0 files changed, 0 insertions, 0 deletions
diff --git a/arch/.gitignore b/arch/.gitignore
index 4191da401dbb..756c19c34f99 100644
--- a/arch/.gitignore
+++ b/arch/.gitignore
@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
-i386
-x86_64
+/i386/
+/x86_64/
diff --git a/arch/Kconfig b/arch/Kconfig
index ecfd3520b676..205fd23e0cad 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -24,20 +24,25 @@ config KEXEC_ELF
 config HAVE_IMA_KEXEC
 	bool
 
-config SET_FS
+config ARCH_HAS_SUBPAGE_FAULTS
 	bool
+	help
+	  Select if the architecture can check permissions at sub-page
+	  granularity (e.g. arm64 MTE). The probe_user_*() functions
+	  must be implemented.
 
 config HOTPLUG_SMT
 	bool
 
 config GENERIC_ENTRY
-       bool
+	bool
 
 config KPROBES
 	bool "Kprobes"
 	depends on MODULES
 	depends on HAVE_KPROBES
 	select KALLSYMS
+	select TASKS_RCU if PREEMPTION
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes
@@ -48,28 +53,28 @@ config KPROBES
 config JUMP_LABEL
 	bool "Optimize very unlikely/likely branches"
 	depends on HAVE_ARCH_JUMP_LABEL
-	depends on CC_HAS_ASM_GOTO
+	select OBJTOOL if HAVE_JUMP_LABEL_HACK
 	help
-	 This option enables a transparent branch optimization that
-	 makes certain almost-always-true or almost-always-false branch
-	 conditions even cheaper to execute within the kernel.
+	  This option enables a transparent branch optimization that
+	  makes certain almost-always-true or almost-always-false branch
+	  conditions even cheaper to execute within the kernel.
 
-	 Certain performance-sensitive kernel code, such as trace points,
-	 scheduler functionality, networking code and KVM have such
-	 branches and include support for this optimization technique.
+	  Certain performance-sensitive kernel code, such as trace points,
+	  scheduler functionality, networking code and KVM have such
+	  branches and include support for this optimization technique.
 
-	 If it is detected that the compiler has support for "asm goto",
-	 the kernel will compile such branches with just a nop
-	 instruction. When the condition flag is toggled to true, the
-	 nop will be converted to a jump instruction to execute the
-	 conditional block of instructions.
+	  If it is detected that the compiler has support for "asm goto",
+	  the kernel will compile such branches with just a nop
+	  instruction. When the condition flag is toggled to true, the
+	  nop will be converted to a jump instruction to execute the
+	  conditional block of instructions.
 
-	 This technique lowers overhead and stress on the branch prediction
-	 of the processor and generally makes the kernel faster. The update
-	 of the condition is slower, but those are always very rare.
+	  This technique lowers overhead and stress on the branch prediction
+	  of the processor and generally makes the kernel faster. The update
+	  of the condition is slower, but those are always very rare.
 
-	 ( On 32-bit x86, the necessary options added to the compiler
-	   flags may increase the size of the kernel slightly. )
+	  ( On 32-bit x86, the necessary options added to the compiler
+	    flags may increase the size of the kernel slightly. )
 
 config STATIC_KEYS_SELFTEST
 	bool "Static key selftest"
@@ -93,9 +98,9 @@ config KPROBES_ON_FTRACE
 	depends on KPROBES && HAVE_KPROBES_ON_FTRACE
 	depends on DYNAMIC_FTRACE_WITH_REGS
 	help
-	 If function tracer is enabled and the arch supports full
-	 passing of pt_regs to function tracing, then kprobes can
-	 optimize on top of function tracing.
+	  If function tracer is enabled and the arch supports full
+	  passing of pt_regs to function tracing, then kprobes can
+	  optimize on top of function tracing.
 
 config UPROBES
 	def_bool n
@@ -149,25 +154,31 @@ config HAVE_EFFICIENT_UNALIGNED_ACCESS
 config ARCH_USE_BUILTIN_BSWAP
 	bool
 	help
-	 Modern versions of GCC (since 4.4) have builtin functions
-	 for handling byte-swapping. Using these, instead of the old
-	 inline assembler that the architecture code provides in the
-	 __arch_bswapXX() macros, allows the compiler to see what's
-	 happening and offers more opportunity for optimisation. In
-	 particular, the compiler will be able to combine the byteswap
-	 with a nearby load or store and use load-and-swap or
-	 store-and-swap instructions if the architecture has them. It
-	 should almost *never* result in code which is worse than the
-	 hand-coded assembler in <asm/swab.h>.  But just in case it
-	 does, the use of the builtins is optional.
+	  Modern versions of GCC (since 4.4) have builtin functions
+	  for handling byte-swapping. Using these, instead of the old
+	  inline assembler that the architecture code provides in the
+	  __arch_bswapXX() macros, allows the compiler to see what's
+	  happening and offers more opportunity for optimisation. In
+	  particular, the compiler will be able to combine the byteswap
+	  with a nearby load or store and use load-and-swap or
+	  store-and-swap instructions if the architecture has them. It
+	  should almost *never* result in code which is worse than the
+	  hand-coded assembler in <asm/swab.h>.  But just in case it
+	  does, the use of the builtins is optional.
 
-	 Any architecture with load-and-swap or store-and-swap
-	 instructions should set this. And it shouldn't hurt to set it
-	 on architectures that don't have such instructions.
+	  Any architecture with load-and-swap or store-and-swap
+	  instructions should set this. And it shouldn't hurt to set it
+	  on architectures that don't have such instructions.
 
 config KRETPROBES
 	def_bool y
-	depends on KPROBES && HAVE_KRETPROBES
+	depends on KPROBES && (HAVE_KRETPROBES || HAVE_RETHOOK)
+
+config KRETPROBE_ON_RETHOOK
+	def_bool y
+	depends on HAVE_RETHOOK
+	depends on KRETPROBES
+	select RETHOOK
 
 config USER_RETURN_NOTIFIER
 	bool
@@ -191,12 +202,29 @@ config HAVE_OPTPROBES
 config HAVE_KPROBES_ON_FTRACE
 	bool
 
+config ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
+	bool
+	help
+	  Since kretprobes modifies return address on the stack, the
+	  stacktrace may see the kretprobe trampoline address instead
+	  of correct one. If the architecture stacktrace code and
+	  unwinder can adjust such entries, select this configuration.
+
 config HAVE_FUNCTION_ERROR_INJECTION
 	bool
 
 config HAVE_NMI
 	bool
 
+config HAVE_FUNCTION_DESCRIPTORS
+	bool
+
+config TRACE_IRQFLAGS_SUPPORT
+	bool
+
+config TRACE_IRQFLAGS_NMI_SUPPORT
+	bool
+
 #
 # An arch should select this if it provides all these things:
 #
@@ -206,9 +234,8 @@ config HAVE_NMI
 #	asm/syscall.h		supplying asm-generic/syscall.h interface
 #	linux/regset.h		user_regset interfaces
 #	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h
-#	TIF_SYSCALL_TRACE	calls tracehook_report_syscall_{entry,exit}
-#	TIF_NOTIFY_RESUME	calls tracehook_notify_resume()
-#	signal delivery		calls tracehook_signal_handler()
+#	TIF_SYSCALL_TRACE	calls ptrace_report_syscall_{entry,exit}
+#	TIF_NOTIFY_RESUME	calls resume_user_mode_work()
 #
 config HAVE_ARCH_TRACEHOOK
 	bool
@@ -285,6 +312,13 @@ config ARCH_THREAD_STACK_ALLOCATOR
 config ARCH_WANTS_DYNAMIC_TASK_STRUCT
 	bool
 
+config ARCH_WANTS_NO_INSTR
+	bool
+	help
+	  An architecture should select this if the noinstr macro is being used on
+	  functions to denote that the toolchain should avoid instrumenting such
+	  functions and is required for correctness.
+
 config ARCH_32BIT_OFF_T
 	bool
 	depends on !64BIT
@@ -321,6 +355,12 @@ config HAVE_RSEQ
 	  This symbol should be selected by an architecture if it
 	  supports an implementation of restartable sequences.
 
+config HAVE_RUST
+	bool
+	help
+	  This symbol should be selected by an architecture if it
+	  supports Rust.
+
 config HAVE_FUNCTION_ARG_ACCESS_API
 	bool
 	help
@@ -406,6 +446,13 @@ config MMU_GATHER_PAGE_SIZE
 
 config MMU_GATHER_NO_RANGE
 	bool
+	select MMU_GATHER_MERGE_VMAS
+
+config MMU_GATHER_NO_FLUSH_CACHE
+	bool
+
+config MMU_GATHER_MERGE_VMAS
+	bool
 
 config MMU_GATHER_NO_GATHER
 	bool
@@ -418,9 +465,44 @@ config ARCH_WANT_IRQS_OFF_ACTIVATE_MM
 	  irqs disabled over activate_mm. Architectures that do IPI based TLB
 	  shootdowns should enable this.
 
+# Use normal mm refcounting for MMU_LAZY_TLB kernel thread references.
+# MMU_LAZY_TLB_REFCOUNT=n can improve the scalability of context switching
+# to/from kernel threads when the same mm is running on a lot of CPUs (a large
+# multi-threaded application), by reducing contention on the mm refcount.
+#
+# This can be disabled if the architecture ensures no CPUs are using an mm as a
+# "lazy tlb" beyond its final refcount (i.e., by the time __mmdrop frees the mm
+# or its kernel page tables). This could be arranged by arch_exit_mmap(), or
+# final exit(2) TLB flush, for example.
+#
+# To implement this, an arch *must*:
+# Ensure the _lazy_tlb variants of mmgrab/mmdrop are used when manipulating
+# the lazy tlb reference of a kthread's ->active_mm (non-arch code has been
+# converted already).
+config MMU_LAZY_TLB_REFCOUNT
+	def_bool y
+	depends on !MMU_LAZY_TLB_SHOOTDOWN
+
+# This option allows MMU_LAZY_TLB_REFCOUNT=n. It ensures no CPUs are using an
+# mm as a lazy tlb beyond its last reference count, by shooting down these
+# users before the mm is deallocated. __mmdrop() first IPIs all CPUs that may
+# be using the mm as a lazy tlb, so that they may switch themselves to using
+# init_mm for their active mm. mm_cpumask(mm) is used to determine which CPUs
+# may be using mm as a lazy tlb mm.
+#
+# To implement this, an arch *must*:
+# - At the time of the final mmdrop of the mm, ensure mm_cpumask(mm) contains
+#   at least all possible CPUs in which the mm is lazy.
+# - It must meet the requirements for MMU_LAZY_TLB_REFCOUNT=n (see above).
+config MMU_LAZY_TLB_SHOOTDOWN
+	bool
+
 config ARCH_HAVE_NMI_SAFE_CMPXCHG
 	bool
 
+config ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
+	bool
+
 config HAVE_ALIGNED_STRUCT_PAGE
 	bool
 	help
@@ -581,21 +663,22 @@ config STACKPROTECTOR_STRONG
 config ARCH_SUPPORTS_SHADOW_CALL_STACK
 	bool
 	help
-	  An architecture should select this if it supports Clang's Shadow
-	  Call Stack and implements runtime support for shadow stack
+	  An architecture should select this if it supports the compiler's
+	  Shadow Call Stack and implements runtime support for shadow stack
 	  switching.
 
 config SHADOW_CALL_STACK
-	bool "Clang Shadow Call Stack"
-	depends on CC_IS_CLANG && ARCH_SUPPORTS_SHADOW_CALL_STACK
-	depends on DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
+	bool "Shadow Call Stack"
+	depends on ARCH_SUPPORTS_SHADOW_CALL_STACK
+	depends on DYNAMIC_FTRACE_WITH_ARGS || DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
 	help
-	  This option enables Clang's Shadow Call Stack, which uses a
-	  shadow stack to protect function return addresses from being
-	  overwritten by an attacker. More information can be found in
-	  Clang's documentation:
+	  This option enables the compiler's Shadow Call Stack, which
+	  uses a shadow stack to protect function return addresses from
+	  being overwritten by an attacker. More information can be found
+	  in the compiler's documentation:
 
-	    https://clang.llvm.org/docs/ShadowCallStack.html
+	  - Clang: https://clang.llvm.org/docs/ShadowCallStack.html
+	  - GCC: https://gcc.gnu.org/onlinedocs/gcc/Instrumentation-Options.html#Instrumentation-Options
 
 	  Note that security guarantees in the kernel differ from the
 	  ones documented for user space. The kernel must store addresses
@@ -603,6 +686,13 @@ config SHADOW_CALL_STACK
 	  reading and writing arbitrary memory may be able to locate them
 	  and hijack control flow by modifying the stacks.
 
+config DYNAMIC_SCS
+	bool
+	help
+	  Set by the arch code if it relies on code patching to insert the
+	  shadow call stack push and pop instructions rather than on the
+	  compiler.
+
 config LTO
 	bool
 	help
@@ -630,9 +720,7 @@ config ARCH_SUPPORTS_LTO_CLANG_THIN
 
 config HAS_LTO_CLANG
 	def_bool y
-	# Clang >= 11: https://github.com/ClangBuiltLinux/linux/issues/510
-	depends on CC_IS_CLANG && CLANG_VERSION >= 110000 && LD_IS_LLD
-	depends on $(success,test $(LLVM_IAS) -eq 1)
+	depends on CC_IS_CLANG && LD_IS_LLD && AS_IS_LLVM
 	depends on $(success,$(NM) --help | head -n 1 | grep -qi llvm)
 	depends on $(success,$(AR) --help | head -n 1 | grep -qi llvm)
 	depends on ARCH_SUPPORTS_LTO_CLANG
@@ -664,13 +752,13 @@ config LTO_CLANG_FULL
 	depends on !COMPILE_TEST
 	select LTO_CLANG
 	help
-          This option enables Clang's full Link Time Optimization (LTO), which
-          allows the compiler to optimize the kernel globally. If you enable
-          this option, the compiler generates LLVM bitcode instead of ELF
-          object files, and the actual compilation from bitcode happens at
-          the LTO link step, which may take several minutes depending on the
-          kernel configuration. More information can be found from LLVM's
-          documentation:
+	  This option enables Clang's full Link Time Optimization (LTO), which
+	  allows the compiler to optimize the kernel globally. If you enable
+	  this option, the compiler generates LLVM bitcode instead of ELF
+	  object files, and the actual compilation from bitcode happens at
+	  the LTO link step, which may take several minutes depending on the
+	  kernel configuration. More information can be found from LLVM's
+	  documentation:
 
 	    https://llvm.org/docs/LinkTimeOptimization.html
 
@@ -692,6 +780,40 @@ config LTO_CLANG_THIN
 	  If unsure, say Y.
 endchoice
 
+config ARCH_SUPPORTS_CFI_CLANG
+	bool
+	help
+	  An architecture should select this option if it can support Clang's
+	  Control-Flow Integrity (CFI) checking.
+
+config ARCH_USES_CFI_TRAPS
+	bool
+
+config CFI_CLANG
+	bool "Use Clang's Control Flow Integrity (CFI)"
+	depends on ARCH_SUPPORTS_CFI_CLANG
+	depends on $(cc-option,-fsanitize=kcfi)
+	help
+	  This option enables Clang’s forward-edge Control Flow Integrity
+	  (CFI) checking, where the compiler injects a runtime check to each
+	  indirect function call to ensure the target is a valid function with
+	  the correct static type. This restricts possible call targets and
+	  makes it more difficult for an attacker to exploit bugs that allow
+	  the modification of stored function pointers. More information can be
+	  found from Clang's documentation:
+
+	    https://clang.llvm.org/docs/ControlFlowIntegrity.html
+
+config CFI_PERMISSIVE
+	bool "Use CFI in permissive mode"
+	depends on CFI_CLANG
+	help
+	  When selected, Control Flow Integrity (CFI) violations result in a
+	  warning instead of a kernel panic. This option should only be used
+	  for finding indirect call type mismatches during development.
+
+	  If unsure, say N.
+
 config HAVE_ARCH_WITHIN_STACK_FRAMES
 	bool
 	help
@@ -701,7 +823,7 @@ config HAVE_ARCH_WITHIN_STACK_FRAMES
 	  and similar) by implementing an inline arch_within_stack_frames(),
 	  which is used by CONFIG_HARDENED_USERCOPY.
 
-config HAVE_CONTEXT_TRACKING
+config HAVE_CONTEXT_TRACKING_USER
 	bool
 	help
 	  Provide kernel/user boundaries probes necessary for subsystems
@@ -709,10 +831,10 @@ config HAVE_CONTEXT_TRACKING
 	  Syscalls need to be wrapped inside user_exit()-user_enter(), either
 	  optimized behind static key or through the slow path using TIF_NOHZ
 	  flag. Exceptions handlers must be wrapped as well. Irqs are already
-	  protected inside rcu_irq_enter/rcu_irq_exit() but preemption or signal
+	  protected inside ct_irq_enter/ct_irq_exit() but preemption or signal
 	  handling on irq exit still need to be protected.
 
-config HAVE_CONTEXT_TRACKING_OFFSTACK
+config HAVE_CONTEXT_TRACKING_USER_OFFSTACK
 	bool
 	help
 	  Architecture neither relies on exception_enter()/exception_exit()
@@ -724,7 +846,7 @@ config HAVE_CONTEXT_TRACKING_OFFSTACK
 
 	  - Critical entry code isn't preemptible (or better yet:
 	    not interruptible).
-	  - No use of RCU read side critical sections, unless rcu_nmi_enter()
+	  - No use of RCU read side critical sections, unless ct_nmi_enter()
 	    got called.
 	  - No use of instrumentation, unless instrumentation_begin() got
 	    called.
@@ -785,6 +907,15 @@ config HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
 config HAVE_ARCH_HUGE_VMAP
 	bool
 
+#
+#  Archs that select this would be capable of PMD-sized vmaps (i.e.,
+#  arch_vmap_pmd_supported() returns true). The VM_ALLOW_HUGE_VMAP flag
+#  must be used to enable allocations to use hugepages.
+#
+config HAVE_ARCH_HUGE_VMALLOC
+	depends on HAVE_ARCH_HUGE_VMAP
+	bool
+
 config ARCH_WANT_HUGE_PMD_SHARE
 	bool
 
@@ -810,6 +941,12 @@ config MODULES_USE_ELF_REL
 	  Modules only use ELF REL relocations.  Modules with ELF RELA
 	  relocations will give an error.
 
+config ARCH_WANTS_MODULES_DATA_IN_VMALLOC
+	bool
+	help
+	  For architectures like powerpc/32 which have constraints on module
+	  allocation and need to allocate module data outside of module area.
+
 config HAVE_IRQ_EXIT_ON_IRQ_STACK
 	bool
 	help
@@ -824,7 +961,17 @@ config HAVE_SOFTIRQ_ON_OWN_STACK
 	bool
 	help
 	  Architecture provides a function to run __do_softirq() on a
-	  seperate stack.
+	  separate stack.
+
+config SOFTIRQ_ON_OWN_STACK
+	def_bool HAVE_SOFTIRQ_ON_OWN_STACK && !PREEMPT_RT
+
+config ALTERNATE_USER_ADDRESS_SPACE
+	bool
+	help
+	  Architectures set this when the CPU uses separate address
+	  spaces for kernel and user space pointers. In this case, the
+	  access_ok() check on a __user pointer is skipped.
 
 config PGTABLE_LEVELS
 	int
@@ -918,6 +1065,18 @@ config HAVE_ARCH_COMPAT_MMAP_BASES
 	  and vice-versa 32-bit applications to call 64-bit mmap().
 	  Required for applications doing different bitness syscalls.
 
+config PAGE_SIZE_LESS_THAN_64KB
+	def_bool y
+	depends on !ARM64_64K_PAGES
+	depends on !IA64_PAGE_SIZE_64KB
+	depends on !PAGE_SIZE_64KB
+	depends on !PARISC_PAGE_SIZE_64KB
+	depends on PAGE_SIZE_LESS_THAN_256KB
+
+config PAGE_SIZE_LESS_THAN_256KB
+	def_bool y
+	depends on !PAGE_SIZE_256KB
+
 # This allows to use a set of generic functions to determine mmap base
 # address by giving priority to top-down scheme only if the process
 # is not in legacy mode (compat task, unlimited stack size or
@@ -929,11 +1088,27 @@ config ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
 	depends on MMU
 	select ARCH_HAS_ELF_RANDOMIZE
 
+config HAVE_OBJTOOL
+	bool
+
+config HAVE_JUMP_LABEL_HACK
+	bool
+
+config HAVE_NOINSTR_HACK
+	bool
+
+config HAVE_NOINSTR_VALIDATION
+	bool
+
+config HAVE_UACCESS_VALIDATION
+	bool
+	select OBJTOOL
+
 config HAVE_STACK_VALIDATION
 	bool
 	help
-	  Architecture supports the 'objtool check' host tool command, which
-	  performs compile-time stack metadata validation.
+	  Architecture supports objtool compile-time frame pointer rule
+	  validation.
 
 config HAVE_RELIABLE_STACKTRACE
 	bool
@@ -1013,6 +1188,13 @@ config COMPAT_32BIT_TIME
 config ARCH_NO_PREEMPT
 	bool
 
+config ARCH_EPHEMERAL_INODES
+	def_bool n
+	help
+	  An arch should select this symbol if it doesn't keep track of inode
+	  instances on its own, but instead relies on something else (e.g. the
+	  host kernel for an UML kernel).
+
 config ARCH_SUPPORTS_RT
 	bool
 
@@ -1054,6 +1236,43 @@ config VMAP_STACK
 	  backing virtual mappings with real shadow memory, and KASAN_VMALLOC
 	  must be enabled.
 
+config HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
+	def_bool n
+	help
+	  An arch should select this symbol if it can support kernel stack
+	  offset randomization with calls to add_random_kstack_offset()
+	  during syscall entry and choose_random_kstack_offset() during
+	  syscall exit. Careful removal of -fstack-protector-strong and
+	  -fstack-protector should also be applied to the entry code and
+	  closely examined, as the artificial stack bump looks like an array
+	  to the compiler, so it will attempt to add canary checks regardless
+	  of the static branch state.
+
+config RANDOMIZE_KSTACK_OFFSET
+	bool "Support for randomizing kernel stack offset on syscall entry" if EXPERT
+	default y
+	depends on HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
+	depends on INIT_STACK_NONE || !CC_IS_CLANG || CLANG_VERSION >= 140000
+	help
+	  The kernel stack offset can be randomized (after pt_regs) by
+	  roughly 5 bits of entropy, frustrating memory corruption
+	  attacks that depend on stack address determinism or
+	  cross-syscall address exposures.
+
+	  The feature is controlled via the "randomize_kstack_offset=on/off"
+	  kernel boot param, and if turned off has zero overhead due to its use
+	  of static branches (see JUMP_LABEL).
+
+	  If unsure, say Y.
+
+config RANDOMIZE_KSTACK_OFFSET_DEFAULT
+	bool "Default state of kernel stack offset randomization"
+	depends on RANDOMIZE_KSTACK_OFFSET
+	help
+	  Kernel stack offset randomization is controlled by kernel boot param
+	  "randomize_kstack_offset=on/off", and this config chooses the default
+	  boot state.
+
 config ARCH_OPTIONAL_KERNEL_RWX
 	def_bool n
 
@@ -1139,10 +1358,13 @@ config RELR
 config ARCH_HAS_MEM_ENCRYPT
 	bool
 
+config ARCH_HAS_CC_PLATFORM
+	bool
+
 config HAVE_SPARSE_SYSCALL_NR
-       bool
-       help
-          An architecture should select this if its syscall numbering is sparse
+	bool
+	help
+	  An architecture should select this if its syscall numbering is sparse
 	  to save space. For example, MIPS architecture has a syscall array with
 	  entries at 4000, 5000 and 6000 locations. This option turns on syscall
 	  related optimizations for a given architecture.
@@ -1156,15 +1378,45 @@ config HAVE_STATIC_CALL
 config HAVE_STATIC_CALL_INLINE
 	bool
 	depends on HAVE_STATIC_CALL
+	select OBJTOOL
 
 config HAVE_PREEMPT_DYNAMIC
 	bool
+
+config HAVE_PREEMPT_DYNAMIC_CALL
+	bool
 	depends on HAVE_STATIC_CALL
-	depends on GENERIC_ENTRY
+	select HAVE_PREEMPT_DYNAMIC
 	help
-	   Select this if the architecture support boot time preempt setting
-	   on top of static calls. It is strongly advised to support inline
-	   static call to avoid any overhead.
+	  An architecture should select this if it can handle the preemption
+	  model being selected at boot time using static calls.
+
+	  Where an architecture selects HAVE_STATIC_CALL_INLINE, any call to a
+	  preemption function will be patched directly.
+
+	  Where an architecture does not select HAVE_STATIC_CALL_INLINE, any
+	  call to a preemption function will go through a trampoline, and the
+	  trampoline will be patched.
+
+	  It is strongly advised to support inline static call to avoid any
+	  overhead.
+
+config HAVE_PREEMPT_DYNAMIC_KEY
+	bool
+	depends on HAVE_ARCH_JUMP_LABEL
+	select HAVE_PREEMPT_DYNAMIC
+	help
+	  An architecture should select this if it can handle the preemption
+	  model being selected at boot time using static keys.
+
+	  Each preemption function will be given an early return based on a
+	  static key. This should have slightly lower overhead than non-inline
+	  static calls, as this effectively inlines each trampoline into the
+	  start of its callee. This may avoid redundant work, and may
+	  integrate better with CFI schemes.
+
+	  This will have greater overhead than using inline static calls as
+	  the call to the preemption function cannot be entirely elided.
 
 config ARCH_WANT_LD_ORPHAN_WARN
 	bool
@@ -1181,17 +1433,65 @@ config HAVE_ARCH_PFN_VALID
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	bool
 
+config ARCH_SUPPORTS_PAGE_TABLE_CHECK
+	bool
+
 config ARCH_SPLIT_ARG64
 	bool
 	help
-	   If a 32-bit architecture requires 64-bit arguments to be split into
-	   pairs of 32-bit arguments, select this option.
+	  If a 32-bit architecture requires 64-bit arguments to be split into
+	  pairs of 32-bit arguments, select this option.
 
 config ARCH_HAS_ELFCORE_COMPAT
 	bool
 
+config ARCH_HAS_PARANOID_L1D_FLUSH
+	bool
+
+config ARCH_HAVE_TRACE_MMIO_ACCESS
+	bool
+
+config DYNAMIC_SIGFRAME
+	bool
+
+# Select, if arch has a named attribute group bound to NUMA device nodes.
+config HAVE_ARCH_NODE_DEV_GROUP
+	bool
+
+config ARCH_HAS_NONLEAF_PMD_YOUNG
+	bool
+	help
+	  Architectures that select this option are capable of setting the
+	  accessed bit in non-leaf PMD entries when using them as part of linear
+	  address translations. Page table walkers that clear the accessed bit
+	  may use this capability to reduce their search space.
+
 source "kernel/gcov/Kconfig"
 
 source "scripts/gcc-plugins/Kconfig"
 
+config FUNCTION_ALIGNMENT_4B
+	bool
+
+config FUNCTION_ALIGNMENT_8B
+	bool
+
+config FUNCTION_ALIGNMENT_16B
+	bool
+
+config FUNCTION_ALIGNMENT_32B
+	bool
+
+config FUNCTION_ALIGNMENT_64B
+	bool
+
+config FUNCTION_ALIGNMENT
+	int
+	default 64 if FUNCTION_ALIGNMENT_64B
+	default 32 if FUNCTION_ALIGNMENT_32B
+	default 16 if FUNCTION_ALIGNMENT_16B
+	default 8 if FUNCTION_ALIGNMENT_8B
+	default 4 if FUNCTION_ALIGNMENT_4B
+	default 0
+
 endmenu
diff --git a/arch/alpha/Kbuild b/arch/alpha/Kbuild
new file mode 100644
index 000000000000..345d79df24bb
--- /dev/null
+++ b/arch/alpha/Kbuild
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y			+= kernel/ mm/
+obj-$(CONFIG_MATHEMU)	+= math-emu/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 5998106faa60..a5c2b1aa46b0 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -3,6 +3,7 @@ config ALPHA
 	bool
 	default y
 	select ARCH_32BIT_USTAT_F_TINODE
+	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select ARCH_NO_PREEMPT
@@ -12,16 +13,13 @@ config ALPHA
 	select FORCE_PCI if !ALPHA_JENSEN
 	select PCI_DOMAINS if PCI
 	select PCI_SYSCALL if PCI
-	select HAVE_AOUT
 	select HAVE_ASM_MODVERSIONS
-	select HAVE_IDE
 	select HAVE_PCSPKR_PLATFORM
 	select HAVE_PERF_EVENTS
 	select NEED_DMA_MAP_STATE
 	select NEED_SG_DMA_LENGTH
-	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
-	select GENERIC_PCI_IOMAP if PCI
+	select GENERIC_PCI_IOMAP
 	select AUTO_IRQ_AFFINITY if SMP
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION
@@ -29,8 +27,7 @@ config ALPHA
 	select AUDIT_ARCH
 	select GENERIC_CPU_VULNERABILITIES
 	select GENERIC_SMP_IDLE_THREAD
-	select GENERIC_STRNCPY_FROM_USER
-	select GENERIC_STRNLEN_USER
+	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_MOD_ARCH_SPECIFIC
 	select MODULES_USE_ELF_RELA
@@ -38,8 +35,8 @@ config ALPHA
 	select OLD_SIGSUSPEND
 	select CPU_NO_EFFICIENT_FFS if !ALPHA_EV67
 	select MMU_GATHER_NO_RANGE
-	select SET_FS
 	select SPARSEMEM_EXTREME if SPARSEMEM
+	select ZONE_DMA
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,
@@ -65,10 +62,6 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config ZONE_DMA
-	bool
-	default y
-
 config GENERIC_ISA_DMA
 	bool
 	default y
@@ -205,7 +198,6 @@ config ALPHA_EIGER
 
 config ALPHA_JENSEN
 	bool "Jensen"
-	depends on BROKEN
 	select HAVE_EISA
 	help
 	  DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
@@ -535,7 +527,7 @@ config SMP
 	  will run faster if you say N here.
 
 	  See also the SMP-HOWTO available at
-	  <http://www.tldp.org/docs.html#howto>.
+	  <https://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
 
@@ -549,29 +541,12 @@ config NR_CPUS
 	  MARVEL support can handle a maximum of 32 CPUs, all the others
 	  with working support have a maximum of 4 CPUs.
 
-config ARCH_DISCONTIGMEM_ENABLE
-	bool "Discontiguous Memory Support"
-	depends on BROKEN
-	help
-	  Say Y to support efficient handling of discontiguous physical memory,
-	  for architectures which are either NUMA (Non-Uniform Memory Access)
-	  or have huge holes in the physical address space for other reasons.
-	  See <file:Documentation/vm/numa.rst> for more.
-
 config ARCH_SPARSEMEM_ENABLE
 	bool "Sparse Memory Support"
 	help
 	  Say Y to support efficient handling of discontiguous physical memory,
 	  for systems that have huge holes in the physical address space.
 
-config NUMA
-	bool "NUMA Support (EXPERIMENTAL)"
-	depends on DISCONTIGMEM && BROKEN
-	help
-	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
-	  Access).  This option is for configuring high-end multiprocessor
-	  server machines.  If in doubt, say N.
-
 config ALPHA_WTINT
 	bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
 	default y if ALPHA_QEMU
@@ -596,11 +571,6 @@ config ALPHA_WTINT
 
 	  If unsure, say N.
 
-config NODES_SHIFT
-	int
-	default "7"
-	depends on NEED_MULTIPLE_NODES
-
 # LARGE_VMALLOC is racy, if you *really* need it then fix it first
 config ALPHA_LARGE_VMALLOC
 	bool
diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile
index c2946431d88d..45158024085e 100644
--- a/arch/alpha/Makefile
+++ b/arch/alpha/Makefile
@@ -36,10 +36,6 @@ cflags-y				+= $(cpuflags-y)
 # BWX is most important, but we don't really want any emulation ever.
 KBUILD_CFLAGS += $(cflags-y) -Wa,-mev6
 
-head-y := arch/alpha/kernel/head.o
-
-core-y				+= arch/alpha/kernel/ arch/alpha/mm/
-core-$(CONFIG_MATHEMU)		+= arch/alpha/math-emu/
 libs-y				+= arch/alpha/lib/
 
 # export what is needed by arch/alpha/boot/Makefile
@@ -57,9 +53,6 @@ $(boot)/vmlinux.gz: vmlinux
 bootimage bootpfile bootpzfile: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
-
 archheaders:
 	$(Q)$(MAKE) $(build)=arch/alpha/kernel/syscalls all
 
diff --git a/arch/alpha/boot/bootp.c b/arch/alpha/boot/bootp.c
index 00266e6e1b71..842e85776cc0 100644
--- a/arch/alpha/boot/bootp.c
+++ b/arch/alpha/boot/bootp.c
@@ -18,12 +18,12 @@
 #include <asm/hwrpb.h>
 #include <asm/io.h>
 
-#include <stdarg.h>
+#include <linux/stdarg.h>
 
 #include "ksize.h"
 
 extern unsigned long switch_to_osf_pal(unsigned long nr,
-	struct pcb_struct * pcb_va, struct pcb_struct * pcb_pa,
+	struct pcb_struct *pcb_va, struct pcb_struct *pcb_pa,
 	unsigned long *vptb);
 
 extern void move_stack(unsigned long new_stack);
diff --git a/arch/alpha/boot/bootpz.c b/arch/alpha/boot/bootpz.c
index 43af71835adf..c6079308eab3 100644
--- a/arch/alpha/boot/bootpz.c
+++ b/arch/alpha/boot/bootpz.c
@@ -20,7 +20,7 @@
 #include <asm/hwrpb.h>
 #include <asm/io.h>
 
-#include <stdarg.h>
+#include <linux/stdarg.h>
 
 #include "kzsize.h"
 
@@ -200,7 +200,7 @@ extern char _end;
 	START_ADDR	KSEG address of the entry point of kernel code.
 
 	ZERO_PGE	KSEG address of page full of zeroes, but 
-			upon entry to kerne cvan be expected
+			upon entry to kernel, it can be expected
 			to hold the parameter list and possible
 			INTRD information.
 
diff --git a/arch/alpha/boot/main.c b/arch/alpha/boot/main.c
index e5347a080008..22a1cb0264af 100644
--- a/arch/alpha/boot/main.c
+++ b/arch/alpha/boot/main.c
@@ -15,7 +15,7 @@
 #include <asm/console.h>
 #include <asm/hwrpb.h>
 
-#include <stdarg.h>
+#include <linux/stdarg.h>
 
 #include "ksize.h"
 
diff --git a/arch/alpha/boot/misc.c b/arch/alpha/boot/misc.c
index d65192202703..1ab91852d9f7 100644
--- a/arch/alpha/boot/misc.c
+++ b/arch/alpha/boot/misc.c
@@ -30,7 +30,7 @@ extern long srm_printk(const char *, ...)
      __attribute__ ((format (printf, 1, 2)));
 
 /*
- * gzip delarations
+ * gzip declarations
  */
 #define OF(args)  args
 #define STATIC static
@@ -89,8 +89,6 @@ static ulg output_ptr;
 static ulg bytes_out;
 
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern int end;
 static ulg free_mem_ptr;
diff --git a/arch/alpha/boot/stdio.c b/arch/alpha/boot/stdio.c
index 60f73ccd2e89..faa5234b90b8 100644
--- a/arch/alpha/boot/stdio.c
+++ b/arch/alpha/boot/stdio.c
@@ -2,8 +2,8 @@
 /*
  * Copyright (C) Paul Mackerras 1997.
  */
-#include <stdarg.h>
-#include <stddef.h>
+#include <linux/string.h>
+#include <linux/stdarg.h>
 
 size_t strnlen(const char * s, size_t count)
 {
@@ -42,8 +42,8 @@ static int skip_atoi(const char **s)
 
 static char * number(char * str, unsigned long long num, int base, int size, int precision, int type)
 {
-	char c,sign,tmp[66];
-	const char *digits="0123456789abcdefghijklmnopqrstuvwxyz";
+	char c, sign, tmp[66];
+	const char *digits = "0123456789abcdefghijklmnopqrstuvwxyz";
 	int i;
 
 	if (type & LARGE)
@@ -83,14 +83,14 @@ static char * number(char * str, unsigned long long num, int base, int size, int
 		precision = i;
 	size -= precision;
 	if (!(type&(ZEROPAD+LEFT)))
-		while(size-->0)
+		while (size-- > 0)
 			*str++ = ' ';
 	if (sign)
 		*str++ = sign;
 	if (type & SPECIAL) {
 		if (base==8)
 			*str++ = '0';
-		else if (base==16) {
+		else if (base == 16) {
 			*str++ = '0';
 			*str++ = digits[33];
 		}
@@ -125,7 +125,7 @@ int vsprintf(char *buf, const char *fmt, va_list args)
 				/* 'z' changed to 'Z' --davidm 1/25/99 */
 
 
-	for (str=buf ; *fmt ; ++fmt) {
+	for (str = buf ; *fmt ; ++fmt) {
 		if (*fmt != '%') {
 			*str++ = *fmt;
 			continue;
@@ -296,7 +296,7 @@ int sprintf(char * buf, const char *fmt, ...)
 	int i;
 
 	va_start(args, fmt);
-	i=vsprintf(buf,fmt,args);
+	i = vsprintf(buf, fmt, args);
 	va_end(args);
 	return i;
 }
diff --git a/arch/alpha/boot/tools/objstrip.c b/arch/alpha/boot/tools/objstrip.c
index 08b430d25a31..7cf92d172dce 100644
--- a/arch/alpha/boot/tools/objstrip.c
+++ b/arch/alpha/boot/tools/objstrip.c
@@ -148,7 +148,7 @@ main (int argc, char *argv[])
 #ifdef __ELF__
     elf = (struct elfhdr *) buf;
 
-    if (elf->e_ident[0] == 0x7f && str_has_prefix((char *)elf->e_ident + 1, "ELF")) {
+    if (memcmp(&elf->e_ident[EI_MAG0], ELFMAG, SELFMAG) == 0) {
 	if (elf->e_type != ET_EXEC) {
 	    fprintf(stderr, "%s: %s is not an ELF executable\n",
 		    prog_name, inname);
diff --git a/arch/alpha/configs/defconfig b/arch/alpha/configs/defconfig
index 724c4075df40..1816c1dc22b1 100644
--- a/arch/alpha/configs/defconfig
+++ b/arch/alpha/configs/defconfig
@@ -25,29 +25,26 @@ CONFIG_PNP=y
 CONFIG_ISAPNP=y
 CONFIG_BLK_DEV_FD=y
 CONFIG_BLK_DEV_LOOP=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_ALI15X3=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_CY82C693=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_SCSI_AIC7XXX=m
 CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_PATA_ALI=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-CONFIG_NET_ETHERNET=y
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
 CONFIG_NET_TULIP=y
 CONFIG_DE2104X=m
 CONFIG_TULIP=y
 CONFIG_TULIP_MMIO=y
-CONFIG_NET_PCI=y
 CONFIG_YELLOWFIN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
@@ -63,11 +60,11 @@ CONFIG_TMPFS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_ALPHA_LEGACY_START_ADDRESS=y
 CONFIG_MATHEMU=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_DEVTMPFS=y
diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild
index 42911c8340c7..dd31e97edae8 100644
--- a/arch/alpha/include/asm/Kbuild
+++ b/arch/alpha/include/asm/Kbuild
@@ -1,6 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 
 generated-y += syscall_table.h
+generic-y += agp.h
+generic-y += asm-offsets.h
 generic-y += export.h
 generic-y += kvm_para.h
 generic-y += mcs_spinlock.h
diff --git a/arch/alpha/include/asm/a.out.h b/arch/alpha/include/asm/a.out.h
deleted file mode 100644
index d2346b7caff1..000000000000
--- a/arch/alpha/include/asm/a.out.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_A_OUT_H__
-#define __ALPHA_A_OUT_H__
-
-#include <uapi/asm/a.out.h>
-
-
-/* Assume that start addresses below 4G belong to a TASO application.
-   Unfortunately, there is no proper bit in the exec header to check.
-   Worse, we have to notice the start address before swapping to use
-   /sbin/loader, which of course is _not_ a TASO application.  */
-#define SET_AOUT_PERSONALITY(BFPM, EX) \
-	set_personality (((BFPM->taso || EX.ah.entry < 0x100000000L \
-			   ? ADDR_LIMIT_32BIT : 0) | PER_OSF4))
-
-#endif /* __A_OUT_GNU_H__ */
diff --git a/arch/alpha/include/asm/agp.h b/arch/alpha/include/asm/agp.h
deleted file mode 100644
index 7173eada1567..000000000000
--- a/arch/alpha/include/asm/agp.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef AGP_H
-#define AGP_H 1
-
-#include <asm/io.h>
-
-/* dummy for now */
-
-#define map_page_into_agp(page) 
-#define unmap_page_from_agp(page) 
-#define flush_agp_cache() mb()
-
-/* GATT allocation. Returns/accepts GATT kernel virtual address. */
-#define alloc_gatt_pages(order)		\
-	((char *)__get_free_pages(GFP_KERNEL, (order)))
-#define free_gatt_pages(table, order)	\
-	free_pages((unsigned long)(table), (order))
-
-#endif
diff --git a/arch/alpha/include/asm/asm-offsets.h b/arch/alpha/include/asm/asm-offsets.h
deleted file mode 100644
index d370ee36a182..000000000000
--- a/arch/alpha/include/asm/asm-offsets.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <generated/asm-offsets.h>
diff --git a/arch/alpha/include/asm/asm-prototypes.h b/arch/alpha/include/asm/asm-prototypes.h
index b34cc1f06720..c8ae46fc2e74 100644
--- a/arch/alpha/include/asm/asm-prototypes.h
+++ b/arch/alpha/include/asm/asm-prototypes.h
@@ -16,3 +16,4 @@ extern void __divlu(void);
 extern void __remlu(void);
 extern void __divqu(void);
 extern void __remqu(void);
+extern unsigned long __udiv_qrnnd(unsigned long *, unsigned long, unsigned long , unsigned long);
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h
index e41c113c6688..f2861a43a61e 100644
--- a/arch/alpha/include/asm/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
@@ -26,11 +26,11 @@
 
 #define ATOMIC64_INIT(i)	{ (i) }
 
-#define atomic_read(v)		READ_ONCE((v)->counter)
-#define atomic64_read(v)	READ_ONCE((v)->counter)
+#define arch_atomic_read(v)	READ_ONCE((v)->counter)
+#define arch_atomic64_read(v)	READ_ONCE((v)->counter)
 
-#define atomic_set(v,i)		WRITE_ONCE((v)->counter, (i))
-#define atomic64_set(v,i)	WRITE_ONCE((v)->counter, (i))
+#define arch_atomic_set(v,i)	WRITE_ONCE((v)->counter, (i))
+#define arch_atomic64_set(v,i)	WRITE_ONCE((v)->counter, (i))
 
 /*
  * To get proper branch prediction for the main line, we must branch
@@ -39,7 +39,7 @@
  */
 
 #define ATOMIC_OP(op, asm_op)						\
-static __inline__ void atomic_##op(int i, atomic_t * v)			\
+static __inline__ void arch_atomic_##op(int i, atomic_t * v)		\
 {									\
 	unsigned long temp;						\
 	__asm__ __volatile__(						\
@@ -55,7 +55,7 @@ static __inline__ void atomic_##op(int i, atomic_t * v)			\
 }									\
 
 #define ATOMIC_OP_RETURN(op, asm_op)					\
-static inline int atomic_##op##_return_relaxed(int i, atomic_t *v)	\
+static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v)	\
 {									\
 	long temp, result;						\
 	__asm__ __volatile__(						\
@@ -74,7 +74,7 @@ static inline int atomic_##op##_return_relaxed(int i, atomic_t *v)	\
 }
 
 #define ATOMIC_FETCH_OP(op, asm_op)					\
-static inline int atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
+static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
 {									\
 	long temp, result;						\
 	__asm__ __volatile__(						\
@@ -92,7 +92,7 @@ static inline int atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
 }
 
 #define ATOMIC64_OP(op, asm_op)						\
-static __inline__ void atomic64_##op(s64 i, atomic64_t * v)		\
+static __inline__ void arch_atomic64_##op(s64 i, atomic64_t * v)	\
 {									\
 	s64 temp;							\
 	__asm__ __volatile__(						\
@@ -108,7 +108,8 @@ static __inline__ void atomic64_##op(s64 i, atomic64_t * v)		\
 }									\
 
 #define ATOMIC64_OP_RETURN(op, asm_op)					\
-static __inline__ s64 atomic64_##op##_return_relaxed(s64 i, atomic64_t * v)	\
+static __inline__ s64							\
+arch_atomic64_##op##_return_relaxed(s64 i, atomic64_t * v)		\
 {									\
 	s64 temp, result;						\
 	__asm__ __volatile__(						\
@@ -127,7 +128,8 @@ static __inline__ s64 atomic64_##op##_return_relaxed(s64 i, atomic64_t * v)	\
 }
 
 #define ATOMIC64_FETCH_OP(op, asm_op)					\
-static __inline__ s64 atomic64_fetch_##op##_relaxed(s64 i, atomic64_t * v)	\
+static __inline__ s64							\
+arch_atomic64_fetch_##op##_relaxed(s64 i, atomic64_t * v)		\
 {									\
 	s64 temp, result;						\
 	__asm__ __volatile__(						\
@@ -155,18 +157,18 @@ static __inline__ s64 atomic64_fetch_##op##_relaxed(s64 i, atomic64_t * v)	\
 ATOMIC_OPS(add)
 ATOMIC_OPS(sub)
 
-#define atomic_add_return_relaxed	atomic_add_return_relaxed
-#define atomic_sub_return_relaxed	atomic_sub_return_relaxed
-#define atomic_fetch_add_relaxed	atomic_fetch_add_relaxed
-#define atomic_fetch_sub_relaxed	atomic_fetch_sub_relaxed
+#define arch_atomic_add_return_relaxed		arch_atomic_add_return_relaxed
+#define arch_atomic_sub_return_relaxed		arch_atomic_sub_return_relaxed
+#define arch_atomic_fetch_add_relaxed		arch_atomic_fetch_add_relaxed
+#define arch_atomic_fetch_sub_relaxed		arch_atomic_fetch_sub_relaxed
 
-#define atomic64_add_return_relaxed	atomic64_add_return_relaxed
-#define atomic64_sub_return_relaxed	atomic64_sub_return_relaxed
-#define atomic64_fetch_add_relaxed	atomic64_fetch_add_relaxed
-#define atomic64_fetch_sub_relaxed	atomic64_fetch_sub_relaxed
+#define arch_atomic64_add_return_relaxed	arch_atomic64_add_return_relaxed
+#define arch_atomic64_sub_return_relaxed	arch_atomic64_sub_return_relaxed
+#define arch_atomic64_fetch_add_relaxed		arch_atomic64_fetch_add_relaxed
+#define arch_atomic64_fetch_sub_relaxed		arch_atomic64_fetch_sub_relaxed
 
-#define atomic_andnot atomic_andnot
-#define atomic64_andnot atomic64_andnot
+#define arch_atomic_andnot			arch_atomic_andnot
+#define arch_atomic64_andnot			arch_atomic64_andnot
 
 #undef ATOMIC_OPS
 #define ATOMIC_OPS(op, asm)						\
@@ -180,15 +182,15 @@ ATOMIC_OPS(andnot, bic)
 ATOMIC_OPS(or, bis)
 ATOMIC_OPS(xor, xor)
 
-#define atomic_fetch_and_relaxed	atomic_fetch_and_relaxed
-#define atomic_fetch_andnot_relaxed	atomic_fetch_andnot_relaxed
-#define atomic_fetch_or_relaxed		atomic_fetch_or_relaxed
-#define atomic_fetch_xor_relaxed	atomic_fetch_xor_relaxed
+#define arch_atomic_fetch_and_relaxed		arch_atomic_fetch_and_relaxed
+#define arch_atomic_fetch_andnot_relaxed	arch_atomic_fetch_andnot_relaxed
+#define arch_atomic_fetch_or_relaxed		arch_atomic_fetch_or_relaxed
+#define arch_atomic_fetch_xor_relaxed		arch_atomic_fetch_xor_relaxed
 
-#define atomic64_fetch_and_relaxed	atomic64_fetch_and_relaxed
-#define atomic64_fetch_andnot_relaxed	atomic64_fetch_andnot_relaxed
-#define atomic64_fetch_or_relaxed	atomic64_fetch_or_relaxed
-#define atomic64_fetch_xor_relaxed	atomic64_fetch_xor_relaxed
+#define arch_atomic64_fetch_and_relaxed		arch_atomic64_fetch_and_relaxed
+#define arch_atomic64_fetch_andnot_relaxed	arch_atomic64_fetch_andnot_relaxed
+#define arch_atomic64_fetch_or_relaxed		arch_atomic64_fetch_or_relaxed
+#define arch_atomic64_fetch_xor_relaxed		arch_atomic64_fetch_xor_relaxed
 
 #undef ATOMIC_OPS
 #undef ATOMIC64_FETCH_OP
@@ -198,14 +200,18 @@ ATOMIC_OPS(xor, xor)
 #undef ATOMIC_OP_RETURN
 #undef ATOMIC_OP
 
-#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+#define arch_atomic64_cmpxchg(v, old, new) \
+	(arch_cmpxchg(&((v)->counter), old, new))
+#define arch_atomic64_xchg(v, new) \
+	(arch_xchg(&((v)->counter), new))
 
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define arch_atomic_cmpxchg(v, old, new) \
+	(arch_cmpxchg(&((v)->counter), old, new))
+#define arch_atomic_xchg(v, new) \
+	(arch_xchg(&((v)->counter), new))
 
 /**
- * atomic_fetch_add_unless - add unless the number is a given value
+ * arch_atomic_fetch_add_unless - add unless the number is a given value
  * @v: pointer of type atomic_t
  * @a: the amount to add to v...
  * @u: ...unless v is equal to u.
@@ -213,7 +219,7 @@ ATOMIC_OPS(xor, xor)
  * Atomically adds @a to @v, so long as it was not @u.
  * Returns the old value of @v.
  */
-static __inline__ int atomic_fetch_add_unless(atomic_t *v, int a, int u)
+static __inline__ int arch_atomic_fetch_add_unless(atomic_t *v, int a, int u)
 {
 	int c, new, old;
 	smp_mb();
@@ -234,10 +240,10 @@ static __inline__ int atomic_fetch_add_unless(atomic_t *v, int a, int u)
 	smp_mb();
 	return old;
 }
-#define atomic_fetch_add_unless atomic_fetch_add_unless
+#define arch_atomic_fetch_add_unless arch_atomic_fetch_add_unless
 
 /**
- * atomic64_fetch_add_unless - add unless the number is a given value
+ * arch_atomic64_fetch_add_unless - add unless the number is a given value
  * @v: pointer of type atomic64_t
  * @a: the amount to add to v...
  * @u: ...unless v is equal to u.
@@ -245,7 +251,7 @@ static __inline__ int atomic_fetch_add_unless(atomic_t *v, int a, int u)
  * Atomically adds @a to @v, so long as it was not @u.
  * Returns the old value of @v.
  */
-static __inline__ s64 atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
+static __inline__ s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
 {
 	s64 c, new, old;
 	smp_mb();
@@ -266,16 +272,16 @@ static __inline__ s64 atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
 	smp_mb();
 	return old;
 }
-#define atomic64_fetch_add_unless atomic64_fetch_add_unless
+#define arch_atomic64_fetch_add_unless arch_atomic64_fetch_add_unless
 
 /*
- * atomic64_dec_if_positive - decrement by 1 if old value positive
+ * arch_atomic64_dec_if_positive - decrement by 1 if old value positive
  * @v: pointer of type atomic_t
  *
  * The function returns the old value of *v minus 1, even if
  * the atomic variable, v, was not decremented.
  */
-static inline s64 atomic64_dec_if_positive(atomic64_t *v)
+static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 {
 	s64 old, tmp;
 	smp_mb();
@@ -295,6 +301,6 @@ static inline s64 atomic64_dec_if_positive(atomic64_t *v)
 	smp_mb();
 	return old - 1;
 }
-#define atomic64_dec_if_positive atomic64_dec_if_positive
+#define arch_atomic64_dec_if_positive arch_atomic64_dec_if_positive
 
 #endif /* _ALPHA_ATOMIC_H */
diff --git a/arch/alpha/include/asm/bitops.h b/arch/alpha/include/asm/bitops.h
index 5adca78830b5..bafb1c1f0fdc 100644
--- a/arch/alpha/include/asm/bitops.h
+++ b/arch/alpha/include/asm/bitops.h
@@ -46,8 +46,8 @@ set_bit(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static inline void
-__set_bit(unsigned long nr, volatile void * addr)
+static __always_inline void
+arch___set_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	int *m = ((int *) addr) + (nr >> 5);
 
@@ -82,8 +82,8 @@ clear_bit_unlock(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static __inline__ void
-__clear_bit(unsigned long nr, volatile void * addr)
+static __always_inline void
+arch___clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	int *m = ((int *) addr) + (nr >> 5);
 
@@ -94,7 +94,7 @@ static inline void
 __clear_bit_unlock(unsigned long nr, volatile void * addr)
 {
 	smp_mb();
-	__clear_bit(nr, addr);
+	arch___clear_bit(nr, addr);
 }
 
 static inline void
@@ -118,8 +118,8 @@ change_bit(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static __inline__ void
-__change_bit(unsigned long nr, volatile void * addr)
+static __always_inline void
+arch___change_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	int *m = ((int *) addr) + (nr >> 5);
 
@@ -186,8 +186,8 @@ test_and_set_bit_lock(unsigned long nr, volatile void *addr)
 /*
  * WARNING: non atomic version.
  */
-static inline int
-__test_and_set_bit(unsigned long nr, volatile void * addr)
+static __always_inline bool
+arch___test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = 1 << (nr & 0x1f);
 	int *m = ((int *) addr) + (nr >> 5);
@@ -230,8 +230,8 @@ test_and_clear_bit(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static inline int
-__test_and_clear_bit(unsigned long nr, volatile void * addr)
+static __always_inline bool
+arch___test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = 1 << (nr & 0x1f);
 	int *m = ((int *) addr) + (nr >> 5);
@@ -272,8 +272,8 @@ test_and_change_bit(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static __inline__ int
-__test_and_change_bit(unsigned long nr, volatile void * addr)
+static __always_inline bool
+arch___test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = 1 << (nr & 0x1f);
 	int *m = ((int *) addr) + (nr >> 5);
@@ -283,11 +283,8 @@ __test_and_change_bit(unsigned long nr, volatile void * addr)
 	return (old & mask) != 0;
 }
 
-static inline int
-test_bit(int nr, const volatile void * addr)
-{
-	return (1UL & (((const int *) addr)[nr >> 5] >> (nr & 31))) != 0UL;
-}
+#define arch_test_bit generic_test_bit
+#define arch_test_bit_acquire generic_test_bit_acquire
 
 /*
  * ffz = Find First Zero in word. Undefined if no zero exists,
@@ -430,8 +427,6 @@ static inline unsigned int __arch_hweight8(unsigned int w)
 
 #endif /* __KERNEL__ */
 
-#include <asm-generic/bitops/find.h>
-
 #ifdef __KERNEL__
 
 /*
@@ -452,6 +447,8 @@ sched_find_first_bit(const unsigned long b[2])
 	return __ffs(tmp) + ofs;
 }
 
+#include <asm-generic/bitops/non-instrumented-non-atomic.h>
+
 #include <asm-generic/bitops/le.h>
 
 #include <asm-generic/bitops/ext2-atomic-setbit.h>
diff --git a/arch/alpha/include/asm/cmpxchg.h b/arch/alpha/include/asm/cmpxchg.h
index 6c7c39452471..91d4a4d9258c 100644
--- a/arch/alpha/include/asm/cmpxchg.h
+++ b/arch/alpha/include/asm/cmpxchg.h
@@ -6,18 +6,18 @@
  * Atomic exchange routines.
  */
 
-#define ____xchg(type, args...)		__xchg ## type ## _local(args)
+#define ____xchg(type, args...)		__arch_xchg ## type ## _local(args)
 #define ____cmpxchg(type, args...)	__cmpxchg ## type ## _local(args)
 #include <asm/xchg.h>
 
 #define xchg_local(ptr, x)						\
 ({									\
 	__typeof__(*(ptr)) _x_ = (x);					\
-	(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_,	\
-				       sizeof(*(ptr)));			\
+	(__typeof__(*(ptr))) __arch_xchg_local((ptr), (unsigned long)_x_,\
+					       sizeof(*(ptr)));		\
 })
 
-#define cmpxchg_local(ptr, o, n)					\
+#define arch_cmpxchg_local(ptr, o, n)					\
 ({									\
 	__typeof__(*(ptr)) _o_ = (o);					\
 	__typeof__(*(ptr)) _n_ = (n);					\
@@ -26,7 +26,7 @@
 					  sizeof(*(ptr)));		\
 })
 
-#define cmpxchg64_local(ptr, o, n)					\
+#define arch_cmpxchg64_local(ptr, o, n)					\
 ({									\
 	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
 	cmpxchg_local((ptr), (o), (n));					\
@@ -34,7 +34,7 @@
 
 #undef ____xchg
 #undef ____cmpxchg
-#define ____xchg(type, args...)		__xchg ##type(args)
+#define ____xchg(type, args...)		__arch_xchg ##type(args)
 #define ____cmpxchg(type, args...)	__cmpxchg ##type(args)
 #include <asm/xchg.h>
 
@@ -42,18 +42,18 @@
  * The leading and the trailing memory barriers guarantee that these
  * operations are fully ordered.
  */
-#define xchg(ptr, x)							\
+#define arch_xchg(ptr, x)						\
 ({									\
 	__typeof__(*(ptr)) __ret;					\
 	__typeof__(*(ptr)) _x_ = (x);					\
 	smp_mb();							\
 	__ret = (__typeof__(*(ptr)))					\
-		__xchg((ptr), (unsigned long)_x_, sizeof(*(ptr)));	\
+		__arch_xchg((ptr), (unsigned long)_x_, sizeof(*(ptr)));	\
 	smp_mb();							\
 	__ret;								\
 })
 
-#define cmpxchg(ptr, o, n)						\
+#define arch_cmpxchg(ptr, o, n)						\
 ({									\
 	__typeof__(*(ptr)) __ret;					\
 	__typeof__(*(ptr)) _o_ = (o);					\
@@ -65,10 +65,10 @@
 	__ret;								\
 })
 
-#define cmpxchg64(ptr, o, n)						\
+#define arch_cmpxchg64(ptr, o, n)					\
 ({									\
 	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg((ptr), (o), (n));					\
+	arch_cmpxchg((ptr), (o), (n));					\
 })
 
 #undef ____cmpxchg
diff --git a/arch/alpha/include/asm/compiler.h b/arch/alpha/include/asm/compiler.h
index 5159ba259d65..ae645959018a 100644
--- a/arch/alpha/include/asm/compiler.h
+++ b/arch/alpha/include/asm/compiler.h
@@ -4,15 +4,4 @@
 
 #include <uapi/asm/compiler.h>
 
-/* Some idiots over in <linux/compiler.h> thought inline should imply
-   always_inline.  This breaks stuff.  We'll include this file whenever
-   we run into such problems.  */
-
-#include <linux/compiler.h>
-#undef inline
-#undef __inline__
-#undef __inline
-#undef __always_inline
-#define __always_inline		inline __attribute__((always_inline))
-
 #endif /* __ALPHA_COMPILER_H */
diff --git a/arch/alpha/include/asm/core_apecs.h b/arch/alpha/include/asm/core_apecs.h
index 2d9726fc02ef..69a2fc62c9c3 100644
--- a/arch/alpha/include/asm/core_apecs.h
+++ b/arch/alpha/include/asm/core_apecs.h
@@ -384,7 +384,7 @@ struct el_apecs_procdata
 		}						\
 	} while (0)
 
-__EXTERN_INLINE unsigned int apecs_ioread8(const void __iomem *xaddr)
+__EXTERN_INLINE u8 apecs_ioread8(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	unsigned long result, base_and_type;
@@ -420,7 +420,7 @@ __EXTERN_INLINE void apecs_iowrite8(u8 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + base_and_type) = w;
 }
 
-__EXTERN_INLINE unsigned int apecs_ioread16(const void __iomem *xaddr)
+__EXTERN_INLINE u16 apecs_ioread16(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	unsigned long result, base_and_type;
@@ -456,7 +456,7 @@ __EXTERN_INLINE void apecs_iowrite16(u16 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + base_and_type) = w;
 }
 
-__EXTERN_INLINE unsigned int apecs_ioread32(const void __iomem *xaddr)
+__EXTERN_INLINE u32 apecs_ioread32(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	if (addr < APECS_DENSE_MEM)
@@ -472,6 +472,22 @@ __EXTERN_INLINE void apecs_iowrite32(u32 b, void __iomem *xaddr)
 	*(vuip)addr = b;
 }
 
+__EXTERN_INLINE u64 apecs_ioread64(const void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < APECS_DENSE_MEM)
+		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
+	return *(vulp)addr;
+}
+
+__EXTERN_INLINE void apecs_iowrite64(u64 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < APECS_DENSE_MEM)
+		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
+	*(vulp)addr = b;
+}
+
 __EXTERN_INLINE void __iomem *apecs_ioportmap(unsigned long addr)
 {
 	return (void __iomem *)(addr + APECS_IO);
diff --git a/arch/alpha/include/asm/core_cia.h b/arch/alpha/include/asm/core_cia.h
index cb22991f6761..d26bdfb7ca3b 100644
--- a/arch/alpha/include/asm/core_cia.h
+++ b/arch/alpha/include/asm/core_cia.h
@@ -342,7 +342,7 @@ struct el_CIA_sysdata_mcheck {
 #define vuip	volatile unsigned int __force *
 #define vulp	volatile unsigned long __force *
 
-__EXTERN_INLINE unsigned int cia_ioread8(const void __iomem *xaddr)
+__EXTERN_INLINE u8 cia_ioread8(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	unsigned long result, base_and_type;
@@ -374,7 +374,7 @@ __EXTERN_INLINE void cia_iowrite8(u8 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + base_and_type) = w;
 }
 
-__EXTERN_INLINE unsigned int cia_ioread16(const void __iomem *xaddr)
+__EXTERN_INLINE u16 cia_ioread16(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	unsigned long result, base_and_type;
@@ -404,7 +404,7 @@ __EXTERN_INLINE void cia_iowrite16(u16 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + base_and_type) = w;
 }
 
-__EXTERN_INLINE unsigned int cia_ioread32(const void __iomem *xaddr)
+__EXTERN_INLINE u32 cia_ioread32(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	if (addr < CIA_DENSE_MEM)
@@ -420,6 +420,22 @@ __EXTERN_INLINE void cia_iowrite32(u32 b, void __iomem *xaddr)
 	*(vuip)addr = b;
 }
 
+__EXTERN_INLINE u64 cia_ioread64(const void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < CIA_DENSE_MEM)
+		addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18;
+	return *(vulp)addr;
+}
+
+__EXTERN_INLINE void cia_iowrite64(u64 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < CIA_DENSE_MEM)
+		addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18;
+	*(vulp)addr = b;
+}
+
 __EXTERN_INLINE void __iomem *cia_ioportmap(unsigned long addr)
 {
 	return (void __iomem *)(addr + CIA_IO);
diff --git a/arch/alpha/include/asm/core_lca.h b/arch/alpha/include/asm/core_lca.h
index ec86314418cb..d8c3e72ef8f6 100644
--- a/arch/alpha/include/asm/core_lca.h
+++ b/arch/alpha/include/asm/core_lca.h
@@ -230,7 +230,7 @@ union el_lca {
 	} while (0)
 
 
-__EXTERN_INLINE unsigned int lca_ioread8(const void __iomem *xaddr)
+__EXTERN_INLINE u8 lca_ioread8(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	unsigned long result, base_and_type;
@@ -266,7 +266,7 @@ __EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + base_and_type) = w;
 }
 
-__EXTERN_INLINE unsigned int lca_ioread16(const void __iomem *xaddr)
+__EXTERN_INLINE u16 lca_ioread16(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	unsigned long result, base_and_type;
@@ -302,7 +302,7 @@ __EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + base_and_type) = w;
 }
 
-__EXTERN_INLINE unsigned int lca_ioread32(const void __iomem *xaddr)
+__EXTERN_INLINE u32 lca_ioread32(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	if (addr < LCA_DENSE_MEM)
@@ -318,6 +318,22 @@ __EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr)
 	*(vuip)addr = b;
 }
 
+__EXTERN_INLINE u64 lca_ioread64(const void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < LCA_DENSE_MEM)
+		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
+	return *(vulp)addr;
+}
+
+__EXTERN_INLINE void lca_iowrite64(u64 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < LCA_DENSE_MEM)
+		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
+	*(vulp)addr = b;
+}
+
 __EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr)
 {
 	return (void __iomem *)(addr + LCA_IO);
diff --git a/arch/alpha/include/asm/core_marvel.h b/arch/alpha/include/asm/core_marvel.h
index b266e02e284b..d99f3a82e0e5 100644
--- a/arch/alpha/include/asm/core_marvel.h
+++ b/arch/alpha/include/asm/core_marvel.h
@@ -332,10 +332,10 @@ struct io7 {
 #define vucp	volatile unsigned char __force *
 #define vusp	volatile unsigned short __force *
 
-extern unsigned int marvel_ioread8(const void __iomem *);
+extern u8 marvel_ioread8(const void __iomem *);
 extern void marvel_iowrite8(u8 b, void __iomem *);
 
-__EXTERN_INLINE unsigned int marvel_ioread16(const void __iomem *addr)
+__EXTERN_INLINE u16 marvel_ioread16(const void __iomem *addr)
 {
 	return __kernel_ldwu(*(vusp)addr);
 }
diff --git a/arch/alpha/include/asm/core_mcpcia.h b/arch/alpha/include/asm/core_mcpcia.h
index cb24d1bd6141..ed2bf8ad40ed 100644
--- a/arch/alpha/include/asm/core_mcpcia.h
+++ b/arch/alpha/include/asm/core_mcpcia.h
@@ -248,6 +248,7 @@ struct el_MCPCIA_uncorrected_frame_mcheck {
 
 #define vip	volatile int __force *
 #define vuip	volatile unsigned int __force *
+#define vulp	volatile unsigned long __force *
 
 #ifndef MCPCIA_ONE_HAE_WINDOW
 #define MCPCIA_FROB_MMIO						\
@@ -267,7 +268,7 @@ extern inline int __mcpcia_is_mmio(unsigned long addr)
 	return (addr & 0x80000000UL) == 0;
 }
 
-__EXTERN_INLINE unsigned int mcpcia_ioread8(const void __iomem *xaddr)
+__EXTERN_INLINE u8 mcpcia_ioread8(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
 	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
@@ -291,7 +292,7 @@ __EXTERN_INLINE void mcpcia_iowrite8(u8 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + hose + 0x00) = w;
 }
 
-__EXTERN_INLINE unsigned int mcpcia_ioread16(const void __iomem *xaddr)
+__EXTERN_INLINE u16 mcpcia_ioread16(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
 	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
@@ -315,7 +316,7 @@ __EXTERN_INLINE void mcpcia_iowrite16(u16 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + hose + 0x08) = w;
 }
 
-__EXTERN_INLINE unsigned int mcpcia_ioread32(const void __iomem *xaddr)
+__EXTERN_INLINE u32 mcpcia_ioread32(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long)xaddr;
 
@@ -335,6 +336,26 @@ __EXTERN_INLINE void mcpcia_iowrite32(u32 b, void __iomem *xaddr)
 	*(vuip)addr = b;
 }
 
+__EXTERN_INLINE u64 mcpcia_ioread64(const void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+
+	if (!__mcpcia_is_mmio(addr))
+		addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
+
+	return *(vulp)addr;
+}
+
+__EXTERN_INLINE void mcpcia_iowrite64(u64 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+
+	if (!__mcpcia_is_mmio(addr))
+		addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
+
+	*(vulp)addr = b;
+}
+
 
 __EXTERN_INLINE void __iomem *mcpcia_ioportmap(unsigned long addr)
 {
@@ -362,6 +383,7 @@ __EXTERN_INLINE int mcpcia_is_mmio(const volatile void __iomem *xaddr)
 
 #undef vip
 #undef vuip
+#undef vulp
 
 #undef __IO_PREFIX
 #define __IO_PREFIX		mcpcia
diff --git a/arch/alpha/include/asm/core_t2.h b/arch/alpha/include/asm/core_t2.h
index 12bb7addc789..ab956b1625b5 100644
--- a/arch/alpha/include/asm/core_t2.h
+++ b/arch/alpha/include/asm/core_t2.h
@@ -360,6 +360,7 @@ struct el_t2_frame_corrected {
 
 #define vip	volatile int *
 #define vuip	volatile unsigned int *
+#define vulp	volatile unsigned long *
 
 extern inline u8 t2_inb(unsigned long addr)
 {
@@ -402,6 +403,17 @@ extern inline void t2_outl(u32 b, unsigned long addr)
 	mb();
 }
 
+extern inline u64 t2_inq(unsigned long addr)
+{
+	return *(vulp) ((addr << 5) + T2_IO + 0x18);
+}
+
+extern inline void t2_outq(u64 b, unsigned long addr)
+{
+	*(vulp) ((addr << 5) + T2_IO + 0x18) = b;
+	mb();
+}
+
 
 /*
  * Memory functions.
@@ -572,7 +584,7 @@ __EXTERN_INLINE int t2_is_mmio(const volatile void __iomem *addr)
    it doesn't make sense to merge the pio and mmio routines.  */
 
 #define IOPORT(OS, NS)							\
-__EXTERN_INLINE unsigned int t2_ioread##NS(const void __iomem *xaddr)		\
+__EXTERN_INLINE u##NS t2_ioread##NS(const void __iomem *xaddr)		\
 {									\
 	if (t2_is_mmio(xaddr))						\
 		return t2_read##OS(xaddr);				\
@@ -590,11 +602,13 @@ __EXTERN_INLINE void t2_iowrite##NS(u##NS b, void __iomem *xaddr)	\
 IOPORT(b, 8)
 IOPORT(w, 16)
 IOPORT(l, 32)
+IOPORT(q, 64)
 
 #undef IOPORT
 
 #undef vip
 #undef vuip
+#undef vulp
 
 #undef __IO_PREFIX
 #define __IO_PREFIX		t2
diff --git a/arch/alpha/include/asm/div64.h b/arch/alpha/include/asm/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/arch/alpha/include/asm/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h
index 0ee6a5c99b16..6ce7e2041685 100644
--- a/arch/alpha/include/asm/dma-mapping.h
+++ b/arch/alpha/include/asm/dma-mapping.h
@@ -4,7 +4,7 @@
 
 extern const struct dma_map_ops alpha_pci_ops;
 
-static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
+static inline const struct dma_map_ops *get_arch_dma_ops(void)
 {
 #ifdef CONFIG_ALPHA_JENSEN
 	return NULL;
diff --git a/arch/alpha/include/asm/dma.h b/arch/alpha/include/asm/dma.h
index 28610ea7786d..a04d76b96089 100644
--- a/arch/alpha/include/asm/dma.h
+++ b/arch/alpha/include/asm/dma.h
@@ -365,13 +365,4 @@ extern void free_dma(unsigned int dmanr);	/* release it again */
 #define KERNEL_HAVE_CHECK_DMA
 extern int check_dma(unsigned int dmanr);
 
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy 	(0)
-#endif
-
-
 #endif /* _ASM_DMA_H */
diff --git a/arch/alpha/include/asm/elf.h b/arch/alpha/include/asm/elf.h
index 8049997fa372..e6da23f1da83 100644
--- a/arch/alpha/include/asm/elf.h
+++ b/arch/alpha/include/asm/elf.h
@@ -120,12 +120,6 @@ extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task);
 #define ELF_CORE_COPY_TASK_REGS(TASK, DEST) \
 	dump_elf_task(*(DEST), TASK)
 
-/* Similar, but for the FP registers.  */
-
-extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task);
-#define ELF_CORE_COPY_FPREGS(TASK, DEST) \
-	dump_elf_task_fp(*(DEST), TASK)
-
 /* This yields a mask that user programs can use to figure out what
    instruction set this CPU supports.  This is trivial on Alpha, 
    but not so on other machines. */
diff --git a/arch/alpha/include/asm/floppy.h b/arch/alpha/include/asm/floppy.h
index 8dfdb3aa1d96..64b42d9591fc 100644
--- a/arch/alpha/include/asm/floppy.h
+++ b/arch/alpha/include/asm/floppy.h
@@ -20,7 +20,7 @@
 #define fd_free_dma()           free_dma(FLOPPY_DMA)
 #define fd_clear_dma_ff()       clear_dma_ff(FLOPPY_DMA)
 #define fd_set_dma_mode(mode)   set_dma_mode(FLOPPY_DMA,mode)
-#define fd_set_dma_addr(addr)   set_dma_addr(FLOPPY_DMA,virt_to_bus(addr))
+#define fd_set_dma_addr(addr)   set_dma_addr(FLOPPY_DMA,isa_virt_to_bus(addr))
 #define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA,count)
 #define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
 #define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
@@ -43,17 +43,18 @@ alpha_fd_dma_setup(char *addr, unsigned long size, int mode, int io)
 	static int prev_dir;
 	int dir;
 
-	dir = (mode != DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
+	dir = (mode != DMA_MODE_READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
 
 	if (bus_addr 
 	    && (addr != prev_addr || size != prev_size || dir != prev_dir)) {
 		/* different from last time -- unmap prev */
-		pci_unmap_single(isa_bridge, bus_addr, prev_size, prev_dir);
+		dma_unmap_single(&isa_bridge->dev, bus_addr, prev_size,
+				 prev_dir);
 		bus_addr = 0;
 	}
 
 	if (!bus_addr)	/* need to map it */
-		bus_addr = pci_map_single(isa_bridge, addr, size, dir);
+		bus_addr = dma_map_single(&isa_bridge->dev, addr, size, dir);
 
 	/* remember this one as prev */
 	prev_addr = addr;
diff --git a/arch/alpha/include/asm/fpu.h b/arch/alpha/include/asm/fpu.h
index b9691405e56b..30b24135dd7a 100644
--- a/arch/alpha/include/asm/fpu.h
+++ b/arch/alpha/include/asm/fpu.h
@@ -15,21 +15,27 @@ rdfpcr(void)
 {
 	unsigned long tmp, ret;
 
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		ret = current_thread_info()->fp[31];
+	} else {
 #if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
-	__asm__ __volatile__ (
-		"ftoit $f0,%0\n\t"
-		"mf_fpcr $f0\n\t"
-		"ftoit $f0,%1\n\t"
-		"itoft %0,$f0"
-		: "=r"(tmp), "=r"(ret));
+		__asm__ __volatile__ (
+			"ftoit $f0,%0\n\t"
+			"mf_fpcr $f0\n\t"
+			"ftoit $f0,%1\n\t"
+			"itoft %0,$f0"
+			: "=r"(tmp), "=r"(ret));
 #else
-	__asm__ __volatile__ (
-		"stt $f0,%0\n\t"
-		"mf_fpcr $f0\n\t"
-		"stt $f0,%1\n\t"
-		"ldt $f0,%0"
-		: "=m"(tmp), "=m"(ret));
+		__asm__ __volatile__ (
+			"stt $f0,%0\n\t"
+			"mf_fpcr $f0\n\t"
+			"stt $f0,%1\n\t"
+			"ldt $f0,%0"
+			: "=m"(tmp), "=m"(ret));
 #endif
+	}
+	preempt_enable();
 
 	return ret;
 }
@@ -39,21 +45,28 @@ wrfpcr(unsigned long val)
 {
 	unsigned long tmp;
 
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		current_thread_info()->status |= TS_RESTORE_FP;
+		current_thread_info()->fp[31] = val;
+	} else {
 #if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
-	__asm__ __volatile__ (
-		"ftoit $f0,%0\n\t"
-		"itoft %1,$f0\n\t"
-		"mt_fpcr $f0\n\t"
-		"itoft %0,$f0"
-		: "=&r"(tmp) : "r"(val));
+		__asm__ __volatile__ (
+			"ftoit $f0,%0\n\t"
+			"itoft %1,$f0\n\t"
+			"mt_fpcr $f0\n\t"
+			"itoft %0,$f0"
+			: "=&r"(tmp) : "r"(val));
 #else
-	__asm__ __volatile__ (
-		"stt $f0,%0\n\t"
-		"ldt $f0,%1\n\t"
-		"mt_fpcr $f0\n\t"
-		"ldt $f0,%0"
-		: "=m"(tmp) : "m"(val));
+		__asm__ __volatile__ (
+			"stt $f0,%0\n\t"
+			"ldt $f0,%1\n\t"
+			"mt_fpcr $f0\n\t"
+			"ldt $f0,%0"
+			: "=m"(tmp) : "m"(val));
 #endif
+	}
+	preempt_enable();
 }
 
 static inline unsigned long
diff --git a/arch/alpha/include/asm/hwrpb.h b/arch/alpha/include/asm/hwrpb.h
index d8180e527a1e..fc76f36265ad 100644
--- a/arch/alpha/include/asm/hwrpb.h
+++ b/arch/alpha/include/asm/hwrpb.h
@@ -152,7 +152,7 @@ struct memdesc_struct {
 	unsigned long chksum;
 	unsigned long optional_pa;
 	unsigned long numclusters;
-	struct memclust_struct cluster[0];
+	struct memclust_struct cluster[];
 };
 
 struct dsr_struct {
diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h
index 1f6a909d1fa5..7aeaf7c30a6f 100644
--- a/arch/alpha/include/asm/io.h
+++ b/arch/alpha/include/asm/io.h
@@ -14,10 +14,6 @@
    the implementation we have here matches that interface.  */
 #include <asm-generic/iomap.h>
 
-/* We don't use IO slowdowns on the Alpha, but.. */
-#define __SLOW_DOWN_IO	do { } while (0)
-#define SLOW_DOWN_IO	do { } while (0)
-
 /*
  * Virtual -> physical identity mapping starts at this offset
  */
@@ -60,7 +56,7 @@ extern inline void set_hae(unsigned long new_hae)
  * Change virtual addresses to physical addresses and vv.
  */
 #ifdef USE_48_BIT_KSEG
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
 	return (unsigned long)address - IDENT_ADDR;
 }
@@ -70,7 +66,7 @@ static inline void * phys_to_virt(unsigned long address)
 	return (void *) (address + IDENT_ADDR);
 }
 #else
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
         unsigned long phys = (unsigned long)address;
 
@@ -90,6 +86,8 @@ static inline void * phys_to_virt(unsigned long address)
 }
 #endif
 
+#define virt_to_phys		virt_to_phys
+#define phys_to_virt		phys_to_virt
 #define page_to_phys(page)	page_to_pa(page)
 
 /* Maximum PIO space address supported?  */
@@ -106,15 +104,15 @@ static inline void * phys_to_virt(unsigned long address)
 extern unsigned long __direct_map_base;
 extern unsigned long __direct_map_size;
 
-static inline unsigned long __deprecated virt_to_bus(void *address)
+static inline unsigned long __deprecated isa_virt_to_bus(volatile void *address)
 {
 	unsigned long phys = virt_to_phys(address);
 	unsigned long bus = phys + __direct_map_base;
 	return phys <= __direct_map_size ? bus : 0;
 }
-#define isa_virt_to_bus virt_to_bus
+#define isa_virt_to_bus isa_virt_to_bus
 
-static inline void * __deprecated bus_to_virt(unsigned long address)
+static inline void * __deprecated isa_bus_to_virt(unsigned long address)
 {
 	void *virt;
 
@@ -125,7 +123,7 @@ static inline void * __deprecated bus_to_virt(unsigned long address)
 	virt = phys_to_virt(address);
 	return (long)address <= 0 ? NULL : virt;
 }
-#define isa_bus_to_virt bus_to_virt
+#define isa_bus_to_virt isa_bus_to_virt
 
 /*
  * There are different chipsets to interface the Alpha CPUs to the world.
@@ -153,6 +151,7 @@ static inline void generic_##NAME(TYPE b, QUAL void __iomem *addr)	\
 REMAP1(unsigned int, ioread8, const)
 REMAP1(unsigned int, ioread16, const)
 REMAP1(unsigned int, ioread32, const)
+REMAP1(u64, ioread64, const)
 REMAP1(u8, readb, const volatile)
 REMAP1(u16, readw, const volatile)
 REMAP1(u32, readl, const volatile)
@@ -161,6 +160,7 @@ REMAP1(u64, readq, const volatile)
 REMAP2(u8, iowrite8, /**/)
 REMAP2(u16, iowrite16, /**/)
 REMAP2(u32, iowrite32, /**/)
+REMAP2(u64, iowrite64, /**/)
 REMAP2(u8, writeb, volatile)
 REMAP2(u16, writew, volatile)
 REMAP2(u32, writel, volatile)
@@ -242,6 +242,12 @@ extern u32		inl(unsigned long port);
 extern void		outb(u8 b, unsigned long port);
 extern void		outw(u16 b, unsigned long port);
 extern void		outl(u32 b, unsigned long port);
+#define inb inb
+#define inw inw
+#define inl inl
+#define outb outb
+#define outw outw
+#define outl outl
 
 extern u8		readb(const volatile void __iomem *addr);
 extern u16		readw(const volatile void __iomem *addr);
@@ -251,6 +257,14 @@ extern void		writeb(u8 b, volatile void __iomem *addr);
 extern void		writew(u16 b, volatile void __iomem *addr);
 extern void		writel(u32 b, volatile void __iomem *addr);
 extern void		writeq(u64 b, volatile void __iomem *addr);
+#define readb readb
+#define readw readw
+#define readl readl
+#define readq readq
+#define writeb writeb
+#define writew writew
+#define writel writel
+#define writeq writeq
 
 extern u8		__raw_readb(const volatile void __iomem *addr);
 extern u16		__raw_readw(const volatile void __iomem *addr);
@@ -260,6 +274,14 @@ extern void		__raw_writeb(u8 b, volatile void __iomem *addr);
 extern void		__raw_writew(u16 b, volatile void __iomem *addr);
 extern void		__raw_writel(u32 b, volatile void __iomem *addr);
 extern void		__raw_writeq(u64 b, volatile void __iomem *addr);
+#define __raw_readb __raw_readb
+#define __raw_readw __raw_readw
+#define __raw_readl __raw_readl
+#define __raw_readq __raw_readq
+#define __raw_writeb __raw_writeb
+#define __raw_writew __raw_writew
+#define __raw_writel __raw_writel
+#define __raw_writeq __raw_writeq
 
 /*
  * Mapping from port numbers to __iomem space is pretty easy.
@@ -277,6 +299,9 @@ extern inline void ioport_unmap(void __iomem *addr)
 {
 }
 
+#define ioport_map ioport_map
+#define ioport_unmap ioport_unmap
+
 static inline void __iomem *ioremap(unsigned long port, unsigned long size)
 {
 	return IO_CONCAT(__IO_PREFIX,ioremap) (port, size);
@@ -358,6 +383,11 @@ extern inline void outw(u16 b, unsigned long port)
 }
 #endif
 
+#define ioread8 ioread8
+#define ioread16 ioread16
+#define iowrite8 iowrite8
+#define iowrite16 iowrite16
+
 #if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
 extern inline unsigned int ioread32(const void __iomem *addr)
 {
@@ -368,12 +398,27 @@ extern inline unsigned int ioread32(const void __iomem *addr)
 	return ret;
 }
 
+extern inline u64 ioread64(const void __iomem *addr)
+{
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread64)(addr);
+	mb();
+	return ret;
+}
+
 extern inline void iowrite32(u32 b, void __iomem *addr)
 {
 	mb();
 	IO_CONCAT(__IO_PREFIX, iowrite32)(b, addr);
 }
 
+extern inline void iowrite64(u64 b, void __iomem *addr)
+{
+	mb();
+	IO_CONCAT(__IO_PREFIX, iowrite64)(b, addr);
+}
+
 extern inline u32 inl(unsigned long port)
 {
 	return ioread32(ioport_map(port, 4));
@@ -385,6 +430,11 @@ extern inline void outl(u32 b, unsigned long port)
 }
 #endif
 
+#define ioread32 ioread32
+#define ioread64 ioread64
+#define iowrite32 iowrite32
+#define iowrite64 iowrite64
+
 #if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1
 extern inline u8 __raw_readb(const volatile void __iomem *addr)
 {
@@ -505,6 +555,10 @@ extern u8 readb_relaxed(const volatile void __iomem *addr);
 extern u16 readw_relaxed(const volatile void __iomem *addr);
 extern u32 readl_relaxed(const volatile void __iomem *addr);
 extern u64 readq_relaxed(const volatile void __iomem *addr);
+#define readb_relaxed readb_relaxed
+#define readw_relaxed readw_relaxed
+#define readl_relaxed readl_relaxed
+#define readq_relaxed readq_relaxed
 
 #if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
 extern inline u8 readb_relaxed(const volatile void __iomem *addr)
@@ -557,6 +611,10 @@ static inline void memsetw_io(volatile void __iomem *addr, u16 c, long len)
 	_memset_c_io(addr, 0x0001000100010001UL * c, len);
 }
 
+#define memset_io memset_io
+#define memcpy_fromio memcpy_fromio
+#define memcpy_toio memcpy_toio
+
 /*
  * String versions of in/out ops:
  */
@@ -567,6 +625,13 @@ extern void outsb (unsigned long port, const void *src, unsigned long count);
 extern void outsw (unsigned long port, const void *src, unsigned long count);
 extern void outsl (unsigned long port, const void *src, unsigned long count);
 
+#define insb insb
+#define insw insw
+#define insl insl
+#define outsb outsb
+#define outsw outsw
+#define outsl outsl
+
 /*
  * The Alpha Jensen hardware for some rather strange reason puts
  * the RTC clock at 0x170 instead of 0x70. Probably due to some
@@ -587,25 +652,28 @@ extern void outsl (unsigned long port, const void *src, unsigned long count);
 #define RTC_ALWAYS_BCD	0
 
 /*
- * Some mucking forons use if[n]def writeq to check if platform has it.
- * It's a bloody bad idea and we probably want ARCH_HAS_WRITEQ for them
- * to play with; for now just use cpp anti-recursion logics and make sure
- * that damn thing is defined and expands to itself.
- */
-
-#define writeq writeq
-#define readq readq
-
-/*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
  * access
  */
 #define xlate_dev_mem_ptr(p)	__va(p)
 
 /*
- * Convert a virtual cached pointer to an uncached pointer
+ * These get provided from <asm-generic/iomap.h> since alpha does not
+ * select GENERIC_IOMAP.
  */
-#define xlate_dev_kmem_ptr(p)	p
+#define ioread64 ioread64
+#define iowrite64 iowrite64
+#define ioread64be ioread64be
+#define iowrite64be iowrite64be
+#define ioread8_rep ioread8_rep
+#define ioread16_rep ioread16_rep
+#define ioread32_rep ioread32_rep
+#define iowrite8_rep iowrite8_rep
+#define iowrite16_rep iowrite16_rep
+#define iowrite32_rep iowrite32_rep
+#define pci_iounmap pci_iounmap
+
+#include <asm-generic/io.h>
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/alpha/include/asm/io_trivial.h b/arch/alpha/include/asm/io_trivial.h
index a1a29cbe02fa..00032093bcfc 100644
--- a/arch/alpha/include/asm/io_trivial.h
+++ b/arch/alpha/include/asm/io_trivial.h
@@ -6,13 +6,13 @@
 /* This file may be included multiple times.  */
 
 #if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
-__EXTERN_INLINE unsigned int
+__EXTERN_INLINE u8
 IO_CONCAT(__IO_PREFIX,ioread8)(const void __iomem *a)
 {
 	return __kernel_ldbu(*(const volatile u8 __force *)a);
 }
 
-__EXTERN_INLINE unsigned int
+__EXTERN_INLINE u16
 IO_CONCAT(__IO_PREFIX,ioread16)(const void __iomem *a)
 {
 	return __kernel_ldwu(*(const volatile u16 __force *)a);
@@ -32,7 +32,7 @@ IO_CONCAT(__IO_PREFIX,iowrite16)(u16 b, void __iomem *a)
 #endif
 
 #if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
-__EXTERN_INLINE unsigned int
+__EXTERN_INLINE u32
 IO_CONCAT(__IO_PREFIX,ioread32)(const void __iomem *a)
 {
 	return *(const volatile u32 __force *)a;
@@ -43,6 +43,18 @@ IO_CONCAT(__IO_PREFIX,iowrite32)(u32 b, void __iomem *a)
 {
 	*(volatile u32 __force *)a = b;
 }
+
+__EXTERN_INLINE u64
+IO_CONCAT(__IO_PREFIX,ioread64)(const void __iomem *a)
+{
+	return *(const volatile u64 __force *)a;
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,iowrite64)(u64 b, void __iomem *a)
+{
+	*(volatile u64 __force *)a = b;
+}
 #endif
 
 #if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1
diff --git a/arch/alpha/include/asm/irq_regs.h b/arch/alpha/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/arch/alpha/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/arch/alpha/include/asm/jensen.h b/arch/alpha/include/asm/jensen.h
index 916895155a88..66eb049eb421 100644
--- a/arch/alpha/include/asm/jensen.h
+++ b/arch/alpha/include/asm/jensen.h
@@ -98,6 +98,7 @@ __EXTERN_INLINE void jensen_set_hae(unsigned long addr)
 }
 
 #define vuip	volatile unsigned int *
+#define vulp	volatile unsigned long *
 
 /*
  * IO functions
@@ -111,18 +112,18 @@ __EXTERN_INLINE void jensen_set_hae(unsigned long addr)
  * convinced that I need one of the newer machines.
  */
 
-static inline unsigned int jensen_local_inb(unsigned long addr)
+__EXTERN_INLINE unsigned int jensen_local_inb(unsigned long addr)
 {
 	return 0xff & *(vuip)((addr << 9) + EISA_VL82C106);
 }
 
-static inline void jensen_local_outb(u8 b, unsigned long addr)
+__EXTERN_INLINE void jensen_local_outb(u8 b, unsigned long addr)
 {
 	*(vuip)((addr << 9) + EISA_VL82C106) = b;
 	mb();
 }
 
-static inline unsigned int jensen_bus_inb(unsigned long addr)
+__EXTERN_INLINE unsigned int jensen_bus_inb(unsigned long addr)
 {
 	long result;
 
@@ -131,7 +132,7 @@ static inline unsigned int jensen_bus_inb(unsigned long addr)
 	return __kernel_extbl(result, addr & 3);
 }
 
-static inline void jensen_bus_outb(u8 b, unsigned long addr)
+__EXTERN_INLINE void jensen_bus_outb(u8 b, unsigned long addr)
 {
 	jensen_set_hae(0);
 	*(vuip)((addr << 7) + EISA_IO + 0x00) = b * 0x01010101;
@@ -183,6 +184,12 @@ __EXTERN_INLINE u32 jensen_inl(unsigned long addr)
 	return *(vuip) ((addr << 7) + EISA_IO + 0x60);
 }
 
+__EXTERN_INLINE u64 jensen_inq(unsigned long addr)
+{
+	jensen_set_hae(0);
+	return *(vulp) ((addr << 7) + EISA_IO + 0x60);
+}
+
 __EXTERN_INLINE void jensen_outw(u16 b, unsigned long addr)
 {
 	jensen_set_hae(0);
@@ -197,6 +204,13 @@ __EXTERN_INLINE void jensen_outl(u32 b, unsigned long addr)
 	mb();
 }
 
+__EXTERN_INLINE void jensen_outq(u64 b, unsigned long addr)
+{
+	jensen_set_hae(0);
+	*(vulp) ((addr << 7) + EISA_IO + 0x60) = b;
+	mb();
+}
+
 /*
  * Memory functions.
  */
@@ -305,7 +319,7 @@ __EXTERN_INLINE int jensen_is_mmio(const volatile void __iomem *addr)
    that it doesn't make sense to merge them.  */
 
 #define IOPORT(OS, NS)							\
-__EXTERN_INLINE unsigned int jensen_ioread##NS(const void __iomem *xaddr)	\
+__EXTERN_INLINE u##NS jensen_ioread##NS(const void __iomem *xaddr)	\
 {									\
 	if (jensen_is_mmio(xaddr))					\
 		return jensen_read##OS(xaddr - 0x100000000ul);		\
@@ -323,10 +337,12 @@ __EXTERN_INLINE void jensen_iowrite##NS(u##NS b, void __iomem *xaddr)	\
 IOPORT(b, 8)
 IOPORT(w, 16)
 IOPORT(l, 32)
+IOPORT(q, 64)
 
 #undef IOPORT
 
 #undef vuip
+#undef vulp
 
 #undef __IO_PREFIX
 #define __IO_PREFIX		jensen
diff --git a/arch/alpha/include/asm/kdebug.h b/arch/alpha/include/asm/kdebug.h
deleted file mode 100644
index 6ece1b037665..000000000000
--- a/arch/alpha/include/asm/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/arch/alpha/include/asm/local.h b/arch/alpha/include/asm/local.h
index fab26a1c93d5..0fcaad642cc3 100644
--- a/arch/alpha/include/asm/local.h
+++ b/arch/alpha/include/asm/local.h
@@ -52,8 +52,16 @@ static __inline__ long local_sub_return(long i, local_t * l)
 	return result;
 }
 
-#define local_cmpxchg(l, o, n) \
-	(cmpxchg_local(&((l)->a.counter), (o), (n)))
+static __inline__ long local_cmpxchg(local_t *l, long old, long new)
+{
+	return cmpxchg_local(&l->a.counter, old, new);
+}
+
+static __inline__ bool local_try_cmpxchg(local_t *l, long *old, long new)
+{
+	return try_cmpxchg_local(&l->a.counter, (s64 *)old, new);
+}
+
 #define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n)))
 
 /**
diff --git a/arch/alpha/include/asm/machvec.h b/arch/alpha/include/asm/machvec.h
index a4e96e2bec74..8623f995d34c 100644
--- a/arch/alpha/include/asm/machvec.h
+++ b/arch/alpha/include/asm/machvec.h
@@ -46,13 +46,15 @@ struct alpha_machine_vector
 	void (*mv_pci_tbi)(struct pci_controller *hose,
 			   dma_addr_t start, dma_addr_t end);
 
-	unsigned int (*mv_ioread8)(const void __iomem *);
-	unsigned int (*mv_ioread16)(const void __iomem *);
-	unsigned int (*mv_ioread32)(const void __iomem *);
+	u8 (*mv_ioread8)(const void __iomem *);
+	u16 (*mv_ioread16)(const void __iomem *);
+	u32 (*mv_ioread32)(const void __iomem *);
+	u64 (*mv_ioread64)(const void __iomem *);
 
 	void (*mv_iowrite8)(u8, void __iomem *);
 	void (*mv_iowrite16)(u16, void __iomem *);
 	void (*mv_iowrite32)(u32, void __iomem *);
+	void (*mv_iowrite64)(u64, void __iomem *);
 
 	u8 (*mv_readb)(const volatile void __iomem *);
 	u16 (*mv_readw)(const volatile void __iomem *);
@@ -99,12 +101,6 @@ struct alpha_machine_vector
 
 	const char *vector_name;
 
-	/* NUMA information */
-	int (*pa_to_nid)(unsigned long);
-	int (*cpuid_to_nid)(int);
-	unsigned long (*node_mem_start)(int);
-	unsigned long (*node_mem_size)(int);
-
 	/* System specific parameters.  */
 	union {
 	    struct {
diff --git a/arch/alpha/include/asm/mmzone.h b/arch/alpha/include/asm/mmzone.h
deleted file mode 100644
index 86644604d977..000000000000
--- a/arch/alpha/include/asm/mmzone.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99
- * Adapted for the alpha wildfire architecture Jan 2001.
- */
-#ifndef _ASM_MMZONE_H_
-#define _ASM_MMZONE_H_
-
-#ifdef CONFIG_DISCONTIGMEM
-
-#include <asm/smp.h>
-
-/*
- * Following are macros that are specific to this numa platform.
- */
-
-extern pg_data_t node_data[];
-
-#define alpha_pa_to_nid(pa)		\
-        (alpha_mv.pa_to_nid 		\
-	 ? alpha_mv.pa_to_nid(pa)	\
-	 : (0))
-#define node_mem_start(nid)		\
-        (alpha_mv.node_mem_start 	\
-	 ? alpha_mv.node_mem_start(nid) \
-	 : (0UL))
-#define node_mem_size(nid)		\
-        (alpha_mv.node_mem_size 	\
-	 ? alpha_mv.node_mem_size(nid) 	\
-	 : ((nid) ? (0UL) : (~0UL)))
-
-#define pa_to_nid(pa)		alpha_pa_to_nid(pa)
-#define NODE_DATA(nid)		(&node_data[(nid)])
-
-#define node_localnr(pfn, nid)	((pfn) - NODE_DATA(nid)->node_start_pfn)
-
-#if 1
-#define PLAT_NODE_DATA_LOCALNR(p, n)	\
-	(((p) >> PAGE_SHIFT) - PLAT_NODE_DATA(n)->gendata.node_start_pfn)
-#else
-static inline unsigned long
-PLAT_NODE_DATA_LOCALNR(unsigned long p, int n)
-{
-	unsigned long temp;
-	temp = p >> PAGE_SHIFT;
-	return temp - PLAT_NODE_DATA(n)->gendata.node_start_pfn;
-}
-#endif
-
-/*
- * Following are macros that each numa implementation must define.
- */
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define kvaddr_to_nid(kaddr)	pa_to_nid(__pa(kaddr))
-
-/*
- * Given a kaddr, LOCAL_BASE_ADDR finds the owning node of the memory
- * and returns the kaddr corresponding to first physical page in the
- * node's mem_map.
- */
-#define LOCAL_BASE_ADDR(kaddr)						  \
-    ((unsigned long)__va(NODE_DATA(kvaddr_to_nid(kaddr))->node_start_pfn  \
-			 << PAGE_SHIFT))
-
-/* XXX: FIXME -- nyc */
-#define kern_addr_valid(kaddr)	(0)
-
-#define mk_pte(page, pgprot)						     \
-({								 	     \
-	pte_t pte;                                                           \
-	unsigned long pfn;                                                   \
-									     \
-	pfn = page_to_pfn(page) << 32; \
-	pte_val(pte) = pfn | pgprot_val(pgprot);			     \
-									     \
-	pte;								     \
-})
-
-#define pte_page(x)							\
-({									\
-       	unsigned long kvirt;						\
-	struct page * __xx;						\
-									\
-	kvirt = (unsigned long)__va(pte_val(x) >> (32-PAGE_SHIFT));	\
-	__xx = virt_to_page(kvirt);					\
-									\
-	__xx;                                                           \
-})
-
-#define pfn_to_nid(pfn)		pa_to_nid(((u64)(pfn) << PAGE_SHIFT))
-#define pfn_valid(pfn)							\
-	(((pfn) - node_start_pfn(pfn_to_nid(pfn))) <			\
-	 node_spanned_pages(pfn_to_nid(pfn)))					\
-
-#endif /* CONFIG_DISCONTIGMEM */
-
-#endif /* _ASM_MMZONE_H_ */
diff --git a/arch/alpha/include/asm/page.h b/arch/alpha/include/asm/page.h
index 268f99b4602b..4db1ebc0ed99 100644
--- a/arch/alpha/include/asm/page.h
+++ b/arch/alpha/include/asm/page.h
@@ -17,9 +17,8 @@
 extern void clear_page(void *page);
 #define clear_user_page(page, vaddr, pg)	clear_page(page)
 
-#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
-	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vmaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+#define vma_alloc_zeroed_movable_folio(vma, vaddr) \
+	vma_alloc_folio(GFP_HIGHUSER_MOVABLE | __GFP_ZERO, 0, vma, vaddr, false)
 
 extern void copy_page(void * _to, void * _from);
 #define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
@@ -87,10 +86,6 @@ typedef struct page *pgtable_t;
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	pfn_valid((__pa(kaddr) >> PAGE_SHIFT))
 
-#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn)		((pfn) < max_mapnr)
-#endif /* CONFIG_FLATMEM */
-
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
 
diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h
index cf6bc1e64d66..6312656279d7 100644
--- a/arch/alpha/include/asm/pci.h
+++ b/arch/alpha/include/asm/pci.h
@@ -56,12 +56,6 @@ struct pci_controller {
 
 /* IOMMU controls.  */
 
-/* TODO: integrate with include/asm-generic/pci.h ? */
-static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
-{
-	return channel ? 15 : 14;
-}
-
 #define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
 
 static inline int pci_proc_domain(struct pci_bus *bus)
diff --git a/arch/alpha/include/asm/pgalloc.h b/arch/alpha/include/asm/pgalloc.h
index 9c6a24fe493d..68be7adbfe58 100644
--- a/arch/alpha/include/asm/pgalloc.h
+++ b/arch/alpha/include/asm/pgalloc.h
@@ -18,7 +18,6 @@ pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte)
 {
 	pmd_set(pmd, (pte_t *)(page_to_pa(pte) + PAGE_OFFSET));
 }
-#define pmd_pgtable(pmd) pmd_page(pmd)
 
 static inline void
 pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h
index 8d856c62e22a..ba43cb841d19 100644
--- a/arch/alpha/include/asm/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
@@ -46,7 +46,6 @@ struct vm_area_struct;
 #define PTRS_PER_PMD	(1UL << (PAGE_SHIFT-3))
 #define PTRS_PER_PGD	(1UL << (PAGE_SHIFT-3))
 #define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
-#define FIRST_USER_ADDRESS	0UL
 
 /* Number of pointers that fit on a page:  this will go away. */
 #define PTRS_PER_PAGE	(1UL << (PAGE_SHIFT-3))
@@ -75,6 +74,9 @@ struct vm_area_struct;
 #define _PAGE_DIRTY	0x20000
 #define _PAGE_ACCESSED	0x40000
 
+/* We borrow bit 39 to store the exclusive marker in swap PTEs. */
+#define _PAGE_SWP_EXCLUSIVE	0x8000000000UL
+
 /*
  * NOTE! The "accessed" bit isn't necessarily exact:  it can be kept exactly
  * by software (use the KRE/URE/KWE/UWE bits appropriately), but I'll fake it.
@@ -117,23 +119,6 @@ struct vm_area_struct;
  * arch/alpha/mm/fault.c)
  */
 	/* xwr */
-#define __P000	_PAGE_P(_PAGE_FOE | _PAGE_FOW | _PAGE_FOR)
-#define __P001	_PAGE_P(_PAGE_FOE | _PAGE_FOW)
-#define __P010	_PAGE_P(_PAGE_FOE)
-#define __P011	_PAGE_P(_PAGE_FOE)
-#define __P100	_PAGE_P(_PAGE_FOW | _PAGE_FOR)
-#define __P101	_PAGE_P(_PAGE_FOW)
-#define __P110	_PAGE_P(0)
-#define __P111	_PAGE_P(0)
-
-#define __S000	_PAGE_S(_PAGE_FOE | _PAGE_FOW | _PAGE_FOR)
-#define __S001	_PAGE_S(_PAGE_FOE | _PAGE_FOW)
-#define __S010	_PAGE_S(_PAGE_FOE)
-#define __S011	_PAGE_S(_PAGE_FOE)
-#define __S100	_PAGE_S(_PAGE_FOW | _PAGE_FOR)
-#define __S101	_PAGE_S(_PAGE_FOW)
-#define __S110	_PAGE_S(0)
-#define __S111	_PAGE_S(0)
 
 /*
  * pgprot_noncached() is only for infiniband pci support, and a real
@@ -206,7 +191,6 @@ extern unsigned long __zero_page(void);
 #define page_to_pa(page)	(page_to_pfn(page) << PAGE_SHIFT)
 #define pte_pfn(pte)	(pte_val(pte) >> 32)
 
-#ifndef CONFIG_DISCONTIGMEM
 #define pte_page(pte)	pfn_to_page(pte_pfn(pte))
 #define mk_pte(page, pgprot)						\
 ({									\
@@ -215,7 +199,6 @@ extern unsigned long __zero_page(void);
 	pte_val(pte) = (page_to_pfn(page) << 32) | pgprot_val(pgprot);	\
 	pte;								\
 })
-#endif
 
 extern inline pte_t pfn_pte(unsigned long physpfn, pgprot_t pgprot)
 { pte_t pte; pte_val(pte) = (PHYS_TWIDDLE(physpfn) << 32) | pgprot_val(pgprot); return pte; }
@@ -236,11 +219,14 @@ pmd_page_vaddr(pmd_t pmd)
 	return ((pmd_val(pmd) & _PFN_MASK) >> (32-PAGE_SHIFT)) + PAGE_OFFSET;
 }
 
+#define pmd_pfn(pmd)	(pmd_val(pmd) >> 32)
 #define pmd_page(pmd)	(pfn_to_page(pmd_val(pmd) >> 32))
 #define pud_page(pud)	(pfn_to_page(pud_val(pud) >> 32))
 
-extern inline unsigned long pud_page_vaddr(pud_t pgd)
-{ return PAGE_OFFSET + ((pud_val(pgd) & _PFN_MASK) >> (32-PAGE_SHIFT)); }
+extern inline pmd_t *pud_pgtable(pud_t pgd)
+{
+	return (pmd_t *)(PAGE_OFFSET + ((pud_val(pgd) & _PFN_MASK) >> (32-PAGE_SHIFT)));
+}
 
 extern inline int pte_none(pte_t pte)		{ return !pte_val(pte); }
 extern inline int pte_present(pte_t pte)	{ return pte_val(pte) & _PAGE_VALID; }
@@ -290,7 +276,7 @@ extern inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= __ACCESS_BITS; retu
 /* Find an entry in the second-level page table.. */
 extern inline pmd_t * pmd_offset(pud_t * dir, unsigned long address)
 {
-	pmd_t *ret = (pmd_t *) pud_page_vaddr(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1));
+	pmd_t *ret = pud_pgtable(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1));
 	smp_rmb(); /* see above */
 	return ret;
 }
@@ -318,21 +304,46 @@ extern inline void update_mmu_cache(struct vm_area_struct * vma,
 }
 
 /*
- * Non-present pages:  high 24 bits are offset, next 8 bits type,
- * low 32 bits zero.
+ * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that
+ * are !pte_none() && !pte_present().
+ *
+ * Format of swap PTEs:
+ *
+ *   6 6 6 6 5 5 5 5 5 5 5 5 5 5 4 4 4 4 4 4 4 4 4 4 3 3 3 3 3 3 3 3
+ *   3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2
+ *   <------------------- offset ------------------> E <--- type -->
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <--------------------------- zeroes -------------------------->
+ *
+ *   E is the exclusive marker that is not stored in swap entries.
  */
 extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
-{ pte_t pte; pte_val(pte) = (type << 32) | (offset << 40); return pte; }
+{ pte_t pte; pte_val(pte) = ((type & 0x7f) << 32) | (offset << 40); return pte; }
 
-#define __swp_type(x)		(((x).val >> 32) & 0xff)
+#define __swp_type(x)		(((x).val >> 32) & 0x7f)
 #define __swp_offset(x)		((x).val >> 40)
 #define __swp_entry(type, off)	((swp_entry_t) { pte_val(mk_swap_pte((type), (off))) })
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
-#ifndef CONFIG_DISCONTIGMEM
-#define kern_addr_valid(addr)	(1)
-#endif
+static inline int pte_swp_exclusive(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
+}
+
+static inline pte_t pte_swp_mkexclusive(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_SWP_EXCLUSIVE;
+	return pte;
+}
+
+static inline pte_t pte_swp_clear_exclusive(pte_t pte)
+{
+	pte_val(pte) &= ~_PAGE_SWP_EXCLUSIVE;
+	return pte;
+}
 
 #define pte_ERROR(e) \
 	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
diff --git a/arch/alpha/include/asm/processor.h b/arch/alpha/include/asm/processor.h
index 6100431da07a..714abe494e5f 100644
--- a/arch/alpha/include/asm/processor.h
+++ b/arch/alpha/include/asm/processor.h
@@ -26,10 +26,6 @@
 #define TASK_UNMAPPED_BASE \
   ((current->personality & ADDR_LIMIT_32BIT) ? 0x40000000 : TASK_SIZE / 2)
 
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
 /* This is dead.  Everything has been moved to thread_info.  */
 struct thread_struct { };
 #define INIT_THREAD  { }
@@ -40,9 +36,7 @@ extern void start_thread(struct pt_regs *, unsigned long, unsigned long);
 
 /* Free all resources held by a thread. */
 struct task_struct;
-extern void release_thread(struct task_struct *);
-
-unsigned long get_wchan(struct task_struct *p);
+unsigned long __get_wchan(struct task_struct *p);
 
 #define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc)
 
diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h
index df5f317ab3fc..3557ce64ed21 100644
--- a/arch/alpha/include/asm/ptrace.h
+++ b/arch/alpha/include/asm/ptrace.h
@@ -16,7 +16,6 @@
 
 #define current_pt_regs() \
   ((struct pt_regs *) ((char *)current_thread_info() + 2*PAGE_SIZE) - 1)
-#define signal_pt_regs current_pt_regs
 
 #define force_successful_syscall_return() (current_pt_regs()->r0 = 0)
 
diff --git a/arch/alpha/include/asm/setup.h b/arch/alpha/include/asm/setup.h
new file mode 100644
index 000000000000..262aab99e391
--- /dev/null
+++ b/arch/alpha/include/asm/setup.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __ALPHA_SETUP_H
+#define __ALPHA_SETUP_H
+
+#include <uapi/asm/setup.h>
+
+/*
+ * We leave one page for the initial stack page, and one page for
+ * the initial process structure. Also, the console eats 3 MB for
+ * the initial bootloader (one of which we can reclaim later).
+ */
+#define BOOT_PCB	0x20000000
+#define BOOT_ADDR	0x20000000
+/* Remove when official MILO sources have ELF support: */
+#define BOOT_SIZE	(16*1024)
+
+#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
+#define KERNEL_START_PHYS	0x300000 /* Old bootloaders hardcoded this.  */
+#else
+#define KERNEL_START_PHYS	0x1000000 /* required: Wildfire/Titan/Marvel */
+#endif
+
+#define KERNEL_START	(PAGE_OFFSET+KERNEL_START_PHYS)
+#define SWAPPER_PGD	KERNEL_START
+#define INIT_STACK	(PAGE_OFFSET+KERNEL_START_PHYS+0x02000)
+#define EMPTY_PGT	(PAGE_OFFSET+KERNEL_START_PHYS+0x04000)
+#define EMPTY_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x08000)
+#define ZERO_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x0A000)
+
+#define START_ADDR	(PAGE_OFFSET+KERNEL_START_PHYS+0x10000)
+
+/*
+ * This is setup by the secondary bootstrap loader.  Because
+ * the zero page is zeroed out as soon as the vm system is
+ * initialized, we need to copy things out into a more permanent
+ * place.
+ */
+#define PARAM			ZERO_PGE
+#define COMMAND_LINE		((char *)(absolute_pointer(PARAM + 0x0000)))
+#define INITRD_START		(*(unsigned long *) (PARAM+0x100))
+#define INITRD_SIZE		(*(unsigned long *) (PARAM+0x108))
+
+#endif
diff --git a/arch/alpha/include/asm/spinlock_types.h b/arch/alpha/include/asm/spinlock_types.h
index 1d5716bc060b..2526fd3be5fd 100644
--- a/arch/alpha/include/asm/spinlock_types.h
+++ b/arch/alpha/include/asm/spinlock_types.h
@@ -2,7 +2,7 @@
 #ifndef _ALPHA_SPINLOCK_TYPES_H
 #define _ALPHA_SPINLOCK_TYPES_H
 
-#ifndef __LINUX_SPINLOCK_TYPES_H
+#ifndef __LINUX_SPINLOCK_TYPES_RAW_H
 # error "please don't include this file directly"
 #endif
 
diff --git a/arch/alpha/include/asm/syscall.h b/arch/alpha/include/asm/syscall.h
index 11c688c1d7ec..f21babaeed85 100644
--- a/arch/alpha/include/asm/syscall.h
+++ b/arch/alpha/include/asm/syscall.h
@@ -9,4 +9,10 @@ static inline int syscall_get_arch(struct task_struct *task)
 	return AUDIT_ARCH_ALPHA;
 }
 
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->r0;
+}
+
 #endif	/* _ASM_ALPHA_SYSCALL_H */
diff --git a/arch/alpha/include/asm/termios.h b/arch/alpha/include/asm/termios.h
deleted file mode 100644
index b7c77bb1bfd2..000000000000
--- a/arch/alpha/include/asm/termios.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ALPHA_TERMIOS_H
-#define _ALPHA_TERMIOS_H
-
-#include <uapi/asm/termios.h>
-
-/*	eof=^D		eol=\0		eol2=\0		erase=del
-	werase=^W	kill=^U		reprint=^R	sxtc=\0
-	intr=^C		quit=^\		susp=^Z		<OSF/1 VDSUSP>
-	start=^Q	stop=^S		lnext=^V	discard=^U
-	vmin=\1		vtime=\0
-*/
-#define INIT_C_CC "\004\000\000\177\027\025\022\000\003\034\032\000\021\023\026\025\001\000"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-
-#define user_termio_to_kernel_termios(a_termios, u_termio)			\
-({										\
-	struct ktermios *k_termios = (a_termios);				\
-	struct termio k_termio;							\
-	int canon, ret;								\
-										\
-	ret = copy_from_user(&k_termio, u_termio, sizeof(k_termio));		\
-	if (!ret) {								\
-		/* Overwrite only the low bits.  */				\
-		*(unsigned short *)&k_termios->c_iflag = k_termio.c_iflag;	\
-		*(unsigned short *)&k_termios->c_oflag = k_termio.c_oflag;	\
-		*(unsigned short *)&k_termios->c_cflag = k_termio.c_cflag;	\
-		*(unsigned short *)&k_termios->c_lflag = k_termio.c_lflag;	\
-		canon = k_termio.c_lflag & ICANON;				\
-										\
-		k_termios->c_cc[VINTR]  = k_termio.c_cc[_VINTR];		\
-		k_termios->c_cc[VQUIT]  = k_termio.c_cc[_VQUIT];		\
-		k_termios->c_cc[VERASE] = k_termio.c_cc[_VERASE];		\
-		k_termios->c_cc[VKILL]  = k_termio.c_cc[_VKILL];		\
-		k_termios->c_cc[VEOL2]  = k_termio.c_cc[_VEOL2];		\
-		k_termios->c_cc[VSWTC]  = k_termio.c_cc[_VSWTC];		\
-		k_termios->c_cc[canon ? VEOF : VMIN]  = k_termio.c_cc[_VEOF];	\
-		k_termios->c_cc[canon ? VEOL : VTIME] = k_termio.c_cc[_VEOL];	\
-	}									\
-	ret;									\
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- *
- * Note the "fun" _VMIN overloading.
- */
-#define kernel_termios_to_user_termio(u_termio, a_termios)		\
-({									\
-	struct ktermios *k_termios = (a_termios);			\
-	struct termio k_termio;						\
-	int canon;							\
-									\
-	k_termio.c_iflag = k_termios->c_iflag;				\
-	k_termio.c_oflag = k_termios->c_oflag;				\
-	k_termio.c_cflag = k_termios->c_cflag;				\
-	canon = (k_termio.c_lflag = k_termios->c_lflag) & ICANON;	\
-									\
-	k_termio.c_line = k_termios->c_line;				\
-	k_termio.c_cc[_VINTR]  = k_termios->c_cc[VINTR];		\
-	k_termio.c_cc[_VQUIT]  = k_termios->c_cc[VQUIT];		\
-	k_termio.c_cc[_VERASE] = k_termios->c_cc[VERASE];		\
-	k_termio.c_cc[_VKILL]  = k_termios->c_cc[VKILL];		\
-	k_termio.c_cc[_VEOF]   = k_termios->c_cc[canon ? VEOF : VMIN];	\
-	k_termio.c_cc[_VEOL]   = k_termios->c_cc[canon ? VEOL : VTIME];	\
-	k_termio.c_cc[_VEOL2]  = k_termios->c_cc[VEOL2];		\
-	k_termio.c_cc[_VSWTC]  = k_termios->c_cc[VSWTC];		\
-									\
-	copy_to_user(u_termio, &k_termio, sizeof(k_termio));		\
-})
-
-#define user_termios_to_kernel_termios(k, u) \
-	copy_from_user(k, u, sizeof(struct termios2))
-
-#define kernel_termios_to_user_termios(u, k) \
-	copy_to_user(u, k, sizeof(struct termios2))
-
-#define user_termios_to_kernel_termios_1(k, u) \
-	copy_from_user(k, u, sizeof(struct termios))
-
-#define kernel_termios_to_user_termios_1(u, k) \
-	copy_to_user(u, k, sizeof(struct termios))
-
-#endif	/* _ALPHA_TERMIOS_H */
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index 2592356e3215..4a4d00b37986 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -19,7 +19,6 @@ struct thread_info {
 	unsigned int		flags;		/* low level flags */
 	unsigned int		ieee_state;	/* see fpu.h */
 
-	mm_segment_t		addr_limit;	/* thread address space */
 	unsigned		cpu;		/* current CPU */
 	int			preempt_count; /* 0 => preemptable, <0 => BUG */
 	unsigned int		status;		/* thread-synchronous flags */
@@ -27,6 +26,7 @@ struct thread_info {
 	int bpt_nsaved;
 	unsigned long bpt_addr[2];		/* breakpoint handling  */
 	unsigned int bpt_insn[2];
+	unsigned long fp[32];
 };
 
 /*
@@ -35,7 +35,6 @@ struct thread_info {
 #define INIT_THREAD_INFO(tsk)			\
 {						\
 	.task		= &tsk,			\
-	.addr_limit	= KERNEL_DS,		\
 	.preempt_count	= INIT_PREEMPT_COUNT,	\
 }
 
@@ -43,6 +42,8 @@ struct thread_info {
 register struct thread_info *__current_thread_info __asm__("$8");
 #define current_thread_info()  __current_thread_info
 
+register unsigned long *current_stack_pointer __asm__ ("$30");
+
 #endif /* __ASSEMBLY__ */
 
 /* Thread information allocation.  */
@@ -77,16 +78,15 @@ register struct thread_info *__current_thread_info __asm__("$8");
 
 /* Work to do on interrupt/exception return.  */
 #define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
-				 _TIF_NOTIFY_RESUME)
-
-/* Work to do on any return to userspace.  */
-#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
-				 | _TIF_SYSCALL_TRACE)
+				 _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL)
 
 #define TS_UAC_NOPRINT		0x0001	/* ! Preserve the following three */
 #define TS_UAC_NOFIX		0x0002	/* ! flags as they match          */
 #define TS_UAC_SIGBUS		0x0004	/* ! userspace part of 'osf_sysinfo' */
 
+#define TS_SAVED_FP		0x0008
+#define TS_RESTORE_FP		0x0010
+
 #define SET_UNALIGN_CTL(task,value)	({				\
 	__u32 status = task_thread_info(task)->status & ~UAC_BITMASK;	\
 	if (value & PR_UNALIGN_NOPRINT)					\
@@ -110,5 +110,17 @@ register struct thread_info *__current_thread_info __asm__("$8");
 	put_user(res, (int __user *)(value));				\
 	})
 
+#ifndef __ASSEMBLY__
+extern void __save_fpu(void);
+
+static inline void save_fpu(void)
+{
+	if (!(current_thread_info()->status & TS_SAVED_FP)) {
+		current_thread_info()->status |= TS_SAVED_FP;
+		__save_fpu();
+	}
+}
+#endif
+
 #endif /* __KERNEL__ */
 #endif /* _ALPHA_THREAD_INFO_H */
diff --git a/arch/alpha/include/asm/timex.h b/arch/alpha/include/asm/timex.h
index b565cc6f408e..f89798da8a14 100644
--- a/arch/alpha/include/asm/timex.h
+++ b/arch/alpha/include/asm/timex.h
@@ -28,5 +28,6 @@ static inline cycles_t get_cycles (void)
 	__asm__ __volatile__ ("rpcc %0" : "=r"(ret));
 	return ret;
 }
+#define get_cycles get_cycles
 
 #endif
diff --git a/arch/alpha/include/asm/topology.h b/arch/alpha/include/asm/topology.h
index 5a77a40567fa..7d393036aa8f 100644
--- a/arch/alpha/include/asm/topology.h
+++ b/arch/alpha/include/asm/topology.h
@@ -7,45 +7,6 @@
 #include <linux/numa.h>
 #include <asm/machvec.h>
 
-#ifdef CONFIG_NUMA
-static inline int cpu_to_node(int cpu)
-{
-	int node;
-	
-	if (!alpha_mv.cpuid_to_nid)
-		return 0;
-
-	node = alpha_mv.cpuid_to_nid(cpu);
-
-#ifdef DEBUG_NUMA
-	BUG_ON(node < 0);
-#endif
-
-	return node;
-}
-
-extern struct cpumask node_to_cpumask_map[];
-/* FIXME: This is dumb, recalculating every time.  But simple. */
-static const struct cpumask *cpumask_of_node(int node)
-{
-	int cpu;
-
-	if (node == NUMA_NO_NODE)
-		return cpu_all_mask;
-
-	cpumask_clear(&node_to_cpumask_map[node]);
-
-	for_each_online_cpu(cpu) {
-		if (cpu_to_node(cpu) == node)
-			cpumask_set_cpu(cpu, node_to_cpumask_map[node]);
-	}
-
-	return &node_to_cpumask_map[node];
-}
-
-#define cpumask_of_pcibus(bus)	(cpu_online_mask)
-
-#endif /* !CONFIG_NUMA */
 # include <asm-generic/topology.h>
 
 #endif /* _ASM_ALPHA_TOPOLOGY_H */
diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h
index 1b6f25efa247..c32c2584c0b7 100644
--- a/arch/alpha/include/asm/uaccess.h
+++ b/arch/alpha/include/asm/uaccess.h
@@ -2,47 +2,7 @@
 #ifndef __ALPHA_UACCESS_H
 #define __ALPHA_UACCESS_H
 
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * Or at least it did once upon a time.  Nowadays it is a mask that
- * defines which bits of the address space are off limits.  This is a
- * wee bit faster than the above.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define KERNEL_DS	((mm_segment_t) { 0UL })
-#define USER_DS		((mm_segment_t) { -0x40000000000UL })
-
-#define get_fs()  (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-#define uaccess_kernel()	(get_fs().seg == KERNEL_DS.seg)
-
-/*
- * Is a address valid? This does a straightforward calculation rather
- * than tests.
- *
- * Address valid if:
- *  - "addr" doesn't have any high-bits set
- *  - AND "size" doesn't have any high-bits set
- *  - AND "addr+size-(size != 0)" doesn't have any high-bits set
- *  - OR we are in kernel mode.
- */
-#define __access_ok(addr, size) ({				\
-	unsigned long __ao_a = (addr), __ao_b = (size);		\
-	unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b;	\
-	(get_fs().seg & (__ao_a | __ao_b | __ao_end)) == 0; })
-
-#define access_ok(addr, size)				\
-({							\
-	__chk_user_ptr(addr);				\
-	__access_ok(((unsigned long)(addr)), (size));	\
-})
-
+#include <asm-generic/access_ok.h>
 /*
  * These are the main single-value transfer routines.  They automatically
  * use the right size if we just have the right pointer type.
@@ -105,7 +65,7 @@ extern void __get_user_unknown(void);
 	long __gu_err = -EFAULT;				\
 	unsigned long __gu_val = 0;				\
 	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
-	if (__access_ok((unsigned long)__gu_addr, size)) {	\
+	if (__access_ok(__gu_addr, size)) {			\
 		__gu_err = 0;					\
 		switch (size) {					\
 		  case 1: __get_user_8(__gu_addr); break;	\
@@ -200,7 +160,7 @@ extern void __put_user_unknown(void);
 ({								\
 	long __pu_err = -EFAULT;				\
 	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
-	if (__access_ok((unsigned long)__pu_addr, size)) {	\
+	if (__access_ok(__pu_addr, size)) {			\
 		__pu_err = 0;					\
 		switch (size) {					\
 		  case 1: __put_user_8(x, __pu_addr); break;	\
@@ -316,17 +276,14 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long len)
 
 extern long __clear_user(void __user *to, long len);
 
-extern inline long
+static inline long
 clear_user(void __user *to, long len)
 {
-	if (__access_ok((unsigned long)to, len))
+	if (__access_ok(to, len))
 		len = __clear_user(to, len);
 	return len;
 }
 
-#define user_addr_max() \
-        (uaccess_kernel() ? ~0UL : TASK_SIZE)
-
 extern long strncpy_from_user(char *dest, const char __user *src, long count);
 extern __must_check long strnlen_user(const char __user *str, long n);
 
diff --git a/arch/alpha/include/asm/unaligned.h b/arch/alpha/include/asm/unaligned.h
deleted file mode 100644
index 863c807b66f8..000000000000
--- a/arch/alpha/include/asm/unaligned.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_ALPHA_UNALIGNED_H
-#define _ASM_ALPHA_UNALIGNED_H
-
-#include <linux/unaligned/le_struct.h>
-#include <linux/unaligned/be_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned __get_unaligned_le
-#define put_unaligned __put_unaligned_le
-
-#endif /* _ASM_ALPHA_UNALIGNED_H */
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index 986f5da9b7d8..caabd92ea709 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -4,7 +4,7 @@
 
 #include <uapi/asm/unistd.h>
 
-#define NR_SYSCALLS	__NR_syscalls
+#define NR_syscalls	__NR_syscalls
 
 #define __ARCH_WANT_NEW_STAT
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/alpha/include/asm/user.h b/arch/alpha/include/asm/user.h
index 3df37492c7b7..c9f525a6aab8 100644
--- a/arch/alpha/include/asm/user.h
+++ b/arch/alpha/include/asm/user.h
@@ -45,10 +45,4 @@ struct user {
 	char		u_comm[32];		/* user command name */
 };
 
-#define NBPG			PAGE_SIZE
-#define UPAGES			1
-#define HOST_TEXT_START_ADDR	(u.start_code)
-#define HOST_DATA_START_ADDR	(u.start_data)
-#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
-
 #endif /* _ALPHA_USER_H */
diff --git a/arch/alpha/include/asm/xor.h b/arch/alpha/include/asm/xor.h
index 5aeb4fb3cb7c..e0de0c233ab9 100644
--- a/arch/alpha/include/asm/xor.h
+++ b/arch/alpha/include/asm/xor.h
@@ -5,24 +5,43 @@
  * Optimized RAID-5 checksumming functions for alpha EV5 and EV6
  */
 
-extern void xor_alpha_2(unsigned long, unsigned long *, unsigned long *);
-extern void xor_alpha_3(unsigned long, unsigned long *, unsigned long *,
-		        unsigned long *);
-extern void xor_alpha_4(unsigned long, unsigned long *, unsigned long *,
-		        unsigned long *, unsigned long *);
-extern void xor_alpha_5(unsigned long, unsigned long *, unsigned long *,
-		        unsigned long *, unsigned long *, unsigned long *);
+extern void
+xor_alpha_2(unsigned long bytes, unsigned long * __restrict p1,
+	    const unsigned long * __restrict p2);
+extern void
+xor_alpha_3(unsigned long bytes, unsigned long * __restrict p1,
+	    const unsigned long * __restrict p2,
+	    const unsigned long * __restrict p3);
+extern void
+xor_alpha_4(unsigned long bytes, unsigned long * __restrict p1,
+	    const unsigned long * __restrict p2,
+	    const unsigned long * __restrict p3,
+	    const unsigned long * __restrict p4);
+extern void
+xor_alpha_5(unsigned long bytes, unsigned long * __restrict p1,
+	    const unsigned long * __restrict p2,
+	    const unsigned long * __restrict p3,
+	    const unsigned long * __restrict p4,
+	    const unsigned long * __restrict p5);
 
-extern void xor_alpha_prefetch_2(unsigned long, unsigned long *,
-				 unsigned long *);
-extern void xor_alpha_prefetch_3(unsigned long, unsigned long *,
-				 unsigned long *, unsigned long *);
-extern void xor_alpha_prefetch_4(unsigned long, unsigned long *,
-				 unsigned long *, unsigned long *,
-				 unsigned long *);
-extern void xor_alpha_prefetch_5(unsigned long, unsigned long *,
-				 unsigned long *, unsigned long *,
-				 unsigned long *, unsigned long *);
+extern void
+xor_alpha_prefetch_2(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2);
+extern void
+xor_alpha_prefetch_3(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3);
+extern void
+xor_alpha_prefetch_4(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3,
+		     const unsigned long * __restrict p4);
+extern void
+xor_alpha_prefetch_5(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3,
+		     const unsigned long * __restrict p4,
+		     const unsigned long * __restrict p5);
 
 asm("								\n\
 	.text							\n\
diff --git a/arch/alpha/include/uapi/asm/mman.h b/arch/alpha/include/uapi/asm/mman.h
index a18ec7f63888..763929e814e9 100644
--- a/arch/alpha/include/uapi/asm/mman.h
+++ b/arch/alpha/include/uapi/asm/mman.h
@@ -71,6 +71,13 @@
 #define MADV_COLD	20		/* deactivate these pages */
 #define MADV_PAGEOUT	21		/* reclaim these pages */
 
+#define MADV_POPULATE_READ	22	/* populate (prefault) page tables readable */
+#define MADV_POPULATE_WRITE	23	/* populate (prefault) page tables writable */
+
+#define MADV_DONTNEED_LOCKED	24	/* like DONTNEED, but drop locked pages too */
+
+#define MADV_COLLAPSE	25		/* Synchronous hugepage collapse */
+
 /* compatibility flags */
 #define MAP_FILE	0
 
diff --git a/arch/alpha/include/uapi/asm/ptrace.h b/arch/alpha/include/uapi/asm/ptrace.h
index c29194181025..5ca45934fcbb 100644
--- a/arch/alpha/include/uapi/asm/ptrace.h
+++ b/arch/alpha/include/uapi/asm/ptrace.h
@@ -64,7 +64,9 @@ struct switch_stack {
 	unsigned long r14;
 	unsigned long r15;
 	unsigned long r26;
+#ifndef __KERNEL__
 	unsigned long fp[32];	/* fp[31] is fpcr */
+#endif
 };
 
 
diff --git a/arch/alpha/include/uapi/asm/setup.h b/arch/alpha/include/uapi/asm/setup.h
index 13b7ee465b0e..f881ea5947cb 100644
--- a/arch/alpha/include/uapi/asm/setup.h
+++ b/arch/alpha/include/uapi/asm/setup.h
@@ -1,43 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ALPHA_SETUP_H
-#define __ALPHA_SETUP_H
+#ifndef _UAPI__ALPHA_SETUP_H
+#define _UAPI__ALPHA_SETUP_H
 
 #define COMMAND_LINE_SIZE	256
 
-/*
- * We leave one page for the initial stack page, and one page for
- * the initial process structure. Also, the console eats 3 MB for
- * the initial bootloader (one of which we can reclaim later).
- */
-#define BOOT_PCB	0x20000000
-#define BOOT_ADDR	0x20000000
-/* Remove when official MILO sources have ELF support: */
-#define BOOT_SIZE	(16*1024)
-
-#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
-#define KERNEL_START_PHYS	0x300000 /* Old bootloaders hardcoded this.  */
-#else
-#define KERNEL_START_PHYS	0x1000000 /* required: Wildfire/Titan/Marvel */
-#endif
-
-#define KERNEL_START	(PAGE_OFFSET+KERNEL_START_PHYS)
-#define SWAPPER_PGD	KERNEL_START
-#define INIT_STACK	(PAGE_OFFSET+KERNEL_START_PHYS+0x02000)
-#define EMPTY_PGT	(PAGE_OFFSET+KERNEL_START_PHYS+0x04000)
-#define EMPTY_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x08000)
-#define ZERO_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x0A000)
-
-#define START_ADDR	(PAGE_OFFSET+KERNEL_START_PHYS+0x10000)
-
-/*
- * This is setup by the secondary bootstrap loader.  Because
- * the zero page is zeroed out as soon as the vm system is
- * initialized, we need to copy things out into a more permanent
- * place.
- */
-#define PARAM			ZERO_PGE
-#define COMMAND_LINE		((char*)(PARAM + 0x0000))
-#define INITRD_START		(*(unsigned long *) (PARAM+0x100))
-#define INITRD_SIZE		(*(unsigned long *) (PARAM+0x108))
-
-#endif
+#endif /* _UAPI__ALPHA_SETUP_H */
diff --git a/arch/alpha/include/uapi/asm/siginfo.h b/arch/alpha/include/uapi/asm/siginfo.h
index 6e1a2af2f962..e08eae88182b 100644
--- a/arch/alpha/include/uapi/asm/siginfo.h
+++ b/arch/alpha/include/uapi/asm/siginfo.h
@@ -2,8 +2,6 @@
 #ifndef _ALPHA_SIGINFO_H
 #define _ALPHA_SIGINFO_H
 
-#define __ARCH_SI_TRAPNO
-
 #include <asm-generic/siginfo.h>
 
 #endif
diff --git a/arch/alpha/include/uapi/asm/signal.h b/arch/alpha/include/uapi/asm/signal.h
index a69dd8d080a8..1413075f7616 100644
--- a/arch/alpha/include/uapi/asm/signal.h
+++ b/arch/alpha/include/uapi/asm/signal.h
@@ -100,7 +100,7 @@ struct sigaction {
 typedef struct sigaltstack {
 	void __user *ss_sp;
 	int ss_flags;
-	size_t ss_size;
+	__kernel_size_t ss_size;
 } stack_t;
 
 /* sigstack(2) is deprecated, and will be withdrawn in a future version
diff --git a/arch/alpha/include/uapi/asm/socket.h b/arch/alpha/include/uapi/asm/socket.h
index 57420356ce4c..739891b94136 100644
--- a/arch/alpha/include/uapi/asm/socket.h
+++ b/arch/alpha/include/uapi/asm/socket.h
@@ -127,6 +127,16 @@
 #define SO_PREFER_BUSY_POLL	69
 #define SO_BUSY_POLL_BUDGET	70
 
+#define SO_NETNS_COOKIE		71
+
+#define SO_BUF_LOCK		72
+
+#define SO_RESERVE_MEM		73
+
+#define SO_TXREHASH		74
+
+#define SO_RCVMARK		75
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64
diff --git a/arch/alpha/include/uapi/asm/termbits.h b/arch/alpha/include/uapi/asm/termbits.h
index 4575ba34a0ea..f1290b22072b 100644
--- a/arch/alpha/include/uapi/asm/termbits.h
+++ b/arch/alpha/include/uapi/asm/termbits.h
@@ -2,10 +2,8 @@
 #ifndef _ALPHA_TERMBITS_H
 #define _ALPHA_TERMBITS_H
 
-#include <linux/posix_types.h>
+#include <asm-generic/termbits-common.h>
 
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
 typedef unsigned int	tcflag_t;
 
 /*
@@ -53,76 +51,58 @@ struct ktermios {
 };
 
 /* c_cc characters */
-#define VEOF 0
-#define VEOL 1
-#define VEOL2 2
-#define VERASE 3
-#define VWERASE 4
-#define VKILL 5
-#define VREPRINT 6
-#define VSWTC 7
-#define VINTR 8
-#define VQUIT 9
-#define VSUSP 10
-#define VSTART 12
-#define VSTOP 13
-#define VLNEXT 14
-#define VDISCARD 15
-#define VMIN 16
-#define VTIME 17
+#define VEOF		 0
+#define VEOL		 1
+#define VEOL2		 2
+#define VERASE		 3
+#define VWERASE		 4
+#define VKILL		 5
+#define VREPRINT	 6
+#define VSWTC		 7
+#define VINTR		 8
+#define VQUIT		 9
+#define VSUSP		10
+#define VSTART		12
+#define VSTOP		13
+#define VLNEXT		14
+#define VDISCARD	15
+#define VMIN		16
+#define VTIME		17
 
 /* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IXON	0001000
-#define IXOFF	0002000
-#define IXANY	0004000
-#define IUCLC	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
+#define IXON	0x0200
+#define IXOFF	0x0400
+#define IUCLC	0x1000
+#define IMAXBEL	0x2000
+#define IUTF8	0x4000
 
 /* c_oflag bits */
-#define OPOST	0000001
-#define ONLCR	0000002
-#define OLCUC	0000004
-
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-
-#define OFILL	00000100
-#define OFDEL	00000200
-#define NLDLY	00001400
-#define   NL0	00000000
-#define   NL1	00000400
-#define   NL2	00001000
-#define   NL3	00001400
-#define TABDLY	00006000
-#define   TAB0	00000000
-#define   TAB1	00002000
-#define   TAB2	00004000
-#define   TAB3	00006000
-#define CRDLY	00030000
-#define   CR0	00000000
-#define   CR1	00010000
-#define   CR2	00020000
-#define   CR3	00030000
-#define FFDLY	00040000
-#define   FF0	00000000
-#define   FF1	00040000
-#define BSDLY	00100000
-#define   BS0	00000000
-#define   BS1	00100000
-#define VTDLY	00200000
-#define   VT0	00000000
-#define   VT1	00200000
+#define ONLCR	0x00002
+#define OLCUC	0x00004
+#define NLDLY	0x00300
+#define   NL0	0x00000
+#define   NL1	0x00100
+#define   NL2	0x00200
+#define   NL3	0x00300
+#define TABDLY	0x00c00
+#define   TAB0	0x00000
+#define   TAB1	0x00400
+#define   TAB2	0x00800
+#define   TAB3	0x00c00
+#define CRDLY	0x03000
+#define   CR0	0x00000
+#define   CR1	0x01000
+#define   CR2	0x02000
+#define   CR3	0x03000
+#define FFDLY	0x04000
+#define   FF0	0x00000
+#define   FF1	0x04000
+#define BSDLY	0x08000
+#define   BS0	0x00000
+#define   BS1	0x08000
+#define VTDLY	0x10000
+#define   VT0	0x00000
+#define   VT1	0x10000
 /*
  * Should be equivalent to TAB3, see description of TAB3 in
  * POSIX.1-2008, Ch. 11.2.3 "Output Modes"
@@ -130,61 +110,36 @@ struct ktermios {
 #define XTABS	TAB3
 
 /* c_cflag bit meaning */
-#define CBAUD	0000037
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CBAUDEX 0000000
-#define  B57600   00020
-#define  B115200  00021
-#define  B230400  00022
-#define  B460800  00023
-#define  B500000  00024
-#define  B576000  00025
-#define  B921600  00026
-#define B1000000  00027
-#define B1152000  00030
-#define B1500000  00031
-#define B2000000  00032
-#define B2500000  00033
-#define B3000000  00034
-#define B3500000  00035
-#define B4000000  00036
-#define BOTHER    00037
-
-#define CSIZE	00001400
-#define   CS5	00000000
-#define   CS6	00000400
-#define   CS7	00001000
-#define   CS8	00001400
-
-#define CSTOPB	00002000
-#define CREAD	00004000
-#define PARENB	00010000
-#define PARODD	00020000
-#define HUPCL	00040000
-
-#define CLOCAL	00100000
-#define CMSPAR	  010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-#define CIBAUD	07600000
-#define IBSHIFT	16
+#define CBAUD		0x0000001f
+#define CBAUDEX		0x00000000
+#define BOTHER		0x0000001f
+#define     B57600	0x00000010
+#define    B115200	0x00000011
+#define    B230400	0x00000012
+#define    B460800	0x00000013
+#define    B500000	0x00000014
+#define    B576000	0x00000015
+#define    B921600	0x00000016
+#define   B1000000	0x00000017
+#define   B1152000	0x00000018
+#define   B1500000	0x00000019
+#define   B2000000	0x0000001a
+#define   B2500000	0x0000001b
+#define   B3000000	0x0000001c
+#define   B3500000	0x0000001d
+#define   B4000000	0x0000001e
+#define CSIZE		0x00000300
+#define   CS5		0x00000000
+#define   CS6		0x00000100
+#define   CS7		0x00000200
+#define   CS8		0x00000300
+#define CSTOPB		0x00000400
+#define CREAD		0x00000800
+#define PARENB		0x00001000
+#define PARODD		0x00002000
+#define HUPCL		0x00004000
+#define CLOCAL		0x00008000
+#define CIBAUD		0x001f0000
 
 /* c_lflag bits */
 #define ISIG	0x00000080
@@ -204,17 +159,6 @@ struct ktermios {
 #define IEXTEN	0x00000400
 #define EXTPROC	0x10000000
 
-/* Values for the ACTION argument to `tcflow'.  */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* Values for the QUEUE_SELECTOR argument to `tcflush'.  */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
 /* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'.  */
 #define	TCSANOW		0
 #define	TCSADRAIN	1
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index 5a74581bf0ee..fb4efec7cbc7 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -3,13 +3,13 @@
 # Makefile for the linux kernel.
 #
 
-extra-y		:= head.o vmlinux.lds
+extra-y		:= vmlinux.lds
 asflags-y	:= $(KBUILD_CFLAGS)
 ccflags-y	:= -Wno-sign-compare
 
-obj-y    := entry.o traps.o process.o osf_sys.o irq.o \
+obj-y    := head.o entry.o traps.o process.o osf_sys.o irq.o \
 	    irq_alpha.o signal.o setup.o ptrace.o time.o \
-	    systbls.o err_common.o io.o bugs.o
+	    systbls.o err_common.o io.o bugs.o termios.o
 
 obj-$(CONFIG_VGA_HOSE)	+= console.o
 obj-$(CONFIG_SMP)	+= smp.o
@@ -47,10 +47,6 @@ else
 # Misc support
 obj-$(CONFIG_ALPHA_SRM)		+= srmcons.o
 
-ifdef CONFIG_BINFMT_AOUT
-obj-y	+= binfmt_loader.o
-endif
-
 # Core logic support
 obj-$(CONFIG_ALPHA_APECS)	+= core_apecs.o
 obj-$(CONFIG_ALPHA_CIA)		+= core_cia.o
diff --git a/arch/alpha/kernel/asm-offsets.c b/arch/alpha/kernel/asm-offsets.c
index 2e125e5c1508..b121294bee26 100644
--- a/arch/alpha/kernel/asm-offsets.c
+++ b/arch/alpha/kernel/asm-offsets.c
@@ -17,6 +17,8 @@ void foo(void)
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
 	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
+	DEFINE(TI_FP, offsetof(struct thread_info, fp));
+	DEFINE(TI_STATUS, offsetof(struct thread_info, status));
 	BLANK();
 
         DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
diff --git a/arch/alpha/kernel/audit.c b/arch/alpha/kernel/audit.c
index 96a9d18ff4c4..3ab04709784a 100644
--- a/arch/alpha/kernel/audit.c
+++ b/arch/alpha/kernel/audit.c
@@ -37,13 +37,15 @@ int audit_classify_syscall(int abi, unsigned syscall)
 {
 	switch(syscall) {
 	case __NR_open:
-		return 2;
+		return AUDITSC_OPEN;
 	case __NR_openat:
-		return 3;
+		return AUDITSC_OPENAT;
 	case __NR_execve:
-		return 5;
+		return AUDITSC_EXECVE;
+	case __NR_openat2:
+		return AUDITSC_OPENAT2;
 	default:
-		return 0;
+		return AUDITSC_NATIVE;
 	}
 }
 
diff --git a/arch/alpha/kernel/binfmt_loader.c b/arch/alpha/kernel/binfmt_loader.c
deleted file mode 100644
index e4be7a543ecf..000000000000
--- a/arch/alpha/kernel/binfmt_loader.c
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/mm_types.h>
-#include <linux/binfmts.h>
-#include <linux/a.out.h>
-
-static int load_binary(struct linux_binprm *bprm)
-{
-	struct exec *eh = (struct exec *)bprm->buf;
-	unsigned long loader;
-	struct file *file;
-	int retval;
-
-	if (eh->fh.f_magic != 0x183 || (eh->fh.f_flags & 0x3000) != 0x3000)
-		return -ENOEXEC;
-
-	if (bprm->loader)
-		return -ENOEXEC;
-
-	loader = bprm->vma->vm_end - sizeof(void *);
-
-	file = open_exec("/sbin/loader");
-	retval = PTR_ERR(file);
-	if (IS_ERR(file))
-		return retval;
-
-	/* Remember if the application is TASO.  */
-	bprm->taso = eh->ah.entry < 0x100000000UL;
-
-	bprm->interpreter = file;
-	bprm->loader = loader;
-	return 0;
-}
-
-static struct linux_binfmt loader_format = {
-	.load_binary	= load_binary,
-};
-
-static int __init init_loader_binfmt(void)
-{
-	insert_binfmt(&loader_format);
-	return 0;
-}
-arch_initcall(init_loader_binfmt);
diff --git a/arch/alpha/kernel/core_cia.c b/arch/alpha/kernel/core_cia.c
index f489170201c3..12926e9538b8 100644
--- a/arch/alpha/kernel/core_cia.c
+++ b/arch/alpha/kernel/core_cia.c
@@ -527,7 +527,7 @@ verify_tb_operation(void)
 	if (use_tbia_try2) {
 		alpha_mv.mv_pci_tbi = cia_pci_tbi_try2;
 
-		/* Tags 0-3 must be disabled if we use this workaraund. */
+		/* Tags 0-3 must be disabled if we use this workaround. */
 		wmb();
 		*(vip)CIA_IOC_TB_TAGn(0) = 2;
 		*(vip)CIA_IOC_TB_TAGn(1) = 2;
diff --git a/arch/alpha/kernel/core_irongate.c b/arch/alpha/kernel/core_irongate.c
index 72af1e72d833..6b8ed12936b6 100644
--- a/arch/alpha/kernel/core_irongate.c
+++ b/arch/alpha/kernel/core_irongate.c
@@ -233,7 +233,7 @@ albacore_init_arch(void)
 			unsigned long size;
 
 			size = initrd_end - initrd_start;
-			memblock_free(__pa(initrd_start), PAGE_ALIGN(size));
+			memblock_free((void *)initrd_start, PAGE_ALIGN(size));
 			if (!move_initrd(pci_mem))
 				printk("irongate_init_arch: initrd too big "
 				       "(%ldK)\ndisabling initrd\n",
diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
index 4485b77f8658..e9348aec4649 100644
--- a/arch/alpha/kernel/core_marvel.c
+++ b/arch/alpha/kernel/core_marvel.c
@@ -287,8 +287,7 @@ io7_init_hose(struct io7 *io7, int port)
 	/*
 	 * Set up window 0 for scatter-gather 8MB at 8MB.
 	 */
-	hose->sg_isa = iommu_arena_new_node(marvel_cpuid_to_nid(io7->pe),
-					    hose, 0x00800000, 0x00800000, 0);
+	hose->sg_isa = iommu_arena_new_node(0, hose, 0x00800000, 0x00800000, 0);
 	hose->sg_isa->align_entry = 8;	/* cache line boundary */
 	csrs->POx_WBASE[0].csr = 
 		hose->sg_isa->dma_base | wbase_m_ena | wbase_m_sg;
@@ -305,8 +304,7 @@ io7_init_hose(struct io7 *io7, int port)
 	/*
 	 * Set up window 2 for scatter-gather (up-to) 1GB at 3GB.
 	 */
-	hose->sg_pci = iommu_arena_new_node(marvel_cpuid_to_nid(io7->pe),
-					    hose, 0xc0000000, 0x40000000, 0);
+	hose->sg_pci = iommu_arena_new_node(0, hose, 0xc0000000, 0x40000000, 0);
 	hose->sg_pci->align_entry = 8;	/* cache line boundary */
 	csrs->POx_WBASE[2].csr = 
 		hose->sg_pci->dma_base | wbase_m_ena | wbase_m_sg;
@@ -805,7 +803,7 @@ void __iomem *marvel_ioportmap (unsigned long addr)
 	return (void __iomem *)addr;
 }
 
-unsigned int
+u8
 marvel_ioread8(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
@@ -843,53 +841,8 @@ EXPORT_SYMBOL(marvel_ioportmap);
 EXPORT_SYMBOL(marvel_ioread8);
 EXPORT_SYMBOL(marvel_iowrite8);
 #endif
-
-/*
- * NUMA Support
- */
-/**********
- * FIXME - for now each cpu is a node by itself 
- *              -- no real support for striped mode 
- **********
- */
-int
-marvel_pa_to_nid(unsigned long pa)
-{
-	int cpuid;
 
-	if ((pa >> 43) & 1) 	/* I/O */ 
-		cpuid = (~(pa >> 35) & 0xff);
-	else			/* mem */
-		cpuid = ((pa >> 34) & 0x3) | ((pa >> (37 - 2)) & (0x1f << 2));
-
-	return marvel_cpuid_to_nid(cpuid);
-}
-
-int
-marvel_cpuid_to_nid(int cpuid)
-{
-	return cpuid;
-}
-
-unsigned long
-marvel_node_mem_start(int nid)
-{
-	unsigned long pa;
-
-	pa = (nid & 0x3) | ((nid & (0x1f << 2)) << 1);
-	pa <<= 34;
-
-	return pa;
-}
-
-unsigned long
-marvel_node_mem_size(int nid)
-{
-	return 16UL * 1024 * 1024 * 1024; /* 16GB */
-}
-
-
-/* 
+/*
  * AGP GART Support.
  */
 #include <linux/agp_backend.h>
diff --git a/arch/alpha/kernel/core_wildfire.c b/arch/alpha/kernel/core_wildfire.c
index e8d3b033018d..3a804b67f9da 100644
--- a/arch/alpha/kernel/core_wildfire.c
+++ b/arch/alpha/kernel/core_wildfire.c
@@ -434,39 +434,12 @@ wildfire_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-struct pci_ops wildfire_pci_ops = 
+struct pci_ops wildfire_pci_ops =
 {
 	.read =		wildfire_read_config,
 	.write =	wildfire_write_config,
 };
 
-
-/*
- * NUMA Support
- */
-int wildfire_pa_to_nid(unsigned long pa)
-{
-	return pa >> 36;
-}
-
-int wildfire_cpuid_to_nid(int cpuid)
-{
-	/* assume 4 CPUs per node */
-	return cpuid >> 2;
-}
-
-unsigned long wildfire_node_mem_start(int nid)
-{
-	/* 64GB per node */
-	return (unsigned long)nid * (64UL * 1024 * 1024 * 1024);
-}
-
-unsigned long wildfire_node_mem_size(int nid)
-{
-	/* 64GB per node */
-	return 64UL * 1024 * 1024 * 1024;
-}
-
 #if DEBUG_DUMP_REGS
 
 static void __init
diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index e227f3a29a43..eb51f93a70c8 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -17,7 +17,7 @@
 
 /* Stack offsets.  */
 #define SP_OFF			184
-#define SWITCH_STACK_SIZE	320
+#define SWITCH_STACK_SIZE	64
 
 .macro	CFI_START_OSF_FRAME	func
 	.align	4
@@ -159,7 +159,6 @@
 	.cfi_rel_offset	$13, 32
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
-	/* We don't really care about the FP registers for debugging.  */
 .endm
 
 .macro	UNDO_SWITCH_STACK
@@ -454,7 +453,7 @@ entSys:
 	SAVE_ALL
 	lda	$8, 0x3fff
 	bic	$sp, $8, $8
-	lda	$4, NR_SYSCALLS($31)
+	lda	$4, NR_syscalls($31)
 	stq	$16, SP_OFF+24($sp)
 	lda	$5, sys_call_table
 	lda	$27, sys_ni_syscall
@@ -469,13 +468,16 @@ entSys:
 #ifdef CONFIG_AUDITSYSCALL
 	lda     $6, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
 	and     $3, $6, $3
-#endif
 	bne     $3, strace
+#else
+	blbs    $3, strace		/* check for SYSCALL_TRACE in disguise */
+#endif
 	beq	$4, 1f
 	ldq	$27, 0($5)
 1:	jsr	$26, ($27), sys_ni_syscall
 	ldgp	$gp, 0($26)
 	blt	$0, $syscall_error	/* the call failed */
+$ret_success:
 	stq	$0, 0($sp)
 	stq	$31, 72($sp)		/* a3=0 => no error */
 
@@ -495,6 +497,10 @@ ret_to_user:
 	and	$17, _TIF_WORK_MASK, $2
 	bne	$2, work_pending
 restore_all:
+	ldl	$2, TI_STATUS($8)
+	and	$2, TS_SAVED_FP | TS_RESTORE_FP, $3
+	bne	$3, restore_fpu
+restore_other:
 	.cfi_remember_state
 	RESTORE_ALL
 	call_pal PAL_rti
@@ -503,7 +509,7 @@ ret_to_kernel:
 	.cfi_restore_state
 	lda	$16, 7
 	call_pal PAL_swpipl
-	br restore_all
+	br restore_other
 
 	.align 3
 $syscall_error:
@@ -525,11 +531,6 @@ $syscall_error:
 	stq	$1, 72($sp)	/* a3 for return */
 	br	ret_from_sys_call
 
-$ret_success:
-	stq	$0, 0($sp)
-	stq	$31, 72($sp)	/* a3=0 => no error */
-	br	ret_from_sys_call
-
 /*
  * Do all cleanup when returning from all interrupts and system calls.
  *
@@ -572,6 +573,14 @@ $work_notifysig:
 	.type	strace, @function
 strace:
 	/* set up signal stack, call syscall_trace */
+	// NB: if anyone adds preemption, this block will need to be protected
+	ldl	$1, TI_STATUS($8)
+	and	$1, TS_SAVED_FP, $3
+	or	$1, TS_SAVED_FP, $2
+	bne	$3, 1f
+	stl	$2, TI_STATUS($8)
+	bsr	$26, __save_fpu
+1:
 	DO_SWITCH_STACK
 	jsr	$26, syscall_trace_enter /* returns the syscall number */
 	UNDO_SWITCH_STACK
@@ -585,7 +594,7 @@ strace:
 	ldq	$21, 88($sp)
 
 	/* get the system call pointer.. */
-	lda	$1, NR_SYSCALLS($31)
+	lda	$1, NR_syscalls($31)
 	lda	$2, sys_call_table
 	lda	$27, sys_ni_syscall
 	cmpult	$0, $1, $1
@@ -598,8 +607,8 @@ ret_from_straced:
 
 	/* check return.. */
 	blt	$0, $strace_error	/* the call failed */
-	stq	$31, 72($sp)		/* a3=0 => no error */
 $strace_success:
+	stq	$31, 72($sp)		/* a3=0 => no error */
 	stq	$0, 0($sp)		/* save return value */
 
 	DO_SWITCH_STACK
@@ -651,40 +660,6 @@ do_switch_stack:
 	stq	$14, 40($sp)
 	stq	$15, 48($sp)
 	stq	$26, 56($sp)
-	stt	$f0, 64($sp)
-	stt	$f1, 72($sp)
-	stt	$f2, 80($sp)
-	stt	$f3, 88($sp)
-	stt	$f4, 96($sp)
-	stt	$f5, 104($sp)
-	stt	$f6, 112($sp)
-	stt	$f7, 120($sp)
-	stt	$f8, 128($sp)
-	stt	$f9, 136($sp)
-	stt	$f10, 144($sp)
-	stt	$f11, 152($sp)
-	stt	$f12, 160($sp)
-	stt	$f13, 168($sp)
-	stt	$f14, 176($sp)
-	stt	$f15, 184($sp)
-	stt	$f16, 192($sp)
-	stt	$f17, 200($sp)
-	stt	$f18, 208($sp)
-	stt	$f19, 216($sp)
-	stt	$f20, 224($sp)
-	stt	$f21, 232($sp)
-	stt	$f22, 240($sp)
-	stt	$f23, 248($sp)
-	stt	$f24, 256($sp)
-	stt	$f25, 264($sp)
-	stt	$f26, 272($sp)
-	stt	$f27, 280($sp)
-	mf_fpcr	$f0		# get fpcr
-	stt	$f28, 288($sp)
-	stt	$f29, 296($sp)
-	stt	$f30, 304($sp)
-	stt	$f0, 312($sp)	# save fpcr in slot of $f31
-	ldt	$f0, 64($sp)	# dont let "do_switch_stack" change fp state.
 	ret	$31, ($1), 1
 	.cfi_endproc
 	.size	do_switch_stack, .-do_switch_stack
@@ -703,54 +678,71 @@ undo_switch_stack:
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
 	ldq	$26, 56($sp)
-	ldt	$f30, 312($sp)	# get saved fpcr
-	ldt	$f0, 64($sp)
-	ldt	$f1, 72($sp)
-	ldt	$f2, 80($sp)
-	ldt	$f3, 88($sp)
-	mt_fpcr	$f30		# install saved fpcr
-	ldt	$f4, 96($sp)
-	ldt	$f5, 104($sp)
-	ldt	$f6, 112($sp)
-	ldt	$f7, 120($sp)
-	ldt	$f8, 128($sp)
-	ldt	$f9, 136($sp)
-	ldt	$f10, 144($sp)
-	ldt	$f11, 152($sp)
-	ldt	$f12, 160($sp)
-	ldt	$f13, 168($sp)
-	ldt	$f14, 176($sp)
-	ldt	$f15, 184($sp)
-	ldt	$f16, 192($sp)
-	ldt	$f17, 200($sp)
-	ldt	$f18, 208($sp)
-	ldt	$f19, 216($sp)
-	ldt	$f20, 224($sp)
-	ldt	$f21, 232($sp)
-	ldt	$f22, 240($sp)
-	ldt	$f23, 248($sp)
-	ldt	$f24, 256($sp)
-	ldt	$f25, 264($sp)
-	ldt	$f26, 272($sp)
-	ldt	$f27, 280($sp)
-	ldt	$f28, 288($sp)
-	ldt	$f29, 296($sp)
-	ldt	$f30, 304($sp)
 	lda	$sp, SWITCH_STACK_SIZE($sp)
 	ret	$31, ($1), 1
 	.cfi_endproc
 	.size	undo_switch_stack, .-undo_switch_stack
+
+#define FR(n) n * 8 + TI_FP($8)
+	.align	4
+	.globl	__save_fpu
+	.type	__save_fpu, @function
+__save_fpu:
+#define V(n) stt	$f##n, FR(n)
+	V( 0); V( 1); V( 2); V( 3)
+	V( 4); V( 5); V( 6); V( 7)
+	V( 8); V( 9); V(10); V(11)
+	V(12); V(13); V(14); V(15)
+	V(16); V(17); V(18); V(19)
+	V(20); V(21); V(22); V(23)
+	V(24); V(25); V(26); V(27)
+	mf_fpcr	$f0		# get fpcr
+	V(28); V(29); V(30)
+	stt	$f0, FR(31)	# save fpcr in slot of $f31
+	ldt	$f0, FR(0)	# don't let "__save_fpu" change fp state.
+	ret
+#undef V
+	.size	__save_fpu, .-__save_fpu
+
+	.align	4
+restore_fpu:
+	and	$3, TS_RESTORE_FP, $3
+	bic	$2, TS_SAVED_FP | TS_RESTORE_FP, $2
+	beq	$3, 1f
+#define V(n) ldt	$f##n, FR(n)
+	ldt	$f30, FR(31)	# get saved fpcr
+	V( 0); V( 1); V( 2); V( 3)
+	mt_fpcr	$f30		# install saved fpcr
+	V( 4); V( 5); V( 6); V( 7)
+	V( 8); V( 9); V(10); V(11)
+	V(12); V(13); V(14); V(15)
+	V(16); V(17); V(18); V(19)
+	V(20); V(21); V(22); V(23)
+	V(24); V(25); V(26); V(27)
+	V(28); V(29); V(30)
+1:	stl $2, TI_STATUS($8)
+	br restore_other
+#undef V
+
 
 /*
  * The meat of the context switch code.
  */
-
 	.align	4
 	.globl	alpha_switch_to
 	.type	alpha_switch_to, @function
 	.cfi_startproc
 alpha_switch_to:
 	DO_SWITCH_STACK
+	ldl	$1, TI_STATUS($8)
+	and	$1, TS_RESTORE_FP, $3
+	bne	$3, 1f
+	or	$1, TS_RESTORE_FP | TS_SAVED_FP, $2
+	and	$1, TS_SAVED_FP, $3
+	stl	$2, TI_STATUS($8)
+	bne	$3, 1f
+	bsr	$26, __save_fpu
+1:
 	call_pal PAL_swpctx
 	lda	$8, 0x3fff
 	UNDO_SWITCH_STACK
@@ -768,7 +760,7 @@ alpha_switch_to:
 	.align	4
 	.ent	ret_from_fork
 ret_from_fork:
-	lda	$26, ret_from_sys_call
+	lda	$26, ret_to_user
 	mov	$17, $16
 	jmp	$31, schedule_tail
 .end ret_from_fork
@@ -801,6 +793,14 @@ ret_from_kernel_thread:
 alpha_\name:
 	.prologue 0
 	bsr	$1, do_switch_stack
+	// NB: if anyone adds preemption, this block will need to be protected
+	ldl	$1, TI_STATUS($8)
+	and	$1, TS_SAVED_FP, $3
+	or	$1, TS_SAVED_FP, $2
+	bne	$3, 1f
+	stl	$2, TI_STATUS($8)
+	bsr	$26, __save_fpu
+1:
 	jsr	$26, sys_\name
 	ldq	$26, 56($sp)
 	lda	$sp, SWITCH_STACK_SIZE($sp)
diff --git a/arch/alpha/kernel/io.c b/arch/alpha/kernel/io.c
index 838586abb1e0..eda09778268f 100644
--- a/arch/alpha/kernel/io.c
+++ b/arch/alpha/kernel/io.c
@@ -41,6 +41,15 @@ unsigned int ioread32(const void __iomem *addr)
 	return ret;
 }
 
+u64 ioread64(const void __iomem *addr)
+{
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread64)(addr);
+	mb();
+	return ret;
+}
+
 void iowrite8(u8 b, void __iomem *addr)
 {
 	mb();
@@ -59,12 +68,20 @@ void iowrite32(u32 b, void __iomem *addr)
 	IO_CONCAT(__IO_PREFIX,iowrite32)(b, addr);
 }
 
+void iowrite64(u64 b, void __iomem *addr)
+{
+	mb();
+	IO_CONCAT(__IO_PREFIX,iowrite64)(b, addr);
+}
+
 EXPORT_SYMBOL(ioread8);
 EXPORT_SYMBOL(ioread16);
 EXPORT_SYMBOL(ioread32);
+EXPORT_SYMBOL(ioread64);
 EXPORT_SYMBOL(iowrite8);
 EXPORT_SYMBOL(iowrite16);
 EXPORT_SYMBOL(iowrite32);
+EXPORT_SYMBOL(iowrite64);
 
 u8 inb(unsigned long port)
 {
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index f6d2946edbd2..15f2effd6baf 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -60,7 +60,7 @@ int irq_select_affinity(unsigned int irq)
 		cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
 	last_cpu = cpu;
 
-	cpumask_copy(irq_data_get_affinity_mask(data), cpumask_of(cpu));
+	irq_data_update_affinity(data, cpumask_of(cpu));
 	chip->irq_set_affinity(data, cpumask_of(cpu), false);
 	return 0;
 }
diff --git a/arch/alpha/kernel/machvec_impl.h b/arch/alpha/kernel/machvec_impl.h
index 393d5d6ca5d2..c2ebcb39e589 100644
--- a/arch/alpha/kernel/machvec_impl.h
+++ b/arch/alpha/kernel/machvec_impl.h
@@ -78,9 +78,11 @@
 	.mv_ioread8 =		CAT(low,_ioread8),			\
 	.mv_ioread16 =		CAT(low,_ioread16),			\
 	.mv_ioread32 =		CAT(low,_ioread32),			\
+	.mv_ioread64 =		CAT(low,_ioread64),			\
 	.mv_iowrite8 =		CAT(low,_iowrite8),			\
 	.mv_iowrite16 =		CAT(low,_iowrite16),			\
 	.mv_iowrite32 =		CAT(low,_iowrite32),			\
+	.mv_iowrite64 =		CAT(low,_iowrite64),			\
 	.mv_readb =		CAT(low,_readb),			\
 	.mv_readw =		CAT(low,_readw),			\
 	.mv_readl =		CAT(low,_readl),			\
diff --git a/arch/alpha/kernel/module.c b/arch/alpha/kernel/module.c
index 5b60c248de9e..cbefa5a77384 100644
--- a/arch/alpha/kernel/module.c
+++ b/arch/alpha/kernel/module.c
@@ -146,10 +146,8 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
 	base = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr;
 	symtab = (Elf64_Sym *)sechdrs[symindex].sh_addr;
 
-	/* The small sections were sorted to the end of the segment.
-	   The following should definitely cover them.  */
-	gp = (u64)me->core_layout.base + me->core_layout.size - 0x8000;
 	got = sechdrs[me->arch.gotsecindex].sh_addr;
+	gp = got + 0x8000;
 
 	for (i = 0; i < n; i++) {
 		unsigned long r_sym = ELF64_R_SYM (rela[i].r_info);
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index d5367a1c6300..2a9a877a0508 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -36,6 +36,7 @@
 #include <linux/types.h>
 #include <linux/ipc.h>
 #include <linux/namei.h>
+#include <linux/mount.h>
 #include <linux/uio.h>
 #include <linux/vfs.h>
 #include <linux/rcupdate.h>
@@ -107,7 +108,7 @@ struct osf_dirent_callback {
 	int error;
 };
 
-static int
+static bool
 osf_filldir(struct dir_context *ctx, const char *name, int namlen,
 	    loff_t offset, u64 ino, unsigned int d_type)
 {
@@ -119,11 +120,11 @@ osf_filldir(struct dir_context *ctx, const char *name, int namlen,
 
 	buf->error = -EINVAL;	/* only used if we fail */
 	if (reclen > buf->count)
-		return -EINVAL;
+		return false;
 	d_ino = ino;
 	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
 		buf->error = -EOVERFLOW;
-		return -EOVERFLOW;
+		return false;
 	}
 	if (buf->basep) {
 		if (put_user(offset, buf->basep))
@@ -140,10 +141,10 @@ osf_filldir(struct dir_context *ctx, const char *name, int namlen,
 	dirent = (void __user *)dirent + reclen;
 	buf->dirent = dirent;
 	buf->count -= reclen;
-	return 0;
+	return true;
 Efault:
 	buf->error = -EFAULT;
-	return -EFAULT;
+	return false;
 }
 
 SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd,
@@ -521,7 +522,7 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, const char __user *, path,
 		break;
 	default:
 		retval = -EINVAL;
-		printk("osf_mount(%ld, %x)\n", typenr, flag);
+		printk_ratelimited("osf_mount(%ld, %x)\n", typenr, flag);
 	}
 
 	return retval;
@@ -834,7 +835,7 @@ SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer,
 			return -EFAULT;
 		state = &current_thread_info()->ieee_state;
 
-		/* Update softare trap enable bits.  */
+		/* Update software trap enable bits.  */
 		*state = (*state & ~IEEE_SW_MASK) | (swcr & IEEE_SW_MASK);
 
 		/* Update the real fpcr.  */
@@ -854,7 +855,7 @@ SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer,
 		state = &current_thread_info()->ieee_state;
 		exc &= IEEE_STATUS_MASK;
 
-		/* Update softare trap enable bits.  */
+		/* Update software trap enable bits.  */
  		swcr = (*state & IEEE_SW_MASK) | exc;
 		*state |= exc;
 
@@ -876,7 +877,7 @@ SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer,
 			if (fex & IEEE_TRAP_ENABLE_DZE) si_code = FPE_FLTDIV;
 			if (fex & IEEE_TRAP_ENABLE_INV) si_code = FPE_FLTINV;
 
-			send_sig_fault(SIGFPE, si_code,
+			send_sig_fault_trapno(SIGFPE, si_code,
 				       (void __user *)NULL,  /* FIXME */
 				       0, current);
  		}
@@ -1277,48 +1278,6 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	return addr;
 }
 
-#ifdef CONFIG_OSF4_COMPAT
-/* Clear top 32 bits of iov_len in the user's buffer for
-   compatibility with old versions of OSF/1 where iov_len
-   was defined as int. */
-static int
-osf_fix_iov_len(const struct iovec __user *iov, unsigned long count)
-{
-	unsigned long i;
-
-	for (i = 0 ; i < count ; i++) {
-		int __user *iov_len_high = (int __user *)&iov[i].iov_len + 1;
-
-		if (put_user(0, iov_len_high))
-			return -EFAULT;
-	}
-	return 0;
-}
-#endif
-
-SYSCALL_DEFINE3(osf_readv, unsigned long, fd,
-		const struct iovec __user *, vector, unsigned long, count)
-{
-#ifdef CONFIG_OSF4_COMPAT
-	if (unlikely(personality(current->personality) == PER_OSF4))
-		if (osf_fix_iov_len(vector, count))
-			return -EFAULT;
-#endif
-
-	return sys_readv(fd, vector, count);
-}
-
-SYSCALL_DEFINE3(osf_writev, unsigned long, fd,
-		const struct iovec __user *, vector, unsigned long, count)
-{
-#ifdef CONFIG_OSF4_COMPAT
-	if (unlikely(personality(current->personality) == PER_OSF4))
-		if (osf_fix_iov_len(vector, count))
-			return -EFAULT;
-#endif
-	return sys_writev(fd, vector, count);
-}
-
 SYSCALL_DEFINE2(osf_getpriority, int, which, int, who)
 {
 	int prio = sys_getpriority(which, who);
diff --git a/arch/alpha/kernel/pc873xx.c b/arch/alpha/kernel/pc873xx.c
index 63aee5d86e02..82b19c9e59d6 100644
--- a/arch/alpha/kernel/pc873xx.c
+++ b/arch/alpha/kernel/pc873xx.c
@@ -13,12 +13,12 @@ static char *pc873xx_names[] = {
 static unsigned int base, model;
 
 
-unsigned int __init pc873xx_get_base()
+unsigned int __init pc873xx_get_base(void)
 {
 	return base;
 }
 
-char *__init pc873xx_get_model()
+char *__init pc873xx_get_model(void)
 {
 	return pc873xx_names[model];
 }
diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c
index 0021580d79ad..5808a66e2a81 100644
--- a/arch/alpha/kernel/pci-sysfs.c
+++ b/arch/alpha/kernel/pci-sysfs.c
@@ -60,6 +60,8 @@ static int __pci_mmap_fits(struct pci_dev *pdev, int num,
  * @sparse: address space type
  *
  * Use the bus mapping routines to map a PCI resource into userspace.
+ *
+ * Return: %0 on success, negative error code otherwise
  */
 static int pci_mmap_resource(struct kobject *kobj,
 			     struct bin_attribute *attr,
@@ -106,7 +108,7 @@ static int pci_mmap_resource_dense(struct file *filp, struct kobject *kobj,
 
 /**
  * pci_remove_resource_files - cleanup resource files
- * @dev: dev to cleanup
+ * @pdev: pci_dev to cleanup
  *
  * If we created resource files for @dev, remove them from sysfs and
  * free their resources.
@@ -221,10 +223,12 @@ static int pci_create_attr(struct pci_dev *pdev, int num)
 }
 
 /**
- * pci_create_resource_files - create resource files in sysfs for @dev
- * @dev: dev in question
+ * pci_create_resource_files - create resource files in sysfs for @pdev
+ * @pdev: pci_dev in question
  *
  * Walk the resources in @dev creating files for each resource available.
+ *
+ * Return: %0 on success, or negative error code
  */
 int pci_create_resource_files(struct pci_dev *pdev)
 {
@@ -296,7 +300,7 @@ int pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma,
 
 /**
  * pci_adjust_legacy_attr - adjustment of legacy file attributes
- * @b: bus to create files under
+ * @bus: bus to create files under
  * @mmap_type: I/O port or memory
  *
  * Adjust file name and size for sparse mappings.
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index 64fbfb0763b2..4458eb7f44f0 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -288,11 +288,10 @@ pcibios_claim_one_bus(struct pci_bus *b)
 	struct pci_bus *child_bus;
 
 	list_for_each_entry(dev, &b->devices, bus_list) {
+		struct resource *r;
 		int i;
 
-		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-			struct resource *r = &dev->resource[i];
-
+		pci_dev_for_each_resource(dev, r, i) {
 			if (r->parent || !r->start || !r->flags)
 				continue;
 			if (pci_has_flag(PCI_PROBE_ONLY) ||
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index d84b19aa8e9d..c81183935e97 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -71,33 +71,6 @@ iommu_arena_new_node(int nid, struct pci_controller *hose, dma_addr_t base,
 	if (align < mem_size)
 		align = mem_size;
 
-
-#ifdef CONFIG_DISCONTIGMEM
-
-	arena = memblock_alloc_node(sizeof(*arena), align, nid);
-	if (!NODE_DATA(nid) || !arena) {
-		printk("%s: couldn't allocate arena from node %d\n"
-		       "    falling back to system-wide allocation\n",
-		       __func__, nid);
-		arena = memblock_alloc(sizeof(*arena), SMP_CACHE_BYTES);
-		if (!arena)
-			panic("%s: Failed to allocate %zu bytes\n", __func__,
-			      sizeof(*arena));
-	}
-
-	arena->ptes = memblock_alloc_node(sizeof(*arena), align, nid);
-	if (!NODE_DATA(nid) || !arena->ptes) {
-		printk("%s: couldn't allocate arena ptes from node %d\n"
-		       "    falling back to system-wide allocation\n",
-		       __func__, nid);
-		arena->ptes = memblock_alloc(mem_size, align);
-		if (!arena->ptes)
-			panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-			      __func__, mem_size, align);
-	}
-
-#else /* CONFIG_DISCONTIGMEM */
-
 	arena = memblock_alloc(sizeof(*arena), SMP_CACHE_BYTES);
 	if (!arena)
 		panic("%s: Failed to allocate %zu bytes\n", __func__,
@@ -107,8 +80,6 @@ iommu_arena_new_node(int nid, struct pci_controller *hose, dma_addr_t base,
 		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
 		      __func__, mem_size, align);
 
-#endif /* CONFIG_DISCONTIGMEM */
-
 	spin_lock_init(&arena->lock);
 	arena->hose = hose;
 	arena->dma_base = base;
@@ -156,10 +127,12 @@ again:
 			goto again;
 		}
 
-		if (ptes[p+i])
-			p = ALIGN(p + i + 1, mask + 1), i = 0;
-		else
+		if (ptes[p+i]) {
+			p = ALIGN(p + i + 1, mask + 1);
+			i = 0;
+		} else {
 			i = i + 1;
+		}
 	}
 
 	if (i < n) {
@@ -362,7 +335,7 @@ static dma_addr_t alpha_pci_map_page(struct device *dev, struct page *page,
 	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	int dac_allowed;
 
-	BUG_ON(dir == PCI_DMA_NONE);
+	BUG_ON(dir == DMA_NONE);
 
 	dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0; 
 	return pci_map_single_1(pdev, (char *)page_address(page) + offset, 
@@ -385,7 +358,7 @@ static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
 	struct pci_iommu_arena *arena;
 	long dma_ofs, npages;
 
-	BUG_ON(dir == PCI_DMA_NONE);
+	BUG_ON(dir == DMA_NONE);
 
 	if (dma_addr >= __direct_map_base
 	    && dma_addr < __direct_map_base + __direct_map_size) {
@@ -489,7 +462,7 @@ static void alpha_pci_free_coherent(struct device *dev, size_t size,
 				    unsigned long attrs)
 {
 	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
-	pci_unmap_single(pdev, dma_addr, size, PCI_DMA_BIDIRECTIONAL);
+	dma_unmap_single(&pdev->dev, dma_addr, size, DMA_BIDIRECTIONAL);
 	free_pages((unsigned long)cpu_addr, get_order(size));
 
 	DBGA2("pci_free_consistent: [%llx,%zx] from %ps\n",
@@ -668,7 +641,7 @@ static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
 	dma_addr_t max_dma;
 	int dac_allowed;
 
-	BUG_ON(dir == PCI_DMA_NONE);
+	BUG_ON(dir == DMA_NONE);
 
 	dac_allowed = dev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
 
@@ -678,7 +651,9 @@ static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
 		sg->dma_address
 		  = pci_map_single_1(pdev, SG_ENT_VIRT_ADDRESS(sg),
 				     sg->length, dac_allowed);
-		return sg->dma_address != DMA_MAPPING_ERROR;
+		if (sg->dma_address == DMA_MAPPING_ERROR)
+			return -EIO;
+		return 1;
 	}
 
 	start = sg;
@@ -714,8 +689,10 @@ static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
 	if (out < end)
 		out->dma_length = 0;
 
-	if (out - start == 0)
+	if (out - start == 0) {
 		printk(KERN_WARNING "pci_map_sg failed: no entries?\n");
+		return -ENOMEM;
+	}
 	DBGA("pci_map_sg: %ld entries\n", out - start);
 
 	return out - start;
@@ -727,8 +704,8 @@ static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
 	/* Some allocation failed while mapping the scatterlist
 	   entries.  Unmap them now.  */
 	if (out > start)
-		pci_unmap_sg(pdev, start, out - start, dir);
-	return 0;
+		dma_unmap_sg(&pdev->dev, start, out - start, dir);
+	return -ENOMEM;
 }
 
 /* Unmap a set of streaming mode DMA translations.  Again, cpu read
@@ -747,7 +724,7 @@ static void alpha_pci_unmap_sg(struct device *dev, struct scatterlist *sg,
 	dma_addr_t max_dma;
 	dma_addr_t fbeg, fend;
 
-	BUG_ON(dir == PCI_DMA_NONE);
+	BUG_ON(dir == DMA_NONE);
 
 	if (! alpha_mv.mv_pci_tbi)
 		return;
diff --git a/arch/alpha/kernel/perf_event.c b/arch/alpha/kernel/perf_event.c
index e7a59d927d78..ccdb508c1516 100644
--- a/arch/alpha/kernel/perf_event.c
+++ b/arch/alpha/kernel/perf_event.c
@@ -574,7 +574,7 @@ static void alpha_pmu_start(struct perf_event *event, int flags)
  * Check that CPU performance counters are supported.
  * - currently support EV67 and later CPUs.
  * - actually some later revisions of the EV6 have the same PMC model as the
- *     EV67 but we don't do suffiently deep CPU detection to detect them.
+ *     EV67 but we don't do sufficiently deep CPU detection to detect them.
  *     Bad luck to the very few people who might have one, I guess.
  */
 static int supported_cpu(void)
@@ -689,8 +689,6 @@ static int __hw_perf_event_init(struct perf_event *event)
  */
 static int alpha_pmu_event_init(struct perf_event *event)
 {
-	int err;
-
 	/* does not support taken branch sampling */
 	if (has_branch_stack(event))
 		return -EOPNOTSUPP;
@@ -709,9 +707,7 @@ static int alpha_pmu_event_init(struct perf_event *event)
 		return -ENODEV;
 
 	/* Do the real initialisation work. */
-	err = __hw_perf_event_init(event);
-
-	return err;
+	return __hw_perf_event_init(event);
 }
 
 /*
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 5112ab996394..582d96548385 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -9,6 +9,7 @@
  * This file handles the architecture-dependent parts of process handling.
  */
 
+#include <linux/cpu.h>
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/sched.h>
@@ -57,12 +58,12 @@ EXPORT_SYMBOL(pm_power_off);
 void arch_cpu_idle(void)
 {
 	wtint(0);
-	raw_local_irq_enable();
 }
 
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	wtint(INT_MAX);
+	BUG();
 }
 #endif /* ALPHA_WTINT */
 
@@ -74,7 +75,7 @@ struct halt_info {
 static void
 common_shutdown_1(void *generic_ptr)
 {
-	struct halt_info *how = (struct halt_info *)generic_ptr;
+	struct halt_info *how = generic_ptr;
 	struct percpu_struct *cpup;
 	unsigned long *pflags, flags;
 	int cpuid = smp_processor_id();
@@ -125,7 +126,7 @@ common_shutdown_1(void *generic_ptr)
 	/* Wait for the secondaries to halt. */
 	set_cpu_present(boot_cpuid, false);
 	set_cpu_possible(boot_cpuid, false);
-	while (cpumask_weight(cpu_present_mask))
+	while (!cpumask_empty(cpu_present_mask))
 		barrier();
 #endif
 
@@ -134,7 +135,7 @@ common_shutdown_1(void *generic_ptr)
 #ifdef CONFIG_DUMMY_CONSOLE
 		/* If we've gotten here after SysRq-b, leave interrupt
 		   context before taking over the console. */
-		if (in_irq())
+		if (in_hardirq())
 			irq_exit();
 		/* This has the effect of resetting the VGA video origin.  */
 		console_lock();
@@ -225,18 +226,14 @@ flush_thread(void)
 	current_thread_info()->pcb.unique = 0;
 }
 
-void
-release_thread(struct task_struct *dead_task)
-{
-}
-
 /*
  * Copy architecture-specific thread state
  */
-int copy_thread(unsigned long clone_flags, unsigned long usp,
-		unsigned long kthread_arg, struct task_struct *p,
-		unsigned long tls)
+int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
+	unsigned long clone_flags = args->flags;
+	unsigned long usp = args->stack;
+	unsigned long tls = args->tls;
 	extern void ret_from_fork(void);
 	extern void ret_from_kernel_thread(void);
 
@@ -248,15 +245,17 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	childstack = ((struct switch_stack *) childregs) - 1;
 	childti->pcb.ksp = (unsigned long) childstack;
 	childti->pcb.flags = 1;	/* set FEN, clear everything else */
+	childti->status |= TS_SAVED_FP | TS_RESTORE_FP;
 
-	if (unlikely(p->flags & (PF_KTHREAD | PF_IO_WORKER))) {
+	if (unlikely(args->fn)) {
 		/* kernel thread */
 		memset(childstack, 0,
 			sizeof(struct switch_stack) + sizeof(struct pt_regs));
 		childstack->r26 = (unsigned long) ret_from_kernel_thread;
-		childstack->r9 = usp;	/* function */
-		childstack->r10 = kthread_arg;
-		childregs->hae = alpha_mv.hae_cache,
+		childstack->r9 = (unsigned long) args->fn;
+		childstack->r10 = (unsigned long) args->fn_arg;
+		childregs->hae = alpha_mv.hae_cache;
+		memset(childti->fp, '\0', sizeof(childti->fp));
 		childti->pcb.usp = 0;
 		return 0;
 	}
@@ -337,14 +336,11 @@ dump_elf_task(elf_greg_t *dest, struct task_struct *task)
 }
 EXPORT_SYMBOL(dump_elf_task);
 
-int
-dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task)
+int elf_core_copy_task_fpregs(struct task_struct *t, elf_fpregset_t *fpu)
 {
-	struct switch_stack *sw = (struct switch_stack *)task_pt_regs(task) - 1;
-	memcpy(dest, sw->fp, 32 * 8);
+	memcpy(fpu, task_thread_info(t)->fp, 32 * 8);
 	return 1;
 }
-EXPORT_SYMBOL(dump_elf_task_fp);
 
 /*
  * Return saved PC of a blocked thread.  This assumes the frame
@@ -376,12 +372,11 @@ thread_saved_pc(struct task_struct *t)
 }
 
 unsigned long
-get_wchan(struct task_struct *p)
+__get_wchan(struct task_struct *p)
 {
 	unsigned long schedule_frame;
 	unsigned long pc;
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
+
 	/*
 	 * This one depends on the frame size of schedule().  Do a
 	 * "disass schedule" in gdb to find the frame size.  Also, the
diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h
index 701a05090141..5816a31c1b38 100644
--- a/arch/alpha/kernel/proto.h
+++ b/arch/alpha/kernel/proto.h
@@ -49,10 +49,6 @@ extern void marvel_init_arch(void);
 extern void marvel_kill_arch(int);
 extern void marvel_machine_check(unsigned long, unsigned long);
 extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-extern int marvel_pa_to_nid(unsigned long);
-extern int marvel_cpuid_to_nid(int);
-extern unsigned long marvel_node_mem_start(int);
-extern unsigned long marvel_node_mem_size(int);
 extern struct _alpha_agp_info *marvel_agp_info(void);
 struct io7 *marvel_find_io7(int pe);
 struct io7 *marvel_next_io7(struct io7 *prev);
@@ -101,10 +97,6 @@ extern void wildfire_init_arch(void);
 extern void wildfire_kill_arch(int);
 extern void wildfire_machine_check(unsigned long vector, unsigned long la_ptr);
 extern void wildfire_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-extern int wildfire_pa_to_nid(unsigned long);
-extern int wildfire_cpuid_to_nid(int);
-extern unsigned long wildfire_node_mem_start(int);
-extern unsigned long wildfire_node_mem_size(int);
 
 /* console.c */
 #ifdef CONFIG_VGA_HOSE
diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c
index 8c43212ae38e..fde4c68e7a0b 100644
--- a/arch/alpha/kernel/ptrace.c
+++ b/arch/alpha/kernel/ptrace.c
@@ -15,7 +15,6 @@
 #include <linux/user.h>
 #include <linux/security.h>
 #include <linux/signal.h>
-#include <linux/tracehook.h>
 #include <linux/audit.h>
 
 #include <linux/uaccess.h>
@@ -79,6 +78,8 @@ enum {
  (PAGE_SIZE*2 - sizeof(struct pt_regs) - sizeof(struct switch_stack) \
   + offsetof(struct switch_stack, reg))
 
+#define FP_REG(reg) (offsetof(struct thread_info, reg))
+
 static int regoff[] = {
 	PT_REG(	   r0), PT_REG(	   r1), PT_REG(	   r2), PT_REG(	  r3),
 	PT_REG(	   r4), PT_REG(	   r5), PT_REG(	   r6), PT_REG(	  r7),
@@ -88,14 +89,14 @@ static int regoff[] = {
 	PT_REG(	  r20), PT_REG(	  r21), PT_REG(	  r22), PT_REG(	 r23),
 	PT_REG(	  r24), PT_REG(	  r25), PT_REG(	  r26), PT_REG(	 r27),
 	PT_REG(	  r28), PT_REG(	   gp),		   -1,		   -1,
-	SW_REG(fp[ 0]), SW_REG(fp[ 1]), SW_REG(fp[ 2]), SW_REG(fp[ 3]),
-	SW_REG(fp[ 4]), SW_REG(fp[ 5]), SW_REG(fp[ 6]), SW_REG(fp[ 7]),
-	SW_REG(fp[ 8]), SW_REG(fp[ 9]), SW_REG(fp[10]), SW_REG(fp[11]),
-	SW_REG(fp[12]), SW_REG(fp[13]), SW_REG(fp[14]), SW_REG(fp[15]),
-	SW_REG(fp[16]), SW_REG(fp[17]), SW_REG(fp[18]), SW_REG(fp[19]),
-	SW_REG(fp[20]), SW_REG(fp[21]), SW_REG(fp[22]), SW_REG(fp[23]),
-	SW_REG(fp[24]), SW_REG(fp[25]), SW_REG(fp[26]), SW_REG(fp[27]),
-	SW_REG(fp[28]), SW_REG(fp[29]), SW_REG(fp[30]), SW_REG(fp[31]),
+	FP_REG(fp[ 0]), FP_REG(fp[ 1]), FP_REG(fp[ 2]), FP_REG(fp[ 3]),
+	FP_REG(fp[ 4]), FP_REG(fp[ 5]), FP_REG(fp[ 6]), FP_REG(fp[ 7]),
+	FP_REG(fp[ 8]), FP_REG(fp[ 9]), FP_REG(fp[10]), FP_REG(fp[11]),
+	FP_REG(fp[12]), FP_REG(fp[13]), FP_REG(fp[14]), FP_REG(fp[15]),
+	FP_REG(fp[16]), FP_REG(fp[17]), FP_REG(fp[18]), FP_REG(fp[19]),
+	FP_REG(fp[20]), FP_REG(fp[21]), FP_REG(fp[22]), FP_REG(fp[23]),
+	FP_REG(fp[24]), FP_REG(fp[25]), FP_REG(fp[26]), FP_REG(fp[27]),
+	FP_REG(fp[28]), FP_REG(fp[29]), FP_REG(fp[30]), FP_REG(fp[31]),
 	PT_REG(	   pc)
 };
 
@@ -323,7 +324,7 @@ asmlinkage unsigned long syscall_trace_enter(void)
 	unsigned long ret = 0;
 	struct pt_regs *regs = current_pt_regs();
 	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    tracehook_report_syscall_entry(current_pt_regs()))
+	    ptrace_report_syscall_entry(current_pt_regs()))
 		ret = -1UL;
 	audit_syscall_entry(regs->r0, regs->r16, regs->r17, regs->r18, regs->r19);
 	return ret ?: current_pt_regs()->r0;
@@ -334,5 +335,5 @@ syscall_trace_leave(void)
 {
 	audit_syscall_exit(current_pt_regs());
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall_exit(current_pt_regs(), 0);
+		ptrace_report_syscall_exit(current_pt_regs(), 0);
 }
diff --git a/arch/alpha/kernel/rtc.c b/arch/alpha/kernel/rtc.c
index ce3077946e1d..fb3025396ac9 100644
--- a/arch/alpha/kernel/rtc.c
+++ b/arch/alpha/kernel/rtc.c
@@ -80,7 +80,12 @@ init_rtc_epoch(void)
 static int
 alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	mc146818_get_time(tm);
+	int ret = mc146818_get_time(tm);
+
+	if (ret < 0) {
+		dev_err_ratelimited(dev, "unable to read current time\n");
+		return ret;
+	}
 
 	/* Adjust for non-default epochs.  It's easier to depend on the
 	   generic __get_rtc_time and adjust the epoch here than create
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
index 03dda3beb3bd..33bf3a627002 100644
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/ioport.h>
+#include <linux/panic_notifier.h>
 #include <linux/platform_device.h>
 #include <linux/memblock.h>
 #include <linux/pci.h>
@@ -46,7 +47,6 @@
 #include <linux/log2.h>
 #include <linux/export.h>
 
-extern struct atomic_notifier_head panic_notifier_list;
 static int alpha_panic_event(struct notifier_block *, unsigned long, void *);
 static struct notifier_block alpha_panic_block = {
 	alpha_panic_event,
@@ -79,11 +79,6 @@ int alpha_l3_cacheshape;
 unsigned long alpha_verbose_mcheck = CONFIG_VERBOSE_MCHECK_ON;
 #endif
 
-#ifdef CONFIG_NUMA
-struct cpumask node_to_cpumask_map[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL(node_to_cpumask_map);
-#endif
-
 /* Which processor we booted from.  */
 int boot_cpuid;
 
@@ -305,7 +300,6 @@ move_initrd(unsigned long mem_limit)
 }
 #endif
 
-#ifndef CONFIG_DISCONTIGMEM
 static void __init
 setup_memory(void *kernel_end)
 {
@@ -325,18 +319,19 @@ setup_memory(void *kernel_end)
 		       i, cluster->usage, cluster->start_pfn,
 		       cluster->start_pfn + cluster->numpages);
 
-		/* Bit 0 is console/PALcode reserved.  Bit 1 is
-		   non-volatile memory -- we might want to mark
-		   this for later.  */
-		if (cluster->usage & 3)
-			continue;
-
 		end = cluster->start_pfn + cluster->numpages;
 		if (end > max_low_pfn)
 			max_low_pfn = end;
 
 		memblock_add(PFN_PHYS(cluster->start_pfn),
 			     cluster->numpages << PAGE_SHIFT);
+
+		/* Bit 0 is console/PALcode reserved.  Bit 1 is
+		   non-volatile memory -- we might want to mark
+		   this for later.  */
+		if (cluster->usage & 3)
+			memblock_reserve(PFN_PHYS(cluster->start_pfn),
+				         cluster->numpages << PAGE_SHIFT);
 	}
 
 	/*
@@ -389,9 +384,6 @@ setup_memory(void *kernel_end)
 	}
 #endif /* CONFIG_BLK_DEV_INITRD */
 }
-#else
-extern void setup_memory(void *);
-#endif /* !CONFIG_DISCONTIGMEM */
 
 int __init
 page_is_ram(unsigned long pfn)
@@ -499,9 +491,9 @@ setup_arch(char **cmdline_p)
 	   boot flags depending on the boot mode, we need some shorthand.
 	   This should do for installation.  */
 	if (strcmp(COMMAND_LINE, "INSTALL") == 0) {
-		strlcpy(command_line, "root=/dev/fd0 load_ramdisk=1", sizeof command_line);
+		strscpy(command_line, "root=/dev/fd0 load_ramdisk=1", sizeof(command_line));
 	} else {
-		strlcpy(command_line, COMMAND_LINE, sizeof command_line);
+		strscpy(command_line, COMMAND_LINE, sizeof(command_line));
 	}
 	strcpy(boot_command_line, command_line);
 	*cmdline_p = command_line;
@@ -618,13 +610,6 @@ setup_arch(char **cmdline_p)
 	       "VERBOSE_MCHECK "
 #endif
 
-#ifdef CONFIG_DISCONTIGMEM
-	       "DISCONTIGMEM "
-#ifdef CONFIG_NUMA
-	       "NUMA "
-#endif
-#endif
-
 #ifdef CONFIG_DEBUG_SPINLOCK
 	       "DEBUG_SPINLOCK "
 #endif
diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index 948b89789da8..e62d1d461b1f 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -22,7 +22,7 @@
 #include <linux/binfmts.h>
 #include <linux/bitops.h>
 #include <linux/syscalls.h>
-#include <linux/tracehook.h>
+#include <linux/resume_user_mode.h>
 
 #include <linux/uaccess.h>
 #include <asm/sigcontext.h>
@@ -150,9 +150,10 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
 {
 	unsigned long usp;
 	struct switch_stack *sw = (struct switch_stack *)regs - 1;
-	long i, err = __get_user(regs->pc, &sc->sc_pc);
+	long err = __get_user(regs->pc, &sc->sc_pc);
 
 	current->restart_block.fn = do_no_restart_syscall;
+	current_thread_info()->status |= TS_SAVED_FP | TS_RESTORE_FP;
 
 	sw->r26 = (unsigned long) ret_from_sys_call;
 
@@ -189,9 +190,9 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
 	err |= __get_user(usp, sc->sc_regs+30);
 	wrusp(usp);
 
-	for (i = 0; i < 31; i++)
-		err |= __get_user(sw->fp[i], sc->sc_fpregs+i);
-	err |= __get_user(sw->fp[31], &sc->sc_fpcr);
+	err |= __copy_from_user(current_thread_info()->fp,
+				sc->sc_fpregs, 31 * 8);
+	err |= __get_user(current_thread_info()->fp[31], &sc->sc_fpcr);
 
 	return err;
 }
@@ -219,7 +220,7 @@ do_sigreturn(struct sigcontext __user *sc)
 
 	/* Send SIGTRAP if we're single-stepping: */
 	if (ptrace_cancel_bpt (current)) {
-		send_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *) regs->pc, 0,
+		send_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *) regs->pc,
 			       current);
 	}
 	return;
@@ -247,7 +248,7 @@ do_rt_sigreturn(struct rt_sigframe __user *frame)
 
 	/* Send SIGTRAP if we're single-stepping: */
 	if (ptrace_cancel_bpt (current)) {
-		send_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *) regs->pc, 0,
+		send_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *) regs->pc,
 			       current);
 	}
 	return;
@@ -272,7 +273,7 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 		 unsigned long mask, unsigned long sp)
 {
 	struct switch_stack *sw = (struct switch_stack *)regs - 1;
-	long i, err = 0;
+	long err = 0;
 
 	err |= __put_user(on_sig_stack((unsigned long)sc), &sc->sc_onstack);
 	err |= __put_user(mask, &sc->sc_mask);
@@ -312,10 +313,10 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 	err |= __put_user(sp, sc->sc_regs+30);
 	err |= __put_user(0, sc->sc_regs+31);
 
-	for (i = 0; i < 31; i++)
-		err |= __put_user(sw->fp[i], sc->sc_fpregs+i);
+	err |= __copy_to_user(sc->sc_fpregs,
+			      current_thread_info()->fp, 31 * 8);
 	err |= __put_user(0, sc->sc_fpregs+31);
-	err |= __put_user(sw->fp[31], &sc->sc_fpcr);
+	err |= __put_user(current_thread_info()->fp[31], &sc->sc_fpcr);
 
 	err |= __put_user(regs->trap_a0, &sc->sc_traparg_a0);
 	err |= __put_user(regs->trap_a1, &sc->sc_traparg_a1);
@@ -528,13 +529,16 @@ do_work_pending(struct pt_regs *regs, unsigned long thread_flags,
 		} else {
 			local_irq_enable();
 			if (thread_flags & (_TIF_SIGPENDING|_TIF_NOTIFY_SIGNAL)) {
+				preempt_disable();
+				save_fpu();
+				preempt_enable();
 				do_signal(regs, r0, r19);
 				r0 = 0;
 			} else {
-				tracehook_notify_resume(regs);
+				resume_user_mode_work(regs);
 			}
 		}
 		local_irq_disable();
-		thread_flags = current_thread_info()->flags;
+		thread_flags = read_thread_flags();
 	} while (thread_flags & _TIF_WORK_MASK);
 }
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index f4dd9f3f3001..7439b2377df5 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -166,7 +166,6 @@ smp_callin(void)
 	DBGS(("smp_callin: commencing CPU %d current %p active_mm %p\n",
 	      cpuid, current, current->active_mm));
 
-	preempt_disable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
@@ -498,12 +497,6 @@ smp_cpus_done(unsigned int max_cpus)
 	       ((bogosum + 2500) / (5000/HZ)) % 100);
 }
 
-int
-setup_profiling_timer(unsigned int multiplier)
-{
-	return -EINVAL;
-}
-
 static void
 send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation)
 {
@@ -569,7 +562,7 @@ handle_ipi(struct pt_regs *regs)
 }
 
 void
-smp_send_reschedule(int cpu)
+arch_smp_send_reschedule(int cpu)
 {
 #ifdef DEBUG_IPI_MSG
 	if (cpu == hard_smp_processor_id())
@@ -583,7 +576,7 @@ void
 smp_send_stop(void)
 {
 	cpumask_t to_whom;
-	cpumask_copy(&to_whom, cpu_possible_mask);
+	cpumask_copy(&to_whom, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), &to_whom);
 #ifdef DEBUG_IPI_MSG
 	if (hard_smp_processor_id() != boot_cpu_id)
@@ -635,7 +628,7 @@ flush_tlb_all(void)
 static void
 ipi_flush_tlb_mm(void *x)
 {
-	struct mm_struct *mm = (struct mm_struct *) x;
+	struct mm_struct *mm = x;
 	if (mm == current->active_mm && !asn_locked())
 		flush_tlb_current(mm);
 	else
@@ -677,7 +670,7 @@ struct flush_tlb_page_struct {
 static void
 ipi_flush_tlb_page(void *x)
 {
-	struct flush_tlb_page_struct *data = (struct flush_tlb_page_struct *)x;
+	struct flush_tlb_page_struct *data = x;
 	struct mm_struct * mm = data->mm;
 
 	if (mm == current->active_mm && !asn_locked())
diff --git a/arch/alpha/kernel/srm_env.c b/arch/alpha/kernel/srm_env.c
index 528d2be58182..217b4dca51dd 100644
--- a/arch/alpha/kernel/srm_env.c
+++ b/arch/alpha/kernel/srm_env.c
@@ -83,14 +83,14 @@ static int srm_env_proc_show(struct seq_file *m, void *v)
 
 static int srm_env_proc_open(struct inode *inode, struct file *file)
 {
-	return single_open(file, srm_env_proc_show, PDE_DATA(inode));
+	return single_open(file, srm_env_proc_show, pde_data(inode));
 }
 
 static ssize_t srm_env_proc_write(struct file *file, const char __user *buffer,
 				  size_t count, loff_t *pos)
 {
 	int res;
-	unsigned long	id = (unsigned long)PDE_DATA(file_inode(file));
+	unsigned long	id = (unsigned long)pde_data(file_inode(file));
 	char		*buf = (char *) __get_free_page(GFP_USER);
 	unsigned long	ret1, ret2;
 
diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c
index 438b10c44d73..6dc952b0df4a 100644
--- a/arch/alpha/kernel/srmcons.c
+++ b/arch/alpha/kernel/srmcons.c
@@ -59,7 +59,7 @@ srmcons_do_receive_chars(struct tty_port *port)
 	} while((result.bits.status & 1) && (++loops < 10));
 
 	if (count)
-		tty_schedule_flip(port);
+		tty_flip_buffer_push(port);
 
 	return count;
 }
@@ -142,19 +142,13 @@ srmcons_write(struct tty_struct *tty,
 	return count;
 }
 
-static int
+static unsigned int
 srmcons_write_room(struct tty_struct *tty)
 {
 	return 512;
 }
 
 static int
-srmcons_chars_in_buffer(struct tty_struct *tty)
-{
-	return 0;
-}
-
-static int
 srmcons_open(struct tty_struct *tty, struct file *filp)
 {
 	struct srmcons_private *srmconsp = &srmcons_singleton;
@@ -200,7 +194,6 @@ static const struct tty_operations srmcons_ops = {
 	.close		= srmcons_close,
 	.write		= srmcons_write,
 	.write_room	= srmcons_write_room,
-	.chars_in_buffer= srmcons_chars_in_buffer,
 };
 
 static int __init
@@ -211,9 +204,9 @@ srmcons_init(void)
 		struct tty_driver *driver;
 		int err;
 
-		driver = alloc_tty_driver(MAX_SRM_CONSOLE_DEVICES);
-		if (!driver)
-			return -ENOMEM;
+		driver = tty_alloc_driver(MAX_SRM_CONSOLE_DEVICES, 0);
+		if (IS_ERR(driver))
+			return PTR_ERR(driver);
 
 		tty_port_init(&srmcons_singleton.port);
 
@@ -228,7 +221,7 @@ srmcons_init(void)
 		tty_port_link_device(&srmcons_singleton.port, driver, 0);
 		err = tty_register_driver(driver);
 		if (err) {
-			put_tty_driver(driver);
+			tty_driver_kref_put(driver);
 			tty_port_destroy(&srmcons_singleton.port);
 			return err;
 		}
diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c
index e5d870ff225f..5c9c88428124 100644
--- a/arch/alpha/kernel/sys_jensen.c
+++ b/arch/alpha/kernel/sys_jensen.c
@@ -7,6 +7,11 @@
  *
  * Code supporting the Jensen.
  */
+#define __EXTERN_INLINE
+#include <asm/io.h>
+#include <asm/jensen.h>
+#undef  __EXTERN_INLINE
+
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -17,11 +22,6 @@
 
 #include <asm/ptrace.h>
 
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/jensen.h>
-#undef  __EXTERN_INLINE
-
 #include <asm/dma.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c
index 83d6c53d6d4d..1f99b03effc2 100644
--- a/arch/alpha/kernel/sys_marvel.c
+++ b/arch/alpha/kernel/sys_marvel.c
@@ -461,10 +461,5 @@ struct alpha_machine_vector marvel_ev7_mv __initmv = {
 	.kill_arch		= marvel_kill_arch,
 	.pci_map_irq		= marvel_map_irq,
 	.pci_swizzle		= common_swizzle,
-
-	.pa_to_nid		= marvel_pa_to_nid,
-	.cpuid_to_nid		= marvel_cpuid_to_nid,
-	.node_mem_start		= marvel_node_mem_start,
-	.node_mem_size		= marvel_node_mem_size,
 };
 ALIAS_MV(marvel_ev7)
diff --git a/arch/alpha/kernel/sys_nautilus.c b/arch/alpha/kernel/sys_nautilus.c
index 53adf43dcd44..96fd6ff3fe81 100644
--- a/arch/alpha/kernel/sys_nautilus.c
+++ b/arch/alpha/kernel/sys_nautilus.c
@@ -212,7 +212,7 @@ nautilus_init_pci(void)
 
 	/* Use default IO. */
 	pci_add_resource(&bridge->windows, &ioport_resource);
-	/* Irongate PCI memory aperture, calculate requred size before
+	/* Irongate PCI memory aperture, calculate required size before
 	   setting it up. */
 	pci_add_resource(&bridge->windows, &irongate_mem);
 
diff --git a/arch/alpha/kernel/sys_wildfire.c b/arch/alpha/kernel/sys_wildfire.c
index 2c54d707142a..3cee05443f07 100644
--- a/arch/alpha/kernel/sys_wildfire.c
+++ b/arch/alpha/kernel/sys_wildfire.c
@@ -337,10 +337,5 @@ struct alpha_machine_vector wildfire_mv __initmv = {
 	.kill_arch		= wildfire_kill_arch,
 	.pci_map_irq		= wildfire_map_irq,
 	.pci_swizzle		= common_swizzle,
-
-	.pa_to_nid		= wildfire_pa_to_nid,
-	.cpuid_to_nid		= wildfire_cpuid_to_nid,
-	.node_mem_start		= wildfire_node_mem_start,
-	.node_mem_size		= wildfire_node_mem_size,
 };
 ALIAS_MV(wildfire)
diff --git a/arch/alpha/kernel/syscalls/Makefile b/arch/alpha/kernel/syscalls/Makefile
index 285aaba832d9..b265e4bc16c2 100644
--- a/arch/alpha/kernel/syscalls/Makefile
+++ b/arch/alpha/kernel/syscalls/Makefile
@@ -2,24 +2,17 @@
 kapi := arch/$(SRCARCH)/include/generated/asm
 uapi := arch/$(SRCARCH)/include/generated/uapi/asm
 
-_dummy := $(shell [ -d '$(uapi)' ] || mkdir -p '$(uapi)')	\
-	  $(shell [ -d '$(kapi)' ] || mkdir -p '$(kapi)')
+$(shell mkdir -p $(uapi) $(kapi))
 
 syscall := $(src)/syscall.tbl
-syshdr := $(srctree)/$(src)/syscallhdr.sh
-systbl := $(srctree)/$(src)/syscalltbl.sh
+syshdr := $(srctree)/scripts/syscallhdr.sh
+systbl := $(srctree)/scripts/syscalltbl.sh
 
 quiet_cmd_syshdr = SYSHDR  $@
-      cmd_syshdr = $(CONFIG_SHELL) '$(syshdr)' '$<' '$@'	\
-		   '$(syshdr_abis_$(basetarget))'		\
-		   '$(syshdr_pfx_$(basetarget))'		\
-		   '$(syshdr_offset_$(basetarget))'
+      cmd_syshdr = $(CONFIG_SHELL) $(syshdr) --emit-nr $< $@
 
 quiet_cmd_systbl = SYSTBL  $@
-      cmd_systbl = $(CONFIG_SHELL) '$(systbl)' '$<' '$@'	\
-		   '$(systbl_abis_$(basetarget))'		\
-		   '$(systbl_abi_$(basetarget))'		\
-		   '$(systbl_offset_$(basetarget))'
+      cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@
 
 $(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
 	$(call if_changed,syshdr)
diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl
index 02f0244e005c..8ebacf37a8cf 100644
--- a/arch/alpha/kernel/syscalls/syscall.tbl
+++ b/arch/alpha/kernel/syscalls/syscall.tbl
@@ -125,8 +125,8 @@
 116	common	osf_gettimeofday		sys_osf_gettimeofday
 117	common	osf_getrusage			sys_osf_getrusage
 118	common	getsockopt			sys_getsockopt
-120	common	readv				sys_osf_readv
-121	common	writev				sys_osf_writev
+120	common	readv				sys_readv
+121	common	writev				sys_writev
 122	common	osf_settimeofday		sys_osf_settimeofday
 123	common	fchown				sys_fchown
 124	common	fchmod				sys_fchmod
@@ -230,7 +230,7 @@
 259	common	osf_swapctl			sys_ni_syscall
 260	common	osf_memcntl			sys_ni_syscall
 261	common	osf_fdatasync			sys_ni_syscall
-300	common	bdflush				sys_bdflush
+300	common	bdflush				sys_ni_syscall
 301	common	sethae				sys_sethae
 302	common	mount				sys_mount
 303	common	old_adjtimex			sys_old_adjtimex
@@ -482,3 +482,11 @@
 550	common	process_madvise			sys_process_madvise
 551	common	epoll_pwait2			sys_epoll_pwait2
 552	common	mount_setattr			sys_mount_setattr
+553	common	quotactl_fd			sys_quotactl_fd
+554	common	landlock_create_ruleset		sys_landlock_create_ruleset
+555	common	landlock_add_rule		sys_landlock_add_rule
+556	common	landlock_restrict_self		sys_landlock_restrict_self
+# 557 reserved for memfd_secret
+558	common	process_mrelease		sys_process_mrelease
+559	common  futex_waitv                     sys_futex_waitv
+560	common	set_mempolicy_home_node		sys_ni_syscall
diff --git a/arch/alpha/kernel/syscalls/syscallhdr.sh b/arch/alpha/kernel/syscalls/syscallhdr.sh
deleted file mode 100644
index 1780e861492a..000000000000
--- a/arch/alpha/kernel/syscalls/syscallhdr.sh
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-prefix="$4"
-offset="$5"
-
-fileguard=_UAPI_ASM_ALPHA_`basename "$out" | sed \
-	-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \
-	-e 's/[^A-Z0-9_]/_/g' -e 's/__/_/g'`
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
-	printf "#ifndef %s\n" "${fileguard}"
-	printf "#define %s\n" "${fileguard}"
-	printf "\n"
-
-	nxt=0
-	while read nr abi name entry ; do
-		if [ -z "$offset" ]; then
-			printf "#define __NR_%s%s\t%s\n" \
-				"${prefix}" "${name}" "${nr}"
-		else
-			printf "#define __NR_%s%s\t(%s + %s)\n" \
-				"${prefix}" "${name}" "${offset}" "${nr}"
-		fi
-		nxt=$((nr+1))
-	done
-
-	printf "\n"
-	printf "#ifdef __KERNEL__\n"
-	printf "#define __NR_syscalls\t%s\n" "${nxt}"
-	printf "#endif\n"
-	printf "\n"
-	printf "#endif /* %s */\n" "${fileguard}"
-) > "$out"
diff --git a/arch/alpha/kernel/syscalls/syscalltbl.sh b/arch/alpha/kernel/syscalls/syscalltbl.sh
deleted file mode 100644
index 85d78d9309ad..000000000000
--- a/arch/alpha/kernel/syscalls/syscalltbl.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-my_abi="$4"
-offset="$5"
-
-emit() {
-	t_nxt="$1"
-	t_nr="$2"
-	t_entry="$3"
-
-	while [ $t_nxt -lt $t_nr ]; do
-		printf "__SYSCALL(%s, sys_ni_syscall, )\n" "${t_nxt}"
-		t_nxt=$((t_nxt+1))
-	done
-	printf "__SYSCALL(%s, %s, )\n" "${t_nxt}" "${t_entry}"
-}
-
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
-	nxt=0
-	if [ -z "$offset" ]; then
-		offset=0
-	fi
-
-	while read nr abi name entry ; do
-		emit $((nxt+offset)) $((nr+offset)) $entry
-		nxt=$((nr+1))
-	done
-) > "$out"
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index 9704f22ed5e3..68f3e4f329eb 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -7,10 +7,9 @@
 
 #include <asm/unistd.h>
 
-#define __SYSCALL(nr, entry, nargs) .quad entry
+#define __SYSCALL(nr, entry) .quad entry
 	.data
 	.align 3
 	.globl sys_call_table
 sys_call_table:
 #include <asm/syscall_table.h>
-#undef __SYSCALL
diff --git a/arch/alpha/kernel/termios.c b/arch/alpha/kernel/termios.c
new file mode 100644
index 000000000000..a4c29a22edf7
--- /dev/null
+++ b/arch/alpha/kernel/termios.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/termios_internal.h>
+
+int user_termio_to_kernel_termios(struct ktermios *termios,
+						struct termio __user *termio)
+{
+	struct termio v;
+	bool canon;
+
+	if (copy_from_user(&v, termio, sizeof(struct termio)))
+		return -EFAULT;
+
+	termios->c_iflag = (0xffff0000 & termios->c_iflag) | v.c_iflag;
+	termios->c_oflag = (0xffff0000 & termios->c_oflag) | v.c_oflag;
+	termios->c_cflag = (0xffff0000 & termios->c_cflag) | v.c_cflag;
+	termios->c_lflag = (0xffff0000 & termios->c_lflag) | v.c_lflag;
+	termios->c_line = (0xffff0000 & termios->c_lflag) | v.c_line;
+
+	canon = v.c_lflag & ICANON;
+	termios->c_cc[VINTR]  = v.c_cc[_VINTR];
+	termios->c_cc[VQUIT]  = v.c_cc[_VQUIT];
+	termios->c_cc[VERASE] = v.c_cc[_VERASE];
+	termios->c_cc[VKILL]  = v.c_cc[_VKILL];
+	termios->c_cc[VEOL2]  = v.c_cc[_VEOL2];
+	termios->c_cc[VSWTC]  = v.c_cc[_VSWTC];
+	termios->c_cc[canon ? VEOF : VMIN]  = v.c_cc[_VEOF];
+	termios->c_cc[canon ? VEOL : VTIME] = v.c_cc[_VEOL];
+
+	return 0;
+}
+
+int kernel_termios_to_user_termio(struct termio __user *termio,
+						struct ktermios *termios)
+{
+	struct termio v;
+	bool canon;
+
+	memset(&v, 0, sizeof(struct termio));
+	v.c_iflag = termios->c_iflag;
+	v.c_oflag = termios->c_oflag;
+	v.c_cflag = termios->c_cflag;
+	v.c_lflag = termios->c_lflag;
+	v.c_line = termios->c_line;
+
+	canon = v.c_lflag & ICANON;
+	v.c_cc[_VINTR]  = termios->c_cc[VINTR];
+	v.c_cc[_VQUIT]  = termios->c_cc[VQUIT];
+	v.c_cc[_VERASE] = termios->c_cc[VERASE];
+	v.c_cc[_VKILL]  = termios->c_cc[VKILL];
+	v.c_cc[_VEOF]   = termios->c_cc[canon ? VEOF : VMIN];
+	v.c_cc[_VEOL]   = termios->c_cc[canon ? VEOL : VTIME];
+	v.c_cc[_VEOL2]  = termios->c_cc[VEOL2];
+	v.c_cc[_VSWTC]  = termios->c_cc[VSWTC];
+
+	return copy_to_user(termio, &v, sizeof(struct termio));
+}
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index 921d4b6e4d95..d9a67b370e04 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -129,9 +129,7 @@ dik_show_trace(unsigned long *sp, const char *loglvl)
 		extern char _stext[], _etext[];
 		unsigned long tmp = *sp;
 		sp++;
-		if (tmp < (unsigned long) &_stext)
-			continue;
-		if (tmp >= (unsigned long) &_etext)
+		if (!is_kernel_text(tmp))
 			continue;
 		printk("%s[<%lx>] %pSR\n", loglvl, tmp, (void *)tmp);
 		if (i > 40) {
@@ -192,7 +190,7 @@ die_if_kernel(char * str, struct pt_regs *regs, long err, unsigned long *r9_15)
 		local_irq_enable();
 		while (1);
 	}
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 }
 
 #ifndef CONFIG_MATHEMU
@@ -227,7 +225,7 @@ do_entArith(unsigned long summary, unsigned long write_mask,
 	}
 	die_if_kernel("Arithmetic fault", regs, 0, NULL);
 
-	send_sig_fault(SIGFPE, si_code, (void __user *) regs->pc, 0, current);
+	send_sig_fault_trapno(SIGFPE, si_code, (void __user *) regs->pc, 0, current);
 }
 
 asmlinkage void
@@ -235,7 +233,21 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 {
 	int signo, code;
 
-	if ((regs->ps & ~IPL_MAX) == 0) {
+	if (type == 3) { /* FEN fault */
+		/* Irritating users can call PAL_clrfen to disable the
+		   FPU for the process.  The kernel will then trap in
+		   do_switch_stack and undo_switch_stack when we try
+		   to save and restore the FP registers.
+
+		   Given that GCC by default generates code that uses the
+		   FP registers, PAL_clrfen is not useful except for DoS
+		   attacks.  So turn the bleeding FPU back on and be done
+		   with it.  */
+		current_thread_info()->pcb.flags |= 1;
+		__reload_thread(&current_thread_info()->pcb);
+		return;
+	}
+	if (!user_mode(regs)) {
 		if (type == 1) {
 			const unsigned int *data
 			  = (const unsigned int *) regs->pc;
@@ -268,13 +280,13 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 			regs->pc -= 4;	/* make pc point to former bpt */
 		}
 
-		send_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)regs->pc, 0,
+		send_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)regs->pc,
 			       current);
 		return;
 
 	      case 1: /* bugcheck */
-		send_sig_fault(SIGTRAP, TRAP_UNK, (void __user *) regs->pc, 0,
-			       current);
+		send_sig_fault_trapno(SIGTRAP, TRAP_UNK,
+				      (void __user *) regs->pc, 0, current);
 		return;
 		
 	      case 2: /* gentrap */
@@ -335,8 +347,8 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 			break;
 		}
 
-		send_sig_fault(signo, code, (void __user *) regs->pc, regs->r16,
-			       current);
+		send_sig_fault_trapno(signo, code, (void __user *) regs->pc,
+				      regs->r16, current);
 		return;
 
 	      case 4: /* opDEC */
@@ -360,34 +372,20 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 			if (si_code == 0)
 				return;
 			if (si_code > 0) {
-				send_sig_fault(SIGFPE, si_code,
-					       (void __user *) regs->pc, 0,
-					       current);
+				send_sig_fault_trapno(SIGFPE, si_code,
+						      (void __user *) regs->pc,
+						      0, current);
 				return;
 			}
 		}
 		break;
 
-	      case 3: /* FEN fault */
-		/* Irritating users can call PAL_clrfen to disable the
-		   FPU for the process.  The kernel will then trap in
-		   do_switch_stack and undo_switch_stack when we try
-		   to save and restore the FP registers.
-
-		   Given that GCC by default generates code that uses the
-		   FP registers, PAL_clrfen is not useful except for DoS
-		   attacks.  So turn the bleeding FPU back on and be done
-		   with it.  */
-		current_thread_info()->pcb.flags |= 1;
-		__reload_thread(&current_thread_info()->pcb);
-		return;
-
 	      case 5: /* illoc */
 	      default: /* unexpected instruction-fault type */
 		      ;
 	}
 
-	send_sig_fault(SIGILL, ILL_ILLOPC, (void __user *)regs->pc, 0, current);
+	send_sig_fault(SIGILL, ILL_ILLOPC, (void __user *)regs->pc, current);
 }
 
 /* There is an ifdef in the PALcode in MILO that enables a 
@@ -402,7 +400,7 @@ do_entDbg(struct pt_regs *regs)
 {
 	die_if_kernel("Instruction fault", regs, 0, NULL);
 
-	force_sig_fault(SIGILL, ILL_ILLOPC, (void __user *)regs->pc, 0);
+	force_sig_fault(SIGILL, ILL_ILLOPC, (void __user *)regs->pc);
 }
 
 
@@ -577,7 +575,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
 
 	printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n",
 		pc, va, opcode, reg);
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 
 got_exception:
 	/* Ok, we caught the exception, but we don't want it.  Is there
@@ -632,7 +630,7 @@ got_exception:
 		local_irq_enable();
 		while (1);
 	}
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 }
 
 /*
@@ -730,7 +728,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
 	long error;
 
 	/* Check the UAC bits to decide what the user wants us to do
-	   with the unaliged access.  */
+	   with the unaligned access.  */
 
 	if (!(current_thread_info()->status & TS_UAC_NOPRINT)) {
 		if (__ratelimit(&ratelimit)) {
@@ -964,12 +962,12 @@ give_sigsegv:
 			si_code = SEGV_MAPERR;
 		mmap_read_unlock(mm);
 	}
-	send_sig_fault(SIGSEGV, si_code, va, 0, current);
+	send_sig_fault(SIGSEGV, si_code, va, current);
 	return;
 
 give_sigbus:
 	regs->pc -= 4;
-	send_sig_fault(SIGBUS, BUS_ADRALN, va, 0, current);
+	send_sig_fault(SIGBUS, BUS_ADRALN, va, current);
 	return;
 }
 
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index 5b78d640725d..2efa7dfc798a 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -27,7 +27,6 @@ SECTIONS
 		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
-		CPUIDLE_TEXT
 		LOCK_TEXT
 		*(.fixup)
 		*(.gnu.warning)
diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile
index 854d5e79979e..1cc74f7b50ef 100644
--- a/arch/alpha/lib/Makefile
+++ b/arch/alpha/lib/Makefile
@@ -14,6 +14,7 @@ ev6-$(CONFIG_ALPHA_EV6) := ev6-
 ev67-$(CONFIG_ALPHA_EV67) := ev67-
 
 lib-y =	__divqu.o __remqu.o __divlu.o __remlu.o \
+	udiv-qrnnd.o \
 	udelay.o \
 	$(ev6-y)memset.o \
 	$(ev6-y)memcpy.o \
diff --git a/arch/alpha/lib/csum_partial_copy.c b/arch/alpha/lib/csum_partial_copy.c
index dc68efbe9367..4d180d96f09e 100644
--- a/arch/alpha/lib/csum_partial_copy.c
+++ b/arch/alpha/lib/csum_partial_copy.c
@@ -13,6 +13,7 @@
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/uaccess.h>
+#include <net/checksum.h>
 
 
 #define ldq_u(x,y) \
@@ -352,7 +353,6 @@ csum_and_copy_from_user(const void __user *src, void *dst, int len)
 		return 0;
 	return __csum_and_copy(src, dst, len);
 }
-EXPORT_SYMBOL(csum_and_copy_from_user);
 
 __wsum
 csum_partial_copy_nocheck(const void *src, void *dst, int len)
diff --git a/arch/alpha/lib/fpreg.c b/arch/alpha/lib/fpreg.c
index 34fea465645b..7c08b225261c 100644
--- a/arch/alpha/lib/fpreg.c
+++ b/arch/alpha/lib/fpreg.c
@@ -7,6 +7,8 @@
 
 #include <linux/compiler.h>
 #include <linux/export.h>
+#include <linux/preempt.h>
+#include <asm/thread_info.h>
 
 #if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
 #define STT(reg,val)  asm volatile ("ftoit $f"#reg",%0" : "=r"(val));
@@ -19,7 +21,12 @@ alpha_read_fp_reg (unsigned long reg)
 {
 	unsigned long val;
 
-	switch (reg) {
+	if (unlikely(reg >= 32))
+		return 0;
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP)
+		val = current_thread_info()->fp[reg];
+	else switch (reg) {
 	      case  0: STT( 0, val); break;
 	      case  1: STT( 1, val); break;
 	      case  2: STT( 2, val); break;
@@ -52,8 +59,8 @@ alpha_read_fp_reg (unsigned long reg)
 	      case 29: STT(29, val); break;
 	      case 30: STT(30, val); break;
 	      case 31: STT(31, val); break;
-	      default: return 0;
 	}
+	preempt_enable();
 	return val;
 }
 EXPORT_SYMBOL(alpha_read_fp_reg);
@@ -67,7 +74,14 @@ EXPORT_SYMBOL(alpha_read_fp_reg);
 void
 alpha_write_fp_reg (unsigned long reg, unsigned long val)
 {
-	switch (reg) {
+	if (unlikely(reg >= 32))
+		return;
+
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		current_thread_info()->status |= TS_RESTORE_FP;
+		current_thread_info()->fp[reg] = val;
+	} else switch (reg) {
 	      case  0: LDT( 0, val); break;
 	      case  1: LDT( 1, val); break;
 	      case  2: LDT( 2, val); break;
@@ -101,6 +115,7 @@ alpha_write_fp_reg (unsigned long reg, unsigned long val)
 	      case 30: LDT(30, val); break;
 	      case 31: LDT(31, val); break;
 	}
+	preempt_enable();
 }
 EXPORT_SYMBOL(alpha_write_fp_reg);
 
@@ -115,7 +130,14 @@ alpha_read_fp_reg_s (unsigned long reg)
 {
 	unsigned long val;
 
-	switch (reg) {
+	if (unlikely(reg >= 32))
+		return 0;
+
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		LDT(0, current_thread_info()->fp[reg]);
+		STS(0, val);
+	} else switch (reg) {
 	      case  0: STS( 0, val); break;
 	      case  1: STS( 1, val); break;
 	      case  2: STS( 2, val); break;
@@ -148,8 +170,8 @@ alpha_read_fp_reg_s (unsigned long reg)
 	      case 29: STS(29, val); break;
 	      case 30: STS(30, val); break;
 	      case 31: STS(31, val); break;
-	      default: return 0;
 	}
+	preempt_enable();
 	return val;
 }
 EXPORT_SYMBOL(alpha_read_fp_reg_s);
@@ -163,7 +185,15 @@ EXPORT_SYMBOL(alpha_read_fp_reg_s);
 void
 alpha_write_fp_reg_s (unsigned long reg, unsigned long val)
 {
-	switch (reg) {
+	if (unlikely(reg >= 32))
+		return;
+
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		current_thread_info()->status |= TS_RESTORE_FP;
+		LDS(0, val);
+		STT(0, current_thread_info()->fp[reg]);
+	} else switch (reg) {
 	      case  0: LDS( 0, val); break;
 	      case  1: LDS( 1, val); break;
 	      case  2: LDS( 2, val); break;
@@ -197,5 +227,6 @@ alpha_write_fp_reg_s (unsigned long reg, unsigned long val)
 	      case 30: LDS(30, val); break;
 	      case 31: LDS(31, val); break;
 	}
+	preempt_enable();
 }
 EXPORT_SYMBOL(alpha_write_fp_reg_s);
diff --git a/arch/alpha/lib/stacktrace.c b/arch/alpha/lib/stacktrace.c
index 62454a7810e2..2b1176dd5174 100644
--- a/arch/alpha/lib/stacktrace.c
+++ b/arch/alpha/lib/stacktrace.c
@@ -92,7 +92,7 @@ stacktrace(void)
 {
 	instr * ret_pc;
 	instr * prologue = (instr *)stacktrace;
-	register unsigned char * sp __asm__ ("$30");
+	unsigned char *sp = (unsigned char *)current_stack_pointer;
 
 	printk("\tstack trace:\n");
 	do {
diff --git a/arch/alpha/lib/udiv-qrnnd.S b/arch/alpha/lib/udiv-qrnnd.S
new file mode 100644
index 000000000000..b887aa5428e5
--- /dev/null
+++ b/arch/alpha/lib/udiv-qrnnd.S
@@ -0,0 +1,165 @@
+ # Alpha 21064 __udiv_qrnnd
+ # Copyright (C) 1992, 1994, 1995, 2000 Free Software Foundation, Inc.
+
+ # This file is part of GCC.
+
+ # The GNU MP Library is free software; you can redistribute it and/or modify
+ # it under the terms of the GNU General Public License as published by
+ # the Free Software Foundation; either version 2 of the License, or (at your
+ # option) any later version.
+
+ # In addition to the permissions in the GNU General Public License, the
+ # Free Software Foundation gives you unlimited permission to link the
+ # compiled version of this file with other programs, and to distribute
+ # those programs without any restriction coming from the use of this
+ # file.  (The General Public License restrictions do apply in other
+ # respects; for example, they cover modification of the file, and
+ # distribution when not linked into another program.)
+
+ # This file is distributed in the hope that it will be useful, but
+ # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ # or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Library General Public
+ # License for more details.
+
+ # You should have received a copy of the GNU General Public License
+ # along with GCC; see the file COPYING.  If not, write to the 
+ # Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ # MA 02111-1307, USA.
+#include <asm/export.h>
+
+        .set noreorder
+        .set noat
+
+	.text
+
+	.globl __udiv_qrnnd
+	.ent __udiv_qrnnd
+__udiv_qrnnd:
+	.frame $30,0,$26,0
+	.prologue 0
+
+#define cnt	$2
+#define tmp	$3
+#define rem_ptr	$16
+#define n1	$17
+#define n0	$18
+#define d	$19
+#define qb	$20
+#define AT	$at
+
+	ldiq	cnt,16
+	blt	d,$largedivisor
+
+$loop1:	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	d,n1,qb
+	subq	n1,d,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	d,n1,qb
+	subq	n1,d,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	d,n1,qb
+	subq	n1,d,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	d,n1,qb
+	subq	n1,d,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	subq	cnt,1,cnt
+	bgt	cnt,$loop1
+	stq	n1,0(rem_ptr)
+	bis	$31,n0,$0
+	ret	$31,($26),1
+
+$largedivisor:
+	and	n0,1,$4
+
+	srl	n0,1,n0
+	sll	n1,63,tmp
+	or	tmp,n0,n0
+	srl	n1,1,n1
+
+	and	d,1,$6
+	srl	d,1,$5
+	addq	$5,$6,$5
+
+$loop2:	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	$5,n1,qb
+	subq	n1,$5,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	$5,n1,qb
+	subq	n1,$5,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	$5,n1,qb
+	subq	n1,$5,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	$5,n1,qb
+	subq	n1,$5,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	subq	cnt,1,cnt
+	bgt	cnt,$loop2
+
+	addq	n1,n1,n1
+	addq	$4,n1,n1
+	bne	$6,$Odd
+	stq	n1,0(rem_ptr)
+	bis	$31,n0,$0
+	ret	$31,($26),1
+
+$Odd:
+	/* q' in n0. r' in n1 */
+	addq	n1,n0,n1
+
+	cmpult	n1,n0,tmp	# tmp := carry from addq
+	subq	n1,d,AT
+	addq	n0,tmp,n0
+	cmovne	tmp,AT,n1
+
+	cmpult	n1,d,tmp
+	addq	n0,1,AT
+	cmoveq	tmp,AT,n0
+	subq	n1,d,AT
+	cmoveq	tmp,AT,n1
+
+	stq	n1,0(rem_ptr)
+	bis	$31,n0,$0
+	ret	$31,($26),1
+
+	.end	__udiv_qrnnd
+EXPORT_SYMBOL(__udiv_qrnnd)
diff --git a/arch/alpha/math-emu/Makefile b/arch/alpha/math-emu/Makefile
index 6eda0973e183..3206402a8792 100644
--- a/arch/alpha/math-emu/Makefile
+++ b/arch/alpha/math-emu/Makefile
@@ -7,4 +7,4 @@ ccflags-y := -w
 
 obj-$(CONFIG_MATHEMU) += math-emu.o
 
-math-emu-objs := math.o qrnnd.o
+math-emu-objs := math.o
diff --git a/arch/alpha/math-emu/math.c b/arch/alpha/math-emu/math.c
index d568cd9a3e43..4212258f3cfd 100644
--- a/arch/alpha/math-emu/math.c
+++ b/arch/alpha/math-emu/math.c
@@ -65,7 +65,7 @@ static long (*save_emul) (unsigned long pc);
 long do_alpha_fp_emul_imprecise(struct pt_regs *, unsigned long);
 long do_alpha_fp_emul(unsigned long);
 
-int init_module(void)
+static int alpha_fp_emul_init_module(void)
 {
 	save_emul_imprecise = alpha_fp_emul_imprecise;
 	save_emul = alpha_fp_emul;
@@ -73,12 +73,14 @@ int init_module(void)
 	alpha_fp_emul = do_alpha_fp_emul;
 	return 0;
 }
+module_init(alpha_fp_emul_init_module);
 
-void cleanup_module(void)
+static void alpha_fp_emul_cleanup_module(void)
 {
 	alpha_fp_emul_imprecise = save_emul_imprecise;
 	alpha_fp_emul = save_emul;
 }
+module_exit(alpha_fp_emul_cleanup_module);
 
 #undef  alpha_fp_emul_imprecise
 #define alpha_fp_emul_imprecise		do_alpha_fp_emul_imprecise
diff --git a/arch/alpha/math-emu/qrnnd.S b/arch/alpha/math-emu/qrnnd.S
deleted file mode 100644
index d6373ec1bff9..000000000000
--- a/arch/alpha/math-emu/qrnnd.S
+++ /dev/null
@@ -1,163 +0,0 @@
- # Alpha 21064 __udiv_qrnnd
- # Copyright (C) 1992, 1994, 1995, 2000 Free Software Foundation, Inc.
-
- # This file is part of GCC.
-
- # The GNU MP Library is free software; you can redistribute it and/or modify
- # it under the terms of the GNU General Public License as published by
- # the Free Software Foundation; either version 2 of the License, or (at your
- # option) any later version.
-
- # In addition to the permissions in the GNU General Public License, the
- # Free Software Foundation gives you unlimited permission to link the
- # compiled version of this file with other programs, and to distribute
- # those programs without any restriction coming from the use of this
- # file.  (The General Public License restrictions do apply in other
- # respects; for example, they cover modification of the file, and
- # distribution when not linked into another program.)
-
- # This file is distributed in the hope that it will be useful, but
- # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- # or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Library General Public
- # License for more details.
-
- # You should have received a copy of the GNU General Public License
- # along with GCC; see the file COPYING.  If not, write to the 
- # Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- # MA 02111-1307, USA.
-
-        .set noreorder
-        .set noat
-
-	.text
-
-	.globl __udiv_qrnnd
-	.ent __udiv_qrnnd
-__udiv_qrnnd:
-	.frame $30,0,$26,0
-	.prologue 0
-
-#define cnt	$2
-#define tmp	$3
-#define rem_ptr	$16
-#define n1	$17
-#define n0	$18
-#define d	$19
-#define qb	$20
-#define AT	$at
-
-	ldiq	cnt,16
-	blt	d,$largedivisor
-
-$loop1:	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	d,n1,qb
-	subq	n1,d,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	d,n1,qb
-	subq	n1,d,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	d,n1,qb
-	subq	n1,d,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	d,n1,qb
-	subq	n1,d,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	subq	cnt,1,cnt
-	bgt	cnt,$loop1
-	stq	n1,0(rem_ptr)
-	bis	$31,n0,$0
-	ret	$31,($26),1
-
-$largedivisor:
-	and	n0,1,$4
-
-	srl	n0,1,n0
-	sll	n1,63,tmp
-	or	tmp,n0,n0
-	srl	n1,1,n1
-
-	and	d,1,$6
-	srl	d,1,$5
-	addq	$5,$6,$5
-
-$loop2:	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	$5,n1,qb
-	subq	n1,$5,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	$5,n1,qb
-	subq	n1,$5,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	$5,n1,qb
-	subq	n1,$5,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	$5,n1,qb
-	subq	n1,$5,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	subq	cnt,1,cnt
-	bgt	cnt,$loop2
-
-	addq	n1,n1,n1
-	addq	$4,n1,n1
-	bne	$6,$Odd
-	stq	n1,0(rem_ptr)
-	bis	$31,n0,$0
-	ret	$31,($26),1
-
-$Odd:
-	/* q' in n0. r' in n1 */
-	addq	n1,n0,n1
-
-	cmpult	n1,n0,tmp	# tmp := carry from addq
-	subq	n1,d,AT
-	addq	n0,tmp,n0
-	cmovne	tmp,AT,n1
-
-	cmpult	n1,d,tmp
-	addq	n0,1,AT
-	cmoveq	tmp,AT,n0
-	subq	n1,d,AT
-	cmoveq	tmp,AT,n1
-
-	stq	n1,0(rem_ptr)
-	bis	$31,n0,$0
-	ret	$31,($26),1
-
-	.end	__udiv_qrnnd
diff --git a/arch/alpha/mm/Makefile b/arch/alpha/mm/Makefile
index 08ac6612edad..bd770302eb82 100644
--- a/arch/alpha/mm/Makefile
+++ b/arch/alpha/mm/Makefile
@@ -6,5 +6,3 @@
 ccflags-y := -Werror
 
 obj-y	:= init.o fault.o
-
-obj-$(CONFIG_DISCONTIGMEM) += numa.o
diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c
index 09172f017efc..7b01ae4f3bc6 100644
--- a/arch/alpha/mm/fault.c
+++ b/arch/alpha/mm/fault.c
@@ -152,7 +152,14 @@ retry:
 	   the fault.  */
 	fault = handle_mm_fault(vma, address, flags, regs);
 
-	if (fault_signal_pending(fault, regs))
+	if (fault_signal_pending(fault, regs)) {
+		if (!user_mode(regs))
+			goto no_context;
+		return;
+	}
+
+	/* The fault is fully completed (including releasing mmap lock) */
+	if (fault & VM_FAULT_COMPLETED)
 		return;
 
 	if (unlikely(fault & VM_FAULT_ERROR)) {
@@ -165,17 +172,15 @@ retry:
 		BUG();
 	}
 
-	if (flags & FAULT_FLAG_ALLOW_RETRY) {
-		if (fault & VM_FAULT_RETRY) {
-			flags |= FAULT_FLAG_TRIED;
+	if (fault & VM_FAULT_RETRY) {
+		flags |= FAULT_FLAG_TRIED;
 
-			 /* No need to mmap_read_unlock(mm) as we would
-			 * have already released it in __lock_page_or_retry
-			 * in mm/filemap.c.
-			 */
+		/* No need to mmap_read_unlock(mm) as we would
+		 * have already released it in __lock_page_or_retry
+		 * in mm/filemap.c.
+		 */
 
-			goto retry;
-		}
+		goto retry;
 	}
 
 	mmap_read_unlock(mm);
@@ -204,7 +209,7 @@ retry:
 	printk(KERN_ALERT "Unable to handle kernel paging request at "
 	       "virtual address %016lx\n", address);
 	die_if_kernel("Oops", regs, cause, (unsigned long*)regs - 16);
-	do_exit(SIGKILL);
+	make_task_dead(SIGKILL);
 
 	/* We ran out of memory, or some other thing happened to us that
 	   made us unable to handle the page fault gracefully.  */
@@ -219,13 +224,13 @@ retry:
 	mmap_read_unlock(mm);
 	/* Send a sigbus, regardless of whether we were in kernel
 	   or user mode.  */
-	force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *) address, 0);
+	force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *) address);
 	if (!user_mode(regs))
 		goto no_context;
 	return;
 
  do_sigsegv:
-	force_sig_fault(SIGSEGV, si_code, (void __user *) address, 0);
+	force_sig_fault(SIGSEGV, si_code, (void __user *) address);
 	return;
 
 #ifdef CONFIG_ALPHA_LARGE_VMALLOC
diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index 3c42b3147fd6..a155180d7a83 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -76,14 +76,14 @@ pgd_alloc(struct mm_struct *mm)
 pmd_t *
 __bad_pagetable(void)
 {
-	memset((void *) EMPTY_PGT, 0, PAGE_SIZE);
+	memset(absolute_pointer(EMPTY_PGT), 0, PAGE_SIZE);
 	return (pmd_t *) EMPTY_PGT;
 }
 
 pte_t
 __bad_page(void)
 {
-	memset((void *) EMPTY_PGE, 0, PAGE_SIZE);
+	memset(absolute_pointer(EMPTY_PGE), 0, PAGE_SIZE);
 	return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED));
 }
 
@@ -235,8 +235,6 @@ callback_init(void * kernel_end)
 	return kernel_end;
 }
 
-
-#ifndef CONFIG_DISCONTIGMEM
 /*
  * paging_init() sets up the memory map.
  */
@@ -255,9 +253,8 @@ void __init paging_init(void)
 	free_area_init(max_zone_pfn);
 
 	/* Initialize the kernel's ZERO_PGE. */
-	memset((void *)ZERO_PGE, 0, PAGE_SIZE);
+	memset(absolute_pointer(ZERO_PGE), 0, PAGE_SIZE);
 }
-#endif /* CONFIG_DISCONTIGMEM */
 
 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SRM)
 void
@@ -282,5 +279,26 @@ mem_init(void)
 	set_max_mapnr(max_low_pfn);
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
 	memblock_free_all();
-	mem_init_print_info(NULL);
 }
+
+static const pgprot_t protection_map[16] = {
+	[VM_NONE]					= _PAGE_P(_PAGE_FOE | _PAGE_FOW |
+								  _PAGE_FOR),
+	[VM_READ]					= _PAGE_P(_PAGE_FOE | _PAGE_FOW),
+	[VM_WRITE]					= _PAGE_P(_PAGE_FOE),
+	[VM_WRITE | VM_READ]				= _PAGE_P(_PAGE_FOE),
+	[VM_EXEC]					= _PAGE_P(_PAGE_FOW | _PAGE_FOR),
+	[VM_EXEC | VM_READ]				= _PAGE_P(_PAGE_FOW),
+	[VM_EXEC | VM_WRITE]				= _PAGE_P(0),
+	[VM_EXEC | VM_WRITE | VM_READ]			= _PAGE_P(0),
+	[VM_SHARED]					= _PAGE_S(_PAGE_FOE | _PAGE_FOW |
+								  _PAGE_FOR),
+	[VM_SHARED | VM_READ]				= _PAGE_S(_PAGE_FOE | _PAGE_FOW),
+	[VM_SHARED | VM_WRITE]				= _PAGE_S(_PAGE_FOE),
+	[VM_SHARED | VM_WRITE | VM_READ]		= _PAGE_S(_PAGE_FOE),
+	[VM_SHARED | VM_EXEC]				= _PAGE_S(_PAGE_FOW | _PAGE_FOR),
+	[VM_SHARED | VM_EXEC | VM_READ]			= _PAGE_S(_PAGE_FOW),
+	[VM_SHARED | VM_EXEC | VM_WRITE]		= _PAGE_S(0),
+	[VM_SHARED | VM_EXEC | VM_WRITE | VM_READ]	= _PAGE_S(0)
+};
+DECLARE_VM_GET_PAGE_PROT
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
deleted file mode 100644
index 0636e254a22f..000000000000
--- a/arch/alpha/mm/numa.c
+++ /dev/null
@@ -1,223 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *  linux/arch/alpha/mm/numa.c
- *
- *  DISCONTIGMEM NUMA alpha support.
- *
- *  Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/memblock.h>
-#include <linux/swap.h>
-#include <linux/initrd.h>
-#include <linux/pfn.h>
-#include <linux/module.h>
-
-#include <asm/hwrpb.h>
-#include <asm/sections.h>
-
-pg_data_t node_data[MAX_NUMNODES];
-EXPORT_SYMBOL(node_data);
-
-#undef DEBUG_DISCONTIG
-#ifdef DEBUG_DISCONTIG
-#define DBGDCONT(args...) printk(args)
-#else
-#define DBGDCONT(args...)
-#endif
-
-#define for_each_mem_cluster(memdesc, _cluster, i)		\
-	for ((_cluster) = (memdesc)->cluster, (i) = 0;		\
-	     (i) < (memdesc)->numclusters; (i)++, (_cluster)++)
-
-static void __init show_mem_layout(void)
-{
-	struct memclust_struct * cluster;
-	struct memdesc_struct * memdesc;
-	int i;
-
-	/* Find free clusters, and init and free the bootmem accordingly.  */
-	memdesc = (struct memdesc_struct *)
-	  (hwrpb->mddt_offset + (unsigned long) hwrpb);
-
-	printk("Raw memory layout:\n");
-	for_each_mem_cluster(memdesc, cluster, i) {
-		printk(" memcluster %2d, usage %1lx, start %8lu, end %8lu\n",
-		       i, cluster->usage, cluster->start_pfn,
-		       cluster->start_pfn + cluster->numpages);
-	}
-}
-
-static void __init
-setup_memory_node(int nid, void *kernel_end)
-{
-	extern unsigned long mem_size_limit;
-	struct memclust_struct * cluster;
-	struct memdesc_struct * memdesc;
-	unsigned long start_kernel_pfn, end_kernel_pfn;
-	unsigned long start, end;
-	unsigned long node_pfn_start, node_pfn_end;
-	unsigned long node_min_pfn, node_max_pfn;
-	int i;
-	int show_init = 0;
-
-	/* Find the bounds of current node */
-	node_pfn_start = (node_mem_start(nid)) >> PAGE_SHIFT;
-	node_pfn_end = node_pfn_start + (node_mem_size(nid) >> PAGE_SHIFT);
-	
-	/* Find free clusters, and init and free the bootmem accordingly.  */
-	memdesc = (struct memdesc_struct *)
-	  (hwrpb->mddt_offset + (unsigned long) hwrpb);
-
-	/* find the bounds of this node (node_min_pfn/node_max_pfn) */
-	node_min_pfn = ~0UL;
-	node_max_pfn = 0UL;
-	for_each_mem_cluster(memdesc, cluster, i) {
-		/* Bit 0 is console/PALcode reserved.  Bit 1 is
-		   non-volatile memory -- we might want to mark
-		   this for later.  */
-		if (cluster->usage & 3)
-			continue;
-
-		start = cluster->start_pfn;
-		end = start + cluster->numpages;
-
-		if (start >= node_pfn_end || end <= node_pfn_start)
-			continue;
-
-		if (!show_init) {
-			show_init = 1;
-			printk("Initializing bootmem allocator on Node ID %d\n", nid);
-		}
-		printk(" memcluster %2d, usage %1lx, start %8lu, end %8lu\n",
-		       i, cluster->usage, cluster->start_pfn,
-		       cluster->start_pfn + cluster->numpages);
-
-		if (start < node_pfn_start)
-			start = node_pfn_start;
-		if (end > node_pfn_end)
-			end = node_pfn_end;
-
-		if (start < node_min_pfn)
-			node_min_pfn = start;
-		if (end > node_max_pfn)
-			node_max_pfn = end;
-	}
-
-	if (mem_size_limit && node_max_pfn > mem_size_limit) {
-		static int msg_shown = 0;
-		if (!msg_shown) {
-			msg_shown = 1;
-			printk("setup: forcing memory size to %ldK (from %ldK).\n",
-			       mem_size_limit << (PAGE_SHIFT - 10),
-			       node_max_pfn    << (PAGE_SHIFT - 10));
-		}
-		node_max_pfn = mem_size_limit;
-	}
-
-	if (node_min_pfn >= node_max_pfn)
-		return;
-
-	/* Update global {min,max}_low_pfn from node information. */
-	if (node_min_pfn < min_low_pfn)
-		min_low_pfn = node_min_pfn;
-	if (node_max_pfn > max_low_pfn)
-		max_pfn = max_low_pfn = node_max_pfn;
-
-#if 0 /* we'll try this one again in a little while */
-	/* Cute trick to make sure our local node data is on local memory */
-	node_data[nid] = (pg_data_t *)(__va(node_min_pfn << PAGE_SHIFT));
-#endif
-	printk(" Detected node memory:   start %8lu, end %8lu\n",
-	       node_min_pfn, node_max_pfn);
-
-	DBGDCONT(" DISCONTIG: node_data[%d]   is at 0x%p\n", nid, NODE_DATA(nid));
-
-	/* Find the bounds of kernel memory.  */
-	start_kernel_pfn = PFN_DOWN(KERNEL_START_PHYS);
-	end_kernel_pfn = PFN_UP(virt_to_phys(kernel_end));
-
-	if (!nid && (node_max_pfn < end_kernel_pfn || node_min_pfn > start_kernel_pfn))
-		panic("kernel loaded out of ram");
-
-	memblock_add_node(PFN_PHYS(node_min_pfn),
-			  (node_max_pfn - node_min_pfn) << PAGE_SHIFT, nid);
-
-	/* Zone start phys-addr must be 2^(MAX_ORDER-1) aligned.
-	   Note that we round this down, not up - node memory
-	   has much larger alignment than 8Mb, so it's safe. */
-	node_min_pfn &= ~((1UL << (MAX_ORDER-1))-1);
-
-	NODE_DATA(nid)->node_start_pfn = node_min_pfn;
-	NODE_DATA(nid)->node_present_pages = node_max_pfn - node_min_pfn;
-
-	node_set_online(nid);
-}
-
-void __init
-setup_memory(void *kernel_end)
-{
-	unsigned long kernel_size;
-	int nid;
-
-	show_mem_layout();
-
-	nodes_clear(node_online_map);
-
-	min_low_pfn = ~0UL;
-	max_low_pfn = 0UL;
-	for (nid = 0; nid < MAX_NUMNODES; nid++)
-		setup_memory_node(nid, kernel_end);
-
-	kernel_size = virt_to_phys(kernel_end) - KERNEL_START_PHYS;
-	memblock_reserve(KERNEL_START_PHYS, kernel_size);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	initrd_start = INITRD_START;
-	if (initrd_start) {
-		extern void *move_initrd(unsigned long);
-
-		initrd_end = initrd_start+INITRD_SIZE;
-		printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
-		       (void *) initrd_start, INITRD_SIZE);
-
-		if ((void *)initrd_end > phys_to_virt(PFN_PHYS(max_low_pfn))) {
-			if (!move_initrd(PFN_PHYS(max_low_pfn)))
-				printk("initrd extends beyond end of memory "
-				       "(0x%08lx > 0x%p)\ndisabling initrd\n",
-				       initrd_end,
-				       phys_to_virt(PFN_PHYS(max_low_pfn)));
-		} else {
-			nid = kvaddr_to_nid(initrd_start);
-			memblock_reserve(virt_to_phys((void *)initrd_start),
-					 INITRD_SIZE);
-		}
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-}
-
-void __init paging_init(void)
-{
-	unsigned long   max_zone_pfn[MAX_NR_ZONES] = {0, };
-	unsigned long	dma_local_pfn;
-
-	/*
-	 * The old global MAX_DMA_ADDRESS per-arch API doesn't fit
-	 * in the NUMA model, for now we convert it to a pfn and
-	 * we interpret this pfn as a local per-node information.
-	 * This issue isn't very important since none of these machines
-	 * have legacy ISA slots anyways.
-	 */
-	dma_local_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-
-	max_zone_pfn[ZONE_DMA] = dma_local_pfn;
-	max_zone_pfn[ZONE_NORMAL] = max_pfn;
-
-	free_area_init(max_zone_pfn);
-
-	/* Initialize the kernel's ZERO_PGE. */
-	memset((void *)ZERO_PGE, 0, PAGE_SIZE);
-}
diff --git a/arch/arc/Kbuild b/arch/arc/Kbuild
index 699d8cae9b1f..b94102fff68b 100644
--- a/arch/arc/Kbuild
+++ b/arch/arc/Kbuild
@@ -1,3 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y += kernel/
 obj-y += mm/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index bc8d6aecfbbd..ab6d701365bb 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -6,6 +6,7 @@
 config ARC
 	def_bool y
 	select ARC_TIMERS
+	select ARCH_HAS_CACHE_LINE_SIZE
 	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DMA_PREP_COHERENT
 	select ARCH_HAS_PTE_SPECIAL
@@ -19,7 +20,6 @@ config ARC
 	select COMMON_CLK
 	select DMA_DIRECT_REMAP
 	select GENERIC_ATOMIC64 if !ISA_ARCV2 || !(ARC_HAS_LL64 && ARC_HAS_LLSC)
-	select GENERIC_FIND_FIRST_BIT
 	# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
@@ -28,17 +28,18 @@ config ARC
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARC_MMU_V4
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_DEBUG_KMEMLEAK
-	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_IOREMAP_PROT
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZMA
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
+	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_PERF_EVENTS
-	select HANDLE_DOMAIN_IRQ
+	select HAVE_SYSCALL_TRACEPOINTS
 	select IRQ_DOMAIN
 	select MODULES_USE_ELF_RELA
 	select OF
@@ -46,13 +47,7 @@ config ARC
 	select PCI_SYSCALL if PCI
 	select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING
 	select HAVE_ARCH_JUMP_LABEL if ISA_ARCV2 && !CPU_ENDIAN_BE32
-	select SET_FS
-
-config ARCH_HAS_CACHE_LINE_SIZE
-	def_bool y
-
-config TRACE_IRQFLAGS_SUPPORT
-	def_bool y
+	select TRACE_IRQFLAGS_SUPPORT
 
 config LOCKDEP_SUPPORT
 	def_bool y
@@ -63,10 +58,6 @@ config SCHED_OMIT_FRAME_POINTER
 config GENERIC_CSUM
 	def_bool y
 
-config ARCH_DISCONTIGMEM_ENABLE
-	def_bool n
-	depends on BROKEN
-
 config ARCH_FLATMEM_ENABLE
 	def_bool y
 
@@ -86,10 +77,6 @@ config STACKTRACE_SUPPORT
 	def_bool y
 	select STACKTRACE
 
-config HAVE_ARCH_TRANSPARENT_HUGEPAGE
-	def_bool y
-	depends on ARC_MMU_V4
-
 menu "ARC Architecture Configuration"
 
 menu "ARC Platform/SoC/Board"
@@ -125,16 +112,9 @@ choice
 	default ARC_CPU_770 if ISA_ARCOMPACT
 	default ARC_CPU_HS if ISA_ARCV2
 
-if ISA_ARCOMPACT
-
-config ARC_CPU_750D
-	bool "ARC750D"
-	select ARC_CANT_LLSC
-	help
-	  Support for ARC750 core
-
 config ARC_CPU_770
 	bool "ARC770"
+	depends on ISA_ARCOMPACT
 	select ARC_HAS_SWAPE
 	help
 	  Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
@@ -144,8 +124,6 @@ config ARC_CPU_770
 	  -Caches: New Prog Model, Region Flush
 	  -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
 
-endif #ISA_ARCOMPACT
-
 config ARC_CPU_HS
 	bool "ARC-HS"
 	depends on ISA_ARCV2
@@ -283,33 +261,17 @@ config ARC_DCCM_BASE
 
 choice
 	prompt "MMU Version"
-	default ARC_MMU_V3 if ARC_CPU_770
-	default ARC_MMU_V2 if ARC_CPU_750D
-	default ARC_MMU_V4 if ARC_CPU_HS
-
-if ISA_ARCOMPACT
-
-config ARC_MMU_V1
-	bool "MMU v1"
-	help
-	  Orig ARC700 MMU
-
-config ARC_MMU_V2
-	bool "MMU v2"
-	help
-	  Fixed the deficiency of v1 - possible thrashing in memcpy scenario
-	  when 2 D-TLB and 1 I-TLB entries index into same 2way set.
+	default ARC_MMU_V3 if ISA_ARCOMPACT
+	default ARC_MMU_V4 if ISA_ARCV2
 
 config ARC_MMU_V3
 	bool "MMU v3"
-	depends on ARC_CPU_770
+	depends on ISA_ARCOMPACT
 	help
 	  Introduced with ARC700 4.10: New Features
 	  Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
 	  Shared Address Spaces (SASID)
 
-endif
-
 config ARC_MMU_V4
 	bool "MMU v4"
 	depends on ISA_ARCV2
@@ -328,7 +290,6 @@ config ARC_PAGE_SIZE_8K
 
 config ARC_PAGE_SIZE_16K
 	bool "16KB"
-	depends on ARC_MMU_V3 || ARC_MMU_V4
 
 config ARC_PAGE_SIZE_4K
 	bool "4KB"
@@ -349,14 +310,9 @@ config ARC_HUGEPAGE_16M
 
 endchoice
 
-config NODES_SHIFT
-	int "Maximum NUMA Nodes (as a power of 2)"
-	default "0" if !DISCONTIGMEM
-	default "1" if DISCONTIGMEM
-	depends on NEED_MULTIPLE_NODES
-	help
-	  Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory
-	  zones.
+config PGTABLE_LEVELS
+	int "Number of Page table levels"
+	default 2
 
 config ARC_COMPACT_IRQ_LEVELS
 	depends on ISA_ARCOMPACT
@@ -427,7 +383,7 @@ choice
 	help
 	  Depending on the configuration, CPU can contain DSP registers
 	  (ACC0_GLO, ACC0_GHI, DSP_BFLY0, DSP_CTRL, DSP_FFT_CTRL).
-	  Bellow is options describing how to handle these registers in
+	  Below are options describing how to handle these registers in
 	  interrupt entry / exit and in context switch.
 
 config ARC_DSP_NONE
@@ -581,9 +537,6 @@ config ARC_DW2_UNWIND
 	  If you don't debug the kernel, you can say N, but we may not be able
 	  to solve problems without frame unwind information
 
-config ARC_DBG_TLB_PARANOIA
-	bool "Paranoia Checks in Low Level TLB Handlers"
-
 config ARC_DBG_JUMP_LABEL
 	bool "Paranoid checks in Static Keys (jump labels) code"
 	depends on JUMP_LABEL
@@ -601,9 +554,9 @@ config ARC_BUILTIN_DTB_NAME
 
 endmenu	 # "ARC Architecture Configuration"
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
-	default "12" if ARC_HUGEPAGE_16M
-	default "11"
+	default "11" if ARC_HUGEPAGE_16M
+	default "10"
 
 source "kernel/power/Kconfig"
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index 4392c9c189c4..329400a1c355 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -14,12 +14,11 @@ cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
 tune-mcpu-def-$(CONFIG_ISA_ARCOMPACT)	:= -mcpu=arc700
 tune-mcpu-def-$(CONFIG_ISA_ARCV2)	:= -mcpu=hs38
 
-ifeq ($(CONFIG_ARC_TUNE_MCPU),"")
+ifeq ($(CONFIG_ARC_TUNE_MCPU),)
 cflags-y				+= $(tune-mcpu-def-y)
 else
-tune-mcpu				:= $(shell echo $(CONFIG_ARC_TUNE_MCPU))
-tune-mcpu-ok 				:= $(call cc-option-yn, $(tune-mcpu))
-ifeq ($(tune-mcpu-ok),y)
+tune-mcpu				:= $(CONFIG_ARC_TUNE_MCPU)
+ifneq ($(call cc-option,$(tune-mcpu)),)
 cflags-y				+= $(tune-mcpu)
 else
 # The flag provided by 'CONFIG_ARC_TUNE_MCPU' option isn't known by this compiler
@@ -31,7 +30,7 @@ endif
 
 
 ifdef CONFIG_ARC_CURR_IN_REG
-# For a global register defintion, make sure it gets passed to every file
+# For a global register definition, make sure it gets passed to every file
 # We had a customer reported bug where some code built in kernel was NOT using
 # any kernel headers, and missing the r25 global register
 # Can't do unconditionally because of recursive include issues
@@ -83,11 +82,6 @@ KBUILD_CFLAGS	+= $(cflags-y)
 KBUILD_AFLAGS	+= $(KBUILD_CFLAGS)
 KBUILD_LDFLAGS	+= $(ldflags-y)
 
-head-y		:= arch/arc/kernel/head.o
-
-# See arch/arc/Kbuild for content of core part of the kernel
-core-y		+= arch/arc/
-
 # w/o this dtb won't embed into kernel binary
 core-y		+= arch/arc/boot/dts/
 
@@ -116,6 +110,3 @@ uImage: $(uimage-default-y)
 	@$(kecho) '  Image $(boot)/uImage is ready'
 
 CLEAN_FILES += $(boot)/uImage
-
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile
index 8483a86c743d..4237aa5de3a3 100644
--- a/arch/arc/boot/dts/Makefile
+++ b/arch/arc/boot/dts/Makefile
@@ -2,8 +2,8 @@
 # Built-in dtb
 builtindtb-y		:= nsim_700
 
-ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),"")
-	builtindtb-y	:= $(patsubst "%",%,$(CONFIG_ARC_BUILTIN_DTB_NAME))
+ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),)
+	builtindtb-y	:= $(CONFIG_ARC_BUILTIN_DTB_NAME)
 endif
 
 obj-y   += $(builtindtb-y).dtb.o
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index cd1edcf4f95e..3434c8131ecd 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -103,11 +103,11 @@
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			dma-coherent;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			dma-coherent;
 		};
 
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 70779386ca79..67556f4b7057 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -110,11 +110,11 @@
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			dma-coherent;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			dma-coherent;
 		};
 
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 99d3e7175bf7..b64435385304 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -87,13 +87,13 @@
 			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			compatible = "generic-ohci";
 			reg = < 0x60000 0x100 >;
 			interrupts = < 8 >;
diff --git a/arch/arc/boot/dts/haps_hs.dts b/arch/arc/boot/dts/haps_hs.dts
index 60d578e2781f..76ad527a0847 100644
--- a/arch/arc/boot/dts/haps_hs.dts
+++ b/arch/arc/boot/dts/haps_hs.dts
@@ -16,7 +16,7 @@
 	memory {
 		device_type = "memory";
 		/* CONFIG_LINUX_RAM_BASE needs to match low mem start */
-		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MB low mem */
+		reg = <0x0 0x80000000 0x0 0x40000000	/* 1 GB low mem */
 		       0x1 0x00000000 0x0 0x40000000>;	/* 1 GB highmem */
 	};
 
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index dcaa44e408ac..6691f4255077 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -234,7 +234,7 @@
 			};
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
 			reg = <0x60000 0x100>;
 			interrupts = <15>;
@@ -242,7 +242,7 @@
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
 			reg = <0x40000 0x100>;
 			interrupts = <15>;
@@ -275,7 +275,7 @@
 			cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>,
 				   <&creg_gpio 1 GPIO_ACTIVE_LOW>;
 
-			spi-flash@0 {
+			flash@0 {
 				compatible = "sst26wf016b", "jedec,spi-nor";
 				reg = <0>;
 				#address-cells = <1>;
diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index cbb179770293..90a412026e64 100644
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -46,7 +46,7 @@
 			clock-names = "stmmaceth";
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig
index 0016149f9583..81764160451f 100644
--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@@ -9,7 +9,6 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -36,9 +35,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@@ -100,7 +96,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig
index 5b031582a1cf..d5181275490e 100644
--- a/arch/arc/configs/axs103_defconfig
+++ b/arch/arc/configs/axs103_defconfig
@@ -9,7 +9,6 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -35,9 +34,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@@ -98,7 +94,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig
index d4eec39e0112..2f336d99a8cf 100644
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@@ -9,7 +9,6 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -36,9 +35,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@@ -101,7 +97,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
diff --git a/arch/arc/configs/haps_hs_defconfig b/arch/arc/configs/haps_hs_defconfig
index 7337cdf4ffdd..899b2fd5c71d 100644
--- a/arch/arc/configs/haps_hs_defconfig
+++ b/arch/arc/configs/haps_hs_defconfig
@@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
@@ -60,6 +59,5 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/haps_hs_smp_defconfig b/arch/arc/configs/haps_hs_smp_defconfig
index bc927221afc0..0d32aac8069f 100644
--- a/arch/arc/configs/haps_hs_smp_defconfig
+++ b/arch/arc/configs/haps_hs_smp_defconfig
@@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -60,6 +59,5 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig
index aa000075a575..d18378d2c2a6 100644
--- a/arch/arc/configs/hsdk_defconfig
+++ b/arch/arc/configs/hsdk_defconfig
@@ -9,7 +9,6 @@ CONFIG_NAMESPACES=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -86,7 +85,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig
index 326f6cde7826..3e9829775992 100644
--- a/arch/arc/configs/nsim_700_defconfig
+++ b/arch/arc/configs/nsim_700_defconfig
@@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
@@ -57,5 +56,4 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig
index bf39a0091679..502c87f351c8 100644
--- a/arch/arc/configs/nsimosci_defconfig
+++ b/arch/arc/configs/nsimosci_defconfig
@@ -10,7 +10,6 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
@@ -66,4 +65,3 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/arc/configs/nsimosci_hs_defconfig b/arch/arc/configs/nsimosci_hs_defconfig
index 7121bd71c543..f721cc3997d0 100644
--- a/arch/arc/configs/nsimosci_hs_defconfig
+++ b/arch/arc/configs/nsimosci_hs_defconfig
@@ -10,7 +10,6 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
@@ -64,4 +63,3 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/arc/configs/nsimosci_hs_smp_defconfig b/arch/arc/configs/nsimosci_hs_smp_defconfig
index f9863b294a70..1419fc946a08 100644
--- a/arch/arc/configs/nsimosci_hs_smp_defconfig
+++ b/arch/arc/configs/nsimosci_hs_smp_defconfig
@@ -8,7 +8,6 @@ CONFIG_IKCONFIG_PROC=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y
@@ -27,9 +26,6 @@ CONFIG_UNIX=y
 CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
@@ -38,7 +34,6 @@ CONFIG_DEVTMPFS=y
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
 # CONFIG_NET_VENDOR_INTEL is not set
@@ -75,5 +70,5 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FTRACE=y
+# CONFIG_NET_VENDOR_CADENCE is not set
diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig
index a12656ec0072..6f0d2be9d926 100644
--- a/arch/arc/configs/tb10x_defconfig
+++ b/arch/arc/configs/tb10x_defconfig
@@ -14,7 +14,6 @@ CONFIG_INITRAMFS_SOURCE="../tb10x-rootfs.cpio"
 CONFIG_INITRAMFS_ROOT_UID=2100
 CONFIG_INITRAMFS_ROOT_GID=501
 # CONFIG_RD_GZIP is not set
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_AIO is not set
 CONFIG_EMBEDDED=y
@@ -36,15 +35,11 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_NETDEVICES=y
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
@@ -91,16 +86,15 @@ CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_INSTALL=y
-CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_NET_VENDOR_CADENCE is not set
diff --git a/arch/arc/configs/vdk_hs38_defconfig b/arch/arc/configs/vdk_hs38_defconfig
index d7c858df520c..d3ef189c75f8 100644
--- a/arch/arc/configs/vdk_hs38_defconfig
+++ b/arch/arc/configs/vdk_hs38_defconfig
@@ -4,7 +4,6 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -59,8 +58,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-CONFIG_ARCPGU_RGB888=y
-CONFIG_ARCPGU_DISPTYPE=0
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
@@ -88,7 +85,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
index 015c1d43889e..944b347025fd 100644
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -4,7 +4,6 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -92,7 +91,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
diff --git a/arch/arc/include/asm/atomic-llsc.h b/arch/arc/include/asm/atomic-llsc.h
new file mode 100644
index 000000000000..1b0ffaeee16d
--- /dev/null
+++ b/arch/arc/include/asm/atomic-llsc.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ASM_ARC_ATOMIC_LLSC_H
+#define _ASM_ARC_ATOMIC_LLSC_H
+
+#define arch_atomic_set(v, i) WRITE_ONCE(((v)->counter), (i))
+
+#define ATOMIC_OP(op, asm_op)					\
+static inline void arch_atomic_##op(int i, atomic_t *v)			\
+{									\
+	unsigned int val;						\
+									\
+	__asm__ __volatile__(						\
+	"1:	llock   %[val], [%[ctr]]		\n"		\
+	"	" #asm_op " %[val], %[val], %[i]	\n"		\
+	"	scond   %[val], [%[ctr]]		\n"		\
+	"	bnz     1b				\n"		\
+	: [val]	"=&r"	(val) /* Early clobber to prevent reg reuse */	\
+	: [ctr]	"r"	(&v->counter), /* Not "m": llock only supports reg direct addr mode */	\
+	  [i]	"ir"	(i)						\
+	: "cc");							\
+}									\
+
+#define ATOMIC_OP_RETURN(op, asm_op)				\
+static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v)	\
+{									\
+	unsigned int val;						\
+									\
+	__asm__ __volatile__(						\
+	"1:	llock   %[val], [%[ctr]]		\n"		\
+	"	" #asm_op " %[val], %[val], %[i]	\n"		\
+	"	scond   %[val], [%[ctr]]		\n"		\
+	"	bnz     1b				\n"		\
+	: [val]	"=&r"	(val)						\
+	: [ctr]	"r"	(&v->counter),					\
+	  [i]	"ir"	(i)						\
+	: "cc");							\
+									\
+	return val;							\
+}
+
+#define arch_atomic_add_return_relaxed		arch_atomic_add_return_relaxed
+#define arch_atomic_sub_return_relaxed		arch_atomic_sub_return_relaxed
+
+#define ATOMIC_FETCH_OP(op, asm_op)				\
+static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
+{									\
+	unsigned int val, orig;						\
+									\
+	__asm__ __volatile__(						\
+	"1:	llock   %[orig], [%[ctr]]		\n"		\
+	"	" #asm_op " %[val], %[orig], %[i]	\n"		\
+	"	scond   %[val], [%[ctr]]		\n"		\
+	"	bnz     1b				\n"		\
+	: [val]	"=&r"	(val),						\
+	  [orig] "=&r" (orig)						\
+	: [ctr]	"r"	(&v->counter),					\
+	  [i]	"ir"	(i)						\
+	: "cc");							\
+									\
+	return orig;							\
+}
+
+#define arch_atomic_fetch_add_relaxed		arch_atomic_fetch_add_relaxed
+#define arch_atomic_fetch_sub_relaxed		arch_atomic_fetch_sub_relaxed
+
+#define arch_atomic_fetch_and_relaxed		arch_atomic_fetch_and_relaxed
+#define arch_atomic_fetch_andnot_relaxed	arch_atomic_fetch_andnot_relaxed
+#define arch_atomic_fetch_or_relaxed		arch_atomic_fetch_or_relaxed
+#define arch_atomic_fetch_xor_relaxed		arch_atomic_fetch_xor_relaxed
+
+#define ATOMIC_OPS(op, asm_op)					\
+	ATOMIC_OP(op, asm_op)					\
+	ATOMIC_OP_RETURN(op, asm_op)				\
+	ATOMIC_FETCH_OP(op, asm_op)
+
+ATOMIC_OPS(add, add)
+ATOMIC_OPS(sub, sub)
+
+#undef ATOMIC_OPS
+#define ATOMIC_OPS(op, asm_op)					\
+	ATOMIC_OP(op, asm_op)					\
+	ATOMIC_FETCH_OP(op, asm_op)
+
+ATOMIC_OPS(and, and)
+ATOMIC_OPS(andnot, bic)
+ATOMIC_OPS(or, or)
+ATOMIC_OPS(xor, xor)
+
+#define arch_atomic_andnot		arch_atomic_andnot
+
+#undef ATOMIC_OPS
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP
+
+#endif
diff --git a/arch/arc/include/asm/atomic-spinlock.h b/arch/arc/include/asm/atomic-spinlock.h
new file mode 100644
index 000000000000..2c830347bfb4
--- /dev/null
+++ b/arch/arc/include/asm/atomic-spinlock.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ASM_ARC_ATOMIC_SPLOCK_H
+#define _ASM_ARC_ATOMIC_SPLOCK_H
+
+/*
+ * Non hardware assisted Atomic-R-M-W
+ * Locking would change to irq-disabling only (UP) and spinlocks (SMP)
+ */
+
+static inline void arch_atomic_set(atomic_t *v, int i)
+{
+	/*
+	 * Independent of hardware support, all of the atomic_xxx() APIs need
+	 * to follow the same locking rules to make sure that a "hardware"
+	 * atomic insn (e.g. LD) doesn't clobber an "emulated" atomic insn
+	 * sequence
+	 *
+	 * Thus atomic_set() despite being 1 insn (and seemingly atomic)
+	 * requires the locking.
+	 */
+	unsigned long flags;
+
+	atomic_ops_lock(flags);
+	WRITE_ONCE(v->counter, i);
+	atomic_ops_unlock(flags);
+}
+
+#define arch_atomic_set_release(v, i)	arch_atomic_set((v), (i))
+
+#define ATOMIC_OP(op, c_op, asm_op)					\
+static inline void arch_atomic_##op(int i, atomic_t *v)			\
+{									\
+	unsigned long flags;						\
+									\
+	atomic_ops_lock(flags);						\
+	v->counter c_op i;						\
+	atomic_ops_unlock(flags);					\
+}
+
+#define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
+static inline int arch_atomic_##op##_return(int i, atomic_t *v)		\
+{									\
+	unsigned long flags;						\
+	unsigned int temp;						\
+									\
+	/*								\
+	 * spin lock/unlock provides the needed smp_mb() before/after	\
+	 */								\
+	atomic_ops_lock(flags);						\
+	temp = v->counter;						\
+	temp c_op i;							\
+	v->counter = temp;						\
+	atomic_ops_unlock(flags);					\
+									\
+	return temp;							\
+}
+
+#define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
+static inline int arch_atomic_fetch_##op(int i, atomic_t *v)		\
+{									\
+	unsigned long flags;						\
+	unsigned int orig;						\
+									\
+	/*								\
+	 * spin lock/unlock provides the needed smp_mb() before/after	\
+	 */								\
+	atomic_ops_lock(flags);						\
+	orig = v->counter;						\
+	v->counter c_op i;						\
+	atomic_ops_unlock(flags);					\
+									\
+	return orig;							\
+}
+
+#define ATOMIC_OPS(op, c_op, asm_op)					\
+	ATOMIC_OP(op, c_op, asm_op)					\
+	ATOMIC_OP_RETURN(op, c_op, asm_op)				\
+	ATOMIC_FETCH_OP(op, c_op, asm_op)
+
+ATOMIC_OPS(add, +=, add)
+ATOMIC_OPS(sub, -=, sub)
+
+#undef ATOMIC_OPS
+#define ATOMIC_OPS(op, c_op, asm_op)					\
+	ATOMIC_OP(op, c_op, asm_op)					\
+	ATOMIC_FETCH_OP(op, c_op, asm_op)
+
+ATOMIC_OPS(and, &=, and)
+ATOMIC_OPS(andnot, &= ~, bic)
+ATOMIC_OPS(or, |=, or)
+ATOMIC_OPS(xor, ^=, xor)
+
+#define arch_atomic_andnot		arch_atomic_andnot
+#define arch_atomic_fetch_andnot	arch_atomic_fetch_andnot
+
+#undef ATOMIC_OPS
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP
+
+#endif
diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h
index 5afc79c9b2f5..52ee51e1ff7c 100644
--- a/arch/arc/include/asm/atomic.h
+++ b/arch/arc/include/asm/atomic.h
@@ -14,438 +14,46 @@
 #include <asm/barrier.h>
 #include <asm/smp.h>
 
-#define atomic_read(v)  READ_ONCE((v)->counter)
+#define arch_atomic_read(v)  READ_ONCE((v)->counter)
 
 #ifdef CONFIG_ARC_HAS_LLSC
-
-#define atomic_set(v, i) WRITE_ONCE(((v)->counter), (i))
-
-#define ATOMIC_OP(op, c_op, asm_op)					\
-static inline void atomic_##op(int i, atomic_t *v)			\
-{									\
-	unsigned int val;						\
-									\
-	__asm__ __volatile__(						\
-	"1:	llock   %[val], [%[ctr]]		\n"		\
-	"	" #asm_op " %[val], %[val], %[i]	\n"		\
-	"	scond   %[val], [%[ctr]]		\n"		\
-	"	bnz     1b				\n"		\
-	: [val]	"=&r"	(val) /* Early clobber to prevent reg reuse */	\
-	: [ctr]	"r"	(&v->counter), /* Not "m": llock only supports reg direct addr mode */	\
-	  [i]	"ir"	(i)						\
-	: "cc");							\
-}									\
-
-#define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
-static inline int atomic_##op##_return(int i, atomic_t *v)		\
-{									\
-	unsigned int val;						\
-									\
-	/*								\
-	 * Explicit full memory barrier needed before/after as		\
-	 * LLOCK/SCOND themselves don't provide any such semantics	\
-	 */								\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"1:	llock   %[val], [%[ctr]]		\n"		\
-	"	" #asm_op " %[val], %[val], %[i]	\n"		\
-	"	scond   %[val], [%[ctr]]		\n"		\
-	"	bnz     1b				\n"		\
-	: [val]	"=&r"	(val)						\
-	: [ctr]	"r"	(&v->counter),					\
-	  [i]	"ir"	(i)						\
-	: "cc");							\
-									\
-	smp_mb();							\
-									\
-	return val;							\
-}
-
-#define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
-static inline int atomic_fetch_##op(int i, atomic_t *v)			\
-{									\
-	unsigned int val, orig;						\
-									\
-	/*								\
-	 * Explicit full memory barrier needed before/after as		\
-	 * LLOCK/SCOND themselves don't provide any such semantics	\
-	 */								\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"1:	llock   %[orig], [%[ctr]]		\n"		\
-	"	" #asm_op " %[val], %[orig], %[i]	\n"		\
-	"	scond   %[val], [%[ctr]]		\n"		\
-	"	bnz     1b				\n"		\
-	: [val]	"=&r"	(val),						\
-	  [orig] "=&r" (orig)						\
-	: [ctr]	"r"	(&v->counter),					\
-	  [i]	"ir"	(i)						\
-	: "cc");							\
-									\
-	smp_mb();							\
-									\
-	return orig;							\
-}
-
-#else	/* !CONFIG_ARC_HAS_LLSC */
-
-#ifndef CONFIG_SMP
-
- /* violating atomic_xxx API locking protocol in UP for optimization sake */
-#define atomic_set(v, i) WRITE_ONCE(((v)->counter), (i))
-
+#include <asm/atomic-llsc.h>
 #else
+#include <asm/atomic-spinlock.h>
+#endif
 
-static inline void atomic_set(atomic_t *v, int i)
-{
-	/*
-	 * Independent of hardware support, all of the atomic_xxx() APIs need
-	 * to follow the same locking rules to make sure that a "hardware"
-	 * atomic insn (e.g. LD) doesn't clobber an "emulated" atomic insn
-	 * sequence
-	 *
-	 * Thus atomic_set() despite being 1 insn (and seemingly atomic)
-	 * requires the locking.
-	 */
-	unsigned long flags;
+#define arch_atomic_cmpxchg(v, o, n)					\
+({									\
+	arch_cmpxchg(&((v)->counter), (o), (n));			\
+})
 
-	atomic_ops_lock(flags);
-	WRITE_ONCE(v->counter, i);
-	atomic_ops_unlock(flags);
-}
+#ifdef arch_cmpxchg_relaxed
+#define arch_atomic_cmpxchg_relaxed(v, o, n)				\
+({									\
+	arch_cmpxchg_relaxed(&((v)->counter), (o), (n));		\
+})
+#endif
 
-#define atomic_set_release(v, i)	atomic_set((v), (i))
+#define arch_atomic_xchg(v, n)						\
+({									\
+	arch_xchg(&((v)->counter), (n));				\
+})
 
+#ifdef arch_xchg_relaxed
+#define arch_atomic_xchg_relaxed(v, n)					\
+({									\
+	arch_xchg_relaxed(&((v)->counter), (n));			\
+})
 #endif
 
 /*
- * Non hardware assisted Atomic-R-M-W
- * Locking would change to irq-disabling only (UP) and spinlocks (SMP)
+ * 64-bit atomics
  */
-
-#define ATOMIC_OP(op, c_op, asm_op)					\
-static inline void atomic_##op(int i, atomic_t *v)			\
-{									\
-	unsigned long flags;						\
-									\
-	atomic_ops_lock(flags);						\
-	v->counter c_op i;						\
-	atomic_ops_unlock(flags);					\
-}
-
-#define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
-static inline int atomic_##op##_return(int i, atomic_t *v)		\
-{									\
-	unsigned long flags;						\
-	unsigned long temp;						\
-									\
-	/*								\
-	 * spin lock/unlock provides the needed smp_mb() before/after	\
-	 */								\
-	atomic_ops_lock(flags);						\
-	temp = v->counter;						\
-	temp c_op i;							\
-	v->counter = temp;						\
-	atomic_ops_unlock(flags);					\
-									\
-	return temp;							\
-}
-
-#define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
-static inline int atomic_fetch_##op(int i, atomic_t *v)			\
-{									\
-	unsigned long flags;						\
-	unsigned long orig;						\
-									\
-	/*								\
-	 * spin lock/unlock provides the needed smp_mb() before/after	\
-	 */								\
-	atomic_ops_lock(flags);						\
-	orig = v->counter;						\
-	v->counter c_op i;						\
-	atomic_ops_unlock(flags);					\
-									\
-	return orig;							\
-}
-
-#endif /* !CONFIG_ARC_HAS_LLSC */
-
-#define ATOMIC_OPS(op, c_op, asm_op)					\
-	ATOMIC_OP(op, c_op, asm_op)					\
-	ATOMIC_OP_RETURN(op, c_op, asm_op)				\
-	ATOMIC_FETCH_OP(op, c_op, asm_op)
-
-ATOMIC_OPS(add, +=, add)
-ATOMIC_OPS(sub, -=, sub)
-
-#define atomic_andnot		atomic_andnot
-#define atomic_fetch_andnot	atomic_fetch_andnot
-
-#undef ATOMIC_OPS
-#define ATOMIC_OPS(op, c_op, asm_op)					\
-	ATOMIC_OP(op, c_op, asm_op)					\
-	ATOMIC_FETCH_OP(op, c_op, asm_op)
-
-ATOMIC_OPS(and, &=, and)
-ATOMIC_OPS(andnot, &= ~, bic)
-ATOMIC_OPS(or, |=, or)
-ATOMIC_OPS(xor, ^=, xor)
-
-#undef ATOMIC_OPS
-#undef ATOMIC_FETCH_OP
-#undef ATOMIC_OP_RETURN
-#undef ATOMIC_OP
-
 #ifdef CONFIG_GENERIC_ATOMIC64
-
 #include <asm-generic/atomic64.h>
-
-#else	/* Kconfig ensures this is only enabled with needed h/w assist */
-
-/*
- * ARCv2 supports 64-bit exclusive load (LLOCKD) / store (SCONDD)
- *  - The address HAS to be 64-bit aligned
- *  - There are 2 semantics involved here:
- *    = exclusive implies no interim update between load/store to same addr
- *    = both words are observed/updated together: this is guaranteed even
- *      for regular 64-bit load (LDD) / store (STD). Thus atomic64_set()
- *      is NOT required to use LLOCKD+SCONDD, STD suffices
- */
-
-typedef struct {
-	s64 __aligned(8) counter;
-} atomic64_t;
-
-#define ATOMIC64_INIT(a) { (a) }
-
-static inline s64 atomic64_read(const atomic64_t *v)
-{
-	s64 val;
-
-	__asm__ __volatile__(
-	"	ldd   %0, [%1]	\n"
-	: "=r"(val)
-	: "r"(&v->counter));
-
-	return val;
-}
-
-static inline void atomic64_set(atomic64_t *v, s64 a)
-{
-	/*
-	 * This could have been a simple assignment in "C" but would need
-	 * explicit volatile. Otherwise gcc optimizers could elide the store
-	 * which borked atomic64 self-test
-	 * In the inline asm version, memory clobber needed for exact same
-	 * reason, to tell gcc about the store.
-	 *
-	 * This however is not needed for sibling atomic64_add() etc since both
-	 * load/store are explicitly done in inline asm. As long as API is used
-	 * for each access, gcc has no way to optimize away any load/store
-	 */
-	__asm__ __volatile__(
-	"	std   %0, [%1]	\n"
-	:
-	: "r"(a), "r"(&v->counter)
-	: "memory");
-}
-
-#define ATOMIC64_OP(op, op1, op2)					\
-static inline void atomic64_##op(s64 a, atomic64_t *v)			\
-{									\
-	s64 val;							\
-									\
-	__asm__ __volatile__(						\
-	"1:				\n"				\
-	"	llockd  %0, [%1]	\n"				\
-	"	" #op1 " %L0, %L0, %L2	\n"				\
-	"	" #op2 " %H0, %H0, %H2	\n"				\
-	"	scondd   %0, [%1]	\n"				\
-	"	bnz     1b		\n"				\
-	: "=&r"(val)							\
-	: "r"(&v->counter), "ir"(a)					\
-	: "cc");							\
-}									\
-
-#define ATOMIC64_OP_RETURN(op, op1, op2)		        	\
-static inline s64 atomic64_##op##_return(s64 a, atomic64_t *v)		\
-{									\
-	s64 val;							\
-									\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"1:				\n"				\
-	"	llockd   %0, [%1]	\n"				\
-	"	" #op1 " %L0, %L0, %L2	\n"				\
-	"	" #op2 " %H0, %H0, %H2	\n"				\
-	"	scondd   %0, [%1]	\n"				\
-	"	bnz     1b		\n"				\
-	: [val] "=&r"(val)						\
-	: "r"(&v->counter), "ir"(a)					\
-	: "cc");	/* memory clobber comes from smp_mb() */	\
-									\
-	smp_mb();							\
-									\
-	return val;							\
-}
-
-#define ATOMIC64_FETCH_OP(op, op1, op2)		        		\
-static inline s64 atomic64_fetch_##op(s64 a, atomic64_t *v)		\
-{									\
-	s64 val, orig;							\
-									\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"1:				\n"				\
-	"	llockd   %0, [%2]	\n"				\
-	"	" #op1 " %L1, %L0, %L3	\n"				\
-	"	" #op2 " %H1, %H0, %H3	\n"				\
-	"	scondd   %1, [%2]	\n"				\
-	"	bnz     1b		\n"				\
-	: "=&r"(orig), "=&r"(val)					\
-	: "r"(&v->counter), "ir"(a)					\
-	: "cc");	/* memory clobber comes from smp_mb() */	\
-									\
-	smp_mb();							\
-									\
-	return orig;							\
-}
-
-#define ATOMIC64_OPS(op, op1, op2)					\
-	ATOMIC64_OP(op, op1, op2)					\
-	ATOMIC64_OP_RETURN(op, op1, op2)				\
-	ATOMIC64_FETCH_OP(op, op1, op2)
-
-#define atomic64_andnot		atomic64_andnot
-#define atomic64_fetch_andnot	atomic64_fetch_andnot
-
-ATOMIC64_OPS(add, add.f, adc)
-ATOMIC64_OPS(sub, sub.f, sbc)
-ATOMIC64_OPS(and, and, and)
-ATOMIC64_OPS(andnot, bic, bic)
-ATOMIC64_OPS(or, or, or)
-ATOMIC64_OPS(xor, xor, xor)
-
-#undef ATOMIC64_OPS
-#undef ATOMIC64_FETCH_OP
-#undef ATOMIC64_OP_RETURN
-#undef ATOMIC64_OP
-
-static inline s64
-atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new)
-{
-	s64 prev;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-	"1:	llockd  %0, [%1]	\n"
-	"	brne    %L0, %L2, 2f	\n"
-	"	brne    %H0, %H2, 2f	\n"
-	"	scondd  %3, [%1]	\n"
-	"	bnz     1b		\n"
-	"2:				\n"
-	: "=&r"(prev)
-	: "r"(ptr), "ir"(expected), "r"(new)
-	: "cc");	/* memory clobber comes from smp_mb() */
-
-	smp_mb();
-
-	return prev;
-}
-
-static inline s64 atomic64_xchg(atomic64_t *ptr, s64 new)
-{
-	s64 prev;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-	"1:	llockd  %0, [%1]	\n"
-	"	scondd  %2, [%1]	\n"
-	"	bnz     1b		\n"
-	"2:				\n"
-	: "=&r"(prev)
-	: "r"(ptr), "r"(new)
-	: "cc");	/* memory clobber comes from smp_mb() */
-
-	smp_mb();
-
-	return prev;
-}
-
-/**
- * atomic64_dec_if_positive - decrement by 1 if old value positive
- * @v: pointer of type atomic64_t
- *
- * The function returns the old value of *v minus 1, even if
- * the atomic variable, v, was not decremented.
- */
-
-static inline s64 atomic64_dec_if_positive(atomic64_t *v)
-{
-	s64 val;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-	"1:	llockd  %0, [%1]	\n"
-	"	sub.f   %L0, %L0, 1	# w0 - 1, set C on borrow\n"
-	"	sub.c   %H0, %H0, 1	# if C set, w1 - 1\n"
-	"	brlt    %H0, 0, 2f	\n"
-	"	scondd  %0, [%1]	\n"
-	"	bnz     1b		\n"
-	"2:				\n"
-	: "=&r"(val)
-	: "r"(&v->counter)
-	: "cc");	/* memory clobber comes from smp_mb() */
-
-	smp_mb();
-
-	return val;
-}
-#define atomic64_dec_if_positive atomic64_dec_if_positive
-
-/**
- * atomic64_fetch_add_unless - add unless the number is a given value
- * @v: pointer of type atomic64_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, if it was not @u.
- * Returns the old value of @v
- */
-static inline s64 atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
-{
-	s64 old, temp;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-	"1:	llockd  %0, [%2]	\n"
-	"	brne	%L0, %L4, 2f	# continue to add since v != u \n"
-	"	breq.d	%H0, %H4, 3f	# return since v == u \n"
-	"2:				\n"
-	"	add.f   %L1, %L0, %L3	\n"
-	"	adc     %H1, %H0, %H3	\n"
-	"	scondd  %1, [%2]	\n"
-	"	bnz     1b		\n"
-	"3:				\n"
-	: "=&r"(old), "=&r" (temp)
-	: "r"(&v->counter), "r"(a), "r"(u)
-	: "cc");	/* memory clobber comes from smp_mb() */
-
-	smp_mb();
-
-	return old;
-}
-#define atomic64_fetch_add_unless atomic64_fetch_add_unless
-
-#endif	/* !CONFIG_GENERIC_ATOMIC64 */
+#else
+#include <asm/atomic64-arcv2.h>
+#endif
 
 #endif	/* !__ASSEMBLY__ */
 
diff --git a/arch/arc/include/asm/atomic64-arcv2.h b/arch/arc/include/asm/atomic64-arcv2.h
new file mode 100644
index 000000000000..c5a8010fdc97
--- /dev/null
+++ b/arch/arc/include/asm/atomic64-arcv2.h
@@ -0,0 +1,250 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * ARCv2 supports 64-bit exclusive load (LLOCKD) / store (SCONDD)
+ *  - The address HAS to be 64-bit aligned
+ */
+
+#ifndef _ASM_ARC_ATOMIC64_ARCV2_H
+#define _ASM_ARC_ATOMIC64_ARCV2_H
+
+typedef struct {
+	s64 __aligned(8) counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(a) { (a) }
+
+static inline s64 arch_atomic64_read(const atomic64_t *v)
+{
+	s64 val;
+
+	__asm__ __volatile__(
+	"	ldd   %0, [%1]	\n"
+	: "=r"(val)
+	: "r"(&v->counter));
+
+	return val;
+}
+
+static inline void arch_atomic64_set(atomic64_t *v, s64 a)
+{
+	/*
+	 * This could have been a simple assignment in "C" but would need
+	 * explicit volatile. Otherwise gcc optimizers could elide the store
+	 * which borked atomic64 self-test
+	 * In the inline asm version, memory clobber needed for exact same
+	 * reason, to tell gcc about the store.
+	 *
+	 * This however is not needed for sibling atomic64_add() etc since both
+	 * load/store are explicitly done in inline asm. As long as API is used
+	 * for each access, gcc has no way to optimize away any load/store
+	 */
+	__asm__ __volatile__(
+	"	std   %0, [%1]	\n"
+	:
+	: "r"(a), "r"(&v->counter)
+	: "memory");
+}
+
+#define ATOMIC64_OP(op, op1, op2)					\
+static inline void arch_atomic64_##op(s64 a, atomic64_t *v)		\
+{									\
+	s64 val;							\
+									\
+	__asm__ __volatile__(						\
+	"1:				\n"				\
+	"	llockd  %0, [%1]	\n"				\
+	"	" #op1 " %L0, %L0, %L2	\n"				\
+	"	" #op2 " %H0, %H0, %H2	\n"				\
+	"	scondd   %0, [%1]	\n"				\
+	"	bnz     1b		\n"				\
+	: "=&r"(val)							\
+	: "r"(&v->counter), "ir"(a)					\
+	: "cc");							\
+}									\
+
+#define ATOMIC64_OP_RETURN(op, op1, op2)		        	\
+static inline s64 arch_atomic64_##op##_return_relaxed(s64 a, atomic64_t *v)	\
+{									\
+	s64 val;							\
+									\
+	__asm__ __volatile__(						\
+	"1:				\n"				\
+	"	llockd   %0, [%1]	\n"				\
+	"	" #op1 " %L0, %L0, %L2	\n"				\
+	"	" #op2 " %H0, %H0, %H2	\n"				\
+	"	scondd   %0, [%1]	\n"				\
+	"	bnz     1b		\n"				\
+	: [val] "=&r"(val)						\
+	: "r"(&v->counter), "ir"(a)					\
+	: "cc");	/* memory clobber comes from smp_mb() */	\
+									\
+	return val;							\
+}
+
+#define arch_atomic64_add_return_relaxed	arch_atomic64_add_return_relaxed
+#define arch_atomic64_sub_return_relaxed	arch_atomic64_sub_return_relaxed
+
+#define ATOMIC64_FETCH_OP(op, op1, op2)		        		\
+static inline s64 arch_atomic64_fetch_##op##_relaxed(s64 a, atomic64_t *v)	\
+{									\
+	s64 val, orig;							\
+									\
+	__asm__ __volatile__(						\
+	"1:				\n"				\
+	"	llockd   %0, [%2]	\n"				\
+	"	" #op1 " %L1, %L0, %L3	\n"				\
+	"	" #op2 " %H1, %H0, %H3	\n"				\
+	"	scondd   %1, [%2]	\n"				\
+	"	bnz     1b		\n"				\
+	: "=&r"(orig), "=&r"(val)					\
+	: "r"(&v->counter), "ir"(a)					\
+	: "cc");	/* memory clobber comes from smp_mb() */	\
+									\
+	return orig;							\
+}
+
+#define arch_atomic64_fetch_add_relaxed		arch_atomic64_fetch_add_relaxed
+#define arch_atomic64_fetch_sub_relaxed		arch_atomic64_fetch_sub_relaxed
+
+#define arch_atomic64_fetch_and_relaxed		arch_atomic64_fetch_and_relaxed
+#define arch_atomic64_fetch_andnot_relaxed	arch_atomic64_fetch_andnot_relaxed
+#define arch_atomic64_fetch_or_relaxed		arch_atomic64_fetch_or_relaxed
+#define arch_atomic64_fetch_xor_relaxed		arch_atomic64_fetch_xor_relaxed
+
+#define ATOMIC64_OPS(op, op1, op2)					\
+	ATOMIC64_OP(op, op1, op2)					\
+	ATOMIC64_OP_RETURN(op, op1, op2)				\
+	ATOMIC64_FETCH_OP(op, op1, op2)
+
+ATOMIC64_OPS(add, add.f, adc)
+ATOMIC64_OPS(sub, sub.f, sbc)
+
+#undef ATOMIC64_OPS
+#define ATOMIC64_OPS(op, op1, op2)					\
+	ATOMIC64_OP(op, op1, op2)					\
+	ATOMIC64_FETCH_OP(op, op1, op2)
+
+ATOMIC64_OPS(and, and, and)
+ATOMIC64_OPS(andnot, bic, bic)
+ATOMIC64_OPS(or, or, or)
+ATOMIC64_OPS(xor, xor, xor)
+
+#define arch_atomic64_andnot		arch_atomic64_andnot
+
+#undef ATOMIC64_OPS
+#undef ATOMIC64_FETCH_OP
+#undef ATOMIC64_OP_RETURN
+#undef ATOMIC64_OP
+
+static inline s64
+arch_atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new)
+{
+	s64 prev;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%1]	\n"
+	"	brne    %L0, %L2, 2f	\n"
+	"	brne    %H0, %H2, 2f	\n"
+	"	scondd  %3, [%1]	\n"
+	"	bnz     1b		\n"
+	"2:				\n"
+	: "=&r"(prev)
+	: "r"(ptr), "ir"(expected), "r"(new)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return prev;
+}
+
+static inline s64 arch_atomic64_xchg(atomic64_t *ptr, s64 new)
+{
+	s64 prev;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%1]	\n"
+	"	scondd  %2, [%1]	\n"
+	"	bnz     1b		\n"
+	"2:				\n"
+	: "=&r"(prev)
+	: "r"(ptr), "r"(new)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return prev;
+}
+
+/**
+ * arch_atomic64_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic64_t
+ *
+ * The function returns the old value of *v minus 1, even if
+ * the atomic variable, v, was not decremented.
+ */
+
+static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
+{
+	s64 val;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%1]	\n"
+	"	sub.f   %L0, %L0, 1	# w0 - 1, set C on borrow\n"
+	"	sub.c   %H0, %H0, 1	# if C set, w1 - 1\n"
+	"	brlt    %H0, 0, 2f	\n"
+	"	scondd  %0, [%1]	\n"
+	"	bnz     1b		\n"
+	"2:				\n"
+	: "=&r"(val)
+	: "r"(&v->counter)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return val;
+}
+#define arch_atomic64_dec_if_positive arch_atomic64_dec_if_positive
+
+/**
+ * arch_atomic64_fetch_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, if it was not @u.
+ * Returns the old value of @v
+ */
+static inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
+{
+	s64 old, temp;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%2]	\n"
+	"	brne	%L0, %L4, 2f	# continue to add since v != u \n"
+	"	breq.d	%H0, %H4, 3f	# return since v == u \n"
+	"2:				\n"
+	"	add.f   %L1, %L0, %L3	\n"
+	"	adc     %H1, %H0, %H3	\n"
+	"	scondd  %1, [%2]	\n"
+	"	bnz     1b		\n"
+	"3:				\n"
+	: "=&r"(old), "=&r" (temp)
+	: "r"(&v->counter), "r"(a), "r"(u)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return old;
+}
+#define arch_atomic64_fetch_add_unless arch_atomic64_fetch_add_unless
+
+#endif
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index fb98440c0bd4..f5a936496f06 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -14,188 +14,6 @@
 
 #include <linux/types.h>
 #include <linux/compiler.h>
-#include <asm/barrier.h>
-#ifndef CONFIG_ARC_HAS_LLSC
-#include <asm/smp.h>
-#endif
-
-#ifdef CONFIG_ARC_HAS_LLSC
-
-/*
- * Hardware assisted Atomic-R-M-W
- */
-
-#define BIT_OP(op, c_op, asm_op)					\
-static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	unsigned int temp;						\
-									\
-	m += nr >> 5;							\
-									\
-	nr &= 0x1f;							\
-									\
-	__asm__ __volatile__(						\
-	"1:	llock       %0, [%1]		\n"			\
-	"	" #asm_op " %0, %0, %2	\n"				\
-	"	scond       %0, [%1]		\n"			\
-	"	bnz         1b			\n"			\
-	: "=&r"(temp)	/* Early clobber, to prevent reg reuse */	\
-	: "r"(m),	/* Not "m": llock only supports reg direct addr mode */	\
-	  "ir"(nr)							\
-	: "cc");							\
-}
-
-/*
- * Semantically:
- *    Test the bit
- *    if clear
- *        set it and return 0 (old value)
- *    else
- *        return 1 (old value).
- *
- * Since ARC lacks a equivalent h/w primitive, the bit is set unconditionally
- * and the old value of bit is returned
- */
-#define TEST_N_BIT_OP(op, c_op, asm_op)					\
-static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	unsigned long old, temp;					\
-									\
-	m += nr >> 5;							\
-									\
-	nr &= 0x1f;							\
-									\
-	/*								\
-	 * Explicit full memory barrier needed before/after as		\
-	 * LLOCK/SCOND themselves don't provide any such smenatic	\
-	 */								\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"1:	llock       %0, [%2]	\n"				\
-	"	" #asm_op " %1, %0, %3	\n"				\
-	"	scond       %1, [%2]	\n"				\
-	"	bnz         1b		\n"				\
-	: "=&r"(old), "=&r"(temp)					\
-	: "r"(m), "ir"(nr)						\
-	: "cc");							\
-									\
-	smp_mb();							\
-									\
-	return (old & (1 << nr)) != 0;					\
-}
-
-#else /* !CONFIG_ARC_HAS_LLSC */
-
-/*
- * Non hardware assisted Atomic-R-M-W
- * Locking would change to irq-disabling only (UP) and spinlocks (SMP)
- *
- * There's "significant" micro-optimization in writing our own variants of
- * bitops (over generic variants)
- *
- * (1) The generic APIs have "signed" @nr while we have it "unsigned"
- *     This avoids extra code to be generated for pointer arithmatic, since
- *     is "not sure" that index is NOT -ve
- * (2) Utilize the fact that ARCompact bit fidding insn (BSET/BCLR/ASL) etc
- *     only consider bottom 5 bits of @nr, so NO need to mask them off.
- *     (GCC Quirk: however for constant @nr we still need to do the masking
- *             at compile time)
- */
-
-#define BIT_OP(op, c_op, asm_op)					\
-static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	unsigned long temp, flags;					\
-	m += nr >> 5;							\
-									\
-	/*								\
-	 * spin lock/unlock provide the needed smp_mb() before/after	\
-	 */								\
-	bitops_lock(flags);						\
-									\
-	temp = *m;							\
-	*m = temp c_op (1UL << (nr & 0x1f));					\
-									\
-	bitops_unlock(flags);						\
-}
-
-#define TEST_N_BIT_OP(op, c_op, asm_op)					\
-static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	unsigned long old, flags;					\
-	m += nr >> 5;							\
-									\
-	bitops_lock(flags);						\
-									\
-	old = *m;							\
-	*m = old c_op (1UL << (nr & 0x1f));				\
-									\
-	bitops_unlock(flags);						\
-									\
-	return (old & (1UL << (nr & 0x1f))) != 0;			\
-}
-
-#endif
-
-/***************************************
- * Non atomic variants
- **************************************/
-
-#define __BIT_OP(op, c_op, asm_op)					\
-static inline void __##op##_bit(unsigned long nr, volatile unsigned long *m)	\
-{									\
-	unsigned long temp;						\
-	m += nr >> 5;							\
-									\
-	temp = *m;							\
-	*m = temp c_op (1UL << (nr & 0x1f));				\
-}
-
-#define __TEST_N_BIT_OP(op, c_op, asm_op)				\
-static inline int __test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	unsigned long old;						\
-	m += nr >> 5;							\
-									\
-	old = *m;							\
-	*m = old c_op (1UL << (nr & 0x1f));				\
-									\
-	return (old & (1UL << (nr & 0x1f))) != 0;			\
-}
-
-#define BIT_OPS(op, c_op, asm_op)					\
-									\
-	/* set_bit(), clear_bit(), change_bit() */			\
-	BIT_OP(op, c_op, asm_op)					\
-									\
-	/* test_and_set_bit(), test_and_clear_bit(), test_and_change_bit() */\
-	TEST_N_BIT_OP(op, c_op, asm_op)					\
-									\
-	/* __set_bit(), __clear_bit(), __change_bit() */		\
-	__BIT_OP(op, c_op, asm_op)					\
-									\
-	/* __test_and_set_bit(), __test_and_clear_bit(), __test_and_change_bit() */\
-	__TEST_N_BIT_OP(op, c_op, asm_op)
-
-BIT_OPS(set, |, bset)
-BIT_OPS(clear, & ~, bclr)
-BIT_OPS(change, ^, bxor)
-
-/*
- * This routine doesn't need to be atomic.
- */
-static inline int
-test_bit(unsigned int nr, const volatile unsigned long *addr)
-{
-	unsigned long mask;
-
-	addr += nr >> 5;
-
-	mask = 1UL << (nr & 0x1f);
-
-	return ((mask & *addr) != 0);
-}
 
 #ifdef CONFIG_ISA_ARCOMPACT
 
@@ -264,7 +82,7 @@ static inline __attribute__ ((const)) int fls(unsigned int x)
 /*
  * __fls: Similar to fls, but zero based (0-31)
  */
-static inline __attribute__ ((const)) int __fls(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
 {
 	if (!x)
 		return 0;
@@ -296,7 +114,7 @@ static inline __attribute__ ((const)) unsigned long __ffs(unsigned long word)
  * @result: [1-32]
  * fls(1) = 1, fls(0x80000000) = 32, fls(0) = 0
  */
-static inline __attribute__ ((const)) int fls(unsigned long x)
+static inline __attribute__ ((const)) int fls(unsigned int x)
 {
 	int n;
 
@@ -313,7 +131,7 @@ static inline __attribute__ ((const)) int fls(unsigned long x)
 /*
  * __fls: Similar to fls, but zero based (0-31). Also 0 if no bit set
  */
-static inline __attribute__ ((const)) int __fls(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
 {
 	/* FLS insn has exactly same semantics as the API */
 	return	__builtin_arc_fls(x);
@@ -323,7 +141,7 @@ static inline __attribute__ ((const)) int __fls(unsigned long x)
  * ffs = Find First Set in word (LSB to MSB)
  * @result: [1-32], 0 if all 0's
  */
-static inline __attribute__ ((const)) int ffs(unsigned long x)
+static inline __attribute__ ((const)) int ffs(unsigned int x)
 {
 	int n;
 
@@ -368,8 +186,9 @@ static inline __attribute__ ((const)) unsigned long __ffs(unsigned long x)
 #include <asm-generic/bitops/fls64.h>
 #include <asm-generic/bitops/sched.h>
 #include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
 
-#include <asm-generic/bitops/find.h>
 #include <asm-generic/bitops/le.h>
 #include <asm-generic/bitops/ext2-atomic-setbit.h>
 
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
index d8ece4292388..f0f1fc5d62b6 100644
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@@ -62,10 +62,6 @@
 #define ARCH_SLAB_MINALIGN	8
 #endif
 
-extern void arc_cache_init(void);
-extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
-extern void read_decode_cache_bcr(void);
-
 extern int ioc_enable;
 extern unsigned long perip_base, perip_end;
 
diff --git a/arch/arc/include/asm/checksum.h b/arch/arc/include/asm/checksum.h
index 69debd77cd04..0b485800a392 100644
--- a/arch/arc/include/asm/checksum.h
+++ b/arch/arc/include/asm/checksum.h
@@ -24,7 +24,7 @@
  */
 static inline __sum16 csum_fold(__wsum s)
 {
-	unsigned r = s << 16 | s >> 16;	/* ror */
+	unsigned int r = s << 16 | s >> 16;	/* ror */
 	s = ~s;
 	s -= r;
 	return s >> 16;
diff --git a/arch/arc/include/asm/cmpxchg.h b/arch/arc/include/asm/cmpxchg.h
index 9b87e162e539..e138fde067de 100644
--- a/arch/arc/include/asm/cmpxchg.h
+++ b/arch/arc/include/asm/cmpxchg.h
@@ -6,6 +6,7 @@
 #ifndef __ASM_ARC_CMPXCHG_H
 #define __ASM_ARC_CMPXCHG_H
 
+#include <linux/build_bug.h>
 #include <linux/types.h>
 
 #include <asm/barrier.h>
@@ -13,146 +14,130 @@
 
 #ifdef CONFIG_ARC_HAS_LLSC
 
-static inline unsigned long
-__cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
-{
-	unsigned long prev;
-
-	/*
-	 * Explicit full memory barrier needed before/after as
-	 * LLOCK/SCOND themselves don't provide any such semantics
-	 */
-	smp_mb();
-
-	__asm__ __volatile__(
-	"1:	llock   %0, [%1]	\n"
-	"	brne    %0, %2, 2f	\n"
-	"	scond   %3, [%1]	\n"
-	"	bnz     1b		\n"
-	"2:				\n"
-	: "=&r"(prev)	/* Early clobber, to prevent reg reuse */
-	: "r"(ptr),	/* Not "m": llock only supports reg direct addr mode */
-	  "ir"(expected),
-	  "r"(new)	/* can't be "ir". scond can't take LIMM for "b" */
-	: "cc", "memory"); /* so that gcc knows memory is being written here */
-
-	smp_mb();
-
-	return prev;
-}
-
-#else /* !CONFIG_ARC_HAS_LLSC */
-
-static inline unsigned long
-__cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
-{
-	unsigned long flags;
-	int prev;
-	volatile unsigned long *p = ptr;
-
-	/*
-	 * spin lock/unlock provide the needed smp_mb() before/after
-	 */
-	atomic_ops_lock(flags);
-	prev = *p;
-	if (prev == expected)
-		*p = new;
-	atomic_ops_unlock(flags);
-	return prev;
-}
-
-#endif
+/*
+ * if (*ptr == @old)
+ *      *ptr = @new
+ */
+#define __cmpxchg(ptr, old, new)					\
+({									\
+	__typeof__(*(ptr)) _prev;					\
+									\
+	__asm__ __volatile__(						\
+	"1:	llock  %0, [%1]	\n"					\
+	"	brne   %0, %2, 2f	\n"				\
+	"	scond  %3, [%1]	\n"					\
+	"	bnz     1b		\n"				\
+	"2:				\n"				\
+	: "=&r"(_prev)	/* Early clobber prevent reg reuse */		\
+	: "r"(ptr),	/* Not "m": llock only supports reg */		\
+	  "ir"(old),							\
+	  "r"(new)	/* Not "ir": scond can't take LIMM */		\
+	: "cc",								\
+	  "memory");	/* gcc knows memory is clobbered */		\
+									\
+	_prev;								\
+})
 
-#define cmpxchg(ptr, o, n) ({				\
-	(typeof(*(ptr)))__cmpxchg((ptr),		\
-				  (unsigned long)(o),	\
-				  (unsigned long)(n));	\
+#define arch_cmpxchg_relaxed(ptr, old, new)				\
+({									\
+	__typeof__(ptr) _p_ = (ptr);					\
+	__typeof__(*(ptr)) _o_ = (old);					\
+	__typeof__(*(ptr)) _n_ = (new);					\
+	__typeof__(*(ptr)) _prev_;					\
+									\
+	switch(sizeof((_p_))) {						\
+	case 4:								\
+		_prev_ = __cmpxchg(_p_, _o_, _n_);			\
+		break;							\
+	default:							\
+		BUILD_BUG();						\
+	}								\
+	_prev_;								\
 })
 
-/*
- * atomic_cmpxchg is same as cmpxchg
- *   LLSC: only different in data-type, semantics are exactly same
- *  !LLSC: cmpxchg() has to use an external lock atomic_ops_lock to guarantee
- *         semantics, and this lock also happens to be used by atomic_*()
- */
-#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+#else
 
+#define arch_cmpxchg(ptr, old, new)				        \
+({									\
+	volatile __typeof__(ptr) _p_ = (ptr);				\
+	__typeof__(*(ptr)) _o_ = (old);					\
+	__typeof__(*(ptr)) _n_ = (new);					\
+	__typeof__(*(ptr)) _prev_;					\
+	unsigned long __flags;						\
+									\
+	BUILD_BUG_ON(sizeof(_p_) != 4);					\
+									\
+	/*								\
+	 * spin lock/unlock provide the needed smp_mb() before/after	\
+	 */								\
+	atomic_ops_lock(__flags);					\
+	_prev_ = *_p_;							\
+	if (_prev_ == _o_)						\
+		*_p_ = _n_;						\
+	atomic_ops_unlock(__flags);					\
+	_prev_;								\
+})
+
+#endif
 
 /*
- * xchg (reg with memory) based on "Native atomic" EX insn
+ * xchg
  */
-static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
-				   int size)
-{
-	extern unsigned long __xchg_bad_pointer(void);
-
-	switch (size) {
-	case 4:
-		smp_mb();
-
-		__asm__ __volatile__(
-		"	ex  %0, [%1]	\n"
-		: "+r"(val)
-		: "r"(ptr)
-		: "memory");
+#ifdef CONFIG_ARC_HAS_LLSC
 
-		smp_mb();
+#define __arch_xchg(ptr, val)						\
+({									\
+	__asm__ __volatile__(						\
+	"	ex  %0, [%1]	\n"	/* set new value */	        \
+	: "+r"(val)							\
+	: "r"(ptr)							\
+	: "memory");							\
+	_val_;		/* get old value */				\
+})
 
-		return val;
-	}
-	return __xchg_bad_pointer();
-}
+#define arch_xchg_relaxed(ptr, val)					\
+({									\
+	__typeof__(ptr) _p_ = (ptr);					\
+	__typeof__(*(ptr)) _val_ = (val);				\
+									\
+	switch(sizeof(*(_p_))) {					\
+	case 4:								\
+		_val_ = __arch_xchg(_p_, _val_);			\
+		break;							\
+	default:							\
+		BUILD_BUG();						\
+	}								\
+	_val_;								\
+})
 
-#define _xchg(ptr, with) ((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), \
-						 sizeof(*(ptr))))
+#else  /* !CONFIG_ARC_HAS_LLSC */
 
 /*
- * xchg() maps directly to ARC EX instruction which guarantees atomicity.
- * However in !LLSC config, it also needs to be use @atomic_ops_lock spinlock
- * due to a subtle reason:
- *  - For !LLSC, cmpxchg() needs to use that lock (see above) and there is lot
- *    of  kernel code which calls xchg()/cmpxchg() on same data (see llist.h)
- *    Hence xchg() needs to follow same locking rules.
- *
- * Technically the lock is also needed for UP (boils down to irq save/restore)
- * but we can cheat a bit since cmpxchg() atomic_ops_lock() would cause irqs to
- * be disabled thus can't possibly be interrpted/preempted/clobbered by xchg()
- * Other way around, xchg is one instruction anyways, so can't be interrupted
- * as such
+ * EX instructions is baseline and present in !LLSC too. But in this
+ * regime it still needs use @atomic_ops_lock spinlock to allow interop
+ * with cmpxchg() which uses spinlock in !LLSC
+ * (llist.h use xchg and cmpxchg on sama data)
  */
 
-#if !defined(CONFIG_ARC_HAS_LLSC) && defined(CONFIG_SMP)
-
-#define xchg(ptr, with)			\
-({					\
-	unsigned long flags;		\
-	typeof(*(ptr)) old_val;		\
-					\
-	atomic_ops_lock(flags);		\
-	old_val = _xchg(ptr, with);	\
-	atomic_ops_unlock(flags);	\
-	old_val;			\
+#define arch_xchg(ptr, val)					        \
+({									\
+	__typeof__(ptr) _p_ = (ptr);					\
+	__typeof__(*(ptr)) _val_ = (val);				\
+									\
+	unsigned long __flags;						\
+									\
+	atomic_ops_lock(__flags);					\
+									\
+	__asm__ __volatile__(						\
+	"	ex  %0, [%1]	\n"					\
+	: "+r"(_val_)							\
+	: "r"(_p_)							\
+	: "memory");							\
+									\
+	atomic_ops_unlock(__flags);					\
+	_val_;								\
 })
 
-#else
-
-#define xchg(ptr, with)  _xchg(ptr, with)
-
 #endif
 
-/*
- * "atomic" variant of xchg()
- * REQ: It needs to follow the same serialization rules as other atomic_xxx()
- * Since xchg() doesn't always do that, it would seem that following defintion
- * is incorrect. But here's the rationale:
- *   SMP : Even xchg() takes the atomic_ops_lock, so OK.
- *   LLSC: atomic_ops_lock are not relevant at all (even if SMP, since LLSC
- *         is natively "SMP safe", no serialization required).
- *   UP  : other atomics disable IRQ, so no way a difft ctxt atomic_xchg()
- *         could clobber them. atomic_xchg() itself would be 1 insn, so it
- *         can't be clobbered by others. Thus no serialization required when
- *         atomic_xchg is involved.
- */
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
 #endif
diff --git a/arch/arc/include/asm/dma.h b/arch/arc/include/asm/dma.h
index 5b744f4b10a7..02431027ed2f 100644
--- a/arch/arc/include/asm/dma.h
+++ b/arch/arc/include/asm/dma.h
@@ -7,10 +7,5 @@
 #define ASM_ARC_DMA_H
 
 #define MAX_DMA_ADDRESS 0xC0000000
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy	0
-#endif
 
 #endif
diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h
index 6dbf5cecc8cc..67ff06e15cea 100644
--- a/arch/arc/include/asm/entry-compact.h
+++ b/arch/arc/include/asm/entry-compact.h
@@ -21,7 +21,7 @@
  *      r25 contains the kernel current task ptr
  *  - Defined Stack Switching Macro to be reused in all intr/excp hdlrs
  *  - Shaved off 11 instructions from RESTORE_ALL_INT1 by using the
- *      address Write back load ld.ab instead of seperate ld/add instn
+ *      address Write back load ld.ab instead of separate ld/add instn
  *
  * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
  */
@@ -126,19 +126,11 @@
  * to be saved again on kernel mode stack, as part of pt_regs.
  *-------------------------------------------------------------*/
 .macro PROLOG_FREEUP_REG	reg, mem
-#ifndef ARC_USE_SCRATCH_REG
-	sr  \reg, [ARC_REG_SCRATCH_DATA0]
-#else
 	st  \reg, [\mem]
-#endif
 .endm
 
 .macro PROLOG_RESTORE_REG	reg, mem
-#ifndef ARC_USE_SCRATCH_REG
-	lr  \reg, [ARC_REG_SCRATCH_DATA0]
-#else
 	ld  \reg, [\mem]
-#endif
 .endm
 
 /*--------------------------------------------------------------
diff --git a/arch/arc/include/asm/hugepage.h b/arch/arc/include/asm/hugepage.h
index 4eef17c5c1da..5001b796fb8d 100644
--- a/arch/arc/include/asm/hugepage.h
+++ b/arch/arc/include/asm/hugepage.h
@@ -31,7 +31,6 @@ static inline pmd_t pte_pmd(pte_t pte)
 
 #define pmd_write(pmd)		pte_write(pmd_pte(pmd))
 #define pmd_young(pmd)		pte_young(pmd_pte(pmd))
-#define pmd_pfn(pmd)		pte_pfn(pmd_pte(pmd))
 #define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
 
 #define mk_pmd(page, prot)	pte_pmd(mk_pte(page, prot))
@@ -58,14 +57,6 @@ static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 extern void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
 				 pmd_t *pmd);
 
-/* Generic variants assume pgtable_t is struct page *, hence need for these */
-#define __HAVE_ARCH_PGTABLE_DEPOSIT
-extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
-				       pgtable_t pgtable);
-
-#define __HAVE_ARCH_PGTABLE_WITHDRAW
-extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp);
-
 #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
 extern void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 				unsigned long end);
diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index 8f777d6441a5..80347382a380 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -32,7 +32,7 @@ static inline void ioport_unmap(void __iomem *addr)
 {
 }
 
-extern void iounmap(const void __iomem *addr);
+extern void iounmap(const volatile void __iomem *addr);
 
 /*
  * io{read,write}{16,32}be() macros
diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h
index 863d63ad18d6..0d63e568d64c 100644
--- a/arch/arc/include/asm/irqflags-compact.h
+++ b/arch/arc/include/asm/irqflags-compact.h
@@ -50,8 +50,12 @@
  * are redone after IRQs are re-enabled (and gcc doesn't reuse stale register)
  *
  * Noted at the time of Abilis Timer List corruption
- *	Orig Bug + Rejected solution	: https://lkml.org/lkml/2013/3/29/67
- *	Reasoning			: https://lkml.org/lkml/2013/4/8/15
+ *
+ * Orig Bug + Rejected solution:
+ * https://lore.kernel.org/lkml/1364553218-31255-1-git-send-email-vgupta@synopsys.com
+ *
+ * Reasoning:
+ * https://lore.kernel.org/lkml/CA+55aFyFWjpSVQM6M266tKrG_ZXJzZ-nYejpmXYQXbrr42mGPQ@mail.gmail.com
  *
  ******************************************************************/
 
diff --git a/arch/arc/include/asm/kprobes.h b/arch/arc/include/asm/kprobes.h
index 2134721dce44..de1566e32cb8 100644
--- a/arch/arc/include/asm/kprobes.h
+++ b/arch/arc/include/asm/kprobes.h
@@ -46,7 +46,7 @@ struct kprobe_ctlblk {
 };
 
 int kprobe_fault_handler(struct pt_regs *regs, unsigned long cause);
-void kretprobe_trampoline(void);
+void __kretprobe_trampoline(void);
 void trap_is_kprobe(unsigned long address, struct pt_regs *regs);
 #else
 #define trap_is_kprobe(address, regs)
diff --git a/arch/arc/include/asm/mmu-arcv2.h b/arch/arc/include/asm/mmu-arcv2.h
new file mode 100644
index 000000000000..ed9036d4ede3
--- /dev/null
+++ b/arch/arc/include/asm/mmu-arcv2.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012, 2019-20 Synopsys, Inc. (www.synopsys.com)
+ *
+ * MMUv3 (arc700) / MMUv4 (archs) are software page walked and software managed.
+ * This file contains the TLB access registers and commands
+ */
+
+#ifndef _ASM_ARC_MMU_ARCV2_H
+#define _ASM_ARC_MMU_ARCV2_H
+
+/*
+ * TLB Management regs
+ */
+#define ARC_REG_MMU_BCR		0x06f
+
+#ifdef CONFIG_ARC_MMU_V3
+#define ARC_REG_TLBPD0		0x405
+#define ARC_REG_TLBPD1		0x406
+#define ARC_REG_TLBPD1HI	0	/* Dummy: allows common code */
+#define ARC_REG_TLBINDEX	0x407
+#define ARC_REG_TLBCOMMAND	0x408
+#define ARC_REG_PID		0x409
+#define ARC_REG_SCRATCH_DATA0	0x418
+#else
+#define ARC_REG_TLBPD0		0x460
+#define ARC_REG_TLBPD1		0x461
+#define ARC_REG_TLBPD1HI	0x463
+#define ARC_REG_TLBINDEX	0x464
+#define ARC_REG_TLBCOMMAND	0x465
+#define ARC_REG_PID		0x468
+#define ARC_REG_SCRATCH_DATA0	0x46c
+#endif
+
+/* Bits in MMU PID reg */
+#define __TLB_ENABLE		(1 << 31)
+#define __PROG_ENABLE		(1 << 30)
+#define MMU_ENABLE		(__TLB_ENABLE | __PROG_ENABLE)
+
+/* Bits in TLB Index reg */
+#define TLB_LKUP_ERR		0x80000000
+
+#ifdef CONFIG_ARC_MMU_V3
+#define TLB_DUP_ERR		(TLB_LKUP_ERR | 0x00000001)
+#else
+#define TLB_DUP_ERR		(TLB_LKUP_ERR | 0x40000000)
+#endif
+
+/*
+ * TLB Commands
+ */
+#define TLBWrite    		0x1
+#define TLBRead     		0x2
+#define TLBGetIndex 		0x3
+#define TLBProbe    		0x4
+#define TLBWriteNI		0x5  /* write JTLB without inv uTLBs */
+#define TLBIVUTLB		0x6  /* explicitly inv uTLBs */
+
+#ifdef CONFIG_ARC_MMU_V4
+#define TLBInsertEntry		0x7
+#define TLBDeleteEntry		0x8
+#endif
+
+/* Masks for actual TLB "PD"s */
+#define PTE_BITS_IN_PD0		(_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ)
+#define PTE_BITS_RWX		(_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
+
+#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK_PHYS | _PAGE_CACHEABLE)
+
+#ifndef __ASSEMBLY__
+
+struct mm_struct;
+extern int pae40_exist_but_not_enab(void);
+
+static inline int is_pae40_enabled(void)
+{
+	return IS_ENABLED(CONFIG_ARC_HAS_PAE40);
+}
+
+static inline void mmu_setup_asid(struct mm_struct *mm, unsigned long asid)
+{
+	write_aux_reg(ARC_REG_PID, asid | MMU_ENABLE);
+}
+
+static inline void mmu_setup_pgd(struct mm_struct *mm, void *pgd)
+{
+	/* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */
+#ifdef CONFIG_ISA_ARCV2
+	write_aux_reg(ARC_REG_SCRATCH_DATA0, (unsigned int)pgd);
+#endif
+}
+
+#else
+
+.macro ARC_MMU_REENABLE reg
+	lr \reg, [ARC_REG_PID]
+	or \reg, \reg, MMU_ENABLE
+	sr \reg, [ARC_REG_PID]
+.endm
+
+#endif /* !__ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h
index 26b731d32a2b..ca427c30f70e 100644
--- a/arch/arc/include/asm/mmu.h
+++ b/arch/arc/include/asm/mmu.h
@@ -7,98 +7,15 @@
 #define _ASM_ARC_MMU_H
 
 #ifndef __ASSEMBLY__
-#include <linux/threads.h>	/* NR_CPUS */
-#endif
-
-#if defined(CONFIG_ARC_MMU_V1)
-#define CONFIG_ARC_MMU_VER 1
-#elif defined(CONFIG_ARC_MMU_V2)
-#define CONFIG_ARC_MMU_VER 2
-#elif defined(CONFIG_ARC_MMU_V3)
-#define CONFIG_ARC_MMU_VER 3
-#elif defined(CONFIG_ARC_MMU_V4)
-#define CONFIG_ARC_MMU_VER 4
-#endif
-
-/* MMU Management regs */
-#define ARC_REG_MMU_BCR		0x06f
-#if (CONFIG_ARC_MMU_VER < 4)
-#define ARC_REG_TLBPD0		0x405
-#define ARC_REG_TLBPD1		0x406
-#define ARC_REG_TLBPD1HI	0	/* Dummy: allows code sharing with ARC700 */
-#define ARC_REG_TLBINDEX	0x407
-#define ARC_REG_TLBCOMMAND	0x408
-#define ARC_REG_PID		0x409
-#define ARC_REG_SCRATCH_DATA0	0x418
-#else
-#define ARC_REG_TLBPD0		0x460
-#define ARC_REG_TLBPD1		0x461
-#define ARC_REG_TLBPD1HI	0x463
-#define ARC_REG_TLBINDEX	0x464
-#define ARC_REG_TLBCOMMAND	0x465
-#define ARC_REG_PID		0x468
-#define ARC_REG_SCRATCH_DATA0	0x46c
-#endif
-
-#if defined(CONFIG_ISA_ARCV2) || !defined(CONFIG_SMP)
-#define	ARC_USE_SCRATCH_REG
-#endif
-
-/* Bits in MMU PID register */
-#define __TLB_ENABLE		(1 << 31)
-#define __PROG_ENABLE		(1 << 30)
-#define MMU_ENABLE		(__TLB_ENABLE | __PROG_ENABLE)
-
-/* Error code if probe fails */
-#define TLB_LKUP_ERR		0x80000000
-
-#if (CONFIG_ARC_MMU_VER < 4)
-#define TLB_DUP_ERR	(TLB_LKUP_ERR | 0x00000001)
-#else
-#define TLB_DUP_ERR	(TLB_LKUP_ERR | 0x40000000)
-#endif
-
-/* TLB Commands */
-#define TLBWrite    0x1
-#define TLBRead     0x2
-#define TLBGetIndex 0x3
-#define TLBProbe    0x4
-
-#if (CONFIG_ARC_MMU_VER >= 2)
-#define TLBWriteNI  0x5		/* write JTLB without inv uTLBs */
-#define TLBIVUTLB   0x6		/* explicitly inv uTLBs */
-#else
-#define TLBWriteNI  TLBWrite	/* Not present in hardware, fallback */
-#endif
-
-#if (CONFIG_ARC_MMU_VER >= 4)
-#define TLBInsertEntry	0x7
-#define TLBDeleteEntry	0x8
-#endif
 
-#ifndef __ASSEMBLY__
+#include <linux/threads.h>	/* NR_CPUS */
 
 typedef struct {
 	unsigned long asid[NR_CPUS];	/* 8 bit MMU PID + Generation cycle */
 } mm_context_t;
 
-#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
-void tlb_paranoid_check(unsigned int mm_asid, unsigned long address);
-#else
-#define tlb_paranoid_check(a, b)
 #endif
 
-void arc_mmu_init(void);
-extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
-void read_decode_mmu_bcr(void);
-
-static inline int is_pae40_enabled(void)
-{
-	return IS_ENABLED(CONFIG_ARC_HAS_PAE40);
-}
-
-extern int pae40_exist_but_not_enab(void);
-
-#endif	/* !__ASSEMBLY__ */
+#include <asm/mmu-arcv2.h>
 
 #endif
diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h
index df164066e172..dda471f5f05b 100644
--- a/arch/arc/include/asm/mmu_context.h
+++ b/arch/arc/include/asm/mmu_context.h
@@ -15,22 +15,23 @@
 #ifndef _ASM_ARC_MMU_CONTEXT_H
 #define _ASM_ARC_MMU_CONTEXT_H
 
-#include <asm/arcregs.h>
-#include <asm/tlb.h>
 #include <linux/sched/mm.h>
 
+#include <asm/tlb.h>
 #include <asm-generic/mm_hooks.h>
 
-/*		ARC700 ASID Management
+/*		ARC ASID Management
+ *
+ * MMU tags TLBs with an 8-bit ASID, avoiding need to flush the TLB on
+ * context-switch.
  *
- * ARC MMU provides 8-bit ASID (0..255) to TAG TLB entries, allowing entries
- * with same vaddr (different tasks) to co-exit. This provides for
- * "Fast Context Switch" i.e. no TLB flush on ctxt-switch
+ * ASID is managed per cpu, so task threads across CPUs can have different
+ * ASID. Global ASID management is needed if hardware supports TLB shootdown
+ * and/or shared TLB across cores, which ARC doesn't.
  *
- * Linux assigns each task a unique ASID. A simple round-robin allocation
- * of H/w ASID is done using software tracker @asid_cpu.
- * When it reaches max 255, the allocation cycle starts afresh by flushing
- * the entire TLB and wrapping ASID back to zero.
+ * Each task is assigned unique ASID, with a simple round-robin allocator
+ * tracked in @asid_cpu. When 8-bit value rolls over,a new cycle is started
+ * over from 0, and TLB is flushed
  *
  * A new allocation cycle, post rollover, could potentially reassign an ASID
  * to a different task. Thus the rule is to refresh the ASID in a new cycle.
@@ -93,7 +94,7 @@ static inline void get_new_mmu_context(struct mm_struct *mm)
 	asid_mm(mm, cpu) = asid_cpu(cpu);
 
 set_hw:
-	write_aux_reg(ARC_REG_PID, hw_pid(mm, cpu) | MMU_ENABLE);
+	mmu_setup_asid(mm, hw_pid(mm, cpu));
 
 	local_irq_restore(flags);
 }
@@ -146,10 +147,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	 */
 	cpumask_set_cpu(cpu, mm_cpumask(next));
 
-#ifdef ARC_USE_SCRATCH_REG
-	/* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */
-	write_aux_reg(ARC_REG_SCRATCH_DATA0, next->pgd);
-#endif
+	mmu_setup_pgd(next, next->pgd);
 
 	get_new_mmu_context(next);
 }
diff --git a/arch/arc/include/asm/mmzone.h b/arch/arc/include/asm/mmzone.h
deleted file mode 100644
index b86b9d1e54dc..000000000000
--- a/arch/arc/include/asm/mmzone.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
- */
-
-#ifndef _ASM_ARC_MMZONE_H
-#define _ASM_ARC_MMZONE_H
-
-#ifdef CONFIG_DISCONTIGMEM
-
-extern struct pglist_data node_data[];
-#define NODE_DATA(nid) (&node_data[nid])
-
-static inline int pfn_to_nid(unsigned long pfn)
-{
-	int is_end_low = 1;
-
-	if (IS_ENABLED(CONFIG_ARC_HAS_PAE40))
-		is_end_low = pfn <= virt_to_pfn(0xFFFFFFFFUL);
-
-	/*
-	 * node 0: lowmem:             0x8000_0000   to 0xFFFF_FFFF
-	 * node 1: HIGHMEM w/o  PAE40: 0x0           to 0x7FFF_FFFF
-	 *         HIGHMEM with PAE40: 0x1_0000_0000 to ...
-	 */
-	if (pfn >= ARCH_PFN_OFFSET && is_end_low)
-		return 0;
-
-	return 1;
-}
-
-static inline int pfn_valid(unsigned long pfn)
-{
-	int nid = pfn_to_nid(pfn);
-
-	return (pfn <= node_end_pfn(nid));
-}
-#endif /* CONFIG_DISCONTIGMEM  */
-
-#endif
diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h
index ad9b7fe4dba3..e43fe27ec54d 100644
--- a/arch/arc/include/asm/page.h
+++ b/arch/arc/include/asm/page.h
@@ -7,6 +7,18 @@
 
 #include <uapi/asm/page.h>
 
+#ifdef CONFIG_ARC_HAS_PAE40
+
+#define MAX_POSSIBLE_PHYSMEM_BITS	40
+#define PAGE_MASK_PHYS			(0xff00000000ull | PAGE_MASK)
+
+#else /* CONFIG_ARC_HAS_PAE40 */
+
+#define MAX_POSSIBLE_PHYSMEM_BITS	32
+#define PAGE_MASK_PHYS			PAGE_MASK
+
+#endif /* CONFIG_ARC_HAS_PAE40 */
+
 #ifndef __ASSEMBLY__
 
 #define clear_page(paddr)		memset((paddr), 0, PAGE_SIZE)
@@ -22,57 +34,55 @@ void copy_user_highpage(struct page *to, struct page *from,
 			unsigned long u_vaddr, struct vm_area_struct *vma);
 void clear_user_page(void *to, unsigned long u_vaddr, struct page *page);
 
-#undef STRICT_MM_TYPECHECKS
-
-#ifdef STRICT_MM_TYPECHECKS
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct {
-#ifdef CONFIG_ARC_HAS_PAE40
-	unsigned long long pte;
-#else
-	unsigned long pte;
-#endif
-} pte_t;
 typedef struct {
 	unsigned long pgd;
 } pgd_t;
+
+#define pgd_val(x)	((x).pgd)
+#define __pgd(x)	((pgd_t) { (x) })
+
+#if CONFIG_PGTABLE_LEVELS > 3
+
 typedef struct {
-	unsigned long pgprot;
-} pgprot_t;
+	unsigned long pud;
+} pud_t;
 
-#define pte_val(x)      ((x).pte)
-#define pgd_val(x)      ((x).pgd)
-#define pgprot_val(x)   ((x).pgprot)
+#define pud_val(x)      	((x).pud)
+#define __pud(x)        	((pud_t) { (x) })
 
-#define __pte(x)        ((pte_t) { (x) })
-#define __pgd(x)        ((pgd_t) { (x) })
-#define __pgprot(x)     ((pgprot_t) { (x) })
+#endif
 
-#define pte_pgprot(x) __pgprot(pte_val(x))
+#if CONFIG_PGTABLE_LEVELS > 2
 
-#else /* !STRICT_MM_TYPECHECKS */
+typedef struct {
+	unsigned long pmd;
+} pmd_t;
 
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x)	((pmd_t) { (x) })
+
+#endif
+
+typedef struct {
 #ifdef CONFIG_ARC_HAS_PAE40
-typedef unsigned long long pte_t;
+	unsigned long long pte;
 #else
-typedef unsigned long pte_t;
+	unsigned long pte;
 #endif
-typedef unsigned long pgd_t;
-typedef unsigned long pgprot_t;
+} pte_t;
 
-#define pte_val(x)	(x)
-#define pgd_val(x)	(x)
-#define pgprot_val(x)	(x)
-#define __pte(x)	(x)
-#define __pgd(x)	(x)
-#define __pgprot(x)	(x)
-#define pte_pgprot(x)	(x)
+#define pte_val(x)	((x).pte)
+#define __pte(x)	((pte_t) { (x) })
 
-#endif
+typedef struct {
+	unsigned long pgprot;
+} pgprot_t;
+
+#define pgprot_val(x)	((x).pgprot)
+#define __pgprot(x)	((pgprot_t) { (x) })
+#define pte_pgprot(x)	__pgprot(pte_val(x))
 
-typedef pte_t * pgtable_t;
+typedef struct page *pgtable_t;
 
 /*
  * Use virt_to_pfn with caution:
@@ -99,7 +109,6 @@ extern int pfn_valid(unsigned long pfn);
 #else /* CONFIG_HIGHMEM */
 
 #define ARCH_PFN_OFFSET		virt_to_pfn(CONFIG_LINUX_RAM_BASE)
-#define pfn_valid(pfn)		(((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
 
 #endif /* CONFIG_HIGHMEM */
 
@@ -110,8 +119,8 @@ extern int pfn_valid(unsigned long pfn);
  * virt here means link-address/program-address as embedded in object code.
  * And for ARC, link-addr = physical address
  */
-#define __pa(vaddr)  ((unsigned long)(vaddr))
-#define __va(paddr)  ((void *)((unsigned long)(paddr)))
+#define __pa(vaddr)  		((unsigned long)(vaddr))
+#define __va(paddr)  		((void *)((unsigned long)(paddr)))
 
 #define virt_to_page(kaddr)	pfn_to_page(virt_to_pfn(kaddr))
 #define virt_addr_valid(kaddr)  pfn_valid(virt_to_pfn(kaddr))
diff --git a/arch/arc/include/asm/perf_event.h b/arch/arc/include/asm/perf_event.h
index 30b9ae511ea9..d5719a260864 100644
--- a/arch/arc/include/asm/perf_event.h
+++ b/arch/arc/include/asm/perf_event.h
@@ -63,166 +63,8 @@ struct arc_reg_cc_build {
 
 #define PERF_COUNT_ARC_HW_MAX	(PERF_COUNT_HW_MAX + 8)
 
-/*
- * Some ARC pct quirks:
- *
- * PERF_COUNT_HW_STALLED_CYCLES_BACKEND
- * PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
- *	The ARC 700 can either measure stalls per pipeline stage, or all stalls
- *	combined; for now we assign all stalls to STALLED_CYCLES_BACKEND
- *	and all pipeline flushes (e.g. caused by mispredicts, etc.) to
- *	STALLED_CYCLES_FRONTEND.
- *
- *	We could start multiple performance counters and combine everything
- *	afterwards, but that makes it complicated.
- *
- *	Note that I$ cache misses aren't counted by either of the two!
- */
-
-/*
- * ARC PCT has hardware conditions with fixed "names" but variable "indexes"
- * (based on a specific RTL build)
- * Below is the static map between perf generic/arc specific event_id and
- * h/w condition names.
- * At the time of probe, we loop thru each index and find it's name to
- * complete the mapping of perf event_id to h/w index as latter is needed
- * to program the counter really
- */
-static const char * const arc_pmu_ev_hw_map[] = {
-	/* count cycles */
-	[PERF_COUNT_HW_CPU_CYCLES] = "crun",
-	[PERF_COUNT_HW_REF_CPU_CYCLES] = "crun",
-	[PERF_COUNT_HW_BUS_CYCLES] = "crun",
-
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = "bflush",
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = "bstall",
-
-	/* counts condition */
-	[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
-	/* All jump instructions that are taken */
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmptak",
-#ifdef CONFIG_ISA_ARCV2
-	[PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",
-#else
-	[PERF_COUNT_ARC_BPOK]         = "bpok",	  /* NP-NT, PT-T, PNT-NT */
-	[PERF_COUNT_HW_BRANCH_MISSES] = "bpfail", /* NP-T, PT-NT, PNT-T */
+#ifdef CONFIG_PERF_EVENTS
+#define perf_arch_bpf_user_pt_regs(regs) (struct user_regs_struct *)regs
 #endif
-	[PERF_COUNT_ARC_LDC] = "imemrdc",	/* Instr: mem read cached */
-	[PERF_COUNT_ARC_STC] = "imemwrc",	/* Instr: mem write cached */
-
-	[PERF_COUNT_ARC_DCLM] = "dclm",		/* D-cache Load Miss */
-	[PERF_COUNT_ARC_DCSM] = "dcsm",		/* D-cache Store Miss */
-	[PERF_COUNT_ARC_ICM] = "icm",		/* I-cache Miss */
-	[PERF_COUNT_ARC_EDTLB] = "edtlb",	/* D-TLB Miss */
-	[PERF_COUNT_ARC_EITLB] = "eitlb",	/* I-TLB Miss */
-
-	[PERF_COUNT_HW_CACHE_REFERENCES] = "imemrdc",	/* Instr: mem read cached */
-	[PERF_COUNT_HW_CACHE_MISSES] = "dclm",		/* D-cache Load Miss */
-};
-
-#define C(_x)			PERF_COUNT_HW_CACHE_##_x
-#define CACHE_OP_UNSUPPORTED	0xffff
-
-static const unsigned arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
-	[C(L1D)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCLM,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_STC,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCSM,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= PERF_COUNT_HW_INSTRUCTIONS,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_ICM,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EDTLB,
-		},
-			/* DTLB LD/ST Miss not segregated by h/w*/
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EITLB,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = PERF_COUNT_HW_BRANCH_INSTRUCTIONS,
-			[C(RESULT_MISS)]	= PERF_COUNT_HW_BRANCH_MISSES,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(NODE)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
 
 #endif /* __ASM_PERF_EVENT_H */
diff --git a/arch/arc/include/asm/pgalloc.h b/arch/arc/include/asm/pgalloc.h
index 6147db925248..096b8ef58edb 100644
--- a/arch/arc/include/asm/pgalloc.h
+++ b/arch/arc/include/asm/pgalloc.h
@@ -31,30 +31,32 @@
 
 #include <linux/mm.h>
 #include <linux/log2.h>
+#include <asm-generic/pgalloc.h>
 
 static inline void
 pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
 {
-	pmd_set(pmd, pte);
+	/*
+	 * The cast to long below is OK in 32-bit PAE40 regime with long long pte
+	 * Despite "wider" pte, the pte table needs to be in non-PAE low memory
+	 * as all higher levels can only hold long pointers.
+	 *
+	 * The cast itself is needed given simplistic definition of set_pmd()
+	 */
+	set_pmd(pmd, __pmd((unsigned long)pte));
 }
 
-static inline void
-pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t ptep)
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte_page)
 {
-	pmd_set(pmd, (pte_t *) ptep);
-}
-
-static inline int __get_order_pgd(void)
-{
-	return get_order(PTRS_PER_PGD * sizeof(pgd_t));
+	set_pmd(pmd, __pmd((unsigned long)page_address(pte_page)));
 }
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	int num, num2;
-	pgd_t *ret = (pgd_t *) __get_free_pages(GFP_KERNEL, __get_order_pgd());
+	pgd_t *ret = (pgd_t *) __get_free_page(GFP_KERNEL);
 
 	if (ret) {
+		int num, num2;
 		num = USER_PTRS_PER_PGD + USER_KERNEL_GUTTER / PGDIR_SIZE;
 		memzero(ret, num * sizeof(pgd_t));
 
@@ -68,67 +70,28 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 	return ret;
 }
 
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	free_pages((unsigned long)pgd, __get_order_pgd());
-}
-
-
-/*
- * With software-only page-tables, addr-split for traversal is tweakable and
- * that directly governs how big tables would be at each level.
- * Further, the MMU page size is configurable.
- * Thus we need to programatically assert the size constraint
- * All of this is const math, allowing gcc to do constant folding/propagation.
- */
+#if CONFIG_PGTABLE_LEVELS > 3
 
-static inline int __get_order_pte(void)
+static inline void p4d_populate(struct mm_struct *mm, p4d_t *p4dp, pud_t *pudp)
 {
-	return get_order(PTRS_PER_PTE * sizeof(pte_t));
+	set_p4d(p4dp, __p4d((unsigned long)pudp));
 }
 
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm)
-{
-	pte_t *pte;
+#define __pud_free_tlb(tlb, pmd, addr)  pud_free((tlb)->mm, pmd)
 
-	pte = (pte_t *) __get_free_pages(GFP_KERNEL | __GFP_ZERO,
-					 __get_order_pte());
+#endif
 
-	return pte;
-}
+#if CONFIG_PGTABLE_LEVELS > 2
 
-static inline pgtable_t
-pte_alloc_one(struct mm_struct *mm)
+static inline void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmdp)
 {
-	pgtable_t pte_pg;
-	struct page *page;
-
-	pte_pg = (pgtable_t)__get_free_pages(GFP_KERNEL, __get_order_pte());
-	if (!pte_pg)
-		return 0;
-	memzero((void *)pte_pg, PTRS_PER_PTE * sizeof(pte_t));
-	page = virt_to_page(pte_pg);
-	if (!pgtable_pte_page_ctor(page)) {
-		__free_page(page);
-		return 0;
-	}
-
-	return pte_pg;
+	set_pud(pudp, __pud((unsigned long)pmdp));
 }
 
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	free_pages((unsigned long)pte, __get_order_pte()); /* takes phy addr */
-}
+#define __pmd_free_tlb(tlb, pmd, addr)  pmd_free((tlb)->mm, pmd)
 
-static inline void pte_free(struct mm_struct *mm, pgtable_t ptep)
-{
-	pgtable_pte_page_dtor(virt_to_page(ptep));
-	free_pages((unsigned long)ptep, __get_order_pte());
-}
+#endif
 
 #define __pte_free_tlb(tlb, pte, addr)  pte_free((tlb)->mm, pte)
 
-#define pmd_pgtable(pmd)	((pgtable_t) pmd_page_vaddr(pmd))
-
 #endif /* _ASM_ARC_PGALLOC_H */
diff --git a/arch/arc/include/asm/pgtable-bits-arcv2.h b/arch/arc/include/asm/pgtable-bits-arcv2.h
new file mode 100644
index 000000000000..6e9f8ca6d6a1
--- /dev/null
+++ b/arch/arc/include/asm/pgtable-bits-arcv2.h
@@ -0,0 +1,149 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * page table flags for software walked/managed MMUv3 (ARC700) and MMUv4 (HS)
+ * There correspond to the corresponding bits in the TLB
+ */
+
+#ifndef _ASM_ARC_PGTABLE_BITS_ARCV2_H
+#define _ASM_ARC_PGTABLE_BITS_ARCV2_H
+
+#ifdef CONFIG_ARC_CACHE_PAGES
+#define _PAGE_CACHEABLE		(1 << 0)  /* Cached (H) */
+#else
+#define _PAGE_CACHEABLE		0
+#endif
+
+#define _PAGE_EXECUTE		(1 << 1)  /* User Execute  (H) */
+#define _PAGE_WRITE		(1 << 2)  /* User Write    (H) */
+#define _PAGE_READ		(1 << 3)  /* User Read     (H) */
+#define _PAGE_ACCESSED		(1 << 4)  /* Accessed      (s) */
+#define _PAGE_DIRTY		(1 << 5)  /* Modified      (s) */
+#define _PAGE_SPECIAL		(1 << 6)
+#define _PAGE_GLOBAL		(1 << 8)  /* ASID agnostic (H) */
+#define _PAGE_PRESENT		(1 << 9)  /* PTE/TLB Valid (H) */
+
+/* We borrow bit 5 to store the exclusive marker in swap PTEs. */
+#define _PAGE_SWP_EXCLUSIVE	_PAGE_DIRTY
+
+#ifdef CONFIG_ARC_MMU_V4
+#define _PAGE_HW_SZ		(1 << 10)  /* Normal/super (H) */
+#else
+#define _PAGE_HW_SZ		0
+#endif
+
+/* Defaults for every user page */
+#define ___DEF		(_PAGE_PRESENT | _PAGE_CACHEABLE)
+
+/* Set of bits not changed in pte_modify */
+#define _PAGE_CHG_MASK	(PAGE_MASK_PHYS | _PAGE_ACCESSED | _PAGE_DIRTY | \
+							   _PAGE_SPECIAL)
+
+/* More Abbrevaited helpers */
+#define PAGE_U_NONE     __pgprot(___DEF)
+#define PAGE_U_R        __pgprot(___DEF | _PAGE_READ)
+#define PAGE_U_W_R      __pgprot(___DEF | _PAGE_READ | _PAGE_WRITE)
+#define PAGE_U_X_R      __pgprot(___DEF | _PAGE_READ | _PAGE_EXECUTE)
+#define PAGE_U_X_W_R    __pgprot(___DEF \
+				| _PAGE_READ | _PAGE_WRITE | _PAGE_EXECUTE)
+#define PAGE_KERNEL     __pgprot(___DEF | _PAGE_GLOBAL \
+				| _PAGE_READ | _PAGE_WRITE | _PAGE_EXECUTE)
+
+#define PAGE_SHARED	PAGE_U_W_R
+
+#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) & ~_PAGE_CACHEABLE))
+
+/*
+ * Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
+ *
+ * Certain cases have 1:1 mapping
+ *  e.g. __P101 means VM_READ, VM_EXEC and !VM_SHARED
+ *       which directly corresponds to  PAGE_U_X_R
+ *
+ * Other rules which cause the divergence from 1:1 mapping
+ *
+ *  1. Although ARC700 can do exclusive execute/write protection (meaning R
+ *     can be tracked independet of X/W unlike some other CPUs), still to
+ *     keep things consistent with other archs:
+ *      -Write implies Read:   W => R
+ *      -Execute implies Read: X => R
+ *
+ *  2. Pvt Writable doesn't have Write Enabled initially: Pvt-W => !W
+ *     This is to enable COW mechanism
+ */
+	/* xwr */
+#ifndef __ASSEMBLY__
+
+#define pte_write(pte)		(pte_val(pte) & _PAGE_WRITE)
+#define pte_dirty(pte)		(pte_val(pte) & _PAGE_DIRTY)
+#define pte_young(pte)		(pte_val(pte) & _PAGE_ACCESSED)
+#define pte_special(pte)	(pte_val(pte) & _PAGE_SPECIAL)
+
+#define PTE_BIT_FUNC(fn, op) \
+	static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
+
+PTE_BIT_FUNC(mknotpresent,     &= ~(_PAGE_PRESENT));
+PTE_BIT_FUNC(wrprotect,	&= ~(_PAGE_WRITE));
+PTE_BIT_FUNC(mkwrite,	|= (_PAGE_WRITE));
+PTE_BIT_FUNC(mkclean,	&= ~(_PAGE_DIRTY));
+PTE_BIT_FUNC(mkdirty,	|= (_PAGE_DIRTY));
+PTE_BIT_FUNC(mkold,	&= ~(_PAGE_ACCESSED));
+PTE_BIT_FUNC(mkyoung,	|= (_PAGE_ACCESSED));
+PTE_BIT_FUNC(mkspecial,	|= (_PAGE_SPECIAL));
+PTE_BIT_FUNC(mkhuge,	|= (_PAGE_HW_SZ));
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pteval)
+{
+	set_pte(ptep, pteval);
+}
+
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
+		      pte_t *ptep);
+
+/*
+ * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that
+ * are !pte_none() && !pte_present().
+ *
+ * Format of swap PTEs:
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <-------------- offset -------------> <--- zero --> E < type ->
+ *
+ *   E is the exclusive marker that is not stored in swap entries.
+ *   The zero'ed bits include _PAGE_PRESENT.
+ */
+#define __swp_entry(type, off)		((swp_entry_t) \
+					{ ((type) & 0x1f) | ((off) << 13) })
+
+/* Decode a PTE containing swap "identifier "into constituents */
+#define __swp_type(pte_lookalike)	(((pte_lookalike).val) & 0x1f)
+#define __swp_offset(pte_lookalike)	((pte_lookalike).val >> 13)
+
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+static inline int pte_swp_exclusive(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
+}
+
+PTE_BIT_FUNC(swp_mkexclusive, |= (_PAGE_SWP_EXCLUSIVE));
+PTE_BIT_FUNC(swp_clear_exclusive, &= ~(_PAGE_SWP_EXCLUSIVE));
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#include <asm/hugepage.h>
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/pgtable-levels.h b/arch/arc/include/asm/pgtable-levels.h
new file mode 100644
index 000000000000..ef68758b69f7
--- /dev/null
+++ b/arch/arc/include/asm/pgtable-levels.h
@@ -0,0 +1,187 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Helpers for implemenintg paging levels
+ */
+
+#ifndef _ASM_ARC_PGTABLE_LEVELS_H
+#define _ASM_ARC_PGTABLE_LEVELS_H
+
+#if CONFIG_PGTABLE_LEVELS == 2
+
+/*
+ * 2 level paging setup for software walked MMUv3 (ARC700) and MMUv4 (HS)
+ *
+ * [31]            32 bit virtual address              [0]
+ * -------------------------------------------------------
+ * |               | <---------- PGDIR_SHIFT ----------> |
+ * |               |                | <-- PAGE_SHIFT --> |
+ * -------------------------------------------------------
+ *       |                  |                |
+ *       |                  |                --> off in page frame
+ *       |                  ---> index into Page Table
+ *       ----> index into Page Directory
+ *
+ * Given software walk, the vaddr split is arbitrary set to 11:8:13
+ * However enabling of super page in a 2 level regime pegs PGDIR_SHIFT to
+ * super page size.
+ */
+
+#if defined(CONFIG_ARC_HUGEPAGE_16M)
+#define PGDIR_SHIFT		24
+#elif defined(CONFIG_ARC_HUGEPAGE_2M)
+#define PGDIR_SHIFT		21
+#else
+/*
+ * No Super page case
+ * Default value provides 11:8:13 (8K), 10:10:12 (4K)
+ * Limits imposed by pgtable_t only PAGE_SIZE long
+ * (so 4K page can only have 1K entries: or 10 bits)
+ */
+#ifdef CONFIG_ARC_PAGE_SIZE_4K
+#define PGDIR_SHIFT		22
+#else
+#define PGDIR_SHIFT		21
+#endif
+
+#endif
+
+#else /* CONFIG_PGTABLE_LEVELS != 2 */
+
+/*
+ * A default 3 level paging testing setup in software walked MMU
+ *   MMUv4 (8K page): <4> : <7> : <8> : <13>
+ * A default 4 level paging testing setup in software walked MMU
+ *   MMUv4 (8K page): <4> : <3> : <4> : <8> : <13>
+ */
+#define PGDIR_SHIFT		28
+#if CONFIG_PGTABLE_LEVELS > 3
+#define PUD_SHIFT		25
+#endif
+#if CONFIG_PGTABLE_LEVELS > 2
+#define PMD_SHIFT		21
+#endif
+
+#endif /* CONFIG_PGTABLE_LEVELS */
+
+#define PGDIR_SIZE		BIT(PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE - 1))
+#define PTRS_PER_PGD		BIT(32 - PGDIR_SHIFT)
+
+#if CONFIG_PGTABLE_LEVELS > 3
+#define PUD_SIZE		BIT(PUD_SHIFT)
+#define PUD_MASK		(~(PUD_SIZE - 1))
+#define PTRS_PER_PUD		BIT(PGDIR_SHIFT - PUD_SHIFT)
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 2
+#define PMD_SIZE		BIT(PMD_SHIFT)
+#define PMD_MASK		(~(PMD_SIZE - 1))
+#define PTRS_PER_PMD		BIT(PUD_SHIFT - PMD_SHIFT)
+#endif
+
+#define PTRS_PER_PTE		BIT(PMD_SHIFT - PAGE_SHIFT)
+
+#ifndef __ASSEMBLY__
+
+#if CONFIG_PGTABLE_LEVELS > 3
+#include <asm-generic/pgtable-nop4d.h>
+#elif CONFIG_PGTABLE_LEVELS > 2
+#include <asm-generic/pgtable-nopud.h>
+#else
+#include <asm-generic/pgtable-nopmd.h>
+#endif
+
+/*
+ * 1st level paging: pgd
+ */
+#define pgd_ERROR(e) \
+	pr_crit("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+#if CONFIG_PGTABLE_LEVELS > 3
+
+/* In 4 level paging, p4d_* macros work on pgd */
+#define p4d_none(x)		(!p4d_val(x))
+#define p4d_bad(x)		((p4d_val(x) & ~PAGE_MASK))
+#define p4d_present(x)		(p4d_val(x))
+#define p4d_clear(xp)		do { p4d_val(*(xp)) = 0; } while (0)
+#define p4d_pgtable(p4d)	((pud_t *)(p4d_val(p4d) & PAGE_MASK))
+#define p4d_page(p4d)		virt_to_page(p4d_pgtable(p4d))
+#define set_p4d(p4dp, p4d)	(*(p4dp) = p4d)
+
+/*
+ * 2nd level paging: pud
+ */
+#define pud_ERROR(e) \
+	pr_crit("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
+
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 2
+
+/*
+ * In 3 level paging, pud_* macros work on pgd
+ * In 4 level paging, pud_* macros work on pud
+ */
+#define pud_none(x)		(!pud_val(x))
+#define pud_bad(x)		((pud_val(x) & ~PAGE_MASK))
+#define pud_present(x)		(pud_val(x))
+#define pud_clear(xp)		do { pud_val(*(xp)) = 0; } while (0)
+#define pud_pgtable(pud)	((pmd_t *)(pud_val(pud) & PAGE_MASK))
+#define pud_page(pud)		virt_to_page(pud_pgtable(pud))
+#define set_pud(pudp, pud)	(*(pudp) = pud)
+
+/*
+ * 3rd level paging: pmd
+ */
+#define pmd_ERROR(e) \
+	pr_crit("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+
+#define pmd_pfn(pmd)		((pmd_val(pmd) & PMD_MASK) >> PAGE_SHIFT)
+#define pfn_pmd(pfn,prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
+
+#endif
+
+/*
+ * Due to the strange way generic pgtable level folding works, the pmd_* macros
+ *  - are valid even for 2 levels (which supposedly only has pgd - pte)
+ *  - behave differently for 2 vs. 3
+ * In 2  level paging        (pgd -> pte), pmd_* macros work on pgd
+ * In 3+ level paging (pgd -> pmd -> pte), pmd_* macros work on pmd
+ */
+#define pmd_none(x)		(!pmd_val(x))
+#define pmd_bad(x)		((pmd_val(x) & ~PAGE_MASK))
+#define pmd_present(x)		(pmd_val(x))
+#define pmd_clear(xp)		do { pmd_val(*(xp)) = 0; } while (0)
+#define pmd_page_vaddr(pmd)	(pmd_val(pmd) & PAGE_MASK)
+#define pmd_pfn(pmd)		((pmd_val(pmd) & PAGE_MASK) >> PAGE_SHIFT)
+#define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
+#define set_pmd(pmdp, pmd)	(*(pmdp) = pmd)
+#define pmd_pgtable(pmd)	((pgtable_t) pmd_page(pmd))
+
+/*
+ * 4th level paging: pte
+ */
+#define pte_ERROR(e) \
+	pr_crit("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+
+#define pte_none(x)		(!pte_val(x))
+#define pte_present(x)		(pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,ptep)	set_pte_at(mm, addr, ptep, __pte(0))
+#define pte_page(pte)		pfn_to_page(pte_pfn(pte))
+#define set_pte(ptep, pte)	((*(ptep)) = (pte))
+#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn, prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
+#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
+
+#ifdef CONFIG_ISA_ARCV2
+#define pmd_leaf(x)		(pmd_val(x) & _PAGE_HW_SZ)
+#endif
+
+#endif	/* !__ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
index 163641726a2b..4cf45a99fd79 100644
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -1,226 +1,17 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * vineetg: May 2011
- *  -Folded PAGE_PRESENT (used by VM) and PAGE_VALID (used by MMU) into 1.
- *     They are semantically the same although in different contexts
- *     VALID marks a TLB entry exists and it will only happen if PRESENT
- *  - Utilise some unused free bits to confine PTE flags to 12 bits
- *     This is a must for 4k pg-sz
- *
- * vineetg: Mar 2011 - changes to accommodate MMU TLB Page Descriptor mods
- *  -TLB Locking never really existed, except for initial specs
- *  -SILENT_xxx not needed for our port
- *  -Per my request, MMU V3 changes the layout of some of the bits
- *     to avoid a few shifts in TLB Miss handlers.
- *
- * vineetg: April 2010
- *  -PGD entry no longer contains any flags. If empty it is 0, otherwise has
- *   Pg-Tbl ptr. Thus pmd_present(), pmd_valid(), pmd_set( ) become simpler
- *
- * vineetg: April 2010
- *  -Switched form 8:11:13 split for page table lookup to 11:8:13
- *  -this speeds up page table allocation itself as we now have to memset 1K
- *    instead of 8k per page table.
- * -TODO: Right now page table alloc is 8K and rest 7K is unused
- *    need to optimise it
- *
- * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
  */
 
 #ifndef _ASM_ARC_PGTABLE_H
 #define _ASM_ARC_PGTABLE_H
 
 #include <linux/bits.h>
-#include <asm-generic/pgtable-nopmd.h>
-#include <asm/page.h>
-#include <asm/mmu.h>	/* to propagate CONFIG_ARC_MMU_VER <n> */
-
-/**************************************************************************
- * Page Table Flags
- *
- * ARC700 MMU only deals with softare managed TLB entries.
- * Page Tables are purely for Linux VM's consumption and the bits below are
- * suited to that (uniqueness). Hence some are not implemented in the TLB and
- * some have different value in TLB.
- * e.g. MMU v2: K_READ bit is 8 and so is GLOBAL (possible because they live in
- *      seperate PD0 and PD1, which combined forms a translation entry)
- *      while for PTE perspective, they are 8 and 9 respectively
- * with MMU v3: Most bits (except SHARED) represent the exact hardware pos
- *      (saves some bit shift ops in TLB Miss hdlrs)
- */
-
-#if (CONFIG_ARC_MMU_VER <= 2)
-
-#define _PAGE_ACCESSED      (1<<1)	/* Page is accessed (S) */
-#define _PAGE_CACHEABLE     (1<<2)	/* Page is cached (H) */
-#define _PAGE_EXECUTE       (1<<3)	/* Page has user execute perm (H) */
-#define _PAGE_WRITE         (1<<4)	/* Page has user write perm (H) */
-#define _PAGE_READ          (1<<5)	/* Page has user read perm (H) */
-#define _PAGE_DIRTY         (1<<6)	/* Page modified (dirty) (S) */
-#define _PAGE_SPECIAL       (1<<7)
-#define _PAGE_GLOBAL        (1<<8)	/* Page is global (H) */
-#define _PAGE_PRESENT       (1<<10)	/* TLB entry is valid (H) */
-
-#else	/* MMU v3 onwards */
-
-#define _PAGE_CACHEABLE     (1<<0)	/* Page is cached (H) */
-#define _PAGE_EXECUTE       (1<<1)	/* Page has user execute perm (H) */
-#define _PAGE_WRITE         (1<<2)	/* Page has user write perm (H) */
-#define _PAGE_READ          (1<<3)	/* Page has user read perm (H) */
-#define _PAGE_ACCESSED      (1<<4)	/* Page is accessed (S) */
-#define _PAGE_DIRTY         (1<<5)	/* Page modified (dirty) (S) */
-#define _PAGE_SPECIAL       (1<<6)
-
-#if (CONFIG_ARC_MMU_VER >= 4)
-#define _PAGE_WTHRU         (1<<7)	/* Page cache mode write-thru (H) */
-#endif
-
-#define _PAGE_GLOBAL        (1<<8)	/* Page is global (H) */
-#define _PAGE_PRESENT       (1<<9)	/* TLB entry is valid (H) */
-
-#if (CONFIG_ARC_MMU_VER >= 4)
-#define _PAGE_HW_SZ         (1<<10)	/* Page Size indicator (H): 0 normal, 1 super */
-#endif
-
-#define _PAGE_SHARED_CODE   (1<<11)	/* Shared Code page with cmn vaddr
-					   usable for shared TLB entries (H) */
-
-#define _PAGE_UNUSED_BIT    (1<<12)
-#endif
-
-/* vmalloc permissions */
-#define _K_PAGE_PERMS  (_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \
-			_PAGE_GLOBAL | _PAGE_PRESENT)
-
-#ifndef CONFIG_ARC_CACHE_PAGES
-#undef _PAGE_CACHEABLE
-#define _PAGE_CACHEABLE 0
-#endif
-
-#ifndef _PAGE_HW_SZ
-#define _PAGE_HW_SZ	0
-#endif
-
-/* Defaults for every user page */
-#define ___DEF (_PAGE_PRESENT | _PAGE_CACHEABLE)
-
-/* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_SPECIAL)
-
-/* More Abbrevaited helpers */
-#define PAGE_U_NONE     __pgprot(___DEF)
-#define PAGE_U_R        __pgprot(___DEF | _PAGE_READ)
-#define PAGE_U_W_R      __pgprot(___DEF | _PAGE_READ | _PAGE_WRITE)
-#define PAGE_U_X_R      __pgprot(___DEF | _PAGE_READ | _PAGE_EXECUTE)
-#define PAGE_U_X_W_R    __pgprot(___DEF | _PAGE_READ | _PAGE_WRITE | \
-						       _PAGE_EXECUTE)
-
-#define PAGE_SHARED	PAGE_U_W_R
-
-/* While kernel runs out of unstranslated space, vmalloc/modules use a chunk of
- * user vaddr space - visible in all addr spaces, but kernel mode only
- * Thus Global, all-kernel-access, no-user-access, cached
- */
-#define PAGE_KERNEL          __pgprot(_K_PAGE_PERMS | _PAGE_CACHEABLE)
-
-/* ioremap */
-#define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS)
-
-/* Masks for actual TLB "PD"s */
-#define PTE_BITS_IN_PD0		(_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ)
-#define PTE_BITS_RWX		(_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
-
-#ifdef CONFIG_ARC_HAS_PAE40
-#define PTE_BITS_NON_RWX_IN_PD1	(0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
-#define MAX_POSSIBLE_PHYSMEM_BITS 40
-#else
-#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE)
-#define MAX_POSSIBLE_PHYSMEM_BITS 32
-#endif
-
-/**************************************************************************
- * Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
- *
- * Certain cases have 1:1 mapping
- *  e.g. __P101 means VM_READ, VM_EXEC and !VM_SHARED
- *       which directly corresponds to  PAGE_U_X_R
- *
- * Other rules which cause the divergence from 1:1 mapping
- *
- *  1. Although ARC700 can do exclusive execute/write protection (meaning R
- *     can be tracked independet of X/W unlike some other CPUs), still to
- *     keep things consistent with other archs:
- *      -Write implies Read:   W => R
- *      -Execute implies Read: X => R
- *
- *  2. Pvt Writable doesn't have Write Enabled initially: Pvt-W => !W
- *     This is to enable COW mechanism
- */
-	/* xwr */
-#define __P000  PAGE_U_NONE
-#define __P001  PAGE_U_R
-#define __P010  PAGE_U_R	/* Pvt-W => !W */
-#define __P011  PAGE_U_R	/* Pvt-W => !W */
-#define __P100  PAGE_U_X_R	/* X => R */
-#define __P101  PAGE_U_X_R
-#define __P110  PAGE_U_X_R	/* Pvt-W => !W and X => R */
-#define __P111  PAGE_U_X_R	/* Pvt-W => !W */
-
-#define __S000  PAGE_U_NONE
-#define __S001  PAGE_U_R
-#define __S010  PAGE_U_W_R	/* W => R */
-#define __S011  PAGE_U_W_R
-#define __S100  PAGE_U_X_R	/* X => R */
-#define __S101  PAGE_U_X_R
-#define __S110  PAGE_U_X_W_R	/* X => R */
-#define __S111  PAGE_U_X_W_R
-
-/****************************************************************
- * 2 tier (PGD:PTE) software page walker
- *
- * [31]		    32 bit virtual address              [0]
- * -------------------------------------------------------
- * |               | <------------ PGDIR_SHIFT ----------> |
- * |		   |					 |
- * | BITS_FOR_PGD  |  BITS_FOR_PTE  | <-- PAGE_SHIFT --> |
- * -------------------------------------------------------
- *       |                  |                |
- *       |                  |                --> off in page frame
- *       |                  ---> index into Page Table
- *       ----> index into Page Directory
- *
- * In a single page size configuration, only PAGE_SHIFT is fixed
- * So both PGD and PTE sizing can be tweaked
- *  e.g. 8K page (PAGE_SHIFT 13) can have
- *  - PGDIR_SHIFT 21  -> 11:8:13 address split
- *  - PGDIR_SHIFT 24  -> 8:11:13 address split
- *
- * If Super Page is configured, PGDIR_SHIFT becomes fixed too,
- * so the sizing flexibility is gone.
- */
-
-#if defined(CONFIG_ARC_HUGEPAGE_16M)
-#define PGDIR_SHIFT	24
-#elif defined(CONFIG_ARC_HUGEPAGE_2M)
-#define PGDIR_SHIFT	21
-#else
-/*
- * Only Normal page support so "hackable" (see comment above)
- * Default value provides 11:8:13 (8K), 11:9:12 (4K)
- */
-#define PGDIR_SHIFT	21
-#endif
-
-#define BITS_FOR_PTE	(PGDIR_SHIFT - PAGE_SHIFT)
-#define BITS_FOR_PGD	(32 - PGDIR_SHIFT)
-
-#define PGDIR_SIZE	BIT(PGDIR_SHIFT)	/* vaddr span, not PDG sz */
-#define PGDIR_MASK	(~(PGDIR_SIZE-1))
 
-#define	PTRS_PER_PTE	BIT(BITS_FOR_PTE)
-#define	PTRS_PER_PGD	BIT(BITS_FOR_PGD)
+#include <asm/pgtable-levels.h>
+#include <asm/pgtable-bits-arcv2.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
 
 /*
  * Number of entries a user land program use.
@@ -228,147 +19,12 @@
  */
 #define	USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
 
-/*
- * No special requirements for lowest virtual address we permit any user space
- * mapping to be mapped at.
- */
-#define FIRST_USER_ADDRESS      0UL
-
-
-/****************************************************************
- * Bucket load of VM Helpers
- */
-
 #ifndef __ASSEMBLY__
 
-#define pte_ERROR(e) \
-	pr_crit("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pgd_ERROR(e) \
-	pr_crit("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-/* the zero page used for uninitialized and anonymous pages */
 extern char empty_zero_page[PAGE_SIZE];
 #define ZERO_PAGE(vaddr)	(virt_to_page(empty_zero_page))
 
-#define set_pte(pteptr, pteval)	((*(pteptr)) = (pteval))
-#define set_pmd(pmdptr, pmdval)	(*(pmdptr) = pmdval)
-
-/* find the page descriptor of the Page Tbl ref by PMD entry */
-#define pmd_page(pmd)		virt_to_page(pmd_val(pmd) & PAGE_MASK)
-
-/* find the logical addr (phy for ARC) of the Page Tbl ref by PMD entry */
-#define pmd_page_vaddr(pmd)	(pmd_val(pmd) & PAGE_MASK)
-
-/* In a 2 level sys, setup the PGD entry with PTE value */
-static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
-{
-	pmd_val(*pmdp) = (unsigned long)ptep;
-}
-
-#define pte_none(x)			(!pte_val(x))
-#define pte_present(x)			(pte_val(x) & _PAGE_PRESENT)
-#define pte_clear(mm, addr, ptep)	set_pte_at(mm, addr, ptep, __pte(0))
-
-#define pmd_none(x)			(!pmd_val(x))
-#define	pmd_bad(x)			((pmd_val(x) & ~PAGE_MASK))
-#define pmd_present(x)			(pmd_val(x))
-#define pmd_leaf(x)			(pmd_val(x) & _PAGE_HW_SZ)
-#define pmd_clear(xp)			do { pmd_val(*(xp)) = 0; } while (0)
-
-#define pte_page(pte)		pfn_to_page(pte_pfn(pte))
-#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
-#define pfn_pte(pfn, prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
-
-/* Don't use virt_to_pfn for macros below: could cause truncations for PAE40*/
-#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
-
-/* Zoo of pte_xxx function */
-#define pte_read(pte)		(pte_val(pte) & _PAGE_READ)
-#define pte_write(pte)		(pte_val(pte) & _PAGE_WRITE)
-#define pte_dirty(pte)		(pte_val(pte) & _PAGE_DIRTY)
-#define pte_young(pte)		(pte_val(pte) & _PAGE_ACCESSED)
-#define pte_special(pte)	(pte_val(pte) & _PAGE_SPECIAL)
-
-#define PTE_BIT_FUNC(fn, op) \
-	static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
-
-PTE_BIT_FUNC(mknotpresent,	&= ~(_PAGE_PRESENT));
-PTE_BIT_FUNC(wrprotect,	&= ~(_PAGE_WRITE));
-PTE_BIT_FUNC(mkwrite,	|= (_PAGE_WRITE));
-PTE_BIT_FUNC(mkclean,	&= ~(_PAGE_DIRTY));
-PTE_BIT_FUNC(mkdirty,	|= (_PAGE_DIRTY));
-PTE_BIT_FUNC(mkold,	&= ~(_PAGE_ACCESSED));
-PTE_BIT_FUNC(mkyoung,	|= (_PAGE_ACCESSED));
-PTE_BIT_FUNC(exprotect,	&= ~(_PAGE_EXECUTE));
-PTE_BIT_FUNC(mkexec,	|= (_PAGE_EXECUTE));
-PTE_BIT_FUNC(mkspecial,	|= (_PAGE_SPECIAL));
-PTE_BIT_FUNC(mkhuge,	|= (_PAGE_HW_SZ));
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
-}
-
-/* Macro to mark a page protection as uncacheable */
-#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) & ~_PAGE_CACHEABLE))
-
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep, pte_t pteval)
-{
-	set_pte(ptep, pteval);
-}
-
-/*
- * Macro to quickly access the PGD entry, utlising the fact that some
- * arch may cache the pointer to Page Directory of "current" task
- * in a MMU register
- *
- * Thus task->mm->pgd (3 pointer dereferences, cache misses etc simply
- * becomes read a register
- *
- * ********CAUTION*******:
- * Kernel code might be dealing with some mm_struct of NON "current"
- * Thus use this macro only when you are certain that "current" is current
- * e.g. when dealing with signal frame setup code etc
- */
-#ifdef ARC_USE_SCRATCH_REG
-#define pgd_offset_fast(mm, addr)	\
-({					\
-	pgd_t *pgd_base = (pgd_t *) read_aux_reg(ARC_REG_SCRATCH_DATA0);  \
-	pgd_base + pgd_index(addr);	\
-})
-#else
-#define pgd_offset_fast(mm, addr)	pgd_offset(mm, addr)
-#endif
-
 extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE);
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
-		      pte_t *ptep);
-
-/* Encode swap {type,off} tuple into PTE
- * We reserve 13 bits for 5-bit @type, keeping bits 12-5 zero, ensuring that
- * PAGE_PRESENT is zero in a PTE holding swap "identifier"
- */
-#define __swp_entry(type, off)	((swp_entry_t) { \
-					((type) & 0x1f) | ((off) << 13) })
-
-/* Decode a PTE containing swap "identifier "into constituents */
-#define __swp_type(pte_lookalike)	(((pte_lookalike).val) & 0x1f)
-#define __swp_offset(pte_lookalike)	((pte_lookalike).val >> 13)
-
-/* NOPs, to keep generic kernel happy */
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-#define kern_addr_valid(addr)	(1)
-
-/*
- * remap a physical page `pfn' of size `size' with page protection `prot'
- * into virtual address `from'
- */
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-#include <asm/hugepage.h>
-#endif
 
 /* to cope with aliasing VIPT cache */
 #define HAVE_ARCH_UNMAPPED_AREA
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index e4031ecd3c8c..fb844fce1ab6 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -43,9 +43,6 @@ struct task_struct;
 #define task_pt_regs(p) \
 	((struct pt_regs *)(THREAD_SIZE + (void *)task_stack_page(p)) - 1)
 
-/* Free all resources held by a thread */
-#define release_thread(thread) do { } while (0)
-
 /*
  * A lot of busy-wait loops in SMP are based off of non-volatile data otherwise
  * get optimised away by gcc
@@ -70,7 +67,7 @@ struct task_struct;
 extern void start_thread(struct pt_regs * regs, unsigned long pc,
 			 unsigned long usp);
 
-extern unsigned int get_wchan(struct task_struct *p);
+extern unsigned int __get_wchan(struct task_struct *p);
 
 #endif /* !__ASSEMBLY__ */
 
@@ -93,7 +90,7 @@ extern unsigned int get_wchan(struct task_struct *p);
 #define VMALLOC_START	(PAGE_OFFSET - (CONFIG_ARC_KVADDR_SIZE << 20))
 
 /* 1 PGDIR_SIZE each for fixmap/pkmap, 2 PGDIR_SIZE gutter (see asm/highmem.h) */
-#define VMALLOC_SIZE	((CONFIG_ARC_KVADDR_SIZE << 20) - PGDIR_SIZE * 4)
+#define VMALLOC_SIZE	((CONFIG_ARC_KVADDR_SIZE << 20) - PMD_SIZE * 4)
 
 #define VMALLOC_END	(VMALLOC_START + VMALLOC_SIZE)
 
diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h
index 4c3c9be5bd16..5869a74c0db2 100644
--- a/arch/arc/include/asm/ptrace.h
+++ b/arch/arc/include/asm/ptrace.h
@@ -8,6 +8,7 @@
 #define __ASM_ARC_PTRACE_H
 
 #include <uapi/asm/ptrace.h>
+#include <linux/compiler.h>
 
 #ifndef __ASSEMBLY__
 
@@ -54,6 +55,9 @@ struct pt_regs {
 
 	unsigned long user_r25;
 };
+
+#define MAX_REG_OFFSET offsetof(struct pt_regs, user_r25)
+
 #else
 
 struct pt_regs {
@@ -102,6 +106,8 @@ struct pt_regs {
 	unsigned long status32;
 };
 
+#define MAX_REG_OFFSET offsetof(struct pt_regs, status32)
+
 #endif
 
 /* Callee saved registers - need to be saved only when you are scheduled out */
@@ -149,6 +155,32 @@ static inline long regs_return_value(struct pt_regs *regs)
 	return (long)regs->r0;
 }
 
+static inline void instruction_pointer_set(struct pt_regs *regs,
+					   unsigned long val)
+{
+	instruction_pointer(regs) = val;
+}
+
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+	return regs->sp;
+}
+
+extern int regs_query_register_offset(const char *name);
+extern const char *regs_query_register_name(unsigned int offset);
+extern bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr);
+extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+					       unsigned int n);
+
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+					      unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* __ASM_PTRACE_H */
diff --git a/arch/arc/include/asm/segment.h b/arch/arc/include/asm/segment.h
deleted file mode 100644
index 871f8ab11bfd..000000000000
--- a/arch/arc/include/asm/segment.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- */
-
-#ifndef __ASMARC_SEGMENT_H
-#define __ASMARC_SEGMENT_H
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long mm_segment_t;
-
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-
-#define KERNEL_DS		MAKE_MM_SEG(0)
-#define USER_DS			MAKE_MM_SEG(TASK_SIZE)
-#define uaccess_kernel()	(get_fs() == KERNEL_DS)
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASMARC_SEGMENT_H */
diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h
index 01f85478170d..028a8cf76206 100644
--- a/arch/arc/include/asm/setup.h
+++ b/arch/arc/include/asm/setup.h
@@ -2,8 +2,8 @@
 /*
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  */
-#ifndef __ASMARC_SETUP_H
-#define __ASMARC_SETUP_H
+#ifndef __ASM_ARC_SETUP_H
+#define __ASM_ARC_SETUP_H
 
 
 #include <linux/types.h>
@@ -34,4 +34,12 @@ long __init arc_get_mem_sz(void);
 #define IS_AVAIL2(v, s, cfg)	IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg))
 #define IS_AVAIL3(v, v2, s)	IS_AVAIL1(v, s), IS_AVAIL1(v, IS_DISABLED_RUN(v2))
 
+extern void arc_mmu_init(void);
+extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
+extern void read_decode_mmu_bcr(void);
+
+extern void arc_cache_init(void);
+extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
+extern void read_decode_cache_bcr(void);
+
 #endif /* __ASMARC_SETUP_H */
diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h
index c5de4008d19f..d856491606ac 100644
--- a/arch/arc/include/asm/smp.h
+++ b/arch/arc/include/asm/smp.h
@@ -105,7 +105,6 @@ static inline const char *arc_platform_smp_cpuinfo(void)
 #include <asm/spinlock.h>
 
 extern arch_spinlock_t smp_atomic_ops_lock;
-extern arch_spinlock_t smp_bitops_lock;
 
 #define atomic_ops_lock(flags)	do {		\
 	local_irq_save(flags);			\
@@ -117,24 +116,11 @@ extern arch_spinlock_t smp_bitops_lock;
 	local_irq_restore(flags);		\
 } while (0)
 
-#define bitops_lock(flags)	do {		\
-	local_irq_save(flags);			\
-	arch_spin_lock(&smp_bitops_lock);	\
-} while (0)
-
-#define bitops_unlock(flags) do {		\
-	arch_spin_unlock(&smp_bitops_lock);	\
-	local_irq_restore(flags);		\
-} while (0)
-
 #else /* !CONFIG_SMP */
 
 #define atomic_ops_lock(flags)		local_irq_save(flags)
 #define atomic_ops_unlock(flags)	local_irq_restore(flags)
 
-#define bitops_lock(flags)		local_irq_save(flags)
-#define bitops_unlock(flags)		local_irq_restore(flags)
-
 #endif /* !CONFIG_SMP */
 
 #endif	/* !CONFIG_ARC_HAS_LLSC */
diff --git a/arch/arc/include/asm/syscall.h b/arch/arc/include/asm/syscall.h
index 94529e89dff0..9709256e31c8 100644
--- a/arch/arc/include/asm/syscall.h
+++ b/arch/arc/include/asm/syscall.h
@@ -12,6 +12,8 @@
 #include <asm/unistd.h>
 #include <asm/ptrace.h>		/* in_syscall() */
 
+extern void *sys_call_table[];
+
 static inline long
 syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 {
diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h
index c0942c24d401..6ba7fe417095 100644
--- a/arch/arc/include/asm/thread_info.h
+++ b/arch/arc/include/asm/thread_info.h
@@ -27,7 +27,6 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/thread_info.h>
-#include <asm/segment.h>
 
 /*
  * low level task data that entry.S needs immediate access to
@@ -40,7 +39,6 @@ struct thread_info {
 	unsigned long flags;		/* low level flags */
 	int preempt_count;		/* 0 => preemptable, <0 => BUG */
 	struct task_struct *task;	/* main task structure */
-	mm_segment_t addr_limit;	/* thread address space */
 	__u32 cpu;			/* current CPU */
 	unsigned long thr_ptr;		/* TLS ptr */
 };
@@ -56,7 +54,6 @@ struct thread_info {
 	.flags      = 0,			\
 	.cpu        = 0,			\
 	.preempt_count  = INIT_PREEMPT_COUNT,	\
-	.addr_limit = KERNEL_DS,		\
 }
 
 static inline __attribute_const__ struct thread_info *current_thread_info(void)
@@ -81,9 +78,9 @@ static inline __attribute_const__ struct thread_info *current_thread_info(void)
 #define TIF_SYSCALL_AUDIT	4	/* syscall auditing active */
 #define TIF_NOTIFY_SIGNAL	5	/* signal notifications exist */
 #define TIF_SYSCALL_TRACE	15	/* syscall trace active */
-
 /* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		16
+#define TIF_SYSCALL_TRACEPOINT	17	/* syscall tracepoint instrumentation */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
@@ -92,15 +89,18 @@ static inline __attribute_const__ struct thread_info *current_thread_info(void)
 #define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
 #define _TIF_NOTIFY_SIGNAL	(1<<TIF_NOTIFY_SIGNAL)
 #define _TIF_MEMDIE		(1<<TIF_MEMDIE)
+#define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
 
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
 				 _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL)
 
+#define _TIF_SYSCALL_WORK	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_TRACEPOINT)
+
 /*
  * _TIF_ALLWORK_MASK includes SYSCALL_TRACE, but we don't need it.
- * SYSCALL_TRACE is anyway seperately/unconditionally tested right after a
- * syscall, so all that reamins to be tested is _TIF_WORK_MASK
+ * SYSCALL_TRACE is anyway separately/unconditionally tested right after a
+ * syscall, so all that remains to be tested is _TIF_WORK_MASK
  */
 
 #endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/arc/include/asm/tlb-mmu1.h b/arch/arc/include/asm/tlb-mmu1.h
deleted file mode 100644
index a3083b36f5f4..000000000000
--- a/arch/arc/include/asm/tlb-mmu1.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- */
-
-#ifndef __ASM_TLB_MMU_V1_H__
-#define __ASM_TLB_MMU_V1_H__
-
-#include <asm/mmu.h>
-
-#if defined(__ASSEMBLY__) && (CONFIG_ARC_MMU_VER == 1)
-
-.macro TLB_WRITE_HEURISTICS
-
-#define JH_HACK1
-#undef JH_HACK2
-#undef JH_HACK3
-
-#ifdef JH_HACK3
-; Calculate set index for 2-way MMU
-; -avoiding use of GetIndex from MMU
-;   and its unpleasant LFSR pseudo-random sequence
-;
-; r1 = TLBPD0 from TLB_RELOAD above
-;
-; -- jh_ex_way_set not cleared on startup
-;    didn't want to change setup.c
-;    hence extra instruction to clean
-;
-; -- should be in cache since in same line
-;    as r0/r1 saves above
-;
-ld  r0,[jh_ex_way_sel]  ; victim pointer
-and r0,r0,1         ; clean
-xor.f   r0,r0,1         ; flip
-st  r0,[jh_ex_way_sel]  ; store back
-asr r0,r1,12        ; get set # <<1, note bit 12=R=0
-or.nz   r0,r0,1         ; set way bit
-and r0,r0,0xff      ; clean
-sr  r0,[ARC_REG_TLBINDEX]
-#endif
-
-#ifdef JH_HACK2
-; JH hack #2
-;  Faster than hack #1 in non-thrash case, but hard-coded for 2-way MMU
-;  Slower in thrash case (where it matters) because more code is executed
-;  Inefficient due to two-register paradigm of this miss handler
-;
-/* r1 = data TLBPD0 at this point */
-lr      r0,[eret]               /* instruction address */
-xor     r0,r0,r1                /* compare set #       */
-and.f   r0,r0,0x000fe000        /* 2-way MMU mask      */
-bne     88f                     /* not in same set - no need to probe */
-
-lr      r0,[eret]               /* instruction address */
-and     r0,r0,PAGE_MASK         /* VPN of instruction address */
-; lr  r1,[ARC_REG_TLBPD0]     /* Data VPN+ASID - already in r1 from TLB_RELOAD*/
-and     r1,r1,0xff              /* Data ASID */
-or      r0,r0,r1                /* Instruction address + Data ASID */
-
-lr      r1,[ARC_REG_TLBPD0]     /* save TLBPD0 containing data TLB*/
-sr      r0,[ARC_REG_TLBPD0]     /* write instruction address to TLBPD0 */
-sr      TLBProbe, [ARC_REG_TLBCOMMAND] /* Look for instruction */
-lr      r0,[ARC_REG_TLBINDEX]   /* r0 = index where instruction is, if at all */
-sr      r1,[ARC_REG_TLBPD0]     /* restore TLBPD0 */
-
-xor     r0,r0,1                 /* flip bottom bit of data index */
-b.d     89f
-sr      r0,[ARC_REG_TLBINDEX]   /* and put it back */
-88:
-sr  TLBGetIndex, [ARC_REG_TLBCOMMAND]
-89:
-#endif
-
-#ifdef JH_HACK1
-;
-; Always checks whether instruction will be kicked out by dtlb miss
-;
-mov_s   r3, r1                  ; save PD0 prepared by TLB_RELOAD in r3
-lr      r0,[eret]               /* instruction address */
-and     r0,r0,PAGE_MASK         /* VPN of instruction address */
-bmsk    r1,r3,7                 /* Data ASID, bits 7-0 */
-or_s    r0,r0,r1                /* Instruction address + Data ASID */
-
-sr      r0,[ARC_REG_TLBPD0]     /* write instruction address to TLBPD0 */
-sr      TLBProbe, [ARC_REG_TLBCOMMAND] /* Look for instruction */
-lr      r0,[ARC_REG_TLBINDEX]   /* r0 = index where instruction is, if at all */
-sr      r3,[ARC_REG_TLBPD0]     /* restore TLBPD0 */
-
-sr      TLBGetIndex, [ARC_REG_TLBCOMMAND]
-lr      r1,[ARC_REG_TLBINDEX]   /* r1 = index where MMU wants to put data */
-cmp     r0,r1                   /* if no match on indices, go around */
-xor.eq  r1,r1,1                 /* flip bottom bit of data index */
-sr      r1,[ARC_REG_TLBINDEX]   /* and put it back */
-#endif
-
-.endm
-
-#endif
-
-#endif
diff --git a/arch/arc/include/asm/uaccess.h b/arch/arc/include/asm/uaccess.h
index ea40ec7f6cae..99712471c96a 100644
--- a/arch/arc/include/asm/uaccess.h
+++ b/arch/arc/include/asm/uaccess.h
@@ -23,35 +23,6 @@
 
 #include <linux/string.h>	/* for generic string functions */
 
-
-#define __kernel_ok		(uaccess_kernel())
-
-/*
- * Algorithmically, for __user_ok() we want do:
- * 	(start < TASK_SIZE) && (start+len < TASK_SIZE)
- * where TASK_SIZE could either be retrieved from thread_info->addr_limit or
- * emitted directly in code.
- *
- * This can however be rewritten as follows:
- *	(len <= TASK_SIZE) && (start+len < TASK_SIZE)
- *
- * Because it essentially checks if buffer end is within limit and @len is
- * non-ngeative, which implies that buffer start will be within limit too.
- *
- * The reason for rewriting being, for majority of cases, @len is generally
- * compile time constant, causing first sub-expression to be compile time
- * subsumed.
- *
- * The second part would generate weird large LIMMs e.g. (0x6000_0000 - 0x10),
- * so we check for TASK_SIZE using get_fs() since the addr_limit load from mem
- * would already have been done at this call site for __kernel_ok()
- *
- */
-#define __user_ok(addr, sz)	(((sz) <= TASK_SIZE) && \
-				 ((addr) <= (get_fs() - (sz))))
-#define __access_ok(addr, sz)	(unlikely(__kernel_ok) || \
-				 likely(__user_ok((addr), (sz))))
-
 /*********** Single byte/hword/word copies ******************/
 
 #define __get_user_fn(sz, u, k)					\
@@ -655,91 +626,18 @@ static inline unsigned long __arc_clear_user(void __user *to, unsigned long n)
 	return res;
 }
 
-static inline long
-__arc_strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res = 0;
-	char val;
-
-	if (count == 0)
-		return 0;
-
-	__asm__ __volatile__(
-	"	mov	lp_count, %5		\n"
-	"	lp	3f			\n"
-	"1:	ldb.ab  %3, [%2, 1]		\n"
-	"	breq.d	%3, 0, 3f               \n"
-	"	stb.ab  %3, [%1, 1]		\n"
-	"	add	%0, %0, 1	# Num of NON NULL bytes copied	\n"
-	"3:								\n"
-	"	.section .fixup, \"ax\"		\n"
-	"	.align 4			\n"
-	"4:	mov %0, %4		# sets @res as -EFAULT	\n"
-	"	j   3b				\n"
-	"	.previous			\n"
-	"	.section __ex_table, \"a\"	\n"
-	"	.align 4			\n"
-	"	.word   1b, 4b			\n"
-	"	.previous			\n"
-	: "+r"(res), "+r"(dst), "+r"(src), "=r"(val)
-	: "g"(-EFAULT), "r"(count)
-	: "lp_count", "memory");
-
-	return res;
-}
-
-static inline long __arc_strnlen_user(const char __user *s, long n)
-{
-	long res, tmp1, cnt;
-	char val;
-
-	__asm__ __volatile__(
-	"	mov %2, %1			\n"
-	"1:	ldb.ab  %3, [%0, 1]		\n"
-	"	breq.d  %3, 0, 2f		\n"
-	"	sub.f   %2, %2, 1		\n"
-	"	bnz 1b				\n"
-	"	sub %2, %2, 1			\n"
-	"2:	sub %0, %1, %2			\n"
-	"3:	;nop				\n"
-	"	.section .fixup, \"ax\"		\n"
-	"	.align 4			\n"
-	"4:	mov %0, 0			\n"
-	"	j   3b				\n"
-	"	.previous			\n"
-	"	.section __ex_table, \"a\"	\n"
-	"	.align 4			\n"
-	"	.word 1b, 4b			\n"
-	"	.previous			\n"
-	: "=r"(res), "=r"(tmp1), "=r"(cnt), "=r"(val)
-	: "0"(s), "1"(n)
-	: "memory");
-
-	return res;
-}
-
 #ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
 
 #define INLINE_COPY_TO_USER
 #define INLINE_COPY_FROM_USER
 
 #define __clear_user(d, n)		__arc_clear_user(d, n)
-#define __strncpy_from_user(d, s, n)	__arc_strncpy_from_user(d, s, n)
-#define __strnlen_user(s, n)		__arc_strnlen_user(s, n)
 #else
 extern unsigned long arc_clear_user_noinline(void __user *to,
 		unsigned long n);
-extern long arc_strncpy_from_user_noinline (char *dst, const char __user *src,
-		long count);
-extern long arc_strnlen_user_noinline(const char __user *src, long n);
-
 #define __clear_user(d, n)		arc_clear_user_noinline(d, n)
-#define __strncpy_from_user(d, s, n)	arc_strncpy_from_user_noinline(d, s, n)
-#define __strnlen_user(s, n)		arc_strnlen_user_noinline(s, n)
-
 #endif
 
-#include <asm/segment.h>
 #include <asm-generic/uaccess.h>
 
 #endif
diff --git a/arch/arc/include/uapi/asm/bpf_perf_event.h b/arch/arc/include/uapi/asm/bpf_perf_event.h
new file mode 100644
index 000000000000..6cb1c2823288
--- /dev/null
+++ b/arch/arc/include/uapi/asm/bpf_perf_event.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI__ASM_BPF_PERF_EVENT_H__
+#define _UAPI__ASM_BPF_PERF_EVENT_H__
+
+#include <asm/ptrace.h>
+
+typedef struct user_regs_struct bpf_user_pt_regs_t;
+
+#endif /* _UAPI__ASM_BPF_PERF_EVENT_H__ */
diff --git a/arch/arc/include/uapi/asm/page.h b/arch/arc/include/uapi/asm/page.h
index 2a97e2718a21..2a4ad619abfb 100644
--- a/arch/arc/include/uapi/asm/page.h
+++ b/arch/arc/include/uapi/asm/page.h
@@ -33,5 +33,4 @@
 
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
-
 #endif /* _UAPI__ASM_ARC_PAGE_H */
diff --git a/arch/arc/include/uapi/asm/sigcontext.h b/arch/arc/include/uapi/asm/sigcontext.h
index 95f8a4380e11..7a5449dfcb29 100644
--- a/arch/arc/include/uapi/asm/sigcontext.h
+++ b/arch/arc/include/uapi/asm/sigcontext.h
@@ -18,6 +18,7 @@
  */
 struct sigcontext {
 	struct user_regs_struct regs;
+	struct user_regs_arcv2 v2abi;
 };
 
 #endif /* _ASM_ARC_SIGCONTEXT_H */
diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
index 8c4fc4b54c14..0723d888ac44 100644
--- a/arch/arc/kernel/Makefile
+++ b/arch/arc/kernel/Makefile
@@ -3,7 +3,7 @@
 # Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
 #
 
-obj-y	:= arcksyms.o setup.o irq.o reset.o ptrace.o process.o devtree.o
+obj-y	:= head.o arcksyms.o setup.o irq.o reset.o ptrace.o process.o devtree.o
 obj-y	+= signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o
 obj-$(CONFIG_ISA_ARCOMPACT)		+= entry-compact.o intc-compact.o
 obj-$(CONFIG_ISA_ARCV2)			+= entry-arcv2.o intc-arcv2.o
@@ -31,4 +31,4 @@ else
 obj-y += ctx_sw_asm.o
 endif
 
-extra-y := vmlinux.lds head.o
+extra-y := vmlinux.lds
diff --git a/arch/arc/kernel/disasm.c b/arch/arc/kernel/disasm.c
index 03f8b1be0c3a..ccc7e8c39eb3 100644
--- a/arch/arc/kernel/disasm.c
+++ b/arch/arc/kernel/disasm.c
@@ -366,7 +366,7 @@ void __kprobes disasm_instr(unsigned long addr, struct disasm_state *state,
 	case op_SP:	/* LD_S|LDB_S b,[sp,u7], ST_S|STB_S b,[sp,u7] */
 		/* note: we are ignoring possibility of:
 		 * ADD_S, SUB_S, PUSH_S, POP_S as these should not
-		 * cause unaliged exception anyway */
+		 * cause unaligned exception anyway */
 		state->write = BITS(state->words[0], 6, 6);
 		state->zz = BITS(state->words[0], 5, 5);
 		if (state->zz)
@@ -434,14 +434,31 @@ long __kprobes get_reg(int reg, struct pt_regs *regs,
 {
 	long *p;
 
+#if defined(CONFIG_ISA_ARCOMPACT)
 	if (reg <= 12) {
 		p = &regs->r0;
 		return p[-reg];
 	}
+#else /* CONFIG_ISA_ARCV2 */
+	if (reg <= 11) {
+		p = &regs->r0;
+		return p[reg];
+	}
 
+	if (reg == 12)
+		return regs->r12;
+	if (reg == 30)
+		return regs->r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	if (reg == 58)
+		return regs->r58;
+	if (reg == 59)
+		return regs->r59;
+#endif
+#endif
 	if (cregs && (reg <= 25)) {
 		p = &cregs->r13;
-		return p[13-reg];
+		return p[13 - reg];
 	}
 
 	if (reg == 26)
@@ -461,6 +478,7 @@ void __kprobes set_reg(int reg, long val, struct pt_regs *regs,
 {
 	long *p;
 
+#if defined(CONFIG_ISA_ARCOMPACT)
 	switch (reg) {
 	case 0 ... 12:
 		p = &regs->r0;
@@ -469,7 +487,7 @@ void __kprobes set_reg(int reg, long val, struct pt_regs *regs,
 	case 13 ... 25:
 		if (cregs) {
 			p = &cregs->r13;
-			p[13-reg] = val;
+			p[13 - reg] = val;
 		}
 		break;
 	case 26:
@@ -487,6 +505,48 @@ void __kprobes set_reg(int reg, long val, struct pt_regs *regs,
 	default:
 		break;
 	}
+#else /* CONFIG_ISA_ARCV2 */
+	switch (reg) {
+	case 0 ... 11:
+		p = &regs->r0;
+		p[reg] = val;
+		break;
+	case 12:
+		regs->r12 = val;
+		break;
+	case 13 ... 25:
+		if (cregs) {
+			p = &cregs->r13;
+			p[13 - reg] = val;
+		}
+		break;
+	case 26:
+		regs->r26 = val;
+		break;
+	case 27:
+		regs->fp = val;
+		break;
+	case 28:
+		regs->sp = val;
+		break;
+	case 30:
+		regs->r30 = val;
+		break;
+	case 31:
+		regs->blink = val;
+		break;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	case 58:
+		regs->r58 = val;
+		break;
+	case 59:
+		regs->r59 = val;
+		break;
+#endif
+	default:
+		break;
+	}
+#endif
 }
 
 /*
@@ -503,7 +563,6 @@ int __kprobes disasm_next_pc(unsigned long pc, struct pt_regs *regs,
 {
 	struct disasm_state instr;
 
-	memset(&instr, 0, sizeof(struct disasm_state));
 	disasm_instr(pc, &instr, 0, regs, cregs);
 
 	*next_pc = pc + instr.instr_len;
diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S
index 12d5f12d10d2..a7e6a2174187 100644
--- a/arch/arc/kernel/entry-arcv2.S
+++ b/arch/arc/kernel/entry-arcv2.S
@@ -10,6 +10,7 @@
 #include <asm/errno.h>
 #include <asm/arcregs.h>
 #include <asm/irqflags.h>
+#include <asm/mmu.h>
 
 ; A maximum number of supported interrupts in the core interrupt controller.
 ; This number is not equal to the maximum interrupt number (256) because
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index 1743506081da..54e91df678dd 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -29,8 +29,8 @@ ENTRY(sys_clone_wrapper)
 	DISCARD_CALLEE_SAVED_USER
 
 	GET_CURR_THR_INFO_FLAGS   r10
-	btst r10, TIF_SYSCALL_TRACE
-	bnz  tracesys_exit
+	and.f 0, r10, _TIF_SYSCALL_WORK
+	bnz   tracesys_exit
 
 	b .Lret_from_system_call
 END(sys_clone_wrapper)
@@ -41,8 +41,8 @@ ENTRY(sys_clone3_wrapper)
 	DISCARD_CALLEE_SAVED_USER
 
 	GET_CURR_THR_INFO_FLAGS   r10
-	btst r10, TIF_SYSCALL_TRACE
-	bnz  tracesys_exit
+	and.f 0, r10, _TIF_SYSCALL_WORK
+	bnz   tracesys_exit
 
 	b .Lret_from_system_call
 END(sys_clone3_wrapper)
@@ -101,11 +101,8 @@ ENTRY(EV_MachineCheck)
 	lr  r0, [efa]
 	mov r1, sp
 
-	; hardware auto-disables MMU, re-enable it to allow kernel vaddr
-	; access for say stack unwinding of modules for crash dumps
-	lr	r3, [ARC_REG_PID]
-	or	r3, r3, MMU_ENABLE
-	sr	r3, [ARC_REG_PID]
+	; MC excpetions disable MMU
+	ARC_MMU_REENABLE r3
 
 	lsr  	r3, r2, 8
 	bmsk 	r3, r3, 7
@@ -177,7 +174,7 @@ tracesys:
 
 	; Do the Sys Call as we normally would.
 	; Validate the Sys Call number
-	cmp     r8,  NR_syscalls
+	cmp     r8,  NR_syscalls - 1
 	mov.hi  r0, -ENOSYS
 	bhi     tracesys_exit
 
@@ -199,6 +196,7 @@ tracesys_exit:
 	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
 
 	;POST Sys Call Ptrace Hook
+	mov r0, sp		; pt_regs needed
 	bl  @syscall_trace_exit
 	b   ret_from_exception ; NOT ret_from_system_call at is saves r0 which
 	; we'd done before calling post hook above
@@ -249,13 +247,13 @@ ENTRY(EV_Trap)
 
 	; If syscall tracing ongoing, invoke pre-post-hooks
 	GET_CURR_THR_INFO_FLAGS   r10
-	btst r10, TIF_SYSCALL_TRACE
-	bnz tracesys  ; this never comes back
+	and.f 0, r10, _TIF_SYSCALL_WORK
+	bnz   tracesys  ; this never comes back
 
 	;============ Normal syscall case
 
 	; syscall num shd not exceed the total system calls avail
-	cmp     r8,  NR_syscalls
+	cmp     r8,  NR_syscalls - 1
 	mov.hi  r0, -ENOSYS
 	bhi     .Lret_from_system_call
 
diff --git a/arch/arc/kernel/fpu.c b/arch/arc/kernel/fpu.c
index c67c0f0f5f77..ec640219d989 100644
--- a/arch/arc/kernel/fpu.c
+++ b/arch/arc/kernel/fpu.c
@@ -57,23 +57,26 @@ void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
 
 void fpu_init_task(struct pt_regs *regs)
 {
+	const unsigned int fwe = 0x80000000;
+
 	/* default rounding mode */
 	write_aux_reg(ARC_REG_FPU_CTRL, 0x100);
 
-	/* set "Write enable" to allow explicit write to exception flags */
-	write_aux_reg(ARC_REG_FPU_STATUS, 0x80000000);
+	/* Initialize to zero: setting requires FWE be set */
+	write_aux_reg(ARC_REG_FPU_STATUS, fwe);
 }
 
 void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
 {
 	struct arc_fpu *save = &prev->thread.fpu;
 	struct arc_fpu *restore = &next->thread.fpu;
+	const unsigned int fwe = 0x80000000;
 
 	save->ctrl = read_aux_reg(ARC_REG_FPU_CTRL);
 	save->status = read_aux_reg(ARC_REG_FPU_STATUS);
 
 	write_aux_reg(ARC_REG_FPU_CTRL, restore->ctrl);
-	write_aux_reg(ARC_REG_FPU_STATUS, restore->status);
+	write_aux_reg(ARC_REG_FPU_STATUS, (fwe | restore->status));
 }
 
 #endif
diff --git a/arch/arc/kernel/intc-compact.c b/arch/arc/kernel/intc-compact.c
index a86641b91e65..6885e422870e 100644
--- a/arch/arc/kernel/intc-compact.c
+++ b/arch/arc/kernel/intc-compact.c
@@ -142,7 +142,7 @@ IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ);
  *    Time hard-ISR, timer_interrupt( ) calls spin_unlock_irq several times.
  *    Here local_irq_enable( ) shd not re-enable lower priority interrupts
  * -If called from soft-ISR, it must re-enable all interrupts
- *    soft ISR are low prioity jobs which can be very slow, thus all IRQs
+ *    soft ISR are low priority jobs which can be very slow, thus all IRQs
  *    must be enabled while they run.
  *    Now hardware context wise we may still be in L2 ISR (not done rtie)
  *    still we must re-enable both L1 and L2 IRQs
diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c
index ef909dd4b40c..dd09b58ff82d 100644
--- a/arch/arc/kernel/irq.c
+++ b/arch/arc/kernel/irq.c
@@ -6,6 +6,8 @@
 #include <linux/interrupt.h>
 #include <linux/irqchip.h>
 #include <asm/mach_desc.h>
+
+#include <asm/irq_regs.h>
 #include <asm/smp.h>
 
 /*
@@ -39,5 +41,11 @@ void __init init_IRQ(void)
  */
 void arch_do_IRQ(unsigned int hwirq, struct pt_regs *regs)
 {
-	handle_domain_irq(NULL, hwirq, regs);
+	struct pt_regs *old_regs;
+
+	irq_enter();
+	old_regs = set_irq_regs(regs);
+	generic_handle_domain_irq(NULL, hwirq);
+	set_irq_regs(old_regs);
+	irq_exit();
 }
diff --git a/arch/arc/kernel/jump_label.c b/arch/arc/kernel/jump_label.c
index b8600dc325b5..70b74a5d047b 100644
--- a/arch/arc/kernel/jump_label.c
+++ b/arch/arc/kernel/jump_label.c
@@ -96,19 +96,6 @@ void arch_jump_label_transform(struct jump_entry *entry,
 	flush_icache_range(entry->code, entry->code + JUMP_LABEL_NOP_SIZE);
 }
 
-void arch_jump_label_transform_static(struct jump_entry *entry,
-				      enum jump_label_type type)
-{
-	/*
-	 * We use only one NOP type (1x, 4 byte) in arch_static_branch, so
-	 * there's no need to patch an identical NOP over the top of it here.
-	 * The generic code calls 'arch_jump_label_transform' if the NOP needs
-	 * to be replaced by a branch, so 'arch_jump_label_transform_static' is
-	 * never called with type other than JUMP_LABEL_NOP.
-	 */
-	BUG_ON(type != JUMP_LABEL_NOP);
-}
-
 #ifdef CONFIG_ARC_DBG_JUMP_LABEL
 #define SELFTEST_MSG	"ARC: instruction generation self-test: "
 
diff --git a/arch/arc/kernel/kgdb.c b/arch/arc/kernel/kgdb.c
index ecfbc42d3a40..345a0000554c 100644
--- a/arch/arc/kernel/kgdb.c
+++ b/arch/arc/kernel/kgdb.c
@@ -140,6 +140,7 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
 		ptr = &remcomInBuffer[1];
 		if (kgdb_hex2long(&ptr, &addr))
 			regs->ret = addr;
+		fallthrough;
 
 	case 'D':
 	case 'k':
diff --git a/arch/arc/kernel/kprobes.c b/arch/arc/kernel/kprobes.c
index cabef45f11df..e71d64119d71 100644
--- a/arch/arc/kernel/kprobes.c
+++ b/arch/arc/kernel/kprobes.c
@@ -317,22 +317,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned long trapnr)
 		 * caused the fault.
 		 */
 
-		/* We increment the nmissed count for accounting,
-		 * we can also use npre/npostfault count for accounting
-		 * these specific fault cases.
-		 */
-		kprobes_inc_nmissed_count(cur);
-
-		/*
-		 * We come here because instructions in the pre/post
-		 * handler caused the page_fault, this could happen
-		 * if handler tries to access user space by
-		 * copy_from_user(), get_user() etc. Let the
-		 * user-specified handler try to fix it first.
-		 */
-		if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
-			return 1;
-
 		/*
 		 * In case the user-specified fault handler returned zero,
 		 * try to fix up.
@@ -379,8 +363,9 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 
 static void __used kretprobe_trampoline_holder(void)
 {
-	__asm__ __volatile__(".global kretprobe_trampoline\n"
-			     "kretprobe_trampoline:\n" "nop\n");
+	__asm__ __volatile__(".global __kretprobe_trampoline\n"
+			     "__kretprobe_trampoline:\n"
+			     "nop\n");
 }
 
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
@@ -391,13 +376,13 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 	ri->fp = NULL;
 
 	/* Replace the return addr with trampoline addr */
-	regs->blink = (unsigned long)&kretprobe_trampoline;
+	regs->blink = (unsigned long)&__kretprobe_trampoline;
 }
 
 static int __kprobes trampoline_probe_handler(struct kprobe *p,
 					      struct pt_regs *regs)
 {
-	regs->ret = __kretprobe_trampoline_handler(regs, &kretprobe_trampoline, NULL);
+	regs->ret = __kretprobe_trampoline_handler(regs, NULL);
 
 	/* By returning a non zero value, we are telling the kprobe handler
 	 * that we don't want the post_handler to run
@@ -406,7 +391,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 }
 
 static struct kprobe trampoline_p = {
-	.addr = (kprobe_opcode_t *) &kretprobe_trampoline,
+	.addr = (kprobe_opcode_t *) &__kretprobe_trampoline,
 	.pre_handler = trampoline_probe_handler
 };
 
@@ -418,7 +403,7 @@ int __init arch_init_kprobes(void)
 
 int __kprobes arch_trampoline_kprobe(struct kprobe *p)
 {
-	if (p->addr == (kprobe_opcode_t *) &kretprobe_trampoline)
+	if (p->addr == (kprobe_opcode_t *) &__kretprobe_trampoline)
 		return 1;
 
 	return 0;
diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c
index abf9398cc333..f9fdb557c263 100644
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@@ -352,7 +352,7 @@ static void idu_cascade_isr(struct irq_desc *desc)
 	irq_hw_number_t idu_hwirq = core_hwirq - FIRST_EXT_IRQ;
 
 	chained_irq_enter(core_chip, desc);
-	generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq));
+	generic_handle_domain_irq(idu_domain, idu_hwirq);
 	chained_irq_exit(core_chip, desc);
 }
 
diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c
index 145722f80c9b..adff957962da 100644
--- a/arch/arc/kernel/perf_event.c
+++ b/arch/arc/kernel/perf_event.c
@@ -17,6 +17,168 @@
 /* HW holds 8 symbols + one for null terminator */
 #define ARCPMU_EVENT_NAME_LEN	9
 
+/*
+ * Some ARC pct quirks:
+ *
+ * PERF_COUNT_HW_STALLED_CYCLES_BACKEND
+ * PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
+ *	The ARC 700 can either measure stalls per pipeline stage, or all stalls
+ *	combined; for now we assign all stalls to STALLED_CYCLES_BACKEND
+ *	and all pipeline flushes (e.g. caused by mispredicts, etc.) to
+ *	STALLED_CYCLES_FRONTEND.
+ *
+ *	We could start multiple performance counters and combine everything
+ *	afterwards, but that makes it complicated.
+ *
+ *	Note that I$ cache misses aren't counted by either of the two!
+ */
+
+/*
+ * ARC PCT has hardware conditions with fixed "names" but variable "indexes"
+ * (based on a specific RTL build)
+ * Below is the static map between perf generic/arc specific event_id and
+ * h/w condition names.
+ * At the time of probe, we loop thru each index and find it's name to
+ * complete the mapping of perf event_id to h/w index as latter is needed
+ * to program the counter really
+ */
+static const char * const arc_pmu_ev_hw_map[] = {
+	/* count cycles */
+	[PERF_COUNT_HW_CPU_CYCLES] = "crun",
+	[PERF_COUNT_HW_REF_CPU_CYCLES] = "crun",
+	[PERF_COUNT_HW_BUS_CYCLES] = "crun",
+
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = "bflush",
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = "bstall",
+
+	/* counts condition */
+	[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
+	/* All jump instructions that are taken */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmptak",
+#ifdef CONFIG_ISA_ARCV2
+	[PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",
+#else
+	[PERF_COUNT_ARC_BPOK]         = "bpok",	  /* NP-NT, PT-T, PNT-NT */
+	[PERF_COUNT_HW_BRANCH_MISSES] = "bpfail", /* NP-T, PT-NT, PNT-T */
+#endif
+	[PERF_COUNT_ARC_LDC] = "imemrdc",	/* Instr: mem read cached */
+	[PERF_COUNT_ARC_STC] = "imemwrc",	/* Instr: mem write cached */
+
+	[PERF_COUNT_ARC_DCLM] = "dclm",		/* D-cache Load Miss */
+	[PERF_COUNT_ARC_DCSM] = "dcsm",		/* D-cache Store Miss */
+	[PERF_COUNT_ARC_ICM] = "icm",		/* I-cache Miss */
+	[PERF_COUNT_ARC_EDTLB] = "edtlb",	/* D-TLB Miss */
+	[PERF_COUNT_ARC_EITLB] = "eitlb",	/* I-TLB Miss */
+
+	[PERF_COUNT_HW_CACHE_REFERENCES] = "imemrdc",	/* Instr: mem read cached */
+	[PERF_COUNT_HW_CACHE_MISSES] = "dclm",		/* D-cache Load Miss */
+};
+
+#define C(_x)			PERF_COUNT_HW_CACHE_##_x
+#define CACHE_OP_UNSUPPORTED	0xffff
+
+static const unsigned int arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	[C(L1D)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCLM,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_STC,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCSM,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= PERF_COUNT_HW_INSTRUCTIONS,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_ICM,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EDTLB,
+		},
+			/* DTLB LD/ST Miss not segregated by h/w*/
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EITLB,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = PERF_COUNT_HW_BRANCH_INSTRUCTIONS,
+			[C(RESULT_MISS)]	= PERF_COUNT_HW_BRANCH_MISSES,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
 enum arc_pmu_attr_groups {
 	ARCPMU_ATTR_GR_EVENTS,
 	ARCPMU_ATTR_GR_FORMATS,
@@ -328,7 +490,7 @@ static void arc_pmu_stop(struct perf_event *event, int flags)
 	}
 
 	if (!(event->hw.state & PERF_HES_STOPPED)) {
-		/* stop ARC pmu here */
+		/* stop hw counter here */
 		write_aux_reg(ARC_REG_PCT_INDEX, idx);
 
 		/* condition code #0 is always "never" */
@@ -361,7 +523,7 @@ static int arc_pmu_add(struct perf_event *event, int flags)
 {
 	struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
 	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
+	int idx;
 
 	idx = ffz(pmu_cpu->used_mask[0]);
 	if (idx == arc_pmu->n_counters)
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index d838d0d57696..980b71da2f61 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -43,21 +43,21 @@ SYSCALL_DEFINE0(arc_gettls)
 	return task_thread_info(current)->thr_ptr;
 }
 
-SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
+SYSCALL_DEFINE3(arc_usr_cmpxchg, int __user *, uaddr, int, expected, int, new)
 {
 	struct pt_regs *regs = current_pt_regs();
 	u32 uval;
 	int ret;
 
 	/*
-	 * This is only for old cores lacking LLOCK/SCOND, which by defintion
+	 * This is only for old cores lacking LLOCK/SCOND, which by definition
 	 * can't possibly be SMP. Thus doesn't need to be SMP safe.
 	 * And this also helps reduce the overhead for serializing in
 	 * the UP case
 	 */
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_SMP));
 
-	/* Z indicates to userspace if operation succeded */
+	/* Z indicates to userspace if operation succeeded */
 	regs->status32 &= ~STATUS_Z_MASK;
 
 	ret = access_ok(uaddr, sizeof(*uaddr));
@@ -107,21 +107,24 @@ fail:
 
 void arch_cpu_idle(void)
 {
-	/* Re-enable interrupts <= default irq priority before commiting SLEEP */
+	/* Re-enable interrupts <= default irq priority before committing SLEEP */
 	const unsigned int arg = 0x10 | ARCV2_IRQ_DEF_PRIO;
 
 	__asm__ __volatile__(
 		"sleep %0	\n"
 		:
 		:"I"(arg)); /* can't be "r" has to be embedded const */
+
+	raw_local_irq_disable();
 }
 
 #else	/* ARC700 */
 
 void arch_cpu_idle(void)
 {
-	/* sleep, but enable both set E1/E2 (levels of interrutps) before committing */
+	/* sleep, but enable both set E1/E2 (levels of interrupts) before committing */
 	__asm__ __volatile__("sleep 0x3	\n");
+	raw_local_irq_disable();
 }
 
 #endif
@@ -162,10 +165,11 @@ asmlinkage void ret_from_fork(void);
  * |    user_r25    |
  * ------------------  <===== END of PAGE
  */
-int copy_thread(unsigned long clone_flags, unsigned long usp,
-		unsigned long kthread_arg, struct task_struct *p,
-		unsigned long tls)
+int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
+	unsigned long clone_flags = args->flags;
+	unsigned long usp = args->stack;
+	unsigned long tls = args->tls;
 	struct pt_regs *c_regs;        /* child's pt_regs */
 	unsigned long *childksp;       /* to unwind out of __switch_to() */
 	struct callee_regs *c_callee;  /* child's callee regs */
@@ -191,11 +195,11 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	childksp[0] = 0;			/* fp */
 	childksp[1] = (unsigned long)ret_from_fork; /* blink */
 
-	if (unlikely(p->flags & (PF_KTHREAD | PF_IO_WORKER))) {
+	if (unlikely(args->fn)) {
 		memset(c_regs, 0, sizeof(struct pt_regs));
 
-		c_callee->r13 = kthread_arg;
-		c_callee->r14 = usp;  /* function */
+		c_callee->r13 = (unsigned long)args->fn_arg;
+		c_callee->r14 = (unsigned long)args->fn;
 
 		return 0;
 	}
@@ -294,7 +298,7 @@ int elf_check_arch(const struct elf32_hdr *x)
 	eflags = x->e_flags;
 	if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) {
 		pr_err("ABI mismatch - you need newer toolchain\n");
-		force_sigsegv(SIGSEGV);
+		force_fatal_sig(SIGSEGV);
 		return 0;
 	}
 
diff --git a/arch/arc/kernel/ptrace.c b/arch/arc/kernel/ptrace.c
index 883391977fdf..2abdcd9b09e8 100644
--- a/arch/arc/kernel/ptrace.c
+++ b/arch/arc/kernel/ptrace.c
@@ -4,12 +4,97 @@
  */
 
 #include <linux/ptrace.h>
-#include <linux/tracehook.h>
 #include <linux/sched/task_stack.h>
 #include <linux/regset.h>
 #include <linux/unistd.h>
 #include <linux/elf.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+#ifdef CONFIG_ISA_ARCOMPACT
+static const struct pt_regs_offset regoffset_table[] = {
+	REG_OFFSET_NAME(bta),
+	REG_OFFSET_NAME(lp_start),
+	REG_OFFSET_NAME(lp_end),
+	REG_OFFSET_NAME(lp_count),
+	REG_OFFSET_NAME(status32),
+	REG_OFFSET_NAME(ret),
+	REG_OFFSET_NAME(blink),
+	REG_OFFSET_NAME(fp),
+	REG_OFFSET_NAME(r26),
+	REG_OFFSET_NAME(r12),
+	REG_OFFSET_NAME(r11),
+	REG_OFFSET_NAME(r10),
+	REG_OFFSET_NAME(r9),
+	REG_OFFSET_NAME(r8),
+	REG_OFFSET_NAME(r7),
+	REG_OFFSET_NAME(r6),
+	REG_OFFSET_NAME(r5),
+	REG_OFFSET_NAME(r4),
+	REG_OFFSET_NAME(r3),
+	REG_OFFSET_NAME(r2),
+	REG_OFFSET_NAME(r1),
+	REG_OFFSET_NAME(r0),
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(orig_r0),
+	REG_OFFSET_NAME(event),
+	REG_OFFSET_NAME(user_r25),
+	REG_OFFSET_END,
+};
+
+#else
+
+static const struct pt_regs_offset regoffset_table[] = {
+	REG_OFFSET_NAME(orig_r0),
+	REG_OFFSET_NAME(event),
+	REG_OFFSET_NAME(bta),
+	REG_OFFSET_NAME(user_r25),
+	REG_OFFSET_NAME(r26),
+	REG_OFFSET_NAME(fp),
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(r12),
+	REG_OFFSET_NAME(r30),
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	REG_OFFSET_NAME(r58),
+	REG_OFFSET_NAME(r59),
+#endif
+#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
+	REG_OFFSET_NAME(DSP_CTRL),
+#endif
+	REG_OFFSET_NAME(r0),
+	REG_OFFSET_NAME(r1),
+	REG_OFFSET_NAME(r2),
+	REG_OFFSET_NAME(r3),
+	REG_OFFSET_NAME(r4),
+	REG_OFFSET_NAME(r5),
+	REG_OFFSET_NAME(r6),
+	REG_OFFSET_NAME(r7),
+	REG_OFFSET_NAME(r8),
+	REG_OFFSET_NAME(r9),
+	REG_OFFSET_NAME(r10),
+	REG_OFFSET_NAME(r11),
+	REG_OFFSET_NAME(blink),
+	REG_OFFSET_NAME(lp_end),
+	REG_OFFSET_NAME(lp_start),
+	REG_OFFSET_NAME(lp_count),
+	REG_OFFSET_NAME(ei),
+	REG_OFFSET_NAME(ldi),
+	REG_OFFSET_NAME(jli),
+	REG_OFFSET_NAME(ret),
+	REG_OFFSET_NAME(status32),
+	REG_OFFSET_END,
+};
+#endif
+
 static struct callee_regs *task_callee_regs(struct task_struct *tsk)
 {
 	struct callee_regs *tmp = (struct callee_regs *)tsk->thread.callee_reg;
@@ -100,7 +185,7 @@ static int genregs_set(struct task_struct *target,
 
 #define REG_IGNORE_ONE(LOC)		\
 	if (!ret)			\
-		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, \
+		user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, \
 			offsetof(struct user_regs_struct, LOC), \
 			offsetof(struct user_regs_struct, LOC) + 4);
 
@@ -258,13 +343,61 @@ long arch_ptrace(struct task_struct *child, long request,
 
 asmlinkage int syscall_trace_entry(struct pt_regs *regs)
 {
-	if (tracehook_report_syscall_entry(regs))
-		return ULONG_MAX;
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		if (ptrace_report_syscall_entry(regs))
+			return ULONG_MAX;
+
+#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
+	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
+		trace_sys_enter(regs, syscall_get_nr(current, regs));
+#endif
 
 	return regs->r8;
 }
 
 asmlinkage void syscall_trace_exit(struct pt_regs *regs)
 {
-	tracehook_report_syscall_exit(regs, 0);
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		ptrace_report_syscall_exit(regs, 0);
+
+#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
+	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
+		trace_sys_exit(regs, regs_return_value(regs));
+#endif
+}
+
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+const char *regs_query_register_name(unsigned int offset)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (roff->offset == offset)
+			return roff->name;
+	return NULL;
+}
+
+bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr)
+{
+	return (addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1));
+}
+
+unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
 }
diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c
index a78d8f745a67..3c1590c27fae 100644
--- a/arch/arc/kernel/signal.c
+++ b/arch/arc/kernel/signal.c
@@ -49,7 +49,7 @@
 #include <linux/personality.h>
 #include <linux/uaccess.h>
 #include <linux/syscalls.h>
-#include <linux/tracehook.h>
+#include <linux/resume_user_mode.h>
 #include <linux/sched/task_stack.h>
 
 #include <asm/ucontext.h>
@@ -61,6 +61,41 @@ struct rt_sigframe {
 	unsigned int sigret_magic;
 };
 
+static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+{
+	int err = 0;
+#ifndef CONFIG_ISA_ARCOMPACT
+	struct user_regs_arcv2 v2abi;
+
+	v2abi.r30 = regs->r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	v2abi.r58 = regs->r58;
+	v2abi.r59 = regs->r59;
+#else
+	v2abi.r58 = v2abi.r59 = 0;
+#endif
+	err = __copy_to_user(&mctx->v2abi, &v2abi, sizeof(v2abi));
+#endif
+	return err;
+}
+
+static int restore_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+{
+	int err = 0;
+#ifndef CONFIG_ISA_ARCOMPACT
+	struct user_regs_arcv2 v2abi;
+
+	err = __copy_from_user(&v2abi, &mctx->v2abi, sizeof(v2abi));
+
+	regs->r30 = v2abi.r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	regs->r58 = v2abi.r58;
+	regs->r59 = v2abi.r59;
+#endif
+#endif
+	return err;
+}
+
 static int
 stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
 	       sigset_t *set)
@@ -94,9 +129,13 @@ stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
 
 	err = __copy_to_user(&(sf->uc.uc_mcontext.regs.scratch), &uregs.scratch,
 			     sizeof(sf->uc.uc_mcontext.regs.scratch));
+
+	if (is_isa_arcv2())
+		err |= save_arcv2_regs(&(sf->uc.uc_mcontext), regs);
+
 	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(sigset_t));
 
-	return err;
+	return err ? -EFAULT : 0;
 }
 
 static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
@@ -109,8 +148,12 @@ static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
 	err |= __copy_from_user(&uregs.scratch,
 				&(sf->uc.uc_mcontext.regs.scratch),
 				sizeof(sf->uc.uc_mcontext.regs.scratch));
+
+	if (is_isa_arcv2())
+		err |= restore_arcv2_regs(&(sf->uc.uc_mcontext), regs);
+
 	if (err)
-		return err;
+		return -EFAULT;
 
 	set_current_blocked(&set);
 	regs->bta	= uregs.scratch.bta;
@@ -259,7 +302,7 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
 		regs->r2 = (unsigned long)&sf->uc;
 
 		/*
-		 * small optim to avoid unconditonally calling do_sigaltstack
+		 * small optim to avoid unconditionally calling do_sigaltstack
 		 * in sigreturn path, now that we only have rt_sigreturn
 		 */
 		magic = MAGIC_SIGALTSTK;
@@ -276,7 +319,7 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
 	regs->ret = (unsigned long)ksig->ka.sa.sa_handler;
 
 	/*
-	 * handler returns using sigreturn stub provided already by userpsace
+	 * handler returns using sigreturn stub provided already by userspace
 	 * If not, nuke the process right away
 	 */
 	if(!(ksig->ka.sa.sa_flags & SA_RESTORER))
@@ -391,9 +434,9 @@ void do_signal(struct pt_regs *regs)
 void do_notify_resume(struct pt_regs *regs)
 {
 	/*
-	 * ASM glue gaurantees that this is only called when returning to
+	 * ASM glue guarantees that this is only called when returning to
 	 * user mode
 	 */
 	if (test_thread_flag(TIF_NOTIFY_RESUME))
-		tracehook_notify_resume(regs);
+		resume_user_mode_work(regs);
 }
diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c
index 52906d314537..409cfa4675b4 100644
--- a/arch/arc/kernel/smp.c
+++ b/arch/arc/kernel/smp.c
@@ -29,15 +29,13 @@
 
 #ifndef CONFIG_ARC_HAS_LLSC
 arch_spinlock_t smp_atomic_ops_lock = __ARCH_SPIN_LOCK_UNLOCKED;
-arch_spinlock_t smp_bitops_lock = __ARCH_SPIN_LOCK_UNLOCKED;
 
 EXPORT_SYMBOL_GPL(smp_atomic_ops_lock);
-EXPORT_SYMBOL_GPL(smp_bitops_lock);
 #endif
 
 struct plat_smp_ops  __weak plat_smp_ops;
 
-/* XXX: per cpu ? Only needed once in early seconday boot */
+/* XXX: per cpu ? Only needed once in early secondary boot */
 struct task_struct *secondary_idle_tsk;
 
 /* Called from start_kernel */
@@ -189,7 +187,6 @@ void start_kernel_secondary(void)
 	pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
 
 	local_irq_enable();
-	preempt_disable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
@@ -235,14 +232,6 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-/*
- * not supported here
- */
-int setup_profiling_timer(unsigned int multiplier)
-{
-	return -EINVAL;
-}
-
 /*****************************************************************************/
 /*              Inter Processor Interrupt Handling                           */
 /*****************************************************************************/
@@ -277,14 +266,14 @@ static void ipi_send_msg_one(int cpu, enum ipi_msg_type msg)
 	 * and read back old value
 	 */
 	do {
-		new = old = READ_ONCE(*ipi_data_ptr);
+		new = old = *ipi_data_ptr;
 		new |= 1U << msg;
 	} while (cmpxchg(ipi_data_ptr, old, new) != old);
 
 	/*
 	 * Call the platform specific IPI kick function, but avoid if possible:
 	 * Only do so if there's no pending msg from other concurrent sender(s).
-	 * Otherwise, recevier will see this msg as well when it takes the
+	 * Otherwise, receiver will see this msg as well when it takes the
 	 * IPI corresponding to that msg. This is true, even if it is already in
 	 * IPI handler, because !@old means it has not yet dequeued the msg(s)
 	 * so @new msg can be a free-loader
@@ -303,7 +292,7 @@ static void ipi_send_msg(const struct cpumask *callmap, enum ipi_msg_type msg)
 		ipi_send_msg_one(cpu, msg);
 }
 
-void smp_send_reschedule(int cpu)
+void arch_smp_send_reschedule(int cpu)
 {
 	ipi_send_msg_one(cpu, IPI_RESCHEDULE);
 }
@@ -396,7 +385,7 @@ irqreturn_t do_IPI(int irq, void *dev_id)
  * API called by platform code to hookup arch-common ISR to their IPI IRQ
  *
  * Note: If IPI is provided by platform (vs. say ARC MCIP), their intc setup/map
- * function needs to call call irq_set_percpu_devid() for IPI IRQ, otherwise
+ * function needs to call irq_set_percpu_devid() for IPI IRQ, otherwise
  * request_percpu_irq() below will fail
  */
 static DEFINE_PER_CPU(int, ipi_dev);
diff --git a/arch/arc/kernel/stacktrace.c b/arch/arc/kernel/stacktrace.c
index f73da203b170..5372dc04e784 100644
--- a/arch/arc/kernel/stacktrace.c
+++ b/arch/arc/kernel/stacktrace.c
@@ -15,7 +15,7 @@
  *      = specifics of data structs where trace is saved(CONFIG_STACKTRACE etc)
  *
  *  vineetg: March 2009
- *  -Implemented correct versions of thread_saved_pc() and get_wchan()
+ *  -Implemented correct versions of thread_saved_pc() and __get_wchan()
  *
  *  rajeshwarr: 2008
  *  -Initial implementation
@@ -83,7 +83,7 @@ seed_unwind_frame_info(struct task_struct *tsk, struct pt_regs *regs,
 		 *    is safe-kept and BLINK at a well known location in there
 		 */
 
-		if (tsk->state == TASK_RUNNING)
+		if (task_is_running(tsk))
 			return -1;
 
 		frame_info->task = tsk;
@@ -149,7 +149,7 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
 #else
 	/* On ARC, only Dward based unwinder works. fp based backtracing is
 	 * not possible (-fno-omit-frame-pointer) because of the way function
-	 * prelogue is setup (callee regs saved and then fp set and not other
+	 * prologue is setup (callee regs saved and then fp set and not other
 	 * way around
 	 */
 	pr_warn_once("CONFIG_ARC_DW2_UNWIND needs to be enabled\n");
@@ -248,7 +248,7 @@ void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
  * Of course just returning schedule( ) would be pointless so unwind until
  * the function is not in schedular code
  */
-unsigned int get_wchan(struct task_struct *tsk)
+unsigned int __get_wchan(struct task_struct *tsk)
 {
 	return arc_unwind_core(tsk, NULL, __get_first_nonsched, NULL);
 }
diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c
index 57235e5c0cea..6b83e3f2b41c 100644
--- a/arch/arc/kernel/traps.c
+++ b/arch/arc/kernel/traps.c
@@ -20,11 +20,6 @@
 #include <asm/unaligned.h>
 #include <asm/kprobes.h>
 
-void __init trap_init(void)
-{
-	return;
-}
-
 void die(const char *str, struct pt_regs *regs, unsigned long address)
 {
 	show_kernel_fault_diag(str, regs, address);
diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c
index a331bb5d8319..7654c2e42dc0 100644
--- a/arch/arc/kernel/troubleshoot.c
+++ b/arch/arc/kernel/troubleshoot.c
@@ -83,12 +83,12 @@ static void show_faulting_vma(unsigned long address)
 	 * non-inclusive vma
 	 */
 	mmap_read_lock(active_mm);
-	vma = find_vma(active_mm, address);
+	vma = vma_lookup(active_mm, address);
 
-	/* check against the find_vma( ) behaviour which returns the next VMA
-	 * if the container VMA is not found
+	/* Lookup the vma at the address and report if the container VMA is not
+	 * found
 	 */
-	if (vma && (vma->vm_start <= address)) {
+	if (vma) {
 		char buf[ARC_PATH_MAX];
 		char *nm = "?";
 
diff --git a/arch/arc/kernel/unaligned.c b/arch/arc/kernel/unaligned.c
index d63ebd81f1c6..99a9b92ed98d 100644
--- a/arch/arc/kernel/unaligned.c
+++ b/arch/arc/kernel/unaligned.c
@@ -237,7 +237,7 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 	if (state.fault)
 		goto fault;
 
-	/* clear any remanants of delay slot */
+	/* clear any remnants of delay slot */
 	if (delay_mode(regs)) {
 		regs->ret = regs->bta & ~1U;
 		regs->status32 &= ~STATUS_DE_MASK;
diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c
index 74ad4256022e..9270d0a713c3 100644
--- a/arch/arc/kernel/unwind.c
+++ b/arch/arc/kernel/unwind.c
@@ -187,25 +187,26 @@ static void init_unwind_table(struct unwind_table *table, const char *name,
 			      const void *table_start, unsigned long table_size,
 			      const u8 *header_start, unsigned long header_size)
 {
-	const u8 *ptr = header_start + 4;
-	const u8 *end = header_start + header_size;
-
 	table->core.pc = (unsigned long)core_start;
 	table->core.range = core_size;
 	table->init.pc = (unsigned long)init_start;
 	table->init.range = init_size;
 	table->address = table_start;
 	table->size = table_size;
-
-	/* See if the linker provided table looks valid. */
-	if (header_size <= 4
-	    || header_start[0] != 1
-	    || (void *)read_pointer(&ptr, end, header_start[1]) != table_start
-	    || header_start[2] == DW_EH_PE_omit
-	    || read_pointer(&ptr, end, header_start[2]) <= 0
-	    || header_start[3] == DW_EH_PE_omit)
-		header_start = NULL;
-
+	/* To avoid the pointer addition with NULL pointer.*/
+	if (header_start != NULL) {
+		const u8 *ptr = header_start + 4;
+		const u8 *end = header_start + header_size;
+		/* See if the linker provided table looks valid. */
+		if (header_size <= 4
+		|| header_start[0] != 1
+		|| (void *)read_pointer(&ptr, end, header_start[1])
+				!= table_start
+		|| header_start[2] == DW_EH_PE_omit
+		|| read_pointer(&ptr, end, header_start[2]) <= 0
+		|| header_start[3] == DW_EH_PE_omit)
+			header_start = NULL;
+	}
 	table->hdrsz = header_size;
 	smp_wmb();
 	table->header = header_start;
@@ -244,14 +245,9 @@ static void swap_eh_frame_hdr_table_entries(void *p1, void *p2, int size)
 {
 	struct eh_frame_hdr_table_entry *e1 = p1;
 	struct eh_frame_hdr_table_entry *e2 = p2;
-	unsigned long v;
-
-	v = e1->start;
-	e1->start = e2->start;
-	e2->start = v;
-	v = e1->fde;
-	e1->fde = e2->fde;
-	e2->fde = v;
+
+	swap(e1->start, e2->start);
+	swap(e1->fde, e2->fde);
 }
 
 static void init_unwind_hdr(struct unwind_table *table,
@@ -259,7 +255,7 @@ static void init_unwind_hdr(struct unwind_table *table,
 {
 	const u8 *ptr;
 	unsigned long tableSize = table->size, hdrSize;
-	unsigned n;
+	unsigned int n;
 	const u32 *fde;
 	struct {
 		u8 version;
@@ -373,6 +369,8 @@ void *unwind_add_table(struct module *module, const void *table_start,
 		       unsigned long table_size)
 {
 	struct unwind_table *table;
+	struct module_memory *core_text;
+	struct module_memory *init_text;
 
 	if (table_size <= 0)
 		return NULL;
@@ -381,11 +379,11 @@ void *unwind_add_table(struct module *module, const void *table_start,
 	if (!table)
 		return NULL;
 
-	init_unwind_table(table, module->name,
-			  module->core_layout.base, module->core_layout.size,
-			  module->init_layout.base, module->init_layout.size,
-			  table_start, table_size,
-			  NULL, 0);
+	core_text = &module->mem[MOD_TEXT];
+	init_text = &module->mem[MOD_INIT_TEXT];
+
+	init_unwind_table(table, module->name, core_text->base, core_text->size,
+			  init_text->base, init_text->size, table_start, table_size, NULL, 0);
 
 	init_unwind_hdr(table, unw_hdr_alloc);
 
@@ -461,7 +459,7 @@ static uleb128_t get_uleb128(const u8 **pcur, const u8 *end)
 {
 	const u8 *cur = *pcur;
 	uleb128_t value;
-	unsigned shift;
+	unsigned int shift;
 
 	for (shift = 0, value = 0; cur < end; shift += 7) {
 		if (shift + 7 > 8 * sizeof(value)
@@ -482,7 +480,7 @@ static sleb128_t get_sleb128(const u8 **pcur, const u8 *end)
 {
 	const u8 *cur = *pcur;
 	sleb128_t value;
-	unsigned shift;
+	unsigned int shift;
 
 	for (shift = 0, value = 0; cur < end; shift += 7) {
 		if (shift + 7 > 8 * sizeof(value)
@@ -608,7 +606,7 @@ static unsigned long read_pointer(const u8 **pLoc, const void *end,
 static signed fde_pointer_type(const u32 *cie)
 {
 	const u8 *ptr = (const u8 *)(cie + 2);
-	unsigned version = *ptr;
+	unsigned int version = *ptr;
 
 	if (*++ptr) {
 		const char *aug;
@@ -903,7 +901,7 @@ int arc_unwind(struct unwind_frame_info *frame)
 	const u8 *ptr = NULL, *end = NULL;
 	unsigned long pc = UNW_PC(frame) - frame->call_frame;
 	unsigned long startLoc = 0, endLoc = 0, cfa;
-	unsigned i;
+	unsigned int i;
 	signed ptrType = -1;
 	uleb128_t retAddrReg = 0;
 	const struct unwind_table *table;
diff --git a/arch/arc/kernel/vmlinux.lds.S b/arch/arc/kernel/vmlinux.lds.S
index 33ce59d91461..549c3f407918 100644
--- a/arch/arc/kernel/vmlinux.lds.S
+++ b/arch/arc/kernel/vmlinux.lds.S
@@ -57,7 +57,6 @@ SECTIONS
 	.init.ramfs : { INIT_RAM_FS }
 
 	. = ALIGN(PAGE_SIZE);
-	_stext = .;
 
 	HEAD_TEXT_SECTION
 	INIT_TEXT_SECTION(L1_CACHE_BYTES)
@@ -83,11 +82,13 @@ SECTIONS
 
 	.text : {
 		_text = .;
+		_stext = .;
 		TEXT_TEXT
 		SCHED_TEXT
-		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.fixup)
 		*(.gnu.warning)
 	}
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index a2fbea3ee07c..55c6de138eae 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -205,93 +205,24 @@ slc_chk:
 #define OP_INV_IC	0x4
 
 /*
- *		I-Cache Aliasing in ARC700 VIPT caches (MMU v1-v3)
+ * Cache Flush programming model
  *
- * ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag.
- * The orig Cache Management Module "CDU" only required paddr to invalidate a
- * certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry.
- * Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching
- * the exact same line.
+ * ARC700 MMUv3 I$ and D$ are both VIPT and can potentially alias.
+ * Programming model requires both paddr and vaddr irrespecive of aliasing
+ * considerations:
+ *  - vaddr in {I,D}C_IV?L
+ *  - paddr in {I,D}C_PTAG
  *
- * However for larger Caches (way-size > page-size) - i.e. in Aliasing config,
- * paddr alone could not be used to correctly index the cache.
+ * In HS38x (MMUv4), D$ is PIPT, I$ is VIPT and can still alias.
+ * Programming model is different for aliasing vs. non-aliasing I$
+ *  - D$ / Non-aliasing I$: only paddr in {I,D}C_IV?L
+ *  - Aliasing I$: same as ARC700 above (so MMUv3 routine used for MMUv4 I$)
  *
- * ------------------
- * MMU v1/v2 (Fixed Page Size 8k)
- * ------------------
- * The solution was to provide CDU with these additonal vaddr bits. These
- * would be bits [x:13], x would depend on cache-geometry, 13 comes from
- * standard page size of 8k.
- * H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits
- * of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the
- * orig 5 bits of paddr were anyways ignored by CDU line ops, as they
- * represent the offset within cache-line. The adv of using this "clumsy"
- * interface for additional info was no new reg was needed in CDU programming
- * model.
- *
- * 17:13 represented the max num of bits passable, actual bits needed were
- * fewer, based on the num-of-aliases possible.
- * -for 2 alias possibility, only bit 13 needed (32K cache)
- * -for 4 alias possibility, bits 14:13 needed (64K cache)
- *
- * ------------------
- * MMU v3
- * ------------------
- * This ver of MMU supports variable page sizes (1k-16k): although Linux will
- * only support 8k (default), 16k and 4k.
- * However from hardware perspective, smaller page sizes aggravate aliasing
- * meaning more vaddr bits needed to disambiguate the cache-line-op ;
- * the existing scheme of piggybacking won't work for certain configurations.
- * Two new registers IC_PTAG and DC_PTAG inttoduced.
- * "tag" bits are provided in PTAG, index bits in existing IVIL/IVDL/FLDL regs
+ *  - If PAE40 is enabled, independent of aliasing considerations, the higher
+ *    bits needs to be written into PTAG_HI
  */
 
 static inline
-void __cache_line_loop_v2(phys_addr_t paddr, unsigned long vaddr,
-			  unsigned long sz, const int op, const int full_page)
-{
-	unsigned int aux_cmd;
-	int num_lines;
-
-	if (op == OP_INV_IC) {
-		aux_cmd = ARC_REG_IC_IVIL;
-	} else {
-		/* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */
-		aux_cmd = op & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
-	}
-
-	/* Ensure we properly floor/ceil the non-line aligned/sized requests
-	 * and have @paddr - aligned to cache line and integral @num_lines.
-	 * This however can be avoided for page sized since:
-	 *  -@paddr will be cache-line aligned already (being page aligned)
-	 *  -@sz will be integral multiple of line size (being page sized).
-	 */
-	if (!full_page) {
-		sz += paddr & ~CACHE_LINE_MASK;
-		paddr &= CACHE_LINE_MASK;
-		vaddr &= CACHE_LINE_MASK;
-	}
-
-	num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES);
-
-	/* MMUv2 and before: paddr contains stuffed vaddrs bits */
-	paddr |= (vaddr >> PAGE_SHIFT) & 0x1F;
-
-	while (num_lines-- > 0) {
-		write_aux_reg(aux_cmd, paddr);
-		paddr += L1_CACHE_BYTES;
-	}
-}
-
-/*
- * For ARC700 MMUv3 I-cache and D-cache flushes
- *  - ARC700 programming model requires paddr and vaddr be passed in seperate
- *    AUX registers (*_IV*L and *_PTAG respectively) irrespective of whether the
- *    caches actually alias or not.
- * -  For HS38, only the aliasing I-cache configuration uses the PTAG reg
- *    (non aliasing I-cache version doesn't; while D-cache can't possibly alias)
- */
-static inline
 void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr,
 			  unsigned long sz, const int op, const int full_page)
 {
@@ -350,17 +281,6 @@ void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr,
 #ifndef USE_RGN_FLSH
 
 /*
- * In HS38x (MMU v4), I-cache is VIPT (can alias), D-cache is PIPT
- * Here's how cache ops are implemented
- *
- *  - D-cache: only paddr needed (in DC_IVDL/DC_FLDL)
- *  - I-cache Non Aliasing: Despite VIPT, only paddr needed (in IC_IVIL)
- *  - I-cache Aliasing: Both vaddr and paddr needed (in IC_IVIL, IC_PTAG
- *    respectively, similar to MMU v3 programming model, hence
- *    __cache_line_loop_v3() is used)
- *
- * If PAE40 is enabled, independent of aliasing considerations, the higher bits
- * needs to be written into PTAG_HI
  */
 static inline
 void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr,
@@ -460,11 +380,9 @@ void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr,
 
 #endif
 
-#if (CONFIG_ARC_MMU_VER < 3)
-#define __cache_line_loop	__cache_line_loop_v2
-#elif (CONFIG_ARC_MMU_VER == 3)
+#ifdef CONFIG_ARC_MMU_V3
 #define __cache_line_loop	__cache_line_loop_v3
-#elif (CONFIG_ARC_MMU_VER > 3)
+#else
 #define __cache_line_loop	__cache_line_loop_v4
 #endif
 
@@ -483,7 +401,7 @@ static inline void __before_dc_op(const int op)
 {
 	if (op == OP_FLUSH_N_INV) {
 		/* Dcache provides 2 cmd: FLUSH or INV
-		 * INV inturn has sub-modes: DISCARD or FLUSH-BEFORE
+		 * INV in turn has sub-modes: DISCARD or FLUSH-BEFORE
 		 * flush-n-inv is achieved by INV cmd but with IM=1
 		 * So toggle INV sub-mode depending on op request and default
 		 */
@@ -832,7 +750,7 @@ static inline void arc_slc_enable(void)
  *  -In SMP, if hardware caches are coherent
  *
  * There's a corollary case, where kernel READs from a userspace mapped page.
- * If the U-mapping is not congruent to to K-mapping, former needs flushing.
+ * If the U-mapping is not congruent to K-mapping, former needs flushing.
  */
 void flush_dcache_page(struct page *page)
 {
@@ -992,7 +910,7 @@ EXPORT_SYMBOL(flush_icache_range);
  * @vaddr is typically user vaddr (breakpoint) or kernel vaddr (vmalloc)
  *    However in one instance, when called by kprobe (for a breakpt in
  *    builtin kernel code) @vaddr will be paddr only, meaning CDU operation will
- *    use a paddr to index the cache (despite VIPT). This is fine since since a
+ *    use a paddr to index the cache (despite VIPT). This is fine since a
  *    builtin kernel page will not have any virtual mappings.
  *    kprobe on loadable module will be kernel vaddr.
  */
@@ -1123,7 +1041,7 @@ void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
 	clear_page(to);
 	clear_bit(PG_dc_clean, &page->flags);
 }
-
+EXPORT_SYMBOL(clear_user_page);
 
 /**********************************************************************
  * Explicit Cache flush request from user space via syscall
diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c
index 517988e60cfc..2a7fbbb83b70 100644
--- a/arch/arc/mm/dma.c
+++ b/arch/arc/mm/dma.c
@@ -32,7 +32,7 @@ void arch_dma_prep_coherent(struct page *page, size_t size)
 
 /*
  * Cache operations depending on function and direction argument, inspired by
- * https://lkml.org/lkml/2018/5/18/979
+ * https://lore.kernel.org/lkml/20180518175004.GF17671@n2100.armlinux.org.uk
  * "dma_sync_*_for_cpu and direction=TO_DEVICE (was Re: [PATCH 02/20]
  * dma-mapping: provide a generic dma-noncoherent implementation)"
  *
diff --git a/arch/arc/mm/extable.c b/arch/arc/mm/extable.c
index b06b09ddf924..4e14c4244ea2 100644
--- a/arch/arc/mm/extable.c
+++ b/arch/arc/mm/extable.c
@@ -32,16 +32,4 @@ unsigned long arc_clear_user_noinline(void __user *to,
 }
 EXPORT_SYMBOL(arc_clear_user_noinline);
 
-long arc_strncpy_from_user_noinline(char *dst, const char __user *src,
-		long count)
-{
-	return __arc_strncpy_from_user(dst, src, count);
-}
-EXPORT_SYMBOL(arc_strncpy_from_user_noinline);
-
-long arc_strnlen_user_noinline(const char __user *src, long n)
-{
-	return __arc_strnlen_user(src, n);
-}
-EXPORT_SYMBOL(arc_strnlen_user_noinline);
 #endif
diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c
index f5657cb68e4f..5ca59a482632 100644
--- a/arch/arc/mm/fault.c
+++ b/arch/arc/mm/fault.c
@@ -33,28 +33,34 @@ noinline static int handle_kernel_vaddr_fault(unsigned long address)
 	pud_t *pud, *pud_k;
 	pmd_t *pmd, *pmd_k;
 
-	pgd = pgd_offset_fast(current->active_mm, address);
+	pgd = pgd_offset(current->active_mm, address);
 	pgd_k = pgd_offset_k(address);
 
-	if (!pgd_present(*pgd_k))
+	if (pgd_none (*pgd_k))
 		goto bad_area;
+	if (!pgd_present(*pgd))
+		set_pgd(pgd, *pgd_k);
 
 	p4d = p4d_offset(pgd, address);
 	p4d_k = p4d_offset(pgd_k, address);
-	if (!p4d_present(*p4d_k))
+	if (p4d_none(*p4d_k))
 		goto bad_area;
+	if (!p4d_present(*p4d))
+		set_p4d(p4d, *p4d_k);
 
 	pud = pud_offset(p4d, address);
 	pud_k = pud_offset(p4d_k, address);
-	if (!pud_present(*pud_k))
+	if (pud_none(*pud_k))
 		goto bad_area;
+	if (!pud_present(*pud))
+		set_pud(pud, *pud_k);
 
 	pmd = pmd_offset(pud, address);
 	pmd_k = pmd_offset(pud_k, address);
-	if (!pmd_present(*pmd_k))
+	if (pmd_none(*pmd_k))
 		goto bad_area;
-
-	set_pmd(pmd, *pmd_k);
+	if (!pmd_present(*pmd))
+		set_pmd(pmd, *pmd_k);
 
 	/* XXX: create the TLB entry here */
 	return 0;
@@ -140,11 +146,14 @@ retry:
 		return;
 	}
 
+	/* The fault is fully completed (including releasing mmap lock) */
+	if (fault & VM_FAULT_COMPLETED)
+		return;
+
 	/*
 	 * Fault retry nuances, mmap_lock already relinquished by core mm
 	 */
-	if (unlikely((fault & VM_FAULT_RETRY) &&
-		     (flags & FAULT_FLAG_ALLOW_RETRY))) {
+	if (unlikely(fault & VM_FAULT_RETRY)) {
 		flags |= FAULT_FLAG_TRIED;
 		goto retry;
 	}
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index ce07e697916c..2b89b6c53801 100644
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -32,11 +32,6 @@ unsigned long arch_pfn_offset;
 EXPORT_SYMBOL(arch_pfn_offset);
 #endif
 
-#ifdef CONFIG_DISCONTIGMEM
-struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL(node_data);
-#endif
-
 long __init arc_get_mem_sz(void)
 {
 	return low_mem_sz;
@@ -64,13 +59,13 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 
 		low_mem_sz = size;
 		in_use = 1;
-		memblock_add_node(base, size, 0);
+		memblock_add_node(base, size, 0, MEMBLOCK_NONE);
 	} else {
 #ifdef CONFIG_HIGHMEM
 		high_mem_start = base;
 		high_mem_sz = size;
 		in_use = 1;
-		memblock_add_node(base, size, 1);
+		memblock_add_node(base, size, 1, MEMBLOCK_NONE);
 		memblock_reserve(base, size);
 #endif
 	}
@@ -79,11 +74,6 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 		base, TO_MB(size), !in_use ? "Not used":"");
 }
 
-bool arch_has_descending_max_zone_pfns(void)
-{
-	return !IS_ENABLED(CONFIG_ARC_HAS_PAE40);
-}
-
 /*
  * First memory setup routine called from setup_arch()
  * 1. setup swapper's mm @init_mm
@@ -94,10 +84,7 @@ void __init setup_arch_memory(void)
 {
 	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
 
-	init_mm.start_code = (unsigned long)_text;
-	init_mm.end_code = (unsigned long)_etext;
-	init_mm.end_data = (unsigned long)_edata;
-	init_mm.brk = (unsigned long)_end;
+	setup_initial_init_mm(_text, _etext, _edata, _end);
 
 	/* first page of system - kernel .vector starts here */
 	min_low_pfn = virt_to_pfn(CONFIG_LINUX_RAM_BASE);
@@ -139,25 +126,28 @@ void __init setup_arch_memory(void)
 
 #ifdef CONFIG_HIGHMEM
 	/*
-	 * Populate a new node with highmem
-	 *
 	 * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
-	 * than addresses in normal ala low memory (0x8000_0000 based).
+	 * than addresses in normal aka low memory (0x8000_0000 based).
 	 * Even with PAE, the huge peripheral space hole would waste a lot of
-	 * mem with single mem_map[]. This warrants a mem_map per region design.
-	 * Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM.
-	 *
-	 * DISCONTIGMEM in turns requires multiple nodes. node 0 above is
-	 * populated with normal memory zone while node 1 only has highmem
+	 * mem with single contiguous mem_map[].
+	 * Thus when HIGHMEM on ARC is enabled the memory map corresponding
+	 * to the hole is freed and ARC specific version of pfn_valid()
+	 * handles the hole in the memory map.
 	 */
-#ifdef CONFIG_DISCONTIGMEM
-	node_set_online(1);
-#endif
 
 	min_high_pfn = PFN_DOWN(high_mem_start);
 	max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
 
-	max_zone_pfn[ZONE_HIGHMEM] = min_low_pfn;
+	/*
+	 * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE.
+	 * For HIGHMEM without PAE max_high_pfn should be less than
+	 * min_low_pfn to guarantee that these two regions don't overlap.
+	 * For PAE case highmem is greater than lowmem, so it is natural
+	 * to use max_high_pfn.
+	 *
+	 * In both cases, holes should be handled by pfn_valid().
+	 */
+	max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
 
 	high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
 
@@ -178,7 +168,7 @@ static void __init highmem_init(void)
 #ifdef CONFIG_HIGHMEM
 	unsigned long tmp;
 
-	memblock_free(high_mem_start, high_mem_sz);
+	memblock_phys_free(high_mem_start, high_mem_sz);
 	for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
 		free_highmem_page(pfn_to_page(tmp));
 #endif
@@ -194,7 +184,11 @@ void __init mem_init(void)
 {
 	memblock_free_all();
 	highmem_init();
-	mem_init_print_info(NULL);
+
+	BUILD_BUG_ON((PTRS_PER_PGD * sizeof(pgd_t)) > PAGE_SIZE);
+	BUILD_BUG_ON((PTRS_PER_PUD * sizeof(pud_t)) > PAGE_SIZE);
+	BUILD_BUG_ON((PTRS_PER_PMD * sizeof(pmd_t)) > PAGE_SIZE);
+	BUILD_BUG_ON((PTRS_PER_PTE * sizeof(pte_t)) > PAGE_SIZE);
 }
 
 #ifdef CONFIG_HIGHMEM
diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c
index fac4adc90204..712c2311daef 100644
--- a/arch/arc/mm/ioremap.c
+++ b/arch/arc/mm/ioremap.c
@@ -39,7 +39,8 @@ void __iomem *ioremap(phys_addr_t paddr, unsigned long size)
 	if (arc_uncached_addr_space(paddr))
 		return (void __iomem *)(u32)paddr;
 
-	return ioremap_prot(paddr, size, PAGE_KERNEL_NO_CACHE);
+	return ioremap_prot(paddr, size,
+			    pgprot_val(pgprot_noncached(PAGE_KERNEL)));
 }
 EXPORT_SYMBOL(ioremap);
 
@@ -53,9 +54,10 @@ EXPORT_SYMBOL(ioremap);
 void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 			   unsigned long flags)
 {
+	unsigned int off;
 	unsigned long vaddr;
 	struct vm_struct *area;
-	phys_addr_t off, end;
+	phys_addr_t end;
 	pgprot_t prot = __pgprot(flags);
 
 	/* Don't allow wraparound, zero size */
@@ -72,7 +74,7 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 
 	/* Mappings have to be page-aligned */
 	off = paddr & ~PAGE_MASK;
-	paddr &= PAGE_MASK;
+	paddr &= PAGE_MASK_PHYS;
 	size = PAGE_ALIGN(end + 1) - paddr;
 
 	/*
@@ -92,7 +94,7 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 EXPORT_SYMBOL(ioremap_prot);
 
 
-void iounmap(const void __iomem *addr)
+void iounmap(const volatile void __iomem *addr)
 {
 	/* weird double cast to handle phys_addr_t > 32 bits */
 	if (arc_uncached_addr_space((phys_addr_t)(u32)addr))
diff --git a/arch/arc/mm/mmap.c b/arch/arc/mm/mmap.c
index 722d26b94307..fce5fa2b4f52 100644
--- a/arch/arc/mm/mmap.c
+++ b/arch/arc/mm/mmap.c
@@ -74,3 +74,23 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	info.align_offset = pgoff << PAGE_SHIFT;
 	return vm_unmapped_area(&info);
 }
+
+static const pgprot_t protection_map[16] = {
+	[VM_NONE]					= PAGE_U_NONE,
+	[VM_READ]					= PAGE_U_R,
+	[VM_WRITE]					= PAGE_U_R,
+	[VM_WRITE | VM_READ]				= PAGE_U_R,
+	[VM_EXEC]					= PAGE_U_X_R,
+	[VM_EXEC | VM_READ]				= PAGE_U_X_R,
+	[VM_EXEC | VM_WRITE]				= PAGE_U_X_R,
+	[VM_EXEC | VM_WRITE | VM_READ]			= PAGE_U_X_R,
+	[VM_SHARED]					= PAGE_U_NONE,
+	[VM_SHARED | VM_READ]				= PAGE_U_R,
+	[VM_SHARED | VM_WRITE]				= PAGE_U_W_R,
+	[VM_SHARED | VM_WRITE | VM_READ]		= PAGE_U_W_R,
+	[VM_SHARED | VM_EXEC]				= PAGE_U_X_R,
+	[VM_SHARED | VM_EXEC | VM_READ]			= PAGE_U_X_R,
+	[VM_SHARED | VM_EXEC | VM_WRITE]		= PAGE_U_X_W_R,
+	[VM_SHARED | VM_EXEC | VM_WRITE | VM_READ]	= PAGE_U_X_W_R
+};
+DECLARE_VM_GET_PAGE_PROT
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 9bb3c24f3677..5f71445f26bd 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -1,51 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * TLB Management (flush/create/diagnostics) for ARC700
+ * TLB Management (flush/create/diagnostics) for MMUv3 and MMUv4
  *
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  *
- * vineetg: Aug 2011
- *  -Reintroduce duplicate PD fixup - some customer chips still have the issue
- *
- * vineetg: May 2011
- *  -No need to flush_cache_page( ) for each call to update_mmu_cache()
- *   some of the LMBench tests improved amazingly
- *      = page-fault thrice as fast (75 usec to 28 usec)
- *      = mmap twice as fast (9.6 msec to 4.6 msec),
- *      = fork (5.3 msec to 3.7 msec)
- *
- * vineetg: April 2011 :
- *  -MMU v3: PD{0,1} bits layout changed: They don't overlap anymore,
- *      helps avoid a shift when preparing PD0 from PTE
- *
- * vineetg: April 2011 : Preparing for MMU V3
- *  -MMU v2/v3 BCRs decoded differently
- *  -Remove TLB_SIZE hardcoding as it's variable now: 256 or 512
- *  -tlb_entry_erase( ) can be void
- *  -local_flush_tlb_range( ):
- *      = need not "ceil" @end
- *      = walks MMU only if range spans < 32 entries, as opposed to 256
- *
- * Vineetg: Sept 10th 2008
- *  -Changes related to MMU v2 (Rel 4.8)
- *
- * Vineetg: Aug 29th 2008
- *  -In TLB Flush operations (Metal Fix MMU) there is a explicit command to
- *    flush Micro-TLBS. If TLB Index Reg is invalid prior to TLBIVUTLB cmd,
- *    it fails. Thus need to load it with ANY valid value before invoking
- *    TLBIVUTLB cmd
- *
- * Vineetg: Aug 21th 2008:
- *  -Reduced the duration of IRQ lockouts in TLB Flush routines
- *  -Multiple copies of TLB erase code separated into a "single" function
- *  -In TLB Flush routines, interrupt disabling moved UP to retrieve ASID
- *       in interrupt-safe region.
- *
- * Vineetg: April 23rd Bug #93131
- *    Problem: tlb_flush_kernel_range() doesn't do anything if the range to
- *              flush is more than the size of TLB itself.
- *
- * Rahul Trivedi : Codito Technologies 2004
  */
 
 #include <linux/module.h>
@@ -57,47 +15,6 @@
 #include <asm/mmu_context.h>
 #include <asm/mmu.h>
 
-/*			Need for ARC MMU v2
- *
- * ARC700 MMU-v1 had a Joint-TLB for Code and Data and is 2 way set-assoc.
- * For a memcpy operation with 3 players (src/dst/code) such that all 3 pages
- * map into same set, there would be contention for the 2 ways causing severe
- * Thrashing.
- *
- * Although J-TLB is 2 way set assoc, ARC700 caches J-TLB into uTLBS which has
- * much higher associativity. u-D-TLB is 8 ways, u-I-TLB is 4 ways.
- * Given this, the thrashing problem should never happen because once the 3
- * J-TLB entries are created (even though 3rd will knock out one of the prev
- * two), the u-D-TLB and u-I-TLB will have what is required to accomplish memcpy
- *
- * Yet we still see the Thrashing because a J-TLB Write cause flush of u-TLBs.
- * This is a simple design for keeping them in sync. So what do we do?
- * The solution which James came up was pretty neat. It utilised the assoc
- * of uTLBs by not invalidating always but only when absolutely necessary.
- *
- * - Existing TLB commands work as before
- * - New command (TLBWriteNI) for TLB write without clearing uTLBs
- * - New command (TLBIVUTLB) to invalidate uTLBs.
- *
- * The uTLBs need only be invalidated when pages are being removed from the
- * OS page table. If a 'victim' TLB entry is being overwritten in the main TLB
- * as a result of a miss, the removed entry is still allowed to exist in the
- * uTLBs as it is still valid and present in the OS page table. This allows the
- * full associativity of the uTLBs to hide the limited associativity of the main
- * TLB.
- *
- * During a miss handler, the new "TLBWriteNI" command is used to load
- * entries without clearing the uTLBs.
- *
- * When the OS page table is updated, TLB entries that may be associated with a
- * removed page are removed (flushed) from the TLB using TLBWrite. In this
- * circumstance, the uTLBs must also be cleared. This is done by using the
- * existing TLBWrite command. An explicit IVUTLB is also required for those
- * corner cases when TLBWrite was not executed at all because the corresp
- * J-TLB entry got evicted/replaced.
- */
-
-
 /* A copy of the ASID from the PID reg is kept in asid_cache */
 DEFINE_PER_CPU(unsigned int, asid_cache) = MM_CTXT_FIRST_CYCLE;
 
@@ -120,32 +37,10 @@ static inline void __tlb_entry_erase(void)
 
 static void utlb_invalidate(void)
 {
-#if (CONFIG_ARC_MMU_VER >= 2)
-
-#if (CONFIG_ARC_MMU_VER == 2)
-	/* MMU v2 introduced the uTLB Flush command.
-	 * There was however an obscure hardware bug, where uTLB flush would
-	 * fail when a prior probe for J-TLB (both totally unrelated) would
-	 * return lkup err - because the entry didn't exist in MMU.
-	 * The Workaround was to set Index reg with some valid value, prior to
-	 * flush. This was fixed in MMU v3
-	 */
-	unsigned int idx;
-
-	/* make sure INDEX Reg is valid */
-	idx = read_aux_reg(ARC_REG_TLBINDEX);
-
-	/* If not write some dummy val */
-	if (unlikely(idx & TLB_LKUP_ERR))
-		write_aux_reg(ARC_REG_TLBINDEX, 0xa);
-#endif
-
 	write_aux_reg(ARC_REG_TLBCOMMAND, TLBIVUTLB);
-#endif
-
 }
 
-#if (CONFIG_ARC_MMU_VER < 4)
+#ifdef CONFIG_ARC_MMU_V3
 
 static inline unsigned int tlb_entry_lkup(unsigned long vaddr_n_asid)
 {
@@ -176,7 +71,7 @@ static void tlb_entry_erase(unsigned int vaddr_n_asid)
 	}
 }
 
-static void tlb_entry_insert(unsigned int pd0, pte_t pd1)
+static void tlb_entry_insert(unsigned int pd0, phys_addr_t pd1)
 {
 	unsigned int idx;
 
@@ -206,7 +101,7 @@ static void tlb_entry_insert(unsigned int pd0, pte_t pd1)
 	write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
 }
 
-#else	/* CONFIG_ARC_MMU_VER >= 4) */
+#else	/* MMUv4 */
 
 static void tlb_entry_erase(unsigned int vaddr_n_asid)
 {
@@ -214,13 +109,16 @@ static void tlb_entry_erase(unsigned int vaddr_n_asid)
 	write_aux_reg(ARC_REG_TLBCOMMAND, TLBDeleteEntry);
 }
 
-static void tlb_entry_insert(unsigned int pd0, pte_t pd1)
+static void tlb_entry_insert(unsigned int pd0, phys_addr_t pd1)
 {
 	write_aux_reg(ARC_REG_TLBPD0, pd0);
-	write_aux_reg(ARC_REG_TLBPD1, pd1);
 
-	if (is_pae40_enabled())
+	if (!is_pae40_enabled()) {
+		write_aux_reg(ARC_REG_TLBPD1, pd1);
+	} else {
+		write_aux_reg(ARC_REG_TLBPD1, pd1 & 0xFFFFFFFF);
 		write_aux_reg(ARC_REG_TLBPD1HI, (u64)pd1 >> 32);
+	}
 
 	write_aux_reg(ARC_REG_TLBCOMMAND, TLBInsertEntry);
 }
@@ -496,7 +394,7 @@ void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
 	unsigned long flags;
 	unsigned int asid_or_sasid, rwx;
 	unsigned long pd0;
-	pte_t pd1;
+	phys_addr_t pd1;
 
 	/*
 	 * create_tlb() assumes that current->mm == vma->mm, since
@@ -505,7 +403,6 @@ void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
 	 *
 	 * Removing the assumption involves
 	 * -Using vma->mm->context{ASID,SASID}, as opposed to MMU reg.
-	 * -Fix the TLB paranoid debug code to not trigger false negatives.
 	 * -More importantly it makes this handler inconsistent with fast-path
 	 *  TLB Refill handler which always deals with "current"
 	 *
@@ -528,8 +425,6 @@ void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
 
 	local_irq_save(flags);
 
-	tlb_paranoid_check(asid_mm(vma->vm_mm, smp_processor_id()), vaddr);
-
 	vaddr &= PAGE_MASK;
 
 	/* update this PTE credentials */
@@ -576,7 +471,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
 		      pte_t *ptep)
 {
 	unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
-	phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK;
+	phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK_PHYS;
 	struct page *page = pfn_to_page(pte_pfn(*ptep));
 
 	create_tlb(vma, vaddr, ptep);
@@ -639,43 +534,6 @@ void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
 	update_mmu_cache(vma, addr, &pte);
 }
 
-void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
-				pgtable_t pgtable)
-{
-	struct list_head *lh = (struct list_head *) pgtable;
-
-	assert_spin_locked(&mm->page_table_lock);
-
-	/* FIFO */
-	if (!pmd_huge_pte(mm, pmdp))
-		INIT_LIST_HEAD(lh);
-	else
-		list_add(lh, (struct list_head *) pmd_huge_pte(mm, pmdp));
-	pmd_huge_pte(mm, pmdp) = pgtable;
-}
-
-pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp)
-{
-	struct list_head *lh;
-	pgtable_t pgtable;
-
-	assert_spin_locked(&mm->page_table_lock);
-
-	pgtable = pmd_huge_pte(mm, pmdp);
-	lh = (struct list_head *) pgtable;
-	if (list_empty(lh))
-		pmd_huge_pte(mm, pmdp) = NULL;
-	else {
-		pmd_huge_pte(mm, pmdp) = (pgtable_t) lh->next;
-		list_del(lh);
-	}
-
-	pte_val(pgtable[0]) = 0;
-	pte_val(pgtable[1]) = 0;
-
-	return pgtable;
-}
-
 void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			       unsigned long end)
 {
@@ -706,14 +564,6 @@ void read_decode_mmu_bcr(void)
 {
 	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
 	unsigned int tmp;
-	struct bcr_mmu_1_2 {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int ver:8, ways:4, sets:4, u_itlb:8, u_dtlb:8;
-#else
-		unsigned int u_dtlb:8, u_itlb:8, sets:4, ways:4, ver:8;
-#endif
-	} *mmu2;
-
 	struct bcr_mmu_3 {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int ver:8, ways:4, sets:4, res:3, sasid:1, pg_sz:4,
@@ -738,23 +588,14 @@ void read_decode_mmu_bcr(void)
 	tmp = read_aux_reg(ARC_REG_MMU_BCR);
 	mmu->ver = (tmp >> 24);
 
-	if (is_isa_arcompact()) {
-		if (mmu->ver <= 2) {
-			mmu2 = (struct bcr_mmu_1_2 *)&tmp;
-			mmu->pg_sz_k = TO_KB(0x2000);
-			mmu->sets = 1 << mmu2->sets;
-			mmu->ways = 1 << mmu2->ways;
-			mmu->u_dtlb = mmu2->u_dtlb;
-			mmu->u_itlb = mmu2->u_itlb;
-		} else {
-			mmu3 = (struct bcr_mmu_3 *)&tmp;
-			mmu->pg_sz_k = 1 << (mmu3->pg_sz - 1);
-			mmu->sets = 1 << mmu3->sets;
-			mmu->ways = 1 << mmu3->ways;
-			mmu->u_dtlb = mmu3->u_dtlb;
-			mmu->u_itlb = mmu3->u_itlb;
-			mmu->sasid = mmu3->sasid;
-		}
+	if (is_isa_arcompact() && mmu->ver == 3) {
+		mmu3 = (struct bcr_mmu_3 *)&tmp;
+		mmu->pg_sz_k = 1 << (mmu3->pg_sz - 1);
+		mmu->sets = 1 << mmu3->sets;
+		mmu->ways = 1 << mmu3->ways;
+		mmu->u_dtlb = mmu3->u_dtlb;
+		mmu->u_itlb = mmu3->u_itlb;
+		mmu->sasid = mmu3->sasid;
 	} else {
 		mmu4 = (struct bcr_mmu_4 *)&tmp;
 		mmu->pg_sz_k = 1 << (mmu4->sz0 - 1);
@@ -780,8 +621,8 @@ char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
 			  IS_USED_CFG(CONFIG_TRANSPARENT_HUGEPAGE));
 
 	n += scnprintf(buf + n, len - n,
-		      "MMU [v%x]\t: %dk PAGE, %sJTLB %d (%dx%d), uDTLB %d, uITLB %d%s%s\n",
-		       p_mmu->ver, p_mmu->pg_sz_k, super_pg,
+		      "MMU [v%x]\t: %dk PAGE, %s, swalk %d lvl, JTLB %d (%dx%d), uDTLB %d, uITLB %d%s%s\n",
+		       p_mmu->ver, p_mmu->pg_sz_k, super_pg,  CONFIG_PGTABLE_LEVELS,
 		       p_mmu->sets * p_mmu->ways, p_mmu->sets, p_mmu->ways,
 		       p_mmu->u_dtlb, p_mmu->u_itlb,
 		       IS_AVAIL2(p_mmu->pae, ", PAE40 ", CONFIG_ARC_HAS_PAE40));
@@ -815,22 +656,17 @@ void arc_mmu_init(void)
 
 	/*
 	 * Ensure that MMU features assumed by kernel exist in hardware.
-	 * For older ARC700 cpus, it has to be exact match, since the MMU
-	 * revisions were not backwards compatible (MMUv3 TLB layout changed
-	 * so even if kernel for v2 didn't use any new cmds of v3, it would
-	 * still not work.
-	 * For HS cpus, MMUv4 was baseline and v5 is backwards compatible
-	 * (will run older software).
+	 *  - For older ARC700 cpus, only v3 supported
+	 *  - For HS cpus, v4 was baseline and v5 is backwards compatible
+	 *    (will run older software).
 	 */
-	if (is_isa_arcompact() && mmu->ver == CONFIG_ARC_MMU_VER)
+	if (is_isa_arcompact() && mmu->ver == 3)
 		compat = 1;
-	else if (is_isa_arcv2() && mmu->ver >= CONFIG_ARC_MMU_VER)
+	else if (is_isa_arcv2() && mmu->ver >= 4)
 		compat = 1;
 
-	if (!compat) {
-		panic("MMU ver %d doesn't match kernel built for %d...\n",
-		      mmu->ver, CONFIG_ARC_MMU_VER);
-	}
+	if (!compat)
+		panic("MMU ver %d doesn't match kernel built for\n", mmu->ver);
 
 	if (mmu->pg_sz_k != TO_KB(PAGE_SIZE))
 		panic("MMU pg size != PAGE_SIZE (%luk)\n", TO_KB(PAGE_SIZE));
@@ -843,14 +679,11 @@ void arc_mmu_init(void)
 	if (IS_ENABLED(CONFIG_ARC_HAS_PAE40) && !mmu->pae)
 		panic("Hardware doesn't support PAE40\n");
 
-	/* Enable the MMU */
-	write_aux_reg(ARC_REG_PID, MMU_ENABLE);
+	/* Enable the MMU with ASID 0 */
+	mmu_setup_asid(NULL, 0);
 
-	/* In smp we use this reg for interrupt 1 scratch */
-#ifdef ARC_USE_SCRATCH_REG
-	/* swapper_pg_dir is the pgd for the kernel, used by vmalloc */
-	write_aux_reg(ARC_REG_SCRATCH_DATA0, swapper_pg_dir);
-#endif
+	/* cache the pgd pointer in MMU SCRATCH reg (ARCv2 only) */
+	mmu_setup_pgd(NULL, swapper_pg_dir);
 
 	if (pae40_exist_but_not_enab())
 		write_aux_reg(ARC_REG_TLBPD1HI, 0);
@@ -945,40 +778,3 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 
 	local_irq_restore(flags);
 }
-
-/***********************************************************************
- * Diagnostic Routines
- *  -Called from Low Level TLB Handlers if things don;t look good
- **********************************************************************/
-
-#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
-
-/*
- * Low Level ASM TLB handler calls this if it finds that HW and SW ASIDS
- * don't match
- */
-void print_asid_mismatch(int mm_asid, int mmu_asid, int is_fast_path)
-{
-	pr_emerg("ASID Mismatch in %s Path Handler: sw-pid=0x%x hw-pid=0x%x\n",
-	       is_fast_path ? "Fast" : "Slow", mm_asid, mmu_asid);
-
-	__asm__ __volatile__("flag 1");
-}
-
-void tlb_paranoid_check(unsigned int mm_asid, unsigned long addr)
-{
-	unsigned int mmu_asid;
-
-	mmu_asid = read_aux_reg(ARC_REG_PID) & 0xff;
-
-	/*
-	 * At the time of a TLB miss/installation
-	 *   - HW version needs to match SW version
-	 *   - SW needs to have a valid ASID
-	 */
-	if (addr < 0x70000000 &&
-	    ((mm_asid == MM_CTXT_NO_ASID) ||
-	      (mmu_asid != (mm_asid & MM_CTXT_ASID_MASK))))
-		print_asid_mismatch(mm_asid, mmu_asid, 0);
-}
-#endif
diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
index 062fae46c3f8..e054780a8fe0 100644
--- a/arch/arc/mm/tlbex.S
+++ b/arch/arc/mm/tlbex.S
@@ -39,7 +39,6 @@
 #include <asm/arcregs.h>
 #include <asm/cache.h>
 #include <asm/processor.h>
-#include <asm/tlb-mmu1.h>
 
 #ifdef CONFIG_ISA_ARCOMPACT
 ;-----------------------------------------------------------------
@@ -94,11 +93,6 @@ ex_saved_reg1:
 	st_s  r1, [r0, 4]
 	st_s  r2, [r0, 8]
 	st_s  r3, [r0, 12]
-
-	; VERIFY if the ASID in MMU-PID Reg is same as
-	; one in Linux data structures
-
-	tlb_paranoid_check_asm
 .endm
 
 .macro TLBMISS_RESTORE_REGS
@@ -148,53 +142,16 @@ ex_saved_reg1:
 #endif
 
 ;============================================================================
-;  Troubleshooting Stuff
+;TLB Miss handling Code
 ;============================================================================
 
-; Linux keeps ASID (Address Space ID) in task->active_mm->context.asid
-; When Creating TLB Entries, instead of doing 3 dependent loads from memory,
-; we use the MMU PID Reg to get current ASID.
-; In bizzare scenrios SW and HW ASID can get out-of-sync which is trouble.
-; So we try to detect this in TLB Mis shandler
-
-.macro tlb_paranoid_check_asm
-
-#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
-
-	GET_CURR_TASK_ON_CPU  r3
-	ld r0, [r3, TASK_ACT_MM]
-	ld r0, [r0, MM_CTXT+MM_CTXT_ASID]
-	breq r0, 0, 55f	; Error if no ASID allocated
-
-	lr r1, [ARC_REG_PID]
-	and r1, r1, 0xFF
-
-	and r2, r0, 0xFF	; MMU PID bits only for comparison
-	breq r1, r2, 5f
-
-55:
-	; Error if H/w and S/w ASID don't match, but NOT if in kernel mode
-	lr  r2, [erstatus]
-	bbit0 r2, STATUS_U_BIT, 5f
-
-	; We sure are in troubled waters, Flag the error, but to do so
-	; need to switch to kernel mode stack to call error routine
-	GET_TSK_STACK_BASE   r3, sp
-
-	; Call printk to shoutout aloud
-	mov r2, 1
-	j print_asid_mismatch
-
-5:	; ASIDs match so proceed normally
-	nop
-
+#ifndef PMD_SHIFT
+#define PMD_SHIFT PUD_SHIFT
 #endif
 
-.endm
-
-;============================================================================
-;TLB Miss handling Code
-;============================================================================
+#ifndef PUD_SHIFT
+#define PUD_SHIFT PGDIR_SHIFT
+#endif
 
 ;-----------------------------------------------------------------------------
 ; This macro does the page-table lookup for the faulting address.
@@ -203,7 +160,7 @@ ex_saved_reg1:
 
 	lr  r2, [efa]
 
-#ifdef ARC_USE_SCRATCH_REG
+#ifdef CONFIG_ISA_ARCV2
 	lr  r1, [ARC_REG_SCRATCH_DATA0] ; current pgd
 #else
 	GET_CURR_TASK_ON_CPU  r1
@@ -216,6 +173,24 @@ ex_saved_reg1:
 	tst	r3, r3
 	bz	do_slow_path_pf         ; if no Page Table, do page fault
 
+#if CONFIG_PGTABLE_LEVELS > 3
+	lsr     r0, r2, PUD_SHIFT	; Bits for indexing into PUD
+	and	r0, r0, (PTRS_PER_PUD - 1)
+	ld.as	r1, [r3, r0]		; PMD entry
+	tst	r1, r1
+	bz	do_slow_path_pf
+	mov	r3, r1
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 2
+	lsr     r0, r2, PMD_SHIFT	; Bits for indexing into PMD
+	and	r0, r0, (PTRS_PER_PMD - 1)
+	ld.as	r1, [r3, r0]		; PMD entry
+	tst	r1, r1
+	bz	do_slow_path_pf
+	mov	r3, r1
+#endif
+
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 	and.f	0, r3, _PAGE_HW_SZ	; Is this Huge PMD (thp)
 	add2.nz	r1, r1, r0
@@ -279,7 +254,7 @@ ex_saved_reg1:
 ; Commit the TLB entry into MMU
 
 .macro COMMIT_ENTRY_TO_MMU
-#if (CONFIG_ARC_MMU_VER < 4)
+#ifdef CONFIG_ARC_MMU_V3
 
 	/* Get free TLB slot: Set = computed from vaddr, way = random */
 	sr  TLBGetIndex, [ARC_REG_TLBCOMMAND]
@@ -375,13 +350,6 @@ ENTRY(EV_TLBMissD)
 
 	CONV_PTE_TO_TLB
 
-#if (CONFIG_ARC_MMU_VER == 1)
-	; MMU with 2 way set assoc J-TLB, needs some help in pathetic case of
-	; memcpy where 3 parties contend for 2 ways, ensuing a livelock.
-	; But only for old MMU or one with Metal Fix
-	TLB_WRITE_HEURISTICS
-#endif
-
 	COMMIT_ENTRY_TO_MMU
 	TLBMISS_RESTORE_REGS
 EV_TLBMissD_fast_ret:	; additional label for VDK OS-kit instrumentation
diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
index 63ea5a606ecd..b821df7b0089 100644
--- a/arch/arc/plat-axs10x/axs10x.c
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -50,7 +50,7 @@ static void __init axs10x_enable_gpio_intc_wire(void)
 	 * Current implementation of "irq-dw-apb-ictl" driver doesn't work well
 	 * with stacked INTCs. In particular problem happens if its master INTC
 	 * not yet instantiated. See discussion here -
-	 * https://lkml.org/lkml/2015/3/4/755
+	 * https://lore.kernel.org/lkml/54F6FE2C.7020309@synopsys.com
 	 *
 	 * So setup the first gpio block as a passive pass thru and hide it from
 	 * DT hardware topology - connect MB intc directly to cpu intc
diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c
index b3ea1fa11f87..c4a875b22352 100644
--- a/arch/arc/plat-hsdk/platform.c
+++ b/arch/arc/plat-hsdk/platform.c
@@ -52,7 +52,7 @@ static void __init hsdk_enable_gpio_intc_wire(void)
 	 * Current implementation of "irq-dw-apb-ictl" driver doesn't work well
 	 * with stacked INTCs. In particular problem happens if its master INTC
 	 * not yet instantiated. See discussion here -
-	 * https://lkml.org/lkml/2015/3/4/755
+	 * https://lore.kernel.org/lkml/54F6FE2C.7020309@synopsys.com
 	 *
 	 * So setup the first gpio block as a passive pass thru and hide it from
 	 * DT hardware topology - connect intc directly to cpu intc
diff --git a/arch/arm/Kbuild b/arch/arm/Kbuild
index 5208f7061524..b506622e7e23 100644
--- a/arch/arm/Kbuild
+++ b/arch/arm/Kbuild
@@ -9,3 +9,6 @@ obj-y				+= kernel/ mm/ common/
 obj-y				+= probes/
 obj-y				+= net/
 obj-y				+= crypto/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5da96f5df48f..0fb4b218f665 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -3,7 +3,9 @@ config ARM
 	bool
 	default y
 	select ARCH_32BIT_OFF_T
+	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND
 	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
 	select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE
 	select ARCH_HAS_ELF_RANDOMIZE
@@ -13,37 +15,41 @@ config ARM
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_SPECIAL if ARM_LPAE
-	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SET_MEMORY
+	select ARCH_STACKWALK
 	select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
 	select ARCH_HAS_STRICT_MODULE_RWX if MMU
-	select ARCH_HAS_SYNC_DMA_FOR_DEVICE if SWIOTLB
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if SWIOTLB
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_TEARDOWN_DMA_OPS if MMU
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
-	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if CPU_V7 || CPU_V7M || CPU_V6K
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_KEEP_MEMBLOCK
+	select ARCH_HAS_UBSAN_SANITIZE_ALL
 	select ARCH_MIGHT_HAVE_PC_PARPORT
-	select ARCH_NO_SG_CHAIN if !ARM_HAS_SG_CHAIN
 	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
 	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
 	select ARCH_SUPPORTS_ATOMIC_RMW
+	select ARCH_SUPPORTS_HUGETLBFS if ARM_LPAE
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
+	select ARCH_USE_MEMTEST
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
+	select ARCH_WANT_GENERAL_HUGETLB
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_WANT_LD_ORPHAN_WARN
 	select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
 	select BUILDTIME_TABLE_SORT if MMU
+	select COMMON_CLK if !(ARCH_RPC || ARCH_FOOTBRIDGE)
 	select CLONE_BACKWARDS
 	select CPU_PM if SUSPEND || CPU_IDLE
 	select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select DMA_DECLARE_COHERENT
+	select DMA_GLOBAL_POOL if !MMU
 	select DMA_OPS
-	select DMA_REMAP if MMU
+	select DMA_NONCOHERENT_MMAP if MMU
 	select EDAC_SUPPORT
 	select EDAC_ATOMIC_SCRUB
 	select GENERIC_ALLOCATOR
@@ -54,6 +60,7 @@ config ARM
 	select GENERIC_CPU_AUTOPROBE
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
@@ -61,25 +68,27 @@ config ARM
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
-	select GENERIC_STRNCPY_FROM_USER
-	select GENERIC_STRNLEN_USER
-	select HANDLE_DOMAIN_IRQ
 	select HARDIRQS_SW_RESEND
+	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT
 	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_KFENCE if MMU && !XIP_KERNEL
 	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
 	select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
+	select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
 	select HAVE_ARCH_PFN_VALID
 	select HAVE_ARCH_SECCOMP
 	select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT
 	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARM_LPAE
 	select HAVE_ARM_SMCCC if CPU_V7
 	select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32
-	select HAVE_CONTEXT_TRACKING
+	select HAVE_CONTEXT_TRACKING_USER
 	select HAVE_C_RECORDMCOUNT
+	select HAVE_BUILDTIME_MCOUNT_SORT
 	select HAVE_DEBUG_KMEMLEAK if !XIP_KERNEL
 	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
@@ -88,11 +97,11 @@ config ARM
 	select HAVE_EXIT_THREAD
 	select HAVE_FAST_GUP if ARM_LPAE
 	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
-	select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG
+	select HAVE_FUNCTION_ERROR_INJECTION
+	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
-	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZ4
@@ -104,6 +113,7 @@ config ARM
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
 	select HAVE_OPTPROBES if !THUMB2_KERNEL
+	select HAVE_PCI if MMU
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
@@ -120,11 +130,17 @@ config ARM
 	select OF_EARLY_FLATTREE if OF
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
+	select PCI_DOMAINS_GENERIC if PCI
 	select PCI_SYSCALL if PCI
 	select PERF_USE_VMALLOC
 	select RTC_LIB
-	select SET_FS
+	select SPARSE_IRQ if !(ARCH_FOOTBRIDGE || ARCH_RPC)
 	select SYS_SUPPORTS_APM_EMULATION
+	select THREAD_INFO_IN_TASK
+	select TIMER_OF if OF
+	select HAVE_ARCH_VMAP_STACK if MMU && ARM_HAS_GROUP_RELOCS
+	select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M
+	select USE_OF if !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	# Above selects are sorted alphabetically; please add new ones
 	# according to that.  Thanks.
 	help
@@ -135,12 +151,19 @@ config ARM
 	  Europe.  There is an ARM Linux project with a web page at
 	  <http://www.arm.linux.org.uk/>.
 
-config ARM_HAS_SG_CHAIN
-	bool
+config ARM_HAS_GROUP_RELOCS
+	def_bool y
+	depends on !LD_IS_LLD || LLD_VERSION >= 140000
+	depends on !COMPILE_TEST
+	help
+	  Whether or not to use R_ARM_ALU_PC_Gn or R_ARM_LDR_PC_Gn group
+	  relocations, which have been around for a long time, but were not
+	  supported in LLD until version 14. The combined range is -/+ 256 MiB,
+	  which is usually sufficient, but not for allyesconfig, so we disable
+	  this feature when doing compile testing.
 
 config ARM_DMA_USE_IOMMU
 	bool
-	select ARM_HAS_SG_CHAIN
 	select NEED_SG_DMA_LENGTH
 
 if ARM_DMA_USE_IOMMU
@@ -188,10 +211,6 @@ config LOCKDEP_SUPPORT
 	bool
 	default y
 
-config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default !CPU_V7M
-
 config ARCH_HAS_ILOG2_U32
 	bool
 
@@ -215,31 +234,22 @@ config GENERIC_CALIBRATE_DELAY
 config ARCH_MAY_HAVE_PC_FDC
 	bool
 
-config ZONE_DMA
-	bool
-
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
 
-config ARCH_HAS_DMA_SET_COHERENT_MASK
-	bool
-
 config GENERIC_ISA_DMA
 	bool
 
 config FIQ
 	bool
 
-config NEED_RET_TO_USER
-	bool
-
 config ARCH_MTD_XIP
 	bool
 
 config ARM_PATCH_PHYS_VIRT
 	bool "Patch physical to virtual translations at runtime" if EMBEDDED
 	default y
-	depends on !XIP_KERNEL && MMU
+	depends on MMU
 	help
 	  Patch phys-to-virt and virt-to-phys translation functions at
 	  boot and module load time according to the position of the
@@ -268,12 +278,13 @@ config NEED_MACH_MEMORY_H
 
 config PHYS_OFFSET
 	hex "Physical address of main memory" if MMU
-	depends on !ARM_PATCH_PHYS_VIRT
+	depends on !ARM_PATCH_PHYS_VIRT || !AUTO_ZRELADDR
 	default DRAM_BASE if !MMU
 	default 0x00000000 if ARCH_FOOTBRIDGE
 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
-	default 0x20000000 if ARCH_S5PV210
-	default 0xc0000000 if ARCH_SA1100
+	default 0xa0000000 if ARCH_PXA
+	default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100
+	default 0
 	help
 	  Please provide the physical address corresponding to the
 	  location of main memory in your system.
@@ -296,6 +307,12 @@ config MMU
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.
 
+config ARM_SINGLE_ARMV7M
+	def_bool !MMU
+	select ARM_NVIC
+	select CPU_V7M
+	select NO_IOPORT_MAP
+
 config ARCH_MMAP_RND_BITS_MIN
 	default 8
 
@@ -304,233 +321,39 @@ config ARCH_MMAP_RND_BITS_MAX
 	default 15 if PAGE_OFFSET=0x80000000
 	default 16
 
-#
-# The "ARM system type" choice list is ordered alphabetically by option
-# text.  Please add new entries in the option alphabetic order.
-#
-choice
-	prompt "ARM system type"
-	default ARM_SINGLE_ARMV7M if !MMU
-	default ARCH_MULTIPLATFORM if MMU
-
 config ARCH_MULTIPLATFORM
-	bool "Allow multiple platforms to be selected"
-	depends on MMU
-	select ARCH_FLATMEM_ENABLE
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_SELECT_MEMORY_MODEL
-	select ARM_HAS_SG_CHAIN
-	select ARM_PATCH_PHYS_VIRT
-	select AUTO_ZRELADDR
-	select TIMER_OF
-	select COMMON_CLK
-	select GENERIC_IRQ_MULTI_HANDLER
-	select HAVE_PCI
-	select PCI_DOMAINS_GENERIC if PCI
-	select SPARSE_IRQ
-	select USE_OF
-
-config ARM_SINGLE_ARMV7M
-	bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
-	depends on !MMU
-	select ARM_NVIC
-	select AUTO_ZRELADDR
-	select TIMER_OF
-	select COMMON_CLK
-	select CPU_V7M
-	select NO_IOPORT_MAP
-	select SPARSE_IRQ
-	select USE_OF
-
-config ARCH_EP93XX
-	bool "EP93xx-based"
-	select ARCH_SPARSEMEM_ENABLE
-	select ARM_AMBA
-	imply ARM_PATCH_PHYS_VIRT
-	select ARM_VIC
-	select GENERIC_IRQ_MULTI_HANDLER
-	select AUTO_ZRELADDR
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select CPU_ARM920T
-	select GPIOLIB
-	select HAVE_LEGACY_CLK
-	help
-	  This enables support for the Cirrus EP93xx series of CPUs.
-
-config ARCH_FOOTBRIDGE
-	bool "FootBridge"
-	select CPU_SA110
-	select FOOTBRIDGE
-	select HAVE_IDE
-	select NEED_MACH_IO_H if !MMU
-	select NEED_MACH_MEMORY_H
+	bool "Require kernel to be portable to multiple machines" if EXPERT
+	depends on MMU && !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
+	default y
 	help
-	  Support for systems based on the DC21285 companion chip
-	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
+	  In general, all Arm machines can be supported in a single
+	  kernel image, covering either Armv4/v5 or Armv6/v7.
 
-config ARCH_IOP32X
-	bool "IOP32x-based"
-	depends on MMU
-	select CPU_XSCALE
-	select GPIO_IOP
-	select GPIOLIB
-	select NEED_RET_TO_USER
-	select FORCE_PCI
-	select PLAT_IOP
-	help
-	  Support for Intel's 80219 and IOP32X (XScale) family of
-	  processors.
-
-config ARCH_IXP4XX
-	bool "IXP4xx-based"
-	depends on MMU
-	select ARCH_HAS_DMA_SET_COHERENT_MASK
-	select ARCH_SUPPORTS_BIG_ENDIAN
-	select CPU_XSCALE
-	select DMABOUNCE if PCI
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIO_IXP4XX
-	select GPIOLIB
-	select HAVE_PCI
-	select IXP4XX_IRQ
-	select IXP4XX_TIMER
-	select NEED_MACH_IO_H
-	select USB_EHCI_BIG_ENDIAN_DESC
-	select USB_EHCI_BIG_ENDIAN_MMIO
-	help
-	  Support for Intel's IXP4XX (XScale) family of processors.
-
-config ARCH_DOVE
-	bool "Marvell Dove"
-	select CPU_PJ4
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIOLIB
-	select HAVE_PCI
-	select MVEBU_MBUS
-	select PINCTRL
-	select PINCTRL_DOVE
-	select PLAT_ORION_LEGACY
-	select SPARSE_IRQ
-	select PM_GENERIC_DOMAINS if PM
-	help
-	  Support for the Marvell Dove SoC 88AP510
+	  However, some configuration options require hardcoding machine
+	  specific physical addresses or enable errata workarounds that may
+	  break other machines.
 
-config ARCH_PXA
-	bool "PXA2xx/PXA3xx-based"
-	depends on MMU
-	select ARCH_MTD_XIP
-	select ARM_CPU_SUSPEND if PM
-	select AUTO_ZRELADDR
-	select COMMON_CLK
-	select CLKSRC_PXA
-	select CLKSRC_MMIO
-	select TIMER_OF
-	select CPU_XSCALE if !CPU_XSC3
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIO_PXA
-	select GPIOLIB
-	select HAVE_IDE
-	select IRQ_DOMAIN
-	select PLAT_PXA
-	select SPARSE_IRQ
-	help
-	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
+	  Selecting N here allows using those options, including
+	  DEBUG_UNCOMPRESS, XIP_KERNEL and ZBOOT_ROM. If unsure, say Y.
 
-config ARCH_RPC
-	bool "RiscPC"
+menu "Platform selection"
 	depends on MMU
-	select ARCH_ACORN
-	select ARCH_MAY_HAVE_PC_FDC
-	select ARCH_SPARSEMEM_ENABLE
-	select ARM_HAS_SG_CHAIN
-	select CPU_SA110
-	select FIQ
-	select HAVE_IDE
-	select HAVE_PATA_PLATFORM
-	select ISA_DMA_API
-	select LEGACY_TIMER_TICK
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	select NO_IOPORT_MAP
-	help
-	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
-	  CD-ROM interface, serial and parallel port, and the floppy drive.
-
-config ARCH_SA1100
-	bool "SA1100-based"
-	select ARCH_MTD_XIP
-	select ARCH_SPARSEMEM_ENABLE
-	select CLKSRC_MMIO
-	select CLKSRC_PXA
-	select TIMER_OF if OF
-	select COMMON_CLK
-	select CPU_FREQ
-	select CPU_SA1100
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIOLIB
-	select HAVE_IDE
-	select IRQ_DOMAIN
-	select ISA
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	help
-	  Support for StrongARM 11x0 based boards.
-
-config ARCH_S3C24XX
-	bool "Samsung S3C24XX SoCs"
-	select ATAGS
-	select CLKSRC_SAMSUNG_PWM
-	select GPIO_SAMSUNG
-	select GPIOLIB
-	select GENERIC_IRQ_MULTI_HANDLER
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC if RTC_CLASS
-	select NEED_MACH_IO_H
-	select S3C2410_WATCHDOG
-	select SAMSUNG_ATAGS
-	select USE_OF
-	select WATCHDOG
-	help
-	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
-	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
-	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
-	  Samsung SMDK2410 development board (and derivatives).
-
-config ARCH_OMAP1
-	bool "TI OMAP1"
-	depends on MMU
-	select ARCH_OMAP
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIOLIB
-	select HAVE_IDE
-	select HAVE_LEGACY_CLK
-	select IRQ_DOMAIN
-	select NEED_MACH_IO_H if PCCARD
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	help
-	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
-
-endchoice
-
-menu "Multiple platform selection"
-	depends on ARCH_MULTIPLATFORM
 
 comment "CPU Core family selection"
 
 config ARCH_MULTI_V4
-	bool "ARMv4 based platforms (FA526)"
+	bool "ARMv4 based platforms (FA526, StrongARM)"
 	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
 	select ARCH_MULTI_V4_V5
-	select CPU_FA526
+	select CPU_FA526 if !(CPU_SA110 || CPU_SA1100)
 
 config ARCH_MULTI_V4T
 	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
 	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
 	select ARCH_MULTI_V4_V5
 	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
 		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
@@ -579,7 +402,17 @@ config ARCH_VIRT
 	select ARM_GIC_V3_ITS if PCI
 	select ARM_PSCI
 	select HAVE_ARM_ARCH_TIMER
-	select ARCH_SUPPORTS_BIG_ENDIAN
+
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V3
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  Support for Airoha EN7523 SoCs
 
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
@@ -606,8 +439,6 @@ source "arch/arm/mach-berlin/Kconfig"
 
 source "arch/arm/mach-clps711x/Kconfig"
 
-source "arch/arm/mach-cns3xxx/Kconfig"
-
 source "arch/arm/mach-davinci/Kconfig"
 
 source "arch/arm/mach-digicolor/Kconfig"
@@ -626,11 +457,9 @@ source "arch/arm/mach-highbank/Kconfig"
 
 source "arch/arm/mach-hisi/Kconfig"
 
-source "arch/arm/mach-imx/Kconfig"
-
-source "arch/arm/mach-integrator/Kconfig"
+source "arch/arm/mach-hpe/Kconfig"
 
-source "arch/arm/mach-iop32x/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
 
 source "arch/arm/mach-ixp4xx/Kconfig"
 
@@ -662,18 +491,13 @@ source "arch/arm/mach-npcm/Kconfig"
 
 source "arch/arm/mach-nspire/Kconfig"
 
-source "arch/arm/plat-omap/Kconfig"
-
 source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
-source "arch/arm/mach-oxnas/Kconfig"
-
 source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
 
 source "arch/arm/mach-qcom/Kconfig"
 
@@ -681,7 +505,7 @@ source "arch/arm/mach-rda/Kconfig"
 
 source "arch/arm/mach-realtek/Kconfig"
 
-source "arch/arm/mach-realview/Kconfig"
+source "arch/arm/mach-rpc/Kconfig"
 
 source "arch/arm/mach-rockchip/Kconfig"
 
@@ -701,6 +525,8 @@ source "arch/arm/mach-sti/Kconfig"
 
 source "arch/arm/mach-stm32/Kconfig"
 
+source "arch/arm/mach-sunplus/Kconfig"
+
 source "arch/arm/mach-sunxi/Kconfig"
 
 source "arch/arm/mach-tegra/Kconfig"
@@ -711,8 +537,6 @@ source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
 
-source "arch/arm/mach-vexpress/Kconfig"
-
 source "arch/arm/mach-vt8500/Kconfig"
 
 source "arch/arm/mach-zynq/Kconfig"
@@ -745,13 +569,9 @@ config ARCH_MPS2
 config ARCH_ACORN
 	bool
 
-config PLAT_IOP
-	bool
-
 config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
-	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
 
@@ -759,9 +579,6 @@ config PLAT_ORION_LEGACY
 	bool
 	select PLAT_ORION
 
-config PLAT_PXA
-	bool
-
 config PLAT_VERSATILE
 	bool
 
@@ -839,7 +656,9 @@ config ARM_ERRATA_458693
 	  hazard might then cause a processor deadlock. The workaround enables
 	  the L1 caching of the NEON accesses and disables the PLD instruction
 	  in the ACTLR register. Note that setting specific bits in the ACTLR
-	  register may not be available in non-secure mode.
+	  register may not be available in non-secure mode and thus is not
+	  available on a multiplatform kernel. This should be applied by the
+	  bootloader instead.
 
 config ARM_ERRATA_460075
 	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
@@ -852,7 +671,9 @@ config ARM_ERRATA_460075
 	  and overwritten with stale memory contents from external memory. The
 	  workaround disables the write-allocate mode for the L2 cache via the
 	  ACTLR register. Note that setting specific bits in the ACTLR register
-	  may not be available in non-secure mode.
+	  may not be available in non-secure mode and thus is not available on
+	  a multiplatform kernel. This should be applied by the bootloader
+	  instead.
 
 config ARM_ERRATA_742230
 	bool "ARM errata: DMB operation may be faulty"
@@ -865,7 +686,10 @@ config ARM_ERRATA_742230
 	  ordering of the two writes. This workaround sets a specific bit in
 	  the diagnostic register of the Cortex-A9 which causes the DMB
 	  instruction to behave as a DSB, ensuring the correct behaviour of
-	  the two writes.
+	  the two writes. Note that setting specific bits in the diagnostics
+	  register may not be available in non-secure mode and thus is not
+	  available on a multiplatform kernel. This should be applied by the
+	  bootloader instead.
 
 config ARM_ERRATA_742231
 	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
@@ -880,7 +704,10 @@ config ARM_ERRATA_742231
 	  replaced from one of the CPUs at the same time as another CPU is
 	  accessing it. This workaround sets specific bits in the diagnostic
 	  register of the Cortex-A9 which reduces the linefill issuing
-	  capabilities of the processor.
+	  capabilities of the processor. Note that setting specific bits in the
+	  diagnostics register may not be available in non-secure mode and thus
+	  is not available on a multiplatform kernel. This should be applied by
+	  the bootloader instead.
 
 config ARM_ERRATA_643719
 	bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
@@ -917,7 +744,9 @@ config ARM_ERRATA_743622
 	  register of the Cortex-A9 which disables the Store Buffer
 	  optimisation, preventing the defect from occurring. This has no
 	  visible impact on the overall performance or power consumption of the
-	  processor.
+	  processor. Note that setting specific bits in the diagnostics register
+	  may not be available in non-secure mode and thus is not available on a
+	  multiplatform kernel. This should be applied by the bootloader instead.
 
 config ARM_ERRATA_751472
 	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
@@ -929,6 +758,10 @@ config ARM_ERRATA_751472
 	  completion of a following broadcasted operation if the second
 	  operation is received by a CPU before the ICIALLUIS has completed,
 	  potentially leading to corrupted entries in the cache or TLB.
+	  Note that setting specific bits in the diagnostics register may
+	  not be available in non-secure mode and thus is not available on
+	  a multiplatform kernel. This should be applied by the bootloader
+	  instead.
 
 config ARM_ERRATA_754322
 	bool "ARM errata: possible faulty MMU translations following an ASID switch"
@@ -978,6 +811,17 @@ config ARM_ERRATA_764369
 	  relevant cache maintenance functions and sets a specific bit
 	  in the diagnostic control register of the SCU.
 
+config ARM_ERRATA_764319
+	bool "ARM errata: Read to DBGPRSR and DBGOSLSR may generate Undefined instruction"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 764319 Cortex A-9 erratum.
+	  CP14 read accesses to the DBGPRSR and DBGOSLSR registers generate an
+	  unexpected Undefined Instruction exception when the DBGSWENABLE
+	  external pin is set to 0, even when the CP14 accesses are performed
+	  from a privileged mode. This work around catches the exception in a
+	  way the kernel does not stop execution.
+
 config ARM_ERRATA_775420
        bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
        depends on CPU_V7
@@ -1094,21 +938,10 @@ config ISA
 	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
 	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
 
-# Select ISA DMA controller support
-config ISA_DMA
-	bool
-	select ISA_DMA_API
-
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool
 
-config PCI_NANOENGINE
-	bool "BSE nanoEngine PCI support"
-	depends on SA1100_NANOENGINE
-	help
-	  Enable PCI on the BSE nanoEngine board.
-
 config ARM_ERRATA_814220
 	bool "ARM errata: Cache maintenance by set/way operations can execute out of order"
 	depends on CPU_V7
@@ -1151,7 +984,7 @@ config SMP
 	  uniprocessor machines. On a uniprocessor machine, the kernel
 	  will run faster if you say N here.
 
-	  See also <file:Documentation/x86/i386/IO-APIC.rst>,
+	  See also <file:Documentation/arch/x86/i386/IO-APIC.rst>,
 	  <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at
 	  <http://tldp.org/HOWTO/SMP-HOWTO.html>.
 
@@ -1159,7 +992,7 @@ config SMP
 
 config SMP_ON_UP
 	bool "Allow booting SMP kernel on uniprocessor systems"
-	depends on SMP && !XIP_KERNEL && MMU
+	depends on SMP && MMU
 	default y
 	help
 	  SMP kernels contain instructions which fail on non-SMP processors.
@@ -1169,6 +1002,16 @@ config SMP_ON_UP
 
 	  If you don't know what to do here, say Y.
 
+
+config CURRENT_POINTER_IN_TPIDRURO
+	def_bool y
+	depends on CPU_32v6K && !CPU_V6
+
+config IRQSTACKS
+	def_bool y
+	select HAVE_IRQ_EXIT_ON_IRQ_STACK
+	select HAVE_SOFTIRQ_ON_OWN_STACK
+
 config ARM_CPU_TOPOLOGY
 	bool "Support cpu topology definition"
 	depends on SMP && CPU_V7
@@ -1293,9 +1136,15 @@ config KASAN_SHADOW_OFFSET
 
 config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
-	range 2 32
+	range 2 16 if DEBUG_KMAP_LOCAL
+	range 2 32 if !DEBUG_KMAP_LOCAL
 	depends on SMP
 	default "4"
+	help
+	  The maximum number of CPUs that the kernel can support.
+	  Up to 32 CPUs can be supported, or up to 16 if kmap_local()
+	  debugging is enabled, which uses half of the per-CPU fixmap
+	  slots as guard regions.
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
@@ -1316,27 +1165,6 @@ config ARM_PSCI
 	  0022A ("Power State Coordination Interface System Software on
 	  ARM processors").
 
-# The GPIO number here must be sorted by descending number. In case of
-# a multiplatform kernel, we just want the highest value required by the
-# selected platforms.
-config ARCH_NR_GPIO
-	int
-	default 2048 if ARCH_SOCFPGA
-	default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \
-		ARCH_ZYNQ || ARCH_ASPEED
-	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
-		SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
-	default 416 if ARCH_SUNXI
-	default 392 if ARCH_U8500
-	default 352 if ARCH_VT8500
-	default 288 if ARCH_ROCKCHIP
-	default 264 if MACH_H4700
-	default 0
-	help
-	  Maximum number of GPIOs in the system.
-
-	  If unsure, leave the default value.
-
 config HZ_FIXED
 	int
 	default 128 if SOC_AT91RM9200
@@ -1392,7 +1220,7 @@ config THUMB2_KERNEL
 
 config ARM_PATCH_IDIV
 	bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
-	depends on CPU_32v7 && !XIP_KERNEL
+	depends on CPU_32v7
 	default y
 	help
 	  The ARM compiler inserts calls to __aeabi_idiv() and
@@ -1447,19 +1275,20 @@ config OABI_COMPAT
 	  at all). If in doubt say N.
 
 config ARCH_SELECT_MEMORY_MODEL
-	bool
+	def_bool y
 
 config ARCH_FLATMEM_ENABLE
-	bool
+	def_bool !(ARCH_RPC || ARCH_SA1100)
 
 config ARCH_SPARSEMEM_ENABLE
-	bool
+	def_bool !ARCH_FOOTBRIDGE
 	select SPARSEMEM_STATIC if SPARSEMEM
 
 config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
 	select KMAP_LOCAL
+	select KMAP_LOCAL_NON_LINEAR_PTE_ARRAY
 	help
 	  The address space of ARM processors is only 4 Gigabytes large
 	  and it has to accommodate user address space, kernel address
@@ -1504,20 +1333,10 @@ config HW_PERF_EVENTS
 	def_bool y
 	depends on ARM_PMU
 
-config SYS_SUPPORTS_HUGETLBFS
-       def_bool y
-       depends on ARM_LPAE
-
-config HAVE_ARCH_TRANSPARENT_HUGEPAGE
-       def_bool y
-       depends on ARM_LPAE
-
-config ARCH_WANT_GENERAL_HUGETLB
-	def_bool y
-
 config ARM_MODULE_PLTS
 	bool "Use PLTs to allow module memory to spill over into vmalloc area"
 	depends on MODULES
+	select KASAN_VMALLOC if KASAN
 	default y
 	help
 	  Allocate PLTs when loading modules so that jumps and calls whose
@@ -1532,21 +1351,20 @@ config ARM_MODULE_PLTS
 	  Disabling this is usually safe for small single-platform
 	  configurations. If unsure, say y.
 
-config FORCE_MAX_ZONEORDER
-	int "Maximum zone order"
-	default "12" if SOC_AM33XX
-	default "9" if SA1111
-	default "11"
+config ARCH_FORCE_MAX_ORDER
+	int "Order of maximal physically contiguous allocations"
+	default "11" if SOC_AM33XX
+	default "8" if SA1111
+	default "10"
 	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
 
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
+	  Don't change if unsure.
 
 config ALIGNMENT_TRAP
 	def_bool CPU_CP15_MMU
@@ -1612,10 +1430,14 @@ config XEN
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
+config CC_HAVE_STACKPROTECTOR_TLS
+	def_bool $(cc-option,-mtp=cp15 -mstack-protector-guard=tls -mstack-protector-guard-offset=0)
+
 config STACKPROTECTOR_PER_TASK
 	bool "Use a unique stack canary value for each task"
-	depends on GCC_PLUGINS && STACKPROTECTOR && SMP && !XIP_DEFLATED_DATA
-	select GCC_PLUGIN_ARM_SSP_PER_TASK
+	depends on STACKPROTECTOR && CURRENT_POINTER_IN_TPIDRURO && !XIP_DEFLATED_DATA
+	depends on GCC_PLUGINS || CC_HAVE_STACKPROTECTOR_TLS
+	select GCC_PLUGIN_ARM_SSP_PER_TASK if !CC_HAVE_STACKPROTECTOR_TLS
 	default y
 	help
 	  Due to the fact that GCC uses an ordinary symbol reference from
@@ -1639,14 +1461,13 @@ config USE_OF
 	  Include support for flattened device tree machine descriptions.
 
 config ATAGS
-	bool "Support for the traditional ATAGS boot data passing" if USE_OF
+	bool "Support for the traditional ATAGS boot data passing"
 	default y
 	help
 	  This is the traditional way of passing data to the kernel at boot
 	  time. If you are solely relying on the flattened device tree (or
 	  the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
-	  to remove ATAGS support from your kernel binary.  If unsure,
-	  leave this to y.
+	  to remove ATAGS support from your kernel binary.
 
 config DEPRECATED_PARAM_STRUCT
 	bool "Provide old way to pass kernel parameters"
@@ -1753,7 +1574,6 @@ config CMDLINE
 choice
 	prompt "Kernel command line type" if CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
-	depends on ATAGS
 
 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"
@@ -1780,6 +1600,7 @@ endchoice
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
 	depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
+	depends on !ARM_PATCH_IDIV && !ARM_PATCH_PHYS_VIRT && !SMP_ON_UP
 	help
 	  Execute-In-Place allows the kernel to run from non-volatile storage
 	  directly addressable by the CPU, such as NOR flash. This saves RAM
@@ -1854,7 +1675,8 @@ config CRASH_DUMP
 	  For more details see Documentation/admin-guide/kdump/kdump.rst
 
 config AUTO_ZRELADDR
-	bool "Auto calculation of the decompressed kernel image address"
+	bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM
+	default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	help
 	  ZRELADDR is the physical address where the decompressed kernel
 	  image will be placed. If AUTO_ZRELADDR is selected, the address
@@ -2003,10 +1825,4 @@ config ARCH_HIBERNATION_POSSIBLE
 
 endmenu
 
-source "drivers/firmware/Kconfig"
-
-if CRYPTO
-source "arch/arm/crypto/Kconfig"
-endif
-
 source "arch/arm/Kconfig.assembler"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9e0b5e7f12af..b407b7b9b715 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -65,7 +65,7 @@ config UNWINDER_FRAME_POINTER
 
 config UNWINDER_ARM
 	bool "ARM EABI stack unwinder"
-	depends on AEABI && !FUNCTION_GRAPH_TRACER
+	depends on AEABI
 	select ARM_UNWIND
 	help
 	  This option enables stack unwinding support in the kernel
@@ -79,6 +79,17 @@ endchoice
 config ARM_UNWIND
 	bool
 
+config BACKTRACE_VERBOSE
+	bool "Verbose backtrace"
+	depends on EXPERT
+	help
+	  When the kernel produces a warning or oops, the kernel prints a
+	  trace of the call chain. This option controls whether we include
+	  the numeric addresses or only include the symbolic information.
+
+	  In most cases, say N here, unless you are intending to debug the
+	  kernel and have access to the kernel binary image.
+
 config FRAME_POINTER
 	bool
 
@@ -191,6 +202,34 @@ choice
 		  their output to the USART1 port on SAMV7 based
 		  machines.
 
+	config DEBUG_AT91_SAMA7G5_FLEXCOM3
+		bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3"
+		select DEBUG_AT91_UART
+		depends on SOC_SAMA7G5
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the FLEXCOM3 port of SAMA7G5.
+
+	config DEBUG_AT91_LAN966_FLEXCOM
+		bool "Kernel low-level debugging on LAN966 FLEXCOM USART"
+		select DEBUG_AT91_UART
+		depends on SOC_LAN966
+		help
+		Say Y here if you want kernel low-level debugging support
+		on the FLEXCOM port of LAN966.
+
+		DEBUG_UART_PHYS | DEBUG_UART_VIRT
+
+		0xe0040200      | 0xfd040200     | FLEXCOM0
+		0xe0044200      | 0xfd044200     | FLEXCOM1
+		0xe0060200      | 0xfd060200     | FLEXCOM2
+		0xe0064200      | 0xfd064200     | FLEXCOM3
+		0xe0070200      | 0xfd070200     | FLEXCOM4
+
+		By default, enabling FLEXCOM3 port. Based on requirement, use
+		DEBUG_UART_PHYS and DEBUG_UART_VIRT configurations from above
+		table.
+
 	config DEBUG_BCM2835
 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
 		depends on ARCH_BCM2835 && ARCH_MULTI_V6
@@ -232,7 +271,7 @@ choice
 
 	config DEBUG_BCM63XX_UART
 		bool "Kernel low-level debugging on BCM63XX UART"
-		depends on ARCH_BCM_63XX
+		depends on ARCH_BCMBCA
 
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
@@ -268,14 +307,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
-	config DEBUG_CNS3XXX
-		bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
-		depends on ARCH_CNS3XXX
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-                  their output to the CNS3xxx UART0.
-
 	config DEBUG_DAVINCI_DA8XX_UART1
 		bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
 		depends on ARCH_DAVINCI_DA8XX
@@ -292,14 +323,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART2 serial port on DaVinci DA8XX devices.
 
-	config DEBUG_DAVINCI_DMx_UART0
-		bool "Kernel low-level debugging on DaVinci DMx using UART0"
-		depends on ARCH_DAVINCI_DMx
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART0 serial port on DaVinci DMx devices.
-
 	config DEBUG_DC21285_PORT
 		bool "Kernel low-level debugging messages via footbridge serial port"
 		depends on FOOTBRIDGE
@@ -400,12 +423,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX25.
 
-	config DEBUG_IMX21_IMX27_UART
-		bool "i.MX21 and i.MX27 Debug UART"
-		depends on SOC_IMX21 || SOC_IMX27
+	config DEBUG_IMX27_UART
+		bool "i.MX27 Debug UART"
+		depends on SOC_IMX27
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX21 or i.MX27.
+		  on i.MX27.
 
 	config DEBUG_IMX28_UART
 		bool "i.MX28 Debug UART"
@@ -607,6 +630,14 @@ choice
 		  when u-boot hands over to the kernel, the system
 		  silently crashes, with no serial output at all.
 
+	config DEBUG_MSTARV7_PMUART
+		bool "Kernel low-level debugging messages via MSTARV7 PM UART"
+		depends on ARCH_MSTARV7
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  for MSTAR ARMv7-based platforms on PM UART.
+
 	config DEBUG_MT6589_UART0
 		bool "Mediatek mt6589 UART0"
 		depends on ARCH_MEDIATEK
@@ -721,30 +752,6 @@ choice
 		depends on ARCH_OMAP2PLUS
 		select DEBUG_UART_8250
 
-	config DEBUG_OMAP7XXUART1
-		bool "Kernel low-level debugging via OMAP730 UART1"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART1.
-
-	config DEBUG_OMAP7XXUART2
-		bool "Kernel low-level debugging via OMAP730 UART2"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART2.
-
-	config DEBUG_OMAP7XXUART3
-		bool "Kernel low-level debugging via OMAP730 UART3"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART3.
-
 	config DEBUG_TI81XXUART1
 		bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
 		depends on ARCH_OMAP2PLUS
@@ -999,7 +1006,6 @@ choice
 	config DEBUG_S3C_UART0
 		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 0 for low-level debug"
@@ -1011,7 +1017,6 @@ choice
 	config DEBUG_S3C_UART1
 		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 1 for low-level debug"
@@ -1023,7 +1028,6 @@ choice
 	config DEBUG_S3C_UART2
 		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 2 for low-level debug"
@@ -1043,33 +1047,6 @@ choice
 		  their output to UART 3. The port must have been initialised
 		  by the boot-loader before use.
 
-	config DEBUG_S3C2410_UART0
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 0. The port must have been initialised
-		  by the boot-loader before use.
-
-	config DEBUG_S3C2410_UART1
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 1. The port must have been initialised
-		  by the boot-loader before use.
-
-	config DEBUG_S3C2410_UART2
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 2. The port must have been initialised
-		  by the boot-loader before use.
-
 	config DEBUG_SA1100
 		depends on ARCH_SA1100
 		bool "Use SA1100 UARTs for low-level debug"
@@ -1087,7 +1064,7 @@ choice
 		  on SD5203 UART.
 
 	config DEBUG_SOCFPGA_UART0
-		depends on ARCH_SOCFPGA
+		depends on ARCH_INTEL_SOCFPGA
 		bool "Use SOCFPGA UART0 for low-level debug"
 		select DEBUG_UART_8250
 		help
@@ -1095,7 +1072,7 @@ choice
 		  on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
 
 	config DEBUG_SOCFPGA_ARRIA10_UART1
-		depends on ARCH_SOCFPGA
+		depends on ARCH_INTEL_SOCFPGA
 		bool "Use SOCFPGA Arria10 UART1 for low-level debug"
 		select DEBUG_UART_8250
 		help
@@ -1103,7 +1080,7 @@ choice
 		  on SOCFPGA(Arria 10) based platforms.
 
 	config DEBUG_SOCFPGA_CYCLONE5_UART1
-		depends on ARCH_SOCFPGA
+		depends on ARCH_INTEL_SOCFPGA
 		bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug"
 		select DEBUG_UART_8250
 		help
@@ -1229,8 +1206,8 @@ choice
 		depends on MACH_STM32MP157
 		select DEBUG_STM32_UART
 		help
-		  Say Y here if you want kernel low-level debugging support
-		  on STM32MP1 based platforms, wich default UART is wired on
+		  Say Y here if you want kernel low-level debugging support on
+		  STM32MP1-based platforms, where the default UART is wired to
 		  UART4, but another UART instance can be selected by modifying
 		  CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT.
 
@@ -1432,13 +1409,6 @@ config DEBUG_AT91_UART
 config DEBUG_EXYNOS_UART
 	bool
 
-config DEBUG_S3C2410_UART
-	bool
-	select DEBUG_S3C24XX_UART
-
-config DEBUG_S3C24XX_UART
-	bool
-
 config DEBUG_S3C64XX_UART
 	bool
 
@@ -1446,8 +1416,7 @@ config DEBUG_S5PV210_UART
 	bool
 
 config DEBUG_S3C_UART
-	depends on DEBUG_S3C2410_UART || DEBUG_S3C24XX_UART || \
-		   DEBUG_S3C64XX_UART ||  DEBUG_S5PV210_UART || \
+	depends on DEBUG_S3C64XX_UART ||  DEBUG_S5PV210_UART || \
 		   DEBUG_EXYNOS_UART
 	int
 	default "0" if DEBUG_S3C_UART0
@@ -1463,7 +1432,7 @@ config DEBUG_IMX_UART_PORT
 	int "i.MX Debug UART Port Selection"
 	depends on DEBUG_IMX1_UART || \
 		   DEBUG_IMX25_UART || \
-		   DEBUG_IMX21_IMX27_UART || \
+		   DEBUG_IMX27_UART || \
 		   DEBUG_IMX31_UART || \
 		   DEBUG_IMX35_UART || \
 		   DEBUG_IMX50_UART || \
@@ -1522,12 +1491,12 @@ config DEBUG_LL_INCLUDE
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
-				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX27_UART || \
 				 DEBUG_IMX31_UART || \
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX50_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX53_UART ||\
+				 DEBUG_IMX53_UART || \
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART || \
@@ -1548,7 +1517,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
-	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
+	default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART
 	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
 	default "debug/sti.S" if DEBUG_STIH41X_ASC2
 	default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
@@ -1571,11 +1540,10 @@ config DEBUG_UART_PL01X
 
 # Compatibility options for 8250
 config DEBUG_UART_8250
-	def_bool ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
+	def_bool ARCH_IXP4XX || ARCH_RPC
 
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
-	default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0x01c28000 if DEBUG_SUNXI_UART0
 	default 0x01c28400 if DEBUG_SUNXI_UART1
 	default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
@@ -1605,6 +1573,7 @@ config DEBUG_UART_PHYS
 	default 0x18000400 if DEBUG_BCM_HR2
 	default 0x18023000 if DEBUG_BCM_IPROC_UART3
 	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
+	default 0x1f221000 if DEBUG_MSTARV7_PMUART
 	default 0x20001000 if DEBUG_HIP01_UART
 	default 0x20060000 if DEBUG_RK29_UART0
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
@@ -1631,13 +1600,6 @@ config DEBUG_UART_PHYS
 	default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0x49020000 if DEBUG_OMAP3UART3
 	default 0x49042000 if DEBUG_OMAP3UART4
-	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-				DEBUG_S3C2410_UART0)
-	default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
-				DEBUG_S3C2410_UART1)
-	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
-				DEBUG_S3C2410_UART2)
-	default 0x78000000 if DEBUG_CNS3XXX
 	default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
 	default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
 	default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
@@ -1657,6 +1619,8 @@ config DEBUG_UART_PHYS
 	default 0xd4017000 if DEBUG_MMP_UART2
 	default 0xd4018000 if DEBUG_MMP_UART3
 	default 0xe0000000 if DEBUG_SPEAR13XX
+	default 0xe0064200 if DEBUG_AT91_LAN966_FLEXCOM
+	default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
 	default 0xe4007000 if DEBUG_HIP04_UART
 	default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
 	default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
@@ -1679,7 +1643,6 @@ config DEBUG_UART_PHYS
 	default 0xfcb00000 if DEBUG_HI3620_UART
 	default 0xfd883000 if DEBUG_ALPINE_UART0
 	default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1
-	default 0xfe800000 if ARCH_IOP32X
 	default 0xfed32000 if DEBUG_STIH41X_ASC2
 	default 0xff690000 if DEBUG_RK32_UART2
 	default 0xffc02000 if DEBUG_SOCFPGA_UART0
@@ -1688,9 +1651,9 @@ config DEBUG_UART_PHYS
 	default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
 	default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
-	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
+	default 0xfffb0000 if DEBUG_OMAP1UART1
+	default 0xfffb0800 if DEBUG_OMAP1UART2
+	default 0xfffb9800 if DEBUG_OMAP1UART3
 	default 0xfffe8600 if DEBUG_BCM63XX_UART
 	default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
 	default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
@@ -1704,7 +1667,7 @@ config DEBUG_UART_PHYS
 		DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \
 		DEBUG_RCAR_GEN2_SCIFA2 || \
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
-		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
+		DEBUG_RMOBILE_SCIFA4 || \
 		DEBUG_S3C64XX_UART || \
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_DIGICOLOR_UA0 || \
@@ -1718,10 +1681,12 @@ config DEBUG_UART_VIRT
 	default 0xc8821000 if DEBUG_RV1108_UART1
 	default 0xc8912000 if DEBUG_RV1108_UART0
 	default 0xe0010fe0 if ARCH_RPC
+	default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
 	default 0xf0010000 if DEBUG_ASM9260_UART
 	default 0xf0100000 if DEBUG_DIGICOLOR_UA0
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
 	default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
+	default 0xf0221000 if DEBUG_MSTARV7_PMUART
 	default 0xf1000300 if DEBUG_BCM_5301X
 	default 0xf1000400 if DEBUG_BCM_HR2
 	default 0xf1002000 if DEBUG_MT8127_UART0
@@ -1739,15 +1704,9 @@ config DEBUG_UART_VIRT
 	default 0xf6200000 if DEBUG_PXA_UART1
 	default 0xf7000000 if DEBUG_SUN9I_UART0
 	default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
-	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-				DEBUG_S3C2410_UART0)
 	default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
 	default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
 	default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
-	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
-				DEBUG_S3C2410_UART1)
-	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
-				DEBUG_S3C2410_UART2)
 	default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8007000 if DEBUG_HIP04_UART
@@ -1766,7 +1725,6 @@ config DEBUG_UART_VIRT
 				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
 	default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
-	default 0xfb002000 if DEBUG_CNS3XXX
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfb020000 if DEBUG_OMAP3UART3
@@ -1774,6 +1732,7 @@ config DEBUG_UART_VIRT
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfcfe8600 if DEBUG_BCM63XX_UART
 	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
+	default 0xfd064200 if DEBUG_AT91_LAN966_FLEXCOM
 	default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1
 	default 0xfd883000 if DEBUG_ALPINE_UART0
 	default 0xfdd32000 if DEBUG_STIH41X_ASC2
@@ -1782,7 +1741,6 @@ config DEBUG_UART_VIRT
 	default 0xfe018000 if DEBUG_MMP_UART3
 	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
 	default 0xfe300000 if DEBUG_BCM_KONA_UART
-	default 0xfe800000 if ARCH_IOP32X
 	default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
 	default 0xfeb24000 if DEBUG_RK3X_UART0
 	default 0xfeb26000 if DEBUG_RK3X_UART1
@@ -1793,7 +1751,6 @@ config DEBUG_UART_VIRT
 	default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
 	default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
-	default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0xfec90000 if DEBUG_RK32_UART2
 	default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
 	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART
@@ -1803,17 +1760,17 @@ config DEBUG_UART_VIRT
 	default 0xfedc0000 if DEBUG_EP93XX
 	default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1
 	default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
-	default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
-	default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+	default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
+	default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xfef36000 if DEBUG_HIGHBANK_UART
-	default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
+	default 0xff0b0000 if DEBUG_OMAP1UART1
+	default 0xff0b0800 if DEBUG_OMAP1UART2
+	default 0xff0b9800 if DEBUG_OMAP1UART3
 	default 0xffd01000 if DEBUG_HIP01_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
+		DEBUG_QCOM_UARTDM || \
 		DEBUG_S3C64XX_UART || \
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_DIGICOLOR_UA0 || \
@@ -1824,9 +1781,9 @@ config DEBUG_UART_VIRT
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
-		DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \
-		DEBUG_OMAP7XXUART3
+	default 0 if DEBUG_FOOTBRIDGE_COM1 || DEBUG_BCM_5301X || \
+		DEBUG_BCM_HR2
+	default 3 if DEBUG_MSTARV7_PMUART
 	default 2
 
 config DEBUG_UART_8250_WORD
@@ -1836,9 +1793,9 @@ config DEBUG_UART_8250_WORD
 	default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \
 		DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \
 		DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \
-		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
-		DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \
-		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
+		DEBUG_DAVINCI_DA8XX_UART1 || DEBUG_DAVINCI_DA8XX_UART2 || \
+		DEBUG_BCM_IPROC_UART3 || DEBUG_BCM_KONA_UART || \
+		DEBUG_RK32_UART2
 
 config DEBUG_UART_8250_PALMCHIP
 	bool "8250 UART is Palmchip BK-310x"
@@ -1850,7 +1807,8 @@ config DEBUG_UART_8250_PALMCHIP
 
 config DEBUG_UNCOMPRESS
 	bool "Enable decompressor debugging via DEBUG_LL output"
-	depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
+	depends on !ARCH_MULTIPLATFORM
+	depends on !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
 		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
 		     !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING
@@ -1867,9 +1825,8 @@ config DEBUG_UNCOMPRESS
 
 config UNCOMPRESS_INCLUDE
 	string
-	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
-					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
-	default "mach/uncompress.h"
+	default "mach/uncompress.h" if ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100
+	default "debug/uncompress.h"
 
 config EARLY_PRINTK
 	bool "Early printk"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index dad5502ecc28..547e5856eaa0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -22,6 +22,9 @@ GZFLAGS		:=-9
 # Never generate .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
 
+# Disable FDPIC ABI
+KBUILD_CFLAGS	+= $(call cc-option,-mno-fdpic)
+
 # This should work on most of the modern platforms
 KBUILD_DEFCONFIG := multi_v7_defconfig
 
@@ -57,47 +60,54 @@ endif
 KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
 
 # This selects which instruction set is used.
+arch-$(CONFIG_CPU_32v7M)	:=-march=armv7-m
+arch-$(CONFIG_CPU_32v7)		:=-march=armv7-a
+arch-$(CONFIG_CPU_32v6)		:=-march=armv6
+# Only override the compiler option if ARMv6. The ARMv6K extensions are
+# always available in ARMv7
+ifeq ($(CONFIG_CPU_32v6),y)
+arch-$(CONFIG_CPU_32v6K)	:=-march=armv6k
+endif
+arch-$(CONFIG_CPU_32v5)		:=-march=armv5te
+arch-$(CONFIG_CPU_32v4T)	:=-march=armv4t
+arch-$(CONFIG_CPU_32v4)		:=-march=armv4
+arch-$(CONFIG_CPU_32v3)		:=-march=armv3m
+
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+cpp-$(CONFIG_CPU_32v7M)		:=-D__LINUX_ARM_ARCH__=7
+cpp-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7
+cpp-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
 ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+cpp-$(CONFIG_CPU_32v6K)		:=-D__LINUX_ARM_ARCH__=6
 endif
-arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
-arch-$(CONFIG_CPU_32v4T)	=-D__LINUX_ARM_ARCH__=4 -march=armv4t
-arch-$(CONFIG_CPU_32v4)		=-D__LINUX_ARM_ARCH__=4 -march=armv4
-arch-$(CONFIG_CPU_32v3)		=-D__LINUX_ARM_ARCH__=3 -march=armv3m
-
-# Evaluate arch cc-option calls now
-arch-y := $(arch-y)
+cpp-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5
+cpp-$(CONFIG_CPU_32v4T)		:=-D__LINUX_ARM_ARCH__=4
+cpp-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4
+cpp-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3
 
 # This selects how we optimise for the processor.
-tune-$(CONFIG_CPU_ARM7TDMI)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM720T)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM740T)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM9TDMI)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM940T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
-tune-$(CONFIG_CPU_ARM920T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM922T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM925T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM926T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_FA526)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_SA110)	=-mtune=strongarm110
-tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3)		=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-
-# Evaluate tune cc-option calls now
-tune-y := $(tune-y)
+tune-$(CONFIG_CPU_ARM7TDMI)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM740T)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM9TDMI)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM940T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM946E)	:=-mtune=arm9e
+tune-$(CONFIG_CPU_ARM920T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_FA526)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
+tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
+tune-$(CONFIG_CPU_XSCALE)	:=-mtune=xscale
+tune-$(CONFIG_CPU_XSC3)		:=-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON)	:=-mtune=xscale
+tune-$(CONFIG_CPU_V6)		:=-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K)		:=-mtune=arm1136j-s
 
 ifeq ($(CONFIG_AEABI),y)
 CFLAGS_ABI	:=-mabi=aapcs-linux -mfpu=vfp
@@ -113,34 +123,35 @@ ifeq ($(CONFIG_CC_IS_CLANG),y)
 CFLAGS_ABI	+= -meabi gnu
 endif
 
+ifeq ($(CONFIG_CURRENT_POINTER_IN_TPIDRURO),y)
+KBUILD_CFLAGS	+= -mtp=cp15
+endif
+
 # Accept old syntax despite ".syntax unified"
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
 
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
-CFLAGS_ISA	:=-mthumb -Wa,-mimplicit-it=always $(AFLAGS_NOWARN)
+CFLAGS_ISA	:=-Wa,-mimplicit-it=always $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA) -Wa$(comma)-mthumb
+CFLAGS_ISA	+=-mthumb
 else
 CFLAGS_ISA	:=$(call cc-option,-marm,) $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA)
 endif
 
 # Need -Uarm for gcc < 3.x
+KBUILD_CPPFLAGS	+=$(cpp-y)
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) -Wa,$(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS	+= -D__arm__
 
-#Default value
-head-y		:= arch/arm/kernel/head$(MMUEXT).o
-
 # Text offset. This list is sorted numerically by address in order to
 # provide a means to avoid/resolve conflicts in multi-arch kernels.
 # Note: the 32kB below this value is reserved for use by the kernel
 # during boot, and this offset is critical to the functioning of
 # kexec-tools.
 textofs-y	:= 0x00008000
-# We don't want the htc bootloader to corrupt kernel during resume
-textofs-$(CONFIG_PM_H1940)      := 0x00108000
 # RTD1195 has Boot ROM at start of address space
 textofs-$(CONFIG_ARCH_REALTEK)  := 0x00108000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
@@ -156,6 +167,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_ACTIONS)		+= actions
+machine-$(CONFIG_ARCH_AIROHA)		+= airoha
 machine-$(CONFIG_ARCH_ALPINE)		+= alpine
 machine-$(CONFIG_ARCH_ARTPEC)		+= artpec
 machine-$(CONFIG_ARCH_ASPEED)           += aspeed
@@ -164,7 +176,6 @@ machine-$(CONFIG_ARCH_AXXIA)		+= axxia
 machine-$(CONFIG_ARCH_BCM)		+= bcm
 machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
-machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
 machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
 machine-$(CONFIG_ARCH_DIGICOLOR)	+= digicolor
 machine-$(CONFIG_ARCH_DOVE)		+= dove
@@ -174,15 +185,13 @@ machine-$(CONFIG_ARCH_FOOTBRIDGE)	+= footbridge
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_HISI)		+= hisi
-machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
-machine-$(CONFIG_ARCH_IOP32X)		+= iop32x
+machine-$(CONFIG_ARCH_HPE)		+= hpe
 machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
 machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MMP)		+= mmp
-machine-$(CONFIG_ARCH_MPS2)		+= vexpress
 machine-$(CONFIG_ARCH_MOXART)		+= moxart
 machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
@@ -194,71 +203,48 @@ machine-$(CONFIG_ARCH_MSTARV7)		+= mstar
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
 machine-$(CONFIG_ARCH_NPCM)		+= npcm
 machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
-machine-$(CONFIG_ARCH_OXNAS)		+= oxnas
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
 machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_QCOM)		+= qcom
-machine-$(CONFIG_ARCH_RDA)		+= rda
 machine-$(CONFIG_ARCH_REALTEK)		+= realtek
-machine-$(CONFIG_ARCH_REALVIEW)		+= realview
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
 machine-$(CONFIG_PLAT_SAMSUNG)		+= s3c
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
 machine-$(CONFIG_ARCH_RENESAS)	 	+= shmobile
-machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
+machine-$(CONFIG_ARCH_INTEL_SOCFPGA)	+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
 machine-$(CONFIG_ARCH_STM32)		+= stm32
+machine-$(CONFIG_ARCH_SUNPLUS)		+= sunplus
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
 machine-$(CONFIG_ARCH_U8500)		+= ux500
-machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
-machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
+machine-$(CONFIG_PLAT_VERSATILE)	+= versatile
 machine-$(CONFIG_PLAT_SPEAR)		+= spear
 
-# Platform directory name.  This list is sorted alphanumerically
-# by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_OMAP)	+= omap
-plat-$(CONFIG_PLAT_ORION)	+= orion
-plat-$(CONFIG_PLAT_PXA)		+= pxa
-plat-$(CONFIG_PLAT_VERSATILE)	+= versatile
+# legacy platforms provide their own mach/*.h headers globally,
+# these three are mutually exclusive
+machdirs-$(CONFIG_ARCH_FOOTBRIDGE)	+= arch/arm/mach-footbridge
+machdirs-$(CONFIG_ARCH_RPC)		+= arch/arm/mach-rpc
+machdirs-$(CONFIG_ARCH_SA1100)		+= arch/arm/mach-sa1100
+KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%/include,$(machdirs-y))
 
 # The byte offset of the kernel image in RAM from the start of RAM.
 TEXT_OFFSET := $(textofs-y)
 
-# The first directory contains additional information for the boot setup code
-ifneq ($(machine-y),)
-MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
-else
-MACHINE  :=
-endif
-ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
-MACHINE  :=
-endif
-
-machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
-platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
-
-ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
-ifneq ($(CONFIG_ARM_SINGLE_ARMV7M),y)
-KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
-endif
-endif
-
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
-core-y				+= arch/arm/
 # If we have a machine-specific directory, then include it in the build.
-core-y				+= $(machdirs) $(platdirs)
-
+core-y				+= $(patsubst %,arch/arm/mach-%/,$(machine-y))
 # For cleaning
-core-				+= $(patsubst %,arch/arm/mach-%/, $(machine-))
-core-				+= $(patsubst %,arch/arm/plat-%/, $(plat-))
+core-				+= $(patsubst %,arch/arm/mach-%/,$(machine-))
+
+core-$(CONFIG_PLAT_ORION)	+= arch/arm/plat-orion/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
 
@@ -272,17 +258,23 @@ endif
 
 ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
 prepare: stack_protector_prepare
+ifeq ($(CONFIG_CC_HAVE_STACKPROTECTOR_TLS),y)
+stack_protector_prepare: prepare0
+	$(eval KBUILD_CFLAGS += \
+		-mstack-protector-guard=tls \
+		-mstack-protector-guard-offset=$(shell	\
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\
+				include/generated/asm-offsets.h))
+else
 stack_protector_prepare: prepare0
 	$(eval SSP_PLUGIN_CFLAGS := \
-		-fplugin-arg-arm_ssp_per_task_plugin-tso=$(shell	\
-			awk '{if ($$2 == "THREAD_SZ_ORDER") print $$3;}'\
-				include/generated/asm-offsets.h)	\
 		-fplugin-arg-arm_ssp_per_task_plugin-offset=$(shell	\
-			awk '{if ($$2 == "TI_STACK_CANARY") print $$3;}'\
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\
 				include/generated/asm-offsets.h))
 	$(eval KBUILD_CFLAGS += $(SSP_PLUGIN_CFLAGS))
 	$(eval GCC_PLUGINS_CFLAGS += $(SSP_PLUGIN_CFLAGS))
 endif
+endif
 
 all:	$(notdir $(KBUILD_IMAGE))
 
@@ -305,11 +297,12 @@ bootpImage uImage: zImage
 zImage: Image
 
 $(BOOT_TARGETS): vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 	@$(kecho) '  Kernel: $(boot)/$@ is ready'
 
+$(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@)
 $(INSTALL_TARGETS):
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
+	$(call cmd,install)
 
 PHONY += vdso_install
 vdso_install:
@@ -317,13 +310,13 @@ ifeq ($(CONFIG_VDSO),y)
 	$(Q)$(MAKE) $(build)=arch/arm/vdso $@
 endif
 
-# We use MRPROPER_FILES and CLEAN_FILES now
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
-
 # My testing targets (bypasses dependencies)
-bp:;	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage
+bp:;	$(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage
 
+include $(srctree)/scripts/Makefile.defconf
+PHONY += multi_v7_lpae_defconfig
+multi_v7_lpae_defconfig:
+	$(call merge_into_defconfig,multi_v7_defconfig,lpae)
 
 define archhelp
   echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
@@ -339,4 +332,6 @@ define archhelp
   echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
   echo  '  vdso_install  - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso'
+  echo
+  echo  '  multi_v7_lpae_defconfig     - multi_v7_defconfig with CONFIG_ARM_LPAE enabled'
 endef
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 0b3cd7a33a26..abd6a2889fd0 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -10,22 +10,16 @@
 #
 # Copyright (C) 1995-2002 Russell King
 #
-
 OBJCOPYFLAGS	:=-O binary -R .comment -S
 
-ifneq ($(MACHINE),)
-include $(MACHINE)/Makefile.boot
-endif
-
-# Note: the following conditions must always be true:
 #   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
-#   PARAMS_PHYS must be within 4MB of ZRELADDR
-#   INITRD_PHYS must be in RAM
-ZRELADDR    := $(zreladdr-y)
-PARAMS_PHYS := $(params_phys-y)
-INITRD_PHYS := $(initrd_phys-y)
+ifdef CONFIG_PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
+ZRELADDR    := $(call add_hex, $(CONFIG_PHYS_OFFSET), $(TEXT_OFFSET))
+endif
 
-export ZRELADDR INITRD_PHYS PARAMS_PHYS
+PHYS_OFFSET := $(CONFIG_PHYS_OFFSET)
+export ZRELADDR PARAMS_PHYS PHYS_OFFSET
 
 targets := Image zImage xipImage bootpImage uImage
 
@@ -90,29 +84,10 @@ $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
 
-$(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
+$(obj)/bootp/bootp: $(obj)/zImage FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
 
-PHONY += initrd install zinstall uinstall
-initrd:
-	@test "$(INITRD_PHYS)" != "" || \
-	(echo This machine does not support INITRD; exit -1)
-	@test "$(INITRD)" != "" || \
-	(echo You must specify INITRD; exit -1)
-
-install:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/Image System.map "$(INSTALL_PATH)"
-
-zinstall:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/zImage System.map "$(INSTALL_PATH)"
-
-uinstall:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/uImage System.map "$(INSTALL_PATH)"
-
 subdir-	    := bootp compressed dts
diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile
index 981a8d03f064..a2934e6fd89a 100644
--- a/arch/arm/boot/bootp/Makefile
+++ b/arch/arm/boot/bootp/Makefile
@@ -5,9 +5,40 @@
 # This file is included by the global makefile so that you can add your own
 # architecture-specific flags and dependencies.
 #
-
 GCOV_PROFILE	:= n
 
+ifdef PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
+
+# If PHYS_OFFSET is set, INITRD_PHYS and PARAMS_PHYS can be derived,
+# otherwise they must be passed on the command line.
+#
+# Note: the following conditions must always be true:
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+
+PARAMS_PHYS := $(call add_hex, $(PHYS_OFFSET), 0x100)
+
+# guess an initrd location if possible
+initrd_offset-$(CONFIG_ARCH_FOOTBRIDGE)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_SA1100)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_RPC)	+= 0x08000000
+INITRD_OFFSET := $(initrd_offset-y)
+ifdef INITRD_OFFSET
+INITRD_PHYS := $(call add_hex, $(PHYS_OFFSET), $(INITRD_OFFSET))
+endif
+
+endif
+
+PHONY += initrd
+initrd:
+	@test "$(PARAMS_PHYS)" != "" || \
+	(echo bootpImage: You must specify PHYS_OFFSET of PARAMS_PHYS ; exit -1)
+	@test "$(INITRD_PHYS)" != "" || \
+	(echo bootpImage: You must specify INITRD_OFFSET or INITRD_PHYS ; exit -1)
+	@test "$(INITRD)" != "" || \
+	(echo bootpImage: You must specify INITRD; exit -1)
+
 LDFLAGS_bootp	:= --no-undefined -X \
 		 --defsym initrd_phys=$(INITRD_PHYS) \
 		 --defsym params_phys=$(PARAMS_PHYS) -T
@@ -24,6 +55,6 @@ $(obj)/bootp:	$(src)/bootp.lds $(addprefix $(obj)/,init.o kernel.o initrd.o) FOR
 
 $(obj)/kernel.o: arch/arm/boot/zImage FORCE
 
-$(obj)/initrd.o: $(INITRD) FORCE
+$(obj)/initrd.o: initrd $(INITRD) FORCE
 
 PHONY += $(INITRD)
diff --git a/arch/arm/boot/bootp/bootp.lds b/arch/arm/boot/bootp/bootp.lds
index fc54394f4340..160128186bf8 100644
--- a/arch/arm/boot/bootp/bootp.lds
+++ b/arch/arm/boot/bootp/bootp.lds
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/boot/bootp/bootp.lds
  *
  *  Copyright (C) 2000-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 OUTPUT_ARCH(arm)
 ENTRY(_start)
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index 60606b0f378d..d32f41778437 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,9 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-ashldi3.S
-bswapsdi2.S
-font.c
-lib1funcs.S
-hyp-stub.S
 piggy_data
 vmlinux
 vmlinux.lds
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index fd94e27ba4fa..726ecabcef09 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -13,7 +13,6 @@ ifeq ($(CONFIG_DEBUG_UNCOMPRESS),y)
 OBJS	+= debug.o
 AFLAGS_head.o += -DDEBUG
 endif
-FONTC	= $(srctree)/lib/fonts/font_acorn_8x8.c
 
 # string library code (-Os is enforced to keep it much smaller)
 OBJS		+= string.o
@@ -28,6 +27,7 @@ KASAN_SANITIZE		:= n
 
 # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
 KCOV_INSTRUMENT		:= n
+UBSAN_SANITIZE		:= n
 
 #
 # Architecture dependencies
@@ -77,49 +77,39 @@ CPPFLAGS_vmlinux.lds += -DTEXT_OFFSET="$(TEXT_OFFSET)"
 CPPFLAGS_vmlinux.lds += -DMALLOC_SIZE="$(MALLOC_SIZE)"
 
 compress-$(CONFIG_KERNEL_GZIP) = gzip
-compress-$(CONFIG_KERNEL_LZO)  = lzo
-compress-$(CONFIG_KERNEL_LZMA) = lzma
-compress-$(CONFIG_KERNEL_XZ)   = xzkern
-compress-$(CONFIG_KERNEL_LZ4)  = lz4
+compress-$(CONFIG_KERNEL_LZO)  = lzo_with_size
+compress-$(CONFIG_KERNEL_LZMA) = lzma_with_size
+compress-$(CONFIG_KERNEL_XZ)   = xzkern_with_size
+compress-$(CONFIG_KERNEL_LZ4)  = lz4_with_size
 
 libfdt_objs := fdt_rw.o fdt_ro.o fdt_wip.o fdt.o
 
 ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+CFLAGS_REMOVE_atags_to_fdt.o += -Wframe-larger-than=${CONFIG_FRAME_WARN}
+CFLAGS_atags_to_fdt.o += -Wframe-larger-than=1280
 OBJS	+= $(libfdt_objs) atags_to_fdt.o
 endif
 ifeq ($(CONFIG_USE_OF),y)
 OBJS	+= $(libfdt_objs) fdt_check_mem_start.o
 endif
 
-# -fstack-protector-strong triggers protection checks in this code,
-# but it is being used too early to link to meaningful stack_chk logic.
-$(foreach o, $(libfdt_objs) atags_to_fdt.o fdt_check_mem_start.o, \
-	$(eval CFLAGS_$(o) := -I $(srctree)/scripts/dtc/libfdt -fno-stack-protector))
-
-# These were previously generated C files. When you are building the kernel
-# with O=, make sure to remove the stale files in the output tree. Otherwise,
-# the build system wrongly compiles the stale ones.
-ifdef building_out_of_srctree
-$(shell rm -f $(addprefix $(obj)/, fdt_rw.c fdt_ro.c fdt_wip.c fdt.c))
-endif
+OBJS	+= lib1funcs.o ashldi3.o bswapsdi2.o
 
 targets       := vmlinux vmlinux.lds piggy_data piggy.o \
-		 lib1funcs.o ashldi3.o bswapsdi2.o \
 		 head.o $(OBJS)
 
-clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S hyp-stub.S
-
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 
 ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \
+	     -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
 	     -I$(obj) $(DISABLE_ARM_SSP_PER_TASK_PLUGIN)
 ccflags-remove-$(CONFIG_FUNCTION_TRACER) += -pg
 asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell echo $$(($$($(NM) $(obj)/../../../../vmlinux | \
-		sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \
-		       -e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) )
+KBSS_SZ = $(shell echo $$(($$($(NM) vmlinux | \
+		sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \
+		       -e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) )
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)
@@ -134,29 +124,11 @@ LDFLAGS_vmlinux += --no-undefined
 LDFLAGS_vmlinux += -X
 # Report orphan sections
 ifdef CONFIG_LD_ORPHAN_WARN
-LDFLAGS_vmlinux += --orphan-handling=warn
+LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
 endif
 # Next argument is a linker script
 LDFLAGS_vmlinux += -T
 
-# For __aeabi_uidivmod
-lib1funcs = $(obj)/lib1funcs.o
-
-$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S
-	$(call cmd,shipped)
-
-# For __aeabi_llsl
-ashldi3 = $(obj)/ashldi3.o
-
-$(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S
-	$(call cmd,shipped)
-
-# For __bswapsi2, __bswapdi2
-bswapsdi2 = $(obj)/bswapsdi2.o
-
-$(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S
-	$(call cmd,shipped)
-
 # We need to prevent any GOTOFF relocs being used with references
 # to symbols in the .bss section since we cannot relocate them
 # independently from the rest at run time.  This can be achieved by
@@ -180,8 +152,8 @@ fi
 efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a
 
 $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
-		$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
-		$(bswapsdi2) $(efi-obj-y) FORCE
+		$(addprefix $(obj)/, $(OBJS)) \
+		$(efi-obj-y) FORCE
 	@$(check_for_multiple_zreladdr)
 	$(call if_changed,ld)
 	@$(check_for_bad_syms)
@@ -192,11 +164,3 @@ $(obj)/piggy_data: $(obj)/../Image FORCE
 $(obj)/piggy.o: $(obj)/piggy_data
 
 CFLAGS_font.o := -Dstatic=
-
-$(obj)/font.c: $(FONTC)
-	$(call cmd,shipped)
-
-AFLAGS_hyp-stub.o := -Wa,-march=armv7-a
-
-$(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S
-	$(call cmd,shipped)
diff --git a/arch/arm/boot/compressed/ashldi3.S b/arch/arm/boot/compressed/ashldi3.S
new file mode 100644
index 000000000000..216f82eda609
--- /dev/null
+++ b/arch/arm/boot/compressed/ashldi3.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __aeabi_llsl */
+#include "../../lib/ashldi3.S"
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
index 31927d2fe297..1feb6b0f7a1f 100644
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -121,7 +121,7 @@ static void hex_str(char *out, uint32_t value)
 /*
  * Convert and fold provided ATAGs into the provided FDT.
  *
- * REturn values:
+ * Return values:
  *    = 0 -> pretend success
  *    = 1 -> bad ATAG (may retry with another possible ATAG pointer)
  *    < 0 -> error from libfdt
diff --git a/arch/arm/boot/compressed/bswapsdi2.S b/arch/arm/boot/compressed/bswapsdi2.S
new file mode 100644
index 000000000000..b2156b378c7b
--- /dev/null
+++ b/arch/arm/boot/compressed/bswapsdi2.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __bswapsi2, __bswapdi2 */
+#include "../../lib/bswapsdi2.S"
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
index aa075d8372ea..0669851394f0 100644
--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -31,6 +31,7 @@
 /* Not needed, but used in some headers pulled in by decompressors */
 extern char * strstr(const char * s1, const char *s2);
 extern size_t strlen(const char *s);
+extern int strcmp(const char *cs, const char *ct);
 extern int memcmp(const void *cs, const void *ct, size_t count);
 extern char * strchrnul(const char *, int);
 
@@ -47,7 +48,10 @@ extern char * strchrnul(const char *, int);
 #endif
 
 #ifdef CONFIG_KERNEL_XZ
+/* Prevent KASAN override of string helpers in decompressor */
+#undef memmove
 #define memmove memmove
+#undef memcpy
 #define memcpy memcpy
 #include "../../../../lib/decompress_unxz.c"
 #endif
diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S
index c0e7a745103e..230030c13085 100644
--- a/arch/arm/boot/compressed/efi-header.S
+++ b/arch/arm/boot/compressed/efi-header.S
@@ -9,16 +9,22 @@
 #include <linux/sizes.h>
 
 		.macro	__nop
-#ifdef CONFIG_EFI_STUB
-		@ This is almost but not quite a NOP, since it does clobber the
-		@ condition flags. But it is the best we can do for EFI, since
-		@ PE/COFF expects the magic string "MZ" at offset 0, while the
-		@ ARM/Linux boot protocol expects an executable instruction
-		@ there.
-		.inst	MZ_MAGIC | (0x1310 << 16)	@ tstne r0, #0x4d000
-#else
  AR_CLASS(	mov	r0, r0		)
   M_CLASS(	nop.w			)
+		.endm
+
+		.macro __initial_nops
+#ifdef CONFIG_EFI_STUB
+		@ This is a two-instruction NOP, which happens to bear the
+		@ PE/COFF signature "MZ" in the first two bytes, so the kernel
+		@ is accepted as an EFI binary. Booting via the UEFI stub
+		@ will not execute those instructions, but the ARM/Linux
+		@ boot protocol does, so we need some NOPs here.
+		.inst	MZ_MAGIC | (0xe225 << 16)	@ eor r5, r5, 0x4d000
+		eor	r5, r5, 0x4d000			@ undo previous insn
+#else
+		__nop
+		__nop
 #endif
 		.endm
 
diff --git a/arch/arm/boot/compressed/fdt_check_mem_start.c b/arch/arm/boot/compressed/fdt_check_mem_start.c
index 62450d824c3c..9291a2661bdf 100644
--- a/arch/arm/boot/compressed/fdt_check_mem_start.c
+++ b/arch/arm/boot/compressed/fdt_check_mem_start.c
@@ -55,16 +55,17 @@ static uint64_t get_val(const fdt32_t *cells, uint32_t ncells)
  * DTB, and, if out-of-range, replace it by the real start address.
  * To preserve backwards compatibility (systems reserving a block of memory
  * at the start of physical memory, kdump, ...), the traditional method is
- * always used if it yields a valid address.
+ * used if it yields a valid address, unless the "linux,usable-memory-range"
+ * property is present.
  *
  * Return value: start address of physical memory to use
  */
 uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
 {
-	uint32_t addr_cells, size_cells, base;
+	uint32_t addr_cells, size_cells, usable_base, base;
 	uint32_t fdt_mem_start = 0xffffffff;
-	const fdt32_t *reg, *endp;
-	uint64_t size, end;
+	const fdt32_t *usable, *reg, *endp;
+	uint64_t size, usable_end, end;
 	const char *type;
 	int offset, len;
 
@@ -80,6 +81,27 @@ uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
 	if (addr_cells > 2 || size_cells > 2)
 		return mem_start;
 
+	/*
+	 * Usable memory in case of a crash dump kernel
+	 * This property describes a limitation: memory within this range is
+	 * only valid when also described through another mechanism
+	 */
+	usable = get_prop(fdt, "/chosen", "linux,usable-memory-range",
+			  (addr_cells + size_cells) * sizeof(fdt32_t));
+	if (usable) {
+		size = get_val(usable + addr_cells, size_cells);
+		if (!size)
+			return mem_start;
+
+		if (addr_cells > 1 && fdt32_ld(usable)) {
+			/* Outside 32-bit address space */
+			return mem_start;
+		}
+
+		usable_base = fdt32_ld(usable + addr_cells - 1);
+		usable_end = usable_base + size;
+	}
+
 	/* Walk all memory nodes and regions */
 	for (offset = fdt_next_node(fdt, -1, NULL); offset >= 0;
 	     offset = fdt_next_node(fdt, offset, NULL)) {
@@ -107,7 +129,20 @@ uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
 
 			base = fdt32_ld(reg + addr_cells - 1);
 			end = base + size;
-			if (mem_start >= base && mem_start < end) {
+			if (usable) {
+				/*
+				 * Clip to usable range, which takes precedence
+				 * over mem_start
+				 */
+				if (base < usable_base)
+					base = usable_base;
+
+				if (end > usable_end)
+					end = usable_end;
+
+				if (end <= base)
+					continue;
+			} else if (mem_start >= base && mem_start < end) {
 				/* Calculated address is valid, use it */
 				return mem_start;
 			}
@@ -123,7 +158,8 @@ uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
 	}
 
 	/*
-	 * The calculated address is not usable.
+	 * The calculated address is not usable, or was overridden by the
+	 * "linux,usable-memory-range" property.
 	 * Use the lowest usable physical memory address from the DTB instead,
 	 * and make sure this is a multiple of 2 MiB for phys/virt patching.
 	 */
diff --git a/arch/arm/boot/compressed/font.c b/arch/arm/boot/compressed/font.c
new file mode 100644
index 000000000000..46a677649db4
--- /dev/null
+++ b/arch/arm/boot/compressed/font.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fonts/font_acorn_8x8.c"
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 95abdd850fe3..23eae1a65064 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -20,10 +20,6 @@ __SA1100_start:
 #ifdef CONFIG_SA1100_COLLIE
 		mov	r7, #MACH_TYPE_COLLIE
 #endif
-#ifdef CONFIG_SA1100_SIMPAD
-		@ UNTIL we've something like an open bootldr
-		mov	r7, #MACH_TYPE_SIMPAD	@should be 87
-#endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		ands	r0, r0, #0x0d
 		beq	99f
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index b1cb1972361b..9f406e9c0ea6 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -67,11 +67,7 @@
 #if defined(CONFIG_ARCH_SA1100)
 		.macro	loadsp, rb, tmp1, tmp2
 		mov	\rb, #0x80000000	@ physical base address
-#ifdef CONFIG_DEBUG_LL_SER3
-		add	\rb, \rb, #0x00050000	@ Ser3
-#else
 		add	\rb, \rb, #0x00010000	@ Ser1
-#endif
 		.endm
 #else
 		.macro	loadsp,	rb, tmp1, tmp2
@@ -203,7 +199,8 @@ start:
 		 * were patching the initial instructions of the kernel, i.e
 		 * had started to exploit this "patch area".
 		 */
-		.rept	7
+		__initial_nops
+		.rept	5
 		__nop
 		.endr
 #ifndef CONFIG_THUMB2_KERNEL
diff --git a/arch/arm/boot/compressed/hyp-stub.S b/arch/arm/boot/compressed/hyp-stub.S
new file mode 100644
index 000000000000..a703eaa86f10
--- /dev/null
+++ b/arch/arm/boot/compressed/hyp-stub.S
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#include "../../kernel/hyp-stub.S"
diff --git a/arch/arm/boot/compressed/lib1funcs.S b/arch/arm/boot/compressed/lib1funcs.S
new file mode 100644
index 000000000000..815dec73ba4d
--- /dev/null
+++ b/arch/arm/boot/compressed/lib1funcs.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __aeabi_uidivmod */
+#include "../../lib/lib1funcs.S"
diff --git a/arch/arm/boot/compressed/misc-ep93xx.h b/arch/arm/boot/compressed/misc-ep93xx.h
new file mode 100644
index 000000000000..65b4121d1490
--- /dev/null
+++ b/arch/arm/boot/compressed/misc-ep93xx.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ */
+
+#include <asm/mach-types.h>
+
+static inline unsigned int __raw_readl(unsigned int ptr)
+{
+	return *((volatile unsigned int *)ptr);
+}
+
+static inline void __raw_writeb(unsigned char value, unsigned int ptr)
+{
+	*((volatile unsigned char *)ptr) = value;
+}
+
+static inline void __raw_writel(unsigned int value, unsigned int ptr)
+{
+	*((volatile unsigned int *)ptr) = value;
+}
+
+/*
+ * Some bootloaders don't turn off DMA from the ethernet MAC before
+ * jumping to linux, which means that we might end up with bits of RX
+ * status and packet data scribbled over the uncompressed kernel image.
+ * Work around this by resetting the ethernet MAC before we uncompress.
+ */
+#define PHYS_ETH_SELF_CTL		0x80010020
+#define ETH_SELF_CTL_RESET		0x00000001
+
+static inline void ep93xx_ethernet_reset(void)
+{
+	unsigned int v;
+
+	/* Reset the ethernet MAC.  */
+	v = __raw_readl(PHYS_ETH_SELF_CTL);
+	__raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
+
+	/* Wait for reset to finish.  */
+	while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
+		;
+}
+
+#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
+#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
+#define TS72XX_WDT_FEED_VAL		0x05
+
+static inline void __maybe_unused ts72xx_watchdog_disable(void)
+{
+	__raw_writeb(TS72XX_WDT_FEED_VAL, TS72XX_WDT_FEED_PHYS_BASE);
+	__raw_writeb(0, TS72XX_WDT_CONTROL_PHYS_BASE);
+}
+
+static inline void ep93xx_decomp_setup(void)
+{
+	if (machine_is_ts72xx())
+		ts72xx_watchdog_disable();
+
+	if (machine_is_edb9301() ||
+	    machine_is_edb9302() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9307() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9312() ||
+	    machine_is_edb9315() ||
+	    machine_is_edb9315a() ||
+	    machine_is_edb9315a() ||
+	    machine_is_ts72xx() ||
+	    machine_is_bk3() ||
+	    machine_is_vision_ep9307())
+		ep93xx_ethernet_reset();
+}
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index e1e9a5dde853..abfed1aa2baa 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -23,6 +23,9 @@ unsigned int __machine_arch_type;
 #include <linux/types.h>
 #include <linux/linkage.h>
 #include "misc.h"
+#ifdef CONFIG_ARCH_EP93XX
+#include "misc-ep93xx.h"
+#endif
 
 static void putstr(const char *ptr);
 
@@ -128,13 +131,6 @@ asmlinkage void __div0(void)
 	error("Attempting division by 0!");
 }
 
-const unsigned long __stack_chk_guard = 0x000a0dff;
-
-void __stack_chk_fail(void)
-{
-	error("stack-protector: Kernel stack is corrupted\n");
-}
-
 extern int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
 
 
@@ -150,6 +146,9 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
+#ifdef CONFIG_ARCH_EP93XX
+	ep93xx_decomp_setup();
+#endif
 	arch_decomp_setup();
 
 	putstr("Uncompressing Linux...");
diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c
index 8c0fa276d994..fcc678fce045 100644
--- a/arch/arm/boot/compressed/string.c
+++ b/arch/arm/boot/compressed/string.c
@@ -5,6 +5,7 @@
  * Small subset of simple string routines
  */
 
+#define __NO_FORTIFY
 #include <linux/string.h>
 
 /*
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
index 1bcb68ac4b01..3fcb3e62dc56 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -23,6 +23,7 @@ SECTIONS
     *(.ARM.extab*)
     *(.note.*)
     *(.rel.*)
+    *(.printk_index)
     /*
      * Discard any r/w data - this produces a link error if we have any,
      * which is required for PIC decompression.  Local data generates
@@ -57,6 +58,7 @@ SECTIONS
     *(.rodata)
     *(.rodata.*)
     *(.data.rel.ro)
+    *(.data.rel.ro.*)
   }
   .piggydata : {
     *(.piggydata)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 8e5d4ab4e75e..59829fc90315 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -25,6 +25,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
 	usb_a9263.dtb \
 	at91-foxg20.dtb \
 	at91-kizbox.dtb \
+	at91-lmu5000.dtb \
 	at91sam9g20ek.dtb \
 	at91sam9g20ek_2mmc.dtb \
 	tny_a9g20.dtb \
@@ -40,6 +41,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
 	at91-kizboxmini-base.dtb \
 	at91-kizboxmini-mb.dtb \
 	at91-kizboxmini-rd.dtb \
+	at91-q5xr5.dtb \
 	at91-smartkiz.dtb \
 	at91-wb45n.dtb \
 	at91sam9g15ek.dtb \
@@ -49,6 +51,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
 	at91sam9x25ek.dtb \
 	at91sam9x35ek.dtb
 dtb-$(CONFIG_SOC_SAM9X60) += \
+	at91-sam9x60_curiosity.dtb \
 	at91-sam9x60ek.dtb
 dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-kizbox2-2.dtb \
@@ -59,6 +62,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-sama5d2_icp.dtb \
 	at91-sama5d2_ptc_ek.dtb \
 	at91-sama5d2_xplained.dtb \
+	at91-sama5d3_eds.dtb \
+	at91-sama5d3_ksz9477_evb.dtb \
 	at91-sama5d3_xplained.dtb \
 	at91-dvk_som60.dtb \
 	at91-gatwick.dtb \
@@ -74,6 +79,10 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-sama5d4_xplained.dtb \
 	at91-sama5d4ek.dtb \
 	at91-vinco.dtb
+dtb-$(CONFIG_SOC_SAMA7G5) += \
+	at91-sama7g5ek.dtb
+dtb-$(CONFIG_SOC_SP7021) += \
+	sunplus-sp7021-demo-v3.dtb
 dtb-$(CONFIG_ARCH_AXXIA) += \
 	axm5516-amarillo.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += \
@@ -88,13 +97,18 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2837-rpi-3-b.dtb \
 	bcm2837-rpi-3-b-plus.dtb \
 	bcm2837-rpi-cm3-io3.dtb \
+	bcm2837-rpi-zero-2-w.dtb \
+	bcm2711-rpi-400.dtb \
 	bcm2711-rpi-4-b.dtb \
+	bcm2711-rpi-cm4-io.dtb \
 	bcm2835-rpi-zero.dtb \
 	bcm2835-rpi-zero-w.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
 	bcm4708-asus-rt-ac68u.dtb \
 	bcm4708-buffalo-wzr-1750dhp.dtb \
+	bcm4708-buffalo-wzr-1166dhp.dtb \
+	bcm4708-buffalo-wzr-1166dhp2.dtb \
 	bcm4708-linksys-ea6300-v1.dtb \
 	bcm4708-linksys-ea6500-v2.dtb \
 	bcm4708-luxul-xap-1510.dtb \
@@ -114,7 +128,9 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4709-netgear-r7000.dtb \
 	bcm4709-netgear-r8000.dtb \
 	bcm4709-tplink-archer-c9-v1.dtb \
+	bcm47094-asus-rt-ac88u.dtb \
 	bcm47094-dlink-dir-885l.dtb \
+	bcm47094-dlink-dir-890l.dtb \
 	bcm47094-linksys-panamera.dtb \
 	bcm47094-luxul-abr-4500.dtb \
 	bcm47094-luxul-xap-1610.dtb \
@@ -124,6 +140,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm47094-luxul-xwr-3150-v1.dtb \
 	bcm47094-netgear-r8500.dtb \
 	bcm47094-phicomm-k3.dtb \
+	bcm53015-meraki-mr26.dtb \
+	bcm53016-dlink-dwl-8610ap.dtb \
 	bcm53016-meraki-mr32.dtb \
 	bcm94708.dtb \
 	bcm94709.dtb \
@@ -135,8 +153,6 @@ dtb-$(CONFIG_ARCH_BCM_53573) += \
 	bcm47189-luxul-xap-810.dtb \
 	bcm47189-tenda-ac9.dtb \
 	bcm947189acdbmr.dtb
-dtb-$(CONFIG_ARCH_BCM_63XX) += \
-	bcm963138dvt.dtb
 dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
 	bcm911360_entphn.dtb \
 	bcm911360k.dtb \
@@ -154,6 +170,12 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \
 	bcm958525xmc.dtb \
 	bcm958622hr.dtb \
 	bcm958623hr.dtb \
+	bcm958625-meraki-mx64.dtb \
+	bcm958625-meraki-mx64-a0.dtb \
+	bcm958625-meraki-mx64w.dtb \
+	bcm958625-meraki-mx64w-a0.dtb \
+	bcm958625-meraki-mx65.dtb \
+	bcm958625-meraki-mx65w.dtb \
 	bcm958625hr.dtb \
 	bcm988312hr.dtb \
 	bcm958625k.dtb
@@ -164,6 +186,16 @@ dtb-$(CONFIG_ARCH_BERLIN) += \
 	berlin2q-marvell-dmp.dtb
 dtb-$(CONFIG_ARCH_BRCMSTB) += \
 	bcm7445-bcm97445svmb.dtb
+dtb-$(CONFIG_ARCH_BCMBCA) += \
+	bcm947622.dtb \
+	bcm963138.dtb \
+	bcm963138dvt.dtb \
+	bcm963148.dtb \
+	bcm963178.dtb \
+	bcm96756.dtb \
+	bcm96846.dtb \
+	bcm96855.dtb \
+	bcm96878.dtb
 dtb-$(CONFIG_ARCH_CLPS711X) += \
 	ep7211-edb7211.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += \
@@ -173,6 +205,8 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \
 	da850-lego-ev3.dtb
 dtb-$(CONFIG_ARCH_DIGICOLOR) += \
 	cx92755_equinox.dtb
+dtb-$(CONFIG_ARCH_AIROHA) += \
+	en7523-evb.dtb
 dtb-$(CONFIG_ARCH_EXYNOS3) += \
 	exynos3250-artik5-eval.dtb \
 	exynos3250-monk.dtb \
@@ -207,18 +241,23 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
 	exynos5420-arndale-octa.dtb \
 	exynos5420-peach-pit.dtb \
 	exynos5420-smdk5420.dtb \
+	exynos5420-chagall-wifi.dtb \
+	exynos5420-klimt-wifi.dtb \
 	exynos5422-odroidhc1.dtb \
 	exynos5422-odroidxu3.dtb \
 	exynos5422-odroidxu3-lite.dtb \
 	exynos5422-odroidxu4.dtb \
+	exynos5422-samsung-k3g.dtb \
 	exynos5800-peach-pi.dtb
 dtb-$(CONFIG_ARCH_GEMINI) += \
 	gemini-dlink-dir-685.dtb \
 	gemini-dlink-dns-313.dtb \
 	gemini-nas4220b.dtb \
+	gemini-ns2502.dtb \
 	gemini-rut1xx.dtb \
 	gemini-sl93512r.dtb \
 	gemini-sq201.dtb \
+	gemini-ssi1328.dtb \
 	gemini-wbd111.dtb \
 	gemini-wbd222.dtb
 dtb-$(CONFIG_ARCH_HI3xxx) += \
@@ -234,13 +273,30 @@ dtb-$(CONFIG_ARCH_HISI) += \
 	hi3519-demb.dtb
 dtb-$(CONFIG_ARCH_HIX5HD2) += \
 	hisi-x5hd2-dkb.dtb
+dtb-$(CONFIG_ARCH_HPE_GXP) += \
+	hpe-bmc-dl360gen10.dtb
 dtb-$(CONFIG_ARCH_INTEGRATOR) += \
 	integratorap.dtb \
 	integratorap-im-pd1.dtb \
 	integratorcp.dtb
 dtb-$(CONFIG_ARCH_IXP4XX) += \
 	intel-ixp42x-linksys-nslu2.dtb \
-	intel-ixp43x-gateworks-gw2358.dtb
+	intel-ixp42x-linksys-wrv54g.dtb \
+	intel-ixp42x-freecom-fsg-3.dtb \
+	intel-ixp42x-welltech-epbx100.dtb \
+	intel-ixp42x-ixdp425.dtb \
+	intel-ixp43x-kixrp435.dtb \
+	intel-ixp46x-ixdp465.dtb \
+	intel-ixp42x-adi-coyote.dtb \
+	intel-ixp42x-ixdpg425.dtb \
+	intel-ixp42x-goramo-multilink.dtb \
+	intel-ixp42x-iomega-nas100d.dtb \
+	intel-ixp42x-dlink-dsm-g600.dtb \
+	intel-ixp42x-gateworks-gw2348.dtb \
+	intel-ixp43x-gateworks-gw2358.dtb \
+	intel-ixp42x-netgear-wg302v1.dtb \
+	intel-ixp42x-arcom-vulcan.dtb \
+	intel-ixp42x-gateway-7001.dtb
 dtb-$(CONFIG_ARCH_KEYSTONE) += \
 	keystone-k2hk-evm.dtb \
 	keystone-k2l-evm.dtb \
@@ -250,6 +306,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \
 dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-b3.dtb \
 	kirkwood-blackarmor-nas220.dtb \
+	kirkwood-c200-v1.dtb \
 	kirkwood-cloudbox.dtb \
 	kirkwood-d2net.dtb \
 	kirkwood-db-88f6281.dtb \
@@ -302,6 +359,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-ns2mini.dtb \
 	kirkwood-nsa310.dtb \
 	kirkwood-nsa310a.dtb \
+	kirkwood-nsa310s.dtb \
 	kirkwood-nsa320.dtb \
 	kirkwood-nsa325.dtb \
 	kirkwood-openblocks_a6.dtb \
@@ -333,8 +391,11 @@ dtb-$(CONFIG_ARCH_LPC18XX) += \
 dtb-$(CONFIG_ARCH_LPC32XX) += \
 	lpc3250-ea3250.dtb \
 	lpc3250-phy3250.dtb
+dtb-$(CONFIG_ARCH_WPCM450) += \
+	nuvoton-wpcm450-supermicro-x9sci-ln4f.dtb
 dtb-$(CONFIG_ARCH_NPCM7XX) += \
 	nuvoton-npcm730-gsj.dtb \
+	nuvoton-npcm730-gbs.dtb \
 	nuvoton-npcm730-kudo.dtb \
 	nuvoton-npcm750-evb.dtb \
 	nuvoton-npcm750-runbmc-olympus.dtb
@@ -406,6 +467,7 @@ dtb-$(CONFIG_SOC_IMX53) += \
 	imx53-ppd.dtb \
 	imx53-qsb.dtb \
 	imx53-qsrb.dtb \
+	imx53-sk-imx53.dtb \
 	imx53-smd.dtb \
 	imx53-tx53-x03x.dtb \
 	imx53-tx53-x13x.dtb \
@@ -418,12 +480,15 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-aristainetos_7.dtb \
 	imx6dl-aristainetos2_4.dtb \
 	imx6dl-aristainetos2_7.dtb \
+	imx6dl-colibri-aster.dtb \
 	imx6dl-colibri-eval-v3.dtb \
-	imx6dl-colibri-v1_1-eval-v3.dtb \
+	imx6dl-colibri-iris.dtb \
+	imx6dl-colibri-iris-v2.dtb \
 	imx6dl-cubox-i.dtb \
 	imx6dl-cubox-i-emmc-som-v15.dtb \
 	imx6dl-cubox-i-som-v15.dtb \
 	imx6dl-dfi-fs700-m60.dtb \
+	imx6dl-dhcom-picoitx.dtb \
 	imx6dl-eckelmann-ci4x10.dtb \
 	imx6dl-emcon-avari.dtb \
 	imx6dl-gw51xx.dtb \
@@ -451,6 +516,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-icore-rqs.dtb \
 	imx6dl-lanmcu.dtb \
 	imx6dl-mamoj.dtb \
+	imx6dl-mba6a.dtb \
+	imx6dl-mba6b.dtb \
 	imx6dl-nit6xlite.dtb \
 	imx6dl-nitrogen6x.dtb \
 	imx6dl-phytec-mira-rdk-nand.dtb \
@@ -470,6 +537,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-sabrelite.dtb \
 	imx6dl-sabresd.dtb \
 	imx6dl-savageboard.dtb \
+	imx6dl-skov-revc-lt2.dtb \
+	imx6dl-skov-revc-lt6.dtb \
+	imx6dl-solidsense.dtb \
 	imx6dl-ts4900.dtb \
 	imx6dl-ts7970.dtb \
 	imx6dl-tx6dl-comtft.dtb \
@@ -491,16 +561,20 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-wandboard-revd1.dtb \
 	imx6dl-yapp4-draco.dtb \
 	imx6dl-yapp4-hydra.dtb \
+	imx6dl-yapp4-lynx.dtb \
 	imx6dl-yapp4-orion.dtb \
+	imx6dl-yapp4-phoenix.dtb \
 	imx6dl-yapp4-ursa.dtb \
 	imx6q-apalis-eval.dtb \
 	imx6q-apalis-ixora.dtb \
 	imx6q-apalis-ixora-v1.1.dtb \
+	imx6q-apalis-ixora-v1.2.dtb \
 	imx6q-apf6dev.dtb \
 	imx6q-arm2.dtb \
 	imx6q-b450v3.dtb \
 	imx6q-b650v3.dtb \
 	imx6q-b850v3.dtb \
+	imx6q-bosch-acc.dtb \
 	imx6q-cm-fx6.dtb \
 	imx6q-cubox-i.dtb \
 	imx6q-cubox-i-emmc-som-v15.dtb \
@@ -510,8 +584,14 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-display5-tianma-tm070-1280x768.dtb \
 	imx6q-dmo-edmqmx6.dtb \
 	imx6q-dms-ba16.dtb \
+	imx6q-ds.dtb \
 	imx6q-emcon-avari.dtb \
 	imx6q-evi.dtb \
+	imx6dl-b105pv2.dtb \
+	imx6dl-b105v2.dtb \
+	imx6dl-b125v2.dtb \
+	imx6dl-b125pv2.dtb \
+	imx6dl-b155v2.dtb \
 	imx6q-gk802.dtb \
 	imx6q-gw51xx.dtb \
 	imx6q-gw52xx.dtb \
@@ -543,6 +623,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-kp-tpc.dtb \
 	imx6q-logicpd.dtb \
 	imx6q-marsboard.dtb \
+	imx6q-mba6a.dtb \
+	imx6q-mba6b.dtb \
 	imx6q-mccmon6.dtb \
 	imx6q-nitrogen6x.dtb \
 	imx6q-nitrogen6_max.dtb \
@@ -564,6 +646,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-sabresd.dtb \
 	imx6q-savageboard.dtb \
 	imx6q-sbc6x.dtb \
+	imx6q-skov-revc-lt2.dtb \
+	imx6q-skov-revc-lt6.dtb \
+	imx6q-skov-reve-mi1010ait-1cp1.dtb \
+	imx6q-solidsense.dtb \
 	imx6q-tbs2910.dtb \
 	imx6q-ts4900.dtb \
 	imx6q-ts7970.dtb \
@@ -583,7 +669,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-wandboard.dtb \
 	imx6q-wandboard-revb1.dtb \
 	imx6q-wandboard-revd1.dtb \
+	imx6q-yapp4-crux.dtb \
+	imx6q-yapp4-pegasus.dtb \
 	imx6q-zii-rdu2.dtb \
+	imx6qp-mba6b.dtb \
 	imx6qp-nitrogen6_max.dtb \
 	imx6qp-nitrogen6_som2.dtb \
 	imx6qp-phytec-mira-rdk-nand.dtb \
@@ -596,15 +685,22 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6qp-tx6qp-8137-mb7.dtb \
 	imx6qp-vicutp.dtb \
 	imx6qp-wandboard-revd1.dtb \
-	imx6qp-zii-rdu2.dtb
+	imx6qp-yapp4-crux-plus.dtb \
+	imx6qp-yapp4-pegasus-plus.dtb \
+	imx6qp-zii-rdu2.dtb \
+	imx6s-dhcom-drc02.dtb
 dtb-$(CONFIG_SOC_IMX6SL) += \
 	imx6sl-evk.dtb \
+	imx6sl-kobo-aura2.dtb \
 	imx6sl-tolino-shine2hd.dtb \
 	imx6sl-tolino-shine3.dtb \
+	imx6sl-tolino-vision.dtb \
+	imx6sl-tolino-vision5.dtb \
 	imx6sl-warp.dtb
 dtb-$(CONFIG_SOC_IMX6SLL) += \
 	imx6sll-evk.dtb \
-	imx6sll-kobo-clarahd.dtb
+	imx6sll-kobo-clarahd.dtb \
+	imx6sll-kobo-librah2o.dtb
 dtb-$(CONFIG_SOC_IMX6SX) += \
 	imx6sx-nitrogen6sx.dtb \
 	imx6sx-sabreauto.dtb \
@@ -623,9 +719,12 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-geam.dtb \
 	imx6ul-isiot-emmc.dtb \
 	imx6ul-isiot-nand.dtb \
-	imx6ul-kontron-n6310-s.dtb \
-	imx6ul-kontron-n6310-s-43.dtb \
+	imx6ul-kontron-bl.dtb \
+	imx6ul-kontron-bl-43.dtb \
 	imx6ul-liteboard.dtb \
+	imx6ul-tqma6ul1-mba6ulx.dtb \
+	imx6ul-tqma6ul2-mba6ulx.dtb \
+	imx6ul-tqma6ul2l-mba6ulx.dtb \
 	imx6ul-opos6uldev.dtb \
 	imx6ul-pico-dwarf.dtb \
 	imx6ul-pico-hobbit.dtb \
@@ -637,20 +736,48 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-tx6ul-0011.dtb \
 	imx6ul-tx6ul-mainboard.dtb \
 	imx6ull-14x14-evk.dtb \
+	imx6ull-colibri-aster.dtb \
+	imx6ull-colibri-emmc-aster.dtb \
+	imx6ull-colibri-emmc-eval-v3.dtb \
+	imx6ull-colibri-emmc-iris.dtb \
+	imx6ull-colibri-emmc-iris-v2.dtb \
 	imx6ull-colibri-eval-v3.dtb \
+	imx6ull-colibri-iris.dtb \
+	imx6ull-colibri-iris-v2.dtb \
+	imx6ull-colibri-wifi-aster.dtb \
 	imx6ull-colibri-wifi-eval-v3.dtb \
+	imx6ull-colibri-wifi-iris.dtb \
+	imx6ull-colibri-wifi-iris-v2.dtb \
+	imx6ull-dhcom-drc02.dtb \
+	imx6ull-dhcom-pdk2.dtb \
+	imx6ull-dhcom-picoitx.dtb \
+	imx6ull-jozacp.dtb \
+	imx6ull-kontron-bl.dtb \
 	imx6ull-myir-mys-6ulx-eval.dtb \
 	imx6ull-opos6uldev.dtb \
 	imx6ull-phytec-segin-ff-rdk-nand.dtb \
 	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
 	imx6ull-phytec-segin-lc-rdk-nand.dtb \
-	imx6ulz-14x14-evk.dtb
+	imx6ull-phytec-tauri-emmc.dtb \
+	imx6ull-phytec-tauri-nand.dtb \
+	imx6ull-tarragon-master.dtb \
+	imx6ull-tarragon-micro.dtb \
+	imx6ull-tarragon-slave.dtb \
+	imx6ull-tarragon-slavext.dtb \
+	imx6ull-tqma6ull2-mba6ulx.dtb \
+	imx6ull-tqma6ull2l-mba6ulx.dtb \
+	imx6ulz-14x14-evk.dtb \
+	imx6ulz-bsh-smm-m2.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-cl-som-imx7.dtb \
 	imx7d-colibri-aster.dtb \
 	imx7d-colibri-emmc-aster.dtb \
+	imx7d-colibri-emmc-iris.dtb \
+	imx7d-colibri-emmc-iris-v2.dtb \
 	imx7d-colibri-emmc-eval-v3.dtb \
 	imx7d-colibri-eval-v3.dtb \
+	imx7d-colibri-iris.dtb \
+	imx7d-colibri-iris-v2.dtb \
 	imx7d-flex-concentrator.dtb \
 	imx7d-flex-concentrator-mfg.dtb \
 	imx7d-mba7.dtb \
@@ -660,20 +787,33 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-pico-hobbit.dtb \
 	imx7d-pico-nymph.dtb \
 	imx7d-pico-pi.dtb \
+	imx7d-remarkable2.dtb \
 	imx7d-sbc-imx7.dtb \
 	imx7d-sdb.dtb \
 	imx7d-sdb-reva.dtb \
 	imx7d-sdb-sht11.dtb \
+	imx7d-smegw01.dtb \
 	imx7d-zii-rmu2.dtb \
 	imx7d-zii-rpu2.dtb \
 	imx7s-colibri-aster.dtb \
 	imx7s-colibri-eval-v3.dtb \
+	imx7s-colibri-iris.dtb \
+	imx7s-colibri-iris-v2.dtb \
 	imx7s-mba7.dtb \
 	imx7s-warp.dtb
 dtb-$(CONFIG_SOC_IMX7ULP) += \
 	imx7ulp-com.dtb \
 	imx7ulp-evk.dtb
+dtb-$(CONFIG_SOC_IMXRT) += \
+	imxrt1050-evk.dtb
+dtb-$(CONFIG_SOC_LAN966) += \
+	lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
+	lan966x-kontron-kswitch-d10-mmt-8g.dtb \
+	lan966x-pcb8290.dtb \
+	lan966x-pcb8291.dtb \
+	lan966x-pcb8309.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
+	ls1021a-iot.dtb \
 	ls1021a-moxa-uc-8410a.dtb \
 	ls1021a-qds.dtb \
 	ls1021a-tsn.dtb \
@@ -721,7 +861,8 @@ dtb-$(CONFIG_ARCH_MXS) += \
 	imx28-m28evk.dtb \
 	imx28-sps1.dtb \
 	imx28-ts4600.dtb \
-	imx28-tx28.dtb
+	imx28-tx28.dtb \
+	imx28-xea.dtb
 dtb-$(CONFIG_ARCH_NOMADIK) += \
 	ste-nomadik-s8815.dtb \
 	ste-nomadik-nhk15.dtb
@@ -743,6 +884,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
+	omap3-beagle-ab4.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-beagle-xm-ab.dtb \
 	omap3-cm-t3517.dtb \
@@ -830,6 +972,8 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-pocketbeagle.dtb \
 	am335x-regor-rdk.dtb \
 	am335x-sancloud-bbe.dtb \
+	am335x-sancloud-bbe-lite.dtb \
+	am335x-sancloud-bbe-extended-wifi.dtb \
 	am335x-shc.dtb \
 	am335x-sbc-t335.dtb \
 	am335x-sl50.dtb \
@@ -859,16 +1003,24 @@ dtb-$(CONFIG_SOC_OMAP5) += \
 	omap5-igep0050.dtb \
 	omap5-sbc-t54.dtb \
 	omap5-uevm.dtb
+am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo
+am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo
 dtb-$(CONFIG_SOC_DRA7XX) += \
 	am57xx-beagle-x15.dtb \
 	am57xx-beagle-x15-revb1.dtb \
 	am57xx-beagle-x15-revc.dtb \
+	am57xx-evm.dtb \
+	am57xx-evm-reva3.dtb \
 	am5729-beagleboneai.dtb \
 	am57xx-cl-som-am57x.dtb \
 	am57xx-sbc-am57x.dtb \
 	am572x-idk.dtb \
+	am572x-idk-touchscreen.dtbo \
 	am571x-idk.dtb \
+	am571x-idk-touchscreen.dtbo \
 	am574x-idk.dtb \
+	am57xx-idk-lcd-osd101t2045.dtbo \
+	am57xx-idk-lcd-osd101t2587.dtbo \
 	dra7-evm.dtb \
 	dra72-evm.dtb \
 	dra72-evm-revc.dtb \
@@ -898,14 +1050,16 @@ dtb-$(CONFIG_ARCH_PXA) += \
 	pxa300-raumfeld-speaker-m.dtb \
 	pxa300-raumfeld-speaker-one.dtb \
 	pxa300-raumfeld-speaker-s.dtb
-dtb-$(CONFIG_ARCH_OXNAS) += \
-	ox810se-wd-mbwe.dtb \
-	ox820-cloudengines-pogoplug-series-3.dtb
 dtb-$(CONFIG_ARCH_QCOM) += \
+	qcom-apq8016-sbc.dtb \
+	qcom-apq8026-asus-sparrow.dtb \
+	qcom-apq8026-huawei-sturgeon.dtb \
+	qcom-apq8026-lg-lenok.dtb \
+	qcom-apq8026-samsung-matisse-wifi.dtb \
 	qcom-apq8060-dragonboard.dtb \
 	qcom-apq8064-cm-qs600.dtb \
 	qcom-apq8064-ifc6410.dtb \
-	qcom-apq8064-sony-xperia-yuga.dtb \
+	qcom-apq8064-sony-xperia-lagan-yuga.dtb \
 	qcom-apq8064-asus-nexus7-flo.dtb \
 	qcom-apq8074-dragonboard.dtb \
 	qcom-apq8084-ifc6540.dtb \
@@ -920,16 +1074,25 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-ipq4019-ap.dk07.1-c2.dtb \
 	qcom-ipq8064-ap148.dtb \
 	qcom-ipq8064-rb3011.dtb \
+	qcom-msm8226-samsung-s3ve3g.dtb \
 	qcom-msm8660-surf.dtb \
+	qcom-msm8916-samsung-e5.dtb \
+	qcom-msm8916-samsung-e7.dtb \
+	qcom-msm8916-samsung-grandmax.dtb \
+	qcom-msm8916-samsung-serranove.dtb \
 	qcom-msm8960-cdp.dtb \
-	qcom-msm8974-fairphone-fp2.dtb \
 	qcom-msm8974-lge-nexus5-hammerhead.dtb \
-	qcom-msm8974-samsung-klte.dtb \
-	qcom-msm8974-sony-xperia-amami.dtb \
-	qcom-msm8974-sony-xperia-castor.dtb \
-	qcom-msm8974-sony-xperia-honami.dtb \
+	qcom-msm8974-sony-xperia-rhine-amami.dtb \
+	qcom-msm8974-sony-xperia-rhine-honami.dtb \
+	qcom-msm8974pro-fairphone-fp2.dtb \
+	qcom-msm8974pro-oneplus-bacon.dtb \
+	qcom-msm8974pro-samsung-klte.dtb \
+	qcom-msm8974pro-sony-xperia-shinano-castor.dtb \
 	qcom-mdm9615-wp8548-mangoh-green.dtb \
-	qcom-sdx55-mtp.dtb
+	qcom-sdx55-mtp.dtb \
+	qcom-sdx55-t55.dtb \
+	qcom-sdx55-telit-fn980-tlb.dtb \
+	qcom-sdx65-mtp.dtb
 dtb-$(CONFIG_ARCH_RDA) += \
 	rda8810pl-orangepi-2g-iot.dtb \
 	rda8810pl-orangepi-i96.dtb
@@ -984,12 +1147,14 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rv1108-elgin-r1.dtb \
 	rv1108-evb.dtb \
+	rv1126-edgeble-neu2-io.dtb \
 	rk3036-evb.dtb \
 	rk3036-kylin.dtb \
 	rk3066a-bqcurie2.dtb \
 	rk3066a-marsboard.dtb \
 	rk3066a-mk808.dtb \
 	rk3066a-rayeager.dtb \
+	rk3128-evb.dtb \
 	rk3188-bqedison2qc.dtb \
 	rk3188-px3-evb.dtb \
 	rk3188-radxarock.dtb \
@@ -1020,8 +1185,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3288-veyron-speedy.dtb \
 	rk3288-veyron-tiger.dtb \
 	rk3288-vyasa.dtb
-dtb-$(CONFIG_ARCH_S3C24XX) += \
-	s3c2416-smdk2416.dtb
 dtb-$(CONFIG_ARCH_S3C64XX) += \
 	s3c6410-mini6410.dtb \
 	s3c6410-smdk6410.dtb
@@ -1033,8 +1196,10 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-smdkc110.dtb \
 	s5pv210-smdkv210.dtb \
 	s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SOCFPGA) += \
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
+	socfpga_arria10_chameleonv3.dtb \
+	socfpga_arria10_mercury_pe1.dtb \
 	socfpga_arria10_socdk_nand.dtb \
 	socfpga_arria10_socdk_qspi.dtb \
 	socfpga_arria10_socdk_sdmmc.dtb \
@@ -1061,7 +1226,8 @@ dtb-$(CONFIG_ARCH_STI) += \
 	stih407-b2120.dtb \
 	stih410-b2120.dtb \
 	stih410-b2260.dtb \
-	stih418-b2199.dtb
+	stih418-b2199.dtb \
+	stih418-b2264.dtb
 dtb-$(CONFIG_ARCH_STM32) += \
 	stm32f429-disco.dtb \
 	stm32f469-disco.dtb \
@@ -1071,17 +1237,34 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32746g-eval.dtb \
 	stm32h743i-eval.dtb \
 	stm32h743i-disco.dtb \
+	stm32h750i-art-pi.dtb \
+	stm32mp135f-dk.dtb \
+	stm32mp151a-prtt1a.dtb \
+	stm32mp151a-prtt1c.dtb \
+	stm32mp151a-prtt1s.dtb \
+	stm32mp151a-dhcor-testbench.dtb \
 	stm32mp153c-dhcom-drc02.dtb \
+	stm32mp153c-dhcor-drc-compact.dtb \
 	stm32mp157a-avenger96.dtb \
 	stm32mp157a-dhcor-avenger96.dtb \
 	stm32mp157a-dk1.dtb \
+	stm32mp157a-dk1-scmi.dtb \
 	stm32mp157a-iot-box.dtb \
+	stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
+	stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
+	stm32mp157a-icore-stm32mp1-ctouch2.dtb \
+	stm32mp157a-icore-stm32mp1-ctouch2-of10.dtb \
+	stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
 	stm32mp157a-stinger96.dtb \
 	stm32mp157c-dhcom-pdk2.dtb \
 	stm32mp157c-dhcom-picoitx.dtb \
 	stm32mp157c-dk2.dtb \
+	stm32mp157c-dk2-scmi.dtb \
 	stm32mp157c-ed1.dtb \
+	stm32mp157c-ed1-scmi.dtb \
+	stm32mp157c-emsbc-argon.dtb \
 	stm32mp157c-ev1.dtb \
+	stm32mp157c-ev1-scmi.dtb \
 	stm32mp157c-lxa-mc1.dtb \
 	stm32mp157c-odyssey.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
@@ -1105,7 +1288,8 @@ dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-olinuxino-lime.dtb \
 	sun4i-a10-pcduino.dtb \
 	sun4i-a10-pcduino2.dtb \
-	sun4i-a10-pov-protab2-ips9.dtb
+	sun4i-a10-pov-protab2-ips9.dtb \
+	sun4i-a10-topwise-a721.dtb
 dtb-$(CONFIG_MACH_SUN5I) += \
 	sun5i-a10s-auxtek-t003.dtb \
 	sun5i-a10s-auxtek-t004.dtb \
@@ -1147,6 +1331,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-bananapro.dtb \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
 	sun7i-a20-hummingbird.dtb \
 	sun7i-a20-itead-ibox.dtb \
 	sun7i-a20-i12-tvbox.dtb \
@@ -1222,9 +1407,11 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-r16-nintendo-super-nes-classic.dtb \
 	sun8i-r16-parrot.dtb \
 	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-r40-oka40i-c.dtb \
 	sun8i-s3-elimo-initium.dtb \
 	sun8i-s3-lichee-zero-plus.dtb \
 	sun8i-s3-pinecube.dtb \
+	sun8i-t113s-mangopi-mq-r-t113.dtb \
 	sun8i-t3-cqa3t-bv3.dtb \
 	sun8i-v3-sl631-imx179.dtb \
 	sun8i-v3s-licheepi-zero.dtb \
@@ -1234,9 +1421,12 @@ dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb
 dtb-$(CONFIG_MACH_SUNIV) += \
-	suniv-f1c100s-licheepi-nano.dtb
+	suniv-f1c100s-licheepi-nano.dtb \
+	suniv-f1c200s-lctech-pi.dtb \
+	suniv-f1c200s-popstick-v1.1.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
 	tegra20-acer-a500-picasso.dtb \
+	tegra20-asus-tf101.dtb \
 	tegra20-harmony.dtb \
 	tegra20-colibri-eval-v3.dtb \
 	tegra20-colibri-iris.dtb \
@@ -1253,12 +1443,18 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
 	tegra30-asus-nexus7-grouper-PM269.dtb \
 	tegra30-asus-nexus7-grouper-E1565.dtb \
 	tegra30-asus-nexus7-tilapia-E1565.dtb \
+	tegra30-asus-tf201.dtb \
+	tegra30-asus-tf300t.dtb \
+	tegra30-asus-tf300tg.dtb \
+	tegra30-asus-tf700t.dtb \
 	tegra30-beaver.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
 	tegra30-colibri-eval-v3.dtb \
-	tegra30-ouya.dtb
+	tegra30-ouya.dtb \
+	tegra30-pegatron-chagall.dtb
 dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
+	tegra114-asus-tf701t.dtb \
 	tegra114-dalmore.dtb \
 	tegra114-roth.dtb \
 	tegra114-tn7.dtb
@@ -1267,6 +1463,7 @@ dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
 	tegra124-apalis-v1.2-eval.dtb \
 	tegra124-jetson-tk1.dtb \
 	tegra124-nyan-big.dtb \
+	tegra124-nyan-big-fhd.dtb \
 	tegra124-nyan-blaze.dtb \
 	tegra124-venice2.dtb
 dtb-$(CONFIG_ARCH_U8500) += \
@@ -1278,13 +1475,19 @@ dtb-$(CONFIG_ARCH_U8500) += \
 	ste-href520-tvk.dtb \
 	ste-ux500-samsung-golden.dtb \
 	ste-ux500-samsung-janice.dtb \
-	ste-ux500-samsung-skomer.dtb
+	ste-ux500-samsung-gavini.dtb \
+	ste-ux500-samsung-codina.dtb \
+	ste-ux500-samsung-codina-tmo.dtb \
+	ste-ux500-samsung-skomer.dtb \
+	ste-ux500-samsung-kyle.dtb
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
 	uniphier-ld4-ref.dtb \
 	uniphier-ld6b-ref.dtb \
 	uniphier-pro4-ace.dtb \
 	uniphier-pro4-ref.dtb \
 	uniphier-pro4-sanji.dtb \
+	uniphier-pro5-epcore.dtb \
+	uniphier-pro5-proex.dtb \
 	uniphier-pxs2-gentil.dtb \
 	uniphier-pxs2-vodka.dtb \
 	uniphier-sld8-ref.dtb
@@ -1322,6 +1525,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-zybo.dtb \
 	zynq-zybo-z7.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \
+	armada-370-c200-v2.dtb \
 	armada-370-db.dtb \
 	armada-370-dlink-dns327l.dtb \
 	armada-370-mirabox.dtb \
@@ -1336,7 +1540,9 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
 dtb-$(CONFIG_MACH_ARMADA_375) += \
 	armada-375-db.dtb
 dtb-$(CONFIG_MACH_ARMADA_38X) += \
+	armada-381-netgear-gs110emx.dtb \
 	armada-382-rd-ac3x-48g4x2xl.dtb \
+	armada-385-atl-x530.dtb\
 	armada-385-clearfog-gtr-s4.dtb \
 	armada-385-clearfog-gtr-l8.dtb \
 	armada-385-db-88f6820-amc.dtb \
@@ -1385,6 +1591,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt2701-evb.dtb \
 	mt6580-evbp1.dtb \
 	mt6589-aquaris5.dtb \
+	mt6589-fairphone-fp1.dtb \
 	mt6592-evb.dtb \
 	mt7623a-rfb-emmc.dtb \
 	mt7623a-rfb-nand.dtb \
@@ -1396,19 +1603,33 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
 dtb-$(CONFIG_ARCH_MSTARV7) += \
 	mstar-infinity-msc313-breadbee_crust.dtb \
+	mstar-infinity2m-ssd202d-100ask-dongshanpione.dtb \
+	mstar-infinity2m-ssd202d-miyoo-mini.dtb \
+	mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dtb \
 	mstar-infinity2m-ssd202d-ssd201htv2.dtb \
+	mstar-infinity2m-ssd202d-unitv2.dtb \
 	mstar-infinity3-msc313e-breadbee.dtb \
 	mstar-mercury5-ssc8336n-midrived08.dtb
 dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-ast2500-evb.dtb \
+	aspeed-ast2600-evb-a1.dtb \
 	aspeed-ast2600-evb.dtb \
+	aspeed-bmc-amd-daytonax.dtb \
 	aspeed-bmc-amd-ethanolx.dtb \
 	aspeed-bmc-ampere-mtjade.dtb \
-	aspeed-bmc-arm-centriq2400-rep.dtb \
+	aspeed-bmc-ampere-mtmitchell.dtb \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
+	aspeed-bmc-asrock-e3c246d4i.dtb \
+	aspeed-bmc-asrock-romed8hm3.dtb \
 	aspeed-bmc-bytedance-g220a.dtb \
+	aspeed-bmc-delta-ahe50dc.dtb \
+	aspeed-bmc-facebook-bletchley.dtb \
+	aspeed-bmc-facebook-cloudripper.dtb \
 	aspeed-bmc-facebook-cmm.dtb \
+	aspeed-bmc-facebook-elbert.dtb \
+	aspeed-bmc-facebook-fuji.dtb \
 	aspeed-bmc-facebook-galaxy100.dtb \
+	aspeed-bmc-facebook-greatlakes.dtb \
 	aspeed-bmc-facebook-minipack.dtb \
 	aspeed-bmc-facebook-tiogapass.dtb \
 	aspeed-bmc-facebook-wedge40.dtb \
@@ -1416,16 +1637,18 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-facebook-wedge400.dtb \
 	aspeed-bmc-facebook-yamp.dtb \
 	aspeed-bmc-facebook-yosemitev2.dtb \
+	aspeed-bmc-ibm-bonnell.dtb \
 	aspeed-bmc-ibm-everest.dtb \
 	aspeed-bmc-ibm-rainier.dtb \
+	aspeed-bmc-ibm-rainier-1s4u.dtb \
 	aspeed-bmc-ibm-rainier-4u.dtb \
 	aspeed-bmc-intel-s2600wf.dtb \
 	aspeed-bmc-inspur-fp5280g2.dtb \
+	aspeed-bmc-inspur-nf5280m6.dtb \
 	aspeed-bmc-lenovo-hr630.dtb \
 	aspeed-bmc-lenovo-hr855xg2.dtb \
 	aspeed-bmc-microsoft-olympus.dtb \
 	aspeed-bmc-opp-lanyang.dtb \
-	aspeed-bmc-opp-mihawk.dtb \
 	aspeed-bmc-opp-mowgli.dtb \
 	aspeed-bmc-opp-nicole.dtb \
 	aspeed-bmc-opp-palmetto.dtb \
@@ -1436,5 +1659,14 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-opp-witherspoon.dtb \
 	aspeed-bmc-opp-zaius.dtb \
 	aspeed-bmc-portwell-neptune.dtb \
+	aspeed-bmc-qcom-dc-scm-v1.dtb \
 	aspeed-bmc-quanta-q71l.dtb \
-	aspeed-bmc-supermicro-x11spi.dtb
+	aspeed-bmc-quanta-s6q.dtb \
+	aspeed-bmc-supermicro-x11spi.dtb \
+	aspeed-bmc-inventec-transformers.dtb \
+	aspeed-bmc-tyan-s7106.dtb \
+	aspeed-bmc-tyan-s8036.dtb \
+	aspeed-bmc-ufispace-ncplite.dtb \
+	aspeed-bmc-vegman-n110.dtb \
+	aspeed-bmc-vegman-rx20.dtb \
+	aspeed-bmc-vegman-sx20.dtb
diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi
index 3b0675a1c460..ff68dfb4eb78 100644
--- a/arch/arm/boot/dts/alpine.dtsi
+++ b/arch/arm/boot/dts/alpine.dtsi
@@ -126,7 +126,7 @@
 				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		uart0: uart@fd883000 {
+		uart0: serial@fd883000 {
 			compatible = "ns16550a";
 			reg = <0x0 0xfd883000 0x0 0x1000>;
 			clock-frequency = <375000000>;
@@ -135,7 +135,7 @@
 			reg-io-width = <4>;
 		};
 
-		uart1: uart@fd884000 {
+		uart1: serial@fd884000 {
 			compatible = "ns16550a";
 			reg = <0x0 0xfd884000 0x0 0x1000>;
 			clock-frequency = <375000000>;
@@ -154,7 +154,7 @@
 			reg = <0x0 0xfbc00000 0x0 0x100000>;
 			interrupt-map-mask = <0xf800 0 0 7>;
 			/* Add legacy interrupts for SATA devices only */
-			interrupt-map =	<0x4000 0 0 1 &gic 0 43 4>,
+			interrupt-map = <0x4000 0 0 1 &gic 0 43 4>,
 					<0x4800 0 0 1 &gic 0 44 4>;
 
 			/* 32 bit non prefetchable memory space */
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
index 56915b6d818d..75992eec830f 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -58,21 +58,21 @@
 	dr_mode = "host";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@0 {
 		reg = <1>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	phy-handle = <&phy0>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
 
@@ -81,3 +81,147 @@
 	pinctrl-0 = <&mmc1_pins>;
 	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 };
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"NC",
+		"NC",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"RMII1_TXD1",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"RMII1_TXD0",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"NC",
+		"NC",
+		"NC",
+		"SD_CD",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"RMII1_RXD1",
+		"RMII1_RXD0",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"RMII1_CRS_DV",
+		"RMII1_RXER",
+		"RMII1_TXEN",
+		"NC",
+		"NC",
+		"NC",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"ModeA0",
+		"ModeA1",
+		"ModeA2",
+		"ModeA3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
index d8d60398d803..087e084506d2 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -91,6 +91,10 @@
 		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tca6416_pins>;
+		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+				  "ModeA0", "ModeA1", "ModeA2", "ModeA3",
+				  "ModeB0", "ModeB1", "ModeB2", "ModeB3";
 	};
 };
 
@@ -103,18 +107,18 @@
 	dr_mode = "host";
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	fixed-link {
 		speed = <100>;
 		full-duplex;
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
 
@@ -123,3 +127,147 @@
 	pinctrl-0 = <&mmc1_pins>;
 	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
 };
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"UART2_RX",
+		"UART2_TX",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"WLAN_BTN",
+		"W_DISABLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"TCA6416_INT",
+		"RMII1_TXD1",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"RMII1_TXD0",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"UART2_DTR",
+		"UART2_DSR",
+		"UART2_DCD",
+		"UART2_RI",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SD_CD",
+		"SD_WP",
+		"RMII1_RXD1",
+		"RMII1_RXD0",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"RMII1_CRS_DV",
+		"RMII1_RXER",
+		"RMII1_TXEN",
+		"3G_PWR_EN",
+		"UART2_CTSN",
+		"UART2_RTSN",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"USB1_DRVVBUS",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 8096d459b93f..faeb39aab60a 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -99,6 +99,10 @@
 		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tca6416_pins>;
+		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+				  "ModeA0", "ModeA1", "ModeA2", "ModeA3",
+				  "ModeB0", "ModeB1", "ModeB2", "ModeB3";
 	};
 };
 
@@ -120,18 +124,18 @@
 	dr_mode = "host";
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	fixed-link {
 		speed = <100>;
 		full-duplex;
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
 
@@ -147,3 +151,147 @@
 	pinctrl-0 = <&mmc1_pins>;
 	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
 };
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"UART2_RX",
+		"UART2_TX",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"WLAN_BTN",
+		"W_DISABLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"TCA6416_INT",
+		"RMII1_TXD1",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"RMII1_TXD0",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"DCAN1_TX",
+		"DCAN1_RX",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"UART2_DTR",
+		"UART2_DSR",
+		"UART2_DCD",
+		"UART2_RI",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SD_CD",
+		"SD_WP",
+		"RMII1_RXD1",
+		"RMII1_RXD0",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"RMII1_CRS_DV",
+		"RMII1_RXER",
+		"RMII1_TXEN",
+		"3G_PWR_EN",
+		"UART2_CTSN",
+		"UART2_RTSN",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"USB1_DRVVBUS",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
index 9a79f727baf6..025014657d12 100644
--- a/arch/arm/boot/dts/am335x-baltos-leds.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
@@ -17,18 +17,18 @@
 
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "onrisc:red:power";
 			linux,default-trigger = "default-on";
 			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
-		wlan {
+		led-wlan {
 			label = "onrisc:blue:wlan";
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		app {
+		led-app {
 			label = "onrisc:green:app";
 			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index 3ea286180382..6161c8929a78 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -197,7 +197,7 @@
 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
-		ti,nand-xfer-type = "polled";
+		ti,nand-xfer-type = "prefetch-dma";
 
 		gpmc,device-nand = "true";
 		gpmc,device-width = <1>;
@@ -285,7 +285,7 @@
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
+			regulator-max-microvolt = <1351500>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
@@ -339,16 +339,15 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
 
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	status = "okay";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
@@ -393,10 +392,10 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
-&gpio3 {
+&gpio3_target {
 	ti,no-reset-on-init;
 };
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 2d51d4bba6d4..02e04a12a270 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -353,24 +353,27 @@
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
+	ti,dual-emac-pvid = <1>;
 };
 
-&mac {
-	slaves = <1>;
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
@@ -396,4 +399,13 @@
 &rtc {
 	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 	clock-names = "ext-clk", "int-clk";
+	system-power-controller;
+};
+
+&pruss_tm {
+	status = "okay";
+};
+
+&wkup_m3_ipc {
+	firmware-name = "am335x-bone-scale-data.bin";
 };
diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
index 64c3e9269f40..a7a8c61ef9b2 100644
--- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi
+++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
@@ -3,9 +3,6 @@
  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
-#include <dt-bindings/display/tda998x.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
 &ldo3_reg {
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
@@ -25,145 +22,9 @@
 	non-removable;
 };
 
-&am33xx_pinmux {
-	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
-		>;
-	};
-
-	mcasp0_pins: mcasp0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
-		>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-
-	/* If you want to get 24 bit RGB and 16 BGR mode instead of
-	 * current 16 bit RGB and 24 BGR modes, set the propety
-	 * below to "crossed" and uncomment the video-ports -property
-	 * in tda19988 node.
-	 */
-	blue-and-red-wiring = "straight";
-
-	port {
-		lcdc_0: endpoint@0 {
-			remote-endpoint = <&hdmi_0>;
-		};
-	};
-};
-
-&i2c0 {
-	tda19988: tda19988@70 {
-		compatible = "nxp,tda998x";
-		reg = <0x70>;
-		nxp,calib-gpios = <&gpio1 25 0>;
-		interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default", "off";
-		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
-		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
-
-		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
-		/* video-ports = <0x234501>; */
-
-		#sound-dai-cells = <0>;
-		audio-ports = <	TDA998x_I2S	0x03>;
-
-		ports {
-			port@0 {
-				hdmi_0: endpoint@0 {
-					remote-endpoint = <&lcdc_0>;
-				};
-			};
-		};
-	};
-};
-
-&rtc {
-	system-power-controller;
-};
-
-&mcasp0	{
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp0_pins>;
-	status = "okay";
-	op-mode = <0>;	/* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 0
-		>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
 / {
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
-
-	clk_mcasp0_fixed: clk_mcasp0_fixed {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24576000>;
-	};
-
-	clk_mcasp0: clk_mcasp0 {
-		#clock-cells = <0>;
-		compatible = "gpio-gate-clock";
-		clocks = <&clk_mcasp0_fixed>;
-		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "TI BeagleBone Black";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink0_master>;
-		simple-audio-card,frame-master = <&dailink0_master>;
-
-		dailink0_master: simple-audio-card,cpu {
-			sound-dai = <&mcasp0>;
-			clocks = <&clk_mcasp0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&tda19988>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi b/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi
new file mode 100644
index 000000000000..486f24deb875
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/display/tda998x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&am33xx_pinmux {
+	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+		>;
+	};
+
+	mcasp0_pins: mcasp0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+
+	/* If you want to get 24 bit RGB and 16 BGR mode instead of
+	 * current 16 bit RGB and 24 BGR modes, set the propety
+	 * below to "crossed" and uncomment the video-ports -property
+	 * in tda19988 node.
+	 */
+	blue-and-red-wiring = "straight";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&hdmi_0>;
+		};
+	};
+};
+
+&i2c0 {
+	tda19988: tda19988@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+		nxp,calib-gpios = <&gpio1 25 0>;
+		interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+
+		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
+		/* video-ports = <0x234501>; */
+
+		#sound-dai-cells = <0>;
+		audio-ports = <	TDA998x_I2S	0x03>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hdmi_0: endpoint {
+					remote-endpoint = <&lcdc_0>;
+				};
+			};
+		};
+	};
+};
+
+&mcasp0	{
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 0
+		>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+/ {
+	clk_mcasp0_fixed: clk_mcasp0_fixed {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24576000>;
+	};
+
+	clk_mcasp0: clk_mcasp0 {
+		#clock-cells = <0>;
+		compatible = "gpio-gate-clock";
+		clocks = <&clk_mcasp0_fixed>;
+		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "TI BeagleBone Black";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+
+		dailink0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			clocks = <&clk_mcasp0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tda19988>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
index 86cad9912906..207d2b63e0eb 100644
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -7,6 +7,7 @@
 #include "am33xx.dtsi"
 #include "am335x-bone-common.dtsi"
 #include "am335x-boneblack-common.dtsi"
+#include "am335x-boneblack-hdmi.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -18,7 +19,7 @@
 		regulator-name = "wlan-en-regulator";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		startup-delay-us= <70000>;
+		startup-delay-us = <70000>;
 
 		/* WL_EN */
 		gpio = <&gpio3 9 0>;
@@ -62,7 +63,7 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	status = "disabled";
 };
 
@@ -101,7 +102,7 @@
 };
 
 &gpio3 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index b4feb85e171a..b956e2f60fe0 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -7,6 +7,7 @@
 #include "am33xx.dtsi"
 #include "am335x-bone-common.dtsi"
 #include "am335x-boneblack-common.dtsi"
+#include "am335x-boneblack-hdmi.dtsi"
 
 / {
 	model = "TI AM335x BeagleBone Black";
@@ -26,54 +27,54 @@
 
 &gpio0 {
 	gpio-line-names =
-		"[ethernet]",
-		"[ethernet]",
+		"[mdio_data]",
+		"[mdio_clk]",
 		"P9_22 [spi0_sclk]",
 		"P9_21 [spi0_d0]",
 		"P9_18 [spi0_d1]",
 		"P9_17 [spi0_cs0]",
-		"[sd card]",
-		"P9_42A [ecappwm0]",
-		"P8_35 [hdmi]",
-		"P8_33 [hdmi]",
-		"P8_31 [hdmi]",
-		"P8_32 [hdmi]",
+		"[mmc0_cd]",
+		"P8_42A [ecappwm0]",
+		"P8_35 [lcd d12]",
+		"P8_33 [lcd d13]",
+		"P8_31 [lcd d14]",
+		"P8_32 [lcd d15]",
 		"P9_20 [i2c2_sda]",
 		"P9_19 [i2c2_scl]",
 		"P9_26 [uart1_rxd]",
 		"P9_24 [uart1_txd]",
-		"[ethernet]",
-		"[ethernet]",
-		"[usb]",
-		"[hdmi]",
+		"[rmii1_txd3]",
+		"[rmii1_txd2]",
+		"[usb0_drvvbus]",
+		"[hdmi cec]",
 		"P9_41B",
-		"[ethernet]",
+		"[rmii1_txd1]",
 		"P8_19 [ehrpwm2a]",
 		"P8_13 [ehrpwm2b]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P8_14",
 		"P8_17",
-		"[ethernet]",
-		"[ethernet]",
+		"[rmii1_txd0]",
+		"[rmii1_refclk]",
 		"P9_11 [uart4_rxd]",
 		"P9_13 [uart4_txd]";
 };
 
 &gpio1 {
 	gpio-line-names =
-		"P8_25 [emmc]",
-		"[emmc]",
-		"P8_5 [emmc]",
-		"P8_6 [emmc]",
-		"P8_23 [emmc]",
-		"P8_22 [emmc]",
-		"P8_3 [emmc]",
-		"P8_4 [emmc]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"P8_25 [mmc1_dat0]",
+		"[mmc1_dat1]",
+		"P8_5 [mmc1_dat2]",
+		"P8_6 [mmc1_dat3]",
+		"P8_23 [mmc1_dat4]",
+		"P8_22 [mmc1_dat5]",
+		"P8_3 [mmc1_dat6]",
+		"P8_4 [mmc1_dat7]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
 		"P8_12",
 		"P8_11",
 		"P8_16",
@@ -82,13 +83,13 @@
 		"P9_23",
 		"P9_14 [ehrpwm1a]",
 		"P9_16 [ehrpwm1b]",
-		"[emmc]",
+		"[emmc rst]",
 		"[usr0 led]",
 		"[usr1 led]",
 		"[usr2 led]",
 		"[usr3 led]",
-		"[hdmi]",
-		"[usb]",
+		"[hdmi irq]",
+		"[usb vbus oc]",
 		"[hdmi audio]",
 		"P9_12",
 		"P8_26",
@@ -116,38 +117,38 @@
 		"P8_38 [hdmi]",
 		"P8_36 [hdmi]",
 		"P8_34 [hdmi]",
-		"[ethernet]",
-		"[ethernet]",
-		"[ethernet]",
-		"[ethernet]",
+		"[rmii1_rxd3]",
+		"[rmii1_rxd2]",
+		"[rmii1_rxd1]",
+		"[rmii1_rxd0]",
 		"P8_27 [hdmi]",
 		"P8_29 [hdmi]",
 		"P8_28 [hdmi]",
 		"P8_30 [hdmi]",
-		"[emmc]",
-		"[emmc]",
-		"[emmc]",
-		"[emmc]",
-		"[emmc]",
-		"[emmc]";
+		"[mmc0_dat3]",
+		"[mmc0_dat2]",
+		"[mmc0_dat1]",
+		"[mmc0_dat0]",
+		"[mmc0_clk]",
+		"[mmc0_cmd]";
 };
 
 &gpio3 {
 	gpio-line-names =
-		"[ethernet]",
-		"[ethernet]",
-		"[ethernet]",
-		"[ethernet]",
-		"[ethernet]",
-		"[i2c0]",
-		"[i2c0]",
-		"[emu]",
-		"[emu]",
-		"[ethernet]",
-		"[ethernet]",
-		"[NC]",
-		"[NC]",
-		"[usb]",
+		"[mii col]",
+		"[mii crs]",
+		"[mii rx err]",
+		"[mii tx en]",
+		"[mii rx dv]",
+		"[i2c0 sda]",
+		"[i2c0 scl]",
+		"[jtag emu0]",
+		"[jtag emu1]",
+		"[mii tx clk]",
+		"[mii rx clk]",
+		"NC",
+		"NC",
+		"[usb vbus en]",
 		"P9_31 [spi1_sclk]",
 		"P9_29 [spi1_d0]",
 		"P9_30 [spi1_d1]",
@@ -156,14 +157,18 @@
 		"P9_27",
 		"P9_41A",
 		"P9_25",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]";
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
+
+&baseboard_eeprom {
+	vcc-supply = <&ldo4_reg>;
 };
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index 69acaf4ea0f3..34579e98636e 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -106,7 +106,7 @@
 		regulator-name = "wlan-en-regulator";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		startup-delay-us= <70000>;
+		startup-delay-us = <70000>;
 
 		/* WL_EN */
 		gpio = <&gpio3 9 0>;
@@ -341,7 +341,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ax8975@c {
-				compatible = "ak,ak8975";
+				compatible = "asahi-kasei,ak8975";
 				reg = <0x0c>;
 			};
 		};
@@ -435,12 +435,153 @@
 	status = "okay";
 };
 
+&gpio0 {
+	gpio-line-names =
+		"UART3_CTS", /* M17 */
+		"UART3_RTS", /* M18 */
+		"UART2_RX", /* A17 */
+		"UART2_TX", /* B17 */
+		"I2C1_SDA", /* B16 */
+		"I2C1_SCL", /* A16 */
+		"MMC0_CD", /* C15 */
+		"SPI1_SS2", /* C18 */
+		"EQEP_1A", /* V2 */
+		"EQEP_1B", /* V3 */
+		"MDIR_2B", /* V4 */
+		"BATT_LED_2", /* T5 */
+		"I2C2_SDA", /* D18 */
+		"I2C2_SCL", /* D17 */
+		"UART1_RX", /* D16 */
+		"UART1_TX", /* D15 */
+		"MMC2_DAT1", /* J18 */
+		"MMC2_DAT2", /* K15 */
+		"NC", /* F16 */
+		"WIFI_LED", /* A15 */
+		"MOT_STBY", /* D14 */
+		"WLAN_IRQ", /* K16 */
+		"PWM_2A", /* U10 */
+		"PWM_2B", /* T10 */
+		"",
+		"",
+		"BATT_LED_4", /* T11 */
+		"BATT_LED_1", /* U12 */
+		"BT_EN", /* K17 */
+		"SPI1_SS1", /* H18 */
+		"UART4_RX", /* T17 */
+		"MDIR_1B"; /* U17 */
+};
+
+&gpio1 {
+	gpio-line-names =
+		"MMC1_DAT0", /* U7 */
+		"MMC1_DAT1", /* V7 */
+		"MMC1_DAT2", /* R8 */
+		"MMC1_DAT3", /* T8 */
+		"MMC1_DAT4", /* U8 */
+		"MMC1_DAT5", /* V8 */
+		"MMC1_DAT6", /* R9 */
+		"MMC1_DAT7", /* T9 */
+		"DCAN1_TX", /* E18 */
+		"DCAN1_RX", /* E17 */
+		"UART0_RX", /* E15 */
+		"UART0_TX", /* E16 */
+		"EQEP_2A", /* T12 */
+		"EQEP_2B", /* R12 */
+		"PRU_E_A", /* V13 */
+		"PRU_E_B", /* U13 */
+		"MDIR_2A", /* R13 */
+		"GPIO1_17", /* V14 */
+		"PWM_1A", /* U14 */
+		"PWM_1B", /* T14 */
+		"EMMC_RST", /* R14 */
+		"USR_LED_0", /* V15 */
+		"USR_LED_1", /* U15 */
+		"USR_LED_2", /* T15 */
+		"USR_LED_3", /* V16 */
+		"GPIO1_25", /* U16 */
+		"MCASP0_AXR0", /* T16 */
+		"MCASP0_AXR1", /* V17 */
+		"MCASP0_ACLKR", /* U18 */
+		"BATT_LED_3", /* V6 */
+		"MMC1_CLK", /* U9 */
+		"MMC1_CMD"; /* V9 */
+};
+
+&gpio2 {
+	gpio-line-names =
+		"MDIR_1A", /* T13 */
+		"MCASP0_FSR", /* V12 */
+		"LED_RED", /* R7 */
+		"LED_GREEN", /* T7 */
+		"MODE_BTN", /* U6 */
+		"PAUSE_BTN", /* T6 */
+		"MDIR_4A", /* R1 */
+		"MDIR_4B", /* R2 */
+		"MDIR_3B", /* R3 */
+		"MDIR_3A", /* R4 */
+		"SVO7", /* T1 */
+		"SVO8", /* T2 */
+		"SVO5", /* T3 */
+		"SVO6", /* T4 */
+		"UART5_TX", /* U1 */
+		"UART5_RX", /* U2 */
+		"SERVO_EN", /* U3 */
+		"NC", /* U4 */
+		"UART3_RX", /* L17 */
+		"UART3_TX", /* L16 */
+		"MMC2_CLK", /* L15 */
+		"DCAN1_SILENT", /* M16 */
+		"SVO1", /* U5 */
+		"SVO3", /* R5 */
+		"SVO2", /* V5 */
+		"SVO4", /* R6 */
+		"MMC0_DAT3", /* F17 */
+		"MMC0_DAT2", /* F18 */
+		"MMC0_DAT1", /* G15 */
+		"MMC0_DAT0", /* G16 */
+		"MMC0_CLK", /* G17 */
+		"MMC0_CMD"; /* G18 */
+};
+
 &gpio3 {
-	ls_buf_en {
+	gpio-line-names =
+		"MMC2_DAT3", /* H16 */
+		"GPIO3_1", /* H17 */
+		"GPIO3_2", /* J15 */
+		"MMC2_CMD", /* J16 */
+		"MMC2_DAT0", /* J17 */
+		"I2C0_SDA", /* C17 */
+		"I2C0_SCL", /* C16 */
+		"EMU1", /* C14 */
+		"EMU0", /* B14 */
+		"WL_EN", /* K18 */
+		"WL_BT_OE", /* L18 */
+		"",
+		"",
+		"NC", /* F15 */
+		"SPI1_SCK", /* A13 */
+		"SPI1_MISO", /* B13 */
+		"SPI1_MOSI", /* D12 */
+		"GPIO3_17", /* C12 */
+		"EQEP_0A", /* B12 */
+		"EQEP_0B", /* C13 */
+		"GPIO3_20", /* D13 */
+		"IMU_INT", /* A14 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
-		line-name = "LS_BUF_EN";
 	};
 };
 
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
index 7615327d906a..d388cffa1a4d 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -18,7 +18,7 @@
 		regulator-name = "wlan-en-regulator";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		startup-delay-us= <70000>;
+		startup-delay-us = <70000>;
 
 		/* WL_EN */
 		gpio = <&gpio0 26 0>;
@@ -62,7 +62,7 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	status = "disabled";
 };
 
@@ -101,7 +101,7 @@
 };
 
 &gpio1 {
-	ls_buf_en {
+	ls-buf-en-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -118,7 +118,7 @@
 /* an external pulldown on U21 pin 4.                                  */
 
 &gpio3 {
-	bt_aud_in {
+	bt-aud-in-hog {
 		gpio-hog;
 		gpios = <16 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index 5660b5f6942d..a223cdd3e30e 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -128,28 +128,31 @@
 };
 
 /* Ethernet */
-&mac {
-	slaves = <1>;
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
 };
 
 /* USB */
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index 36d963db4026..993b13420699 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -325,7 +325,7 @@ status = "okay";
 	tlv320aic23: codec@1a {
 		compatible = "ti,tlv320aic23";
 		reg = <0x1a>;
-		#sound-dai-cells= <0>;
+		#sound-dai-cells = <0>;
 		status = "okay";
 	};
 };
@@ -333,7 +333,7 @@ status = "okay";
 &epwmss0 {
 	status = "okay";
 
-	ecap0: ecap@100 {
+	ecap0: pwm@100 {
 		status = "okay";
 		pinctrl-names = "default";
 		pinctrl-0 = <&ecap0_pins>;
@@ -413,28 +413,31 @@ status = "okay";
 	status = "okay";
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-	slaves = <1>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
 };
 
 &mmc1 {
@@ -488,7 +491,7 @@ status = "okay";
 		tx-num-evt = <1>;
 		rx-num-evt = <1>;
 
-		#sound-dai-cells= <0>;
+		#sound-dai-cells = <0>;
 		status = "okay";
 };
 
@@ -496,7 +499,7 @@ status = "okay";
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
-	ti,pindir-d0-out-d1-in = <1>;
+	ti,pindir-d0-out-d1-in;
 	/* WLS1271 WiFi */
 	wlcore: wlcore@1 {
 		compatible = "ti,wl1271";
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 902e295b309e..5beabaa5ff6a 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -92,20 +92,18 @@
 				0x0201006c>;	/* DOWN */
 	};
 
-	gpio_keys: volume_keys0 {
+	gpio_keys: volume-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
-		switch9 {
+		switch-9 {
 			label = "volume-up";
 			linux,code = <115>;
 			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 		};
 
-		switch10 {
+		switch-10 {
 			label = "volume-down";
 			linux,code = <114>;
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
@@ -128,7 +126,7 @@
 		backlight = <&backlight>;
 
 		port {
-			panel_0: endpoint@0 {
+			panel_0: endpoint {
 				remote-endpoint = <&lcdc_0>;
 			};
 		};
@@ -495,7 +493,7 @@
 &epwmss0 {
 	status = "okay";
 
-	ecap0: ecap@100 {
+	ecap0: pwm@100 {
 		status = "okay";
 		pinctrl-names = "default";
 		pinctrl-0 = <&ecap0_pins>;
@@ -546,7 +544,7 @@
 		#size-cells = <1>;
 		partition@0 {
 			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
+			reg = <0x00000000 0x00020000>;
 		};
 		partition@1 {
 			label = "NAND.SPL.backup1";
@@ -778,3 +776,11 @@
 	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 	clock-names = "ext-clk", "int-clk";
 };
+
+&pruss_tm {
+	status = "okay";
+};
+
+&wkup_m3_ipc {
+	firmware-name = "am335x-evm-scale-data.bin";
+};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index d5f8d5e2eb5d..5b3278c0c46a 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -191,7 +191,7 @@
 		backlight = <&lcd_bl>;
 
 		port {
-			panel_0: endpoint@0 {
+			panel_0: endpoint {
 				remote-endpoint = <&lcdc_0>;
 			};
 		};
@@ -510,7 +510,7 @@
 &epwmss2 {
 	status = "okay";
 
-	ecap2: ecap@100 {
+	ecap2: pwm@100 {
 		status = "okay";
 		pinctrl-names = "default";
 		pinctrl-0 = <&ecap2_pins>;
@@ -646,7 +646,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
@@ -715,3 +715,11 @@
 	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 	clock-names = "ext-clk", "int-clk";
 };
+
+&pruss_tm {
+	status = "okay";
+};
+
+&wkup_m3_ipc {
+	firmware-name = "am335x-evm-scale-data.bin";
+};
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
index 1918766c1f80..b357364e93f9 100644
--- a/arch/arm/boot/dts/am335x-guardian.dts
+++ b/arch/arm/boot/dts/am335x-guardian.dts
@@ -29,39 +29,42 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	guardian_buttons: gpio-keys {
 		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pins>;
+		pinctrl-0 = <&guardian_button_pins>;
+		compatible = "gpio-keys";
+
+		select-button {
+			label = "guardian-select-button";
+			linux,code = <KEY_5>;
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
 
-		button21 {
+		power-button {
 			label = "guardian-power-button";
 			linux,code = <KEY_POWER>;
-			gpios = <&gpio2 21 0>;
+			gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 		};
 	};
 
-	leds {
-		compatible = "gpio-leds";
+	guardian_leds: gpio-leds {
 		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
+		pinctrl-0 = <&guardian_led_pins>;
+		compatible = "gpio-leds";
 
-		led1 {
-			label = "green:heartbeat";
-			gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+		life-led {
+			label = "guardian:life-led";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
+	};
 
-		led2 {
-			label = "green:mmc0";
-			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
 	};
 
 	panel {
@@ -100,20 +103,37 @@
 
 	};
 
-	pwm7: dmtimer-pwm {
+	guardian_beeper: pwm-7 {
 		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
 		ti,timers = <&timer7>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&dmtimer7_pins>;
+		pinctrl-0 = <&guardian_beeper_pins>;
 		ti,clock-source = <0x01>;
 	};
 
-	vmmcsd_fixed: regulator-3v3 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	mt_keypad: mt_keypad@0 {
+		compatible = "gpio-mt-keypad";
+		debounce-delay-ms = <10>;
+		col-scan-delay-us = <2>;
+		keypad,num-lines = <5>;
+		linux,no-autorepeat;
+		gpio-activelow;
+		line-gpios = <
+			&gpio1 24 GPIO_ACTIVE_LOW    /*gpio_56*/
+			&gpio1 23 GPIO_ACTIVE_LOW    /*gpio_55*/
+			&gpio1 22 GPIO_ACTIVE_LOW    /*gpio_54*/
+			&gpio1 20 GPIO_ACTIVE_LOW    /*gpio_52*/
+			&gpio1 16 GPIO_ACTIVE_LOW    /*gpio_48*/
+		>;
+	};
 };
 
 &elm {
@@ -133,28 +153,29 @@
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>; /* termcount */
 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		ti,nand-xfer-type = "prefetch-dma";
 		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
 		gpmc,device-width = <1>;
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
+		gpmc,cs-rd-off-ns = <30>;
+		gpmc,cs-wr-off-ns = <30>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
 		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
+		gpmc,we-off-ns = <15>;
+		gpmc,oe-on-ns = <1>;
+		gpmc,oe-off-ns = <15>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <30>;
+		gpmc,wr-cycle-ns = <30>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
+		gpmc,wr-access-ns = <0>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 
 		/*
@@ -198,18 +219,33 @@
 		};
 
 		partition@6 {
-			label = "u-boot-env";
-			reg = <0x300000 0x40000>;
+			label = "u-boot-2";
+			reg = <0x300000 0x100000>;
 		};
 
 		partition@7 {
-			label = "u-boot-env.backup1";
-			reg = <0x340000 0x40000>;
+			label = "u-boot-2.backup1";
+			reg = <0x400000 0x100000>;
 		};
 
 		partition@8 {
+			label = "u-boot-env";
+			reg = <0x500000 0x40000>;
+		};
+
+		partition@9 {
+			label = "u-boot-env.backup1";
+			reg = <0x540000 0x40000>;
+		};
+
+		partition@10 {
+			label = "splash-screen";
+			reg = <0x580000 0x40000>;
+		};
+
+		partition@11 {
 			label = "UBI";
-			reg = <0x380000 0x1fc80000>;
+			reg = <0x5c0000 0x1fa40000>;
 		};
 	};
 };
@@ -228,6 +264,11 @@
 &lcdc {
 	blue-and-red-wiring = "crossed";
 	status = "okay";
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <0>;
+		};
+	};
 };
 
 &mmc1 {
@@ -242,7 +283,6 @@
 &rtc {
 	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 	clock-names = "ext-clk", "int-clk";
-	system-power-controller;
 };
 
 &spi0 {
@@ -255,14 +295,34 @@
 #include "tps65217.dtsi"
 
 &tps {
+  /*
+   * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+   * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+   * mode and risk hardware damage if this mode is entered.
+   *
+   * For details, see linux-omap mailing list May 2015 thread
+   *  [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+   * In particular, messages:
+   *  http://www.spinics.net/lists/linux-omap/msg118585.html
+   *  http://www.spinics.net/lists/linux-omap/msg118615.html
+   *
+   * You can override this later with
+   *  &tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+   * if you want to use RTC-only mode and made sure you are not affected
+   * by the hardware problems. (Tip: double-check by performing a current
+   * measurement after shutdown: it should be less than 1 mA.)
+   */
 	ti,pmic-shutdown-controller;
 	interrupt-parent = <&intc>;
 	interrupts = <7>; /* NMI */
 
 	backlight {
 		isel = <1>;  /* 1 - ISET1, 2 ISET2 */
-		fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
-		default-brightness = <100>;
+		fdim = <500>; /* TPS65217_BL_FDIM_500HZ */
+		default-brightness = <50>;
+		/* 1(on) - enable current sink, while initialization */
+		/* 0(off) - disable current sink, while initialization */
+		isink-en = <1>;
 	};
 
 	regulators {
@@ -272,6 +332,7 @@
 		};
 
 		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
 			regulator-max-microvolt = <1351500>;
@@ -280,6 +341,7 @@
 		};
 
 		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
 			regulator-max-microvolt = <1150000>;
@@ -319,171 +381,364 @@
 	};
 };
 
+&gpio0 {
+	gpio-line-names =
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"MirxWakeup",
+		"",
+		"";
+};
+
+&gpio3 {
+	ti,gpio-always-on;
+	ti,no-reset-on-init;
+	gpio-line-names =
+		"",
+		"MirxBtReset",
+		"",
+		"CcVolAdcEn",
+		"MirxBlePause",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AspEn",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"BatVolAdcEn",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
 
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
 &usb0 {
 	dr_mode = "peripheral";
 };
 
 &usb1 {
 	dr_mode = "host";
+	/delete-property/dmas;
+	/delete-property/dma-names;
 };
 
 &am33xx_pinmux {
 	pinctrl-names = "default";
-	pinctrl-0 = <&clkout2_pin &gpio_pins>;
+	pinctrl-0 = <&clkout2_pin &guardian_interface_pins>;
 
 	clkout2_pin: pinmux_clkout2_pin {
 		pinctrl-single,pins = <
+			/* xdma_event_intr1.clkout2 */
 			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
 		>;
 	};
 
-	dmtimer7_pins: pinmux_dmtimer7_pins {
+	guardian_interface_pins: pinmux_interface_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5)
+			/* ADC_BATSENSE_EN */
+			/* (A14) MCASP0_AHCLKx.gpio3[21] */
+			AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+			/* ADC_COINCELL_EN */
+			/* (J16) MII1_TX_EN.gpio3[3] */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+			/* ASP_ENABLE */
+			/* (A13) MCASP0_ACLKx.gpio3[14] */
+			AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			/* (D16) uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE7)
+			/* (D15) uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE7)
+			/*SWITCH-OFF_3V6*/
+			/* (M18) gpio0[1] */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			/* MIRACULIX */
+			/* (H17) gmii1_crs.gpio3[1] */
+			AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+			/* (H18) rmii1_refclk.gpio0[29] */
+			AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+			/* (J18) gmii1_txd3.gpio0[16] */
+			AM33XX_IOPAD(0x91c, PIN_INPUT           | MUX_MODE7 )
+			/* (J17) gmii1_rxdv.gpio3[4] */
+			AM33XX_IOPAD(0x918, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
 		>;
 	};
 
-	gpio_keys_pins: pinmux_gpio_keys_pins {
+	guardian_beeper_pins: pinmux_dmtimer7_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) /* (E18) timer7 */
 		>;
 	};
 
-	gpio_pins: pinmux_gpio_pins {
+	guardian_button_pins: pinmux_guardian_button_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */
+			AM33XX_IOPAD(0x884, PIN_INPUT | MUX_MODE7) /* (V9)  gpmc_csn2.gpio1[31] */
 		>;
 	};
 
+
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	led_bl_pins: gpio_led_bl_pins {
+		pinctrl-single,pins = <
+			/* P9_14, gpmc_a[2].GPIO1[18] (backlight control) */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
 		>;
 	};
 
 	lcd_disen_pins: pinmux_lcd_disen_pins {
 		pinctrl-single,pins = <
+			/* P9_27, mcasp0_fsr.gpio3[19] (lcd_disen) */
 			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
 		>;
 	};
 
 	lcd_pins_default: pinmux_lcd_pins_default {
 		pinctrl-single,pins = <
+			/* (U10) gpmc_ad8.lcd_data23 */
 			AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (T10) gpmc_ad9.lcd_data22 */
 			AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (T11) gpmc_ad10.lcd_data21 */
 			AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (U12) gpmc_ad11.lcd_data20 */
 			AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (T12) gpmc_ad12.lcd_data19 */
 			AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (R12) gpmc_ad13.lcd_data18 */
 			AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (V13) gpmc_ad14.lcd_data17 */
 			AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (U13) gpmc_ad15.lcd_data16 */
 			AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* lcd_data0.lcd_data0 */
 			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data1.lcd_data1 */
 			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data2.lcd_data2 */
 			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data3.lcd_data3 */
 			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data4.lcd_data4 */
 			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data5.lcd_data5 */
 			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data6.lcd_data6 */
 			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data7.lcd_data7 */
 			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data8.lcd_data8 */
 			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data9.lcd_data9 */
 			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data10.lcd_data10 */
 			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data11.lcd_data11 */
 			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data12.lcd_data12 */
 			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data13.lcd_data13 */
 			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data14.lcd_data14 */
 			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data15.lcd_data15 */
 			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_vsync.lcd_vsync */
 			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_hsync.lcd_hsync */
 			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_pclk.lcd_pclk */
 			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_ac_bias_en.lcd_ac_bias_en */
 			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
 		>;
 	};
 
 	lcd_pins_sleep: pinmux_lcd_pins_sleep {
 		pinctrl-single,pins = <
+			/* lcd_data0.lcd_data0 */
 			AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data1.lcd_data1 */
 			AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data2.lcd_data2 */
 			AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data3.lcd_data3 */
 			AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data4.lcd_data4 */
 			AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data5.lcd_data5 */
 			AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data6.lcd_data6 */
 			AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data7.lcd_data7 */
 			AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data8.lcd_data8 */
 			AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data9.lcd_data9 */
 			AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data10.lcd_data10 */
 			AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data11.lcd_data11 */
 			AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data12.lcd_data12 */
 			AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data13.lcd_data13 */
 			AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data14.lcd_data14 */
 			AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data15.lcd_data15 */
 			AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_vsync.lcd_vsync */
 			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_hsync.lcd_hsync */
 			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_pclk.lcd_pclk */
 			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_ac_bias_en.lcd_ac_bias_en */
 			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
 		>;
 	};
 
-	leds_pins: pinmux_leds_pins {
+	guardian_led_pins: pinmux_guardian_led_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) /* (T16) gpmc_a10.gpio1[26] */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)         /* GPIO0_6 */
 		>;
 	};
 
 	spi0_pins: pinmux_spi0_pins {
 		pinctrl-single,pins = <
+			/* SPI0_CLK  - spi0_clk.spi */
 			AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			/* SPI0_MOSI - spi0_d0.spi0 */
 			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			/* SPI0_MISO - spi0_d1.spi0 */
 			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* SPI0_CS0 - spi */
 			AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0)
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
+			/* uart0_rxd.uart0_rxd */
 			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* uart0_txd.uart0_txd */
 			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
 		>;
 	};
 
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			/* K18 uart2_rxd.mirx_txd */
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1)
+			/* L18 uart2_txd.mirx_rxd */
+			AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1)
+		>;
+	};
+
 	nandflash_pins: pinmux_nandflash_pins {
 		pinctrl-single,pins = <
+			/* (U7) gpmc_ad0.gpmc_ad0 */
 			AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0)
+			/* (V7) gpmc_ad1.gpmc_ad1 */
 			AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0)
+			/* (R8) gpmc_ad2.gpmc_ad2 */
 			AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0)
+			/* (T8) gpmc_ad3.gpmc_ad3 */
 			AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0)
+			/* (U8) gpmc_ad4.gpmc_ad4 */
 			AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0)
+			/* (V8) gpmc_ad5.gpmc_ad5 */
 			AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0)
+			/* (R9) gpmc_ad6.gpmc_ad6 */
 			AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0)
+			/* (T9) gpmc_ad7.gpmc_ad7 */
 			AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0)
+			/* (T17) gpmc_wait0.gpmc_wait0 */
 			AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0)
+			/* (U17) gpmc_wpn.gpmc_wpn */
 			AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0)
+			/* (V6) gpmc_csn0.gpmc_csn0 */
 			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
+			/* (R7) gpmc_advn_ale.gpmc_advn_ale */
 			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
+			/* (T7) gpmc_oen_ren.gpmc_oen_ren */
 			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
+			/* (U6) gpmc_wen.gpmc_wen */
 			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
+			/* (T6) gpmc_be0n_cle.gpmc_be0n_cle */
 			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
 		>;
 	};
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index e923d065304d..5835c0cdda50 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -458,14 +458,14 @@
 };
 
 &gpio3 {
-	p4 {
+	pr1-mii-ctl-hog {
 		gpio-hog;
 		gpios = <4 GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PR1_MII_CTRL";
 	};
 
-	p10 {
+	mux-mii-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
@@ -508,3 +508,11 @@
 		reg = <3>;
 	};
 };
+
+&pruss_tm {
+	status = "okay";
+};
+
+&rtc {
+	system-power-controller;
+};
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index 7ec23d47a429..3fddf80dcf71 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -93,12 +93,11 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	status = "okay";
 };
 
-&davinci_mdio {
-	status = "okay";
+&davinci_mdio_sw {
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
@@ -109,15 +108,16 @@
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
-
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
+	ti,dual-emac-pvid = <2>;
 };
 
 &elm {
@@ -168,7 +168,7 @@
 		/* MTD partition table */
 		partition@0 {
 			label = "SPL";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 
 		partition@1 {
@@ -188,7 +188,7 @@
 
 		partition@4 {
 			label = "File System";
-			reg = <0x00780000 0x007880000>;
+			reg = <0x00780000 0x07880000>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index 0f078465297a..1282dae144dd 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -295,31 +295,29 @@
 	dr_mode = "host";
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <3>;
+	ti,dual-emac-pvid = <3>;
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@5 {
 		reg = <5>;
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 4e90f9c23d2e..49e280b42442 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -16,11 +16,11 @@
 
 	/* Power supply provides a fixed 3.3V @3A */
 	vmmcsd_fixed: vmmcsd-regulator {
-	      compatible = "regulator-fixed";
-	      regulator-name = "vmmcsd_fixed";
-	      regulator-min-microvolt = <3300000>;
-	      regulator-max-microvolt = <3300000>;
-	      regulator-boot-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
 	};
 
 	buttons: push_button {
@@ -122,24 +122,24 @@
 	regulator-max-microvolt = <5000000>;
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cpsw_default>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
 	status = "okay";
 };
 
-&cpsw_emac0 {
-	status = "okay";
+&cpsw_port1 {
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	status = "okay";
+&cpsw_port2 {
+	ti,dual-emac-pvid = <2>;
 };
 
 &sham {
@@ -150,7 +150,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
@@ -166,10 +166,8 @@
 &buttons {
 	pinctrl-names = "default";
 	pinctrl-0 = <&push_button_pins>;
-	#address-cells = <1>;
-	#size-cells = <0>;
 
-	button@0 {
+	button-0 {
 		label = "push_button";
 		linux,code = <0x100>;
 		gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
@@ -182,7 +180,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "mx25l6405d";
 		spi-max-frequency = <40000000>;
 
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
index 5923b6e7e1cb..1cc513ed92cc 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
@@ -52,18 +52,17 @@
 	};
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@4 {
 		reg = <4>;
 	};
 };
 
-&cpsw_emac0 {
-	status = "okay";
+&cpsw_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rmii";
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
index 98d8ed4ad967..7d00e8b20f18 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -21,11 +21,11 @@
 
 	/* Power supply provides a fixed 3.3V @3A */
 	vmmcsd_fixed: vmmcsd-regulator {
-	      compatible = "regulator-fixed";
-	      regulator-name = "vmmcsd_fixed";
-	      regulator-min-microvolt = <3300000>;
-	      regulator-max-microvolt = <3300000>;
-	      regulator-boot-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
 	};
 
 	buttons: push_button {
@@ -310,17 +310,15 @@
 	regulator-max-microvolt = <5000000>;
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cpsw_default>;
-	dual_emac = <1>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@4 {
 		reg = <4>;
@@ -331,18 +329,16 @@
 	};
 };
 
-&cpsw_emac0 {
-	status = "okay";
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	status = "okay";
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
 &sham {
@@ -353,7 +349,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
@@ -382,10 +378,8 @@
 &buttons {
 	pinctrl-names = "default";
 	pinctrl-0 = <&push_button_pins>;
-	#address-cells = <1>;
-	#size-cells = <0>;
 
-	button@0 {
+	button-0 {
 		label = "push_button";
 		linux,code = <0x100>;
 		gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
@@ -398,7 +392,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "mx25l6405d";
 		spi-max-frequency = <40000000>;
 
diff --git a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
index 270a3d5e8f98..6eea18b29355 100644
--- a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
+++ b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
@@ -27,6 +27,13 @@
 		reg = <0x80000000 0x10000000>;
 	};
 
+	clk32k: clk32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+
+		#clock-cells = <0>;
+	};
+
 	vdd_mod: vdd_mod_reg {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-mod";
@@ -57,16 +64,27 @@
 	};
 };
 
-&cpsw_emac0 {
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_slave1_pins_default>;
+	pinctrl-1 = <&eth_slave1_pins_sleep>;
+	status = "okay";
+};
+
+&cpsw_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <1>;
 };
 
-&davinci_mdio {
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&mdio_pins_default>;
 	pinctrl-1 = <&mdio_pins_sleep>;
-	status = "okay";
 
 	phy0: ethernet-phy@4 {
 		reg = <4>;
@@ -113,9 +131,6 @@
 		gpmc,wr-data-mux-bus-ns = <0>;
 		ti,elm-id = <&elm>;
 		ti,nand-ecc-opt = "bch8";
-
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 };
 
@@ -137,15 +152,9 @@
 	};
 };
 
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&eth_slave1_pins_default>;
-	pinctrl-1 = <&eth_slave1_pins_sleep>;
-	slaves = <1>;
-	status = "okay";
-};
-
 &rtc {
+	clocks = <&clk32k>;
+	clock-names = "ext-clk";
 	system-power-controller;
 };
 
diff --git a/arch/arm/boot/dts/am335x-myirtech-myd.dts b/arch/arm/boot/dts/am335x-myirtech-myd.dts
index c996639874e6..425ad9b81a68 100644
--- a/arch/arm/boot/dts/am335x-myirtech-myd.dts
+++ b/arch/arm/boot/dts/am335x-myirtech-myd.dts
@@ -86,18 +86,26 @@
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
+	status = "okay";
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy1: ethernet-phy@6 {
 		reg = <6>;
 		eee-broken-1000t;
 	};
 };
 
+&mac_sw {
+	pinctrl-0 = <&eth_slave1_pins_default>, <&eth_slave2_pins_default>;
+	pinctrl-1 = <&eth_slave1_pins_sleep>, <&eth_slave2_pins_sleep>;
+	slaves = <2>;
+};
+
 &dcan0 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&dcan0_pins_default>;
@@ -153,8 +161,13 @@
 		#sound-dai-cells = <0>;
 
 		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			port@0 {
-				hdmi_0: endpoint@0 {
+				reg = <0>;
+
+				hdmi_0: endpoint {
 					remote-endpoint = <&lcdc_0>;
 				};
 			};
@@ -194,12 +207,6 @@
 	};
 };
 
-&mac {
-	pinctrl-0 = <&eth_slave1_pins_default>, <&eth_slave2_pins_default>;
-	pinctrl-1 = <&eth_slave1_pins_sleep>, <&eth_slave2_pins_sleep>;
-	slaves = <2>;
-};
-
 &mcasp0 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&mcasp0_pins_default>;
@@ -225,14 +232,20 @@
 };
 
 &nand0 {
-	partition@0 {
-		label = "MLO";
-		reg = <0x00000 0x20000>;
-	};
+	nand_parts: partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "MLO";
+			reg = <0x00000 0x20000>;
+		};
 
-	partition@20000 {
-		label = "boot";
-		reg = <0x20000 0x80000>;
+		partition@80000 {
+			label = "boot";
+			reg = <0x80000 0x100000>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 0dbc72d726c9..c447aebd8d86 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -120,8 +120,8 @@
 
 	uart3_pins: uart3_pins {
 		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_INPUT_PULLUP, MUX_MODE6)	/* lcd_data10.uart3_ctsn */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE6)		/* lcd_data11.uart3_rtsn */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_INPUT_PULLUP, MUX_MODE7)	/* lcd_data10.gpio2[16] */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE7)		/* lcd_data11.gpio2[17] */
 			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE1)		/* spi0_cs1.uart3_rxd */
 			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT, MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
 		>;
@@ -129,8 +129,8 @@
 
 	uart4_pins: uart4_pins {
 		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT_PULLUP, MUX_MODE6)	/* lcd_data12.uart4_ctsn */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE6)		/* lcd_data13.uart4_rtsn */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT_PULLUP, MUX_MODE7)	/* lcd_data12.gpio0[8] */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE7)		/* lcd_data13.gpio0[9] */
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE1)		/* uart0_rtsn.uart4_txd */
 		>;
@@ -187,12 +187,22 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
+	rts-gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rx-during-tx;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
 	status = "okay";
 };
 
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins>;
+	rts-gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rx-during-tx;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
 	status = "okay";
 };
 
@@ -220,6 +230,11 @@
 		reg = <0x24>;
 	};
 
+	temperature-sensor@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+	};
+
 	eeprom@53 {
 		compatible = "microchip,24c02", "atmel,24c02";
 		reg = <0x53>;
@@ -369,12 +384,11 @@
 	};
 };
 
-&mac {
-	dual_emac;
+&mac_sw {
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
@@ -386,16 +400,16 @@
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
 &mmc1 {
@@ -404,8 +418,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	bus-width = <4>;
-	cd-gpios = <&gpio3 8 0>;
-	wp-gpios = <&gpio3 18 0>;
+	cd-debounce-delay-ms = <5>;
+	cd-gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb0 {
+	dr_mode = "host";
 };
 
 #include "tps65217.dtsi"
diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
index 8303b832aa50..2e049489ac06 100644
--- a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
+++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
@@ -61,21 +61,21 @@
 	dr_mode = "host";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@0 {
 		reg = <1>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	phy-handle = <&phy0>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
 
@@ -85,3 +85,147 @@
 
 	status = "okay";
 };
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"NC",
+		"NC",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"can_data",
+		"can_error",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"NC",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"NC",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"DCAN1_TX",
+		"DCAN1_RX",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"ModeA0",
+		"ModeA1",
+		"ModeA2",
+		"ModeA3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
index f8e0e95a751f..6ed886c3306b 100644
--- a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
+++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
@@ -76,20 +76,164 @@
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@0 {
 		reg = <1>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	phy-handle = <&phy0>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"UART2_RX",
+		"UART2_TX",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"NC",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"NC",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"UART2_DTR",
+		"UART2_DSR",
+		"UART2_DCD",
+		"UART2_RI",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"NC",
+		"NC",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART2_CTSN",
+		"UART2_RTSN",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"ModeA0",
+		"ModeA1",
+		"ModeA2",
+		"ModeA3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
index a4e137527215..ad3adc7679f9 100644
--- a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
+++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
@@ -71,6 +71,10 @@
 		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tca6416_pins>;
+		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+				  "GP_IN4", "GP_IN5", "GP_IN6", "GP_IN7",
+				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+				  "GP_OUT4", "GP_OUT5", "GP_OUT6", "GP_OUT7";
 	};
 };
 
@@ -86,6 +90,10 @@
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "CH1_M0", "CH1_M1", "CH1_M2", "CH1_M3",
+				  "CH2_M0", "CH2_M1", "CH2_M2", "CH2_M3",
+				  "CH3_M0", "CH3_M1", "CH3_M2", "CH3_M3",
+				  "CH4_M0", "CH4_M1", "CH4_M2", "CH4_M3";
 	};
 
 	tca6416c: gpio@21 {
@@ -93,23 +101,171 @@
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-line-names = "CH5_M0", "CH5_M1", "CH5_M2", "CH5_M3",
+				  "CH6_M0", "CH6_M1", "CH6_M2", "CH6_M3",
+				  "CH7_M0", "CH7_M1", "CH7_M2", "CH7_M3",
+				  "CH8_M0", "CH8_M1", "CH8_M2", "CH8_M3";
 	};
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy0: ethernet-phy@0 {
 		reg = <1>;
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 	phy-handle = <&phy0>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	phy-handle = <&phy1>;
 };
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"NC",
+		"NC",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"I2C2_SDA",
+		"I2C2_SCL",
+		"NC",
+		"NC",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"NC",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"NC",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"SW2_0_alt",
+		"SW2_1_alt",
+		"SW2_2_alt",
+		"SW2_3_alt",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"NC",
+		"NC",
+		"NC",
+		"3G_PWR_EN",
+		"NC",
+		"NC",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
index f841afb27844..b2846cd220f0 100644
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -25,10 +25,6 @@
 	regulator-always-on;
 };
 
-&mmc1 {
-	vmmc-supply = <&vmmcsd_fixed>;
-};
-
 &mmc2 {
 	vmmc-supply = <&vmmcsd_fixed>;
 	pinctrl-names = "default";
@@ -37,68 +33,6 @@
 	status = "okay";
 };
 
-&am33xx_pinmux {
-	nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
-		>;
-	};
-
-	mcasp0_pins: mcasp0-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
-		>;
-	};
-
-	flash_enable: flash-enable {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7) 	/* rmii1_ref_clk.gpio0_29 */
-		>;
-	};
-
-	imu_interrupt: imu-interrupt {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) 		/* mii1_rx_er.gpio3_2 */
-		>;
-	};
-
-	ethernet_interrupt: ethernet-interrupt{
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) 		/* mii1_col.gpio3_0 */
-		>;
-	};
-};
-
 &lcdc {
 	status = "okay";
 
@@ -150,7 +84,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ax8975@c {
-				compatible = "ak,ak8975";
+				compatible = "asahi-kasei,ak8975";
 				reg = <0x0c>;
 			};
 		};
@@ -167,10 +101,6 @@
 	};
 };
 
-&rtc {
-	system-power-controller;
-};
-
 &mcasp0 {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
@@ -267,6 +197,66 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&clkout2_pin>;
 
+	nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+		>;
+	};
+
+	mcasp0_pins: mcasp0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+		>;
+	};
+
+	flash_enable: flash-enable {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* rmii1_ref_clk.gpio0_29 */
+		>;
+	};
+
+	imu_interrupt: imu-interrupt {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mii1_rx_er.gpio3_2 */
+		>;
+	};
+
+	ethernet_interrupt: ethernet-interrupt{
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mii1_col.gpio3_0 */
+		>;
+	};
+
 	user_leds_s0: user-leds-s0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
@@ -401,24 +391,27 @@
 	clock-frequency = <100000>;
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
 };
 
-&mac {
-	slaves = <1>;
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@4 {
 		reg = <4>;
@@ -427,6 +420,7 @@
 
 &mmc1 {
 	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <0x4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
@@ -434,6 +428,7 @@
 };
 
 &rtc {
+	system-power-controller;
 	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 	clock-names = "ext-clk", "int-clk";
 };
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
index 6c547c83e5dd..67c7fcc52ce6 100644
--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -12,56 +12,52 @@
 	compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx";
 
 	/* Power */
-	regulators {
-		vcc3v3: fixedregulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
+	vcc3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
 
-		vcc1v8: fixedregulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "vcc1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-		};
+	vcc1v8: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
 	};
 
 	/* User IO */
-	user_leds: user_leds {
+	user_leds: user-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_pins>;
 
 		user-led0 {
 			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
 			default-state = "on";
 		};
 
 		user-led1 {
 			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "gpio";
 			default-state = "on";
 		};
 	};
 
-	user_buttons: user_buttons {
+	user_buttons: user-buttons {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_buttons_pins>;
 
-		button@0 {
+		button-0 {
 			label = "home";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
 			wakeup-source;
 		};
 
-		button@1 {
+		button-1 {
 			label = "menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
@@ -72,14 +68,14 @@
 };
 
 &am33xx_pinmux {
-	user_buttons_pins: pinmux_user_buttons {
+	user_buttons_pins: pinmux-user-buttons {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* emu0.gpio3_7 */
 			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* emu1.gpio3_8 */
 		>;
 	};
 
-	user_leds_pins: pinmux_user_leds {
+	user_leds_pins: pinmux-user-leds {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_csn1.gpio1_30 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_csn2.gpio1_31 */
@@ -89,7 +85,7 @@
 
 /* CAN */
 &am33xx_pinmux {
-	dcan1_pins: pinmux_dcan1 {
+	dcan1_pins: pinmux-dcan1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2)	/* uart1_rxd.dcan1_tx_mux2 */
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2)	/* uart1_txd.dcan1_rx_mux2 */
@@ -123,24 +119,22 @@
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy1: ethernet-phy@2 {
 		reg = <2>;
 	};
 };
 
-&mac {
-	slaves = <2>;
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
-	dual_emac;
 };
 
 /* Misc */
@@ -148,7 +142,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&cb_gpio_pins>;
 
-	cb_gpio_pins: pinmux_cb_gpio {
+	cb_gpio_pins: pinmux-cb-gpio {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* uart0_ctsn.gpio1_8 */
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* uart0_rtsn.gpio1_9 */
@@ -158,7 +152,7 @@
 
 /* MMC */
 &am33xx_pinmux {
-	mmc1_pins: pinmux_mmc1_pins {
+	mmc1_pins: pinmux-mmc1-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -182,14 +176,14 @@
 
 /* UARTs */
 &am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
+	uart0_pins: pinmux-uart0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart1_pins: pinmux_uart1 {
+	uart1_pins: pinmux-uart1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
@@ -198,14 +192,14 @@
 		>;
 	};
 
-	uart2_pins: pinmux_uart2 {
+	uart2_pins: pinmux-uart2 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rx_clk.uart2_txd */
 		>;
 	};
 
-	uart3_pins: pinmux_uart3 {
+	uart3_pins: pinmux-uart3 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxd3.uart3_rxd */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rxd2.uart3_txd */
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
index d41a5ffd83cf..ce6cc2b96654 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -353,7 +353,7 @@
 		};
 	};
 
-	mcp79400: mcp79400@6f {
+	mcp79400: rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 	};
@@ -494,17 +494,15 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&cpsw_default>;
-	dual_emac;			/* no switch, two distinct MACs */
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
-	status = "okay";
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
@@ -515,16 +513,16 @@
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
 &tscadc {
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index f9a027b47962..a4509e9e1056 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -260,20 +260,19 @@
 };
 
 /* Ethernet */
-&cpsw_emac0 {
-	status = "okay";
+&cpsw_port1 {
 	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	status = "okay";
+&cpsw_port2 {
 	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
+	ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
-	status = "okay";
+&davinci_mdio_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio_pins>;
 
@@ -286,13 +285,12 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ethernet_pins>;
 };
 
-
 &am33xx_pinmux {
 	ethernet_pins: pinmux_ethernet {
 		pinctrl-single,pins = <
@@ -557,11 +555,11 @@
 };
 
 &usb0 {
-        dr_mode = "host";
+	dr_mode = "host";
 };
 
 &usb1 {
-        dr_mode = "host";
+	dr_mode = "host";
 };
 
 &am33xx_pinmux {
@@ -598,24 +596,22 @@
 &buttons {
 	pinctrl-names = "default";
 	pinctrl-0 = <&user_buttons_pins>;
-	#address-cells = <1>;
-	#size-cells = <0>;
 
-	button0 {
+	button-0 {
 		label = "home";
 		linux,code = <KEY_HOME>;
 		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 		wakeup-source;
 	};
 
-	button1 {
+	button-1 {
 		label = "menu";
 		linux,code = <KEY_MENU>;
 		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 		wakeup-source;
 	};
 
-	buttons2 {
+	button-2 {
 		label = "power";
 		linux,code = <KEY_POWER>;
 		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 7e46b4c02709..034dc5181679 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -14,6 +14,7 @@
 	aliases {
 		rtc0 = &i2c_rtc;
 		rtc1 = &rtc;
+		rtc2 = &tps;
 	};
 
 	cpus {
@@ -48,7 +49,7 @@
 
 /* EMMC */
 &am33xx_pinmux {
-	emmc_pins: pinmux_emmc_pins {
+	emmc_pins: pinmux-emmc-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
@@ -97,24 +98,26 @@
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&davinci_mdio {
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&davinci_mdio_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio_pins>;
-	status = "okay";
 
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
 
-&mac {
-	slaves = <1>;
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ethernet0_pins>;
 	status = "okay";
@@ -122,7 +125,7 @@
 
 /* I2C Busses */
 &am33xx_pinmux {
-	i2c0_pins: pinmux_i2c0 {
+	i2c0_pins: pinmux-i2c0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
@@ -162,7 +165,7 @@
 
 /* NAND memory */
 &am33xx_pinmux {
-		nandflash_pins: pinmux_nandflash {
+		nandflash_pins: pinmux-nandflash {
 			pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -200,7 +203,6 @@
 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
-		gpmc,device-nand = "true";
 		gpmc,device-width = <1>;
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
@@ -314,7 +316,7 @@
 
 /* SPI Busses */
 &am33xx_pinmux {
-	spi0_pins: pinmux_spi0 {
+	spi0_pins: pinmux-spi0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0)
@@ -329,7 +331,7 @@
 	pinctrl-0 = <&spi0_pins>;
 	status = "okay";
 
-	serial_flash: m25p80@0 {
+	serial_flash: flash@0 {
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <48000000>;
 		reg = <0x0>;
diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
index d526c5941c9b..0ba4883cd4ef 100644
--- a/arch/arm/boot/dts/am335x-pocketbeagle.dts
+++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts
@@ -23,28 +23,28 @@
 
 		compatible = "gpio-leds";
 
-		usr0 {
+		led-usr0 {
 			label = "beaglebone:green:usr0";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		usr1 {
+		led-usr1 {
 			label = "beaglebone:green:usr1";
 			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		usr2 {
+		led-usr2 {
 			label = "beaglebone:green:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
-		usr3 {
+		led-usr3 {
 			label = "beaglebone:green:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -61,51 +61,51 @@
 
 &gpio0 {
 	gpio-line-names =
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P1.08 [SPI0_CLK]",
 		"P1.10 [SPI0_MISO]",
 		"P1.12 [SPI0_MOSI]",
 		"P1.06 [SPI0_CS]",
 		"[MMC0_CD]",
 		"P2.29 [SPI1_CLK]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
+		"[SYSBOOT 12]",
+		"[SYSBOOT 13]",
+		"[SYSBOOT 14]",
+		"[SYSBOOT 15]",
 		"P1.26 [I2C2_SDA]",
 		"P1.28 [I2C2_SCL]",
 		"P2.11 [I2C1_SDA]",
 		"P2.09 [I2C1_SCL]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
+		"NC",
 		"P2.31 [SPI1_CS]",
 		"P1.20 [PRU0.16]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P2.03",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P1.34",
 		"P2.19",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P2.05 [UART4_RX]",
 		"P2.07 [UART4_TX]";
 };
 
 &gpio1 {
 	gpio-line-names =
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
 		"P2.25 [SPI1_MOSI]",
 		"P1.32 [UART0_RX]",
 		"P1.30 [UART0_TX]",
@@ -113,10 +113,10 @@
 		"P2.33",
 		"P2.22",
 		"P2.18",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
 		"P2.01 [PWM1A]",
-		"[NC]",
+		"NC",
 		"P2.10",
 		"[USR LED 0]",
 		"[USR LED 1]",
@@ -126,35 +126,35 @@
 		"P2.04",
 		"P2.02",
 		"P2.08",
-		"[NC]",
-		"[NC]",
-		"[NC]";
+		"NC",
+		"NC",
+		"NC";
 };
 
 &gpio2 {
 	gpio-line-names =
 		"P2.20",
 		"P2.17",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
+		"NC",
 		"[EEPROM_WP]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[SYSBOOT]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"[SYSBOOT 0]",
+		"[SYSBOOT 1]",
+		"[SYSBOOT 2]",
+		"[SYSBOOT 3]",
+		"[SYSBOOT 4]",
+		"[SYSBOOT 5]",
+		"[SYSBOOT 6]",
+		"[SYSBOOT 7]",
+		"[SYSBOOT 8]",
+		"[SYSBOOT 9]",
+		"[SYSBOOT 10]",
+		"[SYSBOOT 11]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
 		"P2.35 [AIN5]",
 		"P1.02 [AIN6]",
 		"P1.35 [PRU1.10]",
@@ -169,19 +169,19 @@
 
 &gpio3 {
 	gpio-line-names =
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
 		"[I2C0_SDA]",
 		"[I2C0_SCL]",
-		"[JTAG]",
-		"[JTAG]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
+		"[JTAG EMU0]",
+		"[JTAG EMU1]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
 		"P1.03 [USB1]",
 		"P1.36 [PWM0A]",
 		"P1.33 [PRU0.1]",
@@ -191,20 +191,21 @@
 		"P2.34 [PRU0.5]",
 		"P2.28 [PRU0.6]",
 		"P1.29 [PRU0.7]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]",
-		"[NC]";
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
 };
 
 &am33xx_pinmux {
 
+	compatible = "pinconf-single";
 	pinctrl-names = "default";
 
 	pinctrl-0 =   < &P2_03_gpio &P1_34_gpio &P2_19_gpio &P2_24_gpio
diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi
index 6fbf4ac739e7..3894f14a914c 100644
--- a/arch/arm/boot/dts/am335x-regor.dtsi
+++ b/arch/arm/boot/dts/am335x-regor.dtsi
@@ -18,7 +18,7 @@
 	};
 
 	/* User IO */
-	user_leds: user_leds {
+	user_leds: user-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_pins>;
@@ -39,7 +39,7 @@
 
 /* User Leds */
 &am33xx_pinmux {
-	user_leds_pins: pinmux_user_leds {
+	user_leds_pins: pinmux-user-leds {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* lcd_hsync.gpio2_22 */
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_fsx.gpio3_15 */
@@ -49,7 +49,7 @@
 
 /* CAN Busses */
 &am33xx_pinmux {
-	dcan1_pins: pinmux_dcan1 {
+	dcan1_pins: pinmux-dcan1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2)	/* uart0_ctsn.d_can1_tx */
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)	/* uart0_rtsn.d_can1_rx */
@@ -65,7 +65,7 @@
 
 /* Ethernet */
 &am33xx_pinmux {
-	ethernet1_pins: pinmux_ethernet1 {
+	ethernet1_pins: pinmux-ethernet1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a0.mii2_txen */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
@@ -85,23 +85,22 @@
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
+	status = "okay";
 	phy-handle = <&phy1>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
 
-&mac {
-	slaves = <2>;
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
-	dual_emac = <1>;
 };
 
 /* GPIOs */
@@ -109,7 +108,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&user_gpios_pins>;
 
-	user_gpios_pins: pinmux_user_gpios {
+	user_gpios_pins: pinmux-user-gpios {
 		pinctrl-single,pins = <
 			/* DIGIN 1-4 */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7)		/* gpmc_ad11.gpio0_27 */
@@ -127,7 +126,7 @@
 
 /* MMC */
 &am33xx_pinmux {
-	mmc1_pins: pinmux_mmc1 {
+	mmc1_pins: pinmux-mmc1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -156,14 +155,14 @@
 
 /* UARTs */
 &am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
+	uart0_pins: pinmux-uart0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart2_pins: pinmux_uart2 {
+	uart2_pins: pinmux-uart2 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */
 			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rx_clk.uart2_txd */
@@ -185,7 +184,7 @@
 
 /* RS485 - UART1 */
 &am33xx_pinmux {
-	uart1_rs485_pins: pinmux_uart1_rs485_pins {
+	uart1_rs485_pins: pinmux-uart1-rs485-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
new file mode 100644
index 000000000000..f9b7e774ac48
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&am33xx_pinmux {
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	usb_hub_ctrl: usb_hub_ctrl {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)     /* rmii1_refclk.gpio0_29 */
+		>;
+	};
+};
+
+&mac_sw {
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-id";
+};
+
+&i2c0 {
+	usb2512b: usb-hub@2c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_hub_ctrl>;
+		compatible = "microchip,usb2512b";
+		reg = <0x2c>;
+		reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts b/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts
new file mode 100644
index 000000000000..a2676d10c24a
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Sancloud Ltd
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "SanCloud BeagleBone Enhanced Extended WiFi";
+	compatible = "sancloud,am335x-boneenhanced",
+		     "ti,am335x-bone-black",
+		     "ti,am335x-bone",
+		     "ti,am33xx";
+
+	wlan_en_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+	};
+};
+
+&am33xx_pinmux {
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			/* gpmc_a9.gpio1_25: RADIO_EN */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_OUTPUT_PULLUP, MUX_MODE7)
+
+			/* gpmc_ad12.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_ad13.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_ad14.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_ad15.mmc2_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_csn3.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_clk.mmc2_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)
+		>;
+	};
+
+	bluetooth_pins: pinmux_bluetooth_pins {
+		pinctrl-single,pins = <
+			/* event_intr0.gpio0_19 */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			/* uart1_rxd */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+
+			/* uart1_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+
+			/* uart1_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+
+			/* uart1_rtsn */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	ti,needs-special-hs-handling;
+	keep-power-in-suspend;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	clock-frequency = <50000000>;
+	max-frequency = <50000000>;
+};
+
+&uart1 {
+	status = "okay";
+
+	bluetooth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_pins &bluetooth_pins>;
+		compatible = "qcom,qca6174-bt";
+		enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+		clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts b/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts
new file mode 100644
index 000000000000..d6ef19311a91
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2021 SanCloud Ltd
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
+
+/ {
+	model = "SanCloud BeagleBone Enhanced Lite";
+	compatible = "sancloud,am335x-boneenhanced",
+		     "ti,am335x-bone-black",
+		     "ti,am335x-bone",
+		     "ti,am33xx";
+};
+
+&am33xx_pinmux {
+	bb_spi0_pins: pinmux_bb_spi0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE0)
+		>;
+	};
+};
+
+&spi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&bb_spi0_pins>;
+
+	channel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "micron,spi-authenta";
+
+		reg = <0>;
+		spi-max-frequency = <16000000>;
+		spi-cpha;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
index 275ba339adf4..efbe93135dbe 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -7,6 +7,8 @@
 #include "am33xx.dtsi"
 #include "am335x-bone-common.dtsi"
 #include "am335x-boneblack-common.dtsi"
+#include "am335x-boneblack-hdmi.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -15,66 +17,6 @@
 };
 
 &am33xx_pinmux {
-	pinctrl-names = "default";
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	usb_hub_ctrl: usb_hub_ctrl {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)     /* rmii1_refclk.gpio0_29 */
-		>;
-	};
-
 	mpu6050_pins: pinmux_mpu6050_pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE7)    /* uart0_ctsn.gpio1_8 */
@@ -88,31 +30,10 @@
 	};
 };
 
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&cpsw_emac0 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-id";
-};
-
 &i2c0 {
 	lps331ap: barometer@5c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lps3331ap_pins>;
 		compatible = "st,lps331ap-press";
 		st,drdy-int-pin = <1>;
 		reg = <0x5c>;
@@ -121,17 +42,12 @@
 	};
 
 	mpu6050: accelerometer@68 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mpu6050_pins>;
 		compatible = "invensense,mpu6050";
 		reg = <0x68>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
 		orientation = <0xff 0 0 0 1 0 0 0 0xff>;
 	};
-
-	usb2512b: usb-hub@2c {
-		compatible = "microchip,usb2512b";
-		reg = <0x2c>;
-		reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		/* wifi on port 4 */
-	};
 };
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 1eaa26533466..c497200f9cb0 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -36,10 +36,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		back_button {
+		back-button {
 			label = "Back Button";
 			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_BACK>;
@@ -47,7 +47,7 @@
 			wakeup-source;
 		};
 
-		front_button {
+		front-button {
 			label = "Front Button";
 			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_FRONT>;
@@ -117,18 +117,6 @@
 	status = "okay";
 };
 
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-
-	ethernetphy0: ethernet-phy@0 {
-		reg = <0>;
-		smsc,disable-energy-detect;
-	};
-};
-
 &epwmss1 {
 	status = "okay";
 
@@ -140,14 +128,14 @@
 };
 
 &gpio1 {
-	hmtc_rst {
+	hmtc-rst-hog {
 		gpio-hog;
 		gpios = <24 GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "homematic_reset";
 	};
 
-	hmtc_prog {
+	hmtc-prog-hog {
 		gpio-hog;
 		gpios = <27 GPIO_ACTIVE_LOW>;
 		output-high;
@@ -156,14 +144,14 @@
 };
 
 &gpio3 {
-	zgb_rst {
+	zgb-rst-hog {
 		gpio-hog;
 		gpios = <18 GPIO_ACTIVE_LOW>;
 		output-low;
 		line-name = "zigbee_reset";
 	};
 
-	zgb_boot {
+	zgb-boot-hog {
 		gpio-hog;
 		gpios = <19 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -193,15 +181,31 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
-	slaves = <1>;
-	cpsw_emac0: slave@200 {
-		phy-mode = "mii";
-		phy-handle = <&ethernetphy0>;
+};
+
+&cpsw_port1 {
+	phy-mode = "mii";
+	phy-handle = <&ethernetphy0>;
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+
+	ethernetphy0: ethernet-phy@0 {
+		reg = <0>;
+		smsc,disable-energy-detect;
 	};
 };
 
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index f4684c8eaffe..73b5d1a024bd 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -588,7 +588,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
 
-	flash: n25q032@1 {
+	flash: flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q032";
@@ -661,20 +661,24 @@
 	};
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-mode = "mii";
 	phy-handle = <&ethphy0>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&mac {
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&mac_sw {
 	status = "okay";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 };
 
-&davinci_mdio {
-	status = "okay";
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 1359bf8715e6..6a103f17585b 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -8,8 +8,34 @@
 	model = "Phytec AM335x phyBOARD-WEGA";
 	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
 
-	sound: sound_iface {
-		compatible = "ti,da830-evm-audio";
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "snd-wega";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_iface_main>;
+		simple-audio-card,frame-master = <&sound_iface_main>;
+		simple-audio-card,mclk-fs = <32>;
+		simple-audio-card,widgets =
+					"Line", "Line In",
+					"Line", "Line Out",
+					"Speaker", "Speaker";
+		simple-audio-card,routing =
+					"Line Out", "LLOUT",
+					"Line Out", "RLOUT",
+					"Speaker", "SPOP",
+					"Speaker", "SPOM",
+					"LINE1L", "Line In",
+					"LINE1R", "Line In";
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+		};
+
+		sound_iface_main: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3007>;
+			clocks = <&mcasp0_fck>;
+		};
+
 	};
 
 	vcc3v3: fixedregulator1 {
@@ -23,7 +49,7 @@
 
 /* Audio */
 &am33xx_pinmux {
-	mcasp0_pins: pinmux_mcasp0 {
+	mcasp0_pins: pinmux-mcasp0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
@@ -36,6 +62,7 @@
 
 &i2c0 {
 	tlv320aic3007: tlv320aic3007@18 {
+		#sound-dai-cells = <0>;
 		compatible = "ti,tlv320aic3007";
 		reg = <0x18>;
 		AVDD-supply = <&vcc3v3>;
@@ -47,6 +74,7 @@
 };
 
 &mcasp0 {
+	#sound-dai-cells = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcasp0_pins>;
 	op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
@@ -55,27 +83,14 @@
 		2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
 	>;
 	tx-num-evt = <16>;
-	rt-num-evt = <16>;
+	rx-num-evt = <16>;
 	status = "okay";
 };
 
-&sound {
-	ti,model = "AM335x-Wega";
-	ti,audio-codec = <&tlv320aic3007>;
-	ti,mcasp-controller = <&mcasp0>;
-	ti,audio-routing =
-		"Line Out",		"LLOUT",
-		"Line Out",		"RLOUT",
-		"LINE1L",		"Line In",
-		"LINE1R",		"Line In";
-	clocks = <&mcasp0_fck>;
-	clock-names = "mclk";
-	status = "okay";
-};
 
 /* CAN Busses */
 &am33xx_pinmux {
-	dcan1_pins: pinmux_dcan1 {
+	dcan1_pins: pinmux-dcan1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
 			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
@@ -91,7 +106,7 @@
 
 /* Ethernet */
 &am33xx_pinmux {
-	ethernet1_pins: pinmux_ethernet1 {
+	ethernet1_pins: pinmux-ethernet1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a0.mii2_txen */
 			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
@@ -111,28 +126,27 @@
 	};
 };
 
-&cpsw_emac1 {
+&cpsw_port2 {
+	status = "okay";
 	phy-handle = <&phy1>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
 
-&mac {
-	slaves = <2>;
+&mac_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
-	dual_emac = <1>;
 };
 
 /* MMC */
 &am33xx_pinmux {
-	mmc1_pins: pinmux_mmc1 {
+	mmc1_pins: pinmux-mmc1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
@@ -162,14 +176,14 @@
 
 /* UARTs */
 &am33xx_pinmux {
-	uart0_pins: pinmux_uart0 {
+	uart0_pins: pinmux-uart0 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart1_pins: pinmux_uart1_pins {
+	uart1_pins: pinmux-uart1 {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
index dced92a8970e..d34483ae1778 100644
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -5,251 +5,288 @@
  * Copyright (C) 2013 Texas Instruments, Inc.
  */
 &scm_clocks {
-	sys_clkin_ck: sys_clkin_ck@40 {
+	sys_clkin_ck: clock-sys-clkin-22@40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sys_clkin_ck";
 		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
 		ti,bit-shift = <22>;
 		reg = <0x0040>;
 	};
 
-	adc_tsc_fck: adc_tsc_fck {
+	adc_tsc_fck: clock-adc-tsc-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "adc_tsc_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dcan0_fck: dcan0_fck {
+	dcan0_fck: clock-dcan0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dcan0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dcan1_fck: dcan1_fck {
+	dcan1_fck: clock-dcan1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dcan1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	mcasp0_fck: mcasp0_fck {
+	mcasp0_fck: clock-mcasp0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mcasp0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	mcasp1_fck: mcasp1_fck {
+	mcasp1_fck: clock-mcasp1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mcasp1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	smartreflex0_fck: smartreflex0_fck {
+	smartreflex0_fck: clock-smartreflex0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "smartreflex0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	smartreflex1_fck: smartreflex1_fck {
+	smartreflex1_fck: clock-smartreflex1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "smartreflex1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	sha0_fck: sha0_fck {
+	sha0_fck: clock-sha0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "sha0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	aes0_fck: aes0_fck {
+	aes0_fck: clock-aes0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "aes0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	rng_fck: rng_fck {
+	rng_fck: clock-rng-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "rng_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <0>;
-		reg = <0x0664>;
-	};
+	clock@664 {
+		compatible = "ti,clksel";
+		reg = <0x664>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <1>;
-		reg = <0x0664>;
-	};
+		ehrpwm0_tbclk: clock-ehrpwm0-tbclk {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "ehrpwm0_tbclk";
+			clocks = <&l4ls_gclk>;
+			ti,bit-shift = <0>;
+		};
 
-	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <2>;
-		reg = <0x0664>;
+		ehrpwm1_tbclk: clock-ehrpwm1-tbclk {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "ehrpwm1_tbclk";
+			clocks = <&l4ls_gclk>;
+			ti,bit-shift = <1>;
+		};
+
+		ehrpwm2_tbclk: clock-ehrpwm2-tbclk {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "ehrpwm2_tbclk";
+			clocks = <&l4ls_gclk>;
+			ti,bit-shift = <2>;
+		};
 	};
 };
 &prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
+	clk_32768_ck: clock-clk-32768 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_32768_ck";
 		clock-frequency = <32768>;
 	};
 
-	clk_rc32k_ck: clk_rc32k_ck {
+	clk_rc32k_ck: clock-clk-rc32k {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_rc32k_ck";
 		clock-frequency = <32000>;
 	};
 
-	virt_19200000_ck: virt_19200000_ck {
+	virt_19200000_ck: clock-virt-19200000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_19200000_ck";
 		clock-frequency = <19200000>;
 	};
 
-	virt_24000000_ck: virt_24000000_ck {
+	virt_24000000_ck: clock-virt-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_24000000_ck";
 		clock-frequency = <24000000>;
 	};
 
-	virt_25000000_ck: virt_25000000_ck {
+	virt_25000000_ck: clock-virt-25000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_25000000_ck";
 		clock-frequency = <25000000>;
 	};
 
-	virt_26000000_ck: virt_26000000_ck {
+	virt_26000000_ck: clock-virt-26000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_26000000_ck";
 		clock-frequency = <26000000>;
 	};
 
-	tclkin_ck: tclkin_ck {
+	tclkin_ck: clock-tclkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "tclkin_ck";
 		clock-frequency = <12000000>;
 	};
 
-	dpll_core_ck: dpll_core_ck@490 {
+	dpll_core_ck: clock@490 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-core-clock";
+		clock-output-names = "dpll_core_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0490>, <0x045c>, <0x0468>;
+		reg = <0x0490>, <0x045c>, <0x0468>, <0x0460>, <0x0464>;
 	};
 
-	dpll_core_x2_ck: dpll_core_x2_ck {
+	dpll_core_x2_ck: clock-dpll-core-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-x2-clock";
+		clock-output-names = "dpll_core_x2_ck";
 		clocks = <&dpll_core_ck>;
 	};
 
-	dpll_core_m4_ck: dpll_core_m4_ck@480 {
+	dpll_core_m4_ck: clock-dpll-core-m4@480 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m4_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0480>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_m5_ck: dpll_core_m5_ck@484 {
+	dpll_core_m5_ck: clock-dpll-core-m5@484 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m5_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0484>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_m6_ck: dpll_core_m6_ck@4d8 {
+	dpll_core_m6_ck: clock-dpll-core-m6@4d8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m6_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x04d8>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_mpu_ck: dpll_mpu_ck@488 {
+	dpll_mpu_ck: clock@488 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
+		clock-output-names = "dpll_mpu_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0488>, <0x0420>, <0x042c>;
+		reg = <0x0488>, <0x0420>, <0x042c>, <0x0424>, <0x0428>;
 	};
 
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 {
+	dpll_mpu_m2_ck: clock-dpll-mpu-m2@4a8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_mpu_m2_ck";
 		clocks = <&dpll_mpu_ck>;
 		ti,max-div = <31>;
 		reg = <0x04a8>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_ddr_ck: dpll_ddr_ck@494 {
+	dpll_ddr_ck: clock@494 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-no-gate-clock";
+		clock-output-names = "dpll_ddr_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0494>, <0x0434>, <0x0440>;
+		reg = <0x0494>, <0x0434>, <0x0440>, <0x0438>, <0x043c>;
 	};
 
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 {
+	dpll_ddr_m2_ck: clock-dpll-ddr-m2@4a0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_ddr_m2_ck";
 		clocks = <&dpll_ddr_ck>;
 		ti,max-div = <31>;
 		reg = <0x04a0>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck {
+	dpll_ddr_m2_div2_ck: clock-dpll-ddr-m2-div2 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_ddr_m2_div2_ck";
 		clocks = <&dpll_ddr_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	dpll_disp_ck: dpll_disp_ck@498 {
+	dpll_disp_ck: clock@498 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-no-gate-clock";
+		clock-output-names = "dpll_disp_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0498>, <0x0448>, <0x0454>;
+		reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>;
 	};
 
-	dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 {
+	dpll_disp_m2_ck: clock-dpll-disp-m2@4a4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_disp_m2_ck";
 		clocks = <&dpll_disp_ck>;
 		ti,max-div = <31>;
 		reg = <0x04a4>;
@@ -257,418 +294,484 @@
 		ti,set-rate-parent;
 	};
 
-	dpll_per_ck: dpll_per_ck@48c {
+	dpll_per_ck: clock@48c {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-no-gate-j-type-clock";
+		clock-output-names = "dpll_per_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x048c>, <0x0470>, <0x049c>;
+		reg = <0x048c>, <0x0470>, <0x049c>, <0x0474>, <0x0478>;
 	};
 
-	dpll_per_m2_ck: dpll_per_m2_ck@4ac {
+	dpll_per_m2_ck: clock-dpll-per-m2@4ac {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2_ck";
 		clocks = <&dpll_per_ck>;
 		ti,max-div = <31>;
 		reg = <0x04ac>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+	dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_per_m2_div4_wkupdm_ck";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+	dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_per_m2_div4_ck";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	clk_24mhz: clk_24mhz {
+	clk_24mhz: clock-clk-24mhz {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "clk_24mhz";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <8>;
 	};
 
-	clkdiv32k_ck: clkdiv32k_ck {
+	clkdiv32k_ck: clock-clkdiv32k {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "clkdiv32k_ck";
 		clocks = <&clk_24mhz>;
 		clock-mult = <1>;
 		clock-div = <732>;
 	};
 
-	l3_gclk: l3_gclk {
+	l3_gclk: clock-l3-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l3_gclk";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	pruss_ocp_gclk: pruss_ocp_gclk@530 {
+	pruss_ocp_gclk: clock-pruss-ocp-gclk@530 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "pruss_ocp_gclk";
 		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
 		reg = <0x0530>;
 	};
 
-	mmu_fck: mmu_fck@914 {
+	mmu_fck: clock-mmu-fck-1@914 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "mmu_fck";
 		clocks = <&dpll_core_m4_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0914>;
 	};
 
-	timer1_fck: timer1_fck@528 {
+	timer1_fck: clock-timer1-fck@528 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer1_fck";
 		clocks = <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
 		reg = <0x0528>;
 	};
 
-	timer2_fck: timer2_fck@508 {
+	timer2_fck: clock-timer2-fck@508 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer2_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x0508>;
 	};
 
-	timer3_fck: timer3_fck@50c {
+	timer3_fck: clock-timer3-fck@50c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer3_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x050c>;
 	};
 
-	timer4_fck: timer4_fck@510 {
+	timer4_fck: clock-timer4-fck@510 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer4_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x0510>;
 	};
 
-	timer5_fck: timer5_fck@518 {
+	timer5_fck: clock-timer5-fck@518 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer5_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x0518>;
 	};
 
-	timer6_fck: timer6_fck@51c {
+	timer6_fck: clock-timer6-fck@51c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer6_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x051c>;
 	};
 
-	timer7_fck: timer7_fck@504 {
+	timer7_fck: clock-timer7-fck@504 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer7_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x0504>;
 	};
 
-	usbotg_fck: usbotg_fck@47c {
+	usbotg_fck: clock-usbotg-fck-8@47c {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usbotg_fck";
 		clocks = <&dpll_per_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x047c>;
 	};
 
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+	dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_core_m4_div2_ck";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	ieee5000_fck: ieee5000_fck@e4 {
+	ieee5000_fck: clock-ieee5000-fck-1@e4 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ieee5000_fck";
 		clocks = <&dpll_core_m4_div2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x00e4>;
 	};
 
-	wdt1_fck: wdt1_fck@538 {
+	wdt1_fck: clock-wdt1-fck@538 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "wdt1_fck";
 		clocks = <&clk_rc32k_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x0538>;
 	};
 
-	l4_rtc_gclk: l4_rtc_gclk {
+	l4_rtc_gclk: clock-l4-rtc-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4_rtc_gclk";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	l4hs_gclk: l4hs_gclk {
+	l4hs_gclk: clock-l4hs-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4hs_gclk";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l3s_gclk: l3s_gclk {
+	l3s_gclk: clock-l3s-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l3s_gclk";
 		clocks = <&dpll_core_m4_div2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l4fw_gclk: l4fw_gclk {
+	l4fw_gclk: clock-l4fw-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4fw_gclk";
 		clocks = <&dpll_core_m4_div2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l4ls_gclk: l4ls_gclk {
+	l4ls_gclk: clock-l4ls-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4ls_gclk";
 		clocks = <&dpll_core_m4_div2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	sysclk_div_ck: sysclk_div_ck {
+	sysclk_div_ck: clock-sysclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "sysclk_div_ck";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+	cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "cpsw_125mhz_gclk";
 		clocks = <&dpll_core_m5_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 {
+	cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@520 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "cpsw_cpts_rft_clk";
 		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
 		reg = <0x0520>;
 	};
 
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c {
+	gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@53c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gpio0_dbclk_mux_ck";
 		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x053c>;
 	};
 
-	lcd_gclk: lcd_gclk@534 {
+	lcd_gclk: clock-lcd-gclk@534 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "lcd_gclk";
 		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
 		reg = <0x0534>;
 		ti,set-rate-parent;
 	};
 
-	mmc_clk: mmc_clk {
+	mmc_clk: clock-mmc {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mmc_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x052c>;
-	};
+	clock@52c {
+		compatible = "ti,clksel";
+		reg = <0x52c>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	gfx_fck_div_ck: gfx_fck_div_ck@52c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&gfx_fclk_clksel_ck>;
-		reg = <0x052c>;
-		ti,max-div = <2>;
-	};
+		gfx_fclk_clksel_ck: clock-gfx-fclk-clksel {
+			#clock-cells = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "gfx_fclk_clksel_ck";
+			clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
+			ti,bit-shift = <1>;
+		};
 
-	sysclkout_pre_ck: sysclkout_pre_ck@700 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
-		reg = <0x0700>;
+		gfx_fck_div_ck: clock-gfx-fck-div {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "gfx_fck_div_ck";
+			clocks = <&gfx_fclk_clksel_ck>;
+			ti,max-div = <2>;
+		};
 	};
 
-	clkout2_div_ck: clkout2_div_ck@700 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sysclkout_pre_ck>;
-		ti,bit-shift = <3>;
-		ti,max-div = <8>;
-		reg = <0x0700>;
-	};
+	clock@700 {
+		compatible = "ti,clksel";
+		reg = <0x700>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	clkout2_ck: clkout2_ck@700 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkout2_div_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0700>;
+		sysclkout_pre_ck: clock-sysclkout-pre {
+			#clock-cells = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "sysclkout_pre_ck";
+			clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
+		};
+
+		clkout2_div_ck: clock-clkout2-div {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "clkout2_div_ck";
+			clocks = <&sysclkout_pre_ck>;
+			ti,bit-shift = <3>;
+			ti,max-div = <8>;
+		};
+
+		clkout2_ck: clock-clkout2 {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "clkout2_ck";
+			clocks = <&clkout2_div_ck>;
+			ti,bit-shift = <7>;
+		};
 	};
 };
 
 &prcm {
-	per_cm: per-cm@0 {
+	per_cm: clock@0 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "per_cm";
 		reg = <0x0 0x400>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x0 0x400>;
 
-		l4ls_clkctrl: l4ls-clkctrl@38 {
+		l4ls_clkctrl: clock@38 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4ls_clkctrl";
 			reg = <0x38 0x2c>, <0x6c 0x28>, <0xac 0xc>, <0xc0 0x1c>, <0xec 0xc>, <0x10c 0x8>, <0x130 0x4>;
 			#clock-cells = <2>;
 		};
 
-		l3s_clkctrl: l3s-clkctrl@1c {
+		l3s_clkctrl: clock@1c {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3s_clkctrl";
 			reg = <0x1c 0x4>, <0x30 0x8>, <0x68 0x4>, <0xf8 0x4>;
 			#clock-cells = <2>;
 		};
 
-		l3_clkctrl: l3-clkctrl@24 {
+		l3_clkctrl: clock@24 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_clkctrl";
 			reg = <0x24 0xc>, <0x94 0x10>, <0xbc 0x4>, <0xdc 0x8>, <0xfc 0x8>;
 			#clock-cells = <2>;
 		};
 
-		l4hs_clkctrl: l4hs-clkctrl@120 {
+		l4hs_clkctrl: clock@120 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4hs_clkctrl";
 			reg = <0x120 0x4>;
 			#clock-cells = <2>;
 		};
 
-		pruss_ocp_clkctrl: pruss-ocp-clkctrl@e8 {
+		pruss_ocp_clkctrl: clock@e8 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "pruss_ocp_clkctrl";
 			reg = <0xe8 0x4>;
 			#clock-cells = <2>;
 		};
 
-		cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@0 {
+		cpsw_125mhz_clkctrl: clock@0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "cpsw_125mhz_clkctrl";
 			reg = <0x0 0x18>;
 			#clock-cells = <2>;
 		};
 
-		lcdc_clkctrl: lcdc-clkctrl@18 {
+		lcdc_clkctrl: clock@18 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "lcdc_clkctrl";
 			reg = <0x18 0x4>;
 			#clock-cells = <2>;
 		};
 
-		clk_24mhz_clkctrl: clk-24mhz-clkctrl@14c {
+		clk_24mhz_clkctrl: clock@14c {
 			compatible = "ti,clkctrl";
+			clock-output-names = "clk_24mhz_clkctrl";
 			reg = <0x14c 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	wkup_cm: wkup-cm@400 {
+	wkup_cm: clock@400 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "wkup_cm";
 		reg = <0x400 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x400 0x100>;
 
-		l4_wkup_clkctrl: l4-wkup-clkctrl@0 {
+		l4_wkup_clkctrl: clock@0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_wkup_clkctrl";
 			reg = <0x0 0x10>, <0xb4 0x24>;
 			#clock-cells = <2>;
 		};
 
-		l3_aon_clkctrl: l3-aon-clkctrl@14 {
+		l3_aon_clkctrl: clock@14 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_aon_clkctrl";
 			reg = <0x14 0x4>;
 			#clock-cells = <2>;
 		};
 
-		l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@b0 {
+		l4_wkup_aon_clkctrl: clock@b0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_wkup_aon_clkctrl";
 			reg = <0xb0 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	mpu_cm: mpu-cm@600 {
+	mpu_cm: clock@600 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "mpu_cm";
 		reg = <0x600 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x600 0x100>;
 
-		mpu_clkctrl: mpu-clkctrl@0 {
+		mpu_clkctrl: clock@0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "mpu_clkctrl";
 			reg = <0x0 0x8>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l4_rtc_cm: l4-rtc-cm@800 {
+	l4_rtc_cm: clock@800 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_rtc_cm";
 		reg = <0x800 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x800 0x100>;
 
-		l4_rtc_clkctrl: l4-rtc-clkctrl@0 {
+		l4_rtc_clkctrl: clock@0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_rtc_clkctrl";
 			reg = <0x0 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	gfx_l3_cm: gfx-l3-cm@900 {
+	gfx_l3_cm: clock@900 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "gfx_l3_cm";
 		reg = <0x900 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x900 0x100>;
 
-		gfx_l3_clkctrl: gfx-l3-clkctrl@0 {
+		gfx_l3_clkctrl: clock@0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "gfx_l3_clkctrl";
 			reg = <0x0 0x8>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l4_cefuse_cm: l4-cefuse-cm@a00 {
+	l4_cefuse_cm: clock@a00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_cefuse_cm";
 		reg = <0xa00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xa00 0x100>;
 
-		l4_cefuse_clkctrl: l4-cefuse-clkctrl@0 {
+		l4_cefuse_clkctrl: clock@0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_cefuse_clkctrl";
 			reg = <0x0 0x24>;
 			#clock-cells = <2>;
 		};
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 1fb22088caeb..7e50fe633d8a 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -259,22 +259,24 @@
 			ranges = <0x00000000 0x0000d000 0x00001000>,
 				 <0x00001000 0x0000e000 0x00001000>;
 
-				tscadc: tscadc@0 {
-					compatible = "ti,am3359-tscadc";
-					reg = <0x0 0x1000>;
-					interrupts = <16>;
-					status = "disabled";
-					dmas = <&edma 53 0>, <&edma 57 0>;
-					dma-names = "fifo0", "fifo1";
+			tscadc: tscadc@0 {
+				compatible = "ti,am3359-tscadc";
+				reg = <0x0 0x1000>;
+				interrupts = <16>;
+				clocks = <&adc_tsc_fck>;
+				clock-names = "fck";
+				status = "disabled";
+				dmas = <&edma 53 0>, <&edma 57 0>;
+				dma-names = "fifo0", "fifo1";
 
-					tsc {
-						compatible = "ti,am3359-tsc";
-					};
-					am335x_adc: adc {
-						#io-channel-cells = <1>;
-						compatible = "ti,am3359-adc";
-					};
+				tsc {
+					compatible = "ti,am3359-tsc";
+				};
+				am335x_adc: adc {
+					#io-channel-cells = <1>;
+					compatible = "ti,am3359-adc";
 				};
+			};
 		};
 
 		target-module@10000 {			/* 0x44e10000, ap 22 0c.0 */
@@ -853,6 +855,88 @@
 			#size-cells = <1>;
 			ranges = <0x0 0x300000 0x80000>;
 			status = "disabled";
+
+			pruss: pruss@0 {
+				compatible = "ti,am3356-pruss";
+				reg = <0x0 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pruss_mem: memories@0 {
+					reg = <0x0 0x2000>,
+					      <0x2000 0x2000>,
+					      <0x10000 0x3000>;
+					reg-names = "dram0", "dram1",
+						    "shrdram2";
+				};
+
+				pruss_cfg: cfg@26000 {
+					compatible = "ti,pruss-cfg", "syscon";
+					reg = <0x26000 0x2000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x26000 0x2000>;
+
+					clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						pruss_iepclk_mux: iepclk-mux@30 {
+							reg = <0x30>;
+							#clock-cells = <0>;
+							clocks = <&l3_gclk>,        /* icss_iep_gclk */
+								 <&pruss_ocp_gclk>; /* icss_ocp_gclk */
+						};
+					};
+				};
+
+				pruss_mii_rt: mii-rt@32000 {
+					compatible = "ti,pruss-mii", "syscon";
+					reg = <0x32000 0x58>;
+				};
+
+				pruss_intc: interrupt-controller@20000 {
+					compatible = "ti,pruss-intc";
+					reg = <0x20000 0x2000>;
+					interrupts = <20 21 22 23 24 25 26 27>;
+					interrupt-names = "host_intr0", "host_intr1",
+							  "host_intr2", "host_intr3",
+							  "host_intr4", "host_intr5",
+							  "host_intr6", "host_intr7";
+					interrupt-controller;
+					#interrupt-cells = <3>;
+				};
+
+				pru0: pru@34000 {
+					compatible = "ti,am3356-pru";
+					reg = <0x34000 0x2000>,
+					      <0x22000 0x400>,
+					      <0x22400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am335x-pru0-fw";
+				};
+
+				pru1: pru@38000 {
+					compatible = "ti,am3356-pru";
+					reg = <0x38000 0x2000>,
+					      <0x24000 0x400>,
+					      <0x24400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am335x-pru1-fw";
+				};
+
+				pruss_mdio: mdio@32400 {
+					compatible = "ti,davinci_mdio";
+					reg = <0x32400 0x90>;
+					clocks = <&dpll_core_m4_ck>;
+					clock-names = "fck";
+					bus_freq = <1000000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+				};
+			};
 		};
 	};
 };
@@ -1418,8 +1502,7 @@
 			mmc1: mmc@0 {
 				compatible = "ti,am335-sdhci";
 				ti,needs-special-reset;
-				dmas = <&edma_xbar 24 0 0
-					&edma_xbar 25 0 0>;
+				dmas = <&edma 24 0>, <&edma 25 0>;
 				dma-names = "tx", "rx";
 				interrupts = <64>;
 				reg = <0x0 0x1000>;
@@ -1486,7 +1569,7 @@
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <4>;
 				ti,mbox-num-fifos = <8>;
-				mbox_wkupm3: wkup_m3 {
+				mbox_wkupm3: mbox-wkup-m3 {
 					ti,mbox-send-noirq;
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <0 0 3>;
@@ -1789,7 +1872,7 @@
 			};
 		};
 
-		target-module@ae000 {			/* 0x481ae000, ap 56 3a.0 */
+		gpio3_target: target-module@ae000 {		/* 0x481ae000, ap 56 3a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0xae000 0x4>,
 			      <0xae010 0x4>,
@@ -1995,15 +2078,12 @@
 				status = "disabled";
 				ranges = <0 0 0x1000>;
 
-				ecap0: ecap@100 {
-					compatible = "ti,am3352-ecap",
-						     "ti,am33xx-ecap";
+				ecap0: pwm@100 {
+					compatible = "ti,am3352-ecap";
 					#pwm-cells = <3>;
 					reg = <0x100 0x80>;
 					clocks = <&l4ls_gclk>;
 					clock-names = "fck";
-					interrupts = <31>;
-					interrupt-names = "ecap0";
 					status = "disabled";
 				};
 
@@ -2017,8 +2097,7 @@
 				};
 
 				ehrpwm0: pwm@200 {
-					compatible = "ti,am3352-ehrpwm",
-						     "ti,am33xx-ehrpwm";
+					compatible = "ti,am3352-ehrpwm";
 					#pwm-cells = <3>;
 					reg = <0x200 0x80>;
 					clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
@@ -2056,15 +2135,12 @@
 				status = "disabled";
 				ranges = <0 0 0x1000>;
 
-				ecap1: ecap@100 {
-					compatible = "ti,am3352-ecap",
-						     "ti,am33xx-ecap";
+				ecap1: pwm@100 {
+					compatible = "ti,am3352-ecap";
 					#pwm-cells = <3>;
 					reg = <0x100 0x80>;
 					clocks = <&l4ls_gclk>;
 					clock-names = "fck";
-					interrupts = <47>;
-					interrupt-names = "ecap1";
 					status = "disabled";
 				};
 
@@ -2078,8 +2154,7 @@
 				};
 
 				ehrpwm1: pwm@200 {
-					compatible = "ti,am3352-ehrpwm",
-						     "ti,am33xx-ehrpwm";
+					compatible = "ti,am3352-ehrpwm";
 					#pwm-cells = <3>;
 					reg = <0x200 0x80>;
 					clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
@@ -2117,15 +2192,12 @@
 				status = "disabled";
 				ranges = <0 0 0x1000>;
 
-				ecap2: ecap@100 {
-					compatible = "ti,am3352-ecap",
-						     "ti,am33xx-ecap";
+				ecap2: pwm@100 {
+					compatible = "ti,am3352-ecap";
 					#pwm-cells = <3>;
 					reg = <0x100 0x80>;
 					clocks = <&l4ls_gclk>;
 					clock-names = "fck";
-					interrupts = <61>;
-					interrupt-names = "ecap2";
 					status = "disabled";
 				};
 
@@ -2139,8 +2211,7 @@
 				};
 
 				ehrpwm2: pwm@200 {
-					compatible = "ti,am3352-ehrpwm",
-						     "ti,am33xx-ehrpwm";
+					compatible = "ti,am3352-ehrpwm";
 					#pwm-cells = <3>;
 					reg = <0x200 0x80>;
 					clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 5b213a1e68bb..32d397b3950b 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for AM33XX SoC
  *
  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/bus/ti-sysc.h>
@@ -36,10 +33,13 @@
 		usb1 = &usb1;
 		phy0 = &usb0_phy;
 		phy1 = &usb1_phy;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
 		spi0 = &spi0;
 		spi1 = &spi1;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 	};
 
 	cpus {
@@ -458,8 +458,11 @@
 				interrupts = <17>;
 				interrupt-names = "glue";
 				#dma-cells = <2>;
+				/* For backwards compatibility: */
 				#dma-channels = <30>;
+				dma-channels = <30>;
 				#dma-requests = <256>;
+				dma-requests = <256>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi
index 7d8f32bf70db..75ad42179aee 100644
--- a/arch/arm/boot/dts/am3517-evm-ui.dtsi
+++ b/arch/arm/boot/dts/am3517-evm-ui.dtsi
@@ -70,61 +70,61 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <100>;
 
-		record {
+		key-record {
 			label = "Record";
 			/* linux,code = <BTN_0>; */
 			gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
 		};
 
-		play {
+		key-play {
 			label = "Play";
 			linux,code = <KEY_PLAY>;
 			gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>;
 		};
 
-		Stop {
+		key-stop {
 			label = "Stop";
 			linux,code = <KEY_STOP>;
 			gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>;
 		};
 
-		fwd {
+		key-fwd {
 			label = "FWD";
 			linux,code = <KEY_FASTFORWARD>;
 			gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>;
 		};
 
-		rwd {
+		key-rwd {
 			label = "RWD";
 			linux,code = <KEY_REWIND>;
 			gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>;
 		};
 
-		shift {
+		key-shift {
 			label = "Shift";
 			linux,code = <KEY_LEFTSHIFT>;
 			gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>;
 		};
 
-		Mode {
+		key-mode {
 			label = "Mode";
 			linux,code = <BTN_MODE>;
 			gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>;
 		};
 
-		Menu {
+		key-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>;
 		};
 
-		Up {
+		key-up {
 			label = "Up";
 			linux,code = <KEY_UP>;
 			gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>;
 		};
 
-		Down {
+		key-down {
 			label = "Down";
 			linux,code = <KEY_DOWN>;
 			gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
@@ -137,14 +137,14 @@
 	tlv320aic23_1: codec@1a {
 		compatible = "ti,tlv320aic23";
 		reg = <0x1a>;
-		#sound-dai-cells= <0>;
+		#sound-dai-cells = <0>;
 		status = "okay";
 	};
 
 	tlv320aic23_2: codec@1b {
 		compatible = "ti,tlv320aic23";
 		reg = <0x1b>;
-		#sound-dai-cells= <0>;
+		#sound-dai-cells = <0>;
 		status = "okay";
 	};
 };
@@ -154,7 +154,7 @@
 	tlv320aic23_3: codec@1a {
 		compatible = "ti,tlv320aic23";
 		reg = <0x1a>;
-		#sound-dai-cells= <0>;
+		#sound-dai-cells = <0>;
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index 0d2fac98ce7d..11618aa501fc 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -26,66 +26,66 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-        vmmc_fixed: vmmc {
-                compatible = "regulator-fixed";
-                regulator-name = "vmmc_fixed";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-        };
+	vmmc_fixed: vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
 	gpio-keys {
 		compatible = "gpio-keys-polled";
 		poll-interval = <100>;
 
-		user_pb {
+		button-user {
 			label = "User Push Button";
 			linux,code = <BTN_0>;
 			gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
 		};
 
-		user_sw_1 {
+		switch-1 {
 			label = "User Switch 1";
 			linux,code = <BTN_1>;
 			gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
 		};
 
-		user_sw_2 {
+		switch-2 {
 			label = "User Switch 2";
 			linux,code = <BTN_2>;
 			gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
 		};
 
-		user_sw_3 {
+		switch-3 {
 			label = "User Switch 3";
 			linux,code = <BTN_3>;
 			gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
 		};
 
-		user_sw_4 {
+		switch-4 {
 			label = "User Switch 4";
 			linux,code = <BTN_4>;
 			gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
 		};
 
-		user_sw_5 {
+		switch-5 {
 			label = "User Switch 5";
 			linux,code = <BTN_5>;
 			gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
 		};
 
-		user_sw_6 {
+		switch-6 {
 			label = "User Switch 6";
 			linux,code = <BTN_6>;
 			gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
 		};
 
-		user_sw_7 {
+		switch-7 {
 			label = "User Switch 7";
 			linux,code = <BTN_7>;
 			gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
 		};
 
-		user_sw_8 {
+		switch-8 {
 			label = "User Switch 8";
 			linux,code = <BTN_8>;
 			gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
@@ -150,7 +150,7 @@
 		enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
 	};
 
-	pwm11: dmtimer-pwm@11 {
+	pwm11: pwm-11 {
 		compatible = "ti,omap-dmtimer-pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm_pins>;
@@ -161,6 +161,8 @@
 
 	/* HS USB Host PHY on PORT 1 */
 	hsusb1_phy: hsusb1_phy {
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1_rst_pins>;
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
 		#phy-cells = <0>;
@@ -168,11 +170,13 @@
 };
 
 &davinci_emac {
-	     status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	status = "okay";
 };
 
 &davinci_mdio {
-	     status = "okay";
+	status = "okay";
 };
 
 &dss {
@@ -193,6 +197,8 @@
 };
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
 	/* User DIP swithes [1:8] / User LEDS [1:2] */
 	tca6416: gpio@21 {
@@ -205,6 +211,8 @@
 };
 
 &i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
 	clock-frequency = <400000>;
 };
 
@@ -219,10 +227,12 @@
 };
 
 &mmc3 {
-      status = "disabled";
+	status = "disabled";
 };
 
 &usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
 	port1-mode = "ehci-phy";
 };
 
@@ -231,8 +241,35 @@
 };
 
 &omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_rst_pins>;
+
+	ethernet_pins: pinmux_ethernet_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+			OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+			OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+			OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+			OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+			OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+			OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+			OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+			OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
+		>;
+	};
 
 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
@@ -300,8 +337,6 @@
 };
 
 &omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb1_pins>;
 
 	hsusb1_pins: pinmux_hsusb1_pins {
 		pinctrl-single,pins = <
diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi
index 8b669e2eafec..f7b680f6c48a 100644
--- a/arch/arm/boot/dts/am3517-som.dtsi
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@@ -69,6 +69,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
 	s35390a: s35390a@30 {
@@ -179,6 +181,13 @@
 
 &omap3_pmx_core {
 
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_sda */
+		>;
+	};
+
 	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index de33c4f89f33..823f63502e9f 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for am3517 SoC
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "omap3.dtsi"
@@ -52,13 +49,35 @@
 	};
 
 	ocp@68000000 {
-		am35x_otg_hs: am35x_otg_hs@5c040000 {
-			compatible = "ti,omap3-musb";
-			ti,hwmods = "am35x_otg_hs";
-			status = "disabled";
-			reg = <0x5c040000 0x1000>;
-			interrupts = <71>;
-			interrupt-names = "mc";
+		target-module@5c040000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5c040400 0x4>,
+			      <0x5c040404 0x4>,
+			      <0x5c040408 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&hsotgusb_ick_am35xx>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5c040000 0x1000>;
+
+			am35x_otg_hs: am35x_otg_hs@0 {
+				compatible = "ti,omap3-musb";
+				status = "disabled";
+				reg = <0 0x1000>;
+				interrupts = <71>;
+				interrupt-names = "mc";
+			};
 		};
 
 		davinci_emac: ethernet@5c000000 {
@@ -157,7 +176,7 @@
 };
 
 /* Table Table 5-79 of the TRM shows 480ab000 is reserved */
-&usb_otg_hs {
+&usb_otg_target {
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
index 220d0a52797e..0ee7afaa0e8e 100644
--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am35xx-clocks.dtsi
@@ -62,12 +62,27 @@
 	};
 };
 &cm_clocks {
-	ipss_ick: ipss_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
+	clock@a10 {
+		compatible = "ti,clksel";
+		reg = <0xa10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		ipss_ick: clock-ipss-ick {
+			#clock-cells = <0>;
+			compatible = "ti,am35xx-interface-clock";
+			clock-output-names = "ipss_ick";
+			clocks = <&core_l3_ick>;
+			ti,bit-shift = <4>;
+		};
+
+		uart4_ick_am35xx: clock-uart4-ick-am35xx {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "uart4_ick_am35xx";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <23>;
+		};
 	};
 
 	rmii_ck: rmii_ck {
@@ -82,20 +97,19 @@
 		clock-frequency = <27000000>;
 	};
 
-	uart4_ick_am35xx: uart4_ick_am35xx@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <23>;
-	};
+	clock@a00 {
+		compatible = "ti,clksel";
+		reg = <0xa00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	uart4_fck_am35xx: uart4_fck_am35xx@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <23>;
+		uart4_fck_am35xx: clock-uart4-fck-am35xx {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "uart4_fck_am35xx";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <23>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts
index 9423e9feaa10..791478e81c5a 100644
--- a/arch/arm/boot/dts/am3874-iceboard.dts
+++ b/arch/arm/boot/dts/am3874-iceboard.dts
@@ -106,7 +106,7 @@
 	 * "i2c-mux-idle-disconnect" is important.
 	 */
 
-	pca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -213,7 +213,7 @@
 
 			u48: pca9575@22 {
 				compatible = "nxp,pca9575";
-				reg=<0x22>;
+				reg = <0x22>;
 				gpio-controller;
 				#gpio-cells = <2>;
 
@@ -232,7 +232,7 @@
 
 			u59: pca9575@23 {
 				compatible = "nxp,pca9575";
-				reg=<0x23>;
+				reg = <0x23>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				gpio-line-names =
@@ -256,7 +256,7 @@
 };
 
 &i2c2 {
-	pca9548@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9548";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -434,7 +434,7 @@
 };
 
 &mcspi1 {
-	s25fl256@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 57a85a6c34a2..8613355bbd5e 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for AM4372 SoC
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/bus/ti-sysc.h>
@@ -434,6 +431,171 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x54400000 0x80000>;
+
+			pruss1: pruss@0 {
+				compatible = "ti,am4376-pruss1";
+				reg = <0x0 0x40000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pruss1_mem: memories@0 {
+					reg = <0x0 0x2000>,
+					      <0x2000 0x2000>,
+					      <0x10000 0x8000>;
+					reg-names = "dram0", "dram1",
+						    "shrdram2";
+				};
+
+				pruss1_cfg: cfg@26000 {
+					compatible = "ti,pruss-cfg", "syscon";
+					reg = <0x26000 0x2000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x26000 0x2000>;
+
+					clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						pruss1_iepclk_mux: iepclk-mux@30 {
+							reg = <0x30>;
+							#clock-cells = <0>;
+							clocks = <&sysclk_div>,     /* icss_iep_gclk */
+								 <&pruss_ocp_gclk>; /* icss_ocp_gclk */
+						};
+					};
+				};
+
+				pruss1_mii_rt: mii-rt@32000 {
+					compatible = "ti,pruss-mii", "syscon";
+					reg = <0x32000 0x58>;
+				};
+
+				pruss1_intc: interrupt-controller@20000 {
+					compatible = "ti,pruss-intc";
+					reg = <0x20000 0x2000>;
+					interrupt-controller;
+					#interrupt-cells = <3>;
+					interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "host_intr0", "host_intr1",
+							  "host_intr2", "host_intr3",
+							  "host_intr4",
+							  "host_intr6", "host_intr7";
+					ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+				};
+
+				pru1_0: pru@34000 {
+					compatible = "ti,am4376-pru";
+					reg = <0x34000 0x3000>,
+					      <0x22000 0x400>,
+					      <0x22400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am437x-pru1_0-fw";
+				};
+
+				pru1_1: pru@38000 {
+					compatible = "ti,am4376-pru";
+					reg = <0x38000 0x3000>,
+					      <0x24000 0x400>,
+					      <0x24400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am437x-pru1_1-fw";
+				};
+
+				pruss1_mdio: mdio@32400 {
+					compatible = "ti,davinci_mdio";
+					reg = <0x32400 0x90>;
+					clocks = <&dpll_core_m4_ck>;
+					clock-names = "fck";
+					bus_freq = <1000000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			pruss0: pruss@40000 {
+				compatible = "ti,am4376-pruss0";
+				reg = <0x40000 0x40000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pruss0_mem: memories@40000 {
+					reg = <0x40000 0x1000>,
+					      <0x42000 0x1000>;
+					reg-names = "dram0", "dram1";
+				};
+
+				pruss0_cfg: cfg@66000 {
+					compatible = "ti,pruss-cfg", "syscon";
+					reg = <0x66000 0x2000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x66000 0x2000>;
+
+					clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						pruss0_iepclk_mux: iepclk-mux@30 {
+							reg = <0x30>;
+							#clock-cells = <0>;
+							clocks = <&sysclk_div>,     /* icss_iep_gclk */
+								 <&pruss_ocp_gclk>; /* icss_ocp_gclk */
+						};
+					};
+				};
+
+				pruss0_mii_rt: mii-rt@72000 {
+					compatible = "ti,pruss-mii", "syscon";
+					reg = <0x72000 0x58>;
+					status = "disabled";
+				};
+
+				pruss0_intc: interrupt-controller@60000 {
+					compatible = "ti,pruss-intc";
+					reg = <0x60000 0x2000>;
+					interrupt-controller;
+					#interrupt-cells = <3>;
+					interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "host_intr0", "host_intr1",
+							  "host_intr2", "host_intr3",
+							  "host_intr4",
+							  "host_intr6", "host_intr7";
+					ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+				};
+
+				pru0_0: pru@74000 {
+					compatible = "ti,am4376-pru";
+					reg = <0x74000 0x1000>,
+					      <0x62000 0x400>,
+					      <0x62400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am437x-pru0_0-fw";
+				};
+
+				pru0_1: pru@78000 {
+					compatible = "ti,am4376-pru";
+					reg = <0x78000 0x1000>,
+					      <0x64000 0x400>,
+					      <0x64400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am437x-pru0_1-fw";
+				};
+			};
 		};
 
 		target-module@50000000 {
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
index a83f46ed0c9a..0861e868b75a 100644
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -302,7 +302,7 @@
 		&edma 17 0>;
 	dma-names = "tx0", "rx0";
 
-	flash: w25q64cvzpig@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
@@ -399,7 +399,7 @@
 	tsc {
 		ti,wires = <4>;
 		ti,x-plate-resistance = <200>;
-		ti,coordiante-readouts = <5>;
+		ti,coordinate-readouts = <5>;
 		ti,wire-config = <0x00 0x11 0x22 0x33>;
 	};
 
@@ -416,3 +416,7 @@
 			   <600000 1100000>,
 			   <300000 950000>;
 };
+
+&pruss1_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 6e4d05d649e9..46d5361fe876 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -775,6 +775,14 @@
 	};
 };
 
+&magadc {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
 &ecap0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -786,7 +794,7 @@
 	pinctrl-0 = <&gpio0_pins>;
 	status = "okay";
 
-	p23 {
+	sel-emmc-nand-hog {
 		gpio-hog;
 		gpios = <23 GPIO_ACTIVE_HIGH>;
 		/* SelEMMCorNAND selects between eMMC and NAND:
@@ -813,13 +821,16 @@
 	status = "okay";
 };
 
+&gpio5_target {
+	ti,no-reset-on-init;
+};
+
 &gpio5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
-	ti,no-reset-on-init;
 
-	p8 {
+	sel-lcd-hdmi-hog {
 		/*
 		 * SelLCDorHDMI selects between display and audio paths:
 		 * Low: HDMI display with audio via HDMI
@@ -1115,3 +1126,12 @@
 &cpu {
 	cpu0-supply = <&dcdc2>;
 };
+
+&wkup_m3_ipc {
+	ti,set-io-isolation;
+	firmware-name = "am43x-evm-scale-data.bin";
+};
+
+&pruss1_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 2dc525512266..e46cf2a9d075 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -98,14 +98,12 @@
 		vin-supply = <&v1_5dreg>;
 	};
 
-	gpio_keys: gpio_keys {
+	gpio_keys: gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pins_default>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		switch0 {
+		switch-0 {
 			label = "power-button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
@@ -437,7 +435,7 @@
 	pinctrl-1 = <&qspi_pins_sleep>;
 
 	spi-max-frequency = <48000000>;
-	m25p80@0 {
+	flash@0 {
 		compatible = "mx66l51235l";
 		spi-max-frequency = <48000000>;
 		reg = <0>;
@@ -454,7 +452,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 		partition@1 {
 			label = "QSPI.U_BOOT.backup";
@@ -537,3 +535,7 @@
 		opp-suspend;
 	};
 };
+
+&pruss1_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index e217ffc09770..415210b034ef 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -194,7 +194,7 @@
 			ranges = <0x0 0x9000 0x1000>;
 
 			uart0: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			};
@@ -712,7 +712,7 @@
 			ranges = <0x0 0x22000 0x1000>;
 
 			uart1: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -740,7 +740,7 @@
 			ranges = <0x0 0x24000 0x1000>;
 
 			uart2: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1168,7 +1168,7 @@
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <4>;
 				ti,mbox-num-fifos = <8>;
-				mbox_wkupm3: wkup_m3 {
+				mbox_wkupm3: mbox-wkup-m3 {
 					ti,mbox-send-noirq;
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <0 0 3>;
@@ -1399,7 +1399,7 @@
 			ranges = <0x0 0xa6000 0x1000>;
 
 			uart3: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1427,7 +1427,7 @@
 			ranges = <0x0 0xa8000 0x1000>;
 
 			uart4: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1455,7 +1455,7 @@
 			ranges = <0x0 0xaa000 0x1000>;
 
 			uart5: serial@0 {
-				compatible = "ti,am4372-uart","ti,omap2-uart";
+				compatible = "ti,am4372-uart";
 				reg = <0x0 0x2000>;
 				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1595,7 +1595,7 @@
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
 				clocks = <&dcan1_fck>;
-				clock-name = "fck";
+				clock-names = "fck";
 				syscon-raminit = <&scm_conf 0x644 1>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1747,10 +1747,9 @@
 				ranges = <0 0 0x1000>;
 				status = "disabled";
 
-				ecap0: ecap@100 {
+				ecap0: pwm@100 {
 					compatible = "ti,am4372-ecap",
-						     "ti,am3352-ecap",
-						     "ti,am33xx-ecap";
+						     "ti,am3352-ecap";
 					#pwm-cells = <3>;
 					reg = <0x100 0x80>;
 					clocks = <&l4ls_gclk>;
@@ -1760,8 +1759,7 @@
 
 				ehrpwm0: pwm@200 {
 					compatible = "ti,am4372-ehrpwm",
-						     "ti,am3352-ehrpwm",
-						     "ti,am33xx-ehrpwm";
+						     "ti,am3352-ehrpwm";
 					#pwm-cells = <3>;
 					reg = <0x200 0x80>;
 					clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
@@ -1799,10 +1797,9 @@
 				ranges = <0 0 0x1000>;
 				status = "disabled";
 
-				ecap1: ecap@100 {
+				ecap1: pwm@100 {
 					compatible = "ti,am4372-ecap",
-						     "ti,am3352-ecap",
-						     "ti,am33xx-ecap";
+						     "ti,am3352-ecap";
 					#pwm-cells = <3>;
 					reg = <0x100 0x80>;
 					clocks = <&l4ls_gclk>;
@@ -1812,8 +1809,7 @@
 
 				ehrpwm1: pwm@200 {
 					compatible = "ti,am4372-ehrpwm",
-						     "ti,am3352-ehrpwm",
-						     "ti,am33xx-ehrpwm";
+						     "ti,am3352-ehrpwm";
 					#pwm-cells = <3>;
 					reg = <0x200 0x80>;
 					clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
@@ -1851,10 +1847,9 @@
 				ranges = <0 0 0x1000>;
 				status = "disabled";
 
-				ecap2: ecap@100 {
+				ecap2: pwm@100 {
 					compatible = "ti,am4372-ecap",
-						     "ti,am3352-ecap",
-						     "ti,am33xx-ecap";
+						     "ti,am3352-ecap";
 					#pwm-cells = <3>;
 					reg = <0x100 0x80>;
 					clocks = <&l4ls_gclk>;
@@ -1864,8 +1859,7 @@
 
 				ehrpwm2: pwm@200 {
 					compatible = "ti,am4372-ehrpwm",
-						     "ti,am3352-ehrpwm",
-						     "ti,am33xx-ehrpwm";
+						     "ti,am3352-ehrpwm";
 					#pwm-cells = <3>;
 					reg = <0x200 0x80>;
 					clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
@@ -1905,8 +1899,7 @@
 
 				ehrpwm3: pwm@200 {
 					compatible = "ti,am4372-ehrpwm",
-						     "ti,am3352-ehrpwm",
-						     "ti,am33xx-ehrpwm";
+						     "ti,am3352-ehrpwm";
 					#pwm-cells = <3>;
 					reg = <0x200 0x80>;
 					clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
@@ -1946,8 +1939,7 @@
 
 				ehrpwm4: pwm@48308200 {
 					compatible = "ti,am4372-ehrpwm",
-						     "ti,am3352-ehrpwm",
-						     "ti,am33xx-ehrpwm";
+						     "ti,am3352-ehrpwm";
 					#pwm-cells = <3>;
 					reg = <0x200 0x80>;
 					clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
@@ -1987,8 +1979,7 @@
 
 				ehrpwm5: pwm@200 {
 					compatible = "ti,am4372-ehrpwm",
-						     "ti,am3352-ehrpwm",
-						     "ti,am33xx-ehrpwm";
+						     "ti,am3352-ehrpwm";
 					#pwm-cells = <3>;
 					reg = <0x200 0x80>;
 					clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
@@ -2070,7 +2061,7 @@
 			};
 		};
 
-		target-module@22000 {			/* 0x48322000, ap 116 64.0 */
+		gpio5_target: target-module@22000 {		/* 0x48322000, ap 116 64.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x22000 0x4>,
 			      <0x22010 0x4>,
@@ -2387,11 +2378,38 @@
 		};
 
 		target-module@4c000 {			/* 0x4834c000, ap 114 72.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4c000 0x4>,
+			      <0x4c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3s_clkctrl AM4_L3S_ADC1_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x4c000 0x2000>;
+
+			magadc: magadc@0 {
+				compatible = "ti,am4372-magadc";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&adc_mag_fck>;
+				clock-names = "fck";
+				dmas = <&edma 54 0>, <&edma 55 0>;
+				dma-names = "fifo0", "fifo1";
+				status = "disabled";
+
+				mag {
+					compatible = "ti,am4372-mag";
+				};
+
+				adc {
+					#io-channel-cells = <1>;
+					compatible = "ti,am4372-adc";
+				};
+			};
 		};
 
 		target-module@80000 {			/* 0x48380000, ap 123 42.0 */
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 496ed34f7755..511a02e13e2c 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -746,7 +746,7 @@
 	pinctrl-0 = <&qspi_pins>;
 
 	spi-max-frequency = <48000000>;
-	m25p80@0 {
+	flash@0 {
 		compatible = "mx66l51235l";
 		spi-max-frequency = <48000000>;
 		reg = <0>;
@@ -763,7 +763,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 		partition@1 {
 			label = "QSPI.U_BOOT.backup";
@@ -892,3 +892,11 @@
 		};
 	};
 };
+
+&wkup_m3_ipc {
+	firmware-name = "am43x-evm-scale-data.bin";
+};
+
+&pruss1_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index f517d1e843cf..9fc915a2582e 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -11,7 +11,7 @@
 #include <dt-bindings/pinctrl/am43xx.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
+#include <dt-bindings/sound/tlv320aic31xx.h>
 
 / {
 	model = "TI AM43x EPOS EVM";
@@ -582,7 +582,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tps65218: tps65218@24 {
 		reg = <0x24>;
@@ -725,7 +725,7 @@
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
 
-	p1 {
+	sel-lcd-hdmi-hog {
 		/*
 		 * SelLCDorHDMI selects between display and audio paths:
 		 * Low: HDMI display with audio via HDMI
@@ -860,7 +860,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&spi0_pins_default>;
 	pinctrl-1 = <&spi0_pins_sleep>;
-	ti,pindir-d0-out-d1-in = <1>;
+	ti,pindir-d0-out-d1-in;
 };
 
 &spi1 {
@@ -868,7 +868,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&spi1_pins_default>;
 	pinctrl-1 = <&spi1_pins_sleep>;
-	ti,pindir-d0-out-d1-in = <1>;
+	ti,pindir-d0-out-d1-in;
 };
 
 &usb2_phy1 {
@@ -902,7 +902,7 @@
 	pinctrl-1 = <&qspi1_pins_sleep>;
 
 	spi-max-frequency = <48000000>;
-	m25p80@0 {
+	flash@0 {
 		compatible = "mx66l51235l";
 		spi-max-frequency = <48000000>;
 		reg = <0>;
@@ -919,7 +919,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 		partition@1 {
 			label = "QSPI.U_BOOT.backup";
@@ -1018,3 +1018,11 @@
 &cpu {
 	cpu0-supply = <&dcdc2>;
 };
+
+&wkup_m3_ipc {
+	firmware-name = "am43x-evm-scale-data.bin";
+};
+
+&pruss1_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index c726cd8dbdf1..9a5437b3d6a8 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -5,217 +5,246 @@
  * Copyright (C) 2013 Texas Instruments, Inc.
  */
 &scm_clocks {
-	sys_clkin_ck: sys_clkin_ck@40 {
+	sys_clkin_ck: clock-sys-clkin-31@40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sys_clkin_ck";
 		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
 		ti,bit-shift = <31>;
 		reg = <0x0040>;
 	};
 
-	crystal_freq_sel_ck: crystal_freq_sel_ck@40 {
+	crystal_freq_sel_ck: clock-crystal-freq-sel-29@40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "crystal_freq_sel_ck";
 		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
 		ti,bit-shift = <29>;
 		reg = <0x0040>;
 	};
 
-	sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
+	sysboot_freq_sel_ck: clock-sysboot-freq-sel-22@44e10040 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sysboot_freq_sel_ck";
 		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
 		ti,bit-shift = <22>;
 		reg = <0x0040>;
 	};
 
-	adc_tsc_fck: adc_tsc_fck {
+	adc_tsc_fck: clock-adc-tsc-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "adc_tsc_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dcan0_fck: dcan0_fck {
+	dcan0_fck: clock-dcan0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dcan0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dcan1_fck: dcan1_fck {
+	dcan1_fck: clock-dcan1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dcan1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	mcasp0_fck: mcasp0_fck {
+	mcasp0_fck: clock-mcasp0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mcasp0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	mcasp1_fck: mcasp1_fck {
+	mcasp1_fck: clock-mcasp1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mcasp1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	smartreflex0_fck: smartreflex0_fck {
+	smartreflex0_fck: clock-smartreflex0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "smartreflex0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	smartreflex1_fck: smartreflex1_fck {
+	smartreflex1_fck: clock-smartreflex1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "smartreflex1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	sha0_fck: sha0_fck {
+	sha0_fck: clock-sha0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "sha0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	aes0_fck: aes0_fck {
+	aes0_fck: clock-aes0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "aes0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	rng_fck: rng_fck {
+	rng_fck: clock-rng-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "rng_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	ehrpwm0_tbclk: ehrpwm0_tbclk@664 {
+	ehrpwm0_tbclk: clock-ehrpwm0-tbclk-0@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm0_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <0>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm1_tbclk: ehrpwm1_tbclk@664 {
+	ehrpwm1_tbclk: clock-ehrpwm1-tbclk-1@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm1_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <1>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm2_tbclk: ehrpwm2_tbclk@664 {
+	ehrpwm2_tbclk: clock-ehrpwm2-tbclk-2@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm2_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <2>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm3_tbclk: ehrpwm3_tbclk@664 {
+	ehrpwm3_tbclk: clock-ehrpwm3-tbclk-4@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm3_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <4>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm4_tbclk: ehrpwm4_tbclk@664 {
+	ehrpwm4_tbclk: clock-ehrpwm4-tbclk-5@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm4_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <5>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm5_tbclk: ehrpwm5_tbclk@664 {
+	ehrpwm5_tbclk: clock-ehrpwm5-tbclk-6@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm5_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <6>;
 		reg = <0x0664>;
 	};
 };
 &prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
+	clk_32768_ck: clock-clk-32768 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_32768_ck";
 		clock-frequency = <32768>;
 	};
 
-	clk_rc32k_ck: clk_rc32k_ck {
+	clk_rc32k_ck: clock-clk-rc32k {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_rc32k_ck";
 		clock-frequency = <32768>;
 	};
 
-	virt_19200000_ck: virt_19200000_ck {
+	virt_19200000_ck: clock-virt-19200000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_19200000_ck";
 		clock-frequency = <19200000>;
 	};
 
-	virt_24000000_ck: virt_24000000_ck {
+	virt_24000000_ck: clock-virt-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_24000000_ck";
 		clock-frequency = <24000000>;
 	};
 
-	virt_25000000_ck: virt_25000000_ck {
+	virt_25000000_ck: clock-virt-25000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_25000000_ck";
 		clock-frequency = <25000000>;
 	};
 
-	virt_26000000_ck: virt_26000000_ck {
+	virt_26000000_ck: clock-virt-26000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_26000000_ck";
 		clock-frequency = <26000000>;
 	};
 
-	tclkin_ck: tclkin_ck {
+	tclkin_ck: clock-tclkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "tclkin_ck";
 		clock-frequency = <26000000>;
 	};
 
-	dpll_core_ck: dpll_core_ck@2d20 {
+	dpll_core_ck: clock@2d20 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-core-clock";
+		clock-output-names = "dpll_core_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
+		reg = <0x2d20>, <0x2d24>, <0x2d2c>, <0x2d48>, <0x2d4c>;
 	};
 
-	dpll_core_x2_ck: dpll_core_x2_ck {
+	dpll_core_x2_ck: clock-dpll-core-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-x2-clock";
+		clock-output-names = "dpll_core_x2_ck";
 		clocks = <&dpll_core_ck>;
 	};
 
-	dpll_core_m4_ck: dpll_core_m4_ck@2d38 {
+	dpll_core_m4_ck: clock-dpll-core-m4-8@2d38 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m4_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -224,9 +253,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_m5_ck: dpll_core_m5_ck@2d3c {
+	dpll_core_m5_ck: clock-dpll-core-m5-8@2d3c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m5_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -235,9 +265,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_m6_ck: dpll_core_m6_ck@2d40 {
+	dpll_core_m6_ck: clock-dpll-core-m6-8@2d40 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m6_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -246,16 +277,18 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_mpu_ck: dpll_mpu_ck@2d60 {
+	dpll_mpu_ck: clock@2d60 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
+		clock-output-names = "dpll_mpu_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
+		reg = <0x2d60>, <0x2d64>, <0x2d6c>, <0x2d88>, <0x2d8c>;
 	};
 
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 {
+	dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@2d70 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_mpu_m2_ck";
 		clocks = <&dpll_mpu_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -264,24 +297,27 @@
 		ti,invert-autoidle-bit;
 	};
 
-	mpu_periphclk: mpu_periphclk {
+	mpu_periphclk: clock-mpu-periphclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mpu_periphclk";
 		clocks = <&dpll_mpu_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	dpll_ddr_ck: dpll_ddr_ck@2da0 {
+	dpll_ddr_ck: clock@2da0 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
+		clock-output-names = "dpll_ddr_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2da0>, <0x2da4>, <0x2dac>;
+		reg = <0x2da0>, <0x2da4>, <0x2dac>, <0x2dc8>, <0x2dcc>;
 	};
 
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 {
+	dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@2db0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_ddr_m2_ck";
 		clocks = <&dpll_ddr_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -290,16 +326,18 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_disp_ck: dpll_disp_ck@2e20 {
+	dpll_disp_ck: clock@2e20 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
+		clock-output-names = "dpll_disp_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
+		reg = <0x2e20>, <0x2e24>, <0x2e2c>, <0x2e48>, <0x2e4c>;
 	};
 
-	dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 {
+	dpll_disp_m2_ck: clock-dpll-disp-m2-8@2e30 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_disp_m2_ck";
 		clocks = <&dpll_disp_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -309,16 +347,18 @@
 		ti,set-rate-parent;
 	};
 
-	dpll_per_ck: dpll_per_ck@2de0 {
+	dpll_per_ck: clock@2de0 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-j-type-clock";
+		clock-output-names = "dpll_per_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2de0>, <0x2de4>, <0x2dec>;
+		reg = <0x2de0>, <0x2de4>, <0x2dec>, <0x2e08>, <0x2e0c>;
 	};
 
-	dpll_per_m2_ck: dpll_per_m2_ck@2df0 {
+	dpll_per_m2_ck: clock-dpll-per-m2-8@2df0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2_ck";
 		clocks = <&dpll_per_ck>;
 		ti,max-div = <127>;
 		ti,autoidle-shift = <8>;
@@ -327,242 +367,281 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+	dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_per_m2_div4_wkupdm_ck";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+	dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_per_m2_div4_ck";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	clk_24mhz: clk_24mhz {
+	clk_24mhz: clock-clk-24mhz {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "clk_24mhz";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <8>;
 	};
 
-	clkdiv32k_ck: clkdiv32k_ck {
+	clkdiv32k_ck: clock-clkdiv32k {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "clkdiv32k_ck";
 		clocks = <&clk_24mhz>;
 		clock-mult = <1>;
 		clock-div = <732>;
 	};
 
-	clkdiv32k_ick: clkdiv32k_ick@2a38 {
+	clkdiv32k_ick: clock-clkdiv32k-ick-8@2a38 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "clkdiv32k_ick";
 		clocks = <&clkdiv32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x2a38>;
 	};
 
-	sysclk_div: sysclk_div {
+	sysclk_div: clock-sysclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "sysclk_div";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	pruss_ocp_gclk: pruss_ocp_gclk@4248 {
+	pruss_ocp_gclk: clock-pruss-ocp-gclk@4248 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "pruss_ocp_gclk";
 		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
 		reg = <0x4248>;
 	};
 
-	clk_32k_tpm_ck: clk_32k_tpm_ck {
+	clk_32k_tpm_ck: clock-clk-32k-tpm {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_32k_tpm_ck";
 		clock-frequency = <32768>;
 	};
 
-	timer1_fck: timer1_fck@4200 {
+	timer1_fck: clock-timer1-fck@4200 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer1_fck";
 		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
 		reg = <0x4200>;
 	};
 
-	timer2_fck: timer2_fck@4204 {
+	timer2_fck: clock-timer2-fck@4204 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer2_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4204>;
 	};
 
-	timer3_fck: timer3_fck@4208 {
+	timer3_fck: clock-timer3-fck@4208 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer3_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4208>;
 	};
 
-	timer4_fck: timer4_fck@420c {
+	timer4_fck: clock-timer4-fck@420c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer4_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x420c>;
 	};
 
-	timer5_fck: timer5_fck@4210 {
+	timer5_fck: clock-timer5-fck@4210 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer5_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4210>;
 	};
 
-	timer6_fck: timer6_fck@4214 {
+	timer6_fck: clock-timer6-fck@4214 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer6_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4214>;
 	};
 
-	timer7_fck: timer7_fck@4218 {
+	timer7_fck: clock-timer7-fck@4218 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer7_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4218>;
 	};
 
-	wdt1_fck: wdt1_fck@422c {
+	wdt1_fck: clock-wdt1-fck@422c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "wdt1_fck";
 		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
 		reg = <0x422c>;
 	};
 
-	l3_gclk: l3_gclk {
+	adc_mag_fck: adc_mag_fck@424c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_per_m2_ck>;
+		reg = <0x424c>;
+	};
+
+	l3_gclk: clock-l3-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l3_gclk";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+	dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_core_m4_div2_ck";
 		clocks = <&sysclk_div>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	l4hs_gclk: l4hs_gclk {
+	l4hs_gclk: clock-l4hs-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4hs_gclk";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l3s_gclk: l3s_gclk {
+	l3s_gclk: clock-l3s-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l3s_gclk";
 		clocks = <&dpll_core_m4_div2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l4ls_gclk: l4ls_gclk {
+	l4ls_gclk: clock-l4ls-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4ls_gclk";
 		clocks = <&dpll_core_m4_div2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+	cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "cpsw_125mhz_gclk";
 		clocks = <&dpll_core_m5_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@4238 {
+	cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@4238 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "cpsw_cpts_rft_clk";
 		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
 		reg = <0x4238>;
 	};
 
-	dpll_clksel_mac_clk: dpll_clksel_mac_clk@4234 {
+	dpll_clksel_mac_clk: clock-dpll-clksel-mac-2@4234 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_clksel_mac_clk";
 		clocks = <&dpll_core_m5_ck>;
 		reg = <0x4234>;
 		ti,bit-shift = <2>;
 		ti,dividers = <2>, <5>;
 	};
 
-	clk_32k_mosc_ck: clk_32k_mosc_ck {
+	clk_32k_mosc_ck: clock-clk-32k-mosc {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_32k_mosc_ck";
 		clock-frequency = <32768>;
 	};
 
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@4240 {
+	gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@4240 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gpio0_dbclk_mux_ck";
 		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
 		reg = <0x4240>;
 	};
 
-	mmc_clk: mmc_clk {
+	mmc_clk: clock-mmc {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mmc_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@423c {
+	gfx_fclk_clksel_ck: clock-gfx-fclk-clksel-1@423c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gfx_fclk_clksel_ck";
 		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x423c>;
 	};
 
-	gfx_fck_div_ck: gfx_fck_div_ck@423c {
+	gfx_fck_div_ck: clock-gfx-fck-div@423c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "gfx_fck_div_ck";
 		clocks = <&gfx_fclk_clksel_ck>;
 		reg = <0x423c>;
 		ti,max-div = <2>;
 	};
 
-	disp_clk: disp_clk@4244 {
+	disp_clk: clock-disp@4244 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "disp_clk";
 		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
 		reg = <0x4244>;
 		ti,set-rate-parent;
 	};
 
-	dpll_extdev_ck: dpll_extdev_ck@2e60 {
+	dpll_extdev_ck: clock@2e60 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
+		clock-output-names = "dpll_extdev_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
+		reg = <0x2e60>, <0x2e64>, <0x2e6c>, <0x2e88>, <0x2e8c>;
 	};
 
-	dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 {
+	dpll_extdev_m2_ck: clock-dpll-extdev-m2-8@2e70 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_extdev_m2_ck";
 		clocks = <&dpll_extdev_ck>;
 		ti,max-div = <127>;
 		ti,autoidle-shift = <8>;
@@ -571,66 +650,75 @@
 		ti,invert-autoidle-bit;
 	};
 
-	mux_synctimer32k_ck: mux_synctimer32k_ck@4230 {
+	mux_synctimer32k_ck: clock-mux-synctimer32k@4230 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "mux_synctimer32k_ck";
 		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
 		reg = <0x4230>;
 	};
 
-	timer8_fck: timer8_fck@421c {
+	timer8_fck: clock-timer8-fck@421c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer8_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
 		reg = <0x421c>;
 	};
 
-	timer9_fck: timer9_fck@4220 {
+	timer9_fck: clock-timer9-fck@4220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer9_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
 		reg = <0x4220>;
 	};
 
-	timer10_fck: timer10_fck@4224 {
+	timer10_fck: clock-timer10-fck@4224 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer10_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
 		reg = <0x4224>;
 	};
 
-	timer11_fck: timer11_fck@4228 {
+	timer11_fck: clock-timer11-fck@4228 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer11_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
 		reg = <0x4228>;
 	};
 
-	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
+	cpsw_50m_clkdiv: clock-cpsw-50m-clkdiv {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "cpsw_50m_clkdiv";
 		clocks = <&dpll_core_m5_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
+	cpsw_5m_clkdiv: clock-cpsw-5m-clkdiv {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "cpsw_5m_clkdiv";
 		clocks = <&cpsw_50m_clkdiv>;
 		clock-mult = <1>;
 		clock-div = <10>;
 	};
 
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+	dpll_ddr_x2_ck: clock-dpll-ddr-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-x2-clock";
+		clock-output-names = "dpll_ddr_x2_ck";
 		clocks = <&dpll_ddr_ck>;
 	};
 
-	dpll_ddr_m4_ck: dpll_ddr_m4_ck@2db8 {
+	dpll_ddr_m4_ck: clock-dpll-ddr-m4-8@2db8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_ddr_m4_ck";
 		clocks = <&dpll_ddr_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -639,9 +727,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_clkdcoldo: dpll_per_clkdcoldo@2e14 {
+	dpll_per_clkdcoldo: clock-dpll-per-clkdcoldo-8@2e14 {
 		#clock-cells = <0>;
 		compatible = "ti,fixed-factor-clock";
+		clock-output-names = "dpll_per_clkdcoldo";
 		clocks = <&dpll_per_ck>;
 		ti,clock-mult = <1>;
 		ti,clock-div = <1>;
@@ -650,91 +739,102 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dll_aging_clk_div: dll_aging_clk_div@4250 {
+	dll_aging_clk_div: clock-dll-aging-clk-div@4250 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dll_aging_clk_div";
 		clocks = <&sys_clkin_ck>;
 		reg = <0x4250>;
 		ti,dividers = <8>, <16>, <32>;
 	};
 
-	div_core_25m_ck: div_core_25m_ck {
+	div_core_25m_ck: clock-div-core-25m {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "div_core_25m_ck";
 		clocks = <&sysclk_div>;
 		clock-mult = <1>;
 		clock-div = <8>;
 	};
 
-	func_12m_clk: func_12m_clk {
+	func_12m_clk: clock-func-12m {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_12m_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <16>;
 	};
 
-	vtp_clk_div: vtp_clk_div {
+	vtp_clk_div: clock-vtp-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "vtp_clk_div";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	usbphy_32khz_clkmux: usbphy_32khz_clkmux@4260 {
+	usbphy_32khz_clkmux: clock-usbphy-32khz-clkmux@4260 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "usbphy_32khz_clkmux";
 		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
 		reg = <0x4260>;
 	};
 
-	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k@2a40 {
+	usb_phy0_always_on_clk32k: clock-usb-phy0-always-on-clk32k-8@2a40 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy0_always_on_clk32k";
 		clocks = <&usbphy_32khz_clkmux>;
 		ti,bit-shift = <8>;
 		reg = <0x2a40>;
 	};
 
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 {
+	usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@2a48 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy1_always_on_clk32k";
 		clocks = <&usbphy_32khz_clkmux>;
 		ti,bit-shift = <8>;
 		reg = <0x2a48>;
 	};
 
-	clkout1_osc_div_ck: clkout1-osc-div-ck {
+	clkout1_osc_div_ck: clock-clkout1-osc-div-ck {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "clkout1_osc_div_ck";
 		clocks = <&sys_clkin_ck>;
 		ti,bit-shift = <20>;
 		ti,max-div = <4>;
 		reg = <0x4100>;
 	};
 
-	clkout1_src2_mux_ck: clkout1-src2-mux-ck {
+	clkout1_src2_mux_ck: clock-clkout1-src2-mux-ck {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "clkout1_src2_mux_ck";
 		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
 			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
 			 <&dpll_mpu_m2_ck>;
 		reg = <0x4100>;
 	};
 
-	clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck {
+	clkout1_src2_pre_div_ck: clock-clkout1-src2-pre-div-ck {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "clkout1_src2_pre_div_ck";
 		clocks = <&clkout1_src2_mux_ck>;
 		ti,bit-shift = <4>;
 		ti,max-div = <8>;
 		reg = <0x4100>;
 	};
 
-	clkout1_src2_post_div_ck: clkout1-src2-post-div-ck {
+	clkout1_src2_post_div_ck: clock-clkout1-src2-post-div-ck {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "clkout1_src2_post_div_ck";
 		clocks = <&clkout1_src2_pre_div_ck>;
 		ti,bit-shift = <8>;
 		ti,max-div = <32>;
@@ -742,18 +842,20 @@
 		reg = <0x4100>;
 	};
 
-	clkout1_mux_ck: clkout1-mux-ck {
+	clkout1_mux_ck: clock-clkout1-mux-ck {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "clkout1_mux_ck";
 		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
 			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
 		ti,bit-shift = <16>;
 		reg = <0x4100>;
 	};
 
-	clkout1_ck: clkout1-ck {
+	clkout1_ck: clock-clkout1-ck {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "clkout1_ck";
 		clocks = <&clkout1_mux_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x4100>;
@@ -761,120 +863,138 @@
 };
 
 &prcm {
-	wkup_cm: wkup-cm@2800 {
+	wkup_cm: clock@2800 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "wkup_cm";
 		reg = <0x2800 0x400>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x2800 0x400>;
 
-		l3s_tsc_clkctrl: l3s-tsc-clkctrl@120 {
+		l3s_tsc_clkctrl: clock@120 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3s_tsc_clkctrl";
 			reg = <0x120 0x4>;
 			#clock-cells = <2>;
 		};
 
-		l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@228 {
+		l4_wkup_aon_clkctrl: clock@228 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_wkup_aon_clkctrl";
 			reg = <0x228 0xc>;
 			#clock-cells = <2>;
 		};
 
-		l4_wkup_clkctrl: l4-wkup-clkctrl@220 {
+		l4_wkup_clkctrl: clock@220 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_wkup_clkctrl";
 			reg = <0x220 0x4>, <0x328 0x44>;
 			#clock-cells = <2>;
 		};
 
 	};
 
-	mpu_cm: mpu-cm@8300 {
+	mpu_cm: clock@8300 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "mpu_cm";
 		reg = <0x8300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x8300 0x100>;
 
-		mpu_clkctrl: mpu-clkctrl@20 {
+		mpu_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "mpu_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	gfx_l3_cm: gfx-l3-cm@8400 {
+	gfx_l3_cm: clock@8400 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "gfx_l3_cm";
 		reg = <0x8400 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x8400 0x100>;
 
-		gfx_l3_clkctrl: gfx-l3-clkctrl@20 {
+		gfx_l3_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "gfx_l3_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l4_rtc_cm: l4-rtc-cm@8500 {
+	l4_rtc_cm: clock@8500 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_rtc_cm";
 		reg = <0x8500 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x8500 0x100>;
 
-		l4_rtc_clkctrl: l4-rtc-clkctrl@20 {
+		l4_rtc_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_rtc_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	per_cm: per-cm@8800 {
+	per_cm: clock@8800 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "per_cm";
 		reg = <0x8800 0xc00>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x8800 0xc00>;
 
-		l3_clkctrl: l3-clkctrl@20 {
+		l3_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_clkctrl";
 			reg = <0x20 0x3c>, <0x78 0x2c>;
 			#clock-cells = <2>;
 		};
 
-		l3s_clkctrl: l3s-clkctrl@68 {
+		l3s_clkctrl: clock@68 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3s_clkctrl";
 			reg = <0x68 0xc>, <0x220 0x4c>;
 			#clock-cells = <2>;
 		};
 
-		pruss_ocp_clkctrl: pruss-ocp-clkctrl@320 {
+		pruss_ocp_clkctrl: clock@320 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "pruss_ocp_clkctrl";
 			reg = <0x320 0x4>;
 			#clock-cells = <2>;
 		};
 
-		l4ls_clkctrl: l4ls-clkctrl@420 {
+		l4ls_clkctrl: clock@420 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4ls_clkctrl";
 			reg = <0x420 0x1a4>;
 			#clock-cells = <2>;
 		};
 
-		emif_clkctrl: emif-clkctrl@720 {
+		emif_clkctrl: clock@720 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "emif_clkctrl";
 			reg = <0x720 0x4>;
 			#clock-cells = <2>;
 		};
 
-		dss_clkctrl: dss-clkctrl@a20 {
+		dss_clkctrl: clock@a20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "dss_clkctrl";
 			reg = <0xa20 0x4>;
 			#clock-cells = <2>;
 		};
 
-		cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@b20 {
+		cpsw_125mhz_clkctrl: clock@b20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "cpsw_125mhz_clkctrl";
 			reg = <0xb20 0x4>;
 			#clock-cells = <2>;
 		};
diff --git a/arch/arm/boot/dts/am57-pruss.dtsi b/arch/arm/boot/dts/am57-pruss.dtsi
index 032c1acfcda3..46c5383f0eee 100644
--- a/arch/arm/boot/dts/am57-pruss.dtsi
+++ b/arch/arm/boot/dts/am57-pruss.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Common PRUSS data for TI AM57xx platforms
  */
@@ -25,6 +25,94 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x4b200000 0x80000>;
+
+		pruss1: pruss@0 {
+			compatible = "ti,am5728-pruss";
+			reg = <0x0 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pruss1_mem: memories@0 {
+				reg = <0x0 0x2000>,
+				      <0x2000 0x2000>,
+				      <0x10000 0x8000>;
+				reg-names = "dram0", "dram1",
+					    "shrdram2";
+			};
+
+			pruss1_cfg: cfg@26000 {
+				compatible = "ti,pruss-cfg", "syscon";
+				reg = <0x26000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x26000 0x2000>;
+
+				clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pruss1_iepclk_mux: iepclk-mux@30 {
+						reg = <0x30>;
+						#clock-cells = <0>;
+						clocks = <&dpll_gmac_m3x2_ck>,  /* icss_iep_clk */
+							 <&dpll_gmac_h13x2_ck>; /* icss_clk */
+					};
+				};
+			};
+
+			pruss1_mii_rt: mii-rt@32000 {
+				compatible = "ti,pruss-mii", "syscon";
+				reg = <0x32000 0x58>;
+			};
+
+			pruss1_intc: interrupt-controller@20000 {
+				compatible = "ti,pruss-intc";
+				reg = <0x20000 0x2000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "host_intr0", "host_intr1",
+						  "host_intr2", "host_intr3",
+						  "host_intr4", "host_intr5",
+						  "host_intr6", "host_intr7";
+			};
+
+			pru1_0: pru@34000 {
+				compatible = "ti,am5728-pru";
+				reg = <0x34000 0x3000>,
+				      <0x22000 0x400>,
+				      <0x22400 0x100>;
+				reg-names = "iram", "control", "debug";
+				firmware-name = "am57xx-pru1_0-fw";
+			};
+
+			pru1_1: pru@38000 {
+				compatible = "ti,am5728-pru";
+				reg = <0x38000 0x3000>,
+				      <0x24000 0x400>,
+				      <0x24400 0x100>;
+				reg-names = "iram", "control", "debug";
+				firmware-name = "am57xx-pru1_1-fw";
+			};
+
+			pruss1_mdio: mdio@32400 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&dpll_gmac_h13x2_ck>;
+				clock-names = "fck";
+				bus_freq = <1000000>;
+				reg = <0x32400 0x90>;
+			};
+		};
 	};
 
 	pruss2_tm: target-module@4b2a6000 {
@@ -46,5 +134,93 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x4b280000 0x80000>;
+
+		pruss2: pruss@0 {
+			compatible = "ti,am5728-pruss";
+			reg = <0x0 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pruss2_mem: memories@0 {
+				reg = <0x0 0x2000>,
+				      <0x2000 0x2000>,
+				      <0x10000 0x8000>;
+				reg-names = "dram0", "dram1",
+					    "shrdram2";
+			};
+
+			pruss2_cfg: cfg@26000 {
+				compatible = "ti,pruss-cfg", "syscon";
+				reg = <0x26000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x26000 0x2000>;
+
+				clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pruss2_iepclk_mux: iepclk-mux@30 {
+						reg = <0x30>;
+						#clock-cells = <0>;
+						clocks = <&dpll_gmac_m3x2_ck>,  /* icss_iep_clk */
+							 <&dpll_gmac_h13x2_ck>; /* icss_clk */
+					};
+				};
+			};
+
+			pruss2_mii_rt: mii-rt@32000 {
+				compatible = "ti,pruss-mii", "syscon";
+				reg = <0x32000 0x58>;
+			};
+
+			pruss2_intc: interrupt-controller@20000 {
+				compatible = "ti,pruss-intc";
+				reg = <0x20000 0x2000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "host_intr0", "host_intr1",
+						  "host_intr2", "host_intr3",
+						  "host_intr4", "host_intr5",
+						  "host_intr6", "host_intr7";
+			};
+
+			pru2_0: pru@34000 {
+				compatible = "ti,am5728-pru";
+				reg = <0x34000 0x3000>,
+				      <0x22000 0x400>,
+				      <0x22400 0x100>;
+				reg-names = "iram", "control", "debug";
+				firmware-name = "am57xx-pru2_0-fw";
+			};
+
+			pru2_1: pru@38000 {
+				compatible = "ti,am5728-pru";
+				reg = <0x38000 0x3000>,
+				      <0x24000 0x400>,
+				      <0x24400 0x100>;
+				reg-names = "iram", "control", "debug";
+				firmware-name = "am57xx-pru2_1-fw";
+			};
+
+			pruss2_mdio: mdio@32400 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&dpll_gmac_h13x2_ck>;
+				clock-names = "fck";
+				bus_freq = <1000000>;
+				reg = <0x32400 0x90>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi
index ebf4d3cc1cfb..6d7530a48c73 100644
--- a/arch/arm/boot/dts/am5718.dtsi
+++ b/arch/arm/boot/dts/am5718.dtsi
@@ -17,17 +17,13 @@
  * VCP1, VCP2
  * MLB
  * ISS
- * USB3, USB4
+ * USB3
  */
 
 &usb3_tm {
 	status = "disabled";
 };
 
-&usb4_tm {
-	status = "disabled";
-};
-
 &atl_tm {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/am571x-idk-touchscreen.dtso b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso
new file mode 100644
index 000000000000..c051ee6c1130
--- /dev/null
+++ b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen: edt-ft5506@38 {
+		compatible = "edt,edt-ft5506", "edt,edt-ft5x06";
+
+		reg = <0x38>;
+
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+
+		/* GPIO line is inverted before going to touch panel */
+		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+
+		touchscreen-size-x = <1920>;
+		touchscreen-size-y = <1200>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index e81078c2d00d..48425020281a 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -208,3 +208,11 @@
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
 };
+
+&pruss1_mdio {
+	status = "disabled";
+};
+
+&pruss2_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am572x-idk-touchscreen.dtso b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso
new file mode 100644
index 000000000000..573e932b1239
--- /dev/null
+++ b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen: edt-ft5506@38 {
+		compatible = "edt,edt-ft5506", "edt,edt-ft5x06";
+
+		reg = <0x38>;
+
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+
+		/* GPIO line is inverted before going to touch panel */
+		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+
+		touchscreen-size-x = <1920>;
+		touchscreen-size-y = <1200>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 6504265f3f7e..94a738cb0a4d 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -27,3 +27,11 @@
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
 };
+
+&pruss1_mdio {
+	status = "disabled";
+};
+
+&pruss2_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi
index 2cb577432766..a1f029e9d1f3 100644
--- a/arch/arm/boot/dts/am5748.dtsi
+++ b/arch/arm/boot/dts/am5748.dtsi
@@ -3,7 +3,7 @@
  * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
-#include "dra76x.dtsi"
+#include "dra74x-p.dtsi"
 #include "am57-pruss.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index 1b8f3a28af05..47b9174d2353 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -18,7 +18,7 @@
 
 &qspi {
 	spi-max-frequency = <96000000>;
-	m25p80@0 {
+	flash@0 {
 		spi-max-frequency = <96000000>;
 	};
 };
@@ -36,10 +36,14 @@
 	pinctrl-2 = <&mmc2_pins_default>;
 };
 
-&m_can0 {
+&emif1 {
+	status = "okay";
+};
+
+&pruss1_mdio {
 	status = "disabled";
 };
 
-&emif1 {
-	status = "okay";
+&pruss2_mdio {
+	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index 6b82ecf803c5..994e69ab38d7 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -637,3 +637,11 @@
 	status = "okay";
 	memory-region = <&dsp2_memory_region>;
 };
+
+&pruss1_mdio {
+	status = "disabled";
+};
+
+&pruss2_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 0d5fe2bfb683..2fc9a5d5e0c0 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -454,20 +454,20 @@
 
 &mailbox5 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		status = "okay";
 	};
 };
 
 &mailbox6 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		status = "okay";
 	};
 };
@@ -491,7 +491,7 @@
 
 	spi-max-frequency = <48000000>;
 
-	spi_flash: spi_flash@0 {
+	spi_flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "spansion,m25p80", "jedec,spi-nor";
@@ -610,12 +610,19 @@
 	>;
 };
 
-&gpio3 {
-	status = "okay";
+&gpio3_target {
 	ti,no-reset-on-init;
 };
 
-&gpio2 {
+&gpio2_target {
 	status = "okay";
 	ti,no-reset-on-init;
 };
+
+&pruss1_mdio {
+	status = "disabled";
+};
+
+&pruss2_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am57xx-evm.dtso b/arch/arm/boot/dts/am57xx-evm.dtso
new file mode 100644
index 000000000000..12385a31061e
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-evm.dtso
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DT overlay for AM57xx GP EVM boards
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+&{/} {
+	compatible = "ti,am5728-evm", "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+	model = "TI AM5728 EVM";
+
+	aliases {
+		display0 = "/display";
+		display1 = "/connector"; // Fixme: &lcd0 and &hdmi0 could be
+					 // resolved here correcly based on
+					 // information in the base dtb symbol
+					 // table with a fix in dtc
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-user1 {
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			label = "USER1";
+			linux,code = <BTN_1>;
+		};
+
+		button-user2 {
+			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+			label = "USER2";
+			linux,code = <BTN_2>;
+		};
+
+		button-user3 {
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			label = "USER3";
+			linux,code = <BTN_3>;
+		};
+
+		button-user4 {
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+			label = "USER4";
+			linux,code = <BTN_4>;
+		};
+
+		button-user5 {
+			gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+			label = "USER5";
+			linux,code = <BTN_5>;
+		};
+	};
+
+	lcd0: display {
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
+		backlight = <&lcd_bl>;
+		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		label = "lcd";
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 243 245 247 249 251 252 253 255>;
+		default-brightness-level = <8>;
+		pwms = <&ehrpwm1 0 50000 0>;
+	};
+};
+
+&ehrpwm1 {
+	status = "okay";
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		attb-gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x5c>;
+		reset-gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&dss {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			dpi_out: endpoint {
+				data-lines = <24>;
+				remote-endpoint = <&lcd_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 9fcb8944aa3e..7f092a8811e8 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -526,7 +526,7 @@
 	status = "okay";
 
 	spi-max-frequency = <76800000>;
-	m25p80@0 {
+	flash@0 {
 		compatible = "s25fl256s1", "jedec,spi-nor";
 		spi-max-frequency = <76800000>;
 		reg = <0>;
@@ -542,7 +542,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.SPL";
-			reg = <0x00000000 0x000040000>;
+			reg = <0x00000000 0x00040000>;
 		};
 		partition@1 {
 			label = "QSPI.u-boot";
diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso
new file mode 100644
index 000000000000..25d74e9f3c9e
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	aliases {
+		display0 = "/display";
+		display1 = "/connector";
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 1>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+};
+
+&dsi_bridge {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	lcd: display {
+		compatible = "osddisplays,osd101t2045-53ts";
+		reg = <0>;
+
+		label = "lcd";
+
+		backlight = <&lcd_bl>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_bridge_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@1 {
+		reg = <1>;
+		dsi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+		};
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso
new file mode 100644
index 000000000000..8cea7ba32487
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&{/} {
+	aliases {
+		display0 = "/display";
+		display1 = "/connector";
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 1>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+};
+
+&dsi_bridge {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	lcd: display {
+		compatible = "osddisplays,osd101t2587-53ts";
+		reg = <0>;
+
+		label = "lcd";
+
+		backlight = <&lcd_bl>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_bridge_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@1 {
+		reg = <1>;
+		dsi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+		};
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 7da718abbd85..29936bfbeeb7 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -168,26 +168,24 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		keyswitch_in {
+		key-switch-in {
 			label = "keyswitch_in";
 			gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <28>;
 			wakeup-source;
 		};
 
-		error_in {
+		key-error-in {
 			label = "error_in";
 			gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <29>;
 			wakeup-source;
 		};
 
-		btn {
+		key-s {
 			label = "btn";
 			gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
 			linux,code = <31>;
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index a534a8e444d9..fbb2258b451f 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -148,7 +148,7 @@
 	usb: usb@4f000000 {
 		compatible = "nxp,usb-isp1761";
 		reg = <0x4f000000 0x20000>;
-		port1-otg;
+		dr_mode = "peripheral";
 	};
 
 	bridge {
@@ -198,96 +198,112 @@
 		syscon: syscon@10000000 {
 			compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
-			oscclk0: osc0@0c {
+			oscclk0: clock-controller@c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x0C>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk1: osc1@10 {
+			oscclk1: clock-controller@10 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x10>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk2: osc2@14 {
+			oscclk2: clock-controller@14 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x14>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk3: osc3@18 {
+			oscclk3: clock-controller@18 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x18>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk4: osc4@1c {
+			oscclk4: clock-controller@1c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x1c>;
@@ -383,7 +399,7 @@
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		wdog: watchdog@10010000 {
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index f925782f8560..efed325af88d 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -166,7 +166,7 @@
 		reg = <0x3b000000 0x20000>;
 		interrupt-parent = <&intc_fpga1176>;
 		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-		port1-otg;
+		dr_mode = "peripheral";
 	};
 
 	bridge {
@@ -216,96 +216,112 @@
 		syscon: syscon@10000000 {
 			compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
-			oscclk0: osc0@0c {
+			oscclk0: clock-controller@c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x0C>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk1: osc1@10 {
+			oscclk1: clock-controller@10 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x10>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk2: osc2@14 {
+			oscclk2: clock-controller@14 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x14>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk3: osc3@18 {
+			oscclk3: clock-controller@18 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x18>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk4: osc4@1c {
+			oscclk4: clock-controller@1c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x1c>;
@@ -394,7 +410,7 @@
 			interrupt-parent = <&intc_dc1176>;
 			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		pb1176_serial0: serial@1010c000 {
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index 0c7dabef4a5f..89103d54ecc1 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -303,114 +303,132 @@
 		pb11mp_syscon: syscon@10000000 {
 			compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				linux,default-trigger = "cpu1";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				linux,default-trigger = "cpu2";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				linux,default-trigger = "cpu3";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
 
-			oscclk0: osc0@0c {
+			oscclk0: clock-controller@c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x0C>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk1: osc1@10 {
+			oscclk1: clock-controller@10 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x10>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk2: osc2@14 {
+			oscclk2: clock-controller@14 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x14>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk3: osc3@18 {
+			oscclk3: clock-controller@18 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x18>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk4: osc4@1c {
+			oscclk4: clock-controller@1c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x1c>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk5: osc5@d4 {
+			oscclk5: clock-controller@d4 {
 				compatible = "arm,syscon-icst307";
+				reg = <0xd4 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0xd4>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk6: osc6@d8 {
+			oscclk6: clock-controller@d8 {
 				compatible = "arm,syscon-icst307";
+				reg = <0xd8 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0xd8>;
@@ -537,7 +555,7 @@
 			interrupt-parent = <&intc_pb11mp>;
 			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		watchdog@1000f000 {
@@ -712,7 +730,7 @@
 			reg = <0x4f000000 0x20000>;
 			interrupt-parent = <&intc_tc11mp>;
 			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
-			port1-otg;
+			dr_mode = "peripheral";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index ac95667ed781..ec1507c5147c 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -164,7 +164,7 @@
 	usb: usb@4f000000 {
 		compatible = "nxp,usb-isp1761";
 		reg = <0x4f000000 0x20000>;
-		port1-otg;
+		dr_mode = "peripheral";
 	};
 
 	bridge {
@@ -220,96 +220,112 @@
 		syscon: syscon@10000000 {
 			compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
-			oscclk0: osc0@0c {
+			oscclk0: clock-controller@c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x0C>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk1: osc1@10 {
+			oscclk1: clock-controller@10 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x10>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk2: osc2@14 {
+			oscclk2: clock-controller@14 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x14>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk3: osc3@18 {
+			oscclk3: clock-controller@18 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x18>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk4: osc4@1c {
+			oscclk4: clock-controller@1c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x1c>;
@@ -374,7 +390,7 @@
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		wdog0: watchdog@1000f000 {
diff --git a/arch/arm/boot/dts/armada-370-c200-v2.dts b/arch/arm/boot/dts/armada-370-c200-v2.dts
new file mode 100644
index 000000000000..84d40e1d70ef
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-c200-v2.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Ctera C200-V2
+ *
+ * Copyright (C) 2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Ctera C200 V2";
+	compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1024 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+	};
+
+	thermal-zones {
+		ethphy-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&ethphy0>;
+
+			trips {
+				ethphy_alert1: trip1 {
+					temperature = <65000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+
+				ethphy_crit: trip2 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pinctrl-0 = <&pmx_beeper>;
+		pinctrl-names = "default";
+		pwms = <&gpio1 31 4000>;
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		button-power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		};
+
+		button-usb1 {
+			label = "USB1 Button";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-usb2 {
+			label = "USB2 Button";
+			linux,code = <BTN_1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
+		pinctrl-names = "default";
+
+		led-0 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-8 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+		};
+
+		led-10 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-11 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&coherencyfab {
+	broken-idle;
+};
+
+&eth1 {
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-handle = <&ethphy0>;
+	phy-connection-type = "rgmii-id";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <100000>;
+	status = "okay";
+
+	hwmon@2a {
+		compatible = "nuvoton,nct7802";
+		reg = <0x2a>;
+	};
+
+	rtc@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0000000 0x200000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "certificate";
+				reg = <0x0200000 0x100000>;
+				read-only;
+			};
+
+			partition@300000 {
+				label = "preset_cfg";
+				reg = <0x0300000 0x100000>;
+				read-only;
+			};
+
+			partition@400000 {
+				label = "dev_params";
+				reg = <0x0400000 0x100000>;
+				read-only;
+			};
+			partition@500000 {
+				label = "active_bank";
+				reg = <0x0500000 0x0100000>;
+			};
+
+			partition@600000 {
+				label = "magic";
+				reg = <0x0600000 0x0100000>;
+				read-only;
+			};
+
+			partition@700000 {
+				label = "bank1";
+				reg = <0x0700000 0x2800000>;
+			};
+
+			partition@2f00000 {
+				label = "bank2";
+				reg = <0x2f00000 0x2800000>;
+			};
+
+			/* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+			partition@5a00000 {
+				label = "reserved";
+				reg = <0x5a00000 0x2000000>;
+			};
+
+			partition@7a00000 {
+				label = "rootfs";
+				reg = <0x7a00000 0x8600000>;
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 { /* Renesas uPD720202 USB 3.0 controller */
+		pinctrl-0 = <&pmx_pcie>;
+		pinctrl-names = "default";
+		status = "okay";
+		reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	pmx_poweroff: pmx-poweroff {
+		marvell,pins = "mpp7";
+		marvell,function = "gpo";
+	};
+
+	pmx_power_cpu: pmx-power-cpu {
+		marvell,pins = "mpp4";
+		marvell,function = "vdd";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds1: pmx-leds1 {
+		marvell,pins = "mpp47";
+		marvell,function = "gpo";
+	};
+
+	pmx_leds2: pmx-leds2 {
+		marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
+			       "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
+		marvell,function = "gpio";
+	};
+
+	pmx_pcie: pmx-pcie {
+		marvell,pins = "mpp59";
+		marvell,function = "gpio";
+	};
+
+	pmx_beeper: pmx-beeper {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+};
+
+&pmsu {
+	pinctrl-0 = <&pmx_power_cpu>;
+	pinctrl-names = "default";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	nr-ports = <2>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd0_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	hdd1_temp: sata-port@1 {
+		reg = <1>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 77261a2fb949..a7dc4c04d10b 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -203,7 +203,7 @@
 	pinctrl-names = "default";
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "mx25l25635e", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
index 2008c6eaaa52..561195b749eb 100644
--- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
+++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
@@ -86,19 +86,19 @@
 
 		pinctrl-names = "default";
 
-		sata-r-amber-pin {
+		led-sata-r-amber {
 			label = "dns327l:amber:sata-r";
 			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 
-		sata-l-amber-pin {
+		led-sata-l-amber {
 			label = "dns327l:amber:sata-l";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 
-		backup-led-pin {
+		led-backup {
 			label = "dns327l:white:usb";
 			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index b0b640b7de40..079b37cf148a 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -85,11 +85,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <8192>;
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 85e2e9e27a9f..d752ac1d7b58 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -94,11 +94,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <8192>;
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index c910d157a686..b459a670f615 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -20,6 +20,7 @@
 /dts-v1/;
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/gpio/gpio.h>
 #include "armada-370.dtsi"
 
@@ -61,8 +62,8 @@
 				status = "okay";
 				phy-mode = "rgmii-id";
 				fixed-link {
-					   speed = <1000>;
-					   full-duplex;
+					speed = <1000>;
+					full-duplex;
 				};
 			};
 
@@ -84,8 +85,6 @@
 
 			gpio-keys {
 				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
 				button {
 					label = "Software Button";
 					linux,code = <KEY_POWER>;
@@ -137,6 +136,17 @@
 	pinctrl-names = "default";
 	phy0: ethernet-phy@0 {
 		reg = <0>;
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_WHITE>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+		};
 	};
 
 	switch: switch@10 {
@@ -157,24 +167,24 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan1";
+				reg = <1>;
+				label = "lan1";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan2";
+				reg = <2>;
+				label = "lan2";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "lan3";
+				reg = <3>;
+				label = "lan3";
 			};
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&eth1>;
+				phy-mode = "rgmii-id";
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
index 3cf70c72c5ca..9cb69999b1db 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
@@ -72,11 +72,11 @@
 	};
 
 	gpio-leds {
-		red-sata2 {
+		led-red-sata2 {
 			label = "dart:red:sata2";
 			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
 		};
-		red-sata3 {
+		led-red-sata3 {
 			label = "dart:red:sata3";
 			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
index b52634ecf1d9..822f10734946 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -108,22 +108,20 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		backup {
+		button-backup {
 			label = "Backup button";
 			linux,code = <KEY_OPTION>;
 			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
@@ -134,21 +132,21 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		white-power {
+		led-white-power {
 			label = "dart:white:power";
 			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 
 		};
-		red-power {
+		led-red-power {
 			label = "dart:red:power";
 			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		};
-		red-sata0 {
+		led-red-sata0 {
 			label = "dart:red:sata0";
 			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
-		red-sata1 {
+		led-red-sata1 {
 			label = "dart:red:sata1";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 		};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index a624b2371fb6..124a8ba279e3 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -83,22 +83,20 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
 			debounce-interval = <100>;
 		};
-		reset {
+		button-reset {
 			label = "Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 			debounce-interval = <100>;
 		};
-		button {
+		button-usb {
 			label = "USB VBUS error";
 			linux,code = <KEY_UNKNOWN>;
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
@@ -109,7 +107,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		red-sata0 {
+		led-red-sata0 {
 			label = "cumulus:red:sata0";
 			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -159,7 +157,7 @@
 	pinctrl-0 = <&spi0_pins2>;
 	pinctrl-names = "default";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		/* MX25L8006E */
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index 64f2ce254fb6..f0893cc06607 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -91,9 +91,9 @@
 			};
 
 			ethernet@70000 {
-			       status = "okay";
-			       phy = <&phy1>;
-			       phy-mode = "sgmii";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
 			};
 
 			sata@a0000 {
@@ -258,7 +258,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q064", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 46e6d3ed8f35..2013a5ccecd3 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -60,34 +60,54 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
 				#interrupt-cells = <1>;
                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 9>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index 0e679465cbb5..4c4092790a20 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -64,7 +64,7 @@
 
 	status = "disabled";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 7f2f24a29e6c..ddc49547d786 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -178,6 +178,8 @@
 
 			/* Network controller */
 			ethernet: ethernet@f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				compatible = "marvell,armada-375-pp2";
 				reg = <0xf0000 0xa000>, /* Packet Processor regs */
 				      <0xc0000 0x3060>, /* LMS regs */
@@ -187,15 +189,17 @@
 				clock-names = "pp_clk", "gop_clk";
 				status = "disabled";
 
-				eth0: eth0 {
+				eth0: ethernet-port@0 {
 					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <0>;
+					reg = <0>;
+					port-id = <0>; /* For backward compatibility. */
 					status = "disabled";
 				};
 
-				eth1: eth1 {
+				eth1: ethernet-port@1 {
 					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <1>;
+					reg = <1>;
+					port-id = <1>; /* For backward compatibility. */
 					status = "disabled";
 				};
 			};
@@ -568,34 +572,54 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie1: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 		};
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
index cff1269f3fbf..e94f22b0e9b5 100644
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -64,54 +64,84 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
new file mode 100644
index 000000000000..f4c4b213ef4e
--- /dev/null
+++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2021, Marcel Ziswiler <marcel@ziswiler.com> */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Netgear GS110EMX";
+	compatible = "netgear,gs110emx", "marvell,armada380";
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&front_button_pins>;
+		pinctrl-names = "default";
+
+		key-factory-default {
+			label = "Factory Default";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>; /* 128 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			rtc@a3800 {
+				/*
+				 * If the rtc doesn't work, run "date reset"
+				 * twice in u-boot.
+				 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	fixed-link {
+		full-duplex;
+		pause;
+		speed = <1000>;
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6190";
+		#address-cells = <1>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&switch_interrupt_pins>;
+		pinctrl-names = "default";
+		#size-cells = <0>;
+		reg = <0>;
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1: switch0phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy2: switch0phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: switch0phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: switch0phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy5: switch0phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy6: switch0phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy7: switch0phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy8: switch0phy8@8 {
+				reg = <0x8>;
+			};
+		};
+
+		mdio-external {
+			compatible = "marvell,mv88e6xxx-mdio-external";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy1: ethernet-phy@b {
+				reg = <0xb>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+
+			phy2: ethernet-phy@c {
+				reg = <0xc>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				ethernet = <&eth0>;
+				phy-mode = "rgmii";
+				reg = <0>;
+
+				fixed-link {
+					full-duplex;
+					pause;
+					speed = <1000>;
+				};
+			};
+
+			port@1 {
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+				reg = <1>;
+			};
+
+			port@2 {
+				label = "lan2";
+				phy-handle = <&switch0phy2>;
+				reg = <2>;
+			};
+
+			port@3 {
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+				reg = <3>;
+			};
+
+			port@4 {
+				label = "lan4";
+				phy-handle = <&switch0phy4>;
+				reg = <4>;
+			};
+
+			port@5 {
+				label = "lan5";
+				phy-handle = <&switch0phy5>;
+				reg = <5>;
+			};
+
+			port@6 {
+				label = "lan6";
+				phy-handle = <&switch0phy6>;
+				reg = <6>;
+			};
+
+			port@7 {
+				label = "lan7";
+				phy-handle = <&switch0phy7>;
+				reg = <7>;
+			};
+
+			port@8 {
+				label = "lan8";
+				phy-handle = <&switch0phy8>;
+				reg = <8>;
+			};
+
+			port@9 {
+				/* 88X3310P external phy */
+				label = "lan9";
+				phy-handle = <&phy1>;
+				phy-mode = "xaui";
+				reg = <9>;
+			};
+
+			port@a {
+				/* 88X3310P external phy */
+				label = "lan10";
+				phy-handle = <&phy2>;
+				phy-mode = "xaui";
+				reg = <0xa>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	front_button_pins: front-button-pins {
+		marvell,pins = "mpp38";
+		marvell,function = "gpio";
+	};
+
+	switch_interrupt_pins: switch-interrupt-pins {
+		marvell,pins = "mpp39";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "boot";
+				read-only;
+				reg = <0x00000000 0x00100000>;
+			};
+
+			partition@100000 {
+				label = "env";
+				reg = <0x00100000 0x00010000>;
+			};
+
+			partition@200000 {
+				label = "rsv";
+				reg = <0x00110000 0x00010000>;
+			};
+
+			partition@300000 {
+				label = "image0";
+				reg = <0x00120000 0x00900000>;
+			};
+
+			partition@400000 {
+				label = "config";
+				reg = <0x00a20000 0x00300000>;
+			};
+
+			partition@480000 {
+				label = "debug";
+				reg = <0x00d20000 0x002e0000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-385-atl-x530.dts b/arch/arm/boot/dts/armada-385-atl-x530.dts
new file mode 100644
index 000000000000..241f5d7c80e9
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-atl-x530.dts
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Armada 385 Allied Telesis x530/GS980MX Board.
+ (x530/AT-GS980MX)
+ *
+ Copyright (C) 2020 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "x530/AT-GS980MX";
+	compatible = "alliedtelesis,gs980mx", "alliedtelesis,x530", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x3d) 0 0xf4800000 0x80000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c0: i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+			};
+
+			uart0: serial@12000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+	reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <400000>;
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&devbus_cs1 {
+	compatible = "marvell,mvebu-devbus";
+	status = "okay";
+
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+
+	nvs@0 {
+		status = "okay";
+
+		compatible = "mtd-ram";
+		reg = <0 0x00080000>;
+		bank-width = <1>;
+		label = "nvs";
+	};
+};
+
+&pinctrl {
+	i2c0_gpio_pins: i2c-gpio-pins-0 {
+		marvell,pins = "mpp2", "mpp3";
+		marvell,function = "gpio";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-1 = <&i2c0_gpio_pins>;
+	scl-gpio = <&gpio0 2 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+	sda-gpio = <&gpio0 3 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+	i2c0mux: mux@71 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,pca9544";
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 { /* POE devices MUX */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adt7476_2e: hwmon@2e {
+				compatible = "adi,adt7476";
+				reg = <0x2e>;
+			};
+
+			adt7476_2d: hwmon@2d {
+				compatible = "adi,adt7476";
+				reg = <0x2d>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			rtc@68 {
+				compatible = "dallas,ds1340";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			gpio@20 {
+				compatible = "nxp,pca9554";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x20>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <1>; /* Chip select 1 */
+		spi-max-frequency = <54000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@u-boot {
+				reg = <0x00000000 0x00100000>;
+				label = "u-boot";
+			};
+			partition@u-boot-env {
+				reg = <0x00100000 0x00040000>;
+				label = "u-boot-env";
+			};
+			partition@unused {
+				reg = <0x00140000 0x00e80000>;
+				label = "unused";
+			};
+			partition@idprom {
+				reg = <0x00fc0000 0x00040000>;
+				label = "idprom";
+			};
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		marvell,nand-enable-arbiter;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@user {
+				reg = <0x00000000 0x0f000000>;
+				label = "user";
+			};
+			partition@errlog {
+				/* Maximum mtdoops size is 8MB, so set to that. */
+				reg = <0x0f000000 0x00800000>;
+				label = "errlog";
+			};
+			partition@nand-bbt {
+				reg = <0x0f800000 0x00800000>;
+				label = "nand-bbt";
+			};
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
index c9ac630e5874..1990f7d0cc79 100644
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
@@ -68,8 +68,13 @@
 
 			port@10 {
 				reg = <10>;
-				label = "cpu";
+				phy-mode = "2500base-x";
+
 				ethernet = <&eth1>;
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
 			};
 
 		};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
index fa653b379490..b795ad573891 100644
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
@@ -48,8 +48,13 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "2500base-x";
 				ethernet = <&eth1>;
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
 			};
 
 		};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
index 624bbcae68c0..d1452a04e904 100644
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
@@ -256,14 +256,14 @@
 		pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>;
 		pinctrl-names = "default";
 
-		button_0 {
+		button-0 {
 			label = "Rear Button";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 			linux,can-disable;
 			linux,code = <BTN_0>;
 		};
 
-		button_1 {
+		button-1 {
 			label = "Front Button";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			linux,can-disable;
@@ -365,7 +365,7 @@
 	pinctrl-names = "default";
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "w25q32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
index 7881df3b28a0..389d9c75d546 100644
--- a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
+++ b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
@@ -126,7 +126,7 @@
 	pinctrl-0 = <&spi1_pins>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index 0e4613bb56ee..332f8fce77dc 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -192,7 +192,7 @@
 	pinctrl-0 = <&spi1_pins>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p128", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
index a03050c97084..88b2921fed55 100644
--- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
@@ -62,11 +62,11 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		label = "caiman:white:power";
 	};
 
-	sata {
+	led-sata {
 		label = "caiman:white:sata";
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
index e3e4877a6f49..88200f930d0d 100644
--- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
@@ -62,11 +62,11 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		label = "cobra:white:power";
 	};
 
-	sata {
+	led-sata {
 		label = "cobra:white:sata";
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts
index 3c4af57ec2b9..4ab45f294de2 100644
--- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
@@ -54,22 +54,22 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 		label = "rango:white:power";
 	};
 
-	sata {
+	led-sata {
 		gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
 		label = "rango:white:sata";
 	};
 
-	wlan_2g {
+	led-wlan_2g {
 		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 		label = "rango:white:wlan_2g";
 	};
 
-	wlan_5g {
+	led-wlan_5g {
 		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		label = "rango:white:wlan_5g";
 	};
diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
index 3451cd3e5dff..f1b1f22413f1 100644
--- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
@@ -62,11 +62,11 @@
 };
 
 &gpio_leds {
-	power {
+	led-power {
 		label = "shelby:white:power";
 	};
 
-	sata {
+	led-sata {
 		label = "shelby:white:sata";
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index fb9c8a0b241c..fc8216fd9f60 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -53,13 +53,13 @@
 		pinctrl-0 = <&gpio_keys_pins>;
 		pinctrl-names = "default";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
@@ -71,12 +71,12 @@
 		pinctrl-0 = <&gpio_leds_pins>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		sata {
+		led-sata {
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "disk-activity";
@@ -195,7 +195,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "sgmii";
 				ethernet = <&eth2>;
 
 				fixed-link {
diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
index d8769956cbfc..ea91ff964d94 100644
--- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
+++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
@@ -149,7 +149,7 @@
 			 * sata0, and accesses to SATA disk 0 make it blink so it
 			 * doesn't need to be declared here.
 			 */
-			orange {
+			led-orange {
 				gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 				label = "ds116:orange:disk";
 				default-state = "off";
@@ -223,7 +223,7 @@
 	pinctrl-0 = <&spi0_pins>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "macronix,mx25l6405d", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 646a06420c77..2d8d319bec83 100644
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -23,6 +23,12 @@
 		stdout-path = &uart0;
 	};
 
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1024 MB */
@@ -32,7 +38,8 @@
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
 
@@ -70,16 +77,19 @@
 			pcie@1,0 {
 				/* Port 0, Lane 0 */
 				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
 			};
 
 			pcie@2,0 {
 				/* Port 1, Lane 0 */
 				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
 			};
 
 			pcie@3,0 {
 				/* Port 2, Lane 0 */
 				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
 			};
 		};
 	};
@@ -101,6 +111,33 @@
 		 */
 		status = "disabled";
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio_controller 1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&audio_controller {
+	/* Pin header U16, GPIO51 in SPDIFO mode */
+	pinctrl-0 = <&spdif_pins>;
+	pinctrl-names = "default";
+	spdif-mode;
+	status = "okay";
 };
 
 &bm {
@@ -162,6 +199,7 @@
 	buffer-manager = <&bm>;
 	bm,pool-long = <2>;
 	bm,pool-short = <3>;
+	label = "wan";
 };
 
 &i2c0 {
@@ -187,15 +225,13 @@
 				reg = <0x2b>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				status = "okay";
 
 				/*
 				 * LEDs are controlled by MCU (STM32F0) at
 				 * address 0x2b.
 				 *
-				 * The driver does not support HW control mode
-				 * for the LEDs yet. Disable the LEDs for now.
-				 *
-				 * Also LED functions are not stable yet:
+				 * LED functions are not stable yet:
 				 * - there are 3 LEDs connected via MCU to PCIe
 				 *   ports. One of these ports supports mSATA.
 				 *   There is no mSATA nor PCIe function.
@@ -206,7 +242,6 @@
 				 *   B. Again there is no such function defined.
 				 *   For now we use LED_FUNCTION_INDICATOR
 				 */
-				status = "disabled";
 
 				multi-led@0 {
 					reg = <0x0>;
@@ -344,7 +379,11 @@
 			#size-cells = <0>;
 			reg = <5>;
 
-			/* ATSHA204A at address 0x64 */
+			/* ATSHA204A-MAHDA-T crypto module */
+			crypto@64 {
+				compatible = "atmel,atsha204a";
+				reg = <0x64>;
+			};
 		};
 
 		i2c@6 {
@@ -389,6 +428,8 @@
 	phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		marvell,reg-init = <3 18 0 0x4985>,
+				   <3 16 0xfff0 0x0001>;
 
 		/* irq is connected to &pcawan pin 7 */
 	};
@@ -438,7 +479,6 @@
 
 			ports@5 {
 				reg = <5>;
-				label = "cpu";
 				ethernet = <&eth1>;
 				phy-mode = "rgmii-id";
 
@@ -448,7 +488,16 @@
 				};
 			};
 
-			/* port 6 is connected to eth0 */
+			ports@6 {
+				reg = <6>;
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
 		};
 	};
 };
@@ -469,7 +518,7 @@
 		marvell,function = "spi0";
 	};
 
-	spi0cs1_pins: spi0cs1-pins {
+	spi0cs2_pins: spi0cs2-pins {
 		marvell,pins = "mpp26";
 		marvell,function = "spi0";
 	};
@@ -480,7 +529,7 @@
 	pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
 	status = "okay";
 
-	spi-nor@0 {
+	flash@0 {
 		compatible = "spansion,s25fl164k", "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -504,7 +553,7 @@
 		};
 	};
 
-	/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
+	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
 };
 
 &uart0 {
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index f0022d10c715..be8d607c59b2 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -69,54 +69,81 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/*
@@ -125,20 +152,29 @@
 			 */
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <3>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts
index 53b4bd35522a..f7daa3bc707e 100644
--- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
@@ -19,7 +19,7 @@
 		pinctrl-0 = <&rear_button_pins>;
 		pinctrl-names = "default";
 
-		button_0 {
+		button-0 {
 			/* The rear SW3 button */
 			label = "Rear Button";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index 4140a5303b48..95299167dcf5 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -35,7 +35,7 @@
 		pinctrl-0 = <&rear_button_pins>;
 		pinctrl-names = "default";
 
-		button_0 {
+		button-0 {
 			/* The rear SW3 button */
 			label = "Rear Button";
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index a2bec07bf4c5..45cc784659fd 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -36,6 +36,11 @@
 			i2c@11000 {
 				status = "okay";
 				clock-frequency = <100000>;
+				audio_codec: audio-codec@4a {
+					#sound-dai-cells = <0>;
+					compatible = "cirrus,cs42l51";
+					reg = <0x4a>;
+				};
 			};
 
 			i2c@11100 {
@@ -57,7 +62,7 @@
 			};
 
 			usb@58000 {
-				status = "ok";
+				status = "okay";
 			};
 
 			ethernet@70000 {
@@ -99,6 +104,12 @@
 				no-1-8-v;
 			};
 
+			audio-controller@e8000 {
+				pinctrl-0 = <&i2s_pins>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
 			usb3@f0000 {
 				status = "okay";
 			};
@@ -128,12 +139,70 @@
 			};
 		};
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Armada 385 DB Audio";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Out Jack",
+			"Line", "In Jack";
+		simple-audio-card,routing =
+			"Out Jack", "HPL",
+			"Out Jack", "HPR",
+			"AIN1L", "In Jack",
+			"AIN1R", "In Jack";
+		status = "disabled";
+
+		simple-audio-card,dai-link@0 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 0>;
+			};
+
+			codec {
+				sound-dai = <&audio_codec>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+
+		simple-audio-card,dai-link@2 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
 };
 
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "w25q32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index 9d873257ac45..e2ba50520b6b 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -395,7 +395,7 @@
 	pinctrl-0 = <&spi0_pins>;
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p128", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts
index 328a4d6afd2c..c0efafd45b33 100644
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ b/arch/arm/boot/dts/armada-388-rd.dts
@@ -97,7 +97,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p128", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
index 363ac4238859..2c64bc6e5a17 100644
--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -101,7 +101,7 @@
 	/* The microsom has an optional W25Q32 on board, connected to CS0 */
 	pinctrl-0 = <&spi1_pins>;
 
-	w25q32: spi-flash@0 {
+	w25q32: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "w25q32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 9b1a24cc5e91..446861b6b17b 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -168,7 +168,7 @@
 			};
 
 			uart0: serial@12000 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -178,7 +178,7 @@
 			};
 
 			uart1: serial@12100 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
@@ -289,6 +289,18 @@
 					marvell,pins = "mpp44";
 					marvell,function = "sata3";
 				};
+
+				i2s_pins: i2s-pins {
+					marvell,pins = "mpp48", "mpp49",
+						       "mpp50", "mpp51",
+						       "mpp52", "mpp53";
+					marvell,function = "audio";
+				};
+
+				spdif_pins: spdif-pins {
+					marvell,pins = "mpp51";
+					marvell,function = "audio";
+				};
 			};
 
 			gpio0: gpio@18100 {
@@ -298,6 +310,7 @@
 				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
+				gpio-ranges = <&pinctrl 0 0 32>;
 				#gpio-cells = <2>;
 				#pwm-cells = <2>;
 				interrupt-controller;
@@ -316,6 +329,7 @@
 				reg-names = "gpio", "pwm";
 				ngpios = <28>;
 				gpio-controller;
+				gpio-ranges = <&pinctrl 0 32 28>;
 				#gpio-cells = <2>;
 				#pwm-cells = <2>;
 				interrupt-controller;
@@ -618,6 +632,18 @@
 				status = "disabled";
 			};
 
+			audio_controller: audio-controller@e8000 {
+				#sound-dai-cells = <1>;
+				compatible = "marvell,armada-380-audio";
+				reg = <0xe8000 0x4000>, <0x18410 0xc>,
+				      <0x18204 0x4>;
+				reg-names = "i2s_regs", "pll_regs", "soc_ctrl";
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 0>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
 			usb3_0: usb3@f0000 {
 				compatible = "marvell,armada-380-xhci";
 				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts
index 0e29474ae9a2..792d0a0184e8 100644
--- a/arch/arm/boot/dts/armada-390-db.dts
+++ b/arch/arm/boot/dts/armada-390-db.dts
@@ -81,7 +81,7 @@
 	pinctrl-0 = <&spi1_pins>;
 	pinctrl-names = "default";
 
-	spi-flash@1 {
+	flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "n25q128a13",
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
index fc28308e5bc5..ec6cdbeedde7 100644
--- a/arch/arm/boot/dts/armada-398-db.dts
+++ b/arch/arm/boot/dts/armada-398-db.dts
@@ -79,7 +79,7 @@
 	pinctrl-0 = <&spi1_pins>;
 	pinctrl-names = "default";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index e0b7c2099831..9d1cac49c022 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -438,54 +438,84 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/*
@@ -494,20 +524,30 @@
 			 */
 			pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <3>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index 38a052a0312d..7a7e2066c498 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -76,16 +76,26 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
@@ -286,6 +296,7 @@
 	compatible = "marvell,armada-xp-wdt";
 	clocks = <&coreclk 2>, <&refclk>;
 	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
 };
 
 &cpurst {
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 606fd3476a59..5a74197be0ad 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -69,14 +69,12 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&keys_pin>;
 		pinctrl-names = "default";
 
-		reset {
+		button-reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_SETUP>;
 			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -134,7 +132,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
index a022c68dc943..c28e140b4afc 100644
--- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
+++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
@@ -15,7 +15,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi
index 32fb21b2bf6a..47b003a81bd4 100644
--- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi
+++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi
@@ -80,7 +80,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
index 21f442afab1f..20ba5c823bb2 100644
--- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
+++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
@@ -15,7 +15,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi
index f3e1a25ca5f2..cab99d8e2911 100644
--- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi
+++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi
@@ -80,7 +80,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
index e05aee6cdc04..2caa3980fdf6 100644
--- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
+++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
@@ -15,7 +15,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi
index c8b1355ce15e..7028482ce4b2 100644
--- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi
+++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi
@@ -80,7 +80,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
index 8a3aa616bbd0..02bef8dc4270 100644
--- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
+++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
@@ -93,7 +93,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p64";
diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
index 4ec0ae01b61d..d1b61dad0c46 100644
--- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
+++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
@@ -89,7 +89,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p64";
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 5d04dc68cf57..75318fd0fc11 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -235,7 +235,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p64", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index b4cca507cf13..d1d348b91c0a 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -220,7 +220,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index 87dcb502f72d..0dad95ea26c2 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -164,7 +164,7 @@
 		};
 	};
 
-	spi3 {
+	spi-3 {
 		compatible = "spi-gpio";
 		status = "okay";
 		gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 8480a16919a0..7a0614fd0c93 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -172,20 +172,18 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&keys_pin>;
 		pinctrl-names = "default";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -197,7 +195,7 @@
 		pinctrl-0 = <&power_led_pin>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			label = "mamba:white:power";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -255,7 +253,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "everspin,mr25h256";
@@ -304,7 +302,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0>;
 				fixed-link {
 					speed = <1000>;
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 8558bf6bb54c..5ea9d509cd30 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -83,88 +83,138 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <2>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <3>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 9>;
 				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 2d85fe8ac327..6c6fbb9faf5a 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -98,160 +98,250 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <2>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <3>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 9>;
 				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie6: pcie@6,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 63>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
 					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie6_intc 0>,
+						<0 0 0 2 &pcie6_intc 1>,
+						<0 0 0 3 &pcie6_intc 2>,
+						<0 0 0 4 &pcie6_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 10>;
 				status = "disabled";
+
+				pcie6_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie7: pcie@7,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 64>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
 					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie7_intc 0>,
+						<0 0 0 2 &pcie7_intc 1>,
+						<0 0 0 3 &pcie7_intc 2>,
+						<0 0 0 4 &pcie7_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <2>;
 				clocks = <&gateclk 11>;
 				status = "disabled";
+
+				pcie7_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie8: pcie@8,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 65>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
 					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie8_intc 0>,
+						<0 0 0 2 &pcie8_intc 1>,
+						<0 0 0 3 &pcie8_intc 2>,
+						<0 0 0 4 &pcie8_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <3>;
 				clocks = <&gateclk 12>;
 				status = "disabled";
+
+				pcie8_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie9: pcie@9,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 99>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
 					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie9_intc 0>,
+						<0 0 0 2 &pcie9_intc 1>,
+						<0 0 0 3 &pcie9_intc 2>,
+						<0 0 0 4 &pcie9_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 26>;
 				status = "disabled";
+
+				pcie9_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 230a3fd36b30..16185edf9aa5 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -119,16 +119,26 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie2: pcie@2,0 {
@@ -137,16 +147,26 @@
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie3: pcie@3,0 {
@@ -155,16 +175,26 @@
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <2>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie4: pcie@4,0 {
@@ -173,16 +203,26 @@
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <3>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie5: pcie@5,0 {
@@ -191,16 +231,26 @@
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 9>;
 				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie6: pcie@6,0 {
@@ -209,16 +259,26 @@
 				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 63>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
 					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie6_intc 0>,
+						<0 0 0 2 &pcie6_intc 1>,
+						<0 0 0 3 &pcie6_intc 2>,
+						<0 0 0 4 &pcie6_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 10>;
 				status = "disabled";
+
+				pcie6_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie7: pcie@7,0 {
@@ -227,16 +287,26 @@
 				reg = <0x3800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 64>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
 					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie7_intc 0>,
+						<0 0 0 2 &pcie7_intc 1>,
+						<0 0 0 3 &pcie7_intc 2>,
+						<0 0 0 4 &pcie7_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <2>;
 				clocks = <&gateclk 11>;
 				status = "disabled";
+
+				pcie7_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie8: pcie@8,0 {
@@ -245,16 +315,26 @@
 				reg = <0x4000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 65>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
 					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie8_intc 0>,
+						<0 0 0 2 &pcie8_intc 1>,
+						<0 0 0 3 &pcie8_intc 2>,
+						<0 0 0 4 &pcie8_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <3>;
 				clocks = <&gateclk 12>;
 				status = "disabled";
+
+				pcie8_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie9: pcie@9,0 {
@@ -263,16 +343,26 @@
 				reg = <0x4800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 99>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
 					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie9_intc 0>,
+						<0 0 0 2 &pcie9_intc 1>,
+						<0 0 0 3 &pcie9_intc 2>,
+						<0 0 0 4 &pcie9_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 26>;
 				status = "disabled";
+
+				pcie9_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie10: pcie@a,0 {
@@ -281,16 +371,26 @@
 				reg = <0x5000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 103>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
 					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 103>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie10_intc 0>,
+						<0 0 0 2 &pcie10_intc 1>,
+						<0 0 0 3 &pcie10_intc 2>,
+						<0 0 0 4 &pcie10_intc 3>;
 				marvell,pcie-port = <3>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 27>;
 				status = "disabled";
+
+				pcie10_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 8ea73587db81..31933f81144e 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -121,11 +121,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 
 	gpio-leds {
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 0efcc166dabf..1ecf72a61bca 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -97,12 +97,10 @@
 				};
 			};
 
-			gpio_keys {
+			gpio-keys {
 				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				init {
+				button-init {
 					label = "Init Button";
 					linux,code = <KEY_POWER>;
 					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index 809e821d7399..5551bac1962c 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -274,7 +274,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q064", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 6c19984d668e..4297482da62f 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -260,6 +260,7 @@
 	compatible = "marvell,armada-xp-wdt";
 	clocks = <&coreclk 2>, <&refclk>;
 	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
 };
 
 &cpurst {
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts
index d20d95359b28..042a9cc920c6 100644
--- a/arch/arm/boot/dts/artpec6-devboard.dts
+++ b/arch/arm/boot/dts/artpec6-devboard.dts
@@ -1,10 +1,5 @@
-/*
- * Axis ARTPEC-6 development board.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Axis ARTPEC-6 development board.
 
 /dts-v1/;
 #include "artpec6.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 8bec21ed0de5..a497dd135491 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -5,7 +5,7 @@
 
 / {
 	model = "AST2500 EVB";
-	compatible = "aspeed,ast2500";
+	compatible = "aspeed,ast2500-evb", "aspeed,ast2500";
 
 	aliases {
 		serial4 = &uart5;
@@ -13,7 +13,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -129,3 +129,7 @@
      status = "okay";
      memory-region = <&gfx_memory>;
 };
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
new file mode 100644
index 000000000000..f34a2b1ec2f0
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 IBM Corp.
+
+#include "aspeed-ast2600-evb.dts"
+
+/ {
+	model = "AST2600 A1 EVB";
+	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600-evb", "aspeed,ast2600";
+
+	/delete-node/regulator-vcc-sdhci0;
+	/delete-node/regulator-vcc-sdhci1;
+	/delete-node/regulator-vccq-sdhci0;
+	/delete-node/regulator-vccq-sdhci1;
+};
+
+/delete-node/ &sdc;
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index 2772796e215e..de83c0eb1d6e 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -4,10 +4,11 @@
 /dts-v1/;
 
 #include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
 
 / {
 	model = "AST2600 EVB";
-	compatible = "aspeed,ast2600";
+	compatible = "aspeed,ast2600-evb", "aspeed,ast2600";
 
 	aliases {
 		serial4 = &uart5;
@@ -21,6 +22,66 @@
 		device_type = "memory";
 		reg = <0x80000000 0x80000000>;
 	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	vcc_sdhci0: regulator-vcc-sdhci0 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHCI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhci0: regulator-vccq-sdhci0 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHCI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>,
+			 <1800000 0>;
+	};
+
+	vcc_sdhci1: regulator-vcc-sdhci1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHCI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhci1: regulator-vccq-sdhci1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHCI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>,
+			 <1800000 0>;
+	};
 };
 
 &mdio0 {
@@ -62,7 +123,7 @@
 &mac0 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy0>;
 
 	pinctrl-names = "default";
@@ -73,7 +134,7 @@
 &mac1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy1>;
 
 	pinctrl-names = "default";
@@ -107,7 +168,8 @@
 &emmc {
 	non-removable;
 	bus-width = <4>;
-	max-frequency = <52000000>;
+	max-frequency = <100000000>;
+	clk-phase-mmc-hs200 = <9>, <225>;
 };
 
 &rtc {
@@ -120,38 +182,9 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
+		spi-rx-bus-width = <4>;
 		spi-max-frequency = <50000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			u-boot@0 {
-				reg = <0x0 0xe0000>; // 896KB
-				label = "u-boot";
-			};
-
-			u-boot-env@e0000 {
-				reg = <0xe0000 0x20000>; // 128KB
-				label = "u-boot-env";
-			};
-
-			kernel@100000 {
-				reg = <0x100000 0x900000>; // 9MB
-				label = "kernel";
-			};
-
-			rofs@a00000 {
-				reg = <0xa00000 0x2000000>; // 32MB
-				label = "rofs";
-			};
-
-			rwfs@6000000 {
-				reg = <0x2a00000 0x1600000>; // 22MB
-				label = "rwfs";
-			};
-		};
+#include "openbmc-flash-layout-64.dtsi"
 	};
 };
 
@@ -164,6 +197,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "pnor";
+		spi-rx-bus-width = <4>;
 		spi-max-frequency = <100000000>;
 	};
 };
@@ -175,11 +209,6 @@
 
 &i2c0 {
 	status = "okay";
-
-	temp@2e {
-		compatible = "adi,adt7490";
-		reg = <0x2e>;
-	};
 };
 
 &i2c1 {
@@ -208,10 +237,26 @@
 
 &i2c7 {
 	status = "okay";
+
+	temp@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
 };
 
 &i2c8 {
 	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
 };
 
 &i2c9 {
@@ -245,3 +290,61 @@
 &uhci {
 	status = "okay";
 };
+
+&sdc {
+	status = "okay";
+};
+
+/*
+ * The signal voltage of sdhci0 and sdhci1 on AST2600-A2 EVB is able to be
+ * toggled by GPIO pins.
+ * In the reference design, GPIOV0 of AST2600-A2 EVB is connected to the
+ * power load switch that provides 3.3v to sdhci0 vdd, GPIOV1 is connected to
+ * a 1.8v and a 3.3v power load switch that provides signal voltage to
+ * sdhci0 bus.
+ * If GPIOV0 is active high, sdhci0 is enabled, otherwise, sdhci0 is disabled.
+ * If GPIOV1 is active high, 3.3v power load switch is enabled, sdhci0 signal
+ * voltage is 3.3v, otherwise, 1.8v power load switch will be enabled,
+ * sdhci0 signal voltage becomes 1.8v.
+ * AST2600-A2 EVB also supports toggling signal voltage for sdhci1.
+ * The design is the same as sdhci0, it uses GPIOV2 as power-gpio and GPIOV3
+ * as power-switch-gpio.
+ */
+&sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	sdhci-drive-type = /bits/ 8 <3>;
+	sdhci-caps-mask = <0x7 0x0>;
+	sdhci,wp-inverted;
+	vmmc-supply = <&vcc_sdhci0>;
+	vqmmc-supply = <&vccq_sdhci0>;
+	clk-phase-sd-hs = <7>, <200>;
+};
+
+&sdhci1 {
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	sdhci-drive-type = /bits/ 8 <3>;
+	sdhci-caps-mask = <0x7 0x0>;
+	sdhci,wp-inverted;
+	vmmc-supply = <&vcc_sdhci1>;
+	vqmmc-supply = <&vccq_sdhci1>;
+	clk-phase-sd-hs = <7>, <200>;
+};
+
+&vhub {
+	status = "okay";
+	pinctrl-names = "default";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts b/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts
new file mode 100644
index 000000000000..64bb9bf92de2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "AMD DaytonaX BMC";
+	compatible = "amd,daytonax-bmc", "aspeed,ast2500";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-fault {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		led-identify {
+			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>,
+			<&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&uart1 {
+	//Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		&pinctrl_rxd1_default
+		&pinctrl_nrts1_default
+		&pinctrl_ndtr1_default
+		&pinctrl_ndsr1_default
+		&pinctrl_ncts1_default
+		&pinctrl_ndcd1_default
+		&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	//BMC Console
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"","","led-fault","led-identify","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"id-button","","","","","","","",
+	/*D0-D7*/	"","","ASSERT_BMC_READY","","","","","",
+	/*E0-E7*/	"reset-button","reset-control","power-button","power-control","",
+			"power-good","power-ok","",
+	/*F0-F7*/	"","","","","","","BATTERY_DETECT","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"FM_BMC_READ_SPD_TEMP","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm1_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default
+		&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@14 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@15 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
index ac2d04cfaf2f..6bded774c457 100644
--- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
@@ -5,6 +5,7 @@
 
 #include "aspeed-g5.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "AMD EthanolX BMC";
@@ -34,7 +35,7 @@
 	};
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 	leds {
 		compatible = "gpio-leds";
@@ -58,10 +59,22 @@
 	flash@0 {
 		status = "okay";
 		m25p,fast-read;
+		label = "bmc";
 		#include "openbmc-flash-layout.dtsi"
 	};
 };
 
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
 
 &mac0 {
 	status = "okay";
@@ -78,7 +91,9 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default>;
+		     &pinctrl_rxd1_default
+		     &pinctrl_nrts1_default
+		     &pinctrl_ncts1_default>;
 };
 
 &uart5 {
@@ -151,6 +166,36 @@
 	status = "okay";
 };
 
+//FPGA
+&i2c2 {
+	status = "okay";
+};
+
+//24LC128 EEPROM
+&i2c3 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+//P0 Power regulators
+&i2c4 {
+	status = "okay";
+};
+
+//P1 Power regulators
+&i2c5 {
+	status = "okay";
+};
+
+//P0/P1 Thermal diode
+&i2c6 {
+	status = "okay";
+};
+
 // Thermal Sensors
 &i2c7 {
 	status = "okay";
@@ -196,6 +241,11 @@
 	};
 };
 
+//BMC I2C
+&i2c8 {
+	status = "okay";
+};
+
 &kcs1 {
 	status = "okay";
 	aspeed,lpc-io-reg = <0x60>;
@@ -226,6 +276,12 @@
 	status = "okay";
 };
 
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &pwm_tacho {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index 8f5ec22e51c2..0a51d2e32fab 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -7,9 +7,53 @@
 	model = "Ampere Mt. Jade BMC";
 	compatible = "ampere,mtjade-bmc", "aspeed,ast2500";
 
+	aliases {
+		/*
+		 *  i2c bus 50-57 assigned to NVMe slot 0-7
+		 */
+		i2c50 = &nvmeslot_0;
+		i2c51 = &nvmeslot_1;
+		i2c52 = &nvmeslot_2;
+		i2c53 = &nvmeslot_3;
+		i2c54 = &nvmeslot_4;
+		i2c55 = &nvmeslot_5;
+		i2c56 = &nvmeslot_6;
+		i2c57 = &nvmeslot_7;
+
+		/*
+		 *  i2c bus 60-67 assigned to NVMe slot 8-15
+		 */
+		i2c60 = &nvmeslot_8;
+		i2c61 = &nvmeslot_9;
+		i2c62 = &nvmeslot_10;
+		i2c63 = &nvmeslot_11;
+		i2c64 = &nvmeslot_12;
+		i2c65 = &nvmeslot_13;
+		i2c66 = &nvmeslot_14;
+		i2c67 = &nvmeslot_15;
+
+		/*
+		 *  i2c bus 70-77 assigned to NVMe slot 16-23
+		 */
+		i2c70 = &nvmeslot_16;
+		i2c71 = &nvmeslot_17;
+		i2c72 = &nvmeslot_18;
+		i2c73 = &nvmeslot_19;
+		i2c74 = &nvmeslot_20;
+		i2c75 = &nvmeslot_21;
+		i2c76 = &nvmeslot_22;
+		i2c77 = &nvmeslot_23;
+
+		/*
+		 *  i2c bus 80-81 assigned to NVMe M2 slot 0-1
+		 */
+		i2c80 = &nvme_m2_0;
+		i2c81 = &nvme_m2_1;
+	};
+
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -53,65 +97,6 @@
 		};
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		shutdown_ack {
-			label = "SHUTDOWN_ACK";
-			gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(G, 2)>;
-		};
-
-		reboot_ack {
-			label = "REBOOT_ACK";
-			gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 3)>;
-		};
-
-		S0_overtemp {
-			label = "S0_OVERTEMP";
-			gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(G, 3)>;
-		};
-
-		S0_hightemp {
-			label = "S0_HIGHTEMP";
-			gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 0)>;
-		};
-
-		S0_cpu_fault {
-			label = "S0_CPU_FAULT";
-			gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
-			linux,code = <ASPEED_GPIO(J, 1)>;
-		};
-
-		S1_overtemp {
-			label = "S1_OVERTEMP";
-			gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 6)>;
-		};
-
-		S1_hightemp {
-			label = "S1_HIGHTEMP";
-			gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(AB, 0)>;
-		};
-
-		S1_cpu_fault {
-			label = "S1_CPU_FAULT";
-			gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
-			linux,code = <ASPEED_GPIO(Z, 1)>;
-		};
-
-		id_button {
-			label = "ID_BUTTON";
-			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Q, 5)>;
-		};
-
-	};
-
 	gpioA0mux: mux-controller {
 		compatible = "gpio-mux";
 		#mux-control-cells = <0>;
@@ -259,17 +244,8 @@
 			<&adc10mux 0>, <&adc10mux 1>,
 			<&adc11mux 0>, <&adc11mux 1>,
 			<&adc12mux 0>, <&adc12mux 1>,
-			<&adc13mux 0>, <&adc13mux 1>;
-	};
-
-	iio-hwmon-adc14 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 14>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 15>;
+			<&adc13mux 0>, <&adc13mux 1>,
+			<&adc 14>, <&adc 15>;
 	};
 };
 
@@ -280,7 +256,14 @@
 		m25p,fast-read;
 		label = "bmc";
 		/* spi-max-frequency = <50000000>; */
-#include "openbmc-flash-layout.dtsi"
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+#include "openbmc-flash-layout-64-alt.dtsi"
 	};
 };
 
@@ -294,6 +277,15 @@
 		m25p,fast-read;
 		label = "pnor";
 		/* spi-max-frequency = <100000000>; */
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			uefi@400000 {
+				reg = <0x400000 0x1C00000>;
+				label = "pnor-uefi";
+			};
+		};
 	};
 };
 
@@ -332,6 +324,16 @@
 	status = "okay";
 };
 
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
 &mac1 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -340,6 +342,10 @@
 
 &i2c0 {
 	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
 };
 
 &i2c1 {
@@ -348,6 +354,14 @@
 
 &i2c2 {
 	status = "okay";
+	smpro@4f {
+		compatible = "ampere,smpro";
+		reg = <0x4f>;
+	};
+	smpro@4e {
+		compatible = "ampere,smpro";
+		reg = <0x4e>;
+	};
 };
 
 &i2c3 {
@@ -399,6 +413,220 @@
 
 &i2c5 {
 	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_0_7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_8_15: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		nvmeslot_16_23: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		i2c-mux-idle-disconnect;
+
+		nvme_m2_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		nvme_m2_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+	};
+};
+
+&nvmeslot_0_7 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+
+	};
+};
+
+&nvmeslot_8_15 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_8: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_9: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_10: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_11: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_12: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_13: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_14: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_15: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&nvmeslot_16_23 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
 };
 
 &i2c6 {
@@ -426,6 +654,19 @@
 	status = "okay";
 };
 
+&i2c10 {
+	status = "okay";
+	adm1278@10 {
+		compatible = "adi,adm1278";
+		reg = <0x10>;
+	};
+
+	adm1278@11 {
+		compatible = "adi,adm1278";
+		reg = <0x11>;
+	};
+};
+
 &gfx {
 	status = "okay";
 	memory-region = <&gfx_memory>;
@@ -527,10 +768,11 @@
 	/*E0-E7*/	"","","","","","","","",
 	/*F0-F7*/	"","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD",
 			"S1_DDR_SAVE","","",
-	/*G0-G7*/	"S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","",
+	/*G0-G7*/	"host0-ready","SHD_REQ_L","","S0_OVERTEMP_L","","",
 			"","",
-	/*H0-H7*/	"","","","","","","","",
-	/*I0-I7*/	"","","S1_BMC_SPECIAL_BOOT","","","","","",
+	/*H0-H7*/	"","","","","PSU1_VIN_GOOD","PSU2_VIN_GOOD","","",
+	/*I0-I7*/	"PSU1_PRESENT","PSU2_PRESENT","S1_BMC_SPECIAL_BOOT",
+			"","","","","",
 	/*J0-J7*/	"S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","",
 			"","","","",
 	/*K0-K7*/	"","","","","","","","",
@@ -540,8 +782,9 @@
 	/*O0-O7*/	"","","","","","","","",
 	/*P0-P7*/	"","","","","","","","",
 	/*Q0-Q7*/	"","","","","","UID_BUTTON","","",
-	/*R0-R7*/	"","","BMC_EXT_HIGHTEMP_L","","","RESET_BUTTON","","",
-	/*S0-S7*/	"","","","","","","","",
+	/*R0-R7*/	"","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",
+			"OCP_MAIN_PWREN","RESET_BUTTON","","",
+	/*S0-S7*/	"","","","","rtc-battery-voltage-read-enable","","","",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
 	/*V0-V7*/	"","","","","","","","",
@@ -555,4 +798,11 @@
 			"S1_BMC_DDR_ADR","","","","",
 	/*AC0-AC7*/	"SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
 			"BMC_OCP_PG";
+
+	i2c4-o-en-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_I2C4_O_EN";
+	};
 };
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
new file mode 100644
index 000000000000..1e0e88465254
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
@@ -0,0 +1,585 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2022, Ampere Computing LLC
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt.Mitchell BMC";
+	compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	voltage_mon_reg: voltage-mon-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ltc2497_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpioI5mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(I, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	adc0mux: adc0mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc1mux: adc1mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc2mux: adc2mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc3mux: adc3mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc4mux: adc4mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc5mux: adc5mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc6mux: adc6mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc7mux: adc7mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc8mux: adc8mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc9mux: adc9mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc10mux: adc10mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc11mux: adc11mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc12mux: adc12mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc13mux: adc13mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc14mux: adc14mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc15mux: adc15mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0mux 0>, <&adc0mux 1>,
+			<&adc1mux 0>, <&adc1mux 1>,
+			<&adc2mux 0>, <&adc2mux 1>,
+			<&adc3mux 0>, <&adc3mux 1>,
+			<&adc4mux 0>, <&adc4mux 1>,
+			<&adc5mux 0>, <&adc5mux 1>,
+			<&adc6mux 0>, <&adc6mux 1>,
+			<&adc7mux 0>, <&adc7mux 1>,
+			<&adc8mux 0>, <&adc8mux 1>,
+			<&adc9mux 0>, <&adc9mux 1>,
+			<&adc10mux 0>, <&adc10mux 1>,
+			<&adc11mux 0>, <&adc11mux 1>,
+			<&adc12mux 0>, <&adc12mux 1>,
+			<&adc13mux 0>, <&adc13mux 1>,
+			<&adc14mux 0>, <&adc14mux 1>,
+			<&adc15mux 0>, <&adc15mux 1>,
+			<&adc_i2c 0>, <&adc_i2c 1>,
+			<&adc_i2c 2>, <&adc_i2c 3>,
+			<&adc_i2c 4>, <&adc_i2c 5>,
+			<&adc_i2c 6>, <&adc_i2c 7>,
+			<&adc_i2c 8>, <&adc_i2c 9>,
+			<&adc_i2c 10>, <&adc_i2c 11>,
+			<&adc_i2c 12>, <&adc_i2c 13>,
+			<&adc_i2c 14>, <&adc_i2c 15>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	psu@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	adc_i2c: adc@16 {
+		compatible = "lltc,ltc2497";
+		reg = <0x16>;
+		vref-supply = <&voltage_mon_reg>;
+		#io-channel-cells = <1>;
+	 };
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c4_bus70_chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			outlet_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu1_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			pcie_zone_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu0_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			pcie_zone_temp2: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			outlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			mb_inlet_temp1: temperature-sensor@7c {
+				compatible = "microchip,emc1413";
+				reg = <0x7c>;
+			};
+			mb_inlet_temp2: temperature-sensor@4c {
+				compatible = "microchip,emc1413";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	gpio@77 {
+		compatible = "nxp,pca9539";
+		reg = <0x77>;
+		gpio-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#gpio-cells = <2>;
+
+		bmc-ocp0-en-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "bmc-ocp0-en-n";
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	bmc_ast2600_cpu: temperature-sensor@35 {
+		compatible = "ti,tmp175";
+		reg = <0x35>;
+	};
+};
+
+&adc0 {
+	ref_voltage = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	ref_voltage = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","i2c2-reset-n","i2c6-reset-n","i2c4-reset-n",
+	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","","",
+	/*C0-C7*/	"s0-vrd-fault-n","s1-vrd-fault-n","","",
+			"irq-n","","vrd-sel","spd-sel",
+	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
+			"","bmc-ncsi-txen","","",
+	/*E0-E7*/	"","","clk50m-bmc-ncsi","","","","","",
+	/*F0-F7*/	"s0-pcp-oc-warn-n","s1-pcp-oc-warn-n","power-chassis-control",
+			"cpu-bios-recover","s0-heartbeat","hs-csout-prochot",
+			"s0-vr-hot-n","s1-vr-hot-n",
+	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","","","",
+	/*H0-H7*/	"","","wd-disable-n","power-chassis-good","","","","",
+	/*I0-I7*/	"","","","","","adc-sw","power-button","rtc-battery-voltage-read-enable",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","s0-ddr-save","soc-spi-nor-access","presence-cpu0",
+			"s0-rtc-lock","","","",
+	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
+			"jtag-dbgr-prsnt-n","s1-heartbeat","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","",
+			"led-fault","cpld-user-mode","jtag-srst-n","led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","identify-button","led-identify",
+			"s1-ddr-save","spi-nor-access","sys-pgood","presence-cpu1",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","host0-ready","host0-shd-req-n",
+			"host0-shd-ack-n","s0-overtemp-n",
+	/*W0-W7*/	"","ocp-main-pwren","ocp-pgood","",
+			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
+	/*X0-X7*/	"i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok",
+			"s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n",
+			"s1-overtemp-n","s1-spi-auth-fail-n",
+	/*Y0-Y7*/	"","","","","","","","host0-special-boot",
+	/*Z0-Z7*/	"reset-button","ps0-pgood","ps1-pgood","","","","","";
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","","","s0-soc-pgood","",
+	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
+			"uart3-mode0","uart3-mode1","uart4-mode0","uart4-mode1",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts
deleted file mode 100644
index c2ece0b91885..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts
+++ /dev/null
@@ -1,225 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Qualcomm Centriq 2400  REP AST2520";
-	compatible = "qualcomm,centriq2400-rep-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-                        <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 7>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		uid_led {
-			label = "UID_LED";
-			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
-		};
-
-		ras_error_led {
-			label = "RAS_ERROR_LED";
-			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
-		};
-
-		system_fault {
-			label = "System_fault";
-			gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-	flash@0 {
-		status = "okay";
-	};
-};
-
-&spi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi2ck_default
-			&pinctrl_spi2miso_default
-			&pinctrl_spi2mosi_default
-			&pinctrl_spi2cs0_default>;
-};
-
-&uart3 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
-	current-speed = <115200>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-
-	tmp421@1e {
-		compatible = "ti,tmp421";
-		reg = <0x1e>;
-	};
-	tmp421@2a {
-		compatible = "ti,tmp421";
-		reg = <0x2a>;
-	};
-	tmp421@4e {
-		compatible = "ti,tmp421";
-		reg = <0x4e>;
-	};
-	tmp421@1c {
-		compatible = "ti,tmp421";
-		reg = <0x1c>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-
-	tmp421@1d {
-		compatible = "ti,tmp421";
-		reg = <0x1d>;
-	};
-	tmp421@1f {
-		compatible = "ti,tmp421";
-		reg = <0x1f>;
-	};
-	tmp421@4d {
-		compatible = "ti,tmp421";
-		reg = <0x4d>;
-	};
-	tmp421@4f {
-		compatible = "ti,tmp421";
-		reg = <0x4f>;
-	};
-	nvt210@4c {
-		compatible = "nvt210";
-		reg = <0x4c>;
-	};
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <128>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-
-	pca9641@70 {
-		compatible = "nxp,pca9641";
-		reg = <0x70>;
-		i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			tmp421@1d {
-				compatible = "tmp421";
-				reg = <0x1d>;
-			};
-			adm1278@12 {
-				compatible = "adi,adm1278";
-				reg = <0x12>;
-				Rsense = <500>;
-			};
-			eeprom@50 {
-				compatible = "atmel,24c02";
-				reg = <0x50>;
-			};
-			ds1100@58 {
-				compatible = "ds1100";
-				reg = <0x58>;
-			};
-		};
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&gpio {
-	pin_gpio_c7 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
-		output;
-		line-name = "BIOS_SPI_MUX_S";
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
index 2c29ac037d32..7c6af7f226e7 100644
--- a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -10,7 +10,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
new file mode 100644
index 000000000000..c4b2efbfdf56
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+	model = "ASRock E3C246D4I BMC";
+	compatible = "asrock,e3c246d4i-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			/* BMC_HB_LED_N */
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			/* SYSTEM_FAULT_LED_N */
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		uid-button {
+			label = "uid-button";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* thermal sensor, one diode run to a disconnected header */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* FRU EEPROM */
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "BMC_MAC1_INTB", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "", "", "", "", "", "IRQ_BMC_PCH_SMI_LPC_N", "", "",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
+			"", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "SML0ALERT",
+		/*  H */ "FM_ME_RCVR_N", "O_PWROK", "SKL_CNL_R", "D4_DIMM_EVENT_3V_N",
+			"MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "BMC_CTS1", "BMC_DCD1", "BMC_DSR1", "BMC_RI1",
+			"BMC_DTR1", "BMC_RTS1", "BMC_TXD1", "BMC_RXD1",
+		/*  M */ "BMC_LAN0_DIS_N", "BMC_LAN1_DIS_N", "", "",
+			"", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SBM_PRESENT_1_N", "BMC_SBM_PRESENT_2_N",
+			"BMC_SBM_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "PCHHOT_BMC_N", "", "RSMRST",
+			"", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "PS_PWROK", /* dummy always-high signal */
+			"", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
+		/*  Z */ "CPU_CATERR_BMC_PCH_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
+			"", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
+		/* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY",
+			"", "", "", "",
+		/* AC */ "LAD0", "LAD1", "LAD2", "LAD3",
+			"CK_33M_BMC", "LFRAME", "SERIRQ", "S_PLTRST";
+
+	/* Assert BMC_READY so BIOS doesn't sit around waiting for it */
+	bmc-ready {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
new file mode 100644
index 000000000000..4554abf0c7cd
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+	model = "ASRock ROMED8HM3 BMC v1.00";
+	compatible = "asrock,romed8hm3-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* inlet temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* IPB temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+
+	/* IPB PMIC */
+	lm25066@40 {
+		compatible = "lm25066";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	/* 12VSB PMIC */
+	lm25066@41 {
+		compatible = "lm25066";
+		reg = <0x41>;
+		shunt-resistor-micro-ohms = <10000>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Baseboard FRU eeprom */
+	eeprom@50 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default>;
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0c>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0d>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0e>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "POST_COMPLETE_N", "", "", "", "", "", "", "",
+		/*  C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "PSU_FAN_FAIL_N",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "NIC_PWR_GOOD", "PRSNTB0", "PRSNTB1", "PRSNTB2",
+			"PRSNTB3", "", "3VSB_PCIE1_PG", "12V_PCIE1_PG",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "BMC_ALERT4_N",
+		/*  H */ "X24_C1_PRSNT", "X24_C2_PRSNT", "X24_C3_PRSNT", "FM_MEM_THERM_EVENT_BMC_R_N",
+			"FACMODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "", "P0_MA_DDR_QS_CS_N",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "MEZZ_PWRBRK_N", "OCP_HP_RST_EN",
+			"MAIN_PWR_EN_G", "BMC_MAIN_EN", "AUX_PWR_EN_G", "BMC_AUX_EN",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SMB_PRESENT_1_N", "BMC_SMB_PRESENT_2_N",
+			"BMC_SMB_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "THERMALTRIP_CLEAR_N", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S4_S5", "NODE_ID_1", "NODE_ID_2", "", "", "", "",
+		/*  Z */ "", "", "SYSTEM_FAULT_LED_N", "FAST_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "FM_CPU0_IBMC_THERMTRIP_N", "", "PROCHOT_L_G", "",
+			"", "", "", "",
+		/* AB */ "BMC_FORCE_SELFREFRESH", "PWRGD_OUT", "", "IRQ_BMC_PCH_SMI_LPC_N",
+			"", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
index 5ef88c377358..f75cad41ae6f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
@@ -55,7 +55,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -100,7 +100,7 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		burn-in-signal {
+		event-burn-in-signal {
 			label = "burn-in";
 			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(R, 5)>;
@@ -111,139 +111,139 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <1000>;
 
-		rear-riser1-presence {
+		event-rear-riser1-presence {
 			label = "rear-riser1-presence";
 			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
 			linux,code = <1>;
 		};
 
-		alrt-pvddq-cpu0 {
+		event-alrt-pvddq-cpu0 {
 			label = "alrt-pvddq-cpu0";
 			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
 			linux,code = <2>;
 		};
 
-		rear-riser0-presence {
+		event-rear-riser0-presence {
 			label = "rear-riser0-presence";
 			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
 			linux,code = <3>;
 		};
 
-		fault-pvddq-cpu0 {
+		event-fault-pvddq-cpu0 {
 			label = "fault-pvddq-cpu0";
 			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
 			linux,code = <4>;
 		};
 
-		alrt-pvddq-cpu1 {
+		event-alrt-pvddq-cpu1 {
 			label = "alrt-pvddq-cpu1";
 			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
 			linux,code = <5>;
 		};
 
-		fault-pvddq-cpu1 {
+		event-fault-pvddq-cpu1 {
 			label = "alrt-pvddq-cpu1";
 			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fault-pvccin-cpu1 {
+		event-fault-pvccin-cpu1 {
 			label = "fault-pvccin-cpuq";
 			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
 		};
 
-		bmc-rom0-wp {
+		event-bmc-rom0-wp {
 			label = "bmc-rom0-wp";
 			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
 			linux,code = <8>;
 		};
 
-		bmc-rom1-wp {
+		event-bmc-rom1-wp {
 			label = "bmc-rom1-wp";
 			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
 			linux,code = <9>;
 		};
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <10>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <11>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
 			linux,code = <12>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <13>;
 		};
 
-		fan4-presence {
+		event-fan4-presence {
 			label = "fan4-presence";
 			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <14>;
 		};
 
-		fan5-presence {
+		event-fan5-presence {
 			label = "fan5-presence";
 			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <15>;
 		};
 
-		front-bp1-presence {
+		event-front-bp1-presence {
 			label = "front-bp1-presence";
 			gpios = <&pca1 8 GPIO_ACTIVE_LOW>;
 			linux,code = <16>;
 		};
 
-		rear-bp-presence {
+		event-rear-bp-presence {
 			label = "rear-bp-presence";
 			gpios = <&pca1 9 GPIO_ACTIVE_LOW>;
 			linux,code = <17>;
 		};
 
-		fault-pvccin-cpu0 {
+		event-fault-pvccin-cpu0 {
 			label = "fault-pvccin-cpu0";
 			gpios = <&pca1 10 GPIO_ACTIVE_LOW>;
 			linux,code = <18>;
 		};
 
-		alrt-p1v05-pvcc {
+		event-alrt-p1v05-pvcc {
 			label = "alrt-p1v05-pvcc1";
 			gpios = <&pca1 11 GPIO_ACTIVE_LOW>;
 			linux,code = <19>;
 		};
 
-		fault-p1v05-pvccio {
+		event-fault-p1v05-pvccio {
 			label = "alrt-p1v05-pvcc1";
 			gpios = <&pca1 12 GPIO_ACTIVE_LOW>;
 			linux,code = <20>;
 		};
 
-		alrt-p1v8-pvccio {
+		event-alrt-p1v8-pvccio {
 			label = "alrt-p1v8-pvccio";
 			gpios = <&pca1 13 GPIO_ACTIVE_LOW>;
 			linux,code = <21>;
 		};
 
-		fault-p1v8-pvccio {
+		event-fault-p1v8-pvccio {
 			label = "fault-p1v8-pvccio";
 			gpios = <&pca1 14 GPIO_ACTIVE_LOW>;
 			linux,code = <22>;
 		};
 
-		front-bp0-presence {
+		event-front-bp0-presence {
 			label = "front-bp0-presence";
 			gpios = <&pca1 15 GPIO_ACTIVE_LOW>;
 			linux,code = <23>;
@@ -260,6 +260,13 @@
 		spi-max-frequency = <50000000>;
 #include "openbmc-flash-layout-64.dtsi"
 	};
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
 };
 
 &spi1 {
@@ -278,6 +285,11 @@
 	status = "okay";
 };
 
+&wdt2 {
+	status = "okay";
+	aspeed,alt-boot;
+};
+
 &gpio {
 	status = "okay";
 	gpio-line-names =
diff --git a/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts b/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts
new file mode 100644
index 000000000000..6600f7e9bf5e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+#define EFUSE_OUTPUT(n)					\
+	efuse##n {					\
+		compatible = "regulator-output";	\
+		vout-supply = <&efuse##n>;		\
+	}
+
+#define __stringify(x) #x
+
+#define EFUSE(hexaddr, num)							\
+	efuse@##hexaddr {							\
+		compatible = "lm25066";						\
+		reg = <0x##hexaddr>;						\
+		shunt-resistor-micro-ohms = <675>;				\
+		regulators {							\
+			efuse##num: vout0 {					\
+				regulator-name = __stringify(efuse##num##-reg);	\
+			};							\
+		};								\
+	}
+
+/{
+	model = "Delta Power AHE-50DC";
+	compatible = "delta,ahe50dc-bmc", "aspeed,ast2400";
+
+	aliases {
+		serial4 = &uart5;
+
+		/*
+		 * pca9541-arbitrated logical i2c buses are numbered as the
+		 * corresponding physical bus plus 20
+		 */
+		i2c20 = &i2carb0;
+		i2c21 = &i2carb1;
+		i2c22 = &i2carb2;
+		i2c23 = &i2carb3;
+		i2c24 = &i2carb4;
+		i2c26 = &i2carb6;
+		i2c27 = &i2carb7;
+		i2c28 = &i2carb8;
+		i2c32 = &i2carb12;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,115200n8 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		panic {
+			gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "panic";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+
+	EFUSE_OUTPUT(01);
+	EFUSE_OUTPUT(02);
+	EFUSE_OUTPUT(03);
+	EFUSE_OUTPUT(04);
+	EFUSE_OUTPUT(05);
+	EFUSE_OUTPUT(06);
+	EFUSE_OUTPUT(07);
+	EFUSE_OUTPUT(08);
+	EFUSE_OUTPUT(09);
+	EFUSE_OUTPUT(10);
+	EFUSE_OUTPUT(11);
+	EFUSE_OUTPUT(12);
+	EFUSE_OUTPUT(13);
+	EFUSE_OUTPUT(14);
+	EFUSE_OUTPUT(15);
+	EFUSE_OUTPUT(16);
+	EFUSE_OUTPUT(17);
+	EFUSE_OUTPUT(18);
+	EFUSE_OUTPUT(19);
+	EFUSE_OUTPUT(20);
+	EFUSE_OUTPUT(21);
+	EFUSE_OUTPUT(22);
+	EFUSE_OUTPUT(23);
+	EFUSE_OUTPUT(24);
+	EFUSE_OUTPUT(25);
+	EFUSE_OUTPUT(26);
+	EFUSE_OUTPUT(27);
+	EFUSE_OUTPUT(28);
+	EFUSE_OUTPUT(29);
+	EFUSE_OUTPUT(30);
+	EFUSE_OUTPUT(31);
+	EFUSE_OUTPUT(32);
+	EFUSE_OUTPUT(33);
+	EFUSE_OUTPUT(34);
+	EFUSE_OUTPUT(35);
+	EFUSE_OUTPUT(36);
+	EFUSE_OUTPUT(37);
+	EFUSE_OUTPUT(38);
+	EFUSE_OUTPUT(39);
+	EFUSE_OUTPUT(40);
+	EFUSE_OUTPUT(41);
+	EFUSE_OUTPUT(42);
+	EFUSE_OUTPUT(43);
+	EFUSE_OUTPUT(44);
+	EFUSE_OUTPUT(45);
+	EFUSE_OUTPUT(46);
+	EFUSE_OUTPUT(47);
+	EFUSE_OUTPUT(48);
+	EFUSE_OUTPUT(49);
+	EFUSE_OUTPUT(50);
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "flash0";
+		spi-max-frequency = <50000000>; // 50 MHz
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@79 {
+		compatible = "nxp,pca9541";
+		reg = <0x79>;
+
+		i2carb0: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57 */
+			EFUSE(10, 03);
+			EFUSE(11, 04);
+			EFUSE(12, 01);
+			EFUSE(13, 02);
+			EFUSE(14, 13);
+			EFUSE(15, 14);
+			EFUSE(16, 15);
+			EFUSE(17, 16);
+			EFUSE(40, 12);
+			EFUSE(41, 11);
+			EFUSE(42, 10);
+			EFUSE(43, 09);
+			EFUSE(44, 08);
+			EFUSE(45, 07);
+			EFUSE(46, 05);
+			EFUSE(47, 06);
+			EFUSE(50, 17);
+			EFUSE(51, 18);
+			EFUSE(52, 20);
+			EFUSE(53, 19);
+			EFUSE(54, 22);
+			EFUSE(55, 21);
+			EFUSE(56, 24);
+			EFUSE(57, 23);
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@72 {
+		compatible = "nxp,pca9541";
+		reg = <0x72>;
+
+		i2carb1: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@73 {
+		compatible = "nxp,pca9541";
+		reg = <0x73>;
+
+		i2carb2: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@74 {
+		compatible = "nxp,pca9541";
+		reg = <0x74>;
+
+		i2carb3: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7a {
+		compatible = "nxp,pca9541";
+		reg = <0x7a>;
+
+		i2carb4: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9534";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57, 59, 5a */
+			EFUSE(10, 27);
+			EFUSE(11, 28);
+			EFUSE(12, 25);
+			EFUSE(13, 26);
+			EFUSE(14, 37);
+			EFUSE(15, 38);
+			EFUSE(16, 39);
+			EFUSE(17, 40);
+			EFUSE(40, 36);
+			EFUSE(41, 35);
+			EFUSE(42, 34);
+			EFUSE(43, 33);
+			EFUSE(44, 32);
+			EFUSE(45, 31);
+			EFUSE(46, 29);
+			EFUSE(47, 30);
+			EFUSE(50, 41);
+			EFUSE(51, 42);
+			EFUSE(52, 44);
+			EFUSE(53, 43);
+			EFUSE(54, 46);
+			EFUSE(55, 45);
+			EFUSE(56, 48);
+			EFUSE(57, 47);
+			EFUSE(59, 49);
+			EFUSE(5a, 50);
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@75 {
+		compatible = "nxp,pca9541";
+		reg = <0x75>;
+
+		i2carb6: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@76 {
+		compatible = "nxp,pca9541";
+		reg = <0x76>;
+
+		i2carb7: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7c {
+		compatible = "nxp,pca9541";
+		reg = <0x7c>;
+
+		i2carb8: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fancontrol@30 {
+				compatible = "delta,ahe50dc-fan";
+				reg = <0x30>;
+			};
+
+			/* Baseboard FRU eeprom */
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@71 {
+		compatible = "nxp,pca9541";
+		reg = <0x71>;
+
+		i2carb12: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "", "", "", "", "", "", "", "",
+		/*  B */ "", "", "", "", "", "", "", "",
+		/*  C */ "RESET_PEER_N", "HEARTBEAT_OUT", "", "", "", "", "", "",
+		/*  D */ "", "", "", "", "", "", "", "",
+		/*  E */ "DOOM_N", "", "", "", "", "LED_PWR_BLUE", "", "",
+		/*  F */ "", "", "", "", "", "", "", "",
+		/*  G */ "", "", "", "", "", "", "", "",
+		/*  H */ "", "", "", "", "", "", "", "",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "", "", "BMC_ID", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "", "", "", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "LED_GREEN", "", "LED_RED", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "", "",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "HEARTBEAT_IN", "BOARDREV0", "BOARDREV1", "",
+		/*  Z */ "", "", "", "", "", "", "", "",
+		/* AA */ "", "", "", "", "", "", "", "",
+		/* AB */ "", "", "", "";
+
+	/*
+	 * I don't rightly know what this GPIO really *is*, but setting it to
+	 * zero causes the fans to run at full speed, after which setting it
+	 * back to one causes a power output glitch, so install a hog to keep
+	 * it at one as a failsafe to ensure nothing accidentally touches it.
+	 */
+	doom-guardrail {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
new file mode 100644
index 000000000000..e899de681f47
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
@@ -0,0 +1,1077 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Bletchley BMC";
+	compatible = "facebook,bletchley-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		bootargs = "console=ttyS4,57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	spi1_gpio: spi1-gpio {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpmdev@0 {
+			compatible = "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+
+	switchphy: ethernet-phy@0 {
+		// Fixed link
+	};
+
+	front_gpio_leds {
+		compatible = "gpio-leds";
+		sys_log_id {
+			default-state = "off";
+			gpios = <&front_leds 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fan_gpio_leds {
+		compatible = "gpio-leds";
+		fan0_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 8 GPIO_ACTIVE_HIGH>;
+		};
+		fan1_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 9 GPIO_ACTIVE_HIGH>;
+		};
+		fan2_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 10 GPIO_ACTIVE_HIGH>;
+		};
+		fan3_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 11 GPIO_ACTIVE_HIGH>;
+		};
+		fan0_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 12 GPIO_ACTIVE_HIGH>;
+		};
+		fan1_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 13 GPIO_ACTIVE_HIGH>;
+		};
+		fan2_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 14 GPIO_ACTIVE_HIGH>;
+		};
+		fan3_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sled1_gpio_leds {
+		compatible = "gpio-leds";
+		sled1_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled1_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled2_gpio_leds {
+		compatible = "gpio-leds";
+		sled2_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled2_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled3_gpio_leds {
+		compatible = "gpio-leds";
+		sled3_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled3_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled4_gpio_leds {
+		compatible = "gpio-leds";
+		sled4_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled4_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled5_gpio_leds {
+		compatible = "gpio-leds";
+		sled5_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled5_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled6_gpio_leds {
+		compatible = "gpio-leds";
+		sled6_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled6_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		presence-sled1 {
+			label = "presence-sled1";
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 2)>;
+		};
+		presence-sled2 {
+			label = "presence-sled2";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+		presence-sled3 {
+			label = "presence-sled3";
+			gpios = <&gpio0 ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 4)>;
+		};
+		presence-sled4 {
+			label = "presence-sled4";
+			gpios = <&gpio0 ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 5)>;
+		};
+		presence-sled5 {
+			label = "presence-sled5";
+			gpios = <&gpio0 ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 6)>;
+		};
+		presence-sled6 {
+			label = "presence-sled6";
+			gpios = <&gpio0 ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 7)>;
+		};
+	};
+
+	vbus_sled1: vbus_sled1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled2: vbus_sled2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled3: vbus_sled3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled4: vbus_sled4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled4";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled5: vbus_sled5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled5";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled6: vbus_sled6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled6";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&switchphy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled1_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED1_SWD_MUX", "SLED1_XRES_SWD_N",
+		"SLED1_CLKREQ_N", "SLED1_PCIE_PWR_EN";
+	};
+
+	sled1_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 0) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
+		"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
+		"SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
+		"SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
+	};
+
+	sled1_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled1_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 0) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled1>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled2_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED2_SWD_MUX", "SLED2_XRES_SWD_N",
+		"SLED2_CLKREQ_N", "SLED2_PCIE_PWR_EN";
+	};
+
+	sled2_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 1) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
+		"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
+		"SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
+		"SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
+	};
+
+	sled2_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled2_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 1) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled2>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled3_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED3_SWD_MUX", "SLED3_XRES_SWD_N",
+		"SLED3_CLKREQ_N", "SLED3_PCIE_PWR_EN";
+	};
+
+	sled3_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 2) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
+		"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
+		"SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
+		"SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
+	};
+
+	sled3_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled3_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled3>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled4_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED4_SWD_MUX", "SLED4_XRES_SWD_N",
+		"SLED4_CLKREQ_N", "SLED4_PCIE_PWR_EN";
+	};
+
+	sled4_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 3) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
+		"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
+		"SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
+		"SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
+	};
+
+	sled4_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled4_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(S, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled4>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled5_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED5_SWD_MUX", "SLED5_XRES_SWD_N",
+		"SLED5_CLKREQ_N", "SLED5_PCIE_PWR_EN";
+	};
+
+	sled5_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 4) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
+		"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
+		"SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
+		"SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
+	};
+
+	sled5_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled5_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(Y, 3) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled5>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled6_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED6_SWD_MUX", "SLED6_XRES_SWD_N",
+		"SLED6_CLKREQ_N", "SLED6_PCIE_PWR_EN";
+	};
+
+	sled6_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT",
+		"SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT",
+		"SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY",
+		"SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6";
+	};
+
+	sled6_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled6_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled6>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+
+	rtc@51 {
+		/* in-chip rtc disabled, use external rtc (battery-backed) */
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	front_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-fault-identify","power-p5v-stby-good",
+		"power-p1v0-dvdd-good","power-p1v0-avdd-good",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	adm1278@11 {
+		compatible = "adi,adm1278";
+		reg = <0x11>;
+		shunt-resistor-micro-ohms = <300>;
+		adi,volt-curr-sample-average = <128>;
+		adi,power-sample-average = <128>;
+	};
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+
+	tmp421@4d {
+		compatible = "ti,tmp421";
+		reg = <0x4d>;
+	};
+
+	fan_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"presence-fan0","presence-fan1",
+		"presence-fan2","presence-fan3",
+		"power-fan0-good","power-fan1-good",
+		"power-fan2-good","power-fan3-good",
+		"","","","",
+		"","","","";
+	};
+};
+
+&i2c13 {
+	multi-master;
+	aspeed,hw-timeout-ms = <1000>;
+	status = "okay";
+
+	//USB Debug Connector
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiov2_unbiased_default>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N",
+			"SEL_SPI2_MUX","SPI2_MUX1",
+			"SPI2_MUX2","SPI2_MUX3",
+			"","FUSB302_SLED3_INT_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"BMC_SLED1_STCK","BMC_SLED2_STCK",
+			"BMC_SLED3_STCK","BMC_SLED4_STCK",
+			"BMC_SLED5_STCK","BMC_SLED6_STCK",
+			"","",
+	/*G0-G7*/	"BSM_FRU_WP","SWITCH_FRU_MUX","","FM_SOL_UART_CH_SEL",
+			"PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","",
+	/*H0-H7*/	"presence-riser1","presence-riser2",
+			"presence-sled1","presence-sled2",
+			"presence-sled3","presence-sled4",
+			"presence-sled5","presence-sled6",
+	/*I0-I7*/	"REV_ID0","",
+			"REV_ID1","REV_ID2",
+			"","BSM_FLASH_WP_STATUS",
+			"BMC_TPM_PRES_N","FUSB302_SLED6_INT_N",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","BMC_RTC_INT","","",
+	/*M0-M7*/	"ALERT_SLED1_N","ALERT_SLED2_N",
+			"ALERT_SLED3_N","ALERT_SLED4_N",
+			"ALERT_SLED5_N","ALERT_SLED6_N",
+			"","USB_DEBUG_PWR_BTN_N",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"","","","",
+			"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
+	/*P0-P7*/	"","","","","","","","BMC_HEARTBEAT",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","BAT_DETECT",
+			"BMC_BT_WP0_N","BMC_BT_WP1_N","","FUSB302_SLED4_INT_N",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"PWRGD_CNS_PSU","RST_BMC_MVL_N",
+			"P12V_AUX_ALERT1_N","PSU_PRSNT",
+			"USB2_SEL0_A","USB2_SEL1_A",
+			"USB2_SEL0_B","USB2_SEL1_B",
+	/*W0-W7*/	"RST_FRONT_IOEXP_N","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"BMC_SELF_HW_RST","BSM_PRSNT_N",
+			"BSM_FLASH_LATCH_N","FUSB302_SLED5_INT_N",
+			"","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&adc0 {
+	vref = <1800>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio0 {
+	status = "okay";
+	/* TODO: Add Marvell 88E6191X */
+};
+
+&mdio3 {
+	status = "okay";
+	/* TODO: Add Marvell 88X3310 */
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_gpiov2_unbiased_default: gpiov2 {
+		pins = "AD14";
+		bias-disable;
+	};
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
new file mode 100644
index 000000000000..5cd060029ea9
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
@@ -0,0 +1,544 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Cloudripper BMC";
+	compatible = "facebook,cloudripper-bmc", "aspeed,ast2600";
+
+	aliases {
+		/*
+		 * PCA9548 (1-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (3-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * PDB (Power Delivery Board).
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * PCA9548 (15-0076) provides 8 channels connecting to
+		 * FCM (Fan Controller Module).
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <2>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+			   <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+
+		eeprom@1 {
+			compatible = "atmel,at93c46d";
+			spi-max-frequency = <250000>;
+			data-size = <16>;
+			spi-cs-high;
+			reg = <1>;
+		};
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/*
+ * "mdio1" is connected to the MDC/MDIO interface of the on-board
+ * management switch (whose ports are connected to BMC, Host and front
+ * panel ethernet port).
+ */
+&mdio1 {
+	status = "okay";
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy1: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0d>;
+	};
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&i2c0 {
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c1 {
+	/*
+	 * PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c2 {
+	/*
+	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+	 * Controller Module).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	/*
+	 * PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c6 {
+	lp5012@14 {
+		compatible = "ti,lp5012";
+		reg = <0x14>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		multi-led@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			color = <LED_COLOR_ID_MULTI>;
+			function = LED_FUNCTION_ACTIVITY;
+			label = "sys";
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+
+		multi-led@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			color = <LED_COLOR_ID_MULTI>;
+			function = LED_FUNCTION_ACTIVITY;
+			label = "fan";
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+
+		multi-led@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			color = <LED_COLOR_ID_MULTI>;
+			function = LED_FUNCTION_ACTIVITY;
+			label = "psu";
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+
+		multi-led@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			color = <LED_COLOR_ID_MULTI>;
+			function = LED_FUNCTION_ACTIVITY;
+			label = "scm";
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+	};
+};
+
+&i2c8 {
+	/*
+	 * PCA9548 (8-0070) provides 8 channels connecting to PDB (Power
+	 * Delivery Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c15 {
+	/*
+	 * PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan
+	 * Controller Module).
+	 */
+	i2c-switch@76 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+
+		imux48: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux49: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux50: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux51: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux52: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux53: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux54: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux55: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
index 2fb8b147f489..90a3f485c67a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
@@ -280,7 +280,7 @@
 
 	chosen {
 		stdout-path = &uart1;
-		bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlyprintk";
+		bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlycon";
 	};
 
 	ast-adc-hwmon {
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
new file mode 100644
index 000000000000..b5cd4c7800b0
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Elbert BMC";
+	compatible = "facebook,elbert-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+
+		/*
+		 * 8 child channels of PCA9548 2-0075.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * 8 child channels of PCA9548 5-0075.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c2 {
+	i2c-switch@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c5 {
+	i2c-switch@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+/*
+ * BMC's "mac3" controller is connected to BCM53134P's IMP_RGMII port
+ * directly (fixed link, no PHY in between).
+ * Note: BMC's "mdio0" controller is connected to BCM53134P's MDIO
+ * interface, and the MDIO channel will be enabled in dts later, when
+ * BCM53134 is added to "bcm53xx" DSA driver.
+ */
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
new file mode 100644
index 000000000000..6b319f34a9b9
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
@@ -0,0 +1,1251 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Fuji BMC";
+	compatible = "facebook,fuji-bmc", "aspeed,ast2600";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0077) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * PCA9548 (24-0071) provides 8 channels connecting to
+		 * PDB-Left.
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * PCA9548 (25-0072) provides 8 channels connecting to
+		 * PDB-Right.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+
+		/*
+		 * PCA9548 (26-0076) provides 8 channels connecting to
+		 * FCM1.
+		 */
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * PCA9548 (27-0076) provides 8 channels connecting to
+		 * FCM2.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+
+		/*
+		 * PCA9548 (40-0076) provides 8 channels connecting to
+		 * PIM1.
+		 */
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * PCA9548 (41-0076) provides 8 channels connecting to
+		 * PIM2.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+
+		/*
+		 * PCA9548 (42-0076) provides 8 channels connecting to
+		 * PIM3.
+		 */
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * PCA9548 (43-0076) provides 8 channels connecting to
+		 * PIM4.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+
+		/*
+		 * PCA9548 (44-0076) provides 8 channels connecting to
+		 * PIM5.
+		 */
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * PCA9548 (45-0076) provides 8 channels connecting to
+		 * PIM6.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+
+		/*
+		 * PCA9548 (46-0076) provides 8 channels connecting to
+		 * PIM7.
+		 */
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * PCA9548 (47-0076) provides 8 channels connecting to
+		 * PIM8.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <3>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+			   <0>,	/* device reg=<1> does not exist */
+			   <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+
+		eeprom@2 {
+			compatible = "atmel,at93c46d";
+			spi-max-frequency = <250000>;
+			data-size = <16>;
+			spi-cs-high;
+			reg = <2>;
+		};
+	};
+};
+
+&i2c0 {
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c2 {
+	/*
+	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+	 * Controller Module).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				shunt-resistor-micro-ohms = <1500>;
+			};
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	/*
+	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					lp5012@14 {
+						compatible = "ti,lp5012";
+						reg = <0x14>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						multi-led@0 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <0>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "sys";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@1 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <1>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "fan";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@2 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <2>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "psu";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@3 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <3>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "smb";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+					};
+				};
+
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/*
+	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0d>;
+	};
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts
index dcf213472749..60e875ac2461 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts
@@ -51,7 +51,3 @@
 &vhub {
 	status = "okay";
 };
-
-&adc {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
new file mode 100644
index 000000000000..7a53f54833a0
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Greatlakes BMC";
+	compatible = "facebook,greatlakes-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
+				<&adc1 5>, <&adc1 6>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	no-hw-checksum;
+	use-ncsi;
+	mlx,multi-host;
+	ncsi-ctrl,start-redo-probe;
+	ncsi-ctrl,no-channel-monitor;
+	ncsi-package = <1>;
+	ncsi-channel = <1>;
+	ncsi-rexmit = <1>;
+	ncsi-timeout = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+	mctp-controller;
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	// NIC EEPROM
+	eeprom@50 {
+		compatible = "st,24c32";
+		reg = <0x50>;
+	};
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	temperature-sensor@4f {
+		compatible = "lm75";
+		reg = <0x4f>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc0 {
+	ref_voltage = <2500>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+			&pinctrl_adc2_default &pinctrl_adc3_default
+			&pinctrl_adc4_default &pinctrl_adc5_default
+			&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	ref_voltage = <2500>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
+			&pinctrl_adc11_default &pinctrl_adc12_default
+			&pinctrl_adc13_default &pinctrl_adc14_default>;
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
+
+	gpio-line-names =
+	/*A0-A7*/ "","","","","","","","",
+	/*B0-B7*/ "power-bmc-nic","presence-ocp-debug",
+		  "power-bmc-slot1","power-bmc-slot2",
+		  "power-bmc-slot3","power-bmc-slot4","","",
+	/*C0-C7*/ "presence-ocp-nic","","","reset-cause-nic-primary",
+		  "reset-cause-nic-secondary","","","",
+	/*D0-D7*/ "","","","","","","","",
+	/*E0-E7*/ "","","","","","","","",
+	/*F0-F7*/ "slot1-bmc-reset-button","slot2-bmc-reset-button",
+		  "slot3-bmc-reset-button","slot4-bmc-reset-button",
+		  "","","","presence-emmc",
+	/*G0-G7*/ "","","","","","","","",
+	/*H0-H7*/ "","","","",
+		  "presence-mb-slot1","presence-mb-slot2",
+		  "presence-mb-slot3","presence-mb-slot4",
+	/*I0-I7*/ "","","","","","","bb-bmc-button","",
+	/*J0-J7*/ "","","","","","","","",
+	/*K0-K7*/ "","","","","","","","",
+	/*L0-L7*/ "","","","","","","","",
+	/*M0-M7*/ "","power-nic-bmc-enable","","usb-bmc-enable","","reset-cause-usb-hub","","",
+	/*N0-N7*/ "","","","","bmc-ready","","","",
+	/*O0-O7*/ "","","","","","","fan0-bmc-cpld-enable","fan1-bmc-cpld-enable",
+	/*P0-P7*/ "fan2-bmc-cpld-enable","fan3-bmc-cpld-enable",
+		  "reset-cause-pcie-slot1","reset-cause-pcie-slot2",
+		  "reset-cause-pcie-slot3","reset-cause-pcie-slot4","","",
+	/*Q0-Q7*/ "","","","","","","","",
+	/*R0-R7*/ "","","","","","","","",
+	/*S0-S7*/ "","","power-p5v-usb","presence-bmc-tpm","","","","",
+	/*T0-T7*/ "","","","","","","","",
+	/*U0-U7*/ "","","","","","","","GND",
+	/*V0-V7*/ "bmc-slot1-ac-button","bmc-slot2-ac-button",
+		  "bmc-slot3-ac-button","bmc-slot4-ac-button",
+		  "","","","",
+	/*W0-W7*/ "","","","","","","","",
+	/*X0-X7*/ "","","","","","","","",
+	/*Y0-Y7*/ "","","","reset-cause-emmc","","","","",
+	/*Z0-Z7*/ "","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
index 9eb23e874f19..230d16cd9967 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
@@ -265,19 +265,19 @@
 		};
 
 		/*
-		 * FIT image: 59.5 MB.
+		 * FIT image: 55.5 MB.
 		 */
 		fit@80000 {
-			reg = <0x80000 0x3b80000>;
+			reg = <0x80000 0x3780000>;
 			label = "fit";
 		};
 
 		/*
-		 * "data0" partition (4MB) is reserved for persistent
+		 * "data0" partition (8MB) is reserved for persistent
 		 * data store.
 		 */
 		data0@3800000 {
-			reg = <0x3c00000 0x400000>;
+			reg = <0x3800000 0x800000>;
 			label = "data0";
 		};
 
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
index cd18641d5c23..b6b16356f571 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
@@ -37,7 +37,7 @@
 	};
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -507,6 +507,11 @@
 &i2c7 {
 	status = "okay";
 	//HSC, AirMax Conn A
+	adm1278@45 {
+		compatible = "adm1275";
+		reg = <0x45>;
+		shunt-resistor-micro-ohms = <250>;
+	};
 };
 
 &i2c8 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
index 39c6be91d53f..584efa528450 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
@@ -12,6 +12,11 @@
 		stdout-path = &uart3;
 		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
 	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
 };
 
 &wdt2 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
index 2dcfeae3c92a..6624855d8ebd 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
@@ -23,10 +23,6 @@
 	status = "disabled";
 };
 
-&adc {
-	status = "okay";
-};
-
 &pwm_tacho {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
index 63a3dd548f30..ed305948386f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
@@ -67,7 +67,7 @@
 	 * full-duplex SPI transactions are not supported by ASPEED SPI
 	 * Controllers.
 	 */
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		status = "okay";
 		compatible = "spi-gpio";
 		#address-cells = <1>;
@@ -91,53 +91,7 @@
  * Both firmware flashes are 128MB on Wedge400 BMC.
  */
 &fmc_flash0 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/*
-		 * u-boot partition: 384KB.
-		 */
-		u-boot@0 {
-			reg = <0x0 0x60000>;
-			label = "u-boot";
-		};
-
-		/*
-		 * u-boot environment variables: 128KB.
-		 */
-		u-boot-env@60000 {
-			reg = <0x60000 0x20000>;
-			label = "env";
-		};
-
-		/*
-		 * FIT image: 123.5 MB.
-		 */
-		fit@80000 {
-			reg = <0x80000 0x7b80000>;
-			label = "fit";
-		};
-
-		/*
-		 * "data0" partition (4MB) is reserved for persistent
-		 * data store.
-		 */
-		data0@7c00000 {
-			reg = <0x7c00000 0x400000>;
-			label = "data0";
-		};
-
-		/*
-		 * "flash0" partition (covering the entire flash) is
-		 * explicitly created to avoid breaking legacy applications.
-		 */
-		flash0@0 {
-			reg = <0x0 0x8000000>;
-			label = "flash0";
-		};
-	};
+#include "facebook-bmc-flash-layout-128.dtsi"
 };
 
 &fmc_flash1 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
index 8864e9c312a8..6bf2ff85a40e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
@@ -207,11 +207,16 @@
 
 &i2c12 {
 	status = "okay";
-	//MEZZ_FRU
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-		pagesize = <32>;
+};
+
+&i2c13 {
+	status = "okay";
+	// Debug Card
+	multi-master;
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
new file mode 100644
index 000000000000..81902cbe662c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
@@ -0,0 +1,915 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Bonnell";
+	compatible = "ibm,bonnell-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+
+		serial4 = &uart5;
+		i2c16 = &i2c11mux0chn0;
+		i2c17 = &i2c11mux0chn1;
+		i2c18 = &i2c11mux0chn2;
+		i2c19 = &i2c11mux0chn3;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/	"","","","","","","","",
+		/*B0-B7*/	"","","","","","","checkstop","",
+		/*C0-C7*/	"","","","","","","","",
+		/*D0-D7*/	"","","","","","","","",
+		/*E0-E7*/	"","","","","","","","",
+		/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","","",
+		/*G0-G7*/	"fan0","fan1","","","","","","",
+		/*H0-H7*/	"","","rear-enc-id0","rear-enc-fault0","","","","",
+		/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+		/*J0-J7*/	"","","","","","","","",
+		/*K0-K7*/	"","","","","","","","",
+		/*L0-L7*/	"","","","","","","","",
+		/*M0-M7*/	"","","","","","","","",
+		/*N0-N7*/	"","","","","","","","",
+		/*O0-O7*/	"","","","usb-power","","","","",
+		/*P0-P7*/	"","","","","","","","",
+		/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+		/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+		/*S0-S7*/	"presence-ps0","presence-ps1","","","power-ffs-sync-history","","","",
+		/*T0-T7*/	"","","","","","","","",
+		/*U0-U7*/	"","","","","","","","",
+		/*V0-V7*/	"","","","","","","","",
+		/*W0-W7*/	"","","","","","","","",
+		/*X0-X7*/	"","","","","","","","",
+		/*Y0-Y7*/	"","","","","","","","",
+		/*Z0-Z7*/	"","","","","","","","";
+
+	usb_power {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OMI01 */
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OMI23 */
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OMI45 */
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OMI67 */
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"",
+			"",
+			"DASD_BP_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@5a {
+		compatible = "acbel,fsg032";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "acbel,fsg032";
+		reg = <0x5b>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+		};
+
+		fan1: fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"APSS_RESET_N",
+			"",
+			"N_MODE_CPU_N",
+			"",
+			"",
+			"P10_DCM_PRESENT",
+			"";
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "BOOT_RCVRY_TWI",
+			"BOOT_RCVRY_UART",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"PE_SWITCH_RSTB_N";
+	};
+
+	tmp435@4c {
+		compatible = "ti,tmp435";
+		reg = <0x4c>;
+	};
+
+	pca9849@75 {
+		compatible = "nxp,pca9849";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c11mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c11mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 6bd876657bb8..c6f8f20914d1 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -44,6 +44,72 @@
 		i2c415 = &cfam3_i2c15;
 		i2c416 = &cfam3_i2c16;
 		i2c417 = &cfam3_i2c17;
+		i2c500 = &cfam4_i2c0;
+		i2c501 = &cfam4_i2c1;
+		i2c510 = &cfam4_i2c10;
+		i2c511 = &cfam4_i2c11;
+		i2c512 = &cfam4_i2c12;
+		i2c513 = &cfam4_i2c13;
+		i2c514 = &cfam4_i2c14;
+		i2c515 = &cfam4_i2c15;
+		i2c602 = &cfam5_i2c2;
+		i2c603 = &cfam5_i2c3;
+		i2c610 = &cfam5_i2c10;
+		i2c611 = &cfam5_i2c11;
+		i2c614 = &cfam5_i2c14;
+		i2c615 = &cfam5_i2c15;
+		i2c616 = &cfam5_i2c16;
+		i2c617 = &cfam5_i2c17;
+		i2c700 = &cfam6_i2c0;
+		i2c701 = &cfam6_i2c1;
+		i2c710 = &cfam6_i2c10;
+		i2c711 = &cfam6_i2c11;
+		i2c712 = &cfam6_i2c12;
+		i2c713 = &cfam6_i2c13;
+		i2c714 = &cfam6_i2c14;
+		i2c715 = &cfam6_i2c15;
+		i2c802 = &cfam7_i2c2;
+		i2c803 = &cfam7_i2c3;
+		i2c810 = &cfam7_i2c10;
+		i2c811 = &cfam7_i2c11;
+		i2c814 = &cfam7_i2c14;
+		i2c815 = &cfam7_i2c15;
+		i2c816 = &cfam7_i2c16;
+		i2c817 = &cfam7_i2c17;
+
+		i2c16 = &i2c4mux0chn0;
+		i2c17 = &i2c4mux0chn1;
+		i2c18 = &i2c4mux0chn2;
+		i2c19 = &i2c5mux0chn0;
+		i2c20 = &i2c5mux0chn1;
+		i2c21 = &i2c5mux0chn2;
+		i2c22 = &i2c5mux0chn3;
+		i2c23 = &i2c6mux0chn0;
+		i2c24 = &i2c6mux0chn1;
+		i2c25 = &i2c6mux0chn2;
+		i2c26 = &i2c6mux0chn3;
+		i2c27 = &i2c14mux0chn0;
+		i2c28 = &i2c14mux0chn1;
+		i2c29 = &i2c14mux0chn2;
+		i2c30 = &i2c14mux0chn3;
+		i2c31 = &i2c14mux1chn0;
+		i2c32 = &i2c14mux1chn1;
+		i2c33 = &i2c14mux1chn2;
+		i2c34 = &i2c14mux1chn3;
+		i2c35 = &i2c15mux0chn0;
+		i2c36 = &i2c15mux0chn1;
+		i2c37 = &i2c15mux0chn2;
+		i2c38 = &i2c15mux0chn3;
+		i2c39 = &i2c15mux1chn0;
+		i2c40 = &i2c15mux1chn1;
+		i2c41 = &i2c15mux1chn2;
+		i2c42 = &i2c15mux1chn3;
+		i2c43 = &i2c15mux2chn0;
+		i2c44 = &i2c15mux2chn1;
+		i2c45 = &i2c15mux2chn2;
+		i2c46 = &i2c15mux2chn3;
+		i2c47 = &i2c8mux0chn0;
+		i2c48 = &i2c8mux0chn1;
 
 		serial4 = &uart5;
 
@@ -63,6 +129,22 @@
 		spi41 = &cfam3_spi1;
 		spi42 = &cfam3_spi2;
 		spi43 = &cfam3_spi3;
+		spi50 = &cfam4_spi0;
+		spi51 = &cfam4_spi1;
+		spi52 = &cfam4_spi2;
+		spi53 = &cfam4_spi3;
+		spi60 = &cfam5_spi0;
+		spi61 = &cfam5_spi1;
+		spi62 = &cfam5_spi2;
+		spi63 = &cfam5_spi3;
+		spi70 = &cfam6_spi0;
+		spi71 = &cfam6_spi1;
+		spi72 = &cfam6_spi2;
+		spi73 = &cfam6_spi3;
+		spi80 = &cfam7_spi0;
+		spi81 = &cfam7_spi1;
+		spi82 = &cfam7_spi2;
+		spi83 = &cfam7_spi3;
 	};
 
 	chosen {
@@ -80,22 +162,27 @@
 		#size-cells = <1>;
 		ranges;
 
-		/* LPC FW cycle bridge region requires natural alignment */
-		flash_memory: region@b8000000 {
+		event_log: tcg_event_log@b3d00000 {
 			no-map;
-			reg = <0xb8000000 0x04000000>; /* 64M */
+			reg = <0xb3d00000 0x100000>;
 		};
 
-		/* 48MB region from the end of flash to start of vga memory */
-		ramoops@bc000000 {
+		ramoops@b3e00000 {
 			compatible = "ramoops";
-			reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
 			record-size = <0x8000>;
 			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
 			pmsg-size = <0x8000>;
 			max-reason = <3>; /* KMSG_DUMP_EMERG */
 		};
 
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
 		/* VGA region is dictated by hardware strapping */
 		vga_memory: region@bf000000 {
 			no-map;
@@ -103,12 +190,2216 @@
 			reg = <0xbf000000 0x01000000>; /* 16M */
 		};
 	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+			linux,code = <15>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* RTC battery fault LED at the back */
+		led-rtc-battery {
+			gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		/* BMC Card fault LED at the back */
+		led-bmc {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure Identify LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"USERSPACE_RSTIND_BUFF","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
+	/*S0-S7*/	"","","","","power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/   "","","","","","","","";
+
+	usb_power {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pca1: pca9552@62 {
+		compatible = "nxp,pca9552";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-ps0",
+			"presence-ps1",
+			"presence-ps2",
+			"presence-ps3",
+			"presence-pdb",
+			"presence-tpm",
+			"", "",
+			"presence-cp0",
+			"presence-cp1",
+			"presence-cp2",
+			"presence-cp3",
+			"presence-dasd",
+			"presence-lcd-op",
+			"presence-base-op",
+			"";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+
+	power-supply@6d {
+		compatible = "ibm,cffps";
+		reg = <0x6d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	pca2: pca9552@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card1",
+			"presence-cable-card2",
+			"presence-cable-card3",
+			"presence-cable-card4",
+			"presence-cable-card5",
+			"expander-cable-card1",
+			"expander-cable-card2",
+			"expander-cable-card3",
+			"expander-cable-card4",
+			"expander-cable-card5";
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c01: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c01-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c01-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca_cable_card_c02: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c02-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c02-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c03: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c03-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c03-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca3: pca9552@66 {
+		compatible = "nxp,pca9552";
+		reg = <0x66>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card6",
+			"presence-cable-card7",
+			"presence-cable-card8",
+			"presence-cable-card9",
+			"presence-cable-card10",
+			"presence-cable-card11",
+			"expander-cable-card6",
+			"expander-cable-card7",
+			"expander-cable-card8",
+			"expander-cable-card9",
+			"expander-cable-card10",
+			"expander-cable-card11";
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca_cable_card_c04: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c04-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c04-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c05: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c05-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c05-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c06: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c06-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c06-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			pca_cable_card_c07: pca9551@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c07-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c07-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+			};
+
+			pca_cable_card_c08: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c08-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c08-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c09: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c09-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c09-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			pca_cable_card_c10: pca9551@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c11: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c11-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c11-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+
+	pca_pcie_slot: pca9552@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@1 {
+			label = "pcieslot-c01";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "pcieslot-c02";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcieslot-c03";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcieslot-c04";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcieslot-c05";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcieslot-c06";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcieslot-c07";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcieslot-c08";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcieslot-c09";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcieslot-c10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcieslot-c11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	pic0_dimm: pca9552@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm8";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm9";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic1_dimm: pca9552@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm24";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm25";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm26";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm27";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm28";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm29";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm30";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm31";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic2_dimm: pca9552@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm32";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm33";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm34";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm35";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm36";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm37";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm38";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm39";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm40";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm41";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm42";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm43";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm44";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm45";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm46";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm47";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic3_dimm: pca9552@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm48";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm49";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm50";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm51";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm52";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm53";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm54";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm55";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm56";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm57";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm58";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm59";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm60";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm61";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm62";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm63";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic0_vrm_misc: pca9552@34 {
+		compatible = "ibm,pca9552";
+		reg = <0x34>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "planar";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "tpm";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "cpu3-c61";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "cpu0-c14";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "opencapi-connector3";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "opencapi-connector4";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "opencapi-connector5";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "vrm4";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "vrm5";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "vrm6";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "vrm7";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "vrm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "vrm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "vrm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "vrm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic1_vrm_misc: pca9552@35 {
+		compatible = "ibm,pca9552";
+		reg = <0x35>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "dasd-backplane";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "power-distribution";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "cpu1-c19";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "cpu2-c56";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "opencapi-connector0";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "opencapi-connector1";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "opencapi-connector2";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "vrm0";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "vrm1";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "vrm2";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "vrm3";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "vrm8";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "vrm9";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "vrm10";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "vrm11";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c14 {
+	multi-master;
+	status = "okay";
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		idle-state = <1>;
+
+		i2c14mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "atmel,24c32";
+				reg = <0x51>;
+			};
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			pca_oppanel: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "front-sys-id0";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "front-check-log0";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "front-enc-fault1";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "front-sys-pwron0";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			max31785@52 {
+				compatible = "maxim,max31785a";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x52>;
+
+				fan@0 {
+					compatible = "pmbus-fan";
+					reg = <0>;
+					tach-pulses = <2>;
+				};
+
+				fan@1 {
+					compatible = "pmbus-fan";
+					reg = <1>;
+					tach-pulses = <2>;
+				};
+
+				fan@2 {
+					compatible = "pmbus-fan";
+					reg = <2>;
+					tach-pulses = <2>;
+				};
+
+				fan@3 {
+					compatible = "pmbus-fan";
+					reg = <3>;
+					tach-pulses = <2>;
+				};
+			};
+
+			pca_fan_nvme: pca9552@60 {
+				compatible = "nxp,pca9552";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "nvme0";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "nvme1";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "nvme2";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "nvme3";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@4 {
+					label = "nvme4";
+					reg = <4>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@5 {
+					label = "nvme5";
+					reg = <5>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@6 {
+					label = "nvme6";
+					reg = <6>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@7 {
+					label = "nvme7";
+					reg = <7>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@8 {
+					label = "nvme8";
+					reg = <8>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@9 {
+					label = "nvme9";
+					reg = <9>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@10 {
+					label = "fan0";
+					reg = <10>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@11 {
+					label = "fan1";
+					reg = <11>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@12 {
+					label = "fan2";
+					reg = <12>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@13 {
+					label = "fan3";
+					reg = <13>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			pca0: pca9552@61 {
+				compatible = "nxp,pca9552";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x61>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				gpio-line-names =
+					"","","","",
+					"","","","",
+					"","","","",
+					"presence-fan3",
+					"presence-fan2",
+					"presence-fan1",
+					"presence-fan0";
+			};
+		};
+	};
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c14mux1chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux1chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-switch@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux2chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c15mux2chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
 };
 
 &ehci1 {
 	status = "okay";
 };
 
+&uhci {
+	status = "okay";
+};
+
 &emmc_controller {
 	status = "okay";
 };
@@ -119,6 +2410,7 @@
 
 &emmc {
 	status = "okay";
+	clk-phase-mmc-hs200 = <210>, <228>;
 };
 
 &fsim0 {
@@ -133,7 +2425,7 @@
 	 */
 	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
 
-	cfam@0,0 {
+	cfam@0,0 {	/* DCM0_C0 */
 		reg = <0 0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -264,6 +2556,11 @@
 
 			fsi_occ0: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -277,7 +2574,7 @@
 };
 
 &fsi_hub0 {
-	cfam@1,0 {
+	cfam@1,0 { /* DCM0_C1 */
 		reg = <1 0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -408,6 +2705,11 @@
 
 			fsi_occ1: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -421,7 +2723,7 @@
 		};
 	};
 
-	cfam@2,0 {
+	cfam@2,0 { /* DCM1_C0 */
 		reg = <2 0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -552,6 +2854,11 @@
 
 			fsi_occ2: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -565,7 +2872,7 @@
 		};
 	};
 
-	cfam@3,0 {
+	cfam@3,0 { /* DCM1_C1 */
 		reg = <3 0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -696,6 +3003,11 @@
 
 			fsi_occ3: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -708,6 +3020,602 @@
 			no-scan-on-init;
 		};
 	};
+
+	cfam@4,0 { /* DCM2_C0 */
+		reg = <4 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <4>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+			};
+
+			cfam4_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+			};
+
+			cfam4_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam4_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam4_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam4_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam4_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam4_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ4: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub4: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@5,0 { /* DCM2_C1 */
+		reg = <5 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <5>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+			};
+
+			cfam5_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+			};
+
+			cfam5_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam5_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam5_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam5_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam5_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam5_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ5: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub5: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@6,0 { /* DCM3_C0 */
+		reg = <6 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <6>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+			};
+
+			cfam6_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+			};
+
+			cfam6_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam6_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam6_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam6_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam6_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam6_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ6: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub6: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@7,0 { /* DCM3_C1 */
+		reg = <7 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <7>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+			};
+
+			cfam7_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+			};
+
+			cfam7_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam7_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam7_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam7_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam7_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam7_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ7: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub7: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
 };
 
 /* Legacy OCC numbering (to get rid of when userspace is fixed) */
@@ -727,10 +3635,30 @@
 	reg = <4>;
 };
 
+&fsi_occ4 {
+	reg = <5>;
+};
+
+&fsi_occ5 {
+	reg = <6>;
+};
+
+&fsi_occ6 {
+	reg = <7>;
+};
+
+&fsi_occ7 {
+	reg = <8>;
+};
+
 &ibt {
 	status = "okay";
 };
 
+&uart2 {
+	status = "okay";
+};
+
 &vuart1 {
 	status = "okay";
 };
@@ -744,11 +3672,6 @@
 	memory-region = <&flash_memory>;
 };
 
-&kcs4 {
-	compatible = "openbmc,mctp-lpc";
-	status = "okay";
-};
-
 &mac2 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -769,7 +3692,32 @@
 	use-ncsi;
 };
 
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
 &xdma {
 	status = "okay";
 	memory-region = <&vga_memory>;
 };
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts
new file mode 100644
index 000000000000..f5f5b18c113a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-rainier-4u.dts"
+
+/ {
+	model = "Rainier 1S4U";
+};
+
+&max {
+	/delete-node/ fan3;
+	/delete-node/ fan5;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts
index 291f7d6c9979..342546a3c0f5 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts
@@ -19,19 +19,3 @@
 		reg = <0x6b>;
 	};
 };
-
-&fan0 {
-	tach-pulses = <4>;
-};
-
-&fan1 {
-	tach-pulses = <4>;
-};
-
-&fan2 {
-	tach-pulses = <4>;
-};
-
-&fan3 {
-	tach-pulses = <4>;
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 6c9804d2f3b4..7162e65b8115 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -12,11 +12,55 @@
 	compatible = "ibm,rainier-bmc", "aspeed,ast2600";
 
 	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+		i2c300 = &cfam2_i2c0;
+		i2c301 = &cfam2_i2c1;
+		i2c310 = &cfam2_i2c10;
+		i2c311 = &cfam2_i2c11;
+		i2c312 = &cfam2_i2c12;
+		i2c313 = &cfam2_i2c13;
+		i2c314 = &cfam2_i2c14;
+		i2c315 = &cfam2_i2c15;
+		i2c402 = &cfam3_i2c2;
+		i2c403 = &cfam3_i2c3;
+		i2c410 = &cfam3_i2c10;
+		i2c411 = &cfam3_i2c11;
+		i2c414 = &cfam3_i2c14;
+		i2c415 = &cfam3_i2c15;
+		i2c416 = &cfam3_i2c16;
+		i2c417 = &cfam3_i2c17;
+
 		serial4 = &uart5;
 		i2c16 = &i2c2mux0;
 		i2c17 = &i2c2mux1;
 		i2c18 = &i2c2mux2;
 		i2c19 = &i2c2mux3;
+		i2c20 = &i2c4mux0chn0;
+		i2c21 = &i2c4mux0chn1;
+		i2c22 = &i2c4mux0chn2;
+		i2c23 = &i2c5mux0chn0;
+		i2c24 = &i2c5mux0chn1;
+		i2c25 = &i2c6mux0chn0;
+		i2c26 = &i2c6mux0chn1;
+		i2c27 = &i2c6mux0chn2;
+		i2c28 = &i2c6mux0chn3;
+		i2c29 = &i2c11mux0chn0;
+		i2c30 = &i2c11mux0chn1;
 
 		spi10 = &cfam0_spi0;
 		spi11 = &cfam0_spi1;
@@ -30,11 +74,15 @@
 		spi31 = &cfam2_spi1;
 		spi32 = &cfam2_spi2;
 		spi33 = &cfam2_spi3;
+		spi40 = &cfam3_spi0;
+		spi41 = &cfam3_spi1;
+		spi42 = &cfam3_spi2;
+		spi43 = &cfam3_spi3;
 	};
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200n8";
+		bootargs = "console=ttyS4,115200n8 earlycon";
 	};
 
 	memory@80000000 {
@@ -47,20 +95,23 @@
 		#size-cells = <1>;
 		ranges;
 
-		flash_memory: region@b8000000 {
-			no-map;
-			reg = <0xb8000000 0x04000000>; /* 64M */
-		};
-
-		ramoops@bc000000 {
+		ramoops@b3e00000 {
 			compatible = "ramoops";
-			reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
 			record-size = <0x8000>;
 			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
 			pmsg-size = <0x8000>;
 			max-reason = <3>; /* KMSG_DUMP_EMERG */
 		};
 
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
 		vga_memory: region@bf000000 {
 			no-map;
 			compatible = "shared-dma-pool";
@@ -68,34 +119,6 @@
 		};
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio0 ASPEED_GPIO(S, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(S, 0)>;
-		};
-
-		ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio0 ASPEED_GPIO(S, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(S, 1)>;
-		};
-
-		ps2-presence {
-			label = "ps2-presence";
-			gpios = <&gpio0 ASPEED_GPIO(S, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(S, 2)>;
-		};
-
-		ps3-presence {
-			label = "ps3-presence";
-			gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(S, 3)>;
-		};
-	};
-
 	i2c2mux: i2cmux {
 		compatible = "i2c-mux-gpio";
 		#address-cells = <1>;
@@ -131,12 +154,96 @@
 			reg = <3>;
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC Card fault LED at the back */
+		bmc-ingraham0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure ID LED at the back */
+		rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
 };
 
 &ehci1 {
 	status = "okay";
 };
 
+&uhci {
+	status = "okay";
+};
+
 &gpio0 {
 	gpio-line-names =
 	/*A0-A7*/	"","","","","","","","",
@@ -144,44 +251,40 @@
 	/*C0-C7*/	"","","","","","","","",
 	/*D0-D7*/	"","","","","","","","",
 	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
 	/*G0-G7*/	"","","","","","","","",
-	/*H0-H7*/	"","","","","","","","",
-	/*I0-I7*/	"","","","","","","","",
+	/*H0-H7*/	"","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
 	/*J0-J7*/	"","","","","","","","",
 	/*K0-K7*/	"","","","","","","","",
 	/*L0-L7*/	"","","","","","","","",
 	/*M0-M7*/	"","","","","","","","",
 	/*N0-N7*/	"","","","","","","","",
 	/*O0-O7*/	"","","","usb-power","","","","",
-	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"cfam-reset","","","","","","","",
-	/*R0-R7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","pcieslot-power","","","",
+	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
 	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
-				"","","","",
+	"power-ffs-sync-history","","","",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
 	/*V0-V7*/	"","","","","","","","",
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
+	/*Z0-Z7*/	"","","","","","","","";
 
-	pin_mclr_vpp {
+	i2c3_mux_oe_n {
 		gpio-hog;
-		gpios = <ASPEED_GPIO(P, 7) GPIO_OPEN_DRAIN>;
+		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
 		output-high;
-		line-name = "mclr_vpp";
+		line-name = "I2C3_MUX_OE_N";
 	};
 
-	i2c3_mux_oe_n {
+	usb_power {
 		gpio-hog;
-		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
 		output-high;
-		line-name = "I2C3_MUX_OE_N";
 	};
 };
 
@@ -226,6 +329,38 @@
 			reg = <0x1800 0x400>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OMI01 */
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OMI23 */
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
 		};
 
 		fsi2spi@1c00 {
@@ -309,6 +444,11 @@
 
 			fsi_occ0: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -317,8 +457,6 @@
 			reg = <0x3400 0x400>;
 			#address-cells = <2>;
 			#size-cells = <0>;
-
-			no-scan-on-init;
 		};
 	};
 };
@@ -340,6 +478,38 @@
 			reg = <0x1800 0x400>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OMI45 */
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OMI67 */
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
 		};
 
 		fsi2spi@1c00 {
@@ -423,6 +593,11 @@
 
 			fsi_occ1: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -452,6 +627,38 @@
 			reg = <0x1800 0x400>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			cfam2_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+			};
+
+			cfam2_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+			};
+
+			cfam2_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam2_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam2_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam2_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam2_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam2_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
 		};
 
 		fsi2spi@1c00 {
@@ -535,6 +742,11 @@
 
 			fsi_occ2: occ {
 				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
 			};
 		};
 
@@ -547,6 +759,155 @@
 			no-scan-on-init;
 		};
 	};
+
+	cfam@3,0 {
+		reg = <3 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <3>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+			};
+
+			cfam3_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+			};
+
+			cfam3_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam3_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam3_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam3_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam3_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam3_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ3: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub3: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
 };
 
 /* Legacy OCC numbering (to get rid of when userspace is fixed) */
@@ -562,6 +923,10 @@
 	reg = <3>;
 };
 
+&fsi_occ3 {
+	reg = <4>;
+};
+
 &ibt {
 	status = "okay";
 };
@@ -574,20 +939,24 @@
 		reg = <0x51>;
 	};
 
-	tca9554@40 {
+	tca_pres1: tca9554@20{
 		compatible = "ti,tca9554";
-		reg = <0x40>;
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		smbus0-hog {
-			gpio-hog;
-			gpios = <4 GPIO_ACTIVE_HIGH>;
-			output-high;
-			line-name = "smbus0";
-		};
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"DASD_BP2_PRESENT_N",
+			"DASD_BP1_PRESENT_N",
+			"DASD_BP0_PRESENT_N";
 	};
-
 };
 
 &i2c1 {
@@ -610,6 +979,24 @@
 		compatible = "ibm,cffps";
 		reg = <0x69>;
 	};
+
+	pca_pres1: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
+			"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
+			"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
+			"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
+			"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
+			"", "", "", "", "", "";
+	};
 };
 
 &i2c4 {
@@ -630,19 +1017,72 @@
 		reg = <0x4a>;
 	};
 
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
+	pca9546@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
 
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
 
-	eeprom@52 {
-		compatible = "atmel,24c64";
-		reg = <0x52>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard0-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard0-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
 	};
 };
 
@@ -659,14 +1099,87 @@
 		reg = <0x49>;
 	};
 
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
+	pca9546@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
 
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
+		i2c5mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard3-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard3-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard4-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard4-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
 	};
 };
 
@@ -688,24 +1201,57 @@
 		reg = <0x4b>;
 	};
 
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
+	pca9546@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
 
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
 
-	eeprom@52 {
-		compatible = "atmel,24c64";
-		reg = <0x52>;
-	};
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
 
-	eeprom@53 {
-		compatible = "atmel,24c64";
-		reg = <0x53>;
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
 	};
 };
 
@@ -713,134 +1259,636 @@
 	multi-master;
 	status = "okay";
 
-	si7021-a20@20 {
-		compatible = "silabs,si7020";
-		reg = <0x20>;
-	};
+	pca9552@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "pcieslot0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "pcieslot1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "pcieslot2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcieslot3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcieslot4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "cpu1";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "cpu-vrm1";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "lcd-russel";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
 	};
 
-	max31785@52 {
-		compatible = "maxim,max31785a";
-		reg = <0x52>;
+	pca9552@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		fan0: fan@0 {
-			compatible = "pmbus-fan";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm0";
 			reg = <0>;
-			tach-pulses = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		fan1: fan@1 {
-			compatible = "pmbus-fan";
+		led@1 {
+			label = "ddimm1";
 			reg = <1>;
-			tach-pulses = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		fan2: fan@2 {
-			compatible = "pmbus-fan";
+		led@2 {
+			label = "ddimm2";
 			reg = <2>;
-			tach-pulses = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		fan3: fan@3 {
-			compatible = "pmbus-fan";
+		led@3 {
+			label = "ddimm3";
 			reg = <3>;
-			tach-pulses = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm8";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm9";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 	};
 
-	pca0: pca9552@61 {
-		compatible = "nxp,pca9552";
-		reg = <0x61>;
+	pca9552@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		gpio@0 {
+		led@0 {
+			label = "ddimm16";
 			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		gpio@1 {
+		led@1 {
+			label = "ddimm17";
 			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		gpio@2 {
+		led@2 {
+			label = "ddimm18";
 			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		gpio@3 {
+		led@3 {
+			label = "ddimm19";
 			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		gpio@4 {
+		led@4 {
+			label = "ddimm20";
 			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		gpio@5 {
+		led@5 {
+			label = "ddimm21";
 			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		gpio@6 {
+		led@6 {
+			label = "ddimm22";
 			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		gpio@7 {
+		led@7 {
+			label = "ddimm23";
 			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		gpio@8 {
+		led@8 {
+			label = "ddimm24";
 			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		gpio@9 {
+		led@9 {
+			label = "ddimm25";
 			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		gpio@10 {
+		led@10 {
+			label = "ddimm26";
 			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		gpio@11 {
+		led@11 {
+			label = "ddimm27";
 			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		gpio@12 {
+		led@12 {
+			label = "ddimm28";
 			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		gpio@13 {
+		led@13 {
+			label = "ddimm29";
 			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		gpio@14 {
+		led@14 {
+			label = "ddimm30";
 			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 
-		gpio@15 {
+		led@15 {
+			label = "ddimm31";
 			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "planar";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "cpu0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "dasd-pyramid0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "dasd-pyramid1";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "dasd-pyramid2";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "cpu0-vrm0";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "rtc-battery";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "base-blyth";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcieslot6";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcieslot7";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcieslot8";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "pcieslot9";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "pcieslot10";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pcieslot11";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "tpm-wilson";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	max: max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+		};
+
+		fan1: fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+		};
+
+		fan2: fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+		};
+
+		fan3: fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+		};
+
+		fan4: fan@4 {
+			compatible = "pmbus-fan";
+			reg = <4>;
+			tach-pulses = <2>;
+		};
+
+		fan5: fan@5 {
+			compatible = "pmbus-fan";
+			reg = <5>;
+			tach-pulses = <2>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca0: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "fan0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "fan1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "fan2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "fan3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "fan4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "fan5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
 		};
 	};
 
@@ -899,93 +1947,35 @@
 		reg = <0x51>;
 	};
 
-	pca1: pca9552@61 {
+	pca_pres3: pca9552@60 {
 		compatible = "nxp,pca9552";
-		reg = <0x61>;
+		reg = <0x60>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
+		gpio-line-names =
+			"", "", "", "", "", "", "", "",
+			"", "", "", "", "", "", "power-config-full-load", "";
+	};
 
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
+	pca_pres2: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
 
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
+		gpio-line-names =
+			"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+			"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+			"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+			"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+			"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+			"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+			"", "", "", "";
 	};
 
 };
@@ -1041,19 +2031,76 @@
 		reg = <0x49>;
 	};
 
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
+	pca9546@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
 
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
 	};
 };
 
 &i2c12 {
 	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
 };
 
 &i2c13 {
@@ -1063,6 +2110,80 @@
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
 };
 
 &i2c14 {
@@ -1072,6 +2193,80 @@
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme8";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme9";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme10";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme11";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme12";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme13";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme14";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme15";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
 };
 
 &i2c15 {
@@ -1081,6 +2276,84 @@
 		compatible = "atmel,24c64";
 		reg = <0x50>;
 	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
 };
 
 &vuart1 {
@@ -1116,31 +2389,32 @@
 	use-ncsi;
 };
 
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-128.dtsi"
-	};
-};
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
 
-&spi1 {
-	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
 
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-		spi-max-frequency = <100000000>;
-	};
+&wdt2 {
+	status = "okay";
 };
 
 &xdma {
 	status = "okay";
 	memory-region = <&vga_memory>;
 };
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
index 07593897fc9a..208b0f094ed9 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
@@ -3,6 +3,7 @@
 #include "aspeed-g5.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
 #include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "FP5280G2 BMC";
@@ -10,7 +11,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -72,19 +73,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(B, 3)>;
 		};
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 0)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 1)>;
@@ -96,49 +97,49 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
 			linux,code = <1>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
 			linux,code = <2>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <3>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <4>;
 		};
 
-		fan4-presence {
+		event-fan4-presence {
 			label = "fan4-presence";
 			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
 			linux,code = <5>;
 		};
 
-		fan5-presence {
+		event-fan5-presence {
 			label = "fan5-presence";
 			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fan6-presence {
+		event-fan6-presence {
 			label = "fan6-presence";
 			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
 		};
 
-		fan7-presence {
+		event-fan7-presence {
 			label = "fan7-presence";
 			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <8>;
@@ -245,7 +246,7 @@
 		label = "bmc";
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout.dtsi"
+#include "openbmc-flash-layout-64.dtsi"
 	};
 };
 
@@ -902,4 +903,10 @@
 
 };
 
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
 #include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
new file mode 100644
index 000000000000..b3c1e3ba5831
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "NF5280M6 BMC";
+	compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+	    compatible = "gpio-leds";
+
+		bmc_alive {
+			label = "bmc_alive";
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+			led-pattern = <1000 1000>;
+		};
+
+		front-fan {
+			label = "front-fan";
+			gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>;
+		};
+
+	    front-psu {
+			label = "front-psu";
+			gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>;
+		};
+
+	    front-syshot {
+			label = "front-syshot";
+			gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		front-memory {
+			label = "front-memory";
+			gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			label = "identify";
+			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		<&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&gpio {
+	status = "okay";
+	/* Enable GPIOE0 and GPIOE2 pass-through by default */
+	pinctrl-names = "pass-through";
+	pinctrl-0 = <&pinctrl_gpie0_default
+			&pinctrl_gpie2_default>;
+	gpio-line-names =
+	/*A0-A7*/	"","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","",
+	/*B0-B7*/	"BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N",
+				"FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N",
+				"FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2",
+				"BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT",
+	/*E0-E7*/	"FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3",
+				"FM_BOARD_ID4","FM_BOARD_ID5","","",
+	/*F0-F7*/	"PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N",
+				"BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL",
+				"RST_GLB_RST_WARN_N",
+	/*G0-G7*/	"IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC",
+				"BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N",
+	/*H0-H7*/	"JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6",
+				"FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N",
+	/*I0-I7*/	"FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N",
+				"FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","",
+	/*J0-J7*/	"FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N",
+				"VGA_HSYNC","VGA_VSYNC","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","SYS_UART_TXD1","SYS_UART_RXD1",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N",
+	/*R0-R7*/	"SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N",
+				"DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N",
+				"RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N",
+	/*S0-S7*/	"BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","",
+				"GPIOS5_BMC","","GPIOS7_BMC",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","",
+				"GPIOZ5","","",
+	/*AA0-AA7*/	"FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC",
+				"FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT",
+	/*AB0-AB7*/	"RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&i2c0 {
+	/* FP_LCD */
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		label = "fru";
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "inlet";
+	};
+
+	tmp112@49 {
+		compatible = "ti,tmp112";
+		reg = <0x49>;
+		label = "outlet";
+	};
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+
+	pca9548@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+	};
+
+	pca9548@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+	};
+};
+
+&i2c4 {
+	/* IPMB */
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	adm1278@33 {
+		compatible = "adi,adm1293";
+		reg = <0x33>;
+	};
+
+	adm1278@32 {
+		compatible = "adi,adm1293";
+		reg = <0x32>;
+	};
+
+	adm1278@20 {
+		compatible = "adi,adm1293";
+		reg = <0x20>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca0: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca1: pca9555@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca2: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca3: pca9555@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c9 {
+	/* cpld */
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+
+	pca4: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca5: pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "inspur,ipsps1";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "inspur,ipsps1";
+		reg = <0x59>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default &pinctrl_pwm5_default
+		&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+	};
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&kcs4 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca4>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+	 &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+	 &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+	 &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+	 &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+	 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vuart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
index 80c92e065a10..5a98a19f445e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
@@ -11,7 +11,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "earlyprintk";
+		bootargs = "earlycon";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
index 6e9baf3bba53..d5b7d28cda88 100644
--- a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
@@ -10,7 +10,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "earlyprintk";
+		bootargs = "earlycon";
 	};
 
 	memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts b/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts
new file mode 100644
index 000000000000..caf66651e5b5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 Inventec Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+       model = "TRANSFORMERS BMC";
+       compatible = "inventec,transformer-bmc", "aspeed,ast2600";
+
+       aliases {
+               serial4 = &uart5;
+       };
+
+       chosen {
+               stdout-path = &uart5;
+               bootargs = "console=ttyS4,115200n8";
+       };
+
+       memory@80000000 {
+               device_type = "memory";
+               reg = <0x80000000 0x80000000>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               // UID led
+               uid {
+                       label = "UID_LED";
+                       gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+               };
+
+               // Heart beat led
+               heartbeat {
+                       label = "HB_LED";
+                       gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       ethphy0: ethernet-phy@0 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+       };
+};
+
+&mac3 {
+       status = "okay";
+       phy-mode = "rgmii";
+       phy-handle = <&ethphy0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&fmc {
+       status = "okay";
+
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+#include "openbmc-flash-layout.dtsi"
+       };
+
+       flash@1 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc2";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+       };
+};
+
+&spi1 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_spi1_default>;
+
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bios";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <1>;
+               spi-rx-bus-width = <1>;
+       };
+};
+
+&wdt1 {
+       status = "okay";
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&uart5 {
+       status = "okay";
+};
+
+&i2c0 {
+       status = "okay";
+
+       //Set bmc' slave address;
+       bmc_slave@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c2 {
+       status = "okay";
+};
+
+&i2c3 {
+       // FRU AT24C512C-SSHM-T
+       status = "okay";
+       eeprom@50 {
+               compatible = "atmel,24c512";
+               reg = <0x50>;
+               pagesize = <128>;
+       };
+};
+
+&i2c5 {
+       status = "okay";
+};
+
+&i2c6 {
+       status = "okay";
+
+       tmp75@49 {
+               compatible = "ti,tmp75";
+               reg = <0x49>;
+       };
+
+       tmp75@4f {
+               compatible = "ti,tmp75";
+               reg = <0x4f>;
+       };
+
+       tmp468@48 {
+               compatible = "ti,tmp468";
+               reg = <0x48>;
+       };
+};
+
+&i2c7 {
+       status = "okay";
+       adm1278@40 {
+               compatible = "adi,adm1278";
+               reg = <0x40>;
+       };
+};
+
+
+&i2c8 {
+       // FRU AT24C512C-SSHM-T
+       status = "okay";
+
+       eeprom@51 {
+               compatible = "atmel,24c512";
+               reg = <0x51>;
+               pagesize = <128>;
+       };
+
+       eeprom@53 {
+               compatible = "atmel,24c512";
+               reg = <0x53>;
+               pagesize = <128>;
+       };
+};
+
+&i2c9 {
+       // M.2
+       status = "okay";
+};
+
+&i2c10 {
+       // I2C EXPANDER
+       status = "okay";
+
+       i2c-switch@71 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x71>;
+       };
+
+       i2c-switch@73 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x73>;
+       };
+};
+
+&i2c11 {
+       // I2C EXPANDER
+       status = "okay";
+
+       i2c-switch@70 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x70>;
+
+               pcie_eeprom_riser1: i2c@0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+
+               pcie_eeprom_riser2: i2c@1 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <1>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+
+               pcie_eeprom_riser3: i2c@2 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <2>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+       };
+};
+
+&i2c12 {
+       status = "okay";
+
+       psu0:psu0@58 {
+               compatible = "pmbus";
+               reg = <0x58>;
+       };
+};
+
+&gpio0 {
+       status = "okay";
+       gpio-line-names =
+       /*A0-A7*/   "","","","","","","","",
+       /*B0-B7*/   "presence-ps0","power-chassis-good","","","","","presence-ps1","",
+       /*C0-C7*/   "","","","","","","","",
+       /*D0-D7*/   "","","","","","","","",
+       /*E0-E7*/   "","","","","","","","",
+       /*F0-F7*/   "","","","","power-chassis-control","","","",
+       /*G0-G7*/   "","","jtag-mux","","","","","",
+       /*H0-H7*/   "","","","","reset-button","power-button","","",
+       /*I0-I7*/   "","","","","","","","",
+       /*J0-J7*/   "","","","","","","","",
+       /*K0-K7*/   "","","","","","","","",
+       /*L0-L7*/   "","","","","","","","",
+       /*M0-M7*/   "","","","","","","","",
+       /*N0-N7*/   "","","","","","","","",
+       /*O0-O7*/   "","","","","","","","",
+       /*P0-P7*/   "","","","tck-mux","","","","",
+       /*Q0-Q7*/   "","","","","","","","",
+       /*R0-R7*/   "","","","","","","","",
+       /*S0-S7*/   "","","","","","","","",
+       /*T0-T7*/   "","","","","","","","",
+       /*U0-U7*/   "","nmi-button","","","","","","",
+       /*V0-V7*/   "","","","","power-config-full-load","","","",
+       /*W0-W7*/   "","","","","","","","",
+       /*X0-X7*/   "","","","","","","","",
+       /*Y0-Y7*/   "","","","","","","","",
+       /*Z0-Z7*/   "","","","","","","","",
+       /*AA0-AA7*/ "","","","","","","","",
+       /*AB0-AB7*/ "","","","","","","","",
+       /*AC0-AC7*/ "","","","","","","","";
+};
+
+&lpc_snoop {
+       status = "okay";
+       snoop-ports = <0x80>;
+};
+
+&emmc_controller {
+       status = "okay";
+};
+
+&emmc {
+       status = "okay";
+       non-removable;
+       max-frequency = <52000000>;
+       bus-width = <8>;
+};
+
+&vhub {
+       status = "okay";
+       aspeed,vhub-downstream-ports = <7>;
+       aspeed,vhub-generic-endpoints = <21>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usb2ad_default>;
+};
+
+&rtc {
+       status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
index c29e5f4d86ad..8f543cca7c21 100644
--- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
@@ -27,7 +27,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
index 084c455ad4cb..bcc1820f5c07 100644
--- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
@@ -27,7 +27,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts b/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
index 73319917cb74..3ef8358ff764 100644
--- a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
@@ -11,7 +11,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@40000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
index 42b37a204241..c0847636f20b 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
@@ -11,7 +11,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
deleted file mode 100644
index 577c211c469e..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ /dev/null
@@ -1,1347 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Mihawk BMC";
-	compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
-
-	aliases {
-		i2c215 = &bus6_mux215;
-		i2c216 = &bus6_mux216;
-		i2c217 = &bus6_mux217;
-		i2c218 = &bus6_mux218;
-		i2c219 = &bus6_mux219;
-		i2c220 = &bus6_mux220;
-		i2c221 = &bus6_mux221;
-		i2c222 = &bus6_mux222;
-		i2c223 = &bus7_mux223;
-		i2c224 = &bus7_mux224;
-		i2c225 = &bus7_mux225;
-		i2c226 = &bus7_mux226;
-		i2c227 = &bus7_mux227;
-		i2c228 = &bus7_mux228;
-		i2c229 = &bus7_mux229;
-		i2c230 = &bus7_mux230;
-		i2c231 = &bus9_mux231;
-		i2c232 = &bus9_mux232;
-		i2c233 = &bus9_mux233;
-		i2c234 = &bus9_mux234;
-		i2c235 = &bus9_mux235;
-		i2c236 = &bus9_mux236;
-		i2c237 = &bus9_mux237;
-		i2c238 = &bus9_mux238;
-		i2c239 = &bus10_mux239;
-		i2c240 = &bus10_mux240;
-		i2c241 = &bus10_mux241;
-		i2c242 = &bus10_mux242;
-		i2c243 = &bus10_mux243;
-		i2c244 = &bus10_mux244;
-		i2c245 = &bus10_mux245;
-		i2c246 = &bus10_mux246;
-		i2c247 = &bus12_mux247;
-		i2c248 = &bus12_mux248;
-		i2c249 = &bus12_mux249;
-		i2c250 = &bus12_mux250;
-		i2c251 = &bus13_mux251;
-		i2c252 = &bus13_mux252;
-		i2c253 = &bus13_mux253;
-		i2c254 = &bus13_mux254;
-		i2c255 = &bus13_mux255;
-		i2c256 = &bus13_mux256;
-		i2c257 = &bus13_mux257;
-		i2c258 = &bus13_mux258;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		air-water {
-			label = "air-water";
-			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 6)>;
-		};
-
-		checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 2)>;
-		};
-
-		ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 0)>;
-		};
-		id-button {
-			label = "id-button";
-			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 1)>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-		};
-
-		fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
-			linux,code = <10>;
-		};
-
-		fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
-			linux,code = <11>;
-		};
-
-		fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
-			linux,code = <12>;
-		};
-
-		fan4-presence {
-			label = "fan4-presence";
-			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
-			linux,code = <13>;
-		};
-
-		fan5-presence {
-			label = "fan5-presence";
-			gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
-			linux,code = <14>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		front-fault {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
-		};
-
-		power-button {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		front-id {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
-		};
-
-
-		fan0 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
-		};
-
-		fan1 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
-		};
-
-		fan2 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
-		};
-
-		fan3 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
-		};
-
-		fan4 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
-		};
-
-		fan5 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
-	};
-	iio-hwmon-12v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>;
-	};
-
-	iio-hwmon-5v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 1>;
-	};
-
-	iio-hwmon-3v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 2>;
-	};
-
-	iio-hwmon-vdd0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 3>;
-	};
-
-	iio-hwmon-vdd1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 4>;
-	};
-
-	iio-hwmon-vcs0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 5>;
-	};
-
-	iio-hwmon-vcs1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 6>;
-	};
-
-	iio-hwmon-vdn0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 7>;
-	};
-
-	iio-hwmon-vdn1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 8>;
-	};
-
-	iio-hwmon-vio0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 9>;
-	};
-
-	iio-hwmon-vio1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 10>;
-	};
-
-	iio-hwmon-vddra {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 11>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-
-	iio-hwmon-vddrb {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 13>;
-	};
-
-	iio-hwmon-vddrc {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 14>;
-	};
-
-	iio-hwmon-vddrd {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 15>;
-	};
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-		&pinctrl_pwm2_default &pinctrl_pwm3_default
-		&pinctrl_pwm4_default &pinctrl_pwm5_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@5 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-	fan@6 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-
-	fan@7 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
-	};
-
-	fan@8 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
-	};
-
-	fan@9 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
-	};
-
-	fan@10 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
-	};
-
-	fan@11 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x1F80000 >;
-				label = "obmc-ubi";
-			};
-		};
-	};
-	flash@1 {
-		status = "okay";
-		label = "alt-bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "alt-u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "alt-u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x1F80000 >;
-				label = "alt-obmc-ubi";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart2 {
-	/* APSS */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
-		 <&syscon ASPEED_CLK_MAC1RCLK>;
-	clock-names = "MACCLK", "RCLK";
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "disabled";
-};
-
-&i2c1 {
-	status = "disabled";
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* SAMTEC P0 */
-	/* SAMTEC P1 */
-
-};
-
-&i2c3 {
-	status = "okay";
-
-	/* APSS */
-	/* CPLD */
-
-	/* PCA9516 (repeater) ->
-	 *    CLK Buffer 9FGS9092
-	 *    CLK Buffer 9DBL0651BKILFT
-	 *    CLK Buffer 9DBL0651BKILFT
-	 *    Power Supply 0
-	 *    Power Supply 1
-	 *    PCA 9552 LED
-	 */
-
-	power-supply@58 {
-		compatible = "ibm,cffps1";
-		reg = <0x58>;
-	};
-
-	power-supply@5b {
-		compatible = "ibm,cffps1";
-		reg = <0x5b>;
-	};
-
-	pca9552: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-	};
-
-};
-
-&i2c4 {
-	status = "okay";
-
-	/* CP0 VDD & VCS : IR35221 */
-	/* CP0 VDN : IR35221 */
-	/* CP0 VIO : IR38064 */
-	/* CP0 VDDR : PXM1330 */
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-};
-
-&i2c5 {
-	status = "okay";
-
-	/* CP0 VDD & VCS : IR35221 */
-	/* CP0 VDN : IR35221 */
-	/* CP0 VIO : IR38064 */
-	/* CP0 VDDR : PXM1330 */
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-};
-
-&i2c6 {
-	status = "okay";
-
-	/* pca9548 -> NVMe1 to 8 */
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		bus7_mux223: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		bus7_mux224: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		bus7_mux225: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus7_mux226: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		bus7_mux227: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		bus7_mux228: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		bus7_mux229: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		bus7_mux230: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-
-};
-
-&i2c7 {
-	status = "okay";
-
-	/* pca9548 -> NVMe9 to 16 */
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		bus6_mux215: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		bus6_mux216: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		bus6_mux217: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus6_mux218: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		bus6_mux219: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		bus6_mux220: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		bus6_mux221: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		bus6_mux222: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-
-};
-
-&i2c8 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	/* pca9545 Riser ->
-	*	PCIe x8  Slot3
-	*	PCIe x16 slot4
-	*	PCIe x8  slot5
-	*	I2C BMC RISER PCA9554
-	*	BMC SCL/SDA PCA9554
-	*	PCA9554
-	*/
-
-	/* pca9545 ->
-	*	PCIe x16 Slot1
-	*	PCIe x8  slot2
-	*	PEX8748
-	*/
-
-	pca9545riser@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus9_mux231: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus0-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus0";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux232: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus1-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus1";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux233: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus9_mux234: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-
-	pca9545@71 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus9_mux235: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus2-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus2";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux236: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus3-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus3";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus9_mux237: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus9_mux238: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	/* pca9545 Riser ->
-	* 	PCIe x8  Slot8
-	* 	PCIe x16 slot9
-	* 	PCIe x8  slot10
-	* 	I2C BMC RISER PCA9554
-	* 	BMC SCL/SDA PCA9554
-	* 	PCA9554
-	*/
-
-	/* pca9545 ->
-	*	PCIe x16 Slot1
-	*	PCIe x8  slot2
-	*	PEX8748
-	*/
-
-	pca9545riser@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus10_mux239: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus4-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus4";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux240: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus5-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus5";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux241: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus10_mux242: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-
-	pca9545@71 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus10_mux243: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus6-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus6";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux244: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tca9554@39 {
-				compatible = "ti,tca9554";
-				reg = <0x39>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				smbus7-hog {
-					gpio-hog;
-					gpios = <4 GPIO_ACTIVE_HIGH>;
-					output-high;
-					line-name = "smbus7";
-				};
-			};
-
-			tmp431@4c {
-				compatible = "ti,tmp401";
-				reg = <0x4c>;
-			};
-		};
-
-		bus10_mux245: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus10_mux246: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	/* TPM */
-	/* RTC RX8900CE */
-	/* FPGA for power sequence */
-	/* TMP275A */
-	/* TMP275A */
-	/* EMC1462 */
-
-	tpm@57 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x57>;
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	/* chip emc1462 use emc1403 driver */
-	emc1403@4c {
-		compatible = "smsc,emc1403";
-		reg = <0x4c>;
-	};
-
-};
-
-&i2c12 {
-	status = "okay";
-
-	/* pca9545 ->
-	*	SAS BP1
-	*	SAS BP2
-	*	NVMe BP
-	*	M.2 riser
-	*/
-
-	pca9545@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		bus12_mux247: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		bus12_mux248: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		bus12_mux249: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		bus12_mux250: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			tmp275@48 {
-				compatible = "ti,tmp275";
-				reg = <0x48>;
-			};
-		};
-
-	};
-
-};
-
-&i2c13 {
-	status = "okay";
-
-	/* pca9548 ->
-	*	NVMe BP
-	*	NVMe HDD17 to 24
-	*/
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		bus13_mux251: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		bus13_mux252: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		bus13_mux253: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		bus13_mux254: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		bus13_mux255: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		bus13_mux256: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		bus13_mux257: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		bus13_mux258: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&adc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default
-			&pinctrl_adc1_default
-			&pinctrl_adc2_default
-			&pinctrl_adc3_default
-			&pinctrl_adc4_default
-			&pinctrl_adc5_default
-			&pinctrl_adc6_default
-			&pinctrl_adc7_default
-			&pinctrl_adc8_default
-			&pinctrl_adc9_default
-			&pinctrl_adc10_default
-			&pinctrl_adc11_default
-			&pinctrl_adc12_default
-			&pinctrl_adc13_default
-			&pinctrl_adc14_default
-			&pinctrl_adc15_default>;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	aspeed,alt-boot;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-#include "ibm-power9-dual.dtsi"
-
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
index 8503152faaf0..31ff19ef87a0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
@@ -11,7 +11,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -46,31 +46,31 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		air-water {
+		event-air-water {
 			label = "air-water";
 			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 6)>;
 		};
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(J, 2)>;
 		};
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(Z, 2)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(Z, 0)>;
 		};
 
-		id-button {
+		button-id {
 			label = "id-button";
 			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 1)>;
@@ -81,31 +81,31 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
 			linux,code = <9>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
 			linux,code = <10>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
 			linux,code = <11>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
 			linux,code = <12>;
 		};
 
-		fan4-presence {
+		event-fan4-presence {
 			label = "fan4-presence";
 			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
 			linux,code = <13>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
index 91dced7e7849..ac0d666ca10e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
@@ -10,7 +10,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -96,7 +96,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(J, 2)>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index eb4e93a57ff4..45631b47a7b3 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -10,7 +10,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@40000000 {
@@ -73,7 +73,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(P, 5)>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index fd2e014dae75..893e621ecab1 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -9,7 +9,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -87,7 +87,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(J, 2)>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
index d56b5ed09b37..bbf864f84d37 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
@@ -10,7 +10,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -38,37 +38,37 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		air-water {
+		event-air-water {
 			label = "air-water";
 			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(B, 5)>;
 		};
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(J, 2)>;
 		};
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(R, 7)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(N, 0)>;
 		};
 
-		oppanel-presence {
+		event-oppanel-presence {
 			label = "oppanel-presence";
 			gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(A, 7)>;
 		};
 
-		opencapi-riser-presence {
+		event-opencapi-riser-presence {
 			label = "opencapi-riser-presence";
 			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(I, 0)>;
@@ -84,55 +84,55 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <1000>;
 
-		scm0-presence {
+		event-scm0-presence {
 			label = "scm0-presence";
 			gpios = <&pca9552 6 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		scm1-presence {
+		event-scm1-presence {
 			label = "scm1-presence";
 			gpios = <&pca9552 7 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
 		};
 
-		cpu0vrm-presence {
+		event-cpu0vrm-presence {
 			label = "cpu0vrm-presence";
 			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
 			linux,code = <12>;
 		};
 
-		cpu1vrm-presence {
+		event-cpu1vrm-presence {
 			label = "cpu1vrm-presence";
 			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
 			linux,code = <13>;
 		};
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
 			linux,code = <5>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
 			linux,code = <8>;
 		};
 
-		fanboost-presence {
+		event-fanboost-presence {
 			label = "fanboost-presence";
 			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
 			linux,code = <9>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index c1478d2db602..3f6010ef2b86 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -13,7 +13,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200n8";
+		bootargs = "console=ttyS4,115200n8 earlycon";
 	};
 
 	memory@80000000 {
@@ -50,13 +50,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(H, 3)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(E, 5)>;
@@ -65,29 +65,27 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
 			linux,code = <4>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
 			linux,code = <5>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
@@ -126,7 +124,7 @@
 	/*M0-M7*/	"","","","","","","","",
 	/*N0-N7*/	"","","","","","","","",
 	/*O0-O7*/	"led-rear-power","led-rear-id","","usb-power","","","","",
-	/*P0-P7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","bmc-tpm-reset","","",
 	/*Q0-Q7*/	"cfam-reset","","","","","","","fsi-routing",
 	/*R0-R7*/	"","","","","","","","",
 	/*S0-S7*/	"","","","","","","","",
@@ -136,10 +134,7 @@
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
+	/*Z0-Z7*/	"","","","","","","","";
 };
 
 &fmc {
@@ -189,6 +184,7 @@
 
 &emmc {
 	status = "okay";
+	clk-phase-mmc-hs200 = <36>, <270>;
 };
 
 &fsim0 {
@@ -199,7 +195,6 @@
 
 	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
 	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
-	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 
 	cfam@0,0 {
 		reg = <0 0>;
@@ -879,3 +874,14 @@
 	status = "okay";
 	memory-region = <&vga_memory>;
 };
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
index 01074b6e3e03..8a7fb55ab489 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
@@ -11,7 +11,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@40000000 {
@@ -63,13 +63,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		button_checkstop {
+		event-checkstop {
 			label = "checkstop";
 			linux,code = <74>;
 			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
 		};
 
-		button_identify {
+		event-identify {
 			label = "identify";
 			linux,code = <152>;
 			gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
index 85d58a63ae90..a20a532fc280 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -10,7 +10,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -51,25 +51,25 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		air-water {
+		event-air-water {
 			label = "air-water";
 			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(B, 5)>;
 		};
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(J, 2)>;
 		};
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(P, 7)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(N, 0)>;
@@ -85,25 +85,25 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
 			linux,code = <4>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
 			linux,code = <5>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
index 4bcc82046362..0cb7b20ff3ab 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -17,7 +17,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -58,13 +58,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 7)>;
 		};
 
-		pcie-e2b-present{
+		event-pcie-e2b-present{
 			label = "pcie-e2b-present";
 			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(E, 7)>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
index 03c161493ffc..a5e64ccc2b3a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
@@ -14,7 +14,7 @@
 	};
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -24,17 +24,17 @@
 	leds {
 		compatible = "gpio-leds";
 		postcode0 {
-			label="BMC_UP";
+			label = "BMC_UP";
 			gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 		postcode1 {
-			label="BMC_HB";
+			label = "BMC_HB";
 			gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 		postcode2 {
-			label="FAULT";
+			label = "FAULT";
 			gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 		};
 		// postcode3-7 are GPIOH3-H7
diff --git a/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts b/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts
new file mode 100644
index 000000000000..259ef3f54c5c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "Qualcomm DC-SCM V1 BMC";
+	compatible = "qcom,dc-scm-v1-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	/* Bootloader sets up the MAC to insert delay */
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+
+	use-ncsi;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <133000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BMC_FLASH_MUX_SEL","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"BMC_FWSPI_RST_N","","GPIO_1_BMC_3V3","","","","","",
+	/*O0-O7*/	"JTAG_MUX_A","JTAG_MUX_B","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","SCMFPGA_SPARE_GPIO1_3V3",
+			"SCMFPGA_SPARE_GPIO2_3V3","SCMFPGA_SPARE_GPIO3_3V3",
+			"SCMFPGA_SPARE_GPIO4_3V3","SCMFPGA_SPARE_GPIO5_3V3",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*A0-A7*/	"GPI_1_BMC_1V8","","","","","",
+			"SCMFPGA_SPARE_GPIO1_1V8","SCMFPGA_SPARE_GPIO2_1V8",
+	/*B0-B7*/	"SCMFPGA_SPARE_GPIO3_1V8","SCMFPGA_SPARE_GPIO4_1V8",
+			"SCMFPGA_SPARE_GPIO5_1V8","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","BMC_SPI1_RST_N","BIOS_FLASH_MUX_SEL","",
+			"","TPM2_PIRQ_N","TPM2_RST_N","",
+	/*E0-E7*/	"","","","","","","","";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
index a68ff0675c28..9605e53f5bbf 100644
--- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
@@ -28,7 +28,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@40000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts
new file mode 100644
index 000000000000..46cbba6305b8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Quanta Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Quanta S6Q BMC";
+	compatible = "quanta,s6q-bmc", "aspeed,ast2600";
+
+	aliases {
+		// bus 0
+		i2c20 = &SMB_HOST_DB2000_3V3AUX_SCL;
+		i2c21 = &U12_PCA9546_CH1;
+		i2c22 = &SMB_HOST_DB800_B_SCL;
+		i2c23 = &SMB_HOST_DB800_C_SCL;
+
+		// bus 1
+		i2c24 = &SMB_M2_P0_1V8AUX_SCL;
+		i2c25 = &SMB_M2_P1_1V8AUX_SCL;
+		i2c26 = &SMB_CPU_PIROM_3V3AUX_SCL;
+		i2c27 = &SMB_TEMP_3V3AUX_SCL;
+		i2c28 = &SMB_IPMB_3V3AUX_SSDSB_SCL;
+		i2c29 = &SMB_IPMB_3V3AUX_SCL;
+		i2c31 = &SMB_FB_SCL;
+
+		// bus 1 - Fan board
+		i2c32 = &SMB_IOEXP_SCL;
+		i2c33 = &SMB_PROGRAM_SCL;
+		i2c34 = &SMB_FB_SCL_CH2;
+		i2c35 = &SMB_FAN_SENSE_SCL;
+
+		// bus 6
+		i2c36 = &U197_PCA9546_CH0;
+		i2c37 = &U197_PCA9546_CH1;
+		i2c38 = &U197_PCA9546_CH2;
+		i2c39 = &U197_PCA9546_CH3;
+
+		//bus 7
+		i2c40 = &SMB_OCP_SFF_3V3AUX_SCL; //OCP1
+		i2c41 = &SMB_OCP_LFF_3V3AUX_SCL; //OCP2
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		BMC_HEARTBEAT_N {
+			label = "BMC_HEARTBEAT_N";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		BMC_LED_STATUS_AMBER_N {
+			label = "BMC_LED_STATUS_AMBER_N";
+			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		FM_ID_LED_N {
+			label = "FM_ID_LED_N";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 - A7*/	"", "", "", "", "", "", "", "",
+	/*B0 - B7*/	"", "", "", "", "", "", "", "",
+	/*C0 - C7*/	"", "", "", "", "", "", "", "",
+	/*D0 - D7*/	"", "", "", "", "", "", "", "",
+	/*E0 - E7*/	"", "", "", "", "", "", "", "",
+	/*F0 - F7*/	"PLTRST_N", "", "PWR_DEBUG_N", "", "", "", "", "",
+	/*G0 - G7*/	"", "", "", "", "", "", "", "",
+	/*H0 - H7*/	"", "", "", "", "", "", "", "",
+	/*I0 - I7*/	"", "", "", "", "", "", "", "",
+	/*J0 - J7*/	"", "", "", "", "", "", "", "",
+	/*K0 - K7*/	"", "", "", "", "", "", "", "",
+	/*L0 - L7*/	"", "", "", "", "PREQ_N", "TCK_MUX_SEL", "", "",
+	/*M0 - M7*/	"", "", "", "PWRGD_SYS_PWROK", "", "PRDY_N", "", "",
+	/*N0 - N7*/	"", "", "", "", "", "", "", "",
+	/*O0 - O7*/	"", "", "", "", "", "", "", "",
+	/*P0 - P7*/	"SYS_BMC_PWRBTN_R_N", "SYS_PWRBTN_N", "FM_MB_RST_BTN", "RST_BMC_RSTBTN_OUT_N", "", "", "", "",
+	/*Q0 - Q7*/	"", "", "", "", "", "", "", "",
+	/*R0 - R7*/	"", "", "", "", "", "", "", "",
+	/*S0 - S7*/	"", "", "", "FP_ID_BTN_SCM_N", "", "", "", "",
+	/*T0 - T7*/	"", "", "", "", "", "", "", "",
+	/*U0 - U7*/	"", "", "", "", "", "", "", "",
+	/*V0 - V7*/	"", "", "", "", "", "SMI", "", "",
+	/*W0 - W7*/	"", "", "", "", "", "", "", "",
+	/*X0 - X7*/	"", "", "", "", "", "", "", "",
+	/*Y0 - Y7*/	"", "", "", "", "", "", "", "",
+	/*Z0 - Z7*/	"FM_BMC_READY_N", "", "", "", "", "", "", "",
+	/*AA0 - AA7*/	"", "", "", "", "", "", "", "",
+	/*AB0 - AB7*/	"", "", "", "", "", "", "", "",
+	/*AC0 - AC7*/	"", "", "", "", "", "", "", "";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <48000>;
+	gpio-line-names =
+	/* SGPIO input lines */
+	/*IOA0-IOA7*/	"","", "SIO_POWER_GOOD","OA1", "XDP_PRST_N","", "","", "FM_SLPS3_PLD_N","", "FM_SLPS4_PLD_N","", "FM_BIOS_POST_CMPLT_BMC_N","", "FM_ADR_TRIGGER_N","OA7",
+	/*IOB0-IOB7*/	"FM_ADR_COMPLETE","", "FM_PMBUS_ALERT_B_EN","", "PSU0_PRESENT_N","", "PSU1_PRESENT_N","", "PSU0_VIN_BUF_GOOD","", "PSU01_VIN_BUF_GOOD","", "PWRGD_PS0_PWROK_R","", "PWRGD_PS1_PWROK_R","",
+	/*IOC0-IOC7*/	"PWRGD_PS_PWROK_PLD_R","", "CHASSIS_INTRUSION","", "BMC_MFG_MODE","", "FM_BMC_EN_DET_R","", "FM_ME_BT_DONE","", "CPU1_PRESENCE","", "CPU2_PRESENCE","", "IRQ_PSYS_CRIT_N","",
+	/*IOD0-IOD7*/	"","", "CPU1_THERMTRIP","", "CPU2_THERMTRIP","", "CPU1_MEM_THERM_EVENT","", "CPU2_MEM_THERM_EVENT","", "CPU1_VRHOT","", "CPU2_VRHOT","", "","",
+	/*IOE0-IOE7*/	"","", "CPU1_MEM_VRHOT","", "CPU2_MEM_VRHOT","", "","", "PCH_BMC_THERMTRIP","", "","", "","", "","",
+	/*IOF0-IOF7*/	"CPU_ERR0","", "CPU_ERR1","", "CPU_ERR2","", "","", "","", "CPU_CATERR","", "","", "","",
+	/*IOG0-IOG7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOH0-IOH7*/	"","", "FP_ID_BTN_R1_N","", "FP_RST_BTN_N","", "","", "","", "FP_PWR_BTN_PLD_N_R","", "","", "","",
+	/*IOI0-IOI7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOJ0-IOJ7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOK0-IOK7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOL0-IOL7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOM0-IOM7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*ION0-ION7*/	"","BMC_SW_HEARTBEAT_N_R", "","FP_LED_FAULT_N", "","FP_ID_LED_N", "","FM_BMC_RSTBTN_OUT_N", "","FM_THERMTRIP_DLY_LVC1_R_N", "","", "","RST_PCA9548_SENSOR_PLD_N", "","USB_OC1_REAR_N",
+	/*IOO0-IOO7*/	"","IRQ_TPM_SPI_N", "","", "","IRQ_PCH_SCI_WHEA_R_N", "","IRQ_BMC_PCH_NMI_R", "","H_CPU_NMI_LVC1_R_N", "","", "","", "","FM_JTAG_BMC_PLD_MUX_SEL",
+	/*IOP0-IOP7*/	"IP0","OP0", "","", "","", "","", "","", "","", "","", "IP7","OP7";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rmii";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
+		&pinctrl_spi2cs2_default>;
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi2:0";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA0>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA2>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <100000000>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	U34_PWR_ADC@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+
+	U35_PWR_ADC@4b {
+		compatible = "ti,ads7830";
+		reg = <0x4b>;
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		SMB_HOST_DB2000_3V3AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		U12_PCA9546_CH1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		SMB_HOST_DB800_B_SCL: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		SMB_HOST_DB800_C_SCL: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	i2c-switch@59 {
+		compatible = "nxp,pca9848";
+		reg = <0x59>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		SMB_M2_P0_1V8AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		SMB_M2_P1_1V8AUX_SCL: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		SMB_CPU_PIROM_3V3AUX_SCL: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		SMB_TEMP_3V3AUX_SCL: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			U163_tmp75@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			U114_tmp75@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		SMB_IPMB_3V3AUX_SSDSB_SCL: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			U4_tmp75@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+			U73_tmp75@4d {
+				compatible = "ti,tmp75";
+				reg = <0x4d>;
+			};
+		};
+
+		SMB_IPMB_3V3AUX_SCL: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			U190_fru@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+				pagesize = <32>;
+			};
+		};
+
+		SMB_FB_SCL: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-switch@77 {
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				SMB_IOEXP_SCL: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				SMB_PROGRAM_SCL: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				SMB_FB_SCL_CH2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				SMB_FAN_SENSE_SCL: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					Current_Meter_U2@45 {
+						compatible = "ti,ina219";
+						reg = <0x45>;
+						shunt-resistor = <1000>; /* = 1 mOhm */
+					};
+
+					Current_Meter_U3@44 {
+						compatible = "ti,ina219";
+						reg = <0x44>;
+						shunt-resistor = <1000>; /* = 1 mOhm */
+					};
+
+					TEMP_sensor_U2@4b {
+						compatible = "ti,tmp75";
+						reg = <0x4b>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* MB FRU (U173) @ 0xA2 */
+	mb_fru: mb_fru@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	/* FP_U1 Inlet */
+	FP_U1_tmp75@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+
+	FP_U4_fru@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		U197_PCA9546_CH0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		U197_PCA9546_CH1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			cpu0_pvccin@60 {
+				compatible = "isil,raa229004";
+				reg = <0x60>;
+			};
+
+			cpu0_pvccinfaon@61 {
+				compatible = "isil,isl69260";
+				reg = <0x61>;
+			};
+
+			cpu0_pvccd_hv@63 {
+				compatible = "isil,isl69260";
+				reg = <0x63>;
+			};
+		};
+
+		U197_PCA9546_CH2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			cpu1_pvccin@72 {
+				compatible = "isil,raa229004";
+				reg = <0x72>;
+			};
+
+			cpu1_pvccinfaon@74 {
+				compatible = "isil,isl69260";
+				reg = <0x74>;
+			};
+
+			cpu1_pvccd_hv@76 {
+				compatible = "isil,isl69260";
+				reg = <0x76>;
+			};
+		};
+
+		U197_PCA9546_CH3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-switch@75 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		SMB_OCP_SFF_3V3AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		SMB_OCP_LFF_3V3AUX_SCL: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+
+	/* SCM FRU (U19) @ 0xA2 */
+	scm_fru: scm_fru@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	scm_tmp75_u4@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts b/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts
index bc16ad2b5c80..50f3c6a5c0c8 100644
--- a/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts
@@ -11,7 +11,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "earlyprintk";
+		bootargs = "earlycon";
 	};
 
 	memory@80000000 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
new file mode 100644
index 000000000000..aff27c1d4b06
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
@@ -0,0 +1,528 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Tyan S7106 BMC";
+	compatible = "tyan,s7106-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		p2a_memory: region@987f0000 {
+			no-map;
+			reg = <0x987f0000 0x00010000>; /* 64KB */
+		};
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>; /* 16M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		label = "bmc";
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* RS-232 connector on header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* Alternative to vuart to internally connect (route) to uart1
+	 * when vuart cannot be used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart4 {
+	/* Alternative to vuart to internally connect (route) to the
+	 * external port usually used by uart1 when vuart cannot be
+	 * used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart5 {
+	/* BMC "debug" (console) UART; connected to RS-232 connector
+	 * on header; selectable via jumpers as alternative to uart2
+	 */
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+
+	/* We enable the VUART here, but leave it in a state that does
+	 * not interfere with the SuperIO. The goal is to have both the
+	 * VUART and the SuperIO available and decide at runtime whether
+	 * the VUART should actually be used. For that reason, configure
+	 * an "invalid" IO address and an IRQ that is not used by the
+	 * BMC.
+	 */
+
+	aspeed,lpc-io-reg = <0xffff>;
+	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&p2a_memory>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default>;
+
+	/* CPU fan #0 */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* CPU fan #1 */
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	/* PWM group for chassis fans #1, #2, #3 and #4  */
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	/* PWM group for chassis fans #5 and #6  */
+	fan@6 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* Hardware monitor with temperature sensors */
+	nct7802@28 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x28>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 { /* LTD */
+			reg = <0>;
+		};
+
+		channel@1 { /* RTD1 */
+			reg = <1>;
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@2 { /* RTD2 */
+			reg = <2>;
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@3 { /* RTD3 */
+			reg = <3>;
+			sensor-type = "temperature";
+		};
+	};
+
+	/* Also connected to:
+	 * - IPMB pin header
+	 * - CPU #0 memory error LED @ 0x3A
+	 * - CPU #1 memory error LED @ 0x3C
+	 */
+};
+
+&i2c1 {
+	/* Directly connected to PCH SMBUS #0 */
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* BMC EEPROM, incl. mainboard FRU */
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	/* Also connected to:
+	 * - fan header
+	 * - mini-SAS HD connector
+	 * - SSATA SGPIO
+	 * - via switch (BMC_SMB3_PCH_IE_SML3_EN, active low)
+	 *   to PCH SMBUS #3
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* PSU1 FRU @ 0xA0 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* PSU2 FRU @ 0xA2 */
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	/* PSU1 @ 0xB0 */
+	power-supply@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	/* PSU2 @ 0xB2 */
+	power-supply@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+
+	/* Also connected to:
+	 * - PCH SMBUS #1
+	 */
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #2
+	 */
+
+	/* Connected via switch to:
+	 * - CPU #0 channels ABC VDDQ @ 0x80
+	 * - CPU #0 channels DEF VDDQ @ 0x81
+	 * - CPU #1 channels ABC VDDQ @ 0x82
+	 * - CPU #1 channels DEF VDDQ @ 0x83
+	 * - CPU #0 VCCIO & VMCP @ 0x52
+	 * - CPU #1 VCCIO & VMCP @ 0x53
+	 * - CPU #0 VCCIN @ 0xC0
+	 * - CPU #0 VSA @ 0xC2
+	 * - CPU #1 VCCIN @ 0xC4
+	 * - CPU #1 VSA @ 0xC6
+	 * - J110
+	 */
+};
+
+&i2c5 {
+	status = "okay";
+
+	/* Connected via switch (PCH_BMC_SMB_SW_P) to:
+	 * - mainboard FRU @ 0xAE
+	 * - XDP connector
+	 * - ME debug header
+	 * - clock buffer @ 0xD8
+	 * - i2c4 via switch (PCH_VR_SMBUS_SW_P; controlled by PCH)
+	 * - PCH SMBUS
+	 */
+};
+
+&i2c6 {
+	status = "okay";
+
+	/* Connected via switch (BMC_PE_SMB_EN_1_N) to
+	 * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
+	 * - 0,0: PCIE slot 1, SMB #1
+	 * - 0,1: PCIE slot 1, SMB #2
+	 * - 1,0: PCIE slot 2, SMB #1
+	 * - 1,1: PCIE slot 2, SMB #2
+	 */
+
+	/* Connected via switch (BMC_PE_SMB_EN_2_N) to
+	 * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
+	 * - 0,0: OCP0 (A) SMB
+	 * - 0,1: OCP0 (C) SMB
+	 * - 1,0: OCP1 (A) SMB
+	 * - 1,1: NC
+	 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #4
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* Not connected */
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+/* We're following the GPIO naming as defined at
+ * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
+ *
+ * Notes on led-identify and id-button:
+ * - A physical button is connected to id-button which
+ *   triggers the clock on a D flip-flop. The /Q output of the
+ *   flip-flop drives its D input.
+ * - The flip-flop's Q output drives led-identify which is
+ *   connected to LEDs.
+ * - With that, every button press toggles the LED between on and off.
+ *
+ * Notes on power-, reset- and nmi- button and control:
+ * - The -button signals can be used to monitor physical buttons.
+ * - The -control signals can be used to actuate the specific
+ *   operation.
+ * - In hardware, the -button signals are connected to the -control
+ *   signals through drivers with the -control signals being
+ *   protected through diodes.
+ */
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0*/		"",
+	/*A1*/		"",
+	/*A2*/		"led-identify", /* in/out: BMC_IDLED_ON_N */
+	/*A3*/		"",
+	/*A4*/		"",
+	/*A5*/		"",
+	/*A6*/		"",
+	/*A7*/		"",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0*/		"",
+	/*C1*/		"",
+	/*C2*/		"",
+	/*C3*/		"",
+	/*C4*/		"id-button", /* in/out: BMC_IDBTN_IN_OUT_N */
+	/*C5*/		"post-complete", /* in: FM_BIOS_POST_CMPLT_N */
+	/*C6*/		"",
+	/*C7*/		"",
+	/*D0*/		"",
+	/*D1*/		"",
+	/*D2*/		"power-chassis-good", /* in: SYS_PWROK_BUF */
+	/*D3*/		"platform-reset", /* in: SYS_PLTRST_N */
+	/*D4*/		"",
+	/*D5*/		"",
+	/*D6*/		"",
+	/*D7*/		"",
+	/*E0*/		"power-button", /* in: BMC_PWBTN_IN_N */
+	/*E1*/		"power-chassis-control", /* out: BMC_PWRBTN_OUT_N */
+	/*E2*/		"reset-button", /* in: BMC_RSTBTN_IN_N */
+	/*E3*/		"reset-control", /* out: BMC_RSTBTN_OUT_N */
+	/*E4*/		"nmi-button", /* in: BMC_NMIBTN_IN_N */
+	/*E5*/		"nmi-control", /* out: BMC_NMIBTN_OUT_N */
+	/*E6*/		"",
+	/*E7*/		"led-heartbeat", /* out: BMC_HEARTBRAT_LED_N */
+	/*F0*/		"",
+	/*F1*/		"clear-cmos-control", /* out: BMC_CLR_CMOS_N */
+	/*F2*/		"",
+	/*F3*/		"",
+	/*F4*/		"led-fault", /* out: AST_HW_FAULT_N */
+	/*F5*/		"",
+	/*F6*/		"",
+	/*F7*/		"",
+	/*G0*/		"BMC_PE_SMB_EN_1_N", /* out */
+	/*G1*/		"BMC_PE_SMB_EN_2_N", /* out */
+	/*G2*/		"",
+	/*G3*/		"",
+	/*G4*/		"",
+	/*G5*/		"",
+	/*G6*/		"",
+	/*G7*/		"",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0*/		"",
+	/*Q1*/		"",
+	/*Q2*/		"",
+	/*Q3*/		"",
+	/*Q4*/		"BMC_PE_SMB_SW_BIT0", /* out */
+	/*Q5*/		"BMC_PE_SMB_SW_BIT1", /* out */
+	/*Q6*/		"",
+	/*Q7*/		"",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0*/		"",
+	/*AA1*/		"",
+	/*AA2*/		"",
+	/*AA3*/		"BMC_SMB3_PCH_IE_SML3_EN", /* out */
+	/*AA4*/		"",
+	/*AA5*/		"",
+	/*AA6*/		"",
+	/*AA7*/		"",
+	/*AB0-AB7*/	"","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s8036.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s8036.dts
new file mode 100644
index 000000000000..f6c4549c0ac4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s8036.dts
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Tyan S8036 BMC";
+	compatible = "tyan,s8036-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		p2a_memory: region@987f0000 {
+			no-map;
+			reg = <0x987f0000 0x00010000>; /* 64KB */
+		};
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>; /* 16M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		label = "bmc";
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* RS-232 connector on header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* Alternative to vuart to internally connect (route) to uart1
+	 * when vuart cannot be used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart4 {
+	/* Alternative to vuart to internally connect (route) to the
+	 * external port usually used by uart1 when vuart cannot be
+	 * used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart5 {
+	/* BMC "debug" (console) UART; connected to RS-232 connector
+	 * on header; selectable via jumpers as alternative to uart2
+	 */
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+
+	/* We enable the VUART here, but leave it in a state that does
+	 * not interfere with the SuperIO. The goal is to have both the
+	 * VUART and the SuperIO available and decide at runtime whether
+	 * the VUART should actually be used. For that reason, configure
+	 * an "invalid" IO address and an IRQ that is not used by the
+	 * BMC.
+	 */
+	aspeed,lpc-io-reg = <0xffff>;
+	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&p2a_memory>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default>;
+
+	/* CPU fan */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* PWM group for chassis fans #1, #2, #3 and #4 */
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	/* PWM group for chassis fans #5 and #6  */
+	fan@6 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c0 {
+	/* Directly connected to Sideband-Temperature Sensor Interface (APML) */
+	status = "okay";
+};
+
+&i2c1 {
+	/* Directly connected to IPMB HDR. */
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* BMC EEPROM, incl. mainboard FRU */
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+	/* Also connected to:
+	 * - BCM5720
+	 * - FPGA
+	 * - FAN HDR
+	 * - FPIO HDR
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* PSU1 FRU @ 0xA0 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* PSU2 FRU @ 0xA2 */
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	/* PSU1 @ 0xB0 */
+	power-supply@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	/* PSU2 @ 0xB2 */
+	power-supply@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	/* Hardware monitor with temperature sensors */
+	nct7802@28 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x28>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 { /* LTD */
+			reg = <0>;
+			status = "okay";
+		};
+
+		channel@1 { /* RTD1 */
+			reg = <1>;
+			status = "okay";
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@2 { /* RTD2 */
+			reg = <2>;
+			status = "okay";
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@3 { /* RTD3 */
+			reg = <3>;
+			status = "okay";
+			sensor-type = "temperature";
+		};
+	};
+
+	/* Also connected to:
+	 * - PCA9544
+	 * - CLK BUFF
+	 * - OCP FRU
+	 */
+};
+
+&i2c6 {
+	status = "okay";
+	/* Connected to:
+	 * - PCA9548 @0xE0
+	 * - PCA9548 @0xE2
+	 * - PCA9544 @0xE4
+	 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #4
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* Not connected */
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+/* We're following the GPIO naming as defined at
+ * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
+ *
+ * Notes on led-identify and id-button:
+ * - A physical button is connected to id-button which
+ *   triggers the clock on a D flip-flop. The /Q output of the
+ *   flip-flop drives its D input.
+ * - The flip-flop's Q output drives led-identify which is
+ *   connected to LEDs.
+ * - With that, every button press toggles the LED between on and off.
+ *
+ * Notes on power-, reset- and nmi- button and control:
+ * - The -button signals can be used to monitor physical buttons.
+ * - The -control signals can be used to actuate the specific
+ *   operation.
+ * - In hardware, the -button signals are connected to the -control
+ *   signals through drivers with the -control signals being
+ *   protected through diodes.
+ */
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0*/		"",
+	/*A1*/		"",
+	/*A2*/		"led-identify", /* in/out: BMC_CHASSIS_ID_LED_L */
+	/*A3*/		"",
+	/*A4*/		"",
+	/*A5*/		"",
+	/*A6*/		"",
+	/*A7*/		"",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0*/		"",
+	/*D1*/		"",
+	/*D2*/		"power-chassis-good", /* in: PWR_GOOD_LED -- Check if this is Z3?*/
+	/*D3*/		"platform-reset", /* in: RESET_LED_L */
+	/*D4*/		"",
+	/*D5*/		"",
+	/*D6*/		"",
+	/*D7*/		"",
+	/*E0*/		"power-button", /* in: BMC_SYS_MON_PWR_BTN_L */
+	/*E1*/		"power-chassis-control", /* out: BMC_ASSERT_PWR_BTN */
+	/*E2*/		"reset-button", /* in: BMC_SYS_MOS_RST_BTN_L*/
+	/*E3*/		"reset-control", /* out: BMC_ASSERT_RST_BTN */
+	/*E4*/		"nmi-button", /* in: BMC_SYS_MON_NMI_BTN_L */
+	/*E5*/		"nmi-control", /* out: BMC_ASSERT_NMI_BTN */
+	/*E6*/		"TSI_RESERT",
+	/*E7*/		"led-heartbeat", /* out: BMC_GPIOE7 */
+	/*F0*/		"",
+	/*F1*/		"clear-cmos-control", /* out: BMC_ASSERT_CLR_CMOS_L */
+	/*F2*/		"",
+	/*F3*/		"",
+	/*F4*/		"led-fault", /* out: BMC_HWM_FAULT_LED_L */
+	/*F5*/		"BMC_SYS_FAULT_LED_L",
+	/*F6*/		"BMC_ASSERT_BIOS_WP_L",
+	/*F7*/		"",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0*/		"",
+	/*Q1*/		"",
+	/*Q2*/		"",
+	/*Q3*/		"",
+	/*Q4*/		"",
+	/*Q5*/		"",
+	/*Q6*/		"id-button", /* in: BMC_CHASSIS_ID_BTN_L */
+	/*Q7*/		"",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z2*/	"","","",
+	/*Z3*/		"post-complete", /* BMC_SYS_MON_PWROK */
+	/*Z4-Z7*/	"","","","",
+	/*AA0*/		"",
+	/*AA1*/		"",
+	/*AA2*/		"",
+	/*AA3*/		"",
+	/*AA4*/		"",
+	/*AA5*/		"",
+	/*AA6*/		"",
+	/*AA7*/		"BMC_ASSERT_BMC_READY",
+	/*AB0*/		"BMC_SPD_SEL",
+	/*AB1-AB7*/	"","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
new file mode 100644
index 000000000000..7ab29129d1e4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2022 Ufispace Co., Ltd.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ufispace NCPLite BMC";
+	compatible = "ufispace,ncplite-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		fan-status-int-l {
+			label = "fan-status-int-l";
+			gpios = <&gpio0 ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(M, 2)>;
+		};
+
+		allpwr-good {
+			label = "allpwr-good";
+			gpios = <&gpio0 ASPEED_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(V, 4)>;
+		};
+
+		psu0-alert-n {
+			label = "psu0-alert-n";
+			gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 1)>;
+		};
+
+		psu1-alert-n {
+			label = "psu1-alert-n";
+			gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 2)>;
+		};
+
+		int-thermal-alert {
+			label = "int-thermal-alert";
+			gpios = <&gpio0 ASPEED_GPIO(P, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 2)>;
+		};
+
+		cpu-caterr-l {
+			label = "cpu-caterr-l";
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 3)>;
+		};
+
+		cpu-thermtrip-l {
+			label = "cpu-thermtrip-l";
+			gpios = <&gpio0 ASPEED_GPIO(V, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 5)>;
+		};
+
+		psu0-presence-l {
+			label = "psu0-presence-l";
+			gpios = <&gpio0 ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 6)>;
+		};
+
+		psu1-presence-l {
+			label = "psu1-presence-l";
+			gpios = <&gpio0 ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 7)>;
+		};
+
+		psu0-power-ok {
+			label = "psu0-power-ok";
+			gpios = <&gpio0 ASPEED_GPIO(M, 4) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(M, 4)>;
+		};
+
+		psu1-power-ok {
+			label = "psu1-power-ok";
+			gpios = <&gpio0 ASPEED_GPIO(M, 5) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(M, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&fan_ioexp 2 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&fan_ioexp 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&fan_ioexp 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&fan_ioexp 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+	};
+};
+
+&mac2 {
+	status = "okay";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_reset {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&udc {
+	status = "okay";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	lm75@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	lm86@4c {
+		compatible = "national,lm86";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	lm75@4f {
+		cpmpatible = "national,lm75";
+		reg = <0x4f>;
+	};
+
+	fan_ioexp: pca9535@20 {
+		compatible = "nxp,pca9535";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"","","presence-fan0","",
+		"","","presence-fan1","",
+		"","","presence-fan2","",
+		"","","presence-fan3","";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <1>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <1>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"CPU_PWRGD","","","power-button","host0-ready","","presence-ps0","presence-ps1",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","reset-button","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"power-chassis-control0","power-chassis-control1","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","power-chassis-good","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman-n110.dts b/arch/arm/boot/dts/aspeed-bmc-vegman-n110.dts
new file mode 100644
index 000000000000..24319267d550
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-vegman-n110.dts
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN N110 BMC";
+	compatible = "yadro,vegman-n110-bmc", "aspeed,ast2500";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
+	/*F0-F7*/	"NMI_OUT","PCIE_NIC_ALERT","","","SKT0_FAULT_LED","","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","_SPI2_BMC_CS_SEL",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_RMM4_LITE_CS","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"", "", "", "", "", "", "PE_PCH_SCR_CLKREQ", "",
+		/*IO1.0-1.7*/	"", "PE_PCH_MEZ_PRSNT", "PE_PCH_MEZ_PRSNT_", "NIC_4_PE_PRSNT", "NIC_3_PE_PRSNT", "NIC_2_PE_PRSNT", "NIC_1_PE_PRSNT", "";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "", "", "",
+		/*IO3.0-3.7*/	"", "", "", "", "", "", "", "",
+		/*IO4.0-4.7*/	"", "", "", "", "", "", "", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	mux-expa@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+	mux-sata@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	mux-expb@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x06>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman-rx20.dts b/arch/arm/boot/dts/aspeed-bmc-vegman-rx20.dts
new file mode 100644
index 000000000000..ebbb68b55559
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-vegman-rx20.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN Rx20 BMC";
+	compatible = "yadro,vegman-rx20-bmc", "aspeed,ast2500";
+
+	leds {
+		compatible = "gpio-leds";
+
+		temp_alarm {
+			label = "temp:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		temp_ok {
+			label = "temp:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		psu_fault {
+			label = "psu:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		psu_ok {
+			label = "psu:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CASE_OPEN_DNP","CASE_OPEN_FAULT_RST_DNP","BEZEL_ON_PWR_P3V3","PWM_PWRGD_EXP_EN","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","LED_TEMP_STATUS_R","LED_TEMP_STATUS_G","LED_PWR_STATUS_R","LED_PWR_STATUS_G",
+	/*F0-F7*/	"NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED_DNP","SKT1_FAULT_LED_DNP","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","SPI_BMC_BOOT_HD","IRQ_NMI_EVENT","SPI_BMC_BOOT_WP","SPI_BMC_BOOT_WP1","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"SEL_FLASH_SOFT","STATUS_SEL_BMC","","","BMC_WDT_P","ID_BUTTON","PS_PWROK","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","SPI_BIOS_ACTIVE_FLASH_SEL","STATUS_SEL_BIOS",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_BMC_BOOT_CS1","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","RSR_A_SMBEXP_RST_INT","RSR_B_SMBEXP_RST_INT","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","BMC_WDT_RST1","BMC_WDT_RST2","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"ETH3_CLK_REQ", "ETH2_CLK_REQ", "RSR_A_PCIE_X16_2_PRSNT", "RSR_B_PCIE_X16_2_PRSNT", "", "RSR_B_PCIE_X8_3_PRSNT", "RSR_B_PCIE_X8_4_PRSNT", "RSR_B_PCIE_X16_PRSNT_N",
+		/*IO1.0-1.7*/	"RSR_B_PCIE_X8_2_PRSNT", "RSR_B_PCIE_X8_1_PRSNT", "NIC_1_PE_BUF_PRSNT", "RSR_A_PCIE_X16_PRSNT", "RSR_A_PCIE_X8_3_PRSNT", "RSR_A_PCIE_X8_2_PRSNT", "RSR_A_PCIE_X8_1_PRSNT_N", "";
+	};
+	gpio@23 {
+		compatible = "nxp,pcal9535";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "", "", "",
+		/*IO1.0-1.7*/	"", "", "", "", "", "", "", "";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1",
+		/*IO3.0-3.7*/	"PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1",
+		/*IO4.0-4.7*/	"PCH_PWR_RESET_N", "FM_BOARD_SKU_ID0", "FM_BOARD_SKU_ID1", "FM_BOARD_SKU_ID2", "FM_BOARD_SKU_ID3", "FM_BOARD_SKU_ID4", "FM_BOARD_REV_ID0", "FM_BOARD_REV_ID1";
+	};
+	gpio@39 {
+		compatible = "nxp,pca9554";
+		reg = <0x39>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"FAN_FAULT_0", "FAN_FAULT_1", "FAN_FAULT_2", "FAN_FAULT_3", "FAN_FAULT_4", "FAN_FAULT_5", "FAN_FAULT_6", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	mux-expa@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			rsra-mux@72 {
+				compatible = "nxp,pca9548";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+					at24@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+						pagesize = <32>;
+						size = <8192>;
+						address-width = <16>;
+					};
+				};
+			};
+		};
+	};
+	mux-sata@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	mux-expb@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			rsrb-mux@72 {
+				compatible = "nxp,pca9548";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+					at24@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+						pagesize = <32>;
+						size = <8192>;
+						address-width = <16>;
+					};
+				};
+			};
+			at24@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+				size = <8192>;
+				address-width = <16>;
+			};
+		};
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x07>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0C>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0D>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman-sx20.dts b/arch/arm/boot/dts/aspeed-bmc-vegman-sx20.dts
new file mode 100644
index 000000000000..e36ee4704994
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-vegman-sx20.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN Sx20 BMC";
+	compatible = "yadro,vegman-sx20-bmc", "aspeed,ast2500";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
+	/*F0-F7*/	"NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED","SKT1_FAULT_LED","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","BMC_GPU_RISER_ID1","BMC_GPU_RISER_ID0","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","_SPI2_BMC_CS_SEL",
+	/*P0-P7*/	"","P12V_HDDS_A_EN","P12V_HDDS_B_EN","P5V_HDDS_A_EN","PWRGD_P5V_HDDS_A","P5V_HDDS_B_EN","PWRGD_P5V_HDDS_B","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_RMM4_LITE_CS","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"", "", "CPU1_PE3_0_SLOT_PRSNT", "", "CPU1_PE1_GPU_PRSNT", "CPU1_PE3_1_SLOT_PRSNT", "PE_PCH_MEZ_PRSNT", "CPU0_PE3_1_SLOT_PRSNT",
+		/*IO1.0-1.7*/	"CPU0_PE1_GPU_PRSNT", "CPU0_PE2_NVME2_PRSNT", "CPU1_PE2_NVME3_PRSNT", "CPU1_PE2_SLOT_PRSNT", "CPU1_PE2_NVME4_PRSNT", "", "CPU0_PE2_NVME1_PRSNT", "CPU0_PE3_0_RAID_PRSNT";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1",
+		/*IO3.0-3.7*/	"PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1",
+		/*IO4.0-4.7*/	"PWRGD_P5V_HDDS_A_R", "PWRGD_P5V_HDDS_B_R", "", "", "", "", "", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	mux-expa@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+	mux-sata@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	mux-expb@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman.dtsi b/arch/arm/boot/dts/aspeed-bmc-vegman.dtsi
new file mode 100644
index 000000000000..1a5b25b2ea29
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-vegman.dtsi
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		ramoops@9eff0000{
+			compatible = "ramoops";
+			reg = <0x9eff0000 0x10000>;
+			record-size = <0x2000>;
+			console-size = <0x2000>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			label = "platform:blue:indicator";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		status_amber {
+			label = "platform:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		status_green {
+			label = "platform:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power_fault {
+			label = "platform:red:power";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power_ok {
+			label = "platform:green:power";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(AA, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&timer 5 1000000 0>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+			&pinctrl_spi2miso_default
+			&pinctrl_spi2mosi_default
+			&pinctrl_spi2cs0_default>;
+	flash@0 {
+		status = "okay";
+		label = "bios";
+		m25p,fast-read;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			/* KSZ9131 */
+			compatible = "ethernet-phy-id0022.1640";
+			reg = <1>;
+
+			micrel,led-mode = <0>;
+		};
+	};
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+	disable-wp;
+};
+
+&timer {
+	fttmr010,pwm-outputs = <5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_timer5_default>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xCA2>;
+	status = "okay";
+};
+
+&kcs4 {
+	aspeed,lpc-io-reg = <0xCA4>;
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&i2c0 {
+	/* SMB_IPMB_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c1 {
+	/* SMB_CHASSENSOR_STBY_LVC3 */
+	status = "okay";
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	status = "okay";
+};
+
+&i2c3 {
+	/* SMB_HOST_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c4 {
+	/* BMC_PMBUS2_STBY */
+	status = "okay";
+};
+
+&i2c5 {
+	/* SMB_SMLINK0_STBY_LVC3 */
+	bus-frequency = <1000000>;
+	multi-master;
+	status = "okay";
+};
+
+&i2c6 {
+	/* SMB_TEMPSENSOR_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c7 {
+	/* SMB_SM_PMB1_SML1_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c9 {
+	/* SMB_BMC_ETH3_LVC3 */
+	status = "okay";
+};
+
+&i2c10 {
+	/* SMB_BMC_ETH2_LVC3 */
+	status = "okay";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	status = "okay";
+
+	at24@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		size = <8192>;
+		address-width = <16>;
+	};
+};
+
+&i2c12 {
+	/* SMB_BMC_FAULT_EXP_LVC3 */
+	status = "okay";
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index e7a45ba18fc9..530491ae5eb2 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -54,8 +54,7 @@
 		ranges;
 
 		fmc: spi@1e620000 {
-			reg = < 0x1e620000 0x94
-				0x20000000 0x10000000 >;
+			reg = <0x1e620000 0x94>, <0x20000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2400-fmc";
@@ -65,34 +64,42 @@
 			flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@3 {
 				reg = < 3 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@4 {
 				reg = < 4 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 		};
 
 		spi: spi@1e630000 {
-			reg = < 0x1e630000 0x18
-				0x30000000 0x10000000 >;
+			reg = <0x1e630000 0x18>, <0x30000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2400-spi";
@@ -102,6 +109,7 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -343,60 +351,64 @@
 			};
 
 			lpc: lpc@1e789000 {
-				compatible = "aspeed,ast2400-lpc", "simple-mfd";
+				compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
+				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0x0 0x1e789000 0x1000>;
 
-				lpc_bmc: lpc-bmc@0 {
-					compatible = "aspeed,ast2400-lpc-bmc";
-					reg = <0x0 0x80>;
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2400-lpc-ctrl";
+					reg = <0x80 0x10>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@90 {
+					compatible = "aspeed,ast2400-lpc-snoop";
+					reg = <0x90 0x8>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2400-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
 				};
 
-				lpc_host: lpc-host@80 {
-					compatible = "aspeed,ast2400-lpc-host", "simple-mfd", "syscon";
-					reg = <0x80 0x1e0>;
-					reg-io-width = <4>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x80 0x1e0>;
-
-					lpc_ctrl: lpc-ctrl@0 {
-						compatible = "aspeed,ast2400-lpc-ctrl";
-						reg = <0x0 0x10>;
-						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-						status = "disabled";
-					};
-
-					lpc_snoop: lpc-snoop@10 {
-						compatible = "aspeed,ast2400-lpc-snoop";
-						reg = <0x10 0x8>;
-						interrupts = <8>;
-						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-						status = "disabled";
-					};
-
-					lhc: lhc@20 {
-						compatible = "aspeed,ast2400-lhc";
-						reg = <0x20 0x24 0x48 0x8>;
-					};
-
-					lpc_reset: reset-controller@18 {
-						compatible = "aspeed,ast2400-lpc-reset";
-						reg = <0x18 0x4>;
-						#reset-cells = <1>;
-					};
-
-					ibt: ibt@c0  {
-						compatible = "aspeed,ast2400-ibt-bmc";
-						reg = <0xc0 0x18>;
-						interrupts = <8>;
-						status = "disabled";
-					};
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2400-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
 				};
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2400-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				uart_routing: uart-routing@9c {
+					compatible = "aspeed,ast2400-uart-routing";
+					reg = <0x9c 0x4>;
+					status = "disabled";
+				};
+			};
+
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2400-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
 			};
 
 			uart2: serial@1e78d000 {
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 21930521a986..04f98d1dbb97 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -55,8 +55,7 @@
 		ranges;
 
 		fmc: spi@1e620000 {
-			reg = < 0x1e620000 0xc4
-				0x20000000 0x10000000 >;
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-fmc";
@@ -67,25 +66,27 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
 
 		spi1: spi@1e630000 {
-			reg = < 0x1e630000 0xc4
-				0x30000000 0x08000000 >;
+			reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-spi";
@@ -95,19 +96,20 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
 
 		spi2: spi@1e631000 {
-			reg = < 0x1e631000 0xc4
-				0x38000000 0x08000000 >;
+			reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-spi";
@@ -117,12 +119,14 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -258,12 +262,21 @@
 				quality = <100>;
 			};
 
+			hace: crypto@1e6e3000 {
+				compatible = "aspeed,ast2500-hace";
+				reg = <0x1e6e3000 0x100>;
+				interrupts = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
 			gfx: display@1e6e6000 {
 				compatible = "aspeed,ast2500-gfx", "syscon";
 				reg = <0x1e6e6000 0x1000>;
 				reg-io-width = <4>;
 				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
 				resets = <&syscon ASPEED_RESET_CRT1>;
+				syscon = <&syscon>;
 				status = "disabled";
 				interrupts = <0x19>;
 			};
@@ -351,7 +364,6 @@
 				reg = <0x1e780200 0x0100>;
 				clocks = <&syscon ASPEED_CLK_APB>;
 				interrupt-controller;
-				ngpios = <8>;
 				bus-frequency = <12000000>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_sgpm_default>;
@@ -434,92 +446,97 @@
 			};
 
 			lpc: lpc@1e789000 {
-				compatible = "aspeed,ast2500-lpc", "simple-mfd";
+				compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
+				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0x0 0x1e789000 0x1000>;
 
-				lpc_bmc: lpc-bmc@0 {
-					compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon";
-					reg = <0x0 0x80>;
-					reg-io-width = <4>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x0 0x80>;
-
-					kcs1: kcs@24 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
-						interrupts = <8>;
-						status = "disabled";
-					};
-					kcs2: kcs@28 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
-						interrupts = <8>;
-						status = "disabled";
-					};
-					kcs3: kcs@2c {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
-						interrupts = <8>;
-						status = "disabled";
-					};
+				kcs1: kcs@24 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs2: kcs@28 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs3: kcs@2c {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs4: kcs@114 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
 				};
 
-				lpc_host: lpc-host@80 {
-					compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
-					reg = <0x80 0x1e0>;
-					reg-io-width = <4>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x80 0x1e0>;
-
-					kcs4: kcs@94 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
-						interrupts = <8>;
-						status = "disabled";
-					};
-
-					lpc_ctrl: lpc-ctrl@0 {
-						compatible = "aspeed,ast2500-lpc-ctrl";
-						reg = <0x0 0x10>;
-						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-						status = "disabled";
-					};
-
-					lpc_snoop: lpc-snoop@10 {
-						compatible = "aspeed,ast2500-lpc-snoop";
-						reg = <0x10 0x8>;
-						interrupts = <8>;
-						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-						status = "disabled";
-					};
-
-					lpc_reset: reset-controller@18 {
-						compatible = "aspeed,ast2500-lpc-reset";
-						reg = <0x18 0x4>;
-						#reset-cells = <1>;
-					};
-
-					lhc: lhc@20 {
-						compatible = "aspeed,ast2500-lhc";
-						reg = <0x20 0x24 0x48 0x8>;
-					};
-
-
-					ibt: ibt@c0 {
-						compatible = "aspeed,ast2500-ibt-bmc";
-						reg = <0xc0 0x18>;
-						interrupts = <8>;
-						status = "disabled";
-					};
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2500-lpc-ctrl";
+					reg = <0x80 0x10>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
 				};
+
+				lpc_snoop: lpc-snoop@90 {
+					compatible = "aspeed,ast2500-lpc-snoop";
+					reg = <0x90 0x8>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2500-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				uart_routing: uart-routing@9c {
+					compatible = "aspeed,ast2500-uart-routing";
+					reg = <0x9c 0x4>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2500-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2500-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+			};
+
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2500-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
 			};
 
 			uart2: serial@1e78d000 {
diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 7028e21bdd98..7cd4f075e325 100644
--- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -117,9 +117,9 @@
 		groups = "FWSPID";
 	};
 
-	pinctrl_fwqspid_default: fwqspid_default {
-		function = "FWQSPID";
-		groups = "FWQSPID";
+	pinctrl_fwqspi_default: fwqspi_default {
+		function = "FWQSPI";
+		groups = "FWQSPI";
 	};
 
 	pinctrl_fwspiwp_default: fwspiwp_default {
@@ -208,12 +208,12 @@
 	};
 
 	pinctrl_hvi3c3_default: hvi3c3_default {
-		function = "HVI3C3";
+		function = "I3C3";
 		groups = "HVI3C3";
 	};
 
 	pinctrl_hvi3c4_default: hvi3c4_default {
-		function = "HVI3C4";
+		function = "I3C4";
 		groups = "HVI3C4";
 	};
 
@@ -653,12 +653,12 @@
 	};
 
 	pinctrl_qspi1_default: qspi1_default {
-		function = "QSPI1";
+		function = "SPI1";
 		groups = "QSPI1";
 	};
 
 	pinctrl_qspi2_default: qspi2_default {
-		function = "QSPI2";
+		function = "SPI2";
 		groups = "QSPI2";
 	};
 
@@ -862,11 +862,21 @@
 		groups = "SGPM1";
 	};
 
+	pinctrl_sgpm2_default: sgpm2_default {
+		function = "SGPM2";
+		groups = "SGPM2";
+	};
+
 	pinctrl_sgps1_default: sgps1_default {
 		function = "SGPS1";
 		groups = "SGPS1";
 	};
 
+	pinctrl_sgps2_default: sgps2_default {
+		function = "SGPS2";
+		groups = "SGPS2";
+	};
+
 	pinctrl_sioonctrl_default: sioonctrl_default {
 		function = "SIOONCTRL";
 		groups = "SIOONCTRL";
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 3ee470c2b7b5..172dd748d807 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -36,6 +36,10 @@
 		serial4 = &uart5;
 		serial5 = &vuart1;
 		serial6 = &vuart2;
+		mdio0 = &mdio0;
+		mdio1 = &mdio1;
+		mdio2 = &mdio2;
+		mdio3 = &mdio3;
 	};
 
 
@@ -94,9 +98,13 @@
 			    <0x40466000 0x2000>;
 			};
 
+		ahbc: bus@1e600000 {
+			compatible = "aspeed,ast2600-ahbc", "syscon";
+			reg = <0x1e600000 0x100>;
+		};
+
 		fmc: spi@1e620000 {
-			reg = < 0x1e620000 0xc4
-				0x20000000 0x10000000 >;
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2600-fmc";
@@ -107,25 +115,27 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
 
 		spi1: spi@1e630000 {
-			reg = < 0x1e630000 0xc4
-				0x30000000 0x10000000 >;
+			reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2600-spi";
@@ -135,19 +145,20 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
 
 		spi2: spi@1e631000 {
-			reg = < 0x1e631000 0xc4
-				0x50000000 0x10000000 >;
+			reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2600-spi";
@@ -157,18 +168,21 @@
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -181,6 +195,7 @@
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio1_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio1: mdio@1e650008 {
@@ -191,6 +206,7 @@
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio2_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio2: mdio@1e650010 {
@@ -201,6 +217,7 @@
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio3_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mdio3: mdio@1e650018 {
@@ -211,6 +228,7 @@
 			status = "disabled";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mdio4_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
 		};
 
 		mac0: ftgmac@1e660000 {
@@ -298,12 +316,30 @@
 			status = "disabled";
 		};
 
+		udc: usb@1e6a2000 {
+			compatible = "aspeed,ast2600-udc";
+			reg = <0x1e6a2000 0x300>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bd_default>;
+			status = "disabled";
+		};
+
 		apb {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 
+			hace: crypto@1e6d0000 {
+				compatible = "aspeed,ast2600-hace";
+				reg = <0x1e6d0000 0x200>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
 			syscon: syscon@1e6e2000 {
 				compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1000>;
@@ -351,6 +387,17 @@
 				quality = <100>;
 			};
 
+			gfx: display@1e6e6000 {
+				compatible = "aspeed,ast2600-gfx", "syscon";
+				reg = <0x1e6e6000 0x1000>;
+				reg-io-width = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+				resets = <&syscon ASPEED_RESET_GRAPHICS>;
+				syscon = <&syscon>;
+				status = "disabled";
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			xdma: xdma@1e6e7000 {
 				compatible = "aspeed,ast2600-xdma";
 				reg = <0x1e6e7000 0x100>;
@@ -364,6 +411,49 @@
 				status = "disabled";
 			};
 
+			adc0: adc@1e6e9000 {
+				compatible = "aspeed,ast2600-adc0";
+				reg = <0x1e6e9000 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			adc1: adc@1e6e9100 {
+				compatible = "aspeed,ast2600-adc1";
+				reg = <0x1e6e9100 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sbc: secure-boot-controller@1e6f2000 {
+				compatible = "aspeed,ast2600-sbc";
+				reg = <0x1e6f2000 0x1000>;
+			};
+
+			acry: crypto@1e6fa000 {
+				compatible = "aspeed,ast2600-acry";
+				reg = <0x1e6fa000 0x400>, <0x1e710000 0x1800>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_RSACLK>;
+				aspeed,ahbc = <&ahbc>;
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2600-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			gpio0: gpio@1e780000 {
 				#gpio-cells = <2>;
 				gpio-controller;
@@ -377,6 +467,34 @@
 				#interrupt-cells = <2>;
 			};
 
+			sgpiom0: sgpiom@1e780500 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-sgpiom";
+				reg = <0x1e780500 0x100>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm1_default>;
+				status = "disabled";
+			};
+
+			sgpiom1: sgpiom@1e780600 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-sgpiom";
+				reg = <0x1e780600 0x100>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm2_default>;
+				status = "disabled";
+			};
+
 			gpio1: gpio@1e780800 {
 				#gpio-cells = <2>;
 				gpio-controller;
@@ -459,92 +577,97 @@
 				status = "disabled";
 			};
 
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2600-peci";
+				reg = <0x1e78b000 0x100>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
 			lpc: lpc@1e789000 {
-				compatible = "aspeed,ast2600-lpc", "simple-mfd";
+				compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
+				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0x0 0x1e789000 0x1000>;
 
-				lpc_bmc: lpc-bmc@0 {
-					compatible = "aspeed,ast2600-lpc-bmc", "simple-mfd", "syscon";
-					reg = <0x0 0x80>;
-					reg-io-width = <4>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x0 0x80>;
-
-					kcs1: kcs@24 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
-						interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-						kcs_chan = <1>;
-						status = "disabled";
-					};
-					kcs2: kcs@28 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
-						interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-					};
-					kcs3: kcs@2c {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
-						interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-					};
+				kcs1: kcs@24 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+					interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					kcs_chan = <1>;
+					status = "disabled";
+				};
+
+				kcs2: kcs@28 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+					interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs3: kcs@2c {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+					interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs4: kcs@114 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
+					interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2600-lpc-ctrl";
+					reg = <0x80 0x80>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@80 {
+					compatible = "aspeed,ast2600-lpc-snoop";
+					reg = <0x80 0x80>;
+					interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2600-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2600-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				uart_routing: uart-routing@98 {
+					compatible = "aspeed,ast2600-uart-routing";
+					reg = <0x98 0x8>;
+					status = "disabled";
 				};
 
-				lpc_host: lpc-host@80 {
-					compatible = "aspeed,ast2600-lpc-host", "simple-mfd", "syscon";
-					reg = <0x80 0x1e0>;
-					reg-io-width = <4>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x80 0x1e0>;
-
-					kcs4: kcs@94 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
-						interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-					};
-
-					lpc_ctrl: lpc-ctrl@0 {
-						compatible = "aspeed,ast2600-lpc-ctrl";
-						reg = <0x0 0x80>;
-						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-						status = "disabled";
-					};
-
-					lpc_snoop: lpc-snoop@0 {
-						compatible = "aspeed,ast2600-lpc-snoop";
-						reg = <0x0 0x80>;
-						interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-						status = "disabled";
-					};
-
-					lhc: lhc@20 {
-						compatible = "aspeed,ast2600-lhc";
-						reg = <0x20 0x24 0x48 0x8>;
-					};
-
-					lpc_reset: reset-controller@18 {
-						compatible = "aspeed,ast2600-lpc-reset";
-						reg = <0x18 0x4>;
-						#reset-cells = <1>;
-					};
-
-					ibt: ibt@c0 {
-						compatible = "aspeed,ast2600-ibt-bmc";
-						reg = <0xc0 0x18>;
-						interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-					};
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2600-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
 				};
 			};
 
@@ -658,6 +781,62 @@
 				status = "disabled";
 			};
 
+			uart6: serial@1e790000 {
+				compatible = "ns16550a";
+				reg = <0x1e790000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART6CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart6_default>;
+
+				status = "disabled";
+			};
+
+			uart7: serial@1e790100 {
+				compatible = "ns16550a";
+				reg = <0x1e790100 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART7CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart7_default>;
+
+				status = "disabled";
+			};
+
+			uart8: serial@1e790200 {
+				compatible = "ns16550a";
+				reg = <0x1e790200 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART8CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart8_default>;
+
+				status = "disabled";
+			};
+
+			uart9: serial@1e790300 {
+				compatible = "ns16550a";
+				reg = <0x1e790300 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART9CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart9_default>;
+
+				status = "disabled";
+			};
+
 			i2c: bus@1e78a000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
@@ -684,6 +863,15 @@
 				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
 				status = "disabled";
 			};
+
+			udma: dma-controller@1e79e000 {
+				compatible = "aspeed,ast2600-udma";
+				reg = <0x1e79e000 0x1000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				dma-channels = <28>;
+				#dma-cells = <1>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi
index 73a5503be78c..4e5e786e18b7 100644
--- a/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi
@@ -115,3 +115,7 @@
 &vhub {
 	status = "okay";
 };
+
+&adc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
new file mode 100644
index 000000000000..31590d3186a2
--- /dev/null
+++ b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+		spi1 = &spi1;
+		spi2 = &spi_gpio;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw vmalloc=640M";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	/*
+	 * GPIO-based SPI Master is required to access SPI TPM, because
+	 * full-duplex SPI transactions are not supported by ASPEED SPI
+	 * Controllers.
+	 */
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+
+		tpmdev@0 {
+			compatible = "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.0";
+
+#include "facebook-bmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1@0 {
+				reg = <0x0 0x8000000>;
+				label = "flash1";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
index c1c8650dafce..3542ad8a243e 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
@@ -44,7 +44,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "mxicy,mx25u4035", "jedec,spi-nor";
 		spi-max-frequency = <33000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index 7edf057047f8..9dfd5de808d1 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -155,10 +155,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		btn {
+		button {
 			label = "Button";
 			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts
index 5a81cab5fc3a..551300fd7746 100644
--- a/arch/arm/boot/dts/at91-gatwick.dts
+++ b/arch/arm/boot/dts/at91-gatwick.dts
@@ -13,7 +13,7 @@
 	model = "Laird Workgroup Bridge 50N - Project Gatwick";
 	compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
 
@@ -31,37 +31,37 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ethernet {
+		led-ethernet {
 			label = "gatwick:yellow:ethernet";
 			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		wifi {
+		led-wifi {
 			label = "gatwick:green:wifi";
 			gpios = <&pioA 28 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		ble {
+		led-ble {
 			label = "gatwick:blue:ble";
 			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		lora {
+		led-lora {
 			label = "gatwick:orange:lora";
 			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		blank {
+		led-blank {
 			label = "gatwick:green:blank";
 			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		user {
+		led-user {
 			label = "gatwick:yellow:user";
 			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 3b8812fcd854..307663b4eec2 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -28,19 +28,17 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		reset {
+		button-reset {
 			label = "PB_RST";
 			gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
 			wakeup-source;
 		};
 
-		user {
+		button-user {
 			label = "PB_USER";
 			gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x101>;
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
index c08834ddf07b..e5e21dff882f 100644
--- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
@@ -31,26 +31,24 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		prog {
+		button-prog {
 			label = "PB_PROG";
 			gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
 			wakeup-source;
 		};
 
-		reset {
+		button-reset {
 			label = "PB_RST";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
 			wakeup-source;
 		};
 
-		user {
+		button-user {
 			label = "PB_USER";
 			gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x101>;
diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
index 2799b2a1f4d2..7075df6549e9 100644
--- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
+++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
@@ -55,7 +55,7 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default" , "default", "default",
 				"default", "default" ;
@@ -68,35 +68,35 @@
 			     &pinctrl_pio_zbe_rst>;
 		pinctrl-4 = <&pinctrl_pio_input>;
 
-		SW1 {
+		switch-1 {
 			label = "SW1";
 			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
 			linux,code = <0x101>;
 			wakeup-source;
 		};
 
-		SW2 {
+		switch-2 {
 			label = "SW2";
 			gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
 			wakeup-source;
 		};
 
-		SW3 {
+		switch-3 {
 			label = "SW3";
 			gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
 			wakeup-source;
 		};
 
-		SW7 {
+		switch-7 {
 			label = "SW7";
 			gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
 			linux,code = <0x107>;
 			wakeup-source;
 		};
 
-		SW8 {
+		switch-8 {
 			label = "SW8";
 			gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
 			linux,code = <0x108>;
@@ -186,7 +186,7 @@
 
 &pioA {
 	pinctrl_key_gpio_default: key_gpio_default {
-		pinmux=  <PIN_PA22__GPIO>,
+		pinmux = <PIN_PA22__GPIO>,
 		<PIN_PA24__GPIO>,
 		<PIN_PA26__GPIO>,
 		<PIN_PA29__GPIO>,
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
index c4b3750495da..abe27adfa4d6 100644
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -336,7 +336,7 @@
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
index 9c622892c692..42640fe6b6d0 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
@@ -36,17 +36,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		prog {
+		key-prog {
 			label = "PB_PROG";
 			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
 			wakeup-source;
 		};
 
-		reset {
+		key-reset {
 			label = "PB_RST";
 			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
diff --git a/arch/arm/boot/dts/at91-lmu5000.dts b/arch/arm/boot/dts/at91-lmu5000.dts
new file mode 100644
index 000000000000..f8863d7c0798
--- /dev/null
+++ b/arch/arm/boot/dts/at91-lmu5000.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree file for CalAmp LMU5000 board
+ *
+ * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
+ */
+
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "CalAmp LMU5000";
+	compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+			status = "okay";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				kernel@0 {
+					label = "kernel";
+					reg = <0x0 0x400000>;
+				};
+
+				rootfs@400000 {
+					label = "rootfs";
+					reg = <0x400000 0x3C00000>;
+				};
+
+				user1@4000000 {
+					label = "user1";
+					reg = <0x4000000 0x2000000>;
+				};
+
+				user2@6000000 {
+					label = "user2";
+					reg = <0x6000000 0x2000000>;
+				};
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_pck0_as_mck: pck0_as_mck {
+			atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb0 {
+		pinctrl_usb1_vbus_gpio: usb0_vbus_gpio {
+			atmel,pins = <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&ssc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_ssc0_tx>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usart0 {
+	pinctrl-0 =
+		<&pinctrl_usart0
+		 &pinctrl_usart0_rts
+		 &pinctrl_usart0_cts
+		 &pinctrl_usart0_dtr_dsr
+		 &pinctrl_usart0_dcd
+		 &pinctrl_usart0_ri>;
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <2>;
+	status = "okay";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+	atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index 4f123477e631..f71377c9b757 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -18,7 +18,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "Wakeup";
 			linux,code = <10>;
 			wakeup-source;
diff --git a/arch/arm/boot/dts/at91-q5xr5.dts b/arch/arm/boot/dts/at91-q5xr5.dts
new file mode 100644
index 000000000000..9cf60b6f695c
--- /dev/null
+++ b/arch/arm/boot/dts/at91-q5xr5.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree file for Exegin Q5xR5 board
+ *
+ * Copyright (C) 2014 Owen Kirby <osk@exegin.com>
+ */
+
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "Exegin Q5x (rev5)";
+	compatible = "exegin,q5xr5", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rootfstype=squashfs,jffs2";
+	};
+
+	memory {
+		reg = <0x20000000 0x0>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "cfi-flash";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x1000000 0x800000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			kernel@0 {
+				label = "kernel";
+				reg = <0x0 0x200000>;
+			};
+
+			rootfs@200000 {
+				label = "rootfs";
+				reg = <0x200000 0x600000>;
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_pck0_as_mck: pck0_as_mck {
+			atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	spi0 {
+		pinctrl_spi0: spi0-0 {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi0_npcs0: spi0_npcs0 {
+			atmel,pins = <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi0_npcs1: spi0_npcs1 {
+			atmel,pins = <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	spi1 {
+		pinctrl_spi1: spi1-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_npcs0: spi1_npcs0 {
+			atmel,pins = <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_npcs1: spi1_npcs1 {
+			atmel,pins = <AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0 &pinctrl_spi0_npcs0 &pinctrl_spi0_npcs1>;
+	cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91boot@0 {
+			label = "at91boot";
+			reg = <0x0 0x4000>;
+		};
+
+		uenv@4000 {
+			label = "uboot-env";
+			reg = <0x4000 0x4000>;
+		};
+
+		uboot@8000 {
+			label = "uboot";
+			reg = <0x8000 0x3E000>;
+		};
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1 &pinctrl_spi1_npcs0 &pinctrl_spi1_npcs1>;
+	cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>, <&pioC 5 GPIO_ACTIVE_LOW>, <0>, <0>;
+	status = "okay";
+};
+
+&usart0 {
+	pinctrl-0 =
+		<&pinctrl_usart0
+		 &pinctrl_usart0_rts
+		 &pinctrl_usart0_cts
+		 &pinctrl_usart0_dtr_dsr
+		 &pinctrl_usart0_dcd
+		 &pinctrl_usart0_ri>;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <2>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index 969d990767fc..9d26f9996348 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -198,10 +198,8 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb {
+		button-user {
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
index 1e2a28c2f365..2fb51b9aca2a 100644
--- a/arch/arm/boot/dts/at91-sam9_l9260.dts
+++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
@@ -101,7 +101,7 @@
 		nand0: nand@40000000 {
 			nand-bus-width = <8>;
 			nand-ecc-mode = "soft";
-			nand-on-flash-bbt = <1>;
+			nand-on-flash-bbt;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/at91-sam9x60_curiosity.dts
new file mode 100644
index 000000000000..cb86a3a170ce
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sam9x60_curiosity.dts
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60_curiosity.dts - Device Tree file for Microchip SAM9X60 Curiosity board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAM9X60 Curiosity";
+	compatible = "microchip,sam9x60-curiosity", "microchip,sam9x60", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c6;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "PB_USER";
+			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-red {
+			label = "red";
+			gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioD 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+
+	vdd_1v8: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_1V8";
+	};
+
+	vdd_1v15: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1150000>;
+		regulator-min-microvolt = <1150000>;
+		regulator-name = "VDD_1V15";
+	};
+
+	vdd1_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD1_3V3";
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd1_3v3>;
+	vref-supply = <&vdd1_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_rx_tx>;
+	status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_rx_tx>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_lsb>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0xc0000>;
+				};
+
+				ubootenvred@100000 {
+					label = "U-Boot Env Redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				ubootenv@140000 {
+					label = "U-Boot Env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c0: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+			pagesize = <16>;
+		};
+	};
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx6_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "disabled";
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx7_default>;
+		status = "okay";
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_rmii>;
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
+
+&pinctrl {
+	adc {
+		pinctrl_adc_default: adc-default {
+			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_adtrg_default: adtrg-default {
+			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	can0 {
+		pinctrl_can0_rx_tx: can0-rx-tx {
+			atmel,pins =
+				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
+				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
+				 AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	can1 {
+		pinctrl_can1_rx_tx: can1-rx-tx {
+			atmel,pins =
+				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 */
+				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 */
+				 AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	ebi {
+		pinctrl_ebi_data_lsb: ebi-data-lsb {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_ebi_addr_nand: ebi-addr-nand {
+			atmel,pins =
+				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx0_default: flx0-twi {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx6_default: flx6-twi {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx7_default: flx7-usart {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+				 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+		};
+	};
+
+	gpio-keys {
+		pinctrl_key_gpio_default: pinctrl-key-gpio {
+			atmel,pins = <AT91_PIOA 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	leds {
+		pinctrl_gpio_leds: gpio-leds {
+			atmel,pins = <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	macb0 {
+		pinctrl_macb0_rmii: macb0-rmii-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+		};
+	};
+
+	nand {
+		pinctrl_nand_oe_we: nand-oe-we-0 {
+			atmel,pins =
+				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_nand_rb: nand-rb-0 {
+			atmel,pins =
+				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_nand_cs: nand-cs-0 {
+			atmel,pins =
+				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	pwm0 {
+		pinctrl_pwm0_0: pwm0-0 {
+			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_1: pwm0-1 {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_2: pwm0-2 {
+			atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0 {
+			atmel,pins =
+				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
+				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
+				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
+				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
+				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
+				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
+		};
+
+		pinctrl_sdmmc0_cd: sdmmc0-cd {
+			atmel,pins =
+				<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc1 {
+		pinctrl_sdmmc1_default: sdmmc1 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA13 CK periph B */
+				 AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA12 CMD periph B with pullup */
+				 AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA11 DAT0 periph B with pullup */
+				 AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA2 DAT1 periph B with pullup */
+				 AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA3 DAT2 periph B with pullup */
+				 AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA4 DAT3 periph B with pullup */
+		};
+	};
+
+	usb0 {
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins = <AT91_PIOA 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb1 {
+		pinctrl_usb_default: usb-default {
+			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
+	cd-gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	disable-wp;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA 27 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 18 GPIO_ACTIVE_HIGH
+			   &pioD 15 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 73b6b1f89de9..5cd593028aff 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Microchip SAM9X60-EK";
@@ -15,8 +16,8 @@
 
 	aliases {
 		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		serial1 = &uart1;
+		i2c1 = &i2c6;
+		serial1 = &uart5;
 	};
 
 	chosen {
@@ -33,64 +34,23 @@
 		};
 	};
 
-	regulators: regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_1v8: fixed-regulator-vdd_1v8@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD_1V8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			status = "okay";
-		};
-
-		vdd_1v5: fixed-regulator-vdd_1v5@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD_1V5";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-			status = "okay";
-		};
-
-		vdd1_3v3: fixed-regulator-vdd1_3v3@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD1_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			status = "okay";
-		};
-
-		vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
-			compatible = "regulator-fixed";
-			regulator-name = "VDD2_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			status = "okay";
-		};
-	};
-
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
-		status = "okay";
 
-		sw1 {
+		button-1 {
 			label = "SW1";
 			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
-			linux,code=<0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay"; /* Conflict with pwm0. */
 
 		red {
@@ -109,6 +69,38 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	vdd_1v8: fixed-regulator-vdd_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v15: fixed-regulator-vdd_1v15 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-always-on;
+	};
+
+	vdd1_3v3: fixed-regulator-vdd1_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD1_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd2_3v3: regulator-fixed-vdd2_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD2_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &adc {
@@ -215,25 +207,20 @@
 	status = "okay";
 
 	i2c0: i2c@600 {
-		compatible = "microchip,sam9x60-i2c";
-		reg = <0x600 0x200>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+		dmas = <0>, <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx0_default>;
-		atmel,fifo-size = <16>;
 		i2c-analog-filter;
 		i2c-digital-filter;
 		i2c-digital-filter-width-ns = <35>;
 		status = "okay";
 
 		eeprom@53 {
-			compatible = "atmel,24c32";
+			compatible = "atmel,24c02";
 			reg = <0x53>;
 			pagesize = <16>;
-			size = <128>;
 			status = "okay";
 		};
 	};
@@ -243,17 +230,10 @@
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
 	status = "disabled";
 
-	spi0: spi@400 {
-		compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
-		reg = <0x400 0x200>;
-		interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
-		clock-names = "spi_clk";
+	spi4: spi@400 {
+		dmas = <0>, <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx4_default>;
-		atmel,fifo-size = <16>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		status = "disabled";
 	};
 };
@@ -262,23 +242,9 @@
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
 	status = "okay";
 
-	uart1: serial@200 {
-		compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
-		reg = <0x200 0x200>;
-		interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(10))>,
-		       <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(11))>;
-		dma-names = "tx", "rx";
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
-		clock-names = "usart";
-		pinctrl-0 = <&pinctrl_flx5_default>;
+	uart5: serial@200 {
 		pinctrl-names = "default";
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
+		pinctrl-0 = <&pinctrl_flx5_default>;
 		status = "okay";
 	};
 };
@@ -287,16 +253,12 @@
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
 	status = "okay";
 
-	i2c1: i2c@600 {
-		compatible = "microchip,sam9x60-i2c";
-		reg = <0x600 0x200>;
-		interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+	i2c6: i2c@600 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+		dmas = <0>, <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx6_default>;
-		atmel,fifo-size = <16>;
 		i2c-analog-filter;
 		i2c-digital-filter;
 		i2c-digital-filter-width-ns = <35>;
@@ -334,14 +296,6 @@
 };
 
 &pinctrl {
-	atmel,mux-mask = <
-			 /*	A	B	C	*/
-			 0xFFFFFE7F 0xC0E0397F 0xEF00019D	/* pioA */
-			 0x03FFFFFF 0x02FC7E68 0x00780000	/* pioB */
-			 0xffffffff 0xF83FFFFF 0xB800F3FC	/* pioC */
-			 0x003FFFFF 0x003F8000 0x00000000	/* pioD */
-			 >;
-
 	adc {
 		pinctrl_adc_default: adc_default {
 			atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
@@ -455,7 +409,7 @@
 				 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 		};
 
-		pinctrl_flx5_default: flx_uart {
+		pinctrl_flx5_default: flx5_uart {
 			atmel,pins =
 				<AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
 				 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
@@ -544,6 +498,10 @@
 				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
 				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
 		};
+		pinctrl_sdmmc0_cd: sdmmc0_cd {
+			atmel,pins =
+				<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
 	};
 
 	sdmmc1 {
@@ -576,6 +534,14 @@
 				      AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 		};
 	};
+
+	leds {
+		pinctrl_gpio_leds: gpio_leds {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
 }; /* pinctrl */
 
 &pwm0 {
@@ -587,7 +553,7 @@
 &sdmmc0 {
 	bus-width = <4>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
 	status = "okay";
 	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
 	disable-wp;
@@ -612,7 +578,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <80000000>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-ns = <7>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		m25p,fast-read;
@@ -655,7 +622,7 @@
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	status = "okay";
 
 	input@0 {
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index 1b1163858b1d..95ecb7d040a8 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -8,13 +8,14 @@
  */
 #include "sama5d2.dtsi"
 #include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Atmel SAMA5D27 SoM1";
 	compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
 
 	aliases {
-		i2c0	= &i2c0;
+		i2c0 = &i2c0;
 	};
 
 	clocks {
@@ -42,37 +43,38 @@
 					#size-cells = <1>;
 					compatible = "jedec,spi-nor";
 					reg = <0>;
-					spi-max-frequency = <80000000>;
+					spi-max-frequency = <104000000>;
+					spi-cs-setup-ns = <7>;
 					spi-tx-bus-width = <4>;
 					spi-rx-bus-width = <4>;
 					m25p,fast-read;
 
-					at91bootstrap@00000000 {
+					at91bootstrap@0 {
 						label = "at91bootstrap";
 						reg = <0x00000000 0x00040000>;
 					};
 
-					bootloader@00040000 {
+					bootloader@40000 {
 						label = "bootloader";
 						reg = <0x00040000 0x000c0000>;
 					};
 
-					bootloaderenvred@00100000 {
+					bootloaderenvred@100000 {
 						label = "bootloader env redundant";
 						reg = <0x00100000 0x00040000>;
 					};
 
-					bootloaderenv@00140000 {
+					bootloaderenv@140000 {
 						label = "bootloader env";
 						reg = <0x00140000 0x00040000>;
 					};
 
-					dtb@00180000 {
+					dtb@180000 {
 						label = "device tree";
 						reg = <0x00180000 0x00080000>;
 					};
 
-					kernel@00200000 {
+					kernel@200000 {
 						label = "kernel";
 						reg = <0x00200000 0x00600000>;
 					};
@@ -82,10 +84,12 @@
 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_default>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				phy-mode = "rmii";
 
-				ethernet-phy@0 {
-					reg = <0x0>;
+				ethernet-phy@7 {
+					reg = <0x7>;
 					interrupt-parent = <&pioA>;
 					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
 					pinctrl-names = "default";
@@ -95,8 +99,11 @@
 
 			i2c0: i2c@f8028000 {
 				dmas = <0>, <0>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
 				at24@50 {
@@ -113,6 +120,12 @@
 					bias-disable;
 				};
 
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_qspi1_default: qspi1_default {
 					sck_cs {
 						pinmux = <PIN_PB5__QSPI1_SCK>,
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 84e1180f3e89..52ddd0571f1c 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -11,6 +11,7 @@
 #include "at91-sama5d27_som1.dtsi"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel SAMA5D27 SOM1 EK";
@@ -20,8 +21,8 @@
 		serial0 = &uart1;	/* DBGU */
 		serial1 = &uart4;	/* mikro BUS 1 */
 		serial2 = &uart2;	/* mikro BUS 2 */
-		i2c1	= &i2c1;
-		i2c2	= &i2c3;
+		i2c1 = &i2c1;
+		i2c2 = &i2c3;
 	};
 
 	chosen {
@@ -70,7 +71,6 @@
 			isc: isc@f0008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
-				status = "okay";
 			};
 
 			qspi1: spi@f0024000 {
@@ -130,14 +130,17 @@
 					i2c-analog-filter;
 					i2c-digital-filter;
 					i2c-digital-filter-width-ns = <35>;
-					pinctrl-names = "default";
+					pinctrl-names = "default", "gpio";
 					pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+					pinctrl-1 = <&pinctrl_i2c3_gpio>;
+					sda-gpios = <&pioA PIN_PA24 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PA23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 					status = "okay";
 				};
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 				atmel,wakeup-rtc-timer;
 
 				input@0 {
@@ -215,16 +218,21 @@
 				i2c-analog-filter;
 				i2c-digital-filter;
 				i2c-digital-filter-width-ns = <35>;
-				pinctrl-names = "default";
+				pinctrl-names = "default", "gpio";
 				pinctrl-0 = <&pinctrl_i2c1_default>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 			};
 
 			adc: adc@fc030000 {
 				vddana-supply = <&vddana>;
 				vref-supply = <&advref>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_an &pinctrl_mikrobus2_an>;
 
-				status = "disabled";
+				status = "okay";
 			};
 
 			pinctrl@fc038000 {
@@ -250,6 +258,13 @@
 					bias-disable;
 				};
 
+				pinctrl_i2c1_gpio: i2c1_gpio {
+                                        pinmux = <PIN_PD4__GPIO>,
+                                                 <PIN_PD5__GPIO>;
+                                        bias-disable;
+                                };
+
+
 				pinctrl_isc_base: isc_base {
 					pinmux = <PIN_PC21__ISC_PCK>,
 						 <PIN_PC22__ISC_VSYNC>,
@@ -439,6 +454,12 @@
 					bias-disable;
 				};
 
+				pinctrl_i2c3_gpio: i2c3_gpio {
+					pinmux = <PIN_PA24__GPIO>,
+						 <PIN_PA23__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_flx4_default: flx4_uart_default {
 					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
 						 <PIN_PC29__FLEXCOM4_IO1>,
@@ -457,16 +478,16 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
 
-		pb4 {
+		button {
 			label = "USER";
 			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
@@ -477,17 +498,17 @@
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
 		status = "okay"; /* Conflict with pwm0. */
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
index 025a78310e3a..4617805c7748 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -30,6 +30,14 @@
 			clock-frequency = <24000000>;
 		};
 	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-wilc1000";
+		reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&pioA PIN_PA29 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_wilc_pwrseq>;
+		pinctrl-names = "default";
+	};
 };
 
 &flx1 {
@@ -68,8 +76,8 @@
 		regulators {
 			vdd_3v3: VDD_IO {
 				regulator-name = "VDD_IO";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -87,8 +95,8 @@
 
 			vddio_ddr: VDD_DDR {
 				regulator-name = "VDD_DDR";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -110,8 +118,8 @@
 
 			vdd_core: VDD_CORE {
 				regulator-name = "VDD_CORE";
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1850000>;
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
 				regulator-initial-mode = <2>;
 				regulator-allowed-modes = <2>, <4>;
 				regulator-always-on;
@@ -152,8 +160,8 @@
 
 			LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 
 				regulator-state-standby {
@@ -167,9 +175,8 @@
 
 			LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3700000>;
-				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
 
 				regulator-state-standby {
 					regulator-on-in-suspend;
@@ -186,6 +193,8 @@
 &macb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_macb0_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	phy-mode = "rmii";
 
 	ethernet-phy@0 {
@@ -206,12 +215,13 @@
 	pinctrl-0 = <&pinctrl_qspi1_default>;
 	status = "disabled";
 
-	qspi1_flash: spi_flash@0 {
+	qspi1_flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <80000000>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-ns = <7>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
 		m25p,fast-read;
@@ -310,5 +320,67 @@
 			 <PIN_PB10__QSPI1_IO3>;
 		bias-pull-up;
 	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd-data {
+			pinmux = <PIN_PA28__SDMMC1_CMD>,
+				 <PIN_PA18__SDMMC1_DAT0>,
+				 <PIN_PA19__SDMMC1_DAT1>,
+				 <PIN_PA20__SDMMC1_DAT2>,
+				 <PIN_PA21__SDMMC1_DAT3>;
+			bias-disable;
+		};
+
+		conf-ck {
+			pinmux = <PIN_PA22__SDMMC1_CK>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_wilc_default: wilc_default {
+		conf-irq {
+			pinmux = <PIN_PB25__GPIO>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_wilc_pwrseq: wilc_pwrseq {
+		conf-ce-nrst {
+			pinmux = <PIN_PA27__GPIO>,
+				 <PIN_PA29__GPIO>;
+			bias-disable;
+		};
+
+		conf-rtcclk {
+			pinmux = <PIN_PB13__PCK1>;
+			bias-disable;
+		};
+	};
+};
+
+&sdmmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	no-1-8-v;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+
+	wilc: wifi@0 {
+		reg = <0>;
+		compatible = "microchip,wilc1000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wilc_default>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+		clock-names = "rtc";
+		interrupts = <PIN_PB25 IRQ_TYPE_NONE>;
+		interrupt-parent = <&pioA>;
+		assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+		assigned-clock-rates = <32768>;
+	};
 };
 
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index 180a08765cb8..e055b9e2fe34 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "at91-sama5d27_wlsom1.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Microchip SAMA5D27 WLSOM1 EK";
@@ -18,24 +19,23 @@
 		serial1 = &uart6;	/* BT */
 		serial2 = &uart5;	/* mikro BUS 2 */
 		serial3 = &uart3;	/* mikro BUS 1 */
-		i2c1	= &i2c1;
+		i2c1 = &i2c1;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
-		status = "okay";
 
-		sw4 {
+		button-1 {
 			label = "USER BUTTON";
 			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
@@ -46,17 +46,17 @@
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
 		status = "okay";
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -190,7 +190,7 @@
 &qspi1 {
 	status = "okay";
 
-	qspi1_flash: spi_flash@0 {
+	qspi1_flash: flash@0 {
 		status = "okay";
 	};
 };
@@ -204,7 +204,7 @@
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 46722a163184..999adeca6f33 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -12,6 +12,7 @@
 #include "sama5d2.dtsi"
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
 
 / {
@@ -23,8 +24,8 @@
 		serial1 = &uart1;	/* mikro BUS 3 */
 		serial3 = &uart3;	/* mikro BUS 2 */
 		serial5 = &uart7;	/* flx2 */
-		i2c0	= &i2c0;
-		i2c1	= &i2c1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
 	};
 
 	chosen {
@@ -41,17 +42,16 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
-		status = "okay";
 
-		sw4 {
+		button-1 {
 			label = "USER_PB1";
 			gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
@@ -62,17 +62,17 @@
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
 		status = "okay"; /* conflict with pwm0 */
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -183,6 +183,8 @@
 		dmas = <0>, <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx4_default>;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
 		status = "okay";
 
 		mcp16502@5b {
@@ -194,8 +196,8 @@
 			regulators {
 				vdd_io_reg: VDD_IO {
 					regulator-name = "VDD_IO";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -213,8 +215,8 @@
 
 				VDD_DDR {
 					regulator-name = "VDD_DDR";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -232,8 +234,8 @@
 
 				VDD_CORE {
 					regulator-name = "VDD_CORE";
-					regulator-min-microvolt = <600000>;
-					regulator-max-microvolt = <1850000>;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
 					regulator-always-on;
@@ -255,7 +257,6 @@
 					regulator-max-microvolt = <1850000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
-					regulator-always-on;
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
@@ -270,8 +271,8 @@
 
 				LDO1 {
 					regulator-name = "LDO1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -285,8 +286,8 @@
 
 				LDO2 {
 					regulator-name = "LDO2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 
 					regulator-state-standby {
@@ -304,33 +305,43 @@
 };
 
 &i2c0 { /* mikrobus i2c */
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
 	status = "okay";
 };
 
 &i2c1 {
 	dmas = <0>, <0>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
 	status = "okay";
 
 	eeprom@50 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x50>;
 		pagesize = <16>;
 		status = "okay";
 	};
 
 	eeprom@52 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x52>;
 		pagesize = <16>;
 		status = "disabled";
 	};
 
 	eeprom@53 {
-		compatible = "atmel,24c32";
+		compatible = "atmel,24c02";
 		reg = <0x53>;
 		pagesize = <16>;
 		status = "disabled";
@@ -395,6 +406,12 @@
 		bias-disable;
 	};
 
+	pinctrl_i2c1_gpio: i2c1_gpio {
+                pinmux = <PIN_PD19__GPIO>,
+                         <PIN_PD20__GPIO>;
+                bias-disable;
+        };
+
 	pinctrl_key_gpio_default: key_gpio_default {
 		pinmux = <PIN_PD0__GPIO>;
 		bias-pull-up;
@@ -456,6 +473,12 @@
 		bias-disable;
 	};
 
+	pinctrl_i2c0_gpio: i2c0_gpio {
+		pinmux = <PIN_PD21__GPIO>,
+			 <PIN_PD22__GPIO>;
+		bias-disable;
+	};
+
 	pinctrl_mikrobus1_an: mikrobus1_an {
 		pinmux = <PIN_PD26__GPIO>;
 		bias-disable;
@@ -646,7 +669,8 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <80000000>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-ns = <7>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		m25p,fast-read;
@@ -692,7 +716,7 @@
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 8de57d164acd..bf1c9ca72a9f 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -11,6 +11,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/at91.h>
 
 / {
@@ -19,9 +20,9 @@
 
 	aliases {
 		serial0 = &uart0;	/* DBGU */
-		i2c0	= &i2c0;	/* mikroBUS 1 */
-		i2c1	= &i2c1;	/* XPRO EXT1 */
-		i2c2	= &i2c2;
+		i2c0 = &i2c0;	/* mikroBUS 1 */
+		i2c1 = &i2c1;	/* XPRO EXT1 */
+		i2c2 = &i2c2;
 	};
 
 	chosen {
@@ -92,12 +93,12 @@
 							reg = <0x40000 0xc0000>;
 						};
 
-						bootloaderenvred@0x100000 {
+						bootloaderenvred@100000 {
 							label = "bootloader env redundant";
 							reg = <0x100000 0x40000>;
 						};
 
-						bootloaderenv@0x140000 {
+						bootloaderenv@140000 {
 							label = "bootloader env";
 							reg = <0x140000 0x40000>;
 						};
@@ -138,6 +139,8 @@
 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				phy-mode = "rmii";
 				status = "okay";
 
@@ -202,7 +205,7 @@
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 
 				input@0 {
 					reg = <0>;
@@ -393,16 +396,16 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
 
-		bp1 {
+		button-1 {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
@@ -413,17 +416,17 @@
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
 		status = "okay";
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 4e7cf21f124c..2d53c47d7cc8 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -10,6 +10,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
 
 / {
@@ -65,7 +66,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
 			non-removable;
-			mmc-ddr-1_8v;
+			mmc-ddr-3_3v;
 			status = "okay";
 		};
 
@@ -94,37 +95,37 @@
 					spi-rx-bus-width = <4>;
 					m25p,fast-read;
 
-					at91bootstrap@00000000 {
+					at91bootstrap@0 {
 						label = "at91bootstrap";
 						reg = <0x00000000 0x00040000>;
 					};
 
-					bootloader@00040000 {
+					bootloader@40000 {
 						label = "bootloader";
 						reg = <0x00040000 0x000c0000>;
 					};
 
-					bootloaderenvred@00100000 {
+					bootloaderenvred@100000 {
 						label = "bootloader env redundant";
 						reg = <0x00100000 0x00040000>;
 					};
 
-					bootloaderenv@00140000 {
+					bootloaderenv@140000 {
 						label = "bootloader env";
 						reg = <0x00140000 0x00040000>;
 					};
 
-					dtb@00180000 {
+					dtb@180000 {
 						label = "device tree";
 						reg = <0x00180000 0x00080000>;
 					};
 
-					kernel@00200000 {
+					kernel@200000 {
 						label = "kernel";
 						reg = <0x00200000 0x00600000>;
 					};
 
-					misc@00800000 {
+					misc@800000 {
 						label = "misc";
 						reg = <0x00800000 0x00000000>;
 					};
@@ -136,7 +137,7 @@
 				pinctrl-0 = <&pinctrl_spi0_default>;
 				status = "okay";
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					reg = <0>;
 					spi-max-frequency = <50000000>;
@@ -146,6 +147,8 @@
 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				phy-mode = "rmii";
 				status = "okay";
 
@@ -204,10 +207,10 @@
 
 							regulator-state-mem {
 								regulator-on-in-suspend;
-								regulator-suspend-min-microvolt=<1400000>;
-								regulator-suspend-max-microvolt=<1400000>;
+								regulator-suspend-min-microvolt = <1400000>;
+								regulator-suspend-max-microvolt = <1400000>;
 								regulator-changeable-in-suspend;
-								regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
+								regulator-mode = <ACT8945A_REGULATOR_MODE_LOWPOWER>;
 							};
 						};
 
@@ -346,7 +349,7 @@
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 				atmel,wakeup-rtc-timer;
 
 				input@0 {
@@ -618,10 +621,9 @@
 						bias-disable;
 					};
 
-					ck_cd_rstn_vddsel {
+					ck_cd_rstn {
 						pinmux = <PIN_PA0__SDMMC0_CK>,
 							 <PIN_PA10__SDMMC0_RSTN>,
-							 <PIN_PA11__SDMMC0_VDDSEL>,
 							 <PIN_PA13__SDMMC0_CD>;
 						bias-disable;
 					};
@@ -703,16 +705,16 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio_default>;
 
-		bp1 {
+		button {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
@@ -723,18 +725,18 @@
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
 		status = "okay"; /* conflict with pwm0 */
 
-		red {
+		led-red {
 			label = "red";
 			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
 		};
 
 
-		green {
+		led-green {
 			label = "green";
 			gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
 		};
 
-		blue {
+		led-blue {
 			label = "blue";
 			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/at91-sama5d3_eds.dts b/arch/arm/boot/dts/at91-sama5d3_eds.dts
new file mode 100644
index 000000000000..c287b03d768b
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d3_eds.dts
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * at91-sama5d3_eds.dts - Device Tree file for the SAMA5D3 Ethernet
+ *    Development System board.
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Jerry Ray <jerry.ray@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "SAMA5D3 Ethernet Development System";
+	compatible = "microchip,sama5d3-eds", "atmel,sama5d36",
+		     "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		button-3 {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	vcc_3v3_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vcc_2v5_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+
+	vcc_1v8_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+
+	vcc_1v2_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	vcc_mmc0_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc0-card-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nand_controller: nand-controller {
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x2>;
+			atmel,rb = <0>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				bootloader@40000 {
+					label = "bootloader";
+					reg = <0x40000 0xc0000>;
+				};
+
+				bootloaderenvred@100000 {
+					label = "bootloader env redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				bootloaderenv@140000 {
+					label = "bootloader env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x0f800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_pu>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&pinctrl_i2c2_pu>;
+	status = "okay";
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+	vmmc-supply = <&vcc_mmc0_reg>;
+	vqmmc-supply = <&vcc_3v3_reg>;
+	status = "okay";
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_i2c0_pu: i2c0-pu {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_i2c2_pu: i2c2-pu {
+			atmel,pins =
+				<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_key_gpio: key-gpio-0 {
+			atmel,pins =
+				<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_cd: mmc0-cd {
+			atmel,pins =
+				<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		/* Reserved for reset signal to the RGMII connector. */
+		pinctrl_rgmii_rstn: rgmii-rstn {
+			atmel,pins =
+				<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		/* Reserved for an interrupt line from the RMII and RGMII connectors. */
+		pinctrl_spi_irqn: spi-irqn {
+			atmel,pins =
+				<AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_spi0_cs: spi0-cs-default {
+			atmel,pins =
+				<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_cs: spi1-cs-default {
+			atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins =
+				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_usb_default: usb-default {
+			atmel,pins =
+				<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		/* Reserved for VBUS fault interrupt. */
+		pinctrl_vbusfault_irqn: vbusfault-irqn {
+			atmel,pins =
+				<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_vcc_mmc0_reg_gpio: vcc-mmc0-reg-gpio-default {
+			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spi0 {
+	pinctrl-names = "default", "cs";
+	pinctrl-1 = <&pinctrl_spi0_cs>;
+	cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default", "cs";
+	pinctrl-1 = <&pinctrl_spi1_cs>;
+	cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioC 28 0>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {	/* USB Device port with VBUS detection. */
+	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {	/* 3-port Host. First port is unused. */
+	atmel,vbus-gpio = <0
+			   &pioE 3 GPIO_ACTIVE_HIGH
+			   &pioE 4 GPIO_ACTIVE_HIGH
+			  >;
+	num-ports = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts b/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts
new file mode 100644
index 000000000000..14af1fd6d247
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "EVB-KSZ9477";
+	compatible = "microchip,sama5d3-ksz9477-evb", "atmel,sama5d36",
+		     "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mcc0_vcc>;
+		regulator-name = "mmc0-vcc";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_pu>;
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+		disable-wp;
+		vmmc-supply = <&reg_vcc_mmc0>;
+		vqmmc-supply = <&reg_3v3>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spi0 {
+	cs-gpios = <&pioD 13 GPIO_ACTIVE_LOW>, <0>, <0>,
+		   <&pioD 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&pinctrl_spi_ksz>;
+	cs-gpios = <&pioC 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	switch@0 {
+		compatible = "microchip,ksz9477";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpha;
+		spi-cpol;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+				phy-mode = "internal";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-mode = "internal";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy-mode = "internal";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-mode = "internal";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan5";
+				phy-mode = "internal";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&macb0>;
+				phy-mode = "rgmii-txid";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_i2c0_pu: i2c0-pu {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_mmc0_cd: mmc0-cd {
+			atmel,pins = <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_mcc0_vcc: mmc0-vcc {
+			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi_ksz: spi-ksz {
+			atmel,pins =
+				<
+				/* SPI1_MISO */
+				AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				/* SPI1_MOSI */
+				AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE
+				/* SPI1_SPCK */
+				AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE
+
+				/* SPI CS */
+				AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				/* switch IRQ */
+				AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH
+				/* switch PME_N, SoC IN */
+				AT91_PIOC 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+				/* switch RST */
+				AT91_PIOC 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH
+				>;
+		};
+
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins =
+				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 5179258f9247..820033727088 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "sama5d36.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "SAMA5D3 Xplained";
@@ -56,6 +57,8 @@
 			};
 
 			spi0: spi@f0004000 {
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi0_cs>;
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
@@ -168,6 +171,8 @@
 			};
 
 			spi1: spi@f8008000 {
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
@@ -247,6 +252,26 @@
 							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
 							 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 					};
+
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi0_cs: spi0_cs_default {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default {
+						atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 			};
 		};
@@ -338,6 +363,8 @@
 
 	vcc_mmc0_reg: fixedregulator_mmc0 {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
 		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
 		regulator-name = "mmc0-card-supply";
 		regulator-min-microvolt = <3300000>;
@@ -345,31 +372,34 @@
 		regulator-always-on;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio>;
 
-		bp3 {
+		button {
 			label = "PB_USER";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay";
 
-		d2 {
+		led-d2 {
 			label = "d2";
 			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
 			linux,default-trigger = "heartbeat";
 		};
 
-		d3 {
-			label = "d3";
+		led-d3 {
+			label = "d3"; /* Conflict with EBI CS0, USART2 CTS. */
 			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
index 710cb72bda5a..fd1086f52b40 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
@@ -49,7 +49,7 @@
 				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
 				status = "okay";
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
index 4d7cee569ff2..8adf567f2f0f 100644
--- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
@@ -115,19 +115,19 @@
 		compatible = "gpio-leds";
 		status = "okay";
 
-		user1 {
+		led-user1 {
 			label = "user1";
 			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		user2 {
+		led-user2 {
 			label = "user2";
 			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		user3 {
+		led-user3 {
 			label = "user3";
 			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 0b3ad1b580b8..95d701d13fef 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "sama5d4.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel SAMA5D4 Xplained";
@@ -38,16 +39,6 @@
 				status = "okay";
 			};
 
-			spi0: spi@f8010000 {
-				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
-				status = "okay";
-				m25p80@0 {
-					compatible = "atmel,at25df321a";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
 			i2c0: i2c@f8014000 {
 				i2c-digital-filter;
 				status = "okay";
@@ -90,6 +81,8 @@
 			};
 
 			spi1: spi@fc018000 {
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioB 21 0>;
 				status = "okay";
 			};
@@ -147,6 +140,19 @@
 						atmel,pins =
 							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_vcc_mmc1_reg: vcc_mmc1_reg {
+						atmel,pins =
+							<AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 			};
 		};
@@ -236,31 +242,33 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio>;
 
-		pb_user1 {
+		button {
 			label = "pb_user1";
 			gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x100>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay";
 
-		d8 {
+		led-d8 {
 			label = "d8";
 			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		d10 {
+		led-d10 {
 			label = "d10";
 			gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
@@ -278,6 +286,8 @@
 
 	vcc_mmc1_reg: fixedregulator_mmc1 {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc1_reg>;
 		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
 		regulator-name = "VDD MCI1";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index fe432b6b7e95..20ac775059ca 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -65,7 +65,7 @@
 			spi0: spi@f8010000 {
 				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
 				status = "okay";
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
@@ -269,13 +269,13 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio>;
 
-		pb_user1 {
+		button {
 			label = "pb_user1";
 			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
@@ -287,18 +287,18 @@
 		compatible = "gpio-leds";
 		status = "okay";
 
-		d8 {
+		led-d8 {
 			label = "d8";
 			/* PE28, conflicts with usart4 rts pin */
 			gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
 		};
 
-		d9 {
+		led-d9 {
 			label = "d9";
 			gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		d10 {
+		led-d10 {
 			label = "d10";
 			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
new file mode 100644
index 000000000000..aa5cc0e98bba
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -0,0 +1,834 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board
+ *
+ *  Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries
+ *
+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7g5-pinfunc.h"
+#include "sama7g5.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/sound/microchip,pdmc.h>
+
+/ {
+	model = "Microchip SAMA7G5-EK";
+	compatible = "microchip,sama7g5ek", "microchip,sama7g5", "microchip,sama7";
+
+	chosen {
+		bootargs = "rw root=/dev/mmcblk1p2 rootfstype=ext4 rootwait";
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart3;
+		serial1 = &uart4;
+		serial2 = &uart7;
+		serial3 = &uart0;
+		i2c0 = &i2c1;
+		i2c1 = &i2c8;
+		i2c2 = &i2c9;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* Conflict with pwm. */
+
+		red_led {
+			label = "red";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+		};
+
+		green_led {
+			label = "green";
+			gpios = <&pioA PIN_PA13 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue_led {
+			label = "blue";
+			gpios = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* 512 M */
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x20000000>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sama7g5ek audio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			cpu {
+				sound-dai = <&spdiftx>;
+			};
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			cpu {
+				sound-dai = <&spdifrx>;
+			};
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&adc {
+	vddana-supply = <&vddout25>;
+	vref-supply = <&vddout25>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "ospi: at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "ospi: bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "ospi: bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "ospi: bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "ospi: device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "ospi: kernel";
+			reg = <0x200000 0x600000>;
+		};
+
+		rootfs@800000 {
+			label = "ospi: rootfs";
+			reg = <0x800000 0x7800000>;
+		};
+
+	};
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart0: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		status = "disabled";
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		mcp16502@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			status = "okay";
+
+			regulators {
+				vdd_3v3: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <3300000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddioddr: VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcore: VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-voltage = <1150000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcpu: VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-ramp-delay = <3125>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-voltage = <1050000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vldo1: LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-voltage = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				vldo2: LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <3700000>;
+
+					regulator-state-standby {
+						regulator-suspend-voltage = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+			};
+		};
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart3: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart4: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "okay";
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx7_default>;
+		status = "okay";
+	};
+};
+
+&flx8 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c8: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+	};
+};
+
+&flx9 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c9: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+	};
+};
+
+&flx11 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi11: spi@400 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
+		status = "okay";
+	};
+};
+
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac0_default
+		     &pinctrl_gmac0_mdio_default
+		     &pinctrl_gmac0_txck_default
+		     &pinctrl_gmac0_phy_irq>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <0x7>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PA31 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gmac1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac1_default
+		     &pinctrl_gmac1_mdio_default
+		     &pinctrl_gmac1_phy_irq>;
+	phy-mode = "rmii";
+	status = "okay"; /* Conflict with pdmc0. */
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PA21 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s0_default>;
+};
+
+&pdmc0 {
+	#sound-dai-cells = <0>;
+	microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */
+			    <MCHP_PDMC_DS1 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 2 */
+			    <MCHP_PDMC_DS0 MCHP_PDMC_CLK_POSITIVE>, /* MIC 3 */
+			    <MCHP_PDMC_DS1 MCHP_PDMC_CLK_POSITIVE>; /* MIC 4 */
+	status = "disabled"; /* Conflict with gmac1. */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdmc0_default>;
+};
+
+&pioA {
+
+	pinctrl_can0_default: can0_default {
+		pinmux = <PIN_PD12__CANTX0>,
+			 <PIN_PD13__CANRX0 >;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1_default {
+		pinmux = <PIN_PD14__CANTX1>,
+			 <PIN_PD15__CANRX1 >;
+		bias-disable;
+	};
+
+	pinctrl_flx0_default: flx0_default {
+		pinmux = <PIN_PE3__FLEXCOM0_IO0>,
+			 <PIN_PE4__FLEXCOM0_IO1>,
+			 <PIN_PE6__FLEXCOM0_IO3>,
+			 <PIN_PE7__FLEXCOM0_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_flx3_default: flx3_default {
+		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
+			 <PIN_PD17__FLEXCOM3_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx4_default: flx4_default {
+		pinmux = <PIN_PD18__FLEXCOM4_IO0>,
+			 <PIN_PD19__FLEXCOM4_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_flx7_default: flx7_default {
+		pinmux = <PIN_PC23__FLEXCOM7_IO0>,
+			 <PIN_PC24__FLEXCOM7_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_default: gmac0_default {
+		pinmux = <PIN_PA16__G0_TX0>,
+			 <PIN_PA17__G0_TX1>,
+			 <PIN_PA26__G0_TX2>,
+			 <PIN_PA27__G0_TX3>,
+			 <PIN_PA19__G0_RX0>,
+			 <PIN_PA20__G0_RX1>,
+			 <PIN_PA28__G0_RX2>,
+			 <PIN_PA29__G0_RX3>,
+			 <PIN_PA15__G0_TXEN>,
+			 <PIN_PA30__G0_RXCK>,
+			 <PIN_PA18__G0_RXDV>,
+			 <PIN_PA25__G0_125CK>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_mdio_default: gmac0_mdio_default {
+		pinmux = <PIN_PA22__G0_MDC>,
+			 <PIN_PA23__G0_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_txck_default: gmac0_txck_default {
+		pinmux = <PIN_PA24__G0_TXCK>;
+		slew-rate = <0>;
+		bias-pull-up;
+	};
+
+	pinctrl_gmac0_phy_irq: gmac0_phy_irq {
+		pinmux = <PIN_PA31__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_default: gmac1_default {
+		pinmux = <PIN_PD30__G1_TXCK>,
+			 <PIN_PD22__G1_TX0>,
+			 <PIN_PD23__G1_TX1>,
+			 <PIN_PD21__G1_TXEN>,
+			 <PIN_PD25__G1_RX0>,
+			 <PIN_PD26__G1_RX1>,
+			 <PIN_PD27__G1_RXER>,
+			 <PIN_PD24__G1_RXDV>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_mdio_default: gmac1_mdio_default {
+		pinmux = <PIN_PD28__G1_MDC>,
+			 <PIN_PD29__G1_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_phy_irq: gmac1_phy_irq {
+		pinmux = <PIN_PA21__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PC9__FLEXCOM1_IO0>,
+			 <PIN_PC10__FLEXCOM1_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		pinmux = <PIN_PC14__FLEXCOM8_IO0>,
+			 <PIN_PC13__FLEXCOM8_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		pinmux = <PIN_PC18__FLEXCOM9_IO0>,
+			 <PIN_PC19__FLEXCOM9_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2s0_default: i2s0_default {
+		pinmux = <PIN_PB23__I2SMCC0_CK>,
+			 <PIN_PB24__I2SMCC0_WS>,
+			 <PIN_PB25__I2SMCC0_DOUT1>,
+			 <PIN_PB26__I2SMCC0_DOUT0>,
+			 <PIN_PB27__I2SMCC0_MCK>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PA12__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA13__GPIO>,
+			 <PIN_PB8__GPIO>,
+			 <PIN_PD20__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_an_default: mikrobus1_an_default {
+		pinmux = <PIN_PD0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an_default: mikrobus2_an_default {
+		pinmux = <PIN_PD1__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_pwm2_default: mikrobus1_pwm2_default {
+		pinmux = <PIN_PA13__PWMH2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm3_default: mikrobus2_pwm3_default {
+		pinmux = <PIN_PD20__PWMH3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+		pinmux = <PIN_PB6__FLEXCOM11_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi: mikrobus1_spi {
+		pinmux = <PIN_PB3__FLEXCOM11_IO0>,
+			 <PIN_PB4__FLEXCOM11_IO1>,
+			 <PIN_PB5__FLEXCOM11_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_pdmc0_default: pdmc0_default {
+		pinmux = <PIN_PD23__PDMC0_DS0>,
+			 <PIN_PD24__PDMC0_DS1>,
+			 <PIN_PD22__PDMC0_CLK>;
+		bias_disable;
+	};
+
+	pinctrl_qspi: qspi {
+		pinmux = <PIN_PB12__QSPI0_IO0>,
+			 <PIN_PB11__QSPI0_IO1>,
+			 <PIN_PB10__QSPI0_IO2>,
+			 <PIN_PB9__QSPI0_IO3>,
+			 <PIN_PB16__QSPI0_IO4>,
+			 <PIN_PB17__QSPI0_IO5>,
+			 <PIN_PB18__QSPI0_IO6>,
+			 <PIN_PB19__QSPI0_IO7>,
+			 <PIN_PB13__QSPI0_CS>,
+			 <PIN_PB14__QSPI0_SCK>,
+			 <PIN_PB15__QSPI0_SCKN>,
+			 <PIN_PB20__QSPI0_DQS>,
+			 <PIN_PB21__QSPI0_INT>;
+		bias-disable;
+		slew-rate = <0>;
+		atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA3__SDMMC0_DAT0>,
+				 <PIN_PA4__SDMMC0_DAT1>,
+				 <PIN_PA5__SDMMC0_DAT2>,
+				 <PIN_PA6__SDMMC0_DAT3>,
+				 <PIN_PA7__SDMMC0_DAT4>,
+				 <PIN_PA8__SDMMC0_DAT5>,
+				 <PIN_PA9__SDMMC0_DAT6>,
+				 <PIN_PA10__SDMMC0_DAT7>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck_cd_rstn_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA2__SDMMC0_RSTN>,
+				 <PIN_PA11__SDMMC0_DS>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd_data {
+			pinmux = <PIN_PB29__SDMMC1_CMD>,
+				 <PIN_PB31__SDMMC1_DAT0>,
+				 <PIN_PC0__SDMMC1_DAT1>,
+				 <PIN_PC1__SDMMC1_DAT2>,
+				 <PIN_PC2__SDMMC1_DAT3>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck_cd_rstn_vddsel {
+			pinmux = <PIN_PB30__SDMMC1_CK>,
+				 <PIN_PB28__SDMMC1_RSTN>,
+				 <PIN_PC5__SDMMC1_1V8SEL>,
+				 <PIN_PC4__SDMMC1_CD>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_sdmmc2_default: sdmmc2_default {
+		cmd_data {
+			pinmux = <PIN_PD3__SDMMC2_CMD>,
+				 <PIN_PD5__SDMMC2_DAT0>,
+				 <PIN_PD6__SDMMC2_DAT1>,
+				 <PIN_PD7__SDMMC2_DAT2>,
+				 <PIN_PD8__SDMMC2_DAT3>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck {
+			pinmux = <PIN_PD4__SDMMC2_CK>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_spdifrx_default: spdifrx_default {
+		pinmux = <PIN_PB0__SPDIF_RX>;
+		bias-disable;
+	};
+
+	pinctrl_spdiftx_default: spdiftx_default {
+		pinmux = <PIN_PB1__SPDIF_TX>;
+		bias-disable;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_pwm2_default &pinctrl_mikrobus2_pwm3_default>;
+	status = "disabled"; /* Conflict with leds. */
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+	bus-width = <8>;
+	non-removable;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vldo1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc2_default>;
+};
+
+&shdwc {
+	atmel,shdwc-debouncer = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&spdifrx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdifrx_default>;
+	status = "okay";
+};
+
+&spdiftx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdiftx_default>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&vddout25 {
+	vin-supply = <&vdd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
index 3ca97b47c69c..b99a4fb44a36 100644
--- a/arch/arm/boot/dts/at91-tse850-3.dts
+++ b/arch/arm/boot/dts/at91-tse850-3.dts
@@ -106,35 +106,35 @@
 	leds {
 		compatible = "gpio-leds";
 
-		ch1-red {
+		led-ch1-red {
 			label = "ch-1:red";
 			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
 		};
-		ch1-green {
+		led-ch1-green {
 			label = "ch-1:green";
 			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
 		};
-		ch2-red {
+		led-ch2-red {
 			label = "ch-2:red";
 			gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
 		};
-		ch2-green {
+		led-ch2-green {
 			label = "ch-2:green";
 			gpios = <&pioA 20 GPIO_ACTIVE_LOW>;
 		};
-		data-red {
+		led-data-red {
 			label = "data:red";
 			gpios = <&pioA 19 GPIO_ACTIVE_LOW>;
 		};
-		data-green {
+		led-data-green {
 			label = "data:green";
 			gpios = <&pioA 18 GPIO_ACTIVE_LOW>;
 		};
-		alarm-red {
+		led-alarm-red {
 			label = "alarm:red";
 			gpios = <&pioA 17 GPIO_ACTIVE_LOW>;
 		};
-		alarm-green {
+		led-alarm-green {
 			label = "alarm:green";
 			gpios = <&pioA 16 GPIO_ACTIVE_LOW>;
 		};
@@ -262,7 +262,7 @@
 &macb1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rmii";
 
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
index a51a3372afa1..ebeaa6ab500e 100644
--- a/arch/arm/boot/dts/at91-vinco.dts
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -59,7 +59,7 @@
 			spi0: spi@f8010000 {
 				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
 				status = "okay";
-				m25p80@0 {
+				flash@0 {
 					compatible = "n25q32b", "jedec,spi-nor";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
index 54d130c92185..ef73f727f7bd 100644
--- a/arch/arm/boot/dts/at91-wb45n.dts
+++ b/arch/arm/boot/dts/at91-wb45n.dts
@@ -12,13 +12,10 @@
 	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
 	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		irqbtn@18 {
-			reg = <18>;
+		button {
 			label = "IRQBTN";
 			linux,code = <99>;
 			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
index a5e45bb95c04..ec2becf6133b 100644
--- a/arch/arm/boot/dts/at91-wb50n.dts
+++ b/arch/arm/boot/dts/at91-wb50n.dts
@@ -13,21 +13,17 @@
 	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
 	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		btn0@10 {
-			reg = <10>;
+		button-0 {
 			label = "BTNESC";
 			linux,code = <1>; /* ESC button */
 			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 		};
 
-		irqbtn@31 {
-			reg = <31>;
+		button-1 {
 			label = "IRQBTN";
 			linux,code = <99>; /* SysReq button */
 			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
@@ -90,12 +86,6 @@
 
 &spi1 {
 	status = "okay";
-
-	spidev@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <8000000>;
-	};
 };
 
 &usb0 {
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index d1181ead18e5..6f9004ebf424 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -596,6 +597,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -607,6 +609,7 @@
 			usart0: serial@fffc0000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -620,6 +623,7 @@
 			usart1: serial@fffc4000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -633,6 +637,7 @@
 			usart2: serial@fffc8000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -646,6 +651,7 @@
 			usart3: serial@fffcc000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffcc000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -660,7 +666,7 @@
 				compatible = "atmel,at91rm9200-udc";
 				reg = <0xfffb0000 0x4000>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 1>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index e1ef4e44e663..4624a6f076f8 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -73,7 +73,7 @@
 			spi0: spi@fffe0000 {
 				status = "okay";
 				cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <15000000>;
 					reg = <0>;
@@ -94,7 +94,7 @@
 			status = "okay";
 		};
 
-		nor_flash@10000000 {
+		flash@10000000 {
 			compatible = "cfi-flash";
 			reg = <0x10000000 0x800000>;
 			linux,mtd-name = "physmap-flash.0";
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 019f1c3d4d30..789fe356dbf6 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -123,7 +124,7 @@
 				clock-names = "slow_xtal", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
@@ -166,7 +167,7 @@
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
-			pinctrl@fffff400 {
+			pinctrl: pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
@@ -532,6 +533,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -543,6 +545,7 @@
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -556,6 +559,7 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -569,6 +573,7 @@
 			usart2: serial@fffb8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -582,6 +587,7 @@
 			usart3: serial@fffd0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -595,6 +601,7 @@
 			uart0: serial@fffd4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -608,6 +615,7 @@
 			uart1: serial@fffd8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
index d3446e42b598..bb72f050a4fe 100644
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "at91sam9260.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel at91sam9260ek";
@@ -91,7 +92,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@1 {
+				flash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;
@@ -143,20 +144,20 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		btn3 {
+		button-3 {
 			label = "Button 3";
 			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
 			wakeup-source;
 		};
 
-		btn4 {
+		button-4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index 7adc36ca8a46..ee0bd1aceb3f 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -179,6 +180,7 @@
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -192,6 +194,7 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -205,6 +208,7 @@
 			usart2: serial@fffb8000{
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -301,6 +305,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -603,7 +608,7 @@
 				clock-names = "slow_xtal", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&slow_xtal>;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index beed819609e8..88869ca874d1 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -145,7 +145,7 @@
 				cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
 				status = "okay";
 
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					reg = <0>;
 					spi-max-frequency = <15000000>;
@@ -178,6 +178,10 @@
 				status = "okay";
 			};
 
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
 			watchdog@fffffd40 {
 				status = "okay";
 			};
@@ -207,31 +211,31 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		button_0 {
+		button-0 {
 			label = "button_0";
 			gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
 			linux,code = <256>;
 			wakeup-source;
 		};
 
-		button_1 {
+		button-1 {
 			label = "button_1";
 			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
 			linux,code = <257>;
 			wakeup-source;
 		};
 
-		button_2 {
+		button-2 {
 			label = "button_2";
 			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
 			linux,code = <258>;
 			wakeup-source;
 		};
 
-		button_3 {
+		button-3 {
 			label = "button_3";
 			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
 			linux,code = <259>;
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index fe45d96239c9..3ce9ea987312 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -151,7 +152,7 @@
 				clock-names = "t0_clk", "slow_clk";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&slow_xtal>;
@@ -540,6 +541,7 @@
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -551,6 +553,7 @@
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -564,6 +567,7 @@
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -577,6 +581,7 @@
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 71f60576761a..ce8baff6a9f4 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -95,13 +95,17 @@
 			spi0: spi@fffa4000 {
 				status = "okay";
 				cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
 				};
 			};
 
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
 			watchdog@fffffd40 {
 				status = "okay";
 			};
@@ -228,17 +232,17 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		left_click {
+		button-left-click {
 			label = "left_click";
 			gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
 			wakeup-source;
 		};
 
-		right_click {
+		button-right-click {
 			label = "right_click";
 			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 6e6e672c0b86..024af2db638e 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -5,6 +5,7 @@
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
 #include "at91sam9g20.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 
@@ -38,6 +39,13 @@
 
 				};
 
+				usb1 {
+					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
+					};
+				};
+
 				mmc0_slot1 {
 					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
 						atmel,pins =
@@ -83,6 +91,8 @@
 			};
 
 			usb1: gadget@fffa4000 {
+				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+				pinctrl-names = "default";
 				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
@@ -109,7 +119,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@1 {
+				flash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;
@@ -213,28 +223,40 @@
 		24c512@50 {
 			compatible = "atmel,24c512";
 			reg = <0x50>;
+			vcc-supply = <&reg_3v3>;
 		};
 
 		wm8731: wm8731@1b {
 			compatible = "wm8731";
 			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
+
+			HPVDD-supply = <&vcc_dac>;
+			AVDD-supply = <&vcc_dac>;
+			DCVDD-supply = <&reg_3v3>;
+			DBVDD-supply = <&reg_3v3>;
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		btn3 {
+		button-3 {
 			label = "Button 3";
 			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
 			wakeup-source;
 		};
 
-		btn4 {
+		button-4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
@@ -253,4 +275,35 @@
 		atmel,ssc-controller = <&ssc0>;
 		atmel,audio-codec = <&wm8731>;
 	};
+
+	reg_5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_1v: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	vcc_dac: fixedregulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_DAC";
+		vin-supply = <&reg_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
index 7da70aeeb528..92f2c05c873f 100644
--- a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
+++ b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
@@ -23,7 +23,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user_btn1 {
+		button {
 			label = "USER_BTN1";
 			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 2ab730fd6472..95f5d76234db 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -137,7 +138,7 @@
 				clock-names = "slow_clk", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&clk32k>;
@@ -675,6 +676,7 @@
 
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				reg = <0xffffee00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
@@ -687,6 +689,7 @@
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -700,6 +703,7 @@
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -713,6 +717,7 @@
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -726,6 +731,7 @@
 			usart3: serial@fff98000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff98000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index b6256a20fbc7..7f45e81ca165 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -167,7 +167,7 @@
 			spi0: spi@fffa4000{
 				status = "okay";
 				cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <13000000>;
 					reg = <0>;
@@ -343,48 +343,48 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		left_click {
+		button-left-click {
 			label = "left_click";
 			gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
 			wakeup-source;
 		};
 
-		right_click {
+		button-right-click {
 			label = "right_click";
 			gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
 			wakeup-source;
 		};
 
-		left {
+		button-left {
 			label = "Joystick Left";
 			gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
 			linux,code = <105>;
 		};
 
-		right {
+		button-right {
 			label = "Joystick Right";
 			gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
 			linux,code = <106>;
 		};
 
-		up {
+		button-up {
 			label = "Joystick Up";
 			gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
 			linux,code = <103>;
 		};
 
-		down {
+		button-down {
 			label = "Joystick Down";
 			gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
 			linux,code = <108>;
 		};
 
-		enter {
+		button-enter {
 			label = "Joystick Press";
 			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 0785389f5507..83114d26f10d 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -126,7 +127,7 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 			};
 
-			rstc@fffffe00 {
+			reset-controller@fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k>;
@@ -593,6 +594,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -618,6 +620,7 @@
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
@@ -629,6 +632,7 @@
 			usart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
@@ -640,6 +644,7 @@
 			usart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
@@ -651,6 +656,7 @@
 			usart3: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 2bc4e6e0a923..4c644d4c6be7 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -119,7 +119,7 @@
 			spi0: spi@f0000000 {
 				status = "okay";
 				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
@@ -226,10 +226,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		enter {
+		button-enter {
 			label = "Enter";
 			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index 730d1182c73e..364a2ff0a763 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -175,6 +176,7 @@
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -188,6 +190,7 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -201,6 +204,7 @@
 			usart2: serial@fffb8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -214,6 +218,7 @@
 			usart3: serial@fffbc000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffbc000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
@@ -322,6 +327,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -766,7 +772,7 @@
 				clock-names = "slow_clk", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
 				clocks = <&clk32k>;
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index 62981b39c815..a57351270551 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -180,7 +180,7 @@
 			spi0: spi@fffcc000 {
 				status = "okay";
 				cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <15000000>;
 					reg = <0>;
@@ -212,6 +212,10 @@
 				status = "okay";
 			};
 
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
 			rtc@fffffe00 {
 				status = "okay";
 			};
@@ -244,17 +248,17 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		right_click {
+		button-right-click {
 			label = "right_click";
 			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
 			wakeup-source;
 		};
 
-		left_click {
+		button-left-click {
 			label = "left_click";
 			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 395e883644cd..0c26c925761b 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -134,7 +135,7 @@
 				clock-names = "slow_clk", "main_xtal";
 			};
 
-			reset_controller: rstc@fffffe00 {
+			reset_controller: reset-controller@fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k>;
@@ -674,6 +675,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -688,6 +690,7 @@
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
@@ -702,6 +705,7 @@
 			usart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
@@ -716,6 +720,7 @@
 			usart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
@@ -775,6 +780,7 @@
 			uart0: serial@f8040000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8040000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
@@ -786,6 +792,7 @@
 			uart1: serial@f8044000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8044000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
index 098d3fef5c37..a47c765e1b20 100644
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	aliases {
@@ -44,6 +45,7 @@
 			usart3: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index 6d1264de6060..5f4eaa618ab4 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -125,7 +125,7 @@
 	cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
 	status = "disabled"; /* conflicts with mmc1 */
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "atmel,at25df321a";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/axm5516-cpus.dtsi
index 3bcf4e0a3c85..f13ef80b6637 100644
--- a/arch/arm/boot/dts/axm5516-cpus.dtsi
+++ b/arch/arm/boot/dts/axm5516-cpus.dtsi
@@ -73,7 +73,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x00>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -81,7 +81,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x01>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -89,7 +89,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x02>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -97,7 +97,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x03>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -105,7 +105,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x100>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -113,7 +113,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x101>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -121,7 +121,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x102>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -129,7 +129,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x103>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -137,7 +137,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x200>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -145,7 +145,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x201>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -153,7 +153,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x202>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -161,7 +161,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x203>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -169,7 +169,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x300>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -177,7 +177,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x301>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -185,7 +185,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x302>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -193,7 +193,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x303>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 	};
diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi
index 7676a65059a4..5277890cfad2 100644
--- a/arch/arm/boot/dts/axm55xx.dtsi
+++ b/arch/arm/boot/dts/axm55xx.dtsi
@@ -108,7 +108,7 @@
 			#size-cells = <2>;
 			ranges;
 
-			serial0: uart@2010080000 {
+			serial0: serial@2010080000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10080000 0 0x1000>;
 				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -117,7 +117,7 @@
 				status = "disabled";
 			};
 
-			serial1: uart@2010081000 {
+			serial1: serial@2010081000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10081000 0 0x1000>;
 				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -126,7 +126,7 @@
 				status = "disabled";
 			};
 
-			serial2: uart@2010082000 {
+			serial2: serial@2010082000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10082000 0 0x1000>;
 				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -135,7 +135,7 @@
 				status = "disabled";
 			};
 
-			serial3: uart@2010083000 {
+			serial3: serial@2010083000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10083000 0 0x1000>;
 				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
index 0d9ff12bdf28..ca240cd6f6c3 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/axp209.dtsi
@@ -53,7 +53,7 @@
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
-	ac_power_supply: ac-power-supply {
+	ac_power_supply: ac-power {
 		compatible = "x-powers,axp202-ac-power-supply";
 		status = "disabled";
 	};
@@ -69,7 +69,7 @@
 		#gpio-cells = <2>;
 	};
 
-	battery_power_supply: battery-power-supply {
+	battery_power_supply: battery-power {
 		compatible = "x-powers,axp209-battery-power-supply";
 		status = "disabled";
 	};
@@ -112,7 +112,7 @@
 		};
 	};
 
-	usb_power_supply: usb-power-supply {
+	usb_power_supply: usb-power {
 		compatible = "x-powers,axp202-usb-power-supply";
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi
index 65a07a67aca9..f79650afd0a7 100644
--- a/arch/arm/boot/dts/axp22x.dtsi
+++ b/arch/arm/boot/dts/axp22x.dtsi
@@ -52,7 +52,7 @@
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
-	ac_power_supply: ac-power-supply {
+	ac_power_supply: ac-power {
 		compatible = "x-powers,axp221-ac-power-supply";
 		status = "disabled";
 	};
@@ -62,11 +62,17 @@
 		#io-channel-cells = <1>;
 	};
 
-	battery_power_supply: battery-power-supply {
+	battery_power_supply: battery-power {
 		compatible = "x-powers,axp221-battery-power-supply";
 		status = "disabled";
 	};
 
+	axp_gpio: gpio {
+		compatible = "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <3000>;
@@ -163,7 +169,7 @@
 		};
 	};
 
-	usb_power_supply: usb_power_supply {
+	usb_power_supply: usb-power {
 		compatible = "x-powers,axp221-usb-power-supply";
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/axp809.dtsi b/arch/arm/boot/dts/axp809.dtsi
index ab8e5f2d9246..d134d4c00bd8 100644
--- a/arch/arm/boot/dts/axp809.dtsi
+++ b/arch/arm/boot/dts/axp809.dtsi
@@ -50,4 +50,11 @@
 	compatible = "x-powers,axp809";
 	interrupt-controller;
 	#interrupt-cells = <1>;
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp809-gpio",
+			     "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi
index 1dfeeceabf4c..ebaf1c3ce8db 100644
--- a/arch/arm/boot/dts/axp81x.dtsi
+++ b/arch/arm/boot/dts/axp81x.dtsi
@@ -48,7 +48,7 @@
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
-	ac_power_supply: ac-power-supply {
+	ac_power_supply: ac-power {
 		compatible = "x-powers,axp813-ac-power-supply";
 		status = "disabled";
 	};
@@ -62,19 +62,9 @@
 		compatible = "x-powers,axp813-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
-
-		gpio0_ldo: gpio0-ldo {
-			pins = "GPIO0";
-			function = "ldo";
-		};
-
-		gpio1_ldo: gpio1-ldo {
-			pins = "GPIO1";
-			function = "ldo";
-		};
 	};
 
-	battery_power_supply: battery-power-supply {
+	battery_power_supply: battery-power {
 		compatible = "x-powers,axp813-battery-power-supply";
 		status = "disabled";
 	};
@@ -144,15 +134,11 @@
 		};
 
 		reg_ldo_io0: ldo-io0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_ldo>;
 			/* Disable by default to avoid conflicts with GPIO */
 			status = "disabled";
 		};
 
 		reg_ldo_io1: ldo-io1 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio1_ldo>;
 			/* Disable by default to avoid conflicts with GPIO */
 			status = "disabled";
 		};
@@ -172,7 +158,7 @@
 		};
 	};
 
-	usb_power_supply: usb-power-supply {
+	usb_power_supply: usb-power {
 		compatible = "x-powers,axp813-usb-power-supply";
 	};
 };
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 0025c88f660c..f9f79ed82518 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -112,18 +112,18 @@
 			status = "disabled";
 		};
 
-		pcie_phy: phy@301d0a0 {
+		pcie_phy: pcie_phy@301d0a0 {
 			compatible = "brcm,cygnus-pcie-phy";
 			reg = <0x0301d0a0 0x14>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			pcie0_phy: phy@0 {
+			pcie0_phy: pcie-phy@0 {
 				reg = <0>;
 				#phy-cells = <0>;
 			};
 
-			pcie1_phy: phy@1 {
+			pcie1_phy: pcie-phy@1 {
 				reg = <1>;
 				#phy-cells = <0>;
 			};
@@ -274,8 +274,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
-				  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000>,
+				 <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
 
 			phys = <&pcie0_phy>;
 			phy-names = "pcie-phy";
@@ -283,7 +283,7 @@
 			status = "disabled";
 
 			msi-parent = <&msi0>;
-			msi0: msi-controller {
+			msi0: msi {
 				compatible = "brcm,iproc-msi";
 				msi-controller;
 				interrupt-parent = <&gic>;
@@ -309,8 +309,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
-				  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000>,
+				 <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
 
 			phys = <&pcie1_phy>;
 			phy-names = "pcie-phy";
@@ -318,7 +318,7 @@
 			status = "disabled";
 
 			msi-parent = <&msi1>;
-			msi1: msi-controller {
+			msi1: msi {
 				compatible = "brcm,iproc-msi";
 				msi-controller;
 				interrupt-parent = <&gic>;
@@ -397,8 +397,8 @@
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-0 = <&spi_0>;
-			clocks = <&axi81_clk>;
-			clock-names = "apb_pclk";
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -409,8 +409,8 @@
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-0 = <&spi_1>;
-			clocks = <&axi81_clk>;
-			clock-names = "apb_pclk";
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -421,8 +421,8 @@
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-0 = <&spi_2>;
-			clocks = <&axi81_clk>;
-			clock-names = "apb_pclk";
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -460,7 +460,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@18046000 {
+		nand_controller: nand-controller@18046000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
 			      <0x18046f00 0x20>;
diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
index e8df458aad39..33e6ba63a1ee 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -179,7 +179,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x26000 0x600>,
 			      <0x11b408 0x600>,
@@ -318,7 +318,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi0>;
-		msi0: msi-controller {
+		msi0: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -354,7 +354,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi1>;
-		msi1: msi-controller {
+		msi1: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/bcm-nsp-ax.dtsi b/arch/arm/boot/dts/bcm-nsp-ax.dtsi
new file mode 100644
index 000000000000..f2e941dbab10
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-nsp-ax.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom Northstar Plus Ax stepping-specific bindings.
+ * Notable differences from B0+ are the secondary-boot-reg and
+ * lack of DMA coherency.
+ */
+
+&cpu1 {
+	secondary-boot-reg = <0xffff042c>;
+};
+
+&dma {
+	/delete-property/ dma-coherent;
+};
+
+&sdio {
+	/delete-property/ dma-coherent;
+};
+
+&amac0 {
+	/delete-property/ dma-coherent;
+};
+
+&amac1 {
+	/delete-property/ dma-coherent;
+};
+
+&amac2 {
+	/delete-property/ dma-coherent;
+};
+
+&ehci0 {
+	/delete-property/ dma-coherent;
+};
+
+&mailbox {
+	/delete-property/ dma-coherent;
+};
+
+&xhci {
+	/delete-property/ dma-coherent;
+};
+
+&ehci0 {
+	/delete-property/ dma-coherent;
+};
+
+&ohci0 {
+	/delete-property/ dma-coherent;
+};
+
+&i2c0 {
+	/delete-property/ dma-coherent;
+};
+
+&sata {
+	/delete-property/ dma-coherent;
+};
+
+&pcie0 {
+	/delete-property/ dma-coherent;
+};
+
+&pcie1 {
+	/delete-property/ dma-coherent;
+};
+
+&pcie2 {
+	/delete-property/ dma-coherent;
+};
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index b4d2cc70afb1..5b1dc58d40ba 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -77,7 +77,7 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -166,7 +166,7 @@
 		};
 	};
 
-	axi@18000000 {
+	axi: axi@18000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x0011c40c>;
 		#address-cells = <1>;
@@ -219,7 +219,7 @@
 			status = "disabled";
 		};
 
-		sdio: sdhci@21000 {
+		sdio: mmc@21000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x21000 0x100>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
@@ -269,7 +269,7 @@
 			dma-coherent;
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x026000 0x600>,
 			      <0x11b408 0x600>,
@@ -310,6 +310,7 @@
 			num-cs = <2>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		xhci: usb@29000 {
@@ -362,6 +363,42 @@
 			status = "disabled";
 		};
 
+		mdio: mdio@32000 {
+			compatible = "brcm,iproc-mdio";
+			reg = <0x32000 0x8>;
+			#size-cells = <0>;
+			#address-cells = <1>;
+		};
+
+		mdio-mux@32000 {
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
+			reg = <0x32000 0x4>;
+			mux-mask = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mdio-parent-bus = <&mdio>;
+
+			mdio_int: mdio@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb3_phy: usb3-phy@10 {
+					compatible = "brcm,ns-bx-usb3-phy";
+					reg = <0x10>;
+					usb3-dmp-syscon = <&usb3_dmp>;
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+
+			mdio_ext: mdio@200 {
+				reg = <0x200>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		rng: rng@33000 {
 			compatible = "brcm,bcm-nsp-rng";
 			reg = <0x33000 0x14>;
@@ -497,7 +534,7 @@
 			};
 		};
 
-		sata: ahci@41000 {
+		sata: sata@41000 {
 			compatible = "brcm,bcm-nsp-ahci";
 			reg-names = "ahci", "top-ctrl";
 			reg = <0x41000 0x1000>, <0x40020 0x1c>;
@@ -520,13 +557,8 @@
 			};
 		};
 
-		usb3_phy: usb3-phy@104000 {
-			compatible = "brcm,ns-bx-usb3-phy";
-			reg = <0x104000 0x1000>,
-			      <0x032000 0x1000>;
-			reg-names = "dmp", "ccb-mii";
-			#phy-cells = <0>;
-			status = "disabled";
+		usb3_dmp: syscon@104000 {
+			reg = <0x104000 0x1000>;
 		};
 	};
 
@@ -555,7 +587,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi0>;
-		msi0: msi-controller {
+		msi0: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -592,7 +624,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi1>;
-		msi1: msi-controller {
+		msi1: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -629,7 +661,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi2>;
-		msi2: msi-controller {
+		msi2: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 6197e7d80e3b..ba75784d66a9 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2012-2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012-2013 Broadcom Corporation
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -60,7 +50,7 @@
 		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
 	};
 
-	uart@3e000000 {
+	serial@3e000000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e000000 0x1000>;
@@ -70,7 +60,7 @@
 		reg-io-width = <4>;
 	};
 
-	uart@3e001000 {
+	serial@3e001000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e001000 0x1000>;
@@ -80,7 +70,7 @@
 		reg-io-width = <4>;
 	};
 
-	uart@3e002000 {
+	serial@3e002000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e002000 0x1000>;
@@ -90,7 +80,7 @@
 		reg-io-width = <4>;
 	};
 
-	uart@3e003000 {
+	serial@3e003000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e003000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm21664-garnet.dts b/arch/arm/boot/dts/bcm21664-garnet.dts
index be468f4adc37..cd03fa0c2aae 100644
--- a/arch/arm/boot/dts/bcm21664-garnet.dts
+++ b/arch/arm/boot/dts/bcm21664-garnet.dts
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
 
 /dts-v1/;
 
@@ -26,7 +16,7 @@
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
-	uart@3e000000 {
+	serial@3e000000 {
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
index cc58f2b926b9..ed4de031e48e 100644
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -60,7 +50,7 @@
 		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
 	};
 
-	uart@3e000000 {
+	serial@3e000000 {
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e000000 0x118>;
@@ -70,7 +60,7 @@
 		reg-io-width = <4>;
 	};
 
-	uart@3e001000 {
+	serial@3e001000 {
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e001000 0x118>;
@@ -80,7 +70,7 @@
 		reg-io-width = <4>;
 	};
 
-	uart@3e002000 {
+	serial@3e002000 {
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e002000 0x118>;
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 3b4ab947492a..d5f8823230db 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -1,10 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 #include "bcm2711.dtsi"
-#include "bcm2835-rpi.dtsi"
+#include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-peripheral.dtsi"
-
-#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+#include "bcm283x-rpi-wifi-bt.dtsi"
 
 / {
 	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
@@ -15,38 +15,7 @@
 		stdout-path = "serial1:115200n8";
 	};
 
-	/* Will be filled by the bootloader */
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0 0>;
-	};
-
-	aliases {
-		emmc2bus = &emmc2bus;
-		ethernet0 = &genet;
-		pcie0 = &pcie0;
-		blconfig = &blconfig;
-	};
-
-	leds {
-		act {
-			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-	};
-
-	sd_io_1v8_reg: sd_io_1v8_reg {
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
 		compatible = "regulator-gpio";
 		regulator-name = "vdd-sd-io";
 		regulator-min-microvolt = <1800000>;
@@ -55,12 +24,12 @@
 		regulator-always-on;
 		regulator-settling-time-us = <5000>;
 		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		status = "okay";
 	};
 
-	sd_vcc_reg: sd_vcc_reg {
+	sd_vcc_reg: regulator-sd-vcc {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc-sd";
 		regulator-min-microvolt = <3300000>;
@@ -71,6 +40,10 @@
 	};
 };
 
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
 &ddc0 {
 	status = "okay";
 };
@@ -79,31 +52,15 @@
 	status = "okay";
 };
 
-&firmware {
-	firmware_clocks: clocks {
-		compatible = "raspberrypi,firmware-clocks";
-		#clock-cells = <1>;
-	};
-
-	expgpio: gpio {
-		compatible = "raspberrypi,firmware-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names = "BT_ON",
-				  "WL_ON",
-				  "PWR_LED_OFF",
-				  "GLOBAL_RESET",
-				  "VDD_SD_IO_SEL",
-				  "CAM_GPIO",
-				  "SD_PWR_ON",
-				  "";
-		status = "okay";
-	};
-
-	reset: reset {
-		compatible = "raspberrypi,firmware-reset";
-		#reset-cells = <1>;
-	};
+&expgpio {
+	gpio-line-names = "BT_ON",		/*  0 */
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "GLOBAL_RESET",
+			  "VDD_SD_IO_SEL",
+			  "CAM_GPIO",		/*  5 */
+			  "SD_PWR_ON",
+			  "";
 };
 
 &gpio {
@@ -115,86 +72,89 @@
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
-	gpio-line-names = "ID_SDA",
+	gpio-line-names = "ID_SDA",		/*  0 */
 			  "ID_SCL",
 			  "SDA1",
 			  "SCL1",
 			  "GPIO_GCLK",
-			  "GPIO5",
+			  "GPIO5",		/*  5 */
 			  "GPIO6",
 			  "SPI_CE1_N",
 			  "SPI_CE0_N",
 			  "SPI_MISO",
-			  "SPI_MOSI",
+			  "SPI_MOSI",		/* 10 */
 			  "SPI_SCLK",
 			  "GPIO12",
 			  "GPIO13",
 			  /* Serial port */
 			  "TXD1",
-			  "RXD1",
+			  "RXD1",		/* 15 */
 			  "GPIO16",
 			  "GPIO17",
 			  "GPIO18",
 			  "GPIO19",
-			  "GPIO20",
+			  "GPIO20",		/* 20 */
 			  "GPIO21",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
-			  "GPIO25",
+			  "GPIO25",		/* 25 */
 			  "GPIO26",
 			  "GPIO27",
 			  "RGMII_MDIO",
 			  "RGMIO_MDC",
 			  /* Used by BT module */
-			  "CTS0",
+			  "CTS0",		/* 30 */
 			  "RTS0",
 			  "TXD0",
 			  "RXD0",
 			  /* Used by Wifi */
 			  "SD1_CLK",
-			  "SD1_CMD",
+			  "SD1_CMD",		/* 35 */
 			  "SD1_DATA0",
 			  "SD1_DATA1",
 			  "SD1_DATA2",
 			  "SD1_DATA3",
 			  /* Shared with SPI flash */
-			  "PWM0_MISO",
+			  "PWM0_MISO",		/* 40 */
 			  "PWM1_MOSI",
 			  "STATUS_LED_G_CLK",
 			  "SPIFLASH_CE_N",
 			  "SDA0",
-			  "SCL0",
+			  "SCL0",		/* 45 */
 			  "RGMII_RXCLK",
 			  "RGMII_RXCTL",
 			  "RGMII_RXD0",
 			  "RGMII_RXD1",
-			  "RGMII_RXD2",
+			  "RGMII_RXD2",		/* 50 */
 			  "RGMII_RXD3",
 			  "RGMII_TXCLK",
 			  "RGMII_TXCTL",
 			  "RGMII_TXD0",
-			  "RGMII_TXD1",
+			  "RGMII_TXD1",		/* 55 */
 			  "RGMII_TXD2",
 			  "RGMII_TXD3";
 };
 
 &hdmi0 {
-	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
-	clock-names = "hdmi", "bvb", "audio", "cec";
-	wifi-2.4ghz-coexistence;
 	status = "okay";
 };
 
 &hdmi1 {
-	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
-	clock-names = "hdmi", "bvb", "audio", "cec";
-	wifi-2.4ghz-coexistence;
 	status = "okay";
 };
 
-&hvs {
-	clocks = <&firmware_clocks 4>;
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led_pwr: led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
 };
 
 &pixelvalve0 {
@@ -219,39 +179,6 @@
 	status = "okay";
 };
 
-&rmem {
-	/*
-	 * RPi4's co-processor will copy the board's bootloader configuration
-	 * into memory for the OS to consume. It'll also update this node with
-	 * its placement information.
-	 */
-	blconfig: nvram@0 {
-		compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x0 0x0 0x0>;
-		no-map;
-		status = "disabled";
-	};
-};
-
-/* SDHCI is used to control the SDIO for wireless */
-&sdhci {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
-	bus-width = <4>;
-	non-removable;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
 /* EMMC2 is used to drive the SD card */
 &emmc2 {
 	vqmmc-supply = <&sd_io_1v8_reg>;
@@ -274,15 +201,16 @@
 };
 
 &pcie0 {
-	pci@1,0 {
+	pci@0,0 {
+		device_type = "pci";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges;
 
 		reg = <0 0 0 0 0>;
 
-		usb@1,0 {
-			reg = <0x10000 0 0 0 0>;
+		usb@0,0 {
+			reg = <0 0 0 0 0>;
 			resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
 		};
 	};
@@ -293,13 +221,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
 	uart-has-rtscts;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <2000000>;
-		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-	};
 };
 
 /* uart1 is mapped to the pin header */
@@ -309,10 +230,6 @@
 	status = "okay";
 };
 
-&vchiq {
-	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-};
-
 &vc4 {
 	status = "okay";
 };
@@ -320,3 +237,7 @@
 &vec {
 	status = "disabled";
 };
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-400.dts b/arch/arm/boot/dts/bcm2711-rpi-400.dts
new file mode 100644
index 000000000000..1ab8184302db
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711-rpi-4-b.dts"
+
+/ {
+	compatible = "raspberrypi,400", "brcm,bcm2711";
+	model = "Raspberry Pi 400";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "GLOBAL_RESET",
+			  "VDD_SD_IO_SEL",
+			  "GLOBAL_SHUTDOWN",
+			  "SD_PWR_ON",
+			  "SHUTDOWN_REQUEST";
+};
+
+&genet_mdio {
+	clock-frequency = <1950000>;
+};
+
+&led_pwr {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	/delete-node/ led_act;
+};
+
+&pm {
+	/delete-property/ system-power-controller;
+};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts
new file mode 100644
index 000000000000..d7ba02f586d3
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711-rpi-cm4.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	model = "Raspberry Pi Compute Module 4 IO Board";
+};
+
+&ddc0 {
+	status = "okay";
+};
+
+&ddc1 {
+	status = "okay";
+};
+
+&gpio {
+	/*
+	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "RGMII_MDIO",
+			  "RGMIO_MDC",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  /* Shared with SPI flash */
+			  "PWM0_MISO",
+			  "PWM1_MOSI",
+			  "STATUS_LED_G_CLK",
+			  "SPIFLASH_CE_N",
+			  "SDA0",
+			  "SCL0",
+			  "RGMII_RXCLK",
+			  "RGMII_RXCTL",
+			  "RGMII_RXD0",
+			  "RGMII_RXD1",
+			  "RGMII_RXD2",
+			  "RGMII_RXD3",
+			  "RGMII_TXCLK",
+			  "RGMII_TXCTL",
+			  "RGMII_TXD0",
+			  "RGMII_TXD1",
+			  "RGMII_TXD2",
+			  "RGMII_TXD3";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&genet {
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pixelvalve0 {
+	status = "okay";
+};
+
+&pixelvalve1 {
+	status = "okay";
+};
+
+&pixelvalve2 {
+	status = "okay";
+};
+
+&pixelvalve4 {
+	status = "okay";
+};
+
+&vc4 {
+	status = "okay";
+};
+
+&vec {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi
new file mode 100644
index 000000000000..48e63ab7848c
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711.dtsi"
+#include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,4-compute-module", "brcm,bcm2711";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		status = "okay";
+	};
+
+	sd_vcc_reg: regulator-sd-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+/* EMMC2 is used to drive the eMMC */
+&emmc2 {
+	bus-width = <8>;
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
+	broken-cd;
+	/* Even the IP block is limited to 100 MHz
+	 * this provides a throughput gain
+	 */
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "ANT1",
+			  "VDD_SD_IO_SEL",
+			  "CAM_GPIO",
+			  "SD_PWR_ON",
+			  "ANT2";
+
+	ant1: ant1-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>;
+		/* internal antenna enabled */
+		output-high;
+		line-name = "ant1";
+	};
+
+	ant2: ant2-hog {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_HIGH>;
+		/* external antenna disabled */
+		output-low;
+		line-name = "ant2";
+	};
+};
+
+&genet {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+&genet_mdio {
+	phy1: ethernet-phy@0 {
+		/* No PHY interrupt */
+		reg = <0x0>;
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
+	uart-has-rtscts;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
new file mode 100644
index 000000000000..98817a6675b9
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm2835-rpi.dtsi"
+
+#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0>;
+	};
+
+	aliases {
+		emmc2bus = &emmc2bus;
+		ethernet0 = &genet;
+		pcie0 = &pcie0;
+		blconfig = &blconfig;
+	};
+};
+
+&firmware {
+	firmware_clocks: clocks {
+		compatible = "raspberrypi,firmware-clocks";
+		#clock-cells = <1>;
+	};
+
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "okay";
+	};
+
+	reset: reset {
+		compatible = "raspberrypi,firmware-reset";
+		#reset-cells = <1>;
+	};
+};
+
+&hdmi0 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+	wifi-2.4ghz-coexistence;
+};
+
+&hdmi1 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+	wifi-2.4ghz-coexistence;
+};
+
+&hvs {
+	clocks = <&firmware_clocks 4>;
+};
+
+&rmem {
+	/*
+	 * RPi4's co-processor will copy the board's bootloader configuration
+	 * into memory for the OS to consume. It'll also update this node with
+	 * its placement information.
+	 */
+	blconfig: nvram@0 {
+		compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x0>;
+		no-map;
+		status = "disabled";
+	};
+};
+
+&v3d {
+	clocks = <&firmware_clocks 5>;
+};
+
+&vchiq {
+	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 462b1dfb0385..097e9f252235 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -48,7 +48,7 @@
 		 * This node is the provider for the enable-method for
 		 * bringing up secondary cores.
 		 */
-		local_intc: local_intc@40000000 {
+		local_intc: interrupt-controller@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 		};
@@ -107,12 +107,13 @@
 		};
 
 		pm: watchdog@7e100000 {
-			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+			compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt";
 			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x7e100000 0x114>,
 			      <0x7e00a000 0x24>,
 			      <0x7ec11000 0x20>;
+			reg-names = "pm", "asb", "rpivid_asb";
 			clocks = <&clocks BCM2835_CLOCK_V3D>,
 				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
 				 <&clocks BCM2835_CLOCK_H264>,
@@ -290,6 +291,7 @@
 
 		hvs: hvs@7e400000 {
 			compatible = "brcm,bcm2711-hvs";
+			reg = <0x7e400000 0x8000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -300,6 +302,14 @@
 			status = "disabled";
 		};
 
+		vec: vec@7ec13000 {
+			compatible = "brcm,bcm2711-vec";
+			reg = <0x7ec13000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		dvp: clock@7ef00000 {
 			compatible = "brcm,brcm2711-dvp";
 			reg = <0x7ef00000 0x10>;
@@ -308,14 +318,6 @@
 			#reset-cells = <1>;
 		};
 
-		bsc_intr: interrupt-controller@7ef00040 {
-			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
-			reg = <0x7ef00040 0x30>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
 		aon_intr: interrupt-controller@7ef00100 {
 			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
 			reg = <0x7ef00100 0x30>;
@@ -362,8 +364,6 @@
 			reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
 			reg-names = "bsc", "auto-i2c";
 			clock-frequency = <97500>;
-			interrupt-parent = <&bsc_intr>;
-			interrupts = <0>;
 			status = "disabled";
 		};
 
@@ -405,8 +405,6 @@
 			reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
 			reg-names = "bsc", "auto-i2c";
 			clock-frequency = <97500>;
-			interrupt-parent = <&bsc_intr>;
-			interrupts = <1>;
 			status = "disabled";
 		};
 	};
@@ -425,7 +423,7 @@
 		ranges = <0x0 0x7e000000  0x0 0xfe000000  0x01800000>;
 		dma-ranges = <0x0 0xc0000000  0x0 0x00000000  0x40000000>;
 
-		emmc2: emmc2@7e340000 {
+		emmc2: mmc@7e340000 {
 			compatible = "brcm,bcm2711-emmc2";
 			reg = <0x0 0x7e340000 0x100>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
@@ -462,12 +460,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/100095/0003
+		 * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+		 * Source for d/i-cache-size
+		 * https://www.raspberrypi.com/documentation/computers
+		 * /processors.html#bcm2711
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -476,6 +488,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -484,6 +503,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -492,6 +518,29 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 *  https://developer.arm.com/documentation/100095/0003
+		 *  /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+		 *  Source for d/i-cache-size
+		 *  https://www.raspberrypi.com/documentation/computers
+		 *  /processors.html#bcm2711
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+			cache-level = <2>;
 		};
 	};
 
@@ -510,11 +559,17 @@
 			#address-cells = <3>;
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pcie", "msi";
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 144
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 145
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 146
 							IRQ_TYPE_LEVEL_HIGH>;
 			msi-controller;
 			msi-parent = <&pcie0>;
@@ -544,10 +599,21 @@
 				compatible = "brcm,genet-mdio-v5";
 				reg = <0xe14 0x8>;
 				reg-names = "mdio";
-				#address-cells = <0x0>;
-				#size-cells = <0x1>;
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
 			};
 		};
+
+		v3d: gpu@7ec00000 {
+			compatible = "brcm,2711-v3d";
+			reg = <0x0 0x7ec00000 0x4000>,
+			      <0x0 0x7ec04000 0x4000>;
+			reg-names = "hub", "core0";
+
+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+			resets = <&pm BCM2835_RESET_V3D>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };
 
@@ -580,21 +646,23 @@
 		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 
-	gpclk0_gpio49: gpclk0_gpio49 {
+	gpio-ranges = <&gpio 0 0 58>;
+
+	gpclk0_gpio49: gpclk0-gpio49 {
 		pin-gpclk {
 			pins = "gpio49";
 			function = "alt1";
 			bias-disable;
 		};
 	};
-	gpclk1_gpio50: gpclk1_gpio50 {
+	gpclk1_gpio50: gpclk1-gpio50 {
 		pin-gpclk {
 			pins = "gpio50";
 			function = "alt1";
 			bias-disable;
 		};
 	};
-	gpclk2_gpio51: gpclk2_gpio51 {
+	gpclk2_gpio51: gpclk2-gpio51 {
 		pin-gpclk {
 			pins = "gpio51";
 			function = "alt1";
@@ -602,7 +670,7 @@
 		};
 	};
 
-	i2c0_gpio46: i2c0_gpio46 {
+	i2c0_gpio46: i2c0-gpio46 {
 		pin-sda {
 			function = "alt0";
 			pins = "gpio46";
@@ -614,7 +682,7 @@
 			bias-disable;
 		};
 	};
-	i2c1_gpio46: i2c1_gpio46 {
+	i2c1_gpio46: i2c1-gpio46 {
 		pin-sda {
 			function = "alt1";
 			pins = "gpio46";
@@ -626,7 +694,7 @@
 			bias-disable;
 		};
 	};
-	i2c3_gpio2: i2c3_gpio2 {
+	i2c3_gpio2: i2c3-gpio2 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio2";
@@ -638,7 +706,7 @@
 			bias-disable;
 		};
 	};
-	i2c3_gpio4: i2c3_gpio4 {
+	i2c3_gpio4: i2c3-gpio4 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio4";
@@ -650,7 +718,7 @@
 			bias-disable;
 		};
 	};
-	i2c4_gpio6: i2c4_gpio6 {
+	i2c4_gpio6: i2c4-gpio6 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio6";
@@ -662,7 +730,7 @@
 			bias-disable;
 		};
 	};
-	i2c4_gpio8: i2c4_gpio8 {
+	i2c4_gpio8: i2c4-gpio8 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio8";
@@ -674,7 +742,7 @@
 			bias-disable;
 		};
 	};
-	i2c5_gpio10: i2c5_gpio10 {
+	i2c5_gpio10: i2c5-gpio10 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio10";
@@ -686,7 +754,7 @@
 			bias-disable;
 		};
 	};
-	i2c5_gpio12: i2c5_gpio12 {
+	i2c5_gpio12: i2c5-gpio12 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio12";
@@ -698,7 +766,7 @@
 			bias-disable;
 		};
 	};
-	i2c6_gpio0: i2c6_gpio0 {
+	i2c6_gpio0: i2c6-gpio0 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio0";
@@ -710,7 +778,7 @@
 			bias-disable;
 		};
 	};
-	i2c6_gpio22: i2c6_gpio22 {
+	i2c6_gpio22: i2c6-gpio22 {
 		pin-sda {
 			function = "alt5";
 			pins = "gpio22";
@@ -722,7 +790,7 @@
 			bias-disable;
 		};
 	};
-	i2c_slave_gpio8: i2c_slave_gpio8 {
+	i2c_slave_gpio8: i2c-slave-gpio8 {
 		pins-i2c-slave {
 			pins = "gpio8",
 			       "gpio9",
@@ -732,7 +800,7 @@
 		};
 	};
 
-	jtag_gpio48: jtag_gpio48 {
+	jtag_gpio48: jtag-gpio48 {
 		pins-jtag {
 			pins = "gpio48",
 			       "gpio49",
@@ -744,7 +812,7 @@
 		};
 	};
 
-	mii_gpio28: mii_gpio28 {
+	mii_gpio28: mii-gpio28 {
 		pins-mii {
 			pins = "gpio28",
 			       "gpio29",
@@ -753,7 +821,7 @@
 			function = "alt4";
 		};
 	};
-	mii_gpio36: mii_gpio36 {
+	mii_gpio36: mii-gpio36 {
 		pins-mii {
 			pins = "gpio36",
 			       "gpio37",
@@ -763,7 +831,7 @@
 		};
 	};
 
-	pcm_gpio50: pcm_gpio50 {
+	pcm_gpio50: pcm-gpio50 {
 		pins-pcm {
 			pins = "gpio50",
 			       "gpio51",
@@ -773,63 +841,63 @@
 		};
 	};
 
-	pwm0_0_gpio12: pwm0_0_gpio12 {
+	pwm0_0_gpio12: pwm0-0-gpio12 {
 		pin-pwm {
 			pins = "gpio12";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_0_gpio18: pwm0_0_gpio18 {
+	pwm0_0_gpio18: pwm0-0-gpio18 {
 		pin-pwm {
 			pins = "gpio18";
 			function = "alt5";
 			bias-disable;
 		};
 	};
-	pwm1_0_gpio40: pwm1_0_gpio40 {
+	pwm1_0_gpio40: pwm1-0-gpio40 {
 		pin-pwm {
 			pins = "gpio40";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio13: pwm0_1_gpio13 {
+	pwm0_1_gpio13: pwm0-1-gpio13 {
 		pin-pwm {
 			pins = "gpio13";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio19: pwm0_1_gpio19 {
+	pwm0_1_gpio19: pwm0-1-gpio19 {
 		pin-pwm {
 			pins = "gpio19";
 			function = "alt5";
 			bias-disable;
 		};
 	};
-	pwm1_1_gpio41: pwm1_1_gpio41 {
+	pwm1_1_gpio41: pwm1-1-gpio41 {
 		pin-pwm {
 			pins = "gpio41";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio45: pwm0_1_gpio45 {
+	pwm0_1_gpio45: pwm0-1-gpio45 {
 		pin-pwm {
 			pins = "gpio45";
 			function = "alt0";
 			bias-disable;
 		};
 	};
-	pwm0_0_gpio52: pwm0_0_gpio52 {
+	pwm0_0_gpio52: pwm0-0-gpio52 {
 		pin-pwm {
 			pins = "gpio52";
 			function = "alt1";
 			bias-disable;
 		};
 	};
-	pwm0_1_gpio53: pwm0_1_gpio53 {
+	pwm0_1_gpio53: pwm0-1-gpio53 {
 		pin-pwm {
 			pins = "gpio53";
 			function = "alt1";
@@ -837,7 +905,7 @@
 		};
 	};
 
-	rgmii_gpio35: rgmii_gpio35 {
+	rgmii_gpio35: rgmii-gpio35 {
 		pin-start-stop {
 			pins = "gpio35";
 			function = "alt4";
@@ -847,26 +915,26 @@
 			function = "alt4";
 		};
 	};
-	rgmii_irq_gpio34: rgmii_irq_gpio34 {
+	rgmii_irq_gpio34: rgmii-irq-gpio34 {
 		pin-irq {
 			pins = "gpio34";
 			function = "alt5";
 		};
 	};
-	rgmii_irq_gpio39: rgmii_irq_gpio39 {
+	rgmii_irq_gpio39: rgmii-irq-gpio39 {
 		pin-irq {
 			pins = "gpio39";
 			function = "alt4";
 		};
 	};
-	rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
+	rgmii_mdio_gpio28: rgmii-mdio-gpio28 {
 		pins-mdio {
 			pins = "gpio28",
 			       "gpio29";
 			function = "alt5";
 		};
 	};
-	rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
+	rgmii_mdio_gpio37: rgmii-mdio-gpio37 {
 		pins-mdio {
 			pins = "gpio37",
 			       "gpio38";
@@ -874,7 +942,7 @@
 		};
 	};
 
-	spi0_gpio46: spi0_gpio46 {
+	spi0_gpio46: spi0-gpio46 {
 		pins-spi {
 			pins = "gpio46",
 			       "gpio47",
@@ -883,7 +951,7 @@
 			function = "alt2";
 		};
 	};
-	spi2_gpio46: spi2_gpio46 {
+	spi2_gpio46: spi2-gpio46 {
 		pins-spi {
 			pins = "gpio46",
 			       "gpio47",
@@ -893,7 +961,7 @@
 			function = "alt5";
 		};
 	};
-	spi3_gpio0: spi3_gpio0 {
+	spi3_gpio0: spi3-gpio0 {
 		pins-spi {
 			pins = "gpio0",
 			       "gpio1",
@@ -902,7 +970,7 @@
 			function = "alt3";
 		};
 	};
-	spi4_gpio4: spi4_gpio4 {
+	spi4_gpio4: spi4-gpio4 {
 		pins-spi {
 			pins = "gpio4",
 			       "gpio5",
@@ -911,7 +979,7 @@
 			function = "alt3";
 		};
 	};
-	spi5_gpio12: spi5_gpio12 {
+	spi5_gpio12: spi5-gpio12 {
 		pins-spi {
 			pins = "gpio12",
 			       "gpio13",
@@ -920,7 +988,7 @@
 			function = "alt3";
 		};
 	};
-	spi6_gpio18: spi6_gpio18 {
+	spi6_gpio18: spi6-gpio18 {
 		pins-spi {
 			pins = "gpio18",
 			       "gpio19",
@@ -930,7 +998,7 @@
 		};
 	};
 
-	uart2_gpio0: uart2_gpio0 {
+	uart2_gpio0: uart2-gpio0 {
 		pin-tx {
 			pins = "gpio0";
 			function = "alt4";
@@ -942,7 +1010,7 @@
 			bias-pull-up;
 		};
 	};
-	uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
+	uart2_ctsrts_gpio2: uart2-ctsrts-gpio2 {
 		pin-cts {
 			pins = "gpio2";
 			function = "alt4";
@@ -954,7 +1022,7 @@
 			bias-disable;
 		};
 	};
-	uart3_gpio4: uart3_gpio4 {
+	uart3_gpio4: uart3-gpio4 {
 		pin-tx {
 			pins = "gpio4";
 			function = "alt4";
@@ -966,7 +1034,7 @@
 			bias-pull-up;
 		};
 	};
-	uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
+	uart3_ctsrts_gpio6: uart3-ctsrts-gpio6 {
 		pin-cts {
 			pins = "gpio6";
 			function = "alt4";
@@ -978,7 +1046,7 @@
 			bias-disable;
 		};
 	};
-	uart4_gpio8: uart4_gpio8 {
+	uart4_gpio8: uart4-gpio8 {
 		pin-tx {
 			pins = "gpio8";
 			function = "alt4";
@@ -990,7 +1058,7 @@
 			bias-pull-up;
 		};
 	};
-	uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
+	uart4_ctsrts_gpio10: uart4-ctsrts-gpio10 {
 		pin-cts {
 			pins = "gpio10";
 			function = "alt4";
@@ -1002,7 +1070,7 @@
 			bias-disable;
 		};
 	};
-	uart5_gpio12: uart5_gpio12 {
+	uart5_gpio12: uart5-gpio12 {
 		pin-tx {
 			pins = "gpio12";
 			function = "alt4";
@@ -1014,7 +1082,7 @@
 			bias-pull-up;
 		};
 	};
-	uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
+	uart5_ctsrts_gpio14: uart5-ctsrts-gpio14 {
 		pin-cts {
 			pins = "gpio14";
 			function = "alt4";
@@ -1099,5 +1167,6 @@
 };
 
 &vec {
+	compatible = "brcm,bcm2711-vec";
 	interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index ead6e9804dbf..60c8ab8a2855 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013 Broadcom Corporation
 
 /dts-v1/;
 
@@ -26,27 +16,27 @@
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
-	uart@3e000000 {
+	serial@3e000000 {
 		status = "okay";
 	};
 
 	i2c@3e016000 {
-		status="okay";
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
 	i2c@3e017000 {
-		status="okay";
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
 	i2c@3e018000 {
-		status="okay";
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
 	i2c@3500d000 {
-		status="okay";
+		status = "okay";
 		clock-frequency = <100000>;
 
 		pmu: pmu@8 {
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
index 4119271c979d..bb7e8f7facaf 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -62,6 +62,7 @@
 			#reset-cells = <1>;
 			reg = <0x7e100000 0x114>,
 			      <0x7e00a000 0x24>;
+			reg-names = "pm", "asb";
 			clocks = <&clocks BCM2835_CLOCK_V3D>,
 				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
 				 <&clocks BCM2835_CLOCK_H264>,
@@ -106,6 +107,14 @@
 			status = "okay";
 		};
 
+		vec: vec@7e806000 {
+			compatible = "brcm,bcm2835-vec";
+			reg = <0x7e806000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <2 27>;
+			status = "disabled";
+		};
+
 		pixelvalve@7e807000 {
 			compatible = "brcm,bcm2835-pixelvalve2";
 			reg = <0x7e807000 0x100>;
@@ -143,41 +152,41 @@
 };
 
 &gpio {
-	i2c_slave_gpio18: i2c_slave_gpio18 {
+	i2c_slave_gpio18: i2c-slave-gpio18 {
 		brcm,pins = <18 19 20 21>;
 		brcm,function = <BCM2835_FSEL_ALT3>;
 	};
 
-	jtag_gpio4: jtag_gpio4 {
+	jtag_gpio4: jtag-gpio4 {
 		brcm,pins = <4 5 6 12 13>;
 		brcm,function = <BCM2835_FSEL_ALT5>;
 	};
 
-	pwm0_gpio12: pwm0_gpio12 {
+	pwm0_gpio12: pwm0-gpio12 {
 		brcm,pins = <12>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm0_gpio18: pwm0_gpio18 {
+	pwm0_gpio18: pwm0-gpio18 {
 		brcm,pins = <18>;
 		brcm,function = <BCM2835_FSEL_ALT5>;
 	};
-	pwm0_gpio40: pwm0_gpio40 {
+	pwm0_gpio40: pwm0-gpio40 {
 		brcm,pins = <40>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm1_gpio13: pwm1_gpio13 {
+	pwm1_gpio13: pwm1-gpio13 {
 		brcm,pins = <13>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm1_gpio19: pwm1_gpio19 {
+	pwm1_gpio19: pwm1-gpio19 {
 		brcm,pins = <19>;
 		brcm,function = <BCM2835_FSEL_ALT5>;
 	};
-	pwm1_gpio41: pwm1_gpio41 {
+	pwm1_gpio41: pwm1-gpio41 {
 		brcm,pins = <41>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-	pwm1_gpio45: pwm1_gpio45 {
+	pwm1_gpio45: pwm1-gpio45 {
 		brcm,pins = <45>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index 6c8ce39833bf..02ce817868ba 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
 / {
@@ -12,19 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -32,7 +21,6 @@
 	 * This is based on the unreleased schematic for the Model A+.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -67,21 +55,21 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
+			  "", /* GPIO30 */
+			  "", /* GPIO31 */
 			  "CAM_GPIO1", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
 			  "PWR_LOW_N", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
 			  "USB_LIMIT", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT", /* GPIO40 */
 			  "CAM_GPIO0", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
 			  "PWM1_OUT", /* GPIO45 */
 			  "HDMI_HPD_N",
 			  "STATUS_LED",
@@ -108,6 +96,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 17fdd48346ff..3fdf60eb11dc 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
 / {
@@ -12,12 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &gpio {
@@ -26,7 +22,6 @@
 	 * RPI00021 sheet 02
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -42,41 +37,41 @@
 			  "SPI_MISO",
 			  "SPI_MOSI",
 			  "SPI_SCLK",
-			  "NC", /* GPIO12 */
-			  "NC", /* GPIO13 */
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
 			  /* Serial port */
 			  "TXD0",
 			  "RXD0",
 			  "STATUS_LED_N",
 			  "GPIO17",
 			  "GPIO18",
-			  "NC", /* GPIO19 */
-			  "NC", /* GPIO20 */
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
 			  "GPIO21",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
 			  "GPIO25",
-			  "NC", /* GPIO26 */
+			  "", /* GPIO26 */
 			  "CAM_GPIO0",
 			  /* Binary number representing build/revision */
 			  "CONFIG0",
 			  "CONFIG1",
 			  "CONFIG2",
 			  "CONFIG3",
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT",
-			  "NC", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
 			  "PWM1_OUT",
 			  "HDMI_HPD_P",
 			  "SD_CARD_DET",
@@ -103,6 +98,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index b0355c229cdc..9956fd06a4b6 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,19 +15,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -34,7 +23,6 @@
 	 * RPI-BPLUS sheet 1
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -69,21 +57,21 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
+			  "", /* GPIO30 */
 			  "LAN_RUN", /* GPIO31 */
 			  "CAM_GPIO1", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
 			  "PWR_LOW_N", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
 			  "USB_LIMIT", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT", /* GPIO40 */
 			  "CAM_GPIO0", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "ETHCLK", /* GPIO44 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "ETH_CLK", /* GPIO44 */
 			  "PWM1_OUT", /* GPIO45 */
 			  "HDMI_HPD_N",
 			  "STATUS_LED",
@@ -110,6 +98,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 33b3b5c02521..4e1770afb145 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9512.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,12 +15,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &gpio {
@@ -27,7 +23,6 @@
 	 * RPI00022 sheet 02
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -43,40 +38,40 @@
 			  "SPI_MISO",
 			  "SPI_MOSI",
 			  "SPI_SCLK",
-			  "NC", /* GPIO12 */
-			  "NC", /* GPIO13 */
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
 			  /* Serial port */
 			  "TXD0",
 			  "RXD0",
 			  "STATUS_LED_N",
 			  "GPIO17",
 			  "GPIO18",
-			  "NC", /* GPIO19 */
-			  "NC", /* GPIO20 */
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
 			  "CAM_GPIO",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
 			  "GPIO25",
-			  "NC", /* GPIO26 */
+			  "", /* GPIO26 */
 			  "GPIO27",
 			  "GPIO28",
 			  "GPIO29",
 			  "GPIO30",
 			  "GPIO31",
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT",
-			  "NC", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
 			  "PWM1_OUT",
 			  "HDMI_HPD_P",
 			  "SD_CARD_DET",
@@ -103,6 +98,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 2b69957e0113..eec1d0892d33 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9512.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,12 +15,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &gpio {
@@ -27,7 +23,6 @@
 	 * RPI00021 sheet 02
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -43,41 +38,40 @@
 			  "SPI_MISO",
 			  "SPI_MOSI",
 			  "SPI_SCLK",
-			  "NC", /* GPIO12 */
-			  "NC", /* GPIO13 */
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
 			  /* Serial port */
 			  "TXD0",
 			  "RXD0",
 			  "STATUS_LED_N",
 			  "GPIO17",
 			  "GPIO18",
-			  "NC", /* GPIO19 */
-			  "NC", /* GPIO20 */
-			  "GPIO21",
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
+			  "CAM_GPIO0",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
 			  "GPIO25",
-			  "NC", /* GPIO26 */
-			  "CAM_GPIO0",
-			  /* Binary number representing build/revision */
-			  "CONFIG0",
-			  "CONFIG1",
-			  "CONFIG2",
-			  "CONFIG3",
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO26 */
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT",
-			  "NC", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
 			  "PWM1_OUT",
 			  "HDMI_HPD_P",
 			  "SD_CARD_DET",
@@ -98,6 +92,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
index a75c882e6575..87958a96c3e0 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
@@ -13,7 +13,6 @@
 	 * This is based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
index 58059c2ce129..750cd76948e3 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
@@ -2,10 +2,12 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 
 / {
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
@@ -32,6 +34,10 @@
 	};
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
 &sdhost {
 	non-removable;
 	vmmc-supply = <&reg_3v3>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
index 8a55b6cded59..4e7b4a592da7 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
@@ -7,6 +7,23 @@
 
 #include <dt-bindings/power/raspberrypi-power.h>
 
+&firmware {
+	firmware_clocks: clocks {
+		compatible = "raspberrypi,firmware-clocks";
+		#clock-cells = <1>;
+	};
+};
+
+&hdmi {
+	clocks = <&firmware_clocks 9>,
+		 <&firmware_clocks 13>;
+	clock-names = "pixel", "hdmi";
+};
+
 &v3d {
 	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
 };
+
+&vec {
+	clocks = <&firmware_clocks 15>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index f65448c01e31..dbf825985ec0 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -6,7 +6,10 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
 
 / {
 	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
@@ -21,17 +24,10 @@
 		/* 8250 auxiliary UART instead of pl011 */
 		stdout-path = "serial1:115200n8";
 	};
+};
 
-	leds {
-		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
-	};
+&bt {
+	shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
 };
 
 &gpio {
@@ -39,7 +35,6 @@
 	 * This is based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -74,19 +69,21 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
 			  "CAM_GPIO1", /* GPIO40 */
 			  "WL_ON", /* GPIO41 */
-			  "NC", /* GPIO42 */
+			  "", /* GPIO42 */
 			  "WIFI_CLK", /* GPIO43 */
 			  "CAM_GPIO0", /* GPIO44 */
 			  "BT_ON", /* GPIO45 */
@@ -109,20 +106,12 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
 &sdhci {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
-	bus-width = <4>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	non-removable;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
 };
 
 &sdhost {
@@ -135,13 +124,6 @@
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <2000000>;
-		shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
-	};
 };
 
 &uart1 {
@@ -149,3 +131,7 @@
 	pinctrl-0 = <&uart1_gpio14>;
 	status = "okay";
 };
+
+&wifi_pwrseq {
+	reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 6dd93c6f4966..f80e65a825fd 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-otg.dtsi"
 
 / {
@@ -16,12 +18,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
 &gpio {
@@ -29,7 +25,6 @@
 	 * This is based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -64,22 +59,22 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
+			  "", /* GPIO30 */
+			  "", /* GPIO31 */
 			  "CAM_GPIO1", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
-			  "NC", /* GPIO40 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "", /* GPIO40 */
 			  "CAM_GPIO0", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
-			  "NC", /* GPIO45 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "", /* GPIO45 */
 			  "HDMI_HPD_N",
 			  "STATUS_LED_N",
 			  /* Used by SD Card */
@@ -105,6 +100,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
 &sdhost {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdhost_gpio48>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index d94357b21f7e..ee9ee9d1fe65 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -1,16 +1,6 @@
 #include <dt-bindings/power/raspberrypi-power.h>
 
 / {
-	leds {
-		compatible = "gpio-leds";
-
-		act {
-			label = "ACT";
-			default-state = "keep";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
 	soc {
 		firmware: firmware {
 			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 0549686134ea..15cb331febbb 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
-#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2835";
@@ -14,6 +13,23 @@
 			device_type = "cpu";
 			compatible = "arm,arm1176jzf-s";
 			reg = <0x0>;
+			/* Source for d/i-cache-line-size and d/i-cache-sets
+			 * https://developer.arm.com/documentation/ddi0301
+			 * /h/level-one-memory-system/cache-organization?lang=en
+			 *
+			 * Source for d/i-cache-size
+			 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+			 *
+			 * NOTE: The BCM2835 has a L2 cache but it is dedicated to the GPU
+			 * It can be shared with the CPU through fw settings,
+			 * but this is not recommended.
+			 */
+			d-cache-size = <0x4000>;
+			d-cache-line-size = <16>;
+			d-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
+			i-cache-size = <0x4000>;
+			i-cache-line-size = <16>;
+			i-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
 		};
 	};
 
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 0455a680394a..6068ec390081 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 #include "bcm2836.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,19 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
-
-	leds {
-		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -34,7 +22,6 @@
 	 * the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -83,7 +70,7 @@
 			  "CAM_GPIO0",
 			  "SMPS_SCL",
 			  "SMPS_SDA",
-			  "ETHCLK",
+			  "ETH_CLK",
 			  "PWM1_OUT",
 			  "HDMI_HPD_N",
 			  "STATUS_LED",
@@ -110,6 +97,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2836-rpi.dtsi b/arch/arm/boot/dts/bcm2836-rpi.dtsi
index c4c858b984c6..48b03b55ff56 100644
--- a/arch/arm/boot/dts/bcm2836-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2836-rpi.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 &vchiq {
 	compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq";
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
index b390006aef79..783fe624ba68 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
-#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2836";
@@ -11,7 +10,7 @@
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc@40000000 {
+		local_intc: interrupt-controller@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
@@ -41,11 +40,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp";
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0464/f/L1-Memory-System
+		 * /About-the-L1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+		 */
+
 		v7_cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0xf00>;
 			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		v7_cpu1: cpu@1 {
@@ -53,6 +67,13 @@
 			compatible = "arm,cortex-a7";
 			reg = <0xf01>;
 			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		v7_cpu2: cpu@2 {
@@ -60,6 +81,13 @@
 			compatible = "arm,cortex-a7";
 			reg = <0xf02>;
 			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		v7_cpu3: cpu@3 {
@@ -67,6 +95,28 @@
 			compatible = "arm,cortex-a7";
 			reg = <0xf03>;
 			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0464/f/L2-Memory-System
+		 * /About-the-L2-Memory-system?lang=en
+		 * Source for cache-size
+		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set
+			cache-level = <2>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
index 28be0332c1c8..3548306dfbcb 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -2,7 +2,9 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
 
 / {
 	compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
@@ -17,19 +19,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		act {
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &firmware {
@@ -54,7 +43,6 @@
 	 * This is mostly based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -124,32 +112,23 @@
 	status = "okay";
 };
 
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
-	status = "okay";
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 };
 
-/*
- * SDHCI is used to control the SDIO for wireless
- *
- * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
- * by a single GPIO. We can't give GPIO control to one of the drivers,
- * otherwise the other part would get unexpectedly disturbed.
- */
-&sdhci {
-	#address-cells = <1>;
-	#size-cells = <0>;
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
 	status = "okay";
-	bus-width = <4>;
-	non-removable;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
 };
 
 /* SDHOST is used to drive the SD card */
@@ -160,16 +139,15 @@
 	bus-width = <4>;
 };
 
-/* uart0 communicates with the BT module */
+/* uart0 communicates with the BT module
+ *
+ * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
+ * by a single GPIO. We can't give GPIO control to one of the drivers,
+ * otherwise the other part would get unexpectedly disturbed.
+ */
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <2000000>;
-	};
 };
 
 /* uart1 is mapped to the pin header */
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index 37343148643d..2f1800cbc522 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -3,7 +3,9 @@
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
 #include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
 
 / {
 	compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
@@ -18,24 +20,10 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
+};
 
-	leds {
-		act {
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-	};
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
 };
 
 &firmware {
@@ -45,7 +33,7 @@
 		#gpio-cells = <2>;
 		gpio-line-names = "BT_ON",
 				  "WL_ON",
-				  "STATUS_LED_R",
+				  "PWR_LED_R",
 				  "LAN_RUN",
 				  "",
 				  "CAM_GPIO0",
@@ -61,7 +49,6 @@
 	 * the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -110,7 +97,7 @@
 			  "SD1_DATA3",
 			  "PWM0_OUT",
 			  "PWM1_OUT",
-			  "ETHCLK",
+			  "ETH_CLK",
 			  "WIFI_CLK",
 			  "SDA0",
 			  "SCL0",
@@ -131,27 +118,23 @@
 	status = "okay";
 };
 
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
-	status = "okay";
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
 };
 
-/* SDHCI is used to control the SDIO for wireless */
-&sdhci {
-	#address-cells = <1>;
-	#size-cells = <0>;
+&pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
 	status = "okay";
-	bus-width = <4>;
-	non-removable;
-	mmc-pwrseq = <&wifi_pwrseq>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
 };
 
 /* SDHOST is used to drive the SD card */
@@ -166,13 +149,6 @@
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <2000000>;
-		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-	};
 };
 
 /* uart1 is mapped to the pin header */
@@ -181,3 +157,7 @@
 	pinctrl-0 = <&uart1_gpio14>;
 	status = "okay";
 };
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 054ecaa355c9..61270340075c 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -2,8 +2,10 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
 
 / {
 	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
@@ -18,17 +20,10 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
+};
 
-	leds {
-		act {
-			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-	};
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
 };
 
 &firmware {
@@ -54,7 +49,6 @@
 	 * the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -103,7 +97,7 @@
 			  "SD1_DATA3",
 			  "PWM0_OUT",
 			  "PWM1_OUT",
-			  "ETHCLK",
+			  "ETH_CLK",
 			  "WIFI_CLK",
 			  "SDA0",
 			  "SCL0",
@@ -130,17 +124,14 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
+};
+
 /* uart0 communicates with the BT module */
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <2000000>;
-		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-	};
 };
 
 /* uart1 is mapped to the pin header */
@@ -150,23 +141,6 @@
 	status = "okay";
 };
 
-/* SDHCI is used to control the SDIO for wireless */
-&sdhci {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
-	status = "okay";
-	bus-width = <4>;
-	non-removable;
-	mmc-pwrseq = <&wifi_pwrseq>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
 /* SDHOST is used to drive the SD card */
 &sdhost {
 	pinctrl-names = "default";
@@ -174,3 +148,7 @@
 	status = "okay";
 	bus-width = <4>;
 };
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
index 588d9411ceb6..cf84e69fced8 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
@@ -13,7 +13,6 @@
 	 * This is based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -63,8 +62,8 @@
 			  "GPIO43",
 			  "GPIO44",
 			  "GPIO45",
-			  "GPIO46",
-			  "GPIO47",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
 			  /* Used by eMMC */
 			  "SD_CLK_R",
 			  "SD_CMD_R",
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index 925cb37c22f0..1e4e4946b6b6 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -9,14 +9,6 @@
 		reg = <0 0x40000000>;
 	};
 
-	leds {
-		/*
-		 * Since there is no upstream GPIO driver yet,
-		 * remove the incomplete node.
-		 */
-		/delete-node/ act;
-	};
-
 	reg_3v3: fixed-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";
@@ -41,12 +33,12 @@
 		#gpio-cells = <2>;
 		gpio-line-names = "HDMI_HPD_N",
 				  "EMMC_EN_N",
-				  "NC",
-				  "NC",
-				  "NC",
-				  "NC",
-				  "NC",
-				  "NC";
+				  "",
+				  "",
+				  "",
+				  "",
+				  "",
+				  "";
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
new file mode 100644
index 000000000000..b9cc4594398b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837";
+	model = "Raspberry Pi Zero 2 W";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&bt {
+	shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "CAM_GPIO0", /* GPIO40 */
+			  "WL_ON", /* GPIO41 */
+			  "BT_ON", /* GPIO42 */
+			  "WIFI_CLK", /* GPIO43 */
+			  "SDA0", /* GPIO44 */
+			  "SCL0", /* GPIO45 */
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+};
+
+&sdhci {
+	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
index 0199ec98cd61..84c08b46519d 100644
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -1,6 +1,5 @@
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
-#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2837";
@@ -40,12 +39,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+		 * /about-the-l1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -54,6 +67,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -62,6 +82,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -70,6 +97,28 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0500
+		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+		 * Source for cache-size
+		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+			cache-level = <2>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm283x-rpi-led-deprecated.dtsi b/arch/arm/boot/dts/bcm283x-rpi-led-deprecated.dtsi
new file mode 100644
index 000000000000..f83e56de1a72
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-led-deprecated.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	/*
+	 * This file provides the now deprecated ACT LED to the
+	 * Raspberry Pi boards. Please don't include this file
+	 * for new boards!
+	 */
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led_act: led-act {
+			label = "ACT";
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
index 967e081cb9c2..882b13807075 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
@@ -12,7 +12,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
index dc7ae776db5f..4273b90b53cc 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
@@ -11,7 +11,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
index 20322de2f8bf..e2fd9610e125 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 &usb {
 	dr_mode = "otg";
-	g-rx-fifo-size = <558>;
+	g-rx-fifo-size = <256>;
 	g-np-tx-fifo-size = <32>;
 	/*
 	 * According to dwc2 the sum of all device EP
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
index 1409d1b559c1..0ff0e9e25327 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 &usb {
 	dr_mode = "peripheral";
-	g-rx-fifo-size = <558>;
+	g-rx-fifo-size = <256>;
 	g-np-tx-fifo-size = <32>;
 	g-tx-fifo-size = <256 256 512 512 512 768 768>;
 };
diff --git a/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi b/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi
new file mode 100644
index 000000000000..0b64cc19941f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+	};
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	status = "okay";
+
+	bt: bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index b83a864e2e8b..c9c52a19ef3b 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -50,9 +50,9 @@
 
 			trips {
 				cpu-crit {
-					temperature	= <90000>;
-					hysteresis	= <0>;
-					type		= "critical";
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
 				};
 			};
 
@@ -126,6 +126,8 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
+			gpio-ranges = <&gpio 0 0 54>;
+
 			/* Defines common pin muxing groups
 			 *
 			 * While each pin can have its mux selected
@@ -133,17 +135,17 @@
 			 * groups only make sense to switch to a
 			 * particular function together.
 			 */
-			dpi_gpio0: dpi_gpio0 {
+			dpi_gpio0: dpi-gpio0 {
 				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
 					     12 13 14 15 16 17 18 19
 					     20 21 22 23 24 25 26 27>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
-			emmc_gpio22: emmc_gpio22 {
+			emmc_gpio22: emmc-gpio22 {
 				brcm,pins = <22 23 24 25 26 27>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
-			emmc_gpio34: emmc_gpio34 {
+			emmc_gpio34: emmc-gpio34 {
 				brcm,pins = <34 35 36 37 38 39>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 				brcm,pull = <BCM2835_PUD_OFF
@@ -153,95 +155,95 @@
 					     BCM2835_PUD_UP
 					     BCM2835_PUD_UP>;
 			};
-			emmc_gpio48: emmc_gpio48 {
+			emmc_gpio48: emmc-gpio48 {
 				brcm,pins = <48 49 50 51 52 53>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
 
-			gpclk0_gpio4: gpclk0_gpio4 {
+			gpclk0_gpio4: gpclk0-gpio4 {
 				brcm,pins = <4>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk1_gpio5: gpclk1_gpio5 {
+			gpclk1_gpio5: gpclk1-gpio5 {
 				brcm,pins = <5>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk1_gpio42: gpclk1_gpio42 {
+			gpclk1_gpio42: gpclk1-gpio42 {
 				brcm,pins = <42>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk1_gpio44: gpclk1_gpio44 {
+			gpclk1_gpio44: gpclk1-gpio44 {
 				brcm,pins = <44>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk2_gpio6: gpclk2_gpio6 {
+			gpclk2_gpio6: gpclk2-gpio6 {
 				brcm,pins = <6>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			gpclk2_gpio43: gpclk2_gpio43 {
+			gpclk2_gpio43: gpclk2-gpio43 {
 				brcm,pins = <43>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 				brcm,pull = <BCM2835_PUD_OFF>;
 			};
 
-			i2c0_gpio0: i2c0_gpio0 {
+			i2c0_gpio0: i2c0-gpio0 {
 				brcm,pins = <0 1>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c0_gpio28: i2c0_gpio28 {
+			i2c0_gpio28: i2c0-gpio28 {
 				brcm,pins = <28 29>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c0_gpio44: i2c0_gpio44 {
+			i2c0_gpio44: i2c0-gpio44 {
 				brcm,pins = <44 45>;
 				brcm,function = <BCM2835_FSEL_ALT1>;
 			};
-			i2c1_gpio2: i2c1_gpio2 {
+			i2c1_gpio2: i2c1-gpio2 {
 				brcm,pins = <2 3>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c1_gpio44: i2c1_gpio44 {
+			i2c1_gpio44: i2c1-gpio44 {
 				brcm,pins = <44 45>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 
-			jtag_gpio22: jtag_gpio22 {
+			jtag_gpio22: jtag-gpio22 {
 				brcm,pins = <22 23 24 25 26 27>;
 				brcm,function = <BCM2835_FSEL_ALT4>;
 			};
 
-			pcm_gpio18: pcm_gpio18 {
+			pcm_gpio18: pcm-gpio18 {
 				brcm,pins = <18 19 20 21>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			pcm_gpio28: pcm_gpio28 {
+			pcm_gpio28: pcm-gpio28 {
 				brcm,pins = <28 29 30 31>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 
-			sdhost_gpio48: sdhost_gpio48 {
+			sdhost_gpio48: sdhost-gpio48 {
 				brcm,pins = <48 49 50 51 52 53>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
 
-			spi0_gpio7: spi0_gpio7 {
+			spi0_gpio7: spi0-gpio7 {
 				brcm,pins = <7 8 9 10 11>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			spi0_gpio35: spi0_gpio35 {
+			spi0_gpio35: spi0-gpio35 {
 				brcm,pins = <35 36 37 38 39>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			spi1_gpio16: spi1_gpio16 {
+			spi1_gpio16: spi1-gpio16 {
 				brcm,pins = <16 17 18 19 20 21>;
 				brcm,function = <BCM2835_FSEL_ALT4>;
 			};
-			spi2_gpio40: spi2_gpio40 {
+			spi2_gpio40: spi2-gpio40 {
 				brcm,pins = <40 41 42 43 44 45>;
 				brcm,function = <BCM2835_FSEL_ALT4>;
 			};
 
-			uart0_gpio14: uart0_gpio14 {
+			uart0_gpio14: uart0-gpio14 {
 				brcm,pins = <14 15>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
@@ -250,50 +252,50 @@
 			 * people often run uart0 on the two pins
 			 * without flow control.
 			 */
-			uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
+			uart0_ctsrts_gpio16: uart0-ctsrts-gpio16 {
 				brcm,pins = <16 17>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
-			uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
+			uart0_ctsrts_gpio30: uart0-ctsrts-gpio30 {
 				brcm,pins = <30 31>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 				brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
 			};
-			uart0_gpio32: uart0_gpio32 {
+			uart0_gpio32: uart0-gpio32 {
 				brcm,pins = <32 33>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 				brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
 			};
-			uart0_gpio36: uart0_gpio36 {
+			uart0_gpio36: uart0-gpio36 {
 				brcm,pins = <36 37>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
-			uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 {
+			uart0_ctsrts_gpio38: uart0-ctsrts-gpio38 {
 				brcm,pins = <38 39>;
 				brcm,function = <BCM2835_FSEL_ALT2>;
 			};
 
-			uart1_gpio14: uart1_gpio14 {
+			uart1_gpio14: uart1-gpio14 {
 				brcm,pins = <14 15>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 {
+			uart1_ctsrts_gpio16: uart1-ctsrts-gpio16 {
 				brcm,pins = <16 17>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_gpio32: uart1_gpio32 {
+			uart1_gpio32: uart1-gpio32 {
 				brcm,pins = <32 33>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 {
+			uart1_ctsrts_gpio30: uart1-ctsrts-gpio30 {
 				brcm,pins = <30 31>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_gpio40: uart1_gpio40 {
+			uart1_gpio40: uart1-gpio40 {
 				brcm,pins = <40 41>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
+			uart1_ctsrts_gpio42: uart1-ctsrts-gpio42 {
 				brcm,pins = <42 43>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
@@ -350,8 +352,6 @@
 			clocks = <&clocks BCM2835_CLOCK_VPU>,
 				 <&clocks BCM2835_CLOCK_DPI>;
 			clock-names = "core", "pixel";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -420,7 +420,7 @@
 			status = "disabled";
 		};
 
-		sdhci: sdhci@7e300000 {
+		sdhci: mmc@7e300000 {
 			compatible = "brcm,bcm2835-sdhci";
 			reg = <0x7e300000 0x100>;
 			interrupts = <2 30>;
@@ -464,14 +464,6 @@
 			status = "disabled";
 		};
 
-		vec: vec@7e806000 {
-			compatible = "brcm,bcm2835-vec";
-			reg = <0x7e806000 0x1000>;
-			clocks = <&clocks BCM2835_CLOCK_VEC>;
-			interrupts = <2 27>;
-			status = "disabled";
-		};
-
 		usb: usb@7e980000 {
 			compatible = "brcm,bcm2835-usb";
 			reg = <0x7e980000 0x10000>;
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
index 6a96655d8626..c80ac16ad949 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -21,47 +21,46 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		all {
+		led-all {
 			label = "bcm53xx:blue:all";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
@@ -70,19 +69,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
index 3b0029e61b4c..3fe17bd7b86d 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -21,31 +21,31 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
@@ -54,25 +54,25 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		brightness {
+		button-brightness {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
new file mode 100644
index 000000000000..e583b9cbf07c
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		gpio-sck = <&chipcommon 7 0>;
+		gpio-mosi = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-usb {
+			/* label = "bcm53xx:blue:usb"; */
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>, <&ohci_port2>,
+					  <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-power0 {
+			/* label = "bcm53xx:red:power"; */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power1 {
+			/* label = "bcm53xx:white:power"; */
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router0 {
+			/*  label = "bcm53xx:blue:router"; */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router1 {
+			/* label = "bcm53xx:amber:router"; */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			/* label = "bcm53xx:blue:wan"; */
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wireless0 {
+			/* label = "bcm53xx:blue:wireless"; */
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless1 {
+			/* label = "bcm53xx:amber:wireless"; */
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Commit mode set by switch? */
+		button-mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: AP mode */
+		button-sw-ap {
+			label = "AP";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button-eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts
new file mode 100644
index 000000000000..8e506269fa1a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindigs for Buffalo WZR-1166DHP
+ *
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708";
+	model = "Buffalo WZR-1166DHP";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts
new file mode 100644
index 000000000000..596129027074
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindigs for Buffalo WZR-1166DHP2
+ *
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708";
+	model = "Buffalo WZR-1166DHP2";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 90f57bad6b24..43c698a0a7c3 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	spi {
@@ -49,7 +49,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -58,40 +58,40 @@
 			linux,default-trigger = "usbport";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:white:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:blue:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
@@ -100,33 +100,33 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Commit mode set by switch? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: AP mode */
-		sw_ap {
+		button-sw-ap {
 			label = "AP";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
index 41548d6d479a..0ed25bf71f0d 100644
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
@@ -21,16 +21,21 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x180000>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
index cd797b4202ad..f1412ba83def 100644
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
@@ -25,13 +25,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
index 5b4a481be4f4..6de7fe204b0c 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -23,19 +23,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
@@ -45,7 +45,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index 8636600385fd..f5b75ba93512 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -24,8 +24,8 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
-	nand: nand@18028000 {
-		nandcs@0 {
+	nand_controller: nand-controller@18028000 {
+		nand@0 {
 			partitions {
 				compatible = "fixed-partitions";
 				#address-cells = <1>;
@@ -42,7 +42,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
@@ -52,7 +52,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index fed75e6ab58c..89155caf50be 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -20,33 +20,33 @@
 		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -54,7 +54,7 @@
 			linux,default-trigger = "usbport";
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
@@ -63,19 +63,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
@@ -94,3 +94,40 @@
 &usb3_phy {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index 79542e18915c..57d00a0b4765 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -21,36 +21,36 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
@@ -59,19 +59,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index 51c64f0b2560..26cdeb5cc337 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -21,71 +21,71 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3-white {
+		led-usb3-white {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&xhci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3-green {
+		led-usb3-green {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-red {
+		led-status-red {
 			label = "bcm53xx:red:status";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-green {
+		led-status-green {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-blue {
+		led-status-blue {
 			label = "bcm53xx:blue:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-red {
+		led-wan-red {
 			label = "bcm53xx:red:wan";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 		};
@@ -94,19 +94,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
index c29950b43a95..3854db0118a9 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -21,37 +21,37 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
@@ -60,13 +60,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index 2f2d2b0a6893..407319cb5c0d 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	spi {
@@ -49,40 +49,40 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:green:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:green:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
@@ -91,29 +91,66 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch device mode? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
index 0e349e39f608..f8622ecce6a2 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	spi {
@@ -49,45 +49,45 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:green:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:green:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
@@ -96,7 +96,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
index 68aaf0af3945..76c9b30b868d 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -23,19 +23,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
@@ -45,7 +45,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
index 432254383769..6ef0c0788e62 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -21,65 +21,70 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan3 {
+		led-lan3 {
 			label = "bcm53xx:green:lan3";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		lan4 {
+		led-lan4 {
 			label = "bcm53xx:green:lan4";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		lan2 {
+		led-lan2 {
 			label = "bcm53xx:green:lan2";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
 		};
 
-		lan1 {
+		led-lan1 {
 			label = "bcm53xx:green:lan1";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "none";
@@ -89,7 +94,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
index 12e34a0439b4..b6a5886698b2 100644
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -23,50 +23,50 @@
 	leds {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:green:lan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2-port1 {
+		led-usb2-port1 {
 			label = "bcm53xx:green:usb2-port1";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-green {
+		led-wan-green {
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:green:wps";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2-port2 {
+		led-usb2-port2 {
 			label = "bcm53xx:green:usb2-port2";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
@@ -77,13 +77,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
@@ -95,30 +95,15 @@
 	status = "okay";
 
 	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		boot@0 {
-			label = "boot";
-			reg = <0x000000 0x040000>;
-			read-only;
-		};
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
 
-		os-image@100000 {
-			label = "os-image";
-			reg = <0x040000 0x200000>;
+		partition-os-image {
 			compatible = "brcm,trx";
 		};
 
-		rootfs@240000 {
-			label = "rootfs";
-			reg = <0x240000 0xc00000>;
-		};
-
-		nvram@ff0000 {
-			label = "nvram";
-			reg = <0xff0000 0x010000>;
+		partition-file-system {
+			linux,rootfs;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index 8f1e565c3db4..4f44cb4df704 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -19,27 +19,27 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:red:wan";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
@@ -47,16 +47,14 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index ce888b1835d1..b7cd2faa30ce 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -19,57 +19,57 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router-amber {
+		led-router-amber {
 			label = "bcm53xx:amber:router";
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		router-white {
+		led-router-white {
 			label = "bcm53xx:white:router";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless-amber {
+		led-wireless-amber {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless-white {
+		led-wireless-white {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
@@ -77,42 +77,40 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power";
 			linux,code = <KEY_POWER>;
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Commit mode set by switch? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: AP mode */
-		sw_ap {
+		button-sw-ap {
 			label = "AP";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
index ed8619b54d69..99253fd7adb3 100644
--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -16,24 +16,27 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x180000>;
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index 1f87993eae1d..24ba8f8f9bf3 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -19,52 +19,52 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:white:5ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
@@ -72,22 +72,20 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 6c6199a53d09..14303ab521ea 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -30,68 +30,68 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz-1 {
+		led-5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz-2 {
+		led-5ghz-2 {
 			label = "bcm53xx:white:5ghz-2";
 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
@@ -99,28 +99,26 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-		brightness {
+		button-brightness {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
@@ -187,3 +185,45 @@
 &usb3_phy {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@8 {
+			reg = <8>;
+			label = "cpu";
+			ethernet = <&gmac2>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index f806be5da723..5a8b2b1567e6 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -15,7 +15,7 @@
 		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
@@ -23,27 +23,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -51,24 +51,24 @@
 			linux,default-trigger = "usbport";
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		wan-blue {
+		led-wan-blue {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
@@ -77,16 +77,14 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
@@ -106,30 +104,15 @@
 	status = "okay";
 
 	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		boot@0 {
-			label = "boot";
-			reg = <0x000000 0x040000>;
-			read-only;
-		};
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
 
-		os-image@100000 {
-			label = "os-image";
-			reg = <0x040000 0x200000>;
+		partition-os-image {
 			compatible = "brcm,trx";
 		};
 
-		rootfs@240000 {
-			label = "rootfs";
-			reg = <0x240000 0xc00000>;
-		};
-
-		nvram@ff0000 {
-			label = "nvram";
-			reg = <0xff0000 0x010000>;
+		partition-file-system {
+			linux,rootfs;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
new file mode 100644
index 000000000000..a50ff686b557
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2021-2022 Arınç ÜNAL <arinc.unal@arinc9.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Asus RT-AC88U";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+
+		et1macaddr: et1macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "white:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-red {
+			label = "red:wan";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-lan {
+			label = "white:lan";
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "white:usb2";
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3 {
+			label = "white:usb3";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ehci_port1>, <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wps {
+			label = "white:wps";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+
+		button-led {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	switch {
+		compatible = "realtek,rtl8365mb";
+		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
+		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		realtek,disable-leds;
+		dsa,member = <1 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+				phy-handle = <&ethphy0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan6";
+				phy-handle = <&ethphy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&ethphy2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan8";
+				phy-handle = <&ethphy3>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&sw0_p5>;
+				phy-mode = "rgmii";
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <2100>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+	status = "okay";
+	dsa,member = <0 0>;
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		sw0_p5: port@5 {
+			reg = <5>;
+			label = "extsw";
+			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+				pause;
+			};
+		};
+
+		port@7 {
+			reg = <7>;
+			ethernet = <&gmac1>;
+			label = "cpu";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			reg = <8>;
+			ethernet = <&gmac2>;
+			label = "cpu";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&gmac0 {
+	status = "disabled";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "nvram";
+			reg = <0x00080000 0x00180000>;
+		};
+
+		partition@200000 {
+			label = "firmware";
+			reg = <0x00200000 0x07e00000>;
+			compatible = "brcm,trx";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 911c65fbf251..555fbe41dd8f 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -21,12 +21,12 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
-	nand: nand@18028000 {
-		nandcs@0 {
+	nand_controller: nand-controller@18028000 {
+		nand@0 {
 			partitions {
 				compatible = "fixed-partitions";
 				#address-cells = <1>;
@@ -43,28 +43,28 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3-white {
+		led-usb3-white {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -72,12 +72,12 @@
 			linux,default-trigger = "usbport";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:white:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
@@ -86,20 +86,20 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: router / extender */
-		extender {
+		button-extender {
 			label = "Extender";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
@@ -118,3 +118,45 @@
 &usb3_phy {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@8 {
+			reg = <8>;
+			label = "cpu";
+			ethernet = <&gmac2>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
new file mode 100644
index 000000000000..d945a20b06e0
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device tree for D-Link DIR-890L
+ * D-Link calls this board "WRGAC36"
+ * this router has the same looks and form factor as D-Link DIR-885L.
+ *
+ * Some differences from DIR-885L include a separate USB2 port, separate LEDs
+ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no
+ * router/extender switch is mounted (there is an empty mount point on the
+ * PCB) so this device is a pure router. Also the LAN ports are in the right
+ * order.
+ *
+ * Based on the device tree for DIR-885L
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 Linus Walleij
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+	compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-890L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		/*
+		 * LED information is derived from the boot log which
+		 * conveniently lists all the LEDs.
+		 */
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb2-white {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Called "factory reset" in the vendor dmesg */
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * The flash memory is memory mapped at 0x1e000000-0x1fffffff
+	 * 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e1f0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e1f0000 0x00010000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+};
+
+&gmac2 {
+	/*
+	 * The NVRAM curiously does not contain a MAC address
+	 * for et2 so since that is the only ethernet interface
+	 * actually in use on the platform, we use this et0 MAC
+	 * address for et2.
+	 */
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&nandcs {
+	/* Spansion S34ML01G2, 128MB with 128KB erase blocks */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * This is called "nflash" in the vendor kernel with
+		 * "upgrade" and "rootfs" (probably using OpenWrt
+		 * splitpart). We call it "firmware" like standard tools
+		 * assume. The CFE loader contains incorrect information
+		 * about TRX partitions, ignore this, there are no TRX
+		 * partitions: this device uses SEAMA.
+		 */
+		firmware@0 {
+			label = "firmware";
+			reg = <0x00000000 0x08000000>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@8 {
+			reg = <8>;
+			label = "cpu";
+			ethernet = <&gmac2>;
+			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 3725f2b0d60b..d9a16a820e7f 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -18,26 +18,31 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x100000>;
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 				label = "WiFi";
 				linux,code = <KEY_RFKILL>;
 				gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 		};
 
-		reset {
+		button-reset {
 				label = "Reset";
 				linux,code = <KEY_RESTART>;
 				gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
@@ -47,19 +52,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:green:usb2";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -67,63 +72,64 @@
 			linux,default-trigger = "usbport";
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
 		};
 
-		wifi-disabled {
+		led-wifi-disabled {
 			label = "bcm53xx:amber:wifi-disabled";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wifi-enabled {
+		led-wifi-enabled {
 			label = "bcm53xx:white:wifi-enabled";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar1 {
+		led-bluebar1 {
 			label = "bcm53xx:white:bluebar1";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar2 {
+		led-bluebar2 {
 			label = "bcm53xx:white:bluebar2";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar3 {
+		led-bluebar3 {
 			label = "bcm53xx:white:bluebar3";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 
-		bluebar4 {
+		led-bluebar4 {
 			label = "bcm53xx:white:bluebar4";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar5 {
+		led-bluebar5 {
 			label = "bcm53xx:white:bluebar5";
 			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar6 {
+		led-bluebar6 {
 			label = "bcm53xx:white:bluebar6";
 			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar7 {
+		led-bluebar7 {
 			label = "bcm53xx:white:bluebar7";
 			gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		bluebar8 {
+		led-bluebar8 {
 			label = "bcm53xx:white:bluebar8";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
-	mdio-bus-mux@18003000 {
+	mdio-mux@18003000 {
 
 		/* BIT(9) = 1 => external mdio */
 		mdio@200 {
@@ -274,7 +280,7 @@
 
 &nandcs {
 	partitions {
-		compatible = "fixed-partitions";
+		compatible = "linksys,ns-partitions";
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -295,20 +301,18 @@
 		};
 
 		partition@200000 {
-			label = "firmware";
-			reg = <0x0200000 0x01D00000>;
-			compatible = "brcm,trx";
+			reg = <0x0200000 0x01d00000>;
+			compatible = "linksys,ns-firmware", "brcm,trx";
 		};
 
-		partition@1F00000 {
-			label = "failsafe";
-			reg = <0x01F00000 0x01D00000>;
-			read-only;
+		partition@1f00000 {
+			reg = <0x01f00000 0x01d00000>;
+			compatible = "linksys,ns-firmware", "brcm,trx";
 		};
 
 		partition@5200000 {
 			label = "system";
-			reg = <0x05200000 0x02E00000>;
+			reg = <0x05200000 0x02e00000>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
index 50f7cd08cfbb..41a0722fa64a 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -18,20 +18,25 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -44,7 +49,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
@@ -63,3 +68,40 @@
 &usb3_phy {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "wan";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan4";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan2";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan1";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
index 6fa101f0a90d..c56c7e366848 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
@@ -23,18 +23,18 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status	{
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
@@ -43,7 +43,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
index bcc420f85b56..1b5c91a524ac 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -18,20 +18,25 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -44,7 +49,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
@@ -63,3 +68,40 @@
 &usb3_phy {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "wan";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan4";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan2";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan1";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
index 4f8d777ae18d..739063b77b1f 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -16,16 +16,16 @@
 		bootargs = "earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		status	{
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
@@ -34,10 +34,8 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index e17e9a17fb00..7afc68d5d2c2 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -18,45 +18,50 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power	{
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan3	{
+		led-lan3 {
 			label = "bcm53xx:green:lan3";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		lan4	{
+		led-lan4 {
 			label = "bcm53xx:green:lan4";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		wan	{
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		lan1	{
+		led-lan1 {
 			label = "bcm53xx:green:lan1";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		lan2	{
+		led-lan2 {
 			label = "bcm53xx:green:lan2";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3	{
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -64,18 +69,18 @@
 			linux,default-trigger = "usbport";
 		};
 
-		status	{
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
@@ -84,7 +89,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 60cc87ecc7ec..60a2c441d5bd 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -18,20 +18,28 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power	{
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3	{
+		led-usb3 {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -39,18 +47,18 @@
 			linux,default-trigger = "usbport";
 		};
 
-		status	{
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
@@ -59,7 +67,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
@@ -67,6 +75,11 @@
 	};
 };
 
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
 &usb3 {
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
index f42a1703f4ab..76d562610654 100644
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -18,45 +18,45 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-1 {
+		led-5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-2 {
+		led-5ghz-2 {
 			label = "bcm53xx:white:5ghz-2";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
@@ -65,25 +65,25 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		brightness {
+		button-brightness {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
index ac3a4483dcb3..3bf6e24978ac 100644
--- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
@@ -15,14 +15,14 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
index 2a8f7312d1be..6282363313e1 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -11,7 +11,7 @@
 &pinctrl {
 	compatible = "brcm,bcm4709-pinmux";
 
-	pinmux_mdio: mdio {
+	pinmux_mdio: mdio-pins {
 		groups = "mdio_grp";
 		function = "mdio";
 	};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
index 57ca1cfaecd8..0734aa249b8e 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
@@ -23,13 +23,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wlan {
+		led-wlan {
 			label = "bcm53xx:blue:wlan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-off";
 		};
 
-		system {
+		led-system {
 			label = "bcm53xx:green:system";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
@@ -39,7 +39,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
index 2e1a7e382cb7..e6fb6cbe6963 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
@@ -20,26 +20,26 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
-	leds {
+	leds-0 {
 		compatible = "gpio-leds";
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-off";
 		};
 
-		system {
+		led-system {
 			label = "bcm53xx:green:system";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 		};
 	};
 
-	pcie0_leds {
+	leds-1 {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-off";
@@ -49,7 +49,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
index 049cdfd92706..dab2e5f63a72 100644
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -20,37 +20,37 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
-	leds {
+	leds-0 {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		system {
+		led-system {
 			label = "bcm53xx:blue:system";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 		};
 	};
 
-	pcie0_leds {
+	leds-1 {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
 		};
@@ -59,19 +59,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
@@ -105,3 +105,40 @@
 		};
 	};
 };
+
+&switch {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "wan";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan1";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan3";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan4";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi
new file mode 100644
index 000000000000..cd25ed2757b7
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47622.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm47622", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>, <&CA7_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
new file mode 100644
index 000000000000..14f58033efeb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR26 / Codename: Venom
+ *
+ * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708";
+	model = "Meraki MR26";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <50000000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&nandcs {
+	nand-ecc-algo = "hw";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x200000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x200000 0x200000>;
+			/* empty */
+		};
+
+		partition@400000 {
+			label = "u-boot-backup";
+			reg = <0x400000 0x200000>;
+			/* empty */
+		};
+
+		partition@600000 {
+			label = "u-boot-env-backup";
+			reg = <0x600000 0x200000>;
+			/* empty */
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+
+			fixed-link {
+				speed = <1000>;
+				duplex-full;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	ina219@40 {
+		compatible = "ti,ina219"; /* PoE power */
+		reg = <0x40>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* it's empty */
+	};
+};
+
+&thermal {
+	status = "disabled";
+	/* does not work, reads 418 degree Celsius */
+};
diff --git a/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
new file mode 100644
index 000000000000..c1f54391746f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DWL-8610AP";
+	compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		/* 512 MB RAM in 2 x Macronix D9PSH chips */
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-diag {
+			/* Actually "diag" unclear what this means */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-wlan-2g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wlan-5g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			/* This GPIO is actually stored in NVRAM, but it's not gonna change */
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * Flash memory at 0x1e000000-0x1fffffff
+	 * Macronix 32 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e080000 0x00020000>;
+
+		et0macaddr: et0macaddr {
+		};
+
+		et1macaddr: et1macaddr {
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	/* Serial SPI NOR Flash MX 25L1606E */
+	status = "okay";
+};
+
+&nandcs {
+	/*
+	 * Spansion S34ML01G100TFI00 128 MB NAND Flash memory
+	 *
+	 * This ECC is a bit unorthodox but it is what the stock firmware
+	 * is using, so to be able to mount the original partitions
+	 * this is necessary.
+	 */
+	nand-ecc-strength = <5>;
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* This is named nflash1.trx in CFE */
+		trx@0 {
+			label = "firmware";
+			reg = <0x00000000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.trx2 in CFE */
+		trx2@2800000 {
+			label = "firmware2";
+			reg = <0x02800000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.rwfs in CFE */
+		free@5000000 {
+			label = "free";
+			reg = <0x05000000 0x03000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
index 3b978dc8997a..46c2c93b01d8 100644
--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -13,14 +13,14 @@
 #include <dt-bindings/leds/common.h>
 
 / {
-	compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708";
+	compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708";
 	model = "Meraki MR32";
 
 	chosen {
 		bootargs = " console=ttyS0,115200n8 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x08000000>;
 		device_type = "memory";
 	};
@@ -47,10 +47,8 @@
 
 	keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
@@ -60,7 +58,7 @@
 	pwm-leds {
 		compatible = "pwm-leds";
 
-		red {
+		led-0 {
 			/* SYS-LED 1 - Tricolor */
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_RED>;
@@ -68,7 +66,7 @@
 			max-brightness = <255>;
 		};
 
-		green {
+		led-1 {
 			/* SYS-LED 1 - Tricolor */
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_GREEN>;
@@ -76,7 +74,7 @@
 			max-brightness = <255>;
 		};
 
-		blue {
+		led-2 {
 			/* SYS-LED 1 - Tricolor */
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_BLUE>;
@@ -84,34 +82,6 @@
 			max-brightness = <255>;
 		};
 	};
-
-	i2c {
-		/*
-		 * The platform provided I2C does not budge.
-		 * This is a replacement until I can figure
-		 * out what are the missing bits...
-		 */
-
-		compatible = "i2c-gpio";
-		sda-gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-		scl-gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-		i2c-gpio,delay-us = <10>; /* close to 100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		current_sense: ina219@45 {
-			compatible = "ti,ina219";
-			reg = <0x45>;
-			shunt-resistor = <60000>; /* = 60 mOhms */
-		};
-
-		eeprom: eeprom@50 {
-			compatible = "atmel,24c64";
-			reg = <0x50>;
-			pagesize = <32>;
-			read-only;
-		};
-	};
 };
 
 &uart0 {
@@ -133,6 +103,11 @@
 	 */
 };
 
+&gmac0 {
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&mac_address>;
+};
+
 &gmac1 {
 	status = "disabled";
 };
@@ -195,3 +170,53 @@
 		};
 	};
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+
+			fixed-link {
+				speed = <1000>;
+				duplex-full;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	current_sense: ina219@45 {
+		compatible = "ti,ina219";
+		reg = <0x45>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mac_address: mac-address@66 {
+			reg = <0x66 0x6>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
index 925a7c9ce5b7..be9a00ff752d 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
@@ -6,8 +6,8 @@
  */
 
 / {
-	nand@18028000 {
-		nandcs: nandcs@0 {
+	nand-controller@18028000 {
+		nandcs: nand@0 {
 			compatible = "brcm,nandcs";
 			reg = <0>;
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 7db72a2f1020..5fc1b847f4aa 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -19,7 +19,7 @@
 	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
-	chipcommonA@18000000 {
+	chipcommon-a-bus@18000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x00001000>;
 		#address-cells = <1>;
@@ -44,7 +44,7 @@
 		};
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -148,15 +148,6 @@
 		};
 	};
 
-	usb2_phy: usb2-phy@1800c000 {
-		compatible = "brcm,ns-usb2-phy";
-		reg = <0x1800c000 0x1000>;
-		reg-names = "dmu";
-		#phy-cells = <0>;
-		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-		clock-names = "phy-ref-clk";
-	};
-
 	axi@18000000 {
 		compatible = "brcm,bus-axi";
 		reg = <0x18000000 0x1000>;
@@ -242,6 +233,8 @@
 
 			gpio-controller;
 			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		pcie0: pcie@12000 {
@@ -369,8 +362,8 @@
 		#address-cells = <1>;
 	};
 
-	mdio-bus-mux@18003000 {
-		compatible = "mdio-mux-mmioreg";
+	mdio-mux@18003000 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
 		mdio-parent-bus = <&mdio>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -408,27 +401,27 @@
 	i2c0: i2c@18009000 {
 		compatible = "brcm,iproc-i2c";
 		reg = <0x18009000 0x50>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clock-frequency = <100000>;
 		status = "disabled";
 	};
 
-	dmu@1800c000 {
+	dmu-bus@1800c000 {
 		compatible = "simple-bus";
 		ranges = <0 0x1800c000 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		cru@100 {
-			compatible = "simple-bus";
+		cru-bus@100 {
+			compatible = "brcm,ns-cru", "simple-mfd";
 			reg = <0x100 0x1a4>;
 			ranges;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			lcpll0: lcpll0@100 {
+			lcpll0: clock-controller@100 {
 				#clock-cells = <1>;
 				compatible = "brcm,nsp-lcpll0";
 				reg = <0x100 0x14>;
@@ -437,7 +430,7 @@
 						     "sdio", "ddr_phy";
 			};
 
-			genpll: genpll@140 {
+			genpll: clock-controller@140 {
 				#clock-cells = <1>;
 				compatible = "brcm,nsp-genpll";
 				reg = <0x140 0x24>;
@@ -448,7 +441,21 @@
 						     "sata1", "sata2";
 			};
 
-			pinctrl: pin-controller@1c0 {
+			usb2_phy: phy@164 {
+				compatible = "brcm,ns-usb2-phy";
+				reg = <0x164 0x4>;
+				brcm,syscon-clkset = <&cru_clkset>;
+				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+				clock-names = "phy-ref-clk";
+				#phy-cells = <0>;
+			};
+
+			cru_clkset: syscon@180 {
+				compatible = "brcm,cru-clkset", "syscon";
+				reg = <0x180 0x4>;
+			};
+
+			pinctrl: pinctrl@1c0 {
 				compatible = "brcm,bcm4708-pinmux";
 				reg = <0x1c0 0x24>;
 				reg-names = "cru_gpio_control";
@@ -458,18 +465,18 @@
 					function = "spi";
 				};
 
-				pinmux_i2c: i2c {
+				pinmux_i2c: i2c-pins {
 					groups = "i2c_grp";
 					function = "i2c";
 				};
 
-				pinmux_pwm: pwm {
+				pinmux_pwm: pwm-pins {
 					groups = "pwm0_grp", "pwm1_grp",
 						 "pwm2_grp", "pwm3_grp";
 					function = "pwm";
 				};
 
-				pinmux_uart1: uart1 {
+				pinmux_uart1: uart1-pins {
 					groups = "uart1_grp";
 					function = "uart1";
 				};
@@ -501,7 +508,7 @@
 		reg = <0x18004000 0x14>;
 	};
 
-	nand: nand@18028000 {
+	nand_controller: nand-controller@18028000 {
 		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
 		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
 		reg-names = "nand", "iproc-idm", "iproc-ext";
@@ -520,27 +527,27 @@
 		      <0x1811b408 0x004>,
 		      <0x180293a0 0x01c>;
 		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "spi_lr_fullness_reached",
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mspi_done",
+				  "mspi_halted",
+				  "spi_lr_fullness_reached",
 				  "spi_lr_session_aborted",
 				  "spi_lr_impatient",
 				  "spi_lr_session_done",
-				  "spi_lr_overhead",
-				  "mspi_done",
-				  "mspi_halted";
+				  "spi_lr_overread";
 		clocks = <&iprocmed>;
 		clock-names = "iprocmed";
 		num-cs = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		spi_nor: spi-nor@0 {
+		spi_nor: flash@0 {
 			compatible = "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
@@ -561,9 +568,9 @@
 
 			trips {
 				cpu-crit {
-					temperature	= <125000>;
-					hysteresis	= <0>;
-					type		= "critical";
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
 				};
 			};
 
diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
index 2e7fda9b998c..975f854f652f 100644
--- a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
+++ b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
@@ -34,7 +34,7 @@
 	status = "okay";
 	bspi-sel = <0>;
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "m25p80";
 		reg = <0>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
index 51546fccc616..3f03a381db0f 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -180,6 +180,24 @@
 
 		gmac0: ethernet@5000 {
 			reg = <0x5000 0x1000>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch: switch@1e {
+					compatible = "brcm,bcm53125";
+					reg = <0x1e>;
+
+					status = "disabled";
+
+					/* ports are defined in board DTS */
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+			};
 		};
 
 		gmac1: ethernet@b000 {
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index 9c0325cf9e22..93281c47c9ba 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -9,8 +9,8 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
-	compatible = "brcm,bcm63138";
-	model = "Broadcom BCM63138 DSL SoC";
+	compatible = "brcm,bcm63138", "brcm,bcmbca";
+	model = "Broadcom BCM963138 Reference Board";
 	interrupt-parent = <&gic>;
 
 	aliases {
@@ -66,6 +66,12 @@
 			clock-div = <4>;
 			clock-mult = <1>;
 		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
 	};
 
 	/* ARM bus */
@@ -203,7 +209,19 @@
 			status = "disabled";
 		};
 
-		nand: nand@2000 {
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@2000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
diff --git a/arch/arm/boot/dts/bcm63148.dtsi b/arch/arm/boot/dts/bcm63148.dtsi
new file mode 100644
index 000000000000..ba7f265db121
--- /dev/null
+++ b/arch/arm/boot/dts/bcm63148.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm63148", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		B15_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b15";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B15_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b15";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B15_0>, <&B15_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@80030000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x80030000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x8000>;
+
+		uart0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x20>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi
new file mode 100644
index 000000000000..d8268a1e889b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm63178.dtsi
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm63178", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm6756.dtsi b/arch/arm/boot/dts/bcm6756.dtsi
new file mode 100644
index 000000000000..49ecc1f0c18c
--- /dev/null
+++ b/arch/arm/boot/dts/bcm6756.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6756", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>, <&CA7_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi
new file mode 100644
index 000000000000..fbc7d3a5dc5f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm6846.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6846", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x1b>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm6855.dtsi b/arch/arm/boot/dts/bcm6855.dtsi
new file mode 100644
index 000000000000..5e0fe26530f1
--- /dev/null
+++ b/arch/arm/boot/dts/bcm6855.dtsi
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6855", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi
new file mode 100644
index 000000000000..96529d3d4dc2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm6878.dtsi
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6878", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
index 8313b7cad542..f92d2cf85972 100644
--- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
@@ -14,10 +14,10 @@
 	};
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@1 {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <1>;
 		nand-ecc-step-size = <512>;
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 58f67c9b830b..5ac2042515b8 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -148,7 +148,7 @@
 			reg-names = "aon-ctrl", "aon-sram";
 		};
 
-		nand: nand@3e2800 {
+		nand_controller: nand-controller@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index b2d323f4a5ab..363009e747b3 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -47,10 +47,10 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		hook {
+		button-hook {
 			label = "HOOK";
 			linux,code = <KEY_O>;
 			gpios = <&gpio_asiu 48 0>;
@@ -82,8 +82,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
index 3d13e46c6949..d9eb2040b963 100644
--- a/arch/arm/boot/dts/bcm94708.dts
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -38,7 +38,7 @@
 	model = "NorthStar SVK (BCM94708)";
 	compatible = "brcm,bcm94708", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
index 5017b7b259cb..618c812eef73 100644
--- a/arch/arm/boot/dts/bcm94709.dts
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -38,7 +38,7 @@
 	model = "NorthStar SVK (BCM94709)";
 	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts
index b0b8c774a37f..3709baa2376f 100644
--- a/arch/arm/boot/dts/bcm947189acdbmr.dts
+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -25,17 +25,17 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
@@ -44,13 +44,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm947622.dts b/arch/arm/boot/dts/bcm947622.dts
new file mode 100644
index 000000000000..93b8ce22678d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm947622.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm47622.dtsi"
+
+/ {
+	model = "Broadcom BCM947622 Reference Board";
+	compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
index 52feca0fb906..4fe3b3653376 100644
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Enterprise Router (BCM953012ER)";
-	compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
+	compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708";
 
 	memory@0 {
 		device_type = "memory";
@@ -47,13 +47,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts
index 9140be7ec053..b070b69466bd 100644
--- a/arch/arm/boot/dts/bcm953012hr.dts
+++ b/arch/arm/boot/dts/bcm953012hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar HR (BCM953012HR)";
-	compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
+	compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708";
 
 	aliases {
 		ethernet0 = &gmac0;
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
index 046c59fb4846..f1e6bcaa1edd 100644
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -36,7 +36,7 @@
 
 / {
 	model = "NorthStar SVK (BCM953012K)";
-	compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
+	compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708";
 
 	aliases {
 		serial0 = &uart0;
@@ -49,8 +49,8 @@
 	};
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
index b4a1392bd5a6..dda3e11b711f 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -60,8 +60,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts
index 3378683321d3..ea3c6b88b313 100644
--- a/arch/arm/boot/dts/bcm958305k.dts
+++ b/arch/arm/boot/dts/bcm958305k.dts
@@ -68,8 +68,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index 5443fc079e6e..15f023656df0 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958522ER)";
-	compatible = "brcm,bcm58522", "brcm,nsp";
+	compatible = "brcm,bcm958522er", "brcm,bcm58522", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -134,8 +134,9 @@
 };
 
 &qspi {
+	status = "okay";
 	bspi-sel = <0>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index e1e3c26cef19..9b9c225a1fb3 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958525ER)";
-	compatible = "brcm,bcm58525", "brcm,nsp";
+	compatible = "brcm,bcm958525er", "brcm,bcm58525", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -134,8 +134,9 @@
 };
 
 &qspi {
+	status = "okay";
 	bspi-sel = <0>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index f161ba2e7e5e..ca9311452739 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus XMC (BCM958525xmc)";
-	compatible = "brcm,bcm58525", "brcm,nsp";
+	compatible = "brcm,bcm958525xmc", "brcm,bcm58525", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -90,8 +90,8 @@
 	};
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -150,8 +150,9 @@
 };
 
 &qspi {
+	status = "okay";
 	bspi-sel = <0>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index 83cb877d63db..9db3c851451a 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958622HR)";
-	compatible = "brcm,bcm58622", "brcm,nsp";
+	compatible = "brcm,bcm958622hr", "brcm,bcm58622", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -78,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -138,8 +138,9 @@
 };
 
 &qspi {
+	status = "okay";
 	bspi-sel = <0>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index 4e106ce1384a..32786e7c4e12 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958623HR)";
-	compatible = "brcm,bcm58623", "brcm,nsp";
+	compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -78,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -142,8 +142,9 @@
 };
 
 &qspi {
+	status = "okay";
 	bspi-sel = <0>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
new file mode 100644
index 000000000000..c54451dde6dd
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+	keys {
+		compatible = "gpio-keys-polled";
+		autorepeat;
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* green:wan1-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* green:wan1-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			/* green:wan2-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			/* green:wan2-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <3>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			/* amber:power */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			/* white:status */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&axi {
+	mdio-mux@3f1c0 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		reg = <0x3f1c0 0x4>;
+		mux-mask = <0x2000>;
+		mdio-parent-bus = <&mdio_ext>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port6: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port7: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port8: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port9: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port10: phy@4 {
+				reg = <4>;
+			};
+
+			switch@10 {
+				compatible = "qca,qca8337";
+				reg = <0x10>;
+				dsa,member = <1 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						ethernet = <&sgmii1>;
+						phy-mode = "sgmii";
+						qca,sgmii-enable-pll;
+						qca,sgmii-txclk-falling-edge;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan8";
+						phy-handle = <&phy_port6>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan9";
+						phy-handle = <&phy_port7>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan10";
+						phy-handle = <&phy_port8>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan11";
+						phy-handle = <&phy_port9>;
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "lan12";
+						phy-handle = <&phy_port10>;
+					};
+				};
+			};
+		};
+
+		mdio-mii@2000 {
+			reg = <0x2000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+
+			switch@10 {
+				compatible = "qca,qca8337";
+				reg = <0x10>;
+				dsa,member = <2 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						ethernet = <&sgmii0>;
+						phy-mode = "sgmii";
+						qca,sgmii-enable-pll;
+						qca,sgmii-txclk-falling-edge;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan3";
+						phy-handle = <&phy_port1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan4";
+						phy-handle = <&phy_port2>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan5";
+						phy-handle = <&phy_port3>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan6";
+						phy-handle = <&phy_port4>;
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "lan7";
+						phy-handle = <&phy_port5>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+	dsa,member = <0 0>;
+
+	ports {
+		port@0 {
+			label = "wan1";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "wan2";
+			reg = <1>;
+		};
+
+		sgmii0: port@4 {
+			label = "sw0";
+			reg = <4>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		sgmii1: port@5 {
+			label = "sw1";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
new file mode 100644
index 000000000000..1830844c8404
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+
+	keys {
+		compatible = "gpio-keys-polled";
+		autorepeat;
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* green:lan1-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* green:lan1-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			/* green:lan2-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			/* green:lan2-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <3>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 20 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			/* green:lan3-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			/* green:lan3-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <5>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			/* green:lan4-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			/* green:lan4-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <7>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+		};
+
+		led-8 {
+			/* green:wan-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <8>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 30 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			/* green:wan-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <9>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 29 GPIO_ACTIVE_LOW>;
+		};
+
+		led-a {
+			/* amber:power */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-b {
+			/* white:status */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "lan2";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "lan3";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "lan4";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "wan";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
new file mode 100644
index 000000000000..9944566c1195
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64(A0)";
+	compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts
new file mode 100644
index 000000000000..06939438e874
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64";
+	compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
new file mode 100644
index 000000000000..112fddb1eed8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64W(A0)";
+	compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
new file mode 100644
index 000000000000..de2e367c3e78
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64W";
+	compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts
new file mode 100644
index 000000000000..d1b684dcdbfa
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+	model = "Cisco Meraki MX65";
+	compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
new file mode 100644
index 000000000000..a2165aba3676
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65W.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+	model = "Cisco Meraki MX65W";
+	compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
new file mode 100644
index 000000000000..b0854d881ac6
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			pwms = <&pwm 1 50000>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			pwms = <&pwm 2 50000>;
+			max-brightness = <255>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			pwms = <&pwm 3 50000>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&amac2 {
+	status = "okay";
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mac_address: mac-address@66 {
+			reg = <0x66 0x6>;
+		};
+	};
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "shmoo";
+			reg = <0x80000 0x80000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "bootkernel1";
+			reg = <0x100000 0x300000>;
+		};
+
+		partition@400000 {
+			label = "nvram";
+			reg = <0x400000 0x100000>;
+		};
+
+		partition@500000 {
+			label = "bootkernel2";
+			reg = <0x500000 0x300000>;
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x3f700000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_leds>;
+
+	pwm_leds: pwm_leds {
+		function = "pwm";
+		groups = "pwm1_grp", "pwm2_grp", "pwm3_grp";
+	};
+};
+
+&pwm {
+	status = "okay";
+	#pwm-cells = <2>;
+};
+
+&uart0 {
+	clock-frequency = <62500000>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index cda6cc281e18..74263d98de73 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958625HR)";
-	compatible = "brcm,bcm58625", "brcm,nsp";
+	compatible = "brcm,bcm958625hr", "brcm,bcm58625", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -89,8 +89,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -149,8 +149,9 @@
 };
 
 &qspi {
+	status = "okay";
 	bspi-sel = <0>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index ffbff0014c65..69ebc7a913a7 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -36,7 +36,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958625K)";
-	compatible = "brcm,bcm58625", "brcm,nsp";
+	compatible = "brcm,bcm958625k", "brcm,bcm58625", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -68,8 +68,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -153,8 +153,9 @@
 };
 
 &qspi {
+	status = "okay";
 	bspi-sel = <0>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm963138.dts b/arch/arm/boot/dts/bcm963138.dts
new file mode 100644
index 000000000000..1b405c249213
--- /dev/null
+++ b/arch/arm/boot/dts/bcm963138.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+	model = "Broadcom BCM963138 Reference Board";
+	compatible = "brcm,bcm963138", "brcm,bcm63138", "brcm,bcmbca";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
index 5b177274f182..b5af61853a07 100644
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ b/arch/arm/boot/dts/bcm963138dvt.dts
@@ -8,7 +8,7 @@
 #include "bcm63138.dtsi"
 
 / {
-	compatible = "brcm,BCM963138DVT", "brcm,bcm63138";
+	compatible = "brcm,BCM963138DVT", "brcm,bcm63138", "brcm,bcmbca";
 	model = "Broadcom BCM963138DVT";
 
 	chosen {
@@ -31,10 +31,10 @@
 	status = "okay";
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@0 {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-ecc-strength = <4>;
@@ -50,3 +50,7 @@
 &sata_phy {
 	status = "okay";
 };
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963148.dts b/arch/arm/boot/dts/bcm963148.dts
new file mode 100644
index 000000000000..1f5d6d783f09
--- /dev/null
+++ b/arch/arm/boot/dts/bcm963148.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63148.dtsi"
+
+/ {
+	model = "Broadcom BCM963148 Reference Board";
+	compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963178.dts b/arch/arm/boot/dts/bcm963178.dts
new file mode 100644
index 000000000000..d036e99dd8d1
--- /dev/null
+++ b/arch/arm/boot/dts/bcm963178.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63178.dtsi"
+
+/ {
+	model = "Broadcom BCM963178 Reference Board";
+	compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96756.dts b/arch/arm/boot/dts/bcm96756.dts
new file mode 100644
index 000000000000..8b104f3fb14a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm96756.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6756.dtsi"
+
+/ {
+	model = "Broadcom BCM96756 Reference Board";
+	compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96846.dts b/arch/arm/boot/dts/bcm96846.dts
new file mode 100644
index 000000000000..55852c229608
--- /dev/null
+++ b/arch/arm/boot/dts/bcm96846.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+
+/ {
+	model = "Broadcom BCM96846 Reference Board";
+	compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96855.dts b/arch/arm/boot/dts/bcm96855.dts
new file mode 100644
index 000000000000..2ad880af2104
--- /dev/null
+++ b/arch/arm/boot/dts/bcm96855.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6855.dtsi"
+
+/ {
+	model = "Broadcom BCM96855 Reference Board";
+	compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96878.dts b/arch/arm/boot/dts/bcm96878.dts
new file mode 100644
index 000000000000..b7af8ade7a9d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm96878.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6878.dtsi"
+
+/ {
+	model = "Broadcom BCM96878 Reference Board";
+	compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index 3fd39c479a3c..e96bc3f2d5cf 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM988312HR)";
-	compatible = "brcm,bcm88312", "brcm,nsp";
+	compatible = "brcm,bcm988312hr", "brcm,bcm88312", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -58,6 +58,10 @@
 
 /* USB 3 support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -74,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -134,8 +138,9 @@
 };
 
 &qspi {
+	status = "okay";
 	bspi-sel = <0>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 598a46f96a82..6edaefa617a5 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -581,7 +581,7 @@
 				status = "disabled";
 			};
 
-			uart0: uart@9000 {
+			uart0: serial@9000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x9000 0x100>;
 				interrupts = <8>;
@@ -592,7 +592,7 @@
 				status = "disabled";
 			};
 
-			uart1: uart@a000 {
+			uart1: serial@a000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0xa000 0x100>;
 				interrupts = <9>;
diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi
index d2e8f36f8c60..227675fbe820 100644
--- a/arch/arm/boot/dts/cx92755.dtsi
+++ b/arch/arm/boot/dts/cx92755.dtsi
@@ -107,7 +107,7 @@
 		reg = <0xf00003a0 0x10>;
 	};
 
-	uart0: uart@f0000740 {
+	uart0: serial@f0000740 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000740 0x20>;
 		clocks = <&main_clk>;
@@ -115,7 +115,7 @@
 		status = "disabled";
 	};
 
-	uart1: uart@f0000760 {
+	uart1: serial@f0000760 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000760 0x20>;
 		clocks = <&main_clk>;
@@ -123,7 +123,7 @@
 		status = "disabled";
 	};
 
-	uart2: uart@f0000780 {
+	uart2: serial@f0000780 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000780 0x20>;
 		clocks = <&main_clk>;
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 87c517d65f62..0ca849885d1f 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -52,15 +52,15 @@
 		enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
 
 		panel-info {
-			ac-bias		= <255>;
-			ac-bias-intrpt	= <0>;
-			dma-burst-sz	= <16>;
-			bpp		= <16>;
-			fdd		= <0x80>;
-			sync-edge	= <0>;
-			sync-ctrl	= <1>;
-			raster-order	= <0>;
-			fifo-th		= <0>;
+			ac-bias = <255>;
+			ac-bias-intrpt = <0>;
+			dma-burst-sz = <16>;
+			bpp = <16>;
+			fdd = <0x80>;
+			sync-edge = <0>;
+			sync-ctrl = <1>;
+			raster-order = <0>;
+			fifo-th = <0>;
 		};
 
 		display-timings {
@@ -278,7 +278,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
@@ -415,7 +415,7 @@
 &aemif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_pins>;
-	status = "ok";
+	status = "okay";
 	cs3 {
 		#address-cells = <2>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 7cf31b6e48b7..e46e4d22db39 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -419,7 +419,7 @@
 		edma0: edma@0 {
 			compatible = "ti,edma3-tpcc";
 			/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
-			reg =	<0x0 0x8000>;
+			reg = <0x0 0x8000>;
 			reg-names = "edma3_cc";
 			interrupts = <11 12>;
 			interrupt-names = "edma3_ccint", "edma3_ccerrint";
@@ -430,14 +430,14 @@
 		};
 		edma0_tptc0: tptc@8000 {
 			compatible = "ti,edma3-tptc";
-			reg =	<0x8000 0x400>;
+			reg = <0x8000 0x400>;
 			interrupts = <13>;
 			interrupt-names = "edm3_tcerrint";
 			power-domains = <&psc0 1>;
 		};
 		edma0_tptc1: tptc@8400 {
 			compatible = "ti,edma3-tptc";
-			reg =	<0x8400 0x400>;
+			reg = <0x8400 0x400>;
 			interrupts = <32>;
 			interrupt-names = "edm3_tcerrint";
 			power-domains = <&psc0 2>;
@@ -445,7 +445,7 @@
 		edma1: edma@230000 {
 			compatible = "ti,edma3-tpcc";
 			/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
-			reg =	<0x230000 0x8000>;
+			reg = <0x230000 0x8000>;
 			reg-names = "edma3_cc";
 			interrupts = <93 94>;
 			interrupt-names = "edma3_ccint", "edma3_ccerrint";
@@ -456,7 +456,7 @@
 		};
 		edma1_tptc0: tptc@238000 {
 			compatible = "ti,edma3-tptc";
-			reg =	<0x238000 0x400>;
+			reg = <0x238000 0x400>;
 			interrupts = <95>;
 			interrupt-names = "edm3_tcerrint";
 			power-domains = <&psc1 21>;
@@ -574,8 +574,7 @@
 			status = "disabled";
 		};
 		ehrpwm0: pwm@300000 {
-			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
-				     "ti,am33xx-ehrpwm";
+			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x300000 0x2000>;
 			clocks = <&psc1 17>, <&ehrpwm_tbclk>;
@@ -584,8 +583,7 @@
 			status = "disabled";
 		};
 		ehrpwm1: pwm@302000 {
-			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
-				     "ti,am33xx-ehrpwm";
+			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x302000 0x2000>;
 			clocks = <&psc1 17>, <&ehrpwm_tbclk>;
@@ -593,9 +591,8 @@
 			power-domains = <&psc1 17>;
 			status = "disabled";
 		};
-		ecap0: ecap@306000 {
-			compatible = "ti,da850-ecap", "ti,am3352-ecap",
-				     "ti,am33xx-ecap";
+		ecap0: pwm@306000 {
+			compatible = "ti,da850-ecap", "ti,am3352-ecap";
 			#pwm-cells = <3>;
 			reg = <0x306000 0x80>;
 			clocks = <&psc1 20>;
@@ -603,9 +600,8 @@
 			power-domains = <&psc1 20>;
 			status = "disabled";
 		};
-		ecap1: ecap@307000 {
-			compatible = "ti,da850-ecap", "ti,am3352-ecap",
-				     "ti,am33xx-ecap";
+		ecap1: pwm@307000 {
+			compatible = "ti,da850-ecap", "ti,am3352-ecap";
 			#pwm-cells = <3>;
 			reg = <0x307000 0x80>;
 			clocks = <&psc1 20>;
@@ -613,9 +609,8 @@
 			power-domains = <&psc1 20>;
 			status = "disabled";
 		};
-		ecap2: ecap@308000 {
-			compatible = "ti,da850-ecap", "ti,am3352-ecap",
-				     "ti,am33xx-ecap";
+		ecap2: pwm@308000 {
+			compatible = "ti,da850-ecap", "ti,am3352-ecap";
 			#pwm-cells = <3>;
 			reg = <0x308000 0x80>;
 			clocks = <&psc1 20>;
@@ -677,14 +672,16 @@
 
 			cppi41dma: dma-controller@201000 {
 				compatible = "ti,da830-cppi41";
-				reg =  <0x201000 0x1000
+				reg = <0x201000 0x1000
 					0x202000 0x1000
 					0x204000 0x4000>;
 				reg-names = "controller",
 					    "scheduler", "queuemgr";
 				interrupts = <58>;
 				#dma-cells = <2>;
+				/* For backwards compatibility: */
 				#dma-channels = <4>;
+				dma-channels = <4>;
 				power-domains = <&psc1 1>;
 				status = "okay";
 			};
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
index 91d1018ab75f..fe3f9a970b18 100644
--- a/arch/arm/boot/dts/dm8148-evm.dts
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -51,7 +51,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>; /* termcount */
-		linux,mtd-name= "micron,mt29f2g16aadwp";
+		linux,mtd-name = "micron,mt29f2g16aadwp";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,nand-ecc-opt = "bch8";
@@ -80,19 +80,19 @@
 			label = "X-Loader";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x80000 0x1c0000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x240000 0x40000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x280000 0x500000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x780000 0xf880000>;
 		};
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index 7702e048e110..a8cd724ce4bc 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -1,8 +1,4 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
 
 #include <dt-bindings/bus/ti-sysc.h>
 #include <dt-bindings/clock/dm814.h>
@@ -167,8 +163,11 @@
 				interrupts = <17>;
 				interrupt-names = "glue";
 				#dma-cells = <2>;
+				/* For backwards compatibility: */
 				#dma-channels = <30>;
+				dma-channels = <30>;
 				#dma-requests = <256>;
+				dma-requests = <256>;
 			};
 		};
 
@@ -334,7 +333,7 @@
 				};
 			};
 
-			uart1: uart@20000 {
+			uart1: serial@20000 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				ti,hwmods = "uart1";
 				reg = <0x20000 0x2000>;
@@ -344,7 +343,7 @@
 				dma-names = "tx", "rx";
 			};
 
-			uart2: uart@22000 {
+			uart2: serial@22000 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				ti,hwmods = "uart2";
 				reg = <0x22000 0x2000>;
@@ -354,7 +353,7 @@
 				dma-names = "tx", "rx";
 			};
 
-			uart3: uart@24000 {
+			uart3: serial@24000 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				ti,hwmods = "uart3";
 				reg = <0x24000 0x2000>;
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index cf05d532db65..244a957f9ba3 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -119,7 +119,7 @@
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
-		linux,mtd-name= "micron,mt29f2g16aadwp";
+		linux,mtd-name = "micron,mt29f2g16aadwp";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
@@ -154,19 +154,19 @@
 			label = "X-Loader";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x80000 0x1c0000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x240000 0x40000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x280000 0x500000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x780000 0xf880000>;
 		};
@@ -177,7 +177,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi1_pins>;
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "w25x32";
 		spi-max-frequency = <48000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 3551a64963f8..b68686f0643b 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -1,8 +1,4 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
 
 #include <dt-bindings/bus/ti-sysc.h>
 #include <dt-bindings/clock/dm816.h>
@@ -314,8 +310,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <70>;
-			dmas = <&edma 58 0 &edma 59 0>;
-			dma-names = "tx", "rx";
 		};
 
 		i2c2: i2c@4802a000 {
@@ -325,8 +319,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <71>;
-			dmas = <&edma 60 0 &edma 61 0>;
-			dma-names = "tx", "rx";
 		};
 
 		intc: interrupt-controller@48200000 {
@@ -351,7 +343,7 @@
 			#mbox-cells = <1>;
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <12>;
-			mbox_dsp: mbox_dsp {
+			mbox_dsp: mbox-dsp {
 				ti,mbox-tx = <3 0 0>;
 				ti,mbox-rx = <0 0 0>;
 			};
@@ -530,7 +522,7 @@
 			ti,timer-pwm;
 		};
 
-		uart1: uart@48020000 {
+		uart1: serial@48020000 {
 			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			reg = <0x48020000 0x2000>;
@@ -540,7 +532,7 @@
 			dma-names = "tx", "rx";
 		};
 
-		uart2: uart@48022000 {
+		uart2: serial@48022000 {
 			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart2";
 			reg = <0x48022000 0x2000>;
@@ -550,7 +542,7 @@
 			dma-names = "tx", "rx";
 		};
 
-		uart3: uart@48024000 {
+		uart3: serial@48024000 {
 			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart3";
 			reg = <0x48024000 0x2000>;
@@ -659,8 +651,11 @@
 				interrupts = <17>;
 				interrupt-names = "glue";
 				#dma-cells = <2>;
+				/* For backwards compatibility: */
 				#dma-channels = <30>;
+				dma-channels = <30>;
 				#dma-requests = <256>;
+				dma-requests = <256>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi
index 9b9dfbe07be4..1082fdfbfe60 100644
--- a/arch/arm/boot/dts/dove-cm-a510.dtsi
+++ b/arch/arm/boot/dts/dove-cm-a510.dtsi
@@ -101,7 +101,7 @@
 		pinctrl-0 = <&pmx_nand_gpo>;
 		pinctrl-names = "default";
 
-		system {
+		led-system {
 			label = "cm-a510:system:green";
 			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
@@ -124,9 +124,17 @@
 };
 
 /* Optional RTL8211D GbE PHY on SMI address 0x03 */
-&ethphy {
-	reg = <3>;
-	status = "disabled";
+&mdio {
+	ethphy: ethernet-phy@3 {
+		reg = <3>;
+		status = "disabled";
+	};
+};
+
+&eth {
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
 };
 
 &i2c0 {
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 3e1584e787ae..dbba0c8cdab1 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -21,7 +21,7 @@
 		pinctrl-0 = <&pmx_gpio_18>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			label = "Power";
 			gpios = <&gpio0 18 1>;
 			default-state = "keep";
@@ -72,11 +72,18 @@
 &uart0 { status = "okay"; };
 &sata0 { status = "okay"; };
 &mdio { status = "okay"; };
-&eth { status = "okay"; };
+&eth {
+	status = "okay";
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
 
-&ethphy {
-	compatible = "marvell,88e1310";
-	reg = <1>;
+&mdio {
+	ethphy: ethernet-phy@1 {
+		compatible = "marvell,88e1310";
+		reg = <1>;
+	};
 };
 
 &gpu {
@@ -127,7 +134,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash Winbond W25Q32BV */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,w25q32";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts
index 273f12ca2512..79ee2b32409d 100644
--- a/arch/arm/boot/dts/dove-d2plug.dts
+++ b/arch/arm/boot/dts/dove-d2plug.dts
@@ -21,17 +21,17 @@
 		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
 		pinctrl-names = "default";
 
-		wlan-ap {
+		led-wlan-ap {
 			label = "wlan-ap";
 			gpios = <&gpio0 0 1>;
 		};
 
-		wlan-act {
+		led-wlan-act {
 			label = "wlan-act";
 			gpios = <&gpio0 1 1>;
 		};
 
-		bluetooth-act {
+		led-bluetooth-act {
 			label = "bt-act";
 			gpios = <&gpio0 2 1>;
 		};
@@ -62,7 +62,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash Macronix MX25L3205D */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,m25l3205d";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts
index 826026c28f90..5aa5d4a7d51d 100644
--- a/arch/arm/boot/dts/dove-d3plug.dts
+++ b/arch/arm/boot/dts/dove-d3plug.dts
@@ -21,17 +21,17 @@
 		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
 		pinctrl-names = "default";
 
-		wlan-act {
+		led-wlan-act {
 			label = "wlan-act";
 			gpios = <&gpio0 0 1>;
 		};
 
-		wlan-ap {
+		led-wlan-ap {
 			label = "wlan-ap";
 			gpios = <&gpio0 1 1>;
 		};
 
-		status {
+		led-status {
 			label = "status";
 			gpios = <&gpio0 2 1>;
 		};
@@ -79,7 +79,7 @@
 	status = "okay";
 
 	/* spi0.0: 2M Flash Macronix MX25L1605D */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,m25l1605d";
 		spi-max-frequency = <86000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts
index 1754a62e014e..c1912dc6bfc3 100644
--- a/arch/arm/boot/dts/dove-dove-db.dts
+++ b/arch/arm/boot/dts/dove-dove-db.dts
@@ -27,7 +27,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,m25p32";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 89e0bdaf3a85..062c86361640 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -122,14 +122,24 @@
 				bus-range = <0x00 0xff>;
 
 				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 16>;
+				interrupt-names = "intx", "error";
+				interrupts = <16>, <15>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie1: pcie@2 {
 				device_type = "pci";
 				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				clocks = <&gate_clk 5>;
 				marvell,pcie-port = <1>;
@@ -141,8 +151,18 @@
 				bus-range = <0x00 0xff>;
 
 				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 18>;
+				interrupt-names = "intx", "error";
+				interrupts = <18>, <17>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
@@ -362,7 +382,6 @@
 					interrupts = <29>;
 					/* overwrite MAC address in bootloader */
 					local-mac-address = [00 00 00 00 00 00];
-					phy-handle = <&ethphy>;
 				};
 			};
 
@@ -374,10 +393,6 @@
 				interrupts = <30>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
-
-				ethphy: ethernet-phy {
-					/* set phy address in board file */
-				};
 			};
 
 			sdio0: sdio-host@92000 {
@@ -407,7 +422,7 @@
 				clocks = <&gate_clk 3>;
 				clock-names = "sata";
 				#phy-cells = <0>;
-				status = "ok";
+				status = "okay";
 			};
 
 			audio0: audio-controller@b0000 {
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
index c16e183822be..577114c4c20a 100644
--- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -51,7 +51,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>; /* termcount */
-		linux,mtd-name= "micron,mt29f2g16aadwp";
+		linux,mtd-name = "micron,mt29f2g16aadwp";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/dra62x.dtsi b/arch/arm/boot/dts/dra62x.dtsi
index cc4878aaa8ea..cfefa670515c 100644
--- a/arch/arm/boot/dts/dra62x.dtsi
+++ b/arch/arm/boot/dts/dra62x.dtsi
@@ -1,8 +1,4 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
 
 #include "dm814x.dtsi"
 
diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
index e75569383dd8..747ff0db90c7 100644
--- a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
+++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for DRA7x SoC DSPEVE thermal
  *
  * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/thermal/thermal.h>
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
index 0f71a9f37a72..4cdffd6db740 100644
--- a/arch/arm/boot/dts/dra7-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
@@ -135,7 +135,7 @@
 	status = "okay";
 
 	spi-max-frequency = <76800000>;
-	m25p80@0 {
+	flash@0 {
 		compatible = "s25fl256s1";
 		spi-max-frequency = <76800000>;
 		reg = <0>;
@@ -151,7 +151,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.SPL";
-			reg = <0x00000000 0x000010000>;
+			reg = <0x00000000 0x00010000>;
 		};
 		partition@1 {
 			label = "QSPI.SPL.backup1";
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 38530dbb89a0..8cbcf55a5a33 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -319,7 +319,7 @@
 	};
 
 	pcf_lcd: gpio@20 {
-		compatible = "ti,pcf8575", "nxp,pcf8575";
+		compatible = "nxp,pcf8575";
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
@@ -330,7 +330,7 @@
 	};
 
 	pcf_gpio_21: gpio@21 {
-		compatible = "ti,pcf8575", "nxp,pcf8575";
+		compatible = "nxp,pcf8575";
 		reg = <0x21>;
 		lines-initial-states = <0x1408>;
 		gpio-controller;
@@ -362,11 +362,11 @@
 	clock-frequency = <400000>;
 
 	pcf_hdmi: gpio@26 {
-		compatible = "ti,pcf8575", "nxp,pcf8575";
+		compatible = "nxp,pcf8575";
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
@@ -483,7 +483,7 @@
 		#size-cells = <1>;
 		partition@0 {
 			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
+			reg = <0x00000000 0x00020000>;
 		};
 		partition@1 {
 			label = "NAND.SPL.backup1";
diff --git a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
index a25749a1c365..a5bdc6431d8d 100644
--- a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
+++ b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
@@ -5,17 +5,17 @@
 
 &mailbox5 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		status = "okay";
 	};
 };
 
 &mailbox6 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/dra7-iva-thermal.dtsi b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
index a7077321613f..0a31313065df 100644
--- a/arch/arm/boot/dts/dra7-iva-thermal.dtsi
+++ b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for DRA7x SoC IVA thermal
  *
  * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/thermal/thermal.h>
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 3bf90d9e3335..5733e3a4ea8e 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1,5 +1,8 @@
 &l4_cfg {						/* 0x4a000000 */
-	compatible = "ti,dra7-l4-cfg", "simple-bus";
+	compatible = "ti,dra7-l4-cfg", "simple-pm-bus";
+	power-domains = <&prm_coreaon>;
+	clocks = <&l4cfg_clkctrl DRA7_L4CFG_L4_CFG_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x4a000000 0x800>,
 	      <0x4a000800 0x800>,
 	      <0x4a001000 0x1000>;
@@ -11,7 +14,7 @@
 		 <0x00200000 0x4a200000 0x100000>;	/* segment 2 */
 
 	segment@0 {					/* 0x4a000000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -493,7 +496,7 @@
 	};
 
 	segment@100000 {					/* 0x4a100000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00002000 0x00102000 0x001000>,	/* ap 27 */
@@ -572,11 +575,33 @@
 		};
 
 		target-module@40000 {			/* 0x4a140000, ap 31 06.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x400fc 4>,
+			      <0x41100 4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			power-domains = <&prm_l3init>;
+			clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 0>;
+			clock-names = "fck";
 			#size-cells = <1>;
+			#address-cells = <1>;
 			ranges = <0x0 0x40000 0x10000>;
+
+			sata: sata@0 {
+				compatible = "snps,dwc-ahci";
+				reg = <0 0x1100>, <0x1100 0x8>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&sata_phy>;
+				phy-names = "sata-phy";
+				clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
+				ports-implemented = <0x1>;
+			};
 		};
 
 		target-module@51000 {			/* 0x4a151000, ap 33 50.0 */
@@ -789,7 +814,7 @@
 	};
 
 	segment@200000 {					/* 0x4a200000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00018000 0x00218000 0x001000>,	/* ap 43 */
@@ -1006,7 +1031,10 @@
 };
 
 &l4_per1 {						/* 0x48000000 */
-	compatible = "ti,dra7-l4-per1", "simple-bus";
+	compatible = "ti,dra7-l4-per1", "simple-pm-bus";
+	power-domains = <&prm_l4per>;
+	clocks = <&l4per_clkctrl DRA7_L4PER_L4_PER1_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x48000000 0x800>,
 	      <0x48000800 0x800>,
 	      <0x48001000 0x400>,
@@ -1020,7 +1048,7 @@
 		 <0x00200000 0x48200000 0x200000>;	/* segment 1 */
 
 	segment@0 {					/* 0x48000000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -1131,7 +1159,7 @@
 			ranges = <0x0 0x20000 0x1000>;
 
 			uart3: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -1168,7 +1196,7 @@
 			};
 		};
 
-		target-module@34000 {			/* 0x48034000, ap 7 46.0 */
+		timer3_target: target-module@34000 {	/* 0x48034000, ap 7 46.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x34000 0x4>,
 			      <0x34010 0x4>;
@@ -1195,7 +1223,7 @@
 			};
 		};
 
-		target-module@36000 {			/* 0x48036000, ap 9 4e.0 */
+		timer4_target: target-module@36000 {	/* 0x48036000, ap 9 4e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x36000 0x4>,
 			      <0x36010 0x4>;
@@ -1315,7 +1343,7 @@
 			};
 		};
 
-		target-module@55000 {			/* 0x48055000, ap 13 0e.0 */
+		gpio2_target: target-module@55000 {		/* 0x48055000, ap 13 0e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x55000 0x4>,
 			      <0x55010 0x4>,
@@ -1348,7 +1376,7 @@
 			};
 		};
 
-		target-module@57000 {			/* 0x48057000, ap 15 06.0 */
+		gpio3_target: target-module@57000 {		/* 0x48057000, ap 15 06.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x57000 0x4>,
 			      <0x57010 0x4>,
@@ -1534,7 +1562,7 @@
 			ranges = <0x0 0x66000 0x1000>;
 
 			uart5: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -1566,7 +1594,7 @@
 			ranges = <0x0 0x68000 0x1000>;
 
 			uart6: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -1598,7 +1626,7 @@
 			ranges = <0x0 0x6a000 0x1000>;
 
 			uart1: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -1630,7 +1658,7 @@
 			ranges = <0x0 0x6c000 0x1000>;
 
 			uart2: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -1662,7 +1690,7 @@
 			ranges = <0x0 0x6e000 0x1000>;
 
 			uart4: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -2269,14 +2297,17 @@
 	};
 
 	segment@200000 {					/* 0x48200000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
 };
 
 &l4_per2 {						/* 0x48400000 */
-	compatible = "ti,dra7-l4-per2", "simple-bus";
+	compatible = "ti,dra7-l4-per2", "simple-pm-bus";
+	power-domains = <&prm_l4per>;
+	clocks = <&l4per2_clkctrl DRA7_L4PER2_L4_PER2_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x48400000 0x800>,
 	      <0x48400800 0x800>,
 	      <0x48401000 0x400>,
@@ -2296,7 +2327,7 @@
 		 <0x48454000 0x48454000 0x400000>;	/* L3 data port */
 
 	segment@0 {					/* 0x48400000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -2393,7 +2424,7 @@
 			ranges = <0x0 0x20000 0x1000>;
 
 			uart7: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -2423,7 +2454,7 @@
 			ranges = <0x0 0x22000 0x1000>;
 
 			uart8: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -2453,7 +2484,7 @@
 			ranges = <0x0 0x24000 0x1000>;
 
 			uart9: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -2530,7 +2561,7 @@
 				status = "disabled";
 				ranges = <0 0 0x1000>;
 
-				ecap0: ecap@100 {
+				ecap0: pwm@100 {
 					compatible = "ti,dra746-ecap",
 						     "ti,am3352-ecap";
 					#pwm-cells = <3>;
@@ -2576,7 +2607,7 @@
 				status = "disabled";
 				ranges = <0 0 0x1000>;
 
-				ecap1: ecap@100 {
+				ecap1: pwm@100 {
 					compatible = "ti,dra746-ecap",
 						     "ti,am3352-ecap";
 					#pwm-cells = <3>;
@@ -2622,7 +2653,7 @@
 				status = "disabled";
 				ranges = <0 0 0x1000>;
 
-				ecap2: ecap@100 {
+				ecap2: pwm@100 {
 					compatible = "ti,dra746-ecap",
 						     "ti,am3352-ecap";
 					#pwm-cells = <3>;
@@ -3094,7 +3125,10 @@
 };
 
 &l4_per3 {						/* 0x48800000 */
-	compatible = "ti,dra7-l4-per3", "simple-bus";
+	compatible = "ti,dra7-l4-per3", "simple-pm-bus";
+	power-domains = <&prm_l4per>;
+	clocks = <&l4per3_clkctrl DRA7_L4PER3_L4_PER3_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x48800000 0x800>,
 	      <0x48800800 0x800>,
 	      <0x48801000 0x400>,
@@ -3106,7 +3140,7 @@
 	ranges = <0x00000000 0x48800000 0x200000>;	/* segment 0 */
 
 	segment@0 {					/* 0x48800000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -3448,8 +3482,7 @@
 				ti,timer-pwm;
 			};
 		};
-
-		target-module@2c000 {			/* 0x4882c000, ap 17 02.0 */
+		timer15_target: target-module@2c000 {	/* 0x4882c000, ap 17 02.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x2c000 0x4>,
 			      <0x2c010 0x4>;
@@ -3477,7 +3510,7 @@
 			};
 		};
 
-		target-module@2e000 {			/* 0x4882e000, ap 19 14.0 */
+		timer16_target: target-module@2e000 {	/* 0x4882e000, ap 19 14.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x2e000 0x4>,
 			      <0x2e010 0x4>;
@@ -4095,28 +4128,6 @@
 			};
 		};
 
-		usb4_tm: target-module@140000 {		/* 0x48940000, ap 75 3c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x140000 0x4>,
-			      <0x140010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x140000 0x20000>;
-		};
-
 		target-module@170000 {			/* 0x48970000, ap 21 0a.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0x170010 0x4>;
@@ -4177,11 +4188,11 @@
 			reg = <0x1d0010 0x4>;
 			reg-names = "sysc";
 			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
+					<SYSC_IDLE_NO>;
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>;
+			power-domains = <&prm_vpe>;
 			clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
@@ -4205,7 +4216,10 @@
 };
 
 &l4_wkup {						/* 0x4ae00000 */
-	compatible = "ti,dra7-l4-wkup", "simple-bus";
+	compatible = "ti,dra7-l4-wkup", "simple-pm-bus";
+	power-domains = <&prm_wkupaon>;
+	clocks = <&wkupaon_clkctrl DRA7_WKUPAON_L4_WKUP_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x4ae00000 0x800>,
 	      <0x4ae00800 0x800>,
 	      <0x4ae01000 0x1000>;
@@ -4218,7 +4232,7 @@
 		 <0x00030000 0x4ae30000 0x010000>;	/* segment 3 */
 
 	segment@0 {					/* 0x4ae00000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -4295,7 +4309,7 @@
 	};
 
 	segment@10000 {					/* 0x4ae10000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
@@ -4405,7 +4419,7 @@
 	};
 
 	segment@20000 {					/* 0x4ae20000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
@@ -4493,7 +4507,7 @@
 			ranges = <0x0 0xb000 0x1000>;
 
 			uart10: serial@0 {
-				compatible = "ti,dra742-uart", "ti,omap4-uart";
+				compatible = "ti,dra742-uart";
 				reg = <0x0 0x100>;
 				interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 				clock-frequency = <48000000>;
@@ -4511,7 +4525,7 @@
 	};
 
 	segment@30000 {					/* 0x4ae30000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0000c000 0x0003c000 0x002000>,	/* ap 30 */
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index ce1194744f84..97ce0c4f1df7 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -46,6 +46,7 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
+		status = "disabled";	/* See ARM architected timer wrap erratum i940 */
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -125,18 +126,6 @@
 	};
 
 	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap5-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	/*
 	 * XXX: Use a flat representation of the SOC interconnect.
 	 * The real OMAP interconnect network is quite complex.
 	 * Since it will not bring real advantage to represent that in DT for
@@ -144,16 +133,22 @@
 	 * hierarchy.
 	 */
 	ocp: ocp {
-		compatible = "ti,dra7-l3-noc", "simple-bus";
+		compatible = "simple-pm-bus";
+		power-domains = <&prm_core>;
+		clocks = <&l3main1_clkctrl DRA7_L3MAIN1_L3_MAIN_1_CLKCTRL 0>,
+			 <&l3instr_clkctrl DRA7_L3INSTR_L3_MAIN_2_CLKCTRL 0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0xc0000000>;
 		dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
-		ti,hwmods = "l3_main_1", "l3_main_2";
-		reg = <0x0 0x44000000 0x0 0x1000000>,
-		      <0x0 0x45000000 0x0 0x1000>;
-		interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		l3-noc@44000000 {
+			compatible = "ti,dra7-l3-noc";
+			reg = <0x44000000 0x1000>,
+			      <0x45000000 0x1000>;
+			interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
 		l4_cfg: interconnect@4a000000 {
 		};
@@ -161,36 +156,65 @@
 		};
 		l4_per1: interconnect@48000000 {
 		};
+
+		target-module@48210000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			power-domains = <&prm_mpu>;
+			clocks = <&mpu_clkctrl DRA7_MPU_MPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48210000 0x1f0000>;
+
+			mpu {
+				compatible = "ti,omap5-mpu";
+			};
+		};
+
 		l4_per2: interconnect@48400000 {
 		};
 		l4_per3: interconnect@48800000 {
 		};
 
-		axi@0 {
-			compatible = "simple-bus";
+		/*
+		 * Register access seems to have complex dependencies and also
+		 * seems to need an enabled phy. See the TRM chapter for "Table
+		 * 26-678. Main Sequence PCIe Controller Global Initialization"
+		 * and also dra7xx_pcie_probe().
+		 */
+		axi0: target-module@51000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			power-domains = <&prm_l3init>;
+			resets = <&prm_l3init 0>;
+			reset-names = "rstctrl";
+			clocks = <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 0>,
+				 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>,
+				 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>;
+			clock-names = "fck", "phy-clk", "phy-clk-div";
 			#size-cells = <1>;
 			#address-cells = <1>;
-			ranges = <0x51000000 0x51000000 0x3000
-				  0x0	     0x20000000 0x10000000>;
+			ranges = <0x51000000 0x51000000 0x3000>,
+				 <0x20000000 0x20000000 0x10000000>;
 			dma-ranges;
 			/**
 			 * To enable PCI endpoint mode, disable the pcie1_rc
 			 * node and enable pcie1_ep mode.
 			 */
 			pcie1_rc: pcie@51000000 {
-				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+				reg = <0x51000000 0x2000>,
+				      <0x51002000 0x14c>,
+				      <0x20001000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
 				interrupts = <0 232 0x4>, <0 233 0x4>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				device_type = "pci";
-				ranges = <0x81000000 0 0          0x03000 0 0x00010000
-					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+				ranges = <0x81000000 0 0x00000000 0x20003000 0 0x00010000>,
+					 <0x82000000 0 0x20013000 0x20013000 0 0x0ffed000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
 				linux,pci-domain = <0>;
-				ti,hwmods = "pcie1";
 				phys = <&pcie1_phy>;
 				phy-names = "pcie-phy0";
 				ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
@@ -209,13 +233,15 @@
 			};
 
 			pcie1_ep: pcie_ep@51000000 {
-				reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
+				reg = <0x51000000 0x28>,
+				      <0x51002000 0x14c>,
+				      <0x51001000 0x28>,
+				      <0x20001000 0x10000000>;
 				reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
 				interrupts = <0 232 0x4>;
 				num-lanes = <1>;
 				num-ib-windows = <4>;
 				num-ob-windows = <16>;
-				ti,hwmods = "pcie1";
 				phys = <&pcie1_phy>;
 				phy-names = "pcie-phy0";
 				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
@@ -224,28 +250,42 @@
 			};
 		};
 
-		axi@1 {
-			compatible = "simple-bus";
+		/*
+		 * Register access seems to have complex dependencies and also
+		 * seems to need an enabled phy. See the TRM chapter for "Table
+		 * 26-678. Main Sequence PCIe Controller Global Initialization"
+		 * and also dra7xx_pcie_probe().
+		 */
+		axi1: target-module@51800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			clocks = <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 0>,
+				 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>,
+				 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>;
+			clock-names = "fck", "phy-clk", "phy-clk-div";
+			power-domains = <&prm_l3init>;
+			resets = <&prm_l3init 1>;
+			reset-names = "rstctrl";
 			#size-cells = <1>;
 			#address-cells = <1>;
-			ranges = <0x51800000 0x51800000 0x3000
-				  0x0	     0x30000000 0x10000000>;
+			ranges = <0x51800000 0x51800000 0x3000>,
+				 <0x30000000 0x30000000 0x10000000>;
 			dma-ranges;
 			status = "disabled";
 			pcie2_rc: pcie@51800000 {
-				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
+				reg = <0x51800000 0x2000>,
+				      <0x51802000 0x14c>,
+				      <0x30001000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
 				interrupts = <0 355 0x4>, <0 356 0x4>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				device_type = "pci";
-				ranges = <0x81000000 0 0          0x03000 0 0x00010000
-					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+				ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>,
+					 <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>;
 				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
 				linux,pci-domain = <1>;
-				ti,hwmods = "pcie2";
 				phys = <&pcie2_phy>;
 				phy-names = "pcie-phy0";
 				interrupt-map-mask = <0 0 0 7>;
@@ -336,8 +376,15 @@
 
 		target-module@43300000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x43300000 0x4>;
-			reg-names = "rev";
+			reg = <0x43300000 0x4>,
+			      <0x43300010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
 			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
@@ -369,8 +416,15 @@
 
 		target-module@43400000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x43400000 0x4>;
-			reg-names = "rev";
+			reg = <0x43400000 0x4>,
+			      <0x43400010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
 			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
@@ -387,8 +441,15 @@
 
 		target-module@43500000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x43500000 0x4>;
-			reg-names = "rev";
+			reg = <0x43500000 0x4>,
+			      <0x43500010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
 			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
@@ -403,11 +464,23 @@
 			};
 		};
 
-		dmm@4e000000 {
-			compatible = "ti,omap5-dmm";
-			reg = <0x4e000000 0x800>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "dmm";
+		target-module@4e000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4e000000 0x4>,
+			      <0x4e000010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ranges = <0x0 0x4e000000 0x2000000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			dmm@0 {
+				compatible = "ti,omap5-dmm";
+				reg = <0 0x800>;
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		ipu1: ipu@58820000 {
@@ -694,32 +767,36 @@
 			>;
 		};
 
-		qspi: spi@4b300000 {
-			compatible = "ti,dra7xxx-qspi";
-			reg = <0x4b300000 0x100>,
-			      <0x5c000000 0x4000000>;
-			reg-names = "qspi_base", "qspi_mmap";
-			syscon-chipselects = <&scm_conf 0x558>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "qspi";
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
+		target-module@4b300000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4b300000 0x4>,
+			      <0x4b300010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 0>;
 			clock-names = "fck";
-			num-cs = <4>;
-			interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		/* OCP2SCP3 */
-		sata: sata@4a141100 {
-			compatible = "snps,dwc-ahci";
-			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
-			clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
-			ti,hwmods = "sata";
-			ports-implemented = <0x1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b300000 0x1000>,
+				 <0x5c000000 0x5c000000 0x4000000>;
+
+			qspi: spi@0 {
+				compatible = "ti,dra7xxx-qspi";
+				reg = <0 0x100>,
+				      <0x5c000000 0x4000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				syscon-chipselects = <&scm_conf 0x558>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
+				clock-names = "fck";
+				num-cs = <4>;
+				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
 		};
 
 		/* OCP2SCP1 */
@@ -798,10 +875,10 @@
 			      <0x58000014 4>;
 			reg-names = "rev", "syss";
 			ti,syss-mask = <1>;
-			clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 0>,
-				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
-				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>,
-				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 11>;
+			clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 0>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 11>;
 			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -835,7 +912,7 @@
 							 SYSC_OMAP2_SOFTRESET |
 							 SYSC_OMAP2_AUTOIDLE)>;
 					ti,syss-mask = <1>;
-					clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+					clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
 					clock-names = "fck";
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -862,8 +939,8 @@
 							<SYSC_IDLE_SMART>,
 							<SYSC_IDLE_SMART_WKUP>;
 					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
-					clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
-						 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+					clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+						 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
 					clock-names = "fck", "dss_clk";
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -888,6 +965,25 @@
 			};
 		};
 
+		target-module@59000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x59000020 0x4>;
+			reg-names = "rev";
+			clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000000 0x1000>;
+
+			bb2d: gpu@0 {
+				compatible = "vivante,gc";
+				reg = <0x0 0x700>;
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
+				clock-names = "core";
+			};
+		};
+
 		aes1_target: target-module@4b500000 {
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x4b500080 0x4>,
@@ -1237,7 +1333,26 @@
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>;
+		assigned-clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>;
 		assigned-clock-parents = <&sys_32k_ck>;
 	};
 };
+
+/* Local timers, see ARM architected timer wrap erratum i940 */
+&timer15_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
+		assigned-clock-parents = <&timer_sys_clk_div>;
+	};
+};
+
+&timer16_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
+		assigned-clock-parents = <&timer_sys_clk_div>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 6d2cca6b4488..a64364443031 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -187,7 +187,7 @@
 };
 
 &pcf_hdmi {
-	p0 {
+	hdmi-i2c-disable-hog {
 		/*
 		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
 		 * With this PM_SEL(p3) should not matter
diff --git a/arch/arm/boot/dts/dra71x.dtsi b/arch/arm/boot/dts/dra71x.dtsi
index cad0e4a2bd8d..9c270d8f75d5 100644
--- a/arch/arm/boot/dts/dra71x.dtsi
+++ b/arch/arm/boot/dts/dra71x.dtsi
@@ -11,7 +11,3 @@
 &rtctarget {
 	status = "disabled";
 };
-
-&usb4_tm {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index b65b2dd094d0..c79ba671ec2b 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -226,7 +226,7 @@
 	};
 
 	pcf_gpio_21: gpio@21 {
-		compatible = "ti,pcf8575", "nxp,pcf8575";
+		compatible = "nxp,pcf8575";
 		reg = <0x21>;
 		lines-initial-states = <0x1408>;
 		gpio-controller;
@@ -256,7 +256,7 @@
 	clock-frequency = <400000>;
 
 	pcf_hdmi: pcf8575@26 {
-		compatible = "ti,pcf8575", "nxp,pcf8575";
+		compatible = "nxp,pcf8575";
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
@@ -268,7 +268,7 @@
 		 */
 		lines-initial-states = <0x0f2b>;
 
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
@@ -356,7 +356,7 @@
 		#size-cells = <1>;
 		partition@0 {
 			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
+			reg = <0x00000000 0x00020000>;
 		};
 		partition@1 {
 			label = "NAND.SPL.backup1";
@@ -474,7 +474,7 @@
 	status = "okay";
 
 	spi-max-frequency = <76800000>;
-	m25p80@0 {
+	flash@0 {
 		compatible = "s25fl256s1";
 		spi-max-frequency = <76800000>;
 		reg = <0>;
@@ -490,7 +490,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.SPL";
-			reg = <0x00000000 0x000010000>;
+			reg = <0x00000000 0x00010000>;
 		};
 		partition@1 {
 			label = "QSPI.SPL.backup1";
diff --git a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
index a9dce919d443..34eea3c048bd 100644
--- a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
+++ b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * MMC IOdelay values for TI's DRA72x, DRA71x and AM571x SoCs.
  *
  * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 /*
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index d403acc754b6..90617261373c 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -77,12 +77,12 @@
 };
 
 &mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -90,7 +90,7 @@
 };
 
 &mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
@@ -108,7 +108,3 @@
 &pcie2_rc {
 	compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
 };
-
-&usb4_tm {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
index b1147a4b77f9..3256631510c5 100644
--- a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
+++ b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
@@ -6,7 +6,7 @@
 #include "dra7-ipu-dsp-common.dtsi"
 
 &mailbox6 {
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
index e86da7a970b6..b9d040135c5f 100644
--- a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
+++ b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * MMC IOdelay values for TI's DRA74x, DRA75x and AM572x SoCs.
  *
  * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 /*
diff --git a/arch/arm/boot/dts/dra74x-p.dtsi b/arch/arm/boot/dts/dra74x-p.dtsi
new file mode 100644
index 000000000000..006189dad7a7
--- /dev/null
+++ b/arch/arm/boot/dts/dra74x-p.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dra74x.dtsi"
+
+/ {
+	compatible = "ti,dra762", "ti,dra7";
+
+	ocp {
+		emif1: emif@4c000000 {
+			compatible = "ti,emif-dra7xx";
+			reg = <0x4c000000 0x200>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+};
+
+/* MCAN interrupts are hard-wired to irqs 67, 68 */
+&crossbar_mpu {
+	ti,irqs-skip = <10 67 68 133 139 140>;
+};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index e1850d6c841a..cfb39dde4930 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -49,49 +49,6 @@
 			reg = <0x41500000 0x100>;
 		};
 
-		target-module@48940000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x48940000 0x4>,
-			      <0x48940010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x48940000 0x20000>;
-
-			omap_dwc3_4: omap_dwc3_4@0 {
-				compatible = "ti,dwc3";
-				reg = <0 0x10000>;
-				interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				utmi-mode = <2>;
-				ranges;
-				status = "disabled";
-				usb4: usb@10000 {
-					compatible = "snps,dwc3";
-					reg = <0x10000 0x17000>;
-					interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "peripheral",
-							  "host",
-							  "otg";
-					maximum-speed = "high-speed";
-					dr_mode = "otg";
-				};
-			};
-		};
 
 		target-module@41501000 {
 			compatible = "ti,sysc-omap2", "ti,sysc";
@@ -188,12 +145,12 @@
 };
 
 &mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -201,12 +158,12 @@
 };
 
 &mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -224,3 +181,52 @@
 &pcie2_rc {
 	compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
 };
+
+&l4_per3 {
+	segment@0 {
+		usb4_tm: target-module@140000 {         /* 0x48940000, ap 75 3c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x140000 0x4>,
+			      <0x140010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x140000 0x20000>;
+
+			omap_dwc3_4: omap_dwc3_4@0 {
+				compatible = "ti,dwc3";
+				reg = <0 0x10000>;
+				interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <2>;
+				ranges;
+				status = "disabled";
+				usb4: usb@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x17000>;
+					interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					maximum-speed = "high-speed";
+					dr_mode = "otg";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 9bd01ae40b1d..57868ac60d29 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -158,12 +158,6 @@
 		regulator-max-microvolt = <1800000>;
 	};
 
-	clk_ov5640_fixed: clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-	};
-
 	hdmi0: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -355,7 +349,7 @@
 	};
 
 	pcf_lcd: pcf8757@20 {
-		compatible = "ti,pcf8575", "nxp,pcf8575";
+		compatible = "nxp,pcf8575";
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
@@ -366,7 +360,7 @@
 	};
 
 	pcf_gpio_21: pcf8757@21 {
-		compatible = "ti,pcf8575", "nxp,pcf8575";
+		compatible = "nxp,pcf8575";
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
@@ -377,11 +371,11 @@
 	};
 
 	pcf_hdmi: pcf8575@26 {
-		compatible = "ti,pcf8575", "nxp,pcf8575";
+		compatible = "nxp,pcf8575";
 		reg = <0x26>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		p1 {
+		hdmi-audio-hog {
 			/* vin6_sel_s0: high: VIN6, low: audio */
 			gpio-hog;
 			gpios = <1 GPIO_ACTIVE_HIGH>;
@@ -406,27 +400,6 @@
 	};
 };
 
-&i2c5 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-
-		clocks = <&clk_ov5640_fixed>;
-		clock-names = "xclk";
-
-		port {
-			csi2_cam0: endpoint {
-				remote-endpoint = <&csi2_phy0>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-};
-
 &cpu0 {
 	vdd-supply = <&buck10_reg>;
 };
@@ -538,7 +511,7 @@
 
 &qspi {
 	spi-max-frequency = <96000000>;
-	m25p80@0 {
+	flash@0 {
 		spi-max-frequency = <96000000>;
 	};
 };
@@ -573,14 +546,6 @@
 	};
 };
 
-&csi2_0 {
-	csi2_phy0: endpoint {
-		remote-endpoint = <&csi2_cam0>;
-		clock-lanes = <0>;
-		data-lanes = <1 2>;
-	};
-};
-
 &ipu2 {
 	status = "okay";
 	memory-region = <&ipu2_cma_pool>;
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index a09e7bd77fc7..931db7932c11 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -9,13 +9,6 @@
 	compatible = "ti,dra762", "ti,dra7";
 
 	ocp {
-		emif1: emif@4c000000 {
-			compatible = "ti,emif-dra7xx";
-			reg = <0x4c000000 0x200>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
 		target-module@42c01900 {
 			compatible = "ti,sysc-dra7-mcan", "ti,sysc";
 			ranges = <0x0 0x42c00000 0x2000>;
@@ -90,11 +83,6 @@
 	};
 };
 
-/* MCAN interrupts are hard-wired to irqs 67, 68 */
-&crossbar_mpu {
-	ti,irqs-skip = <10 67 68 133 139 140>;
-};
-
 &scm_conf_clocks {
 	dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc {
 		#clock-cells = <0>;
@@ -102,8 +90,8 @@
 		clocks = <&dpll_gmac_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x03fc>;
-		ti,bit-shift=<20>;
-		ti,latch-bit=<26>;
+		ti,bit-shift = <20>;
+		ti,latch-bit = <26>;
 		assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
 		assigned-clock-rates = <80000000>;
 	};
@@ -114,7 +102,7 @@
 		clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
 		reg = <0x3fc>;
 		ti,bit-shift = <29>;
-		ti,latch-bit=<26>;
+		ti,latch-bit = <26>;
 		assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
 		assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
 	};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 2365554eef3c..04a7a6d1d529 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -5,210 +5,244 @@
  * Copyright (C) 2013 Texas Instruments, Inc.
  */
 &cm_core_aon_clocks {
-	atl_clkin0_ck: atl_clkin0_ck {
+	atl_clkin0_ck: clock-atl-clkin0 {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-atl-clock";
+		clock-output-names = "atl_clkin0_ck";
 		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 	};
 
-	atl_clkin1_ck: atl_clkin1_ck {
+	atl_clkin1_ck: clock-atl-clkin1 {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-atl-clock";
+		clock-output-names = "atl_clkin1_ck";
 		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 	};
 
-	atl_clkin2_ck: atl_clkin2_ck {
+	atl_clkin2_ck: clock-atl-clkin2 {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-atl-clock";
+		clock-output-names = "atl_clkin2_ck";
 		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 	};
 
-	atl_clkin3_ck: atl_clkin3_ck {
+	atl_clkin3_ck: clock-atl-clkin3 {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-atl-clock";
+		clock-output-names = "atl_clkin3_ck";
 		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 	};
 
-	hdmi_clkin_ck: hdmi_clkin_ck {
+	hdmi_clkin_ck: clock-hdmi-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "hdmi_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	mlb_clkin_ck: mlb_clkin_ck {
+	mlb_clkin_ck: clock-mlb-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "mlb_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	mlbp_clkin_ck: mlbp_clkin_ck {
+	mlbp_clkin_ck: clock-mlbp-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "mlbp_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	pciesref_acs_clk_ck: pciesref_acs_clk_ck {
+	pciesref_acs_clk_ck: clock-pciesref-acs {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "pciesref_acs_clk_ck";
 		clock-frequency = <100000000>;
 	};
 
-	ref_clkin0_ck: ref_clkin0_ck {
+	ref_clkin0_ck: clock-ref-clkin0 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "ref_clkin0_ck";
 		clock-frequency = <0>;
 	};
 
-	ref_clkin1_ck: ref_clkin1_ck {
+	ref_clkin1_ck: clock-ref-clkin1 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "ref_clkin1_ck";
 		clock-frequency = <0>;
 	};
 
-	ref_clkin2_ck: ref_clkin2_ck {
+	ref_clkin2_ck: clock-ref-clkin2 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "ref_clkin2_ck";
 		clock-frequency = <0>;
 	};
 
-	ref_clkin3_ck: ref_clkin3_ck {
+	ref_clkin3_ck: clock-ref-clkin3 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "ref_clkin3_ck";
 		clock-frequency = <0>;
 	};
 
-	rmii_clk_ck: rmii_clk_ck {
+	rmii_clk_ck: clock-rmii {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "rmii_clk_ck";
 		clock-frequency = <0>;
 	};
 
-	sdvenc_clkin_ck: sdvenc_clkin_ck {
+	sdvenc_clkin_ck: clock-sdvenc-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "sdvenc_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+	secure_32k_clk_src_ck: clock-secure-32k-clk-src {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "secure_32k_clk_src_ck";
 		clock-frequency = <32768>;
 	};
 
-	sys_clk32_crystal_ck: sys_clk32_crystal_ck {
+	sys_clk32_crystal_ck: clock-sys-clk32-crystal {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "sys_clk32_crystal_ck";
 		clock-frequency = <32768>;
 	};
 
-	sys_clk32_pseudo_ck: sys_clk32_pseudo_ck {
+	sys_clk32_pseudo_ck: clock-sys-clk32-pseudo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "sys_clk32_pseudo_ck";
 		clocks = <&sys_clkin1>;
 		clock-mult = <1>;
 		clock-div = <610>;
 	};
 
-	virt_12000000_ck: virt_12000000_ck {
+	virt_12000000_ck: clock-virt-12000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_12000000_ck";
 		clock-frequency = <12000000>;
 	};
 
-	virt_13000000_ck: virt_13000000_ck {
+	virt_13000000_ck: clock-virt-13000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_13000000_ck";
 		clock-frequency = <13000000>;
 	};
 
-	virt_16800000_ck: virt_16800000_ck {
+	virt_16800000_ck: clock-virt-16800000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_16800000_ck";
 		clock-frequency = <16800000>;
 	};
 
-	virt_19200000_ck: virt_19200000_ck {
+	virt_19200000_ck: clock-virt-19200000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_19200000_ck";
 		clock-frequency = <19200000>;
 	};
 
-	virt_20000000_ck: virt_20000000_ck {
+	virt_20000000_ck: clock-virt-20000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_20000000_ck";
 		clock-frequency = <20000000>;
 	};
 
-	virt_26000000_ck: virt_26000000_ck {
+	virt_26000000_ck: clock-virt-26000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_26000000_ck";
 		clock-frequency = <26000000>;
 	};
 
-	virt_27000000_ck: virt_27000000_ck {
+	virt_27000000_ck: clock-virt-27000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_27000000_ck";
 		clock-frequency = <27000000>;
 	};
 
-	virt_38400000_ck: virt_38400000_ck {
+	virt_38400000_ck: clock-virt-38400000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_38400000_ck";
 		clock-frequency = <38400000>;
 	};
 
-	sys_clkin2: sys_clkin2 {
+	sys_clkin2: clock-sys-clkin2 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "sys_clkin2";
 		clock-frequency = <22579200>;
 	};
 
-	usb_otg_clkin_ck: usb_otg_clkin_ck {
+	usb_otg_clkin_ck: clock-usb-otg-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "usb_otg_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	video1_clkin_ck: video1_clkin_ck {
+	video1_clkin_ck: clock-video1-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "video1_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	video1_m2_clkin_ck: video1_m2_clkin_ck {
+	video1_m2_clkin_ck: clock-video1-m2-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "video1_m2_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	video2_clkin_ck: video2_clkin_ck {
+	video2_clkin_ck: clock-video2-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "video2_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	video2_m2_clkin_ck: video2_m2_clkin_ck {
+	video2_m2_clkin_ck: clock-video2-m2-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "video2_m2_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	dpll_abe_ck: dpll_abe_ck@1e0 {
+	dpll_abe_ck: clock@1e0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-m4xen-clock";
+		clock-output-names = "dpll_abe_ck";
 		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
 		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
 	};
 
-	dpll_abe_x2_ck: dpll_abe_x2_ck {
+	dpll_abe_x2_ck: clock-dpll-abe-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_abe_x2_ck";
 		clocks = <&dpll_abe_ck>;
 	};
 
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
+	dpll_abe_m2x2_ck: clock-dpll-abe-m2x2-8@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m2x2_ck";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -217,18 +251,20 @@
 		ti,invert-autoidle-bit;
 	};
 
-	abe_clk: abe_clk@108 {
+	abe_clk: clock-abe@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_clk";
 		clocks = <&dpll_abe_m2x2_ck>;
 		ti,max-div = <4>;
 		reg = <0x0108>;
 		ti,index-power-of-two;
 	};
 
-	dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
+	dpll_abe_m2_ck: clock-dpll-abe-m2-8@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m2_ck";
 		clocks = <&dpll_abe_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -237,9 +273,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
+	dpll_abe_m3x2_ck: clock-dpll-abe-m3x2-8@1f4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m3x2_ck";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -248,30 +285,34 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_byp_mux: dpll_core_byp_mux@12c {
+	dpll_core_byp_mux: clock-dpll-core-byp-mux-23@12c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_core_byp_mux";
 		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x012c>;
 	};
 
-	dpll_core_ck: dpll_core_ck@120 {
+	dpll_core_ck: clock@120 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
+		clock-output-names = "dpll_core_ck";
 		clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
 		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
 	};
 
-	dpll_core_x2_ck: dpll_core_x2_ck {
+	dpll_core_x2_ck: clock-dpll-core-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_core_x2_ck";
 		clocks = <&dpll_core_ck>;
 	};
 
-	dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
+	dpll_core_h12x2_ck: clock-dpll-core-h12x2-8@13c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h12x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -280,24 +321,27 @@
 		ti,invert-autoidle-bit;
 	};
 
-	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+	mpu_dpll_hs_clk_div: clock-mpu-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mpu_dpll_hs_clk_div";
 		clocks = <&dpll_core_h12x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_mpu_ck: dpll_mpu_ck@160 {
+	dpll_mpu_ck: clock@160 {
 		#clock-cells = <0>;
 		compatible = "ti,omap5-mpu-dpll-clock";
+		clock-output-names = "dpll_mpu_ck";
 		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
 		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
 	};
 
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
+	dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@170 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_mpu_m2_ck";
 		clocks = <&dpll_mpu_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -306,42 +350,47 @@
 		ti,invert-autoidle-bit;
 	};
 
-	mpu_dclk_div: mpu_dclk_div {
+	mpu_dclk_div: clock-mpu-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mpu_dclk_div";
 		clocks = <&dpll_mpu_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div {
+	dsp_dpll_hs_clk_div: clock-dsp-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dsp_dpll_hs_clk_div";
 		clocks = <&dpll_core_h12x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_dsp_byp_mux: dpll_dsp_byp_mux@240 {
+	dpll_dsp_byp_mux: clock-dpll-dsp-byp-mux-23@240 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_dsp_byp_mux";
 		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x0240>;
 	};
 
-	dpll_dsp_ck: dpll_dsp_ck@234 {
+	dpll_dsp_ck: clock@234 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_dsp_ck";
 		clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
 		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
 		assigned-clocks = <&dpll_dsp_ck>;
 		assigned-clock-rates = <600000000>;
 	};
 
-	dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 {
+	dpll_dsp_m2_ck: clock-dpll-dsp-m2-8@244 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_dsp_m2_ck";
 		clocks = <&dpll_dsp_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -352,34 +401,38 @@
 		assigned-clock-rates = <600000000>;
 	};
 
-	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+	iva_dpll_hs_clk_div: clock-iva-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "iva_dpll_hs_clk_div";
 		clocks = <&dpll_core_h12x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
+	dpll_iva_byp_mux: clock-dpll-iva-byp-mux-23@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_iva_byp_mux";
 		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x01ac>;
 	};
 
-	dpll_iva_ck: dpll_iva_ck@1a0 {
+	dpll_iva_ck: clock@1a0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_iva_ck";
 		clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
 		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
 		assigned-clocks = <&dpll_iva_ck>;
 		assigned-clock-rates = <1165000000>;
 	};
 
-	dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 {
+	dpll_iva_m2_ck: clock-dpll-iva-m2-8@1b0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_iva_m2_ck";
 		clocks = <&dpll_iva_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -390,34 +443,38 @@
 		assigned-clock-rates = <388333334>;
 	};
 
-	iva_dclk: iva_dclk {
+	iva_dclk: clock-iva-dclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "iva_dclk";
 		clocks = <&dpll_iva_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_gpu_byp_mux: dpll_gpu_byp_mux@2e4 {
+	dpll_gpu_byp_mux: clock-dpll-gpu-byp-mux-23@2e4 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_gpu_byp_mux";
 		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x02e4>;
 	};
 
-	dpll_gpu_ck: dpll_gpu_ck@2d8 {
+	dpll_gpu_ck: clock@2d8 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_gpu_ck";
 		clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
 		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
 		assigned-clocks = <&dpll_gpu_ck>;
 		assigned-clock-rates = <1277000000>;
 	};
 
-	dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 {
+	dpll_gpu_m2_ck: clock-dpll-gpu-m2-8@2e8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gpu_m2_ck";
 		clocks = <&dpll_gpu_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -428,9 +485,10 @@
 		assigned-clock-rates = <425666667>;
 	};
 
-	dpll_core_m2_ck: dpll_core_m2_ck@130 {
+	dpll_core_m2_ck: clock-dpll-core-m2-8@130 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m2_ck";
 		clocks = <&dpll_core_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -439,32 +497,36 @@
 		ti,invert-autoidle-bit;
 	};
 
-	core_dpll_out_dclk_div: core_dpll_out_dclk_div {
+	core_dpll_out_dclk_div: clock-core-dpll-out-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "core_dpll_out_dclk_div";
 		clocks = <&dpll_core_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_ddr_byp_mux: dpll_ddr_byp_mux@21c {
+	dpll_ddr_byp_mux: clock-dpll-ddr-byp-mux-23@21c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_ddr_byp_mux";
 		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x021c>;
 	};
 
-	dpll_ddr_ck: dpll_ddr_ck@210 {
+	dpll_ddr_ck: clock@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_ddr_ck";
 		clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
 		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
 	};
 
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck@220 {
+	dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@220 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_ddr_m2_ck";
 		clocks = <&dpll_ddr_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -473,24 +535,27 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_byp_mux: dpll_gmac_byp_mux@2b4 {
+	dpll_gmac_byp_mux: clock-dpll-gmac-byp-mux-23@2b4 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_gmac_byp_mux";
 		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x02b4>;
 	};
 
-	dpll_gmac_ck: dpll_gmac_ck@2a8 {
+	dpll_gmac_ck: clock@2a8 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_gmac_ck";
 		clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
 		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
 	};
 
-	dpll_gmac_m2_ck: dpll_gmac_m2_ck@2b8 {
+	dpll_gmac_m2_ck: clock-dpll-gmac-m2-8@2b8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gmac_m2_ck";
 		clocks = <&dpll_gmac_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -499,72 +564,81 @@
 		ti,invert-autoidle-bit;
 	};
 
-	video2_dclk_div: video2_dclk_div {
+	video2_dclk_div: clock-video2-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video2_dclk_div";
 		clocks = <&video2_m2_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	video1_dclk_div: video1_dclk_div {
+	video1_dclk_div: clock-video1-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video1_dclk_div";
 		clocks = <&video1_m2_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	hdmi_dclk_div: hdmi_dclk_div {
+	hdmi_dclk_div: clock-hdmi-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "hdmi_dclk_div";
 		clocks = <&hdmi_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+	per_dpll_hs_clk_div: clock-per-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "per_dpll_hs_clk_div";
 		clocks = <&dpll_abe_m3x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+	usb_dpll_hs_clk_div: clock-usb-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "usb_dpll_hs_clk_div";
 		clocks = <&dpll_abe_m3x2_ck>;
 		clock-mult = <1>;
 		clock-div = <3>;
 	};
 
-	eve_dpll_hs_clk_div: eve_dpll_hs_clk_div {
+	eve_dpll_hs_clk_div: clock-eve-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "eve_dpll_hs_clk_div";
 		clocks = <&dpll_core_h12x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_eve_byp_mux: dpll_eve_byp_mux@290 {
+	dpll_eve_byp_mux: clock-dpll-eve-byp-mux-23@290 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_eve_byp_mux";
 		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x0290>;
 	};
 
-	dpll_eve_ck: dpll_eve_ck@284 {
+	dpll_eve_ck: clock@284 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_eve_ck";
 		clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
 		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
 	};
 
-	dpll_eve_m2_ck: dpll_eve_m2_ck@294 {
+	dpll_eve_m2_ck: clock-dpll-eve-m2-8@294 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_eve_m2_ck";
 		clocks = <&dpll_eve_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -573,17 +647,19 @@
 		ti,invert-autoidle-bit;
 	};
 
-	eve_dclk_div: eve_dclk_div {
+	eve_dclk_div: clock-eve-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "eve_dclk_div";
 		clocks = <&dpll_eve_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
+	dpll_core_h13x2_ck: clock-dpll-core-h13x2-8@140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h13x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -592,9 +668,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
+	dpll_core_h14x2_ck: clock-dpll-core-h14x2-8@144 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h14x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -603,9 +680,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
+	dpll_core_h22x2_ck: clock-dpll-core-h22x2-8@154 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h22x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -614,9 +692,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
+	dpll_core_h23x2_ck: clock-dpll-core-h23x2-8@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h23x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -625,9 +704,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
+	dpll_core_h24x2_ck: clock-dpll-core-h24x2-8@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h24x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -636,15 +716,17 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+	dpll_ddr_x2_ck: clock-dpll-ddr-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_ddr_x2_ck";
 		clocks = <&dpll_ddr_ck>;
 	};
 
-	dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck@228 {
+	dpll_ddr_h11x2_ck: clock-dpll-ddr-h11x2-8@228 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_ddr_h11x2_ck";
 		clocks = <&dpll_ddr_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -653,15 +735,17 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_dsp_x2_ck: dpll_dsp_x2_ck {
+	dpll_dsp_x2_ck: clock-dpll-dsp-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_dsp_x2_ck";
 		clocks = <&dpll_dsp_ck>;
 	};
 
-	dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck@248 {
+	dpll_dsp_m3x2_ck: clock-dpll-dsp-m3x2-8@248 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_dsp_m3x2_ck";
 		clocks = <&dpll_dsp_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -672,15 +756,17 @@
 		assigned-clock-rates = <400000000>;
 	};
 
-	dpll_gmac_x2_ck: dpll_gmac_x2_ck {
+	dpll_gmac_x2_ck: clock-dpll-gmac-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_gmac_x2_ck";
 		clocks = <&dpll_gmac_ck>;
 	};
 
-	dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck@2c0 {
+	dpll_gmac_h11x2_ck: clock-dpll-gmac-h11x2-8@2c0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gmac_h11x2_ck";
 		clocks = <&dpll_gmac_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -689,9 +775,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck@2c4 {
+	dpll_gmac_h12x2_ck: clock-dpll-gmac-h12x2-8@2c4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gmac_h12x2_ck";
 		clocks = <&dpll_gmac_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -700,9 +787,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck@2c8 {
+	dpll_gmac_h13x2_ck: clock-dpll-gmac-h13x2-8@2c8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gmac_h13x2_ck";
 		clocks = <&dpll_gmac_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -711,9 +799,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck@2bc {
+	dpll_gmac_m3x2_ck: clock-dpll-gmac-m3x2-8@2bc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gmac_m3x2_ck";
 		clocks = <&dpll_gmac_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -722,33 +811,37 @@
 		ti,invert-autoidle-bit;
 	};
 
-	gmii_m_clk_div: gmii_m_clk_div {
+	gmii_m_clk_div: clock-gmii-m-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "gmii_m_clk_div";
 		clocks = <&dpll_gmac_h11x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	hdmi_clk2_div: hdmi_clk2_div {
+	hdmi_clk2_div: clock-hdmi-clk2-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "hdmi_clk2_div";
 		clocks = <&hdmi_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	hdmi_div_clk: hdmi_div_clk {
+	hdmi_div_clk: clock-hdmi-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "hdmi_div_clk";
 		clocks = <&hdmi_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l3_iclk_div: l3_iclk_div@100 {
+	l3_iclk_div: clock-l3-iclk-div-4@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3_iclk_div";
 		ti,max-div = <2>;
 		ti,bit-shift = <4>;
 		reg = <0x0100>;
@@ -756,374 +849,420 @@
 		ti,index-power-of-two;
 	};
 
-	l4_root_clk_div: l4_root_clk_div {
+	l4_root_clk_div: clock-l4-root-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4_root_clk_div";
 		clocks = <&l3_iclk_div>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	video1_clk2_div: video1_clk2_div {
+	video1_clk2_div: clock-video1-clk2-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video1_clk2_div";
 		clocks = <&video1_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	video1_div_clk: video1_div_clk {
+	video1_div_clk: clock-video1-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video1_div_clk";
 		clocks = <&video1_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	video2_clk2_div: video2_clk2_div {
+	video2_clk2_div: clock-video2-clk2-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video2_clk2_div";
 		clocks = <&video2_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	video2_div_clk: video2_div_clk {
+	video2_div_clk: clock-video2-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video2_div_clk";
 		clocks = <&video2_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dummy_ck: dummy_ck {
+	dummy_ck: clock-dummy {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "dummy_ck";
 		clock-frequency = <0>;
 	};
 };
 &prm_clocks {
-	sys_clkin1: sys_clkin1@110 {
+	sys_clkin1: clock-sys-clkin1@110 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sys_clkin1";
 		clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
 		reg = <0x0110>;
 		ti,index-starts-at-one;
 	};
 
-	abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux@118 {
+	abe_dpll_sys_clk_mux: clock-abe-dpll-sys-clk-mux@118 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_sys_clk_mux";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
 		reg = <0x0118>;
 	};
 
-	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@114 {
+	abe_dpll_bypass_clk_mux: clock-abe-dpll-bypass-clk-mux@114 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_bypass_clk_mux";
 		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
 		reg = <0x0114>;
 	};
 
-	abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
+	abe_dpll_clk_mux: clock-abe-dpll-clk-mux@10c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_clk_mux";
 		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
 		reg = <0x010c>;
 	};
 
-	abe_24m_fclk: abe_24m_fclk@11c {
+	abe_24m_fclk: clock-abe-24m@11c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_24m_fclk";
 		clocks = <&dpll_abe_m2x2_ck>;
 		reg = <0x011c>;
 		ti,dividers = <8>, <16>;
 	};
 
-	aess_fclk: aess_fclk@178 {
+	aess_fclk: clock-aess@178 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "aess_fclk";
 		clocks = <&abe_clk>;
 		reg = <0x0178>;
 		ti,max-div = <2>;
 	};
 
-	abe_giclk_div: abe_giclk_div@174 {
+	abe_giclk_div: clock-abe-giclk-div@174 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_giclk_div";
 		clocks = <&aess_fclk>;
 		reg = <0x0174>;
 		ti,max-div = <2>;
 	};
 
-	abe_lp_clk_div: abe_lp_clk_div@1d8 {
+	abe_lp_clk_div: clock-abe-lp-clk-div@1d8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_lp_clk_div";
 		clocks = <&dpll_abe_m2x2_ck>;
 		reg = <0x01d8>;
 		ti,dividers = <16>, <32>;
 	};
 
-	abe_sys_clk_div: abe_sys_clk_div@120 {
+	abe_sys_clk_div: clock-abe-sys-clk-div@120 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_sys_clk_div";
 		clocks = <&sys_clkin1>;
 		reg = <0x0120>;
 		ti,max-div = <2>;
 	};
 
-	adc_gfclk_mux: adc_gfclk_mux@1dc {
+	adc_gfclk_mux: clock-adc-gfclk-mux@1dc {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "adc_gfclk_mux";
 		clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
 		reg = <0x01dc>;
 	};
 
-	sys_clk1_dclk_div: sys_clk1_dclk_div@1c8 {
+	sys_clk1_dclk_div: clock-sys-clk1-dclk-div@1c8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "sys_clk1_dclk_div";
 		clocks = <&sys_clkin1>;
 		ti,max-div = <64>;
 		reg = <0x01c8>;
 		ti,index-power-of-two;
 	};
 
-	sys_clk2_dclk_div: sys_clk2_dclk_div@1cc {
+	sys_clk2_dclk_div: clock-sys-clk2-dclk-div@1cc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "sys_clk2_dclk_div";
 		clocks = <&sys_clkin2>;
 		ti,max-div = <64>;
 		reg = <0x01cc>;
 		ti,index-power-of-two;
 	};
 
-	per_abe_x1_dclk_div: per_abe_x1_dclk_div@1bc {
+	per_abe_x1_dclk_div: clock-per-abe-x1-dclk-div@1bc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "per_abe_x1_dclk_div";
 		clocks = <&dpll_abe_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x01bc>;
 		ti,index-power-of-two;
 	};
 
-	dsp_gclk_div: dsp_gclk_div@18c {
+	dsp_gclk_div: clock-dsp-gclk-div@18c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dsp_gclk_div";
 		clocks = <&dpll_dsp_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x018c>;
 		ti,index-power-of-two;
 	};
 
-	gpu_dclk: gpu_dclk@1a0 {
+	gpu_dclk: clock-gpu-dclk@1a0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "gpu_dclk";
 		clocks = <&dpll_gpu_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x01a0>;
 		ti,index-power-of-two;
 	};
 
-	emif_phy_dclk_div: emif_phy_dclk_div@190 {
+	emif_phy_dclk_div: clock-emif-phy-dclk-div@190 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "emif_phy_dclk_div";
 		clocks = <&dpll_ddr_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x0190>;
 		ti,index-power-of-two;
 	};
 
-	gmac_250m_dclk_div: gmac_250m_dclk_div@19c {
+	gmac_250m_dclk_div: clock-gmac-250m-dclk-div@19c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "gmac_250m_dclk_div";
 		clocks = <&dpll_gmac_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x019c>;
 		ti,index-power-of-two;
 	};
 
-	gmac_main_clk: gmac_main_clk {
+	gmac_main_clk: clock-gmac-main {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "gmac_main_clk";
 		clocks = <&gmac_250m_dclk_div>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	l3init_480m_dclk_div: l3init_480m_dclk_div@1ac {
+	l3init_480m_dclk_div: clock-l3init-480m-dclk-div@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3init_480m_dclk_div";
 		clocks = <&dpll_usb_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x01ac>;
 		ti,index-power-of-two;
 	};
 
-	usb_otg_dclk_div: usb_otg_dclk_div@184 {
+	usb_otg_dclk_div: clock-usb-otg-dclk-div@184 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "usb_otg_dclk_div";
 		clocks = <&usb_otg_clkin_ck>;
 		ti,max-div = <64>;
 		reg = <0x0184>;
 		ti,index-power-of-two;
 	};
 
-	sata_dclk_div: sata_dclk_div@1c0 {
+	sata_dclk_div: clock-sata-dclk-div@1c0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "sata_dclk_div";
 		clocks = <&sys_clkin1>;
 		ti,max-div = <64>;
 		reg = <0x01c0>;
 		ti,index-power-of-two;
 	};
 
-	pcie2_dclk_div: pcie2_dclk_div@1b8 {
+	pcie2_dclk_div: clock-pcie2-dclk-div@1b8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "pcie2_dclk_div";
 		clocks = <&dpll_pcie_ref_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x01b8>;
 		ti,index-power-of-two;
 	};
 
-	pcie_dclk_div: pcie_dclk_div@1b4 {
+	pcie_dclk_div: clock-pcie-dclk-div@1b4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "pcie_dclk_div";
 		clocks = <&apll_pcie_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x01b4>;
 		ti,index-power-of-two;
 	};
 
-	emu_dclk_div: emu_dclk_div@194 {
+	emu_dclk_div: clock-emu-dclk-div@194 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "emu_dclk_div";
 		clocks = <&sys_clkin1>;
 		ti,max-div = <64>;
 		reg = <0x0194>;
 		ti,index-power-of-two;
 	};
 
-	secure_32k_dclk_div: secure_32k_dclk_div@1c4 {
+	secure_32k_dclk_div: clock-secure-32k-dclk-div@1c4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "secure_32k_dclk_div";
 		clocks = <&secure_32k_clk_src_ck>;
 		ti,max-div = <64>;
 		reg = <0x01c4>;
 		ti,index-power-of-two;
 	};
 
-	clkoutmux0_clk_mux: clkoutmux0_clk_mux@158 {
+	clkoutmux0_clk_mux: clock-clkoutmux0-clk-mux@158 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "clkoutmux0_clk_mux";
 		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
 		reg = <0x0158>;
 	};
 
-	clkoutmux1_clk_mux: clkoutmux1_clk_mux@15c {
+	clkoutmux1_clk_mux: clock-clkoutmux1-clk-mux@15c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "clkoutmux1_clk_mux";
 		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
 		reg = <0x015c>;
 	};
 
-	clkoutmux2_clk_mux: clkoutmux2_clk_mux@160 {
+	clkoutmux2_clk_mux: clock-clkoutmux2-clk-mux@160 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "clkoutmux2_clk_mux";
 		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
 		reg = <0x0160>;
 	};
 
-	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+	custefuse_sys_gfclk_div: clock-custefuse-sys-gfclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "custefuse_sys_gfclk_div";
 		clocks = <&sys_clkin1>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	eve_clk: eve_clk@180 {
+	eve_clk: clock-eve@180 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "eve_clk";
 		clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
 		reg = <0x0180>;
 	};
 
-	hdmi_dpll_clk_mux: hdmi_dpll_clk_mux@164 {
+	hdmi_dpll_clk_mux: clock-hdmi-dpll-clk-mux@164 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "hdmi_dpll_clk_mux";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
 		reg = <0x0164>;
 	};
 
-	mlb_clk: mlb_clk@134 {
+	mlb_clk: clock-mlb@134 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "mlb_clk";
 		clocks = <&mlb_clkin_ck>;
 		ti,max-div = <64>;
 		reg = <0x0134>;
 		ti,index-power-of-two;
 	};
 
-	mlbp_clk: mlbp_clk@130 {
+	mlbp_clk: clock-mlbp@130 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "mlbp_clk";
 		clocks = <&mlbp_clkin_ck>;
 		ti,max-div = <64>;
 		reg = <0x0130>;
 		ti,index-power-of-two;
 	};
 
-	per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div@138 {
+	per_abe_x1_gfclk2_div: clock-per-abe-x1-gfclk2-div@138 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "per_abe_x1_gfclk2_div";
 		clocks = <&dpll_abe_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x0138>;
 		ti,index-power-of-two;
 	};
 
-	timer_sys_clk_div: timer_sys_clk_div@144 {
+	timer_sys_clk_div: clock-timer-sys-clk-div@144 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "timer_sys_clk_div";
 		clocks = <&sys_clkin1>;
 		reg = <0x0144>;
 		ti,max-div = <2>;
 	};
 
-	video1_dpll_clk_mux: video1_dpll_clk_mux@168 {
+	video1_dpll_clk_mux: clock-video1-dpll-clk-mux@168 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "video1_dpll_clk_mux";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
 		reg = <0x0168>;
 	};
 
-	video2_dpll_clk_mux: video2_dpll_clk_mux@16c {
+	video2_dpll_clk_mux: clock-video2-dpll-clk-mux@16c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "video2_dpll_clk_mux";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
 		reg = <0x016c>;
 	};
 
-	wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
+	wkupaon_iclk_mux: clock-wkupaon-iclk-mux@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "wkupaon_iclk_mux";
 		clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
 		reg = <0x0108>;
 	};
 };
 
 &cm_core_clocks {
-	dpll_pcie_ref_ck: dpll_pcie_ref_ck@200 {
+	dpll_pcie_ref_ck: clock@200 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_pcie_ref_ck";
 		clocks = <&sys_clkin1>, <&sys_clkin1>;
 		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
 	};
 
-	dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck@210 {
+	dpll_pcie_ref_m2ldo_ck: clock-dpll-pcie-ref-m2ldo-8@210 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_pcie_ref_m2ldo_ck";
 		clocks = <&dpll_pcie_ref_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -1132,23 +1271,26 @@
 		ti,invert-autoidle-bit;
 	};
 
-	apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 {
+	apll_pcie_in_clk_mux: clock-apll-pcie-in-clk-mux-7@4ae06118 {
 		compatible = "ti,mux-clock";
+		clock-output-names = "apll_pcie_in_clk_mux";
 		clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>;
 		#clock-cells = <0>;
 		reg = <0x021c 0x4>;
 		ti,bit-shift = <7>;
 	};
 
-	apll_pcie_ck: apll_pcie_ck@21c {
+	apll_pcie_ck: clock@21c {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-apll-clock";
+		clock-output-names = "apll_pcie_ck";
 		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
 		reg = <0x021c>, <0x0220>;
 	};
 
-	optfclk_pciephy_div: optfclk_pciephy_div@4a00821c {
+	optfclk_pciephy_div: clock-optfclk-pciephy-div-8@4a00821c {
 		compatible = "ti,divider-clock";
+		clock-output-names = "optfclk_pciephy_div";
 		clocks = <&apll_pcie_ck>;
 		#clock-cells = <0>;
 		reg = <0x021c>;
@@ -1157,48 +1299,54 @@
 		ti,max-div = <2>;
 	};
 
-	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
+	apll_pcie_clkvcoldo: clock-apll-pcie-clkvcoldo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "apll_pcie_clkvcoldo";
 		clocks = <&apll_pcie_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div {
+	apll_pcie_clkvcoldo_div: clock-apll-pcie-clkvcoldo-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "apll_pcie_clkvcoldo_div";
 		clocks = <&apll_pcie_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	apll_pcie_m2_ck: apll_pcie_m2_ck {
+	apll_pcie_m2_ck: clock-apll-pcie-m2 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "apll_pcie_m2_ck";
 		clocks = <&apll_pcie_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_per_byp_mux: dpll_per_byp_mux@14c {
+	dpll_per_byp_mux: clock-dpll-per-byp-mux-23@14c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_per_byp_mux";
 		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x014c>;
 	};
 
-	dpll_per_ck: dpll_per_ck@140 {
+	dpll_per_ck: clock@140 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_per_ck";
 		clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
 
-	dpll_per_m2_ck: dpll_per_m2_ck@150 {
+	dpll_per_m2_ck: clock-dpll-per-m2-8@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2_ck";
 		clocks = <&dpll_per_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -1207,32 +1355,36 @@
 		ti,invert-autoidle-bit;
 	};
 
-	func_96m_aon_dclk_div: func_96m_aon_dclk_div {
+	func_96m_aon_dclk_div: clock-func-96m-aon-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_96m_aon_dclk_div";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
+	dpll_usb_byp_mux: clock-dpll-usb-byp-mux-23@18c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_usb_byp_mux";
 		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x018c>;
 	};
 
-	dpll_usb_ck: dpll_usb_ck@180 {
+	dpll_usb_ck: clock@180 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
+		clock-output-names = "dpll_usb_ck";
 		clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
 
-	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
+	dpll_usb_m2_ck: clock-dpll-usb-m2-8@190 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_usb_m2_ck";
 		clocks = <&dpll_usb_ck>;
 		ti,max-div = <127>;
 		ti,autoidle-shift = <8>;
@@ -1241,9 +1393,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck@210 {
+	dpll_pcie_ref_m2_ck: clock-dpll-pcie-ref-m2-8@210 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_pcie_ref_m2_ck";
 		clocks = <&dpll_pcie_ref_ck>;
 		ti,max-div = <127>;
 		ti,autoidle-shift = <8>;
@@ -1252,15 +1405,17 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_x2_ck: dpll_per_x2_ck {
+	dpll_per_x2_ck: clock-dpll-per-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_per_x2_ck";
 		clocks = <&dpll_per_ck>;
 	};
 
-	dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
+	dpll_per_h11x2_ck: clock-dpll-per-h11x2-8@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h11x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -1269,9 +1424,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
+	dpll_per_h12x2_ck: clock-dpll-per-h12x2-8@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h12x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -1280,9 +1436,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_h13x2_ck: dpll_per_h13x2_ck@160 {
+	dpll_per_h13x2_ck: clock-dpll-per-h13x2-8@160 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h13x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -1291,9 +1448,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
+	dpll_per_h14x2_ck: clock-dpll-per-h14x2-8@164 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h14x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -1302,9 +1460,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
+	dpll_per_m2x2_ck: clock-dpll-per-m2x2-8@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -1313,105 +1472,118 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+	dpll_usb_clkdcoldo: clock-dpll-usb-clkdcoldo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_usb_clkdcoldo";
 		clocks = <&dpll_usb_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	func_128m_clk: func_128m_clk {
+	func_128m_clk: clock-func-128m {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_128m_clk";
 		clocks = <&dpll_per_h11x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	func_12m_fclk: func_12m_fclk {
+	func_12m_fclk: clock-func-12m-fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_12m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <16>;
 	};
 
-	func_24m_clk: func_24m_clk {
+	func_24m_clk: clock-func-24m {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_24m_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	func_48m_fclk: func_48m_fclk {
+	func_48m_fclk: clock-func-48m-fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_48m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	func_96m_fclk: func_96m_fclk {
+	func_96m_fclk: clock-func-96m-fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_96m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	l3init_60m_fclk: l3init_60m_fclk@104 {
+	l3init_60m_fclk: clock-l3init-60m@104 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3init_60m_fclk";
 		clocks = <&dpll_usb_m2_ck>;
 		reg = <0x0104>;
 		ti,dividers = <1>, <8>;
 	};
 
-	clkout2_clk: clkout2_clk@6b0 {
+	clkout2_clk: clock-clkout2-8@6b0 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "clkout2_clk";
 		clocks = <&clkoutmux2_clk_mux>;
 		ti,bit-shift = <8>;
 		reg = <0x06b0>;
 	};
 
-	l3init_960m_gfclk: l3init_960m_gfclk@6c0 {
+	l3init_960m_gfclk: clock-l3init-960m-gfclk-8@6c0 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "l3init_960m_gfclk";
 		clocks = <&dpll_usb_clkdcoldo>;
 		ti,bit-shift = <8>;
 		reg = <0x06c0>;
 	};
 
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@640 {
+	usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy1_always_on_clk32k";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0640>;
 	};
 
-	usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k@688 {
+	usb_phy2_always_on_clk32k: clock-usb-phy2-always-on-clk32k-8@688 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy2_always_on_clk32k";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0688>;
 	};
 
-	usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k@698 {
+	usb_phy3_always_on_clk32k: clock-usb-phy3-always-on-clk32k-8@698 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy3_always_on_clk32k";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0698>;
 	};
 
-	gpu_core_gclk_mux: gpu_core_gclk_mux@1220 {
+	gpu_core_gclk_mux: clock-gpu-core-gclk-mux-24@1220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gpu_core_gclk_mux";
 		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1220>;
@@ -1419,9 +1591,10 @@
 		assigned-clock-parents = <&dpll_gpu_m2_ck>;
 	};
 
-	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 {
+	gpu_hyd_gclk_mux: clock-gpu-hyd-gclk-mux-26@1220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gpu_hyd_gclk_mux";
 		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
 		ti,bit-shift = <26>;
 		reg = <0x1220>;
@@ -1429,34 +1602,38 @@
 		assigned-clock-parents = <&dpll_gpu_m2_ck>;
 	};
 
-	l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 {
+	l3instr_ts_gclk_div: clock-l3instr-ts-gclk-div-24@e50 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3instr_ts_gclk_div";
 		clocks = <&wkupaon_iclk_mux>;
 		ti,bit-shift = <24>;
 		reg = <0x0e50>;
 		ti,dividers = <8>, <16>, <32>;
 	};
 
-	vip1_gclk_mux: vip1_gclk_mux@1020 {
+	vip1_gclk_mux: clock-vip1-gclk-mux-24@1020 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "vip1_gclk_mux";
 		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1020>;
 	};
 
-	vip2_gclk_mux: vip2_gclk_mux@1028 {
+	vip2_gclk_mux: clock-vip2-gclk-mux-24@1028 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "vip2_gclk_mux";
 		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1028>;
 	};
 
-	vip3_gclk_mux: vip3_gclk_mux@1030 {
+	vip3_gclk_mux: clock-vip3-gclk-mux-24@1030 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "vip3_gclk_mux";
 		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1030>;
@@ -1464,48 +1641,54 @@
 };
 
 &cm_core_clockdomains {
-	coreaon_clkdm: coreaon_clkdm {
+	coreaon_clkdm: clock-coreaon-clkdm {
 		compatible = "ti,clockdomain";
+		clock-output-names = "coreaon_clkdm";
 		clocks = <&dpll_usb_ck>;
 	};
 };
 
 &scm_conf_clocks {
-	dss_deshdcp_clk: dss_deshdcp_clk@558 {
+	dss_deshdcp_clk: clock-dss-deshdcp-0@558 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "dss_deshdcp_clk";
 		clocks = <&l3_iclk_div>;
 		ti,bit-shift = <0>;
 		reg = <0x558>;
 	};
 
-       ehrpwm0_tbclk: ehrpwm0_tbclk@558 {
+       ehrpwm0_tbclk: clock-ehrpwm0-tbclk-20@558 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm0_tbclk";
 		clocks = <&l4_root_clk_div>;
 		ti,bit-shift = <20>;
 		reg = <0x0558>;
 	};
 
-	ehrpwm1_tbclk: ehrpwm1_tbclk@558 {
+	ehrpwm1_tbclk: clock-ehrpwm1-tbclk-21@558 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm1_tbclk";
 		clocks = <&l4_root_clk_div>;
 		ti,bit-shift = <21>;
 		reg = <0x0558>;
 	};
 
-	ehrpwm2_tbclk: ehrpwm2_tbclk@558 {
+	ehrpwm2_tbclk: clock-ehrpwm2-tbclk-22@558 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm2_tbclk";
 		clocks = <&l4_root_clk_div>;
 		ti,bit-shift = <22>;
 		reg = <0x0558>;
 	};
 
-	sys_32k_ck: sys_32k_ck {
+	sys_32k_ck: clock-sys-32k {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sys_32k_ck";
 		clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x6c4>;
@@ -1513,97 +1696,110 @@
 };
 
 &cm_core_aon {
-	mpu_cm: mpu-cm@300 {
+	mpu_cm: clock@300 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "mpu_cm";
 		reg = <0x300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x300 0x100>;
 
-		mpu_clkctrl: mpu-clkctrl@20 {
+		mpu_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "mpu_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 
 	};
 
-	dsp1_cm: dsp1-cm@400 {
+	dsp1_cm: clock@400 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "dsp1_cm";
 		reg = <0x400 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x400 0x100>;
 
-		dsp1_clkctrl: dsp1-clkctrl@20 {
+		dsp1_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "dsp1_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 
 	};
 
-	ipu_cm: ipu-cm@500 {
+	ipu_cm: clock@500 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "ipu_cm";
 		reg = <0x500 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x500 0x100>;
 
-		ipu1_clkctrl: ipu1-clkctrl@20 {
+		ipu1_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "ipu1_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 			assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>;
 			assigned-clock-parents = <&dpll_core_h22x2_ck>;
 		};
 
-		ipu_clkctrl: ipu-clkctrl@50 {
+		ipu_clkctrl: clock@50 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "ipu_clkctrl";
 			reg = <0x50 0x34>;
 			#clock-cells = <2>;
 		};
 
 	};
 
-	dsp2_cm: dsp2-cm@600 {
+	dsp2_cm: clock@600 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "dsp2_cm";
 		reg = <0x600 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x600 0x100>;
 
-		dsp2_clkctrl: dsp2-clkctrl@20 {
+		dsp2_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "dsp2_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 
 	};
 
-	rtc_cm: rtc-cm@700 {
+	rtc_cm: clock@700 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "rtc_cm";
 		reg = <0x700 0x60>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x700 0x60>;
 
-		rtc_clkctrl: rtc-clkctrl@20 {
+		rtc_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "rtc_clkctrl";
 			reg = <0x20 0x28>;
 			#clock-cells = <2>;
 		};
 	};
 
-	vpe_cm: vpe-cm@760 {
+	vpe_cm: clock@760 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "vpe_cm";
 		reg = <0x760 0xc>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x760 0xc>;
 
-		vpe_clkctrl: vpe-clkctrl@0 {
+		vpe_clkctrl: clock@0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "vpe_clkctrl";
 			reg = <0x0 0xc>;
 			#clock-cells = <2>;
 		};
@@ -1612,212 +1808,242 @@
 };
 
 &cm_core {
-	coreaon_cm: coreaon-cm@600 {
+	coreaon_cm: clock@600 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "coreaon_cm";
 		reg = <0x600 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x600 0x100>;
 
-		coreaon_clkctrl: coreaon-clkctrl@20 {
+		coreaon_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "coreaon_clkctrl";
 			reg = <0x20 0x1c>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l3main1_cm: l3main1-cm@700 {
+	l3main1_cm: clock@700 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3main1_cm";
 		reg = <0x700 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x700 0x100>;
 
-		l3main1_clkctrl: l3main1-clkctrl@20 {
+		l3main1_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3main1_clkctrl";
 			reg = <0x20 0x74>;
 			#clock-cells = <2>;
 		};
 
 	};
 
-	ipu2_cm: ipu2-cm@900 {
+	ipu2_cm: clock@900 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "ipu2_cm";
 		reg = <0x900 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x900 0x100>;
 
-		ipu2_clkctrl: ipu2-clkctrl@20 {
+		ipu2_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "ipu2_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 
 	};
 
-	dma_cm: dma-cm@a00 {
+	dma_cm: clock@a00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "dma_cm";
 		reg = <0xa00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xa00 0x100>;
 
-		dma_clkctrl: dma-clkctrl@20 {
+		dma_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "dma_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	emif_cm: emif-cm@b00 {
+	emif_cm: clock@b00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "emif_cm";
 		reg = <0xb00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xb00 0x100>;
 
-		emif_clkctrl: emif-clkctrl@20 {
+		emif_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "emif_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	atl_cm: atl-cm@c00 {
+	atl_cm: clock@c00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "atl_cm";
 		reg = <0xc00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xc00 0x100>;
 
-		atl_clkctrl: atl-clkctrl@0 {
+		atl_clkctrl: clock@0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "atl_clkctrl";
 			reg = <0x0 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l4cfg_cm: l4cfg-cm@d00 {
+	l4cfg_cm: clock@d00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4cfg_cm";
 		reg = <0xd00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xd00 0x100>;
 
-		l4cfg_clkctrl: l4cfg-clkctrl@20 {
+		l4cfg_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4cfg_clkctrl";
 			reg = <0x20 0x84>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l3instr_cm: l3instr-cm@e00 {
+	l3instr_cm: clock@e00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3instr_cm";
 		reg = <0xe00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xe00 0x100>;
 
-		l3instr_clkctrl: l3instr-clkctrl@20 {
+		l3instr_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3instr_clkctrl";
 			reg = <0x20 0xc>;
 			#clock-cells = <2>;
 		};
 	};
 
-	iva_cm: iva-cm@f00 {
+	iva_cm: clock@f00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "iva_cm";
 		reg = <0xf00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0xf00 0x100>;
 
-		iva_clkctrl: iva-clkctrl@20 {
+		iva_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "iva_clkctrl";
 			reg = <0x20 0xc>;
 			#clock-cells = <2>;
 		};
 	};
 
-	cam_cm: cam-cm@1000 {
+	cam_cm: clock@1000 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "cam_cm";
 		reg = <0x1000 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1000 0x100>;
 
-		cam_clkctrl: cam-clkctrl@20 {
+		cam_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "cam_clkctrl";
 			reg = <0x20 0x2c>;
 			#clock-cells = <2>;
 		};
 	};
 
-	dss_cm: dss-cm@1100 {
+	dss_cm: clock@1100 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "dss_cm";
 		reg = <0x1100 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1100 0x100>;
 
-		dss_clkctrl: dss-clkctrl@20 {
+		dss_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "dss_clkctrl";
 			reg = <0x20 0x14>;
 			#clock-cells = <2>;
 		};
 	};
 
-	gpu_cm: gpu-cm@1200 {
+	gpu_cm: clock@1200 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "gpu_cm";
 		reg = <0x1200 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1200 0x100>;
 
-		gpu_clkctrl: gpu-clkctrl@20 {
+		gpu_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "gpu_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l3init_cm: l3init-cm@1300 {
+	l3init_cm: clock@1300 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3init_cm";
 		reg = <0x1300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1300 0x100>;
 
-		l3init_clkctrl: l3init-clkctrl@20 {
+		l3init_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3init_clkctrl";
 			reg = <0x20 0x6c>, <0xe0 0x14>;
 			#clock-cells = <2>;
 		};
 
-		pcie_clkctrl: pcie-clkctrl@b0 {
+		pcie_clkctrl: clock@b0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "pcie_clkctrl";
 			reg = <0xb0 0xc>;
 			#clock-cells = <2>;
 		};
 
-		gmac_clkctrl: gmac-clkctrl@d0 {
+		gmac_clkctrl: clock@d0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "gmac_clkctrl";
 			reg = <0xd0 0x4>;
 			#clock-cells = <2>;
 		};
 
 	};
 
-	l4per_cm: l4per-cm@1700 {
+	l4per_cm: clock@1700 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4per_cm";
 		reg = <0x1700 0x300>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1700 0x300>;
 
-		l4per_clkctrl: l4per-clkctrl@28 {
+		l4per_clkctrl: clock@28 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4per_clkctrl";
 			reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>;
 			#clock-cells = <2>;
 
@@ -1825,20 +2051,23 @@
 			assigned-clock-parents = <&abe_24m_fclk>;
 		};
 
-		l4sec_clkctrl: l4sec-clkctrl@1a0 {
+		l4sec_clkctrl: clock@1a0 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4sec_clkctrl";
 			reg = <0x1a0 0x2c>;
 			#clock-cells = <2>;
 		};
 
-		l4per2_clkctrl: l4per2-clkctrl@c {
+		l4per2_clkctrl: clock@c {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4per2_clkctrl";
 			reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>;
 			#clock-cells = <2>;
 		};
 
-		l4per3_clkctrl: l4per3-clkctrl@14 {
+		l4per3_clkctrl: clock@14 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4per3_clkctrl";
 			reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1847,15 +2076,17 @@
 };
 
 &prm {
-	wkupaon_cm: wkupaon-cm@1800 {
+	wkupaon_cm: clock@1800 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "wkupaon_cm";
 		reg = <0x1800 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1800 0x100>;
 
-		wkupaon_clkctrl: wkupaon-clkctrl@20 {
+		wkupaon_clkctrl: clock@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "wkupaon_clkctrl";
 			reg = <0x20 0x6c>;
 			#clock-cells = <2>;
 		};
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
index cfb239d5186a..dd03e3860f97 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -22,14 +22,14 @@
 	gpio_keys: gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		cover {
+		key-cover {
 			label = "Cover";
 			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
 			linux,code = <SW_LID>;
@@ -41,7 +41,7 @@
 	leds: leds {
 		compatible = "gpio-leds";
 
-		on {
+		led {
 			label = "e60k02:white:on";
 			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
@@ -104,7 +104,16 @@
 	clock-frequency = <100000>;
 	status = "okay";
 
-	/* TODO: CYTTSP5 touch controller at 0x24 */
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cyttsp5_gpio>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&ldo5_reg>;
+	};
 
 	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
 
@@ -302,6 +311,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git a/arch/arm/boot/dts/e70k02.dtsi b/arch/arm/boot/dts/e70k02.dtsi
new file mode 100644
index 000000000000..4e1bf080eaca
--- /dev/null
+++ b/arch/arm/boot/dts/e70k02.dtsi
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * and
+ * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd
+ *
+ * Netronix E70K02 board common.
+ * This board is equipped with different SoCs and
+ * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and
+ * the Tolino Shine 3 (with i.MX6SL)
+ */
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-cover {
+			label = "Cover";
+			gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		key-pageup {
+			label = "PageUp";
+			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PAGEUP>;
+		};
+
+		key-pagedown {
+			label = "PageDown";
+			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PAGEDOWN>;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "e70k02:white:on";
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	lm3630a: backlight@36 {
+		reg = <0x36>;
+		compatible = "ti,lm3630a";
+		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0>;
+			label = "backlight_warm";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+
+		led@1 {
+			reg = <1>;
+			led-sources = <1>;
+			label = "backlight_cold";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+	};
+
+	/* TODO: KX122 acceleration sensor a 0x1e */
+
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cyttsp5_gpio>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&ldo5_reg>;
+	};
+
+	/* TODO: SY7636 PMIC for E Ink at 0x62 */
+
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	ricoh619: pmic@32 {
+		compatible = "ricoh,rc5t619";
+		reg = <0x32>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		system-power-controller;
+
+		regulators {
+			dcdc1_reg: DCDC1 {
+				regulator-name = "DCDC1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <900000>;
+					regulator-suspend-min-microvolt = <900000>;
+				};
+			};
+
+			/* Core3_3V3 */
+			dcdc2_reg: DCDC2 {
+				regulator-name = "DCDC2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3300000>;
+					regulator-suspend-min-microvolt = <3300000>;
+				};
+			};
+
+			dcdc3_reg: DCDC3 {
+				regulator-name = "DCDC3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V2 */
+			dcdc4_reg: DCDC4 {
+				regulator-name = "DCDC4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V8 */
+			dcdc5_reg: DCDC5 {
+				regulator-name = "DCDC5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1700000>;
+					regulator-suspend-min-microvolt = <1700000>;
+				};
+			};
+
+			ldo1_reg: LDO1  {
+				regulator-name = "LDO1";
+				regulator-boot-on;
+			};
+
+			/* Core1_3V3 */
+			ldo2_reg: LDO2  {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3000000>;
+					regulator-suspend-min-microvolt = <3000000>;
+				};
+			};
+
+			/* Core5_1V2 */
+			ldo3_reg: LDO3  {
+				regulator-name = "LDO3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-boot-on;
+			};
+
+			/* SPD_3V3 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* DDR_0V6 */
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* VDD_PWM */
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-boot-on;
+			};
+
+			/* ldo_1v8 */
+			ldo8_reg: LDO8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "LDO9";
+				regulator-boot-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "LDO10";
+				regulator-boot-on;
+			};
+
+			ldortc1_reg: LDORTC1  {
+				regulator-name = "LDORTC1";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&snvs_rtc {
+	/* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */
+	status = "disabled";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
index 57a028a69373..ce5221c6b358 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/ecx-common.dtsi
@@ -9,11 +9,11 @@
 	};
 
 	psci {
-		compatible	= "arm,psci";
-		method		= "smc";
-		cpu_suspend	= <0x84000002>;
-		cpu_off		= <0x84000004>;
-		cpu_on		= <0x84000006>;
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000002>;
+		cpu_off = <0x84000004>;
+		cpu_on = <0x84000006>;
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
index d87ee4794f83..9698801cbcfb 100644
--- a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
+++ b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
@@ -5,7 +5,7 @@
 
 / {
 	elpida_ECB240ABACN: lpddr2 {
-		compatible	= "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+		compatible	= "elpida,ECB240ABACN","jedec,lpddr2-s4";
 		density		= <2048>;
 		io-width	= <32>;
 
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 0a27f034dd6b..89495dd37358 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -80,7 +80,7 @@
 	};
 
 	ethernet@20000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
+		compatible = "smsc,lan9221", "smsc,lan9115";
 		reg = <0x20000000 0x10000>;
 		phy-mode = "mii";
 		interrupt-parent = <&gpio0>;
diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
new file mode 100644
index 000000000000..f23a25cce119
--- /dev/null
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7523.dtsi"
+
+/ {
+	model = "Airoha EN7523 Evaluation Board";
+	compatible = "airoha,en7523-evb", "airoha,en7523";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+		stdout-path = "serial0:115200n8";
+		linux,usable-memory-range = <0x80200000 0x1fe00000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
new file mode 100644
index 000000000000..7f839331a777
--- /dev/null
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/en7523-clk.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		npu_binary@84000000 {
+			no-map;
+			reg = <0x84000000 0xA00000>;
+		};
+
+		npu_flag@84B0000 {
+			no-map;
+			reg = <0x84B00000 0x100000>;
+		};
+
+		npu_pkt@85000000 {
+			no-map;
+			reg = <0x85000000 0x1A00000>;
+		};
+
+		npu_phyaddr@86B00000 {
+			no-map;
+			reg = <0x86B00000 0x100000>;
+		};
+
+		npu_rxdesc@86D00000 {
+			no-map;
+			reg = <0x86D00000 0x100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	scu: system-controller@1fa20000 {
+		compatible = "airoha,en7523-scu";
+		reg = <0x1fa20000 0x400>,
+		      <0x1fb00000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@9000000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x09000000 0x20000>,
+		      <0x09080000 0x80000>,
+		      <0x09400000 0x2000>,
+		      <0x09500000 0x2000>,
+		      <0x09600000 0x20000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	uart1: serial@1fbf0000 {
+		compatible = "ns16550";
+		reg = <0x1fbf0000 0x30>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <1843200>;
+		status = "okay";
+	};
+
+	gpio0: gpio@1fbf0200 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0204 0x4>,
+		      <0x1fbf0200 0x4>,
+		      <0x1fbf0220 0x4>,
+		      <0x1fbf0214 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio1: gpio@1fbf0270 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0270 0x4>,
+		      <0x1fbf0260 0x4>,
+		      <0x1fbf0264 0x4>,
+		      <0x1fbf0278 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pcie0: pcie@1fa91000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa91000 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000  0x20000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie1: pcie@1fa92000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa92000 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/ep7209.dtsi
index 365931f8b48d..57bdad2c1994 100644
--- a/arch/arm/boot/dts/ep7209.dtsi
+++ b/arch/arm/boot/dts/ep7209.dtsi
@@ -10,6 +10,8 @@
 	model = "Cirrus Logic EP7209";
 	compatible = "cirrus,ep7209";
 
+	chosen { };
+
 	aliases {
 		gpio0 = &porta;
 		gpio1 = &portb;
@@ -108,6 +110,7 @@
 			compatible = "cirrus,ep7209-fb";
 			reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
 			clocks = <&clks CLPS711X_CLK_BUS>;
+			syscon = <&syscon1>;
 			status = "disabled";
 		};
 
@@ -132,7 +135,7 @@
 			#pwm-cells = <1>;
 		};
 
-		uart1: uart@80000480 {
+		uart1: serial@80000480 {
 			compatible = "cirrus,ep7209-uart";
 			reg = <0x80000480 0x80>;
 			interrupts = <12 13>;
@@ -147,6 +150,7 @@
 			reg = <0x80000500 0x4>;
 			interrupts = <15>;
 			clocks = <&clks CLPS711X_CLK_SPI>;
+			syscon = <&syscon3>;
 			status = "disabled";
 		};
 
@@ -155,7 +159,7 @@
 			reg = <0x80001100 0x80>;
 		};
 
-		uart2: uart@80001480 {
+		uart2: serial@80001480 {
 			compatible = "cirrus,ep7209-uart";
 			reg = <0x80001480 0x80>;
 			interrupts = <28 29>;
@@ -170,6 +174,7 @@
 			clocks = <&clks CLPS711X_CLK_PLL>;
 			clock-names = "pll";
 			interrupts = <32>;
+			syscon = <&syscon3>;
 			status = "disabled";
 		};
 
@@ -179,8 +184,17 @@
 		};
 	};
 
+	keypad: keypad {
+		compatible = "cirrus,ep7209-keypad";
+		interrupt-parent = <&intc>;
+		interrupts = <16>;
+		syscon = <&syscon1>;
+		status = "disabled";
+	};
+
 	mctrl: mctrl {
 		compatible = "cirrus,ep7209-mctrl-gpio";
+		gpio,syscon-dev = <&syscon1 0 0>;
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts
index da076479c8e2..7fb532f227af 100644
--- a/arch/arm/boot/dts/ep7211-edb7211.dts
+++ b/arch/arm/boot/dts/ep7211-edb7211.dts
@@ -7,7 +7,7 @@
 	model = "Cirrus Logic EP7211 Development Board";
 	compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209";
 
-	memory {
+	memory@c0000000 {
 		device_type = "memory";
 		reg = <0xc0000000 0x02000000>;
 	};
diff --git a/arch/arm/boot/dts/exynos-pinctrl.h b/arch/arm/boot/dts/exynos-pinctrl.h
new file mode 100644
index 000000000000..e3a6df95281c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos-pinctrl.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Samsung Exynos DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__
+#define __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__
+
+#define EXYNOS_PIN_PULL_NONE		0
+#define EXYNOS_PIN_PULL_DOWN		1
+#define EXYNOS_PIN_PULL_UP		3
+
+/* Pin function in power down mode */
+#define EXYNOS_PIN_PDN_OUT0		0
+#define EXYNOS_PIN_PDN_OUT1		1
+#define EXYNOS_PIN_PDN_INPUT		2
+#define EXYNOS_PIN_PDN_PREV		3
+
+/* Drive strengths for Exynos3250, Exynos4 (all) and Exynos5250 */
+#define EXYNOS4_PIN_DRV_LV1		0
+#define EXYNOS4_PIN_DRV_LV2		2
+#define EXYNOS4_PIN_DRV_LV3		1
+#define EXYNOS4_PIN_DRV_LV4		3
+
+/* Drive strengths for Exynos5260 */
+#define EXYNOS5260_PIN_DRV_LV1		0
+#define EXYNOS5260_PIN_DRV_LV2		1
+#define EXYNOS5260_PIN_DRV_LV4		2
+#define EXYNOS5260_PIN_DRV_LV6		3
+
+/*
+ * Drive strengths for Exynos5410, Exynos542x, Exynos5800 and Exynos850 (except
+ * GPIO_HSI block)
+ */
+#define EXYNOS5420_PIN_DRV_LV1		0
+#define EXYNOS5420_PIN_DRV_LV2		1
+#define EXYNOS5420_PIN_DRV_LV3		2
+#define EXYNOS5420_PIN_DRV_LV4		3
+
+#define EXYNOS_PIN_FUNC_INPUT		0
+#define EXYNOS_PIN_FUNC_OUTPUT		1
+#define EXYNOS_PIN_FUNC_2		2
+#define EXYNOS_PIN_FUNC_3		3
+#define EXYNOS_PIN_FUNC_4		4
+#define EXYNOS_PIN_FUNC_5		5
+#define EXYNOS_PIN_FUNC_6		6
+#define EXYNOS_PIN_FUNC_EINT		0xf
+#define EXYNOS_PIN_FUNC_F		EXYNOS_PIN_FUNC_EINT
+
+#endif /* __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
index ecf416690a15..bc9a78f6d4b7 100644
--- a/arch/arm/boot/dts/exynos-syscon-restart.dtsi
+++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
@@ -7,7 +7,7 @@
 	poweroff: syscon-poweroff {
 		compatible = "syscon-poweroff";
 		regmap = <&pmu_system_controller>;
-		offset = <0x330C>; /* PS_HOLD_CONTROL */
+		offset = <0x330c>; /* PS_HOLD_CONTROL */
 		mask = <0x5200>; /* reset value */
 	};
 
diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
index a1e22f630638..660cc7fac4db 100644
--- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts
+++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
@@ -16,6 +16,10 @@
 	model = "Samsung ARTIK5 evaluation board";
 	compatible = "samsung,artik5-eval", "samsung,artik5",
 			"samsung,exynos3250", "samsung,exynos3";
+
+	aliases {
+		mmc0 = &mshc_2;
+	};
 };
 
 &mshc_2 {
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 829c05b2c405..3fdd922e635c 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -17,6 +17,11 @@
 / {
 	compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3";
 
+	aliases {
+		mmc0 = &mshc_0;
+		mmc1 = &mshc_1;
+	};
+
 	chosen {
 		stdout-path = &serial_2;
 	};
@@ -321,6 +326,7 @@
 	vmmc-supply = <&ldo12_reg>;
 	clock-frequency = <100000000>;
 	max-frequency = <100000000>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
@@ -356,15 +362,15 @@
 };
 
 &pinctrl_1 {
-	bten: bten {
-		samsung,pins ="gpx1-7";
+	bten: bten-pins {
+		samsung,pins = "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
 		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
-	wlanen: wlanen {
+	wlanen: wlanen-pins {
 		samsung,pins = "gpx2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -372,12 +378,12 @@
 		samsung,pin-val = <1>;
 	};
 
-	s2mps14_irq: s2mps14-irq {
+	s2mps14_irq: s2mps14-irq-pins {
 		samsung,pins = "gpx3-5";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bthostwake: bthostwake {
+	bthostwake: bthostwake-pins {
 		samsung,pins = "gpx3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -385,7 +391,7 @@
 		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	btwake: btwake {
+	btwake: btwake-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index fae046e08a5d..2de877d4ccc5 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -22,6 +22,7 @@
 
 	aliases {
 		i2c7 = &i2c_max77836;
+		mmc0 = &mshc_0;
 	};
 
 	memory@40000000 {
@@ -31,7 +32,7 @@
 
 	firmware@205f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0205F000 0x1000>;
+		reg = <0x0205f000 0x1000>;
 	};
 
 	gpio-keys {
@@ -69,7 +70,7 @@
 			reg = <0x25>;
 			wakeup-source;
 
-			muic: max77836-muic {
+			extcon {
 				compatible = "maxim,max77836-muic";
 			};
 
@@ -142,7 +143,7 @@
 	assigned-clock-rates = <6000000>;
 
 	thermistor-ap {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <100000>;
 		pulldown-ohm = <100000>;
@@ -150,7 +151,7 @@
 	};
 
 	thermistor-battery {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <100000>;
 		pulldown-ohm = <100000>;
@@ -438,12 +439,12 @@
 	broken-cd;
 	non-removable;
 	cap-mmc-highspeed;
-	desc-num = <4>;
 	mmc-hs200-1_8v;
 	card-detect-delay = <200>;
 	vmmc-supply = <&vemmc_reg>;
 	clock-frequency = <100000000>;
 	max-frequency = <100000000>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index dff3c6e3aa1f..011ba2eff29e 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -9,50 +9,25 @@
  * tree nodes are listed in this file.
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
 
 #define PIN_IN(_pin, _pull, _drv)					\
-	_pin {								\
+	pin- ## _pin {							\
 		samsung,pins = #_pin;					\
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;		\
 		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
 	}
 
-#define PIN_OUT(_pin, _drv)						\
-	_pin {								\
-		samsung,pins = #_pin;					\
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;	\
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;		\
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
-	}
-
-#define PIN_OUT_SET(_pin, _val, _drv)					\
-	_pin {								\
-		samsung,pins = #_pin;					\
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;	\
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;		\
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
-		samsung,pin-val = <_val>;				\
-	}
-
-#define PIN_CFG(_pin, _sel, _pull, _drv)				\
-	_pin {								\
-		samsung,pins = #_pin;					\
-		samsung,pin-function = <_sel>;				\
-		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
-	}
-
 #define PIN_SLP(_pin, _mode, _pull)					\
-	_pin {								\
+	pin- ## _pin {							\
 		samsung,pins = #_pin;					\
 		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
 		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
 	}
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -60,7 +35,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -68,7 +43,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -76,7 +51,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -84,7 +59,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -92,7 +67,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -100,7 +75,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -108,84 +83,84 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpb-0", "gpb-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -193,7 +168,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -201,63 +176,63 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpc1-3", "gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpd0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpd0-2", "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpd0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	mipi0_clk: mipi0-clk {
+	mipi0_clk: mipi0-clk-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -266,22 +241,22 @@
 };
 
 &pinctrl_1 {
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpe2: gpe2 {
+	gpe2: gpe2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -289,7 +264,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk1: gpk1 {
+	gpk1: gpk1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -297,7 +272,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk2: gpk2 {
+	gpk2: gpk2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -305,7 +280,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl0: gpl0 {
+	gpl0: gpl0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -313,7 +288,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm0: gpm0 {
+	gpm0: gpm0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -321,7 +296,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm1: gpm1 {
+	gpm1: gpm1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -329,7 +304,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm2: gpm2 {
+	gpm2: gpm2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -337,7 +312,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm3: gpm3 {
+	gpm3: gpm3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -345,7 +320,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm4: gpm4 {
+	gpm4: gpm4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -353,7 +328,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -370,7 +345,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -387,7 +362,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -395,7 +370,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -403,126 +378,126 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpk0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpk0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpk0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_rdqs: sd0-rdqs {
+	sd0_rdqs: sd0-rdqs-pins {
 		samsung,pins = "gpk0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpk0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpk1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpk1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpk1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpk1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpk2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpk2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpk2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpk2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_io: cam-port-b-io {
+	cam_port_b_io: cam-port-b-io-pins {
 		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
 				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
@@ -531,35 +506,35 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_b_clk_active: cam-port-b-clk-active {
+	cam_port_b_clk_active: cam-port-b-clk-active-pins {
 		samsung,pins = "gpm2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
+	cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
 		samsung,pins = "gpm2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_i2c0: fimc-is-i2c0 {
+	fimc_is_i2c0: fimc-is-i2c0-pins {
 		samsung,pins = "gpm4-0", "gpm4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_i2c1: fimc-is-i2c1 {
+	fimc_is_i2c1: fimc-is-i2c1-pins {
 		samsung,pins = "gpm4-2", "gpm4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_uart: fimc-is-uart {
+	fimc_is_uart: fimc-is-uart-pins {
 		samsung,pins = "gpm3-5", "gpm3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index d64ccf4b7d32..88fb3e68ff02 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -19,9 +19,12 @@
 / {
 	model = "Samsung Rinato board";
 	compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
+	chassis-type = "watch";
 
 	aliases {
 		i2c7 = &i2c_max77836;
+		mmc0 = &mshc_0;
+		mmc1 = &mshc_1;
 	};
 
 	chosen {
@@ -35,7 +38,7 @@
 
 	firmware@205f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0205F000 0x1000>;
+		reg = <0x0205f000 0x1000>;
 	};
 
 	gpio-keys {
@@ -69,7 +72,7 @@
 			reg = <0x25>;
 			wakeup-source;
 
-			muic: max77836-muic {
+			extcon {
 				compatible = "maxim,max77836-muic";
 			};
 
@@ -142,7 +145,7 @@
 	assigned-clock-rates = <6000000>;
 
 	thermistor-ap {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <100000>;
 		pulldown-ohm = <100000>;
@@ -150,7 +153,7 @@
 	};
 
 	thermistor-battery {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <100000>;
 		pulldown-ohm = <100000>;
@@ -249,7 +252,7 @@
 	i80-if-timings {
 		cs-setup = <0>;
 		wr-setup = <0>;
-		wr-act = <1>;
+		wr-active = <1>;
 		wr-hold = <0>;
 	};
 };
@@ -618,12 +621,12 @@
 	broken-cd;
 	non-removable;
 	cap-mmc-highspeed;
-	desc-num = <4>;
 	mmc-hs200-1_8v;
 	card-detect-delay = <200>;
 	vmmc-supply = <&ldo12_reg>;
 	clock-frequency = <100000000>;
 	max-frequency = <100000000>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
@@ -653,7 +656,7 @@
 	mmc-pwrseq = <&wlan_pwrseq>;
 
 	brcmf: wifi@1 {
-		compatible = "brcm,bcm4334-fmac";
+		compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
 		reg = <1>;
 
 		interrupt-parent = <&gpx1>;
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 77ab7193b903..bd37f1b587f0 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -28,9 +28,6 @@
 	aliases {
 		pinctrl0 = &pinctrl_0;
 		pinctrl1 = &pinctrl_1;
-		mshc0 = &mshc_0;
-		mshc1 = &mshc_1;
-		mshc2 = &mshc_2;
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		i2c0 = &i2c_0;
@@ -46,10 +43,172 @@
 		serial2 = &serial_2;
 	};
 
+	bus_dmc: bus-dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_dmc CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+
+		bus_dmc_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+				opp-microvolt = <825000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <875000>;
+			};
+		};
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_200>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_isp: bus-isp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_266>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_isp_opp_table>;
+		status = "disabled";
+
+		bus_isp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+		};
+	};
+
+	bus_lcd0: bus-lcd0 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_leftbus: bus-leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mcuisp: bus-mcuisp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_mcuisp_opp_table>;
+		status = "disabled";
+
+		bus_mcuisp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+			};
+		};
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peril: bus-peril {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peril_opp_table>;
+		status = "disabled";
+
+		bus_peril_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+
+	bus_rightbus: bus-rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
@@ -118,6 +277,31 @@
 		clock-output-names = "xtcxo";
 	};
 
+	bus_leftbus_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-80000000 {
+			opp-hz = /bits/ 64 <80000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1000000>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -159,7 +343,7 @@
 		};
 
 		pmu_system_controller: system-controller@10020000 {
-			compatible = "samsung,exynos3250-pmu", "syscon";
+			compatible = "samsung,exynos3250-pmu", "simple-mfd", "syscon";
 			reg = <0x10020000 0x4000>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -167,45 +351,44 @@
 			clock-names = "clkout8";
 			clocks = <&cmu CLK_FIN_PLL>;
 			#clock-cells = <1>;
-		};
 
-		mipi_phy: video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			#phy-cells = <1>;
-			syscon = <&pmu_system_controller>;
+			mipi_phy: mipi-phy {
+				compatible = "samsung,s5pv210-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
 		pd_cam: power-domain@10023c00 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C00 0x20>;
+			reg = <0x10023c00 0x20>;
 			#power-domain-cells = <0>;
 			label = "CAM";
 		};
 
 		pd_mfc: power-domain@10023c40 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C40 0x20>;
+			reg = <0x10023c40 0x20>;
 			#power-domain-cells = <0>;
 			label = "MFC";
 		};
 
 		pd_g3d: power-domain@10023c60 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C60 0x20>;
+			reg = <0x10023c60 0x20>;
 			#power-domain-cells = <0>;
 			label = "G3D";
 		};
 
 		pd_lcd0: power-domain@10023c80 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C80 0x20>;
+			reg = <0x10023c80 0x20>;
 			#power-domain-cells = <0>;
 			label = "LCD0";
 		};
 
 		pd_isp: power-domain@10023ca0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
+			reg = <0x10023ca0 0x20>;
 			#power-domain-cells = <0>;
 			label = "ISP";
 		};
@@ -222,7 +405,7 @@
 
 		cmu_dmc: clock-controller@105c0000 {
 			compatible = "samsung,exynos3250-cmu-dmc";
-			reg = <0x105C0000 0x2000>;
+			reg = <0x105c0000 0x2000>;
 			#clock-cells = <1>;
 		};
 
@@ -237,7 +420,7 @@
 
 		tmu: tmu@100c0000 {
 			compatible = "samsung,exynos3250-tmu";
-			reg = <0x100C0000 0x100>;
+			reg = <0x100c0000 0x100>;
 			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_TMU_APBIF>;
 			clock-names = "tmu_apbif";
@@ -258,7 +441,8 @@
 		};
 
 		timer@10050000 {
-			compatible = "samsung,exynos4210-mct";
+			compatible = "samsung,exynos3250-mct",
+				     "samsung,exynos4210-mct";
 			reg = <0x10050000 0x800>;
 			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
@@ -330,7 +514,7 @@
 
 		dsi_0: dsi@11c80000 {
 			compatible = "samsung,exynos3250-mipi-dsi";
-			reg = <0x11C80000 0x10000>;
+			reg = <0x11c80000 0x10000>;
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,phy-type = <0>;
 			power-domains = <&pd_lcd0>;
@@ -353,7 +537,7 @@
 			#iommu-cells = <0>;
 		};
 
-		hsotg: hsotg@12480000 {
+		hsotg: usb@12480000 {
 			compatible = "samsung,s3c6400-hsotg";
 			reg = <0x12480000 0x20000>;
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
@@ -364,7 +548,7 @@
 			status = "disabled";
 		};
 
-		mshc_0: mshc@12510000 {
+		mshc_0: mmc@12510000 {
 			compatible = "samsung,exynos5420-dw-mshc";
 			reg = <0x12510000 0x1000>;
 			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
@@ -376,7 +560,7 @@
 			status = "disabled";
 		};
 
-		mshc_1: mshc@12520000 {
+		mshc_1: mmc@12520000 {
 			compatible = "samsung,exynos5420-dw-mshc";
 			reg = <0x12520000 0x1000>;
 			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
@@ -388,7 +572,7 @@
 			status = "disabled";
 		};
 
-		mshc_2: mshc@12530000 {
+		mshc_2: mmc@12530000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12530000 0x1000>;
 			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
@@ -400,9 +584,9 @@
 			status = "disabled";
 		};
 
-		exynos_usbphy: exynos-usbphy@125b0000 {
+		exynos_usbphy: usb-phy@125b0000 {
 			compatible = "samsung,exynos3250-usb2-phy";
-			reg = <0x125B0000 0x100>;
+			reg = <0x125b0000 0x100>;
 			samsung,pmureg-phandle = <&pmu_system_controller>;
 			clocks = <&cmu CLK_USBOTG>, <&cmu CLK_SCLK_UPLL>;
 			clock-names = "phy", "ref";
@@ -410,31 +594,27 @@
 			status = "disabled";
 		};
 
-		pdma0: pdma@12680000 {
+		pdma0: dma-controller@12680000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@12690000 {
+		pdma1: dma-controller@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
 		adc: adc@126c0000 {
 			compatible = "samsung,exynos3250-adc";
-			reg = <0x126C0000 0x100>;
+			reg = <0x126c0000 0x100>;
 			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "adc", "sclk";
 			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
@@ -477,7 +657,7 @@
 		};
 
 		mfc: codec@13400000 {
-			compatible = "samsung,mfc-v7";
+			compatible = "samsung,exynos3250-mfc", "samsung,mfc-v7";
 			reg = <0x13400000 0x10000>;
 			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "mfc", "sclk_mfc";
@@ -585,7 +765,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138A0000 0x100>;
+			reg = <0x138a0000 0x100>;
 			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C4>;
 			clock-names = "i2c";
@@ -598,7 +778,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138B0000 0x100>;
+			reg = <0x138b0000 0x100>;
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C5>;
 			clock-names = "i2c";
@@ -611,7 +791,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138C0000 0x100>;
+			reg = <0x138c0000 0x100>;
 			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C6>;
 			clock-names = "i2c";
@@ -624,7 +804,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138D0000 0x100>;
+			reg = <0x138d0000 0x100>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C7>;
 			clock-names = "i2c";
@@ -680,7 +860,7 @@
 
 		pwm: pwm@139d0000 {
 			compatible = "samsung,exynos4210-pwm";
-			reg = <0x139D0000 0x1000>;
+			reg = <0x139d0000 0x1000>;
 			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
@@ -763,182 +943,6 @@
 			clock-names = "ppmu";
 			status = "disabled";
 		};
-
-		bus_dmc: bus-dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu_dmc CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_dmc_opp_table: opp-table1 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <800000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <825000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <875000>;
-			};
-		};
-
-		bus_leftbus: bus-leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_rightbus: bus-rightbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_GDR>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_lcd0: bus-lcd0 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_200>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mcuisp: bus-mcuisp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_mcuisp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_isp: bus-isp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_266>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_isp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peril: bus-peril {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_DIV_ACLK_100>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peril_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&cmu CLK_SCLK_MFC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_leftbus_opp_table: opp-table2 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <1000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <1000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <1000000>;
-			};
-		};
-
-		bus_mcuisp_opp_table: opp-table3 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-			};
-		};
-
-		bus_isp_opp_table: opp-table4 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp-300000000 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_peril_opp_table: opp-table5 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-80000000 {
-				opp-hz = /bits/ 64 <80000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
index 021d9fc1b492..27a1a8952665 100644
--- a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
@@ -10,7 +10,7 @@
 / {
 thermal-zones {
 	cpu_thermal: cpu-thermal {
-		thermal-sensors = <&tmu 0>;
+		thermal-sensors = <&tmu>;
 		polling-delay-passive = <0>;
 		polling-delay = <0>;
 		trips {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index eab77a66ae8f..8dd6976ab0a7 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -65,7 +65,7 @@
 
 		clock_audss: clock-controller@3810000 {
 			compatible = "samsung,exynos4210-audss-clock";
-			reg = <0x03810000 0x0C>;
+			reg = <0x03810000 0x0c>;
 			#clock-cells = <1>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
 				 <&clock CLK_SCLK_AUDIO0>,
@@ -105,36 +105,30 @@
 			reg = <0x12570000 0x14>;
 		};
 
-		mipi_phy: video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			#phy-cells = <1>;
-			syscon = <&pmu_system_controller>;
-		};
-
 		pd_mfc: power-domain@10023c40 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C40 0x20>;
+			reg = <0x10023c40 0x20>;
 			#power-domain-cells = <0>;
 			label = "MFC";
 		};
 
 		pd_g3d: power-domain@10023c60 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C60 0x20>;
+			reg = <0x10023c60 0x20>;
 			#power-domain-cells = <0>;
 			label = "G3D";
 		};
 
 		pd_lcd0: power-domain@10023c80 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C80 0x20>;
+			reg = <0x10023c80 0x20>;
 			#power-domain-cells = <0>;
 			label = "LCD0";
 		};
 
 		pd_tv: power-domain@10023c20 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C20 0x20>;
+			reg = <0x10023c20 0x20>;
 			#power-domain-cells = <0>;
 			power-domains = <&pd_lcd0>;
 			label = "TV";
@@ -142,21 +136,21 @@
 
 		pd_cam: power-domain@10023c00 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C00 0x20>;
+			reg = <0x10023c00 0x20>;
 			#power-domain-cells = <0>;
 			label = "CAM";
 		};
 
 		pd_gps: power-domain@10023ce0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CE0 0x20>;
+			reg = <0x10023ce0 0x20>;
 			#power-domain-cells = <0>;
 			label = "GPS";
 		};
 
 		pd_gps_alive: power-domain@10023d00 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023D00 0x20>;
+			reg = <0x10023d00 0x20>;
 			#power-domain-cells = <0>;
 			label = "GPS alive";
 		};
@@ -181,16 +175,21 @@
 		};
 
 		pmu_system_controller: system-controller@10020000 {
-			compatible = "samsung,exynos4210-pmu", "syscon";
+			compatible = "samsung,exynos4210-pmu", "simple-mfd", "syscon";
 			reg = <0x10020000 0x4000>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
+
+			mipi_phy: mipi-phy {
+				compatible = "samsung,s5pv210-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
 		dsi_0: dsi@11c80000 {
 			compatible = "samsung,exynos4210-mipi-dsi";
-			reg = <0x11C80000 0x10000>;
+			reg = <0x11c80000 0x10000>;
 			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&pd_lcd0>;
 			phys = <&mipi_phy 1>;
@@ -309,14 +308,14 @@
 
 		keypad: keypad@100a0000 {
 			compatible = "samsung,s5pv210-keypad";
-			reg = <0x100A0000 0x100>;
+			reg = <0x100a0000 0x100>;
 			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_KEYIF>;
 			clock-names = "keypad";
 			status = "disabled";
 		};
 
-		sdhci_0: sdhci@12510000 {
+		sdhci_0: mmc@12510000 {
 			compatible = "samsung,exynos4210-sdhci";
 			reg = <0x12510000 0x100>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -325,7 +324,7 @@
 			status = "disabled";
 		};
 
-		sdhci_1: sdhci@12520000 {
+		sdhci_1: mmc@12520000 {
 			compatible = "samsung,exynos4210-sdhci";
 			reg = <0x12520000 0x100>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -334,7 +333,7 @@
 			status = "disabled";
 		};
 
-		sdhci_2: sdhci@12530000 {
+		sdhci_2: mmc@12530000 {
 			compatible = "samsung,exynos4210-sdhci";
 			reg = <0x12530000 0x100>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -343,7 +342,7 @@
 			status = "disabled";
 		};
 
-		sdhci_3: sdhci@12540000 {
+		sdhci_3: mmc@12540000 {
 			compatible = "samsung,exynos4210-sdhci";
 			reg = <0x12540000 0x100>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -352,9 +351,9 @@
 			status = "disabled";
 		};
 
-		exynos_usbphy: exynos-usbphy@125b0000 {
+		exynos_usbphy: usb-phy@125b0000 {
 			compatible = "samsung,exynos4210-usb2-phy";
-			reg = <0x125B0000 0x100>;
+			reg = <0x125b0000 0x100>;
 			samsung,pmureg-phandle = <&pmu_system_controller>;
 			clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
 			clock-names = "phy", "ref";
@@ -362,7 +361,7 @@
 			status = "disabled";
 		};
 
-		hsotg: hsotg@12480000 {
+		hsotg: usb@12480000 {
 			compatible = "samsung,s3c6400-hsotg";
 			reg = <0x12480000 0x20000>;
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
@@ -373,7 +372,7 @@
 			status = "disabled";
 		};
 
-		ehci: ehci@12580000 {
+		ehci: usb@12580000 {
 			compatible = "samsung,exynos4210-ehci";
 			reg = <0x12580000 0x100>;
 			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
@@ -384,7 +383,7 @@
 			phy-names = "host", "hsic0", "hsic1";
 		};
 
-		ohci: ohci@12590000 {
+		ohci: usb@12590000 {
 			compatible = "samsung,exynos4210-ohci";
 			reg = <0x12590000 0x100>;
 			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
@@ -546,7 +545,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138A0000 0x100>;
+			reg = <0x138a0000 0x100>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C4>;
 			clock-names = "i2c";
@@ -559,7 +558,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138B0000 0x100>;
+			reg = <0x138b0000 0x100>;
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C5>;
 			clock-names = "i2c";
@@ -572,7 +571,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138C0000 0x100>;
+			reg = <0x138c0000 0x100>;
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C6>;
 			clock-names = "i2c";
@@ -585,7 +584,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138D0000 0x100>;
+			reg = <0x138d0000 0x100>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C7>;
 			clock-names = "i2c";
@@ -598,14 +597,14 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-hdmiphy-i2c";
-			reg = <0x138E0000 0x100>;
+			reg = <0x138e0000 0x100>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_I2C_HDMI>;
 			clock-names = "i2c";
 			status = "disabled";
 
-			hdmi_i2c_phy: hdmiphy@38 {
-				compatible = "exynos4210-hdmiphy";
+			hdmi_i2c_phy: hdmi-phy@38 {
+				compatible = "samsung,exynos4210-hdmiphy";
 				reg = <0x38>;
 			};
 		};
@@ -657,7 +656,7 @@
 
 		pwm: pwm@139d0000 {
 			compatible = "samsung,exynos4210-pwm";
-			reg = <0x139D0000 0x1000>;
+			reg = <0x139d0000 0x1000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
@@ -669,37 +668,31 @@
 			status = "disabled";
 		};
 
-		pdma0: pdma@12680000 {
+		pdma0: dma-controller@12680000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@12690000 {
+		pdma1: dma-controller@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		mdma1: mdma@12850000 {
+		mdma1: dma-controller@12850000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 		};
 
 		fimd: fimd@11c00000 {
@@ -718,7 +711,7 @@
 
 		tmu: tmu@100c0000 {
 			interrupt-parent = <&combiner>;
-			reg = <0x100C0000 0x100>;
+			reg = <0x100c0000 0x100>;
 			interrupts = <2 4>;
 			status = "disabled";
 			#thermal-sensor-cells = <0>;
@@ -745,7 +738,7 @@
 
 		hdmi: hdmi@12d00000 {
 			compatible = "samsung,exynos4210-hdmi";
-			reg = <0x12D00000 0x70000>;
+			reg = <0x12d00000 0x70000>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
 				      "sclk_hdmiphy", "mout_hdmi";
@@ -762,7 +755,7 @@
 
 		hdmicec: cec@100b0000 {
 			compatible = "samsung,s5p-cec";
-			reg = <0x100B0000 0x200>;
+			reg = <0x100b0000 0x200>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_HDMI_CEC>;
 			clock-names = "hdmicec";
@@ -776,7 +769,7 @@
 		mixer: mixer@12c10000 {
 			compatible = "samsung,exynos4210-mixer";
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
+			reg = <0x12c10000 0x2100>, <0x12c00000 0x300>;
 			power-domains = <&pd_tv>;
 			iommus = <&sysmmu_tv>;
 			status = "disabled";
@@ -908,7 +901,7 @@
 
 		sysmmu_tv: sysmmu@12e20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12E20000 0x1000>;
+			reg = <0x12e20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 4>;
 			clock-names = "sysmmu", "master";
@@ -919,7 +912,7 @@
 
 		sysmmu_fimc0: sysmmu@11a20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A20000 0x1000>;
+			reg = <0x11a20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 2>;
 			clock-names = "sysmmu", "master";
@@ -930,7 +923,7 @@
 
 		sysmmu_fimc1: sysmmu@11a30000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A30000 0x1000>;
+			reg = <0x11a30000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 3>;
 			clock-names = "sysmmu", "master";
@@ -941,7 +934,7 @@
 
 		sysmmu_fimc2: sysmmu@11a40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A40000 0x1000>;
+			reg = <0x11a40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 4>;
 			clock-names = "sysmmu", "master";
@@ -952,7 +945,7 @@
 
 		sysmmu_fimc3: sysmmu@11a50000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A50000 0x1000>;
+			reg = <0x11a50000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 5>;
 			clock-names = "sysmmu", "master";
@@ -963,7 +956,7 @@
 
 		sysmmu_jpeg: sysmmu@11a60000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11A60000 0x1000>;
+			reg = <0x11a60000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 6>;
 			clock-names = "sysmmu", "master";
@@ -974,7 +967,7 @@
 
 		sysmmu_rotator: sysmmu@12a30000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12A30000 0x1000>;
+			reg = <0x12a30000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 0>;
 			clock-names = "sysmmu", "master";
@@ -985,7 +978,7 @@
 
 		sysmmu_fimd0: sysmmu@11e20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11E20000 0x1000>;
+			reg = <0x11e20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 2>;
 			clock-names = "sysmmu", "master";
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index 304a8ee2364c..37cd4dde53e4 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -18,12 +18,19 @@
 / {
 	model = "Samsung Galaxy S2 (GT-I9100)";
 	compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4";
+	chassis-type = "handset";
 
 	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_0;
+		mmc1 = &sdhci_2;
+		mmc2 = &sdhci_3;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -88,21 +95,21 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		vol-down {
+		key-vol-down {
 			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 			label = "volume down";
 			debounce-interval = <10>;
 		};
 
-		vol-up {
+		key-vol-up {
 			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			label = "volume up";
 			debounce-interval = <10>;
 		};
 
-		power {
+		key-power {
 			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "power";
@@ -110,7 +117,7 @@
 			wakeup-source;
 		};
 
-		ok {
+		key-ok {
 			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_OK>;
 			label = "ok";
@@ -136,7 +143,7 @@
 			compatible = "maxim,max17042";
 
 			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
 			pinctrl-0 = <&max17042_fuel_irq>;
 			pinctrl-names = "default";
@@ -147,6 +154,36 @@
 		};
 	};
 
+	i2c_s5k5baf: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpc1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpc1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+
+		image-sensor@2d {
+			compatible = "samsung,s5k5baf";
+			reg = <0x2d>;
+			vdda-supply = <&cam_io_en_reg>;
+			vddreg-supply = <&vt_core_15v_reg>;
+			vddio-supply = <&vtcam_reg>;
+			clocks = <&camera 0>;
+			clock-names = "mclk";
+			stbyn-gpios = <&gpl2 0 GPIO_ACTIVE_LOW>;
+			rstn-gpios = <&gpl2 1 GPIO_ACTIVE_LOW>;
+			clock-frequency = <24000000>;
+
+			port {
+				s5k5bafx_ep: endpoint {
+					remote-endpoint = <&csis1_ep>;
+					data-lanes = <1>;
+				};
+			};
+		};
+	};
+
 	spi-3 {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
@@ -220,7 +257,29 @@
 };
 
 &camera {
+	pinctrl-0 = <&cam_port_a_clk_active>;
+	pinctrl-names = "default";
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_CAM0>, <&clock CLK_MOUT_CAM1>;
+	assigned-clock-parents = <&clock CLK_XUSBXTI>, <&clock CLK_XUSBXTI>;
+};
+
+&csis_1 {
 	status = "okay";
+	vddcore-supply = <&vusb_reg>;
+	vddio-supply = <&vmipi_reg>;
+	clock-frequency = <160000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@4 {
+		reg = <4>;
+		csis1_ep: endpoint {
+			remote-endpoint = <&s5k5bafx_ep>;
+			data-lanes = <1>;
+			samsung,csis-hs-settle = <6>;
+		};
+	};
 };
 
 &cpu0 {
@@ -262,7 +321,8 @@
 };
 
 &fimc_1 {
-	status = "okay";
+	/* Back camera not implemented */
+	status = "disabled";
 
 	assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>;
 	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
@@ -278,7 +338,8 @@
 };
 
 &fimc_3 {
-	status = "okay";
+	/* Back camera not implemented */
+	status = "disabled";
 
 	assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>;
 	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
@@ -384,6 +445,8 @@
 		pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>;
 		pinctrl-names = "default";
 
+		charger-supply = <&charger_reg>;
+
 		regulators {
 			vadc_reg: LDO1 {
 				regulator-name = "VADC_3.3V_C210";
@@ -615,26 +678,26 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep0>;
 
-	sleep0: sleep-states {
-		gpa0-0 {
+	sleep0: sleep-state {
+		gpa0-0-pin {
 			samsung,pins = "gpa0-0";
 			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
 			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
 		};
 
-		gpa0-1 {
+		gpa0-1-pin {
 			samsung,pins = "gpa0-1";
 			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
 			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
 		};
 
-		gpa0-2 {
+		gpa0-2-pin {
 			samsung,pins = "gpa0-2";
 			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
 			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
 		};
 
-		gpa0-3 {
+		gpa0-3-pin {
 			samsung,pins = "gpa0-3";
 			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
 			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
@@ -643,19 +706,19 @@
 };
 
 &pinctrl_1 {
-	mhl_int: mhl-int {
+	mhl_int: mhl-int-pins {
 		samsung,pins = "gpf3-5";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	i2c_mhl_bus: i2c-mhl-bus {
+	i2c_mhl_bus: i2c-mhl-bus-pins {
 		samsung,pins = "gpf0-4", "gpf0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	usb_sel: usb-sel {
+	usb_sel: usb-sel-pins {
 		samsung,pins = "gpl0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -663,7 +726,7 @@
 		samsung,pin-val = <0>;
 	};
 
-	bt_en: bt-en {
+	bt_en: bt-en-pins {
 		samsung,pins = "gpl0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -671,7 +734,7 @@
 		samsung,pin-val = <0>;
 	};
 
-	bt_res: bt-res {
+	bt_res: bt-res-pins {
 		samsung,pins = "gpl1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -679,7 +742,7 @@
 		samsung,pin-val = <0>;
 	};
 
-	otg_gp: otg-gp {
+	otg_gp: otg-gp-pins {
 		samsung,pins = "gpx3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -687,23 +750,23 @@
 		samsung,pin-val = <0>;
 	};
 
-	mag_mhl_gpio: mag-mhl {
+	mag_mhl_gpio: mag-mhl-pins {
 		samsung,pins = "gpd0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max8997_irq: max8997-irq {
+	max8997_irq: max8997-irq-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max17042_fuel_irq: max17042-fuel-irq {
+	max17042_fuel_irq: max17042-fuel-irq-pins {
 		samsung,pins = "gpx2-3";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	tsp224_irq: tsp224-irq {
+	tsp224_irq: tsp224-irq-pins {
 		samsung,pins = "gpx0-4";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 	};
@@ -752,7 +815,7 @@
 	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
 
 	brcmf: wifi@1 {
-		compatible = "brcm,bcm4330-fmac";
+		compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
 		reg = <1>;
 
 		interrupt-parent = <&gpx2>;
@@ -771,9 +834,12 @@
 		compatible = "brcm,bcm4330-bt";
 
 		shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>;
 		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+
+		interrupt-parent = <&gpx2>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wakeup";
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 1c5394152561..f1927ca15e08 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -15,6 +15,7 @@
 #include "exynos4210.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include "exynos-mfc-reserved-memory.dtsi"
 
 / {
@@ -29,6 +30,11 @@
 		       0x70000000 0x10000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_0;
+		mmc1 = &sdhci_2;
+	};
+
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
 		stdout-path = "serial2:115200n8";
@@ -46,35 +52,35 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		up {
+		key-up {
 			label = "Up";
 			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_UP>;
 			wakeup-source;
 		};
 
-		down {
+		key-down {
 			label = "Down";
 			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DOWN>;
 			wakeup-source;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 			wakeup-source;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			label = "Menu";
 			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
@@ -84,8 +90,9 @@
 
 	leds {
 		compatible = "gpio-leds";
-		status {
+		led-status {
 			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -206,74 +213,74 @@
 			ldo4_reg: LDO4 {
 				regulator-name = "VDD_RTC_1.8V";
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt	= <1800000>;
+				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 			};
 
 			ldo6_reg: LDO6 {
 				regulator-name = "VMIPI_1.8V";
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt	= <1800000>;
+				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 			};
 
 			ldo7_reg: LDO7 {
 				regulator-name = "VDD_AUD_1.8V";
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt	= <1800000>;
+				regulator-max-microvolt = <1800000>;
 			};
 
 			ldo8_reg: LDO8 {
 				regulator-name = "VADC_3.3V";
 				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt	= <3300000>;
+				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo9_reg: LDO9 {
 				regulator-name = "DVDD_SWB_2.8V";
 				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt	= <2800000>;
+				regulator-max-microvolt = <2800000>;
 				regulator-always-on;
 			};
 
 			ldo10_reg: LDO10 {
 				regulator-name = "VDD_PLL_1.1V";
 				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt	= <1100000>;
+				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
 			};
 
 			ldo11_reg: LDO11 {
 				regulator-name = "VDD_AUD_3V";
 				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt	= <3000000>;
+				regulator-max-microvolt = <3000000>;
 			};
 
 			ldo14_reg: LDO14 {
 				regulator-name = "AVDD18_SWB_1.8V";
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt	= <1800000>;
+				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 			};
 
 			ldo17_reg: LDO17 {
 				regulator-name = "VDD_SWB_3.3V";
 				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt	= <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
 
 			ldo21_reg: LDO21 {
 				regulator-name = "VDD_MIF_1.2V";
 				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt	= <1200000>;
+				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
 			};
 
 			buck1_reg: BUCK1 {
 				regulator-name = "VDD_ARM_1.2V";
 				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt	= <1350000>;
+				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
@@ -281,7 +288,7 @@
 			buck2_reg: BUCK2 {
 				regulator-name = "VDD_INT_1.1V";
 				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt	= <1100000>;
+				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
@@ -316,7 +323,7 @@
 };
 
 &pinctrl_1 {
-	max8997_irq: max8997-irq {
+	max8997_irq: max8997-irq-pins {
 		samsung,pins = "gpx0-3", "gpx0-4";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 520c5934a8d4..76f44ae0de46 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -11,10 +11,10 @@
  * tree nodes are listed in this file.
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -22,7 +22,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -30,7 +30,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -38,7 +38,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -46,7 +46,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -54,7 +54,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -62,7 +62,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -70,7 +70,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -78,7 +78,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -86,7 +86,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe2: gpe2 {
+	gpe2: gpe2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -94,7 +94,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe3: gpe3 {
+	gpe3: gpe3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -102,7 +102,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe4: gpe4 {
+	gpe4: gpe4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -110,7 +110,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -118,7 +118,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -126,7 +126,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf2: gpf2 {
+	gpf2: gpf2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -134,7 +134,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf3: gpf3 {
+	gpf3: gpf3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -142,112 +142,112 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart_audio_a: uart-audio-a {
+	uart_audio_a: uart-audio-a-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart_audio_b: uart-audio-b {
+	uart_audio_b: uart-audio-b-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpb-6", "gpb-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -255,7 +255,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -263,7 +263,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ac97_bus: ac97-bus {
+	ac97_bus: ac97-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -271,7 +271,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -279,7 +279,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -287,105 +287,105 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spdif_bus: spdif-bus {
+	spdif_bus: spdif-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpc1-3", "gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpd0-2", "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpd0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpd0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_ctrl: lcd-ctrl {
+	lcd_ctrl: lcd-ctrl-pins {
 		samsung,pins = "gpd0-0", "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_sync: lcd-sync {
+	lcd_sync: lcd-sync-pins {
 		samsung,pins = "gpf0-0", "gpf0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_en: lcd-en {
+	lcd_en: lcd-en-pins {
 		samsung,pins = "gpe3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_clk: lcd-clk {
+	lcd_clk: lcd-clk-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data16: lcd-data-width16 {
+	lcd_data16: lcd-data-width16-pins {
 		samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
 				"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
 				"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
@@ -395,7 +395,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data18: lcd-data-width18 {
+	lcd_data18: lcd-data-width18-pins {
 		samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
 				"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
 				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
@@ -406,7 +406,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data24: lcd-data-width24 {
+	lcd_data24: lcd-data-width24-pins {
 		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
 				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
 				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
@@ -420,7 +420,7 @@
 };
 
 &pinctrl_1 {
-	gpj0: gpj0 {
+	gpj0: gpj0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -428,7 +428,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj1: gpj1 {
+	gpj1: gpj1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -436,7 +436,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -444,7 +444,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk1: gpk1 {
+	gpk1: gpk1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -452,7 +452,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk2: gpk2 {
+	gpk2: gpk2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -460,7 +460,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk3: gpk3 {
+	gpk3: gpk3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -468,7 +468,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl0: gpl0 {
+	gpl0: gpl0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -476,7 +476,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl1: gpl1 {
+	gpl1: gpl1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -484,7 +484,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl2: gpl2 {
+	gpl2: gpl2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -492,42 +492,42 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpy0: gpy0 {
+	gpy0: gpy0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy1: gpy1 {
+	gpy1: gpy1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy2: gpy2 {
+	gpy2: gpy2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy3: gpy3 {
+	gpy3: gpy3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy4: gpy4 {
+	gpy4: gpy4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy5: gpy5 {
+	gpy5: gpy5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy6: gpy6 {
+	gpy6: gpy6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -544,7 +544,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -561,7 +561,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -569,7 +569,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -577,238 +577,238 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpk0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpk0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpk0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpk0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_clk: sd4-clk {
+	sd4_clk: sd4-clk-pins {
 		samsung,pins = "gpk0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_cmd: sd4-cmd {
+	sd4_cmd: sd4-cmd-pins {
 		samsung,pins = "gpk0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_cd: sd4-cd {
+	sd4_cd: sd4-cd-pins {
 		samsung,pins = "gpk0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus1: sd4-bus-width1 {
+	sd4_bus1: sd4-bus-width1-pins {
 		samsung,pins = "gpk0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus4: sd4-bus-width4 {
+	sd4_bus4: sd4-bus-width4-pins {
 		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus8: sd4-bus-width8 {
+	sd4_bus8: sd4-bus-width8-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpk1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpk1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpk1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpk1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpk2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpk2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpk2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpk2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus8: sd2-bus-width8 {
+	sd2_bus8: sd2-bus-width8-pins {
 		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_clk: sd3-clk {
+	sd3_clk: sd3-clk-pins {
 		samsung,pins = "gpk3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cmd: sd3-cmd {
+	sd3_cmd: sd3-cmd-pins {
 		samsung,pins = "gpk3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cd: sd3-cd {
+	sd3_cd: sd3-cd-pins {
 		samsung,pins = "gpk3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus1: sd3-bus-width1 {
+	sd3_bus1: sd3-bus-width1-pins {
 		samsung,pins = "gpk3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus4: sd3-bus-width4 {
+	sd3_bus4: sd3-bus-width4-pins {
 		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	eint0: ext-int0 {
+	eint0: ext-int0-pins {
 		samsung,pins = "gpx0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint8: ext-int8 {
+	eint8: ext-int8-pins {
 		samsung,pins = "gpx1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint15: ext-int15 {
+	eint15: ext-int15-pins {
 		samsung,pins = "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint16: ext-int16 {
+	eint16: ext-int16-pins {
 		samsung,pins = "gpx2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint31: ext-int31 {
+	eint31: ext-int31-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_io: cam-port-a-io {
+	cam_port_a_io: cam-port-a-io-pins {
 		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
@@ -817,21 +817,21 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_clk_active: cam-port-a-clk-active {
+	cam_port_a_clk_active: cam-port-a-clk-active-pins {
 		samsung,pins = "gpj1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_a_clk_idle: cam-port-a-clk-idle {
+	cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
 		samsung,pins = "gpj1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_cec: hdmi-cec {
+	hdmi_cec: hdmi-cec-pins {
 		samsung,pins = "gpx3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -840,12 +840,12 @@
 };
 
 &pinctrl_2 {
-	gpz: gpz {
+	gpz: gpz-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -853,7 +853,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm0_bus: pcm0-bus {
+	pcm0_bus: pcm0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index d5797a67bf48..b566f878ed84 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -25,6 +25,10 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_2;
+	};
+
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
 		stdout-path = "serial1:115200n8";
@@ -152,14 +156,14 @@
 };
 
 &pinctrl_1 {
-	keypad_rows: keypad-rows {
+	keypad_rows: keypad-rows-pins {
 		samsung,pins = "gpx2-0", "gpx2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_cols: keypad-cols {
+	keypad_cols: keypad-cols-pins {
 		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
 			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -203,7 +207,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "w25x80";
+		compatible = "winbond,w25x80", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
 
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index d2406c9146b8..ff6ee4b2c31b 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -16,6 +16,7 @@
 / {
 	model = "Samsung Trats based on Exynos4210";
 	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
+	chassis-type = "handset";
 
 	memory@40000000 {
 		device_type = "memory";
@@ -25,6 +26,12 @@
 			0x70000000 0x10000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_0;
+		mmc1 = &sdhci_2;
+		mmc2 = &sdhci_3;
+	};
+
 	chosen {
 		bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
 		stdout-path = "serial2:115200n8";
@@ -179,7 +186,7 @@
 		vdd3-supply = <&vcclcd_reg>;
 		vci-supply = <&vlcd_reg>;
 		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
-		power-on-delay= <50>;
+		power-on-delay = <50>;
 		reset-delay = <100>;
 		init-delay = <100>;
 		flip-horizontal;
@@ -463,19 +470,19 @@
 };
 
 &pinctrl_1 {
-	bt_shutdown: bt-shutdown {
+	bt_shutdown: bt-shutdown-pins {
 		samsung,pins = "gpl1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_host_wakeup: bt-host-wakeup {
+	bt_host_wakeup: bt-host-wakeup-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_device_wakeup: bt-device-wakeup {
+	bt_device_wakeup: bt-device-wakeup-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -521,7 +528,7 @@
 	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
 
 	brcmf: wifi@1 {
-		compatible = "brcm,bcm4330-fmac";
+		compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
 		reg = <1>;
 
 		interrupt-parent = <&gpx2>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index dd44ad2c6ad6..8fe0d5d2be2d 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -16,6 +16,7 @@
 / {
 	model = "Samsung Universal C210 based on Exynos4210 rev0";
 	compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
+	chassis-type = "handset";
 
 	memory@40000000 {
 		device_type = "memory";
@@ -23,6 +24,12 @@
 			0x50000000 0x10000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_0;
+		mmc1 = &sdhci_2;
+		mmc2 = &sdhci_3;
+	};
+
 	chosen {
 		bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
 		stdout-path = "serial2:115200n8";
@@ -515,7 +522,7 @@
 };
 
 &mct {
-	compatible = "none";
+	status = "disabled";
 };
 
 &mdma1 {
@@ -532,37 +539,37 @@
 };
 
 &pinctrl_1 {
-	bt_shutdown: bt-shutdown {
+	bt_shutdown: bt-shutdown-pins {
 		samsung,pins = "gpe1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_host_wakeup: bt-host-wakeup {
+	bt_host_wakeup: bt-host-wakeup-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_device_wakeup: bt-device-wakeup {
+	bt_device_wakeup: bt-device-wakeup-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	lp3974_irq: lp3974-irq {
+	lp3974_irq: lp3974-irq-pins {
 		samsung,pins = "gpx0-7", "gpx2-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	hdmi_hpd: hdmi-hpd {
+	hdmi_hpd: hdmi-hpd-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 };
 
 &pinctrl_0 {
-	i2c_ddc_bus: i2c-ddc-bus {
+	i2c_ddc_bus: i2c-ddc-bus-pins {
 		samsung,pins = "gpe4-2", "gpe4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -614,7 +621,7 @@
 	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
 
 	brcmf: wifi@1 {
-		compatible = "brcm,bcm4330-fmac";
+		compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
 		reg = <1>;
 		interrupt-parent = <&gpx2>;
 		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
@@ -658,15 +665,13 @@
 };
 
 &soc {
-	mdma0: mdma@12840000 {
+	mdma0: dma-controller@12840000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x12840000 0x1000>;
 		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock CLK_MDMA>;
 		clock-names = "apb_pclk";
 		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <1>;
 		power-domains = <&pd_lcd0>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 70baad9b11f0..0e27c3375e2e 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -28,10 +28,166 @@
 		pinctrl2 = &pinctrl_2;
 	};
 
+	bus_acp: bus-acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_ACP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_acp_opp_table>;
+		status = "disabled";
+
+		bus_acp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+		};
+	};
+
+	bus_display: bus-display {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_display_opp_table>;
+		status = "disabled";
+
+		bus_display_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+		};
+	};
+
+	bus_dmc: bus-dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+
+		bus_dmc_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <1025000>;
+			};
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+				opp-microvolt = <1050000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <1150000>;
+				opp-suspend;
+			};
+		};
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK133>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_fsys_opp_table>;
+		status = "disabled";
+
+		bus_fsys_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-10000000 {
+				opp-hz = /bits/ 64 <10000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+		};
+	};
+
+	bus_lcd0: bus-lcd0 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK200>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_leftbus: bus-leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peri: bus-peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peri_opp_table>;
+		status = "disabled";
+
+		bus_peri_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-5000000 {
+				opp-hz = /bits/ 64 <5000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+
+	bus_rightbus: bus-rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
 		cpu0: cpu@900 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
@@ -71,6 +227,22 @@
 		};
 	};
 
+	bus_leftbus_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-suspend;
+		};
+	};
+
 	soc: soc {
 		sysram: sram@2020000 {
 			compatible = "mmio-sram";
@@ -92,7 +264,7 @@
 
 		pd_lcd1: power-domain@10023ca0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
+			reg = <0x10023ca0 0x20>;
 			#power-domain-cells = <0>;
 			label = "LCD1";
 		};
@@ -184,7 +356,7 @@
 
 		sysmmu_g2d: sysmmu@12a20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12A20000 0x1000>;
+			reg = <0x12a20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 7>;
 			clock-names = "sysmmu", "master";
@@ -203,167 +375,6 @@
 			power-domains = <&pd_lcd1>;
 			#iommu-cells = <0>;
 		};
-
-		bus_dmc: bus-dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_acp: bus-acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_ACP>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_acp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peri: bus-peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK100>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peri_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK133>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_opp_table>;
-			status = "disabled";
-		};
-
-		bus_display: bus-display {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_display_opp_table>;
-			status = "disabled";
-		};
-
-		bus_lcd0: bus-lcd0 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK200>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_leftbus: bus-leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_rightbus: bus-rightbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDR>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_SCLK_MFC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_dmc_opp_table: opp-table1 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <1025000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-				opp-microvolt = <1050000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <1150000>;
-				opp-suspend;
-			};
-		};
-
-		bus_acp_opp_table: opp-table2 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_peri_opp_table: opp-table3 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-5000000 {
-				opp-hz = /bits/ 64 <5000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-
-		bus_fsys_opp_table: opp-table4 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-10000000 {
-				opp-hz = /bits/ 64 <10000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-		};
-
-		bus_display_opp_table: opp-table5 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-		};
-
-		bus_leftbus_opp_table: opp-table6 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-suspend;
-			};
-		};
 	};
 };
 
@@ -382,7 +393,6 @@
 &cpu_thermal {
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
-	thermal-sensors = <&tmu 0>;
 };
 
 &gic {
@@ -516,8 +526,6 @@
 	compatible = "samsung,exynos4210-tmu";
 	clocks = <&clock CLK_TMU_APBIF>;
 	clock-names = "tmu_apbif";
-	samsung,tmu_gain = <15>;
-	samsung,tmu_reference_voltage = <7>;
 };
 
 #include "exynos4210-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index c14e37dc3a9b..94122e9c6625 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -7,6 +7,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/leds/common.h>
 #include "exynos4412-midas.dtsi"
 
 / {
@@ -25,8 +26,9 @@
 		pinctrl-1 = <&camera_flash_host>;
 		pinctrl-2 = <&camera_flash_isp>;
 
-		flash-led {
-			label = "flash";
+		led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
 			led-max-microamp = <520833>;
 			flash-max-microamp = <1012500>;
 			flash-max-timeout-us = <1940000>;
@@ -107,7 +109,7 @@
 		vdd3-supply = <&lcd_vdd3_reg>;
 		vci-supply = <&ldo25_reg>;
 		reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
-		power-on-delay= <50>;
+		power-on-delay = <50>;
 		reset-delay = <100>;
 		init-delay = <100>;
 		flip-horizontal;
@@ -151,13 +153,13 @@
 };
 
 &pinctrl_0 {
-	camera_flash_host: camera-flash-host {
+	camera_flash_host: camera-flash-host-pins {
 		samsung,pins = "gpj1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-val = <0>;
 	};
 
-	camera_flash_isp: camera-flash-isp {
+	camera_flash_isp: camera-flash-isp-pins {
 		samsung,pins = "gpj1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-val = <1>;
diff --git a/arch/arm/boot/dts/exynos4412-i9300.dts b/arch/arm/boot/dts/exynos4412-i9300.dts
index 07fbcf845c49..61aca5798f38 100644
--- a/arch/arm/boot/dts/exynos4412-i9300.dts
+++ b/arch/arm/boot/dts/exynos4412-i9300.dts
@@ -12,6 +12,7 @@
 / {
 	model = "Samsung Galaxy S3 (GT-I9300) based on Exynos4412";
 	compatible = "samsung,i9300", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
+	chassis-type = "handset";
 
 	/* bootargs are passed in by bootloader */
 
diff --git a/arch/arm/boot/dts/exynos4412-i9305.dts b/arch/arm/boot/dts/exynos4412-i9305.dts
index 6bc3d897f432..77083f1a8273 100644
--- a/arch/arm/boot/dts/exynos4412-i9305.dts
+++ b/arch/arm/boot/dts/exynos4412-i9305.dts
@@ -5,6 +5,7 @@
 / {
 	model = "Samsung Galaxy S3 (GT-I9305) based on Exynos4412";
 	compatible = "samsung,i9305", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
+	chassis-type = "handset";
 
 	/* bootargs are passed in by bootloader */
 
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
index 47431307cb3c..ded232b04e0d 100644
--- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -11,6 +11,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pwm/pwm.h>
 #include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos4412-itop-scp-core.dtsi"
@@ -19,6 +20,10 @@
 	model = "TOPEET iTop 4412 Elite board based on Exynos4412";
 	compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4";
 
+	aliases {
+		mmc1 = &sdhci_2;
+	};
+
 	chosen {
 		bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait";
 		stdout-path = "serial2:115200n8";
@@ -28,7 +33,8 @@
 		compatible = "gpio-leds";
 
 		led2 {
-			label = "red:system";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_RED>;
 			gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 			linux,default-trigger = "heartbeat";
@@ -36,6 +42,7 @@
 
 		led3 {
 			label = "red:user";
+			color = <LED_COLOR_ID_RED>;
 			gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
@@ -44,31 +51,31 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		home {
+		key-home {
 			label = "GPIO Key Home";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpx1 1 GPIO_ACTIVE_LOW>;
 		};
 
-		back {
+		key-back {
 			label = "GPIO Key Back";
 			linux,code = <KEY_BACK>;
 			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
 		};
 
-		sleep {
+		key-sleep {
 			label = "GPIO Key Sleep";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
 		};
 
-		vol-up {
+		key-vol-up {
 			label = "GPIO Key Vol+";
 			linux,code = <KEY_UP>;
 			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 		};
 
-		vol-down {
+		key-vol-down {
 			label = "GPIO Key Vol-";
 			linux,code = <KEY_DOWN>;
 			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
@@ -179,7 +186,7 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		clocks = <&pmu_system_controller 0>;
-		clock-names = "MCLK1";
+		clock-names = "mclk";
 		wlf,shared-lrclk;
 		#sound-dai-cells = <0>;
 	};
@@ -192,7 +199,7 @@
 };
 
 &pinctrl_1 {
-	ether-reset {
+	ether-reset-pins {
 		samsung,pins = "gpc0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -211,7 +218,7 @@
 	bus-width = <4>;
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
 	pinctrl-names = "default";
-	cd-gpio = <&gpx0 7 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpx0 7 GPIO_ACTIVE_LOW>;
 	cap-sd-highspeed;
 	vmmc-supply = <&ldo23_reg>;
 	vqmmc-supply = <&ldo17_reg>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index 4583d342af39..7bc6968af9c3 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -23,9 +23,13 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	aliases {
+		mmc0 = &mshc_0;
+	};
+
 	firmware@203f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0203F000 0x1000>;
+		reg = <0x0203f000 0x1000>;
 	};
 
 	fixed-rate-clocks {
@@ -163,6 +167,7 @@
 						 <1025000>, <950000>,
 						 <918750>, <900000>,
 						 <875000>, <831250>;
+		wakeup-source;
 
 		regulators {
 			ldo1_reg: LDO1 {
@@ -475,6 +480,7 @@
 	vmmc-supply = <&buck9_reg>;
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
@@ -483,7 +489,7 @@
 };
 
 &pinctrl_1 {
-	hsic_reset: hsic-reset {
+	hsic_reset: hsic-reset-pins {
 		samsung,pins = "gpm2-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 111c32bae02c..e6b949c1a00f 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -12,11 +12,12 @@
 /dts-v1/;
 #include "exynos4412.dtsi"
 #include "exynos4412-ppmu-common.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/maxim,max77686.h>
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
 
 / {
 	compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
@@ -24,6 +25,9 @@
 	aliases {
 		i2c11 = &i2c_max77693;
 		i2c12 = &i2c_max77693_fuel;
+		mmc0 = &mshc_0;
+		mmc2 = &sdhci_2;
+		mmc3 = &sdhci_3;
 	};
 
 	chosen {
@@ -32,7 +36,7 @@
 
 	firmware@204f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
+		reg = <0x0204f000 0x1000>;
 	};
 
 	fixed-rate-clocks {
@@ -173,7 +177,7 @@
 		pmic@66 {
 			compatible = "maxim,max77693";
 			interrupt-parent = <&gpx1>;
-			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77693_irq>;
 			reg = <0x66>;
@@ -221,7 +225,7 @@
 		fuel-gauge@36 {
 			compatible = "maxim,max17047";
 			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77693_fuel_irq>;
 			reg = <0x36>;
@@ -272,9 +276,16 @@
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x39>;
 
-			port {
-				mhl_to_hdmi: endpoint {
-					remote-endpoint = <&hdmi_to_mhl>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					mhl_to_hdmi: endpoint {
+						remote-endpoint = <&hdmi_to_mhl>;
+					};
 				};
 			};
 		};
@@ -489,8 +500,7 @@
 	pinctrl-0 = <&fimc_is_uart>;
 	pinctrl-names = "default";
 	status = "okay";
-
-	};
+};
 
 &fimc_lite_0 {
 	status = "okay";
@@ -584,8 +594,7 @@
 		/* CAM_B_CLKOUT */
 		clocks = <&camera 1>;
 		clock-names = "extclk";
-		samsung,camclk-out = <1>;
-		gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
 
 		port {
 			is_s5k6a3_ep: endpoint {
@@ -645,8 +654,8 @@
 		CPVDD-supply = <&vbatt_reg>;
 		SPKVDD1-supply = <&vbatt_reg>;
 		SPKVDD2-supply = <&vbatt_reg>;
-		wlf,ldo1ena = <&gpj0 4 0>;
-		wlf,ldo2ena = <&gpj0 4 0>;
+		wlf,ldo1ena-gpios = <&gpj0 4 GPIO_ACTIVE_HIGH>;
+		wlf,ldo2ena-gpios = <&gpj0 4 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -665,9 +674,10 @@
 	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&max77686_irq>;
 		pinctrl-names = "default";
+		wakeup-source;
 		reg = <0x09>;
 		#clock-cells = <1>;
 
@@ -970,6 +980,7 @@
 	samsung,dw-mshc-ciu-div = <0>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
+	mmc-ddr-1_8v;
 	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -986,19 +997,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep0>;
 
-	mhl_int: mhl-int {
+	mhl_int: mhl-int-pins {
 		samsung,pins = "gpf3-5";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	i2c_mhl_bus: i2c-mhl-bus {
+	i2c_mhl_bus: i2c-mhl-bus-pins {
 		samsung,pins = "gpf0-4", "gpf0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	sleep0: sleep-states {
+	sleep0: sleep-state {
 		PIN_SLP(gpa0-0, INPUT, NONE);
 		PIN_SLP(gpa0-1, OUT0, NONE);
 		PIN_SLP(gpa0-2, INPUT, NONE);
@@ -1101,52 +1112,52 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep1>;
 
-	gpio_keys: gpio-keys {
+	gpio_keys: gpio-keys-pins {
 		samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_shutdown: bt-shutdown {
+	bt_shutdown: bt-shutdown-pins {
 		samsung,pins = "gpl0-6";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_host_wakeup: bt-host-wakeup {
+	bt_host_wakeup: bt-host-wakeup-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_device_wakeup: bt-device-wakeup {
+	bt_device_wakeup: bt-device-wakeup-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max77693_irq: max77693-irq {
+	max77693_irq: max77693-irq-pins {
 		samsung,pins = "gpx1-5";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max77693_fuel_irq: max77693-fuel-irq {
+	max77693_fuel_irq: max77693-fuel-irq-pins {
 		samsung,pins = "gpx2-3";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	sdhci2_cd: sdhci2-cd-irq {
+	sdhci2_cd: sdhci2-cd-irq-pins {
 		samsung,pins = "gpx3-4";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	hdmi_hpd: hdmi-hpd {
+	hdmi_hpd: hdmi-hpd-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
-	sleep1: sleep-states {
+	sleep1: sleep-state {
 		PIN_SLP(gpk0-0, PREV, NONE);
 		PIN_SLP(gpk0-1, PREV, NONE);
 		PIN_SLP(gpk0-2, OUT0, NONE);
@@ -1299,7 +1310,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep2>;
 
-	sleep2: sleep-states {
+	sleep2: sleep-state {
 		PIN_SLP(gpz-0, INPUT, DOWN);
 		PIN_SLP(gpz-1, INPUT, DOWN);
 		PIN_SLP(gpz-2, INPUT, DOWN);
@@ -1314,7 +1325,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep3>;
 
-	sleep3: sleep-states {
+	sleep3: sleep-state {
 		PIN_SLP(gpv0-0, INPUT, DOWN);
 		PIN_SLP(gpv0-1, INPUT, DOWN);
 		PIN_SLP(gpv0-2, INPUT, DOWN);
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
index c49dbb7847b8..9ae05b0d684c 100644
--- a/arch/arm/boot/dts/exynos4412-n710x.dts
+++ b/arch/arm/boot/dts/exynos4412-n710x.dts
@@ -5,6 +5,7 @@
 / {
 	compatible = "samsung,n710x", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
 	model = "Samsung Galaxy Note 2 (GT-N7100, GT-N7105) based on Exynos4412";
+	chassis-type = "handset";
 
 	memory@40000000 {
 		device_type = "memory";
@@ -50,8 +51,8 @@
 		reg = <0x48>;
 		interrupt-parent = <&gpm2>;
 		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		x-size = <720>;
-		y-size = <1280>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
 		avdd-supply = <&ldo23_reg>;
 		vdd-supply = <&ldo24_reg>;
 	};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 2b20d9095d9f..45ef7b7ba7e0 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -2,7 +2,7 @@
 /*
  * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
  * device tree source
-*/
+ */
 
 #include <dt-bindings/sound/samsung-i2s.h>
 #include <dt-bindings/input/input.h>
@@ -13,13 +13,18 @@
 #include "exynos-mfc-reserved-memory.dtsi"
 
 / {
+	aliases {
+		mmc0 = &mshc_0;
+		mmc2 = &sdhci_2;
+	};
+
 	chosen {
 		stdout-path = &serial_1;
 	};
 
 	firmware@204f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
+		reg = <0x0204f000 0x1000>;
 	};
 
 	gpio_keys: gpio-keys {
@@ -122,6 +127,7 @@
 };
 
 &clock {
+	clocks = <&clock CLK_XUSBXTI>;
 	assigned-clocks = <&clock CLK_FOUT_EPLL>;
 	assigned-clock-rates = <45158401>;
 };
@@ -171,24 +177,24 @@
 };
 
 &pinctrl_1 {
-	gpio_power_key: power-key {
+	gpio_power_key: power-key-pins {
 		samsung,pins = "gpx1-3";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd: hdmi-hpd {
+	hdmi_hpd: hdmi-hpd-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
-	emmc_rstn: emmc-rstn {
+	emmc_rstn: emmc-rstn-pins {
 		samsung,pins = "gpk1-2";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
@@ -278,9 +284,10 @@
 	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
+		wakeup-source;
 		reg = <0x09>;
 		#clock-cells = <1>;
 
@@ -531,6 +538,7 @@
 
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index efaf7533e84f..42812da1f882 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -9,6 +9,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/leds/common.h>
 #include "exynos4412-odroid-common.dtsi"
 #include "exynos4412-prime.dtsi"
 
@@ -22,7 +23,7 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x7FF00000>;
+		reg = <0x40000000 0x7ff00000>;
 	};
 
 	vbus_otg_reg: regulator-1 {
@@ -37,7 +38,8 @@
 	leds {
 		compatible = "gpio-leds";
 		led1 {
-			label = "led1:heart";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
@@ -119,8 +121,8 @@
 	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
 	phy-names = "hsic0", "hsic1";
 
-	ethernet: usbether@2 {
-		compatible = "usb0424,9730";
+	ethernet: ethernet@2 {
+		compatible = "usb424,9730";
 		reg = <2>;
 		local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
 	};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 0e9d626e740a..d5316cf2fbb6 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -9,6 +9,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/leds/common.h>
 #include "exynos4412-odroid-common.dtsi"
 
 / {
@@ -21,19 +22,21 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x3FF00000>;
+		reg = <0x40000000 0x3ff00000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 		led1 {
-			label = "led1:heart";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 		led2 {
 			label = "led2:mmc0";
+			function = LED_FUNCTION_DISK_ACTIVITY;
 			gpios = <&gpc1 2 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "mmc0";
@@ -70,21 +73,22 @@
 	phy-names = "hsic0";
 
 	hub@2 {
-		compatible = "usb0424,3503";
+		compatible = "usb424,3503";
 		reg = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		hub@1 {
-			compatible = "usb0424,9514";
+			compatible = "usb424,9514";
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			ethernet: usbether@1 {
-				compatible = "usb0424,ec00";
+			ethernet: ethernet@1 {
+				compatible = "usb424,ec00";
 				reg = <1>;
-				local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
+				/* Filled in by a bootloader */
+				local-mac-address = [00 00 00 00 00 00];
 			};
 		};
 	};
@@ -111,7 +115,7 @@
 };
 
 &pinctrl_1 {
-	gpio_home_key: home-key {
+	gpio_home_key: home-key-pins {
 		samsung,pins = "gpx2-2";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts
index f4b68c75c962..7be4cbdc4413 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx2.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts
@@ -17,6 +17,6 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x7FF00000>;
+		reg = <0x40000000 0x7ff00000>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index e1f6de53e20e..23b151645d66 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -25,13 +25,18 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	aliases {
+		mmc0 = &mshc_0;
+		mmc1 = &sdhci_2;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
 
 	firmware@203f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0203F000 0x1000>;
+		reg = <0x0203f000 0x1000>;
 	};
 
 	mmc_reg: regulator-0 {
@@ -95,7 +100,7 @@
 };
 
 &ehci {
-	samsung,vbus-gpio = <&gpx3 5 1>;
+	samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
 	phy-names = "hsic0", "hsic1";
@@ -144,6 +149,7 @@
 						 <1200000>, <1200000>,
 						 <1200000>, <1200000>,
 						 <1200000>, <1200000>;
+		wakeup-source;
 
 		s5m8767_osc: clocks {
 			compatible = "samsung,s5m8767-clk";
@@ -381,7 +387,7 @@
 			buck1_reg: BUCK1 {
 				regulator-name = "VDD_MIF";
 				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt	= <1100000>;
+				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
 				regulator-boot-on;
 				op_mode = <1>; /* Normal Mode */
@@ -390,7 +396,7 @@
 			buck2_reg: BUCK2 {
 				regulator-name = "VDD_ARM";
 				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt	= <1350000>;
+				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
 				regulator-boot-on;
 				op_mode = <1>; /* Normal Mode */
@@ -399,7 +405,7 @@
 			buck3_reg: BUCK3 {
 				regulator-name = "VDD_INT";
 				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt	= <1200000>;
+				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
 				regulator-boot-on;
 				op_mode = <1>; /* Normal Mode */
@@ -408,7 +414,7 @@
 			buck4_reg: BUCK4 {
 				regulator-name = "VDD_G3D";
 				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt	= <1500000>;
+				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 				regulator-boot-on;
 				op_mode = <1>; /* Normal Mode */
@@ -417,7 +423,7 @@
 			buck5_reg: BUCK5 {
 				regulator-name = "VDD_M12";
 				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt	= <1500000>;
+				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 				regulator-boot-on;
 				op_mode = <1>; /* Normal Mode */
@@ -426,7 +432,7 @@
 			buck6_reg: BUCK6 {
 				regulator-name = "VDD12_5M";
 				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt	= <1500000>;
+				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 				regulator-boot-on;
 				op_mode = <1>; /* Normal Mode */
@@ -435,7 +441,7 @@
 			buck9_reg: BUCK9 {
 				regulator-name = "VDDF28_EMMC";
 				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt	= <3000000>;
+				regulator-max-microvolt = <3000000>;
 				regulator-always-on;
 				regulator-boot-on;
 				op_mode = <1>; /* Normal Mode */
@@ -497,6 +503,7 @@
 
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
@@ -505,14 +512,14 @@
 };
 
 &pinctrl_1 {
-	keypad_rows: keypad-rows {
+	keypad_rows: keypad-rows-pins {
 		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_cols: keypad-cols {
+	keypad_cols: keypad-cols-pins {
 		samsung,pins = "gpx1-0", "gpx1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4412-p4note-n8010.dts b/arch/arm/boot/dts/exynos4412-p4note-n8010.dts
index 9f559425bd2c..0932ec5866cc 100644
--- a/arch/arm/boot/dts/exynos4412-p4note-n8010.dts
+++ b/arch/arm/boot/dts/exynos4412-p4note-n8010.dts
@@ -12,6 +12,7 @@
 / {
 	model = "Samsung Galaxy Note 10.1 (GT-N8010/N8013) based on Exynos4412";
 	compatible = "samsung,n8010", "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
+	chassis-type = "tablet";
 
 	/* this is the base variant without any kind of modem */
 };
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
index b2f9d5448a18..0b89d5682f85 100644
--- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -15,7 +15,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/samsung.h>
+#include <dt-bindings/power/summit,smb347-charger.h>
+#include "exynos-pinctrl.h"
 
 / {
 	compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
@@ -25,13 +26,19 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mshc_0;
+		mmc2 = &sdhci_2;
+		mmc3 = &sdhci_3;
+	};
+
 	chosen {
 		stdout-path = &serial_2;
 	};
 
 	firmware@204f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
+		reg = <0x0204f000 0x1000>;
 	};
 
 	fixed-rate-clocks {
@@ -105,6 +112,16 @@
 		regulator-always-on;
 	};
 
+	panel_vdd: voltage-regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_ENABLE";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable>;
+		gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
 	wlan_pwrseq: sdhci3-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
@@ -114,6 +131,15 @@
 		clock-names = "ext_clock";
 	};
 
+	battery_cell: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion";
+		constant-charge-current-max-microamp = <2200000>;
+		precharge-current-microamp = <250000>;
+		charge-term-current-microamp = <250000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+	};
+
 	i2c-gpio-1 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -146,7 +172,7 @@
 			pinctrl-0 = <&fuel_alert_irq>;
 			pinctrl-names = "default";
 			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 			maxim,rsns-microohm = <10000>;
 			maxim,over-heat-temp = <600>;
 			maxim,over-volt = <4300>;
@@ -168,20 +194,67 @@
 			pinctrl-names = "default";
 			interrupt-parent = <&gpx0>;
 			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-controller;
-			irq-trigger = <0x1>;
 			st,adc-freq = <3>;
 			st,mod-12b = <1>;
 			st,ref-sel = <0>;
 			st,sample-time = <3>;
 
-			stmpe_adc {
+			adc {
 				compatible = "st,stmpe-adc";
 				#io-channel-cells = <1>;
-				st,norequest-mask = <0x2F>;
+				st,norequest-mask = <0x2f>;
+			};
+		};
+	};
+
+	i2c-gpio-4 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power_supply: charger@6 {
+			compatible = "summit,smb347";
+			reg = <0x6>;
+			summit,enable-usb-charging;
+			summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
+			summit,fast-voltage-threshold-microvolt = <2600000>;
+			summit,chip-temperature-threshold-celsius = <130>;
+			summit,usb-current-limit-microamp = <1800000>;
+
+			monitored-battery = <&battery_cell>;
+		};
+	};
+
+	panel {
+		compatible = "samsung,ltl101al01";
+		pinctrl-0 = <&lvds_nshdn>;
+		pinctrl-names = "default";
+		power-supply = <&panel_vdd>;
+		enable-gpios = <&gpm0 5 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
+
+		port {
+			lcd_ep: endpoint {
+				remote-endpoint = <&fimd_ep>;
 			};
 		};
 	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&led_bl_reset>;
+		pinctrl-names = "default";
+		enable-gpios = <&gpm0 1 GPIO_ACTIVE_HIGH>;
+		power-supply = <&panel_vdd>;
+		pwms = <&pwm 1 78770 0>;
+		brightness-levels = <0 48 128 255>;
+		num-interpolated-steps = <8>;
+		default-brightness-level = <12>;
+	};
 };
 
 &adc {
@@ -261,22 +334,19 @@
 };
 
 &fimd {
-	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+	pinctrl-0 = <&lcd_clk &lcd_data24>;
 	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
-	display-timings {
-		timing0 {
-			clock-frequency = <66666666>;
-			hactive = <1280>;
-			vactive = <800>;
-			hfront-porch = <18>;
-			hback-porch = <36>;
-			hsync-len = <16>;
-			vback-porch = <16>;
-			vfront-porch = <4>;
-			vsync-len = <3>;
-			hsync-active = <1>;
+	samsung,invert-vclk;
+
+	port@3 {
+		reg = <3>;
+
+		fimd_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
 		};
 	};
 };
@@ -322,9 +392,10 @@
 	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&max77686_irq>;
 		pinctrl-names = "default";
+		wakeup-source;
 		reg = <0x09>;
 		#clock-cells = <1>;
 
@@ -628,6 +699,7 @@
 	samsung,dw-mshc-ciu-div = <0>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
+	mmc-ddr-1_8v;
 	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 	pinctrl-names = "default";
 	bus-width = <4>;
@@ -640,19 +712,25 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep0>;
 
-	tsp_reg_gpio_2: tsp-reg-gpio-2 {
+	tsp_reg_gpio_2: tsp-reg-gpio-2-pins {
 		samsung,pins = "gpb-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	tsp_reg_gpio_3: tsp-reg-gpio-3 {
+	tsp_reg_gpio_3: tsp-reg-gpio-3-pins {
 		samsung,pins = "gpb-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	sleep0: sleep-states {
+	lcd_enable: lcd-enable-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	sleep0: sleep-state {
 		PIN_SLP(gpa0-0, INPUT, NONE);
 		PIN_SLP(gpa0-1, OUT0, NONE);
 		PIN_SLP(gpa0-2, INPUT, NONE);
@@ -754,19 +832,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep1>;
 
-	sd3_wifi: sd3-wifi {
+	sd3_wifi: sd3-wifi-pins {
 		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_shutdown: bt-shutdown {
+	bt_shutdown: bt-shutdown-pins {
 		samsung,pins = "gpl0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	uart_sel: uart-sel {
+	uart_sel: uart-sel-pins {
 		samsung,pins = "gpl2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -774,82 +852,94 @@
 		/* 0 = CP, 1 = AP (serial output) */
 	};
 
-	tsp_rst: tsp-rst {
+	led_bl_reset: led-bl-reset-pins {
+		samsung,pins = "gpm0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	tsp_rst: tsp-rst-pins {
 		samsung,pins = "gpm0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	tsp_irq: tsp-irq {
+	lvds_nshdn: lvds-nshdn-pins {
+		samsung,pins = "gpm0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	tsp_irq: tsp-irq-pins {
 		samsung,pins = "gpm2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	wifi_reset: wifi-reset {
+	wifi_reset: wifi-reset-pins {
 		samsung,pins = "gpm3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	tsp_reg_gpio_1: tsp-reg-gpio-1 {
+	tsp_reg_gpio_1: tsp-reg-gpio-1-pins {
 		samsung,pins = "gpm4-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	ak8975_irq: ak8975-irq {
+	ak8975_irq: ak8975-irq-pins {
 		samsung,pins = "gpm4-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
-	stmpe_adc_irq: stmpe-adc-irq {
+	stmpe_adc_irq: stmpe-adc-irq-pins {
 		samsung,pins = "gpx0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	gpio_keys: gpio-keys {
+	gpio_keys: gpio-keys-pins {
 		samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	fuel_alert_irq: fuel-alert-irq {
+	fuel_alert_irq: fuel-alert-irq-pins {
 		samsung,pins = "gpx2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	wifi_host_wake: wifi-host-wake {
+	wifi_host_wake: wifi-host-wake-pins {
 		samsung,pins = "gpx2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
-	bt_host_wakeup: bt-host-wakeup {
+	bt_host_wakeup: bt-host-wakeup-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_device_wakeup: bt-device-wakeup {
+	bt_device_wakeup: bt-device-wakeup-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	sdhci2_cd: sdhci2-cd {
+	sdhci2_cd: sdhci2-cd-pins {
 		samsung,pins = "gpx3-4";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	sleep1: sleep-states {
+	sleep1: sleep-state {
 		PIN_SLP(gpk0-0, PREV, NONE);
 		PIN_SLP(gpk0-1, PREV, NONE);
 		PIN_SLP(gpk0-2, PREV, NONE);
@@ -1003,7 +1093,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep2>;
 
-	sleep2: sleep-states {
+	sleep2: sleep-state {
 		PIN_SLP(gpz-0, INPUT, DOWN);
 		PIN_SLP(gpz-1, INPUT, DOWN);
 		PIN_SLP(gpz-2, INPUT, DOWN);
@@ -1018,7 +1108,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep3>;
 
-	sleep3: sleep-states {
+	sleep3: sleep-state {
 		PIN_SLP(gpv0-0, INPUT, DOWN);
 		PIN_SLP(gpv0-1, INPUT, DOWN);
 		PIN_SLP(gpv0-2, INPUT, DOWN);
@@ -1065,6 +1155,13 @@
 	assigned-clock-parents = <&clock CLK_XUSBXTI>;
 };
 
+&pwm {
+	pinctrl-0 = <&pwm1_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <1>;
+	status = "okay";
+};
+
 &rtc {
 	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
 	clock-names = "rtc", "rtc_src";
diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
index d7d5fdc230d8..8ab31c3daa48 100644
--- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
@@ -9,17 +9,17 @@
  * tree nodes are listed in this file.
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
 
 #define PIN_SLP(_pin, _mode, _pull)					\
-	_pin {								\
+	pin- ## _pin {							\
 		samsung,pins = #_pin;					\
 		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
 		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
 	}
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -27,7 +27,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -35,7 +35,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -43,7 +43,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -51,7 +51,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -59,7 +59,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -67,7 +67,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -75,7 +75,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -83,7 +83,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -91,7 +91,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf2: gpf2 {
+	gpf2: gpf2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -99,7 +99,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf3: gpf3 {
+	gpf3: gpf3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -107,7 +107,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj0: gpj0 {
+	gpj0: gpj0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -115,7 +115,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj1: gpj1 {
+	gpj1: gpj1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -123,112 +123,112 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart_audio_a: uart-audio-a {
+	uart_audio_a: uart-audio-a-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart_audio_b: uart-audio-b {
+	uart_audio_b: uart-audio-b-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpb-0", "gpb-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -236,7 +236,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -244,7 +244,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ac97_bus: ac97-bus {
+	ac97_bus: ac97-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -252,7 +252,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -260,7 +260,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -268,105 +268,105 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spdif_bus: spdif-bus {
+	spdif_bus: spdif-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpc1-3", "gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpd0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_ctrl: lcd-ctrl {
+	lcd_ctrl: lcd-ctrl-pins {
 		samsung,pins = "gpd0-0", "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpd0-2", "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpd0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	mipi0_clk: mipi0-clk {
+	mipi0_clk: mipi0-clk-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	mipi1_clk: mipi1-clk {
+	mipi1_clk: mipi1-clk-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_clk: lcd-clk {
+	lcd_clk: lcd-clk-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data16: lcd-data-width16 {
+	lcd_data16: lcd-data-width16-pins {
 		samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
 				"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
 				"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
@@ -376,7 +376,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data18: lcd-data-width18 {
+	lcd_data18: lcd-data-width18-pins {
 		samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
 				"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
 				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
@@ -387,7 +387,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data24: lcd-data-width24 {
+	lcd_data24: lcd-data-width24-pins {
 		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
 				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
 				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
@@ -399,14 +399,14 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_ldi: lcd-ldi {
+	lcd_ldi: lcd-ldi-pins {
 		samsung,pins = "gpf3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_io: cam-port-a-io {
+	cam_port_a_io: cam-port-a-io-pins {
 		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
@@ -415,14 +415,14 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_clk_active: cam-port-a-clk-active {
+	cam_port_a_clk_active: cam-port-a-clk-active-pins {
 		samsung,pins = "gpj1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_a_clk_idle: cam-port-a-clk-idle {
+	cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
 		samsung,pins = "gpj1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -431,7 +431,7 @@
 };
 
 &pinctrl_1 {
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -439,7 +439,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk1: gpk1 {
+	gpk1: gpk1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -447,7 +447,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk2: gpk2 {
+	gpk2: gpk2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -455,7 +455,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk3: gpk3 {
+	gpk3: gpk3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -463,7 +463,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl0: gpl0 {
+	gpl0: gpl0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -471,7 +471,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl1: gpl1 {
+	gpl1: gpl1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -479,7 +479,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl2: gpl2 {
+	gpl2: gpl2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -487,7 +487,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm0: gpm0 {
+	gpm0: gpm0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -495,7 +495,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm1: gpm1 {
+	gpm1: gpm1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -503,7 +503,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm2: gpm2 {
+	gpm2: gpm2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -511,7 +511,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm3: gpm3 {
+	gpm3: gpm3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -519,7 +519,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm4: gpm4 {
+	gpm4: gpm4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -527,42 +527,42 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpy0: gpy0 {
+	gpy0: gpy0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy1: gpy1 {
+	gpy1: gpy1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy2: gpy2 {
+	gpy2: gpy2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy3: gpy3 {
+	gpy3: gpy3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy4: gpy4 {
+	gpy4: gpy4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy5: gpy5 {
+	gpy5: gpy5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy6: gpy6 {
+	gpy6: gpy6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -579,7 +579,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -596,7 +596,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -604,7 +604,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -612,203 +612,203 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpk0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpk0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpk0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpk0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_clk: sd4-clk {
+	sd4_clk: sd4-clk-pins {
 		samsung,pins = "gpk0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_cmd: sd4-cmd {
+	sd4_cmd: sd4-cmd-pins {
 		samsung,pins = "gpk0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_cd: sd4-cd {
+	sd4_cd: sd4-cd-pins {
 		samsung,pins = "gpk0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus1: sd4-bus-width1 {
+	sd4_bus1: sd4-bus-width1-pins {
 		samsung,pins = "gpk0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus4: sd4-bus-width4 {
+	sd4_bus4: sd4-bus-width4-pins {
 		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus8: sd4-bus-width8 {
+	sd4_bus8: sd4-bus-width8-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpk1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpk1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpk1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpk1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpk2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpk2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpk2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpk2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus8: sd2-bus-width8 {
+	sd2_bus8: sd2-bus-width8-pins {
 		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_clk: sd3-clk {
+	sd3_clk: sd3-clk-pins {
 		samsung,pins = "gpk3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cmd: sd3-cmd {
+	sd3_cmd: sd3-cmd-pins {
 		samsung,pins = "gpk3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cd: sd3-cd {
+	sd3_cd: sd3-cd-pins {
 		samsung,pins = "gpk3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus1: sd3-bus-width1 {
+	sd3_bus1: sd3-bus-width1-pins {
 		samsung,pins = "gpk3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus4: sd3-bus-width4 {
+	sd3_bus4: sd3-bus-width4-pins {
 		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_io: cam-port-b-io {
+	cam_port_b_io: cam-port-b-io-pins {
 		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
 				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
@@ -817,77 +817,77 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_b_clk_active: cam-port-b-clk-active {
+	cam_port_b_clk_active: cam-port-b-clk-active-pins {
 		samsung,pins = "gpm2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
+	cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
 		samsung,pins = "gpm2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint0: ext-int0 {
+	eint0: ext-int0-pins {
 		samsung,pins = "gpx0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint8: ext-int8 {
+	eint8: ext-int8-pins {
 		samsung,pins = "gpx1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint15: ext-int15 {
+	eint15: ext-int15-pins {
 		samsung,pins = "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint16: ext-int16 {
+	eint16: ext-int16-pins {
 		samsung,pins = "gpx2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint31: ext-int31 {
+	eint31: ext-int31-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_i2c0: fimc-is-i2c0 {
+	fimc_is_i2c0: fimc-is-i2c0-pins {
 		samsung,pins = "gpm4-0", "gpm4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_i2c1: fimc-is-i2c1 {
+	fimc_is_i2c1: fimc-is-i2c1-pins {
 		samsung,pins = "gpm4-2", "gpm4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_uart: fimc-is-uart {
+	fimc_is_uart: fimc-is-uart-pins {
 		samsung,pins = "gpm3-5", "gpm3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_cec: hdmi-cec {
+	hdmi_cec: hdmi-cec-pins {
 		samsung,pins = "gpx3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -896,7 +896,7 @@
 };
 
 &pinctrl_2 {
-	gpz: gpz {
+	gpz: gpz-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -904,7 +904,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -912,7 +912,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm0_bus: pcm0-bus {
+	pcm0_bus: pcm0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -922,7 +922,7 @@
 };
 
 &pinctrl_3 {
-	gpv0: gpv0 {
+	gpv0: gpv0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -930,7 +930,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv1: gpv1 {
+	gpv1: gpv1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -938,7 +938,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv2: gpv2 {
+	gpv2: gpv2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -946,7 +946,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv3: gpv3 {
+	gpv3: gpv3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -954,7 +954,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv4: gpv4 {
+	gpv4: gpv4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -962,7 +962,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	c2c_bus: c2c-bus {
+	c2c_bus: c2c-bus-pins {
 		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
 				"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
 				"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
diff --git a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi b/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
index 3a3b2fafefdd..7f187a3dedcc 100644
--- a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
@@ -7,41 +7,41 @@
  */
 
 &ppmu_dmc0 {
-       status = "okay";
+	status = "okay";
 
-       events {
-	       ppmu_dmc0_3: ppmu-event3-dmc0 {
-		       event-name = "ppmu-event3-dmc0";
-	       };
-       };
+	events {
+		ppmu_dmc0_3: ppmu-event3-dmc0 {
+			event-name = "ppmu-event3-dmc0";
+		};
+	};
 };
 
 &ppmu_dmc1 {
-       status = "okay";
+	status = "okay";
 
-       events {
-	       ppmu_dmc1_3: ppmu-event3-dmc1 {
-		       event-name = "ppmu-event3-dmc1";
-	       };
-       };
+	events {
+		ppmu_dmc1_3: ppmu-event3-dmc1 {
+			event-name = "ppmu-event3-dmc1";
+		};
+	};
 };
 
 &ppmu_leftbus {
-       status = "okay";
+	status = "okay";
 
-       events {
-	       ppmu_leftbus_3: ppmu-event3-leftbus {
-		       event-name = "ppmu-event3-leftbus";
-	       };
-       };
+	events {
+		ppmu_leftbus_3: ppmu-event3-leftbus {
+			event-name = "ppmu-event3-leftbus";
+		};
+	};
 };
 
 &ppmu_rightbus {
-       status = "okay";
+	status = "okay";
 
-       events {
-	       ppmu_rightbus_3: ppmu-event3-rightbus {
-		       event-name = "ppmu-event3-rightbus";
-	       };
-       };
+	events {
+		ppmu_rightbus_3: ppmu-event3-rightbus {
+			event-name = "ppmu-event3-rightbus";
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index cc99b955af0c..715dfcba1417 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -22,6 +22,10 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_2;
+	};
+
 	chosen {
 		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
 		stdout-path = "serial1:115200n8";
@@ -133,14 +137,14 @@
 };
 
 &pinctrl_1 {
-	keypad_rows: keypad-rows {
+	keypad_rows: keypad-rows-pins {
 		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_cols: keypad-cols {
+	keypad_cols: keypad-cols-pins {
 		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
 			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
index 017b26108bb0..5a2dcdc5c28b 100644
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -11,11 +11,16 @@
 /dts-v1/;
 #include "exynos4412.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "FriendlyARM TINY4412 board based on Exynos4412";
 	compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4";
 
+	aliases {
+		mmc0 = &sdhci_2;
+	};
+
 	chosen {
 		stdout-path = &serial_0;
 	};
@@ -30,6 +35,7 @@
 
 		led1 {
 			label = "led1";
+			function = LED_FUNCTION_HEARTBEAT;
 			gpios = <&gpm4 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "heartbeat";
@@ -49,6 +55,7 @@
 
 		led4 {
 			label = "led4";
+			function = LED_FUNCTION_DISK_ACTIVITY;
 			gpios = <&gpm4 3 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "mmc0";
@@ -76,6 +83,7 @@
 
 	panel {
 		compatible = "innolux,at070tn92";
+		power-supply = <&vddq_lcd>;
 
 		port {
 			panel_input: endpoint {
@@ -83,6 +91,13 @@
 			};
 		};
 	};
+
+	vddq_lcd: regulator-vddq-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "vddq-lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
 };
 
 &cpu_thermal {
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 7b447b63007e..3c2d2a7836da 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -15,6 +15,7 @@
 / {
 	model = "Samsung Trats 2 based on Exynos4412";
 	compatible = "samsung,trats2", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
+	chassis-type = "handset";
 
 	memory@40000000 {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index a142fe84010b..82a36fb5ee8b 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -28,17 +28,161 @@
 		pinctrl3 = &pinctrl_3;
 		fimc-lite0 = &fimc_lite_0;
 		fimc-lite1 = &fimc_lite_1;
-		mshc0 = &mshc_0;
+	};
+
+	bus_acp: bus-acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_ACP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_acp_opp_table>;
+		status = "disabled";
+
+		bus_acp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+			};
+		};
+	};
+
+	bus_c2c: bus-c2c {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_C2C>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_dmc: bus-dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		samsung,data-clock-ratio = <4>;
+		#interconnect-cells = <0>;
+		status = "disabled";
+	};
+
+	bus_display: bus-display {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_display_opp_table>;
+		interconnects = <&bus_leftbus &bus_dmc>;
+		#interconnect-cells = <0>;
+		status = "disabled";
+
+		bus_display_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+		};
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK133>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_fsys_opp_table>;
+		status = "disabled";
+
+		bus_fsys_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+		};
+	};
+
+	bus_leftbus: bus-leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		interconnects = <&bus_dmc>;
+		#interconnect-cells = <0>;
+		status = "disabled";
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peri: bus-peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peri_opp_table>;
+		status = "disabled";
+
+		bus_peri_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+
+	bus_rightbus: bus-rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
 	};
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
 		cpu0: cpu@a00 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-			reg = <0xA00>;
+			reg = <0xa00>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -48,7 +192,7 @@
 		cpu1: cpu@a01 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-			reg = <0xA01>;
+			reg = <0xa01>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -58,7 +202,7 @@
 		cpu2: cpu@a02 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-			reg = <0xA02>;
+			reg = <0xa02>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -68,7 +212,7 @@
 		cpu3: cpu@a03 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-			reg = <0xA03>;
+			reg = <0xa03>;
 			clocks = <&clock CLK_ARM_CLK>;
 			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
@@ -76,7 +220,7 @@
 		};
 	};
 
-	cpu0_opp_table: opp-table0 {
+	cpu0_opp_table: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -154,6 +298,53 @@
 		};
 	};
 
+	bus_dmc_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1050000>;
+			opp-suspend;
+		};
+	};
+
+	bus_leftbus_opp_table: opp-table-2 {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <925000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1000000>;
+			opp-suspend;
+		};
+	};
 
 	soc: soc {
 
@@ -184,7 +375,7 @@
 
 		pinctrl_3: pinctrl@106e0000 {
 			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x106E0000 0x1000>;
+			reg = <0x106e0000 0x1000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -208,7 +399,7 @@
 
 		pd_isp: power-domain@10023ca0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
+			reg = <0x10023ca0 0x20>;
 			#power-domain-cells = <0>;
 			label = "ISP";
 		};
@@ -268,7 +459,7 @@
 
 		adc: adc@126c0000 {
 			compatible = "samsung,exynos4212-adc";
-			reg = <0x126C0000 0x100>;
+			reg = <0x126c0000 0x100>;
 			interrupt-parent = <&combiner>;
 			interrupts = <10 3>;
 			clocks = <&clock CLK_TSADC>;
@@ -301,7 +492,7 @@
 
 		sysmmu_g2d: sysmmu@10a40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A40000 0x1000>;
+			reg = <0x10a40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 7>;
 			clock-names = "sysmmu", "master";
@@ -333,7 +524,7 @@
 
 		sysmmu_fimc_fd: sysmmu@122a0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x122A0000 0x1000>;
+			reg = <0x122a0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <16 4>;
 			power-domains = <&pd_isp>;
@@ -344,7 +535,7 @@
 
 		sysmmu_fimc_mcuctl: sysmmu@122b0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x122B0000 0x1000>;
+			reg = <0x122b0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <16 5>;
 			power-domains = <&pd_isp>;
@@ -355,7 +546,7 @@
 
 		sysmmu_fimc_lite0: sysmmu@123b0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x123B0000 0x1000>;
+			reg = <0x123b0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <16 0>;
 			power-domains = <&pd_isp>;
@@ -367,7 +558,7 @@
 
 		sysmmu_fimc_lite1: sysmmu@123c0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x123C0000 0x1000>;
+			reg = <0x123c0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <16 1>;
 			power-domains = <&pd_isp>;
@@ -376,182 +567,6 @@
 				 <&isp_clock CLK_ISP_FIMC_LITE1>;
 			#iommu-cells = <0>;
 		};
-
-		bus_dmc: bus-dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			samsung,data-clock-ratio = <4>;
-			#interconnect-cells = <0>;
-			status = "disabled";
-		};
-
-		bus_acp: bus-acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_ACP>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_acp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_c2c: bus-c2c {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_C2C>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_dmc_opp_table: opp-table1 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-				opp-microvolt = <950000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <1050000>;
-				opp-suspend;
-			};
-		};
-
-		bus_acp_opp_table: opp-table2 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-			};
-		};
-
-		bus_leftbus: bus-leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			interconnects = <&bus_dmc>;
-			#interconnect-cells = <0>;
-			status = "disabled";
-		};
-
-		bus_rightbus: bus-rightbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDR>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_display: bus-display {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_display_opp_table>;
-			interconnects = <&bus_leftbus &bus_dmc>;
-			#interconnect-cells = <0>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK133>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peri: bus-peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK100>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peri_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_SCLK_MFC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_leftbus_opp_table: opp-table3 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <925000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-				opp-microvolt = <950000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <1000000>;
-				opp-suspend;
-			};
-		};
-
-		bus_display_opp_table: opp-table4 {
-			compatible = "operating-points-v2";
-
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_fsys_opp_table: opp-table5 {
-			compatible = "operating-points-v2";
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-		};
-
-		bus_peri_opp_table: opp-table6 {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
 	};
 };
 
@@ -598,7 +613,7 @@
 
 	fimc_lite_1: fimc-lite@123a0000 {
 		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x123A0000 0x1000>;
+		reg = <0x123a0000 0x1000>;
 		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		power-domains = <&pd_isp>;
 		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
@@ -782,7 +797,7 @@
 };
 
 &pmu_system_controller {
-	compatible = "samsung,exynos4412-pmu", "syscon";
+	compatible = "samsung,exynos4412-pmu", "simple-mfd", "syscon";
 	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
 			"clkout4", "clkout8", "clkout9";
 	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
@@ -795,8 +810,8 @@
 	compatible = "samsung,exynos4412-tmu";
 	interrupt-parent = <&combiner>;
 	interrupts = <2 4>;
-	reg = <0x100C0000 0x100>;
-	clocks = <&clock 383>;
+	reg = <0x100c0000 0x100>;
+	clocks = <&clock CLK_TMU_APBIF>;
 	clock-names = "tmu_apbif";
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 9ce9fb3fc190..48e43b6b3213 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -89,7 +89,7 @@
 			compatible = "arm,gic-400", "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
 			interrupt-controller;
-			reg =	<0x10481000 0x1000>,
+			reg = <0x10481000 0x1000>,
 				<0x10482000 0x2000>,
 				<0x10484000 0x2000>,
 				<0x10486000 0x2000>;
@@ -104,31 +104,31 @@
 
 		serial_0: serial@12c00000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
+			reg = <0x12c00000 0x100>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial_1: serial@12c10000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
+			reg = <0x12c10000 0x100>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial_2: serial@12c20000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
+			reg = <0x12c20000 0x100>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		serial_3: serial@12c30000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C30000 0x100>;
+			reg = <0x12c30000 0x100>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		i2c_0: i2c@12c60000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12C60000 0x100>;
+			reg = <0x12c60000 0x100>;
 			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -138,7 +138,7 @@
 
 		i2c_1: i2c@12c70000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12C70000 0x100>;
+			reg = <0x12c70000 0x100>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -148,7 +148,7 @@
 
 		i2c_2: i2c@12c80000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12C80000 0x100>;
+			reg = <0x12c80000 0x100>;
 			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -158,7 +158,7 @@
 
 		i2c_3: i2c@12c90000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12C90000 0x100>;
+			reg = <0x12c90000 0x100>;
 			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -168,7 +168,7 @@
 
 		pwm: pwm@12dd0000 {
 			compatible = "samsung,exynos4210-pwm";
-			reg = <0x12DD0000 0x100>;
+			reg = <0x12dd0000 0x100>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
@@ -180,7 +180,7 @@
 
 		rtc: rtc@101e0000 {
 			compatible = "samsung,s3c6410-rtc";
-			reg = <0x101E0000 0x100>;
+			reg = <0x101e0000 0x100>;
 			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -198,7 +198,7 @@
 
 		dp: dp-controller@145b0000 {
 			compatible = "samsung,exynos5-dp";
-			reg = <0x145B0000 0x1000>;
+			reg = <0x145b0000 0x1000>;
 			interrupts = <10 3>;
 			interrupt-parent = <&combiner>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index a161f6237c7f..d586189966da 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -23,6 +23,11 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -30,42 +35,42 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		menu {
+		key-menu {
 			label = "SW-TACT2";
 			gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 			wakeup-source;
 		};
 
-		home {
+		key-home {
 			label = "SW-TACT3";
 			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 			wakeup-source;
 		};
 
-		up {
+		key-up {
 			label = "SW-TACT4";
 			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_UP>;
 			wakeup-source;
 		};
 
-		down {
+		key-down {
 			label = "SW-TACT5";
 			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DOWN>;
 			wakeup-source;
 		};
 
-		back {
+		key-back {
 			label = "SW-TACT6";
 			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 			wakeup-source;
 		};
 
-		wakeup {
+		key-wakeup {
 			label = "SW-TACT7";
 			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -73,6 +78,19 @@
 		};
 	};
 
+	/*
+	 * For unknown reasons HDMI-DDC does not work with Exynos I2C
+	 * controllers. Lets use software I2C over GPIO pins as a workaround.
+	 */
+	i2c_ddc: i2c-10 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_gpio_bus>;
+		sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+	};
+
 	panel: panel {
 		compatible = "boe,hv070wsa-100";
 		power-supply = <&vcc_3v3_reg>;
@@ -179,12 +197,15 @@
 		vddio-supply = <&vcc_1v8_reg>;
 		vddlvds-supply = <&vcc_3v3_reg>;
 		reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@1 {
-			reg = <1>;
-			bridge_out_ep: endpoint {
-				remote-endpoint = <&panel_ep>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@1 {
+				reg = <1>;
+				bridge_out_ep: endpoint {
+					remote-endpoint = <&panel_ep>;
+				};
 			};
 		};
 	};
@@ -218,6 +239,7 @@
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s5m8767_irq>;
+		wakeup-source;
 
 		vinb1-supply = <&main_dc_reg>;
 		vinb2-supply = <&main_dc_reg>;
@@ -239,9 +261,6 @@
 		vinl8-supply = <&buck8_reg>;
 		vinl9-supply = <&buck8_reg>;
 
-		s5m8767,pmic-buck2-dvs-voltage = <1300000>;
-		s5m8767,pmic-buck3-dvs-voltage = <1100000>;
-		s5m8767,pmic-buck4-dvs-voltage = <1200000>;
 		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
 					      <&gpd1 1 GPIO_ACTIVE_HIGH>,
 					      <&gpd1 2 GPIO_ACTIVE_HIGH>;
@@ -526,8 +545,8 @@
 		SPKVDD1-supply = <&main_dc_reg>;
 		SPKVDD2-supply = <&main_dc_reg>;
 
-		wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
-		wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
+		wlf,ldo1ena-gpios = <&gpb0 0 GPIO_ACTIVE_HIGH>;
+		wlf,ldo2ena-gpios = <&gpb0 1 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -575,6 +594,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 };
 
 &mmc_2 {
@@ -592,7 +612,7 @@
 };
 
 &pinctrl_0 {
-	s5m8767_irq: s5m8767-irq {
+	s5m8767_irq: s5m8767-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
@@ -617,20 +637,7 @@
 	status = "okay";
 };
 
-&soc {
-	/*
-	 * For unknown reasons HDMI-DDC does not work with Exynos I2C
-	 * controllers. Lets use software I2C over GPIO pins as a workaround.
-	 */
-	i2c_ddc: i2c-10 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_gpio_bus>;
-		status = "okay";
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
+&usbdrd {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
 };
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index d31a68672bfa..48732edadff1 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -9,10 +9,10 @@
  * tree nodes are listed in this file.
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -20,7 +20,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -28,7 +28,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa2: gpa2 {
+	gpa2: gpa2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -36,7 +36,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -44,7 +44,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb1: gpb1 {
+	gpb1: gpb1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -52,7 +52,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb2: gpb2 {
+	gpb2: gpb2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -60,7 +60,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb3: gpb3 {
+	gpb3: gpb3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -68,7 +68,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -76,7 +76,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -84,7 +84,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc2: gpc2 {
+	gpc2: gpc2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -92,7 +92,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc3: gpc3 {
+	gpc3: gpc3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -100,7 +100,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -108,7 +108,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -116,42 +116,42 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpy0: gpy0 {
+	gpy0: gpy0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy1: gpy1 {
+	gpy1: gpy1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy2: gpy2 {
+	gpy2: gpy2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy3: gpy3 {
+	gpy3: gpy3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy4: gpy4 {
+	gpy4: gpy4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy5: gpy5 {
+	gpy5: gpy5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy6: gpy6 {
+	gpy6: gpy6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpc4: gpc4 {
+	gpc4: gpc4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -159,7 +159,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -170,7 +170,7 @@
 			     <26 0>, <26 1>, <27 0>, <27 1>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -181,7 +181,7 @@
 			     <30 0>, <30 1>, <31 0>, <31 1>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -189,7 +189,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -197,104 +197,104 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_hs_bus: i2c2-hs-bus {
+	i2c2_hs_bus: i2c2-hs-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_gpio_bus: i2c2-gpio-bus {
+	i2c2_gpio_bus: i2c2-gpio-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c3_hs_bus: i2c3-hs-bus {
+	i2c3_hs_bus: i2c3-hs-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
-		samsung,pins = "gpa1-4", "gpa1-4";
+	uart3_data: uart3-data-pins {
+		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -302,7 +302,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -310,7 +310,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ac97_bus: ac97-bus {
+	ac97_bus: ac97-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -318,7 +318,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -326,7 +326,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -334,280 +334,280 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spdif_bus: spdif-bus {
+	spdif_bus: spdif-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpb1-3", "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpb2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpb2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpb2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpb2-2", "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpb3-0", "gpb3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpb3-2", "gpb3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_hs_bus: i2c0-hs-bus {
+	i2c0_hs_bus: i2c0-hs-bus-pins {
 		samsung,pins = "gpb3-0", "gpb3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_hs_bus: i2c1-hs-bus {
+	i2c1_hs_bus: i2c1-hs-bus-pins {
 		samsung,pins = "gpb3-2", "gpb3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpc0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpc0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpc0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpc0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpc2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpc2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpc2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpc2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpc3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpc3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus8: sd2-bus-width8 {
+	sd2_bus8: sd2-bus-width8-pins {
 		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_clk: sd3-clk {
+	sd3_clk: sd3-clk-pins {
 		samsung,pins = "gpc4-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cmd: sd3-cmd {
+	sd3_cmd: sd3-cmd-pins {
 		samsung,pins = "gpc4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cd: sd3-cd {
+	sd3_cd: sd3-cd-pins {
 		samsung,pins = "gpc4-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus1: sd3-bus-width1 {
+	sd3_bus1: sd3-bus-width1-pins {
 		samsung,pins = "gpc4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus4: sd3-bus-width4 {
+	sd3_bus4: sd3-bus-width4-pins {
 		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpd0-0", "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpd0-2", "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	dp_hpd: dp_hpd {
+	dp_hpd: dp-hpd-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_cec: hdmi-cec {
+	hdmi_cec: hdmi-cec-pins {
 		samsung,pins = "gpx3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd: hdmi-hpd {
+	hdmi_hpd: hdmi-hpd-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 };
 
 &pinctrl_1 {
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -615,7 +615,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -623,7 +623,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -631,7 +631,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -639,7 +639,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -647,7 +647,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -655,7 +655,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -663,7 +663,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph0: gph0 {
+	gph0: gph0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -671,7 +671,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph1: gph1 {
+	gph1: gph1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -679,7 +679,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	cam_gpio_a: cam-gpio-a {
+	cam_gpio_a: cam-gpio-a-pins {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			       "gpe1-0", "gpe1-1";
@@ -688,7 +688,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_gpio_b: cam-gpio-b {
+	cam_gpio_b: cam-gpio-b-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -696,42 +696,42 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_i2c2_bus: cam-i2c2-bus {
+	cam_i2c2_bus: cam-i2c2-bus-pins {
 		samsung,pins = "gpe0-6", "gpe1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_spi1_bus: cam-spi1-bus {
+	cam_spi1_bus: cam-spi1-bus-pins {
 		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_i2c1_bus: cam-i2c1-bus {
+	cam_i2c1_bus: cam-i2c1-bus-pins {
 		samsung,pins = "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_i2c0_bus: cam-i2c0-bus {
+	cam_i2c0_bus: cam-i2c0-bus-pins {
 		samsung,pins = "gpf0-0", "gpf0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_spi0_bus: cam-spi0-bus {
+	cam_spi0_bus: cam-spi0-bus-pins {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_bayrgb_bus: cam-bayrgb-bus {
+	cam_bayrgb_bus: cam-bayrgb-bus-pins {
 		samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
 			       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
 			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
@@ -742,7 +742,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a: cam-port-a {
+	cam_port_a: cam-port-a-pins {
 		samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
 			       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
 			       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
@@ -753,7 +753,7 @@
 };
 
 &pinctrl_2 {
-	gpv0: gpv0 {
+	gpv0: gpv0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -761,7 +761,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv1: gpv1 {
+	gpv1: gpv1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -769,7 +769,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv2: gpv2 {
+	gpv2: gpv2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -777,7 +777,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv3: gpv3 {
+	gpv3: gpv3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -785,7 +785,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv4: gpv4 {
+	gpv4: gpv4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -793,7 +793,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	c2c_rxd: c2c-rxd {
+	c2c_rxd: c2c-rxd-pins {
 		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
 			       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
 			       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
@@ -803,7 +803,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	c2c_txd: c2c-txd {
+	c2c_txd: c2c-txd-pins {
 		samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
 			       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
 			       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
@@ -815,7 +815,7 @@
 };
 
 &pinctrl_3 {
-	gpz: gpz {
+	gpz: gpz-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -823,7 +823,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 8b5a79a8720c..bb623726ef1e 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -17,6 +17,8 @@
 	compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
 
 	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
 	};
 
 	memory@40000000 {
@@ -118,6 +120,9 @@
 	status = "okay";
 	ddc = <&i2c_2>;
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
 };
 
 &i2c_0 {
@@ -126,7 +131,7 @@
 	samsung,i2c-max-bus-freq = <20000>;
 
 	eeprom@50 {
-		compatible = "samsung,s524ad0xd1";
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
 		reg = <0x50>;
 	};
 
@@ -134,7 +139,7 @@
 		compatible = "maxim,max77686";
 		reg = <0x09>;
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		#clock-cells = <1>;
@@ -286,7 +291,7 @@
 	samsung,i2c-max-bus-freq = <20000>;
 
 	eeprom@51 {
-		compatible = "samsung,s524ad0xd1";
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
 		reg = <0x51>;
 	};
 
@@ -347,6 +352,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 };
 
 &mmc_2 {
@@ -388,7 +394,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "w25x80";
+		compatible = "winbond,w25x80", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
 
@@ -410,10 +416,15 @@
 };
 
 &pinctrl_0 {
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
+
+&usbdrd {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 6635f6184051..59b2cc35c37b 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -15,6 +15,9 @@
 / {
 	aliases {
 		i2c104 = &i2c_104;
+		mmc0 = &mmc_0; /* eMMC */
+		mmc1 = &mmc_2; /* SD */
+		mmc2 = &mmc_3; /* WiFi */
 	};
 
 	memory@40000000 {
@@ -32,7 +35,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&power_key_irq &lid_irq>;
 
-		power {
+		power-key {
 			label = "Power";
 			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -292,7 +295,7 @@
 	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		wakeup-source;
@@ -549,6 +552,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 };
 
 /* uSD card */
@@ -587,63 +591,63 @@
 };
 
 &pinctrl_0 {
-	wifi_en: wifi-en {
+	wifi_en: wifi-en-pins {
 		samsung,pins = "gpx0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	wifi_rst: wifi-rst {
+	wifi_rst: wifi-rst-pins {
 		samsung,pins = "gpx0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	power_key_irq: power-key-irq {
+	power_key_irq: power-key-irq-pins {
 		samsung,pins = "gpx1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ec_irq: ec-irq {
+	ec_irq: ec-irq-pins {
 		samsung,pins = "gpx1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	tps65090_irq: tps65090-irq {
+	tps65090_irq: tps65090-irq-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	usb3_vbus_en: usb3-vbus-en {
+	usb3_vbus_en: usb3-vbus-en-pins {
 		samsung,pins = "gpx2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lid_irq: lid-irq {
+	lid_irq: lid-irq-pins {
 		samsung,pins = "gpx3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -652,14 +656,14 @@
 };
 
 &pinctrl_1 {
-	arb_their_claim: arb-their-claim {
+	arb_their_claim: arb-their-claim-pins {
 		samsung,pins = "gpe0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	arb_our_claim: arb-our-claim {
+	arb_our_claim: arb-our-claim-pins {
 		samsung,pins = "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -698,6 +702,11 @@
 	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
 };
 
+&usbdrd {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
 &usbdrd_dwc3 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
index 0822b778c035..3d32c3476e84 100644
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -14,6 +14,7 @@
 	model = "Google Snow Rev 5+";
 	compatible = "google,snow-rev5", "samsung,exynos5250",
 		"samsung,exynos5";
+	chassis-type = "laptop";
 
 	sound {
 		compatible = "google,snow-audio-max98090";
@@ -26,7 +27,7 @@
 		};
 
 		codec {
-			sound-dai = <&max98090 0>, <&hdmi>;
+			sound-dai = <&max98090>, <&hdmi>;
 		};
 	};
 };
@@ -41,12 +42,12 @@
 		pinctrl-0 = <&max98090_irq>;
 		clocks = <&pmu_system_controller 0>;
 		clock-names = "mclk";
-		#sound-dai-cells = <1>;
+		#sound-dai-cells = <0>;
 	};
 };
 
 &pinctrl_0 {
-	max98090_irq: max98090-irq {
+	max98090_irq: max98090-irq-pins {
 		samsung,pins = "gpx0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 9946dce54d74..906aa7aae710 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -12,6 +12,7 @@
 	model = "Google Snow";
 	compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250",
 		"samsung,exynos5";
+	chassis-type = "laptop";
 
 	sound {
 		compatible = "google,snow-audio-max98095";
@@ -42,7 +43,7 @@
 };
 
 &pinctrl_0 {
-	max98095_en: max98095-en {
+	max98095_en: max98095-en-pins {
 		samsung,pins = "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index fba1462b19df..c12bb17631b7 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -16,12 +16,18 @@
 / {
 	model = "Google Spring";
 	compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
+	chassis-type = "laptop";
 
 	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_1;
+	};
+
 	chosen {
 		bootargs = "console=tty1";
 		stdout-path = "serial3:115200n8";
@@ -32,7 +38,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&power_key_irq>, <&lid_irq>;
 
-		power {
+		power-key {
 			label = "Power";
 			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -430,6 +436,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 };
 
 /*
@@ -450,63 +457,63 @@
 };
 
 &pinctrl_0 {
-	s5m8767_dvs: s5m8767-dvs {
+	s5m8767_dvs: s5m8767-dvs-pins {
 		samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	dp_hpd_gpio: dp-hpd {
+	dp_hpd_gpio: dp-hpd-pins {
 		samsung,pins = "gpc3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	trackpad_irq: trackpad-irq {
+	trackpad_irq: trackpad-irq-pins {
 		samsung,pins = "gpx1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	power_key_irq: power-key-irq {
+	power_key_irq: power-key-irq-pins {
 		samsung,pins = "gpx1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ec_irq: ec-irq {
+	ec_irq: ec-irq-pins {
 		samsung,pins = "gpx1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	s5m8767_ds: s5m8767-ds {
+	s5m8767_ds: s5m8767-ds-pins {
 		samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	s5m8767_irq: s5m8767-irq {
+	s5m8767_irq: s5m8767-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lid_irq: lid-irq {
+	lid_irq: lid-irq-pins {
 		samsung,pins = "gpx3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -515,7 +522,7 @@
 };
 
 &pinctrl_1 {
-	hsic_reset: hsic-reset {
+	hsic_reset: hsic-reset-pins {
 		samsung,pins = "gpe1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -552,4 +559,9 @@
 	num-cs = <1>;
 };
 
+&usbdrd {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
 #include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 2ea2caaca4e2..1a4c6c028d03 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -30,10 +30,6 @@
 		gsc1 = &gsc_1;
 		gsc2 = &gsc_2;
 		gsc3 = &gsc_3;
-		mshc0 = &mmc_0;
-		mshc1 = &mmc_1;
-		mshc2 = &mmc_2;
-		mshc3 = &mmc_3;
 		i2c4 = &i2c_4;
 		i2c5 = &i2c_5;
 		i2c6 = &i2c_6;
@@ -50,6 +46,17 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
@@ -70,7 +77,7 @@
 		};
 	};
 
-	cpu0_opp_table: opp-table0 {
+	cpu0_opp_table: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -205,14 +212,14 @@
 
 		pd_disp1: power-domain@100440a0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440A0 0x20>;
+			reg = <0x100440a0 0x20>;
 			#power-domain-cells = <0>;
 			label = "DISP1";
 		};
 
 		pd_mau: power-domain@100440c0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440C0 0x20>;
+			reg = <0x100440c0 0x20>;
 			#power-domain-cells = <0>;
 			label = "MAU";
 		};
@@ -225,7 +232,7 @@
 
 		clock_audss: audss-clock-controller@3810000 {
 			compatible = "samsung,exynos5250-audss-clock";
-			reg = <0x03810000 0x0C>;
+			reg = <0x03810000 0x0c>;
 			#clock-cells = <1>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
 				 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
@@ -234,8 +241,9 @@
 		};
 
 		timer@101c0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x101C0000 0x800>;
+			compatible = "samsung,exynos5250-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x101c0000 0x800>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 			clock-names = "fin_pll", "mct";
 			interrupts-extended = <&combiner 23 3>,
@@ -278,7 +286,7 @@
 		};
 
 		pmu_system_controller: system-controller@10040000 {
-			compatible = "samsung,exynos5250-pmu", "syscon";
+			compatible = "samsung,exynos5250-pmu", "simple-mfd", "syscon";
 			reg = <0x10040000 0x5000>;
 			clock-names = "clkout16";
 			clocks = <&clock CLK_FIN_PLL>;
@@ -286,11 +294,21 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
+
+			dp_phy: dp-phy {
+				compatible = "samsung,exynos5250-dp-video-phy";
+				#phy-cells = <0>;
+			};
+
+			mipi_phy: mipi-phy {
+				compatible = "samsung,s5pv210-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
 		watchdog@101d0000 {
 			compatible = "samsung,exynos5250-wdt";
-			reg = <0x101D0000 0x100>;
+			reg = <0x101d0000 0x100>;
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_WDT>;
 			clock-names = "watchdog";
@@ -310,7 +328,7 @@
 
 		rotator: rotator@11c00000 {
 			compatible = "samsung,exynos5250-rotator";
-			reg = <0x11C00000 0x64>;
+			reg = <0x11c00000 0x64>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ROTATOR>;
 			clock-names = "rotator";
@@ -375,11 +393,10 @@
 
 		sata: sata@122f0000 {
 			compatible = "snps,dwc-ahci";
-			samsung,sata-freq = <66>;
-			reg = <0x122F0000 0x1ff>;
+			reg = <0x122f0000 0x1ff>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
-			clock-names = "sata", "sclk_sata";
+			clock-names = "sata", "pclk";
 			phys = <&sata_phy>;
 			phy-names = "sata-phy";
 			ports-implemented = <0x1>;
@@ -399,7 +416,7 @@
 		/* i2c_0-3 are defined in exynos5.dtsi */
 		i2c_4: i2c@12ca0000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CA0000 0x100>;
+			reg = <0x12ca0000 0x100>;
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -412,7 +429,7 @@
 
 		i2c_5: i2c@12cb0000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CB0000 0x100>;
+			reg = <0x12cb0000 0x100>;
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -425,7 +442,7 @@
 
 		i2c_6: i2c@12cc0000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CC0000 0x100>;
+			reg = <0x12cc0000 0x100>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -438,7 +455,7 @@
 
 		i2c_7: i2c@12cd0000 {
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x12CD0000 0x100>;
+			reg = <0x12cd0000 0x100>;
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -451,7 +468,7 @@
 
 		i2c_8: i2c@12ce0000 {
 			compatible = "samsung,s3c2440-hdmiphy-i2c";
-			reg = <0x12CE0000 0x1000>;
+			reg = <0x12ce0000 0x1000>;
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -459,7 +476,7 @@
 			clock-names = "i2c";
 			status = "disabled";
 
-			hdmiphy: hdmiphy@38 {
+			hdmiphy: hdmi-phy@38 {
 				compatible = "samsung,exynos4212-hdmiphy";
 				reg = <0x38>;
 			};
@@ -467,7 +484,7 @@
 
 		i2c_9: i2c@121d0000 {
 			compatible = "samsung,exynos5-sata-phy-i2c";
-			reg = <0x121D0000 0x100>;
+			reg = <0x121d0000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_SATA_PHYI2C>;
@@ -486,8 +503,7 @@
 			status = "disabled";
 			reg = <0x12d20000 0x100>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 5
-				&pdma0 4>;
+			dmas = <&pdma0 5>, <&pdma0 4>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -502,8 +518,7 @@
 			status = "disabled";
 			reg = <0x12d30000 0x100>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma1 5
-				&pdma1 4>;
+			dmas = <&pdma1 5>, <&pdma1 4>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -518,8 +533,7 @@
 			status = "disabled";
 			reg = <0x12d40000 0x100>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 7
-				&pdma0 6>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -600,7 +614,7 @@
 		i2s1: i2s@12d60000 {
 			compatible = "samsung,s3c6410-i2s";
 			status = "disabled";
-			reg = <0x12D60000 0x100>;
+			reg = <0x12d60000 0x100>;
 			dmas = <&pdma1 12>,
 				<&pdma1 11>;
 			dma-names = "tx", "rx";
@@ -615,7 +629,7 @@
 		i2s2: i2s@12d70000 {
 			compatible = "samsung,s3c6410-i2s";
 			status = "disabled";
-			reg = <0x12D70000 0x100>;
+			reg = <0x12d70000 0x100>;
 			dmas = <&pdma0 12>,
 				<&pdma0 11>;
 			dma-names = "tx", "rx";
@@ -627,17 +641,17 @@
 			#sound-dai-cells = <1>;
 		};
 
-		usb_dwc3 {
+		usbdrd: usb@12000000 {
 			compatible = "samsung,exynos5250-dwusb3";
 			clocks = <&clock CLK_USB3>;
 			clock-names = "usbdrd30";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x12000000 0x10000>;
 
-			usbdrd_dwc3: usb@12000000 {
+			usbdrd_dwc3: usb@0 {
 				compatible = "snps,dwc3";
-				reg = <0x12000000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
 				phy-names = "usb2-phy", "usb3-phy";
@@ -685,48 +699,40 @@
 			samsung,pmureg-phandle = <&pmu_system_controller>;
 		};
 
-		pdma0: pdma@121a0000 {
+		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
+			reg = <0x121a0000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@121b0000 {
+		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
+			reg = <0x121b0000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		mdma0: mdma@10800000 {
+		mdma0: dma-controller@10800000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 		};
 
-		mdma1: mdma@11c10000 {
+		mdma1: dma-controller@11c10000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
+			reg = <0x11c10000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 		};
 
 		gsc_0: gsc@13e00000 {
@@ -787,7 +793,7 @@
 
 		hdmicec: cec@101b0000 {
 			compatible = "samsung,s5p-cec";
-			reg = <0x101B0000 0x200>;
+			reg = <0x101b0000 0x200>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_HDMI_CEC>;
 			clock-names = "hdmicec";
@@ -810,19 +816,6 @@
 			status = "disabled";
 		};
 
-		dp_phy: video-phy {
-			compatible = "samsung,exynos5250-dp-video-phy";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <0>;
-		};
-
-		mipi_phy: video-phy@10040710 {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			reg = <0x10040710 0x100>;
-			#phy-cells = <1>;
-			syscon = <&pmu_system_controller>;
-		};
-
 		dsi_0: dsi@14500000 {
 			compatible = "samsung,exynos4210-mipi-dsi";
 			reg = <0x14500000 0x10000>;
@@ -839,7 +832,7 @@
 
 		adc: adc@12d10000 {
 			compatible = "samsung,exynos-adc-v1";
-			reg = <0x12D10000 0x100>;
+			reg = <0x12d10000 0x100>;
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ADC>;
 			clock-names = "adc";
@@ -850,7 +843,7 @@
 
 		sysmmu_g2d: sysmmu@10a60000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A60000 0x1000>;
+			reg = <0x10a60000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <24 5>;
 			clock-names = "sysmmu", "master";
@@ -882,7 +875,7 @@
 
 		sysmmu_rotator: sysmmu@11d40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11D40000 0x1000>;
+			reg = <0x11d40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 0>;
 			clock-names = "sysmmu", "master";
@@ -892,7 +885,7 @@
 
 		sysmmu_jpeg: sysmmu@11f20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F20000 0x1000>;
+			reg = <0x11f20000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 2>;
 			power-domains = <&pd_gsc>;
@@ -923,7 +916,7 @@
 
 		sysmmu_fimc_fd: sysmmu@132a0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132A0000 0x1000>;
+			reg = <0x132a0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 0>;
 			clock-names = "sysmmu";
@@ -953,7 +946,7 @@
 
 		sysmmu_fimc_mcuctl: sysmmu@132b0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132B0000 0x1000>;
+			reg = <0x132b0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 4>;
 			clock-names = "sysmmu";
@@ -963,7 +956,7 @@
 
 		sysmmu_fimc_odc: sysmmu@132c0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132C0000 0x1000>;
+			reg = <0x132c0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <11 0>;
 			clock-names = "sysmmu";
@@ -973,7 +966,7 @@
 
 		sysmmu_fimc_dis0: sysmmu@132d0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132D0000 0x1000>;
+			reg = <0x132d0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <10 4>;
 			clock-names = "sysmmu";
@@ -983,7 +976,7 @@
 
 		sysmmu_fimc_dis1: sysmmu@132e0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132E0000 0x1000>;
+			reg = <0x132e0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <9 4>;
 			clock-names = "sysmmu";
@@ -993,7 +986,7 @@
 
 		sysmmu_fimc_3dnr: sysmmu@132f0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x132F0000 0x1000>;
+			reg = <0x132f0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <5 6>;
 			clock-names = "sysmmu";
@@ -1003,7 +996,7 @@
 
 		sysmmu_fimc_lite0: sysmmu@13c40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C40000 0x1000>;
+			reg = <0x13c40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <3 4>;
 			power-domains = <&pd_gsc>;
@@ -1014,7 +1007,7 @@
 
 		sysmmu_fimc_lite1: sysmmu@13c50000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13C50000 0x1000>;
+			reg = <0x13c50000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <24 1>;
 			power-domains = <&pd_gsc>;
@@ -1025,7 +1018,7 @@
 
 		sysmmu_gsc0: sysmmu@13e80000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E80000 0x1000>;
+			reg = <0x13e80000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 0>;
 			power-domains = <&pd_gsc>;
@@ -1036,7 +1029,7 @@
 
 		sysmmu_gsc1: sysmmu@13e90000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E90000 0x1000>;
+			reg = <0x13e90000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 2>;
 			power-domains = <&pd_gsc>;
@@ -1047,7 +1040,7 @@
 
 		sysmmu_gsc2: sysmmu@13ea0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13EA0000 0x1000>;
+			reg = <0x13ea0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 4>;
 			power-domains = <&pd_gsc>;
@@ -1058,7 +1051,7 @@
 
 		sysmmu_gsc3: sysmmu@13eb0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13EB0000 0x1000>;
+			reg = <0x13eb0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 6>;
 			power-domains = <&pd_gsc>;
@@ -1108,7 +1101,7 @@
 &cpu_thermal {
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
-	thermal-sensors = <&tmu 0>;
+	thermal-sensors = <&tmu>;
 
 	cooling-maps {
 		map0 {
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
index 17e2f3e0d71e..43e4a541f479 100644
--- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -9,10 +9,10 @@
  * tree nodes are listed in this file.
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -20,7 +20,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -28,7 +28,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa2: gpa2 {
+	gpa2: gpa2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -36,7 +36,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -44,7 +44,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb1: gpb1 {
+	gpb1: gpb1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -52,7 +52,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb2: gpb2 {
+	gpb2: gpb2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -60,7 +60,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb3: gpb3 {
+	gpb3: gpb3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -68,7 +68,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb4: gpb4 {
+	gpb4: gpb4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -76,7 +76,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb5: gpb5 {
+	gpb5: gpb5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -84,7 +84,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -92,7 +92,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -100,7 +100,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd2: gpd2 {
+	gpd2: gpd2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -108,7 +108,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -116,7 +116,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -124,7 +124,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -132,7 +132,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -140,7 +140,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -148,7 +148,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -164,7 +164,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -180,7 +180,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -188,7 +188,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -196,63 +196,63 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	usb3_vbus0_en: usb3-vbus0-en {
+	usb3_vbus0_en: usb3-vbus0-en-pins {
 		samsung,pins = "gpa2-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 				"gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -260,7 +260,7 @@
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 				"gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -268,105 +268,105 @@
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	spdif1_bus: spdif1-bus {
+	spdif1_bus: spdif1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c0_hs_bus: i2c0-hs-bus {
+	i2c0_hs_bus: i2c0-hs-bus-pins {
 		samsung,pins = "gpb3-0", "gpb3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c1_hs_bus: i2c1-hs-bus {
+	i2c1_hs_bus: i2c1-hs-bus-pins {
 		samsung,pins = "gpb3-2", "gpb3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c2_hs_bus: i2c2-hs-bus {
+	i2c2_hs_bus: i2c2-hs-bus-pins {
 		samsung,pins = "gpb3-4", "gpb3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c3_hs_bus: i2c3-hs-bus {
+	i2c3_hs_bus: i2c3-hs-bus-pins {
 		samsung,pins = "gpb3-6", "gpb3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpb4-0", "gpb4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpb4-2", "gpb4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpb4-4", "gpb4-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpb4-6", "gpb4-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c8_bus: i2c8-bus {
+	i2c8_bus: i2c8-bus-pins {
 		samsung,pins = "gpb5-0", "gpb5-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c9_bus: i2c9-bus {
+	i2c9_bus: i2c9-bus-pins {
 		samsung,pins = "gpb5-2", "gpb5-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c10_bus: i2c10-bus {
+	i2c10_bus: i2c10-bus-pins {
 		samsung,pins = "gpb5-4", "gpb5-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c11_bus: i2c11-bus {
+	i2c11_bus: i2c11-bus-pins {
 		samsung,pins = "gpb5-6", "gpb5-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_gpio_a: cam-gpio-a {
+	cam_gpio_a: cam-gpio-a-pins {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			"gpe1-0", "gpe1-1";
@@ -375,7 +375,7 @@
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_gpio_b: cam-gpio-b {
+	cam_gpio_b: cam-gpio-b-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -383,28 +383,28 @@
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_i2c1_bus: cam-i2c1-bus {
+	cam_i2c1_bus: cam-i2c1-bus-pins {
 		samsung,pins = "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_i2c0_bus: cam-i2c0-bus {
+	cam_i2c0_bus: cam-i2c0-bus-pins {
 		samsung,pins = "gpf0-0", "gpf0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_spi0_bus: cam-spi0-bus {
+	cam_spi0_bus: cam-spi0-bus-pins {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_spi1_bus: cam-spi1-bus {
+	cam_spi1_bus: cam-spi1-bus-pins {
 		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -413,7 +413,7 @@
 };
 
 &pinctrl_1 {
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -421,7 +421,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -429,7 +429,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc2: gpc2 {
+	gpc2: gpc2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -437,7 +437,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc3: gpc3 {
+	gpc3: gpc3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -445,7 +445,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc4: gpc4 {
+	gpc4: gpc4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -453,112 +453,112 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpc0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpc0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpc0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_rdqs: sd0-rdqs {
+	sd0_rdqs: sd0-rdqs-pins {
 		samsung,pins = "gpc0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpc1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpc1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpc1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_bus8: sd1-bus-width8 {
+	sd1_bus8: sd1-bus-width8-pins {
 		samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpc2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpc2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -567,7 +567,7 @@
 };
 
 &pinctrl_2 {
-	gpz0: gpz0 {
+	gpz0: gpz0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -575,7 +575,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpz1: gpz1 {
+	gpz1: gpz1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index 0dc2ec16aa0a..d072a7398866 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -18,6 +18,11 @@
 		reg = <0x20000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -29,6 +34,27 @@
 		#clock-cells = <0>;
 	};
 
+	ioclk_pcm: clock-pcm-ext {
+		compatible = "fixed-clock";
+		clock-frequency = <2048000>;
+		clock-output-names = "ioclk_pcm_extclk";
+		#clock-cells = <0>;
+	};
+
+	ioclk_i2s: clock-i2s-cd {
+		compatible = "fixed-clock";
+		clock-frequency = <147456000>;
+		clock-output-names = "ioclk_i2s_cdclk";
+		#clock-cells = <0>;
+	};
+
+	ioclk_spdif: clock-spdif-ext {
+		compatible = "fixed-clock";
+		clock-frequency = <49152000>;
+		clock-output-names = "ioclk_spdif_extclk";
+		#clock-cells = <0>;
+	};
+
 	xrtcxti: xrtcxti {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
@@ -38,7 +64,7 @@
 };
 
 &pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -66,8 +92,9 @@
 	status = "okay";
 	broken-cd;
 	cap-mmc-highspeed;
-	supports-hs200-mode; /* 200 MHz */
+	mmc-hs200-1_8v;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 973448c4ad93..a97449b4640c 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -34,42 +34,68 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+				core1 {
+					cpu = <&cpu3>;
+				};
+				core2 {
+					cpu = <&cpu4>;
+				};
+				core3 {
+					cpu = <&cpu5>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
 			cci-control-port = <&cci_control1>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
 			cci-control-port = <&cci_control1>;
 		};
 
-		cpu@100 {
+		cpu2: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x100>;
 			cci-control-port = <&cci_control0>;
 		};
 
-		cpu@101 {
+		cpu3: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
 			cci-control-port = <&cci_control0>;
 		};
 
-		cpu@102 {
+		cpu4: cpu@102 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
 			cci-control-port = <&cci_control0>;
 		};
 
-		cpu@103 {
+		cpu5: cpu@103 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x103>;
@@ -87,78 +113,206 @@
 			compatible = "samsung,exynos5260-clock-top";
 			reg = <0x10010000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_mif MIF_DOUT_MEM_PLL>,
+				 <&clock_mif MIF_DOUT_BUS_PLL>,
+				 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+			clock-names = "fin_pll",
+				      "dout_mem_pll",
+				      "dout_bus_pll",
+				      "dout_media_pll";
 		};
 
 		clock_peri: clock-controller@10200000 {
 			compatible = "samsung,exynos5260-clock-peri";
 			reg = <0x10200000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&ioclk_pcm>,
+				 <&ioclk_i2s>,
+				 <&ioclk_spdif>,
+				 <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_PERI_66>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_UART0>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_UART1>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_UART2>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_SPI0_B>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_SPI1_B>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_SPI2_B>,
+				 <&clock_top TOP_DOUT_ACLK_PERI_AUD>;
+			clock-names = "fin_pll",
+				      "ioclk_pcm_extclk",
+				      "ioclk_i2s_cdclk",
+				      "ioclk_spdif_extclk",
+				      "phyclk_hdmi_phy_ref_cko",
+				      "dout_aclk_peri_66",
+				      "dout_sclk_peri_uart0",
+				      "dout_sclk_peri_uart1",
+				      "dout_sclk_peri_uart2",
+				      "dout_sclk_peri_spi0_b",
+				      "dout_sclk_peri_spi1_b",
+				      "dout_sclk_peri_spi2_b",
+				      "dout_aclk_peri_aud";
 		};
 
 		clock_egl: clock-controller@10600000 {
 			compatible = "samsung,exynos5260-clock-egl";
 			reg = <0x10600000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_mif MIF_DOUT_BUS_PLL>;
+			clock-names = "fin_pll",
+				      "dout_bus_pll";
 		};
 
 		clock_kfc: clock-controller@10700000 {
 			compatible = "samsung,exynos5260-clock-kfc";
 			reg = <0x10700000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+			clock-names = "fin_pll",
+				      "dout_media_pll";
 		};
 
 		clock_g2d: clock-controller@10a00000 {
 			compatible = "samsung,exynos5260-clock-g2d";
-			reg = <0x10A00000 0x10000>;
+			reg = <0x10a00000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_G2D_333>;
+			clock-names = "fin_pll",
+				      "dout_aclk_g2d_333";
 		};
 
 		clock_mif: clock-controller@10ce0000 {
 			compatible = "samsung,exynos5260-clock-mif";
-			reg = <0x10CE0000 0x10000>;
+			reg = <0x10ce0000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
 		};
 
 		clock_mfc: clock-controller@11090000 {
 			compatible = "samsung,exynos5260-clock-mfc";
 			reg = <0x11090000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_MFC_333>;
+			clock-names = "fin_pll",
+				      "dout_aclk_mfc_333";
 		};
 
 		clock_g3d: clock-controller@11830000 {
 			compatible = "samsung,exynos5260-clock-g3d";
 			reg = <0x11830000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
 		};
 
 		clock_fsys: clock-controller@122e0000 {
 			compatible = "samsung,exynos5260-clock-fsys";
-			reg = <0x122E0000 0x10000>;
+			reg = <0x122e0000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_FSYS_200>;
+			clock-names = "fin_pll",
+				      "phyclk_usbhost20_phy_phyclock",
+				      "phyclk_usbhost20_phy_freeclk",
+				      "phyclk_usbhost20_phy_clk48mohci",
+				      "phyclk_usbdrd30_udrd30_pipe_pclk",
+				      "phyclk_usbdrd30_udrd30_phyclock",
+				      "dout_aclk_fsys_200";
 		};
 
 		clock_aud: clock-controller@128c0000 {
 			compatible = "samsung,exynos5260-clock-aud";
-			reg = <0x128C0000 0x10000>;
+			reg = <0x128c0000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_FOUT_AUD_PLL>,
+				 <&ioclk_i2s>,
+				 <&ioclk_pcm>;
+			clock-names = "fin_pll",
+				      "fout_aud_pll",
+				      "ioclk_i2s_cdclk",
+				      "ioclk_pcm_extclk";
 		};
 
 		clock_isp: clock-controller@133c0000 {
 			compatible = "samsung,exynos5260-clock-isp";
-			reg = <0x133C0000 0x10000>;
+			reg = <0x133c0000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_ISP1_266>,
+				 <&clock_top TOP_DOUT_ACLK_ISP1_400>,
+				 <&clock_top TOP_MOUT_ACLK_ISP1_266>;
+			clock-names = "fin_pll",
+				      "dout_aclk_isp1_266",
+				      "dout_aclk_isp1_400",
+				      "mout_aclk_isp1_266";
 		};
 
 		clock_gscl: clock-controller@13f00000 {
 			compatible = "samsung,exynos5260-clock-gscl";
-			reg = <0x13F00000 0x10000>;
+			reg = <0x13f00000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_GSCL_400>,
+				 <&clock_top TOP_DOUT_ACLK_GSCL_333>;
+			clock-names = "fin_pll",
+				      "dout_aclk_gscl_400",
+				      "dout_aclk_gscl_333";
 		};
 
 		clock_disp: clock-controller@14550000 {
 			compatible = "samsung,exynos5260-clock-disp";
 			reg = <0x14550000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&ioclk_spdif>,
+				 <&clock_top TOP_DOUT_ACLK_PERI_AUD>,
+				 <&clock_top TOP_DOUT_ACLK_DISP_222>,
+				 <&clock_top TOP_DOUT_SCLK_DISP_PIXEL>,
+				 <&clock_top TOP_DOUT_ACLK_DISP_333>;
+			clock-names = "fin_pll",
+				      "phyclk_dptx_phy_ch3_txd_clk",
+				      "phyclk_dptx_phy_ch2_txd_clk",
+				      "phyclk_dptx_phy_ch1_txd_clk",
+				      "phyclk_dptx_phy_ch0_txd_clk",
+				      "phyclk_hdmi_phy_tmds_clko",
+				      "phyclk_hdmi_phy_ref_clko",
+				      "phyclk_hdmi_phy_pixel_clko",
+				      "phyclk_hdmi_link_o_tmds_clkhi",
+				      "phyclk_mipi_dphy_4l_m_txbyte_clkhs",
+				      "phyclk_dptx_phy_o_ref_clk_24m",
+				      "phyclk_dptx_phy_clk_div2",
+				      "phyclk_mipi_dphy_4l_m_rxclkesc0",
+				      "phyclk_hdmi_phy_ref_cko",
+				      "ioclk_spdif_extclk",
+				      "dout_aclk_peri_aud",
+				      "dout_aclk_disp_222",
+				      "dout_sclk_disp_pixel",
+				      "dout_aclk_disp_333";
 		};
 
 		gic: interrupt-controller@10481000 {
@@ -179,8 +333,9 @@
 		};
 
 		mct: timer@100b0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x100B0000 0x1000>;
+			compatible = "samsung,exynos5260-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x100b0000 0x1000>;
 			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
 			clock-names = "fin_pll", "mct";
 			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -201,8 +356,8 @@
 			compatible = "arm,cci-400";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			reg = <0x10F00000 0x1000>;
-			ranges = <0x0 0x10F00000 0x6000>;
+			reg = <0x10f00000 0x1000>;
+			ranges = <0x0 0x10f00000 0x6000>;
 
 			cci_control0: slave-if@4000 {
 				compatible = "arm,cci-400-ctrl-if";
@@ -237,18 +392,18 @@
 
 		pinctrl_2: pinctrl@128b0000 {
 			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x128B0000 0x1000>;
+			reg = <0x128b0000 0x1000>;
 			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		pmu_system_controller: system-controller@10d50000 {
 			compatible = "samsung,exynos5260-pmu", "syscon";
-			reg = <0x10D50000 0x10000>;
+			reg = <0x10d50000 0x10000>;
 		};
 
 		uart0: serial@12c00000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
+			reg = <0x12c00000 0x100>;
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -257,7 +412,7 @@
 
 		uart1: serial@12c10000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
+			reg = <0x12c10000 0x100>;
 			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -266,7 +421,7 @@
 
 		uart2: serial@12c20000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
+			reg = <0x12c20000 0x100>;
 			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
 			clock-names = "uart", "clk_uart_baud0";
@@ -342,9 +497,9 @@
 			status = "disabled";
 		};
 
-		hsi2c_0: hsi2c@12da0000 {
+		hsi2c_0: i2c@12da0000 {
 			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DA0000 0x1000>;
+			reg = <0x12da0000 0x1000>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -355,9 +510,9 @@
 			status = "disabled";
 		};
 
-		hsi2c_1: hsi2c@12db0000 {
+		hsi2c_1: i2c@12db0000 {
 			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DB0000 0x1000>;
+			reg = <0x12db0000 0x1000>;
 			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -368,9 +523,9 @@
 			status = "disabled";
 		};
 
-		hsi2c_2: hsi2c@12dc0000 {
+		hsi2c_2: i2c@12dc0000 {
 			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DC0000 0x1000>;
+			reg = <0x12dc0000 0x1000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -381,9 +536,9 @@
 			status = "disabled";
 		};
 
-		hsi2c_3: hsi2c@12dd0000 {
+		hsi2c_3: i2c@12dd0000 {
 			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DD0000 0x1000>;
+			reg = <0x12dd0000 0x1000>;
 			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 949c0721cdb4..882fc77c4bc4 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -21,6 +21,8 @@
 
 	aliases {
 		ethernet = &ethernet;
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
 	};
 
 	memory@40000000 {
@@ -120,7 +122,6 @@
 };
 
 &cpu0_thermal {
-	thermal-sensors = <&tmu_cpu0 0>;
 	polling-delay-passive = <0>;
 	polling-delay = <0>;
 
@@ -164,8 +165,7 @@
 };
 
 &hsi2c_4 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <400000>;
+	clock-frequency = <400000>;
 	status = "okay";
 
 	usb3503: usb-hub@8 {
@@ -188,8 +188,8 @@
 		interrupt-parent = <&gpx0>;
 		interrupts = <4 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>,
-			    <&pmic_dvs_3>;
+		pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>;
+		wakeup-source;
 		#clock-cells = <1>;
 
 		inl1-supply = <&buck5_reg>;
@@ -393,10 +393,6 @@
 				regulator-always-on;
 			};
 
-			ldo16_reg: LDO16 {
-				regulator-name = "ldo16";
-			};
-
 			ldo17_reg: LDO17 {
 				regulator-name = "cam_sensor_core";
 				regulator-min-microvolt = <1200000>;
@@ -426,10 +422,6 @@
 				regulator-max-microvolt = <2850000>;
 			};
 
-			ldo22_reg: LDO22 {
-				regulator-name = "ldo22";
-			};
-
 			ldo23_reg: LDO23 {
 				regulator-name = "dp_p3v3";
 				regulator-min-microvolt = <3300000>;
@@ -476,10 +468,6 @@
 				regulator-always-on;
 			};
 
-			ldo31_reg: LDO31 {
-				regulator-name = "ldo31";
-			};
-
 			/* On revisions with ti,ina231 this is sensor VS */
 			ldo32_reg: LDO32 {
 				regulator-name = "vs_power_meter";
@@ -527,6 +515,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	vmmc-supply = <&ldo20_reg>;
 	vqmmc-supply = <&ldo11_reg>;
@@ -547,14 +536,14 @@
 };
 
 &pinctrl_0 {
-	emmc_nrst_pin: emmc-nrst {
+	emmc_nrst_pin: emmc-nrst-pins {
 		samsung,pins = "gpd1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	sd2_wp: sd2-wp {
+	sd2_wp: sd2-wp-pins {
 		samsung,pins = "gpm5-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		/* Pin is floating so be sure to disable write-protect */
@@ -562,21 +551,14 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	pmic_dvs_3: pmic-dvs-3 {
-		samsung,pins = "gpx0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pmic_dvs_2: pmic-dvs-2 {
-		samsung,pins = "gpx0-1";
+	pmic_dvs_2: pmic-dvs-2-pins {
+		samsung,pins = "gpx0-0", "gpx0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_dvs_1: pmic-dvs-1 {
+	pmic_dvs_1: pmic-dvs-1-pins {
 		samsung,pins = "gpx0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -584,7 +566,7 @@
 		samsung,pin-val = <1>;
 	};
 
-	max77802_irq: max77802-irq {
+	max77802_irq: max77802-irq-pins {
 		samsung,pins = "gpx0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -674,8 +656,8 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	ethernet: usbether@2 {
-		compatible = "usb0424,9730";
+	ethernet: ethernet@2 {
+		compatible = "usb424,9730";
 		reg = <2>;
 		local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
 	};
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index d0aa18443a69..f7b923382892 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -6,10 +6,10 @@
  *              https://www.hardkernel.com
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -17,7 +17,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -25,7 +25,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa2: gpa2 {
+	gpa2: gpa2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -33,7 +33,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -41,7 +41,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb1: gpb1 {
+	gpb1: gpb1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -49,7 +49,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb2: gpb2 {
+	gpb2: gpb2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -57,7 +57,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb3: gpb3 {
+	gpb3: gpb3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -65,7 +65,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -73,7 +73,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc3: gpc3 {
+	gpc3: gpc3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -81,7 +81,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -89,7 +89,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc2: gpc2 {
+	gpc2: gpc2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -97,12 +97,12 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm5: gpm5 {
+	gpm5: gpm5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -110,7 +110,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -118,7 +118,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -126,7 +126,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -134,7 +134,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -142,7 +142,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -150,7 +150,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -158,7 +158,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -166,7 +166,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph0: gph0 {
+	gph0: gph0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -174,7 +174,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph1: gph1 {
+	gph1: gph1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -182,52 +182,52 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm7: gpm7 {
+	gpm7: gpm7-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy0: gpy0 {
+	gpy0: gpy0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy1: gpy1 {
+	gpy1: gpy1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy2: gpy2 {
+	gpy2: gpy2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy3: gpy3 {
+	gpy3: gpy3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy4: gpy4 {
+	gpy4: gpy4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy5: gpy5 {
+	gpy5: gpy5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy6: gpy6 {
+	gpy6: gpy6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy7: gpy7 {
+	gpy7: gpy7-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -235,16 +235,16 @@
 		interrupt-parent = <&combiner>;
 		#interrupt-cells = <2>;
 		interrupts = <23 0>,
-		             <24 0>,
-		             <25 0>,
-		             <25 1>,
-		             <26 0>,
-		             <26 1>,
-		             <27 0>,
-		             <27 1>;
+			     <24 0>,
+			     <25 0>,
+			     <25 1>,
+			     <26 0>,
+			     <26 1>,
+			     <27 0>,
+			     <27 1>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -252,16 +252,16 @@
 		interrupt-parent = <&combiner>;
 		#interrupt-cells = <2>;
 		interrupts = <28 0>,
-		             <28 1>,
-		             <29 0>,
-		             <29 1>,
-		             <30 0>,
-		             <30 1>,
-		             <31 0>,
-		             <31 1>;
+			     <28 1>,
+			     <29 0>,
+			     <29 1>,
+			     <30 0>,
+			     <30 1>,
+			     <31 0>,
+			     <31 1>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -269,7 +269,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -277,210 +277,210 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c4_hs_bus: i2c4-hs-bus {
+	i2c4_hs_bus: i2c4-hs-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c5_hs_bus: i2c5-hs-bus {
+	i2c5_hs_bus: i2c5-hs-bus-pins {
 		samsung,pins = "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c6_hs_bus: i2c6-hs-bus {
+	i2c6_hs_bus: i2c6-hs-bus-pins {
 		samsung,pins = "gpb1-3", "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpb2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpb2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpb2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c7_hs_bus: i2c7-hs-bus {
+	i2c7_hs_bus: i2c7-hs-bus-pins {
 		samsung,pins = "gpb2-2", "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpb3-0", "gpb3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpb3-2", "gpb3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpc0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpc0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpc0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpc0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpc2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpc2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -489,7 +489,7 @@
 };
 
 &pinctrl_1 {
-	gpj0: gpj0 {
+	gpj0: gpj0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -497,7 +497,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj1: gpj1 {
+	gpj1: gpj1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -505,7 +505,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj2: gpj2 {
+	gpj2: gpj2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -513,7 +513,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj3: gpj3 {
+	gpj3: gpj3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -521,7 +521,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj4: gpj4 {
+	gpj4: gpj4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -529,7 +529,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -537,7 +537,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk1: gpk1 {
+	gpk1: gpk1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -545,7 +545,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk2: gpk2 {
+	gpk2: gpk2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -553,7 +553,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk3: gpk3 {
+	gpk3: gpk3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -561,28 +561,28 @@
 		#interrupt-cells = <2>;
 	};
 
-	usb3_1_oc: usb3-1-oc {
+	usb3_1_oc: usb3-1-oc-pins {
 		samsung,pins = "gpk2-4", "gpk2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb3_1_vbusctrl: usb3-1-vbusctrl {
+	usb3_1_vbusctrl: usb3-1-vbusctrl-pins {
 		samsung,pins = "gpk2-6", "gpk2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb3_0_oc: usb3-0-oc {
+	usb3_0_oc: usb3-0-oc-pins {
 		samsung,pins = "gpk3-0", "gpk3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb3_0_vbusctrl: usb3-0-vbusctrl {
+	usb3_0_vbusctrl: usb3-0-vbusctrl-pins {
 		samsung,pins = "gpk3-2", "gpk3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -591,7 +591,7 @@
 };
 
 &pinctrl_2 {
-	gpv0: gpv0 {
+	gpv0: gpv0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -599,7 +599,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv1: gpv1 {
+	gpv1: gpv1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -607,7 +607,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv2: gpv2 {
+	gpv2: gpv2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -615,7 +615,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv3: gpv3 {
+	gpv3: gpv3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -623,7 +623,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv4: gpv4 {
+	gpv4: gpv4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -633,7 +633,7 @@
 };
 
 &pinctrl_3 {
-	gpz: gpz {
+	gpz: gpz-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -641,7 +641,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	audi2s0_bus: audi2s0-bus {
+	audi2s0_bus: audi2s0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4";
 		samsung,pin-function = <2>;
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 2a3ade77a2de..bb29b76f6f6a 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -18,6 +18,11 @@
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -41,6 +46,19 @@
 		reg = <0x02037000 0x1000>;
 	};
 
+	vdd10_usb3: voltage-regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD10_USB3";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	vdd33_usb3: voltage-regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD33_USB3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &mmc_0 {
@@ -48,6 +66,7 @@
 	cap-mmc-highspeed;
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
@@ -66,14 +85,14 @@
 };
 
 &pinctrl_0 {
-	srom_ctl: srom-ctl {
+	srom_ctl: srom-ctl-pins {
 		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
 			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	srom_ebi: srom-ebi {
+	srom_ebi: srom-ebi-pins {
 		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
 			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
 			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
@@ -121,3 +140,13 @@
 &serial_2 {
 	status = "okay";
 };
+
+&usbdrd3_0 {
+	vdd10-supply = <&vdd10_usb3>;
+	vdd33-supply = <&vdd33_usb3>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&vdd10_usb3>;
+	vdd33-supply = <&vdd33_usb3>;
+};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 584ce62361b1..350b8afa0a3a 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -81,7 +81,7 @@
 
 		clock_audss: audss-clock-controller@3810000 {
 			compatible = "samsung,exynos5410-audss-clock";
-			reg = <0x03810000 0x0C>;
+			reg = <0x03810000 0x0c>;
 			#clock-cells = <1>;
 			clocks = <&fin_pll>, <&clock CLK_FOUT_EPLL>;
 			clock-names = "pll_ref", "pll_in";
@@ -189,26 +189,22 @@
 			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		pdma0: pdma@121a0000 {
+		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121a0000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@121b0000 {
+		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121b0000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
 		audi2s0: i2s@3830000 {
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 1aad4859c5f1..809ddda02e53 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -23,6 +23,11 @@
 		reg = <0x20000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
 		stdout-path = "serial3:115200n8";
 	};
@@ -42,7 +47,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "SW-TACT1";
 			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -352,6 +357,7 @@
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s2mps11_irq>;
+		wakeup-source;
 
 		s2mps11_osc: clocks {
 			compatible = "samsung,s2mps11-clk";
@@ -777,6 +783,7 @@
 	status = "okay";
 	non-removable;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
@@ -807,7 +814,7 @@
 };
 
 &pinctrl_0 {
-	s2mps11_irq: s2mps11-irq {
+	s2mps11_irq: s2mps11-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -824,3 +831,13 @@
 &usbdrd_dwc3_1 {
 	dr_mode = "host";
 };
+
+&usbdrd3_0 {
+	vdd10-supply = <&ldo11_reg>;
+	vdd33-supply = <&ldo9_reg>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&ldo11_reg>;
+	vdd33-supply = <&ldo9_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5420-chagall-wifi.dts b/arch/arm/boot/dts/exynos5420-chagall-wifi.dts
new file mode 100644
index 000000000000..1319344a2c74
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-chagall-wifi.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5420 Chagall WiFi board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Henrik Grimler
+ */
+
+/dts-v1/;
+#include "exynos5420-galaxy-tab-common.dtsi"
+
+/ {
+	model = "Samsung Chagall WiFi based on Exynos5420";
+	compatible = "samsung,chagall-wifi", "samsung,exynos5420", \
+		     "samsung,exynos5";
+};
+
+&ldo15_reg {
+	/* Unused */
+	regulator-name = "VDD_LDO15";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&ldo17_reg {
+	regulator-name = "VDD_IRLED_3V3";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3350000>;
+	regulator-always-on;
+	regulator-boot-on;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo28_reg {
+	/* Unused */
+	regulator-name = "VDD_LDO28";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&ldo29_reg {
+	regulator-name = "VDD_TCON_1V8";
+	regulator-min-microvolt = <1900000>;
+	regulator-max-microvolt = <1900000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo31_reg {
+	regulator-name = "VDD_GRIP_1V8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-boot-on;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo32_reg {
+	regulator-name = "VDD_TSP_1V8";
+	regulator-min-microvolt = <1900000>;
+	regulator-max-microvolt = <1900000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
index 58d1c54cf925..e9f4eb75b50f 100644
--- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
@@ -22,6 +22,38 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
diff --git a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
new file mode 100644
index 000000000000..f525b2f5e4e0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
@@ -0,0 +1,696 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Base DT for Samsung's family of tablets based on Exynos5420.
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Henrik Grimler
+ */
+
+/dts-v1/;
+#include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
+
+/ {
+	chassis-type = "tablet";
+
+	/*
+	 * To successfully boot the mainline kernel with the stock
+	 * bootloader (SBOOT), the tlb needs to be flushed after the
+	 * page table pointer has been updated in __common_mmu_cache_on.
+	 * The same hack is also needed to boot exynos4412-i9300 with
+	 * stock bootloader, and probably other Samsung devices of
+	 * similar age.  See
+	 * https://lore.kernel.org/all/1355276466-18295-1-git-send-email-arve@android.com
+	 * for more details.
+	 */
+
+	aliases {
+		mmc0 = &mmc_0;
+		mmc2 = &mmc_2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0xc0000000>;
+	};
+
+	firmware@2073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			debounce-interval = <10>;
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-home {
+			debounce-interval = <10>;
+			gpios = <&gpx0 5 GPIO_ACTIVE_LOW>;
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			debounce-interval = <10>;
+			gpios = <&gpx0 2 GPIO_ACTIVE_LOW>;
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			debounce-interval = <10>;
+			gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&cci {
+	/* CCI is disabled in hardware */
+	status = "disabled";
+};
+
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&buck4_reg>;
+};
+
+&hsi2c_7 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps11_irq>;
+
+		s2mps11_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps11_ap", "s2mps11_cp",
+					     "s2mps11_bt";
+		};
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF_1V1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D_1V0";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_MEM_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VDD_KFC_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VIN_LLDO_1V4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VIN_MLDO_2V0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-always-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VIN_HLDO_3V5";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-always-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "VDD_CAM_ISP_1V0";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3550000>;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_APIO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDD_APIO_MMC01_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD_ADC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				/* Unused */
+				regulator-name = "VDD_LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD_MIPI_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD_MIPI_PLL_ABB1_18V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo8_reg: LDO8 {
+				/* Unused */
+				regulator-name = "VDD_LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD_UOTG_3V0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDDQ_PRE_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_HSIC_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD_HSIC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDD_APIO_MMC2_2V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD_MOTOR_3V0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD_LDO15";
+				/*
+				 * LDO15 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD_AP_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDD_LDO17";
+				/*
+				 * LDO17 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo18_reg: LDO18 {
+				/* Unused */
+				regulator-name = "VDD_LDO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VDD_VTF_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDD_CAM1_CAM_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VDD_CAM_IO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VDD_CAM0_S_CORE_1V1";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "VDD_MIFS_1V1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VDD_TSP_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo25_reg: LDO25 {
+				/* Unused */
+				regulator-name = "VDD_LDO25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "VDD_CAM0_AF_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "VDD_G3DS_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "VDD_LDO28";
+				/*
+				 * LDO28 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "VDD_LDO29";
+				/*
+				 * LDO29 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "VDD_TOUCH_1V8";
+				regulator-min-microvolt = <1900000>;
+				regulator-max-microvolt = <1900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo31_reg: LDO31 {
+				regulator-name = "VDD_LDO31";
+				/*
+				 * LDO31 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "VDD_LDO32";
+				/*
+				 * LDO32 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "VDD_MHL_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "VDD_MHL_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "VDD_SIL_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo36_reg: LDO36 {
+				/* Unused */
+				regulator-name = "VDD_LDO36";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo37_reg: LDO37 {
+				/* Unused */
+				regulator-name = "VDD_LDO37";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo38_reg: LDO38 {
+				regulator-name = "VDD_KEY_LED_3V3";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&mixer {
+	status = "okay";
+};
+
+/* Internal storage */
+&mmc_0 {
+	status = "okay";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	pinctrl-names = "default";
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	vqmmc-supply = <&ldo3_reg>;
+};
+
+/* External sdcard */
+&mmc_2 {
+	status = "okay";
+	bus-width = <4>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpx2 4 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &mmc2_cd &sd2_bus1 &sd2_bus4>;
+	pinctrl-names = "default";
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&ldo19_reg>;
+	vqmmc-supply = <&ldo13_reg>;
+};
+
+&pinctrl_0 {
+	mmc2_cd: mmc2-cd-pins {
+		samsung,pins = "gpx2-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	s2mps11_irq: s2mps11-irq-pins {
+		samsung,pins = "gpx3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5420-klimt-wifi.dts b/arch/arm/boot/dts/exynos5420-klimt-wifi.dts
new file mode 100644
index 000000000000..011787b1bbf0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-klimt-wifi.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5420 Klimt WiFi board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Henrik Grimler
+ */
+
+/dts-v1/;
+#include "exynos5420-galaxy-tab-common.dtsi"
+
+/ {
+	model = "Samsung Klimt WiFi based on Exynos5420";
+	compatible = "samsung,klimt-wifi", "samsung,exynos5420", \
+		     "samsung,exynos5";
+};
+
+&ldo15_reg {
+	/* Unused */
+	regulator-name = "VDD_LDO15";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&ldo17_reg {
+	regulator-name = "VDD_VCI_3V0";
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo28_reg {
+	regulator-name = "VDD3_1V8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo29_reg {
+	regulator-name = "VDDR_1V6";
+	regulator-min-microvolt = <1600000>;
+	regulator-max-microvolt = <1600000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo31_reg {
+	/* Unused */
+	regulator-name = "VDD_LDO31";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&ldo32_reg {
+	regulator-name = "VDD_TSP_1V8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&mmc_2 {
+	sd-uhs-sdr104;
+};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 315b3dc9c017..7a48f2b32819 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -26,10 +26,14 @@
 		"google,pit-rev7", "google,pit-rev6",
 		"google,pit", "google,peach","samsung,exynos5420",
 		"samsung,exynos5";
+	chassis-type = "laptop";
 
 	aliases {
 		/* Assign 20 so we don't get confused w/ builtin ones */
 		i2c20 = &i2c_tunnel;
+		mmc0 = &mmc_0; /* eMMC */
+		mmc1 = &mmc_2; /* uSD */
+		mmc2 = &mmc_1; /* WiFi */
 	};
 
 	backlight: backlight {
@@ -59,7 +63,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&power_key_irq &lid_irq>;
 
-		power {
+		power-key {
 			label = "Power";
 			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -211,7 +215,7 @@
 		interrupts = <1 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
-			    <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+			    <&pmic_dvs_1>, <&pmic_dvs_2>;
 		wakeup-source;
 		reg = <0x9>;
 		#clock-cells = <1>;
@@ -721,6 +725,7 @@
 /* eMMC flash */
 &mmc_0 {
 	status = "okay";
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	cap-mmc-highspeed;
 	non-removable;
@@ -773,14 +778,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mask_tpm_reset>;
 
-	wifi_en: wifi-en {
+	wifi_en: wifi-en-pins {
 		samsung,pins = "gpx0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	max98090_irq: max98090-irq {
+	max98090_irq: max98090-irq-pins {
 		samsung,pins = "gpx0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -788,7 +793,7 @@
 	};
 
 	/* We need GPX0_6 to be low at sleep time; just keep it low always */
-	mask_tpm_reset: mask-tpm-reset {
+	mask_tpm_reset: mask-tpm-reset-pins {
 		samsung,pins = "gpx0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -796,70 +801,70 @@
 		samsung,pin-val = <0>;
 	};
 
-	tpm_irq: tpm-irq {
+	tpm_irq: tpm-irq-pins {
 		samsung,pins = "gpx1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	trackpad_irq: trackpad-irq {
+	trackpad_irq: trackpad-irq-pins {
 		samsung,pins = "gpx1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	power_key_irq: power-key-irq {
+	power_key_irq: power-key-irq-pins {
 		samsung,pins = "gpx1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	ec_irq: ec-irq {
+	ec_irq: ec-irq-pins {
 		samsung,pins = "gpx1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	tps65090_irq: tps65090-irq {
+	tps65090_irq: tps65090-irq-pins {
 		samsung,pins = "gpx2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	dp_hpd_gpio: dp_hpd_gpio {
+	dp_hpd_gpio: dp-hpd-gpio-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	max77802_irq: max77802-irq {
+	max77802_irq: max77802-irq-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	lid_irq: lid-irq {
+	lid_irq: lid-irq-pins {
 		samsung,pins = "gpx3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_dvs_1: pmic-dvs-1 {
+	pmic_dvs_1: pmic-dvs-1-pins {
 		samsung,pins = "gpy7-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -867,74 +872,67 @@
 	};
 };
 
-&pinctrl_1 {
-	/* Adjust WiFi drive strengths lower for EMI */
-	sd1_clk: sd1-clk {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+/* pinctrl_1 */
+/* Adjust WiFi drive strengths lower for EMI */
+&sd1_bus1 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_cmd: sd1-cmd {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_bus4 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_bus8 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_clk {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus8: sd1-bus-width8 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_cmd {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 };
 
 &pinctrl_2 {
-	pmic_dvs_2: pmic-dvs-2 {
-		samsung,pins = "gpj4-2";
+	pmic_dvs_2: pmic-dvs-2-pins {
+		samsung,pins = "gpj4-2", "gpj4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
+};
 
-	pmic_dvs_3: pmic-dvs-3 {
-		samsung,pins = "gpj4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
+/* pinctrl_3*/
+/* Drive SPI lines at x2 for better integrity */
+&spi2_bus {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 };
 
 &pinctrl_3 {
-	/* Drive SPI lines at x2 for better integrity */
-	spi2-bus {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
-
 	/* Drive SPI chip select at x2 for better integrity */
-	ec_spi_cs: ec-spi-cs {
+	ec_spi_cs: ec-spi-cs-pins {
 		samsung,pins = "gpb1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
-	usb300_vbus_en: usb300-vbus-en {
+	usb300_vbus_en: usb300-vbus-en-pins {
 		samsung,pins = "gph0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb301_vbus_en: usb301-vbus-en {
+	usb301_vbus_en: usb301-vbus-en-pins {
 		samsung,pins = "gph0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_selb: pmic-selb {
+	pmic_selb: pmic-selb-pins {
 		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
 			       "gph0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -1089,6 +1087,16 @@
 	vtmu-supply = <&ldo10_reg>;
 };
 
+&usbdrd3_0 {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
 &usbdrd_dwc3_0 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index b82af7c89654..14cf9c4ca0ed 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -9,10 +9,10 @@
  * tree nodes are listed in this file.
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "exynos-pinctrl.h"
 
 &pinctrl_0 {
-	gpy7: gpy7 {
+	gpy7: gpy7-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -20,7 +20,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -31,7 +31,7 @@
 			     <26 0>, <26 1>, <27 0>, <27 1>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -42,7 +42,7 @@
 			     <30 0>, <30 1>, <31 0>, <31 1>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -50,7 +50,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -58,14 +58,14 @@
 		#interrupt-cells = <2>;
 	};
 
-	dp_hpd: dp_hpd {
+	dp_hpd: dp-hpd-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	hdmi_cec: hdmi-cec {
+	hdmi_cec: hdmi-cec-pins {
 		samsung,pins = "gpx3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -74,7 +74,7 @@
 };
 
 &pinctrl_1 {
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -82,7 +82,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -90,7 +90,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc2: gpc2 {
+	gpc2: gpc2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -98,7 +98,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc3: gpc3 {
+	gpc3: gpc3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -106,7 +106,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc4: gpc4 {
+	gpc4: gpc4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -114,7 +114,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -122,175 +122,175 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpy0: gpy0 {
+	gpy0: gpy0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy1: gpy1 {
+	gpy1: gpy1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy2: gpy2 {
+	gpy2: gpy2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy3: gpy3 {
+	gpy3: gpy3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy4: gpy4 {
+	gpy4: gpy4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy5: gpy5 {
+	gpy5: gpy5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy6: gpy6 {
+	gpy6: gpy6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpc0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpc0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpc0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpc0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_rclk: sd0-rclk {
+	sd0_rclk: sd0-rclk-pins {
 		samsung,pins = "gpc0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpc1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpc1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpc1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_int: sd1-int {
+	sd1_int: sd1-int-pins {
 		samsung,pins = "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpc1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_bus8: sd1-bus-width8 {
+	sd1_bus8: sd1-bus-width8-pins {
 		samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpc2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpc2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_wp: sd2-wp {
+	sd2_wp: sd2-wp-pins {
 		samsung,pins = "gpc4-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -299,7 +299,7 @@
 };
 
 &pinctrl_2 {
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -307,7 +307,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -315,7 +315,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -323,7 +323,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -331,7 +331,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -339,7 +339,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -347,7 +347,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -355,7 +355,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj4: gpj4 {
+	gpj4: gpj4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -363,7 +363,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	cam_gpio_a: cam-gpio-a {
+	cam_gpio_a: cam-gpio-a-pins {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			       "gpe1-0", "gpe1-1";
@@ -372,7 +372,7 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_gpio_b: cam-gpio-b {
+	cam_gpio_b: cam-gpio-b-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -380,42 +380,42 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_i2c2_bus: cam-i2c2-bus {
+	cam_i2c2_bus: cam-i2c2-bus-pins {
 		samsung,pins = "gpf0-4", "gpf0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_spi1_bus: cam-spi1-bus {
+	cam_spi1_bus: cam-spi1-bus-pins {
 		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_i2c1_bus: cam-i2c1-bus {
+	cam_i2c1_bus: cam-i2c1-bus-pins {
 		samsung,pins = "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_i2c0_bus: cam-i2c0-bus {
+	cam_i2c0_bus: cam-i2c0-bus-pins {
 		samsung,pins = "gpf0-0", "gpf0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_spi0_bus: cam-spi0-bus {
+	cam_spi0_bus: cam-spi0-bus-pins {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_bayrgb_bus: cam-bayrgb-bus {
+	cam_bayrgb_bus: cam-bayrgb-bus-pins {
 		samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
 			       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
 			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
@@ -428,7 +428,7 @@
 };
 
 &pinctrl_3 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -436,7 +436,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -444,7 +444,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa2: gpa2 {
+	gpa2: gpa2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -452,7 +452,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -460,7 +460,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb1: gpb1 {
+	gpb1: gpb1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -468,7 +468,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb2: gpb2 {
+	gpb2: gpb2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -476,7 +476,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb3: gpb3 {
+	gpb3: gpb3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -484,7 +484,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb4: gpb4 {
+	gpb4: gpb4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -492,7 +492,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph0: gph0 {
+	gph0: gph0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -500,98 +500,98 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c4_hs_bus: i2c4-hs-bus {
+	i2c4_hs_bus: i2c4-hs-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c5_hs_bus: i2c5-hs-bus {
+	i2c5_hs_bus: i2c5-hs-bus-pins {
 		samsung,pins = "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -599,7 +599,7 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -607,7 +607,7 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -615,7 +615,7 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -623,91 +623,91 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	spdif_bus: spdif-bus {
+	spdif_bus: spdif-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c6_hs_bus: i2c6-hs-bus {
+	i2c6_hs_bus: i2c6-hs-bus-pins {
 		samsung,pins = "gpb1-3", "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpb2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpb2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpb2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c7_hs_bus: i2c7-hs-bus {
+	i2c7_hs_bus: i2c7-hs-bus-pins {
 		samsung,pins = "gpb2-2", "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpb3-0", "gpb3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpb3-2", "gpb3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c8_hs_bus: i2c8-hs-bus {
+	i2c8_hs_bus: i2c8-hs-bus-pins {
 		samsung,pins = "gpb3-4", "gpb3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c9_hs_bus: i2c9-hs-bus {
+	i2c9_hs_bus: i2c9-hs-bus-pins {
 		samsung,pins = "gpb3-6", "gpb3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c10_hs_bus: i2c10-hs-bus {
+	i2c10_hs_bus: i2c10-hs-bus-pins {
 		samsung,pins = "gpb4-0", "gpb4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -716,7 +716,7 @@
 };
 
 &pinctrl_4 {
-	gpz: gpz {
+	gpz: gpz-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -724,7 +724,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index d506da9fa661..e299344e427a 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -21,6 +21,11 @@
 		reg = <0x20000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
 		bootargs = "init=/linuxrc";
 		stdout-path = "serial2:115200n8";
@@ -124,6 +129,9 @@
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
+	vdd-supply = <&ldo6_reg>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
 };
 
 &hsi2c_4 {
@@ -132,6 +140,7 @@
 	pmic@66 {
 		compatible = "samsung,s2mps11-pmic";
 		reg = <0x66>;
+		wakeup-source;
 
 		s2mps11_osc: clocks {
 			compatible = "samsung,s2mps11-clk";
@@ -351,6 +360,7 @@
 	status = "okay";
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
@@ -376,7 +386,7 @@
 };
 
 &pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -385,14 +395,14 @@
 };
 
 &pinctrl_2 {
-	usb300_vbus_en: usb300-vbus-en {
+	usb300_vbus_en: usb300-vbus-en-pins {
 		samsung,pins = "gpg0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb301_vbus_en: usb301-vbus-en {
+	usb301_vbus_en: usb301-vbus-en-pins {
 		samsung,pins = "gpg1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -406,6 +416,16 @@
 	clock-names = "rtc", "rtc_src";
 };
 
+&usbdrd3_0 {
+	vdd10-supply = <&ldo11_reg>;
+	vdd33-supply = <&ldo9_reg>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&ldo11_reg>;
+	vdd33-supply = <&ldo9_reg>;
+};
+
 &usbdrd_phy0 {
 	vbus-supply = <&usb300_vbus_reg>;
 };
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index e23e8ffb093f..dd291f1199f2 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -19,9 +19,6 @@
 	compatible = "samsung,exynos5420", "samsung,exynos5";
 
 	aliases {
-		mshc0 = &mmc_0;
-		mshc1 = &mmc_1;
-		mshc2 = &mmc_2;
 		pinctrl0 = &pinctrl_0;
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
@@ -37,12 +34,123 @@
 		spi2 = &spi_2;
 	};
 
+	bus_disp1: bus-disp1 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_disp1_fimd: bus-disp1-fimd {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_fsys2: bus-fsys2 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_fsys_apb: bus-fsys-apb {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_g2d: bus-g2d {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK333_G2D>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_g2d_acp: bus-g2d-acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK266_G2D>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+	bus_gen: bus-gen {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK266>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_gscl_scaler: bus-gscl-scaler {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_jpeg: bus-jpeg {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_jpeg_apb: bus-jpeg-apb {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK166>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK333>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_mscl: bus-mscl {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_noc: bus-noc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK100_NOC>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_peri: bus-peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK66>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_wcore: bus-wcore {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
 	/*
 	 * The 'cpus' node is not present here but instead it is provided
 	 * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
 	 */
 
-	cluster_a15_opp_table: opp-table0 {
+	cluster_a15_opp_table: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -108,7 +216,7 @@
 		};
 	};
 
-	cluster_a7_opp_table: opp-table1 {
+	cluster_a7_opp_table: opp-table-1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -182,7 +290,7 @@
 
 		clock_audss: audss-clock-controller@3810000 {
 			compatible = "samsung,exynos5420-audss-clock";
-			reg = <0x03810000 0x0C>;
+			reg = <0x03810000 0x0c>;
 			#clock-cells = <1>;
 			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
 				 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
@@ -262,37 +370,37 @@
 
 		nocp_mem0_0: nocp@10ca1000 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1000 0x200>;
+			reg = <0x10ca1000 0x200>;
 			status = "disabled";
 		};
 
 		nocp_mem0_1: nocp@10ca1400 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1400 0x200>;
+			reg = <0x10ca1400 0x200>;
 			status = "disabled";
 		};
 
 		nocp_mem1_0: nocp@10ca1800 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1800 0x200>;
+			reg = <0x10ca1800 0x200>;
 			status = "disabled";
 		};
 
 		nocp_mem1_1: nocp@10ca1c00 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1C00 0x200>;
+			reg = <0x10ca1c00 0x200>;
 			status = "disabled";
 		};
 
 		nocp_g3d_0: nocp@11a51000 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x11A51000 0x200>;
+			reg = <0x11a51000 0x200>;
 			status = "disabled";
 		};
 
 		nocp_g3d_1: nocp@11a51400 {
 			compatible = "samsung,exynos5420-nocp";
-			reg = <0x11A51400 0x200>;
+			reg = <0x11a51400 0x200>;
 			status = "disabled";
 		};
 
@@ -302,8 +410,8 @@
 			clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
 			clock-names = "ppmu";
 			events {
-				ppmu_event3_dmc0_0: ppmu-event3-dmc0_0 {
-					event-name = "ppmu-event3-dmc0_0";
+				ppmu_event3_dmc0_0: ppmu-event3-dmc0-0 {
+					event-name = "ppmu-event3-dmc0-0";
 				};
 			};
 		};
@@ -314,8 +422,8 @@
 			clocks = <&clock CLK_PCLK_PPMU_DREX0_1>;
 			clock-names = "ppmu";
 			events {
-				ppmu_event3_dmc0_1: ppmu-event3-dmc0_1 {
-					event-name = "ppmu-event3-dmc0_1";
+				ppmu_event3_dmc0_1: ppmu-event3-dmc0-1 {
+					event-name = "ppmu-event3-dmc0-1";
 				};
 			};
 		};
@@ -326,8 +434,8 @@
 			clocks = <&clock CLK_PCLK_PPMU_DREX1_0>;
 			clock-names = "ppmu";
 			events {
-				ppmu_event3_dmc1_0: ppmu-event3-dmc1_0 {
-					event-name = "ppmu-event3-dmc1_0";
+				ppmu_event3_dmc1_0: ppmu-event3-dmc1-0 {
+					event-name = "ppmu-event3-dmc1-0";
 				};
 			};
 		};
@@ -338,8 +446,8 @@
 			clocks = <&clock CLK_PCLK_PPMU_DREX1_1>;
 			clock-names = "ppmu";
 			events {
-				ppmu_event3_dmc1_1: ppmu-event3-dmc1_1 {
-					event-name = "ppmu-event3-dmc1_1";
+				ppmu_event3_dmc1_1: ppmu-event3-dmc1-1 {
+					event-name = "ppmu-event3-dmc1-1";
 				};
 			};
 		};
@@ -374,14 +482,14 @@
 
 		disp_pd: power-domain@100440c0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440C0 0x20>;
+			reg = <0x100440c0 0x20>;
 			#power-domain-cells = <0>;
 			label = "DISP";
 		};
 
 		mau_pd: power-domain@100440e0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440E0 0x20>;
+			reg = <0x100440e0 0x20>;
 			#power-domain-cells = <0>;
 			label = "MAU";
 		};
@@ -430,60 +538,50 @@
 			power-domains = <&mau_pd>;
 		};
 
-		adma: adma@3880000 {
+		adma: dma-controller@3880000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x03880000 0x1000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_audss EXYNOS_ADMA>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <6>;
-			#dma-requests = <16>;
 			power-domains = <&mau_pd>;
 		};
 
-		pdma0: pdma@121a0000 {
+		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
+			reg = <0x121a0000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@121b0000 {
+		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
+			reg = <0x121b0000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		mdma0: mdma@10800000 {
+		mdma0: dma-controller@10800000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 		};
 
-		mdma1: mdma@11c10000 {
+		mdma1: dma-controller@11c10000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
+			reg = <0x11c10000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 			/*
 			 * MDMA1 can support both secure and non-secure
 			 * AXI transactions. When this is enabled in
@@ -517,7 +615,7 @@
 
 		i2s1: i2s@12d60000 {
 			compatible = "samsung,exynos5420-i2s";
-			reg = <0x12D60000 0x100>;
+			reg = <0x12d60000 0x100>;
 			dmas = <&pdma1 12>,
 				<&pdma1 11>;
 			dma-names = "tx", "rx";
@@ -533,7 +631,7 @@
 
 		i2s2: i2s@12d70000 {
 			compatible = "samsung,exynos5420-i2s";
-			reg = <0x12D70000 0x100>;
+			reg = <0x12d70000 0x100>;
 			dmas = <&pdma0 12>,
 				<&pdma0 11>;
 			dma-names = "tx", "rx";
@@ -595,19 +693,7 @@
 			status = "disabled";
 		};
 
-		dp_phy: dp-video-phy {
-			compatible = "samsung,exynos5420-dp-video-phy";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <0>;
-		};
-
-		mipi_phy: mipi-video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			syscon = <&pmu_system_controller>;
-			#phy-cells = <1>;
-		};
-
-		dsi@14500000 {
+		dsi: dsi@14500000 {
 			compatible = "samsung,exynos5410-mipi-dsi";
 			reg = <0x14500000 0x10000>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -622,7 +708,7 @@
 
 		hsi2c_8: i2c@12e00000 {
 			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E00000 0x1000>;
+			reg = <0x12e00000 0x1000>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -635,7 +721,7 @@
 
 		hsi2c_9: i2c@12e10000 {
 			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E10000 0x1000>;
+			reg = <0x12e10000 0x1000>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -648,7 +734,7 @@
 
 		hsi2c_10: i2c@12e20000 {
 			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E20000 0x1000>;
+			reg = <0x12e20000 0x1000>;
 			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -675,13 +761,13 @@
 			#sound-dai-cells = <0>;
 		};
 
-		hdmiphy: hdmiphy@145d0000 {
-			reg = <0x145D0000 0x20>;
+		hdmiphy: hdmi-phy@145d0000 {
+			reg = <0x145d0000 0x20>;
 		};
 
 		hdmicec: cec@101b0000 {
 			compatible = "samsung,s5p-cec";
-			reg = <0x101B0000 0x200>;
+			reg = <0x101b0000 0x200>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_HDMI_CEC>;
 			clock-names = "hdmicec";
@@ -706,7 +792,7 @@
 
 		rotator: rotator@11c00000 {
 			compatible = "samsung,exynos5250-rotator";
-			reg = <0x11C00000 0x64>;
+			reg = <0x11c00000 0x64>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_ROTATOR>;
 			clock-names = "rotator";
@@ -815,7 +901,7 @@
 
 		jpeg_0: jpeg@11f50000 {
 			compatible = "samsung,exynos5420-jpeg";
-			reg = <0x11F50000 0x1000>;
+			reg = <0x11f50000 0x1000>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "jpeg";
 			clocks = <&clock CLK_JPEG>;
@@ -824,7 +910,7 @@
 
 		jpeg_1: jpeg@11f60000 {
 			compatible = "samsung,exynos5420-jpeg";
-			reg = <0x11F60000 0x1000>;
+			reg = <0x11f60000 0x1000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "jpeg";
 			clocks = <&clock CLK_JPEG2>;
@@ -832,7 +918,7 @@
 		};
 
 		pmu_system_controller: system-controller@10040000 {
-			compatible = "samsung,exynos5420-pmu", "syscon";
+			compatible = "samsung,exynos5420-pmu", "simple-mfd", "syscon";
 			reg = <0x10040000 0x5000>;
 			clock-names = "clkout16";
 			clocks = <&clock CLK_FIN_PLL>;
@@ -840,6 +926,16 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
+
+			dp_phy: dp-phy {
+				compatible = "samsung,exynos5420-dp-video-phy";
+				#phy-cells = <0>;
+			};
+
+			mipi_phy: mipi-phy {
+				compatible = "samsung,exynos5420-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
 		tmu_cpu0: tmu@10060000 {
@@ -889,7 +985,7 @@
 
 		sysmmu_g2dr: sysmmu@10a60000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A60000 0x1000>;
+			reg = <0x10a60000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <24 5>;
 			clock-names = "sysmmu", "master";
@@ -899,7 +995,7 @@
 
 		sysmmu_g2dw: sysmmu@10a70000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A70000 0x1000>;
+			reg = <0x10a70000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <22 2>;
 			clock-names = "sysmmu", "master";
@@ -920,7 +1016,7 @@
 
 		sysmmu_gscl0: sysmmu@13e80000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E80000 0x1000>;
+			reg = <0x13e80000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 0>;
 			clock-names = "sysmmu", "master";
@@ -931,7 +1027,7 @@
 
 		sysmmu_gscl1: sysmmu@13e90000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E90000 0x1000>;
+			reg = <0x13e90000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <2 2>;
 			clock-names = "sysmmu", "master";
@@ -963,7 +1059,7 @@
 
 		sysmmu_scaler2r: sysmmu@128a0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128A0000 0x1000>;
+			reg = <0x128a0000 0x1000>;
 			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
@@ -973,7 +1069,7 @@
 
 		sysmmu_scaler0w: sysmmu@128c0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128C0000 0x1000>;
+			reg = <0x128c0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <27 2>;
 			clock-names = "sysmmu", "master";
@@ -984,7 +1080,7 @@
 
 		sysmmu_scaler1w: sysmmu@128d0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128D0000 0x1000>;
+			reg = <0x128d0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <22 6>;
 			clock-names = "sysmmu", "master";
@@ -995,7 +1091,7 @@
 
 		sysmmu_scaler2w: sysmmu@128e0000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128E0000 0x1000>;
+			reg = <0x128e0000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <19 6>;
 			clock-names = "sysmmu", "master";
@@ -1006,7 +1102,7 @@
 
 		sysmmu_rotator: sysmmu@11d40000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11D40000 0x1000>;
+			reg = <0x11d40000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 0>;
 			clock-names = "sysmmu", "master";
@@ -1016,7 +1112,7 @@
 
 		sysmmu_jpeg0: sysmmu@11f10000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F10000 0x1000>;
+			reg = <0x11f10000 0x1000>;
 			interrupt-parent = <&combiner>;
 			interrupts = <4 2>;
 			clock-names = "sysmmu", "master";
@@ -1026,7 +1122,7 @@
 
 		sysmmu_jpeg1: sysmmu@11f20000 {
 			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F20000 0x1000>;
+			reg = <0x11f20000 0x1000>;
 			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
@@ -1076,118 +1172,6 @@
 			power-domains = <&disp_pd>;
 			#iommu-cells = <0>;
 		};
-
-		bus_wcore: bus-wcore {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_noc: bus-noc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK100_NOC>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_fsys_apb: bus-fsys-apb {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_fsys: bus-fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_fsys2: bus-fsys2 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_mfc: bus-mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK333>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_gen: bus-gen {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK266>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_peri: bus-peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK66>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_g2d: bus-g2d {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK333_G2D>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_g2d_acp: bus-g2d-acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK266_G2D>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_jpeg: bus-jpeg {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_jpeg_apb: bus-jpeg-apb {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK166>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_disp1_fimd: bus-disp1-fimd {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_disp1: bus-disp1 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_gscl_scaler: bus-gscl-scaler {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
-			clock-names = "bus";
-			status = "disabled";
-		};
-
-		bus_mscl: bus-mscl {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
-			clock-names = "bus";
-			status = "disabled";
-		};
 	};
 
 	thermal-zones {
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
index 4b641b9b8179..412a0bb4b988 100644
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -21,6 +21,38 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
 		cpu0: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 6d690b1db099..2f5b8602e020 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -16,7 +16,11 @@
 / {
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x7EA00000>;
+		reg = <0x40000000 0x7ea00000>;
+	};
+
+	aliases {
+		mmc2 = &mmc_2;
 	};
 
 	chosen {
@@ -35,7 +39,7 @@
 		};
 	};
 
-	bus_wcore_opp_table: opp-table2 {
+	bus_wcore_opp_table: opp-table-2 {
 		compatible = "operating-points-v2";
 
 		/* derived from 532MHz MPLL */
@@ -61,7 +65,7 @@
 		};
 	};
 
-	bus_noc_opp_table: opp-table3 {
+	bus_noc_opp_table: opp-table-3 {
 		compatible = "operating-points-v2";
 
 		/* derived from 666MHz CPLL */
@@ -79,7 +83,7 @@
 		};
 	};
 
-	bus_fsys_apb_opp_table: opp-table4 {
+	bus_fsys_apb_opp_table: opp-table-4 {
 		compatible = "operating-points-v2";
 
 		/* derived from 666MHz CPLL */
@@ -91,7 +95,7 @@
 		};
 	};
 
-	bus_fsys2_opp_table: opp-table5 {
+	bus_fsys2_opp_table: opp-table-5 {
 		compatible = "operating-points-v2";
 
 		/* derived from 600MHz DPLL */
@@ -106,7 +110,7 @@
 		};
 	};
 
-	bus_mfc_opp_table: opp-table6 {
+	bus_mfc_opp_table: opp-table-6 {
 		compatible = "operating-points-v2";
 
 		/* derived from 666MHz CPLL */
@@ -127,7 +131,7 @@
 		};
 	};
 
-	bus_gen_opp_table: opp-table7 {
+	bus_gen_opp_table: opp-table-7 {
 		compatible = "operating-points-v2";
 
 		/* derived from 532MHz MPLL */
@@ -145,7 +149,7 @@
 		};
 	};
 
-	bus_peri_opp_table: opp-table8 {
+	bus_peri_opp_table: opp-table-8 {
 		compatible = "operating-points-v2";
 
 		/* derived from 666MHz CPLL */
@@ -154,7 +158,7 @@
 		};
 	};
 
-	bus_g2d_opp_table: opp-table9 {
+	bus_g2d_opp_table: opp-table-9 {
 		compatible = "operating-points-v2";
 
 		/* derived from 666MHz CPLL */
@@ -175,7 +179,7 @@
 		};
 	};
 
-	bus_g2d_acp_opp_table: opp-table10 {
+	bus_g2d_acp_opp_table: opp-table-10 {
 		compatible = "operating-points-v2";
 
 		/* derived from 532MHz MPLL */
@@ -193,7 +197,7 @@
 		};
 	};
 
-	bus_jpeg_opp_table: opp-table11 {
+	bus_jpeg_opp_table: opp-table-11 {
 		compatible = "operating-points-v2";
 
 		/* derived from 600MHz DPLL */
@@ -211,7 +215,7 @@
 		};
 	};
 
-	bus_jpeg_apb_opp_table: opp-table12 {
+	bus_jpeg_apb_opp_table: opp-table-12 {
 		compatible = "operating-points-v2";
 
 		/* derived from 666MHz CPLL */
@@ -229,7 +233,7 @@
 		};
 	};
 
-	bus_disp1_fimd_opp_table: opp-table13 {
+	bus_disp1_fimd_opp_table: opp-table-13 {
 		compatible = "operating-points-v2";
 
 		/* derived from 600MHz DPLL */
@@ -241,7 +245,7 @@
 		};
 	};
 
-	bus_disp1_opp_table: opp-table14 {
+	bus_disp1_opp_table: opp-table-14 {
 		compatible = "operating-points-v2";
 
 		/* derived from 600MHz DPLL */
@@ -256,7 +260,7 @@
 		};
 	};
 
-	bus_gscl_opp_table: opp-table15 {
+	bus_gscl_opp_table: opp-table-15 {
 		compatible = "operating-points-v2";
 
 		/* derived from 600MHz DPLL */
@@ -271,7 +275,7 @@
 		};
 	};
 
-	bus_mscl_opp_table: opp-table16 {
+	bus_mscl_opp_table: opp-table-16 {
 		compatible = "operating-points-v2";
 
 		/* derived from 666MHz CPLL */
@@ -292,7 +296,7 @@
 		};
 	};
 
-	dmc_opp_table: opp-table17 {
+	dmc_opp_table: opp-table-17 {
 		compatible = "operating-points-v2";
 
 		opp00 {
@@ -333,8 +337,6 @@
 		compatible	= "samsung,K3QF2F20DB", "jedec,lpddr3";
 		density		= <16384>;
 		io-width	= <32>;
-		#address-cells	= <1>;
-		#size-cells	= <0>;
 
 		tRFC-min-tck		= <17>;
 		tRRD-min-tck		= <2>;
@@ -358,10 +360,9 @@
 		tCKESR-min-tck		= <2>;
 		tMRD-min-tck		= <5>;
 
-		timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
+		timings_samsung_K3QF2F20DB_800mhz: timings {
 			compatible	= "jedec,lpddr3-timings";
-			/* workaround: 'reg' shows max-freq */
-			reg		= <800000000>;
+			max-freq	= <800000000>;
 			min-freq	= <100000000>;
 			tRFC		= <65000>;
 			tRRD		= <6000>;
@@ -512,6 +513,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s2mps11_irq>;
+		wakeup-source;
 
 		s2mps11_osc: clocks {
 			compatible = "samsung,s2mps11-clk";
@@ -998,7 +1000,7 @@
 };
 
 &pinctrl_0 {
-	s2mps11_irq: s2mps11-irq {
+	s2mps11_irq: s2mps11-irq-pins {
 		samsung,pins = "gpx0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index 20c222b33f98..5e4280393706 100644
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -8,6 +8,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/leds/common.h>
 #include "exynos5422-odroid-core.dtsi"
 
 / {
@@ -19,17 +20,18 @@
 		compatible = "pwm-leds";
 
 		led-1 {
-			label = "blue:heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
+			thermal-sensors = <&tmu_cpu0>;
 			trips {
 				cpu0_alert0: cpu-alert-0 {
 					temperature = <70000>; /* millicelsius */
@@ -84,7 +86,7 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
+			thermal-sensors = <&tmu_cpu1>;
 			trips {
 				cpu1_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -128,7 +130,7 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
+			thermal-sensors = <&tmu_cpu2>;
 			trips {
 				cpu2_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -172,7 +174,7 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
+			thermal-sensors = <&tmu_cpu3>;
 			trips {
 				cpu3_alert0: cpu-alert-0 {
 					temperature = <70000>;
@@ -216,7 +218,7 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
+			thermal-sensors = <&tmu_gpu>;
 			trips {
 				gpu_alert0: gpu-alert-0 {
 					temperature = <70000>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index e35af40a55cb..b4a851aa8881 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -13,6 +13,10 @@
 #include "exynos5422-odroid-core.dtsi"
 
 / {
+	aliases {
+		mmc0 = &mmc_0;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -50,7 +54,7 @@
 
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
+			thermal-sensors = <&tmu_cpu0>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -139,7 +143,7 @@
 			};
 		};
 		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
+			thermal-sensors = <&tmu_cpu1>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -212,7 +216,7 @@
 			};
 		};
 		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
+			thermal-sensors = <&tmu_cpu2>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -285,7 +289,7 @@
 			};
 		};
 		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
+			thermal-sensors = <&tmu_cpu3>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -358,7 +362,7 @@
 			};
 		};
 		gpu_thermal: gpu-thermal {
-			thermal-sensors = <&tmu_gpu 0>;
+			thermal-sensors = <&tmu_gpu>;
 			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
@@ -472,6 +476,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	max-frequency = <200000000>;
@@ -480,14 +485,14 @@
 };
 
 &pinctrl_0 {
-	power_key: power-key {
+	power_key: power-key-pins {
 		samsung,pins = "gpx0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -496,7 +501,7 @@
 };
 
 &pinctrl_1 {
-	emmc_nrst_pin: emmc-nrst {
+	emmc_nrst_pin: emmc-nrst-pins {
 		samsung,pins = "gpd1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index 62c5928aa994..e3154a1cae23 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -113,13 +113,13 @@
 	#size-cells = <0>;
 
 	hub@1 {
-		compatible = "usb0424,9514";
+		compatible = "usb424,9514";
 		reg = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
-			compatible = "usb0424,ec00";
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
 		};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index cecaeb69e623..a378d4937ff7 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -80,13 +80,13 @@
 	#size-cells = <0>;
 
 	hub@1 {
-		compatible = "usb0424,9514";
+		compatible = "usb424,9514";
 		reg = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
-			compatible = "usb0424,ec00";
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
 		};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
index ede782257643..f5fb617f46bd 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -9,6 +9,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos5422-odroidxu3-common.dtsi"
 
@@ -21,10 +22,11 @@
 		compatible = "pwm-leds";
 
 		led-1 {
-			label = "blue:heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
new file mode 100644
index 000000000000..c35261a338ff
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
@@ -0,0 +1,679 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy S5 (SM-G900H) device-tree source
+ *
+ * Copyright (c) 2023 Markuss Broks
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "exynos5800.dtsi"
+#include "exynos5422-cpus.dtsi"
+
+/ {
+	model = "Samsung Galaxy S5 (SM-G900H)";
+	compatible = "samsung,k3g", "samsung,exynos5800", \
+		     "samsung,exynos5";
+
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc_0;
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x80000000>; /* 2 GiB */
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	firmware@2073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	tsp_vdd: regulator-tsp-vdd-en {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_vdd_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpy3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&buck4_reg>;
+};
+
+&hsi2c_7 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps11_irq>;
+
+		s2mps11_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps11_ap",
+					     "s2mps11_cp", "s2mps11_bt";
+		};
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_MEM";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VDD_KFC";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VIN_LLDO";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VIN_MLDO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-always-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VIN_HLDO";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-always-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "VDD_CAM_ISP";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3550000>;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_APIO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDD_APIO_MMC01";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD_ADC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD_HRM_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD_MIPI";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD_MIPI_PLL_ABB1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD_VTF";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD_UOTG";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDDQ_PRE";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_HSIC_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD_HSIC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDD_APIO_MMC2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD_MOTOR";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD_CAM1_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				/* Unused */
+				regulator-name = "VDD_LDO17";
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "VDD_CODEC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VDD_VMMC";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDD_CAM1_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VDD_CAM_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VDD_CAM0_S_CORE";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "VDD_MIFS";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VDD_MHL_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "VDD_LCD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "VDD_CAM0_AF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "VDD_G3DS";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "VDD_LCD_3V0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo29_reg: LDO29 {
+				/* Unused */
+				regulator-name = "VDD_LDO29";
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "VDD_TOUCH";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo31_reg: LDO31 {
+				regulator-name = "VDD_COMP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "VDD_TOUCH_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "VDD_MHL_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "VDD_HRM_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "VDD_SIL";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo36_reg: LDO36 {
+				/* Unused */
+				regulator-name = "VDD_LDO36";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo37_reg: LDO37 {
+				/* Unused */
+				regulator-name = "VDD_LDO37";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo38_reg: LDO38 {
+				regulator-name = "VDD_KEY_LED";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c_0 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		interrupt-parent = <&gpx1>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		vio-supply = <&ldo32_reg>;
+		vdd-supply = <&tsp_vdd>;
+		syna,startup-delay-ms = <100>;
+
+		pinctrl-0 = <&touch_irq>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+/* eMMC flash */
+&mmc_0 {
+	status = "okay";
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+	samsung,read-strobe-delay = <90>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
+	bus-width = <8>;
+};
+
+&pinctrl_0 {
+	s2mps11_irq: s2mps11-irq-pins {
+		samsung,pins = "gpx0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	touch_irq: touch-irq-pins {
+		samsung,pins = "gpx1-6";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&timer {
+	arm,cpu-registers-not-fw-configured;
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
index 2fc3e86dc5f7..8c0e1716c0b3 100644
--- a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
+++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -9,6 +9,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	led-controller-1 {
@@ -16,21 +17,24 @@
 
 		led-1 {
 			label = "green:mmc0";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			color = <LED_COLOR_ID_GREEN>;
 			pwms = <&pwm 1 2000000 0>;
 			pwm-names = "pwm1";
 			/*
 			 * Green LED is much brighter than the others
 			 * so limit its max brightness
 			 */
-			max_brightness = <127>;
+			max-brightness = <127>;
 			linux,default-trigger = "mmc0";
 		};
 
 		led-2 {
-			label = "blue:heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -40,6 +44,8 @@
 
 		led-3 {
 			label = "red:microSD";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			color = <LED_COLOR_ID_RED>;
 			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 			linux,default-trigger = "mmc1";
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 2ddb7a5f12b3..5c799886c275 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -74,7 +74,8 @@
 		};
 
 		mct: timer@101c0000 {
-			compatible = "samsung,exynos4210-mct";
+			compatible = "samsung,exynos5420-mct",
+				     "samsung,exynos4210-mct";
 			reg = <0x101c0000 0xb00>;
 			interrupts-extended = <&combiner 23 3>,
 					      <&combiner 23 4>,
@@ -141,15 +142,15 @@
 			status = "disabled";
 		};
 
-		usbdrd3_0: usb3-0 {
+		usbdrd3_0: usb@12000000 {
 			compatible = "samsung,exynos5250-dwusb3";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x12000000 0x10000>;
 
-			usbdrd_dwc3_0: usb@12000000 {
+			usbdrd_dwc3_0: usb@0 {
 				compatible = "snps,dwc3";
-				reg = <0x12000000 0x10000>;
+				reg = <0x0 0x10000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
 				phy-names = "usb2-phy", "usb3-phy";
@@ -163,15 +164,15 @@
 			#phy-cells = <1>;
 		};
 
-		usbdrd3_1: usb3-1 {
+		usbdrd3_1: usb@12400000 {
 			compatible = "samsung,exynos5250-dwusb3";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x0 0x12400000 0x10000>;
 
-			usbdrd_dwc3_1: usb@12400000 {
+			usbdrd_dwc3_1: usb@0 {
 				compatible = "snps,dwc3";
-				reg = <0x12400000 0x10000>;
+				reg = <0x0 0x10000>;
 				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,dis_u3_susphy_quirk;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 0ce3443d39a8..1f544f12da6c 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -24,10 +24,14 @@
 		"google,pi-rev11", "google,pi-rev10",
 		"google,pi", "google,peach", "samsung,exynos5800",
 		"samsung,exynos5";
+	chassis-type = "laptop";
 
 	aliases {
 		/* Assign 20 so we don't get confused w/ builtin ones */
 		i2c20 = &i2c_tunnel;
+		mmc0 = &mmc_0; /* eMMC */
+		mmc1 = &mmc_2; /* SD */
+		mmc2 = &mmc_1; /* WiFi */
 	};
 
 	backlight: backlight {
@@ -58,7 +62,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&power_key_irq &lid_irq>;
 
-		power {
+		power-key {
 			label = "Power";
 			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -220,7 +224,7 @@
 		interrupts = <1 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
-			    <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+			    <&pmic_dvs_1>, <&pmic_dvs_2>;
 		wakeup-source;
 		reg = <0x9>;
 		#clock-cells = <1>;
@@ -702,6 +706,7 @@
 /* eMMC flash */
 &mmc_0 {
 	status = "okay";
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	cap-mmc-highspeed;
@@ -755,14 +760,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mask_tpm_reset>;
 
-	wifi_en: wifi-en {
+	wifi_en: wifi-en-pins {
 		samsung,pins = "gpx0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	max98091_irq: max98091-irq {
+	max98091_irq: max98091-irq-pins {
 		samsung,pins = "gpx0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -770,7 +775,7 @@
 	};
 
 	/* We need GPX0_6 to be low at sleep time; just keep it low always */
-	mask_tpm_reset: mask-tpm-reset {
+	mask_tpm_reset: mask-tpm-reset-pins {
 		samsung,pins = "gpx0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -778,70 +783,70 @@
 		samsung,pin-val = <0>;
 	};
 
-	tpm_irq: tpm-irq {
+	tpm_irq: tpm-irq-pins {
 		samsung,pins = "gpx1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	trackpad_irq: trackpad-irq {
+	trackpad_irq: trackpad-irq-pins {
 		samsung,pins = "gpx1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	power_key_irq: power-key-irq {
+	power_key_irq: power-key-irq-pins {
 		samsung,pins = "gpx1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	ec_irq: ec-irq {
+	ec_irq: ec-irq-pins {
 		samsung,pins = "gpx1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	tps65090_irq: tps65090-irq {
+	tps65090_irq: tps65090-irq-pins {
 		samsung,pins = "gpx2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	dp_hpd_gpio: dp_hpd_gpio {
+	dp_hpd_gpio: dp-hpd-gpio-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	max77802_irq: max77802-irq {
+	max77802_irq: max77802-irq-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	lid_irq: lid-irq {
+	lid_irq: lid-irq-pins {
 		samsung,pins = "gpx3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_dvs_1: pmic-dvs-1 {
+	pmic_dvs_1: pmic-dvs-1-pins {
 		samsung,pins = "gpy7-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -849,74 +854,67 @@
 	};
 };
 
-&pinctrl_1 {
-	/* Adjust WiFi drive strengths lower for EMI */
-	sd1_clk: sd1-clk {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+/* pinctrl_1 */
+/* Adjust WiFi drive strengths lower for EMI */
+&sd1_bus1 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_cmd: sd1-cmd {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_bus4 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_bus8 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_clk {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus8: sd1-bus-width8 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_cmd {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 };
 
 &pinctrl_2 {
-	pmic_dvs_2: pmic-dvs-2 {
-		samsung,pins = "gpj4-2";
+	pmic_dvs_2: pmic-dvs-2-pins {
+		samsung,pins = "gpj4-2", "gpj4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
+};
 
-	pmic_dvs_3: pmic-dvs-3 {
-		samsung,pins = "gpj4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
+/* pinctrl_3*/
+/* Drive SPI lines at x2 for better integrity */
+&spi2_bus {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 };
 
 &pinctrl_3 {
-	/* Drive SPI lines at x2 for better integrity */
-	spi2-bus {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
-
 	/* Drive SPI chip select at x2 for better integrity */
-	ec_spi_cs: ec-spi-cs {
+	ec_spi_cs: ec-spi-cs-pins {
 		samsung,pins = "gpb1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
-	usb300_vbus_en: usb300-vbus-en {
+	usb300_vbus_en: usb300-vbus-en-pins {
 		samsung,pins = "gph0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb301_vbus_en: usb301-vbus-en {
+	usb301_vbus_en: usb301-vbus-en-pins {
 		samsung,pins = "gph0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_selb: pmic-selb {
+	pmic_selb: pmic-selb-pins {
 		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
 			       "gph0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -1071,6 +1069,16 @@
 	vtmu-supply = <&ldo10_reg>;
 };
 
+&usbdrd3_0 {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
 &usbdrd_dwc3_0 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi
index 526729dad53f..8328ddb3b02f 100644
--- a/arch/arm/boot/dts/exynos5800.dtsi
+++ b/arch/arm/boot/dts/exynos5800.dtsi
@@ -148,6 +148,10 @@
 	};
 };
 
+&dsi {
+	compatible = "samsung,exynos5422-mipi-dsi";
+};
+
 &mfc {
 	compatible = "samsung,mfc-v8";
 };
diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi b/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi
new file mode 100644
index 000000000000..7f3652dea550
--- /dev/null
+++ b/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/*
+	 * u-boot partition: 896KB.
+	 */
+	u-boot@0 {
+		reg = <0x0 0xe0000>;
+		label = "u-boot";
+	};
+
+	/*
+	 * u-boot environment variables: 64KB.
+	 */
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x10000>;
+		label = "env";
+	};
+
+	/*
+	 * image metadata partition (64KB), used by Facebook internal
+	 * tools.
+	 */
+	image-meta@f0000 {
+		reg = <0xf0000 0x10000>;
+		label = "meta";
+	};
+
+	/*
+	 * FIT image: 119 MB.
+	 */
+	fit@100000 {
+		reg = <0x100000 0x7700000>;
+		label = "fit";
+	};
+
+	/*
+	 * "data0" partition (8MB) is used by Facebook BMC platforms as
+	 * persistent data store.
+	 */
+	data0@7800000 {
+		reg = <0x7800000 0x800000>;
+		label = "data0";
+	};
+
+	/*
+	 * Although the master partition can be created by enabling
+	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+	 * explicitly created to avoid breaking legacy applications.
+	 */
+	flash0@0 {
+		reg = <0x0 0x8000000>;
+		label = "flash0";
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
index cc39289e99dd..396149664297 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -61,9 +61,9 @@
 		#size-cells = <0>;
 
 		/* Collides with IDE pins, that's cool (we do not use them) */
-		gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 
@@ -169,7 +169,7 @@
 	 * The touchpad input is connected to a GPIO bit-banged
 	 * I2C bus.
 	 */
-	gpio-i2c {
+	i2c {
 		compatible = "i2c-gpio";
 		/* Collides with ICE */
 		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
@@ -439,24 +439,6 @@
 
 		pci@50000000 {
 			status = "okay";
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
 		};
 
 		ethernet@60000000 {
@@ -492,8 +474,7 @@
 		display-controller@6a000000 {
 			status = "okay";
 
-			port@0 {
-				reg = <0>;
+			port {
 				display_out: endpoint {
 					remote-endpoint = <&panel_in>;
 				};
diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index c6f3d90e3e90..138c47e1ac1b 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -80,9 +80,18 @@
 		#cooling-cells = <2>;
 	};
 
+	/*
+	 * This is the type B USB connector on the device,
+	 * a GPIO-controlled USB VBUS detect
+	 */
+	usb1_phy: phy {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		#phy-cells = <0>;
+		vbus-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+	};
 
 	/* Global Mixed-Mode Technology G751 mounted on GPIO I2C */
-	gpio-i2c {
+	i2c {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
@@ -140,7 +149,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		/* Uses MDC and MDIO */
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
@@ -164,6 +173,8 @@
 			compatible = "cortina,gemini-flash", "jedec-flash";
 			status = "okay";
 			reg = <0x30000000 0x00080000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
 			/*
 			 * This "RedBoot" is the Storlink derivative.
@@ -300,5 +311,13 @@
 		ide@63000000 {
 			status = "okay";
 		};
+
+		usb@69000000 {
+			status = "okay";
+			dr_mode = "peripheral";
+			usb-phy = <&usb1_phy>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_default_pins>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
index 43c45f7e1e0a..6544c730340f 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -62,7 +62,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
@@ -84,7 +84,7 @@
 			partitions {
 				compatible = "redboot-fis";
 				/* Eraseblock at 0xfe0000 */
-				fis-index-block = <0x1fc>;
+				fis-index-block = <0x7f>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini-ns2502.dts
new file mode 100644
index 000000000000..e6eeb35e8819
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-ns2502.dts
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for Edimax NS 2502
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "Edimax NS-2502";
+	compatible = "edimax,ns-2502", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii-id";
+		phy-handle = <&phy0>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 8MB of flash */
+	reg = <0x30000000 0x00800000>;
+
+	pinctrl-names = "enabled", "disabled";
+	pinctrl-0 = <&pflash_default_pins>;
+	pinctrl-1 = <&pflash_disabled_pins>;
+
+	partitions {
+		compatible = "redboot-fis";
+		/* Eraseblock at 0x7e0000 */
+		fis-index-block = <0x3f>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <3>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			    mux {
+				    function = "gpio0";
+				    groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp";
+			    };
+		};
+		pflash_disabled_pins: pinctrl-pflash-disabled {
+			mux {
+				function = "gpio0";
+				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+					 "gpio0kgrp";
+			};
+		};
+		pinctrl-gmii {
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp";
+				};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts
index 9611ddf06792..0ebda4efd9d0 100644
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -56,7 +56,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
@@ -125,18 +125,6 @@
 			};
 		};
 
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				/* Not used in this platform */
-			};
-		};
-
 		usb@68000000 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts
index a0916d3c1059..91c19e8ebfe8 100644
--- a/arch/arm/boot/dts/gemini-sl93512r.dts
+++ b/arch/arm/boot/dts/gemini-sl93512r.dts
@@ -87,9 +87,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		/* Check pin collisions */
-		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
@@ -256,24 +256,6 @@
 
 		pci@50000000 {
 			status = "okay";
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
 		};
 
 		ethernet@60000000 {
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
index 0c6e6d35bfaa..d0efd76695da 100644
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini-sq201.dts
@@ -72,9 +72,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		/* Check pin collisions */
-		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
@@ -252,24 +252,6 @@
 
 		pci@50000000 {
 			status = "okay";
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
 		};
 
 		ethernet@60000000 {
diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini-ssi1328.dts
new file mode 100644
index 000000000000..42e85f07cf76
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-ssi1328.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for SSI 1328
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "SSI 1328";
+	compatible = "ssi,1328", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* LAN Marvell 88E1118 */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+		/* WAN ICPlus IP101A */
+		phy1: ethernet-phy@2 {
+			reg = <2>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy0>;
+	};
+	ethernet-port@1 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy1>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 32MB of flash */
+	reg = <0x30000000 0x03200000>;
+
+	pinctrl-names = "enabled", "disabled";
+	pinctrl-0 = <&pflash_default_pins>;
+	pinctrl-1 = <&pflash_disabled_pins>;
+
+	partitions {
+		compatible = "redboot-fis";
+		/* Eraseblock at 0xfe0000 */
+		fis-index-block = <0x7F>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <0>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			mux {
+				function = "gpio0";
+				groups = "gpio0agrp", "gpio0bgrp";
+			};
+		};
+		pflash_disabled_pins: pinctrl-pflash-disabled {
+			mux {
+				function = "gpio0";
+				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+					 "gpio0kgrp";
+			};
+		};
+		pinctrl-gmii {
+			/* This platform use both the ethernet ports */
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
index 3a2761dd460f..3c88c59ab481 100644
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
@@ -68,7 +68,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
@@ -87,33 +87,10 @@
 			/* 8MB of flash */
 			reg = <0x30000000 0x00800000>;
 
-			partition@0 {
-				label = "RedBoot";
-				reg = <0x00000000 0x00020000>;
-				read-only;
-			};
-			partition@20000 {
-				label = "kernel";
-				reg = <0x00020000 0x00100000>;
-			};
-			partition@120000 {
-				label = "rootfs";
-				reg = <0x00120000 0x006a0000>;
-			};
-			partition@7c0000 {
-				label = "VCTL";
-				reg = <0x007c0000 0x00010000>;
-				read-only;
-			};
-			partition@7d0000 {
-				label = "cfg";
-				reg = <0x007d0000 0x00010000>;
-				read-only;
-			};
-			partition@7e0000 {
-				label = "FIS";
-				reg = <0x007e0000 0x00010000>;
-				read-only;
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0x7e0000 */
+				fis-index-block = <0x3f>;
 			};
 		};
 
@@ -140,24 +117,6 @@
 
 		pci@50000000 {
 			status = "okay";
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
 		};
 
 		ethernet@60000000 {
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
index 52b4dbc0c072..ff72bbc4db3e 100644
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
@@ -67,7 +67,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
@@ -91,33 +91,10 @@
 			/* 8MB of flash */
 			reg = <0x30000000 0x00800000>;
 
-			partition@0 {
-				label = "RedBoot";
-				reg = <0x00000000 0x00020000>;
-				read-only;
-			};
-			partition@20000 {
-				label = "kernel";
-				reg = <0x00020000 0x00100000>;
-			};
-			partition@120000 {
-				label = "rootfs";
-				reg = <0x00120000 0x006a0000>;
-			};
-			partition@7c0000 {
-				label = "VCTL";
-				reg = <0x007c0000 0x00010000>;
-				read-only;
-			};
-			partition@7d0000 {
-				label = "cfg";
-				reg = <0x007d0000 0x00010000>;
-				read-only;
-			};
-			partition@7e0000 {
-				label = "FIS";
-				reg = <0x007e0000 0x00010000>;
-				read-only;
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0x7e0000 */
+				fis-index-block = <0x3f>;
 			};
 		};
 
@@ -151,24 +128,6 @@
 
 		pci@50000000 {
 			status = "okay";
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
 		};
 
 		ethernet@60000000 {
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index 065ed10a79fa..befe322bd7de 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -16,14 +16,12 @@
 		compatible = "simple-bus";
 		interrupt-parent = <&intcon>;
 
-		flash@30000000 {
+		flash: flash@30000000 {
 			compatible = "cortina,gemini-flash", "cfi-flash";
 			syscon = <&syscon>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pflash_default_pins>;
 			bank-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
 			status = "disabled";
 		};
 
@@ -191,7 +189,7 @@
 		};
 
 		rtc@45000000 {
-			compatible = "cortina,gemini-rtc";
+			compatible = "cortina,gemini-rtc", "faraday,ftrtc010";
 			reg = <0x45000000 0x100>;
 			interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&syscon GEMINI_RESET_RTC>;
@@ -286,11 +284,31 @@
 			clock-names = "PCLK", "PCICLK";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pci_default_pins>;
+			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 			status = "disabled";
 
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+				<0x4800 0 0 2 &pci_intc 1>,
+				<0x4800 0 0 3 &pci_intc 2>,
+				<0x4800 0 0 4 &pci_intc 3>,
+				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+				<0x5000 0 0 2 &pci_intc 2>,
+				<0x5000 0 0 3 &pci_intc 3>,
+				<0x5000 0 0 4 &pci_intc 0>,
+				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+				<0x5800 0 0 2 &pci_intc 3>,
+				<0x5800 0 0 3 &pci_intc 0>,
+				<0x5800 0 0 4 &pci_intc 1>,
+				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+				<0x6000 0 0 2 &pci_intc 0>,
+				<0x6000 0 0 3 &pci_intc 1>,
+				<0x6000 0 0 4 &pci_intc 2>;
+
 			bus-range = <0x00 0xff>;
 			/* PCI ranges mappings */
 			ranges =
@@ -321,7 +339,7 @@
 			};
 		};
 
-		ethernet@60000000 {
+		ethernet: ethernet@60000000 {
 			compatible = "cortina,gemini-ethernet";
 			reg = <0x60000000 0x4000>, /* Global registers, queue */
 			      <0x60004000 0x2000>, /* V-bit */
@@ -356,7 +374,15 @@
 			};
 		};
 
-		ide@63000000 {
+		crypto: crypto@62000000 {
+			compatible = "cortina,sl3516-crypto";
+			reg = <0x62000000 0x10000>;
+			interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_SECURITY>;
+			clocks = <&syscon GEMINI_CLK_GATE_SECURITY>;
+		};
+
+		ide0: ide@63000000 {
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
 			reg = <0x63000000 0x1000>;
 			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
@@ -369,7 +395,7 @@
 			#size-cells = <0>;
 		};
 
-		ide@63400000 {
+		ide1: ide@63400000 {
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
 			reg = <0x63400000 0x1000>;
 			interrupts = <5 IRQ_TYPE_EDGE_RISING>;
@@ -409,13 +435,11 @@
 			clock-names = "PCLK", "TVE";
 			pinctrl-names = "default";
 			pinctrl-0 = <&tvc_default_pins>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
-		usb@68000000 {
-			compatible = "cortina,gemini-usb", "faraday,fotg210";
+		usb0: usb@68000000 {
+			compatible = "cortina,gemini-usb", "faraday,fotg200";
 			reg = <0x68000000 0x1000>;
 			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&syscon GEMINI_RESET_USB0>;
@@ -431,12 +455,14 @@
 			 */
 			pinctrl-names = "default";
 			pinctrl-0 = <&usb_default_pins>;
+			/* Default to host mode */
+			dr_mode = "host";
 			syscon = <&syscon>;
 			status = "disabled";
 		};
 
-		usb@69000000 {
-			compatible = "cortina,gemini-usb", "faraday,fotg210";
+		usb1: usb@69000000 {
+			compatible = "cortina,gemini-usb", "faraday,fotg200";
 			reg = <0x69000000 0x1000>;
 			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&syscon GEMINI_RESET_USB1>;
diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts
index ce356c469e1e..d7f5daecc9dc 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hi3620-hi4511.dts
@@ -24,42 +24,42 @@
 
 	amba-bus {
 		dual_timer0: dual_timer@800000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		uart0: serial@b00000 {	/* console */
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
 			pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
 		uart1: serial@b01000 { /* modem */
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
 			pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
 		uart2: serial@b02000 { /* audience */
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
 			pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
 		uart3: serial@b03000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
 			pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
 		uart4: serial@b04000 {
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
 			pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
-			status = "ok";
+			status = "okay";
 		};
 
 		pmx0: pinmux@803000 {
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
index 905900bf3e82..cf48ec14af43 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Hisilicon Ltd. Hi3620 SoC
+ * HiSilicon Ltd. Hi3620 SoC
  *
- * Copyright (C) 2012-2013 Hisilicon Ltd.
+ * Copyright (C) 2012-2013 HiSilicon Ltd.
  * Copyright (C) 2012-2013 Linaro Ltd.
  *
  * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
diff --git a/arch/arm/boot/dts/hip01-ca9x2.dts b/arch/arm/boot/dts/hip01-ca9x2.dts
index 031476304d94..f3faf247cd61 100644
--- a/arch/arm/boot/dts/hip01-ca9x2.dts
+++ b/arch/arm/boot/dts/hip01-ca9x2.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Hisilicon Ltd. HiP01 SoC
+ * HiSilicon Ltd. HiP01 SoC
  *
- * Copyright (C) 2014 Hisilicon Ltd.
+ * Copyright (C) 2014 HiSilicon Ltd.
  * Copyright (C) 2014 Huawei Ltd.
  *
  * Author: Wang Long <long.wanglong@huawei.com>
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
index 2a7963605390..e17f36bd9006 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hip01.dtsi
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Hisilicon Ltd. HiP01 SoC
+ * HiSilicon Ltd. HiP01 SoC
  *
- * Copyright (c) 2014 Hisilicon Ltd.
+ * Copyright (c) 2014 HiSilicon Ltd.
  * Copyright (c) 2014 Huawei Ltd.
  *
  * Author: Wang Long <long.wanglong@huawei.com>
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
index f5691dbc26d2..0210064bf6a5 100644
--- a/arch/arm/boot/dts/hip04-d01.dts
+++ b/arch/arm/boot/dts/hip04-d01.dts
@@ -23,7 +23,7 @@
 
 	soc {
 		uart0: serial@4007000 {
-			status = "ok";
+			status = "okay";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index bccf5ba3d855..2424cc545c9c 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Hisilicon Ltd. HiP04 SoC
+ * HiSilicon Ltd. HiP04 SoC
  *
- * Copyright (C) 2013-2014 Hisilicon Ltd.
+ * Copyright (C) 2013-2014 HiSilicon Ltd.
  * Copyright (C) 2013-2014 Linaro Ltd.
  *
  * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
index 22b122d3f514..7758c19038f0 100644
--- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
+++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 Hisilicon Limited.
+ * Copyright (c) 2013-2014 HiSilicon Limited.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index 97211385dc89..dc991ba2a9fb 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 Hisilicon Limited.
+ * Copyright (c) 2013-2014 HiSilicon Limited.
  */
 
 #include <dt-bindings/clock/hix5hd2-clock.h>
diff --git a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
new file mode 100644
index 000000000000..3a7382ce40ef
--- /dev/null
+++ b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE DL360Gen10
+ */
+
+/include/ "hpe-gxp.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "hpe,gxp-dl360gen10", "hpe,gxp";
+	model = "Hewlett Packard Enterprise ProLiant dl360 Gen10";
+
+	aliases {
+		serial0 = &uartc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe-gxp.dtsi
new file mode 100644
index 000000000000..cf735b3c4f35
--- /dev/null
+++ b/arch/arm/boot/dts/hpe-gxp.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE GXP
+ */
+
+/dts-v1/;
+/ {
+	model = "Hewlett Packard Enterprise GXP BMC";
+	compatible = "hpe,gxp";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+		};
+	};
+
+	clocks {
+		pll: clock-0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1600000000>;
+		};
+
+		iopclk: clock-1 {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		dma-ranges;
+
+		L2: cache-controller@b0040000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xb0040000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		ahb@c0000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc0000000 0x30000000>;
+			dma-ranges;
+
+			vic0: interrupt-controller@eff0000 {
+				compatible = "arm,pl192-vic";
+				reg = <0xeff0000 0x1000>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			vic1: interrupt-controller@80f00000 {
+				compatible = "arm,pl192-vic";
+				reg = <0x80f00000 0x1000>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			uarta: serial@e0 {
+				compatible = "ns16550a";
+				reg = <0xe0 0x8>;
+				interrupts = <17>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			uartb: serial@e8 {
+				compatible = "ns16550a";
+				reg = <0xe8 0x8>;
+				interrupts = <18>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			uartc: serial@f0 {
+				compatible = "ns16550a";
+				reg = <0xf0 0x8>;
+				interrupts = <19>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			usb0: usb@efe0000 {
+				compatible = "hpe,gxp-ehci", "generic-ehci";
+				reg = <0xefe0000 0x100>;
+				interrupts = <7>;
+				interrupt-parent = <&vic0>;
+			};
+
+			st: timer@80 {
+				compatible = "hpe,gxp-timer";
+				reg = <0x80 0x16>;
+				interrupts = <0>;
+				interrupt-parent = <&vic0>;
+				clocks = <&iopclk>;
+				clock-names = "iop";
+			};
+
+			usb1: usb@efe0100 {
+				compatible = "hpe,gxp-ohci", "generic-ohci";
+				reg = <0xefe0100 0x110>;
+				interrupts = <6>;
+				interrupt-parent = <&vic0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx1-pinfunc.h b/arch/arm/boot/dts/imx1-pinfunc.h
index 050a1fc46a77..bd2e679cb26c 100644
--- a/arch/arm/boot/dts/imx1-pinfunc.h
+++ b/arch/arm/boot/dts/imx1-pinfunc.h
@@ -26,9 +26,9 @@
  *                2 - 0
  *                3 - 1
  *
- * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32 configurable
- * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
- * number on the specific port (between 0 and 31).
+ * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is
+ * the pin number on the specific port (between 0 and 31).
  */
 
 #define MX1_PAD_A24__A24			0x00 0x004
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi
index 9b940987864c..e312f1e74e2f 100644
--- a/arch/arm/boot/dts/imx1.dtsi
+++ b/arch/arm/boot/dts/imx1.dtsi
@@ -55,7 +55,7 @@
 
 	clocks {
 		clk32 {
-			compatible = "fsl,imx-clk32", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32000>;
 		};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 8cbaf1c81174..3b609d987d88 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -79,7 +79,6 @@
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
diff --git a/arch/arm/boot/dts/imx23-pinfunc.h b/arch/arm/boot/dts/imx23-pinfunc.h
index 5c0f32ca3a93..468c079f3c2b 100644
--- a/arch/arm/boot/dts/imx23-pinfunc.h
+++ b/arch/arm/boot/dts/imx23-pinfunc.h
@@ -1,14 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Header providing constants for i.MX23 pinctrl bindings.
  *
  * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #ifndef __DT_BINDINGS_MX23_PINCTRL_H__
diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts
index a6213c590f94..b1d8210f3ecc 100644
--- a/arch/arm/boot/dts/imx23-xfi3.dts
+++ b/arch/arm/boot/dts/imx23-xfi3.dts
@@ -158,19 +158,19 @@
 		default-brightness-level = <6>;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_a>;
 
-		voldown {
+		key-voldown {
 			label = "volume-down";
 			linux,code = <114>;
 			gpios = <&gpio2 7 0>;
 			debounce-interval = <20>;
 		};
 
-		volup {
+		key-volup {
 			label = "volume-up";
 			linux,code = <115>;
 			gpios = <&gpio2 8 0>;
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 7f4c602454a5..d19508c8f9ed 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -64,8 +64,6 @@
 				reg = <0x80004000 0x2000>;
 				interrupts = <0 14 20 0
 					      13 13 13 13>;
-				interrupt-names = "empty", "ssp0", "ssp1", "empty",
-						  "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 				#dma-cells = <1>;
 				dma-channels = <8>;
 				clocks = <&clks 15>;
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
index 3f38c2e60a74..c7207ea437c4 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -13,12 +13,12 @@
 	model = "Eukrea MBIMXSD25";
 	compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 
-		bp1 {
+		button {
 			label = "BP1";
 			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index f984b702efc5..908caf810351 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -563,15 +563,15 @@
 #define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x00 0x000
 #define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x05 0x000
 
-#define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x00 0x000
+#define MX25_PAD_GPIO_A__GPIO_1_0		0x1f4 0x3f0 0x000 0x00 0x000
 #define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x06 0x000
 #define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x02 0x000
 
-#define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x00 0x000
+#define MX25_PAD_GPIO_B__GPIO_1_1		0x1f8 0x3f4 0x000 0x00 0x000
 #define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x02 0x001
 #define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x06 0x001
 
-#define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x00 0x000
+#define MX25_PAD_GPIO_C__GPIO_1_2		0x1fc 0x3f8 0x000 0x00 0x000
 #define MX25_PAD_GPIO_C__PWM4_PWMO		0x1fc 0x3f8 0x000 0x01 0x000
 #define MX25_PAD_GPIO_C__I2C2_SCL		0x1fc 0x3f8 0x51c 0x02 0x001
 #define MX25_PAD_GPIO_C__KPP_COL4		0x1fc 0x3f8 0x52c 0x03 0x001
@@ -580,18 +580,18 @@
 #define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x06 0x000
 #define MX25_PAD_GPIO_C__CSPI2_SS2		0x1fc 0x3f8 0x000 0x07 0x000
 
-#define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x00 0x000
+#define MX25_PAD_GPIO_D__GPIO_1_3		0x200 0x3fc 0x000 0x00 0x000
 #define MX25_PAD_GPIO_D__I2C2_SDA		0x200 0x3fc 0x520 0x02 0x001
 #define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x06 0x001
 #define MX25_PAD_GPIO_D__CSPI3_SS2		0x200 0x3fc 0x4c4 0x07 0x001
 
-#define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x00 0x000
+#define MX25_PAD_GPIO_E__GPIO_1_4		0x204 0x400 0x000 0x00 0x000
 #define MX25_PAD_GPIO_E__I2C3_CLK		0x204 0x400 0x524 0x01 0x002
 #define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x02 0x000
 #define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x04 0x000
 #define MX25_PAD_GPIO_E__UART4_RXD		0x204 0x400 0x570 0x06 0x002
 
-#define MX25_PAD_GPIO_F__GPIO_F			0x208 0x404 0x000 0x00 0x000
+#define MX25_PAD_GPIO_F__GPIO_1_5		0x208 0x404 0x000 0x00 0x000
 #define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x02 0x000
 #define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x04 0x000
 #define MX25_PAD_GPIO_F__UART4_TXD		0x208 0x404 0x000 0x06 0x000
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index fdcca82c9986..5f90d72b840b 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -62,13 +62,13 @@
 
 	clocks {
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -200,7 +200,7 @@
 			};
 		};
 
-		spba@50000000 {
+		spba-bus@50000000 {
 			compatible = "fsl,spba-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -515,7 +515,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			sdma: sdma@53fd4000 {
+			sdma: dma-controller@53fd4000 {
 				compatible = "fsl,imx25-sdma";
 				reg = <0x53fd4000 0x4000>;
 				clocks = <&clks 112>, <&clks 68>;
diff --git a/arch/arm/boot/dts/imx27-pinfunc.h b/arch/arm/boot/dts/imx27-pinfunc.h
index 1514d80a3112..75aea0c701d4 100644
--- a/arch/arm/boot/dts/imx27-pinfunc.h
+++ b/arch/arm/boot/dts/imx27-pinfunc.h
@@ -26,9 +26,9 @@
  *                2 - 0
  *                3 - 1
  *
- * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
- * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
- * number on the specific port (between 0 and 31).
+ * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is
+ * the pin number on the specific port (between 0 and 31).
  */
 
 #define MX27_PAD_USBH2_CLK__USBH2_CLK                      0x00 0x000
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index fd525c3b16fa..e140307be2e7 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -74,14 +74,14 @@
 		};
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&aitc>;
 		ranges;
 
-		aipi@10000000 { /* AIPI1 */
+		aipi1: aipi@10000000 { /* AIPI1 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -96,7 +96,7 @@
 					 <&clks IMX27_CLK_DMA_AHB_GATE>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <1>;
-				#dma-channels = <16>;
+				dma-channels = <16>;
 			};
 
 			wdog: watchdog@10002000 {
@@ -453,7 +453,7 @@
 			};
 		};
 
-		aipi@10020000 { /* AIPI2 */
+		aipi2: aipi@10020000 { /* AIPI2 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
index 14a92fe59770..98672932e41b 100644
--- a/arch/arm/boot/dts/imx28-apf28.dts
+++ b/arch/arm/boot/dts/imx28-apf28.dts
@@ -14,67 +14,59 @@
 		device_type = "memory";
 		reg = <0x40000000 0x08000000>;
 	};
+};
 
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x300000>;
-				};
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
 
-				partition@300000 {
-					label = "env";
-					reg = <0x300000 0x80000>;
-				};
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
 
-				partition@380000 {
-					label = "env2";
-					reg = <0x380000 0x80000>;
-				};
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x300000>;
+	};
 
-				partition@400000 {
-					label = "dtb";
-					reg = <0x400000 0x80000>;
-				};
+	partition@300000 {
+		label = "env";
+		reg = <0x300000 0x80000>;
+	};
 
-				partition@480000 {
-					label = "splash";
-					reg = <0x480000 0x80000>;
-				};
+	partition@380000 {
+		label = "env2";
+		reg = <0x380000 0x80000>;
+	};
 
-				partition@500000 {
-					label = "kernel";
-					reg = <0x500000 0x800000>;
-				};
+	partition@400000 {
+		label = "dtb";
+		reg = <0x400000 0x80000>;
+	};
 
-				partition@d00000 {
-					label = "rootfs";
-					reg = <0xd00000 0xf300000>;
-				};
-			};
-		};
+	partition@480000 {
+		label = "splash";
+		reg = <0x480000 0x80000>;
+	};
 
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
+	partition@500000 {
+		label = "kernel";
+		reg = <0x500000 0x800000>;
 	};
 
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
+	partition@d00000 {
+		label = "rootfs";
+		reg = <0xd00000 0xf300000>;
 	};
 };
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index 1b253b47006c..4704b6141836 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -10,166 +10,6 @@
 	model = "Armadeus Systems APF28Dev docking/development board";
 	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_apf28dev>;
-
-				hog_pins_apf28dev: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D16__GPIO_1_16
-						MX28_PAD_LCD_D17__GPIO_1_17
-						MX28_PAD_LCD_D18__GPIO_1_18
-						MX28_PAD_LCD_D19__GPIO_1_19
-						MX28_PAD_LCD_D20__GPIO_1_20
-						MX28_PAD_LCD_D21__GPIO_1_21
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_apf28dev: otg-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_16bit_pins_a
-						&lcdif_pins_apf28dev>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <16>;
-					bus-width = <16>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33000033>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <96>;
-							hfront-porch = <96>;
-							vback-porch = <20>;
-							vfront-porch = <21>;
-							hsync-len = <64>;
-							vsync-len = <4>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can0_vcc>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				uart-has-rtscts;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_apf28dev
-					&usb0_id_pins_b>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -223,3 +63,155 @@
 		};
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can0_vcc>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_16bit_pins_a
+		     &lcdif_pins_apf28dev>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <16>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_apf28dev>;
+
+	hog_pins_apf28dev: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D16__GPIO_1_16
+			MX28_PAD_LCD_D17__GPIO_1_17
+			MX28_PAD_LCD_D18__GPIO_1_18
+			MX28_PAD_LCD_D19__GPIO_1_19
+			MX28_PAD_LCD_D20__GPIO_1_20
+			MX28_PAD_LCD_D21__GPIO_1_21
+			MX28_PAD_LCD_D22__GPIO_1_22
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_apf28dev: lcdif-apf28dev@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	usb0_otg_apf28dev: otg-apf28dev@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_otg_apf28dev
+		     &usb0_id_pins_b>;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index b86be320496b..f9bf40d96568 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -11,200 +11,6 @@
 		reg = <0x40000000 0x04000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_RDY1__GPIO_0_21
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_JTAG_RTCK__GPIO_4_20
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apx4: lcdif-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA4__SSP2_D0
-						MX28_PAD_SSP0_DATA5__SSP2_D3
-						MX28_PAD_SSP0_DATA6__SSP2_CMD
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-						MX28_PAD_SSP2_SS1__SSP2_D1
-						MX28_PAD_SSP2_SS2__SSP2_D2
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_apx4>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <88>;
-							hfront-porch = <40>;
-							vback-porch = <32>;
-							vfront-porch = <13>;
-							hsync-len = <48>;
-							vsync-len = <3>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					#sound-dai-cells = <0>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				pcf8563: rtc@51 {
-					compatible = "phg,pcf8563";
-					reg = <0x51>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_2pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&usb1_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-		      status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -238,3 +44,189 @@
 		};
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_2pins_a>;
+	status = "okay";
+};
+
+&auart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart2_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_apx4>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hfront-porch = <40>;
+				vback-porch = <32>;
+				vfront-porch = <13>;
+				hsync-len = <48>;
+				vsync-len = <3>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "phg,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_RDY1__GPIO_0_21
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_LCD_RESET__GPIO_3_30
+			MX28_PAD_JTAG_RTCK__GPIO_4_20
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_apx4: lcdif-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA4__SSP2_D0
+			MX28_PAD_SSP0_DATA5__SSP2_D3
+			MX28_PAD_SSP0_DATA6__SSP2_CMD
+			MX28_PAD_SSP0_DATA7__SSP2_SCK
+			MX28_PAD_SSP2_SS1__SSP2_D1
+			MX28_PAD_SSP2_SS2__SSP2_D2
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__SSP2_SCK
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usb1 {
+      status = "okay";
+};
+
+&usbphy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index 85aa1cc3ff66..d004b1cbb4ae 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -16,107 +16,6 @@
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				ssd1306_cfa10036: ssd1306-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_cfa10036: leds-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_cfa10036: otg-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDY0__USB0_ID
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x31c3 /*
-						MX28_PAD_PWM3__GPIO_3_28 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_b>;
-				clock-frequency = <400000>;
-				status = "okay";
-
-				ssd1306: oled@3c {
-					compatible = "solomon,ssd1306fb-i2c";
-					pinctrl-names = "default";
-					pinctrl-0 = <&ssd1306_cfa10036>;
-					reg = <0x3c>;
-					reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-					solomon,height = <32>;
-					solomon,width = <128>;
-					solomon,page-offset = <0>;
-					solomon,com-lrremap;
-					solomon,com-invdir;
-					solomon,com-offset = <32>;
-				};
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_cfa10036>;
-			dr_mode = "peripheral";
-			phy_type = "utmi";
-			status = "okay";
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -138,3 +37,95 @@
 		gpio = <&gpio3 28 0>;
 	};
 };
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_b>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_b>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ssd1306: oled@3c {
+		compatible = "solomon,ssd1306fb-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ssd1306_cfa10036>;
+		reg = <0x3c>;
+		reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+		solomon,height = <32>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,com-lrremap;
+		solomon,com-invdir;
+		solomon,com-offset = <32>;
+	};
+};
+
+&pinctrl {
+	ssd1306_cfa10036: ssd1306-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__GPIO_2_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins_cfa10036: leds-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_RX__GPIO_3_4
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	usb0_otg_cfa10036: otg-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDY0__USB0_ID
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			0x31c3 /*
+			MX28_PAD_PWM3__GPIO_3_28 */
+		>;
+		fsl,drive-strength = <0>;
+		fsl,voltage = <1>;
+		fsl,pull-up = <0>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_otg_cfa10036>;
+	dr_mode = "peripheral";
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index a92b05ef390f..94d6614c1983 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -78,226 +78,6 @@
 		};
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10049: usb-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				i2cmux_pins_cfa10049: i2cmux-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_pins_cfa10049: mac0-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS2__GPIO_2_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pca_pins_cfa10049: pca-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_pins_cfa10049: rotary-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF1_SDATA0__GPIO_3_26
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi2_pins_cfa10049: spi2-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi3_pins_cfa10049: spi3-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDN__GPIO_0_24
-						MX28_PAD_GPMI_RESETN__GPIO_0_28
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_ALE__GPIO_0_26
-						MX28_PAD_GPMI_CLE__GPIO_0_27
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				w1_gpio_pins: w1-gpio@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D21__GPIO_1_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10049
-					     &lcdif_pins_cfa10049
-					     &lcdif_pins_cfa10049_pullup>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -315,19 +95,7 @@
 		};
 	};
 
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a
-				&mac0_pins_cfa10049>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	spi2 {
+	spi-2 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_pins_cfa10049>;
@@ -351,7 +119,7 @@
 		};
 	};
 
-	spi3 {
+	spi-3 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi3_pins_cfa10049>;
@@ -388,12 +156,12 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
 
-		rotary_button {
+		rotary-button {
 			label = "rotary_button";
 			gpios = <&gpio3 26 1>;
 			debounce-interval = <10>;
@@ -426,3 +194,225 @@
 		gpios = <&gpio1 21 0>;
 	};
 };
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10049
+		     &lcdif_pins_cfa10049
+		     &lcdif_pins_cfa10049_pullup>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9216000>;
+				hactive = <320>;
+				vactive = <480>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <15>;
+				vsync-len = <15>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a
+		&mac0_pins_cfa10049>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10049: usb-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	i2cmux_pins_cfa10049: i2cmux-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D22__GPIO_1_22
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_pins_cfa10049: mac0-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS2__GPIO_2_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	pca_pins_cfa10049: pca-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS0__GPIO_2_19
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	rotary_pins_cfa10049: rotary-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_I2C0_SCL__GPIO_3_24
+			MX28_PAD_I2C0_SDA__GPIO_3_25
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF1_SDATA0__GPIO_3_26
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	spi2_pins_cfa10049: spi2-cfa10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	spi3_pins_cfa10049: spi3-cfa10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDN__GPIO_0_24
+			MX28_PAD_GPMI_RESETN__GPIO_0_28
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_ALE__GPIO_0_26
+			MX28_PAD_GPMI_CLE__GPIO_0_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10049: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	w1_gpio_pins: w1-gpio@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D21__GPIO_1_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
index d05c370dfc17..42ba7da48beb 100644
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -14,122 +14,7 @@
 	model = "Crystalfontz CFA-10055 Board";
 	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10055: spi2-cfa10055@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10055
-					     &lcdif_pins_cfa10055
-					     &lcdif_pins_cfa10055_pullup>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-		};
-	};
-
-	spi2 {
+	spi-2 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_pins_cfa10055>;
@@ -159,3 +44,112 @@
 		default-brightness-level = <6>;
 	};
 };
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10055
+		     &lcdif_pins_cfa10055
+		     &lcdif_pins_cfa10055_pullup>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9216000>;
+				hactive = <320>;
+				vactive = <480>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <15>;
+				vsync-len = <15>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&pinctrl {
+	spi2_pins_cfa10055: spi2-cfa10055@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10055: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
index c1060bd5f17f..0e15bdfd7281 100644
--- a/arch/arm/boot/dts/imx28-cfa10056.dts
+++ b/arch/arm/boot/dts/imx28-cfa10056.dts
@@ -13,82 +13,7 @@
 	model = "Crystalfontz CFA-10056 Board";
 	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10056: spi2-cfa10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_pins_cfa10056: lcdif-10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						&lcdif_pins_cfa10056
-						&lcdif_pins_cfa10056_pullup >;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <32000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <5>;
-							vsync-len = <5>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	spi2 {
+	spi-2 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_pins_cfa10056>;
@@ -111,3 +36,74 @@
 		};
 	};
 };
+
+&pinctrl {
+	spi2_pins_cfa10056: spi2-cfa10056@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_pins_cfa10056: lcdif-10056@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+			&lcdif_pins_cfa10056
+			&lcdif_pins_cfa10056_pullup >;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <32000000>;
+				hactive = <480>;
+				vactive = <800>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <5>;
+				vsync-len = <5>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 2f7e479dbc74..27602c01f162 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -14,126 +14,6 @@
 	model = "Crystalfontz CFA-10057 Board";
 	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10057: usb-10057@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10057: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10057
-					     &lcdif_pins_cfa10057>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hfront-porch = <12>;
-							hback-porch = <2>;
-							vfront-porch = <5>;
-							vback-porch = <3>;
-							hsync-len = <2>;
-							vsync-len = <2>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -151,17 +31,6 @@
 		};
 	};
 
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 4 5000000>;
@@ -169,3 +38,124 @@
 		default-brightness-level = <7>;
 	};
 };
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10057
+		     &lcdif_pins_cfa10057>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <480>;
+				vactive = <800>;
+				hfront-porch = <12>;
+				hback-porch = <2>;
+				vfront-porch = <5>;
+				vback-porch = <3>;
+				hsync-len = <2>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10057: usb-10057@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10057: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
index 4465fd86785a..931c4d089b26 100644
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -14,93 +14,6 @@
 	model = "Crystalfontz CFA-10058 Board";
 	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10058: usb-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10058: lcdif-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						 &lcdif_pins_cfa10058>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <40>;
-							hfront-porch = <40>;
-							vback-porch = <13>;
-							vfront-porch = <29>;
-							hsync-len = <8>;
-							vsync-len = <8>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -118,17 +31,6 @@
 		};
 	};
 
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 3 5000000>;
@@ -136,3 +38,91 @@
 		default-brightness-level = <6>;
 	};
 };
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+			 &lcdif_pins_cfa10058>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <40>;
+				vback-porch = <13>;
+				vfront-porch = <29>;
+				hsync-len = <8>;
+				vsync-len = <8>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10058: usb-10058@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10058: lcdif-10058@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
index d451fa018d83..b73020ff1053 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
@@ -5,172 +5,13 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
+#include "imx28-duckbill-2.dts"
 
 / {
 	model = "I2SE Duckbill 2 485";
 	compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
 
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
 	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
 		rs485-red {
 			label = "duckbill:red:rs485";
 			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
@@ -182,3 +23,16 @@
 		};
 	};
 };
+
+&i2c0 {
+	status = "disabled";
+};
+
+&led_pins {
+	fsl,pinmux-ids = <
+		MX28_PAD_SAIF0_MCLK__GPIO_3_20
+		MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		MX28_PAD_I2C0_SCL__GPIO_3_24
+		MX28_PAD_I2C0_SDA__GPIO_3_25
+	>;
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
index bacb846f99e3..473d99b9b42f 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
@@ -5,184 +5,14 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
+#include "imx28-duckbill-2.dts"
 
 / {
 	model = "I2SE Duckbill 2 EnOcean";
 	compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
 
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-						MX28_PAD_AUART0_CTS__GPIO_3_2
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				enocean_button: enocean-button@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RTS__GPIO_3_3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
 	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
 		enocean-blue {
 			label = "duckbill:blue:enocean";
 			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
@@ -204,10 +34,36 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&enocean_button>;
 
-		enocean {
+		key-enocean {
 			label = "EnOcean";
 			linux,code = <KEY_NEW>;
 			gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
 		};
 	};
 };
+
+&i2c0 {
+	status = "disabled";
+};
+
+&led_pins {
+	fsl,pinmux-ids = <
+		MX28_PAD_SAIF0_MCLK__GPIO_3_20
+		MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		MX28_PAD_AUART0_CTS__GPIO_3_2
+		MX28_PAD_I2C0_SCL__GPIO_3_24
+		MX28_PAD_I2C0_SDA__GPIO_3_25
+	>;
+};
+
+&pinctrl {
+	enocean_button: enocean-button@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART0_RTS__GPIO_3_3
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
index 0e8be5975709..859d97a5a775 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
@@ -5,9 +5,7 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
+#include "imx28-duckbill-2.dts"
 
 / {
 	model = "I2SE Duckbill 2 SPI";
@@ -16,179 +14,50 @@
 	aliases {
 		ethernet1 = &qca7000;
 	};
+};
 
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				qca7000: ethernet@0 {
-					reg = <0>;
-					compatible = "qca,qca7000";
-					pinctrl-names = "default";
-					pinctrl-0 = <&qca7000_pins>;
-					interrupt-parent = <&gpio3>;
-					interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-					spi-cpha;
-					spi-cpol;
-					spi-max-frequency = <8000000>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: led@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				qca7000_pins: qca7000@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RTS__GPIO_3_3    /* Interrupt */
-						MX28_PAD_LCD_D13__GPIO_1_13      /* QCA7K reset */
-						MX28_PAD_LCD_D14__GPIO_1_14      /* GPIO 0 */
-						MX28_PAD_LCD_D15__GPIO_1_15      /* GPIO 1 */
-						MX28_PAD_LCD_D18__GPIO_1_18      /* GPIO 2 */
-						MX28_PAD_LCD_D21__GPIO_1_21      /* GPIO 3 */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
+&auart0 {
+	status = "disabled";
+};
 
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
+&i2c0 {
+	status = "disabled";
+};
 
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
+&pinctrl {
+	qca7000_pins: qca7000@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART0_RTS__GPIO_3_3    /* Interrupt */
+			MX28_PAD_LCD_D13__GPIO_1_13      /* QCA7K reset */
+			MX28_PAD_LCD_D14__GPIO_1_14      /* GPIO 0 */
+			MX28_PAD_LCD_D15__GPIO_1_15      /* GPIO 1 */
+			MX28_PAD_LCD_D18__GPIO_1_18      /* GPIO 2 */
+			MX28_PAD_LCD_D21__GPIO_1_21      /* GPIO 3 */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
+};
 
-	leds {
-		compatible = "gpio-leds";
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	/delete-property/ bus-width;
+	/delete-property/ vmmc-supply;
+	status = "okay";
+
+	qca7000: ethernet@0 {
+		reg = <0>;
+		compatible = "qca,qca7000";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
+		pinctrl-0 = <&qca7000_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <8000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts
index 23fd3036404d..4e28212e9626 100644
--- a/arch/arm/boot/dts/imx28-duckbill-2.dts
+++ b/arch/arm/boot/dts/imx28-duckbill-2.dts
@@ -18,138 +18,6 @@
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
 	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "3P3V";
@@ -176,3 +44,127 @@
 		};
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+	phy-supply = <&reg_3p3v>;
+	phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_phy_int_pin>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+			max-speed = <100>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_reset_pin: mac0-phy-reset@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_int_pin: mac0-phy-int@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins: leds@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF0_MCLK__GPIO_3_20
+			MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+	non-removable;
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_b
+		&mmc2_cd_cfg &mmc2_sck_cfg_b>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
index c666afb12445..13ffd533fdea 100644
--- a/arch/arm/boot/dts/imx28-duckbill.dts
+++ b/arch/arm/boot/dts/imx28-duckbill.dts
@@ -17,108 +17,6 @@
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			status = "okay";
-		};
-	};
-
 	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "3P3V";
@@ -145,3 +43,97 @@
 		};
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+	phy-supply = <&reg_3p3v>;
+	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_reset_pin: mac0-phy-reset@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__GPIO_2_7    /* PHY Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins: leds@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_RX__GPIO_3_4
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
index 3280fddaaf0d..b285a946e2c2 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
@@ -19,12 +19,12 @@
 		default-brightness-level = <10>;
 	};
 
-	button-sw3 {
+	gpio-keys-0 {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
 
-		sw3 {
+		switch-sw3 {
 			label = "SW3";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
@@ -32,12 +32,12 @@
 		};
 	};
 
-	button-sw4 {
+	gpio-keys-1 {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
 
-		sw4 {
+		switch-sw4 {
 			label = "SW4";
 			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 7e2b0f198dfa..783abb82b2a8 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -95,266 +95,258 @@
 		};
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
-					     &gpmi_pins_evk>;
-				status = "okay";
-			};
+	sound {
+		compatible = "fsl,imx28-evk-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-evk-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
 
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio2 12 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio3_5>;
 
-			ssp1: spi@80012000 {
-				compatible = "fsl,imx28-mmc";
-				bus-width = <8>;
-				wp-gpios = <&gpio0 28 0>;
-			};
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio3 5 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
 
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "sst,sst25vf016b", "jedec,spi-nor";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
+	backlight_display: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
 
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP1_CMD__GPIO_2_13
-						MX28_PAD_SSP1_DATA3__GPIO_2_15
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-						MX28_PAD_SSP1_SCK__GPIO_2_12
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_AUART2_TX__GPIO_3_9
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pin_gpio3_5: led_gpio3_5@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_evk: gpmi-nand-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPMI_CE1N
-						MX28_PAD_GPMI_RDY1__GPMI_READY1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_evk: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
 
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_evk>;
-				status = "okay";
-
-				port {
-					display_out: endpoint {
-						remote-endpoint = <&panel_in>;
-					};
-				};
-			};
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_pins_a>;
+	status = "okay";
+};
 
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
 
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-		};
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
 
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
 
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
+		     &gpmi_pins_evk>;
+	status = "okay";
+};
 
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-				fsl,ave-ctrl = <4>;
-				fsl,ave-delay = <2>;
-				fsl,settling = <10>;
-			};
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_evk>;
+	status = "okay";
 
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					#sound-dai-cells = <0>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				at24@51 {
-					compatible = "atmel,24c32";
-					pagesize = <32>;
-					reg = <0x51>;
-				};
-			};
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
 
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	fsl,ave-ctrl = <4>;
+	fsl,ave-delay = <2>;
+	fsl,settling = <10>;
+	status = "okay";
+};
 
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
 
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				uart-has-rtscts;
-				status = "okay";
-			};
+	at24@51 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x51>;
+	};
+};
 
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_pins_a>;
-				status = "okay";
-			};
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-supply = <&reg_fec_3v3>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
 
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
 
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP1_CMD__GPIO_2_13
+			MX28_PAD_SSP1_DATA3__GPIO_2_15
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+			MX28_PAD_SSP1_SCK__GPIO_2_12
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_LCD_RESET__GPIO_3_30
+			MX28_PAD_AUART2_RX__GPIO_3_8
+			MX28_PAD_AUART2_TX__GPIO_3_9
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_id_pins_a>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-supply = <&reg_fec_3v3>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
+	led_pin_gpio3_5: led_gpio3_5@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
 
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
+	gpmi_pins_evk: gpmi-nand-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE1N__GPMI_CE1N
+			MX28_PAD_GPMI_RDY1__GPMI_READY1
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	sound {
-		compatible = "fsl,imx28-evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
+	lcdif_pins_evk: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
+};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio3_5>;
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_pins_a>;
+	status = "okay";
+};
 
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 5 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
 
-	backlight_display: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <8>;
+	wp-gpios = <&gpio2 12 0>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp1 {
+	compatible = "fsl,imx28-mmc";
+	bus-width = <8>;
+	wp-gpios = <&gpio0 28 0>;
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
 	};
 };
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pins_a>;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-lwe.dtsi b/arch/arm/boot/dts/imx28-lwe.dtsi
new file mode 100644
index 000000000000..bb971e660db8
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-lwe.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	aliases {
+		spi2 = &ssp3;
+	};
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttyAMA0,115200 panic=1";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_3v3: regulator-reg-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_5v: regulator-reg-usb-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_fec_3v3: regulator-reg-fec-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-phy";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clks 53>;
+	assigned-clock-rates = <12000000>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&spi3_pins_a {
+	fsl,pinmux-ids = <
+		MX28_PAD_AUART2_RX__SSP3_D4
+		MX28_PAD_AUART2_TX__SSP3_D5
+		MX28_PAD_SSP3_SCK__SSP3_SCK
+		MX28_PAD_SSP3_MOSI__SSP3_CMD
+		MX28_PAD_SSP3_MISO__SSP3_D0
+		MX28_PAD_SSP3_SS0__SSP3_D3
+		MX28_PAD_AUART2_TX__GPIO_3_9
+	>;
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3v3>;
+	non-removable;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&ssp3 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins_a>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0 0x80000>;
+				read-only;
+			};
+
+			partition@80000 {
+				label = "env0";
+				reg = <0x80000 0x10000>;
+			};
+
+			partition@90000 {
+				label = "env1";
+				reg = <0x90000 0x10000>;
+			};
+
+			partition@100000 {
+				label = "kernel";
+				reg = <0x100000 0x400000>;
+			};
+
+			partition@500000 {
+				label = "swupdate";
+				reg = <0x500000 0x800000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb_5v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_b>, <&usb0_id_pins_a>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb_5v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_b>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi
index 2bdb4c093545..c08b14ad7cd5 100644
--- a/arch/arm/boot/dts/imx28-m28.dtsi
+++ b/arch/arm/boot/dts/imx28-m28.dtsi
@@ -14,31 +14,6 @@
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@68 {
-					compatible = "st,m41t62";
-					reg = <0x68>;
-				};
-			};
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -54,3 +29,22 @@
 		};
 	};
 };
+
+&gpmi {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
index 865ac3d573c7..6b01de9efd02 100644
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -15,187 +15,6 @@
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			nand-controller@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "gpmi-nfc-0-boot";
-					reg = <0x00000000 0x01400000>;
-					read-only;
-				};
-
-				partition@1 {
-					label = "gpmi-nfc-general-use";
-					reg = <0x01400000 0x0ec00000>;
-				};
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_a
-					     &mmc2_cd_cfg
-					     &mmc2_sck_cfg_a>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd1>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-						MX28_PAD_PWM4__GPIO_3_29
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_VSYNC__LCD_VSYNC
-						MX28_PAD_LCD_HSYNC__LCD_HSYNC
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_RESET__LCD_RESET
-						MX28_PAD_LCD_CS__LCD_ENABLE
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_gpio: leds-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP3_MISO__GPIO_2_26
-						MX28_PAD_SSP3_SCK__GPIO_2_24
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			ocotp@8002c000 {
-				status = "okay";
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <6410256>;
-							hactive = <320>;
-							vactive = <240>;
-							hback-porch = <38>;
-							hfront-porch = <20>;
-							vback-porch = <15>;
-							vfront-porch = <5>;
-							hsync-len = <30>;
-							vsync-len = <3>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			disable-over-current;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 3 5000000>;
@@ -264,3 +83,176 @@
 		};
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_2pins_b>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_b>;
+	status = "okay";
+};
+
+&gpmi {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+
+	partition@0 {
+		label = "gpmi-nfc-0-boot";
+		reg = <0x00000000 0x01400000>;
+		read-only;
+	};
+
+	partition@1 {
+		label = "gpmi-nfc-general-use";
+		reg = <0x01400000 0x0ec00000>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_m28>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <6410256>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vfront-porch = <5>;
+				hsync-len = <30>;
+				vsync-len = <3>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&ocotp {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS0__GPIO_2_19
+			MX28_PAD_PWM4__GPIO_3_29
+			MX28_PAD_AUART2_RX__GPIO_3_8
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_m28: lcdif-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_VSYNC__LCD_VSYNC
+			MX28_PAD_LCD_HSYNC__LCD_HSYNC
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_RESET__LCD_RESET
+			MX28_PAD_LCD_CS__LCD_ENABLE
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins_gpio: leds-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP3_MISO__GPIO_2_26
+			MX28_PAD_SSP3_SCK__GPIO_2_24
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_a
+		     &mmc2_cd_cfg
+		     &mmc2_sck_cfg_a>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd1>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index f3bddc5ada4b..e350d57a4cec 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -11,220 +11,6 @@
 	model = "Aries/DENX M28EVK";
 	compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio3 10 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p80", "jedec,spi-nor";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_AUART2_CTS__GPIO_3_10
-						MX28_PAD_AUART2_RTS__GPIO_3_11
-						MX28_PAD_AUART3_RX__GPIO_3_12
-						MX28_PAD_AUART3_TX__GPIO_3_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_ENABLE__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <16>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33260000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <0>;
-							hfront-porch = <256>;
-							vback-porch = <0>;
-							vfront-porch = <45>;
-							hsync-len = <1>;
-							vsync-len = <1>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				sgtl5000: codec@a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					#sound-dai-cells = <0>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				eeprom: eeprom@51 {
-					compatible = "atmel,24c128";
-					reg = <0x51>;
-					pagesize = <32>;
-				};
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_a>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			clocks = <&clks 57>, <&clks 57>;
-			clock-names = "ipg", "ahb";
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 4 5000000>;
@@ -269,3 +55,209 @@
 		audio-codec = <&sgtl5000>;
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_pins_a>;
+	status = "okay";
+};
+
+&auart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart2_2pins_b>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+
+	eeprom: eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_m28>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33260000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <0>;
+				hfront-porch = <256>;
+				vback-porch = <0>;
+				vfront-porch = <45>;
+				hsync-len = <1>;
+				vsync-len = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	status = "okay";
+	fsl,lradc-touchscreen-wires = <4>;
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	clocks = <&clks 57>, <&clks 57>;
+	clock-names = "ipg", "ahb";
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_AUART2_CTS__GPIO_3_10
+			MX28_PAD_AUART2_RTS__GPIO_3_11
+			MX28_PAD_AUART3_RX__GPIO_3_12
+			MX28_PAD_AUART3_TX__GPIO_3_13
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_m28: lcdif-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_ENABLE__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <8>;
+	wp-gpios = <&gpio3 10 0>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-pinfunc.h b/arch/arm/boot/dts/imx28-pinfunc.h
index e11f69ba0fe4..d427e6c2fa78 100644
--- a/arch/arm/boot/dts/imx28-pinfunc.h
+++ b/arch/arm/boot/dts/imx28-pinfunc.h
@@ -1,14 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Header providing constants for i.MX28 pinctrl bindings.
  *
  * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #ifndef __DT_BINDINGS_MX28_PINCTRL_H__
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 43be7a6a769b..5d74a68c56ff 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -15,111 +15,6 @@
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog-gpios@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D00__GPIO_0_0
-						MX28_PAD_GPMI_D03__GPIO_0_3
-						MX28_PAD_GPMI_D06__GPIO_0_6
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "everspin,mr25h256", "mr25h256";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-				eeprom: eeprom@52 {
-					compatible = "atmel,24c64";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_b>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -164,3 +59,99 @@
 
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog-gpios@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D00__GPIO_0_0
+			MX28_PAD_GPMI_D03__GPIO_0_3
+			MX28_PAD_GPMI_D06__GPIO_0_6
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "everspin,mr25h256", "mr25h256";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_b>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts
index 097ec35c62d8..ae6ed5c41be3 100644
--- a/arch/arm/boot/dts/imx28-ts4600.dts
+++ b/arch/arm/boot/dts/imx28-ts4600.dts
@@ -18,50 +18,6 @@
 		reg = <0x40000000 0x10000000>;   /* 256MB */
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_sck_cfg
-					     &en_sd_pwr>;
-				broken-cd = <1>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-
-				en_sd_pwr: en-sd-pwr@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__GPIO_3_28
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-			};
-		};
-
-		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
 	reg_vddio_sd0: regulator-vddio-sd0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vddio-sd0";
@@ -72,3 +28,39 @@
 	};
 
 };
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	en_sd_pwr: en-sd-pwr@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_sck_cfg
+		     &en_sd_pwr>;
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 164254c28f8e..ffe58c7093e1 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -1,43 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 /*
  * Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
  * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -221,7 +185,7 @@
 		linux,no-autorepeat;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -239,24 +203,6 @@
 		>;
 		/* enable this and disable ssp3 below, if you need full duplex SPI transfer */
 		status = "disabled";
-
-		spi@0 {
-			compatible = "spidev";
-			reg = <0>;
-			spi-max-frequency = <57600000>;
-		};
-
-		spi@1 {
-			compatible = "spidev";
-			reg = <1>;
-			spi-max-frequency = <57600000>;
-		};
-
-		spi@2 {
-			compatible = "spidev";
-			reg = <2>;
-			spi-max-frequency = <57600000>;
-		};
 	};
 };
 
@@ -356,7 +302,7 @@
 	};
 
 	ds1339: rtc@68 {
-		compatible = "mxim,ds1339";
+		compatible = "dallas,ds1339";
 		reg = <0x68>;
 		trickle-resistor-ohms = <250>;
 		trickle-diode-disable;
@@ -700,24 +646,6 @@
 	pinctrl-0 = <&spi3_pins_a>;
 	clock-frequency = <57600000>;
 	status = "okay";
-
-	spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <57600000>;
-	};
-
-	spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <57600000>;
-	};
-
-	spi@2 {
-		compatible = "spidev";
-		reg = <2>;
-		spi-max-frequency = <57600000>;
-	};
 };
 
 &usb0 {
diff --git a/arch/arm/boot/dts/imx28-xea.dts b/arch/arm/boot/dts/imx28-xea.dts
new file mode 100644
index 000000000000..a400c108f66a
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-xea.dts
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28-lwe.dtsi"
+
+/ {
+	compatible = "lwn,imx28-xea", "fsl,imx28";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a &hog_pins_tiva>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D00__GPIO_0_0
+			MX28_PAD_GPMI_D02__GPIO_0_2
+			MX28_PAD_GPMI_D05__GPIO_0_5
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_RDY0__GPIO_0_20
+			MX28_PAD_GPMI_RDY1__GPIO_0_21
+			MX28_PAD_GPMI_RDY2__GPIO_0_22
+			MX28_PAD_GPMI_RDN__GPIO_0_24
+			MX28_PAD_GPMI_CLE__GPIO_0_27
+			MX28_PAD_LCD_VSYNC__GPIO_1_28
+			MX28_PAD_SSP1_SCK__GPIO_2_12
+			MX28_PAD_SSP1_CMD__GPIO_2_13
+			MX28_PAD_SSP2_SS1__GPIO_2_20
+			MX28_PAD_SSP2_SS2__GPIO_2_21
+			MX28_PAD_LCD_D00__GPIO_1_0
+			MX28_PAD_LCD_D01__GPIO_1_1
+			MX28_PAD_LCD_D02__GPIO_1_2
+			MX28_PAD_LCD_D03__GPIO_1_3
+			MX28_PAD_LCD_D04__GPIO_1_4
+			MX28_PAD_LCD_D05__GPIO_1_5
+			MX28_PAD_LCD_D06__GPIO_1_6
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	hog_pins_tiva: hog@1 {
+		reg = <1>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDY3__GPIO_0_23
+			MX28_PAD_GPMI_WRN__GPIO_0_25
+		>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	hog_pins_coding: hog@2 {
+		reg = <2>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D01__GPIO_0_1
+			MX28_PAD_GPMI_D03__GPIO_0_3
+			MX28_PAD_GPMI_D04__GPIO_0_4
+			MX28_PAD_GPMI_D06__GPIO_0_6
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&reg_fec_3v3 {
+	gpio = <&gpio0 0 0>;
+};
+
+&reg_usb_5v {
+	gpio = <&gpio0 2 0>;
+};
+
+&spi2_pins_a {
+	fsl,pinmux-ids = <
+		MX28_PAD_SSP2_SCK__SSP2_SCK
+		MX28_PAD_SSP2_MOSI__SSP2_CMD
+		MX28_PAD_SSP2_MISO__SSP2_D0
+		MX28_PAD_SSP2_SS0__GPIO_2_19
+	>;
+};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 84d0176d5193..a8d3c3113e0f 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -85,10 +85,6 @@
 					      88 88 88 88
 					      88 88 88 88
 					      87 86 0 0>;
-				interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
-						  "gpmi0", "gmpi1", "gpmi2", "gmpi3",
-						  "gpmi4", "gmpi5", "gpmi6", "gmpi7",
-						  "hsadc", "lcdif", "empty", "empty";
 				#dma-cells = <1>;
 				dma-channels = <16>;
 				clocks = <&clks 25>;
@@ -110,6 +106,8 @@
 				interrupt-names = "bch";
 				clocks = <&clks 50>;
 				clock-names = "gpmi_io";
+				assigned-clocks = <&clks 13>;
+				assigned-clock-parents = <&clks 10>;
 				dmas = <&dma_apbh 4>;
 				dma-names = "rx-tx";
 				status = "disabled";
@@ -999,10 +997,6 @@
 					      80 81 68 69
 					      70 71 72 73
 					      74 75 76 77>;
-				interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
-						  "saif0", "saif1", "i2c0", "i2c1",
-						  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
-						  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
 				#dma-cells = <1>;
 				dma-channels = <16>;
 				clocks = <&clks 26>;
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index 948d2a543f8d..95c05f17a6d5 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -48,7 +48,7 @@
 		reg = <0x68000000 0x100000>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -63,7 +63,7 @@
 			ranges = <0 0x1fffc000 0x4000>;
 		};
 
-		bus@43f00000 { /* AIPS1 */
+		aips1: bus@43f00000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -166,7 +166,7 @@
 			};
 		};
 
-		spba@50000000 {
+		spba-bus@50000000 {
 			compatible = "fsl,spba-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -297,7 +297,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			sdma: sdma@53fd4000 {
+			sdma: dma-controller@53fd4000 {
 				compatible = "fsl,imx31-sdma";
 				reg = <0x53fd4000 0x4000>;
 				interrupts = <34>;
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
index b1c11170ac25..7f4f812b0811 100644
--- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -13,12 +13,12 @@
 	model = "Eukrea CPUIMX35";
 	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_bp1>;
 
-		bp1 {
+		button {
 			label = "BP1";
 			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 98ccc81ca6d9..d650f54c3fc6 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -189,7 +189,7 @@
 				status = "disabled";
 			};
 
-			fec: fec@50038000 {
+			fec: ethernet@50038000 {
 				compatible = "fsl,imx35-fec", "fsl,imx27-fec";
 				reg = <0x50038000 0x4000>;
 				clocks = <&clks 46>, <&clks 8>;
@@ -284,7 +284,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			sdma: sdma@53fd4000 {
+			sdma: dma-controller@53fd4000 {
 				compatible = "fsl,imx35-sdma";
 				reg = <0x53fd4000 0x4000>;
 				clocks = <&clks 9>, <&clks 65>;
diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts
index 97cfd970fe74..467db6b4ed7f 100644
--- a/arch/arm/boot/dts/imx50-kobo-aura.dts
+++ b/arch/arm/boot/dts/imx50-kobo-aura.dts
@@ -26,7 +26,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_leds>;
 
-		on {
+		led-on {
 			label = "kobo_aura:orange:on";
 			gpios = <&gpio6 24 GPIO_ACTIVE_LOW>;
 			panic-indicator;
@@ -38,20 +38,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 		};
 
-		hallsensor {
+		event-hallsensor {
 			label = "Hallsensor";
 			gpios = <&gpio5 15 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <EV_SW>;
 		};
 
-		frontlight {
+		event-frontlight {
 			label = "Frontlight";
 			gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DISPLAYTOGGLE>;
@@ -143,10 +143,24 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	/* TODO: embedded controller at 0x43 */
+	embedded-controller@43 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ec>;
+		compatible = "netronix,ntxec";
+		reg = <0x43>;
+		system-power-controller;
+		interrupts-extended = <&gpio4 11 IRQ_TYPE_EDGE_FALLING>;
+		#pwm-cells = <2>;
+	};
 };
 
 &iomuxc {
+	pinctrl_ec: ecgrp {
+		fsl,pins = <
+			MX50_PAD_CSPI_SS0__GPIO4_11		0x0	/* INT */
+		>;
+	};
+
 	pinctrl_gpiokeys: gpiokeysgrp {
 		fsl,pins = <
 			MX50_PAD_CSPI_MISO__GPIO4_10		0x0
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index a969f335b240..3d9a9f37f672 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -62,25 +62,25 @@
 
 	clocks {
 		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <22579200>;
 		};
 
 		ckih2 {
-			compatible = "fsl,imx-ckih2", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
@@ -94,21 +94,21 @@
 		status = "okay";
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&tzic>;
 		ranges;
 
-		bus@50000000 { /* AIPS1 */
+		aips1: bus@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x50000000 0x10000000>;
 			ranges;
 
-			spba@50000000 {
+			spba-bus@50000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -385,7 +385,7 @@
 			};
 		};
 
-		bus@60000000 {	/* AIPS2 */
+		aips2: bus@60000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -421,7 +421,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@63fb0000 {
+			sdma: dma-controller@63fb0000 {
 				compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index c66f274ba4e9..b61d55ca1467 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -63,7 +63,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 552196d8a60a..a1f9c6a72275 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -154,7 +154,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
index aab8d6f137c3..10cae7c3a879 100644
--- a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
@@ -13,6 +13,13 @@
 	chosen {
 		stdout-path = &uart1;
 	};
+
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
 };
 
 &esdhc1 {
@@ -63,6 +70,7 @@
 &usbh1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh1>;
+	fsl,usbphy = <&usbphy1>;
 	dr_mode = "host";
 	phy_type = "ulpi";
 	disable-over-current;
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
index 16addb3a2a1b..f0809a16a2ce 100644
--- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
@@ -34,22 +34,22 @@
 
 		regulators {
 			sw1_reg: sw1 {
-				regulator-min-microvolt = <1000000>;
+				regulator-min-microvolt = <1050000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			sw2_reg: sw2 {
-				regulator-min-microvolt = <1225000>;
-				regulator-max-microvolt = <1225000>;
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1275000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			sw3_reg: sw3 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1350000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
@@ -102,18 +102,6 @@
 				regulator-always-on;
 			};
 
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <3150000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
 			vgen3_reg: vgen3 {
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -124,8 +112,6 @@
 				regulator-always-on;
 			};
 
-			gpo1_reg: gpo1 { };
-
 			gpo2_reg: gpo2 { };
 
 			gpo3_reg: gpo3 { };
@@ -198,6 +184,7 @@
 &usbotg {
 	phy_type = "utmi_wide";
 	disable-over-current;
+	vbus-supply = <&swbst_reg>;
 	/* Device role is not known, keep status disabled */
 };
 
@@ -206,7 +193,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	lan9221: lan9221@5,0 {
+	lan9221: ethernet@5,0 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_lan9221>;
 		compatible = "smsc,lan9221", "smsc,lan9115";
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
index 6ecb83e7f336..f7408722d68a 100644
--- a/arch/arm/boot/dts/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -102,7 +102,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	rtc: m41t00@68 {
+	rtc: rtc@68 {
 		compatible = "st,m41t00";
 		reg = <0x68>;
 	};
@@ -174,7 +174,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_interrupt_fpga>;
 			interrupt-parent = <&gpio2>;
-			interrupts= <9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
 		};
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index ec8ca3ac2c1c..e537e06e11d7 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -137,7 +137,7 @@
 		};
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -556,7 +556,7 @@
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu1";
 		current-speed = <38400>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
index aa91e5dde4b8..21dd3f7abd48 100644
--- a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
+++ b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
@@ -311,7 +311,7 @@
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-mezz";
 		current-speed = <57600>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
index 875b10a7d674..9f857eb44bf7 100644
--- a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
+++ b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
@@ -319,7 +319,7 @@
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-esb";
 		current-speed = <57600>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 7ebb46ce9e36..ba92a3ea6872 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -48,25 +48,25 @@
 
 	clocks {
 		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		ckih2 {
-			compatible = "fsl,imx-ckih2", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
@@ -114,7 +114,7 @@
 		ports = <&ipu_di0>, <&ipu_di1>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -124,6 +124,9 @@
 		iram: sram@1ffe0000 {
 			compatible = "mmio-sram";
 			reg = <0x1ffe0000 0x20000>;
+			ranges = <0 0x1ffe0000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		gpu: gpu@30000000 {
@@ -171,14 +174,14 @@
 			};
 		};
 
-		bus@70000000 { /* AIPS1 */
+		aips1: bus@70000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x70000000 0x10000000>;
 			ranges;
 
-			spba@70000000 {
+			spba-bus@70000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -215,6 +218,8 @@
 					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
 						 <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 43 5 1>, <&sdma 44 5 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -426,6 +431,8 @@
 				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
 					 <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 18 4 1>, <&sdma 19 4 2>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -436,6 +443,8 @@
 				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
 					 <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 16 4 1>, <&sdma 17 4 2>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -454,7 +463,7 @@
 			};
 		};
 
-		bus@80000000 {	/* AIPS2 */
+		aips2: bus@80000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -467,7 +476,7 @@
 			};
 
 			iim: efuse@83f98000 {
-				compatible = "fsl,imx51-iim", "fsl,imx27-iim";
+				compatible = "fsl,imx51-iim", "fsl,imx27-iim", "syscon";
 				reg = <0x83f98000 0x4000>;
 				interrupts = <69>;
 				clocks = <&clks IMX5_CLK_IIM_GATE>;
@@ -498,7 +507,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@83fb0000 {
+			sdma: dma-controller@83fb0000 {
 				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
 				reg = <0x83fb0000 0x4000>;
 				interrupts = <6>;
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 9a2e1fde7128..23a7492e2929 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -24,7 +24,7 @@
 		reg = <0xf4000000 0x3ff0000>;
 		ranges;
 
-		lan9220@f4000000 {
+		ethernet@f4000000 {
 			compatible = "smsc,lan9220", "smsc,lan9115";
 			reg = <0xf4000000 0x2000000>;
 			phy-mode = "mii";
@@ -61,34 +61,34 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio5 10 0>;
 			linux,code = <KEY_HOME>;
 			wakeup-source;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio5 11 0>;
 			linux,code = <KEY_BACK>;
 			wakeup-source;
 		};
 
-		program {
+		key-program {
 			label = "Program";
 			gpios = <&gpio5 12 0>;
 			linux,code = <KEY_PROGRAM >;
 			wakeup-source;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio5 13 0>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio4 0 0>;
 			linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts
index cfb18849a92b..055d23a9aee7 100644
--- a/arch/arm/boot/dts/imx53-cx9020.dts
+++ b/arch/arm/boot/dts/imx53-cx9020.dts
@@ -86,27 +86,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		pwr-r {
+		led-pwr-r {
 			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		pwr-g {
+		led-pwr-g {
 			gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		pwr-b {
+		led-pwr-b {
 			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		sd1-b {
+		led-sd1-b {
 			linux,default-trigger = "mmc0";
 			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		sd2-b {
+		led-sd2-b {
 			linux,default-trigger = "mmc1";
 			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index a1a6228d1aa6..2bd2432d317f 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -52,13 +52,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pin_gpio>;
 
-		user1 {
+		led-user1 {
 			label = "user1";
 			gpios = <&gpio2 8 0>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		user2 {
+		led-user2 {
 			label = "user2";
 			gpios = <&gpio2 9 0>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index f98691ae4415..4d77b6077fc1 100644
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -34,33 +34,59 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user1 {
+		led-user1 {
 			label = "TestLed601";
 			gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 		};
 
-		user2 {
+		led-user2 {
 			label = "TestLed602";
 			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		eth {
+		led-eth {
 			label = "EthLedYe";
 			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "netdev";
 		};
 	};
 
+	lvds-decoder {
+		compatible = "ti,ds90cf364a", "lvds-decoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_decoder_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
 	panel {
 		compatible = "edt,etm0700g0dh6";
 		pinctrl-0 = <&pinctrl_display_gpio>;
+		pinctrl-names = "default";
 		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
+				remote-endpoint = <&lvds_decoder_out>;
 			};
 		};
 	};
@@ -76,8 +102,7 @@
 		regulator-name = "vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		gpio = <&gpio1 2 0>;
 	};
 };
 
@@ -388,13 +413,13 @@
 
 		pinctrl_power_button: powerbutgrp {
 			fsl,pins = <
-				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
+				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
 			>;
 		};
 
 		pinctrl_power_out: poweroutgrp {
 			fsl,pins = <
-				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
+				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
 			>;
 		};
 
@@ -450,7 +475,7 @@
 			reg = <2>;
 
 			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
+				remote-endpoint = <&lvds_decoder_in>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index be040b6a02fa..70c4a4852256 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -70,6 +70,12 @@
 		clock-frequency = <11289600>;
 	};
 
+	achc_24M: achc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
 	sgtlsound: sound {
 		compatible = "fsl,imx53-cpuvo-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
@@ -314,16 +320,13 @@
 		    &gpio4 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	spidev0: spi@0 {
-		compatible = "ge,achc";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "ge,achc";
-		reg = <1>;
-		spi-max-frequency = <1000000>;
+	spidev0: spi@1 {
+		compatible = "ge,achc", "nxp,kinetis-k20";
+		reg = <1>, <0>;
+		vdd-supply = <&reg_3v3>;
+		vdda-supply = <&reg_3v3>;
+		clocks = <&achc_24M>;
+		reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 	};
 
 	gpioxra0: gpio@2 {
@@ -485,7 +488,7 @@
 	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9547";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -651,6 +654,7 @@
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,dma-info = <24 20>;
 	status = "okay";
 };
 
@@ -670,6 +674,7 @@
 &uart5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5>;
+	fsl,dma-info = <4096 4>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 9b4efcd82636..50fef8dd3675 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -45,20 +45,20 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			wakeup-source;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
@@ -71,7 +71,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pin_gpio7_7>;
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio7 7 0>;
 			linux,default-trigger = "heartbeat";
@@ -142,6 +142,7 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -209,6 +210,7 @@
 				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
 				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
 				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+				MX53_PAD_EIM_DA13__GPIO3_13		0xe4
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/imx53-sk-imx53.dts b/arch/arm/boot/dts/imx53-sk-imx53.dts
new file mode 100644
index 000000000000..103e73176e47
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-sk-imx53.dts
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2023 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx53.dtsi"
+
+/ {
+	model = "StarterKit SK-iMX53 Board";
+	compatible = "starterkit,sk-imx53", "fsl,imx53";
+
+	aliases {
+		/*
+		 * iMX RTC is not battery powered on this board.
+		 * Use the i2c RTC as rtc0.
+		 */
+		rtc0 = &rtc;
+		rtc1 = &srtc;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		/* v2 had only 256 MB, v3 has 512 MB */
+		reg = <0x70000000 0x20000000>;
+	};
+
+	reg_usb1_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&esdhc1 {
+	cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x1e4
+			MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x1e4
+			MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x1e4
+			MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x1e4
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_INTRQ__CAN1_TXCAN		0x1e4
+			MX53_PAD_PATA_DIOR__CAN1_RXCAN		0x1e4
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__ECSPI1_SCLK		0x1e4
+			MX53_PAD_EIM_D17__ECSPI1_MISO		0x1e4
+			MX53_PAD_EIM_D18__ECSPI1_MOSI		0x1e4
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT9__ECSPI2_MOSI		0x1e4
+			MX53_PAD_CSI0_DAT10__ECSPI2_MISO	0x1e4
+			MX53_PAD_EIM_CS0__ECSPI2_SCLK		0x1e4
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			MX53_PAD_EIM_DA14__GPIO3_14		0x1f0
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
+			MX53_PAD_GPIO_1__GPIO1_1		0x1c4
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__I2C2_SDA             0x400001e4
+			MX53_PAD_EIM_EB2__I2C2_SCL		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__GPIO4_13		0x1e4
+			MX53_PAD_EIM_EB2__GPIO2_30		0x1e4
+		>;
+	};
+
+	pinctrl_nand: nandgrp {
+		fsl,pins = <
+			MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+			MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+			MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+			MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+			MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+			MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+			MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+			MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1	0x4
+			MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2	0x4
+			MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3	0x4
+			MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
+			MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
+			MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
+			MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
+			MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
+			MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
+			MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
+			MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_9__PWM1_PWMO		0x5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D24__UART3_TXD_MUX		0x1e4
+			MX53_PAD_EIM_D25__UART3_RXD_MUX		0x1e4
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__UART4_TXD_MUX	0x1e4
+			MX53_PAD_KEY_ROW0__UART4_RXD_MUX	0x1e4
+		>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x00100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u-boot";
+			reg = <0x00100000 0x00100000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x00200000 0x00100000>;
+			read-only;
+		};
+
+		partition@1000000 {
+			label = "kernel-safe";
+			reg = <0x01000000 0x00a00000>;
+			read-only;
+		};
+
+		partition@1a00000 {
+			label = "kernel";
+			reg = <0x01a00000 0x005e0000>;
+		};
+
+		partition@2000000 {
+			label = "ubifs";
+			reg = <0x02000000 0x0e000000>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	phy_type = "utmi";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 9be44e807188..f8d17967a67e 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -19,13 +19,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio2 14 0>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio2 15 0>;
 			linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 7c9730f3f820..a439a47fb65a 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -81,7 +81,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_key>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <116>; /* KEY_POWER */
@@ -94,7 +94,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_stk5led>;
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -192,17 +192,6 @@
 		&gpio3 19 GPIO_ACTIVE_HIGH
 	>;
 
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <54000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <54000000>;
-	};
 };
 
 &esdhc1 {
@@ -252,7 +241,7 @@
 	clock-frequency = <400000>;
 	status = "okay";
 
-	rtc1: ds1339@68 {
+	rtc1: rtc@68 {
 		compatible = "dallas,ds1339";
 		reg = <0x68>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts
index f34993a490ee..acc44010d510 100644
--- a/arch/arm/boot/dts/imx53-usbarmory.dts
+++ b/arch/arm/boot/dts/imx53-usbarmory.dts
@@ -67,7 +67,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user {
+		led-user {
 			label = "LED";
 			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 000050aeeabe..17dc13719639 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -86,25 +86,25 @@
 
 	clocks {
 		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <22579200>;
 		};
 
 		ckih2 {
-			compatible = "fsl,imx-ckih2", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
@@ -132,7 +132,7 @@
 		status = "okay";
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -222,14 +222,14 @@
 			clock-names = "core_clk", "mem_iface_clk";
 		};
 
-		bus@50000000 { /* AIPS1 */
+		aips1: bus@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x50000000 0x10000000>;
 			ranges;
 
-			spba@50000000 {
+			spba-bus@50000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -655,7 +655,7 @@
 			};
 		};
 
-		bus@60000000 {	/* AIPS2 */
+		aips2: bus@60000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -668,7 +668,7 @@
 			};
 
 			iim: efuse@63f98000 {
-				compatible = "fsl,imx53-iim", "fsl,imx27-iim";
+				compatible = "fsl,imx53-iim", "fsl,imx27-iim", "syscon";
 				reg = <0x63f98000 0x4000>;
 				interrupts = <69>;
 				clocks = <&clks IMX5_CLK_IIM_GATE>;
@@ -710,7 +710,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@63fb0000 {
+			sdma: dma-controller@63fb0000 {
 				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
@@ -850,6 +850,9 @@
 		ocram: sram@f8000000 {
 			compatible = "mmio-sram";
 			reg = <0xf8000000 0x20000>;
+			ranges = <0 0xf8000000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX5_CLK_OCRAM>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
index d9de9b4f0c52..d477a937b47a 100644
--- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
+++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
@@ -6,7 +6,7 @@
 	keyboard {
 		compatible = "gpio-keys";
 
-		btn0 {
+		button-0 {
 			gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>;
 			label = "btn0";
 			linux,code = <KEY_WAKEUP>;
@@ -14,7 +14,7 @@
 			wakeup-source;
 		};
 
-		btn1 {
+		button-1 {
 			gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>;
 			label = "btn1";
 			linux,code = <KEY_WAKEUP>;
@@ -22,7 +22,7 @@
 			wakeup-source;
 		};
 
-		btn2 {
+		button-2 {
 			gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>;
 			label = "btn2";
 			linux,code = <KEY_WAKEUP>;
@@ -30,7 +30,7 @@
 			wakeup-source;
 		};
 
-		btn3 {
+		button-3 {
 			gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>;
 			label = "btn3";
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts
index 4329b372d8cb..e6a4e2770640 100644
--- a/arch/arm/boot/dts/imx6dl-alti6p.dts
+++ b/arch/arm/boot/dts/imx6dl-alti6p.dts
@@ -22,6 +22,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	i2c2-mux {
@@ -191,8 +192,15 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clock_ksz8081>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081>;
+};
+
 &ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
@@ -208,10 +216,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clock_ksz8081>;
-	clock-names = "ipg", "ahb", "ptp";
 	status = "okay";
 
 	mdio {
diff --git a/arch/arm/boot/dts/imx6dl-b105pv2.dts b/arch/arm/boot/dts/imx6dl-b105pv2.dts
new file mode 100644
index 000000000000..411aa72d344b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b105pv2.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B105Pv2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5pv2.dtsi"
+
+/ {
+	model = "General Electric B105Pv2";
+	compatible = "ge,imx6dl-b105pv2", "congatec,qmx6", "fsl,imx6dl";
+
+	panel {
+		compatible = "auo,g101evn010";
+	};
+};
+
+&i2c3 {
+	touchscreen@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-b105v2.dts b/arch/arm/boot/dts/imx6dl-b105v2.dts
new file mode 100644
index 000000000000..d011127c635b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b105v2.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B105v2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5v2.dtsi"
+
+/ {
+	model = "General Electric B105v2";
+	compatible = "ge,imx6dl-b105v2", "congatec,qmx6", "fsl,imx6dl";
+
+	panel {
+		compatible = "auo,g101evn010";
+	};
+};
+
+&i2c3 {
+	touchscreen@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-b125pv2.dts b/arch/arm/boot/dts/imx6dl-b125pv2.dts
new file mode 100644
index 000000000000..ca840fa84052
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b125pv2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B125Pv2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5pv2.dtsi"
+
+/ {
+	model = "General Electric B125Pv2";
+	compatible = "ge,imx6dl-b125pv2", "congatec,qmx6", "fsl,imx6dl";
+
+	panel {
+		compatible = "auo,g121ean01";
+	};
+};
+
+&i2c3 {
+	touchscreen@2a {
+		compatible = "eeti,exc80h60";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-b125v2.dts b/arch/arm/boot/dts/imx6dl-b125v2.dts
new file mode 100644
index 000000000000..81e5a9cb8900
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b125v2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B125v2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5v2.dtsi"
+
+/ {
+	model = "General Electric B125v2";
+	compatible = "ge,imx6dl-b125v2", "congatec,qmx6", "fsl,imx6dl";
+
+	panel {
+		compatible = "auo,g121ean01";
+	};
+};
+
+&i2c3 {
+	touchscreen@2a {
+		compatible = "eeti,exc80h60";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-b155v2.dts b/arch/arm/boot/dts/imx6dl-b155v2.dts
new file mode 100644
index 000000000000..c861937b30f6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b155v2.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B155v2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5v2.dtsi"
+
+/ {
+	model = "General Electric B155v2";
+	compatible = "ge,imx6dl-b155v2", "congatec,qmx6", "fsl,imx6dl";
+
+	panel {
+		compatible = "auo,g156xtn01";
+	};
+};
+
+&i2c3 {
+	touchscreen@2a {
+		compatible = "eeti,exc80h84";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
new file mode 100644
index 000000000000..37697fac9dea
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B1x5Pv2
+// patient monitor series
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+#include <dt-bindings/input/input.h>
+#include "imx6dl-qmx6.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	/* Do not allow frequencies above 800MHz */
+	cpus {
+		cpu@0 {
+			operating-points = <
+				/* kHz    uV */
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz	SOC-PU uV */
+				792000	1175000
+				396000	1175000
+			>;
+		};
+
+		cpu@1 {
+			operating-points = <
+				/* kHz    uV */
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz	SOC-PU uV */
+				792000	1175000
+				396000	1175000
+			>;
+		};
+	};
+
+	reg_syspwr: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "SYS_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	reg_5v_pmc: regulator-5v-pmc {
+		compatible = "regulator-fixed";
+		regulator-name = "5V PMC";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_syspwr>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_syspwr>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_syspwr>;
+	};
+
+	reg_5v0_audio: regulator-5v0-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "5V0_AUDIO";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v>;
+		gpio = <&tca6424a 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * This must be always-on for da7212, which has some not
+		 * properly documented dependencies for it's speaker supply
+		 * pin. The issue manifests as speaker volume being very low.
+		 */
+		regulator-always-on;
+	};
+
+
+	reg_3v3_audio: regulator-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_3v3>;
+		pinctrl-0 = <&pinctrl_q7_hda_reset>;
+		pinctrl-names = "default";
+		gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_2v5_audio: regulator-2v5-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "2V5_AUDIO";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		vin-supply = <&reg_3v3_audio>;
+
+	};
+
+	reg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "WLAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_3v3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_sdio_power>;
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <70000>;
+	};
+
+	reg_bl: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "LED_VCC";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&reg_syspwr>;
+		pinctrl-0 = <&pinctrl_q7_lcd_power>;
+		pinctrl-names = "default";
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v>;
+	};
+
+	usb_power: regulator-usb-power {
+		compatible = "regulator-fixed";
+		regulator-name = "USB POWER";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v>;
+	};
+
+	charger: battery-charger {
+		compatible = "gpio-charger"; /* ti,bq24172 */
+		charger-type = "mains";
+		gpios = <&tca6424a 3 GPIO_ACTIVE_LOW>;
+		charge-current-limit-gpios = <&tca6424a 11 GPIO_ACTIVE_HIGH>,
+					     <&tca6424a 12 GPIO_ACTIVE_HIGH>;
+		charge-current-limit-mapping = <1300000 0x0>,
+					       <700000 0x1>,
+					       <0 0x2>;
+		charge-status-gpios = <&tca6424a 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_spi_cs1>;
+		gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+	};
+
+	power-button-key {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_sleep_button>;
+
+		power-button {
+			label = "power button";
+			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	rotary-encoder-key {
+		compatible = "gpio-keys";
+
+		rotary-encoder-event {
+			label = "rotary-encoder press";
+			gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_ENTER>;
+			linux,can-disable;
+		};
+	};
+
+	rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_gpio2 &pinctrl_q7_gpio4>;
+		gpios = <&gpio4 26 GPIO_ACTIVE_LOW>, <&gpio1 0 GPIO_ACTIVE_LOW>;
+		rotary-encoder,relative-axis;
+		rotary-encoder,steps-per-period = <2>;
+		wakeup-source;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>;
+
+		led-alarm1 {
+			label = "alarm:red";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-alarm2 {
+			label = "alarm:yellow";
+			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-alarm3 {
+			label = "alarm:blue";
+			gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_backlight_enable>;
+		power-supply = <&reg_bl>;
+		pwms = <&pwm4 0 5000000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <179>;
+		enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	panel {
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets = "Speaker", "Ext Spk";
+		simple-audio-card,audio-routing = "Ext Spk", "LINE";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	battery: battery@b {
+		compatible = "ti,bq20z65", "sbs,sbs-battery";
+		reg = <0x0b>;
+		sbs,battery-detect-gpios = <&tca6424a 5 GPIO_ACTIVE_LOW>;
+		sbs,i2c-retry-count = <5>;
+		power-supplies = <&charger>;
+	};
+
+	codec: audio-codec@1a {
+		compatible = "dlg,da7212";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_2v5_audio>;
+		VDDSP-supply = <&reg_5v0_audio>;
+		VDDMIC-supply = <&reg_3v3_audio>;
+		VDDIO-supply = <&reg_3v3_audio>;
+		clocks = <&clk_ext_audio_codec>;
+		clock-names = "mclk";
+	};
+};
+
+&i2c5 {
+	tca6424a: gpio-controller@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_gpio6>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-line-names = "GPIO_ROTOR#", "ACM_IO_INT", "TMP_SENSOR_IRQ", "AC_IN",
+				  "TF_S", "BATT_T", "LED_INC_CHAR", "ACM1_OCF",
+				  "ACM2_OCF", "ACM_IO_RST", "USB1_POWER_EN", "EGPIO_CC_CTL0",
+				  "EGPIO_CC_CTL1", "12V_OEMNBP_EN", "CP2105_RST", "",
+				  "SPEAKER_PA_EN", "ARM7_UPI_RESET", "ARM7_PWR_RST", "NURSE_CALL",
+				  "MARKER_EN", "EGPIO_TOUCH_RST", "PRESSURE_INT1", "PRESSURE_INT2";
+
+	};
+
+	tmp75: temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+		vs-supply = <&reg_3v3>;
+		interrupt-parent = <&tca6424a>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&usb_power>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+
+	/*
+	 * TPS2051BDGN fault-gpio is connected to Q7[86] USB_0_1_OC_N.
+	 * On QMX6 this is not connceted to the i.MX6, but to the USB Hub
+	 * from &usbh1. This means, that we cannot easily detect and handle
+	 * over-current events. Fortunately the regulator limits the current
+	 * automatically, so the hardware is still protected.
+	 */
+};
+
+&usdhc4 {
+	/* WiFi module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	max-frequency = <25000000>;
+	vmmc-supply = <&reg_wlan>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_gpio7>;
+
+		interrupt-parent = <&gpio4>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+
+		tcxo-clock-frequency = <26000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
new file mode 100644
index 000000000000..f028b6a191df
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B1x5v2
+// patient monitor series
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+#include <dt-bindings/input/input.h>
+#include "imx6dl-b1x5pv2.dtsi"
+
+/ {
+	reg_3v3_acm: regulator-3v3-acm {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3 ACM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_3v3>;
+	};
+};
+
+&i2c1 {
+	tca6416: gpio-controller@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		reset-gpios = <&tca6424a 9 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_3v3_acm>;
+		gpio-line-names = "ACM1_EN", "ACM1_CL0", "ACM1_CL1", "ACM1_CL2",
+				  "", "ACM2_EN", "ACM2_CL0", "ACM2_CL1",
+				  "ACM2_CL2", "", "", "",
+				  "", "", "", "";
+
+		/*
+		 * The interrupt pin is connected to &tca6424a pin 1, but the Linux
+		 * TCA6424 driver cannot handle low type interrupts at the moment
+		 * (and support cannot be added without some ugly hacks). Since this
+		 * controller does not have any input type GPIOs, just pretend
+		 * that the interrupt pin is unconnected.
+		 */
+	};
+};
+
+&i2c5 {
+	mpl3115a2: pressure-sensor@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+
+		/*
+		 * The MPL3115 interrupts are connected to pin 22 and 23
+		 * of &tca6424a, but the binding does not yet support
+		 * interrupts.
+		 */
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-aster.dts b/arch/arm/boot/dts/imx6dl-colibri-aster.dts
new file mode 100644
index 000000000000..82a0d1a28d12
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-aster.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Aster Board";
+	compatible = "toradex,colibri_imx6dl-aster", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	cs-gpios = <
+		&gpio5 2 GPIO_ACTIVE_HIGH
+		&gpio5 4 GPIO_ACTIVE_HIGH
+	>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4 &pinctrl_csi_gpio_2>;
+	status = "okay";
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_csi_gpio_1
+		&pinctrl_gpio_2
+		&pinctrl_gpio_aster
+		&pinctrl_usbh_oc_1
+		&pinctrl_usbc_id_1
+		&pinctrl_weim_gpio_5
+	>;
+
+	pinctrl_gpio_aster: gpioaster {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x1b0b0
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08		0x1b0b0
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b0b0
+		>;
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index 7da74e6f46d9..f50a26dd34c0 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  */
@@ -17,12 +17,6 @@
 	compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
 		     "fsl,imx6dl";
 
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
 	aliases {
 		i2c0 = &i2c2;
 		i2c1 = &i2c3;
@@ -44,67 +38,6 @@
 		clock-frequency = <16000000>;
 		clock-output-names = "clk16m";
 	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-};
-
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	status = "okay";
 };
 
 /* Colibri SSP */
@@ -113,40 +46,21 @@
 
 	mcp251x0: mcp251x@0 {
 		compatible = "microchip,mcp2515";
-		reg = <0>;
 		clocks = <&clk16m>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <27 0x2>;
+		reg = <0>;
 		spi-max-frequency = <10000000>;
 		status = "okay";
 	};
 };
 
-&hdmi {
-	status = "okay";
-};
-
 /*
  * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
  */
 &i2c3 {
 	status = "okay";
 
-	/*
-	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
-	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
-	 */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pcap_1>;
-		reg = <0x4a>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 */
-		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 */
-		status = "disabled";
-	};
-
 	/* M41T0M6 real time clock on carrier board */
 	rtc_i2c: rtc@68 {
 		compatible = "st,m41t0";
@@ -162,24 +76,6 @@
 		&pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6
 		&pinctrl_usbh_oc_1 &pinctrl_usbc_id_1
 	>;
-
-	pinctrl_pcap_1: pcap1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0 /* SODIMM 28 */
-			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0 /* SODIMM 30 */
-		>;
-	};
-
-	pinctrl_mxt_ts: mxttsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_CS1__GPIO2_IO24	0x130b0 /* SODIMM 107 */
-			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14	0x130b0 /* SODIMM 106 */
-		>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
 };
 
 &pwm1 {
@@ -215,11 +111,12 @@
 };
 
 &usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
+	disable-over-current;
 	status = "okay";
 };
 
 &usbotg {
+	disable-over-current;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts
new file mode 100644
index 000000000000..3a6d3889760d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-iris.dts"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Iris V2 Board";
+	compatible = "toradex,colibri_imx6dl-iris-v2", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		regulator-name = "3v3_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_iris	&pinctrl_usbh_oc_1 &pinctrl_usbc_id_1>;
+
+	pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
+		>;
+	};
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	cap-power-off-card;
+	/* uncomment the following to enable SD card UHS mode if you have a V1.1 module */
+	/* /delete-property/ no-1-8-v; */
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris.dts b/arch/arm/boot/dts/imx6dl-colibri-iris.dts
new file mode 100644
index 000000000000..4303c88bb2a9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-iris.dts
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Iris Board";
+	compatible = "toradex,colibri_imx6dl-iris", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	status = "okay";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_forceoff &pinctrl_uart23_forceoff>;
+
+	/*
+	 * uart-a-on-x13-enable turns the UART transceiver for UART_A on. If one
+	 * wants to turn the transceiver off, that property has to be deleted
+	 * and the gpio handled in userspace.
+	 * The same applies to uart-b-c-on-x14-enable where the UART_B and
+	 * UART_C transceiver is turned on.
+	 */
+	uart-a-on-x13-enable-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
+		output-high;
+	};
+
+	uart-b-c-on-x14-enable-hog {
+		gpio-hog;
+		gpios = <8 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
+		output-high;
+	};
+};
+
+/*
+ * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	status = "okay";
+
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_gpio_iris
+		&pinctrl_usbh_oc_1
+		&pinctrl_usbc_id_1
+	>;
+
+	pinctrl_gpio_iris: gpioirisgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21	0x1b0b0
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20	0x1b0b0
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19	0x1b0b0
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18	0x1b0b0
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06	0x1b0b0
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03	0x1b0b0
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_forceoff: uart1forceoffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart23_forceoff: uart23forceoffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
+		>;
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
deleted file mode 100644
index 223275f028f1..000000000000
--- a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2020 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6dl-colibri-eval-v3.dts"
-#include "imx6qdl-colibri-v1_1-uhs.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri_imx6dl-v1_1-eval-v3",
-		     "toradex,colibri_imx6dl-v1_1",
-		     "toradex,colibri_imx6dl-eval-v3",
-		     "toradex,colibri_imx6dl",
-		     "fsl,imx6dl";
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	status = "okay";
-	/*
-	 * Please make sure your carrier board does not pull-up any of
-	 * the MMC/SD signals to 3.3 volt before attempting to activate
-	 * UHS-I support.
-	 * To let signaling voltage be changed to 1.8V, please
-	 * delete no-1-8-v property (example below):
-	 * /delete-property/no-1-8-v;
-	 */
-};
diff --git a/arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts b/arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts
new file mode 100644
index 000000000000..038bb0025556
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6DL-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCOM PCB number: 493-300 or newer
+ * PicoITX PCB number: 487-600 or newer
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-picoitx.dtsi"
+
+/ {
+	model = "DH electronics i.MX6DL DHCOM on PicoITX";
+	compatible = "dh,imx6dl-dhcom-picoitx", "dh,imx6dl-dhcom-som",
+		     "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
index b4a9523e325b..33825b5a8f26 100644
--- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
+++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
@@ -28,6 +28,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_usb_h1_vbus: regulator-usb-h1-vbus {
@@ -64,6 +65,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&rmii_clk>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&rmii_clk>;
+};
+
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
@@ -297,7 +305,6 @@
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
 	phy-handle = <&phy>;
-	clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
 	status = "okay";
 
 	mdio {
diff --git a/arch/arm/boot/dts/imx6dl-lanmcu.dts b/arch/arm/boot/dts/imx6dl-lanmcu.dts
index 6b6e6fcdea9c..fa823988312d 100644
--- a/arch/arm/boot/dts/imx6dl-lanmcu.dts
+++ b/arch/arm/boot/dts/imx6dl-lanmcu.dts
@@ -21,6 +21,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	backlight: backlight {
@@ -109,14 +110,17 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clock_ksz8081>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clock_ksz8081>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rgmii_phy>;
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx6dl-mba6.dtsi b/arch/arm/boot/dts/imx6dl-mba6.dtsi
new file mode 100644
index 000000000000..b749b424bbd6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-mba6.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&ethphy {
+	rxdv-skew-ps = <180>;
+	txen-skew-ps = <0>;
+	rxd3-skew-ps = <180>;
+	rxd2-skew-ps = <180>;
+	rxd1-skew-ps = <180>;
+	rxd0-skew-ps = <180>;
+	txd3-skew-ps = <120>;
+	txd2-skew-ps = <0>;
+	txd1-skew-ps = <300>;
+	txd0-skew-ps = <120>;
+	txc-skew-ps = <1860>;
+	rxc-skew-ps = <1860>;
+};
diff --git a/arch/arm/boot/dts/imx6dl-mba6a.dts b/arch/arm/boot/dts/imx6dl-mba6a.dts
new file mode 100644
index 000000000000..df0a96b28af0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-mba6a.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl-tqma6a.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6a.dtsi"
+#include "imx6dl-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6S/DL on MBa6x";
+	compatible = "tq,imx6dl-mba6x-a", "tq,mba6a",
+		     "tq,imx6dl-tqma6dl-a", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-mba6b.dts b/arch/arm/boot/dts/imx6dl-mba6b.dts
new file mode 100644
index 000000000000..610b19d2db0f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-mba6b.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6dl-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6S/DL on MBa6x";
+	compatible = "tq,imx6dl-mba6x-b", "tq,mba6b",
+		     "tq,imx6dl-tqma6dl-b", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
index 9f7f9f98139d..d906a7f05aaa 100644
--- a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
@@ -8,6 +8,9 @@
 #include "imx6dl.dtsi"
 #include "imx6qdl-phytec-phycore-som.dtsi"
 #include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND";
diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts
index 333c306aa946..e98046eea7a4 100644
--- a/arch/arm/boot/dts/imx6dl-plybas.dts
+++ b/arch/arm/boot/dts/imx6dl-plybas.dts
@@ -19,17 +19,15 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
-		button@20 {
+		button-start {
 			label = "START";
 			linux,code = <31>;
 			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
 		};
 
-		button@21 {
+		button-clean {
 			label = "CLEAN";
 			linux,code = <46>;
 			gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
@@ -77,6 +75,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_5v0: regulator-5v0 {
@@ -101,6 +100,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &ecspi1 {
 	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -118,10 +124,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rgmii_phy>;
 	status = "okay";
 
@@ -216,7 +218,7 @@
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	linux,rs485-enabled-at-boot-time;
 	rs485-rts-delay = <0 20>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts
index 4d0d3d3386af..e3c10483f33b 100644
--- a/arch/arm/boot/dts/imx6dl-plym2m.dts
+++ b/arch/arm/boot/dts/imx6dl-plym2m.dts
@@ -50,6 +50,11 @@
 		};
 	};
 
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -79,6 +84,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_3v3: regulator-3v3 {
@@ -101,6 +107,64 @@
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
 	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+		};
+
+		touch-thermal0 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+		};
+
+		touch-thermal1 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
 };
 
 &can1 {
@@ -110,6 +174,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &ecspi1 {
 	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -129,26 +200,61 @@
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
 
-	touchscreen@0 {
-		compatible = "ti,tsc2046";
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
 		pinctrl-0 = <&pinctrl_tsc2046>;
-		pinctrl-names ="default";
-		spi-max-frequency = <100000>;
-		interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
-		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
 
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-		touchscreen-inverted-x;
-		touchscreen-inverted-y;
-		touchscreen-max-pressure = <4095>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 {
+			reg = <0>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@2 {
+			reg = <2>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
 
-		ti,vref-delay-usecs = /bits/ 16 <100>;
-		ti,x-plate-ohms = /bits/ 16 <800>;
-		ti,y-plate-ohms = /bits/ 16 <300>;
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
 
-		wakeup-source;
+		/* channel 6 is not connected */
+
+		channel@7 {
+			reg = <7>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
 	};
 };
 
@@ -156,10 +262,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rgmii_phy>;
 	status = "okay";
 
@@ -233,9 +335,10 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	temperature-sensor@70 {
+	tsens0: temperature-sensor@70 {
 		compatible = "ti,tmp103";
 		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts
index a35a1c66e770..5f4fa796ca18 100644
--- a/arch/arm/boot/dts/imx6dl-prtmvt.dts
+++ b/arch/arm/boot/dts/imx6dl-prtmvt.dts
@@ -51,98 +51,98 @@
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 		autorepeat;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		f1 {
+		key-f1 {
 			label = "GPIO Key F1";
 			linux,code = <KEY_F1>;
 			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
 		};
 
-		f2 {
+		key-f2 {
 			label = "GPIO Key F2";
 			linux,code = <KEY_F2>;
 			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
 		};
 
-		f3 {
+		key-f3 {
 			label = "GPIO Key F3";
 			linux,code = <KEY_F3>;
 			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
 		};
 
-		f4 {
+		key-f4 {
 			label = "GPIO Key F4";
 			linux,code = <KEY_F4>;
 			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
 		};
 
-		f5 {
+		key-f5 {
 			label = "GPIO Key F5";
 			linux,code = <KEY_F5>;
 			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
 		};
 
-		cycle {
+		key-cycle {
 			label = "GPIO Key CYCLE";
 			linux,code = <KEY_CYCLEWINDOWS>;
 			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
 		};
 
-		esc {
+		key-esc {
 			label = "GPIO Key ESC";
 			linux,code = <KEY_ESC>;
 			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
 		};
 
-		up {
+		key-up {
 			label = "GPIO Key UP";
 			linux,code = <KEY_UP>;
 			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
 		};
 
-		down {
+		key-down {
 			label = "GPIO Key DOWN";
 			linux,code = <KEY_DOWN>;
 			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
 		};
 
-		ok {
+		key-ok {
 			label = "GPIO Key OK";
 			linux,code = <KEY_OK>;
 			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
 		};
 
-		f6 {
+		key-f6 {
 			label = "GPIO Key F6";
 			linux,code = <KEY_F6>;
 			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
 		};
 
-		f7 {
+		key-f7 {
 			label = "GPIO Key F7";
 			linux,code = <KEY_F7>;
 			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
 		};
 
-		f8 {
+		key-f8 {
 			label = "GPIO Key F8";
 			linux,code = <KEY_F8>;
 			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
 		};
 
-		f9 {
+		key-f9 {
 			label = "GPIO Key F9";
 			linux,code = <KEY_F9>;
 			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
 		};
 
-		f10 {
+		key-f10 {
 			label = "GPIO Key F10";
 			linux,code = <KEY_F10>;
 			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
@@ -193,6 +193,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	reg_1v8: regulator-1v8 {
@@ -293,8 +294,10 @@
 };
 
 &clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>;
 };
 
 &ecspi1 {
@@ -314,10 +317,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rmii_phy>;
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts
index 5ac84445e9cc..56bb1ca56a2d 100644
--- a/arch/arm/boot/dts/imx6dl-prtrvt.dts
+++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts
@@ -67,11 +67,9 @@
 		ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
 				  <&gpio5 11 GPIO_ACTIVE_LOW>;
 		vin-supply = <&reg_3v3>;
-		vin-voltage-override = <3100000>;
 		autosuspend-delay = <30000>;
 		irq-status-read-quirk;
 		en2-rf-quirk;
-		t5t-rmb-extra-byte-quirk;
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index ae6da241f13e..a1eb53851794 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include "imx6dl.dtsi"
 #include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/display/sdtv-standards.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/sound/fsl-imx-audmux.h>
@@ -21,105 +22,131 @@
 
 	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm1 0 500000>;
+		pwms = <&pwm1 0 500000 0>;
 		brightness-levels = <0 20 81 248 1000>;
 		default-brightness-level = <20>;
 		num-interpolated-steps = <21>;
 		power-supply = <&reg_bl_12v0>;
-		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	display {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-0 = <&pinctrl_ipu1_disp>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>;
 	};
 
 	keys {
 		compatible = "gpio-keys";
 		autorepeat;
 
-		esc {
+		key-esc {
 			label = "GPIO Key ESC";
 			linux,code = <KEY_ESC>;
 			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
 		};
 
-		up {
+		key-up {
 			label = "GPIO Key UP";
 			linux,code = <KEY_UP>;
 			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
 		};
 
-		down {
+		key-down {
 			label = "GPIO Key DOWN";
 			linux,code = <KEY_DOWN>;
 			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
 		};
 
-		enter {
+		key-enter {
 			label = "GPIO Key Enter";
 			linux,code = <KEY_ENTER>;
 			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
 		};
 
-		cycle {
+		key-cycle {
 			label = "GPIO Key CYCLE";
 			linux,code = <KEY_CYCLEWINDOWS>;
 			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
 		};
 
-		f1 {
+		key-f1 {
 			label = "GPIO Key F1";
 			linux,code = <KEY_F1>;
 			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
 		};
 
-		f2 {
+		key-f2 {
 			label = "GPIO Key F2";
 			linux,code = <KEY_F2>;
 			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
 		};
 
-		f3 {
+		key-f3 {
 			label = "GPIO Key F3";
 			linux,code = <KEY_F3>;
 			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
 		};
 
-		f4 {
+		key-f4 {
 			label = "GPIO Key F4";
 			linux,code = <KEY_F4>;
 			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
 		};
 
-		f5 {
+		key-f5 {
 			label = "GPIO Key F5";
 			linux,code = <KEY_F5>;
 			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
 		};
 
-		f6 {
+		key-f6 {
 			label = "GPIO Key F6";
 			linux,code = <KEY_F6>;
 			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
 		};
 
-		f7 {
+		key-f7 {
 			label = "GPIO Key F7";
 			linux,code = <KEY_F7>;
 			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
 		};
 
-		f8 {
+		key-f8 {
 			label = "GPIO Key F8";
 			linux,code = <KEY_F8>;
 			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
 		};
 
-		f9 {
+		key-f9 {
 			label = "GPIO Key F9";
 			linux,code = <KEY_F9>;
 			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
 		};
 
-		f10 {
+		key-f10 {
 			label = "GPIO Key F10";
 			linux,code = <KEY_F10>;
 			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
@@ -138,6 +165,30 @@
 		};
 	};
 
+	panel {
+		compatible = "innolux,g070y2-t02";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	connector {
+		compatible = "composite-video-connector";
+		label = "Composite0";
+		sdtv-standards = <SDTV_STD_PAL_B>;
+
+		port {
+			comp0_out: endpoint {
+				remote-endpoint = <&tvp5150_comp0_in>;
+			};
+		};
+	};
+
 	reg_bl_12v0: regulator-bl-12v0 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -149,6 +200,13 @@
 		enable-active-high;
 	};
 
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_1v8: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "1v8";
@@ -182,6 +240,64 @@
 			frame-master;
 		};
 	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+		};
+
+		touch-thermal0 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+		};
+
+		touch-thermal1 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
 };
 
 &audmux {
@@ -223,6 +339,43 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_tsc>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
 };
 
 &i2c1 {
@@ -237,6 +390,31 @@
 		VDDIO-supply = <&reg_3v3>;
 		VDDD-supply = <&reg_1v8>;
 	};
+
+	video@5c {
+		compatible = "ti,tvp5150";
+		reg = <0x5c>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tvp5150_comp0_in: endpoint {
+				remote-endpoint = <&comp0_out>;
+			};
+		};
+
+		/* Output port 2 is video output pad */
+		port@2 {
+			reg = <2>;
+
+			tvp5151_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+			};
+		};
+	};
 };
 
 &i2c3 {
@@ -245,6 +423,12 @@
 		reg = <0x51>;
 	};
 
+	tsens0: temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	gpio_pca: gpio@74 {
 		compatible = "nxp,pca9539";
 		reg = <0x74>;
@@ -260,8 +444,15 @@
 	status = "okay";
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
+};
+
 &pwm1 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -276,8 +467,6 @@
 };
 
 &ssi1 {
-	#sound-dai-cells = <0>;
-	fsl,mode = "ac97-slave";
 	status = "okay";
 };
 
@@ -285,10 +474,6 @@
 	status = "disabled";
 };
 
-&vpu {
-	status = "disabled";
-};
-
 &iomuxc {
 	pinctrl_audmux: audmuxgrp {
 		fsl,pins = <
@@ -300,12 +485,6 @@
 		>;
 	};
 
-	pinctrl_backlight: backlightgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b0
-		>;
-	};
-
 	pinctrl_can1phy: can1phy {
 		fsl,pins = <
 			/* CAN1_SR */
diff --git a/arch/arm/boot/dts/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/imx6dl-qmx6.dtsi
new file mode 100644
index 000000000000..150d69858255
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-qmx6.dtsi
@@ -0,0 +1,612 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for i.MX6DL based congatec QMX6
+// System on Module
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+// Copyright 2016 congatec AG
+
+#include "imx6dl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	memory@10000000 {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_3p3v: 3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c2>;
+
+		i2c5: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c6: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+
+	audmux_ssi1 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT6) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT6) |
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT6)
+		>;
+	};
+
+	audmux_aud6 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT6>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&clks {
+	clocks = <&rtc_sqw>;
+	clock-names = "ckil";
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf032b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0000000 0x100000>;
+		};
+
+		partition@100000 {
+			label = "user";
+			reg = <0x0100000 0x2fc000>;
+		};
+
+		partition@3fc000 {
+			label = "reserved";
+			reg = <0x03fc000 0x4000>;
+			read-only;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	fsl,magic-packet;
+	phy-handle = <&phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@6 {
+			reg = <6>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	rtc: m41t62@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+
+		rtc_sqw: clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&i2c6 {
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/*
+			 * keep VGEN3, VGEN4 and VGEN5 enabled in order to
+			 * maintain backward compatibility with hw-rev. A.0
+			 */
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			/* supply voltage for eMMC */
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 20 0>;
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1c_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	/* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+};
+
+&usdhc2 {
+	/* MicroSD card slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc3 {
+	/* eMMC module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	bus-width = <8>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	qmx6mux: imx6qdl-qmx6 {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x110b0 /* Q7[67] HDA_SDO */
+				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x30b0 /* Q7[59] HDA_SYNC */
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x30b0 /* Q7[65] HDA_SDI */
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x30b0 /* Q7[63] HDA_BITCLK */
+			>;
+		};
+
+		/* PHY is on System on Module, Q7[3-15] have Ethernet lines */
+		pinctrl_enet: enet {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000 /* PCIE_WAKE_B */
+				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x80000000 /* I2C multiplexer */
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x80000000 /* SD4_CD# */
+				MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x80000000 /* SD4_WP */
+				MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x80000000 /* Camera MCLK */
+			>;
+		};
+
+		pinctrl_i2c1: i2c1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1 /* Q7[66] I2C_CLK */
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1 /* Q7[68] I2C_DAT */
+			>;
+		};
+
+		pinctrl_i2c1_gpio: i2c1-gpio {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x1b0b0 /* Q7[66] I2C_CLK */
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b0 /* Q7[68] I2C_DAT */
+			>;
+		};
+
+		pinctrl_i2c2: i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1 /* Q7[152] SDVO_CTRL_CLK */
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1 /* Q7[150] SDVO_CTRL_DAT */
+			>;
+		};
+
+		pinctrl_i2c2_gpio: i2c2-gpio {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0 /* Q7[152] SDVO_CTRL_CLK */
+				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x1b0b0 /* Q7[150] SDVO_CTRL_DAT */
+			>;
+		};
+
+		pinctrl_i2c3: i2c3 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1 /* Q7[60] SMB_CLK */
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1 /* Q7[62] SMB_DAT */
+			>;
+		};
+
+		pinctrl_i2c3_gpio: i2c3-gpio {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x1b0b0 /* Q7[60] SMB_CLK */
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0 /* Q7[62] SMB_DAT */
+			>;
+		};
+
+		pinctrl_phy_reset: phy-reset {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0 /* RGMII Phy Reset */
+			>;
+		};
+
+		pinctrl_pwm4: pwm4 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */
+			>;
+		};
+
+		pinctrl_q7_backlight_enable: q7-backlight-enable {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0 /* Q7[112] LVDS_BLEN */
+			>;
+		};
+
+		pinctrl_q7_gpio0: q7-gpio0 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0 /* Q7[185] GPIO0 */
+			>;
+		};
+
+		pinctrl_q7_gpio1: q7-gpio1 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0 /* Q7[186] GPIO1 */
+			>;
+		};
+
+		pinctrl_q7_gpio2: q7-gpio2 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b0 /* Q7[187] GPIO2 */
+			>;
+		};
+
+		pinctrl_q7_gpio3: q7-gpio3 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x1b0b0 /* Q7[188] GPIO3 */
+			>;
+		};
+
+		pinctrl_q7_gpio4: q7-gpio4 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* Q7[189] GPIO4 */
+			>;
+		};
+
+		pinctrl_q7_gpio5: q7-gpio5 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* Q7[190] GPIO5 */
+			>;
+		};
+
+		pinctrl_q7_gpio6: q7-gpio6 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b0 /* Q7[191] GPIO6 */
+			>;
+		};
+
+		pinctrl_q7_gpio7: q7-gpio7 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* Q7[192] GPIO7 */
+			>;
+		};
+
+		pinctrl_q7_hda_reset: q7-hda-reset {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0 /* Q7[61] HDA_RST_N */
+			>;
+		};
+
+		pinctrl_q7_lcd_power: lcd-power {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* Q7[111] LVDS_PPEN */
+			>;
+		};
+
+		pinctrl_q7_sdio_power: q7-sdio-power {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b0 /* Q7[47] SDIO_PWR# */
+			>;
+		};
+
+		pinctrl_q7_sleep_button: q7-sleep-button {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0 /* Q7[21] SLP_BTN# */
+			>;
+		};
+
+		pinctrl_q7_spi_cs1: spi-cs1 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b0 /* Q7[202] SPI_CS1# */
+			>;
+		};
+
+		/* SPI1 bus does not leave System on Module */
+		pinctrl_spi1: spi1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+			>;
+		};
+
+		/* Debug connector on Q7 module */
+		pinctrl_uart2: uart2 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1 /* Q7[177] UART0_RX */
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1 /* Q7[171] UART0_TX */
+			>;
+		};
+
+		pinctrl_usbotg: usbotg {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059 /* Q7[92] USB_ID */
+			>;
+		};
+
+		/* µSD card slot on Q7 module */
+		pinctrl_usdhc2: usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0 /* SD2_CD */
+			>;
+		};
+
+		/* eMMC module on Q7 module */
+		pinctrl_usdhc3: usdhc3 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059 /* Q7[45] SDIO_CMD */
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x17059 /* Q7[42] SDIO_CLK */
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059 /* Q7[48] SDIO_DAT1 */
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059 /* Q7[49] SDIO_DAT0 */
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059 /* Q7[50] SDIO_DAT3 */
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059 /* Q7[51] SDIO_DAT2 */
+			>;
+		};
+
+		pinctrl_wdog: wdog {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0 /* Watchdog output signal */
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts
index 0f1616bfa9a8..b72f8ea1e6f6 100644
--- a/arch/arm/boot/dts/imx6dl-rex-basic.dts
+++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts
@@ -19,7 +19,7 @@
 };
 
 &ecspi3 {
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 065d3ab0f50a..24c7f535f63b 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -25,14 +25,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
 			default-state = "off";
@@ -90,6 +90,7 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&rgmii_phy>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
@@ -106,6 +107,8 @@
 			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <1000>;
+			qca,smarteee-tw-us-1g = <24>;
+			qca,clk-out-frequency = <125000000>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts b/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
new file mode 100644
index 000000000000..b12b5aabe70a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+#include "imx6qdl-skov-revc-lt2.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU SoloCore";
+	compatible = "skov,imx6dl-skov-revc-lt2", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts b/arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts
new file mode 100644
index 000000000000..5dcc433fe2af
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU SoloCore";
+	compatible = "skov,imx6dl-skov-revc-lt6", "fsl,imx6dl";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	display {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "logictechno,lttd800480070-l6wh-rt";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-solidsense.dts b/arch/arm/boot/dts/imx6dl-solidsense.dts
new file mode 100644
index 000000000000..2a3699adbed0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-solidsense.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-solidsense.dtsi"
+
+/ {
+	model = "SolidRun SolidSense Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,solidsense/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
index d37ba4ed847d..23274be08e61 100644
--- a/arch/arm/boot/dts/imx6dl-victgo.dts
+++ b/arch/arm/boot/dts/imx6dl-victgo.dts
@@ -5,60 +5,27 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/display/sdtv-standards.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/media/tvp5150.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
 #include "imx6dl.dtsi"
+#include "imx6qdl-vicut1.dtsi"
 
 / {
 	model = "Kverneland TGO";
 	compatible = "kvg,victgo", "fsl,imx6dl";
 
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		pwms = <&pwm1 0 5000000 0>;
-		brightness-levels = <0 16 64 255>;
-		num-interpolated-steps = <16>;
-		default-brightness-level = <1>;
-		power-supply = <&reg_3v3>;
-		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
-	};
-
-	connector {
-		compatible = "composite-video-connector";
-		label = "Composite0";
-		sdtv-standards = <SDTV_STD_PAL_B>;
-
-		port {
-			comp0_out: endpoint {
-				remote-endpoint = <&tvp5150_comp0_in>;
-			};
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 		autorepeat;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		enter {
+		key-enter {
 			label = "Rotary Key";
 			gpios = <&gpio2 05 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_ENTER>;
@@ -66,36 +33,14 @@
 		};
 	};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-0 {
-			label = "debug0";
-			function = LED_FUNCTION_HEARTBEAT;
-			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-1 {
-			label = "debug1";
-			function = LED_FUNCTION_DISK;
-			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "disk-activity";
-		};
-
-		led-2 {
-			label = "power_led";
-			function = LED_FUNCTION_POWER;
-			gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>;
 	};
 
 	panel {
-		compatible = "kyo,tcg121xglp";
-		backlight = <&backlight>;
+		compatible = "lg,lb070wv8";
+		backlight = <&backlight_lcd>;
 		power-supply = <&reg_3v3>;
 
 		port {
@@ -109,38 +54,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
-	};
-
-	reg_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_h1_vbus: regulator-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "h1-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_otg_vbus: regulator-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "otg-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		clock-output-names = "enet_ref_pad";
 	};
 
 	rotary-encoder {
@@ -155,87 +69,77 @@
 		wakeup-source;
 	};
 
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "prti6q-sgtl5000";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,widgets =
-			"Microphone", "Microphone Jack",
-			"Line", "Line In Jack",
-			"Headphone", "Headphone Jack",
-			"Speaker", "External Speaker";
-		simple-audio-card,routing =
-			"MIC_IN", "Microphone Jack",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"External Speaker", "LINE_OUT";
-
-		simple-audio-card,cpu {
-			sound-dai = <&ssi1>;
-			system-clock-frequency = <0>;
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
 		};
 
-		simple-audio-card,codec {
-			sound-dai = <&codec>;
-			bitclock-master;
-			frame-master;
+		touch-thermal0 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+		};
+
+		touch-thermal1 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
 		};
 	};
-};
 
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
 
-	mux-ssi1 {
-		fsl,audmux-port = <0>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN		0
-			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
-			IMX_AUDMUX_V2_PTCR_TFSDIR	0
-			IMX_AUDMUX_V2_PTCR_TCLKDIR	IMX_AUDMUX_V2_PDCR_RXDSEL(2)
-		>;
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
 	};
 
-	mux-pins3 {
-		fsl,audmux-port = <2>;
-		fsl,port-config = <
-			IMX_AUDMUX_V2_PTCR_SYN		IMX_AUDMUX_V2_PDCR_RXDSEL(0)
-			0				IMX_AUDMUX_V2_PDCR_TXRXEN
-		>;
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
 	};
-};
 
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
 
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
+	vdiv_hitch_pos: voltage-divider-hitch-pos {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 6>;
+		output-ohms = <3300>;
+		full-ohms = <13300>;
+		#io-channel-cells = <0>;
+	};
 };
 
 &clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-	};
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
 };
 
 &ecspi2 {
@@ -244,22 +148,41 @@
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
 
-	touchscreen@0 {
-		compatible = "ti,tsc2046";
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
-		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_touchscreen>;
-		spi-max-frequency = <200000>;
-		interrupts-extended = <&gpio5 8 IRQ_TYPE_EDGE_FALLING>;
-		pendown-gpio = <&gpio5 8 GPIO_ACTIVE_LOW>;
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-		touchscreen-inverted-y;
-		touchscreen-max-pressure = <4095>;
-		ti,vref-delay-usecs = /bits/ 16 <100>;
-		ti,x-plate-ohms = /bits/ 16 <800>;
-		ti,y-plate-ohms = /bits/ 16 <300>;
-		wakeup-source;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
 	};
 };
 
@@ -267,10 +190,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clk50m_phy>;
-	clock-names = "ipg", "ahb", "ptp";
 	phy-handle = <&rmii_phy>;
 	status = "okay";
 
@@ -295,36 +214,19 @@
 			"CAM2_MIRROR", "", "", "SMBALERT",
 		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
 		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
-			"SD1_DATA3", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
-			"BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
-		"", "", "", "", "", "", "ISB_IN1", "ON_SWITCH",
-		"POWER_LED", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
-			"CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ",
-		"TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
-			"YACO_RESET";
+			"SD1_DATA3", "ETH_MDIO", "",
+		"", "", "", "", "", "", "", "ETH_MDC";
 };
 
 &gpio4 {
 	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX",
-		"", "", "DIP1_FB", "", "VCAM_EN", "", "", "",
-		"CPU_LIGHT_ON", "", "ETH_RESET", "CPU_CONTACT_IN", "BL_EN",
-			"BL_PWM", "ETH_INTRP", "ISB_LED";
+		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
+			"CAN2_SR", "CAN2_TX", "CAN2_RX",
+		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
+			"HITCH_IN_OUT",
+		"LIGHT_ON", "", "ETH_RESET", "CONTACT_IN", "BL_EN",
+			"BL_PWM", "ETH_INT", "ISB_LED";
 };
 
 &gpio5 {
@@ -332,51 +234,22 @@
 		"", "", "", "", "", "", "", "",
 		"TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO",
 			"ECSPI2_SS0", "ECSPI2_SCLK", "", "",
-		"", "", "", "", "", "", "", "",
+		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
+			"I2S_BITCLK", "I2S_DOUT",
 		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
 			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
 };
 
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: audio-codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0xa>;
-		#sound-dai-cells = <0>;
-		clocks = <&clks 201>;
-		VDDA-supply = <&reg_3v3>;
-		VDDIO-supply = <&reg_3v3>;
-		VDDD-supply = <&reg_1v8>;
-	};
-
-	video-decoder@5c {
-		compatible = "ti,tvp5150";
-		reg = <0x5c>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			tvp5150_comp0_in: endpoint {
-				remote-endpoint = <&comp0_out>;
-			};
-		};
-
-		/* Output port 2 is video output pad */
-		port@2 {
-			reg = <2>;
-
-			tvp5151_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-			};
-		};
-	};
+&gpio6 {
+	gpio-line-names =
+		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
+			"ITU656_D6", "ITU656_D7", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
 
+&i2c1 {
 	keypad@70 {
 		compatible = "holtek,ht16k33";
 		pinctrl-names = "default";
@@ -400,224 +273,9 @@
 			MATRIX_KEY(6, 1, KEY_F1)
 		      >;
 	};
-
-	/* additional i2c devices are added automatically by the boot loader */
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	adc@49 {
-		compatible = "ti,ads1015";
-		reg = <0x49>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@4 {
-			reg = <4>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@5 {
-			reg = <5>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@6 {
-			reg = <6>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-
-		channel@7 {
-			reg = <7>;
-			ti,gain = <3>;
-			ti,datarate = <3>;
-		};
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	temperature-sensor@70 {
-		compatible = "ti,tmp103";
-		reg = <0x70>;
-	};
-};
-
-&ipu1_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu1_csi0>;
-	status = "okay";
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
-	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@4 {
-			reg = <4>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&ssi1 {
-	#sound-dai-cells = <0>;
-	fsl,mode = "ac97-slave";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_h1_vbus>;
-	pinctrl-names = "default";
-	phy_type = "utmi";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	disable-wp;
-	cap-sd-highspeed;
-	no-mmc;
-	no-sdio;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	no-sd;
-	no-sdio;
-	status = "okay";
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1			0x030b0
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x130b0
-		>;
-	};
-
-	pinctrl_backlight: backlightgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28		0x1b0b0
-		>;
-	};
-
-	pinctrl_can1: can1grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
-			/* CAN1_SR */
-			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
-			/* CAN1_TERM */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1b088
-		>;
-	};
-
-	pinctrl_can2: can2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
-			/* CAN2_SR */
-			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13008
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x100b1
-			/* CS */
-			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x000b1
-		>;
-	};
-
 	pinctrl_ecspi2: ecspi2grp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI		0x100b1
@@ -656,113 +314,12 @@
 		>;
 	};
 
-	pinctrl_hog: hoggrp {
-		fsl,pins = <
-			/* ITU656_nRESET */
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02			0x1b0b0
-			/* CAM1_MIRROR */
-			MX6QDL_PAD_GPIO_3__GPIO1_IO03			0x130b0
-			/* CAM2_MIRROR */
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04			0x130b0
-			/* CAM_nDETECT */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b0
-			/* ISB_IN1 */
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x130b0
-			/* ISB_nIN2 */
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21			0x1b0b0
-			/* WARN_LIGHT */
-			MX6QDL_PAD_EIM_A19__GPIO2_IO19			0x100b0
-			/* ON2_FB */
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02			0x100b0
-			/* YACO_nIRQ */
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x1b0b0
-			/* YACO_BOOT0 */
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30			0x130b0
-			/* YACO_nRESET */
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31			0x1b0b0
-			/* FORCE_ON1 */
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30			0x1b0b0
-			/* AUDIO_nRESET */
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21		0x1f0b0
-			/* ITU656_nPDN */
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b0b0
-
-			/* HW revision detect */
-			/* REV_ID0 */
-			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08			0x1b0b0
-			/* REV_ID1 is shared with PWM3 */
-			/* REV_ID2 */
-			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10			0x1b0b0
-			/* REV_ID3 */
-			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11			0x1b0b0
-			/* REV_ID4 */
-			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12			0x1b0b0
-
-			/* New in HW revision 1 */
-			/* ON1_FB */
-			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x100b0
-			/* DIP1_FB */
-			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18			0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
-		>;
-	};
-
 	pinctrl_keypad: keypadgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_19__GPIO4_IO05			0x1b0b0
 		>;
 	};
 
-	pinctrl_leds: ledsgrp {
-		fsl,pins = <
-			/* DEBUG0 */
-			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16		0x1b0b0
-			/* DEBUG1 */
-			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17		0x1b0b0
-			/* POWER_LED */
-			MX6QDL_PAD_EIM_CS1__GPIO2_IO24			0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x1b0b0
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT			0x1b0b0
-		>;
-	};
-
 	pinctrl_rotary_ch: rotarychgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D3__GPIO2_IO03			0x1b0b0
@@ -776,77 +333,4 @@
 			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09		0x1b0b0
 		>;
 	};
-
-	/* YaCO AUX Uart */
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
-		>;
-	};
-
-	/* YaCO Touchscreen UART */
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
-			/* power enable, high active */
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
-			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
-			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
-			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
-		>;
-	};
 };
diff --git a/arch/arm/boot/dts/imx6dl-vicut1.dts b/arch/arm/boot/dts/imx6dl-vicut1.dts
index 174fd913bf96..5035d303447d 100644
--- a/arch/arm/boot/dts/imx6dl-vicut1.dts
+++ b/arch/arm/boot/dts/imx6dl-vicut1.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include "imx6dl.dtsi"
 #include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
 
 / {
 	model = "Kverneland UT1 Board";
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 7d2c72562c73..3be38a3c4bb1 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -5,12 +5,15 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {
 	aliases: aliases {
 		ethernet1 = &eth1;
 		ethernet2 = &eth2;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
 	};
 
 	backlight: backlight {
@@ -52,6 +55,7 @@
 	panel: panel {
 		compatible = "dataimage,scf0700c48ggu18";
 		power-supply = <&sw2_reg>;
+		backlight = <&backlight>;
 		status = "disabled";
 
 		port {
@@ -94,7 +98,6 @@
 		regulator-max-microvolt = <5000000>;
 		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-		status = "okay";
 	};
 };
 
@@ -102,12 +105,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <20>;
 	phy-supply = <&sw2_reg>;
-	phy-handle = <&ethphy0>;
 	status = "okay";
 
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -123,6 +128,7 @@
 		switch@10 {
 			compatible = "qca,qca8334";
 			reg = <10>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
 				#address-cells = <1>;
@@ -262,36 +268,32 @@
 		compatible = "ti,lp5562";
 		reg = <0x30>;
 		clock-mode = /bits/ 8 <1>;
-		status = "disabled";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 
-		chan@0 {
+		led@0 {
 			chan-name = "R";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
 		};
 
-		chan@1 {
+		led@1 {
 			chan-name = "G";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
 		};
 
-		chan@2 {
+		led@2 {
 			chan-name = "B";
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <2>;
-		};
-
-		chan@3 {
-			chan-name = "W";
-			led-cur = /bits/ 8 <0x0>;
-			max-cur = /bits/ 8 <0x0>;
-			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
 		};
 	};
 
@@ -299,7 +301,6 @@
 		compatible = "atmel,24c128";
 		reg = <0x57>;
 		pagesize = <64>;
-		status = "okay";
 	};
 
 	touchscreen: touchscreen@5c {
@@ -309,7 +310,7 @@
 		interrupt-parent = <&gpio4>;
 		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 		attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
-		reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 		touchscreen-size-x = <800>;
 		touchscreen-size-y = <480>;
 		status = "disabled";
@@ -341,6 +342,7 @@
 		solomon,height = <64>;
 		solomon,width = <128>;
 		solomon,page-offset = <0>;
+		solomon,col-offset = <4>;
 		solomon,prechargep2 = <15>;
 		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
 		vbat-supply = <&sw2_reg>;
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts b/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts
new file mode 100644
index 000000000000..5c2cd517589b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Lynx i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-lynx", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcd_display {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchscreen {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts b/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts
new file mode 100644
index 000000000000..e0292f11d03e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Phoenix i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-phoenix", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&aliases {
+	/delete-property/ ethernet1;
+};
+
+&gpio_keys {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&switch_ports {
+	/delete-node/ port@2;
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi
new file mode 100644
index 000000000000..52a0f6ee426f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases: aliases {
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 32 64 128 255>;
+		default-brightness-level = <32>;
+		num-interpolated-steps = <8>;
+		power-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		status = "disabled";
+
+		button {
+			label = "Factory RESET";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		compatible = "dataimage,scf0700c48ggu18";
+		power-supply = <&sw2_reg>;
+		backlight = <&backlight>;
+		enable-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&sw2_reg>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+
+			switch_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethphy0: port@0 {
+					reg = <0>;
+					label = "cpu";
+					phy-mode = "rgmii-id";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				eth2: port@1 {
+					reg = <1>;
+					label = "eth2";
+					phy-handle = <&phy_port1>;
+				};
+
+				eth1: port@2 {
+					reg = <2>;
+					label = "eth1";
+					phy-handle = <&phy_port2>;
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port1: switchphy@11 {
+					reg = <0x11>;
+				};
+
+				phy_port2: switchphy@12 {
+					reg = <0x12>;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze200";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vsnvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	leds: led-controller@30 {
+		compatible = "ti,lp5562";
+		reg = <0x30>;
+		clock-mode = /bits/ 8 <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		led@0 {
+			chan-name = "R";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			chan-name = "G";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@2 {
+			chan-name = "B";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <64>;
+	};
+
+	touchscreen: touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		reg = <0x5c>;
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		status = "disabled";
+	};
+
+	rtc: rtc@68 {
+		compatible = "dallas,ds1341";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+
+	oled_1309: oled@3c {
+		compatible = "solomon,ssd1309fb-i2c";
+		reg = <0x3c>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,segment-no-remap;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	oled_1305: oled@3d {
+		compatible = "solomon,ssd1305fb-i2c";
+		reg = <0x3d>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,col-offset = <4>;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	gpio_oled: gpio@41 {
+		compatible = "nxp,pca9536";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x41>;
+		vcc-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	touchkeys: keys@5a {
+		compatible = "fsl,mpr121-touchkey";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchkeys>;
+		reg = <0x5a>;
+		vdd-supply = <&sw2_reg>;
+		autorepeat;
+		linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>,
+				<KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>,
+				<KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>;
+		poll-interval = <50>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b020
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b020
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b020
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b020
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b020
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b020
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b020
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b020
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b020
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b020
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b020
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b020
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b020
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b010
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b010
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b098
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b899
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b899
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07                  0x1b0b0
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b098
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x8
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x1b098
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b098
+		>;
+	};
+
+	pinctrl_touchkeys: touchkeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b098
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b098
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0a8
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0a8
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b098
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__USB_H1_OC	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbus {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x98
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b098
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b098
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotg-vbus {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x98
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x1f069
+			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x10069
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17069
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17069
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17069
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17069
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17069
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17069
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17069
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17069
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B	0x1b0b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	over-current-active-low;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	over-current-active-low;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+	status = "okay";
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <109>;
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	vmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index fdd81fdc3f35..dc919e09a505 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -80,10 +80,13 @@
 		};
 	};
 
-	soc {
+	soc: soc {
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
index a0683b4aeca1..3fc079dfd61e 100644
--- a/arch/arm/boot/dts/imx6q-apalis-eval.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  */
@@ -30,89 +30,26 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-		power-supply = <&reg_3v3_sw>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
 	reg_pcie_switch: regulator-pcie-switch {
 		compatible = "regulator-fixed";
-		regulator-name = "pcie_switch";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+		enable-active-high;
 		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "pcie_switch";
 		startup-delay-us = <100000>;
-		enable-active-high;
 		status = "okay";
 	};
 
 	reg_3v3_sw: regulator-3v3-sw {
 		compatible = "regulator-fixed";
-		regulator-name = "3.3V_SW";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_SW";
 	};
 };
 
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	power-supply = <&reg_3v3_sw>;
-	status = "okay";
-};
-
 &can1 {
 	xceiver-supply = <&reg_3v3_sw>;
 	status = "okay";
@@ -123,27 +60,10 @@
 	status = "okay";
 };
 
-&hdmi {
-	status = "okay";
-};
-
 /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
 &i2c1 {
 	status = "okay";
 
-	/*
-	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
-	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
-	 */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
-		status = "disabled";
-	};
-
 	pcie-switch@58 {
 		compatible = "plx,pex8605";
 		reg = <0x58>;
@@ -164,14 +84,6 @@
 	status = "okay";
 };
 
-&ipu1_di1_disp1 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-};
-
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_reset_moci>;
@@ -198,11 +110,11 @@
 	status = "okay";
 };
 
-&reg_usb_otg_vbus {
+&reg_usb_host_vbus {
 	status = "okay";
 };
 
-&reg_usb_host_vbus {
+&reg_usb_otg_vbus {
 	status = "okay";
 };
 
@@ -235,39 +147,26 @@
 };
 
 &usbh1 {
+	disable-over-current;
 	vbus-supply = <&reg_usb_host_vbus>;
 	status = "okay";
 };
 
 &usbotg {
+	disable-over-current;
 	vbus-supply = <&reg_usb_otg_vbus>;
 	status = "okay";
 };
 
 /* MMC1 */
 &usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
-	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 /* SD1 */
 &usdhc2 {
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
-
-&iomuxc {
-	/*
-	 * Mux the Apalis GPIOs
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
-		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
-		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
-		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
-		    >;
-};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
index 86e84781cf5d..44637d606e61 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
@@ -1,274 +1,37 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  */
 
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q.dtsi"
-#include "imx6qdl-apalis.dtsi"
+#include "imx6q-apalis-ixora-v1.2.dts"
 
 / {
 	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1";
-	compatible = "toradex,apalis_imx6q-ixora-v1.1",
-		     "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
+	compatible = "toradex,apalis_imx6q-ixora-v1.1", "toradex,apalis_imx6q",
 		     "fsl,imx6q";
 
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c3;
-		i2c2 = &i2c2;
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
 
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds_ixora>;
-
-		led4-green {
-			label = "LED_4_GREEN";
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		led4-red {
-			label = "LED_4_RED";
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		led5-green {
-			label = "LED_5_GREEN";
-			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		led5-red {
-			label = "LED_5_RED";
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	status = "okay";
-};
+/delete-node/ &eeprom;
+/delete-node/ &reg_3v3_vmmc;
+/delete-node/ &reg_can1_supply;
+/delete-node/ &reg_can2_supply;
 
 &can1 {
-	status = "okay";
+	/delete-property/ xceiver-supply;
 };
 
 &can2 {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	status = "okay";
-
-	/*
-	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
-	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
-	 */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
-		status = "disabled";
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	status = "okay";
-};
-
-&ipu1_di1_disp1 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_moci>;
-	/* active-high meaning opposite of regular PERST# active-low polarity */
-	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_otg_vbus {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sound_spdif {
-	status = "okay";
-};
-
-&spdif {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	status = "okay";
+	/delete-property/ xceiver-supply;
 };
 
 /* MMC1 */
 &usdhc1 {
+	/delete-property/ cap-power-off-card;
+	/delete-property/ pinctrl-1;
+	/delete-property/ vmmc-supply;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
-	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&iomuxc {
-	/*
-	 * Mux the Apalis GPIOs
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
-		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
-		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
-		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
-		    >;
-
-	pinctrl_leds_ixora: ledsixoragrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
-			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
-		>;
-	};
 };
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts
new file mode 100644
index 000000000000..717decda0ceb
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.2";
+	compatible = "toradex,apalis_imx6q-ixora-v1.2", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		led4-green {
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_GREEN";
+		};
+
+		led4-red {
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_RED";
+		};
+
+		led5-green {
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_GREEN";
+		};
+
+		led5-red {
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_RED";
+		};
+	};
+
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+		startup-delay-us = <100>;
+	};
+
+	reg_can1_supply: regulator-can1-supply {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		regulator-name = "can1_supply";
+	};
+
+	reg_can2_supply: regulator-can2-supply {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can2_power>;
+		regulator-name = "can2_supply";
+	};
+};
+
+&can1 {
+	xceiver-supply = <&reg_can1_supply>;
+	status = "okay";
+};
+
+&can2 {
+	xceiver-supply = <&reg_can2_supply>;
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart24_forceoff>;
+
+	/*
+	 * uart-2-4-on-x21-enable-hog enables the UART transceiver for Apalis
+	 * UART2 and UART3. If one wants to disable the transceiver force
+	 * the GPIO to output-low, if one wants to control the transceiver
+	 * from user space delete the hog node.
+	 */
+	uart-2-4-on-x21-enable-hog {
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>; /* MXM3 180 */
+		output-high;
+	};
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_4bit_sleep &pinctrl_mmc_cd_sleep>;
+	bus-width = <4>;
+	cap-power-off-card;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can2_power: enablecan2powergrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart24_forceoff: uart24forceoffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0
+		>;
+	};
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_mmc_cd_sleep: mmccdslpgrp {
+		fsl,pins = <
+			 /* MMC1 CD */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0
+		>;
+	};
+
+	pinctrl_usdhc1_4bit_sleep: usdhc1-4bitslpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD     0x3000
+			MX6QDL_PAD_SD1_CLK__SD1_CLK     0x3000
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0  0x3000
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1  0x3000
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2  0x3000
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3  0x3000
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 62e72773e53b..f338be435277 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  */
@@ -30,95 +30,33 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
-
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_leds_ixora>;
 
 		led4-green {
-			label = "LED_4_GREEN";
 			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_GREEN";
 		};
 
 		led4-red {
-			label = "LED_4_RED";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_RED";
 		};
 
 		led5-green {
-			label = "LED_5_GREEN";
 			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_GREEN";
 		};
 
 		led5-red {
-			label = "LED_5_RED";
 			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_RED";
 		};
 	};
 };
 
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	status = "okay";
-};
-
 &can1 {
 	status = "okay";
 };
@@ -127,27 +65,10 @@
 	status = "okay";
 };
 
-&hdmi {
-	status = "okay";
-};
-
 /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
 &i2c1 {
 	status = "okay";
 
-	/*
-	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
-	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
-	 */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		reg = <0x4a>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */
-		status = "disabled";
-	};
-
 	eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -168,14 +89,6 @@
 	status = "okay";
 };
 
-&ipu1_di1_disp1 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-};
-
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_reset_moci>;
@@ -201,11 +114,11 @@
 	status = "okay";
 };
 
-&reg_usb_otg_vbus {
+&reg_usb_host_vbus {
 	status = "okay";
 };
 
-&reg_usb_host_vbus {
+&reg_usb_otg_vbus {
 	status = "okay";
 };
 
@@ -238,32 +151,26 @@
 };
 
 &usbh1 {
+	disable-over-current;
 	vbus-supply = <&reg_usb_host_vbus>;
 	status = "okay";
 };
 
 &usbotg {
+	disable-over-current;
 	vbus-supply = <&reg_usb_otg_vbus>;
 	status = "okay";
 };
 
 /* SD1 */
 &usdhc2 {
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &iomuxc {
-	/* Mux the Apalis GPIOs */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
-		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
-		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
-		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
-		    >;
-
 	pinctrl_leds_ixora: ledsixoragrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 0b40f52268b3..75586299d9ca 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -178,6 +178,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
index 604f2420370f..d994b32ad825 100644
--- a/arch/arm/boot/dts/imx6q-b450v3.dts
+++ b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -84,6 +84,11 @@
 };
 
 &pca9539 {
+	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+			  "", "SM_D_ACT", "DP1_RST#", "",
+			  "WD15S_EN", "WD15S_DIS#", "", "",
+			  "", "", "", "";
+
 	P04-hog {
 		gpio-hog;
 		gpios = <4 0>;
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
index 56d2aeb1900c..fa1a1df37cde 100644
--- a/arch/arm/boot/dts/imx6q-b650v3.dts
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -84,6 +84,11 @@
 };
 
 &pca9539 {
+	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+			  "", "SM_D_ACT", "DP1_RST#", "",
+			  "WD15S_EN", "WD15S_DIS#", "", "",
+			  "", "", "", "";
+
 	P07-hog {
 		gpio-hog;
 		gpios = <7 0>;
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
index 3d6b757bf325..db8c332df6a1 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -199,6 +199,11 @@
 };
 
 &pca9539 {
+	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+			  "REMOTE_ON_PML#", "SM_D_ACT", "DP1_RST#", "DP2_RST#",
+			  "", "", "", "",
+			  "", "", "", "";
+
 	P10-hog {
 		gpio-hog;
 		gpios = <8 0>;
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index e4578ed3371e..f266f1b7e0cf 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -124,6 +124,9 @@
 		regulator-name = "usb_otg_vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 };
 
@@ -139,7 +142,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: n25q032@0 {
+	flash: flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -172,7 +175,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
+	phy-supply = <&reg_3p3v>;
+	phy-handle = <&phy0>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &hdmi {
@@ -575,6 +590,12 @@
 		>;
 	};
 
+	pinctrl_usbotg_vbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+		>;
+	};
+
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD2_CMD__SD2_CMD	0x17059
diff --git a/arch/arm/boot/dts/imx6q-bosch-acc.dts b/arch/arm/boot/dts/imx6q-bosch-acc.dts
new file mode 100644
index 000000000000..8263bfef9bf8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-bosch-acc.dts
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for the i.MX6-based Bosch ACC board.
+ *
+ * Copyright (C) 2016 Garz & Fricke GmbH
+ * Copyright (C) 2018 DENX Software Engineering GmbH, Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2018 DENX Software Engineering GmbH, Niel Fourie <lusus@denx.de>
+ * Copyright (C) 2019-2021 Bosch Thermotechnik GmbH, Matthias Winker <matthias.winker@bosch.com>
+ * Copyright (C) 2022 DENX Software Engineering GmbH, Philip Oberfichtner <pro@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Bosch ACC";
+	compatible = "bosch,imx6q-acc", "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc4;
+		mmc1 = &usdhc2;
+		serial0 = &uart2;
+		serial1 = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 200000>;
+		brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>;
+		num-interpolated-steps = <10>;
+		default-brightness-level = <60>;
+		power-supply = <&reg_lcd>;
+	};
+
+	panel {
+		compatible = "dataimage,fg1001l0dsswmg01";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	refclk: refclk {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "12mhz_refclk";
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+				  <&clks IMX6QDL_CLK_CKO2>,
+				  <&clks IMX6QDL_CLK_CKO2_SEL>;
+		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>,
+					 <&clks IMX6QDL_CLK_CKO2_PODF>,
+					 <&clks IMX6QDL_CLK_OSC>;
+		assigned-clock-rates = <0>, <12000000>, <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1225000
+				852000  1225000
+				792000  1150000
+				396000  950000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1225000
+				996000	1175000
+				852000	1175000
+				792000	1150000
+				396000	1150000
+			>;
+		};
+
+		cpu1: cpu@1 {
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1225000
+				852000  1225000
+				792000  1150000
+				396000  950000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1225000
+				996000	1175000
+				852000	1175000
+				792000	1150000
+				396000	1150000
+			>;
+		};
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led_red: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			max-brightness = <248>;
+			default-state = "off";
+			pwms = <&pwm2 0 500000>;
+		};
+
+		led_white: led-1 {
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <248>;
+			default-state = "off";
+			pwms = <&pwm3 0 500000>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reset_gpio_led>;
+
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_5p0: regulator-5p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5p0";
+	};
+
+	reg_vin: regulator-vin {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN";
+		regulator-min-microvolt = <4500000>;
+		regulator-max-microvolt = <4500000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_usb_h2_vbus: regulator-usb-h2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5p0> ;
+		regulator-always-on;
+	};
+
+	reg_vsnvs: regulator-vsnvs {
+		compatible = "regulator-fixed";
+		regulator-name = "VSNVS_3V0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD0 POWER";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_enable>;
+		gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_dac: regulator-dac {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_dac";
+		regulator-min-microvolt = <20000>;
+		regulator-max-microvolt = <20000>;
+		vin-supply = <&reg_5p0> ;
+		regulator-boot-on;
+	};
+
+	reg_sw4: regulator-sw4 {
+		compatible = "regulator-fixed";
+		regulator-name = "SW4_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_sys: regulator-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "SYS_4V2";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+};
+
+&reg_arm {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&reg_vsnvs>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&reg_vsnvs>;
+};
+
+&reg_vdd3p0 {
+	vin-supply = <&reg_vsnvs>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		<&clks IMX6QDL_CLK_ENET>,
+		<&clks IMX6QDL_CLK_ENET>,
+		<&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
+	phy-mode = "rmii";
+	phy-supply = <&reg_sw4>;
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+			smsc,disable-energy-detect;
+		};
+	};
+};
+
+&gpu_vg {
+	status = "disabled";
+};
+
+&gpu_2d {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1c_reg: sw1c {
+				regulator-name = "VDD_SOC (sw1abc)";
+				regulator-min-microvolt = <1275000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-name = "VDD_ARM (sw2)";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				compatible = "regulator-fixed";
+				regulator-name = "DDR_1V5a";
+				regulator-boot-on;
+				regulator-always-on;
+
+			};
+
+			sw3b_reg: sw3b {
+				compatible = "regulator-fixed";
+				regulator-name = "DDR_1V5b";
+				regulator-boot-on;
+				regulator-always-on;
+
+			};
+
+			sw4_reg: sw4 {
+				regulator-name = "AUX 3V15 (sw4)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+				status = "disabled";
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	lm75: sensor@49 {
+		compatible = "national,lm75b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lm75>;
+		reg = <0x49>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@51 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom_ext: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	usb3503: usb@8 {
+		compatible = "smsc,usb3503";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb3503>;
+		reg = <0x08>;
+		connect-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* Old: 0, SS: HIGH */
+		intn-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; /* Old: 1, SS: HIGH */
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* Old: 0, SS: HIGH */
+		initial-mode = <1>;
+		clocks = <&refclk>;
+		clock-names = "refclk";
+		refclk-frequency = <12000000>;
+	};
+
+	exc3000: touchscreen@2a {
+		compatible = "eeti,exc3000";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctouch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+	};
+
+	vcnl4035: light-sensor@60 {
+		compatible = "vishay,vcnl4035";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_proximity>;
+		reg = <0x60>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "idle", "active";
+	pinctrl-0 = <&pinctrl_usbh2_idle>;
+	pinctrl-1 = <&pinctrl_usbh2_active>;
+	vbus-supply = <&reg_usb_h2_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	disable-over-current;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphynop1 {
+	clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+	clock-names = "main_clk";
+	vcc-supply = <&reg_usb_h1_vbus>;
+};
+
+&usbphynop2 {
+	vcc-supply = <&reg_usb_h2_vbus>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	voltage-ranges = <3300 3300>;
+	vmmc-supply = <&reg_sw4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	voltage-ranges = <3300 3300>;
+	vmmc-supply = <&reg_sw4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
+	timeout-sec = <10>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0	/* FEC INT */
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x0001b098
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x0001b098
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x0001b098
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_reset_gpio_led: reset-gpio-led-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b810
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b810
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_lcd_enable: lcdenablegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x1b0b0 /* lcd enable */
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x1b0b0 /* sel6_8 */
+		>;
+	};
+
+	pinctrl_lm75: lm75grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_proximity: proximitygrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_rtc: rtc-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 /* RTC INT */
+		>;
+	};
+
+	pinctrl_ctouch: ctouch-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* CTOUCH_INT */
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x0001b0b0 /* CTOUCH_RESET */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x0001b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh2_idle: usbh2-idle-grp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x00013018
+			MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00013018
+		>;
+	};
+
+	pinctrl_usbh2_active: usbh2-active-grp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x00013018
+			MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00017018
+		>;
+	};
+
+	pinctrl_usb3503: usb3503-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1    0x00000018
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12     0x1b0b0 /* USB INT */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0001b0b0 /* USB Reset */
+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16    0x1b0b0 /* USB Connect */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x00017069
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x00010038
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017069
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017069
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017069
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017069
+			MX6QDL_PAD_GPIO_4__SD2_CD_B    0x0001b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x00017059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x00010059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x00017059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x00017059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x00017059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x00017059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x00017059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x00017059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x00017059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x00017059
+		>;
+	};
+
+	pinctrl_wdog1: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index 2a98cc657595..ead83091e193 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -160,7 +160,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: m25p80@0 {
+	m25_eeprom: flash@0 {
 		compatible = "atmel,at25";
 		spi-max-frequency = <10000000>;
 		size = <0x8000>;
@@ -173,8 +173,8 @@
 &i2c1 {
 	pinctrl-names = "default", "gpio";
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	sda-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	pca9547: mux@70 {
 		compatible = "nxp,pca9547";
@@ -315,15 +315,15 @@
 &i2c2 {
 	pinctrl-names = "default", "gpio";
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 };
 
 &i2c3 {
 	pinctrl-names = "default", "gpio";
 	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 };
 
 &iomuxc {
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index bfb530f29d9d..1ad41c944b4b 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -260,7 +260,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
index a685b1c3208f..d4d57370615d 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
@@ -1,269 +1,25 @@
-// SPDX-License-Identifier: (GPL-2.0+)
+// SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright (C) 2015 DH electronics GmbH
+ * Copyright (C) 2015-2021 DH electronics GmbH
  * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6Q-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCOM PCB number: 493-300 or newer
+ * PDK2 PCB number: 516-400 or newer
  */
-
 /dts-v1/;
 
-#include "imx6q-dhcom-som.dtsi"
+#include "imx6q.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-pdk2.dtsi"
 
 / {
-	model = "Freescale i.MX6 Quad DHCOM Premium Developer Kit (2)";
-	compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	clk_ext_audio_codec: clock-codec {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-	};
-
-	display_bl: display-bl {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
-		default-brightness-level = <8>;
-		enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel {
-		compatible = "edt,etm0700g0edh6";
-		ddc-i2c-bus = <&i2c2>;
-		backlight = <&display_bl>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_ext>;
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "disabled";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		clocks = <&clk_ext_audio_codec>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&sw2_reg>;
-	};
-
-	touchscreen@38 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchscreen>;
-		compatible = "edt,edt-ft5406";
-		reg = <0x38>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_base &pinctrl_hog>;
-
-	pinctrl_hog: hog-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x400120b0
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x400120b0
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x400120b0
-			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x400120b0
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x400120b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x120b0
-			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x400120b0
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x400120b0
-			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x400120b0
-			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x400120b0
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x400120b0
-			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x400120b0
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x400120b0
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x400120b0
-			MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0x400120b0
-			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16		0x400120b0
-			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x400120b0
-			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19		0x400120b0
-			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x400120b0
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x400120b0
-			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x400120b0
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x400120b0
-		>;
-	};
-
-	pinctrl_audmux_ext: audmux-ext-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-		>;
-	};
-
-	pinctrl_enet_1G: enet-1G-grp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x000b0
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x000b1
-			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x000b1
-		>;
-	};
-
-	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
-			MX6QDL_PAD_EIM_D27__GPIO3_IO27			0x120b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_touchscreen: touchscreen-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b1
-		>;
-	};
-
-	pinctrl_pcie: pcie-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1
-		>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
+	model = "DH electronics i.MX6Q DHCOM on Premium Developer Kit (2)";
+	compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som",
+		     "fsl,imx6q";
 };
 
 &sata {
 	status = "okay";
 };
-
-&usdhc3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
deleted file mode 100644
index 236fc205c389..000000000000
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ /dev/null
@@ -1,475 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+)
-/*
- * Copyright (C) 2015 DH electronics GmbH
- * Copyright (C) 2018 Marek Vasut <marex@denx.de>
- */
-
-#include "imx6q.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/imx6qdl-clock.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	aliases {
-		mmc0 = &usdhc2;
-		mmc1 = &usdhc3;
-		mmc2 = &usdhc4;
-		mmc3 = &usdhc1;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_3p3v: regulator-3P3V {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash@0 {	/* S25FL116K */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-		m25p,fast-read;
-	};
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_100M>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {	/* SMSC LAN8710Ai */
-			reg = <0>;
-			max-speed = <100>;
-			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-			reset-delay-us = <1000>;
-			reset-post-delay-us = <1000>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic_hw300>;
-		reg = <0x3c>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <787500>;
-				regulator-max-microvolt = <1527272>;
-				lltc,fb-voltage-divider = <100000 110000>;
-				regulator-suspend-mem-microvolt = <1040000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1885714>;
-				regulator-max-microvolt = <3657142>;
-				lltc,fb-voltage-divider = <100000 28000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <787500>;
-				regulator-max-microvolt = <1527272>;
-				lltc,fb-voltage-divider = <100000 110000>;
-				regulator-suspend-mem-microvolt = <980000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <855571>;
-				regulator-max-microvolt = <1659291>;
-				lltc,fb-voltage-divider = <100000 93100>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo1_reg: ldo1 {
-				regulator-min-microvolt = <3240306>;
-				regulator-max-microvolt = <3240306>;
-				lltc,fb-voltage-divider = <102000 29400>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ldo2 {
-				regulator-min-microvolt = <2484708>;
-				regulator-max-microvolt = <2484708>;
-				lltc,fb-voltage-divider = <100000 41200>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	touchscreen@49 {	/* TSC2004 */
-		compatible = "ti,tsc2004";
-		reg = <0x49>;
-		vio-supply = <&reg_3p3v>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2004_hw300>;
-		interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>;
-		status = "disabled";
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	rtc@56 {
-		compatible = "microcrystal,rv3029";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc_hw300>;
-		reg = <0x56>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 2>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_base>;
-
-	pinctrl_hog_base: hog-base-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x120b0
-			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x120b0
-			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x120b0
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x120b0
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x120b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
-			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
-			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
-			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x1b0b0
-		>;
-	};
-
-	pinctrl_enet_100M: enet-100M-grp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x000b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x000b1
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x120b0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2-grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
-			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2-grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pmic_hw300: pmic-hw300-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1B0B0
-		>;
-	};
-
-	pinctrl_rtc_hw300: rtc-hw300-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x120B0
-		>;
-	};
-
-	pinctrl_tsc2004_hw300: tsc2004-hw300-grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x120B0
-		>;
-	};
-
-	pinctrl_uart1: uart1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_D19__UART1_CTS_B		0x4001b0b1
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x4001b0b1
-			MX6QDL_PAD_EIM_D24__GPIO3_IO24		0x4001b0b1
-			MX6QDL_PAD_EIM_D25__GPIO3_IO25		0x4001b0b1
-			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x4001b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B	0x4001b0b1
-		>;
-	};
-
-	pinctrl_usbh1: usbh1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x120B0
-		>;
-	};
-
-	pinctrl_usbotg: usbotg-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2-grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x120B0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3-grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x120B0
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4-grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-		>;
-	};
-};
-
-&reg_arm {
-	vin-supply = <&sw3_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&sw1_reg>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	vbus-supply = <&reg_usb_h1_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	keep-power-in-suspend;
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	non-removable;
-	bus-width = <8>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index fa2307d8ce86..9591848cbd37 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -102,7 +102,7 @@
 	cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "m25p80", "jedec,spi-nor";
 		spi-max-frequency = <40000000>;
 		reg = <0>;
@@ -112,7 +112,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 	phy-supply = <&vgen2_1v2_eth>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/imx6q-dms-ba16.dts
index 48fb47e715f6..137db38f0d27 100644
--- a/arch/arm/boot/dts/imx6q-dms-ba16.dts
+++ b/arch/arm/boot/dts/imx6q-dms-ba16.dts
@@ -47,7 +47,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: m25p80@0 {
+	m25_eeprom: flash@0 {
 		compatible = "atmel,at25256B", "atmel,at25";
 		spi-max-frequency = <20000000>;
 		size = <0x8000>;
diff --git a/arch/arm/boot/dts/imx6q-ds.dts b/arch/arm/boot/dts/imx6q-ds.dts
new file mode 100644
index 000000000000..b0a63a133977
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-ds.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2021 Dillon Min <dillon.minfei@gmail.com>
+//
+// Based on imx6qdl-sabresd.dtsi which is:
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-ds.dtsi"
+
+/ {
+	model = "DaSheng i.MX6 Quad Com-9xx Board";
+	compatible = "ds,imx6q-sbc", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index c63f371ede8b..78d941fef5df 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -146,6 +146,7 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
index ccc2487d47ca..2fda68f9d3f6 100644
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2013 Philipp Zabel
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013 Philipp Zabel
 
 /dts-v1/;
 #include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 4cde45d5c90c..522a51042965 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -34,20 +34,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
 			default-state = "off";
@@ -137,7 +137,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,w25q256", "jedec,spi-nor";
 		spi-max-frequency = <30000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts
index b8feadbff967..6406ade14f57 100644
--- a/arch/arm/boot/dts/imx6q-h100.dts
+++ b/arch/arm/boot/dts/imx6q-h100.dts
@@ -76,19 +76,19 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_h100_leds>;
 
-		led0: power {
+		led0: led-power {
 			label = "power";
 			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		led1: stream {
+		led1: led-stream {
 			label = "stream";
 			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led2: rec {
+		led2: led-rec {
 			label = "rec";
 			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/imx6q-kp.dtsi
index 1ade0bff681d..5e0ed5560040 100644
--- a/arch/arm/boot/dts/imx6q-kp.dtsi
+++ b/arch/arm/boot/dts/imx6q-kp.dtsi
@@ -66,14 +66,14 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led-green {
 			label = "led1";
 			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "gpio";
 			default-state = "off";
 		};
 
-		red {
+		led-red {
 			label = "led0";
 			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "gpio";
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
index 05ee28388229..2c9961333b0a 100644
--- a/arch/arm/boot/dts/imx6q-marsboard.dts
+++ b/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -73,14 +73,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user1 {
+		led-user1 {
 			label = "imx6:green:user1";
 			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "heartbeat";
 		};
 
-		user2 {
+		led-user2 {
 			label = "imx6:green:user2";
 			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
 			default-state = "off";
@@ -100,7 +100,7 @@
 	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-mba6.dtsi b/arch/arm/boot/dts/imx6q-mba6.dtsi
new file mode 100644
index 000000000000..0d7be4567291
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-mba6.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&ecspi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5_mba6x>;
+	cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+};
+
+&ethphy {
+	rxdv-skew-ps = <180>;
+	txen-skew-ps = <120>;
+	rxd3-skew-ps = <180>;
+	rxd2-skew-ps = <180>;
+	rxd1-skew-ps = <180>;
+	rxd0-skew-ps = <180>;
+	txd3-skew-ps = <120>;
+	txd2-skew-ps = <0>;
+	txd1-skew-ps = <180>;
+	txd0-skew-ps = <360>;
+	txc-skew-ps = <1860>;
+	rxc-skew-ps = <1860>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi5_mba6x: ecspi5grp-mba6x {
+		fsl,pins = <
+			/* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
+			MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b099
+			MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0xb099
+			MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0xb099
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0xb099 /* eCSPI5 SS0 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-mba6a.dts b/arch/arm/boot/dts/imx6q-mba6a.dts
new file mode 100644
index 000000000000..349a08605a5e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-mba6a.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q-tqma6a.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6a.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6Q on MBa6x";
+	compatible = "tq,imx6q-mba6x-a", "tq,mba6a",
+		     "tq,imx6q-tqma6q-a", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-mba6b.dts b/arch/arm/boot/dts/imx6q-mba6b.dts
new file mode 100644
index 000000000000..02c9f3e91b8f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-mba6b.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6Q on MBa6x";
+	compatible = "tq,imx6q-mba6x-b", "tq,mba6b",
+		     "tq,imx6q-tqma6q-b", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts
index 55692c73943d..f08b37010291 100644
--- a/arch/arm/boot/dts/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/imx6q-mccmon6.dts
@@ -100,8 +100,10 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index 52e3567d1859..ee8c0bd3ecfd 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -86,7 +86,7 @@
 			linux,code = <KEY_POWER>;
 		};
 
-		lid {
+		lid-event {
 			label = "Lid";
 			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
 			linux,input-type = <5>;	/* EV_SW */
@@ -99,7 +99,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_leds_novena>;
 
-		heartbeat {
+		led-heartbeat {
 			label = "novena:white:panel";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
@@ -222,20 +222,30 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet_novena>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	rxc-skew-ps = <3000>;
-	rxdv-skew-ps = <0>;
-	txc-skew-ps = <3000>;
-	txen-skew-ps = <0>;
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txd0-skew-ps = <3000>;
-	txd1-skew-ps = <3000>;
-	txd2-skew-ps = <3000>;
-	txd3-skew-ps = <3000>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			rxc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			txen-skew-ps = <0>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <3000>;
+			txd1-skew-ps = <3000>;
+			txd2-skew-ps = <3000>;
+			txd3-skew-ps = <3000>;
+		};
+	};
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
index 2e70ea5623c6..322f071d972f 100644
--- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
+++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
@@ -8,6 +8,9 @@
 #include "imx6q.dtsi"
 #include "imx6qdl-phytec-phycore-som.dtsi"
 #include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with eMMC";
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
index 65d2e483c136..3f13726c8058 100644
--- a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
@@ -8,6 +8,9 @@
 #include "imx6q.dtsi"
 #include "imx6qdl-phytec-phycore-som.dtsi"
 #include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND";
diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts
index 7a33e54cc0f1..bad8d831e64e 100644
--- a/arch/arm/boot/dts/imx6q-pistachio.dts
+++ b/arch/arm/boot/dts/imx6q-pistachio.dts
@@ -100,7 +100,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 			wakeup-source;
diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts
index b4605edfd2ab..d8fa83effd63 100644
--- a/arch/arm/boot/dts/imx6q-prti6q.dts
+++ b/arch/arm/boot/dts/imx6q-prti6q.dts
@@ -364,8 +364,8 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_wifi>;
 		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = "38400000";
-		tcxo-clock-frequency = "19200000";
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <19200000>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts
index 349959d38020..54a57a4548e2 100644
--- a/arch/arm/boot/dts/imx6q-prtwd2.dts
+++ b/arch/arm/boot/dts/imx6q-prtwd2.dts
@@ -22,6 +22,13 @@
 		reg = <0x80000000 0x20000000>;
 	};
 
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
 	usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -49,13 +56,17 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>;
-	clock-names = "ipg", "ahb";
 	status = "okay";
 
 	fixed-link {
diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts
index 1767e1a3cd53..271f4b2d9b9f 100644
--- a/arch/arm/boot/dts/imx6q-rex-pro.dts
+++ b/arch/arm/boot/dts/imx6q-rex-pro.dts
@@ -19,7 +19,7 @@
 };
 
 &ecspi3 {
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf032b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index dc51262e7b2f..7c6a2f234ccb 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -1,43 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts b/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
new file mode 100644
index 000000000000..ff97d22eb09f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+#include "imx6qdl-skov-revc-lt2.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU QuadCore";
+	compatible = "skov,imx6q-skov-revc-lt2", "fsl,imx6q";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001f878
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001f878
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-skov-revc-lt6.dts b/arch/arm/boot/dts/imx6q-skov-revc-lt6.dts
new file mode 100644
index 000000000000..3e3b36ad362a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-skov-revc-lt6.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU QuadCore";
+	compatible = "skov,imx6q-skov-revc-lt6", "fsl,imx6q";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	display {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "logictechno,lttd800480070-l6wh-rt";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001F878
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001F878
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts b/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts
new file mode 100644
index 000000000000..a3f247c722b4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU QuadCore";
+	compatible = "skov,imx6q-skov-reve-mi1010ait-1cp1", "fsl,imx6q";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	panel {
+		compatible = "multi-inno,mi1010ait-1cp";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+		wakeup-source;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			/* external 1 k pull up */
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x40010878
+			/* external 1 k pull up */
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x40010878
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001F878
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001F878
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			/* external 10 k pull up */
+			/* CTP_INT */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+			/* CTP_RST */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0
+		>;
+	};
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3160000>;
+	regulator-max-microvolt = <3160000>;
+	voltage-table = <3160000 73>;
+};
diff --git a/arch/arm/boot/dts/imx6q-solidsense.dts b/arch/arm/boot/dts/imx6q-solidsense.dts
new file mode 100644
index 000000000000..0e6a325df363
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-solidsense.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-solidsense.dtsi"
+
+/ {
+	model = "SolidRun SolidSense Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,solidsense/q", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index 343364d3e4f7..2f576e2ce73f 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -49,7 +49,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		blue {
+		led-blue {
 			label = "blue_status_led";
 			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
@@ -159,7 +159,7 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	rtc: ds1307@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1307";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
index d16ff2083d62..ad59b23ef27a 100644
--- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
@@ -89,7 +89,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
index 63550351340d..2290c1237634 100644
--- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
+++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
@@ -28,7 +28,7 @@
 		compatible = "gpio-keys";
 		autorepeat;
 
-		back {
+		key-back {
 			gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 			label = "Key Back";
@@ -37,7 +37,7 @@
 			wakeup-source;
 		};
 
-		home {
+		key-home {
 			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 			label = "Key Home";
@@ -46,7 +46,7 @@
 			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 			label = "Key Menu";
diff --git a/arch/arm/boot/dts/imx6q-vicut1.dts b/arch/arm/boot/dts/imx6q-vicut1.dts
index 0a4e251be162..dd91aff3f9e2 100644
--- a/arch/arm/boot/dts/imx6q-vicut1.dts
+++ b/arch/arm/boot/dts/imx6q-vicut1.dts
@@ -6,12 +6,9 @@
 /dts-v1/;
 #include "imx6q.dtsi"
 #include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
 
 / {
 	model = "Kverneland UT1Q Board";
 	compatible = "kvg,vicut1q", "fsl,imx6q";
 };
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-yapp4-crux.dts b/arch/arm/boot/dts/imx6q-yapp4-crux.dts
new file mode 100644
index 000000000000..bddf3822ebf7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-yapp4-crux.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Crux i.MX6Quad board";
+	compatible = "ysoft,imx6q-yapp4-crux", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts b/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts
new file mode 100644
index 000000000000..ec6651ba4ba2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Pegasus i.MX6Quad board";
+	compatible = "ysoft,imx6q-yapp4-pegasus", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 8d209c1b3ca7..df86049a695b 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -159,14 +159,17 @@
 		};
 	};
 
-	soc {
+	soc: soc {
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x40000>;
+			ranges = <0 0x00900000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-		bus@2000000 { /* AIPS1 */
+		aips1: bus@2000000 { /* AIPS1 */
 			spba-bus@2000000 {
 				ecspi5: spi@2018000 {
 					#address-cells = <1>;
@@ -177,7 +180,7 @@
 					clocks = <&clks IMX6Q_CLK_ECSPI5>,
 						 <&clks IMX6Q_CLK_ECSPI5>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
+					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 30fa349f9d05..4cc965277c52 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -1,11 +1,12 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Toradex Apalis iMX6Q/D Module";
@@ -19,88 +20,182 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		pwms = <&pwm4 0 5000000>;
-		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_module_3v3>;
+		pwms = <&pwm4 0 5000000 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	clk_ov5640_osc: clk-ov5640-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
 		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di1_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel_dpi: panel-dpi {
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel_lvds: panel-lvds {
+		compatible = "panel-lvds";
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			lvds_panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
 	};
 
 	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "+V3.3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3";
 	};
 
 	reg_module_3v3_audio: regulator-module-3v3-audio {
 		compatible = "regulator-fixed";
-		regulator-name = "+V3.3_AUDIO";
-		regulator-min-microvolt = <3300000>;
+		regulator-always-on;
 		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_AUDIO";
+	};
+
+	reg_ov5640_1v8_d_o_vdd: regulator-ov5640-1v8-d-o-vdd {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "DOVDD/DVDD_1.8V";
+		/* Note: The CSI module uses on-board 3.3V_SW supply */
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_ov5640_2v8_a_vdd: regulator-ov5640-2v8-a-vdd {
+		compatible = "regulator-fixed";
 		regulator-always-on;
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		regulator-name = "AVDD/AFVDD_2.8V";
+		/* Note: The CSI module uses on-board 3.3V_SW supply */
+		vin-supply = <&reg_module_3v3>;
 	};
 
 	reg_usb_otg_vbus: regulator-usb-otg-vbus {
 		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_otg_vbus";
 		status = "disabled";
 	};
 
 	/* on module USB hub */
 	reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
 		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
-		regulator-name = "usb_host_vbus_hub";
-		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_host_vbus_hub";
 		startup-delay-us = <2000>;
-		enable-active-high;
 		status = "okay";
 	};
 
 	reg_usb_host_vbus: regulator-usb-host-vbus {
 		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
-		regulator-name = "usb_host_vbus";
-		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_host_vbus";
 		vin-supply = <&reg_usb_host_vbus_hub>;
 		status = "disabled";
 	};
 
 	sound {
 		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6q-apalis-sgtl5000";
-		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
 			"LINE_IN", "Line In Jack",
 			"MIC_IN", "Mic Jack",
 			"Mic Jack", "Mic Bias",
 			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
+		model = "imx6q-apalis-sgtl5000";
 		mux-ext-port = <4>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
 	};
 
 	sound_spdif: sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
 		spdif-controller = <&spdif>;
 		spdif-in;
 		spdif-out;
+		model = "imx-spdif";
 		status = "disabled";
 	};
 };
@@ -125,6 +220,10 @@
 	status = "disabled";
 };
 
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
 /* Apalis SPI1 */
 &ecspi1 {
 	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
@@ -141,6 +240,214 @@
 	status = "disabled";
 };
 
+&gpio1 {
+	gpio-line-names = "MXM3_84",
+			  "MXM3_4",
+			  "MXM3_15/GPIO7",
+			  "MXM3_96",
+			  "MXM3_37",
+			  "",
+			  "MXM3_17/GPIO8",
+			  "MXM3_14",
+			  "MXM3_12",
+			  "MXM3_2",
+			  "MXM3_184",
+			  "MXM3_180",
+			  "MXM3_178",
+			  "MXM3_176",
+			  "MXM3_188",
+			  "MXM3_186",
+			  "MXM3_160",
+			  "MXM3_162",
+			  "MXM3_150",
+			  "MXM3_144",
+			  "MXM3_154",
+			  "MXM3_146",
+			  "",
+			  "",
+			  "MXM3_72";
+};
+
+&gpio2 {
+	gpio-line-names = "MXM3_148",
+			  "MXM3_152",
+			  "MXM3_156",
+			  "MXM3_158",
+			  "MXM3_1/GPIO1",
+			  "MXM3_3/GPIO2",
+			  "MXM3_5/GPIO3",
+			  "MXM3_7/GPIO4",
+			  "MXM3_95",
+			  "MXM3_6",
+			  "MXM3_8",
+			  "MXM3_123",
+			  "MXM3_126",
+			  "MXM3_128",
+			  "MXM3_130",
+			  "MXM3_132",
+			  "MXM3_253",
+			  "MXM3_251",
+			  "MXM3_283",
+			  "MXM3_281",
+			  "MXM3_279",
+			  "MXM3_277",
+			  "MXM3_243",
+			  "MXM3_235",
+			  "MXM3_231",
+			  "MXM3_229",
+			  "MXM3_233",
+			  "MXM3_198",
+			  "MXM3_275",
+			  "MXM3_273",
+			  "MXM3_207",
+			  "MXM3_122";
+};
+
+&gpio3 {
+	gpio-line-names = "MXM3_271",
+			  "MXM3_269",
+			  "MXM3_301",
+			  "MXM3_299",
+			  "MXM3_297",
+			  "MXM3_295",
+			  "MXM3_293",
+			  "MXM3_291",
+			  "MXM3_289",
+			  "MXM3_287",
+			  "MXM3_249",
+			  "MXM3_247",
+			  "MXM3_245",
+			  "MXM3_286",
+			  "MXM3_239",
+			  "MXM3_35",
+			  "MXM3_205",
+			  "MXM3_203",
+			  "MXM3_201",
+			  "MXM3_116",
+			  "MXM3_114",
+			  "MXM3_262",
+			  "MXM3_274",
+			  "MXM3_124",
+			  "MXM3_110",
+			  "MXM3_120",
+			  "MXM3_263",
+			  "MXM3_265",
+			  "",
+			  "MXM3_135",
+			  "MXM3_261",
+			  "MXM3_259";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_194",
+			  "MXM3_136",
+			  "MXM3_134",
+			  "MXM3_140",
+			  "MXM3_138",
+			  "",
+			  "MXM3_220",
+			  "",
+			  "",
+			  "MXM3_18",
+			  "MXM3_16",
+			  "",
+			  "",
+			  "MXM3_214",
+			  "MXM3_216",
+			  "MXM3_164";
+};
+
+&gpio5 {
+	gpio-line-names = "MXM3_159",
+			  "",
+			  "",
+			  "",
+			  "MXM3_257",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_200",
+			  "MXM3_196",
+			  "MXM3_204",
+			  "MXM3_202",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_191",
+			  "MXM3_197",
+			  "MXM3_77",
+			  "MXM3_195",
+			  "MXM3_221",
+			  "MXM3_225",
+			  "MXM3_223",
+			  "MXM3_227",
+			  "MXM3_209",
+			  "MXM3_211",
+			  "MXM3_118",
+			  "MXM3_112",
+			  "MXM3_187",
+			  "MXM3_185";
+};
+
+&gpio6 {
+	gpio-line-names = "MXM3_183",
+			  "MXM3_181",
+			  "MXM3_179",
+			  "MXM3_177",
+			  "MXM3_175",
+			  "MXM3_173",
+			  "MXM3_255",
+			  "MXM3_83",
+			  "MXM3_91",
+			  "MXM3_13/GPIO6",
+			  "MXM3_11/GPIO5",
+			  "MXM3_79",
+			  "",
+			  "",
+			  "MXM3_190",
+			  "MXM3_193",
+			  "MXM3_89";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_99",
+			  "MXM3_85",
+			  "MXM3_217",
+			  "MXM3_215";
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@1 {
+			reg = <1>;
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+				remote-endpoint = <&adv7280_to_ipu1_csi0_mux>;
+			};
+		};
+	};
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
@@ -177,6 +484,16 @@
 	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "disabled";
+
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		/* These GPIOs are muxed with the iomuxc node */
+		interrupt-parent = <&gpio6>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;	/* MXM3_11 */
+		reg = <0x4a>;
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;	/* MXM3_13 */
+		status = "disabled";
+	};
 };
 
 /*
@@ -192,101 +509,105 @@
 	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
+		fsl,pmic-stby-poweroff;
 		reg = <0x08>;
 
 		regulators {
 			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
 				regulator-ramp-delay = <6250>;
 			};
 
 			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
 				regulator-ramp-delay = <6250>;
 			};
 
 			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1975000>;
+				regulator-min-microvolt = <400000>;
 			};
 
 			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <5150000>;
+				regulator-min-microvolt = <5000000>;
 			};
 
 			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-microvolt = <1000000>;
 			};
 
 			vref_reg: vrefddr {
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
 			};
 
 			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1550000>;
+				regulator-min-microvolt = <800000>;
 			};
 
 			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1550000>;
+				regulator-min-microvolt = <800000>;
 			};
 
 			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 			};
 
 			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
 			};
 
 			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 			};
 
 			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 			};
 		};
 	};
 
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
 		VDDA-supply = <&reg_module_3v3_audio>;
 		VDDIO-supply = <&reg_module_3v3>;
 		VDDD-supply = <&vgen4_reg>;
@@ -295,25 +616,25 @@
 	/* STMPE811 touch screen controller */
 	stmpe811@41 {
 		compatible = "st,stmpe811";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch_int>;
-		reg = <0x41>;
+		blocks = <0x5>;
+		id = <0>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio4>;
 		interrupt-controller;
-		id = <0>;
-		blocks = <0x5>;
+		interrupt-parent = <&gpio4>;
 		irq-trigger = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		reg = <0x41>;
 		/* 3.25 MHz ADC clock speed */
 		st,adc-freq = <1>;
 		/* 12-bit ADC */
 		st,mod-12b = <1>;
 		/* internal ADC reference */
 		st,ref-sel = <0>;
-		/* ADC converstion time: 80 clocks */
+		/* ADC conversion time: 80 clocks */
 		st,sample-time = <4>;
 
-		stmpe_touchscreen {
+		stmpe_ts: stmpe_touchscreen {
 			compatible = "st,stmpe-ts";
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
@@ -328,10 +649,12 @@
 			st,settling = <3>;
 			/* 5 ms touch detect interrupt delay */
 			st,touch-det-delay = <5>;
+			status = "disabled";
 		};
 
-		stmpe_adc {
+		stmpe_adc: stmpe_adc {
 			compatible = "st,stmpe-adc";
+			#io-channel-cells = <1>;
 			/* forbid to use ADC channels 3-0 (touch) */
 			st,norequest-mask = <0x0F>;
 		};
@@ -350,6 +673,90 @@
 	scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "disabled";
+
+	adv_7280: adv7280@21 {
+		compatible = "adi,adv7280";
+		adv,force-bt656-4;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_csi0>;
+		reg = <0x21>;
+		status = "disabled";
+
+		port {
+			adv7280_to_ipu1_csi0_mux: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+			};
+		};
+	};
+
+	ov5640_csi_cam: ov5640_mipi@3c {
+		compatible = "ovti,ov5640";
+		AVDD-supply = <&reg_ov5640_2v8_a_vdd>;
+		DOVDD-supply = <&reg_ov5640_1v8_d_o_vdd>;
+		DVDD-supply = <&reg_ov5640_1v8_d_o_vdd>;
+		clock-names = "xclk";
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cam_mclk>;
+		/* These GPIOs are muxed with the iomuxc node */
+		powerdown-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		reg = <0x3c>;
+		reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&mipi_csi_from_ov5640>;
+			};
+		};
+	};
+};
+
+&ipu1_di1_disp1 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	lvds-channel@0 {
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_panel_in>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "disabled";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi_from_ov5640: endpoint {
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+		};
+	};
 };
 
 &pwm1 {
@@ -371,7 +778,6 @@
 };
 
 &pwm4 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "disabled";
@@ -388,72 +794,72 @@
 };
 
 &uart1 {
+	fsl,dte-mode;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
-	fsl,dte-mode;
 	uart-has-rtscts;
 	status = "disabled";
 };
 
 &uart2 {
+	fsl,dte-mode;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2_dte>;
-	fsl,dte-mode;
 	uart-has-rtscts;
 	status = "disabled";
 };
 
 &uart4 {
+	fsl,dte-mode;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4_dte>;
-	fsl,dte-mode;
 	status = "disabled";
 };
 
 &uart5 {
+	fsl,dte-mode;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5_dte>;
-	fsl,dte-mode;
 	status = "disabled";
 };
 
 &usbotg {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
 	status = "disabled";
 };
 
 /* MMC1 */
 &usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>;
-	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <8>;
+	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
+	vqmmc-supply = <&reg_module_3v3>;
 	status = "disabled";
 };
 
 /* SD1 */
 &usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <4>;
 	disable-wp;
 	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vqmmc-supply = <&reg_module_3v3>;
 	status = "disabled";
 };
 
 /* eMMC */
 &usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <8>;
 	no-1-8-v;
 	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_module_3v3>;
 	status = "okay";
 };
 
@@ -462,49 +868,57 @@
 };
 
 &iomuxc {
-	pinctrl_apalis_gpio1: gpio2io04grp {
+	/* Mux the Apalis GPIOs */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
+		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
+		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
+		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
+		    >;
+
+	pinctrl_apalis_gpio1: apalisgpio1grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
 		>;
 	};
 
-	pinctrl_apalis_gpio2: gpio2io05grp {
+	pinctrl_apalis_gpio2: apalisgpio2grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0
 		>;
 	};
 
-	pinctrl_apalis_gpio3: gpio2io06grp {
+	pinctrl_apalis_gpio3: apalisgpio3grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0
 		>;
 	};
 
-	pinctrl_apalis_gpio4: gpio2io07grp {
+	pinctrl_apalis_gpio4: apalisgpio4grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0
 		>;
 	};
 
-	pinctrl_apalis_gpio5: gpio6io10grp {
+	pinctrl_apalis_gpio5: apalisgpio5grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0
 		>;
 	};
 
-	pinctrl_apalis_gpio6: gpio6io09grp {
+	pinctrl_apalis_gpio6: apalisgpio6grp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0
 		>;
 	};
 
-	pinctrl_apalis_gpio7: gpio1io02grp {
+	pinctrl_apalis_gpio7: apalisgpio7grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0
 		>;
 	};
 
-	pinctrl_apalis_gpio8: gpio1io06grp {
+	pinctrl_apalis_gpio8: apalisgpio8grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0
 		>;
@@ -516,8 +930,6 @@
 			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
 			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
 			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
 		>;
 	};
 
@@ -599,7 +1011,7 @@
 		>;
 	};
 
-	pinctrl_gpio_bl_on: gpioblon {
+	pinctrl_gpio_bl_on: gpioblongrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
 		>;
@@ -744,7 +1156,7 @@
 		>;
 	};
 
-	pinctrl_mmc_cd: gpiommccdgrp {
+	pinctrl_mmc_cd: mmccdgrp {
 		fsl,pins = <
 			 /* MMC1 CD */
 			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
@@ -775,41 +1187,47 @@
 		>;
 	};
 
-	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
+	pinctrl_regulator_usbh_pwr: regusbhpwrgrp {
 		fsl,pins = <
 			/* USBH_EN */
 			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058
 		>;
 	};
 
-	pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp {
+	pinctrl_regulator_usbhub_pwr: regusbhubpwrgrp {
 		fsl,pins = <
 			/* USBH_HUB_EN */
 			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058
 		>;
 	};
 
-	pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp {
+	pinctrl_regulator_usbotg_pwr: regusbotgpwrgrp {
 		fsl,pins = <
 			/* USBO1 power en */
 			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058
 		>;
 	};
 
-	pinctrl_reset_moci: gpioresetmocigrp {
+	pinctrl_reset_moci: resetmocigrp {
 		fsl,pins = <
 			/* RESET_MOCI control */
 			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058
 		>;
 	};
 
-	pinctrl_sd_cd: gpiosdcdgrp {
+	pinctrl_sd_cd: sdcdgrp {
 		fsl,pins = <
 			/* SD1 CD */
 			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
 		>;
 	};
 
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1	0x130b0
+		>;
+	};
+
 	pinctrl_spdif: spdifgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
@@ -817,13 +1235,22 @@
 		>;
 	};
 
-	pinctrl_touch_int: gpiotouchintgrp {
+	pinctrl_touch_int: touchintgrp {
 		fsl,pins = <
 			/* STMPE811 interrupt */
 			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
 		>;
 	};
 
+	/* Additional DTR, DSR, DCD */
+	pinctrl_uart1_ctrl: uart1ctrlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+		>;
+	};
+
 	pinctrl_uart1_dce: uart1dcegrp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
@@ -841,15 +1268,6 @@
 		>;
 	};
 
-	/* Additional DTR, DSR, DCD */
-	pinctrl_uart1_ctrl: uart1ctrlgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
-			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
-			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
-		>;
-	};
-
 	pinctrl_uart2_dce: uart2dcegrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
@@ -903,7 +1321,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_4bit: usdhc1grp_4bit {
+	pinctrl_usdhc1_4bit: usdhc1-4bitgrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
 			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
@@ -914,7 +1332,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_8bit: usdhc1grp_8bit {
+	pinctrl_usdhc1_8bit: usdhc1-8bitgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
 			MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index e21f6ac864e5..baa197c90060 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -96,7 +96,7 @@
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q128a11", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index ead7ba27e105..6b64b2fc3995 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -131,7 +131,7 @@
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	status = "okay";
 
-	flash: m25p80@1 {
+	flash: flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q128a11", "jedec,spi-nor";
@@ -154,112 +154,112 @@
 		regulators {
 			bcore1 {
 				regulator-name = "bcore1";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bcore2 {
 				regulator-name = "bcore2";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bpro {
 				regulator-name = "bpro";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bperi {
 				regulator-name = "bperi";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bmem {
 				regulator-name = "bmem";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo2 {
 				regulator-name = "ldo2";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
 			ldo3 {
 				regulator-name = "ldo3";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo4 {
 				regulator-name = "ldo4";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo5 {
 				regulator-name = "ldo5";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo6 {
 				regulator-name = "ldo6";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo7 {
 				regulator-name = "ldo7";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo8 {
 				regulator-name = "ldo8";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo9 {
 				regulator-name = "ldo9";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo10 {
 				regulator-name = "ldo10";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo11 {
 				regulator-name = "ldo11";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bio {
 				regulator-name = "bio";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 			};
@@ -316,12 +316,22 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
 };
 
 &gpmi {
diff --git a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
deleted file mode 100644
index 7672fbfc29be..000000000000
--- a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2020 Toradex
- */
-
-&iomuxc {
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170b1
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100b1
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170f1
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100f1
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
-		>;
-	};
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
-	vmmc-supply = <&reg_module_3v3>;
-	vqmmc-supply = <&vgen3_reg>;
-	wakeup-source;
-	keep-power-in-suspend;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 4e2a309c93fa..570995707504 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -1,11 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Toradex Colibri iMX6DL/S Module";
@@ -13,11 +14,84 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		pwms = <&pwm3 0 5000000>;
-		enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
+		power-supply = <&reg_module_3v3>;
+		pwms = <&pwm3 0 5000000 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	extcon_usbc_det: usbc-det {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbc_det>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio2 22 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	panel_dpi: panel-dpi {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
 		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
 	};
 
 	reg_module_3v3: regulator-module-3v3 {
@@ -38,36 +112,36 @@
 
 	reg_usb_host_vbus: regulator-usb-host-vbus {
 		compatible = "regulator-fixed";
+		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
-		regulator-name = "usb_host_vbus";
-		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_host_vbus";
 		status = "disabled";
 	};
 
 	sound {
 		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6dl-colibri-sgtl5000";
-		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
 			"Headphone Jack", "HP_OUT",
 			"LINE_IN", "Line In Jack",
 			"MIC_IN", "Mic Jack",
 			"Mic Jack", "Mic Bias";
+		model = "imx6dl-colibri-sgtl5000";
 		mux-int-port = <1>;
 		mux-ext-port = <5>;
+		ssi-controller = <&ssi1>;
 	};
 
 	/* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */
 	sound_spdif: sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
 		spdif-controller = <&spdif>;
 		spdif-in;
 		spdif-out;
+		model = "imx-spdif";
 		status = "disabled";
 	};
 };
@@ -92,6 +166,10 @@
 	status = "disabled";
 };
 
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
 /* Colibri SSP */
 &ecspi4 {
 	cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
@@ -101,10 +179,10 @@
 };
 
 &fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
 	phy-handle = <&ethphy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
 	status = "okay";
 
 	mdio {
@@ -118,6 +196,224 @@
 	};
 };
 
+&gpio1 {
+	gpio-line-names = "",
+			  "SODIMM_67",
+			  "SODIMM_180",
+			  "SODIMM_196",
+			  "SODIMM_174",
+			  "SODIMM_176",
+			  "SODIMM_194",
+			  "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_28",
+			  "SODIMM_93",
+			  "SODIMM_69",
+			  "SODIMM_99",
+			  "SODIMM_130",
+			  "SODIMM_106",
+			  "SODIMM_98",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_190",
+			  "SODIMM_51",
+			  "SODIMM_47",
+			  "SODIMM_53",
+			  "",
+			  "SODIMM_22";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_132",
+			  "SODIMM_134",
+			  "SODIMM_135",
+			  "SODIMM_133",
+			  "SODIMM_102",
+			  "SODIMM_43",
+			  "SODIMM_127",
+			  "SODIMM_37",
+			  "SODIMM_104",
+			  "SODIMM_59",
+			  "SODIMM_30",
+			  "SODIMM_100",
+			  "SODIMM_38",
+			  "SODIMM_34",
+			  "SODIMM_32",
+			  "SODIMM_36",
+			  "SODIMM_59",
+			  "SODIMM_67",
+			  "SODIMM_97",
+			  "SODIMM_79",
+			  "SODIMM_103",
+			  "SODIMM_101",
+			  "SODIMM_45",
+			  "SODIMM_105",
+			  "SODIMM_107",
+			  "SODIMM_91",
+			  "SODIMM_89",
+			  "SODIMM_150",
+			  "SODIMM_126",
+			  "SODIMM_128",
+			  "",
+			  "SODIMM_94";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_111",
+			  "SODIMM_113",
+			  "SODIMM_115",
+			  "SODIMM_117",
+			  "SODIMM_119",
+			  "SODIMM_121",
+			  "SODIMM_123",
+			  "SODIMM_125",
+			  "SODIMM_110",
+			  "SODIMM_112",
+			  "SODIMM_114",
+			  "SODIMM_116",
+			  "SODIMM_118",
+			  "SODIMM_120",
+			  "SODIMM_122",
+			  "SODIMM_124",
+			  "",
+			  "SODIMM_96",
+			  "SODIMM_77",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_88",
+			  "SODIMM_90",
+			  "SODIMM_31",
+			  "SODIMM_23",
+			  "SODIMM_29",
+			  "SODIMM_71",
+			  "SODIMM_73",
+			  "SODIMM_92",
+			  "SODIMM_81",
+			  "SODIMM_131",
+			  "SODIMM_129";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_168",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_184",
+			  "SODIMM_186",
+			  "HDMI_15",
+			  "HDMI_16",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "SODIMM_24",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_95",
+			  "",
+			  "SODIMM_86",
+			  "",
+			  "SODIMM_65",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_136",
+			  "SODIMM_138",
+			  "SODIMM_140",
+			  "SODIMM_142",
+			  "SODIMM_144",
+			  "SODIMM_146",
+			  "SODIMM_172",
+			  "SODIMM_170",
+			  "SODIMM_149",
+			  "SODIMM_151",
+			  "SODIMM_153",
+			  "SODIMM_155",
+			  "SODIMM_157",
+			  "SODIMM_159",
+			  "SODIMM_161",
+			  "SODIMM_163",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_165",
+			  "SODIMM_167";
+};
+
+&gpio6 {
+	gpio-line-names = "SODIMM_169",
+			  "SODIMM_171",
+			  "SODIMM_173",
+			  "SODIMM_175",
+			  "SODIMM_177",
+			  "SODIMM_179",
+			  "SODIMM_85",
+			  "SODIMM_166",
+			  "SODIMM_160",
+			  "SODIMM_162",
+			  "SODIMM_158",
+			  "SODIMM_164",
+			  "",
+			  "",
+			  "SODIMM_156",
+			  "SODIMM_75",
+			  "SODIMM_154",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_152";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "",
+			  "SODIMM_137";
+};
+
 &hdmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hdmi_ddc>;
@@ -132,65 +428,66 @@
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-0 = <&pinctrl_i2c2_gpio>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
 	scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
+		fsl,pmic-stby-poweroff;
 		reg = <0x08>;
 
 		regulators {
 			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
 				regulator-ramp-delay = <6250>;
 			};
 
 			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
 				regulator-ramp-delay = <6250>;
 			};
 
 			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1975000>;
+				regulator-min-microvolt = <400000>;
 			};
 
 			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <5150000>;
+				regulator-min-microvolt = <5000000>;
 			};
 
 			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-microvolt = <1000000>;
 			};
 
 			vref_reg: vrefddr {
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
 			};
 
 			/* vgen1: unused */
 
 			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1550000>;
+				regulator-min-microvolt = <800000>;
 			};
 
 			/*
@@ -198,57 +495,60 @@
 			 * the i.MX 6 NVCC_SD1.
 			 */
 			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 			};
 
 			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
 			};
 
 			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 			};
 
 			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 			};
 		};
 	};
 
 	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
+		lrclk-strength = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_module_3v3_audio>;
 		VDDIO-supply = <&reg_module_3v3>;
 		VDDD-supply = <&vgen4_reg>;
-		lrclk-strength = <3>;
 	};
 
 	/* STMPE811 touch screen controller */
 	stmpe811@41 {
 		compatible = "st,stmpe811";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch_int>;
-		reg = <0x41>;
+		blocks = <0x5>;
 		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio6>;
 		interrupt-controller;
 		id = <0>;
-		blocks = <0x5>;
 		irq-trigger = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		reg = <0x41>;
 		/* 3.25 MHz ADC clock speed */
 		st,adc-freq = <1>;
 		/* 12-bit ADC */
@@ -258,7 +558,7 @@
 		/* ADC converstion time: 80 clocks */
 		st,sample-time = <4>;
 
-		stmpe_touchscreen {
+		stmpe_ts: stmpe_touchscreen {
 			compatible = "st,stmpe-ts";
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
@@ -273,9 +573,10 @@
 			st,settling = <3>;
 			/* 5 ms touch detect interrupt delay */
 			st,touch-det-delay = <5>;
+			status = "disabled";
 		};
 
-		stmpe_adc {
+		stmpe_adc: stmpe_adc {
 			compatible = "st,stmpe-adc";
 			/* forbid to use ADC channels 3-0 (touch) */
 			st,norequest-mask = <0x0F>;
@@ -294,6 +595,21 @@
 	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "disabled";
+
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		interrupt-parent = <&gpio2>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;	/* SODIMM 107 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_atmel_conn>;
+		reg = <0x4a>;
+		reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;	/* SODIMM 106 */
+		status = "disabled";
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
 };
 
 /* Colibri PWM<B> */
@@ -312,7 +628,6 @@
 
 /* Colibri PWM<A> */
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "disabled";
@@ -338,56 +653,66 @@
 
 /* Colibri UART_A */
 &uart1 {
+	fsl,dte-mode;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
-	fsl,dte-mode;
 	uart-has-rtscts;
 	status = "disabled";
 };
 
 /* Colibri UART_B */
 &uart2 {
+	fsl,dte-mode;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2_dte>;
-	fsl,dte-mode;
 	uart-has-rtscts;
 	status = "disabled";
 };
 
 /* Colibri UART_C */
 &uart3 {
+	fsl,dte-mode;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3_dte>;
-	fsl,dte-mode;
 	status = "disabled";
 };
 
+/* Colibri USBH */
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+};
+
+/* Colibri USBC */
 &usbotg {
-	disable-over-current;
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	extcon = <0>, <&extcon_usbc_det>;
 	status = "disabled";
 };
 
 /* Colibri MMC */
 &usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
 	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
-	disable-wp;
-	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <4>;
 	no-1-8-v;
+	disable-wp;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_mmc_cd_sleep>;
+	vmmc-supply = <&reg_module_3v3>;
+	vqmmc-supply = <&vgen3_reg>;
 	status = "disabled";
 };
 
 /* eMMC */
 &usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <8>;
 	no-1-8-v;
 	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_module_3v3>;
 	status = "okay";
 };
 
@@ -405,14 +730,34 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh_oc_1>;
 
+	/* Atmel MXT touchsceen + Capacitive Touch Adapter */
+	/* NOTE: This pin group conflicts with pin groups
+	 * pinctrl_pwm1/pinctrl_pwm4. Don't use them simultaneously.
+	 */
+	pinctrl_atmel_adap: atmeladaptergrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09   0xb0b1  /* SODIMM  28 */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0xb0b1  /* SODIMM  30 */
+		>;
+	};
+
+	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
+	/* NOTE: This pin group conflicts with pin groups pinctrl_weim_cs1 and
+	 * pinctrl_weim_cs2. Don't use them simultaneously.
+	 */
+	pinctrl_atmel_conn: atmelconnectorgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24  0xb0b1  /* SODIMM_107 */
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0xb0b1  /* SODIMM_106 */
+		>;
+	};
+
 	pinctrl_audmux: audmuxgrp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_COL0__AUD5_TXC	0x130b0
 			MX6QDL_PAD_KEY_ROW0__AUD5_TXD	0x130b0
 			MX6QDL_PAD_KEY_COL1__AUD5_TXFS	0x130b0
 			MX6QDL_PAD_KEY_ROW1__AUD5_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0
 		>;
 	};
 
@@ -423,28 +768,52 @@
 		>;
 	};
 
+	/* CSI pins used as GPIOs */
+	pinctrl_csi_gpio_1: csigpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18   0x1b0b0
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19   0x1b0b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x130b0
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06   0x1b0b0
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18   0x1b0b0
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21   0x1b0b0
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20   0x1b0b0
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31   0x1b0b0
+			MX6QDL_PAD_EIM_D17__GPIO3_IO17   0x1b0b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+			MX6QDL_PAD_SD2_CMD__GPIO1_IO11   0x1b0b0
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15  0x1b0b0
+		>;
+	};
+
+	pinctrl_csi_gpio_2: csigpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04   0x1b0b0
+		>;
+	};
+
 	pinctrl_ecspi4: ecspi4grp {
 		fsl,pins = <
+			/* SPI CS */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x000b1
 			MX6QDL_PAD_EIM_D22__ECSPI4_MISO	0x100b1
 			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI	0x100b1
 			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-			/* SPI CS */
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x000b1
 		>;
 	};
 
 	pinctrl_enet: enetgrp {
 		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
 			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
 			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
 			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
 			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
 			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK     ((1<<30) | 0x1b0b0)
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	((1<<30) | 0x1b0b0)
 		>;
 	};
 
@@ -462,13 +831,32 @@
 		>;
 	};
 
-	pinctrl_gpio_bl_on: gpioblon {
+	pinctrl_gpio_1: gpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20     0x1b0b0
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27      0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03     0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04     0x1b0b0
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06     0x1b0b0
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08     0x1b0b0
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11     0x1b0b0
+		>;
+	};
+	pinctrl_gpio_2: gpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07       0x1b0b0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08       0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblongrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0
 		>;
 	};
 
-	pinctrl_gpio_keys: gpiokeys {
+	pinctrl_gpio_keys: gpiokeysgrp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x130b0
 		>;
@@ -483,15 +871,15 @@
 
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
 			MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
 		>;
 	};
 
-	pinctrl_i2c2_gpio: i2c2grp {
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
 		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1
 			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1
 		>;
 	};
 
@@ -523,8 +911,8 @@
 			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC	0xb0b1
 			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC	0xb0b1
 			/* Disable PWM pins on camera interface */
-			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x40
 			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x40
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x40
 		>;
 	};
 
@@ -555,19 +943,34 @@
 		>;
 	};
 
-	pinctrl_mic_gnd: gpiomicgnd {
+	pinctrl_lvds_transceiver: lvdstxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x03030 /* SODIMM  95 */
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07   0x0b030 /* SODIMM  55 */
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08   0x03030 /* SODIMM  63 */
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x03030 /* SODIMM  99 */
+		>;
+	};
+
+	pinctrl_mic_gnd: micgndgrp {
 		fsl,pins = <
 			/* Controls Mic GND, PU or '1' pull Mic GND to GND */
 			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0
 		>;
 	};
 
-	pinctrl_mmc_cd: gpiommccd {
+	pinctrl_mmc_cd: mmccdgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x1b0b1
 		>;
 	};
 
+	pinctrl_mmc_cd_sleep: mmccdslpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x0
+		>;
+	};
+
 	pinctrl_pwm1: pwm1grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b1
@@ -576,15 +979,15 @@
 
 	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
 			MX6QDL_PAD_EIM_A21__GPIO2_IO17	0x00040
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
 		>;
 	};
 
 	pinctrl_pwm3: pwm3grp {
 		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b1
 			MX6QDL_PAD_EIM_A22__GPIO2_IO16	0x00040
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b1
 		>;
 	};
 
@@ -596,15 +999,15 @@
 
 	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
 		fsl,pins = <
-			/* USBH_EN */
+			/* SODIMM 129 / USBH_PEN */
 			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x0f058
 		>;
 	};
 
-	pinctrl_usbh_oc_1: usbhoc1grp {
+	pinctrl_sgtl5000: sgtl5000grp {
 		fsl,pins = <
-			/* USBH_OC */
-			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b0
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0
 		>;
 	};
 
@@ -650,9 +1053,9 @@
 	pinctrl_uart2_dte: uart2dtegrp {
 		fsl,pins = <
 			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
 			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
 		>;
 	};
 
@@ -665,22 +1068,29 @@
 
 	pinctrl_usbc_det: usbcdetgrp {
 		fsl,pins = <
-			/* USBC_DET */
+			/* SODIMM 137 / USBC_DET */
 			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
-			/* USBC_DET_EN */
-			MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26	0x0f058
 			/* USBC_DET_OVERWRITE */
 			MX6QDL_PAD_RGMII_RXC__GPIO6_IO30	0x0f058
+			/* USBC_DET_EN */
+			MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26	0x0f058
 		>;
 	};
 
-	pinctrl_usbc_id_1: usbc_id-1 {
+	pinctrl_usbc_id_1: usbcid1grp {
 		fsl,pins = <
 			/* USBC_ID */
 			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
 		>;
 	};
 
+	pinctrl_usbh_oc_1: usbhoc1grp {
+		fsl,pins = <
+			/* USBH_OC */
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b0
+		>;
+	};
+
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
@@ -692,6 +1102,40 @@
 		>;
 	};
 
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170b1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100b1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170f1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100f1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
+		>;
+	};
+
+	/* avoid backfeeding with removed card power */
+	pinctrl_usdhc1_sleep: usdhc1sleepgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x3000
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x3000
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x3000
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x3000
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x3000
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x3000
+		>;
+	};
+
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
@@ -730,135 +1174,136 @@
 		>;
 	};
 
-	pinctrl_weim_sram: weimsramgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
-			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
-			/* Data */
-			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00	0x1b0b0
-			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15	0x1b0b0
-			/* Address */
-			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
-			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
-			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
-			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
-			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
-			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
-			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
-			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
-			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
-			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
-			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
-			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
-			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
-			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
-			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
-			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
-		>;
-	};
-
-	pinctrl_weim_rdnwr: weimrdnwr {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CLK__GPIO1_IO10		0x0040
-			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23	0x130b0
-		>;
-	};
-
-	pinctrl_weim_npwe: weimnpwe {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x0040
-			MX6QDL_PAD_RGMII_TD2__GPIO6_IO22	0x130b0
-		>;
-	};
-
 	/* ADDRESS[16:18] [25] used as GPIO */
-	pinctrl_weim_gpio_1: weimgpio-1 {
+	pinctrl_weim_gpio_1: weimgpio1grp {
 		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
 			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
 			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
 			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
 			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
 			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
 			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
 			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
 		>;
 	};
 
 	/* ADDRESS[19:24] used as GPIO */
-	pinctrl_weim_gpio_2: weimgpio-2 {
+	pinctrl_weim_gpio_2: weimgpio2grp {
 		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
 			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
 			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
 		>;
 	};
 
 	/* DATA[16:31] used as GPIO */
-	pinctrl_weim_gpio_3: weimgpio-3 {
+	pinctrl_weim_gpio_3: weimgpio3grp {
 		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
 			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b0
 			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b0
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
-			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
 			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
-			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0
 			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x1b0b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
 			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0
 		>;
 	};
 
 	/* DQM[0:3] used as GPIO */
-	pinctrl_weim_gpio_4: weimgpio-4 {
+	pinctrl_weim_gpio_4: weimgpio4grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
 			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
-			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
 			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
 		>;
 	};
 
 	/* RDY used as GPIO */
-	pinctrl_weim_gpio_5: weimgpio-5 {
+	pinctrl_weim_gpio_5: weimgpio5grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0
 		>;
 	};
 
 	/* ADDRESS[16] DATA[30] used as GPIO */
-	pinctrl_weim_gpio_6: weimgpio-6 {
+	pinctrl_weim_gpio_6: weimgpio6grp {
 		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
 			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_weim_npwe: weimnpwegrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD2__GPIO6_IO22	0x130b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x0040
+		>;
+	};
+
+	pinctrl_weim_sram: weimsramgrp {
+		fsl,pins = <
+			/* Data */
+			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15	0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01	0x1b0b0
+			/* Address */
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+			/* Ctrl */
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_rdnwr: weimrdnwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23	0x130b0
+			MX6QDL_PAD_SD2_CLK__GPIO1_IO10		0x0040
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 648f5fcb72e6..2c1d6f28e695 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -35,7 +35,7 @@
 	pinctrl-0 = <&pinctrl_ecspi3>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "sst,sst25vf040b", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi
new file mode 100644
index 000000000000..702cd4a1b2e6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/*
+ * Special SoM hardware required which uses the pins from micro SD card. The
+ * pins SD3_DAT0 and SD3_DAT1 are muxed as can2 Tx and Rx. The signals for can2
+ * Tx and Rx are routed to the DHCOM UART1 rts/cts pins. Therefore the micro SD
+ * card must be disabled and the uart1 rts/cts must be output on other DHCOM
+ * pins, see uart1 and usdhc3 node below.
+ */
+&can2 {
+	status = "okay";
+};
+
+&gpio1 {
+	/*
+	 * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
+	 * GPIO line, however the i.MX6 UART driver assumes RX happens
+	 * during TX anyway and that it only controls drive enable DE
+	 * line. Hence, the RX is always enabled here.
+	 */
+	rs485-rx-en-hog {
+		gpio-hog;
+		gpios = <18 0>; /* GPIO Q */
+		line-name = "rs485-rx-en";
+		output-low;
+	};
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "DRC02-In1", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "DHCOM-E", "DRC02-In2", "DHCOM-H",
+		"DHCOM-I", "DRC02-HW0", "", "", "", "", "", "",
+		"", "", "", "", "DRC02-Out1", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "DRC02-Out2", "", "", "SOM-HW1", "",
+		"", "", "", "", "", "", "DRC02-HW2", "DRC02-HW1",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&uart1 {
+	/*
+	 * Due to the use of can2 the signals for can2 Tx and Rx are routed to
+	 * DHCOM UART1 rts/cts pins. Therefore this UART have to use DHCOM GPIOs
+	 * for rts/cts. So configure DHCOM GPIO I as rts and GPIO M as cts.
+	 */
+	/delete-property/ uart-has-rtscts;
+	cts-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; /* GPIO M */
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_dhcom_i &pinctrl_dhcom_m>;
+	pinctrl-names = "default";
+	rts-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+};
+
+&uart5 {
+	/*
+	 * On DRC02 this UART is used as RS485 interface and RS485_TX_En is
+	 * controlled by DHCOM GPIO P. So remove rts/cts pins and the property
+	 * uart-has-rtscts from this UART and add the DHCOM GPIO P pin via
+	 * rts-gpios. The RS485_RX_En is controlled by DHCOM GPIO Q, see gpio1
+	 * node above.
+	 */
+	/delete-property/ uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	pinctrl-0 = <&pinctrl_uart5_core &pinctrl_dhcom_p &pinctrl_dhcom_q>;
+	pinctrl-names = "default";
+	rts-gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; /* GPIO P */
+};
+
+&usbh1 {
+	disable-over-current;
+};
+
+&usdhc2 { /* SD card */
+	status = "okay";
+};
+
+&usdhc3 {
+	/*
+	 * Due to the use of can2 the micro SD card on module have to be
+	 * disabled, because the pins SD3_DAT0 and SD3_DAT1 are muxed as
+	 * can2 Tx and Rx.
+	 */
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-0 = <
+			/*
+			 * The following DHCOM GPIOs are used on this board.
+			 * Therefore, they have been removed from the list below.
+			 * I: uart1 rts
+			 * M: uart1 cts
+			 * P: uart5 rs485-tx-en
+			 * Q: uart5 rs485-rx-en
+			 */
+			&pinctrl_hog_base
+			&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+			&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+			&pinctrl_dhcom_g &pinctrl_dhcom_h
+			&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+			&pinctrl_dhcom_n &pinctrl_dhcom_o
+			&pinctrl_dhcom_r
+			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+		>;
+	pinctrl-names = "default";
+
+	pinctrl_uart5_core: uart5-core-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
new file mode 100644
index 000000000000..6248b126b557
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2021 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		compatible = "fixed-clock";
+	};
+
+	display_bl: display-bl {
+		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
+		compatible = "pwm-backlight";
+		default-brightness-level = <8>;
+		enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */
+		pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif &pinctrl_dhcom_g>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	gpio-keys {
+		#size-cells = <0>;
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* GPIO A */
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			pinctrl-0 = <&pinctrl_dhcom_a>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-1 {
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* GPIO B */
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			pinctrl-0 = <&pinctrl_dhcom_b>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-2 {
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; /* GPIO C */
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			pinctrl-0 = <&pinctrl_dhcom_c>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-3 {
+			gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; /* GPIO D */
+			label = "TA4-GPIO-D";
+			linux,code = <KEY_D>;
+			pinctrl-0 = <&pinctrl_dhcom_d>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		/*
+		 * Disable led-5, because GPIO E is
+		 * already used as touch interrupt.
+		 */
+		led-5 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* GPIO E */
+			pinctrl-0 = <&pinctrl_dhcom_e>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		led-6 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; /* GPIO F */
+			pinctrl-0 = <&pinctrl_dhcom_f>;
+			pinctrl-names = "default";
+		};
+
+		led-7 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* GPIO H */
+			pinctrl-0 = <&pinctrl_dhcom_h>;
+			pinctrl-names = "default";
+		};
+
+		led-8 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+
+	panel {
+		backlight = <&display_bl>;
+		compatible = "edt,etm0700g0edh6";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	sound {
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT";
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx-sgtl5000";
+		mux-ext-port = <3>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+};
+
+&audmux {
+	pinctrl-0 = <&pinctrl_audmux_ext>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "disabled";
+};
+
+/* 1G ethernet */
+/delete-node/ &ethphy0;
+&fec {
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy7>;
+	pinctrl-0 = <&pinctrl_enet_1G>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy7: ethernet-phy@7 { /* KSZ 9021 */
+			compatible = "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio1>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_ethphy7>;
+			pinctrl-names = "default";
+			reg = <7>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			rxdv-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&sw2_reg>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+		pinctrl-0 = <&pinctrl_dhcom_e>;
+		pinctrl-names = "default";
+		reg = <0x38>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pcie {
+	pinctrl-0 = <&pinctrl_pcie &pinctrl_dhcom_j>;
+	reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>; /* GPIO J */
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+};
+
+&usdhc2 { /* SD card */
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <
+			/*
+			 * The following DHCOM GPIOs are used on this board.
+			 * Therefore, they have been removed from the list below.
+			 * A: key TA1
+			 * B: key TA2
+			 * C: key TA3
+			 * D: key TA4
+			 * E: touchscreen
+			 * F: led6
+			 * G: backlight enable
+			 * H: led7
+			 * I: led8
+			 * J: PCIe reset
+			 */
+			&pinctrl_hog_base
+			&pinctrl_dhcom_k &pinctrl_dhcom_l
+			&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+			&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+		>;
+	pinctrl-names = "default";
+
+	pinctrl_audmux_ext: audmux-ext-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+		>;
+	};
+
+	pinctrl_enet_1G: enet-1G-grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+		>;
+	};
+
+	pinctrl_ethphy7: ethphy7-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0xb1 /* WOL */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0xb0 /* Reset */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0xb1 /* Int */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi
new file mode 100644
index 000000000000..4cd4cb9543c8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_YELLOW>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "DHCOM-A", "", "DHCOM-B", "PicoITX-In2", "", "",
+		"", "", "", "", "", "", "", "",
+		"DHCOM-R", "DHCOM-S", "DHCOM-Q", "DHCOM-T", "DHCOM-U", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "PicoITX-In1", "DHCOM-INT", "DHCOM-H",
+		"DHCOM-I", "PicoITX-HW2", "", "", "", "", "", "",
+		"", "", "", "", "PicoITX-Out1", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "PicoITX-Out2", "", "", "SOM-HW1", "",
+		"", "", "", "", "", "", "PicoITX-HW0", "PicoITX-HW1",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&iomuxc {
+	pinctrl-0 = <
+			/*
+			 * The following DHCOM GPIOs are used on this board.
+			 * Therefore, they have been removed from the list below.
+			 * I: yellow led
+			 */
+			&pinctrl_hog_base
+			&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+			&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+			&pinctrl_dhcom_g &pinctrl_dhcom_h
+			&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+			&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+			&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+		>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
new file mode 100644
index 000000000000..eaa87b333164
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
@@ -0,0 +1,850 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2021 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c1;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+		mmc2 = &usdhc4;
+		mmc3 = &usdhc1;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+		serial0 = &uart1;
+		serial1 = &uart5;
+		serial2 = &uart4;
+		serial3 = &uart2;
+		serial4 = &uart3;
+	};
+
+	memory@10000000 { /* Appropriate memory size will be filled by U-Boot */
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	reg_3p3v: regulator-3P3V {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3P3V";
+	};
+
+	reg_eth_vio: regulator-eth-vio {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 7 0>;
+		pinctrl-0 = <&pinctrl_enet_vio>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "eth_vio";
+		vin-supply = <&sw2_reg>;
+	};
+
+	/* OE pin of the latch is low active */
+	reg_latch_oe_on: regulator-latch-oe-on {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 22 0>;
+		regulator-always-on;
+		regulator-name = "latch_oe_on";
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 31 0>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "usb_h1_vbus";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "usb_otg_vbus";
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/*
+ * Special SoM hardware required which uses the pins from micro SD card. The
+ * pins SD3_DAT0 and SD3_DAT1 are muxed as can2 Tx and Rx. The signals for can2
+ * Tx and Rx are routed to the DHCOM UART1 rts/cts pins. So to enable can2 on
+ * the board device tree file, the micro SD card must be disabled and the uart1
+ * rts/cts must be disabled or output on other DHCOM pins.
+ */
+&can2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 { /* S25FL116K */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&fec {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-0 = <&pinctrl_enet_100M>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */
+			compatible = "ethernet-phy-id0007.c0f0",
+				     "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio4>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reg = <0>;
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "DHCOM-A", "", "DHCOM-B", "DHCOM-C", "", "",
+		"", "", "", "", "", "", "", "",
+		"DHCOM-R", "DHCOM-S", "DHCOM-Q", "DHCOM-T", "DHCOM-U", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"SOM-HW2", "", "", "SOM-HW0", "", "SOM-MEM1", "SOM-MEM0", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "DHCOM-G", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "DHCOM-E", "DHCOM-INT", "DHCOM-H",
+		"DHCOM-I", "DHCOM-L", "", "", "", "", "", "",
+		"", "", "", "", "DHCOM-F", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "DHCOM-V", "DHCOM-W", "", "DHCOM-O", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "DHCOM-D", "", "", "SOM-HW1", "",
+		"", "", "", "", "", "", "DHCOM-J", "DHCOM-K",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"DHCOM-M", "DHCOM-N", "", "", "", "", "", "",
+		"", "", "", "", "", "DHCOM-P", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	/*
+	 * Info: According to erratum ERR007805 clock frequency limit is 375000.
+	 * The erratum for i.MX6S/DL is here [1] and for i.MX6Q/D is here [2].
+	 * [1] https://www.nxp.com/docs/en/errata/IMX6SDLCE.pdf
+	 * [2] https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c2 {
+	/* Info: Clock frequency limit is 375000 (for details see i2c1) */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	/* Info: Clock frequency limit is 375000 (for details see i2c1) */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		reg = <0x3c>;
+
+		regulators {
+			sw1_reg: sw1 {
+				lltc,fb-voltage-divider = <100000 110000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1527272>;
+				regulator-min-microvolt = <787500>;
+				regulator-ramp-delay = <7000>;
+				regulator-suspend-mem-microvolt = <1040000>;
+			};
+
+			sw2_reg: sw2 {
+				lltc,fb-voltage-divider = <100000 28000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3657142>;
+				regulator-min-microvolt = <1885714>;
+				regulator-ramp-delay = <7000>;
+			};
+
+			sw3_reg: sw3 {
+				lltc,fb-voltage-divider = <100000 110000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1527272>;
+				regulator-min-microvolt = <787500>;
+				regulator-ramp-delay = <7000>;
+				regulator-suspend-mem-microvolt = <980000>;
+			};
+
+			sw4_reg: sw4 {
+				lltc,fb-voltage-divider = <100000 93100>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1659291>;
+				regulator-min-microvolt = <855571>;
+				regulator-ramp-delay = <7000>;
+			};
+
+			ldo1_reg: ldo1 {
+				lltc,fb-voltage-divider = <102000 29400>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3240306>;
+				regulator-min-microvolt = <3240306>;
+			};
+
+			ldo2_reg: ldo2 {
+				lltc,fb-voltage-divider = <100000 41200>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2484708>;
+				regulator-min-microvolt = <2484708>;
+			};
+		};
+	};
+
+	touchscreen@49 { /* TSC2004 */
+		compatible = "ti,tsc2004";
+		interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_tsc2004>;
+		pinctrl-names = "default";
+		reg = <0x49>;
+		vio-supply = <&reg_3p3v>;
+		status = "disabled";
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	rtc_i2c: rtc@56 {
+		compatible = "microcrystal,rv3029";
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_rtc>;
+		pinctrl-names = "default";
+		reg = <0x56>;
+	};
+};
+
+&pcie {
+	pinctrl-0 = <&pinctrl_pcie>;
+	pinctrl-names = "default";
+};
+
+&pwm1 {
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+};
+
+&reg_arm {
+	vin-supply = <&sw3_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
+&uart1 { /* DHCOM UART1 */
+	dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 { /* DHCOM UART3 */
+	pinctrl-0 = <&pinctrl_uart4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart5 { /* DHCOM UART2 */
+	pinctrl-0 = <&pinctrl_uart5>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	dr_mode = "host";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	pinctrl-names = "default";
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	dr_mode = "otg";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	pinctrl-names = "default";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usdhc2 { /* External SD card via DHCOM */
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&usdhc3 { /* Micro SD card on module */
+	cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	keep-power-in-suspend;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usdhc4 { /* eMMC on module */
+	bus-width = <8>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&weim {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	fsl,weim-cs-gpr = <&gpr>;
+	pinctrl-0 = <&pinctrl_weim &pinctrl_weim_cs0 &pinctrl_weim_cs1>;
+	pinctrl-names = "default";
+	/* It is necessary to setup 2x 64MB otherwise setting gpr fails */
+	ranges = <0 0 0x08000000 0x04000000>, /* CS0 */
+		 <1 0 0x0c000000 0x04000000>; /* CS1 */
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-0 = <
+			&pinctrl_hog_base
+			&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+			&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+			&pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
+			&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+			&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+			&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+		>;
+	pinctrl-names = "default";
+
+	pinctrl_hog_base: hog-base-grp {
+		fsl,pins = <
+			/* GPIOs for memory coding */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x120b0
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x120b0
+			/* GPIOs for hardware coding */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x120b0
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x120b0
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x120b0
+		>;
+	};
+
+	/* DHCOM GPIOs */
+	pinctrl_dhcom_a: dhcom-a-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x400120b0>;
+	};
+
+	pinctrl_dhcom_b: dhcom-b-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x400120b0>;
+	};
+
+	pinctrl_dhcom_c: dhcom-c-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x400120b0>;
+	};
+
+	pinctrl_dhcom_d: dhcom-d-grp {
+		fsl,pins = <MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x400120b0>;
+	};
+
+	pinctrl_dhcom_e: dhcom-e-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x400120b0>;
+	};
+
+	pinctrl_dhcom_f: dhcom-f-grp {
+		fsl,pins = <MX6QDL_PAD_DI0_PIN4__GPIO4_IO20	0x400120b0>;
+	};
+
+	pinctrl_dhcom_g: dhcom-g-grp {
+		fsl,pins = <MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x400120b0>;
+	};
+
+	pinctrl_dhcom_h: dhcom-h-grp {
+		fsl,pins = <MX6QDL_PAD_KEY_ROW0__GPIO4_IO07	0x400120b0>;
+	};
+
+	pinctrl_dhcom_i: dhcom-i-grp {
+		fsl,pins = <MX6QDL_PAD_KEY_COL1__GPIO4_IO08	0x400120b0>;
+	};
+
+	pinctrl_dhcom_j: dhcom-j-grp {
+		fsl,pins = <MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x400120b0>;
+	};
+
+	pinctrl_dhcom_k: dhcom-k-grp {
+		fsl,pins = <MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x400120b0>;
+	};
+
+	pinctrl_dhcom_l: dhcom-l-grp {
+		fsl,pins = <MX6QDL_PAD_KEY_ROW1__GPIO4_IO09	0x400120b0>;
+	};
+
+	pinctrl_dhcom_m: dhcom-m-grp {
+		fsl,pins = <MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x400120b0>;
+	};
+
+	pinctrl_dhcom_n: dhcom-n-grp {
+		fsl,pins = <MX6QDL_PAD_SD3_DAT4__GPIO7_IO01	0x400120b0>;
+	};
+
+	pinctrl_dhcom_o: dhcom-o-grp {
+		fsl,pins = <MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x400120b0>;
+	};
+
+	pinctrl_dhcom_p: dhcom-p-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x400120b0>;
+	};
+
+	pinctrl_dhcom_q: dhcom-q-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_CMD__GPIO1_IO18	0x400120b0>;
+	};
+
+	pinctrl_dhcom_r: dhcom-r-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_DAT0__GPIO1_IO16	0x400120b0>;
+	};
+
+	pinctrl_dhcom_s: dhcom-s-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_DAT1__GPIO1_IO17	0x400120b0>;
+	};
+
+	pinctrl_dhcom_t: dhcom-t-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_DAT2__GPIO1_IO19	0x400120b0>;
+	};
+
+	pinctrl_dhcom_u: dhcom-u-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_CLK__GPIO1_IO20	0x400120b0>;
+	};
+
+	pinctrl_dhcom_v: dhcom-v-grp {
+		fsl,pins = <MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x400120b0>;
+	};
+
+	pinctrl_dhcom_w: dhcom-w-grp {
+		fsl,pins = <MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x400120b0>;
+	};
+
+	pinctrl_dhcom_int: dhcom-int-grp {
+		fsl,pins = <MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x400120b0>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet_100M: enet-100M-grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_enet_vio: enet-vio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x120b0
+		>;
+	};
+
+	pinctrl_ethphy0: ethphy0-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0xb0 /* Reset */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0xb1 /* Int */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
+		>;
+	};
+
+	pinctrl_pcie: pcie-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1 /* Wake */
+		>;
+	};
+
+	pinctrl_pmic: pmic-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_rtc: rtc-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x120b0
+		>;
+	};
+
+	pinctrl_tsc2004: tsc2004-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x120b0
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__UART1_CTS_B		0x4001b0b1
+			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x4001b0b1
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24		0x4001b0b1
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25		0x4001b0b1
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x4001b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B	0x4001b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x120b0
+			MX6QDL_PAD_EIM_D30__USB_H1_OC		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotg-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x120b0
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x120b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_weim: weim-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0a6
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0a6
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0a6
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0a6
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0a6
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0a6
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0a6
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0a6
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0a6
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0a6
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0a6
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0a6
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0a6
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0a6
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0a6
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0a6
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x130b0
+			MX6QDL_PAD_EIM_LBA__EIM_LBA_B		0xb060 /* LE */
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0a6
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0a6 /* WE */
+		>;
+	};
+
+	pinctrl_weim_cs0: weim-cs0-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_cs1: weim-cs1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B		0xb0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-ds.dtsi b/arch/arm/boot/dts/imx6qdl-ds.dtsi
new file mode 100644
index 000000000000..f7e517555697
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-ds.dtsi
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2021 Dillon Min <dillon.minfei@gmail.com>
+//
+// Based on imx6qdl-sabresd.dtsi which is:
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vsync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&ov2659_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_gpio>;
+	status = "okay";
+
+	m25p80: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	ov2659: camera@30 {
+		compatible = "ovti,ov2659";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov2659>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xvclk";
+		reg = <0x30>;
+		powerdown-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		status = "okay";
+
+		port {
+			ov2659_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				link-frequencies = /bits/ 64 <70000000>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+		>;
+	};
+
+	pinctrl_ecspi1_gpio: ecspi1grpgpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10         0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+		>;
+	};
+
+	pinctrl_ov2659: ov2659grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b0
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1grpgpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
+		>;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	status = "disabled";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
index 828cf3e39784..c4e146f3341b 100644
--- a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
@@ -126,7 +126,7 @@
 		compatible = "nxp,pca8574";
 		reg = <0x3a>;
 		gpio-controller;
-		#gpio-cells = <1>;
+		#gpio-cells = <2>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
index 7228b894a763..ee2dd75cead6 100644
--- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
@@ -46,14 +46,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_som_leds>;
 
-		green {
+		led-green {
 			label = "som:green";
 			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "on";
 		};
 
-		red {
+		led-red {
 			label = "som:red";
 			gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 3c04b5a4f3cb..e75e1a5364b8 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -71,14 +71,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
@@ -626,6 +626,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
 			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 959d8ac2e393..47d9a8d08197 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -32,8 +32,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		user-pb {
 			label = "user_pb";
@@ -82,20 +80,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -139,6 +137,16 @@
 		regulator-always-on;
 	};
 
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_usb_otg_vbus: regulator-usb-otg-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_otg_vbus";
@@ -172,6 +180,7 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
 	status = "okay";
 };
 
@@ -614,7 +623,6 @@
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
 			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
 		>;
 	};
 
@@ -704,6 +712,12 @@
 		>;
 	};
 
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
@@ -730,6 +744,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
 			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0 /* OTG_PWR_EN */
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 8072ed47c6bb..fb1d29abe099 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -32,8 +32,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		user-pb {
 			label = "user_pb";
@@ -82,20 +80,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -131,6 +129,16 @@
 		regulator-always-on;
 	};
 
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_usb_h1_vbus: regulator-usb-h1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_h1_vbus";
@@ -172,6 +180,7 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
 	status = "okay";
 };
 
@@ -602,7 +611,6 @@
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
 			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
 		>;
 	};
 
@@ -693,6 +701,12 @@
 		>;
 	};
 
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 8c9bcdd39830..4e20cb97058e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -33,8 +33,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		user-pb {
 			label = "user_pb";
@@ -83,20 +81,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -139,6 +137,16 @@
 			regulator-always-on;
 		};
 
+		reg_can1_stby: regulator-can1-stby {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_reg_can1>;
+			regulator-name = "can1_stby";
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
 		reg_usb_h1_vbus: regulator@2 {
 			compatible = "regulator-fixed";
 			reg = <2>;
@@ -202,6 +210,7 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
 	status = "okay";
 };
 
@@ -689,7 +698,6 @@
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
 			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
 		>;
 	};
 
@@ -788,6 +796,12 @@
 		>;
 	};
 
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
@@ -814,6 +828,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
 			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index e5d803d023c8..0fa4b8eeddee 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -67,8 +67,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		user-pb {
 			label = "user_pb";
@@ -117,7 +115,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
 			default-state = "on";
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 290a607fede9..77ae611b817a 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -24,8 +24,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		user-pb {
 			label = "user_pb";
@@ -74,20 +72,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index c15b9cc63bf8..7f16c602cc07 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -113,14 +113,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
@@ -687,6 +687,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
 			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index 093a219a77ae..46cf4080fec3 100644
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -91,8 +91,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		user-pb {
 			label = "user_pb";
@@ -141,20 +139,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -634,7 +632,6 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
 	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index e1c8dd233cab..a74cde050158 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -75,8 +75,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		user-pb {
 			label = "user_pb";
@@ -125,7 +123,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 3cd2e717c1da..9fc79af2bc9a 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -72,8 +72,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		user-pb {
 			label = "user_pb";
@@ -122,20 +120,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
@@ -469,6 +467,11 @@
 		};
 	};
 
+	crypto@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+
 	imu@6a {
 		compatible = "st,lsm9ds1-imu";
 		reg = <0x6a>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
index 21c68a55bcb9..955a51226eda 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -23,8 +23,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		user-pb {
 			label = "user_pb";
@@ -73,14 +71,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index ed4e22259959..218d6e667ed2 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -26,12 +26,10 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
@@ -76,20 +74,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
index 797f160249f7..40e235e315cc 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -24,8 +24,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		user-pb {
 			label = "user_pb";
@@ -74,20 +72,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
index 4cd7d290f5b2..82f47c295b08 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -23,12 +23,10 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
@@ -73,14 +71,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
index b167b33bd108..85aeebc9485d 100644
--- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -51,16 +51,6 @@
 		vin-supply = <&reg_3p3v_s5>;
 	};
 
-	reg_3p3v_s0: regulator-3p3v-s0 {
-		compatible = "regulator-fixed";
-		regulator-name = "V_3V3_S0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&reg_3p3v_s5>;
-	};
-
 	reg_3p3v_s5: regulator-3p3v-s5 {
 		compatible = "regulator-fixed";
 		regulator-name = "V_3V3_S5";
@@ -258,8 +248,8 @@
 	status = "okay";
 
 	/* default boot source: workaround #1 for errata ERR006282 */
-	smarc_flash: spi-flash@0 {
-		compatible = "winbond,w25q16dw", "jedec,spi-nor";
+	smarc_flash: flash@0 {
+		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <20000000>;
 	};
@@ -270,7 +260,23 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-handle = <&ethphy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
 };
 
 &i2c_intern {
@@ -397,7 +403,7 @@
 
 /* HDMI_CTRL */
 &i2c2 {
-	clock-frequency = <375000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 };
diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
new file mode 100644
index 000000000000..78555a618851
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
@@ -0,0 +1,535 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
+		rtc0 = &rtc0;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	beeper: gpio-beeper {
+		compatible = "gpio-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobeeper>;
+		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_buttons: gpio-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+
+		button1 {
+			label = "s6";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button2 {
+			label = "s7";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button3 {
+			label = "s8";
+			linux,code = <KEY_F8>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_mba6_3p3v: regulator-mba6-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-mba6-3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regpcie>;
+		regulator-name = "supply-pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* PCIE.PWR_EN */
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_mba6_3p3v>;
+	};
+
+	reg_vcc3v3_audio: regulator-vcc3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3-audio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_mba6_3p3v>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audmux>;
+		model = "imx-audio-tlv320aic32x4";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&tlv320aic32x4>;
+		audio-asrc = <&asrc>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	ssi0 {
+		fsl,audmux-port = <MX31_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+				IMX_AUDMUX_V2_PTCR_TFSDIR |
+				IMX_AUDMUX_V2_PTCR_TFSEL(MX31_AUDMUX_PORT3_SSI_PINS_3) |
+				IMX_AUDMUX_V2_PTCR_TCLKDIR |
+				IMX_AUDMUX_V2_PTCR_TCSEL(MX31_AUDMUX_PORT3_SSI_PINS_3))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT3_SSI_PINS_3)
+		>;
+	};
+
+	aud3 {
+		fsl,audmux-port = <MX31_AUDMUX_PORT3_SSI_PINS_3>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_mba6>;
+	cs-gpios = <&gpio3 19 0>, <&gpio3 24 0>;
+};
+
+&fec {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <100000>;
+			micrel,force-master;
+			max-speed = <1000>;
+		};
+	};
+};
+
+&i2c1 {
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "mclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		ldoin-supply = <&reg_vcc3v3_audio>;
+		iov-supply = <&reg_mba6_3p3v>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	power-active-high;
+	over-current-active-low;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+/* SD card slot */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_mba6_3p3v>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	/* does not work on unmodified starter kit */
+	/* fsl,ext-reset-output; */
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0xb099
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0xb099
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0xb099
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0xb099
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0xb0 /* CLK */
+		>;
+	};
+
+	pinctrl_ecspi1_mba6: ecspimba6grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0xb099 /* eCSPI1 SS2 */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* FEC phy IRQ */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x00011008
+			/* FEC phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25   0x1b099
+			/* DSE = 100, 100k up, SPEED = MED */
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0xb0a0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0xb0a0
+			/* DSE = 111, pull 100k up */
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0xb038
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0xb038
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0xb038
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0xb038
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0xb038
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0xb038
+			/* DSE = 111, pull external */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x0038
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x0038
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x0038
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x0038
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x0038
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x0038
+			/* HYS = 1, DSE = 111, 100k up, SPEED = HIGH */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0f0
+		>;
+	};
+
+	pinctrl_gpiobeeper: gpiobeepergrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0xb099
+		>;
+	};
+
+	pinctrl_gpiobuttons: gpiobuttongrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0001b099
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b099
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b099
+		>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0xb099 /* LED V15 */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb099 /* LED V16 */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
+
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
+
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b099
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0001b099
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0001b099
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0001b099
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0001b099
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0001b099
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x0001b099
+
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0001b099
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b099
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0001b099
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0001b099
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0001b099
+
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b099
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b099
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b099
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x0001b099
+
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x0001b099
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x0001b099
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x0001b099
+
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b099
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x0001b099
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* HYS = 1, DSE = 110, 100k up, SPEED = HIGH (11)*/
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x001b0f0 /* #PCIE.WAKE */
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x001b0f0 /* #PCIE.RST */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x001b0f0 /* #PCIE.DIS */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_regpcie: regpciegrp {
+		fsl,pins = <
+			/* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D30__UART3_CTS_B   0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			/* CLK: 47k Pup SPD_LOW DSE 40Ohm SRE_FAST HYS */
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x00017071
+			/* SD2: 47k Pup SPD_LOW DSE 80Ohm SRE_FAST HYS */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x00017059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017059
+
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x0001b099 /* usdhc2 CD */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02  0x0001b099 /* usdhc2 WP */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC  0x0001b0b0
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID   0x00017059
+			MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x0001b099
+		>;
+	};
+
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			 /* Watchdog out */
+			MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x0000b099
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
new file mode 100644
index 000000000000..df8fa169e9f6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>;
+};
+
+&i2c1 {
+	lm75: temperature-sensor@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	m24c64_57: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
new file mode 100644
index 000000000000..7d1cd7454c7f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	lm75: temperature-sensor@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	m24c64_57: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index d526f01a2c52..6d4eab1942b9 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -85,31 +85,31 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_leds>;
 
-		j14-pin1 {
+		led-j14-pin1 {
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 			retain-state-suspended;
 			default-state = "off";
 		};
 
-		j14-pin3 {
+		led-j14-pin3 {
 			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 			retain-state-suspended;
 			default-state = "off";
 		};
 
-		j14-pins8-9 {
+		led-j14-pins8-9 {
 			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
 			retain-state-suspended;
 			default-state = "off";
 		};
 
-		j46-pin2 {
+		led-j46-pin2 {
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
 			retain-state-suspended;
 			default-state = "off";
 		};
 
-		j46-pin3 {
+		led-j46-pin3 {
 			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			retain-state-suspended;
 			default-state = "off";
@@ -179,7 +179,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
@@ -190,23 +190,34 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <3000>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <3000>;
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index a0917823c244..81a9a302aec1 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -181,13 +181,13 @@
 	leds {
 		compatible = "gpio-leds";
 
-		speaker-enable {
+		led-speaker-enable {
 			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 			retain-state-suspended;
 			default-state = "off";
 		};
 
-		ttymxc4-rs232 {
+		led-ttymxc4-rs232 {
 			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
 			retain-state-suspended;
 			default-state = "on";
@@ -321,7 +321,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
@@ -332,23 +332,34 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <3000>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <3000>;
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index 92d09a3ebe0e..000e9dc97b1a 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -252,7 +252,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
@@ -263,6 +263,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 1243677b5f97..731759bdd7f5 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -237,7 +237,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
@@ -265,23 +265,34 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <3000>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <3000>;
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
new file mode 100644
index 000000000000..0020dbb1722c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/ {
+	display: display0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0>;
+		interface-pix-fmt = "rgb24";
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&peb_panel_lcd_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "edt,etm0700g0edh6";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_pwr>;
+		power-supply = <&reg_display>;
+		enable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			peb_panel_lcd_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+
+	reg_display: regulator-peb-display {
+		compatible = "regulator-fixed";
+		regulator-name = "peb-display";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&i2c1 {
+	edt_ft5x06: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		reg = <0x38>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		status = "disabled";
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_disp0: disp0grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x1b080
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_disp0_pwr: disp0pwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
+		>;
+	};
+
+	pinctrl_edt_ft5x06: edtft5x06grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02			0xb0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi
new file mode 100644
index 000000000000..037b60197598
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		status = "disabled";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+
+		sleep {
+			label = "Sleep Button";
+			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
+	user_leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>;
+		status = "disabled";
+
+		user-led1 {
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+
+		user-led2 {
+			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+
+		user-led3 {
+			gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_user_leds: userledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi
new file mode 100644
index 000000000000..84f884d6e55b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Yunus Bas <y.bas@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	reg_wl_en: regulator-wl-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wl>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		status = "disabled";
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_bt>;
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&usdhc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_wl>;
+	vmmc-supply = <&reg_wl_en>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	status = "disabled";
+
+	brmcf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl_uart3_bt: uart3grp-bt {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0xb0b1	/* BT ENABLE */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0xb0b1	/* DEV WAKEUP */
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0xb0b1  /* HOST WAKEUP */
+		>;
+	};
+
+	pinctrl_usdhc3_wl: usdhc3grp-wl {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_wl: wlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02      0xb0b1	/* WLAN ENABLE */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
index 019938562aa9..1a599c294ab8 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
@@ -25,17 +25,17 @@
 		pinctrl-0 = <&pinctrl_gpioleds>;
 		status = "disabled";
 
-		red {
+		led-red {
 			label = "phyboard-mira:red";
 			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-green {
 			label = "phyboard-mira:green";
 			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-blue {
 			label = "phyboard-mira:blue";
 			gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
@@ -145,8 +145,11 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <400000>;
 	status = "disabled";
 
@@ -185,8 +188,11 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
 	status = "disabled";
 };
@@ -256,6 +262,7 @@
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
+	disable-wp;
 	status = "disabled";
 };
 
@@ -299,6 +306,20 @@
 		>;
 	};
 
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
@@ -306,10 +327,10 @@
 		>;
 	};
 
-	pinctrl_i2c1: i2c1grp {
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
 		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
index d434868e870a..51d28e275aa6 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
@@ -78,7 +78,8 @@
 	ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
 			IMX_AUDMUX_V2_PTCR_TFSEL(4) |
 			IMX_AUDMUX_V2_PTCR_TCLKDIR |
 			IMX_AUDMUX_V2_PTCR_TCSEL(4))
@@ -89,7 +90,7 @@
 	pins5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
-			0x00000000
+			IMX_AUDMUX_V2_PTCR_SYN
 			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
 		>;
 	};
@@ -164,6 +165,7 @@
 
 &usbotg {
 	status = "okay";
+	dr_mode = "peripheral";
 };
 
 &usdhc2 {
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 7a1e53195785..80adb2a02cc9 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -31,6 +31,8 @@
 
 		reg_usb_h1_vbus: regulator@1 {
 			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1_vbus>;
 			reg = <1>;
 			regulator-name = "usb_h1_vbus";
 			regulator-min-microvolt = <5000000>;
@@ -41,14 +43,16 @@
 	};
 
 	gpio_leds: leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
 		compatible = "gpio-leds";
 
-		green {
+		led_green: led-green {
 			label = "phyflex:green";
 			gpios = <&gpio1 30 0>;
 		};
 
-		red {
+		led_red: led-red {
 			label = "phyflex:red";
 			gpios = <&gpio2 31 0>;
 		};
@@ -122,6 +126,8 @@
 	};
 
 	pmic@58 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
 		compatible = "dlg,da9063";
 		reg = <0x58>;
 		interrupt-parent = <&gpio2>;
@@ -199,6 +205,19 @@
 				regulator-always-on;
 			};
 		};
+
+		da9063_rtc: rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		da9063_wdog: watchdog {
+			compatible = "dlg,da9063-watchdog";
+		};
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+			status = "disabled";
+		};
 	};
 };
 
@@ -215,25 +234,13 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
 	imx6q-phytec-pfla02 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
-				MX6QDL_PAD_SD4_DAT1__GPIO2_IO09  0x80000000 /* PMIC interrupt */
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
-				MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
-			>;
-		};
-
 		pinctrl_ecspi3: ecspi3grp {
 			fsl,pins = <
 				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
 				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
 				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x80000000 /* CS0 */
 			>;
 		};
 
@@ -255,6 +262,7 @@
 				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
 				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x80000000 /* Reset GPIO */
 			>;
 		};
 
@@ -308,16 +316,27 @@
 			>;
 		};
 
+		pinctrl_leds: ledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000 /* Green LED */
+				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x80000000 /* Red LED */
+			>;
+		};
+
 		pinctrl_pcie: pciegrp {
 			fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000>;
 		};
 
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <MX6QDL_PAD_SD4_DAT1__GPIO2_IO09	0x80000000>; /* PMIC interrupt */
+		};
+
 		pinctrl_uart3: uart3grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
 				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
 			>;
 		};
 
@@ -328,9 +347,9 @@
 			>;
 		};
 
-		pinctrl_usbh1: usbh1grp {
+		pinctrl_usbh1_vbus: usbh1vbusgrp {
 			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__USB_H1_PWR		0x80000000
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
 			>;
 		};
 
@@ -404,6 +423,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
@@ -415,8 +435,6 @@
 
 &usbh1 {
 	vbus-supply = <&reg_usb_h1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
 	status = "disabled";
 };
 
@@ -433,6 +451,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd1_reg>;
 	status = "disabled";
 };
 
@@ -442,5 +461,6 @@
 		     &pinctrl_usdhc3_cdwp>;
 	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd0_reg>;
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index a80aa08a37cb..28a805384668 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -78,8 +78,11 @@
 };
 
 &i2c3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <400000>;
 	status = "okay";
 
@@ -113,6 +116,16 @@
 			dlg,use-sw-pm;
 		};
 
+		thermal {
+			compatible = "dlg,da9062-thermal";
+			status = "disabled";
+		};
+
+		gpio {
+			compatible = "dlg,da9062-gpio";
+			status = "disabled";
+		};
+
 		regulators {
 			vdd_arm: buck1 {
 				regulator-name = "vdd_arm";
@@ -259,6 +272,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x4001b8b1
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x4001b8b1
+		>;
+	};
+
 	pinctrl_ecspi1: ecspi1grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
diff --git a/arch/arm/boot/dts/imx6qdl-pico.dtsi b/arch/arm/boot/dts/imx6qdl-pico.dtsi
index 5de4ccb97916..c39a9ebdaba1 100644
--- a/arch/arm/boot/dts/imx6qdl-pico.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-pico.dtsi
@@ -176,7 +176,18 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &hdmi {
@@ -222,7 +233,6 @@
 		pinctrl-0 = <&pinctrl_ov5645>;
 		reg = <0x3c>;
 		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-names = "xclk";
 		clock-frequency = <24000000>;
 		vdddo-supply = <&reg_1p8v>;
 		vdda-supply = <&reg_2p8v>;
diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
index 19578f660b09..f0db0d4471f4 100644
--- a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
@@ -94,6 +94,9 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <8>;
 	non-removable;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index de514eb5aa99..f804ff95a6ad 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -55,7 +55,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		led0: usr {
+		led0: led-usr {
 			label = "usr";
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 5e58740d40c5..f79caa36f3d2 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -21,7 +21,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		user {
+		led-user {
 			label = "debug";
 			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
 		};
@@ -272,7 +272,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
 	status = "disabled"; /* pin conflict with WEIM NOR */
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p32", "jedec,spi-nor";
@@ -295,6 +295,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
@@ -451,8 +452,8 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_egalax_int>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index fdc3aa9d544d..12573e1f917c 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -1,43 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/clock/imx6qdl-clock.h>
@@ -49,6 +14,11 @@
 		stdout-path = &uart2;
 	};
 
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
+	};
+
 	memory@10000000 {
 		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
@@ -313,7 +283,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
@@ -324,20 +294,30 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <3000>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <3000>;
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index f824c9abd11a..53b080c97f2d 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -97,8 +97,11 @@
 		compatible = "fsl,imx6q-sabresd-wm8962",
 			   "fsl,imx-audio-wm8962";
 		model = "wm8962-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
 		ssi-controller = <&ssi2>;
 		audio-codec = <&codec>;
+		audio-asrc = <&asrc>;
 		audio-routing =
 			"Headphone Jack", "HPOUTL",
 			"Headphone Jack", "HPOUTR",
@@ -127,7 +130,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		red {
+		led-red {
 			gpios = <&gpio1 2 0>;
 			default-state = "on";
 		};
@@ -194,7 +197,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p32", "jedec,spi-nor";
@@ -308,8 +311,8 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
 	};
 
 	ov5640: camera@3c {
@@ -447,8 +450,8 @@
 		compatible = "eeti,egalax_ts";
 		reg = <0x04>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <7 2>;
-		wakeup-gpios = <&gpio6 7 0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
 	};
 
 	magnetometer@e {
@@ -545,6 +548,13 @@
 			>;
 		};
 
+		pinctrl_hp: hpgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_RST__GPIO7_IO08          0x1b0b0
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x1b0b0
+			>;
+		};
+
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
 				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
new file mode 100644
index 000000000000..b81799d7076a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/ {
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <65000>;
+		touchscreen-inverted-y;
+		touchscreen-swapped-x-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+};
+
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_touch>;
+		pinctrl-names ="default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI			0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO			0x000b1
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK			0x000b1
+			/* *no* external pull up */
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x40000058
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* external pull up */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x10040
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi
new file mode 100644
index 000000000000..2731faede1cb
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	aliases {
+		can0 = &can1;
+		can1 = &can2;
+		mdio-gpio0 = &mdio;
+		nand = &gpmi;
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, /* 24V */
+		              <&adc 1>; /* temperature */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "D1";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "D2";
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "D3";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mdio: mdio {
+		compatible = "microchip,mdio-smi0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>,
+			<&gpio1 22 GPIO_ACTIVE_HIGH>;
+
+		switch@0 {
+			compatible = "microchip,ksz8873";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_switch>;
+			interrupt-parent = <&gpio3>;
+			interrupt = <30 IRQ_TYPE_LEVEL_HIGH>;
+			reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			reg = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports@0 {
+					reg = <0>;
+					phy-mode = "internal";
+					label = "lan1";
+				};
+
+				ports@1 {
+					reg = <1>;
+					phy-mode = "internal";
+					label = "lan2";
+				};
+
+				ports@2 {
+					reg = <2>;
+					label = "cpu";
+					ethernet = <&fec>;
+					phy-mode = "rmii";
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+
+	};
+
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v0>;
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_24v0: regulator-24v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "24v0";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can1_stby>;
+		regulator-name = "can1-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can2_stby>;
+		regulator-name = "can2-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_tft_vcom: regulator-tft-vcom {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 20000 0>;
+		regulator-name = "tft_vcom";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-always-on;
+		voltage-table = <3600000 26>;
+	};
+
+	reg_vcc_mmc: regulator-vcc-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc>;
+		vin-supply = <&reg_3v3>;
+		regulator-name = "mmc_vcc_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+	};
+
+	reg_vcc_mmc_io: regulator-vcc-mmc-io {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc_io>;
+		vin-supply = <&reg_5v0>;
+		regulator-name = "mmc_io_supply";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		states = <1800000 0x1>, <3300000 0x0>;
+		startup-delay-us = <100>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <54000000>;
+		reg = <0>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc: adc@0 {
+		compatible = "microchip,mcp3002";
+		reg = <0>;
+		vref-supply = <&reg_3v3>;
+		spi-max-frequency = <1000000>;
+		#io-channel-cells = <1>;
+	};
+};
+
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_3v3>;
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	i2c_rtc: rtc@51 {
+		compatible = "nxp,pcf85063";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&pwm3 {
+	/* used for LCD contrast control */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_5v0>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* no usbh2 */
+&usbphynop1 {
+	status = "disabled";
+};
+
+/* no usbh3 */
+&usbphynop2 {
+	status = "disabled";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5v0>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	cap-power-off-card;
+	full-pwr-cycle;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	mmc-ddr-1_8v;
+	vmmc-supply = <&reg_vcc_mmc>;
+	vqmmc-supply = <&reg_vcc_mmc_io>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX			0x3008
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX			0x1b000
+		>;
+	};
+
+	pinctrl_can1_stby: can1stbygrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31			0x13008
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
+		>;
+	};
+
+	pinctrl_can2_stby: can2stbygrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11			0x13008
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0xb1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0xb1
+			/* *no* external pull up */
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24			0x58
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO			0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI			0xb1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK			0xb1
+			/* external pull up */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x58
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* RMII 50 MHz */
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x100f5
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x100f5
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x100c0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x100c0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x100f5
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x100f5
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05			0x58
+			/* GPIO for "link active" */
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24		0x3038
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE			0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE			0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B		0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B		0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B		0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B			0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B			0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00		0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01		0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02		0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03		0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04		0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05		0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06		0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			/* external 10 k pull up */
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x40010878
+			/* external 10 k pull up */
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x40010878
+		>;
+	};
+
+	pinctrl_mdio: mdiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__GPIO1_IO22		0x100b1
+			MX6QDL_PAD_ENET_MDC__GPIO1_IO31			0xb1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT			0x58
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT			0x58
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30			0xb0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			/* SoC internal pull up required */
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17059
+			/* SoC internal pull up required */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01			0x1b040
+			/* SoC internal pull up required */
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00			0x1b040
+		>;
+	};
+
+	pinctrl_vcc_mmc: vccmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08			0x58
+		>;
+	};
+
+	pinctrl_vcc_mmc_io: vccmmciogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13			0x58
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi b/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi
new file mode 100644
index 000000000000..48c9ce051f47
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2021 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	display {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "logictechno,lttd800480070-l2rt";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-solidsense.dtsi b/arch/arm/boot/dts/imx6qdl-solidsense.dtsi
new file mode 100644
index 000000000000..234827e554d0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-solidsense.dtsi
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2021 Russell King <rmk@armlinux.org.uk>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_solidsense_leds>;
+
+		/* Red/Green LED1 - next to WiFi SMA */
+		led-11 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Red/Green LED2 - next to GPS SMA */
+		led-21 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-22 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&audio {
+	status = "disabled";
+};
+
+&ecspi2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>, <&pinctrl_solidsense_hog>;
+
+	solidsense {
+		pinctrl_solidsense_hog: solidsense-hog {
+			fsl,pins = <
+				/* Nordic RESET_N */
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x400130b1
+				/* Nordic Chip 1 SWDIO - GPIO 125 */
+				MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x400130b1
+				/* Nordic Chip 1 SWDCLK - GPIO 59 */
+				/* already claimed in the HB2 hogs */
+				/* MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 */
+				/* Nordic Chip 2 SWDIO - GPIO 81 */
+				MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x400130b1
+				/* Nordic Chip 2 SWCLK - GPIO 82 */
+				MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x400130b1
+			>;
+		};
+
+		pinctrl_solidsense_leds: solidsense-leds {
+			fsl,pins = <
+				/* Red LED 1 - GPIO 58 */
+				MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x400130b1
+				/* Green LED 1 - GPIO 55 */
+				MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x400130b1
+				/* Red LED 2 - GPIO 57 */
+				MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x400130b1
+				/* Green LED 2 - GPIO 56 */
+				MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x400130b1
+			>;
+		};
+
+		pinctrl_solidsense_uart2: solidsense-uart2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_solidsense_uart3: solidsense-uart3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "disabled";
+};
+
+&sgtl5000 {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_solidsense_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_solidsense_uart3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
index 0ad8ccde0cf8..ce543e325cd3 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -54,7 +54,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
 	phy-mode = "rgmii-id";
-	phy-reset-duration = <2>;
+
+	/*
+	 * The PHY seems to require a long-enough reset duration to avoid
+	 * some rare issues where the PHY gets stuck in an inconsistent and
+	 * non-functional state at boot-up. 10ms proved to be fine .
+	 */
+	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
@@ -77,6 +83,16 @@
 			qca,clk-out-frequency = <125000000>;
 			qca,smarteee-tw-us-1g = <24>;
 		};
+
+		/*
+		 * ADIN1300 (som rev 1.9 or later) is always at address 1. It
+		 * will be enabled automatically by U-Boot if detected.
+		 */
+		ethernet-phy@1 {
+			reg = <1>;
+			adi,phy-output-clock = "125mhz-free-running";
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
index b18b83ac6aee..344ea935c7da 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
@@ -20,7 +20,7 @@
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	m25p80: flash@0 {
@@ -52,6 +52,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_recovery: i2c1recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b899
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b899
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
@@ -59,6 +66,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
index b679bec78e6c..aff46f3040c1 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
@@ -4,9 +4,21 @@
  * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
+&fec {
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+};
+
 &i2c1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
 	status = "okay";
 
@@ -24,5 +36,20 @@
 		compatible = "st,24c64", "atmel,24c64";
 		reg = <0x50>;
 		pagesize = <32>;
+		vcc-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	/*
+	 * This pinmuxing is required for the ERR006687 workaround. Board
+	 * DTS files that enable the FEC controller with
+	 * fsl,err006687-workaround-present must include this group.
+	 */
+	pinctrl_enet_fix: enetfixgrp {
+		fsl,pins = <
+			/* ENET ping patch */
+			MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
index 49c472285c06..a3f6543c3aaa 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
@@ -4,9 +4,14 @@
  * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 &i2c3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
 	status = "okay";
 
@@ -24,5 +29,6 @@
 		compatible = "st,24c64", "atmel,24c64";
 		reg = <0x50>;
 		pagesize = <32>;
+		vcc-supply = <&reg_3p3v>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
index e6aa0c33754d..1e0a041e9f60 100644
--- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
@@ -73,13 +73,13 @@
 			default-state = "off";
 		};
 
-		en-usb-5v {
+		en-usb-5v-led {
 			label = "en-usb-5v";
 			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		sel_dc_usb {
+		sel-dc-usb-led {
 			label = "sel_dc_usb";
 			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -192,6 +192,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	fsl,err006687-workaround-present;
@@ -226,7 +227,7 @@
 		reg = <0x28>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		ngpio = <32>;
+		ngpios = <62>;
 	};
 
 	sgtl5000: codec@a {
@@ -506,7 +507,6 @@
 };
 
 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
index 410972e1dca9..99ec7a838f8d 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
@@ -85,7 +85,7 @@
 };
 
 &i2c3 {
-	rtc: mcp7940x@6f {
+	rtc: rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index 362e65ccaa78..a197bac95cba 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -92,7 +92,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		user_led: user {
+		user_led: led-user {
 			label = "Heartbeat";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_user_led>;
@@ -259,28 +259,11 @@
 		&gpio3 19 GPIO_ACTIVE_HIGH
 	>;
 	status = "disabled";
-
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <54000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <54000000>;
-	};
 };
 
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>;
-	clocks = <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET>,
-		 <&clks IMX6QDL_CLK_ENET_REF>,
-		 <&clks IMX6QDL_CLK_ENET_REF>;
-	clock-names = "ipg", "ahb", "ptp", "enet_out";
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 	phy-reset-post-delay = <10>;
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index d07d8f83456d..93a8123da27d 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -5,6 +5,8 @@
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	aliases {
 		backlight = &backlight;
@@ -226,6 +228,7 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
 			>;
 		};
 
@@ -292,7 +295,7 @@
 	pinctrl-0 = <&pinctrl_usbh>;
 	vbus-supply = <&reg_usb_h1_vbus>;
 	clocks = <&clks IMX6QDL_CLK_CKO>;
-	status = "okay";
+	status = "disabled";
 };
 
 &usbotg {
@@ -304,7 +307,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi
new file mode 100644
index 000000000000..f505f2704530
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 Protonic Holland
+ */
+
+/ {
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+		autorepeat;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	panel {
+		compatible = "kyo,tcg121xglp";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ9031RNX PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
+			"CAM2_MIRROR", "", "", "SMBALERT",
+		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
+			"SD1_DATA3", "ETH_MDIO", "",
+		"", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
+			"CAN2_SR", "CAN2_TX", "CAN2_RX",
+		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
+			"HITCH_IN_OUT",
+		"LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",
+			"ISB_LED";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
+			"I2S_BITCLK", "I2S_DOUT",
+		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
+			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
+			"ITU656_D6", "ITU656_D7", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
+			"RGMII_TD3",
+		"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
+			"RGMII_RD2", "RGMII_RD3", "", "";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL		0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK		0x10030
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x10030
+			/* Phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x1b0b1
+		>;
+	};
+
+	pinctrl_gpiokeys: gpiokeygrp {
+		fsl,pins = <
+			/* nON_SWITCH */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index eb25d21a2ace..c4e6cf0527ba 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -16,18 +16,37 @@
 		stdout-path = &uart4;
 	};
 
-	backlight: backlight {
+	backlight_lcd: backlight {
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_backlight>;
 		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 16 64 255>;
 		num-interpolated-steps = <16>;
-		default-brightness-level = <1>;
+		default-brightness-level = <48>;
 		power-supply = <&reg_3v3>;
 		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
 	};
 
+	backlight_led: backlight-led {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000 0>;
+		brightness-levels = <0 16 64 255>;
+		num-interpolated-steps = <16>;
+		default-brightness-level = <48>;
+		power-supply = <&reg_3v3>;
+	};
+
+	/* only for backwards compatibility with old HW */
+	backlight_isb: backlight-isb {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <0 8 48 255>;
+		num-interpolated-steps = <5>;
+		default-brightness-level = <0>;
+		power-supply = <&reg_3v3>;
+	};
+
 	connector {
 		compatible = "composite-video-connector";
 		label = "Composite0";
@@ -40,16 +59,25 @@
 		};
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
+	counter-0 {
+		compatible = "interrupt-counter";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_counter0>;
+		gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	};
+
+	counter-1 {
+		compatible = "interrupt-counter";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_counter1>;
+		gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	};
 
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
+	counter-2 {
+		compatible = "interrupt-counter";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_counter2>;
+		gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	};
 
 	leds {
@@ -58,36 +86,31 @@
 		pinctrl-0 = <&pinctrl_leds>;
 
 		led-0 {
-			label = "LED_DI0_DEBUG_0";
+			label = "debug0";
 			function = LED_FUNCTION_HEARTBEAT;
-			gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		led-1 {
-			label = "LED_DI0_DEBUG_1";
+			label = "debug1";
 			function = LED_FUNCTION_DISK;
-			gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "disk-activity";
 		};
 
 		led-2 {
-			label = "POWER_LED";
+			label = "power_led";
 			function = LED_FUNCTION_POWER;
 			gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
-	};
-
-	panel {
-		compatible = "kyo,tcg121xglp";
-		backlight = <&backlight>;
-		power-supply = <&reg_3v3>;
 
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
+		led-3 {
+			label = "isb_led";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
 	};
 
@@ -105,15 +128,6 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	reg_h1_vbus: regulator-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "h1-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
 	reg_otg_vbus: regulator-otg-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "otg-vbus";
@@ -123,18 +137,6 @@
 		enable-active-high;
 	};
 
-	reg_wifi: regulator-wifi {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_wifi_npd>;
-		regulator-name = "wifi";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		startup-delay-us = <70000>;
-	};
-
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "prti6q-sgtl5000";
@@ -161,6 +163,14 @@
 			frame-master;
 		};
 	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+		};
+	};
 };
 
 &audmux {
@@ -191,6 +201,8 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_can1>;
+	termination-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	termination-ohms = <150>;
 	status = "okay";
 };
 
@@ -218,47 +230,13 @@
 	};
 };
 
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&rgmii_phy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Microchip KSZ9031RNX PHY */
-		rgmii_phy: ethernet-phy@0 {
-			reg = <0>;
-			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
-			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <300>;
-		};
-	};
-};
-
-&gpio1 {
-	gpio-line-names =
-		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
-			"CAM2_MIRROR", "", "", "SMBALERT",
-		"DEBUG_0", "DEBUG_1", "SDIO_SCK", "SDIO_CMD", "SDIO_D3",
-			"SDIO_D2", "SDIO_D1", "SDIO_D0",
-		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
-			"SD1_DATA3", "", "",
-		"", "ETH_RESET", "WIFI_PD", "WIFI_BT_RST", "ETH_INT", "",
-			"WL_IRQ", "ETH_MDC";
-};
-
 &gpio2 {
 	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
-			"BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
-		"", "", "", "", "", "", "", "ON_SWITCH",
-		"POWER_LED", "", "ECSPI2_SS0", "", "", "", "", "";
+		"YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "",
+		"", "LED_PWM", "", "", "",
+			"", "", "",
+		"", "", "", "", "", "ISB_IN2", "ISB_nIN1", "ON_SWITCH",
+		"POWER_LED", "", "", "", "", "", "", "";
 };
 
 &gpio3 {
@@ -267,37 +245,8 @@
 		"", "", "", "", "", "", "", "",
 		"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
 			"CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
-		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
-			"CAN2_SR", "CAN2_TX", "CAN2_RX",
-		"LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "", "", "", "", "", "",
-		"", "", "", "", "BL_EN", "BL_PWM", "", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "", "", "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_W_DIS",
-		"PCIE_RESET", "", "", "", "", "", "", "",
-		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
-			"I2S_BITCLK", "I2S_DOUT",
-		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
-			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
-};
-
-&gpio6 {
-	gpio-line-names =
-		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
-			"ITU656_D6", "ITU656_D7", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
-			"RGMII_TD3",
-		"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
-			"RGMII_RD2", "RGMII_RD3", "", "";
+		"TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
+			"YACO_RESET";
 };
 
 &gpio7 {
@@ -392,9 +341,10 @@
 		reg = <0x51>;
 	};
 
-	temperature-sensor@70 {
+	tsens0: temperature-sensor@70 {
 		compatible = "ti,tmp103";
 		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
 	};
 };
 
@@ -424,13 +374,21 @@
 	};
 };
 
-&pcie {
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
-&pwm1 {
+&pwm2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
 };
 
@@ -446,12 +404,6 @@
 	status = "okay";
 };
 
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
@@ -471,7 +423,6 @@
 };
 
 &usbh1 {
-	vbus-supply = <&reg_h1_vbus>;
 	pinctrl-names = "default";
 	phy_type = "utmi";
 	dr_mode = "host";
@@ -500,26 +451,6 @@
 	status = "okay";
 };
 
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_wifi>;
-	non-removable;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	no-1-8-v;
-	no-mmc;
-	no-sd;
-	status = "okay";
-
-	wifi {
-		compatible = "ti,wl1271";
-		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = "38400000";
-		tcxo-clock-frequency = "19200000";
-	};
-};
-
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
@@ -572,6 +503,24 @@
 		>;
 	};
 
+	pinctrl_counter0: counter0grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00			0x1b000
+		>;
+	};
+
+	pinctrl_counter1: counter1grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01			0x1b000
+		>;
+	};
+
+	pinctrl_counter2: counter2grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02			0x1b000
+		>;
+	};
+
 	pinctrl_ecspi1: ecspi1grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
@@ -582,29 +531,6 @@
 		>;
 	};
 
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x10030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x10030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x10030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x10030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x10030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL		0x10030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK		0x10030
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x10030
-			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x10030
-			/* Phy reset */
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25		0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28		0x1b0b1
-		>;
-	};
-
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			/* ITU656_nRESET */
@@ -615,8 +541,6 @@
 			MX6QDL_PAD_GPIO_4__GPIO1_IO04			0x130b0
 			/* CAM_nDETECT */
 			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b0
-			/* nON_SWITCH */
-			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
 			/* ISB_IN1 */
 			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x130b0
 			/* ISB_nIN2 */
@@ -638,27 +562,11 @@
 			/* ITU656_nPDN */
 			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b0b0
 
-			/* HW revision detect */
-			/* REV_ID0 */
-			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08			0x1b0b0
-			/* REV_ID1 */
-			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09			0x1b0b0
-			/* REV_ID2 */
-			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10			0x1b0b0
-			/* REV_ID3 */
-			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11			0x1b0b0
-			/* REV_ID4 */
-			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12			0x1b0b0
-
 			/* New in HW revision 1 */
 			/* ON1_FB */
 			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x100b0
 			/* DIP1_FB */
 			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18			0x1b0b0
-
-			/* New in UT2: FIXME: ISB PWM should start off, PD */
-			/* ISB_LED_PWM */
-			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x130b0
 		>;
 	};
 
@@ -698,6 +606,8 @@
 			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17		0x1b0b0
 			/* POWER_LED */
 			MX6QDL_PAD_EIM_CS1__GPIO2_IO24			0x1b0b0
+			/* ISB_LED */
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31		0x1b0b0
 		>;
 	};
 
@@ -707,20 +617,23 @@
 		>;
 	};
 
-	/* YaCO AUX Uart */
-	pinctrl_uart1: uart1grp {
+	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT			0x1b0b0
 		>;
 	};
 
-	pinctrl_uart2: uart2grp {
+	pinctrl_pwm3: pwm3grp {
 		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__UART2_RX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D27__UART2_TX_DATA		0x1b0b1
-			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B		0x1b0b1
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT			0x1b0b0
+		>;
+	};
+
+	/* YaCO AUX Uart */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
 		>;
 	};
 
@@ -766,19 +679,6 @@
 		>;
 	};
 
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD			0x170b9
-			MX6QDL_PAD_SD2_CLK__SD2_CLK			0x100b9
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0			0x170b9
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1			0x170b9
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2			0x170b9
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3			0x170b9
-			/* WL12xx IRQ */
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30		0x10880
-		>;
-	};
-
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
@@ -794,10 +694,4 @@
 			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
 		>;
 	};
-
-	pinctrl_wifi_npd: wifinpdgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26		0x1b8b0
-		>;
-	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
index b9b698f72b26..bf86b639fdac 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
@@ -142,7 +142,6 @@
 	imx6qdl-wandboard {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__USB_OTG_PWR		0x80000000	/* USB Power Enable */
 				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000	/* USDHC1 CD */
 				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x80000000	/* uSDHC3 CD */
 				MX6QDL_PAD_EIM_D29__GPIO3_IO29   	0x1f0b1		/* RGMII PHY reset */
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index c070893c509e..e4f63423d8ee 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -97,15 +97,21 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 &i2c2 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	codec: sgtl5000@a {
@@ -125,7 +131,6 @@
 		pinctrl-0 = <&pinctrl_ov5645>;
 		reg = <0x3c>;
 		clocks = <&clks IMX6QDL_CLK_CKO2>;
-		clock-names = "xclk";
 		clock-frequency = <24000000>;
 		vdddo-supply = <&reg_1p8v>;
 		vdda-supply = <&reg_2p8v>;
@@ -185,6 +190,13 @@
 			>;
 		};
 
+		pinctrl_i2c1_gpio: i2c1gpiogrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b0
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b0
+			>;
+		};
+
 		pinctrl_i2c2: i2c2grp {
 			fsl,pins = <
 				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
@@ -192,6 +204,13 @@
 			>;
 		};
 
+		pinctrl_i2c2_gpio: i2c2gpiogrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b0
+				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b0
+			>;
+		};
+
 		pinctrl_mclk: mclkgrp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
@@ -289,6 +308,7 @@
 
 		ethphy: ethernet-phy@1 {
 			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 525ff62b47f5..5bb47c79a4da 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -277,7 +277,7 @@
 	pinctrl-0 = <&pinctrl_uart4>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 82e01ce026ea..b72ec745f6d1 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -55,19 +55,19 @@
 
 	clocks {
 		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
@@ -143,7 +143,7 @@
 		#phy-cells = <0>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -157,7 +157,6 @@
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
 			clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
@@ -264,7 +263,7 @@
 		};
 
 		pcie: pcie@1ffc000 {
-			compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
+			compatible = "fsl,imx6q-pcie";
 			reg = <0x01ffc000 0x04000>,
 			      <0x01f00000 0x80000>;
 			reg-names = "dbi", "config";
@@ -272,10 +271,9 @@
 			#size-cells = <2>;
 			device_type = "pci";
 			bus-range = <0x00 0xff>;
-			ranges = <0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
-				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0 0          0x01f80000 0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
-			num-viewport = <4>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
@@ -291,7 +289,7 @@
 			status = "disabled";
 		};
 
-		bus@2000000 { /* AIPS1 */
+		aips1: bus@2000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -334,7 +332,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
 						 <&clks IMX6QDL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -348,7 +346,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
 						 <&clks IMX6QDL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -362,7 +360,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
 						 <&clks IMX6QDL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -376,7 +374,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
 						 <&clks IMX6QDL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -482,7 +480,7 @@
 					status = "okay";
 				};
 
-				spba@203c000 {
+				spba-bus@203c000 {
 					reg = <0x0203c000 0x4000>;
 				};
 			};
@@ -763,7 +761,7 @@
 					regulator-name = "vddpu";
 					regulator-min-microvolt = <725000>;
 					regulator-max-microvolt = <1450000>;
-					regulator-enable-ramp-delay = <150>;
+					regulator-enable-ramp-delay = <380>;
 					anatop-reg-offset = <0x140>;
 					anatop-vol-bit-shift = <9>;
 					anatop-vol-bit-width = <5>;
@@ -930,7 +928,7 @@
 				interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			sdma: sdma@20ec000 {
+			sdma: dma-controller@20ec000 {
 				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -942,7 +940,7 @@
 			};
 		};
 
-		bus@2100000 { /* AIPS2 */
+		aips2: bus@2100000 { /* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -1051,9 +1049,11 @@
 				clocks = <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET_REF>,
-					 <&clks IMX6QDL_CLK_ENET_REF>;
-				clock-names = "ipg", "ahb", "ptp", "enet_out";
+					 <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+				clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
 				fsl,stop-mode = <&gpr 0x34 27>;
+				nvmem-cells = <&fec_mac_addr>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 			};
 
@@ -1187,6 +1187,10 @@
 				tempmon_temp_grade: temp-grade@20 {
 					reg = <0x20 4>;
 				};
+
+				fec_mac_addr: mac-addr@88 {
+					reg = <0x88 6>;
+				};
 			};
 
 			tzasc@21d0000 { /* TZASC1 */
diff --git a/arch/arm/boot/dts/imx6qp-mba6b.dts b/arch/arm/boot/dts/imx6qp-mba6b.dts
new file mode 100644
index 000000000000..eee2e09d6e94
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-mba6b.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2015-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6qp-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6QP on MBa6x";
+	compatible = "tq,imx6qp-mba6x-b", "tq,mba6b",
+		     "tq,imx6qp-tqma6qp-b", "fsl,imx6qp";
+};
diff --git a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
index f27d7ab42626..a18266598d39 100644
--- a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
@@ -8,6 +8,9 @@
 #include "imx6qp.dtsi"
 #include "imx6qdl-phytec-phycore-som.dtsi"
 #include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with NAND";
diff --git a/arch/arm/boot/dts/imx6qp-prtwd3.dts b/arch/arm/boot/dts/imx6qp-prtwd3.dts
index c42723989bc0..cf6571cc4682 100644
--- a/arch/arm/boot/dts/imx6qp-prtwd3.dts
+++ b/arch/arm/boot/dts/imx6qp-prtwd3.dts
@@ -123,7 +123,7 @@
 };
 
 &ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
@@ -178,6 +178,8 @@
 				label = "cpu";
 				ethernet = <&fec>;
 				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
 
 				fixed-link {
 					speed = <100>;
@@ -189,7 +191,7 @@
 };
 
 &ecspi3 {
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3>;
 	status = "okay";
@@ -208,6 +210,8 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF>;
+	assigned-clock-rates = <125000000>;
 	status = "okay";
 
 	phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
index 480e73183f6b..f69eec18d865 100644
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -50,8 +50,12 @@
 	};
 };
 
+&vgen3_reg {
+	regulator-always-on;
+};
+
 &pcie {
-	status = "disabled";
+	status = "okay";
 };
 
 &sata {
diff --git a/arch/arm/boot/dts/imx6qp-vicutp.dts b/arch/arm/boot/dts/imx6qp-vicutp.dts
index 7bad7ca6b12e..49ff145fffe5 100644
--- a/arch/arm/boot/dts/imx6qp-vicutp.dts
+++ b/arch/arm/boot/dts/imx6qp-vicutp.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include "imx6qp.dtsi"
 #include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
 
 / {
 	model = "Kverneland UT1P Board";
diff --git a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
new file mode 100644
index 000000000000..afaf4a6759d4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Crux+ i.MX6QuadPlus board";
+	compatible = "ysoft,imx6qp-yapp4-crux-plus", "fsl,imx6qp";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts b/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts
new file mode 100644
index 000000000000..4a961a33bf2d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Pegasus+ i.MX6QuadPlus board";
+	compatible = "ysoft,imx6qp-yapp4-pegasus-plus", "fsl,imx6qp";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
index b310f13a53f2..fc164991d2ae 100644
--- a/arch/arm/boot/dts/imx6qp.dtsi
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -9,12 +9,18 @@
 		ocram2: sram@940000 {
 			compatible = "mmio-sram";
 			reg = <0x00940000 0x20000>;
+			ranges = <0 0x00940000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
 		ocram3: sram@960000 {
 			compatible = "mmio-sram";
 			reg = <0x00960000 0x20000>;
+			ranges = <0 0x00960000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
@@ -110,5 +116,5 @@
 };
 
 &pcie {
-	compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
+	compatible = "fsl,imx6qp-pcie";
 };
diff --git a/arch/arm/boot/dts/imx6s-dhcom-drc02.dts b/arch/arm/boot/dts/imx6s-dhcom-drc02.dts
new file mode 100644
index 000000000000..4077b607c29e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6s-dhcom-drc02.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6S-C0800-R102-F0409-E-CAN2-RTC-I-01D2
+ * DHCOM PCB number: 493-400 or newer
+ * DRC02 PCB number: 568-100 or newer
+ */
+/dts-v1/;
+
+/*
+ * The kernel only distinguishes between i.MX6 Quad and DualLite,
+ * but the Solo is actually a DualLite with only one CPU. So use
+ * DualLite for the Solo and disable one CPU node.
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-drc02.dtsi"
+
+/ {
+	model = "DH electronics i.MX6S DHCOM on DRC02";
+	compatible = "dh,imx6s-dhcom-drc02", "dh,imx6s-dhcom-som",
+		     "fsl,imx6dl";
+
+	cpus {
+		/delete-node/ cpu@1;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 25f6f2fb1555..dc5d596c18db 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -33,7 +33,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user {
+		led-user {
 			label = "debug";
 			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -137,7 +137,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "st,m25p32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6sl-kobo-aura2.dts b/arch/arm/boot/dts/imx6sl-kobo-aura2.dts
new file mode 100644
index 000000000000..657d0f1b6115
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-kobo-aura2.dts
@@ -0,0 +1,555 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for the Kobo Aura 2 ebook reader
+ *
+ * Name on mainboard is: 37NB-E60QL0+4B1
+ * Serials start with: E60QL2
+ *
+ * Copyright 2022 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Kobo Aura 2";
+	compatible = "kobo,aura2", "fsl,imx6sl";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-cover {
+			label = "Cover";
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-0 {
+			label = "koboaura2:white:on";
+			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_WHITE>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_power>;
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reset>;
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+	status = "okay";
+
+	lm3630a: backlight@36 {
+		compatible = "ti,lm3630a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+		reg = <0x36>;
+		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0>;
+			label = "backlight";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* eKTF2232 at 0x15 */
+	/* FP9928 at 0x48 */
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ricoh619: pmic@32 {
+		compatible = "ricoh,rc5t619";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ricoh_gpio>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		system-power-controller;
+
+		regulators {
+			dcdc1_reg: DCDC1 {
+				regulator-name = "DCDC1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <900000>;
+					regulator-suspend-min-microvolt = <900000>;
+				};
+			};
+
+			/* Core3_3V3 */
+			dcdc2_reg: DCDC2 {
+				regulator-name = "DCDC2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3100000>;
+					regulator-suspend-min-microvolt = <3100000>;
+				};
+			};
+
+			dcdc3_reg: DCDC3 {
+				regulator-name = "DCDC3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V2 */
+			dcdc4_reg: DCDC4 {
+				regulator-name = "DCDC4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V8 */
+			dcdc5_reg: DCDC5 {
+				regulator-name = "DCDC5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1700000>;
+					regulator-suspend-min-microvolt = <1700000>;
+				};
+			};
+
+			/* IR_3V3 */
+			ldo1_reg: LDO1  {
+				regulator-name = "LDO1";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* Core1_3V3 */
+			ldo2_reg: LDO2  {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3000000>;
+					regulator-suspend-min-microvolt = <3000000>;
+				};
+			};
+
+			/* Core5_1V2 */
+			ldo3_reg: LDO3  {
+				regulator-name = "LDO3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-boot-on;
+			};
+
+			/* SPD_3V3 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* DDR_0V6 */
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* VDD_PWM */
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* ldo_1v8 */
+			ldo8_reg: LDO8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "LDO9";
+				regulator-boot-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "LDO10";
+				regulator-boot-on;
+			};
+
+			ldortc1_reg: LDORTC1  {
+				regulator-name = "LDORTC1";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_arm {
+	vin-supply = <&dcdc3_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&snvs_rtc {
+	/*
+	 * We are using the RTC in the PMIC, but this one is not disabled
+	 * in imx6sl.dtsi.
+	 */
+	status = "disabled";
+};
+
+&uart1 {
+	/* J4, through-holes */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	/* TP198, next to J4, SMD pads */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+	non-removable;
+	status = "okay";
+
+	/* internal uSD card */
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * RTL8189F SDIO WiFi
+	 */
+};
+
+&usbotg1 {
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x17059
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12  0x17059
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CLK__GPIO5_IO15	0x1b8b1 /* ricoh619 chg */
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11	0x1b8b1 /* ricoh619 irq */
+			MX6SL_PAD_KEY_COL2__GPIO3_IO28	0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
+			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
index 6ea5f918d059..815119c12bd4 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -18,6 +18,21 @@
 	model = "Tolino Shine 2 HD";
 	compatible = "kobo,tolino-shine2hd", "fsl,imx6sl";
 
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ec 0 50000>;
+		power-supply = <&backlight_regulator>;
+	};
+
+	backlight_regulator: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_power>;
+		regulator-name = "backlight";
+		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	chosen {
 		stdout-path = &uart1;
 	};
@@ -27,7 +42,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		cover {
+		key-cover {
 			label = "Cover";
 			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
 			linux,code = <SW_LID>;
@@ -35,19 +50,19 @@
 			wakeup-source;
 		};
 
-		fl {
+		key-fl {
 			label = "Frontlight";
 			gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BRIGHTNESS_CYCLE>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -60,11 +75,17 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		on {
+		led-0 {
 			label = "tolinoshine2hd:white:on";
 			gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "timer";
 		};
+
+		led-1 {
+			label = "tolinoshine2hd:white:backlightboost";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "off";
+		};
 	};
 
 	memory@80000000 {
@@ -97,8 +118,11 @@
 	pinctrl-1 = <&pinctrl_i2c1_sleep>;
 	status = "okay";
 
-	/* TODO: embedded controller at 0x43 (driver missing) */
-
+	ec: embedded-controller@43 {
+		compatible = "netronix,ntxec";
+		reg = <0x43>;
+		#pwm-cells = <2>;
+	};
 };
 
 &i2c2 {
@@ -296,6 +320,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_backlight_power: backlight-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x17059
@@ -380,7 +410,8 @@
 
 	pinctrl_led: ledgrp {
 		fsl,pins = <
-			MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x17059
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13    0x17059
+			MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29  0x17059
 		>;
 	};
 
@@ -594,6 +625,7 @@
 
 &usbotg1 {
 	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	srp-disable;
 	hnp-disable;
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
index e3f1e8d79528..db5d8509935f 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
@@ -52,6 +52,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT3__GPIO5_IO06                0x17059 /* TP_INT */
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13                0x10059 /* TP_RST */
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SL_PAD_SD1_DAT1__GPIO5_IO08	0x17059	/* PWR_SW */
diff --git a/arch/arm/boot/dts/imx6sl-tolino-vision.dts b/arch/arm/boot/dts/imx6sl-tolino-vision.dts
new file mode 100644
index 000000000000..2694fe18a91b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-tolino-vision.dts
@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for the Tolino Vison ebook reader
+ *
+ * Name on mainboard is: 37NB-E60Q30+4A3
+ * Serials start with: 6032
+ *
+ * Copyright 2023 Andreas Kemnade
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Tolino Vision";
+	compatible = "kobo,tolino-vision", "fsl,imx6sl";
+
+	aliases {
+		mmc0 = &usdhc4;
+		mmc1 = &usdhc2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ec 0 50000>;
+		power-supply = <&backlight_regulator>;
+	};
+
+	backlight_regulator: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_power>;
+		regulator-name = "backlight";
+		gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-cover {
+			/* magnetic sensor in the corner next to the uSD slot */
+			label = "Cover";
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		key-fl {
+			label = "Frontlight";
+			gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BRIGHTNESS_CYCLE>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			/* LED on home button */
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* LED on power button */
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_power>;
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	};
+
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reset>;
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+	status = "okay";
+
+	touchscreen@15 {
+		compatible = "elan,ektf2132";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		power-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+		interrupts-extended = <&gpio5 6 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	accelerometer@1d {
+		compatible = "fsl,mma8652";
+		reg = <0x1d>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	ec: embedded-controller@43 {
+		compatible = "netronix,ntxec";
+		reg = <0x43>;
+		#pwm-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ec>;
+		interrupts-extended = <&gpio5 11 IRQ_TYPE_EDGE_FALLING>;
+		system-power-controller;
+	};
+};
+
+&snvs_rtc {
+	/*
+	 * We are using the RTC in the PMIC, but this one is not disabled
+	 * in imx6sl.dtsi.
+	 */
+	status = "disabled";
+};
+
+&uart1 {
+	/* J4 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	/* J9 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>;
+	cd-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	/* removable uSD card */
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+
+	/* CyberTan WC121 (BCM43362) SDIO WiFi */
+};
+
+&usdhc4 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc4_sleep>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+
+	/* internal eMMC */
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight_power: backlight-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059
+		>;
+	};
+
+	pinctrl_ec: ecgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT0__GPIO5_IO11  0x17000
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT1__GPIO5_IO08  0x110B0
+			MX6SL_PAD_SD1_DAT4__GPIO5_IO12  0x110B0
+			MX6SL_PAD_KEY_COL1__GPIO3_IO26  0x11030
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT6__GPIO5_IO07    0x17059
+			MX6SL_PAD_SD1_DAT7__GPIO5_IO10    0x17059
+			MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29  0x17059
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_DAT2__GPIO5_IO13	0x110B0
+			MX6SL_PAD_SD1_DAT3__GPIO5_IO06	0x1B0B1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1
+			MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x13059
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6SL_PAD_SD2_DAT4__GPIO5_IO02		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130b9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6SL_PAD_SD2_CLK__SD2_CLK		0x130f9
+			MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_CMD__GPIO5_IO04		0x100f9
+			MX6SL_PAD_SD2_CLK__GPIO5_IO05		0x100f9
+			MX6SL_PAD_SD2_DAT0__GPIO5_IO01		0x100f9
+			MX6SL_PAD_SD2_DAT1__GPIO4_IO30		0x100f9
+			MX6SL_PAD_SD2_DAT2__GPIO5_IO03		0x100f9
+			MX6SL_PAD_SD2_DAT3__GPIO4_IO28		0x100f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x17059
+			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x13059
+			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x17059
+			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x17059
+			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x17059
+			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x17059
+			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x17059
+			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x17059
+			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x17059
+			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x17059
+			MX6SL_PAD_FEC_REF_CLK__SD4_RESET	0x17068
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x170b9
+			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x130b9
+			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x170b9
+			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x170b9
+			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x170b9
+			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x170b9
+			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x170b9
+			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x170b9
+			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x170b9
+			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__SD4_CMD		0x170f9
+			MX6SL_PAD_FEC_MDIO__SD4_CLK		0x130f9
+			MX6SL_PAD_FEC_RX_ER__SD4_DATA0		0x170f9
+			MX6SL_PAD_FEC_CRS_DV__SD4_DATA1		0x170f9
+			MX6SL_PAD_FEC_RXD1__SD4_DATA2		0x170f9
+			MX6SL_PAD_FEC_TXD0__SD4_DATA3		0x170f9
+			MX6SL_PAD_FEC_MDC__SD4_DATA4		0x170f9
+			MX6SL_PAD_FEC_RXD0__SD4_DATA5		0x170f9
+			MX6SL_PAD_FEC_TX_EN__SD4_DATA6		0x170f9
+			MX6SL_PAD_FEC_TXD1__SD4_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc4_sleep: usdhc4-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21	0x100c1
+			MX6SL_PAD_FEC_MDIO__GPIO4_IO20		0x100c1
+			MX6SL_PAD_FEC_RX_ER__GPIO4_IO19		0x100c1
+			MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25	0x100c1
+			MX6SL_PAD_FEC_RXD1__GPIO4_IO18		0x100c1
+			MX6SL_PAD_FEC_TXD0__GPIO4_IO24		0x100c1
+			MX6SL_PAD_FEC_MDC__GPIO4_IO23		0x100c1
+			MX6SL_PAD_FEC_RXD0__GPIO4_IO17		0x100c1
+			MX6SL_PAD_FEC_TX_EN__GPIO4_IO22		0x100c1
+			MX6SL_PAD_FEC_TXD1__GPIO4_IO16		0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	/* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sl-tolino-vision5.dts b/arch/arm/boot/dts/imx6sl-tolino-vision5.dts
new file mode 100644
index 000000000000..6bc342035e2b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sl-tolino-vision5.dts
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Tolino Vision 5 ebook reader
+ *
+ * Name on mainboard is: 37NB-E70K0M+6A3
+ * Serials start with: E70K02 (a number also seen in
+ * vendor kernel sources)
+ *
+ * This mainboard seems to be equipped with different SoCs.
+ * In the Tolino Vision 5 ebook reader it is a i.MX6SL
+ *
+ * Copyright 2021 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+#include "e70k02.dtsi"
+
+/ {
+	model = "Tolino Vision 5";
+	compatible = "kobo,tolino-vision5", "fsl,imx6sl";
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_keys>;
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_TXD0__GPIO4_IO24          0x17059 /* TP_INT */
+			MX6SL_PAD_FEC_RXD1__GPIO4_IO18          0x10059 /* TP_RST */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25	0x17059	/* PWR_SW */
+			MX6SL_PAD_FEC_MDC__GPIO4_IO23	0x17059	/* HALL_EN */
+			MX6SL_PAD_KEY_COL4__GPIO4_IO00		0x17059	/* PAGE_UP */
+			MX6SL_PAD_KEY_COL5__GPIO4_IO02		0x17059	/* PAGE_DOWN */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SL_PAD_LCD_DAT1__GPIO2_IO21	0x79
+			MX6SL_PAD_LCD_DAT4__GPIO2_IO24	0x79
+			MX6SL_PAD_LCD_DAT5__GPIO2_IO25	0x79
+			MX6SL_PAD_LCD_DAT6__GPIO2_IO26	0x79
+			MX6SL_PAD_LCD_DAT7__GPIO2_IO27	0x79
+			MX6SL_PAD_LCD_DAT8__GPIO2_IO28	0x79
+			MX6SL_PAD_LCD_DAT9__GPIO2_IO29	0x79
+			MX6SL_PAD_LCD_DAT10__GPIO2_IO30	0x79
+			MX6SL_PAD_LCD_DAT11__GPIO2_IO31	0x79
+			MX6SL_PAD_LCD_DAT12__GPIO3_IO00	0x79
+			MX6SL_PAD_LCD_DAT13__GPIO3_IO01	0x79
+			MX6SL_PAD_LCD_DAT14__GPIO3_IO02	0x79
+			MX6SL_PAD_LCD_DAT15__GPIO3_IO03	0x79
+			MX6SL_PAD_LCD_DAT16__GPIO3_IO04	0x79
+			MX6SL_PAD_LCD_DAT17__GPIO3_IO05	0x79
+			MX6SL_PAD_LCD_DAT18__GPIO3_IO06	0x79
+			MX6SL_PAD_LCD_DAT19__GPIO3_IO07	0x79
+			MX6SL_PAD_LCD_DAT20__GPIO3_IO08	0x79
+			MX6SL_PAD_LCD_DAT21__GPIO3_IO09	0x79
+			MX6SL_PAD_LCD_DAT22__GPIO3_IO10	0x79
+			MX6SL_PAD_LCD_DAT23__GPIO3_IO11	0x79
+			MX6SL_PAD_LCD_CLK__GPIO2_IO15		0x79
+			MX6SL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
+			MX6SL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
+			MX6SL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
+			MX6SL_PAD_LCD_RESET__GPIO2_IO19	0x79
+			MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21	0x79
+			MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26	0x79
+			MX6SL_PAD_KEY_COL3__GPIO3_IO30		0x79
+			MX6SL_PAD_KEY_ROW7__GPIO4_IO07		0x79
+			MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C1_SCL__I2C1_SCL	 0x400108b1
+			MX6SL_PAD_I2C1_SDA__I2C1_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x4001f8b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2grp-sleep {
+		fsl,pins = <
+			MX6SL_PAD_I2C2_SCL__I2C2_SCL	 0x400108b1
+			MX6SL_PAD_I2C2_SDA__I2C2_SDA	 0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SL_PAD_REF_CLK_24M__I2C3_SCL  0x4001f8b1
+			MX6SL_PAD_REF_CLK_32K__I2C3_SDA  0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_RXD0__GPIO4_IO17	0x10059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10		0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh-gpiogrp {
+		fsl,pins = <
+			MX6SL_PAD_FEC_MDIO__GPIO4_IO20		0x1b8b1 /* ricoh619 chg */
+			MX6SL_PAD_FEC_RX_ER__GPIO4_IO19		0x1b8b1 /* ricoh619 irq */
+			MX6SL_PAD_KEY_COL2__GPIO3_IO28		0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
+			MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6SL_PAD_SD1_CLK__SD1_CLK	0x17059
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x17059
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x17059
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x17059
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x17059
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x17059
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x17059
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x17059
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD	0x170b9
+			MX6SL_PAD_SD1_CLK__SD1_CLK	0x170b9
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x170b9
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x170b9
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x170b9
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x170b9
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x170b9
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x170b9
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x170b9
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD	0x170f9
+			MX6SL_PAD_SD1_CLK__SD1_CLK	0x170f9
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x170f9
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x170f9
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x170f9
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x170f9
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x170b9
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x170b9
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x170b9
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_sleep: usdhc1-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD1_CMD__SD1_CMD	0x10059
+			MX6SL_PAD_SD1_CLK__SD1_CLK	0x10059
+			MX6SL_PAD_SD1_DAT0__SD1_DATA0	0x10059
+			MX6SL_PAD_SD1_DAT1__SD1_DATA1	0x10059
+			MX6SL_PAD_SD1_DAT2__SD1_DATA2	0x10059
+			MX6SL_PAD_SD1_DAT3__SD1_DATA3	0x10059
+			MX6SL_PAD_SD1_DAT4__SD1_DATA4	0x10059
+			MX6SL_PAD_SD1_DAT5__SD1_DATA5	0x10059
+			MX6SL_PAD_SD1_DAT6__SD1_DATA6	0x10059
+			MX6SL_PAD_SD1_DAT7__SD1_DATA7	0x10059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x11059
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x11059
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x11059
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
+			MX6SL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
+			MX6SL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
+			MX6SL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SL_PAD_SD3_DAT0__GPIO5_IO19	0x100c1
+			MX6SL_PAD_SD3_DAT1__GPIO5_IO20	0x100c1
+			MX6SL_PAD_SD3_DAT2__GPIO5_IO16	0x100c1
+			MX6SL_PAD_SD3_DAT3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT6__GPIO4_IO29	0x10059	 /* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SL_PAD_SD2_DAT7__GPIO5_IO00	0x10059	/* WIFI_RST */
+		>;
+	};
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led>;
+};
+
+&lm3630a {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+};
+
+&reg_wifi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_power>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&dcdc2_reg>;
+};
+
+&reg_arm {
+	vin-supply = <&dcdc3_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&dcdc1_reg>;
+};
+
+&ricoh619 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ricoh_gpio>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+};
+
+&wifi_pwrseq {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 997b96c1c47b..28111efb19a6 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -50,23 +50,21 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0x0>;
 			next-level-cache = <&L2>;
-			operating-points = <
+			operating-points =
 				/* kHz    uV */
-				996000  1275000
-				792000  1175000
-				396000  975000
-			>;
-			fsl,soc-operating-points = <
-				/* ARM kHz      SOC-PU uV */
-				996000          1225000
-				792000          1175000
-				396000          1175000
-			>;
+				<996000  1275000>,
+				<792000  1175000>,
+				<396000  975000>;
+			fsl,soc-operating-points =
+				/* ARM kHz	SOC-PU uV */
+				<996000		1225000>,
+				<792000		1175000>,
+				<396000		1175000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
 			clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
@@ -117,6 +115,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SL_CLK_OCRAM>;
 		};
 
@@ -224,7 +225,7 @@
 
 				uart5: serial@2018000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02018000 0x4000>;
 					interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -237,7 +238,7 @@
 
 				uart1: serial@2020000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02020000 0x4000>;
 					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -250,7 +251,7 @@
 
 				uart2: serial@2024000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -311,7 +312,7 @@
 
 				uart3: serial@2034000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02034000 0x4000>;
 					interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -324,7 +325,7 @@
 
 				uart4: serial@2038000 {
 					compatible = "fsl,imx6sl-uart",
-						   "fsl,imx6q-uart", "fsl,imx21-uart";
+						     "fsl,imx6q-uart", "fsl,imx21-uart";
 					reg = <0x02038000 0x4000>;
 					interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SL_CLK_UART>,
@@ -713,7 +714,7 @@
 						#power-domain-cells = <0>;
 						power-supply = <&reg_pu>;
 						clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
-						         <&clks IMX6SL_CLK_GPU2D_PODF>;
+							 <&clks IMX6SL_CLK_GPU2D_PODF>;
 					};
 
 					pd_disp: power-domain@2 {
@@ -749,7 +750,7 @@
 				interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			sdma: sdma@20ec000 {
+			sdma: dma-controller@20ec000 {
 				compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index 32b3d82fec53..269092ac881c 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -37,7 +37,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user {
+		led-user {
 			label = "debug";
 			gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
index 90b32f5eb529..c7cfe0b70f04 100644
--- a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
+++ b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts
@@ -62,6 +62,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_DATA3__GPIO5_IO06                0x17059 /* TP_INT */
+			MX6SLL_PAD_SD1_DATA2__GPIO5_IO13                0x10059 /* TP_RST */
+		>;
+	};
+
 	pinctrl_gpio_keys: gpio-keysgrp {
 		fsl,pins = <
 			MX6SLL_PAD_SD1_DATA1__GPIO5_IO08	0x17059	/* PWR_SW */
diff --git a/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts b/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts
new file mode 100644
index 000000000000..7e4f38dd11e2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sll-kobo-librah2o.dts
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Device tree for the Kobo Libra H2O ebook reader
+ *
+ * Name on mainboard is: 37NB-E70K0M+6A3
+ * Serials start with: E70K02 (a number also seen in
+ * vendor kernel sources)
+ *
+ * This mainboard seems to be equipped with different SoCs.
+ * In the Kobo Libra H2O ebook reader it is an i.MX6SLL
+ *
+ * Copyright 2021 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sll.dtsi"
+#include "e70k02.dtsi"
+
+/ {
+	model = "Kobo Libra H2O";
+	compatible = "kobo,librah2o", "fsl,imx6sll";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <393216000>;
+};
+
+&cpu0 {
+	arm-supply = <&dcdc3_reg>;
+	soc-supply = <&dcdc1_reg>;
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_keys>;
+};
+
+&i2c1 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_sleep>;
+};
+
+&i2c2 {
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_sleep>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_cyttsp5_gpio: cyttsp5-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24	0x17059 /* TP_INT */
+			MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18	0x10059 /* TP_RST */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25	0x17059	/* PWR_SW */
+			MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23	0x17059	/* HALL_EN */
+			MX6SLL_PAD_KEY_COL4__GPIO4_IO00		0x17059	/* PAGE_UP */
+			MX6SLL_PAD_KEY_COL5__GPIO4_IO02		0x17059	/* PAGE_DOWN */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6SLL_PAD_LCD_DATA01__GPIO2_IO21	0x79
+			MX6SLL_PAD_LCD_DATA04__GPIO2_IO24	0x79
+			MX6SLL_PAD_LCD_DATA05__GPIO2_IO25	0x79
+			MX6SLL_PAD_LCD_DATA06__GPIO2_IO26	0x79
+			MX6SLL_PAD_LCD_DATA07__GPIO2_IO27	0x79
+			MX6SLL_PAD_LCD_DATA08__GPIO2_IO28	0x79
+			MX6SLL_PAD_LCD_DATA09__GPIO2_IO29	0x79
+			MX6SLL_PAD_LCD_DATA10__GPIO2_IO30	0x79
+			MX6SLL_PAD_LCD_DATA11__GPIO2_IO31	0x79
+			MX6SLL_PAD_LCD_DATA12__GPIO3_IO00	0x79
+			MX6SLL_PAD_LCD_DATA13__GPIO3_IO01	0x79
+			MX6SLL_PAD_LCD_DATA14__GPIO3_IO02	0x79
+			MX6SLL_PAD_LCD_DATA15__GPIO3_IO03	0x79
+			MX6SLL_PAD_LCD_DATA16__GPIO3_IO04	0x79
+			MX6SLL_PAD_LCD_DATA17__GPIO3_IO05	0x79
+			MX6SLL_PAD_LCD_DATA18__GPIO3_IO06	0x79
+			MX6SLL_PAD_LCD_DATA19__GPIO3_IO07	0x79
+			MX6SLL_PAD_LCD_DATA20__GPIO3_IO08	0x79
+			MX6SLL_PAD_LCD_DATA21__GPIO3_IO09	0x79
+			MX6SLL_PAD_LCD_DATA22__GPIO3_IO10	0x79
+			MX6SLL_PAD_LCD_DATA23__GPIO3_IO11	0x79
+			MX6SLL_PAD_LCD_CLK__GPIO2_IO15		0x79
+			MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16	0x79
+			MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17	0x79
+			MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18	0x79
+			MX6SLL_PAD_LCD_RESET__GPIO2_IO19	0x79
+			MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21	0x79
+			MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26	0x79
+			MX6SLL_PAD_KEY_COL3__GPIO3_IO30		0x79
+			MX6SLL_PAD_KEY_ROW7__GPIO4_IO07		0x79
+			MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13	0x79
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL   0x4001f8b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA   0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c1_sleep: i2c1grp-sleep {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL   0x400108b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA   0x400108b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C2_SCL__I2C2_SCL   0x4001f8b1
+			MX6SLL_PAD_I2C2_SDA__I2C2_SDA   0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2_sleep: i2c2grp-sleep {
+		fsl,pins = <
+			MX6SLL_PAD_I2C2_SCL__I2C2_SCL   0x400108b1
+			MX6SLL_PAD_I2C2_SDA__I2C2_SDA   0x400108b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
+			MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17	0x10059
+		>;
+	};
+
+	pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10   0x10059 /* HWEN */
+		>;
+	};
+
+	pinctrl_ricoh_gpio: ricoh-gpiogrp {
+		fsl,pins = <
+			MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20	0x1b8b1 /* ricoh619 chg */
+			MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19	0x1b8b1 /* ricoh619 irq */
+			MX6SLL_PAD_KEY_COL2__GPIO3_IO28		0x1b8b1 /* ricoh619 bat_low_int */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x17059
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x17059
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x17059
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x17059
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x17059
+			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x17059
+			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x17059
+			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x17059
+			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x170b9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170b9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170b9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170b9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170b9
+			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x170b9
+			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x170b9
+			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x170b9
+			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x170f9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170f9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170f9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170f9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170f9
+			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x170b9
+			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x170b9
+			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x170b9
+			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_sleep: usdhc1-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x10059
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x10059
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x10059
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x10059
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x10059
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x10059
+			MX6SLL_PAD_SD1_DATA4__SD1_DATA4	0x10059
+			MX6SLL_PAD_SD1_DATA5__SD1_DATA5	0x10059
+			MX6SLL_PAD_SD1_DATA6__SD1_DATA6	0x10059
+			MX6SLL_PAD_SD1_DATA7__SD1_DATA7	0x10059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x11059
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x11059
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x11059
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x11059
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x11059
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x11059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170b9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170b9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170b9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170b9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170b9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170f9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK	0x170f9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170f9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170f9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170f9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__GPIO5_IO21	0x100c1
+			MX6SLL_PAD_SD3_CLK__GPIO5_IO18	0x100c1
+			MX6SLL_PAD_SD3_DATA0__GPIO5_IO19	0x100c1
+			MX6SLL_PAD_SD3_DATA1__GPIO5_IO20	0x100c1
+			MX6SLL_PAD_SD3_DATA2__GPIO5_IO16	0x100c1
+			MX6SLL_PAD_SD3_DATA3__GPIO5_IO17	0x100c1
+		>;
+	};
+
+	pinctrl_wifi_power: wifi-powergrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_DATA6__GPIO4_IO29	0x10059	 /* WIFI_3V3_ON */
+		>;
+	};
+
+	pinctrl_wifi_reset: wifi-resetgrp {
+		fsl,pins = <
+			MX6SLL_PAD_SD2_DATA7__GPIO5_IO00	0x10059	 /* WIFI_RST */
+		>;
+	};
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led>;
+};
+
+&lm3630a {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
+};
+
+&reg_wifi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_power>;
+};
+
+&ricoh619 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ricoh_gpio>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep>;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>;
+};
+
+&wifi_pwrseq {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+};
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 04f8d637a501..2873369a57c0 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -51,20 +51,18 @@
 			device_type = "cpu";
 			reg = <0>;
 			next-level-cache = <&L2>;
-			operating-points = <
+			operating-points =
 				/* kHz    uV */
-				996000  1275000
-				792000  1175000
-				396000  1075000
-				198000	975000
-			>;
-			fsl,soc-operating-points = <
+				<996000  1275000>,
+				<792000  1175000>,
+				<396000  1075000>,
+				<198000	  975000>;
+			fsl,soc-operating-points =
 				/* ARM kHz      SOC-PU uV */
-				996000          1175000
-				792000          1175000
-				396000          1175000
-				198000		1175000
-			>;
+				<996000         1175000>,
+				<792000         1175000>,
+				<396000         1175000>,
+				<198000		1175000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
 			clocks = <&clks IMX6SLL_CLK_ARM>,
@@ -117,6 +115,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		intc: interrupt-controller@a01000 {
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index 66af78e83b70..a2c79bcf9a11 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -107,7 +107,7 @@
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "microchip,sst25vf016b";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 83ee97252ff1..b0c27b9b0244 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -20,7 +20,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user {
+		led-user {
 			label = "debug";
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index dce5dcf96c25..7dda42553f4b 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -123,7 +123,7 @@
 	pinctrl-0 = <&pinctrl_qspi2>;
 	status = "okay";
 
-	flash0: s25fl128s@0 {
+	flash0: flash@0 {
 		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -133,7 +133,7 @@
 		spi-tx-bus-width = <4>;
 	};
 
-	flash1: s25fl128s@2 {
+	flash1: flash@2 {
 		reg = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 5a63ca615722..969cfe920d25 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -108,23 +108,23 @@
 	pinctrl-0 = <&pinctrl_qspi2>;
 	status = "okay";
 
-	flash0: n25q256a@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <0>;
 	};
 
-	flash1: n25q256a@2 {
+	flash1: flash@2 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <2>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
index ee645655090d..725d0b5cb55f 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -15,14 +15,14 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-red {
 			label = "udoo-neo:red:mmc";
 			gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 			linux,default-trigger = "mmc0";
 		};
 
-		orange {
+		led-orange {
 			label = "udoo-neo:orange:user";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
@@ -183,6 +183,27 @@
 	status = "okay";
 };
 
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	hdmi-transmitter@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+		interrupts-extended = <&gpio3 27 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			port {
+				hdmi: endpoint {
+					remote-endpoint = <&lcdc>;
+				};
+			};
+		};
+	};
+};
+
 &i2c4 { /* Onboard Motion sensors */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c4>;
@@ -190,10 +211,22 @@
 	status = "disabled";
 };
 
+&lcdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		lcdc: endpoint {
+			remote-endpoint = <&hdmi>;
+		};
+	};
+};
+
 &iomuxc {
 	pinctrl_bt_reg: btreggrp {
 		fsl,pins =
-			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17        0x15059>;
+			<MX6SX_PAD_KEY_ROW2__GPIO2_IO_17	0x15059>;
 	};
 
 	pinctrl_enet1: enet1grp {
@@ -227,12 +260,52 @@
 			<MX6SX_PAD_GPIO1_IO02__I2C2_SCL		0x4001b8b1>;
 	};
 
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins =
+			<MX6SX_PAD_KEY_ROW4__I2C3_SDA			0x4001b8b1>,
+			<MX6SX_PAD_KEY_COL4__I2C3_SCL			0x4001b8b1>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins =
 			<MX6SX_PAD_USB_H_DATA__I2C4_SDA		0x4001b8b1>,
 			<MX6SX_PAD_USB_H_STROBE__I2C4_SCL	0x4001b8b1>;
 	};
 
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23		0x4001b0b0
+			MX6SX_PAD_LCD1_CLK__LCDIF1_CLK		0x4001b0b0
+			MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE		0x4001b0b0
+			MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC		0x4001b0b0
+			MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC		0x4001b0b0
+			MX6SX_PAD_LCD1_RESET__GPIO3_IO_27		0x4001b0b0
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins =
 			<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1>,
@@ -273,24 +346,23 @@
 
 	pinctrl_otg1_reg: otg1grp {
 		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9        0x10b0>;
+			<MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9	0x10b0>;
 	};
 
-
 	pinctrl_otg2_reg: otg2grp {
 		fsl,pins =
-			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12        0x10b0>;
+			<MX6SX_PAD_NAND_RE_B__GPIO4_IO_12	0x10b0>;
 	};
 
 	pinctrl_usb_otg1: usbotg1grp {
 		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID    0x17059>,
-			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC       0x10b0>;
+			<MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID	0x17059>,
+			<MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC	0x10b0>;
 	};
 
 	pinctrl_usb_otg2: usbot2ggrp {
 		fsl,pins =
-			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC     0x10b0>;
+			<MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC	0x10b0>;
 	};
 
 	pinctrl_usdhc2: usdhc2grp {
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 8516730778df..93ac2380ca1e 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -154,7 +154,7 @@
 		#phy-cells = <0>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -164,12 +164,18 @@
 		ocram_s: sram@8f8000 {
 			compatible = "mmio-sram";
 			reg = <0x008f8000 0x4000>;
+			ranges = <0 0x008f8000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
 		};
 
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6SX_CLK_OCRAM>;
 		};
 
@@ -210,7 +216,6 @@
 				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
 			clocks = <&clks IMX6SX_CLK_APBH_DMA>;
@@ -842,7 +847,7 @@
 				reg = <0x020e4000 0x4000>;
 			};
 
-			sdma: sdma@20ec000 {
+			sdma: dma-controller@20ec000 {
 				compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -1385,7 +1390,7 @@
 
 			pwm8: pwm@22b0000 {
 				compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
-				reg = <0x0022b0000 0x4000>;
+				reg = <0x022b0000 0x4000>;
 				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_PWM8>,
 					 <&clks IMX6SX_CLK_PWM8>;
@@ -1395,15 +1400,15 @@
 		};
 
 		pcie: pcie@8ffc000 {
-			compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
+			compatible = "fsl,imx6sx-pcie";
 			reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>;
 			reg-names = "dbi", "config";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
 			bus-range = <0x00 0xff>;
-			ranges = <0x81000000 0 0          0x08f80000 0 0x00010000 /* downstream I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0 0          0x08f80000 0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index c593597b2119..7275a1366413 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -2,6 +2,8 @@
 //
 // Copyright (C) 2015 Freescale Semiconductor, Inc.
 
+#include <dt-bindings/media/video-interfaces.h>
+
 / {
 	chosen {
 		stdout-path = &uart1;
@@ -60,41 +62,29 @@
 		gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
 	};
 
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "mx6ul-wm8960";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Line", "Line In",
-			"Line", "Line Out",
-			"Speaker", "Speaker",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
+	sound-wm8960 {
+		compatible = "fsl,imx-audio-wm8960";
+		model = "wm8960-audio";
+		audio-cpu = <&sai2>;
+		audio-codec = <&codec>;
+		audio-asrc = <&asrc>;
+		hp-det-gpio = <&gpio5 4 0>;
+		audio-routing =
 			"Headphone Jack", "HP_L",
 			"Headphone Jack", "HP_R",
-			"Speaker", "SPK_LP",
-			"Speaker", "SPK_LN",
-			"Speaker", "SPK_RP",
-			"Speaker", "SPK_RN",
-			"LINPUT1", "Mic Jack",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
+			"LINPUT2", "Mic Jack",
 			"LINPUT3", "Mic Jack",
-			"RINPUT1", "Mic Jack",
-			"RINPUT2", "Mic Jack";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&codec>;
-			clocks = <&clks IMX6UL_CLK_SAI2>;
-		};
+			"RINPUT1", "AMIC",
+			"RINPUT2", "AMIC",
+			"Mic Jack", "MICB",
+			"AMIC", "MICB";
 	};
 
-	spi4 {
+	spi-4 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_spi4>;
@@ -145,6 +135,10 @@
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
 		wlf,shared-lrclk;
+		wlf,hp-cfg = <3 2 3>;
+		wlf,gpio-cfg = <1 3>;
+		clocks = <&clks IMX6UL_CLK_SAI2>;
+		clock-names = "mclk";
 	};
 
 	camera@3c {
@@ -178,7 +172,7 @@
 	port {
 		parallel_from_ov5640: endpoint {
 			remote-endpoint = <&ov5640_to_parallel>;
-			bus-type = <5>; /* Parallel bus */
+			bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
 		};
 	};
 };
@@ -210,9 +204,6 @@
 			micrel,led-mode = <1>;
 			clocks = <&clks IMX6UL_CLK_ENET_REF>;
 			clock-names = "rmii-ref";
-			reset-gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <100>;
 
 		};
 
@@ -222,9 +213,6 @@
 			micrel,led-mode = <1>;
 			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
 			clock-names = "rmii-ref";
-			reset-gpios = <&gpio_spi 2 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <100>;
 		};
 	};
 };
@@ -243,6 +231,22 @@
 	status = "okay";
 };
 
+&gpio_spi {
+	eth0-phy-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "eth0-phy";
+	};
+
+	eth1-phy-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "eth1-phy";
+	};
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -284,13 +288,13 @@
 	pinctrl-0 = <&pinctrl_qspi>;
 	status = "okay";
 
-	flash0: n25q256a@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <0>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
index 935a77d717a6..18cac19aa9b0 100644
--- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
+++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
@@ -114,18 +114,6 @@
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
 	status = "okay";
-
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <5000000>;
-	};
 };
 
 &i2c1 {
diff --git a/arch/arm/boot/dts/imx6ul-kontron-bl-43.dts b/arch/arm/boot/dts/imx6ul-kontron-bl-43.dts
new file mode 100644
index 000000000000..0c643706a158
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-bl-43.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul-kontron-bl.dts"
+
+/ {
+	model = "Kontron BL i.MX6UL 43 (N631X S 43)";
+	compatible = "kontron,bl-imx6ul-43", "kontron,bl-imx6ul",
+		     "kontron,sl-imx6ul", "fsl,imx6ul";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm7 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+};
+
+&i2c4 {
+	touchscreen@5d {
+		compatible = "goodix,gt928";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cap_touch>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+		irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
+	/* Leave status disabled because of missing display panel node */
+};
+
+&pwm7 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_cap_touch: captouchgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x1b0b0 /* Touch Interrupt */
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0 /* Touch Reset */
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x1b0b0 /* Touch Wake */
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			MX6UL_PAD_LCD_RESET__LCDIF_RESET	0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__PWM7_OUT		0x110b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-bl-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-bl-common.dtsi
new file mode 100644
index 000000000000..43868311f48a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-bl-common.dtsi
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led1 {
+			label = "debug-led1";
+			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "debug-led2";
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "debug-led3";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm8 0 5000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_adc: regulator-vref-adc {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-adc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	vref-supply = <&reg_vref_adc>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	eeprom@0 {
+		compatible = "anvo,anv32e61w", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		spi-cpha;
+		spi-cpol;
+		pagesize = <1>;
+		size = <8192>;
+		address-width = <16>;
+	};
+};
+
+&fec1 {
+	pinctrl-0 = <&pinctrl_enet1>;
+	/delete-node/ mdio;
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&pwm8 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	rs485-rts-active-low;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	over-current-active-low;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
+
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0xb0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__ECSPI1_MISO	0x100b1
+			MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI	0x100b1
+			MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK	0x100b1
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x100b1	/* ECSPI1-CS1 */
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b009
+		>;
+	};
+
+	pinctrl_enet2_mdio: enet2mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp{
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0	/* DOUT1 */
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* DIN1 */
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x1b0b0	/* DOUT2 */
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0	/* DIN2 */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x1b0b0	/* LED H14 */
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x1b0b0	/* LED H15 */
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0	/* LED H16 */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL	0x4001f8b0
+			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA	0x4001f8b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__PWM8_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA04__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_NAND_DATA05__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS	0x1b0b1
+			/*
+			 * mux unused RTS to make sure it doesn't cause
+			 * any interrupts when it is undefined
+			 */
+			MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1 {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x100b1	/* SD1_CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-bl.dts b/arch/arm/boot/dts/imx6ul-kontron-bl.dts
new file mode 100644
index 000000000000..dadf6d3d5f52
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-bl.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-kontron-sl.dtsi"
+#include "imx6ul-kontron-bl-common.dtsi"
+
+/ {
+	model = "Kontron BL i.MX6UL (N631X S)";
+	compatible = "kontron,bl-imx6ul", "kontron,sl-imx6ul", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
deleted file mode 100644
index 5bfad4655b22..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
+++ /dev/null
@@ -1,103 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include "imx6ul-kontron-n6310-s.dts"
-
-/ {
-	model = "Kontron N6310 S 43";
-	compatible = "kontron,imx6ul-n6310-s-43", "kontron,imx6ul-n6310-s",
-		     "kontron,imx6ul-n6310-som", "fsl,imx6ul";
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm7 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-};
-
-&i2c4 {
-	touchscreen@5d {
-		compatible = "goodix,gt928";
-		reg = <0x5d>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cap_touch>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
-		irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
-	/* Leave status disabled because of missing display panel node */
-};
-
-&pwm7 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm7>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_cap_touch: captouchgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x1b0b0 /* Touch Interrupt */
-			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0 /* Touch Reset */
-			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x1b0b0 /* Touch Wake */
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdifctrlgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
-			MX6UL_PAD_LCD_RESET__LCDIF_RESET	0x79
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
-			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
-			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
-			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
-			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
-			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
-			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
-		>;
-	};
-
-	pinctrl_pwm7: pwm7grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_VSYNC__PWM7_OUT		0x110b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
deleted file mode 100644
index 5a3e06d6219b..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-/dts-v1/;
-
-#include "imx6ul-kontron-n6310-som.dtsi"
-#include "imx6ul-kontron-n6x1x-s.dtsi"
-
-/ {
-	model = "Kontron N6310 S";
-	compatible = "kontron,imx6ul-n6310-s", "kontron,imx6ul-n6310-som",
-		     "fsl,imx6ul";
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
deleted file mode 100644
index 47d3ce5d255f..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include "imx6ul.dtsi"
-#include "imx6ul-kontron-n6x1x-som-common.dtsi"
-
-/ {
-	model = "Kontron N6310 SOM";
-	compatible = "kontron,imx6ul-n6310-som", "fsl,imx6ul";
-
-	memory@80000000 {
-		reg = <0x80000000 0x10000000>;
-		device_type = "memory";
-	};
-};
-
-&qspi {
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		spi-max-frequency = <108000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		reg = <0>;
-
-		partition@0 {
-			label = "ubi1";
-			reg = <0x00000000 0x08000000>;
-		};
-
-		partition@8000000 {
-			label = "ubi2";
-			reg = <0x08000000 0x08000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts
deleted file mode 100644
index 239a1af3aeaa..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- */
-
-/dts-v1/;
-
-#include "imx6ul-kontron-n6311-som.dtsi"
-#include "imx6ul-kontron-n6x1x-s.dtsi"
-
-/ {
-	model = "Kontron N6311 S";
-	compatible = "kontron,imx6ul-n6311-s", "kontron,imx6ul-n6311-som",
-		     "fsl,imx6ul";
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
deleted file mode 100644
index a095a7654ac6..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- */
-
-#include "imx6ul.dtsi"
-#include "imx6ul-kontron-n6x1x-som-common.dtsi"
-
-/ {
-	model = "Kontron N6311 SOM";
-	compatible = "kontron,imx6ul-n6311-som", "fsl,imx6ul";
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-		device_type = "memory";
-	};
-};
-
-&qspi {
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		spi-max-frequency = <104000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		reg = <0>;
-
-		partition@0 {
-			label = "ubi1";
-			reg = <0x00000000 0x08000000>;
-		};
-
-		partition@8000000 {
-			label = "ubi2";
-			reg = <0x08000000 0x18000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
deleted file mode 100644
index 770f59b23102..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
+++ /dev/null
@@ -1,406 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led1 {
-			label = "debug-led1";
-			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "debug-led2";
-			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "debug-led3";
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	pwm-beeper {
-		compatible = "pwm-beeper";
-		pwms = <&pwm8 0 5000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_vref_adc: regulator-vref-adc {
-		compatible = "regulator-fixed";
-		regulator-name = "vref-adc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&adc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc1>;
-	num-channels = <3>;
-	vref-supply = <&reg_vref_adc>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	eeprom@0 {
-		compatible = "anvo,anv32e61w", "atmel,at25";
-		reg = <0>;
-		spi-max-frequency = <20000000>;
-		spi-cpha;
-		spi-cpol;
-		pagesize = <1>;
-		size = <8192>;
-		address-width = <16>;
-	};
-};
-
-&fec1 {
-	pinctrl-0 = <&pinctrl_enet1>;
-	/delete-node/ mdio;
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy2>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-			micrel,led-mode = <0>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-		};
-
-		ethphy2: ethernet-phy@2 {
-			reg = <2>;
-			micrel,led-mode = <0>;
-			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
-			clock-names = "rmii-ref";
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	status = "okay";
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-};
-
-&pwm8 {
-	#pwm-cells = <2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm8>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	linux,rs485-enabled-at-boot-time;
-	rs485-rx-during-tx;
-	rs485-rts-active-low;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbotg1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1>;
-	dr_mode = "otg";
-	srp-disable;
-	hnp-disable;
-	adp-disable;
-	over-current-active-low;
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	vbus-supply = <&reg_5v>;
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3v3>;
-	voltage-ranges = <3300 3300>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
-	non-removable;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3v3>;
-	voltage-ranges = <3300 3300>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
-
-	pinctrl_adc1: adc1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
-			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0xb0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA07__ECSPI1_MISO	0x100b1
-			MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI	0x100b1
-			MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK	0x100b1
-			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x100b1	/* ECSPI1-CS1 */
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b009
-		>;
-	};
-
-	pinctrl_enet2_mdio: enet2mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp{
-		fsl,pins = <
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_gpio: gpiogrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0	/* DOUT1 */
-			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0	/* DIN1 */
-			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x1b0b0	/* DOUT2 */
-			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0	/* DIN2 */
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x1b0b0	/* LED H14 */
-			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x1b0b0	/* LED H15 */
-			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0	/* LED H16 */
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
-			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c4: i2c4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL	0x4001f8b0
-			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA	0x4001f8b0
-		>;
-	};
-
-	pinctrl_pwm8: pwm8grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_HSYNC__PWM8_OUT		0x110b0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DATA04__UART2_DCE_TX	0x1b0b1
-			MX6UL_PAD_NAND_DATA05__UART2_DCE_RX	0x1b0b1
-			MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS	0x1b0b1
-			/*
-			 * mux unused RTS to make sure it doesn't cause
-			 * any interrupts when it is undefined
-			 */
-			MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
-			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
-			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg1: usbotg1 {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x1b0b0
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x100b1	/* SD1_CD */
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
-		>;
-	};
-
-	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
deleted file mode 100644
index 2a449a3c1ae2..000000000000
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	chosen {
-		stdout-path = &uart4;
-	};
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-
-	spi-flash@0 {
-		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-			micrel,led-mode = <0>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-		};
-	};
-};
-
-&fec2 {
-	phy-mode = "rmii";
-	status = "disabled";
-};
-
-&qspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi>;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_out>;
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA03__ECSPI2_MISO      0x100b1
-			MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI      0x100b1
-			MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK      0x100b1
-			MX6UL_PAD_CSI_DATA01__GPIO4_IO22       0x100b1
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b009
-		>;
-	};
-
-	pinctrl_enet1_mdio: enet1mdiogrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC         0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO        0x1b0b0
-		>;
-	};
-
-	pinctrl_qspi: qspigrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK        0x70a1
-			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00   0x70a1
-			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01     0x70a1
-			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02     0x70a1
-			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03       0x70a1
-			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B        0x70a1
-		>;
-	};
-
-	pinctrl_reset_out: rstoutgrp {
-		fsl,pins = <
-			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x18b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-sl-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-sl-common.dtsi
new file mode 100644
index 000000000000..dcf88f610346
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-sl-common.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x10000000>;
+		device_type = "memory";
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&fec2 {
+	phy-mode = "rmii";
+	status = "disabled";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		spi-max-frequency = <104000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+	};
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_out>;
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__ECSPI2_MISO      0x100b1
+			MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI      0x100b1
+			MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK      0x100b1
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22       0x100b1
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b009
+		>;
+	};
+
+	pinctrl_enet1_mdio: enet1mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC         0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO        0x1b0b0
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK        0x70a1
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00   0x70a1
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01     0x70a1
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02     0x70a1
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03       0x70a1
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B        0x70a1
+		>;
+	};
+
+	pinctrl_reset_out: rstoutgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x18b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-sl.dtsi b/arch/arm/boot/dts/imx6ul-kontron-sl.dtsi
new file mode 100644
index 000000000000..0580d043e5ae
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-sl.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-kontron-sl-common.dtsi"
+
+/ {
+	model = "Kontron SL i.MX6UL (N631X SOM)";
+	compatible = "kontron,sl-imx6ul", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
index 19a062635ff6..a3ea1b208462 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
@@ -30,7 +30,7 @@
 		pinctrl-0 = <&pinctrl_gpioleds_som>;
 		compatible = "gpio-leds";
 
-		phycore-green {
+		led-phycore-green {
 			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
@@ -68,8 +68,11 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
 	status = "okay";
 
@@ -99,6 +102,10 @@
 	status = "disabled";
 };
 
+&wdog1 {
+	fsl,suspend-in-wait;
+};
+
 &iomuxc {
 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
@@ -147,6 +154,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2cgpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x4001b8b0
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
index bff98e676980..607eddc5030f 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -10,6 +10,7 @@
 #include "imx6ul-phytec-segin.dtsi"
 #include "imx6ul-phytec-segin-peb-eval-01.dtsi"
 #include "imx6ul-phytec-segin-peb-av-02.dtsi"
+#include "imx6ul-phytec-segin-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND";
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
index 7cda6944501d..ec042648bd98 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
@@ -11,7 +11,7 @@
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <5>;
 		power-supply = <&reg_backlight_en>;
-		pwms = <&pwm3 0 5000000>;
+		pwms = <&pwm3 0 5000000 0>;
 		status = "disabled";
 	};
 
@@ -72,8 +72,8 @@
 			st,settling = <2>;
 			st,fraction-z = <7>;
 			st,i-drive = <1>;
-			touchscreen-inverted-x = <1>;
-			touchscreen-inverted-y = <1>;
+			touchscreen-inverted-x;
+			touchscreen-inverted-y;
 		};
 	};
 };
@@ -91,7 +91,6 @@
 };
 
 &pwm3 {
-	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "disabled";
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi
new file mode 100644
index 000000000000..04477fd4b9a9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Yunus Bas <y.bas@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	reg_wl_en: regulator-wl-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wl>;
+		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	pinctrl_bt: btgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x3031	/* BT ENABLE */
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x3031	/* HOST WAKEUP */
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0x3031	/* DEV WAKEUP */
+		>;
+	};
+
+	pinctrl_uart2_bt: uart2grp-bt {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX   0x17059
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX   0x17059
+			MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS    0x17059
+			MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS    0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_wl: usdhc2grp-wl {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA18__USDHC2_CMD    0x10051
+			MX6UL_PAD_LCD_DATA19__USDHC2_CLK    0x10061
+			MX6UL_PAD_LCD_DATA20__USDHC2_DATA0  0x10051
+			MX6UL_PAD_LCD_DATA21__USDHC2_DATA1  0x10051
+			MX6UL_PAD_LCD_DATA22__USDHC2_DATA2  0x10051
+			MX6UL_PAD_LCD_DATA23__USDHC2_DATA3  0x10051
+		>;
+	};
+
+	pinctrl_wl: wlgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x3031	/* WLAN ENABLE */
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_bt &pinctrl_bt>;
+	uart-has-rtscts;
+	status = "disabled";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_wl>;
+	vmmc-supply = <&reg_wl_en>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	status = "disabled";
+
+	brmcf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
index 95e4080dd0a6..38ea4dcfa228 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
@@ -83,11 +83,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_adc1>;
 	vref-supply = <&reg_adc1_vref_3v3>;
-	/*
-	 * driver can not separate a specific channel so we request 4 channels
-	 * here - we need only the fourth channel
-	 */
-	num-channels = <4>;
 	status = "disabled";
 };
 
@@ -191,6 +186,7 @@
 	no-1-8-v;
 	keep-power-in-suspend;
 	wakeup-source;
+	disable-wp;
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
index 162dc259edc8..5a74c7f68eb6 100644
--- a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
+++ b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts
@@ -32,7 +32,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts
index d62015701d0a..b7c96fbe7a91 100644
--- a/arch/arm/boot/dts/imx6ul-prti6g.dts
+++ b/arch/arm/boot/dts/imx6ul-prti6g.dts
@@ -26,6 +26,7 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
+		clock-output-names = "enet1_ref_pad";
 	};
 
 	leds {
@@ -60,6 +61,13 @@
 	status = "okay";
 };
 
+&clks {
+	clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&clock_ksz8081_out>;
+	clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "enet1_ref_pad";
+	assigned-clocks = <&clks IMX6UL_CLK_ENET1_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081_out>;
+};
+
 &ecspi1 {
 	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
@@ -78,12 +86,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
-
-	spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-	};
 };
 
 &fec1 {
@@ -91,12 +93,6 @@
 	pinctrl-0 = <&pinctrl_eth1>;
 	phy-mode = "rmii";
 	phy-handle = <&rmii_phy>;
-	clocks = <&clks IMX6UL_CLK_ENET>,
-		 <&clks IMX6UL_CLK_ENET_AHB>,
-		 <&clks IMX6UL_CLK_ENET_PTP>,
-		 <&clock_ksz8081_out>;
-	clock-names = "ipg", "ahb", "ptp",
-		      "enet_clk_ref";
 	status = "okay";
 
 	mdio {
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
new file mode 100644
index 000000000000..57e647fc3237
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/*
+ * Common for
+ * - TQMa6ULx
+ * - TQMa6ULxL
+ * - TQMa6ULLx
+ * - TQMa6ULLxL
+ */
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_recovery>;
+	scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pfuze3000: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			reg_sw1a: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <6250>;
+				/* not used */
+			};
+
+			reg_sw1b_core: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			reg_sw2: sw2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_sw3_ddr: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_swbst: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				/* not used */
+			};
+
+			reg_snvs_3v0: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vrefddr: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vccsd: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_v33_3v3: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vldo1_3v3: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				/* not used */
+			};
+
+			reg_vldo2: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				/* not used */
+			};
+
+			reg_vldo3: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				/* not used */
+			};
+
+			reg_vldo4: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	jc42_1a: eeprom-temperature@1a {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1a>;
+	};
+
+	m24c64_50: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	m24c02_52: eeprom@52 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+		read-only;
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pmic>;
+
+	/*
+	 * PMIC & temperature sensor IRQ
+	 * Both do currently not use IRQ
+	 * potentially dangerous if used on baseboard
+	 */
+	pmic-int-hog {
+		gpio-hog;
+		gpios = <24 0>;
+		input;
+	};
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <33000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+};
+
+/* eMMC */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz" , "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+
+	bus-width = <8>;
+	disable-wp;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL	0x4001b8b0
+			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c4_recovery: i2c4recoverygrp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x4001b8b0
+			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21	0x4001b8b0
+		>;
+	};
+
+	pinctrl_pmic: pmic {
+		fsl,pins = <
+			/* PMIC irq */
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x1b099
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts
new file mode 100644
index 000000000000..f2a5f17f312e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-tqma6ul1.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6UL1 SoM on MBa6ULx board";
+	compatible = "tq,imx6ul-tqma6ul1-mba6ulx", "tq,imx6ul-tqma6ul1", "fsl,imx6ul";
+};
+
+/*
+ * Note: can2 and fec2 are enabled on mba6ulx level (for i.MX6ULG2 usage)
+ * and need to be disabled here again
+ */
+&can2 {
+	status = "disabled";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_mdc>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			reg = <0>;
+		};
+	};
+};
+
+&fec2 {
+	/delete-property/ phy-handle;
+	/delete-node/ mdio;
+};
+
+&iomuxc {
+	pinctrl_enet1_mdc: enet1mdcgrp {
+		fsl,pins = <
+			/* mdio */
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi
new file mode 100644
index 000000000000..24192d012ef7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ul-tqma6ul2.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6UL1 SoM";
+	compatible = "tq,imx6ul-tqma6ul1", "fsl,imx6ul";
+};
+
+/*
+ * There are no module specific differences compared to TQMa6UL2,
+ * only external interfaces differ
+ */
+
+/*
+ * Devices not available on i.MX6ULG1 and should not be enabled on
+ * mainboard level (again)
+ */
+&can2 {
+	status = "disabled";
+};
+
+&csi {
+	status = "disabled";
+};
+
+&fec2 {
+	status = "disabled";
+};
+
+&lcdif {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts
new file mode 100644
index 000000000000..0757df2b8f48
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-tqma6ul2.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6ULx SoM on MBa6ULx board";
+	compatible = "tq,imx6ul-tqma6ul2-mba6ulx", "tq,imx6ul-tqma6ul2", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi
new file mode 100644
index 000000000000..e2e95dd92263
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulx-common.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6UL2 SoM";
+	compatible = "tq,imx6ul-tqma6ul2", "fsl,imx6ul";
+};
+
+&usdhc2 {
+	fsl,tuning-step = <6>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017051
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017051
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017051
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017051
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017051
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017051
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017051
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017051
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017051
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017051
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170e1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170e1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170e1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170e1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170e1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170e1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170e1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170e1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170e1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170e1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts
new file mode 100644
index 000000000000..9d9b6b744a1c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-tqma6ul2l.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ Systems TQMa6UL2L SoM on MBa6ULx board";
+	compatible = "tq,imx6ul-tqma6ul2l-mba6ulx", "tq,imx6ul-tqma6ul2l", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi
new file mode 100644
index 000000000000..4b87e2dc70dc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulxl-common.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6UL2L SoM";
+	compatible = "tq,imx6ul-tqma6ul2l", "fsl,imx6ul";
+};
+
+&usdhc2 {
+	fsl,tuning-step = <6>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017051
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017051
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017051
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017051
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017051
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017051
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017051
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017051
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017051
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017051
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170e1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi
new file mode 100644
index 000000000000..5afb9046c202
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/*
+ * Common for
+ * - TQMa6ULx
+ * - TQMa6ULLx
+ */
+
+&m24c64_50 {
+	vcc-supply = <&reg_sw2>;
+};
+
+&m24c02_52 {
+	vcc-supply = <&reg_sw2>;
+};
+
+&reg_sw2 {
+	regulator-boot-on;
+	regulator-always-on;
+};
+
+/* eMMC */
+&usdhc2 {
+	vmmc-supply = <&reg_sw2>;
+	vqmmc-supply = <&reg_vldo4>;
+};
+
+&iomuxc {
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70b9
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70b9
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70b9
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70b9
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70b9
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi
new file mode 100644
index 000000000000..ba84a4f70ebd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/*
+ * Common for
+ * - TQMa6ULxL
+ * - TQMa6ULLxL
+ */
+
+/ {
+	reg_vin: reg-vin {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&m24c64_50 {
+	vcc-supply = <&reg_vin>;
+};
+
+&m24c02_52 {
+	vcc-supply = <&reg_vin>;
+};
+
+/* eMMC */
+&usdhc2 {
+	vmmc-supply = <&reg_vin>;
+	vqmmc-supply = <&reg_vldo4>;
+};
+
+&iomuxc {
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70a9
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a9
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70a9
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70a9
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70a9
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
index 97686097a86e..92ac0edcb608 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
+++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
@@ -119,7 +119,7 @@
 	/delete-node/ codec@a;
 	/delete-node/ touchscreen@48;
 
-	rtc: mcp7940x@6f {
+	rtc: rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 	};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
index 938a32ced88d..70cef5e817bd 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
@@ -131,7 +131,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		user_led: user {
+		user_led: led-user {
 			label = "Heartbeat";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_led>;
@@ -212,7 +212,7 @@
 		enable-active-high;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "spi-gpio";
@@ -227,18 +227,6 @@
 			&gpio1 10 GPIO_ACTIVE_HIGH
 		>;
 		status = "disabled";
-
-		spi@0 {
-			compatible = "spidev";
-			reg = <0>;
-			spi-max-frequency = <660000>;
-		};
-
-		spi@1 {
-			compatible = "spidev";
-			reg = <1>;
-			spi-max-frequency = <660000>;
-		};
 	};
 
 	sound {
@@ -290,18 +278,6 @@
 		&gpio1 10 GPIO_ACTIVE_HIGH
 	>;
 	status = "disabled";
-
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <60000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <60000000>;
-	};
 };
 
 &fec1 {
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index afeec01f6522..3d9d0f823568 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -64,20 +64,18 @@
 			clock-frequency = <696000000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			#cooling-cells = <2>;
-			operating-points = <
+			operating-points =
 				/* kHz	uV */
-				696000	1275000
-				528000	1175000
-				396000	1025000
-				198000	950000
-			>;
-			fsl,soc-operating-points = <
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1025000>,
+				<198000	950000>;
+			fsl,soc-operating-points =
 				/* KHz	uV */
-				696000	1275000
-				528000	1175000
-				396000	1175000
-				198000	1175000
-			>;
+				<696000	1275000>,
+				<528000	1175000>,
+				<396000	1175000>,
+				<198000	1175000>;
 			clocks = <&clks IMX6UL_CLK_ARM>,
 				 <&clks IMX6UL_CLK_PLL2_BUS>,
 				 <&clks IMX6UL_CLK_PLL2_PFD2>,
@@ -139,7 +137,7 @@
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -149,6 +147,9 @@
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 
 		intc: interrupt-controller@a01000 {
@@ -170,7 +171,6 @@
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
 				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
 			clocks = <&clks IMX6UL_CLK_APBHDMA>;
@@ -531,10 +531,9 @@
 				clocks = <&clks IMX6UL_CLK_ENET>,
 					 <&clks IMX6UL_CLK_ENET_AHB>,
 					 <&clks IMX6UL_CLK_ENET_PTP>,
-					 <&clks IMX6UL_CLK_ENET2_REF_125M>,
-					 <&clks IMX6UL_CLK_ENET2_REF_125M>;
+					 <&clks IMX6UL_CLK_ENET2_REF_SEL>;
 				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
+					      "enet_clk_ref";
 				fsl,num-tx-queues = <1>;
 				fsl,num-rx-queues = <1>;
 				fsl,stop-mode = <&gpr 0x10 4>;
@@ -543,7 +542,7 @@
 			};
 
 			kpp: keypad@20b8000 {
-				compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
+				compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
 				reg = <0x020b8000 0x4000>;
 				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_KPP>;
@@ -743,7 +742,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@20ec000 {
+			sdma: dma-controller@20ec000 {
 				compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
 					     "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
@@ -879,10 +878,9 @@
 				clocks = <&clks IMX6UL_CLK_ENET>,
 					 <&clks IMX6UL_CLK_ENET_AHB>,
 					 <&clks IMX6UL_CLK_ENET_PTP>,
-					 <&clks IMX6UL_CLK_ENET_REF>,
-					 <&clks IMX6UL_CLK_ENET_REF>;
+					 <&clks IMX6UL_CLK_ENET1_REF_SEL>;
 				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
+					      "enet_clk_ref";
 				fsl,num-tx-queues = <1>;
 				fsl,num-rx-queues = <1>;
 				fsl,stop-mode = <&gpr 0x10 3>;
@@ -923,7 +921,6 @@
 				reg = <0x02198000 0x4000>;
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_ADC1>;
-				num-channels = <2>;
 				clock-names = "adc";
 				fsl,adck-max-frequency = <30000000>, <40000000>,
 							 <20000000>;
@@ -998,7 +995,7 @@
 			};
 
 			csi: csi@21c4000 {
-				compatible = "fsl,imx6ul-csi", "fsl,imx7-csi";
+				compatible = "fsl,imx6ul-csi";
 				reg = <0x021c4000 0x4000>;
 				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_CSI>;
@@ -1007,7 +1004,7 @@
 			};
 
 			lcdif: lcdif@21c8000 {
-				compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
+				compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif";
 				reg = <0x021c8000 0x4000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
@@ -1028,7 +1025,7 @@
 			qspi: spi@21e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
+				compatible = "fsl,imx6ul-qspi";
 				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
 				reg-names = "QuadSPI", "QuadSPI-memory";
 				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-aster.dts
new file mode 100644
index 000000000000..3e0897c3a296
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Aster";
+	compatible = "toradex,colibri-imx6ull-aster",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi
new file mode 100644
index 000000000000..de4dc7c1a03a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+		power {
+			label = "Wake-Up";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&ecspi1 {
+	status = "okay";
+
+	num-cs = <2>;
+	cs-gpios = <
+		&gpio3 26 GPIO_ACTIVE_HIGH /* SODIMM 86 LCD_DATA21 */
+		&gpio4 28 GPIO_ACTIVE_HIGH /* SODIMM 65 CSI_DATA07 */
+	>;
+};
+
+/*
+ * Following SODIMM Pins should not be accessed as GPIO on Aster board:
+ * 134 - AIN5_SCL (no connection)
+ * 127 - Voltage Level Translator OE# signal (IC11 and IC12)
+ *
+ * To configure GPIO to LED5, please disable FEC2 and uncomment the following:
+ *	&iomuxc {
+ *		pinctrl-names = "default";
+ *		pinctrl-0 = <
+ *			&pinctrl_gpio1
+ *			&pinctrl_gpio2
+ *			&pinctrl_gpio3
+ *			&pinctrl_gpio4
+ *			&pinctrl_gpio6 - for non-WiFi modules only
+ *			&pinctrl_gpio7
+ *			&pinctrl_gpio_aster
+ *		>;
+ *
+ *		pinctrl_gpio_aster: gpio-aster {
+ *			fsl,pins = <
+ *				MX6UL_PAD_GPIO1_IO07__GPIO1_IO07    0x1b0b0
+ *			>;
+ *		};
+ *  };
+ */
+
+&i2c1 {
+	status = "okay";
+
+	m41t0m6: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/* PWM <A> */
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	status = "okay";
+};
+
+/* PWM <C> */
+&pwm6 {
+	status = "okay";
+};
+
+/* PWM <D> */
+&pwm7 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usdhc1 {
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts
new file mode 100644
index 000000000000..919c0464d6cb
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Aster";
+	compatible = "toradex,colibri-imx6ull-emmc-aster",
+		     "toradex,colibri-imx6ull-emmc",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts
new file mode 100644
index 000000000000..61b93cb040c7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx6ull-emmc-eval",
+		     "toradex,colibri-imx6ull-emmc",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts
new file mode 100644
index 000000000000..b9060c2f7977
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1G (eMMC) on Colibri Iris V2";
+	compatible = "toradex,colibri-imx6ull-iris-v2",
+		     "toradex,colibri-imx6ull-emmc",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts
new file mode 100644
index 000000000000..0ab71f2f5daa
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Iris";
+	compatible = "toradex,colibri-imx6ull-emmc-iris",
+		     "toradex,colibri-imx6ull-emmc",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi
new file mode 100644
index 000000000000..ea238525d5c0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include "imx6ull-colibri.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &usdhc2; /* eMMC */
+		mmc1 = &usdhc1; /* MMC 4-bit slot */
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_8",
+			  "SODIMM_6",
+			  "SODIMM_129",
+			  "SODIMM_89",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184",
+			  "SODIMM_4",
+			  "SODIMM_2",
+			  "SODIMM_106",
+			  "SODIMM_71",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_99",
+			  "SODIMM_102",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_32",
+			  "SODIMM_34",
+			  "SODIMM_135",
+			  "SODIMM_77",
+			  "SODIMM_100",
+			  "SODIMM_186",
+			  "SODIMM_196",
+			  "SODIMM_194";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_73",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "SODIMM_104",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_190",
+			  "SODIMM_47",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_29",
+			  "SODIMM_37",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_140",
+			  "SODIMM_59",
+			  "SODIMM_142",
+			  "SODIMM_144",
+			  "SODIMM_133",
+			  "SODIMM_146",
+			  "SODIMM_28",
+			  "SODIMM_75",
+			  "SODIMM_96",
+			  "SODIMM_81",
+			  "SODIMM_94",
+			  "SODIMM_101",
+			  "SODIMM_103",
+			  "SODIMM_79",
+			  "SODIMM_97",
+			  "SODIMM_69",
+			  "SODIMM_98",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_137",
+			  "SODIMM_95",
+			  "SODIMM_107",
+			  "SODIMM_131",
+			  "SODIMM_93",
+			  "",
+			  "SODIMM_138",
+			  "",
+			  "SODIMM_105",
+			  "SODIMM_127";
+};
+
+/* NAND */
+&gpmi {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
+		&pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7
+		&pinctrl_gpmi_gpio>;
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
+};
+
+/* eMMC */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2emmc>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+	bus-width = <8>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_module_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
index 08669a18349e..d6da984e518d 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2022 Toradex
  */
 
 /dts-v1/;
@@ -9,6 +9,30 @@
 #include "imx6ull-colibri-eval-v3.dtsi"
 
 / {
-	model = "Toradex Colibri iMX6ULL 256MB on Colibri Evaluation Board V3";
+	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Evaluation Board V3";
 	compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull";
 };
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
index a78849fd2afa..692ef26fbab3 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2017 Toradex AG
+ * Copyright 2017-2022 Toradex
  */
 
 / {
@@ -8,20 +8,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
-
-		power {
-			label = "Wake-Up";
-			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
 	/* fixed crystal dedicated to mcp2515 */
 	clk16m: clk16m {
 		compatible = "fixed-clock";
@@ -29,18 +15,6 @@
 		clock-frequency = <16000000>;
 	};
 
-	panel: panel {
-		compatible = "edt,et057090dhu";
-		backlight = <&bl>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lcdif_out>;
-			};
-		};
-	};
-
 	reg_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
@@ -71,14 +45,6 @@
 	status = "okay";
 };
 
-&bl {
-	brightness-levels = <0 4 8 16 32 64 128 255>;
-	default-brightness-level = <6>;
-	power-supply = <&reg_3v3>;
-	pwms = <&pwm4 0 5000000 1>;
-	status = "okay";
-};
-
 &ecspi1 {
 	status = "okay";
 
@@ -107,16 +73,6 @@
 	};
 };
 
-&lcdif {
-	status = "okay";
-
-	port {
-		lcdif_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
 /* PWM <A> */
 &pwm4 {
 	status = "okay";
@@ -150,29 +106,18 @@
 };
 
 &usbotg1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
+	disable-over-current;
 	vbus-supply = <&reg_usbh_vbus>;
 	status = "okay";
 };
 
 &usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>;
-	pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_sleep_cd>;
-	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	wakeup-source;
-	keep-power-in-suspend;
 	vmmc-supply = <&reg_3v3>;
-	vqmmc-supply = <&reg_sd1_vmmc>;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
new file mode 100644
index 000000000000..f6b31118be17
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256M/512B on Colibri Iris V2";
+	compatible = "toradex,colibri-imx6ull-iris-v2",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&gpio1 {
+	/* This turns the LVDS transceiver on */
+	lvds-power-on-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode-hog {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+};
+
+&gpio5 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi
new file mode 100644
index 000000000000..93649cad0cc0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+	};
+};
+
+
+&usdhc1 {
+	cap-power-off-card;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	/delete-property/ keep-power-in-suspend;
+	/delete-property/ no-1-8-v;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-iris.dts
new file mode 100644
index 000000000000..2a0d0fc3b9d6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Iris";
+	compatible = "toradex,colibri-imx6ull-iris",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
new file mode 100644
index 000000000000..f52f8b5ad8a6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+		power {
+			label = "Wake-Up";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&gpio1 {
+	/*
+	 * uart25_tx_on turns the UART transceiver on. If one wants to turn the
+	 * transceiver off, that property has to be deleted and the gpio handled
+	 * in userspace.
+	 * The same applies to uart1_tx_on.
+	 */
+	uart25_tx_on-hog {
+		gpio-hog;
+		gpios = <15 0>;
+		output-high;
+	};
+};
+
+&gpio2 {
+	uart1_tx_on-hog {
+		gpio-hog;
+		gpios = <7 0>;
+		output-high;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	m41t0m6: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/* PWM <A> */
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	status = "okay";
+};
+
+/* PWM <C> */
+&pwm6 {
+	status = "okay";
+};
+
+/* PWM <D> */
+&pwm7 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh_vbus>;
+	status = "okay";
+};
+
+&usdhc1 {
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
index 95a11b8bcbdb..88901db255d6 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2022 Toradex
  */
 
 #include "imx6ull-colibri.dtsi"
@@ -12,13 +12,150 @@
 	};
 };
 
+&gpio1 {
+	gpio-line-names = "SODIMM_8",
+			  "SODIMM_6",
+			  "SODIMM_129",
+			  "SODIMM_89",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184",
+			  "SODIMM_4",
+			  "SODIMM_2",
+			  "SODIMM_106",
+			  "SODIMM_71",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_99",
+			  "SODIMM_102",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_32",
+			  "SODIMM_34",
+			  "SODIMM_135",
+			  "SODIMM_77",
+			  "SODIMM_100",
+			  "SODIMM_186",
+			  "SODIMM_196",
+			  "SODIMM_194";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_73",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "SODIMM_104",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_190",
+			  "SODIMM_47",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_29",
+			  "SODIMM_37",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_59",
+			  "",
+			  "",
+			  "SODIMM_133",
+			  "",
+			  "SODIMM_28",
+			  "SODIMM_75",
+			  "SODIMM_96",
+			  "SODIMM_81",
+			  "SODIMM_94",
+			  "SODIMM_101",
+			  "SODIMM_103",
+			  "SODIMM_79",
+			  "SODIMM_97",
+			  "SODIMM_69",
+			  "SODIMM_98",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_137",
+			  "SODIMM_95",
+			  "SODIMM_107",
+			  "SODIMM_131",
+			  "SODIMM_93",
+			  "",
+			  "SODIMM_138",
+			  "",
+			  "SODIMM_105",
+			  "SODIMM_127";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
-		&pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6 &pinctrl_gpio7>;
+		&pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7>;
 };
 
 &iomuxc_snvs {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2 &pinctrl_snvs_gpio3>;
+	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
 };
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts
new file mode 100644
index 000000000000..c7da5b41966f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Aster";
+	compatible = "toradex,colibri-imx6ull-wifi-aster",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
+
+/* PWM <C> */
+&pwm6 {
+	/* Pin already used by atmel_mxt_ts touchscreen */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
index df72ce1ae2cb..917f5dbe64ba 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2022 Toradex
  */
 
 /dts-v1/;
@@ -12,3 +12,27 @@
 	model = "Toradex Colibri iMX6ULL 512MB on Colibri Evaluation Board V3";
 	compatible = "toradex,colibri-imx6ull-wifi-eval", "fsl,imx6ull";
 };
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
new file mode 100644
index 000000000000..488da6df56fa
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris V2";
+	compatible = "toradex,colibri-imx6ull-wifi-iris-v2",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&gpio1 {
+	/* This turns the LVDS transceiver on */
+	lvds-power-on-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode-hog {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+};
+
+&gpio5 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts
new file mode 100644
index 000000000000..e63253254754
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris";
+	compatible = "toradex,colibri-imx6ull-wifi-iris",
+		     "toradex,colibri-imx6ull",
+		     "fsl,imx6ull";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
index a0545431b3dc..db59ee6b1c86 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2022 Toradex
  */
 
 #include "imx6ull-colibri.dtsi"
@@ -23,16 +23,152 @@
 	clock-frequency = <792000000>;
 };
 
+&gpio1 {
+	gpio-line-names = "SODIMM_8",
+			  "SODIMM_6",
+			  "SODIMM_129",
+			  "",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184",
+			  "SODIMM_4",
+			  "SODIMM_2",
+			  "SODIMM_106",
+			  "SODIMM_71",
+			  "SODIMM_23",
+			  "SODIMM_31",
+			  "SODIMM_99",
+			  "SODIMM_102",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_32",
+			  "SODIMM_34",
+			  "SODIMM_135",
+			  "SODIMM_77",
+			  "SODIMM_100",
+			  "SODIMM_186",
+			  "SODIMM_196",
+			  "SODIMM_194";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_73",
+			  "SODIMM_30",
+			  "SODIMM_67",
+			  "SODIMM_104",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_190",
+			  "SODIMM_47",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_29",
+			  "SODIMM_37",
+			  "SODIMM_88",
+			  "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_59",
+			  "",
+			  "",
+			  "SODIMM_133",
+			  "",
+			  "SODIMM_28",
+			  "SODIMM_75",
+			  "SODIMM_96",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_69",
+			  "SODIMM_98",
+			  "SODIMM_85",
+			  "SODIMM_65";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_137",
+			  "SODIMM_95",
+			  "SODIMM_107",
+			  "SODIMM_131",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_105";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
-		&pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio7>;
+		&pinctrl_gpio4 &pinctrl_gpio7>;
 
 };
 
 &iomuxc_snvs {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2>;
+	pinctrl-0 = <&pinctrl_snvs_gpio1>;
 };
 
 &usdhc2 {
@@ -43,6 +179,7 @@
 	assigned-clock-rates = <0>, <198000000>;
 	cap-power-off-card;
 	keep-power-in-suspend;
+	max-frequency = <25000000>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	no-1-8-v;
 	non-removable;
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 4436556624d6..fde8a19aac0f 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -1,24 +1,72 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2022 Toradex
  */
 
 #include "imx6ull.dtsi"
 
 / {
+	/* Ethernet aliases to ensure correct MAC addresses */
 	aliases {
 		ethernet0 = &fec2;
 		ethernet1 = &fec1;
 	};
 
-	bl: backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+		pwms = <&pwm4 0 5000000 1>;
 		status = "disabled";
 	};
 
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_usbc_det>;
+		id-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		label = "USBC";
+		self-powered;
+		type = "micro";
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio5 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	panel_dpi: panel-dpi {
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
 	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
 		regulator-always-on;
@@ -35,9 +83,9 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	reg_sd1_vmmc: regulator-sd1-vmmc {
+	reg_sd1_vqmmc: regulator-sd1-vqmmc {
 		compatible = "regulator-gpio";
-		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
 		regulator-always-on;
@@ -47,11 +95,24 @@
 		states = <1800000 0x1 3300000 0x0>;
 		vin-supply = <&reg_module_3v3>;
 	};
+
+	reg_eth_phy: regulator-eth-phy {
+		compatible = "regulator-fixed-clock";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "+V3.3_ETH";
+		regulator-type = "voltage";
+		vin-supply = <&reg_module_3v3>;
+		clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
+		startup-delay-us = <150000>;
+	};
 };
 
 &adc1 {
-	num-channels = <10>;
 	vref-supply = <&reg_module_3v3_avdd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
 };
 
 &can1 {
@@ -73,12 +134,14 @@
 	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
 };
 
+/* Ethernet */
 &fec2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&pinctrl_enet2>;
 	pinctrl-1 = <&pinctrl_enet2_sleep>;
 	phy-mode = "rmii";
 	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_eth_phy>;
 	status = "okay";
 
 	mdio {
@@ -93,9 +156,11 @@
 	};
 };
 
+/* NAND */
 &gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	fsl,use-minimum-ecc;
 	nand-on-flash-bbt;
 	nand-ecc-mode = "hw";
 	nand-ecc-strength = <8>;
@@ -103,15 +168,35 @@
 	status = "okay";
 };
 
+/* I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */
 &i2c1 {
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
 	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+
+	/* Atmel maxtouch controller */
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_atmel_conn &pinctrl_atmel_snvs_conn>;
+		reg = <0x4a>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;       /* SODIMM 107 / INT */
+		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;    /* SODIMM 106 / RST */
+		status = "disabled";
+	};
 };
 
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
 &i2c2 {
+	/* Use low frequency to compensate for the high pull-up values. */
+	clock-frequency = <40000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
@@ -119,7 +204,7 @@
 	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	ad7879@2c {
+	ad7879_ts: touchscreen@2c {
 		compatible = "adi,ad7879-1";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_ad7879_int>;
@@ -133,6 +218,7 @@
 		adi,median-filter-size = /bits/ 8 <2>;
 		adi,averaging = /bits/ 8 <1>;
 		adi,conversion-interval = /bits/ 8 <255>;
+		status = "disabled";
 	};
 };
 
@@ -140,23 +226,34 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lcdif_dat
 		     &pinctrl_lcdif_ctrl>;
+	status = "disabled";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
 };
 
+/* PWM <A> */
 &pwm4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 };
 
+/* PWM <B> */
 &pwm5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm5>;
 };
 
+/* PWM <C> */
 &pwm6 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm6>;
 };
 
+/* PWM <D> */
 &pwm7 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm7>;
@@ -170,6 +267,7 @@
 	status = "disabled";
 };
 
+/* Colibri UART_A */
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>;
@@ -177,6 +275,7 @@
 	fsl,dte-mode;
 };
 
+/* Colibri UART_B */
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
@@ -184,27 +283,50 @@
 	fsl,dte-mode;
 };
 
+/* Colibri UART_C */
 &uart5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5>;
 	fsl,dte-mode;
 };
 
+/* Colibri USBC */
 &usbotg1 {
 	dr_mode = "otg";
 	srp-disable;
 	hnp-disable;
 	adp-disable;
+	usb-role-switch;
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
 };
 
+/* Colibri USBH */
 &usbotg2 {
 	dr_mode = "host";
 };
 
+/* Colibri MMC/SD */
 &usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd_sleep>;
 	assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>;
 	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
 	assigned-clock-rates = <0>, <198000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */
+	disable-wp;
+	keep-power-in-suspend;
+	no-1-8-v;
+	vqmmc-supply = <&reg_sd1_vqmmc>;
+	wakeup-source;
 };
 
 &wdog1 {
@@ -214,13 +336,35 @@
 };
 
 &iomuxc {
-	pinctrl_can_int: canint-grp {
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00        0x3000 /* SODIMM 8 */
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01        0x3000 /* SODIMM 6 */
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08        0x3000 /* SODIMM 4 */
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x3000 /* SODIMM 2 */
+		>;
+	};
+
+	pinctrl_atmel_adap: atmeladapgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DQS__GPIO4_IO16          0xb0a0  /* SODIMM 28 */
+			MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05       0xb0a0  /* SODIMM 30 */
+		>;
+	};
+
+	pinctrl_atmel_conn: atmelconngrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_MOD__GPIO1_IO10          0xb0a0  /* SODIMM 106 */
+		>;
+	};
+
+	pinctrl_can_int: canintgrp {
 		fsl,pins = <
 			MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04	0x13010	/* SODIMM 73 */
 		>;
 	};
 
-	pinctrl_enet2: enet2-grp {
+	pinctrl_enet2: enet2grp {
 		fsl,pins = <
 			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
 			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
@@ -235,7 +379,7 @@
 		>;
 	};
 
-	pinctrl_enet2_sleep: enet2sleepgrp {
+	pinctrl_enet2_sleep: enet2-sleepgrp {
 		fsl,pins = <
 			MX6UL_PAD_GPIO1_IO06__GPIO1_IO06	0x0
 			MX6UL_PAD_GPIO1_IO07__GPIO1_IO07	0x0
@@ -250,13 +394,13 @@
 		>;
 	};
 
-	pinctrl_ecspi1_cs: ecspi1-cs-grp {
+	pinctrl_ecspi1_cs: ecspi1csgrp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x70a0	/* SODIMM 86 */
 		>;
 	};
 
-	pinctrl_ecspi1: ecspi1-grp {
+	pinctrl_ecspi1: ecspi1grp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x000a0	/* SODIMM 88 */
 			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x000a0 /* SODIMM 92 */
@@ -264,27 +408,27 @@
 		>;
 	};
 
-	pinctrl_flexcan1: flexcan1-grp {
+	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX	0x1b020
 			MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX	0x1b020
 		>;
 	};
 
-	pinctrl_flexcan2: flexcan2-grp {
+	pinctrl_flexcan2: flexcan2grp {
 		fsl,pins = <
 			MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX	0x1b020
 			MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX	0x1b020
 		>;
 	};
 
-	pinctrl_gpio_bl_on: gpio-bl-on-grp {
+	pinctrl_gpio_bl_on: gpioblongrp {
 		fsl,pins = <
 			MX6UL_PAD_JTAG_TMS__GPIO1_IO11		0x30a0	/* SODIMM 71 */
 		>;
 	};
 
-	pinctrl_gpio1: gpio1-grp {
+	pinctrl_gpio1: gpio1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x10b0 /* SODIMM 77 */
 			MX6UL_PAD_JTAG_TCK__GPIO1_IO14		0x70a0 /* SODIMM 99 */
@@ -297,7 +441,7 @@
 		>;
 	};
 
-	pinctrl_gpio2: gpio2-grp { /* Camera */
+	pinctrl_gpio2: gpio2grp { /* Camera */
 		fsl,pins = <
 			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x10b0 /* SODIMM 69 */
 			MX6UL_PAD_CSI_MCLK__GPIO4_IO17		0x10b0 /* SODIMM 75 */
@@ -307,26 +451,20 @@
 		>;
 	};
 
-	pinctrl_gpio3: gpio3-grp { /* CAN2 */
+	pinctrl_gpio3: gpio3grp { /* CAN2 */
 		fsl,pins = <
 			MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02	0x10b0 /* SODIMM 178 */
 			MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03	0x10b0 /* SODIMM 188 */
 		>;
 	};
 
-	pinctrl_gpio4: gpio4-grp {
+	pinctrl_gpio4: gpio4grp {
 		fsl,pins = <
 			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x10b0 /* SODIMM 65 */
 		>;
 	};
 
-	pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */
-		fsl,pins = <
-			MX6UL_PAD_JTAG_MOD__GPIO1_IO10		0xb0a0 /* SODIMM 106 */
-		>;
-	};
-
-	pinctrl_gpio6: gpio6-grp { /* Wifi pins */
+	pinctrl_gpio6: gpio6grp { /* Wifi pins */
 		fsl,pins = <
 			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x10b0 /* SODIMM 89 */
 			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0 /* SODIMM 79 */
@@ -338,14 +476,27 @@
 		>;
 	};
 
-	pinctrl_gpio7: gpio7-grp { /* CAN1 */
+	pinctrl_gpio7: gpio7grp { /* CAN1 */
 		fsl,pins = <
 			MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00	0xb0b0/* SODIMM 55 */
 			MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01	0xb0b0 /* SODIMM 63 */
 		>;
 	};
 
-	pinctrl_gpmi_nand: gpmi-nand-grp {
+	/*
+	 * With an eMMC instead of a raw NAND device the following pins
+	 * are available at SODIMM pins.
+	 */
+	pinctrl_gpmi_gpio: gpmigpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x10b0 /* SODIMM 140 */
+			MX6UL_PAD_NAND_CE0_B__GPIO4_IO13	0x10b0 /* SODIMM 144 */
+			MX6UL_PAD_NAND_CLE__GPIO4_IO15		0x10b0 /* SODIMM 146 */
+			MX6UL_PAD_NAND_READY_B__GPIO4_IO12	0x10b0 /* SODIMM 142 */
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x100a9
 			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x100a9
@@ -364,35 +515,35 @@
 		>;
 	};
 
-	pinctrl_i2c1: i2c1-grp {
+	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0	/* SODIMM 196 */
 			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0	/* SODIMM 194 */
 		>;
 	};
 
-	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+	pinctrl_i2c1_gpio: i2c1-gpiogrp {
 		fsl,pins = <
 			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0	/* SODIMM 196 */
 			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0	/* SODIMM 194 */
 		>;
 	};
 
-	pinctrl_i2c2: i2c2-grp {
+	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
-			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b0
 		>;
 	};
 
-	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+	pinctrl_i2c2_gpio: i2c2-gpiogrp {
 		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001b8b0
-			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001b8b0
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001f8b0
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001f8b0
 		>;
 	};
 
-	pinctrl_lcdif_dat: lcdif-dat-grp {
+	pinctrl_lcdif_dat: lcdifdatgrp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079	/* SODIMM 76 */
 			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079	/* SODIMM 70 */
@@ -415,7 +566,7 @@
 		>;
 	};
 
-	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x00079	/* SODIMM 56 */
 			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x00079	/* SODIMM 44 */
@@ -424,31 +575,31 @@
 		>;
 	};
 
-	pinctrl_pwm4: pwm4-grp {
+	pinctrl_pwm4: pwm4grp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_WP_B__PWM4_OUT	0x00079		/* SODIMM 59 */
 		>;
 	};
 
-	pinctrl_pwm5: pwm5-grp {
+	pinctrl_pwm5: pwm5grp {
 		fsl,pins = <
 			MX6UL_PAD_NAND_DQS__PWM5_OUT	0x00079		/* SODIMM 28 */
 		>;
 	};
 
-	pinctrl_pwm6: pwm6-grp {
+	pinctrl_pwm6: pwm6grp {
 		fsl,pins = <
 			MX6UL_PAD_ENET1_TX_EN__PWM6_OUT	0x00079		/* SODIMM 30 */
 		>;
 	};
 
-	pinctrl_pwm7: pwm7-grp {
+	pinctrl_pwm7: pwm7grp {
 		fsl,pins = <
 			MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT	0x00079	/* SODIMM 67 */
 		>;
 	};
 
-	pinctrl_uart1: uart1-grp {
+	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX	0x1b0b1	/* SODIMM 33 */
 			MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX	0x1b0b1	/* SODIMM 35 */
@@ -457,16 +608,16 @@
 		>;
 	};
 
-	pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */
+	pinctrl_uart1_ctrl1: uart1ctrl1grp { /* Additional DTR, DCD */
 		fsl,pins = <
-			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x70a0 /* SODIMM 31 */
-			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x10b0 /* SODIMM 29 */
-			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x90b1 /* SODIMM 23 */
-			MX6UL_PAD_LCD_DATA19__GPIO3_IO24        0x10b0 /* SODIMM 37 */
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13		0x70a0 /* SODIMM 31 / DCD */
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0x10b0 /* SODIMM 29 / DSR */
+			MX6UL_PAD_JTAG_TDO__GPIO1_IO12		0x90b1 /* SODIMM 23 / DTR */
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24        0x10b0 /* SODIMM 37 / RI */
 		>;
 	};
 
-	pinctrl_uart2: uart2-grp {
+	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX	0x1b0b1 /* SODIMM 36 */
 			MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX	0x1b0b1 /* SODIMM 38 */
@@ -474,23 +625,23 @@
 			MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS	0x1b0b1 /* SODIMM 34 */
 		>;
 	};
-	pinctrl_uart5: uart5-grp {
+	pinctrl_uart5: uart5grp {
 		fsl,pins = <
 			MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX	0x1b0b1 /* SODIMM 19 */
 			MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX	0x1b0b1 /* SODIMM 21 */
 		>;
 	};
 
-	pinctrl_usbh_reg: gpio-usbh-reg {
+	pinctrl_usbh_reg: usbhreggrp {
 		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x10b0 /* SODIMM 129 */
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x10b0 /* SODIMM 129 / USBH_PEN */
 		>;
 	};
 
-	pinctrl_usdhc1: usdhc1-grp {
+	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x17059 /* SODIMM 47 */
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x10059 /* SODIMM 190 */
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059 /* SODIMM 47 */
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059 /* SODIMM 190 */
 			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059 /* SODIMM 192 */
 			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059 /* SODIMM 49 */
 			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059 /* SODIMM 51 */
@@ -498,10 +649,10 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x170b9
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x100b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
 			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
 			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
 			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
@@ -509,31 +660,46 @@
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
 		fsl,pins = <
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x170f9
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x100f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
 		>;
 	};
 
-	pinctrl_usdhc2: usdhc2-grp {
+	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
-			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
-			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
-			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
-			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
-			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
-			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x17059
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17069
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17069
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17069
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17069
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17069
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10069
 
 			MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT	0x10
 		>;
 	};
 
-	pinctrl_wdog: wdog-grp {
+	pinctrl_usdhc2emmc: usdhc2emmcgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
 			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
 		>;
@@ -541,65 +707,65 @@
 };
 
 &iomuxc_snvs {
-	pinctrl_snvs_gpio1: snvs-gpio1-grp {
+	pinctrl_atmel_snvs_conn: atmelsnvsconngrp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x110a0	/* SODIMM 93 */
-			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x110a0	/* SODIMM 95 */
-			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x1b0a0	/* SODIMM 105 */
-			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0a0	/* SODIMM 131 */
-			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x110a0	/* SODIMM 138 */
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04     0xb0a0	/* SODIMM 107 */
 		>;
 	};
 
-	pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */
+	pinctrl_snvs_gpio1: snvsgpio1grp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0xb0a0	/* SODIMM 107 */
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x110a0	/* SODIMM 93 */
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x110a0	/* SODIMM 95 */
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10	0x1b0a0	/* SODIMM 105 */
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0a0	/* SODIMM 131 / USBH_OC */
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x110a0	/* SODIMM 138 */
 		>;
 	};
 
-	pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */
+	pinctrl_snvs_gpio3: snvsgpio3grp { /* Wifi pins */
 		fsl,pins = <
 			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0	/* SODIMM 127 */
 		>;
 	};
 
-	pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */
+	pinctrl_snvs_ad7879_int: snvsad7879intgrp { /* TOUCH Interrupt */
 		fsl,pins = <
 			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x100b0
 		>;
 	};
 
-	pinctrl_snvs_reg_sd: snvs-reg-sd-grp {
+	pinctrl_snvs_reg_sd: snvsregsdgrp {
 		fsl,pins = <
 			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400100b0
 		>;
 	};
 
-	pinctrl_snvs_usbc_det: snvs-usbc-det-grp {
+	pinctrl_snvs_usbc_det: snvsusbcdetgrp {
 		fsl,pins = <
 			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x130b0
 		>;
 	};
 
-	pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp {
+	pinctrl_snvs_gpiokeys: snvsgpiokeysgrp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130a0	/* SODIMM 45 */
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x130a0	/* SODIMM 45 / WAKE_UP */
 		>;
 	};
 
-	pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp {
+	pinctrl_snvs_usdhc1_cd: snvsusdhc1cdgrp {
 		fsl,pins = <
-			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0a0 /* SODIMM 43 */
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0a0 /* SODIMM 43 / MMC_CD */
 		>;
 	};
 
-	pinctrl_snvs_usdhc1_sleep_cd: snvs-usdhc1-cd-grp-slp {
+	pinctrl_snvs_usdhc1_cd_sleep: snvsusdhc1cd-sleepgrp {
 		fsl,pins = <
 			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0
 		>;
 	};
 
-	pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp {
+	pinctrl_snvs_wifi_pdn: snvswifipdngrp {
 		fsl,pins = <
 			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11	0x130a0
 		>;
diff --git a/arch/arm/boot/dts/imx6ull-dhcom-drc02.dts b/arch/arm/boot/dts/imx6ull-dhcom-drc02.dts
new file mode 100644
index 000000000000..b539975a872c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-dhcom-drc02.dts
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ *
+ * DHCOM iMX6ULL variant:
+ * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-SD-RTC-ADC-I-01D2
+ * DHCOR PCB number: 578-200 or newer
+ * DHCOM PCB number: 579-200 or newer
+ * DRC02 PCB number: 568-100 or newer (2nd ethernet by SoM)
+ */
+/dts-v1/;
+
+#include "imx6ull-dhcom-som.dtsi"
+#include "imx6ull-dhcom-som-cfg-sdcard.dtsi"
+
+/ {
+	model = "DH electronics i.MX6ULL DHCOM on DRC02";
+	compatible = "dh,imx6ull-dhcom-drc02", "dh,imx6ull-dhcom-som",
+		     "dh,imx6ull-dhcor-som", "fsl,imx6ull";
+};
+
+/*
+ * The signals for CAN2 TX and RX are routed to the DHCOM UART1 RTS/CTS pins.
+ * Therefore the UART RTS/CTS must be output on other DHCOM pins, see uart1
+ * node below.
+ */
+&can2 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "DRC02-In2",
+		"", "", "", "",
+		"", "", "DHCOM-I", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "DRC02-HW0", "DRC02-HW1", "DHCOM-M",
+		"DRC02-HW2", "DHCOM-U", "DHCOM-T", "DHCOM-S",
+		"DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O",
+		"DHCOM-N", "", "", "";
+	/*
+	 * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
+	 * GPIO line, however the i.MX6ULL UART driver assumes RX happens
+	 * during TX anyway and that it only controls drive enable DE
+	 * line. Hence, the RX is always enabled here.
+	 */
+	rs485-rx-en-hog {
+		gpio-hog;
+		gpios = <25 0>; /* GPIO Q */
+		line-name = "rs485-rx-en";
+		output-low;
+	};
+};
+
+&gpio5 {
+	gpio-line-names =
+		"DHCOM-A", "DHCOM-B", "DHCOM-C", "DRC02-Out2",
+		"DHCOM-E", "", "", "DRC02-Out1",
+		"DRC02-In1", "DHCOM-H", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+/* DHCOM I2C2 */
+&i2c1 {
+	eeprom@56 {
+		compatible = "atmel,24c04";
+		reg = <0x56>;
+		pagesize = <16>;
+	};
+};
+
+&uart1 {
+	/delete-property/ uart-has-rtscts;
+	rts-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */
+	cts-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; /* GPIO M */
+};
+
+/* Use UART as RS485 */
+&uart2 {
+	/delete-property/ uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rts-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* GPIO P */
+};
diff --git a/arch/arm/boot/dts/imx6ull-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6ull-dhcom-pdk2.dts
new file mode 100644
index 000000000000..b29713831a74
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-dhcom-pdk2.dts
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ *
+ * DHCOM iMX6ULL variant:
+ * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-RTC-WBT-ADC-I-01D2
+ * DHCOR PCB number: 578-200 or newer
+ * DHCOM PCB number: 579-200 or newer
+ * PDK2 PCB number: 516-400 or newer
+ */
+/dts-v1/;
+
+#include "imx6ull-dhcom-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX6ULL DHCOM on Premium Developer Kit (2)";
+	compatible = "dh,imx6ull-dhcom-pdk2", "dh,imx6ull-dhcom-som",
+		     "dh,imx6ull-dhcor-som", "fsl,imx6ull";
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	display_bl: display-bl {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
+		default-brightness-level = <8>;
+		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; /* GPIO G */
+		power-supply = <&reg_panel_3v3>;
+		pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* GPIO A */
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			wakeup-source;
+		};
+
+		button-1 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; /* GPIO B */
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			wakeup-source;
+		};
+
+		button-2 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			wakeup-source;
+		};
+
+		button-3 {
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; /* GPIO D */
+			label = "TA4-GPIO-D";
+			linux,code = <KEY_D>;
+			wakeup-source;
+		};
+	};
+
+	led: led {
+		compatible = "gpio-leds";
+
+		/*
+		 * Disable PDK2 LED5, because GPIO E is
+		 * already used as touch interrupt.
+		 */
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <5>; /* PDK2 LED5 */
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; /* GPIO E */
+			status = "disabled";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <6>; /* PDK2 LED6 */
+			gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; /* GPIO F */
+		};
+
+		/*
+		 * Disable PDK2 LED7, because GPIO H is
+		 * already used for WiFi pin WL_REG_ON.
+		 */
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <7>; /* PDK2 LED7 */
+			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* GPIO H */
+			status = "disabled";
+		};
+
+		/*
+		 * Disable PDK2 LED8, because GPIO I is
+		 * already used for BT pin BT_REG_ON.
+		 */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <8>; /* PDK2 LED8 */
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			status = "disabled";
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0edh6";
+		backlight = <&display_bl>;
+		power-supply = <&reg_panel_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	/* Filtered supply voltage */
+	reg_pdk2_24v: regulator-pdk2-24v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <24000000>;
+		regulator-min-microvolt = <24000000>;
+		regulator-name = "24V_PDK2";
+	};
+
+	/* PDK2 U35 */
+	reg_pdk2_3v3: regulator-pdk2-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3V3_PDK2";
+		vin-supply = <&reg_pdk2_24v>;
+	};
+
+	/* 560-200 U1 */
+	reg_panel_3v3: regulator-panel-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3V3_PANEL";
+		vin-supply = <&reg_pdk2_24v>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,name = "sgtl5000";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT";
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			clocks = <&clk_ext_audio_codec>;
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+/* DHCOM I2C1 */
+&i2c2 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		VDDA-supply = <&reg_pdk2_3v3>;
+		VDDIO-supply = <&reg_pdk2_3v3>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+		power-supply = <&reg_panel_3v3>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+
+	port {
+		lcd_display_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-dhcom-picoitx.dts b/arch/arm/boot/dts/imx6ull-dhcom-picoitx.dts
new file mode 100644
index 000000000000..e4cc2223583a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-dhcom-picoitx.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ *
+ * DHCOM iMX6ULL variant:
+ * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-SD-RTC-ADC-I-01D2
+ * DHCOR PCB number: 578-200 or newer
+ * DHCOM PCB number: 579-200 or newer
+ * PicoITX PCB number: 487-600 or newer
+ */
+/dts-v1/;
+
+#include "imx6ull-dhcom-som.dtsi"
+#include "imx6ull-dhcom-som-cfg-sdcard.dtsi"
+
+/ {
+	model = "DH electronics i.MX6ULL DHCOM on PicoITX";
+	compatible = "dh,imx6ull-dhcom-picoitx", "dh,imx6ull-dhcom-som",
+		     "dh,imx6ull-dhcor-som", "fsl,imx6ull";
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_YELLOW>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+		};
+	};
+};
+
+&fec1 {
+	phy-handle = <&mdio1_phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio1_phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-id0007.c0f0", /* SMSC LAN8710Ai */
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			clock-names = "rmii-ref";
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_fec1_phy &pinctrl_snvs_fec1_phy>;
+			pinctrl-names = "default";
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
+		};
+	};
+};
+
+&fec2 {
+	status = "disabled";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "PicoITX-HW2", "PicoITX-HW1", "DHCOM-M",
+		"PicoITX-HW0", "DHCOM-U", "DHCOM-T", "DHCOM-S",
+		"DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O",
+		"DHCOM-N", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"DHCOM-A", "DHCOM-B", "PicoITX-In2", "PicoITX-Out2",
+		"PicoITX-In1", "", "", "PicoITX-Out1",
+		"DHCOM-G", "DHCOM-H", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-dhcom-som-cfg-sdcard.dtsi b/arch/arm/boot/dts/imx6ull-dhcom-som-cfg-sdcard.dtsi
new file mode 100644
index 000000000000..040421f9c970
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-dhcom-som-cfg-sdcard.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ */
+
+/*
+ * Special SoM configuration: SD card
+ *
+ * Enabled:  Micro SD card on module or
+ *           external SD card via DHCOM depends on hardware variant
+ *           GPIO H and GPIO I will be available
+ *           DHCOM UART2 will be available
+ * Disabled: WiFi and BT
+ */
+
+/*
+ * To use usdhc1 as SD card, the WiFi node must be deleted.
+ * BT is also not available, so remove BT from the UART node.
+ */
+/delete-node/ &brcmf;
+/delete-node/ &bluetooth;
+
+/ {
+	aliases {
+		mmc1 = &usdhc1;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+	};
+};
+
+/* Micro SD card on module or external SD card via DHCOM */
+&usdhc1 {
+	/delete-property/ #address-cells;
+	/delete-property/ #size-cells;
+	/delete-property/ keep-power-in-suspend;
+	/delete-property/ mmc-pwrseq;
+	/delete-property/ non-removable;
+	/delete-property/ wakeup-source;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x120b0 /* SD1 CD */
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x120b0 /* SD1 CD */
+
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x120b0 /* SD1 CD */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi b/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi
new file mode 100644
index 000000000000..17837663c0b0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-dhcom-som.dtsi
@@ -0,0 +1,633 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ */
+
+#include "imx6ull-dhcor-som.dtsi"
+
+/ {
+	aliases {
+		/delete-property/ mmc0; /* Avoid double definitions */
+		/delete-property/ mmc1;
+		/delete-property/ spi2;
+		/delete-property/ spi3;
+		i2c0 = &i2c2;
+		i2c1 = &i2c1;
+		mmc2 = &usdhc2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+		serial0 = &uart1;
+		serial1 = &uart6; /* DHCOM UART2, special hardware required */
+		serial2 = &uart3;
+		serial3 = &uart2; /* Use BT UART always as ttymxc3 */
+		serial4 = &uart4;
+		serial5 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi4; /* DHCOM SPI2, special hardware required */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_ext_3v3_ref: regulator-ext-3v3-ref {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC_3V3_REF";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-otg1-vbus";
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-otg2-vbus";
+	};
+
+	/* SoM with WiFi/BT: WiFi pin WL_REG_ON is connected to a DHCOM GPIO */
+	/omit-if-no-ref/ usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; /* GPIO H */
+	};
+};
+
+/* SoM with WiFi/BT: BT pin BT_REG_ON is connected to a DHCOM GPIO */
+&bluetooth {
+	shutdown-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; /* GPIO I */
+};
+
+&can1 {
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/*
+ * The signals for CAN2 TX and RX are routed to the DHCOM UART1 RTS/CTS pins.
+ * Only if this pins are used as CAN interface enable it on board layer.
+ */
+&can2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+};
+
+/* DHCOM SPI1 */
+&ecspi1 {
+	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/*
+ * DHCOM SPI2
+ * Special hardware required that uses the pins of FEC2. Therefore this SPI
+ * interface can only be used if FEC2 is disabled.
+ */
+&ecspi4 {
+	cs-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	pinctrl-names = "default";
+};
+
+/* DHCOM ETH1 */
+&fec1 {
+	phy-handle = <&mdio2_phy0>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* DHCOM ETH2 */
+&fec2 {
+	phy-handle = <&mdio2_phy1>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_fec2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio2_phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-id0007.c0f0", /* SMSC LAN8710Ai */
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			clock-names = "rmii-ref";
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_fec1_phy &pinctrl_snvs_fec1_phy>;
+			pinctrl-names = "default";
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
+		};
+
+		mdio2_phy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id0007.c0f0", /* SMSC LAN8710Ai */
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			clock-names = "rmii-ref";
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_fec2_phy &pinctrl_snvs_fec2_phy>;
+			pinctrl-names = "default";
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "DHCOM-INT",
+		"", "", "", "",
+		"", "", "DHCOM-I", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+	pinctrl-0 = <&pinctrl_spi1_switch
+		     &pinctrl_dhcom_i &pinctrl_dhcom_int>;
+	pinctrl-names = "default";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "DHCOM-L", "DHCOM-K", "DHCOM-M",
+		"DHCOM-J", "DHCOM-U", "DHCOM-T", "DHCOM-S",
+		"DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O",
+		"DHCOM-N", "", "", "";
+	pinctrl-0 = <&pinctrl_dhcom_j &pinctrl_dhcom_k
+		     &pinctrl_dhcom_l &pinctrl_dhcom_m
+		     &pinctrl_dhcom_n &pinctrl_dhcom_o
+		     &pinctrl_dhcom_p &pinctrl_dhcom_q
+		     &pinctrl_dhcom_r &pinctrl_dhcom_s
+		     &pinctrl_dhcom_t &pinctrl_dhcom_u>;
+	pinctrl-names = "default";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"DHCOM-A", "DHCOM-B", "DHCOM-C", "DHCOM-D",
+		"DHCOM-E", "", "", "DHCOM-F",
+		"DHCOM-G", "DHCOM-H", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+	pinctrl-0 = <&pinctrl_snvs_dhcom_a &pinctrl_snvs_dhcom_b
+		     &pinctrl_snvs_dhcom_c &pinctrl_snvs_dhcom_d
+		     &pinctrl_snvs_dhcom_e &pinctrl_snvs_dhcom_f
+		     &pinctrl_snvs_dhcom_g &pinctrl_snvs_dhcom_h>;
+	pinctrl-names = "default";
+};
+
+/* DHCOM I2C2 */
+&i2c1 {
+	rtc_i2c: rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	/* Microchip 24AA025E48T-I/OT containing MAC for DHCOM ETH1 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	/* TI ADC101C027 */
+	adc@51 {
+		compatible = "ti,adc101c";
+		reg = <0x51>;
+		vref-supply = <&reg_ext_3v3_ref>;
+	};
+
+	/* TI ADC101C027 */
+	adc@52 {
+		compatible = "ti,adc101c";
+		reg = <0x52>;
+		vref-supply = <&reg_ext_3v3_ref>;
+	};
+
+	/* Microchip 24AA025E48T-I/OT containing MAC for DHCOM ETH2 */
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
+
+/* DHCOM I2C1 */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-0 = <&pinctrl_lcdif>;
+	pinctrl-names = "default";
+};
+
+&pwm1 {
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+};
+
+&sai2 {
+	assigned-clock-rates = <320000000>;
+	assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>;
+	pinctrl-0 = <&pinctrl_sai2>;
+	pinctrl-names = "default";
+};
+
+&tsc {
+	measure-delay-time = <0xffff>;
+	pinctrl-0 = <&pinctrl_tsc>;
+	pinctrl-names = "default";
+	pre-charge-time = <0xfff>;
+	touchscreen-average-samples = <32>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+};
+
+/* DHCOM UART1 */
+&uart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/*
+ * DHCOM UART2 (alternative)
+ * Special hardware required that uses DHCOM GPIO pins for DHCOM UART2.
+ * Therefore this UART interface can only be used if DHCOM GPIOs J/K/L/M are
+ * removed from GPIO hog muxing.
+ */
+&uart6 {
+	pinctrl-0 = <&pinctrl_uart6>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&usbotg1 {
+	adp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	hnp-disable;
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	pinctrl-names = "default";
+	srp-disable;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current; /* Overcurrent pin is used for TSC */
+	dr_mode = "host";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	pinctrl-names = "default";
+	tpl-support;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+/* WiFi on LGA */
+&usdhc1 {
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+};
+
+/* eMMC on module */
+&usdhc2 {
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	/* DHCOM GPIOs I..U + INT_HIGHEST_PRIORITY */
+	pinctrl_dhcom_i: dhcom-i-grp {
+		fsl,pins = <MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x400120b0>;
+	};
+
+	pinctrl_dhcom_j: dhcom-j-grp {
+		fsl,pins = <MX6UL_PAD_CSI_HSYNC__GPIO4_IO20	0x400120b0>;
+	};
+
+	pinctrl_dhcom_k: dhcom-k-grp {
+		fsl,pins = <MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18	0x400120b0>;
+	};
+
+	pinctrl_dhcom_l: dhcom-l-grp {
+		fsl,pins = <MX6UL_PAD_CSI_MCLK__GPIO4_IO17	0x400120b0>;
+	};
+
+	pinctrl_dhcom_m: dhcom-m-grp {
+		fsl,pins = <MX6UL_PAD_CSI_VSYNC__GPIO4_IO19	0x400120b0>;
+	};
+
+	pinctrl_dhcom_n: dhcom-n-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x400120b0>;
+	};
+
+	pinctrl_dhcom_o: dhcom-o-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x400120b0>;
+	};
+
+	pinctrl_dhcom_p: dhcom-p-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x400120b0>;
+	};
+
+	pinctrl_dhcom_q: dhcom-q-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x400120b0>;
+	};
+
+	pinctrl_dhcom_r: dhcom-r-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA03__GPIO4_IO24	0x400120b0>;
+	};
+
+	pinctrl_dhcom_s: dhcom-s-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x400120b0>;
+	};
+
+	pinctrl_dhcom_t: dhcom-t-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x400120b0>;
+	};
+
+	pinctrl_dhcom_u: dhcom-u-grp {
+		fsl,pins = <MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x400120b0>;
+	};
+
+	pinctrl_dhcom_int: dhcom-int-grp {
+		fsl,pins = <MX6UL_PAD_JTAG_TMS__GPIO1_IO11	0x400120b0>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100b1
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x100b1
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x100b1
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x1b0b0 /* SS0 */
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4-grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO	0x100b1
+			MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI	0x100b1
+			MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK	0x100b1
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0 /* SS0 */
+		>;
+	};
+
+	pinctrl_fec1: fec1-grp {
+		fsl,pins = <
+			/* FEC1 uses MDIO bus from FEC2 */
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
+		>;
+	};
+
+	pinctrl_fec1_phy: fec1-phy-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23	0xb0 /* SMSC PHY reset */
+		>;
+	};
+
+	pinctrl_fec2: fec2-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
+		>;
+	};
+
+	pinctrl_fec2_phy: fec2-phy-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24	0xb0 /* SMSC PHY reset */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31	0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif: lcdif-grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__PWM1_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_sai2: sai2-grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x130b0
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x120b0
+		>;
+	};
+
+	pinctrl_tsc: tsc-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart6: uart6-grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
+			MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS	0x1b0b1
+			MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x120b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B	0x17059 /* SD2 Reset */
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	/* DHCOM GPIOs A..H */
+	pinctrl_snvs_dhcom_a: snvs-dhcom-a-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_b: snvs-dhcom-b-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_c: snvs-dhcom-c-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_d: snvs-dhcom-d-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_e: snvs-dhcom-e-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_f: snvs-dhcom-f-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_g: snvs-dhcom-g-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x400120b0>;
+	};
+
+	pinctrl_snvs_dhcom_h: snvs-dhcom-h-grp {
+		fsl,pins = <MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x400120b0>;
+	};
+
+	pinctrl_snvs_fec1_phy: snvs-fec1-phy-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0xb1 /* SMSC PHY Int */
+		>;
+	};
+
+	pinctrl_snvs_fec2_phy: snvs-fec2-phy-grp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0xb1 /* SMSC PHY Int */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi
new file mode 100644
index 000000000000..5882c7565f64
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2023 DH electronics GmbH
+ */
+
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx6ull.dtsi"
+
+/ {
+	memory@80000000 {
+		/* Appropriate memory size will be filled by U-Boot */
+		reg = <0x80000000 0>;
+		device_type = "memory";
+	};
+};
+
+&cpu0 {
+	/*
+	 * Due to the design as a solderable SOM, there are no capacitors
+	 * below the SoC, therefore higher voltages are required.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		900000	1275000
+		792000	1250000 /* Voltage increased */
+		528000	1175000
+		396000	1025000
+		198000	950000
+	>;
+	fsl,soc-operating-points = <
+		/* KHz	uV */
+		900000	1250000
+		792000	1250000 /* Voltage increased */
+		528000	1175000
+		396000	1175000
+		198000	1175000
+	>;
+};
+
+&gpio1 {
+	pinctrl-0 = <&pinctrl_spi1_switch>;
+	pinctrl-names = "default";
+	/*
+	 * Pin SPI_BOOT_FLASH_EN (GPIO 1.9) is a switch for either using the
+	 * DHCOM SPI1 interface or accessing the SPI bootflash. Both using
+	 * ecspi1, but muxed to different pins. The DHCOM SPI1 interface uses
+	 * the pins PAD_LCD_DATA21..23 and the SPI bootflash uses the pins
+	 * PAD_CSI_DATA04..07. If the SPI bootflash is enabled the pins for
+	 * DHCOM GPIOs N/O/P/Q/R/S/T/U aren't usable anymore, because they
+	 * are used for the bus interface to the SPI bootflash. The GPIOs are
+	 * disconnected by a buffer which is also controlled via the pin
+	 * SPI_BOOT_FLASH_EN. Therefore the access to the bootflash is a
+	 * special case and is disabled by setting GPIO 1.9 to high.
+	 */
+	spi1-switch-hog {
+		gpio-hog;
+		gpios = <9 0>;
+		output-high;
+		line-name = "spi1-switch";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9061";
+		reg = <0x58>;
+
+		onkey {
+			compatible = "dlg,da9061-onkey", "dlg,da9062-onkey";
+			status = "disabled";
+		};
+
+		regulators {
+			vdd_soc_in_1v4: buck1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1400000>;
+				regulator-min-microvolt = <1400000>;
+				regulator-name = "vdd_soc_in_1v4";
+			};
+
+			vcc_3v3: buck2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_3v3";
+			};
+
+			/*
+			 * The current DRR3 memory can be supplied with a
+			 * voltage of either 1.35V or 1.5V. For reasons of
+			 * backward compatibility to only 1.5V DDR3 memory,
+			 * the voltage is set to 1.5V.
+			 */
+			vcc_ddr_1v35: buck3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1500000>;
+				regulator-min-microvolt = <1500000>;
+				regulator-name = "vcc_ddr_1v35";
+			};
+
+			vcc_2v5: ldo1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2500000>;
+				regulator-min-microvolt = <2500000>;
+				regulator-name = "vcc_2v5";
+			};
+
+			vdd_snvs_in_3v3: ldo2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vdd_snvs_in_3v3";
+			};
+
+			vcc_1v8: ldo3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+			};
+
+			vcc_1v2: ldo4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1200000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-name = "vcc_1v2";
+			};
+		};
+
+		thermal {
+			compatible = "dlg,da9061-thermal", "dlg,da9062-thermal";
+			status = "disabled";
+		};
+
+		watchdog {
+			compatible = "dlg,da9061-watchdog", "dlg,da9062-watchdog";
+			status = "disabled";
+		};
+	};
+};
+
+&ocotp {
+	/* Don't get write access by default */
+	read-only;
+};
+
+&reg_arm {
+	vin-supply = <&vdd_soc_in_1v4>;
+};
+
+&reg_soc {
+	vin-supply = <&vdd_soc_in_1v4>;
+};
+
+/* BT on LGA (BT_REG_ON is connected to LGA pin E1) */
+&uart2 {
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	/*
+	 * Actually, the maximum speed of the chip is 4MBdps, but there are
+	 * limitations that prevent this speed. It hasn't yet been figured out
+	 * what the reason for this is. Currently, the maximum speed of 3MBdps
+	 * can be used without any problems. If the limitation can be overcome,
+	 * the speed can be increased accordingly.
+	 */
+	bluetooth: bluetooth {
+		compatible = "brcm,bcm43430a1-bt"; /* muRata 1DX */
+		max-speed = <3000000>;
+		vbat-supply = <&vcc_3v3>;
+		vddio-supply = <&vcc_3v3>;
+	};
+};
+
+/* WiFi on LGA (WL_REG_ON is connected to LGA pin E3) */
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	pinctrl-0 = <&pinctrl_usdhc1_wifi>;
+	pinctrl-names = "default";
+	wakeup-source;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac"; /* muRata 1DX */
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x4001b8b0
+		>;
+	};
+
+	pinctrl_spi1_switch: spi1-switch-grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x120b0 /* SPI_BOOT_FLASH_EN */
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1_wifi: usdhc1-wifi-grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x1b0b0
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10010
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x1b0b0
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x1b0b0
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x1b0b0
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-jozacp.dts b/arch/arm/boot/dts/imx6ull-jozacp.dts
new file mode 100644
index 000000000000..a152eeb78e88
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-jozacp.dts
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2020 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6ull.dtsi"
+
+/ {
+	model = "JOZ Access Point";
+	compatible = "joz,jozacp", "fsl,imx6ull";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* On board name LED_RGB1 */
+	led-controller-1 {
+		compatible = "pwm-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			pwms = <&pwm1 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			pwms = <&pwm3 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+			pwms = <&pwm5 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* On board name LED_RGB2 */
+	led-controller-2 {
+		compatible = "pwm-leds";
+
+		led-3 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+			pwms = <&pwm2 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <4>;
+			pwms = <&pwm4 0 10000000 0>;
+			max-brightness = <255>;
+		};
+
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <5>;
+			pwms = <&pwm6 0 10000000 0>;
+			max-brightness = <255>;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_5v0>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vbus>;
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v0>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&cpu0 {
+	clock-frequency = <792000000>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			interrupts-extended = <&gpio1 29 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&pwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm5>;
+	status = "okay";
+};
+
+&pwm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm6>;
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	dtr-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	vbus-supply = <&reg_vbus>;
+	dr_mode = "host";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&reg_3v3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	cap-mmc-hw-reset;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	no-sd;
+	non-removable;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC	 0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+
+			MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28	0x038b0
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x170b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* HW Revision */
+			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x1b0b0
+
+			/* HW ID */
+			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0
+
+			/* Digital inputs */
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x11000
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x11000
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x11000
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x11000
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x11000
+
+			/* Isolated outputs */
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x01020
+			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21	0x01020
+			MX6UL_PAD_UART2_RTS_B__GPIO1_IO23	0x01020
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x01020
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x01020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001f8b1
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001f8b1
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001f8b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__PWM1_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA01__PWM2_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA02__PWM3_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA03__PWM4_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm5: pwm5grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA18__PWM5_OUT		0x01010
+		>;
+	};
+
+	pinctrl_pwm6: pwm6grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA19__PWM6_OUT		0x01010
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b0
+			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b0
+			MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS	0x1b0b0
+			MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS	0x1b0b0
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B	0x17099
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x1f099
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10099
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17099
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17099
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17099
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17099
+			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17099
+			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17099
+			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17099
+			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17099
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x100b9
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x170b9
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_vbus: vbus0grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x030b0
+		>;
+	};
+
+	pinctrl_wifi_npd: wifigrp {
+		fsl,pins = <
+			/* WL_REG_ON */
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x03020
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_snvs_hog>;
+
+	pinctrl_snvs_hog: snvs-hog-grp {
+		fsl,pins = <
+			/* Digital outputs */
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x00020
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x00020
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x00020
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x00020
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x00020
+
+			/* Digital outputs fault feedback */
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17000
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17000
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x17000
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x17000
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x17000
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-kontron-bl.dts b/arch/arm/boot/dts/imx6ull-kontron-bl.dts
new file mode 100644
index 000000000000..fa016465cdbc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-kontron-bl.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2019 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx6ull-kontron-sl.dtsi"
+#include "imx6ul-kontron-bl-common.dtsi"
+
+/ {
+	model = "Kontron BL i.MX6ULL (N641X S)";
+	compatible = "kontron,bl-imx6ull", "kontron,sl-imx6ull", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts b/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts
deleted file mode 100644
index 57588a5e1e34..000000000000
--- a/arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2019 Kontron Electronics GmbH
- */
-
-/dts-v1/;
-
-#include "imx6ull-kontron-n6411-som.dtsi"
-#include "imx6ul-kontron-n6x1x-s.dtsi"
-
-/ {
-	model = "Kontron N6411 S";
-	compatible = "kontron,imx6ull-n6411-s", "kontron,imx6ull-n6411-som",
-		     "fsl,imx6ull";
-};
diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
deleted file mode 100644
index b7e984284e1a..000000000000
--- a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 exceet electronics GmbH
- * Copyright (C) 2018 Kontron Electronics GmbH
- */
-
-#include "imx6ull.dtsi"
-#include "imx6ul-kontron-n6x1x-som-common.dtsi"
-
-/ {
-	model = "Kontron N6411 SOM";
-	compatible = "kontron,imx6ull-n6311-som", "fsl,imx6ull";
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-		device_type = "memory";
-	};
-};
-
-&qspi {
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spi-nand";
-		spi-max-frequency = <104000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		reg = <0>;
-
-		partition@0 {
-			label = "ubi1";
-			reg = <0x00000000 0x08000000>;
-		};
-
-		partition@8000000 {
-			label = "ubi2";
-			reg = <0x08000000 0x18000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ull-kontron-sl.dtsi b/arch/arm/boot/dts/imx6ull-kontron-sl.dtsi
new file mode 100644
index 000000000000..93f10eb3494f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-kontron-sl.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-kontron-sl-common.dtsi"
+
+/ {
+	model = "Kontron SL i.MX6ULL (N641X SOM)";
+	compatible = "kontron,sl-imx6ull", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
index ecbb2cc5b9ab..79cc45728cd2 100644
--- a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
+++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
@@ -14,5 +14,6 @@
 };
 
 &gpmi {
+	fsl,use-minimum-ecc;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
index c8d3eff9ed4b..1d7362b5ac91 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
@@ -10,6 +10,7 @@
 #include "imx6ull-phytec-segin.dtsi"
 #include "imx6ull-phytec-segin-peb-eval-01.dtsi"
 #include "imx6ull-phytec-segin-peb-av-02.dtsi"
+#include "imx6ull-phytec-segin-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with NAND";
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
index e168494e0a6d..4bcbae024d8d 100644
--- a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
@@ -9,6 +9,7 @@
 #include "imx6ull-phytec-phycore-som.dtsi"
 #include "imx6ull-phytec-segin.dtsi"
 #include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+#include "imx6ull-phytec-segin-peb-wlbt-05.dtsi"
 
 / {
 	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Low Cost with NAND";
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi
new file mode 100644
index 000000000000..df25814a3371
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-wlbt-05.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Yunus Bas <y.bas@phytec.de>
+ */
+
+#include "imx6ul-phytec-segin-peb-wlbt-05.dtsi"
+
+&iomuxc {
+	/delete-node/ wlgrp;
+};
+
+&iomuxc_snvs {
+	pinctrl_wl: wlgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x3031
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts
new file mode 100644
index 000000000000..14adb87da911
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Alexander Bauer <a.bauer@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull-phytec-tauri.dtsi"
+
+/ {
+	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
+	compatible = "phytec,imx6ull-phygate-tauri",
+		     "phytec,imx6ull-phygate-tauri-emmc",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+/* EMMC-Version */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts
new file mode 100644
index 000000000000..ae396ac63443
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Alexander Bauer <a.bauer@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull-phytec-tauri.dtsi"
+
+/ {
+	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
+	compatible = "phytec,imx6ull-phygate-tauri",
+		     "phytec,imx6ull-phygate-tauri-nand",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+/* NAND-Version */
+&gpmi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi
new file mode 100644
index 000000000000..5464a52a1f94
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi
@@ -0,0 +1,588 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Alexander Bauer <a.bauer@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+
+/ {
+
+	model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
+	compatible = "phytec,imx6ull-phygate-tauri",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+
+	aliases {
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-key";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key {
+			label = "KEY-A";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_A>;
+			wakeup-source;
+		};
+	};
+
+	reg_adc1_vref_3v3: regulator-vref-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_s25fl064_hold: regulator-s25fl064-hold {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_s25fl064_hold>;
+		compatible = "regulator-fixed";
+		regulator-name = "s25fl064_hold";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb_hub_vbus: regulator-hub-otg1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhubpwr>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_hub_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1pwr>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	user_leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>,
+			    <&pinctrl_user_leds_snvs>;
+
+		user-led1 {
+			label = "yellow";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "off";
+		};
+
+		user-led2 {
+			label = "red";
+			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "off";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>,
+		    <&pinctrl_ecspi1_cs>;
+	cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>,
+		   <&gpio3 10 GPIO_ACTIVE_LOW>,
+		   <&gpio3 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm_tis: tpm@1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		compatible = "tcg,tpm_tis-spi";
+		reg = <1>;
+		spi-max-frequency = <20000000>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	s25fl064: flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = " jedec,spi-nor";
+		reg = <2>;
+		spi-max-frequency = <40000000>;
+		m25p,fast-read;
+		status = "disabled";
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	dmas = <&sdma 7 8 0>,
+	       <&sdma 8 8 0>;
+	dma-names = "rx", "tx";
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp102: tmp@49 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tempsense>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	i2c_rtc: rtc@68 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	sda-gpios = <&gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&mdio {
+	ethphy2: ethernet-phy@2 {
+		reg = <2>;
+		micrel,led-mode = <1>;
+		clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+		clock-names = "rmii-ref";
+		status = "okay";
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm6>;
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* UART4 * RS485  */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* UART5 * RS232  */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart7>;
+	status = "okay";
+};
+
+/* USB */
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_hub_vbus>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "disabled";
+};
+
+&iomuxc_snvs {
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+
+	pinctrl_tempsense: tempsensegrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x17059
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
+		>;
+	};
+
+	pinctrl_usbhubpwr: usbhubpwrgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x17059
+		>;
+	};
+
+	pinctrl_user_leds_snvs: user_ledsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x79
+		>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x17059  /* nUART_MUX_RS232 */
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25	0x17059  /* nUART_MUX_DUAL_RX_TX */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x79
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x100b1
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x100b1
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x100b1
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK	0x100b1
+			MX6UL_PAD_LCD_DATA23__ECSPI1_MISO	0x100b1
+			MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26	0x10b0
+			MX6UL_PAD_LCD_DATA05__GPIO3_IO10	0x10b0
+			MX6UL_PAD_LCD_DATA06__GPIO3_IO11	0x10b0
+		>;
+	};
+
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX	0x0b0b0
+			MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX	0x0b0b0
+		>;
+	};
+
+	princtrl_flexcan2_en: flexcan2engrp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x17059
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL	0xb0
+			MX6UL_PAD_GPIO1_IO01__I2C2_SDA	0xb0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00	0xb0
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA01__I2C3_SCL	0xb0
+			MX6UL_PAD_LCD_DATA00__I2C3_SDA	0xb0
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA01__GPIO3_IO06	0xb0
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05	0xb0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA03__I2C4_SCL	0xb0
+			MX6UL_PAD_LCD_DATA02__I2C4_SDA	0xb0
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA03__GPIO3_IO08	0xb0
+			MX6UL_PAD_LCD_DATA02__GPIO3_IO07	0xb0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__PWM3_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm6: pwm6grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__PWM6_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__PWM7_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TRST_B__PWM8_OUT	0x0b0b0
+		>;
+	};
+
+	pinctrl_s25fl064_hold: s25fl064holdgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA12__GPIO3_IO17	0x100b1
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b1
+			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b1
+			MX6UL_PAD_LCD_HSYNC__GPIO3_IO02	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart7: uart7grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA16__UART7_DCE_TX	0x1b0b1
+			MX6UL_PAD_LCD_DATA17__UART7_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27	0x80
+		>;
+	};
+
+	pinctrl_usbotg1pwr: usbotg1pwrgrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_user_leds: userledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x79
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-pinfunc.h b/arch/arm/boot/dts/imx6ull-pinfunc.h
index eb025a9d4759..7328d4ef8559 100644
--- a/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ b/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -82,6 +82,6 @@
 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0                           0x0200 0x048C 0x0000 0x9 0x0
 
 #endif /* __DTS_IMX6ULL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi b/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi
new file mode 100644
index 000000000000..3fdece5bd31f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi
@@ -0,0 +1,852 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx6ull.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &usdhc2; /* eMMC */
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&pinctrl_emmc_rst>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_dcdc_3v3: regulator-dcdc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "dcdc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "ldo-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_status_leds>;
+
+		led-1 {
+			function = LED_FUNCTION_BOOT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_PROGRAMMING;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_motor
+		     &pinctrl_adc_cp
+		     &pinctrl_adc_pp>;
+	vref-supply = <&vgen1_reg>;
+	status = "okay";
+};
+
+&cpu0 {
+	clock-frequency = <792000000>;
+};
+
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	num-cs = <3>;
+	cs-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH
+		    &gpio3 2  GPIO_ACTIVE_HIGH
+		    &gpio3 4  GPIO_ACTIVE_HIGH>;
+};
+
+&ecspi4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	num-cs = <1>;
+	cs-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1
+		     &pinctrl_enet1_phy_rst
+		     &pinctrl_enet_mdio>;
+	phy-supply = <&reg_dcdc_3v3>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-handle = <&ethphy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet1_phy_int>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+			interrupts-extended = <&gpio2 7 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+			max-speed = <100>;
+			smsc,disable-energy-detect;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "",				/* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 5 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 10 */
+			  "",
+			  "",
+			  "CP_INVERT",
+			  "",
+			  "",				/* 15 */
+			  "",
+			  "",
+			  "",
+			  "MOTOR_1_FAULT_N",
+			  "",				/* 20 */
+			  "",
+			  "ROTARY_SWITCH_1_2_N",
+			  "ROTARY_SWITCH_1_4_N",
+			  "ROTARY_SWITCH_1_8_N",
+			  "MOTOR_2_FAULT_N";		/* 25 */
+};
+
+&gpio3 {
+	gpio-line-names = "",				/* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 5 */
+			  "EXT_GPIO",
+			  "MOTOR_1_DRIVER_IN1_N",
+			  "MOTOR_1_DRIVER_IN2",
+			  "MOTOR_2_DRIVER_IN1",
+			  "STM32_BOOT0",		/* 10 */
+			  "STM32_RST_N",
+			  "RELAY_1_ENABLE",
+			  "RELAY_2_ENABLE",
+			  "",
+			  "",				/* 15 */
+			  "QCA700X_MAINS_BOOTLOADER_N",
+			  "QCA700X_CP_RST_N",
+			  "QCA700X_CP_BOOTLOADER_N",
+			  "",
+			  "DIGITAL_OUT_1",		/* 20 */
+			  "DIGITAL_OUT_2",
+			  "DIGITAL_OUT_3",
+			  "DIGITAL_OUT_4",
+			  "DIGITAL_OUT_5",
+			  "DIGITAL_OUT_6",		/* 25 */
+			  "ROTARY_SWITCH_2_8_N",
+			  "ROTARY_SWITCH_2_4_N",
+			  "ROTARY_SWITCH_2_2_N";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pmic>;
+
+	gpio-line-names = "",				/* 0 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 5 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",				/* 10 */
+			  "",
+			  "",
+			  "BOARD_VARIANT_1",
+			  "BOARD_VARIANT_2",
+			  "BOARD_VARIANT_0",		/* 15 */
+			  "BOARD_VARIANT_3",
+			  "",
+			  "ROTARY_SWITCH_2_1_N",
+			  "",
+			  "DIGITAL_IN_5",		/* 20 */
+			  "",
+			  "",
+			  "DIGITAL_IN_6",
+			  "",
+			  "DIGITAL_IN_1",		/* 25 */
+			  "DIGITAL_IN_2",
+			  "DIGITAL_IN_4",
+			  "DIGITAL_IN_3";
+
+	pmic-int-hog {
+		gpio-hog;
+		gpios = <19 0>;
+		input;
+	};
+};
+
+&gpio5 {
+	gpio-line-names = "ROTARY_SWITCH_1_1_N",	/* 0 */
+			  "",
+			  "RELAY_2_SENSE",
+			  "RELAY_1_SENSE",
+			  "",
+			  "",				/* 5 */
+			  "",
+			  "QCA700X_MAINS_RST_N",
+			  "MOTOR_2_DRIVER_IN2",
+			  "",
+			  "CP_POSITIVE_PEAK_RST",	/* 10 */
+			  "CP_NEGATIVE_PEAK_RST";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pfuze3001: pmic@8 {
+		compatible = "fsl,pfuze3001";
+		reg = <0x08>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-name = "SW1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-name = "SW2";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-name = "SW3";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-name = "VSNVS";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-name = "VLDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-name = "VLDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-name = "VCCSD";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-name = "V33";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-name = "VLDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-name = "VLDO4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	onewire@18 {
+		compatible = "maxim,ds2484";
+		reg = <0x18>;
+	};
+
+	accelerometer@19 {
+		compatible = "st,iis328dq", "st,h3lis331dl-accel";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accelerometer_int1_snvs>;
+		vdd-supply = <&reg_dcdc_3v3>;
+		vddio-supply = <&reg_dcdc_3v3>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_var
+		     &pinctrl_digital_input
+		     &pinctrl_digital_output
+		     &pinctrl_gpio_motor
+		     &pinctrl_hog_pins
+		     &pinctrl_rotary_switch1
+		     &pinctrl_rotary_switch2>;
+
+	pinctrl_adc_cp: adc-cpgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02            0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03            0xb0
+		>;
+	};
+
+	pinctrl_adc_motor: adc-motorgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__GPIO1_IO00            0xb0
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01            0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04            0xb0
+		>;
+	};
+
+	pinctrl_adc_pp: adc-ppgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05            0xb0
+		>;
+	};
+
+	pinctrl_board_var: board-vargrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__GPIO4_IO15              0xb0
+			MX6UL_PAD_NAND_CE0_B__GPIO4_IO13            0xb0
+			MX6UL_PAD_NAND_CE1_B__GPIO4_IO14            0xb0
+			MX6UL_PAD_NAND_DQS__GPIO4_IO16              0xb0
+		>;
+	};
+
+	pinctrl_digital_input: digital-inputgrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA04__GPIO4_IO25            0xb0
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26            0xb0
+			MX6UL_PAD_CSI_DATA07__GPIO4_IO28            0xb0
+			MX6UL_PAD_CSI_DATA06__GPIO4_IO27            0xb0
+			MX6UL_PAD_CSI_HSYNC__GPIO4_IO20             0xb0
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23            0xb0
+		>;
+	};
+
+	pinctrl_digital_output: digital-outputgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA15__GPIO3_IO20            0x400000b0
+			MX6UL_PAD_LCD_DATA16__GPIO3_IO21            0x400000b0
+			MX6UL_PAD_LCD_DATA17__GPIO3_IO22            0x400000b0
+			MX6UL_PAD_LCD_DATA18__GPIO3_IO23            0x400000b0
+			MX6UL_PAD_LCD_DATA19__GPIO3_IO24            0x400000b0
+			MX6UL_PAD_LCD_DATA20__GPIO3_IO25            0x400000b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29         0x10b0
+			MX6UL_PAD_LCD_HSYNC__GPIO3_IO02             0xb0
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04             0xb0
+			MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK        0x10b0
+			MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO        0x10b0
+			MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI        0x10b0
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15           0x10b0
+			MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK       0x10b0
+			MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO         0x10b0
+			MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI          0x10b0
+		>;
+	};
+
+	pinctrl_emmc_rst: emmc-rstgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10              0x400010b0
+		>;
+	};
+
+	pinctrl_enet_mdio: enet-mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO            0x10b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC             0x10b0
+		>;
+	};
+
+	pinctrl_enet1_phy_int: enet1-phy-intgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07           0x10b0
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00     0x100b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01     0x100b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN          0x100b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1      0x400000b1
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00     0xb0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01     0xb0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN          0xb0
+		>;
+	};
+
+	pinctrl_ext_uart: ext-uartgrp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX      0xb0
+			MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX         0xb0
+		>;
+	};
+
+	pinctrl_fan_enable: fan-enablegrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__GPIO3_IO05            0x400000b0
+		>;
+	};
+
+	pinctrl_gpio_motor: gpio-motorgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA02__GPIO3_IO07            0x400000b0
+			MX6UL_PAD_LCD_DATA03__GPIO3_IO08            0x400000b0
+			MX6UL_PAD_LCD_DATA04__GPIO3_IO09            0x400000b0
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19           0xb0
+			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25         0xb0
+		>;
+	};
+
+	pinctrl_hog_pins: hog-pinsgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA07__GPIO3_IO12            0x400000b0
+			MX6UL_PAD_LCD_DATA08__GPIO3_IO13            0x400000b0
+			MX6UL_PAD_JTAG_TDI__GPIO1_IO13              0x400070a0
+			MX6UL_PAD_LCD_DATA05__GPIO3_IO10            0x400000b0
+			MX6UL_PAD_LCD_DATA06__GPIO3_IO11            0x400000b0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA           0x400008b0
+			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL           0x400008b0
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4-gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21         0x400008b0
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20         0x400008b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT        0x70b1
+			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19             0xb0
+		>;
+	};
+
+	pinctrl_pwm_cp: pinctrl-pwm-cpgrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TRST_B__PWM8_OUT             0x60a0
+		>;
+	};
+
+	pinctrl_pwm_digital_input_ref: pwm-digital-input-refgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__PWM2_OUT              0xb0
+		>;
+	};
+
+	pinctrl_pwm_fan: pwm-fangrp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TCK__PWM7_OUT                0x60a0
+		>;
+	};
+
+	pinctrl_qca700x_cp_btld: qca700x-cp-btldgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA13__GPIO3_IO18            0x400000b0
+		>;
+	};
+
+	pinctrl_qca700x_cp_int: qca700x-cp-intgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_DATA1__GPIO2_IO19             0x10b0
+		>;
+	};
+
+	pinctrl_qca700x_cp_rst: qca700x-cp-rstgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA12__GPIO3_IO17            0x400000b0
+		>;
+	};
+
+	pinctrl_qca700x_mains_btld: qca700x-mains-btldgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA11__GPIO3_IO16            0x400000b0
+		>;
+	};
+
+	pinctrl_rotary_switch1: rotary-switch1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_CTS_B__GPIO1_IO22           0xb0
+			MX6UL_PAD_UART2_RTS_B__GPIO1_IO23           0xb0
+			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24         0xb0
+		>;
+	};
+
+	pinctrl_rotary_switch2: rotary-switch2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18            0xb0
+			MX6UL_PAD_LCD_DATA23__GPIO3_IO28            0xb0
+			MX6UL_PAD_LCD_DATA22__GPIO3_IO27            0xb0
+			MX6UL_PAD_LCD_DATA21__GPIO3_IO26            0xb0
+		>;
+	};
+
+	pinctrl_rs485_1: rs485-1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18           0xb0
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX       0xb0
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX       0xb0
+		>;
+	};
+
+	pinctrl_rs485_2: rs485-2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__GPIO4_IO24            0x10b0
+			MX6UL_PAD_CSI_DATA01__UART5_DCE_RX          0x10b0
+			MX6UL_PAD_CSI_DATA00__UART5_DCE_TX          0x10b0
+		>;
+	};
+
+	pinctrl_status_leds: status-ledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA09__GPIO3_IO14            0xb0
+			MX6UL_PAD_LCD_DATA10__GPIO3_IO15            0xb0
+			MX6UL_PAD_LCD_DATA14__GPIO3_IO19            0xb0
+		>;
+	};
+
+	pinctrl_stm32: stm32grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX      0x10b0
+			MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX      0x10b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DTE_RX             0xb0
+			MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX          0xb0
+		>;
+	};
+
+	pinctrl_usb: usbgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USB_OTG1_OC              0x70b0
+			MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID         0x70b0
+		>;
+	};
+
+	pinctrl_usb_pwr: usb-pwrgrp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USB_OTG1_PWR             0xb0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x7071
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x7071
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x7071
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x7071
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x7071
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x7071
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x7071
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x7071
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x7071
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x7071
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x70b1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x70b1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x70b1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x70b1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x70b1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x70b1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x70b1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x70b1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x70b1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x70b1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK             0x70f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD             0x70f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0         0x70f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1         0x70f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2         0x70f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3         0x70f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4         0x70f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5         0x70f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6         0x70f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7         0x70f1
+		>;
+	};
+
+	pinctrl_wdog2: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B           0x10b0
+		>;
+	};
+};
+
+&iomuxc_snvs {
+	pinctrl-names = "default_snvs";
+	pinctrl-0 = <&pinctrl_cp_peak_snvs
+		     &pinctrl_gpio_motor_snvs
+		     &pinctrl_relay_sense_snvs
+		     &pinctrl_rotary_switch1_snvs>;
+
+	pinctrl_accelerometer_int1_snvs: accelerometer-int1-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05         0x130a0
+		>;
+	};
+
+	pinctrl_cp_peak_snvs: cp-peak-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10           0x130a0
+			MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11           0x130a0
+		>;
+	};
+
+	pinctrl_enet1_phy_rst: enet1-phy-rstgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06         0x100a0
+		>;
+	};
+
+	pinctrl_fan_sense_snvs: fan-sense-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01         0x100a0
+		>;
+	};
+
+	pinctrl_gpio_motor_snvs: gpio-motor-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08         0x110a0
+		>;
+	};
+
+	pinctrl_qca700x_mains_int: qca700x-mains-intgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09         0x130a0
+		>;
+	};
+
+	pinctrl_qca700x_mains_rst: qca700x-mains-rstgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07         0x400100a0
+		>;
+	};
+
+	pinctrl_relay_sense_snvs: relay-sense-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03         0x100a0
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02         0x100a0
+		>;
+	};
+
+	pinctrl_rotary_switch1_snvs: rotary-switch1-snvsgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00         0x110a0
+		>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_digital_input_ref>;
+	status = "okay";
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_cp>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rs485_1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rs485_2>;
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_stm32>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ext_uart>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb
+		     &pinctrl_usb_pwr>;
+	dr_mode = "host";
+	power-active-high;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-cal-45-dn-ohms = <35>;
+	fsl,tx-cal-45-dp-ohms = <35>;
+};
+
+&usbphy2 {
+	fsl,tx-cal-45-dn-ohms = <35>;
+	fsl,tx-cal-45-dp-ohms = <35>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&sw2_reg>;
+	vqmmc-supply = <&reg_1v8>;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog2>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-master.dts b/arch/arm/boot/dts/imx6ull-tarragon-master.dts
new file mode 100644
index 000000000000..67007ce383e3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tarragon-master.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon Master";
+	compatible = "chargebyte,imx6ull-tarragon-master", "fsl,imx6ull";
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_sense_snvs>;
+		fan-supply = <&reg_fan>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	reg_fan: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "fan-supply";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_enable>;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&ecspi2 {
+	status = "okay";
+
+	qca700x_cp: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_cp_int
+			     &pinctrl_qca700x_cp_rst
+			     &pinctrl_qca700x_cp_btld>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&ecspi4 {
+	status = "okay";
+
+	qca700x_mains: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_mains_int
+			     &pinctrl_qca700x_mains_rst
+			     &pinctrl_qca700x_mains_btld>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_fan>;
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-micro.dts b/arch/arm/boot/dts/imx6ull-tarragon-micro.dts
new file mode 100644
index 000000000000..e471c2005bee
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tarragon-micro.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon Micro";
+	compatible = "chargebyte,imx6ull-tarragon-micro", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-slave.dts b/arch/arm/boot/dts/imx6ull-tarragon-slave.dts
new file mode 100644
index 000000000000..cee223b5f8e1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tarragon-slave.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon Slave";
+	compatible = "chargebyte,imx6ull-tarragon-slave", "fsl,imx6ull";
+};
+
+&ecspi2 {
+	status = "okay";
+
+	qca700x_cp: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_cp_int
+			     &pinctrl_qca700x_cp_rst
+			     &pinctrl_qca700x_cp_btld>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts b/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts
new file mode 100644
index 000000000000..7fd53b7a4372
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright (C) 2023 chargebyte GmbH
+
+#include "imx6ull-tarragon-common.dtsi"
+
+/ {
+	model = "chargebyte Tarragon SlaveXT";
+	compatible = "chargebyte,imx6ull-tarragon-slavext", "fsl,imx6ull";
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_sense_snvs>;
+		fan-supply = <&reg_fan>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	reg_fan: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "fan-supply";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan_enable>;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&ecspi2 {
+	status = "okay";
+
+	qca700x_cp: ethernet@0 {
+		reg = <0x0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qca700x_cp_int
+			     &pinctrl_qca700x_cp_rst
+			     &pinctrl_qca700x_cp_btld>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_fan>;
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts b/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts
new file mode 100644
index 000000000000..e593b7036fc7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ull-tqma6ull2.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6ULL2 SoM on MBa6ULx board";
+	compatible = "tq,imx6ull-tqma6ull2-mba6ulx", "tq,imx6ull-tqma6ull2", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi
new file mode 100644
index 000000000000..8541cb3f3b3e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulx-common.dtsi"
+
+/ {
+	model = "TQ-Systems TQMa6ULL2 SoM";
+	compatible = "tq,imx6ull-tqma6ull2", "fsl,imx6ull";
+};
+
+&usdhc2 {
+	fsl,tuning-step = <6>;
+	/* Errata ERR010450 Workaround */
+	max-frequency = <99000000>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017031
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017039
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017039
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017039
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017039
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017039
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017039
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017039
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017039
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017039
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts b/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts
new file mode 100644
index 000000000000..33437aae9822
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ull-tqma6ull2l.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+	model = "TQ Systems TQMa6ULL2L SoM on MBa6ULx board";
+	compatible = "tq,imx6ull-tqma6ull2l-mba6ulx", "tq,imx6ull-tqma6ull2l", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi
new file mode 100644
index 000000000000..be593d47e3b1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulxl-common.dtsi"
+
+/ {
+	model = "TQ Systems TQMa6ULL2L SoM";
+	compatible = "tq,imx6ull-tqma6ull2l", "fsl,imx6ull";
+};
+
+&usdhc2 {
+	fsl,tuning-step = <6>;
+	/* Errata ERR010450 Workaround */
+	max-frequency = <99000000>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+};
+
+&iomuxc {
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x00017031
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x00017039
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x00017039
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x00017039
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x00017039
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x00017039
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x00017039
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x00017039
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x00017039
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x00017039
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x000170f1
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x000170f1
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x000170f1
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x000170f1
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x000170f1
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x000170f1
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x000170f1
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x000170f1
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x000170f1
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x000170f1
+			/* rst */
+			MX6UL_PAD_NAND_ALE__GPIO4_IO10		0x0001b051
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index 9bf67490ac49..2bccd45e9fc2 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -50,7 +50,7 @@
 };
 
 / {
-	soc {
+	soc: soc {
 		aips3: bus@2200000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts
new file mode 100644
index 000000000000..c92e4e2f6ab9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ulz-bsh-smm-m2.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 BSH Hausgeraete GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx6ulz.dtsi"
+
+/ {
+	model = "BSH SMM M2";
+	compatible = "bsh,imx6ulz-bsh-smm-m2", "fsl,imx6ull", "fsl,imx6ulz";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	usdhc2_pwrseq: usdhc2-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wlan>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	cap-sdio-irq;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio1>;
+		interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&wdog1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpmi-nand {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0xb000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b099
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b099
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0x79		/* BT_REG_ON */
+			MX6UL_PAD_SD1_CLK__GPIO2_IO17		0x100b1		/* BT_DEV_WAKE out */
+			MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x1b0b0		/* BT_HOST_WAKE in */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10059
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_SD1_DATA3__GPIO2_IO21		0x79		/* WL_REG_ON */
+			MX6UL_PAD_UART2_CTS_B__GPIO1_IO22	0x100b1		/* WL_DEV_WAKE - WiFi_GPIO_4 - WiFi FW UART */
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x1b0b1		/* WL_HOST_WAKE - WIFI_GPIO_0 - OOB IRQ */
+			MX6UL_PAD_ENET1_RX_EN__OSC32K_32K_OUT	0x4001b031	/* OSC 32Khz wifi clk in */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
index 139188eb9f40..01612741f792 100644
--- a/arch/arm/boot/dts/imx7-colibri-aster.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
@@ -1,169 +1,80 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2017-2020 Toradex AG
- *
+ * Copyright 2017-2022 Toradex
  */
 
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-
-		power {
-			label = "Wake-Up";
-			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	panel: panel {
-		compatible = "edt,et057090dhu";
-		backlight = <&bl>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lcdif_out>;
-			};
-		};
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbh_vbus: regulator-usbh-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh_reg>;
-		regulator-name = "VCC_USB[1-4]";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
-		vin-supply = <&reg_5v0>;
-	};
-};
-
+/* Colibri AD0 to AD3 */
 &adc1 {
 	status = "okay";
 };
 
-/*
- * ADC2 is not available on the Aster board and
- * conflicts with AD7879 resistive touchscreen.
- */
-&adc2 {
-	status = "disabled";
-};
-
-&bl {
-	brightness-levels = <0 4 8 16 32 64 128 255>;
-	default-brightness-level = <6>;
-	power-supply = <&reg_3v3>;
+/* Colibri SSP */
+&ecspi3 {
+	cs-gpios = <
+		&gpio4 11 GPIO_ACTIVE_LOW /* SODIMM 86 / regular SSPFRM as UNO_SPI_CS or  */
+		&gpio4 23 GPIO_ACTIVE_LOW /* SODIMM 65 / already muxed pinctrl_gpio2 as SPI_CE0_N */
+		&gpio4 22 GPIO_ACTIVE_LOW /* SODIMM 85 / already muxed pinctrl_gpio2 as SPI_CE1_N */
+	>;
 	status = "okay";
 };
 
+/* Colibri Fast Ethernet */
 &fec1 {
 	status = "okay";
 };
 
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
 &i2c4 {
 	status = "okay";
-
-	/* Microchip/Atmel maxtouch controller */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiotouch>;
-		reg = <0x4a>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;	/* SODIMM 107 */
-		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;	/* SODIMM 106 */
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc: m41t0m6@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl_gpiotouch: touchgpios {
-		fsl,pins = <
-			MX7D_PAD_EPDC_DATA15__GPIO2_IO15        0x74
-			MX7D_PAD_EPDC_BDR0__GPIO2_IO28          0x14
-		>;
-	};
-};
-
-&lcdif {
-	status = "okay";
-
-	port {
-		lcdif_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
 };
 
+/* Colibri PWM<A> */
 &pwm1 {
 	status = "okay";
 };
 
+/* Colibri PWM<B> */
 &pwm2 {
 	status = "okay";
 };
 
+/* Colibri PWM<C> */
 &pwm3 {
 	status = "okay";
 };
 
+/* Colibri PWM<D> */
 &pwm4 {
 	status = "okay";
 };
 
+/* M41T0M6 real time clock */
+&rtc {
+	status = "okay";
+};
+
+/* Colibri UART_A */
 &uart1 {
 	status = "okay";
 };
 
+/* Colibri UART_B */
 &uart2 {
 	status = "okay";
 };
 
+/* Colibri UART_C */
 &uart3 {
 	status = "okay";
 };
 
+/* Colibri USBC */
 &usbotg1 {
+	disable-over-current;
 	status = "okay";
 };
 
+/* Colibri MMC/SD */
 &usdhc1 {
-	keep-power-in-suspend;
-	no-1-8-v;
-	wakeup-source;
-	vmmc-supply = <&reg_3v3>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 3caf450735d7..326440f2b4f4 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -1,194 +1,111 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
  */
 
 / {
-	aliases {
-		rtc0 = &rtc;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	/* fixed crystal dedicated to mpc258x */
+	/* Fixed crystal dedicated to MCP2515. */
 	clk16m: clk16m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <16000000>;
 	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys>;
-
-		power {
-			label = "Wake-Up";
-			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	panel: panel {
-		compatible = "edt,et057090dhu";
-		backlight = <&bl>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lcdif_out>;
-			};
-		};
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_5v0: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbh_vbus: regulator-usbh-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh_reg>;
-		regulator-name = "VCC_USB[1-4]";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
-		vin-supply = <&reg_5v0>;
-	};
-};
-
-&bl {
-	brightness-levels = <0 4 8 16 32 64 128 255>;
-	default-brightness-level = <6>;
-	power-supply = <&reg_3v3>;
-
-	status = "okay";
 };
 
+/* Colibri AD0 to AD3 */
 &adc1 {
 	status = "okay";
 };
 
-&adc2 {
-	status = "okay";
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	interrupt-parent = <&gpio1>;
+	interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 / INT */
+	pinctrl-0 = <&pinctrl_atmel_adapter>;
+	reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 / RST */
+	status = "disabled";
 };
 
+/* Colibri SSP */
 &ecspi3 {
 	status = "okay";
 
 	mcp2515: can@0 {
+		clocks = <&clk16m>;
 		compatible = "microchip,mcp2515";
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_can_int>;
 		reg = <0>;
-		clocks = <&clk16m>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		spi-max-frequency = <10000000>;
 		vdd-supply = <&reg_3v3>;
 		xceiver-supply = <&reg_5v0>;
-		status = "okay";
 	};
 };
 
+/* Colibri Fast Ethernet */
 &fec1 {
 	status = "okay";
 };
 
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
 &i2c4 {
 	status = "okay";
-
-	/*
-	 * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
-	 * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
-	 */
-	touchscreen@4a {
-		compatible = "atmel,maxtouch";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiotouch>;
-		reg = <0x4a>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 */
-		reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 */
-		status = "disabled";
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc: m41t0m6@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-&lcdif {
-	status = "okay";
-
-	port {
-		lcdif_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
 };
 
+/* Colibri PWM<A> */
 &pwm1 {
 	status = "okay";
 };
 
+/* Colibri PWM<B> */
 &pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
 	status = "okay";
 };
 
+/* Colibri PWM<C> */
 &pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
 	status = "okay";
 };
 
+/* Colibri PWM<D> */
 &pwm4 {
 	status = "okay";
 };
 
+/* M41T0M6 real time clock */
+&rtc {
+	status = "okay";
+};
+
+/* Colibri UART_A */
 &uart1 {
 	status = "okay";
 };
 
+/* Colibri UART_B */
 &uart2 {
 	status = "okay";
 };
 
+/* Colibri UART_C */
 &uart3 {
 	status = "okay";
 };
 
+/* Colibri USBC */
 &usbotg1 {
+	disable-over-current;
 	status = "okay";
 };
 
+/* Colibri MMC/SD */
 &usdhc1 {
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_3v3>;
 	status = "okay";
 };
-
-&iomuxc {
-	pinctrl_gpiotouch: touchgpios {
-		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x74
-			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi b/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi
new file mode 100644
index 000000000000..b687727f956a
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* SODIMM 100 */
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+		startup-delay-us = <100>;
+	};
+};
+
+/* Colibri AD0 to AD3 */
+&adc1 {
+	status = "okay";
+};
+
+/* Colibri SSP */
+&ecspi3 {
+	status = "okay";
+};
+
+/* Colibri Fast Ethernet */
+&fec1 {
+	status = "okay";
+};
+
+&gpio2 {
+	/*
+	 * uart_b_c_on_x14_enable turns the UART transceiver for UART2 and 5 on. If one wants to
+	 * turn the transceiver off, that property has to be deleted and the gpio handled in
+	 * userspace.
+	 * The same applies to uart_a_on_x13_enable where the UART_A transceiver is turned on.
+	 */
+	uart-b-c-on-x14-enable-hog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
+		output-high;
+	};
+};
+
+&gpio5 {
+	uart-a-on-x13-enable-hog {
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
+		output-high;
+	};
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Colibri PWM<A> */
+&pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	status = "okay";
+};
+
+/* Colibri PWM<D> */
+&pwm4 {
+	status = "okay";
+};
+
+/* M41T0M6 real time clock */
+&rtc {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	status = "okay";
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC/SD, UHS-I capable uSD slot */
+&usdhc1 {
+	cap-power-off-card;
+	/delete-property/ keep-power-in-suspend;
+	/delete-property/ no-1-8-v;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7-colibri-iris.dtsi b/arch/arm/boot/dts/imx7-colibri-iris.dtsi
new file mode 100644
index 000000000000..6a9e5ab59691
--- /dev/null
+++ b/arch/arm/boot/dts/imx7-colibri-iris.dtsi
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/* Colibri AD0 to AD3 */
+&adc1 {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	interrupt-parent = <&gpio1>;
+	interrupts = <9 IRQ_TYPE_EDGE_FALLING>;		/* SODIMM 28 / INT */
+	pinctrl-0 = <&pinctrl_atmel_adapter>;
+	reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;	/* SODIMM 30 / RST */
+};
+
+/* Colibri SSP */
+&ecspi3 {
+	status = "okay";
+};
+
+/* Colibri Fast Ethernet */
+&fec1 {
+	status = "okay";
+};
+
+&gpio2 {
+	/*
+	 * uart25 turns the UART transceiver for UART2 and 5 on. If one wants to turn the
+	 * transceiver off, that property has to be deleted and the gpio handled in userspace.
+	 * The same applies to uart1_tx_on where the UART1 transceiver is turned on.
+	 */
+	uart25-tx-on-hog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
+		output-high;
+	};
+};
+
+&gpio5 {
+	uart1-tx-on-hog {
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
+		output-high;
+	};
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Colibri PWM<A> */
+&pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<D> */
+&pwm4 {
+	status = "okay";
+};
+
+/* M41T0M6 real time clock */
+&rtc {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	status = "okay";
+};
+
+/* Colibri USBC */
+&usbotg1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC/SD */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 62b771c1d5a9..104580d51d74 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -1,96 +1,197 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
  */
 
+#include <dt-bindings/pwm/pwm.h>
+
 / {
-	bl: backlight {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	backlight: backlight {
+		brightness-levels = <0 45 63 88 119 158 203 255>;
 		compatible = "pwm-backlight";
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		pwms = <&pwm1 0 5000000 0>;
-		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_module_3v3>;
+		pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>;
+		status = "disabled";
 	};
 
-	reg_module_3v3: regulator-module-3v3 {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	extcon_usbc_det: usbc-det {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbc_det>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	panel_dpi: panel-dpi {
+		backlight = <&backlight>;
+		compatible = "edt,et057090dhu";
+		power-supply = <&reg_3v3>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "+V3.3";
-		regulator-min-microvolt = <3300000>;
+		regulator-always-on;
 		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V";
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
 		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "5V";
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3";
 	};
 
 	reg_module_3v3_avdd: regulator-module-3v3-avdd {
 		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
 		regulator-name = "+V3.3_AVDD_AUDIO";
+	};
+
+	reg_module_3v3_eth: regulator-module-3v3-eth {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <200000>;
+		regulator-name = "+V3.3_ETH";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
+		regulator-boot-on;
+		startup-delay-us = <200000>;
+		vin-supply = <&reg_LDO1>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_reg>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "VCC_USB[1-4]";
+		vin-supply = <&reg_5v0>;
 	};
 
 	sound {
 		compatible = "simple-audio-card";
-		simple-audio-card,name = "imx7-sgtl5000";
-		simple-audio-card,format = "i2s";
 		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,name = "imx7-sgtl5000";
+
 		simple-audio-card,cpu {
 			sound-dai = <&sai1>;
 		};
 
 		dailink_master: simple-audio-card,codec {
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
 		};
 	};
 };
 
+/* Colibri AD0 to AD3 */
 &adc1 {
 	vref-supply = <&reg_DCDC3>;
 };
 
-&adc2 {
-	vref-supply = <&reg_DCDC3>;
-};
+/* ADC2 is not available as it conflicts with AD7879 resistive touchscreen. */
 
 &cpu0 {
 	cpu-supply = <&reg_DCDC2>;
 };
 
+/* Colibri SSP */
 &ecspi3 {
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* SODIMM 86 / SSPFRM */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>;
-	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
 };
 
+/* Colibri Fast Ethernet */
 &fec1 {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pinctrl_enet1>;
-	pinctrl-1 = <&pinctrl_enet1_sleep>;
-	clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
-		<&clks IMX7D_ENET_AXI_ROOT_CLK>,
-		<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
-		<&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
-	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
-	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
-			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
 	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
 	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rmii";
-	phy-supply = <&reg_LDO1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+	clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+		 <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+		 <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+		 <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
 	fsl,magic-packet;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_module_3v3_eth>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_enet1>;
+	pinctrl-1 = <&pinctrl_enet1_sleep>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Micrel KSZ8041RNL */
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			micrel,led-mode = <0>;
+			reg = <0>;
+		};
+	};
 };
 
 &flexcan1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
 };
 
 &flexcan2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "disabled";
 };
 
 &gpio1 {
@@ -271,14 +372,16 @@
 			  "SODIMM_137";
 };
 
+/* NAND on such SKUs */
 &gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
 	fsl,use-minimum-ecc;
-	nand-on-flash-bbt;
 	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
 };
 
+/* On-module Power I2C */
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
@@ -286,33 +389,33 @@
 	pinctrl-1 = <&pinctrl_i2c1_recovery &pinctrl_i2c1_int>;
 	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
 	status = "okay";
 
 	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
 		#sound-dai-cells = <0>;
-		reg = <0x0a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
+		compatible = "fsl,sgtl5000";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
+		reg = <0xa>;
 		VDDA-supply = <&reg_module_3v3_avdd>;
-		VDDIO-supply = <&reg_module_3v3>;
 		VDDD-supply = <&reg_DCDC3>;
+		VDDIO-supply = <&reg_module_3v3>;
 	};
 
-	ad7879@2c {
+	ad7879_ts: touchscreen@2c {
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,resistance-plate-x = <120>;
 		compatible = "adi,ad7879-1";
-		reg = <0x2c>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x2c>;
 		touchscreen-max-pressure = <4096>;
-		adi,resistance-plate-x = <120>;
-		adi,first-conversion-delay = /bits/ 8 <3>;
-		adi,acquisition-time = /bits/ 8 <1>;
-		adi,median-filter-size = /bits/ 8 <2>;
-		adi,averaging = /bits/ 8 <1>;
-		adi,conversion-interval = /bits/ 8 <255>;
+		status = "disabled";
 	};
 
 	pmic@33 {
@@ -320,71 +423,81 @@
 		reg = <0x33>;
 
 		regulators {
-			reg_DCDC1: DCDC1 {  /* V1.0_SOC */
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
+			reg_DCDC1: DCDC1 {
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1000000>;
+				regulator-name = "+V1.0_SOC";
 			};
 
-			reg_DCDC2: DCDC2 { /* V1.1_ARM */
-				regulator-min-microvolt = <975000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
+			reg_DCDC2: DCDC2 {
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <975000>;
+				regulator-name = "+V1.1_ARM";
 			};
 
-			reg_DCDC3: DCDC3 { /* V1.8 */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
+			reg_DCDC3: DCDC3 {
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8";
 			};
 
-			reg_DCDC4: DCDC4 { /* V1.35_DRAM */
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
+			reg_DCDC4: DCDC4 {
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1350000>;
+				regulator-min-microvolt = <1350000>;
+				regulator-name = "+V1.35_DRAM";
 			};
 
-			reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
+			reg_LDO1: LDO1 {
 				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "PWR_EN_+V3.3_ETH";
 			};
 
-			reg_LDO2: LDO2 { /* +V1.8_SD */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
+			reg_LDO2: LDO2 {
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8_SD";
 			};
 
-			reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
+			reg_LDO3: LDO3 {
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "PWR_EN_+V3.3_LPSR";
 			};
 
-			reg_LDO4: LDO4 { /* V1.8_LPSR */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
+			reg_LDO4: LDO4 {
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8_LPSR";
 			};
 
-			reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
+			reg_LDO5: LDO5 {
 				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "PWR_EN_+V3.3";
 			};
 		};
 	};
 };
 
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
 &i2c4 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default", "gpio";
@@ -392,36 +505,69 @@
 	pinctrl-1 = <&pinctrl_i2c4_recovery>;
 	scl-gpios = <&gpio7 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	sda-gpios = <&gpio7 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+
+	/* Atmel maxtouch controller */
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		interrupt-parent = <&gpio2>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;        /* SODIMM 107 / INT */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_atmel_connector>;
+		reg = <0x4a>;
+		reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;      /* SODIMM 106 / RST */
+		status = "disabled";
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+		status = "disabled";
+	};
 };
 
 &lcdif {
+	assigned-clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_VIDEO_POST_DIV>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lcdif_dat
 		     &pinctrl_lcdif_ctrl>;
+	status = "disabled";
+
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
 };
 
+/* Colibri PWM<A> */
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 };
 
+/* Colibri PWM<B> */
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 };
 
+/* Colibri PWM<C> */
 &pwm3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 };
 
+/* Colibri PWM<D> */
 &pwm4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 };
 
 &reg_1p0d {
-	vin-supply = <&reg_DCDC3>;
+	vin-supply = <&reg_DCDC3>; /* VDDA_1P8_IN */
 };
 
 &sai1 {
@@ -430,237 +576,257 @@
 	status = "okay";
 };
 
+/* Colibri UART_A */
 &uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
 	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
 	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	uart-has-rtscts;
 	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
+	uart-has-rtscts;
 };
 
+/* Colibri UART_B */
 &uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
 	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
 	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
-	uart-has-rtscts;
 	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
 };
 
+/* Colibri UART_C */
 &uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
 	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
 	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
 	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
 };
 
+/* Colibri USBC */
 &usbotg1 {
-	dr_mode = "host";
+	dr_mode = "otg";
+	extcon = <0>, <&extcon_usbc_det>;
 };
 
+/* Colibri MMC/SD */
 &usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
 	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 	disable-wp;
+	no-1-8-v;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_cd_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_cd_usdhc1>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_cd_usdhc1_sleep>;
+	vmmc-supply = <&reg_3v3>;
 	vqmmc-supply = <&reg_LDO2>;
+	wakeup-source;
 };
 
+/* eMMC on 1GB (eMMC) SKUs */
 &usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
 	assigned-clock-rates = <400000000>;
 	bus-width = <8>;
 	fsl,tuning-step = <2>;
-	vmmc-supply = <&reg_module_3v3>;
-	vqmmc-supply = <&reg_DCDC3>;
 	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	sdhci-caps-mask = <0x80000000 0x0>;
+	vmmc-supply = <&reg_module_3v3>;
+	vqmmc-supply = <&reg_DCDC3>;
 };
 
 &iomuxc {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4
-		     &pinctrl_gpio7 &pinctrl_usbc_det>;
-
-	pinctrl_gpio1: gpio1-grp {
-		fsl,pins = <
-			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x14 /* SODIMM 77 */
-			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x14 /* SODIMM 89 */
-			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x74 /* SODIMM 91 */
-			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14 /* SODIMM 93 */
-			MX7D_PAD_EPDC_DATA13__GPIO2_IO13	0x14 /* SODIMM 95 */
-			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x14 /* SODIMM 99 */
-			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x74 /* SODIMM 105 */
-			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14 /* SODIMM 111 */
-			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14 /* SODIMM 113 */
-			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14 /* SODIMM 115 */
-			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14 /* SODIMM 117 */
-			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x14 /* SODIMM 119 */
-			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14 /* SODIMM 121 */
-			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x14 /* SODIMM 123 */
-			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14 /* SODIMM 125 */
-			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x14 /* SODIMM 127 */
-			MX7D_PAD_UART3_RTS_B__GPIO4_IO6		0x14 /* SODIMM 131 */
-			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x14 /* SODIMM 133 */
-			MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12	0x14 /* SODIMM 169 */
-			MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x14 /* SODIMM 24 */
-			MX7D_PAD_SD2_DATA2__GPIO5_IO16		0x14 /* SODIMM 100 */
-			MX7D_PAD_SD2_DATA3__GPIO5_IO17		0x14 /* SODIMM 102 */
-			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x14 /* SODIMM 104 */
-			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x14 /* SODIMM 110 */
-			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x14 /* SODIMM 112 */
-			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x14 /* SODIMM 114 */
-			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x14 /* SODIMM 116 */
-			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x14 /* SODIMM 118 */
-			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x14 /* SODIMM 120 */
-			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x14 /* SODIMM 122 */
-			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x14 /* SODIMM 124 */
-			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x14 /* SODIMM 126 */
-			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x14 /* SODIMM 128 */
-			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x14 /* SODIMM 130 */
-			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x14 /* SODIMM 132 */
-			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x14 /* SODIMM 134 */
-			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14 /* SODIMM 150 */
-			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x14 /* SODIMM 152 */
-			MX7D_PAD_SD2_CLK__GPIO5_IO12		0x14 /* SODIMM 184 */
-			MX7D_PAD_SD2_CMD__GPIO5_IO13		0x14 /* SODIMM 186 */
-		>;
-	};
-
-	pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */
-		fsl,pins = <
-			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x14 /* SODIMM 65 */
-			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x74 /* SODIMM 69 */
-			MX7D_PAD_I2C4_SDA__GPIO4_IO15		0x14 /* SODIMM 75 */
-			MX7D_PAD_ECSPI1_MISO__GPIO4_IO18	0x14 /* SODIMM 79 */
-			MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x14 /* SODIMM 81 */
-			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x14 /* SODIMM 85 */
-			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19		0x14 /* SODIMM 97 */
-			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x14 /* SODIMM 101 */
-			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x14 /* SODIMM 103 */
-			MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x14 /* SODIMM 94 */
-			MX7D_PAD_I2C4_SCL__GPIO4_IO14		0x14 /* SODIMM 96 */
-			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14 /* SODIMM 98 */
-		>;
-	};
-
-	pinctrl_gpio3: gpio3-grp { /* LCD 18-23 */
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
+
+	/*
+	 * Atmel MXT touchsceen + Capacitive Touch Adapter
+	 * NOTE: This pin group conflicts with pin groups pinctrl_pwm2/pinctrl_pwm3.
+	 * Don't use them simultaneously.
+	 */
+	pinctrl_atmel_adapter: atmeladaptergrp {
 		fsl,pins = <
-			MX7D_PAD_LCD_DATA18__GPIO3_IO23		0x14 /* SODIMM 136 */
-			MX7D_PAD_LCD_DATA19__GPIO3_IO24		0x14 /* SODIMM 138 */
-			MX7D_PAD_LCD_DATA20__GPIO3_IO25		0x14 /* SODIMM 140 */
-			MX7D_PAD_LCD_DATA21__GPIO3_IO26		0x14 /* SODIMM 142 */
-			MX7D_PAD_LCD_DATA22__GPIO3_IO27		0x74 /* SODIMM 144 */
-			MX7D_PAD_LCD_DATA23__GPIO3_IO28		0x74 /* SODIMM 146 */
+			MX7D_PAD_GPIO1_IO09__GPIO1_IO9		0x74 /* SODIMM 28 / INT */
+			MX7D_PAD_GPIO1_IO10__GPIO1_IO10		0x14 /* SODIMM 30 / RST */
 		>;
 	};
 
-	pinctrl_gpio4: gpio4-grp { /* Alternatively CAN2 */
+	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
+	pinctrl_atmel_connector: atmelconnectorgrp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO15__GPIO1_IO15		0x14 /* SODIMM 178 */
-			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x14 /* SODIMM 188 */
+			MX7D_PAD_EPDC_BDR0__GPIO2_IO28		0x14 /* SODIMM 106 / RST */
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x74 /* SODIMM 107 / INT */
 		>;
 	};
 
-	pinctrl_gpio7: gpio7-grp { /* Alternatively CAN1 */
+	pinctrl_can_int: canintgrp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3	0x14 /* SODIMM 55 */
-			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2	0x14 /* SODIMM 63 */
+			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0X14 /* SODIMM 73 */
 		>;
 	};
 
-	pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */
+	pinctrl_ecspi3: ecspi3grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x79
+			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2 /* SODIMM 90 */
+			MX7D_PAD_I2C1_SDA__ECSPI3_MOSI		0x2 /* SODIMM 92 */
+			MX7D_PAD_I2C2_SCL__ECSPI3_SCLK		0x2 /* SODIMM 88 */
 		>;
 	};
 
-	pinctrl_can_int: can-int-grp {
+	pinctrl_ecspi3_cs: ecspi3csgrp {
 		fsl,pins = <
-			MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0X14 /* SODIMM 73 */
+			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14 /* SODIMM 86 */
 		>;
 	};
 
 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
 			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x73
 			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x73
 			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER		0x73
-
-			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x73
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
 			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x73
 			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x73
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x73
 			MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1		0x73
 			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
 			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
 		>;
 	};
 
-	pinctrl_enet1_sleep: enet1sleepgrp {
+	pinctrl_enet1_sleep: enet1-sleepgrp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4		0x0
 			MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0		0x0
 			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1		0x0
 			MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5		0x0
-
-			MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10		0x0
+			MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4		0x0
 			MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6		0x0
 			MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7		0x0
+			MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10		0x0
 			MX7D_PAD_GPIO1_IO12__GPIO1_IO12			0x0
 			MX7D_PAD_SD2_CD_B__GPIO5_IO9			0x0
 			MX7D_PAD_SD2_WP__GPIO5_IO10			0x0
 		>;
 	};
 
-	pinctrl_ecspi3_cs: ecspi3-cs-grp {
+	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
-			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14
+			MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX	0x79 /* SODIMM 63 */
+			MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX	0x79 /* SODIMM 55 */
 		>;
 	};
 
-	pinctrl_ecspi3: ecspi3-grp {
+	pinctrl_flexcan2: flexcan2grp {
 		fsl,pins = <
-			MX7D_PAD_I2C1_SCL__ECSPI3_MISO		0x2
-			MX7D_PAD_I2C1_SDA__ECSPI3_MOSI		0x2
-			MX7D_PAD_I2C2_SCL__ECSPI3_SCLK		0x2
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x79 /* SODIMM 188 */
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x79 /* SODIMM 178 */
 		>;
 	};
 
-	pinctrl_flexcan1: flexcan1-grp {
+	pinctrl_gpio1: gpio1grp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX	0x79 /* SODIMM 55 */
-			MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX	0x79 /* SODIMM 63 */
+			MX7D_PAD_EPDC_BDR1__GPIO2_IO29		0x14 /* SODIMM 110 */
+			MX7D_PAD_EPDC_DATA00__GPIO2_IO0		0x14 /* SODIMM 111 */
+			MX7D_PAD_EPDC_DATA01__GPIO2_IO1		0x14 /* SODIMM 113 */
+			MX7D_PAD_EPDC_DATA02__GPIO2_IO2		0x14 /* SODIMM 115 */
+			MX7D_PAD_EPDC_DATA03__GPIO2_IO3		0x14 /* SODIMM 117 */
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x14 /* SODIMM 119 */
+			MX7D_PAD_EPDC_DATA05__GPIO2_IO5		0x14 /* SODIMM 121 */
+			MX7D_PAD_EPDC_DATA06__GPIO2_IO6		0x14 /* SODIMM 123 */
+			MX7D_PAD_EPDC_DATA07__GPIO2_IO7		0x14 /* SODIMM 125 */
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x74 /* SODIMM 91 */
+			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x14 /* SODIMM 89 */
+			MX7D_PAD_EPDC_DATA10__GPIO2_IO10	0x74 /* SODIMM 105 */
+			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x14 /* SODIMM 152 */
+			MX7D_PAD_EPDC_DATA12__GPIO2_IO12	0x14 /* SODIMM 150 */
+			MX7D_PAD_EPDC_DATA14__GPIO2_IO14	0x14 /* SODIMM 126 */
+			MX7D_PAD_EPDC_GDCLK__GPIO2_IO24		0x14 /* SODIMM 132 */
+			MX7D_PAD_EPDC_GDOE__GPIO2_IO25		0x14 /* SODIMM 134 */
+			MX7D_PAD_EPDC_GDRL__GPIO2_IO26		0x14 /* SODIMM 133 */
+			MX7D_PAD_EPDC_GDSP__GPIO2_IO27		0x14 /* SODIMM 104 */
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x14 /* SODIMM 112 */
+			MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31	0x14 /* SODIMM 128 */
+			MX7D_PAD_EPDC_SDCE0__GPIO2_IO20		0x14 /* SODIMM 122 */
+			MX7D_PAD_EPDC_SDCE1__GPIO2_IO21		0x14 /* SODIMM 124 */
+			MX7D_PAD_EPDC_SDCE2__GPIO2_IO22		0x14 /* SODIMM 127 */
+			MX7D_PAD_EPDC_SDCE3__GPIO2_IO23		0x14 /* SODIMM 130 */
+			MX7D_PAD_EPDC_SDCLK__GPIO2_IO16		0x14 /* SODIMM 114 */
+			MX7D_PAD_EPDC_SDLE__GPIO2_IO17		0x14 /* SODIMM 116 */
+			MX7D_PAD_EPDC_SDOE__GPIO2_IO18		0x14 /* SODIMM 118 */
+			MX7D_PAD_EPDC_SDSHR__GPIO2_IO19		0x14 /* SODIMM 120 */
+			MX7D_PAD_LCD_RESET__GPIO3_IO4		0x14 /* SODIMM 93 */
+			MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17	0x14 /* SODIMM 24 */
+			MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12	0x14 /* SODIMM 169 */
+			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x14 /* SODIMM 77 */
+			MX7D_PAD_SD2_CLK__GPIO5_IO12		0x14 /* SODIMM 184 */
+			MX7D_PAD_SD2_CMD__GPIO5_IO13		0x14 /* SODIMM 186 */
+			MX7D_PAD_SD2_DATA2__GPIO5_IO16		0x14 /* SODIMM 100 */
+			MX7D_PAD_SD2_DATA3__GPIO5_IO17		0x14 /* SODIMM 102 */
+			MX7D_PAD_UART3_RTS_B__GPIO4_IO6		0x14 /* SODIMM 131 */
 		>;
 	};
 
-	pinctrl_flexcan2: flexcan2-grp {
+	pinctrl_gpio2: gpio2grp { /* On X22 Camera interface */
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x79 /* SODIMM 188 */
-			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x79 /* SODIMM 178 */
+			MX7D_PAD_ECSPI1_MISO__GPIO4_IO18	0x14 /* SODIMM 79 */
+			MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17	0x14 /* SODIMM 103 */
+			MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16	0x14 /* SODIMM 101 */
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19		0x14 /* SODIMM 97 */
+			MX7D_PAD_ECSPI2_MISO__GPIO4_IO22	0x14 /* SODIMM 85 */
+			MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x14 /* SODIMM 65 */
+			MX7D_PAD_I2C3_SCL__GPIO4_IO12		0x14 /* SODIMM 81 */
+			MX7D_PAD_I2C3_SDA__GPIO4_IO13		0x14 /* SODIMM 94 */
+			MX7D_PAD_I2C4_SCL__GPIO4_IO14		0x14 /* SODIMM 96 */
+			MX7D_PAD_I2C4_SDA__GPIO4_IO15		0x14 /* SODIMM 75 */
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x74 /* SODIMM 69 */
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14 /* SODIMM 98 */
+		>;
+	};
+
+	pinctrl_gpio3: gpio3grp { /* LCD 18-23 */
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA18__GPIO3_IO23		0x14 /* SODIMM 136 */
+			MX7D_PAD_LCD_DATA19__GPIO3_IO24		0x14 /* SODIMM 138 */
+			MX7D_PAD_LCD_DATA20__GPIO3_IO25		0x14 /* SODIMM 140 */
+			MX7D_PAD_LCD_DATA21__GPIO3_IO26		0x14 /* SODIMM 142 */
+			MX7D_PAD_LCD_DATA22__GPIO3_IO27		0x74 /* SODIMM 144 */
+			MX7D_PAD_LCD_DATA23__GPIO3_IO28		0x74 /* SODIMM 146 */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp { /* Alternatively CAN2 */
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x14 /* SODIMM 188 */
+			MX7D_PAD_GPIO1_IO15__GPIO1_IO15		0x14 /* SODIMM 178 */
+		>;
+	};
+
+	pinctrl_gpio7: gpio7grp { /* Alternatively CAN1 */
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2	0x14 /* SODIMM 63 */
+			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3	0x14 /* SODIMM 55 */
 		>;
 	};
 
-	pinctrl_gpio_bl_on: gpio-bl-on {
+	pinctrl_gpio_bl_on: gpioblongrp {
 		fsl,pins = <
 			MX7D_PAD_SD1_WP__GPIO5_IO1		0x14 /* SODIMM 71 */
 		>;
 	};
 
-	pinctrl_gpmi_nand: gpmi-nand-grp {
+	pinctrl_gpmi_nand: gpminandgrp {
 		fsl,pins = <
-			MX7D_PAD_SD3_CLK__NAND_CLE		0x71
-			MX7D_PAD_SD3_CMD__NAND_ALE		0x71
 			MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B	0x71
 			MX7D_PAD_SAI1_TX_DATA__NAND_READY_B	0x74
-			MX7D_PAD_SD3_STROBE__NAND_RE_B		0x71
-			MX7D_PAD_SD3_RESET_B__NAND_WE_B		0x71
+			MX7D_PAD_SD3_CLK__NAND_CLE		0x71
+			MX7D_PAD_SD3_CMD__NAND_ALE		0x71
 			MX7D_PAD_SD3_DATA0__NAND_DATA00		0x71
 			MX7D_PAD_SD3_DATA1__NAND_DATA01		0x71
 			MX7D_PAD_SD3_DATA2__NAND_DATA02		0x71
@@ -669,13 +835,21 @@
 			MX7D_PAD_SD3_DATA5__NAND_DATA05		0x71
 			MX7D_PAD_SD3_DATA6__NAND_DATA06		0x71
 			MX7D_PAD_SD3_DATA7__NAND_DATA07		0x71
+			MX7D_PAD_SD3_RESET_B__NAND_WE_B		0x71
+			MX7D_PAD_SD3_STROBE__NAND_RE_B		0x71
 		>;
 	};
 
-	pinctrl_i2c4: i2c4-grp {
+	pinctrl_i2c1_int: i2c1intgrp { /* PMIC / TOUCH */
 		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA	0x4000007f
-			MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL	0x4000007f
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x79
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL	0x4000007f /* SODIMM 196 */
+			MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA	0x4000007f /* SODIMM 194 */
 		>;
 	};
 
@@ -686,155 +860,176 @@
 		>;
 	};
 
-	pinctrl_lcdif_dat: lcdif-dat-grp {
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79 /* SODIMM 76 */
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79 /* SODIMM 70 */
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79 /* SODIMM 60 */
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79 /* SODIMM 58 */
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79 /* SODIMM 78 */
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79 /* SODIMM 72 */
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79 /* SODIMM 80 */
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79 /* SODIMM 46 */
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79 /* SODIMM 62 */
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79 /* SODIMM 48 */
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79 /* SODIMM 74 */
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79 /* SODIMM 50 */
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79 /* SODIMM 52 */
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79 /* SODIMM 54 */
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79 /* SODIMM 66 */
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79 /* SODIMM 64 */
+			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79 /* SODIMM 57 */
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79 /* SODIMM 61 */
+		>;
+	};
+
+	pinctrl_lcdif_dat_24: lcdifdat24grp {
 		fsl,pins = <
-			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
-			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
-			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
-			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
-			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
-			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
-			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
-			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
-			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
-			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
-			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
-			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
-			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
-			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
-			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
-			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
-			MX7D_PAD_LCD_DATA16__LCD_DATA16		0x79
-			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79 /* SODIMM 136 */
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79 /* SODIMM 138 */
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79 /* SODIMM 140 */
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79 /* SODIMM 142 */
+			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79 /* SODIMM 144 */
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79 /* SODIMM 146 */
 		>;
 	};
 
-	pinctrl_lcdif_dat_24: lcdif-dat-24-grp {
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
 		fsl,pins = <
-			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
-			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
-			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
-			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
-			MX7D_PAD_LCD_DATA22__LCD_DATA22		0x79
-			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79 /* SODIMM 56 */
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79 /* SODIMM 44 */
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79 /* SODIMM 68 */
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79 /* SODIMM 82 */
 		>;
 	};
 
-	pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
+	pinctrl_lvds_transceiver: lvdstx {
 		fsl,pins = <
-			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
-			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
-			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
-			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2     0x14 /* SODIMM 63 */
+			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3     0x74 /* SODIMM 55 */
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11    0x14 /* SODIMM 99 */
+			MX7D_PAD_EPDC_DATA13__GPIO2_IO13        0x14 /* SODIMM 95 */
 		>;
 	};
 
-	pinctrl_pwm1: pwm1-grp {
+	pinctrl_pwm1: pwm1grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO08__PWM1_OUT		0x79
-			MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x4
+			MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x4  /* SODIMM 59 */
+			MX7D_PAD_GPIO1_IO08__PWM1_OUT		0x79 /* SODIMM 59 */
 		>;
 	};
 
-	pinctrl_pwm2: pwm2-grp {
+	pinctrl_pwm2: pwm2grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x79
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT		0x79 /* SODIMM 28 */
 		>;
 	};
 
-	pinctrl_pwm3: pwm3-grp {
+	pinctrl_pwm3: pwm3grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__PWM3_OUT		0x79
+			MX7D_PAD_GPIO1_IO10__PWM3_OUT		0x79 /* SODIMM 30 */
 		>;
 	};
 
-	pinctrl_pwm4: pwm4-grp {
+	pinctrl_pwm4: pwm4grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO11__PWM4_OUT		0x79
-			MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x4
+			MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20	0x4  /* SODIMM 67 */
+			MX7D_PAD_GPIO1_IO11__PWM4_OUT		0x79 /* SODIMM 67 */
 		>;
 	};
 
-	pinctrl_uart1: uart1-grp {
+	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX	0x79
-			MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX	0x79
-			MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS	0x79
-			MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS	0x79
+			MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS	0x79 /* SODIMM 25 */
+			MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS	0x79 /* SODIMM 27 */
+			MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX	0x79 /* SODIMM 35 */
+			MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX	0x79 /* SODIMM 33 */
 		>;
 	};
 
-	pinctrl_uart1_ctrl1: uart1-ctrl1-grp {
+	pinctrl_uart1_ctrl1: uart1ctrl1grp {
 		fsl,pins = <
-			MX7D_PAD_SD2_DATA1__GPIO5_IO15		0x14 /* DCD */
-			MX7D_PAD_SD2_DATA0__GPIO5_IO14		0x14 /* DTR */
+			MX7D_PAD_SD2_DATA0__GPIO5_IO14		0x14 /* SODIMM 23 / DTR */
+			MX7D_PAD_SD2_DATA1__GPIO5_IO15		0x14 /* SODIMM 31 / DCD */
 		>;
 	};
 
-	pinctrl_uart2: uart2-grp {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS	0x79 /* SODIMM 32 / CTS */
+			MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS	0x79 /* SODIMM 34 / RTS */
+			MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX	0x79 /* SODIMM 38 */
+			MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX	0x79 /* SODIMM 36 */
+		>;
+	};
+	pinctrl_uart3: uart3grp {
 		fsl,pins = <
-			MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79
-			MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79
-			MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79
-			MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79
+			MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX	0x79 /* SODIMM 21 */
+			MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX	0x79 /* SODIMM 19 */
 		>;
 	};
-	pinctrl_uart3: uart3-grp {
+
+	pinctrl_usbc_det: usbcdetgrp {
 		fsl,pins = <
-			MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79
-			MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79
+			MX7D_PAD_ENET1_CRS__GPIO7_IO14		0x14 /* SODIMM 137 / USBC_DET */
 		>;
 	};
 
-	pinctrl_usbc_det: gpio-usbc-det {
+	pinctrl_usbh_reg: usbhreggrp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_CRS__GPIO7_IO14	0x14
+			MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14 /* SODIMM 129 / USBH_PEN */
 		>;
 	};
 
-	pinctrl_usbh_reg: gpio-usbh-vbus {
+	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
-			MX7D_PAD_UART3_CTS_B__GPIO4_IO7	0x14 /* SODIMM 129 USBH PEN */
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19 /* SODIMM 47 */
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59 /* SODIMM 190 */
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59 /* SODIMM 192 */
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59 /* SODIMM 49 */
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59 /* SODIMM 51 */
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59 /* SODIMM 53 */
 		>;
 	};
 
-	pinctrl_usdhc1: usdhc1-grp {
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
-			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
-			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
-			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
-			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
-			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5a
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5a
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5a
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5a
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
 		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD	0x5a
-			MX7D_PAD_SD1_CLK__SD1_CLK	0x1a
-			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x5a
-			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x5a
-			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x5a
-			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x5a
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x1b
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x5b
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x5b
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x5b
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x5b
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x5b
 		>;
 	};
 
-	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+	/* Avoid backfeeding with removed card power. */
+	pinctrl_usdhc1_sleep: usdhc1-slpgrp {
 		fsl,pins = <
-			MX7D_PAD_SD1_CMD__SD1_CMD	0x5b
-			MX7D_PAD_SD1_CLK__SD1_CLK	0x1b
-			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x5b
-			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x5b
-			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x5b
-			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x5b
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x10
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x10
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x10
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x10
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x10
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x10
 		>;
 	};
 
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
 			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
 			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
 			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
 			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
@@ -847,10 +1042,10 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
 			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
 			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
 			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
 			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
@@ -863,10 +1058,10 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
-			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
 			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
 			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
 			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
 			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
@@ -879,16 +1074,16 @@
 		>;
 	};
 
-	pinctrl_sai1: sai1-grp {
+	pinctrl_sai1: sai1grp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
-			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
 			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
+			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
 			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
 		>;
 	};
 
-	pinctrl_sai1_mclk: sai1grp_mclk {
+	pinctrl_sai1_mclk: sai1mclkgrp {
 		fsl,pins = <
 			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
 		>;
@@ -899,23 +1094,35 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio_lpsr>;
 
-	pinctrl_gpio_lpsr: gpio1-grp {
+	pinctrl_cd_usdhc1: cdusdhc1grp {
 		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x59
-			MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3	0x59
+			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59 /* SODIMM 43 / MMC_CD */
+		>;
+	};
+
+	pinctrl_cd_usdhc1_sleep: cdusdhc1-slpgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x0
+		>;
+	};
+
+	pinctrl_gpio_lpsr: gpiolpsrgrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x59 /* SODIMM 135 */
+			MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3	0x59 /* SODIMM 22 */
 		>;
 	};
 
 	pinctrl_gpiokeys: gpiokeysgrp {
 		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x19
+			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x19 /* SODIMM 45 / WAKE_UP */
 		>;
 	};
 
-	pinctrl_i2c1: i2c1-grp {
+	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA	0x4000007f
 			MX7D_PAD_LPSR_GPIO1_IO04__I2C1_SCL	0x4000007f
+			MX7D_PAD_LPSR_GPIO1_IO05__I2C1_SDA	0x4000007f
 		>;
 	};
 
@@ -926,16 +1133,10 @@
 		>;
 	};
 
-	pinctrl_cd_usdhc1: usdhc1-cd-grp {
-		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59 /* CD */
-		>;
-	};
-
-	pinctrl_uart1_ctrl2: uart1-ctrl2-grp {
+	pinctrl_uart1_ctrl2: uart1ctrl2grp {
 		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x14 /* DSR */
-			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14 /* RI */
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14 /* SODIMM 37 / RI */
+			MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7	0x14 /* SODIMM 29 / DSR */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi
index c6d1c63f7905..3df6dff7734a 100644
--- a/arch/arm/boot/dts/imx7-mba7.dtsi
+++ b/arch/arm/boot/dts/imx7-mba7.dtsi
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0 OR X11
 /*
- * Device Tree Include file for TQ Systems MBa7 carrier board.
+ * Device Tree Include file for TQ-Systems MBa7 carrier board.
  *
- * Copyright (C) 2016 TQ Systems GmbH
+ * Copyright (C) 2016 TQ-Systems GmbH
  * Author: Markus Niebel <Markus.Niebel@tq-group.com>
  * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
  *
@@ -216,7 +216,6 @@
 	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
 	phy-reset-duration = <1>;
-	phy-reset-delay = <1>;
 	phy-supply = <&reg_fec1_pwdn>;
 	phy-handle = <&ethphy1_0>;
 	fsl,magic-packet;
@@ -237,6 +236,44 @@
 	};
 };
 
+&flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uboot@0 {
+			label = "U-Boot";
+			reg = <0x0 0xd0000>;
+		};
+
+		env1@d0000 {
+			label = "ENV1";
+			reg = <0xd0000 0x10000>;
+		};
+
+		env2@e0000 {
+			label = "ENV2";
+			reg = <0xe0000 0x10000>;
+		};
+
+		dtb@f0000 {
+			label = "DTB";
+			reg = <0xf0000 0x10000>;
+		};
+
+		linux@100000 {
+			label = "Linux";
+			reg = <0x100000 0x700000>;
+		};
+
+		rootfs@800000 {
+			label = "RootFS";
+			reg = <0x800000 0x3800000>;
+		};
+	};
+};
+
 &flexcan1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
@@ -265,7 +302,7 @@
 	tlv320aic32x4: audio-codec@18 {
 		compatible = "ti,tlv320aic32x4";
 		reg = <0x18>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		ldoin-supply = <&reg_audio_3v3>;
 		iov-supply = <&reg_audio_3v3>;
diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi
index 8773344b54aa..fe42b0a46831 100644
--- a/arch/arm/boot/dts/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/imx7-tqma7.dtsi
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0 OR X11
 /*
- * Device Tree Include file for TQ Systems TQMa7x boards with full mounted PCB.
+ * Device Tree Include file for TQ-Systems TQMa7x boards with full mounted PCB.
  *
- * Copyright (C) 2016 TQ Systems GmbH
+ * Copyright (C) 2016 TQ-Systems GmbH
  * Author: Markus Niebel <Markus.Niebel@tq-group.com>
  * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
  */
@@ -19,6 +19,16 @@
 	cpu-supply = <&sw1a_reg>;
 };
 
+&gpio2 {
+	/* Configured as pullup by QSPI pin group */
+	qspi-reset-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "qspi-reset";
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
@@ -160,6 +170,25 @@
 		>;
 	};
 
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0	0x5A
+			MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1	0x5A
+			MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2	0x5A
+			MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3	0x5A
+			MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK	0x11
+			MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B	0x54
+			MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B	0x54
+		>;
+	};
+
+	pinctrl_qspi_reset: qspi_resetgrp {
+		fsl,pins = <
+			/* #QSPI_RESET */
+			MX7D_PAD_EPDC_DATA04__GPIO2_IO4		0x52
+		>;
+	};
+
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
@@ -217,6 +246,20 @@
 	};
 };
 
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi &pinctrl_qspi_reset>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <29000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
 &sdma {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-aster.dts b/arch/arm/boot/dts/imx7d-colibri-aster.dts
index f3f0537d5a37..00ab92e56da4 100644
--- a/arch/arm/boot/dts/imx7d-colibri-aster.dts
+++ b/arch/arm/boot/dts/imx7d-colibri-aster.dts
@@ -1,7 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2017-2020 Toradex AG
- *
+ * Copyright 2017-2022 Toradex
  */
 
 /dts-v1/;
@@ -10,11 +9,33 @@
 
 / {
 	model = "Toradex Colibri iMX7D on Aster Carrier Board";
-	compatible = "toradex,colibri-imx7d-aster", "toradex,colibri-imx7d",
+	compatible = "toradex,colibri-imx7d-aster",
+		     "toradex,colibri-imx7d",
 		     "fsl,imx7d";
 };
 
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri USBH */
 &usbotg2 {
-	vbus-supply = <&reg_usbh_vbus>;
+	disable-over-current;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
index 20480276cb0e..d9c7045a55ba 100644
--- a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2017-2020 Toradex AG
+ * Copyright 2017-2022 Toradex
  *
  */
 
@@ -11,10 +11,13 @@
 / {
 	model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board";
 	compatible = "toradex,colibri-imx7d-emmc-aster",
-		     "toradex,colibri-imx7d-emmc", "fsl,imx7d";
+		     "toradex,colibri-imx7d-emmc",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
 };
 
+/* Colibri USBH */
 &usbotg2 {
-	vbus-supply = <&reg_usbh_vbus>;
+	disable-over-current;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
index 8ee73c870b12..96b599439dde 100644
--- a/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2017 Toradex AG
+ * Copyright 2017-2022 Toradex
  */
 
 /dts-v1/;
@@ -10,10 +10,13 @@
 / {
 	model = "Toradex Colibri iMX7D 1GB (eMMC) on Colibri Evaluation Board V3";
 	compatible = "toradex,colibri-imx7d-emmc-eval-v3",
-		     "toradex,colibri-imx7d-emmc", "fsl,imx7d";
+		     "toradex,colibri-imx7d-emmc",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
 };
 
+/* Colibri USBH */
 &usbotg2 {
-	vbus-supply = <&reg_usbh_vbus>;
+	disable-over-current;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts
new file mode 100644
index 000000000000..5eccb837b158
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB on Iris V2 Carrier Board";
+	compatible = "toradex,colibri-imx7d-emmc-iris-v2",
+		     "toradex,colibri-imx7d-emmc",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts
new file mode 100644
index 000000000000..ae10e8a66ff1
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri-emmc.dtsi"
+#include "imx7-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D 1GB on Iris Carrier Board";
+	compatible = "toradex,colibri-imx7d-emmc-iris",
+		     "toradex,colibri-imx7d-emmc",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
index af39e5370fa1..3740e34ef99f 100644
--- a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
+++ b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi
@@ -1,18 +1,28 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2017 Toradex AG
+ * Copyright 2017-2022 Toradex
  */
 
 #include "imx7d.dtsi"
 #include "imx7-colibri.dtsi"
 
 / {
+	aliases {
+		/* Required to properly pass MAC addresses from bootloader. */
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;
 	};
 };
 
+&cpu1 {
+	cpu-supply = <&reg_DCDC2>;
+};
+
 &gpio6 {
 	gpio-line-names = "",
 			  "",
@@ -39,10 +49,14 @@
 			  "SODIMM_34";
 };
 
+/* Colibri USBH */
 &usbotg2 {
+	disable-over-current;
 	dr_mode = "host";
+	vbus-supply = <&reg_usbh_vbus>;
 };
 
+/* eMMC */
 &usdhc3 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
index 87b132bcd272..33d787617db0 100644
--- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
  */
 
 /dts-v1/;
@@ -9,11 +9,49 @@
 
 / {
 	model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d",
+	compatible = "toradex,colibri-imx7d-eval-v3",
+		     "toradex,colibri-imx7d",
 		     "fsl,imx7d";
 };
 
+&ad7879_ts {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	status = "disabled";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri USBH */
 &usbotg2 {
-	vbus-supply = <&reg_usbh_vbus>;
+	disable-over-current;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts b/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts
new file mode 100644
index 000000000000..afdb1d06c7f6
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-iris-v2.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Iris V2 Carrier Board";
+	compatible = "toradex,colibri-imx7d-iris-v2",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map-hog {
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
+
+&gpio7 {
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/* This turns the LVDS transceiver on */
+	lvds-power-on-hog {
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri-iris.dts b/arch/arm/boot/dts/imx7d-colibri-iris.dts
new file mode 100644
index 000000000000..531b0b99bd5a
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-colibri-iris.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7D on Iris Carrier Board";
+	compatible = "toradex,colibri-imx7d-iris",
+		     "toradex,colibri-imx7d",
+		     "fsl,imx7d";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	status = "disabled";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi
index 219a0404a058..531a45b176a1 100644
--- a/arch/arm/boot/dts/imx7d-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7d-colibri.dtsi
@@ -1,12 +1,18 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
  */
 
 #include "imx7d.dtsi"
 #include "imx7-colibri.dtsi"
 
 / {
+	aliases {
+		/* Required to properly pass MAC addresses from bootloader. */
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>;
@@ -17,10 +23,13 @@
 	cpu-supply = <&reg_DCDC2>;
 };
 
+/* NAND */
 &gpmi {
 	status = "okay";
 };
 
+/* Colibri USBH */
 &usbotg2 {
 	dr_mode = "host";
+	vbus-supply = <&reg_usbh_vbus>;
 };
diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts
index 5ef86de53013..32bf9fa9d00e 100644
--- a/arch/arm/boot/dts/imx7d-mba7.dts
+++ b/arch/arm/boot/dts/imx7d-mba7.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0 OR X11
 /*
- * Device Tree Source for TQ Systems TQMa7D board on MBa7 carrier board.
+ * Device Tree Source for TQ-Systems TQMa7D board on MBa7 carrier board.
  *
- * Copyright (C) 2016 TQ Systems GmbH
+ * Copyright (C) 2016 TQ-Systems GmbH
  * Author: Markus Niebel <Markus.Niebel@tq-group.com>
  * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
  */
@@ -13,7 +13,7 @@
 #include "imx7-mba7.dtsi"
 
 / {
-	model = "TQ Systems TQMa7D board on MBa7 carrier board";
+	model = "TQ-Systems TQMa7D board on MBa7 carrier board";
 	compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d";
 };
 
@@ -23,7 +23,6 @@
 	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
 	phy-reset-duration = <1>;
-	phy-reset-delay = <1>;
 	phy-supply = <&reg_fec2_pwdn>;
 	phy-handle = <&ethphy2_0>;
 	fsl,magic-packet;
@@ -99,8 +98,6 @@
 	/* probe deferral not supported */
 	/* pcie-bus-supply = <&reg_mpcie_1v5>; */
 	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	disable-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
-	power-on-gpio = <&gpio2 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/imx7d-meerkat96.dts
index 5339210b63d0..dd8003bd1fc0 100644
--- a/arch/arm/boot/dts/imx7d-meerkat96.dts
+++ b/arch/arm/boot/dts/imx7d-meerkat96.dts
@@ -193,7 +193,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	keep-power-in-suspend;
-	tuning-step = <2>;
+	fsl,tuning-step = <2>;
 	vmmc-supply = <&reg_3p3v>;
 	no-1-8-v;
 	broken-cd;
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index e0751e6ba3c0..a31de900139d 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -288,7 +288,7 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 	};
diff --git a/arch/arm/boot/dts/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/imx7d-pico-dwarf.dts
index 5162fe227d1e..fdc10563f147 100644
--- a/arch/arm/boot/dts/imx7d-pico-dwarf.dts
+++ b/arch/arm/boot/dts/imx7d-pico-dwarf.dts
@@ -32,7 +32,7 @@
 };
 
 &i2c1 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -52,7 +52,7 @@
 };
 
 &i2c4 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index 7b2198a9372c..d917dc4f2f22 100644
--- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
diff --git a/arch/arm/boot/dts/imx7d-pico-nymph.dts b/arch/arm/boot/dts/imx7d-pico-nymph.dts
index 104a85254adb..5afb1674e012 100644
--- a/arch/arm/boot/dts/imx7d-pico-nymph.dts
+++ b/arch/arm/boot/dts/imx7d-pico-nymph.dts
@@ -43,7 +43,7 @@
 };
 
 &i2c1 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
@@ -64,7 +64,7 @@
 };
 
 &i2c2 {
-	clock_frequency = <100000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts
index 70bea95c06d8..f263e391e24c 100644
--- a/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ b/arch/arm/boot/dts/imx7d-pico-pi.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
diff --git a/arch/arm/boot/dts/imx7d-pico.dtsi b/arch/arm/boot/dts/imx7d-pico.dtsi
index e57da0d32b98..e0bff39e8d3e 100644
--- a/arch/arm/boot/dts/imx7d-pico.dtsi
+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -41,7 +41,7 @@
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-        };
+	};
 
 	reg_wlreg_on: regulator-wlreg_on {
 		compatible = "regulator-fixed";
@@ -351,7 +351,7 @@
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
-	tuning-step = <2>;
+	fsl,tuning-step = <2>;
 	vmmc-supply = <&reg_3p3v>;
 	wakeup-source;
 	no-1-8-v;
@@ -432,7 +432,7 @@
 			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
 			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
 			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
-			MX7D_PAD_SD3_RESET_B__GPIO6_IO11                0x1  /* Ethernet reset */
+			MX7D_PAD_SD3_RESET_B__GPIO6_IO11		0x1  /* Ethernet reset */
 		>;
 	};
 
@@ -493,19 +493,19 @@
 
 	pinctrl_pwm1: pwm1 {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO08__PWM1_OUT   0x7f
+			MX7D_PAD_GPIO1_IO08__PWM1_OUT	0x7f
 		>;
 	};
 
 	pinctrl_pwm2: pwm2 {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO09__PWM2_OUT   0x7f
+			MX7D_PAD_GPIO1_IO09__PWM2_OUT	0x7f
 		>;
 	};
 
 	pinctrl_pwm3: pwm3 {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO10__PWM3_OUT   0x7f
+			MX7D_PAD_GPIO1_IO10__PWM3_OUT	0x7f
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
new file mode 100644
index 000000000000..92cb45dacda6
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -0,0 +1,595 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+ *
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "reMarkable 2.0";
+	compatible = "remarkable,imx7d-remarkable2", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart6;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	thermal-zones {
+		epd-thermal {
+			thermal-sensors = <&sy7636a>;
+			polling-delay-passive = <30000>;
+			polling-delay = <30000>;
+
+			trips {
+				trip0 {
+					temperature = <49000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <150>;
+	};
+
+	reg_digitizer: regulator-digitizer {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_DIGITIZER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pinctrl_digitizer_reg>;
+		pinctrl-1 = <&pinctrl_digitizer_reg>;
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>; /* 100 ms */
+	};
+
+	reg_touch: regulator-touch {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_TOUCH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_reg>;
+		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi>;
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&buck1>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
+			  <&clks IMX7D_CLKO2_ROOT_DIV>;
+	assigned-clock-parents = <&clks IMX7D_CKIL>;
+	assigned-clock-rates = <0>, <32768>;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	wacom_digitizer: digitizer@9 {
+		compatible = "hid-over-i2c";
+		reg = <0x09>;
+		hid-descr-addr = <0x01>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wacom>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		vdd-supply = <&reg_digitizer>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	bd71815: pmic@4b {
+		compatible = "rohm,bd71815";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bd71815>;
+		interrupt-parent = <&gpio6>; /* PMIC_INT_B GPIO6_IO16 */
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		clocks = <&clks IMX7D_CLKO2_ROOT_SRC>;
+		clock-output-names = "bd71815-32k-out";
+		#clock-cells = <0>;
+		#gpio-cells = <2>;
+
+		regulators {
+			buck1: buck1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2: buck2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck3: buck3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: buck4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: buck5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: ldo1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: ldo2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: ldo3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: ldo4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: ldo5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6: ldodvref {
+				regulator-name = "ldodvref";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7: ldolpsr {
+				regulator-name = "ldolpsr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			boost: wled {
+				regulator-name = "wled";
+				regulator-min-microamp = <10>;
+				regulator-max-microamp = <25000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_touch>;
+		touchscreen-size-x = <880>;
+		touchscreen-size-y = <1280>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			reg = <0>;
+			linux,keycodes = <KEY_HOMEPAGE>;
+		};
+
+		button@1 {
+			reg = <1>;
+			linux,keycodes = <KEY_MENU>;
+		};
+
+		button@2 {
+			reg = <2>;
+			linux,keycodes = <KEY_BACK>;
+		};
+
+		button@3 {
+			reg = <3>;
+			linux,keycodes = <KEY_SEARCH>;
+		};
+
+		button@4 {
+			reg = <4>;
+			linux,keycodes = <KEY_VOLUMEDOWN>;
+		};
+
+		button@5 {
+			reg = <5>;
+			linux,keycodes = <KEY_VOLUMEUP>;
+		};
+
+		button@6 {
+			reg = <6>;
+			linux,keycodes = <KEY_CAMERA>;
+		};
+
+		button@7 {
+			reg = <7>;
+			linux,keycodes = <KEY_POWER>;
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	sy7636a: pmic@62 {
+		compatible = "silergy,sy7636a";
+		reg = <0x62>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_epdpmic>;
+		#thermal-sensor-cells = <0>;
+		epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			reg_epdpmic: vcom {
+				regulator-name = "vcom";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&usbotg2 {
+	srp-disable;
+	hnp-disable;
+	status = "okay";
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	vmmc-supply = <&reg_brcm>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc_lpsr {
+	pinctrl_digitizer_reg: digitizerreggrp {
+		fsl,pins = <
+			/* DIGITIZER_PWR_EN */
+			MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x14
+		>;
+	};
+
+	pinctrl_wacom: wacomgrp {
+		fsl,pins = <
+			/*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x00000014 FWE */
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x00000074 /* PDCTB */
+			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1	0x00000034 /* WACOM INT */
+			/*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6	0x00000014 WACOM PWR ENABLE */
+			/*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x00000074 WACOM RESET */
+		>;
+	};
+};
+
+&iomuxc {
+	pinctrl_bd71815: bd71815grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x59
+		>;
+	};
+
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			/* WIFI_PWR_EN */
+			MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
+		>;
+	};
+
+	pinctrl_epdpmic: epdpmicgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x00000074
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11	0x00000014
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* CYTTSP interrupt */
+			MX7D_PAD_GPIO1_IO14__GPIO1_IO14		0x54
+			/* CYTTSP reset */
+			MX7D_PAD_GPIO1_IO13__GPIO1_IO13		0x04
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
+			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_touch_reg: touchreggrp {
+		fsl,pins = <
+			/* TOUCH_PWR_EN */
+			MX7D_PAD_GPIO1_IO11__GPIO1_IO11		0x14
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA09__UART6_DCE_TX		0x79
+			MX7D_PAD_EPDC_DATA08__UART6_DCE_RX		0x79
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY	0x74
+		>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <
+			/* WiFi Reg On */
+			MX7D_PAD_SD2_CD_B__GPIO5_IO9		0x00000014
+			/* WiFi Sleep 32k */
+			MX7D_PAD_SD1_WP__CCM_CLKO2		0x00000014
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index ac0751bc1177..f483bc0afe5e 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -24,14 +24,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			wakeup-source;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
@@ -39,13 +39,13 @@
 		};
 	};
 
-	spi4 {
+	spi-4 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_spi4>;
 		gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -164,6 +164,13 @@
 			"LINPUT1", "AMIC",
 			"AMIC", "MICB";
 	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-sii902x";
+		model = "sii902x-audio";
+		audio-cpu = <&sai3>;
+		hdmi-out;
+	};
 };
 
 &adc1 {
@@ -194,17 +201,12 @@
 		compatible = "ti,tsc2046";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
-		pinctrl-names ="default";
+		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tsc2046_pendown>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <29 0>;
 		pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		ti,x-min = /bits/ 16 <0>;
-		ti,x-max = /bits/ 16 <0>;
-		ti,y-min = /bits/ 16 <0>;
-		ti,y-max = /bits/ 16 <0>;
-		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plate-ohms = /bits/ 16 <400>;
+		touchscreen-max-pressure = <255>;
 		wakeup-source;
 	};
 };
@@ -378,14 +380,14 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 		wlf,hp-cfg = <2 2 3>;
 		wlf,gpio-cfg = <1 3>;
 		assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
 				  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-				  <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+				  <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
 		assigned-clock-rates = <0>, <884736000>, <12288000>;
 	};
diff --git a/arch/arm/boot/dts/imx7d-smegw01.dts b/arch/arm/boot/dts/imx7d-smegw01.dts
new file mode 100644
index 000000000000..c0f00f5db11e
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-smegw01.dts
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright (C) 2020 PHYTEC Messtechnik GmbH
+// Author: Jens Lang  <J.Lang@phytec.de>
+// Copyright (C) 2021 Fabio Estevam <festevam@denx.de>
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx7d.dtsi"
+
+/ {
+	model = "Storopack SMEGW01 board";
+	compatible = "storopack,imx7d-smegw01", "fsl,imx7d";
+
+	aliases {
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc3;
+		mmc2 = &usdhc2;
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_lte_on: regulator-lte-on {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lte_on>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "lte_on";
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_lte_nreset: regulator-lte-nreset {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lte_nreset>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "LTE_nReset";
+		gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi>;
+		regulator-name = "wifi_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_wlan_rfkill: regulator-wlan-rfkill {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-2 = <&pinctrl_rfkill>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "wlan_rfkill";
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1_pwr_gpio>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 05 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	sram@0 {
+		compatible = "microchip,48l640";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <16000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id0022.1622",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+
+		ethphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-id0022.1622",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 =<&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+		reg = <0x52>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1_lpsr>;
+	dr_mode = "otg";
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	over-current-active-low;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	wakeup-source;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	max-frequency = <200000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <1>;
+	non-removable;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	mmc-ddr-1_8v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19	0x04
+			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x04
+			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x04
+			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO	0x04
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x5
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x5
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x5
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x5
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x5
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x5
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x5
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x5
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x5
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x5
+			MX7D_PAD_GPIO1_IO10__ENET1_MDIO		0x7
+			MX7D_PAD_GPIO1_IO11__ENET1_MDC		0x7
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x5
+			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC	0x5
+			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0	0x5
+			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1	0x5
+			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2	0x5
+			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3	0x5
+			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0	0x5
+			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1	0x5
+			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2	0x5
+			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3	0x5
+			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x5
+			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC	0x5
+			MX7D_PAD_GPIO1_IO09__GPIO1_IO9	0x08
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x40000004
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x40000004
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX	0x0b0b0
+			MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX	0x0b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x0b0b0
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x0b0b0
+		>;
+	};
+
+	pinctrl_lte_on: lteongrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12	0x17059
+		>;
+	};
+
+	pinctrl_lte_nreset: ltenresetgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21	0x17059
+		>;
+	};
+
+	pinctrl_rfkill: rfkillrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA11__GPIO2_IO11	0x17059
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA15__GPIO2_IO15	0x17059
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x74
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x7c
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x7c
+			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x74
+		>;
+	};
+
+	pinctrl_usbotg1_lpsr: usbotg1 {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC	0x04
+		>;
+	};
+
+	pinctrl_usbotg1_pwr: usbotg1-pwr {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR	0x04
+		>;
+	};
+
+	pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpio {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x04
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_RTS_B__USB_OTG2_OC	0x5c
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+			MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+			MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+			MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+			MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+			MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+			MX7D_PAD_SD2_CD_B__SD2_CD_B		0x08
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5d
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1d
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5d
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5d
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5d
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5d
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5d
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5d
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5d
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5d
+			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1d
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5e
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1e
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5e
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5e
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5e
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5e
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5e
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5e
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5e
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5e
+			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1e
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5f
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x0f
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5f
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5f
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5f
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5f
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5f
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5f
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5f
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5f
+			MX7D_PAD_SD3_STROBE__SD3_STROBE	0x1f
+		>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30	0x04
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x04
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-tqma7.dtsi b/arch/arm/boot/dts/imx7d-tqma7.dtsi
index 598aed1ffd99..3ee2017c1ab3 100644
--- a/arch/arm/boot/dts/imx7d-tqma7.dtsi
+++ b/arch/arm/boot/dts/imx7d-tqma7.dtsi
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0 OR X11
 /*
- * Device Tree Include file for TQ Systems TQMa7D board with NXP i.MX7Dual SoC.
+ * Device Tree Include file for TQ-Systems TQMa7D board with NXP i.MX7Dual SoC.
  *
- * Copyright (C) 2016 TQ Systems GmbH
+ * Copyright (C) 2016 TQ-Systems GmbH
  * Author: Markus Niebel <Markus.Niebel@tq-group.com>
  * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
  */
diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
index 1065941807e8..521493342fe9 100644
--- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts
+++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
@@ -24,7 +24,7 @@
 		pinctrl-0 = <&pinctrl_leds_debug>;
 		pinctrl-names = "default";
 
-		debug {
+		led-debug {
 			label = "zii:green:debug1";
 			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -204,7 +204,7 @@
 	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
index 893bd30aa2a3..decc19af3b83 100644
--- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts
+++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
@@ -36,7 +36,7 @@
 		pinctrl-0 = <&pinctrl_leds_debug>;
 		pinctrl-names = "default";
 
-		debug {
+		led-debug {
 			label = "zii:green:debug1";
 			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -607,7 +607,7 @@
 	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index b0bcfa9094a3..4b94b8afb55d 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -78,7 +78,7 @@
 		#phy-cells = <0>;
 	};
 
-	soc {
+	soc: soc {
 		etm@3007d000 {
 			compatible = "arm,coresight-etm3x", "arm,primecell";
 			reg = <0x3007d000 0x1000>;
@@ -113,6 +113,49 @@
 			      <0x31004000 0x2000>,
 			      <0x31006000 0x2000>;
 		};
+
+		pcie: pcie@33800000 {
+			compatible = "fsl,imx7d-pcie";
+			reg = <0x33800000 0x4000>,
+			      <0x4ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0          0x4ff80000 0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			/*
+			 * Reference manual lists pci irqs incorrectly
+			 * Real hardware ordering is same as imx6: D+MSI, C, B, A
+			 */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
+				 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
+				 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy";
+			assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
+					  <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
+			assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
+						 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+
+			fsl,max-link-speed = <2>;
+			power-domains = <&pgc_pcie_phy>;
+			resets = <&src IMX7_RESET_PCIEPHY>,
+				 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			fsl,imx7d-pcie-phy = <&pcie_phy>;
+			status = "disabled";
+		};
 	};
 };
 
@@ -122,6 +165,15 @@
 		  reg = <0x306d0000 0x10000>;
 		  status = "disabled";
 	};
+
+	pxp: pxp@30700000 {
+		compatible = "fsl,imx7d-pxp";
+		reg = <0x30700000 0x10000>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_PXP_CLK>;
+		clock-names = "axi";
+	};
 };
 
 &aips3 {
@@ -162,50 +214,6 @@
 		fsl,stop-mode = <&gpr 0x10 4>;
 		status = "disabled";
 	};
-
-	pcie: pcie@33800000 {
-		compatible = "fsl,imx7d-pcie", "snps,dw-pcie";
-		reg = <0x33800000 0x4000>,
-		      <0x4ff00000 0x80000>;
-		reg-names = "dbi", "config";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		bus-range = <0x00 0xff>;
-		ranges = <0x81000000 0 0          0x4ff80000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
-		num-lanes = <1>;
-		num-viewport = <4>;
-		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "msi";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		/*
-		 * Reference manual lists pci irqs incorrectly
-		 * Real hardware ordering is same as imx6: D+MSI, C, B, A
-		 */
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
-			 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
-			 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
-		clock-names = "pcie", "pcie_bus", "pcie_phy";
-		assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
-				  <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
-		assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
-					 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-
-		fsl,max-link-speed = <2>;
-		power-domains = <&pgc_pcie_phy>;
-		resets = <&src IMX7_RESET_PCIEPHY>,
-			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>,
-			 <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>;
-		reset-names = "pciephy", "apps", "turnoff";
-		fsl,imx7d-pcie-phy = <&pcie_phy>;
-		status = "disabled";
-	};
 };
 
 &ca_funnel_in_ports {
diff --git a/arch/arm/boot/dts/imx7s-colibri-aster.dts b/arch/arm/boot/dts/imx7s-colibri-aster.dts
index fca4e0a95c1b..58ebb02d948a 100644
--- a/arch/arm/boot/dts/imx7s-colibri-aster.dts
+++ b/arch/arm/boot/dts/imx7s-colibri-aster.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2017-2020 Toradex AG
+ * Copyright 2017-2022 Toradex
  *
  */
 
@@ -10,6 +10,27 @@
 
 / {
 	model = "Toradex Colibri iMX7S on Aster Carrier Board";
-	compatible = "toradex,colibri-imx7s-aster", "toradex,colibri-imx7s",
+	compatible = "toradex,colibri-imx7s-aster",
+		     "toradex,colibri-imx7s",
 		     "fsl,imx7s";
 };
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
index aa70d3f2e2e2..38de76630d6a 100644
--- a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
  */
 
 /dts-v1/;
@@ -9,6 +9,43 @@
 
 / {
 	model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri-imx7s-eval-v3", "toradex,colibri-imx7s",
+	compatible = "toradex,colibri-imx7s-eval-v3",
+		     "toradex,colibri-imx7s",
 		     "fsl,imx7s";
 };
+
+&ad7879_ts {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	status = "disabled";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts b/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts
new file mode 100644
index 000000000000..72b5c17ab1ab
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-colibri-iris-v2.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Iris V2 Carrier Board";
+	compatible = "toradex,colibri-imx7s-iris-v2",
+		     "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+&atmel_mxt_ts {
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&gpio2 {
+	/*
+	 * This switches the LVDS transceiver to VESA color mapping mode.
+	 */
+	lvds-color-map-hog {
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+		line-name = "LVDS_COLOR_MAP";
+		output-low;
+	};
+};
+
+&gpio7 {
+	/*
+	 * This switches the LVDS transceiver to the 24-bit RGB mode.
+	 */
+	lvds-rgb-mode-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+		line-name = "LVDS_RGB_MODE";
+		output-low;
+	};
+
+	/*
+	 * This switches the LVDS transceiver to the single-channel
+	 * output mode.
+	 */
+	lvds-ch-mode-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+		line-name = "LVDS_CH_MODE";
+		output-high;
+	};
+
+	/* This turns the LVDS transceiver on */
+	lvds-power-on-hog {
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+		line-name = "LVDS_POWER_ON";
+		output-high;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri-iris.dts b/arch/arm/boot/dts/imx7s-colibri-iris.dts
new file mode 100644
index 000000000000..26ba72c17feb
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-colibri-iris.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX7S on Iris Carrier Board";
+	compatible = "toradex,colibri-imx7s-iris",
+		     "toradex,colibri-imx7s",
+		     "fsl,imx7s";
+};
+
+&ad7879_ts {
+	status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+	status = "disabled";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&panel_dpi {
+	status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+	/* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+	/* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi
index 94de220a5965..ef51395d3537 100644
--- a/arch/arm/boot/dts/imx7s-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7s-colibri.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2016-2020 Toradex
+ * Copyright 2016-2022 Toradex
  */
 
 #include "imx7s.dtsi"
@@ -13,6 +13,7 @@
 	};
 };
 
+/* NAND */
 &gpmi {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7s-mba7.dts b/arch/arm/boot/dts/imx7s-mba7.dts
index d7d3f530f843..8e4cf589c92c 100644
--- a/arch/arm/boot/dts/imx7s-mba7.dts
+++ b/arch/arm/boot/dts/imx7s-mba7.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0 OR X11
 /*
- * Device Tree Source for TQ Systems TQMa7S board on MBa7 carrier board.
+ * Device Tree Source for TQ-Systems TQMa7S board on MBa7 carrier board.
  *
- * Copyright (C) 2016 TQ Systems GmbH
+ * Copyright (C) 2016 TQ-Systems GmbH
  * Author: Markus Niebel <Markus.Niebel@tq-group.com>
  * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
  */
@@ -13,6 +13,6 @@
 #include "imx7-mba7.dtsi"
 
 / {
-	model = "TQ Systems TQMa7S board on MBa7 carrier board";
+	model = "TQ-Systems TQMa7S board on MBa7 carrier board";
 	compatible = "tq,imx7s-mba7", "tq,imx7s-tqma7", "fsl,imx7s";
 };
diff --git a/arch/arm/boot/dts/imx7s-tqma7.dtsi b/arch/arm/boot/dts/imx7s-tqma7.dtsi
index 5f5433eb7dd7..7a190fdb2d30 100644
--- a/arch/arm/boot/dts/imx7s-tqma7.dtsi
+++ b/arch/arm/boot/dts/imx7s-tqma7.dtsi
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0 OR X11
 /*
- * Device Tree Include file for TQ Systems TQMa7S board with NXP i.MX7Solo SoC.
+ * Device Tree Include file for TQ-Systems TQMa7S board with NXP i.MX7Solo SoC.
  *
- * Copyright (C) 2016 TQ Systems GmbH
+ * Copyright (C) 2016 TQ-Systems GmbH
  * Author: Markus Niebel <Markus.Niebel@tq-group.com>
  * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
  */
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index 569bbd84e371..e8734d218b9d 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -75,7 +75,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -232,7 +232,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&vgen4_reg>;
@@ -248,17 +248,17 @@
 
 &mipi_csi {
 	clock-frequency = <166000000>;
-	fsl,csis-hs-settle = <3>;
 	status = "okay";
 
-	port@0 {
-		reg = <0>;
+	ports {
+		port@0 {
+			reg = <0>;
 
-		mipi_from_sensor: endpoint {
-			remote-endpoint = <&ov2680_to_mipi>;
-			data-lanes = <1>;
+			mipi_from_sensor: endpoint {
+				remote-endpoint = <&ov2680_to_mipi>;
+				data-lanes = <1>;
+			};
 		};
-
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index a22d41e0cf31..efe2525b62fa 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -76,6 +76,22 @@
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clks IMX7D_CLK_ARM>;
 			cpu-idle-states = <&cpu_sleep_wait>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+			nvmem-cells = <&fuse_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-792000000 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+			opp-supported-hw = <0xf>, <0xf>;
 		};
 	};
 
@@ -104,6 +120,7 @@
 		compatible = "usb-nop-xceiv";
 		clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_hsic_phy>;
 		#phy-cells = <0>;
 	};
 
@@ -159,7 +176,7 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -430,7 +447,7 @@
 				status = "disabled";
 			};
 
-			iomuxc_lpsr: iomuxc-lpsr@302c0000 {
+			iomuxc_lpsr: pinctrl@302c0000 {
 				compatible = "fsl,imx7d-iomuxc-lpsr";
 				reg = <0x302c0000 0x10000>;
 				fsl,input-sel = <&iomuxc>;
@@ -496,7 +513,7 @@
 
 				mux: mux-controller {
 					compatible = "mmio-mux";
-					#mux-control-cells = <0>;
+					#mux-control-cells = <1>;
 					mux-reg-masks = <0x14 0x00000010>;
 				};
 
@@ -707,6 +724,34 @@
 				status = "disabled";
 			};
 
+			ftm1: pwm@30640000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				reg = <0x30640000 0x10000>;
+				#pwm-cells = <3>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER1_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			ftm2: pwm@30650000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				reg = <0x30650000 0x10000>;
+				#pwm-cells = <3>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "ftm_sys", "ftm_ext",
+				"ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>,
+					<&clks IMX7D_FLEXTIMER2_ROOT_CLK>;
+				status = "disabled";
+			};
+
 			pwm1: pwm@30660000 {
 				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
 				reg = <0x30660000 0x10000>;
@@ -781,8 +826,6 @@
 			mipi_csi: mipi-csi@30750000 {
 				compatible = "fsl,imx7-mipi-csi2";
 				reg = <0x30750000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_IPG_ROOT_CLK>,
 					 <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
@@ -791,18 +834,22 @@
 				power-domains = <&pgc_mipi_phy>;
 				phy-supply = <&reg_1p0d>;
 				resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
-				reset-names = "mrst";
 				status = "disabled";
 
-				port@0 {
-					reg = <0>;
-				};
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
 
-				port@1 {
-					reg = <1>;
+					port@0 {
+						reg = <0>;
+					};
 
-					mipi_vc0_to_csi_mux: endpoint {
-						remote-endpoint = <&csi_mux_from_mipi_vc0>;
+					port@1 {
+						reg = <1>;
+
+						mipi_vc0_to_csi_mux: endpoint {
+							remote-endpoint = <&csi_mux_from_mipi_vc0>;
+						};
 					};
 				};
 			};
@@ -1107,7 +1154,6 @@
 				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x30b30000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&pgc_hsic_phy>;
 				clocks = <&clks IMX7D_USB_CTRL_CLK>;
 				fsl,usbphy = <&usbphynop3>;
 				fsl,usbmisc = <&usbmisc3 0>;
@@ -1178,7 +1224,7 @@
 				status = "disabled";
 			};
 
-			sdma: sdma@30bd0000 {
+			sdma: dma-controller@30bd0000 {
 				compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -1218,7 +1264,6 @@
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 			#dma-cells = <1>;
 			dma-channels = <4>;
 			clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index b7ea37ad4e55..f91bf719d4e2 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -189,7 +189,7 @@
 		};
 
 		usbotg1: usb@40330000 {
-			compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+			compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", "fsl,imx27-usb";
 			reg = <0x40330000 0x200>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_USB0>;
@@ -202,7 +202,8 @@
 		};
 
 		usbmisc1: usbmisc@40330200 {
-			compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc";
+			compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
 			#index-cells = <1>;
 			reg = <0x40330200 0x200>;
 		};
@@ -259,7 +260,7 @@
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
 			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-			assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
 			timeout-sec = <40>;
 		};
 
@@ -328,8 +329,9 @@
 			compatible = "fsl,imx7ulp-lpi2c";
 			reg = <0x40a40000 0x10000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>;
-			clock-names = "ipg";
+			clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>,
+				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
+			clock-names = "per", "ipg";
 			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>;
 			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
 			assigned-clock-rates = <48000000>;
@@ -340,8 +342,9 @@
 			compatible = "fsl,imx7ulp-lpi2c";
 			reg = <0x40a50000 0x10000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>;
-			clock-names = "ipg";
+			clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>,
+				 <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>;
+			clock-names = "per", "ipg";
 			assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>;
 			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>;
 			assigned-clock-rates = <48000000>;
diff --git a/arch/arm/boot/dts/imxrt1050-evk.dts b/arch/arm/boot/dts/imxrt1050-evk.dts
new file mode 100644
index 000000000000..6a9c10decf52
--- /dev/null
+++ b/arch/arm/boot/dts/imxrt1050-evk.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+/dts-v1/;
+#include "imxrt1050.dtsi"
+#include "imxrt1050-pinfunc.h"
+
+/ {
+	model = "NXP IMXRT1050-evk board";
+	compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		mmc0 = &usdhc1;
+		serial0 = &lpuart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x2000000>;
+	};
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD	0xf1
+			MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD	0xf1
+		>;
+	};
+
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B		0x1B000
+			MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT	0xB069
+			MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1	0x17061
+			MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0	0x17061
+		>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0>;
+	pinctrl-2 = <&pinctrl_usdhc0>;
+	pinctrl-3 = <&pinctrl_usdhc0>;
+	cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imxrt1050-pinfunc.h b/arch/arm/boot/dts/imxrt1050-pinfunc.h
new file mode 100644
index 000000000000..22c14a3262ad
--- /dev/null
+++ b/arch/arm/boot/dts/imxrt1050-pinfunc.h
@@ -0,0 +1,993 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H
+#define _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H
+
+#define IMX_PAD_SION	0x40000000
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00				0x014 0x204 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXPWM4_PWM0_A			0x014 0x204 0x494 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_LPSPI2_SCK				0x014 0x204 0x500 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_00_XBAR_INOUT2				0x014 0x204 0x60C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXIO1_D00				0x014 0x204 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_GPIO4_IO00				0x014 0x204 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01				0x018 0x208 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXPWM4_PWM0_B			0x018 0x208 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_LPSPI2_PCS0				0x018 0x208 0x4FC 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_01_XBAR_INOUT3				0x018 0x208 0x610 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXIO1_D01				0x018 0x208 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_GPIO4_IO01				0x018 0x208 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02				0x01C 0x20C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_FLEXPWM4_PWM1_A			0x01C 0x20C 0x498 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_LPSPI2_SDO				0x01C 0x20C 0x508 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_02_XBAR_INOUT4				0x01C 0x20C 0x614 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_FLEXIO1_D02				0x01C 0x20C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_GPIO4_IO02				0x01C 0x20C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03				0x020 0x210 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_FLEXPWM4_PWM1_B			0x020 0x210 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_LPSPI2_SDI				0x020 0x210 0x504 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_03_XBAR_INOUT5				0x020 0x210 0x618 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_FLEXIO1_D03				0x020 0x210 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_GPIO4_IO03				0x020 0x210 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04				0x024 0x214 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_FLEXPWM4_PWM2_A			0x024 0x214 0x49C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_SAI2_TX_DATA			0x024 0x214 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_XBAR_INOUT6				0x024 0x214 0x61C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_FLEXIO1_D04				0x024 0x214 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_GPIO4_IO04				0x024 0x214 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05				0x028 0x218 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_FLEXPWM4_PWM2_B			0x028 0x218 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_SAI2_TX_SYNC			0x028 0x218 0x5C4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_XBAR_INOUT7				0x028 0x218 0x620 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_FLEXIO1_D05				0x028 0x218 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_GPIO4_IO05				0x028 0x218 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06				0x02C 0x21C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_FLEXPWM2_PWM0_A			0x02C 0x21C 0x478 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_SAI2_TX_BCLK			0x02C 0x21C 0x5C0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_XBAR_INOUT8				0x02C 0x21C 0x624 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_FLEXIO1_D06				0x02C 0x21C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_GPIO4_IO06				0x02C 0x21C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07				0x030 0x220 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_FLEXPWM2_PWM0_B			0x030 0x220 0x488 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_SAI2_MCLK				0x030 0x220 0x5B0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_XBAR_INOUT9				0x030 0x220 0x628 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_FLEXIO1_D07				0x030 0x220 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_GPIO4_IO07				0x030 0x220 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00				0x034 0x224 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_FLEXPWM2_PWM1_A			0x034 0x224 0x47C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_SAI2_RX_DATA			0x034 0x224 0x5B8 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_XBAR_INOUT17			0x034 0x224 0x62C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_FLEXIO1_D08				0x034 0x224 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_GPIO4_IO08				0x034 0x224 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00				0x038 0x228 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXPWM2_PWM1_B			0x038 0x228 0x48C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_SAI2_RX_SYNC			0x038 0x228 0x5BC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXCAN2_TX				0x038 0x228 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXIO1_D09				0x038 0x228 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_GPIO4_IO09				0x038 0x228 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01				0x03C 0x22C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXPWM2_PWM2_A			0x03C 0x22C 0x480 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_SAI2_RX_BCLK			0x03C 0x22C 0x5B4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXCAN2_RX				0x03C 0x22C 0x450 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXIO1_D10				0x03C 0x22C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_GPIO4_IO10				0x03C 0x22C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02				0x040 0x230 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_FLEXPWM2_PWM2_B			0x040 0x230 0x490 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_LPI2C4_SDA				0x040 0x230 0x4E8 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_USDHC2_RESET_B			0x040 0x230 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_FLEXIO1_D11				0x040 0x230 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_GPIO4_IO11				0x040 0x230 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03				0x044 0x234 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_XBAR_INOUT24			0x044 0x234 0x640 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_LPI2C4_SCL				0x044 0x234 0x4E4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_USDHC2_WP				0x044 0x234 0x5D8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_FLEXPWM1_PWM3_A			0x044 0x234 0x454 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_12_GPIO4_IO12				0x044 0x234 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04				0x048 0x238 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_XBAR_INOUT25			0x048 0x238 0x650 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_13_LPUART3_TXD				0x048 0x238 0x53C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_MQS_RIGHT				0x048 0x238 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_FLEXPWM1_PWM3_B			0x048 0x238 0x464 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_13_GPIO4_IO13				0x048 0x238 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05				0x04C 0x23C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_XBAR_INOUT19			0x04C 0x23C 0x654 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_LPUART3_RXD				0x04C 0x23C 0x538 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_MQS_LEFT				0x04C 0x23C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_LPSPI2_PCS1				0x04C 0x23C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_GPIO4_IO14				0x04C 0x23C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06				0x050 0x240 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_XBAR_INOUT20			0x050 0x240 0x634 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_LPUART3_CTS_B			0x050 0x240 0x534 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_SPDIF_OUT				0x050 0x240 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_TMR3_TIMER0				0x050 0x240 0x57C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_GPIO4_IO15				0x050 0x240 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07				0x054 0x244 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_XBAR_INOUT21			0x054 0x244 0x658 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_LPUART3_RTS_B			0x054 0x244 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_SPDIF_IN				0x054 0x244 0x5C8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_16_TMR3_TIMER1				0x054 0x244 0x580 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_GPIO4_IO16				0x054 0x244 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08				0x058 0x248 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_FLEXPWM4_PWM3_A			0x058 0x248 0x4A0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_LPUART4_CTS_B			0x058 0x248 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_FLEXCAN1_TX				0x058 0x248 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_TMR3_TIMER2				0x058 0x248 0x584 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_GPIO4_IO17				0x058 0x248 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09				0x05C 0x24C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_FLEXPWM4_PWM3_B			0x05C 0x24C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_LPUART4_RTS_B			0x05C 0x24C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_FLEXCAN1_RX				0x05C 0x24C 0x44C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_18_TMR3_TIMER3				0x05C 0x24C 0x588 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_GPIO4_IO18				0x05C 0x24C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_SNVS_VIO_5_CTL			0x05C 0x24C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11				0x060 0x250 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_FLEXPWM2_PWM3_A			0x060 0x250 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_LPUART4_TXD				0x060 0x250 0x544 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_19_ENET_RX_DATA01			0x060 0x250 0x438 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_TMR2_TIMER0				0x060 0x250 0x56C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_GPIO4_IO19				0x060 0x250 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_SNVS_VIO_5				0x060 0x250 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12				0x064 0x254 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_FLEXPWM2_PWM3_B			0x064 0x254 0x484 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_20_LPUART4_RXD				0x064 0x254 0x540 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_20_ENET_RX_DATA00			0x064 0x254 0x434 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_TMR2_TIMER0				0x064 0x254 0x570 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_GPIO4_IO20				0x064 0x254 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0				0x068 0x258 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_FLEXPWM3_PWM3_A			0x068 0x258 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_LPI2C3_SDA				0x068 0x258 0x4E0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_ENET_TX_DATA01			0x068 0x258 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_TMR2_TIMER2				0x068 0x258 0x574 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_GPIO4_IO21				0x068 0x258 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1				0x06C 0x25C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_FLEXPWM3_PWM3_B			0x06C 0x25C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_LPI2C3_SCL				0x06C 0x25C 0x4DC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_ENET_TX_DATA00			0x06C 0x25C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_TMR2_TIMER3				0x06C 0x25C 0x578 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_GPIO4_IO22				0x06C 0x25C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10				0x070 0x260 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_FLEXPWM1_PWM0_A			0x070 0x260 0x458 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_LPUART5_TXD				0x070 0x260 0x54C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_ENET_RX_EN				0x070 0x260 0x43C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_GPT1_CAPTURE2			0x070 0x260 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_GPIO4_IO23				0x070 0x260 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS				0x074 0x264 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_FLEXPWM1_PWM0_B			0x074 0x264 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_LPUART5_RXD				0x074 0x264 0x548 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_ENET_TX_EN				0x074 0x264 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_GPT1_CAPTURE1			0x074 0x264 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_GPIO4_IO24				0x074 0x264 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS				0x078 0x268 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_FLEXPWM1_PWM1_A			0x078 0x268 0x45C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_LPUART6_TXD				0x078 0x268 0x554 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_ENET_TX_CLK				0x078 0x268 0x448 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_ENET_REF_CLK			0x078 0x268 0x42C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_GPIO4_IO25				0x078 0x268 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK				0x07C 0x26C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_FLEXPWM1_PWM1_B			0x07C 0x26C 0x46C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_LPUART6_RXD				0x07C 0x26C 0x550 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_ENET_RX_ER				0x07C 0x26C 0x440 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_FLEXIO1_D12				0x07C 0x26C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_GPIO4_IO26				0x07C 0x26C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE				0x080 0x270 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_FLEXPWM1_PWM2_A			0x080 0x270 0x460 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_LPUART5_RTS_B			0x080 0x270 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_LPSPI1_SCK				0x080 0x270 0x4F0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_FLEXIO1_D13				0x080 0x270 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_GPIO4_IO27				0x080 0x270 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE				0x084 0x274 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_FLEXPWM1_PWM2_B			0x084 0x274 0x470 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_LPUART5_CTS_B			0x084 0x274 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_LPSPI1_SDO				0x084 0x274 0x4F8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_FLEXIO1_D14				0x084 0x274 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_GPIO4_IO28				0x084 0x274 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0				0x088 0x278 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_FLEXPWM3_PWM0_A			0x088 0x278 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_LPUART6_RTS_B			0x088 0x278 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_LPSPI1_SDI				0x088 0x278 0x4F4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_FLEXIO1_D15				0x088 0x278 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_GPIO4_IO29				0x088 0x278 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08				0x08C 0x27C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_FLEXPWM3_PWM0_B			0x08C 0x27C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_LPUART6_CTS_B			0x08C 0x27C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_LPSPI1_PCS0				0x08C 0x27C 0x4EC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_30_CSI_DATA23				0x08C 0x27C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_GPIO4_IO30				0x08C 0x27C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09				0x090 0x280 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_FLEXPWM3_PWM1_A			0x090 0x280 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_LPUART7_TXD				0x090 0x280 0x55C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_31_LPSPI1_PCS1				0x090 0x280 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_CSI_DATA22				0x090 0x280 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_GPIO4_IO31				0x090 0x280 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10				0x094 0x284 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_FLEXPWM3_PWM1_B			0x094 0x284 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_LPUART7_RXD				0x094 0x284 0x558 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_32_CCM_PMIC_READY			0x094 0x284 0x3FC 0x3 0x4
+#define MXRT1050_IOMUXC_GPIO_EMC_32_CSI_DATA21				0x094 0x284 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_GPIO3_IO18				0x094 0x284 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11				0x098 0x288 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_FLEXPWM3_PWM2_A			0x098 0x288 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_USDHC1_RESET_B			0x098 0x288 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_SAI3_RX_DATA			0x098 0x288 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_CSI_DATA20				0x098 0x288 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_GPIO3_IO19				0x098 0x288 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12				0x09C 0x28C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_FLEXPWM3_PWM2_B			0x09C 0x28C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_USDHC1_VSELECT			0x09C 0x28C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_SAI3_RX_SYNC			0x09C 0x28C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_CSI_DATA19				0x09C 0x28C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_GPIO3_IO20				0x09C 0x28C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13				0x0A0 0x290 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_XBAR_INOUT18			0x0A0 0x290 0x630 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_GPT1_COMPARE1			0x0A0 0x290 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_SAI3_RX_BCLK			0x0A0 0x290 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_CSI_DATA18				0x0A0 0x290 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_GPIO3_IO21				0x0A0 0x290 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_USDHC1_CD_B				0x0A0 0x290 0x5D4 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14				0x0A4 0x294 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_XBAR_INOUT22			0x0A4 0x294 0x638 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_GPT1_COMPARE2			0x0A4 0x294 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_SAI3_TX_DATA			0x0A4 0x294 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_CSI_DATA17				0x0A4 0x294 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_GPIO3_IO22				0x0A4 0x294 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_USDHC1_WP				0x0A4 0x294 0x5D8 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15				0x0A8 0x298 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_XBAR_INOUT23			0x0A8 0x298 0x63C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_GPT1_COMPARE3			0x0A8 0x298 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_SAI3_MCLK				0x0A8 0x298 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_CSI_DATA16				0x0A8 0x298 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_GPIO3_IO23				0x0A8 0x298 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_USDHC2_WP				0x0A8 0x298 0x608 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01				0x0AC 0x29C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_FLEXPWM1_PWM3_A			0x0AC 0x29C 0x454 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_38_LPUART8_TXD				0x0AC 0x29C 0x564 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_38_SAI3_TX_BCLK			0x0AC 0x29C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_CSI_FIELD				0x0AC 0x29C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_GPIO3_IO24				0x0AC 0x29C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_USDHC2_VSELECT			0x0AC 0x29C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS				0x0B0 0x2A0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_FLEXPWM1_PWM3_B			0x0B0 0x2A0 0x464 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_39_LPUART8_RXD				0x0B0 0x2A0 0x560 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_39_SAI3_TX_SYNC			0x0B0 0x2A0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_WDOG1_B				0x0B0 0x2A0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_GPIO3_IO25				0x0B0 0x2A0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_USDHC2_CD_B				0x0B0 0x2A0 0x5E0 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_EMC_40_SEMC_RDY				0x0B4 0x2A4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_GPT2_CAPTURE2			0x0B4 0x2A4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_LPSPI1_PCS2				0x0B4 0x2A4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_USB_OTG2_OC				0x0B4 0x2A4 0x5CC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_40_ENET_MDC				0x0B4 0x2A4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_GPIO3_IO26				0x0B4 0x2A4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_USDHC2_RESET_B			0x0B4 0x2A4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_41_SEMC_CSX0				0x0B8 0x2A8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_GPT2_CAPTURE1			0x0B8 0x2A8 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_LPSPI1_PCS3				0x0B8 0x2A8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_USB_OTG2_PWR			0x0B8 0x2A8 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_ENET_MDIO				0x0B8 0x2A8 0x430 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_41_GPIO3_IO27				0x0B8 0x2A8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_USDHC2_VSELECT			0x0B8 0x2A8 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_FLEXPWM2_PWM3_A			0x0BC 0x2AC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_XBAR_INOUT14			0x0BC 0x2AC 0x644 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_REF_CLK_32K			0x0BC 0x2AC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_USB_OTG2_ID			0x0BC 0x2AC 0x3F8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_LPI2C1_SCLS			0x0BC 0x2AC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_GPIO1_IO00			0x0BC 0x2AC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_USDHC1_RESET_B			0x0BC 0x2AC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_LPSPI3_SCK			0x0BC 0x2AC 0x510 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_FLEXPWM2_PWM3_B			0x0C0 0x2B0 0x484 0x0 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_XBAR_INOUT15			0x0C0 0x2B0 0x648 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_REF_CLK_24M			0x0C0 0x2B0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_USB_OTG1_ID			0x0C0 0x2B0 0x3F4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_LPI2C1_SDAS			0x0C0 0x2B0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_GPIO1_IO01			0x0C0 0x2B0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_EWM_OUT_B				0x0C0 0x2B0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_LPSPI3_SDO			0x0C0 0x2B0 0x518 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_FLEXCAN2_TX			0x0C4 0x2B4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_XBAR_INOUT16			0x0C4 0x2B4 0x64C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPUART6_TXD			0x0C4 0x2B4 0x554 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_USB_OTG1_PWR			0x0C4 0x2B4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_FLEXPWM1_PWM0_X			0x0C4 0x2B4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02			0x0C4 0x2B4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPI2C1_HREQ			0x0C4 0x2B4 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPSPI3_SDI			0x0C4 0x2B4 0x514 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_FLEXCAN2_RX			0x0C8 0x2B8 0x450 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_XBAR_INOUT17			0x0C8 0x2B8 0x62C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_LPUART6_RXD			0x0C8 0x2B8 0x550 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_USB_OTG1_OC			0x0C8 0x2B8 0x5D0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_FLEXPWM1_PWM1_X			0x0C8 0x2B8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_GPIO1_IO03			0x0C8 0x2B8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_REF_CLK_24M			0x0C8 0x2B8 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_LPSPI3_PCS0			0x0C8 0x2B8 0x50C 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_SRC_BOOT_MODE00			0x0CC 0x2BC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_MQS_RIGHT				0x0CC 0x2BC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_ENET_TX_DATA03			0x0CC 0x2BC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_SAI2_TX_SYNC			0x0CC 0x2BC 0x5C4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_CSI_DATA09			0x0CC 0x2BC 0x41C 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_GPIO1_IO04			0x0CC 0x2BC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_PIT_TRIGGER00			0x0CC 0x2BC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_LPSPI3_PCS1			0x0CC 0x2BC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_SRC_BOOT_MODE01			0x0D0 0x2C0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_MQS_LEFT				0x0D0 0x2C0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_ENET_TX_DATA02			0x0D0 0x2C0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_SAI2_TX_BCLK			0x0D0 0x2C0 0x5C0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_CSI_DATA08			0x0D0 0x2C0 0x418 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_GPIO1_IO05			0x0D0 0x2C0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_XBAR_INOUT17			0x0D0 0x2C0 0x62C 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_LPSPI3_PCS2			0x0D0 0x2C0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_JTAG_TMS				0x0D4 0x2C4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_GPT2_COMPARE1			0x0D4 0x2C4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_ENET_RX_CLK			0x0D4 0x2C4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_SAI2_RX_BCLK			0x0D4 0x2C4 0x5B4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_CSI_DATA07			0x0D4 0x2C4 0x414 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_GPIO1_IO06			0x0D4 0x2C4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_XBAR_INOUT18			0x0D4 0x2C4 0x630 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_LPSPI3_PCS3			0x0D4 0x2C4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_JTAG_TCK				0x0D8 0x2C8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_GPT2_COMPARE2			0x0D8 0x2C8 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_ENET_TX_ER			0x0D8 0x2C8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_SAI2_RX_SYNC			0x0D8 0x2C8 0x5BC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_CSI_DATA06			0x0D8 0x2C8 0x410 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_GPIO1_IO07			0x0D8 0x2C8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_XBAR_INOUT19			0x0D8 0x2C8 0x654 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_ENET_1588_EVENT3_OUT		0x0D8 0x2C8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_JTAG_MOD				0x0DC 0x2CC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_GPT2_COMPARE3			0x0DC 0x2CC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_ENET_RX_DATA03			0x0DC 0x2CC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_SAI2_RX_DATA			0x0DC 0x2CC 0x5B8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_CSI_DATA05			0x0DC 0x2CC 0x40C 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_GPIO1_IO08			0x0DC 0x2CC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_XBAR_INOUT20			0x0DC 0x2CC 0x634 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_ENET_1588_EVENT3_IN		0x0DC 0x2CC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_JTAG_TDI				0x0E0 0x2D0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_FLEXPWM2_PWM3_A			0x0E0 0x2D0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_ENET_RX_DATA02			0x0E0 0x2D0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_SAI2_TX_DATA			0x0E0 0x2D0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_CSI_DATA04			0x0E0 0x2D0 0x408 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_GPIO1_IO09			0x0E0 0x2D0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_XBAR_INOUT21			0x0E0 0x2D0 0x658 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_GPT2_CLK				0x0E0 0x2D0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_JTAG_TDO				0x0E4 0x2D4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_FLEXPWM1_PWM3_A			0x0E4 0x2D4 0x454 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_ENET_CRS				0x0E4 0x2D4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_SAI2_MCLK				0x0E4 0x2D4 0x5B0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_CSI_DATA03			0x0E4 0x2D4 0x404 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_GPIO1_IO10			0x0E4 0x2D4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_XBAR_INOUT22			0x0E4 0x2D4 0x638 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_ENET_1588_EVENT0_OUT		0x0E4 0x2D4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_JTAG_TRSTB			0x0E8 0x2D8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_FLEXPWM1_PWM3_B			0x0E8 0x2D8 0x464 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_ENET_COL				0x0E8 0x2D8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_WDOG1_B				0x0E8 0x2D8 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_CSI_DATA02			0x0E8 0x2D8 0x400 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_GPIO1_IO11			0x0E8 0x2D8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_XBAR_INOUT23			0x0E8 0x2D8 0x63C 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_ENET_1588_EVENT0_IN		0x0E8 0x2D8 0x444 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_LPI2C4_SCL			0x0EC 0x2DC 0x4E4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_CCM_PMIC_READY			0x0EC 0x2DC 0x3FC 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD			0x0EC 0x2DC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_WDOG2_B				0x0EC 0x2DC 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_FLEXPWM1_PWM2_X			0x0EC 0x2DC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_GPIO1_IO12			0x0EC 0x2DC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_ENET_1588_EVENT1_OUT		0x0EC 0x2DC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_NMI				0x0EC 0x2DC 0x568 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_LPI2C4_SDA			0x0F0 0x2E0 0x4E8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_GPT1_CLK				0x0F0 0x2E0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD			0x0F0 0x2E0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_EWM_OUT_B				0x0F0 0x2E0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_FLEXPWM1_PWM3_X			0x0F0 0x2E0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_GPIO1_IO13			0x0F0 0x2E0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_ENET_1588_EVENT1_IN		0x0F0 0x2E0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_REF_CLK_24M			0x0F0 0x2E0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_USB_OTG2_OC			0x0F4 0x2E4 0x5CC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_XBAR_INOUT24			0x0F4 0x2E4 0x640 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_LPUART1_CTS_B			0x0F4 0x2E4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_ENET_1588_EVENT0_OUT		0x0F4 0x2E4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_CSI_VSYNC				0x0F4 0x2E4 0x428 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_GPIO1_IO14			0x0F4 0x2E4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX			0x0F4 0x2E4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_USB_OTG2_PWR			0x0F8 0x2E8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_XBAR_INOUT25			0x0F8 0x2E8 0x650 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_LPUART1_RTS_B			0x0F8 0x2E8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_ENET_1588_EVENT0_IN		0x0F8 0x2E8 0x444 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_CSI_HSYNC				0x0F8 0x2E8 0x420 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_GPIO1_IO15			0x0F8 0x2E8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX			0x0F8 0x2E8 0x450 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_WDOG1_WDOG_RST_B_DEB		0x0F8 0x2E8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_USB_OTG2_ID			0x0FC 0x2EC 0x3F8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_TMR3_TIMER0			0x0FC 0x2EC 0x57C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_LPUART2_CTS_B			0x0FC 0x2EC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL			0x0FC 0x2EC 0x4CC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_WDOG1_B				0x0FC 0x2EC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_GPIO1_IO16			0x0FC 0x2EC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_USDHC1_WP				0x0FC 0x2EC 0x5D8 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_KPP_ROW07				0x0FC 0x2EC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_USB_OTG1_PWR			0x100 0x2F0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_TMR3_TIMER1			0x100 0x2F0 0x580 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_LPUART2_RTS_B			0x100 0x2F0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA			0x100 0x2F0 0x4D0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_CCM_PMIC_READY			0x100 0x2F0 0x3FC 0x4 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_GPIO1_IO17			0x100 0x2F0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_USDHC1_VSELECT			0x100 0x2F0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_KPP_COL07				0x100 0x2F0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_USB_OTG1_ID			0x104 0x2F4 0x3F4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_TMR3_TIMER2			0x104 0x2F4 0x584 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_LPUART2_TXD			0x104 0x2F4 0x530 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_SPDIF_OUT				0x104 0x2F4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_ENET_1588_EVENT2_OUT		0x104 0x2F4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_GPIO1_IO18			0x104 0x2F4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_USDHC1_CD_B			0x104 0x2F4 0x5D4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_KPP_ROW06				0x104 0x2F4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_USB_OTG1_OC			0x108 0x2F8 0x5D0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_TMR3_TIMER3			0x108 0x2F8 0x588 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_LPUART2_RXD			0x108 0x2F8 0x52C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_SPDIF_IN				0x108 0x2F8 0x5C8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_ENET_1588_EVENT2_IN		0x108 0x2F8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_GPIO1_IO19			0x108 0x2F8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_USDHC2_CD_B			0x108 0x2F8 0x5E0 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_KPP_COL06				0x108 0x2F8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_FLEXSPI_B_DATA3			0x10C 0x2FC 0x4C4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_ENET_MDC				0x10C 0x2FC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_LPUART3_CTS_B			0x10C 0x2FC 0x534 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_SPDIF_SR_CLK			0x10C 0x2FC 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK			0x10C 0x2FC 0x424 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_GPIO1_IO20			0x10C 0x2FC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_USDHC2_DATA0			0x10C 0x2FC 0x5E8 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_KPP_ROW05				0x10C 0x2FC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_FLEXSPI_B_DATA2			0x110 0x300 0x4C0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_ENET_MDIO				0x110 0x300 0x430 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_LPUART3_RTS_B			0x110 0x300 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_SPDIF_OUT				0x110 0x300 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_CSI_MCLK				0x110 0x300 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_GPIO1_IO21			0x110 0x300 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_USDHC2_DATA1			0x110 0x300 0x5EC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_KPP_COL05				0x110 0x300 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_FLEXSPI_B_DATA1			0x114 0x304 0x4BC 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_LPI2C3_SDA			0x114 0x304 0x4E0 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_LPUART3_TXD			0x114 0x304 0x53C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_SPDIF_LOCK			0x114 0x304 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_CSI_VSYNC				0x114 0x304 0x428 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_GPIO1_IO22			0x114 0x304 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_USDHC2_DATA2			0x114 0x304 0x5F0 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_KPP_ROW04				0x114 0x304 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_FLEXSPI_B_DATA0			0x118 0x308 0x4B8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_LPI2C3_SCL			0x118 0x308 0x4DC 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_LPUART3_RXD			0x118 0x308 0x538 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_SPDIF_EXT_CLK			0x118 0x308 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_CSI_HSYNC				0x118 0x308 0x420 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_GPIO1_IO23			0x118 0x308 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_USDHC2_DATA3			0x118 0x308 0x5F4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_KPP_COL04				0x118 0x308 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXSPI_A_SS1_B			0x11C 0x30C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXPWM4_PWM0_A			0x11C 0x30C 0x494 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXCAN1_TX			0x11C 0x30C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_CCM_PMIC_READY			0x11C 0x30C 0x3FC 0x3 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_CSI_DATA09			0x11C 0x30C 0x41C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_GPIO1_IO24			0x11C 0x30C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_USDHC2_CMD			0x11C 0x30C 0x5E4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_KPP_ROW03				0x11C 0x30C 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXSPI_A_DQS			0x120 0x310 0x4A4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXPWM4_PWM1_A			0x120 0x310 0x498 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXCAN1_RX			0x120 0x310 0x44C 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_SAI1_MCLK				0x120 0x310 0x58C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_CSI_DATA08			0x120 0x310 0x418 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_GPIO1_IO25			0x120 0x310 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_USDHC2_CLK			0x120 0x310 0x5DC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_KPP_COL03				0x120 0x310 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_FLEXSPI_A_DATA3			0x124 0x314 0x4B4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_WDOG1_B				0x124 0x314 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_LPUART8_TXD			0x124 0x314 0x564 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_SAI1_RX_SYNC			0x124 0x314 0x5A4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_CSI_DATA07			0x124 0x314 0x414 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_GPIO1_IO26			0x124 0x314 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_USDHC2_WP				0x124 0x314 0x608 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_KPP_ROW02				0x124 0x314 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_FLEXSPI_A_DATA2			0x128 0x318 0x4B0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_EWM_OUT_B				0x128 0x318 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_LPUART8_RXD			0x128 0x318 0x560 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_SAI1_RX_BCLK			0x128 0x318 0x590 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_CSI_DATA06			0x128 0x318 0x410 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_GPIO1_IO27			0x128 0x318 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_USDHC2_RESET_B			0x128 0x318 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_KPP_COL02				0x128 0x318 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_FLEXSPI_A_DATA1			0x12C 0x31C 0x4AC 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_ACMP1_OUT				0x12C 0x31C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_LPSPI3_PCS0			0x12C 0x31C 0x50C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_SAI1_RX_DATA00			0x12C 0x31C 0x594 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_CSI_DATA05			0x12C 0x31C 0x40C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_GPIO1_IO28			0x12C 0x31C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_USDHC2_DATA4			0x12C 0x31C 0x5F8 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_KPP_ROW01				0x12C 0x31C 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_FLEXSPI_A_DATA0			0x130 0x320 0x4A8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_ACMP2_OUT				0x130 0x320 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_LPSPI3_SDI			0x130 0x320 0x514 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_SAI1_TX_DATA00			0x130 0x320 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_CSI_DATA04			0x130 0x320 0x408 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_GPIO1_IO29			0x130 0x320 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_USDHC2_DATA5			0x130 0x320 0x5FC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_KPP_COL01				0x130 0x320 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_FLEXSPI_A_SCLK			0x134 0x324 0x4C8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_ACMP3_OUT				0x134 0x324 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_LPSPI3_SDO			0x134 0x324 0x518 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_SAI1_TX_BCLK			0x134 0x324 0x5A8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_CSI_DATA03			0x134 0x324 0x404 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_GPIO1_IO30			0x134 0x324 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_USDHC2_DATA6			0x134 0x324 0x600 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_KPP_ROW00				0x134 0x324 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_FLEXSPI_A_SS0_B			0x138 0x328 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_ACMP4_OUT				0x138 0x328 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_LPSPI3_SCK			0x138 0x328 0x510 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_SAI1_TX_SYNC			0x138 0x328 0x5AC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_CSI_DATA02			0x138 0x328 0x400 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_GPIO1_IO31			0x138 0x328 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_USDHC2_DATA7			0x138 0x328 0x604 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_KPP_COL00				0x138 0x328 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK				0x13C 0x32C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_TMR1_TIMER0				0x13C 0x32C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_MQS_RIGHT				0x13C 0x32C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_LPSPI4_PCS0				0x13C 0x32C 0x51C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_FLEXIO2_D00				0x13C 0x32C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_GPIO2_IO00				0x13C 0x32C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_SEMC_CSX1				0x13C 0x32C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE				0x140 0x330 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_TMR1_TIMER1				0x140 0x330 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_MQS_LEFT				0x140 0x330 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_LPSPI4_SDI				0x140 0x330 0x524 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_FLEXIO2_D01				0x140 0x330 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_GPIO2_IO01				0x140 0x330 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_SEMC_CSX2				0x140 0x330 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC				0x144 0x334 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_TMR1_TIMER2				0x144 0x334 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_FLEXCAN1_TX				0x144 0x334 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_LPSPI4_SDO				0x144 0x334 0x528 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_FLEXIO2_D02				0x144 0x334 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_GPIO2_IO02				0x144 0x334 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_SEMC_CSX3				0x144 0x334 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC				0x148 0x338 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_TMR2_TIMER0				0x148 0x338 0x56C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_03_FLEXCAN1_RX				0x148 0x338 0x44C 0x2 0x3
+#define MXRT1050_IOMUXC_GPIO_B0_03_LPSPI4_SCK				0x148 0x338 0x520 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_FLEXIO2_D03				0x148 0x338 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_GPIO2_IO03				0x148 0x338 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_WDOG2_RESET_B_DEB			0x148 0x338 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00				0x14C 0x33C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_TMR2_TIMER1				0x14C 0x33C 0x570 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_04_LPI2C2_SCL				0x14C 0x33C 0x4D4 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_04_ARM_TRACE00				0x14C 0x33C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_FLEXIO2_D04				0x14C 0x33C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_GPIO2_IO04				0x14C 0x33C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_SRC_BT_CFG00				0x14C 0x33C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01				0x150 0x340 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_TMR2_TIMER2				0x150 0x340 0x574 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_05_LPI2C2_SDA				0x150 0x340 0x4D8 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_05_ARM_TRACE01				0x150 0x340 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_FLEXIO2_D05				0x150 0x340 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_GPIO2_IO05				0x150 0x340 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_SRC_BT_CFG01				0x150 0x340 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02				0x154 0x344 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_TMR3_TIMER0				0x154 0x344 0x57C 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_06_FLEXPWM2_PWM0_A			0x154 0x344 0x478 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_06_ARM_TRACE02				0x154 0x344 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_FLEXIO2_D06				0x154 0x344 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_GPIO2_IO06				0x154 0x344 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_SRC_BT_CFG02				0x154 0x344 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03				0x158 0x348 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_TMR3_TIMER1				0x158 0x348 0x580 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_07_FLEXPWM2_PWM0_B			0x158 0x348 0x488 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_07_ARM_TRACE03				0x158 0x348 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_FLEXIO2_D07				0x158 0x348 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_GPIO2_IO07				0x158 0x348 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_SRC_BT_CFG03				0x158 0x348 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04				0x15C 0x34C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_TMR3_TIMER2				0x15C 0x34C 0x584 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_08_FLEXPWM2_PWM1_A			0x15C 0x34C 0x47C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_08_LPUART3_TXD				0x15C 0x34C 0x53C 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_08_FLEXIO2_D08				0x15C 0x34C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_GPIO2_IO08				0x15C 0x34C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_SRC_BT_CFG04				0x15C 0x34C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05				0x160 0x350 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_TMR4_TIMER0				0x160 0x350 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_FLEXPWM2_PWM1_B			0x160 0x350 0x48C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_09_LPUART3_RXD				0x160 0x350 0x538 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_09_FLEXIO2_D09				0x160 0x350 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_GPIO2_IO09				0x160 0x350 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_SRC_BT_CFG05				0x160 0x350 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06				0x164 0x354 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_TMR4_TIMER1				0x164 0x354 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_FLEXPWM2_PWM2_A			0x164 0x354 0x480 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_10_SAI1_TX_DATA03			0x164 0x354 0x598 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_10_FLEXIO2_D10				0x164 0x354 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_GPIO2_IO10				0x164 0x354 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_SRC_BT_CFG06				0x164 0x354 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07				0x168 0x358 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_TMR4_TIMER2				0x168 0x358 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_FLEXPWM2_PWM2_B			0x168 0x358 0x490 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_11_SAI1_TX_DATA02			0x168 0x358 0x59C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_11_FLEXIO2_D11				0x168 0x358 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_GPIO2_IO11				0x168 0x358 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_SRC_BT_CFG07				0x168 0x358 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08				0x16C 0x35C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_XBAR_INOUT10				0x16C 0x35C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_ARM_TRACE_CLK			0x16C 0x35C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_SAI1_TX_DATA01			0x16C 0x35C 0x5A0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_12_FLEXIO2_D12				0x16C 0x35C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_GPIO2_IO12				0x16C 0x35C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_SRC_BT_CFG08				0x16C 0x35C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09				0x170 0x360 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_XBAR_INOUT11				0x170 0x360 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_ARM_TRACE_SWO			0x170 0x360 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_SAI1_MCLK				0x170 0x360 0x58C 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_13_FLEXIO2_D13				0x170 0x360 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_GPIO2_IO13				0x170 0x360 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_SRC_BT_CFG09				0x170 0x360 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10				0x174 0x364 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_XBAR_INOUT12				0x174 0x364 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_ARM_CM7_TXEV				0x174 0x364 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_SAI1_RX_SYNC				0x174 0x364 0x5A4 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_14_FLEXIO2_D14				0x174 0x364 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_GPIO2_IO14				0x174 0x364 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_SRC_BT_CFG10				0x174 0x364 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11				0x178 0x368 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_XBAR_INOUT13				0x178 0x368 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_ARM_CM7_RXEV				0x178 0x368 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_SAI1_RX_BCLK				0x178 0x368 0x590 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_15_FLEXIO2_D15				0x178 0x368 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_GPIO2_IO15				0x178 0x368 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_SRC_BT_CFG11				0x178 0x368 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_00_LCD_DATA12				0x17C 0x36C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_XBAR_INOUT14				0x17C 0x36C 0x644 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_00_LPUART4_TXD				0x17C 0x36C 0x544 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_00_SAI1_RX_DATA00			0x17C 0x36C 0x594 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_00_FLEXIO2_D16				0x17C 0x36C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_GPIO2_IO16				0x17C 0x36C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_FLEXPWM1_PWM3_A			0x17C 0x36C 0x454 0x6 0x4
+
+#define MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13				0x180 0x370 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_XBAR_INOUT15				0x180 0x370 0x648 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_01_LPUART4_RXD				0x180 0x370 0x540 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_01_SAI1_TX_DATA00			0x180 0x370 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_FLEXIO2_D17				0x180 0x370 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_GPIO2_IO17				0x180 0x370 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_FLEXPWM1_PWM3_B			0x180 0x370 0x464 0x6 0x4
+
+#define MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14				0x184 0x374 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_XBAR_INOUT16				0x184 0x374 0x64C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_02_LPSPI4_PCS2				0x184 0x374 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_SAI1_TX_BCLK				0x184 0x374 0x5A8 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_02_FLEXIO2_D18				0x184 0x374 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_GPIO2_IO18				0x184 0x374 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_FLEXPWM2_PWM3_A			0x184 0x374 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15				0x188 0x378 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_XBAR_INOUT17				0x188 0x378 0x62C 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_B1_03_LPSPI4_PCS1				0x188 0x378 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_SAI1_TX_SYNC				0x188 0x378 0x5AC 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_03_FLEXIO2_D19				0x188 0x378 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_GPIO2_IO19				0x188 0x378 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_FLEXPWM2_PWM3_B			0x188 0x378 0x484 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_04_LCD_DATA16				0x18C 0x37C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_LPSPI4_PCS0				0x18C 0x37C 0x51C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_04_CSI_DATA15				0x18C 0x37C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_ENET_RX_DATA00			0x18C 0x37C 0x434 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_04_FLEXIO2_D20				0x18C 0x37C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_GPIO2_IO20				0x18C 0x37C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_05_LCD_DATA17				0x190 0x380 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_LPSPI4_SDI				0x190 0x380 0x524 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_05_CSI_DATA14				0x190 0x380 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_ENET_RX_DATA01			0x190 0x380 0x438 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_05_FLEXIO2_D21				0x190 0x380 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_GPIO2_IO21				0x190 0x380 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_06_LCD_DATA18				0x194 0x384 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_LPSPI4_SDO				0x194 0x384 0x528 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_06_CSI_DATA13				0x194 0x384 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_ENET_RX_EN				0x194 0x384 0x43C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_06_FLEXIO2_D22				0x194 0x384 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_GPIO2_IO22				0x194 0x384 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_07_LCD_DATA19				0x198 0x388 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_LPSPI4_SCK				0x198 0x388 0x520 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_07_CSI_DATA12				0x198 0x388 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_ENET_TX_DATA00			0x198 0x388 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_FLEXIO2_D23				0x198 0x388 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_GPIO2_IO23				0x198 0x388 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_08_LCD_DATA20				0x19C 0x38C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_TMR1_TIMER3				0x19C 0x38C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_CSI_DATA11				0x19C 0x38C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_ENET_TX_DATA01			0x19C 0x38C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_FLEXIO2_D24				0x19C 0x38C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_GPIO2_IO24				0x19C 0x38C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_FLEXCAN2_TX				0x19C 0x38C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_09_LCD_DATA21				0x1A0 0x390 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_TMR2_TIMER3				0x1A0 0x390 0x578 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_09_CSI_DATA10				0x1A0 0x390 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_ENET_TX_EN				0x1A0 0x390 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_FLEXIO2_D25				0x1A0 0x390 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_GPIO2_IO25				0x1A0 0x390 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_FLEXCAN2_RX				0x1A0 0x390 0x450 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_10_LCD_DATA22				0x1A4 0x394 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_TMR3_TIMER3				0x1A4 0x394 0x588 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_10_CSI_DATA00				0x1A4 0x394 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_ENET_TX_CLK				0x1A4 0x394 0x448 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_10_FLEXIO2_D26				0x1A4 0x394 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_GPIO2_IO26				0x1A4 0x394 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_ENET_REF_CLK				0x1A4 0x394 0x42C 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_B1_11_LCD_DATA23				0x1A8 0x398 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_TMR4_TIMER3				0x1A8 0x398 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_CSI_DATA01				0x1A8 0x398 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_ENET_RX_ER				0x1A8 0x398 0x440 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_11_FLEXIO2_D27				0x1A8 0x398 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_GPIO2_IO27				0x1A8 0x398 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_LPSPI4_PCS3				0x1A8 0x398 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_12_LPUART5_TXD				0x1AC 0x39C 0x54C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_12_CSI_PIXCLK				0x1AC 0x39C 0x424 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_12_ENET_1588_EVENT0_IN			0x1AC 0x39C 0x444 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_12_FLEXIO2_D28				0x1AC 0x39C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_12_GPIO2_IO28				0x1AC 0x39C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B				0x1AC 0x39C 0x5D4 0x6 0x2
+
+#define MXRT1050_IOMUXC_GPIO_B1_13_WDOG1_B				0x1B0 0x3A0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_LPUART5_RXD				0x1B0 0x3A0 0x548 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_13_CSI_VSYNC				0x1B0 0x3A0 0x428 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_13_ENET_1588_EVENT0_OUT			0x1B0 0x3A0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_FLEXIO2_D29				0x1B0 0x3A0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_GPIO2_IO29				0x1B0 0x3A0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_USDHC1_WP				0x1B0 0x3A0 0x5D8 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_14_ENET_MDC				0x1B4 0x3A4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_FLEXPWM4_PWM2_A			0x1B4 0x3A4 0x49C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_14_CSI_HSYNC				0x1B4 0x3A4 0x420 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_14_XBAR_INOUT02				0x1B4 0x3A4 0x60C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_14_FLEXIO2_D30				0x1B4 0x3A4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_GPIO2_IO30				0x1B4 0x3A4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT			0x1B4 0x3A4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_15_ENET_MDIO				0x1B8 0x3A8 0x430 0x0 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_15_FLEXPWM4_PWM3_A			0x1B8 0x3A8 0x4A0 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_15_CSI_MCLK				0x1B8 0x3A8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_XBAR_INOUT03				0x1B8 0x3A8 0x610 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_15_FLEXIO2_D31				0x1B8 0x3A8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31				0x1B8 0x3A8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_USDHC1_RESET_B			0x1B8 0x3A8 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD			0x1BC 0x3AC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_FLEXPWM1_PWM0_A			0x1BC 0x3AC 0x458 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_LPI2C3_SCL			0x1BC 0x3AC 0x4DC 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_XBAR_INOUT04			0x1BC 0x3AC 0x614 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_LPSPI1_SCK			0x1BC 0x3AC 0x4F0 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_GPIO3_IO12			0x1BC 0x3AC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_FLEXSPI_A_SS1_B			0x1BC 0x3AC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK			0x1C0 0x3B0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_FLEXPWM1_PWM0_B			0x1C0 0x3B0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_LPI2C3_SDA			0x1C0 0x3B0 0x4E0 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_XBAR_INOUT05			0x1C0 0x3B0 0x618 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_LPSPI1_PCS0			0x1C0 0x3B0 0x4EC 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_GPIO3_IO13			0x1C0 0x3B0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_FLEXSPI_B_SS1_B			0x1C0 0x3B0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0			0x1C4 0x3B4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_FLEXPWM1_PWM1_A			0x1C4 0x3B4 0x45C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_LPUART8_CTS_B			0x1C4 0x3B4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_XBAR_INOUT06			0x1C4 0x3B4 0x61C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_LPSPI1_SDO			0x1C4 0x3B4 0x4F8 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_GPIO3_IO14			0x1C4 0x3B4 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1			0x1C8 0x3B8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_FLEXPWM1_PWM1_B			0x1C8 0x3B8 0x46C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_LPUART8_RTS_B			0x1C8 0x3B8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_XBAR_INOUT07			0x1C8 0x3B8 0x620 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_LPSPI1_SDI			0x1C8 0x3B8 0x4F4 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_GPIO3_IO15			0x1C8 0x3B8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2			0x1CC 0x3BC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_FLEXPWM1_PWM2_A			0x1CC 0x3BC 0x460 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_LPUART8_TXD			0x1CC 0x3BC 0x564 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_XBAR_INOUT08			0x1CC 0x3BC 0x624 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_FLEXSPI_B_SS0_B			0x1CC 0x3BC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_GPIO3_IO16			0x1CC 0x3BC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_CCM_CLKO1				0x1CC 0x3BC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3			0x1D0 0x3C0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_FLEXPWM1_PWM2_B			0x1D0 0x3C0 0x470 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_LPUART8_RXD			0x1D0 0x3C0 0x560 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_XBAR_INOUT09			0x1D0 0x3C0 0x628 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_FLEXSPI_B_DQS			0x1D0 0x3C0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_GPIO3_IO17			0x1D0 0x3C0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_CCM_CLKO2				0x1D0 0x3C0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_USDHC2_DATA3			0x1D4 0x3C4 0x5F4 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_FLEXSPI_B_DATA3			0x1D4 0x3C4 0x4C4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_FLEXPWM1_PWM3_A			0x1D4 0x3C4 0x454 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_SAI1_TX_DATA03			0x1D4 0x3C4 0x598 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_LPUART4_TXD			0x1D4 0x3C4 0x544 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_GPIO3_IO00			0x1D4 0x3C4 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_USDHC2_DATA2			0x1D8 0x3C8 0x5F0 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_FLEXSPI_B_DATA2			0x1D8 0x3C8 0x4C0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_FLEXPWM1_PWM3_B			0x1D8 0x3C8 0x464 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_SAI1_TX_DATA02			0x1D8 0x3C8 0x59C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_LPUART4_RXD			0x1D8 0x3C8 0x540 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_GPIO3_IO01			0x1D8 0x3C8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_USDHC2_DATA1			0x1DC 0x3CC 0x5EC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXSPI_B_DATA1			0x1DC 0x3CC 0x4BC 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXPWM2_PWM3_A			0x1DC 0x3CC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_SAI1_TX_DATA01			0x1DC 0x3CC 0x5A0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXCAN1_TX			0x1DC 0x3CC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_GPIO3_IO02			0x1DC 0x3CC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_CCM_WAIT				0x1DC 0x3CC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_USDHC2_DATA0			0x1E0 0x3D0 0x5E8 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXSPI_B_DATA0			0x1E0 0x3D0 0x4B8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXPWM2_PWM3_B			0x1E0 0x3D0 0x484 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_SAI1_MCLK				0x1E0 0x3D0 0x58C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXCAN1_RX			0x1E0 0x3D0 0x44C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_GPIO3_IO03			0x1E0 0x3D0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_CCM_PMIC_READY			0x1E0 0x3D0 0x3FC 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_USDHC2_CLK			0x1E4 0x3D4 0x5DC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_FLEXSPI_B_SCLK			0x1E4 0x3D4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_LPI2C1_SCL			0x1E4 0x3D4 0x4CC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_SAI1_RX_SYNC			0x1E4 0x3D4 0x5A4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_FLEXCAN1_A_SS1_B			0x1E4 0x3D4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_GPIO3_IO04			0x1E4 0x3D4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_CCM_STOP				0x1E4 0x3D4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_USDHC2_CMD			0x1E8 0x3D8 0x5E4 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_FLEXSPI_A_DQS			0x1E8 0x3D8 0x4A4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_LPI2C1_SDA			0x1E8 0x3D8 0x4D0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_SAI1_RX_BCLK			0x1E8 0x3D8 0x590 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_FLEXCAN1_B_SS0_B			0x1E8 0x3D8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_GPIO3_IO05			0x1E8 0x3D8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_USDHC2_RESET_B			0x1EC 0x3DC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_SS0_B			0x1EC 0x3DC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_LPUART7_CTS_B			0x1EC 0x3DC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_SAI1_RX_DATA00			0x1EC 0x3DC 0x594 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_LPSPI2_PCS0			0x1EC 0x3DC 0x4FC 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_GPIO3_IO06			0x1EC 0x3DC 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_SEMC_CSX1				0x1F0 0x3E0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK			0x1F0 0x3E0 0x4C8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_LPUART7_RTS_B			0x1F0 0x3E0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_SAI1_TX_DATA00			0x1F0 0x3E0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_LPSPI2_SCK			0x1F0 0x3E0 0x500 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_GPIO3_IO07			0x1F0 0x3E0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_CCM_REF_EN_B			0x1F0 0x3E0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_USDHC2_DATA4			0x1F4 0x3E4 0x5F8 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA0			0x1F4 0x3E4 0x4A8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_LPUART7_TXD			0x1F4 0x3E4 0x55C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_SAI1_TX_BLCK			0x1F4 0x3E4 0x5A8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_LPSPI2_SDO			0x1F4 0x3E4 0x508 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_GPIO3_IO08			0x1F4 0x3E4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_SEMC_CSX2				0x1F4 0x3E4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_USDHC2_DATA5			0x1F8 0x3E8 0x5FC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA1			0x1F8 0x3E8 0x4AC 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_LPUART7_RXD			0x1F8 0x3E8 0x558 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_SAI1_TX_SYNC			0x1F8 0x3E8 0x5AC 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_LPSPI2_SDI			0x1F8 0x3E8 0x504 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_GPIO3_IO09			0x1F8 0x3E8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_USDHC2_DATA6			0x1FC 0x3EC 0x600 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA2			0x1FC 0x3EC 0x4B0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPUART2_RXD			0x1FC 0x3EC 0x52C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPI2C2_SDA			0x1FC 0x3EC 0x4D8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPSPI2_PCS2			0x1FC 0x3EC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_GPIO3_IO10			0x1FC 0x3EC 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_USDHC2_DATA7			0x200 0x3F0 0x604 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_DATA3			0x200 0x3F0 0x4B4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPUART2_TXD			0x200 0x3F0 0x530 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPI2C2_SCL			0x200 0x3F0 0x4D4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPSPI2_PCS3			0x200 0x3F0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_GPIO3_IO11			0x200 0x3F0 0x000 0x5 0x0
+
+#endif /* _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi
new file mode 100644
index 000000000000..852861558b47
--- /dev/null
+++ b/arch/arm/boot/dts/imxrt1050.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#include "armv7-m.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/imxrt1050-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	clocks {
+		osc: osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+
+		osc3M: osc3M {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <3000000>;
+		};
+	};
+
+	soc {
+		lpuart1: serial@40184000 {
+			compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart";
+			reg = <0x40184000 0x4000>;
+			interrupts = <20>;
+			clocks = <&clks IMXRT1050_CLK_LPUART1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		iomuxc: pinctrl@401f8000 {
+			compatible = "fsl,imxrt1050-iomuxc";
+			reg = <0x401f8000 0x4000>;
+			fsl,mux_mask = <0x7>;
+		};
+
+		anatop: anatop@400d8000 {
+			compatible = "fsl,imxrt-anatop";
+			reg = <0x400d8000 0x4000>;
+		};
+
+		clks: clock-controller@400fc000 {
+			compatible = "fsl,imxrt1050-ccm";
+			reg = <0x400fc000 0x4000>;
+			interrupts = <95>, <96>;
+			clocks = <&osc>;
+			clock-names = "osc";
+			#clock-cells = <1>;
+			assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL1_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL2_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL3_BYPASS>,
+				<&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>,
+				<&clks IMXRT1050_CLK_PLL2_PFD2_396M>;
+			assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>,
+				<&clks IMXRT1050_CLK_PLL1_ARM>,
+				<&clks IMXRT1050_CLK_PLL2_SYS>,
+				<&clks IMXRT1050_CLK_PLL3_USB_OTG>,
+				<&clks IMXRT1050_CLK_PLL3_USB_OTG>,
+				<&clks IMXRT1050_CLK_PLL2_SYS>;
+		};
+
+		edma1: dma-controller@400e8000 {
+			#dma-cells = <2>;
+			compatible = "fsl,imx7ulp-edma";
+			reg = <0x400e8000 0x4000>,
+				<0x400ec000 0x4000>;
+			dma-channels = <32>;
+			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>,
+				<9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
+			clock-names = "dma", "dmamux0";
+			clocks = <&clks IMXRT1050_CLK_DMA>,
+				 <&clks IMXRT1050_CLK_DMA_MUX>;
+		};
+
+		usdhc1: mmc@402c0000 {
+			compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
+			reg = <0x402c0000 0x4000>;
+			interrupts = <110>;
+			clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
+				<&clks IMXRT1050_CLK_OSC>,
+				<&clks IMXRT1050_CLK_USDHC1>;
+			clock-names = "ipg", "ahb", "per";
+			bus-width = <4>;
+			fsl,wp-controller;
+			no-1-8-v;
+			max-frequency = <200000000>;
+			fsl,tuning-start-tap = <20>;
+			fsl,tuning-step = <2>;
+			status = "disabled";
+		};
+
+		gpio1: gpio@401b8000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x401b8000 0x4000>;
+			interrupts = <80>, <81>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@401bc000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x401bc000 0x4000>;
+			interrupts = <82>, <83>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@401c0000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x401c0000 0x4000>;
+			interrupts = <84>, <85>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@401c4000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x401c4000 0x4000>;
+			interrupts = <86>, <87>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@400c0000 {
+			compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+			reg = <0x400c0000 0x4000>;
+			interrupts = <88>, <89>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpt: timer@401ec000 {
+			compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt";
+			reg = <0x401ec000 0x4000>;
+			interrupts = <100>;
+			clocks = <&osc3M>;
+			clock-names = "per";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imxrt1170-pinfunc.h b/arch/arm/boot/dts/imxrt1170-pinfunc.h
new file mode 100644
index 000000000000..3b9fff2f08e1
--- /dev/null
+++ b/arch/arm/boot/dts/imxrt1170-pinfunc.h
@@ -0,0 +1,1561 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2021
+ * Author(s): Jesse Taube <Mr.Bossman075@gmail.com>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H
+#define _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H
+
+#define IMX_PAD_SION		0x40000000
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define IOMUXC_GPIO_LPSR_00_FLEXCAN3_TX				0x000 0x040 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_00_MIC_CLK				0x000 0x040 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_00_MQS_RIGHT				0x000 0x040 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_00_ARM_CM4_EVENTO			0x000 0x040 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_00_GPIO_MUX6_IO00			0x000 0x040 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_00_LPUART12_TXD			0x000 0x040 0x0B0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_00_SAI4_MCLK				0x000 0x040 0x0C8 0x7 0x0
+#define IOMUXC_GPIO_LPSR_00_GPIO12_IO00				0x000 0x040 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_01_FLEXCAN3_RX				0x004 0x044 0x080 0x0 0x0
+#define IOMUXC_GPIO_LPSR_01_MIC_BITSTREAM0			0x004 0x044 0x0B4 0x1 0x0
+#define IOMUXC_GPIO_LPSR_01_MQS_LEFT				0x004 0x044 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_01_ARM_CM4_EVENTI			0x004 0x044 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_01_GPIO_MUX6_IO01			0x004 0x044 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_01_LPUART12_RXD			0x004 0x044 0x0AC 0x6 0x0
+#define IOMUXC_GPIO_LPSR_01_GPIO12_IO01				0x004 0x044 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_02_GPIO12_IO02				0x008 0x048 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_02_SRC_BOOT_MODE00			0x008 0x048 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_02_LPSPI5_SCK				0x008 0x048 0x098 0x1 0x0
+#define IOMUXC_GPIO_LPSR_02_SAI4_TX_DATA			0x008 0x048 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_02_MQS_RIGHT				0x008 0x048 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_02_GPIO_MUX6_IO02			0x008 0x048 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_LPSR_03_SRC_BOOT_MODE01			0x00C 0x04C 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_03_LPSPI5_PCS0				0x00C 0x04C 0x094 0x1 0x0
+#define IOMUXC_GPIO_LPSR_03_SAI4_TX_SYNC			0x00C 0x04C 0x0DC 0x2 0x0
+#define IOMUXC_GPIO_LPSR_03_MQS_LEFT				0x00C 0x04C 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_03_GPIO_MUX6_IO03			0x00C 0x04C 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_03_GPIO12_IO03				0x00C 0x04C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_04_LPI2C5_SDA				0x010 0x050 0x088 0x0 0x0
+#define IOMUXC_GPIO_LPSR_04_LPSPI5_SOUT				0x010 0x050 0x0A0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_04_SAI4_TX_BCLK			0x010 0x050 0x0D8 0x2 0x0
+#define IOMUXC_GPIO_LPSR_04_LPUART12_RTS_B			0x010 0x050 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_04_GPIO_MUX6_IO04			0x010 0x050 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_04_LPUART11_TXD			0x010 0x050 0x0A8 0x6 0x0
+#define IOMUXC_GPIO_LPSR_04_GPIO12_IO04				0x010 0x050 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_05_GPIO12_IO05				0x014 0x054 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_05_LPI2C5_SCL				0x014 0x054 0x084 0x0 0x0
+#define IOMUXC_GPIO_LPSR_05_LPSPI5_SIN				0x014 0x054 0x09C 0x1 0x0
+#define IOMUXC_GPIO_LPSR_05_SAI4_MCLK				0x014 0x054 0x0C8 0x2 0x1
+#define IOMUXC_GPIO_LPSR_05_LPUART12_CTS_B			0x014 0x054 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_05_GPIO_MUX6_IO05			0x014 0x054 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_05_LPUART11_RXD			0x014 0x054 0x0A4 0x6 0x0
+#define IOMUXC_GPIO_LPSR_05_NMI_GLUE_NMI			0x014 0x054 0x0C4 0x7 0x0
+
+#define IOMUXC_GPIO_LPSR_06_LPI2C6_SDA				0x018 0x058 0x090 0x0 0x0
+#define IOMUXC_GPIO_LPSR_06_SAI4_RX_DATA			0x018 0x058 0x0D0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_06_LPUART12_TXD			0x018 0x058 0x0B0 0x3 0x1
+#define IOMUXC_GPIO_LPSR_06_LPSPI6_PCS3				0x018 0x058 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_06_GPIO_MUX6_IO06			0x018 0x058 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_06_FLEXCAN3_TX				0x018 0x058 0x0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_06_PIT2_TRIGGER3			0x018 0x058 0x0 0x7 0x0
+#define IOMUXC_GPIO_LPSR_06_LPSPI5_PCS1				0x018 0x058 0x0 0x8 0x0
+#define IOMUXC_GPIO_LPSR_06_GPIO12_IO06				0x018 0x058 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_07_LPI2C6_SCL				0x01C 0x05C 0x08C 0x0 0x0
+#define IOMUXC_GPIO_LPSR_07_SAI4_RX_BCLK			0x01C 0x05C 0x0CC 0x2 0x0
+#define IOMUXC_GPIO_LPSR_07_LPUART12_RXD			0x01C 0x05C 0x0AC 0x3 0x1
+#define IOMUXC_GPIO_LPSR_07_LPSPI6_PCS2				0x01C 0x05C 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_07_GPIO_MUX6_IO07			0x01C 0x05C 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_07_FLEXCAN3_RX				0x01C 0x05C 0x080 0x6 0x1
+#define IOMUXC_GPIO_LPSR_07_PIT2_TRIGGER2			0x01C 0x05C 0x0 0x7 0x0
+#define IOMUXC_GPIO_LPSR_07_LPSPI5_PCS2				0x01C 0x05C 0x0 0x8 0x0
+#define IOMUXC_GPIO_LPSR_07_GPIO12_IO07				0x01C 0x05C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_08_GPIO12_IO08				0x020 0x060 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_08_LPUART11_TXD			0x020 0x060 0x0A8 0x0 0x1
+#define IOMUXC_GPIO_LPSR_08_FLEXCAN3_TX				0x020 0x060 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_08_SAI4_RX_SYNC			0x020 0x060 0x0D4 0x2 0x0
+#define IOMUXC_GPIO_LPSR_08_MIC_CLK				0x020 0x060 0x0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_08_LPSPI6_PCS1				0x020 0x060 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_08_GPIO_MUX6_IO08			0x020 0x060 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_08_LPI2C5_SDA				0x020 0x060 0x088 0x6 0x1
+#define IOMUXC_GPIO_LPSR_08_PIT2_TRIGGER1			0x020 0x060 0x0 0x7 0x0
+#define IOMUXC_GPIO_LPSR_08_LPSPI5_PCS3				0x020 0x060 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_LPSR_09_GPIO12_IO09				0x024 0x064 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_09_LPUART11_RXD			0x024 0x064 0x0A4 0x0 0x1
+#define IOMUXC_GPIO_LPSR_09_FLEXCAN3_RX				0x024 0x064 0x080 0x1 0x2
+#define IOMUXC_GPIO_LPSR_09_PIT2_TRIGGER0			0x024 0x064 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_09_MIC_BITSTREAM0			0x024 0x064 0x0B4 0x3 0x1
+#define IOMUXC_GPIO_LPSR_09_LPSPI6_PCS0				0x024 0x064 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_09_GPIO_MUX6_IO09			0x024 0x064 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_09_LPI2C5_SCL				0x024 0x064 0x084 0x6 0x1
+#define IOMUXC_GPIO_LPSR_09_SAI4_TX_DATA			0x024 0x064 0x0 0x7 0x0
+
+#define IOMUXC_GPIO_LPSR_10_GPIO12_IO10				0x028 0x068 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_10_JTAG_MUX_TRSTB			0x028 0x068 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_10_LPUART11_CTS_B			0x028 0x068 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_10_LPI2C6_SDA				0x028 0x068 0x090 0x2 0x1
+#define IOMUXC_GPIO_LPSR_10_MIC_BITSTREAM1			0x028 0x068 0x0B8 0x3 0x0
+#define IOMUXC_GPIO_LPSR_10_LPSPI6_SCK				0x028 0x068 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_10_GPIO_MUX6_IO10			0x028 0x068 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_10_LPI2C5_SCLS				0x028 0x068 0x0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_10_SAI4_TX_SYNC			0x028 0x068 0x0DC 0x7 0x1
+#define IOMUXC_GPIO_LPSR_10_LPUART12_TXD			0x028 0x068 0x0B0 0x8 0x2
+
+#define IOMUXC_GPIO_LPSR_11_JTAG_MUX_TDO			0x02C 0x06C 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_11_LPUART11_RTS_B			0x02C 0x06C 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_11_LPI2C6_SCL				0x02C 0x06C 0x08C 0x2 0x1
+#define IOMUXC_GPIO_LPSR_11_MIC_BITSTREAM2			0x02C 0x06C 0x0BC 0x3 0x0
+#define IOMUXC_GPIO_LPSR_11_LPSPI6_SOUT				0x02C 0x06C 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_11_GPIO_MUX6_IO11			0x02C 0x06C 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_11_LPI2C5_SDAS				0x02C 0x06C 0x0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_11_ARM_TRACE_SWO			0x02C 0x06C 0x0 0x7 0x0
+#define IOMUXC_GPIO_LPSR_11_LPUART12_RXD			0x02C 0x06C 0x0AC 0x8 0x2
+#define IOMUXC_GPIO_LPSR_11_GPIO12_IO11				0x02C 0x06C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_12_GPIO12_IO12				0x030 0x070 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_12_JTAG_MUX_TDI			0x030 0x070 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_12_PIT2_TRIGGER0			0x030 0x070 0x0 0x1 0x0
+#define IOMUXC_GPIO_LPSR_12_MIC_BITSTREAM3			0x030 0x070 0x0C0 0x3 0x0
+#define IOMUXC_GPIO_LPSR_12_LPSPI6_SIN				0x030 0x070 0x0 0x4 0x0
+#define IOMUXC_GPIO_LPSR_12_GPIO_MUX6_IO12			0x030 0x070 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_12_LPI2C5_HREQ				0x030 0x070 0x0 0x6 0x0
+#define IOMUXC_GPIO_LPSR_12_SAI4_TX_BCLK			0x030 0x070 0x0D8 0x7 0x1
+#define IOMUXC_GPIO_LPSR_12_LPSPI5_SCK				0x030 0x070 0x098 0x8 0x1
+
+#define IOMUXC_GPIO_LPSR_13_GPIO12_IO13				0x034 0x074 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_13_JTAG_MUX_MOD			0x034 0x074 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_13_MIC_BITSTREAM1			0x034 0x074 0x0B8 0x1 0x1
+#define IOMUXC_GPIO_LPSR_13_PIT2_TRIGGER1			0x034 0x074 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_13_GPIO_MUX6_IO13			0x034 0x074 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_13_SAI4_RX_DATA			0x034 0x074 0x0D0 0x7 0x1
+#define IOMUXC_GPIO_LPSR_13_LPSPI5_PCS0				0x034 0x074 0x094 0x8 0x1
+
+#define IOMUXC_GPIO_LPSR_14_JTAG_MUX_TCK			0x038 0x078 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_14_MIC_BITSTREAM2			0x038 0x078 0x0BC 0x1 0x1
+#define IOMUXC_GPIO_LPSR_14_PIT2_TRIGGER2			0x038 0x078 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_14_GPIO_MUX6_IO14			0x038 0x078 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_14_SAI4_RX_BCLK			0x038 0x078 0x0CC 0x7 0x1
+#define IOMUXC_GPIO_LPSR_14_LPSPI5_SOUT				0x038 0x078 0x0A0 0x8 0x1
+#define IOMUXC_GPIO_LPSR_14_GPIO12_IO14				0x038 0x078 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_LPSR_15_GPIO12_IO15				0x03C 0x07C 0x0 0xA 0x0
+#define IOMUXC_GPIO_LPSR_15_JTAG_MUX_TMS			0x03C 0x07C 0x0 0x0 0x0
+#define IOMUXC_GPIO_LPSR_15_MIC_BITSTREAM3			0x03C 0x07C 0x0C0 0x1 0x1
+#define IOMUXC_GPIO_LPSR_15_PIT2_TRIGGER3			0x03C 0x07C 0x0 0x2 0x0
+#define IOMUXC_GPIO_LPSR_15_GPIO_MUX6_IO15			0x03C 0x07C 0x0 0x5 0x0
+#define IOMUXC_GPIO_LPSR_15_SAI4_RX_SYNC			0x03C 0x07C 0x0D4 0x7 0x1
+#define IOMUXC_GPIO_LPSR_15_LPSPI5_SIN				0x03C 0x07C 0x09C 0x8 0x1
+
+#define IOMUXC_WAKEUP_DIG_GPIO13_IO00				0x40C94000 0x40C94040 0x0 0x5 0x0
+#define IOMUXC_WAKEUP_DIG_NMI_GLUE_NMI				0x40C94000 0x40C94040 0x0C4 0x7 0x1
+
+#define IOMUXC_PMIC_ON_REQ_DIG_SNVS_LP_PMIC_ON_REQ		0x40C94004 0x40C94044 0x0 0x0 0x0
+#define IOMUXC_PMIC_ON_REQ_DIG_GPIO13_IO01			0x40C94004 0x40C94044 0x0 0x5 0x0
+
+#define IOMUXC_PMIC_STBY_REQ_DIG_CCM_PMIC_VSTBY_REQ		0x40C94008 0x40C94048 0x0 0x0 0x0
+#define IOMUXC_PMIC_STBY_REQ_DIG_GPIO13_IO02			0x40C94008 0x40C94048 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_00_DIG_SNVS_TAMPER0			0x40C9400C 0x40C9404C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_00_DIG_GPIO13_IO03			0x40C9400C 0x40C9404C 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_01_DIG_SNVS_TAMPER1			0x40C94010 0x40C94050 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_01_DIG_GPIO13_IO04			0x40C94010 0x40C94050 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_02_DIG_SNVS_TAMPER2			0x40C94014 0x40C94054 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_02_DIG_GPIO13_IO05			0x40C94014 0x40C94054 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_03_DIG_SNVS_TAMPER3			0x40C94018 0x40C94058 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_03_DIG_GPIO13_IO06			0x40C94018 0x40C94058 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_04_DIG_SNVS_TAMPER4			0x40C9401C 0x40C9405C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_04_DIG_GPIO13_IO07			0x40C9401C 0x40C9405C 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_05_DIG_SNVS_TAMPER5			0x40C94020 0x40C94060 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_05_DIG_GPIO13_IO08			0x40C94020 0x40C94060 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_06_DIG_SNVS_TAMPER6			0x40C94024 0x40C94064 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_06_DIG_GPIO13_IO09			0x40C94024 0x40C94064 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_07_DIG_SNVS_TAMPER7			0x40C94028 0x40C94068 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_07_DIG_GPIO13_IO10			0x40C94028 0x40C94068 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_08_DIG_SNVS_TAMPER8			0x40C9402C 0x40C9406C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_08_DIG_GPIO13_IO11			0x40C9402C 0x40C9406C 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SNVS_09_DIG_SNVS_TAMPER9			0x40C94030 0x40C94070 0x0 0x0 0x0
+#define IOMUXC_GPIO_SNVS_09_DIG_GPIO13_IO12			0x40C94030 0x40C94070 0x0 0x5 0x0
+
+#define IOMUXC_TEST_MODE_DIG					0x0 0x40C94034 0x0 0x0 0x0
+
+#define IOMUXC_POR_B_DIG					0x0 0x40C94038 0x0 0x0 0x0
+
+#define IOMUXC_ONOFF_DIG					0x0 0x40C9403C 0x0 0x0 0x0
+
+#define IOMUXC_GPIO_EMC_B1_00_SEMC_DATA00			0x010 0x254 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_00_FLEXPWM4_PWM0_A			0x010 0x254 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_00_GPIO_MUX1_IO00			0x010 0x254 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_00_FLEXIO1_D00			0x010 0x254 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_00_GPIO7_IO00			0x010 0x254 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_01_GPIO7_IO01			0x014 0x258 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_01_SEMC_DATA01			0x014 0x258 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_01_FLEXPWM4_PWM0_B			0x014 0x258 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_01_GPIO_MUX1_IO01			0x014 0x258 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_01_FLEXIO1_D01			0x014 0x258 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_02_SEMC_DATA02			0x018 0x25C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_02_FLEXPWM4_PWM1_A			0x018 0x25C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_02_GPIO_MUX1_IO02			0x018 0x25C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_02_FLEXIO1_D02			0x018 0x25C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_02_GPIO7_IO02			0x018 0x25C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_03_SEMC_DATA03			0x01C 0x260 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_03_FLEXPWM4_PWM1_B			0x01C 0x260 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_03_GPIO_MUX1_IO03			0x01C 0x260 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_03_FLEXIO1_D03			0x01C 0x260 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_03_GPIO7_IO03			0x01C 0x260 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_04_GPIO7_IO04			0x020 0x264 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_04_SEMC_DATA04			0x020 0x264 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_04_FLEXPWM4_PWM2_A			0x020 0x264 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_04_GPIO_MUX1_IO04			0x020 0x264 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_04_FLEXIO1_D04			0x020 0x264 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_05_SEMC_DATA05			0x024 0x268 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_05_FLEXPWM4_PWM2_B			0x024 0x268 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_05_GPIO_MUX1_IO05			0x024 0x268 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_05_FLEXIO1_D05			0x024 0x268 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_05_GPIO7_IO05			0x024 0x268 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_06_SEMC_DATA06			0x028 0x26C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_06_FLEXPWM2_PWM0_A			0x028 0x26C 0x518 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_06_GPIO_MUX1_IO06			0x028 0x26C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_06_FLEXIO1_D06			0x028 0x26C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_06_GPIO7_IO06			0x028 0x26C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_07_GPIO7_IO07			0x02C 0x270 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_07_SEMC_DATA07			0x02C 0x270 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_07_FLEXPWM2_PWM0_B			0x02C 0x270 0x524 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_07_GPIO_MUX1_IO07			0x02C 0x270 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_07_FLEXIO1_D07			0x02C 0x270 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_08_SEMC_DM00				0x030 0x274 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_08_FLEXPWM2_PWM1_A			0x030 0x274 0x51C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_08_GPIO_MUX1_IO08			0x030 0x274 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_08_FLEXIO1_D08			0x030 0x274 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_08_GPIO7_IO08			0x030 0x274 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_09_SEMC_ADDR00			0x034 0x278 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_09_FLEXPWM2_PWM1_B			0x034 0x278 0x528 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_09_GPT5_CAPTURE1			0x034 0x278 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_09_GPIO_MUX1_IO09			0x034 0x278 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_09_FLEXIO1_D09			0x034 0x278 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_09_GPIO7_IO09			0x034 0x278 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_10_SEMC_ADDR01			0x038 0x27C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_10_FLEXPWM2_PWM2_A			0x038 0x27C 0x520 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_10_GPT5_CAPTURE2			0x038 0x27C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_10_GPIO_MUX1_IO10			0x038 0x27C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_10_FLEXIO1_D10			0x038 0x27C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_10_GPIO7_IO10			0x038 0x27C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_11_GPIO7_IO11			0x03C 0x280 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_11_SEMC_ADDR02			0x03C 0x280 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_11_FLEXPWM2_PWM2_B			0x03C 0x280 0x52C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_11_GPT5_COMPARE1			0x03C 0x280 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_11_GPIO_MUX1_IO11			0x03C 0x280 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_11_FLEXIO1_D11			0x03C 0x280 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_12_SEMC_ADDR03			0x040 0x284 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_12_XBAR1_INOUT04			0x040 0x284 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_12_GPT5_COMPARE2			0x040 0x284 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_12_GPIO_MUX1_IO12			0x040 0x284 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_12_FLEXIO1_D12			0x040 0x284 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_12_GPIO7_IO12			0x040 0x284 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_13_SEMC_ADDR04			0x044 0x288 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_13_XBAR1_INOUT05			0x044 0x288 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_13_GPT5_COMPARE3			0x044 0x288 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_13_GPIO_MUX1_IO13			0x044 0x288 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_13_FLEXIO1_D13			0x044 0x288 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_13_GPIO7_IO13			0x044 0x288 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_14_GPIO7_IO14			0x048 0x28C 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_14_SEMC_ADDR05			0x048 0x28C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_14_XBAR1_INOUT06			0x048 0x28C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_14_GPT5_CLK				0x048 0x28C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_14_GPIO_MUX1_IO14			0x048 0x28C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_14_FLEXIO1_D14			0x048 0x28C 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_15_SEMC_ADDR06			0x04C 0x290 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_15_XBAR1_INOUT07			0x04C 0x290 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_15_GPIO_MUX1_IO15			0x04C 0x290 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_15_FLEXIO1_D15			0x04C 0x290 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_15_GPIO7_IO15			0x04C 0x290 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_16_SEMC_ADDR07			0x050 0x294 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_16_XBAR1_INOUT08			0x050 0x294 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_16_GPIO_MUX1_IO16			0x050 0x294 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_16_FLEXIO1_D16			0x050 0x294 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_16_GPIO7_IO16			0x050 0x294 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_17_GPIO7_IO17			0x054 0x298 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_17_SEMC_ADDR08			0x054 0x298 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_17_FLEXPWM4_PWM3_A			0x054 0x298 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_17_TMR1_TIMER0			0x054 0x298 0x63C 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_17_GPIO_MUX1_IO17			0x054 0x298 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_17_FLEXIO1_D17			0x054 0x298 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_18_SEMC_ADDR09			0x058 0x29C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_18_FLEXPWM4_PWM3_B			0x058 0x29C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_18_TMR2_TIMER0			0x058 0x29C 0x648 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_18_GPIO_MUX1_IO18			0x058 0x29C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_18_FLEXIO1_D18			0x058 0x29C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_18_GPIO7_IO18			0x058 0x29C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_19_SEMC_ADDR11			0x05C 0x2A0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_19_FLEXPWM2_PWM3_A			0x05C 0x2A0 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_19_TMR3_TIMER0			0x05C 0x2A0 0x654 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_19_GPIO_MUX1_IO19			0x05C 0x2A0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_19_FLEXIO1_D19			0x05C 0x2A0 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_19_GPIO7_IO19			0x05C 0x2A0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_20_SEMC_ADDR12			0x060 0x2A4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_20_FLEXPWM2_PWM3_B			0x060 0x2A4 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_20_TMR4_TIMER0			0x060 0x2A4 0x660 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_20_GPIO_MUX1_IO20			0x060 0x2A4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_20_FLEXIO1_D20			0x060 0x2A4 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_20_GPIO7_IO20			0x060 0x2A4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_21_GPIO7_IO21			0x064 0x2A8 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_21_SEMC_BA0				0x064 0x2A8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_21_FLEXPWM3_PWM3_A			0x064 0x2A8 0x53C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_21_GPIO_MUX1_IO21			0x064 0x2A8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_21_FLEXIO1_D21			0x064 0x2A8 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_22_GPIO7_IO22			0x068 0x2AC 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_22_SEMC_BA1				0x068 0x2AC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_22_FLEXPWM3_PWM3_B			0x068 0x2AC 0x54C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_22_GPIO_MUX1_IO22			0x068 0x2AC 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_22_FLEXIO1_D22			0x068 0x2AC 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_23_SEMC_ADDR10			0x06C 0x2B0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_23_FLEXPWM1_PWM0_A			0x06C 0x2B0 0x500 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_23_GPIO_MUX1_IO23			0x06C 0x2B0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_23_FLEXIO1_D23			0x06C 0x2B0 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_23_GPIO7_IO23			0x06C 0x2B0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_24_GPIO7_IO24			0x070 0x2B4 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_24_SEMC_CAS				0x070 0x2B4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_24_FLEXPWM1_PWM0_B			0x070 0x2B4 0x50C 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_24_GPIO_MUX1_IO24			0x070 0x2B4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_24_FLEXIO1_D24			0x070 0x2B4 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_25_GPIO7_IO25			0x074 0x2B8 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_25_SEMC_RAS				0x074 0x2B8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_25_FLEXPWM1_PWM1_A			0x074 0x2B8 0x504 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_25_GPIO_MUX1_IO25			0x074 0x2B8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_25_FLEXIO1_D25			0x074 0x2B8 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_26_SEMC_CLK				0x078 0x2BC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_26_FLEXPWM1_PWM1_B			0x078 0x2BC 0x510 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_26_GPIO_MUX1_IO26			0x078 0x2BC 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_26_FLEXIO1_D26			0x078 0x2BC 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_26_GPIO7_IO26			0x078 0x2BC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_27_GPIO7_IO27			0x07C 0x2C0 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_27_SEMC_CKE				0x07C 0x2C0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_27_FLEXPWM1_PWM2_A			0x07C 0x2C0 0x508 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_27_GPIO_MUX1_IO27			0x07C 0x2C0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_27_FLEXIO1_D27			0x07C 0x2C0 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_28_GPIO7_IO28			0x080 0x2C4 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_28_SEMC_WE				0x080 0x2C4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_28_FLEXPWM1_PWM2_B			0x080 0x2C4 0x514 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_28_GPIO_MUX1_IO28			0x080 0x2C4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_28_FLEXIO1_D28			0x080 0x2C4 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_29_SEMC_CS0				0x084 0x2C8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_29_FLEXPWM3_PWM0_A			0x084 0x2C8 0x530 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_29_GPIO_MUX1_IO29			0x084 0x2C8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_29_FLEXIO1_D29			0x084 0x2C8 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_29_GPIO7_IO29			0x084 0x2C8 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_30_SEMC_DATA08			0x088 0x2CC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_30_FLEXPWM3_PWM0_B			0x088 0x2CC 0x540 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_30_GPIO_MUX1_IO30			0x088 0x2CC 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_30_FLEXIO1_D30			0x088 0x2CC 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B1_30_GPIO7_IO30			0x088 0x2CC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_31_GPIO7_IO31			0x08C 0x2D0 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_31_SEMC_DATA09			0x08C 0x2D0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_31_FLEXPWM3_PWM1_A			0x08C 0x2D0 0x534 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_31_GPIO_MUX1_IO31			0x08C 0x2D0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_31_FLEXIO1_D31			0x08C 0x2D0 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_EMC_B1_32_GPIO8_IO00			0x090 0x2D4 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_32_SEMC_DATA10			0x090 0x2D4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_32_FLEXPWM3_PWM1_B			0x090 0x2D4 0x544 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_32_GPIO_MUX2_IO00			0x090 0x2D4 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_33_SEMC_DATA11			0x094 0x2D8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_33_FLEXPWM3_PWM2_A			0x094 0x2D8 0x538 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_33_GPIO_MUX2_IO01			0x094 0x2D8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_33_GPIO8_IO01			0x094 0x2D8 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_34_GPIO8_IO02			0x098 0x2DC 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_34_SEMC_DATA12			0x098 0x2DC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_34_FLEXPWM3_PWM2_B			0x098 0x2DC 0x548 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_34_GPIO_MUX2_IO02			0x098 0x2DC 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_35_GPIO8_IO03			0x09C 0x2E0 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_35_SEMC_DATA13			0x09C 0x2E0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_35_XBAR1_INOUT09			0x09C 0x2E0 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_35_GPIO_MUX2_IO03			0x09C 0x2E0 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_36_SEMC_DATA14			0x0A0 0x2E4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_36_XBAR1_INOUT10			0x0A0 0x2E4 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_36_GPIO_MUX2_IO04			0x0A0 0x2E4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_36_GPIO8_IO04			0x0A0 0x2E4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_37_GPIO8_IO05			0x0A4 0x2E8 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_37_SEMC_DATA15			0x0A4 0x2E8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_37_XBAR1_INOUT11			0x0A4 0x2E8 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_37_GPIO_MUX2_IO05			0x0A4 0x2E8 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_38_GPIO8_IO06			0x0A8 0x2EC 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_38_SEMC_DM01				0x0A8 0x2EC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_38_FLEXPWM1_PWM3_A			0x0A8 0x2EC 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_38_TMR1_TIMER1			0x0A8 0x2EC 0x640 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_38_GPIO_MUX2_IO06			0x0A8 0x2EC 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_EMC_B1_39_SEMC_DQS				0x0AC 0x2F0 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_39_FLEXPWM1_PWM3_B			0x0AC 0x2F0 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_39_TMR2_TIMER1			0x0AC 0x2F0 0x64C 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_39_GPIO_MUX2_IO07			0x0AC 0x2F0 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_39_GPIO8_IO07			0x0AC 0x2F0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_40_SEMC_RDY				0x0B0 0x2F4 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_40_XBAR1_INOUT12			0x0B0 0x2F4 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_40_MQS_RIGHT				0x0B0 0x2F4 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_40_LPUART6_TXD			0x0B0 0x2F4 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B1_40_GPIO_MUX2_IO08			0x0B0 0x2F4 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_40_ENET_1G_MDC			0x0B0 0x2F4 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B1_40_CCM_CLKO1				0x0B0 0x2F4 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B1_40_GPIO8_IO08			0x0B0 0x2F4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B1_41_GPIO8_IO09			0x0B4 0x2F8 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B1_41_SEMC_CSX00			0x0B4 0x2F8 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B1_41_XBAR1_INOUT13			0x0B4 0x2F8 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B1_41_MQS_LEFT				0x0B4 0x2F8 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B1_41_LPUART6_RXD			0x0B4 0x2F8 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B1_41_FLEXSPI2_B_DATA07			0x0B4 0x2F8 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B1_41_GPIO_MUX2_IO09			0x0B4 0x2F8 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B1_41_ENET_1G_MDIO			0x0B4 0x2F8 0x4C8 0x7 0x0
+#define IOMUXC_GPIO_EMC_B1_41_CCM_CLKO2				0x0B4 0x2F8 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_EMC_B2_00_SEMC_DATA16			0x0B8 0x2FC 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_00_CCM_ENET_REF_CLK_25M		0x0B8 0x2FC 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_00_TMR3_TIMER1			0x0B8 0x2FC 0x658 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_00_LPUART6_CTS_B			0x0B8 0x2FC 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_00_FLEXSPI2_B_DATA06			0x0B8 0x2FC 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_00_GPIO_MUX2_IO10			0x0B8 0x2FC 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_00_XBAR1_INOUT20			0x0B8 0x2FC 0x6D8 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_00_ENET_QOS_1588_EVENT1_OUT		0x0B8 0x2FC 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_00_LPSPI1_SCK			0x0B8 0x2FC 0x5D0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_00_LPI2C2_SCL			0x0B8 0x2FC 0x5B4 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_00_GPIO8_IO10			0x0B8 0x2FC 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_00_FLEXPWM3_PWM0_A			0x0B8 0x2FC 0x530 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_01_SEMC_DATA17			0x0BC 0x300 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_01_USDHC2_CD_B			0x0BC 0x300 0x6D0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_01_TMR4_TIMER1			0x0BC 0x300 0x664 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_01_LPUART6_RTS_B			0x0BC 0x300 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_01_FLEXSPI2_B_DATA05			0x0BC 0x300 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_01_GPIO_MUX2_IO11			0x0BC 0x300 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_01_XBAR1_INOUT21			0x0BC 0x300 0x6DC 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_01_ENET_QOS_1588_EVENT1_IN		0x0BC 0x300 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_01_LPSPI1_PCS0			0x0BC 0x300 0x5CC 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_01_LPI2C2_SDA			0x0BC 0x300 0x5B8 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_01_GPIO8_IO11			0x0BC 0x300 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_01_FLEXPWM3_PWM0_B			0x0BC 0x300 0x540 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_02_SEMC_DATA18			0x0C0 0x304 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_02_USDHC2_WP				0x0C0 0x304 0x6D4 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_02_VIDEO_MUX_CSI_DATA23		0x0C0 0x304 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_02_FLEXSPI2_B_DATA04			0x0C0 0x304 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_02_GPIO_MUX2_IO12			0x0C0 0x304 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_02_XBAR1_INOUT22			0x0C0 0x304 0x6E0 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_02_ENET_QOS_1588_EVENT1_AUX_IN	0x0C0 0x304 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_02_LPSPI1_SOUT			0x0C0 0x304 0x5D8 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_02_GPIO8_IO12			0x0C0 0x304 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_02_FLEXPWM3_PWM1_A			0x0C0 0x304 0x534 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_03_SEMC_DATA19			0x0C4 0x308 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_03_USDHC2_VSELECT			0x0C4 0x308 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_03_VIDEO_MUX_CSI_DATA22		0x0C4 0x308 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_03_FLEXSPI2_B_DATA03			0x0C4 0x308 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_03_GPIO_MUX2_IO13			0x0C4 0x308 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_03_XBAR1_INOUT23			0x0C4 0x308 0x6E4 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_03_ENET_1G_TX_DATA03			0x0C4 0x308 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_03_LPSPI1_SIN			0x0C4 0x308 0x5D4 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_03_GPIO8_IO13			0x0C4 0x308 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_03_FLEXPWM3_PWM1_B			0x0C4 0x308 0x544 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_04_SEMC_DATA20			0x0C8 0x30C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_04_USDHC2_RESET_B			0x0C8 0x30C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_04_SAI2_MCLK				0x0C8 0x30C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_04_VIDEO_MUX_CSI_DATA21		0x0C8 0x30C 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_04_FLEXSPI2_B_DATA02			0x0C8 0x30C 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_04_GPIO_MUX2_IO14			0x0C8 0x30C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_04_XBAR1_INOUT24			0x0C8 0x30C 0x6E8 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_04_ENET_1G_TX_DATA02			0x0C8 0x30C 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_04_LPSPI3_SCK			0x0C8 0x30C 0x600 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_04_GPIO8_IO14			0x0C8 0x30C 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_04_FLEXPWM3_PWM2_A			0x0C8 0x30C 0x538 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_05_SEMC_DATA21			0x0CC 0x310 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_05_GPT3_CLK				0x0CC 0x310 0x598 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_05_SAI2_RX_SYNC			0x0CC 0x310 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_05_VIDEO_MUX_CSI_DATA20		0x0CC 0x310 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_05_FLEXSPI2_B_DATA01			0x0CC 0x310 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_05_GPIO_MUX2_IO15			0x0CC 0x310 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_05_XBAR1_INOUT25			0x0CC 0x310 0x6EC 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_05_ENET_1G_RX_CLK			0x0CC 0x310 0x4CC 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_05_LPSPI3_PCS0			0x0CC 0x310 0x5F0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_05_PIT1_TRIGGER0			0x0CC 0x310 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_05_GPIO8_IO15			0x0CC 0x310 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_05_FLEXPWM3_PWM2_B			0x0CC 0x310 0x548 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_06_SEMC_DATA22			0x0D0 0x314 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_06_GPT3_CAPTURE1			0x0D0 0x314 0x590 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_06_GPIO8_IO16			0x0D0 0x314 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_06_SAI2_RX_BCLK			0x0D0 0x314 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_06_FLEXPWM3_PWM3_A			0x0D0 0x314 0x53C 0xB 0x1
+#define IOMUXC_GPIO_EMC_B2_06_VIDEO_MUX_CSI_DATA19		0x0D0 0x314 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_06_FLEXSPI2_B_DATA00			0x0D0 0x314 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_06_GPIO_MUX2_IO16			0x0D0 0x314 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_06_XBAR1_INOUT26			0x0D0 0x314 0x6F0 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_06_ENET_1G_TX_ER			0x0D0 0x314 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_06_LPSPI3_SOUT			0x0D0 0x314 0x608 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_06_PIT1_TRIGGER1			0x0D0 0x314 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_EMC_B2_07_SEMC_DATA23			0x0D4 0x318 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_07_GPT3_CAPTURE2			0x0D4 0x318 0x594 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_07_SAI2_RX_DATA			0x0D4 0x318 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_07_VIDEO_MUX_CSI_DATA18		0x0D4 0x318 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_07_FLEXSPI2_B_DQS			0x0D4 0x318 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_07_GPIO_MUX2_IO17			0x0D4 0x318 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_07_XBAR1_INOUT27			0x0D4 0x318 0x6F4 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_07_ENET_1G_RX_DATA03			0x0D4 0x318 0x4DC 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_07_LPSPI3_SIN			0x0D4 0x318 0x604 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_07_PIT1_TRIGGER2			0x0D4 0x318 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_07_GPIO8_IO17			0x0D4 0x318 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_07_FLEXPWM3_PWM3_B			0x0D4 0x318 0x54C 0xB 0x1
+
+#define IOMUXC_GPIO_EMC_B2_08_SEMC_DM02				0x0D8 0x31C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_08_GPT3_COMPARE1			0x0D8 0x31C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_08_SAI2_TX_DATA			0x0D8 0x31C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_08_VIDEO_MUX_CSI_DATA17		0x0D8 0x31C 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_08_FLEXSPI2_B_SS0_B			0x0D8 0x31C 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_08_GPIO_MUX2_IO18			0x0D8 0x31C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_08_XBAR1_INOUT28			0x0D8 0x31C 0x6F8 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_08_ENET_1G_RX_DATA02			0x0D8 0x31C 0x4D8 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_08_LPSPI3_PCS1			0x0D8 0x31C 0x5F4 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_08_PIT1_TRIGGER3			0x0D8 0x31C 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_08_GPIO8_IO18			0x0D8 0x31C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_09_GPIO8_IO19			0x0DC 0x320 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_09_SEMC_DATA24			0x0DC 0x320 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_09_GPT3_COMPARE2			0x0DC 0x320 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_09_SAI2_TX_BCLK			0x0DC 0x320 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_09_VIDEO_MUX_CSI_DATA16		0x0DC 0x320 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_09_FLEXSPI2_B_SCLK			0x0DC 0x320 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_09_GPIO_MUX2_IO19			0x0DC 0x320 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_09_XBAR1_INOUT29			0x0DC 0x320 0x6FC 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_09_ENET_1G_CRS			0x0DC 0x320 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_09_LPSPI3_PCS2			0x0DC 0x320 0x5F8 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_09_TMR1_TIMER0			0x0DC 0x320 0x63C 0x9 0x1
+
+#define IOMUXC_GPIO_EMC_B2_10_GPIO8_IO20			0x0E0 0x324 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_10_SEMC_DATA25			0x0E0 0x324 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_10_GPT3_COMPARE3			0x0E0 0x324 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_10_SAI2_TX_SYNC			0x0E0 0x324 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_10_VIDEO_MUX_CSI_FIELD		0x0E0 0x324 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_10_FLEXSPI2_A_SCLK			0x0E0 0x324 0x58C 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_10_GPIO_MUX2_IO20			0x0E0 0x324 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_10_XBAR1_INOUT30			0x0E0 0x324 0x700 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_10_ENET_1G_COL			0x0E0 0x324 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_10_LPSPI3_PCS3			0x0E0 0x324 0x5FC 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_10_TMR1_TIMER1			0x0E0 0x324 0x640 0x9 0x1
+
+#define IOMUXC_GPIO_EMC_B2_11_SEMC_DATA26			0x0E4 0x328 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_11_SPDIF_IN				0x0E4 0x328 0x6B4 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_11_ENET_1G_TX_DATA00			0x0E4 0x328 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_11_SAI3_RX_SYNC			0x0E4 0x328 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_11_FLEXSPI2_A_SS0_B			0x0E4 0x328 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_11_GPIO_MUX2_IO21			0x0E4 0x328 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_11_XBAR1_INOUT31			0x0E4 0x328 0x704 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_11_EMVSIM1_IO			0x0E4 0x328 0x69C 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_11_TMR1_TIMER2			0x0E4 0x328 0x644 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_11_GPIO8_IO21			0x0E4 0x328 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_12_SEMC_DATA27			0x0E8 0x32C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_12_SPDIF_OUT				0x0E8 0x32C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_12_ENET_1G_TX_DATA01			0x0E8 0x32C 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_12_SAI3_RX_BCLK			0x0E8 0x32C 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_12_FLEXSPI2_A_DQS			0x0E8 0x32C 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_12_GPIO_MUX2_IO22			0x0E8 0x32C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_12_XBAR1_INOUT32			0x0E8 0x32C 0x708 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_12_EMVSIM1_CLK			0x0E8 0x32C 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_12_TMR1_TIMER3			0x0E8 0x32C 0x0 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_12_GPIO8_IO22			0x0E8 0x32C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_13_GPIO8_IO23			0x0EC 0x330 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_13_SEMC_DATA28			0x0EC 0x330 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_13_ENET_1G_TX_EN			0x0EC 0x330 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_13_SAI3_RX_DATA			0x0EC 0x330 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_13_FLEXSPI2_A_DATA00			0x0EC 0x330 0x57C 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_13_GPIO_MUX2_IO23			0x0EC 0x330 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_13_XBAR1_INOUT33			0x0EC 0x330 0x70C 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_13_EMVSIM1_RST			0x0EC 0x330 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_13_TMR2_TIMER0			0x0EC 0x330 0x648 0x9 0x1
+
+#define IOMUXC_GPIO_EMC_B2_14_SEMC_DATA29			0x0F0 0x334 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_14_ENET_1G_TX_CLK_IO			0x0F0 0x334 0x4E8 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_14_SAI3_TX_DATA			0x0F0 0x334 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_14_FLEXSPI2_A_DATA01			0x0F0 0x334 0x580 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_14_GPIO_MUX2_IO24			0x0F0 0x334 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_14_XBAR1_INOUT34			0x0F0 0x334 0x710 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_14_SFA_ipp_do_atx_clk_under_test	0x0F0 0x334 0x0 0x7 0x0
+#define IOMUXC_GPIO_EMC_B2_14_EMVSIM1_SVEN			0x0F0 0x334 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_14_TMR2_TIMER1			0x0F0 0x334 0x64C 0x9 0x1
+#define IOMUXC_GPIO_EMC_B2_14_GPIO8_IO24			0x0F0 0x334 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_15_SEMC_DATA30			0x0F4 0x338 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_15_ENET_1G_RX_DATA00			0x0F4 0x338 0x4D0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_15_SAI3_TX_BCLK			0x0F4 0x338 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_15_FLEXSPI2_A_DATA02			0x0F4 0x338 0x584 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_15_GPIO_MUX2_IO25			0x0F4 0x338 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_15_XBAR1_INOUT35			0x0F4 0x338 0x714 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_15_EMVSIM1_PD			0x0F4 0x338 0x6A0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_15_TMR2_TIMER2			0x0F4 0x338 0x650 0x9 0x0
+#define IOMUXC_GPIO_EMC_B2_15_GPIO8_IO25			0x0F4 0x338 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_16_GPIO8_IO26			0x0F8 0x33C 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_16_SEMC_DATA31			0x0F8 0x33C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_16_XBAR1_INOUT14			0x0F8 0x33C 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_16_ENET_1G_RX_DATA01			0x0F8 0x33C 0x4D4 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_16_SAI3_TX_SYNC			0x0F8 0x33C 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_16_FLEXSPI2_A_DATA03			0x0F8 0x33C 0x588 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_16_GPIO_MUX2_IO26			0x0F8 0x33C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_16_EMVSIM1_POWER_FAIL		0x0F8 0x33C 0x6A4 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_16_TMR2_TIMER3			0x0F8 0x33C 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_EMC_B2_17_SEMC_DM03				0x0FC 0x340 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_17_XBAR1_INOUT15			0x0FC 0x340 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_17_ENET_1G_RX_EN			0x0FC 0x340 0x4E0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_17_SAI3_MCLK				0x0FC 0x340 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_17_FLEXSPI2_A_DATA04			0x0FC 0x340 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_17_GPIO_MUX2_IO27			0x0FC 0x340 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_17_WDOG1_ANY				0x0FC 0x340 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_17_TMR3_TIMER0			0x0FC 0x340 0x654 0x9 0x1
+#define IOMUXC_GPIO_EMC_B2_17_GPIO8_IO27			0x0FC 0x340 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_18_SEMC_DQS4				0x100 0x344 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_18_XBAR1_INOUT16			0x100 0x344 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_18_ENET_1G_RX_ER			0x100 0x344 0x4E4 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_18_EWM_OUT_B				0x100 0x344 0x0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_18_FLEXSPI2_A_DATA05			0x100 0x344 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_18_GPIO_MUX2_IO28			0x100 0x344 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_18_FLEXSPI1_A_DQS			0x100 0x344 0x550 0x6 0x0
+#define IOMUXC_GPIO_EMC_B2_18_WDOG1_B				0x100 0x344 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_18_TMR3_TIMER1			0x100 0x344 0x658 0x9 0x1
+#define IOMUXC_GPIO_EMC_B2_18_GPIO8_IO28			0x100 0x344 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_EMC_B2_19_GPIO8_IO29			0x104 0x348 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_19_SEMC_CLKX00			0x104 0x348 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_19_ENET_MDC				0x104 0x348 0x0 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_19_ENET_1G_MDC			0x104 0x348 0x0 0x2 0x0
+#define IOMUXC_GPIO_EMC_B2_19_ENET_1G_REF_CLK			0x104 0x348 0x4C4 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_19_FLEXSPI2_A_DATA06			0x104 0x348 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_19_GPIO_MUX2_IO29			0x104 0x348 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_19_ENET_QOS_MDC			0x104 0x348 0x0 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_19_TMR3_TIMER2			0x104 0x348 0x65C 0x9 0x0
+
+#define IOMUXC_GPIO_EMC_B2_20_GPIO8_IO30			0x108 0x34C 0x0 0xA 0x0
+#define IOMUXC_GPIO_EMC_B2_20_SEMC_CLKX01			0x108 0x34C 0x0 0x0 0x0
+#define IOMUXC_GPIO_EMC_B2_20_ENET_MDIO				0x108 0x34C 0x4AC 0x1 0x0
+#define IOMUXC_GPIO_EMC_B2_20_ENET_1G_MDIO			0x108 0x34C 0x4C8 0x2 0x1
+#define IOMUXC_GPIO_EMC_B2_20_ENET_QOS_REF_CLK			0x108 0x34C 0x4A0 0x3 0x0
+#define IOMUXC_GPIO_EMC_B2_20_FLEXSPI2_A_DATA07			0x108 0x34C 0x0 0x4 0x0
+#define IOMUXC_GPIO_EMC_B2_20_GPIO_MUX2_IO30			0x108 0x34C 0x0 0x5 0x0
+#define IOMUXC_GPIO_EMC_B2_20_ENET_QOS_MDIO			0x108 0x34C 0x4EC 0x8 0x0
+#define IOMUXC_GPIO_EMC_B2_20_TMR3_TIMER3			0x108 0x34C 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_00_GPIO8_IO31				0x10C 0x350 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_00_EMVSIM1_IO				0x10C 0x350 0x69C 0x0 0x1
+#define IOMUXC_GPIO_AD_00_FLEXCAN2_TX				0x10C 0x350 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_00_ENET_1G_1588_EVENT1_IN		0x10C 0x350 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_00_GPT2_CAPTURE1				0x10C 0x350 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_00_FLEXPWM1_PWM0_A			0x10C 0x350 0x500 0x4 0x1
+#define IOMUXC_GPIO_AD_00_GPIO_MUX2_IO31			0x10C 0x350 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_00_LPUART7_TXD				0x10C 0x350 0x630 0x6 0x0
+#define IOMUXC_GPIO_AD_00_FLEXIO2_D00				0x10C 0x350 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_00_FLEXSPI2_B_SS1_B			0x10C 0x350 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_01_GPIO9_IO00				0x110 0x354 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_01_EMVSIM1_CLK				0x110 0x354 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_01_FLEXCAN2_RX				0x110 0x354 0x49C 0x1 0x0
+#define IOMUXC_GPIO_AD_01_ENET_1G_1588_EVENT1_OUT		0x110 0x354 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_01_GPT2_CAPTURE2				0x110 0x354 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_01_FLEXPWM1_PWM0_B			0x110 0x354 0x50C 0x4 0x1
+#define IOMUXC_GPIO_AD_01_GPIO_MUX3_IO00			0x110 0x354 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_01_LPUART7_RXD				0x110 0x354 0x62C 0x6 0x0
+#define IOMUXC_GPIO_AD_01_FLEXIO2_D01				0x110 0x354 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_01_FLEXSPI2_A_SS1_B			0x110 0x354 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_02_GPIO9_IO01				0x114 0x358 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_02_EMVSIM1_RST				0x114 0x358 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_02_LPUART7_CTS_B				0x114 0x358 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_02_ENET_1G_1588_EVENT2_IN		0x114 0x358 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_02_GPT2_COMPARE1				0x114 0x358 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_02_FLEXPWM1_PWM1_A			0x114 0x358 0x504 0x4 0x1
+#define IOMUXC_GPIO_AD_02_GPIO_MUX3_IO01			0x114 0x358 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_02_LPUART8_TXD				0x114 0x358 0x638 0x6 0x0
+#define IOMUXC_GPIO_AD_02_FLEXIO2_D02				0x114 0x358 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_02_VIDEO_MUX_EXT_DCIC1			0x114 0x358 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_03_GPIO9_IO02				0x118 0x35C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_03_EMVSIM1_SVEN				0x118 0x35C 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_03_LPUART7_RTS_B				0x118 0x35C 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_03_ENET_1G_1588_EVENT2_OUT		0x118 0x35C 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_03_GPT2_COMPARE2				0x118 0x35C 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_03_FLEXPWM1_PWM1_B			0x118 0x35C 0x510 0x4 0x1
+#define IOMUXC_GPIO_AD_03_GPIO_MUX3_IO02			0x118 0x35C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_03_LPUART8_RXD				0x118 0x35C 0x634 0x6 0x0
+#define IOMUXC_GPIO_AD_03_FLEXIO2_D03				0x118 0x35C 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_03_VIDEO_MUX_EXT_DCIC2			0x118 0x35C 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_04_EMVSIM1_PD				0x11C 0x360 0x6A0 0x0 0x1
+#define IOMUXC_GPIO_AD_04_LPUART8_CTS_B				0x11C 0x360 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_04_ENET_1G_1588_EVENT3_IN		0x11C 0x360 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_04_GPT2_COMPARE3				0x11C 0x360 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_04_FLEXPWM1_PWM2_A			0x11C 0x360 0x508 0x4 0x1
+#define IOMUXC_GPIO_AD_04_GPIO_MUX3_IO03			0x11C 0x360 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_04_WDOG1_B				0x11C 0x360 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_04_FLEXIO2_D04				0x11C 0x360 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_04_TMR4_TIMER0				0x11C 0x360 0x660 0x9 0x1
+#define IOMUXC_GPIO_AD_04_GPIO9_IO03				0x11C 0x360 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_05_EMVSIM1_POWER_FAIL			0x120 0x364 0x6A4 0x0 0x1
+#define IOMUXC_GPIO_AD_05_LPUART8_RTS_B				0x120 0x364 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_05_ENET_1G_1588_EVENT3_OUT		0x120 0x364 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_05_GPT2_CLK				0x120 0x364 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_05_FLEXPWM1_PWM2_B			0x120 0x364 0x514 0x4 0x1
+#define IOMUXC_GPIO_AD_05_GPIO_MUX3_IO04			0x120 0x364 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_05_WDOG2_B				0x120 0x364 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_05_FLEXIO2_D05				0x120 0x364 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_05_TMR4_TIMER1				0x120 0x364 0x664 0x9 0x1
+#define IOMUXC_GPIO_AD_05_GPIO9_IO04				0x120 0x364 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_06_USB_OTG2_OC				0x124 0x368 0x6B8 0x0 0x0
+#define IOMUXC_GPIO_AD_06_FLEXCAN1_TX				0x124 0x368 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_06_EMVSIM2_IO				0x124 0x368 0x6A8 0x2 0x0
+#define IOMUXC_GPIO_AD_06_GPT3_CAPTURE1				0x124 0x368 0x590 0x3 0x1
+#define IOMUXC_GPIO_AD_06_VIDEO_MUX_CSI_DATA15			0x124 0x368 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_06_GPIO_MUX3_IO05			0x124 0x368 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_06_ENET_1588_EVENT1_IN			0x124 0x368 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_06_FLEXIO2_D06				0x124 0x368 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_06_TMR4_TIMER2				0x124 0x368 0x668 0x9 0x0
+#define IOMUXC_GPIO_AD_06_GPIO9_IO05				0x124 0x368 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_06_FLEXPWM1_PWM0_X			0x124 0x368 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_07_USB_OTG2_PWR				0x128 0x36C 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_07_FLEXCAN1_RX				0x128 0x36C 0x498 0x1 0x0
+#define IOMUXC_GPIO_AD_07_EMVSIM2_CLK				0x128 0x36C 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_07_GPT3_CAPTURE2				0x128 0x36C 0x594 0x3 0x1
+#define IOMUXC_GPIO_AD_07_VIDEO_MUX_CSI_DATA14			0x128 0x36C 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_07_GPIO_MUX3_IO06			0x128 0x36C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_07_ENET_1588_EVENT1_OUT			0x128 0x36C 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_07_FLEXIO2_D07				0x128 0x36C 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_07_TMR4_TIMER3				0x128 0x36C 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_07_GPIO9_IO06				0x128 0x36C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_07_FLEXPWM1_PWM1_X			0x128 0x36C 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_08_USBPHY2_OTG_ID			0x12C 0x370 0x6C4 0x0 0x0
+#define IOMUXC_GPIO_AD_08_LPI2C1_SCL				0x12C 0x370 0x5AC 0x1 0x0
+#define IOMUXC_GPIO_AD_08_EMVSIM2_RST				0x12C 0x370 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_08_GPT3_COMPARE1				0x12C 0x370 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_08_VIDEO_MUX_CSI_DATA13			0x12C 0x370 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_08_GPIO_MUX3_IO07			0x12C 0x370 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_08_ENET_1588_EVENT2_IN			0x12C 0x370 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_08_FLEXIO2_D08				0x12C 0x370 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_08_GPIO9_IO07				0x12C 0x370 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_08_FLEXPWM1_PWM2_X			0x12C 0x370 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_09_USBPHY1_OTG_ID			0x130 0x374 0x6C0 0x0 0x0
+#define IOMUXC_GPIO_AD_09_LPI2C1_SDA				0x130 0x374 0x5B0 0x1 0x0
+#define IOMUXC_GPIO_AD_09_EMVSIM2_SVEN				0x130 0x374 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_09_GPT3_COMPARE2				0x130 0x374 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_09_VIDEO_MUX_CSI_DATA12			0x130 0x374 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_09_GPIO_MUX3_IO08			0x130 0x374 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_09_ENET_1588_EVENT2_OUT			0x130 0x374 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_09_FLEXIO2_D09				0x130 0x374 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_09_GPIO9_IO08				0x130 0x374 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_09_FLEXPWM1_PWM3_X			0x130 0x374 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_10_USB_OTG1_PWR				0x134 0x378 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_10_LPI2C1_SCLS				0x134 0x378 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_10_EMVSIM2_PD				0x134 0x378 0x6AC 0x2 0x0
+#define IOMUXC_GPIO_AD_10_GPT3_COMPARE3				0x134 0x378 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_10_VIDEO_MUX_CSI_DATA11			0x134 0x378 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_10_GPIO_MUX3_IO09			0x134 0x378 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_10_ENET_1588_EVENT3_IN			0x134 0x378 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_10_FLEXIO2_D10				0x134 0x378 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_10_GPIO9_IO09				0x134 0x378 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_10_FLEXPWM2_PWM0_X			0x134 0x378 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_11_USB_OTG1_OC				0x138 0x37C 0x6BC 0x0 0x0
+#define IOMUXC_GPIO_AD_11_LPI2C1_SDAS				0x138 0x37C 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_11_EMVSIM2_POWER_FAIL			0x138 0x37C 0x6B0 0x2 0x0
+#define IOMUXC_GPIO_AD_11_GPT3_CLK				0x138 0x37C 0x598 0x3 0x1
+#define IOMUXC_GPIO_AD_11_VIDEO_MUX_CSI_DATA10			0x138 0x37C 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_11_GPIO_MUX3_IO10			0x138 0x37C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_11_ENET_1588_EVENT3_OUT			0x138 0x37C 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_11_FLEXIO2_D11				0x138 0x37C 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_11_GPIO9_IO10				0x138 0x37C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_11_FLEXPWM2_PWM1_X			0x138 0x37C 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_12_SPDIF_LOCK				0x13C 0x380 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_12_LPI2C1_HREQ				0x13C 0x380 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_12_GPT1_CAPTURE1				0x13C 0x380 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_12_FLEXSPI1_B_DATA03			0x13C 0x380 0x570 0x3 0x0
+#define IOMUXC_GPIO_AD_12_VIDEO_MUX_CSI_PIXCLK			0x13C 0x380 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_12_GPIO_MUX3_IO11			0x13C 0x380 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_12_ENET_TX_DATA03			0x13C 0x380 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_12_FLEXIO2_D12				0x13C 0x380 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_12_EWM_OUT_B				0x13C 0x380 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_12_GPIO9_IO11				0x13C 0x380 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_12_FLEXPWM2_PWM2_X			0x13C 0x380 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_13_SPDIF_SR_CLK				0x140 0x384 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_13_PIT1_TRIGGER0				0x140 0x384 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_13_GPT1_CAPTURE2				0x140 0x384 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_13_FLEXSPI1_B_DATA02			0x140 0x384 0x56C 0x3 0x0
+#define IOMUXC_GPIO_AD_13_VIDEO_MUX_CSI_MCLK			0x140 0x384 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_13_GPIO_MUX3_IO12			0x140 0x384 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_13_ENET_TX_DATA02			0x140 0x384 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_13_FLEXIO2_D13				0x140 0x384 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_13_REF_CLK_32K				0x140 0x384 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_13_GPIO9_IO12				0x140 0x384 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_13_FLEXPWM2_PWM3_X			0x140 0x384 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_14_SPDIF_EXT_CLK				0x144 0x388 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_14_REF_CLK_24M				0x144 0x388 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_14_GPT1_COMPARE1				0x144 0x388 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_14_FLEXSPI1_B_DATA01			0x144 0x388 0x568 0x3 0x0
+#define IOMUXC_GPIO_AD_14_VIDEO_MUX_CSI_VSYNC			0x144 0x388 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_14_GPIO_MUX3_IO13			0x144 0x388 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_14_ENET_RX_CLK				0x144 0x388 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_14_FLEXIO2_D14				0x144 0x388 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_14_CCM_ENET_REF_CLK_25M			0x144 0x388 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_14_GPIO9_IO13				0x144 0x388 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_14_FLEXPWM3_PWM0_X			0x144 0x388 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_15_GPIO9_IO14				0x148 0x38C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_15_FLEXPWM3_PWM1_X			0x148 0x38C 0x0 0xB 0x0
+#define IOMUXC_GPIO_AD_15_SPDIF_IN				0x148 0x38C 0x6B4 0x0 0x1
+#define IOMUXC_GPIO_AD_15_LPUART10_TXD				0x148 0x38C 0x628 0x1 0x0
+#define IOMUXC_GPIO_AD_15_GPT1_COMPARE2				0x148 0x38C 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_15_FLEXSPI1_B_DATA00			0x148 0x38C 0x564 0x3 0x0
+#define IOMUXC_GPIO_AD_15_VIDEO_MUX_CSI_HSYNC			0x148 0x38C 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_15_GPIO_MUX3_IO14			0x148 0x38C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_15_ENET_TX_ER				0x148 0x38C 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_15_FLEXIO2_D15				0x148 0x38C 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_AD_16_SPDIF_OUT				0x14C 0x390 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_16_LPUART10_RXD				0x14C 0x390 0x624 0x1 0x0
+#define IOMUXC_GPIO_AD_16_GPT1_COMPARE3				0x14C 0x390 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_16_FLEXSPI1_B_SCLK			0x14C 0x390 0x578 0x3 0x0
+#define IOMUXC_GPIO_AD_16_VIDEO_MUX_CSI_DATA09			0x14C 0x390 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_16_GPIO_MUX3_IO15			0x14C 0x390 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_16_ENET_RX_DATA03			0x14C 0x390 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_16_FLEXIO2_D16				0x14C 0x390 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_16_ENET_1G_MDC				0x14C 0x390 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_16_GPIO9_IO15				0x14C 0x390 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_16_FLEXPWM3_PWM2_X			0x14C 0x390 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_17_SAI1_MCLK				0x150 0x394 0x66C 0x0 0x0
+#define IOMUXC_GPIO_AD_17_ACMP1_OUT				0x150 0x394 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_17_GPT1_CLK				0x150 0x394 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_17_FLEXSPI1_A_DQS			0x150 0x394 0x550 0x3 0x1
+#define IOMUXC_GPIO_AD_17_VIDEO_MUX_CSI_DATA08			0x150 0x394 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_17_GPIO_MUX3_IO16			0x150 0x394 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_17_ENET_RX_DATA02			0x150 0x394 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_17_FLEXIO2_D17				0x150 0x394 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_17_ENET_1G_MDIO				0x150 0x394 0x4C8 0x9 0x2
+#define IOMUXC_GPIO_AD_17_GPIO9_IO16				0x150 0x394 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_17_FLEXPWM3_PWM3_X			0x150 0x394 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_18_GPIO9_IO17				0x154 0x398 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_18_FLEXPWM4_PWM0_X			0x154 0x398 0x0 0xB 0x0
+#define IOMUXC_GPIO_AD_18_SAI1_RX_SYNC				0x154 0x398 0x678 0x0 0x0
+#define IOMUXC_GPIO_AD_18_ACMP2_OUT				0x154 0x398 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_18_LPSPI1_PCS1				0x154 0x398 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_18_FLEXSPI1_A_SS0_B			0x154 0x398 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_18_VIDEO_MUX_CSI_DATA07			0x154 0x398 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_18_GPIO_MUX3_IO17			0x154 0x398 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_18_ENET_CRS				0x154 0x398 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_18_FLEXIO2_D18				0x154 0x398 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_18_LPI2C2_SCL				0x154 0x398 0x5B4 0x9 0x1
+
+#define IOMUXC_GPIO_AD_19_SAI1_RX_BCLK				0x158 0x39C 0x670 0x0 0x0
+#define IOMUXC_GPIO_AD_19_ACMP3_OUT				0x158 0x39C 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_19_LPSPI1_PCS2				0x158 0x39C 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_19_FLEXSPI1_A_SCLK			0x158 0x39C 0x574 0x3 0x0
+#define IOMUXC_GPIO_AD_19_VIDEO_MUX_CSI_DATA06			0x158 0x39C 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_19_GPIO_MUX3_IO18			0x158 0x39C 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_19_ENET_COL				0x158 0x39C 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_19_FLEXIO2_D19				0x158 0x39C 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_19_LPI2C2_SDA				0x158 0x39C 0x5B8 0x9 0x1
+#define IOMUXC_GPIO_AD_19_GPIO9_IO18				0x158 0x39C 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_19_FLEXPWM4_PWM1_X			0x158 0x39C 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_20_SAI1_RX_DATA00			0x15C 0x3A0 0x674 0x0 0x0
+#define IOMUXC_GPIO_AD_20_ACMP4_OUT				0x15C 0x3A0 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_20_LPSPI1_PCS3				0x15C 0x3A0 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_20_FLEXSPI1_A_DATA00			0x15C 0x3A0 0x554 0x3 0x0
+#define IOMUXC_GPIO_AD_20_VIDEO_MUX_CSI_DATA05			0x15C 0x3A0 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_20_GPIO_MUX3_IO19			0x15C 0x3A0 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_20_KPP_ROW07				0x15C 0x3A0 0x5A8 0x6 0x0
+#define IOMUXC_GPIO_AD_20_FLEXIO2_D20				0x15C 0x3A0 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_20_ENET_QOS_1588_EVENT2_OUT		0x15C 0x3A0 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_20_GPIO9_IO19				0x15C 0x3A0 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_20_FLEXPWM4_PWM2_X			0x15C 0x3A0 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_21_SAI1_TX_DATA00			0x160 0x3A4 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_21_LPSPI2_PCS1				0x160 0x3A4 0x5E0 0x2 0x0
+#define IOMUXC_GPIO_AD_21_FLEXSPI1_A_DATA01			0x160 0x3A4 0x558 0x3 0x0
+#define IOMUXC_GPIO_AD_21_VIDEO_MUX_CSI_DATA04			0x160 0x3A4 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_21_GPIO_MUX3_IO20			0x160 0x3A4 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_21_KPP_COL07				0x160 0x3A4 0x5A0 0x6 0x0
+#define IOMUXC_GPIO_AD_21_FLEXIO2_D21				0x160 0x3A4 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_21_ENET_QOS_1588_EVENT2_IN		0x160 0x3A4 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_21_GPIO9_IO20				0x160 0x3A4 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_21_FLEXPWM4_PWM3_X			0x160 0x3A4 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_22_GPIO9_IO21				0x164 0x3A8 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_22_SAI1_TX_BCLK				0x164 0x3A8 0x67C 0x0 0x0
+#define IOMUXC_GPIO_AD_22_LPSPI2_PCS2				0x164 0x3A8 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_22_FLEXSPI1_A_DATA02			0x164 0x3A8 0x55C 0x3 0x0
+#define IOMUXC_GPIO_AD_22_VIDEO_MUX_CSI_DATA03			0x164 0x3A8 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_22_GPIO_MUX3_IO21			0x164 0x3A8 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_22_KPP_ROW06				0x164 0x3A8 0x5A4 0x6 0x0
+#define IOMUXC_GPIO_AD_22_FLEXIO2_D22				0x164 0x3A8 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_22_ENET_QOS_1588_EVENT3_OUT		0x164 0x3A8 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_23_SAI1_TX_SYNC				0x168 0x3AC 0x680 0x0 0x0
+#define IOMUXC_GPIO_AD_23_LPSPI2_PCS3				0x168 0x3AC 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_23_FLEXSPI1_A_DATA03			0x168 0x3AC 0x560 0x3 0x0
+#define IOMUXC_GPIO_AD_23_VIDEO_MUX_CSI_DATA02			0x168 0x3AC 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_23_GPIO_MUX3_IO22			0x168 0x3AC 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_23_KPP_COL06				0x168 0x3AC 0x59C 0x6 0x0
+#define IOMUXC_GPIO_AD_23_FLEXIO2_D23				0x168 0x3AC 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_23_ENET_QOS_1588_EVENT3_IN		0x168 0x3AC 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_23_GPIO9_IO22				0x168 0x3AC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_24_LPUART1_TXD				0x16C 0x3B0 0x620 0x0 0x0
+#define IOMUXC_GPIO_AD_24_LPSPI2_SCK				0x16C 0x3B0 0x5E4 0x1 0x0
+#define IOMUXC_GPIO_AD_24_VIDEO_MUX_CSI_DATA00			0x16C 0x3B0 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_24_ENET_RX_EN				0x16C 0x3B0 0x4B8 0x3 0x0
+#define IOMUXC_GPIO_AD_24_FLEXPWM2_PWM0_A			0x16C 0x3B0 0x518 0x4 0x1
+#define IOMUXC_GPIO_AD_24_GPIO_MUX3_IO23			0x16C 0x3B0 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_24_KPP_ROW05				0x16C 0x3B0 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_24_FLEXIO2_D24				0x16C 0x3B0 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_24_LPI2C4_SCL				0x16C 0x3B0 0x5C4 0x9 0x0
+#define IOMUXC_GPIO_AD_24_GPIO9_IO23				0x16C 0x3B0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_25_GPIO9_IO24				0x170 0x3B4 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_25_LPUART1_RXD				0x170 0x3B4 0x61C 0x0 0x0
+#define IOMUXC_GPIO_AD_25_LPSPI2_PCS0				0x170 0x3B4 0x5DC 0x1 0x0
+#define IOMUXC_GPIO_AD_25_VIDEO_MUX_CSI_DATA01			0x170 0x3B4 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_25_ENET_RX_ER				0x170 0x3B4 0x4BC 0x3 0x0
+#define IOMUXC_GPIO_AD_25_FLEXPWM2_PWM0_B			0x170 0x3B4 0x524 0x4 0x1
+#define IOMUXC_GPIO_AD_25_GPIO_MUX3_IO24			0x170 0x3B4 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_25_KPP_COL05				0x170 0x3B4 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_25_FLEXIO2_D25				0x170 0x3B4 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_25_LPI2C4_SDA				0x170 0x3B4 0x5C8 0x9 0x0
+
+#define IOMUXC_GPIO_AD_26_LPUART1_CTS_B				0x174 0x3B8 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_26_LPSPI2_SOUT				0x174 0x3B8 0x5EC 0x1 0x0
+#define IOMUXC_GPIO_AD_26_SEMC_CSX01				0x174 0x3B8 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_26_ENET_RX_DATA00			0x174 0x3B8 0x4B0 0x3 0x0
+#define IOMUXC_GPIO_AD_26_FLEXPWM2_PWM1_A			0x174 0x3B8 0x51C 0x4 0x1
+#define IOMUXC_GPIO_AD_26_GPIO_MUX3_IO25			0x174 0x3B8 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_26_KPP_ROW04				0x174 0x3B8 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_26_FLEXIO2_D26				0x174 0x3B8 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_26_ENET_QOS_MDC				0x174 0x3B8 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_26_GPIO9_IO25				0x174 0x3B8 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_26_USDHC2_CD_B				0x174 0x3B8 0x6D0 0xB 0x1
+
+#define IOMUXC_GPIO_AD_27_LPUART1_RTS_B				0x178 0x3BC 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_27_LPSPI2_SIN				0x178 0x3BC 0x5E8 0x1 0x0
+#define IOMUXC_GPIO_AD_27_SEMC_CSX02				0x178 0x3BC 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_27_ENET_RX_DATA01			0x178 0x3BC 0x4B4 0x3 0x0
+#define IOMUXC_GPIO_AD_27_FLEXPWM2_PWM1_B			0x178 0x3BC 0x528 0x4 0x1
+#define IOMUXC_GPIO_AD_27_GPIO_MUX3_IO26			0x178 0x3BC 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_27_KPP_COL04				0x178 0x3BC 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_27_FLEXIO2_D27				0x178 0x3BC 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_27_ENET_QOS_MDIO				0x178 0x3BC 0x4EC 0x9 0x1
+#define IOMUXC_GPIO_AD_27_GPIO9_IO26				0x178 0x3BC 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_27_USDHC2_WP				0x178 0x3BC 0x6D4 0xB 0x1
+
+#define IOMUXC_GPIO_AD_28_GPIO9_IO27				0x17C 0x3C0 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_28_USDHC2_VSELECT			0x17C 0x3C0 0x0 0xB 0x0
+#define IOMUXC_GPIO_AD_28_LPSPI1_SCK				0x17C 0x3C0 0x5D0 0x0 0x1
+#define IOMUXC_GPIO_AD_28_LPUART5_TXD				0x17C 0x3C0 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_28_SEMC_CSX03				0x17C 0x3C0 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_28_ENET_TX_EN				0x17C 0x3C0 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_28_FLEXPWM2_PWM2_A			0x17C 0x3C0 0x520 0x4 0x1
+#define IOMUXC_GPIO_AD_28_GPIO_MUX3_IO27			0x17C 0x3C0 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_28_KPP_ROW03				0x17C 0x3C0 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_28_FLEXIO2_D28				0x17C 0x3C0 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_28_VIDEO_MUX_EXT_DCIC1			0x17C 0x3C0 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_29_LPSPI1_PCS0				0x180 0x3C4 0x5CC 0x0 0x1
+#define IOMUXC_GPIO_AD_29_LPUART5_RXD				0x180 0x3C4 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_29_ENET_REF_CLK				0x180 0x3C4 0x4A8 0x2 0x0
+#define IOMUXC_GPIO_AD_29_ENET_TX_CLK				0x180 0x3C4 0x4C0 0x3 0x0
+#define IOMUXC_GPIO_AD_29_FLEXPWM2_PWM2_B			0x180 0x3C4 0x52C 0x4 0x1
+#define IOMUXC_GPIO_AD_29_GPIO_MUX3_IO28			0x180 0x3C4 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_29_KPP_COL03				0x180 0x3C4 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_29_FLEXIO2_D29				0x180 0x3C4 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_29_VIDEO_MUX_EXT_DCIC2			0x180 0x3C4 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_29_GPIO9_IO28				0x180 0x3C4 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_29_USDHC2_RESET_B			0x180 0x3C4 0x0 0xB 0x0
+
+#define IOMUXC_GPIO_AD_30_LPSPI1_SOUT				0x184 0x3C8 0x5D8 0x0 0x1
+#define IOMUXC_GPIO_AD_30_USB_OTG2_OC				0x184 0x3C8 0x6B8 0x1 0x1
+#define IOMUXC_GPIO_AD_30_FLEXCAN2_TX				0x184 0x3C8 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_30_ENET_TX_DATA00			0x184 0x3C8 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_30_LPUART3_TXD				0x184 0x3C8 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_30_GPIO_MUX3_IO29			0x184 0x3C8 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_30_KPP_ROW02				0x184 0x3C8 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_30_FLEXIO2_D30				0x184 0x3C8 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_30_WDOG2_RESET_B_DEB			0x184 0x3C8 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_30_GPIO9_IO29				0x184 0x3C8 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_31_LPSPI1_SIN				0x188 0x3CC 0x5D4 0x0 0x1
+#define IOMUXC_GPIO_AD_31_USB_OTG2_PWR				0x188 0x3CC 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_31_FLEXCAN2_RX				0x188 0x3CC 0x49C 0x2 0x1
+#define IOMUXC_GPIO_AD_31_ENET_TX_DATA01			0x188 0x3CC 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_31_LPUART3_RXD				0x188 0x3CC 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_31_GPIO_MUX3_IO30			0x188 0x3CC 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_31_KPP_COL02				0x188 0x3CC 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_31_FLEXIO2_D31				0x188 0x3CC 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_31_WDOG1_RESET_B_DEB			0x188 0x3CC 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_31_GPIO9_IO30				0x188 0x3CC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_32_GPIO9_IO31				0x18C 0x3D0 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_32_LPI2C1_SCL				0x18C 0x3D0 0x5AC 0x0 0x1
+#define IOMUXC_GPIO_AD_32_USBPHY2_OTG_ID			0x18C 0x3D0 0x6C4 0x1 0x1
+#define IOMUXC_GPIO_AD_32_PGMC_PMIC_RDY				0x18C 0x3D0 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_32_ENET_MDC				0x18C 0x3D0 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_32_USDHC1_CD_B				0x18C 0x3D0 0x6C8 0x4 0x0
+#define IOMUXC_GPIO_AD_32_GPIO_MUX3_IO31			0x18C 0x3D0 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_32_KPP_ROW01				0x18C 0x3D0 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_32_LPUART10_TXD				0x18C 0x3D0 0x628 0x8 0x1
+#define IOMUXC_GPIO_AD_32_ENET_1G_MDC				0x18C 0x3D0 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_AD_33_LPI2C1_SDA				0x190 0x3D4 0x5B0 0x0 0x1
+#define IOMUXC_GPIO_AD_33_USBPHY1_OTG_ID			0x190 0x3D4 0x6C0 0x1 0x1
+#define IOMUXC_GPIO_AD_33_XBAR1_INOUT17				0x190 0x3D4 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_33_ENET_MDIO				0x190 0x3D4 0x4AC 0x3 0x1
+#define IOMUXC_GPIO_AD_33_USDHC1_WP				0x190 0x3D4 0x6CC 0x4 0x0
+#define IOMUXC_GPIO_AD_33_GPIO_MUX4_IO00			0x190 0x3D4 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_33_KPP_COL01				0x190 0x3D4 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_33_LPUART10_RXD				0x190 0x3D4 0x624 0x8 0x1
+#define IOMUXC_GPIO_AD_33_ENET_1G_MDIO				0x190 0x3D4 0x4C8 0x9 0x3
+#define IOMUXC_GPIO_AD_33_GPIO10_IO00				0x190 0x3D4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_34_ENET_1G_1588_EVENT0_IN		0x194 0x3D8 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_34_USB_OTG1_PWR				0x194 0x3D8 0x0 0x1 0x0
+#define IOMUXC_GPIO_AD_34_XBAR1_INOUT18				0x194 0x3D8 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_34_ENET_1588_EVENT0_IN			0x194 0x3D8 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_34_USDHC1_VSELECT			0x194 0x3D8 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_34_GPIO_MUX4_IO01			0x194 0x3D8 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_34_KPP_ROW00				0x194 0x3D8 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_34_LPUART10_CTS_B			0x194 0x3D8 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_34_WDOG1_ANY				0x194 0x3D8 0x0 0x9 0x0
+#define IOMUXC_GPIO_AD_34_GPIO10_IO01				0x194 0x3D8 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_AD_35_GPIO10_IO02				0x198 0x3DC 0x0 0xA 0x0
+#define IOMUXC_GPIO_AD_35_ENET_1G_1588_EVENT0_OUT		0x198 0x3DC 0x0 0x0 0x0
+#define IOMUXC_GPIO_AD_35_USB_OTG1_OC				0x198 0x3DC 0x6BC 0x1 0x1
+#define IOMUXC_GPIO_AD_35_XBAR1_INOUT19				0x198 0x3DC 0x0 0x2 0x0
+#define IOMUXC_GPIO_AD_35_ENET_1588_EVENT0_OUT			0x198 0x3DC 0x0 0x3 0x0
+#define IOMUXC_GPIO_AD_35_USDHC1_RESET_B			0x198 0x3DC 0x0 0x4 0x0
+#define IOMUXC_GPIO_AD_35_GPIO_MUX4_IO02			0x198 0x3DC 0x0 0x5 0x0
+#define IOMUXC_GPIO_AD_35_KPP_COL00				0x198 0x3DC 0x0 0x6 0x0
+#define IOMUXC_GPIO_AD_35_LPUART10_RTS_B			0x198 0x3DC 0x0 0x8 0x0
+#define IOMUXC_GPIO_AD_35_FLEXSPI1_B_SS1_B			0x198 0x3DC 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_SD_B1_00_USDHC1_CMD				0x19C 0x3E0 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_00_XBAR1_INOUT20			0x19C 0x3E0 0x6D8 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_00_GPT4_CAPTURE1			0x19C 0x3E0 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_00_GPIO_MUX4_IO03			0x19C 0x3E0 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_00_FLEXSPI2_A_SS0_B			0x19C 0x3E0 0x0 0x6 0x0
+#define IOMUXC_GPIO_SD_B1_00_KPP_ROW07				0x19C 0x3E0 0x5A8 0x8 0x1
+#define IOMUXC_GPIO_SD_B1_00_GPIO10_IO03			0x19C 0x3E0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B1_01_USDHC1_CLK				0x1A0 0x3E4 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_01_XBAR1_INOUT21			0x1A0 0x3E4 0x6DC 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_01_GPT4_CAPTURE2			0x1A0 0x3E4 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_01_GPIO_MUX4_IO04			0x1A0 0x3E4 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_01_FLEXSPI2_A_SCLK			0x1A0 0x3E4 0x58C 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_01_KPP_COL07				0x1A0 0x3E4 0x5A0 0x8 0x1
+#define IOMUXC_GPIO_SD_B1_01_GPIO10_IO04			0x1A0 0x3E4 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B1_02_GPIO10_IO05			0x1A4 0x3E8 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B1_02_USDHC1_DATA0			0x1A4 0x3E8 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_02_XBAR1_INOUT22			0x1A4 0x3E8 0x6E0 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_02_GPT4_COMPARE1			0x1A4 0x3E8 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_02_GPIO_MUX4_IO05			0x1A4 0x3E8 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_02_FLEXSPI2_A_DATA00			0x1A4 0x3E8 0x57C 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_02_KPP_ROW06				0x1A4 0x3E8 0x5A4 0x8 0x1
+#define IOMUXC_GPIO_SD_B1_02_FLEXSPI1_A_SS1_B			0x1A4 0x3E8 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_SD_B1_03_USDHC1_DATA1			0x1A8 0x3EC 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_03_XBAR1_INOUT23			0x1A8 0x3EC 0x6E4 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_03_GPT4_COMPARE2			0x1A8 0x3EC 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_03_GPIO_MUX4_IO06			0x1A8 0x3EC 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_03_FLEXSPI2_A_DATA01			0x1A8 0x3EC 0x580 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_03_KPP_COL06				0x1A8 0x3EC 0x59C 0x8 0x1
+#define IOMUXC_GPIO_SD_B1_03_FLEXSPI1_B_SS1_B			0x1A8 0x3EC 0x0 0x9 0x0
+#define IOMUXC_GPIO_SD_B1_03_GPIO10_IO06			0x1A8 0x3EC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B1_04_USDHC1_DATA2			0x1AC 0x3F0 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_04_XBAR1_INOUT24			0x1AC 0x3F0 0x6E8 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_04_GPT4_COMPARE3			0x1AC 0x3F0 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_04_GPIO_MUX4_IO07			0x1AC 0x3F0 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_04_FLEXSPI2_A_DATA02			0x1AC 0x3F0 0x584 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_04_FLEXSPI1_B_SS0_B			0x1AC 0x3F0 0x0 0x8 0x0
+#define IOMUXC_GPIO_SD_B1_04_ENET_QOS_1588_EVENT2_AUX_IN	0x1AC 0x3F0 0x0 0x9 0x0
+#define IOMUXC_GPIO_SD_B1_04_GPIO10_IO07			0x1AC 0x3F0 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B1_05_GPIO10_IO08			0x1B0 0x3F4 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B1_05_USDHC1_DATA3			0x1B0 0x3F4 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B1_05_XBAR1_INOUT25			0x1B0 0x3F4 0x6EC 0x2 0x1
+#define IOMUXC_GPIO_SD_B1_05_GPT4_CLK				0x1B0 0x3F4 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B1_05_GPIO_MUX4_IO08			0x1B0 0x3F4 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B1_05_FLEXSPI2_A_DATA03			0x1B0 0x3F4 0x588 0x6 0x1
+#define IOMUXC_GPIO_SD_B1_05_FLEXSPI1_B_DQS			0x1B0 0x3F4 0x0 0x8 0x0
+#define IOMUXC_GPIO_SD_B1_05_ENET_QOS_1588_EVENT3_AUX_IN	0x1B0 0x3F4 0x0 0x9 0x0
+
+#define IOMUXC_GPIO_SD_B2_00_GPIO10_IO09			0x1B4 0x3F8 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_00_USDHC2_DATA3			0x1B4 0x3F8 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_00_FLEXSPI1_B_DATA03			0x1B4 0x3F8 0x570 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_00_ENET_1G_RX_EN			0x1B4 0x3F8 0x4E0 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_00_LPUART9_TXD			0x1B4 0x3F8 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_00_LPSPI4_SCK				0x1B4 0x3F8 0x610 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_00_GPIO_MUX4_IO09			0x1B4 0x3F8 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_01_USDHC2_DATA2			0x1B8 0x3FC 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_01_FLEXSPI1_B_DATA02			0x1B8 0x3FC 0x56C 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_01_ENET_1G_RX_CLK			0x1B8 0x3FC 0x4CC 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_01_LPUART9_RXD			0x1B8 0x3FC 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_01_LPSPI4_PCS0			0x1B8 0x3FC 0x60C 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_01_GPIO_MUX4_IO10			0x1B8 0x3FC 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_01_GPIO10_IO10			0x1B8 0x3FC 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B2_02_GPIO10_IO11			0x1BC 0x400 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_02_USDHC2_DATA1			0x1BC 0x400 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_02_FLEXSPI1_B_DATA01			0x1BC 0x400 0x568 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_02_ENET_1G_RX_DATA00			0x1BC 0x400 0x4D0 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_02_LPUART9_CTS_B			0x1BC 0x400 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_02_LPSPI4_SOUT			0x1BC 0x400 0x618 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_02_GPIO_MUX4_IO11			0x1BC 0x400 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_03_GPIO10_IO12			0x1C0 0x404 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_03_USDHC2_DATA0			0x1C0 0x404 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_03_FLEXSPI1_B_DATA00			0x1C0 0x404 0x564 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_03_ENET_1G_RX_DATA01			0x1C0 0x404 0x4D4 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_03_LPUART9_RTS_B			0x1C0 0x404 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_03_LPSPI4_SIN				0x1C0 0x404 0x614 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_03_GPIO_MUX4_IO12			0x1C0 0x404 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_04_USDHC2_CLK				0x1C4 0x408 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_04_FLEXSPI1_B_SCLK			0x1C4 0x408 0x578 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_04_ENET_1G_RX_DATA02			0x1C4 0x408 0x4D8 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_04_FLEXSPI1_A_SS1_B			0x1C4 0x408 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_04_LPSPI4_PCS1			0x1C4 0x408 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_04_GPIO_MUX4_IO13			0x1C4 0x408 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_04_GPIO10_IO13			0x1C4 0x408 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B2_05_GPIO10_IO14			0x1C8 0x40C 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_05_USDHC2_CMD				0x1C8 0x40C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_05_FLEXSPI1_A_DQS			0x1C8 0x40C 0x550 0x1 0x2
+#define IOMUXC_GPIO_SD_B2_05_ENET_1G_RX_DATA03			0x1C8 0x40C 0x4DC 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_05_FLEXSPI1_B_SS0_B			0x1C8 0x40C 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_05_LPSPI4_PCS2			0x1C8 0x40C 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_05_GPIO_MUX4_IO14			0x1C8 0x40C 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_06_GPIO10_IO15			0x1CC 0x410 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_06_USDHC2_RESET_B			0x1CC 0x410 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_06_FLEXSPI1_A_SS0_B			0x1CC 0x410 0x0 0x1 0x0
+#define IOMUXC_GPIO_SD_B2_06_ENET_1G_TX_DATA03			0x1CC 0x410 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_06_LPSPI4_PCS3			0x1CC 0x410 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_06_GPT6_CAPTURE1			0x1CC 0x410 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_06_GPIO_MUX4_IO15			0x1CC 0x410 0x0 0x5 0x0
+
+#define IOMUXC_GPIO_SD_B2_07_USDHC2_STROBE			0x1D0 0x414 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_07_FLEXSPI1_A_SCLK			0x1D0 0x414 0x574 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_07_ENET_1G_TX_DATA02			0x1D0 0x414 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_07_LPUART3_CTS_B			0x1D0 0x414 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_07_GPT6_CAPTURE2			0x1D0 0x414 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_07_GPIO_MUX4_IO16			0x1D0 0x414 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_07_LPSPI2_SCK				0x1D0 0x414 0x5E4 0x6 0x1
+#define IOMUXC_GPIO_SD_B2_07_ENET_TX_ER				0x1D0 0x414 0x0 0x8 0x0
+#define IOMUXC_GPIO_SD_B2_07_ENET_QOS_REF_CLK			0x1D0 0x414 0x4A0 0x9 0x1
+#define IOMUXC_GPIO_SD_B2_07_GPIO10_IO16			0x1D0 0x414 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_SD_B2_08_GPIO10_IO17			0x1D4 0x418 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_08_USDHC2_DATA4			0x1D4 0x418 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_08_FLEXSPI1_A_DATA00			0x1D4 0x418 0x554 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_08_ENET_1G_TX_DATA01			0x1D4 0x418 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_08_LPUART3_RTS_B			0x1D4 0x418 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_08_GPT6_COMPARE1			0x1D4 0x418 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_08_GPIO_MUX4_IO17			0x1D4 0x418 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_08_LPSPI2_PCS0			0x1D4 0x418 0x5DC 0x6 0x1
+
+#define IOMUXC_GPIO_SD_B2_09_GPIO10_IO18			0x1D8 0x41C 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_09_USDHC2_DATA5			0x1D8 0x41C 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_09_FLEXSPI1_A_DATA01			0x1D8 0x41C 0x558 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_09_ENET_1G_TX_DATA00			0x1D8 0x41C 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_09_LPUART5_CTS_B			0x1D8 0x41C 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_09_GPT6_COMPARE2			0x1D8 0x41C 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_09_GPIO_MUX4_IO18			0x1D8 0x41C 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_09_LPSPI2_SOUT			0x1D8 0x41C 0x5EC 0x6 0x1
+
+#define IOMUXC_GPIO_SD_B2_10_GPIO10_IO19			0x1DC 0x420 0x0 0xA 0x0
+#define IOMUXC_GPIO_SD_B2_10_USDHC2_DATA6			0x1DC 0x420 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_10_FLEXSPI1_A_DATA02			0x1DC 0x420 0x55C 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_10_ENET_1G_TX_EN			0x1DC 0x420 0x0 0x2 0x0
+#define IOMUXC_GPIO_SD_B2_10_LPUART5_RTS_B			0x1DC 0x420 0x0 0x3 0x0
+#define IOMUXC_GPIO_SD_B2_10_GPT6_COMPARE3			0x1DC 0x420 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_10_GPIO_MUX4_IO19			0x1DC 0x420 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_10_LPSPI2_SIN				0x1DC 0x420 0x5E8 0x6 0x1
+
+#define IOMUXC_GPIO_SD_B2_11_USDHC2_DATA7			0x1E0 0x424 0x0 0x0 0x0
+#define IOMUXC_GPIO_SD_B2_11_FLEXSPI1_A_DATA03			0x1E0 0x424 0x560 0x1 0x1
+#define IOMUXC_GPIO_SD_B2_11_ENET_1G_TX_CLK_IO			0x1E0 0x424 0x4E8 0x2 0x1
+#define IOMUXC_GPIO_SD_B2_11_ENET_1G_REF_CLK			0x1E0 0x424 0x4C4 0x3 0x1
+#define IOMUXC_GPIO_SD_B2_11_GPT6_CLK				0x1E0 0x424 0x0 0x4 0x0
+#define IOMUXC_GPIO_SD_B2_11_GPIO_MUX4_IO20			0x1E0 0x424 0x0 0x5 0x0
+#define IOMUXC_GPIO_SD_B2_11_LPSPI2_PCS1			0x1E0 0x424 0x5E0 0x6 0x1
+#define IOMUXC_GPIO_SD_B2_11_GPIO10_IO20			0x1E0 0x424 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_00_VIDEO_MUX_LCDIF_CLK		0x1E4 0x428 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_00_ENET_1G_RX_EN			0x1E4 0x428 0x4E0 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_00_TMR1_TIMER0			0x1E4 0x428 0x63C 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_00_XBAR1_INOUT26			0x1E4 0x428 0x6F0 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_00_GPIO_MUX4_IO21			0x1E4 0x428 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_00_ENET_QOS_RX_EN			0x1E4 0x428 0x4F8 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_00_GPIO10_IO21			0x1E4 0x428 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_01_VIDEO_MUX_LCDIF_ENABLE		0x1E8 0x42C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_01_ENET_1G_RX_CLK			0x1E8 0x42C 0x4CC 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_01_ENET_1G_RX_ER			0x1E8 0x42C 0x4E4 0x2 0x1
+#define IOMUXC_GPIO_DISP_B1_01_TMR1_TIMER1			0x1E8 0x42C 0x640 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_01_XBAR1_INOUT27			0x1E8 0x42C 0x6F4 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_01_GPIO_MUX4_IO22			0x1E8 0x42C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_01_ENET_QOS_RX_CLK			0x1E8 0x42C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_01_ENET_QOS_RX_ER			0x1E8 0x42C 0x4FC 0x9 0x0
+#define IOMUXC_GPIO_DISP_B1_01_GPIO10_IO22			0x1E8 0x42C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_02_GPIO10_IO23			0x1EC 0x430 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B1_02_VIDEO_MUX_LCDIF_HSYNC		0x1EC 0x430 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_02_ENET_1G_RX_DATA00		0x1EC 0x430 0x4D0 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_02_LPI2C3_SCL			0x1EC 0x430 0x5BC 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_02_TMR1_TIMER2			0x1EC 0x430 0x644 0x3 0x1
+#define IOMUXC_GPIO_DISP_B1_02_XBAR1_INOUT28			0x1EC 0x430 0x6F8 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_02_GPIO_MUX4_IO23			0x1EC 0x430 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_02_ENET_QOS_RX_DATA00		0x1EC 0x430 0x4F0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_02_LPUART1_TXD			0x1EC 0x430 0x620 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B1_03_VIDEO_MUX_LCDIF_VSYNC		0x1F0 0x434 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_03_ENET_1G_RX_DATA01		0x1F0 0x434 0x4D4 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_03_LPI2C3_SDA			0x1F0 0x434 0x5C0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_03_TMR2_TIMER0			0x1F0 0x434 0x648 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_03_XBAR1_INOUT29			0x1F0 0x434 0x6FC 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_03_GPIO_MUX4_IO24			0x1F0 0x434 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_03_ENET_QOS_RX_DATA01		0x1F0 0x434 0x4F4 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_03_LPUART1_RXD			0x1F0 0x434 0x61C 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_03_GPIO10_IO24			0x1F0 0x434 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_04_VIDEO_MUX_LCDIF_DATA00		0x1F4 0x438 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_04_ENET_1G_RX_DATA02		0x1F4 0x438 0x4D8 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_04_LPUART4_RXD			0x1F4 0x438 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_04_TMR2_TIMER1			0x1F4 0x438 0x64C 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_04_XBAR1_INOUT30			0x1F4 0x438 0x700 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_04_GPIO_MUX4_IO25			0x1F4 0x438 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_04_ENET_QOS_RX_DATA02		0x1F4 0x438 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_04_LPSPI3_SCK			0x1F4 0x438 0x600 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_04_GPIO10_IO25			0x1F4 0x438 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_05_GPIO10_IO26			0x1F8 0x43C 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B1_05_VIDEO_MUX_LCDIF_DATA01		0x1F8 0x43C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_05_ENET_1G_RX_DATA03		0x1F8 0x43C 0x4DC 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_05_LPUART4_CTS_B			0x1F8 0x43C 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_05_TMR2_TIMER2			0x1F8 0x43C 0x650 0x3 0x1
+#define IOMUXC_GPIO_DISP_B1_05_XBAR1_INOUT31			0x1F8 0x43C 0x704 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_05_GPIO_MUX4_IO26			0x1F8 0x43C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_05_ENET_QOS_RX_DATA03		0x1F8 0x43C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_05_LPSPI3_SIN			0x1F8 0x43C 0x604 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B1_06_VIDEO_MUX_LCDIF_DATA02		0x1FC 0x440 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_06_ENET_1G_TX_DATA03		0x1FC 0x440 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_06_LPUART4_TXD			0x1FC 0x440 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_06_TMR3_TIMER0			0x1FC 0x440 0x654 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_06_XBAR1_INOUT32			0x1FC 0x440 0x708 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_06_GPIO_MUX4_IO27			0x1FC 0x440 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_06_SRC_BT_CFG00			0x1FC 0x440 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_06_ENET_QOS_TX_DATA03		0x1FC 0x440 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_06_LPSPI3_SOUT			0x1FC 0x440 0x608 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_06_GPIO10_IO27			0x1FC 0x440 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_07_VIDEO_MUX_LCDIF_DATA03		0x200 0x444 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_07_ENET_1G_TX_DATA02		0x200 0x444 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_07_LPUART4_RTS_B			0x200 0x444 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_07_TMR3_TIMER1			0x200 0x444 0x658 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_07_XBAR1_INOUT33			0x200 0x444 0x70C 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_07_GPIO_MUX4_IO28			0x200 0x444 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_07_SRC_BT_CFG01			0x200 0x444 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_07_ENET_QOS_TX_DATA02		0x200 0x444 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_07_LPSPI3_PCS0			0x200 0x444 0x5F0 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_07_GPIO10_IO28			0x200 0x444 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_08_GPIO10_IO29			0x204 0x448 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B1_08_VIDEO_MUX_LCDIF_DATA04		0x204 0x448 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_08_ENET_1G_TX_DATA01		0x204 0x448 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_08_USDHC1_CD_B			0x204 0x448 0x6C8 0x2 0x1
+#define IOMUXC_GPIO_DISP_B1_08_TMR3_TIMER2			0x204 0x448 0x65C 0x3 0x1
+#define IOMUXC_GPIO_DISP_B1_08_XBAR1_INOUT34			0x204 0x448 0x710 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_08_GPIO_MUX4_IO29			0x204 0x448 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_08_SRC_BT_CFG02			0x204 0x448 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_08_ENET_QOS_TX_DATA01		0x204 0x448 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_08_LPSPI3_PCS1			0x204 0x448 0x5F4 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B1_09_VIDEO_MUX_LCDIF_DATA05		0x208 0x44C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_09_ENET_1G_TX_DATA00		0x208 0x44C 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_09_USDHC1_WP			0x208 0x44C 0x6CC 0x2 0x1
+#define IOMUXC_GPIO_DISP_B1_09_TMR4_TIMER0			0x208 0x44C 0x660 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_09_XBAR1_INOUT35			0x208 0x44C 0x714 0x4 0x1
+#define IOMUXC_GPIO_DISP_B1_09_GPIO_MUX4_IO30			0x208 0x44C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_09_SRC_BT_CFG03			0x208 0x44C 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_09_ENET_QOS_TX_DATA00		0x208 0x44C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_09_LPSPI3_PCS2			0x208 0x44C 0x5F8 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_09_GPIO10_IO30			0x208 0x44C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_10_VIDEO_MUX_LCDIF_DATA06		0x20C 0x450 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_10_ENET_1G_TX_EN			0x20C 0x450 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B1_10_USDHC1_RESET_B			0x20C 0x450 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B1_10_TMR4_TIMER1			0x20C 0x450 0x664 0x3 0x2
+#define IOMUXC_GPIO_DISP_B1_10_XBAR1_INOUT36			0x20C 0x450 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B1_10_GPIO_MUX4_IO31			0x20C 0x450 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_10_SRC_BT_CFG04			0x20C 0x450 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_10_ENET_QOS_TX_EN			0x20C 0x450 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_10_LPSPI3_PCS3			0x20C 0x450 0x5FC 0x9 0x1
+#define IOMUXC_GPIO_DISP_B1_10_GPIO10_IO31			0x20C 0x450 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B1_11_VIDEO_MUX_LCDIF_DATA07		0x210 0x454 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B1_11_ENET_1G_TX_CLK_IO		0x210 0x454 0x4E8 0x1 0x2
+#define IOMUXC_GPIO_DISP_B1_11_ENET_1G_REF_CLK			0x210 0x454 0x4C4 0x2 0x2
+#define IOMUXC_GPIO_DISP_B1_11_TMR4_TIMER2			0x210 0x454 0x668 0x3 0x1
+#define IOMUXC_GPIO_DISP_B1_11_XBAR1_INOUT37			0x210 0x454 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B1_11_GPIO_MUX5_IO00			0x210 0x454 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B1_11_SRC_BT_CFG05			0x210 0x454 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B1_11_ENET_QOS_TX_CLK			0x210 0x454 0x4A4 0x8 0x0
+#define IOMUXC_GPIO_DISP_B1_11_ENET_QOS_REF_CLK			0x210 0x454 0x4A0 0x9 0x2
+#define IOMUXC_GPIO_DISP_B1_11_GPIO11_IO00			0x210 0x454 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_00_GPIO11_IO01			0x214 0x458 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_00_VIDEO_MUX_LCDIF_DATA08		0x214 0x458 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_00_WDOG1_B				0x214 0x458 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_00_MQS_RIGHT			0x214 0x458 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_00_ENET_1G_TX_ER			0x214 0x458 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_00_SAI1_TX_DATA03			0x214 0x458 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_00_GPIO_MUX5_IO01			0x214 0x458 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_00_SRC_BT_CFG06			0x214 0x458 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_00_ENET_QOS_TX_ER			0x214 0x458 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_DISP_B2_01_VIDEO_MUX_LCDIF_DATA09		0x218 0x45C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_01_USDHC1_VSELECT			0x218 0x45C 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_01_MQS_LEFT				0x218 0x45C 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_01_WDOG2_B				0x218 0x45C 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_01_SAI1_TX_DATA02			0x218 0x45C 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_01_GPIO_MUX5_IO02			0x218 0x45C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_01_SRC_BT_CFG07			0x218 0x45C 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_01_EWM_OUT_B			0x218 0x45C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_01_CCM_ENET_REF_CLK_25M		0x218 0x45C 0x0 0x9 0x0
+#define IOMUXC_GPIO_DISP_B2_01_GPIO11_IO02			0x218 0x45C 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_02_GPIO11_IO03			0x21C 0x460 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_02_VIDEO_MUX_LCDIF_DATA10		0x21C 0x460 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_02_ENET_TX_DATA00			0x21C 0x460 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_02_PIT1_TRIGGER3			0x21C 0x460 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_02_ARM_TRACE00			0x21C 0x460 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_02_SAI1_TX_DATA01			0x21C 0x460 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_02_GPIO_MUX5_IO03			0x21C 0x460 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_02_SRC_BT_CFG08			0x21C 0x460 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_02_ENET_QOS_TX_DATA00		0x21C 0x460 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_DISP_B2_03_GPIO11_IO04			0x220 0x464 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_03_VIDEO_MUX_LCDIF_DATA11		0x220 0x464 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_03_ENET_TX_DATA01			0x220 0x464 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_03_PIT1_TRIGGER2			0x220 0x464 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_03_ARM_TRACE01			0x220 0x464 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_03_SAI1_MCLK			0x220 0x464 0x66C 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_03_GPIO_MUX5_IO04			0x220 0x464 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_03_SRC_BT_CFG09			0x220 0x464 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_03_ENET_QOS_TX_DATA01		0x220 0x464 0x0 0x8 0x0
+
+#define IOMUXC_GPIO_DISP_B2_04_VIDEO_MUX_LCDIF_DATA12		0x224 0x468 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_04_ENET_TX_EN			0x224 0x468 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_04_PIT1_TRIGGER1			0x224 0x468 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_04_ARM_TRACE02			0x224 0x468 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_04_SAI1_RX_SYNC			0x224 0x468 0x678 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_04_GPIO_MUX5_IO05			0x224 0x468 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_04_SRC_BT_CFG10			0x224 0x468 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_04_ENET_QOS_TX_EN			0x224 0x468 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_04_GPIO11_IO05			0x224 0x468 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_05_GPIO11_IO06			0x228 0x46C 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_05_VIDEO_MUX_LCDIF_DATA13		0x228 0x46C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_05_ENET_TX_CLK			0x228 0x46C 0x4C0 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_05_ENET_REF_CLK			0x228 0x46C 0x4A8 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_05_ARM_TRACE03			0x228 0x46C 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_05_SAI1_RX_BCLK			0x228 0x46C 0x670 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_05_GPIO_MUX5_IO06			0x228 0x46C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_05_SRC_BT_CFG11			0x228 0x46C 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_05_ENET_QOS_TX_CLK			0x228 0x46C 0x4A4 0x8 0x1
+
+#define IOMUXC_GPIO_DISP_B2_06_GPIO11_IO07			0x22C 0x470 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_06_VIDEO_MUX_LCDIF_DATA14		0x22C 0x470 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_06_ENET_RX_DATA00			0x22C 0x470 0x4B0 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_06_LPUART7_TXD			0x22C 0x470 0x630 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_06_ARM_TRACE_CLK			0x22C 0x470 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_06_SAI1_RX_DATA00			0x22C 0x470 0x674 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_06_GPIO_MUX5_IO07			0x22C 0x470 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_06_ENET_QOS_RX_DATA00		0x22C 0x470 0x4F0 0x8 0x1
+
+#define IOMUXC_GPIO_DISP_B2_07_VIDEO_MUX_LCDIF_DATA15		0x230 0x474 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_07_ENET_RX_DATA01			0x230 0x474 0x4B4 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_07_LPUART7_RXD			0x230 0x474 0x62C 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_07_ARM_TRACE_SWO			0x230 0x474 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_07_SAI1_TX_DATA00			0x230 0x474 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_07_GPIO_MUX5_IO08			0x230 0x474 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_07_ENET_QOS_RX_DATA01		0x230 0x474 0x4F4 0x8 0x1
+#define IOMUXC_GPIO_DISP_B2_07_GPIO11_IO08			0x230 0x474 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_08_GPIO11_IO09			0x234 0x478 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_08_VIDEO_MUX_LCDIF_DATA16		0x234 0x478 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_08_ENET_RX_EN			0x234 0x478 0x4B8 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_08_LPUART8_TXD			0x234 0x478 0x638 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_08_ARM_CM7_EVENTO			0x234 0x478 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_08_SAI1_TX_BCLK			0x234 0x478 0x67C 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_08_GPIO_MUX5_IO09			0x234 0x478 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_08_ENET_QOS_RX_EN			0x234 0x478 0x4F8 0x8 0x1
+#define IOMUXC_GPIO_DISP_B2_08_LPUART1_TXD			0x234 0x478 0x620 0x9 0x2
+
+#define IOMUXC_GPIO_DISP_B2_09_GPIO11_IO10			0x238 0x47C 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_09_VIDEO_MUX_LCDIF_DATA17		0x238 0x47C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_09_ENET_RX_ER			0x238 0x47C 0x4BC 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_09_LPUART8_RXD			0x238 0x47C 0x634 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_09_ARM_CM7_EVENTI			0x238 0x47C 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_09_SAI1_TX_SYNC			0x238 0x47C 0x680 0x4 0x1
+#define IOMUXC_GPIO_DISP_B2_09_GPIO_MUX5_IO10			0x238 0x47C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_09_ENET_QOS_RX_ER			0x238 0x47C 0x4FC 0x8 0x1
+#define IOMUXC_GPIO_DISP_B2_09_LPUART1_RXD			0x238 0x47C 0x61C 0x9 0x2
+
+#define IOMUXC_GPIO_DISP_B2_10_GPIO11_IO11			0x23C 0x480 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_10_VIDEO_MUX_LCDIF_DATA18		0x23C 0x480 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_10_EMVSIM2_IO			0x23C 0x480 0x6A8 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_10_LPUART2_TXD			0x23C 0x480 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_10_WDOG2_RESET_B_DEB		0x23C 0x480 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_10_XBAR1_INOUT38			0x23C 0x480 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_10_GPIO_MUX5_IO11			0x23C 0x480 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_10_LPI2C3_SCL			0x23C 0x480 0x5BC 0x6 0x1
+#define IOMUXC_GPIO_DISP_B2_10_ENET_QOS_RX_ER			0x23C 0x480 0x4FC 0x8 0x2
+#define IOMUXC_GPIO_DISP_B2_10_SPDIF_IN				0x23C 0x480 0x6B4 0x9 0x2
+
+#define IOMUXC_GPIO_DISP_B2_11_VIDEO_MUX_LCDIF_DATA19		0x240 0x484 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_11_EMVSIM2_CLK			0x240 0x484 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_11_LPUART2_RXD			0x240 0x484 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_11_WDOG1_RESET_B_DEB		0x240 0x484 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_11_XBAR1_INOUT39			0x240 0x484 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_11_GPIO_MUX5_IO12			0x240 0x484 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_11_LPI2C3_SDA			0x240 0x484 0x5C0 0x6 0x1
+#define IOMUXC_GPIO_DISP_B2_11_ENET_QOS_CRS			0x240 0x484 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_11_SPDIF_OUT			0x240 0x484 0x0 0x9 0x0
+#define IOMUXC_GPIO_DISP_B2_11_GPIO11_IO12			0x240 0x484 0x0 0xA 0x0
+
+#define IOMUXC_GPIO_DISP_B2_12_GPIO11_IO13			0x244 0x488 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_12_VIDEO_MUX_LCDIF_DATA20		0x244 0x488 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_12_EMVSIM2_RST			0x244 0x488 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_12_FLEXCAN1_TX			0x244 0x488 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_12_LPUART2_CTS_B			0x244 0x488 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_12_XBAR1_INOUT40			0x244 0x488 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_12_GPIO_MUX5_IO13			0x244 0x488 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_12_LPI2C4_SCL			0x244 0x488 0x5C4 0x6 0x1
+#define IOMUXC_GPIO_DISP_B2_12_ENET_QOS_COL			0x244 0x488 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_12_LPSPI4_SCK			0x244 0x488 0x610 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B2_13_GPIO11_IO14			0x248 0x48C 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_13_VIDEO_MUX_LCDIF_DATA21		0x248 0x48C 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_13_EMVSIM2_SVEN			0x248 0x48C 0x0 0x1 0x0
+#define IOMUXC_GPIO_DISP_B2_13_FLEXCAN1_RX			0x248 0x48C 0x498 0x2 0x1
+#define IOMUXC_GPIO_DISP_B2_13_LPUART2_RTS_B			0x248 0x48C 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_13_ENET_REF_CLK			0x248 0x48C 0x4A8 0x4 0x2
+#define IOMUXC_GPIO_DISP_B2_13_GPIO_MUX5_IO14			0x248 0x48C 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_13_LPI2C4_SDA			0x248 0x48C 0x5C8 0x6 0x1
+#define IOMUXC_GPIO_DISP_B2_13_ENET_QOS_1588_EVENT0_OUT		0x248 0x48C 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_13_LPSPI4_SIN			0x248 0x48C 0x614 0x9 0x1
+
+#define IOMUXC_GPIO_DISP_B2_14_GPIO_MUX5_IO15			0x24C 0x490 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_14_FLEXCAN1_TX			0x24C 0x490 0x0 0x6 0x0
+#define IOMUXC_GPIO_DISP_B2_14_ENET_QOS_1588_EVENT0_IN		0x24C 0x490 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_14_LPSPI4_SOUT			0x24C 0x490 0x618 0x9 0x1
+#define IOMUXC_GPIO_DISP_B2_14_GPIO11_IO15			0x24C 0x490 0x0 0xA 0x0
+#define IOMUXC_GPIO_DISP_B2_14_VIDEO_MUX_LCDIF_DATA22		0x24C 0x490 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_14_EMVSIM2_PD			0x24C 0x490 0x6AC 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_14_WDOG2_B				0x24C 0x490 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_14_VIDEO_MUX_EXT_DCIC1		0x24C 0x490 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_14_ENET_1G_REF_CLK			0x24C 0x490 0x4C4 0x4 0x3
+
+#define IOMUXC_GPIO_DISP_B2_15_VIDEO_MUX_LCDIF_DATA23		0x250 0x494 0x0 0x0 0x0
+#define IOMUXC_GPIO_DISP_B2_15_EMVSIM2_POWER_FAIL		0x250 0x494 0x6B0 0x1 0x1
+#define IOMUXC_GPIO_DISP_B2_15_WDOG1_B				0x250 0x494 0x0 0x2 0x0
+#define IOMUXC_GPIO_DISP_B2_15_VIDEO_MUX_EXT_DCIC2		0x250 0x494 0x0 0x3 0x0
+#define IOMUXC_GPIO_DISP_B2_15_PIT1_TRIGGER0			0x250 0x494 0x0 0x4 0x0
+#define IOMUXC_GPIO_DISP_B2_15_GPIO_MUX5_IO16			0x250 0x494 0x0 0x5 0x0
+#define IOMUXC_GPIO_DISP_B2_15_FLEXCAN1_RX			0x250 0x494 0x498 0x6 0x2
+#define IOMUXC_GPIO_DISP_B2_15_ENET_QOS_1588_EVENT0_AUX_IN	0x250 0x494 0x0 0x8 0x0
+#define IOMUXC_GPIO_DISP_B2_15_LPSPI4_PCS0			0x250 0x494 0x60C 0x9 0x1
+#define IOMUXC_GPIO_DISP_B2_15_GPIO11_IO16			0x250 0x494 0x0 0xA 0x0
+
+#endif  /* _DT_BINDINGS_PINCTRL_IMXRT1170_PINFUNC_H */
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
index 602f74d2c758..7f1c8ee9dd8a 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -15,10 +15,14 @@
 	core-module@10000000 {
 		compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
 		reg = <0x10000000 0x200>;
+		ranges = <0x0 0x10000000 0x200>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
 		/* Use core module LED to indicate CPU load */
-		led@c.0 {
+		led@c,0 {
 			compatible = "register-bit-led";
+			reg = <0x0c 0x04>;
 			offset = <0x0c>;
 			mask = <0x01>;
 			label = "integrator:core_module";
@@ -84,12 +88,12 @@
 			interrupts = <8>;
 		};
 
-		uart@16000000 {
+		serial@16000000 {
 			reg = <0x16000000 0x1000>;
 			interrupts = <1>;
 		};
 
-		uart@17000000 {
+		serial@17000000 {
 			reg = <0x17000000 0x1000>;
 			interrupts = <2>;
 		};
@@ -104,35 +108,42 @@
 			interrupts = <4>;
 		};
 
-		syscon {
+		syscon@1a000000 {
 			/* Debug registers mapped as syscon */
 			compatible = "syscon", "simple-mfd";
 			reg = <0x1a000000 0x10>;
+			ranges = <0x0 0x1a000000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@4.0 {
+			led@4,0 {
 				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
 				offset = <0x04>;
 				mask = <0x01>;
 				label = "integrator:green0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@4.1 {
+			led@4,1 {
 				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
 				offset = <0x04>;
 				mask = <0x02>;
 				label = "integrator:yellow";
 				default-state = "off";
 			};
-			led@4.2 {
+			led@4,2 {
 				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
 				offset = <0x04>;
 				mask = <0x04>;
 				label = "integrator:red";
 				default-state = "off";
 			};
-			led@4.3 {
+			led@4,3 {
 				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
 				offset = <0x04>;
 				mask = <0x08>;
 				label = "integrator:green1";
diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts
index 1412a1a968fc..7072a70da00d 100644
--- a/arch/arm/boot/dts/integratorap-im-pd1.dts
+++ b/arch/arm/boot/dts/integratorap-im-pd1.dts
@@ -28,9 +28,13 @@
 	syscon@0 {
 		compatible = "arm,im-pd1-syscon", "syscon";
 		reg = <0x00000000 0x1000>;
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-		vco1: clock@00 {
+		vco1: clock-controller@0 {
 			compatible = "arm,impd1-vco1";
+			reg = <0x00 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x08>;
 			vco-offset = <0x00>;
@@ -38,8 +42,9 @@
 			clock-output-names = "IM-PD1-VCO1";
 		};
 
-		vco2: clock@04 {
+		vco2: clock-controller@4 {
 			compatible = "arm,impd1-vco2";
+			reg = <0x04 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x08>;
 			vco-offset = <0x04>;
@@ -157,7 +162,7 @@
 		};
 	};
 
-	uart@100000 {
+	serial@100000 {
 		compatible = "arm,pl011", "arm,primecell";
 		reg = <0x00100000 0x1000>;
 		interrupts-extended = <&impd1_vic 1>;
@@ -165,7 +170,7 @@
 		clock-names = "uartclk", "apb_pclk";
 	};
 
-	uart@200000 {
+	serial@200000 {
 		compatible = "arm,pl011", "arm,primecell";
 		reg = <0x00200000 0x1000>;
 		interrupts-extended = <&impd1_vic 2>;
@@ -173,12 +178,12 @@
 		clock-names = "uartclk", "apb_pclk";
 	};
 
-	ssp@300000 {
+	spi@300000 {
 		compatible = "arm,pl022", "arm,primecell";
 		reg = <0x00300000 0x1000>;
 		interrupts-extended = <&impd1_vic 3>;
 		clocks = <&impd1_sspclk>, <&sysclk>;
-		clock-names = "spiclk", "apb_pclk";
+		clock-names = "sspclk", "apb_pclk";
 	};
 
 	impd1_gpio0: gpio@400000 {
@@ -244,6 +249,7 @@
 		/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
 		max-memory-bandwidth = <40000000>;
 		memory-region = <&impd1_ram>;
+		dma-ranges;
 
 		port@0 {
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index 67d1f9b24a52..5b52d75bc6be 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -88,8 +88,9 @@
 		};
 
 		/* Oscillator on the core module, clocks the CPU core */
-		cmosc: cmosc@24M {
+		cmosc: clock-controller@8 {
 			compatible = "arm,syscon-icst525-integratorap-cm";
+			reg = <0x08 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x08>;
@@ -97,8 +98,9 @@
 		};
 
 		/* Auxilary oscillator on the core module, 32.369MHz at boot */
-		auxosc: auxosc@24M {
+		auxosc: clock-controller@1c {
 			compatible = "arm,syscon-icst525";
+			reg = <0x1c 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x1c>;
@@ -109,13 +111,17 @@
 	syscon {
 		compatible = "arm,integrator-ap-syscon", "syscon";
 		reg = <0x11000000 0x100>;
+		ranges = <0x0 0x11000000 0x100>;
+		#size-cells = <1>;
+		#address-cells = <1>;
 
 		/*
 		 * SYSCLK clocks PCIv3 bridge, system controller and the
 		 * logic modules.
 		 */
-		sysclk: apsys@24M {
+		sysclk: clock-controller@4 {
 			compatible = "arm,syscon-icst525-integratorap-sys";
+			reg = <0x04 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x1c>;
 			vco-offset = <0x04>;
@@ -123,8 +129,9 @@
 		};
 
 		/* One-bit control for the PCI bus clock (33 or 25 MHz) */
-		pciclk: pciclk@24M {
+		pciclk: clock-controller@4,8 {
 			compatible = "arm,syscon-icst525-integratorap-pci";
+			reg = <0x04 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x1c>;
 			vco-offset = <0x04>;
@@ -153,6 +160,7 @@
 
 	pci: pciv3@62000000 {
 		compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+		device_type = "pci";
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
@@ -210,14 +218,14 @@
 			clock-names = "apb_pclk";
 		};
 
-		uart0: uart@16000000 {
+		uart0: serial@16000000 {
 			compatible = "arm,pl010", "arm,primecell";
 			arm,primecell-periphid = <0x00041010>;
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart1: uart@17000000 {
+		uart1: serial@17000000 {
 			compatible = "arm,pl010", "arm,primecell";
 			arm,primecell-periphid = <0x00041010>;
 			clocks = <&uartclk>, <&pclk>;
@@ -254,7 +262,7 @@
 		lm0: bus@c0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xc0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xc0000000 0x10000000>;
 			reg = <0xc0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -262,7 +270,7 @@
 		lm1: bus@d0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xd0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xd0000000 0x10000000>;
 			reg = <0xd0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -270,7 +278,7 @@
 		lm2: bus@e0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xe0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xe0000000 0x10000000>;
 			reg = <0xe0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -278,7 +286,7 @@
 		lm3: bus@f0000000 {
 			compatible = "simple-bus";
 			ranges = <0x00000000 0xf0000000 0x10000000>;
-			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			dma-ranges = <0x00000000 0xf0000000 0x10000000>;
 			reg = <0xf0000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index 01fa229e1bd0..c011333eb165 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -92,8 +92,9 @@
 		};
 
 		/* Oscillator on the core module, clocks the CPU core */
-		cmcore: cmosc@24M {
+		cmcore: clock-controller@8 {
 			compatible = "arm,syscon-icst525-integratorcp-cm-core";
+			reg = <0x08 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x08>;
@@ -101,8 +102,9 @@
 		};
 
 		/* Oscillator on the core module, clocks the memory bus */
-		cmmem: cmosc@24M {
+		cmmem: clock-controller@8,12 {
 			compatible = "arm,syscon-icst525-integratorcp-cm-mem";
+			reg = <0x08 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x08>;
@@ -110,8 +112,9 @@
 		};
 
 		/* Auxilary oscillator on the core module, clocks the CLCD */
-		auxosc: auxosc@24M {
+		auxosc: clock-controller@1c {
 			compatible = "arm,syscon-icst525";
+			reg = <0x1c 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x1c>;
@@ -241,13 +244,13 @@
 			clock-names = "apb_pclk";
 		};
 
-		uart@16000000 {
+		serial@16000000 {
 			compatible = "arm,pl011", "arm,primecell";
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart@17000000 {
+		serial@17000000 {
 			compatible = "arm,pl011", "arm,primecell";
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
diff --git a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts
new file mode 100644
index 000000000000..765ab36e6f0c
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for ADI Engineering Coyote platform.
+ * Derived from boardfiles written by MontaVista software.
+ * Ethernet set-up from OpenWrt.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "ADI Engineering Coyote reference design";
+	compatible = "adieng,coyote", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* CHECKME: 16 MB SDRAM minimum, maybe the Coyote actually has more */
+		device_type = "memory";
+		reg = <0x00000000 0x01000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* These are switched around */
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 32 MB of Flash in 128 0x20000 sized blocks
+				 * mapped in at CS0 and CS1
+				 */
+				reg = <0 0x00000000 0x2000000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* CHECKME: guess this is Redboot FIS */
+					fis-index-block = <0x1ff>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from Coyote PCI boardfile.
+			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+			 * each handling all IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 6 */
+			<0x0800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 6 */
+			<0x0800 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 6 */
+			<0x0800 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 6 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 11 */
+			<0x1000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 11 */
+			<0x1000 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 11 */
+			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 11 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts
new file mode 100644
index 000000000000..6f5b4e4eb1cc
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Arcom/Eurotech Vulcan board.
+ * This board is a single board computer in the PC/104 form factor based on
+ * IXP425, and was released around 2005. It previously had the name "Mercury".
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Arcom/Eurotech Vulcan";
+	compatible = "arcom,vulcan", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		/* CHECKME: using a harddrive at /dev/sda1 as rootfs by default */
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootfstype=ext4 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 32 MB of Flash in 0x20000 byte blocks
+				 * mapped in at CS0 and CS1.
+				 *
+				 * The documentation mentions the existence
+				 * of a 16MB version, which we conveniently
+				 * ignore. Shout if you own one!
+				 */
+				reg = <0 0x00000000 0x2000000>;
+
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-t3 = <3>;
+				intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					fis-index-block = <0x1ff>;
+				};
+			};
+			sram@2,0 {
+				/* 256 KB SDRAM memory at CS2 */
+				compatible = "shared-dma-pool";
+				device_type = "memory";
+				reg = <2 0x00000000 0x40000>;
+				no-map;
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-t3 = <1>;
+				intel,ixp4xx-eb-t4 = <2>;
+				intel,ixp4xx-eb-ahb-split-transfers = <1>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+			};
+			serial@3,0 {
+				/*
+				 * 8250-compatible Exar XR16L2551 2 x UART
+				 *
+				 * CHECKME: if special tweaks are needed, then fix the
+				 * operating system to handle it.
+				 */
+				compatible = "exar,xr16l2551", "ns8250";
+				reg = <3 0x00000000 0x10>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+				clock-frequency = <1843200>;
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-t3 = <3>;
+				intel,ixp4xx-eb-cycle-type = <1>; /* Motorola cycles */
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+			};
+			gpio1: gpio@4,0 {
+				/*
+				 * MMIO GPIO in one byte
+				 */
+				compatible = "arcom,vulcan-gpio";
+				reg = <4 0x00000000 0x1>;
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+			};
+			watchdog@5,0 {
+				compatible = "maxim,max6369";
+				reg = <5 0x00000000 0x1>;
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from Vulcan PCI boardfile.
+			 *
+			 * We have 2 slots (IDSEL) 1 and 2 with one dedicated interrupt
+			 * per slot. This interrupt is shared (OR:ed) by all four pins.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 2 */
+			<0x0800 0 0 2 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 2 */
+			<0x0800 0 0 3 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 2 */
+			<0x0800 0 0 4 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 2 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 3 */
+			<0x1000 0 0 2 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 3 */
+			<0x1000 0 0 3 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 3 */
+			<0x1000 0 0 4 &gpio0 3 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 3 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts
new file mode 100644
index 000000000000..b9d46eb06507
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for D-Link DSM-G600 revision A based on IXP420
+ * NOTE: revision B of this device uses PowerPC and is NOT supported by
+ * this device tree.
+ *
+ * Inspired by the boardfile by Rod Whitby, Tower Technologies, Alessandro Zummo
+ * and Michael Westerhof.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DSM-G600 rev A";
+	compatible = "dlink,dsm-g600-a", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-power {
+			label = "dsmg600:green:power";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-wlan {
+			label = "dsmg600:green:wlan";
+			/* CHECKME: flagged as active low in the old board file */
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			/* We don't have WLAN trigger in the kernel (yet) */
+			linux,default-trigger = "netdev";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys_polled {
+		compatible = "gpio-keys-polled";
+
+		/*
+		 * According to the board file this key cannot handle interrupts and
+		 * need to be polled. Investigate if this is really the case or if
+		 * this can be moved adjacent to the ordinary gpio-keys above.
+		 */
+		button-power {
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		timeout-ms = <5000>;
+	};
+
+	soc {
+		bus@c4000000 {
+			/* The first 16MB region at CS0 on the expansion bus */
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 16 MB of Flash in 128 0x20000 sized blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/*
+					 * A boot log says the directory is at 0xfe0000
+					 * 0x7f * 0x20000 = 0xfe0000
+					 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from DSM-G600 PCI boardfile (dsmg600-pci.c)
+			 * We have slots (IDSEL) 1, 2, 3, 4 and pins 1, 2 and 3.
+			 * Only slot 3 have three IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 7  IRQ_TYPE_LEVEL_LOW>, /* INT E on slot 1 is irq 7 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 11 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 10 */
+			<0x1800 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 9 */
+			<0x1800 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 8 */
+			/* IDSEL 4 */
+			<0x2000 0 0 3 &gpio0 6  IRQ_TYPE_LEVEL_LOW>; /* INT F on slot 4 is irq 6 */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts
new file mode 100644
index 000000000000..5a5e16cc7335
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Freecom FSG-3 router.
+ * This machine is based on IXP425.
+ * This device tree is inspired by the board file by Rod Whitby.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Freecom FSG-3";
+	compatible = "freecom,fsg-3", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB memory */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		/* Boot from the first partition on the hard drive */
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootfstype=ext4 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-sync {
+			wakeup-source;
+			/* Closest approximation of what the key should do */
+			linux,code = <KEY_CONNECT>;
+			label = "sync";
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+		button-usb {
+			wakeup-source;
+			/* Unplug USB, closest approximation of what the key should do */
+			linux,code = <KEY_EJECTCD>;
+			label = "usb";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 12 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 13 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hwmon@28 {
+			/*
+			 * Temperature sensor and fan control chip.
+			 *
+			 * TODO: create a proper device tree binding for
+			 * the sensor and temperature zone and create a
+			 * zone with fan control.
+			 */
+			compatible = "winbond,w83781d";
+			reg = <0x28>;
+		};
+		rtc@6f {
+			compatible = "isil,isl1208";
+			reg = <0x6f>;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 4 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x400000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x3e0000 */
+					fis-index-block = <0x1f>;
+				};
+			};
+
+			/* Small syscon with some LEDs at CS2 */
+			syscon@2,0 {
+				compatible = "freecom,fsg-cs2-system-controller", "syscon";
+				reg = <2 0x0 0x200>;
+				reg-io-width = <2>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <2 0x0 0x0 0x200>;
+
+				led@0,0 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x01>;
+					label = "fsg:blue:wlan";
+					linux,default-trigger = "wlan";
+					default-state = "on";
+				};
+				led@0,1 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x02>;
+					label = "fsg:blue:wan";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,2 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x04>;
+					label = "fsg:blue:sata";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,3 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x04>;
+					label = "fsg:blue:usb";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,4 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x08>;
+					label = "fsg:blue:sync";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+				led@0,5 {
+					compatible = "register-bit-led";
+					reg = <0x00 0x02>;
+					mask = <0x10>;
+					label = "fsg:blue:ring";
+					linux,default-trigger = "";
+					default-state = "on";
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Written based on the FSG-3 PCI boardfile.
+			 * We have slots 12, 13 & 14 (IDSEL) with one IRQ each.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 12 */
+			<0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
+			<0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */
+			<0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */
+			<0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */
+			/* IDSEL 13 */
+			<0x6800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 7 */
+			<0x6800 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 7 */
+			<0x6800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 7 */
+			<0x6800 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 7 */
+			/* IDSEL 14 */
+			<0x7000 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 6 */
+			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 6 */
+			<0x7000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 6 */
+			<0x7000 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 6 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
new file mode 100644
index 000000000000..4d70f6afd13a
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Gateway 7001 AP based on IXP422
+ * Derived from boardfiles written by Imre Kaloz
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gateway 7001 AP";
+	compatible = "gateway,7001", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* second UART is the primary console */
+		serial0 = &uart1;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of flash
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x7e0000 */
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c)
+			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+			 * each handling all IRQs.
+			 */
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 11 */
+			<0x0800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 11 */
+			<0x0800 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 11 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 10 */
+			<0x1000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 10 */
+			<0x1000 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 10 */
+		};
+
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy2>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts
new file mode 100644
index 000000000000..97e3f25bb210
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Gateworks Avila GW2348 board.
+ * This machine is based on IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gateworks Avila GW2348";
+	compatible = "gateworks,gw2348", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-user {
+			label = "gw2348:green:user";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hwmon@28 {
+			compatible = "adi,ad7418";
+			reg = <0x28>;
+		};
+		rtc: ds1672@68 {
+			compatible = "dallas,ds1672";
+			reg = <0x68>;
+		};
+		eeprom@51 {
+			compatible = "atmel,24c08";
+			reg = <0x51>;
+			pagesize = <16>;
+			size = <1024>;
+			read-only;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+			ide@1,0 {
+				compatible = "intel,ixp4xx-compact-flash";
+				/*
+				 * Set up expansion bus config to a really slow timing.
+				 * The CF driver will dynamically reconfigure these timings
+				 * depending on selected PIO mode (0-4).
+				 */
+				intel,ixp4xx-eb-t1 = <3>; // 3 cycles extra address phase
+				intel,ixp4xx-eb-t2 = <3>; // 3 cycles extra setup phase
+				intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
+				intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
+				intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
+				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+				intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+				intel,ixp4xx-eb-mux-address-and-data = <0>;
+				intel,ixp4xx-eb-ahb-split-transfers = <0>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+				/* First register set is CMD second is CTL (notice it uses CS2) */
+				reg = <1 0x00000000 0x1000000>, <2 0x00000000 0x1000000>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+			};
+			/*
+			 * FIXME: Latch LEDs or extra UARTs at CS4
+			 */
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from Avila PCI boardfile.
+			 *
+			 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+			<0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+			<0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
+			/* IDSEL 4 */
+			<0x2000 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 4 is irq 8 */
+			<0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 4 is irq 11 */
+			<0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 4 is irq 10 */
+			<0x2000 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 4 is irq 9 */
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts
new file mode 100644
index 000000000000..9ec0169bacf8
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Goramo MultiLink Router
+ * There are two variants:
+ * - MultiLink Basic (a box)
+ * - MultiLink Max (19" rack mount)
+ * This device tree supports MultiLink Basic.
+ * This machine is based on IXP425.
+ * This is one of the few devices supporting the IXP4xx High-Speed Serial
+ * (HSS) link for a V.35 WAN interface.
+ * The hardware originates in Poland.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Goramo MultiLink Router";
+	compatible = "goramo,multilink-router", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/*
+		 * 64 MB of RAM according to the manual. The MultiLink
+		 * Max has 128 MB.
+		 */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	/*
+	 * 74HC4094 which is used as a rudimentary GPIO expander
+	 * FIXME:
+	 * - Create device tree bindings for this as GPIO expander
+	 * - Write a pure DT GPIO driver using these bindings
+	 * - Support cascading in the style of gpio-74x164.c (cannot be reused, very different)
+	 */
+	gpio_74: gpio-74hc4094 {
+		compatible = "nxp,74hc4094";
+		cp-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+		d-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		str-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		/* oe-gpios is optional */
+		gpio-controller;
+		#gpio-cells = <2>;
+		/* We are not cascaded */
+		registers-number = <1>;
+		gpio-line-names = "CONTROL_HSS0_CLK_INT", "CONTROL_HSS1_CLK_INT", "CONTROL_HSS0_DTR_N",
+				"CONTROL_HSS1_DTR_N", "CONTROL_EXT", "CONTROL_AUTO_RESET",
+				"CONTROL_PCI_RESET_N", "CONTROL_EEPROM_WC_N";
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * The device has 4 slots (IDSEL) with one dedicated IRQ per slot.
+			 * The slots have Ethernet, Ethernet, NEC and MPCI.
+			 * The IDSELs are 11, 12, 13, 14.
+			 */
+			interrupt-map =
+			/* IDSEL 11 - Ethernet A */
+			<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
+			<0x5800 0 0 2 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 11 is irq 4 */
+			<0x5800 0 0 3 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 11 is irq 4 */
+			<0x5800 0 0 4 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 11 is irq 4 */
+			/* IDSEL 12 - Ethernet B */
+			<0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
+			<0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */
+			<0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */
+			<0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */
+			/* IDSEL 13 - MPCI */
+			<0x6800 0 0 1 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 12 */
+			<0x6800 0 0 2 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 12 */
+			<0x6800 0 0 3 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 12 */
+			<0x6800 0 0 4 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 12 */
+			/* IDSEL 14 - NEC */
+			<0x7000 0 0 1 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 3 */
+			<0x7000 0 0 2 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 3 */
+			<0x7000 0 0 3 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 3 */
+			<0x7000 0 0 4 &gpio0 3 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 3 */
+		};
+
+		/* HSS links */
+		npe@c8006000 {
+			hss@0 {
+				status = "okay";
+				intel,queue-chl-rxtrig = <&qmgr 12>;
+				intel,queue-chl-txready = <&qmgr 34>;
+				intel,queue-pkt-rx = <&qmgr 13>;
+				intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>;
+				intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>;
+				intel,queue-pkt-txdone = <&qmgr 22>;
+				/* The Goramo GPIO-based clock etc control */
+				cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+				rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+				dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+				dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>;
+				clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>;
+			};
+			hss@1 {
+				status = "okay";
+				intel,queue-chl-rxtrig = <&qmgr 10>;
+				intel,queue-chl-txready = <&qmgr 35>;
+				intel,queue-pkt-rx = <&qmgr 0>;
+				intel,queue-pkt-tx = <&qmgr 5>, <&qmgr 6>, <&qmgr 7>, <&qmgr 8>;
+				intel,queue-pkt-rxfree = <&qmgr 1>, <&qmgr 2>, <&qmgr 3>, <&qmgr 4>;
+				intel,queue-pkt-txdone = <&qmgr 9>;
+				/* The Goramo GPIO-based clock etc control */
+				cts-gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+				rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+				dcd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+				dtr-gpios = <&gpio_74 3 GPIO_ACTIVE_LOW>;
+				clk-internal-gpios = <&gpio_74 1 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 32>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 33>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts
new file mode 100644
index 000000000000..8da6823e1dbe
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Iomega NAS 100D
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Iomega NAS 100D";
+	compatible = "iom,nas-100d", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-wlan {
+			label = "nas100d:red:wlan";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			/* We don't have WLAN trigger in the kernel (yet) */
+			linux,default-trigger = "netdev";
+		};
+		led-disk {
+			label = "nas100d:red:disk";
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "disk-activity";
+		};
+		led-power {
+			label = "nas100d:red:power";
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		timeout-ms = <5000>;
+	};
+
+	soc {
+		bus@c4000000 {
+			/* The first 16MB region at CS0 on the expansion bus */
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of Flash in 0x20000 byte blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x7e0000 */
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from NAS 100D PCI boardfile (nas100d-pci.c)
+			 * We have slots (IDSEL) 1, 2 and 3 and pins 1, 2 and 3.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+			<0x1800 0 0 3 &gpio0 7  IRQ_TYPE_LEVEL_LOW>; /* INT C on slot 3 is irq 7 */
+		};
+
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts
new file mode 100644
index 000000000000..194945748dc3
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDP425 also known as IXCDP1100 Control Plane
+ * processor reference design.
+ *
+ * This platform has the codename "Richfield".
+ *
+ * This machine is based on a 533 MHz IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Intel IXDP425/IXCDP1100 Richfield Reference Design";
+	compatible = "intel,ixdp425", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts
new file mode 100644
index 000000000000..7011fea6205b
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDPG425 reference design.
+ * Derived from boardfiles written by MontaVista software.
+ * Ethernet set-up from OpenWrt.
+ *
+ * The device has 4 x FXS RJ11 ports for analog phones for
+ * internet telephony. (Not supported yet.)
+ *
+ * The device has 9 status LEDs we do not support yet.
+ *
+ * This device is very similar to ADI engingeering Coyote.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Intel IXDPG425 reference design";
+	compatible = "intel,ixdpg425", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * CHECKME: the product brief says 16MB in a flash
+				 * socket.
+				 */
+				reg = <0 0x00000000 0x1000000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* CHECKME: guess this is Redboot FIS */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from IXDPG425 PCI boardfile.
+			 * We have slots (IDSEL) 12, 13 and 14 with one assigned IRQ
+			 * for 12 & 13 and one for 14.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 12 */
+			<0x6000 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 7 */
+			<0x6000 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 7 */
+			<0x6000 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 7 */
+			<0x6000 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 7 */
+			/* IDSEL 13 */
+			<0x6800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 7 */
+			<0x6800 0 0 2 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 7 */
+			<0x6800 0 0 3 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 7 */
+			<0x6800 0 0 4 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 7 */
+			/* IDSEL 14 */
+			<0x7000 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 6 */
+			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 6 */
+			<0x7000 0 0 3 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 6 */
+			<0x7000 0 0 4 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 6 */
+		};
+
+		/*
+		 * CHECKME: this ethernet setup seems dubious. Photos of the board shows some kind
+		 * of Realtek DSA switch on the board.
+		 */
+
+		/* EthB */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
index 8fcd95805ff4..da1e93212b86 100644
--- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
@@ -90,20 +90,73 @@
 		timeout-ms = <5000>;
 	};
 
-	/* The first 16MB region on the expansion bus */
-	flash@50000000 {
-		compatible = "intel,ixp4xx-flash", "cfi-flash";
-		bank-width = <2>;
-		/*
-		 * 8 MB of Flash in 0x20000 byte blocks
-		 * mapped in at 0x50000000
-		 */
-		reg = <0x50000000 0x800000>;
-
-		partitions {
-			compatible = "redboot-fis";
-			/* Eraseblock at 0x7e0000 */
-			fis-index-block = <0x3f>;
+	gpio-beeper {
+		compatible = "gpio-beeper";
+		gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	soc {
+		bus@c4000000 {
+			/* The first 16MB region at CS0 on the expansion bus */
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of Flash in 0x20000 byte blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x7e0000 */
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant
+			 * We have slots (IDSEL) 1, 2 and 3.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 11 */
+			<0x1000 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 8 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+			<0x1800 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+			<0x1800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 3 is irq 8 */
+		};
+
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts
new file mode 100644
index 000000000000..4aba9e0214a0
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Linksys WRV54G router
+ * Also known as Gemtek GTWX5715
+ * Based on a board file by George T. Joseph and other patches.
+ * This machine is based on IXP425.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Linksys WRV54G / Gemtek GTWX5715";
+	compatible = "linksys,wrv54g", "gemtek,gtwx5715", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB memory */
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	aliases {
+		/* UART2 is the primary console */
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	/* There is an unpopulated LED slot (3) connected to GPIO 8 */
+	leds {
+		compatible = "gpio-leds";
+		led-power {
+			label = "wrv54g:yellow:power";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-wireless {
+			label = "wrv54g:yellow:wireless";
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		led-internet {
+			label = "wrv54g:yellow:internet";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		led-dmz {
+			label = "wrv54g:green:dmz";
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	/* This set-up comes from an OpenWrt patch */
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		switch@0 {
+			compatible = "micrel,ks8995";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 8 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x00800000>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					/*
+					 * Partition info from a boot log
+					 * CHECKME: not using redboot? FIS index 0x3f @7e00000?
+					 */
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "boot";
+						reg = <0x0 0x140000>;
+						read-only;
+					};
+					partition@140000 {
+						label = "linux";
+						reg = <0x140000 0x100000>;
+						read-only;
+					};
+					partition@240000 {
+						label = "root";
+						reg = <0x240000 0x480000>;
+						read-write;
+					};
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * We have up to 2 slots (IDSEL) with 2 swizzled IRQs.
+			 * Derived from the GTWX5715 PCI boardfile.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 0 */
+			<0x0000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 0 is irq 10 */
+			<0x0000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 0 is irq 11 */
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 1 is irq 10 */
+		};
+
+		/*
+		 * EthB - connected to the KS8995 switch ports 1-4
+		 * FIXME: the boardfile defines .phy_mask = 0x1e for this port to enable output to
+		 * all four switch ports, also using an out of tree multiphy patch.
+		 * Do we need a new binding and property for this?
+		 */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy4>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* Should be ports 1-4 on the KS8995 switch */
+				phy4: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				/* Should be port 5 on the KS8995 switch */
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC - connected to KS8995 switch port 5 */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
new file mode 100644
index 000000000000..19d56e9aec9d
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Netgear WG302v2 based on IXP422BB
+ * Derived from boardfiles written by Imre Kaloz
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Netgear WG302 v1";
+	compatible = "netgear,wg302v1", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM according to boot arguments */
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		/* The RedBoot comes up in 9600 baud so let's keep this */
+		bootargs = "console=ttyS0,9600n8";
+		stdout-path = "uart1:9600n8";
+	};
+
+	aliases {
+		/* These are switched around */
+		serial0 = &uart1;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of Flash in 64 0x20000 sized blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x800000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					fis-index-block = <0x3f>;
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c)
+			 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
+			 * each handling all IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */
+			<0x0800 0 0 2 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 8 */
+			<0x0800 0 0 3 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 8 */
+			<0x0800 0 0 4 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 9 */
+			<0x1000 0 0 2 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 9 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 9 */
+			<0x1000 0 0 4 &gpio0 9 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 2 is irq 9 */
+		};
+
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy30>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy30: ethernet-phy@30 {
+					reg = <30>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
new file mode 100644
index 000000000000..c550c421b659
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+
+/ {
+	model = "Welltech EPBX100";
+	compatible = "welltech,epbx100", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/ram0 initrd=0x00800000,9M";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 16 MB of Flash
+				 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "RedBoot";
+						reg = <0x00000000 0x00080000>;
+						read-only;
+					};
+					partition@80000 {
+						label = "zImage";
+						reg = <0x00080000 0x00100000>;
+						read-only;
+					};
+					partition@180000 {
+						label = "ramdisk";
+						reg = <0x00180000 0x00300000>;
+						read-only;
+					};
+					partition@480000 {
+						label = "User";
+						reg = <0x00480000 0x00b60000>;
+						read-only;
+					};
+					partition@fe0000 {
+						label = "FIS directory";
+						reg = <0x00fe0000 0x001f000>;
+						read-only;
+					};
+					partition@fff000 {
+						label = "RedBoot config";
+						reg = <0x00fff000 0x0001000>;
+						read-only;
+					};
+				};
+			};
+		};
+
+		/* LAN port */
+		ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy5: ethernet-phy@5 {
+					reg = <5>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel-ixp42x.dtsi
index a9622ca850cc..84cee8ec3ab8 100644
--- a/arch/arm/boot/dts/intel-ixp42x.dtsi
+++ b/arch/arm/boot/dts/intel-ixp42x.dtsi
@@ -7,6 +7,15 @@
 
 / {
 	soc {
+		bus@c4000000 {
+			compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
+			reg = <0xc4000000 0x30>;
+		};
+
+		pci@c0000000 {
+			compatible = "intel,ixp42x-pci";
+		};
+
 		interrupt-controller@c8003000 {
 			compatible = "intel,ixp42x-interrupt";
 		};
diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
index ba1163a1e1e7..1db849515f9e 100644
--- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
+++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
@@ -76,19 +76,124 @@
 		};
 	};
 
-	flash@50000000 {
-		compatible = "intel,ixp4xx-flash", "cfi-flash";
-		bank-width = <2>;
-		/*
-		 * 32 MB of Flash in 0x20000 byte blocks
-		 * mapped in at 0x50000000
-		 */
-		reg = <0x50000000 0x2000000>;
-
-		partitions {
-			compatible = "redboot-fis";
-			/* Eraseblock at 0x1fe0000 */
-			fis-index-block = <0xff>;
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/*
+				 * 32 MB of Flash in 0x20000 byte blocks
+				 * mapped in at CS0 and CS1
+				 */
+				reg = <0 0x00000000 0x2000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x1fe0000 */
+					fis-index-block = <0xff>;
+				};
+			};
+			ide@3,0 {
+				compatible = "intel,ixp4xx-compact-flash";
+				/*
+				 * Set up expansion bus config to a really slow timing.
+				 * The CF driver will dynamically reconfigure these timings
+				 * depending on selected PIO mode (0-4).
+				 */
+				intel,ixp4xx-eb-t1 = <3>; // 3 cycles extra address phase
+				intel,ixp4xx-eb-t2 = <3>; // 3 cycles extra setup phase
+				intel,ixp4xx-eb-t3 = <15>; // 15 cycles extra strobe phase
+				intel,ixp4xx-eb-t4 = <3>; // 3 cycles extra hold phase
+				intel,ixp4xx-eb-t5 = <15>; // 15 cycles extra recovery phase
+				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+				intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+				intel,ixp4xx-eb-mux-address-and-data = <0>;
+				intel,ixp4xx-eb-ahb-split-transfers = <0>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+				/* First register set is CMD second is CTL */
+				reg = <3 0xe00000 0x40000>, <3 0xe40000 0x40000>;
+				interrupt-parent = <&gpio0>;
+				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * In the boardfile for the Cambria from OpenWRT the interrupts
+			 * are assigned one per IDSEL, so all 4 interrupts from IDSEL
+			 * 1 are connected to IRQ 11, all 4 interrupts from IDSEL 2
+			 * connected to IRQ 10 etc. I find this highly unlikely so I
+			 * have instead assumed that they are rotated (swizzled) like
+			 * this with 11, 10, 9, 8 for the 4 pins on IDSEL 1 etc.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+			<0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+			<0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
+			/* IDSEL 4 */
+			<0x2000 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 8 */
+			<0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+			<0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+			<0x2000 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 9 */
+			/* IDSEL 6 */
+			<0x3000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 10 */
+			<0x3000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 9 */
+			<0x3000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 8 */
+			<0x3000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 11 */
+			/* IDSEL 15 */
+			<0x7800 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 8 */
+			<0x7800 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 11 */
+			<0x7800 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 10 */
+			<0x7800 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 3 is irq 9 */
+		};
+
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
+		};
+
+		ethernet@c800c000 {
+			status = "okay";
+			queue-rx = <&qmgr 2>;
+			queue-txready = <&qmgr 19>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy2>;
+			intel,npe-handle = <&npe 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts
new file mode 100644
index 000000000000..4703a8b24765
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel KIXRP435 Control Plane
+ * processor reference design.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp43x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Intel KIXRP435 Reference Design";
+	compatible = "intel,kixrp435", "intel,ixp43x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 16 MB of Flash mapped in at CS0 */
+				reg = <0 0x00000000 0x1000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x0fe0000 */
+					fis-index-block = <0x7f>;
+				};
+			};
+		};
+
+		/* CHECKME: ethernet set-up taken from Gateworks Cambria */
+		ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+			};
+		};
+
+		ethernet@c800c000 {
+			status = "okay";
+			queue-rx = <&qmgr 2>;
+			queue-txready = <&qmgr 19>;
+			phy-mode = "rgmii";
+			phy-handle = <&phy2>;
+			intel,npe-handle = <&npe 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp43x.dtsi b/arch/arm/boot/dts/intel-ixp43x.dtsi
index 494fb2ff57a0..60bf9903e0f8 100644
--- a/arch/arm/boot/dts/intel-ixp43x.dtsi
+++ b/arch/arm/boot/dts/intel-ixp43x.dtsi
@@ -8,6 +8,16 @@
 
 / {
 	soc {
+		bus@c4000000 {
+			compatible = "intel,ixp43x-expansion-bus-controller", "syscon";
+			/* Uses at least up to 0x230 */
+			reg = <0xc4000000 0x1000>;
+		};
+
+		pci@c0000000 {
+			compatible = "intel,ixp43x-pci";
+		};
+
 		interrupt-controller@c8003000 {
 			compatible = "intel,ixp43x-interrupt";
 		};
diff --git a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
index f8cd506659dc..1dd4a65cb7a6 100644
--- a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
+++ b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
@@ -9,6 +9,17 @@
 
 / {
 	soc {
+		bus@c4000000 {
+			compatible = "intel,ixp46x-expansion-bus-controller", "syscon";
+			/* Uses at least up to 0x124 */
+			reg = <0xc4000000 0x1000>;
+		};
+
+		rng@70002100 {
+			compatible = "intel,ixp46x-rng";
+			reg = <0x70002100 4>;
+		};
+
 		interrupt-controller@c8003000 {
 			compatible = "intel,ixp43x-interrupt";
 		};
@@ -30,5 +41,46 @@
 			interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
+
+		/* This is known as EthB1 */
+		ethernet@c800d000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800d000 0x1000>;
+			status = "disabled";
+			intel,npe = <1>;
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+		};
+
+		/* This is known as EthB2 */
+		ethernet@c800e000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800e000 0x1000>;
+			status = "disabled";
+			intel,npe = <2>;
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+		};
+
+		/* This is known as EthB3 */
+		ethernet@c800f000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800f000 0x1000>;
+			status = "disabled";
+			intel,npe = <3>;
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+		};
+
+		ptp-timer@c8010000 {
+			compatible = "intel,ixp46x-ptp-timer";
+			reg = <0xc8010000 0x1000>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>, <7 IRQ_TYPE_EDGE_FALLING>;
+			interrupt-names = "master", "slave";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/intel-ixp46x-ixdp465.dts b/arch/arm/boot/dts/intel-ixp46x-ixdp465.dts
new file mode 100644
index 000000000000..a062cd1a6588
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp46x-ixdp465.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the Intel IXDP465 Control Plane processor reference
+ * design, codename "BMP".
+ */
+
+/dts-v1/;
+
+#include "intel-ixp45x-ixp46x.dtsi"
+#include "intel-ixp4xx-reference-design.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Intel IXDP465 BMP Reference Design";
+	compatible = "intel,ixdp465", "intel,ixp46x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/* Enable writes on the expansion bus */
+				intel,ixp4xx-eb-write-enable = <1>;
+				/* 32 MB of Flash mapped in at CS0 and CS1 */
+				reg = <0 0x00000000 0x2000000>;
+
+				partitions {
+					compatible = "redboot-fis";
+					/* Eraseblock at 0x1fe0000 */
+					fis-index-block = <0xff>;
+				};
+			};
+		};
+		/* TODO: configure ethernet etc */
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi
new file mode 100644
index 000000000000..31c0a69771c4
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree include file for Intel reference designs for the
+ * XScale Network Processors in the IXP 4xx series. Common device
+ * set-up for IXDP425, IXCDP1100, KIXRP435 and IXDP465.
+ */
+
+/ {
+	memory@0 {
+		/*
+		 * The board supports up to 256 MB of memory. Here we put in
+		 * 64 MB and this may be modified by the boot loader.
+		 */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eeprom@50 {
+			/*
+			 * Philips PCF8582C-2T/03 512byte I2C EEPROM
+			 * should behave like an Atmel 24c04.
+			 */
+			compatible = "atmel,24c04";
+			reg = <0x50>;
+			pagesize = <16>;
+			size = <512>;
+			read-only;
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			/* Flash memory defined per-variant */
+			nand-controller@3,0 {
+				/* Some designs have a NAND on CS3 enable it here if present */
+				status = "disabled";
+
+				/*
+				 * gen_nand needs to be extended and documented to get
+				 * command byte = 1 and address byte = 2 from the device
+				 * tree.
+				 */
+				compatible = "gen_nand";
+
+				/* Expansion bus set-up */
+				intel,ixp4xx-eb-t1 = <0>;
+				intel,ixp4xx-eb-t2 = <0>;
+				intel,ixp4xx-eb-t3 = <1>; // 1 cycle extra strobe phase
+				intel,ixp4xx-eb-t4 = <0>;
+				intel,ixp4xx-eb-t5 = <0>;
+				intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
+				intel,ixp4xx-eb-byte-access-on-halfword = <0>;
+				intel,ixp4xx-eb-mux-address-and-data = <0>;
+				intel,ixp4xx-eb-ahb-split-transfers = <0>;
+				intel,ixp4xx-eb-write-enable = <1>;
+				intel,ixp4xx-eb-byte-access = <1>;
+
+				/* 512 bytes memory window */
+				reg = <3 0x00000000 0x200>;
+				nand-on-flash-bbt;
+				nand-ecc-mode = "soft_bch";
+				nand-ecc-step-size = <512>;
+				nand-ecc-strength = <4>;
+				nce-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* NCE */
+
+				label = "ixp400 NAND";
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					fs@0 {
+						label = "ixp400 NAND FS 0";
+						reg = <0x0 0x800000>;
+					};
+					fs@800000 {
+						label = "ixp400 NAND FS 1";
+						reg = <0x800000 0x0>;
+					};
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			/*
+			 * Taken from IXDP425 PCI boardfile.
+			 * PCI slots on the BIXMB425BD base card.
+			 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
+			 */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 1 */
+			<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
+			<0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
+			<0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
+			<0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
+			/* IDSEL 2 */
+			<0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
+			<0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
+			<0x1000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
+			<0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
+			/* IDSEL 3 */
+			<0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
+			<0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
+			<0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
+			<0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
+			/* IDSEL 4 */
+			<0x2000 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 4 is irq 8 */
+			<0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 4 is irq 11 */
+			<0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 4 is irq 10 */
+			<0x2000 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 4 is irq 9 */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel-ixp4xx.dtsi
index d4a09584f417..51a716c59669 100644
--- a/arch/arm/boot/dts/intel-ixp4xx.dtsi
+++ b/arch/arm/boot/dts/intel-ixp4xx.dtsi
@@ -14,12 +14,73 @@
 		compatible = "simple-bus";
 		interrupt-parent = <&intcon>;
 
+		/*
+		 * The IXP4xx expansion bus is a set of up to 7 each up to 16MB
+		 * windows in the 256MB space from 0x50000000 to 0x5fffffff.
+		 */
+		bus@c4000000 {
+			/* compatible and reg filled in by per-soc device tree */
+			native-endian;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x50000000 0x01000000>,
+				 <1 0x0 0x51000000 0x01000000>,
+				 <2 0x0 0x52000000 0x01000000>,
+				 <3 0x0 0x53000000 0x01000000>,
+				 <4 0x0 0x54000000 0x01000000>,
+				 <5 0x0 0x55000000 0x01000000>,
+				 <6 0x0 0x56000000 0x01000000>,
+				 <7 0x0 0x57000000 0x01000000>;
+			dma-ranges = <0 0x0 0x50000000 0x01000000>,
+				 <1 0x0 0x51000000 0x01000000>,
+				 <2 0x0 0x52000000 0x01000000>,
+				 <3 0x0 0x53000000 0x01000000>,
+				 <4 0x0 0x54000000 0x01000000>,
+				 <5 0x0 0x55000000 0x01000000>,
+				 <6 0x0 0x56000000 0x01000000>,
+				 <7 0x0 0x57000000 0x01000000>;
+		};
+
 		qmgr: queue-manager@60000000 {
 			compatible = "intel,ixp4xx-ahb-queue-manager";
 			reg = <0x60000000 0x4000>;
 			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pci@c0000000 {
+			/* compatible filled in by per-soc device tree */
+			reg = <0xc0000000 0x1000>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
+				     <9 IRQ_TYPE_LEVEL_HIGH>,
+				     <10 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			ranges =
+			/*
+			 * 64MB 32bit non-prefetchable memory 0x48000000-0x4bffffff
+			 * done in 4 chunks of 16MB each.
+			 */
+			<0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
+			/* 64KB I/O space at 0x4c000000 */
+			<0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
+
+			/*
+			 * This needs to map to the start of physical memory so
+			 * PCI devices can see all (hopefully) memory. This is done
+			 * using 4 1:1 16MB windows, so the RAM should not be more than
+			 * 64 MB for this to work. If your memory is anywhere else
+			 * than at 0x0 you need to alter this.
+			 */
+			dma-ranges =
+			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+			/* Each unique DTS using PCI must specify the swizzling */
+		};
+
 		uart0: serial@c8000000 {
 			compatible = "intel,xscale-uart";
 			reg = <0xc8000000 0x1000>;
@@ -34,6 +95,20 @@
 			no-loopback-test;
 		};
 
+		uart1: serial@c8001000 {
+			compatible = "intel,xscale-uart";
+			reg = <0xc8001000 0x1000>;
+			/*
+			 * The reg-offset and reg-shift is a side effect
+			 * of running the platform in big endian mode.
+			 */
+			reg-offset = <3>;
+			reg-shift = <2>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <14745600>;
+			no-loopback-test;
+		};
+
 		gpio0: gpio@c8004000 {
 			compatible = "intel,ixp4xx-gpio";
 			reg = <0xc8004000 0x1000>;
@@ -61,9 +136,67 @@
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		npe@c8006000 {
+		npe: npe@c8006000 {
 			compatible = "intel,ixp4xx-network-processing-engine";
 			reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* NPE-A contains two high-speed serial links */
+			hss@0 {
+				compatible = "intel,ixp4xx-hss";
+				reg = <0>;
+				intel,npe-handle = <&npe 0>;
+				status = "disabled";
+			};
+
+			hss@1 {
+				compatible = "intel,ixp4xx-hss";
+				reg = <1>;
+				intel,npe-handle = <&npe 0>;
+				status = "disabled";
+			};
+
+			/* NPE-C contains a crypto accelerator */
+			crypto {
+				compatible = "intel,ixp4xx-crypto";
+				intel,npe-handle = <&npe 2>;
+				queue-rx = <&qmgr 30>;
+				queue-txready = <&qmgr 29>;
+			};
+		};
+
+		/* This is known as EthB */
+		ethernet@c8009000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc8009000 0x1000>;
+			status = "disabled";
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			intel,npe-handle = <&npe 1>;
+		};
+
+		/* This is known as EthC */
+		ethernet@c800a000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800a000 0x1000>;
+			status = "disabled";
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
+			intel,npe-handle = <&npe 2>;
+		};
+
+		/* This is known as EthA */
+		ethernet@c800c000 {
+			compatible = "intel,ixp4xx-ethernet";
+			reg = <0xc800c000 0x1000>;
+			status = "disabled";
+			intel,npe = <0>;
+			/* Dummy values that depend on firmware */
+			queue-rx = <&qmgr 0>;
+			queue-txready = <&qmgr 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 63cafd220dba..03caea6fc6ff 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -158,6 +158,8 @@
 	status = "okay";
 
 	phy3: ethernet-phy@3 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <3>;
 		micrel,led-mode = <1>;
 	};
@@ -179,7 +181,7 @@
 };
 
 &gpio2 {
-	touch-interrupt {
+	touch-interrupt-hog {
 		gpio-hog;
 		gpios = <12 GPIO_ACTIVE_LOW>;
 		input;
@@ -325,8 +327,8 @@
 
 	rcar_sound,dai {
 		dai0 {
-			playback = <&ssi1 &src3 &dvc1>;
-			capture = <&ssi0 &src2 &dvc0>;
+			playback = <&ssi1>, <&src3>, <&dvc1>;
+			capture = <&ssi0>, <&src2>, <&dvc0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index 66fec5f5d081..abd5aef8b87d 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -137,10 +137,10 @@
 };
 
 &spi0 {
-	nor_flash: n25q128a11@0 {
+	nor_flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "Micron,n25q128a11";
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
 		spi-max-frequency = <54000000>;
 		m25p,fast-read;
 		reg = <0>;
@@ -159,7 +159,7 @@
 };
 
 &mdio {
-	status = "ok";
+	status = "okay";
 	ethphy0: ethernet-phy@0 {
 		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
index ad15e77874b1..42cf74db673c 100644
--- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
@@ -12,9 +12,9 @@ qmss: qmss@2a40000 {
 	#size-cells = <1>;
 	clocks = <&chipclk13>;
 	ranges;
-	queue-range	= <0 0x2000>;
-	linkram0	= <0x100000 0x4000>;
-	linkram1	= <0 0x10000>;
+	queue-range = <0 0x2000>;
+	linkram0 = <0x100000 0x4000>;
+	linkram1 = <0 0x10000>;
 
 	qmgrs {
 		#address-cells = <1>;
@@ -95,7 +95,7 @@ qmss: qmss@2a40000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		pdsp0@0x2a10000 {
+		pdsp0@2a10000 {
 			reg = <0x2a10000 0x1000    /*iram */
 			       0x2a0f000 0x100     /*reg*/
 			       0x2a0c000 0x3c8	   /*intd */
@@ -176,40 +176,40 @@ netcp: netcp@24000000 {
 			interfaces {
 				gbe0: interface-0 {
 					slave-port = <0>;
-					link-interface	= <1>;
-					phy-handle	= <&ethphy0>;
+					link-interface = <1>;
+					phy-handle = <&ethphy0>;
 				};
 				gbe1: interface-1 {
 					slave-port = <1>;
-					link-interface	= <1>;
-					phy-handle	= <&ethphy1>;
+					link-interface = <1>;
+					phy-handle = <&ethphy1>;
 				};
 			};
 
 			secondary-slave-ports {
 				port-2 {
 					slave-port = <2>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 				port-3 {
 					slave-port = <3>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 				port-4 {
 					slave-port = <4>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 				port-5 {
 					slave-port = <5>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 				port-6 {
 					slave-port = <6>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 				port-7 {
 					slave-port = <7>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index b8f152e7af7f..65c32946c522 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -141,7 +141,7 @@
 			clock-names = "pcie";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			reg =  <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
+			reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
 			ranges = <0x82000000 0 0x60000000 0x60000000
 				  0 0x10000000>;
 
@@ -185,14 +185,14 @@
 		};
 
 		mdio: mdio@24200f00 {
-			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			compatible = "ti,keystone_mdio", "ti,davinci_mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x24200f00 0x100>;
 			status = "disabled";
 			clocks = <&clkcpgmac>;
 			clock-names = "fck";
-			bus_freq	= <2500000>;
+			bus_freq = <2500000>;
 		};
 		/include/ "keystone-k2e-netcp.dtsi"
 };
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 14e26a4fd62a..3a87b7943c70 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -392,7 +392,7 @@
 	pinctrl-0 = <&qspi_pins>;
 	cdns,rclk-en;
 
-	flash0: m25p80@0 {
+	flash0: flash@0 {
 		compatible = "s25fl512s", "jedec,spi-nor";
 		reg = <0>;
 		spi-tx-bus-width = <1>;
@@ -534,7 +534,7 @@
 &dss {
 	pinctrl-names = "default";
 	pinctrl-0 = <&vout_pins>;
-	status = "ok";
+	status = "okay";
 
 	port {
 		dpi_out: endpoint {
@@ -544,20 +544,15 @@
 	};
 };
 
-&k2g_clks {
-	/* on the board 22.5792MHz is connected to AUDOSC_IN */
-	assigned-clocks = <&k2g_clks 0x4c 2>;
-	assigned-clock-rates = <22579200>;
-};
-
 &mcasp2 {
 	#sound-dai-cells = <0>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcasp2_pins>;
 
-	assigned-clocks = <&k2g_clks 0x6 1>;
-	assigned-clock-parents = <&k2g_clks 0x6 2>;
+	assigned-clocks = <&k2g_clks 0x4c 2>, <&k2g_clks 0x6 1>;
+	assigned-clock-parents = <0>, <&k2g_clks 0x6 2>;
+	assigned-clock-rates = <22579200>, <0>;
 
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts
index 2a2d38cf0fff..bd84d7f0f2fe 100644
--- a/arch/arm/boot/dts/keystone-k2g-ice.dts
+++ b/arch/arm/boot/dts/keystone-k2g-ice.dts
@@ -325,7 +325,7 @@
 	cdns,rclk-en;
 	status = "okay";
 
-	flash0: m25p80@0 {
+	flash0: flash@0 {
 		compatible = "s25fl256s1", "jedec,spi-nor";
 		reg = <0>;
 		spi-tx-bus-width = <1>;
diff --git a/arch/arm/boot/dts/keystone-k2g-netcp.dtsi b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi
index d0e6a9a43402..f6306933ff42 100644
--- a/arch/arm/boot/dts/keystone-k2g-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi
@@ -125,7 +125,7 @@ netcp: netcp@4000000 {
 			interfaces {
 				gbe0: interface-0 {
 					slave-port = <0>;
-					link-interface	= <5>;
+					link-interface = <5>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 05a75019275e..380dd9d637ee 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -242,7 +242,7 @@
 			status = "disabled";
 		};
 
-		msgmgr: msgmgr@2a00000 {
+		msgmgr: mailbox@2a00000 {
 			compatible = "ti,k2g-message-manager";
 			#mbox-cells = <2>;
 			reg-names = "queue_proxy_region",
@@ -254,7 +254,7 @@
 				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		pmmc: pmmc@2921c00 {
+		pmmc: system-controller@2921c00 {
 			compatible = "ti,k2g-sci";
 			/*
 			 * In case of rare platforms that does not use k2g as
@@ -262,7 +262,7 @@
 			 */
 			ti,system-reboot-controller;
 			mbox-names = "rx", "tx";
-			mboxes= <&msgmgr 5 2>,
+			mboxes = <&msgmgr 5 2>,
 				<&msgmgr 0 0>;
 			reg-names = "debug_messages";
 			reg = <0x02921c00 0x400>;
@@ -272,7 +272,7 @@
 				#power-domain-cells = <1>;
 			};
 
-			k2g_clks: clocks {
+			k2g_clks: clock-controller {
 				compatible = "ti,k2g-sci-clk";
 				#clock-cells = <2>;
 			};
@@ -326,13 +326,13 @@
 
 		dss: dss@02540000 {
 			compatible = "ti,k2g-dss";
-			reg =	<0x02540000 0x400>,
+			reg = <0x02540000 0x400>,
 				<0x02550000 0x1000>,
 				<0x02557000 0x1000>,
 				<0x0255a800 0x100>,
 				<0x0255ac00 0x100>;
 			reg-names = "cfg", "common", "vid1", "ovr1", "vp1";
-			clocks =	<&k2g_clks 0x2 0>,
+			clocks = <&k2g_clks 0x2 0>,
 					<&k2g_clks 0x2 1>;
 			clock-names = "fck", "vp1";
 			interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>;
@@ -348,7 +348,7 @@
 
 		edma0: edma@2700000 {
 			compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
-			reg =	<0x02700000 0x8000>;
+			reg = <0x02700000 0x8000>;
 			reg-names = "edma3_cc";
 			interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
 					<GIC_SPI 216 IRQ_TYPE_EDGE_RISING>,
@@ -367,19 +367,19 @@
 
 		edma0_tptc0: tptc@2760000 {
 			compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
-			reg =	<0x02760000 0x400>;
+			reg = <0x02760000 0x400>;
 			power-domains = <&k2g_pds 0x3f>;
 		};
 
 		edma0_tptc1: tptc@2768000 {
 			compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
-			reg =	<0x02768000 0x400>;
+			reg = <0x02768000 0x400>;
 			power-domains = <&k2g_pds 0x3f>;
 		};
 
 		edma1: edma@2728000 {
 			compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
-			reg =	<0x02728000 0x8000>;
+			reg = <0x02728000 0x8000>;
 			reg-names = "edma3_cc";
 			interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
 					<GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
@@ -402,13 +402,13 @@
 
 		edma1_tptc0: tptc@27b0000 {
 			compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
-			reg =	<0x027b0000 0x400>;
+			reg = <0x027b0000 0x400>;
 			power-domains = <&k2g_pds 0x4f>;
 		};
 
 		edma1_tptc1: tptc@27b8000 {
 			compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
-			reg =	<0x027b8000 0x400>;
+			reg = <0x027b8000 0x400>;
 			power-domains = <&k2g_pds 0x4f>;
 		};
 
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index ad4e22afe133..1f762af6f502 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -28,22 +28,22 @@
 
 	leds {
 		compatible = "gpio-leds";
-		debug1_1 {
+		led-debug-1-1 {
 			label = "keystone:green:debug1";
 			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
 		};
 
-		debug1_2 {
+		led-debug-1-2 {
 			label = "keystone:red:debug1";
 			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
 		};
 
-		debug2 {
+		led-debug-2 {
 			label = "keystone:blue:debug2";
 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
 		};
 
-		debug3 {
+		led-debug-3 {
 			label = "keystone:blue:debug3";
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
 		};
@@ -161,10 +161,10 @@
 };
 
 &spi0 {
-	nor_flash: n25q128a11@0 {
+	nor_flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "Micron,n25q128a11";
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
 		spi-max-frequency = <54000000>;
 		m25p,fast-read;
 		reg = <0>;
@@ -183,7 +183,7 @@
 };
 
 &mdio {
-	status = "ok";
+	status = "okay";
 	ethphy0: ethernet-phy@0 {
 		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
index d5a6c1f5633c..8a421c65f920 100644
--- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
@@ -12,9 +12,9 @@ qmss: qmss@2a40000 {
 	#size-cells = <1>;
 	clocks = <&chipclk13>;
 	ranges;
-	queue-range	= <0 0x4000>;
-	linkram0	= <0x100000 0x8000>;
-	linkram1	= <0x0 0x10000>;
+	queue-range = <0 0x4000>;
+	linkram0 = <0x100000 0x8000>;
+	linkram1 = <0x0 0x10000>;
 
 	qmgrs {
 		#address-cells = <1>;
@@ -112,7 +112,7 @@ qmss: qmss@2a40000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		pdsp0@0x2a10000 {
+		pdsp0@2a10000 {
 			reg = <0x2a10000 0x1000    /*iram */
 			       0x2a0f000 0x100     /*reg*/
 			       0x2a0c000 0x3c8	   /*intd */
@@ -150,7 +150,7 @@ netcp: netcp@2000000 {
 	#size-cells = <1>;
 
 	/* NetCP address range */
-	ranges  = <0 0x2000000 0x100000>;
+	ranges = <0 0x2000000 0x100000>;
 
 	clocks = <&clkpa>, <&clkcpgmac>;
 	clock-names = "pa_clk", "ethss_clk";
@@ -207,11 +207,11 @@ netcp: netcp@2000000 {
 			secondary-slave-ports {
 				port-2 {
 					slave-port = <2>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 				port-3 {
 					slave-port = <3>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
index 8a9447703310..da6d3934c2e8 100644
--- a/arch/arm/boot/dts/keystone-k2hk.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk.dtsi
@@ -282,14 +282,14 @@
 		};
 
 		mdio: mdio@2090300 {
-			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			compatible = "ti,keystone_mdio", "ti,davinci_mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x02090300 0x100>;
 			status = "disabled";
 			clocks = <&clkcpgmac>;
 			clock-names = "fck";
-			bus_freq	= <2500000>;
+			bus_freq = <2500000>;
 		};
 		/include/ "keystone-k2hk-netcp.dtsi"
 };
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index e200533d26a4..3a69f65de81e 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -110,10 +110,10 @@
 };
 
 &spi0 {
-	nor_flash: n25q128a11@0 {
+	nor_flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "Micron,n25q128a11";
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
 		spi-max-frequency = <54000000>;
 		m25p,fast-read;
 		reg = <0>;
@@ -132,7 +132,7 @@
 };
 
 &mdio {
-	status = "ok";
+	status = "okay";
 	ethphy0: ethernet-phy@0 {
 		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
index c1f982604145..5ec6680a533d 100644
--- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
@@ -12,9 +12,9 @@ qmss: qmss@2a40000 {
 	#size-cells = <1>;
 	clocks = <&chipclk13>;
 	ranges;
-	queue-range	= <0 0x2000>;
-	linkram0	= <0x100000 0x4000>;
-	linkram1	= <0x70000000 0x10000>; /* 1MB OSR mem */
+	queue-range = <0 0x2000>;
+	linkram0 = <0x100000 0x4000>;
+	linkram1 = <0x70000000 0x10000>; /* 1MB OSR mem */
 
 	qmgrs {
 		#address-cells = <1>;
@@ -94,7 +94,7 @@ qmss: qmss@2a40000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		pdsp0@0x2a10000 {
+		pdsp0@2a10000 {
 			reg = <0x2a10000 0x1000    /*iram */
 			       0x2a0f000 0x100     /*reg*/
 			       0x2a0c000 0x3c8	   /*intd */
@@ -174,24 +174,24 @@ netcp: netcp@26000000 {
 			interfaces {
 				gbe0: interface-0 {
 					slave-port = <0>;
-					link-interface	= <1>;
-					phy-handle	= <&ethphy0>;
+					link-interface = <1>;
+					phy-handle = <&ethphy0>;
 				};
 				gbe1: interface-1 {
 					slave-port = <1>;
-					link-interface	= <1>;
-					phy-handle	= <&ethphy1>;
+					link-interface = <1>;
+					phy-handle = <&ethphy1>;
 				};
 			};
 
 			secondary-slave-ports {
 				port-2 {
 					slave-port = <2>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 				port-3 {
 					slave-port = <3>;
-					link-interface	= <2>;
+					link-interface = <2>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index dff5fea72b2f..421a02bbc9d3 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -47,7 +47,7 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			reg = <0x02348400 0x100>;
-			clocks	= <&clkuart2>;
+			clocks = <&clkuart2>;
 			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
 		};
 
@@ -57,7 +57,7 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			reg = <0x02348800 0x100>;
-			clocks	= <&clkuart3>;
+			clocks = <&clkuart3>;
 			interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
 		};
 
@@ -388,14 +388,14 @@
 		};
 
 		mdio: mdio@26200f00 {
-			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			compatible = "ti,keystone_mdio", "ti,davinci_mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x26200f00 0x100>;
 			status = "disabled";
 			clocks = <&clkcpgmac>;
 			clock-names = "fck";
-			bus_freq	= <2500000>;
+			bus_freq = <2500000>;
 		};
 		/include/ "keystone-k2l-netcp.dtsi"
 };
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index fc9fdc857ae8..50789f9e2215 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -14,7 +14,7 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
-		serial0	= &uart0;
+		serial0 = &uart0;
 		spi0 = &spi0;
 		spi1 = &spi1;
 		spi2 = &spi2;
@@ -61,11 +61,11 @@
 	};
 
 	psci {
-		compatible	= "arm,psci";
-		method		= "smc";
-		cpu_suspend	= <0x84000001>;
-		cpu_off		= <0x84000002>;
-		cpu_on		= <0x84000003>;
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
 	};
 
 	soc0: soc@0 {
@@ -119,7 +119,7 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			reg = <0x02530c00 0x100>;
-			clocks	= <&clkuart0>;
+			clocks = <&clkuart0>;
 			interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
 		};
 
@@ -129,7 +129,7 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			reg = <0x02531000 0x100>;
-			clocks	= <&clkuart1>;
+			clocks = <&clkuart1>;
 			interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
 		};
 
@@ -301,7 +301,7 @@
 			clock-names = "pcie";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			reg =  <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
+			reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
 			ranges = <0x82000000 0 0x50000000 0x50000000
 				  0 0x10000000>;
 
diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi
index 396bcba08adb..705c0d7effed 100644
--- a/arch/arm/boot/dts/kirkwood-6192.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6192.dtsi
@@ -26,12 +26,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index faa05849a40d..8e311165fd13 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -26,12 +26,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index e84c54b77dea..e33723160ce7 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -30,12 +30,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			pcie1: pcie@2,0 {
@@ -48,12 +58,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 10>;
+				interrupt-names = "intx", "error";
+				interrupts = <10>, <45>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 18>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
index 299c147298c3..c3469a2fc58a 100644
--- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
+++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
@@ -26,12 +26,22 @@
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
+				interrupt-names = "intx", "error";
+				interrupts = <9>, <44>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie_intc 0>,
+						<0 0 0 2 &pcie_intc 1>,
+						<0 0 0 3 &pcie_intc 2>,
+						<0 0 0 4 &pcie_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
+
+				pcie_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts
index a7636fe28501..681343c1357a 100644
--- a/arch/arm/boot/dts/kirkwood-b3.dts
+++ b/arch/arm/boot/dts/kirkwood-b3.dts
@@ -187,7 +187,7 @@
 
 /* Wifi model has Atheros chipset on pcie port */
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-c200-v1.dts b/arch/arm/boot/dts/kirkwood-c200-v1.dts
new file mode 100644
index 000000000000..f59ff7578dfc
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-c200-v1.dts
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Ctera C200 V1 Board Description
+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Ctera C200 V1";
+	compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+
+		usb1 {
+			label = "USB1 Button";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2 {
+			label = "USB2 Button";
+			linux,code = <BTN_1>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-0 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-8 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-10 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port2>;
+		};
+
+		led-11 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port1>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth0port {
+	phy-handle = <&ethphy9>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@30 {
+		compatible = "s35390a";
+		reg = <0x30>;
+	};
+
+	lm63@4c {
+		compatible = "national,lm63";
+		reg = <0x4c>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy9: ethernet-phy@9 {
+		reg = <9>;
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <40>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x200000>;
+	};
+
+	partition@200000 {
+		label = "certificate";
+		reg = <0x0200000 0x100000>;
+	};
+
+	partition@300000 {
+		label = "preset_cfg";
+		reg = <0x0300000 0x100000>;
+	};
+
+	partition@400000 {
+		label = "dev_params";
+		reg = <0x0400000 0x100000>;
+	};
+
+	partition@500000 {
+		label = "active_bank";
+		reg = <0x0500000 0x0100000>;
+	};
+
+	partition@600000 {
+		label = "magic";
+		reg = <0x0600000 0x0100000>;
+	};
+
+	partition@700000 {
+		label = "bank1";
+		reg = <0x0700000 0x2800000>;
+	};
+
+	partition@2f00000 {
+		label = "bank2";
+		reg = <0x2f00000 0x2800000>;
+	};
+
+	/* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+	partition@5a00000 {
+		label = "reserved";
+		reg = <0x5a00000 0x2000000>;
+	};
+
+	partition@7a00000 {
+		label = "rootfs";
+		reg = <0x7a00000 0x8600000>;
+	};
+};
+
+&pinctrl {
+	/* Buzzer gpios are connected to two pins of buzzer.
+	 * This buzzer require a modulated signal from gpio.
+	 * Leave it as is due lack of proper driver.
+	 */
+	pmx_buzzer: pmx-buzzer {
+		marvell,pins = "mpp12", "mpp13";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp14", "mpp15", "mpp16", "mpp17", "mpp38",
+			       "mpp39", "mpp40", "mpp42", "mpp43", "mpp44",
+			       "mpp45", "mpp46", "mpp47";
+		marvell,function = "gpio";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp28", "mpp29", "mpp48", "mpp49";
+		marvell,function = "gpio";
+	};
+
+	pmx_poweroff: pmx-poweroff {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	port@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		#trigger-source-cells = <0>;
+
+		hub_port1: port@1 {
+			reg = <1>;
+			#trigger-source-cells = <0>;
+		};
+
+		hub_port2: port@2 {
+			reg = <2>;
+			#trigger-source-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6281.dts b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
index 2adb17c955aa..a9a8e6b744c7 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6281.dts
+++ b/arch/arm/boot/dts/kirkwood-db-88f6281.dts
@@ -18,7 +18,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-db-88f6282.dts b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
index f84a48539917..6dc6579d4524 100644
--- a/arch/arm/boot/dts/kirkwood-db-88f6282.dts
+++ b/arch/arm/boot/dts/kirkwood-db-88f6282.dts
@@ -18,7 +18,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
index b3ad3f607d31..0c0851cd9bec 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -78,7 +78,7 @@
 
 		spi@10600 {
 			status = "okay";
-			m25p80@0 {
+			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
@@ -211,18 +211,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan3";
+				reg = <1>;
+				label = "lan3";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan2";
+				reg = <2>;
+				label = "lan2";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "lan1";
+				reg = <3>;
+				label = "lan1";
 			};
 
 			port@4 {
@@ -232,7 +232,7 @@
 
 			port@6 {
 				reg = <6>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -251,6 +251,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
@@ -268,7 +269,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts
index f48609e95afe..3912f1b525b6 100644
--- a/arch/arm/boot/dts/kirkwood-ds112.dts
+++ b/arch/arm/boot/dts/kirkwood-ds112.dts
@@ -43,7 +43,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts
index 86907be70cf9..1d4256ef325d 100644
--- a/arch/arm/boot/dts/kirkwood-ds411.dts
+++ b/arch/arm/boot/dts/kirkwood-ds411.dts
@@ -47,7 +47,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 95af7aa1fdcb..aed20185fd7a 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -187,7 +187,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-km_common.dtsi b/arch/arm/boot/dts/kirkwood-km_common.dtsi
index 75dc83914f56..52baffe45f12 100644
--- a/arch/arm/boot/dts/kirkwood-km_common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-km_common.dtsi
@@ -39,7 +39,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-l-50.dts b/arch/arm/boot/dts/kirkwood-l-50.dts
index 0d81c43a6a73..9fd3581bb24b 100644
--- a/arch/arm/boot/dts/kirkwood-l-50.dts
+++ b/arch/arm/boot/dts/kirkwood-l-50.dts
@@ -223,18 +223,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan1";
+				reg = <1>;
+				label = "lan1";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan6";
+				reg = <2>;
+				label = "lan6";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "lan2";
+				reg = <3>;
+				label = "lan2";
 			};
 
 			port@4 {
@@ -254,7 +254,6 @@
 
 			port@6 {
 				reg = <6>;
-				label = "cpu";
 				phy-mode = "rgmii-id";
 				ethernet = <&eth1port>;
 				fixed-link {
@@ -282,18 +281,18 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan8";
+				reg = <1>;
+				label = "lan8";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan4";
+				reg = <2>;
+				label = "lan4";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "dmz";
+				reg = <3>;
+				label = "dmz";
 			};
 
 			switch1port5: port@5 {
@@ -330,6 +329,7 @@
 	ethernet1-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts
index 6158214a939a..8c2b540eaf4f 100644
--- a/arch/arm/boot/dts/kirkwood-laplug.dts
+++ b/arch/arm/boot/dts/kirkwood-laplug.dts
@@ -160,7 +160,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi
index 407d6d8b3a7f..b54c9980f636 100644
--- a/arch/arm/boot/dts/kirkwood-linkstation.dtsi
+++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi
@@ -156,7 +156,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
index 2f9660f3b457..27fd6e2337d5 100644
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -198,7 +198,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -221,6 +221,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 7b151acb9984..88b70ba1c8fe 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -10,6 +10,11 @@
 
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
+			/* Non-default UART pins */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp4", "mpp5";
+			};
+
 			pmx_power_hdd: pmx-power-hdd {
 				marvell,pins = "mpp10";
 				marvell,function = "gpo";
@@ -213,22 +218,11 @@
 &mdio {
 	status = "okay";
 
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
 	ethphy1: ethernet-phy@8 {
 		reg = <8>;
 	};
 };
 
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
-
 &eth1 {
 	status = "okay";
 	ethernet1-port@0 {
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index b80d12f6aa49..e87ea7146546 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -8,10 +8,10 @@
 	model = "MPL CEC4";
 	compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
-        memory {
-                device_type = "memory";
-                reg = <0x00000000 0x20000000>;
-        };
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
@@ -66,8 +66,8 @@
 			};
 		};
 
-                i2c@11000 {
-                        status = "okay";
+		i2c@11000 {
+			status = "okay";
 
 			rtc@51 {
 				compatible = "nxp,pcf8563";
@@ -79,7 +79,7 @@
 				reg = <0x57>;
 			};
 
-                };
+		};
 
 		serial@12000 {
 			status = "okay";
@@ -208,7 +208,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index 2e1a75348908..5a77286136c7 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -149,7 +149,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -166,11 +166,12 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nas2big.dts b/arch/arm/boot/dts/kirkwood-nas2big.dts
index 6a2934b7d0ce..0b0a15093146 100644
--- a/arch/arm/boot/dts/kirkwood-nas2big.dts
+++ b/arch/arm/boot/dts/kirkwood-nas2big.dts
@@ -131,7 +131,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/kirkwood-net2big.dts
index 3e3ac289e5b0..d5f6bb50ba11 100644
--- a/arch/arm/boot/dts/kirkwood-net2big.dts
+++ b/arch/arm/boot/dts/kirkwood-net2big.dts
@@ -46,11 +46,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts
index cba8a2b6f6d9..2497ad26b5b6 100644
--- a/arch/arm/boot/dts/kirkwood-net5big.dts
+++ b/arch/arm/boot/dts/kirkwood-net5big.dts
@@ -78,11 +78,11 @@
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 
 	netxbig-leds {
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
index b13aee570804..6cf76430cfab 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
@@ -78,11 +78,11 @@
 		};
 
 		clocks {
-		       g762_clk: g762-oscillator {
-				 compatible = "fixed-clock";
-				 #clock-cells = <0>;
-				 clock-frequency = <8192>;
-		       };
+			g762_clk: g762-oscillator {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <8192>;
+			};
 		};
 
 		i2c@11000 {
@@ -266,7 +266,7 @@
 
 /* Connected to NEC uPD720200 USB 3.0 controller */
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index 9b861c2e76c5..c1799a07816e 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -131,7 +131,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa310s.dts b/arch/arm/boot/dts/kirkwood-nsa310s.dts
new file mode 100644
index 000000000000..49da633a1bc0
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * ZyXEL NSA310S Board Description
+ * Copyright 2020-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ * Based upon the board setup file created by Peter Schildmann
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "ZyXEL NSA310S";
+	compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		copy {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-1 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usb-host";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_DISK;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ata1";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usb0_power: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	sata1_power: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SATA1 Power";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	thermal-zones {
+		disk-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&hdd_temp>;
+
+			trips {
+				disk_alert: disk-alert {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				disk_crit: disk-crit {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "htk,ht1382";
+		reg = <0x68>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+		phy-mode = "rgmii-id";
+		marvell,reg-init = <0x1 0x16 0x0 0x3>,
+				   <0x1 0x10 0x0 0x1017>,
+				   <0x1 0x11 0x0 0x4408>,
+				   <0x1 0x16 0x0 0x0>;
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x00c0000>;
+		read-only;
+	};
+	partition@c0000 {
+		label = "uboot_env";
+		reg = <0x00c0000 0x0080000>;
+	};
+	partition@140000 {
+		label = "ubi";
+		reg = <0x0140000 0x7ec0000>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp24", "mpp25", "mpp26";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp13", "mpp15", "mpp16", "mpp22", "mpp23",
+						"mpp28", "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_power: pmx-power {
+		marvell,pins = "mpp21", "mpp33";
+		marvell,function = "gpio";
+	};
+
+	pmx_pwr_off: pmx-pwr-off {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts
index b69b096f267b..652405e65006 100644
--- a/arch/arm/boot/dts/kirkwood-nsa320.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa320.dts
@@ -211,7 +211,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts
index 6f8085dbb1f4..371456de34b2 100644
--- a/arch/arm/boot/dts/kirkwood-nsa325.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
@@ -224,7 +224,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
index 8f73197f251a..ea3d36512e9f 100644
--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
@@ -150,7 +150,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
index 712d6042b132..f00325ffde07 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts
+++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
@@ -31,10 +31,10 @@
 			pinctrl-0 = <&pmx_usb_power>;
 			pinctrl-names = "default";
 
-                        pmx_usb_power: pmx-usb-power {
-                                marvell,pins = "mpp10";
-                                marvell,function = "gpo";
-                        };
+			pmx_usb_power: pmx-usb-power {
+				marvell,pins = "mpp10";
+				marvell,function = "gpo";
+			};
 		};
 
 		serial@12000 {
@@ -62,43 +62,43 @@
 	};
 
 	regulators {
-                compatible = "simple-bus";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                pinctrl-0 = <&pmx_usb_power>;
-                pinctrl-names = "default";
-
-                usb_power: regulator@0 {
-                        compatible = "regulator-fixed";
-                        reg = <0>;
-                        regulator-name = "USB VBUS";
-                        regulator-min-microvolt = <5000000>;
-                        regulator-max-microvolt = <5000000>;
-                        enable-active-high;
-                        regulator-always-on;
-                        regulator-boot-on;
-                        gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-                };
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "USB VBUS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+		};
 	};
 };
 
 &mdio {
-        status = "okay";
+	status = "okay";
 
-        ethphy0: ethernet-phy@8 {
-                reg = <8>;
-        };
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
 };
 
 &eth0 {
-        status = "okay";
-        ethernet0-port@0 {
-                phy-handle = <&ethphy0>;
-        };
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
index 9d88301daf0e..72edd47e19ff 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
@@ -19,7 +19,7 @@
 };
 
 &eth1 {
-      status = "disabled";
+	status = "disabled";
 };
 
 &switch {
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
index f1f8eee132e8..9d62f910cddf 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -48,7 +48,7 @@
 			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
 			/* No WP GPIO */
 		};
-       };
+	};
 };
 
 &nand {
@@ -105,7 +105,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -126,7 +126,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts
index c51cea883215..4ad412115a24 100644
--- a/arch/arm/boot/dts/kirkwood-rs212.dts
+++ b/arch/arm/boot/dts/kirkwood-rs212.dts
@@ -43,7 +43,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie1 {
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
index 217bd374e52b..9b6666020cdd 100644
--- a/arch/arm/boot/dts/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/kirkwood-synology.dtsi
@@ -198,7 +198,7 @@
 		spi@10600 {
 			status = "okay";
 
-			m25p80@0 {
+			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "st,m25p80", "jedec,spi-nor";
@@ -847,7 +847,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts
index fe63b3a03a72..ad093324e075 100644
--- a/arch/arm/boot/dts/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/kirkwood-t5325.dts
@@ -219,7 +219,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index 994cabcf4b51..1939462a5f48 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -86,7 +86,7 @@
 	status = "okay";
 
 	ethphy0: ethernet-phy@X {
-                /* overwrite reg property in board file */
+		/* overwrite reg property in board file */
 	};
 };
 
@@ -98,7 +98,7 @@
 };
 
 &pciec {
-        status = "okay";
+	status = "okay";
 };
 
 &pcie0 {
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index fca31a5d5ac7..815ef7719d13 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -24,9 +24,9 @@
 	};
 
 	aliases {
-	       gpio0 = &gpio0;
-	       gpio1 = &gpio1;
-	       i2c0 = &i2c0;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		i2c0 = &i2c0;
 	};
 
 	mbus@f1000000 {
@@ -279,15 +279,15 @@
 			clocks = <&gate_clk 8>;
 
 			xor00 {
-			      interrupts = <5>;
-			      dmacap,memcpy;
-			      dmacap,xor;
+				interrupts = <5>;
+				dmacap,memcpy;
+				dmacap,xor;
 			};
 			xor01 {
-			      interrupts = <6>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
+				interrupts = <6>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
 			};
 		};
 
@@ -299,15 +299,15 @@
 			clocks = <&gate_clk 16>;
 
 			xor00 {
-			      interrupts = <7>;
-			      dmacap,memcpy;
-			      dmacap,xor;
+				interrupts = <7>;
+				dmacap,memcpy;
+				dmacap,xor;
 			};
 			xor01 {
-			      interrupts = <8>;
-			      dmacap,memcpy;
-			      dmacap,xor;
-			      dmacap,memset;
+				interrupts = <8>;
+				dmacap,memcpy;
+				dmacap,xor;
+				dmacap,memset;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
new file mode 100644
index 000000000000..0f555eb45bda
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for the Kontron KSwitch D10 MMT 6G-2GS
+ */
+
+/dts-v1/;
+#include "lan966x-kontron-kswitch-d10-mmt.dtsi"
+
+/ {
+	model = "Kontron KSwitch D10 MMT 6G-2GS";
+	compatible = "kontron,kswitch-d10-mmt-6g-2gs", "kontron,s1921",
+		     "microchip,lan9668", "microchip,lan966";
+
+	aliases {
+		i2c0 = &i2c4;
+		i2c1 = &i2c1;
+	};
+
+	sfp0: sfp0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c4>;
+		los-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2500>;
+		tx-disable-gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in 0 2 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&sgpio_out 2 0 GPIO_ACTIVE_HIGH>;
+		rate-select1-gpios = <&sgpio_out 2 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpios = <&sgpio_in 1 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in 1 3 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2500>;
+		tx-disable-gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in 0 3 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&sgpio_out 2 2 GPIO_ACTIVE_HIGH>;
+		rate-select1-gpios = <&sgpio_out 2 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		pinctrl-0 = <&fc1_c_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c4: i2c@600 {
+		pinctrl-0 = <&fc4_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&gpio {
+	fc1_c_pins: fc1-c-i2c-pins {
+		/* SCL, SDA */
+		pins = "GPIO_47", "GPIO_48";
+		function = "fc1_c";
+	};
+
+	fc4_b_pins: fc4-b-i2c-pins {
+		/* SCL, SDA */
+		pins = "GPIO_57", "GPIO_58";
+		function = "fc4_b";
+	};
+};
+
+&port2 {
+	phys = <&serdes 2 SERDES6G(0)>;
+	sfp = <&sfp0>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&port3 {
+	phys = <&serdes 3 SERDES6G(1)>;
+	sfp = <&sfp1>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
new file mode 100644
index 000000000000..5feef9a59a79
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for the Kontron KSwitch D10 MMT 8G
+ */
+
+/dts-v1/;
+#include "lan966x-kontron-kswitch-d10-mmt.dtsi"
+
+/ {
+	model = "Kontron KSwitch D10 MMT 8G";
+	compatible = "kontron,kswitch-d10-mmt-8g", "kontron,s1921",
+		     "microchip,lan9668", "microchip,lan966";
+};
+
+&mdio0 {
+	phy2: ethernet-phy@3 {
+		reg = <3>;
+	};
+
+	phy3: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&port2 {
+	phys = <&serdes 2 SERDES6G(0)>;
+	phy-handle = <&phy2>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&port3 {
+	phys = <&serdes 3 SERDES6G(1)>;
+	phy-handle = <&phy3>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
new file mode 100644
index 000000000000..0097e72e3fb2
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common part of the device tree for the Kontron KSwitch D10 MMT
+ */
+
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	aliases {
+		serial0 = &usart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart0: serial@200 {
+		pinctrl-0 = <&usart0_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi3: spi@400 {
+		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+		cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gpio {
+	fc3_b_pins: fc3-b-pins {
+		/* SCK, MISO, MOSI */
+		pins = "GPIO_51", "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	miim_c_pins: miim-c-pins {
+		/* MDC, MDIO */
+		pins = "GPIO_59", "GPIO_60";
+		function = "miim_c";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1 */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34";
+		function = "sgpio_a";
+	};
+
+	sgpio_b_pins: sgpio-b-pins {
+		/* LD */
+		pins = "GPIO_64";
+		function = "sgpio_b";
+	};
+
+	usart0_pins: usart0-pins {
+		/* RXD, TXD */
+		pins = "GPIO_25", "GPIO_26";
+		function = "fc0_b";
+	};
+
+	usbs_a_pins: usbs-a-pins {
+		/* VBUS_DET */
+		pins = "GPIO_66";
+		function = "gpio";
+	};
+};
+
+&mdio0 {
+	pinctrl-0 = <&miim_c_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+	clock-frequency = <2500000>;
+	status = "okay";
+
+	phy4: ethernet-phy@5 {
+		reg = <5>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy5: ethernet-phy@6 {
+		reg = <6>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy6: ethernet-phy@7 {
+		reg = <7>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+
+	phy7: ethernet-phy@8 {
+		reg = <8>;
+		coma-mode-gpios = <&gpio 37 GPIO_OPEN_DRAIN>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phys = <&serdes 0 CU(0)>;
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	status = "okay";
+};
+
+&port1 {
+	phys = <&serdes 1 CU(1)>;
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	status = "okay";
+};
+
+&port4 {
+	phys = <&serdes 4 SERDES6G(2)>;
+	phy-handle = <&phy4>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port5 {
+	phys = <&serdes 5 SERDES6G(2)>;
+	phy-handle = <&phy5>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port6 {
+	phys = <&serdes 6 SERDES6G(2)>;
+	phy-handle = <&phy6>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&port7 {
+	phys = <&serdes 7 SERDES6G(2)>;
+	phy-handle = <&phy7>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>;
+	pinctrl-names = "default";
+	bus-frequency = <8000000>;
+	/* arbitrary range because all GPIOs are in software mode */
+	microchip,sgpio-port-ranges = <0 11>;
+	status = "okay";
+
+	sgpio_in: gpio@0 {
+		ngpios = <128>;
+	};
+
+	sgpio_out: gpio@1 {
+		ngpios = <128>;
+	};
+};
+
+&switch {
+	status = "okay";
+};
+
+&udc {
+	pinctrl-0 = <&usbs_a_pins>;
+	pinctrl-names = "default";
+	atmel,vbus-gpio = <&gpio 66 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts
new file mode 100644
index 000000000000..8804e8ba5370
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-pcb8290.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x-pcb8290.dts - Device Tree file for LAN966X-PCB8290 board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Horatiu Vultur <horatiu.vultur@microchip.com>
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB LAN9668";
+	compatible = "microchip,lan9668-pcb8290", "microchip,lan9668", "microchip,lan966";
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&gpio {
+	miim_a_pins: mdio-pins {
+		/* MDC, MDIO */
+		pins =  "GPIO_28", "GPIO_29";
+		function = "miim_a";
+	};
+
+	pps_out_pins: pps-out-pins {
+		/* 1pps output */
+		pins = "GPIO_38";
+		function = "ptpsync_3";
+	};
+
+	ptp_ext_pins: ptp-ext-pins {
+		/* 1pps input */
+		pins = "GPIO_35";
+		function = "ptpsync_0";
+	};
+
+	udc_pins: ucd-pins {
+		/* VBUS_DET B */
+		pins = "GPIO_8";
+		function = "usb_slave_b";
+	};
+};
+
+&mdio0 {
+	pinctrl-0 = <&miim_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ext_phy0: ethernet-phy@7 {
+		reg = <7>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy1: ethernet-phy@8 {
+		reg = <8>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy2: ethernet-phy@9 {
+		reg = <9>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy3: ethernet-phy@10 {
+		reg = <10>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy4: ethernet-phy@15 {
+		reg = <15>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy5: ethernet-phy@16 {
+		reg = <16>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy6: ethernet-phy@17 {
+		reg = <17>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+
+	ext_phy7: ethernet-phy@18 {
+		reg = <18>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
+		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
+	};
+};
+
+&port0 {
+	reg = <2>;
+	phy-handle = <&ext_phy2>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 0 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port1 {
+	reg = <3>;
+	phy-handle = <&ext_phy3>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 1 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port2 {
+	reg = <0>;
+	phy-handle = <&ext_phy0>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 2 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port3 {
+	reg = <1>;
+	phy-handle = <&ext_phy1>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 3 SERDES6G(1)>;
+	status = "okay";
+};
+
+&port4 {
+	reg = <6>;
+	phy-handle = <&ext_phy6>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 4 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port5 {
+	reg = <7>;
+	phy-handle = <&ext_phy7>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 5 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port6 {
+	reg = <4>;
+	phy-handle = <&ext_phy4>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 6 SERDES6G(2)>;
+	status = "okay";
+};
+
+&port7 {
+	reg = <5>;
+	phy-handle = <&ext_phy5>;
+	phy-mode = "qsgmii";
+	phys = <&serdes 7 SERDES6G(2)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&switch {
+	pinctrl-0 = <&pps_out_pins>, <&ptp_ext_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&udc {
+	pinctrl-0 = <&udc_pins>;
+	pinctrl-names = "default";
+	atmel,vbus-gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
new file mode 100644
index 000000000000..3a3d76af8612
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8291.dts - Device Tree file for PCB8291
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB - LAN9662";
+	compatible = "microchip,lan9662-pcb8291", "microchip,lan9662", "microchip,lan966";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &usart3;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-s0-blue {
+			label = "s0:blue";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s0-green {
+			label = "s0:green";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-blue {
+			label = "s1:blue";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-green {
+			label = "s1:green";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&gpio {
+	fc3_b_pins: fc3-b-pins {
+		/* RX, TX */
+		pins = "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	can0_b_pins:  can0-b-pins {
+		/* RX, TX */
+		pins = "GPIO_35", "GPIO_36";
+		function = "can0_b";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_b_pins>;
+	pinctrl-names = "default";
+	status = "disabled"; /* Conflict with switch */
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart3: serial@200 {
+		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	phys = <&serdes 0 CU(0)>;
+	status = "okay";
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	phys = <&serdes 1 CU(1)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&switch {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x-pcb8309.dts b/arch/arm/boot/dts/lan966x-pcb8309.dts
new file mode 100644
index 000000000000..c436cd20d4b4
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-pcb8309.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8309.dts - Device Tree file for PCB8309
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+	model = "Microchip EVB - LAN9662";
+	compatible = "microchip,lan9662-pcb8309", "microchip,lan9662", "microchip,lan966";
+
+	aliases {
+		serial0 = &usart3;
+		i2c102 = &i2c102;
+		i2c103 = &i2c103;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-controls = <&mux>;
+		i2c-parent = <&i2c4>;
+
+		i2c102: i2c-sfp@1 {
+			reg = <1>;
+		};
+
+		i2c103: i2c-sfp@2 {
+			reg = <2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-s0-green {
+			label = "s0:green";
+			gpios = <&sgpio_out 2 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s0-red {
+			label = "s0:red";
+			gpios = <&sgpio_out 2 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-green {
+			label = "s1:green";
+			gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-s1-red {
+			label = "s1:red";
+			gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&sgpio_out 11 0 GPIO_ACTIVE_HIGH>, /* p11b0 */
+			    <&sgpio_out 11 1 GPIO_ACTIVE_HIGH>; /* p11b1 */
+	};
+
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c102>;
+		tx-disable-gpios = <&sgpio_out 10 0 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in  2 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in  2 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in  1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	sfp3: sfp3 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c103>;
+		tx-disable-gpios = <&sgpio_out 10 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in  3 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in  3 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in  1 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&aes {
+	status = "disabled"; /* Reserved by secure OS */
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart3: serial@200 {
+		pinctrl-0 = <&fc3_b_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c4: i2c@600 {
+		compatible = "microchip,sam9x60-i2c";
+		reg = <0x600 0x200>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&nic_clk>;
+		pinctrl-0 = <&fc4_b_pins>;
+		pinctrl-names = "default";
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		i2c-sda-hold-time-ns = <1500>;
+		status = "okay";
+	};
+};
+
+&gpio {
+	fc3_b_pins: fc3-b-pins {
+		/* RXD, TXD */
+		pins = "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	fc4_b_pins: fc4-b-pins {
+		/* SCL, SDA */
+		pins = "GPIO_57", "GPIO_58";
+		function = "fc4_b";
+	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
+};
+
+&mdio1 {
+	status = "okay";
+};
+
+&phy0 {
+	status = "okay";
+};
+
+&phy1 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	phys = <&serdes 0 CU(0)>;
+	status = "okay";
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+	phys = <&serdes 1 CU(1)>;
+	status = "okay";
+};
+
+&port2 {
+	sfp = <&sfp2>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phys = <&serdes 2 SERDES6G(0)>;
+	status = "okay";
+};
+
+&port3 {
+	sfp = <&sfp3>;
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	phys = <&serdes 3 SERDES6G(1)>;
+	status = "okay";
+};
+
+&serdes {
+	status = "okay";
+};
+
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&switch {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
new file mode 100644
index 000000000000..05b73f7cf0c7
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x.dtsi - Device Tree Include file for Microchip LAN966 family SoC
+ *
+ * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
+ *
+ * Author: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/microchip,lan966x.h>
+
+/ {
+	model = "Microchip LAN966 family SoC";
+	compatible = "microchip,lan966";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			clock-frequency = <600000000>;
+			reg = <0x0>;
+		};
+	};
+
+	clocks {
+		sys_clk: sys_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <165625000>;
+		};
+
+		cpu_clk: cpu_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <600000000>;
+		};
+
+		ddr_clk: ddr_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <300000000>;
+		};
+
+		nic_clk: nic_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	clks: clock-controller@e00c00a8 {
+		compatible = "microchip,lan966x-gck";
+		#clock-cells = <1>;
+		clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
+		clock-names = "cpu", "ddr", "sys";
+		reg = <0xe00c00a8 0x38>, <0xe00c02cc 0x4>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <37500000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		udc: usb@200000 {
+			compatible = "microchip,lan9662-udc",
+				     "atmel,sama5d3-udc";
+			reg = <0x00200000 0x80000>,
+			      <0xe0808000 0x400>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		switch: switch@e0000000 {
+			compatible = "microchip,lan966x-switch";
+			reg = <0xe0000000 0x0100000>,
+			      <0xe2000000 0x0800000>;
+			reg-names = "cpu", "gcb";
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "xtr", "fdma", "ana", "ptp",
+					  "ptp-ext";
+			resets = <&reset 0>;
+			reset-names = "switch";
+			status = "disabled";
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port0: port@0 {
+					reg = <0>;
+					status = "disabled";
+				};
+
+				port1: port@1 {
+					reg = <1>;
+					status = "disabled";
+				};
+
+				port2: port@2 {
+					reg = <2>;
+					status = "disabled";
+				};
+
+				port3: port@3 {
+					reg = <3>;
+					status = "disabled";
+				};
+
+				port4: port@4 {
+					reg = <4>;
+					status = "disabled";
+				};
+
+				port5: port@5 {
+					reg = <5>;
+					status = "disabled";
+				};
+
+				port6: port@6 {
+					reg = <6>;
+					status = "disabled";
+				};
+
+				port7: port@7 {
+					reg = <7>;
+					status = "disabled";
+				};
+			};
+		};
+
+		otp: otp@e0021000 {
+			compatible = "microchip,lan9668-otpc", "microchip,lan9662-otpc";
+			reg = <0xe0021000 0x300>;
+		};
+
+		flx0: flexcom@e0040000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0040000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0040000 0x800>;
+			status = "disabled";
+
+			usart0: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi0: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e0044000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0044000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0044000 0x800>;
+			status = "disabled";
+
+			usart1: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi1: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(4)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		trng: rng@e0048000 {
+			compatible = "atmel,at91sam9g45-trng";
+			reg = <0xe0048000 0x100>;
+			clocks = <&nic_clk>;
+		};
+
+		aes: crypto@e004c000 {
+			compatible = "atmel,at91sam9g46-aes";
+			reg = <0xe004c000 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(13)>;
+			dma-names = "tx", "rx";
+			clocks = <&nic_clk>;
+			clock-names = "aes_clk";
+		};
+
+		flx2: flexcom@e0060000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0060000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0060000 0x800>;
+			status = "disabled";
+
+			usart2: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi2: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(6)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e0064000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0064000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0064000 0x800>;
+			status = "disabled";
+
+			usart3: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi3: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(8)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		dma0: dma-controller@e0068000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe0068000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&nic_clk>;
+			clock-names = "dma_clk";
+		};
+
+		sha: crypto@e006c000 {
+			compatible = "atmel,at91sam9g46-sha";
+			reg = <0xe006c000 0xec>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>;
+			dma-names = "tx";
+			clocks = <&nic_clk>;
+			clock-names = "sha_clk";
+		};
+
+		flx4: flexcom@e0070000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0070000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0070000 0x800>;
+			status = "disabled";
+
+			usart4: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+
+			spi4: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <32>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@600 {
+				compatible = "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(10)>;
+				dma-names = "tx", "rx";
+				clocks = <&nic_clk>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		timer0: timer@e008c000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0xe008c000 0x400>;
+			clocks = <&nic_clk>;
+			clock-names = "timer";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog: watchdog@e0090000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xe0090000 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&nic_clk>;
+			status = "disabled";
+		};
+
+		cpu_ctrl: syscon@e00c0000 {
+			compatible = "microchip,lan966x-cpu-syscon", "syscon";
+			reg = <0xe00c0000 0x350>;
+		};
+
+		can0: can@e081c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&clks GCK_ID_MCAN0>, <&clks GCK_ID_MCAN0>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&clks GCK_ID_MCAN0>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e0820000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0820000 0xfc>, <0x00100000 0x8000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&clks GCK_ID_MCAN1>, <&clks GCK_ID_MCAN1>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&clks GCK_ID_MCAN1>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x4000 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		reset: reset-controller@e200400c {
+			compatible = "microchip,lan966x-switch-reset";
+			reg = <0xe200400c 0x4>;
+			reg-names = "gcb";
+			#reset-cells = <1>;
+			cpu-syscon = <&cpu_ctrl>;
+		};
+
+		gpio: pinctrl@e2004064 {
+			compatible = "microchip,lan966x-pinctrl";
+			reg = <0xe2004064 0xb4>,
+			    <0xe2010024 0x138>;
+			resets = <&reset 0>;
+			reset-names = "switch";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 78>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+		};
+
+		mdio0: mdio@e2004118 {
+			compatible = "microchip,lan966x-miim";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe2004118 0x24>;
+			clocks = <&sys_clk>;
+			status = "disabled";
+		};
+
+		mdio1: mdio@e200413c {
+			compatible = "microchip,lan966x-miim";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe200413c 0x24>,
+			      <0xe2010020 0x4>;
+			clocks = <&sys_clk>;
+			status = "disabled";
+
+			phy0: ethernet-phy@1 {
+				reg = <1>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			phy1: ethernet-phy@2 {
+				reg = <2>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		sgpio: gpio@e2004190 {
+			compatible = "microchip,sparx5-sgpio";
+			reg = <0xe2004190 0x118>;
+			clocks = <&sys_clk>;
+			resets = <&reset 0>;
+			reset-names = "switch";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgpio_in: gpio@0 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <3>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+
+			sgpio_out: gpio@1 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <3>;
+			};
+		};
+
+		hwmon: hwmon@e2010180 {
+			compatible = "microchip,lan9668-hwmon";
+			reg = <0xe2010180 0xc>,
+			      <0xe20042a8 0xc>;
+			reg-names = "pvt", "fan";
+			clocks = <&sys_clk>;
+		};
+
+		serdes: serdes@e202c000 {
+			compatible = "microchip,lan966x-serdes";
+			reg = <0xe202c000 0x9c>,
+			      <0xe2004010 0x4>;
+			#phy-cells = <2>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,gic-400", "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			reg = <0xe8c11000 0x1000>,
+			      <0xe8c12000 0x2000>,
+			      <0xe8c14000 0x2000>,
+			      <0xe8c16000 0x2000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
index 2a0a98fe67f0..3240c67e0c39 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
@@ -11,3 +11,18 @@
 	model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3430", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
index a604d92221a4..c757f0d7781c 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
@@ -11,3 +11,18 @@
 	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
 };
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index b56524cc7fe2..9ba0ea4eb48a 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -27,6 +27,8 @@
 
 	/* HS USB Host PHY on PORT 1 */
 	hsusb2_phy: hsusb2_phy {
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb2_reset_pin>;
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
 		#phy-cells = <0>;
@@ -144,6 +146,8 @@
 };
 
 &usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_pins>;
 	port2-mode = "ehci-phy";
 };
 
@@ -151,10 +155,7 @@
 	phys = <0 &hsusb2_phy>;
 };
 
-
 &omap3_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_pins>;
 
 	mmc3_pins: pinmux_mm3_pins {
 		pinctrl-single,pins = <
@@ -250,8 +251,7 @@
 };
 
 &omap3_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_reset_pin>;
+
 	hsusb2_reset_pin: pinmux_hsusb1_reset_pin {
 		pinctrl-single,pins = <
 			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
@@ -265,21 +265,6 @@
 	};
 };
 
-&omap3_pmx_core2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hsusb2_2_pins>;
-	hsusb2_2_pins: pinmux_hsusb2_2_pins {
-		pinctrl-single,pins = <
-			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
-			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
-			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
-			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
-			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
-			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
-		>;
-	};
-};
-
 &uart2 {
 	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
index 57bae2aa910e..cb08aa62d967 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
@@ -11,3 +11,11 @@
 	model = "LogicPD Zoom OMAP35xx Torpedo Development Kit";
 	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3430", "ti,omap3";
 };
+
+&omap3_pmx_core {
+	isp1763_pins: pinmux_isp1763_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2154,  PIN_INPUT_PULLUP | MUX_MODE4)	/* sdmmc1_dat6.gpio_128 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index 5532db04046c..07ea822fe405 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -85,3 +85,12 @@
 		>;
 	};
 };
+
+/* The gpio muxing between omap3530 and dm3730 is different for GPIO_128 */
+&omap3_pmx_wkup {
+	isp1763_pins: pinmux_isp1763_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a58, PIN_INPUT_PULLUP | MUX_MODE4)	/* reserved.gpio_128 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index 533a47bc4a53..e0cbac500e17 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -59,7 +59,7 @@
 		};
 	};
 
-	pwm10: dmtimer-pwm {
+	pwm10: pwm-10 {
 		compatible = "ti,omap-dmtimer-pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm_pins>;
@@ -93,7 +93,8 @@
 
 &gpmc {
 	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
-		  1 0 0x2c000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
+		  1 0 0x2c000000 0x1000000	/* CS1: 16MB for LAN9221 */
+		  6 0 0x28000000 0x1000000>;	/* CS6: 16MB for ISP1763 */
 
 	ethernet@gpmc {
 		pinctrl-names = "default";
@@ -102,6 +103,44 @@
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;		/* gpio129 */
 		reg = <1 0 0xff>;
 	};
+
+	usb@6,0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&isp1763_pins>;
+		compatible = "nxp,usb-isp1763";
+		reg = <0x6 0x0 0xff>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host";
+		bus-width = <16>;
+		dr_mode = "host";
+		gpmc,mux-add-data = <0>;
+		gpmc,device-width = <2>;
+		gpmc,wait-pin = <0>;
+		gpmc,burst-length = <4>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <45>;
+		gpmc,cs-wr-off-ns = <45>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <0>;
+		gpmc,adv-wr-off-ns = <0>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <45>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <25>;
+		gpmc,rd-cycle-ns = <60>;
+		gpmc,wr-cycle-ns = <45>;
+		gpmc,access-ns = <35>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <60>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <5>;
+		gpmc,wr-access-ns = <20>;
+	};
 };
 
 &hdqw1w {
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 3a5228562b0d..72b5af475d09 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -20,7 +20,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		user0 {
+		led-user0 {
 			label = "user0";
 			gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* LEDA */
 			linux,default-trigger = "none";
diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 10b8249b8ab6..1bb686a7b3ec 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -121,7 +121,7 @@
 			status = "disabled";
 		};
 
-		usb0: ehci@40006100 {
+		usb0: usb@40006100 {
 			compatible = "nxp,lpc1850-ehci", "generic-ehci";
 			reg = <0x40006100 0x100>;
 			interrupts = <8>;
@@ -133,7 +133,7 @@
 			status = "disabled";
 		};
 
-		usb1: ehci@40007100 {
+		usb1: usb@40007100 {
 			compatible = "nxp,lpc1850-ehci", "generic-ehci";
 			reg = <0x40007100 0x100>;
 			interrupts = <9>;
@@ -183,7 +183,7 @@
 			compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
 			reg = <0x40010000 0x2000>;
 			interrupts = <5>;
-			interrupt-names	= "macirq";
+			interrupt-names = "macirq";
 			clocks = <&ccu1 CLK_CPU_ETHERNET>;
 			clock-names = "stmmaceth";
 			resets = <&rgu 22>;
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index c87066d6c995..974410918f35 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -315,7 +315,7 @@
 			/* System Control Block */
 			scb {
 				compatible = "simple-bus";
-				ranges = <0x0 0x040004000 0x00001000>;
+				ranges = <0x0 0x40004000 0x00001000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 
diff --git a/arch/arm/boot/dts/ls1021a-iot.dts b/arch/arm/boot/dts/ls1021a-iot.dts
new file mode 100644
index 000000000000..ce8e26d7791f
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-iot.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021-2022 NXP
+ *
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A-IOT Board";
+	compatible = "fsl,ls1021a-iot", "fsl,ls1021a";
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_3p3v: regulator-3V3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2V5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&can0{
+	status = "disabled";
+};
+
+&can1{
+	status = "disabled";
+};
+
+&can2{
+	status = "disabled";
+};
+
+&can3{
+	status = "okay";
+};
+
+&dcu {
+	display = <&display>;
+	status = "okay";
+
+	display: display@0 {
+		bits-per-pixel = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+
+			timing0: mode0 {
+				clock-frequency = <25000000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <80>;
+				hfront-porch = <80>;
+				vback-porch = <16>;
+				vfront-porch = <16>;
+				hsync-len = <12>;
+				vsync-len = <2>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&enet0 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&phy1>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet1 {
+	tbi-handle = <&tbi1>;
+	phy-handle = <&phy3>;
+	phy-connection-type = "sgmii";
+	status = "okay";
+};
+
+&enet2 {
+	fixed-link = <0 1 1000 0 0>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&esdhc{
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9555: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sgtl5000: audio-codec@2a {
+		#sound-dai-cells = <0x0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x2a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_2p5v>;
+		clocks = <&sys_mclk>;
+	};
+
+	max1239: adc@35 {
+		compatible = "maxim,max1239";
+		reg = <0x35>;
+		#io-channel-cells = <1>;
+	};
+
+	ina2201: core-monitor@44 {
+		compatible = "ti,ina220";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	ina2202: current-monitor@45 {
+		compatible = "ti,ina220";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	lm75b: thermal-monitor@48 {
+		compatible = "national,lm75b";
+		reg = <0x48>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	phy0: ethernet-phy@0 {
+		reg = <0x0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <0x1>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <0x2>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <0x3>;
+	};
+
+	tbi1: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&qspi {
+	num-cs = <2>;
+	status = "okay";
+
+	s25fl128s: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
index f3ddea934f1b..d2cae8c7d7a6 100644
--- a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
+++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
@@ -30,11 +30,11 @@
 	};
 
 	reg_3p3v: regulator-3p3v {
-		  compatible = "regulator-fixed";
-		  regulator-name = "3P3V";
-		  regulator-min-microvolt = <3300000>;
-		  regulator-max-microvolt = <3300000>;
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 74a67604876c..f1acb97aee69 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -1,49 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
  * Copyright 2018 NXP
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -67,19 +25,12 @@
 		clock-frequency = <24576000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	sound {
@@ -231,9 +182,9 @@
 	#address-cells = <2>;
 	#size-cells = <1>;
 	/* NOR, NAND Flashes and FPGA on board */
-	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
-		  0x2 0x0 0x0 0x7e800000 0x00010000
-		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>,
+		 <0x2 0x0 0x0 0x7e800000 0x00010000>,
+		 <0x3 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
 	nor@0,0 {
@@ -254,7 +205,7 @@
 	fpga: board-control@3,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "simple-bus";
+		compatible = "simple-mfd";
 		reg = <0x3 0x0 0x0000100>;
 		bank-width = <1>;
 		device-width = <1>;
@@ -328,6 +279,20 @@
 	};
 };
 
+&qspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
 &sai2 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
index 9d8f0c2a8aba..1ea32fff4120 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -8,6 +8,7 @@
 
 / {
 	model = "NXP LS1021A-TSN Board";
+	compatible = "fsl,ls1021a-tsn", "fsl,ls1021a";
 
 	sys_mclk: clock-mclk {
 		compatible = "fixed-clock";
@@ -90,6 +91,8 @@
 				/* Internal port connected to eth2 */
 				ethernet = <&enet2>;
 				phy-mode = "rgmii";
+				rx-internal-delay-ps = <0>;
+				tx-internal-delay-ps = <0>;
 				reg = <4>;
 
 				fixed-link {
@@ -136,7 +139,6 @@
 	/* 3 axis accelerometer */
 	accelerometer@1e {
 		compatible = "fsl,fxls8471";
-		position = <0>;
 		reg = <0x1e>;
 	};
 
@@ -251,7 +253,7 @@
 
 	flash@0 {
 		/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
-		compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
+		compatible = "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index 5edf001f6138..f5c03871b205 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -1,49 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
  * Copyright 2018 NXP
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -65,19 +23,12 @@
 		clock-frequency = <24576000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 007dd2bd0595..49c78c84cd5d 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2013-2014 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -51,7 +9,6 @@
 / {
 	#address-cells = <2>;
 	#size-cells = <2>;
-	compatible = "fsl,ls1021a";
 	interrupt-parent = <&gic>;
 
 	aliases {
@@ -90,7 +47,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x0>;
 	};
@@ -165,10 +122,18 @@
 			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		ifc: ifc@1530000 {
-			compatible = "fsl,ifc", "simple-bus";
+		ifc: memory-controller@1530000 {
+			compatible = "fsl,ifc";
 			reg = <0x0 0x1530000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1021a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen 4 3>;
+			clock-names = "sfp";
 		};
 
 		dcfg: dcfg@1ee0000 {
@@ -234,7 +199,7 @@
 					<3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
 					<4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
 					<5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-map-mask = <0xffffffff 0x0>;
+				interrupt-map-mask = <0x7 0x0>;
 			};
 		};
 
@@ -246,6 +211,7 @@
 			reg		 = <0x0 0x1700000 0x0 0x100000>;
 			ranges		 = <0x0 0x0 0x1700000 0x100000>;
 			interrupts	 = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 
 			sec_jr0: jr@10000 {
 				compatible = "fsl,sec-v5.0-job-ring",
@@ -289,78 +255,45 @@
 			reg = <0x0 0x1f00000 0x0 0x10000>;
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>;
-			fsl,tmu-calibration = <0x00000000 0x00000020
-					       0x00000001 0x00000024
-					       0x00000002 0x0000002a
-					       0x00000003 0x00000032
-					       0x00000004 0x00000038
-					       0x00000005 0x0000003e
-					       0x00000006 0x00000043
-					       0x00000007 0x0000004a
-					       0x00000008 0x00000050
-					       0x00000009 0x00000059
-					       0x0000000a 0x0000005f
-					       0x0000000b 0x00000066
-
-					       0x00010000 0x00000023
-					       0x00010001 0x0000002b
-					       0x00010002 0x00000033
-					       0x00010003 0x0000003a
-					       0x00010004 0x00000042
-					       0x00010005 0x0000004a
-					       0x00010006 0x00000054
-					       0x00010007 0x0000005c
-					       0x00010008 0x00000065
-					       0x00010009 0x0000006f
-
-					       0x00020000 0x00000029
-					       0x00020001 0x00000033
-					       0x00020002 0x0000003d
-					       0x00020003 0x00000048
-					       0x00020004 0x00000054
-					       0x00020005 0x00000060
-					       0x00020006 0x0000006c
-
-					       0x00030000 0x00000025
-					       0x00030001 0x00000033
-					       0x00030002 0x00000043
-					       0x00030003 0x00000055>;
+			fsl,tmu-calibration = <0x00000000 0x00000020>,
+					      <0x00000001 0x00000024>,
+					      <0x00000002 0x0000002a>,
+					      <0x00000003 0x00000032>,
+					      <0x00000004 0x00000038>,
+					      <0x00000005 0x0000003e>,
+					      <0x00000006 0x00000043>,
+					      <0x00000007 0x0000004a>,
+					      <0x00000008 0x00000050>,
+					      <0x00000009 0x00000059>,
+					      <0x0000000a 0x0000005f>,
+					      <0x0000000b 0x00000066>,
+
+					      <0x00010000 0x00000023>,
+					      <0x00010001 0x0000002b>,
+					      <0x00010002 0x00000033>,
+					      <0x00010003 0x0000003a>,
+					      <0x00010004 0x00000042>,
+					      <0x00010005 0x0000004a>,
+					      <0x00010006 0x00000054>,
+					      <0x00010007 0x0000005c>,
+					      <0x00010008 0x00000065>,
+					      <0x00010009 0x0000006f>,
+
+					      <0x00020000 0x00000029>,
+					      <0x00020001 0x00000033>,
+					      <0x00020002 0x0000003d>,
+					      <0x00020003 0x00000048>,
+					      <0x00020004 0x00000054>,
+					      <0x00020005 0x00000060>,
+					      <0x00020006 0x0000006c>,
+
+					      <0x00030000 0x00000025>,
+					      <0x00030001 0x00000033>,
+					      <0x00030002 0x00000043>,
+					      <0x00030003 0x00000055>;
 			#thermal-sensor-cells = <1>;
 		};
 
-		thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <1000>;
-				polling-delay = <5000>;
-
-				thermal-sensors = <&tmu 0>;
-
-				trips {
-					cpu_alert: cpu-alert {
-						temperature = <85000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-					cpu_crit: cpu-crit {
-						temperature = <95000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&cpu_alert>;
-						cooling-device =
-							<&cpu0 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		dspi0: spi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
@@ -393,10 +326,9 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 39>, <&edma0 1 38>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 38>, <&edma0 1 39>;
 			status = "disabled";
 		};
 
@@ -406,10 +338,9 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 37>, <&edma0 1 36>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 36>, <&edma0 1 37>;
 			status = "disabled";
 		};
 
@@ -419,10 +350,9 @@
 			#size-cells = <0>;
 			reg = <0x0 0x21a0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 35>, <&edma0 1 34>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 34>, <&edma0 1 35>;
 			status = "disabled";
 		};
 
@@ -717,7 +647,7 @@
 			status = "disabled";
 		};
 
-		edma0: edma@2c00000 {
+		edma0: dma-controller@2c00000 {
 			#dma-cells = <2>;
 			compatible = "fsl,vf610-edma";
 			reg = <0x0 0x2c00000 0x0 0x10000>,
@@ -871,7 +801,7 @@
 			phy_type = "ulpi";
 		};
 
-		usb3: usb3@3100000 {
+		usb3: usb@3100000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -883,8 +813,8 @@
 
 		pcie@3400000 {
 			compatible = "fsl,ls1021a-pcie";
-			reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
-			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */
+			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
 			fsl,pcie-scfg = <&scfg 0>;
@@ -893,8 +823,8 @@
 			device_type = "pci";
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
-				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&msi1>, <&msi2>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
@@ -907,8 +837,8 @@
 
 		pcie@3500000 {
 			compatible = "fsl,ls1021a-pcie";
-			reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
-			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */
+			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "regs", "config";
 			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
 			fsl,pcie-scfg = <&scfg 1>;
@@ -917,8 +847,8 @@
 			device_type = "pci";
 			num-viewport = <6>;
 			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
-				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 			msi-parent = <&msi1>, <&msi2>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
@@ -936,6 +866,7 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "ipg", "per";
 			big-endian;
+			status = "disabled";
 		};
 
 		can1: can@2a80000 {
@@ -945,6 +876,7 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "ipg", "per";
 			big-endian;
+			status = "disabled";
 		};
 
 		can2: can@2a90000 {
@@ -954,6 +886,7 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "ipg", "per";
 			big-endian;
+			status = "disabled";
 		};
 
 		can3: can@2aa0000 {
@@ -963,6 +896,7 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "ipg", "per";
 			big-endian;
+			status = "disabled";
 		};
 
 		ocram1: sram@10000000 {
@@ -991,6 +925,7 @@
 				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "qdma-error",
 				"qdma-queue0", "qdma-queue1";
+			#dma-cells = <2>;
 			dma-channels = <8>;
 			block-number = <1>;
 			block-offset = <0x1000>;
@@ -1004,6 +939,7 @@
 			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1ee2140 0x0 0x8>;
 			#fsl,rcpm-wakeup-cells = <2>;
+			#power-domain-cells = <0>;
 		};
 
 		ftm_alarm0: timer0@29d0000 {
@@ -1015,4 +951,37 @@
 			big-endian;
 		};
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/mba6ulx.dtsi b/arch/arm/boot/dts/mba6ulx.dtsi
new file mode 100644
index 000000000000..5bf831b072d6
--- /dev/null
+++ b/arch/arm/boot/dts/mba6ulx.dtsi
@@ -0,0 +1,569 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/ {
+	model = "TQ-Systems MBA6ULx Baseboard";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc1;
+		rtc0 = &rtc0;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&reg_mba6ul_3v3>;
+		enable-gpios = <&expander_out0 4 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	beeper: beeper {
+		compatible = "gpio-beeper";
+		gpios = <&expander_out1 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_buttons: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_buttons>;
+
+		button1 {
+			label = "s14";
+			linux,code = <KEY_1>;
+			gpios = <&expander_in0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button2 {
+			label = "s6";
+			linux,code = <KEY_2>;
+			gpios = <&expander_in0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		button3 {
+			label = "s7";
+			linux,code = <KEY_3>;
+			gpios = <&expander_in0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			label = "POWER";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led1 {
+			label = "led1";
+			gpios = <&expander_out1 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&expander_out1 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_lcd_pwr: regulator-lcd-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-pwr";
+		gpio = <&expander_out0 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_mba6ul_3v3: regulator-mba6ul-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-mba6ul-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_mba6ul_5v0: regulator-mba6ul-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-mba6ul-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_mpcie: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "mpcie-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander_out0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		startup-delay-us = <500000>;
+		vin-supply = <&reg_mba6ul_3v3>;
+	};
+
+	reg_otg2vbus_5v0: regulator-otg2-vbus-5v0 {
+		compatible = "regulator-fixed";
+		gpio = <&expander_out1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "otg2-vbus-supply-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_mpcie>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x6000000>;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "imx-audio-tlv320aic32x4";
+		ssi-controller = <&sai1>;
+		audio-codec = <&tlv320aic32x4>;
+		audio-asrc = <&asrc>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_mba6ul_3v3>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_mba6ul_3v3>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <768000000>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	num-cs = <1>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_mba6ul_3v3>;
+	phy-reset-gpios = <&expander_out1 1 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-reset-post-delay = <1>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_mdc>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_mba6ul_3v3>;
+	phy-reset-gpios = <&expander_out1 2 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-reset-post-delay = <1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			reg = <0>;
+			max-speed = <100>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
+			reg = <1>;
+			max-speed = <100>;
+		};
+	};
+};
+
+&i2c4 {
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&clks IMX6UL_CLK_SAI1>;
+		clock-names = "mclk";
+		ldoin-supply = <&reg_mba6ul_3v3>;
+		iov-supply = <&reg_mba6ul_3v3>;
+	};
+
+	jc42: temperature-sensor@19 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x19>;
+	};
+
+	expander_out0: gpio-expander@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	expander_in0: gpio-expander@21 {
+		compatible = "nxp,pca9554";
+		reg = <0x21>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander_in0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		enet1_int-hog {
+			gpio-hog;
+			gpios = <6 0>;
+			input;
+		};
+
+		enet2_int-hog {
+			gpio-hog;
+			gpios = <7 0>;
+			input;
+		};
+	};
+
+	expander_out1: gpio-expander@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	analog_touch: touchscreen@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpio4>;
+		interrupt-controller;
+		status = "disabled";
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,adc-freq = <1>;      /* 3.25 MHz ADC clock speed */
+			st,ave-ctrl = <3>;      /* 8 sample average control */
+			st,fraction-z = <7>;    /* 7 length fractional part in z */
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			st,mod-12b = <1>;       /* 12-bit ADC */
+			st,ref-sel = <0>;       /* internal ADC reference */
+			st,sample-time = <4>;   /* ADC converstion time: 80 clocks */
+			st,settling = <3>;      /* 1 ms panel driver settling time */
+			st,touch-det-delay = <5>; /* 5 ms touch detect interrupt delay */
+		};
+	};
+
+	/* NXP SE97BTP with temperature sensor + eeprom */
+	se97b: eeprom@51 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>,
+			  <&clks IMX6UL_CLK_SAI1>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24000000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	/* for DTE mode, add below change */
+	/* fsl,dte-mode; */
+	/* pinctrl-0 = <&pinctrl_uart6dte>; */
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* otg-port */
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	power-active-high;
+	over-current-active-low;
+	/* we implement only dual role but not a fully featured OTG */
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+/* 7-port usb hub */
+/* id, pwr, oc pins not connected */
+&usbotg2 {
+	disable-over-current;
+	vbus-supply = <&reg_otg2vbus_5v0>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_mba6ul_3v3>;
+	vqmmc-supply = <&reg_vccsd>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_buttons: buttonsgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0x100b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK	0x1b020
+			MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO	0x1b020
+			MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI	0x1b020
+			MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0	0x1b020
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b0a8
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0a0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0a0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b0a8
+		>;
+	};
+
+	pinctrl_enet2_mdc: enet2mdcgrp {
+		fsl,pins = <
+			/* mdio */
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+		>;
+	};
+
+	pinctrl_expander_in0: expanderin0grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x1b0b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6UL_PAD_GPIO1_IO09__PWM2_OUT		0x00003050
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK	0x1b0b1
+			MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC	0x1b0b1
+			MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA	0x1f0b8
+			MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA	0x110b0
+			MX6UL_PAD_CSI_DATA01__SAI1_MCLK		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__UART6_DCE_TX	0x1b0b1
+			MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX	0x1b0b1
+			MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS	0x1b0b1
+			MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart6dte: uart6dte {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX	0x1b0b1
+			MX6UL_PAD_CSI_MCLK__UART6_DTE_RX	0x1b0b1
+			MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS	0x1b0b1
+			MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x00017059
+			MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC	0x0001b0b0
+			MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR	0x0001b099
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x00017059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x00017059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x00017059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x00017059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x00017059
+			/* WP */
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0001b099
+			/* CD */
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0001b099
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x000170b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x000170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x000170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x000170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x000170b9
+			/* WP */
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0001b099
+			/* CD */
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0001b099
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x00017069
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x000170f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x000170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x000170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x000170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x000170f9
+			/* WP */
+			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0001b099
+			/* CD */
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0001b099
+		>;
+	};
+
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B	0x0001b099
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 8bae6ed0abb2..8e3860d5d916 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	#address-cells = <1>;
@@ -36,6 +37,17 @@
 				reg = <0x4000 0x400>;
 			};
 
+			aiu: audio-controller@5400 {
+				compatible = "amlogic,aiu";
+				#sound-dai-cells = <2>;
+				sound-name-prefix = "AIU";
+				reg = <0x5400 0x2ac>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "i2s", "spdif";
+				status = "disabled";
+			};
+
 			assist: assist@7c00 {
 				compatible = "amlogic,meson-mx-assist", "syscon";
 				reg = <0x7c00 0x200>;
@@ -47,14 +59,15 @@
 			};
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				fifo-size = <128>;
 				status = "disabled";
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -92,7 +105,7 @@
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -201,21 +214,21 @@
 			ranges = <0x0 0xc8100000 0x100000>;
 
 			ao_arc_rproc: remoteproc@1c {
-				compatible= "amlogic,meson-mx-ao-arc";
+				compatible = "amlogic,meson-mx-ao-arc";
 				reg = <0x1c 0x8>, <0x38 0x8>;
 				reg-names = "remap", "cpu";
 				status = "disabled";
 			};
 
 			ir_receiver: ir-receiver@480 {
-				compatible= "amlogic,meson6-ir";
+				compatible = "amlogic,meson6-ir";
 				reg = <0x480 0x20>;
 				interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
index 61ec929ab86e..c6d1c5a8a3bf 100644
--- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts
+++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
@@ -27,7 +27,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-blue {
 			label = "x8:blue:power";
 			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>;
 		};
@@ -65,7 +65,7 @@
 	pinctrl-0 = <&spi_nor_pins>;
 	pinctrl-names = "default";
 
-	spi-flash@0 {
+	flash@0 {
 		compatible = "mxicy,mx25l1606e";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 157a950a55d3..4f22ab451aae 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -133,7 +133,7 @@
 		};
 	};
 
-	gpu_opp_table: gpu-opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-182142857 {
@@ -304,14 +304,42 @@
 					  "pp2", "ppmmu2", "pp4", "ppmmu4",
 					  "pp5", "ppmmu5", "pp6", "ppmmu6";
 			resets = <&reset RESET_MALI>;
+
 			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
 			clock-names = "bus", "core";
+
+			assigned-clocks = <&clkc CLKID_MALI>;
+			assigned-clock-rates = <318750000>;
+
 			operating-points-v2 = <&gpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 }; /* end of / */
 
+&aiu {
+	compatible = "amlogic,aiu-meson8", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
 &aobus {
 	pmu: pmu@e0 {
 		compatible = "amlogic,meson8-pmu", "syscon";
@@ -335,6 +363,38 @@
 			gpio-ranges = <&pinctrl_aobus 0 0 16>;
 		};
 
+		i2s_am_clk_pins: i2s-am-clk-out {
+			mux {
+				groups = "i2s_am_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s-ao-clk-out {
+			mux {
+				groups = "i2s_ao_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s-lr-clk-out {
+			mux {
+				groups = "i2s_lr_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_ao_pins: i2s-out-ch01 {
+			mux {
+				groups = "i2s_out_ch01_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
 		uart_ao_a_pins: uart_ao_a {
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
@@ -370,7 +430,7 @@
 };
 
 &ao_arc_rproc {
-	compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+	compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
 	amlogic,secbus2 = <&secbus2>;
 	sram = <&ao_arc_sram>;
 	resets = <&reset RESET_MEDIA_CPU>;
@@ -446,6 +506,15 @@
 			};
 		};
 
+		sdxc_a_pins: sdxc-a {
+			mux {
+				groups = "sdxc_d0_a", "sdxc_d13_a",
+					 "sdxc_clk_a", "sdxc_cmd_a";
+				function = "sdxc_a";
+				bias-pull-up;
+			};
+		};
+
 		sdxc_b_pins: sdxc-b {
 			mux {
 				groups = "sdxc_d0_b", "sdxc_d13_b",
@@ -455,6 +524,14 @@
 			};
 		};
 
+		spdif_out_pins: spdif-out {
+			mux {
+				groups = "spdif_out";
+				function = "spdif";
+				bias-disable;
+			};
+		};
+
 		spi_nor_pins: nor {
 			mux {
 				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
@@ -500,6 +577,14 @@
 				bias-disable;
 			};
 		};
+
+		xtal_32k_out_pins: xtal-32k-out {
+			mux {
+				groups = "xtal_32k_out";
+				function = "xtal";
+				bias-disable;
+			};
+		};
 	};
 };
 
@@ -583,6 +668,9 @@
 	arm,filter-ranges = <0x100000 0xc0000000>;
 	prefetch-data = <1>;
 	prefetch-instr = <1>;
+	arm,prefetch-offset = <7>;
+	arm,double-linefill = <1>;
+	arm,prefetch-drop = <1>;
 	arm,shared-override;
 };
 
@@ -668,27 +756,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
index 8e48ccc6b634..3da47349eaaf 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -73,7 +73,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "ec100:red:power";
 			/*
 			 * Needs to go LOW (together with the poweroff GPIO)
@@ -96,6 +96,32 @@
 		#clock-cells = <0>;
 	};
 
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "M8B-EC100";
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-rates = <270950400>,
+				       <294912000>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&rt5640>;
+			};
+		};
+	};
+
 	usb_vbus: regulator-usb-vbus {
 		/*
 		 * Silergy SY6288CCAC-GP 2A Power Distribution Switch.
@@ -148,7 +174,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 0 1148 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -232,7 +258,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 1 1148 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -242,6 +268,14 @@
 	};
 };
 
+&aiu {
+	status = "okay";
+
+	pinctrl-0 = <&i2s_am_clk_pins>, <&i2s_out_ao_clk_pins>,
+		    <&i2s_out_lr_clk_pins>, <&i2s_out_ch01_ao_pins>;
+	pinctrl-names = "default";
+};
+
 &cpu0 {
 	cpu-supply = <&vcck>;
 };
@@ -283,9 +317,19 @@
 
 	rt5640: codec@1c {
 		compatible = "realtek,rt5640";
+
 		reg = <0x1c>;
+
+		#sound-dai-cells = <0>;
+
 		interrupt-parent = <&gpio_intc>;
 		interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */
+
+		/*
+		 * TODO: realtek,ldo1-en-gpios is connected to GPIO_BSD_EN.
+		 * We currently cannot configure this pin correctly.
+		 * Luckily for us it's in the "right" state by default.
+		 */
 		realtek,in1-differential;
 	};
 };
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
index f3937d55472d..7adedd3258c3 100644
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -34,6 +34,8 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
+		pwm-supply = <&vcc_5v>;
+
 		pwms = <&pwm_cd 0 1148 0>;
 		pwm-dutycycle-range = <100 0>;
 
@@ -79,7 +81,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 1 1148 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index c440ef94e082..941682844faf 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -34,7 +34,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		blue {
+		led-blue {
 			label = "c1:blue:alive";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
@@ -131,7 +131,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&p5v0>;
+		pwm-supply = <&p5v0>;
 
 		pwms = <&pwm_cd 0 12218 0>;
 		pwm-dutycycle-range = <91 0>;
@@ -163,7 +163,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&p5v0>;
+		pwm-supply = <&p5v0>;
 
 		pwms = <&pwm_cd 1 12218 0>;
 		pwm-dutycycle-range = <91 0>;
@@ -281,19 +281,6 @@
 			  "J7 Header Pin 6", "J7 Header Pin 5",
 			  "J7 Header Pin 7", "HDMI_CEC",
 			  "SYS_LED", "", "";
-
-	/*
-	 * WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller.
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	usb-hub {
-		gpio-hog;
-		gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
 };
 
 &ir_receiver {
@@ -381,5 +368,16 @@
 };
 
 &usb1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	hub@1 {
+		/* Genesys Logic GL852G usb hub */
+		compatible = "usb5e3,610";
+		reg = <1>;
+		vdd-supply = <&p5v0>;
+		reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+	};
 };
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index c02b03cbcdf4..5979209fe91e 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -125,7 +125,7 @@
 		};
 	};
 
-	gpu_opp_table: gpu-opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-255000000 {
@@ -279,6 +279,29 @@
 	};
 }; /* end of / */
 
+&aiu {
+	compatible = "amlogic,aiu-meson8b", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
 &aobus {
 	pmu: pmu@e0 {
 		compatible = "amlogic,meson8b-pmu", "syscon";
@@ -302,6 +325,46 @@
 			gpio-ranges = <&pinctrl_aobus 0 0 16>;
 		};
 
+		i2s_am_clk_pins: i2s-am-clk-out {
+			mux {
+				groups = "i2s_am_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s-ao-clk-out {
+			mux {
+				groups = "i2s_ao_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s-lr-clk-out {
+			mux {
+				groups = "i2s_lr_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_ao_pins: i2s-out-ch01 {
+			mux {
+				groups = "i2s_out_01";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		spdif_out_1_pins: spdif-out-1 {
+			mux {
+				groups = "spdif_out_1";
+				function = "spdif_1";
+				bias-disable;
+			};
+		};
+
 		uart_ao_a_pins: uart_ao_a {
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
@@ -321,7 +384,7 @@
 };
 
 &ao_arc_rproc {
-	compatible= "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
+	compatible = "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
 	amlogic,secbus2 = <&secbus2>;
 	sram = <&ao_arc_sram>;
 	resets = <&reset RESET_MEDIA_CPU>;
@@ -517,8 +580,8 @@
 };
 
 &gpio_intc {
-	compatible = "amlogic,meson-gpio-intc",
-		     "amlogic,meson8b-gpio-intc";
+	compatible = "amlogic,meson8b-gpio-intc",
+		     "amlogic,meson-gpio-intc";
 	status = "okay";
 };
 
@@ -580,6 +643,9 @@
 	arm,filter-ranges = <0x100000 0xc0000000>;
 	prefetch-data = <1>;
 	prefetch-instr = <1>;
+	arm,prefetch-offset = <7>;
+	arm,double-linefill = <1>;
+	arm,prefetch-drop = <1>;
 	arm,shared-override;
 };
 
@@ -661,27 +727,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
index fa6d55f1cfb9..aa4d4bf70629 100644
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -19,7 +19,6 @@
 		ethernet0 = &ethmac;
 		i2c0 = &i2c_AO;
 		serial0 = &uart_AO;
-		serial1 = &uart_A;
 		mmc0 = &sd_card_slot;
 	};
 
@@ -45,12 +44,32 @@
 		};
 	};
 
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		pinctrl-0 = <&xtal_32k_out_pins>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>,
+			      <&gpio_ao GPIOAO_6 GPIO_ACTIVE_LOW>;
+
+		clocks = <&xtal_32k_out>;
+		clock-names = "ext_clock";
+	};
+
 	vcc_3v3: regulator-vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	xtal_32k_out: xtal-32k-out-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32k_out";
+	};
 };
 
 &cpu0 {
@@ -192,6 +211,27 @@
 	vref-supply = <&vddio_ao1v8>;
 };
 
+/* SDIO wifi */
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_a_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	disable-wp;
+	non-removable;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
 &sdio {
 	status = "okay";
 
@@ -222,6 +262,12 @@
 	pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>;
 	pinctrl-names = "default";
 	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+	};
 };
 
 &uart_AO {
diff --git a/arch/arm/boot/dts/milbeaut-m10v.dtsi b/arch/arm/boot/dts/milbeaut-m10v.dtsi
index aa7c6caeb750..75f0c0af2270 100644
--- a/arch/arm/boot/dts/milbeaut-m10v.dtsi
+++ b/arch/arm/boot/dts/milbeaut-m10v.dtsi
@@ -65,10 +65,18 @@
 			      <0x1d002000 0x1000>; /* CPU I/f base and size */
 		};
 
+		clk: clock-ctrl@1d021000 {
+			compatible = "socionext,milbeaut-m10v-ccu";
+			#clock-cells = <1>;
+			reg = <0x1d021000 0x1000>;
+			clocks = <&uclk40xi>;
+		};
+
 		timer@1e000050 { /* 32-bit Reload Timers */
 			compatible = "socionext,milbeaut-timer";
 			reg = <0x1e000050 0x20>;
 			interrupts = <0 91 4>;
+			clocks = <&clk 4>;
 		};
 
 		uart1: serial@1e700010 { /* PE4, PE5 */
@@ -77,6 +85,7 @@
 			reg = <0x1e700010 0x10>;
 			interrupts = <0 141 0x4>, <0 149 0x4>;
 			interrupt-names = "rx", "tx";
+			clocks = <&clk 2>;
 		};
 
 	};
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 46984d4c5224..987d792f67ea 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -275,7 +275,9 @@
 				compatible = "marvell,pdma-1.0";
 				reg = <0xd4000000 0x10000>;
 				interrupts = <48>;
+				/* For backwards compatibility: */
 				#dma-channels = <16>;
+				dma-channels = <16>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
index 08a7d3ce383f..ea02fd403a9b 100644
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -27,16 +27,14 @@
 
 		cpcap_battery: battery {
 			compatible = "motorola,cpcap-battery";
-			interrupts-extended = <
-				&cpcap 6 0 &cpcap 5 0 &cpcap 3 0
-				&cpcap 20 0 &cpcap 54 0 &cpcap 57 0
-			>;
+			interrupts-extended =
+				<&cpcap 6 0>, <&cpcap 5 0>, <&cpcap 3 0>,
+				<&cpcap 20 0>, <&cpcap 54 0>, <&cpcap 57 0>;
 			interrupt-names =
 				"eol", "lowbph", "lowbpl",
-				"chrgcurr1", "battdetb",
-				"cccal";
-			io-channels = <&cpcap_adc 0 &cpcap_adc 1
-				       &cpcap_adc 5 &cpcap_adc 6>;
+				"chrgcurr1", "battdetb", "cccal";
+			io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+				      <&cpcap_adc 5>, <&cpcap_adc 6>;
 			io-channel-names = "battdetb", "battp",
 					   "chg_isense", "batti";
 			power-supplies = <&cpcap_charger>;
@@ -44,20 +42,19 @@
 
 		cpcap_charger: charger {
 			compatible = "motorola,mapphone-cpcap-charger";
-			interrupts-extended = <
-				&cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
-				&cpcap 22 0 &cpcap 21 0 &cpcap 20 0 &cpcap 19 0
-				&cpcap 54 0
-			>;
+			interrupts-extended =
+				<&cpcap 13 0>, <&cpcap 12 0>, <&cpcap 29 0>,
+				<&cpcap 28 0>, <&cpcap 22 0>, <&cpcap 21 0>,
+				<&cpcap 20 0>, <&cpcap 19 0>, <&cpcap 54 0>;
 			interrupt-names =
-				"chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
-				"rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
-				"battdetb";
-			mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
-				      &gpio3 23 GPIO_ACTIVE_LOW>;
-			io-channels = <&cpcap_adc 0 &cpcap_adc 1
-				       &cpcap_adc 2 &cpcap_adc 5
-				       &cpcap_adc 6>;
+				"chrg_det", "rvrs_chrg", "chrg_se1b",
+				"se0conn", "rvrs_mode", "chrgcurr2",
+				"chrgcurr1", "vbusvld", "battdetb";
+			mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>,
+				     <&gpio3 23 GPIO_ACTIVE_LOW>;
+			io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+				      <&cpcap_adc 2>, <&cpcap_adc 5>,
+				      <&cpcap_adc 6>;
 			io-channel-names = "battdetb", "battp",
 					   "vbus", "chg_isense",
 					   "batti";
@@ -98,22 +95,22 @@
 
 		cpcap_usb2_phy: phy {
 			compatible = "motorola,mapphone-cpcap-usb-phy";
-			pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
+			pinctrl-0 = <&usb_gpio_mux_sel1>, <&usb_gpio_mux_sel2>;
 			pinctrl-1 = <&usb_ulpi_pins>;
 			pinctrl-2 = <&usb_utmi_pins>;
 			pinctrl-3 = <&uart3_pins>;
 			pinctrl-names = "default", "ulpi", "utmi", "uart";
 			#phy-cells = <0>;
-			interrupts-extended = <
-				&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
-				&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
-				&cpcap 48 0
-			>;
+			interrupts-extended =
+				<&cpcap 15 0>, <&cpcap 14 0>, <&cpcap 28 0>,
+				<&cpcap 19 0>, <&cpcap 18 0>, <&cpcap 17 0>,
+				<&cpcap 16 0>, <&cpcap 49 0>, <&cpcap 48 0>;
 			interrupt-names =
-				"id_ground", "id_float", "se0conn", "vbusvld",
-				"sessvld", "sessend", "se1", "dm", "dp";
-			mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
-				      &gpio1 0 GPIO_ACTIVE_HIGH>;
+				"id_ground", "id_float", "se0conn",
+				"vbusvld", "sessvld", "sessend",
+				"se1", "dm", "dp";
+			mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,
+				     <&gpio1 0 GPIO_ACTIVE_HIGH>;
 			io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
 			io-channel-names = "vbus", "id";
 			vusb-supply = <&vusb>;
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
index a4423ff0df39..f7cc8fc678fa 100644
--- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -133,7 +133,7 @@
 		dais = <&mcbsp2_port>, <&mcbsp3_port>;
 	};
 
-	pwm8: dmtimer-pwm-8 {
+	pwm8: pwm-8 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&vibrator_direction_pin>;
 
@@ -143,7 +143,7 @@
 		ti,clock-source = <0x01>;
 	};
 
-	pwm9: dmtimer-pwm-9 {
+	pwm9: pwm-9 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&vibrator_enable_pin>;
 
@@ -310,7 +310,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 	wlcore: wlcore@2 {
-		compatible = "ti,wl1285", "ti,wl1283";
+		compatible = "ti,wl1285";
 		reg = <2>;
 		/* gpio_100 with gpmc_wait2 pad as wakeirq */
 		interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts
index eb5291b0ee3a..e07b807b4cec 100644
--- a/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ b/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -79,7 +79,7 @@
 	clocks = <&ref12>;
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
index f5f070a87482..11cbea5b94d2 100644
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -93,8 +93,8 @@
 			clock-names = "PCLK";
 		};
 
-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
 			reg = <0x98e00000 0x5C>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;
@@ -138,7 +138,7 @@
 			status = "disabled";
 		};
 
-		uart0: uart@98200000 {
+		uart0: serial@98200000 {
 			compatible = "ns16550a";
 			reg = <0x98200000 0x20>;
 			interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi
index 37f5023f529c..b99577d411b1 100644
--- a/arch/arm/boot/dts/mps2.dtsi
+++ b/arch/arm/boot/dts/mps2.dtsi
@@ -216,8 +216,13 @@
 			compatible = "syscon", "simple-mfd";
 			reg = <0x8000 0x10>;
 
-			led0 {
+			ranges = <0x0 0x8000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@0,0 {
 				compatible = "register-bit-led";
+				reg = <0x00 0x04>;
 				offset = <0x0>;
 				mask = <0x01>;
 				label = "userled:0";
@@ -225,8 +230,9 @@
 				default-state = "on";
 			};
 
-			led1 {
+			led@0,1 {
 				compatible = "register-bit-led";
+				reg = <0x00 0x04>;
 				offset = <0x0>;
 				mask = <0x02>;
 				label = "userled:1";
diff --git a/arch/arm/boot/dts/mstar-infinity.dtsi b/arch/arm/boot/dts/mstar-infinity.dtsi
index 0bee517797f4..441a917b88ba 100644
--- a/arch/arm/boot/dts/mstar-infinity.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity.dtsi
@@ -8,6 +8,40 @@
 
 #include <dt-bindings/gpio/msc313-gpio.h>
 
+/ {
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
 &imi {
 	reg = <0xa0000000 0x16000>;
 };
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
new file mode 100644
index 000000000000..34df472fed71
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ * Author: Romain Perier <romain.perier@gmail.com>
+ */
+
+/ {
+	reg_vcc_dram: regulator-vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_dram";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts
new file mode 100644
index 000000000000..f25a04c98ccb
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d.dtsi"
+
+/ {
+	model = "DongShanPi One";
+	compatible = "100ask,dongshanpione", "mstar,infinity2m";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts
new file mode 100644
index 000000000000..1bbbf47132dc
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d.dtsi"
+
+/ {
+	model = "Miyoo Mini";
+	compatible = "miyoo,miyoo-mini", "mstar,infinity2m";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-unitv2.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-unitv2.dts
new file mode 100644
index 000000000000..a81684002e45
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-unitv2.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d.dtsi"
+
+/ {
+	model = "UnitV2";
+	compatible = "m5stack,unitv2", "mstar,infinity2m";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
new file mode 100644
index 000000000000..b15c40762bc0
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ * Author: Romain Perier <romain.perier@gmail.com>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Wireless Tag IDO-SBC2D06-1VB-22W";
+	compatible = "wirelesstag,ido-sbc2d06-v1b-22w", "mstar,infinity2m";
+
+	leds {
+		compatible = "gpio-leds";
+		sys_led {
+			gpios = <&gpio SSD20XD_GPIO_GPIO85 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
new file mode 100644
index 000000000000..d877aff85033
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ * Author: Romain Perier <romain.perier@gmail.com>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d.dtsi"
+#include "mstar-infinity2m-ssd201-som2d01.dtsi"
+
+/ {
+	model = "Wireless Tag IDO-SOM2D01 (SSD202D)";
+	compatible = "wirelesstag,ido-som2d01", "mstar,infinity2m";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&reg_vcc_dram {
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi
index 7a5e28b33f96..6f067da61ba3 100644
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi
@@ -6,6 +6,11 @@
 
 #include "mstar-infinity2m.dtsi"
 
+&gpio {
+	compatible = "sstar,ssd20xd-gpio";
+	status = "okay";
+};
+
 &smpctrl {
 	compatible = "sstar,ssd201-smpctrl", "mstar,smpctrl";
 	status = "okay";
diff --git a/arch/arm/boot/dts/mstar-infinity2m.dtsi b/arch/arm/boot/dts/mstar-infinity2m.dtsi
index 6d4d1d224e96..1b485efd7156 100644
--- a/arch/arm/boot/dts/mstar-infinity2m.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity2m.dtsi
@@ -6,11 +6,28 @@
 
 #include "mstar-infinity.dtsi"
 
+&cpu0_opp_table {
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+};
+
 &cpus {
 	cpu1: cpu@1 {
 		device_type = "cpu";
 		compatible = "arm,cortex-a7";
+		operating-points-v2 = <&cpu0_opp_table>;
 		reg = <0x1>;
+		clocks = <&cpupll>;
+		clock-names = "cpuclk";
 	};
 };
 
diff --git a/arch/arm/boot/dts/mstar-infinity3.dtsi b/arch/arm/boot/dts/mstar-infinity3.dtsi
index 9857e2a9934d..a56cf29e5d82 100644
--- a/arch/arm/boot/dts/mstar-infinity3.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity3.dtsi
@@ -6,6 +6,64 @@
 
 #include "mstar-infinity.dtsi"
 
+&cpu0_opp_table {
+	opp-1008000000 {
+		opp-hz = /bits/ 64 <1008000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+	};
+
+	// overclock frequencies below, shown to work fine up to 1.3 GHz
+	opp-108000000 {
+		opp-hz = /bits/ 64 <1080000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1188000000 {
+		opp-hz = /bits/ 64 <1188000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1296000000 {
+		opp-hz = /bits/ 64 <1296000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1350000000 {
+		opp-hz = /bits/ 64 <1350000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1404000000 {
+		opp-hz = /bits/ 64 <1404000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1458000000 {
+		opp-hz = /bits/ 64 <1458000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1512000000 {
+		opp-hz = /bits/ 64 <1512000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+};
+
 &imi {
 	reg = <0xa0000000 0x20000>;
 };
diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi
index b0a21b0b731f..3eeafd8c7121 100644
--- a/arch/arm/boot/dts/mstar-v7.dtsi
+++ b/arch/arm/boot/dts/mstar-v7.dtsi
@@ -6,6 +6,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mstar-msc313-mpll.h>
 
 / {
 	#address-cells = <1>;
@@ -20,6 +21,8 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x0>;
+			clocks = <&cpupll>;
+			clock-names = "cpuclk";
 		};
 	};
 
@@ -38,6 +41,7 @@
 		 * u-boot is broken
 		 */
 		clock-frequency = <6000000>;
+		arm,cpu-registers-not-fw-configured;
 	};
 
 	pmu: pmu {
@@ -46,6 +50,29 @@
 		interrupt-affinity = <&cpu0>;
 	};
 
+	clocks: clocks {
+		xtal: xtal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		rtc_xtal: rtc_xtal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			status = "disabled";
+		};
+
+		xtal_div2: xtal_div2 {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&xtal>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -85,6 +112,20 @@
 				mask = <0x79>;
 			};
 
+			rtc@2400 {
+				compatible = "mstar,msc313-rtc";
+				reg = <0x2400 0x40>;
+				clocks = <&xtal_div2>;
+				interrupts-extended = <&intc_irq GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			watchdog@6000 {
+				compatible = "mstar,msc313e-wdt";
+				reg = <0x6000 0x1f>;
+				clocks = <&xtal_div2>;
+			};
+
+
 			intc_fiq: interrupt-controller@201310 {
 				compatible = "mstar,mst-intc";
 				reg = <0x201310 0x40>;
@@ -109,6 +150,20 @@
 				reg = <0x204400 0x200>;
 			};
 
+			mpll: mpll@206000 {
+				compatible = "mstar,msc313-mpll";
+				#clock-cells = <1>;
+				reg = <0x206000 0x200>;
+				clocks = <&xtal>;
+			};
+
+			cpupll: cpupll@206400 {
+				compatible = "mstar,msc313-cpupll";
+				reg = <0x206400 0x200>;
+				#clock-cells = <0>;
+				clocks = <&mpll MSTAR_MSC313_MPLL_DIV2>;
+			};
+
 			gpio: gpio@207800 {
 				#gpio-cells = <2>;
 				reg = <0x207800 0x200>;
@@ -119,7 +174,7 @@
 				status = "disabled";
 			};
 
-			pm_uart: uart@221000 {
+			pm_uart: serial@221000 {
 				compatible = "ns16550a";
 				reg = <0x221000 0x100>;
 				reg-shift = <3>;
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index fade14284017..ce6a4015fed5 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -178,7 +178,6 @@
 		compatible = "mediatek,mt2701-pinctrl";
 		reg = <0 0x1000b000 0 0x1000>;
 		mediatek,pctl-regmap = <&syscfg_pctl_a>;
-		pins-are-numbered;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -360,7 +359,7 @@
 		mediatek,apmixedsys = <&apmixedsys>;
 	};
 
-	nandc: nfi@1100d000 {
+	nandc: nand-controller@1100d000 {
 		compatible = "mediatek,mt2701-nfc";
 		reg = <0 0x1100d000 0 0x1000>;
 		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
@@ -427,9 +426,9 @@
 
 		afe: audio-controller {
 			compatible = "mediatek,mt2701-audio";
-			interrupts =  <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
 				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-names	= "afe", "asys";
+			interrupt-names = "afe", "asys";
 			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
 
 			clocks = <&infracfg CLK_INFRA_AUDIO>,
@@ -559,12 +558,11 @@
 		compatible = "mediatek,mt2701-jpgdec";
 		reg = <0 0x15004000 0 0x1000>;
 		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
+		clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
 			  <&imgsys CLK_IMG_JPGDEC>;
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
@@ -574,10 +572,9 @@
 			     "mediatek,mtk-jpgenc";
 		reg = <0 0x1500a000 0 0x1000>;
 		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_VENC>;
+		clocks = <&imgsys CLK_IMG_VENC>;
 		clock-names = "jpgenc";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
 	};
@@ -607,7 +604,7 @@
 	};
 
 	usb0: usb@1a1c0000 {
-		compatible = "mediatek,mt8173-xhci";
+		compatible = "mediatek,mt2701-xhci", "mediatek,mtk-xhci";
 		reg = <0 0x1a1c0000 0 0x1000>,
 		      <0 0x1a1c4700 0 0x0100>;
 		reg-names = "mac", "ippc";
@@ -620,8 +617,9 @@
 		status = "disabled";
 	};
 
-	u3phy0: usb-phy@1a1c4000 {
-		compatible = "mediatek,mt2701-u3phy";
+	u3phy0: t-phy@1a1c4000 {
+		compatible = "mediatek,mt2701-tphy",
+			     "mediatek,generic-tphy-v1";
 		reg = <0 0x1a1c4000 0 0x0700>;
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -646,7 +644,7 @@
 	};
 
 	usb1: usb@1a240000 {
-		compatible = "mediatek,mt8173-xhci";
+		compatible = "mediatek,mt2701-xhci", "mediatek,mtk-xhci";
 		reg = <0 0x1a240000 0 0x1000>,
 		      <0 0x1a244700 0 0x0100>;
 		reg-names = "mac", "ippc";
@@ -659,8 +657,9 @@
 		status = "disabled";
 	};
 
-	u3phy1: usb-phy@1a244000 {
-		compatible = "mediatek,mt2701-u3phy";
+	u3phy1: t-phy@1a244000 {
+		compatible = "mediatek,mt2701-tphy",
+			     "mediatek,generic-tphy-v1";
 		reg = <0 0x1a244000 0 0x0700>;
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -700,8 +699,9 @@
 		status = "disabled";
 	};
 
-	u2phy0: usb-phy@11210000 {
-		compatible = "mediatek,generic-tphy-v1";
+	u2phy0: t-phy@11210000 {
+		compatible = "mediatek,mt2701-tphy",
+			     "mediatek,generic-tphy-v1";
 		reg = <0 0x11210000 0 0x0800>;
 		#address-cells = <2>;
 		#size-cells = <2>;
diff --git a/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts b/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts
new file mode 100644
index 000000000000..b057e037f940
--- /dev/null
+++ b/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Maxim Kutnij <gtk3@inbox.ru>
+ */
+
+/dts-v1/;
+#include "mt6582.dtsi"
+
+/ {
+	model = "Prestigio PMT5008 3G";
+	compatible = "prestigio,pmt5008-3g", "mediatek,mt6582";
+
+	aliases {
+		bootargs = "console=ttyS0,921600n8 earlyprintk";
+		serial0 = &uart0;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt6582.dtsi b/arch/arm/boot/dts/mt6582.dtsi
new file mode 100644
index 000000000000..4263371784cd
--- /dev/null
+++ b/arch/arm/boot/dts/mt6582.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Maxim Kutnij <gtk3@inbox.ru>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mediatek,mt6582";
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer: timer@11008000 {
+		compatible = "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt6582-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200100 0x1c>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10211000 0x1000>,
+		      <0x10212000 0x2000>,
+		      <0x10214000 0x2000>,
+		      <0x10216000 0x2000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt6582-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11002000 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt6582-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11003000 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt6582-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11004000 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt6582-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11005000 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt6582-wdt",
+			     "mediatek,mt6589-wdt";
+		reg = <0x10007000 0x100>;
+	};
+};
diff --git a/arch/arm/boot/dts/mt6589-fairphone-fp1.dts b/arch/arm/boot/dts/mt6589-fairphone-fp1.dts
new file mode 100644
index 000000000000..c952347981de
--- /dev/null
+++ b/arch/arm/boot/dts/mt6589-fairphone-fp1.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+#include "mt6589.dtsi"
+
+/ {
+	model = "Fairphone 1";
+	compatible = "fairphone,fp1", "mediatek,mt6589";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&cpus {
+	/* SMP is not stable on this board, makes the kernel panic */
+	/delete-property/ enable-method;
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi
index f3ccb70c0779..c6babc8ad2ba 100644
--- a/arch/arm/boot/dts/mt6589.dtsi
+++ b/arch/arm/boot/dts/mt6589.dtsi
@@ -14,9 +14,10 @@
 	compatible = "mediatek,mt6589";
 	interrupt-parent = <&sysirq>;
 
-	cpus {
+	cpus: cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
 
 		cpu@0 {
 			device_type = "cpu";
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index aea6809500d7..11379c3e6b4c 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -160,7 +160,7 @@
 
 				trips {
 					cpu_passive: cpu-passive {
-						temperature = <47000>;
+						temperature = <57000>;
 						hysteresis = <2000>;
 						type = "passive";
 					};
@@ -241,7 +241,7 @@
 	};
 
 	pericfg: syscon@10003000 {
-		compatible =  "mediatek,mt7623-pericfg",
+		compatible = "mediatek,mt7623-pericfg",
 			      "mediatek,mt2701-pericfg",
 			      "syscon";
 		reg = <0 0x10003000 0 0x1000>;
@@ -253,7 +253,6 @@
 		compatible = "mediatek,mt7623-pinctrl";
 		reg = <0 0x1000b000 0 0x1000>;
 		mediatek,pctl-regmap = <&syscfg_pctl_a>;
-		pins-are-numbered;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -585,6 +584,39 @@
 		status = "disabled";
 	};
 
+	usb0: usb@11200000 {
+		compatible = "mediatek,mt7623-musb",
+			     "mediatek,mtk-musb";
+		reg = <0 0x11200000 0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "mc";
+		phys = <&u2port2 PHY_TYPE_USB2>;
+		dr_mode = "otg";
+		clocks = <&pericfg CLK_PERI_USB0>,
+			 <&pericfg CLK_PERI_USB0_MCU>,
+			 <&pericfg CLK_PERI_USB_SLV>;
+		clock-names = "main","mcu","univpll";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+		status = "disabled";
+	};
+
+	u2phy1: t-phy@11210000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x11210000 0 0x0800>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port2: usb-phy@11210800 {
+			reg = <0 0x11210800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+		};
+	};
+
 	audsys: clock-controller@11220000 {
 		compatible = "mediatek,mt7623-audsys",
 			     "mediatek,mt2701-audsys",
@@ -595,9 +627,9 @@
 		afe: audio-controller {
 			compatible = "mediatek,mt7623-audio",
 				     "mediatek,mt2701-audio";
-			interrupts =  <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
 				      <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-names	= "afe", "asys";
+			interrupt-names = "afe", "asys";
 			power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
 
 			clocks = <&infracfg CLK_INFRA_AUDIO>,
@@ -787,8 +819,9 @@
 		};
 	};
 
-	pcie0_phy: pcie-phy@1a149000 {
-		compatible = "mediatek,generic-tphy-v1";
+	pcie0_phy: t-phy@1a149000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
 		reg = <0 0x1a149000 0 0x0700>;
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -804,8 +837,9 @@
 		};
 	};
 
-	pcie1_phy: pcie-phy@1a14a000 {
-		compatible = "mediatek,generic-tphy-v1";
+	pcie1_phy: t-phy@1a14a000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
 		reg = <0 0x1a14a000 0 0x0700>;
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -823,7 +857,7 @@
 
 	usb1: usb@1a1c0000 {
 		compatible = "mediatek,mt7623-xhci",
-			     "mediatek,mt8173-xhci";
+			     "mediatek,mtk-xhci";
 		reg = <0 0x1a1c0000 0 0x1000>,
 		      <0 0x1a1c4700 0 0x0100>;
 		reg-names = "mac", "ippc";
@@ -836,9 +870,9 @@
 		status = "disabled";
 	};
 
-	u3phy1: usb-phy@1a1c4000 {
-		compatible = "mediatek,mt7623-u3phy",
-			     "mediatek,mt2701-u3phy";
+	u3phy1: t-phy@1a1c4000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
 		reg = <0 0x1a1c4000 0 0x0700>;
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -864,7 +898,7 @@
 
 	usb2: usb@1a240000 {
 		compatible = "mediatek,mt7623-xhci",
-			     "mediatek,mt8173-xhci";
+			     "mediatek,mtk-xhci";
 		reg = <0 0x1a240000 0 0x1000>,
 		      <0 0x1a244700 0 0x0100>;
 		reg-names = "mac", "ippc";
@@ -877,9 +911,9 @@
 		status = "disabled";
 	};
 
-	u3phy2: usb-phy@1a244000 {
-		compatible = "mediatek,mt7623-u3phy",
-			     "mediatek,mt2701-u3phy";
+	u3phy2: t-phy@1a244000 {
+		compatible = "mediatek,mt7623-tphy",
+			     "mediatek,generic-tphy-v1";
 		reg = <0 0x1a244000 0 0x0700>;
 		#address-cells = <2>;
 		#size-cells = <2>;
diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
index 13c86936d1c8..e8b4b6d30d19 100644
--- a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
@@ -45,13 +45,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_a>;
 
-		factory {
+		button-factory {
 			label = "factory";
 			linux,code = <BTN_0>;
 			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
index 88d8f0b2f4c2..61f5da68d4b0 100644
--- a/arch/arm/boot/dts/mt7623a-rfb-nand.dts
+++ b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
@@ -45,13 +45,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_a>;
 
-		factory {
+		button-factory {
 			label = "factory";
 			linux,code = <BTN_0>;
 			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi
index 0735a1fb8ad9..d304b62d24b5 100644
--- a/arch/arm/boot/dts/mt7623a.dtsi
+++ b/arch/arm/boot/dts/mt7623a.dtsi
@@ -35,6 +35,10 @@
 	clock-names = "ethif";
 };
 
+&usb0 {
+	power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
 &usb1 {
 	power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
 };
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index e96aa0ed1ebd..ece61a6a7a89 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -91,13 +91,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_a>;
 
-		factory {
+		button-factory {
 			label = "factory";
 			linux,code = <BTN_0>;
 			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
@@ -322,6 +322,12 @@
 	vqmmc-supply = <&reg_3p3v>;
 };
 
+&mt6323keys {
+	home {
+		status = "disabled";
+	};
+};
+
 &mt6323_leds {
 	status = "okay";
 
@@ -366,6 +372,14 @@
 	status = "okay";
 };
 
+&pio {
+	musb_pins: musb {
+		pins-musb {
+			pinmux = <MT7623_PIN_237_EXT_SDIO2_FUNC_DRV_VBUS>;
+		};
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm_pins_a>;
@@ -396,6 +410,19 @@
 	status = "okay";
 };
 
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&musb_pins>;
+	status = "okay";
+	usb-role-switch;
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &usb1 {
 	vusb33-supply = <&reg_3p3v>;
 	vbus-supply = <&reg_5v>;
@@ -408,6 +435,10 @@
 	status = "okay";
 };
 
+&u2phy1 {
+	status = "okay";
+};
+
 &u3phy1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index 1b9b9a8145a7..bf67a8e9be59 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -60,13 +60,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_a>;
 
-		factory {
+		button-factory {
 			label = "factory";
 			linux,code = <BTN_0>;
 			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi
index 1880ac9e32cf..3adab5cd1fef 100644
--- a/arch/arm/boot/dts/mt7623n.dtsi
+++ b/arch/arm/boot/dts/mt7623n.dtsi
@@ -121,7 +121,6 @@
 		clock-names = "jpgdec-smi",
 			      "jpgdec";
 		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
 		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
 			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
 	};
@@ -144,7 +143,6 @@
 		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_OVL>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	rdma0: rdma@14008000 {
@@ -154,7 +152,6 @@
 		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_RDMA>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	wdma@14009000 {
@@ -164,7 +161,6 @@
 		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_WDMA>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	bls: pwm@1400a000 {
@@ -215,7 +211,6 @@
 		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&mmsys CLK_MM_DISP_RDMA1>;
 		iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
-		mediatek,larb = <&larb0>;
 	};
 
 	dpi0: dpi@14014000 {
@@ -246,7 +241,7 @@
 		status = "disabled";
 	};
 
-	mipi_tx0: mipi-dphy@10010000 {
+	mipi_tx0: dsi-phy@10010000 {
 		compatible = "mediatek,mt7623-mipi-tx",
 			     "mediatek,mt2701-mipi-tx";
 		reg = <0 0x10010000 0 0x90>;
@@ -265,7 +260,7 @@
 		status = "disabled";
 	};
 
-	hdmi_phy: phy@10209100 {
+	hdmi_phy: hdmi-phy@10209100 {
 		compatible = "mediatek,mt7623-hdmi-phy",
 			     "mediatek,mt2701-hdmi-phy";
 		reg = <0 0x10209100 0 0x24>;
diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
index 9980c10c6e29..84e14bee7235 100644
--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@@ -23,13 +23,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		reset {
+		button-reset {
 			label = "factory";
 			linux,code = <KEY_RESTART>;
 			gpios = <&pio 60 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "wps";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&pio 58 GPIO_ACTIVE_LOW>;
@@ -140,9 +140,10 @@
 	};
 };
 
-&pcie {
+&pcie1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
 };
 
 &pciephy1 {
diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
index 5cbb3d244c75..acab0883a3bb 100644
--- a/arch/arm/boot/dts/mt7629.dtsi
+++ b/arch/arm/boot/dts/mt7629.dtsi
@@ -106,8 +106,7 @@
 			compatible = "mediatek,mt7629-timer",
 				     "mediatek,mt6765-timer";
 			reg = <0x10009000 0x60>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk20m>;
 			clock-names = "clk20m";
 		};
@@ -329,8 +328,9 @@
 			status = "disabled";
 		};
 
-		u3phy0: usb-phy@1a0c4000 {
-			compatible = "mediatek,generic-tphy-v2";
+		u3phy0: t-phy@1a0c4000 {
+			compatible = "mediatek,mt7629-tphy",
+				     "mediatek,generic-tphy-v2";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x1a0c4000 0xe00>;
@@ -360,16 +360,21 @@
 			#reset-cells = <1>;
 		};
 
-		pcie: pcie@1a140000 {
+		pciecfg: pciecfg@1a140000 {
+			compatible = "mediatek,generic-pciecfg", "syscon";
+			reg = <0x1a140000 0x1000>;
+		};
+
+		pcie1: pcie@1a145000 {
 			compatible = "mediatek,mt7629-pcie";
 			device_type = "pci";
-			reg = <0x1a140000 0x1000>,
-			      <0x1a145000 0x1000>;
-			reg-names = "subsys","port1";
+			reg = <0x1a145000 0x1000>;
+			reg-names = "port1";
+			linux,pci-domain = <1>;
 			#address-cells = <3>;
 			#size-cells = <2>;
-			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
-				     <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "pcie_irq";
 			clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
 				 <&pciesys CLK_PCIE_P0_AHB_EN>,
 				 <&pciesys CLK_PCIE_P1_AUX_EN>,
@@ -390,37 +395,30 @@
 			power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
 			bus-range = <0x00 0xff>;
 			ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
+			status = "disabled";
 
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
 				#interrupt-cells = <1>;
-				ranges;
-				num-lanes = <1>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-						<0 0 0 2 &pcie_intc1 1>,
-						<0 0 0 3 &pcie_intc1 2>,
-						<0 0 0 4 &pcie_intc1 3>;
-
-				pcie_intc1: interrupt-controller {
-					interrupt-controller;
-					#address-cells = <0>;
-					#interrupt-cells = <1>;
-				};
 			};
 		};
 
-		pciephy1: pcie-phy@1a14a000 {
-			compatible = "mediatek,generic-tphy-v2";
+		pciephy1: t-phy@1a14a000 {
+			compatible = "mediatek,mt7629-tphy",
+				     "mediatek,generic-tphy-v2";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x1a14a000 0x1000>;
 			status = "disabled";
 
-			pcieport1: port1phy@0 {
+			pcieport1: pcie-phy@0 {
 				reg = <0 0x1000>;
 				clocks = <&clk20m>;
 				clock-names = "ref";
diff --git a/arch/arm/boot/dts/mt8135-pinfunc.h b/arch/arm/boot/dts/mt8135-pinfunc.h
deleted file mode 100644
index ce0cb5a440eb..000000000000
--- a/arch/arm/boot/dts/mt8135-pinfunc.h
+++ /dev/null
@@ -1,1294 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2014 MediaTek Inc.
- * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com>
- */
-
-#ifndef __DTS_MT8135_PINFUNC_H
-#define __DTS_MT8135_PINFUNC_H
-
-#include <dt-bindings/pinctrl/mt65xx.h>
-
-#define MT8135_PIN_0_MSDC0_DAT7__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
-#define MT8135_PIN_0_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(0) | 1)
-#define MT8135_PIN_0_MSDC0_DAT7__FUNC_EINT49 (MTK_PIN_NO(0) | 2)
-#define MT8135_PIN_0_MSDC0_DAT7__FUNC_I2SOUT_DAT (MTK_PIN_NO(0) | 3)
-#define MT8135_PIN_0_MSDC0_DAT7__FUNC_DAC_DAT_OUT (MTK_PIN_NO(0) | 4)
-#define MT8135_PIN_0_MSDC0_DAT7__FUNC_PCM1_DO (MTK_PIN_NO(0) | 5)
-#define MT8135_PIN_0_MSDC0_DAT7__FUNC_SPI1_MO (MTK_PIN_NO(0) | 6)
-#define MT8135_PIN_0_MSDC0_DAT7__FUNC_NALE (MTK_PIN_NO(0) | 7)
-
-#define MT8135_PIN_1_MSDC0_DAT6__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
-#define MT8135_PIN_1_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(1) | 1)
-#define MT8135_PIN_1_MSDC0_DAT6__FUNC_EINT48 (MTK_PIN_NO(1) | 2)
-#define MT8135_PIN_1_MSDC0_DAT6__FUNC_I2SIN_WS (MTK_PIN_NO(1) | 3)
-#define MT8135_PIN_1_MSDC0_DAT6__FUNC_DAC_WS (MTK_PIN_NO(1) | 4)
-#define MT8135_PIN_1_MSDC0_DAT6__FUNC_PCM1_WS (MTK_PIN_NO(1) | 5)
-#define MT8135_PIN_1_MSDC0_DAT6__FUNC_SPI1_CSN (MTK_PIN_NO(1) | 6)
-#define MT8135_PIN_1_MSDC0_DAT6__FUNC_NCLE (MTK_PIN_NO(1) | 7)
-
-#define MT8135_PIN_2_MSDC0_DAT5__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
-#define MT8135_PIN_2_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(2) | 1)
-#define MT8135_PIN_2_MSDC0_DAT5__FUNC_EINT47 (MTK_PIN_NO(2) | 2)
-#define MT8135_PIN_2_MSDC0_DAT5__FUNC_I2SIN_CK (MTK_PIN_NO(2) | 3)
-#define MT8135_PIN_2_MSDC0_DAT5__FUNC_DAC_CK (MTK_PIN_NO(2) | 4)
-#define MT8135_PIN_2_MSDC0_DAT5__FUNC_PCM1_CK (MTK_PIN_NO(2) | 5)
-#define MT8135_PIN_2_MSDC0_DAT5__FUNC_SPI1_CLK (MTK_PIN_NO(2) | 6)
-#define MT8135_PIN_2_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(2) | 7)
-
-#define MT8135_PIN_3_MSDC0_DAT4__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
-#define MT8135_PIN_3_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(3) | 1)
-#define MT8135_PIN_3_MSDC0_DAT4__FUNC_EINT46 (MTK_PIN_NO(3) | 2)
-#define MT8135_PIN_3_MSDC0_DAT4__FUNC_A_FUNC_CK (MTK_PIN_NO(3) | 3)
-#define MT8135_PIN_3_MSDC0_DAT4__FUNC_LSCE1B_2X (MTK_PIN_NO(3) | 6)
-#define MT8135_PIN_3_MSDC0_DAT4__FUNC_NLD5 (MTK_PIN_NO(3) | 7)
-
-#define MT8135_PIN_4_MSDC0_CMD__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
-#define MT8135_PIN_4_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(4) | 1)
-#define MT8135_PIN_4_MSDC0_CMD__FUNC_EINT41 (MTK_PIN_NO(4) | 2)
-#define MT8135_PIN_4_MSDC0_CMD__FUNC_A_FUNC_DOUT_0 (MTK_PIN_NO(4) | 3)
-#define MT8135_PIN_4_MSDC0_CMD__FUNC_USB_TEST_IO_0 (MTK_PIN_NO(4) | 5)
-#define MT8135_PIN_4_MSDC0_CMD__FUNC_LRSTB_2X (MTK_PIN_NO(4) | 6)
-#define MT8135_PIN_4_MSDC0_CMD__FUNC_NRNB (MTK_PIN_NO(4) | 7)
-
-#define MT8135_PIN_5_MSDC0_CLK__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
-#define MT8135_PIN_5_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(5) | 1)
-#define MT8135_PIN_5_MSDC0_CLK__FUNC_EINT40 (MTK_PIN_NO(5) | 2)
-#define MT8135_PIN_5_MSDC0_CLK__FUNC_A_FUNC_DOUT_1 (MTK_PIN_NO(5) | 3)
-#define MT8135_PIN_5_MSDC0_CLK__FUNC_USB_TEST_IO_1 (MTK_PIN_NO(5) | 5)
-#define MT8135_PIN_5_MSDC0_CLK__FUNC_LPTE (MTK_PIN_NO(5) | 6)
-#define MT8135_PIN_5_MSDC0_CLK__FUNC_NREB (MTK_PIN_NO(5) | 7)
-
-#define MT8135_PIN_6_MSDC0_DAT3__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
-#define MT8135_PIN_6_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(6) | 1)
-#define MT8135_PIN_6_MSDC0_DAT3__FUNC_EINT45 (MTK_PIN_NO(6) | 2)
-#define MT8135_PIN_6_MSDC0_DAT3__FUNC_A_FUNC_DOUT_2 (MTK_PIN_NO(6) | 3)
-#define MT8135_PIN_6_MSDC0_DAT3__FUNC_USB_TEST_IO_2 (MTK_PIN_NO(6) | 5)
-#define MT8135_PIN_6_MSDC0_DAT3__FUNC_LSCE0B_2X (MTK_PIN_NO(6) | 6)
-#define MT8135_PIN_6_MSDC0_DAT3__FUNC_NLD7 (MTK_PIN_NO(6) | 7)
-
-#define MT8135_PIN_7_MSDC0_DAT2__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
-#define MT8135_PIN_7_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(7) | 1)
-#define MT8135_PIN_7_MSDC0_DAT2__FUNC_EINT44 (MTK_PIN_NO(7) | 2)
-#define MT8135_PIN_7_MSDC0_DAT2__FUNC_A_FUNC_DOUT_3 (MTK_PIN_NO(7) | 3)
-#define MT8135_PIN_7_MSDC0_DAT2__FUNC_USB_TEST_IO_3 (MTK_PIN_NO(7) | 5)
-#define MT8135_PIN_7_MSDC0_DAT2__FUNC_LSA0_2X (MTK_PIN_NO(7) | 6)
-#define MT8135_PIN_7_MSDC0_DAT2__FUNC_NLD14 (MTK_PIN_NO(7) | 7)
-
-#define MT8135_PIN_8_MSDC0_DAT1__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
-#define MT8135_PIN_8_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(8) | 1)
-#define MT8135_PIN_8_MSDC0_DAT1__FUNC_EINT43 (MTK_PIN_NO(8) | 2)
-#define MT8135_PIN_8_MSDC0_DAT1__FUNC_USB_TEST_IO_4 (MTK_PIN_NO(8) | 5)
-#define MT8135_PIN_8_MSDC0_DAT1__FUNC_LSCK_2X (MTK_PIN_NO(8) | 6)
-#define MT8135_PIN_8_MSDC0_DAT1__FUNC_NLD11 (MTK_PIN_NO(8) | 7)
-
-#define MT8135_PIN_9_MSDC0_DAT0__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
-#define MT8135_PIN_9_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(9) | 1)
-#define MT8135_PIN_9_MSDC0_DAT0__FUNC_EINT42 (MTK_PIN_NO(9) | 2)
-#define MT8135_PIN_9_MSDC0_DAT0__FUNC_USB_TEST_IO_5 (MTK_PIN_NO(9) | 5)
-#define MT8135_PIN_9_MSDC0_DAT0__FUNC_LSDA_2X (MTK_PIN_NO(9) | 6)
-
-#define MT8135_PIN_10_NCEB0__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
-#define MT8135_PIN_10_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(10) | 1)
-#define MT8135_PIN_10_NCEB0__FUNC_EINT139 (MTK_PIN_NO(10) | 2)
-#define MT8135_PIN_10_NCEB0__FUNC_TESTA_OUT4 (MTK_PIN_NO(10) | 7)
-
-#define MT8135_PIN_11_NCEB1__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
-#define MT8135_PIN_11_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(11) | 1)
-#define MT8135_PIN_11_NCEB1__FUNC_EINT140 (MTK_PIN_NO(11) | 2)
-#define MT8135_PIN_11_NCEB1__FUNC_USB_DRVVBUS (MTK_PIN_NO(11) | 6)
-#define MT8135_PIN_11_NCEB1__FUNC_TESTA_OUT5 (MTK_PIN_NO(11) | 7)
-
-#define MT8135_PIN_12_NRNB__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
-#define MT8135_PIN_12_NRNB__FUNC_NRNB (MTK_PIN_NO(12) | 1)
-#define MT8135_PIN_12_NRNB__FUNC_EINT141 (MTK_PIN_NO(12) | 2)
-#define MT8135_PIN_12_NRNB__FUNC_A_FUNC_DOUT_4 (MTK_PIN_NO(12) | 3)
-#define MT8135_PIN_12_NRNB__FUNC_TESTA_OUT6 (MTK_PIN_NO(12) | 7)
-
-#define MT8135_PIN_13_NCLE__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
-#define MT8135_PIN_13_NCLE__FUNC_NCLE (MTK_PIN_NO(13) | 1)
-#define MT8135_PIN_13_NCLE__FUNC_EINT142 (MTK_PIN_NO(13) | 2)
-#define MT8135_PIN_13_NCLE__FUNC_A_FUNC_DOUT_5 (MTK_PIN_NO(13) | 3)
-#define MT8135_PIN_13_NCLE__FUNC_CM2PDN_1X (MTK_PIN_NO(13) | 4)
-#define MT8135_PIN_13_NCLE__FUNC_NALE (MTK_PIN_NO(13) | 6)
-#define MT8135_PIN_13_NCLE__FUNC_TESTA_OUT7 (MTK_PIN_NO(13) | 7)
-
-#define MT8135_PIN_14_NALE__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
-#define MT8135_PIN_14_NALE__FUNC_NALE (MTK_PIN_NO(14) | 1)
-#define MT8135_PIN_14_NALE__FUNC_EINT143 (MTK_PIN_NO(14) | 2)
-#define MT8135_PIN_14_NALE__FUNC_A_FUNC_DOUT_6 (MTK_PIN_NO(14) | 3)
-#define MT8135_PIN_14_NALE__FUNC_CM2MCLK_1X (MTK_PIN_NO(14) | 4)
-#define MT8135_PIN_14_NALE__FUNC_IRDA_RXD (MTK_PIN_NO(14) | 5)
-#define MT8135_PIN_14_NALE__FUNC_NCLE (MTK_PIN_NO(14) | 6)
-#define MT8135_PIN_14_NALE__FUNC_TESTA_OUT8 (MTK_PIN_NO(14) | 7)
-
-#define MT8135_PIN_15_NREB__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
-#define MT8135_PIN_15_NREB__FUNC_NREB (MTK_PIN_NO(15) | 1)
-#define MT8135_PIN_15_NREB__FUNC_EINT144 (MTK_PIN_NO(15) | 2)
-#define MT8135_PIN_15_NREB__FUNC_A_FUNC_DOUT_7 (MTK_PIN_NO(15) | 3)
-#define MT8135_PIN_15_NREB__FUNC_CM2RST_1X (MTK_PIN_NO(15) | 4)
-#define MT8135_PIN_15_NREB__FUNC_IRDA_TXD (MTK_PIN_NO(15) | 5)
-#define MT8135_PIN_15_NREB__FUNC_TESTA_OUT9 (MTK_PIN_NO(15) | 7)
-
-#define MT8135_PIN_16_NWEB__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
-#define MT8135_PIN_16_NWEB__FUNC_NWEB (MTK_PIN_NO(16) | 1)
-#define MT8135_PIN_16_NWEB__FUNC_EINT145 (MTK_PIN_NO(16) | 2)
-#define MT8135_PIN_16_NWEB__FUNC_A_FUNC_DIN_0 (MTK_PIN_NO(16) | 3)
-#define MT8135_PIN_16_NWEB__FUNC_CM2PCLK_1X (MTK_PIN_NO(16) | 4)
-#define MT8135_PIN_16_NWEB__FUNC_IRDA_PDN (MTK_PIN_NO(16) | 5)
-#define MT8135_PIN_16_NWEB__FUNC_TESTA_OUT10 (MTK_PIN_NO(16) | 7)
-
-#define MT8135_PIN_17_NLD0__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
-#define MT8135_PIN_17_NLD0__FUNC_NLD0 (MTK_PIN_NO(17) | 1)
-#define MT8135_PIN_17_NLD0__FUNC_EINT146 (MTK_PIN_NO(17) | 2)
-#define MT8135_PIN_17_NLD0__FUNC_A_FUNC_DIN_1 (MTK_PIN_NO(17) | 3)
-#define MT8135_PIN_17_NLD0__FUNC_CM2DAT_1X_0 (MTK_PIN_NO(17) | 4)
-#define MT8135_PIN_17_NLD0__FUNC_I2SIN_CK (MTK_PIN_NO(17) | 5)
-#define MT8135_PIN_17_NLD0__FUNC_DAC_CK (MTK_PIN_NO(17) | 6)
-#define MT8135_PIN_17_NLD0__FUNC_TESTA_OUT11 (MTK_PIN_NO(17) | 7)
-
-#define MT8135_PIN_18_NLD1__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
-#define MT8135_PIN_18_NLD1__FUNC_NLD1 (MTK_PIN_NO(18) | 1)
-#define MT8135_PIN_18_NLD1__FUNC_EINT147 (MTK_PIN_NO(18) | 2)
-#define MT8135_PIN_18_NLD1__FUNC_A_FUNC_DIN_2 (MTK_PIN_NO(18) | 3)
-#define MT8135_PIN_18_NLD1__FUNC_CM2DAT_1X_1 (MTK_PIN_NO(18) | 4)
-#define MT8135_PIN_18_NLD1__FUNC_I2SIN_WS (MTK_PIN_NO(18) | 5)
-#define MT8135_PIN_18_NLD1__FUNC_DAC_WS (MTK_PIN_NO(18) | 6)
-#define MT8135_PIN_18_NLD1__FUNC_TESTA_OUT12 (MTK_PIN_NO(18) | 7)
-
-#define MT8135_PIN_19_NLD2__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
-#define MT8135_PIN_19_NLD2__FUNC_NLD2 (MTK_PIN_NO(19) | 1)
-#define MT8135_PIN_19_NLD2__FUNC_EINT148 (MTK_PIN_NO(19) | 2)
-#define MT8135_PIN_19_NLD2__FUNC_A_FUNC_DIN_3 (MTK_PIN_NO(19) | 3)
-#define MT8135_PIN_19_NLD2__FUNC_CM2DAT_1X_2 (MTK_PIN_NO(19) | 4)
-#define MT8135_PIN_19_NLD2__FUNC_I2SOUT_DAT (MTK_PIN_NO(19) | 5)
-#define MT8135_PIN_19_NLD2__FUNC_DAC_DAT_OUT (MTK_PIN_NO(19) | 6)
-#define MT8135_PIN_19_NLD2__FUNC_TESTA_OUT13 (MTK_PIN_NO(19) | 7)
-
-#define MT8135_PIN_20_NLD3__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
-#define MT8135_PIN_20_NLD3__FUNC_NLD3 (MTK_PIN_NO(20) | 1)
-#define MT8135_PIN_20_NLD3__FUNC_EINT149 (MTK_PIN_NO(20) | 2)
-#define MT8135_PIN_20_NLD3__FUNC_A_FUNC_DIN_4 (MTK_PIN_NO(20) | 3)
-#define MT8135_PIN_20_NLD3__FUNC_CM2DAT_1X_3 (MTK_PIN_NO(20) | 4)
-#define MT8135_PIN_20_NLD3__FUNC_TESTA_OUT14 (MTK_PIN_NO(20) | 7)
-
-#define MT8135_PIN_21_NLD4__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
-#define MT8135_PIN_21_NLD4__FUNC_NLD4 (MTK_PIN_NO(21) | 1)
-#define MT8135_PIN_21_NLD4__FUNC_EINT150 (MTK_PIN_NO(21) | 2)
-#define MT8135_PIN_21_NLD4__FUNC_A_FUNC_DIN_5 (MTK_PIN_NO(21) | 3)
-#define MT8135_PIN_21_NLD4__FUNC_CM2DAT_1X_4 (MTK_PIN_NO(21) | 4)
-#define MT8135_PIN_21_NLD4__FUNC_TESTA_OUT15 (MTK_PIN_NO(21) | 7)
-
-#define MT8135_PIN_22_NLD5__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
-#define MT8135_PIN_22_NLD5__FUNC_NLD5 (MTK_PIN_NO(22) | 1)
-#define MT8135_PIN_22_NLD5__FUNC_EINT151 (MTK_PIN_NO(22) | 2)
-#define MT8135_PIN_22_NLD5__FUNC_A_FUNC_DIN_6 (MTK_PIN_NO(22) | 3)
-#define MT8135_PIN_22_NLD5__FUNC_CM2DAT_1X_5 (MTK_PIN_NO(22) | 4)
-#define MT8135_PIN_22_NLD5__FUNC_TESTA_OUT16 (MTK_PIN_NO(22) | 7)
-
-#define MT8135_PIN_23_NLD6__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
-#define MT8135_PIN_23_NLD6__FUNC_NLD6 (MTK_PIN_NO(23) | 1)
-#define MT8135_PIN_23_NLD6__FUNC_EINT152 (MTK_PIN_NO(23) | 2)
-#define MT8135_PIN_23_NLD6__FUNC_A_FUNC_DIN_7 (MTK_PIN_NO(23) | 3)
-#define MT8135_PIN_23_NLD6__FUNC_CM2DAT_1X_6 (MTK_PIN_NO(23) | 4)
-#define MT8135_PIN_23_NLD6__FUNC_TESTA_OUT17 (MTK_PIN_NO(23) | 7)
-
-#define MT8135_PIN_24_NLD7__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
-#define MT8135_PIN_24_NLD7__FUNC_NLD7 (MTK_PIN_NO(24) | 1)
-#define MT8135_PIN_24_NLD7__FUNC_EINT153 (MTK_PIN_NO(24) | 2)
-#define MT8135_PIN_24_NLD7__FUNC_A_FUNC_DIN_8 (MTK_PIN_NO(24) | 3)
-#define MT8135_PIN_24_NLD7__FUNC_CM2DAT_1X_7 (MTK_PIN_NO(24) | 4)
-#define MT8135_PIN_24_NLD7__FUNC_TESTA_OUT18 (MTK_PIN_NO(24) | 7)
-
-#define MT8135_PIN_25_NLD8__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
-#define MT8135_PIN_25_NLD8__FUNC_NLD8 (MTK_PIN_NO(25) | 1)
-#define MT8135_PIN_25_NLD8__FUNC_EINT154 (MTK_PIN_NO(25) | 2)
-#define MT8135_PIN_25_NLD8__FUNC_CM2DAT_1X_8 (MTK_PIN_NO(25) | 4)
-
-#define MT8135_PIN_26_NLD9__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
-#define MT8135_PIN_26_NLD9__FUNC_NLD9 (MTK_PIN_NO(26) | 1)
-#define MT8135_PIN_26_NLD9__FUNC_EINT155 (MTK_PIN_NO(26) | 2)
-#define MT8135_PIN_26_NLD9__FUNC_CM2DAT_1X_9 (MTK_PIN_NO(26) | 4)
-#define MT8135_PIN_26_NLD9__FUNC_PWM1 (MTK_PIN_NO(26) | 5)
-
-#define MT8135_PIN_27_NLD10__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
-#define MT8135_PIN_27_NLD10__FUNC_NLD10 (MTK_PIN_NO(27) | 1)
-#define MT8135_PIN_27_NLD10__FUNC_EINT156 (MTK_PIN_NO(27) | 2)
-#define MT8135_PIN_27_NLD10__FUNC_CM2VSYNC_1X (MTK_PIN_NO(27) | 4)
-#define MT8135_PIN_27_NLD10__FUNC_PWM2 (MTK_PIN_NO(27) | 5)
-
-#define MT8135_PIN_28_NLD11__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
-#define MT8135_PIN_28_NLD11__FUNC_NLD11 (MTK_PIN_NO(28) | 1)
-#define MT8135_PIN_28_NLD11__FUNC_EINT157 (MTK_PIN_NO(28) | 2)
-#define MT8135_PIN_28_NLD11__FUNC_CM2HSYNC_1X (MTK_PIN_NO(28) | 4)
-#define MT8135_PIN_28_NLD11__FUNC_PWM3 (MTK_PIN_NO(28) | 5)
-
-#define MT8135_PIN_29_NLD12__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
-#define MT8135_PIN_29_NLD12__FUNC_NLD12 (MTK_PIN_NO(29) | 1)
-#define MT8135_PIN_29_NLD12__FUNC_EINT158 (MTK_PIN_NO(29) | 2)
-#define MT8135_PIN_29_NLD12__FUNC_I2SIN_CK (MTK_PIN_NO(29) | 3)
-#define MT8135_PIN_29_NLD12__FUNC_DAC_CK (MTK_PIN_NO(29) | 4)
-#define MT8135_PIN_29_NLD12__FUNC_PCM1_CK (MTK_PIN_NO(29) | 5)
-
-#define MT8135_PIN_30_NLD13__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
-#define MT8135_PIN_30_NLD13__FUNC_NLD13 (MTK_PIN_NO(30) | 1)
-#define MT8135_PIN_30_NLD13__FUNC_EINT159 (MTK_PIN_NO(30) | 2)
-#define MT8135_PIN_30_NLD13__FUNC_I2SIN_WS (MTK_PIN_NO(30) | 3)
-#define MT8135_PIN_30_NLD13__FUNC_DAC_WS (MTK_PIN_NO(30) | 4)
-#define MT8135_PIN_30_NLD13__FUNC_PCM1_WS (MTK_PIN_NO(30) | 5)
-
-#define MT8135_PIN_31_NLD14__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
-#define MT8135_PIN_31_NLD14__FUNC_NLD14 (MTK_PIN_NO(31) | 1)
-#define MT8135_PIN_31_NLD14__FUNC_EINT160 (MTK_PIN_NO(31) | 2)
-#define MT8135_PIN_31_NLD14__FUNC_I2SOUT_DAT (MTK_PIN_NO(31) | 3)
-#define MT8135_PIN_31_NLD14__FUNC_DAC_DAT_OUT (MTK_PIN_NO(31) | 4)
-#define MT8135_PIN_31_NLD14__FUNC_PCM1_DO (MTK_PIN_NO(31) | 5)
-
-#define MT8135_PIN_32_NLD15__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
-#define MT8135_PIN_32_NLD15__FUNC_NLD15 (MTK_PIN_NO(32) | 1)
-#define MT8135_PIN_32_NLD15__FUNC_EINT161 (MTK_PIN_NO(32) | 2)
-#define MT8135_PIN_32_NLD15__FUNC_DISP_PWM (MTK_PIN_NO(32) | 3)
-#define MT8135_PIN_32_NLD15__FUNC_PWM4 (MTK_PIN_NO(32) | 4)
-#define MT8135_PIN_32_NLD15__FUNC_PCM1_DI (MTK_PIN_NO(32) | 5)
-
-#define MT8135_PIN_33_MSDC0_RSTB__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
-#define MT8135_PIN_33_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(33) | 1)
-#define MT8135_PIN_33_MSDC0_RSTB__FUNC_EINT50 (MTK_PIN_NO(33) | 2)
-#define MT8135_PIN_33_MSDC0_RSTB__FUNC_I2SIN_DAT (MTK_PIN_NO(33) | 3)
-#define MT8135_PIN_33_MSDC0_RSTB__FUNC_PCM1_DI (MTK_PIN_NO(33) | 5)
-#define MT8135_PIN_33_MSDC0_RSTB__FUNC_SPI1_MI (MTK_PIN_NO(33) | 6)
-#define MT8135_PIN_33_MSDC0_RSTB__FUNC_NLD10 (MTK_PIN_NO(33) | 7)
-
-#define MT8135_PIN_34_IDDIG__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
-#define MT8135_PIN_34_IDDIG__FUNC_IDDIG (MTK_PIN_NO(34) | 1)
-#define MT8135_PIN_34_IDDIG__FUNC_EINT34 (MTK_PIN_NO(34) | 2)
-
-#define MT8135_PIN_35_SCL3__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
-#define MT8135_PIN_35_SCL3__FUNC_SCL3 (MTK_PIN_NO(35) | 1)
-#define MT8135_PIN_35_SCL3__FUNC_EINT96 (MTK_PIN_NO(35) | 2)
-#define MT8135_PIN_35_SCL3__FUNC_CLKM6 (MTK_PIN_NO(35) | 3)
-#define MT8135_PIN_35_SCL3__FUNC_PWM6 (MTK_PIN_NO(35) | 4)
-
-#define MT8135_PIN_36_SDA3__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
-#define MT8135_PIN_36_SDA3__FUNC_SDA3 (MTK_PIN_NO(36) | 1)
-#define MT8135_PIN_36_SDA3__FUNC_EINT97 (MTK_PIN_NO(36) | 2)
-
-#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
-#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_AUD_CLK (MTK_PIN_NO(37) | 1)
-#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_ADC_CK (MTK_PIN_NO(37) | 2)
-#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_HDMI_SDATA0 (MTK_PIN_NO(37) | 3)
-#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_EINT19 (MTK_PIN_NO(37) | 4)
-#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_USB_TEST_IO_6 (MTK_PIN_NO(37) | 5)
-#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_TESTA_OUT19 (MTK_PIN_NO(37) | 7)
-
-#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
-#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(38) | 1)
-#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_ADC_WS (MTK_PIN_NO(38) | 2)
-#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MISO (MTK_PIN_NO(38) | 3)
-#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_EINT21 (MTK_PIN_NO(38) | 4)
-#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_USB_TEST_IO_7 (MTK_PIN_NO(38) | 5)
-#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_TESTA_OUT20 (MTK_PIN_NO(38) | 7)
-
-#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
-#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MISO (MTK_PIN_NO(39) | 1)
-#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_ADC_DAT_IN (MTK_PIN_NO(39) | 2)
-#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(39) | 3)
-#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_EINT20 (MTK_PIN_NO(39) | 4)
-#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_USB_TEST_IO_8 (MTK_PIN_NO(39) | 5)
-#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_TESTA_OUT21 (MTK_PIN_NO(39) | 7)
-
-#define MT8135_PIN_40_DAC_CLK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
-#define MT8135_PIN_40_DAC_CLK__FUNC_DAC_CK (MTK_PIN_NO(40) | 1)
-#define MT8135_PIN_40_DAC_CLK__FUNC_EINT22 (MTK_PIN_NO(40) | 2)
-#define MT8135_PIN_40_DAC_CLK__FUNC_HDMI_SDATA1 (MTK_PIN_NO(40) | 3)
-#define MT8135_PIN_40_DAC_CLK__FUNC_USB_TEST_IO_9 (MTK_PIN_NO(40) | 5)
-#define MT8135_PIN_40_DAC_CLK__FUNC_TESTA_OUT22 (MTK_PIN_NO(40) | 7)
-
-#define MT8135_PIN_41_DAC_WS__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
-#define MT8135_PIN_41_DAC_WS__FUNC_DAC_WS (MTK_PIN_NO(41) | 1)
-#define MT8135_PIN_41_DAC_WS__FUNC_EINT24 (MTK_PIN_NO(41) | 2)
-#define MT8135_PIN_41_DAC_WS__FUNC_HDMI_SDATA2 (MTK_PIN_NO(41) | 3)
-#define MT8135_PIN_41_DAC_WS__FUNC_USB_TEST_IO_10 (MTK_PIN_NO(41) | 5)
-#define MT8135_PIN_41_DAC_WS__FUNC_TESTA_OUT23 (MTK_PIN_NO(41) | 7)
-
-#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
-#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(42) | 1)
-#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_EINT23 (MTK_PIN_NO(42) | 2)
-#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_HDMI_SDATA3 (MTK_PIN_NO(42) | 3)
-#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_USB_TEST_IO_11 (MTK_PIN_NO(42) | 5)
-#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_TESTA_OUT24 (MTK_PIN_NO(42) | 7)
-
-#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
-#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(43) | 1)
-#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_EINT29 (MTK_PIN_NO(43) | 2)
-
-#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
-#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(44) | 1)
-#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_EINT28 (MTK_PIN_NO(44) | 2)
-
-#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
-#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(45) | 1)
-#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_EINT27 (MTK_PIN_NO(45) | 2)
-
-#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
-#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(46) | 1)
-#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_EINT26 (MTK_PIN_NO(46) | 2)
-
-#define MT8135_PIN_47_PWRAP_EVENT__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
-#define MT8135_PIN_47_PWRAP_EVENT__FUNC_PWRAP_EVENT_IN (MTK_PIN_NO(47) | 1)
-#define MT8135_PIN_47_PWRAP_EVENT__FUNC_EINT25 (MTK_PIN_NO(47) | 2)
-#define MT8135_PIN_47_PWRAP_EVENT__FUNC_TESTA_OUT2 (MTK_PIN_NO(47) | 7)
-
-#define MT8135_PIN_48_RTC32K_CK__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
-#define MT8135_PIN_48_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(48) | 1)
-
-#define MT8135_PIN_49_WATCHDOG__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
-#define MT8135_PIN_49_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(49) | 1)
-#define MT8135_PIN_49_WATCHDOG__FUNC_EINT36 (MTK_PIN_NO(49) | 2)
-
-#define MT8135_PIN_50_SRCLKENA__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
-#define MT8135_PIN_50_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(50) | 1)
-#define MT8135_PIN_50_SRCLKENA__FUNC_EINT38 (MTK_PIN_NO(50) | 2)
-
-#define MT8135_PIN_51_SRCVOLTEN__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
-#define MT8135_PIN_51_SRCVOLTEN__FUNC_SRCVOLTEN (MTK_PIN_NO(51) | 1)
-#define MT8135_PIN_51_SRCVOLTEN__FUNC_EINT37 (MTK_PIN_NO(51) | 2)
-
-#define MT8135_PIN_52_EINT0__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
-#define MT8135_PIN_52_EINT0__FUNC_EINT0 (MTK_PIN_NO(52) | 1)
-#define MT8135_PIN_52_EINT0__FUNC_PWM1 (MTK_PIN_NO(52) | 2)
-#define MT8135_PIN_52_EINT0__FUNC_CLKM0 (MTK_PIN_NO(52) | 3)
-#define MT8135_PIN_52_EINT0__FUNC_SPDIF_OUT (MTK_PIN_NO(52) | 4)
-#define MT8135_PIN_52_EINT0__FUNC_USB_TEST_IO_12 (MTK_PIN_NO(52) | 5)
-#define MT8135_PIN_52_EINT0__FUNC_USB_SCL (MTK_PIN_NO(52) | 7)
-
-#define MT8135_PIN_53_URXD2__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
-#define MT8135_PIN_53_URXD2__FUNC_URXD2 (MTK_PIN_NO(53) | 1)
-#define MT8135_PIN_53_URXD2__FUNC_EINT83 (MTK_PIN_NO(53) | 2)
-#define MT8135_PIN_53_URXD2__FUNC_HDMI_LRCK (MTK_PIN_NO(53) | 4)
-#define MT8135_PIN_53_URXD2__FUNC_CLKM3 (MTK_PIN_NO(53) | 5)
-#define MT8135_PIN_53_URXD2__FUNC_UTXD2 (MTK_PIN_NO(53) | 7)
-
-#define MT8135_PIN_54_UTXD2__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
-#define MT8135_PIN_54_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(54) | 1)
-#define MT8135_PIN_54_UTXD2__FUNC_EINT82 (MTK_PIN_NO(54) | 2)
-#define MT8135_PIN_54_UTXD2__FUNC_HDMI_BCK_OUT (MTK_PIN_NO(54) | 4)
-#define MT8135_PIN_54_UTXD2__FUNC_CLKM2 (MTK_PIN_NO(54) | 5)
-#define MT8135_PIN_54_UTXD2__FUNC_URXD2 (MTK_PIN_NO(54) | 7)
-
-#define MT8135_PIN_55_UCTS2__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
-#define MT8135_PIN_55_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(55) | 1)
-#define MT8135_PIN_55_UCTS2__FUNC_EINT84 (MTK_PIN_NO(55) | 2)
-#define MT8135_PIN_55_UCTS2__FUNC_PWM1 (MTK_PIN_NO(55) | 5)
-#define MT8135_PIN_55_UCTS2__FUNC_URTS2 (MTK_PIN_NO(55) | 7)
-
-#define MT8135_PIN_56_URTS2__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
-#define MT8135_PIN_56_URTS2__FUNC_URTS2 (MTK_PIN_NO(56) | 1)
-#define MT8135_PIN_56_URTS2__FUNC_EINT85 (MTK_PIN_NO(56) | 2)
-#define MT8135_PIN_56_URTS2__FUNC_PWM2 (MTK_PIN_NO(56) | 5)
-#define MT8135_PIN_56_URTS2__FUNC_UCTS2 (MTK_PIN_NO(56) | 7)
-
-#define MT8135_PIN_57_JTCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
-#define MT8135_PIN_57_JTCK__FUNC_JTCK (MTK_PIN_NO(57) | 1)
-#define MT8135_PIN_57_JTCK__FUNC_EINT188 (MTK_PIN_NO(57) | 2)
-#define MT8135_PIN_57_JTCK__FUNC_DSP1_ICK (MTK_PIN_NO(57) | 3)
-
-#define MT8135_PIN_58_JTDO__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
-#define MT8135_PIN_58_JTDO__FUNC_JTDO (MTK_PIN_NO(58) | 1)
-#define MT8135_PIN_58_JTDO__FUNC_EINT190 (MTK_PIN_NO(58) | 2)
-#define MT8135_PIN_58_JTDO__FUNC_DSP2_IMS (MTK_PIN_NO(58) | 3)
-
-#define MT8135_PIN_59_JTRST_B__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
-#define MT8135_PIN_59_JTRST_B__FUNC_JTRST_B (MTK_PIN_NO(59) | 1)
-#define MT8135_PIN_59_JTRST_B__FUNC_EINT0 (MTK_PIN_NO(59) | 2)
-#define MT8135_PIN_59_JTRST_B__FUNC_DSP2_ICK (MTK_PIN_NO(59) | 3)
-
-#define MT8135_PIN_60_JTDI__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
-#define MT8135_PIN_60_JTDI__FUNC_JTDI (MTK_PIN_NO(60) | 1)
-#define MT8135_PIN_60_JTDI__FUNC_EINT189 (MTK_PIN_NO(60) | 2)
-#define MT8135_PIN_60_JTDI__FUNC_DSP1_IMS (MTK_PIN_NO(60) | 3)
-
-#define MT8135_PIN_61_JRTCK__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
-#define MT8135_PIN_61_JRTCK__FUNC_JRTCK (MTK_PIN_NO(61) | 1)
-#define MT8135_PIN_61_JRTCK__FUNC_EINT187 (MTK_PIN_NO(61) | 2)
-#define MT8135_PIN_61_JRTCK__FUNC_DSP1_ID (MTK_PIN_NO(61) | 3)
-
-#define MT8135_PIN_62_JTMS__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
-#define MT8135_PIN_62_JTMS__FUNC_JTMS (MTK_PIN_NO(62) | 1)
-#define MT8135_PIN_62_JTMS__FUNC_EINT191 (MTK_PIN_NO(62) | 2)
-#define MT8135_PIN_62_JTMS__FUNC_DSP2_ID (MTK_PIN_NO(62) | 3)
-
-#define MT8135_PIN_63_MSDC1_INSI__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
-#define MT8135_PIN_63_MSDC1_INSI__FUNC_MSDC1_INSI (MTK_PIN_NO(63) | 1)
-#define MT8135_PIN_63_MSDC1_INSI__FUNC_SCL5 (MTK_PIN_NO(63) | 3)
-#define MT8135_PIN_63_MSDC1_INSI__FUNC_PWM6 (MTK_PIN_NO(63) | 4)
-#define MT8135_PIN_63_MSDC1_INSI__FUNC_CLKM5 (MTK_PIN_NO(63) | 5)
-#define MT8135_PIN_63_MSDC1_INSI__FUNC_TESTB_OUT6 (MTK_PIN_NO(63) | 7)
-
-#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
-#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_MSDC1_SDWPI (MTK_PIN_NO(64) | 1)
-#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_EINT58 (MTK_PIN_NO(64) | 2)
-#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_SDA5 (MTK_PIN_NO(64) | 3)
-#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_PWM7 (MTK_PIN_NO(64) | 4)
-#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_CLKM6 (MTK_PIN_NO(64) | 5)
-#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_TESTB_OUT7 (MTK_PIN_NO(64) | 7)
-
-#define MT8135_PIN_65_MSDC2_INSI__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
-#define MT8135_PIN_65_MSDC2_INSI__FUNC_MSDC2_INSI (MTK_PIN_NO(65) | 1)
-#define MT8135_PIN_65_MSDC2_INSI__FUNC_USB_TEST_IO_27 (MTK_PIN_NO(65) | 5)
-#define MT8135_PIN_65_MSDC2_INSI__FUNC_TESTA_OUT3 (MTK_PIN_NO(65) | 7)
-
-#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
-#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_MSDC2_SDWPI (MTK_PIN_NO(66) | 1)
-#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_EINT66 (MTK_PIN_NO(66) | 2)
-#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_USB_TEST_IO_28 (MTK_PIN_NO(66) | 5)
-
-#define MT8135_PIN_67_URXD4__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
-#define MT8135_PIN_67_URXD4__FUNC_URXD4 (MTK_PIN_NO(67) | 1)
-#define MT8135_PIN_67_URXD4__FUNC_EINT89 (MTK_PIN_NO(67) | 2)
-#define MT8135_PIN_67_URXD4__FUNC_URXD1 (MTK_PIN_NO(67) | 3)
-#define MT8135_PIN_67_URXD4__FUNC_UTXD4 (MTK_PIN_NO(67) | 6)
-#define MT8135_PIN_67_URXD4__FUNC_TESTB_OUT10 (MTK_PIN_NO(67) | 7)
-
-#define MT8135_PIN_68_UTXD4__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
-#define MT8135_PIN_68_UTXD4__FUNC_UTXD4 (MTK_PIN_NO(68) | 1)
-#define MT8135_PIN_68_UTXD4__FUNC_EINT88 (MTK_PIN_NO(68) | 2)
-#define MT8135_PIN_68_UTXD4__FUNC_UTXD1 (MTK_PIN_NO(68) | 3)
-#define MT8135_PIN_68_UTXD4__FUNC_URXD4 (MTK_PIN_NO(68) | 6)
-#define MT8135_PIN_68_UTXD4__FUNC_TESTB_OUT11 (MTK_PIN_NO(68) | 7)
-
-#define MT8135_PIN_69_URXD1__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
-#define MT8135_PIN_69_URXD1__FUNC_URXD1 (MTK_PIN_NO(69) | 1)
-#define MT8135_PIN_69_URXD1__FUNC_EINT79 (MTK_PIN_NO(69) | 2)
-#define MT8135_PIN_69_URXD1__FUNC_URXD4 (MTK_PIN_NO(69) | 3)
-#define MT8135_PIN_69_URXD1__FUNC_UTXD1 (MTK_PIN_NO(69) | 6)
-#define MT8135_PIN_69_URXD1__FUNC_TESTB_OUT24 (MTK_PIN_NO(69) | 7)
-
-#define MT8135_PIN_70_UTXD1__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
-#define MT8135_PIN_70_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(70) | 1)
-#define MT8135_PIN_70_UTXD1__FUNC_EINT78 (MTK_PIN_NO(70) | 2)
-#define MT8135_PIN_70_UTXD1__FUNC_UTXD4 (MTK_PIN_NO(70) | 3)
-#define MT8135_PIN_70_UTXD1__FUNC_URXD1 (MTK_PIN_NO(70) | 6)
-#define MT8135_PIN_70_UTXD1__FUNC_TESTB_OUT25 (MTK_PIN_NO(70) | 7)
-
-#define MT8135_PIN_71_UCTS1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
-#define MT8135_PIN_71_UCTS1__FUNC_UCTS1 (MTK_PIN_NO(71) | 1)
-#define MT8135_PIN_71_UCTS1__FUNC_EINT80 (MTK_PIN_NO(71) | 2)
-#define MT8135_PIN_71_UCTS1__FUNC_CLKM0 (MTK_PIN_NO(71) | 5)
-#define MT8135_PIN_71_UCTS1__FUNC_URTS1 (MTK_PIN_NO(71) | 6)
-#define MT8135_PIN_71_UCTS1__FUNC_TESTB_OUT31 (MTK_PIN_NO(71) | 7)
-
-#define MT8135_PIN_72_URTS1__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
-#define MT8135_PIN_72_URTS1__FUNC_URTS1 (MTK_PIN_NO(72) | 1)
-#define MT8135_PIN_72_URTS1__FUNC_EINT81 (MTK_PIN_NO(72) | 2)
-#define MT8135_PIN_72_URTS1__FUNC_CLKM1 (MTK_PIN_NO(72) | 5)
-#define MT8135_PIN_72_URTS1__FUNC_UCTS1 (MTK_PIN_NO(72) | 6)
-#define MT8135_PIN_72_URTS1__FUNC_TESTB_OUT21 (MTK_PIN_NO(72) | 7)
-
-#define MT8135_PIN_73_PWM1__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
-#define MT8135_PIN_73_PWM1__FUNC_PWM1 (MTK_PIN_NO(73) | 1)
-#define MT8135_PIN_73_PWM1__FUNC_EINT73 (MTK_PIN_NO(73) | 2)
-#define MT8135_PIN_73_PWM1__FUNC_USB_DRVVBUS (MTK_PIN_NO(73) | 5)
-#define MT8135_PIN_73_PWM1__FUNC_DISP_PWM (MTK_PIN_NO(73) | 6)
-#define MT8135_PIN_73_PWM1__FUNC_TESTB_OUT8 (MTK_PIN_NO(73) | 7)
-
-#define MT8135_PIN_74_PWM2__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
-#define MT8135_PIN_74_PWM2__FUNC_PWM2 (MTK_PIN_NO(74) | 1)
-#define MT8135_PIN_74_PWM2__FUNC_EINT74 (MTK_PIN_NO(74) | 2)
-#define MT8135_PIN_74_PWM2__FUNC_DPI33_CK (MTK_PIN_NO(74) | 3)
-#define MT8135_PIN_74_PWM2__FUNC_PWM5 (MTK_PIN_NO(74) | 4)
-#define MT8135_PIN_74_PWM2__FUNC_URXD2 (MTK_PIN_NO(74) | 5)
-#define MT8135_PIN_74_PWM2__FUNC_DISP_PWM (MTK_PIN_NO(74) | 6)
-#define MT8135_PIN_74_PWM2__FUNC_TESTB_OUT9 (MTK_PIN_NO(74) | 7)
-
-#define MT8135_PIN_75_PWM3__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
-#define MT8135_PIN_75_PWM3__FUNC_PWM3 (MTK_PIN_NO(75) | 1)
-#define MT8135_PIN_75_PWM3__FUNC_EINT75 (MTK_PIN_NO(75) | 2)
-#define MT8135_PIN_75_PWM3__FUNC_DPI33_D0 (MTK_PIN_NO(75) | 3)
-#define MT8135_PIN_75_PWM3__FUNC_PWM6 (MTK_PIN_NO(75) | 4)
-#define MT8135_PIN_75_PWM3__FUNC_UTXD2 (MTK_PIN_NO(75) | 5)
-#define MT8135_PIN_75_PWM3__FUNC_DISP_PWM (MTK_PIN_NO(75) | 6)
-#define MT8135_PIN_75_PWM3__FUNC_TESTB_OUT12 (MTK_PIN_NO(75) | 7)
-
-#define MT8135_PIN_76_PWM4__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
-#define MT8135_PIN_76_PWM4__FUNC_PWM4 (MTK_PIN_NO(76) | 1)
-#define MT8135_PIN_76_PWM4__FUNC_EINT76 (MTK_PIN_NO(76) | 2)
-#define MT8135_PIN_76_PWM4__FUNC_DPI33_D1 (MTK_PIN_NO(76) | 3)
-#define MT8135_PIN_76_PWM4__FUNC_PWM7 (MTK_PIN_NO(76) | 4)
-#define MT8135_PIN_76_PWM4__FUNC_DISP_PWM (MTK_PIN_NO(76) | 6)
-#define MT8135_PIN_76_PWM4__FUNC_TESTB_OUT13 (MTK_PIN_NO(76) | 7)
-
-#define MT8135_PIN_77_MSDC2_DAT2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
-#define MT8135_PIN_77_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(77) | 1)
-#define MT8135_PIN_77_MSDC2_DAT2__FUNC_EINT63 (MTK_PIN_NO(77) | 2)
-#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DSP2_IMS (MTK_PIN_NO(77) | 4)
-#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DPI33_D6 (MTK_PIN_NO(77) | 6)
-#define MT8135_PIN_77_MSDC2_DAT2__FUNC_TESTA_OUT25 (MTK_PIN_NO(77) | 7)
-
-#define MT8135_PIN_78_MSDC2_DAT3__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
-#define MT8135_PIN_78_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(78) | 1)
-#define MT8135_PIN_78_MSDC2_DAT3__FUNC_EINT64 (MTK_PIN_NO(78) | 2)
-#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DSP2_ID (MTK_PIN_NO(78) | 4)
-#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DPI33_D7 (MTK_PIN_NO(78) | 6)
-#define MT8135_PIN_78_MSDC2_DAT3__FUNC_TESTA_OUT26 (MTK_PIN_NO(78) | 7)
-
-#define MT8135_PIN_79_MSDC2_CMD__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
-#define MT8135_PIN_79_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(79) | 1)
-#define MT8135_PIN_79_MSDC2_CMD__FUNC_EINT60 (MTK_PIN_NO(79) | 2)
-#define MT8135_PIN_79_MSDC2_CMD__FUNC_DSP1_IMS (MTK_PIN_NO(79) | 4)
-#define MT8135_PIN_79_MSDC2_CMD__FUNC_PCM1_WS (MTK_PIN_NO(79) | 5)
-#define MT8135_PIN_79_MSDC2_CMD__FUNC_DPI33_D3 (MTK_PIN_NO(79) | 6)
-#define MT8135_PIN_79_MSDC2_CMD__FUNC_TESTA_OUT0 (MTK_PIN_NO(79) | 7)
-
-#define MT8135_PIN_80_MSDC2_CLK__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
-#define MT8135_PIN_80_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(80) | 1)
-#define MT8135_PIN_80_MSDC2_CLK__FUNC_EINT59 (MTK_PIN_NO(80) | 2)
-#define MT8135_PIN_80_MSDC2_CLK__FUNC_DSP1_ICK (MTK_PIN_NO(80) | 4)
-#define MT8135_PIN_80_MSDC2_CLK__FUNC_PCM1_CK (MTK_PIN_NO(80) | 5)
-#define MT8135_PIN_80_MSDC2_CLK__FUNC_DPI33_D2 (MTK_PIN_NO(80) | 6)
-#define MT8135_PIN_80_MSDC2_CLK__FUNC_TESTA_OUT1 (MTK_PIN_NO(80) | 7)
-
-#define MT8135_PIN_81_MSDC2_DAT1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
-#define MT8135_PIN_81_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(81) | 1)
-#define MT8135_PIN_81_MSDC2_DAT1__FUNC_EINT62 (MTK_PIN_NO(81) | 2)
-#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DSP2_ICK (MTK_PIN_NO(81) | 4)
-#define MT8135_PIN_81_MSDC2_DAT1__FUNC_PCM1_DO (MTK_PIN_NO(81) | 5)
-#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DPI33_D5 (MTK_PIN_NO(81) | 6)
-
-#define MT8135_PIN_82_MSDC2_DAT0__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
-#define MT8135_PIN_82_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(82) | 1)
-#define MT8135_PIN_82_MSDC2_DAT0__FUNC_EINT61 (MTK_PIN_NO(82) | 2)
-#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DSP1_ID (MTK_PIN_NO(82) | 4)
-#define MT8135_PIN_82_MSDC2_DAT0__FUNC_PCM1_DI (MTK_PIN_NO(82) | 5)
-#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DPI33_D4 (MTK_PIN_NO(82) | 6)
-
-#define MT8135_PIN_83_MSDC1_DAT0__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
-#define MT8135_PIN_83_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(83) | 1)
-#define MT8135_PIN_83_MSDC1_DAT0__FUNC_EINT53 (MTK_PIN_NO(83) | 2)
-#define MT8135_PIN_83_MSDC1_DAT0__FUNC_SCL1 (MTK_PIN_NO(83) | 3)
-#define MT8135_PIN_83_MSDC1_DAT0__FUNC_PWM2 (MTK_PIN_NO(83) | 4)
-#define MT8135_PIN_83_MSDC1_DAT0__FUNC_CLKM1 (MTK_PIN_NO(83) | 5)
-#define MT8135_PIN_83_MSDC1_DAT0__FUNC_TESTB_OUT2 (MTK_PIN_NO(83) | 7)
-
-#define MT8135_PIN_84_MSDC1_DAT1__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
-#define MT8135_PIN_84_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(84) | 1)
-#define MT8135_PIN_84_MSDC1_DAT1__FUNC_EINT54 (MTK_PIN_NO(84) | 2)
-#define MT8135_PIN_84_MSDC1_DAT1__FUNC_SDA1 (MTK_PIN_NO(84) | 3)
-#define MT8135_PIN_84_MSDC1_DAT1__FUNC_PWM3 (MTK_PIN_NO(84) | 4)
-#define MT8135_PIN_84_MSDC1_DAT1__FUNC_CLKM2 (MTK_PIN_NO(84) | 5)
-#define MT8135_PIN_84_MSDC1_DAT1__FUNC_TESTB_OUT3 (MTK_PIN_NO(84) | 7)
-
-#define MT8135_PIN_85_MSDC1_CMD__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
-#define MT8135_PIN_85_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(85) | 1)
-#define MT8135_PIN_85_MSDC1_CMD__FUNC_EINT52 (MTK_PIN_NO(85) | 2)
-#define MT8135_PIN_85_MSDC1_CMD__FUNC_SDA0 (MTK_PIN_NO(85) | 3)
-#define MT8135_PIN_85_MSDC1_CMD__FUNC_PWM1 (MTK_PIN_NO(85) | 4)
-#define MT8135_PIN_85_MSDC1_CMD__FUNC_CLKM0 (MTK_PIN_NO(85) | 5)
-#define MT8135_PIN_85_MSDC1_CMD__FUNC_TESTB_OUT1 (MTK_PIN_NO(85) | 7)
-
-#define MT8135_PIN_86_MSDC1_CLK__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
-#define MT8135_PIN_86_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(86) | 1)
-#define MT8135_PIN_86_MSDC1_CLK__FUNC_EINT51 (MTK_PIN_NO(86) | 2)
-#define MT8135_PIN_86_MSDC1_CLK__FUNC_SCL0 (MTK_PIN_NO(86) | 3)
-#define MT8135_PIN_86_MSDC1_CLK__FUNC_DISP_PWM (MTK_PIN_NO(86) | 4)
-#define MT8135_PIN_86_MSDC1_CLK__FUNC_TESTB_OUT0 (MTK_PIN_NO(86) | 7)
-
-#define MT8135_PIN_87_MSDC1_DAT2__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
-#define MT8135_PIN_87_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(87) | 1)
-#define MT8135_PIN_87_MSDC1_DAT2__FUNC_EINT55 (MTK_PIN_NO(87) | 2)
-#define MT8135_PIN_87_MSDC1_DAT2__FUNC_SCL4 (MTK_PIN_NO(87) | 3)
-#define MT8135_PIN_87_MSDC1_DAT2__FUNC_PWM4 (MTK_PIN_NO(87) | 4)
-#define MT8135_PIN_87_MSDC1_DAT2__FUNC_CLKM3 (MTK_PIN_NO(87) | 5)
-#define MT8135_PIN_87_MSDC1_DAT2__FUNC_TESTB_OUT4 (MTK_PIN_NO(87) | 7)
-
-#define MT8135_PIN_88_MSDC1_DAT3__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
-#define MT8135_PIN_88_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(88) | 1)
-#define MT8135_PIN_88_MSDC1_DAT3__FUNC_EINT56 (MTK_PIN_NO(88) | 2)
-#define MT8135_PIN_88_MSDC1_DAT3__FUNC_SDA4 (MTK_PIN_NO(88) | 3)
-#define MT8135_PIN_88_MSDC1_DAT3__FUNC_PWM5 (MTK_PIN_NO(88) | 4)
-#define MT8135_PIN_88_MSDC1_DAT3__FUNC_CLKM4 (MTK_PIN_NO(88) | 5)
-#define MT8135_PIN_88_MSDC1_DAT3__FUNC_TESTB_OUT5 (MTK_PIN_NO(88) | 7)
-
-#define MT8135_PIN_89_MSDC4_DAT0__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
-#define MT8135_PIN_89_MSDC4_DAT0__FUNC_MSDC4_DAT0 (MTK_PIN_NO(89) | 1)
-#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EINT133 (MTK_PIN_NO(89) | 2)
-#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(89) | 4)
-#define MT8135_PIN_89_MSDC4_DAT0__FUNC_USB_DRVVBUS (MTK_PIN_NO(89) | 5)
-#define MT8135_PIN_89_MSDC4_DAT0__FUNC_A_FUNC_DIN_9 (MTK_PIN_NO(89) | 6)
-#define MT8135_PIN_89_MSDC4_DAT0__FUNC_LPTE (MTK_PIN_NO(89) | 7)
-
-#define MT8135_PIN_90_MSDC4_DAT1__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
-#define MT8135_PIN_90_MSDC4_DAT1__FUNC_MSDC4_DAT1 (MTK_PIN_NO(90) | 1)
-#define MT8135_PIN_90_MSDC4_DAT1__FUNC_EINT134 (MTK_PIN_NO(90) | 2)
-#define MT8135_PIN_90_MSDC4_DAT1__FUNC_A_FUNC_DIN_10 (MTK_PIN_NO(90) | 6)
-#define MT8135_PIN_90_MSDC4_DAT1__FUNC_LRSTB_1X (MTK_PIN_NO(90) | 7)
-
-#define MT8135_PIN_91_MSDC4_DAT5__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
-#define MT8135_PIN_91_MSDC4_DAT5__FUNC_MSDC4_DAT5 (MTK_PIN_NO(91) | 1)
-#define MT8135_PIN_91_MSDC4_DAT5__FUNC_EINT136 (MTK_PIN_NO(91) | 2)
-#define MT8135_PIN_91_MSDC4_DAT5__FUNC_I2SIN_WS (MTK_PIN_NO(91) | 3)
-#define MT8135_PIN_91_MSDC4_DAT5__FUNC_DAC_WS (MTK_PIN_NO(91) | 4)
-#define MT8135_PIN_91_MSDC4_DAT5__FUNC_PCM1_WS (MTK_PIN_NO(91) | 5)
-#define MT8135_PIN_91_MSDC4_DAT5__FUNC_A_FUNC_DIN_11 (MTK_PIN_NO(91) | 6)
-#define MT8135_PIN_91_MSDC4_DAT5__FUNC_SPI1_CSN (MTK_PIN_NO(91) | 7)
-
-#define MT8135_PIN_92_MSDC4_DAT6__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
-#define MT8135_PIN_92_MSDC4_DAT6__FUNC_MSDC4_DAT6 (MTK_PIN_NO(92) | 1)
-#define MT8135_PIN_92_MSDC4_DAT6__FUNC_EINT137 (MTK_PIN_NO(92) | 2)
-#define MT8135_PIN_92_MSDC4_DAT6__FUNC_I2SOUT_DAT (MTK_PIN_NO(92) | 3)
-#define MT8135_PIN_92_MSDC4_DAT6__FUNC_DAC_DAT_OUT (MTK_PIN_NO(92) | 4)
-#define MT8135_PIN_92_MSDC4_DAT6__FUNC_PCM1_DO (MTK_PIN_NO(92) | 5)
-#define MT8135_PIN_92_MSDC4_DAT6__FUNC_A_FUNC_DIN_12 (MTK_PIN_NO(92) | 6)
-#define MT8135_PIN_92_MSDC4_DAT6__FUNC_SPI1_MO (MTK_PIN_NO(92) | 7)
-
-#define MT8135_PIN_93_MSDC4_DAT7__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
-#define MT8135_PIN_93_MSDC4_DAT7__FUNC_MSDC4_DAT7 (MTK_PIN_NO(93) | 1)
-#define MT8135_PIN_93_MSDC4_DAT7__FUNC_EINT138 (MTK_PIN_NO(93) | 2)
-#define MT8135_PIN_93_MSDC4_DAT7__FUNC_I2SIN_DAT (MTK_PIN_NO(93) | 3)
-#define MT8135_PIN_93_MSDC4_DAT7__FUNC_PCM1_DI (MTK_PIN_NO(93) | 5)
-#define MT8135_PIN_93_MSDC4_DAT7__FUNC_A_FUNC_DIN_13 (MTK_PIN_NO(93) | 6)
-#define MT8135_PIN_93_MSDC4_DAT7__FUNC_SPI1_MI (MTK_PIN_NO(93) | 7)
-
-#define MT8135_PIN_94_MSDC4_DAT4__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
-#define MT8135_PIN_94_MSDC4_DAT4__FUNC_MSDC4_DAT4 (MTK_PIN_NO(94) | 1)
-#define MT8135_PIN_94_MSDC4_DAT4__FUNC_EINT135 (MTK_PIN_NO(94) | 2)
-#define MT8135_PIN_94_MSDC4_DAT4__FUNC_I2SIN_CK (MTK_PIN_NO(94) | 3)
-#define MT8135_PIN_94_MSDC4_DAT4__FUNC_DAC_CK (MTK_PIN_NO(94) | 4)
-#define MT8135_PIN_94_MSDC4_DAT4__FUNC_PCM1_CK (MTK_PIN_NO(94) | 5)
-#define MT8135_PIN_94_MSDC4_DAT4__FUNC_A_FUNC_DIN_14 (MTK_PIN_NO(94) | 6)
-#define MT8135_PIN_94_MSDC4_DAT4__FUNC_SPI1_CLK (MTK_PIN_NO(94) | 7)
-
-#define MT8135_PIN_95_MSDC4_DAT2__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
-#define MT8135_PIN_95_MSDC4_DAT2__FUNC_MSDC4_DAT2 (MTK_PIN_NO(95) | 1)
-#define MT8135_PIN_95_MSDC4_DAT2__FUNC_EINT131 (MTK_PIN_NO(95) | 2)
-#define MT8135_PIN_95_MSDC4_DAT2__FUNC_I2SIN_WS (MTK_PIN_NO(95) | 3)
-#define MT8135_PIN_95_MSDC4_DAT2__FUNC_CM2PDN_2X (MTK_PIN_NO(95) | 4)
-#define MT8135_PIN_95_MSDC4_DAT2__FUNC_DAC_WS (MTK_PIN_NO(95) | 5)
-#define MT8135_PIN_95_MSDC4_DAT2__FUNC_PCM1_WS (MTK_PIN_NO(95) | 6)
-#define MT8135_PIN_95_MSDC4_DAT2__FUNC_LSCE0B_1X (MTK_PIN_NO(95) | 7)
-
-#define MT8135_PIN_96_MSDC4_CLK__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
-#define MT8135_PIN_96_MSDC4_CLK__FUNC_MSDC4_CLK (MTK_PIN_NO(96) | 1)
-#define MT8135_PIN_96_MSDC4_CLK__FUNC_EINT129 (MTK_PIN_NO(96) | 2)
-#define MT8135_PIN_96_MSDC4_CLK__FUNC_DPI1_CK_2X (MTK_PIN_NO(96) | 3)
-#define MT8135_PIN_96_MSDC4_CLK__FUNC_CM2PCLK_2X (MTK_PIN_NO(96) | 4)
-#define MT8135_PIN_96_MSDC4_CLK__FUNC_PWM4 (MTK_PIN_NO(96) | 5)
-#define MT8135_PIN_96_MSDC4_CLK__FUNC_PCM1_DI (MTK_PIN_NO(96) | 6)
-#define MT8135_PIN_96_MSDC4_CLK__FUNC_LSCK_1X (MTK_PIN_NO(96) | 7)
-
-#define MT8135_PIN_97_MSDC4_DAT3__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
-#define MT8135_PIN_97_MSDC4_DAT3__FUNC_MSDC4_DAT3 (MTK_PIN_NO(97) | 1)
-#define MT8135_PIN_97_MSDC4_DAT3__FUNC_EINT132 (MTK_PIN_NO(97) | 2)
-#define MT8135_PIN_97_MSDC4_DAT3__FUNC_I2SOUT_DAT (MTK_PIN_NO(97) | 3)
-#define MT8135_PIN_97_MSDC4_DAT3__FUNC_CM2RST_2X (MTK_PIN_NO(97) | 4)
-#define MT8135_PIN_97_MSDC4_DAT3__FUNC_DAC_DAT_OUT (MTK_PIN_NO(97) | 5)
-#define MT8135_PIN_97_MSDC4_DAT3__FUNC_PCM1_DO (MTK_PIN_NO(97) | 6)
-#define MT8135_PIN_97_MSDC4_DAT3__FUNC_LSCE1B_1X (MTK_PIN_NO(97) | 7)
-
-#define MT8135_PIN_98_MSDC4_CMD__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
-#define MT8135_PIN_98_MSDC4_CMD__FUNC_MSDC4_CMD (MTK_PIN_NO(98) | 1)
-#define MT8135_PIN_98_MSDC4_CMD__FUNC_EINT128 (MTK_PIN_NO(98) | 2)
-#define MT8135_PIN_98_MSDC4_CMD__FUNC_DPI1_DE_2X (MTK_PIN_NO(98) | 3)
-#define MT8135_PIN_98_MSDC4_CMD__FUNC_PWM3 (MTK_PIN_NO(98) | 5)
-#define MT8135_PIN_98_MSDC4_CMD__FUNC_LSDA_1X (MTK_PIN_NO(98) | 7)
-
-#define MT8135_PIN_99_MSDC4_RSTB__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
-#define MT8135_PIN_99_MSDC4_RSTB__FUNC_MSDC4_RSTB (MTK_PIN_NO(99) | 1)
-#define MT8135_PIN_99_MSDC4_RSTB__FUNC_EINT130 (MTK_PIN_NO(99) | 2)
-#define MT8135_PIN_99_MSDC4_RSTB__FUNC_I2SIN_CK (MTK_PIN_NO(99) | 3)
-#define MT8135_PIN_99_MSDC4_RSTB__FUNC_CM2MCLK_2X (MTK_PIN_NO(99) | 4)
-#define MT8135_PIN_99_MSDC4_RSTB__FUNC_DAC_CK (MTK_PIN_NO(99) | 5)
-#define MT8135_PIN_99_MSDC4_RSTB__FUNC_PCM1_CK (MTK_PIN_NO(99) | 6)
-#define MT8135_PIN_99_MSDC4_RSTB__FUNC_LSA0_1X (MTK_PIN_NO(99) | 7)
-
-#define MT8135_PIN_100_SDA0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
-#define MT8135_PIN_100_SDA0__FUNC_SDA0 (MTK_PIN_NO(100) | 1)
-#define MT8135_PIN_100_SDA0__FUNC_EINT91 (MTK_PIN_NO(100) | 2)
-#define MT8135_PIN_100_SDA0__FUNC_CLKM1 (MTK_PIN_NO(100) | 3)
-#define MT8135_PIN_100_SDA0__FUNC_PWM1 (MTK_PIN_NO(100) | 4)
-#define MT8135_PIN_100_SDA0__FUNC_A_FUNC_DIN_15 (MTK_PIN_NO(100) | 7)
-
-#define MT8135_PIN_101_SCL0__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
-#define MT8135_PIN_101_SCL0__FUNC_SCL0 (MTK_PIN_NO(101) | 1)
-#define MT8135_PIN_101_SCL0__FUNC_EINT90 (MTK_PIN_NO(101) | 2)
-#define MT8135_PIN_101_SCL0__FUNC_CLKM0 (MTK_PIN_NO(101) | 3)
-#define MT8135_PIN_101_SCL0__FUNC_DISP_PWM (MTK_PIN_NO(101) | 4)
-#define MT8135_PIN_101_SCL0__FUNC_A_FUNC_DIN_16 (MTK_PIN_NO(101) | 7)
-
-#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
-#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_EINT10 (MTK_PIN_NO(102) | 1)
-#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_USB_TEST_IO_16 (MTK_PIN_NO(102) | 5)
-#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_TESTB_OUT16 (MTK_PIN_NO(102) | 6)
-#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_A_FUNC_DIN_17 (MTK_PIN_NO(102) | 7)
-
-#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
-#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_EINT11 (MTK_PIN_NO(103) | 1)
-#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_USB_TEST_IO_17 (MTK_PIN_NO(103) | 5)
-#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_TESTB_OUT17 (MTK_PIN_NO(103) | 6)
-#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_A_FUNC_DIN_18 (MTK_PIN_NO(103) | 7)
-
-#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
-#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_EINT16 (MTK_PIN_NO(104) | 1)
-#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_USB_TEST_IO_18 (MTK_PIN_NO(104) | 5)
-#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_TESTB_OUT18 (MTK_PIN_NO(104) | 6)
-#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_A_FUNC_DIN_19 (MTK_PIN_NO(104) | 7)
-
-#define MT8135_PIN_105_I2S_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
-#define MT8135_PIN_105_I2S_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(105) | 1)
-#define MT8135_PIN_105_I2S_CLK__FUNC_EINT10 (MTK_PIN_NO(105) | 2)
-#define MT8135_PIN_105_I2S_CLK__FUNC_DAC_CK (MTK_PIN_NO(105) | 3)
-#define MT8135_PIN_105_I2S_CLK__FUNC_PCM1_CK (MTK_PIN_NO(105) | 4)
-#define MT8135_PIN_105_I2S_CLK__FUNC_USB_TEST_IO_19 (MTK_PIN_NO(105) | 5)
-#define MT8135_PIN_105_I2S_CLK__FUNC_TESTB_OUT19 (MTK_PIN_NO(105) | 6)
-#define MT8135_PIN_105_I2S_CLK__FUNC_A_FUNC_DIN_20 (MTK_PIN_NO(105) | 7)
-
-#define MT8135_PIN_106_I2S_WS__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
-#define MT8135_PIN_106_I2S_WS__FUNC_I2SIN_WS (MTK_PIN_NO(106) | 1)
-#define MT8135_PIN_106_I2S_WS__FUNC_EINT13 (MTK_PIN_NO(106) | 2)
-#define MT8135_PIN_106_I2S_WS__FUNC_DAC_WS (MTK_PIN_NO(106) | 3)
-#define MT8135_PIN_106_I2S_WS__FUNC_PCM1_WS (MTK_PIN_NO(106) | 4)
-#define MT8135_PIN_106_I2S_WS__FUNC_USB_TEST_IO_20 (MTK_PIN_NO(106) | 5)
-#define MT8135_PIN_106_I2S_WS__FUNC_TESTB_OUT20 (MTK_PIN_NO(106) | 6)
-#define MT8135_PIN_106_I2S_WS__FUNC_A_FUNC_DIN_21 (MTK_PIN_NO(106) | 7)
-
-#define MT8135_PIN_107_I2S_DATA_IN__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
-#define MT8135_PIN_107_I2S_DATA_IN__FUNC_I2SIN_DAT (MTK_PIN_NO(107) | 1)
-#define MT8135_PIN_107_I2S_DATA_IN__FUNC_EINT11 (MTK_PIN_NO(107) | 2)
-#define MT8135_PIN_107_I2S_DATA_IN__FUNC_PCM1_DI (MTK_PIN_NO(107) | 4)
-#define MT8135_PIN_107_I2S_DATA_IN__FUNC_USB_TEST_IO_21 (MTK_PIN_NO(107) | 5)
-#define MT8135_PIN_107_I2S_DATA_IN__FUNC_TESTB_OUT22 (MTK_PIN_NO(107) | 6)
-#define MT8135_PIN_107_I2S_DATA_IN__FUNC_A_FUNC_DIN_22 (MTK_PIN_NO(107) | 7)
-
-#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
-#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_I2SOUT_DAT (MTK_PIN_NO(108) | 1)
-#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_EINT12 (MTK_PIN_NO(108) | 2)
-#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(108) | 3)
-#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_PCM1_DO (MTK_PIN_NO(108) | 4)
-#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_USB_TEST_IO_22 (MTK_PIN_NO(108) | 5)
-#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_TESTB_OUT23 (MTK_PIN_NO(108) | 6)
-#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_A_FUNC_DIN_23 (MTK_PIN_NO(108) | 7)
-
-#define MT8135_PIN_109_EINT5__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
-#define MT8135_PIN_109_EINT5__FUNC_EINT5 (MTK_PIN_NO(109) | 1)
-#define MT8135_PIN_109_EINT5__FUNC_PWM5 (MTK_PIN_NO(109) | 2)
-#define MT8135_PIN_109_EINT5__FUNC_CLKM3 (MTK_PIN_NO(109) | 3)
-#define MT8135_PIN_109_EINT5__FUNC_GPU_JTRSTB (MTK_PIN_NO(109) | 4)
-#define MT8135_PIN_109_EINT5__FUNC_USB_TEST_IO_23 (MTK_PIN_NO(109) | 5)
-#define MT8135_PIN_109_EINT5__FUNC_TESTB_OUT26 (MTK_PIN_NO(109) | 6)
-#define MT8135_PIN_109_EINT5__FUNC_A_FUNC_DIN_24 (MTK_PIN_NO(109) | 7)
-
-#define MT8135_PIN_110_EINT6__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
-#define MT8135_PIN_110_EINT6__FUNC_EINT6 (MTK_PIN_NO(110) | 1)
-#define MT8135_PIN_110_EINT6__FUNC_PWM6 (MTK_PIN_NO(110) | 2)
-#define MT8135_PIN_110_EINT6__FUNC_CLKM4 (MTK_PIN_NO(110) | 3)
-#define MT8135_PIN_110_EINT6__FUNC_GPU_JTMS (MTK_PIN_NO(110) | 4)
-#define MT8135_PIN_110_EINT6__FUNC_USB_TEST_IO_24 (MTK_PIN_NO(110) | 5)
-#define MT8135_PIN_110_EINT6__FUNC_TESTB_OUT27 (MTK_PIN_NO(110) | 6)
-#define MT8135_PIN_110_EINT6__FUNC_A_FUNC_DIN_25 (MTK_PIN_NO(110) | 7)
-
-#define MT8135_PIN_111_EINT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
-#define MT8135_PIN_111_EINT7__FUNC_EINT7 (MTK_PIN_NO(111) | 1)
-#define MT8135_PIN_111_EINT7__FUNC_PWM7 (MTK_PIN_NO(111) | 2)
-#define MT8135_PIN_111_EINT7__FUNC_CLKM5 (MTK_PIN_NO(111) | 3)
-#define MT8135_PIN_111_EINT7__FUNC_GPU_JTDO (MTK_PIN_NO(111) | 4)
-#define MT8135_PIN_111_EINT7__FUNC_USB_TEST_IO_25 (MTK_PIN_NO(111) | 5)
-#define MT8135_PIN_111_EINT7__FUNC_TESTB_OUT28 (MTK_PIN_NO(111) | 6)
-#define MT8135_PIN_111_EINT7__FUNC_A_FUNC_DIN_26 (MTK_PIN_NO(111) | 7)
-
-#define MT8135_PIN_112_EINT8__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
-#define MT8135_PIN_112_EINT8__FUNC_EINT8 (MTK_PIN_NO(112) | 1)
-#define MT8135_PIN_112_EINT8__FUNC_DISP_PWM (MTK_PIN_NO(112) | 2)
-#define MT8135_PIN_112_EINT8__FUNC_CLKM6 (MTK_PIN_NO(112) | 3)
-#define MT8135_PIN_112_EINT8__FUNC_GPU_JTDI (MTK_PIN_NO(112) | 4)
-#define MT8135_PIN_112_EINT8__FUNC_USB_TEST_IO_26 (MTK_PIN_NO(112) | 5)
-#define MT8135_PIN_112_EINT8__FUNC_TESTB_OUT29 (MTK_PIN_NO(112) | 6)
-#define MT8135_PIN_112_EINT8__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(112) | 7)
-
-#define MT8135_PIN_113_EINT9__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
-#define MT8135_PIN_113_EINT9__FUNC_EINT9 (MTK_PIN_NO(113) | 1)
-#define MT8135_PIN_113_EINT9__FUNC_GPU_JTCK (MTK_PIN_NO(113) | 4)
-#define MT8135_PIN_113_EINT9__FUNC_USB_DRVVBUS (MTK_PIN_NO(113) | 5)
-#define MT8135_PIN_113_EINT9__FUNC_TESTB_OUT30 (MTK_PIN_NO(113) | 6)
-#define MT8135_PIN_113_EINT9__FUNC_A_FUNC_DIN_27 (MTK_PIN_NO(113) | 7)
-
-#define MT8135_PIN_114_LPCE1B__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
-#define MT8135_PIN_114_LPCE1B__FUNC_LPCE1B (MTK_PIN_NO(114) | 1)
-#define MT8135_PIN_114_LPCE1B__FUNC_EINT127 (MTK_PIN_NO(114) | 2)
-#define MT8135_PIN_114_LPCE1B__FUNC_PWM2 (MTK_PIN_NO(114) | 5)
-#define MT8135_PIN_114_LPCE1B__FUNC_TESTB_OUT14 (MTK_PIN_NO(114) | 6)
-#define MT8135_PIN_114_LPCE1B__FUNC_A_FUNC_DIN_28 (MTK_PIN_NO(114) | 7)
-
-#define MT8135_PIN_115_LPCE0B__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
-#define MT8135_PIN_115_LPCE0B__FUNC_LPCE0B (MTK_PIN_NO(115) | 1)
-#define MT8135_PIN_115_LPCE0B__FUNC_EINT126 (MTK_PIN_NO(115) | 2)
-#define MT8135_PIN_115_LPCE0B__FUNC_PWM1 (MTK_PIN_NO(115) | 5)
-#define MT8135_PIN_115_LPCE0B__FUNC_TESTB_OUT15 (MTK_PIN_NO(115) | 6)
-#define MT8135_PIN_115_LPCE0B__FUNC_A_FUNC_DIN_29 (MTK_PIN_NO(115) | 7)
-
-#define MT8135_PIN_116_DISP_PWM__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
-#define MT8135_PIN_116_DISP_PWM__FUNC_DISP_PWM (MTK_PIN_NO(116) | 1)
-#define MT8135_PIN_116_DISP_PWM__FUNC_EINT77 (MTK_PIN_NO(116) | 2)
-#define MT8135_PIN_116_DISP_PWM__FUNC_LSDI (MTK_PIN_NO(116) | 3)
-#define MT8135_PIN_116_DISP_PWM__FUNC_PWM1 (MTK_PIN_NO(116) | 4)
-#define MT8135_PIN_116_DISP_PWM__FUNC_PWM2 (MTK_PIN_NO(116) | 5)
-#define MT8135_PIN_116_DISP_PWM__FUNC_PWM3 (MTK_PIN_NO(116) | 7)
-
-#define MT8135_PIN_117_EINT1__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
-#define MT8135_PIN_117_EINT1__FUNC_EINT1 (MTK_PIN_NO(117) | 1)
-#define MT8135_PIN_117_EINT1__FUNC_PWM2 (MTK_PIN_NO(117) | 2)
-#define MT8135_PIN_117_EINT1__FUNC_CLKM1 (MTK_PIN_NO(117) | 3)
-#define MT8135_PIN_117_EINT1__FUNC_USB_TEST_IO_13 (MTK_PIN_NO(117) | 5)
-#define MT8135_PIN_117_EINT1__FUNC_USB_SDA (MTK_PIN_NO(117) | 7)
-
-#define MT8135_PIN_118_EINT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
-#define MT8135_PIN_118_EINT2__FUNC_EINT2 (MTK_PIN_NO(118) | 1)
-#define MT8135_PIN_118_EINT2__FUNC_PWM3 (MTK_PIN_NO(118) | 2)
-#define MT8135_PIN_118_EINT2__FUNC_CLKM2 (MTK_PIN_NO(118) | 3)
-#define MT8135_PIN_118_EINT2__FUNC_USB_TEST_IO_14 (MTK_PIN_NO(118) | 5)
-#define MT8135_PIN_118_EINT2__FUNC_SRCLKENAI2 (MTK_PIN_NO(118) | 6)
-#define MT8135_PIN_118_EINT2__FUNC_A_FUNC_DIN_30 (MTK_PIN_NO(118) | 7)
-
-#define MT8135_PIN_119_EINT3__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
-#define MT8135_PIN_119_EINT3__FUNC_EINT3 (MTK_PIN_NO(119) | 1)
-#define MT8135_PIN_119_EINT3__FUNC_USB_TEST_IO_15 (MTK_PIN_NO(119) | 5)
-#define MT8135_PIN_119_EINT3__FUNC_SRCLKENAI1 (MTK_PIN_NO(119) | 6)
-#define MT8135_PIN_119_EINT3__FUNC_EXT_26M_CK (MTK_PIN_NO(119) | 7)
-
-#define MT8135_PIN_120_EINT4__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
-#define MT8135_PIN_120_EINT4__FUNC_EINT4 (MTK_PIN_NO(120) | 1)
-#define MT8135_PIN_120_EINT4__FUNC_PWM4 (MTK_PIN_NO(120) | 2)
-#define MT8135_PIN_120_EINT4__FUNC_USB_DRVVBUS (MTK_PIN_NO(120) | 5)
-#define MT8135_PIN_120_EINT4__FUNC_A_FUNC_DIN_31 (MTK_PIN_NO(120) | 7)
-
-#define MT8135_PIN_121_DPIDE__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
-#define MT8135_PIN_121_DPIDE__FUNC_DPI0_DE (MTK_PIN_NO(121) | 1)
-#define MT8135_PIN_121_DPIDE__FUNC_EINT100 (MTK_PIN_NO(121) | 2)
-#define MT8135_PIN_121_DPIDE__FUNC_I2SOUT_DAT (MTK_PIN_NO(121) | 3)
-#define MT8135_PIN_121_DPIDE__FUNC_DAC_DAT_OUT (MTK_PIN_NO(121) | 4)
-#define MT8135_PIN_121_DPIDE__FUNC_PCM1_DO (MTK_PIN_NO(121) | 5)
-#define MT8135_PIN_121_DPIDE__FUNC_IRDA_TXD (MTK_PIN_NO(121) | 6)
-
-#define MT8135_PIN_122_DPICK__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
-#define MT8135_PIN_122_DPICK__FUNC_DPI0_CK (MTK_PIN_NO(122) | 1)
-#define MT8135_PIN_122_DPICK__FUNC_EINT101 (MTK_PIN_NO(122) | 2)
-#define MT8135_PIN_122_DPICK__FUNC_I2SIN_DAT (MTK_PIN_NO(122) | 3)
-#define MT8135_PIN_122_DPICK__FUNC_PCM1_DI (MTK_PIN_NO(122) | 5)
-#define MT8135_PIN_122_DPICK__FUNC_IRDA_PDN (MTK_PIN_NO(122) | 6)
-
-#define MT8135_PIN_123_DPIG4__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
-#define MT8135_PIN_123_DPIG4__FUNC_DPI0_G4 (MTK_PIN_NO(123) | 1)
-#define MT8135_PIN_123_DPIG4__FUNC_EINT114 (MTK_PIN_NO(123) | 2)
-#define MT8135_PIN_123_DPIG4__FUNC_CM2DAT_2X_0 (MTK_PIN_NO(123) | 4)
-#define MT8135_PIN_123_DPIG4__FUNC_DSP2_ID (MTK_PIN_NO(123) | 5)
-
-#define MT8135_PIN_124_DPIG5__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
-#define MT8135_PIN_124_DPIG5__FUNC_DPI0_G5 (MTK_PIN_NO(124) | 1)
-#define MT8135_PIN_124_DPIG5__FUNC_EINT115 (MTK_PIN_NO(124) | 2)
-#define MT8135_PIN_124_DPIG5__FUNC_CM2DAT_2X_1 (MTK_PIN_NO(124) | 4)
-#define MT8135_PIN_124_DPIG5__FUNC_DSP2_ICK (MTK_PIN_NO(124) | 5)
-
-#define MT8135_PIN_125_DPIR3__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
-#define MT8135_PIN_125_DPIR3__FUNC_DPI0_R3 (MTK_PIN_NO(125) | 1)
-#define MT8135_PIN_125_DPIR3__FUNC_EINT121 (MTK_PIN_NO(125) | 2)
-#define MT8135_PIN_125_DPIR3__FUNC_CM2DAT_2X_7 (MTK_PIN_NO(125) | 4)
-
-#define MT8135_PIN_126_DPIG1__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
-#define MT8135_PIN_126_DPIG1__FUNC_DPI0_G1 (MTK_PIN_NO(126) | 1)
-#define MT8135_PIN_126_DPIG1__FUNC_EINT111 (MTK_PIN_NO(126) | 2)
-#define MT8135_PIN_126_DPIG1__FUNC_DSP1_ICK (MTK_PIN_NO(126) | 5)
-
-#define MT8135_PIN_127_DPIVSYNC__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
-#define MT8135_PIN_127_DPIVSYNC__FUNC_DPI0_VSYNC (MTK_PIN_NO(127) | 1)
-#define MT8135_PIN_127_DPIVSYNC__FUNC_EINT98 (MTK_PIN_NO(127) | 2)
-#define MT8135_PIN_127_DPIVSYNC__FUNC_I2SIN_CK (MTK_PIN_NO(127) | 3)
-#define MT8135_PIN_127_DPIVSYNC__FUNC_DAC_CK (MTK_PIN_NO(127) | 4)
-#define MT8135_PIN_127_DPIVSYNC__FUNC_PCM1_CK (MTK_PIN_NO(127) | 5)
-
-#define MT8135_PIN_128_DPIHSYNC__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
-#define MT8135_PIN_128_DPIHSYNC__FUNC_DPI0_HSYNC (MTK_PIN_NO(128) | 1)
-#define MT8135_PIN_128_DPIHSYNC__FUNC_EINT99 (MTK_PIN_NO(128) | 2)
-#define MT8135_PIN_128_DPIHSYNC__FUNC_I2SIN_WS (MTK_PIN_NO(128) | 3)
-#define MT8135_PIN_128_DPIHSYNC__FUNC_DAC_WS (MTK_PIN_NO(128) | 4)
-#define MT8135_PIN_128_DPIHSYNC__FUNC_PCM1_WS (MTK_PIN_NO(128) | 5)
-#define MT8135_PIN_128_DPIHSYNC__FUNC_IRDA_RXD (MTK_PIN_NO(128) | 6)
-
-#define MT8135_PIN_129_DPIB0__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
-#define MT8135_PIN_129_DPIB0__FUNC_DPI0_B0 (MTK_PIN_NO(129) | 1)
-#define MT8135_PIN_129_DPIB0__FUNC_EINT102 (MTK_PIN_NO(129) | 2)
-#define MT8135_PIN_129_DPIB0__FUNC_SCL0 (MTK_PIN_NO(129) | 4)
-#define MT8135_PIN_129_DPIB0__FUNC_DISP_PWM (MTK_PIN_NO(129) | 5)
-
-#define MT8135_PIN_130_DPIB1__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
-#define MT8135_PIN_130_DPIB1__FUNC_DPI0_B1 (MTK_PIN_NO(130) | 1)
-#define MT8135_PIN_130_DPIB1__FUNC_EINT103 (MTK_PIN_NO(130) | 2)
-#define MT8135_PIN_130_DPIB1__FUNC_CLKM0 (MTK_PIN_NO(130) | 3)
-#define MT8135_PIN_130_DPIB1__FUNC_SDA0 (MTK_PIN_NO(130) | 4)
-#define MT8135_PIN_130_DPIB1__FUNC_PWM1 (MTK_PIN_NO(130) | 5)
-
-#define MT8135_PIN_131_DPIB2__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
-#define MT8135_PIN_131_DPIB2__FUNC_DPI0_B2 (MTK_PIN_NO(131) | 1)
-#define MT8135_PIN_131_DPIB2__FUNC_EINT104 (MTK_PIN_NO(131) | 2)
-#define MT8135_PIN_131_DPIB2__FUNC_CLKM1 (MTK_PIN_NO(131) | 3)
-#define MT8135_PIN_131_DPIB2__FUNC_SCL1 (MTK_PIN_NO(131) | 4)
-#define MT8135_PIN_131_DPIB2__FUNC_PWM2 (MTK_PIN_NO(131) | 5)
-
-#define MT8135_PIN_132_DPIB3__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
-#define MT8135_PIN_132_DPIB3__FUNC_DPI0_B3 (MTK_PIN_NO(132) | 1)
-#define MT8135_PIN_132_DPIB3__FUNC_EINT105 (MTK_PIN_NO(132) | 2)
-#define MT8135_PIN_132_DPIB3__FUNC_CLKM2 (MTK_PIN_NO(132) | 3)
-#define MT8135_PIN_132_DPIB3__FUNC_SDA1 (MTK_PIN_NO(132) | 4)
-#define MT8135_PIN_132_DPIB3__FUNC_PWM3 (MTK_PIN_NO(132) | 5)
-
-#define MT8135_PIN_133_DPIB4__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
-#define MT8135_PIN_133_DPIB4__FUNC_DPI0_B4 (MTK_PIN_NO(133) | 1)
-#define MT8135_PIN_133_DPIB4__FUNC_EINT106 (MTK_PIN_NO(133) | 2)
-#define MT8135_PIN_133_DPIB4__FUNC_CLKM3 (MTK_PIN_NO(133) | 3)
-#define MT8135_PIN_133_DPIB4__FUNC_SCL2 (MTK_PIN_NO(133) | 4)
-#define MT8135_PIN_133_DPIB4__FUNC_PWM4 (MTK_PIN_NO(133) | 5)
-
-#define MT8135_PIN_134_DPIB5__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
-#define MT8135_PIN_134_DPIB5__FUNC_DPI0_B5 (MTK_PIN_NO(134) | 1)
-#define MT8135_PIN_134_DPIB5__FUNC_EINT107 (MTK_PIN_NO(134) | 2)
-#define MT8135_PIN_134_DPIB5__FUNC_CLKM4 (MTK_PIN_NO(134) | 3)
-#define MT8135_PIN_134_DPIB5__FUNC_SDA2 (MTK_PIN_NO(134) | 4)
-#define MT8135_PIN_134_DPIB5__FUNC_PWM5 (MTK_PIN_NO(134) | 5)
-
-#define MT8135_PIN_135_DPIB6__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
-#define MT8135_PIN_135_DPIB6__FUNC_DPI0_B6 (MTK_PIN_NO(135) | 1)
-#define MT8135_PIN_135_DPIB6__FUNC_EINT108 (MTK_PIN_NO(135) | 2)
-#define MT8135_PIN_135_DPIB6__FUNC_CLKM5 (MTK_PIN_NO(135) | 3)
-#define MT8135_PIN_135_DPIB6__FUNC_SCL3 (MTK_PIN_NO(135) | 4)
-#define MT8135_PIN_135_DPIB6__FUNC_PWM6 (MTK_PIN_NO(135) | 5)
-
-#define MT8135_PIN_136_DPIB7__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
-#define MT8135_PIN_136_DPIB7__FUNC_DPI0_B7 (MTK_PIN_NO(136) | 1)
-#define MT8135_PIN_136_DPIB7__FUNC_EINT109 (MTK_PIN_NO(136) | 2)
-#define MT8135_PIN_136_DPIB7__FUNC_CLKM6 (MTK_PIN_NO(136) | 3)
-#define MT8135_PIN_136_DPIB7__FUNC_SDA3 (MTK_PIN_NO(136) | 4)
-#define MT8135_PIN_136_DPIB7__FUNC_PWM7 (MTK_PIN_NO(136) | 5)
-
-#define MT8135_PIN_137_DPIG0__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
-#define MT8135_PIN_137_DPIG0__FUNC_DPI0_G0 (MTK_PIN_NO(137) | 1)
-#define MT8135_PIN_137_DPIG0__FUNC_EINT110 (MTK_PIN_NO(137) | 2)
-#define MT8135_PIN_137_DPIG0__FUNC_DSP1_ID (MTK_PIN_NO(137) | 5)
-
-#define MT8135_PIN_138_DPIG2__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
-#define MT8135_PIN_138_DPIG2__FUNC_DPI0_G2 (MTK_PIN_NO(138) | 1)
-#define MT8135_PIN_138_DPIG2__FUNC_EINT112 (MTK_PIN_NO(138) | 2)
-#define MT8135_PIN_138_DPIG2__FUNC_DSP1_IMS (MTK_PIN_NO(138) | 5)
-
-#define MT8135_PIN_139_DPIG3__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
-#define MT8135_PIN_139_DPIG3__FUNC_DPI0_G3 (MTK_PIN_NO(139) | 1)
-#define MT8135_PIN_139_DPIG3__FUNC_EINT113 (MTK_PIN_NO(139) | 2)
-#define MT8135_PIN_139_DPIG3__FUNC_DSP2_IMS (MTK_PIN_NO(139) | 5)
-
-#define MT8135_PIN_140_DPIG6__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
-#define MT8135_PIN_140_DPIG6__FUNC_DPI0_G6 (MTK_PIN_NO(140) | 1)
-#define MT8135_PIN_140_DPIG6__FUNC_EINT116 (MTK_PIN_NO(140) | 2)
-#define MT8135_PIN_140_DPIG6__FUNC_CM2DAT_2X_2 (MTK_PIN_NO(140) | 4)
-
-#define MT8135_PIN_141_DPIG7__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
-#define MT8135_PIN_141_DPIG7__FUNC_DPI0_G7 (MTK_PIN_NO(141) | 1)
-#define MT8135_PIN_141_DPIG7__FUNC_EINT117 (MTK_PIN_NO(141) | 2)
-#define MT8135_PIN_141_DPIG7__FUNC_CM2DAT_2X_3 (MTK_PIN_NO(141) | 4)
-
-#define MT8135_PIN_142_DPIR0__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
-#define MT8135_PIN_142_DPIR0__FUNC_DPI0_R0 (MTK_PIN_NO(142) | 1)
-#define MT8135_PIN_142_DPIR0__FUNC_EINT118 (MTK_PIN_NO(142) | 2)
-#define MT8135_PIN_142_DPIR0__FUNC_CM2DAT_2X_4 (MTK_PIN_NO(142) | 4)
-
-#define MT8135_PIN_143_DPIR1__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
-#define MT8135_PIN_143_DPIR1__FUNC_DPI0_R1 (MTK_PIN_NO(143) | 1)
-#define MT8135_PIN_143_DPIR1__FUNC_EINT119 (MTK_PIN_NO(143) | 2)
-#define MT8135_PIN_143_DPIR1__FUNC_CM2DAT_2X_5 (MTK_PIN_NO(143) | 4)
-
-#define MT8135_PIN_144_DPIR2__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
-#define MT8135_PIN_144_DPIR2__FUNC_DPI0_R2 (MTK_PIN_NO(144) | 1)
-#define MT8135_PIN_144_DPIR2__FUNC_EINT120 (MTK_PIN_NO(144) | 2)
-#define MT8135_PIN_144_DPIR2__FUNC_CM2DAT_2X_6 (MTK_PIN_NO(144) | 4)
-
-#define MT8135_PIN_145_DPIR4__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
-#define MT8135_PIN_145_DPIR4__FUNC_DPI0_R4 (MTK_PIN_NO(145) | 1)
-#define MT8135_PIN_145_DPIR4__FUNC_EINT122 (MTK_PIN_NO(145) | 2)
-#define MT8135_PIN_145_DPIR4__FUNC_CM2DAT_2X_8 (MTK_PIN_NO(145) | 4)
-
-#define MT8135_PIN_146_DPIR5__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
-#define MT8135_PIN_146_DPIR5__FUNC_DPI0_R5 (MTK_PIN_NO(146) | 1)
-#define MT8135_PIN_146_DPIR5__FUNC_EINT123 (MTK_PIN_NO(146) | 2)
-#define MT8135_PIN_146_DPIR5__FUNC_CM2DAT_2X_9 (MTK_PIN_NO(146) | 4)
-
-#define MT8135_PIN_147_DPIR6__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
-#define MT8135_PIN_147_DPIR6__FUNC_DPI0_R6 (MTK_PIN_NO(147) | 1)
-#define MT8135_PIN_147_DPIR6__FUNC_EINT124 (MTK_PIN_NO(147) | 2)
-#define MT8135_PIN_147_DPIR6__FUNC_CM2VSYNC_2X (MTK_PIN_NO(147) | 4)
-
-#define MT8135_PIN_148_DPIR7__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
-#define MT8135_PIN_148_DPIR7__FUNC_DPI0_R7 (MTK_PIN_NO(148) | 1)
-#define MT8135_PIN_148_DPIR7__FUNC_EINT125 (MTK_PIN_NO(148) | 2)
-#define MT8135_PIN_148_DPIR7__FUNC_CM2HSYNC_2X (MTK_PIN_NO(148) | 4)
-
-#define MT8135_PIN_149_TDN3__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
-#define MT8135_PIN_149_TDN3__FUNC_EINT36 (MTK_PIN_NO(149) | 2)
-
-#define MT8135_PIN_150_TDP3__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
-#define MT8135_PIN_150_TDP3__FUNC_EINT35 (MTK_PIN_NO(150) | 2)
-
-#define MT8135_PIN_151_TDN2__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
-#define MT8135_PIN_151_TDN2__FUNC_EINT169 (MTK_PIN_NO(151) | 2)
-
-#define MT8135_PIN_152_TDP2__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
-#define MT8135_PIN_152_TDP2__FUNC_EINT168 (MTK_PIN_NO(152) | 2)
-
-#define MT8135_PIN_153_TCN__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
-#define MT8135_PIN_153_TCN__FUNC_EINT163 (MTK_PIN_NO(153) | 2)
-
-#define MT8135_PIN_154_TCP__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
-#define MT8135_PIN_154_TCP__FUNC_EINT162 (MTK_PIN_NO(154) | 2)
-
-#define MT8135_PIN_155_TDN1__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
-#define MT8135_PIN_155_TDN1__FUNC_EINT167 (MTK_PIN_NO(155) | 2)
-
-#define MT8135_PIN_156_TDP1__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
-#define MT8135_PIN_156_TDP1__FUNC_EINT166 (MTK_PIN_NO(156) | 2)
-
-#define MT8135_PIN_157_TDN0__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
-#define MT8135_PIN_157_TDN0__FUNC_EINT165 (MTK_PIN_NO(157) | 2)
-
-#define MT8135_PIN_158_TDP0__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
-#define MT8135_PIN_158_TDP0__FUNC_EINT164 (MTK_PIN_NO(158) | 2)
-
-#define MT8135_PIN_159_RDN3__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
-#define MT8135_PIN_159_RDN3__FUNC_EINT18 (MTK_PIN_NO(159) | 2)
-
-#define MT8135_PIN_160_RDP3__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
-#define MT8135_PIN_160_RDP3__FUNC_EINT30 (MTK_PIN_NO(160) | 2)
-
-#define MT8135_PIN_161_RDN2__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
-#define MT8135_PIN_161_RDN2__FUNC_EINT31 (MTK_PIN_NO(161) | 2)
-
-#define MT8135_PIN_162_RDP2__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
-#define MT8135_PIN_162_RDP2__FUNC_EINT32 (MTK_PIN_NO(162) | 2)
-
-#define MT8135_PIN_163_RCN__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
-#define MT8135_PIN_163_RCN__FUNC_EINT33 (MTK_PIN_NO(163) | 2)
-
-#define MT8135_PIN_164_RCP__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
-#define MT8135_PIN_164_RCP__FUNC_EINT39 (MTK_PIN_NO(164) | 2)
-
-#define MT8135_PIN_165_RDN1__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
-
-#define MT8135_PIN_166_RDP1__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
-
-#define MT8135_PIN_167_RDN0__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
-
-#define MT8135_PIN_168_RDP0__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
-
-#define MT8135_PIN_169_RDN1_A__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
-#define MT8135_PIN_169_RDN1_A__FUNC_CMDAT6 (MTK_PIN_NO(169) | 1)
-#define MT8135_PIN_169_RDN1_A__FUNC_EINT175 (MTK_PIN_NO(169) | 2)
-
-#define MT8135_PIN_170_RDP1_A__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
-#define MT8135_PIN_170_RDP1_A__FUNC_CMDAT7 (MTK_PIN_NO(170) | 1)
-#define MT8135_PIN_170_RDP1_A__FUNC_EINT174 (MTK_PIN_NO(170) | 2)
-
-#define MT8135_PIN_171_RCN_A__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
-#define MT8135_PIN_171_RCN_A__FUNC_CMDAT8 (MTK_PIN_NO(171) | 1)
-#define MT8135_PIN_171_RCN_A__FUNC_EINT171 (MTK_PIN_NO(171) | 2)
-
-#define MT8135_PIN_172_RCP_A__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
-#define MT8135_PIN_172_RCP_A__FUNC_CMDAT9 (MTK_PIN_NO(172) | 1)
-#define MT8135_PIN_172_RCP_A__FUNC_EINT170 (MTK_PIN_NO(172) | 2)
-
-#define MT8135_PIN_173_RDN0_A__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
-#define MT8135_PIN_173_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(173) | 1)
-#define MT8135_PIN_173_RDN0_A__FUNC_EINT173 (MTK_PIN_NO(173) | 2)
-
-#define MT8135_PIN_174_RDP0_A__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
-#define MT8135_PIN_174_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(174) | 1)
-#define MT8135_PIN_174_RDP0_A__FUNC_EINT172 (MTK_PIN_NO(174) | 2)
-
-#define MT8135_PIN_175_RDN1_B__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
-#define MT8135_PIN_175_RDN1_B__FUNC_CMDAT2 (MTK_PIN_NO(175) | 1)
-#define MT8135_PIN_175_RDN1_B__FUNC_EINT181 (MTK_PIN_NO(175) | 2)
-#define MT8135_PIN_175_RDN1_B__FUNC_CMCSD2 (MTK_PIN_NO(175) | 3)
-
-#define MT8135_PIN_176_RDP1_B__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
-#define MT8135_PIN_176_RDP1_B__FUNC_CMDAT3 (MTK_PIN_NO(176) | 1)
-#define MT8135_PIN_176_RDP1_B__FUNC_EINT180 (MTK_PIN_NO(176) | 2)
-#define MT8135_PIN_176_RDP1_B__FUNC_CMCSD3 (MTK_PIN_NO(176) | 3)
-
-#define MT8135_PIN_177_RCN_B__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
-#define MT8135_PIN_177_RCN_B__FUNC_CMDAT4 (MTK_PIN_NO(177) | 1)
-#define MT8135_PIN_177_RCN_B__FUNC_EINT177 (MTK_PIN_NO(177) | 2)
-
-#define MT8135_PIN_178_RCP_B__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
-#define MT8135_PIN_178_RCP_B__FUNC_CMDAT5 (MTK_PIN_NO(178) | 1)
-#define MT8135_PIN_178_RCP_B__FUNC_EINT176 (MTK_PIN_NO(178) | 2)
-
-#define MT8135_PIN_179_RDN0_B__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
-#define MT8135_PIN_179_RDN0_B__FUNC_CMDAT0 (MTK_PIN_NO(179) | 1)
-#define MT8135_PIN_179_RDN0_B__FUNC_EINT179 (MTK_PIN_NO(179) | 2)
-#define MT8135_PIN_179_RDN0_B__FUNC_CMCSD0 (MTK_PIN_NO(179) | 3)
-
-#define MT8135_PIN_180_RDP0_B__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
-#define MT8135_PIN_180_RDP0_B__FUNC_CMDAT1 (MTK_PIN_NO(180) | 1)
-#define MT8135_PIN_180_RDP0_B__FUNC_EINT178 (MTK_PIN_NO(180) | 2)
-#define MT8135_PIN_180_RDP0_B__FUNC_CMCSD1 (MTK_PIN_NO(180) | 3)
-
-#define MT8135_PIN_181_CMPCLK__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
-#define MT8135_PIN_181_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(181) | 1)
-#define MT8135_PIN_181_CMPCLK__FUNC_EINT182 (MTK_PIN_NO(181) | 2)
-#define MT8135_PIN_181_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(181) | 3)
-#define MT8135_PIN_181_CMPCLK__FUNC_CM2MCLK_4X (MTK_PIN_NO(181) | 4)
-#define MT8135_PIN_181_CMPCLK__FUNC_TS_AUXADC_SEL_3 (MTK_PIN_NO(181) | 5)
-#define MT8135_PIN_181_CMPCLK__FUNC_VENC_TEST_CK (MTK_PIN_NO(181) | 6)
-#define MT8135_PIN_181_CMPCLK__FUNC_TESTA_OUT27 (MTK_PIN_NO(181) | 7)
-
-#define MT8135_PIN_182_CMMCLK__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
-#define MT8135_PIN_182_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(182) | 1)
-#define MT8135_PIN_182_CMMCLK__FUNC_EINT183 (MTK_PIN_NO(182) | 2)
-#define MT8135_PIN_182_CMMCLK__FUNC_TS_AUXADC_SEL_2 (MTK_PIN_NO(182) | 5)
-#define MT8135_PIN_182_CMMCLK__FUNC_TESTA_OUT28 (MTK_PIN_NO(182) | 7)
-
-#define MT8135_PIN_183_CMRST__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
-#define MT8135_PIN_183_CMRST__FUNC_CMRST (MTK_PIN_NO(183) | 1)
-#define MT8135_PIN_183_CMRST__FUNC_EINT185 (MTK_PIN_NO(183) | 2)
-#define MT8135_PIN_183_CMRST__FUNC_TS_AUXADC_SEL_1 (MTK_PIN_NO(183) | 5)
-#define MT8135_PIN_183_CMRST__FUNC_TESTA_OUT30 (MTK_PIN_NO(183) | 7)
-
-#define MT8135_PIN_184_CMPDN__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
-#define MT8135_PIN_184_CMPDN__FUNC_CMPDN (MTK_PIN_NO(184) | 1)
-#define MT8135_PIN_184_CMPDN__FUNC_EINT184 (MTK_PIN_NO(184) | 2)
-#define MT8135_PIN_184_CMPDN__FUNC_TS_AUXADC_SEL_0 (MTK_PIN_NO(184) | 5)
-#define MT8135_PIN_184_CMPDN__FUNC_TESTA_OUT29 (MTK_PIN_NO(184) | 7)
-
-#define MT8135_PIN_185_CMFLASH__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
-#define MT8135_PIN_185_CMFLASH__FUNC_CMFLASH (MTK_PIN_NO(185) | 1)
-#define MT8135_PIN_185_CMFLASH__FUNC_EINT186 (MTK_PIN_NO(185) | 2)
-#define MT8135_PIN_185_CMFLASH__FUNC_CM2MCLK_3X (MTK_PIN_NO(185) | 3)
-#define MT8135_PIN_185_CMFLASH__FUNC_MFG_TEST_CK_1 (MTK_PIN_NO(185) | 6)
-#define MT8135_PIN_185_CMFLASH__FUNC_TESTA_OUT31 (MTK_PIN_NO(185) | 7)
-
-#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
-#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_MRG_I2S_P_CLK (MTK_PIN_NO(186) | 1)
-#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_EINT14 (MTK_PIN_NO(186) | 2)
-#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(186) | 3)
-#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_PCM0_CK (MTK_PIN_NO(186) | 4)
-#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_DSP2_ICK (MTK_PIN_NO(186) | 5)
-#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_IMG_TEST_CK (MTK_PIN_NO(186) | 6)
-#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_USB_SCL (MTK_PIN_NO(186) | 7)
-
-#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
-#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_MRG_I2S_SYNC (MTK_PIN_NO(187) | 1)
-#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_EINT16 (MTK_PIN_NO(187) | 2)
-#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_I2SIN_WS (MTK_PIN_NO(187) | 3)
-#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_PCM0_WS (MTK_PIN_NO(187) | 4)
-#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_DISP_TEST_CK (MTK_PIN_NO(187) | 6)
-
-#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
-#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MRG_I2S_PCM_RX (MTK_PIN_NO(188) | 1)
-#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_EINT15 (MTK_PIN_NO(188) | 2)
-#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_I2SIN_DAT (MTK_PIN_NO(188) | 3)
-#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_PCM0_DI (MTK_PIN_NO(188) | 4)
-#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_DSP2_ID (MTK_PIN_NO(188) | 5)
-#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MFG_TEST_CK (MTK_PIN_NO(188) | 6)
-#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_USB_SDA (MTK_PIN_NO(188) | 7)
-
-#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
-#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_MRG_I2S_PCM_TX (MTK_PIN_NO(189) | 1)
-#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_EINT17 (MTK_PIN_NO(189) | 2)
-#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_I2SOUT_DAT (MTK_PIN_NO(189) | 3)
-#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_PCM0_DO (MTK_PIN_NO(189) | 4)
-#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_VDEC_TEST_CK (MTK_PIN_NO(189) | 6)
-
-#define MT8135_PIN_190_SRCLKENAI__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
-#define MT8135_PIN_190_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(190) | 1)
-
-#define MT8135_PIN_191_URXD3__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
-#define MT8135_PIN_191_URXD3__FUNC_URXD3 (MTK_PIN_NO(191) | 1)
-#define MT8135_PIN_191_URXD3__FUNC_EINT87 (MTK_PIN_NO(191) | 2)
-#define MT8135_PIN_191_URXD3__FUNC_UTXD3 (MTK_PIN_NO(191) | 3)
-#define MT8135_PIN_191_URXD3__FUNC_TS_AUX_ST (MTK_PIN_NO(191) | 5)
-#define MT8135_PIN_191_URXD3__FUNC_PWM4 (MTK_PIN_NO(191) | 6)
-
-#define MT8135_PIN_192_UTXD3__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
-#define MT8135_PIN_192_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(192) | 1)
-#define MT8135_PIN_192_UTXD3__FUNC_EINT86 (MTK_PIN_NO(192) | 2)
-#define MT8135_PIN_192_UTXD3__FUNC_URXD3 (MTK_PIN_NO(192) | 3)
-#define MT8135_PIN_192_UTXD3__FUNC_TS_AUX_CS_B (MTK_PIN_NO(192) | 5)
-#define MT8135_PIN_192_UTXD3__FUNC_PWM3 (MTK_PIN_NO(192) | 6)
-
-#define MT8135_PIN_193_SDA2__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
-#define MT8135_PIN_193_SDA2__FUNC_SDA2 (MTK_PIN_NO(193) | 1)
-#define MT8135_PIN_193_SDA2__FUNC_EINT95 (MTK_PIN_NO(193) | 2)
-#define MT8135_PIN_193_SDA2__FUNC_CLKM5 (MTK_PIN_NO(193) | 3)
-#define MT8135_PIN_193_SDA2__FUNC_PWM5 (MTK_PIN_NO(193) | 4)
-#define MT8135_PIN_193_SDA2__FUNC_TS_AUX_PWDB (MTK_PIN_NO(193) | 5)
-
-#define MT8135_PIN_194_SCL2__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
-#define MT8135_PIN_194_SCL2__FUNC_SCL2 (MTK_PIN_NO(194) | 1)
-#define MT8135_PIN_194_SCL2__FUNC_EINT94 (MTK_PIN_NO(194) | 2)
-#define MT8135_PIN_194_SCL2__FUNC_CLKM4 (MTK_PIN_NO(194) | 3)
-#define MT8135_PIN_194_SCL2__FUNC_PWM4 (MTK_PIN_NO(194) | 4)
-#define MT8135_PIN_194_SCL2__FUNC_TS_AUXADC_TEST_CK (MTK_PIN_NO(194) | 5)
-
-#define MT8135_PIN_195_SDA1__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
-#define MT8135_PIN_195_SDA1__FUNC_SDA1 (MTK_PIN_NO(195) | 1)
-#define MT8135_PIN_195_SDA1__FUNC_EINT93 (MTK_PIN_NO(195) | 2)
-#define MT8135_PIN_195_SDA1__FUNC_CLKM3 (MTK_PIN_NO(195) | 3)
-#define MT8135_PIN_195_SDA1__FUNC_PWM3 (MTK_PIN_NO(195) | 4)
-#define MT8135_PIN_195_SDA1__FUNC_TS_AUX_SCLK_PWDB (MTK_PIN_NO(195) | 5)
-
-#define MT8135_PIN_196_SCL1__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
-#define MT8135_PIN_196_SCL1__FUNC_SCL1 (MTK_PIN_NO(196) | 1)
-#define MT8135_PIN_196_SCL1__FUNC_EINT92 (MTK_PIN_NO(196) | 2)
-#define MT8135_PIN_196_SCL1__FUNC_CLKM2 (MTK_PIN_NO(196) | 3)
-#define MT8135_PIN_196_SCL1__FUNC_PWM2 (MTK_PIN_NO(196) | 4)
-#define MT8135_PIN_196_SCL1__FUNC_TS_AUX_DIN (MTK_PIN_NO(196) | 5)
-
-#define MT8135_PIN_197_MSDC3_DAT2__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
-#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(197) | 1)
-#define MT8135_PIN_197_MSDC3_DAT2__FUNC_EINT71 (MTK_PIN_NO(197) | 2)
-#define MT8135_PIN_197_MSDC3_DAT2__FUNC_SCL6 (MTK_PIN_NO(197) | 3)
-#define MT8135_PIN_197_MSDC3_DAT2__FUNC_PWM5 (MTK_PIN_NO(197) | 4)
-#define MT8135_PIN_197_MSDC3_DAT2__FUNC_CLKM4 (MTK_PIN_NO(197) | 5)
-#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MFG_TEST_CK_2 (MTK_PIN_NO(197) | 6)
-
-#define MT8135_PIN_198_MSDC3_DAT3__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
-#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(198) | 1)
-#define MT8135_PIN_198_MSDC3_DAT3__FUNC_EINT72 (MTK_PIN_NO(198) | 2)
-#define MT8135_PIN_198_MSDC3_DAT3__FUNC_SDA6 (MTK_PIN_NO(198) | 3)
-#define MT8135_PIN_198_MSDC3_DAT3__FUNC_PWM6 (MTK_PIN_NO(198) | 4)
-#define MT8135_PIN_198_MSDC3_DAT3__FUNC_CLKM5 (MTK_PIN_NO(198) | 5)
-#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MFG_TEST_CK_3 (MTK_PIN_NO(198) | 6)
-
-#define MT8135_PIN_199_MSDC3_CMD__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
-#define MT8135_PIN_199_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(199) | 1)
-#define MT8135_PIN_199_MSDC3_CMD__FUNC_EINT68 (MTK_PIN_NO(199) | 2)
-#define MT8135_PIN_199_MSDC3_CMD__FUNC_SDA2 (MTK_PIN_NO(199) | 3)
-#define MT8135_PIN_199_MSDC3_CMD__FUNC_PWM2 (MTK_PIN_NO(199) | 4)
-#define MT8135_PIN_199_MSDC3_CMD__FUNC_CLKM1 (MTK_PIN_NO(199) | 5)
-#define MT8135_PIN_199_MSDC3_CMD__FUNC_MFG_TEST_CK_4 (MTK_PIN_NO(199) | 6)
-
-#define MT8135_PIN_200_MSDC3_CLK__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
-#define MT8135_PIN_200_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(200) | 1)
-#define MT8135_PIN_200_MSDC3_CLK__FUNC_EINT67 (MTK_PIN_NO(200) | 2)
-#define MT8135_PIN_200_MSDC3_CLK__FUNC_SCL2 (MTK_PIN_NO(200) | 3)
-#define MT8135_PIN_200_MSDC3_CLK__FUNC_PWM1 (MTK_PIN_NO(200) | 4)
-#define MT8135_PIN_200_MSDC3_CLK__FUNC_CLKM0 (MTK_PIN_NO(200) | 5)
-
-#define MT8135_PIN_201_MSDC3_DAT1__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
-#define MT8135_PIN_201_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(201) | 1)
-#define MT8135_PIN_201_MSDC3_DAT1__FUNC_EINT70 (MTK_PIN_NO(201) | 2)
-#define MT8135_PIN_201_MSDC3_DAT1__FUNC_SDA3 (MTK_PIN_NO(201) | 3)
-#define MT8135_PIN_201_MSDC3_DAT1__FUNC_PWM4 (MTK_PIN_NO(201) | 4)
-#define MT8135_PIN_201_MSDC3_DAT1__FUNC_CLKM3 (MTK_PIN_NO(201) | 5)
-
-#define MT8135_PIN_202_MSDC3_DAT0__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
-#define MT8135_PIN_202_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(202) | 1)
-#define MT8135_PIN_202_MSDC3_DAT0__FUNC_EINT69 (MTK_PIN_NO(202) | 2)
-#define MT8135_PIN_202_MSDC3_DAT0__FUNC_SCL3 (MTK_PIN_NO(202) | 3)
-#define MT8135_PIN_202_MSDC3_DAT0__FUNC_PWM3 (MTK_PIN_NO(202) | 4)
-#define MT8135_PIN_202_MSDC3_DAT0__FUNC_CLKM2 (MTK_PIN_NO(202) | 5)
-
-#endif /* __DTS_MT8135_PINFUNC_H */
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index 0e4e835026db..0f291ad22d3a 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -9,7 +9,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/mt8135-resets.h>
-#include "mt8135-pinfunc.h"
+#include <dt-bindings/pinctrl/mt8135-pinfunc.h>
 
 / {
 	#address-cells = <2>;
@@ -152,7 +152,6 @@
 			compatible = "mediatek,mt8135-pinctrl";
 			reg = <0 0x1000b000 0 0x1000>;
 			mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>;
-			pins-are-numbered;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/mxs-pinfunc.h b/arch/arm/boot/dts/mxs-pinfunc.h
index c6da987b20cb..31297abcbc71 100644
--- a/arch/arm/boot/dts/mxs-pinfunc.h
+++ b/arch/arm/boot/dts/mxs-pinfunc.h
@@ -1,14 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Header providing constants for i.MX28 pinctrl bindings.
  *
  * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #ifndef __DT_BINDINGS_MXS_PINCTRL_H__
diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi
index 41744cc2bc72..01e1bb7c3c6c 100644
--- a/arch/arm/boot/dts/nspire-classic.dtsi
+++ b/arch/arm/boot/dts/nspire-classic.dtsi
@@ -17,7 +17,7 @@
 
 &fast_timer {
 	/* compatible = "lsi,zevio-timer"; */
-	reg = <0x90010000 0x1000>, <0x900A0010 0x8>;
+	reg = <0x90010000 0x1000>, <0x900a0010 0x8>;
 };
 
 &uart {
@@ -30,12 +30,12 @@
 
 &timer0 {
 	/* compatible = "lsi,zevio-timer"; */
-	reg = <0x900C0000 0x1000>, <0x900A0018 0x8>;
+	reg = <0x900c0000 0x1000>, <0x900a0018 0x8>;
 };
 
 &timer1 {
 	compatible = "lsi,zevio-timer";
-	reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
+	reg = <0x900d0000 0x1000>, <0x900a0020 0x8>;
 };
 
 &keypad {
@@ -66,10 +66,10 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		intc: interrupt-controller@DC000000 {
+		intc: interrupt-controller@dc000000 {
 			compatible = "lsi,zevio-intc";
 			interrupt-controller;
-			reg = <0xDC000000 0x1000>;
+			reg = <0xdc000000 0x1000>;
 			#interrupt-cells = <1>;
 		};
 	};
diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts
index 0c16b04e2744..590b7dff6ae5 100644
--- a/arch/arm/boot/dts/nspire-cx.dts
+++ b/arch/arm/boot/dts/nspire-cx.dts
@@ -92,10 +92,10 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		intc: interrupt-controller@DC000000 {
+		intc: interrupt-controller@dc000000 {
 			compatible = "arm,pl190-vic";
 			interrupt-controller;
-			reg = <0xDC000000 0x1000>;
+			reg = <0xdc000000 0x1000>;
 			#interrupt-cells = <1>;
 		};
 
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
index 90e033d9141f..bb240e6a3a6f 100644
--- a/arch/arm/boot/dts/nspire.dtsi
+++ b/arch/arm/boot/dts/nspire.dtsi
@@ -20,9 +20,9 @@
 		reg = <0x00000000 0x80000>;
 	};
 
-	sram: sram@A4000000 {
+	sram: sram@a4000000 {
 		device = "memory";
-		reg = <0xA4000000 0x20000>;
+		reg = <0xa4000000 0x20000>;
 	};
 
 	timer_clk: timer_clk {
@@ -33,12 +33,12 @@
 
 	base_clk: base_clk {
 		#clock-cells = <0>;
-		reg = <0x900B0024 0x4>;
+		reg = <0x900b0024 0x4>;
 	};
 
 	ahb_clk: ahb_clk {
 		#clock-cells = <0>;
-		reg = <0x900B0024 0x4>;
+		reg = <0x900b0024 0x4>;
 		clocks = <&base_clk>;
 	};
 
@@ -71,28 +71,28 @@
 		#size-cells = <1>;
 		ranges;
 
-		spi: spi@A9000000 {
-			reg = <0xA9000000 0x1000>;
+		spi: spi@a9000000 {
+			reg = <0xa9000000 0x1000>;
 		};
 
-		usb0: usb@B0000000 {
+		usb0: usb@b0000000 {
 			compatible = "lsi,zevio-usb";
-			reg = <0xB0000000 0x1000>;
+			reg = <0xb0000000 0x1000>;
 			interrupts = <8>;
 
 			usb-phy = <&usb_phy>;
 			vbus-supply = <&vbus_reg>;
 		};
 
-		usb1: usb@B4000000 {
-			reg = <0xB4000000 0x1000>;
+		usb1: usb@b4000000 {
+			reg = <0xb4000000 0x1000>;
 			interrupts = <9>;
 			status = "disabled";
 		};
 
-		lcd: lcd@C0000000 {
+		lcd: lcd@c0000000 {
 			compatible = "arm,pl111", "arm,primecell";
-			reg = <0xC0000000 0x1000>;
+			reg = <0xc0000000 0x1000>;
 			interrupts = <21>;
 
 			/*
@@ -105,17 +105,17 @@
 			clock-names = "clcdclk", "apb_pclk";
 		};
 
-		adc: adc@C4000000 {
-			reg = <0xC4000000 0x1000>;
+		adc: adc@c4000000 {
+			reg = <0xc4000000 0x1000>;
 			interrupts = <11>;
 		};
 
-		tdes: crypto@C8010000 {
-			reg = <0xC8010000 0x1000>;
+		tdes: crypto@c8010000 {
+			reg = <0xc8010000 0x1000>;
 		};
 
-		sha256: crypto@CC000000 {
-			reg = <0xCC000000 0x1000>;
+		sha256: crypto@cc000000 {
+			reg = <0xcc000000 0x1000>;
 		};
 
 		apb@90000000 {
@@ -143,16 +143,16 @@
 				interrupts = <1>;
 			};
 
-			timer0: timer@900C0000 {
-				reg = <0x900C0000 0x1000>;
+			timer0: timer@900c0000 {
+				reg = <0x900c0000 0x1000>;
 				clocks = <&timer_clk>, <&timer_clk>,
 					 <&timer_clk>;
 				clock-names = "timer0clk", "timer1clk",
 					      "apb_pclk";
 			};
 
-			timer1: timer@900D0000 {
-				reg = <0x900D0000 0x1000>;
+			timer1: timer@900d0000 {
+				reg = <0x900d0000 0x1000>;
 				interrupts = <19>;
 				clocks = <&timer_clk>, <&timer_clk>,
 					 <&timer_clk>;
@@ -171,18 +171,18 @@
 				interrupts = <4>;
 			};
 
-			misc: misc@900A0000 {
-				reg = <0x900A0000 0x1000>;
+			misc: misc@900a0000 {
+				reg = <0x900a0000 0x1000>;
 			};
 
-			pwr: pwr@900B0000 {
-				reg = <0x900B0000 0x1000>;
+			pwr: pwr@900b0000 {
+				reg = <0x900b0000 0x1000>;
 				interrupts = <15>;
 			};
 
-			keypad: input@900E0000 {
+			keypad: input@900e0000 {
 				compatible = "ti,nspire-keypad";
-				reg = <0x900E0000 0x1000>;
+				reg = <0x900e0000 0x1000>;
 				interrupts = <16>;
 
 				scan-interval = <1000>;
@@ -191,8 +191,8 @@
 				clocks = <&apb_pclk>;
 			};
 
-			contrast: contrast@900F0000 {
-				reg = <0x900F0000 0x1000>;
+			contrast: contrast@900f0000 {
+				reg = <0x900f0000 0x1000>;
 			};
 
 			led: led@90110000 {
diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
index 3696980a3da1..c7b5ef15b716 100644
--- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
+++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
@@ -110,6 +110,7 @@
 			compatible = "nuvoton,npcm750-reset";
 			reg = <0xf0801000 0x70>;
 			#reset-cells = <2>;
+			nuvoton,sysgcr = <&gcr>;
 		};
 
 		clk: clock-controller@f0801000 {
@@ -128,7 +129,7 @@
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			ethernet = <0>;
-			clocks	= <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
+			clocks = <&clk_rg1refck>, <&clk NPCM7XX_CLK_AHB>;
 			clock-names = "stmmaceth", "clk_gmac";
 			pinctrl-names = "default";
 			pinctrl-0 = <&rg1_pins
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
new file mode 100644
index 000000000000..9e9eba8bad5e
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
@@ -0,0 +1,1135 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Quanta Computer Inc. George.Hung@quantatw.com
+
+/dts-v1/;
+#include "nuvoton-npcm730.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Quanta GBS Board (Device Tree)";
+	compatible = "quanta,gbs-bmc","nuvoton,npcm730";
+
+	aliases {
+		ethernet1 = &gmac0;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		i2c16 = &i2c0_slotPE0_0;
+		i2c17 = &i2c0_slotPE1_1;
+		i2c18 = &i2c0_slotUSB_2;
+		i2c19 = &i2c0_3;
+		i2c20 = &i2c5_i2cool_0;
+		i2c21 = &i2c5_i2cool_1;
+		i2c22 = &i2c5_i2cool_2;
+		i2c23 = &i2c5_hsbp_fru_3;
+		i2c24 = &i2c6_u2_15_0;
+		i2c25 = &i2c6_u2_14_1;
+		i2c26 = &i2c6_u2_13_2;
+		i2c27 = &i2c6_u2_12_3;
+		i2c28 = &i2c7_u2_11_0;
+		i2c29 = &i2c7_u2_10_1;
+		i2c30 = &i2c7_u2_9_2;
+		i2c31 = &i2c7_u2_8_3;
+		i2c32 = &i2c9_vddcr_cpu;
+		i2c33 = &i2c9_vddcr_soc;
+		i2c34 = &i2c9_vddio_efgh;
+		i2c35 = &i2c9_vddio_abcd;
+		i2c36 = &i2c10_u2_7_0;
+		i2c37 = &i2c10_u2_6_1;
+		i2c38 = &i2c10_u2_5_2;
+		i2c39 = &i2c10_u2_4_3;
+		i2c40 = &i2c11_clk_buf0_0;
+		i2c41 = &i2c11_clk_buf1_1;
+		i2c42 = &i2c11_clk_buf2_2;
+		i2c43 = &i2c11_clk_buf3_3;
+		i2c44 = &i2c14_u2_3_0;
+		i2c45 = &i2c14_u2_2_1;
+		i2c46 = &i2c14_u2_1_2;
+		i2c47 = &i2c14_u2_0_3;
+		fiu0 = &fiu0;
+		fiu1 = &fiu3;
+	};
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		sas-cable0 {
+			label = "sas-cable0";
+			gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+			linux,code = <73>;
+		};
+
+		sas-cable1 {
+			label = "sas-cable1";
+			gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+			linux,code = <72>;
+		};
+
+		sas-cable2 {
+			label = "sas-cable2";
+			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <71>;
+		};
+
+		sas-cable3 {
+			label = "sas-cable3";
+			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+			linux,code = <70>;
+		};
+
+		sata0 {
+			label = "sata0";
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		hsbp-cable {
+			label = "hsbp-cable";
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			linux,code = <57>;
+		};
+
+		fanbd-cable {
+			label = "fanbd-cable";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			linux,code = <58>;
+		};
+
+		bp12v-cable {
+			label = "bp12v-cable";
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+			linux,code = <69>;
+		};
+
+		pe-slot0 {
+			label = "pe-slot0";
+			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+			linux,code = <120>;
+		};
+
+		pe-slot1 {
+			label = "pe-slot1";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			linux,code = <121>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 1>, <&adc 2>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat { /* gpio153 */
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		attention { /* gpio215 */
+			gpios = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		sys_boot_status { /* gpio216 */
+			gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+			retain-state-shutdown;
+		};
+
+		bmc_fault { /* gpio217 */
+			gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "panic";
+			panic-indicator;
+		};
+
+		led_u2_0_locate {
+			gpios = <&pca9535_ledlocate 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_1_locate {
+			gpios = <&pca9535_ledlocate 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_2_locate {
+			gpios = <&pca9535_ledlocate 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_3_locate {
+			gpios = <&pca9535_ledlocate 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_4_locate {
+			gpios = <&pca9535_ledlocate 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_5_locate {
+			gpios = <&pca9535_ledlocate 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_6_locate {
+			gpios = <&pca9535_ledlocate 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_7_locate {
+			gpios = <&pca9535_ledlocate 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_8_locate {
+			gpios = <&pca9535_ledlocate 11 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_9_locate {
+			gpios = <&pca9535_ledlocate 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_10_locate {
+			gpios = <&pca9535_ledlocate 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_11_locate {
+			gpios = <&pca9535_ledlocate 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_12_locate {
+			gpios = <&pca9535_ledlocate 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_13_locate {
+			gpios = <&pca9535_ledlocate 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_14_locate {
+			gpios = <&pca9535_ledlocate 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_15_locate {
+			gpios = <&pca9535_ledlocate 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_0_fault {
+			gpios = <&pca9535_ledfault 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_1_fault {
+			gpios = <&pca9535_ledfault 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_2_fault {
+			gpios = <&pca9535_ledfault 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_3_fault {
+			gpios = <&pca9535_ledfault 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_4_fault {
+			gpios = <&pca9535_ledfault 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_5_fault {
+			gpios = <&pca9535_ledfault 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_6_fault {
+			gpios = <&pca9535_ledfault 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_7_fault {
+			gpios = <&pca9535_ledfault 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_8_fault {
+			gpios = <&pca9535_ledfault 11 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_9_fault {
+			gpios = <&pca9535_ledfault 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_10_fault {
+			gpios = <&pca9535_ledfault 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_11_fault {
+			gpios = <&pca9535_ledfault 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_12_fault {
+			gpios = <&pca9535_ledfault 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_13_fault {
+			gpios = <&pca9535_ledfault 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_14_fault {
+			gpios = <&pca9535_ledfault 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_u2_15_fault {
+			gpios = <&pca9535_ledfault 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+	};
+
+	seven-seg-disp {
+		compatible = "seven-seg-gpio-dev";
+		refresh-interval-ms = /bits/ 16 <600>;
+		clock-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		data-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		clear-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	pcie-slot {
+		pcie1: pcie-slot@1 {
+			label = "PE0";
+		};
+		pcie2: pcie-slot@2 {
+			label = "PE1";
+		};
+	};
+};
+
+&fiu0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0cs1_pins>;
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <2>;
+		label = "bmc";
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			u-boot@0 {
+				label = "u-boot";
+				reg = <0x0000000 0xf0000>;
+			};
+			image-descriptor@f0000 {
+				label = "image-descriptor";
+				reg = <0xf0000 0x10000>;
+			};
+			hoth-update@100000 {
+				label = "hoth-update";
+				reg = <0x100000 0x100000>;
+			};
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x500000>;
+			};
+			rofs@700000 {
+				label = "rofs";
+				reg = <0x700000 0x35f0000>;
+			};
+			rwfs@3cf0000 {
+				label = "rwfs";
+				reg = <0x3cf0000 0x300000>;
+			};
+			hoth-mailbox@3ff0000 {
+				label = "hoth-mailbox";
+				reg = <0x3ff0000 0x10000>;
+			};
+		};
+	};
+};
+
+&fiu3 {
+	pinctrl-0 = <&spi3_pins>, <&spi3cs1_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
+		m25p,fast-read;
+		label = "pnor";
+	};
+	flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
+		m25p,fast-read;
+	};
+};
+
+&gcr {
+	serial_port_mux: uart-mux-controller {
+		compatible = "mmio-mux";
+		#mux-control-cells = <1>;
+		mux-reg-masks = <0x38 0x07>;
+		idle-states = <2>; /* Serial port mode 3 (takeover) */
+	};
+
+	uart1_mode_mux: uart1-mode-mux-controller {
+		compatible = "mmio-mux";
+		#mux-control-cells = <1>;
+		mux-reg-masks = <0x64 0x01000000>;
+		idle-states = <0>; /* Set UART1 mode to normal (follow SPMOD) */
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	snps,eee-force-disable;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&watchdog1 {
+	status = "okay";
+};
+
+&rng {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&adc {
+	#io-channel-cells = <1>;
+	status = "okay";
+};
+
+&lpc_kcs {
+	kcs1: kcs1@0 {
+		status = "okay";
+	};
+
+	kcs2: kcs2@0 {
+		status = "okay";
+	};
+
+	kcs3: kcs3@0 {
+		status = "okay";
+	};
+};
+
+&spi1 {
+	cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; /* dummy - gpio147 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio224ol_pins &gpio227o_pins
+			&gpio228_pins>;
+	status = "okay";
+
+	jtag_master@0 {
+		compatible = "nuvoton,npcm750-jtag-master";
+		spi-max-frequency = <25000000>;
+		reg = <0>;
+		status = "okay";
+
+		pinctrl-names = "pspi", "gpio";
+		pinctrl-0 = <&pspi2_pins>;
+		pinctrl-1 = <&gpio224ol_pins &gpio227o_pins
+				&gpio228_pins>;
+
+		tck-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		tdi-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+		tdo-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+		tms-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+		reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+
+		i2c0_slotPE0_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			pcie-slot = &pcie1;
+		};
+
+		i2c0_slotPE1_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			pcie-slot = &pcie2;
+		};
+
+		i2c0_slotUSB_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pca9535_ifdet: pca9535-ifdet@24 {
+		compatible = "nxp,pca9535";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9535_pwren: pca9535-pwren@20 {
+		compatible = "nxp,pca9535";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"pwr_u2_3_en","pwr_u2_2_en",
+			"pwr_u2_1_en","pwr_u2_0_en",
+			"pwr_u2_7_en","pwr_u2_6_en",
+			"pwr_u2_5_en","pwr_u2_4_en",
+			"pwr_u2_11_en","pwr_u2_10_en",
+			"pwr_u2_9_en","pwr_u2_8_en",
+			"pwr_u2_15_en","pwr_u2_14_en",
+			"pwr_u2_13_en","pwr_u2_12_en";
+	};
+
+	pca9535_pwrgd: pca9535-pwrgd@21 {
+		compatible = "nxp,pca9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9535_ledlocate: pca9535-ledlocate@22 {
+		compatible = "nxp,pca9535";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+	};
+
+	pca9535_ledfault: pca9535-ledfault@23 {
+		compatible = "nxp,pca9535";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+	};
+
+	pca9535_pwrdisable: pca9535-pwrdisable@25 {
+		compatible = "nxp,pca9535";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"u2_3_pwr_dis","u2_2_pwr_dis",
+			"u2_1_pwr_dis","u2_0_pwr_dis",
+			"u2_7_pwr_dis","u2_6_pwr_dis",
+			"u2_5_pwr_dis","u2_4_pwr_dis",
+			"u2_11_pwr_dis","u2_10_pwr_dis",
+			"u2_9_pwr_dis","u2_8_pwr_dis",
+			"u2_15_pwr_dis","u2_14_pwr_dis",
+			"u2_13_pwr_dis","u2_12_pwr_dis";
+	};
+
+	pca9535_perst: pca9535-perst@26 {
+		compatible = "nxp,pca9535";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"u2_15_perst","u2_14_perst",
+			"u2_13_perst","u2_12_perst",
+			"u2_11_perst","u2_10_perst",
+			"u2_9_perst","u2_8_perst",
+			"u2_7_perst","u2_6_perst",
+			"u2_5_perst","u2_4_perst",
+			"u2_3_perst","u2_2_perst",
+			"u2_1_perst","u2_0_perst";
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	sbtsi@4c {
+		compatible = "amd,sbtsi";
+		reg = <0x4c>;
+	};
+};
+
+&i2c5 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	mb_fru@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		i2c5_i2cool_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			max31725@54 {
+				compatible = "maxim,max31725";
+				reg = <0x54>;
+				status = "okay";
+			};
+		};
+
+		i2c5_i2cool_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			max31725@55 {
+				compatible = "maxim,max31725";
+				reg = <0x55>;
+				status = "okay";
+			};
+		};
+
+		i2c5_i2cool_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			max31725@5d {
+				compatible = "maxim,max31725";
+				reg = <0x5d>;
+				status = "okay";
+			};
+			fan_fru@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+
+		i2c5_hsbp_fru_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			hsbp_fru@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+				status = "okay";
+			};
+		};
+	};
+};
+
+&i2c6 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-switch@73 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x73>;
+		i2c-mux-idle-disconnect;
+
+		i2c6_u2_15_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c6_u2_14_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c6_u2_13_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c6_u2_12_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-switch@72 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		i2c-mux-idle-disconnect;
+
+		i2c7_u2_11_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c7_u2_10_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c7_u2_9_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c7_u2_8_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c8_adm1272: adm1272@10 {
+		compatible = "adi,adm1272";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+		shunt-resistor-micro-ohms = <300>;
+	};
+};
+
+&i2c9 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+
+		i2c9_vddcr_cpu: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			vrm@60 {
+				compatible = "isil,isl68137";
+				reg = <0x60>;
+			};
+		};
+
+		i2c9_vddcr_soc: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			vrm@61 {
+				compatible = "isil,isl68137";
+				reg = <0x61>;
+			};
+		};
+
+		i2c9_vddio_efgh: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			vrm@63 {
+				compatible = "isil,isl68137";
+				reg = <0x63>;
+			};
+		};
+
+		i2c9_vddio_abcd: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			vrm@45 {
+				compatible = "isil,isl68137";
+				reg = <0x45>;
+			};
+		};
+	};
+};
+
+&i2c10 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		i2c10_u2_7_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c10_u2_6_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c10_u2_5_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c10_u2_4_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c11 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-switch@76 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+
+		i2c11_clk_buf0_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c11_clk_buf1_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c11_clk_buf2_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c11_clk_buf3_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c12 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	max34451@4e {
+		compatible = "maxim,max34451";
+		reg = <0x4e>;
+	};
+	vrm@5d {
+		compatible = "isil,isl68137";
+		reg = <0x5d>;
+	};
+	vrm@5e {
+		compatible = "isil,isl68137";
+		reg = <0x5e>;
+	};
+};
+
+&i2c13 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c14 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c14_u2_3_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c14_u2_2_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c14_u2_1_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c14_u2_0_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&pwm_fan {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pwm0_pins &pwm1_pins
+		&pwm2_pins &pwm3_pins
+		&pwm4_pins
+		&fanin0_pins &fanin1_pins
+		&fanin2_pins &fanin3_pins
+		&fanin4_pins
+	>;
+	status = "okay";
+
+	fan@0 {
+		reg = <0x00>;
+		fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		fan-tach-ch = /bits/ 8 <0x01>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		fan-tach-ch = /bits/ 8 <0x02>;
+	};
+	fan@3 {
+		reg = <0x04>;
+		fan-tach-ch = /bits/ 8 <0x04>;
+	};
+	fan@4 {
+		reg = <0x03>;
+		fan-tach-ch = /bits/ 8 <0x03>;
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	gpio0: gpio@f0010000 {
+		/* POWER_OUT=gpio07, RESET_OUT=gpio06, PS_PWROK=gpio13 */
+		gpio-line-names =
+		/*0-31*/
+		"","","","","","","RESET_OUT","POWER_OUT",
+		"","","","","","PS_PWROK","","",
+		"","","","","","","","",
+		"","","","","","","","";
+	};
+	gpio1: gpio@f0011000 {
+		/* SIO_POWER_GOOD=gpio59 */
+		gpio-line-names =
+		/*32-63*/
+		"","","","","","","","",
+		"","","","","","","","",
+		"","","","","","","","",
+		"","","","SIO_POWER_GOOD","","","","";
+	};
+	gpio2: gpio@f0012000 {
+		bmc_usb_mux_oe_n {
+			gpio-hog;
+			gpios = <25 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "bmc-usb-mux-oe-n";
+		};
+		bmc_usb_mux_sel {
+			gpio-hog;
+			gpios = <26 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "bmc-usb-mux-sel";
+		};
+		bmc_usb2517_reset_n {
+			gpio-hog;
+			gpios = <27 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "bmc-usb2517-reset-n";
+		};
+	};
+	gpio3: gpio@f0013000 {
+		assert_cpu0_reset {
+			gpio-hog;
+			gpios = <14 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "assert-cpu0-reset";
+		};
+		assert_pwrok_cpu0_n {
+			gpio-hog;
+			gpios = <15 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "assert-pwrok-cpu0-n";
+		};
+		assert_cpu0_prochot {
+			gpio-hog;
+			gpios = <16 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "assert-cpu0-prochot";
+		};
+	};
+	gpio4: gpio@f0014000 {
+		/* POST_COMPLETE=gpio143 */
+		gpio-line-names =
+			/*128-159*/
+			"","","","","","","","",
+			"","","","","","","","POST_COMPLETE",
+			"","","","","","","","",
+			"","","","","","","","";
+	};
+	gpio5: gpio@f0015000 {
+		/* POWER_BUTTON=gpio177 */
+		gpio-line-names =
+			/*160-191*/
+			"","","","","","","","",
+			"","","","","","","","",
+			"","POWER_BUTTON","","","","","","",
+			"","","","","","","","";
+	};
+	gpio6: gpio@f0016000 {
+		/* SIO_S5=gpio199, RESET_BUTTON=gpio203 */
+		gpio-line-names =
+			/*192-223*/
+			"","","","","","","","SIO_S5",
+			"","","","RESET_BUTTON","","","","",
+			"","","","","","","","",
+			"","","","","","","","";
+	};
+
+	gpio224ol_pins: gpio224ol-pins {
+		pins = "GPIO224/SPIXCK";
+		bias-disable;
+		output-low;
+	};
+	gpio227o_pins: gpio227o-pins {
+		pins = "GPIO227/nSPIXCS0";
+		bias-disable;
+		output-high;
+	};
+	gpio228_pins: gpio228-pins {
+		pins = "GPIO228/nSPIXCS1";
+		bias-disable;
+		input-enable;
+	};
+};
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
index d4ff49939a3d..2a394cc15284 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
@@ -135,14 +135,14 @@
 	pinctrl-0 = <&spi0cs1_pins>;
 	status = "okay";
 
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
index 82a104b2a65f..f7b38bee039b 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
@@ -380,7 +380,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0cs1_pins>;
 	status = "okay";
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -388,7 +388,7 @@
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
 		label = "bmc";
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -415,14 +415,14 @@
 			};
 		};
 	};
-	spi-nor@1 {
+	flash@1 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <1>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -440,14 +440,14 @@
 
 &fiu3 {
 	pinctrl-0 = <&spi3_pins>;
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
 		spi-rx-bus-width = <2>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
index 9f13d08f5804..f53d45fa1de8 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "Nuvoton npcm750 Development Board (Device Tree)";
-	compatible = "nuvoton,npcm750";
+	compatible = "nuvoton,npcm750-evb", "nuvoton,npcm750";
 
 	aliases {
 		ethernet2 = &gmac0;
@@ -67,14 +67,14 @@
 
 &fiu0 {
 	status = "okay";
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -105,11 +105,11 @@
 				label = "rootfs";
 				reg = <0x0600000 0x700000>;
 				};
-			spare1@D00000 {
+			spare1@d00000 {
 				label = "spare1";
 				reg = <0x0D00000 0x200000>;
 				};
-			spare2@0F00000 {
+			spare2@f00000 {
 				label = "spare2";
 				reg = <0x0F00000 0x200000>;
 				};
@@ -128,14 +128,14 @@
 &fiu3 {
 	pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>;
 	status = "okay";
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-rx-bus-width = <2>;
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -324,7 +324,7 @@
 &spi0 {
 	cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
 	status = "okay";
-	Flash@0 {
+	flash@0 {
 		compatible = "winbond,w25q128",
 		"jedec,spi-nor";
 		reg = <0x0>;
@@ -345,7 +345,7 @@
 &spi1 {
 	cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 	status = "okay";
-	Flash@0 {
+	flash@0 {
 		compatible = "winbond,w25q128fw",
 		"jedec,spi-nor";
 		reg = <0x0>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
index 767e0ac0df7c..87359ab05db3 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
@@ -100,14 +100,14 @@
 	pinctrl-0 = <&spi0cs1_pins>;
 	status = "okay";
 
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@80000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -139,14 +139,14 @@
 		};
 	};
 
-	spi-nor@1 {
+	flash@1 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <1>;
 		npcm,fiu-rx-bus-width = <2>;
 
-		partitions@88000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -166,14 +166,14 @@
 	pinctrl-0 = <&spi3_pins>;
 	status = "okay";
 
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0>;
 		spi-rx-bus-width = <2>;
 
-		partitions@A0000000 {
+		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
index 13eee0fe5642..30eed40b89b5 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750.dtsi
+++ b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
@@ -51,7 +51,7 @@
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			ethernet = <1>;
-			clocks	= <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>;
+			clocks = <&clk_rg2refck>, <&clk NPCM7XX_CLK_AHB>;
 			clock-names = "stmmaceth", "clk_gmac";
 			pinctrl-names = "default";
 			pinctrl-0 = <&rg2_pins
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
new file mode 100644
index 000000000000..b78c116cbc18
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+// Copyright 2021 Jonathan Neuschäfer
+
+/dts-v1/;
+
+/* The last 16 MiB are dedicated to the GPU */
+/memreserve/ 0x07000000 0x01000000;
+
+#include "nuvoton-wpcm450.dtsi"
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Supermicro X9SCi-LN4F BMC";
+	compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x08000000>; /* 128 MiB */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins>;
+
+		uid {
+			label = "UID button";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		uid {
+			label = "UID";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		heartbeat {
+			label = "heartbeat";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fiu {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+		/* 0 */ "", "host-reset-control-n", "", "", "", "", "", "",
+		/* 8 */ "", "", "", "", "power-chassis-control-n", "", "uid-button", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 0 */ "", "", "", "", "led-heartbeat", "", "", "led-uid",
+		/* 8 */ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 0 */ "", "", "", "", "", "", "", "",
+		/* 8 */ "", "", "", "", "", "", "", "power-chassis-good";
+};
+
+&pinctrl {
+	key_pins: mux-keys {
+		groups = "gspi", "sspi";
+		function = "gpio";
+	};
+
+	led_pins: mux-leds {
+		groups = "hg3", "hg0", "pwm4";
+		function = "gpio";
+	};
+};
+
+&serial0 {
+	/*
+	 * Debug serial port. TX is exposed on the right pad of unpopulated
+	 * resistor R1247, RX on the right pad of R1162.
+	 */
+	status = "okay";
+};
+
+&serial1 {
+	/* "Serial over LAN" port. Connected to ttyS2 of the host system. */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
new file mode 100644
index 000000000000..fd671c7a1e5d
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
@@ -0,0 +1,493 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+// Copyright 2021 Jonathan Neuschäfer
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "nuvoton,wpcm450";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &gpio5;
+		gpio6 = &gpio6;
+		gpio7 = &gpio7;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	clk24m: clock-24mhz {
+		/* 24 MHz dummy clock */
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	refclk: clock-48mhz {
+		/* 48 MHz reference oscillator */
+		compatible = "fixed-clock";
+		clock-output-names = "ref";
+		clock-frequency = <48000000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&aic>;
+		ranges;
+
+		gcr: syscon@b0000000 {
+			compatible = "nuvoton,wpcm450-gcr", "syscon", "simple-mfd";
+			reg = <0xb0000000 0x200>;
+		};
+
+		clk: clock-controller@b0000200 {
+			compatible = "nuvoton,wpcm450-clk";
+			reg = <0xb0000200 0x100>;
+			clocks = <&refclk>;
+			clock-names = "ref";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		serial0: serial@b8000000 {
+			compatible = "nuvoton,wpcm450-uart";
+			reg = <0xb8000000 0x20>;
+			reg-shift = <2>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk24m>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&bsp_pins>;
+			status = "disabled";
+		};
+
+		serial1: serial@b8000100 {
+			compatible = "nuvoton,wpcm450-uart";
+			reg = <0xb8000100 0x20>;
+			reg-shift = <2>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk24m>;
+			status = "disabled";
+		};
+
+		timer0: timer@b8001000 {
+			compatible = "nuvoton,wpcm450-timer";
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xb8001000 0x1c>;
+			clocks = <&clk24m>;
+		};
+
+		watchdog0: watchdog@b800101c {
+			compatible = "nuvoton,wpcm450-wdt";
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xb800101c 0x4>;
+			clocks = <&clk24m>;
+		};
+
+		aic: interrupt-controller@b8002000 {
+			compatible = "nuvoton,wpcm450-aic";
+			reg = <0xb8002000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pinctrl: pinctrl@b8003000 {
+			compatible = "nuvoton,wpcm450-pinctrl";
+			reg = <0xb8003000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio0: gpio@0 {
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+					     <3 IRQ_TYPE_LEVEL_HIGH>,
+					     <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+			};
+
+			gpio1: gpio@1 {
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+			};
+
+			gpio2: gpio@2 {
+				reg = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio3: gpio@3 {
+				reg = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio4: gpio@4 {
+				reg = <4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio5: gpio@5 {
+				reg = <5>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio6: gpio@6 {
+				reg = <6>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio7: gpio@7 {
+				reg = <7>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			smb3_pins: mux-smb3 {
+				groups = "smb3";
+				function = "smb3";
+			};
+
+			smb4_pins: mux-smb4 {
+				groups = "smb4";
+				function = "smb4";
+			};
+
+			smb5_pins: mux-smb5 {
+				groups = "smb5";
+				function = "smb5";
+			};
+
+			scs1_pins: mux-scs1 {
+				groups = "scs1";
+				function = "scs1";
+			};
+
+			scs2_pins: mux-scs2 {
+				groups = "scs2";
+				function = "scs2";
+			};
+
+			scs3_pins: mux-scs3 {
+				groups = "scs3";
+				function = "scs3";
+			};
+
+			smb0_pins: mux-smb0 {
+				groups = "smb0";
+				function = "smb0";
+			};
+
+			smb1_pins: mux-smb1 {
+				groups = "smb1";
+				function = "smb1";
+			};
+
+			smb2_pins: mux-smb2 {
+				groups = "smb2";
+				function = "smb2";
+			};
+
+			bsp_pins: mux-bsp {
+				groups = "bsp";
+				function = "bsp";
+			};
+
+			hsp1_pins: mux-hsp1 {
+				groups = "hsp1";
+				function = "hsp1";
+			};
+
+			hsp2_pins: mux-hsp2 {
+				groups = "hsp2";
+				function = "hsp2";
+			};
+
+			r1err_pins: mux-r1err {
+				groups = "r1err";
+				function = "r1err";
+			};
+
+			r1md_pins: mux-r1md {
+				groups = "r1md";
+				function = "r1md";
+			};
+
+			rmii2_pins: mux-rmii2 {
+				groups = "rmii2";
+				function = "rmii2";
+			};
+
+			r2err_pins: mux-r2err {
+				groups = "r2err";
+				function = "r2err";
+			};
+
+			r2md_pins: mux-r2md {
+				groups = "r2md";
+				function = "r2md";
+			};
+
+			kbcc_pins: mux-kbcc {
+				groups = "kbcc";
+				function = "kbcc";
+			};
+
+			dvo0_pins: mux-dvo0 {
+				groups = "dvo";
+				function = "dvo0";
+			};
+
+			dvo3_pins: mux-dvo3 {
+				groups = "dvo";
+				function = "dvo3";
+			};
+
+			clko_pins: mux-clko {
+				groups = "clko";
+				function = "clko";
+			};
+
+			smi_pins: mux-smi {
+				groups = "smi";
+				function = "smi";
+			};
+
+			uinc_pins: mux-uinc {
+				groups = "uinc";
+				function = "uinc";
+			};
+
+			gspi_pins: mux-gspi {
+				groups = "gspi";
+				function = "gspi";
+			};
+
+			mben_pins: mux-mben {
+				groups = "mben";
+				function = "mben";
+			};
+
+			xcs2_pins: mux-xcs2 {
+				groups = "xcs2";
+				function = "xcs2";
+			};
+
+			xcs1_pins: mux-xcs1 {
+				groups = "xcs1";
+				function = "xcs1";
+			};
+
+			sdio_pins: mux-sdio {
+				groups = "sdio";
+				function = "sdio";
+			};
+
+			sspi_pins: mux-sspi {
+				groups = "sspi";
+				function = "sspi";
+			};
+
+			fi0_pins: mux-fi0 {
+				groups = "fi0";
+				function = "fi0";
+			};
+
+			fi1_pins: mux-fi1 {
+				groups = "fi1";
+				function = "fi1";
+			};
+
+			fi2_pins: mux-fi2 {
+				groups = "fi2";
+				function = "fi2";
+			};
+
+			fi3_pins: mux-fi3 {
+				groups = "fi3";
+				function = "fi3";
+			};
+
+			fi4_pins: mux-fi4 {
+				groups = "fi4";
+				function = "fi4";
+			};
+
+			fi5_pins: mux-fi5 {
+				groups = "fi5";
+				function = "fi5";
+			};
+
+			fi6_pins: mux-fi6 {
+				groups = "fi6";
+				function = "fi6";
+			};
+
+			fi7_pins: mux-fi7 {
+				groups = "fi7";
+				function = "fi7";
+			};
+
+			fi8_pins: mux-fi8 {
+				groups = "fi8";
+				function = "fi8";
+			};
+
+			fi9_pins: mux-fi9 {
+				groups = "fi9";
+				function = "fi9";
+			};
+
+			fi10_pins: mux-fi10 {
+				groups = "fi10";
+				function = "fi10";
+			};
+
+			fi11_pins: mux-fi11 {
+				groups = "fi11";
+				function = "fi11";
+			};
+
+			fi12_pins: mux-fi12 {
+				groups = "fi12";
+				function = "fi12";
+			};
+
+			fi13_pins: mux-fi13 {
+				groups = "fi13";
+				function = "fi13";
+			};
+
+			fi14_pins: mux-fi14 {
+				groups = "fi14";
+				function = "fi14";
+			};
+
+			fi15_pins: mux-fi15 {
+				groups = "fi15";
+				function = "fi15";
+			};
+
+			pwm0_pins: mux-pwm0 {
+				groups = "pwm0";
+				function = "pwm0";
+			};
+
+			pwm1_pins: mux-pwm1 {
+				groups = "pwm1";
+				function = "pwm1";
+			};
+
+			pwm2_pins: mux-pwm2 {
+				groups = "pwm2";
+				function = "pwm2";
+			};
+
+			pwm3_pins: mux-pwm3 {
+				groups = "pwm3";
+				function = "pwm3";
+			};
+
+			pwm4_pins: mux-pwm4 {
+				groups = "pwm4";
+				function = "pwm4";
+			};
+
+			pwm5_pins: mux-pwm5 {
+				groups = "pwm5";
+				function = "pwm5";
+			};
+
+			pwm6_pins: mux-pwm6 {
+				groups = "pwm6";
+				function = "pwm6";
+			};
+
+			pwm7_pins: mux-pwm7 {
+				groups = "pwm7";
+				function = "pwm7";
+			};
+
+			hg0_pins: mux-hg0 {
+				groups = "hg0";
+				function = "hg0";
+			};
+
+			hg1_pins: mux-hg1 {
+				groups = "hg1";
+				function = "hg1";
+			};
+
+			hg2_pins: mux-hg2 {
+				groups = "hg2";
+				function = "hg2";
+			};
+
+			hg3_pins: mux-hg3 {
+				groups = "hg3";
+				function = "hg3";
+			};
+
+			hg4_pins: mux-hg4 {
+				groups = "hg4";
+				function = "hg4";
+			};
+
+			hg5_pins: mux-hg5 {
+				groups = "hg5";
+				function = "hg5";
+			};
+
+			hg6_pins: mux-hg6 {
+				groups = "hg6";
+				function = "hg6";
+			};
+
+			hg7_pins: mux-hg7 {
+				groups = "hg7";
+				function = "hg7";
+			};
+		};
+
+		fiu: spi-controller@c8000000 {
+			compatible = "nuvoton,wpcm450-fiu";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc8000000 0x1000>, <0xc0000000 0x4000000>;
+			reg-names = "control", "memory";
+			clocks = <&clk 0>;
+			nuvoton,shm = <&shm>;
+			status = "disabled";
+		};
+
+		shm: syscon@c8001000 {
+			compatible = "nuvoton,wpcm450-shm", "syscon";
+			reg = <0xc8001000 0x1000>;
+			reg-io-width = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
index ded7e8fec9eb..3046ec572632 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
+++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
@@ -8,9 +8,9 @@
 
 / {
 	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
 	};
 
 	vdd33a: regulator-vdd33a {
@@ -25,8 +25,8 @@
 		compatible = "smsc,lan9221", "smsc,lan9115";
 		bank-width = <2>;
 		gpmc,device-width = <1>;
-		gpmc,cycle2cycle-samecsen = <1>;
-		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
 		gpmc,cs-on-ns = <5>;
 		gpmc,cs-rd-off-ns = <150>;
 		gpmc,cs-wr-off-ns = <150>;
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
index 7f6aefd13451..bc8961f3690f 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
+++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
@@ -12,9 +12,9 @@
 
 / {
 	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
 	};
 
 	vdd33a: regulator-vdd33a {
@@ -29,7 +29,7 @@
 		compatible = "smsc,lan9221","smsc,lan9115";
 		bank-width = <2>;
 
-		gpmc,mux-add-data;
+		gpmc,mux-add-data = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <42>;
 		gpmc,cs-wr-off-ns = <36>;
diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi
index d4ad9e58b199..8adc0ef01f6c 100644
--- a/arch/arm/boot/dts/omap-zoom-common.dtsi
+++ b/arch/arm/boot/dts/omap-zoom-common.dtsi
@@ -14,7 +14,7 @@
 	 * they probably share the same GPIO IRQ
 	 * REVISIT: Add timing support from slls644g.pdf
 	 */
-	uart@3,0 {
+	serial@3,0 {
 		compatible = "ns16550a";
 		reg = <3 0 8>;	/* CS3, offset 0, IO size 8 */
 		bank-width = <2>;
@@ -27,8 +27,8 @@
 		gpmc,mux-add-data = <0>;
 		gpmc,device-width = <1>;
 		gpmc,wait-pin = <1>;
-		gpmc,cycle2cycle-samecsen = <1>;
-		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
 		gpmc,cs-on-ns = <5>;
 		gpmc,cs-rd-off-ns = <155>;
 		gpmc,cs-wr-off-ns = <155>;
@@ -50,7 +50,7 @@
 		gpmc,wr-data-mux-bus-ns = <45>;
 		gpmc,wr-access-ns = <145>;
 	};
-	uart@3,1 {
+	serial@3,1 {
 		compatible = "ns16550a";
 		reg = <3 0x100 8>;	/* CS3, offset 0x100, IO size 8 */
 		bank-width = <2>;
@@ -61,7 +61,7 @@
 		clock-frequency = <1843200>;
 		current-speed = <115200>;
 	};
-	uart@3,2 {
+	serial@3,2 {
 		compatible = "ns16550a";
 		reg = <3 0x200 8>;	/* CS3, offset 0x200, IO size 8 */
 		bank-width = <2>;
@@ -72,7 +72,7 @@
 		clock-frequency = <1843200>;
 		current-speed = <115200>;
 	};
-	uart@3,3 {
+	serial@3,3 {
 		compatible = "ns16550a";
 		reg = <3 0x300 8>;	/* CS3, offset 0x300, IO size 8 */
 		bank-width = <2>;
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index f9c2a9938898..afabb36a8ac1 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP2 SoC
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/bus/ti-sysc.h>
@@ -120,8 +117,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <56>;
-			dmas = <&sdma 27 &sdma 28>;
-			dma-names = "tx", "rx";
 		};
 
 		i2c2: i2c@48072000 {
@@ -131,8 +126,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <57>;
-			dmas = <&sdma 29 &sdma 30>;
-			dma-names = "tx", "rx";
 		};
 
 		mcspi1: spi@48098000 {
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
index af964f139abf..5acf5dd87c59 100644
--- a/arch/arm/boot/dts/omap2420-h4.dts
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -21,7 +21,7 @@
 
 	nor@0,0 {
 		compatible = "cfi-flash";
-		linux,mtd-name= "intel,ge28f256l18b85";
+		linux,mtd-name = "intel,ge28f256l18b85";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0 0 0x04000000>;
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index 494bf6972005..821da51cb870 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP2420 SoC
  *
  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "omap2.dtsi"
@@ -192,16 +189,15 @@
 			compatible = "ti,omap2-mailbox";
 			reg = <0x48094000 0x200>;
 			interrupts = <26>, <34>;
-			interrupt-names = "dsp", "iva";
 			ti,hwmods = "mailbox";
 			#mbox-cells = <1>;
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <6>;
-			mbox_dsp: dsp {
+			mbox_dsp: mbox-dsp {
 				ti,mbox-tx = <0 0 0>;
 				ti,mbox-rx = <1 0 0>;
 			};
-			mbox_iva: iva {
+			mbox_iva: mbox-iva {
 				ti,mbox-tx = <2 1 3>;
 				ti,mbox-rx = <3 1 3>;
 			};
diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts
index 7d27e907533f..207070677e3a 100644
--- a/arch/arm/boot/dts/omap2430-sdp.dts
+++ b/arch/arm/boot/dts/omap2430-sdp.dts
@@ -43,8 +43,8 @@
 		gpmc,sync-clk-ps = <0>;
 		gpmc,mux-add-data = <2>;
 		gpmc,device-width = <1>;
-		gpmc,cycle2cycle-samecsen = <1>;
-		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
 		gpmc,cs-on-ns = <6>;
 		gpmc,cs-rd-off-ns = <187>;
 		gpmc,cs-wr-off-ns = <187>;
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index d19d8ba3b607..b9a9e6e45266 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP243x SoC
  *
  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "omap2.dtsi"
@@ -284,7 +281,7 @@
 			#mbox-cells = <1>;
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <6>;
-			mbox_dsp: dsp {
+			mbox_dsp: mbox-dsp {
 				ti,mbox-tx = <0 0 0>;
 				ti,mbox-rx = <1 0 0>;
 			};
diff --git a/arch/arm/boot/dts/omap3-beagle-ab4.dts b/arch/arm/boot/dts/omap3-beagle-ab4.dts
new file mode 100644
index 000000000000..990ff2d84686
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle-ab4.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "omap3-beagle.dts"
+
+/ {
+	model = "TI OMAP3 BeagleBoard A to B4";
+	compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
+};
+
+/*
+ * Workaround for capacitor C70 issue, see "Boards revision A and < B5"
+ * section at https://elinux.org/BeagleBoard_Community
+ */
+
+/* Unusable as clocksource because of unreliable oscillator */
+&counter32k {
+	status = "disabled";
+};
+
+/* Unusable as clockevent because of unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred always-on timer for clocksource */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt2_fck>;
+		assigned-clock-parents = <&sys_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index a858ebfa1500..1a085bc01317 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "TI OMAP3 BeagleBoard xM";
-	compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap3";
 
 	cpus {
 		cpu@0 {
@@ -370,7 +370,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index f9f34b8458e9..47ff1ffddfc5 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -28,18 +28,18 @@
 
 	leds {
 		compatible = "gpio-leds";
-		pmu_stat {
+		led-pmu-stat {
 			label = "beagleboard::pmu_stat";
 			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
 		};
 
-		heartbeat {
+		led-heartbeat {
 			label = "beagleboard::usr0";
 			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
 			linux,default-trigger = "heartbeat";
 		};
 
-		mmc {
+		led-mmc {
 			label = "beagleboard::usr1";
 			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
 			linux,default-trigger = "mmc0";
@@ -304,39 +304,6 @@
 	phys = <0 &hsusb2_phy>;
 };
 
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
-
 &twl_gpio {
 	ti,use-leds;
 	/* pullups: BIT(1) */
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
index 3b8349094baa..f25c0a84a190 100644
--- a/arch/arm/boot/dts/omap3-cm-t3517.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3517.dts
@@ -11,12 +11,12 @@
 	model = "CompuLab CM-T3517";
 	compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
 
-	vmmc:  regulator-vmmc {
-                compatible = "regulator-fixed";
-                regulator-name = "vmmc";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-        };
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
 	wl12xx_vmmc2: wl12xx_vmmc2 {
 		compatible = "regulator-fixed";
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index 48e48b0c8190..e1b1a047f77a 100644
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "CompuLab CM-T3730";
-	compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3";
 
 	wl12xx_vmmc2: wl12xx_vmmc2 {
 		compatible = "regulator-fixed";
diff --git a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
index 1ed837859374..0da759f8e2c2 100644
--- a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
@@ -1,16 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP3 SoC CPU thermal
  *
  * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/thermal/thermal.h>
 
-cpu_thermal: cpu_thermal {
+cpu_thermal: cpu-thermal {
 	polling-delay-passive = <250>; /* milliseconds */
 	polling-delay = <1000>; /* milliseconds */
 	coefficients = <0 20000>;
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 2c19d6e255bd..38aa1febc33f 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -15,28 +15,28 @@
 	leds {
 		compatible = "gpio-leds";
 
-		heartbeat {
+		led-heartbeat {
 			label = "devkit8000::led1";
 			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;	/* 186 -> LED1 */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		mmc {
+		led-mmc {
 			label = "devkit8000::led2";
 			gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;	/* 163 -> LED2 */
 			default-state = "on";
 			linux,default-trigger = "none";
 		};
 
-		usr {
+		led-usr {
 			label = "devkit8000::led3";
 			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* 164 -> LED3 */
 			default-state = "on";
 			linux,default-trigger = "usr";
 		};
 
-		pmu_stat {
+		led-pmu-stat {
 			label = "devkit8000::pmu_stat";
 			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
 		};
@@ -158,6 +158,24 @@
 	status = "disabled";
 };
 
+/* Unusable as clockevent because if unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
 &twl_gpio {
 	ti,use-leds;
 	/*
@@ -267,8 +285,8 @@
 		gpmc,mux-add-data = <0>;
 		gpmc,device-width = <1>;
 		gpmc,wait-pin = <0>;
-		gpmc,cycle2cycle-samecsen = <1>;
-		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
 
 		gpmc,cs-on-ns = <6>;
 		gpmc,cs-rd-off-ns = <180>;
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index c2995a280729..162d0726b008 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -14,36 +14,3 @@
 		display2 = &tv0;
 	};
 };
-
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts
index b9fd113979f2..06d2377d28ad 100644
--- a/arch/arm/boot/dts/omap3-echo.dts
+++ b/arch/arm/boot/dts/omap3-echo.dts
@@ -7,6 +7,7 @@
 #include "dm3725.dtsi"
 
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "Amazon Echo (first generation)";
@@ -139,179 +140,367 @@
 	clock-frequency = <400000>;
 
 	lp5523A: lp5523A@32 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		label = "q1";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-		enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
-
-		chan0 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan1 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan2 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan3 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan4 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan5 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan6 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan7 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan8 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
+		enable-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
+
+		multi-led@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@0 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x0>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@1 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@6 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x6>;
+				color = <LED_COLOR_ID_RED>;
+			};
+		};
+		multi-led@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@2 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@3 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x3>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@7 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x7>;
+				color = <LED_COLOR_ID_RED>;
+			};
+		};
+		multi-led@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@4 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x4>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@5 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x5>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@8 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x8>;
+				color = <LED_COLOR_ID_RED>;
+			};
 		};
 	};
 
 	lp5523B: lp5523B@33 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		label = "q3";
 		reg = <0x33>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
 
-		chan0 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan1 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan2 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan3 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan4 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan5 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan6 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan7 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan8 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
+		multi-led@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@0 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x0>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@1 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@6 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x6>;
+				color = <LED_COLOR_ID_RED>;
+			};
+		};
+		multi-led@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@2 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@3 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x3>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@7 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x7>;
+				color = <LED_COLOR_ID_RED>;
+			};
+		};
+		multi-led@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@4 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x4>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@5 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x5>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@8 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x8>;
+				color = <LED_COLOR_ID_RED>;
+			};
 		};
 	};
 
 	lp5523C: lp5523C@34 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		label = "q4";
 		reg = <0x34>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
 
-		chan0 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan1 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan2 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan3 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan4 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan5 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan6 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan7 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan8 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
+		multi-led@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@0 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x0>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@1 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@6 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x6>;
+				color = <LED_COLOR_ID_RED>;
+			};
+		};
+		multi-led@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@2 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@3 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x3>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@7 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x7>;
+				color = <LED_COLOR_ID_RED>;
+			};
+		};
+		multi-led@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@4 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x4>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@5 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x5>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@8 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x8>;
+				color = <LED_COLOR_ID_RED>;
+			};
 		};
 	};
 
 	lp5523D: lp552D@35 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		label = "q2";
 		reg = <0x35>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
 
-		chan0 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan1 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan2 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan3 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan4 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan5 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan6 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan7 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
-		};
-		chan8 {
-			led-cur = /bits/ 8 <12>;
-			max-cur = /bits/ 8 <15>;
+		multi-led@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@0 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x0>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@1 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@6 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x6>;
+				color = <LED_COLOR_ID_RED>;
+			};
+		};
+		multi-led@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@2 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@3 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x3>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@7 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x7>;
+				color = <LED_COLOR_ID_RED>;
+			};
+		};
+		multi-led@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+			color = <LED_COLOR_ID_RGB>;
+
+			led@4 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x4>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@5 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x5>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@8 {
+				led-cur = /bits/ 8 <12>;
+				max-cur = /bits/ 8 <15>;
+				reg = <0x8>;
+				color = <LED_COLOR_ID_RED>;
+			};
 		};
 	};
 };
@@ -417,6 +606,8 @@
 };
 
 &mmc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 	bus-width = <4>;
 	pinctrl-names = "default";
@@ -426,6 +617,11 @@
 	mmc-pwrseq = <&sdio_pwrseq>;
 	vmmc-supply = <&vcc3v3>;
 	vqmmc-supply = <&vcc1v8>;
+	atheros@0 {
+		compatible = "atheros,ath6kl";
+		reg = <0>;
+		bus-width = <4>;
+	};
 };
 
 &tps {
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index c9332195d096..abd403c228c7 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -60,7 +60,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name= "hynix,h8kds0un0mer-4em";
+		linux,mtd-name = "hynix,h8kds0un0mer-4em";
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
index b4109f48ec18..e6ba30a21166 100644
--- a/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-processor-common.dtsi
@@ -195,7 +195,7 @@
  * for bus switch SN74CB3Q3384A, level-shifter SN74AVC16T245DGGR, and 1.8V.
  */
 &gpio2 {
-	en_usb2_port {
+	en-usb2-port-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;	/* gpio_61 */
 		output-low;
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index 5cc0cf7cd16c..f95eea63b355 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -60,7 +60,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name= "micron,mt29f2g16abdhc";
+		linux,mtd-name = "micron,mt29f2g16abdhc";
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 938cc691bb2f..4183fde46059 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -11,8 +11,7 @@
 
 / {
 	model = "OMAP3 GTA04";
-	compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3";
-
+	compatible = "goldelico,gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3";
 	cpus {
 		cpu@0 {
 			cpu0-supply = <&vcc>;
@@ -31,6 +30,8 @@
 	aliases {
 		display0 = &lcd;
 		display1 = &tv0;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
 	};
 
 	ldo_3v3: fixedregulator {
@@ -104,16 +105,16 @@
 		#sound-dai-cells = <0>;
 	};
 
-	spi_lcd: spi_lcd {
+	spi_lcd: spi {
 		compatible = "spi-gpio";
 		#address-cells = <0x1>;
 		#size-cells = <0x0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi_gpio_pins>;
 
-		gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 
@@ -125,7 +126,7 @@
 			spi-cpol;
 			spi-cpha;
 
-			backlight= <&backlight>;
+			backlight = <&backlight>;
 			label = "lcd";
 			port {
 				lcd_in: endpoint {
@@ -145,7 +146,7 @@
 		pinctrl-0 = <&backlight_pins>;
 	};
 
-	pwm11: dmtimer-pwm {
+	pwm11: pwm-11 {
 		compatible = "ti,omap-dmtimer-pwm";
 		ti,timers = <&timer11>;
 		#pwm-cells = <3>;
@@ -330,7 +331,7 @@
 			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
 			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 		>;
-       };
+	};
 
 	gps_pins: pinmux_gps_pins {
 		pinctrl-single,pins = <
@@ -508,6 +509,8 @@
 		pinctrl-0 = <&bmp085_pins>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
+		vdda-supply = <&vio>;
+		vddd-supply = <&vio>;
 	};
 
 	/* accelerometer */
@@ -515,7 +518,7 @@
 		compatible = "bosch,bma180";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pintcrl-0 = <&bma180_pins>;
+		pinctrl-0 = <&bma180_pins>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
 	};
@@ -540,28 +543,29 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		gta04_led0: red_aux@0 {
+		gta04_led0: led@0 {
 			label = "gta04:red:aux";
 			reg = <0x0>;
 		};
 
-		gta04_led1: green_aux@1 {
+		gta04_led1: led@1 {
 			label = "gta04:green:aux";
 			reg = <0x1>;
 		};
 
-		gta04_led3: red_power@3 {
+		gta04_led3: led@3 {
 			label = "gta04:red:power";
 			reg = <0x3>;
 			linux,default-trigger = "default-on";
 		};
 
-		gta04_led4: green_power@4 {
+		gta04_led4: led@4 {
 			label = "gta04:green:power";
 			reg = <0x4>;
 		};
 
-		wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
+		wifi_reset: led@6 {
+			/* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
 			reg = <0x6>;
 			compatible = "gpio";
 		};
@@ -607,6 +611,22 @@
 	clock-frequency = <100000>;
 };
 
+&mcspi1 {
+	status = "disabled";
+};
+
+&mcspi2 {
+	status = "disabled";
+};
+
+&mcspi3 {
+	status = "disabled";
+};
+
+&mcspi4 {
+	status = "disabled";
+};
+
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
@@ -848,8 +868,8 @@
 };
 
 &hdqw1w {
-        pinctrl-names = "default";
-        pinctrl-0 = <&hdq_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdq_pins>;
 };
 
 /* image signal processor within OMAP3 SoC */
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
index fd84bbf3b9cc..425081201fd4 100644
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -37,7 +37,7 @@
 };
 
 &gpio5 {
-	irda_en {
+	irda-en-hog {
 		gpio-hog;
 		gpios = <(175-160) GPIO_ACTIVE_HIGH>;
 		output-high;	/* activate gpio_175 to disable IrDA receiver */
@@ -75,11 +75,16 @@
 		>;
 	};
 
+	bno050_pins: pinmux-bno050-pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT | MUX_MODE4) /* gpin113 */
+		>;
+	};
 };
 
 /*
  * for WL183x module see
- * Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+ * Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
  */
 
 &wifi_pwrseq {
@@ -115,17 +120,17 @@
 	/delete-node/ itg3200@68;
 	/delete-node/ hmc5843@1e;
 
-	bmg160@69 {
+	gyrometer@69 {
 		compatible = "bosch,bmg160";
 		reg = <0x69>;
 	};
 
-	bmc150@10 {
+	accelerometer@10 {
 		compatible = "bosch,bmc150_accel";
 		reg = <0x10>;
 	};
 
-	bmc150@12 {
+	magnetometer@12 {
 		compatible = "bosch,bmc150_magn";
 		reg = <0x12>;
 	};
@@ -133,5 +138,15 @@
 	bme280@76 {
 		compatible = "bosch,bme280";
 		reg = <0x76>;
+		vdda-supply = <&vio>;
+		vddd-supply = <&vio>;
+	};
+
+	imu@29 {
+		compatible = "bosch,bno055";
+		reg = <0x29>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bno050_pins>;
+		/* interrupt at &gpio4 17 */
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index 99f5585097a1..219202610463 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -111,7 +111,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name= "micron,mt29c4g96maz";
+		linux,mtd-name = "micron,mt29c4g96maz";
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
index 9dca5bfc87ab..eadb5b857f48 100644
--- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
+++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap3";
 
 	/* Regulator to trigger the WL_EN signal of the Wifi module */
 	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index c6f863bc03ad..3f0197ceae09 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap3";
 
 	vmmcsdio_fixed: fixedregulator-mmcsdio {
 		compatible = "regulator-fixed";
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
index 8e9c12cf51a7..bc95a8df2e6a 100644
--- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
+++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap3";
 
 	/* Regulator to trigger the WL_EN signal of the Wifi module */
 	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 5188f96f431e..d36ceecb7328 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -10,7 +10,7 @@
 
 / {
 	model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap3";
 
 	vmmcsdio_fixed: fixedregulator-mmcsdio {
 		compatible = "regulator-fixed";
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index 9c6a92724590..85f33bbb566f 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -103,7 +103,7 @@
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name= "micron,nand";
+		linux,mtd-name = "micron,nand";
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
@@ -215,11 +215,11 @@
 };
 
 &mmc2 {
-	status="disabled";
+	status = "disabled";
 };
 
 &mmc3 {
-	status="disabled";
+	status = "disabled";
 };
 
 &omap3_pmx_core {
@@ -301,5 +301,5 @@
 
 &vaux1 {
 	/* Needed for ads7846 */
-        regulator-name = "vcc";
+	regulator-name = "vcc";
 };
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index 73d477898ec2..c595afe4181d 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -372,7 +372,7 @@
 		gpmc,device-width = <2>;
 		gpmc,wait-pin = <0>;
 		gpmc,wait-monitoring-ns = <0>;
-		gpmc,burst-length= <4>;
+		gpmc,burst-length = <4>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <100>;
 		gpmc,cs-wr-off-ns = <100>;
diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
index ecb4ef738e07..f6bbea2be54c 100644
--- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts
+++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "INCOstartec LILLY-DBB056 (DM3730)";
-	compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap3";
 };
 
 &twl {
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
index d211bcc31174..a3cf3f443785 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -12,7 +12,7 @@
 
 / {
 	model = "Nokia N9";
-	compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap3";
 };
 
 &i2c2 {
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 32335d4ce478..f9f9eca0c56c 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -8,6 +8,8 @@
 
 #include "omap34xx.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/video-interfaces.h>
 
 /*
  * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
@@ -48,7 +50,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		heartbeat {
+		led-heartbeat {
 			label = "debug::sleep";
 			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;  /* 162 */
 			linux,default-trigger = "default-on";
@@ -155,7 +157,7 @@
 		io-channel-names = "temp", "bsi", "vbat";
 	};
 
-	pwm9: dmtimer-pwm {
+	pwm9: pwm-9 {
 		compatible = "ti,omap-dmtimer-pwm";
 		#pwm-cells = <3>;
 		ti,timers = <&timer9>;
@@ -193,7 +195,7 @@
 
 			csi_isp: endpoint {
 				remote-endpoint = <&csi_cam1>;
-				bus-type = <3>; /* CCP2 */
+				bus-type = <MEDIA_BUS_TYPE_CCP2>;
 				clock-lanes = <1>;
 				data-lanes = <0>;
 				lane-polarity = <0 0>;
@@ -235,27 +237,27 @@
 		pinctrl-single,pins = <
 
 			/* address lines */
-                        OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
-                        OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
-                        OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
+			OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
+			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
+			OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
 
 			/* data lines, gpmc_d0..d7 not muxable according to TRM */
-                        OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
-                        OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
-                        OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
-                        OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
-                        OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
-                        OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
-                        OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
-                        OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
+			OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
+			OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
+			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
+			OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
+			OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
+			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
+			OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
+			OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
 
 			/*
 			 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
 			 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
 			 */
-                        OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
-                        OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
-		>;
+			OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
+			OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
+			>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
@@ -567,8 +569,8 @@
 };
 
 &twl_gpio {
-	ti,pullups	= <0x0>;
-	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
+	ti,pullups = <0x0>;
+	ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
 };
 
 &i2c2 {
@@ -630,63 +632,92 @@
 	};
 
 	lp5523: lp5523@32 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+		enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
 
-		chan0 {
+		led@0 {
+			reg = <0>;
 			chan-name = "lp5523:kb1";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan1 {
+		led@1 {
+			reg = <1>;
 			chan-name = "lp5523:kb2";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan2 {
+		led@2 {
+			reg = <2>;
 			chan-name = "lp5523:kb3";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan3 {
+		led@3 {
+			reg = <3>;
 			chan-name = "lp5523:kb4";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan4 {
+		led@4 {
+			reg = <4>;
 			chan-name = "lp5523:b";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan5 {
+		led@5 {
+			reg = <5>;
 			chan-name = "lp5523:g";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan6 {
+		led@6 {
+			reg = <6>;
 			chan-name = "lp5523:r";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan7 {
+		led@7 {
+			reg = <7>;
 			chan-name = "lp5523:kb5";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan8 {
+		led@8 {
+			reg = <8>;
 			chan-name = "lp5523:kb6";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 	};
 
@@ -708,12 +739,12 @@
 
 	si4713: si4713@63 {
 		compatible = "silabs,si4713";
-                reg = <0x63>;
+		reg = <0x63>;
 
-                interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
-                reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
-                vio-supply = <&vio>;
-                vdd-supply = <&vaux1>;
+		interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
+		reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
+		vio-supply = <&vio>;
+		vdd-supply = <&vaux1>;
 	};
 
 	bq24150a: bq24150a@6b {
@@ -737,56 +768,20 @@
 
 	clock-frequency = <400000>;
 
-	lis302dl: lis3lv02d@1d {
-		compatible = "st,lis3lv02d";
+	accelerometer@1d {
+		compatible = "st,lis302dl";
 		reg = <0x1d>;
 
-		Vdd-supply = <&vaux1>;
-		Vdd_IO-supply = <&vio>;
+		vdd-supply = <&vaux1>;
+		vddio-supply = <&vio>;
 
 		interrupt-parent = <&gpio6>;
-		interrupts = <21 20>; /* 181 and 180 */
-
-		/* click flags */
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-
-		/* Limits are 0.5g * value */
-		st,click-threshold-x = <8>;
-		st,click-threshold-y = <8>;
-		st,click-threshold-z = <10>;
-
-		/* Click must be longer than time limit */
-		st,click-time-limit = <9>;
-
-		/* Kind of debounce filter */
-		st,click-latency = <50>;
-
-		/* Interrupt line 2 for click detection */
-		st,irq2-click;
-
-		st,wakeup-x-hi;
-		st,wakeup-y-hi;
-		st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
-
-		st,wakeup2-z-hi;
-		st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */
-
-		st,hipass1-disable;
-		st,hipass2-disable;
-
-		st,axis-x = <1>;    /* LIS3_DEV_X */
-		st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
-		st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
-
-		st,min-limit-x = <(-32)>;
-		st,min-limit-y = <3>;
-		st,min-limit-z = <3>;
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>,
+			     <20 IRQ_TYPE_EDGE_RISING>; /* 181 and 180 */
 
-		st,max-limit-x = <(-3)>;
-		st,max-limit-y = <32>;
-		st,max-limit-z = <32>;
+		mount-matrix =	 "-1",  "0",  "0",
+				  "0",  "1",  "0",
+				  "0",  "0",  "1";
 	};
 
 	cam1: camera@3e {
@@ -805,7 +800,7 @@
 
 		port {
 			csi_cam1: endpoint {
-				bus-type = <3>; /* CCP2 */
+				bus-type = <MEDIA_BUS_TYPE_CCP2>;
 				strobe = <1>;
 				clock-inv = <0>;
 				crc = <1>;
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 7dde9fbb06d3..f68da828b050 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -162,8 +162,8 @@
 };
 
 &twl_gpio {
-	ti,pullups	= <0x000001>; /* BIT(0) */
-	ti,pulldowns	= <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
+	ti,pullups = <0x000001>; /* BIT(0) */
+	ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
 };
 
 &vdac {
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
index b2f480022ff6..cbaf79c4e842 100644
--- a/arch/arm/boot/dts/omap3-n950.dts
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -12,7 +12,7 @@
 
 / {
 	model = "Nokia N950";
-	compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap3";
 
 	keys {
 		compatible = "gpio-keys";
diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
index bb932913c9e3..a6dbbba799b2 100644
--- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
@@ -17,19 +17,19 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		gpio148 {
+		led-gpio148 {
 			label = "overo:red:gpio148";
 			gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>;		/* gpio 148 */
 		};
-		gpio150 {
+		led-gpio150 {
 			label = "overo:yellow:gpio150";
 			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;		/* gpio 150 */
 		};
-		gpio151 {
+		led-gpio151 {
 			label = "overo:blue:gpio151";
 			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;		/* gpio 151 */
 		};
-		gpio170 {
+		led-gpio170 {
 			label = "overo:green:gpio170";
 			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;		/* gpio 170 */
 		};
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index 006a6d97231c..adc714c39825 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -222,7 +222,7 @@
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
-		linux,mtd-name= "micron,mt29c4g96maz";
+		linux,mtd-name = "micron,mt29c4g96maz";
 		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
index 2d2c61d7aa86..0d0e62c00916 100644
--- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -17,12 +17,12 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
 		};
-		gpio22 {
+		led-gpio22 {
 			label = "overo:blue:gpio22";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
 		};
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
index 155aec121400..5f6721326f86 100644
--- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
@@ -17,12 +17,12 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
 		};
-		gpio22 {
+		led-gpio22 {
 			label = "overo:blue:gpio22";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
 		};
diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
index 82a04466747a..4b66f622ac13 100644
--- a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
@@ -17,12 +17,12 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
 		};
-		gpio22 {
+		led-gpio22 {
 			label = "overo:blue:gpio22";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
 		};
diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
index 453a55324fa1..a8f163a899f0 100644
--- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
@@ -17,12 +17,12 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
 		};
-		gpio22 {
+		led-gpio22 {
 			label = "overo:blue:gpio22";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
 		};
diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
index 7f04dfad8203..3eb935df04dc 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts
@@ -14,5 +14,5 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35";
-	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
index bc5a04e03336..3af8d10d7224 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43";
-	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
index 065c31cbf0e2..813e3c9fe3b6 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43";
-	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
index e38c1c51392c..8405bd9262de 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35";
-	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
index e6dc23159c4d..b9558d736e79 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43";
-	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts
index 587c08ce282d..fcfc449f2abe 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit";
-	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
index f57de6010994..6d14466c180a 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts
@@ -14,6 +14,6 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
-	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
 
diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
index 281af6c113be..bcf20ff3f281 100644
--- a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
+++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts
@@ -14,5 +14,5 @@
 
 / {
 	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo";
-	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3";
 };
diff --git a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
index df7450f17ffd..ec03ca17e98b 100644
--- a/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-summit-common.dtsi
@@ -15,7 +15,7 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
index 9bf4b88a4b50..5432e4e16ab5 100644
--- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
@@ -13,7 +13,7 @@
 / {
 	leds {
 		compatible = "gpio-leds";
-		heartbeat {
+		led-heartbeat {
 			label = "overo:red:gpio21";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
index e5da3bc6f105..218a10c0d815 100644
--- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -22,7 +22,7 @@
 		compatible = "smsc,lan9221","smsc,lan9115";
 		bank-width = <2>;
 
-		gpmc,mux-add-data;
+		gpmc,mux-add-data = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <42>;
 		gpmc,cs-wr-off-ns = <36>;
diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
index ea509956d7ac..c0252f8a798a 100644
--- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts
+++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts
@@ -16,7 +16,7 @@
 / {
 	model = "Pandora Handheld Console 1GHz";
 
-	compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap3";
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index 37608af6c07f..559853764487 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -666,7 +666,7 @@
 
 	lcd: lcd@1 {
 		reg = <1>;	/* CS1 */
-		compatible =	"tpo,td043mtea1";
+		compatible = "tpo,td043mtea1";
 		spi-max-frequency = <100000>;
 		spi-cpol;
 		spi-cpha;
diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi
index fb9842fa922c..5ec0893415e0 100644
--- a/arch/arm/boot/dts/omap3-sb-t35.dtsi
+++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi
@@ -108,8 +108,8 @@
 		reg = <4 0 0xff>;
 		bank-width = <2>;
 		gpmc,device-width = <1>;
-		gpmc,cycle2cycle-samecsen = <1>;
-		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
 		gpmc,cs-on-ns = <5>;
 		gpmc,cs-rd-off-ns = <150>;
 		gpmc,cs-wr-off-ns = <150>;
diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts
index eb3893b9535e..4c36bde62491 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3730.dts
+++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "CompuLab SBC-T3730 with CM-T3730";
-	compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3";
 
 	aliases {
 		display0 = &dvi0;
diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts
index b6879cdc5c13..0591af494184 100644
--- a/arch/arm/boot/dts/omap3-sniper.dts
+++ b/arch/arm/boot/dts/omap3-sniper.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "LG Optimus Black";
-	compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap3";
 
 	cpus {
 		cpu@0 {
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index 580bfa1931c8..7f440d11f7e7 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -197,25 +197,11 @@
 &mcspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi1_pins>;
-
-	spidev@0 {
-		compatible = "spidev";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-cpha;
-	};
 };
 
 &mcspi3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi3_pins>;
-
-	spidev@0 {
-		compatible = "spidev";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-cpha;
-	};
 };
 
 #include "twl4030.dtsi"
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index 0482676d1830..ab52e8d68f76 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "TI Zoom3";
-	compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap36xx", "ti,omap3";
+	compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap3";
 
 	cpus {
 		cpu@0 {
@@ -23,9 +23,9 @@
 	};
 
 	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
 	};
 
 	vdd33a: regulator-vdd33a {
@@ -84,28 +84,28 @@
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
-                        OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
-                        OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
-                        OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
+			OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
 		>;
 	};
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-                        OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-                        OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
-                        OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-                        OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-                        OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-                        OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-                        OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
@@ -205,22 +205,22 @@
 };
 
 &uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
 };
 
 &uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
 };
 
 &uart3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
 };
 
 &uart4 {
-       status = "disabled";
+	status = "disabled";
 };
 
 &usb_otg_hs {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 9dcae1f2bc99..92cd4c99dae7 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP3 SoC
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/bus/ti-sysc.h>
@@ -24,6 +21,9 @@
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -400,8 +400,6 @@
 			compatible = "ti,omap3-i2c";
 			reg = <0x48070000 0x80>;
 			interrupts = <56>;
-			dmas = <&sdma 27 &sdma 28>;
-			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
@@ -411,8 +409,6 @@
 			compatible = "ti,omap3-i2c";
 			reg = <0x48072000 0x80>;
 			interrupts = <57>;
-			dmas = <&sdma 29 &sdma 30>;
-			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
@@ -422,8 +418,6 @@
 			compatible = "ti,omap3-i2c";
 			reg = <0x48060000 0x80>;
 			interrupts = <61>;
-			dmas = <&sdma 25 &sdma 26>;
-			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
@@ -437,7 +431,7 @@
 			#mbox-cells = <1>;
 			ti,mbox-num-users = <2>;
 			ti,mbox-num-fifos = <2>;
-			mbox_dsp: dsp {
+			mbox_dsp: mbox-dsp {
 				ti,mbox-tx = <0 0 0>;
 				ti,mbox-rx = <1 0 0>;
 			};
@@ -899,15 +893,37 @@
 			#gpio-cells = <2>;
 		};
 
-		usb_otg_hs: usb_otg_hs@480ab000 {
-			compatible = "ti,omap3-musb";
-			reg = <0x480ab000 0x1000>;
-			interrupts = <92>, <93>;
-			interrupt-names = "mc", "dma";
-			ti,hwmods = "usb_otg_hs";
-			multipoint = <1>;
-			num-eps = <16>;
-			ram-bits = <12>;
+		usb_otg_target: target-module@480ab000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x480ab400 0x4>,
+			      <0x480ab404 0x4>,
+			      <0x480ab408 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Clock defined in the SoC specific dtsi file */
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x480ab000 0x1000>;
+
+			usb_otg_hs: usb@0 {
+				compatible = "ti,omap3-musb";
+				reg = <0 0x1000>;
+				interrupts = <92>, <93>;
+				interrupt-names = "mc", "dma";
+				multipoint = <1>;
+				num-eps = <16>;
+				ram-bits = <12>;
+			};
 		};
 
 		dss: dss@48050000 {
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index c5b903718414..258ecd9e4519 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -53,7 +53,7 @@
 
 	nor@0,0 {
 		compatible = "cfi-flash";
-		linux,mtd-name= "intel,pf48f6000m0y1be";
+		linux,mtd-name = "intel,pf48f6000m0y1be";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0 0 0x08000000>;
@@ -101,11 +101,11 @@
 
 	nand@1,0 {
 		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
-		linux,mtd-name= "micron,mt29f1g08abb";
+		linux,mtd-name = "micron,mt29f1g08abb";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,nand-ecc-opt = "sw";
@@ -148,7 +148,7 @@
 	};
 
 	onenand@2,0 {
-		linux,mtd-name= "samsung,kfm2g16q2m-deb8";
+		linux,mtd-name = "samsung,kfm2g16q2m-deb8";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "ti,omap2-onenand";
diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
index 2ec3628d3315..24adfac26be0 100644
--- a/arch/arm/boot/dts/omap3430es1-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
@@ -46,37 +46,61 @@
 		ti,bit-shift = <2>;
 	};
 
-	d2d_26m_fck: d2d_26m_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <3>;
-	};
-
-	fshostusb_fck: fshostusb_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <5>;
-	};
-
-	ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <0>;
-		reg = <0x0a00>;
-	};
-
-	ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <8>;
-		reg = <0x0a40>;
-		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+	clock@a00 {
+		compatible = "ti,clksel";
+		reg = <0xa00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		d2d_26m_fck: clock-d2d-26m-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "d2d_26m_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <3>;
+		};
+
+		fshostusb_fck: clock-fshostusb-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "fshostusb_fck";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <5>;
+		};
+
+		ssi_ssr_gate_fck_3430es1: clock-ssi-ssr-gate-fck-3430es1 {
+			#clock-cells = <0>;
+			compatible = "ti,composite-no-wait-gate-clock";
+			clock-output-names = "ssi_ssr_gate_fck_3430es1";
+			clocks = <&corex2_fck>;
+			ti,bit-shift = <0>;
+		};
+	};
+
+	clock@a40 {
+		compatible = "ti,clksel";
+		reg = <0xa40>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		ssi_ssr_div_fck_3430es1: clock-ssi-ssr-div-fck-3430es1 {
+			#clock-cells = <0>;
+			compatible = "ti,composite-divider-clock";
+			clock-output-names = "ssi_ssr_div_fck_3430es1";
+			clocks = <&corex2_fck>;
+			ti,bit-shift = <8>;
+			ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+		};
+
+		usb_l4_div_ick: clock-usb-l4-div-ick {
+			#clock-cells = <0>;
+			compatible = "ti,composite-divider-clock";
+			clock-output-names = "usb_l4_div_ick";
+			clocks = <&l4_ick>;
+			ti,bit-shift = <4>;
+			ti,max-div = <1>;
+			ti,index-starts-at-one;
+		};
 	};
 
 	ssi_ssr_fck: ssi_ssr_fck_3430es1 {
@@ -93,20 +117,43 @@
 		clock-div = <2>;
 	};
 
-	hsotgusb_ick_3430es1: hsotgusb_ick_3430es1@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
-	};
-
-	fac_ick: fac_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <8>;
+	clock@a10 {
+		compatible = "ti,clksel";
+		reg = <0xa10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		hsotgusb_ick_3430es1: clock-hsotgusb-ick-3430es1 {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-no-wait-interface-clock";
+			clock-output-names = "hsotgusb_ick_3430es1";
+			clocks = <&core_l3_ick>;
+			ti,bit-shift = <4>;
+		};
+
+		fac_ick: clock-fac-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "fac_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <8>;
+		};
+
+		ssi_ick: clock-ssi-ick-3430es1 {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-no-wait-interface-clock";
+			clock-output-names = "ssi_ick_3430es1";
+			clocks = <&ssi_l4_ick>;
+			ti,bit-shift = <0>;
+		};
+
+		usb_l4_gate_ick: clock-usb-l4-gate-ick {
+			#clock-cells = <0>;
+			compatible = "ti,composite-interface-clock";
+			clock-output-names = "usb_l4_gate_ick";
+			clocks = <&l4_ick>;
+			ti,bit-shift = <5>;
+		};
 	};
 
 	ssi_l4_ick: ssi_l4_ick {
@@ -117,45 +164,26 @@
 		clock-div = <1>;
 	};
 
-	ssi_ick: ssi_ick_3430es1@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-no-wait-interface-clock";
-		clocks = <&ssi_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <0>;
-	};
-
-	usb_l4_gate_ick: usb_l4_gate_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-interface-clock";
-		clocks = <&l4_ick>;
-		ti,bit-shift = <5>;
-		reg = <0x0a10>;
-	};
-
-	usb_l4_div_ick: usb_l4_div_ick@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&l4_ick>;
-		ti,bit-shift = <4>;
-		ti,max-div = <1>;
-		reg = <0x0a40>;
-		ti,index-starts-at-one;
-	};
-
 	usb_l4_ick: usb_l4_ick {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
 	};
 
-	dss1_alwon_fck: dss1_alwon_fck_3430es1@e00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m4x2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0e00>;
-		ti,set-rate-parent;
+	clock@e00 {
+		compatible = "ti,clksel";
+		reg = <0xe00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		dss1_alwon_fck: clock-dss1-alwon-fck-3430es1 {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "dss1_alwon_fck_3430es1";
+			clocks = <&dpll4_m4x2_ck>;
+			ti,bit-shift = <0>;
+			ti,set-rate-parent;
+		};
 	};
 
 	dss_ick: dss_ick_3430es1@e10 {
diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
index 21079cdf2663..8374532f20e2 100644
--- a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
@@ -13,45 +13,76 @@
 		clock-div = <1>;
 	};
 
-	aes1_ick: aes1_ick@a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		ti,bit-shift = <3>;
-		reg = <0x0a14>;
-	};
+	clock@a14 {
+		compatible = "ti,clksel";
+		reg = <0xa14>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	rng_ick: rng_ick@a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x0a14>;
-		ti,bit-shift = <2>;
-	};
+		aes1_ick: clock-aes1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "aes1_ick";
+			clocks = <&security_l4_ick2>;
+			ti,bit-shift = <3>;
+		};
 
-	sha11_ick: sha11_ick@a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x0a14>;
-		ti,bit-shift = <1>;
-	};
+		rng_ick: clock-rng-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "rng_ick";
+			clocks = <&security_l4_ick2>;
+			ti,bit-shift = <2>;
+		};
 
-	des1_ick: des1_ick@a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l4_ick2>;
-		reg = <0x0a14>;
-		ti,bit-shift = <0>;
+		sha11_ick: clock-sha11-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "sha11_ick";
+			clocks = <&security_l4_ick2>;
+			ti,bit-shift = <1>;
+		};
+
+		des1_ick: clock-des1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "des1_ick";
+			clocks = <&security_l4_ick2>;
+			ti,bit-shift = <0>;
+		};
+
+		pka_ick: clock-pka-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "pka_ick";
+			clocks = <&security_l3_ick>;
+			ti,bit-shift = <4>;
+		};
 	};
 
-	cam_mclk: cam_mclk@f00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll4_m5x2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0f00>;
-		ti,set-rate-parent;
+	/* CM_FCLKEN_CAM */
+	clock@f00 {
+		compatible = "ti,clksel";
+		reg = <0xf00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		cam_mclk: clock-cam-mclk {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "cam_mclk";
+			clocks = <&dpll4_m5x2_ck>;
+			ti,bit-shift = <0>;
+			ti,set-rate-parent;
+		};
+
+		csi2_96m_fck: clock-csi2-96m-fck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "csi2_96m_fck";
+			clocks = <&core_96m_fck>;
+			ti,bit-shift = <1>;
+		};
 	};
 
 	cam_ick: cam_ick@f10 {
@@ -62,14 +93,6 @@
 		ti,bit-shift = <0>;
 	};
 
-	csi2_96m_fck: csi2_96m_fck@f00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0f00>;
-		ti,bit-shift = <1>;
-	};
-
 	security_l3_ick: security_l3_ick {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -78,44 +101,51 @@
 		clock-div = <1>;
 	};
 
-	pka_ick: pka_ick@a14 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&security_l3_ick>;
-		reg = <0x0a14>;
-		ti,bit-shift = <4>;
-	};
+	clock@a10 {
+		compatible = "ti,clksel";
+		reg = <0xa10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	icr_ick: icr_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <29>;
-	};
+		icr_ick: clock-icr-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "icr_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <29>;
+		};
 
-	des2_ick: des2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <26>;
-	};
+		des2_ick: clock-des2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "des2_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <26>;
+		};
 
-	mspro_ick: mspro_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <23>;
-	};
+		mspro_ick: clock-mspro-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mspro_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <23>;
+		};
 
-	mailboxes_ick: mailboxes_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <7>;
+		mailboxes_ick: clock-mailboxes-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mailboxes_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <7>;
+		};
+
+		sad2d_ick: clock-sad2d-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "sad2d_ick";
+			clocks = <&l3_ick>;
+			ti,bit-shift = <3>;
+		};
 	};
 
 	ssi_l4_ick: ssi_l4_ick {
@@ -126,20 +156,27 @@
 		clock-div = <1>;
 	};
 
-	sr1_fck: sr1_fck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <6>;
-	};
+	clock@c00 {
+		compatible = "ti,clksel";
+		reg = <0xc00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	sr2_fck: sr2_fck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <7>;
+		sr1_fck: clock-sr1-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "sr1_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <6>;
+		};
+
+		sr2_fck: clock-sr2-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "sr2_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <7>;
+		};
 	};
 
 	sr_l4_ick: sr_l4_ick {
@@ -187,37 +224,45 @@
 		ti,bit-shift = <0>;
 	};
 
-	modem_fck: modem_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <31>;
-	};
+	clock@a00 {
+		compatible = "ti,clksel";
+		reg = <0xa00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	sad2d_ick: sad2d_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <3>;
-	};
+		modem_fck: clock-modem-fck {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "modem_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <31>;
+		};
 
-	mad2d_ick: mad2d_ick@a18 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&l3_ick>;
-		reg = <0x0a18>;
-		ti,bit-shift = <3>;
+		mspro_fck: clock-mspro-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "mspro_fck";
+			clocks = <&core_96m_fck>;
+			ti,bit-shift = <23>;
+		};
 	};
 
-	mspro_fck: mspro_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <23>;
+	/* CM_ICLKEN3_CORE */
+	clock@a18 {
+		compatible = "ti,clksel";
+		reg = <0xa18>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		mad2d_ick: clock-mad2d-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mad2d_ick";
+			clocks = <&l3_ick>;
+			ti,bit-shift = <3>;
+		};
 	};
+
 };
 
 &cm_clockdomains {
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index feaa43b78535..9dbf62797f0f 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP34xx/OMAP35xx SoC
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/bus/ti-sysc.h>
@@ -24,7 +21,6 @@
 		};
 	};
 
-	/* see Documentation/devicetree/bindings/opp/opp.txt */
 	cpu0_opp_table: opp-table {
 		compatible = "operating-points-v2-ti-cpu";
 		syscon = <&scm_conf>;
@@ -193,6 +189,10 @@
 		      "ssi_ick";
 };
 
+&usb_otg_target {
+	clocks = <&hsotgusb_ick_3430es2>;
+};
+
 /include/ "omap34xx-omap36xx-clocks.dtsi"
 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
index 9974d5226971..dcc5cfcd1fe6 100644
--- a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
@@ -133,37 +133,66 @@
 		ti,bit-shift = <2>;
 	};
 
-	usbtll_ick: usbtll_ick@a18 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a18>;
-		ti,bit-shift = <2>;
+	/* CM_ICLKEN3_CORE */
+	clock@a18 {
+		compatible = "ti,clksel";
+		reg = <0xa18>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		usbtll_ick: clock-usbtll-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "usbtll_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <2>;
+		};
 	};
 
-	mmchs3_ick: mmchs3_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <30>;
+	clock@a10 {
+		compatible = "ti,clksel";
+		reg = <0xa10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		mmchs3_ick: clock-mmchs3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mmchs3_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <30>;
+		};
 	};
 
-	mmchs3_fck: mmchs3_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <30>;
+	clock@a00 {
+		compatible = "ti,clksel";
+		reg = <0xa00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		mmchs3_fck: clock-mmchs3-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "mmchs3_fck";
+			clocks = <&core_96m_fck>;
+			ti,bit-shift = <30>;
+		};
 	};
 
-	dss1_alwon_fck: dss1_alwon_fck_3430es2@e00 {
-		#clock-cells = <0>;
-		compatible = "ti,dss-gate-clock";
-		clocks = <&dpll4_m4x2_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0e00>;
-		ti,set-rate-parent;
+	clock@e00 {
+		compatible = "ti,clksel";
+		reg = <0xe00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		dss1_alwon_fck: clock-dss1-alwon-fck-3430es2 {
+			#clock-cells = <0>;
+			compatible = "ti,dss-gate-clock";
+			clock-output-names = "dss1_alwon_fck_3430es2";
+			clocks = <&dpll4_m4x2_ck>;
+			ti,bit-shift = <0>;
+			ti,set-rate-parent;
+		};
 	};
 
 	dss_ick: dss_ick_3430es2@e10 {
diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi
index 4e9cc9003594..c5fdb2bd765d 100644
--- a/arch/arm/boot/dts/omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi
@@ -58,12 +58,19 @@
 		ti,set-bit-to-disable;
 	};
 
-	uart4_fck: uart4_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&per_48m_fck>;
+	clock@1000 {
+		compatible = "ti,clksel";
 		reg = <0x1000>;
-		ti,bit-shift = <18>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		uart4_fck: clock-uart4-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "uart4_fck";
+			clocks = <&per_48m_fck>;
+			ti,bit-shift = <18>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
index 945537aee3ca..c94eb86d3da7 100644
--- a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
@@ -5,21 +5,35 @@
  * Copyright (C) 2013 Texas Instruments, Inc.
  */
 &cm_clocks {
-	ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <0>;
-		reg = <0x0a00>;
-	};
-
-	ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-divider-clock";
-		clocks = <&corex2_fck>;
-		ti,bit-shift = <8>;
-		reg = <0x0a40>;
-		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+	clock@a00 {
+		compatible = "ti,clksel";
+		reg = <0xa00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		ssi_ssr_gate_fck_3430es2: clock-ssi-ssr-gate-fck-3430es2 {
+			#clock-cells = <0>;
+			compatible = "ti,composite-no-wait-gate-clock";
+			clock-output-names = "ssi_ssr_gate_fck_3430es2";
+			clocks = <&corex2_fck>;
+			ti,bit-shift = <0>;
+		};
+	};
+
+	clock@a40 {
+		compatible = "ti,clksel";
+		reg = <0xa40>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		ssi_ssr_div_fck_3430es2: clock-ssi-ssr-div-fck-3430es2 {
+			#clock-cells = <0>;
+			compatible = "ti,composite-divider-clock";
+			clock-output-names = "ssi_ssr_div_fck_3430es2";
+			clocks = <&corex2_fck>;
+			ti,bit-shift = <8>;
+			ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+		};
 	};
 
 	ssi_ssr_fck: ssi_ssr_fck_3430es2 {
@@ -36,12 +50,27 @@
 		clock-div = <2>;
 	};
 
-	hsotgusb_ick_3430es2: hsotgusb_ick_3430es2@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-hsotgusb-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
+	clock@a10 {
+		compatible = "ti,clksel";
+		reg = <0xa10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		hsotgusb_ick_3430es2: clock-hsotgusb-ick-3430es2 {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-hsotgusb-interface-clock";
+			clock-output-names = "hsotgusb_ick_3430es2";
+			clocks = <&core_l3_ick>;
+			ti,bit-shift = <4>;
+		};
+
+		ssi_ick: clock-ssi-ick-3430es2 {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-ssi-interface-clock";
+			clock-output-names = "ssi_ick_3430es2";
+			clocks = <&ssi_l4_ick>;
+			ti,bit-shift = <0>;
+		};
 	};
 
 	ssi_l4_ick: ssi_l4_ick {
@@ -52,20 +81,19 @@
 		clock-div = <1>;
 	};
 
-	ssi_ick: ssi_ick_3430es2@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-ssi-interface-clock";
-		clocks = <&ssi_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <0>;
-	};
+	clock@c00 {
+		compatible = "ti,clksel";
+		reg = <0xc00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	usim_gate_fck: usim_gate_fck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&omap_96m_fck>;
-		ti,bit-shift = <9>;
-		reg = <0x0c00>;
+		usim_gate_fck: clock-usim-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "usim_gate_fck";
+			clocks = <&omap_96m_fck>;
+			ti,bit-shift = <9>;
+		};
 	};
 
 	sys_d2_ck: sys_d2_ck {
@@ -140,13 +168,20 @@
 		clock-div = <20>;
 	};
 
-	usim_mux_fck: usim_mux_fck@c40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x0c40>;
-		ti,index-starts-at-one;
+	clock@c40 {
+		compatible = "ti,clksel";
+		reg = <0xc40>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		usim_mux_fck: clock-usim-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "usim_mux_fck";
+			clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
+			ti,bit-shift = <3>;
+			ti,index-starts-at-one;
+		};
 	};
 
 	usim_fck: usim_fck {
@@ -155,12 +190,19 @@
 		clocks = <&usim_gate_fck>, <&usim_mux_fck>;
 	};
 
-	usim_ick: usim_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <9>;
+	clock@c10 {
+		compatible = "ti,clksel";
+		reg = <0xc10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		usim_ick: clock-usim-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "usim_ick";
+			clocks = <&wkup_l4_ick>;
+			ti,bit-shift = <9>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 20844dbc002e..fff9c3d34193 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP3 SoC
  *
  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/bus/ti-sysc.h>
@@ -29,7 +26,6 @@
 		};
 	};
 
-	/* see Documentation/devicetree/bindings/opp/opp.txt */
 	cpu0_opp_table: opp-table {
 		compatible = "operating-points-v2-ti-cpu";
 		syscon = <&scm_conf>;
@@ -244,6 +240,10 @@
 		      "ssi_ick";
 };
 
+&usb_otg_target {
+	clocks = <&hsotgusb_ick_3430es2>;
+};
+
 /include/ "omap34xx-omap36xx-clocks.dtsi"
 /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
 /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
index 0656c32439d2..2e13ca11ceea 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -78,12 +78,35 @@
 };
 
 &scm_clocks {
-	mcbsp5_mux_fck: mcbsp5_mux_fck@68 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <4>;
+	/* CONTROL_DEVCONF1 */
+	clock@68 {
+		compatible = "ti,clksel";
 		reg = <0x68>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		mcbsp5_mux_fck: clock-mcbsp5-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "mcbsp5_mux_fck";
+			clocks = <&core_96m_fck>, <&mcbsp_clks>;
+			ti,bit-shift = <4>;
+		};
+
+		mcbsp3_mux_fck: clock-mcbsp3-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "mcbsp3_mux_fck";
+			clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		};
+
+		mcbsp4_mux_fck: clock-mcbsp4-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "mcbsp4_mux_fck";
+			clocks = <&per_96m_fck>, <&mcbsp_clks>;
+			ti,bit-shift = <2>;
+		};
 	};
 
 	mcbsp5_fck: mcbsp5_fck {
@@ -92,12 +115,28 @@
 		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
 	};
 
-	mcbsp1_mux_fck: mcbsp1_mux_fck@4 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x04>;
+	/* CONTROL_DEVCONF0 */
+	clock@4 {
+		compatible = "ti,clksel";
+		reg = <0x4>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		mcbsp1_mux_fck: clock-mcbsp1-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "mcbsp1_mux_fck";
+			clocks = <&core_96m_fck>, <&mcbsp_clks>;
+			ti,bit-shift = <2>;
+		};
+
+		mcbsp2_mux_fck: clock-mcbsp2-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "mcbsp2_mux_fck";
+			clocks = <&per_96m_fck>, <&mcbsp_clks>;
+			ti,bit-shift = <6>;
+		};
 	};
 
 	mcbsp1_fck: mcbsp1_fck {
@@ -106,41 +145,18 @@
 		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
 	};
 
-	mcbsp2_mux_fck: mcbsp2_mux_fck@4 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <6>;
-		reg = <0x04>;
-	};
-
 	mcbsp2_fck: mcbsp2_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
 	};
 
-	mcbsp3_mux_fck: mcbsp3_mux_fck@68 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		reg = <0x68>;
-	};
-
 	mcbsp3_fck: mcbsp3_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
 	};
 
-	mcbsp4_mux_fck: mcbsp4_mux_fck@68 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&per_96m_fck>, <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x68>;
-	};
-
 	mcbsp4_fck: mcbsp4_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
@@ -238,14 +254,87 @@
 		reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>;
 	};
 
-	dpll3_m3_ck: dpll3_m3_ck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll3_ck>;
-		ti,bit-shift = <16>;
-		ti,max-div = <31>;
+	/* CM_CLKSEL1_EMU */
+	clock@1140 {
+		compatible = "ti,clksel";
 		reg = <0x1140>;
-		ti,index-starts-at-one;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		dpll3_m3_ck: clock-dpll3-m3 {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "dpll3_m3_ck";
+			clocks = <&dpll3_ck>;
+			ti,bit-shift = <16>;
+			ti,max-div = <31>;
+			ti,index-starts-at-one;
+		};
+
+		dpll4_m6_ck: clock-dpll4-m6 {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "dpll4_m6_ck";
+			clocks = <&dpll4_ck>;
+			ti,bit-shift = <24>;
+			ti,max-div = <63>;
+			ti,index-starts-at-one;
+		};
+
+		emu_src_mux_ck: clock-emu-src-mux {
+			#clock-cells = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "emu_src_mux_ck";
+			clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+		};
+
+		pclk_fck: clock-pclk-fck {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "pclk_fck";
+			clocks = <&emu_src_ck>;
+			ti,bit-shift = <8>;
+			ti,max-div = <7>;
+			ti,index-starts-at-one;
+		};
+
+		pclkx2_fck: clock-pclkx2-fck {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "pclkx2_fck";
+			clocks = <&emu_src_ck>;
+			ti,bit-shift = <6>;
+			ti,max-div = <3>;
+			ti,index-starts-at-one;
+		};
+
+		atclk_fck: clock-atclk-fck {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "atclk_fck";
+			clocks = <&emu_src_ck>;
+			ti,bit-shift = <4>;
+			ti,max-div = <3>;
+			ti,index-starts-at-one;
+		};
+
+		traceclk_src_fck: clock-traceclk-src-fck {
+			#clock-cells = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "traceclk_src_fck";
+			clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+			ti,bit-shift = <2>;
+		};
+
+		traceclk_fck: clock-traceclk-fck {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "traceclk_fck";
+			clocks = <&traceclk_src_fck>;
+			ti,bit-shift = <11>;
+			ti,max-div = <7>;
+			ti,index-starts-at-one;
+		};
 	};
 
 	dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck {
@@ -285,16 +374,6 @@
 		clock-frequency = <0x0>;
 	};
 
-	dpll3_m2_ck: dpll3_m2_ck@d40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll3_ck>;
-		ti,bit-shift = <27>;
-		ti,max-div = <31>;
-		reg = <0x0d40>;
-		ti,index-starts-at-one;
-	};
-
 	core_ck: core_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -345,22 +424,73 @@
 		clock-div = <1>;
 	};
 
-	omap_96m_fck: omap_96m_fck@d40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&cm_96m_fck>, <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0d40>;
-	};
-
-	dpll4_m3_ck: dpll4_m3_ck@e40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <32>;
-		reg = <0x0e40>;
-		ti,index-starts-at-one;
+	/* CM_CLKSEL1_PLL */
+	clock@d40 {
+		compatible = "ti,clksel";
+		reg = <0xd40>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		dpll3_m2_ck: clock-dpll3-m2 {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "dpll3_m2_ck";
+			clocks = <&dpll3_ck>;
+			ti,bit-shift = <27>;
+			ti,max-div = <31>;
+			ti,index-starts-at-one;
+		};
+
+		omap_96m_fck: clock-omap-96m-fck {
+			#clock-cells = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "omap_96m_fck";
+			clocks = <&cm_96m_fck>, <&sys_ck>;
+			ti,bit-shift = <6>;
+		};
+
+		omap_54m_fck: clock-omap-54m-fck {
+			#clock-cells = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "omap_54m_fck";
+			clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
+			ti,bit-shift = <5>;
+		};
+
+		omap_48m_fck: clock-omap-48m-fck {
+			#clock-cells = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "omap_48m_fck";
+			clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
+			ti,bit-shift = <3>;
+		};
+	};
+
+	/* CM_CLKSEL_DSS */
+	clock@e40 {
+		compatible = "ti,clksel";
+		reg = <0xe40>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		dpll4_m3_ck: clock-dpll4-m3 {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "dpll4_m3_ck";
+			clocks = <&dpll4_ck>;
+			ti,bit-shift = <8>;
+			ti,max-div = <32>;
+			ti,index-starts-at-one;
+		};
+
+		dpll4_m4_ck: clock-dpll4-m4 {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "dpll4_m4_ck";
+			clocks = <&dpll4_ck>;
+			ti,max-div = <16>;
+			ti,index-starts-at-one;
+		};
 	};
 
 	dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck {
@@ -380,14 +510,6 @@
 		ti,set-bit-to-disable;
 	};
 
-	omap_54m_fck: omap_54m_fck@d40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
-		ti,bit-shift = <5>;
-		reg = <0x0d40>;
-	};
-
 	cm_96m_d2_fck: cm_96m_d2_fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -396,14 +518,6 @@
 		clock-div = <2>;
 	};
 
-	omap_48m_fck: omap_48m_fck@d40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
-		ti,bit-shift = <3>;
-		reg = <0x0d40>;
-	};
-
 	omap_12m_fck: omap_12m_fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -412,15 +526,6 @@
 		clock-div = <4>;
 	};
 
-	dpll4_m4_ck: dpll4_m4_ck@e40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,max-div = <16>;
-		reg = <0x0e40>;
-		ti,index-starts-at-one;
-	};
-
 	dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
 		#clock-cells = <0>;
 		compatible = "ti,fixed-factor-clock";
@@ -468,16 +573,6 @@
 		ti,set-rate-parent;
 	};
 
-	dpll4_m6_ck: dpll4_m6_ck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll4_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <63>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
 	dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -503,19 +598,37 @@
 		clock-div = <1>;
 	};
 
-	clkout2_src_gate_ck: clkout2_src_gate_ck@d70 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-no-wait-gate-clock";
-		clocks = <&core_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0d70>;
-	};
-
-	clkout2_src_mux_ck: clkout2_src_mux_ck@d70 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
-		reg = <0x0d70>;
+	/* CM_CLKOUT_CTRL */
+	clock@d70 {
+		compatible = "ti,clksel";
+		reg = <0xd70>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		clkout2_src_gate_ck: clock-clkout2-src-gate {
+			#clock-cells = <0>;
+			compatible = "ti,composite-no-wait-gate-clock";
+			clock-output-names = "clkout2_src_gate_ck";
+			clocks = <&core_ck>;
+			ti,bit-shift = <7>;
+		};
+
+		clkout2_src_mux_ck: clock-clkout2-src-mux {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "clkout2_src_mux_ck";
+			clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
+		};
+
+		sys_clkout2: clock-sys-clkout2 {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "sys_clkout2";
+			clocks = <&clkout2_src_ck>;
+			ti,bit-shift = <3>;
+			ti,max-div = <64>;
+			ti,index-power-of-two;
+		};
 	};
 
 	clkout2_src_ck: clkout2_src_ck {
@@ -524,16 +637,6 @@
 		clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>;
 	};
 
-	sys_clkout2: sys_clkout2@d70 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&clkout2_src_ck>;
-		ti,bit-shift = <3>;
-		ti,max-div = <64>;
-		reg = <0x0d70>;
-		ti,index-power-of-two;
-	};
-
 	mpu_ck: mpu_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -558,49 +661,208 @@
 		clock-div = <1>;
 	};
 
-	l3_ick: l3_ick@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&core_ck>;
-		ti,max-div = <3>;
-		reg = <0x0a40>;
-		ti,index-starts-at-one;
-	};
-
-	l4_ick: l4_ick@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l3_ick>;
-		ti,bit-shift = <2>;
-		ti,max-div = <3>;
-		reg = <0x0a40>;
-		ti,index-starts-at-one;
-	};
-
-	rm_ick: rm_ick@c40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&l4_ick>;
-		ti,bit-shift = <1>;
-		ti,max-div = <3>;
-		reg = <0x0c40>;
-		ti,index-starts-at-one;
-	};
-
-	gpt10_gate_fck: gpt10_gate_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x0a00>;
-	};
-
-	gpt10_mux_fck: gpt10_mux_fck@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x0a40>;
+	/* CM_CLKSEL_CORE */
+	clock@a40 {
+		compatible = "ti,clksel";
+		reg = <0xa40>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		l3_ick: clock-l3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "l3_ick";
+			clocks = <&core_ck>;
+			ti,max-div = <3>;
+			ti,index-starts-at-one;
+		};
+
+		l4_ick: clock-l4-ick {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "l4_ick";
+			clocks = <&l3_ick>;
+			ti,bit-shift = <2>;
+			ti,max-div = <3>;
+			ti,index-starts-at-one;
+		};
+
+		gpt10_mux_fck: clock-gpt10-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt10_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <6>;
+		};
+
+		gpt11_mux_fck: clock-gpt11-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt11_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <7>;
+		};
+	};
+
+	/* CM_CLKSEL_WKUP */
+	clock@c40 {
+		compatible = "ti,clksel";
+		reg = <0xc40>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		rm_ick: clock-rm-ick {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "rm_ick";
+			clocks = <&l4_ick>;
+			ti,bit-shift = <1>;
+			ti,max-div = <3>;
+			ti,index-starts-at-one;
+		};
+
+		gpt1_mux_fck: clock-gpt1-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt1_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+		};
+	};
+
+	/* CM_FCLKEN1_CORE */
+	clock@a00 {
+		compatible = "ti,clksel";
+		reg = <0xa00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		gpt10_gate_fck: clock-gpt10-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt10_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <11>;
+		};
+
+		gpt11_gate_fck: clock-gpt11-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt11_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <12>;
+		};
+
+		mmchs2_fck: clock-mmchs2-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "mmchs2_fck";
+			clocks = <&core_96m_fck>;
+			ti,bit-shift = <25>;
+		};
+
+		mmchs1_fck: clock-mmchs1-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "mmchs1_fck";
+			clocks = <&core_96m_fck>;
+			ti,bit-shift = <24>;
+		};
+
+		i2c3_fck: clock-i2c3-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "i2c3_fck";
+			clocks = <&core_96m_fck>;
+			ti,bit-shift = <17>;
+		};
+
+		i2c2_fck: clock-i2c2-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "i2c2_fck";
+			clocks = <&core_96m_fck>;
+			ti,bit-shift = <16>;
+		};
+
+		i2c1_fck: clock-i2c1-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "i2c1_fck";
+			clocks = <&core_96m_fck>;
+			ti,bit-shift = <15>;
+		};
+
+		mcbsp5_gate_fck: clock-mcbsp5-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "mcbsp5_gate_fck";
+			clocks = <&mcbsp_clks>;
+			ti,bit-shift = <10>;
+		};
+
+		mcbsp1_gate_fck: clock-mcbsp1-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "mcbsp1_gate_fck";
+			clocks = <&mcbsp_clks>;
+			ti,bit-shift = <9>;
+		};
+
+		mcspi4_fck: clock-mcspi4-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "mcspi4_fck";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <21>;
+		};
+
+		mcspi3_fck: clock-mcspi3-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "mcspi3_fck";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <20>;
+		};
+
+		mcspi2_fck: clock-mcspi2-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "mcspi2_fck";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <19>;
+		};
+
+		mcspi1_fck: clock-mcspi1-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "mcspi1_fck";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <18>;
+		};
+
+		uart2_fck: clock-uart2-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "uart2_fck";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <14>;
+		};
+
+		uart1_fck: clock-uart1-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "uart1_fck";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <13>;
+		};
+
+		hdq_fck: clock-hdq-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "hdq_fck";
+			clocks = <&core_12m_fck>;
+			ti,bit-shift = <22>;
+		};
 	};
 
 	gpt10_fck: gpt10_fck {
@@ -609,22 +871,6 @@
 		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
 	};
 
-	gpt11_gate_fck: gpt11_gate_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <12>;
-		reg = <0x0a00>;
-	};
-
-	gpt11_mux_fck: gpt11_mux_fck@a40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0a40>;
-	};
-
 	gpt11_fck: gpt11_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
@@ -639,62 +885,6 @@
 		clock-div = <1>;
 	};
 
-	mmchs2_fck: mmchs2_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <25>;
-	};
-
-	mmchs1_fck: mmchs1_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <24>;
-	};
-
-	i2c3_fck: i2c3_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <17>;
-	};
-
-	i2c2_fck: i2c2_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <16>;
-	};
-
-	i2c1_fck: i2c1_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_96m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <15>;
-	};
-
-	mcbsp5_gate_fck: mcbsp5_gate_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <10>;
-		reg = <0x0a00>;
-	};
-
-	mcbsp1_gate_fck: mcbsp1_gate_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <9>;
-		reg = <0x0a00>;
-	};
-
 	core_48m_fck: core_48m_fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -703,54 +893,6 @@
 		clock-div = <1>;
 	};
 
-	mcspi4_fck: mcspi4_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <21>;
-	};
-
-	mcspi3_fck: mcspi3_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <20>;
-	};
-
-	mcspi2_fck: mcspi2_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <19>;
-	};
-
-	mcspi1_fck: mcspi1_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <18>;
-	};
-
-	uart2_fck: uart2_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <14>;
-	};
-
-	uart1_fck: uart1_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <13>;
-	};
-
 	core_12m_fck: core_12m_fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -759,14 +901,6 @@
 		clock-div = <1>;
 	};
 
-	hdq_fck: hdq_fck@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_12m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <22>;
-	};
-
 	core_l3_ick: core_l3_ick {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -775,12 +909,172 @@
 		clock-div = <1>;
 	};
 
-	sdrc_ick: sdrc_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <1>;
+	/* CM_ICLKEN1_CORE */
+	clock@a10 {
+		compatible = "ti,clksel";
+		reg = <0xa10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		sdrc_ick: clock-sdrc-ick {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "sdrc_ick";
+			clocks = <&core_l3_ick>;
+			ti,bit-shift = <1>;
+		};
+
+		mmchs2_ick: clock-mmchs2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mmchs2_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <25>;
+		};
+
+		mmchs1_ick: clock-mmchs1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mmchs1_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <24>;
+		};
+
+		hdq_ick: clock-hdq-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "hdq_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <22>;
+		};
+
+		mcspi4_ick: clock-mcspi4-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcspi4_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <21>;
+		};
+
+		mcspi3_ick: clock-mcspi3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcspi3_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <20>;
+		};
+
+		mcspi2_ick: clock-mcspi2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcspi2_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <19>;
+		};
+
+		mcspi1_ick: clock-mcspi1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcspi1_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <18>;
+		};
+
+		i2c3_ick: clock-i2c3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "i2c3_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <17>;
+		};
+
+		i2c2_ick: clock-i2c2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "i2c2_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <16>;
+		};
+
+		i2c1_ick: clock-i2c1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "i2c1_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <15>;
+		};
+
+		uart2_ick: clock-uart2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "uart2_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <14>;
+		};
+
+		uart1_ick: clock-uart1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "uart1_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <13>;
+		};
+
+		gpt11_ick: clock-gpt11-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt11_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <12>;
+		};
+
+		gpt10_ick: clock-gpt10-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt10_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <11>;
+		};
+
+		mcbsp5_ick: clock-mcbsp5-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcbsp5_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <10>;
+		};
+
+		mcbsp1_ick: clock-mcbsp1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcbsp1_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <9>;
+		};
+
+		omapctrl_ick: clock-omapctrl-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "omapctrl_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <6>;
+		};
+
+		aes2_ick: clock-aes2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "aes2_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <28>;
+		};
+
+		sha12_ick: clock-sha12-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "sha12_ick";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <27>;
+		};
 	};
 
 	gpmc_fck: gpmc_fck {
@@ -799,164 +1093,36 @@
 		clock-div = <1>;
 	};
 
-	mmchs2_ick: mmchs2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <25>;
-	};
-
-	mmchs1_ick: mmchs1_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <24>;
-	};
-
-	hdq_ick: hdq_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <22>;
-	};
-
-	mcspi4_ick: mcspi4_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <21>;
-	};
-
-	mcspi3_ick: mcspi3_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <20>;
-	};
-
-	mcspi2_ick: mcspi2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <19>;
-	};
-
-	mcspi1_ick: mcspi1_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <18>;
-	};
-
-	i2c3_ick: i2c3_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <17>;
-	};
-
-	i2c2_ick: i2c2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <16>;
-	};
-
-	i2c1_ick: i2c1_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <15>;
-	};
-
-	uart2_ick: uart2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <14>;
-	};
-
-	uart1_ick: uart1_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <13>;
-	};
-
-	gpt11_ick: gpt11_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <12>;
-	};
-
-	gpt10_ick: gpt10_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <11>;
-	};
-
-	mcbsp5_ick: mcbsp5_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <10>;
-	};
-
-	mcbsp1_ick: mcbsp1_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <9>;
-	};
-
-	omapctrl_ick: omapctrl_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <6>;
-	};
-
-	dss_tv_fck: dss_tv_fck@e00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&omap_54m_fck>;
-		reg = <0x0e00>;
-		ti,bit-shift = <2>;
-	};
-
-	dss_96m_fck: dss_96m_fck@e00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&omap_96m_fck>;
-		reg = <0x0e00>;
-		ti,bit-shift = <2>;
-	};
-
-	dss2_alwon_fck: dss2_alwon_fck@e00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x0e00>;
-		ti,bit-shift = <1>;
+	/* CM_FCLKEN_DSS */
+	clock@e00 {
+		compatible = "ti,clksel";
+		reg = <0xe00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		dss_tv_fck: clock-dss-tv-fck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "dss_tv_fck";
+			clocks = <&omap_54m_fck>;
+			ti,bit-shift = <2>;
+		};
+
+		dss_96m_fck: clock-dss-96m-fck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "dss_96m_fck";
+			clocks = <&omap_96m_fck>;
+			ti,bit-shift = <2>;
+		};
+
+		dss2_alwon_fck: clock-dss2-alwon-fck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "dss2_alwon_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <1>;
+		};
 	};
 
 	dummy_ck: dummy_ck {
@@ -965,19 +1131,36 @@
 		clock-frequency = <0>;
 	};
 
-	gpt1_gate_fck: gpt1_gate_fck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <0>;
-		reg = <0x0c00>;
-	};
-
-	gpt1_mux_fck: gpt1_mux_fck@c40 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		reg = <0x0c40>;
+	/* CM_FCLKEN_WKUP */
+	clock@c00 {
+		compatible = "ti,clksel";
+		reg = <0xc00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		gpt1_gate_fck: clock-gpt1-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt1_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <0>;
+		};
+
+		gpio1_dbck: clock-gpio1-dbck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "gpio1_dbck";
+			clocks = <&wkup_32k_fck>;
+			ti,bit-shift = <3>;
+		};
+
+		wdt2_fck: clock-wdt2-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "wdt2_fck";
+			clocks = <&wkup_32k_fck>;
+			ti,bit-shift = <5>;
+		};
 	};
 
 	gpt1_fck: gpt1_fck {
@@ -986,14 +1169,6 @@
 		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
 	};
 
-	aes2_ick: aes2_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		ti,bit-shift = <28>;
-		reg = <0x0a10>;
-	};
-
 	wkup_32k_fck: wkup_32k_fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -1002,76 +1177,60 @@
 		clock-div = <1>;
 	};
 
-	gpio1_dbck: gpio1_dbck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&wkup_32k_fck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <3>;
-	};
-
-	sha12_ick: sha12_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <27>;
-	};
-
-	wdt2_fck: wdt2_fck@c00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&wkup_32k_fck>;
-		reg = <0x0c00>;
-		ti,bit-shift = <5>;
-	};
-
-	wdt2_ick: wdt2_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <5>;
-	};
-
-	wdt1_ick: wdt1_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <4>;
-	};
-
-	gpio1_ick: gpio1_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <3>;
-	};
-
-	omap_32ksync_ick: omap_32ksync_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <2>;
-	};
-
-	gpt12_ick: gpt12_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <1>;
-	};
-
-	gpt1_ick: gpt1_ick@c10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&wkup_l4_ick>;
-		reg = <0x0c10>;
-		ti,bit-shift = <0>;
+	/* CM_ICLKEN_WKUP */
+	clock@c10 {
+		compatible = "ti,clksel";
+		reg = <0xc10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		wdt2_ick: clock-wdt2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "wdt2_ick";
+			clocks = <&wkup_l4_ick>;
+			ti,bit-shift = <5>;
+		};
+
+		wdt1_ick: clock-wdt1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "wdt1_ick";
+			clocks = <&wkup_l4_ick>;
+			ti,bit-shift = <4>;
+		};
+
+		gpio1_ick: clock-gpio1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpio1_ick";
+			clocks = <&wkup_l4_ick>;
+			ti,bit-shift = <3>;
+		};
+
+		omap_32ksync_ick: clock-omap-32ksync-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "omap_32ksync_ick";
+			clocks = <&wkup_l4_ick>;
+			ti,bit-shift = <2>;
+		};
+
+		gpt12_ick: clock-gpt12-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt12_ick";
+			clocks = <&wkup_l4_ick>;
+			ti,bit-shift = <1>;
+		};
+
+		gpt1_ick: clock-gpt1-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt1_ick";
+			clocks = <&wkup_l4_ick>;
+			ti,bit-shift = <0>;
+		};
 	};
 
 	per_96m_fck: per_96m_fck {
@@ -1090,27 +1249,227 @@
 		clock-div = <1>;
 	};
 
-	uart3_fck: uart3_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&per_48m_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <11>;
-	};
-
-	gpt2_gate_fck: gpt2_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <3>;
+	/* CM_FCLKEN_PER */
+	clock@1000 {
+		compatible = "ti,clksel";
 		reg = <0x1000>;
-	};
-
-	gpt2_mux_fck: gpt2_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		uart3_fck: clock-uart3-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "uart3_fck";
+			clocks = <&per_48m_fck>;
+			ti,bit-shift = <11>;
+		};
+
+		gpt2_gate_fck: clock-gpt2-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt2_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <3>;
+		};
+
+		gpt3_gate_fck: clock-gpt3-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt3_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <4>;
+		};
+
+		gpt4_gate_fck: clock-gpt4-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt4_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <5>;
+		};
+
+		gpt5_gate_fck: clock-gpt5-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt5_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <6>;
+		};
+
+		gpt6_gate_fck: clock-gpt6-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt6_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <7>;
+		};
+
+		gpt7_gate_fck: clock-gpt7-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt7_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <8>;
+		};
+
+		gpt8_gate_fck: clock-gpt8-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt8_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <9>;
+		};
+
+		gpt9_gate_fck: clock-gpt9-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "gpt9_gate_fck";
+			clocks = <&sys_ck>;
+			ti,bit-shift = <10>;
+		};
+
+		gpio6_dbck: clock-gpio6-dbck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "gpio6_dbck";
+			clocks = <&per_32k_alwon_fck>;
+			ti,bit-shift = <17>;
+		};
+
+		gpio5_dbck: clock-gpio5-dbck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "gpio5_dbck";
+			clocks = <&per_32k_alwon_fck>;
+			ti,bit-shift = <16>;
+		};
+
+		gpio4_dbck: clock-gpio4-dbck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "gpio4_dbck";
+			clocks = <&per_32k_alwon_fck>;
+			ti,bit-shift = <15>;
+		};
+
+		gpio3_dbck: clock-gpio3-dbck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "gpio3_dbck";
+			clocks = <&per_32k_alwon_fck>;
+			ti,bit-shift = <14>;
+		};
+
+		gpio2_dbck: clock-gpio2-dbck {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "gpio2_dbck";
+			clocks = <&per_32k_alwon_fck>;
+			ti,bit-shift = <13>;
+		};
+
+		wdt3_fck: clock-wdt3-fck {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "wdt3_fck";
+			clocks = <&per_32k_alwon_fck>;
+			ti,bit-shift = <12>;
+		};
+
+		mcbsp2_gate_fck: clock-mcbsp2-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "mcbsp2_gate_fck";
+			clocks = <&mcbsp_clks>;
+			ti,bit-shift = <0>;
+		};
+
+		mcbsp3_gate_fck: clock-mcbsp3-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "mcbsp3_gate_fck";
+			clocks = <&mcbsp_clks>;
+			ti,bit-shift = <1>;
+		};
+
+		mcbsp4_gate_fck: clock-mcbsp4-gate-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-gate-clock";
+			clock-output-names = "mcbsp4_gate_fck";
+			clocks = <&mcbsp_clks>;
+			ti,bit-shift = <2>;
+		};
+	};
+
+	/* CM_CLKSEL_PER */
+	clock@1040 {
+		compatible = "ti,clksel";
 		reg = <0x1040>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		gpt2_mux_fck: clock-gpt2-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt2_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+		};
+
+		gpt3_mux_fck: clock-gpt3-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt3_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <1>;
+		};
+
+		gpt4_mux_fck: clock-gpt4-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt4_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <2>;
+		};
+
+		gpt5_mux_fck: clock-gpt5-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt5_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <3>;
+		};
+
+		gpt6_mux_fck: clock-gpt6-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt6_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <4>;
+		};
+
+		gpt7_mux_fck: clock-gpt7-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt7_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <5>;
+		};
+
+		gpt8_mux_fck: clock-gpt8-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt8_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <6>;
+		};
+
+		gpt9_mux_fck: clock-gpt9-mux-fck {
+			#clock-cells = <0>;
+			compatible = "ti,composite-mux-clock";
+			clock-output-names = "gpt9_mux_fck";
+			clocks = <&omap_32k_fck>, <&sys_ck>;
+			ti,bit-shift = <7>;
+		};
 	};
 
 	gpt2_fck: gpt2_fck {
@@ -1119,154 +1478,42 @@
 		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
 	};
 
-	gpt3_gate_fck: gpt3_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x1000>;
-	};
-
-	gpt3_mux_fck: gpt3_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x1040>;
-	};
-
 	gpt3_fck: gpt3_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
 	};
 
-	gpt4_gate_fck: gpt4_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x1000>;
-	};
-
-	gpt4_mux_fck: gpt4_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x1040>;
-	};
-
 	gpt4_fck: gpt4_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
 	};
 
-	gpt5_gate_fck: gpt5_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x1000>;
-	};
-
-	gpt5_mux_fck: gpt5_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x1040>;
-	};
-
 	gpt5_fck: gpt5_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
 	};
 
-	gpt6_gate_fck: gpt6_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x1000>;
-	};
-
-	gpt6_mux_fck: gpt6_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <4>;
-		reg = <0x1040>;
-	};
-
 	gpt6_fck: gpt6_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
 	};
 
-	gpt7_gate_fck: gpt7_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1000>;
-	};
-
-	gpt7_mux_fck: gpt7_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <5>;
-		reg = <0x1040>;
-	};
-
 	gpt7_fck: gpt7_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
 	};
 
-	gpt8_gate_fck: gpt8_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <9>;
-		reg = <0x1000>;
-	};
-
-	gpt8_mux_fck: gpt8_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x1040>;
-	};
-
 	gpt8_fck: gpt8_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
 		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
 	};
 
-	gpt9_gate_fck: gpt9_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&sys_ck>;
-		ti,bit-shift = <10>;
-		reg = <0x1000>;
-	};
-
-	gpt9_mux_fck: gpt9_mux_fck@1040 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-mux-clock";
-		clocks = <&omap_32k_fck>, <&sys_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x1040>;
-	};
-
 	gpt9_fck: gpt9_fck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
@@ -1281,54 +1528,6 @@
 		clock-div = <1>;
 	};
 
-	gpio6_dbck: gpio6_dbck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <17>;
-	};
-
-	gpio5_dbck: gpio5_dbck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <16>;
-	};
-
-	gpio4_dbck: gpio4_dbck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <15>;
-	};
-
-	gpio3_dbck: gpio3_dbck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <14>;
-	};
-
-	gpio2_dbck: gpio2_dbck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <13>;
-	};
-
-	wdt3_fck: wdt3_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&per_32k_alwon_fck>;
-		reg = <0x1000>;
-		ti,bit-shift = <12>;
-	};
-
 	per_l4_ick: per_l4_ick {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
@@ -1337,187 +1536,164 @@
 		clock-div = <1>;
 	};
 
-	gpio6_ick: gpio6_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <17>;
-	};
-
-	gpio5_ick: gpio5_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <16>;
-	};
-
-	gpio4_ick: gpio4_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <15>;
-	};
-
-	gpio3_ick: gpio3_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <14>;
-	};
-
-	gpio2_ick: gpio2_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <13>;
-	};
-
-	wdt3_ick: wdt3_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <12>;
-	};
-
-	uart3_ick: uart3_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <11>;
-	};
-
-	uart4_ick: uart4_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <18>;
-	};
-
-	gpt9_ick: gpt9_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <10>;
-	};
-
-	gpt8_ick: gpt8_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <9>;
-	};
-
-	gpt7_ick: gpt7_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <8>;
-	};
-
-	gpt6_ick: gpt6_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <7>;
-	};
-
-	gpt5_ick: gpt5_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <6>;
-	};
-
-	gpt4_ick: gpt4_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <5>;
-	};
-
-	gpt3_ick: gpt3_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <4>;
-	};
-
-	gpt2_ick: gpt2_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <3>;
-	};
-
-	mcbsp2_ick: mcbsp2_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <0>;
-	};
-
-	mcbsp3_ick: mcbsp3_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
-		reg = <0x1010>;
-		ti,bit-shift = <1>;
-	};
-
-	mcbsp4_ick: mcbsp4_ick@1010 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&per_l4_ick>;
+	/* CM_ICLKEN_PER */
+	clock@1010 {
+		compatible = "ti,clksel";
 		reg = <0x1010>;
-		ti,bit-shift = <2>;
-	};
-
-	mcbsp2_gate_fck: mcbsp2_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <0>;
-		reg = <0x1000>;
-	};
-
-	mcbsp3_gate_fck: mcbsp3_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <1>;
-		reg = <0x1000>;
-	};
-
-	mcbsp4_gate_fck: mcbsp4_gate_fck@1000 {
-		#clock-cells = <0>;
-		compatible = "ti,composite-gate-clock";
-		clocks = <&mcbsp_clks>;
-		ti,bit-shift = <2>;
-		reg = <0x1000>;
-	};
-
-	emu_src_mux_ck: emu_src_mux_ck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
-		reg = <0x1140>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		gpio6_ick: clock-gpio6-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpio6_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <17>;
+		};
+
+		gpio5_ick: clock-gpio5-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpio5_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <16>;
+		};
+
+		gpio4_ick: clock-gpio4-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpio4_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <15>;
+		};
+
+		gpio3_ick: clock-gpio3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpio3_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <14>;
+		};
+
+		gpio2_ick: clock-gpio2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpio2_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <13>;
+		};
+
+		wdt3_ick: clock-wdt3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "wdt3_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <12>;
+		};
+
+		uart3_ick: clock-uart3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "uart3_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <11>;
+		};
+
+		uart4_ick: clock-uart4-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "uart4_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <18>;
+		};
+
+		gpt9_ick: clock-gpt9-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt9_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <10>;
+		};
+
+		gpt8_ick: clock-gpt8-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt8_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <9>;
+		};
+
+		gpt7_ick: clock-gpt7-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt7_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <8>;
+		};
+
+		gpt6_ick: clock-gpt6-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt6_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <7>;
+		};
+
+		gpt5_ick: clock-gpt5-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt5_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <6>;
+		};
+
+		gpt4_ick: clock-gpt4-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt4_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <5>;
+		};
+
+		gpt3_ick: clock-gpt3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt3_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <4>;
+		};
+
+		gpt2_ick: clock-gpt2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "gpt2_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <3>;
+		};
+
+		mcbsp2_ick: clock-mcbsp2-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcbsp2_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <0>;
+		};
+
+		mcbsp3_ick: clock-mcbsp3-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcbsp3_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <1>;
+		};
+
+		mcbsp4_ick: clock-mcbsp4-ick {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "mcbsp4_ick";
+			clocks = <&per_l4_ick>;
+			ti,bit-shift = <2>;
+		};
 	};
 
 	emu_src_ck: emu_src_ck {
@@ -1526,54 +1702,6 @@
 		clocks = <&emu_src_mux_ck>;
 	};
 
-	pclk_fck: pclk_fck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&emu_src_ck>;
-		ti,bit-shift = <8>;
-		ti,max-div = <7>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	pclkx2_fck: pclkx2_fck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&emu_src_ck>;
-		ti,bit-shift = <6>;
-		ti,max-div = <3>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	atclk_fck: atclk_fck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&emu_src_ck>;
-		ti,bit-shift = <4>;
-		ti,max-div = <3>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
-	traceclk_src_fck: traceclk_src_fck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
-		ti,bit-shift = <2>;
-		reg = <0x1140>;
-	};
-
-	traceclk_fck: traceclk_fck@1140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&traceclk_src_fck>;
-		ti,bit-shift = <11>;
-		ti,max-div = <7>;
-		reg = <0x1140>;
-		ti,index-starts-at-one;
-	};
-
 	secure_32k_fck: secure_32k_fck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
index 03d054b2bf9a..801b4f10350c 100644
--- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP4/5 SoC CPU thermal
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/thermal/thermal.h>
@@ -16,20 +13,20 @@ cpu_thermal: cpu_thermal {
 	polling-delay = <1000>; /* milliseconds */
 
 			/* sensor       ID */
-        thermal-sensors = <&bandgap     0>;
+	thermal-sensors = <&bandgap     0>;
 
 	cpu_trips: trips {
-                cpu_alert0: cpu_alert {
-                        temperature = <100000>; /* millicelsius */
-                        hysteresis = <2000>; /* millicelsius */
-                        type = "passive";
-                };
-                cpu_crit: cpu_crit {
-                        temperature = <125000>; /* millicelsius */
-                        hysteresis = <2000>; /* millicelsius */
-                        type = "critical";
-                };
-        };
+		cpu_alert0: cpu_alert {
+			temperature = <100000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <125000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
 
 	cpu_cooling_maps: cooling-maps {
 		map0 {
diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi
index a9573d441dea..7ae8b620515c 100644
--- a/arch/arm/boot/dts/omap4-l4-abe.dtsi
+++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi
@@ -186,37 +186,39 @@
 		};
 
 		target-module@28000 {			/* 0x40128000, ap 8 08.0 */
+							/* 0x4012a000, ap 10 0a.0 */
 			compatible = "ti,sysc-mcasp", "ti,sysc";
 			reg = <0x28000 0x4>,
 			      <0x28004 0x4>;
 			reg-names = "rev", "sysc";
 			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
+					<SYSC_IDLE_SMART>;
 			/* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */
 			clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x28000 0x1000>,
-				 <0x49028000 0x49028000 0x1000>;
-
-			/*
-			 * Child device unsupported by davinci-mcasp. At least
-			 * RX path is disabled for omap4, and only DIT mode
-			 * works with no I2S. See also old Android kernel
-			 * omap-mcasp driver for more information.
-			 */
-		};
-
-		target-module@2a000 {			/* 0x4012a000, ap 10 0a.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x2a000 0x1000>,
+				 <0x49028000 0x49028000 0x1000>,
+				 <0x2000 0x2a000 0x1000>,
 				 <0x4902a000 0x4902a000 0x1000>;
+
+			mcasp0: mcasp@0 {
+				compatible = "ti,omap4-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x4902a000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx";
+				dmas = <&sdma 8>;
+				dma-names = "tx";
+				clocks = <&abe_clkctrl OMAP4_MCASP_CLKCTRL 0>;
+				clock-names = "fck";
+				op-mode = <1>;	/* MCASP_DIT_MODE */
+				serial-dir = < 1 >; /* 1 TX serializers */
+				status = "disabled";
+			};
 		};
 
 		target-module@2e000 {			/* 0x4012e000, ap 12 0c.0 */
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
index e0bb60a30779..46b8f9efd413 100644
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -1,6 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 &l4_cfg {						/* 0x4a000000 */
-	compatible = "ti,omap4-l4-cfg", "simple-bus";
+	compatible = "ti,omap4-l4-cfg", "simple-pm-bus";
+	power-domains = <&prm_core>;
+	clocks = <&l4_cfg_clkctrl OMAP4_L4_CFG_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x4a000000 0x800>,
 	      <0x4a000800 0x800>,
 	      <0x4a001000 0x1000>;
@@ -16,7 +19,7 @@
 		 <0x00300000 0x4a300000 0x080000>;	/* segment 6 */
 
 	segment@0 {					/* 0x4a000000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -43,7 +46,6 @@
 
 		target-module@2000 {			/* 0x4a002000, ap 3 06.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "ctrl_module_core";
 			reg = <0x2000 0x4>,
 			      <0x2010 0x4>;
 			reg-names = "rev", "sysc";
@@ -347,7 +349,7 @@
 	};
 
 	segment@80000 {					/* 0x4a080000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00059000 0x000d9000 0x001000>,	/* ap 13 */
@@ -598,11 +600,11 @@
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <3>;
 				ti,mbox-num-fifos = <8>;
-				mbox_ipu: mbox_ipu {
+				mbox_ipu: mbox-ipu {
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <1 0 0>;
 				};
-				mbox_dsp: mbox_dsp {
+				mbox_dsp: mbox-dsp {
 					ti,mbox-tx = <3 0 0>;
 					ti,mbox-rx = <2 0 0>;
 				};
@@ -639,7 +641,7 @@
 	};
 
 	segment@100000 {					/* 0x4a100000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00100000 0x001000>,	/* ap 21 */
@@ -653,7 +655,6 @@
 
 		target-module@0 {			/* 0x4a100000, ap 21 2a.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "ctrl_module_pad_core";
 			reg = <0x0 0x4>,
 			      <0x10 0x4>;
 			reg-names = "rev", "sysc";
@@ -741,13 +742,13 @@
 	};
 
 	segment@180000 {					/* 0x4a180000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
 
 	segment@200000 {					/* 0x4a200000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0001e000 0x0021e000 0x001000>,	/* ap 31 */
@@ -903,13 +904,13 @@
 	};
 
 	segment@280000 {					/* 0x4a280000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
 
 	l4_cfg_segment_300000: segment@300000 {			/* 0x4a300000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00300000 0x020000>,	/* ap 67 */
@@ -944,7 +945,10 @@
 };
 
 &l4_wkup {						/* 0x4a300000 */
-	compatible = "ti,omap4-l4-wkup", "simple-bus";
+	compatible = "ti,omap4-l4-wkup", "simple-pm-bus";
+	power-domains = <&prm_wkup>;
+	clocks = <&l4_wkup_clkctrl OMAP4_L4_WKUP_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x4a300000 0x800>,
 	      <0x4a300800 0x800>,
 	      <0x4a301000 0x1000>;
@@ -956,7 +960,7 @@
 		 <0x00020000 0x4a320000 0x010000>;	/* segment 2 */
 
 	segment@0 {					/* 0x4a300000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -1041,7 +1045,6 @@
 
 		target-module@c000 {			/* 0x4a30c000, ap 19 2c.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "ctrl_module_wkup";
 			reg = <0xc000 0x4>,
 			      <0xc010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1062,7 +1065,7 @@
 	};
 
 	segment@10000 {					/* 0x4a310000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
@@ -1202,7 +1205,6 @@
 
 		target-module@e000 {			/* 0x4a31e000, ap 21 30.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "ctrl_module_pad_wkup";
 			reg = <0xe000 0x4>,
 			      <0xe010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1231,7 +1233,7 @@
 	};
 
 	segment@20000 {					/* 0x4a320000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
@@ -1284,7 +1286,10 @@
 };
 
 &l4_per {						/* 0x48000000 */
-	compatible = "ti,omap4-l4-per", "simple-bus";
+	compatible = "ti,omap4-l4-per", "simple-pm-bus";
+	power-domains = <&prm_l4per>;
+	clocks = <&l4_per_clkctrl OMAP4_L4_PER_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x48000000 0x800>,
 	      <0x48000800 0x800>,
 	      <0x48001000 0x400>,
@@ -1298,7 +1303,7 @@
 		 <0x00200000 0x48200000 0x200000>;	/* segment 1 */
 
 	segment@0 {					/* 0x48000000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -2437,7 +2442,7 @@
 	};
 
 	segment@200000 {					/* 0x48200000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00150000 0x00350000 0x001000>,	/* ap 77 */
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 609a8dea946b..0269424350aa 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -49,13 +49,13 @@
 			&led_wkgpio_pins
 		>;
 
-		heartbeat {
+		led-heartbeat {
 			label = "pandaboard::status1";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		mmc {
+		led-mmc {
 			label = "pandaboard::status2";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
@@ -558,7 +558,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 7c6886cd738f..7631029e4d7a 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -79,10 +79,10 @@
 		&led_wkgpio_pins
 	>;
 
-	heartbeat {
+	led-heartbeat {
 		gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
 	};
-	mmc {
+	led-mmc {
 		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 72e4f6481776..2bbff9032be3 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -22,6 +22,11 @@
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -54,14 +59,12 @@
 	};
 
 	/*
-	 * Note that 4430 needs cross trigger interface (CTI) supported
-	 * before we can configure the interrupts. This means sampling
-	 * events are not supported for pmu. Note that 4460 does not use
-	 * CTI, see also 4460.dtsi.
+	 * Needed early by omap4_sram_init() for barrier, do not move to l3
+	 * interconnect as simple-pm-bus probes at module_init() time.
 	 */
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		ti,hwmods = "debugss";
+	ocmcram: sram@40304000 {
+		compatible = "mmio-sram";
+		reg = <0x40304000 0xa000>; /* 40k */
 	};
 
 	gic: interrupt-controller@48241000 {
@@ -97,19 +100,6 @@
 	};
 
 	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap4-mpu";
-			ti,hwmods = "mpu";
-			sram = <&ocmcram>;
-		};
-	};
-
-	/*
 	 * XXX: Use a flat representation of the OMAP4 interconnect.
 	 * The real OMAP interconnect network is quite complex.
 	 * Since it will not bring real advantage to represent that in DT for
@@ -117,16 +107,23 @@
 	 * hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap4-l3-noc", "simple-bus";
+		compatible = "simple-pm-bus";
+		power-domains = <&prm_l4per>;
+		clocks = <&l3_1_clkctrl OMAP4_L3_MAIN_1_CLKCTRL 0>,
+			 <&l3_2_clkctrl OMAP4_L3_MAIN_2_CLKCTRL 0>,
+			 <&l3_instr_clkctrl OMAP4_L3_MAIN_3_CLKCTRL 0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
-		reg = <0x44000000 0x1000>,
-		      <0x44800000 0x2000>,
-		      <0x45000000 0x1000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		l3-noc@44000000 {
+			compatible = "ti,omap4-l3-noc";
+			reg = <0x44000000 0x1000>,
+			      <0x44800000 0x2000>,
+			      <0x45000000 0x1000>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
 		l4_wkup: interconnect@4a300000 {
 		};
@@ -137,12 +134,22 @@
 		l4_per: interconnect@48000000 {
 		};
 
-		l4_abe: interconnect@40100000 {
+		target-module@48210000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			power-domains = <&prm_mpu>;
+			clocks = <&mpuss_clkctrl OMAP4_MPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48210000 0x1f0000>;
+
+			mpu {
+				compatible = "ti,omap4-mpu";
+				sram = <&ocmcram>;
+			};
 		};
 
-		ocmcram: sram@40304000 {
-			compatible = "mmio-sram";
-			reg = <0x40304000 0xa000>; /* 40k */
+		l4_abe: interconnect@40100000 {
 		};
 
 		target-module@50000000 {
@@ -184,7 +191,6 @@
 
 		target-module@52000000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "iss";
 			reg = <0x52000000 0x4>,
 			      <0x52000010 0x4>;
 			reg-names = "rev", "sysc";
@@ -198,6 +204,7 @@
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
 			ti,sysc-delay-us = <2>;
+			power-domains = <&prm_cam>;
 			clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
@@ -207,6 +214,26 @@
 			/* No child device binding, driver in staging */
 		};
 
+		/*
+		 * Note that 4430 needs cross trigger interface (CTI) supported
+		 * before we can configure the interrupts. This means sampling
+		 * events are not supported for pmu. Note that 4460 does not use
+		 * CTI, see also 4460.dtsi.
+		 */
+		target-module@54000000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			power-domains = <&prm_emu>;
+			clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x54000000 0x1000000>;
+
+			pmu: pmu {
+				compatible = "arm,cortex-a9-pmu";
+			};
+		};
+
 		target-module@55082000 {
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x55082000 0x4>,
@@ -256,35 +283,67 @@
 			/* No child device binding or driver in mainline */
 		};
 
-		dmm@4e000000 {
-			compatible = "ti,omap4-dmm";
-			reg = <0x4e000000 0x800>;
-			interrupts = <0 113 0x4>;
-			ti,hwmods = "dmm";
+		target-module@4e000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4e000000 0x4>,
+			      <0x4e000010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ranges = <0x0 0x4e000000 0x2000000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			dmm@0 {
+				compatible = "ti,omap4-dmm";
+				reg = <0 0x800>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
-		emif1: emif@4c000000 {
-			compatible = "ti,emif-4d";
-			reg = <0x4c000000 0x100>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "emif1";
-			ti,no-idle-on-init;
-			phy-type = <1>;
-			hw-caps-read-idle-ctrl;
-			hw-caps-ll-interface;
-			hw-caps-temp-alert;
+		target-module@4c000000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x4c000000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3_emif_clkctrl OMAP4_EMIF1_CLKCTRL 0>;
+			clock-names = "fck";
+			ti,no-idle;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4c000000 0x1000000>;
+
+			emif1: emif@0 {
+				compatible = "ti,emif-4d";
+				reg = <0 0x100>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				phy-type = <1>;
+				hw-caps-read-idle-ctrl;
+				hw-caps-ll-interface;
+				hw-caps-temp-alert;
+			};
 		};
 
-		emif2: emif@4d000000 {
-			compatible = "ti,emif-4d";
-			reg = <0x4d000000 0x100>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "emif2";
-			ti,no-idle-on-init;
-			phy-type = <1>;
-			hw-caps-read-idle-ctrl;
-			hw-caps-ll-interface;
-			hw-caps-temp-alert;
+		target-module@4d000000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x4d000000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3_emif_clkctrl OMAP4_EMIF2_CLKCTRL 0>;
+			clock-names = "fck";
+			ti,no-idle;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4d000000 0x1000000>;
+
+			emif2: emif@0 {
+				compatible = "ti,emif-4d";
+				reg = <0 0x100>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				phy-type = <1>;
+				hw-caps-read-idle-ctrl;
+				hw-caps-ll-interface;
+				hw-caps-temp-alert;
+			};
 		};
 
 		dsp: dsp {
@@ -435,6 +494,7 @@
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
+			power-domains = <&prm_gfx>;
 			clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi
index 39297868ec85..581e088231b5 100644
--- a/arch/arm/boot/dts/omap443x-clocks.dtsi
+++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
@@ -8,6 +8,7 @@
 	bandgap_fclk: bandgap_fclk@1888 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "bandgap_fclk";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x1888>;
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index 8466161197ae..238aceb799f8 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP443x SoC
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "omap4.dtsi"
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 2d3e54901b6e..1b27a862ae81 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP4460 SoC
  *
  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 #include "omap4.dtsi"
 
@@ -26,13 +23,6 @@
 		};
 	};
 
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-		ti,hwmods = "debugss";
-	};
-
 	thermal-zones {
 		#include "omap4-cpu-thermal.dtsi"
 	};
@@ -128,4 +118,10 @@
 		 <0x00030000 0x00030000 0x00010000>;
 };
 
+&pmu {
+	compatible = "arm,cortex-a9-pmu";
+	interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 /include/ "omap446x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap446x-clocks.dtsi b/arch/arm/boot/dts/omap446x-clocks.dtsi
index 0f41714cffbb..d9362fef6720 100644
--- a/arch/arm/boot/dts/omap446x-clocks.dtsi
+++ b/arch/arm/boot/dts/omap446x-clocks.dtsi
@@ -8,6 +8,7 @@
 	div_ts_ck: div_ts_ck@1888 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "div_ts_ck";
 		clocks = <&l4_wkup_clk_mux_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1888>;
@@ -17,6 +18,7 @@
 	bandgap_ts_fclk: bandgap_ts_fclk@1888 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "bandgap_ts_fclk";
 		clocks = <&div_ts_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x1888>;
diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
index 532868591107..8df73d285638 100644
--- a/arch/arm/boot/dts/omap44xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -8,18 +8,21 @@
 	extalt_clkin_ck: extalt_clkin_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "extalt_clkin_ck";
 		clock-frequency = <59000000>;
 	};
 
 	pad_clks_src_ck: pad_clks_src_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "pad_clks_src_ck";
 		clock-frequency = <12000000>;
 	};
 
 	pad_clks_ck: pad_clks_ck@108 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "pad_clks_ck";
 		clocks = <&pad_clks_src_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0108>;
@@ -28,24 +31,28 @@
 	pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "pad_slimbus_core_clks_ck";
 		clock-frequency = <12000000>;
 	};
 
 	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "secure_32k_clk_src_ck";
 		clock-frequency = <32768>;
 	};
 
 	slimbus_src_clk: slimbus_src_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "slimbus_src_clk";
 		clock-frequency = <12000000>;
 	};
 
 	slimbus_clk: slimbus_clk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "slimbus_clk";
 		clocks = <&slimbus_src_clk>;
 		ti,bit-shift = <10>;
 		reg = <0x0108>;
@@ -54,84 +61,98 @@
 	sys_32k_ck: sys_32k_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "sys_32k_ck";
 		clock-frequency = <32768>;
 	};
 
 	virt_12000000_ck: virt_12000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_12000000_ck";
 		clock-frequency = <12000000>;
 	};
 
 	virt_13000000_ck: virt_13000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_13000000_ck";
 		clock-frequency = <13000000>;
 	};
 
 	virt_16800000_ck: virt_16800000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_16800000_ck";
 		clock-frequency = <16800000>;
 	};
 
 	virt_19200000_ck: virt_19200000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_19200000_ck";
 		clock-frequency = <19200000>;
 	};
 
 	virt_26000000_ck: virt_26000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_26000000_ck";
 		clock-frequency = <26000000>;
 	};
 
 	virt_27000000_ck: virt_27000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_27000000_ck";
 		clock-frequency = <27000000>;
 	};
 
 	virt_38400000_ck: virt_38400000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_38400000_ck";
 		clock-frequency = <38400000>;
 	};
 
 	tie_low_clock_ck: tie_low_clock_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "tie_low_clock_ck";
 		clock-frequency = <0>;
 	};
 
 	utmi_phy_clkout_ck: utmi_phy_clkout_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "utmi_phy_clkout_ck";
 		clock-frequency = <60000000>;
 	};
 
 	xclk60mhsp1_ck: xclk60mhsp1_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "xclk60mhsp1_ck";
 		clock-frequency = <60000000>;
 	};
 
 	xclk60mhsp2_ck: xclk60mhsp2_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "xclk60mhsp2_ck";
 		clock-frequency = <60000000>;
 	};
 
 	xclk60motg_ck: xclk60motg_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "xclk60motg_ck";
 		clock-frequency = <60000000>;
 	};
 
 	dpll_abe_ck: dpll_abe_ck@1e0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-m4xen-clock";
+		clock-output-names = "dpll_abe_ck";
 		clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>;
 		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
 	};
@@ -139,6 +160,7 @@
 	dpll_abe_x2_ck: dpll_abe_x2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_abe_x2_ck";
 		clocks = <&dpll_abe_ck>;
 		reg = <0x01f0>;
 	};
@@ -146,6 +168,7 @@
 	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m2x2_ck";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -157,6 +180,7 @@
 	abe_24m_fclk: abe_24m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "abe_24m_fclk";
 		clocks = <&dpll_abe_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <8>;
@@ -165,6 +189,7 @@
 	abe_clk: abe_clk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_clk";
 		clocks = <&dpll_abe_m2x2_ck>;
 		ti,max-div = <4>;
 		reg = <0x0108>;
@@ -175,6 +200,7 @@
 	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m3x2_ck";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -186,6 +212,7 @@
 	core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@12c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "core_hsd_byp_clk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x012c>;
@@ -194,6 +221,7 @@
 	dpll_core_ck: dpll_core_ck@120 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
+		clock-output-names = "dpll_core_ck";
 		clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>;
 		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
 	};
@@ -201,12 +229,14 @@
 	dpll_core_x2_ck: dpll_core_x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_core_x2_ck";
 		clocks = <&dpll_core_ck>;
 	};
 
 	dpll_core_m6x2_ck: dpll_core_m6x2_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m6x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -218,6 +248,7 @@
 	dpll_core_m2_ck: dpll_core_m2_ck@130 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m2_ck";
 		clocks = <&dpll_core_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -229,6 +260,7 @@
 	ddrphy_ck: ddrphy_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "ddrphy_ck";
 		clocks = <&dpll_core_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -237,6 +269,7 @@
 	dpll_core_m5x2_ck: dpll_core_m5x2_ck@13c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m5x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -248,6 +281,7 @@
 	div_core_ck: div_core_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "div_core_ck";
 		clocks = <&dpll_core_m5x2_ck>;
 		reg = <0x0100>;
 		ti,max-div = <2>;
@@ -256,6 +290,7 @@
 	div_iva_hs_clk: div_iva_hs_clk@1dc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "div_iva_hs_clk";
 		clocks = <&dpll_core_m5x2_ck>;
 		ti,max-div = <4>;
 		reg = <0x01dc>;
@@ -265,6 +300,7 @@
 	div_mpu_hs_clk: div_mpu_hs_clk@19c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "div_mpu_hs_clk";
 		clocks = <&dpll_core_m5x2_ck>;
 		ti,max-div = <4>;
 		reg = <0x019c>;
@@ -274,6 +310,7 @@
 	dpll_core_m4x2_ck: dpll_core_m4x2_ck@138 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m4x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -285,6 +322,7 @@
 	dll_clk_div_ck: dll_clk_div_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dll_clk_div_ck";
 		clocks = <&dpll_core_m4x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -293,6 +331,7 @@
 	dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m2_ck";
 		clocks = <&dpll_abe_ck>;
 		ti,max-div = <31>;
 		reg = <0x01f0>;
@@ -302,6 +341,7 @@
 	dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck@134 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "dpll_core_m3x2_gate_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0134>;
@@ -310,6 +350,7 @@
 	dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@134 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
+		clock-output-names = "dpll_core_m3x2_div_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0134>;
@@ -319,12 +360,14 @@
 	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "dpll_core_m3x2_ck";
 		clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>;
 	};
 
 	dpll_core_m7x2_ck: dpll_core_m7x2_ck@144 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m7x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -336,6 +379,7 @@
 	iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "iva_hsd_byp_clk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>;
 		ti,bit-shift = <23>;
 		reg = <0x01ac>;
@@ -344,6 +388,7 @@
 	dpll_iva_ck: dpll_iva_ck@1a0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_iva_ck";
 		clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>;
 		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
 		assigned-clocks = <&dpll_iva_ck>;
@@ -353,12 +398,14 @@
 	dpll_iva_x2_ck: dpll_iva_x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_iva_x2_ck";
 		clocks = <&dpll_iva_ck>;
 	};
 
 	dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@1b8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_iva_m4x2_ck";
 		clocks = <&dpll_iva_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -372,6 +419,7 @@
 	dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_iva_m5x2_ck";
 		clocks = <&dpll_iva_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -385,6 +433,7 @@
 	dpll_mpu_ck: dpll_mpu_ck@160 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_mpu_ck";
 		clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>;
 		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
 	};
@@ -392,6 +441,7 @@
 	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_mpu_m2_ck";
 		clocks = <&dpll_mpu_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -403,6 +453,7 @@
 	per_hs_clk_div_ck: per_hs_clk_div_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "per_hs_clk_div_ck";
 		clocks = <&dpll_abe_m3x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -411,6 +462,7 @@
 	usb_hs_clk_div_ck: usb_hs_clk_div_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "usb_hs_clk_div_ck";
 		clocks = <&dpll_abe_m3x2_ck>;
 		clock-mult = <1>;
 		clock-div = <3>;
@@ -419,6 +471,7 @@
 	l3_div_ck: l3_div_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3_div_ck";
 		clocks = <&div_core_ck>;
 		ti,bit-shift = <4>;
 		ti,max-div = <2>;
@@ -428,6 +481,7 @@
 	l4_div_ck: l4_div_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l4_div_ck";
 		clocks = <&l3_div_ck>;
 		ti,bit-shift = <8>;
 		ti,max-div = <2>;
@@ -437,6 +491,7 @@
 	lp_clk_div_ck: lp_clk_div_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "lp_clk_div_ck";
 		clocks = <&dpll_abe_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <16>;
@@ -445,6 +500,7 @@
 	mpu_periphclk: mpu_periphclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mpu_periphclk";
 		clocks = <&dpll_mpu_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -453,6 +509,7 @@
 	ocp_abe_iclk: ocp_abe_iclk@528 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "ocp_abe_iclk";
 		clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 24>;
 		ti,bit-shift = <24>;
 		reg = <0x0528>;
@@ -462,6 +519,7 @@
 	per_abe_24m_fclk: per_abe_24m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "per_abe_24m_fclk";
 		clocks = <&dpll_abe_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
@@ -470,6 +528,7 @@
 	dummy_ck: dummy_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "dummy_ck";
 		clock-frequency = <0>;
 	};
 };
@@ -478,6 +537,7 @@
 	sys_clkin_ck: sys_clkin_ck@110 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sys_clkin_ck";
 		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
 		reg = <0x0110>;
 		ti,index-starts-at-one;
@@ -486,6 +546,7 @@
 	abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_bypass_clk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x0108>;
@@ -494,6 +555,7 @@
 	abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@10c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_refclk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
 		reg = <0x010c>;
 	};
@@ -501,6 +563,7 @@
 	dbgclk_mux_ck: dbgclk_mux_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dbgclk_mux_ck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -509,6 +572,7 @@
 	l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "l4_wkup_clk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>;
 		reg = <0x0108>;
 	};
@@ -516,6 +580,7 @@
 	syc_clk_div_ck: syc_clk_div_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "syc_clk_div_ck";
 		clocks = <&sys_clkin_ck>;
 		reg = <0x0100>;
 		ti,max-div = <2>;
@@ -524,6 +589,7 @@
 	usim_ck: usim_ck@1858 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "usim_ck";
 		clocks = <&dpll_per_m4x2_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1858>;
@@ -533,6 +599,7 @@
 	usim_fclk: usim_fclk@1858 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usim_fclk";
 		clocks = <&usim_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x1858>;
@@ -541,6 +608,7 @@
 	trace_clk_div_ck: trace_clk_div_ck {
 		#clock-cells = <0>;
 		compatible = "ti,clkdm-gate-clock";
+		clock-output-names = "trace_clk_div_ck";
 		clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 24>;
 	};
 };
@@ -548,6 +616,7 @@
 &prm_clockdomains {
 	emu_sys_clkdm: emu_sys_clkdm {
 		compatible = "ti,clockdomain";
+		clock-output-names = "emu_sys_clkdm";
 		clocks = <&trace_clk_div_ck>;
 	};
 };
@@ -556,6 +625,7 @@
 	per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@14c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "per_hsd_byp_clk_mux_ck";
 		clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x014c>;
@@ -564,6 +634,7 @@
 	dpll_per_ck: dpll_per_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_per_ck";
 		clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
@@ -571,6 +642,7 @@
 	dpll_per_m2_ck: dpll_per_m2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2_ck";
 		clocks = <&dpll_per_ck>;
 		ti,max-div = <31>;
 		reg = <0x0150>;
@@ -580,6 +652,7 @@
 	dpll_per_x2_ck: dpll_per_x2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_per_x2_ck";
 		clocks = <&dpll_per_ck>;
 		reg = <0x0150>;
 	};
@@ -587,6 +660,7 @@
 	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -598,6 +672,7 @@
 	dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck@154 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "dpll_per_m3x2_gate_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0154>;
@@ -606,6 +681,7 @@
 	dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@154 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-divider-clock";
+		clock-output-names = "dpll_per_m3x2_div_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0154>;
@@ -615,12 +691,14 @@
 	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "dpll_per_m3x2_ck";
 		clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>;
 	};
 
 	dpll_per_m4x2_ck: dpll_per_m4x2_ck@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m4x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -632,6 +710,7 @@
 	dpll_per_m5x2_ck: dpll_per_m5x2_ck@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m5x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -643,6 +722,7 @@
 	dpll_per_m6x2_ck: dpll_per_m6x2_ck@160 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m6x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -654,6 +734,7 @@
 	dpll_per_m7x2_ck: dpll_per_m7x2_ck@164 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m7x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -665,6 +746,7 @@
 	dpll_usb_ck: dpll_usb_ck@180 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
+		clock-output-names = "dpll_usb_ck";
 		clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
@@ -672,6 +754,7 @@
 	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@1b4 {
 		#clock-cells = <0>;
 		compatible = "ti,fixed-factor-clock";
+		clock-output-names = "dpll_usb_clkdcoldo_ck";
 		clocks = <&dpll_usb_ck>;
 		ti,clock-div = <1>;
 		ti,autoidle-shift = <8>;
@@ -683,6 +766,7 @@
 	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_usb_m2_ck";
 		clocks = <&dpll_usb_ck>;
 		ti,max-div = <127>;
 		ti,autoidle-shift = <8>;
@@ -694,6 +778,7 @@
 	ducati_clk_mux_ck: ducati_clk_mux_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "ducati_clk_mux_ck";
 		clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>;
 		reg = <0x0100>;
 	};
@@ -701,6 +786,7 @@
 	func_12m_fclk: func_12m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_12m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <16>;
@@ -709,6 +795,7 @@
 	func_24m_clk: func_24m_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_24m_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
@@ -717,6 +804,7 @@
 	func_24mc_fclk: func_24mc_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_24mc_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <8>;
@@ -725,6 +813,7 @@
 	func_48m_fclk: func_48m_fclk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "func_48m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		reg = <0x0108>;
 		ti,dividers = <4>, <8>;
@@ -733,6 +822,7 @@
 	func_48mc_fclk: func_48mc_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_48mc_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
@@ -741,6 +831,7 @@
 	func_64m_fclk: func_64m_fclk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "func_64m_fclk";
 		clocks = <&dpll_per_m4x2_ck>;
 		reg = <0x0108>;
 		ti,dividers = <2>, <4>;
@@ -749,6 +840,7 @@
 	func_96m_fclk: func_96m_fclk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "func_96m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		reg = <0x0108>;
 		ti,dividers = <2>, <4>;
@@ -757,6 +849,7 @@
 	init_60m_fclk: init_60m_fclk@104 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "init_60m_fclk";
 		clocks = <&dpll_usb_m2_ck>;
 		reg = <0x0104>;
 		ti,dividers = <1>, <8>;
@@ -765,22 +858,16 @@
 	per_abe_nc_fclk: per_abe_nc_fclk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "per_abe_nc_fclk";
 		clocks = <&dpll_abe_m2_ck>;
 		reg = <0x0108>;
 		ti,max-div = <2>;
 	};
 
-	sha2md5_fck: sha2md5_fck@15c8 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x15c8>;
-	};
-
 	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy_cm_clk32k";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0640>;
@@ -790,6 +877,7 @@
 &cm2_clockdomains {
 	l3_init_clkdm: l3_init_clkdm {
 		compatible = "ti,clockdomain";
+		clock-output-names = "l3_init_clkdm";
 		clocks = <&dpll_usb_ck>;
 	};
 };
@@ -798,6 +886,7 @@
 	auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk0_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0310>;
@@ -806,6 +895,7 @@
 	auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk0_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0310>;
@@ -814,12 +904,14 @@
 	auxclk0_src_ck: auxclk0_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk0_src_ck";
 		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
 	};
 
 	auxclk0_ck: auxclk0_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk0_ck";
 		clocks = <&auxclk0_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -829,6 +921,7 @@
 	auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk1_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0314>;
@@ -837,6 +930,7 @@
 	auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk1_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0314>;
@@ -845,12 +939,14 @@
 	auxclk1_src_ck: auxclk1_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk1_src_ck";
 		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
 	};
 
 	auxclk1_ck: auxclk1_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk1_ck";
 		clocks = <&auxclk1_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -860,6 +956,7 @@
 	auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk2_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0318>;
@@ -868,6 +965,7 @@
 	auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk2_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0318>;
@@ -876,12 +974,14 @@
 	auxclk2_src_ck: auxclk2_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk2_src_ck";
 		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
 	};
 
 	auxclk2_ck: auxclk2_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk2_ck";
 		clocks = <&auxclk2_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -891,6 +991,7 @@
 	auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk3_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x031c>;
@@ -899,6 +1000,7 @@
 	auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk3_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x031c>;
@@ -907,12 +1009,14 @@
 	auxclk3_src_ck: auxclk3_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk3_src_ck";
 		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
 	};
 
 	auxclk3_ck: auxclk3_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk3_ck";
 		clocks = <&auxclk3_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -922,6 +1026,7 @@
 	auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk4_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0320>;
@@ -930,6 +1035,7 @@
 	auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk4_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0320>;
@@ -938,12 +1044,14 @@
 	auxclk4_src_ck: auxclk4_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk4_src_ck";
 		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
 	};
 
 	auxclk4_ck: auxclk4_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk4_ck";
 		clocks = <&auxclk4_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -953,6 +1061,7 @@
 	auxclk5_src_gate_ck: auxclk5_src_gate_ck@324 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk5_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0324>;
@@ -961,6 +1070,7 @@
 	auxclk5_src_mux_ck: auxclk5_src_mux_ck@324 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk5_src_mux_ck";
 		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0324>;
@@ -969,12 +1079,14 @@
 	auxclk5_src_ck: auxclk5_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk5_src_ck";
 		clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>;
 	};
 
 	auxclk5_ck: auxclk5_ck@324 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk5_ck";
 		clocks = <&auxclk5_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -984,6 +1096,7 @@
 	auxclkreq0_ck: auxclkreq0_ck@210 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq0_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0210>;
@@ -992,6 +1105,7 @@
 	auxclkreq1_ck: auxclkreq1_ck@214 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq1_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0214>;
@@ -1000,6 +1114,7 @@
 	auxclkreq2_ck: auxclkreq2_ck@218 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq2_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0218>;
@@ -1008,6 +1123,7 @@
 	auxclkreq3_ck: auxclkreq3_ck@21c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq3_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x021c>;
@@ -1016,6 +1132,7 @@
 	auxclkreq4_ck: auxclkreq4_ck@220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq4_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0220>;
@@ -1024,6 +1141,7 @@
 	auxclkreq5_ck: auxclkreq5_ck@224 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq5_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0224>;
@@ -1033,6 +1151,7 @@
 &cm1 {
 	mpuss_cm: mpuss_cm@300 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "mpuss_cm";
 		reg = <0x300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1040,6 +1159,7 @@
 
 		mpuss_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "mpuss_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1047,6 +1167,7 @@
 
 	tesla_cm: tesla_cm@400 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "tesla_cm";
 		reg = <0x400 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1054,6 +1175,7 @@
 
 		tesla_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "tesla_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1061,6 +1183,7 @@
 
 	abe_cm: abe_cm@500 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "abe_cm";
 		reg = <0x500 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1068,6 +1191,7 @@
 
 		abe_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "abe_clkctrl";
 			reg = <0x20 0x6c>;
 			#clock-cells = <2>;
 		};
@@ -1078,6 +1202,7 @@
 &cm2 {
 	l4_ao_cm: l4_ao_cm@600 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_ao_cm";
 		reg = <0x600 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1085,6 +1210,7 @@
 
 		l4_ao_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_ao_clkctrl";
 			reg = <0x20 0x1c>;
 			#clock-cells = <2>;
 		};
@@ -1092,6 +1218,7 @@
 
 	l3_1_cm: l3_1_cm@700 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_1_cm";
 		reg = <0x700 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1099,6 +1226,7 @@
 
 		l3_1_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_1_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1106,6 +1234,7 @@
 
 	l3_2_cm: l3_2_cm@800 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_2_cm";
 		reg = <0x800 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1113,6 +1242,7 @@
 
 		l3_2_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_2_clkctrl";
 			reg = <0x20 0x14>;
 			#clock-cells = <2>;
 		};
@@ -1120,6 +1250,7 @@
 
 	ducati_cm: ducati_cm@900 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "ducati_cm";
 		reg = <0x900 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1127,6 +1258,7 @@
 
 		ducati_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "ducati_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1134,6 +1266,7 @@
 
 	l3_dma_cm: l3_dma_cm@a00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_dma_cm";
 		reg = <0xa00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1141,6 +1274,7 @@
 
 		l3_dma_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_dma_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1148,6 +1282,7 @@
 
 	l3_emif_cm: l3_emif_cm@b00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_emif_cm";
 		reg = <0xb00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1155,6 +1290,7 @@
 
 		l3_emif_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_emif_clkctrl";
 			reg = <0x20 0x1c>;
 			#clock-cells = <2>;
 		};
@@ -1162,6 +1298,7 @@
 
 	d2d_cm: d2d_cm@c00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "d2d_cm";
 		reg = <0xc00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1169,6 +1306,7 @@
 
 		d2d_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "d2d_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1176,6 +1314,7 @@
 
 	l4_cfg_cm: l4_cfg_cm@d00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_cfg_cm";
 		reg = <0xd00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1183,6 +1322,7 @@
 
 		l4_cfg_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_cfg_clkctrl";
 			reg = <0x20 0x14>;
 			#clock-cells = <2>;
 		};
@@ -1190,6 +1330,7 @@
 
 	l3_instr_cm: l3_instr_cm@e00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_instr_cm";
 		reg = <0xe00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1197,6 +1338,7 @@
 
 		l3_instr_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_instr_clkctrl";
 			reg = <0x20 0x24>;
 			#clock-cells = <2>;
 		};
@@ -1204,6 +1346,7 @@
 
 	ivahd_cm: ivahd_cm@f00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "ivahd_cm";
 		reg = <0xf00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1211,6 +1354,7 @@
 
 		ivahd_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "ivahd_clkctrl";
 			reg = <0x20 0xc>;
 			#clock-cells = <2>;
 		};
@@ -1218,6 +1362,7 @@
 
 	iss_cm: iss_cm@1000 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "iss_cm";
 		reg = <0x1000 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1225,6 +1370,7 @@
 
 		iss_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "iss_clkctrl";
 			reg = <0x20 0xc>;
 			#clock-cells = <2>;
 		};
@@ -1232,6 +1378,7 @@
 
 	l3_dss_cm: l3_dss_cm@1100 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_dss_cm";
 		reg = <0x1100 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1239,6 +1386,7 @@
 
 		l3_dss_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_dss_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1246,6 +1394,7 @@
 
 	l3_gfx_cm: l3_gfx_cm@1200 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_gfx_cm";
 		reg = <0x1200 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1253,6 +1402,7 @@
 
 		l3_gfx_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_gfx_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1260,6 +1410,7 @@
 
 	l3_init_cm: l3_init_cm@1300 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3_init_cm";
 		reg = <0x1300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1267,26 +1418,30 @@
 
 		l3_init_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3_init_clkctrl";
 			reg = <0x20 0xc4>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l4_per_cm: l4_per_cm@1400 {
+	l4_per_cm: clock@1400 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_per_cm";
 		reg = <0x1400 0x200>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1400 0x200>;
 
 		l4_per_clkctrl: clock@20 {
-			compatible = "ti,clkctrl-l4-per", "ti,clkctrl";
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4_per_clkctrl";
 			reg = <0x20 0x144>;
 			#clock-cells = <2>;
 		};
 
 		l4_secure_clkctrl: clock@1a0 {
-			compatible = "ti,clkctrl-l4-secure", "ti,clkctrl";
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4_secure_clkctrl";
 			reg = <0x1a0 0x3c>;
 			#clock-cells = <2>;
 		};
@@ -1296,6 +1451,7 @@
 &prm {
 	l4_wkup_cm: l4_wkup_cm@1800 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_wkup_cm";
 		reg = <0x1800 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1303,6 +1459,7 @@
 
 		l4_wkup_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4_wkup_clkctrl";
 			reg = <0x20 0x5c>;
 			#clock-cells = <2>;
 		};
@@ -1310,6 +1467,7 @@
 
 	emu_sys_cm: emu_sys_cm@1a00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "emu_sys_cm";
 		reg = <0x1a00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1317,6 +1475,7 @@
 
 		emu_sys_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "emu_sys_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index d8f13626cfd1..373984c130e0 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -30,14 +30,6 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	vdds_1v8_main: fixedregulator-vdds_1v8_main {
-		compatible = "regulator-fixed";
-		regulator-name = "vdds_1v8_main";
-		vin-supply = <&smps7_reg>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
 	vmmcsd_fixed: fixedregulator-mmcsd {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
@@ -149,7 +141,7 @@
 
 &gpio8 {
 	/* TI trees use GPIO instead of msecure, see also muxing */
-	p234 {
+	msecure-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -487,6 +479,7 @@
 					regulator-boot-on;
 				};
 
+				vdds_1v8_main:
 				smps7_reg: smps7 {
 					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 					regulator-name = "smps7";
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index ca759b7b8a58..2d87b9fc230e 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -84,36 +84,36 @@
 	};
 
 	lcd0: display {
-                compatible = "startek,startek-kd050c", "panel-dpi";
-                label = "lcd";
-
-                pinctrl-names = "default";
-                pinctrl-0 = <&lcd_pins>;
-
-                enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
-
-                panel-timing {
-                        clock-frequency = <33000000>;
-                        hactive = <800>;
-                        vactive = <480>;
-                        hfront-porch = <40>;
-                        hback-porch = <40>;
-                        hsync-len = <43>;
-                        vback-porch = <29>;
-                        vfront-porch = <13>;
-                        vsync-len = <3>;
-                        hsync-active = <0>;
-                        vsync-active = <0>;
-                        de-active = <1>;
-                        pixelclk-active = <1>;
-                };
-
-                port {
-                        lcd_in: endpoint {
-                                remote-endpoint = <&dpi_lcd_out>;
-                        };
-                };
-        };
+		compatible = "startek,startek-kd050c", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			hsync-len = <43>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			vsync-len = <3>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_lcd_out>;
+			};
+		};
+	};
 
 	hdmi0: connector0 {
 		compatible = "hdmi-connector";
@@ -644,8 +644,8 @@
 };
 
 &usb3 {
-       extcon = <&extcon_usb3>;
-       vbus-supply = <&smps10_out1_reg>;
+	extcon = <&extcon_usb3>;
+	vbus-supply = <&smps10_out1_reg>;
 };
 
 &cpu0 {
diff --git a/arch/arm/boot/dts/omap5-core-thermal.dtsi b/arch/arm/boot/dts/omap5-core-thermal.dtsi
index 02e76338bfbc..e0d8e39a0014 100644
--- a/arch/arm/boot/dts/omap5-core-thermal.dtsi
+++ b/arch/arm/boot/dts/omap5-core-thermal.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP543x SoC CORE thermal
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/thermal/thermal.h>
diff --git a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
index bf8fa9372e57..1b4b7d9136c8 100644
--- a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP543x SoC GPU thermal
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/thermal/thermal.h>
diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
index 76e499d89d24..3851120857d7 100644
--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -128,7 +128,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@3 {
+		ethernet: ethernet@3 {
 			compatible = "usb424,7500";
 			reg = <3>;
 		};
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
index 887b3359dd5a..3b505fe415ed 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -1,5 +1,8 @@
 &l4_cfg {						/* 0x4a000000 */
-	compatible = "ti,omap5-l4-cfg", "simple-bus";
+	compatible = "ti,omap5-l4-cfg", "simple-pm-bus";
+	power-domains = <&prm_core>;
+	clocks = <&l4cfg_clkctrl OMAP5_L4_CFG_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x4a000000 0x800>,
 	      <0x4a000800 0x800>,
 	      <0x4a001000 0x1000>;
@@ -15,7 +18,7 @@
 		 <0x00300000 0x4a300000 0x080000>;	/* segment 6 */
 
 	segment@0 {					/* 0x4a000000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -391,7 +394,7 @@
 	};
 
 	segment@80000 {					/* 0x4a080000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00059000 0x000d9000 0x001000>,	/* ap 13 */
@@ -479,7 +482,7 @@
 				clocks = <&usb_phy_cm_clk32k>,
 				<&sys_clkin>,
 				<&l3init_clkctrl OMAP5_USB_OTG_SS_CLKCTRL 8>;
-				clock-names =	"wkupclk",
+				clock-names = "wkupclk",
 				"sysclk",
 				"refclk";
 				#phy-cells = <0>;
@@ -613,11 +616,11 @@
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <3>;
 				ti,mbox-num-fifos = <8>;
-				mbox_ipu: mbox_ipu {
+				mbox_ipu: mbox-ipu {
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <1 0 0>;
 				};
-				mbox_dsp: mbox_dsp {
+				mbox_dsp: mbox-dsp {
 					ti,mbox-tx = <3 0 0>;
 					ti,mbox-rx = <2 0 0>;
 				};
@@ -654,7 +657,7 @@
 	};
 
 	segment@100000 {					/* 0x4a100000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00002000 0x00102000 0x001000>,	/* ap 59 */
@@ -691,22 +694,44 @@
 		};
 
 		target-module@40000 {			/* 0x4a140000, ap 101 16.0 */
-			compatible = "ti,sysc";
-			status = "disabled";
-			#address-cells = <1>;
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x400fc 4>,
+			      <0x41100 4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			power-domains = <&prm_l3init>;
+			clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 0>;
+			clock-names = "fck";
 			#size-cells = <1>;
+			#address-cells = <1>;
 			ranges = <0x0 0x40000 0x10000>;
+
+			sata: sata@0 {
+				compatible = "snps,dwc-ahci";
+				reg = <0 0x1100>, <0x1100 0x8>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&sata_phy>;
+				phy-names = "sata-phy";
+				clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
+				ports-implemented = <0x1>;
+			};
 		};
 	};
 
 	segment@180000 {					/* 0x4a180000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
 
 	segment@200000 {					/* 0x4a200000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0001e000 0x0021e000 0x001000>,	/* ap 29 */
@@ -912,20 +937,23 @@
 	};
 
 	segment@280000 {					/* 0x4a280000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
 
 	segment@300000 {					/* 0x4a300000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
 };
 
 &l4_per {						/* 0x48000000 */
-	compatible = "ti,omap5-l4-per", "simple-bus";
+	compatible = "ti,omap5-l4-per", "simple-pm-bus";
+	power-domains = <&prm_core>;
+	clocks = <&l4per_clkctrl OMAP5_L4_PER_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x48000000 0x800>,
 	      <0x48000800 0x800>,
 	      <0x48001000 0x400>,
@@ -939,7 +967,7 @@
 		 <0x00200000 0x48200000 0x200000>;	/* segment 1 */
 
 	segment@0 {					/* 0x48000000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -2148,14 +2176,17 @@
 	};
 
 	segment@200000 {					/* 0x48200000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
 };
 
 &l4_wkup {						/* 0x4ae00000 */
-	compatible = "ti,omap5-l4-wkup", "simple-bus";
+	compatible = "ti,omap5-l4-wkup", "simple-pm-bus";
+	power-domains = <&prm_wkupaon>;
+	clocks = <&wkupaon_clkctrl OMAP5_L4_WKUP_CLKCTRL 0>;
+	clock-names = "fck";
 	reg = <0x4ae00000 0x800>,
 	      <0x4ae00800 0x800>,
 	      <0x4ae01000 0x1000>;
@@ -2167,7 +2198,7 @@
 		 <0x00020000 0x4ae20000 0x010000>;	/* segment 2 */
 
 	segment@0 {					/* 0x4ae00000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
@@ -2296,7 +2327,7 @@
 	};
 
 	segment@10000 {					/* 0x4ae10000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
@@ -2423,7 +2454,7 @@
 	};
 
 	segment@20000 {					/* 0x4ae20000 */
-		compatible = "simple-bus";
+		compatible = "simple-pm-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 51d5fcae5081..453da9f18a99 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -209,7 +209,7 @@
 		#size-cells = <0>;
 	};
 
-	ethernet: usbether@3 {
+	ethernet: ethernet@3 {
 		compatible = "usb424,9730";
 		reg = <3>;
 	};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index e025b7c9a357..bac6fa838793 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -25,6 +25,11 @@
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
 		i2c4 = &i2c5;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -101,6 +106,15 @@
 			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	/*
+	 * Needed early by omap4_sram_init() for barrier, do not move to l3
+	 * interconnect as simple-pm-bus probes at module_init() time.
+	 */
+	ocmcram: sram@40300000 {
+		compatible = "mmio-sram";
+		reg = <0 0x40300000 0 0x20000>; /* 128k */
+	};
+
 	gic: interrupt-controller@48211000 {
 		compatible = "arm,cortex-a15-gic";
 		interrupt-controller;
@@ -121,19 +135,6 @@
 	};
 
 	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap4-mpu";
-			ti,hwmods = "mpu";
-			sram = <&ocmcram>;
-		};
-	};
-
-	/*
 	 * XXX: Use a flat representation of the OMAP3 interconnect.
 	 * The real OMAP interconnect network is quite complex.
 	 * Since it will not bring real advantage to represent that in DT for
@@ -141,17 +142,24 @@
 	 * hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap5-l3-noc", "simple-bus";
+		compatible = "simple-pm-bus";
+		power-domains = <&prm_core>;
+		clocks = <&l3main1_clkctrl OMAP5_L3_MAIN_1_CLKCTRL 0>,
+			 <&l3main2_clkctrl OMAP5_L3_MAIN_2_CLKCTRL 0>,
+			 <&l3instr_clkctrl OMAP5_L3_MAIN_3_CLKCTRL 0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0 0 0xc0000000>;
 		dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
-		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
-		reg = <0 0x44000000 0 0x2000>,
-		      <0 0x44800000 0 0x3000>,
-		      <0 0x45000000 0 0x4000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		l3-noc@44000000 {
+			compatible = "ti,omap5-l3-noc";
+			reg = <0x44000000 0x2000>,
+			      <0x44800000 0x3000>,
+			      <0x45000000 0x4000>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
 		l4_wkup: interconnect@4ae00000 {
 		};
@@ -162,31 +170,58 @@
 		l4_per: interconnect@48000000 {
 		};
 
-		l4_abe: interconnect@40100000 {
+		target-module@48210000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			power-domains = <&prm_mpu>;
+			clocks = <&mpu_clkctrl OMAP5_MPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48210000 0x1f0000>;
+
+			mpu {
+				compatible = "ti,omap4-mpu";
+				sram = <&ocmcram>;
+			};
 		};
 
-		ocmcram: sram@40300000 {
-			compatible = "mmio-sram";
-			reg = <0x40300000 0x20000>; /* 128k */
+		l4_abe: interconnect@40100000 {
 		};
 
-		gpmc: gpmc@50000000 {
-			compatible = "ti,omap4430-gpmc";
-			reg = <0x50000000 0x1000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma 4>;
-			dma-names = "rxtx";
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <4>;
-			ti,hwmods = "gpmc";
-			clocks = <&l3_iclk_div>;
+		target-module@50000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x50000000 4>,
+			      <0x50000010 4>,
+			      <0x50000014 4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			ti,no-idle-on-init;
+			clocks = <&l3main2_clkctrl OMAP5_L3_MAIN_2_GPMC_CLKCTRL 0>;
 			clock-names = "fck";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
+				 <0x00000000 0x00000000 0x40000000>; /* data */
+
+			gpmc: gpmc@50000000 {
+				compatible = "ti,omap4430-gpmc";
+				reg = <0x50000000 0x1000>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 4>;
+				dma-names = "rxtx";
+				gpmc,num-cs = <8>;
+				gpmc,num-waitpins = <4>;
+				clock-names = "fck";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
 		};
 
 		target-module@55082000 {
@@ -241,35 +276,67 @@
 			status = "disabled";
 		};
 
-		dmm@4e000000 {
-			compatible = "ti,omap5-dmm";
-			reg = <0x4e000000 0x800>;
-			interrupts = <0 113 0x4>;
-			ti,hwmods = "dmm";
+		target-module@4e000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4e000000 0x4>,
+			      <0x4e000010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ranges = <0x0 0x4e000000 0x2000000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			dmm@0 {
+				compatible = "ti,omap5-dmm";
+				reg = <0 0x800>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
-		emif1: emif@4c000000 {
-			compatible	= "ti,emif-4d5";
-			ti,hwmods	= "emif1";
-			ti,no-idle-on-init;
-			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
-			reg = <0x4c000000 0x400>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			hw-caps-read-idle-ctrl;
-			hw-caps-ll-interface;
-			hw-caps-temp-alert;
+		target-module@4c000000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x4c000000 0x4>;
+			reg-names = "rev";
+			clocks = <&emif_clkctrl OMAP5_EMIF1_CLKCTRL 0>;
+			clock-names = "fck";
+			ti,no-idle;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4c000000 0x1000000>;
+
+			emif1: emif@0 {
+				compatible = "ti,emif-4d5";
+				reg = <0 0x400>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				phy-type = <2>; /* DDR PHY type: Intelli PHY */
+				hw-caps-read-idle-ctrl;
+				hw-caps-ll-interface;
+				hw-caps-temp-alert;
+			};
 		};
 
-		emif2: emif@4d000000 {
-			compatible	= "ti,emif-4d5";
-			ti,hwmods	= "emif2";
-			ti,no-idle-on-init;
-			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
-			reg = <0x4d000000 0x400>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			hw-caps-read-idle-ctrl;
-			hw-caps-ll-interface;
-			hw-caps-temp-alert;
+		target-module@4d000000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x4d000000 0x4>;
+			reg-names = "rev";
+			clocks = <&emif_clkctrl OMAP5_EMIF2_CLKCTRL 0>;
+			clock-names = "fck";
+			ti,no-idle;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4d000000 0x1000000>;
+
+			emif2: emif@0 {
+				compatible = "ti,emif-4d5";
+				reg = <0 0x400>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				phy-type = <2>; /* DDR PHY type: Intelli PHY */
+				hw-caps-read-idle-ctrl;
+				hw-caps-ll-interface;
+				hw-caps-temp-alert;
+			};
 		};
 
 		aes1_target: target-module@4b501000 {
@@ -369,18 +436,6 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		/* OCP2SCP3 */
-		sata: sata@4a141100 {
-			compatible = "snps,dwc-ahci";
-			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
-			clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>;
-			ti,hwmods = "sata";
-			ports-implemented = <0x1>;
-		};
-
 		target-module@56000000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0x5600fe00 0x4>,
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index 42f2c447727d..5cf3b0e78c15 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -8,12 +8,14 @@
 	pad_clks_src_ck: pad_clks_src_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "pad_clks_src_ck";
 		clock-frequency = <12000000>;
 	};
 
 	pad_clks_ck: pad_clks_ck@108 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "pad_clks_ck";
 		clocks = <&pad_clks_src_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0108>;
@@ -22,18 +24,21 @@
 	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "secure_32k_clk_src_ck";
 		clock-frequency = <32768>;
 	};
 
 	slimbus_src_clk: slimbus_src_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "slimbus_src_clk";
 		clock-frequency = <12000000>;
 	};
 
 	slimbus_clk: slimbus_clk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "slimbus_clk";
 		clocks = <&slimbus_src_clk>;
 		ti,bit-shift = <10>;
 		reg = <0x0108>;
@@ -42,66 +47,77 @@
 	sys_32k_ck: sys_32k_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "sys_32k_ck";
 		clock-frequency = <32768>;
 	};
 
 	virt_12000000_ck: virt_12000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_12000000_ck";
 		clock-frequency = <12000000>;
 	};
 
 	virt_13000000_ck: virt_13000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_13000000_ck";
 		clock-frequency = <13000000>;
 	};
 
 	virt_16800000_ck: virt_16800000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_16800000_ck";
 		clock-frequency = <16800000>;
 	};
 
 	virt_19200000_ck: virt_19200000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_19200000_ck";
 		clock-frequency = <19200000>;
 	};
 
 	virt_26000000_ck: virt_26000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_26000000_ck";
 		clock-frequency = <26000000>;
 	};
 
 	virt_27000000_ck: virt_27000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_27000000_ck";
 		clock-frequency = <27000000>;
 	};
 
 	virt_38400000_ck: virt_38400000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_38400000_ck";
 		clock-frequency = <38400000>;
 	};
 
 	xclk60mhsp1_ck: xclk60mhsp1_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "xclk60mhsp1_ck";
 		clock-frequency = <60000000>;
 	};
 
 	xclk60mhsp2_ck: xclk60mhsp2_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "xclk60mhsp2_ck";
 		clock-frequency = <60000000>;
 	};
 
 	dpll_abe_ck: dpll_abe_ck@1e0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-m4xen-clock";
+		clock-output-names = "dpll_abe_ck";
 		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
 		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
 	};
@@ -109,12 +125,14 @@
 	dpll_abe_x2_ck: dpll_abe_x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_abe_x2_ck";
 		clocks = <&dpll_abe_ck>;
 	};
 
 	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m2x2_ck";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x01f0>;
@@ -124,6 +142,7 @@
 	abe_24m_fclk: abe_24m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "abe_24m_fclk";
 		clocks = <&dpll_abe_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <8>;
@@ -132,6 +151,7 @@
 	abe_clk: abe_clk@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_clk";
 		clocks = <&dpll_abe_m2x2_ck>;
 		ti,max-div = <4>;
 		reg = <0x0108>;
@@ -141,6 +161,7 @@
 	abe_iclk: abe_iclk@528 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_iclk";
 		clocks = <&aess_fclk>;
 		ti,bit-shift = <24>;
 		reg = <0x0528>;
@@ -150,6 +171,7 @@
 	abe_lp_clk_div: abe_lp_clk_div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "abe_lp_clk_div";
 		clocks = <&dpll_abe_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <16>;
@@ -158,6 +180,7 @@
 	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m3x2_ck";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x01f4>;
@@ -167,6 +190,7 @@
 	dpll_core_byp_mux: dpll_core_byp_mux@12c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_core_byp_mux";
 		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x012c>;
@@ -175,6 +199,7 @@
 	dpll_core_ck: dpll_core_ck@120 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
+		clock-output-names = "dpll_core_ck";
 		clocks = <&sys_clkin>, <&dpll_core_byp_mux>;
 		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
 	};
@@ -182,12 +207,14 @@
 	dpll_core_x2_ck: dpll_core_x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_core_x2_ck";
 		clocks = <&dpll_core_ck>;
 	};
 
 	dpll_core_h21x2_ck: dpll_core_h21x2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h21x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x0150>;
@@ -197,6 +224,7 @@
 	c2c_fclk: c2c_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "c2c_fclk";
 		clocks = <&dpll_core_h21x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -205,6 +233,7 @@
 	c2c_iclk: c2c_iclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "c2c_iclk";
 		clocks = <&c2c_fclk>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -213,6 +242,7 @@
 	dpll_core_h11x2_ck: dpll_core_h11x2_ck@138 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h11x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x0138>;
@@ -222,6 +252,7 @@
 	dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h12x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x013c>;
@@ -231,6 +262,7 @@
 	dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h13x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x0140>;
@@ -240,6 +272,7 @@
 	dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h14x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x0144>;
@@ -249,6 +282,7 @@
 	dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h22x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x0154>;
@@ -258,6 +292,7 @@
 	dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h23x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x0158>;
@@ -267,6 +302,7 @@
 	dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h24x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x015c>;
@@ -276,6 +312,7 @@
 	dpll_core_m2_ck: dpll_core_m2_ck@130 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m2_ck";
 		clocks = <&dpll_core_ck>;
 		ti,max-div = <31>;
 		reg = <0x0130>;
@@ -285,6 +322,7 @@
 	dpll_core_m3x2_ck: dpll_core_m3x2_ck@134 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m3x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0134>;
@@ -294,6 +332,7 @@
 	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "iva_dpll_hs_clk_div";
 		clocks = <&dpll_core_h12x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -302,6 +341,7 @@
 	dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_iva_byp_mux";
 		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x01ac>;
@@ -310,6 +350,7 @@
 	dpll_iva_ck: dpll_iva_ck@1a0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_iva_ck";
 		clocks = <&sys_clkin>, <&dpll_iva_byp_mux>;
 		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
 		assigned-clocks = <&dpll_iva_ck>;
@@ -319,12 +360,14 @@
 	dpll_iva_x2_ck: dpll_iva_x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_iva_x2_ck";
 		clocks = <&dpll_iva_ck>;
 	};
 
 	dpll_iva_h11x2_ck: dpll_iva_h11x2_ck@1b8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_iva_h11x2_ck";
 		clocks = <&dpll_iva_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x01b8>;
@@ -336,6 +379,7 @@
 	dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@1bc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_iva_h12x2_ck";
 		clocks = <&dpll_iva_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x01bc>;
@@ -347,6 +391,7 @@
 	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mpu_dpll_hs_clk_div";
 		clocks = <&dpll_core_h12x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -355,6 +400,7 @@
 	dpll_mpu_ck: dpll_mpu_ck@160 {
 		#clock-cells = <0>;
 		compatible = "ti,omap5-mpu-dpll-clock";
+		clock-output-names = "dpll_mpu_ck";
 		clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>;
 		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
 	};
@@ -362,6 +408,7 @@
 	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_mpu_m2_ck";
 		clocks = <&dpll_mpu_ck>;
 		ti,max-div = <31>;
 		reg = <0x0170>;
@@ -371,6 +418,7 @@
 	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "per_dpll_hs_clk_div";
 		clocks = <&dpll_abe_m3x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -379,6 +427,7 @@
 	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "usb_dpll_hs_clk_div";
 		clocks = <&dpll_abe_m3x2_ck>;
 		clock-mult = <1>;
 		clock-div = <3>;
@@ -387,6 +436,7 @@
 	l3_iclk_div: l3_iclk_div@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3_iclk_div";
 		ti,max-div = <2>;
 		ti,bit-shift = <4>;
 		reg = <0x100>;
@@ -397,6 +447,7 @@
 	gpu_l3_iclk: gpu_l3_iclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "gpu_l3_iclk";
 		clocks = <&l3_iclk_div>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -405,6 +456,7 @@
 	l4_root_clk_div: l4_root_clk_div@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l4_root_clk_div";
 		ti,max-div = <2>;
 		ti,bit-shift = <8>;
 		reg = <0x100>;
@@ -415,6 +467,7 @@
 	slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "slimbus1_slimbus_clk";
 		clocks = <&slimbus_clk>;
 		ti,bit-shift = <11>;
 		reg = <0x0560>;
@@ -423,6 +476,7 @@
 	aess_fclk: aess_fclk@528 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "aess_fclk";
 		clocks = <&abe_clk>;
 		ti,bit-shift = <24>;
 		ti,max-div = <2>;
@@ -432,6 +486,7 @@
 	mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "mcasp_sync_mux_ck";
 		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
 		ti,bit-shift = <26>;
 		reg = <0x0540>;
@@ -440,6 +495,7 @@
 	mcasp_gfclk: mcasp_gfclk@540 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "mcasp_gfclk";
 		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
 		ti,bit-shift = <24>;
 		reg = <0x0540>;
@@ -448,6 +504,7 @@
 	dummy_ck: dummy_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "dummy_ck";
 		clock-frequency = <0>;
 	};
 };
@@ -455,6 +512,7 @@
 	sys_clkin: sys_clkin@110 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sys_clkin";
 		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
 		reg = <0x0110>;
 		ti,index-starts-at-one;
@@ -463,6 +521,7 @@
 	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_bypass_clk_mux";
 		clocks = <&sys_clkin>, <&sys_32k_ck>;
 		reg = <0x0108>;
 	};
@@ -470,6 +529,7 @@
 	abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_clk_mux";
 		clocks = <&sys_clkin>, <&sys_32k_ck>;
 		reg = <0x010c>;
 	};
@@ -477,6 +537,7 @@
 	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "custefuse_sys_gfclk_div";
 		clocks = <&sys_clkin>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -485,6 +546,7 @@
 	dss_syc_gfclk_div: dss_syc_gfclk_div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dss_syc_gfclk_div";
 		clocks = <&sys_clkin>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -493,6 +555,7 @@
 	wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "wkupaon_iclk_mux";
 		clocks = <&sys_clkin>, <&abe_lp_clk_div>;
 		reg = <0x0108>;
 	};
@@ -500,6 +563,7 @@
 	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l3instr_ts_gclk_div";
 		clocks = <&wkupaon_iclk_mux>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -511,6 +575,7 @@
 	dpll_per_byp_mux: dpll_per_byp_mux@14c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_per_byp_mux";
 		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x014c>;
@@ -519,6 +584,7 @@
 	dpll_per_ck: dpll_per_ck@140 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_per_ck";
 		clocks = <&sys_clkin>, <&dpll_per_byp_mux>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
@@ -526,12 +592,14 @@
 	dpll_per_x2_ck: dpll_per_x2_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_per_x2_ck";
 		clocks = <&dpll_per_ck>;
 	};
 
 	dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h11x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x0158>;
@@ -541,6 +609,7 @@
 	dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h12x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x015c>;
@@ -550,6 +619,7 @@
 	dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h14x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		reg = <0x0164>;
@@ -559,6 +629,7 @@
 	dpll_per_m2_ck: dpll_per_m2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2_ck";
 		clocks = <&dpll_per_ck>;
 		ti,max-div = <31>;
 		reg = <0x0150>;
@@ -568,6 +639,7 @@
 	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0150>;
@@ -577,6 +649,7 @@
 	dpll_per_m3x2_ck: dpll_per_m3x2_ck@154 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m3x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0154>;
@@ -586,6 +659,7 @@
 	dpll_unipro1_ck: dpll_unipro1_ck@200 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_unipro1_ck";
 		clocks = <&sys_clkin>, <&sys_clkin>;
 		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
 	};
@@ -593,6 +667,7 @@
 	dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_unipro1_clkdcoldo";
 		clocks = <&dpll_unipro1_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -601,6 +676,7 @@
 	dpll_unipro1_m2_ck: dpll_unipro1_m2_ck@210 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_unipro1_m2_ck";
 		clocks = <&dpll_unipro1_ck>;
 		ti,max-div = <127>;
 		reg = <0x0210>;
@@ -610,6 +686,7 @@
 	dpll_unipro2_ck: dpll_unipro2_ck@1c0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_unipro2_ck";
 		clocks = <&sys_clkin>, <&sys_clkin>;
 		reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>;
 	};
@@ -617,6 +694,7 @@
 	dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_unipro2_clkdcoldo";
 		clocks = <&dpll_unipro2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -625,6 +703,7 @@
 	dpll_unipro2_m2_ck: dpll_unipro2_m2_ck@1d0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_unipro2_m2_ck";
 		clocks = <&dpll_unipro2_ck>;
 		ti,max-div = <127>;
 		reg = <0x01d0>;
@@ -634,6 +713,7 @@
 	dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_usb_byp_mux";
 		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x018c>;
@@ -642,6 +722,7 @@
 	dpll_usb_ck: dpll_usb_ck@180 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
+		clock-output-names = "dpll_usb_ck";
 		clocks = <&sys_clkin>, <&dpll_usb_byp_mux>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
@@ -649,6 +730,7 @@
 	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_usb_clkdcoldo";
 		clocks = <&dpll_usb_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
@@ -657,6 +739,7 @@
 	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_usb_m2_ck";
 		clocks = <&dpll_usb_ck>;
 		ti,max-div = <127>;
 		reg = <0x0190>;
@@ -666,6 +749,7 @@
 	func_128m_clk: func_128m_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_128m_clk";
 		clocks = <&dpll_per_h11x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -674,6 +758,7 @@
 	func_12m_fclk: func_12m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_12m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <16>;
@@ -682,6 +767,7 @@
 	func_24m_clk: func_24m_clk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_24m_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
@@ -690,6 +776,7 @@
 	func_48m_fclk: func_48m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_48m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
@@ -698,6 +785,7 @@
 	func_96m_fclk: func_96m_fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_96m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
@@ -706,6 +794,7 @@
 	l3init_60m_fclk: l3init_60m_fclk@104 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3init_60m_fclk";
 		clocks = <&dpll_usb_m2_ck>;
 		reg = <0x0104>;
 		ti,dividers = <1>, <8>;
@@ -714,6 +803,7 @@
 	iss_ctrlclk: iss_ctrlclk@1320 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "iss_ctrlclk";
 		clocks = <&func_96m_fclk>;
 		ti,bit-shift = <8>;
 		reg = <0x1320>;
@@ -722,6 +812,7 @@
 	lli_txphy_clk: lli_txphy_clk@f20 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "lli_txphy_clk";
 		clocks = <&dpll_unipro1_clkdcoldo>;
 		ti,bit-shift = <8>;
 		reg = <0x0f20>;
@@ -730,6 +821,7 @@
 	lli_txphy_ls_clk: lli_txphy_ls_clk@f20 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "lli_txphy_ls_clk";
 		clocks = <&dpll_unipro1_m2_ck>;
 		ti,bit-shift = <9>;
 		reg = <0x0f20>;
@@ -738,6 +830,7 @@
 	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy_cm_clk32k";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0640>;
@@ -746,6 +839,7 @@
 	fdif_fclk: fdif_fclk@1328 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "fdif_fclk";
 		clocks = <&dpll_per_h11x2_ck>;
 		ti,bit-shift = <24>;
 		ti,max-div = <2>;
@@ -755,6 +849,7 @@
 	gpu_core_gclk_mux: gpu_core_gclk_mux@1520 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gpu_core_gclk_mux";
 		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1520>;
@@ -763,6 +858,7 @@
 	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1520 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gpu_hyd_gclk_mux";
 		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
 		ti,bit-shift = <25>;
 		reg = <0x1520>;
@@ -771,6 +867,7 @@
 	hsi_fclk: hsi_fclk@1638 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "hsi_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		ti,bit-shift = <24>;
 		ti,max-div = <2>;
@@ -781,6 +878,7 @@
 &cm_core_clockdomains {
 	l3init_clkdm: l3init_clkdm {
 		compatible = "ti,clockdomain";
+		clock-output-names = "l3init_clkdm";
 		clocks = <&dpll_usb_ck>;
 	};
 };
@@ -789,6 +887,7 @@
 	auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk0_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0310>;
@@ -797,6 +896,7 @@
 	auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk0_src_mux_ck";
 		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0310>;
@@ -805,12 +905,14 @@
 	auxclk0_src_ck: auxclk0_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk0_src_ck";
 		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
 	};
 
 	auxclk0_ck: auxclk0_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk0_ck";
 		clocks = <&auxclk0_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -820,6 +922,7 @@
 	auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk1_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0314>;
@@ -828,6 +931,7 @@
 	auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk1_src_mux_ck";
 		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0314>;
@@ -836,12 +940,14 @@
 	auxclk1_src_ck: auxclk1_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk1_src_ck";
 		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
 	};
 
 	auxclk1_ck: auxclk1_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk1_ck";
 		clocks = <&auxclk1_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -851,6 +957,7 @@
 	auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk2_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0318>;
@@ -859,6 +966,7 @@
 	auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk2_src_mux_ck";
 		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0318>;
@@ -867,12 +975,14 @@
 	auxclk2_src_ck: auxclk2_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk2_src_ck";
 		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
 	};
 
 	auxclk2_ck: auxclk2_ck@318 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk2_ck";
 		clocks = <&auxclk2_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -882,6 +992,7 @@
 	auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk3_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x031c>;
@@ -890,6 +1001,7 @@
 	auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk3_src_mux_ck";
 		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x031c>;
@@ -898,12 +1010,14 @@
 	auxclk3_src_ck: auxclk3_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk3_src_ck";
 		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
 	};
 
 	auxclk3_ck: auxclk3_ck@31c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk3_ck";
 		clocks = <&auxclk3_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -913,6 +1027,7 @@
 	auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-no-wait-gate-clock";
+		clock-output-names = "auxclk4_src_gate_ck";
 		clocks = <&dpll_core_m3x2_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0320>;
@@ -921,6 +1036,7 @@
 	auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,composite-mux-clock";
+		clock-output-names = "auxclk4_src_mux_ck";
 		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0320>;
@@ -929,12 +1045,14 @@
 	auxclk4_src_ck: auxclk4_src_ck {
 		#clock-cells = <0>;
 		compatible = "ti,composite-clock";
+		clock-output-names = "auxclk4_src_ck";
 		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
 	};
 
 	auxclk4_ck: auxclk4_ck@320 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "auxclk4_ck";
 		clocks = <&auxclk4_src_ck>;
 		ti,bit-shift = <16>;
 		ti,max-div = <16>;
@@ -944,6 +1062,7 @@
 	auxclkreq0_ck: auxclkreq0_ck@210 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq0_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0210>;
@@ -952,6 +1071,7 @@
 	auxclkreq1_ck: auxclkreq1_ck@214 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq1_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0214>;
@@ -960,6 +1080,7 @@
 	auxclkreq2_ck: auxclkreq2_ck@218 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq2_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x0218>;
@@ -968,6 +1089,7 @@
 	auxclkreq3_ck: auxclkreq3_ck@21c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "auxclkreq3_ck";
 		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
 		ti,bit-shift = <2>;
 		reg = <0x021c>;
@@ -977,6 +1099,7 @@
 &cm_core_aon {
 	mpu_cm: mpu_cm@300 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "mpu_cm";
 		reg = <0x300 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -984,6 +1107,7 @@
 
 		mpu_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "mpu_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -991,6 +1115,7 @@
 
 	dsp_cm: dsp_cm@400 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "dsp_cm";
 		reg = <0x400 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -998,6 +1123,7 @@
 
 		dsp_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "dsp_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1005,6 +1131,7 @@
 
 	abe_cm: abe_cm@500 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "abe_cm";
 		reg = <0x500 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1012,6 +1139,7 @@
 
 		abe_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "abe_clkctrl";
 			reg = <0x20 0x64>;
 			#clock-cells = <2>;
 		};
@@ -1022,6 +1150,7 @@
 &cm_core {
 	l3main1_cm: l3main1_cm@700 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3main1_cm";
 		reg = <0x700 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1029,6 +1158,7 @@
 
 		l3main1_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3main1_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1036,6 +1166,7 @@
 
 	l3main2_cm: l3main2_cm@800 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3main2_cm";
 		reg = <0x800 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1043,6 +1174,7 @@
 
 		l3main2_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3main2_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1050,6 +1182,7 @@
 
 	ipu_cm: ipu_cm@900 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "ipu_cm";
 		reg = <0x900 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1057,6 +1190,7 @@
 
 		ipu_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "ipu_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1064,6 +1198,7 @@
 
 	dma_cm: dma_cm@a00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "dma_cm";
 		reg = <0xa00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1071,6 +1206,7 @@
 
 		dma_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "dma_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1078,6 +1214,7 @@
 
 	emif_cm: emif_cm@b00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "emif_cm";
 		reg = <0xb00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1085,6 +1222,7 @@
 
 		emif_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "emif_clkctrl";
 			reg = <0x20 0x1c>;
 			#clock-cells = <2>;
 		};
@@ -1092,6 +1230,7 @@
 
 	l4cfg_cm: l4cfg_cm@d00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4cfg_cm";
 		reg = <0xd00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1099,6 +1238,7 @@
 
 		l4cfg_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l4cfg_clkctrl";
 			reg = <0x20 0x14>;
 			#clock-cells = <2>;
 		};
@@ -1106,6 +1246,7 @@
 
 	l3instr_cm: l3instr_cm@e00 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3instr_cm";
 		reg = <0xe00 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1113,26 +1254,30 @@
 
 		l3instr_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3instr_clkctrl";
 			reg = <0x20 0xc>;
 			#clock-cells = <2>;
 		};
 	};
 
-	l4per_cm: l4per_cm@1000 {
+	l4per_cm: clock@1000 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l4per_cm";
 		reg = <0x1000 0x200>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x1000 0x200>;
 
 		l4per_clkctrl: clock@20 {
-			compatible = "ti,clkctrl-l4per", "ti,clkctrl";
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4per_clkctrl";
 			reg = <0x20 0x15c>;
 			#clock-cells = <2>;
 		};
 
 		l4sec_clkctrl: clock@1a0 {
-			compatible = "ti,clkctrl-l4sec", "ti,clkctrl";
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4sec_clkctrl";
 			reg = <0x1a0 0x3c>;
 			#clock-cells = <2>;
 		};
@@ -1140,6 +1285,7 @@
 
 	dss_cm: dss_cm@1400 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "dss_cm";
 		reg = <0x1400 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1147,6 +1293,7 @@
 
 		dss_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "dss_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1154,6 +1301,7 @@
 
 	gpu_cm: gpu_cm@1500 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "gpu_cm";
 		reg = <0x1500 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1161,6 +1309,7 @@
 
 		gpu_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "gpu_clkctrl";
 			reg = <0x20 0x4>;
 			#clock-cells = <2>;
 		};
@@ -1168,6 +1317,7 @@
 
 	l3init_cm: l3init_cm@1600 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "l3init_cm";
 		reg = <0x1600 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1175,6 +1325,7 @@
 
 		l3init_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "l3init_clkctrl";
 			reg = <0x20 0xd4>;
 			#clock-cells = <2>;
 		};
@@ -1184,6 +1335,7 @@
 &prm {
 	wkupaon_cm: wkupaon_cm@1900 {
 		compatible = "ti,omap4-cm";
+		clock-output-names = "wkupaon_cm";
 		reg = <0x1900 0x100>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1191,6 +1343,7 @@
 
 		wkupaon_clkctrl: clk@20 {
 			compatible = "ti,clkctrl";
+			clock-output-names = "wkupaon_clkctrl";
 			reg = <0x20 0x5c>;
 			#clock-cells = <2>;
 		};
@@ -1201,6 +1354,7 @@
 	fref_xtal_ck: fref_xtal_ck {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "fref_xtal_ck";
 		clocks = <&sys_clkin>;
 		ti,bit-shift = <28>;
 		reg = <0x14>;
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64-alt.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-64-alt.dtsi
new file mode 100644
index 000000000000..650525867561
--- /dev/null
+++ b/arch/arm/boot/dts/openbmc-flash-layout-64-alt.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Bytedance.
+ */
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0xe0000>; // 896KB
+		label = "alt-u-boot";
+	};
+
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x20000>; // 128KB
+		label = "alt-u-boot-env";
+	};
+
+	kernel@100000 {
+		reg = <0x100000 0x900000>; // 9MB
+		label = "alt-kernel";
+	};
+
+	rofs@a00000 {
+		reg = <0xa00000 0x2000000>; // 32MB
+		label = "alt-rofs";
+	};
+
+	rwfs@6000000 {
+		reg = <0x2a00000 0x1600000>; // 22MB
+		label = "alt-rwfs";
+	};
+};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
index 91163867be34..7af41361c480 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
+++ b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
@@ -9,27 +9,27 @@ partitions {
 	#size-cells = <1>;
 
 	u-boot@0 {
-		reg = <0x0 0x60000>; // 384KB
+		reg = <0x0 0xe0000>; // 896KB
 		label = "u-boot";
 	};
 
-	u-boot-env@60000 {
-		reg = <0x60000 0x20000>; // 128KB
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x20000>; // 128KB
 		label = "u-boot-env";
 	};
 
-	kernel@80000 {
-		reg = <0x80000 0x500000>; // 5MB
+	kernel@100000 {
+		reg = <0x100000 0x900000>; // 9MB
 		label = "kernel";
 	};
 
-	rofs@580000 {
-		reg = <0x580000 0x2a80000>; // 42.5MB
+	rofs@a00000 {
+		reg = <0xa00000 0x2000000>; // 32MB
 		label = "rofs";
 	};
 
-	rwfs@3000000 {
-		reg = <0x3000000 0x1000000>; // 16MB
+	rwfs@2a00000 {
+		reg = <0x2a00000 0x1600000>; // 22MB
 		label = "rwfs";
 	};
 };
diff --git a/arch/arm/boot/dts/openbmc-flash-layout.dtsi b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
index 6c26524e93e1..b47e14063c38 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout.dtsi
+++ b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
@@ -20,7 +20,7 @@ partitions {
 		label = "kernel";
 	};
 
-	rofs@c0000 {
+	rofs@4c0000 {
 		reg = <0x4c0000 0x1740000>;
 		label = "rofs";
 	};
diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
index 422958d13d42..03471d30bfd9 100644
--- a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
+++ b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
index 0043e0040153..f17e25ac98dd 100644
--- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 
 /*
  * TODO: add Orion USB device port init when kernel.org support is added.
diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
index 0ca6208a267d..d57859998350 100644
--- a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
+++ b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/orion5x-mv88f5181.dtsi b/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
index f667012b26ca..819f9efb7058 100644
--- a/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
+++ b/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
 
 #include "orion5x.dtsi"
 
diff --git a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
index d1ed71c60209..86b87fb26dc9 100644
--- a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
+++ b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 
 #include "orion5x.dtsi"
 
diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
index ea081afa469d..fb203e7d37f5 100644
--- a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
+++ b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
 
 /dts-v1/;
 
@@ -142,8 +137,12 @@
 
 			port@3 {
 				reg = <3>;
-				label = "cpu";
 				ethernet = <&ethport>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
 			};
 
 			port@5 {
@@ -213,6 +212,7 @@
 		/* Hardwired to DSA switch */
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
index 487324f7c54e..fd78aa02a3c5 100644
--- a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
+++ b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index 61e631b3fd8b..2d41f5c166ee 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -1,10 +1,5 @@
-/*
- * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
index ff91561ca99c..eb555f385283 100644
--- a/arch/arm/boot/dts/owl-s500-roseapplepi.dts
+++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
@@ -2,7 +2,7 @@
 /*
  * Roseapple Pi
  *
- * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+ * Copyright (C) 2020-2021 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
  */
 
 /dts-v1/;
@@ -27,20 +27,140 @@
 		reg = <0x0 0x80000000>; /* 2GB */
 	};
 
-	/* Fixed regulator used in the absence of PMIC */
-	sd_vcc: sd-vcc {
+	syspwr: regulator-5v0 {
 		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.1V";
-		regulator-min-microvolt = <3100000>;
-		regulator-max-microvolt = <3100000>;
+		regulator-name = "SYSPWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
 	};
 };
 
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
 &i2c0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
+
+	atc260x: pmic@65 {
+		compatible = "actions,atc2603c";
+		reg = <0x65>;
+		interrupt-parent = <&sirq>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+		reset-time-sec = <6>;
+
+		regulators {
+			compatible = "actions,atc2603c-regulator";
+
+			dcdc1-supply = <&syspwr>;
+			dcdc2-supply = <&syspwr>;
+			dcdc3-supply = <&syspwr>;
+			ldo1-supply = <&syspwr>;
+			ldo2-supply = <&syspwr>;
+			ldo3-supply = <&syspwr>;
+			ldo5-supply = <&syspwr>;
+			ldo6-supply = <&syspwr>;
+			ldo7-supply = <&syspwr>;
+			ldo8-supply = <&syspwr>;
+			ldo11-supply = <&syspwr>;
+			ldo12-supply = <&syspwr>;
+			switchldo1-supply = <&vcc>;
+
+			vdd_cpu: dcdc1 {
+				regulator-name = "VDD_CPU";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			vddq: dcdc2 {
+				regulator-name = "VDDQ";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <2150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc: dcdc3 {
+				regulator-name = "VCC";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_3v3: ldo1 {
+				regulator-name = "VCC_3V3";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			avcc: ldo2 {
+				regulator-name = "AVCC";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_1v8: ldo3 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vcc_3v1: ldo5 {
+				regulator-name = "VCC_3V1";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			avdd: ldo6 {
+				regulator-name = "AVDD";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			sens_1v8: ldo7 {
+				regulator-name = "SENS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8: ldo8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			svcc: ldo11 {
+				regulator-name = "SVCC";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			rtc_vdd: ldo12 {
+				regulator-name = "RTC_VDD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			sd_vcc: switchldo1 {
+				regulator-name = "SD_VCC";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
 };
 
 &i2c1 {
@@ -105,6 +225,27 @@
 			bias-pull-down;
 		};
 	};
+
+	ethernet_pins: ethernet-pins {
+		eth_rmii-pinmux {
+			groups = "rmii_txd0_mfp", "rmii_txd1_mfp",
+				 "rmii_rxd0_mfp", "rmii_rxd1_mfp",
+				 "rmii_txen_mfp", "rmii_rxen_mfp",
+				 "rmii_crs_dv_mfp", "rmii_ref_clk_mfp";
+			function = "eth_rmii";
+		};
+
+		phy_clk-pinmux {
+			groups = "clko_25m_mfp";
+			function = "clko_25m";
+		};
+
+		ref_clk-pinconf {
+			groups = "rmii_ref_clk_drv";
+			drive-strength = <2>;
+		};
+
+	};
 };
 
 /* uSD */
@@ -121,6 +262,30 @@
 	vqmmc-supply = <&sd_vcc>;
 };
 
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&eth_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&pinctrl 88 GPIO_ACTIVE_LOW>; /* GPIOC24 */
+		reset-delay-us = <10000>;
+		reset-post-delay-us = <150000>;
+
+		eth_phy: ethernet-phy@3 {
+			reg = <0x3>;
+			max-speed = <100>;
+			interrupt-parent = <&sirq>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
 &twd_timer {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
index cd635f222d26..739b4b9cec8c 100644
--- a/arch/arm/boot/dts/owl-s500.dtsi
+++ b/arch/arm/boot/dts/owl-s500.dtsi
@@ -324,5 +324,15 @@
 			dma-names = "mmc";
 			status = "disabled";
 		};
+
+		ethernet: ethernet@b0310000 {
+			compatible = "actions,s500-emac", "actions,owl-emac";
+			reg = <0xb0310000 0x10000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_ETHERNET>, <&cmu CLK_RMII_REF>;
+			clock-names = "eth", "rmii";
+			resets = <&cmu RESET_ETHERNET>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/ox810se-wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts
deleted file mode 100644
index 7e2fcb220aea..000000000000
--- a/arch/arm/boot/dts/ox810se-wd-mbwe.dts
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/dts-v1/;
-#include "ox810se.dtsi"
-
-/ {
-	model = "Western Digital My Book World Edition";
-
-	compatible = "wd,mbwe", "oxsemi,ox810se";
-
-	chosen {
-		bootargs = "console=ttyS1,115200n8 earlyprintk=serial";
-	};
-
-	memory {
-		/* 128Mbytes DDR */
-		reg = <0x48000000 0x8000000>;
-	};
-
-	aliases {
-		serial1 = &uart1;
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		power {
-			label = "power";
-			gpios = <&gpio0 0 1>;
-			linux,code = <0x198>;
-		};
-
-		recovery {
-			label = "recovery";
-			gpios = <&gpio0 4 1>;
-			linux,code = <0xab>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		a0 {
-			label = "activity0";
-			gpios = <&gpio0 25 0>;
-			default-state = "keep";
-		};
-
-		a1 {
-			label = "activity1";
-			gpios = <&gpio0 26 0>;
-			default-state = "keep";
-		};
-
-		a2 {
-			label = "activity2";
-			gpios = <&gpio0 5 0>;
-			default-state = "keep";
-		};
-
-		a3 {
-			label = "activity3";
-			gpios = <&gpio0 6 0>;
-			default-state = "keep";
-		};
-
-		a4 {
-			label = "activity4";
-			gpios = <&gpio0 7 0>;
-			default-state = "keep";
-		};
-
-		a5 {
-			label = "activity5";
-			gpios = <&gpio1 2 0>;
-			default-state = "keep";
-		};
-	};
-
-	i2c-gpio {
-		compatible = "i2c-gpio";
-		gpios = <&gpio0 3 0 /* sda */
-			 &gpio0 2 0 /* scl */
-			 >;
-		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc0: rtc@48 {
-			compatible = "st,m41t00";
-			reg = <0x68>;
-		};
-	};
-};
-
-&uart1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-};
diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
deleted file mode 100644
index 0755e5864c4a..000000000000
--- a/arch/arm/boot/dts/ox810se.dtsi
+++ /dev/null
@@ -1,339 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include <dt-bindings/clock/oxsemi,ox810se.h>
-#include <dt-bindings/reset/oxsemi,ox810se.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "oxsemi,ox810se";
-
-	cpus {
-		#address-cells = <0>;
-		#size-cells = <0>;
-
-		cpu {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-			clocks = <&armclk>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		/* Max 256MB @ 0x48000000 */
-		reg = <0x48000000 0x10000000>;
-	};
-
-	clocks {
-		osc: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		gmacclk: gmacclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		rpsclk: rpsclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <1>;
-			clock-mult = <1>;
-			clocks = <&osc>;
-		};
-
-		pll400: pll400 {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <733333333>;
-		};
-
-		sysclk: sysclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&pll400>;
-		};
-
-		armclk: armclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&pll400>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&intc>;
-
-		apb-bridge@44000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x44000000 0x1000000>;
-
-			pinctrl: pinctrl {
-				compatible = "oxsemi,ox810se-pinctrl";
-
-				/* Regmap for sys registers */
-				oxsemi,sys-ctrl = <&sys>;
-
-				pinctrl_uart0: uart0 {
-					uart0a {
-						pins = "gpio31";
-						function = "fct3";
-					};
-					uart0b {
-						pins = "gpio32";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart0_modem: uart0_modem {
-					uart0c {
-						pins = "gpio27";
-						function = "fct3";
-					};
-					uart0d {
-						pins = "gpio28";
-						function = "fct3";
-					};
-					uart0e {
-						pins = "gpio29";
-						function = "fct3";
-					};
-					uart0f {
-						pins = "gpio30";
-						function = "fct3";
-					};
-					uart0g {
-						pins = "gpio33";
-						function = "fct3";
-					};
-					uart0h {
-						pins = "gpio34";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart1: uart1 {
-					uart1a {
-						pins = "gpio20";
-						function = "fct3";
-					};
-					uart1b {
-						pins = "gpio22";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart1_modem: uart1_modem {
-					uart1c {
-						pins = "gpio8";
-						function = "fct3";
-					};
-					uart1d {
-						pins = "gpio9";
-						function = "fct3";
-					};
-					uart1e {
-						pins = "gpio23";
-						function = "fct3";
-					};
-					uart1f {
-						pins = "gpio24";
-						function = "fct3";
-					};
-					uart1g {
-						pins = "gpio25";
-						function = "fct3";
-					};
-					uart1h {
-						pins = "gpio26";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart2: uart2 {
-					uart2a {
-						pins = "gpio6";
-						function = "fct3";
-					};
-					uart2b {
-						pins = "gpio7";
-						function = "fct3";
-					};
-				};
-
-				pinctrl_uart2_modem: uart2_modem {
-					uart2c {
-						pins = "gpio0";
-						function = "fct3";
-					};
-					uart2d {
-						pins = "gpio1";
-						function = "fct3";
-					};
-					uart2e {
-						pins = "gpio2";
-						function = "fct3";
-					};
-					uart2f {
-						pins = "gpio3";
-						function = "fct3";
-					};
-					uart2g {
-						pins = "gpio4";
-						function = "fct3";
-					};
-					uart2h {
-						pins = "gpio5";
-						function = "fct3";
-					};
-				};
-			};
-
-			gpio0: gpio@0 {
-				compatible = "oxsemi,ox810se-gpio";
-				reg = <0x000000 0x100000>;
-				interrupts = <21>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <32>;
-				oxsemi,gpio-bank = <0>;
-				gpio-ranges = <&pinctrl 0 0 32>;
-			};
-
-			gpio1: gpio@100000 {
-				compatible = "oxsemi,ox810se-gpio";
-				reg = <0x100000 0x100000>;
-				interrupts = <22>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <3>;
-				oxsemi,gpio-bank = <1>;
-				gpio-ranges = <&pinctrl 0 32 3>;
-			};
-
-			uart0: serial@200000 {
-			       compatible = "ns16550a";
-			       reg = <0x200000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <23>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART1>;
-			};
-
-			uart1: serial@300000 {
-			       compatible = "ns16550a";
-			       reg = <0x300000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <24>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART2>;
-			};
-
-			uart2: serial@900000 {
-			       compatible = "ns16550a";
-			       reg = <0x900000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <29>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART3>;
-			};
-
-			uart3: serial@a00000 {
-			       compatible = "ns16550a";
-			       reg = <0xa00000 0x100000>;
-			       clocks = <&sysclk>;
-			       interrupts = <30>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       resets = <&reset RESET_UART4>;
-			};
-		};
-
-		apb-bridge@45000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x45000000 0x1000000>;
-
-			sys: sys-ctrl@0 {
-				compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd";
-				reg = <0x000000 0x100000>;
-
-				reset: reset-controller {
-					compatible = "oxsemi,ox810se-reset";
-					#reset-cells = <1>;
-				};
-
-				stdclk: stdclk {
-					compatible = "oxsemi,ox810se-stdclk";
-					#clock-cells = <1>;
-				};
-			};
-
-			rps@300000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "simple-bus";
-				ranges = <0 0x300000 0x100000>;
-
-				intc: interrupt-controller@0 {
-					compatible = "oxsemi,ox810se-rps-irq";
-					interrupt-controller;
-					reg = <0 0x200>;
-					#interrupt-cells = <1>;
-					valid-mask = <0xffffffff>;
-					clear-mask = <0xffffffff>;
-				};
-
-				timer0: timer@200 {
-					compatible = "oxsemi,ox810se-rps-timer";
-					reg = <0x200 0x40>;
-					clocks = <&rpsclk>;
-					interrupts = <4 5>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
deleted file mode 100644
index c3daceccde55..000000000000
--- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-/dts-v1/;
-#include "ox820.dtsi"
-
-/ {
-	model = "Cloud Engines PogoPlug Series 3";
-
-	compatible = "cloudengines,pogoplugv3", "oxsemi,ox820";
-
-	chosen {
-		bootargs = "earlyprintk";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		/* 128Mbytes DDR */
-		reg = <0x60000000 0x8000000>;
-	};
-
-	aliases {
-		serial0 = &uart0;
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		blue {
-			label = "pogoplug:blue";
-			gpios = <&gpio0 2 0>;
-			default-state = "keep";
-		};
-
-		orange {
-			label = "pogoplug:orange";
-			gpios = <&gpio1 16 1>;
-			default-state = "keep";
-		};
-
-		green {
-			label = "pogoplug:green";
-			gpios = <&gpio1 17 1>;
-			default-state = "keep";
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart0>;
-};
-
-&nandc {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		nand-ecc-mode = "soft";
-		nand-ecc-algo = "hamming";
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00e00000>;
-			read-only;
-		};
-
-		partition@e00000 {
-			label = "ubi";
-			reg = <0x00e00000 0x07200000>;
-		};
-	};
-};
-
-&etha {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_etha_mdio>;
-};
diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi
deleted file mode 100644
index 90846a7655b4..000000000000
--- a/arch/arm/boot/dts/ox820.dtsi
+++ /dev/null
@@ -1,299 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC
- *
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/oxsemi,ox820.h>
-#include <dt-bindings/reset/oxsemi,ox820.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "oxsemi,ox820";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "oxsemi,ox820-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			clocks = <&armclk>;
-			reg = <0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,arm11mpcore";
-			clocks = <&armclk>;
-			reg = <1>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		/* Max 512MB @ 0x60000000 */
-		reg = <0x60000000 0x20000000>;
-	};
-
-	clocks {
-		osc: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		gmacclk: gmacclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <125000000>;
-		};
-
-		sysclk: sysclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clocks = <&osc>;
-		};
-
-		plla: plla {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <850000000>;
-		};
-
-		armclk: armclk {
-			compatible = "fixed-factor-clock";
-			#clock-cells = <0>;
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&plla>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		ranges;
-		interrupt-parent = <&gic>;
-
-		nandc: nand-controller@41000000 {
-			compatible = "oxsemi,ox820-nand";
-			reg = <0x41000000 0x100000>;
-			clocks = <&stdclk CLK_820_NAND>;
-			resets = <&reset RESET_NAND>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		etha: ethernet@40400000 {
-			compatible = "oxsemi,ox820-dwmac", "snps,dwmac";
-			reg = <0x40400000 0x2000>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq", "eth_wake_irq";
-			mac-address = [000000000000]; /* Filled in by U-Boot */
-			phy-mode = "rgmii";
-
-			clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>;
-			clock-names = "gmac", "stmmaceth";
-			resets = <&reset RESET_MAC>;
-
-			/* Regmap for sys registers */
-			oxsemi,sys-ctrl = <&sys>;
-
-			status = "disabled";
-		};
-
-		apb-bridge@44000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x44000000 0x1000000>;
-
-			pinctrl: pinctrl {
-				compatible = "oxsemi,ox820-pinctrl";
-
-				/* Regmap for sys registers */
-				oxsemi,sys-ctrl = <&sys>;
-
-				pinctrl_uart0: uart0 {
-					uart0 {
-						pins = "gpio30", "gpio31";
-						function = "fct5";
-					};
-				};
-
-				pinctrl_uart0_modem: uart0_modem {
-					uart0_modem_a {
-						pins = "gpio24", "gpio24", "gpio26", "gpio27";
-						function = "fct4";
-					};
-					uart0_modem_b {
-						pins = "gpio28", "gpio29";
-						function = "fct5";
-					};
-				};
-
-				pinctrl_uart1: uart1 {
-					uart1 {
-						pins = "gpio7", "gpio8";
-						function = "fct4";
-					};
-				};
-
-				pinctrl_uart1_modem: uart1_modem {
-					uart1_modem {
-						pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43";
-						function = "fct4";
-					};
-				};
-
-				pinctrl_etha_mdio: etha_mdio {
-					etha_mdio {
-						pins = "gpio3", "gpio4";
-						function = "fct1";
-					};
-				};
-
-				pinctrl_nand: nand {
-					nand {
-						pins = "gpio12", "gpio13", "gpio14", "gpio15",
-						     "gpio16", "gpio17", "gpio18", "gpio19",
-						     "gpio20", "gpio21", "gpio22", "gpio23",
-						     "gpio24";
-						function = "fct1";
-					};
-				};
-			};
-
-			gpio0: gpio@0 {
-				compatible = "oxsemi,ox820-gpio";
-				reg = <0x000000 0x100000>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <32>;
-				oxsemi,gpio-bank = <0>;
-				gpio-ranges = <&pinctrl 0 0 32>;
-			};
-
-			gpio1: gpio@100000 {
-				compatible = "oxsemi,ox820-gpio";
-				reg = <0x100000 0x100000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				ngpios = <18>;
-				oxsemi,gpio-bank = <1>;
-				gpio-ranges = <&pinctrl 0 32 18>;
-			};
-
-			uart0: serial@200000 {
-			       compatible = "ns16550a";
-			       reg = <0x200000 0x100000>;
-			       interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       clocks = <&sysclk>;
-			       resets = <&reset RESET_UART1>;
-			};
-
-			uart1: serial@300000 {
-			       compatible = "ns16550a";
-			       reg = <0x200000 0x100000>;
-			       interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			       reg-shift = <0>;
-			       fifo-size = <16>;
-			       reg-io-width = <1>;
-			       current-speed = <115200>;
-			       no-loopback-test;
-			       status = "disabled";
-			       clocks = <&sysclk>;
-			       resets = <&reset RESET_UART2>;
-			};
-
-			rps@400000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "simple-bus";
-				ranges = <0 0x400000 0x100000>;
-
-				intc: interrupt-controller@0 {
-					compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq";
-					interrupt-controller;
-					reg = <0 0x200>;
-					interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-					#interrupt-cells = <1>;
-					valid-mask = <0xffffffff>;
-					clear-mask = <0xffffffff>;
-				};
-
-				timer0: timer@200 {
-					compatible = "oxsemi,ox820-rps-timer";
-					reg = <0x200 0x40>;
-					clocks = <&sysclk>;
-					interrupt-parent = <&intc>;
-					interrupts = <4>;
-				};
-			};
-
-			sys: sys-ctrl@e00000 {
-				compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd";
-				reg = <0xe00000 0x200000>;
-
-				reset: reset-controller {
-					compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset";
-					#reset-cells = <1>;
-				};
-
-				stdclk: stdclk {
-					compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk";
-					#clock-cells = <1>;
-				};
-			};
-		};
-
-		apb-bridge@47000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0 0x47000000 0x1000000>;
-
-			scu: scu@0 {
-				compatible = "arm,arm11mp-scu";
-				reg = <0x0 0x100>;
-			};
-
-			local-timer@600 {
-				compatible = "arm,arm11mp-twd-timer";
-				reg = <0x600 0x20>;
-				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>;
-				clocks = <&armclk>;
-			};
-
-			gic: gic@1000 {
-				compatible = "arm,arm11mp-gic";
-				interrupt-controller;
-				#interrupt-cells = <3>;
-				reg = <0x1000 0x1000>,
-				      <0x100 0x500>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi
index 4fe7735c7c58..16212b912b94 100644
--- a/arch/arm/boot/dts/pxa168.dtsi
+++ b/arch/arm/boot/dts/pxa168.dtsi
@@ -53,6 +53,8 @@
 				compatible = "mrvl,mmp-timer";
 				reg = <0xd4014000 0x100>;
 				interrupts = <13>;
+				clocks = <&soc_clocks PXA168_CLK_TIMER>;
+				resets = <&soc_clocks PXA168_CLK_TIMER>;
 			};
 
 			uart1: serial@d4017000 {
diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi
index a248bf038033..5f8300e356ad 100644
--- a/arch/arm/boot/dts/pxa25x.dtsi
+++ b/arch/arm/boot/dts/pxa25x.dtsi
@@ -38,9 +38,12 @@
 			compatible = "marvell,pdma-1.0";
 			reg = <0x40000000 0x10000>;
 			interrupts = <25>;
-			#dma-channels = <16>;
 			#dma-cells = <2>;
+			/* For backwards compatibility: */
+			#dma-channels = <16>;
+			dma-channels = <16>;
 			#dma-requests = <40>;
+			dma-requests = <40>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index ccbecad9c5c7..a2cbfb3be609 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -12,9 +12,12 @@
 			compatible = "marvell,pdma-1.0";
 			reg = <0x40000000 0x10000>;
 			interrupts = <25>;
-			#dma-channels = <32>;
 			#dma-cells = <2>;
+			/* For backwards compatibility: */
+			#dma-channels = <32>;
+			dma-channels = <32>;
 			#dma-requests = <75>;
+			dma-requests = <75>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
index 8a6721d436bd..147c99191dc2 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
+++ b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
@@ -189,31 +189,31 @@
 
 		regulators {
 			regulator-v3 {
-				regulator-compatible= "V3(DCDC)";
+				regulator-compatible = "V3(DCDC)";
 				regulator-min-microvolt = <725000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
 			regulator-v4 {
-				regulator-compatible= "V4(DCDC)";
+				regulator-compatible = "V4(DCDC)";
 				regulator-min-microvolt = <725000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
 			regulator-v5 {
-				regulator-compatible= "V5(LDO)";
+				regulator-compatible = "V5(LDO)";
 				regulator-min-microvolt = <1700000>;
 				regulator-max-microvolt = <2000000>;
 			};
 
 			reg_vcc_sdio: regulator-v6 {
-				regulator-compatible= "V6(LDO)";
+				regulator-compatible = "V6(LDO)";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			regulator-v7 {
-				regulator-compatible= "V7(LDO)";
+				regulator-compatible = "V7(LDO)";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 			};
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index d19674812cd2..f9c216f91865 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -122,9 +122,12 @@
 			compatible = "marvell,pdma-1.0";
 			reg = <0x40000000 0x10000>;
 			interrupts = <25>;
-			#dma-channels = <32>;
 			#dma-cells = <2>;
+			/* For backwards compatibility: */
+			#dma-channels = <32>;
+			dma-channels = <32>;
 			#dma-requests = <100>;
+			dma-requests = <100>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/qcom-apq8016-sbc.dts b/arch/arm/boot/dts/qcom-apq8016-sbc.dts
new file mode 100644
index 000000000000..4ccd2dca74a2
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8016-sbc.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/apq8016-sbc.dts"
diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
new file mode 100644
index 000000000000..7a80e1c9f126
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+
+/ {
+	model = "ASUS ZenWatch 2";
+	compatible = "asus,sparrow", "qcom,apq8026";
+	chassis-type = "watch";
+	qcom,msm-id = <199 0x20000>;
+	qcom,board-id = <8 3005>;
+
+	reserved-memory {
+		sbl_region: sbl@2f00000 {
+			reg = <0x02f00000 0x100000>;
+			no-map;
+		};
+		external_image_region: external-image@3100000 {
+			reg = <0x3100000 0x200000>;
+			no-map;
+		};
+		peripheral_region: peripheral@3300000 {
+			reg = <0x3300000 0x600000>;
+			no-map;
+		};
+		adsp_region: adsp@3900000 {
+			reg = <0x3900000 0x1400000>;
+			no-map;
+		};
+		modem_region: modem@4d00000 {
+			reg = <0x4d00000 0x1b00000>;
+			no-map;
+		};
+		modem_efs_region: modem-efs@7f00000 {
+			reg = <0x7f00000 0x100000>;
+			no-map;
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_default_state>;
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&blsp1_uart1_default_state>;
+
+	bluetooth {
+		compatible = "brcm,bcm43430a1-bt";
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bluetooth_default_state>;
+
+		host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pm8226_vib {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <1900000>;
+		};
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+};
+
+&sdhc_3 {
+	status = "okay";
+
+	max-frequency = <100000000>;
+	non-removable;
+
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_hostwake_default_state>;
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1500000>;
+	qcom,fast-charge-current-limit = <350000>;
+	qcom,fast-charge-safe-voltage = <4430000>;
+	qcom,fast-charge-high-threshold-voltage = <4400000>;
+	qcom,auto-recharge-threshold-voltage = <4300000>;
+	qcom,minimum-input-voltage = <4400000>;
+};
+
+&tlmm {
+	blsp1_uart1_default_state: blsp1-uart1-default-state {
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "blsp_uart1";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	bluetooth_default_state: bluetooth-default-state {
+		pins = "gpio48", "gpio61";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		input-enable;
+	};
+
+	wlan_hostwake_default_state: wlan-hostwake-default-state {
+		pins = "gpio46";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	wlan_regulator_default_state: wlan-regulator-default-state {
+		pins = "gpio35";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	status = "okay";
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts
new file mode 100644
index 000000000000..d64096028ab1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+
+/ {
+	model = "Huawei Watch";
+	compatible = "huawei,sturgeon", "qcom,apq8026";
+	chassis-type = "watch";
+	qcom,msm-id = <199 0x20000>;
+	qcom,board-id = <8 4>;
+
+	reserved-memory {
+		sbl_region: sbl@2f00000 {
+			reg = <0x02f00000 0x100000>;
+			no-map;
+		};
+
+		external_image_region: external-image@3100000 {
+			reg = <0x3100000 0x200000>;
+			no-map;
+		};
+
+		peripheral_region: peripheral@3300000 {
+			reg = <0x3300000 0x600000>;
+			no-map;
+		};
+
+		adsp_region: adsp@3900000 {
+			reg = <0x3900000 0x1400000>;
+			no-map;
+		};
+
+		modem_region: modem@4d00000 {
+			reg = <0x4d00000 0x1b00000>;
+			no-map;
+		};
+
+		modem_efs_region: modem-efs@7f00000 {
+			reg = <0x7f00000 0x100000>;
+			no-map;
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_default_state>;
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&blsp1_i2c5 {
+	clock-frequency = <384000>;
+
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l19>;
+		vio-supply = <&pm8226_lvs1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_default_state>;
+
+		syna,startup-delay-ms = <160>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&blsp1_uart4_default_state>;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43430a0-bt";
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bluetooth_default_state>;
+
+		host-wakeup-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_3 {
+	max-frequency = <100000000>;
+	non-removable;
+
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_hostwake_default_state>;
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-voltage = <4370000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,minimum-input-voltage = <4350000>;
+	qcom,fast-charge-current-limit = <300000>;
+	qcom,fast-charge-safe-current = <600000>;
+	qcom,auto-recharge-threshold-voltage = <4240000>;
+};
+
+&tlmm {
+	blsp1_uart4_default_state: blsp1-uart4-default-state {
+		pins = "gpio12", "gpio13", "gpio14", "gpio15";
+		function = "blsp_uart4";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	bluetooth_default_state: bluetooth-default-state {
+		pins = "gpio63", "gpio64";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	touch_default_state: touch-default-state {
+		irq-pins {
+			pins = "gpio17";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		reset-pins {
+			pins = "gpio16";
+			function = "gpio";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	wlan_hostwake_default_state: wlan-hostwake-default-state {
+		pins = "gpio66";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	wlan_regulator_default_state: wlan-regulator-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&usb {
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
new file mode 100644
index 000000000000..b82381229adf
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+
+/ {
+	model = "LG G Watch R";
+	compatible = "lg,lenok", "qcom,apq8026";
+	chassis-type = "watch";
+	qcom,board-id = <132 0x0a>;
+	qcom,msm-id = <199 0x20000>;
+
+	aliases {
+		serial0 = &blsp1_uart3;
+		serial1 = &blsp1_uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		sbl_region: sbl@2f00000 {
+			reg = <0x02f00000 0x100000>;
+			no-map;
+		};
+
+		external_image_region: external-image@3100000 {
+			reg = <0x03100000 0x200000>;
+			no-map;
+		};
+
+		adsp_region: adsp@3300000 {
+			reg = <0x03300000 0x1400000>;
+			no-map;
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_default_state>;
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27421";
+		reg = <0x55>;
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+	clock-frequency = <384000>;
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8226_l15>;
+		vio-supply = <&pm8226_l22>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&blsp1_uart4 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&blsp1_uart4_default_state>;
+
+	bluetooth {
+		compatible = "brcm,bcm43430a0-bt";
+
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bluetooth_default_state>;
+
+		host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2200000>;
+		};
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+		};
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+};
+
+&sdhc_3 {
+	status = "okay";
+
+	max-frequency = <100000000>;
+	non-removable;
+
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_hostwake_default_state>;
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <450000>;
+	qcom,fast-charge-current-limit = <400000>;
+	qcom,fast-charge-safe-voltage = <4350000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4240000>;
+	qcom,minimum-input-voltage = <4450000>;
+};
+
+&tlmm {
+	blsp1_uart4_default_state: blsp1-uart4-default-state {
+		pins = "gpio12", "gpio13", "gpio14", "gpio15";
+		function = "blsp_uart4";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	bluetooth_default_state: bluetooth-default-state {
+		pins = "gpio47", "gpio48";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	touch_pins: touch-state {
+		irq-pins {
+			pins = "gpio17";
+			function = "gpio";
+
+			drive-strength = <8>;
+			bias-pull-down;
+			input-enable;
+		};
+
+		reset-pins {
+			pins = "gpio16";
+			function = "gpio";
+
+			drive-strength = <8>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	wlan_hostwake_default_state: wlan-hostwake-default-state {
+		pins = "gpio37";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	wlan_regulator_default_state: wlan-regulator-default-state {
+		pins = "gpio46";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	status = "okay";
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom-apq8026-samsung-matisse-wifi.dts
new file mode 100644
index 000000000000..91b860e24681
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8026-samsung-matisse-wifi.dts
@@ -0,0 +1,520 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/delete-node/ &adsp_region;
+/delete-node/ &smem_region;
+
+/ {
+	model = "Samsung Galaxy Tab 4 10.1";
+	compatible = "samsung,matisse-wifi", "qcom,apq8026";
+	chassis-type = "tablet";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		display0 = &framebuffer0;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		stdout-path = "display0";
+
+		framebuffer0: framebuffer@3200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x03200000 0x800000>;
+			width = <1280>;
+			height = <800>;
+			stride = <(1280 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+			interrupts = <&tlmm 110 IRQ_TYPE_EDGE_FALLING>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <15>;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-home {
+			label = "Home";
+			gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	i2c-backlight {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&backlight_i2c_default_state>;
+		pinctrl-names = "default";
+
+		i2c-gpio,delay-us = <4>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		backlight@2c {
+			compatible = "ti,lp8556";
+			reg = <0x2c>;
+
+			dev-ctrl = /bits/ 8 <0x80>;
+			init-brt = /bits/ 8 <0x3f>;
+			pwm-period = <100000>;
+
+			pwms = <&backlight_pwm 0 100000>;
+			pwm-names = "lp8556";
+
+			rom-a0h {
+				rom-addr = /bits/ 8 <0xa0>;
+				rom-val = /bits/ 8 <0x44>;
+			};
+
+			rom-a1h {
+				rom-addr = /bits/ 8 <0xa1>;
+				rom-val = /bits/ 8 <0x6c>;
+			};
+
+			rom-a5h {
+				rom-addr = /bits/ 8 <0xa5>;
+				rom-val = /bits/ 8 <0x24>;
+			};
+		};
+	};
+
+	backlight_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+		clocks = <&mmcc CAMSS_GP0_CLK>;
+		pinctrl-0 = <&backlight_pwm_default_state>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_1p8v: regulator-tsp-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_1p8v";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en_default_state>;
+	};
+
+	reg_tsp_3p3v: regulator-tsp-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en1_default_state>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@3200000 {
+			reg = <0x03200000 0x800000>;
+			no-map;
+		};
+
+		mpss@8400000 {
+			reg = <0x08400000 0x1f00000>;
+			no-map;
+		};
+
+		mba@a300000 {
+			reg = <0x0a300000 0x100000>;
+			no-map;
+		};
+
+		reserved@cb00000 {
+			reg = <0x0cb00000 0x700000>;
+			no-map;
+		};
+
+		wcnss@d200000 {
+			reg = <0x0d200000 0x700000>;
+			no-map;
+		};
+
+		adsp_region: adsp@d900000 {
+			reg = <0x0d900000 0x1800000>;
+			no-map;
+		};
+
+		venus@f100000 {
+			reg = <0x0f100000 0x500000>;
+			no-map;
+		};
+
+		smem_region: smem@fa00000 {
+			reg = <0x0fa00000 0x100000>;
+			no-map;
+		};
+
+		reserved@fb00000 {
+			reg = <0x0fb00000 0x260000>;
+			no-map;
+		};
+
+		rfsa@fd60000 {
+			reg = <0x0fd60000 0x20000>;
+			no-map;
+		};
+
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	accelerometer@1d {
+		compatible = "st,lis2hh12";
+		reg = <0x1d>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default_state>;
+
+		st,drdy-int-pin = <1>;
+
+		vdd-supply = <&pm8226_l19>;
+		vddio-supply = <&pm8226_lvs1>;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	muic: usb-switch@25 {
+		compatible = "siliconmitus,sm5502-muic";
+		reg = <0x25>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&muic_int_default_state>;
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_int_rst_default_state>;
+
+		reset-gpios = <&pm8226_gpios 6 GPIO_ACTIVE_LOW>;
+
+		vdd-supply = <&reg_tsp_1p8v>;
+		vdda-supply = <&reg_tsp_3p3v>;
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8226-regulators";
+
+		pm8226_s3: s3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_s5: s5 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		pm8226_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8226_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l3: l3 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1337500>;
+			regulator-always-on;
+		};
+
+		pm8226_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l5: l5 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8226_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l7: l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1850000>;
+		};
+
+		pm8226_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8226_l9: l9 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8226_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l14: l14 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+		};
+
+		pm8226_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l16: l16 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8226_l17: l17 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		pm8226_l18: l18 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l20: l20 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8226_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8226_l23: l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8226_l24: l24 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8226_l25: l25 {
+			regulator-min-microvolt = <1775000>;
+			regulator-max-microvolt = <2125000>;
+		};
+
+		pm8226_l26: l26 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8226_l27: l27 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8226_l28: l28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8226_lvs1: lvs1 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8226_l17>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	bus-width = <8>;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8226_l18>;
+	vqmmc-supply = <&pm8226_l21>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&tlmm {
+	accel_int_default_state: accel-int-default-state {
+		pins = "gpio54";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_i2c_default_state: backlight-i2c-default-state {
+		pins = "gpio20", "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	backlight_pwm_default_state: backlight-pwm-default-state {
+		pins = "gpio33";
+		function = "gp0_clk";
+	};
+
+	muic_int_default_state: muic-int-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default_state: tsp-en-default-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en1_default_state: tsp-en1-default-state {
+		pins = "gpio73";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default_state: tsp-int-rst-default-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <10>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index dace8ffeb991..8e4b61e4d4b1 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -1,27 +1,7 @@
-/*
- * Copyright 2016 Linaro Ltd
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 #include "qcom-msm8660.dtsi"
@@ -101,860 +81,897 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
 	};
+};
 
-	soc {
-		pinctrl@800000 {
-			/* eMMMC pins, all 8 data lines connected */
-			dragon_sdcc1_pins: sdcc1 {
-				mux {
-					pins = "gpio159", "gpio160", "gpio161",
-					     "gpio162", "gpio163", "gpio164",
-					     "gpio165", "gpio166", "gpio167",
-					     "gpio168";
-					     function = "sdc1";
-				};
-				clk {
-					pins = "gpio167"; /* SDC1 CLK */
-					drive-strength = <16>;
-					bias-disable;
-				};
-				cmd {
-					pins = "gpio168"; /* SDC1 CMD */
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-				data {
-					/* SDC1 D0 to D7 */
-					pins = "gpio159", "gpio160", "gpio161", "gpio162",
-					     "gpio163", "gpio164", "gpio165", "gpio166";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
+&ebi2 {
+	/* The EBI2 will instantiate first, then populate its children */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_ebi2_pins>;
+	status = "okay";
 
-			/*
-			 * The SDCC3 pins are hardcoded (non-muxable) but need some pin
-			 * configuration.
-			 */
-			dragon_sdcc3_pins: sdcc3 {
-				clk {
-					pins = "sdc3_clk";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				cmd {
-					pins = "sdc3_cmd";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-				data {
-					pins = "sdc3_data";
-					drive-strength = <8>;
-					bias-pull-up;
-				};
-			};
+	/*
+	 * An on-board SMSC LAN9221 chip for "debug ethernet",
+	 * which is actually just an ordinary ethernet on the
+	 * EBI2. This has a 25MHz chrystal next to it, so no
+	 * clocking is needed.
+	 */
+	ethernet@2,0 {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		reg = <2 0x0 0x100>;
+		/*
+		 * The second interrupt is the PME interrupt
+		 * for network wakeup, connected to the TLMM.
+		 */
+		interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
+				    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+		vdd33a-supply = <&dragon_veth>;
+		vddvario-supply = <&dragon_vario>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_ethernet_gpios>;
+		phy-mode = "mii";
+		reg-io-width = <2>;
+		smsc,force-external-phy;
+		smsc,irq-push-pull;
+
+		/*
+		 * SLOW chipselect config
+		 * Delay 9 cycles (140ns@64MHz) between SMSC
+		 * LAN9221 Ethernet controller reads and writes
+		 * on CS2.
+		 */
+		qcom,xmem-recovery-cycles = <0>;
+		qcom,xmem-write-hold-cycles = <3>;
+		qcom,xmem-write-delta-cycles = <31>;
+		qcom,xmem-read-delta-cycles = <28>;
+		qcom,xmem-write-wait-cycles = <9>;
+		qcom,xmem-read-wait-cycles = <9>;
+	};
+};
 
-			/* Second SD card slot pins */
-			dragon_sdcc5_pins: sdcc5 {
-				mux {
-					pins = "gpio95", "gpio96", "gpio97",
-					    "gpio98", "gpio99", "gpio100";
-					function = "sdc5";
-				};
-				clk {
-					pins = "gpio97"; /* SDC5 CLK */
-					drive-strength = <16>;
-					bias-disable;
-				};
-				cmd {
-					pins = "gpio95"; /* SDC5 CMD */
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-				data {
-					/* SDC5 D0 to D3 */
-					pins = "gpio96", "gpio98", "gpio99", "gpio100";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
 
-			dragon_gsbi8_i2c_pins: gsbi8_i2c {
-				mux {
-					pins = "gpio64", "gpio65";
-					function = "gsbi8";
-				};
-				pinconf {
-					pins = "gpio64", "gpio65";
-					drive-strength = <16>;
-					/* These have external pull-up 2.2kOhm to 1.8V */
-					bias-disable;
-				};
-			};
+&gsbi3_i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi3_i2c_pins>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,cy8ctma340";
+		reg = <0x24>;
+		/* Certainly we can do at least 400 kHz */
+		clock-frequency = <400000>;
+		/* IRQ on GPIO61 called /CTP_INT */
+		interrupt-parent = <&tlmm>;
+		interrupts = <61 IRQ_TYPE_EDGE_FALLING>;
+		/*
+		 * The I2C bus is using a PCA9306 level translator from L16A
+		 * to L2B so these two voltages are needed and L16A is
+		 * kind of the IO voltage, however L16Aisn't really fed to
+		 * the TMA340, which relies entirely on L2B (PM8901 L2).
+		 */
+		vcpin-supply = <&pm8058_l16>;
+		vdd-supply = <&pm8901_l2>;
+		/* GPIO58, called WAKE_CTP */
+		reset-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <800>;
+		active-interval-ms = <0>;
+		touch-timeout-ms = <255>;
+		lowpower-interval-ms = <10>;
+		bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_tma340_gpios>;
+	};
+};
 
-			dragon_gsbi12_i2c_pins: gsbi12_i2c {
-				mux {
-					pins = "gpio115", "gpio116";
-					function = "gsbi12";
-				};
-				pinconf {
-					pins = "gpio115", "gpio116";
-					drive-strength = <16>;
-					/* These have external pull-up 4.7kOhm to 1.8V */
-					bias-disable;
-				};
-			};
+&gsbi8 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
 
-			/* Primary serial port uart 0 pins */
-			dragon_gsbi12_serial_pins: gsbi12_serial {
-				mux {
-					pins = "gpio117", "gpio118";
-					function = "gsbi12";
-				};
-				tx {
-					pins = "gpio117";
-					drive-strength = <8>;
-					bias-disable;
-				};
-				rx {
-					pins = "gpio118";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
+&gsbi8_i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
+	status = "okay";
+
+	eeprom@52 {
+		/* A 16KiB Platform ID EEPROM on the CPU carrier board */
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		vcc-supply = <&pm8058_s3>;
+		pagesize = <64>;
+	};
+	wm8903: wm8903@1a {
+		/* This Woolfson Micro device has an unrouted interrupt line */
+		compatible = "wlf,wm8903";
+		reg = <0x1a>;
+
+		AVDD-supply = <&pm8058_l16>;
+		CPVDD-supply = <&pm8058_l16>;
+		DBVDD-supply = <&pm8058_s3>;
+		DCVDD-supply = <&pm8058_l0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		micdet-cfg = <0>;
+		micdet-delay = <100>;
+		gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+	};
+};
 
-			dragon_ebi2_pins: ebi2 {
-				/*
-				 * Pins used by EBI2 on the Dragonboard, actually only
-				 * CS2 is used by a real peripheral. CS0 is just
-				 * routed to a test point.
-				 */
-				mux0 {
-					pins =
-					    /* "gpio39", CS1A_N this is not good to mux */
-					    "gpio40", /* CS2A_N */
-					    "gpio134"; /* CS0_N testpoint TP29 */
-					function = "ebi2cs";
-				};
-				mux1 {
-					pins =
-					    /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
-					    "gpio123", "gpio124", "gpio125", "gpio126",
-					    "gpio127", "gpio128", "gpio129", "gpio130",
-					    /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
-					    "gpio135", "gpio136", "gpio137", "gpio138",
-					    "gpio139", "gpio140", "gpio141", "gpio142",
-					    "gpio143", "gpio144", "gpio145", "gpio146",
-					    "gpio147", "gpio148", "gpio149", "gpio150",
-					    "gpio151", /* EBI2_OE_N */
-					    "gpio153", /* EBI2_ADV */
-					    "gpio157"; /* EBI2_WE_N */
-					function = "ebi2";
-				};
-			};
+&gsbi12 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi12_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi12_serial_pins>;
+	status = "okay";
+};
 
-			/* Interrupt line for the KXSD9 accelerometer */
-			dragon_kxsd9_gpios: kxsd9 {
-				irq {
-					pins = "gpio57"; /* IRQ line */
-					bias-pull-up;
-				};
+&gsbi12_i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
+	status = "okay";
+
+	ak8975@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+		interrupt-parent = <&pm8058_gpio>;
+		interrupts = <33 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_ak8975_gpios>;
+		vid-supply = <&pm8058_lvs0>; // 1.8V
+		vdd-supply = <&pm8058_l14>; // 2.85V
+	};
+	bmp085@77 {
+		compatible = "bosch,bmp085";
+		reg = <0x77>;
+		interrupt-parent = <&pm8058_gpio>;
+		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+		reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_bmp085_gpios>;
+		vddd-supply = <&pm8058_lvs0>; // 1.8V
+		vdda-supply = <&pm8058_l14>; // 2.85V
+	};
+	mpu3050@68 {
+		compatible = "invensense,mpu3050";
+		reg = <0x68>;
+		/*
+		 * GPIO17 is pulled high by a 10k
+		 * resistor to VLOGIC so needs to be
+		 * active low/falling edge.
+		 */
+		interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dragon_mpu3050_gpios>;
+		vlogic-supply = <&pm8058_lvs0>; // 1.8V
+		vdd-supply = <&pm8058_l14>; // 2.85V
+
+		/*
+		 * The MPU-3050 acts as a hub for the
+		 * accelerometer.
+		 */
+		i2c-gate {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			kxsd9@18 {
+				compatible = "kionix,kxsd9";
+				reg = <0x18>;
+				interrupt-parent = <&tlmm>;
+				interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&dragon_kxsd9_gpios>;
+				iovdd-supply = <&pm8058_lvs0>; // 1.8V
+				vdd-supply = <&pm8058_l14>; // 2.85V
 			};
 		};
+	};
+};
 
-		qcom,ssbi@500000 {
-			pmic@0 {
-				keypad@148 {
-					linux,keymap = <
-					MATRIX_KEY(0, 0, KEY_MENU)
-					MATRIX_KEY(0, 2, KEY_1)
-					MATRIX_KEY(0, 3, KEY_4)
-					MATRIX_KEY(0, 4, KEY_7)
-					MATRIX_KEY(1, 0, KEY_UP)
-					MATRIX_KEY(1, 1, KEY_LEFT)
-					MATRIX_KEY(1, 2, KEY_DOWN)
-					MATRIX_KEY(1, 3, KEY_5)
-					MATRIX_KEY(1, 3, KEY_8)
-					MATRIX_KEY(2, 0, KEY_HOME)
-					MATRIX_KEY(2, 1, KEY_REPLY)
-					MATRIX_KEY(2, 2, KEY_2)
-					MATRIX_KEY(2, 3, KEY_6)
-					MATRIX_KEY(3, 0, KEY_VOLUMEUP)
-					MATRIX_KEY(3, 1, KEY_RIGHT)
-					MATRIX_KEY(3, 2, KEY_3)
-					MATRIX_KEY(3, 3, KEY_9)
-					MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
-					MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
-					MATRIX_KEY(4, 1, KEY_BACK)
-					MATRIX_KEY(4, 2, KEY_CAMERA)
-					MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
-					>;
-					keypad,num-rows = <6>;
-					keypad,num-columns = <5>;
-				};
-
-				gpio@150 {
-					dragon_ethernet_gpios: ethernet-gpios {
-						pinconf {
-							pins = "gpio7";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_bmp085_gpios: bmp085-gpios {
-						pinconf {
-							pins = "gpio16";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_mpu3050_gpios: mpu3050-gpios {
-						pinconf {
-							pins = "gpio17";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_sdcc3_gpios: sdcc3-gpios {
-						pinconf {
-							pins = "gpio22";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_sdcc5_gpios: sdcc5-gpios {
-						pinconf {
-							pins = "gpio26";
-							function = "normal";
-							input-enable;
-							bias-pull-up;
-							qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_ak8975_gpios: ak8975-gpios {
-						pinconf {
-							pins = "gpio33";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_cm3605_gpios: cm3605-gpios {
-						/* Pin 34 connected to the proxy IRQ */
-						pinconf_gpio34 {
-							pins = "gpio34";
-							function = "normal";
-							input-enable;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-						/* Pin 35 connected to ASET */
-						pinconf_gpio35 {
-							pins = "gpio35";
-							function = "normal";
-							output-high;
-							bias-disable;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-					dragon_veth_gpios: veth-gpios {
-						pinconf {
-							pins = "gpio40";
-							function = "normal";
-							bias-disable;
-							drive-push-pull;
-						};
-					};
-				};
-
-				mpps@50 {
-					dragon_cm3605_mpps: cm3605-mpps {
-						pinconf {
-							pins = "mpp5";
-							function = "analog";
-							input-enable;
-							bias-high-impedance;
-							/* Let's use channel 5 */
-							qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
-							power-source = <PM8058_GPIO_S3>;
-						};
-					};
-				};
-
-				xoadc@197 {
-					/* Reference voltage 2.2 V */
-					xoadc-ref-supply = <&pm8058_l18>;
-
-					/* Board-specific channels */
-					mpp5@5 {
-						/* Connected to AOUT of ALS sensor */
-						reg = <0x00 0x05>;
-					};
-					mpp6@6 {
-						/* Connected to test point TP43 */
-						reg = <0x00 0x06>;
-					};
-					mpp7@7 {
-						/* Connected to battery thermistor */
-						reg = <0x00 0x07>;
-					};
-					mpp8@8 {
-						/* Connected to battery ID detector */
-						reg = <0x00 0x08>;
-					};
-					mpp9@9 {
-						/* Connected to XO thermistor */
-						reg = <0x00 0x09>;
-					};
-				};
-
-				led@48 {
-					/*
-					 * The keypad LED @0x48 is routed to
-					 * the sensor board where it is
-					 * connected to an infrared LED
-					 * SFH4650 (60mW, @850nm) next to the
-					 * ambient light and proximity sensor
-					 * Capella Microsystems CM3605.
-					 */
-					compatible = "qcom,pm8058-keypad-led";
-					reg = <0x48>;
-					label = "pm8058:infrared:proximitysensor";
-					default-state = "off";
-					linux,default-trigger = "cm3605";
-				};
-				led@131 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x131>;
-					label = "pm8058:red";
-					default-state = "off";
-				};
-				led@132 {
-					/*
-					 * This is actually green too on my
-					 * board, but documented as yellow.
-					 */
-					compatible = "qcom,pm8058-led";
-					reg = <0x132>;
-					label = "pm8058:yellow";
-					default-state = "off";
-					linux,default-trigger = "mmc0";
-				};
-				led@133 {
-					compatible = "qcom,pm8058-led";
-					reg = <0x133>;
-					label = "pm8058:green";
-					default-state = "on";
-					linux,default-trigger = "heartbeat";
-				};
-			};
+&pm8058_gpio {
+	dragon_ethernet_gpios: ethernet-state {
+		pinconf {
+			pins = "gpio7";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_bmp085_gpios: bmp085-state {
+		pinconf {
+			pins = "gpio16";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_mpu3050_gpios: mpu3050-state {
+		pinconf {
+			pins = "gpio17";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_sdcc3_gpios: sdcc3-state {
+		pinconf {
+			pins = "gpio22";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_sdcc5_gpios: sdcc5-state {
+		pinconf {
+			pins = "gpio26";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_ak8975_gpios: ak8975-state {
+		pinconf {
+			pins = "gpio33";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+	};
+	dragon_cm3605_gpios: cm3605-state {
+		/* Pin 34 connected to the proxy IRQ */
+		gpio34-pins {
+			pins = "gpio34";
+			function = "normal";
+			input-enable;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
+		};
+		/* Pin 35 connected to ASET */
+		gpio35-pins {
+			pins = "gpio35";
+			function = "normal";
+			output-high;
+			bias-disable;
+			power-source = <PM8058_GPIO_S3>;
 		};
+	};
+	dragon_veth_gpios: veth-state {
+		pinconf {
+			pins = "gpio40";
+			function = "normal";
+			bias-disable;
+			drive-push-pull;
+		};
+	};
+};
 
-		gsbi@19800000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
+&pm8058_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_MENU)
+		MATRIX_KEY(0, 2, KEY_1)
+		MATRIX_KEY(0, 3, KEY_4)
+		MATRIX_KEY(0, 4, KEY_7)
+		MATRIX_KEY(1, 0, KEY_UP)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+		MATRIX_KEY(1, 2, KEY_DOWN)
+		MATRIX_KEY(1, 3, KEY_5)
+		MATRIX_KEY(1, 3, KEY_8)
+		MATRIX_KEY(2, 0, KEY_HOME)
+		MATRIX_KEY(2, 1, KEY_REPLY)
+		MATRIX_KEY(2, 2, KEY_2)
+		MATRIX_KEY(2, 3, KEY_6)
+		MATRIX_KEY(3, 0, KEY_VOLUMEUP)
+		MATRIX_KEY(3, 1, KEY_RIGHT)
+		MATRIX_KEY(3, 2, KEY_3)
+		MATRIX_KEY(3, 3, KEY_9)
+		MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
+		MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
+		MATRIX_KEY(4, 1, KEY_BACK)
+		MATRIX_KEY(4, 2, KEY_CAMERA)
+		MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
+	>;
+	keypad,num-rows = <6>;
+	keypad,num-columns = <5>;
+};
 
-			i2c@19880000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
-
-				eeprom@52 {
-					/* A 16KiB Platform ID EEPROM on the CPU carrier board */
-					compatible = "atmel,24c128";
-					reg = <0x52>;
-					vcc-supply = <&pm8058_s3>;
-					pagesize = <64>;
-				};
-				wm8903: wm8903@1a {
-					/* This Woolfson Micro device has an unrouted interrupt line */
-					compatible = "wlf,wm8903";
-					reg = <0x1a>;
-
-					AVDD-supply = <&pm8058_l16>;
-					CPVDD-supply = <&pm8058_l16>;
-					DBVDD-supply = <&pm8058_s3>;
-					DCVDD-supply = <&pm8058_l0>;
-
-					gpio-controller;
-					#gpio-cells = <2>;
-
-					micdet-cfg = <0>;
-					micdet-delay = <100>;
-					gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
-				};
-			};
+&pm8058_led48 {
+	/*
+	 * The keypad LED @0x48 is routed to
+	 * the sensor board where it is
+	 * connected to an infrared LED
+	 * SFH4650 (60mW, @850nm) next to the
+	 * ambient light and proximity sensor
+	 * Capella Microsystems CM3605.
+	 */
+	label = "pm8058:infrared:proximitysensor";
+	default-state = "off";
+	linux,default-trigger = "cm3605";
+	status = "okay";
+};
+
+&pm8058_led131 {
+	label = "pm8058:red";
+	color = <LED_COLOR_ID_RED>;
+	default-state = "off";
+	status = "okay";
+};
+
+&pm8058_led132 {
+	/*
+	 * This is actually green too on my
+	 * board, but documented as yellow.
+	 */
+	label = "pm8058:yellow";
+	color = <LED_COLOR_ID_YELLOW>;
+	default-state = "off";
+	linux,default-trigger = "mmc0";
+	status = "okay";
+};
+
+&pm8058_led133 {
+	label = "pm8058:green";
+	function = LED_FUNCTION_HEARTBEAT;
+	color = <LED_COLOR_ID_GREEN>;
+	default-state = "on";
+	linux,default-trigger = "heartbeat";
+	status = "okay";
+};
+
+&pm8058_mpps {
+	dragon_cm3605_mpps: cm3605-mpps-state {
+		pins = "mpp5";
+		function = "analog";
+		input-enable;
+		bias-high-impedance;
+		/* Let's use channel 5 */
+		qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
+		power-source = <PM8058_GPIO_S3>;
+	};
+};
+
+&rpm {
+	/*
+	 * Set up of the PMIC RPM regulators for this board
+	 * PM8901 supplies "preliminary regulators" whatever
+	 * that means
+	 */
+	pm8901-regulators {
+		vdd_l0-supply = <&pm8901_s4>;
+		vdd_l1-supply = <&vph>;
+		vdd_l2-supply = <&vph>;
+		vdd_l3-supply = <&vph>;
+		vdd_l4-supply = <&vph>;
+		vdd_l5-supply = <&vph>;
+		vdd_l6-supply = <&vph>;
+		/* vdd_s0-supply, vdd_s1-supply: SAW regulators */
+		vdd_s2-supply = <&vph>;
+		vdd_s3-supply = <&vph>;
+		vdd_s4-supply = <&vph>;
+		lvs0_in-supply = <&pm8058_s3>;
+		lvs1_in-supply = <&pm8901_s4>;
+		lvs2_in-supply = <&pm8058_l0>;
+		lvs3_in-supply = <&pm8058_s2>;
+		mvs_in-supply = <&pm8058_s3>;
+
+		l0 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l1 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+		l2 {
+			/* TMA340 requires strictly 3.3V */
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+		l3 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
+		};
+		l4 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+		l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+		l6 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			bias-pull-down;
 		};
 
-		gsbi@19c00000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
+		/* s0 and s1 are SAW regulators controlled over SPM */
+		s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
 
-			serial@19c40000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi12_serial_pins>;
-			};
+		/* LVS0 thru 3 and mvs are just switches */
+		lvs0 {
+			regulator-always-on;
+		};
+		lvs1 { };
+		lvs2 { };
+		lvs3 { };
+		mvs { };
 
-			i2c@19c80000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
-
-				ak8975@c {
-					compatible = "asahi-kasei,ak8975";
-					reg = <0x0c>;
-					interrupt-parent = <&pm8058_gpio>;
-					interrupts = <33 IRQ_TYPE_EDGE_RISING>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_ak8975_gpios>;
-					vid-supply = <&pm8058_lvs0>; // 1.8V
-					vdd-supply = <&pm8058_l14>; // 2.85V
-				};
-				bmp085@77 {
-					compatible = "bosch,bmp085";
-					reg = <0x77>;
-					interrupt-parent = <&pm8058_gpio>;
-					interrupts = <16 IRQ_TYPE_EDGE_RISING>;
-					reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_bmp085_gpios>;
-					vddd-supply = <&pm8058_lvs0>; // 1.8V
-					vdda-supply = <&pm8058_l14>; // 2.85V
-				};
-				mpu3050@68 {
-					compatible = "invensense,mpu3050";
-					reg = <0x68>;
-					/*
-					 * GPIO17 is pulled high by a 10k
-					 * resistor to VLOGIC so needs to be
-					 * active low/falling edge.
-					 */
-					interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&dragon_mpu3050_gpios>;
-					vlogic-supply = <&pm8058_lvs0>; // 1.8V
-					vdd-supply = <&pm8058_l14>; // 2.85V
-
-					/*
-					 * The MPU-3050 acts as a hub for the
-					 * accelerometer.
-					 */
-					i2c-gate {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						kxsd9@18 {
-							compatible = "kionix,kxsd9";
-							reg = <0x18>;
-							interrupt-parent = <&tlmm>;
-							interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
-							pinctrl-names = "default";
-							pinctrl-0 = <&dragon_kxsd9_gpios>;
-							iovdd-supply = <&pm8058_lvs0>; // 1.8V
-							vdd-supply = <&pm8058_l14>; // 2.85V
-						};
-					};
-				};
-			};
+	};
+
+	pm8058-regulators {
+		vdd_l0_l1_lvs-supply = <&pm8058_s3>;
+		vdd_l2_l11_l12-supply = <&vph>;
+		vdd_l3_l4_l5-supply = <&vph>;
+		vdd_l6_l7-supply = <&vph>;
+		vdd_l8-supply = <&vph>;
+		vdd_l9-supply = <&vph>;
+		vdd_l10-supply = <&vph>;
+		vdd_l13_l16-supply = <&pm8058_s4>;
+		vdd_l14_l15-supply = <&vph>;
+		vdd_l17_l18-supply = <&vph>;
+		vdd_l19_l20-supply = <&vph>;
+		vdd_l21-supply = <&pm8058_s3>;
+		vdd_l22-supply = <&pm8058_s3>;
+		vdd_l23_l24_l25-supply = <&pm8058_s3>;
+		vdd_s0-supply = <&vph>;
+		vdd_s1-supply = <&vph>;
+		vdd_s2-supply = <&vph>;
+		vdd_s3-supply = <&vph>;
+		vdd_s4-supply = <&vph>;
+		vdd_ncp-supply = <&vph>;
+
+		l0 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+		l3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+		l4 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+		l5 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+		l6 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3600000>;
+			bias-pull-down;
+		};
+		l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+		l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3050000>;
+			bias-pull-down;
+		};
+		l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+		l10 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+		l11 {
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			bias-pull-down;
+		};
+		l12 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			bias-pull-down;
+		};
+		l13 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+			bias-pull-down;
+		};
+		l14 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+		l15 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+		l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+			regulator-always-on;
+		};
+		l17 {
+			// 1.5V according to schematic
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+		l18 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			bias-pull-down;
+		};
+		l19 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			bias-pull-down;
+		};
+		l20 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+		l21 {
+			// 1.1 V according to schematic
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+			regulator-always-on;
+		};
+		l22 {
+			// 1.2 V according to schematic
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+		l23 {
+			// Unused
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l24 {
+			// Unused
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+		l25 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
 		};
 
-		external-bus@1a100000 {
-			/* The EBI2 will instantiate first, then populate its children */
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&dragon_ebi2_pins>;
-
-			/*
-			 * An on-board SMSC LAN9221 chip for "debug ethernet",
-			 * which is actually just an ordinary ethernet on the
-			 * EBI2. This has a 25MHz chrystal next to it, so no
-			 * clocking is needed.
-			 */
-			ethernet-ebi2@2,0 {
-				compatible = "smsc,lan9221", "smsc,lan9115";
-				reg = <2 0x0 0x100>;
-				/*
-				 * The second interrupt is the PME interrupt
-				 * for network wakeup, connected to the TLMM.
-				 */
-				interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
-						    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
-				reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
-				vdd33a-supply = <&dragon_veth>;
-				vddvario-supply = <&dragon_vario>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_ethernet_gpios>;
-				phy-mode = "mii";
-				reg-io-width = <2>;
-				smsc,force-external-phy;
-				/* IRQ on edge falling = active low */
-				smsc,irq-active-low;
-				smsc,irq-push-pull;
-
-				/*
-				 * SLOW chipselect config
-				 * Delay 9 cycles (140ns@64MHz) between SMSC
-				 * LAN9221 Ethernet controller reads and writes
-				 * on CS2.
-				 */
-				qcom,xmem-recovery-cycles = <0>;
-				qcom,xmem-write-hold-cycles = <3>;
-				qcom,xmem-write-delta-cycles = <31>;
-				qcom,xmem-read-delta-cycles = <28>;
-				qcom,xmem-write-wait-cycles = <9>;
-				qcom,xmem-read-wait-cycles = <9>;
-			};
+		s0 {
+			// regulator-min-microvolt = <500000>;
+			// regulator-max-microvolt = <1325000>;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s1 {
+			// regulator-min-microvolt = <500000>;
+			// regulator-max-microvolt = <1250000>;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s2 {
+			// 1.3 V according to schematic
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+		s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			regulator-always-on;
+			bias-pull-down;
+		};
+		s4 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+			regulator-always-on;
+			bias-pull-down;
 		};
 
-		rpm@104000 {
-			/*
-			 * Set up of the PMIC RPM regulators for this board
-			 * PM8901 supplies "preliminary regulators" whatever
-			 * that means
-			 */
-			pm8901-regulators {
-				vdd_l0-supply = <&pm8901_s4>;
-				vdd_l1-supply = <&vph>;
-				vdd_l2-supply = <&vph>;
-				vdd_l3-supply = <&vph>;
-				vdd_l4-supply = <&vph>;
-				vdd_l5-supply = <&vph>;
-				vdd_l6-supply = <&vph>;
-				/* vdd_s0-supply, vdd_s1-supply: SAW regulators */
-				vdd_s2-supply = <&vph>;
-				vdd_s3-supply = <&vph>;
-				vdd_s4-supply = <&vph>;
-				lvs0_in-supply = <&pm8058_s3>;
-				lvs1_in-supply = <&pm8901_s4>;
-				lvs2_in-supply = <&pm8058_l0>;
-				lvs3_in-supply = <&pm8058_s2>;
-				mvs_in-supply = <&pm8058_s3>;
-
-				l0 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l1 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-				l2 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-				l3 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-				l4 {
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l6 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					bias-pull-down;
-				};
-
-				/* s0 and s1 are SAW regulators controlled over SPM */
-				s2 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s3 {
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s4 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				/* LVS0 thru 3 and mvs0 are just switches */
-				lvs0 {
-					regulator-always-on;
-				};
-				lvs1 { };
-				lvs2 { };
-				lvs3 { };
-				mvs0 {};
+		/* LVS0 and LVS1 are just switches */
+		lvs0 {
+			bias-pull-down;
+		};
+		lvs1 {
+			bias-pull-down;
+		};
 
-			};
+		ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
 
-			pm8058-regulators {
-				vdd_l0_l1_lvs-supply = <&pm8058_s3>;
-				vdd_l2_l11_l12-supply = <&vph>;
-				vdd_l3_l4_l5-supply = <&vph>;
-				vdd_l6_l7-supply = <&vph>;
-				vdd_l8-supply = <&vph>;
-				vdd_l9-supply = <&vph>;
-				vdd_l10-supply = <&vph>;
-				vdd_l13_l16-supply = <&pm8058_s4>;
-				vdd_l14_l15-supply = <&vph>;
-				vdd_l17_l18-supply = <&vph>;
-				vdd_l19_l20-supply = <&vph>;
-				vdd_l21-supply = <&pm8058_s3>;
-				vdd_l22-supply = <&pm8058_s3>;
-				vdd_l23_l24_l25-supply = <&pm8058_s3>;
-				vdd_s0-supply = <&vph>;
-				vdd_s1-supply = <&vph>;
-				vdd_s2-supply = <&vph>;
-				vdd_s3-supply = <&vph>;
-				vdd_s4-supply = <&vph>;
-				vdd_ncp-supply = <&vph>;
-
-				l0 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l1 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l2 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l3 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l4 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l5 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l6 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3600000>;
-					bias-pull-down;
-				};
-				l7 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l8 {
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <3050000>;
-					bias-pull-down;
-				};
-				l9 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l10 {
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l11 {
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					bias-pull-down;
-				};
-				l12 {
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <2900000>;
-					bias-pull-down;
-				};
-				l13 {
-					regulator-min-microvolt = <2050000>;
-					regulator-max-microvolt = <2050000>;
-					bias-pull-down;
-				};
-				l14 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-				};
-				l15 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-				l16 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-					regulator-always-on;
-				};
-				l17 {
-					// 1.5V according to schematic
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-				l18 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					bias-pull-down;
-				};
-				l19 {
-					regulator-min-microvolt = <2500000>;
-					regulator-max-microvolt = <2500000>;
-					bias-pull-down;
-				};
-				l20 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-				l21 {
-					// 1.1 V according to schematic
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-					regulator-always-on;
-				};
-				l22 {
-					// 1.2 V according to schematic
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-				l23 {
-					// Unused
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l24 {
-					// Unused
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-				l25 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				s0 {
-					// regulator-min-microvolt = <500000>;
-					// regulator-max-microvolt = <1325000>;
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s1 {
-					// regulator-min-microvolt = <500000>;
-					// regulator-max-microvolt = <1250000>;
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s2 {
-					// 1.3 V according to schematic
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1400000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-				s3 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					regulator-always-on;
-					bias-pull-down;
-				};
-				s4 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-					regulator-always-on;
-					bias-pull-down;
-				};
-
-				/* LVS0 and LVS1 are just switches */
-				lvs0 {
-					bias-pull-down;
-				};
-				lvs1 {
-					bias-pull-down;
-				};
-
-				ncp {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-			};
+/* Internal 3.69 GiB eMMC */
+&sdcc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_sdcc1_pins>;
+	vmmc-supply = <&pm8901_l5>;
+	vqmmc-supply = <&pm8901_lvs0>;
+	status = "okay";
+};
+
+/* External micro SD card, directly connected, pulled up to 2.85 V */
+&sdcc3 {
+	/* Enable SSBI GPIO 22 as input, use for card detect */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
+	cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8058_l14>;
+	status = "okay";
+};
+
+/*
+ * Second external micro SD card, using two TXB104RGYR levelshifters
+ * to lift from 1.8 V to 2.85 V
+ */
+&sdcc5 {
+	/* Enable SSBI GPIO 26 as input, use for card detect */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
+	cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8058_l14>;
+	vqmmc-supply = <&dragon_vio_txb>;
+	status = "okay";
+};
+
+&tlmm {
+	/* eMMC pins, all 8 data lines connected */
+	dragon_sdcc1_pins: sdcc1-state {
+		clk-pins {
+			pins = "gpio167"; /* SDC1 CLK */
+			function = "sdc1";
+			drive-strength = <16>;
+			bias-disable;
 		};
-		amba {
-			/* Internal 3.69 GiB eMMC */
-			sdcc@12400000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_sdcc1_pins>;
-				vmmc-supply = <&pm8901_l5>;
-				vqmmc-supply = <&pm8901_lvs0>;
-			};
+		cmd-pins {
+			pins = "gpio168"; /* SDC1 CMD */
+			function = "sdc1";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+		data-pins {
+			/* SDC1 D0 to D7 */
+			pins = "gpio159", "gpio160", "gpio161", "gpio162",
+			     "gpio163", "gpio164", "gpio165", "gpio166";
+			function = "sdc1";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
 
-			/* External micro SD card, directly connected, pulled up to 2.85 V */
-			sdcc@12180000 {
-				status = "okay";
-				/* Enable SSBI GPIO 22 as input, use for card detect */
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
-				cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
-				wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
-				vmmc-supply = <&pm8058_l14>;
-			};
+	/*
+	 * The SDCC3 pins are hardcoded (non-muxable) but need some pin
+	 * configuration.
+	 */
+	dragon_sdcc3_pins: sdcc3-state {
+		clk-pins {
+			pins = "sdc3_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		cmd-pins {
+			pins = "sdc3_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		data-pins {
+			pins = "sdc3_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
 
-			/*
-			 * Second external micro SD card, using two TXB104RGYR levelshifters
-			 * to lift from 1.8 V to 2.85 V
-			 */
-			sdcc@12200000 {
-				status = "okay";
-				/* Enable SSBI GPIO 26 as input, use for card detect */
-				pinctrl-names = "default";
-				pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
-				cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
-				wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
-				vmmc-supply = <&pm8058_l14>;
-				vqmmc-supply = <&dragon_vio_txb>;
-			};
+	/* Second SD card slot pins */
+	dragon_sdcc5_pins: sdcc5-state {
+		clk-pins {
+			pins = "gpio97"; /* SDC5 CLK */
+			function = "sdc5";
+			drive-strength = <16>;
+			bias-disable;
+		};
+		cmd-pins {
+			pins = "gpio95"; /* SDC5 CMD */
+			function = "sdc5";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+		data-pins {
+			/* SDC5 D0 to D3 */
+			pins = "gpio96", "gpio98", "gpio99", "gpio100";
+			function = "sdc5";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	dragon_gsbi3_i2c_pins: gsbi3-i2c-state {
+		pins = "gpio43", "gpio44";
+		function = "gsbi3";
+		drive-strength = <8>;
+		/* These have external pull-up 2.2kOhm to 1.8V */
+		bias-disable;
+	};
+
+	dragon_gsbi8_i2c_pins: gsbi8-i2c-state {
+		pins = "gpio64", "gpio65";
+		function = "gsbi8";
+		drive-strength = <16>;
+		/* These have external pull-up 2.2kOhm to 1.8V */
+		bias-disable;
+	};
+
+	dragon_gsbi12_i2c_pins: gsbi12-i2c-state {
+		pins = "gpio115", "gpio116";
+		function = "gsbi12";
+		drive-strength = <16>;
+		/* These have external pull-up 4.7kOhm to 1.8V */
+		bias-disable;
+	};
+
+	/* Primary serial port uart 0 pins */
+	dragon_gsbi12_serial_pins: gsbi12-serial-state {
+		tx-pins {
+			pins = "gpio117";
+			function = "gsbi12";
+			drive-strength = <8>;
+			bias-disable;
+		};
+		rx-pins {
+			pins = "gpio118";
+			function = "gsbi12";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	dragon_ebi2_pins: ebi2-state {
+		/*
+		 * Pins used by EBI2 on the Dragonboard, actually only
+		 * CS2 is used by a real peripheral. CS0 is just
+		 * routed to a test point.
+		 */
+		mux0-pins {
+			pins =
+			    /* "gpio39", CS1A_N this is not good to mux */
+			    "gpio40", /* CS2A_N */
+			    "gpio134"; /* CS0_N testpoint TP29 */
+			function = "ebi2cs";
+		};
+		mux1-pins {
+			pins =
+			    /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
+			    "gpio123", "gpio124", "gpio125", "gpio126",
+			    "gpio127", "gpio128", "gpio129", "gpio130",
+			    /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */
+			    "gpio135", "gpio136", "gpio137", "gpio138",
+			    "gpio139", "gpio140", "gpio141", "gpio142",
+			    "gpio143", "gpio144", "gpio145", "gpio146",
+			    "gpio147", "gpio148", "gpio149", "gpio150",
+			    "gpio151", /* EBI2_OE_N */
+			    "gpio153", /* EBI2_ADV */
+			    "gpio157"; /* EBI2_WE_N */
+			function = "ebi2";
+		};
+	};
+
+	/* Interrupt line for the KXSD9 accelerometer */
+	dragon_kxsd9_gpios: kxsd9-state {
+		pins = "gpio57"; /* IRQ line */
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	dragon_tma340_gpios: tma340-state {
+		reset-pins {
+			/* RESET line, TS_ATTN, WAKE_CTP */
+			pins = "gpio58";
+			function = "gpio";
+			drive-strength = <6>;
+			bias-disable;
 		};
+		irq-pins {
+			pins = "gpio61"; /* IRQ line */
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&xoadc {
+	/* Reference voltage 2.2 V */
+	xoadc-ref-supply = <&pm8058_l18>;
+
+	/* Board-specific channels */
+	mpp5@5 {
+		/* Connected to AOUT of ALS sensor */
+		reg = <0x00 0x05>;
+	};
+	mpp6@6 {
+		/* Connected to test point TP43 */
+		reg = <0x00 0x06>;
+	};
+	mpp7@7 {
+		/* Connected to battery thermistor */
+		reg = <0x00 0x07>;
+	};
+	mpp8@8 {
+		/* Connected to battery ID detector */
+		reg = <0x00 0x08>;
+	};
+	mpp9@9 {
+		/* Connected to XO thermistor */
+		reg = <0x00 0x09>;
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index 3bce47d16ab3..c57c27cd8a20 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -6,6 +6,7 @@
 / {
 	model = "Asus Nexus7(flo)";
 	compatible = "asus,nexus7-flo", "qcom,apq8064";
+	chassis-type = "tablet";
 
 	aliases {
 		serial0 = &gsbi7_serial;
@@ -21,16 +22,16 @@
 		#size-cells = <1>;
 		ranges;
 
-		ramoops@88d00000{
+		ramoops@88d00000 {
 			compatible = "ramoops";
 			reg = <0x88d00000 0x100000>;
-			record-size     = <0x00020000>;
-			console-size    = <0x00020000>;
-			ftrace-size     = <0x00020000>;
+			record-size = <0x00020000>;
+			console-size = <0x00020000>;
+			ftrace-size = <0x00020000>;
 		};
 	};
 
-	ext_3p3v: regulator-fixed@1 {
+	ext_3p3v: regulator-ext-3p3v {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -44,12 +45,12 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		volume_up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
-		volume_down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_VOLUMEDOWN>;
@@ -57,303 +58,291 @@
 	};
 
 	soc {
-		rpm@108000 {
-			regulators {
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vin_lvs2-supply = <&pm8921_s1>;
-
-				vdd_l26-supply = <&pm8921_s7>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-				vdd_ncp-supply = <&pm8921_l6>;
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				/* msm otg HSUSB_VDDCX */
-				s3 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <4800000>;
-				};
-
-				/*
-				 * msm_sdcc.1-sdc-vdd_io
-				 * tabla2x-slim-CDC_VDDA_RX
-				 * tabla2x-slim-CDC_VDDA_TX
-				 * tabla2x-slim-CDC_VDD_CP
-				 * tabla2x-slim-VDDIO_CDC
-				 */
-				s4 {
-					regulator-min-microvolt	= <1800000>;
-					regulator-max-microvolt	= <1800000>;
-					qcom,switch-mode-frequency = <3200000>;
-					regulator-always-on;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				/* mipi_dsi.1-dsi1_pll_vdda */
-				l2 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				/* msm_otg-HSUSB_3p3 */
-				l3 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3075000>;
-					bias-pull-down;
-				};
-
-				/* msm_otg-HSUSB_1p8 */
-				l4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				/* msm_sdcc.1-sdc_vdd */
-				l5 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					regulator-always-on;
-					bias-pull-down;
-				};
-
-				l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-				};
-
-				/* mipi_dsi.1-dsi1_avdd */
-				l11 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-					regulator-always-on;
-				};
-
-				/* pwm_power for backlight */
-				l17 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-				};
-
-				/* camera, qdsp6 */
-				l23 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				/*
-				 * tabla2x-slim-CDC_VDDA_A_1P2V
-				 * tabla2x-slim-VDDD_CDC_D
-				 */
-				l25 {
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-					bias-pull-down;
-				};
-
-				lvs1 {
-					bias-pull-down;
-				};
-
-				lvs4 {
-					bias-pull-down;
-				};
-
-				lvs5 {
-					bias-pull-down;
-				};
-
-				lvs6 {
-					bias-pull-down;
-				};
-				/*
-				 * mipi_dsi.1-dsi1_vddio
-				 * pil_riva-pll_vdd
-				 */
-				lvs7 {
-					bias-pull-down;
-				};
-			};
-		};
+		sram@2a03f000 {
+			compatible = "qcom,apq8064-imem", "syscon", "simple-mfd";
+			reg = <0x2a03f000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
 
-		mdp@5100000 {
-			status = "okay";
-			ports {
-				port@1 {
-					mdp_dsi1_out: endpoint {
-						remote-endpoint = <&dsi0_in>;
-					};
-				};
+				mode-normal = <0x77665501>;
+				mode-bootloader = <0x77665500>;
+				mode-recovery = <0x77665502>;
 			};
 		};
+	};
+};
 
-		dsi0: mdss_dsi@4700000 {
-			status = "okay";
-			vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
-			vdd-supply = <&pm8921_l8>;
-			vddio-supply = <&pm8921_lvs7>;
-			avdd-supply = <&pm8921_l11>;
-			vcss-supply = <&ext_3p3v>;
-
-			panel@0 {
-				reg = <0>;
-				compatible = "jdi,lt070me05000";
-
-				vddp-supply = <&pm8921_l17>;
-				iovcc-supply = <&pm8921_lvs7>;
-
-				enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
-				reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
-				dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
-
-				port {
-					panel_in: endpoint {
-						remote-endpoint = <&dsi0_out>;
-					};
-				};
-			};
-			ports {
-				port@0 {
-					dsi0_in: endpoint {
-						remote-endpoint = <&mdp_dsi1_out>;
-					};
-				};
-
-				port@1 {
-					dsi0_out: endpoint {
-						remote-endpoint = <&panel_in>;
-						data-lanes = <0 1 2 3>;
-					};
-				};
+&dsi0 {
+	vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
+	vdd-supply = <&pm8921_l8>;
+	vddio-supply = <&pm8921_lvs7>;
+	avdd-supply = <&pm8921_l11>;
+	status = "okay";
+
+	panel@0 {
+		reg = <0>;
+		compatible = "jdi,lt070me05000";
+
+		vddp-supply = <&pm8921_l17>;
+		iovcc-supply = <&pm8921_lvs7>;
+
+		enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+		dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
 			};
 		};
+	};
+};
+
+&dsi0_in {
+	remote-endpoint = <&mdp_dsi1_out>;
+};
+
+&dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+	vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
+	status = "okay";
+};
+
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi1_i2c {
+	status = "okay";
+	clock-frequency = <200000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+
+	bq27541@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+	};
+
+};
+
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi3_i2c {
+	clock-frequency = <200000>;
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	trackpad@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&tlmm_pinmux>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&gsbi6 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi6_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi6_uart_4pins>;
+	status = "okay";
+};
 
-		dsi-phy@4700200 {
-			status = "okay";
-			vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
+&gsbi7 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi7_serial {
+	status = "okay";
+};
+
+&mdp {
+	status = "okay";
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+&mdp_dsi1_out {
+	remote-endpoint = <&dsi0_in>;
+};
+
+&rpm {
+	regulators {
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vin_lvs2-supply = <&pm8921_s1>;
+
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+		vdd_ncp-supply = <&pm8921_l6>;
+
+		/* Buck SMPS */
+		s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
 		};
 
-		gsbi@16200000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-			i2c@16280000 {
-				status = "okay";
-				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c3_pins>;
-				pinctrl-names = "default";
-
-				trackpad@10 {
-					compatible = "elan,ekth3500";
-					reg = <0x10>;
-					interrupt-parent = <&tlmm_pinmux>;
-					interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-				};
-			};
+		/* msm otg HSUSB_VDDCX */
+		s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
 		};
 
+		/*
+		 * msm_sdcc.1-sdc-vdd_io
+		 * tabla2x-slim-CDC_VDDA_RX
+		 * tabla2x-slim-CDC_VDDA_TX
+		 * tabla2x-slim-CDC_VDD_CP
+		 * tabla2x-slim-VDDIO_CDC
+		 */
+		s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <3200000>;
+			regulator-always-on;
+		};
 
-		gsbi@12440000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
+		s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
 
-			i2c@12460000 {
-				status = "okay";
-				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
+		/* mipi_dsi.1-dsi1_pll_vdda */
+		l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+		};
 
-				eeprom@52 {
-					compatible = "atmel,24c128";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
+		/* msm_otg-HSUSB_3p3 */
+		l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
 
-				bq27541@55 {
-					compatible = "ti,bq27541";
-					reg = <0x55>;
-				};
+		/* msm_otg-HSUSB_1p8 */
+		l4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
 
-			};
+		/* msm_sdcc.1-sdc_vdd */
+		l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			bias-pull-down;
 		};
 
-		gsbi@16500000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
+		l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
 
-			serial@16540000 {
-				status = "okay";
+		/* mipi_dsi.1-dsi1_avdd */
+		l11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+			regulator-always-on;
+		};
 
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi6_uart_4pins>;
-			};
+		/* pwm_power for backlight */
+		l17 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
 		};
 
-		gsbi@16600000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "okay";
-			};
+		/* camera, qdsp6 */
+		l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
 		};
 
-		/* OTG */
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
+		/*
+		 * tabla2x-slim-CDC_VDDA_A_1P2V
+		 * tabla2x-slim-VDDD_CDC_D
+		 */
+		l25 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			bias-pull-down;
 		};
 
-		amba {
-			/* eMMC */
-			sdcc@12400000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
+		lvs1 {
+			bias-pull-down;
 		};
 
-		imem@2a03f000 {
-			compatible = "syscon", "simple-mfd";
-			reg = <0x2a03f000 0x1000>;
+		lvs4 {
+			bias-pull-down;
+		};
 
-			reboot-mode {
-				compatible = "syscon-reboot-mode";
-				offset = <0x65c>;
+		lvs5 {
+			bias-pull-down;
+		};
 
-				mode-normal	= <0x77665501>;
-				mode-bootloader	= <0x77665500>;
-				mode-recovery	= <0x77665502>;
-			};
+		lvs6 {
+			bias-pull-down;
+		};
+		/*
+		 * mipi_dsi.1-dsi1_vddio
+		 * pil_riva-pll_vdd
+		 */
+		lvs7 {
+			bias-pull-down;
 		};
 	};
 };
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+/* OTG */
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 0148148a8e0a..d6ecfd8addb7 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -15,232 +15,216 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	pwrseq {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		sdcc4_pwrseq: sdcc4_pwrseq {
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_default_gpios>;
-			compatible = "mmc-pwrseq-simple";
-			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
-		};
+	sdcc4_pwrseq: pwrseq-sdcc4 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_default_gpios>;
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
 	};
 
-	soc {
-		pinctrl@800000 {
-			card_detect: card_detect {
-				mux {
-					pins = "gpio26";
-					function = "gpio";
-					bias-disable;
-				};
-			};
-
-			pcie_pins: pcie_pinmux {
-				mux {
-					pins = "gpio27";
-					function = "gpio";
-				};
-				conf {
-					pins = "gpio27";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-		};
+	/* on board fixed 3.3v supply */
+	v3p3_fixed: regulator-v3p3 {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIE V3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
 
-		rpm@108000 {
-			regulators {
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs2-supply = <&pm8921_s1>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vdd_l26-supply = <&pm8921_s7>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				s3 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1400000>;
-					qcom,switch-mode-frequency = <4800000>;
-				};
-
-				s4 {
-					regulator-min-microvolt	= <1800000>;
-					regulator-max-microvolt	= <1800000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				l3 {
-					regulator-min-microvolt = <3050000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				l4 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l5 {
-					regulator-min-microvolt = <2750000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l23 {
-					regulator-min-microvolt = <1700000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				pm8921_lvs6: lvs6 {
-					bias-pull-down;
-				};
-
-			};
-		};
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
 
-		gsbi@12440000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
+&gsbi1_i2c {
+	clock-frequency = <200000>;
+	status = "okay";
 
-			i2c@12460000 {
-				status = "okay";
-				clock-frequency = <200000>;
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&gsbi7 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
 
-				eeprom@50 {
-					compatible = "atmel,24c02";
-					reg = <0x50>;
-					pagesize = <32>;
-				};
-			};
+&gsbi7_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi7_uart_2pins>;
+	status = "okay";
+};
+
+&pcie {
+	vdda-supply = <&pm8921_s3>;
+	vdda_phy-supply = <&pm8921_lvs6>;
+	vdda_refclk-supply = <&v3p3_fixed>;
+	pinctrl-0 = <&pcie_pins>;
+	pinctrl-names = "default";
+	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pm8921_gpio {
+	wlan_default_gpios: wlan-gpios-state {
+		pinconf {
+			pins = "gpio43";
+			function = "normal";
+			bias-disable;
+			power-source = <PM8921_GPIO_S4>;
 		};
+	};
+};
+
+&rpm {
+	regulators {
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s1>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
 
-		gsbi@16600000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi7_uart_2pins>;
-			};
+		/* Buck SMPS */
+		s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
 		};
 
-		/* OTG */
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
+		s3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1400000>;
+			qcom,switch-mode-frequency = <4800000>;
 		};
 
-		usb@12520000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
+		s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		usb@12530000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
+		s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		/* on board fixed 3.3v supply */
-		v3p3_fixed: v3p3 {
-			compatible = "regulator-fixed";
-			regulator-name = "PCIE V3P3";
-			regulator-min-microvolt = <3300000>;
+		l3 {
+			regulator-min-microvolt = <3050000>;
 			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
+			bias-pull-down;
+		};
+
+		l4 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		l5 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
 		};
 
-		qcom,ssbi@500000 {
-			pmic@0 {
-				gpio@150 {
-					wlan_default_gpios: wlan-gpios {
-						pios {
-							pins = "gpio43";
-							function = "normal";
-							bias-disable;
-							power-source = <PM8921_GPIO_S4>;
-						};
-					};
-				};
-			};
+		l23 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
 		};
 
-		pci@1b500000 {
-			status = "okay";
-			vdda-supply = <&pm8921_s3>;
-			vdda_phy-supply = <&pm8921_lvs6>;
-			vdda_refclk-supply = <&v3p3_fixed>;
-			pinctrl-0 = <&pcie_pins>;
-			pinctrl-names = "default";
-			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+		lvs6 {
+			bias-pull-down;
 		};
 
-		amba {
-			/* eMMC */
-			sdcc1: sdcc@12400000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
-
-			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
-				status = "okay";
-				vmmc-supply = <&v3p3_fixed>;
-				pinctrl-names	= "default";
-				pinctrl-0	= <&card_detect>;
-				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-			};
-			/* WLAN */
-			sdcc4: sdcc@121c0000 {
-				status = "okay";
-				vmmc-supply = <&v3p3_fixed>;
-				vqmmc-supply = <&v3p3_fixed>;
-				mmc-pwrseq = <&sdcc4_pwrseq>;
-			};
+	};
+};
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+/* External micro SD card */
+&sdcc3 {
+	vmmc-supply = <&v3p3_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&card_detect>;
+	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* WLAN */
+&sdcc4 {
+	status = "okay";
+	vmmc-supply = <&v3p3_fixed>;
+	vqmmc-supply = <&v3p3_fixed>;
+	mmc-pwrseq = <&sdcc4_pwrseq>;
+};
+
+&tlmm_pinmux {
+	card_detect: card_detect {
+		mux {
+			pins = "gpio26";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	pcie_pins: pcie_pinmux {
+		mux {
+			pins = "gpio27";
+			function = "gpio";
+		};
+		conf {
+			pins = "gpio27";
+			drive-strength = <12>;
+			bias-disable;
 		};
 	};
 };
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb_hs3_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+&usb_hs4_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+/* OTG */
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb4 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index d0a17b5a5fa3..96307550523a 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
@@ -21,24 +22,14 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	pwrseq {
-		compatible = "simple-bus";
-
-		sdcc4_pwrseq: sdcc4_pwrseq {
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_default_gpios>;
-			compatible = "mmc-pwrseq-simple";
-			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&notify_led>;
 
-		led@1 {
+		led-user1 {
 			label = "apq8064:green:user1";
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
@@ -55,327 +46,314 @@
 		};
 	};
 
-	soc {
-		pinctrl@800000 {
-			card_detect: card_detect {
-				mux {
-					pins = "gpio26";
-					function = "gpio";
-					bias-disable;
-				};
-			};
+	sdcc4_pwrseq: pwrseq-sdcc4 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_default_gpios>;
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+	};
 
-			pcie_pins: pcie_pinmux {
-				mux {
-					pins = "gpio27";
-					function = "gpio";
-				};
-				conf {
-					pins = "gpio27";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-		};
+	ext_3p3v: regulator-ext-3p3v {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "ext_3p3v";
+		regulator-type = "voltage";
+		startup-delay-us = <0>;
+		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
 
-		rpm@108000 {
-			regulators {
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs2-supply = <&pm8921_s1>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vdd_l26-supply = <&pm8921_s7>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				s3 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1400000>;
-					qcom,switch-mode-frequency = <4800000>;
-				};
-
-				s4 {
-					regulator-min-microvolt	= <1800000>;
-					regulator-max-microvolt	= <1800000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				l3 {
-					regulator-min-microvolt = <3050000>;
-					regulator-max-microvolt = <3300000>;
-					bias-pull-down;
-				};
-
-				l4 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l5 {
-					regulator-min-microvolt = <2750000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l23 {
-					regulator-min-microvolt = <1700000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				lvs1 {
-					bias-pull-down;
-				};
-
-				lvs6 {
-					bias-pull-down;
-				};
-			};
-		};
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
 
-		ext_3p3v: regulator-fixed@1 {
-			compatible = "regulator-fixed";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-name = "ext_3p3v";
-			regulator-type = "voltage";
-			startup-delay-us = <0>;
-			gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-		};
+&gsbi1_i2c {
+	clock-frequency = <200000>;
+	status = "okay";
 
-		gsbi3: gsbi@16200000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-			i2c@16280000 {
-				status = "okay";
-			};
-		};
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
 
-		gsbi@16300000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
-			/* CAM I2C MIPI-CSI connector */
-			i2c@16380000 {
-				status = "okay";
-			};
-		};
+&gsbi3 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi3_i2c {
+	status = "okay";
+};
 
-		gsbi@12440000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C>;
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
 
-			i2c@12460000 {
-				status = "okay";
-				clock-frequency = <200000>;
+/* CAM I2C MIPI-CSI connector */
+&gsbi4_i2c {
+	status = "okay";
+};
 
-				eeprom@52 {
-					compatible = "atmel,24c128";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
-			};
-		};
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	status = "okay";
+};
 
-		gsbi@1a200000 {
-			qcom,mode = <GSBI_PROT_SPI>;
-			status = "okay";
-			spi4: spi@1a280000 {
-				status = "okay";
-				num-cs = <1>;
-				cs-gpios = <&tlmm_pinmux 53 0>;
-			};
-		};
+&gsbi5_spi {
+	num-cs = <1>;
+	cs-gpios = <&tlmm_pinmux 53 0>;
+	status = "okay";
+};
 
-		gsbi@16500000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_UART_W_FC>;
+&gsbi6 {
+	qcom,mode = <GSBI_PROT_UART_W_FC>;
+	status = "okay";
+};
 
-			serial@16540000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi6_uart_4pins>;
-			};
+&gsbi6_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi6_uart_4pins>;
+	status = "okay";
+};
+
+&gsbi7 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi7_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi7_uart_2pins>;
+	status = "okay";
+};
+
+&hdmi {
+	core-vdda-supply = <&pm8921_hdmi_switch>;
+	hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&hdmi_in {
+	remote-endpoint = <&mdp_dtv_out>;
+};
+
+&hdmi_out {
+	remote-endpoint = <&hdmi_con>;
+};
+
+&hdmi_phy {
+	status = "okay";
+	core-vdda-supply = <&pm8921_hdmi_switch>;
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdp_dtv_out {
+	remote-endpoint = <&hdmi_in>;
+};
+
+&pcie {
+	status = "okay";
+	vdda-supply = <&pm8921_s3>;
+	vdda_phy-supply = <&pm8921_lvs6>;
+	vdda_refclk-supply = <&ext_3p3v>;
+	pinctrl-0 = <&pcie_pins>;
+	pinctrl-names = "default";
+	perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+};
+
+&pm8921_gpio {
+	wlan_default_gpios: wlan-gpios-state {
+		pinconf {
+			pins = "gpio43";
+			function = "normal";
+			bias-disable;
+			power-source = <PM8921_GPIO_S4>;
 		};
+	};
 
-		gsbi@16600000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16640000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi7_uart_2pins>;
-			};
+	notify_led: nled-state {
+		pinconf {
+			pins = "gpio18";
+			function = "normal";
+			bias-disable;
+			power-source = <PM8921_GPIO_S4>;
 		};
+	};
+};
 
-		sata_phy0: phy@1b400000 {
-			status = "okay";
+&rpm {
+	regulators {
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s1>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+
+		/* Buck SMPS */
+		s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
 		};
 
-		sata0: sata@29000000 {
-			status		= "okay";
-			target-supply	= <&pm8921_s4>;
+		s3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1400000>;
+			qcom,switch-mode-frequency = <4800000>;
 		};
 
-		/* OTG */
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
+		s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		usb@12520000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
+		s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
 		};
 
-		usb@12530000 {
-			status = "okay";
-			dr_mode = "host";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l23>;
-				};
-			};
+		l3 {
+			regulator-min-microvolt = <3050000>;
+			regulator-max-microvolt = <3300000>;
+			bias-pull-down;
 		};
 
-		pci@1b500000 {
-			status = "okay";
-			vdda-supply = <&pm8921_s3>;
-			vdda_phy-supply = <&pm8921_lvs6>;
-			vdda_refclk-supply = <&ext_3p3v>;
-			pinctrl-0 = <&pcie_pins>;
-			pinctrl-names = "default";
-			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+		l4 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
 		};
 
-		qcom,ssbi@500000 {
-			pmic@0 {
-				gpio@150 {
-					wlan_default_gpios: wlan-gpios {
-						pios {
-							pins = "gpio43";
-							function = "normal";
-							bias-disable;
-							power-source = <PM8921_GPIO_S4>;
-						};
-					};
-
-					notify_led: nled {
-						pios {
-							pins = "gpio18";
-							function = "normal";
-							bias-disable;
-							power-source = <PM8921_GPIO_S4>;
-						};
-					};
-				};
-			};
+		l5 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
 		};
 
-		amba {
-			/* eMMC */
-			sdcc1: sdcc@12400000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
+		l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
 
-			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
-				status = "okay";
-				vmmc-supply = <&pm8921_l6>;
-				pinctrl-names	= "default";
-				pinctrl-0	= <&card_detect>;
-				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-			};
-			/* WLAN */
-			sdcc4: sdcc@121c0000 {
-				status = "okay";
-				vmmc-supply = <&ext_3p3v>;
-				vqmmc-supply = <&pm8921_lvs1>;
-				mmc-pwrseq = <&sdcc4_pwrseq>;
-			};
+		l23 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		lvs1 {
+			bias-pull-down;
 		};
 
-		hdmi-tx@4a00000 {
-			status = "okay";
+		lvs6 {
+			bias-pull-down;
+		};
+	};
+};
 
-			core-vdda-supply = <&pm8921_hdmi_switch>;
-			hdmi-mux-supply = <&ext_3p3v>;
+&sata_phy0 {
+	status = "okay";
+};
 
-			hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
+&sata0 {
+	target-supply = <&pm8921_s4>;
+	status = "okay";
+};
 
-			ports {
-				port@0 {
-					endpoint {
-						remote-endpoint = <&mdp_dtv_out>;
-					};
-				};
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
 
-				port@1 {
-					endpoint {
-						remote-endpoint = <&hdmi_con>;
-					};
-				};
-			};
-		};
+/* External micro SD card */
+&sdcc3 {
+	vmmc-supply = <&pm8921_l6>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&card_detect>;
+	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
 
-		hdmi-phy@4a00400 {
-			status = "okay";
+/* WLAN */
+&sdcc4 {
+	vmmc-supply = <&ext_3p3v>;
+	vqmmc-supply = <&pm8921_lvs1>;
+	mmc-pwrseq = <&sdcc4_pwrseq>;
+	status = "okay";
+};
 
-			core-vdda-supply = <&pm8921_hdmi_switch>;
+&tlmm_pinmux {
+	card_detect: card_detect {
+		mux {
+			pins = "gpio26";
+			function = "gpio";
+			bias-disable;
 		};
+	};
 
-		mdp@5100000 {
-			status = "okay";
-
-			ports {
-				port@3 {
-					endpoint {
-						remote-endpoint = <&hdmi_in>;
-					};
-				};
-			};
+	pcie_pins: pcie_pinmux {
+		mux {
+			pins = "gpio27";
+			function = "gpio";
+		};
+		conf {
+			pins = "gpio27";
+			drive-strength = <12>;
+			bias-disable;
 		};
 	};
 };
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb_hs3_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+&usb_hs4_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l23>;
+};
+
+/* OTG */
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb4 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
index cbe42c4153a0..b4d286a6fab1 100644
--- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
@@ -76,7 +76,7 @@
 		pinconf {
 			pins = "gpio20", "gpio21";
 			drive-strength = <2>;
-			bias-disable = <0>;
+			bias-disable;
 		};
 	};
 
@@ -116,7 +116,7 @@
 		pinconf {
 			pins = "gpio24", "gpio25";
 			drive-strength = <2>;
-			bias-disable = <0>;
+			bias-disable;
 		};
 	};
 
@@ -141,7 +141,7 @@
 		pinconf {
 			pins = "gpio8", "gpio9";
 			drive-strength = <2>;
-			bias-disable = <0>;
+			bias-disable;
 		};
 	};
 
@@ -166,7 +166,7 @@
 		pinconf {
 			pins = "gpio12", "gpio13";
 			drive-strength = <2>;
-			bias-disable = <0>;
+			bias-disable;
 		};
 	};
 
@@ -229,7 +229,7 @@
 		pinconf {
 			pins = "gpio16", "gpio17";
 			drive-strength = <2>;
-			bias-disable = <0>;
+			bias-disable;
 		};
 	};
 
@@ -282,7 +282,7 @@
 		pinconf {
 			pins = "gpio84", "gpio85";
 			drive-strength = <2>;
-			bias-disable = <0>;
+			bias-disable;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
new file mode 100644
index 000000000000..9244512b74d1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Sony Xperia Z";
+	compatible = "sony,xperia-yuga", "qcom,apq8064";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &gsbi5_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi5_serial {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gsbi5_uart_pin_a>;
+	status = "okay";
+};
+
+&pm8921_gpio {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio3", "gpio4", "gpio29", "gpio35";
+		function = "normal";
+
+		bias-pull-up;
+		drive-push-pull;
+		input-enable;
+		power-source = <2>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+		qcom,pull-up-strength = <0>;
+	};
+};
+
+&riva {
+	pinctrl-names = "default";
+	pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+	status = "okay";
+};
+
+&rpm {
+	regulators {
+		vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vin_lvs_1_3_6-supply = <&pm8921_s4>;
+		vin_lvs_4_5_7-supply = <&pm8921_s4>;
+		vin_ncp-supply = <&pm8921_l6>;
+		vin_lvs2-supply = <&pm8921_s4>;
+		vin_l24-supply = <&pm8921_s1>;
+		vin_l25-supply = <&pm8921_s1>;
+		vin_l27-supply = <&pm8921_s7>;
+		vin_l28-supply = <&pm8921_s7>;
+
+		/* Buck SMPS */
+		s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		s4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		s7 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <3200000>;
+		};
+
+		s8 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+
+		/* PMOS LDO */
+		l1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			bias-pull-down;
+		};
+
+		l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
+
+		l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		l7 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			bias-pull-down;
+		};
+
+		l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		l10 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			bias-pull-down;
+		};
+
+		l11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		l12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		l16 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			bias-pull-down;
+		};
+
+		l17 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <2000000>;
+			bias-pull-down;
+		};
+
+		l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		l21 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		l22 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+			bias-pull-down;
+		};
+
+		l23 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		l25 {
+			regulator-always-on;
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			bias-pull-down;
+		};
+
+		l27 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		l28 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		l29 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <2000000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		lvs1 {
+			bias-pull-down;
+		};
+
+		lvs2 {
+			bias-pull-down;
+		};
+
+		lvs3 {
+			bias-pull-down;
+		};
+
+		lvs4 {
+			bias-pull-down;
+		};
+
+		lvs5 {
+			bias-pull-down;
+		};
+
+		lvs6 {
+			bias-pull-down;
+		};
+
+		lvs7 {
+			bias-pull-down;
+		};
+
+		usb-switch {};
+
+		hdmi-switch {};
+
+		ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	vqmmc-supply = <&pm8921_s4>;
+	status = "okay";
+};
+
+&sdcc3 {
+	vmmc-supply = <&pm8921_l6>;
+	cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
+
+	status = "okay";
+};
+
+&tlmm_pinmux {
+	gsbi5_uart_pin_a: gsbi5-uart-pin-active {
+		rx {
+			pins = "gpio52";
+			function = "gsbi5";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		tx {
+			pins = "gpio51";
+			function = "gsbi5";
+			drive-strength = <4>;
+			bias-disable;
+		};
+	};
+
+
+	sdcc3_cd_pin_a: sdcc3-cd-pin-active {
+		pins = "gpio26";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
deleted file mode 100644
index 72e47bdc5c12..000000000000
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
+++ /dev/null
@@ -1,402 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-apq8064-v2.0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Sony Xperia Z";
-	compatible = "sony,xperia-yuga", "qcom,apq8064";
-
-	aliases {
-		serial0 = &gsbi5_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		input-name = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
-		camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		volume-down {
-			label = "volume_down";
-			gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		volume-up {
-			label = "volume_up";
-			gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	soc {
-		pinctrl@800000 {
-			gsbi5_uart_pin_a: gsbi5-uart-pin-active {
-				rx {
-					pins = "gpio52";
-					function = "gsbi5";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-
-				tx {
-					pins = "gpio51";
-					function = "gsbi5";
-					drive-strength = <4>;
-					bias-disable;
-				};
-			};
-
-
-			sdcc3_cd_pin_a: sdcc3-cd-pin-active {
-				pins = "gpio26";
-				function = "gpio";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-
-		rpm@108000 {
-			regulators {
-				vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vin_lvs_1_3_6-supply = <&pm8921_s4>;
-				vin_lvs_4_5_7-supply = <&pm8921_s4>;
-				vin_ncp-supply = <&pm8921_l6>;
-				vin_lvs2-supply = <&pm8921_s4>;
-				vin_l24-supply = <&pm8921_s1>;
-				vin_l25-supply = <&pm8921_s1>;
-				vin_l27-supply = <&pm8921_s7>;
-				vin_l28-supply = <&pm8921_s7>;
-
-				/* Buck SMPS */
-				s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				s2 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				s3 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <4800000>;
-					bias-pull-down;
-				};
-
-				s4 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <3200000>;
-				};
-
-				s8 {
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-
-				/* PMOS LDO */
-				l1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					bias-pull-down;
-				};
-
-				l2 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				l3 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3075000>;
-					bias-pull-down;
-				};
-
-				l4 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l5 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l7 {
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l8 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					bias-pull-down;
-				};
-
-				l9 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l10 {
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <2900000>;
-					bias-pull-down;
-				};
-
-				l11 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				l12 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				l14 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				l16 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					bias-pull-down;
-				};
-
-				l17 {
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					bias-pull-down;
-				};
-
-				l18 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				l21 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				l22 {
-					regulator-min-microvolt = <2600000>;
-					regulator-max-microvolt = <2600000>;
-					bias-pull-down;
-				};
-
-				l23 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				l24 {
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-
-				l25 {
-					regulator-always-on;
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-					bias-pull-down;
-				};
-
-				l27 {
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-				};
-
-				l28 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				l29 {
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					bias-pull-down;
-				};
-
-				/* Low Voltage Switch */
-				lvs1 {
-					bias-pull-down;
-				};
-
-				lvs2 {
-					bias-pull-down;
-				};
-
-				lvs3 {
-					bias-pull-down;
-				};
-
-				lvs4 {
-					bias-pull-down;
-				};
-
-				lvs5 {
-					bias-pull-down;
-				};
-
-				lvs6 {
-					bias-pull-down;
-				};
-
-				lvs7 {
-					bias-pull-down;
-				};
-
-				usb-switch {};
-
-				hdmi-switch {};
-
-				ncp {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-			};
-		};
-
-		qcom,ssbi@500000 {
-			pmic@0 {
-				gpio@150 {
-					gpio_keys_pin_a: gpio-keys-pin-active {
-						pins = "gpio3", "gpio4", "gpio29", "gpio35";
-						function = "normal";
-
-						bias-pull-up;
-						drive-push-pull;
-						input-enable;
-						power-source = <2>;
-						qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-						qcom,pull-up-strength = <0>;
-					};
-				};
-			};
-		};
-
-		usb@12500000 {
-			status = "okay";
-			dr_mode = "otg";
-			ulpi {
-				phy {
-					v3p3-supply = <&pm8921_l3>;
-					v1p8-supply = <&pm8921_l4>;
-				};
-			};
-		};
-
-		gsbi@1a200000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-
-			serial@1a240000 {
-				status = "okay";
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&gsbi5_uart_pin_a>;
-			};
-		};
-
-		amba {
-			sdcc1: sdcc@12400000 {
-				status = "okay";
-
-				vmmc-supply = <&pm8921_l5>;
-				vqmmc-supply = <&pm8921_s4>;
-			};
-
-			sdcc3: sdcc@12180000 {
-				status = "okay";
-
-				vmmc-supply = <&pm8921_l6>;
-				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
-			};
-		};
-
-		riva-pil@3204000 {
-			status = "okay";
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 2687c4e890ba..672b246afbba 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -2,6 +2,7 @@
 /dts-v1/;
 
 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/clock/qcom,lcc-msm8960.h>
 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
@@ -95,17 +96,17 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x0>;
 	};
 
 	thermal-zones {
-		cpu-thermal0 {
+		cpu0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&gcc 7>;
+			thermal-sensors = <&tsens 7>;
 			coefficients = <1199 0>;
 
 			trips {
@@ -122,11 +123,11 @@
 			};
 		};
 
-		cpu-thermal1 {
+		cpu1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&gcc 8>;
+			thermal-sensors = <&tsens 8>;
 			coefficients = <1132 0>;
 
 			trips {
@@ -143,11 +144,11 @@
 			};
 		};
 
-		cpu-thermal2 {
+		cpu2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&gcc 9>;
+			thermal-sensors = <&tsens 9>;
 			coefficients = <1199 0>;
 
 			trips {
@@ -164,11 +165,11 @@
 			};
 		};
 
-		cpu-thermal3 {
+		cpu3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
-			thermal-sensors = <&gcc 10>;
+			thermal-sensors = <&tsens 10>;
 			coefficients = <1132 0>;
 
 			trips {
@@ -198,7 +199,7 @@
 			clock-frequency = <19200000>;
 		};
 
-		pxo_board {
+		pxo_board: pxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <27000000>;
@@ -227,7 +228,7 @@
 	smd {
 		compatible = "qcom,smd";
 
-		modem@0 {
+		modem-edge {
 			interrupts = <0 37 IRQ_TYPE_EDGE_RISING>;
 
 			qcom,ipc = <&l2cc 8 3>;
@@ -236,7 +237,7 @@
 			status = "disabled";
 		};
 
-		q6@1 {
+		q6-edge {
 			interrupts = <0 90 IRQ_TYPE_EDGE_RISING>;
 
 			qcom,ipc = <&l2cc 8 15>;
@@ -245,7 +246,7 @@
 			status = "disabled";
 		};
 
-		dsps@3 {
+		dsps-edge {
 			interrupts = <0 138 IRQ_TYPE_EDGE_RISING>;
 
 			qcom,ipc = <&sps_sic_non_secure 0x4080 0>;
@@ -254,7 +255,7 @@
 			status = "disabled";
 		};
 
-		riva@6 {
+		riva-edge {
 			interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
 
 			qcom,ipc = <&l2cc 8 25>;
@@ -315,7 +316,7 @@
 
 	firmware {
 		scm {
-			compatible = "qcom,scm-apq8064";
+			compatible = "qcom,scm-apq8064", "qcom,scm";
 
 			clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
 			clock-names = "core";
@@ -374,35 +375,50 @@
 		};
 
 		timer@200a000 {
-			compatible = "qcom,kpss-timer",
-				     "qcom,kpss-wdt-apq8064", "qcom,msm-timer";
+			compatible = "qcom,kpss-wdt-apq8064", "qcom,kpss-timer",
+				     "qcom,msm-timer";
 			interrupts = <1 1 0x301>,
 				     <1 2 0x301>,
 				     <1 3 0x301>;
 			reg = <0x0200a000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
+			clock-frequency = <27000000>;
 			cpu-offset = <0x80000>;
 		};
 
 		acc0: clock-controller@2088000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu0_aux";
+			#clock-cells = <0>;
 		};
 
 		acc1: clock-controller@2098000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu1_aux";
+			#clock-cells = <0>;
 		};
 
 		acc2: clock-controller@20a8000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu2_aux";
+			#clock-cells = <0>;
 		};
 
 		acc3: clock-controller@20b8000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu3_aux";
+			#clock-cells = <0>;
 		};
 
 		saw0: power-controller@2089000 {
@@ -430,8 +446,8 @@
 		};
 
 		sps_sic_non_secure: sps-sic-non-secure@12100000 {
-			compatible	= "syscon";
-			reg		= <0x12100000 0x10000>;
+			compatible = "syscon";
+			reg = <0x12100000 0x10000>;
 		};
 
 		gsbi1: gsbi@12440000 {
@@ -671,7 +687,7 @@
 			reg = <0x00c00000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pm8821: pmic@1 {
+			pm8821: pmic {
 				compatible = "qcom,pm8821";
 				interrupt-parent = <&tlmm_pinmux>;
 				interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
@@ -683,22 +699,21 @@
 				pm8821_mpps: mpps@50 {
 					compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
 					reg = <0x50>;
-					interrupts = <24 IRQ_TYPE_NONE>,
-						     <25 IRQ_TYPE_NONE>,
-						     <26 IRQ_TYPE_NONE>,
-						     <27 IRQ_TYPE_NONE>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
 					gpio-controller;
 					#gpio-cells = <2>;
+					gpio-ranges = <&pm8821_mpps 0 0 4>;
 				};
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pmicintc: pmic@0 {
+			pmicintc: pmic {
 				compatible = "qcom,pm8921";
 				interrupt-parent = <&tlmm_pinmux>;
 				interrupts = <74 8>;
@@ -726,19 +741,9 @@
 					reg = <0x50>;
 					gpio-controller;
 					#gpio-cells = <2>;
-					interrupts =
-					<128 IRQ_TYPE_NONE>,
-					<129 IRQ_TYPE_NONE>,
-					<130 IRQ_TYPE_NONE>,
-					<131 IRQ_TYPE_NONE>,
-					<132 IRQ_TYPE_NONE>,
-					<133 IRQ_TYPE_NONE>,
-					<134 IRQ_TYPE_NONE>,
-					<135 IRQ_TYPE_NONE>,
-					<136 IRQ_TYPE_NONE>,
-					<137 IRQ_TYPE_NONE>,
-					<138 IRQ_TYPE_NONE>,
-					<139 IRQ_TYPE_NONE>;
+					gpio-ranges = <&pm8921_mpps 0 0 12>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
 				};
 
 				rtc@11d {
@@ -766,40 +771,40 @@
 					#size-cells = <0>;
 					#io-channel-cells = <2>;
 
-					vcoin: adc-channel@00 {
+					vcoin: adc-channel@0 {
 						reg = <0x00 0x00>;
 					};
-					vbat: adc-channel@01 {
+					vbat: adc-channel@1 {
 						reg = <0x00 0x01>;
 					};
-					dcin: adc-channel@02 {
+					dcin: adc-channel@2 {
 						reg = <0x00 0x02>;
 					};
-					vph_pwr: adc-channel@04 {
+					vph_pwr: adc-channel@4 {
 						reg = <0x00 0x04>;
 					};
-					batt_therm: adc-channel@08 {
+					batt_therm: adc-channel@8 {
 						reg = <0x00 0x08>;
 					};
-					batt_id: adc-channel@09 {
+					batt_id: adc-channel@9 {
 						reg = <0x00 0x09>;
 					};
-					usb_vbus: adc-channel@0a {
+					usb_vbus: adc-channel@a {
 						reg = <0x00 0x0a>;
 					};
-					die_temp: adc-channel@0b {
+					die_temp: adc-channel@b {
 						reg = <0x00 0x0b>;
 					};
-					ref_625mv: adc-channel@0c {
+					ref_625mv: adc-channel@c {
 						reg = <0x00 0x0c>;
 					};
-					ref_1250mv: adc-channel@0d {
+					ref_1250mv: adc-channel@d {
 						reg = <0x00 0x0d>;
 					};
-					chg_temp: adc-channel@0e {
+					chg_temp: adc-channel@e {
 						reg = <0x00 0x0e>;
 					};
-					ref_muxoff: adc-channel@0f {
+					ref_muxoff: adc-channel@f {
 						reg = <0x00 0x0f>;
 					};
 				};
@@ -807,27 +812,41 @@
 		};
 
 		qfprom: qfprom@700000 {
-			compatible	= "qcom,qfprom";
-			reg		= <0x00700000 0x1000>;
-			#address-cells	= <1>;
-			#size-cells	= <1>;
+			compatible = "qcom,apq8064-qfprom", "qcom,qfprom";
+			reg = <0x00700000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			ranges;
-			tsens_calib: calib {
+			tsens_calib: calib@404 {
 				reg = <0x404 0x10>;
 			};
-			tsens_backup: backup_calib {
+			tsens_backup: backup_calib@414 {
 				reg = <0x414 0x10>;
 			};
 		};
 
 		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-apq8064";
+			compatible = "qcom,gcc-apq8064", "syscon";
 			reg = <0x00900000 0x4000>;
-			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-			nvmem-cell-names = "calib", "calib_backup";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
-			#thermal-sensor-cells = <1>;
+			clocks = <&cxo_board>,
+				 <&pxo_board>,
+				 <&lcc PLL4>;
+			clock-names = "cxo", "pxo", "pll4";
+
+			tsens: thermal-sensor {
+				compatible = "qcom,msm8960-tsens";
+
+				nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+				nvmem-cell-names = "calib", "calib_backup";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uplow";
+
+				#qcom,sensors = <11>;
+				#thermal-sensor-cells = <1>;
+			};
 		};
 
 		lcc: clock-controller@28000000 {
@@ -835,33 +854,69 @@
 			reg = <0x28000000 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL4_VOTE>,
+				 <0>,
+				 <0>, <0>,
+				 <0>, <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll4_vote",
+				      "mi2s_codec_clk",
+				      "codec_i2s_mic_codec_clk",
+				      "spare_i2s_mic_codec_clk",
+				      "codec_i2s_spkr_codec_clk",
+				      "spare_i2s_spkr_codec_clk",
+				      "pcm_codec_clk";
 		};
 
 		mmcc: clock-controller@4000000 {
 			compatible = "qcom,mmcc-apq8064";
 			reg = <0x4000000 0x1000>;
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL3>,
+				 <&gcc PLL8_VOTE>,
+				 <&dsi0_phy 1>,
+				 <&dsi0_phy 0>,
+				 <&dsi1_phy 1>,
+				 <&dsi1_phy 0>,
+				 <&hdmi_phy>;
+			clock-names = "pxo",
+				      "pll3",
+				      "pll8_vote",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "dsi2pll",
+				      "dsi2pllbyte",
+				      "hdmipll";
 		};
 
 		l2cc: clock-controller@2011000 {
-			compatible	= "syscon";
-			reg		= <0x2011000 0x1000>;
+			compatible = "qcom,kpss-gcc-apq8064", "qcom,kpss-gcc", "syscon";
+			reg = <0x2011000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			#clock-cells = <0>;
 		};
 
-		rpm@108000 {
-			compatible	= "qcom,rpm-apq8064";
-			reg		= <0x108000 0x1000>;
-			qcom,ipc	= <&l2cc 0x8 2>;
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-apq8064";
+			reg = <0x108000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
 
-			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
-					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names	= "ack", "err", "wakeup";
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack", "err", "wakeup";
 
 			rpmcc: clock-controller {
-				compatible	= "qcom,rpmcc-apq8064", "qcom,rpmcc";
+				compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc";
 				#clock-cells = <1>;
+				clocks = <&pxo_board>, <&cxo_board>;
+				clock-names = "pxo", "cxo";
 			};
 
 			regulators {
@@ -1013,53 +1068,59 @@
 		};
 
 		sata_phy0: phy@1b400000 {
-			compatible	= "qcom,apq8064-sata-phy";
-			status		= "disabled";
-			reg		= <0x1b400000 0x200>;
-			reg-names	= "phy_mem";
-			clocks		= <&gcc SATA_PHY_CFG_CLK>;
-			clock-names	= "cfg";
-			#phy-cells	= <0>;
+			compatible = "qcom,apq8064-sata-phy";
+			status = "disabled";
+			reg = <0x1b400000 0x200>;
+			reg-names = "phy_mem";
+			clocks = <&gcc SATA_PHY_CFG_CLK>;
+			clock-names = "cfg";
+			#phy-cells = <0>;
 		};
 
 		sata0: sata@29000000 {
-			compatible		= "qcom,apq8064-ahci", "generic-ahci";
-			status			= "disabled";
-			reg			= <0x29000000 0x180>;
-			interrupts		= <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks			= <&gcc SFAB_SATA_S_H_CLK>,
-						<&gcc SATA_H_CLK>,
-						<&gcc SATA_A_CLK>,
-						<&gcc SATA_RXOOB_CLK>,
-						<&gcc SATA_PMALIVE_CLK>;
-			clock-names		= "slave_iface",
-						"iface",
-						"bus",
-						"rxoob",
-						"core_pmalive";
-
-			assigned-clocks		= <&gcc SATA_RXOOB_CLK>,
-						<&gcc SATA_PMALIVE_CLK>;
-			assigned-clock-rates	= <100000000>, <100000000>;
-
-			phys			= <&sata_phy0>;
-			phy-names		= "sata-phy";
-			ports-implemented	= <0x1>;
-		};
-
-		/* Temporary fixed regulator */
-		sdcc1bam:dma@12402000{
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12402000 0x8000>;
-			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		sdcc3bam:dma@12182000{
+			compatible = "qcom,apq8064-ahci", "generic-ahci";
+			status	 = "disabled";
+			reg	 = <0x29000000 0x180>;
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc SFAB_SATA_S_H_CLK>,
+				 <&gcc SATA_H_CLK>,
+				 <&gcc SATA_A_CLK>,
+				 <&gcc SATA_RXOOB_CLK>,
+				 <&gcc SATA_PMALIVE_CLK>;
+			clock-names = "slave_iface",
+				      "iface",
+				      "bus",
+				      "rxoob",
+				      "core_pmalive";
+
+			assigned-clocks = <&gcc SATA_RXOOB_CLK>,
+					  <&gcc SATA_PMALIVE_CLK>;
+			assigned-clock-rates = <100000000>, <100000000>;
+
+			phys = <&sata_phy0>;
+			phy-names = "sata-phy";
+			ports-implemented = <0x1>;
+		};
+
+		sdcc3: mmc@12180000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12180000 0x2000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <192000000>;
+			no-1-8-v;
+			dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+			dma-names = "tx", "rx";
+		};
+
+		sdcc3bam: dma-controller@12182000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12182000 0x8000>;
 			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -1069,7 +1130,25 @@
 			qcom,ee = <0>;
 		};
 
-		sdcc4bam:dma@121c2000{
+		sdcc4: mmc@121c0000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x121c0000 0x2000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <48000000>;
+			dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdc4_gpios>;
+		};
+
+		sdcc4bam: dma-controller@121c2000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x121c2000 0x8000>;
 			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -1079,67 +1158,33 @@
 			qcom,ee = <0>;
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: sdcc@12400000 {
-				status		= "disabled";
-				compatible	= "arm,pl18x", "arm,primecell";
-				pinctrl-names	= "default";
-				pinctrl-0	= <&sdcc1_pins>;
-				arm,primecell-periphid = <0x00051180>;
-				reg		= <0x12400000 0x2000>;
-				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <8>;
-				max-frequency	= <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-			};
-
-			sdcc3: sdcc@12180000 {
-				compatible	= "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status		= "disabled";
-				reg		= <0x12180000 0x2000>;
-				interrupts	= <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency	= <192000000>;
-				no-1-8-v;
-				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-				dma-names = "tx", "rx";
-			};
-
-			sdcc4: sdcc@121c0000 {
-				compatible	= "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status		= "disabled";
-				reg		= <0x121c0000 0x2000>;
-				interrupts	= <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency	= <48000000>;
-				dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
-				dma-names = "tx", "rx";
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdc4_gpios>;
-			};
+		sdcc1: mmc@12400000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdcc1_pins>;
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12400000 0x2000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <96000000>;
+			non-removable;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+			dma-names = "tx", "rx";
+		};
+
+		sdcc1bam: dma-controller@12402000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x8000>;
+			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
 		};
 
 		tcsr: syscon@1a400000 {
@@ -1148,22 +1193,21 @@
 		};
 
 		gpu: adreno-3xx@4300000 {
-			compatible = "qcom,adreno-3xx";
+			compatible = "qcom,adreno-320.2", "qcom,adreno";
 			reg = <0x04300000 0x20000>;
 			reg-names = "kgsl_3d0_reg_memory";
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "kgsl_3d0_irq";
 			clock-names =
-			    "core_clk",
-			    "iface_clk",
-			    "mem_clk",
-			    "mem_iface_clk";
+			    "core",
+			    "iface",
+			    "mem",
+			    "mem_iface";
 			clocks =
 			    <&mmcc GFX3D_CLK>,
 			    <&mmcc GFX3D_AHB_CLK>,
 			    <&mmcc GFX3D_AXI_CLK>,
 			    <&mmcc MMSS_IMEM_AHB_CLK>;
-			qcom,chipid = <0x03020002>;
 
 			iommus = <&gfx3d 0
 				  &gfx3d 1
@@ -1230,13 +1274,17 @@
 				  &gfx3d1 30
 				  &gfx3d1 31>;
 
-			qcom,gpu-pwrlevels {
-				compatible = "qcom,gpu-pwrlevels";
-				qcom,gpu-pwrlevel@0 {
-					qcom,gpu-freq = <450000000>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
 				};
-				qcom,gpu-pwrlevel@1 {
-					qcom,gpu-freq = <27000000>;
+
+				opp-27000000 {
+					opp-hz = /bits/ 64 <27000000>;
 				};
 			};
 		};
@@ -1246,8 +1294,9 @@
 			reg = <0x5700000 0x70>;
 		};
 
-		dsi0: mdss_dsi@4700000 {
-			compatible = "qcom,mdss-dsi-ctrl";
+		dsi0: dsi@4700000 {
+			compatible = "qcom,apq8064-dsi-ctrl",
+				     "qcom,mdss-dsi-ctrl";
 			label = "MDSS DSI CTRL->0";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1262,9 +1311,9 @@
 				<&mmcc DSI1_BYTE_CLK>,
 				<&mmcc DSI_PIXEL_CLK>,
 				<&mmcc DSI1_ESC_CLK>;
-			clock-names = "iface_clk", "bus_clk", "core_mmss_clk",
-					"src_clk", "byte_clk", "pixel_clk",
-					"core_clk";
+			clock-names = "iface", "bus", "core_mmss",
+					"src", "byte", "pixel",
+					"core";
 
 			assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
 					<&mmcc DSI1_ESC_SRC>,
@@ -1276,6 +1325,8 @@
 						<&dsi0_phy 1>;
 			syscon-sfpb = <&mmss_sfpb>;
 			phys = <&dsi0_phy>;
+			status = "disabled";
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1295,7 +1346,7 @@
 		};
 
 
-		dsi0_phy: dsi-phy@4700200 {
+		dsi0_phy: phy@4700200 {
 			compatible = "qcom,dsi-phy-28nm-8960";
 			#clock-cells = <1>;
 			#phy-cells = <0>;
@@ -1304,12 +1355,87 @@
 				<0x04700300 0x200>,
 				<0x04700500 0x5c>;
 			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
-			clock-names = "iface_clk", "ref";
+			clock-names = "iface", "ref";
 			clocks = <&mmcc DSI_M_AHB_CLK>,
-				 <&cxo_board>;
+				 <&pxo_board>;
+			status = "disabled";
+		};
+
+		dsi1: dsi@5800000 {
+			compatible = "qcom,mdss-dsi-ctrl";
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x05800000 0x200>;
+			reg-names = "dsi_ctrl";
+
+			clocks = <&mmcc DSI2_M_AHB_CLK>,
+				 <&mmcc DSI2_S_AHB_CLK>,
+				 <&mmcc AMP_AHB_CLK>,
+				 <&mmcc DSI2_CLK>,
+				 <&mmcc DSI2_BYTE_CLK>,
+				 <&mmcc DSI2_PIXEL_CLK>,
+				 <&mmcc DSI2_ESC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core_mmss",
+				      "src",
+				      "byte",
+				      "pixel",
+				      "core";
+
+			assigned-clocks = <&mmcc DSI2_BYTE_SRC>,
+					  <&mmcc DSI2_ESC_SRC>,
+					  <&mmcc DSI2_SRC>,
+					  <&mmcc DSI2_PIXEL_SRC>;
+			assigned-clock-parents = <&dsi1_phy 0>,
+						 <&dsi1_phy 0>,
+						 <&dsi1_phy 1>,
+						 <&dsi1_phy 1>;
+
+			syscon-sfpb = <&mmss_sfpb>;
+			phys = <&dsi1_phy>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi1_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi1_out: endpoint {
+					};
+				};
+			};
 		};
 
 
+		dsi1_phy: dsi-phy@5800200 {
+			compatible = "qcom,dsi-phy-28nm-8960";
+			reg = <0x05800200 0x100>,
+			      <0x05800300 0x200>,
+			      <0x05800500 0x5c>;
+			reg-names = "dsi_pll",
+				    "dsi_phy",
+				    "dsi_phy_regulator";
+			clock-names = "iface",
+				      "ref";
+			clocks = <&mmcc DSI2_M_AHB_CLK>,
+				 <&pxo_board>;
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		mdp_port0: iommu@7500000 {
 			compatible = "qcom,apq8064-iommu";
 			#iommu-cells = <1>;
@@ -1375,11 +1501,11 @@
 		};
 
 		pcie: pci@1b500000 {
-			compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
-			reg = <0x1b500000 0x1000
-			       0x1b502000 0x80
-			       0x1b600000 0x100
-			       0x0ff00000 0x100000>;
+			compatible = "qcom,pcie-apq8064";
+			reg = <0x1b500000 0x1000>,
+			      <0x1b502000 0x80>,
+			      <0x1b600000 0x100>,
+			      <0x0ff00000 0x100000>;
 			reg-names = "dbi", "elbi", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <0>;
@@ -1387,8 +1513,8 @@
 			num-lanes = <1>;
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* memory */
+			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00100000>, /* I/O */
+				 <0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* mem */
 			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
@@ -1420,12 +1546,13 @@
 			clocks = <&mmcc HDMI_APP_CLK>,
 				 <&mmcc HDMI_M_AHB_CLK>,
 				 <&mmcc HDMI_S_AHB_CLK>;
-			clock-names = "core_clk",
-				      "master_iface_clk",
-				      "slave_iface_clk";
+			clock-names = "core",
+				      "master_iface",
+				      "slave_iface";
 
 			phys = <&hdmi_phy>;
-			phy-names = "hdmi-phy";
+
+			status = "disabled";
 
 			ports {
 				#address-cells = <1>;
@@ -1445,7 +1572,7 @@
 			};
 		};
 
-		hdmi_phy: hdmi-phy@4a00400 {
+		hdmi_phy: phy@4a00400 {
 			compatible = "qcom,hdmi-phy-8960";
 			reg = <0x4a00400 0x60>,
 			      <0x4a00500 0x100>;
@@ -1453,11 +1580,14 @@
 				    "hdmi_pll";
 
 			clocks = <&mmcc HDMI_S_AHB_CLK>;
-			clock-names = "slave_iface_clk";
+			clock-names = "slave_iface";
 			#phy-cells = <0>;
+			#clock-cells = <0>;
+
+			status = "disabled";
 		};
 
-		mdp: mdp@5100000 {
+		mdp: display-controller@5100000 {
 			compatible = "qcom,mdp4";
 			reg = <0x05100000 0xf0000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -1509,7 +1639,7 @@
 			};
 		};
 
-		riva: riva-pil@3204000 {
+		riva: riva-pil@3200800 {
 			compatible = "qcom,riva-pil";
 
 			reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
@@ -1553,7 +1683,7 @@
 
 					qcom,mmio = <&riva>;
 
-					bt {
+					bluetooth {
 						compatible = "qcom,wcnss-bt";
 					};
 
@@ -1572,7 +1702,7 @@
 		};
 
 		etb@1a01000 {
-			compatible = "coresight-etb10", "arm,primecell";
+			compatible = "arm,coresight-etb10", "arm,primecell";
 			reg = <0x1a01000 0x1000>;
 
 			clocks = <&rpmcc RPM_QDSS_CLK>;
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 83793b835d40..1345df7cbd00 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/gpio/gpio.h>
 #include "qcom-msm8974.dtsi"
 #include "qcom-pm8841.dtsi"
 #include "qcom-pm8941.dtsi"
@@ -16,331 +17,291 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+	clock-frequency = <200000>;
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+		pagesize = <32>;
+		read-only;
+	};
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vin_5vs-supply = <&pm8941_5v>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
 
-	soc {
-		serial@f991e000 {
-			status = "okay";
-		};
-
-		sdhci@f9824900 {
-			bus-width = <8>;
-			non-removable;
-			status = "okay";
-
-			vmmc-supply = <&pm8941_l20>;
-			vqmmc-supply = <&pm8941_s3>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdhc1_pin_a>;
-		};
-
-		sdhci@f98a4900 {
-			cd-gpios = <&msmgpio 62 0x1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
-			bus-width = <4>;
-			status = "okay";
-
-			vmmc-supply = <&pm8941_l21>;
-			vqmmc-supply = <&pm8941_l13>;
-		};
-
-		usb@f9a55000 {
-			status = "okay";
-			phys = <&usb_hs2_phy>;
-			phy-select = <&tcsr 0xb000 1>;
-			extcon = <&smbb>, <&usb_id>;
-			vbus-supply = <&chg_otg>;
-			hnp-disable;
-			srp-disable;
-			adp-disable;
-			ulpi {
-				phy@b {
-					status = "okay";
-					v3p3-supply = <&pm8941_l24>;
-					v1p8-supply = <&pm8941_l6>;
-					extcon = <&smbb>;
-					qcom,init-seq = /bits/ 8 <0x1 0x63>;
-				};
-			};
-		};
-
-
-		pinctrl@fd510000 {
-			i2c11_pins: i2c11 {
-				mux {
-					pins = "gpio83", "gpio84";
-					function = "blsp_i2c11";
-				};
-			};
-
-			spi8_default: spi8_default {
-				mosi {
-					pins = "gpio45";
-					function = "blsp_spi8";
-				};
-				miso {
-					pins = "gpio46";
-					function = "blsp_spi8";
-				};
-				cs {
-					pins = "gpio47";
-					function = "blsp_spi8";
-				};
-				clk {
-					pins = "gpio48";
-					function = "blsp_spi8";
-				};
-			};
-
-			sdhc1_pin_a: sdhc1-pin-active {
-				clk {
-					pins = "sdc1_clk";
-					drive-strength = <16>;
-					bias-disable;
-				};
-
-				cmd-data {
-					pins = "sdc1_cmd", "sdc1_data";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-			};
-
-			sdhc2_cd_pin_a: sdhc2-cd-pin-active {
-				pins = "gpio62";
-				function = "gpio";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			sdhc2_pin_a: sdhc2-pin-active {
-				clk {
-					pins = "sdc2_clk";
-					drive-strength = <10>;
-					bias-disable;
-				};
-
-				cmd-data {
-					pins = "sdc2_cmd", "sdc2_data";
-					drive-strength = <6>;
-					bias-pull-up;
-				};
-			};
-		};
-
-		i2c@f9967000 {
-			status = "okay";
-			clock-frequency = <200000>;
-			pinctrl-0 = <&i2c11_pins>;
-			pinctrl-names = "default";
-
-			eeprom: eeprom@52 {
-				compatible = "atmel,24c128";
-				reg = <0x52>;
-				pagesize = <32>;
-				read-only;
-			};
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
 		};
 	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
 
-	smd {
-		rpm {
-			rpm_requests {
-				pm8841-regulators {
-					s1 {
-						regulator-min-microvolt = <675000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s2 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s3 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s4 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-				};
-
-				pm8941-regulators {
-					vdd_l1_l3-supply = <&pm8941_s1>;
-					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-					vdd_l4_l11-supply = <&pm8941_s1>;
-					vdd_l5_l7-supply = <&pm8941_s2>;
-					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-					vin_5vs-supply = <&pm8941_5v>;
-
-					s1 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s2 {
-						regulator-min-microvolt = <2150000>;
-						regulator-max-microvolt = <2150000>;
-						regulator-boot-on;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l1 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l2 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l3 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l4 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l5 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l6 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l7 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l8 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l9 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l10 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-					};
-
-					l11 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-					};
-
-					l12 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l13 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l14 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l15 {
-						regulator-min-microvolt = <2050000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					l16 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l17 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l18 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l19 {
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-					};
-
-					l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-allow-set-load;
-						regulator-boot-on;
-						regulator-system-load = <200000>;
-					};
-
-					l21 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l22 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					l23 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					l24 {
-						regulator-min-microvolt = <3075000>;
-						regulator-max-microvolt = <3075000>;
-
-						regulator-boot-on;
-					};
-				};
-			};
+	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l13>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+};
+
+&tlmm {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
 		};
 	};
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		cd-pins {
+			pins = "gpio62";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs2_phy>;
+	phy-select = <&tcsr 0xb000 1>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs2_phy {
+	status = "okay";
+	v3p3-supply = <&pm8941_l24>;
+	v1p8-supply = <&pm8941_l6>;
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x63>;
 };
diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
index 44cd72f1b1be..116e59a3b76d 100644
--- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
+++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
@@ -19,16 +19,16 @@
 		serial@f995e000 {
 			status = "okay";
 		};
+	};
+};
 
-		sdhci@f9824900 {
-			bus-width = <8>;
-			non-removable;
-			status = "okay";
-		};
+&sdhc_1 {
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
 
-		sdhci@f98a4900 {
-			cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
-			bus-width = <4>;
-		};
-	};
+&sdhc_2 {
+	cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
 };
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index bf6a03506b45..b653ea40c441 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -72,7 +72,7 @@
 		};
 
 		L2: l2-cache {
-			compatible = "qcom,arch-cache";
+			compatible = "cache";
 			cache-level = <2>;
 			qcom,saw = <&saw_l2>;
 		};
@@ -95,14 +95,14 @@
 
 	firmware {
 		scm {
-			compatible = "qcom,scm";
+			compatible = "qcom,scm-apq8084", "qcom,scm";
 			clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
 			clock-names = "core", "bus", "iface";
 		};
 	};
 
 	thermal-zones {
-		cpu-thermal0 {
+		cpu0-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -122,7 +122,7 @@
 			};
 		};
 
-		cpu-thermal1 {
+		cpu1-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -142,7 +142,7 @@
 			};
 		};
 
-		cpu-thermal2 {
+		cpu2-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -162,7 +162,7 @@
 			};
 		};
 
-		cpu-thermal3 {
+		cpu3-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -239,26 +239,334 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
+		sram@fc190000 {
+			compatible = "qcom,apq8084-rpm-stats";
+			reg = <0xfc190000 0x10000>;
+		};
+
 		qfprom: qfprom@fc4bc000 {
+			compatible = "qcom,apq8084-qfprom", "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "qcom,qfprom";
-			reg = <0xfc4bc000 0x1000>;
-			tsens_calib: calib@d0 {
-				reg = <0xd0 0x18>;
+
+			tsens_base1: base1@d0 {
+				reg = <0xd0 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p1: s0-p1@d1 {
+				reg = <0xd1 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s1_p1: s1-p1@d2 {
+				reg = <0xd1 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s2_p1: s2-p1@d2 {
+				reg = <0xd2 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p1: s3-p1@d3 {
+				reg = <0xd3 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p1: s4-p1@d4 {
+				reg = <0xd4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p1: s5-p1@d4 {
+				reg = <0xd4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1: s6-p1@d5 {
+				reg = <0xd5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s7_p1: s7-p1@d6 {
+				reg = <0xd6 0x1>;
+				bits = <2 6>;
 			};
-			tsens_backup: backup@440 {
-				reg = <0x440 0x10>;
+
+			tsens_s8_p1: s8-p1@d7 {
+				reg = <0xd7 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_mode: mode@d7 {
+				reg = <0xd7 0x1>;
+				bits = <6 2>;
+			};
+
+			tsens_s9_p1: s9-p1@d8 {
+				reg = <0xd8 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s10_p1: s10_p1@d8 {
+				reg = <0xd8 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_base2: base2@d9 {
+				reg = <0xd9 0x2>;
+				bits = <4 8>;
+			};
+
+			tsens_s0_p2: s0-p2@da {
+				reg = <0xda 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s1_p2: s1-p2@db {
+				reg = <0xdb 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s2_p2: s2-p2@dc {
+				reg = <0xdc 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s3_p2: s3-p2@dc {
+				reg = <0xdc 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s4_p2: s4-p2@dd {
+				reg = <0xdd 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s5_p2: s5-p2@de {
+				reg = <0xde 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s6_p2: s6-p2@df {
+				reg = <0xdf 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2: s7-p2@e0 {
+				reg = <0xe0 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s8_p2: s8-p2@e0 {
+				reg = <0xe0 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s9_p2: s9-p2@e1 {
+				reg = <0xe1 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s10_p2: s10_p2@e2 {
+				reg = <0xe2 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s5_p2_backup: s5-p2_backup@e3 {
+				reg = <0xe3 0x2>;
+				bits = <0 6>;
+			};
+
+			tsens_mode_backup: mode_backup@e3 {
+				reg = <0xe3 0x1>;
+				bits = <6 2>;
+			};
+
+			tsens_s6_p2_backup: s6-p2_backup@e4 {
+				reg = <0xe4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2_backup: s7-p2_backup@e4 {
+				reg = <0xe4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s8_p2_backup: s8-p2_backup@e5 {
+				reg = <0xe5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s9_p2_backup: s9-p2_backup@e6 {
+				reg = <0xe6 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s10_p2_backup: s10_p2_backup@e7 {
+				reg = <0xe7 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_base1_backup: base1_backup@440 {
+				reg = <0x440 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p1_backup: s0-p1_backup@441 {
+				reg = <0x441 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s1_p1_backup: s1-p1_backup@442 {
+				reg = <0x441 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s2_p1_backup: s2-p1_backup@442 {
+				reg = <0x442 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p1_backup: s3-p1_backup@443 {
+				reg = <0x443 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p1_backup: s4-p1_backup@444 {
+				reg = <0x444 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p1_backup: s5-p1_backup@444 {
+				reg = <0x444 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1_backup: s6-p1_backup@445 {
+				reg = <0x445 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s7_p1_backup: s7-p1_backup@446 {
+				reg = <0x446 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_use_backup: use_backup@447 {
+				reg = <0x447 0x1>;
+				bits = <5 3>;
+			};
+
+			tsens_s8_p1_backup: s8-p1_backup@448 {
+				reg = <0x448 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s9_p1_backup: s9-p1_backup@448 {
+				reg = <0x448 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s10_p1_backup: s10_p1_backup@449 {
+				reg = <0x449 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_base2_backup: base2_backup@44a {
+				reg = <0x44a 0x2>;
+				bits = <2 8>;
+			};
+
+			tsens_s0_p2_backup: s0-p2_backup@44b {
+				reg = <0x44b 0x3>;
+				bits = <2 6>;
+			};
+
+			tsens_s1_p2_backup: s1-p2_backup@44c {
+				reg = <0x44c 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s2_p2_backup: s2-p2_backup@44c {
+				reg = <0x44c 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s3_p2_backup: s3-p2_backup@44d {
+				reg = <0x44d 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s4_p2_backup: s4-p2_backup@44e {
+				reg = <0x44e 0x1>;
+				bits = <2 6>;
 			};
 		};
 
 		tsens: thermal-sensor@fc4a8000 {
-			compatible = "qcom,msm8974-tsens";
+			compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
 			reg = <0xfc4a9000 0x1000>, /* TM */
 			      <0xfc4a8000 0x1000>; /* SROT */
-			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-			nvmem-cell-names = "calib", "calib_backup";
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_use_backup>,
+				      <&tsens_mode_backup>,
+				      <&tsens_base1_backup>, <&tsens_base2_backup>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>,
+				      <&tsens_s10_p1>, <&tsens_s10_p2>,
+				      <&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>,
+				      <&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>,
+				      <&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>,
+				      <&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>,
+				      <&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>,
+				      <&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>,
+				      <&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>,
+				      <&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>,
+				      <&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>,
+				      <&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>,
+				      <&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "use_backup",
+					   "mode_backup",
+					   "base1_backup", "base2_backup",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2",
+					   "s10_p1", "s10_p2",
+					   "s0_p1_backup", "s0_p2_backup",
+					   "s1_p1_backup", "s1_p2_backup",
+					   "s2_p1_backup", "s2_p2_backup",
+					   "s3_p1_backup", "s3_p2_backup",
+					   "s4_p1_backup", "s4_p2_backup",
+					   "s5_p1_backup", "s5_p2_backup",
+					   "s6_p1_backup", "s6_p2_backup",
+					   "s7_p1_backup", "s7_p2_backup",
+					   "s8_p1_backup", "s8_p2_backup",
+					   "s9_p1_backup", "s9_p2_backup",
+					   "s10_p1_backup", "s10_p2_backup";
 			#qcom,sensors = <11>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
 			#thermal-sensor-cells = <1>;
 		};
 		timer@f9020000 {
@@ -346,25 +654,25 @@
 			regulator;
 		};
 
-		acc0: clock-controller@f9088000 {
+		acc0: power-manager@f9088000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9088000 0x1000>,
 			      <0xf9008000 0x1000>;
 		};
 
-		acc1: clock-controller@f9098000 {
+		acc1: power-manager@f9098000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9098000 0x1000>,
 			      <0xf9008000 0x1000>;
 		};
 
-		acc2: clock-controller@f90a8000 {
+		acc2: power-manager@f90a8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90a8000 0x1000>,
 			      <0xf9008000 0x1000>;
 		};
 
-		acc3: clock-controller@f90b8000 {
+		acc3: power-manager@f90b8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90b8000 0x1000>,
 			      <0xf9008000 0x1000>;
@@ -381,20 +689,33 @@
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
 			reg = <0xfc400000 0x4000>;
-		};
-
-		tcsr_mutex_regs: syscon@fd484000 {
-			compatible = "syscon";
-			reg = <0xfd484000 0x2000>;
-		};
-
-		tcsr_mutex: hwlock {
-			compatible = "qcom,tcsr-mutex";
-			syscon = <&tcsr_mutex_regs 0 0x80>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <0>, /* ufs */
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>, /* sata */
+				 <0>,
+				 <0>; /* pcie */
+			clock-names = "xo",
+				      "sleep_clk",
+				      "ufs_rx_symbol_0_clk_src",
+				      "ufs_rx_symbol_1_clk_src",
+				      "ufs_tx_symbol_0_clk_src",
+				      "ufs_tx_symbol_1_clk_src",
+				      "sata_asic0_clk",
+				      "sata_rx_clk",
+				      "pcie_pipe";
+		};
+
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,apq8084-tcsr-mutex", "qcom,tcsr-mutex";
+			reg = <0xfd484000 0x1000>;
 			#hwlock-cells = <1>;
 		};
 
-		rpm_msg_ram: memory@fc428000 {
+		rpm_msg_ram: sram@fc428000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0xfc428000 0x4000>;
 		};
@@ -419,29 +740,29 @@
 			status = "disabled";
 		};
 
-		sdhci@f9824900 {
+		sdhc_1: mmc@f9824900 {
 			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-			reg-names = "hc_mem", "core_mem";
+			reg-names = "hc", "core";
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_SDCC1_AHB_CLK>,
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
+			clock-names = "iface", "core", "xo";
 			status = "disabled";
 		};
 
-		sdhci@f98a4900 {
+		sdhc_2: mmc@f98a4900 {
 			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-			reg-names = "hc_mem", "core_mem";
+			reg-names = "hc", "core";
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&gcc GCC_SDCC2_AHB_CLK>,
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
+			clock-names = "iface", "core", "xo";
 			status = "disabled";
 		};
 
@@ -470,11 +791,11 @@
 			qcom,ipc = <&apcs 8 0>;
 			qcom,smd-edge = <15>;
 
-			rpm_requests {
+			rpm-requests {
 				compatible = "qcom,rpm-apq8084";
 				qcom,smd-channels = "rpm_requests";
 
-				pma8084-regulators {
+				regulators-0 {
 					compatible = "qcom,rpm-pma8084-regulators";
 
 					pma8084_s1: s1 {};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
index 028ac8e24797..1b27edce9d4f 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
+#include <dt-bindings/leds/common.h>
 #include "qcom-ipq4018-ap120c-ac.dtsi"
 
 / {
@@ -8,19 +9,24 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "ap120c-ac:green:power";
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		wlan {
+		led-wlan {
 			label = "ap120c-ac:green:wlan";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 		};
 
-		support {
+		led-support {
 			label = "ap120c-ac:green:support";
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 			panic-indicator;
 		};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
index b7916fc26d68..a707057c887d 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
@@ -1,25 +1,32 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
+#include <dt-bindings/leds/common.h>
 #include "qcom-ipq4018-ap120c-ac.dtsi"
 
 / {
 	leds {
 		compatible = "gpio-leds";
 
-		status: status {
+		status: led-status {
 			label = "ap120c-ac:blue:status";
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
 
-		wlan2g {
+		led-wlan2g {
 			label = "ap120c-ac:green:wlan2g";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy0tpt";
 		};
 
-		wlan5g {
+		led-wlan5g {
 			label = "ap120c-ac:red:wlan5g";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_RED>;
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "phy1tpt";
 		};
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
index 1f3b1ce82108..d90b4f4c63af 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
@@ -6,12 +6,20 @@
 
 / {
 	model = "ALFA Network AP120C-AC";
-	compatible = "alfa-network,ap120c-ac";
+	compatible = "alfa-network,ap120c-ac", "qcom,ipq4018";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
 	keys {
 		compatible = "gpio-keys";
 
-		reset {
+		key-reset {
 			label = "reset";
 			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
@@ -68,7 +76,7 @@
 		};
 	};
 
-	usb-power {
+	usb-power-hog {
 		line-name = "USB-power";
 		gpios = <1 GPIO_ACTIVE_HIGH>;
 		gpio-hog;
@@ -162,6 +170,17 @@
 				label = "ART";
 				reg = <0x00170000 0x00010000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
 			};
 
 			partition@180000 {
@@ -178,7 +197,7 @@
 		};
 	};
 
-	nand@1 {
+	flash@1 {
 		compatible = "spi-nand";
 		reg = <1>;
 		spi-max-frequency = <40000000>;
@@ -225,10 +244,14 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
 };
 
diff --git a/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
index 394412619894..365fbac417fd 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
+++ b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
@@ -7,7 +7,7 @@
 
 / {
 	model = "8devices Jalapeno";
-	compatible = "8dev,jalapeno";
+	compatible = "8dev,jalapeno", "qcom,ipq4018";
 };
 
 &tlmm {
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
index 0d92f1bc3a13..ddaa273f72ca 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
@@ -18,5 +18,5 @@
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
-
+	compatible = "qcom,ipq4019-ap-dk01.1-c1", "qcom,ipq4019";
 };
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index c93b2164db44..0505270cf508 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -14,11 +14,11 @@
  *
  */
 
+#include <dt-bindings/gpio/gpio.h>
 #include "qcom-ipq4019.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
-	compatible = "qcom,ipq4019";
 
 	aliases {
 		serial0 = &blsp1_uart1;
@@ -65,7 +65,7 @@
 			};
 		};
 
-		blsp_dma: dma@7884000 {
+		blsp_dma: dma-controller@7884000 {
 			status = "okay";
 		};
 
@@ -73,7 +73,7 @@
 			pinctrl-0 = <&spi_0_pins>;
 			pinctrl-names = "default";
 			status = "okay";
-			cs-gpios = <&tlmm 54 0>;
+			cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 
 			mx25l25635e@0 {
 				#address-cells = <1>;
@@ -90,7 +90,7 @@
 			status = "okay";
 		};
 
-		cryptobam: dma@8e04000 {
+		cryptobam: dma-controller@8e04000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
index b0f476ff017f..79b0c6318e52 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
@@ -5,10 +5,10 @@
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1";
-	compatible = "qcom,ipq4019-dk04.1-c1";
+	compatible = "qcom,ipq4019-dk04.1-c1", "qcom,ipq4019";
 
 	soc {
-		dma@7984000 {
+		dma-controller@7984000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
index 2d1c4c6e42f1..7765247125e4 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
@@ -5,5 +5,5 @@
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3";
-	compatible = "qcom,ipq4019-ap-dk04.1-c3";
+	compatible = "qcom,ipq4019-ap-dk04.1-c3", "qcom,ipq4019";
 };
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
index 7a337dc08741..a63b3778636d 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -79,7 +79,7 @@
 			status = "okay";
 		};
 
-		dma@7884000 {
+		dma-controller@7884000 {
 			status = "okay";
 		};
 
@@ -87,20 +87,20 @@
 			pinctrl-0 = <&spi_0_pins>;
 			pinctrl-names = "default";
 			status = "okay";
-			cs-gpios = <&tlmm 12 0>;
+			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 
-			m25p80@0 {
+			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0>;
-				compatible = "n25q128a11";
+				compatible = "micron,n25q128a11", "jedec,spi-nor";
 				spi-max-frequency = <24000000>;
 			};
 		};
 
 		pci@40000000 {
 			status = "okay";
-			perst-gpio = <&tlmm 38 0x1>;
+			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 		};
 
 		qpic-nand@79b0000 {
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
index f343a2244386..ea2987fcbff8 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -1,16 +1,17 @@
 // SPDX-License-Identifier: GPL-2.0
 // Copyright (c) 2018, The Linux Foundation. All rights reserved.
 
+#include <dt-bindings/gpio/gpio.h>
 #include "qcom-ipq4019-ap.dk07.1.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
-	compatible = "qcom,ipq4019-ap-dk07.1-c1";
+	compatible = "qcom,ipq4019-ap-dk07.1-c1", "qcom,ipq4019";
 
 	soc {
 		pci@40000000 {
 			status = "okay";
-			perst-gpio = <&tlmm 38 0x1>;
+			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 		};
 
 		spi@78b6000 {
@@ -50,13 +51,13 @@
 			pinctrl-0 = <&spi_0_pins>;
 			pinctrl-names = "default";
 			status = "okay";
-			cs-gpios = <&tlmm 12 0>;
+			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 
-			m25p80@0 {
+			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0>;
-				compatible = "n25q128a11";
+				compatible = "micron,n25q128a11", "jedec,spi-nor";
 				spi-max-frequency = <24000000>;
 			};
 		};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
index 582acb681a98..bd3553dd2070 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts
@@ -5,7 +5,7 @@
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C2";
-	compatible = "qcom,ipq4019-ap-dk07.1-c2";
+	compatible = "qcom,ipq4019-ap-dk07.1-c2", "qcom,ipq4019";
 
 	soc {
 		pinctrl@1000000 {
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
index 94872518b5a2..0107f552f520 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
@@ -52,7 +52,7 @@
 			status = "okay";
 		};
 
-		dma@7884000 {
+		dma-controller@7884000 {
 			status = "okay";
 		};
 
@@ -62,7 +62,7 @@
 			status = "okay";
 		};
 
-		dma@7984000 {
+		dma-controller@7984000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 7bf1da916f25..dfcfb3339c23 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -106,7 +106,7 @@
 		};
 	};
 
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -142,7 +142,7 @@
 	clocks {
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			clock-frequency = <32000>;
 			#clock-cells = <0>;
 		};
 
@@ -155,7 +155,7 @@
 
 	firmware {
 		scm {
-			compatible = "qcom,scm-ipq4019";
+			compatible = "qcom,scm-ipq4019", "qcom,scm";
 		};
 	};
 
@@ -186,8 +186,11 @@
 		gcc: clock-controller@1800000 {
 			compatible = "qcom,gcc-ipq4019";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x1800000 0x60000>;
+			clocks = <&xo>, <&sleep_clk>;
+			clock-names = "xo", "sleep_clk";
 		};
 
 		prng: rng@22000 {
@@ -219,19 +222,20 @@
 			status = "disabled";
 		};
 
-		sdhci: sdhci@7824900 {
+		sdhci: mmc@7824900 {
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0x7824900 0x11c>, <0x7824000 0x800>;
+			reg-names = "hc", "core";
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			bus-width = <8>;
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>,
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&gcc GCC_DCD_XO_CLK>;
-			clock-names = "core", "iface", "xo";
+			clock-names = "iface", "core", "xo";
 			status = "disabled";
 		};
 
-		blsp_dma: dma@7884000 {
+		blsp_dma: dma-controller@7884000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x07884000 0x23000>;
 			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
@@ -251,8 +255,8 @@
 			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			dmas = <&blsp_dma 5>, <&blsp_dma 4>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -265,8 +269,8 @@
 			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			dmas = <&blsp_dma 7>, <&blsp_dma 6>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -274,13 +278,13 @@
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x78b7000 0x600>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				 <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
-			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			dmas = <&blsp_dma 9>, <&blsp_dma 8>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -288,17 +292,17 @@
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x78b8000 0x600>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
-				 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
-			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			dmas = <&blsp_dma 11>, <&blsp_dma 10>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
-		cryptobam: dma@8e04000 {
+		cryptobam: dma-controller@8e04000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x08e04000 0x20000>;
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
@@ -322,22 +326,22 @@
 			status = "disabled";
 		};
 
-		acc0: clock-controller@b088000 {
+		acc0: power-manager@b088000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
 		};
 
-		acc1: clock-controller@b098000 {
+		acc1: power-manager@b098000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
 		};
 
-		acc2: clock-controller@b0a8000 {
+		acc2: power-manager@b0a8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
 		};
 
-		acc3: clock-controller@b0b8000 {
+		acc3: power-manager@b0b8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
 		};
@@ -345,7 +349,7 @@
 		saw0: regulator@b089000 {
 			compatible = "qcom,saw2";
 			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
-                        regulator;
+			regulator;
 		};
 
 		saw1: regulator@b099000 {
@@ -380,8 +384,8 @@
 			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
 				<&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 1>, <&blsp_dma 0>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
+			dma-names = "tx", "rx";
 		};
 
 		blsp1_uart2: serial@78b0000 {
@@ -392,12 +396,12 @@
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
 				<&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			dmas = <&blsp_dma 3>, <&blsp_dma 2>;
-			dma-names = "rx", "tx";
+			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
+			dma-names = "tx", "rx";
 		};
 
 		watchdog: watchdog@b017000 {
-			compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
+			compatible = "qcom,kpss-wdt-ipq4019", "qcom,kpss-wdt";
 			reg = <0xb017000 0x40>;
 			clocks = <&sleep_clk>;
 			timeout-sec = <10>;
@@ -410,7 +414,7 @@
 		};
 
 		pcie0: pci@40000000 {
-			compatible = "qcom,pcie-ipq4019", "snps,dw-pcie";
+			compatible = "qcom,pcie-ipq4019";
 			reg =  <0x40000000 0xf1d
 				0x40000f20 0xa8
 				0x80000 0x2000
@@ -423,8 +427,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
-				 <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
+			ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>,
+				 <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -469,7 +473,7 @@
 			status = "disabled";
 		};
 
-		qpic_bam: dma@7984000 {
+		qpic_bam: dma-controller@7984000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x7984000 0x1a000>;
 			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
@@ -480,7 +484,7 @@
 			status = "disabled";
 		};
 
-		nand: qpic-nand@79b0000 {
+		nand: nand-controller@79b0000 {
 			compatible = "qcom,ipq4019-nand";
 			reg = <0x79b0000 0x1000>;
 			#address-cells = <1>;
@@ -637,14 +641,14 @@
 		};
 
 		usb3: usb3@8af8800 {
-			compatible = "qcom,dwc3";
+			compatible = "qcom,ipq4019-dwc3", "qcom,dwc3";
 			reg = <0x8af8800 0x100>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			clocks = <&gcc GCC_USB3_MASTER_CLK>,
 				 <&gcc GCC_USB3_SLEEP_CLK>,
 				 <&gcc GCC_USB3_MOCK_UTMI_CLK>;
-			clock-names = "master", "sleep", "mock_utmi";
+			clock-names = "core", "sleep", "mock_utmi";
 			ranges;
 			status = "disabled";
 
@@ -669,7 +673,7 @@
 		};
 
 		usb2: usb2@60f8800 {
-			compatible = "qcom,dwc3";
+			compatible = "qcom,ipq4019-dwc3", "qcom,dwc3";
 			reg = <0x60f8800 0x100>;
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi
new file mode 100644
index 000000000000..9d06255104c7
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "qcom-ipq8062.dtsi"
+
+&rpm {
+	smb208_regulators: regulators {
+		compatible = "qcom,rpm-smb208-regulators";
+
+		smb208_s1a: s1a {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s1b: s1b {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2a: s2a {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2b: s2b {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8062.dtsi b/arch/arm/boot/dts/qcom-ipq8062.dtsi
new file mode 100644
index 000000000000..5d3ebd3e2e51
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8062.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8062";
+	compatible = "qcom,ipq8062", "qcom,ipq8064";
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index e5b9b9cf6097..a654d3c22c4f 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -3,16 +3,10 @@
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
-	compatible = "qcom,ipq8064-ap148";
+	compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
 
 	soc {
 		pinmux@800000 {
-			i2c4_pins: i2c4_pinmux {
-				pins = "gpio12", "gpio13";
-				function = "gsbi4";
-				bias-disable;
-			};
-
 			buttons_pins: buttons_pins {
 				mux {
 					pins = "gpio54", "gpio65";
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 282b89ce3d45..4d509876294b 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -1,10 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-ipq8064.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "MikroTik RB3011UiAS-RM";
-	compatible = "mikrotik,rb3011";
+	compatible = "mikrotik,rb3011", "qcom,ipq8064";
 
 	aliases {
 		serial0 = &gsbi7_serial;
@@ -19,12 +20,12 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@0 {
+	memory@42000000 {
 		reg = <0x42000000 0x3e000000>;
 		device_type = "memory";
 	};
 
-	mdio0: mdio@0 {
+	mdio0: mdio-0 {
 		status = "okay";
 		compatible = "virtual,mdio-gpio";
 		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
@@ -37,8 +38,6 @@
 
 		switch0: switch@10 {
 			compatible = "qca,qca8337";
-			#address-cells = <1>;
-			#size-cells = <0>;
 
 			dsa,member = <0 0>;
 
@@ -66,32 +65,92 @@
 				port@1 {
 					reg = <1>;
 					label = "sw1";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 
 				port@2 {
 					reg = <2>;
 					label = "sw2";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 
 				port@3 {
 					reg = <3>;
 					label = "sw3";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 
 				port@4 {
 					reg = <4>;
 					label = "sw4";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 
 				port@5 {
 					reg = <5>;
 					label = "sw5";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 			};
 		};
 	};
 
-	mdio1: mdio@1 {
+	mdio1: mdio-1 {
 		status = "okay";
 		compatible = "virtual,mdio-gpio";
 		gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
@@ -104,8 +163,6 @@
 
 		switch1: switch@14 {
 			compatible = "qca,qca8337";
-			#address-cells = <1>;
-			#size-cells = <0>;
 
 			dsa,member = <1 0>;
 
@@ -133,26 +190,86 @@
 				port@1 {
 					reg = <1>;
 					label = "sw6";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 
 				port@2 {
 					reg = <2>;
 					label = "sw7";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 
 				port@3 {
 					reg = <3>;
 					label = "sw8";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 
 				port@4 {
 					reg = <4>;
 					label = "sw9";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 
 				port@5 {
 					reg = <5>;
 					label = "sw10";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							default-state = "keep";
+						};
+					};
 				};
 			};
 		};
@@ -172,7 +289,7 @@
 
 				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
 
-				norflash: s25fl016k@0 {
+				norflash: flash@0 {
 					compatible = "jedec,spi-nor";
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -187,12 +304,12 @@
 			};
 		};
 
-		gpio_keys {
+		gpio-keys {
 			compatible = "gpio-keys";
 			pinctrl-0 = <&buttons_pins>;
 			pinctrl-names = "default";
 
-			button@1 {
+			button {
 				label = "reset";
 				linux,code = <KEY_RESTART>;
 				gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
@@ -208,6 +325,7 @@
 
 			led@7 {
 				label = "rb3011:green:user";
+				color = <LED_COLOR_ID_GREEN>;
 				gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
@@ -216,6 +334,10 @@
 	};
 };
 
+&adm_dma {
+	status = "okay";
+};
+
 &gmac0 {
 	status = "okay";
 
@@ -251,6 +373,38 @@
 	status = "okay";
 };
 
+&hs_phy_1 {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				label = "RouterBoard NAND 1 Boot";
+				reg = <0x0000000 0x0800000>;
+			};
+
+			main@800000 {
+				label = "RouterBoard NAND 1 Main";
+				reg = <0x0800000 0x7800000>;
+			};
+		};
+	};
+};
+
 &qcom_pinmux {
 	buttons_pins: buttons_pins {
 		mux {
@@ -268,15 +422,6 @@
 		};
 	};
 
-	mdio0_pins: mdio0_pins {
-		mux {
-			pins = "gpio0", "gpio1";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
 	mdio1_pins: mdio1_pins {
 		mux {
 			pins = "gpio10", "gpio11";
@@ -305,4 +450,25 @@
 			input-disable;
 		};
 	};
+
+	usb1_pwr_en_pins: usb1_pwr_en_pins {
+		mux {
+			pins = "gpio4";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&ss_phy_1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	pinctrl-0 = <&usb1_pwr_en_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
new file mode 100644
index 000000000000..ac9c44f0c164
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064.dtsi"
+
+&rpm {
+	smb208_regulators: regulators {
+		compatible = "qcom,rpm-smb208-regulators";
+
+		smb208_s1a: s1a {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s1b: s1b {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2a: s2a {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1250000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2b: s2b {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1250000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
index 65330065390a..411c8d63c38e 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-ipq8064.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
@@ -36,7 +37,7 @@
 
 				cs-gpios = <&qcom_pinmux 20 0>;
 
-				flash: m25p80@0 {
+				flash: flash@0 {
 					compatible = "s25fl256s1";
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -65,19 +66,19 @@
 			status = "okay";
 		};
 
-		gpio_keys {
+		gpio-keys {
 			compatible = "gpio-keys";
 			pinctrl-0 = <&buttons_pins>;
 			pinctrl-names = "default";
 
-			button@1 {
+			button-1 {
 				label = "reset";
 				linux,code = <KEY_RESTART>;
 				gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
 				linux,input-type = <1>;
 				debounce-interval = <60>;
 			};
-			button@2 {
+			button-2 {
 				label = "wps";
 				linux,code = <KEY_WPS_BUTTON>;
 				gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
@@ -107,6 +108,7 @@
 
 			led@9 {
 				label = "status_led_fail";
+				function = LED_FUNCTION_STATUS;
 				gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
@@ -119,6 +121,7 @@
 
 			led@53 {
 				label = "status_led_pass";
+				function = LED_FUNCTION_STATUS;
 				gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
new file mode 100644
index 000000000000..0442580b22de
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+&rpm {
+	smb208_regulators: regulators {
+		compatible = "qcom,rpm-smb208-regulators";
+
+		smb208_s1a: s1a {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s1b: s1b {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2a: s2a {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1250000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2b: s2b {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1250000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
new file mode 100644
index 000000000000..2f117d576daf
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8064-v2.0";
+
+	aliases {
+		serial0 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+
+	serial@16340000 {
+		status = "okay";
+	};
+	/*
+	 * The i2c device on gsbi4 should not be enabled.
+	 * On ipq806x designs gsbi4 i2c is meant for exclusive
+	 * RPM usage. Turning this on in kernel manifests as
+	 * i2c failure for the RPM.
+	 */
+};
+
+&pcie0 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie1 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie2 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&sata {
+	ports-implemented = <0x1>;
+};
+
+&ss_phy_0 {
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
+};
+
+&ss_phy_1 {
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 98995ead4413..af6764770fd1 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -2,6 +2,8 @@
 /dts-v1/;
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
 #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -46,6 +48,228 @@
 		};
 	};
 
+	thermal-zones {
+		sensor0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor4-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor5-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor6-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor7-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor8-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor9-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		sensor10-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				cpu-critical {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu-hot {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x0 0x0>;
@@ -68,19 +292,22 @@
 		};
 
 		smem: smem@41000000 {
+			compatible = "qcom,smem";
 			reg = <0x41000000 0x200000>;
 			no-map;
+
+			hwlocks = <&sfpb_mutex 3>;
 		};
 	};
 
 	clocks {
-		cxo_board {
+		cxo_board: cxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
 		};
 
-		pxo_board {
+		pxo_board: pxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
@@ -99,30 +326,70 @@
 		};
 	};
 
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,wr_osr_lmt = <7>;
+		snps,rd_osr_lmt = <7>;
+		snps,blen = <16 0 0 0 0 0 0>;
+	};
+
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 		compatible = "simple-bus";
 
-		lpass@28100000 {
-			compatible = "qcom,lpass-cpu";
-			status = "disabled";
-			clocks = <&lcc AHBIX_CLK>,
-					<&lcc MI2S_OSR_CLK>,
-					<&lcc MI2S_BIT_CLK>;
-			clock-names = "ahbix-clk",
-					"mi2s-osr-clk",
-					"mi2s-bit-clk";
-			interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "lpass-irq-lpaif";
-			reg = <0x28100000 0x10000>;
-			reg-names = "lpass-lpaif";
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-ipq8064";
+			reg = <0x00108000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ack", "err", "wakeup";
+
+			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+			clock-names = "ram";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		qfprom: qfprom@700000 {
+			compatible = "qcom,ipq8064-qfprom", "qcom,qfprom";
+			reg = <0x00700000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			speedbin_efuse: speedbin@c0 {
+				reg = <0xc0 0x4>;
+			};
+			tsens_calib: calib@400 {
+				reg = <0x400 0xb>;
+			};
+			tsens_calib_backup: calib_backup@410 {
+				reg = <0x410 0xb>;
+			};
 		};
 
 		qcom_pinmux: pinmux@800000 {
 			compatible = "qcom,ipq8064-pinctrl";
-			reg = <0x800000 0x4000>;
+			reg = <0x00800000 0x4000>;
 
 			gpio-controller;
 			gpio-ranges = <&qcom_pinmux 0 0 69>;
@@ -158,6 +425,13 @@
 				};
 			};
 
+			i2c4_pins: i2c4-default {
+				pins = "gpio12", "gpio13";
+				function = "gsbi4";
+				drive-strength = <12>;
+				bias-disable;
+			};
+
 			spi_pins: spi_pins {
 				mux {
 					pins = "gpio18", "gpio19", "gpio21";
@@ -185,6 +459,85 @@
 					bias-pull-up;
 				};
 			};
+
+			nand_pins: nand_pins {
+				mux {
+					pins = "gpio34", "gpio35", "gpio36",
+					       "gpio37", "gpio38", "gpio39",
+					       "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					function = "nand";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				pullups {
+					pins = "gpio39";
+					function = "nand";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				hold {
+					pins = "gpio40", "gpio41", "gpio42",
+					       "gpio43", "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					function = "nand";
+					drive-strength = <10>;
+					bias-bus-hold;
+				};
+			};
+
+			mdio0_pins: mdio0-pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "mdio";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			rgmii2_pins: rgmii2-pins {
+				mux {
+					pins = "gpio27", "gpio28", "gpio29",
+					       "gpio30", "gpio31", "gpio32",
+					       "gpio51", "gpio52", "gpio59",
+					       "gpio60", "gpio61", "gpio62";
+					function = "rgmii2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-ipq8064", "syscon";
+			clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>;
+			clock-names = "pxo", "cxo", "pll4";
+			reg = <0x00900000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			tsens: thermal-sensor@900000 {
+				compatible = "qcom,ipq8064-tsens";
+
+				nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+				nvmem-cell-names = "calib", "calib_backup";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uplow";
+
+				#qcom,sensors = <11>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+
+		sfpb_mutex: hwlock@1200600 {
+			compatible = "qcom,sfpb-mutex";
+			reg = <0x01200600 0x100>;
+
+			#hwlock-cells = <1>;
 		};
 
 		intc: interrupt-controller@2000000 {
@@ -196,8 +549,8 @@
 		};
 
 		timer@200a000 {
-			compatible = "qcom,kpss-timer",
-				     "qcom,kpss-wdt-ipq8064", "qcom,msm-timer";
+			compatible = "qcom,kpss-wdt-ipq8064", "qcom,kpss-timer",
+				     "qcom,msm-timer";
 			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) |
 						 IRQ_TYPE_EDGE_RISING)>,
 				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) |
@@ -209,21 +562,27 @@
 				     <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) |
 						 IRQ_TYPE_EDGE_RISING)>;
 			reg = <0x0200a000 0x100>;
-			clock-frequency = <25000000>,
-					  <32768>;
+			clock-frequency = <25000000>;
 			clocks = <&sleep_clk>;
 			clock-names = "sleep";
 			cpu-offset = <0x80000>;
 		};
 
-		acc0: clock-controller@2088000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+		l2cc: clock-controller@2011000 {
+			compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon";
+			reg = <0x02011000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			#clock-cells = <0>;
 		};
 
-		acc1: clock-controller@2098000 {
+		acc0: clock-controller@2088000 {
 			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu0_aux";
+			#clock-cells = <0>;
 		};
 
 		saw0: regulator@2089000 {
@@ -232,12 +591,220 @@
 			regulator;
 		};
 
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu1_aux";
+			#clock-cells = <0>;
+		};
+
 		saw1: regulator@2099000 {
 			compatible = "qcom,saw2";
 			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
 			regulator;
 		};
 
+		nss_common: syscon@03000000 {
+			compatible = "syscon";
+			reg = <0x03000000 0x0000FFFF>;
+		};
+
+		usb3_0: usb3@100f8800 {
+			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x100f8800 0x8000>;
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			clock-names = "core";
+
+			ranges;
+
+			resets = <&gcc USB30_0_MASTER_RESET>;
+			reset-names = "master";
+
+			status = "disabled";
+
+			dwc3_0: dwc3@10000000 {
+				compatible = "snps,dwc3";
+				reg = <0x10000000 0xcd00>;
+				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hs_phy_0>, <&ss_phy_0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "host";
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		hs_phy_0: phy@100f8800 {
+			compatible = "qcom,ipq806x-usb-phy-hs";
+			reg = <0x100f8800 0x30>;
+			clocks = <&gcc USB30_0_UTMI_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ss_phy_0: phy@100f8830 {
+			compatible = "qcom,ipq806x-usb-phy-ss";
+			reg = <0x100f8830 0x30>;
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb3_1: usb3@110f8800 {
+			compatible = "qcom,ipq8064-dwc3", "qcom,dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x110f8800 0x8000>;
+			clocks = <&gcc USB30_1_MASTER_CLK>;
+			clock-names = "core";
+
+			ranges;
+
+			resets = <&gcc USB30_1_MASTER_RESET>;
+			reset-names = "master";
+
+			status = "disabled";
+
+			dwc3_1: dwc3@11000000 {
+				compatible = "snps,dwc3";
+				reg = <0x11000000 0xcd00>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hs_phy_1>, <&ss_phy_1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "host";
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		hs_phy_1: phy@110f8800 {
+			compatible = "qcom,ipq806x-usb-phy-hs";
+			reg = <0x110f8800 0x30>;
+			clocks = <&gcc USB30_1_UTMI_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ss_phy_1: phy@110f8830 {
+			compatible = "qcom,ipq806x-usb-phy-ss";
+			reg = <0x110f8830 0x30>;
+			clocks = <&gcc USB30_1_MASTER_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		sdcc3bam: dma-controller@12182000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc1bam: dma-controller@12402000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x8000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		amba: amba {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sdcc3: mmc@12180000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status = "disabled";
+				reg = <0x12180000 0x2000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency = <192000000>;
+				sd-uhs-sdr104;
+				sd-uhs-ddr50;
+				vqmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+				dma-names = "tx", "rx";
+			};
+
+			sdcc1: mmc@12400000 {
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg = <0x12400000 0x2000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <96000000>;
+				non-removable;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		gsbi1: gsbi@12440000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x12440000 0x100>;
+			cell-index = <1>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			status = "disabled";
+
+			gsbi1_serial: serial@12450000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x12450000 0x100>,
+				      <0x12400000 0x03>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+
+				status = "disabled";
+			};
+
+			gsbi1_i2c: i2c@12460000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x12460000 0x1000>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
 		gsbi2: gsbi@12480000 {
 			compatible = "qcom,gsbi-v1.0.0";
 			cell-index = <2>;
@@ -261,7 +828,7 @@
 				status = "disabled";
 			};
 
-			i2c@124a0000 {
+			gsbi2_i2c: i2c@124a0000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
 				reg = <0x124a0000 0x1000>;
 				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
@@ -312,53 +879,46 @@
 			};
 		};
 
-		gsbi5: gsbi@1a200000 {
+		gsbi6: gsbi@16500000 {
 			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <5>;
-			reg = <0x1a200000 0x100>;
-			clocks = <&gcc GSBI5_H_CLK>;
+			reg = <0x16500000 0x100>;
+			cell-index = <6>;
+			clocks = <&gcc GSBI6_H_CLK>;
 			clock-names = "iface";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			status = "disabled";
 
 			syscon-tcsr = <&tcsr>;
 
-			gsbi5_serial: serial@1a240000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x1a240000 0x1000>,
-				      <0x1a200000 0x1000>;
-				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
+			status = "disabled";
 
-			i2c@1a280000 {
+			gsbi6_i2c: i2c@16580000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x1a280000 0x1000>;
-				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x16580000 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 
-				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
 				clock-names = "core", "iface";
-				status = "disabled";
 
 				#address-cells = <1>;
 				#size-cells = <0>;
+
+				status = "disabled";
 			};
 
-			spi@1a280000 {
+			gsbi6_spi: spi@16580000 {
 				compatible = "qcom,spi-qup-v1.1.1";
-				reg = <0x1a280000 0x1000>;
-				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x16580000 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 
-				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
 				clock-names = "core", "iface";
-				status = "disabled";
 
 				#address-cells = <1>;
 				#size-cells = <0>;
+
+				status = "disabled";
 			};
 		};
 
@@ -383,66 +943,91 @@
 				clock-names = "core", "iface";
 				status = "disabled";
 			};
-		};
 
-		rng@1a500000 {
-			compatible = "qcom,prng";
-			reg = <0x1a500000 0x200>;
-			clocks = <&gcc PRNG_CLK>;
-			clock-names = "core";
-		};
+			gsbi7_i2c: i2c@16680000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16680000 0x1000>;
+				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 
-		sata_phy: sata-phy@1b400000 {
-			compatible = "qcom,ipq806x-sata-phy";
-			reg = <0x1b400000 0x200>;
+				clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
 
-			clocks = <&gcc SATA_PHY_CFG_CLK>;
-			clock-names = "cfg";
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-			#phy-cells = <0>;
-			status = "disabled";
+				status = "disabled";
+			};
 		};
 
-		sata: sata@29000000 {
-			compatible = "qcom,ipq806x-ahci", "generic-ahci";
-			reg = <0x29000000 0x180>;
+		adm_dma: dma-controller@18300000 {
+			compatible = "qcom,adm";
+			reg = <0x18300000 0x100000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
 
-			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+			clock-names = "core", "iface";
 
-			clocks = <&gcc SFAB_SATA_S_H_CLK>,
-				 <&gcc SATA_H_CLK>,
-				 <&gcc SATA_A_CLK>,
-				 <&gcc SATA_RXOOB_CLK>,
-				 <&gcc SATA_PMALIVE_CLK>;
-			clock-names = "slave_face", "iface", "core",
-					"rxoob", "pmalive";
-
-			assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
-			assigned-clock-rates = <100000000>, <100000000>;
+			resets = <&gcc ADM0_RESET>,
+				 <&gcc ADM0_PBUS_RESET>,
+				 <&gcc ADM0_C0_RESET>,
+				 <&gcc ADM0_C1_RESET>,
+				 <&gcc ADM0_C2_RESET>;
+			reset-names = "clk", "pbus", "c0", "c1", "c2";
+			qcom,ee = <0>;
 
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
 			status = "disabled";
 		};
 
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x00500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-		};
-
-		qfprom: qfprom@700000 {
-			compatible = "qcom,qfprom";
-			reg = <0x00700000 0x1000>;
+		gsbi5: gsbi@1a200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x1a200000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
 			#address-cells = <1>;
+
 			#size-cells = <1>;
-		};
+			ranges;
+			status = "disabled";
 
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-ipq8064";
-			reg = <0x00900000 0x4000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
+			syscon-tcsr = <&tcsr>;
+
+			gsbi5_serial: serial@1a240000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x1a240000 0x1000>,
+				      <0x1a200000 0x1000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			i2c@1a280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			spi@1a280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		tcsr: syscon@1a400000 {
@@ -450,11 +1035,44 @@
 			reg = <0x1a400000 0x100>;
 		};
 
-		lcc: clock-controller@28000000 {
-			compatible = "qcom,lcc-ipq8064";
-			reg = <0x28000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+		};
+
+		nand: nand-controller@1ac00000 {
+			compatible = "qcom,ipq806x-nand";
+			reg = <0x1ac00000 0x800>;
+
+			pinctrl-0 = <&nand_pins>;
+			pinctrl-names = "default";
+
+			clocks = <&gcc EBI2_CLK>,
+				 <&gcc EBI2_AON_CLK>;
+			clock-names = "core", "aon";
+
+			dmas = <&adm_dma 3>;
+			dma-names = "rxtx";
+			qcom,cmd-crci = <15>;
+			qcom,data-crci = <3>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		sata_phy: sata-phy@1b400000 {
+			compatible = "qcom,ipq806x-sata-phy";
+			reg = <0x1b400000 0x200>;
+
+			clocks = <&gcc SATA_PHY_CFG_CLK>;
+			clock-names = "cfg";
+
+			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		pcie0: pci@1b500000 {
@@ -471,8 +1089,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000   /* downstream I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -505,7 +1123,7 @@
 			pinctrl-names = "default";
 
 			status = "disabled";
-			perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
 		};
 
 		pcie1: pci@1b700000 {
@@ -522,8 +1140,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000   /* downstream I/O */
-				  0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -556,7 +1174,7 @@
 			pinctrl-names = "default";
 
 			status = "disabled";
-			perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
 		};
 
 		pcie2: pci@1b900000 {
@@ -573,8 +1191,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000   /* downstream I/O */
-				  0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000   /* I/O */
+				  0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */
 
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -607,12 +1225,7 @@
 			pinctrl-names = "default";
 
 			status = "disabled";
-			perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
-		};
-
-		nss_common: syscon@03000000 {
-			compatible = "syscon";
-			reg = <0x03000000 0x0000FFFF>;
+			perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
 		};
 
 		qsgmii_csr: syscon@1bb00000 {
@@ -620,22 +1233,60 @@
 			reg = <0x1bb00000 0x000001FF>;
 		};
 
-		stmmac_axi_setup: stmmac-axi-config {
-			snps,wr_osr_lmt = <7>;
-			snps,rd_osr_lmt = <7>;
-			snps,blen = <16 0 0 0 0 0 0>;
+		lcc: clock-controller@28000000 {
+			compatible = "qcom,lcc-ipq8064";
+			reg = <0x28000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		lpass@28100000 {
+			compatible = "qcom,lpass-cpu";
+			status = "disabled";
+			clocks = <&lcc AHBIX_CLK>,
+					<&lcc MI2S_OSR_CLK>,
+					<&lcc MI2S_BIT_CLK>;
+			clock-names = "ahbix-clk",
+					"mi2s-osr-clk",
+					"mi2s-bit-clk";
+			interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "lpass-irq-lpaif";
+			reg = <0x28100000 0x10000>;
+			reg-names = "lpass-lpaif";
+		};
+
+		sata: sata@29000000 {
+			compatible = "qcom,ipq806x-ahci", "generic-ahci";
+			reg = <0x29000000 0x180>;
+
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc SFAB_SATA_S_H_CLK>,
+				 <&gcc SATA_H_CLK>,
+				 <&gcc SATA_A_CLK>,
+				 <&gcc SATA_RXOOB_CLK>,
+				 <&gcc SATA_PMALIVE_CLK>;
+			clock-names = "slave_face", "iface", "core",
+					"rxoob", "pmalive";
+
+			assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
+			assigned-clock-rates = <100000000>, <100000000>;
+
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			status = "disabled";
 		};
 
 		gmac0: ethernet@37000000 {
 			device_type = "network";
-			compatible = "qcom,ipq806x-gmac";
+			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
 			reg = <0x37000000 0x200000>;
 			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 
 			snps,axi-config = <&stmmac_axi_setup>;
 			snps,pbl = <32>;
-			snps,aal = <1>;
+			snps,aal;
 
 			qcom,nss-common = <&nss_common>;
 			qcom,qsgmii-csr = <&qsgmii_csr>;
@@ -643,22 +1294,23 @@
 			clocks = <&gcc GMAC_CORE1_CLK>;
 			clock-names = "stmmaceth";
 
-			resets = <&gcc GMAC_CORE1_RESET>;
-			reset-names = "stmmaceth";
+			resets = <&gcc GMAC_CORE1_RESET>,
+				 <&gcc GMAC_AHB_RESET>;
+			reset-names = "stmmaceth", "ahb";
 
 			status = "disabled";
 		};
 
 		gmac1: ethernet@37200000 {
 			device_type = "network";
-			compatible = "qcom,ipq806x-gmac";
+			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
 			reg = <0x37200000 0x200000>;
 			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 
 			snps,axi-config = <&stmmac_axi_setup>;
 			snps,pbl = <32>;
-			snps,aal = <1>;
+			snps,aal;
 
 			qcom,nss-common = <&nss_common>;
 			qcom,qsgmii-csr = <&qsgmii_csr>;
@@ -666,22 +1318,23 @@
 			clocks = <&gcc GMAC_CORE2_CLK>;
 			clock-names = "stmmaceth";
 
-			resets = <&gcc GMAC_CORE2_RESET>;
-			reset-names = "stmmaceth";
+			resets = <&gcc GMAC_CORE2_RESET>,
+				 <&gcc GMAC_AHB_RESET>;
+			reset-names = "stmmaceth", "ahb";
 
 			status = "disabled";
 		};
 
 		gmac2: ethernet@37400000 {
 			device_type = "network";
-			compatible = "qcom,ipq806x-gmac";
+			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
 			reg = <0x37400000 0x200000>;
 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 
 			snps,axi-config = <&stmmac_axi_setup>;
 			snps,pbl = <32>;
-			snps,aal = <1>;
+			snps,aal;
 
 			qcom,nss-common = <&nss_common>;
 			qcom,qsgmii-csr = <&qsgmii_csr>;
@@ -689,22 +1342,23 @@
 			clocks = <&gcc GMAC_CORE3_CLK>;
 			clock-names = "stmmaceth";
 
-			resets = <&gcc GMAC_CORE3_RESET>;
-			reset-names = "stmmaceth";
+			resets = <&gcc GMAC_CORE3_RESET>,
+				 <&gcc GMAC_AHB_RESET>;
+			reset-names = "stmmaceth", "ahb";
 
 			status = "disabled";
 		};
 
 		gmac3: ethernet@37600000 {
 			device_type = "network";
-			compatible = "qcom,ipq806x-gmac";
+			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
 			reg = <0x37600000 0x200000>;
 			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 
 			snps,axi-config = <&stmmac_axi_setup>;
 			snps,pbl = <32>;
-			snps,aal = <1>;
+			snps,aal;
 
 			qcom,nss-common = <&nss_common>;
 			qcom,qsgmii-csr = <&qsgmii_csr>;
@@ -712,85 +1366,11 @@
 			clocks = <&gcc GMAC_CORE4_CLK>;
 			clock-names = "stmmaceth";
 
-			resets = <&gcc GMAC_CORE4_RESET>;
-			reset-names = "stmmaceth";
+			resets = <&gcc GMAC_CORE4_RESET>,
+				 <&gcc GMAC_AHB_RESET>;
+			reset-names = "stmmaceth", "ahb";
 
 			status = "disabled";
 		};
-
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		sdcc1bam: dma@12402000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12402000 0x8000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		sdcc3bam: dma@12182000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12182000 0x8000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC3_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		amba: amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			sdcc1: sdcc@12400000 {
-				status          = "disabled";
-				compatible      = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg             = <0x12400000 0x2000>;
-				interrupts      = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks          = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names     = "mclk", "apb_pclk";
-				bus-width       = <8>;
-				max-frequency   = <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				mmc-ddr-1_8v;
-				vmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-			};
-
-			sdcc3: sdcc@12180000 {
-				compatible      = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status          = "disabled";
-				reg             = <0x12180000 0x2000>;
-				interrupts      = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks          = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names     = "mclk", "apb_pclk";
-				bus-width       = <8>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency   = <192000000>;
-				sd-uhs-sdr104;
-				sd-uhs-ddr50;
-				vqmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-				dma-names = "tx", "rx";
-			};
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi
new file mode 100644
index 000000000000..803e6ff99ef8
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8065.dtsi"
+
+&rpm {
+	smb208_regulators: regulators {
+		compatible = "qcom,rpm-smb208-regulators";
+
+		smb208_s1a: s1a {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s1b: s1b {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2a: s2a {
+			regulator-min-microvolt = <775000>;
+			regulator-max-microvolt = <1275000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2b: s2b {
+			regulator-min-microvolt = <775000>;
+			regulator-max-microvolt = <1275000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8065.dtsi b/arch/arm/boot/dts/qcom-ipq8065.dtsi
new file mode 100644
index 000000000000..ea49f6cc416d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8065";
+	compatible = "qcom,ipq8065", "qcom,ipq8064";
+};
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
index 942e3a2cac35..a8304769b509 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
  * Device Tree Source for mangOH Green Board with WP8548 Module
  *
  * Copyright (C) 2016 BayLibre, SAS.
  * Author : Neil Armstrong <narmstrong@baylibre.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/input/input.h>
@@ -82,8 +45,8 @@
 	 * - 42: IOT0_GPIO1 and SD Card Detect
 	 */
 
-	gpioext1_pins: gpioext1_pins {
-		pins {
+	gpioext1_pins: gpioext1-state {
+		gpioext1-pins {
 			pins = "gpio2";
 			function = "gpio";
 			input-enable;
@@ -91,8 +54,8 @@
 		};
 	};
 
-	sdc_cd_pins: sdc_cd_pins {
-		pins {
+	sdc_cd_pins: sdc-cd-state {
+		sdc-cd-pins {
 			pins = "gpio42";
 			function = "gpio";
 			drive-strength = <2>;
@@ -103,7 +66,7 @@
 
 &gsbi3_spi {
 	spi@0 {
-		compatible = "swir,mangoh-iotport-spi", "spidev";
+		compatible = "swir,mangoh-iotport-spi";
 		spi-max-frequency = <24000000>;
 		reg = <0>;
 	};
@@ -153,7 +116,7 @@
 			#size-cells = <0>;
 			reg = <4>;
 
-			gpioext0: gpio@3e {
+			gpioext0: pinctrl@3e {
 				/* GPIO Expander 0 Mapping :
 				 * - 0: ARDUINO_RESET_Level shift
 				 * - 1: BattChrgr_PG_N
@@ -179,7 +142,7 @@
 				interrupt-parent = <&gpioext1>;
 				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 
-				probe-reset;
+				semtech,probe-reset;
 
 				gpio-controller;
 				interrupt-controller;
@@ -191,7 +154,7 @@
 			#size-cells = <0>;
 			reg = <5>;
 
-			gpioext1: gpio@3f {
+			gpioext1: pinctrl@3f {
 				/* GPIO Expander 1 Mapping :
 				 * - 0: GPIOEXP_INT1
 				 * - 1: Battery detect
@@ -220,7 +183,7 @@
 				interrupt-parent = <&msmgpio>;
 				interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 
-				probe-reset;
+				semtech,probe-reset;
 
 				gpio-controller;
 				interrupt-controller;
@@ -232,7 +195,7 @@
 			#size-cells = <0>;
 			reg = <6>;
 
-			gpioext2: gpio@70 {
+			gpioext2: pinctrl@70 {
 				/* GPIO Expander 2 Mapping :
 				 * - 0: USB_HUB_INTn
 				 * - 1: HUB_CONNECT
@@ -258,7 +221,7 @@
 				interrupt-parent = <&gpioext1>;
 				interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
 
-				probe-reset;
+				semtech,probe-reset;
 
 				gpio-controller;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
index a725b73b5a2e..92c8003dac25 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
  * Device Tree Source for Sierra Wireless WP8548 Module
  *
  * Copyright (C) 2016 BayLibre, SAS.
  * Author : Neil Armstrong <narmstrong@baylibre.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "qcom-mdm9615.dtsi"
@@ -49,7 +12,7 @@
 	model = "Sierra Wireless WP8548 Module";
 	compatible = "swir,wp8548", "qcom,mdm9615";
 
-	memory {
+	memory@48000000 {
 		device_type = "memory";
 		reg = <0x48000000 0x7F00000>;
 	};
@@ -59,8 +22,8 @@
 	pinctrl-0 = <&reset_out_pins>;
 	pinctrl-names = "default";
 
-	gsbi3_pins: gsbi3_pins {
-		mux {
+	gsbi3_pins: gsbi3-state {
+		gsbi3-pins {
 			pins = "gpio8", "gpio9", "gpio10", "gpio11";
 			function = "gsbi3";
 			drive-strength = <8>;
@@ -68,8 +31,8 @@
 		};
 	};
 
-	gsbi4_pins: gsbi4_pins {
-		mux {
+	gsbi4_pins: gsbi4-state {
+		gsbi4-pins {
 			pins = "gpio12", "gpio13", "gpio14", "gpio15";
 			function = "gsbi4";
 			drive-strength = <8>;
@@ -77,15 +40,15 @@
 		};
 	};
 
-	gsbi5_i2c_pins: gsbi5_i2c_pins {
-		pin16 {
+	gsbi5_i2c_pins: gsbi5-i2c-state {
+		sda-pins {
 			pins = "gpio16";
 			function = "gsbi5_i2c";
 			drive-strength = <8>;
 			bias-disable;
 		};
 
-		pin17 {
+		scl-pins {
 			pins = "gpio17";
 			function = "gsbi5_i2c";
 			drive-strength = <2>;
@@ -93,8 +56,8 @@
 		};
 	};
 
-	gsbi5_uart_pins: gsbi5_uart_pins {
-		mux {
+	gsbi5_uart_pins: gsbi5-uart-state {
+		gsbi5-uart-pins {
 			pins = "gpio18", "gpio19";
 			function = "gsbi5_uart";
 			drive-strength = <8>;
@@ -102,8 +65,8 @@
 		};
 	};
 
-	reset_out_pins: reset_out_pins {
-		pins {
+	reset_out_pins: reset-out-state {
+		reset-out-pins {
 			pins = "gpio66";
 			function = "gpio";
 			drive-strength = <2>;
@@ -114,7 +77,7 @@
 };
 
 &pmicgpio {
-	usb_vbus_5v_pins: usb_vbus_5v_pins {
+	usb_vbus_5v_pins: usb-vbus-5v-state {
 		pins = "gpio4";
 		function = "normal";
 		output-high;
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index dda2ceec6591..b40c52ddf9b4 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
 /*
  * Device Tree Source for Qualcomm MDM9615 SoC
  *
  * Copyright (C) 2016 BayLibre, SAS.
  * Author : Neil Armstrong <narmstrong@baylibre.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -64,6 +27,7 @@
 
 		cpu0: cpu@0 {
 			compatible = "arm,cortex-a5";
+			reg = <0>;
 			device_type = "cpu";
 			next-level-cache = <&L2>;
 		};
@@ -115,13 +79,13 @@
 		};
 
 		timer@200a000 {
-			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			compatible = "qcom,kpss-wdt-mdm9615", "qcom,kpss-timer",
+				     "qcom,msm-timer";
 			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
 				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>,
 				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
 			reg = <0x0200a000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
+			clock-frequency = <27000000>;
 			cpu-offset = <0x80000>;
 		};
 
@@ -139,6 +103,7 @@
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-mdm9615";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
 		};
@@ -151,7 +116,7 @@
 		};
 
 		l2cc: clock-controller@2011000 {
-			compatible = "syscon";
+			compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon";
 			reg = <0x02011000 0x1000>;
 		};
 
@@ -205,7 +170,6 @@
 				#size-cells = <0>;
 				reg = <0x16280000 0x1000>;
 				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
-				spi-max-frequency = <24000000>;
 
 				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
 				clock-names = "core", "iface";
@@ -282,7 +246,7 @@
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pmicintc: pmic@0 {
+			pmicintc: pmic {
 				compatible = "qcom,pm8018", "qcom,pm8921";
 				interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <2>;
@@ -300,18 +264,14 @@
 					pull-up;
 				};
 
-				pmicmpp: mpp@50 {
+				pmicmpp: mpps@50 {
 					compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
-					interrupt-parent = <&pmicintc>;
-					interrupts = <24 IRQ_TYPE_NONE>,
-						     <25 IRQ_TYPE_NONE>,
-						     <26 IRQ_TYPE_NONE>,
-						     <27 IRQ_TYPE_NONE>,
-						     <28 IRQ_TYPE_NONE>,
-						     <29 IRQ_TYPE_NONE>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
 					reg = <0x50>;
 					gpio-controller;
 					#gpio-cells = <2>;
+					gpio-ranges = <&pmicmpp 0 0 6>;
 				};
 
 				rtc@11d {
@@ -324,6 +284,7 @@
 
 				pmicgpio: gpio@150 {
 					compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio";
+					reg = <0x150>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
 					gpio-controller;
@@ -333,7 +294,7 @@
 			};
 		};
 
-		sdcc1bam: dma@12182000{
+		sdcc1bam: dma-controller@12182000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12182000 0x8000>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -343,7 +304,7 @@
 			qcom,ee = <0>;
 		};
 
-		sdcc2bam: dma@12142000{
+		sdcc2bam: dma-controller@12142000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12142000 0x8000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -353,51 +314,43 @@
 			qcom,ee = <0>;
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: sdcc@12180000 {
-				status = "disabled";
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg = <0x12180000 0x2000>;
-				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <8>;
-				max-frequency = <48000000>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-				assigned-clocks = <&gcc SDC1_CLK>;
-				assigned-clock-rates = <400000>;
-			};
+		sdcc1: mmc@12180000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12180000 0x2000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <48000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+			dma-names = "tx", "rx";
+			assigned-clocks = <&gcc SDC1_CLK>;
+			assigned-clock-rates = <400000>;
+		};
 
-			sdcc2: sdcc@12140000 {
-				compatible = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status = "disabled";
-				reg = <0x12140000 0x2000>;
-				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
-				clock-names = "mclk", "apb_pclk";
-				bus-width = <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency = <48000000>;
-				no-1-8-v;
-				vmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
-				dma-names = "tx", "rx";
-				assigned-clocks = <&gcc SDC2_CLK>;
-				assigned-clock-rates = <400000>;
-			};
+		sdcc2: mmc@12140000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12140000 0x2000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <48000000>;
+			no-1-8-v;
+			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc2bam 2>, <&sdcc2bam 1>;
+			dma-names = "tx", "rx";
+			assigned-clocks = <&gcc SDC2_CLK>;
+			assigned-clock-rates = <400000>;
 		};
 
 		tcsr: syscon@1a400000 {
@@ -414,7 +367,7 @@
 			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names	= "ack", "err", "wakeup";
+			interrupt-names = "ack", "err", "wakeup";
 
 			regulators {
 				compatible = "qcom,rpm-pm8018-regulators";
diff --git a/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
new file mode 100644
index 000000000000..288cacd5d1fa
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8226-samsung-s3ve3g.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "qcom-msm8226.dtsi"
+
+/ {
+	model = "Samsung Galaxy S III Neo";
+	compatible = "samsung,s3ve3g", "qcom,msm8226";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
new file mode 100644
index 000000000000..42acb9ddb8cc
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -0,0 +1,652 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,gcc-msm8974.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	chosen { };
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0>;
+	};
+
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8226", "qcom,scm";
+			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_region: smem@3000000 {
+			reg = <0x3000000 0x100000>;
+			no-map;
+		};
+
+		adsp_region: adsp@dc00000 {
+			reg = <0x0dc00000 0x1900000>;
+			no-map;
+		};
+	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8226";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8226", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8226-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+
+		memory-region = <&smem_region>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apcs: syscon@f9011000 {
+			compatible = "syscon";
+			reg = <0xf9011000 0x1000>;
+		};
+
+		sdhc_1: mmc@f9824900 {
+			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc1_default_state>;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@f98a4900 {
+			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc2_default_state>;
+			status = "disabled";
+		};
+
+		sdhc_3: mmc@f9864900 {
+			compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
+				 <&gcc GCC_SDCC3_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc3_default_state>;
+			status = "disabled";
+		};
+
+		blsp1_uart1: serial@f991d000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991d000 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart3: serial@f991f000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991f000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart4: serial@f9920000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf9920000 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@f9923000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9923000 0x1000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c1_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c2: i2c@f9924000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9924000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c2_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c3: i2c@f9925000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9925000 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c3_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c4: i2c@f9926000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9926000 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c4_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c5: i2c@f9927000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9927000 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c5_pins>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		cci: cci@fda0c000 {
+			compatible = "qcom,msm8226-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfda0c000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci_default>;
+			pinctrl-1 = <&cci_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		usb: usb@f9a55000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0xf9a55000 0x200>,
+			      <0xf9a55200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <75000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs_phy: phy {
+					compatible = "qcom,usb-hs-phy-msm8226",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+					reset-names = "phy", "por";
+					qcom,init-seq = /bits/ 8 <0x0 0x44
+						0x1 0x68 0x2 0x24 0x3 0x13>;
+				};
+			};
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8226";
+			reg = <0xfc400000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>;
+			clock-names = "xo",
+				      "sleep_clk";
+		};
+
+		mmcc: clock-controller@fd8c0000 {
+			compatible = "qcom,mmcc-msm8226";
+			reg = <0xfd8c0000 0x6000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8226-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 117>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			blsp1_i2c1_pins: blsp1-i2c1-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_pins: blsp1-i2c2-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_pins: blsp1-i2c3-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_pins: blsp1-i2c4-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c5_pins: blsp1-i2c5-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cci_default: cci-default-state {
+				pins = "gpio29", "gpio30";
+				function = "cci_i2c0";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cci_sleep: cci-sleep-state {
+				pins = "gpio29", "gpio30";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdhc1_default_state: sdhc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				cmd-data-pins {
+					pins = "sdc1_cmd", "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdhc2_default_state: sdhc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				cmd-data-pins {
+					pins = "sdc2_cmd", "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdhc3_default_state: sdhc3-default-state {
+				clk-pins {
+					pins = "gpio44";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "gpio43";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "gpio39", "gpio40", "gpio41", "gpio42";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		spmi_bus: spmi@fc4cf000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg-names = "core", "intr", "cnfg";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		rng@f9bff000 {
+			compatible = "qcom,prng";
+			reg = <0xf9bff000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		timer@f9020000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		rpm_msg_ram: sram@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
+
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
+			reg = <0xfd484000 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		adsp: remoteproc@fe200000 {
+			compatible = "qcom,msm8226-adsp-pil";
+			reg = <0xfe200000 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8226_VDDCX>;
+			power-domain-names = "cx";
+
+			clocks = <&xo_board>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_region>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			smd-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 8>;
+				qcom,smd-edge = <1>;
+
+				label = "lpass";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 2
+				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3
+				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4
+				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1
+				(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index 6a321ccb0bd0..be18f1be29a1 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -15,38 +15,23 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	soc {
-		gsbi@19c00000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@19c40000 {
-				status = "okay";
-			};
-		};
-
-		/* Temporary fixed regulator */
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
+	/* Temporary fixed regulator */
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
+	};
+};
 
-		amba {
-			/* eMMC */
-			sdcc1: sdcc@12400000 {
-				status = "okay";
-				vmmc-supply = <&vsdcc_fixed>;
-			};
+&gsbi12 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
 
-			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
-				status = "okay";
-				vmmc-supply = <&vsdcc_fixed>;
-			};
-		};
-	};
+&gsbi12_serial {
+	status = "okay";
 };
 
 &pm8058 {
@@ -76,3 +61,15 @@
 		keypad,num-columns = <5>;
 	};
 };
+
+/* eMMC */
+&sdcc1 {
+	vmmc-supply = <&vsdcc_fixed>;
+	status = "okay";
+};
+
+/* External micro SD card */
+&sdcc3 {
+	vmmc-supply = <&vsdcc_fixed>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 480fc08cbe8e..f601b40ebcf4 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -50,22 +50,25 @@
 	};
 
 	clocks {
-		cxo_board {
+		cxo_board: cxo-board-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
+			clock-output-names = "cxo_board";
 		};
 
-		pxo_board {
+		pxo_board: pxo-board-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <27000000>;
+			clock-output-names = "pxo_board";
 		};
 
-		sleep_clk {
+		sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
+			clock-output-names = "sleep_clk";
 		};
 	};
 
@@ -126,8 +129,62 @@
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-msm8660";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
+			clocks = <&pxo_board>, <&cxo_board>;
+			clock-names = "pxo", "cxo";
+		};
+
+		gsbi1: gsbi@16000000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x16000000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			status = "disabled";
+
+			gsbi1_spi: spi@16080000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x16080000 0x1000>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gsbi3: gsbi@16200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <12>;
+			reg = <0x16200000 0x100>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+			status = "disabled";
+
+			gsbi3_i2c: i2c@16280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16280000 0x1000>;
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		gsbi6: gsbi@16500000 {
@@ -211,6 +268,7 @@
 			ranges;
 
 			syscon-tcsr = <&tcsr>;
+			status = "disabled";
 
 			gsbi8_i2c: i2c@19880000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
@@ -258,7 +316,7 @@
 			};
 		};
 
-		external-bus@1a100000 {
+		ebi2: external-bus@1a100000 {
 			compatible = "qcom,msm8660-ebi2";
 			#address-cells = <2>;
 			#size-cells = <1>;
@@ -275,12 +333,12 @@
 			status = "disabled";
 		};
 
-		qcom,ssbi@500000 {
+		ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pm8058: pmic@0 {
+			pm8058: pmic {
 				compatible = "qcom,pm8058";
 				interrupt-parent = <&tlmm>;
 				interrupts = <88 8>;
@@ -307,20 +365,9 @@
 					reg = <0x50>;
 					gpio-controller;
 					#gpio-cells = <2>;
-					interrupt-parent = <&pm8058>;
-					interrupts =
-					<128 IRQ_TYPE_NONE>,
-					<129 IRQ_TYPE_NONE>,
-					<130 IRQ_TYPE_NONE>,
-					<131 IRQ_TYPE_NONE>,
-					<132 IRQ_TYPE_NONE>,
-					<133 IRQ_TYPE_NONE>,
-					<134 IRQ_TYPE_NONE>,
-					<135 IRQ_TYPE_NONE>,
-					<136 IRQ_TYPE_NONE>,
-					<137 IRQ_TYPE_NONE>,
-					<138 IRQ_TYPE_NONE>,
-					<139 IRQ_TYPE_NONE>;
+					gpio-ranges = <&pm8058_mpps 0 0 12>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
 				};
 
 				pwrkey@1c {
@@ -332,7 +379,7 @@
 					pull-up;
 				};
 
-				keypad@148 {
+				pm8058_keypad: keypad@148 {
 					compatible = "qcom,pm8058-keypad";
 					reg = <0x148>;
 					interrupt-parent = <&pm8058>;
@@ -397,32 +444,59 @@
 					compatible = "qcom,pm8058-vib";
 					reg = <0x4a>;
 				};
+
+				pm8058_led48: led@48 {
+					compatible = "qcom,pm8058-keypad-led";
+					reg = <0x48>;
+					status = "disabled";
+				};
+
+				pm8058_led131: led@131 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x131>;
+					status = "disabled";
+				};
+
+				pm8058_led132: led@132 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x132>;
+					status = "disabled";
+				};
+
+				pm8058_led133: led@133 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x133>;
+					status = "disabled";
+				};
+
 			};
 		};
 
 		l2cc: clock-controller@2082000 {
-			compatible	= "syscon";
-			reg		= <0x02082000 0x1000>;
+			compatible = "qcom,kpss-gcc-msm8660", "qcom,kpss-gcc", "syscon";
+			reg = <0x02082000 0x1000>;
 		};
 
 		rpm: rpm@104000 {
-			compatible	= "qcom,rpm-msm8660";
-			reg		= <0x00104000 0x1000>;
-			qcom,ipc	= <&l2cc 0x8 2>;
-
-			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
-					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names	= "ack", "err", "wakeup";
+			compatible = "qcom,rpm-msm8660";
+			reg = <0x00104000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
+
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack", "err", "wakeup";
 			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
 			clock-names = "ram";
 
 			rpmcc: clock-controller {
-				compatible	= "qcom,rpmcc-msm8660", "qcom,rpmcc";
+				compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
 				#clock-cells = <1>;
+				clocks = <&pxo_board>;
+				clock-names = "pxo";
 			};
 
-			pm8901-regulators {
+			regulators-0 {
 				compatible = "qcom,rpm-pm8901-regulators";
 
 				pm8901_l0: l0 {};
@@ -446,7 +520,7 @@
 				pm8901_mvs: mvs {};
 			};
 
-			pm8058-regulators {
+			regulators-1 {
 				compatible = "qcom,rpm-pm8058-regulators";
 
 				pm8058_l0: l0 {};
@@ -494,81 +568,76 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			sdcc1: sdcc@12400000 {
-				status		= "disabled";
-				compatible	= "arm,pl18x", "arm,primecell";
+			sdcc1: mmc@12400000 {
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
-				reg		= <0x12400000 0x8000>;
-				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <8>;
-				max-frequency	= <48000000>;
+				reg = <0x12400000 0x8000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <48000000>;
 				non-removable;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
 			};
 
-			sdcc2: sdcc@12140000 {
-				status		= "disabled";
-				compatible	= "arm,pl18x", "arm,primecell";
+			sdcc2: mmc@12140000 {
+				status = "disabled";
+				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
-				reg		= <0x12140000 0x8000>;
-				interrupts	= <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <8>;
-				max-frequency	= <48000000>;
+				reg = <0x12140000 0x8000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <8>;
+				max-frequency = <48000000>;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
 			};
 
-			sdcc3: sdcc@12180000 {
-				compatible	= "arm,pl18x", "arm,primecell";
+			sdcc3: mmc@12180000 {
+				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
-				status		= "disabled";
-				reg		= <0x12180000 0x8000>;
-				interrupts	= <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <4>;
+				status = "disabled";
+				reg = <0x12180000 0x8000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
-				max-frequency	= <48000000>;
+				max-frequency = <48000000>;
 				no-1-8-v;
 			};
 
-			sdcc4: sdcc@121c0000 {
-				compatible	= "arm,pl18x", "arm,primecell";
+			sdcc4: mmc@121c0000 {
+				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
-				status		= "disabled";
-				reg		= <0x121c0000 0x8000>;
-				interrupts	= <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <4>;
-				max-frequency	= <48000000>;
+				status = "disabled";
+				reg = <0x121c0000 0x8000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
+				max-frequency = <48000000>;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
 			};
 
-			sdcc5: sdcc@12200000 {
-				compatible	= "arm,pl18x", "arm,primecell";
+			sdcc5: mmc@12200000 {
+				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
-				status		= "disabled";
-				reg		= <0x12200000 0x8000>;
-				interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <4>;
+				status = "disabled";
+				reg = <0x12200000 0x8000>;
+				interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
+				clock-names = "mclk", "apb_pclk";
+				bus-width = <4>;
 				cap-sd-highspeed;
 				cap-mmc-highspeed;
-				max-frequency	= <48000000>;
+				max-frequency = <48000000>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts
new file mode 100644
index 000000000000..c8d34de8a71e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/msm8916-samsung-e5.dts"
+#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts
new file mode 100644
index 000000000000..85be286c8608
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/msm8916-samsung-e7.dts"
+#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts
new file mode 100644
index 000000000000..d3abe0536238
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/msm8916-samsung-grandmax.dts"
+#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts
new file mode 100644
index 000000000000..dee2c20af355
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/msm8916-samsung-serranove.dts"
+#include "qcom-msm8916-smp.dtsi"
diff --git a/arch/arm/boot/dts/qcom-msm8916-smp.dtsi b/arch/arm/boot/dts/qcom-msm8916-smp.dtsi
new file mode 100644
index 000000000000..36328dbe4212
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8916-smp.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/ {
+	cpus {
+		cpu@0 {
+			enable-method = "qcom,msm8916-smp";
+		};
+		cpu@1 {
+			enable-method = "qcom,msm8916-smp";
+		};
+		cpu@2 {
+			enable-method = "qcom,msm8916-smp";
+		};
+		cpu@3 {
+			enable-method = "qcom,msm8916-smp";
+		};
+
+		idle-states {
+			/delete-property/ entry-method;
+		};
+	};
+
+	psci {
+		status = "disabled";
+	};
+};
+
+&CPU_SLEEP_0 {
+	compatible = "qcom,idle-state-spc";
+};
+
+&cpu0_acc {
+	status = "okay";
+};
+
+&cpu0_saw {
+	status = "okay";
+};
+
+&cpu1_acc {
+	status = "okay";
+};
+
+&cpu1_saw {
+	status = "okay";
+};
+
+&cpu2_acc {
+	status = "okay";
+};
+
+&cpu2_saw {
+	status = "okay";
+};
+
+&cpu3_acc {
+	status = "okay";
+};
+
+&cpu3_saw {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index e7d2e937ea4c..8fa2befa629a 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -15,322 +15,10 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	soc {
-		gsbi@16400000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			serial@16440000 {
-				status = "okay";
-			};
-		};
-
-		amba {
-			/* eMMC */
-			sdcc1: sdcc@12400000 {
-				status = "okay";
-			};
-
-			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
-				status = "okay";
-			};
-		};
-
-		rpm@108000 {
-			regulators {
-				compatible = "qcom,rpm-pm8921-regulators";
-				vin_lvs1_3_6-supply = <&pm8921_s4>;
-				vin_lvs2-supply = <&pm8921_s4>;
-				vin_lvs4_5_7-supply = <&pm8921_s4>;
-				vdd_ncp-supply = <&pm8921_l6>;
-				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-				vdd_l21_l23_l29-supply = <&pm8921_s8>;
-				vdd_l24-supply = <&pm8921_s1>;
-				vdd_l25-supply = <&pm8921_s1>;
-				vdd_l27-supply = <&pm8921_s7>;
-				vdd_l28-supply = <&pm8921_s7>;
-
-				/* Buck SMPS */
-				pm8921_s1: s1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				pm8921_s2: s2 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				pm8921_s3: s3 {
-					regulator-min-microvolt = <500000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <4800000>;
-					bias-pull-down;
-				};
-
-				pm8921_s4: s4 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
-				};
-
-				pm8921_s7: s7 {
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
-					qcom,switch-mode-frequency = <3200000>;
-					bias-pull-down;
-				};
-
-				pm8921_s8: s8 {
-					regulator-always-on;
-					regulator-min-microvolt = <2050000>;
-					regulator-max-microvolt = <2050000>;
-					qcom,switch-mode-frequency = <1600000>;
-					bias-pull-down;
-				};
-
-				/* PMOS LDO */
-				pm8921_l1: l1 {
-					regulator-always-on;
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					bias-pull-down;
-				};
-
-				pm8921_l2: l2 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				pm8921_l3: l3 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3075000>;
-					bias-pull-down;
-				};
-
-				pm8921_l4: l4 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8921_l5: l5 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8921_l6: l6 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8921_l7: l7 {
-					regulator-always-on;
-					regulator-min-microvolt = <1850000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8921_l8: l8 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				pm8921_l9: l9 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				pm8921_l10: l10 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					bias-pull-down;
-				};
-
-				pm8921_l11: l11 {
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					bias-pull-down;
-				};
-
-				pm8921_l12: l12 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					bias-pull-down;
-				};
-
-				pm8921_l14: l14 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8921_l15: l15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8921_l16: l16 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					bias-pull-down;
-				};
-
-				pm8921_l17: l17 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-					bias-pull-down;
-				};
-
-				pm8921_l18: l18 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-					bias-pull-down;
-				};
-
-				pm8921_l21: l21 {
-					regulator-min-microvolt = <1900000>;
-					regulator-max-microvolt = <1900000>;
-					bias-pull-down;
-				};
-
-				pm8921_l22: l22 {
-					regulator-min-microvolt = <2750000>;
-					regulator-max-microvolt = <2750000>;
-					bias-pull-down;
-				};
-
-				pm8921_l23: l23 {
-					regulator-always-on;
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					bias-pull-down;
-				};
-
-				pm8921_l24: l24 {
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1150000>;
-					bias-pull-down;
-				};
-
-				pm8921_l25: l25 {
-					regulator-always-on;
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-					bias-pull-down;
-				};
-
-				/* Low Voltage Switch */
-				pm8921_lvs1: lvs1 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs2: lvs2 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs3: lvs3 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs4: lvs4 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs5: lvs5 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs6: lvs6 {
-					bias-pull-down;
-				};
-
-				pm8921_lvs7: lvs7 {
-					bias-pull-down;
-				};
-
-				pm8921_ncp: ncp {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,switch-mode-frequency = <1600000>;
-				};
-			};
-		};
-
-		gsbi@16000000 {
-			status = "okay";
-			qcom,mode = <GSBI_PROT_SPI>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_default>;
-			spi@16080000 {
-				status = "okay";
-				eth@0 {
-					compatible = "micrel,ks8851";
-					reg = <0>;
-					interrupt-parent = <&msmgpio>;
-					interrupts = <90 8>;
-					spi-max-frequency = <5400000>;
-					vdd-supply = <&ext_l2>;
-					vdd-io-supply = <&pm8921_lvs6>;
-					reset-gpios = <&msmgpio 89 0>;
-				};
-			};
-		};
-
-		pinctrl@800000 {
-			spi1_default: spi1_default {
-				mux {
-					pins = "gpio6", "gpio7", "gpio9";
-					function = "gsbi1";
-				};
-
-				mosi {
-					pins = "gpio6";
-					drive-strength = <12>;
-					bias-disable;
-				};
-
-				miso {
-					pins = "gpio7";
-					drive-strength = <12>;
-					bias-disable;
-				};
-
-				cs {
-					pins = "gpio8";
-					drive-strength = <12>;
-					bias-disable;
-					output-low;
-				};
-
-				clk {
-					pins = "gpio9";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 
-		ext_l2: gpio-regulator@91 {
+		ext_l2: gpio-regulator {
 			compatible = "regulator-fixed";
 			regulator-name = "ext_l2";
 			gpio = <&msmgpio 91 0>;
@@ -340,6 +28,70 @@
 	};
 };
 
+&gsbi1 {
+	qcom,mode = <GSBI_PROT_SPI>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_default>;
+	status = "okay";
+};
+
+&gsbi1_spi {
+	status = "okay";
+
+	ethernet@0 {
+		compatible = "micrel,ks8851";
+		reg = <0>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <90 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <5400000>;
+		vdd-supply = <&ext_l2>;
+		vdd-io-supply = <&pm8921_lvs6>;
+		reset-gpios = <&msmgpio 89 0>;
+	};
+};
+
+&gsbi5 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi5_serial {
+	status = "okay";
+};
+
+&msmgpio {
+	spi1_default: spi1-default-state {
+		 mosi-pins {
+			pins = "gpio6";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+		 };
+
+		 miso-pins {
+			pins = "gpio7";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+		 };
+
+		 cs-pins {
+			pins = "gpio8";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+			output-low;
+		 };
+
+		 clk-pins {
+			pins = "gpio9";
+			function = "gsbi1";
+			drive-strength = <12>;
+			bias-disable;
+		 };
+	};
+};
+
 &pmicintc {
 	keypad@148 {
 		linux,keymap = <
@@ -352,3 +104,249 @@
 		keypad,num-columns = <5>;
 	};
 };
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s4>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+		vdd_ncp-supply = <&pm8921_l6>;
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l21_l23_l29-supply = <&pm8921_s8>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+
+		/* Buck SMPS */
+		pm8921_s1: s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s2: s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8921_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		pm8921_s4: s4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		pm8921_s7: s7 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s8: s8 {
+			regulator-always-on;
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* PMOS LDO */
+		pm8921_l1: l1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8921_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l3: l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
+
+		pm8921_l4: l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l5: l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l6: l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l7: l7 {
+			regulator-always-on;
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l8: l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l10: l10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l11: l11 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8921_l12: l12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l16: l16 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l17: l17 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l18: l18 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			bias-pull-down;
+		};
+
+		pm8921_l21: l21 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8921_l22: l22 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+			bias-pull-down;
+		};
+
+		pm8921_l23: l23 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l24: l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8921_l25: l25 {
+			regulator-always-on;
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs2: lvs2 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs3: lvs3 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs4: lvs4 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs5: lvs5 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs7: lvs7 {
+			bias-pull-down;
+		};
+
+		pm8921_ncp: ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+/* eMMC */
+&sdcc1 {
+	status = "okay";
+};
+
+/* External micro SD card */
+&sdcc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 172ea3c70eac..2a668cd535cc 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -3,6 +3,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/clock/qcom,lcc-msm8960.h>
 #include <dt-bindings/mfd/qcom-rpm.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
 
@@ -16,7 +17,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		interrupts = <1 14 0x304>;
+		interrupts = <GIC_PPI 14 0x304>;
 
 		cpu@0 {
 			compatible = "qcom,krait";
@@ -51,19 +52,19 @@
 
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
-		interrupts = <1 10 0x304>;
+		interrupts = <GIC_PPI 10 0x304>;
 		qcom,no-pc-write;
 	};
 
 	clocks {
-		cxo_board {
+		cxo_board: cxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <19200000>;
 			clock-output-names = "cxo_board";
 		};
 
-		pxo_board {
+		pxo_board: pxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <27000000>;
@@ -78,6 +79,15 @@
 		};
 	};
 
+	/* Temporary fixed regulator */
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -93,14 +103,13 @@
 		};
 
 		timer@200a000 {
-			compatible = "qcom,kpss-timer",
-				     "qcom,kpss-wdt-msm8960", "qcom,msm-timer";
-			interrupts = <1 1 0x301>,
-				     <1 2 0x301>,
-				     <1 3 0x301>;
+			compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer",
+				     "qcom,msm-timer";
+			interrupts = <GIC_PPI 1 0x301>,
+				     <GIC_PPI 2 0x301>,
+				     <GIC_PPI 3 0x301>;
 			reg = <0x0200a000 0x100>;
-			clock-frequency = <27000000>,
-					  <32768>;
+			clock-frequency = <27000000>;
 			cpu-offset = <0x80000>;
 		};
 
@@ -109,7 +118,7 @@
 			gpio-controller;
 			gpio-ranges = <&msmgpio 0 0 152>;
 			#gpio-cells = <2>;
-			interrupts = <0 16 0x4>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			reg = <0x800000 0x4000>;
@@ -118,8 +127,13 @@
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-msm8960";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
+			clocks = <&cxo_board>,
+				 <&pxo_board>,
+				 <&lcc PLL4>;
+			clock-names = "cxo", "pxo", "pll4";
 		};
 
 		lcc: clock-controller@28000000 {
@@ -127,27 +141,63 @@
 			reg = <0x28000000 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL4_VOTE>,
+				 <0>,
+				 <0>, <0>,
+				 <0>, <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll4_vote",
+				      "mi2s_codec_clk",
+				      "codec_i2s_mic_codec_clk",
+				      "spare_i2s_mic_codec_clk",
+				      "codec_i2s_spkr_codec_clk",
+				      "spare_i2s_spkr_codec_clk",
+				      "pcm_codec_clk";
 		};
 
 		clock-controller@4000000 {
 			compatible = "qcom,mmcc-msm8960";
 			reg = <0x4000000 0x1000>;
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
+			clocks = <&pxo_board>,
+				 <&gcc PLL3>,
+				 <&gcc PLL8_VOTE>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "pxo",
+				      "pll3",
+				      "pll8_vote",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "dsi2pll",
+				      "dsi2pllbyte",
+				      "hdmipll";
 		};
 
 		l2cc: clock-controller@2011000 {
-			compatible	= "syscon";
-			reg		= <0x2011000 0x1000>;
+			compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon";
+			reg = <0x2011000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			#clock-cells = <0>;
 		};
 
-		rpm@108000 {
-			compatible	= "qcom,rpm-msm8960";
-			reg		= <0x108000 0x1000>;
-			qcom,ipc	= <&l2cc 0x8 2>;
+		rpm: rpm@108000 {
+			compatible = "qcom,rpm-msm8960";
+			reg = <0x108000 0x1000>;
+			qcom,ipc = <&l2cc 0x8 2>;
 
-			interrupts	= <0 19 0>, <0 21 0>, <0 22 0>;
-			interrupt-names	= "ack", "err", "wakeup";
+			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ack", "err", "wakeup";
 
 			regulators {
 				compatible = "qcom,rpm-pm8921-regulators";
@@ -157,11 +207,19 @@
 		acc0: clock-controller@2088000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu0_aux";
+			#clock-cells = <0>;
 		};
 
 		acc1: clock-controller@2098000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			clock-output-names = "acpu1_aux";
+			#clock-cells = <0>;
 		};
 
 		saw0: regulator@2089000 {
@@ -192,22 +250,22 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16440000 0x1000>,
 				      <0x16400000 0x1000>;
-				interrupts = <0 154 0x0>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
 			};
 		};
 
-		qcom,ssbi@500000 {
+		ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
 
-			pmicintc: pmic@0 {
+			pmicintc: pmic {
 				compatible = "qcom,pm8921";
 				interrupt-parent = <&msmgpio>;
-				interrupts = <104 8>;
+				interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				#address-cells = <1>;
@@ -217,7 +275,8 @@
 					compatible = "qcom,pm8921-pwrkey";
 					reg = <0x1c>;
 					interrupt-parent = <&pmicintc>;
-					interrupts = <50 1>, <51 1>;
+					interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+						     <51 IRQ_TYPE_EDGE_RISING>;
 					debounce = <15625>;
 					pull-up;
 				};
@@ -226,7 +285,8 @@
 					compatible = "qcom,pm8921-keypad";
 					reg = <0x148>;
 					interrupt-parent = <&pmicintc>;
-					interrupts = <74 1>, <75 1>;
+					interrupts = <74 IRQ_TYPE_EDGE_RISING>,
+						     <75 IRQ_TYPE_EDGE_RISING>;
 					debounce = <15>;
 					scan-delay = <32>;
 					row-hold = <91500>;
@@ -235,7 +295,7 @@
 				rtc@11d {
 					compatible = "qcom,pm8921-rtc";
 					interrupt-parent = <&pmicintc>;
-					interrupts = <39 1>;
+					interrupts = <39 IRQ_TYPE_EDGE_RISING>;
 					reg = <0x11d>;
 					allow-set-time;
 				};
@@ -249,53 +309,36 @@
 			clock-names = "core";
 		};
 
-		/* Temporary fixed regulator */
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
+		sdcc3: mmc@12180000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			status = "disabled";
+			reg = <0x12180000 0x8000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <192000000>;
+			no-1-8-v;
+			vmmc-supply = <&vsdcc_fixed>;
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: sdcc@12400000 {
-				status		= "disabled";
-				compatible	= "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg		= <0x12400000 0x8000>;
-				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <8>;
-				max-frequency	= <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
-			};
-
-			sdcc3: sdcc@12180000 {
-				compatible	= "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status		= "disabled";
-				reg		= <0x12180000 0x8000>;
-				interrupts	= <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "cmd_irq";
-				clocks		= <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names	= "mclk", "apb_pclk";
-				bus-width	= <4>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency	= <192000000>;
-				no-1-8-v;
-				vmmc-supply = <&vsdcc_fixed>;
-			};
+		sdcc1: mmc@12400000 {
+			status = "disabled";
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x00051180>;
+			reg = <0x12400000 0x8000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+			clock-names = "mclk", "apb_pclk";
+			bus-width = <8>;
+			max-frequency = <96000000>;
+			non-removable;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			vmmc-supply = <&vsdcc_fixed>;
 		};
 
 		tcsr: syscon@1a400000 {
@@ -303,7 +346,7 @@
 			reg = <0x1a400000 0x100>;
 		};
 
-		gsbi@16000000 {
+		gsbi1: gsbi@16000000 {
 			compatible = "qcom,gsbi-v1.0.0";
 			cell-index = <1>;
 			reg = <0x16000000 0x100>;
@@ -313,12 +356,12 @@
 			#size-cells = <1>;
 			ranges;
 
-			spi@16080000 {
+			gsbi1_spi: spi@16080000 {
 				compatible = "qcom,spi-qup-v1.1.1";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x16080000 0x1000>;
-				interrupts = <0 147 0>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 				spi-max-frequency = <24000000>;
 				cs-gpios = <&msmgpio 8 0>;
 
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
deleted file mode 100644
index ea15b645b229..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ /dev/null
@@ -1,410 +0,0 @@
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-
-/ {
-	model = "Fairphone 2";
-	compatible = "fairphone,fp2", "qcom,msm8974";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		input-name = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_CAMERA>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-
-		volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-
-		volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-	};
-
-	vibrator {
-		compatible = "gpio-vibrator";
-		enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
-		vcc-supply = <&pm8941_l18>;
-	};
-
-	smd {
-		rpm {
-			rpm_requests {
-				pm8841-regulators {
-					s1 {
-						regulator-min-microvolt = <675000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s2 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1050000>;
-						regulator-max-microvolt = <1050000>;
-					};
-				};
-
-				pm8941-regulators {
-					vdd_l1_l3-supply = <&pm8941_s1>;
-					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-					vdd_l4_l11-supply = <&pm8941_s1>;
-					vdd_l5_l7-supply = <&pm8941_s2>;
-					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-					vdd_l21-supply = <&vreg_boost>;
-
-					s1 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s2 {
-						regulator-min-microvolt = <2150000>;
-						regulator-max-microvolt = <2150000>;
-
-						regulator-boot-on;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l1 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l2 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l3 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l4 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l5 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l6 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l7 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l8 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l9 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l10 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l11 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1350000>;
-					};
-
-					l12 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l13 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l14 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l15 {
-						regulator-min-microvolt = <2050000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					l16 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l17 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l18 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l19 {
-						regulator-min-microvolt = <2900000>;
-						regulator-max-microvolt = <3350000>;
-					};
-
-					l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-						regulator-system-load = <200000>;
-						regulator-allow-set-load;
-					};
-
-					l21 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l22 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					l23 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					l24 {
-						regulator-min-microvolt = <3075000>;
-						regulator-max-microvolt = <3075000>;
-
-						regulator-boot-on;
-					};
-				};
-			};
-		};
-	};
-};
-
-&soc {
-	serial@f991e000 {
-		status = "okay";
-	};
-
-	remoteproc@fb21b000 {
-		status = "okay";
-
-		vddmx-supply = <&pm8841_s1>;
-		vddcx-supply = <&pm8841_s2>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wcnss_pin_a>;
-
-		smd-edge {
-			qcom,remote-pid = <4>;
-			label = "pronto";
-
-			wcnss {
-				status = "okay";
-			};
-		};
-	};
-
-	pinctrl@fd510000 {
-		sdhc1_pin_a: sdhc1-pin-active {
-			clk {
-				pins = "sdc1_clk";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc1_cmd", "sdc1_data";
-				drive-strength = <10>;
-				bias-pull-up;
-			};
-		};
-
-		sdhc2_pin_a: sdhc2-pin-active {
-			clk {
-				pins = "sdc2_clk";
-				drive-strength = <10>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc2_cmd", "sdc2_data";
-				drive-strength = <6>;
-				bias-pull-up;
-			};
-		};
-
-		wcnss_pin_a: wcnss-pin-active {
-			wlan {
-				pins =  "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
-				function = "wlan";
-
-				drive-strength = <6>;
-				bias-pull-down;
-			};
-
-			bt {
-				pins = "gpio35", "gpio43", "gpio44";
-				function = "bt";
-
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			fm {
-				pins = "gpio41", "gpio42";
-				function = "fm";
-
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-		};
-	};
-
-	sdhci@f9824900 {
-		status = "okay";
-
-		vmmc-supply = <&pm8941_l20>;
-		vqmmc-supply = <&pm8941_s3>;
-
-		bus-width = <8>;
-		non-removable;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc1_pin_a>;
-	};
-
-	sdhci@f98a4900 {
-		status = "okay";
-
-		vmmc-supply = <&pm8941_l21>;
-		vqmmc-supply = <&pm8941_l13>;
-
-		bus-width = <4>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc2_pin_a>;
-	};
-
-	usb@f9a55000 {
-		status = "okay";
-
-		phys = <&usb_hs1_phy>;
-		phy-select = <&tcsr 0xb000 0>;
-		extcon = <&smbb>, <&usb_id>;
-		vbus-supply = <&chg_otg>;
-
-		hnp-disable;
-		srp-disable;
-		adp-disable;
-
-		ulpi {
-			phy@a {
-				status = "okay";
-
-				v1p8-supply = <&pm8941_l6>;
-				v3p3-supply = <&pm8941_l24>;
-
-				extcon = <&smbb>;
-				qcom,init-seq = /bits/ 8 <0x1 0x64>;
-			};
-		};
-	};
-
-	imem@fe805000 {
-		status = "okay";
-
-		reboot-mode {
-			mode-normal	= <0x77665501>;
-			mode-bootloader	= <0x77665500>;
-			mode-recovery	= <0x77665502>;
-		};
-	};
-};
-
-&spmi_bus {
-	pm8941@0 {
-		gpios@c000 {
-			gpio_keys_pin_a: gpio-keys-active {
-				pins = "gpio1", "gpio2", "gpio5";
-				function = "normal";
-
-				bias-pull-up;
-				power-source = <PM8941_GPIO_S3>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 0cda654371ae..ab35f2d644c0 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -2,223 +2,42 @@
 #include "qcom-msm8974.dtsi"
 #include "qcom-pm8841.dtsi"
 #include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "LGE MSM 8974 HAMMERHEAD";
 	compatible = "lge,hammerhead", "qcom,msm8974";
+	chassis-type = "handset";
 
 	aliases {
 		serial0 = &blsp1_uart1;
-		serial1 = &blsp2_uart10;
+		serial1 = &blsp2_uart4;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	smd {
-		rpm {
-			rpm_requests {
-				pm8841-regulators {
-					s1 {
-						regulator-min-microvolt = <675000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s2 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1050000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s4 {
-						regulator-min-microvolt = <815000>;
-						regulator-max-microvolt = <900000>;
-					};
-				};
-
-				pm8941-regulators {
-					vdd_l1_l3-supply = <&pm8941_s1>;
-					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-					vdd_l4_l11-supply = <&pm8941_s1>;
-					vdd_l5_l7-supply = <&pm8941_s2>;
-					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-					vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
-					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-					vdd_l21-supply = <&vreg_boost>;
-
-					s1 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s2 {
-						regulator-min-microvolt = <2150000>;
-						regulator-max-microvolt = <2150000>;
-
-						regulator-boot-on;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l1 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l2 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l3 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l4 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l5 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l6 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l7 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l8 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l9 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l10 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l11 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-					};
-
-					l12 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l13 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l14 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l15 {
-						regulator-min-microvolt = <2050000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					l16 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l17 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l18 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l19 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-						regulator-system-load = <200000>;
-						regulator-allow-set-load;
-					};
-
-					l21 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l22 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					l23 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					l24 {
-						regulator-min-microvolt = <3075000>;
-						regulator-max-microvolt = <3075000>;
-
-						regulator-boot-on;
-					};
-				};
-			};
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
 		};
 	};
 
@@ -229,7 +48,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
+		gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 
 		pinctrl-names = "default";
@@ -237,522 +56,608 @@
 	};
 };
 
-&soc {
-	serial@f991d000 {
-		status = "okay";
+&blsp1_i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	charger: bq24192@6b {
+		compatible = "ti,bq24192";
+		reg = <0x6b>;
+		interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
+
+		omit-battery-class;
+
+		usb_otg_vbus: usb-otg-vbus { };
 	};
 
-	pinctrl@fd510000 {
-		sdhc1_pin_a: sdhc1-pin-active {
-			clk {
-				pins = "sdc1_clk";
-				drive-strength = <16>;
-				bias-disable;
-			};
+	fuelgauge: max17048@36 {
+		compatible = "maxim,max17048";
+		reg = <0x36>;
 
-			cmd-data {
-				pins = "sdc1_cmd", "sdc1_data";
-				drive-strength = <10>;
-				bias-pull-up;
-			};
-		};
+		maxim,double-soc;
+		maxim,rcomp = /bits/ 8 <0x4d>;
 
-		sdhc2_pin_a: sdhc2-pin-active {
-			clk {
-				pins = "sdc2_clk";
-				drive-strength = <6>;
-				bias-disable;
-			};
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
 
-			cmd-data {
-				pins = "sdc2_cmd", "sdc2_data";
-				drive-strength = <6>;
-				bias-pull-up;
-			};
-		};
+		pinctrl-names = "default";
+		pinctrl-0 = <&fuelgauge_pin>;
 
-		i2c1_pins: i2c1 {
-			mux {
-				pins = "gpio2", "gpio3";
-				function = "blsp_i2c1";
+		maxim,alert-low-soc-level = <2>;
+	};
+};
 
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
+&blsp1_i2c2 {
+	status = "okay";
+	clock-frequency = <355000>;
 
-		i2c2_pins: i2c2 {
-			mux {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
+	synaptics@70 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x70>;
 
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
+		interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8941_l22>;
+		vio-supply = <&pm8941_lvs3>;
 
-		i2c3_pins: i2c3 {
-			mux {
-				pins = "gpio10", "gpio11";
-				function = "blsp_i2c3";
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pin>;
 
-		i2c11_pins: i2c11 {
-			mux {
-				pins = "gpio83", "gpio84";
-				function = "blsp_i2c11";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-				drive-strength = <2>;
-				bias-disable;
-			};
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
 		};
 
-		i2c12_pins: i2c12 {
-			mux {
-				pins = "gpio87", "gpio88";
-				function = "blsp_i2c12";
-				drive-strength = <2>;
-				bias-disable;
-			};
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
 		};
+	};
+};
 
-		mpu6515_pin: mpu6515 {
-			irq {
-				pins = "gpio73";
-				function = "gpio";
-				bias-disable;
-				input-enable;
-			};
-		};
+&blsp1_i2c3 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	avago_apds993@39 {
+		compatible = "avago,apds9930";
+		reg = <0x39>;
+		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8941_l17>;
+		vddio-supply = <&pm8941_lvs1>;
+		led-max-microamp = <100000>;
+		amstaos,proximity-diodes = <0>;
+	};
+};
 
-		touch_pin: touch {
-			int {
-				pins = "gpio5";
-				function = "gpio";
+&blsp2_i2c5 {
+	status = "okay";
+	clock-frequency = <355000>;
 
-				drive-strength = <2>;
-				bias-disable;
-				input-enable;
-			};
+	led-controller@38 {
+		compatible = "ti,lm3630a";
+		status = "okay";
+		reg = <0x38>;
 
-			reset {
-				pins = "gpio8";
-				function = "gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-				drive-strength = <2>;
-				bias-pull-up;
-			};
+		led@0 {
+			reg = <0>;
+			led-sources = <0 1>;
+			label = "lcd-backlight";
+			default-brightness = <200>;
 		};
+	};
+};
 
-		panel_pin: panel {
-			te {
-				pins = "gpio12";
-				function = "mdp_vsync";
+&blsp2_i2c6 {
+	status = "okay";
+	clock-frequency = <100000>;
 
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
+	mpu6515@68 {
+		compatible = "invensense,mpu6515";
+		reg = <0x68>;
+		interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>;
+		vddio-supply = <&pm8941_lvs1>;
 
-		bt_pin: bt {
-			hostwake {
-				pins = "gpio42";
-				function = "gpio";
-			};
+		pinctrl-names = "default";
+		pinctrl-0 = <&mpu6515_pin>;
+
+		mount-matrix = "0", "-1", "0",
+				"-1", "0", "0",
+				"0", "0", "1";
 
-			devwake {
-				pins = "gpio62";
-				function = "gpio";
+		i2c-gate {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ak8963@f {
+				compatible = "asahi-kasei,ak8963";
+				reg = <0x0f>;
+				gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+				vid-supply = <&pm8941_lvs1>;
+				vdd-supply = <&pm8941_l17>;
 			};
 
-			shutdown {
-				pins = "gpio41";
-				function = "gpio";
+			bmp280@76 {
+				compatible = "bosch,bmp280";
+				reg = <0x76>;
+				vdda-supply = <&pm8941_lvs1>;
+				vddd-supply = <&pm8941_l17>;
 			};
 		};
+	};
+};
 
-		blsp2_uart10_pin_a: blsp2-uart10-pin-active {
-			tx {
-				pins = "gpio53";
-				function = "blsp_uart10";
+&blsp1_uart1 {
+	status = "okay";
+};
 
-				drive-strength = <2>;
-				bias-disable;
-			};
+&blsp2_uart4 {
+	status = "okay";
 
-			rx {
-				pins = "gpio54";
-				function = "blsp_uart10";
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
 
-				drive-strength = <2>;
-				bias-pull-up;
-			};
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pin>;
+
+		host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
+	};
+};
 
-			cts {
-				pins = "gpio55";
-				function = "blsp_uart10";
+&dsi0 {
+	status = "okay";
 
-				drive-strength = <2>;
-				bias-pull-up;
-			};
+	vdda-supply = <&pm8941_l2>;
+	vdd-supply = <&pm8941_lvs3>;
+	vddio-supply = <&pm8941_l12>;
+
+	panel: panel@0 {
+		reg = <0>;
+		compatible = "lg,acx467akm-7";
 
-			rts {
-				pins = "gpio56";
-				function = "blsp_uart10";
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pin>;
 
-				drive-strength = <2>;
-				bias-disable;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
 			};
 		};
 	};
+};
 
-	sdhci@f9824900 {
-		status = "okay";
+&dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
 
-		vmmc-supply = <&pm8941_l20>;
-		vqmmc-supply = <&pm8941_s3>;
+&dsi0_phy {
+	status = "okay";
 
-		bus-width = <8>;
-		non-removable;
+	vddio-supply = <&pm8941_l12>;
+};
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc1_pin_a>;
+&mdss {
+	status = "okay";
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio3";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
 	};
 
-	sdhci@f98a4900 {
-		status = "okay";
+	fuelgauge_pin: fuelgauge-int-state {
+		pins = "gpio9";
+		function = "normal";
 
-		max-frequency = <100000000>;
-		bus-width = <4>;
-		non-removable;
-		vmmc-supply = <&vreg_wlan>;
-		vqmmc-supply = <&pm8941_s3>;
+		bias-disable;
+		input-enable;
+		power-source = <PM8941_GPIO_S3>;
+	};
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc2_pin_a>;
+	wlan_sleep_clk_pin: wl-sleep-clk-state {
+		pins = "gpio16";
+		function = "func2";
+
+		output-high;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	wlan_regulator_pin: wl-reg-active-state {
+		pins = "gpio17";
+		function = "normal";
+
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	otg {
+		gpio-hog;
+		gpios = <35 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "otg-gpio";
+	};
+};
+
+&pm8941_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		bcrmf@1 {
-			compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
-			reg = <1>;
+		led@7 {
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+		};
 
-			brcm,drive-strength = <10>;
+		led@6 {
+			reg = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
 
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_sleep_clk_pin>;
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
 		};
 	};
+};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-		input-name = "gpio-keys";
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+};
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
+&remoteproc_mss {
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+};
 
-		volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
 		};
 
-		volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
 		};
-	};
 
-	serial@f9960000 {
-		status = "okay";
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&blsp2_uart10_pin_a>;
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <815000>;
+			regulator-max-microvolt = <900000>;
+		};
+	};
 
-		bluetooth {
-			compatible = "brcm,bcm43438-bt";
-			max-speed = <3000000>;
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
 
-			pinctrl-names = "default";
-			pinctrl-0 = <&bt_pin>;
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
 
-			host-wakeup-gpios = <&msmgpio 42 GPIO_ACTIVE_HIGH>;
-			device-wakeup-gpios = <&msmgpio 62 GPIO_ACTIVE_HIGH>;
-			shutdown-gpios = <&msmgpio 41 GPIO_ACTIVE_HIGH>;
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
 		};
-	};
 
-	i2c@f9967000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c11_pins>;
-		clock-frequency = <355000>;
-		qcom,src-freq = <50000000>;
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
 
-		led-controller@38 {
-			compatible = "ti,lm3630a";
-			status = "okay";
-			reg = <0x38>;
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
 
-			#address-cells = <1>;
-			#size-cells = <0>;
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
 
-			led@0 {
-				reg = <0>;
-				led-sources = <0 1>;
-				label = "lcd-backlight";
-				default-brightness = <200>;
-			};
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
 		};
-	};
 
-	i2c@f9968000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c12_pins>;
-		clock-frequency = <100000>;
-		qcom,src-freq = <50000000>;
-
-		mpu6515@68 {
-			compatible = "invensense,mpu6515";
-			reg = <0x68>;
-			interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>;
-			vddio-supply = <&pm8941_lvs1>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&mpu6515_pin>;
-
-			i2c-gate {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ak8963@f {
-					compatible = "asahi-kasei,ak8963";
-					reg = <0x0f>;
-					gpios = <&msmgpio 67 0>;
-					vid-supply = <&pm8941_lvs1>;
-					vdd-supply = <&pm8941_l17>;
-				};
-
-				bmp280@76 {
-					compatible = "bosch,bmp280";
-					reg = <0x76>;
-					vdda-supply = <&pm8941_lvs1>;
-					vddd-supply = <&pm8941_l17>;
-				};
-			};
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
 		};
-	};
 
-	i2c@f9923000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_pins>;
-		clock-frequency = <100000>;
-		qcom,src-freq = <50000000>;
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
 
-		charger: bq24192@6b {
-			compatible = "ti,bq24192";
-			reg = <0x6b>;
-			interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
 
-			omit-battery-class;
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
 
-			usb_otg_vbus: usb-otg-vbus { };
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
 		};
 
-		fuelgauge: max17048@36 {
-			compatible = "maxim,max17048";
-			reg = <0x36>;
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
 
-			maxim,double-soc;
-			maxim,rcomp = /bits/ 8 <0x4d>;
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
 
-			interrupt-parent = <&msmgpio>;
-			interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
 
-			pinctrl-names = "default";
-			pinctrl-0 = <&fuelgauge_pin>;
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
 
-			maxim,alert-low-soc-level = <2>;
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
 		};
-	};
 
-	i2c@f9924000 {
-		status = "okay";
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
 
-		clock-frequency = <355000>;
-		qcom,src-freq = <50000000>;
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_pins>;
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
 
-		synaptics@70 {
-			compatible = "syna,rmi4-i2c";
-			reg = <0x70>;
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
 
-			interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>;
-			vdd-supply = <&pm8941_l22>;
-			vio-supply = <&pm8941_lvs3>;
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
 
-			pinctrl-names = "default";
-			pinctrl-0 = <&touch_pin>;
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
 
-			#address-cells = <1>;
-			#size-cells = <0>;
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
 
-			rmi4-f01@1 {
-				reg = <0x1>;
-				syna,nosleep-mode = <1>;
-			};
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
 
-			rmi4-f12@12 {
-				reg = <0x12>;
-				syna,sensor-type = <1>;
-			};
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
 		};
-	};
 
-	i2c@f9925000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_pins>;
-		clock-frequency = <100000>;
-		qcom,src-freq = <50000000>;
-
-		avago_apds993@39 {
-			compatible = "avago,apds9930";
-			reg = <0x39>;
-			interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
-			vdd-supply = <&pm8941_l17>;
-			vddio-supply = <&pm8941_lvs1>;
-			led-max-microamp = <100000>;
-			amstaos,proximity-diodes = <0>;
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
 		};
+
+		pm8941_lvs1: lvs1 {};
+		pm8941_lvs3: lvs3 {};
 	};
+};
 
-	usb@f9a55000 {
-		status = "okay";
+&sdhc_1 {
+	status = "okay";
 
-		phys = <&usb_hs1_phy>;
-		phy-select = <&tcsr 0xb000 0>;
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
 
-		extcon = <&charger>, <&usb_id>;
-		vbus-supply = <&usb_otg_vbus>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
 
-		hnp-disable;
-		srp-disable;
-		adp-disable;
+&sdhc_2 {
+	status = "okay";
 
-		ulpi {
-			phy@a {
-				status = "okay";
+	max-frequency = <100000000>;
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pm8941_s3>;
+	non-removable;
 
-				v1p8-supply = <&pm8941_l6>;
-				v3p3-supply = <&pm8941_l24>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
 
-				qcom,init-seq = /bits/ 8 <0x1 0x64>;
-			};
+	bcrmf@1 {
+		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		brcm,drive-strength = <10>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_sleep_clk_pin>;
+	};
+};
+
+&tlmm {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
 		};
 	};
 
-	mdss@fd900000 {
-		status = "okay";
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
 
-		mdp@fd900000 {
-			status = "okay";
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
 		};
+	};
 
-		dsi@fd922800 {
-			status = "okay";
+	mpu6515_pin: mpu6515-state {
+		pins = "gpio73";
+		function = "gpio";
+		bias-disable;
+		input-enable;
+	};
 
-			vdda-supply = <&pm8941_l2>;
-			vdd-supply = <&pm8941_lvs3>;
-			vddio-supply = <&pm8941_l12>;
+	touch_pin: touch-state {
+		int-pins {
+			pins = "gpio5";
+			function = "gpio";
 
-			#address-cells = <1>;
-			#size-cells = <0>;
+			drive-strength = <2>;
+			bias-disable;
+			input-enable;
+		};
 
-			ports {
-				port@1 {
-					endpoint {
-						remote-endpoint = <&panel_in>;
-						data-lanes = <0 1 2 3>;
-					};
-				};
-			};
+		reset-pins {
+			pins = "gpio8";
+			function = "gpio";
 
-			panel: panel@0 {
-				reg = <0>;
-				compatible = "lg,acx467akm-7";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
 
-				pinctrl-names = "default";
-				pinctrl-0 = <&panel_pin>;
+	panel_pin: panel-state {
+		pins = "gpio12";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-disable;
+	};
 
-				port {
-					panel_in: endpoint {
-						remote-endpoint = <&dsi0_out>;
-					};
-				};
-			};
+	bt_pin: bt-state {
+		hostwake-pins {
+			pins = "gpio42";
+			function = "gpio";
 		};
 
-		dsi-phy@fd922a00 {
-			status = "okay";
+		devwake-pins {
+			pins = "gpio62";
+			function = "gpio";
+		};
 
-			vddio-supply = <&pm8941_l12>;
+		shutdown-pins {
+			pins = "gpio41";
+			function = "gpio";
 		};
 	};
 };
 
-&spmi_bus {
-	pm8941@0 {
-		gpios@c000 {
-			gpio_keys_pin_a: gpio-keys-active {
-				pins = "gpio2", "gpio3";
-				function = "normal";
-
-				bias-pull-up;
-				power-source = <PM8941_GPIO_S3>;
-			};
-
-			fuelgauge_pin: fuelgauge-int {
-				pins = "gpio9";
-				function = "normal";
+&usb {
+	status = "okay";
 
-				bias-disable;
-				input-enable;
-				power-source = <PM8941_GPIO_S3>;
-			};
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
 
-			wlan_sleep_clk_pin: wl-sleep-clk {
-				pins = "gpio16";
-				function = "func2";
+	extcon = <&charger>, <&usb_id>;
+	vbus-supply = <&usb_otg_vbus>;
 
-				output-high;
-				power-source = <PM8941_GPIO_S3>;
-			};
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
 
-			wlan_regulator_pin: wl-reg-active {
-				pins = "gpio17";
-				function = "normal";
+&usb_hs1_phy {
+	status = "okay";
 
-				bias-disable;
-				power-source = <PM8941_GPIO_S3>;
-			};
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
 
-			otg {
-				gpio-hog;
-				gpios = <35 GPIO_ACTIVE_HIGH>;
-				output-high;
-				line-name = "otg-gpio";
-			};
-		};
-	};
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
 };
diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
deleted file mode 100644
index a0f7f461f48c..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ /dev/null
@@ -1,848 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "qcom-pma8084.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
-	model = "Samsung Galaxy S5";
-	compatible = "samsung,klte", "qcom,msm8974";
-
-	aliases {
-		serial0 = &blsp1_uart1;
-		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
-		mmc1 = &sdhc_2; /* SDC2 SD card slot */
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	smd {
-		rpm {
-			rpm_requests {
-				pma8084-regulators {
-					compatible = "qcom,rpm-pma8084-regulators";
-					status = "okay";
-
-					pma8084_s1: s1 {
-						regulator-min-microvolt = <675000>;
-						regulator-max-microvolt = <1050000>;
-						regulator-always-on;
-					};
-
-					pma8084_s2: s2 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					pma8084_s3: s3 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-					};
-
-					pma8084_s4: s4 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					pma8084_s5: s5 {
-						regulator-min-microvolt = <2150000>;
-						regulator-max-microvolt = <2150000>;
-					};
-
-					pma8084_s6: s6 {
-						regulator-min-microvolt = <1050000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					pma8084_l1: l1 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					pma8084_l2: l2 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					pma8084_l3: l3 {
-						regulator-min-microvolt = <1050000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					pma8084_l4: l4 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					pma8084_l5: l5 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					pma8084_l6: l6 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					pma8084_l7: l7 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					pma8084_l8: l8 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					pma8084_l9: l9 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					pma8084_l10: l10 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					pma8084_l11: l11 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-					};
-
-					pma8084_l12: l12 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-					};
-
-					pma8084_l13: l13 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					pma8084_l14: l14 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					pma8084_l15: l15 {
-						regulator-min-microvolt = <2050000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					pma8084_l16: l16 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					pma8084_l17: l17 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					pma8084_l18: l18 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					pma8084_l19: l19 {
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					pma8084_l20: l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-allow-set-load;
-						regulator-system-load = <200000>;
-					};
-
-					pma8084_l21: l21 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-allow-set-load;
-						regulator-system-load = <200000>;
-					};
-
-					pma8084_l22: l22 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					pma8084_l23: l23 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					pma8084_l24: l24 {
-						regulator-min-microvolt = <3075000>;
-						regulator-max-microvolt = <3075000>;
-					};
-
-					pma8084_l25: l25 {
-						regulator-min-microvolt = <2100000>;
-						regulator-max-microvolt = <2100000>;
-					};
-
-					pma8084_l26: l26 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					pma8084_l27: l27 {
-						regulator-min-microvolt = <1000000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					pma8084_lvs1: lvs1 {};
-					pma8084_lvs2: lvs2 {};
-					pma8084_lvs3: lvs3 {};
-					pma8084_lvs4: lvs4 {};
-
-					pma8084_5vs1: 5vs1 {};
-				};
-			};
-		};
-	};
-
-	i2c-gpio-touchkey {
-		compatible = "i2c-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		sda-gpios = <&msmgpio 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&msmgpio 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c_touchkey_pins>;
-
-		touchkey@20 {
-			compatible = "cypress,tm2-touchkey";
-			reg = <0x20>;
-
-			interrupt-parent = <&pma8084_gpios>;
-			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&touchkey_pin>;
-
-			vcc-supply = <&max77826_ldo15>;
-			vdd-supply = <&pma8084_l19>;
-
-			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
-		};
-	};
-
-	i2c-gpio-led {
-		compatible = "i2c-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		scl-gpios = <&msmgpio 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&msmgpio 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c_led_gpioex_pins>;
-
-		i2c-gpio,delay-us = <2>;
-
-		gpio_expander: gpio@20 {
-			compatible = "nxp,pcal6416";
-			reg = <0x20>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			vcc-supply = <&pma8084_s4>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpioex_pin>;
-
-			reset-gpios = <&msmgpio 145 GPIO_ACTIVE_LOW>;
-		};
-
-		led-controller@30 {
-			compatible = "panasonic,an30259a";
-			reg = <0x30>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			led@1 {
-				reg = <1>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@2 {
-				reg = <2>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@3 {
-				reg = <3>;
-				function = LED_FUNCTION_STATUS;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-		};
-	};
-
-	vreg_wlan: wlan-regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "wl-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vreg_panel: panel-regulator {
-		compatible = "regulator-fixed";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_en_pin>;
-
-		regulator-name = "panel-vddr-reg";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-
-		gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	/delete-node/ vreg-boost;
-};
-
-&soc {
-	serial@f991e000 {
-		status = "okay";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		input-name = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		volume-down {
-			label = "volume_down";
-			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <15>;
-		};
-
-		home-key {
-			label = "home_key";
-			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_HOMEPAGE>;
-			wakeup-source;
-			debounce-interval = <15>;
-		};
-
-		volume-up {
-			label = "volume_up";
-			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <15>;
-		};
-	};
-
-	pinctrl@fd510000 {
-		sdhc1_pin_a: sdhc1-pin-active {
-			clk {
-				pins = "sdc1_clk";
-				drive-strength = <4>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc1_cmd", "sdc1_data";
-				drive-strength = <4>;
-				bias-pull-up;
-			};
-		};
-
-		sdhc2_pin_a: sdhc2-pin-active {
-			clk-cmd-data {
-				pins = "gpio35", "gpio36", "gpio37", "gpio38",
-					"gpio39", "gpio40";
-				function = "sdc3";
-				drive-strength = <8>;
-				bias-disable;
-			};
-		};
-
-		sdhc2_cd_pin: sdhc2-cd {
-			pins = "gpio62";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		sdhc3_pin_a: sdhc3-pin-active {
-			clk {
-				pins = "sdc2_clk";
-				drive-strength = <6>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc2_cmd", "sdc2_data";
-				drive-strength = <6>;
-				bias-pull-up;
-			};
-		};
-
-		i2c2_pins: i2c2 {
-			mux {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-		i2c6_pins: i2c6 {
-			mux {
-				pins = "gpio29", "gpio30";
-				function = "blsp_i2c6";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-		i2c12_pins: i2c12 {
-			mux {
-				pins = "gpio87", "gpio88";
-				function = "blsp_i2c12";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-		i2c_touchkey_pins: i2c-touchkey {
-			mux {
-				pins = "gpio95", "gpio96";
-				function = "gpio";
-				input-enable;
-				bias-pull-up;
-			};
-		};
-
-		i2c_led_gpioex_pins: i2c-led-gpioex {
-			mux {
-				pins = "gpio120", "gpio121";
-				function = "gpio";
-				input-enable;
-				bias-pull-down;
-			};
-		};
-
-		gpioex_pin: gpioex {
-			res {
-				pins = "gpio145";
-				function = "gpio";
-
-				bias-pull-up;
-				drive-strength = <2>;
-			};
-		};
-
-		wifi_pin: wifi {
-			int {
-				pins = "gpio92";
-				function = "gpio";
-
-				input-enable;
-				bias-pull-down;
-			};
-		};
-
-		panel_te_pin: panel {
-			te {
-				pins = "gpio12";
-				function = "mdp_vsync";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-	};
-
-	sdhc_1: sdhci@f9824900 {
-		status = "okay";
-
-		vmmc-supply = <&pma8084_l20>;
-		vqmmc-supply = <&pma8084_s4>;
-
-		bus-width = <8>;
-		non-removable;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc1_pin_a>;
-	};
-
-	sdhc_2: sdhci@f9864900 {
-		status = "okay";
-
-		max-frequency = <100000000>;
-
-		vmmc-supply = <&pma8084_l21>;
-		vqmmc-supply = <&pma8084_l13>;
-
-		bus-width = <4>;
-
-		/* cd-gpio is intentionally disabled. If enabled, an SD card
-		 * present during boot is not initialized correctly. Without
-		 * cd-gpios the driver resorts to polling, so hotplug works.
-		 */
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>;
-		// cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
-	};
-
-	sdhci@f98a4900 {
-		status = "okay";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		max-frequency = <100000000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc3_pin_a>;
-
-		vmmc-supply = <&vreg_wlan>;
-		vqmmc-supply = <&pma8084_s4>;
-
-		bus-width = <4>;
-		non-removable;
-
-		wifi@1 {
-			reg = <1>;
-			compatible = "brcm,bcm4329-fmac";
-
-			interrupt-parent = <&msmgpio>;
-			interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "host-wake";
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
-		};
-	};
-
-	usb@f9a55000 {
-		status = "okay";
-
-		phys = <&usb_hs1_phy>;
-		phy-select = <&tcsr 0xb000 0>;
-		/*extcon = <&smbb>, <&usb_id>;*/
-		/*vbus-supply = <&chg_otg>;*/
-
-		hnp-disable;
-		srp-disable;
-		adp-disable;
-
-		ulpi {
-			phy@a {
-				status = "okay";
-
-				v1p8-supply = <&pma8084_l6>;
-				v3p3-supply = <&pma8084_l24>;
-
-				/*extcon = <&smbb>;*/
-				qcom,init-seq = /bits/ 8 <0x1 0x64>;
-			};
-		};
-	};
-
-	i2c@f9924000 {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_pins>;
-
-		touchscreen@20 {
-			compatible = "syna,rmi4-i2c";
-			reg = <0x20>;
-
-			interrupt-parent = <&pma8084_gpios>;
-			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-			vdd-supply = <&max77826_ldo13>;
-			vio-supply = <&pma8084_lvs2>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&touch_pin>;
-
-			syna,startup-delay-ms = <100>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			rmi4-f01@1 {
-				reg = <0x1>;
-				syna,nosleep-mode = <1>;
-			};
-
-			rmi4-f12@12 {
-				reg = <0x12>;
-				syna,sensor-type = <1>;
-			};
-		};
-	};
-
-	i2c@f9928000 {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_pins>;
-
-		pmic@60 {
-			reg = <0x60>;
-			compatible = "maxim,max77826";
-
-			regulators {
-				max77826_ldo1: LDO1 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				max77826_ldo2: LDO2 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				max77826_ldo3: LDO3 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				max77826_ldo4: LDO4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				max77826_ldo5: LDO5 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				max77826_ldo6: LDO6 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				max77826_ldo7: LDO7 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				max77826_ldo8: LDO8 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				max77826_ldo9: LDO9 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				max77826_ldo10: LDO10 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2950000>;
-				};
-
-				max77826_ldo11: LDO11 {
-					regulator-min-microvolt = <2700000>;
-					regulator-max-microvolt = <2950000>;
-				};
-
-				max77826_ldo12: LDO12 {
-					regulator-min-microvolt = <2500000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				max77826_ldo13: LDO13 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				max77826_ldo14: LDO14 {
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				max77826_ldo15: LDO15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				max77826_buck: BUCK {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-				};
-
-				max77826_buckboost: BUCKBOOST {
-					regulator-min-microvolt = <3400000>;
-					regulator-max-microvolt = <3400000>;
-				};
-			};
-		};
-	};
-
-	i2c@f9968000 {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c12_pins>;
-
-		fuelgauge@36 {
-			compatible = "maxim,max17048";
-			reg = <0x36>;
-
-			maxim,double-soc;
-			maxim,rcomp = /bits/ 8 <0x56>;
-
-			interrupt-parent = <&pma8084_gpios>;
-			interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&fuelgauge_pin>;
-		};
-	};
-
-	adreno@fdb00000 {
-		status = "ok";
-	};
-
-	mdss@fd900000 {
-		status = "ok";
-
-		mdp@fd900000 {
-			status = "ok";
-		};
-
-		dsi@fd922800 {
-			status = "ok";
-
-			vdda-supply = <&pma8084_l2>;
-			vdd-supply = <&pma8084_l22>;
-			vddio-supply = <&pma8084_l12>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ports {
-				port@1 {
-					endpoint {
-						remote-endpoint = <&panel_in>;
-						data-lanes = <0 1 2 3>;
-					};
-				};
-			};
-
-			panel: panel@0 {
-				reg = <0>;
-				compatible = "samsung,s6e3fa2";
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
-
-				iovdd-supply = <&pma8084_lvs4>;
-				vddr-supply = <&vreg_panel>;
-
-				reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
-				te-gpios = <&msmgpio 12 GPIO_ACTIVE_HIGH>;
-
-				port {
-					panel_in: endpoint {
-						remote-endpoint = <&dsi0_out>;
-					};
-				};
-			};
-		};
-
-		dsi-phy@fd922a00 {
-			status = "ok";
-
-			vddio-supply = <&pma8084_l12>;
-		};
-	};
-};
-
-&spmi_bus {
-	pma8084@0 {
-		gpios@c000 {
-			gpio_keys_pin_a: gpio-keys-active {
-				pins = "gpio2", "gpio3", "gpio5";
-				function = "normal";
-
-				bias-pull-up;
-				power-source = <PMA8084_GPIO_S4>;
-			};
-
-			touchkey_pin: touchkey-int-pin {
-				pins = "gpio6";
-				function = "normal";
-				bias-disable;
-				input-enable;
-				power-source = <PMA8084_GPIO_S4>;
-			};
-
-			touch_pin: touchscreen-int-pin {
-				pins = "gpio8";
-				function = "normal";
-				bias-disable;
-				input-enable;
-				power-source = <PMA8084_GPIO_S4>;
-			};
-
-			panel_en_pin: panel-en-pin {
-				pins = "gpio14";
-				function = "normal";
-				bias-pull-up;
-				power-source = <PMA8084_GPIO_S4>;
-				qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			};
-
-			wlan_sleep_clk_pin: wlan-sleep-clk-pin {
-				pins = "gpio16";
-				function = "func2";
-
-				output-high;
-				power-source = <PMA8084_GPIO_S4>;
-				qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
-			};
-
-			panel_rst_pin: panel-rst-pin {
-				pins = "gpio17";
-				function = "normal";
-				bias-disable;
-				power-source = <PMA8084_GPIO_S4>;
-				qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			};
-
-
-			fuelgauge_pin: fuelgauge-int-pin {
-				pins = "gpio21";
-				function = "normal";
-				bias-disable;
-				input-enable;
-				power-source = <PMA8084_GPIO_S4>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
deleted file mode 100644
index 398a3eaf306b..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
+++ /dev/null
@@ -1,436 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Sony Xperia Z1 Compact";
-	compatible = "sony,xperia-amami", "qcom,msm8974";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		input-name = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
-		volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	memory@0 {
-		reg = <0 0x40000000>, <0x40000000 0x40000000>;
-		device_type = "memory";
-	};
-
-	smd {
-		rpm {
-			rpm_requests {
-				pm8841-regulators {
-					s1 {
-						regulator-min-microvolt = <675000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s2 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s3 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s4 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-				};
-
-				pm8941-regulators {
-					vdd_l1_l3-supply = <&pm8941_s1>;
-					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-					vdd_l4_l11-supply = <&pm8941_s1>;
-					vdd_l5_l7-supply = <&pm8941_s2>;
-					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-					vdd_l21-supply = <&vreg_boost>;
-
-					s1 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s2 {
-						regulator-min-microvolt = <2150000>;
-						regulator-max-microvolt = <2150000>;
-						regulator-boot-on;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s4 {
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-					};
-
-					l1 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l2 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l3 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l4 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l5 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l6 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l7 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l8 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l9 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l11 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1350000>;
-					};
-
-					l12 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l13 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l14 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l15 {
-						regulator-min-microvolt = <2050000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					l16 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l17 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l18 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l19 {
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-allow-set-load;
-						regulator-boot-on;
-						regulator-system-load = <200000>;
-					};
-
-					l21 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l22 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					l23 {
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-					};
-
-					l24 {
-						regulator-min-microvolt = <3075000>;
-						regulator-max-microvolt = <3075000>;
-
-						regulator-boot-on;
-					};
-				};
-			};
-		};
-	};
-};
-
-&soc {
-	sdhci@f9824900 {
-		status = "okay";
-
-		vmmc-supply = <&pm8941_l20>;
-		vqmmc-supply = <&pm8941_s3>;
-
-		bus-width = <8>;
-		non-removable;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc1_pin_a>;
-	};
-
-	sdhci@f98a4900 {
-		status = "okay";
-
-		bus-width = <4>;
-
-		vmmc-supply = <&pm8941_l21>;
-		vqmmc-supply = <&pm8941_l13>;
-
-		cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
-	};
-
-	serial@f991e000 {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&blsp1_uart2_pin_a>;
-	};
-
-
-	pinctrl@fd510000 {
-		blsp1_uart2_pin_a: blsp1-uart2-pin-active {
-			rx {
-				pins = "gpio5";
-				function = "blsp_uart2";
-
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			tx {
-				pins = "gpio4";
-				function = "blsp_uart2";
-
-				drive-strength = <4>;
-				bias-disable;
-			};
-		};
-
-		i2c2_pins: i2c2 {
-			mux {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-		sdhc1_pin_a: sdhc1-pin-active {
-			clk {
-				pins = "sdc1_clk";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc1_cmd", "sdc1_data";
-				drive-strength = <10>;
-				bias-pull-up;
-			};
-		};
-
-		sdhc2_cd_pin_a: sdhc2-cd-pin-active {
-			pins = "gpio62";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-disable;
-		 };
-
-		sdhc2_pin_a: sdhc2-pin-active {
-			clk {
-				pins = "sdc2_clk";
-				drive-strength = <10>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc2_cmd", "sdc2_data";
-				drive-strength = <6>;
-				bias-pull-up;
-			};
-		};
-	};
-
-	dma-controller@f9944000 {
-		qcom,controlled-remotely;
-	};
-
-	usb@f9a55000 {
-		status = "okay";
-
-		phys = <&usb_hs1_phy>;
-		phy-select = <&tcsr 0xb000 0>;
-		extcon = <&smbb>, <&usb_id>;
-		vbus-supply = <&chg_otg>;
-
-		hnp-disable;
-		srp-disable;
-		adp-disable;
-
-		ulpi {
-			phy@a {
-				status = "okay";
-
-				v1p8-supply = <&pm8941_l6>;
-				v3p3-supply = <&pm8941_l24>;
-
-				extcon = <&smbb>;
-				qcom,init-seq = /bits/ 8 <0x1 0x64>;
-			};
-		};
-	};
-};
-
-&spmi_bus {
-	pm8941@0 {
-		charger@1000 {
-			qcom,fast-charge-safe-current = <1300000>;
-			qcom,fast-charge-current-limit = <1300000>;
-			qcom,dc-current-limit = <1300000>;
-			qcom,fast-charge-safe-voltage = <4400000>;
-			qcom,fast-charge-high-threshold-voltage = <4350000>;
-			qcom,fast-charge-low-threshold-voltage = <3400000>;
-			qcom,auto-recharge-threshold-voltage = <4200000>;
-			qcom,minimum-input-voltage = <4300000>;
-		};
-
-		gpios@c000 {
-			gpio_keys_pin_a: gpio-keys-active {
-				pins = "gpio2", "gpio3", "gpio4", "gpio5";
-				function = "normal";
-
-				bias-pull-up;
-				power-source = <PM8941_GPIO_S3>;
-			};
-		};
-
-		coincell@2800 {
-			status = "okay";
-			qcom,rset-ohms = <2100>;
-			qcom,vset-millivolts = <3000>;
-		};
-	};
-
-	pm8941@1 {
-		wled@d800 {
-			status = "okay";
-
-			qcom,cs-out;
-			qcom,current-limit = <20>;
-			qcom,current-boost-limit = <805>;
-			qcom,switching-freq = <1600>;
-			qcom,ovp = <29>;
-			qcom,num-strings = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
deleted file mode 100644
index f4ec08f13003..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
+++ /dev/null
@@ -1,643 +0,0 @@
-#include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Sony Xperia Z2 Tablet";
-	compatible = "sony,xperia-castor", "qcom,msm8974";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		input-name = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
-		volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	smd {
-		rpm {
-			rpm_requests {
-				pm8941-regulators {
-					vdd_l1_l3-supply = <&pm8941_s1>;
-					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-					vdd_l4_l11-supply = <&pm8941_s1>;
-					vdd_l5_l7-supply = <&pm8941_s2>;
-					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-					vdd_l21-supply = <&vreg_boost>;
-
-					s1 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s2 {
-						regulator-min-microvolt = <2150000>;
-						regulator-max-microvolt = <2150000>;
-						regulator-boot-on;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
-
-						regulator-system-load = <154000>;
-					};
-
-					s4 {
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-					};
-
-					l1 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l2 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l3 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l4 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l5 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l6 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l7 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l8 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l9 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l11 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1350000>;
-					};
-
-					l12 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l13 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l14 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l15 {
-						regulator-min-microvolt = <2050000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					l16 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l17 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l18 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l19 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-allow-set-load;
-						regulator-boot-on;
-						regulator-allow-set-load;
-						regulator-system-load = <500000>;
-					};
-
-					l21 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l22 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					l23 {
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-					};
-
-					l24 {
-						regulator-min-microvolt = <3075000>;
-						regulator-max-microvolt = <3075000>;
-
-						regulator-boot-on;
-					};
-				};
-			};
-		};
-	};
-
-	vreg_bl_vddio: lcd-backlight-vddio {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_bl_vddio";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		gpio = <&msmgpio 69 0>;
-		enable-active-high;
-
-		vin-supply = <&pm8941_s3>;
-		startup-delay-us = <70000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_backlight_en_pin_a>;
-	};
-
-	vreg_vsp: lcd-dcdc-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_vsp";
-		regulator-min-microvolt = <5600000>;
-		regulator-max-microvolt = <5600000>;
-
-		gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
-	};
-
-	vreg_wlan: wlan-regulator {
-		compatible = "regulator-fixed";
-
-		regulator-name = "wl-reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_regulator_pin>;
-	};
-};
-
-&soc {
-	sdhci@f9824900 {
-		status = "okay";
-
-		vmmc-supply = <&pm8941_l20>;
-		vqmmc-supply = <&pm8941_s3>;
-
-		bus-width = <8>;
-		non-removable;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc1_pin_a>;
-	};
-
-	sdhci@f9864900 {
-		status = "okay";
-
-		max-frequency = <100000000>;
-		non-removable;
-		vmmc-supply = <&vreg_wlan>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc3_pin_a>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		bcrmf@1 {
-			compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
-			reg = <1>;
-
-			brcm,drive-strength = <10>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_sleep_clk_pin>;
-		};
-	};
-
-	sdhci@f98a4900 {
-		status = "okay";
-
-		bus-width = <4>;
-
-		vmmc-supply = <&pm8941_l21>;
-		vqmmc-supply = <&pm8941_l13>;
-
-		cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
-	};
-
-	serial@f991e000 {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&blsp1_uart2_pin_a>;
-	};
-
-	usb@f9a55000 {
-		status = "okay";
-
-		phys = <&usb_hs1_phy>;
-		phy-select = <&tcsr 0xb000 0>;
-		extcon = <&smbb>, <&usb_id>;
-		vbus-supply = <&chg_otg>;
-
-		hnp-disable;
-		srp-disable;
-		adp-disable;
-
-		ulpi {
-			phy@a {
-				status = "okay";
-
-				v1p8-supply = <&pm8941_l6>;
-				v3p3-supply = <&pm8941_l24>;
-
-				extcon = <&smbb>;
-				qcom,init-seq = /bits/ 8 <0x1 0x64>;
-			};
-		};
-	};
-
-	pinctrl@fd510000 {
-		blsp1_uart2_pin_a: blsp1-uart2-pin-active {
-			rx {
-				pins = "gpio5";
-				function = "blsp_uart2";
-
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			tx {
-				pins = "gpio4";
-				function = "blsp_uart2";
-
-				drive-strength = <4>;
-				bias-disable;
-			};
-		};
-
-		i2c8_pins: i2c8 {
-			mux {
-				pins = "gpio47", "gpio48";
-				function = "blsp_i2c8";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-		i2c11_pins: i2c11 {
-			mux {
-				pins = "gpio83", "gpio84";
-				function = "blsp_i2c11";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-		lcd_backlight_en_pin_a: lcd-backlight-vddio {
-			pins = "gpio69";
-			drive-strength = <10>;
-			output-low;
-			bias-disable;
-		};
-
-		sdhc1_pin_a: sdhc1-pin-active {
-			clk {
-				pins = "sdc1_clk";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc1_cmd", "sdc1_data";
-				drive-strength = <10>;
-				bias-pull-up;
-			};
-		};
-
-		sdhc2_cd_pin_a: sdhc2-cd-pin-active {
-			pins = "gpio62";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-disable;
-		 };
-
-		sdhc2_pin_a: sdhc2-pin-active {
-			clk {
-				pins = "sdc2_clk";
-				drive-strength = <6>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc2_cmd", "sdc2_data";
-				drive-strength = <6>;
-				bias-pull-up;
-			};
-		};
-
-		sdhc3_pin_a: sdhc3-pin-active {
-			clk {
-				pins = "gpio40";
-				function = "sdc3";
-
-				drive-strength = <10>;
-				bias-disable;
-			};
-
-			cmd {
-				pins = "gpio39";
-				function = "sdc3";
-
-				drive-strength = <10>;
-				bias-pull-up;
-			};
-
-			data {
-				pins = "gpio35", "gpio36", "gpio37", "gpio38";
-				function = "sdc3";
-
-				drive-strength = <10>;
-				bias-pull-up;
-			};
-		};
-
-		ts_int_pin: synaptics {
-			pin {
-				pins = "gpio86";
-				function = "gpio";
-
-				drive-strength = <2>;
-				bias-disable;
-				input-enable;
-			};
-		};
-	};
-
-	i2c@f9964000 {
-		status = "okay";
-
-		clock-frequency = <355000>;
-		qcom,src-freq = <50000000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c8_pins>;
-
-		synaptics@2c {
-			compatible = "syna,rmi4-i2c";
-			reg = <0x2c>;
-
-			interrupt-parent = <&msmgpio>;
-			interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			vdd-supply = <&pm8941_l22>;
-			vio-supply = <&pm8941_lvs3>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&ts_int_pin>;
-
-			syna,startup-delay-ms = <10>;
-
-			rmi-f01@1 {
-				reg = <0x1>;
-				syna,nosleep = <1>;
-			};
-
-			rmi-f11@11 {
-				reg = <0x11>;
-				syna,f11-flip-x = <1>;
-				syna,sensor-type = <1>;
-			};
-		};
-	};
-
-	i2c@f9967000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c11_pins>;
-		clock-frequency = <355000>;
-		qcom,src-freq = <50000000>;
-
-		lp8566_wled: backlight@2c {
-			compatible = "ti,lp8556";
-			reg = <0x2c>;
-			power-supply = <&vreg_bl_vddio>;
-
-			bl-name = "backlight";
-			dev-ctrl = /bits/ 8 <0x05>;
-			init-brt = /bits/ 8 <0x3f>;
-			rom_a0h {
-				rom-addr = /bits/ 8 <0xa0>;
-				rom-val = /bits/ 8 <0xff>;
-			};
-			rom_a1h {
-				rom-addr = /bits/ 8 <0xa1>;
-				rom-val = /bits/ 8 <0x3f>;
-			};
-			rom_a2h {
-				rom-addr = /bits/ 8 <0xa2>;
-				rom-val = /bits/ 8 <0x20>;
-			};
-			rom_a3h {
-				rom-addr = /bits/ 8 <0xa3>;
-				rom-val = /bits/ 8 <0x5e>;
-			};
-			rom_a4h {
-				rom-addr = /bits/ 8 <0xa4>;
-				rom-val = /bits/ 8 <0x02>;
-			};
-			rom_a5h {
-				rom-addr = /bits/ 8 <0xa5>;
-				rom-val = /bits/ 8 <0x04>;
-			};
-			rom_a6h {
-				rom-addr = /bits/ 8 <0xa6>;
-				rom-val = /bits/ 8 <0x80>;
-			};
-			rom_a7h {
-				rom-addr = /bits/ 8 <0xa7>;
-				rom-val = /bits/ 8 <0xf7>;
-			};
-			rom_a9h {
-				rom-addr = /bits/ 8 <0xa9>;
-				rom-val = /bits/ 8 <0x80>;
-			};
-			rom_aah {
-				rom-addr = /bits/ 8 <0xaa>;
-				rom-val = /bits/ 8 <0x0f>;
-			};
-			rom_aeh {
-				rom-addr = /bits/ 8 <0xae>;
-				rom-val = /bits/ 8 <0x0f>;
-			};
-		};
-	};
-};
-
-&spmi_bus {
-	pm8941@0 {
-		charger@1000 {
-			qcom,fast-charge-safe-current = <1500000>;
-			qcom,fast-charge-current-limit = <1500000>;
-			qcom,dc-current-limit = <1800000>;
-			qcom,fast-charge-safe-voltage = <4400000>;
-			qcom,fast-charge-high-threshold-voltage = <4350000>;
-			qcom,fast-charge-low-threshold-voltage = <3400000>;
-			qcom,auto-recharge-threshold-voltage = <4200000>;
-			qcom,minimum-input-voltage = <4300000>;
-		};
-
-		gpios@c000 {
-			gpio_keys_pin_a: gpio-keys-active {
-				pins = "gpio2", "gpio5";
-				function = "normal";
-
-				bias-pull-up;
-				power-source = <PM8941_GPIO_S3>;
-			};
-
-			wlan_sleep_clk_pin: wl-sleep-clk {
-				pins = "gpio17";
-				function = "func2";
-
-				output-high;
-				power-source = <PM8941_GPIO_S3>;
-			};
-
-			wlan_regulator_pin: wl-reg-active {
-				pins = "gpio18";
-				function = "normal";
-
-				bias-disable;
-				power-source = <PM8941_GPIO_S3>;
-			};
-
-			lcd_dcdc_en_pin_a: lcd-dcdc-en-active {
-				pins = "gpio20";
-				function = "normal";
-
-				bias-disable;
-				power-source = <PM8941_GPIO_S3>;
-				input-disable;
-				output-low;
-			};
-
-		};
-
-		coincell@2800 {
-			status = "okay";
-			qcom,rset-ohms = <2100>;
-			qcom,vset-millivolts = <3000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
deleted file mode 100644
index 9743beebd84d..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ /dev/null
@@ -1,485 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	model = "Sony Xperia Z1";
-	compatible = "sony,xperia-honami", "qcom,msm8974";
-
-	aliases {
-		serial0 = &blsp1_uart2;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		input-name = "gpio-keys";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pin_a>;
-
-		volume-down {
-			label = "volume_down";
-			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-
-		camera-snapshot {
-			label = "camera_snapshot";
-			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA>;
-		};
-
-		camera-focus {
-			label = "camera_focus";
-			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_CAMERA_FOCUS>;
-		};
-
-		volume-up {
-			label = "volume_up";
-			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <1>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	memory@0 {
-		reg = <0 0x40000000>, <0x40000000 0x40000000>;
-		device_type = "memory";
-	};
-
-	smd {
-		rpm {
-			rpm_requests {
-				pm8841-regulators {
-					s1 {
-						regulator-min-microvolt = <675000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s2 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s3 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-
-					s4 {
-						regulator-min-microvolt = <500000>;
-						regulator-max-microvolt = <1050000>;
-					};
-				};
-
-				pm8941-regulators {
-					vdd_l1_l3-supply = <&pm8941_s1>;
-					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
-					vdd_l4_l11-supply = <&pm8941_s1>;
-					vdd_l5_l7-supply = <&pm8941_s2>;
-					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
-					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
-					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
-					vdd_l21-supply = <&vreg_boost>;
-
-					s1 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s2 {
-						regulator-min-microvolt = <2150000>;
-						regulator-max-microvolt = <2150000>;
-						regulator-boot-on;
-					};
-
-					s3 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					s4 {
-						regulator-min-microvolt = <5000000>;
-						regulator-max-microvolt = <5000000>;
-					};
-
-					l1 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l2 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l3 {
-						regulator-min-microvolt = <1200000>;
-						regulator-max-microvolt = <1200000>;
-					};
-
-					l4 {
-						regulator-min-microvolt = <1225000>;
-						regulator-max-microvolt = <1225000>;
-					};
-
-					l5 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l6 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l7 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-boot-on;
-					};
-
-					l8 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l9 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-					};
-
-					l11 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1350000>;
-					};
-
-					l12 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-
-						regulator-always-on;
-						regulator-boot-on;
-					};
-
-					l13 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l14 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-					};
-
-					l15 {
-						regulator-min-microvolt = <2050000>;
-						regulator-max-microvolt = <2050000>;
-					};
-
-					l16 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l17 {
-						regulator-min-microvolt = <2700000>;
-						regulator-max-microvolt = <2700000>;
-					};
-
-					l18 {
-						regulator-min-microvolt = <2850000>;
-						regulator-max-microvolt = <2850000>;
-					};
-
-					l19 {
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-					};
-
-					l20 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-allow-set-load;
-						regulator-boot-on;
-						regulator-system-load = <200000>;
-					};
-
-					l21 {
-						regulator-min-microvolt = <2950000>;
-						regulator-max-microvolt = <2950000>;
-
-						regulator-boot-on;
-					};
-
-					l22 {
-						regulator-min-microvolt = <3000000>;
-						regulator-max-microvolt = <3000000>;
-					};
-
-					l23 {
-						regulator-min-microvolt = <2800000>;
-						regulator-max-microvolt = <2800000>;
-					};
-
-					l24 {
-						regulator-min-microvolt = <3075000>;
-						regulator-max-microvolt = <3075000>;
-
-						regulator-boot-on;
-					};
-				};
-			};
-		};
-	};
-};
-
-&soc {
-	usb@f9a55000 {
-		status = "okay";
-
-		phys = <&usb_hs1_phy>;
-		phy-select = <&tcsr 0xb000 0>;
-		extcon = <&smbb>, <&usb_id>;
-		vbus-supply = <&chg_otg>;
-
-		hnp-disable;
-		srp-disable;
-		adp-disable;
-
-		ulpi {
-			phy@a {
-				status = "okay";
-
-				v1p8-supply = <&pm8941_l6>;
-				v3p3-supply = <&pm8941_l24>;
-
-				extcon = <&smbb>;
-				qcom,init-seq = /bits/ 8 <0x1 0x64>;
-			};
-		};
-	};
-
-	sdhci@f9824900 {
-		status = "okay";
-
-		vmmc-supply = <&pm8941_l20>;
-		vqmmc-supply = <&pm8941_s3>;
-
-		bus-width = <8>;
-		non-removable;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc1_pin_a>;
-	};
-
-	sdhci@f98a4900 {
-		status = "okay";
-
-		bus-width = <4>;
-
-		vmmc-supply = <&pm8941_l21>;
-		vqmmc-supply = <&pm8941_l13>;
-
-		cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
-	};
-
-	serial@f991e000 {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&blsp1_uart2_pin_a>;
-	};
-
-	i2c@f9924000 {
-		status = "okay";
-
-		clock-frequency = <355000>;
-		qcom,src-freq = <50000000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_pins>;
-
-		synaptics@2c {
-			compatible = "syna,rmi4-i2c";
-			reg = <0x2c>;
-
-			interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			vdd-supply = <&pm8941_l22>;
-			vio-supply = <&pm8941_lvs3>;
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&ts_int_pin>;
-
-			syna,startup-delay-ms = <10>;
-
-			rmi4-f01@1 {
-				reg = <0x1>;
-				syna,nosleep-mode = <1>;
-			};
-
-			rmi4-f11@11 {
-				reg = <0x11>;
-				touchscreen-inverted-x;
-				syna,sensor-type = <1>;
-			};
-		};
-	};
-
-	pinctrl@fd510000 {
-		blsp1_uart2_pin_a: blsp1-uart2-pin-active {
-			rx {
-				pins = "gpio5";
-				function = "blsp_uart2";
-
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			tx {
-				pins = "gpio4";
-				function = "blsp_uart2";
-
-				drive-strength = <4>;
-				bias-disable;
-			};
-		};
-
-		i2c2_pins: i2c2 {
-			mux {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
-
-				drive-strength = <2>;
-				bias-disable;
-			};
-		};
-
-		sdhc1_pin_a: sdhc1-pin-active {
-			clk {
-				pins = "sdc1_clk";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc1_cmd", "sdc1_data";
-				drive-strength = <10>;
-				bias-pull-up;
-			};
-		};
-
-		sdhc2_cd_pin_a: sdhc2-cd-pin-active {
-			pins = "gpio62";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-disable;
-		 };
-
-		sdhc2_pin_a: sdhc2-pin-active {
-			clk {
-				pins = "sdc2_clk";
-				drive-strength = <10>;
-				bias-disable;
-			};
-
-			cmd-data {
-				pins = "sdc2_cmd", "sdc2_data";
-				drive-strength = <6>;
-				bias-pull-up;
-			};
-		};
-
-		ts_int_pin: touch-int {
-			pin {
-				pins = "gpio61";
-				function = "gpio";
-
-				drive-strength = <2>;
-				bias-disable;
-				input-enable;
-			};
-		};
-	};
-
-	dma-controller@f9944000 {
-		qcom,controlled-remotely;
-	};
-};
-
-&spmi_bus {
-	pm8941@0 {
-		charger@1000 {
-			qcom,fast-charge-safe-current = <1500000>;
-			qcom,fast-charge-current-limit = <1500000>;
-			qcom,dc-current-limit = <1800000>;
-			qcom,fast-charge-safe-voltage = <4400000>;
-			qcom,fast-charge-high-threshold-voltage = <4350000>;
-			qcom,fast-charge-low-threshold-voltage = <3400000>;
-			qcom,auto-recharge-threshold-voltage = <4200000>;
-			qcom,minimum-input-voltage = <4300000>;
-		};
-
-		gpios@c000 {
-			gpio_keys_pin_a: gpio-keys-active {
-				pins = "gpio2", "gpio3", "gpio4", "gpio5";
-				function = "normal";
-
-				bias-pull-up;
-				power-source = <PM8941_GPIO_S3>;
-			};
-		};
-
-		coincell@2800 {
-			status = "okay";
-			qcom,rset-ohms = <2100>;
-			qcom,vset-millivolts = <3000>;
-		};
-	};
-
-	pm8941@1 {
-		wled@d800 {
-			status = "okay";
-
-			qcom,cs-out;
-			qcom,current-limit = <20>;
-			qcom,current-boost-limit = <805>;
-			qcom,switching-freq = <1600>;
-			qcom,ovp = <29>;
-			qcom,num-strings = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts
new file mode 100644
index 000000000000..9f2ab5c122d0
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974-sony-xperia-rhine.dtsi"
+
+/ {
+	model = "Sony Xperia Z1 Compact";
+	compatible = "sony,xperia-amami", "qcom,msm8974";
+	chassis-type = "handset";
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1300000>;
+	qcom,fast-charge-current-limit = <1300000>;
+	qcom,dc-current-limit = <1300000>;
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts
new file mode 100644
index 000000000000..9028f17e5c4a
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974-sony-xperia-rhine.dtsi"
+
+/ {
+	model = "Sony Xperia Z1";
+	compatible = "sony,xperia-honami", "qcom,msm8974";
+	chassis-type = "handset";
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
new file mode 100644
index 000000000000..d3bec03b126c
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@3e8e0000 {
+			compatible = "ramoops";
+			reg = <0x3e8e0000 0x200000>;
+
+			console-size = <0x100000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x80000>;
+		};
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	synaptics@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+
+		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&pm8941_l22>;
+		vio-supply = <&pm8941_lvs3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_pin>;
+
+		syna,startup-delay-ms = <10>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			touchscreen-inverted-x;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	nfc@28 {
+		compatible = "nxp,pn544-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <59 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&pm8941_gpios 23 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_dma {
+	qcom,controlled-remotely;
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	/* sii8334 MHL HDMI bridge */
+};
+
+&pm8941_coincell {
+	status = "okay";
+	qcom,rset-ohms = <2100>;
+	qcom,vset-millivolts = <3000>;
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio3", "gpio4", "gpio5";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
+};
+
+&pm8941_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@6 {
+			reg = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@7 {
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&pm8941_wled {
+	status = "okay";
+
+	qcom,cs-out;
+	qcom,current-limit = <20>;
+	qcom,current-boost-limit = <805>;
+	qcom,switching-freq = <1600>;
+	qcom,ovp = <29>;
+	qcom,num-strings = <2>;
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+};
+
+&remoteproc_mss {
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s4: s4 {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+
+		pm8941_lvs3: lvs3 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l13>;
+
+	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1500000>;
+	qcom,fast-charge-current-limit = <1500000>;
+	qcom,dc-current-limit = <1800000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,fast-charge-low-threshold-voltage = <3400000>;
+	qcom,auto-recharge-threshold-voltage = <4200000>;
+	qcom,minimum-input-voltage = <4300000>;
+};
+
+&tlmm {
+	ts_int_pin: touch-int-state {
+		pins = "gpio61";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_on: sdc-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		cd-pins {
+			pins = "gpio62";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index c65d33591efa..8208012684d4 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -12,61 +12,19 @@
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
-	model = "Qualcomm MSM8974";
-	compatible = "qcom,msm8974";
 	interrupt-parent = <&intc>;
 
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mpss_region: mpss@8000000 {
-			reg = <0x08000000 0x5100000>;
-			no-map;
-		};
-
-		mba_region: mba@d100000 {
-			reg = <0x0d100000 0x100000>;
-			no-map;
-		};
-
-		wcnss_region: wcnss@d200000 {
-			reg = <0x0d200000 0xa00000>;
-			no-map;
-		};
-
-		adsp_region: adsp@dc00000 {
-			reg = <0x0dc00000 0x1900000>;
-			no-map;
-		};
-
-		venus@f500000 {
-			reg = <0x0f500000 0x500000>;
-			no-map;
-		};
-
-		smem_region: smem@fa00000 {
-			reg = <0xfa00000 0x200000>;
-			no-map;
-		};
-
-		tz@fc00000 {
-			reg = <0x0fc00000 0x160000>;
-			no-map;
-		};
-
-		rfsa@fd60000 {
-			reg = <0x0fd60000 0x20000>;
-			no-map;
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
 		};
 
-		rmtfs@fd80000 {
-			compatible = "qcom,rmtfs-mem";
-			reg = <0x0fd80000 0x180000>;
-			no-map;
-
-			qcom,client-id = <1>;
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
 		};
 	};
 
@@ -136,238 +94,75 @@
 		};
 	};
 
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8974", "qcom,scm";
+			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x0 0x0>;
 	};
 
-	thermal-zones {
-		cpu-thermal0 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 5>;
-
-			trips {
-				cpu_alert0: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit0: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu-thermal1 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 6>;
-
-			trips {
-				cpu_alert1: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit1: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu-thermal2 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 7>;
-
-			trips {
-				cpu_alert2: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit2: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu-thermal3 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 8>;
-
-			trips {
-				cpu_alert3: trip0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu_crit3: trip1 {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		q6-dsp-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+	pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <GIC_PPI 7 0xf04>;
+	};
 
-			thermal-sensors = <&tsens 1>;
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
 
-			trips {
-				q6_dsp_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		mpss_region: mpss@8000000 {
+			reg = <0x08000000 0x5100000>;
+			no-map;
 		};
 
-		modemtx-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 2>;
-
-			trips {
-				modemtx_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		mba_region: mba@d100000 {
+			reg = <0x0d100000 0x100000>;
+			no-map;
 		};
 
-		video-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 3>;
-
-			trips {
-				video_alert0: trip-point0 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		wcnss_region: wcnss@d200000 {
+			reg = <0x0d200000 0xa00000>;
+			no-map;
 		};
 
-		wlan-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 4>;
-
-			trips {
-				wlan_alert0: trip-point0 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		adsp_region: adsp@dc00000 {
+			reg = <0x0dc00000 0x1900000>;
+			no-map;
 		};
 
-		gpu-thermal-top {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 9>;
-
-			trips {
-				gpu1_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		venus_region: memory@f500000 {
+			reg = <0x0f500000 0x500000>;
+			no-map;
 		};
 
-		gpu-thermal-bottom {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 10>;
-
-			trips {
-				gpu2_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
+		smem_region: smem@fa00000 {
+			reg = <0xfa00000 0x200000>;
+			no-map;
 		};
-	};
 
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <GIC_PPI 7 0xf04>;
-	};
-
-	clocks {
-		xo_board: xo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
+		tz_region: memory@fc00000 {
+			reg = <0x0fc00000 0x160000>;
+			no-map;
 		};
 
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
+		rfsa_mem: memory@fd60000 {
+			reg = <0x0fd60000 0x20000>;
+			no-map;
 		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 2 0xf08>,
-			     <GIC_PPI 3 0xf08>,
-			     <GIC_PPI 4 0xf08>,
-			     <GIC_PPI 1 0xf08>;
-		clock-frequency = <19200000>;
-	};
-
-	adsp-pil {
-		compatible = "qcom,msm8974-adsp-pil";
-
-		interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-		cx-supply = <&pm8841_s2>;
 
-		clocks = <&xo_board>;
-		clock-names = "xo";
-
-		memory-region = <&adsp_region>;
-
-		qcom,smem-states = <&adsp_smp2p_out 0>;
-		qcom,smem-state-names = "stop";
-
-		smd-edge {
-			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&apcs 8 8>;
-			qcom,smd-edge = <1>;
+		rmtfs@fd80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0fd80000 0x180000>;
+			no-map;
 
-			label = "lpass";
+			qcom,client-id = <1>;
 		};
 	};
 
@@ -497,11 +292,25 @@
 		};
 	};
 
-	firmware {
-		scm {
-			compatible = "qcom,scm";
-			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm_requests {
+				compatible = "qcom,rpm-msm8974";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+			};
 		};
 	};
 
@@ -524,31 +333,6 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
-		qfprom: qfprom@fc4bc000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "qcom,qfprom";
-			reg = <0xfc4bc000 0x1000>;
-			tsens_calib: calib@d0 {
-				reg = <0xd0 0x18>;
-			};
-			tsens_backup: backup@440 {
-				reg = <0x440 0x10>;
-			};
-		};
-
-		tsens: thermal-sensor@fc4a9000 {
-			compatible = "qcom,msm8974-tsens";
-			reg = <0xfc4a9000 0x1000>, /* TM */
-			      <0xfc4a8000 0x1000>; /* SROT */
-			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-			nvmem-cell-names = "calib", "calib_backup";
-			#qcom,sensors = <11>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
-			#thermal-sensor-cells = <1>;
-		};
-
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -634,67 +418,79 @@
 			regulator;
 		};
 
-		acc0: clock-controller@f9088000 {
+		acc0: power-manager@f9088000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
 		};
 
-		acc1: clock-controller@f9098000 {
+		acc1: power-manager@f9098000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
 		};
 
-		acc2: clock-controller@f90a8000 {
+		acc2: power-manager@f90a8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
-		acc3: clock-controller@f90b8000 {
+		acc3: power-manager@f90b8000 {
 			compatible = "qcom,kpss-acc-v2";
 			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
 		};
 
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
-		};
+		sdhc_1: mmc@f9824900 {
+			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			bus-width = <8>;
+			non-removable;
 
-		gcc: clock-controller@fc400000 {
-			compatible = "qcom,gcc-msm8974";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0xfc400000 0x4000>;
+			status = "disabled";
 		};
 
-		tcsr: syscon@fd4a0000 {
-			compatible = "syscon";
-			reg = <0xfd4a0000 0x10000>;
-		};
+		sdhc_3: mmc@f9864900 {
+			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
+				 <&gcc GCC_SDCC3_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			bus-width = <4>;
 
-		tcsr_mutex_block: syscon@fd484000 {
-			compatible = "syscon";
-			reg = <0xfd484000 0x2000>;
-		};
+			#address-cells = <1>;
+			#size-cells = <0>;
 
-		mmcc: clock-controller@fd8c0000 {
-			compatible = "qcom,mmcc-msm8974";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0xfd8c0000 0x6000>;
+			status = "disabled";
 		};
 
-		tcsr_mutex: tcsr-mutex {
-			compatible = "qcom,tcsr-mutex";
-			syscon = <&tcsr_mutex_block 0 0x80>;
+		sdhc_2: mmc@f98a4900 {
+			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc", "core";
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			bus-width = <4>;
 
-			#hwlock-cells = <1>;
-		};
+			#address-cells = <1>;
+			#size-cells = <0>;
 
-		rpm_msg_ram: memory@fc428000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0xfc428000 0x4000>;
+			status = "disabled";
 		};
 
 		blsp1_uart1: serial@f991d000 {
@@ -712,61 +508,154 @@
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@f9923000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9923000 0x1000>;
+			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c1_default>;
+			pinctrl-1 = <&blsp1_i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c2: i2c@f9924000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9924000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c3: i2c@f9925000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9925000 0x1000>;
+			interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			pinctrl-1 = <&blsp1_i2c3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c6: i2c@f9928000 {
 			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9928000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c6_default>;
+			pinctrl-1 = <&blsp1_i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
-		blsp2_uart10: serial@f9960000 {
+		blsp2_dma: dma-controller@f9944000 {
+			compatible = "qcom,bam-v1.4.0";
+			reg = <0xf9944000 0x19000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_uart1: serial@f995d000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995d000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart1_default>;
+			pinctrl-1 = <&blsp2_uart1_sleep>;
+			status = "disabled";
+		};
+
+		blsp2_uart2: serial@f995e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995e000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp2_uart4: serial@f9960000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf9960000 0x1000>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_uart4_default>;
 			status = "disabled";
 		};
 
-		sdhci@f9824900 {
-			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_SDCC1_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
+		blsp2_i2c2: i2c@f9964000 {
 			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9964000 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c2_default>;
+			pinctrl-1 = <&blsp2_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
-		sdhci@f9864900 {
-			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC3_APPS_CLK>,
-				 <&gcc GCC_SDCC3_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
+		blsp2_i2c5: i2c@f9967000 {
 			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9967000 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c5_default>;
+			pinctrl-1 = <&blsp2_i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
-		sdhci@f98a4900 {
-			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&gcc GCC_SDCC2_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "core", "iface", "xo";
+		blsp2_i2c6: i2c@f9968000 {
 			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9968000 0x1000>;
+			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c6_default>;
+			pinctrl-1 = <&blsp2_i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
-		otg: usb@f9a55000 {
+		usb: usb@f9a55000 {
 			compatible = "qcom,ci-hdrc";
 			reg = <0xf9a55000 0x200>,
 			      <0xf9a55200 0x200>;
@@ -792,7 +681,7 @@
 					#phy-cells = <0>;
 					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
 					clock-names = "ref", "sleep";
-					resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
 					reset-names = "phy", "por";
 					status = "disabled";
 				};
@@ -803,7 +692,7 @@
 					#phy-cells = <0>;
 					clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
 					clock-names = "ref", "sleep";
-					resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
+					resets = <&gcc GCC_USB2B_PHY_BCR>, <&usb 1>;
 					reset-names = "phy", "por";
 					status = "disabled";
 				};
@@ -817,55 +706,6 @@
 			clock-names = "core";
 		};
 
-		remoteproc@fc880000 {
-			compatible = "qcom,msm8974-mss-pil";
-			reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
-			reg-names = "qdsp6", "rmb";
-
-			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
-				 <&gcc GCC_MSS_CFG_AHB_CLK>,
-				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "bus", "mem", "xo";
-
-			resets = <&gcc GCC_MSS_RESTART>;
-			reset-names = "mss_restart";
-
-			cx-supply = <&pm8841_s2>;
-			mss-supply = <&pm8841_s3>;
-			mx-supply = <&pm8841_s1>;
-			pll-supply = <&pm8941_l12>;
-
-			qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
-
-			qcom,smem-states = <&modem_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			mba {
-				memory-region = <&mba_region>;
-			};
-
-			mpss {
-				memory-region = <&mpss_region>;
-			};
-
-			smd-edge {
-				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,ipc = <&apcs 8 12>;
-				qcom,smd-edge = <0>;
-
-				label = "modem";
-			};
-		};
-
 		pronto: remoteproc@fb21b000 {
 			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
 			reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
@@ -880,8 +720,6 @@
 					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
 
-			vddpx-supply = <&pm8941_s3>;
-
 			qcom,smem-states = <&wcnss_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -892,11 +730,6 @@
 
 				clocks = <&rpmcc RPM_SMD_CXO_A2>;
 				clock-names = "xo";
-
-				vddxo-supply = <&pm8941_l6>;
-				vddrfa-supply = <&pm8941_l11>;
-				vddpa-supply = <&pm8941_l19>;
-				vdddig-supply = <&pm8941_s3>;
 			};
 
 			smd-edge {
@@ -924,139 +757,37 @@
 						interrupt-names = "tx", "rx";
 
 						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
-						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
 					};
 				};
 			};
 		};
 
-		msmgpio: pinctrl@fd510000 {
-			compatible = "qcom,msm8974-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			gpio-controller;
-			gpio-ranges = <&msmgpio 0 0 146>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		i2c@f9923000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9923000 0x1000>;
-			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@f9924000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9924000 0x1000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp_i2c3: i2c@f9925000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9925000 0x1000>;
-			interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp_i2c6: i2c@f9928000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9928000 0x1000>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp_i2c8: i2c@f9964000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9964000 0x1000>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		blsp_i2c11: i2c@f9967000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9967000 0x1000>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
-			dma-names = "tx", "rx";
+		sram@fc190000 {
+			compatible = "qcom,msm8974-rpm-stats";
+			reg = <0xfc190000 0x10000>;
 		};
 
-		blsp_i2c12: i2c@f9968000 {
-			status = "disabled";
-			compatible = "qcom,i2c-qup-v2.1.1";
-			reg = <0xf9968000 0x1000>;
-			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spmi_bus: spmi@fc4cf000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg-names = "core", "intr", "cnfg";
-			reg = <0xfc4cf000 0x1000>,
-			      <0xfc4cb000 0x1000>,
-			      <0xfc4ca000 0x1000>;
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-
-		blsp2_dma: dma-controller@f9944000 {
-			compatible = "qcom,bam-v1.4.0";
-			reg = <0xf9944000 0x19000>;
-			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		etr@fc322000 {
+		etf@fc307000 {
 			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0xfc322000 0x1000>;
+			reg = <0xfc307000 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+
 			in-ports {
 				port {
-					etr_in: endpoint {
-						remote-endpoint = <&replicator_out0>;
+					etf_in: endpoint {
+						remote-endpoint = <&merger_out>;
 					};
 				};
 			};
@@ -1078,59 +809,39 @@
 			};
 		};
 
-		replicator@fc31c000 {
-			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
-			reg = <0xfc31c000 0x1000>;
+		funnel@fc31a000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0xfc31a000 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			out-ports {
+			in-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
-					reg = <0>;
-					replicator_out0: endpoint {
-						remote-endpoint = <&etr_in>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					replicator_out1: endpoint {
-						remote-endpoint = <&tpiu_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					replicator_in: endpoint {
-						remote-endpoint = <&etf_out>;
+				/*
+				 * Not described input ports:
+				 * 0 - not-connected
+				 * 1 - connected trought funnel to Multimedia CPU
+				 * 2 - connected to Wireless CPU
+				 * 3 - not-connected
+				 * 4 - not-connected
+				 * 6 - not-connected
+				 * 7 - connected to STM
+				 */
+				port@5 {
+					reg = <5>;
+					funnel1_in5: endpoint {
+						remote-endpoint = <&kpss_out>;
 					};
 				};
 			};
-		};
-
-		etf@fc307000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0xfc307000 0x1000>;
-
-			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
 
 			out-ports {
 				port {
-					etf_out: endpoint {
-						remote-endpoint = <&replicator_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					etf_in: endpoint {
-						remote-endpoint = <&merger_out>;
+					funnel1_out: endpoint {
+						remote-endpoint = <&merger_in1>;
 					};
 				};
 			};
@@ -1170,85 +881,51 @@
 			};
 		};
 
-		funnel@fc31a000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0xfc31a000 0x1000>;
+		replicator@fc31c000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0xfc31c000 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			in-ports {
+			out-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				/*
-				 * Not described input ports:
-				 * 0 - not-connected
-				 * 1 - connected trought funnel to Multimedia CPU
-				 * 2 - connected to Wireless CPU
-				 * 3 - not-connected
-				 * 4 - not-connected
-				 * 6 - not-connected
-				 * 7 - connected to STM
-				 */
-				port@5 {
-					reg = <5>;
-					funnel1_in5: endpoint {
-						remote-endpoint = <&kpss_out>;
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&tpiu_in>;
 					};
 				};
 			};
 
-			out-ports {
+			in-ports {
 				port {
-					funnel1_out: endpoint {
-						remote-endpoint = <&merger_in1>;
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
 					};
 				};
 			};
 		};
 
-		funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0xfc345000 0x1000>;
+		etr@fc322000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0xfc322000 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
 			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					kpss_in0: endpoint {
-						remote-endpoint = <&etm0_out>;
-					};
-				};
-				port@1 {
-					reg = <1>;
-					kpss_in1: endpoint {
-						remote-endpoint = <&etm1_out>;
-					};
-				};
-				port@2 {
-					reg = <2>;
-					kpss_in2: endpoint {
-						remote-endpoint = <&etm2_out>;
-					};
-				};
-				port@3 {
-					reg = <3>;
-					kpss_in3: endpoint {
-						remote-endpoint = <&etm3_out>;
-					};
-				};
-			};
-
-			out-ports {
 				port {
-					kpss_out: endpoint {
-						remote-endpoint = <&funnel1_in5>;
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
 					};
 				};
 			};
@@ -1326,23 +1003,69 @@
 			};
 		};
 
-		ocmem@fdd00000 {
-			compatible = "qcom,msm8974-ocmem";
-			reg = <0xfdd00000 0x2000>,
-			      <0xfec00000 0x180000>;
-			reg-names = "ctrl",
-			            "mem";
-			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
-			         <&mmcc OCMEMCX_OCMEMNOC_CLK>;
-			clock-names = "core",
-			              "iface";
+		/* KPSS funnel, only 4 inputs are used */
+		funnel@fc345000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0xfc345000 0x1000>;
 
-			#address-cells = <1>;
-			#size-cells = <1>;
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
 
-			gmu_sram: gmu-sram@0 {
-				reg = <0x0 0x100000>;
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					kpss_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					kpss_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					kpss_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+				port@3 {
+					reg = <3>;
+					kpss_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
 			};
+
+			out-ports {
+				port {
+					kpss_out: endpoint {
+						remote-endpoint = <&funnel1_in5>;
+					};
+				};
+			};
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8974";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x4000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>;
+			clock-names = "xo",
+				      "sleep_clk";
+		};
+
+		rpm_msg_ram: sram@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
 		};
 
 		bimc: interconnect@fc380000 {
@@ -1399,94 +1122,777 @@
 			         <&rpmcc RPM_SMD_CNOC_A_CLK>;
 		};
 
-		gpu: adreno@fdb00000 {
+		tsens: thermal-sensor@fc4a9000 {
+			compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
+			reg = <0xfc4a9000 0x1000>, /* TM */
+			      <0xfc4a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_use_backup>,
+				      <&tsens_mode_backup>,
+				      <&tsens_base1_backup>, <&tsens_base2_backup>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>,
+				      <&tsens_s10_p1>, <&tsens_s10_p2>,
+				      <&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>,
+				      <&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>,
+				      <&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>,
+				      <&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>,
+				      <&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>,
+				      <&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>,
+				      <&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>,
+				      <&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>,
+				      <&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>,
+				      <&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>,
+				      <&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "use_backup",
+					   "mode_backup",
+					   "base1_backup", "base2_backup",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2",
+					   "s10_p1", "s10_p2",
+					   "s0_p1_backup", "s0_p2_backup",
+					   "s1_p1_backup", "s1_p2_backup",
+					   "s2_p1_backup", "s2_p2_backup",
+					   "s3_p1_backup", "s3_p2_backup",
+					   "s4_p1_backup", "s4_p2_backup",
+					   "s5_p1_backup", "s5_p2_backup",
+					   "s6_p1_backup", "s6_p2_backup",
+					   "s7_p1_backup", "s7_p2_backup",
+					   "s8_p1_backup", "s8_p2_backup",
+					   "s9_p1_backup", "s9_p2_backup",
+					   "s10_p1_backup", "s10_p2_backup";
+			#qcom,sensors = <11>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		qfprom: qfprom@fc4bc000 {
+			compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@d0 {
+				reg = <0xd0 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p1: s0-p1@d1 {
+				reg = <0xd1 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s1_p1: s1-p1@d2 {
+				reg = <0xd1 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s2_p1: s2-p1@d2 {
+				reg = <0xd2 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p1: s3-p1@d3 {
+				reg = <0xd3 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p1: s4-p1@d4 {
+				reg = <0xd4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p1: s5-p1@d4 {
+				reg = <0xd4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1: s6-p1@d5 {
+				reg = <0xd5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s7_p1: s7-p1@d6 {
+				reg = <0xd6 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s8_p1: s8-p1@d7 {
+				reg = <0xd7 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_mode: mode@d7 {
+				reg = <0xd7 0x1>;
+				bits = <6 2>;
+			};
+
+			tsens_s9_p1: s9-p1@d8 {
+				reg = <0xd8 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s10_p1: s10_p1@d8 {
+				reg = <0xd8 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_base2: base2@d9 {
+				reg = <0xd9 0x2>;
+				bits = <4 8>;
+			};
+
+			tsens_s0_p2: s0-p2@da {
+				reg = <0xda 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s1_p2: s1-p2@db {
+				reg = <0xdb 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s2_p2: s2-p2@dc {
+				reg = <0xdc 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s3_p2: s3-p2@dc {
+				reg = <0xdc 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s4_p2: s4-p2@dd {
+				reg = <0xdd 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s5_p2: s5-p2@de {
+				reg = <0xde 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s6_p2: s6-p2@df {
+				reg = <0xdf 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2: s7-p2@e0 {
+				reg = <0xe0 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s8_p2: s8-p2@e0 {
+				reg = <0xe0 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s9_p2: s9-p2@e1 {
+				reg = <0xe1 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s10_p2: s10_p2@e2 {
+				reg = <0xe2 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s5_p2_backup: s5-p2_backup@e3 {
+				reg = <0xe3 0x2>;
+				bits = <0 6>;
+			};
+
+			tsens_mode_backup: mode_backup@e3 {
+				reg = <0xe3 0x1>;
+				bits = <6 2>;
+			};
+
+			tsens_s6_p2_backup: s6-p2_backup@e4 {
+				reg = <0xe4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2_backup: s7-p2_backup@e4 {
+				reg = <0xe4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s8_p2_backup: s8-p2_backup@e5 {
+				reg = <0xe5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s9_p2_backup: s9-p2_backup@e6 {
+				reg = <0xe6 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s10_p2_backup: s10_p2_backup@e7 {
+				reg = <0xe7 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_base1_backup: base1_backup@440 {
+				reg = <0x440 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p1_backup: s0-p1_backup@441 {
+				reg = <0x441 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s1_p1_backup: s1-p1_backup@442 {
+				reg = <0x441 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s2_p1_backup: s2-p1_backup@442 {
+				reg = <0x442 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p1_backup: s3-p1_backup@443 {
+				reg = <0x443 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p1_backup: s4-p1_backup@444 {
+				reg = <0x444 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p1_backup: s5-p1_backup@444 {
+				reg = <0x444 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1_backup: s6-p1_backup@445 {
+				reg = <0x445 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s7_p1_backup: s7-p1_backup@446 {
+				reg = <0x446 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_use_backup: use_backup@447 {
+				reg = <0x447 0x1>;
+				bits = <5 3>;
+			};
+
+			tsens_s8_p1_backup: s8-p1_backup@448 {
+				reg = <0x448 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s9_p1_backup: s9-p1_backup@448 {
+				reg = <0x448 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s10_p1_backup: s10_p1_backup@449 {
+				reg = <0x449 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_base2_backup: base2_backup@44a {
+				reg = <0x44a 0x2>;
+				bits = <2 8>;
+			};
+
+			tsens_s0_p2_backup: s0-p2_backup@44b {
+				reg = <0x44b 0x3>;
+				bits = <2 6>;
+			};
+
+			tsens_s1_p2_backup: s1-p2_backup@44c {
+				reg = <0x44c 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s2_p2_backup: s2-p2_backup@44c {
+				reg = <0x44c 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s3_p2_backup: s3-p2_backup@44d {
+				reg = <0x44d 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s4_p2_backup: s4-p2_backup@44e {
+				reg = <0x44e 0x1>;
+				bits = <2 6>;
+			};
+		};
+
+		spmi_bus: spmi@fc4cf000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg-names = "core", "intr", "cnfg";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bam_dmux_dma: dma-controller@fc834000 {
+			compatible = "qcom,bam-v1.4.0";
+			reg = <0xfc834000 0x7000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+		};
+
+		remoteproc_mss: remoteproc@fc880000 {
+			compatible = "qcom,msm8974-mss-pil";
+			reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "bus", "mem", "xo";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			qcom,halt-regs = <&tcsr_mutex 0x1180 0x1200 0x1280>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
 			status = "disabled";
 
-			compatible = "qcom,adreno-330.1",
-				     "qcom,adreno";
-			reg = <0xfdb00000 0x10000>;
-			reg-names = "kgsl_3d0_reg_memory";
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "kgsl_3d0_irq";
-			clock-names = "core",
-				      "iface",
-				      "mem_iface";
-			clocks = <&mmcc OXILI_GFX3D_CLK>,
-				 <&mmcc OXILICX_AHB_CLK>,
-				 <&mmcc OXILICX_AXI_CLK>;
-			sram = <&gmu_sram>;
-			power-domains = <&mmcc OXILICX_GDSC>;
-			operating-points-v2 = <&gpu_opp_table>;
+			mba {
+				memory-region = <&mba_region>;
+			};
 
-			interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
-					<&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
-			interconnect-names = "gfx-mem",
-					     "ocmem";
+			mpss {
+				memory-region = <&mpss_region>;
+			};
 
-			// iommus = <&gpu_iommu 0>;
+			bam_dmux: bam-dmux {
+				compatible = "qcom,bam-dmux";
 
-			gpu_opp_table: opp_table {
-				compatible = "operating-points-v2";
+				interrupt-parent = <&modem_smsm>;
+				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+				interrupt-names = "pc", "pc-ack";
 
-				opp-320000000 {
-					opp-hz = /bits/ 64 <320000000>;
+				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+				qcom,smem-state-names = "pc", "pc-ack";
+
+				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+				dma-names = "tx", "rx";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 12>;
+				qcom,smd-edge = <0>;
+
+				label = "modem";
+			};
+		};
+
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,msm8974-tcsr-mutex", "qcom,tcsr-mutex", "syscon";
+			reg = <0xfd484000 0x2000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@fd4a0000 {
+			compatible = "qcom,tcsr-msm8974", "syscon";
+			reg = <0xfd4a0000 0x10000>;
+		};
+
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8974-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+			sdc1_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
 				};
 
-				opp-200000000 {
-					opp-hz = /bits/ 64 <200000000>;
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
 				};
 
-				opp-27000000 {
-					opp-hz = /bits/ 64 <27000000>;
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
 				};
 			};
-		};
 
-		mdss: mdss@fd900000 {
-			status = "disabled";
+			sdc2_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				cd-pins {
+					pins = "gpio54";
+					function = "gpio";
+					bias-disable;
+					drive-strength = <2>;
+				};
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				rx-pins {
+					pins = "gpio5";
+					function = "blsp_uart2";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				tx-pins {
+					pins = "gpio4";
+					function = "blsp_uart2";
+					drive-strength = <4>;
+					bias-disable;
+				};
+			};
+
+			blsp2_uart1_default: blsp2-uart1-default-state {
+				tx-rts-pins {
+					pins = "gpio41", "gpio44";
+					function = "blsp_uart7";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-cts-pins {
+					pins = "gpio42", "gpio43";
+					function = "blsp_uart7";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			blsp2_uart1_sleep: blsp2-uart1-sleep-state {
+				pins = "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_uart4_default: blsp2-uart4-default-state {
+				tx-rts-pins {
+					pins = "gpio53", "gpio56";
+					function = "blsp_uart10";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-cts-pins {
+					pins = "gpio54", "gpio55";
+					function = "blsp_uart10";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			blsp1_i2c1_default: blsp1-i2c1-default-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c1_sleep: blsp1-i2c1-sleep-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
 
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			/* BLSP1_I2C4 info is missing */
+
+			/* BLSP1_I2C5 info is missing */
+
+			blsp1_i2c6_default: blsp1-i2c6-default-state {
+				pins = "gpio29", "gpio30";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
+				pins = "gpio29", "gpio30";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+			/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
+
+			/* BLSP2_I2C1 info is missing */
+
+			blsp2_i2c2_default: blsp2-i2c2-default-state {
+				pins = "gpio47", "gpio48";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
+				pins = "gpio47", "gpio48";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			/* BLSP2_I2C3 info is missing */
+
+			/* BLSP2_I2C4 info is missing */
+
+			blsp2_i2c5_default: blsp2-i2c5-default-state {
+				pins = "gpio83", "gpio84";
+				function = "blsp_i2c11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
+				pins = "gpio83", "gpio84";
+				function = "blsp_i2c11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_i2c6_default: blsp2-i2c6-default-state {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci_default: cci-default-state {
+				cci_i2c0_default: cci-i2c0-default-pins {
+					pins = "gpio19", "gpio20";
+					function = "cci_i2c0";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cci_i2c1_default: cci-i2c1-default-pins {
+					pins = "gpio21", "gpio22";
+					function = "cci_i2c1";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cci_sleep: cci-sleep-state {
+				cci_i2c0_sleep: cci-i2c0-sleep-pins {
+					pins = "gpio19", "gpio20";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cci_i2c1_sleep: cci-i2c1-sleep-pins {
+					pins = "gpio21", "gpio22";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			spi8_default: spi8_default-state {
+				mosi-pins {
+					pins = "gpio45";
+					function = "blsp_spi8";
+				};
+				miso-pins {
+					pins = "gpio46";
+					function = "blsp_spi8";
+				};
+				cs-pins {
+					pins = "gpio47";
+					function = "blsp_spi8";
+				};
+				clk-pins {
+					pins = "gpio48";
+					function = "blsp_spi8";
+				};
+			};
+		};
+
+		mmcc: clock-controller@fd8c0000 {
+			compatible = "qcom,mmcc-msm8974";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfd8c0000 0x6000>;
+			clocks = <&xo_board>,
+				 <&gcc GCC_MMSS_GPLL0_CLK_SRC>,
+				 <&gcc GPLL0_VOTE>,
+				 <&gcc GPLL1_VOTE>,
+				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
+				 <&dsi0_phy 1>,
+				 <&dsi0_phy 0>,
+				 <&dsi1_phy 1>,
+				 <&dsi1_phy 0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "xo",
+				      "mmss_gpll0_vote",
+				      "gpll0_vote",
+				      "gpll1_vote",
+				      "gfx3d_clk_src",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "hdmipll",
+				      "edp_link_clk",
+				      "edp_vco_div";
+		};
+
+		mdss: display-subsystem@fd900000 {
 			compatible = "qcom,mdss";
-			reg = <0xfd900000 0x100>,
-			      <0xfd924000 0x1000>;
-			reg-names = "mdss_phys",
-			            "vbif_phys";
+			reg = <0xfd900000 0x100>, <0xfd924000 0x1000>;
+			reg-names = "mdss_phys", "vbif_phys";
 
 			power-domains = <&mmcc MDSS_GDSC>;
 
 			clocks = <&mmcc MDSS_AHB_CLK>,
-			         <&mmcc MDSS_AXI_CLK>,
-			         <&mmcc MDSS_VSYNC_CLK>;
-			clock-names = "iface",
-			              "bus",
-			              "vsync";
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>;
+			clock-names = "iface", "bus", "vsync";
 
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
+			status = "disabled";
+
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 
-			mdp: mdp@fd900000 {
-				status = "disabled";
-
-				compatible = "qcom,mdp5";
+			mdp: display-controller@fd900000 {
+				compatible = "qcom,msm8974-mdp5", "qcom,mdp5";
 				reg = <0xfd900100 0x22000>;
 				reg-names = "mdp_phys";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 0>;
+				interrupts = <0>;
 
 				clocks = <&mmcc MDSS_AHB_CLK>,
 					 <&mmcc MDSS_AXI_CLK>,
 					 <&mmcc MDSS_MDP_CLK>,
 					 <&mmcc MDSS_VSYNC_CLK>;
-				clock-names = "iface",
-				              "bus",
-				              "core",
-				              "vsync";
+				clock-names = "iface", "bus", "core", "vsync";
 
 				interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
 				interconnect-names = "mdp0-mem";
@@ -1501,41 +1907,49 @@
 							remote-endpoint = <&dsi0_in>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+						mdp5_intf2_out: endpoint {
+							remote-endpoint = <&dsi1_in>;
+						};
+					};
 				};
 			};
 
 			dsi0: dsi@fd922800 {
-				status = "disabled";
-
-				compatible = "qcom,mdss-dsi-ctrl";
+				compatible = "qcom,msm8974-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
 				reg = <0xfd922800 0x1f8>;
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <4>;
 
-				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
-				                  <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&dsi_phy0 0>,
-				                         <&dsi_phy0 1>;
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
 
 				clocks = <&mmcc MDSS_MDP_CLK>,
-				         <&mmcc MDSS_AHB_CLK>,
-				         <&mmcc MDSS_AXI_CLK>,
-				         <&mmcc MDSS_BYTE0_CLK>,
-				         <&mmcc MDSS_PCLK0_CLK>,
-				         <&mmcc MDSS_ESC0_CLK>,
-				         <&mmcc MMSS_MISC_AHB_CLK>;
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_BYTE0_CLK>,
+					 <&mmcc MDSS_PCLK0_CLK>,
+					 <&mmcc MDSS_ESC0_CLK>,
+					 <&mmcc MMSS_MISC_AHB_CLK>;
 				clock-names = "mdp_core",
-				              "iface",
-				              "bus",
-				              "byte",
-				              "pixel",
-				              "core",
-				              "core_mmss";
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core",
+					      "core_mmss";
 
-				phys = <&dsi_phy0>;
-				phy-names = "dsi-phy";
+				phys = <&dsi0_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
 
 				ports {
 					#address-cells = <1>;
@@ -1556,29 +1970,222 @@
 				};
 			};
 
-			dsi_phy0: dsi-phy@fd922a00 {
-				status = "disabled";
-
+			dsi0_phy: phy@fd922a00 {
 				compatible = "qcom,dsi-phy-28nm-hpm";
 				reg = <0xfd922a00 0xd4>,
 				      <0xfd922b00 0x280>,
 				      <0xfd922d80 0x30>;
 				reg-names = "dsi_pll",
-				            "dsi_phy",
-				            "dsi_phy_regulator";
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			dsi1: dsi@fd922e00 {
+				compatible = "qcom,msm8974-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0xfd922e00 0x1f8>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_BYTE1_CLK>,
+					 <&mmcc MDSS_PCLK1_CLK>,
+					 <&mmcc MDSS_ESC1_CLK>,
+					 <&mmcc MMSS_MISC_AHB_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core",
+					      "core_mmss";
+
+				phys = <&dsi1_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi1_in: endpoint {
+							remote-endpoint = <&mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi1_phy: phy@fd923000 {
+				compatible = "qcom,dsi-phy-28nm-hpm";
+				reg = <0xfd923000 0xd4>,
+				      <0xfd923100 0x280>,
+				      <0xfd923380 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
 
 				#clock-cells = <1>;
 				#phy-cells = <0>;
-				qcom,dsi-phy-index = <0>;
 
-				clocks = <&mmcc MDSS_AHB_CLK>;
-				clock-names = "iface";
+				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
 			};
 		};
 
-		imem@fe805000 {
+		cci: cci@fda0c000 {
+			compatible = "qcom,msm8974-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfda0c000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CCI_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci_default>;
+			pinctrl-1 = <&cci_sleep>;
+
 			status = "disabled";
-			compatible = "syscon", "simple-mfd";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <100000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <100000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gpu: adreno@fdb00000 {
+			compatible = "qcom,adreno-330.1", "qcom,adreno";
+			reg = <0xfdb00000 0x10000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+
+			clocks = <&mmcc OXILI_GFX3D_CLK>,
+				 <&mmcc OXILICX_AHB_CLK>,
+				 <&mmcc OXILICX_AXI_CLK>;
+			clock-names = "core", "iface", "mem_iface";
+
+			sram = <&gmu_sram>;
+			power-domains = <&mmcc OXILICX_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
+					<&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
+			interconnect-names = "gfx-mem", "ocmem";
+
+			// iommus = <&gpu_iommu 0>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+				};
+
+				opp-27000000 {
+					opp-hz = /bits/ 64 <27000000>;
+				};
+			};
+		};
+
+		sram@fdd00000 {
+			compatible = "qcom,msm8974-ocmem";
+			reg = <0xfdd00000 0x2000>,
+			      <0xfec00000 0x180000>;
+			reg-names = "ctrl", "mem";
+			ranges = <0 0xfec00000 0x180000>;
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+				 <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+			clock-names = "core", "iface";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gmu_sram: gmu-sram@0 {
+				reg = <0x0 0x100000>;
+			};
+		};
+
+		remoteproc_adsp: remoteproc@fe200000 {
+			compatible = "qcom,msm8974-adsp-pil";
+			reg = <0xfe200000 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			clocks = <&xo_board>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_region>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			smd-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 8>;
+				qcom,smd-edge = <1>;
+				label = "lpass";
+			};
+		};
+
+		imem: sram@fe805000 {
+			compatible = "qcom,msm8974-imem", "syscon", "simple-mfd";
 			reg = <0xfe805000 0x1000>;
 
 			reboot-mode {
@@ -1588,76 +2195,187 @@
 		};
 	};
 
-	smd {
-		compatible = "qcom,smd";
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
 
-		rpm {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
+			thermal-sensors = <&tsens 5>;
 
-			rpm_requests {
-				compatible = "qcom,rpm-msm8974";
-				qcom,smd-channels = "rpm_requests";
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
 
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
-					#clock-cells = <1>;
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				q6_dsp_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modemtx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				modemtx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
 				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
 
-				pm8841-regulators {
-					compatible = "qcom,rpm-pm8841-regulators";
-
-					pm8841_s1: s1 {};
-					pm8841_s2: s2 {};
-					pm8841_s3: s3 {};
-					pm8841_s4: s4 {};
-					pm8841_s5: s5 {};
-					pm8841_s6: s6 {};
-					pm8841_s7: s7 {};
-					pm8841_s8: s8 {};
-				};
-
-				pm8941-regulators {
-					compatible = "qcom,rpm-pm8941-regulators";
-
-					pm8941_s1: s1 {};
-					pm8941_s2: s2 {};
-					pm8941_s3: s3 {};
-
-					pm8941_l1: l1 {};
-					pm8941_l2: l2 {};
-					pm8941_l3: l3 {};
-					pm8941_l4: l4 {};
-					pm8941_l5: l5 {};
-					pm8941_l6: l6 {};
-					pm8941_l7: l7 {};
-					pm8941_l8: l8 {};
-					pm8941_l9: l9 {};
-					pm8941_l10: l10 {};
-					pm8941_l11: l11 {};
-					pm8941_l12: l12 {};
-					pm8941_l13: l13 {};
-					pm8941_l14: l14 {};
-					pm8941_l15: l15 {};
-					pm8941_l16: l16 {};
-					pm8941_l17: l17 {};
-					pm8941_l18: l18 {};
-					pm8941_l19: l19 {};
-					pm8941_l20: l20 {};
-					pm8941_l21: l21 {};
-					pm8941_l22: l22 {};
-					pm8941_l23: l23 {};
-					pm8941_l24: l24 {};
-
-					pm8941_lvs1: lvs1 {};
-					pm8941_lvs2: lvs2 {};
-					pm8941_lvs3: lvs3 {};
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
 				};
 			};
 		};
 	};
 
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 2 0xf08>,
+			     <GIC_PPI 3 0xf08>,
+			     <GIC_PPI 4 0xf08>,
+			     <GIC_PPI 1 0xf08>;
+		clock-frequency = <19200000>;
+	};
+
 	vreg_boost: vreg-boost {
 		compatible = "regulator-fixed";
 
@@ -1674,6 +2392,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&boost_bypass_n_pin>;
 	};
+
 	vreg_vph_pwr: vreg-vph-pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "vph-pwr";
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
new file mode 100644
index 000000000000..f531d2679f6c
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
@@ -0,0 +1,463 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Fairphone 2";
+	compatible = "fairphone,fp2", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&pm8941_l18>;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	touchscreen@41 {
+		compatible = "ilitek,ili2120";
+		reg = <0x41>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&imem {
+	reboot-mode {
+		mode-normal = <0x77665501>;
+		mode-bootloader = <0x77665500>;
+		mode-recovery = <0x77665502>;
+	};
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio1", "gpio2", "gpio5";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
+};
+
+&pm8941_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@7 {
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pronto {
+	status = "okay";
+
+	vddmx-supply = <&pm8841_s1>;
+	vddcx-supply = <&pm8841_s2>;
+	vddpx-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&wcnss_pin_a>;
+
+	iris {
+		vddxo-supply = <&pm8941_l6>;
+		vddrfa-supply = <&pm8941_l11>;
+		vddpa-supply = <&pm8941_l19>;
+		vdddig-supply = <&pm8941_s3>;
+	};
+
+	smd-edge {
+		qcom,remote-pid = <4>;
+		label = "pronto";
+
+		wcnss {
+			status = "okay";
+		};
+	};
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	cx-supply = <&pm8841_s2>;
+};
+
+&remoteproc_mss {
+	status = "okay";
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l13>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+};
+
+&smbb {
+	usb-charge-current-limit = <1500000>;
+	qcom,fast-charge-safe-current = <1500000>;
+	qcom,fast-charge-current-limit = <1500000>;
+	qcom,fast-charge-safe-voltage = <4380000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4240000>;
+	qcom,minimum-input-voltage = <4450000>;
+};
+
+&tlmm {
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	wcnss_pin_a: wcnss-pin-active-state {
+		wlan-pins {
+			pins =  "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+			function = "wlan";
+
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		bt-pins {
+			pins = "gpio35", "gpio43", "gpio44";
+			function = "bt";
+
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		fm-pins {
+			pins = "gpio41", "gpio42";
+			function = "fm";
+
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
new file mode 100644
index 000000000000..8d2a054d8fee
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts
@@ -0,0 +1,513 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "OnePlus One";
+	compatible = "oneplus,bacon", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+	qcom,msm-id = <194 0x10000>;
+	qcom,board-id = <8 0>;
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>, <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			debounce-interval = <150>;
+		};
+	};
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+		power-supplies = <&bq24196_charger>;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	rmi4-i2c-dev@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		syna,startup-delay-ms = <100>;
+
+		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&pm8941_l22>;
+		vio-supply = <&pm8941_lvs3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_default_state>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			/*
+			 * Touchscreen size is 2040x1080, y-values between
+			 * 1920-2040 are used for touchkey (menu, home & back).
+			 * For now clip it off so we don't get touch events
+			 * outside of the display area.
+			 */
+			syna,clip-y-high = <1920>;
+		};
+	};
+
+	led-controller@36 {
+		compatible = "ti,lm3630a";
+		reg = <0x36>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0 1>;
+			label = "lcd-backlight";
+			default-brightness = <80>;
+		};
+	};
+
+	led-controller@68 {
+		compatible = "si-en,sn3193";
+		reg = <0x68>;
+
+		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			label = "red:status";
+			led-max-microamp = <17500>;
+		};
+
+		led@2 {
+			reg = <2>;
+			label = "green:status";
+			led-max-microamp = <17500>;
+		};
+
+		led@3 {
+			reg = <3>;
+			label = "blue:status";
+			led-max-microamp = <17500>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	bq24196_charger: charger@6b {
+		compatible = "ti,bq24196";
+		reg = <0x6b>;
+		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+		omit-battery-class;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&gcc {
+	compatible = "qcom,gcc-msm8974pro-ac";
+};
+
+&pm8941_coincell {
+	qcom,rset-ohms = <800>;
+	qcom,vset-millivolts = <3200>;
+
+	status = "okay";
+};
+
+&pm8941_gpios {
+	gpio_keys_default: gpio-keys-active-state {
+		pins = "gpio2", "gpio5";
+		function = "normal";
+		input-enable;
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+};
+
+&pm8941_vib {
+	status = "okay";
+};
+
+&pronto {
+	vddmx-supply = <&pm8841_s1>;
+	vddcx-supply = <&pm8841_s2>;
+	vddpx-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&wcnss_pin_a>;
+
+	status = "okay";
+
+	iris {
+		vddxo-supply = <&pm8941_l6>;
+		vddrfa-supply = <&pm8941_l11>;
+		vddpa-supply = <&pm8941_l19>;
+		vdddig-supply = <&pm8941_s3>;
+	};
+
+	smd-edge {
+		qcom,remote-pid = <4>;
+		label = "pronto";
+
+		wcnss {
+			status = "okay";
+		};
+	};
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <875000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <154000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <3350000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-allow-set-load;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+
+			regulator-boot-on;
+		};
+
+		pm8941_lvs3: lvs3 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio68";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <4>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+	};
+
+	touch_default_state: touch-default-state {
+		int-pins {
+			pins = "gpio61";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			input-enable;
+		};
+
+		reset-pins {
+			pins = "gpio60";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	wcnss_pin_a: wcnss-pin-active-state {
+		wlan-pins {
+			pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+			function = "wlan";
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		bt-pins {
+			pins = "gpio35", "gpio43", "gpio44";
+			function = "bt";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
+
+&usb {
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
new file mode 100644
index 000000000000..b9698ffb66ca
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
@@ -0,0 +1,814 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pma8084.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Samsung Galaxy S5";
+	compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_3; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		key-home {
+			label = "home_key";
+			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	i2c-gpio-touchkey {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_touchkey_pins>;
+
+		touchkey@20 {
+			compatible = "cypress,tm2-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&pma8084_gpios>;
+			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&touchkey_pin>;
+
+			vcc-supply = <&max77826_ldo15>;
+			vdd-supply = <&pma8084_l19>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+		};
+	};
+
+	i2c-gpio-led {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_led_gpioex_pins>;
+
+		i2c-gpio,delay-us = <2>;
+
+		gpio_expander: gpio@20 {
+			compatible = "nxp,pcal6416";
+			reg = <0x20>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			vcc-supply = <&pma8084_s4>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpioex_pin>;
+
+			reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+		};
+
+		led-controller@30 {
+			compatible = "panasonic,an30259a";
+			reg = <0x30>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@2 {
+				reg = <2>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@3 {
+				reg = <3>;
+				function = LED_FUNCTION_STATUS;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vreg_panel: panel-regulator {
+		compatible = "regulator-fixed";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_en_pin>;
+
+		regulator-name = "panel-vddr-reg";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	/delete-node/ vreg-boost;
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+
+		interrupt-parent = <&pma8084_gpios>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&max77826_ldo13>;
+		vio-supply = <&pma8084_lvs2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pin>;
+
+		syna,startup-delay-ms = <100>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	pmic@60 {
+		reg = <0x60>;
+		compatible = "maxim,max77826";
+
+		regulators {
+			max77826_ldo1: LDO1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			max77826_ldo2: LDO2 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			max77826_ldo3: LDO3 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			max77826_ldo4: LDO4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo5: LDO5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo6: LDO6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo7: LDO7 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo8: LDO8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo9: LDO9 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_ldo10: LDO10 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2950000>;
+			};
+
+			max77826_ldo11: LDO11 {
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2950000>;
+			};
+
+			max77826_ldo12: LDO12 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo13: LDO13 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo14: LDO14 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			max77826_ldo15: LDO15 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			max77826_buck: BUCK {
+				regulator-min-microvolt = <1225000>;
+				regulator-max-microvolt = <1225000>;
+			};
+
+			max77826_buckboost: BUCKBOOST {
+				regulator-min-microvolt = <3400000>;
+				regulator-max-microvolt = <3400000>;
+			};
+		};
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c6 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max17048";
+		reg = <0x36>;
+
+		maxim,double-soc;
+		maxim,rcomp = /bits/ 8 <0x56>;
+
+		interrupt-parent = <&pma8084_gpios>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fuelgauge_pin>;
+	};
+};
+
+&blsp2_uart2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_pins_active>;
+	pinctrl-1 = <&blsp2_uart2_pins_sleep>;
+
+	bluetooth {
+		compatible = "brcm,bcm43540-bt";
+		max-speed = <3000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+		device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+	};
+};
+
+&dsi0 {
+	status = "okay";
+
+	vdda-supply = <&pma8084_l2>;
+	vdd-supply = <&pma8084_l22>;
+	vddio-supply = <&pma8084_l12>;
+
+	panel: panel@0 {
+		reg = <0>;
+		compatible = "samsung,s6e3fa2";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
+
+		iovdd-supply = <&pma8084_lvs4>;
+		vddr-supply = <&vreg_panel>;
+
+		reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
+		te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+};
+
+&dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+	status = "okay";
+
+	vddio-supply = <&pma8084_l12>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&pma8084_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio3", "gpio5";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	touchkey_pin: touchkey-int-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	touch_pin: touchscreen-int-state {
+		pins = "gpio8";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+
+	panel_en_pin: panel-en-state {
+		pins = "gpio14";
+		function = "normal";
+		bias-pull-up;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+
+	wlan_sleep_clk_pin: wlan-sleep-clk-state {
+		pins = "gpio16";
+		function = "func2";
+
+		output-high;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+
+	panel_rst_pin: panel-rst-state {
+		pins = "gpio17";
+		function = "normal";
+		bias-disable;
+		power-source = <PMA8084_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+
+	fuelgauge_pin: fuelgauge-int-state {
+		pins = "gpio21";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PMA8084_GPIO_S4>;
+	};
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	cx-supply = <&pma8084_s2>;
+};
+
+&remoteproc_mss {
+	status = "okay";
+	cx-supply = <&pma8084_s2>;
+	mss-supply = <&pma8084_s6>;
+	mx-supply = <&pma8084_s1>;
+	pll-supply = <&pma8084_l12>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pma8084-regulators";
+
+		pma8084_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
+
+		pma8084_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pma8084_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pma8084_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pma8084_s6: s6 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pma8084_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pma8084_l3: l3 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pma8084_l4: l4 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pma8084_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pma8084_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pma8084_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pma8084_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pma8084_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pma8084_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pma8084_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pma8084_l19: l19 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pma8084_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pma8084_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <200000>;
+			regulator-allow-set-load;
+		};
+
+		pma8084_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pma8084_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pma8084_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pma8084_l25: l25 {
+			regulator-min-microvolt = <2100000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		pma8084_l26: l26 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pma8084_l27: l27 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pma8084_lvs1: lvs1 {};
+		pma8084_lvs2: lvs2 {};
+		pma8084_lvs3: lvs3 {};
+		pma8084_lvs4: lvs4 {};
+
+		pma8084_5vs1: 5vs1 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pma8084_l20>;
+	vqmmc-supply = <&pma8084_s4>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+	max-frequency = <100000000>;
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pma8084_s4>;
+	non-removable;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+
+	wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
+	};
+};
+
+&sdhc_3 {
+	status = "okay";
+	max-frequency = <100000000>;
+	vmmc-supply = <&pma8084_l21>;
+	vqmmc-supply = <&pma8084_l13>;
+
+	/*
+	 * cd-gpio is intentionally disabled. If enabled, an SD card
+	 * present during boot is not initialized correctly. Without
+	 * cd-gpios the driver resorts to polling, so hotplug works.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
+	/* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
+};
+
+&tlmm {
+	/* This seems suspicious, but somebody with this device should look into it. */
+	blsp2_uart2_pins_active: blsp2-uart2-pins-active-state {
+		pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		function = "blsp_uart8";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state {
+		pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	bt_pins: bt-pins-state {
+		hostwake-pins {
+			pins = "gpio75";
+			function = "gpio";
+			drive-strength = <16>;
+			input-enable;
+		};
+
+		devwake-pins {
+			pins = "gpio91";
+			function = "gpio";
+			drive-strength = <2>;
+		};
+	};
+
+	sdc1_on: sdhc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <4>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+	};
+
+	sdc3_on: sdc3-on-state {
+		pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+		function = "sdc3";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sdhc3_cd_pin: sdc3-cd-on-state {
+		pins = "gpio62";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_on: sdhc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	i2c_touchkey_pins: i2c-touchkey-state {
+		pins = "gpio95", "gpio96";
+		function = "gpio";
+		input-enable;
+		bias-pull-up;
+	};
+
+	i2c_led_gpioex_pins: i2c-led-gpioex-state {
+		pins = "gpio120", "gpio121";
+		function = "gpio";
+		input-enable;
+		bias-pull-down;
+	};
+
+	gpioex_pin: gpioex-state {
+		pins = "gpio145";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	wifi_pin: wifi-state {
+		pins = "gpio92";
+		function = "gpio";
+		input-enable;
+		bias-pull-down;
+	};
+
+	panel_te_pin: panel-state {
+		pins = "gpio12";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pma8084_l6>;
+	v3p3-supply = <&pma8084_l24>;
+
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
new file mode 100644
index 000000000000..04bc58d87abf
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -0,0 +1,674 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Sony Xperia Z2 Tablet";
+	compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "tablet";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+		serial1 = &blsp2_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		key-volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	vreg_bl_vddio: lcd-backlight-vddio {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bl_vddio";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		gpio = <&tlmm 69 0>;
+		enable-active-high;
+
+		vin-supply = <&pm8941_s3>;
+		startup-delay-us = <70000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_backlight_en_pin_a>;
+	};
+
+	vreg_vsp: lcd-dcdc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_vsp";
+		regulator-min-microvolt = <5600000>;
+		regulator-max-microvolt = <5600000>;
+
+		gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_dcdc_en_pin_a>;
+	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_pin>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c2 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	synaptics@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&pm8941_l22>;
+		vio-supply = <&pm8941_lvs3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_pin>;
+
+		syna,startup-delay-ms = <100>;
+
+		rmi-f01@1 {
+			reg = <0x1>;
+			syna,nosleep = <1>;
+		};
+
+		rmi-f11@11 {
+			reg = <0x11>;
+			syna,f11-flip-x = <1>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	lp8566_wled: backlight@2c {
+		compatible = "ti,lp8556";
+		reg = <0x2c>;
+		power-supply = <&vreg_bl_vddio>;
+
+		bl-name = "backlight";
+		dev-ctrl = /bits/ 8 <0x05>;
+		init-brt = /bits/ 8 <0x3f>;
+		rom_a0h {
+			rom-addr = /bits/ 8 <0xa0>;
+			rom-val = /bits/ 8 <0xff>;
+		};
+		rom_a1h {
+			rom-addr = /bits/ 8 <0xa1>;
+			rom-val = /bits/ 8 <0x3f>;
+		};
+		rom_a2h {
+			rom-addr = /bits/ 8 <0xa2>;
+			rom-val = /bits/ 8 <0x20>;
+		};
+		rom_a3h {
+			rom-addr = /bits/ 8 <0xa3>;
+			rom-val = /bits/ 8 <0x5e>;
+		};
+		rom_a4h {
+			rom-addr = /bits/ 8 <0xa4>;
+			rom-val = /bits/ 8 <0x02>;
+		};
+		rom_a5h {
+			rom-addr = /bits/ 8 <0xa5>;
+			rom-val = /bits/ 8 <0x04>;
+		};
+		rom_a6h {
+			rom-addr = /bits/ 8 <0xa6>;
+			rom-val = /bits/ 8 <0x80>;
+		};
+		rom_a7h {
+			rom-addr = /bits/ 8 <0xa7>;
+			rom-val = /bits/ 8 <0xf7>;
+		};
+		rom_a9h {
+			rom-addr = /bits/ 8 <0xa9>;
+			rom-val = /bits/ 8 <0x80>;
+		};
+		rom_aah {
+			rom-addr = /bits/ 8 <0xaa>;
+			rom-val = /bits/ 8 <0x0f>;
+		};
+		rom_aeh {
+			rom-addr = /bits/ 8 <0xae>;
+			rom-val = /bits/ 8 <0x0f>;
+		};
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
+
+		host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pm8941_coincell {
+	status = "okay";
+
+	qcom,rset-ohms = <2100>;
+	qcom,vset-millivolts = <3000>;
+};
+
+&pm8941_gpios {
+	gpio_keys_pin_a: gpio-keys-active-state {
+		pins = "gpio2", "gpio5";
+		function = "normal";
+
+		bias-pull-up;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	bt_reg_on_pin: bt-reg-on-state {
+		pins = "gpio16";
+		function = "normal";
+
+		output-low;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	wlan_sleep_clk_pin: wl-sleep-clk-state {
+		pins = "gpio17";
+		function = "func2";
+
+		output-high;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	wlan_regulator_pin: wl-reg-active-state {
+		pins = "gpio18";
+		function = "normal";
+
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+	};
+
+	lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
+		pins = "gpio20";
+		function = "normal";
+
+		bias-disable;
+		power-source = <PM8941_GPIO_S3>;
+		input-disable;
+		output-low;
+	};
+
+};
+
+&pm8941_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@6 {
+			reg = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@7 {
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&remoteproc_adsp {
+	cx-supply = <&pm8841_s2>;
+};
+
+&remoteproc_mss {
+	cx-supply = <&pm8841_s2>;
+	mss-supply = <&pm8841_s3>;
+	mx-supply = <&pm8841_s1>;
+	pll-supply = <&pm8941_l12>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8841-regulators";
+
+		pm8841_s1: s1 {
+			regulator-min-microvolt = <675000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s2: s2 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8841_s4: s4 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm8941-regulators";
+
+		vdd_l1_l3-supply = <&pm8941_s1>;
+		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+		vdd_l4_l11-supply = <&pm8941_s1>;
+		vdd_l5_l7-supply = <&pm8941_s2>;
+		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+		vdd_l21-supply = <&vreg_boost>;
+
+		pm8941_s1: s1 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s2: s2 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-boot-on;
+		};
+
+		pm8941_s3: s3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <154000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_s4: s4 {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+
+		pm8941_l1: l1 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8941_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8941_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8941_l11: l11 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8941_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8941_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8941_l15: l15 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8941_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8941_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8941_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <500000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8941_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-boot-on;
+		};
+
+		pm8941_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8941_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8941_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-boot-on;
+		};
+
+		pm8941_lvs3: lvs3 {};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l20>;
+	vqmmc-supply = <&pm8941_s3>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm8941_l21>;
+	vqmmc-supply = <&pm8941_l13>;
+
+	cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+};
+
+&sdhc_3 {
+	status = "okay";
+
+	max-frequency = <100000000>;
+	vmmc-supply = <&vreg_wlan>;
+	non-removable;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc3_on>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bcrmf@1 {
+		compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		brcm,drive-strength = <10>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_sleep_clk_pin>;
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <1500000>;
+	qcom,fast-charge-current-limit = <1500000>;
+	qcom,dc-current-limit = <1800000>;
+	usb-charge-current-limit = <1800000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,fast-charge-low-threshold-voltage = <3400000>;
+	qcom,auto-recharge-threshold-voltage = <4200000>;
+	qcom,minimum-input-voltage = <4300000>;
+};
+
+&tlmm {
+	lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <10>;
+		output-low;
+		bias-disable;
+	};
+
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc1_cmd", "sdc1_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <6>;
+			bias-disable;
+		};
+
+		cmd-data-pins {
+			pins = "sdc2_cmd", "sdc2_data";
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+
+		cd-pins {
+			pins = "gpio62";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	sdc3_on: sdc3-on-state {
+		clk-pins {
+			pins = "gpio40";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio39";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio35", "gpio36", "gpio37", "gpio38";
+			function = "sdc3";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	ts_int_pin: ts-int-pin-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	bt_host_wake_pin: bt-host-wake-state {
+		pins = "gpio95";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	bt_dev_wake_pin: bt-dev-wake-state {
+		pins = "gpio96";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb {
+	status = "okay";
+
+	phys = <&usb_hs1_phy>;
+	phy-select = <&tcsr 0xb000 0>;
+	extcon = <&smbb>, <&usb_id>;
+	vbus-supply = <&chg_otg>;
+
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+};
+
+&usb_hs1_phy {
+	status = "okay";
+
+	v1p8-supply = <&pm8941_l6>;
+	v3p3-supply = <&pm8941_l24>;
+
+	extcon = <&smbb>;
+	qcom,init-seq = /bits/ 8 <0x1 0x64>;
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi
index b64c28036dd0..58df6e75ab6d 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974pro.dtsi
@@ -1,23 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974.dtsi"
 
-/ {
-	soc {
-		sdhci@f9824900 {
-			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&gcc GCC_SDCC1_AHB_CLK>,
-				 <&xo_board>,
-				 <&gcc GCC_SDCC1_CDCCAL_FF_CLK>,
-				 <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>;
-			clock-names = "core", "iface", "xo", "cal", "sleep";
-		};
+&gcc {
+	compatible = "qcom,gcc-msm8974pro";
+};
 
-		clock-controller@fc400000 {
-				compatible = "qcom,gcc-msm8974pro";
-		};
+&gpu {
+	compatible = "qcom,adreno-330.2", "qcom,adreno";
+};
 
-		adreno@fdb00000 {
-			compatible = "qcom,adreno-330.2",
-				     "qcom,adreno";
-		};
-	};
+&sdhc_1 {
+	clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+		 <&gcc GCC_SDCC1_APPS_CLK>,
+		 <&xo_board>,
+		 <&gcc GCC_SDCC1_CDCCAL_FF_CLK>,
+		 <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>;
+	clock-names = "iface", "core", "xo", "cal", "sleep";
 };
diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi
new file mode 100644
index 000000000000..46ba84f86c9f
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-pm8226.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: BSD-3-Clause
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pm8226_0: pm8226@0 {
+		compatible = "qcom,pm8226", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm8226_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		smbb: charger@1000 {
+			compatible = "qcom,pm8226-charger";
+			reg = <0x1000>;
+			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "chg-done",
+					  "chg-fast",
+					  "chg-trkl",
+					  "bat-temp-ok",
+					  "bat-present",
+					  "chg-gone",
+					  "usb-valid",
+					  "dc-valid";
+
+			chg_otg: otg-vbus { };
+		};
+
+		pm8226_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			adc-chan@7 {
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+			adc-chan@8 {
+				reg = <VADC_DIE_TEMP>;
+				label = "die_temp";
+			};
+			adc-chan@9 {
+				reg = <VADC_REF_625MV>;
+				label = "ref_625mv";
+			};
+			adc-chan@a {
+				reg = <VADC_REF_1250MV>;
+				label = "ref_1250mv";
+			};
+			adc-chan@e {
+				reg = <VADC_GND_REF>;
+			};
+			adc-chan@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+
+		pm8226_iadc: adc@3600 {
+			compatible = "qcom,pm8226-iadc", "qcom,spmi-iadc";
+			reg = <0x3600>;
+			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm8226_mpps: mpps@a000 {
+			compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8226_mpps 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8226_gpios: gpio@c000 {
+			compatible = "qcom,pm8226-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8226_gpios 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8226_1: pm8226@1 {
+		compatible = "qcom,pm8226", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8226_spmi_regulators: regulators {
+			compatible = "qcom,pm8226-regulators";
+		};
+
+		pm8226_vib: vibrator@c000 {
+			compatible = "qcom,pm8916-vib";
+			reg = <0xc000>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi
index 2fd59c440903..b5cdde034d18 100644
--- a/arch/arm/boot/dts/qcom-pm8841.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8841.dtsi
@@ -15,16 +15,16 @@
 			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <4 0xa0 0 IRQ_TYPE_NONE>,
-				     <4 0xa1 0 IRQ_TYPE_NONE>,
-				     <4 0xa2 0 IRQ_TYPE_NONE>,
-				     <4 0xa3 0 IRQ_TYPE_NONE>;
+			gpio-ranges = <&pm8841_mpps 0 0 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
 			interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index c1f2012d1c8b..a821f0368a28 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -27,7 +27,7 @@
 			bias-pull-up;
 		};
 
-		usb_id: misc@900 {
+		usb_id: usb-detect@900 {
 			compatible = "qcom,pm8941-misc";
 			reg = <0x900>;
 			interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
@@ -59,7 +59,7 @@
 			chg_otg: otg-vbus { };
 		};
 
-		pm8941_gpios: gpios@c000 {
+		pm8941_gpios: gpio@c000 {
 			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
@@ -68,7 +68,7 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			boost_bypass_n_pin: boost-bypass {
+			boost_bypass_n_pin: boost-bypass-state {
 				pins = "gpio21";
 				function = "normal";
 			};
@@ -79,14 +79,9 @@
 			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
-				     <0 0xa1 0 IRQ_TYPE_NONE>,
-				     <0 0xa2 0 IRQ_TYPE_NONE>,
-				     <0 0xa3 0 IRQ_TYPE_NONE>,
-				     <0 0xa4 0 IRQ_TYPE_NONE>,
-				     <0 0xa5 0 IRQ_TYPE_NONE>,
-				     <0 0xa6 0 IRQ_TYPE_NONE>,
-				     <0 0xa7 0 IRQ_TYPE_NONE>;
+			gpio-ranges = <&pm8941_mpps 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		pm8941_temp: temp-alarm@2400 {
@@ -98,7 +93,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		pm8941_vadc: vadc@3100 {
+		pm8941_vadc: adc@3100 {
 			compatible = "qcom,spmi-vadc";
 			reg = <0x3100>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
@@ -106,37 +101,44 @@
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
 
-			bat_temp {
-				reg = <VADC_LR_MUX1_BAT_THERM>;
+
+			adc-chan@6 {
+				reg = <VADC_VBAT_SNS>;
 			};
-			die_temp {
+
+			adc-chan@8 {
 				reg = <VADC_DIE_TEMP>;
 			};
-			ref_625mv {
+
+			adc-chan@9 {
 				reg = <VADC_REF_625MV>;
 			};
-			ref_1250v {
+
+			adc-chan@a {
 				reg = <VADC_REF_1250MV>;
 			};
-			ref_gnd {
+
+			adc-chan@e {
 				reg = <VADC_GND_REF>;
 			};
-			ref_vdd {
+
+			adc-chan@f {
 				reg = <VADC_VDD_VADC>;
 			};
-			vbat_sns {
-				reg = <VADC_VBAT_SNS>;
+
+			adc-chan@30 {
+				reg = <VADC_LR_MUX1_BAT_THERM>;
 			};
 		};
 
-		pm8941_iadc: iadc@3600 {
+		pm8941_iadc: adc@3600 {
 			compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
 			reg = <0x3600>;
 			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
 			qcom,external-resistor-micro-ohms = <10000>;
 		};
 
-		coincell@2800 {
+		pm8941_coincell: charger@2800 {
 			compatible = "qcom,pm8941-coincell";
 			reg = <0x2800>;
 			status = "disabled";
@@ -149,6 +151,22 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8941_lpg: pwm {
+			compatible = "qcom,pm8941-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+		pm8941_vib: vibrator@c000 {
+			compatible = "qcom,pm8916-vib";
+			reg = <0xc000>;
+			status = "disabled";
+		};
+
 		pm8941_wled: wled@d800 {
 			compatible = "qcom,pm8941-wled";
 			reg = <0xd800>;
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index e921c5e93a5d..2dd4c6aa71c9 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -27,7 +27,7 @@
 			bias-pull-up;
 		};
 
-		pma8084_gpios: gpios@c000 {
+		pma8084_gpios: gpio@c000 {
 			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
@@ -42,14 +42,9 @@
 			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
-				     <0 0xa1 0 IRQ_TYPE_NONE>,
-				     <0 0xa2 0 IRQ_TYPE_NONE>,
-				     <0 0xa3 0 IRQ_TYPE_NONE>,
-				     <0 0xa4 0 IRQ_TYPE_NONE>,
-				     <0 0xa5 0 IRQ_TYPE_NONE>,
-				     <0 0xa6 0 IRQ_TYPE_NONE>,
-				     <0 0xa7 0 IRQ_TYPE_NONE>;
+			gpio-ranges = <&pma8084_mpps 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		pma8084_temp: temp-alarm@2400 {
@@ -61,7 +56,7 @@
 			io-channel-names = "thermal";
 		};
 
-		pma8084_vadc: vadc@3100 {
+		pma8084_vadc: adc@3100 {
 			compatible = "qcom,spmi-vadc";
 			reg = <0x3100>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
@@ -69,22 +64,27 @@
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
 
-			die_temp {
+			adc-chan@8 {
 				reg = <VADC_DIE_TEMP>;
 			};
-			ref_625mv {
+
+			adc-chan@9 {
 				reg = <VADC_REF_625MV>;
 			};
-			ref_1250v {
+
+			adc-chan@a {
 				reg = <VADC_REF_1250MV>;
 			};
-			ref_buf_625mv {
+
+			adc-chan@c {
 				reg = <VADC_SPARE1>;
 			};
-			ref_gnd {
+
+			adc-chan@e {
 				reg = <VADC_GND_REF>;
 			};
-			ref_vdd {
+
+			adc-chan@f {
 				reg = <VADC_VDD_VADC>;
 			};
 		};
diff --git a/arch/arm/boot/dts/qcom-pmx55.dtsi b/arch/arm/boot/dts/qcom-pmx55.dtsi
index 6571b88d018a..e1b869480bbd 100644
--- a/arch/arm/boot/dts/qcom-pmx55.dtsi
+++ b/arch/arm/boot/dts/qcom-pmx55.dtsi
@@ -16,7 +16,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		power-on@800 {
+		pon@800 {
 			compatible = "qcom,pm8916-pon";
 			reg = <0x0800>;
 
@@ -69,6 +69,7 @@
 			compatible = "qcom,pmx55-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
+			gpio-ranges = <&pmx55_gpios 0 0 11>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom-pmx65.dtsi
new file mode 100644
index 000000000000..1c7fdf59c1f5
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-pmx65.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@1 {
+		compatible = "qcom,pmx65", "qcom,spmi-pmic";
+		reg = <1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmx65_temp: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmx65_gpios: gpio@8800 {
+			compatible = "qcom,pmx65-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmx65_gpios 0 0 16>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
index 9649c1e11311..7e97ad5803d8 100644
--- a/arch/arm/boot/dts/qcom-sdx55-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
@@ -75,7 +75,7 @@
 };
 
 &apps_rsc {
-	pmx55-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pmx55-rpmh-regulators";
 		qcom,pmic-id = "e";
 
@@ -229,6 +229,10 @@
 	};
 };
 
+&remoteproc_mpss {
+	memory-region = <&mpss_adsp_mem>;
+};
+
 &usb {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts
new file mode 100644
index 000000000000..51058b065279
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qcom-sdx55.dtsi"
+#include "qcom-pmx55.dtsi"
+
+/ {
+	model = "Thundercomm T55 Development Kit";
+	compatible = "qcom,sdx55-t55", "qcom,sdx55";
+	qcom,board-id = <0xb010008 0x4>;
+
+	aliases {
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mpss_debug_mem: memory@8ef00000 {
+			no-map;
+			reg = <0x8ef00000 0x800000>;
+		};
+
+		ipa_fw_mem: memory@8fced000 {
+			no-map;
+			reg = <0x8fced000 0x10000>;
+		};
+
+		mpss_adsp_mem: memory@90800000 {
+			no-map;
+			reg = <0x90800000 0xf800000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_bob_3p3: pmx55-bob {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bob_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	vreg_s7e_mx_0p752: pmx55-s7e {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s7e_mx_0p752";
+		regulator-min-microvolt = <752000>;
+		regulator-max-microvolt = <752000>;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	vreg_sd_vdd: sd-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_sd_vdd";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		vin-supply = <&vreg_vddpx_2>;
+	};
+
+	vreg_vddpx_2: vddpx-2 {
+		compatible = "regulator-gpio";
+		regulator-name = "vreg_vddpx_2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2850000>;
+		enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+		gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0>, <2850000 1>;
+		startup-delay-us = <200000>;
+		enable-active-high;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmx55-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-l1-l2-supply = <&vreg_s2e_1p224>;
+		vdd-l3-l9-supply = <&vreg_s3e_0p824>;
+		vdd-l4-l12-supply = <&vreg_s4e_1p904>;
+		vdd-l5-l6-supply = <&vreg_s4e_1p904>;
+		vdd-l7-l8-supply = <&vreg_s3e_0p824>;
+		vdd-l10-l11-l13-supply = <&vreg_bob_3p3>;
+		vdd-l14-supply = <&vreg_s7e_mx_0p752>;
+		vdd-l15-supply = <&vreg_s2e_1p224>;
+		vdd-l16-supply = <&vreg_s4e_1p904>;
+
+		vreg_s2e_1p224: smps2 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		vreg_s3e_0p824: smps3 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s4e_1p904: smps4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1960000>;
+		};
+
+		vreg_l1e_bb_1p2: ldo1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo2 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo3 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l4e_bb_0p875: ldo4 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <872000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5e_bb_1p7: ldo5 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo7 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo8 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo9 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10e_3p1: ldo10 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo13 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo14 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo15 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	status = "okay";
+};
+
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
+	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+
+	status = "okay";
+};
+
+&pcie_rc {
+	perst-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+		/* efs2 partition is secured */
+		secure-regions = /bits/ 64 <0x500000 0xb00000>;
+	};
+};
+
+&remoteproc_mpss {
+	memory-region = <&mpss_adsp_mem>;
+	status = "okay";
+};
+
+&tlmm {
+	pcie_default: pcie-default-state {
+		clkreq-pins {
+			pins = "gpio56";
+			function = "pcie_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio57";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-pins {
+		       pins = "gpio53";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
+};
+
+&usb_hsphy {
+	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+	vdda33-supply = <&vreg_l10e_3p1>;
+	vdda18-supply = <&vreg_l5e_bb_1p7>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4e_bb_0p875>;
+	vdda-pll-supply = <&vreg_l1e_bb_1p2>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
new file mode 100644
index 000000000000..8fadc6e70692
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qcom-sdx55.dtsi"
+#include "qcom-pmx55.dtsi"
+
+/ {
+	model = "Telit FN980 TLB";
+	compatible = "qcom,sdx55-telit-fn980-tlb", "qcom,sdx55";
+	qcom,board-id = <0xb010008 0x0>;
+
+	aliases {
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mpss_debug_mem: memory@8ef00000 {
+			no-map;
+			reg = <0x8ef00000 0x800000>;
+		};
+
+		ipa_fw_mem: memory@8fced000 {
+			no-map;
+			reg = <0x8fced000 0x10000>;
+		};
+
+		mpss_adsp_mem: memory@90800000 {
+			no-map;
+			reg = <0x90800000 0xf800000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_bob_3p3: pmx55-bob {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bob_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	vreg_s7e_mx_0p752: pmx55-s7e {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s7e_mx_0p752";
+		regulator-min-microvolt = <752000>;
+		regulator-max-microvolt = <752000>;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	vreg_sd_vdd: sd-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_sd_vdd";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		vin-supply = <&vreg_vddpx_2>;
+	};
+
+	vreg_vddpx_2: vddpx-2 {
+		compatible = "regulator-gpio";
+		regulator-name = "vreg_vddpx_2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2850000>;
+		enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+		gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0>, <2850000 1>;
+		startup-delay-us = <200000>;
+		enable-active-high;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmx55-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-l1-l2-supply = <&vreg_s2e_1p224>;
+		vdd-l3-l9-supply = <&vreg_s3e_0p824>;
+		vdd-l4-l12-supply = <&vreg_s4e_1p904>;
+		vdd-l5-l6-supply = <&vreg_s4e_1p904>;
+		vdd-l7-l8-supply = <&vreg_s3e_0p824>;
+		vdd-l10-l11-l13-supply = <&vreg_bob_3p3>;
+		vdd-l14-supply = <&vreg_s7e_mx_0p752>;
+		vdd-l15-supply = <&vreg_s2e_1p224>;
+		vdd-l16-supply = <&vreg_s4e_1p904>;
+
+		vreg_s2e_1p224: smps2 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		vreg_s3e_0p824: smps3 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s4e_1p904: smps4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1960000>;
+		};
+
+		vreg_l1e_bb_1p2: ldo1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo2 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo3 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l4e_bb_0p875: ldo4 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <872000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5e_bb_1p7: ldo5 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo7 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo8 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo9 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10e_3p1: ldo10 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo13 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo14 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo15 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		ldo16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	status = "okay";
+};
+
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
+	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+
+	status = "okay";
+};
+
+&pcie_ep {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default
+		     &pcie_ep_wake_default>;
+
+	reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+		/* ico and efs2 partitions are secured */
+		secure-regions = /bits/ 64 <0x500000 0x500000
+					    0xa00000 0xb00000>;
+	};
+};
+
+&remoteproc_mpss {
+	memory-region = <&mpss_adsp_mem>;
+	status = "okay";
+};
+
+&tlmm {
+	pcie_ep_clkreq_default: pcie-ep-clkreq-default-state {
+		pins = "gpio56";
+		function = "pcie_clkreq";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie_ep_perst_default: pcie-ep-perst-default-state {
+		pins = "gpio57";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	pcie_ep_wake_default: pcie-ep-wake-default-state {
+		pins = "gpio53";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb_hsphy {
+	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+	vdda33-supply = <&vreg_l10e_3p1>;
+	vdda18-supply = <&vreg_l5e_bb_1p7>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4e_bb_0p875>;
+	vdda-pll-supply = <&vreg_l1e_bb_1p2>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index e4180bbc4655..342c3d14001e 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -8,6 +8,8 @@
 
 #include <dt-bindings/clock/qcom,gcc-sdx55.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,sdx55.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -53,6 +55,41 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x0>;
 			enable-method = "psci";
+			clocks = <&apcs>;
+			power-domains = <&rpmhpd SDX55_CX>;
+			power-domain-names = "rpmhpd";
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sdx55", "qcom,scm";
+		};
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-345600000 {
+			opp-hz = /bits/ 64 <345600000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			required-opps = <&rpmhpd_opp_turbo>;
 		};
 	};
 
@@ -107,7 +144,7 @@
 			reg = <0x8ff00000 0x100000>;
 		};
 
-		tz_apps_mem: memory@0x90000000 {
+		tz_apps_mem: memory@90000000 {
 			no-map;
 			reg = <0x90000000 0x500000>;
 		};
@@ -119,6 +156,37 @@
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -138,7 +206,7 @@
 		blsp1_uart3: serial@831000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x00831000 0x200>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc 30>,
 				 <&gcc 9>;
 			clock-names = "core", "iface";
@@ -146,7 +214,8 @@
 		};
 
 		usb_hsphy: phy@ff4000 {
-			compatible = "qcom,usb-snps-hs-7nm-phy";
+			compatible = "qcom,sdx55-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
 			reg = <0x00ff4000 0x114>;
 			status = "disabled";
 			#phy-cells = <0>;
@@ -161,7 +230,6 @@
 			compatible = "qcom,sdx55-qmp-usb3-uni-phy";
 			reg = <0x00ff6000 0x1c0>;
 			status = "disabled";
-			#clock-cells = <1>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -187,6 +255,27 @@
 			};
 		};
 
+		mc_virt: interconnect@1100000 {
+			compatible = "qcom,sdx55-mc-virt";
+			reg = <0x01100000 0x400000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mem_noc: interconnect@9680000 {
+			compatible = "qcom,sdx55-mem-noc";
+			reg = <0x09680000 0x40000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@162c000 {
+			compatible = "qcom,sdx55-system-noc";
+			reg = <0x0162c000 0x31200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		qpic_bam: dma-controller@1b04000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x01b04000 0x1c000>;
@@ -199,7 +288,7 @@
 			status = "disabled";
 		};
 
-		qpic_nand: nand@1b30000 {
+		qpic_nand: nand-controller@1b30000 {
 			compatible = "qcom,sdx55-nand";
 			reg = <0x01b30000 0x10000>;
 			#address-cells = <1>;
@@ -215,13 +304,223 @@
 			status = "disabled";
 		};
 
+		pcie_rc: pcie@1c00000 {
+			compatible = "qcom,pcie-sdx55";
+			reg = <0x01c00000 0x3000>,
+			      <0x40000000 0xf1d>,
+			      <0x40000f20 0xc8>,
+			      <0x40001000 0x1000>,
+			      <0x40100000 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x40300000 0x0 0x3fd00000>;
+
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "msi8";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
+				 <&gcc GCC_PCIE_AUX_CLK>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLEEP_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "sleep";
+
+			assigned-clocks = <&gcc GCC_PCIE_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommu-map = <0x0   &apps_smmu 0x0200 0x1>,
+				    <0x100 &apps_smmu 0x0201 0x1>,
+				    <0x200 &apps_smmu 0x0202 0x1>,
+				    <0x300 &apps_smmu 0x0203 0x1>,
+				    <0x400 &apps_smmu 0x0204 0x1>;
+
+			resets = <&gcc GCC_PCIE_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_GDSC>;
+
+			phys = <&pcie_lane>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie_ep: pcie-ep@1c00000 {
+			compatible = "qcom,sdx55-pcie-ep";
+			reg = <0x01c00000 0x3000>,
+			      <0x40000000 0xf1d>,
+			      <0x40000f20 0xc8>,
+			      <0x40001000 0x1000>,
+			      <0x40200000 0x100000>,
+			      <0x01c03000 0x3000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "addr_space",
+				    "mmio";
+
+			qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+			clocks = <&gcc GCC_PCIE_AUX_CLK>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_SLEEP_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "sleep",
+				      "ref";
+
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global",
+					  "doorbell";
+			resets = <&gcc GCC_PCIE_BCR>;
+			reset-names = "core";
+			power-domains = <&gcc PCIE_GDSC>;
+			phys = <&pcie_lane>;
+			phy-names = "pciephy";
+			max-link-speed = <3>;
+			num-lanes = <2>;
+
+			status = "disabled";
+		};
+
+		pcie_phy: phy@1c07000 {
+			compatible = "qcom,sdx55-qmp-pcie-phy";
+			reg = <0x01c07000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
+				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
+				 <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen";
+
+			resets = <&gcc GCC_PCIE_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie_lane: lanes@1c06000 {
+				reg = <0x01c06000 0x104>, /* tx0 */
+				      <0x01c06200 0x328>, /* rx0 */
+				      <0x01c07200 0x1e8>, /* pcs */
+				      <0x01c06800 0x104>, /* tx1 */
+				      <0x01c06a00 0x328>, /* rx1 */
+				      <0x01c07600 0x800>; /* pcs_misc */
+				clocks = <&gcc GCC_PCIE_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+				clock-output-names = "pcie_pipe_clk";
+			};
+		};
+
+		ipa: ipa@1e40000 {
+			compatible = "qcom,sdx55-ipa";
+
+			iommus = <&apps_smmu 0x5e0 0x0>,
+				 <&apps_smmu 0x5e2 0x0>;
+			reg = <0x1e40000 0x7000>,
+			      <0x1e50000 0x4b20>,
+			      <0x1e04000 0x2c000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI_CH0>,
+					<&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>,
+					<&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>;
+			interconnect-names = "memory",
+					     "imem",
+					     "config";
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x01f40000 0x40000>;
 			#hwlock-cells = <1>;
 		};
 
-		sdhc_1: sdhci@8804000 {
+		tcsr: syscon@1fcb000 {
+			compatible = "qcom,sdx55-tcsr", "syscon";
+			reg = <0x01fc0000 0x1000>;
+		};
+
+		sdhc_1: mmc@8804000 {
 			compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0x08804000 0x1000>;
 			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
@@ -233,6 +532,39 @@
 			status = "disabled";
 		};
 
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sdx55-mpss-pas";
+			reg = <0x04080000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SDX55_CX>,
+					<&rpmhpd SDX55_MSS>;
+			power-domain-names = "cx", "mss";
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs 15>;
+			};
+		};
+
 		usb: usb@a6f8800 {
 			compatible = "qcom,sdx55-dwc3", "qcom,dwc3";
 			reg = <0x0a6f8800 0x400>;
@@ -244,10 +576,13 @@
 			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
 				 <&gcc GCC_USB30_MASTER_CLK>,
 				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
-				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-				 <&gcc GCC_USB30_SLEEP_CLK>;
-			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
-				      "sleep";
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
 
 			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB30_MASTER_CLK>;
@@ -290,7 +625,7 @@
 			reg = <0x0c264000 0x1000>;
 		};
 
-		spmi_bus: qcom,spmi@c440000 {
+		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0c440000 0x0000d00>,
 			      <0x0c600000 0x2000000>,
@@ -317,10 +652,26 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 108>;
+		};
+
+		sram@1468f000 {
+			compatible = "qcom,sdx55-imem", "syscon", "simple-mfd";
+			reg = <0x1468f000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0x0 0x1468f000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0x200>;
+			};
 		};
 
 		apps_smmu: iommu@15000000 {
-			compatible = "qcom,sdx55-smmu-500", "arm,mmu-500";
+			compatible = "qcom,sdx55-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x15000000 0x20000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
@@ -352,6 +703,23 @@
 			      <0x17802000 0x1000>;
 		};
 
+		a7pll: clock@17808000 {
+			compatible = "qcom,sdx55-a7pll";
+			reg = <0x17808000 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <0>;
+		};
+
+		apcs: mailbox@17810000 {
+			compatible = "qcom,sdx55-apcs-gcc", "syscon";
+			reg = <0x17810000 0x2000>;
+			#mbox-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
+			clock-names = "ref", "pll", "aux";
+			#clock-cells = <0>;
+		};
+
 		watchdog@17817000 {
 			compatible = "qcom,apss-wdt-sdx55", "qcom,kpss-wdt";
 			reg = <0x17817000 0x1000>;
@@ -491,6 +859,10 @@
 					};
 				};
 			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
new file mode 100644
index 000000000000..57bc3b03d3aa
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "qcom-sdx65.dtsi"
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <arm64/qcom/pmk8350.dtsi>
+#include <arm64/qcom/pm8150b.dtsi>
+#include "qcom-pmx65.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SDX65 MTP";
+	compatible = "qcom,sdx65-mtp", "qcom,sdx65";
+	qcom,board-id = <0x2010008 0x302>;
+
+	aliases {
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mpss_dsm: memory@8c400000 {
+			no-map;
+			reg = <0x8c400000 0x3200000>;
+		};
+
+		ipa_fw_mem: memory@8fced000 {
+			no-map;
+			reg = <0x8fced000 0x10000>;
+		};
+
+		mpss_adsp_mem: memory@90800000 {
+			no-map;
+			reg = <0x90800000 0x10000000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_bob_3p3: pmx65_bob {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bob_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmx65-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-supply = <&vreg_s2b_1p224>;
+		vdd-l2-l18-supply = <&vreg_s2b_1p224>;
+		vdd-l3-supply = <&vreg_s8b_0p824>;
+		vdd-l4-supply = <&vreg_s7b_0p936>;
+		vdd-l5-l6-l16-supply = <&vreg_s4b_1p824>;
+		vdd-l7-supply = <&vreg_s3b_0p776>;
+		vdd-l8-l9-supply = <&vreg_s8b_0p824>;
+		vdd-l10-supply = <&vreg_bob_3p3>;
+		vdd-l11-l13-supply = <&vreg_bob_3p3>;
+		vdd-l12-supply = <&vreg_s2b_1p224>;
+		vdd-l14-supply = <&vreg_s3b_0p776>;
+		vdd-l15-supply = <&vreg_s2b_1p224>;
+		vdd-l17-supply = <&vreg_s8b_0p824>;
+		vdd-l19-supply = <&vreg_s3b_0p776>;
+		vdd-l20-supply = <&vreg_s7b_0p936>;
+		vdd-l21-supply = <&vreg_s7b_0p936>;
+
+		vreg_s2b_1p224: smps2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		vreg_s3b_0p776: smps3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		vreg_s4b_1p824: smps4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2024000>;
+		};
+
+		vreg_s7b_0p936: smps7 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		vreg_s8b_0p824: smps8 {
+			regulator-min-microvolt = <304000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		vreg_l1b_1p2: ldo1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo2 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo3 {
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p88: ldo4 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_1p8: ldo5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo7 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo8 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo9 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_3p08: ldo10 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo12 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo13 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo14 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo15 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo16 {
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1776000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo17 {
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo19 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo20 {
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ldo21 {
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "skip";
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+		/* ico and efs2 partitions are secured */
+		secure-regions = /bits/ 64 <0x500000 0x500000
+					    0xa00000 0xb00000>;
+	};
+};
+
+&remoteproc_mpss {
+	memory-region = <&mpss_adsp_mem>;
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	vdda-pll-supply = <&vreg_l4b_0p88>;
+	vdda33-supply = <&vreg_l10b_3p08>;
+	vdda18-supply = <&vreg_l5b_1p8>;
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4b_0p88>;
+	vdda-pll-supply = <&vreg_l1b_1p2>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
new file mode 100644
index 000000000000..525dd8a1f664
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -0,0 +1,724 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SDX65 SoC device tree source
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdx65.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/interconnect/qcom,sdx65.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>;
+	interrupt-parent = <&intc>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			clock-output-names = "xo_board";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+			#clock-cells = <0>;
+		};
+
+		nand_clk_dummy: nand-clk-dummy {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			power-domains = <&rpmhpd SDX65_CX_AO>;
+			power-domain-names = "rpmhpd";
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sdx65", "qcom,scm";
+		};
+	};
+
+	mc_virt: interconnect-mc-virt {
+		compatible = "qcom,sdx65-mc-virt";
+		#interconnect-cells = <1>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-345600000 {
+			opp-hz = /bits/ 64 <345600000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			required-opps = <&rpmhpd_opp_turbo>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		tz_heap_mem: memory@8fcad000 {
+			no-map;
+			reg = <0x8fcad000 0x40000>;
+		};
+
+		secdata_mem: memory@8fcfd000 {
+			no-map;
+			reg = <0x8fcfd000 0x1000>;
+		};
+
+		hyp_mem: memory@8fd00000 {
+			no-map;
+			reg = <0x8fd00000 0x80000>;
+		};
+
+		access_control_mem: memory@8fd80000 {
+			no-map;
+			reg = <0x8fd80000 0x80000>;
+		};
+
+		aop_mem: memory@8fe00000 {
+			no-map;
+			reg = <0x8fe00000 0x20000>;
+		};
+
+		smem_mem: memory@8fe20000 {
+			compatible = "qcom,smem";
+			reg = <0x8fe20000 0xc0000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		cmd_db: reserved-memory@8fee0000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x8fee0000 0x20000>;
+			no-map;
+		};
+
+		tz_mem: memory@8ff00000 {
+			no-map;
+			reg = <0x8ff00000 0x100000>;
+		};
+
+		tz_apps_mem: memory@90000000 {
+			no-map;
+			reg = <0x90000000 0x500000>;
+		};
+
+		llcc_tcm_mem: memory@15800000 {
+			no-map;
+			reg = <0x15800000 0x800000>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdx65";
+			reg = <0x00100000 0x001f7400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			#power-domain-cells = <1>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		blsp1_uart3: serial@831000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x00831000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		usb_hsphy: phy@ff4000 {
+			compatible = "qcom,sdx65-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0xff4000 0x120>;
+			#phy-cells = <0>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_BCR>;
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@ff6000 {
+			compatible = "qcom,sdx65-qmp-usb3-uni-phy";
+			reg = <0x00ff6000 0x1c8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_EN>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB3PHY_PHY_BCR>,
+				 <&gcc GCC_USB3_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			status = "disabled";
+
+			usb_ssphy: phy@ff6200 {
+				reg = <0x00ff6e00 0x160>,
+				      <0x00ff7000 0x1ec>,
+				      <0x00ff6200 0x1e00>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			};
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sdx65-system-noc";
+			reg = <0x01620000 0x31200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		qpic_bam: dma-controller@1b04000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x01b04000 0x1c000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			status = "disabled";
+		};
+
+		qpic_nand: nand-controller@1b30000 {
+			compatible = "qcom,sdx55-nand";
+			reg = <0x01b30000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>,
+				 <&nand_clk_dummy>;
+			clock-names = "core", "aon";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01f40000 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		ipa: ipa@3f40000 {
+			compatible = "qcom,sdx65-ipa";
+
+			reg = <0x03f40000 0x10000>,
+			      <0x03f50000 0x5000>,
+			      <0x03e04000 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			iommus = <&apps_smmu 0x5e0 0x0>,
+				 <&apps_smmu 0x5e2 0x0>;
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
+					<&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_IPA_CFG>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sdx55-mpss-pas";
+			reg = <0x04080000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SDX65_CX>,
+					<&rpmhpd SDX65_MSS>;
+			power-domain-names = "cx", "mss";
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs 15>;
+			};
+		};
+
+		sdhc_1: mmc@8804000 {
+			compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x08804000 0x1000>;
+			reg-names = "hc";
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&gcc GCC_SDCC1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		mem_noc: interconnect@9680000 {
+			compatible = "qcom,sdx65-mem-noc";
+			reg = <0x09680000 0x27200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb: usb@a6f8800 {
+			compatible = "qcom,sdx65-dwc3", "qcom,dwc3";
+			reg = <0x0a6f8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB30_SLV_AHB_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_USB30_MSTR_AXI_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+					"sleep";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 76 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 18 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 19 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_GDSC>;
+
+			resets = <&gcc GCC_USB30_BCR>;
+
+			status = "disabled";
+
+			usb_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0a600000 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x1a0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		restart@c264000 {
+			compatible = "qcom,pshold";
+			reg = <0x0c264000 0x1000>;
+		};
+
+		spmi_bus: qcom,spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0xc440000 0xd00>,
+				<0xc600000 0x2000000>,
+				<0xe600000 0x100000>,
+				<0xe700000 0xa0000>,
+				<0xc40a000 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sdx65-tlmm";
+			reg = <0xf100000 0x300000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 109>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <2>;
+		};
+
+		pdc: interrupt-controller@b210000 {
+			compatible = "qcom,sdx65-pdc", "qcom,pdc";
+			reg = <0xb210000 0x10000>;
+			qcom,pdc-ranges = <0 147 52>, <52 266 32>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		sram@1468f000 {
+			compatible = "qcom,sdx65-imem", "syscon", "simple-mfd";
+			reg = <0x1468f000 0x1000>;
+			ranges = <0x0 0x1468f000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sdx65-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x15000000 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts =	<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17800000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#interrupt-cells = <3>;
+			reg = <0x17800000 0x1000>,
+			      <0x17802000 0x1000>;
+		};
+
+		a7pll: clock@17808000 {
+			compatible = "qcom,sdx55-a7pll";
+			reg = <0x17808000 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <0>;
+		};
+
+		apcs: mailbox@17810000 {
+			compatible = "qcom,sdx55-apcs-gcc", "syscon";
+			reg = <0x17810000 0x2000>;
+			#mbox-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
+			clock-names = "ref", "pll", "aux";
+			#clock-cells = <0>;
+		};
+
+		watchdog@17817000 {
+			compatible = "qcom,apss-wdt-sdx65", "qcom,kpss-wdt";
+			reg = <0x17817000 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@17820000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x17820000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17821000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 7 0x4>,
+					     <GIC_SPI 6 0x4>;
+				reg = <0x17821000 0x1000>,
+				      <0x17822000 0x1000>;
+			};
+
+			frame@17823000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 8 0x4>;
+				reg = <0x17823000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17824000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 9 0x4>;
+				reg = <0x17824000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17825000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 10 0x4>;
+				reg = <0x17825000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17826000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 11 0x4>;
+				reg = <0x17826000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17827000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 12 0x4>;
+				reg = <0x17827000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17828000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 13 0x4>;
+				reg = <0x17828000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17829000 {
+				frame-number = <7>;
+				interrupts = <GIC_SPI 14 0x4>;
+				reg = <0x17829000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17830000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x17830000 0x10000>,
+			    <0x17840000 0x10000>;
+			reg-names = "drv-0", "drv-1";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <1>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+				<SLEEP_TCS   2>,
+				<WAKE_TCS    2>,
+				<CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sdx65-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sdx65-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			<1 12 0xf08>,
+			<1 10 0xf08>,
+			<1 11 0xf08>;
+		clock-frequency = <19200000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index 07d611d2b7b5..1e8447176b10 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -108,6 +108,8 @@
 	renesas,no-ether-link;
 	phy-handle = <&phy0>;
 	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-idb824.2814",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
 	};
 };
diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts
index 2562cc9b5356..105f9c71f9fd 100644
--- a/arch/arm/boot/dts/r7s72100-gr-peach.dts
+++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts
@@ -129,6 +129,8 @@
 	phy-handle = <&phy0>;
 
 	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0007.c0f0",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
 
 		reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index 99acfe4fe11a..1c5acf694407 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -192,6 +192,8 @@
 	renesas,no-ether-link;
 	phy-handle = <&phy0>;
 	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-idb824.2814",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
 	};
 };
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 45cf75b5824c..b07b71307f24 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -608,6 +608,8 @@
 				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
 			clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
 			clock-frequency = <100000>;
 			power-domains = <&cpg_clocks>;
@@ -627,6 +629,8 @@
 				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
 			clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
 			clock-frequency = <100000>;
 			power-domains = <&cpg_clocks>;
@@ -646,6 +650,8 @@
 				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
 			clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
 			clock-frequency = <100000>;
 			power-domains = <&cpg_clocks>;
@@ -665,6 +671,8 @@
 				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
 			clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
 			clock-frequency = <100000>;
 			power-domains = <&cpg_clocks>;
diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
index d062d02865e7..69a5a44b8a2f 100644
--- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts
+++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
@@ -4,6 +4,28 @@
  *
  * Copyright (C) 2018 Renesas Electronics
  *
+ * As upstream Linux does not support XIP, it cannot run in 8 MiB of HyperRAM.
+ * Hence the 64 MiB of SDRAM on the sub-board needs to be enabled, which has
+ * the following ramifications:
+ *   - SCIF4 connected to the on-board USB-serial can no longer be used as the
+ *     serial console,
+ *   - Instead, SCIF2 is used as the serial console, by connecting a 3.3V TTL
+ *     USB-to-Serial adapter to the CMOS camera connector:
+ *       - RXD = CN17-9,
+ *       - TXD = CN17-10,
+ *       - GND = CN17-2 or CN17-17,
+ *   - The first Ethernet channel can no longer be used,
+ *   - USB Channel 1 loses the overcurrent input signal.
+ *
+ * Please make sure your sub-board matches the following switch settings:
+ *
+ *           SW6                SW6-1 set to SDRAM
+ *  ON                          SW6-2 set to Audio
+ * +---------------------+      SW6-3 set to DRP
+ * | =   =   = = =       |      SW6-4 set to CEU
+ * |   =   =             |      SW6-5 set to Ether2
+ * | 1 2 3 4 5 6 7 8 9 0 |      SW6-6 set to VDC6
+ * +---------------------+      SW6-7 set to VDC6
  */
 
 /dts-v1/;
@@ -17,9 +39,8 @@
 	compatible = "renesas,rza2mevb", "renesas,r7s9210";
 
 	aliases {
-		serial0 = &scif4;
-		ethernet0 = &ether0;
-		ethernet1 = &ether1;
+		serial0 = &scif2;
+		ethernet0 = &ether1;
 	};
 
 	chosen {
@@ -50,17 +71,17 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-red {
 			gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>;
 		};
-		green {
+		led-green {
 			gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>;
 		};
 	};
 
-	memory@40000000 {
+	memory@c000000 {
 		device_type = "memory";
-		reg = <0x40000000 0x00800000>;	 /* HyperRAM */
+		reg = <0x0c000000 0x04000000>;	/* SDRAM */
 	};
 };
 
@@ -72,17 +93,6 @@
 	status = "okay";
 };
 
-&ether0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&eth0_pins>;
-	status = "okay";
-	renesas,no-ether-link;
-	phy-handle = <&phy0>;
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
 &ether1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&eth1_pins>;
@@ -90,6 +100,8 @@
 	renesas,no-ether-link;
 	phy-handle = <&phy1>;
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id001c.c816",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
 	};
 };
@@ -99,6 +111,20 @@
 	clock-frequency = <24000000>;	/* 24MHz */
 };
 
+&i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	eeprom@50 {
+		compatible = "renesas,r1ex24128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
 /* High resolution System tick timers */
 &ostm0 {
 	status = "okay";
@@ -137,14 +163,19 @@
 			 <RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */
 	};
 
+	i2c3_pins: i2c3 {
+		pinmux = <RZA2_PINMUX(PORTD, 6, 1)>,	/* RIIC3SCL */
+			 <RZA2_PINMUX(PORTD, 7, 1)>;	/* RIIC3SDA */
+	};
+
 	keyboard_pins: keyboard {
 		pinmux = <RZA2_PINMUX(PORTJ, 1, 6)>;	/* IRQ0 */
 	};
 
 	/* Serial Console */
-	scif4_pins: serial4 {
-		pinmux = <RZA2_PINMUX(PORT9, 0, 4)>,	/* TxD4 */
-			 <RZA2_PINMUX(PORT9, 1, 4)>;	/* RxD4 */
+	scif2_pins: serial2 {
+		pinmux = <RZA2_PINMUX(PORTE, 2, 3)>,	/* TxD2 */
+			 <RZA2_PINMUX(PORTE, 1, 3)>;	/* RxD2 */
 	};
 
 	sdhi0_pins: sdhi0 {
@@ -165,8 +196,7 @@
 
 	usb1_pins: usb1 {
 		pinmux = <RZA2_PINMUX(PORTC, 0, 1)>,	/* VBUSIN1 */
-			 <RZA2_PINMUX(PORTC, 5, 1)>,	/* VBUSEN1 */
-			 <RZA2_PINMUX(PORT7, 5, 5)>;	/* OVRCUR1 */
+			 <RZA2_PINMUX(PORTC, 5, 1)>;	/* VBUSEN1 */
 	};
 };
 
@@ -176,9 +206,9 @@
 };
 
 /* Serial Console */
-&scif4 {
+&scif2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&scif4_pins>;
+	pinctrl-0 = <&scif2_pins>;
 
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi
index 85c0399b1339..fdeb0bc12cb7 100644
--- a/arch/arm/boot/dts/r7s9210.dtsi
+++ b/arch/arm/boot/dts/r7s9210.dtsi
@@ -236,6 +236,8 @@
 				     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD 87>;
 			power-domains = <&cpg>;
 			clock-frequency = <100000>;
@@ -255,6 +257,8 @@
 				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD 86>;
 			power-domains = <&cpg>;
 			clock-frequency = <100000>;
@@ -274,6 +278,8 @@
 				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD 85>;
 			power-domains = <&cpg>;
 			clock-frequency = <100000>;
@@ -293,6 +299,8 @@
 				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
 			clocks = <&cpg CPG_MOD 84>;
 			power-domains = <&cpg>;
 			clock-frequency = <100000>;
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index b088e8e351d5..e81a7213d304 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -199,6 +199,7 @@
 		reg-io-width = <4>;
 		smsc,irq-active-high;
 		smsc,irq-push-pull;
+		reset-gpios = <&pfc 270 GPIO_ACTIVE_LOW>;
 		vdd33a-supply = <&ape6evm_fixed_3v3>;
 		vddvario-supply = <&ape6evm_fixed_1v8>;
 	};
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index e5fb1ce261f7..c39066967053 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -72,50 +72,6 @@
 		power-domains = <&pd_a3bc>;
 	};
 
-	dmac: dma-multiplexer {
-		compatible = "renesas,shdma-mux";
-		#dma-cells = <1>;
-		dma-channels = <20>;
-		dma-requests = <256>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		dma0: dma-controller@e6700020 {
-			compatible = "renesas,shdma-r8a73a4";
-			reg = <0 0xe6700020 0 0x89e0>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "error",
-					"ch0", "ch1", "ch2", "ch3",
-					"ch4", "ch5", "ch6", "ch7",
-					"ch8", "ch9", "ch10", "ch11",
-					"ch12", "ch13", "ch14", "ch15",
-					"ch16", "ch17", "ch18", "ch19";
-			clocks = <&mstp2_clks R8A73A4_CLK_DMAC>;
-			power-domains = <&pd_a3sp>;
-		};
-	};
-
 	i2c5: i2c@e60b0000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index d960c2767f61..fa09295052c6 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -170,7 +170,10 @@
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0007.c0f1",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
+		reset-gpios = <&pfc 18 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -193,6 +196,19 @@
 
 &i2c0 {
 	status = "okay";
+
+	wm8978: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8978";
+		reg = <0x1a>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
 	touchscreen@55 {
 		compatible = "sitronix,st1232";
 		reg = <0x55>;
@@ -202,12 +218,6 @@
 		pinctrl-names = "default";
 		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
 	};
-
-	wm8978: codec@1a {
-		#sound-dai-cells = <0>;
-		compatible = "wlf,wm8978";
-		reg = <0x1a>;
-	};
 };
 
 &i2c2 {
@@ -263,7 +273,7 @@
 		function = "lcd0";
 	};
 
-	lcd0_mux {
+	lcd0-mux-hog {
 		/* DBGMD/LCDC0/FSIA MUX */
 		gpio-hog;
 		gpios = <176 0>;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 98c3fbd89fa6..33ac4bd1e63b 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -7,6 +7,9 @@
  */
 
 /dts-v1/;
+
+#include <dt-bindings/media/video-interfaces.h>
+
 #include "r8a7742-iwg21d-q7.dts"
 
 / {
@@ -44,6 +47,22 @@
 		#clock-cells = <0>;
 		clock-frequency = <26000000>;
 	};
+
+	reg_1p8v: 1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p8v: 2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
 };
 
 &avb {
@@ -66,6 +85,8 @@
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1560",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		micrel,led-mode = <1>;
 	};
@@ -73,10 +94,10 @@
 
 &gpio0 {
 	/* Disable hogging GP0_18 to output LOW */
-	/delete-node/ qspi_en;
+	/delete-node/ qspi-en-hog;
 
 	/* Hog GP0_18 to output HIGH to enable VIN2 */
-	vin2_en {
+	vin2-en-hog {
 		gpio-hog;
 		gpios = <18 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -91,92 +112,20 @@
 	status = "okay";
 };
 
-&i2c0 {
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-		clocks = <&mclk_cam1>;
-		clock-names = "xclk";
-
-		port {
-			ov5640_0: endpoint {
-				bus-width = <8>;
-				data-shift = <2>;
-				bus-type = <6>;
-				pclk-sample = <1>;
-				remote-endpoint = <&vin0ep>;
-			};
-		};
-	};
-};
-
 &i2c1 {
 	pinctrl-0 = <&i2c1_pins>;
 	pinctrl-names = "default";
 
-	status = "okay";
+	/* status set to "okay" when needed by camera configuration below */
 	clock-frequency = <400000>;
-
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-		clocks = <&mclk_cam2>;
-		clock-names = "xclk";
-
-		port {
-			ov5640_1: endpoint {
-				bus-width = <8>;
-				data-shift = <2>;
-				bus-type = <6>;
-				pclk-sample = <1>;
-				remote-endpoint = <&vin1ep>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-		clocks = <&mclk_cam3>;
-		clock-names = "xclk";
-
-		port {
-			ov5640_2: endpoint {
-				bus-width = <8>;
-				data-shift = <2>;
-				bus-type = <6>;
-				pclk-sample = <1>;
-				remote-endpoint = <&vin2ep>;
-			};
-		};
-	};
 };
 
 &i2c3 {
 	pinctrl-0 = <&i2c3_pins>;
 	pinctrl-names = "default";
 
-	status = "okay";
+	/* status set to "okay" when needed by camera configuration below */
 	clock-frequency = <400000>;
-
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-		clocks = <&mclk_cam4>;
-		clock-names = "xclk";
-
-		port {
-			ov5640_3: endpoint {
-				bus-width = <8>;
-				data-shift = <2>;
-				bus-type = <6>;
-				pclk-sample = <1>;
-				remote-endpoint = <&vin3ep>;
-			};
-		};
-	};
 };
 
 &pfc {
@@ -267,6 +216,22 @@
 	cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
 };
 
+/*
+ * Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints
+ *
+ * (un)comment the #include statements to change configuration
+ */
+
+/* 8bit CMOS Camera 1 (J13) */
+#define CAM_PARENT_I2C		i2c0
+#define MCLK_CAM		mclk_cam1
+#define CAM_EP			cam0ep
+#define VIN_EP			vin0ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi"
+
+#ifdef CAM_ENABLED
 &vin0 {
 	/*
 	 * Set SW2 switch on the SOM to 'ON'
@@ -278,13 +243,29 @@
 
 	port {
 		vin0ep: endpoint {
-			remote-endpoint = <&ov5640_0>;
+			remote-endpoint = <&cam0ep>;
 			bus-width = <8>;
-			bus-type = <6>;
+			bus-type = <MEDIA_BUS_TYPE_BT656>;
 		};
 	};
 };
-
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
+
+/* 8bit CMOS Camera 2 (J14) */
+#define CAM_PARENT_I2C		i2c1
+#define MCLK_CAM		mclk_cam2
+#define CAM_EP			cam1ep
+#define VIN_EP			vin1ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi"
+
+#ifdef CAM_ENABLED
 &vin1 {
 	/* Set SW1 switch on the SOM to 'ON' */
 	status = "okay";
@@ -293,13 +274,30 @@
 
 	port {
 		vin1ep: endpoint {
-			remote-endpoint = <&ov5640_1>;
+			remote-endpoint = <&cam1ep>;
 			bus-width = <8>;
-			bus-type = <6>;
+			bus-type = <MEDIA_BUS_TYPE_BT656>;
 		};
 	};
 };
 
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
+
+/* 8bit CMOS Camera 3 (J12) */
+#define CAM_PARENT_I2C		i2c2
+#define MCLK_CAM		mclk_cam3
+#define CAM_EP			cam2ep
+#define VIN_EP			vin2ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi"
+
+#ifdef CAM_ENABLED
 &vin2 {
 	status = "okay";
 	pinctrl-0 = <&vin2_pins>;
@@ -307,14 +305,30 @@
 
 	port {
 		vin2ep: endpoint {
-			remote-endpoint = <&ov5640_2>;
+			remote-endpoint = <&cam2ep>;
 			bus-width = <8>;
 			data-shift = <8>;
-			bus-type = <6>;
+			bus-type = <MEDIA_BUS_TYPE_BT656>;
 		};
 	};
 };
-
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
+
+/* 8bit CMOS Camera 4 (J11) */
+#define CAM_PARENT_I2C		i2c3
+#define MCLK_CAM		mclk_cam4
+#define CAM_EP			cam3ep
+#define VIN_EP			vin3ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi"
+
+#ifdef CAM_ENABLED
 &vin3 {
 	status = "okay";
 	pinctrl-0 = <&vin3_pins>;
@@ -322,9 +336,15 @@
 
 	port {
 		vin3ep: endpoint {
-			remote-endpoint = <&ov5640_3>;
+			remote-endpoint = <&cam3ep>;
 			bus-width = <8>;
-			bus-type = <6>;
+			bus-type = <MEDIA_BUS_TYPE_BT656>;
 		};
 	};
 };
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
new file mode 100644
index 000000000000..c73160df619d
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file ties a VIN interface with a single ov5640 sensor on
+ * the iWave-RZ/G1H Qseven board development platform connected with the
+ * camera daughter board.
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/media/video-interfaces.h>
+
+#define CAM_ENABLED	1
+
+&CAM_PARENT_I2C {
+	status = "okay";
+
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		clocks = <&MCLK_CAM>;
+		clock-names = "xclk";
+		AVDD-supply = <&reg_2p8v>;
+		DOVDD-supply = <&reg_2p8v>;
+		DVDD-supply = <&reg_1p8v>;
+		status = "okay";
+
+		port {
+			CAM_EP: endpoint {
+				bus-width = <8>;
+				data-shift = <2>;
+				bus-type = <MEDIA_BUS_TYPE_BT656>;
+				pclk-sample = <1>;
+				remote-endpoint = <&VIN_EP>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
new file mode 100644
index 000000000000..a7f5cfec64b8
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file ties a VIN interface with a single ov7725 sensor on
+ * the iWave-RZ/G1H Qseven board development platform connected with the
+ * camera daughter board.
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/media/video-interfaces.h>
+
+#define CAM_ENABLED	1
+
+&CAM_PARENT_I2C {
+	status = "okay";
+
+	ov7725@21 {
+		compatible = "ovti,ov7725";
+		reg = <0x21>;
+		clocks = <&MCLK_CAM>;
+		status = "okay";
+
+		port {
+			CAM_EP: endpoint {
+				bus-width = <8>;
+				bus-type = <MEDIA_BUS_TYPE_BT656>;
+				remote-endpoint = <&VIN_EP>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index 0063ef92f50e..64102b664055 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -175,6 +175,8 @@
 	status = "okay";
 
 	phy3: ethernet-phy@3 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <3>;
 		micrel,led-mode = <1>;
 	};
@@ -224,7 +226,7 @@
 };
 
 &gpio0 {
-	touch-interrupt {
+	touch-interrupt-hog {
 		gpio-hog;
 		gpios = <24 GPIO_ACTIVE_LOW>;
 		input;
@@ -232,7 +234,7 @@
 };
 
 &gpio1 {
-	can-trx-en-gpio{
+	can-trx-en-hog {
 		gpio-hog;
 		gpios = <28 GPIO_ACTIVE_HIGH>;
 		output-low;
@@ -387,8 +389,8 @@
 
 	rcar_sound,dai {
 		dai0 {
-			playback = <&ssi4 &src4 &dvc1>;
-			capture = <&ssi3 &src3 &dvc0>;
+			playback = <&ssi4>, <&src4>, <&dvc1>;
+			capture = <&ssi3>, <&src3>, <&dvc0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
index 5621c9ed698f..b281a4d164b0 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
+++ b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
@@ -37,7 +37,7 @@
 
 &gpio0 {
 	/* GP0_18 set low to select QSPI. Doing so will disable VIN2 */
-	qspi_en {
+	qspi-en-hog {
 		gpio-hog;
 		gpios = <18 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
index 6a78c813057b..16d146db824a 100644
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -47,7 +47,6 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -56,6 +55,7 @@
 			clock-frequency = <1400000000>;
 			clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
 			power-domains = <&sysc R8A7742_PD_CA15_CPU0>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA15>;
 			capacity-dmips-mhz = <1024>;
 			voltage-tolerance = <1>; /* 1% */
@@ -77,6 +77,7 @@
 			clock-frequency = <1400000000>;
 			clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
 			power-domains = <&sysc R8A7742_PD_CA15_CPU1>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA15>;
 			capacity-dmips-mhz = <1024>;
 			voltage-tolerance = <1>; /* 1% */
@@ -98,6 +99,7 @@
 			clock-frequency = <1400000000>;
 			clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
 			power-domains = <&sysc R8A7742_PD_CA15_CPU2>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA15>;
 			capacity-dmips-mhz = <1024>;
 			voltage-tolerance = <1>; /* 1% */
@@ -119,6 +121,7 @@
 			clock-frequency = <1400000000>;
 			clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
 			power-domains = <&sysc R8A7742_PD_CA15_CPU3>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA15>;
 			capacity-dmips-mhz = <1024>;
 			voltage-tolerance = <1>; /* 1% */
@@ -367,13 +370,13 @@
 		apmu@e6151000 {
 			compatible = "renesas,r8a7742-apmu", "renesas,apmu";
 			reg = <0 0xe6151000 0 0x188>;
-			cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
+			cpus = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
 		};
 
 		apmu@e6152000 {
 			compatible = "renesas,r8a7742-apmu", "renesas,apmu";
 			reg = <0 0xe6152000 0 0x188>;
-			cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
+			cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 		};
 
 		rst: reset-controller@e6160000 {
@@ -599,7 +602,9 @@
 		iic3: i2c@e60b0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7742";
+			compatible = "renesas,iic-r8a7742",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
 			reg = <0 0xe60b0000 0 0x425>;
 			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 926>;
@@ -628,7 +633,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7742",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -640,11 +645,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
@@ -750,6 +755,7 @@
 			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
 			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
 			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			#address-cells = <1>;
@@ -1149,7 +1155,7 @@
 
 		rcar_sound: sound@ec500000 {
 			/*
-			 * #sound-dai-cells is required
+			 * #sound-dai-cells is required if simple-card
 			 *
 			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
 			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
@@ -1292,7 +1298,7 @@
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi-1 {
-					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>,
 					       <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
index 807e7d0d6b62..ff274bfcb664 100644
--- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
+++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "r8a7743.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "SK-RZG1M";
@@ -61,7 +62,7 @@
 };
 
 &ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
 	pinctrl-names = "default";
 
 	phy-handle = <&phy1>;
@@ -69,9 +70,12 @@
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index f444e418f408..2245d19a23bb 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -49,7 +49,6 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -59,6 +58,7 @@
 			clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
 			clock-latency = <300000>; /* 300 us */
 			power-domains = <&sysc R8A7743_PD_CA15_CPU0>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA15>;
 
 			/* kHz - uV - OPPs unknown yet */
@@ -78,6 +78,7 @@
 			clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
 			clock-latency = <300000>; /* 300 us */
 			power-domains = <&sysc R8A7743_PD_CA15_CPU1>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA15>;
 
 			/* kHz - uV - OPPs unknown yet */
@@ -139,6 +140,7 @@
 			compatible = "renesas,r8a7743-wdt",
 				     "renesas,rcar-gen2-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
 			resets = <&cpg 402>;
@@ -293,7 +295,7 @@
 		apmu@e6152000 {
 			compatible = "renesas,r8a7743-apmu", "renesas,apmu";
 			reg = <0 0xe6152000 0 0x188>;
-			cpus = <&cpu0 &cpu1>;
+			cpus = <&cpu0>, <&cpu1>;
 		};
 
 		rst: reset-controller@e6160000 {
@@ -551,7 +553,9 @@
 			/* doesn't need pinmux */
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7743";
+			compatible = "renesas,iic-r8a7743",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
 			reg = <0 0xe60b0000 0 0x425>;
 			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 926>;
@@ -580,7 +584,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7743",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -592,11 +596,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
@@ -702,6 +706,7 @@
 			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
 			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			#address-cells = <1>;
@@ -1185,7 +1190,7 @@
 
 		rcar_sound: sound@ec500000 {
 			/*
-			 * #sound-dai-cells is required
+			 * #sound-dai-cells is required if simple-card
 			 *
 			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
 			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 0442aad4f9db..aa13841f9781 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -49,7 +49,6 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -59,6 +58,7 @@
 			clocks = <&cpg CPG_CORE R8A7744_CLK_Z>;
 			clock-latency = <300000>; /* 300 us */
 			power-domains = <&sysc R8A7744_PD_CA15_CPU0>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA15>;
 
 			/* kHz - uV - OPPs unknown yet */
@@ -78,6 +78,7 @@
 			clocks = <&cpg CPG_CORE R8A7744_CLK_Z>;
 			clock-latency = <300000>; /* 300 us */
 			power-domains = <&sysc R8A7744_PD_CA15_CPU1>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA15>;
 
 			/* kHz - uV - OPPs unknown yet */
@@ -139,6 +140,7 @@
 			compatible = "renesas,r8a7744-wdt",
 				     "renesas,rcar-gen2-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
 			resets = <&cpg 402>;
@@ -293,7 +295,7 @@
 		apmu@e6152000 {
 			compatible = "renesas,r8a7744-apmu", "renesas,apmu";
 			reg = <0 0xe6152000 0 0x188>;
-			cpus = <&cpu0 &cpu1>;
+			cpus = <&cpu0>, <&cpu1>;
 		};
 
 		rst: reset-controller@e6160000 {
@@ -551,7 +553,9 @@
 			/* doesn't need pinmux */
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "renesas,iic-r8a7744";
+			compatible = "renesas,iic-r8a7744",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
 			reg = <0 0xe60b0000 0 0x425>;
 			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 926>;
@@ -580,7 +584,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7744",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -592,11 +596,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
@@ -702,6 +706,7 @@
 			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
 			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
 			power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			#address-cells = <1>;
@@ -1185,7 +1190,7 @@
 
 		rcar_sound: sound@ec500000 {
 			/*
-			 * #sound-dai-cells is required
+			 * #sound-dai-cells is required if simple-card
 			 *
 			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
 			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
index 1c7b37a01f0a..c105932f642e 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -123,6 +123,8 @@
 	 * On some older versions of the platform (before R4.0) the phy address
 	 * may be 1 or 3. The address is fixed to 3 for R4.0 onwards.
 	 */
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <3>;
 		micrel,led-mode = <1>;
 	};
@@ -289,8 +291,8 @@
 
 	rcar_sound,dai {
 		dai0 {
-			playback = <&ssi3 &src3 &dvc0>;
-			capture = <&ssi4 &src4 &dvc1>;
+			playback = <&ssi3>, <&src3>, <&dvc0>;
+			capture = <&ssi4>, <&src4>, <&dvc1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
index db72a801abe5..0a75e8c79acc 100644
--- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
+++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 #include "r8a7745.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "SK-RZG1E";
@@ -56,7 +57,7 @@
 };
 
 &ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
 	pinctrl-names = "default";
 
 	phy-handle = <&phy1>;
@@ -64,9 +65,12 @@
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
+		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 0f14ac22921d..44688b8431c3 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -64,7 +64,6 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -73,6 +72,7 @@
 			clock-frequency = <1000000000>;
 			clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>;
 			power-domains = <&sysc R8A7745_PD_CA7_CPU0>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA7>;
 		};
 
@@ -83,6 +83,7 @@
 			clock-frequency = <1000000000>;
 			clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>;
 			power-domains = <&sysc R8A7745_PD_CA7_CPU1>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA7>;
 		};
 
@@ -258,7 +259,7 @@
 		apmu@e6151000 {
 			compatible = "renesas,r8a7745-apmu", "renesas,apmu";
 			reg = <0 0xe6151000 0 0x188>;
-			cpus = <&cpu0 &cpu1>;
+			cpus = <&cpu0>, <&cpu1>;
 		};
 
 		rst: reset-controller@e6160000 {
@@ -269,6 +270,7 @@
 		rwdt: watchdog@e6020000 {
 			compatible = "renesas,r8a7745-wdt",
 				     "renesas,rcar-gen2-wdt";
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0 0xe6020000 0 0x0c>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
@@ -523,7 +525,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7745",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -535,11 +537,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
@@ -645,6 +647,7 @@
 			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
 			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			#address-cells = <1>;
@@ -1117,7 +1120,7 @@
 
 		rcar_sound: sound@ec500000 {
 			/*
-			 * #sound-dai-cells is required
+			 * #sound-dai-cells is required if simple-card
 			 *
 			 * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
 			 * Multi  DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 8ac61b50aec0..644802285249 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -79,6 +79,8 @@
 	status = "okay";
 
 	phy3: ethernet-phy@3 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <3>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
@@ -114,7 +116,7 @@
 };
 
 &gpio2 {
-	interrupt-fixup {
+	interrupt-fixup-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;
 		line-name = "hdmi-hpd-int";
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 691b1a131c87..a5cf663a0118 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -25,7 +25,6 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -34,6 +33,7 @@
 			clock-frequency = <1000000000>;
 			clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
 			power-domains = <&sysc R8A77470_PD_CA7_CPU0>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA7>;
 		};
 
@@ -44,6 +44,7 @@
 			clock-frequency = <1000000000>;
 			clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
 			power-domains = <&sysc R8A77470_PD_CA7_CPU1>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA7>;
 		};
 
@@ -90,6 +91,7 @@
 			compatible = "renesas,r8a77470-wdt",
 				     "renesas,rcar-gen2-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
 			resets = <&cpg 402>;
@@ -205,7 +207,7 @@
 		apmu@e6151000 {
 			compatible = "renesas,r8a77470-apmu", "renesas,apmu";
 			reg = <0 0xe6151000 0 0x188>;
-			cpus = <&cpu0 &cpu1>;
+			cpus = <&cpu0>, <&cpu1>;
 		};
 
 		rst: reset-controller@e6160000 {
@@ -355,7 +357,7 @@
 			status = "disabled";
 		};
 
-		usbphy0: usb-phy@e6590100 {
+		usbphy0: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a77470",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -367,7 +369,7 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
@@ -391,7 +393,7 @@
 			status = "disabled";
 		};
 
-		usbphy1: usb-phy@e6598100 {
+		usbphy1: usb-phy-controller@e6598100 {
 			compatible = "renesas,usb-phy-r8a77470",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6598100 0 0x100>;
@@ -403,7 +405,7 @@
 			resets = <&cpg 706>;
 			status = "disabled";
 
-			usb1: usb-channel@0 {
+			usb1: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
@@ -537,6 +539,7 @@
 			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
 			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
 			power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index 6c7b07c4b9d3..9b65d246e583 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -63,7 +63,7 @@
 
 &bsc {
 	ethernet@18300000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
+		compatible = "smsc,lan89218", "smsc,lan9115";
 		reg = <0x18300000 0x1000>;
 
 		phy-mode = "mii";
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index c9f8735860bf..8d4530ed2fc6 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -166,6 +166,7 @@
 		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_I2C1>;
 		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <5>;
 		status = "disabled";
 	};
 
@@ -177,6 +178,7 @@
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_I2C2>;
 		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <5>;
 		status = "disabled";
 	};
 
@@ -188,6 +190,7 @@
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_I2C3>;
 		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <5>;
 		status = "disabled";
 	};
 
@@ -238,7 +241,7 @@
 
 	rcar_sound: sound@ffd90000 {
 		/*
-		 * #sound-dai-cells is required
+		 * #sound-dai-cells is required if simple-card
 		 *
 		 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
 		 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index d2240b89ee52..fd40890bd77b 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "r8a7779.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -52,7 +53,7 @@
 	};
 
 	ethernet@18000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
+		compatible = "smsc,lan89218", "smsc,lan9115";
 		reg = <0x18000000 0x100>;
 		pinctrl-0 = <&ethernet_pins>;
 		pinctrl-names = "default";
@@ -66,6 +67,51 @@
 		vdd33a-supply = <&fixedregulator3v3>;
 	};
 
+	keyboard-irq {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keyboard_irq_pins>;
+		pinctrl-names = "default";
+
+		interrupt-parent = <&gpio0>;
+
+		key-1 {
+			interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+			linux,code = <KEY_1>;
+			label = "SW1-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+			linux,code = <KEY_2>;
+			label = "SW1-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	keyboard-gpio {
+		compatible = "gpio-keys-polled";
+		poll-interval = <50>;
+
+		pinctrl-0 = <&keyboard_gpio_pins>;
+		pinctrl-names = "default";
+
+		key-3 {
+			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW1-3";
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW1-4";
+			debounce-interval = <20>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		led2 {
@@ -145,7 +191,7 @@
 	status = "okay";
 
 	clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>;
-	clock-names = "du", "dclkin.0";
+	clock-names = "du.0", "dclkin.0";
 
 	ports {
 		port@0 {
@@ -161,6 +207,20 @@
 	};
 };
 
+&gpio0 {
+	keyboard-irq-hog {
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+};
+
 &irqpin0 {
 	status = "okay";
 };
@@ -223,6 +283,15 @@
 		groups = "hspi0";
 		function = "hspi0";
 	};
+
+	keyboard_irq_pins: keyboard-irq {
+		pins = "GP_0_17", "GP_0_18";
+		bias-pull-up;
+	};
+	keyboard_gpio_pins: keyboard-gpio {
+		pins = "GP_0_19", "GP_0_20";
+		bias-pull-up;
+	};
 };
 
 &sata {
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 74d7e9084eab..97b767d81d92 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -198,6 +198,7 @@
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <5>;
 		status = "disabled";
 	};
 
@@ -209,6 +210,7 @@
 		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <5>;
 		status = "disabled";
 	};
 
@@ -220,6 +222,7 @@
 		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		i2c-scl-internal-delay-ns = <5>;
 		status = "disabled";
 	};
 
@@ -321,6 +324,69 @@
 		status = "disabled";
 	};
 
+	pwm0: pwm@ffe50000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe50000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ffe51000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe51000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ffe52000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe52000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ffe53000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe53000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm4: pwm@ffe54000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe54000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm5: pwm@ffe55000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe55000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	pwm6: pwm@ffe56000 {
+		compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar";
+		reg = <0xffe56000 0x8>;
+		clocks = <&mstp0_clks R8A7779_CLK_PWM>;
+		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
 	pfc: pinctrl@fffc0000 {
 		compatible = "renesas,pfc-r8a7779";
 		reg = <0xfffc0000 0x23c>;
@@ -463,6 +529,7 @@
 		reg = <0xfff80000 0x40000>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_DU>;
+		clock-names = "du.0";
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 
@@ -550,7 +617,8 @@
 			compatible = "renesas,r8a7779-mstp-clocks",
 				     "renesas,cpg-mstp-clocks";
 			reg = <0xffc80030 4>;
-			clocks = <&cpg_clocks R8A7779_CLK_S>,
+			clocks = <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_S>,
 				 <&cpg_clocks R8A7779_CLK_P>,
 				 <&cpg_clocks R8A7779_CLK_P>,
 				 <&cpg_clocks R8A7779_CLK_P>,
@@ -568,20 +636,21 @@
 				 <&cpg_clocks R8A7779_CLK_P>;
 			#clock-cells = <1>;
 			clock-indices = <
-				R8A7779_CLK_HSPI R8A7779_CLK_TMU2
-				R8A7779_CLK_TMU1 R8A7779_CLK_TMU0
-				R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0
-				R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4
-				R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2
-				R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0
-				R8A7779_CLK_I2C3 R8A7779_CLK_I2C2
-				R8A7779_CLK_I2C1 R8A7779_CLK_I2C0
+				R8A7779_CLK_PWM R8A7779_CLK_HSPI
+				R8A7779_CLK_TMU2 R8A7779_CLK_TMU1
+				R8A7779_CLK_TMU0 R8A7779_CLK_HSCIF1
+				R8A7779_CLK_HSCIF0 R8A7779_CLK_SCIF5
+				R8A7779_CLK_SCIF4 R8A7779_CLK_SCIF3
+				R8A7779_CLK_SCIF2 R8A7779_CLK_SCIF1
+				R8A7779_CLK_SCIF0 R8A7779_CLK_I2C3
+				R8A7779_CLK_I2C2 R8A7779_CLK_I2C1
+				R8A7779_CLK_I2C0
 			>;
 			clock-output-names =
-				"hspi", "tmu2", "tmu1", "tmu0", "hscif1",
-				"hscif0", "scif5", "scif4", "scif3", "scif2",
-				"scif1", "scif0", "i2c3", "i2c2", "i2c1",
-				"i2c0";
+				"pwm", "hspi", "tmu2", "tmu1", "tmu0",
+				"hscif1", "hscif0", "scif5", "scif4", "scif3",
+				"scif2", "scif1", "scif0", "i2c3", "i2c2",
+				"i2c1", "i2c0";
 		};
 		mstp1_clks: clocks@ffc80034 {
 			compatible = "renesas,r8a7779-mstp-clocks",
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 09a152b91557..5ad5349a50dc 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -53,6 +53,9 @@
 		i2c11 = &i2cexio1;
 		i2c12 = &i2chdmi;
 		i2c13 = &i2cpwr;
+		mmc0 = &mmcif1;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
@@ -78,6 +81,9 @@
 	keyboard {
 		compatible = "gpio-keys";
 
+		pinctrl-0 = <&keyboard_pins>;
+		pinctrl-names = "default";
+
 		one {
 			linux,code = <KEY_1>;
 			label = "SW2-1";
@@ -436,7 +442,7 @@
 				compatible = "dlg,da9063-rtc";
 			};
 
-			wdt {
+			watchdog {
 				compatible = "dlg,da9063-watchdog";
 			};
 		};
@@ -656,10 +662,15 @@
 		groups = "audio_clk_a";
 		function = "audio_clk";
 	};
+
+	keyboard_pins: keyboard {
+		pins = "GP_1_14", "GP_1_24", "GP_1_26", "GP_1_28";
+		bias-pull-up;
+	};
 };
 
 &ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
 	pinctrl-names = "default";
 
 	phy-handle = <&phy1>;
@@ -667,6 +678,8 @@
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
@@ -908,7 +921,7 @@
 };
 
 &rcar_sound {
-	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
 	pinctrl-names = "default";
 
 	/* Single DAI */
@@ -918,8 +931,8 @@
 
 	rcar_sound,dai {
 		dai0 {
-			playback = <&ssi0 &src2 &dvc0>;
-			capture  = <&ssi1 &src3 &dvc1>;
+			playback = <&ssi0>, <&src2>, <&dvc0>;
+			capture  = <&ssi1>, <&src3>, <&dvc1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index 6a457bc9280a..fe14727eefe1 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -191,7 +191,7 @@
 };
 
 &ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
 	pinctrl-names = "default";
 
 	phy-handle = <&phy1>;
@@ -199,6 +199,8 @@
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
@@ -321,7 +323,7 @@
 
 &iic3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&iic3_pins &pmic_irq_pins>;
+	pinctrl-0 = <&iic3_pins>, <&pmic_irq_pins>;
 	status = "okay";
 
 	pmic@58 {
@@ -339,7 +341,7 @@
 			compatible = "dlg,da9063-rtc";
 		};
 
-		wdt {
+		watchdog {
 			compatible = "dlg,da9063-watchdog";
 		};
 	};
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index b0569b4ea5c8..46fb81f5062f 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -69,7 +69,6 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -78,6 +77,7 @@
 			clock-frequency = <1300000000>;
 			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
 			power-domains = <&sysc R8A7790_PD_CA15_CPU0>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA15>;
 			capacity-dmips-mhz = <1024>;
 			voltage-tolerance = <1>; /* 1% */
@@ -99,6 +99,7 @@
 			clock-frequency = <1300000000>;
 			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
 			power-domains = <&sysc R8A7790_PD_CA15_CPU1>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA15>;
 			capacity-dmips-mhz = <1024>;
 			voltage-tolerance = <1>; /* 1% */
@@ -120,6 +121,7 @@
 			clock-frequency = <1300000000>;
 			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
 			power-domains = <&sysc R8A7790_PD_CA15_CPU2>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA15>;
 			capacity-dmips-mhz = <1024>;
 			voltage-tolerance = <1>; /* 1% */
@@ -141,6 +143,7 @@
 			clock-frequency = <1300000000>;
 			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
 			power-domains = <&sysc R8A7790_PD_CA15_CPU3>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA15>;
 			capacity-dmips-mhz = <1024>;
 			voltage-tolerance = <1>; /* 1% */
@@ -162,6 +165,7 @@
 			clock-frequency = <780000000>;
 			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
 			power-domains = <&sysc R8A7790_PD_CA7_CPU0>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA7>;
 			capacity-dmips-mhz = <539>;
 		};
@@ -173,6 +177,7 @@
 			clock-frequency = <780000000>;
 			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
 			power-domains = <&sysc R8A7790_PD_CA7_CPU1>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA7>;
 			capacity-dmips-mhz = <539>;
 		};
@@ -184,6 +189,7 @@
 			clock-frequency = <780000000>;
 			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
 			power-domains = <&sysc R8A7790_PD_CA7_CPU2>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA7>;
 			capacity-dmips-mhz = <539>;
 		};
@@ -195,6 +201,7 @@
 			clock-frequency = <780000000>;
 			clocks = <&cpg CPG_CORE R8A7790_CLK_Z2>;
 			power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA7>;
 			capacity-dmips-mhz = <539>;
 		};
@@ -267,6 +274,7 @@
 			compatible = "renesas,r8a7790-wdt",
 				     "renesas,rcar-gen2-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 			resets = <&cpg 402>;
@@ -368,6 +376,17 @@
 			reg = <0 0xe6060000 0 0x250>;
 		};
 
+		tpu: pwm@e60f0000 {
+			compatible = "renesas,tpu-r8a7790", "renesas,tpu";
+			reg = <0 0xe60f0000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		cpg: clock-controller@e6150000 {
 			compatible = "renesas,r8a7790-cpg-mssr";
 			reg = <0 0xe6150000 0 0x1000>;
@@ -381,13 +400,13 @@
 		apmu@e6151000 {
 			compatible = "renesas,r8a7790-apmu", "renesas,apmu";
 			reg = <0 0xe6151000 0 0x188>;
-			cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
+			cpus = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
 		};
 
 		apmu@e6152000 {
 			compatible = "renesas,r8a7790-apmu", "renesas,apmu";
 			reg = <0 0xe6152000 0 0x188>;
-			cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
+			cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 		};
 
 		rst: reset-controller@e6160000 {
@@ -646,7 +665,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7790",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -658,11 +677,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
@@ -768,6 +787,7 @@
 			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
 			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			#address-cells = <1>;
@@ -1028,6 +1048,76 @@
 			status = "disabled";
 		};
 
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
 		can0: can@e6e80000 {
 			compatible = "renesas,can-r8a7790",
 				     "renesas,rcar-gen2-can";
@@ -1100,7 +1190,7 @@
 
 		rcar_sound: sound@ec500000 {
 			/*
-			 * #sound-dai-cells is required
+			 * #sound-dai-cells is required if simple-card
 			 *
 			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
 			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
@@ -1243,7 +1333,7 @@
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi-1 {
-					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>,
 					       <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index f603cba5441f..26a40782cc89 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -53,6 +53,9 @@
 		i2c12 = &i2cexio1;
 		i2c13 = &i2chdmi;
 		i2c14 = &i2cexio4;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi1;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
@@ -78,6 +81,9 @@
 	keyboard {
 		compatible = "gpio-keys";
 
+		pinctrl-0 = <&keyboard_pins>;
+		pinctrl-names = "default";
+
 		key-1 {
 			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_1>;
@@ -615,10 +621,15 @@
 		groups = "audio_clk_a";
 		function = "audio_clk";
 	};
+
+	keyboard_pins: keyboard {
+		pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
+		bias-pull-up;
+	};
 };
 
 &ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
 	pinctrl-names = "default";
 
 	phy-handle = <&phy1>;
@@ -626,6 +637,8 @@
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
@@ -792,7 +805,7 @@
 			compatible = "dlg,da9063-rtc";
 		};
 
-		wdt {
+		watchdog {
 			compatible = "dlg,da9063-watchdog";
 		};
 	};
@@ -878,7 +891,7 @@
 };
 
 &rcar_sound {
-	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
 	pinctrl-names = "default";
 
 	/* Single DAI */
@@ -888,8 +901,8 @@
 
 	rcar_sound,dai {
 		dai0 {
-			playback = <&ssi0 &src2 &dvc0>;
-			capture  = <&ssi1 &src3 &dvc1>;
+			playback = <&ssi0>, <&src2>, <&dvc0>;
+			capture  = <&ssi1>, <&src3>, <&dvc1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index c6d563fb7ec7..ec0a20d5130d 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -28,6 +28,8 @@
 		serial0 = &scif0;
 		i2c9 = &gpioi2c2;
 		i2c10 = &i2chdmi;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi2;
 	};
 
 	chosen {
@@ -292,7 +294,7 @@
 };
 
 &ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
 	pinctrl-names = "default";
 
 	phy-handle = <&phy1>;
@@ -300,6 +302,8 @@
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
@@ -386,7 +390,7 @@
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 
-		wdt {
+		watchdog {
 			compatible = "dlg,da9063-watchdog";
 		};
 	};
@@ -494,7 +498,7 @@
 };
 
 &rcar_sound {
-	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 87f0d6dc3e5a..b9d34147628e 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -68,7 +68,6 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -77,6 +76,7 @@
 			clock-frequency = <1500000000>;
 			clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
 			power-domains = <&sysc R8A7791_PD_CA15_CPU0>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA15>;
 			voltage-tolerance = <1>; /* 1% */
 			clock-latency = <300000>; /* 300 us */
@@ -97,6 +97,7 @@
 			clock-frequency = <1500000000>;
 			clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
 			power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA15>;
 			voltage-tolerance = <1>; /* 1% */
 			clock-latency = <300000>; /* 300 us */
@@ -160,6 +161,7 @@
 			compatible = "renesas,r8a7791-wdt",
 				     "renesas,rcar-gen2-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 			resets = <&cpg 402>;
@@ -315,7 +317,7 @@
 		apmu@e6152000 {
 			compatible = "renesas,r8a7791-apmu", "renesas,apmu";
 			reg = <0 0xe6152000 0 0x188>;
-			cpus = <&cpu0 &cpu1>;
+			cpus = <&cpu0>, <&cpu1>;
 		};
 
 		rst: reset-controller@e6160000 {
@@ -606,7 +608,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7791",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -618,11 +620,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
@@ -728,6 +730,7 @@
 			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
 			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
 			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			#address-cells = <1>;
@@ -1220,7 +1223,7 @@
 
 		rcar_sound: sound@ec500000 {
 			/*
-			 * #sound-dai-cells is required
+			 * #sound-dai-cells is required if simple-card
 			 *
 			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
 			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
@@ -1362,7 +1365,7 @@
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi-1 {
-					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>,
 					       <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index 9368ac2cf508..c66de9dd12df 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -112,6 +112,9 @@
 	keyboard {
 		compatible = "gpio-keys";
 
+		pinctrl-0 = <&keyboard_pins>;
+		pinctrl-names = "default";
+
 		key-1 {
 			linux,code = <KEY_1>;
 			label = "SW2-1";
@@ -235,6 +238,11 @@
 		function = "du1";
 	};
 
+	keyboard_pins: keyboard {
+		pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_02";
+		bias-pull-up;
+	};
+
 	pmic_irq_pins: pmicirq {
 		groups = "intc_irq2";
 		function = "intc";
@@ -327,14 +335,14 @@
 			compatible = "dlg,da9063-rtc";
 		};
 
-		wdt {
+		watchdog {
 			compatible = "dlg,da9063-watchdog";
 		};
 	};
 };
 
 &du {
-	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-0 = <&du0_pins>, <&du1_pins>;
 	pinctrl-names = "default";
 
 	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>;
diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts
index ba2d2a589012..434e4655be9d 100644
--- a/arch/arm/boot/dts/r8a7792-wheat.dts
+++ b/arch/arm/boot/dts/r8a7792-wheat.dts
@@ -307,7 +307,7 @@
 };
 
 &du {
-	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-0 = <&du0_pins>, <&du1_pins>;
 	pinctrl-names = "default";
 
 	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&osc2_clk>;
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index f5b299bfcb23..a6d9367f8fa0 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -45,7 +45,6 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -54,6 +53,7 @@
 			clock-frequency = <1000000000>;
 			clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
 			power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA15>;
 		};
 
@@ -64,6 +64,7 @@
 			clock-frequency = <1000000000>;
 			clocks = <&cpg CPG_CORE R8A7792_CLK_Z>;
 			power-domains = <&sysc R8A7792_PD_CA15_CPU1>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA15>;
 		};
 
@@ -110,6 +111,7 @@
 			compatible = "renesas,r8a7792-wdt",
 				     "renesas,rcar-gen2-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
 			resets = <&cpg 402>;
@@ -314,7 +316,7 @@
 		apmu@e6152000 {
 			compatible = "renesas,r8a7792-apmu", "renesas,apmu";
 			reg = <0 0xe6152000 0 0x188>;
-			cpus = <&cpu0 &cpu1>;
+			cpus = <&cpu0>, <&cpu1>;
 		};
 
 		rst: reset-controller@e6160000 {
@@ -537,6 +539,7 @@
 			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
 			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
 			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index abf487e8fe0f..79b537b24642 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -49,6 +49,9 @@
 		i2c10 = &gpioi2c4;
 		i2c11 = &i2chdmi;
 		i2c12 = &i2cexio4;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi1;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
@@ -61,9 +64,12 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
-	gpio-keys {
+	keyboard {
 		compatible = "gpio-keys";
 
+		pinctrl-0 = <&keyboard_pins>;
+		pinctrl-names = "default";
+
 		key-1 {
 			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_1>;
@@ -564,6 +570,11 @@
 		function = "audio_clk";
 	};
 
+	keyboard_pins: keyboard {
+		pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
+		bias-pull-up;
+	};
+
 	vin0_pins: vin0 {
 		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 		function = "vin0";
@@ -576,7 +587,7 @@
 };
 
 &ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
 	pinctrl-names = "default";
 
 	phy-handle = <&phy1>;
@@ -584,6 +595,8 @@
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
@@ -727,7 +740,7 @@
 			compatible = "dlg,da9063-rtc";
 		};
 
-		wdt {
+		watchdog {
 			compatible = "dlg,da9063-watchdog";
 		};
 	};
@@ -751,7 +764,7 @@
 };
 
 &rcar_sound {
-	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
 	pinctrl-names = "default";
 
 	/* Single DAI */
@@ -761,8 +774,8 @@
 
 	rcar_sound,dai {
 		dai0 {
-			playback = <&ssi0 &src2 &dvc0>;
-			capture  = <&ssi1 &src3 &dvc1>;
+			playback = <&ssi0>, <&src2>, <&dvc0>;
+			capture  = <&ssi1>, <&src3>, <&dvc1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index f930f69f7bcc..f51bf687f4bd 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -60,7 +60,6 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -69,6 +68,7 @@
 			clock-frequency = <1500000000>;
 			clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
 			power-domains = <&sysc R8A7793_PD_CA15_CPU0>;
+			enable-method = "renesas,apmu";
 			voltage-tolerance = <1>; /* 1% */
 			clock-latency = <300000>; /* 300 us */
 
@@ -89,6 +89,7 @@
 			clock-frequency = <1500000000>;
 			clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
 			power-domains = <&sysc R8A7793_PD_CA15_CPU1>;
+			enable-method = "renesas,apmu";
 			voltage-tolerance = <1>; /* 1% */
 			clock-latency = <300000>; /* 300 us */
 
@@ -145,6 +146,7 @@
 			compatible = "renesas,r8a7793-wdt",
 				     "renesas,rcar-gen2-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
 			resets = <&cpg 402>;
@@ -290,7 +292,7 @@
 		apmu@e6152000 {
 			compatible = "renesas,r8a7793-apmu", "renesas,apmu";
 			reg = <0 0xe6152000 0 0x188>;
-			cpus = <&cpu0 &cpu1>;
+			cpus = <&cpu0>, <&cpu1>;
 		};
 
 		rst: reset-controller@e6160000 {
@@ -986,7 +988,7 @@
 
 		rcar_sound: sound@ec500000 {
 			/*
-			 * #sound-dai-cells is required
+			 * #sound-dai-cells is required if simple-card
 			 *
 			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
 			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
@@ -1109,7 +1111,7 @@
 					dma-names = "rx", "tx", "rxu", "txu";
 				};
 				ssi1: ssi-1 {
-					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&audma0 0x03>, <&audma1 0x04>,
 					       <&audma0 0x49>, <&audma1 0x4a>;
 					dma-names = "rx", "tx", "rxu", "txu";
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 3f1cc5bbf329..4d93319674c6 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 #include "r8a7794.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Alt";
@@ -19,6 +20,9 @@
 		i2c10 = &gpioi2c4;
 		i2c11 = &i2chdmi;
 		i2c12 = &i2cexio4;
+		mmc0 = &mmcif0;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi1;
 	};
 
 	chosen {
@@ -91,6 +95,42 @@
 		#size-cells = <1>;
 	};
 
+	keyboard {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keyboard_pins>;
+		pinctrl-names = "default";
+
+		one {
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+		};
+		two {
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+		};
+		three {
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+		};
+		four {
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	vga-encoder {
 		compatible = "adi,adv7123";
 
@@ -316,6 +356,11 @@
 		groups = "usb1";
 		function = "usb1";
 	};
+
+	keyboard_pins: keyboard {
+		pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12";
+		bias-pull-up;
+	};
 };
 
 &cmt0 {
@@ -330,7 +375,7 @@
 };
 
 &ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
 	pinctrl-names = "default";
 
 	phy-handle = <&phy1>;
@@ -338,6 +383,8 @@
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
@@ -416,7 +463,7 @@
 			compatible = "dlg,da9063-rtc";
 		};
 
-		wdt {
+		watchdog {
 			compatible = "dlg,da9063-watchdog";
 		};
 	};
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 677596f6c9c9..b7af1befa126 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -31,6 +31,8 @@
 		serial0 = &scif2;
 		i2c9 = &gpioi2c1;
 		i2c10 = &i2chdmi;
+		mmc0 = &mmcif0;
+		mmc1 = &sdhi1;
 	};
 
 	chosen {
@@ -43,9 +45,12 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
-	gpio-keys {
+	keyboard {
 		compatible = "gpio-keys";
 
+		pinctrl-0 = <&keyboard_pins>;
+		pinctrl-names = "default";
+
 		key-3 {
 			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_3>;
@@ -356,6 +361,11 @@
 		function = "du1";
 	};
 
+	keyboard_pins: keyboard {
+		pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12";
+		bias-pull-up;
+	};
+
 	ssi_pins: sound {
 		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 		function = "ssi";
@@ -379,7 +389,7 @@
 };
 
 &ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
 	pinctrl-names = "default";
 
 	phy-handle = <&phy1>;
@@ -387,6 +397,8 @@
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
@@ -421,7 +433,7 @@
 			compatible = "dlg,da9063-rtc";
 		};
 
-		wdt {
+		watchdog {
 			compatible = "dlg,da9063-watchdog";
 		};
 	};
@@ -518,7 +530,7 @@
 };
 
 &du {
-	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-0 = <&du0_pins>, <&du1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 
@@ -541,7 +553,7 @@
 };
 
 &rcar_sound {
-	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index cd5e2904068a..371dd4715dde 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -62,7 +62,6 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -71,6 +70,7 @@
 			clock-frequency = <1000000000>;
 			clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>;
 			power-domains = <&sysc R8A7794_PD_CA7_CPU0>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA7>;
 		};
 
@@ -81,6 +81,7 @@
 			clock-frequency = <1000000000>;
 			clocks = <&cpg CPG_CORE R8A7794_CLK_Z2>;
 			power-domains = <&sysc R8A7794_PD_CA7_CPU1>;
+			enable-method = "renesas,apmu";
 			next-level-cache = <&L2_CA7>;
 		};
 
@@ -127,6 +128,7 @@
 			compatible = "renesas,r8a7794-wdt",
 				     "renesas,rcar-gen2-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 402>;
 			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 			resets = <&cpg 402>;
@@ -256,7 +258,7 @@
 		apmu@e6151000 {
 			compatible = "renesas,r8a7794-apmu", "renesas,apmu";
 			reg = <0 0xe6151000 0 0x188>;
-			cpus = <&cpu0 &cpu1>;
+			cpus = <&cpu0>, <&cpu1>;
 		};
 
 		rst: reset-controller@e6160000 {
@@ -504,7 +506,7 @@
 			status = "disabled";
 		};
 
-		usbphy: usb-phy@e6590100 {
+		usbphy: usb-phy-controller@e6590100 {
 			compatible = "renesas,usb-phy-r8a7794",
 				     "renesas,rcar-gen2-usb-phy";
 			reg = <0 0xe6590100 0 0x100>;
@@ -516,11 +518,11 @@
 			resets = <&cpg 704>;
 			status = "disabled";
 
-			usb0: usb-channel@0 {
+			usb0: usb-phy@0 {
 				reg = <0>;
 				#phy-cells = <1>;
 			};
-			usb2: usb-channel@2 {
+			usb2: usb-phy@2 {
 				reg = <2>;
 				#phy-cells = <1>;
 			};
@@ -598,6 +600,7 @@
 			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
 			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
 			power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			#address-cells = <1>;
@@ -952,7 +955,7 @@
 
 		rcar_sound: sound@ec500000 {
 			/*
-			 * #sound-dai-cells is required
+			 * #sound-dai-cells is required if simple-card
 			 *
 			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
 			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
diff --git a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi
deleted file mode 100644
index 79fce67ebb1c..000000000000
--- a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common file for the AA104XD12 panel connected to Renesas R-Car boards
- *
- * Copyright (C) 2014 Renesas Electronics Corp.
- */
-
-/ {
-	panel {
-		compatible = "mitsubishi,aa104xd12", "panel-lvds";
-
-		width-mm = <210>;
-		height-mm = <158>;
-		data-mapping = "jeida-18";
-
-		panel-timing {
-			/* 1024x768 @65Hz */
-			clock-frequency = <65000000>;
-			hactive = <1024>;
-			vactive = <768>;
-			hsync-len = <136>;
-			hfront-porch = <20>;
-			hback-porch = <160>;
-			vfront-porch = <3>;
-			vback-porch = <29>;
-			vsync-len = <6>;
-		};
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds_connector>;
-			};
-		};
-	};
-};
-
-&lvds_connector {
-	remote-endpoint = <&panel_in>;
-};
diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
index 4e57ae2688fc..c18bbd7141c4 100644
--- a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
+++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
@@ -8,6 +8,9 @@
 
 /dts-v1/;
 
+#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+#include <dt-bindings/net/pcs-rzn1-miic.h>
+
 #include "r9a06g032.dtsi"
 
 / {
@@ -23,6 +26,155 @@
 	};
 };
 
+&can0 {
+	pinctrl-0 = <&pins_can0>;
+	pinctrl-names = "default";
+
+	/* Assuming CN10/CN11 are wired for CAN1 */
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&pins_can1>;
+	pinctrl-names = "default";
+
+	/* Please only enable can0 or can1, depending on CN10/CN11 */
+	/* status = "okay"; */
+};
+
+&eth_miic {
+	status = "okay";
+	renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "gmii";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&mii_conv4 {
+	renesas,miic-input = <MIIC_SWITCH_PORTB>;
+	status = "okay";
+};
+
+&mii_conv5 {
+	renesas,miic-input = <MIIC_SWITCH_PORTA>;
+	status = "okay";
+};
+
+&pinctrl{
+	pins_can0: pins_can0 {
+		pinmux = <RZN1_PINMUX(162, RZN1_FUNC_CAN)>,	/* CAN0_TXD */
+			 <RZN1_PINMUX(163, RZN1_FUNC_CAN)>;	/* CAN0_RXD */
+		drive-strength = <6>;
+	};
+
+	pins_can1: pins_can1 {
+		pinmux = <RZN1_PINMUX(109, RZN1_FUNC_CAN)>,	/* CAN1_TXD */
+			 <RZN1_PINMUX(110, RZN1_FUNC_CAN)>;	/* CAN1_RXD */
+		drive-strength = <6>;
+	};
+
+	pins_eth3: pins_eth3 {
+		pinmux = <RZN1_PINMUX(36, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(37, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(38, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(39, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(40, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(41, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(42, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(43, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(44, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(45, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(46, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(47, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_eth4: pins_eth4 {
+		pinmux = <RZN1_PINMUX(48, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(49, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(50, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(51, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(52, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(53, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(54, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(55, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(56, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(57, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(58, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
+			 <RZN1_PINMUX(59, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	pins_mdio1: pins_mdio1 {
+		pinmux = <RZN1_PINMUX(152, RZN1_FUNC_MDIO1_SWITCH)>,
+			 <RZN1_PINMUX(153, RZN1_FUNC_MDIO1_SWITCH)>;
+	};
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_eth3>, <&pins_eth4>, <&pins_mdio1>;
+
+	dsa,member = <0 0>;
+
+	mdio {
+		clock-frequency = <2500000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch0phy4: ethernet-phy@4 {
+			reg = <4>;
+			micrel,led-mode = <1>;
+		};
+
+		switch0phy5: ethernet-phy@5 {
+			reg = <5>;
+			micrel,led-mode = <1>;
+		};
+	};
+};
+
+&switch_port0 {
+	label = "lan0";
+	phy-mode = "mii";
+	phy-handle = <&switch0phy5>;
+	status = "okay";
+};
+
+&switch_port1 {
+	label = "lan1";
+	phy-mode = "mii";
+	phy-handle = <&switch0phy4>;
+	status = "okay";
+};
+
+&switch_port4 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
+
+&wdt0 {
+	timeout-sec = <60>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index c47896e4ab58..0fa565a1c3ad 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -66,15 +66,108 @@
 		interrupt-parent = <&gic>;
 		ranges;
 
+		rtc0: rtc@40006000 {
+			compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc";
+			reg = <0x40006000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "alarm", "timer", "pps";
+			clocks = <&sysctrl R9A06G032_HCLK_RTC>;
+			clock-names = "hclk";
+			power-domains = <&sysctrl>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@40008000 {
+			compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt";
+			reg = <0x40008000 0x1000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sysctrl R9A06G032_CLK_WATCHDOG>;
+			status = "disabled";
+		};
+
+		wdt1: watchdog@40009000 {
+			compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt";
+			reg = <0x40009000 0x1000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sysctrl R9A06G032_CLK_WATCHDOG>;
+			status = "disabled";
+		};
+
 		sysctrl: system-controller@4000c000 {
 			compatible = "renesas,r9a06g032-sysctrl";
 			reg = <0x4000c000 0x1000>;
 			status = "okay";
 			#clock-cells = <1>;
+			#power-domain-cells = <0>;
 
 			clocks = <&ext_mclk>, <&ext_rtc_clk>,
 					<&ext_jtag_clk>, <&ext_rgmii_ref>;
 			clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			dmamux: dma-router@a0 {
+				compatible = "renesas,rzn1-dmamux";
+				reg = <0xa0 4>;
+				#dma-cells = <6>;
+				dma-requests = <32>;
+				dma-masters = <&dma0 &dma1>;
+			};
+		};
+
+		udc: usb@4001e000 {
+			compatible = "renesas,r9a06g032-usbf", "renesas,rzn1-usbf";
+			reg = <0x4001e000 0x2000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_USBF>,
+				 <&sysctrl R9A06G032_HCLK_USBPM>;
+			clock-names = "hclkf", "hclkpm";
+			power-domains = <&sysctrl>;
+			status = "disabled";
+		};
+
+		pci_usb: pci@40030000 {
+			compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1";
+			device_type = "pci";
+			clocks = <&sysctrl R9A06G032_HCLK_USBH>,
+				 <&sysctrl R9A06G032_HCLK_USBPM>,
+				 <&sysctrl R9A06G032_CLK_PCI_USB>;
+			clock-names = "hclkh", "hclkpm", "pciclk";
+			power-domains = <&sysctrl>;
+			reg = <0x40030000 0xc00>,
+			      <0x40020000 0x1100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0x40020000 0x40020000 0 0x00010000>;
+			/* Should map all possible DDR as inbound ranges, but
+			 * the IP only supports a 256MB, 512MB, or 1GB window.
+			 * flags, PCI addr (64-bit), CPU addr, PCI size (64-bit)
+			 */
+			dma-ranges = <0x42000000 0 0x80000000 0x80000000 0 0x40000000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
+					 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
+					 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usbphy>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usbphy>;
+				phy-names = "usb";
+			};
 		};
 
 		uart0: serial@40060000 {
@@ -118,6 +211,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
 			clock-names = "baudclk", "apb_pclk";
+			dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -129,6 +224,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
 			clock-names = "baudclk", "apb_pclk";
+			dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -140,6 +237,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
 			clock-names = "baudclk", "apb_pclk";
+			dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -151,6 +250,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
 			clock-names = "baudclk", "apb_pclk";
+			dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -162,6 +263,8 @@
 			reg-io-width = <4>;
 			clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
 			clock-names = "baudclk", "apb_pclk";
+			dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -173,6 +276,154 @@
 			status = "okay";
 		};
 
+		nand_controller: nand-controller@40102000 {
+			compatible = "renesas,r9a06g032-nandc", "renesas,rzn1-nandc";
+			reg = <0x40102000 0x2000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>;
+			clock-names = "hclk", "eclk";
+			power-domains = <&sysctrl>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dma0: dma-controller@40104000 {
+			compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma";
+			reg = <0x40104000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "hclk";
+			clocks = <&sysctrl R9A06G032_HCLK_DMA0>;
+			dma-channels = <8>;
+			dma-requests = <16>;
+			dma-masters = <1>;
+			#dma-cells = <3>;
+			block_size = <0xfff>;
+			data-width = <8>;
+		};
+
+		dma1: dma-controller@40105000 {
+			compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma";
+			reg = <0x40105000 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "hclk";
+			clocks = <&sysctrl R9A06G032_HCLK_DMA1>;
+			dma-channels = <8>;
+			dma-requests = <16>;
+			dma-masters = <1>;
+			#dma-cells = <3>;
+			block_size = <0xfff>;
+			data-width = <8>;
+		};
+
+		gmac2: ethernet@44002000 {
+			compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
+			reg = <0x44002000 0x2000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+			clocks = <&sysctrl R9A06G032_HCLK_GMAC1>;
+			clock-names = "stmmaceth";
+			power-domains = <&sysctrl>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <2048>;
+			rx-fifo-depth = <4096>;
+			status = "disabled";
+		};
+
+		eth_miic: eth-miic@44030000 {
+			compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x44030000 0x10000>;
+			clocks = <&sysctrl R9A06G032_CLK_MII_REF>,
+				 <&sysctrl R9A06G032_CLK_RGMII_REF>,
+				 <&sysctrl R9A06G032_CLK_RMII_REF>,
+				 <&sysctrl R9A06G032_HCLK_SWITCH_RG>;
+			clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk";
+			power-domains = <&sysctrl>;
+			status = "disabled";
+
+			mii_conv1: mii-conv@1 {
+				reg = <1>;
+				status = "disabled";
+			};
+
+			mii_conv2: mii-conv@2 {
+				reg = <2>;
+				status = "disabled";
+			};
+
+			mii_conv3: mii-conv@3 {
+				reg = <3>;
+				status = "disabled";
+			};
+
+			mii_conv4: mii-conv@4 {
+				reg = <4>;
+				status = "disabled";
+			};
+
+			mii_conv5: mii-conv@5 {
+				reg = <5>;
+				status = "disabled";
+			};
+		};
+
+		switch: switch@44050000 {
+			compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw";
+			reg = <0x44050000 0x10000>;
+			clocks = <&sysctrl R9A06G032_HCLK_SWITCH>,
+				 <&sysctrl R9A06G032_CLK_SWITCH>;
+			clock-names = "hclk", "clk";
+			power-domains = <&sysctrl>;
+			status = "disabled";
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch_port0: port@0 {
+					reg = <0>;
+					pcs-handle = <&mii_conv5>;
+					status = "disabled";
+				};
+
+				switch_port1: port@1 {
+					reg = <1>;
+					pcs-handle = <&mii_conv4>;
+					status = "disabled";
+				};
+
+				switch_port2: port@2 {
+					reg = <2>;
+					pcs-handle = <&mii_conv3>;
+					status = "disabled";
+				};
+
+				switch_port3: port@3 {
+					reg = <3>;
+					pcs-handle = <&mii_conv2>;
+					status = "disabled";
+				};
+
+				switch_port4: port@4 {
+					reg = <4>;
+					ethernet = <&gmac2>;
+					label = "cpu";
+					phy-mode = "internal";
+					status = "disabled";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+
 		gic: interrupt-controller@44101000 {
 			compatible = "arm,gic-400", "arm,cortex-a7-gic";
 			interrupt-controller;
@@ -184,11 +435,30 @@
 			interrupts =
 				<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
+
+		can0: can@52104000 {
+			compatible = "renesas,r9a06g032-sja1000","renesas,rzn1-sja1000";
+			reg = <0x52104000 0x800>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_CAN0>;
+			power-domains = <&sysctrl>;
+			status = "disabled";
+		};
+
+		can1: can@52105000 {
+			compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
+			reg = <0x52105000 0x800>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_CAN1>;
+			power-domains = <&sysctrl>;
+			status = "disabled";
+		};
 	};
 
 	timer {
-		compatible = "arm,cortex-a7-timer",
-			     "arm,armv7-timer";
+		compatible = "arm,armv7-timer";
 		interrupt-parent = <&gic>;
 		arm,cpu-registers-not-fw-configured;
 		always-on;
@@ -198,4 +468,10 @@
 			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
+
+	usbphy: usb-phy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index 2a7e6624efb9..becdc0b664bf 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -15,27 +15,30 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
 	phy = <&phy0>;
-	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
 	phy-reset-duration = <10>; /* millisecond */
-
+	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
 	status = "okay";
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
 	};
 };
 
 &i2c1 {
 	status = "okay";
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 };
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 7154b827ea2f..67e1e04139e7 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -80,16 +80,20 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
 	phy = <&phy0>;
-	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
 	phy-reset-duration = <10>; /* millisecond */
-
+	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
 	status = "okay";
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
 	};
 };
 
@@ -390,7 +394,7 @@
 		};
 	};
 
-	sleep {
+	suspend {
 		global_pwroff: global-pwroff {
 			rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>;
 		};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 47a787a12e55..78686fc72ce6 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/clock/rk3036-cru.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/power/rk3036-power.h>
 
 / {
 	#address-cells = <1>;
@@ -111,10 +112,32 @@
 		assigned-clock-rates = <100000000>;
 		clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>;
 		clock-names = "bus", "core";
+		power-domains = <&power RK3036_PD_GPU>;
 		resets = <&cru SRST_GPU>;
 		status = "disabled";
 	};
 
+	vpu: video-codec@10108000 {
+		compatible = "rockchip,rk3036-vpu";
+		reg = <0x10108000 0x800>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vdpu";
+		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+		clock-names = "aclk", "hclk";
+		iommus = <&vpu_mmu>;
+		power-domains = <&power RK3036_PD_VPU>;
+	};
+
+	vpu_mmu: iommu@10108800 {
+		compatible = "rockchip,iommu";
+		reg = <0x10108800 0x100>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3036_PD_VPU>;
+		#iommu-cells = <0>;
+	};
+
 	vop: vop@10118000 {
 		compatible = "rockchip,rk3036-vop";
 		reg = <0x10118000 0x19c>;
@@ -124,6 +147,7 @@
 		resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>;
 		reset-names = "axi", "ahb", "dclk";
 		iommus = <&vop_mmu>;
+		power-domains = <&power RK3036_PD_VIO>;
 		status = "disabled";
 
 		vop_out: port {
@@ -140,13 +164,28 @@
 		compatible = "rockchip,iommu";
 		reg = <0x10118300 0x100>;
 		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vop_mmu";
 		clocks = <&cru ACLK_LCDC>, <&cru HCLK_LCDC>;
 		clock-names = "aclk", "iface";
+		power-domains = <&power RK3036_PD_VIO>;
 		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
+	qos_gpu: qos@1012d000 {
+		compatible = "rockchip,rk3036-qos", "syscon";
+		reg = <0x1012d000 0x20>;
+	};
+
+	qos_vpu: qos@1012e000 {
+		compatible = "rockchip,rk3036-qos", "syscon";
+		reg = <0x1012e000 0x20>;
+	};
+
+	qos_vio: qos@1012f000 {
+		compatible = "rockchip,rk3036-qos", "syscon";
+		reg = <0x1012f000 0x20>;
+	};
+
 	gic: interrupt-controller@10139000 {
 		compatible = "arm,gic-400";
 		interrupt-controller;
@@ -186,11 +225,9 @@
 	};
 
 	emac: ethernet@10200000 {
-		compatible = "rockchip,rk3036-emac", "snps,arc-emac";
+		compatible = "rockchip,rk3036-emac";
 		reg = <0x10200000 0x4000>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		rockchip,grf = <&grf>;
 		clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
 		clock-names = "hclk", "macref", "macclk";
@@ -291,6 +328,8 @@
 	cru: clock-controller@20000000 {
 		compatible = "rockchip,rk3036-cru";
 		reg = <0x20000000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -302,6 +341,37 @@
 		compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
 		reg = <0x20008000 0x1000>;
 
+		power: power-controller {
+			compatible = "rockchip,rk3036-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-domain@RK3036_PD_VIO {
+				reg = <RK3036_PD_VIO>;
+				clocks = <&cru ACLK_LCDC>,
+					 <&cru HCLK_LCDC>,
+					 <&cru SCLK_LCDC>;
+				pm_qos = <&qos_vio>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3036_PD_VPU {
+				reg = <RK3036_PD_VPU>;
+				clocks = <&cru ACLK_VCODEC>,
+					 <&cru HCLK_VCODEC>;
+				pm_qos = <&qos_vpu>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3036_PD_GPU {
+				reg = <RK3036_PD_GPU>;
+				clocks = <&cru SCLK_GPU>;
+				pm_qos = <&qos_gpu>;
+				#power-domain-cells = <0>;
+			};
+		};
+
 		reboot-mode {
 			compatible = "syscon-reboot-mode";
 			offset = <0x1d8>;
@@ -346,8 +416,8 @@
 		compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
 		reg = <0x20044000 0x20>;
 		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&xin24m>, <&cru PCLK_TIMER>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
 	};
 
 	pwm0: pwm@20050000 {
@@ -355,7 +425,6 @@
 		reg = <0x20050000 0x10>;
 		#pwm-cells = <3>;
 		clocks = <&cru PCLK_PWM>;
-		clock-names = "pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm0_pin>;
 		status = "disabled";
@@ -366,7 +435,6 @@
 		reg = <0x20050010 0x10>;
 		#pwm-cells = <3>;
 		clocks = <&cru PCLK_PWM>;
-		clock-names = "pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm1_pin>;
 		status = "disabled";
@@ -377,7 +445,6 @@
 		reg = <0x20050020 0x10>;
 		#pwm-cells = <3>;
 		clocks = <&cru PCLK_PWM>;
-		clock-names = "pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm2_pin>;
 		status = "disabled";
@@ -388,7 +455,6 @@
 		reg = <0x20050030 0x10>;
 		#pwm-cells = <2>;
 		clocks = <&cru PCLK_PWM>;
-		clock-names = "pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm3_pin>;
 		status = "disabled";
@@ -490,7 +556,7 @@
 		status = "disabled";
 	};
 
-	pdma: pdma@20078000 {
+	pdma: dma-controller@20078000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x20078000 0x4000>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
@@ -509,7 +575,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		gpio0: gpio0@2007c000 {
+		gpio0: gpio@2007c000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x2007c000 0x100>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
@@ -522,7 +588,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio1: gpio1@20080000 {
+		gpio1: gpio@20080000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x20080000 0x100>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -535,7 +601,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio2: gpio2@20084000 {
+		gpio2: gpio@20084000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x20084000 0x100>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -548,7 +614,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		pcfg_pull_default: pcfg_pull_default {
+		pcfg_pull_default: pcfg-pull-default {
 			bias-pull-pin-default;
 		};
 
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index eba7a1344976..962b4d1291db 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -12,6 +12,11 @@
 	model = "bq Curie 2";
 	compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
 
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
@@ -43,7 +48,7 @@
 		compatible = "gpio-keys";
 		autorepeat;
 
-		power {
+		key-power {
 			gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
@@ -51,7 +56,7 @@
 			wakeup-source;
 			debounce-interval = <100>;
 		};
-		volume-down {
+		key-volume-down {
 			gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
 			linux,code = <KEY_VOLUMEDOWN>;
 			label = "GPIO Key Vol-";
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
index 6b121658d93c..8beecd628282 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -10,6 +10,10 @@
 	model = "MarsBoard RK3066";
 	compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
 
+	aliases {
+		mmc0 = &mmc0;
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
@@ -146,18 +150,21 @@
 #include "tps65910.dtsi"
 
 &emac {
-	status = "okay";
-
 	phy = <&phy0>;
 	phy-supply = <&vcc_rmii>;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+	status = "okay";
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
index eed9e60cffa2..06790f05b395 100644
--- a/arch/arm/boot/dts/rk3066a-mk808.dts
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -4,12 +4,18 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include "rk3066a.dtsi"
 
 / {
 	model = "Rikomagic MK808";
 	compatible = "rikomagic,mk808", "rockchip,rk3066a";
 
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -19,6 +25,20 @@
 		device_type = "memory";
 	};
 
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <2500000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 
@@ -41,6 +61,13 @@
 		};
 	};
 
+	vcc_2v5: vcc-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_2v5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
 	vcc_io: vcc-io {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_io";
@@ -130,7 +157,32 @@
 	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
 	pinctrl-names = "default";
 	vmmc-supply = <&vcc_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&nfc {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "rk-nand";
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-step-size = <1024>;
+		nand-ecc-strength = <40>;
+		nand-is-boot-medium;
+		rockchip,boot-blks = <8>;
+		rockchip,boot-ecc-strength = <24>;
+	};
 };
 
 &pinctrl {
@@ -159,6 +211,11 @@
 	};
 };
 
+&saradc {
+	vref-supply = <&vcc_2v5>;
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 309518403d86..3eee42137b6d 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -11,6 +11,12 @@
 	model = "Rayeager PX2";
 	compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
 
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &emmc;
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
@@ -26,7 +32,7 @@
 	keys: gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			wakeup-source;
 			gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
@@ -58,7 +64,7 @@
 	};
 
 	/* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */
-	vcc_stdby: 5v-stdby-regulator {
+	vcc_stdby: stdby-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "5v_stdby";
 		regulator-min-microvolt = <5000000>;
@@ -136,15 +142,20 @@
 };
 
 &emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
 	phy = <&phy0>;
 	phy-supply = <&vcc_rmii>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
 	status = "okay";
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 252750c97f97..de9915d946f7 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -23,16 +23,15 @@
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
 			reg = <0x0>;
-			operating-points = <
+			operating-points =
 				/* kHz    uV */
-				1416000 1300000
-				1200000 1175000
-				1008000 1125000
-				816000  1125000
-				600000  1100000
-				504000  1100000
-				312000  1075000
-			>;
+				<1416000 1300000>,
+				<1200000 1175000>,
+				<1008000 1125000>,
+				<816000  1125000>,
+				<600000  1100000>,
+				<504000  1100000>,
+				<312000  1075000>;
 			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 		};
@@ -203,8 +202,9 @@
 	cru: clock-controller@20000000 {
 		compatible = "rockchip,rk3066a-cru";
 		reg = <0x20000000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
-
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>,
@@ -217,8 +217,8 @@
 				       <150000000>, <75000000>;
 	};
 
-	timer@2000e000 {
-		compatible = "snps,dw-apb-timer-osc";
+	timer2: timer@2000e000 {
+		compatible = "snps,dw-apb-timer";
 		reg = <0x2000e000 0x100>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>;
@@ -238,16 +238,16 @@
 		};
 	};
 
-	timer@20038000 {
-		compatible = "snps,dw-apb-timer-osc";
+	timer0: timer@20038000 {
+		compatible = "snps,dw-apb-timer";
 		reg = <0x20038000 0x100>;
 		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>;
 		clock-names = "timer", "pclk";
 	};
 
-	timer@2003a000 {
-		compatible = "snps,dw-apb-timer-osc";
+	timer1: timer@2003a000 {
+		compatible = "snps,dw-apb-timer";
 		reg = <0x2003a000 0x100>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>;
@@ -266,30 +266,6 @@
 		status = "disabled";
 	};
 
-	usbphy: phy {
-		compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy";
-		rockchip,grf = <&grf>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-
-		usbphy0: usb-phy@17c {
-			#phy-cells = <0>;
-			reg = <0x17c>;
-			clocks = <&cru SCLK_OTGPHY0>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-		};
-
-		usbphy1: usb-phy@188 {
-			#phy-cells = <0>;
-			reg = <0x188>;
-			clocks = <&cru SCLK_OTGPHY1>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-		};
-	};
-
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3066a-pinctrl";
 		rockchip,grf = <&grf>;
@@ -297,7 +273,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		gpio0: gpio0@20034000 {
+		gpio0: gpio@20034000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x20034000 0x100>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -310,7 +286,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio1: gpio1@2003c000 {
+		gpio1: gpio@2003c000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x2003c000 0x100>;
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -323,7 +299,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio2: gpio2@2003e000 {
+		gpio2: gpio@2003e000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x2003e000 0x100>;
 			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -336,7 +312,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio3: gpio3@20080000 {
+		gpio3: gpio@20080000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x20080000 0x100>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -349,7 +325,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio4: gpio4@20084000 {
+		gpio4: gpio@20084000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x20084000 0x100>;
 			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -362,7 +338,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio6: gpio6@2000a000 {
+		gpio6: gpio@2000a000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x2000a000 0x100>;
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
@@ -375,11 +351,11 @@
 			#interrupt-cells = <2>;
 		};
 
-		pcfg_pull_default: pcfg_pull_default {
+		pcfg_pull_default: pcfg-pull-default {
 			bias-pull-pin-default;
 		};
 
-		pcfg_pull_none: pcfg_pull_none {
+		pcfg_pull_none: pcfg-pull-none {
 			bias-disable;
 		};
 
@@ -702,6 +678,33 @@
 	power-domains = <&power RK3066_PD_GPU>;
 };
 
+&grf {
+	compatible = "rockchip,rk3066-grf", "syscon", "simple-mfd";
+
+	usbphy: usbphy {
+		compatible = "rockchip,rk3066a-usb-phy";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		usbphy0: usb-phy@17c {
+			reg = <0x17c>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+		};
+
+		usbphy1: usb-phy@188 {
+			reg = <0x188>;
+			clocks = <&cru SCLK_OTGPHY1>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+		};
+	};
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_xfer>;
@@ -755,7 +758,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pd_vio@RK3066_PD_VIO {
+		power-domain@RK3066_PD_VIO {
 			reg = <RK3066_PD_VIO>;
 			clocks = <&cru ACLK_LCDC0>,
 				 <&cru ACLK_LCDC1>,
@@ -780,21 +783,24 @@
 				 <&qos_cif1>,
 				 <&qos_ipp>,
 				 <&qos_rga>;
+			#power-domain-cells = <0>;
 		};
 
-		pd_video@RK3066_PD_VIDEO {
+		power-domain@RK3066_PD_VIDEO {
 			reg = <RK3066_PD_VIDEO>;
 			clocks = <&cru ACLK_VDPU>,
 				 <&cru ACLK_VEPU>,
 				 <&cru HCLK_VDPU>,
 				 <&cru HCLK_VEPU>;
 			pm_qos = <&qos_vpu>;
+			#power-domain-cells = <0>;
 		};
 
-		pd_gpu@RK3066_PD_GPU {
+		power-domain@RK3066_PD_GPU {
 			reg = <RK3066_PD_GPU>;
 			clocks = <&cru ACLK_GPU>;
 			pm_qos = <&qos_gpu>;
+			#power-domain-cells = <0>;
 		};
 	};
 };
@@ -861,6 +867,10 @@
 	pinctrl-0 = <&uart3_xfer>;
 };
 
+&vpu {
+	power-domains = <&power RK3066_PD_VIDEO>;
+};
+
 &wdt {
 	compatible = "rockchip,rk3066-wdt", "snps,dw-wdt";
 };
diff --git a/arch/arm/boot/dts/rk3128-evb.dts b/arch/arm/boot/dts/rk3128-evb.dts
new file mode 100644
index 000000000000..c38f42497cbd
--- /dev/null
+++ b/arch/arm/boot/dts/rk3128-evb.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+
+#include "rk3128.dtsi"
+
+/ {
+	model = "Rockchip RK3128 Evaluation board";
+	compatible = "rockchip,rk3128-evb", "rockchip,rk3128";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		i2c1 = &i2c1;
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc5v0_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&usb2phy {
+	status = "okay";
+};
+
+&usb2phy_host {
+	status = "okay";
+};
+
+&usb2phy_otg {
+	status = "okay";
+};
+
+&usb_host_ehci {
+	status = "okay";
+};
+
+&usb_host_ohci {
+	status = "okay";
+};
+
+&usb_otg {
+	vbus-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb-host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3128.dtsi b/arch/arm/boot/dts/rk3128.dtsi
new file mode 100644
index 000000000000..b63bd4ad3143
--- /dev/null
+++ b/arch/arm/boot/dts/rk3128.dtsi
@@ -0,0 +1,916 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/clock/rk3128-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+/ {
+	compatible = "rockchip,rk3128";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+			operating-points = <
+				/* KHz    uV */
+				 816000 1000000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+		};
+
+		cpu2: cpu@f02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+		};
+
+		cpu3: cpu@f03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		arm,cpu-registers-not-fw-configured;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	pmu: syscon@100a0000 {
+		compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd";
+		reg = <0x100a0000 0x1000>;
+	};
+
+	gic: interrupt-controller@10139000 {
+		compatible = "arm,cortex-a7-gic";
+		reg = <0x10139000 0x1000>,
+		      <0x1013a000 0x1000>,
+		      <0x1013c000 0x2000>,
+		      <0x1013e000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+	};
+
+	usb_otg: usb@10180000 {
+		compatible = "rockchip,rk3128-usb", "rockchip,rk3066-usb", "snps,dwc2";
+		reg = <0x10180000 0x40000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		phys = <&usb2phy_otg>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usb_host_ehci: usb@101c0000 {
+		compatible = "generic-ehci";
+		reg = <0x101c0000 0x20000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&usb2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host_ohci: usb@101e0000 {
+		compatible = "generic-ohci";
+		reg = <0x101e0000 0x20000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&usb2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	sdmmc: mmc@10214000 {
+		compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10214000 0x4000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		dmas = <&pdma 10>;
+		dma-names = "rx-tx";
+		fifo-depth = <256>;
+		max-frequency = <150000000>;
+		resets = <&cru SRST_SDMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdio: mmc@10218000 {
+		compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10218000 0x4000>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		dmas = <&pdma 11>;
+		dma-names = "rx-tx";
+		fifo-depth = <256>;
+		max-frequency = <150000000>;
+		resets = <&cru SRST_SDIO>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	emmc: mmc@1021c000 {
+		compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x1021c000 0x4000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		dmas = <&pdma 12>;
+		dma-names = "rx-tx";
+		fifo-depth = <256>;
+		max-frequency = <150000000>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	nfc: nand-controller@10500000 {
+		compatible = "rockchip,rk3128-nfc", "rockchip,rk2928-nfc";
+		reg = <0x10500000 0x4000>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+		clock-names = "ahb", "nfc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_cs0
+			     &flash_dqs &flash_rdn &flash_rdy &flash_wrn>;
+		status = "disabled";
+	};
+
+	cru: clock-controller@20000000 {
+		compatible = "rockchip,rk3128-cru";
+		reg = <0x20000000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>;
+		assigned-clock-rates = <594000000>;
+	};
+
+	grf: syscon@20008000 {
+		compatible = "rockchip,rk3128-grf", "syscon", "simple-mfd";
+		reg = <0x20008000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		usb2phy: usb2phy@17c {
+			compatible = "rockchip,rk3128-usb2phy";
+			reg = <0x017c 0x0c>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy";
+			#clock-cells = <0>;
+			status = "disabled";
+
+			usb2phy_host: host-port {
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			usb2phy_otg: otg-port {
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer0: timer@20044000 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x20044000 0x20>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
+	};
+
+	timer1: timer@20044020 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x20044020 0x20>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
+	};
+
+	timer2: timer@20044040 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x20044040 0x20>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
+	};
+
+	timer3: timer@20044060 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x20044060 0x20>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
+	};
+
+	timer4: timer@20044080 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x20044080 0x20>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
+	};
+
+	timer5: timer@200440a0 {
+		compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer";
+		reg = <0x200440a0 0x20>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
+	};
+
+	watchdog: watchdog@2004c000 {
+		compatible = "rockchip,rk3128-wdt", "snps,dw-wdt";
+		reg = <0x2004c000 0x100>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_WDT>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@20050000 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050000 0x10>;
+		clocks = <&cru PCLK_PWM>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@20050010 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050010 0x10>;
+		clocks = <&cru PCLK_PWM>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@20050020 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050020 0x10>;
+		clocks = <&cru PCLK_PWM>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@20050030 {
+		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
+		reg = <0x20050030 0x10>;
+		clocks = <&cru PCLK_PWM>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@20056000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <0x20056000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@2005a000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <0x2005a000 0x1000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@2005e000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <0x2005e000 0x1000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart0: serial@20060000 {
+		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+		reg = <0x20060000 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&pdma 2>, <&pdma 3>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart1: serial@20064000 {
+		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+		reg = <0x20064000 0x100>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&pdma 4>, <&pdma 5>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart2: serial@20068000 {
+		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
+		reg = <0x20068000 0x100>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&pdma 6>, <&pdma 7>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	saradc: saradc@2006c000 {
+		compatible = "rockchip,saradc";
+		reg = <0x2006c000 0x100>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
+		#io-channel-cells = <1>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@20072000 {
+		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
+		reg = <20072000 0x1000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi0: spi@20074000 {
+		compatible = "rockchip,rk3128-spi", "rockchip,rk3066-spi";
+		reg = <0x20074000 0x1000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&pdma 8>, <&pdma 9>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_tx &spi0_rx &spi0_clk &spi0_cs0 &spi0_cs1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	pdma: dma-controller@20078000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x20078000 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		arm,pl330-broken-no-flushp;
+		clocks = <&cru ACLK_DMAC>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3128-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio@2007c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2007c000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@20080000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@20084000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20084000 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@20088000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20088000 0x100>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_default: pcfg-pull-default {
+			bias-pull-pin-default;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 RK_PA7 2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <1 RK_PC6 2 &pcfg_pull_default>;
+			};
+
+			emmc_cmd1: emmc-cmd1 {
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_default>;
+			};
+
+			emmc_pwr: emmc-pwr {
+				rockchip,pins = <2 RK_PA5 2 &pcfg_pull_default>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>,
+						<1 RK_PD1 2 &pcfg_pull_default>,
+						<1 RK_PD2 2 &pcfg_pull_default>,
+						<1 RK_PD3 2 &pcfg_pull_default>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>,
+						<1 RK_PD1 2 &pcfg_pull_default>,
+						<1 RK_PD2 2 &pcfg_pull_default>,
+						<1 RK_PD3 2 &pcfg_pull_default>,
+						<1 RK_PD4 2 &pcfg_pull_default>,
+						<1 RK_PD5 2 &pcfg_pull_default>,
+						<1 RK_PD6 2 &pcfg_pull_default>,
+						<1 RK_PD7 2 &pcfg_pull_default>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins = <2 RK_PB0 3 &pcfg_pull_default>,
+						<2 RK_PB1 3 &pcfg_pull_default>,
+						<2 RK_PB3 3 &pcfg_pull_default>,
+						<2 RK_PB4 3 &pcfg_pull_default>,
+						<2 RK_PB5 3 &pcfg_pull_default>,
+						<2 RK_PB6 3 &pcfg_pull_default>,
+						<2 RK_PC0 3 &pcfg_pull_default>,
+						<2 RK_PC1 3 &pcfg_pull_default>,
+						<2 RK_PC2 3 &pcfg_pull_default>,
+						<2 RK_PC3 3 &pcfg_pull_default>,
+						<2 RK_PD1 3 &pcfg_pull_default>,
+						<2 RK_PC4 4 &pcfg_pull_default>,
+						<2 RK_PC5 4 &pcfg_pull_default>,
+						<2 RK_PC6 4 &pcfg_pull_default>,
+						<2 RK_PC7 4 &pcfg_pull_default>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins = <2 RK_PB0 3 &pcfg_pull_default>,
+						<2 RK_PB4 3 &pcfg_pull_default>,
+						<2 RK_PB5 3 &pcfg_pull_default>,
+						<2 RK_PB6 3 &pcfg_pull_default>,
+						<2 RK_PB7 3 &pcfg_pull_default>,
+						<2 RK_PC0 3 &pcfg_pull_default>,
+						<2 RK_PC1 3 &pcfg_pull_default>,
+						<2 RK_PC2 3 &pcfg_pull_default>,
+						<2 RK_PC3 3 &pcfg_pull_default>,
+						<2 RK_PD1 3 &pcfg_pull_default>;
+			};
+		};
+
+		hdmi {
+			hdmii2c_xfer: hdmii2c-xfer {
+				rockchip,pins = <0 RK_PA6 2 &pcfg_pull_none>,
+						<0 RK_PA7 2 &pcfg_pull_none>;
+			};
+
+			hdmi_hpd: hdmi-hpd {
+				rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			hdmi_cec: hdmi-cec {
+				rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>,
+						<0 RK_PA1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>,
+						<0 RK_PA3 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <2 RK_PC4 3 &pcfg_pull_none>,
+						<2 RK_PC5 3 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>,
+						<0 RK_PA7 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s {
+			i2s_bus: i2s-bus {
+				rockchip,pins = <0 RK_PB0 1 &pcfg_pull_none>,
+						<0 RK_PB1 1 &pcfg_pull_none>,
+						<0 RK_PB3 1 &pcfg_pull_none>,
+						<0 RK_PB4 1 &pcfg_pull_none>,
+						<0 RK_PB5 1 &pcfg_pull_none>,
+						<0 RK_PB6 1 &pcfg_pull_none>;
+			};
+
+			i2s1_bus: i2s1-bus {
+				rockchip,pins = <1 RK_PA0 1 &pcfg_pull_none>,
+						<1 RK_PA1 1 &pcfg_pull_none>,
+						<1 RK_PA2 1 &pcfg_pull_none>,
+						<1 RK_PA3 1 &pcfg_pull_none>,
+						<1 RK_PA4 1 &pcfg_pull_none>,
+						<1 RK_PA5 1 &pcfg_pull_none>;
+			};
+		};
+
+		lcdc {
+			lcdc_dclk: lcdc-dclk {
+				rockchip,pins = <2 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			lcdc_den: lcdc-den {
+				rockchip,pins = <2 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			lcdc_hsync: lcdc-hsync {
+				rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			lcdc_vsync: lcdc-vsync {
+				rockchip,pins = <2 RK_PB2 1 &pcfg_pull_none>;
+			};
+
+			lcdc_rgb24: lcdc-rgb24 {
+				rockchip,pins = <2 RK_PB4 1 &pcfg_pull_none>,
+						<2 RK_PB5 1 &pcfg_pull_none>,
+						<2 RK_PB6 1 &pcfg_pull_none>,
+						<2 RK_PB7 1 &pcfg_pull_none>,
+						<2 RK_PC0 1 &pcfg_pull_none>,
+						<2 RK_PC1 1 &pcfg_pull_none>,
+						<2 RK_PC2 1 &pcfg_pull_none>,
+						<2 RK_PC3 1 &pcfg_pull_none>,
+						<2 RK_PC4 1 &pcfg_pull_none>,
+						<2 RK_PC5 1 &pcfg_pull_none>,
+						<2 RK_PC6 1 &pcfg_pull_none>,
+						<2 RK_PC7 1 &pcfg_pull_none>,
+						<2 RK_PD0 1 &pcfg_pull_none>,
+						<2 RK_PD1 1 &pcfg_pull_none>;
+			};
+		};
+
+		nfc {
+			flash_ale: flash-ale {
+				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>;
+			};
+
+			flash_cle: flash-cle {
+				rockchip,pins = <2 RK_PA1 1 &pcfg_pull_none>;
+			};
+
+			flash_wrn: flash-wrn {
+				rockchip,pins = <2 RK_PA2 1 &pcfg_pull_none>;
+			};
+
+			flash_rdn: flash-rdn {
+				rockchip,pins = <2 RK_PA3 1 &pcfg_pull_none>;
+			};
+
+			flash_rdy: flash-rdy {
+				rockchip,pins = <2 RK_PA4 1 &pcfg_pull_none>;
+			};
+
+			flash_cs0: flash-cs0 {
+				rockchip,pins = <2 RK_PA6 1 &pcfg_pull_none>;
+			};
+
+			flash_dqs: flash-dqs {
+				rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>;
+			};
+
+			flash_bus8: flash-bus8 {
+				rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>,
+						<1 RK_PD1 1 &pcfg_pull_none>,
+						<1 RK_PD2 1 &pcfg_pull_none>,
+						<1 RK_PD3 1 &pcfg_pull_none>,
+						<1 RK_PD4 1 &pcfg_pull_none>,
+						<1 RK_PD5 1 &pcfg_pull_none>,
+						<1 RK_PD6 1 &pcfg_pull_none>,
+						<1 RK_PD7 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <0 RK_PD2 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <0 RK_PD4 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <3 RK_PD2 1 &pcfg_pull_none>;
+			};
+		};
+
+		sdio {
+			sdio_clk: sdio-clk {
+				rockchip,pins = <1 RK_PA0 2 &pcfg_pull_none>;
+			};
+
+			sdio_cmd: sdio-cmd {
+				rockchip,pins = <0 RK_PA3 2 &pcfg_pull_default>;
+			};
+
+			sdio_pwren: sdio-pwren {
+				rockchip,pins = <0 RK_PD6 1 &pcfg_pull_default>;
+			};
+
+			sdio_bus4: sdio-bus4 {
+				rockchip,pins = <1 RK_PA1 2 &pcfg_pull_default>,
+						<1 RK_PA2 2 &pcfg_pull_default>,
+						<1 RK_PA4 2 &pcfg_pull_default>,
+						<1 RK_PA5 2 &pcfg_pull_default>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>;
+			};
+
+			sdmmc_wp: sdmmc-wp {
+				rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>;
+			};
+
+			sdmmc_pwren: sdmmc-pwren {
+				rockchip,pins = <1 RK_PB6 1 &pcfg_pull_default>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>,
+						<1 RK_PC3 1 &pcfg_pull_default>,
+						<1 RK_PC4 1 &pcfg_pull_default>,
+						<1 RK_PC5 1 &pcfg_pull_default>;
+			};
+		};
+
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins = <3 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>;
+			};
+
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins = <1 RK_PB3 1 &pcfg_pull_default>;
+			};
+
+			spi0_tx: spi0-tx {
+				rockchip,pins = <1 RK_PB1 1 &pcfg_pull_default>;
+			};
+
+			spi0_rx: spi0-rx {
+				rockchip,pins = <1 RK_PB2 1 &pcfg_pull_default>;
+			};
+
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins = <1 RK_PB4 1 &pcfg_pull_default>;
+			};
+
+			spi1_clk: spi1-clk {
+				rockchip,pins = <2 RK_PA0 2 &pcfg_pull_default>;
+			};
+
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins = <1 RK_PD6 3 &pcfg_pull_default>;
+			};
+
+			spi1_tx: spi1-tx {
+				rockchip,pins = <1 RK_PD5 3 &pcfg_pull_default>;
+			};
+
+			spi1_rx: spi1-rx {
+				rockchip,pins = <1 RK_PD4 3 &pcfg_pull_default>;
+			};
+
+			spi1_cs1: spi1-cs1 {
+				rockchip,pins = <1 RK_PD7 3 &pcfg_pull_default>;
+			};
+
+			spi2_clk: spi2-clk {
+				rockchip,pins = <0 RK_PB1 2 &pcfg_pull_default>;
+			};
+
+			spi2_cs0: spi2-cs0 {
+				rockchip,pins = <0 RK_PB6 2 &pcfg_pull_default>;
+			};
+
+			spi2_tx: spi2-tx {
+				rockchip,pins = <0 RK_PB3 2 &pcfg_pull_default>;
+			};
+
+			spi2_rx: spi2-rx {
+				rockchip,pins = <0 RK_PB5 2 &pcfg_pull_default>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <2 RK_PD2 2 &pcfg_pull_default>,
+						<2 RK_PD3 2 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <2 RK_PD5 2 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 RK_PC1 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <1 RK_PB1 2 &pcfg_pull_default>,
+						<1 RK_PB2 2 &pcfg_pull_default>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <1 RK_PB0 2 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <1 RK_PB3 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_default>,
+						<1 RK_PC3 2 &pcfg_pull_none>;
+			};
+
+			uart2_cts: uart2-cts {
+				rockchip,pins = <0 RK_PD1 1 &pcfg_pull_none>;
+			};
+
+			uart2_rts: uart2-rts {
+				rockchip,pins = <0 RK_PD0 1 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index 66a0ff196eb1..9312be362a7a 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -7,12 +7,19 @@
 /dts-v1/;
 #include <dt-bindings/i2c/i2c.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include "rk3188.dtsi"
 
 / {
 	model = "BQ Edison2 Quad-Core";
 	compatible = "mundoreader,bq-edison2qc", "rockchip,rk3188";
 
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &emmc;
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x80000000>;
@@ -30,7 +37,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwr_key &usb_int>;
 
-		power {
+		key-power {
 			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
@@ -39,7 +46,7 @@
 			wakeup-source;
 		};
 
-		wake_on_usb: wake-on-usb {
+		wake_on_usb: key-wake-on-usb {
 			label = "Wake-on-USB";
 			gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -479,7 +486,7 @@
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio3>;
-		interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>;
+		interrupts = <RK_PD2 IRQ_TYPE_NONE>;
 		interrupt-names = "host-wake";
 		brcm,drive-strength = <5>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
index c32e1d441cf7..0a1ae689b162 100644
--- a/arch/arm/boot/dts/rk3188-px3-evb.dts
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -11,6 +11,11 @@
 	model = "Rockchip PX3-EVB";
 	compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
 
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &emmc;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -24,7 +29,7 @@
 		compatible = "gpio-keys";
 		autorepeat;
 
-		power {
+		key-power {
 			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
@@ -207,7 +212,7 @@
 				regulator-name = "wl_18";
 			};
 
-			lcd_33: SWITCH_REG1 {
+			lcd_33: SWITCH_REG {
 				regulator-name = "lcd_33";
 			};
 		};
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index b0fef82c0a71..118deacd38c4 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -11,6 +11,10 @@
 	model = "Radxa Rock";
 	compatible = "radxa,rock", "rockchip,rk3188";
 
+	aliases {
+		mmc0 = &mmc0;
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x80000000>;
@@ -20,7 +24,7 @@
 		compatible = "gpio-keys";
 		autorepeat;
 
-		power {
+		key-power {
 			gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
@@ -67,7 +71,7 @@
 		#sound-dai-cells = <0>;
 	};
 
-	ir_recv: gpio-ir-receiver {
+	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
@@ -122,18 +126,21 @@
 };
 
 &emac {
-	status = "okay";
-
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+	status = "okay";
 
-	phy = <&phy0>;
-	phy-supply = <&vcc_rmii>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 2298a8d840ba..44b54af0bbf9 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -54,7 +54,7 @@
 		};
 	};
 
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -150,16 +150,16 @@
 		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
 		reg = <0x2000e000 0x20>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER3>, <&cru PCLK_TIMER3>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER3>, <&cru SCLK_TIMER3>;
+		clock-names = "pclk", "timer";
 	};
 
 	timer6: timer@200380a0 {
 		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
 		reg = <0x200380a0 0x20>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER6>, <&cru PCLK_TIMER0>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER6>;
+		clock-names = "pclk", "timer";
 	};
 
 	i2s0: i2s@1011a000 {
@@ -195,8 +195,9 @@
 	cru: clock-controller@20000000 {
 		compatible = "rockchip,rk3188-cru";
 		reg = <0x20000000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
-
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
@@ -214,30 +215,6 @@
 		};
 	};
 
-	usbphy: phy {
-		compatible = "rockchip,rk3188-usb-phy", "rockchip,rk3288-usb-phy";
-		rockchip,grf = <&grf>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-
-		usbphy0: usb-phy@10c {
-			#phy-cells = <0>;
-			reg = <0x10c>;
-			clocks = <&cru SCLK_OTGPHY0>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-		};
-
-		usbphy1: usb-phy@11c {
-			#phy-cells = <0>;
-			reg = <0x11c>;
-			clocks = <&cru SCLK_OTGPHY1>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-		};
-	};
-
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3188-pinctrl";
 		rockchip,grf = <&grf>;
@@ -247,7 +224,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		gpio0: gpio0@2000a000 {
+		gpio0: gpio@2000a000 {
 			compatible = "rockchip,rk3188-gpio-bank0";
 			reg = <0x2000a000 0x100>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -260,7 +237,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio1: gpio1@2003c000 {
+		gpio1: gpio@2003c000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x2003c000 0x100>;
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -273,7 +250,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio2: gpio2@2003e000 {
+		gpio2: gpio@2003e000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x2003e000 0x100>;
 			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -286,7 +263,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio3: gpio3@20080000 {
+		gpio3: gpio@20080000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x20080000 0x100>;
 			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -299,15 +276,15 @@
 			#interrupt-cells = <2>;
 		};
 
-		pcfg_pull_up: pcfg_pull_up {
+		pcfg_pull_up: pcfg-pull-up {
 			bias-pull-up;
 		};
 
-		pcfg_pull_down: pcfg_pull_down {
+		pcfg_pull_down: pcfg-pull-down {
 			bias-pull-down;
 		};
 
-		pcfg_pull_none: pcfg_pull_none {
+		pcfg_pull_none: pcfg-pull-none {
 			bias-disable;
 		};
 
@@ -402,7 +379,7 @@
 				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
 			};
 
-			lcdc1_rgb24: ldcd1-rgb24 {
+			lcdc1_rgb24: lcdc1-rgb24 {
 				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
 						<2 RK_PA1 1 &pcfg_pull_none>,
 						<2 RK_PA2 1 &pcfg_pull_none>,
@@ -630,7 +607,6 @@
 
 &global_timer {
 	interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-	status = "disabled";
 };
 
 &local_timer {
@@ -662,6 +638,38 @@
 	power-domains = <&power RK3188_PD_GPU>;
 };
 
+&grf {
+	compatible = "rockchip,rk3188-grf", "syscon", "simple-mfd";
+
+	io_domains: io-domains {
+		compatible = "rockchip,rk3188-io-voltage-domain";
+		status = "disabled";
+	};
+
+	usbphy: usbphy {
+		compatible = "rockchip,rk3188-usb-phy";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		usbphy0: usb-phy@10c {
+			reg = <0x10c>;
+			clocks = <&cru SCLK_OTGPHY0>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+		};
+
+		usbphy1: usb-phy@11c {
+			reg = <0x11c>;
+			clocks = <&cru SCLK_OTGPHY1>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+		};
+	};
+};
+
 &i2c0 {
 	compatible = "rockchip,rk3188-i2c";
 	pinctrl-names = "default";
@@ -699,7 +707,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pd_vio@RK3188_PD_VIO {
+		power-domain@RK3188_PD_VIO {
 			reg = <RK3188_PD_VIO>;
 			clocks = <&cru ACLK_LCDC0>,
 				 <&cru ACLK_LCDC1>,
@@ -719,21 +727,24 @@
 				 <&qos_cif0>,
 				 <&qos_ipp>,
 				 <&qos_rga>;
+			#power-domain-cells = <0>;
 		};
 
-		pd_video@RK3188_PD_VIDEO {
+		power-domain@RK3188_PD_VIDEO {
 			reg = <RK3188_PD_VIDEO>;
 			clocks = <&cru ACLK_VDPU>,
 				 <&cru ACLK_VEPU>,
 				 <&cru HCLK_VDPU>,
 				 <&cru HCLK_VEPU>;
 			pm_qos = <&qos_vpu>;
+			#power-domain-cells = <0>;
 		};
 
-		pd_gpu@RK3188_PD_GPU {
+		power-domain@RK3188_PD_GPU {
 			reg = <RK3188_PD_GPU>;
 			clocks = <&cru ACLK_GPU>;
 			pm_qos = <&qos_gpu>;
+			#power-domain-cells = <0>;
 		};
 	};
 };
@@ -794,6 +805,11 @@
 	pinctrl-0 = <&uart3_xfer>;
 };
 
+&vpu {
+	compatible = "rockchip,rk3188-vpu", "rockchip,rk3066-vpu";
+	power-domains = <&power RK3188_PD_VIDEO>;
+};
+
 &wdt {
 	compatible = "rockchip,rk3188-wdt", "snps,dw-wdt";
 };
diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
index aed879db6c15..69a5e239ed1a 100644
--- a/arch/arm/boot/dts/rk3228-evb.dts
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -8,6 +8,10 @@
 	model = "Rockchip RK3228 Evaluation board";
 	compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
 
+	aliases {
+		mmc0 = &emmc;
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts
index 350497a3ca86..5c3d08e3eea3 100644
--- a/arch/arm/boot/dts/rk3229-evb.dts
+++ b/arch/arm/boot/dts/rk3229-evb.dts
@@ -9,6 +9,10 @@
 	model = "Rockchip RK3229 Evaluation board";
 	compatible = "rockchip,rk3229-evb", "rockchip,rk3229";
 
+	aliases {
+		mmc0 = &emmc;
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
@@ -103,7 +107,7 @@
 		regulator-boot-on;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts
index 263393ac4fa6..7bfbfd11fb55 100644
--- a/arch/arm/boot/dts/rk3229-xms6.dts
+++ b/arch/arm/boot/dts/rk3229-xms6.dts
@@ -9,6 +9,12 @@
 	model = "Mecer Xtreme Mini S6";
 	compatible = "mecer,xms6", "rockchip,rk3229";
 
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdio;
+		mmc2 = &emmc;
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
diff --git a/arch/arm/boot/dts/rk3229.dtsi b/arch/arm/boot/dts/rk3229.dtsi
index cb7d3fad8e60..c340fb30e775 100644
--- a/arch/arm/boot/dts/rk3229.dtsi
+++ b/arch/arm/boot/dts/rk3229.dtsi
@@ -10,7 +10,7 @@
 
 	/delete-node/ opp-table0;
 
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index a4dd50aaf3fc..ffc16d6b97e1 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/clock/rk3228-cru.h>
 #include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/power/rk3228-power.h>
 
 / {
 	#address-cells = <1>;
@@ -14,9 +15,6 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
-		mmc0 = &sdmmc;
-		mmc1 = &sdio;
-		mmc2 = &emmc;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -70,7 +68,7 @@
 		};
 	};
 
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -193,7 +191,65 @@
 			status = "disabled";
 		};
 
-		u2phy0: usb2-phy@760 {
+		power: power-controller {
+			compatible = "rockchip,rk3228-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-domain@RK3228_PD_VIO {
+				reg = <RK3228_PD_VIO>;
+				clocks = <&cru ACLK_HDCP>,
+					 <&cru SCLK_HDCP>,
+					 <&cru ACLK_IEP>,
+					 <&cru HCLK_IEP>,
+					 <&cru ACLK_RGA>,
+					 <&cru HCLK_RGA>,
+					 <&cru SCLK_RGA>;
+				pm_qos = <&qos_hdcp>,
+					 <&qos_iep>,
+					 <&qos_rga_r>,
+					 <&qos_rga_w>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3228_PD_VOP {
+				reg = <RK3228_PD_VOP>;
+				clocks =<&cru ACLK_VOP>,
+					<&cru DCLK_VOP>,
+					<&cru HCLK_VOP>;
+				pm_qos = <&qos_vop>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3228_PD_VPU {
+				reg = <RK3228_PD_VPU>;
+				clocks = <&cru ACLK_VPU>,
+					 <&cru HCLK_VPU>;
+				pm_qos = <&qos_vpu>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3228_PD_RKVDEC {
+				reg = <RK3228_PD_RKVDEC>;
+				clocks = <&cru ACLK_RKVDEC>,
+					 <&cru HCLK_RKVDEC>,
+					 <&cru SCLK_VDEC_CABAC>,
+					 <&cru SCLK_VDEC_CORE>;
+				pm_qos = <&qos_rkvdec_r>,
+					 <&qos_rkvdec_w>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3228_PD_GPU {
+				reg = <RK3228_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+				pm_qos = <&qos_gpu>;
+				#power-domain-cells = <0>;
+			};
+		};
+
+		u2phy0: usb2phy@760 {
 			compatible = "rockchip,rk3228-usb2phy";
 			reg = <0x0760 0x0c>;
 			clocks = <&cru SCLK_OTGPHY0>;
@@ -220,7 +276,7 @@
 			};
 		};
 
-		u2phy1: usb2-phy@800 {
+		u2phy1: usb2phy@800 {
 			compatible = "rockchip,rk3228-usb2phy";
 			reg = <0x0800 0x0c>;
 			clocks = <&cru SCLK_OTGPHY1>;
@@ -370,7 +426,7 @@
 	};
 
 	wdt: watchdog@110a0000 {
-		compatible = "snps,dw-wdt";
+		compatible = "rockchip,rk3228-wdt", "snps,dw-wdt";
 		reg = <0x110a0000 0x100>;
 		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru PCLK_CPU>;
@@ -382,7 +438,6 @@
 		reg = <0x110b0000 0x10>;
 		#pwm-cells = <3>;
 		clocks = <&cru PCLK_PWM>;
-		clock-names = "pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm0_pin>;
 		status = "disabled";
@@ -393,7 +448,6 @@
 		reg = <0x110b0010 0x10>;
 		#pwm-cells = <3>;
 		clocks = <&cru PCLK_PWM>;
-		clock-names = "pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm1_pin>;
 		status = "disabled";
@@ -404,7 +458,6 @@
 		reg = <0x110b0020 0x10>;
 		#pwm-cells = <3>;
 		clocks = <&cru PCLK_PWM>;
-		clock-names = "pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm2_pin>;
 		status = "disabled";
@@ -415,7 +468,6 @@
 		reg = <0x110b0030 0x10>;
 		#pwm-cells = <2>;
 		clocks = <&cru PCLK_PWM>;
-		clock-names = "pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm3_pin>;
 		status = "disabled";
@@ -425,13 +477,15 @@
 		compatible = "rockchip,rk3228-timer", "rockchip,rk3288-timer";
 		reg = <0x110c0000 0x20>;
 		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&xin24m>, <&cru PCLK_TIMER>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
 	};
 
 	cru: clock-controller@110e0000 {
 		compatible = "rockchip,rk3228-cru";
 		reg = <0x110e0000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -449,7 +503,7 @@
 			<75000000>;
 	};
 
-	pdma: pdma@110f0000 {
+	pdma: dma-controller@110f0000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x110f0000 0x4000>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
@@ -520,7 +574,7 @@
 		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
 		pinctrl-2 = <&otp_pin>;
-		#thermal-sensor-cells = <0>;
+		#thermal-sensor-cells = <1>;
 		rockchip,hw-tshut-temp = <95000>;
 		status = "disabled";
 	};
@@ -553,30 +607,54 @@
 				  "ppmmu1";
 		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
 		clock-names = "bus", "core";
+		power-domains = <&power RK3228_PD_GPU>;
 		resets = <&cru SRST_GPU_A>;
 		status = "disabled";
 	};
 
+	vpu: video-codec@20020000 {
+		compatible = "rockchip,rk3228-vpu", "rockchip,rk3399-vpu";
+		reg = <0x20020000 0x800>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vepu", "vdpu";
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "hclk";
+		iommus = <&vpu_mmu>;
+		power-domains = <&power RK3228_PD_VPU>;
+	};
+
 	vpu_mmu: iommu@20020800 {
 		compatible = "rockchip,iommu";
 		reg = <0x20020800 0x100>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vpu_mmu";
 		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
-		status = "disabled";
+		power-domains = <&power RK3228_PD_VPU>;
+		#iommu-cells = <0>;
+	};
+
+	vdec: video-codec@20030000 {
+		compatible = "rockchip,rk3228-vdec", "rockchip,rk3399-vdec";
+		reg = <0x20030000 0x480>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>,
+			 <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;
+		clock-names = "axi", "ahb", "cabac", "core";
+		assigned-clocks = <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;
+		assigned-clock-rates = <300000000>, <300000000>;
+		iommus = <&vdec_mmu>;
+		power-domains = <&power RK3228_PD_RKVDEC>;
 	};
 
 	vdec_mmu: iommu@20030480 {
 		compatible = "rockchip,iommu";
 		reg = <0x20030480 0x40>, <0x200304c0 0x40>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vdec_mmu";
 		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
-		status = "disabled";
+		power-domains = <&power RK3228_PD_RKVDEC>;
+		#iommu-cells = <0>;
 	};
 
 	vop: vop@20050000 {
@@ -588,6 +666,7 @@
 		resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
 		reset-names = "axi", "ahb", "dclk";
 		iommus = <&vop_mmu>;
+		power-domains = <&power RK3228_PD_VOP>;
 		status = "disabled";
 
 		vop_out: port {
@@ -605,9 +684,9 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20053f00 0x100>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vop_mmu";
 		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
 		clock-names = "aclk", "iface";
+		power-domains = <&power RK3228_PD_VOP>;
 		#iommu-cells = <0>;
 		status = "disabled";
 	};
@@ -618,6 +697,7 @@
 		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
 		clock-names = "aclk", "hclk", "sclk";
+		power-domains = <&power RK3228_PD_VIO>;
 		resets = <&cru SRST_RGA>, <&cru SRST_RGA_A>, <&cru SRST_RGA_H>;
 		reset-names = "core", "axi", "ahb";
 	};
@@ -626,10 +706,10 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20070800 0x100>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "iep_mmu";
 		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		power-domains = <&power RK3228_PD_VIO>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
@@ -640,8 +720,8 @@
 		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		assigned-clocks = <&cru SCLK_HDMI_PHY>;
 		assigned-clock-parents = <&hdmi_phy>;
-		clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>;
-		clock-names = "isfr", "iahb", "cec";
+		clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
+		clock-names = "iahb", "isfr", "cec";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
 		resets = <&cru SRST_HDMI_P>;
@@ -803,6 +883,51 @@
 		status = "disabled";
 	};
 
+	qos_iep: qos@31030080 {
+		compatible = "rockchip,rk3228-qos", "syscon";
+		reg = <0x31030080 0x20>;
+	};
+
+	qos_rga_w: qos@31030100 {
+		compatible = "rockchip,rk3228-qos", "syscon";
+		reg = <0x31030100 0x20>;
+	};
+
+	qos_hdcp: qos@31030180 {
+		compatible = "rockchip,rk3228-qos", "syscon";
+		reg = <0x31030180 0x20>;
+	};
+
+	qos_rga_r: qos@31030200 {
+		compatible = "rockchip,rk3228-qos", "syscon";
+		reg = <0x31030200 0x20>;
+	};
+
+	qos_vpu: qos@31040000 {
+		compatible = "rockchip,rk3228-qos", "syscon";
+		reg = <0x31040000 0x20>;
+	};
+
+	qos_gpu: qos@31050000 {
+		compatible = "rockchip,rk3228-qos", "syscon";
+		reg = <0x31050000 0x20>;
+	};
+
+	qos_vop: qos@31060000 {
+		compatible = "rockchip,rk3228-qos", "syscon";
+		reg = <0x31060000 0x20>;
+	};
+
+	qos_rkvdec_r: qos@31070000 {
+		compatible = "rockchip,rk3228-qos", "syscon";
+		reg = <0x31070000 0x20>;
+	};
+
+	qos_rkvdec_w: qos@31070080 {
+		compatible = "rockchip,rk3228-qos", "syscon";
+		reg = <0x31070080 0x20>;
+	};
+
 	gic: interrupt-controller@32010000 {
 		compatible = "arm,gic-400";
 		interrupt-controller;
@@ -823,7 +948,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		gpio0: gpio0@11110000 {
+		gpio0: gpio@11110000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x11110000 0x100>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
@@ -836,7 +961,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio1: gpio1@11120000 {
+		gpio1: gpio@11120000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x11120000 0x100>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
@@ -849,7 +974,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio2: gpio2@11130000 {
+		gpio2: gpio@11130000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x11130000 0x100>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -862,7 +987,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio3: gpio3@11140000 {
+		gpio3: gpio@11140000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x11140000 0x100>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index be695b8c1f67..8a635c243127 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -54,7 +54,7 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563@51 {
+	rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index c4ca73b40d4a..382d2839cf47 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -28,19 +28,19 @@
 			press-threshold-microvolt = <300000>;
 		};
 
-		menu {
+		button-menu {
 			label = "Menu";
 			linux,code = <KEY_MENU>;
 			press-threshold-microvolt = <640000>;
 		};
 
-		esc {
+		button-esc {
 			label = "Esc";
 			linux,code = <KEY_ESC>;
 			press-threshold-microvolt = <1000000>;
 		};
 
-		home  {
+		button-home  {
 			label = "Home";
 			linux,code = <KEY_HOME>;
 			press-threshold-microvolt = <1300000>;
@@ -118,7 +118,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwrbtn>;
 
-		power {
+		key-power {
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index 9a4a9749c405..a5a0826341e6 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -27,7 +27,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			wakeup-source;
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 7fb582302b32..3836c61cfb76 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -49,7 +49,7 @@
 	keys: gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			wakeup-source;
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
@@ -233,11 +233,10 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		interrupt-parent = <&gpio7>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index 713f55e143c6..db1eb648e0e1 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -162,11 +162,10 @@
 		vin-supply = <&vcc_sys>;
 	};
 
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 	};
 
diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
index 1e33859de484..1a5156951492 100644
--- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts
+++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
@@ -20,14 +20,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_button_pins>;
 
-		button@0 {
+		button-0 {
 			label = "home";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
 			wakeup-source;
 		};
 
-		button@1 {
+		button-1 {
 			label = "menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index 8c7376d64bc4..fd90f3b8fc32 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -30,7 +30,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwrbtn>;
 
-		power {
+		key-power {
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 55467bc30fa6..633e5a032463 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -31,7 +31,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwrbtn>;
 
-		power {
+		key-power {
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 44bb5e6f83b1..76363b8afcb9 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -218,7 +218,7 @@
 	flash0-supply = <&vcc_flash>;
 	flash1-supply = <&vccio_pmu>;
 	gpio30-supply = <&vccio_pmu>;
-	gpio1830 = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
 	lcdc-supply = <&vcc_io>;
 	sdcard-supply = <&vccio_sd>;
 	wifi-supply = <&vcc_18>;
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index c4d1d142d8c6..13cfdaa95cc7 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -28,7 +28,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
 			linux,code = <KEY_POWER>;
@@ -165,11 +165,10 @@
 };
 
 &i2c0 {
-	hym8563: hym8563@51 {
+	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "xin32k";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 9c1e38c54eae..09618bb7d872 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -26,14 +26,12 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwrbtn>;
 
-		button@0 {
+		button {
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
index a10d25ac8f7b..f9dde0eef527 100644
--- a/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-broadcom-bluetooth.dtsi
@@ -13,10 +13,10 @@
 			    <&bt_dev_wake>;
 
 		compatible = "brcm,bcm43540-bt";
-		host-wakeup-gpios	= <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
-		shutdown-gpios		= <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
-		device-wakeup-gpios	= <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
-		max-speed		= <3000000>;
-		brcm,bt-pcm-int-params	= [01 02 00 01 01];
+		host-wakeup-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		max-speed = <3000000>;
+		brcm,bt-pcm-int-params = [01 02 00 01 01];
 	};
 };
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index 05112c25176d..700bb548d6b2 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -32,7 +32,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&ap_lid_int_l>;
 
-		lid {
+		switch-lid {
 			label = "Lid";
 			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
 			wakeup-source;
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 82fc6fba9999..dcdcc55c4098 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -21,14 +21,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&volum_down_l &volum_up_l>;
 
-		volum_down {
+		key-volum-down {
 			label = "Volum_down";
 			gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 			debounce-interval = <100>;
 		};
 
-		volum_up {
+		key-volum-up {
 			label = "Volum_up";
 			gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
index 4e9fdb0f722d..e2a4e6232eb5 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -45,7 +45,7 @@
 &lid_switch {
 	pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
 
-	power {
+	key-power {
 		gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
 	};
 };
diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
index 27fb06ce907e..8b58773e592e 100644
--- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
@@ -5,6 +5,12 @@
  * Copyright 2015 Google, Inc
  */
 
+/ {
+	aliases {
+		mmc1 = &sdmmc;
+	};
+};
+
 &io_domains {
 	sdcard-supply = <&vccio_sd>;
 };
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 54a6838d73f5..d838bf0d5d9a 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -10,6 +10,10 @@
 #include "rk3288.dtsi"
 
 / {
+	aliases {
+		mmc0 = &emmc;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -29,7 +33,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwr_key_l>;
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
index 0ae2bd150e37..793951655b73 100644
--- a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
@@ -241,7 +241,6 @@
 		interrupt-parent = <&gpio5>;
 		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
 		clock-output-names = "hym8563";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hym8563_int>;
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index aa50f8ed4ca0..b156a83eb7d7 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -379,10 +379,10 @@
 	audio-supply = <&vcc_18>;
 	bb-supply = <&vcc_io>;
 	dvp-supply = <&vcc_io>;
-	flash0-suuply = <&vcc_18>;
+	flash0-supply = <&vcc_18>;
 	flash1-supply = <&vcc_lan>;
 	gpio30-supply = <&vcc_io>;
-	gpio1830 = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
 	lcdc-supply = <&vcc_io>;
 	sdcard-supply = <&vccio_sd>;
 	wifi-supply = <&vcc_18>;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index ea7416c31f9b..cb9cdaddffd4 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -100,7 +100,7 @@
 		};
 	};
 
-	cpu_opp_table: cpu-opp-table {
+	cpu_opp_table: opp-table-0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -196,8 +196,8 @@
 		compatible = "rockchip,rk3288-timer";
 		reg = <0x0 0xff810000 0x0 0x20>;
 		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&xin24m>, <&cru PCLK_TIMER>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
 	};
 
 	display-subsystem {
@@ -679,7 +679,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm0_pin>;
 		clocks = <&cru PCLK_RKPWM>;
-		clock-names = "pwm";
 		status = "disabled";
 	};
 
@@ -690,7 +689,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm1_pin>;
 		clocks = <&cru PCLK_RKPWM>;
-		clock-names = "pwm";
 		status = "disabled";
 	};
 
@@ -701,7 +699,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm2_pin>;
 		clocks = <&cru PCLK_RKPWM>;
-		clock-names = "pwm";
 		status = "disabled";
 	};
 
@@ -712,7 +709,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm3_pin>;
 		clocks = <&cru PCLK_RKPWM>;
-		clock-names = "pwm";
 		status = "disabled";
 	};
 
@@ -769,7 +765,7 @@
 			 *	*_HDMI		HDMI
 			 *	*_MIPI_*	MIPI
 			 */
-			pd_vio@RK3288_PD_VIO {
+			power-domain@RK3288_PD_VIO {
 				reg = <RK3288_PD_VIO>;
 				clocks = <&cru ACLK_IEP>,
 					 <&cru ACLK_ISP>,
@@ -805,19 +801,21 @@
 					 <&qos_vio2_rga_r>,
 					 <&qos_vio2_rga_w>,
 					 <&qos_vio1_isp_r>;
+				#power-domain-cells = <0>;
 			};
 
 			/*
 			 * Note: The following 3 are HEVC(H.265) clocks,
 			 * and on the ACLK_HEVC_NIU (NOC).
 			 */
-			pd_hevc@RK3288_PD_HEVC {
+			power-domain@RK3288_PD_HEVC {
 				reg = <RK3288_PD_HEVC>;
 				clocks = <&cru ACLK_HEVC>,
 					 <&cru SCLK_HEVC_CABAC>,
 					 <&cru SCLK_HEVC_CORE>;
 				pm_qos = <&qos_hevc_r>,
 					 <&qos_hevc_w>;
+				#power-domain-cells = <0>;
 			};
 
 			/*
@@ -825,22 +823,24 @@
 			 * (video endecoder & decoder) clocks that on the
 			 * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
 			 */
-			pd_video@RK3288_PD_VIDEO {
+			power-domain@RK3288_PD_VIDEO {
 				reg = <RK3288_PD_VIDEO>;
 				clocks = <&cru ACLK_VCODEC>,
 					 <&cru HCLK_VCODEC>;
 				pm_qos = <&qos_video>;
+				#power-domain-cells = <0>;
 			};
 
 			/*
 			 * Note: ACLK_GPU is the GPU clock,
 			 * and on the ACLK_GPU_NIU (NOC).
 			 */
-			pd_gpu@RK3288_PD_GPU {
+			power-domain@RK3288_PD_GPU {
 				reg = <RK3288_PD_GPU>;
 				clocks = <&cru ACLK_GPU>;
 				pm_qos = <&qos_gpu_r>,
 					 <&qos_gpu_w>;
+				#power-domain-cells = <0>;
 			};
 		};
 
@@ -862,6 +862,8 @@
 	cru: clock-controller@ff760000 {
 		compatible = "rockchip,rk3288-cru";
 		reg = <0x0 0xff760000 0x0 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -940,7 +942,7 @@
 		status = "disabled";
 	};
 
-	spdif: sound@ff88b0000 {
+	spdif: sound@ff8b0000 {
 		compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
 		reg = <0x0 0xff8b0000 0x0 0x10000>;
 		#sound-dai-cells = <0>;
@@ -971,7 +973,7 @@
 		status = "disabled";
 	};
 
-	crypto: cypto-controller@ff8a0000 {
+	crypto: crypto@ff8a0000 {
 		compatible = "rockchip,rk3288-crypto";
 		reg = <0x0 0xff8a0000 0x0 0x4000>;
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
@@ -980,14 +982,12 @@
 		clock-names = "aclk", "hclk", "sclk", "apb_pclk";
 		resets = <&cru SRST_CRYPTO>;
 		reset-names = "crypto-rst";
-		status = "okay";
 	};
 
 	iep_mmu: iommu@ff900800 {
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff900800 0x0 0x40>;
 		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "iep_mmu";
 		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
@@ -998,7 +998,6 @@
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "isp_mmu";
 		clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
@@ -1059,7 +1058,6 @@
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff930300 0x0 0x100>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vopb_mmu";
 		clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
 		clock-names = "aclk", "iface";
 		power-domains = <&power RK3288_PD_VIO>;
@@ -1109,7 +1107,6 @@
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff940300 0x0 0x100>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vopl_mmu";
 		clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
 		clock-names = "aclk", "iface";
 		power-domains = <&power RK3288_PD_VIO>;
@@ -1117,7 +1114,7 @@
 		status = "disabled";
 	};
 
-	mipi_dsi: mipi@ff960000 {
+	mipi_dsi: dsi@ff960000 {
 		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
 		reg = <0x0 0xff960000 0x0 0x4000>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -1128,18 +1125,28 @@
 		status = "disabled";
 
 		ports {
-			mipi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+
 				mipi_in_vopb: endpoint@0 {
 					reg = <0>;
 					remote-endpoint = <&vopb_out_mipi>;
 				};
+
 				mipi_in_vopl: endpoint@1 {
 					reg = <1>;
 					remote-endpoint = <&vopl_out_mipi>;
 				};
 			};
+
+			mipi_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
@@ -1160,7 +1167,6 @@
 
 			lvds_in: port@0 {
 				reg = <0>;
-
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1168,11 +1174,16 @@
 					reg = <0>;
 					remote-endpoint = <&vopb_out_lvds>;
 				};
+
 				lvds_in_vopl: endpoint@1 {
 					reg = <1>;
 					remote-endpoint = <&vopl_out_lvds>;
 				};
 			};
+
+			lvds_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
@@ -1184,6 +1195,7 @@
 		clock-names = "dp", "pclk";
 		phys = <&edp_phy>;
 		phy-names = "dp";
+		power-domains = <&power RK3288_PD_VIO>;
 		resets = <&cru SRST_EDP>;
 		reset-names = "dp";
 		rockchip,grf = <&grf>;
@@ -1192,19 +1204,26 @@
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
 			edp_in: port@0 {
 				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+
 				edp_in_vopb: endpoint@0 {
 					reg = <0>;
 					remote-endpoint = <&vopb_out_edp>;
 				};
+
 				edp_in_vopl: endpoint@1 {
 					reg = <1>;
 					remote-endpoint = <&vopl_out_edp>;
 				};
 			};
+
+			edp_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 
@@ -1252,7 +1271,6 @@
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff9a0800 0x0 0x100>;
 		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vpu_mmu";
 		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
@@ -1263,7 +1281,6 @@
 		compatible = "rockchip,iommu";
 		reg = <0x0 0xff9c0440 0x0 0x40>, <0x0 0xff9c0480 0x0 0x40>;
 		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hevc_mmu";
 		clocks = <&cru ACLK_HEVC>, <&cru HCLK_HEVC>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
@@ -1284,7 +1301,7 @@
 		status = "disabled";
 	};
 
-	gpu_opp_table: gpu-opp-table {
+	gpu_opp_table: opp-table-1 {
 		compatible = "operating-points-v2";
 
 		opp-100000000 {
@@ -1428,7 +1445,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		gpio0: gpio0@ff750000 {
+		gpio0: gpio@ff750000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff750000 0x0 0x100>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -1441,7 +1458,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio1: gpio1@ff780000 {
+		gpio1: gpio@ff780000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff780000 0x0 0x100>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -1454,7 +1471,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio2: gpio2@ff790000 {
+		gpio2: gpio@ff790000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff790000 0x0 0x100>;
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -1467,7 +1484,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio3: gpio3@ff7a0000 {
+		gpio3: gpio@ff7a0000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff7a0000 0x0 0x100>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -1480,7 +1497,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio4: gpio4@ff7b0000 {
+		gpio4: gpio@ff7b0000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff7b0000 0x0 0x100>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -1493,7 +1510,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio5: gpio5@ff7c0000 {
+		gpio5: gpio@ff7c0000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff7c0000 0x0 0x100>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -1506,7 +1523,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio6: gpio6@ff7d0000 {
+		gpio6: gpio@ff7d0000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff7d0000 0x0 0x100>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
@@ -1519,7 +1536,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio7: gpio7@ff7e0000 {
+		gpio7: gpio@ff7e0000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff7e0000 0x0 0x100>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
@@ -1532,7 +1549,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio8: gpio8@ff7f0000 {
+		gpio8: gpio@ff7f0000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff7f0000 0x0 0x100>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
@@ -1586,7 +1603,7 @@
 			drive-strength = <12>;
 		};
 
-		sleep {
+		suspend {
 			global_pwroff: global-pwroff {
 				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>;
 			};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 755c946f11de..cb4e42ede56a 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -21,9 +21,6 @@
 		i2c2 = &i2c2;
 		i2c3 = &i2c3;
 		i2c4 = &i2c4;
-		mshc0 = &emmc;
-		mshc1 = &mmc0;
-		mshc2 = &mmc1;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -50,6 +47,18 @@
 		status = "disabled";
 	};
 
+	vpu: video-codec@10104000 {
+		compatible = "rockchip,rk3066-vpu";
+		reg = <0x10104000 0x800>;
+		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vepu", "vdpu";
+		clocks = <&cru ACLK_VDPU>, <&cru HCLK_VDPU>,
+			 <&cru ACLK_VEPU>, <&cru HCLK_VEPU>;
+		clock-names = "aclk_vdpu", "hclk_vdpu",
+			      "aclk_vepu", "hclk_vepu";
+	};
+
 	L2: cache-controller@10138000 {
 		compatible = "arm,pl310-cache";
 		reg = <0x10138000 0x1000>;
@@ -67,6 +76,13 @@
 		reg = <0x1013c200 0x20>;
 		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 		clocks = <&cru CORE_PERI>;
+		status = "disabled";
+		/* The clock source and the sched_clock provided by the arm_global_timer
+		 * on Rockchip rk3066a/rk3188 are quite unstable because their rates
+		 * depend on the CPU frequency.
+		 * Keep the arm_global_timer disabled in order to have the
+		 * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
+		 */
 	};
 
 	local_timer: local-timer@1013c600 {
@@ -177,8 +193,6 @@
 		compatible = "snps,arc-emac";
 		reg = <0x10204000 0x3c>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		rockchip,grf = <&grf>;
 
@@ -256,7 +270,7 @@
 	};
 
 	grf: grf@20008000 {
-		compatible = "syscon";
+		compatible = "syscon", "simple-mfd";
 		reg = <0x20008000 0x200>;
 	};
 
diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts
index b1db924710c8..2d9994379eb2 100644
--- a/arch/arm/boot/dts/rv1108-elgin-r1.dts
+++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts
@@ -12,6 +12,10 @@
 	model = "Elgin RV1108 R1 board";
 	compatible = "elgin,rv1108-r1", "rockchip,rv1108";
 
+	aliases {
+		mmc0 = &emmc;
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x08000000>;
@@ -68,6 +72,7 @@
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
 		rockchip,system-power-controller;
+		#clock-cells = <0>;
 
 		vcc1-supply = <&vcc_sys>;
 		vcc2-supply = <&vcc_sys>;
@@ -78,7 +83,7 @@
 
 		regulators {
 			vdd_core: DCDC_REG1 {
-				regulator-name= "vdd_core";
+				regulator-name = "vdd_core";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
@@ -90,7 +95,7 @@
 			};
 
 			vdd_buck2: DCDC_REG2 {
-				regulator-name= "vdd_buck2";
+				regulator-name = "vdd_buck2";
 				regulator-min-microvolt = <2200000>;
 				regulator-max-microvolt = <2200000>;
 				regulator-always-on;
@@ -101,7 +106,7 @@
 			};
 
 			vcc_ddr: DCDC_REG3 {
-				regulator-name= "vcc_ddr";
+				regulator-name = "vcc_ddr";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
@@ -110,7 +115,7 @@
 			};
 
 			vcc_io: DCDC_REG4 {
-				regulator-name= "vcc_io";
+				regulator-name = "vcc_io";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
@@ -122,7 +127,7 @@
 			};
 
 			vdd_10: LDO_REG1 {
-				regulator-name= "vdd_10";
+				regulator-name = "vdd_10";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
@@ -133,7 +138,7 @@
 			};
 
 			vcc_18: LDO_REG2 {
-				regulator-name= "vcc_18";
+				regulator-name = "vcc_18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
@@ -144,7 +149,7 @@
 			};
 
 			vdd10_pmu: LDO_REG3 {
-				regulator-name= "vdd10_pmu";
+				regulator-name = "vdd10_pmu";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index 30f3d0470ad9..ef150f4ee99d 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -8,6 +8,10 @@
 	model = "Rockchip RV1108 Evaluation board";
 	compatible = "rockchip,rv1108-evb", "rockchip,rv1108";
 
+	aliases {
+		mmc0 = &sdmmc;
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x08000000>;
@@ -81,6 +85,7 @@
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
 		rockchip,system-power-controller;
+		#clock-cells = <0>;
 
 		vcc1-supply = <&vcc_sys>;
 		vcc2-supply = <&vcc_sys>;
@@ -91,7 +96,7 @@
 
 		regulators {
 			vdd_core: DCDC_REG1 {
-				regulator-name= "vdd_core";
+				regulator-name = "vdd_core";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
@@ -103,7 +108,7 @@
 			};
 
 			vdd_cam: DCDC_REG2 {
-				regulator-name= "vdd_cam";
+				regulator-name = "vdd_cam";
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <2000000>;
 				regulator-state-mem {
@@ -112,7 +117,7 @@
 			};
 
 			vcc_ddr: DCDC_REG3 {
-				regulator-name= "vcc_ddr";
+				regulator-name = "vcc_ddr";
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
@@ -121,7 +126,7 @@
 			};
 
 			vcc_io: DCDC_REG4 {
-				regulator-name= "vcc_io";
+				regulator-name = "vcc_io";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
@@ -133,7 +138,7 @@
 			};
 
 			vdd_10: LDO_REG1 {
-				regulator-name= "vdd_10";
+				regulator-name = "vdd_10";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
@@ -144,7 +149,7 @@
 			};
 
 			vcc_18: LDO_REG2 {
-				regulator-name= "vcc_18";
+				regulator-name = "vcc_18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
@@ -155,7 +160,7 @@
 			};
 
 			vdd10_pmu: LDO_REG3 {
-				regulator-name= "vdd10_pmu";
+				regulator-name = "vdd10_pmu";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 7319a2473b80..abf3006f0a84 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -19,9 +19,6 @@
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
 		i2c3 = &i2c3;
-		mmc0 = &emmc;
-		mmc1 = &sdio;
-		mmc2 = &sdmmc;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -43,7 +40,7 @@
 		};
 	};
 
-	cpu_opp_table: opp_table {
+	cpu_opp_table: opp-table-0 {
 		compatible = "operating-points-v2";
 
 		opp-408000000 {
@@ -88,24 +85,6 @@
 		#clock-cells = <0>;
 	};
 
-	amba: bus {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		pdma: pdma@102a0000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x102a0000 0x4000>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			arm,pl330-broken-no-flushp;
-			arm,pl330-periph-burst;
-			clocks = <&cru ACLK_DMAC>;
-			clock-names = "apb_pclk";
-		};
-	};
-
 	bus_intmem: sram@10080000 {
 		compatible = "mmio-sram";
 		reg = <0x10080000 0x2000>;
@@ -262,13 +241,29 @@
 		status = "disabled";
 	};
 
+	pdma: dma-controller@102a0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x102a0000 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		arm,pl330-broken-no-flushp;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC>;
+		clock-names = "apb_pclk";
+	};
+
 	grf: syscon@10300000 {
 		compatible = "rockchip,rv1108-grf", "syscon", "simple-mfd";
 		reg = <0x10300000 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		u2phy: usb2-phy@100 {
+		io_domains: io-domains {
+			compatible = "rockchip,rv1108-io-voltage-domain";
+			status = "disabled";
+		};
+
+		u2phy: usb2phy@100 {
 			compatible = "rockchip,rv1108-usb2phy";
 			reg = <0x100 0x0c>;
 			clocks = <&cru SCLK_USBPHY>;
@@ -298,16 +293,15 @@
 		compatible = "rockchip,rv1108-timer", "rockchip,rk3288-timer";
 		reg = <0x10350000 0x20>;
 		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&xin24m>, <&cru PCLK_TIMER>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
 	};
 
 	watchdog: watchdog@10360000 {
-		compatible = "snps,dw-wdt";
+		compatible = "rockchip,rv1108-wdt", "snps,dw-wdt";
 		reg = <0x10360000 0x100>;
 		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru PCLK_WDT>;
-		clock-names = "pclk_wdt";
 		status = "disabled";
 	};
 
@@ -438,8 +432,13 @@
 	};
 
 	pmugrf: syscon@20060000 {
-		compatible = "rockchip,rv1108-pmugrf", "syscon";
+		compatible = "rockchip,rv1108-pmugrf", "syscon", "simple-mfd";
 		reg = <0x20060000 0x1000>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rv1108-pmu-io-voltage-domain";
+			status = "disabled";
+		};
 	};
 
 	usbgrf: syscon@202a0000 {
@@ -450,6 +449,8 @@
 	cru: clock-controller@20200000 {
 		compatible = "rockchip,rv1108-cru";
 		reg = <0x20200000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -540,7 +541,18 @@
 		status = "disabled";
 	};
 
-	gmac: eth@30200000 {
+	sfc: spi@301c0000 {
+		compatible = "rockchip,sfc";
+		reg = <0x301c0000 0x4000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
+		pinctrl-names = "default";
+		status = "disabled";
+	};
+
+	gmac: ethernet@30200000 {
 		compatible = "rockchip,rv1108-gmac";
 		reg = <0x30200000 0x10000>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
@@ -583,7 +595,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		gpio0: gpio0@20030000 {
+		gpio0: gpio@20030000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x20030000 0x100>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
@@ -596,7 +608,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio1: gpio1@10310000 {
+		gpio1: gpio@10310000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x10310000 0x100>;
 			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
@@ -609,7 +621,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio2: gpio2@10320000 {
+		gpio2: gpio@10320000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x10320000 0x100>;
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
@@ -622,7 +634,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio3: gpio3@10330000 {
+		gpio3: gpio@10330000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x10330000 0x100>;
 			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
@@ -708,9 +720,35 @@
 			};
 		};
 
+		sfc {
+			sfc_bus4: sfc-bus4 {
+				rockchip,pins =
+					<2 RK_PA0 3 &pcfg_pull_none>,
+					<2 RK_PA1 3 &pcfg_pull_none>,
+					<2 RK_PA2 3 &pcfg_pull_none>,
+					<2 RK_PA3 3 &pcfg_pull_none>;
+			};
+
+			sfc_bus2: sfc-bus2 {
+				rockchip,pins =
+					<2 RK_PA0 3 &pcfg_pull_none>,
+					<2 RK_PA1 3 &pcfg_pull_none>;
+			};
+
+			sfc_cs0: sfc-cs0 {
+				rockchip,pins =
+					<2 RK_PB4 3 &pcfg_pull_none>;
+			};
+
+			sfc_clk: sfc-clk {
+				rockchip,pins =
+					<2 RK_PB7 2 &pcfg_pull_none>;
+			};
+		};
+
 		gmac {
 			rmii_pins: rmii-pins {
-				rockchip,pins =	<1 RK_PC5 2 &pcfg_pull_none>,
+				rockchip,pins = <1 RK_PC5 2 &pcfg_pull_none>,
 						<1 RK_PC3 2 &pcfg_pull_none>,
 						<1 RK_PC4 2 &pcfg_pull_none>,
 						<1 RK_PB2 3 &pcfg_pull_none_drv_12ma>,
diff --git a/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts b/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
new file mode 100644
index 000000000000..3340fc3f0739
--- /dev/null
+++ b/arch/arm/boot/dts/rv1126-edgeble-neu2-io.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/dts-v1/;
+#include "rv1126.dtsi"
+#include "rv1126-edgeble-neu2.dtsi"
+
+/ {
+	model = "Edgeble Neu2 IO Board";
+	compatible = "edgeble,neural-compute-module-2-io",
+		     "edgeble,neural-compute-module-2", "rockchip,rv1126";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&gmac {
+	assigned-clocks = <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>,
+			  <&cru CLK_GMAC_ETHERNET_OUT>;
+	assigned-clock-parents = <&cru CLK_GMAC_SRC_M1>, <&cru RGMII_MODE_CLK>;
+	assigned-clock-rates = <125000000>, <0>, <25000000>;
+	clock_in_out = "input";
+	phy-handle = <&phy>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins &clk_out_ethernetm1_pins>;
+	tx_delay = <0x2a>;
+	rx_delay = <0x1a>;
+	status = "okay";
+};
+
+&mdio {
+	phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c916",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		eth_phy_rst: eth-phy-rst {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rv1126-edgeble-neu2.dtsi b/arch/arm/boot/dts/rv1126-edgeble-neu2.dtsi
new file mode 100644
index 000000000000..cc64ba4be344
--- /dev/null
+++ b/arch/arm/boot/dts/rv1126-edgeble-neu2.dtsi
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+	compatible = "edgeble,neural-compute-module-2", "rockchip,rv1126";
+
+	aliases {
+		mmc0 = &emmc;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vccio_flash: vccio-flash-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&flash_vol_sel>;
+		regulator-name = "vccio_flash";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	sdio_pwrseq: pwrseq-sdio {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccio_flash>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_npu_vepu: DCDC_REG1 {
+				regulator-name = "vdd_npu_vepu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcc_0v8: LDO_REG1 {
+				regulator-name = "vcc_0v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG2 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd0v8_pmu: LDO_REG3 {
+				regulator-name = "vcc0v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <800000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_dovdd: LDO_REG5 {
+				regulator-name = "vcc_dovdd";
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_dvdd: LDO_REG6 {
+				regulator-name = "vcc_dvdd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_avdd: LDO_REG7 {
+				regulator-name = "vcc_avdd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: LDO_REG9 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_5v0: SWITCH_REG1 {
+				regulator-name = "vcc_5v0";
+			};
+
+			vcc_3v3: SWITCH_REG2 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	bt {
+		bt_enable: bt-enable {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	flash {
+		flash_vol_sel: flash-vol-sel {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio0-supply = <&vcc1v8_pmu>;
+	pmuio1-supply = <&vcc3v3_sys>;
+	vccio1-supply = <&vccio_flash>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_1v8>;
+	vccio4-supply = <&vcc_dovdd>;
+	vccio5-supply = <&vcc_1v8>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_dovdd>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <100000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
+	rockchip,default-sample-phase = <90>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca9377-bt";
+		clocks = <&rk809 1>;
+		enable-gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; /* BT_RST */
+		max-speed = <2000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_enable>;
+		vddxo-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
diff --git a/arch/arm/boot/dts/rv1126-pinctrl.dtsi b/arch/arm/boot/dts/rv1126-pinctrl.dtsi
new file mode 100644
index 000000000000..b77021772781
--- /dev/null
+++ b/arch/arm/boot/dts/rv1126-pinctrl.dtsi
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <arm64/rockchip/rockchip-pinconf.dtsi>
+
+/*
+ * This file is auto generated by pin2dts tool, please keep these code
+ * by adding changes at end of this file.
+ */
+&pinctrl {
+	clk_out_ethernet {
+		/omit-if-no-ref/
+		clk_out_ethernetm1_pins: clk-out-ethernetm1-pins {
+			rockchip,pins =
+				/* clk_out_ethernet_m1 */
+				<2 RK_PC5 2 &pcfg_pull_none>;
+		};
+	};
+	emmc {
+		/omit-if-no-ref/
+		emmc_rstnout: emmc-rstnout {
+			rockchip,pins =
+				/* emmc_rstn */
+				<1 RK_PA3 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins =
+				/* emmc_d0 */
+				<0 RK_PC4 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d1 */
+				<0 RK_PC5 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d2 */
+				<0 RK_PC6 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d3 */
+				<0 RK_PC7 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d4 */
+				<0 RK_PD0 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d5 */
+				<0 RK_PD1 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d6 */
+				<0 RK_PD2 2 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d7 */
+				<0 RK_PD3 2 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		emmc_clk: emmc-clk {
+			rockchip,pins =
+				/* emmc_clko */
+				<0 RK_PD7 2 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		emmc_cmd: emmc-cmd {
+			rockchip,pins =
+				/* emmc_cmd */
+				<0 RK_PD5 2 &pcfg_pull_up_drv_level_2>;
+		};
+	};
+	i2c0 {
+		/omit-if-no-ref/
+		i2c0_xfer: i2c0-xfer {
+			rockchip,pins =
+				/* i2c0_scl */
+				<0 RK_PB4 1 &pcfg_pull_none_drv_level_0_smt>,
+				/* i2c0_sda */
+				<0 RK_PB5 1 &pcfg_pull_none_drv_level_0_smt>;
+		};
+	};
+	rgmii {
+		/omit-if-no-ref/
+		rgmiim1_pins: rgmiim1-pins {
+			rockchip,pins =
+				/* rgmii_mdc_m1 */
+				<2 RK_PC2 2 &pcfg_pull_none>,
+				/* rgmii_mdio_m1 */
+				<2 RK_PC1 2 &pcfg_pull_none>,
+				/* rgmii_rxclk_m1 */
+				<2 RK_PD3 2 &pcfg_pull_none>,
+				/* rgmii_rxd0_m1 */
+				<2 RK_PB5 2 &pcfg_pull_none>,
+				/* rgmii_rxd1_m1 */
+				<2 RK_PB6 2 &pcfg_pull_none>,
+				/* rgmii_rxd2_m1 */
+				<2 RK_PC7 2 &pcfg_pull_none>,
+				/* rgmii_rxd3_m1 */
+				<2 RK_PD0 2 &pcfg_pull_none>,
+				/* rgmii_rxdv_m1 */
+				<2 RK_PB4 2 &pcfg_pull_none>,
+				/* rgmii_txclk_m1 */
+				<2 RK_PD2 2 &pcfg_pull_none_drv_level_3>,
+				/* rgmii_txd0_m1 */
+				<2 RK_PC3 2 &pcfg_pull_none_drv_level_3>,
+				/* rgmii_txd1_m1 */
+				<2 RK_PC4 2 &pcfg_pull_none_drv_level_3>,
+				/* rgmii_txd2_m1 */
+				<2 RK_PD1 2 &pcfg_pull_none_drv_level_3>,
+				/* rgmii_txd3_m1 */
+				<2 RK_PA4 2 &pcfg_pull_none_drv_level_3>,
+				/* rgmii_txen_m1 */
+				<2 RK_PC6 2 &pcfg_pull_none_drv_level_3>;
+		};
+	};
+	sdmmc0 {
+		/omit-if-no-ref/
+		sdmmc0_bus4: sdmmc0-bus4 {
+			rockchip,pins =
+				/* sdmmc0_d0 */
+				<1 RK_PA4 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d1 */
+				<1 RK_PA5 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d2 */
+				<1 RK_PA6 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d3 */
+				<1 RK_PA7 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc0_clk: sdmmc0-clk {
+			rockchip,pins =
+				/* sdmmc0_clk */
+				<1 RK_PB0 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc0_cmd: sdmmc0-cmd {
+			rockchip,pins =
+				/* sdmmc0_cmd */
+				<1 RK_PB1 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc0_det: sdmmc0-det {
+			rockchip,pins =
+				<0 RK_PA3 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		sdmmc0_pwr: sdmmc0-pwr {
+			rockchip,pins =
+				<0 RK_PC0 1 &pcfg_pull_none>;
+		};
+	};
+	sdmmc1 {
+		/omit-if-no-ref/
+		sdmmc1_bus4: sdmmc1-bus4 {
+			rockchip,pins =
+				/* sdmmc1_d0 */
+				<1 RK_PB4 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d1 */
+				<1 RK_PB5 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d2 */
+				<1 RK_PB6 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d3 */
+				<1 RK_PB7 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc1_clk: sdmmc1-clk {
+			rockchip,pins =
+				/* sdmmc1_clk */
+				<1 RK_PB2 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc1_cmd: sdmmc1-cmd {
+			rockchip,pins =
+				/* sdmmc1_cmd */
+				<1 RK_PB3 1 &pcfg_pull_up_drv_level_2>;
+		};
+		/omit-if-no-ref/
+		sdmmc1_det: sdmmc1-det {
+			rockchip,pins =
+				<1 RK_PD0 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		sdmmc1_pwr: sdmmc1-pwr {
+			rockchip,pins =
+				<1 RK_PD1 2 &pcfg_pull_none>;
+		};
+	};
+	uart0 {
+		/omit-if-no-ref/
+		uart0_xfer: uart0-xfer {
+			rockchip,pins =
+				/* uart0_rx */
+				<1 RK_PC2 1 &pcfg_pull_up>,
+				/* uart0_tx */
+				<1 RK_PC3 1 &pcfg_pull_up>;
+		};
+		/omit-if-no-ref/
+		uart0_ctsn: uart0-ctsn {
+			rockchip,pins =
+				<1 RK_PC1 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart0_rtsn: uart0-rtsn {
+			rockchip,pins =
+				<1 RK_PC0 1 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		uart0_rtsn_gpio: uart0-rts-pin {
+			rockchip,pins =
+				<1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+	uart1 {
+		/omit-if-no-ref/
+		uart1m0_xfer: uart1m0-xfer {
+			rockchip,pins =
+				/* uart1_rx_m0 */
+				<0 RK_PB7 2 &pcfg_pull_up>,
+				/* uart1_tx_m0 */
+				<0 RK_PB6 2 &pcfg_pull_up>;
+		};
+	};
+	uart2 {
+		/omit-if-no-ref/
+		uart2m1_xfer: uart2m1-xfer {
+			rockchip,pins =
+				/* uart2_rx_m1 */
+				<3 RK_PA3 1 &pcfg_pull_up>,
+				/* uart2_tx_m1 */
+				<3 RK_PA2 1 &pcfg_pull_up>;
+		};
+	};
+	uart3 {
+		/omit-if-no-ref/
+		uart3m0_xfer: uart3m0-xfer {
+			rockchip,pins =
+				/* uart3_rx_m0 */
+				<3 RK_PC7 4 &pcfg_pull_up>,
+				/* uart3_tx_m0 */
+				<3 RK_PC6 4 &pcfg_pull_up>;
+		};
+	};
+	uart4 {
+		/omit-if-no-ref/
+		uart4m0_xfer: uart4m0-xfer {
+			rockchip,pins =
+				/* uart4_rx_m0 */
+				<3 RK_PA5 4 &pcfg_pull_up>,
+				/* uart4_tx_m0 */
+				<3 RK_PA4 4 &pcfg_pull_up>;
+		};
+	};
+	uart5 {
+		/omit-if-no-ref/
+		uart5m0_xfer: uart5m0-xfer {
+			rockchip,pins =
+				/* uart5_rx_m0 */
+				<3 RK_PA7 4 &pcfg_pull_up>,
+				/* uart5_tx_m0 */
+				<3 RK_PA6 4 &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rv1126.dtsi b/arch/arm/boot/dts/rv1126.dtsi
new file mode 100644
index 000000000000..1f07d0a4fa73
--- /dev/null
+++ b/arch/arm/boot/dts/rv1126.dtsi
@@ -0,0 +1,487 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/clock/rockchip,rv1126-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rockchip,rv1126-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "rockchip,rv1126";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu2: cpu@f02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu3: cpu@f03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	grf: syscon@fe000000 {
+		compatible = "rockchip,rv1126-grf", "syscon", "simple-mfd";
+		reg = <0xfe000000 0x20000>;
+	};
+
+	pmugrf: syscon@fe020000 {
+		compatible = "rockchip,rv1126-pmugrf", "syscon", "simple-mfd";
+		reg = <0xfe020000 0x1000>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rv1126-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+	};
+
+	qos_emmc: qos@fe860000 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe860000 0x20>;
+	};
+
+	qos_nandc: qos@fe860080 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe860080 0x20>;
+	};
+
+	qos_sfc: qos@fe860200 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe860200 0x20>;
+	};
+
+	qos_sdio: qos@fe86c000 {
+		compatible = "rockchip,rv1126-qos", "syscon";
+		reg = <0xfe86c000 0x20>;
+	};
+
+	gic: interrupt-controller@feff0000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0xfeff1000 0x1000>,
+		      <0xfeff2000 0x2000>,
+		      <0xfeff4000 0x2000>,
+		      <0xfeff6000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pmu: power-management@ff3e0000 {
+		compatible = "rockchip,rv1126-pmu", "syscon", "simple-mfd";
+		reg = <0xff3e0000 0x1000>;
+
+		power: power-controller {
+			compatible = "rockchip,rv1126-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-domain@RV1126_PD_NVM {
+				reg = <RV1126_PD_NVM>;
+				clocks = <&cru HCLK_EMMC>,
+					 <&cru CLK_EMMC>,
+					 <&cru HCLK_NANDC>,
+					 <&cru CLK_NANDC>,
+					 <&cru HCLK_SFC>,
+					 <&cru HCLK_SFCXIP>,
+					 <&cru SCLK_SFC>;
+				pm_qos = <&qos_emmc>,
+					 <&qos_nandc>,
+					 <&qos_sfc>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RV1126_PD_SDIO {
+				reg = <RV1126_PD_SDIO>;
+				clocks = <&cru HCLK_SDIO>,
+					 <&cru CLK_SDIO>;
+				pm_qos = <&qos_sdio>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	i2c0: i2c@ff3f0000 {
+		compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c";
+		reg = <0xff3f0000 0x1000>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,grf = <&pmugrf>;
+		clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff410000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff410000 0x100>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&pmucru SCLK_UART1>, <&pmucru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 7>, <&dmac 6>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1m0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	pmucru: clock-controller@ff480000 {
+		compatible = "rockchip,rv1126-pmucru";
+		reg = <0xff480000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	cru: clock-controller@ff490000 {
+		compatible = "rockchip,rv1126-cru";
+		reg = <0xff490000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	dmac: dma-controller@ff4e0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0xff4e0000 0x4000>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC>;
+		clock-names = "apb_pclk";
+	};
+
+	uart0: serial@ff560000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff560000 0x100>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 5>, <&dmac 4>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff570000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff570000 0x100>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 9>, <&dmac 8>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m1_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff580000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff580000 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 11>, <&dmac 10>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3m0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff590000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff590000 0x100>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 13>, <&dmac 12>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4m0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart5: serial@ff5a0000 {
+		compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart";
+		reg = <0xff5a0000 0x100>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 15>, <&dmac 14>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart5m0_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	saradc: adc@ff5e0000 {
+		compatible = "rockchip,rv1126-saradc", "rockchip,rk3399-saradc";
+		reg = <0xff5e0000 0x100>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC_P>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	timer0: timer@ff660000 {
+		compatible = "rockchip,rv1126-timer", "rockchip,rk3288-timer";
+		reg = <0xff660000 0x20>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&cru CLK_TIMER0>;
+		clock-names = "pclk", "timer";
+	};
+
+	gmac: ethernet@ffc40000 {
+		compatible = "rockchip,rv1126-gmac", "snps,dwmac-4.20a";
+		reg = <0xffc40000 0x4000>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		rockchip,grf = <&grf>;
+		clocks = <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>,
+			 <&cru CLK_GMAC_TX_RX>, <&cru CLK_GMAC_REF>,
+			 <&cru ACLK_GMAC>, <&cru PCLK_GMAC>,
+			 <&cru CLK_GMAC_TX_RX>, <&cru CLK_GMAC_PTPREF>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "aclk_mac", "pclk_mac",
+			      "clk_mac_speed", "ptp_ref";
+		resets = <&cru SRST_GMAC_A>;
+		reset-names = "stmmaceth";
+
+		snps,mixed-burst;
+		snps,tso;
+
+		snps,axi-config = <&stmmac_axi_setup>;
+		snps,mtl-rx-config = <&mtl_rx_setup>;
+		snps,mtl-tx-config = <&mtl_tx_setup>;
+		status = "disabled";
+
+		mdio: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+		};
+
+		stmmac_axi_setup: stmmac-axi-config {
+			snps,wr_osr_lmt = <4>;
+			snps,rd_osr_lmt = <8>;
+			snps,blen = <0 0 0 0 16 8 4>;
+		};
+
+		mtl_rx_setup: rx-queues-config {
+			snps,rx-queues-to-use = <1>;
+			queue0 {};
+		};
+
+		mtl_tx_setup: tx-queues-config {
+			snps,tx-queues-to-use = <1>;
+			queue0 {};
+		};
+	};
+
+	emmc: mmc@ffc50000 {
+		compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0xffc50000 0x4000>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru CLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		power-domains = <&power RV1126_PD_NVM>;
+		status = "disabled";
+	};
+
+	sdmmc: mmc@ffc60000 {
+		compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0xffc60000 0x4000>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru CLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		status = "disabled";
+	};
+
+	sdio: mmc@ffc70000 {
+		compatible = "rockchip,rv1126-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0xffc70000 0x4000>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru CLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		power-domains = <&power RV1126_PD_SDIO>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rv1126-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio@ff460000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff460000 0x100>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@ff620000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff620000 0x100>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@ff630000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff630000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@ff640000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff640000 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@ff650000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff650000 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+#include "rv1126-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
deleted file mode 100644
index 92439ee5d7de..000000000000
--- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung S3C2416 pinctrl settings
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- */
-
-#include <dt-bindings/pinctrl/samsung.h>
-
-&pinctrl_0 {
-	/*
-	 * Pin banks
-	 */
-
-	gpa: gpa {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpb: gpb {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpc: gpc {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpd: gpd {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpe: gpe {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpf: gpf {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg: gpg {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gph: gph {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpj: gpj {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpk: gpk {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpl: gpl {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpm: gpm {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	/*
-	 * Pin groups
-	 */
-
-	uart0_data: uart0-data {
-		samsung,pins = "gph-0", "gph-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	uart0_fctl: uart0-fctl {
-		samsung,pins = "gph-8", "gph-9";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	uart1_data: uart1-data {
-		samsung,pins = "gph-2", "gph-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	uart1_fctl: uart1-fctl {
-		samsung,pins = "gph-10", "gph-11";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	uart2_data: uart2-data {
-		samsung,pins = "gph-4", "gph-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	uart2_fctl: uart2-fctl {
-		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	uart3_data: uart3-data {
-		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	extuart_clk: extuart-clk {
-		samsung,pins = "gph-12";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	i2c0_bus: i2c0-bus {
-		samsung,pins = "gpe-14", "gpe-15";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	spi0_bus: spi0-bus {
-		samsung,pins = "gpe-11", "gpe-12", "gpe-13";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	sd0_clk: sd0-clk {
-		samsung,pins = "gpe-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	sd0_cmd: sd0-cmd {
-		samsung,pins = "gpe-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	sd0_bus1: sd0-bus1 {
-		samsung,pins = "gpe-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	sd0_bus4: sd0-bus4 {
-		samsung,pins = "gpe-8", "gpe-9", "gpe-10";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	sd1_cmd: sd1-cmd {
-		samsung,pins = "gpl-8";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	sd1_clk: sd1-clk {
-		samsung,pins = "gpl-9";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	sd1_bus1: sd1-bus1 {
-		samsung,pins = "gpl-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-
-	sd1_bus4: sd1-bus4 {
-		samsung,pins = "gpl-1", "gpl-2", "gpl-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-	};
-};
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
deleted file mode 100644
index e7c379a9842e..000000000000
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung SMDK2416 board device tree source
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- */
-
-/dts-v1/;
-#include "s3c2416.dtsi"
-
-/ {
-	model = "SMDK2416";
-	compatible = "samsung,smdk2416", "samsung,s3c2416";
-
-	memory@30000000 {
-		device_type = "memory";
-		reg =  <0x30000000 0x4000000>;
-	};
-
-	xti: clock-0 {
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-		clock-output-names = "xti";
-		#clock-cells = <0>;
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sdhci_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
-			<&sd1_bus1>, <&sd1_bus4>;
-	bus-width = <4>;
-	broken-cd;
-	status = "okay";
-};
-
-&sdhci_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
-			<&sd0_bus1>, <&sd0_bus4>;
-	bus-width = <4>;
-	cd-gpios = <&gpf 1 0>;
-	cd-inverted;
-	status = "okay";
-};
-
-&uart_0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
-};
-
-&uart_1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
-};
-
-&uart_2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_data>;
-};
-
-&uart_3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_data>;
-};
-
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
deleted file mode 100644
index 4f084f4fe44f..000000000000
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's S3C2416 SoC device tree source
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- */
-
-#include <dt-bindings/clock/s3c2443.h>
-#include "s3c24xx.dtsi"
-#include "s3c2416-pinctrl.dtsi"
-
-/ {
-	model = "Samsung S3C2416 SoC";
-	compatible = "samsung,s3c2416";
-
-	aliases {
-		serial3 = &uart_3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-			reg = <0x0>;
-		};
-	};
-
-	clocks: clock-controller@4c000000 {
-		compatible = "samsung,s3c2416-clock";
-		reg = <0x4c000000 0x40>;
-		#clock-cells = <1>;
-	};
-
-	uart_3: serial@5000c000 {
-		compatible = "samsung,s3c2440-uart";
-		reg = <0x5000C000 0x4000>;
-		interrupts = <1 18 24 4>, <1 18 25 4>;
-		clock-names = "uart", "clk_uart_baud2",
-				"clk_uart_baud3";
-		clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
-				<&clocks SCLK_UART>;
-		status = "disabled";
-	};
-
-	sdhci_1: sdhci@4ac00000 {
-		compatible = "samsung,s3c6410-sdhci";
-		reg = <0x4AC00000 0x100>;
-		interrupts = <0 0 21 3>;
-		clock-names = "hsmmc", "mmc_busclk.0",
-				"mmc_busclk.2";
-		clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
-				<&clocks MUX_HSMMC0>;
-		status = "disabled";
-	};
-
-	sdhci_0: sdhci@4a800000 {
-		compatible = "samsung,s3c6410-sdhci";
-		reg = <0x4A800000 0x100>;
-		interrupts = <0 0 20 3>;
-		clock-names = "hsmmc", "mmc_busclk.0",
-				"mmc_busclk.2";
-		clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
-				<&clocks MUX_HSMMC1>;
-		status = "disabled";
-	};
-};
-
-&i2c {
-	compatible = "samsung,s3c2440-i2c";
-	clocks = <&clocks PCLK_I2C0>;
-	clock-names = "i2c";
-};
-
-&intc {
-	compatible = "samsung,s3c2416-irq";
-};
-
-&pinctrl_0 {
-	compatible = "samsung,s3c2416-pinctrl";
-};
-
-&rtc {
-	compatible = "samsung,s3c2416-rtc";
-	clocks = <&clocks PCLK_RTC>;
-	clock-names = "rtc";
-};
-
-&timer {
-	clocks = <&clocks PCLK_PWM>;
-	clock-names = "timers";
-};
-
-&uart_0 {
-	compatible = "samsung,s3c2440-uart";
-	clock-names = "uart", "clk_uart_baud2",
-			"clk_uart_baud3";
-	clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
-			<&clocks SCLK_UART>;
-};
-
-&uart_1 {
-	compatible = "samsung,s3c2440-uart";
-	clock-names = "uart", "clk_uart_baud2",
-			"clk_uart_baud3";
-	clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
-			<&clocks SCLK_UART>;
-};
-
-&uart_2 {
-	compatible = "samsung,s3c2440-uart";
-	clock-names = "uart", "clk_uart_baud2",
-			"clk_uart_baud3";
-	clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
-			<&clocks SCLK_UART>;
-};
-
-&watchdog {
-	interrupts = <1 9 27 3>;
-	clocks = <&clocks PCLK_WDT>;
-	clock-names = "watchdog";
-};
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
deleted file mode 100644
index 06f82c7e458e..000000000000
--- a/arch/arm/boot/dts/s3c24xx.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's S3C24XX family device tree source
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- */
-
-/ {
-	compatible = "samsung,s3c24xx";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		serial0 = &uart_0;
-		serial1 = &uart_1;
-		serial2 = &uart_2;
-	};
-
-	intc: interrupt-controller@4a000000 {
-		compatible = "samsung,s3c2410-irq";
-		reg = <0x4a000000 0x100>;
-		interrupt-controller;
-		#interrupt-cells = <4>;
-	};
-
-	pinctrl_0: pinctrl@56000000 {
-		reg = <0x56000000 0x1000>;
-
-		wakeup-interrupt-controller {
-			compatible = "samsung,s3c2410-wakeup-eint";
-			interrupts = <0 0 0 3>,
-				     <0 0 1 3>,
-				     <0 0 2 3>,
-				     <0 0 3 3>,
-				     <0 0 4 4>,
-				     <0 0 5 4>;
-		};
-	};
-
-	timer: pwm@51000000 {
-		compatible = "samsung,s3c2410-pwm";
-		reg = <0x51000000 0x1000>;
-		interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
-		#pwm-cells = <3>;
-	};
-
-	uart_0: serial@50000000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50000000 0x4000>;
-		interrupts = <1 28 0 4>, <1 28 1 4>;
-		status = "disabled";
-	};
-
-	uart_1: serial@50004000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50004000 0x4000>;
-		interrupts = <1 23 3 4>, <1 23 4 4>;
-		status = "disabled";
-	};
-
-	uart_2: serial@50008000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50008000 0x4000>;
-		interrupts = <1 15 6 4>, <1 15 7 4>;
-		status = "disabled";
-	};
-
-	watchdog: watchdog@53000000 {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x53000000 0x100>;
-		interrupts = <0 0 9 3>;
-		status = "disabled";
-	};
-
-	rtc: rtc@57000000 {
-		compatible = "samsung,s3c2410-rtc";
-		reg = <0x57000000 0x100>;
-		interrupts = <0 0 30 3>, <0 0 8 3>;
-		status = "disabled";
-	};
-
-	i2c: i2c@54000000 {
-		compatible = "samsung,s3c2410-i2c";
-		reg = <0x54000000 0x100>;
-		interrupts = <0 0 27 3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index 285555b9ed94..17097da36f5e 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -193,12 +193,12 @@
 };
 
 &pinctrl0 {
-	gpio_leds: gpio-leds {
+	gpio_leds: gpio-leds-pins {
 		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	gpio_keys: gpio-keys {
+	gpio_keys: gpio-keys-pins {
 		samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
 				"gpn-4", "gpn-5", "gpl-11", "gpl-12";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
index 8e9594d64b57..f53959b7d031 100644
--- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -9,118 +9,118 @@
  * listed as device tree nodes in this file.
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "s3c64xx-pinctrl.h"
 
 &pinctrl0 {
 	/*
 	 * Pin banks
 	 */
 
-	gpa: gpa {
+	gpa: gpa-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpc: gpc {
+	gpc: gpc-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpd: gpd {
+	gpd: gpd-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpe: gpe {
+	gpe: gpe-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpf: gpf {
+	gpf: gpf-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpg: gpg {
+	gpg: gpg-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gph: gph {
+	gph: gph-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpi: gpi {
+	gpi: gpi-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpj: gpj {
+	gpj: gpj-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpk: gpk {
+	gpk: gpk-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpl: gpl {
+	gpl: gpl-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpm: gpm {
+	gpm: gpm-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpn: gpn {
+	gpn: gpn-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpo: gpo {
+	gpo: gpo-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpp: gpp {
+	gpp: gpp-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpq: gpq {
+	gpq: gpq-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -131,552 +131,552 @@
 	 * Pin groups
 	 */
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa-0", "gpa-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa-2", "gpa-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa-4", "gpa-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa-6", "gpa-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	ext_dma_0: ext-dma-0 {
+	ext_dma_0: ext-dma-0-pins {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	ext_dma_1: ext-dma-1 {
+	ext_dma_1: ext-dma-1-pins {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	irda_data_0: irda-data-0 {
+	irda_data_0: irda-data-0-pins {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	irda_data_1: irda-data-1 {
+	irda_data_1: irda-data-1-pins {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	irda_sdbw: irda-sdbw {
+	irda_sdbw: irda-sdbw-pins {
 		samsung,pins = "gpb-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpb-5", "gpb-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		/* S3C6410-only */
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_6>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpc-0", "gpc-1", "gpc-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	spi0_cs: spi0-cs {
+	spi0_cs: spi0-cs-pins {
 		samsung,pins = "gpc-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpc-4", "gpc-5", "gpc-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	spi1_cs: spi1-cs {
+	spi1_cs: spi1-cs-pins {
 		samsung,pins = "gpc-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpg-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpg-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_bus1: sd0-bus1 {
+	sd0_bus1: sd0-bus1-pins {
 		samsung,pins = "gpg-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_bus4: sd0-bus4 {
+	sd0_bus4: sd0-bus4-pins {
 		samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpg-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gph-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gph-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_bus1: sd1-bus1 {
+	sd1_bus1: sd1-bus1-pins {
 		samsung,pins = "gph-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_bus4: sd1-bus4 {
+	sd1_bus4: sd1-bus4-pins {
 		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_bus8: sd1-bus8 {
+	sd1_bus8: sd1-bus8-pins {
 		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
 				"gph-6", "gph-7", "gph-8", "gph-9";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpg-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd2_bus1: sd2-bus1 {
+	sd2_bus1: sd2-bus1-pins {
 		samsung,pins = "gph-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd2_bus4: sd2-bus4 {
+	sd2_bus4: sd2-bus4-pins {
 		samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s0_cdclk: i2s0-cdclk {
+	i2s0_cdclk: i2s0-cdclk-pins {
 		samsung,pins = "gpd-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s1_cdclk: i2s1-cdclk {
+	i2s1_cdclk: i2s1-cdclk-pins {
 		samsung,pins = "gpe-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		/* S3C6410-only */
 		samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
 				"gph-8", "gph-9";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_5>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s2_cdclk: i2s2-cdclk {
+	i2s2_cdclk: i2s2-cdclk-pins {
 		/* S3C6410-only */
 		samsung,pins = "gph-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_5>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pcm0_bus: pcm0-bus {
+	pcm0_bus: pcm0-bus-pins {
 		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pcm0_extclk: pcm0-extclk {
+	pcm0_extclk: pcm0-extclk-pins {
 		samsung,pins = "gpd-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pcm1_extclk: pcm1-extclk {
+	pcm1_extclk: pcm1-extclk-pins {
 		samsung,pins = "gpe-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	ac97_bus_0: ac97-bus-0 {
+	ac97_bus_0: ac97-bus-0-pins {
 		samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	ac97_bus_1: ac97-bus-1 {
+	ac97_bus_1: ac97-bus-1-pins {
 		samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	cam_port: cam-port {
+	cam_port: cam-port-pins {
 		samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
 				"gpf-5", "gpf-6", "gpf-7", "gpf-8",
 				"gpf-9", "gpf-10", "gpf-11", "gpf-12";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	cam_rst: cam-rst {
+	cam_rst: cam-rst-pins {
 		samsung,pins = "gpf-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	cam_field: cam-field {
+	cam_field: cam-field-pins {
 		/* S3C6410-only */
 		samsung,pins = "gpb-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pwm_extclk: pwm-extclk {
+	pwm_extclk: pwm-extclk-pins {
 		samsung,pins = "gpf-13";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpf-14";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpf-15";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	clkout0: clkout-0 {
+	clkout0: clkout-0-pins {
 		samsung,pins = "gpf-14";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col0_0: keypad-col0-0 {
+	keypad_col0_0: keypad-col0-0-pins {
 		samsung,pins = "gph-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col1_0: keypad-col1-0 {
+	keypad_col1_0: keypad-col1-0-pins {
 		samsung,pins = "gph-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col2_0: keypad-col2-0 {
+	keypad_col2_0: keypad-col2-0-pins {
 		samsung,pins = "gph-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col3_0: keypad-col3-0 {
+	keypad_col3_0: keypad-col3-0-pins {
 		samsung,pins = "gph-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col4_0: keypad-col4-0 {
+	keypad_col4_0: keypad-col4-0-pins {
 		samsung,pins = "gph-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col5_0: keypad-col5-0 {
+	keypad_col5_0: keypad-col5-0-pins {
 		samsung,pins = "gph-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col6_0: keypad-col6-0 {
+	keypad_col6_0: keypad-col6-0-pins {
 		samsung,pins = "gph-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col7_0: keypad-col7-0 {
+	keypad_col7_0: keypad-col7-0-pins {
 		samsung,pins = "gph-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col0_1: keypad-col0-1 {
+	keypad_col0_1: keypad-col0-1-pins {
 		samsung,pins = "gpl-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col1_1: keypad-col1-1 {
+	keypad_col1_1: keypad-col1-1-pins {
 		samsung,pins = "gpl-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col2_1: keypad-col2-1 {
+	keypad_col2_1: keypad-col2-1-pins {
 		samsung,pins = "gpl-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col3_1: keypad-col3-1 {
+	keypad_col3_1: keypad-col3-1-pins {
 		samsung,pins = "gpl-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col4_1: keypad-col4-1 {
+	keypad_col4_1: keypad-col4-1-pins {
 		samsung,pins = "gpl-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col5_1: keypad-col5-1 {
+	keypad_col5_1: keypad-col5-1-pins {
 		samsung,pins = "gpl-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col6_1: keypad-col6-1 {
+	keypad_col6_1: keypad-col6-1-pins {
 		samsung,pins = "gpl-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col7_1: keypad-col7-1 {
+	keypad_col7_1: keypad-col7-1-pins {
 		samsung,pins = "gpl-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row0_0: keypad-row0-0 {
+	keypad_row0_0: keypad-row0-0-pins {
 		samsung,pins = "gpk-8";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row1_0: keypad-row1-0 {
+	keypad_row1_0: keypad-row1-0-pins {
 		samsung,pins = "gpk-9";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row2_0: keypad-row2-0 {
+	keypad_row2_0: keypad-row2-0-pins {
 		samsung,pins = "gpk-10";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row3_0: keypad-row3-0 {
+	keypad_row3_0: keypad-row3-0-pins {
 		samsung,pins = "gpk-11";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row4_0: keypad-row4-0 {
+	keypad_row4_0: keypad-row4-0-pins {
 		samsung,pins = "gpk-12";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row5_0: keypad-row5-0 {
+	keypad_row5_0: keypad-row5-0-pins {
 		samsung,pins = "gpk-13";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row6_0: keypad-row6-0 {
+	keypad_row6_0: keypad-row6-0-pins {
 		samsung,pins = "gpk-14";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row7_0: keypad-row7-0 {
+	keypad_row7_0: keypad-row7-0-pins {
 		samsung,pins = "gpk-15";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row0_1: keypad-row0-1 {
+	keypad_row0_1: keypad-row0-1-pins {
 		samsung,pins = "gpn-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row1_1: keypad-row1-1 {
+	keypad_row1_1: keypad-row1-1-pins {
 		samsung,pins = "gpn-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row2_1: keypad-row2-1 {
+	keypad_row2_1: keypad-row2-1-pins {
 		samsung,pins = "gpn-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row3_1: keypad-row3-1 {
+	keypad_row3_1: keypad-row3-1-pins {
 		samsung,pins = "gpn-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row4_1: keypad-row4-1 {
+	keypad_row4_1: keypad-row4-1-pins {
 		samsung,pins = "gpn-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row5_1: keypad-row5-1 {
+	keypad_row5_1: keypad-row5-1-pins {
 		samsung,pins = "gpn-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row6_1: keypad-row6-1 {
+	keypad_row6_1: keypad-row6-1-pins {
 		samsung,pins = "gpn-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row7_1: keypad-row7-1 {
+	keypad_row7_1: keypad-row7-1-pins {
 		samsung,pins = "gpn-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	lcd_ctrl: lcd-ctrl {
+	lcd_ctrl: lcd-ctrl-pins {
 		samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	lcd_data16: lcd-data-width16 {
+	lcd_data16: lcd-data-width16-pins {
 		samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6",
 				"gpi-7", "gpi-10", "gpi-11", "gpi-12",
 				"gpi-13", "gpi-14", "gpi-15", "gpj-3",
 				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	lcd_data18: lcd-data-width18 {
+	lcd_data18: lcd-data-width18-pins {
 		samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5",
 				"gpi-6", "gpi-7", "gpi-10", "gpi-11",
 				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
 				"gpj-2", "gpj-3", "gpj-4", "gpj-5",
 				"gpj-6", "gpj-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	lcd_data24: lcd-data-width24 {
+	lcd_data24: lcd-data-width24-pins {
 		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
 				"gpi-4", "gpi-5", "gpi-6", "gpi-7",
 				"gpi-8", "gpi-9", "gpi-10", "gpi-11",
 				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
 				"gpj-0", "gpj-1", "gpj-2", "gpj-3",
 				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	hsi_bus: hsi-bus {
+	hsi_bus: hsi-bus-pins {
 		samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
 				"gpk-4", "gpk-5", "gpk-6", "gpk-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-function = <S3C64XX_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 };
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.h b/arch/arm/boot/dts/s3c64xx-pinctrl.h
new file mode 100644
index 000000000000..645c591db357
--- /dev/null
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Samsung S3C64xx DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM_SAMSUNG_S3C64XX_PINCTRL_H__
+#define __DTS_ARM_SAMSUNG_S3C64XX_PINCTRL_H__
+
+#define S3C64XX_PIN_PULL_NONE		0
+#define S3C64XX_PIN_PULL_DOWN		1
+#define S3C64XX_PIN_PULL_UP		2
+
+#define S3C64XX_PIN_FUNC_INPUT		0
+#define S3C64XX_PIN_FUNC_OUTPUT		1
+#define S3C64XX_PIN_FUNC_2		2
+#define S3C64XX_PIN_FUNC_3		3
+#define S3C64XX_PIN_FUNC_4		4
+#define S3C64XX_PIN_FUNC_5		5
+#define S3C64XX_PIN_FUNC_6		6
+#define S3C64XX_PIN_FUNC_EINT		7
+
+#endif /* __DTS_ARM_SAMSUNG_S3C64XX_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
index cb11a87dbc42..c03df6355500 100644
--- a/arch/arm/boot/dts/s3c64xx.dtsi
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -59,7 +59,7 @@
 			#interrupt-cells = <1>;
 		};
 
-		sdhci0: sdhci@7c200000 {
+		sdhci0: mmc@7c200000 {
 			compatible = "samsung,s3c6410-sdhci";
 			reg = <0x7c200000 0x100>;
 			interrupt-parent = <&vic1>;
@@ -70,7 +70,7 @@
 			status = "disabled";
 		};
 
-		sdhci1: sdhci@7c300000 {
+		sdhci1: mmc@7c300000 {
 			compatible = "samsung,s3c6410-sdhci";
 			reg = <0x7c300000 0x100>;
 			interrupt-parent = <&vic1>;
@@ -81,7 +81,7 @@
 			status = "disabled";
 		};
 
-		sdhci2: sdhci@7c400000 {
+		sdhci2: mmc@7c400000 {
 			compatible = "samsung,s3c6410-sdhci";
 			reg = <0x7c400000 0x100>;
 			interrupt-parent = <&vic1>;
@@ -178,20 +178,12 @@
 			interrupt-parent = <&vic1>;
 			interrupts = <21>;
 
-			pctrl_int_map: pinctrl-interrupt-map {
-				interrupt-map = <0 &vic0 0>,
-						<1 &vic0 1>,
-						<2 &vic1 0>,
-						<3 &vic1 1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-			};
-
 			wakeup-interrupt-controller {
 				compatible = "samsung,s3c64xx-wakeup-eint";
-				interrupts = <0>, <1>, <2>, <3>;
-				interrupt-parent = <&pctrl_int_map>;
+				interrupts-extended = <&vic0 0>,
+						      <&vic0 1>,
+						      <&vic1 0>,
+						      <&vic1 1>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
index 6423348034b6..0f5c6cd0f3a1 100644
--- a/arch/arm/boot/dts/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -29,8 +29,7 @@
 
 	memory@30000000 {
 		device_type = "memory";
-		reg = <0x30000000 0x05000000
-			0x40000000 0x18000000>;
+		reg = <0x30000000 0x05000000>, <0x40000000 0x18000000>;
 	};
 
 	pmic_ap_clk: clock-0 {
@@ -391,9 +390,9 @@
 };
 
 &pinctrl0 {
-	t_flash_detect: t-flash-detect {
+	t_flash_detect: t-flash-detect-pins {
 		samsung,pins = "gph3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 	};
 };
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 160f8cd9a68d..f628d3660493 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -24,9 +24,9 @@
 
 	memory@30000000 {
 		device_type = "memory";
-		reg = <0x30000000 0x05000000
-			0x40000000 0x10000000
-			0x50000000 0x08000000>;
+		reg = <0x30000000 0x05000000>,
+			<0x40000000 0x10000000>,
+			<0x50000000 0x08000000>;
 	};
 
 	reserved-memory {
@@ -135,8 +135,8 @@
 					0xa101 0x0100 0x8100 0x0100 0x0100
 					0x0100>;
 
-			wlf,ldo1ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
-			wlf,ldo2ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
+			wlf,ldo1ena-gpios = <&gpf3 4 GPIO_ACTIVE_HIGH>;
+			wlf,ldo2ena-gpios = <&gpf3 4 GPIO_ACTIVE_HIGH>;
 
 			wlf,lineout1-se;
 			wlf,lineout2-se;
@@ -564,7 +564,6 @@
 			reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>;
 			vdd3-supply = <&ldo7_reg>;
 			vci-supply = <&ldo17_reg>;
-			spi-cs-high;
 			spi-max-frequency = <1200000>;
 
 			pinctrl-names = "default";
@@ -636,7 +635,7 @@
 };
 
 &i2s0 {
-	dmas = <&pdma0 9>, <&pdma0 10>, <&pdma0 11>;
+	dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>;
 	status = "okay";
 };
 
@@ -645,185 +644,185 @@
 };
 
 &pinctrl0 {
-	bt_reset: bt-reset {
+	bt_reset: bt-reset-pins {
 		samsung,pins = "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	wlan_bt_en: wlan-bt-en {
+	wlan_bt_en: wlan-bt-en-pins {
 		samsung,pins = "gpb-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 		samsung,pin-val = <1>;
 	};
 
-	codec_ldo: codec-ldo {
+	codec_ldo: codec-ldo-pins {
 		samsung,pins = "gpf3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 	};
 
 	prox_i2c_pins: gp2a-i2c-pins {
 		samsung,pins = "gpg0-2", "gpg2-2";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	wlan_gpio_rst: wlan-gpio-rst {
+	wlan_gpio_rst: wlan-gpio-rst-pins {
 		samsung,pins = "gpg1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 	};
 
-	bt_wake: bt-wake {
+	bt_wake: bt-wake-pins {
 		samsung,pins = "gpg3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 	};
 
-	gp2a_irq: gp2a-irq {
+	gp2a_irq: gp2a-irq-pins {
 		samsung,pins = "gph0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_pins: pmic-dvs-pins {
 		samsung,pins = "gph0-3", "gph0-4", "gph0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 		samsung,pin-val = <0>;
 	};
 
-	pmic_irq: pmic-irq {
+	pmic_irq: pmic-irq-pins {
 		samsung,pins = "gph0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	wifi_host_wake: wifi-host-wake {
+	wifi_host_wake: wifi-host-wake-pins {
 		samsung,pins = "gph2-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	bt_host_wake: bt-host-wake {
+	bt_host_wake: bt-host-wake-pins {
 		samsung,pins = "gph2-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	musb_irq: musq-irq {
+	musb_irq: musq-irq-pins {
 		samsung,pins = "gph2-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	tf_detect: tf-detect {
+	tf_detect: tf-detect-pins {
 		samsung,pins = "gph3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	wifi_wake: wifi-wake {
+	wifi_wake: wifi-wake-pins {
 		samsung,pins = "gph3-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 	};
 
 	magnetometer_i2c_pins: yas529-i2c-pins {
 		samsung,pins = "gpj0-0", "gpj0-1";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	ts_irq: ts-irq {
+	ts_irq: ts-irq-pins {
 		samsung,pins = "gpj0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	vibrator_ena: vibrator-ena {
+	vibrator_ena: vibrator-ena-pins {
 		samsung,pins = "gpj1-1";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	gp2a_power: gp2a-power {
+	gp2a_power: gp2a-power-pins {
 		samsung,pins = "gpj1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	touchkey_i2c_pins: touchkey-i2c-pins {
 		samsung,pins = "gpj3-0", "gpj3-1";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	touchkey_vdd_ena: touchkey-vdd-ena {
+	touchkey_vdd_ena: touchkey-vdd-ena-pins {
 		samsung,pins = "gpj3-2";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	musb_i2c_pins: musb-i2c-pins {
 		samsung,pins = "gpj3-4", "gpj3-5";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	accel_i2c_pins: accel-i2c-pins {
 		samsung,pins = "gpj3-6", "gpj3-7";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	pmic_i2c_pins: pmic-i2c-pins {
 		samsung,pins = "gpj4-0", "gpj4-3";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	touchkey_irq: touchkey-irq {
+	touchkey_irq: touchkey-irq-pins {
 		samsung,pins = "gpj4-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	lcd_spi_pins: spi-lcd-pins {
 		samsung,pins = "mp01-1", "mp04-1", "mp04-3";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	fg_i2c_pins: fg-i2c-pins {
 		samsung,pins = "mp05-0", "mp05-1";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	sound_i2c_pins: sound-i2c-pins {
 		samsung,pins = "mp05-2", "mp05-3";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	panel_rst: panel-rst {
+	panel_rst: panel-rst-pins {
 		samsung,pins = "mp05-5";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 };
 
@@ -895,7 +894,7 @@
 		device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
 		interrupt-parent = <&gph2>;
 		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "host-wake";
+		interrupt-names = "host-wakeup";
 	};
 };
 
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index ca064359dd30..eaa7c4f0e257 100644
--- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -8,6 +8,7 @@
 / {
 	model = "Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210";
 	compatible = "samsung,fascinate4g", "samsung,aries", "samsung,s5pv210";
+	chassis-type = "handset";
 
 	chosen {
 		stdout-path = &uart2;
@@ -16,20 +17,20 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "power";
 			gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		vol-down {
+		key-vol-down {
 			label = "volume_down";
 			gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		vol-up {
+		key-vol-up {
 			label = "volume_up";
 			gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
@@ -115,7 +116,7 @@
 	compatible = "maxim,max77836-battery";
 
 	interrupt-parent = <&gph3>;
-	interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&fg_irq>;
@@ -125,39 +126,39 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep_cfg>;
 
-	headset_det: headset-det {
+	headset_det: headset-det-pins {
 		samsung,pins = "gph0-6", "gph3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 	};
 
-	fg_irq: fg-irq {
+	fg_irq: fg-irq-pins {
 		samsung,pins = "gph3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	headset_micbias_ena: headset-micbias-ena {
+	headset_micbias_ena: headset-micbias-ena-pins {
 		samsung,pins = "gpj2-5";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	earpath_sel: earpath-sel {
+	earpath_sel: earpath-sel-pins {
 		samsung,pins = "gpj2-6";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	main_micbias_ena: main-micbias-ena {
+	main_micbias_ena: main-micbias-ena-pins {
 		samsung,pins = "gpj4-2";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	/* Based on vendor kernel v2.6.35.7 */
-	sleep_cfg: sleep-cfg {
+	sleep_cfg: sleep-state {
 		PIN_SLP(gpa0-0, PREV, NONE);
 		PIN_SLP(gpa0-1, PREV, NONE);
 		PIN_SLP(gpa0-2, PREV, NONE);
diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
index 560f830b6f6b..532d3f5bceb1 100644
--- a/arch/arm/boot/dts/s5pv210-galaxys.dts
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -8,6 +8,7 @@
 / {
 	model = "Samsung Galaxy S1 (GT-I9000) based on S5PV210";
 	compatible = "samsung,galaxys", "samsung,aries", "samsung,s5pv210";
+	chassis-type = "handset";
 
 	chosen {
 		stdout-path = &uart2;
@@ -23,26 +24,26 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "power";
 			gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		vol-down {
+		key-vol-down {
 			label = "volume_down";
 			gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		vol-up {
+		key-vol-up {
 			label = "volume_up";
 			gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		home {
+		key-home {
 			label = "home";
 			gpios = <&gph3 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
@@ -151,51 +152,51 @@
 
 	fm_i2c_pins: fm-i2c-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	headset_det: headset-det {
+	headset_det: headset-det-pins {
 		samsung,pins = "gph0-6", "gph3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
 	};
 
-	fm_irq: fm-irq {
+	fm_irq: fm-irq-pins {
 		samsung,pins = "gpj2-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	fm_rst: fm-rst {
+	fm_rst: fm-rst-pins {
 		samsung,pins = "gpj2-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	earpath_sel: earpath-sel {
+	earpath_sel: earpath-sel-pins {
 		samsung,pins = "gpj2-6";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	massmemory_en: massmemory-en {
+	massmemory_en: massmemory-en-pins {
 		samsung,pins = "gpj2-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	micbias_reg_ena: micbias-reg-ena {
+	micbias_reg_ena: micbias-reg-ena-pins {
 		samsung,pins = "gpj4-2";
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
 	/* Based on CyanogenMod 3.0.101 kernel */
-	sleep_cfg: sleep-cfg {
+	sleep_cfg: sleep-state {
 		PIN_SLP(gpa0-0, PREV, NONE);
 		PIN_SLP(gpa0-1, PREV, NONE);
 		PIN_SLP(gpa0-2, PREV, NONE);
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
index 5c1e12d39747..d32f42dd1bf5 100644
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -30,9 +30,9 @@
 
 	memory@30000000 {
 		device_type = "memory";
-		reg = <0x30000000 0x05000000
-			0x40000000 0x10000000
-			0x50000000 0x08000000>;
+		reg = <0x30000000 0x05000000>,
+			<0x40000000 0x10000000>,
+			<0x50000000 0x08000000>;
 	};
 
 	pmic_ap_clk: clock-0 {
@@ -358,15 +358,6 @@
 		reg = <0x4a>;
 		interrupt-parent = <&gpj0>;
 		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-
-		atmel,x-line = <17>;
-		atmel,y-line = <11>;
-		atmel,x-size = <800>;
-		atmel,y-size = <480>;
-		atmel,burst-length = <0x21>;
-		atmel,threshold = <0x28>;
-		atmel,orientation = <1>;
-
 		vdd-supply = <&tsp_reg>;
 	};
 };
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
index b8c5172c31dd..6d6daef9fb7a 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -16,17 +16,17 @@
  * nodes can be added to this file.
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "s5pv210-pinctrl.h"
 
 #define PIN_SLP(_pin, _mode, _pull)					\
 	_pin {								\
 		samsung,pins = #_pin;					\
-		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
-		samsung,pin-pud-pdn = <S3C64XX_PIN_PULL_ ##_pull>;	\
+		samsung,pin-con-pdn = <S5PV210_PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <S5PV210_PIN_PULL_ ##_pull>;	\
 	}
 
 &pinctrl0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -34,7 +34,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -42,7 +42,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -50,7 +50,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -58,7 +58,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -66,7 +66,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -74,7 +74,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -82,7 +82,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -90,7 +90,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -98,7 +98,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -106,7 +106,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -114,7 +114,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf2: gpf2 {
+	gpf2: gpf2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -122,7 +122,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf3: gpf3 {
+	gpf3: gpf3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -130,7 +130,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -138,7 +138,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -146,7 +146,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -154,7 +154,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg3: gpg3 {
+	gpg3: gpg3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -162,7 +162,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj0: gpj0 {
+	gpj0: gpj0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -170,7 +170,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj1: gpj1 {
+	gpj1: gpj1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -178,7 +178,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj2: gpj2 {
+	gpj2: gpj2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -186,7 +186,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj3: gpj3 {
+	gpj3: gpj3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -194,7 +194,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj4: gpj4 {
+	gpj4: gpj4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -202,47 +202,47 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpi: gpi {
+	gpi: gpi-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp01: mp01 {
+	mp01: mp01-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp02: mp02 {
+	mp02: mp02-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp03: mp03 {
+	mp03: mp03-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp04: mp04 {
+	mp04: mp04-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp05: mp05 {
+	mp05: mp05-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp06: mp06 {
+	mp06: mp06-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp07: mp07 {
+	mp07: mp07-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gph0: gph0 {
+	gph0: gph0-gpio-bank {
 		gpio-controller;
 		interrupt-controller;
 		interrupt-parent = <&vic0>;
@@ -252,7 +252,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph1: gph1 {
+	gph1: gph1-gpio-bank {
 		gpio-controller;
 		interrupt-controller;
 		interrupt-parent = <&vic0>;
@@ -262,7 +262,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph2: gph2 {
+	gph2: gph2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -270,7 +270,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph3: gph3 {
+	gph3: gph3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -278,572 +278,572 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	uart_audio: uart-audio {
+	uart_audio: uart-audio-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_4>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
 				"gpi-4", "gpi-5", "gpi-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_4>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	ac97_bus: ac97-bus {
+	ac97_bus: ac97-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_4>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	spdif_bus: spdif-bus {
+	spdif_bus: spdif-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_4>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_5>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpd1-4", "gpd1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpd0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpd0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_row0: keypad-row-0 {
+	keypad_row0: keypad-row-0-pins {
 		samsung,pins = "gph3-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_row1: keypad-row-1 {
+	keypad_row1: keypad-row-1-pins {
 		samsung,pins = "gph3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_row2: keypad-row-2 {
+	keypad_row2: keypad-row-2-pins {
 		samsung,pins = "gph3-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_row3: keypad-row-3 {
+	keypad_row3: keypad-row-3-pins {
 		samsung,pins = "gph3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_row4: keypad-row-4 {
+	keypad_row4: keypad-row-4-pins {
 		samsung,pins = "gph3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_row5: keypad-row-5 {
+	keypad_row5: keypad-row-5-pins {
 		samsung,pins = "gph3-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_row6: keypad-row-6 {
+	keypad_row6: keypad-row-6-pins {
 		samsung,pins = "gph3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_row7: keypad-row-7 {
+	keypad_row7: keypad-row-7-pins {
 		samsung,pins = "gph3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_col0: keypad-col-0 {
+	keypad_col0: keypad-col-0-pins {
 		samsung,pins = "gph2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_col1: keypad-col-1 {
+	keypad_col1: keypad-col-1-pins {
 		samsung,pins = "gph2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_col2: keypad-col-2 {
+	keypad_col2: keypad-col-2-pins {
 		samsung,pins = "gph2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_col3: keypad-col-3 {
+	keypad_col3: keypad-col-3-pins {
 		samsung,pins = "gph2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_col4: keypad-col-4 {
+	keypad_col4: keypad-col-4-pins {
 		samsung,pins = "gph2-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_col5: keypad-col-5 {
+	keypad_col5: keypad-col-5-pins {
 		samsung,pins = "gph2-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_col6: keypad-col-6 {
+	keypad_col6: keypad-col-6-pins {
 		samsung,pins = "gph2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	keypad_col7: keypad-col-7 {
+	keypad_col7: keypad-col-7-pins {
 		samsung,pins = "gph2-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpg0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpg0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpg0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpg0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpg1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpg1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpg1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpg1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpg2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpg2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpg2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpg2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd2_bus8: sd2-bus-width8 {
+	sd2_bus8: sd2-bus-width8-pins {
 		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd3_clk: sd3-clk {
+	sd3_clk: sd3-clk-pins {
 		samsung,pins = "gpg3-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd3_cmd: sd3-cmd {
+	sd3_cmd: sd3-cmd-pins {
 		samsung,pins = "gpg3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd3_cd: sd3-cd {
+	sd3_cd: sd3-cd-pins {
 		samsung,pins = "gpg3-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd3_bus1: sd3-bus-width1 {
+	sd3_bus1: sd3-bus-width1-pins {
 		samsung,pins = "gpg3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	sd3_bus4: sd3-bus-width4 {
+	sd3_bus4: sd3-bus-width4-pins {
 		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	eint0: ext-int0 {
+	eint0: ext-int0-pins {
 		samsung,pins = "gph0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	eint8: ext-int8 {
+	eint8: ext-int8-pins {
 		samsung,pins = "gph1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	eint15: ext-int15 {
+	eint15: ext-int15-pins {
 		samsung,pins = "gph1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	eint16: ext-int16 {
+	eint16: ext-int16-pins {
 		samsung,pins = "gph2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	eint31: ext-int31 {
+	eint31: ext-int31-pins {
 		samsung,pins = "gph3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_io: cam-port-a-io {
+	cam_port_a_io: cam-port-a-io-pins {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 				"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 				"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_clk_active: cam-port-a-clk-active {
+	cam_port_a_clk_active: cam-port-a-clk-active-pins {
 		samsung,pins = "gpe1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	cam_port_a_clk_idle: cam-port-a-clk-idle {
+	cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
 		samsung,pins = "gpe1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	cam_port_b_io: cam-port-b-io {
+	cam_port_b_io: cam-port-b-io-pins {
 		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	cam_port_b_clk_active: cam-port-b-clk-active {
+	cam_port_b_clk_active: cam-port-b-clk-active-pins {
 		samsung,pins = "gpj1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
+	cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
 		samsung,pins = "gpj1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-		lcd_ctrl: lcd-ctrl {
+	lcd_ctrl: lcd-ctrl-pins {
 		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_3>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	lcd_sync: lcd-sync {
+	lcd_sync: lcd-sync-pins {
 		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	lcd_clk: lcd-clk {
+	lcd_clk: lcd-clk-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 
-	lcd_data24: lcd-data-width24 {
+	lcd_data24: lcd-data-width24-pins {
 		samsung,pins =  "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
 				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
 				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
 				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
 				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-function = <S5PV210_PIN_FUNC_2>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.h b/arch/arm/boot/dts/s5pv210-pinctrl.h
new file mode 100644
index 000000000000..29bdf376d8f1
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Samsung S5PV210 DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM_SAMSUNG_S5PV210_PINCTRL_H__
+#define __DTS_ARM_SAMSUNG_S5PV210_PINCTRL_H__
+
+#define S5PV210_PIN_PULL_NONE		0
+#define S5PV210_PIN_PULL_DOWN		1
+#define S5PV210_PIN_PULL_UP		2
+
+/* Pin function in power down mode */
+#define S5PV210_PIN_PDN_OUT0		0
+#define S5PV210_PIN_PDN_OUT1		1
+#define S5PV210_PIN_PDN_INPUT		2
+#define S5PV210_PIN_PDN_PREV		3
+
+#define S5PV210_PIN_DRV_LV1		0
+#define S5PV210_PIN_DRV_LV2		2
+#define S5PV210_PIN_DRV_LV3		1
+#define S5PV210_PIN_DRV_LV4		3
+
+#define S5PV210_PIN_FUNC_INPUT		0
+#define S5PV210_PIN_FUNC_OUTPUT		1
+#define S5PV210_PIN_FUNC_2		2
+#define S5PV210_PIN_FUNC_3		3
+#define S5PV210_PIN_FUNC_4		4
+#define S5PV210_PIN_FUNC_5		5
+#define S5PV210_PIN_FUNC_6		6
+#define S5PV210_PIN_FUNC_EINT		0xf
+#define S5PV210_PIN_FUNC_F		S5PV210_PIN_FUNC_EINT
+
+#endif /* __DTS_ARM_SAMSUNG_S5PV210_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 353ba7b09a0c..1a9e4a96b2ff 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -117,7 +117,7 @@
 			};
 		};
 
-		pdma0: dma@e0900000 {
+		pdma0: dma-controller@e0900000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0xe0900000 0x1000>;
 			interrupt-parent = <&vic0>;
@@ -125,11 +125,9 @@
 			clocks = <&clocks CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		pdma1: dma@e0a00000 {
+		pdma1: dma-controller@e0a00000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0xe0a00000 0x1000>;
 			interrupt-parent = <&vic0>;
@@ -137,8 +135,6 @@
 			clocks = <&clocks CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
 		adc: adc@e1700000 {
@@ -239,8 +235,8 @@
 			reg = <0xeee30000 0x1000>;
 			interrupt-parent = <&vic2>;
 			interrupts = <16>;
-			dma-names = "rx", "tx", "tx-sec";
-			dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+			dma-names = "tx", "rx", "tx-sec";
+			dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 11>;
 			clock-names = "iis",
 				      "i2s_opclk0",
 				      "i2s_opclk1";
@@ -259,8 +255,8 @@
 			reg = <0xe2100000 0x1000>;
 			interrupt-parent = <&vic2>;
 			interrupts = <17>;
-			dma-names = "rx", "tx";
-			dmas = <&pdma1 12>, <&pdma1 13>;
+			dma-names = "tx", "rx";
+			dmas = <&pdma1 13>, <&pdma1 12>;
 			clock-names = "iis", "i2s_opclk0";
 			clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>;
 			pinctrl-names = "default";
@@ -274,8 +270,8 @@
 			reg = <0xe2a00000 0x1000>;
 			interrupt-parent = <&vic2>;
 			interrupts = <18>;
-			dma-names = "rx", "tx";
-			dmas = <&pdma1 14>, <&pdma1 15>;
+			dma-names = "tx", "rx";
+			dmas = <&pdma1 15>, <&pdma1 14>;
 			clock-names = "iis", "i2s_opclk0";
 			clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>;
 			pinctrl-names = "default";
@@ -361,7 +357,7 @@
 			status = "disabled";
 		};
 
-		sdhci0: sdhci@eb000000 {
+		sdhci0: mmc@eb000000 {
 			compatible = "samsung,s3c6410-sdhci";
 			reg = <0xeb000000 0x100000>;
 			interrupt-parent = <&vic1>;
@@ -372,7 +368,7 @@
 			status = "disabled";
 		};
 
-		sdhci1: sdhci@eb100000 {
+		sdhci1: mmc@eb100000 {
 			compatible = "samsung,s3c6410-sdhci";
 			reg = <0xeb100000 0x100000>;
 			interrupt-parent = <&vic1>;
@@ -383,7 +379,7 @@
 			status = "disabled";
 		};
 
-		sdhci2: sdhci@eb200000 {
+		sdhci2: mmc@eb200000 {
 			compatible = "samsung,s3c6410-sdhci";
 			reg = <0xeb200000 0x100000>;
 			interrupt-parent = <&vic1>;
@@ -394,7 +390,7 @@
 			status = "disabled";
 		};
 
-		sdhci3: sdhci@eb300000 {
+		sdhci3: mmc@eb300000 {
 			compatible = "samsung,s3c6410-sdhci";
 			reg = <0xeb300000 0x100000>;
 			interrupt-parent = <&vic3>;
@@ -427,38 +423,28 @@
 			status = "disabled";
 		};
 
-		ehci: ehci@ec200000 {
+		ehci: usb@ec200000 {
 			compatible = "samsung,exynos4210-ehci";
 			reg = <0xec200000 0x100>;
 			interrupts = <23>;
 			interrupt-parent = <&vic1>;
 			clocks = <&clocks CLK_USB_HOST>;
 			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
+			phys = <&usbphy 1>;
+			phy-names = "host";
 			status = "disabled";
-
-			port@0 {
-				reg = <0>;
-				phys = <&usbphy 1>;
-			};
 		};
 
-		ohci: ohci@ec300000 {
+		ohci: usb@ec300000 {
 			compatible = "samsung,exynos4210-ohci";
 			reg = <0xec300000 0x100>;
 			interrupts = <23>;
 			interrupt-parent = <&vic1>;
 			clocks = <&clocks CLK_USB_HOST>;
 			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
+			phys = <&usbphy 1>;
+			phy-names = "host";
 			status = "disabled";
-
-			port@0 {
-				reg = <0>;
-				phys = <&usbphy 1>;
-			};
 		};
 
 		mfc: codec@f1700000 {
@@ -528,7 +514,7 @@
 			clock-names = "sclk_fimg2d", "fimg2d";
 		};
 
-		mdma1: mdma@fa200000 {
+		mdma1: dma-controller@fa200000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0xfa200000 0x1000>;
 			interrupt-parent = <&vic0>;
@@ -536,8 +522,6 @@
 			clocks = <&clocks CLK_MDMA>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 		};
 
 		rotator: rotator@fa300000 {
@@ -582,7 +566,7 @@
 				interrupts = <29>;
 				clocks = <&clocks CLK_CSIS>,
 						<&clocks SCLK_CSIS>;
-				clock-names = "clk_csis",
+				clock-names = "csis",
 						"sclk_csis";
 				bus-width = <4>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
index 84066c1298df..e67ede940071 100644
--- a/arch/arm/boot/dts/sam9x60.dtsi
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
 
 / {
@@ -169,6 +170,64 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xf0000000 0x800>;
 				status = "disabled";
+
+				uart4: serial@200 {
+					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi4: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c4: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			flx5: flexcom@f0004000 {
@@ -179,6 +238,65 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xf0004000 0x800>;
 				status = "disabled";
+
+				uart5: serial@200 {
+					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi5: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c5: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(10))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			dma0: dma-controller@f0008000 {
@@ -250,6 +368,45 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xf0020000 0x800>;
 				status = "disabled";
+
+				uart11: serial@200 {
+					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(22))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(23))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c11: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(22))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(23))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			flx12: flexcom@f0024000 {
@@ -260,6 +417,45 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xf0024000 0x800>;
 				status = "disabled";
+
+				uart12: serial@200 {
+					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(24))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(25))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c12: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(24))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(25))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			pit64b: timer@f0028000 {
@@ -270,7 +466,7 @@
 				clock-names = "pclk", "gclk";
 			};
 
-			sha: sha@f002c000 {
+			sha: crypto@f002c000 {
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xf002c000 0x100>;
 				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -280,7 +476,6 @@
 				dma-names = "tx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 				clock-names = "sha_clk";
-				status = "okay";
 			};
 
 			trng: trng@f0030000 {
@@ -288,10 +483,9 @@
 				reg = <0xf0030000 0x100>;
 				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
-				status = "okay";
 			};
 
-			aes: aes@f0034000 {
+			aes: crypto@f0034000 {
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xf0034000 0x100>;
 				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -304,10 +498,9 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 				clock-names = "aes_clk";
-				status = "okay";
 			};
 
-			tdes: tdes@f0038000 {
+			tdes: crypto@f0038000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xf0038000 0x100>;
 				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -320,7 +513,6 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
 				clock-names = "tdes_clk";
-				status = "okay";
 			};
 
 			classd: classd@f003c000 {
@@ -382,6 +574,45 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xf8010000 0x800>;
 				status = "disabled";
+
+				uart6: serial@200 {
+					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c6: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			flx7: flexcom@f8014000 {
@@ -392,6 +623,45 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xf8014000 0x800>;
 				status = "disabled";
+
+				uart7: serial@200 {
+					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c7: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			flx8: flexcom@f8018000 {
@@ -402,6 +672,45 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xf8018000 0x800>;
 				status = "disabled";
+
+				uart8: serial@200 {
+					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c8: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			flx0: flexcom@f801c000 {
@@ -412,6 +721,64 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xf801c000 0x800>;
 				status = "disabled";
+
+				uart0: serial@200 {
+					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi0: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c0: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			flx1: flexcom@f8020000 {
@@ -422,6 +789,64 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xf8020000 0x800>;
 				status = "disabled";
+
+				uart1: serial@200 {
+					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi1: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c1: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(2))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(3))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			flx2: flexcom@f8024000 {
@@ -432,6 +857,64 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xf8024000 0x800>;
 				status = "disabled";
+
+				uart2: serial@200 {
+					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi2: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c2: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(4))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(5))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			flx3: flexcom@f8028000 {
@@ -442,6 +925,64 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xf8028000 0x800>;
 				status = "disabled";
+
+				uart3: serial@200 {
+					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				spi3: spi@400 {
+					compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c3: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(6))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(7))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			macb0: ethernet@f802c000 {
@@ -468,7 +1009,7 @@
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 				#pwm-cells = <3>;
-				status="disabled";
+				status = "disabled";
 			};
 
 			hlcdc: hlcdc@f8038000 {
@@ -507,6 +1048,45 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xf8040000 0x800>;
 				status = "disabled";
+
+				uart9: serial@200 {
+					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c9: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			flx10: flexcom@f8044000 {
@@ -517,6 +1097,45 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xf8044000 0x800>;
 				status = "disabled";
+
+				uart10: serial@200 {
+					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(21))>;
+					dma-names = "tx", "rx";
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+					clock-names = "usart";
+					atmel,use-dma-rx;
+					atmel,use-dma-tx;
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c10: i2c@600 {
+					compatible = "microchip,sam9x60-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(21))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			isi: isi@f8048000 {
@@ -567,7 +1186,7 @@
 			mpddrc: mpddrc@ffffe800 {
 				compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
 				reg = <0xffffe800 0x200>;
-				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
 				clock-names = "ddrck", "mpddr";
 			};
 
@@ -587,6 +1206,7 @@
 			dbgu: serial@fffff200 {
 				compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -606,6 +1226,15 @@
 				compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
 				ranges = <0xfffff400 0xfffff400 0x800>;
 
+				/* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */
+				atmel,mux-mask = <
+						 /*	A	B	C	*/
+						 0xffffffff 0xffe03fff 0xef00019d	/* pioA */
+						 0x03ffffff 0x02fc7e7f 0x00780000	/* pioB */
+						 0xffffffff 0xffffffff 0xf83fffff	/* pioC */
+						 0x003fffff 0x003f8000 0x00000000	/* pioD */
+						 >;
+
 				pioA: gpio@fffff400 {
 					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -662,7 +1291,7 @@
 				clock-names = "td_slck", "md_slck", "main_xtal";
 			};
 
-			reset_controller: rstc@fffffe00 {
+			reset_controller: reset-controller@fffffe00 {
 				compatible = "microchip,sam9x60-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k 0>;
@@ -679,7 +1308,7 @@
 				status = "disabled";
 			};
 
-			rtt: rtt@fffffe20 {
+			rtt: rtc@fffffe20 {
 				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
 				reg = <0xfffffe20 0x20>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 2c4952427296..14c35c12a115 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 #include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
 
 / {
@@ -40,7 +41,7 @@
 		interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>;
 	};
 
-	etb {
+	etb@740000 {
 		compatible = "arm,coresight-etb10", "arm,primecell";
 		reg = <0x740000 0x1000>;
 
@@ -56,9 +57,9 @@
 		};
 	};
 
-	etm {
+	etm@73c000 {
 		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0x73C000 0x1000>;
+		reg = <0x73c000 0x1000>;
 
 		clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 		clock-names = "apb_pclk";
@@ -99,6 +100,16 @@
 		ranges = <0 0x00200000 0x20000>;
 	};
 
+	resistive_touch: resistive-touch {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+			      <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+			      <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+		io-channel-names = "x", "y", "pressure";
+		touchscreen-min-pressure = <50000>;
+		status = "disabled";
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -288,6 +299,7 @@
 				reg-names = "qspi_base", "qspi_mmap";
 				interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+				clock-names = "pclk";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -299,12 +311,13 @@
 				reg-names = "qspi_base", "qspi_mmap";
 				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
+				clock-names = "pclk";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
 			};
 
-			sha@f0028000 {
+			sha: crypto@f0028000 {
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xf0028000 0x100>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -314,10 +327,9 @@
 				dma-names = "tx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "sha_clk";
-				status = "okay";
 			};
 
-			aes@f002c000 {
+			aes: crypto@f002c000 {
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xf002c000 0x100>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -330,7 +342,6 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				clock-names = "aes_clk";
-				status = "okay";
 			};
 
 			spi0: spi@f8000000 {
@@ -374,8 +385,6 @@
 				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3		/* Queue 0 */
 					      66 IRQ_TYPE_LEVEL_HIGH 3          /* Queue 1 */
 					      67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
-				#address-cells = <1>;
-				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
@@ -413,7 +422,7 @@
 				pmecc: ecc-engine@f8014070 {
 					compatible = "atmel,sama5d2-pmecc";
 					reg = <0xf8014070 0x490>,
-					      <0xf8014500 0x100>;
+					      <0xf8014500 0x200>;
 				};
 			};
 
@@ -433,6 +442,7 @@
 			uart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -449,6 +459,7 @@
 			uart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -465,6 +476,7 @@
 			uart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -522,6 +534,7 @@
 				uart5: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
 					clock-names = "usart";
@@ -592,6 +605,7 @@
 				uart6: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 					clock-names = "usart";
@@ -660,7 +674,7 @@
 				ranges = <0 0xf8044000 0x1420>;
 			};
 
-			reset_controller: rstc@f8048000 {
+			reset_controller: reset-controller@f8048000 {
 				compatible = "atmel,sama5d3-rstc";
 				reg = <0xf8048000 0x10>;
 				clocks = <&clk32k>;
@@ -761,6 +775,7 @@
 			uart3: serial@fc008000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc008000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma1
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
@@ -777,6 +792,7 @@
 			uart4: serial@fc00c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc00c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
 					 AT91_XDMAC_DT_PERID(43))>,
@@ -802,6 +818,7 @@
 				uart7: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
 					clock-names = "usart";
@@ -872,6 +889,7 @@
 				uart8: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
 					clock-names = "usart";
@@ -943,6 +961,7 @@
 				uart9: serial@200 {
 					compatible = "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
 					clock-names = "usart";
@@ -1050,16 +1069,6 @@
 				status = "disabled";
 			};
 
-			resistive_touch: resistive-touch {
-				compatible = "resistive-adc-touch";
-				io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
-					      <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
-					      <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
-				io-channel-names = "x", "y", "pressure";
-				touchscreen-min-pressure = <50000>;
-				status = "disabled";
-			};
-
 			pioA: pinctrl@fc038000 {
 				compatible = "atmel,sama5d2-pinctrl";
 				reg = <0xfc038000 0x600>;
@@ -1082,7 +1091,7 @@
 				#gpio-cells = <2>;
 			};
 
-			tdes@fc044000 {
+			tdes: crypto@fc044000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xfc044000 0x100>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -1095,7 +1104,6 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 				clock-names = "tdes_clk";
-				status = "okay";
 			};
 
 			classd: classd@fc048000 {
@@ -1125,7 +1133,7 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
 				clock-names = "pclk", "gclk";
 				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
-				assigned-parrents = <&pmc PMC_TYPE_GCK 55>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/sama5d29.dtsi b/arch/arm/boot/dts/sama5d29.dtsi
new file mode 100644
index 000000000000..17991c28a256
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d29.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d29.dtsi - Device Tree Include file for SAMA5D29 SoC of the SAMA5D2
+ * family.
+ *
+ *  Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
+ *
+ *  Author: Hari Prasath <Hari.PrasathGE@microchip.com>
+ *
+ */
+
+#include "sama5d2.dtsi"
+
+&macb0 {
+	compatible = "atmel,sama5d29-gem";
+};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 7c979652f330..bde8e92d60bb 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	#address-cells = <1>;
@@ -194,6 +195,7 @@
 			usart0: serial@f001c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf001c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
 				       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -208,6 +210,7 @@
 			usart1: serial@f0020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf0020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
 				       <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -222,6 +225,7 @@
 			uart0: serial@f0024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf0024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
@@ -356,6 +360,7 @@
 			usart2: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
 				       <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -370,6 +375,7 @@
 			usart3: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
 				       <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -381,7 +387,7 @@
 				status = "disabled";
 			};
 
-			sha@f8034000 {
+			sha: crypto@f8034000 {
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xf8034000 0x100>;
 				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -391,7 +397,7 @@
 				clock-names = "sha_clk";
 			};
 
-			aes@f8038000 {
+			aes: crypto@f8038000 {
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xf8038000 0x100>;
 				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -402,7 +408,7 @@
 				clock-names = "aes_clk";
 			};
 
-			tdes@f803c000 {
+			tdes: crypto@f803c000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xf803c000 0x100>;
 				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -464,6 +470,7 @@
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
 				       <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
@@ -709,7 +716,7 @@
 						atmel,pins =
 							<AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
 							 AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
-							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD7 periph A MCI0_DA6 with pullup, conflicts with TCLK0, PWMH3 */
 							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
 					};
 				};
@@ -1003,7 +1010,7 @@
 				clock-names = "slow_clk", "main_xtal";
 			};
 
-			reset_controller: rstc@fffffe00 {
+			reset_controller: reset-controller@fffffe00 {
 				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k>;
diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts
index 10fc80d6d30d..1f2dfb3127ab 100644
--- a/arch/arm/boot/dts/sama5d31ek.dts
+++ b/arch/arm/boot/dts/sama5d31ek.dts
@@ -40,7 +40,7 @@
 	};
 
 	leds {
-		d3 {
+		led-d3 {
 			label = "d3";
 			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts
index 2335bf906f69..bffd61397cb5 100644
--- a/arch/arm/boot/dts/sama5d34ek.dts
+++ b/arch/arm/boot/dts/sama5d34ek.dts
@@ -50,7 +50,7 @@
 	};
 
 	leds {
-		d3 {
+		led-d3 {
 			label = "d3";
 			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
index a3eaba995cf4..44d1173f2ffb 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	aliases {
@@ -39,6 +40,7 @@
 			uart0: serial@f0024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf0024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
@@ -50,6 +52,7 @@
 			uart1: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 384335635792..7d1d7859edb4 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -130,7 +130,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		d2 {
+		led-d2 {
 			label = "d2";
 			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;	/* PE25, conflicts with A25, RXD2 */
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi
index 5579c955f141..830a0954ba1b 100644
--- a/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm_cmp.dtsi
@@ -184,7 +184,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		d2 {
+		led-d2 {
 			label = "d2";
 			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index a499de8a7a64..3652c9e24124 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -26,7 +26,7 @@
 			spi0: spi@f0004000 {
 				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
index fa9e5e2a745d..5d9e97fecf83 100644
--- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
@@ -25,7 +25,7 @@
 			spi0: spi@f0004000 {
 				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 05c55875835d..af62157ae214 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/clock/at91.h>
 #include <dt-bindings/dma/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -101,6 +102,13 @@
 			ranges = <0 0x100000 0x2400>;
 		};
 
+		vdec0: vdec@300000 {
+			compatible = "microchip,sama5d4-vdec";
+			reg = <0x00300000 0x100000>;
+			interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+		};
+
 		usb0: gadget@400000 {
 			compatible = "atmel,sama5d3-udc";
 			reg = <0x00400000 0x100000
@@ -271,6 +279,7 @@
 			uart0: serial@f8004000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8004000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -430,6 +439,7 @@
 			usart0: serial@f802c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf802c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -448,6 +458,7 @@
 			usart1: serial@f8030000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8030000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -483,6 +494,7 @@
 			uart1: serial@fc004000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc004000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -501,6 +513,7 @@
 			usart2: serial@fc008000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc008000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -519,6 +532,7 @@
 			usart3: serial@fc00c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc00c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -537,6 +551,7 @@
 			usart4: serial@fc010000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc010000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>;
 				dmas = <&dma1
 					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
@@ -666,7 +681,7 @@
 				status = "disabled";
 			};
 
-			aes@fc044000 {
+			aes: crypto@fc044000 {
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xfc044000 0x100>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -677,10 +692,9 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "aes_clk";
-				status = "okay";
 			};
 
-			tdes@fc04c000 {
+			tdes: crpyto@fc04c000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xfc04c000 0x100>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -691,10 +705,9 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "tdes_clk";
-				status = "okay";
 			};
 
-			sha@fc050000 {
+			sha: crypto@fc050000 {
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xfc050000 0x100>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -703,7 +716,6 @@
 				dma-names = "tx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				clock-names = "sha_clk";
-				status = "okay";
 			};
 
 			hsmc: smc@fc05c000 {
@@ -722,7 +734,7 @@
 				};
 			};
 
-			reset_controller: rstc@fc068600 {
+			reset_controller: reset-controller@fc068600 {
 				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
 				reg = <0xfc068600 0x10>;
 				clocks = <&clk32k>;
@@ -766,6 +778,7 @@
 			dbgu: serial@fc069000 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfc069000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
@@ -787,7 +800,7 @@
 					0xffffffff 0x3ffcfe7c 0x1c010101	/* pioA */
 					0x7fffffff 0xfffccc3a 0x3f00cc3a	/* pioB */
 					0xffffffff 0x3ff83fff 0xff00ffff	/* pioC */
-					0x0003ff00 0x8002a800 0x00000000	/* pioD */
+					0xb003ff00 0x8002a800 0x00000000	/* pioD */
 					0xffffffff 0x7fffffff 0x76fff1bf	/* pioE */
 					>;
 
diff --git a/arch/arm/boot/dts/sama7g5-pinfunc.h b/arch/arm/boot/dts/sama7g5-pinfunc.h
new file mode 100644
index 000000000000..a67a156e26ab
--- /dev/null
+++ b/arch/arm/boot/dts/sama7g5-pinfunc.h
@@ -0,0 +1,923 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0				0
+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__FLEXCOM0_IO0		PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__CANTX3			PINMUX_PIN(PIN_PA0, 3, 1)
+#define PIN_PA0__PWML0			PINMUX_PIN(PIN_PA0, 5, 2)
+#define PIN_PA1				1
+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__FLEXCOM0_IO1		PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__CANRX3			PINMUX_PIN(PIN_PA1, 3, 1)
+#define PIN_PA1__D14			PINMUX_PIN(PIN_PA1, 4, 1)
+#define PIN_PA1__PWMH0			PINMUX_PIN(PIN_PA1, 5, 3)
+#define PIN_PA2				2
+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_RSTN		PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__FLEXCOM0_IO2		PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__PDMC1_CLK		PINMUX_PIN(PIN_PA2, 3, 1)
+#define PIN_PA2__D15			PINMUX_PIN(PIN_PA2, 4, 1)
+#define PIN_PA2__PWMH1			PINMUX_PIN(PIN_PA2, 5, 3)
+#define PIN_PA2__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA2, 6, 3)
+#define PIN_PA3				3
+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT0		PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__FLEXCOM0_IO3		PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__PDMC1_DS0		PINMUX_PIN(PIN_PA3, 3, 1)
+#define PIN_PA3__NWR1_NBS1		PINMUX_PIN(PIN_PA3, 4, 1)
+#define PIN_PA3__PWML3			PINMUX_PIN(PIN_PA3, 5, 3)
+#define PIN_PA3__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA3, 6, 3)
+#define PIN_PA4				4
+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT1		PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__FLEXCOM0_IO4		PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__PDMC1_DS1		PINMUX_PIN(PIN_PA4, 3, 1)
+#define PIN_PA4__NCS2			PINMUX_PIN(PIN_PA4, 4, 1)
+#define PIN_PA4__PWMH3			PINMUX_PIN(PIN_PA4, 5, 3)
+#define PIN_PA4__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA4, 6, 3)
+#define PIN_PA5				5
+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT2		PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA5, 2, 1)
+#define PIN_PA5__CANTX2			PINMUX_PIN(PIN_PA5, 3, 1)
+#define PIN_PA5__A23			PINMUX_PIN(PIN_PA5, 4, 1)
+#define PIN_PA5__PWMEXTRG0		PINMUX_PIN(PIN_PA5, 5, 3)
+#define PIN_PA5__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA5, 6, 3)
+#define PIN_PA6				6
+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT3		PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA6, 2, 1)
+#define PIN_PA6__CANRX2			PINMUX_PIN(PIN_PA6, 3, 1)
+#define PIN_PA6__A24			PINMUX_PIN(PIN_PA6, 4, 1)
+#define PIN_PA6__PWMEXTRG1		PINMUX_PIN(PIN_PA6, 5, 3)
+#define PIN_PA6__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA6, 6, 3)
+#define PIN_PA7				7
+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT4		PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA7, 2, 1)
+#define PIN_PA7__CANTX1			PINMUX_PIN(PIN_PA7, 3, 1)
+#define PIN_PA7__NWAIT			PINMUX_PIN(PIN_PA7, 4, 1)
+#define PIN_PA7__PWMFI0			PINMUX_PIN(PIN_PA7, 5, 3)
+#define PIN_PA7__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA7, 6, 3)
+#define PIN_PA8				8
+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT5		PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA8, 2, 1)
+#define PIN_PA8__CANRX1			PINMUX_PIN(PIN_PA8, 3, 1)
+#define PIN_PA8__NCS0			PINMUX_PIN(PIN_PA8, 4, 1)
+#define PIN_PA8__PWMIF1			PINMUX_PIN(PIN_PA8, 5, 3)
+#define PIN_PA8__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA8, 6, 3)
+#define PIN_PA9				9
+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT6		PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__CANTX0			PINMUX_PIN(PIN_PA9, 3, 1)
+#define PIN_PA9__SMCK			PINMUX_PIN(PIN_PA9, 4, 1)
+#define PIN_PA9__SPDIF_RX		PINMUX_PIN(PIN_PA9, 5, 1)
+#define PIN_PA9__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA9, 6, 3)
+#define PIN_PA10			10
+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_DAT7		PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__CANRX0		PINMUX_PIN(PIN_PA10, 3, 1)
+#define PIN_PA10__NCS1			PINMUX_PIN(PIN_PA10, 4, 1)
+#define PIN_PA10__SPDIF_TX		PINMUX_PIN(PIN_PA10, 5, 1)
+#define PIN_PA10__FLEXCOM5_IO0		PINMUX_PIN(PIN_PA10, 6, 3)
+#define PIN_PA11			11
+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_DS		PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__FLEXCOM2_IO4		PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__A0_NBS0		PINMUX_PIN(PIN_PA11, 4, 1)
+#define PIN_PA11__TIOA0			PINMUX_PIN(PIN_PA11, 5, 1)
+#define PIN_PA11__FLEXCOM5_IO1		PINMUX_PIN(PIN_PA11, 6, 3)
+#define PIN_PA12			12
+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__SDMMC0_WP		PINMUX_PIN(PIN_PA12, 1, 1)
+#define PIN_PA12__FLEXCOM1_IO3		PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__FLEXCOM3_IO5		PINMUX_PIN(PIN_PA12, 4, 1)
+#define PIN_PA12__PWML2			PINMUX_PIN(PIN_PA12, 5, 3)
+#define PIN_PA12__FLEXCOM6_IO0		PINMUX_PIN(PIN_PA12, 6, 3)
+#define PIN_PA13			13
+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__SDMMC0_1V8SEL		PINMUX_PIN(PIN_PA13, 1, 1)
+#define PIN_PA13__FLEXCOM1_IO2		PINMUX_PIN(PIN_PA13, 2, 1)
+#define PIN_PA13__FLEXCOM3_IO6		PINMUX_PIN(PIN_PA13, 4, 1)
+#define PIN_PA13__PWMH2			PINMUX_PIN(PIN_PA13, 5, 3)
+#define PIN_PA13__FLEXCOM6_IO1		PINMUX_PIN(PIN_PA13, 6, 3)
+#define PIN_PA14			14
+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__SDMMC0_CD		PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__FLEXCOM1_IO4		PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__A25			PINMUX_PIN(PIN_PA14, 4, 1)
+#define PIN_PA14__PWML1			PINMUX_PIN(PIN_PA14, 5, 3)
+#define PIN_PA15			15
+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__G0_TXEN		PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__ISC_MCK		PINMUX_PIN(PIN_PA15, 3, 1)
+#define PIN_PA15__A1			PINMUX_PIN(PIN_PA15, 4, 1)
+#define PIN_PA15__TIOB0			PINMUX_PIN(PIN_PA15, 5, 1)
+#define PIN_PA16			16
+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__G0_TX0		PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__ISC_D0		PINMUX_PIN(PIN_PA16, 3, 1)
+#define PIN_PA16__A2			PINMUX_PIN(PIN_PA16, 4, 1)
+#define PIN_PA16__TCLK0			PINMUX_PIN(PIN_PA16, 5, 1)
+#define PIN_PA17			17
+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__G0_TX1		PINMUX_PIN(PIN_PA17, 1, 1)
+#define PIN_PA17__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA17, 2, 1)
+#define PIN_PA17__ISC_D1		PINMUX_PIN(PIN_PA17, 3, 1)
+#define PIN_PA17__A3			PINMUX_PIN(PIN_PA17, 4, 1)
+#define PIN_PA17__TIOA1			PINMUX_PIN(PIN_PA17, 5, 1)
+#define PIN_PA18			18
+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__G0_RXDV		PINMUX_PIN(PIN_PA18, 1, 1)
+#define PIN_PA18__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA18, 2, 1)
+#define PIN_PA18__ISC_D2		PINMUX_PIN(PIN_PA18, 3, 1)
+#define PIN_PA18__A4			PINMUX_PIN(PIN_PA18, 4, 1)
+#define PIN_PA18__TIOB1			PINMUX_PIN(PIN_PA18, 5, 1)
+#define PIN_PA19			19
+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__G0_RX0		PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA19, 2, 1)
+#define PIN_PA19__ISC_D3		PINMUX_PIN(PIN_PA19, 3, 1)
+#define PIN_PA19__A5			PINMUX_PIN(PIN_PA19, 4, 1)
+#define PIN_PA19__TCLK1			PINMUX_PIN(PIN_PA19, 5, 1)
+#define PIN_PA20			20
+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__G0_RX1		PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__FLEXCOM4_IO0		PINMUX_PIN(PIN_PA20, 2, 1)
+#define PIN_PA20__ISC_D4		PINMUX_PIN(PIN_PA20, 3, 1)
+#define PIN_PA20__A6			PINMUX_PIN(PIN_PA20, 4, 1)
+#define PIN_PA20__TIOA2			PINMUX_PIN(PIN_PA20, 5, 1)
+#define PIN_PA21			21
+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__G0_RXER		PINMUX_PIN(PIN_PA21, 1, 1)
+#define PIN_PA21__FLEXCOM4_IO1		PINMUX_PIN(PIN_PA21, 2, 1)
+#define PIN_PA21__ISC_D5		PINMUX_PIN(PIN_PA21, 3, 1)
+#define PIN_PA21__A7			PINMUX_PIN(PIN_PA21, 4, 1)
+#define PIN_PA21__TIOB2			PINMUX_PIN(PIN_PA21, 5, 1)
+#define PIN_PA22			22
+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__G0_MDC		PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__FLEXCOM4_IO2		PINMUX_PIN(PIN_PA22, 2, 1)
+#define PIN_PA22__ISC_D6		PINMUX_PIN(PIN_PA22, 3, 1)
+#define PIN_PA22__A8			PINMUX_PIN(PIN_PA22, 4, 1)
+#define PIN_PA22__TCLK2			PINMUX_PIN(PIN_PA22, 5, 1)
+#define PIN_PA23			23
+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__G0_MDIO		PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__FLEXCOM4_IO3		PINMUX_PIN(PIN_PA23, 2, 1)
+#define PIN_PA23__ISC_D7		PINMUX_PIN(PIN_PA23, 3, 1)
+#define PIN_PA23__A9			PINMUX_PIN(PIN_PA23, 4, 1)
+#define PIN_PA24			24
+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__G0_TXCK		PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__FLEXCOM4_IO4		PINMUX_PIN(PIN_PA24, 2, 1)
+#define PIN_PA24__ISC_HSYNC		PINMUX_PIN(PIN_PA24, 3, 1)
+#define PIN_PA24__A10			PINMUX_PIN(PIN_PA24, 4, 1)
+#define PIN_PA24__FLEXCOM0_IO5		PINMUX_PIN(PIN_PA24, 5, 1)
+#define PIN_PA25			25
+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__G0_125CK		PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__FLEXCOM5_IO4		PINMUX_PIN(PIN_PA25, 2, 1)
+#define PIN_PA25__ISC_VSYNC		PINMUX_PIN(PIN_PA25, 3, 1)
+#define PIN_PA25__A11			PINMUX_PIN(PIN_PA25, 4, 1)
+#define PIN_PA25__FLEXCOM0_IO6		PINMUX_PIN(PIN_PA25, 5, 1)
+#define PIN_PA25__FLEXCOM7_IO0		PINMUX_PIN(PIN_PA25, 6, 3)
+#define PIN_PA26			26
+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__G0_TX2		PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__FLEXCOM5_IO2		PINMUX_PIN(PIN_PA26, 2, 1)
+#define PIN_PA26__ISC_FIELD		PINMUX_PIN(PIN_PA26, 3, 1)
+#define PIN_PA26__A12			PINMUX_PIN(PIN_PA26, 4, 1)
+#define PIN_PA26__TF0			PINMUX_PIN(PIN_PA26, 5, 1)
+#define PIN_PA26__FLEXCOM7_IO1		PINMUX_PIN(PIN_PA26, 6, 3)
+#define PIN_PA27			27
+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__G0_TX3		PINMUX_PIN(PIN_PA27, 1, 1)
+#define PIN_PA27__FLEXCOM5_IO3		PINMUX_PIN(PIN_PA27, 2, 1)
+#define PIN_PA27__ISC_PCK		PINMUX_PIN(PIN_PA27, 3, 1)
+#define PIN_PA27__A13			PINMUX_PIN(PIN_PA27, 4, 1)
+#define PIN_PA27__TK0			PINMUX_PIN(PIN_PA27, 5, 1)
+#define PIN_PA27__FLEXCOM8_IO0		PINMUX_PIN(PIN_PA27, 6, 3)
+#define PIN_PA28			28
+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__G0_RX2		PINMUX_PIN(PIN_PA28, 1, 1)
+#define PIN_PA28__FLEXCOM5_IO0		PINMUX_PIN(PIN_PA28, 2, 1)
+#define PIN_PA28__ISC_D8		PINMUX_PIN(PIN_PA28, 3, 1)
+#define PIN_PA28__A14			PINMUX_PIN(PIN_PA28, 4, 1)
+#define PIN_PA28__RD0			PINMUX_PIN(PIN_PA28, 5, 1)
+#define PIN_PA28__FLEXCOM8_IO1		PINMUX_PIN(PIN_PA28, 6, 3)
+#define PIN_PA29			29
+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__G0_RX3		PINMUX_PIN(PIN_PA29, 1, 1)
+#define PIN_PA29__FLEXCOM5_IO1		PINMUX_PIN(PIN_PA29, 2, 1)
+#define PIN_PA29__ISC_D9		PINMUX_PIN(PIN_PA29, 3, 1)
+#define PIN_PA29__A15			PINMUX_PIN(PIN_PA29, 4, 1)
+#define PIN_PA29__RF0			PINMUX_PIN(PIN_PA29, 5, 1)
+#define PIN_PA29__FLEXCOM9_IO0		PINMUX_PIN(PIN_PA29, 6, 3)
+#define PIN_PA30			30
+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__G0_RXCK		PINMUX_PIN(PIN_PA30, 1, 1)
+#define PIN_PA30__FLEXCOM6_IO4		PINMUX_PIN(PIN_PA30, 2, 1)
+#define PIN_PA30__ISC_D10		PINMUX_PIN(PIN_PA30, 3, 1)
+#define PIN_PA30__A16			PINMUX_PIN(PIN_PA30, 4, 1)
+#define PIN_PA30__RK0			PINMUX_PIN(PIN_PA30, 5, 1)
+#define PIN_PA30__FLEXCOM9_IO1		PINMUX_PIN(PIN_PA30, 6, 3)
+#define PIN_PA31			31
+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__G0_TXER		PINMUX_PIN(PIN_PA31, 1, 1)
+#define PIN_PA31__FLEXCOM6_IO2		PINMUX_PIN(PIN_PA31, 2, 1)
+#define PIN_PA31__ISC_D11		PINMUX_PIN(PIN_PA31, 3, 1)
+#define PIN_PA31__A17			PINMUX_PIN(PIN_PA31, 4, 1)
+#define PIN_PA31__TD0			PINMUX_PIN(PIN_PA31, 5, 1)
+#define PIN_PA31__FLEXCOM10_IO0		PINMUX_PIN(PIN_PA31, 6, 3)
+#define PIN_PB0				32
+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__G0_COL			PINMUX_PIN(PIN_PB0, 1, 1)
+#define PIN_PB0__FLEXCOM6_IO3		PINMUX_PIN(PIN_PB0, 2, 2)
+#define PIN_PB0__EXT_IRQ0		PINMUX_PIN(PIN_PB0, 3, 1)
+#define PIN_PB0__A18			PINMUX_PIN(PIN_PB0, 4, 1)
+#define PIN_PB0__SPDIF_RX		PINMUX_PIN(PIN_PB0, 5, 2)
+#define PIN_PB0__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB0, 6, 3)
+#define PIN_PB1				33
+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__G0_CRS			PINMUX_PIN(PIN_PB1, 1, 1)
+#define PIN_PB1__FLEXCOM6_IO1		PINMUX_PIN(PIN_PB1, 2, 2)
+#define PIN_PB1__EXT_IRQ1		PINMUX_PIN(PIN_PB1, 3, 1)
+#define PIN_PB1__A19			PINMUX_PIN(PIN_PB1, 4, 1)
+#define PIN_PB1__SPDIF_TX		PINMUX_PIN(PIN_PB1, 5, 2)
+#define PIN_PB1__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB1, 6, 3)
+#define PIN_PB2				34
+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__G0_TSUCOMP		PINMUX_PIN(PIN_PB2, 1, 1)
+#define PIN_PB2__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__ADTRG			PINMUX_PIN(PIN_PB2, 3, 1)
+#define PIN_PB2__A20			PINMUX_PIN(PIN_PB2, 4, 1)
+#define PIN_PB2__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB3				35
+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__RF1			PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB3, 2, 1)
+#define PIN_PB3__PCK2			PINMUX_PIN(PIN_PB3, 3, 2)
+#define PIN_PB3__D8			PINMUX_PIN(PIN_PB3, 4, 1)
+#define PIN_PB4				36
+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__TF1			PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB4, 2, 1)
+#define PIN_PB4__PCK3			PINMUX_PIN(PIN_PB4, 3, 2)
+#define PIN_PB4__D9			PINMUX_PIN(PIN_PB4, 4, 1)
+#define PIN_PB5				37
+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__TK1			PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__FLEXCOM11_IO2		PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__PCK4			PINMUX_PIN(PIN_PB5, 3, 2)
+#define PIN_PB5__D10			PINMUX_PIN(PIN_PB5, 4, 1)
+#define PIN_PB6				38
+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__RK1			PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__FLEXCOM11_IO3		PINMUX_PIN(PIN_PB6, 2, 1)
+#define PIN_PB6__PCK5			PINMUX_PIN(PIN_PB6, 3, 2)
+#define PIN_PB6__D11			PINMUX_PIN(PIN_PB6, 4, 1)
+#define PIN_PB7				39
+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__TD1			PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__FLEXCOM11_IO4		PINMUX_PIN(PIN_PB7, 2, 1)
+#define PIN_PB7__FLEXCOM3_IO5		PINMUX_PIN(PIN_PB7, 3, 2)
+#define PIN_PB7__D12			PINMUX_PIN(PIN_PB7, 4, 1)
+#define PIN_PB8				40
+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__RD1			PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__FLEXCOM3_IO6		PINMUX_PIN(PIN_PB8, 3, 2)
+#define PIN_PB8__D13			PINMUX_PIN(PIN_PB8, 4, 1)
+#define PIN_PB9				41
+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__QSPI0_IO3		PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB9, 2, 1)
+#define PIN_PB9__PDMC0_CLK		PINMUX_PIN(PIN_PB9, 3, 1)
+#define PIN_PB9__NCS3_NANDCS		PINMUX_PIN(PIN_PB9, 4, 1)
+#define PIN_PB9__PWML0			PINMUX_PIN(PIN_PB9, 5, 2)
+#define PIN_PB10			42
+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__QSPI0_IO2		PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__FLEXCOM8_IO2		PINMUX_PIN(PIN_PB10, 2, 1)
+#define PIN_PB10__PDMC0_DS0		PINMUX_PIN(PIN_PB10, 3, 1)
+#define PIN_PB10__NWE_NWR0_NANDWE	PINMUX_PIN(PIN_PB10, 4, 1)
+#define PIN_PB10__PWMH0			PINMUX_PIN(PIN_PB10, 5, 2)
+#define PIN_PB11			43
+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__QSPI0_IO1		PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__FLEXCOM8_IO3		PINMUX_PIN(PIN_PB11, 2, 1)
+#define PIN_PB11__PDMC0_DS1		PINMUX_PIN(PIN_PB11, 3, 1)
+#define PIN_PB11__NRD_NANDOE		PINMUX_PIN(PIN_PB11, 4, 1)
+#define PIN_PB11__PWML1			PINMUX_PIN(PIN_PB11, 5, 2)
+#define PIN_PB12			44
+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__QSPI0_IO0		PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__FLEXCOM8_IO4		PINMUX_PIN(PIN_PB12, 2, 1)
+#define PIN_PB12__FLEXCOM6_IO5		PINMUX_PIN(PIN_PB12, 3, 1)
+#define PIN_PB12__A21_NANDALE		PINMUX_PIN(PIN_PB12, 4, 1)
+#define PIN_PB12__PWMH1			PINMUX_PIN(PIN_PB12, 5, 2)
+#define PIN_PB13			45
+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__QSPI0_CS		PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__FLEXCOM9_IO0		PINMUX_PIN(PIN_PB13, 2, 1)
+#define PIN_PB13__FLEXCOM6_IO6		PINMUX_PIN(PIN_PB13, 3, 1)
+#define PIN_PB13__A22_NANDCLE		PINMUX_PIN(PIN_PB13, 4, 1)
+#define PIN_PB13__PWML2			PINMUX_PIN(PIN_PB13, 5, 2)
+#define PIN_PB14			46
+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__QSPI0_SCK		PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__FLEXCOM9_IO1		PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__D0			PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__PWMH2			PINMUX_PIN(PIN_PB14, 5, 2)
+#define PIN_PB15			47
+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__QSPI0_SCKN		PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__FLEXCOM9_IO2		PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__D1			PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__PWML3			PINMUX_PIN(PIN_PB15, 5, 2)
+#define PIN_PB16			48
+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__QSPI0_IO4		PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__FLEXCOM9_IO3		PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__PCK0			PINMUX_PIN(PIN_PB16, 3, 1)
+#define PIN_PB16__D2			PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__PWMH3			PINMUX_PIN(PIN_PB16, 5, 2)
+#define PIN_PB16__EXT_IRQ0		PINMUX_PIN(PIN_PB16, 6, 2)
+#define PIN_PB17			49
+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__QSPI0_IO5		PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__FLEXCOM9_IO4		PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__PCK1			PINMUX_PIN(PIN_PB17, 3, 1)
+#define PIN_PB17__D3			PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__PWMEXTRG0		PINMUX_PIN(PIN_PB17, 5, 2)
+#define PIN_PB17__EXT_IRQ1		PINMUX_PIN(PIN_PB17, 6, 2)
+#define PIN_PB18			50
+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__QSPI0_IO6		PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__FLEXCOM10_IO0		PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__PCK2			PINMUX_PIN(PIN_PB18, 3, 1)
+#define PIN_PB18__D4			PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__PWMEXTRG1		PINMUX_PIN(PIN_PB18, 5, 2)
+#define PIN_PB19			51
+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__QSPI0_IO7		PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__FLEXCOM10_IO1		PINMUX_PIN(PIN_PB19, 2, 1)
+#define PIN_PB19__PCK3			PINMUX_PIN(PIN_PB19, 3, 1)
+#define PIN_PB19__D5			PINMUX_PIN(PIN_PB19, 4, 1)
+#define PIN_PB19__PWMFI0		PINMUX_PIN(PIN_PB19, 5, 2)
+#define PIN_PB20			52
+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__QSPI0_DQS		PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__FLEXCOM10_IO2		PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__D6			PINMUX_PIN(PIN_PB20, 4, 1)
+#define PIN_PB20__PWMFI1		PINMUX_PIN(PIN_PB20, 5, 2)
+#define PIN_PB21			53
+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__QSPI0_INT		PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__FLEXCOM10_IO3		PINMUX_PIN(PIN_PB21, 2, 1)
+#define PIN_PB21__FLEXCOM9_IO5		PINMUX_PIN(PIN_PB21, 3, 1)
+#define PIN_PB21__D7			PINMUX_PIN(PIN_PB21, 4, 1)
+#define PIN_PB22			54
+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__QSPI1_IO3		PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__FLEXCOM10_IO4		PINMUX_PIN(PIN_PB22, 2, 1)
+#define PIN_PB22__FLEXCOM9_IO6		PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__NANDRDY		PINMUX_PIN(PIN_PB22, 4, 1)
+#define PIN_PB23			55
+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__QSPI1_IO2		PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__FLEXCOM7_IO0		PINMUX_PIN(PIN_PB23, 2, 1)
+#define PIN_PB23__I2SMCC0_CK		PINMUX_PIN(PIN_PB23, 3, 1)
+#define PIN_PB23__PCK4			PINMUX_PIN(PIN_PB23, 6, 1)
+#define PIN_PB24			56
+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__QSPI1_IO1		PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__FLEXCOM7_IO1		PINMUX_PIN(PIN_PB24, 2, 1)
+#define PIN_PB24__I2SMCC0_WS		PINMUX_PIN(PIN_PB24, 3, 1)
+#define PIN_PB24__PCK5			PINMUX_PIN(PIN_PB24, 6, 1)
+#define PIN_PB25			57
+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__QSPI1_IO0		PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__FLEXCOM7_IO2		PINMUX_PIN(PIN_PB25, 2, 1)
+#define PIN_PB25__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PB25, 3, 1)
+#define PIN_PB25__PCK6			PINMUX_PIN(PIN_PB25, 6, 1)
+#define PIN_PB26			58
+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__QSPI1_CS		PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__FLEXCOM7_IO3		PINMUX_PIN(PIN_PB26, 2, 1)
+#define PIN_PB26__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PB26, 3, 1)
+#define PIN_PB26__PWMEXTRG0		PINMUX_PIN(PIN_PB26, 5, 1)
+#define PIN_PB26__PCK7			PINMUX_PIN(PIN_PB26, 6, 1)
+#define PIN_PB27			59
+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__QSPI1_SCK		PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__FLEXCOM7_IO4		PINMUX_PIN(PIN_PB27, 2, 1)
+#define PIN_PB27__I2SMCC0_MCK		PINMUX_PIN(PIN_PB27, 3, 1)
+#define PIN_PB27__PWMEXTRG1		PINMUX_PIN(PIN_PB27, 5, 1)
+#define PIN_PB28			60
+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__SDMMC1_RSTN		PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__ADTRG			PINMUX_PIN(PIN_PB28, 2, 2)
+#define PIN_PB28__PWMFI0		PINMUX_PIN(PIN_PB28, 5, 1)
+#define PIN_PB28__FLEXCOM7_IO0		PINMUX_PIN(PIN_PB28, 6, 4)
+#define PIN_PB29			61
+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__SDMMC1_CMD		PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__FLEXCOM3_IO2		PINMUX_PIN(PIN_PB29, 2, 2)
+#define PIN_PB29__FLEXCOM0_IO5		PINMUX_PIN(PIN_PB29, 3, 2)
+#define PIN_PB29__TIOA3			PINMUX_PIN(PIN_PB29, 4, 2)
+#define PIN_PB29__PWMFI1		PINMUX_PIN(PIN_PB29, 5, 1)
+#define PIN_PB29__FLEXCOM7_IO1		PINMUX_PIN(PIN_PB29, 6, 4)
+#define PIN_PB30			62
+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__SDMMC1_CK		PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__FLEXCOM3_IO3		PINMUX_PIN(PIN_PB30, 2, 2)
+#define PIN_PB30__FLEXCOM0_IO6		PINMUX_PIN(PIN_PB30, 3, 2)
+#define PIN_PB30__TIOB3			PINMUX_PIN(PIN_PB30, 4, 1)
+#define PIN_PB30__PWMH0			PINMUX_PIN(PIN_PB30, 5, 1)
+#define PIN_PB30__FLEXCOM8_IO0		PINMUX_PIN(PIN_PB30, 6, 4)
+#define PIN_PB31			63
+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__SDMMC1_DAT0		PINMUX_PIN(PIN_PB31, 1, 1)
+#define PIN_PB31__FLEXCOM3_IO4		PINMUX_PIN(PIN_PB31, 2, 2)
+#define PIN_PB31__FLEXCOM9_IO5		PINMUX_PIN(PIN_PB31, 3, 2)
+#define PIN_PB31__TCLK3			PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__PWML0			PINMUX_PIN(PIN_PB31, 5, 1)
+#define PIN_PB31__FLEXCOM8_IO1		PINMUX_PIN(PIN_PB31, 6, 4)
+#define PIN_PC0				64
+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__SDMMC1_DAT1		PINMUX_PIN(PIN_PC0, 1, 1)
+#define PIN_PC0__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC0, 2, 2)
+#define PIN_PC0__TIOA4			PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__PWML1			PINMUX_PIN(PIN_PC0, 5, 1)
+#define PIN_PC0__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC0, 6, 4)
+#define PIN_PC1				65
+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__SDMMC1_DAT2		PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC1, 2, 2)
+#define PIN_PC1__TIOB4			PINMUX_PIN(PIN_PC1, 4, 1)
+#define PIN_PC1__PWMH1			PINMUX_PIN(PIN_PC1, 5, 1)
+#define PIN_PC1__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC1, 6, 4)
+#define PIN_PC2				66
+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__SDMMC1_DAT3		PINMUX_PIN(PIN_PC2, 1, 1)
+#define PIN_PC2__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC2, 2, 2)
+#define PIN_PC2__TCLK4			PINMUX_PIN(PIN_PC2, 4, 1)
+#define PIN_PC2__PWML2			PINMUX_PIN(PIN_PC2, 5, 1)
+#define PIN_PC2__FLEXCOM10_IO0		PINMUX_PIN(PIN_PC2, 6, 4)
+#define PIN_PC3				67
+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__SDMMC1_WP		PINMUX_PIN(PIN_PC3, 1, 1)
+#define PIN_PC3__FLEXCOM4_IO1		PINMUX_PIN(PIN_PC3, 2, 2)
+#define PIN_PC3__TIOA5			PINMUX_PIN(PIN_PC3, 4, 1)
+#define PIN_PC3__PWMH2			PINMUX_PIN(PIN_PC3, 5, 1)
+#define PIN_PC3__FLEXCOM10_IO1		PINMUX_PIN(PIN_PC3, 6, 4)
+#define PIN_PC4				68
+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__SDMMC1_CD		PINMUX_PIN(PIN_PC4, 1, 1)
+#define PIN_PC4__FLEXCOM4_IO2		PINMUX_PIN(PIN_PC4, 2, 2)
+#define PIN_PC4__FLEXCOM9_IO6		PINMUX_PIN(PIN_PC4, 3, 2)
+#define PIN_PC4__TIOB5			PINMUX_PIN(PIN_PC4, 4, 1)
+#define PIN_PC4__PWML3			PINMUX_PIN(PIN_PC4, 5, 1)
+#define PIN_PC4__FLEXCOM11_IO0		PINMUX_PIN(PIN_PC4, 6, 4)
+#define PIN_PC5				69
+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__SDMMC1_1V8SEL		PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__FLEXCOM4_IO3		PINMUX_PIN(PIN_PC5, 2, 2)
+#define PIN_PC5__FLEXCOM6_IO5		PINMUX_PIN(PIN_PC5, 3, 2)
+#define PIN_PC5__TCLK5			PINMUX_PIN(PIN_PC5, 4, 1)
+#define PIN_PC5__PWMH3			PINMUX_PIN(PIN_PC5, 5, 1)
+#define PIN_PC5__FLEXCOM11_IO1		PINMUX_PIN(PIN_PC5, 6, 4)
+#define PIN_PC6				70
+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__FLEXCOM4_IO4		PINMUX_PIN(PIN_PC6, 2, 2)
+#define PIN_PC6__FLEXCOM6_IO6		PINMUX_PIN(PIN_PC6, 3, 2)
+#define PIN_PC7				71
+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__I2SMCC0_DIN0		PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__FLEXCOM7_IO0		PINMUX_PIN(PIN_PC7, 2, 2)
+#define PIN_PC8				72
+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__I2SMCC0_DIN1		PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__FLEXCOM7_IO1		PINMUX_PIN(PIN_PC8, 2, 2)
+#define PIN_PC9				73
+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PC9, 1, 1)
+#define PIN_PC9__FLEXCOM7_IO2		PINMUX_PIN(PIN_PC9, 2, 2)
+#define PIN_PC9__FLEXCOM1_IO0		PINMUX_PIN(PIN_PC9, 6, 4)
+#define PIN_PC10			74
+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PC10, 1, 1)
+#define PIN_PC10__FLEXCOM7_IO3		PINMUX_PIN(PIN_PC10, 2, 2)
+#define PIN_PC10__FLEXCOM1_IO1		PINMUX_PIN(PIN_PC10, 6, 4)
+#define PIN_PC11			75
+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__I2SMCC1_CK		PINMUX_PIN(PIN_PC11, 1, 1)
+#define PIN_PC11__FLEXCOM7_IO4		PINMUX_PIN(PIN_PC11, 2, 2)
+#define PIN_PC11__FLEXCOM2_IO0		PINMUX_PIN(PIN_PC11, 6, 4)
+#define PIN_PC12			76
+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__I2SMCC1_WS		PINMUX_PIN(PIN_PC12, 1, 1)
+#define PIN_PC12__FLEXCOM8_IO2		PINMUX_PIN(PIN_PC12, 2, 2)
+#define PIN_PC12__FLEXCOM2_IO1		PINMUX_PIN(PIN_PC12, 6, 4)
+#define PIN_PC13			77
+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__I2SMCC1_MCK		PINMUX_PIN(PIN_PC13, 1, 1)
+#define PIN_PC13__FLEXCOM8_IO1		PINMUX_PIN(PIN_PC13, 2, 2)
+#define PIN_PC13__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC13, 6, 4)
+#define PIN_PC14			78
+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PC14, 1, 1)
+#define PIN_PC14__FLEXCOM8_IO0		PINMUX_PIN(PIN_PC14, 2, 2)
+#define PIN_PC14__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC14, 6, 4)
+#define PIN_PC15			79
+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PC15, 1, 1)
+#define PIN_PC15__FLEXCOM8_IO3		PINMUX_PIN(PIN_PC15, 2, 2)
+#define PIN_PC15__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC15, 6, 4)
+#define PIN_PC16			80
+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PC16, 1, 1)
+#define PIN_PC16__FLEXCOM8_IO4		PINMUX_PIN(PIN_PC16, 2, 2)
+#define PIN_PC16__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC16, 6, 4)
+#define PIN_PC17			81
+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PC17, 1, 1)
+#define PIN_PC17__EXT_IRQ0		PINMUX_PIN(PIN_PC17, 2, 3)
+#define PIN_PC17__FLEXCOM5_IO0		PINMUX_PIN(PIN_PC17, 6, 4)
+#define PIN_PC18			82
+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__I2SMCC1_DIN0		PINMUX_PIN(PIN_PC18, 1, 1)
+#define PIN_PC18__FLEXCOM9_IO0		PINMUX_PIN(PIN_PC18, 2, 2)
+#define PIN_PC18__FLEXCOM5_IO1		PINMUX_PIN(PIN_PC18, 6, 4)
+#define PIN_PC19			83
+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__I2SMCC1_DIN1		PINMUX_PIN(PIN_PC19, 1, 1)
+#define PIN_PC19__FLEXCOM9_IO1		PINMUX_PIN(PIN_PC19, 2, 2)
+#define PIN_PC19__FLEXCOM6_IO0		PINMUX_PIN(PIN_PC19, 6, 4)
+#define PIN_PC20			84
+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__I2SMCC1_DIN2		PINMUX_PIN(PIN_PC20, 1, 1)
+#define PIN_PC20__FLEXCOM9_IO4		PINMUX_PIN(PIN_PC20, 2, 2)
+#define PIN_PC20__FLEXCOM6_IO1		PINMUX_PIN(PIN_PC20, 6, 4)
+#define PIN_PC21			85
+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__I2SMCC1_DIN3		PINMUX_PIN(PIN_PC21, 1, 1)
+#define PIN_PC21__FLEXCOM9_IO2		PINMUX_PIN(PIN_PC21, 2, 2)
+#define PIN_PC21__D3			PINMUX_PIN(PIN_PC21, 4, 2)
+#define PIN_PC21__FLEXCOM6_IO0		PINMUX_PIN(PIN_PC21, 6, 5)
+#define PIN_PC22			86
+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__I2SMCC0_DIN2		PINMUX_PIN(PIN_PC22, 1, 1)
+#define PIN_PC22__FLEXCOM9_IO3		PINMUX_PIN(PIN_PC22, 2, 2)
+#define PIN_PC22__D4			PINMUX_PIN(PIN_PC22, 4, 2)
+#define PIN_PC22__FLEXCOM6_IO1		PINMUX_PIN(PIN_PC22, 6, 5)
+#define PIN_PC23			87
+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__I2SMCC0_DIN3		PINMUX_PIN(PIN_PC23, 1, 1)
+#define PIN_PC23__FLEXCOM0_IO5		PINMUX_PIN(PIN_PC23, 2, 3)
+#define PIN_PC23__D5			PINMUX_PIN(PIN_PC23, 4, 2)
+#define PIN_PC23__FLEXCOM7_IO0		PINMUX_PIN(PIN_PC23, 6, 5)
+#define PIN_PC24			88
+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__FLEXCOM0_IO6		PINMUX_PIN(PIN_PC24, 2, 3)
+#define PIN_PC24__EXT_IRQ1		PINMUX_PIN(PIN_PC24, 3, 3)
+#define PIN_PC24__D6			PINMUX_PIN(PIN_PC24, 4, 2)
+#define PIN_PC24__FLEXCOM7_IO1		PINMUX_PIN(PIN_PC24, 6, 5)
+#define PIN_PC25			89
+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__NTRST			PINMUX_PIN(PIN_PC25, 1, 1)
+#define PIN_PC26			90
+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__TCK_SWCLK		PINMUX_PIN(PIN_PC26, 1, 1)
+#define PIN_PC27			91
+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__TMS_SWDIO		PINMUX_PIN(PIN_PC27, 1, 1)
+#define PIN_PC28			92
+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__TDI			PINMUX_PIN(PIN_PC28, 1, 1)
+#define PIN_PC29			93
+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__TDO			PINMUX_PIN(PIN_PC29, 1, 1)
+#define PIN_PC30			94
+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__FLEXCOM10_IO0		PINMUX_PIN(PIN_PC30, 2, 2)
+#define PIN_PC31			95
+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__FLEXCOM10_IO1		PINMUX_PIN(PIN_PC31, 2, 2)
+#define PIN_PD0				96
+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD0, 2, 2)
+#define PIN_PD1				97
+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__FLEXCOM11_IO1		PINMUX_PIN(PIN_PD1, 2, 2)
+#define PIN_PD2				98
+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__SDMMC2_RSTN		PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__PCK0			PINMUX_PIN(PIN_PD2, 2, 2)
+#define PIN_PD2__CANTX4			PINMUX_PIN(PIN_PD2, 3, 1)
+#define PIN_PD2__D7			PINMUX_PIN(PIN_PD2, 4, 2)
+#define PIN_PD2__TIOA0			PINMUX_PIN(PIN_PD2, 5, 2)
+#define PIN_PD2__FLEXCOM8_IO0		PINMUX_PIN(PIN_PD2, 6, 5)
+#define PIN_PD3				99
+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__SDMMC2_CMD		PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FLEXCOM0_IO0		PINMUX_PIN(PIN_PD3, 2, 2)
+#define PIN_PD3__CANRX4			PINMUX_PIN(PIN_PD3, 3, 1)
+#define PIN_PD3__NANDRDY		PINMUX_PIN(PIN_PD3, 4, 2)
+#define PIN_PD3__TIOB0			PINMUX_PIN(PIN_PD3, 5, 2)
+#define PIN_PD3__FLEXCOM8_IO1		PINMUX_PIN(PIN_PD3, 6, 5)
+#define PIN_PD4				100
+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__SDMMC2_CK		PINMUX_PIN(PIN_PD4, 1, 1)
+#define PIN_PD4__FLEXCOM0_IO1		PINMUX_PIN(PIN_PD4, 2, 2)
+#define PIN_PD4__CANTX5			PINMUX_PIN(PIN_PD4, 3, 1)
+#define PIN_PD4__NCS3_NANDCS		PINMUX_PIN(PIN_PD4, 4, 2)
+#define PIN_PD4__TCLK0			PINMUX_PIN(PIN_PD4, 5, 2)
+#define PIN_PD4__FLEXCOM9_IO0		PINMUX_PIN(PIN_PD4, 6, 5)
+#define PIN_PD5				101
+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__SDMMC2_DAT0		PINMUX_PIN(PIN_PD5, 1, 1)
+#define PIN_PD5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PD5, 2, 2)
+#define PIN_PD5__CANRX5			PINMUX_PIN(PIN_PD5, 3, 1)
+#define PIN_PD5__NWE_NWR0_NANDWE	PINMUX_PIN(PIN_PD5, 4, 2)
+#define PIN_PD5__TIOA1			PINMUX_PIN(PIN_PD5, 5, 2)
+#define PIN_PD5__FLEXCOM9_IO1		PINMUX_PIN(PIN_PD5, 6, 5)
+#define PIN_PD6				102
+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__SDMMC2_DAT1		PINMUX_PIN(PIN_PD6, 1, 1)
+#define PIN_PD6__FLEXCOM0_IO3		PINMUX_PIN(PIN_PD6, 2, 2)
+#define PIN_PD6__SPDIF_RX		PINMUX_PIN(PIN_PD6, 3, 3)
+#define PIN_PD6__NRD_NANDOE		PINMUX_PIN(PIN_PD6, 4, 2)
+#define PIN_PD6__TIOB1			PINMUX_PIN(PIN_PD6, 5, 2)
+#define PIN_PD6__FLEXCOM10_IO0		PINMUX_PIN(PIN_PD6, 6, 5)
+#define PIN_PD7				103
+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__SDMMC2_DAT2		PINMUX_PIN(PIN_PD7, 1, 1)
+#define PIN_PD7__FLEXCOM0_IO4		PINMUX_PIN(PIN_PD7, 2, 2)
+#define PIN_PD7__SPDIF_TX		PINMUX_PIN(PIN_PD7, 2, 2)
+#define PIN_PD7__A21_NANDALE		PINMUX_PIN(PIN_PD7, 4, 2)
+#define PIN_PD7__TCLK1			PINMUX_PIN(PIN_PD7, 5, 2)
+#define PIN_PD7__FLEXCOM10_IO1		PINMUX_PIN(PIN_PD7, 6, 5)
+#define PIN_PD8				104
+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__SDMMC2_DAT3		PINMUX_PIN(PIN_PD8, 1, 1)
+#define PIN_PD8__I2SMCC0_DIN0		PINMUX_PIN(PIN_PD8, 3, 1)
+#define PIN_PD8__A22_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__TIOA2			PINMUX_PIN(PIN_PD8, 5, 2)
+#define PIN_PD8__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD8, 6, 5)
+#define PIN_PD9				105
+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__SDMMC2_WP		PINMUX_PIN(PIN_PD9, 1, 1)
+#define PIN_PD9__I2SMCC0_DIN1		PINMUX_PIN(PIN_PD9, 3, 2)
+#define PIN_PD9__D0			PINMUX_PIN(PIN_PD9, 4, 2)
+#define PIN_PD9__TIOB2			PINMUX_PIN(PIN_PD9, 5, 2)
+#define PIN_PD9__FLEXCOM11_IO1		PINMUX_PIN(PIN_PD9, 6, 5)
+#define PIN_PD10			106
+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__SDMMC2_CD		PINMUX_PIN(PIN_PD10, 1, 1)
+#define PIN_PD10__PCK6			PINMUX_PIN(PIN_PD10, 2, 2)
+#define PIN_PD10__I2SMCC0_DIN2		PINMUX_PIN(PIN_PD10, 3, 2)
+#define PIN_PD10__D1			PINMUX_PIN(PIN_PD10, 4, 2)
+#define PIN_PD10__TCLK2			PINMUX_PIN(PIN_PD10, 5, 2)
+#define PIN_PD10__FLEXCOM0_IO0		PINMUX_PIN(PIN_PD10, 6, 3)
+#define PIN_PD11			107
+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__SDMMC2_1V8SEL		PINMUX_PIN(PIN_PD11, 1, 1)
+#define PIN_PD11__PCK7			PINMUX_PIN(PIN_PD11, 2, 2)
+#define PIN_PD11__I2SMCC0_DIN3		PINMUX_PIN(PIN_PD11, 3, 2)
+#define PIN_PD11__D2			PINMUX_PIN(PIN_PD11, 4, 2)
+#define PIN_PD11__TIOA3			PINMUX_PIN(PIN_PD11, 5, 2)
+#define PIN_PD11__FLEXCOM0_IO1		PINMUX_PIN(PIN_PD11, 6, 3)
+#define PIN_PD12			108
+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__PCK1			PINMUX_PIN(PIN_PD12, 1, 2)
+#define PIN_PD12__FLEXCOM1_IO0		PINMUX_PIN(PIN_PD12, 2, 2)
+#define PIN_PD12__CANTX0		PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__TIOB3			PINMUX_PIN(PIN_PD12, 5, 2)
+#define PIN_PD13			109
+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__I2SMCC0_CK		PINMUX_PIN(PIN_PD13, 1, 2)
+#define PIN_PD13__FLEXCOM1_IO1		PINMUX_PIN(PIN_PD13, 2, 2)
+#define PIN_PD13__PWML0			PINMUX_PIN(PIN_PD13, 3, 4)
+#define PIN_PD13__CANRX0		PINMUX_PIN(PIN_PD13, 4, 2)
+#define PIN_PD13__TCLK3			PINMUX_PIN(PIN_PD13, 5, 2)
+#define PIN_PD14			110
+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__I2SMCC0_MCK		PINMUX_PIN(PIN_PD14, 1, 2)
+#define PIN_PD14__FLEXCOM1_IO2		PINMUX_PIN(PIN_PD14, 2, 2)
+#define PIN_PD14__PWMH0			PINMUX_PIN(PIN_PD14, 3, 4)
+#define PIN_PD14__CANTX1		PINMUX_PIN(PIN_PD14, 4, 2)
+#define PIN_PD14__TIOA4			PINMUX_PIN(PIN_PD14, 5, 2)
+#define PIN_PD14__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD14, 6, 5)
+#define PIN_PD15			111
+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__I2SMCC0_WS		PINMUX_PIN(PIN_PD15, 1, 2)
+#define PIN_PD15__FLEXCOM1_IO3		PINMUX_PIN(PIN_PD15, 2, 2)
+#define PIN_PD15__PWML1			PINMUX_PIN(PIN_PD15, 3, 4)
+#define PIN_PD15__CANRX1		PINMUX_PIN(PIN_PD15, 4, 2)
+#define PIN_PD15__TIOB4			PINMUX_PIN(PIN_PD15, 5, 2)
+#define PIN_PD15__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD15, 6, 5)
+#define PIN_PD16			112
+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__I2SMCC0_DOUT0		PINMUX_PIN(PIN_PD16, 1, 2)
+#define PIN_PD16__FLEXCOM1_IO4		PINMUX_PIN(PIN_PD16, 2, 2)
+#define PIN_PD16__PWMH1			PINMUX_PIN(PIN_PD16, 3, 4)
+#define PIN_PD16__CANTX2		PINMUX_PIN(PIN_PD16, 4, 2)
+#define PIN_PD16__TCLK4			PINMUX_PIN(PIN_PD16, 5, 2)
+#define PIN_PD16__FLEXCOM3_IO0		PINMUX_PIN(PIN_PD16, 6, 5)
+#define PIN_PD17			113
+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__I2SMCC0_DOUT1		PINMUX_PIN(PIN_PD17, 1, 2)
+#define PIN_PD17__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD17, 2, 2)
+#define PIN_PD17__PWML2			PINMUX_PIN(PIN_PD17, 3, 4)
+#define PIN_PD17__CANRX2		PINMUX_PIN(PIN_PD17, 4, 2)
+#define PIN_PD17__TIOA5			PINMUX_PIN(PIN_PD17, 5, 2)
+#define PIN_PD17__FLEXCOM3_IO1		PINMUX_PIN(PIN_PD17, 6, 5)
+#define PIN_PD18			114
+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__I2SMCC0_DOUT2		PINMUX_PIN(PIN_PD18, 1, 2)
+#define PIN_PD18__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD18, 2, 2)
+#define PIN_PD18__PWMH2			PINMUX_PIN(PIN_PD18, 3, 4)
+#define PIN_PD18__CANTX3		PINMUX_PIN(PIN_PD18, 4, 2)
+#define PIN_PD18__TIOB5			PINMUX_PIN(PIN_PD18, 5, 2)
+#define PIN_PD18__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD18, 6, 5)
+#define PIN_PD19			115
+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__I2SMCC0_DOUT3		PINMUX_PIN(PIN_PD19, 1, 2)
+#define PIN_PD19__FLEXCOM2_IO2		PINMUX_PIN(PIN_PD19, 2, 2)
+#define PIN_PD19__PWML3			PINMUX_PIN(PIN_PD19, 3, 4)
+#define PIN_PD19__CANRX3		PINMUX_PIN(PIN_PD19, 4, 2)
+#define PIN_PD19__TCLK5			PINMUX_PIN(PIN_PD19, 5, 2)
+#define PIN_PD19__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD19, 6, 5)
+#define PIN_PD20			116
+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__PCK0			PINMUX_PIN(PIN_PD20, 1, 3)
+#define PIN_PD20__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD20, 2, 2)
+#define PIN_PD20__PWMH3			PINMUX_PIN(PIN_PD20, 3, 4)
+#define PIN_PD20__CANTX4		PINMUX_PIN(PIN_PD20, 4, 2)
+#define PIN_PD20__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD20, 6, 5)
+#define PIN_PD21			117
+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__PCK1			PINMUX_PIN(PIN_PD21, 1, 3)
+#define PIN_PD21__FLEXCOM2_IO4		PINMUX_PIN(PIN_PD21, 2, 2)
+#define PIN_PD21__CANRX4		PINMUX_PIN(PIN_PD21, 4, 2)
+#define PIN_PD21__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD21, 6, 5)
+#define PIN_PD21__G1_TXEN		PINMUX_PIN(PIN_PD21, 7, 1)
+#define PIN_PD22			118
+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__PDMC0_CLK		PINMUX_PIN(PIN_PD22, 1, 2)
+#define PIN_PD22__PWMEXTRG0		PINMUX_PIN(PIN_PD22, 3, 4)
+#define PIN_PD22__RD1			PINMUX_PIN(PIN_PD22, 4, 2)
+#define PIN_PD22__CANTX5		PINMUX_PIN(PIN_PD22, 6, 2)
+#define PIN_PD22__G1_TX0		PINMUX_PIN(PIN_PD22, 7, 1)
+#define PIN_PD23			119
+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__PDMC0_DS0		PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD23__PWMEXTRG1		PINMUX_PIN(PIN_PD23, 3, 4)
+#define PIN_PD23__RF1			PINMUX_PIN(PIN_PD23, 4, 2)
+#define PIN_PD23__ISC_MCK		PINMUX_PIN(PIN_PD23, 5, 2)
+#define PIN_PD23__CANRX5		PINMUX_PIN(PIN_PD23, 6, 2)
+#define PIN_PD23__G1_TX1		PINMUX_PIN(PIN_PD23, 7, 1)
+#define PIN_PD24			120
+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__PDMC0_DS1		PINMUX_PIN(PIN_PD24, 1, 2)
+#define PIN_PD24__PWMFI0		PINMUX_PIN(PIN_PD24, 3, 4)
+#define PIN_PD24__RK1			PINMUX_PIN(PIN_PD24, 4, 2)
+#define PIN_PD24__ISC_D0		PINMUX_PIN(PIN_PD24, 5, 2)
+#define PIN_PD24__G1_RXDV		PINMUX_PIN(PIN_PD24, 7, 1)
+#define PIN_PD25			121
+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__PDMC1_CLK		PINMUX_PIN(PIN_PD25, 1, 2)
+#define PIN_PD25__FLEXCOM5_IO0		PINMUX_PIN(PIN_PD25, 2, 2)
+#define PIN_PD25__PWMFI1		PINMUX_PIN(PIN_PD25, 3, 4)
+#define PIN_PD25__TD1			PINMUX_PIN(PIN_PD25, 4, 2)
+#define PIN_PD25__ISC_D1		PINMUX_PIN(PIN_PD25, 5, 2)
+#define PIN_PD25__G1_RX0		PINMUX_PIN(PIN_PD25, 7, 1)
+#define PIN_PD26			122
+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__PDMC1_DS0		PINMUX_PIN(PIN_PD26, 1, 2)
+#define PIN_PD26__FLEXCOM5_IO1		PINMUX_PIN(PIN_PD26, 2, 2)
+#define PIN_PD26__ADTRG			PINMUX_PIN(PIN_PD26, 3, 3)
+#define PIN_PD26__TF1			PINMUX_PIN(PIN_PD26, 4, 2)
+#define PIN_PD26__ISC_D2		PINMUX_PIN(PIN_PD26, 5, 2)
+#define PIN_PD26__G1_RX1		PINMUX_PIN(PIN_PD26, 7, 1)
+#define PIN_PD27			123
+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__PDMC1_DS1		PINMUX_PIN(PIN_PD27, 1, 2)
+#define PIN_PD27__FLEXCOM5_IO2		PINMUX_PIN(PIN_PD27, 2, 2)
+#define PIN_PD27__TIOA0			PINMUX_PIN(PIN_PD27, 3, 3)
+#define PIN_PD27__TK1			PINMUX_PIN(PIN_PD27, 4, 2)
+#define PIN_PD27__ISC_D3		PINMUX_PIN(PIN_PD27, 5, 2)
+#define PIN_PD27__G1_RXER		PINMUX_PIN(PIN_PD27, 7, 1)
+#define PIN_PD28			124
+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__RD0			PINMUX_PIN(PIN_PD28, 1, 2)
+#define PIN_PD28__FLEXCOM5_IO3		PINMUX_PIN(PIN_PD28, 2, 2)
+#define PIN_PD28__TIOB0			PINMUX_PIN(PIN_PD28, 3, 3)
+#define PIN_PD28__I2SMCC1_CK		PINMUX_PIN(PIN_PD28, 4, 2)
+#define PIN_PD28__ISC_D4		PINMUX_PIN(PIN_PD28, 5, 2)
+#define PIN_PD28__PWML3			PINMUX_PIN(PIN_PD28, 6, 5)
+#define PIN_PD28__G1_MDC		PINMUX_PIN(PIN_PD28, 7, 1)
+#define PIN_PD29			125
+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__RF0			PINMUX_PIN(PIN_PD29, 1, 2)
+#define PIN_PD29__FLEXCOM5_IO4		PINMUX_PIN(PIN_PD29, 2, 2)
+#define PIN_PD29__TCLK0			PINMUX_PIN(PIN_PD29, 3, 3)
+#define PIN_PD29__I2SMCC1_WS		PINMUX_PIN(PIN_PD29, 4, 2)
+#define PIN_PD29__ISC_D5		PINMUX_PIN(PIN_PD29, 5, 2)
+#define PIN_PD29__PWMH3			PINMUX_PIN(PIN_PD29, 6, 5)
+#define PIN_PD29__G1_MDIO		PINMUX_PIN(PIN_PD29, 7, 1)
+#define PIN_PD30			126
+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__RK0			PINMUX_PIN(PIN_PD30, 1, 2)
+#define PIN_PD30__FLEXCOM6_IO0		PINMUX_PIN(PIN_PD30, 2, 2)
+#define PIN_PD30__TIOA1			PINMUX_PIN(PIN_PD30, 3, 3)
+#define PIN_PD30__I2SMCC1_MCK		PINMUX_PIN(PIN_PD30, 4, 2)
+#define PIN_PD30__ISC_D6		PINMUX_PIN(PIN_PD30, 5, 2)
+#define PIN_PD30__PWMEXTRG0		PINMUX_PIN(PIN_PD30, 6, 5)
+#define PIN_PD30__G1_TXCK		PINMUX_PIN(PIN_PD30, 7, 1)
+#define PIN_PD31			127
+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__TD0			PINMUX_PIN(PIN_PD31, 1, 2)
+#define PIN_PD31__FLEXCOM6_IO1		PINMUX_PIN(PIN_PD31, 2, 2)
+#define PIN_PD31__TIOB1			PINMUX_PIN(PIN_PD31, 3, 3)
+#define PIN_PD31__I2SMCC1_DOUT0		PINMUX_PIN(PIN_PD31, 4, 2)
+#define PIN_PD31__ISC_D7		PINMUX_PIN(PIN_PD31, 5, 2)
+#define PIN_PD31__PWM_EXTRG1		PINMUX_PIN(PIN_PD31, 6, 5)
+#define PIN_PD31__G1_TX2		PINMUX_PIN(PIN_PD31, 7, 1)
+#define PIN_PE0				128
+#define PIN_PE0__GPIO			PINMUX_PIN(PIN_PE0, 0, 0)
+#define PIN_PE0__TF0			PINMUX_PIN(PIN_PE0, 1, 2)
+#define PIN_PE0__FLEXCOM6_IO2		PINMUX_PIN(PIN_PE0, 2, 2)
+#define PIN_PE0__TCLK1			PINMUX_PIN(PIN_PE0, 3, 3)
+#define PIN_PE0__I2SMCC1_DOUT1		PINMUX_PIN(PIN_PE0, 4, 2)
+#define PIN_PE0__ISC_HSYNC		PINMUX_PIN(PIN_PE0, 5, 2)
+#define PIN_PE0__PWMFI0			PINMUX_PIN(PIN_PE0, 6, 5)
+#define PIN_PE0__G1_TX3			PINMUX_PIN(PIN_PE0, 7, 1)
+#define PIN_PE1				129
+#define PIN_PE1__GPIO			PINMUX_PIN(PIN_PE1, 0, 0)
+#define PIN_PE1__TK0			PINMUX_PIN(PIN_PE1, 1, 2)
+#define PIN_PE1__FLEXCOM6_IO3		PINMUX_PIN(PIN_PE1, 2, 2)
+#define PIN_PE1__TIOA2			PINMUX_PIN(PIN_PE1, 3, 3)
+#define PIN_PE1__I2SMCC1_DOUT2		PINMUX_PIN(PIN_PE1, 4, 2)
+#define PIN_PE1__ISC_VSYNC		PINMUX_PIN(PIN_PE1, 5, 2)
+#define PIN_PE1__PWMFI1			PINMUX_PIN(PIN_PE1, 6, 5)
+#define PIN_PE1__G1_RX2			PINMUX_PIN(PIN_PE1, 7, 1)
+#define PIN_PE2				130
+#define PIN_PE2__GPIO			PINMUX_PIN(PIN_PE2, 0, 0)
+#define PIN_PE2__PWML0			PINMUX_PIN(PIN_PE2, 1, 5)
+#define PIN_PE2__FLEXCOM6_IO4		PINMUX_PIN(PIN_PE2, 2, 2)
+#define PIN_PE2__TIOB2			PINMUX_PIN(PIN_PE2, 3, 3)
+#define PIN_PE2__I2SMCC1_DOUT3		PINMUX_PIN(PIN_PE2, 4, 2)
+#define PIN_PE2__ISC_FIELD		PINMUX_PIN(PIN_PE2, 5, 2)
+#define PIN_PE2__G1_RX3			PINMUX_PIN(PIN_PE2, 7, 1)
+#define PIN_PE3				131
+#define PIN_PE3__GPIO			PINMUX_PIN(PIN_PE3, 0, 0)
+#define PIN_PE3__PWMH0			PINMUX_PIN(PIN_PE3, 1, 5)
+#define PIN_PE3__FLEXCOM0_IO0		PINMUX_PIN(PIN_PE3, 2, 4)
+#define PIN_PE3__TCLK2			PINMUX_PIN(PIN_PE3, 3, 3)
+#define PIN_PE3__I2SMCC1_DIN0		PINMUX_PIN(PIN_PE3, 4, 2)
+#define PIN_PE3__ISC_PCK		PINMUX_PIN(PIN_PE3, 5, 2)
+#define PIN_PE3__G1_RXCK		PINMUX_PIN(PIN_PE3, 7, 1)
+#define PIN_PE4				132
+#define PIN_PE4__GPIO			PINMUX_PIN(PIN_PE4, 0, 0)
+#define PIN_PE4__PWML1			PINMUX_PIN(PIN_PE4, 1, 5)
+#define PIN_PE4__FLEXCOM0_IO1		PINMUX_PIN(PIN_PE4, 2, 4)
+#define PIN_PE4__TIOA3			PINMUX_PIN(PIN_PE4, 3, 3)
+#define PIN_PE4__I2SMCC1_DIN1		PINMUX_PIN(PIN_PE4, 4, 2)
+#define PIN_PE4__ISC_D8			PINMUX_PIN(PIN_PE4, 5, 2)
+#define PIN_PE4__G1_TXER		PINMUX_PIN(PIN_PE4, 7, 1)
+#define PIN_PE5				133
+#define PIN_PE5__GPIO			PINMUX_PIN(PIN_PE5, 0, 0)
+#define PIN_PE5__PWMH1			PINMUX_PIN(PIN_PE5, 1, 5)
+#define PIN_PE5__FLEXCOM0_IO2		PINMUX_PIN(PIN_PE5, 2, 4)
+#define PIN_PE5__TIOB3			PINMUX_PIN(PIN_PE5, 3, 3)
+#define PIN_PE5__I2SMCC1_DIN2		PINMUX_PIN(PIN_PE5, 4, 2)
+#define PIN_PE5__ISC_D9			PINMUX_PIN(PIN_PE5, 5, 2)
+#define PIN_PE5__G1_COL			PINMUX_PIN(PIN_PE5, 7, 1)
+#define PIN_PE6				134
+#define PIN_PE6__GPIO			PINMUX_PIN(PIN_PE6, 0, 0)
+#define PIN_PE6__PWML2			PINMUX_PIN(PIN_PE6, 1, 5)
+#define PIN_PE6__FLEXCOM0_IO3		PINMUX_PIN(PIN_PE6, 2, 4)
+#define PIN_PE6__TCLK3			PINMUX_PIN(PIN_PE6, 3, 3)
+#define PIN_PE6__I2SMCC1_DIN3		PINMUX_PIN(PIN_PE6, 4, 2)
+#define PIN_PE6__ISC_D10		PINMUX_PIN(PIN_PE6, 5, 2)
+#define PIN_PE6__G1_CRS			PINMUX_PIN(PIN_PE6, 7, 1)
+#define PIN_PE7				135
+#define PIN_PE7__GPIO			PINMUX_PIN(PIN_PE7, 0, 0)
+#define PIN_PE7__PWMH2			PINMUX_PIN(PIN_PE7, 1, 5)
+#define PIN_PE7__FLEXCOM0_IO4		PINMUX_PIN(PIN_PE7, 2, 4)
+#define PIN_PE7__TIOA4			PINMUX_PIN(PIN_PE7, 3, 3)
+#define PIN_PE7__ISC_D11		PINMUX_PIN(PIN_PE7, 5, 2)
+#define PIN_PE7__G1_TSUCOMP		PINMUX_PIN(PIN_PE7, 7, 1)
diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
new file mode 100644
index 000000000000..929ba73702e9
--- /dev/null
+++ b/arch/arm/boot/dts/sama7g5.dtsi
@@ -0,0 +1,1016 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC
+ *
+ *  Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries
+ *
+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	model = "Microchip SAMA7G5 family SoC";
+	compatible = "microchip,sama7g5";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-90000000 {
+			opp-hz = /bits/ 64 <90000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+			opp-suspend;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1150000 1125000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-1000000002 {
+			opp-hz = /bits/ 64 <1000000002>;
+			opp-microvolt = <1250000 1225000 1300000>;
+			clock-latency-ns = <320000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&thermal_sensor>;
+
+			trips {
+				cpu_normal: cpu-alert0 {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_hot: cpu-alert1 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_normal>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		usb_clk: usb_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+		};
+	};
+
+	vddout25: fixed-regulator-vddout25 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDOUT25";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		status = "disabled";
+	};
+
+	ns_sram: sram@100000 {
+		compatible = "mmio-sram";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x100000 0x20000>;
+		ranges;
+	};
+
+	thermal_sensor: thermal-sensor {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc AT91_SAMA7G5_ADC_TEMP_CHANNEL>;
+		io-channel-names = "sensor-channel";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nfc_sram: sram@600000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x00600000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00600000 0x2400>;
+		};
+
+		nfc_io: nfc-io@10000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0x10000000 0x8000000>;
+		};
+
+		ebi: ebi@40000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x40000000 0x20000000>;
+			ranges = <0x0 0x0 0x40000000 0x8000000
+				  0x1 0x0 0x48000000 0x8000000
+				  0x2 0x0 0x50000000 0x8000000
+				  0x3 0x0 0x58000000 0x8000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK1>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		securam: sram@e0000000 {
+			compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
+			reg = <0xe0000000 0x4000>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xe0000000 0x4000>;
+			no-memory-wc;
+		};
+
+		secumod: secumod@e0004000 {
+			compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
+			reg = <0xe0004000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		sfrbu: sfr@e0008000 {
+			compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
+			reg = <0xe0008000 0x20>;
+		};
+
+		pioA: pinctrl@e0014000 {
+			compatible = "microchip,sama7g5-pinctrl";
+			reg = <0xe0014000 0x800>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+		};
+
+		pmc: pmc@e0018000 {
+			compatible = "microchip,sama7g5-pmc", "syscon";
+			reg = <0xe0018000 0x200>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#clock-cells = <2>;
+			clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+			clock-names = "td_slck", "md_slck", "main_xtal";
+		};
+
+		reset_controller: reset-controller@e001d000 {
+			compatible = "microchip,sama7g5-rstc";
+			reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clk32k 0>;
+		};
+
+		shdwc: shdwc@e001d010 {
+			compatible = "microchip,sama7g5-shdwc", "syscon";
+			reg = <0xe001d010 0x10>;
+			clocks = <&clk32k 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			atmel,wakeup-rtc-timer;
+			atmel,wakeup-rtt-timer;
+			status = "disabled";
+		};
+
+		rtt: rtc@e001d020 {
+			compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
+			reg = <0xe001d020 0x30>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		clk32k: clock-controller@e001d050 {
+			compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc";
+			reg = <0xe001d050 0x4>;
+			clocks = <&slow_xtal>;
+			#clock-cells = <1>;
+		};
+
+		gpbr: gpbr@e001d060 {
+			compatible = "microchip,sama7g5-gpbr", "syscon";
+			reg = <0xe001d060 0x48>;
+		};
+
+		rtc: rtc@e001d0a8 {
+			compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc";
+			reg = <0xe001d0a8 0x30>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 1>;
+		};
+
+		ps_wdt: watchdog@e001d180 {
+			compatible = "microchip,sama7g5-wdt";
+			reg = <0xe001d180 0x24>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk32k 0>;
+		};
+
+		chipid@e0020000 {
+			compatible = "microchip,sama7g5-chipid";
+			reg = <0xe0020000 0x8>;
+		};
+
+		tcb1: timer@e0800000 {
+			compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe0800000 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>;
+			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+		};
+
+		hsmc: hsmc@e0808000 {
+			compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+			reg = <0xe0808000 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pmecc: ecc-engine@e0808070 {
+				compatible = "atmel,sama5d2-pmecc";
+				reg = <0xe0808070 0x490>,
+				      <0xe0808500 0x200>;
+			};
+		};
+
+		qspi0: spi@e080c000 {
+			compatible = "microchip,sama7g5-ospi";
+			reg = <0xe080c000 0x400>, <0x20000000 0x10000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(41)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(40)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 78>, <&pmc PMC_TYPE_GCK 78>;
+			clock-names = "pclk", "gclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi1: spi@e0810000 {
+			compatible = "microchip,sama7g5-qspi";
+			reg = <0xe0810000 0x400>, <0x30000000 0x10000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(43)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(42)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 79>, <&pmc PMC_TYPE_GCK 79>;
+			clock-names = "pclk", "gclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e0828000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0828000 0x100>, <0x100000 0x7800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e082c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe082c000 0x100>, <0x100000 0xbc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can2: can@e0830000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0830000 0x100>, <0x100000 0x10000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 63>, <&pmc PMC_TYPE_GCK 63>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 63>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can3: can@e0834000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0834000 0x100>, <0x110000 0x4400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 64>, <&pmc PMC_TYPE_GCK 64>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 64>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can4: can@e0838000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0838000 0x100>, <0x110000 0x8800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 65>, <&pmc PMC_TYPE_GCK 65>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 65>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can5: can@e083c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe083c000 0x100>, <0x110000 0xcc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 66>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x8800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		adc: adc@e1000000 {
+			compatible = "microchip,sama7g5-adc";
+			reg = <0xe1000000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+			assigned-clock-rates = <100000000>;
+			clock-names = "adc_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>;
+			dma-names = "rx";
+			atmel,min-sample-rate-hz = <200000>;
+			atmel,max-sample-rate-hz = <20000000>;
+			atmel,startup-time-ms = <4>;
+			#io-channel-cells = <1>;
+			nvmem-cells = <&temperature_calib>;
+			nvmem-cell-names = "temperature_calib";
+			status = "disabled";
+		};
+
+		sdmmc0: mmc@e1204000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1204000 0x4000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 80>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@e1208000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe1208000 0x4000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 81>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		sdmmc2: mmc@e120c000 {
+			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+			reg = <0xe120c000 0x4000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>;
+			clock-names = "hclock", "multclk";
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 82>;
+			assigned-clock-rates = <200000000>;
+			microchip,sdcal-inverted;
+			status = "disabled";
+		};
+
+		csi2dc: csi2dc@e1404000 {
+			compatible = "microchip,sama7g5-csi2dc";
+			reg = <0xe1404000 0x500>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&xisc>;
+			clock-names = "pclk", "scck";
+			assigned-clocks = <&xisc>;
+			assigned-clock-rates = <266000000>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					csi2dc_in: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					csi2dc_out: endpoint {
+						bus-width = <14>;
+						hsync-active = <1>;
+						vsync-active = <1>;
+						remote-endpoint = <&xisc_in>;
+					};
+				};
+			};
+		};
+
+		xisc: xisc@e1408000 {
+			compatible = "microchip,sama7g5-isc";
+			reg = <0xe1408000 0x2000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+			clock-names = "hclock";
+			#clock-cells = <0>;
+			clock-output-names = "isc-mck";
+			status = "disabled";
+
+			port {
+				xisc_in: endpoint {
+					bus-type = <5>; /* Parallel */
+					bus-width = <14>;
+					hsync-active = <1>;
+					vsync-active = <1>;
+					remote-endpoint = <&csi2dc_out>;
+				};
+			};
+		};
+
+		pwm: pwm@e1604000 {
+			compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
+			reg = <0xe1604000 0x4000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			#pwm-cells = <3>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 77>;
+			status = "disabled";
+		};
+
+		pdmc0: sound@e1608000 {
+			compatible = "microchip,sama7g5-pdmc";
+			reg = <0xe1608000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			#sound-dai-cells = <0>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		pdmc1: sound@e160c000 {
+			compatible = "microchip,sama7g5-pdmc";
+			reg = <0xe160c000 0x1000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			#sound-dai-cells = <0>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(38)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 69>, <&pmc PMC_TYPE_GCK 69>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		spdifrx: spdifrx@e1614000 {
+			#sound-dai-cells = <0>;
+			compatible = "microchip,sama7g5-spdifrx";
+			reg = <0xe1614000 0x4000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
+			dma-names = "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		spdiftx: spdiftx@e1618000 {
+			#sound-dai-cells = <0>;
+			compatible = "microchip,sama7g5-spdiftx";
+			reg = <0xe1618000 0x4000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
+			dma-names = "tx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
+			clock-names = "pclk", "gclk";
+		};
+
+		i2s0: i2s@e161c000 {
+			compatible = "microchip,sama7g5-i2smcc";
+			#sound-dai-cells = <0>;
+			reg = <0xe161c000 0x4000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		i2s1: i2s@e1620000 {
+			compatible = "microchip,sama7g5-i2smcc";
+			#sound-dai-cells = <0>;
+			reg = <0xe1620000 0x4000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+			clock-names = "pclk", "gclk";
+			status = "disabled";
+		};
+
+		eic: interrupt-controller@e1628000 {
+			compatible = "microchip,sama7g5-eic";
+			reg = <0xe1628000 0xec>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+			clock-names = "pclk";
+			status = "disabled";
+		};
+
+		pit64b0: timer@e1800000 {
+			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1800000 0x4000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>;
+			clock-names = "pclk", "gclk";
+		};
+
+		pit64b1: timer@e1804000 {
+			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
+			reg = <0xe1804000 0x4000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>;
+			clock-names = "pclk", "gclk";
+		};
+
+		aes: crypto@e1810000 {
+			compatible = "atmel,at91sam9g46-aes";
+			reg = <0xe1810000 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+			clock-names = "aes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+			dma-names = "tx", "rx";
+		};
+
+		sha: crypto@e1814000 {
+			compatible = "atmel,at91sam9g46-sha";
+			reg = <0xe1814000 0x100>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
+			clock-names = "sha_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+			dma-names = "tx";
+		};
+
+		flx0: flexcom@e1818000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe1818000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe1818000 0x800>;
+			status = "disabled";
+
+			uart0: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
+					<&dma1 AT91_XDMAC_DT_PERID(5)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		flx1: flexcom@e181c000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe181c000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe181c000 0x800>;
+			status = "disabled";
+
+			i2c1: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>,
+					<&dma0 AT91_XDMAC_DT_PERID(7)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx3: flexcom@e1824000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe1824000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe1824000 0x800>;
+			status = "disabled";
+
+			uart3: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
+					<&dma1 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+
+		trng: rng@e2010000 {
+			compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng";
+			reg = <0xe2010000 0x100>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 97>;
+			status = "disabled";
+		};
+
+		tdes: crypto@e2014000 {
+			compatible = "atmel,at91sam9g46-tdes";
+			reg = <0xe2014000 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
+			clock-names = "tdes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(53)>;
+			dma-names = "tx", "rx";
+		};
+
+		flx4: flexcom@e2018000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2018000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2018000 0x800>;
+			status = "disabled";
+
+			uart4: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
+					<&dma1 AT91_XDMAC_DT_PERID(13)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		flx7: flexcom@e2024000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2024000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2024000 0x800>;
+			status = "disabled";
+
+			uart7: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
+				clock-names = "usart";
+				dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
+					<&dma1 AT91_XDMAC_DT_PERID(19)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+		};
+
+		gmac0: ethernet@e2800000 {
+			compatible = "microchip,sama7g5-gem";
+			reg = <0xe2800000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>;
+			clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
+			assigned-clock-rates = <125000000>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@e2804000 {
+			compatible = "microchip,sama7g5-emac";
+			reg = <0xe2804000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		dma0: dma-controller@e2808000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe2808000 0x1000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		dma1: dma-controller@e280c000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe280c000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+			clock-names = "dma_clk";
+			status = "disabled";
+		};
+
+		/* Place dma2 here despite it's address */
+		dma2: dma-controller@e1200000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe1200000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+			clock-names = "dma_clk";
+			dma-requests = <0>;
+			status = "disabled";
+		};
+
+		tcb0: timer@e2814000 {
+			compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe2814000 0x100>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>;
+			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+		};
+
+		flx8: flexcom@e2818000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2818000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2818000 0x800>;
+			status = "disabled";
+
+			i2c8: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>,
+					<&dma0 AT91_XDMAC_DT_PERID(21)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx9: flexcom@e281c000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe281c000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe281c000 0x800>;
+			status = "disabled";
+
+			i2c9: i2c@600 {
+				compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+				reg = <0x600 0x200>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>,
+					<&dma0 AT91_XDMAC_DT_PERID(23)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		flx11: flexcom@e2824000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe2824000 0x200>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe2824000 0x800>;
+			status = "disabled";
+
+			spi11: spi@400 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0x400 0x200>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
+				clock-names = "spi_clk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,fifo-size = <32>;
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>,
+					    <&dma0 AT91_XDMAC_DT_PERID(27)>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		uddrc: uddrc@e3800000 {
+			compatible = "microchip,sama7g5-uddrc";
+			reg = <0xe3800000 0x4000>;
+		};
+
+		ddr3phy: ddr3phy@e3804000 {
+			compatible = "microchip,sama7g5-ddr3phy";
+			reg = <0xe3804000 0x1000>;
+		};
+
+		otpc: efuse@e8c00000 {
+			compatible = "microchip,sama7g5-otpc", "syscon";
+			reg = <0xe8c00000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			temperature_calib: calib@1 {
+				reg = <OTP_PKT(1) 76>;
+			};
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0xe8c11000 0x1000>,
+				<0xe8c12000 0x2000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sd5203.dts b/arch/arm/boot/dts/sd5203.dts
index 3cc9a23910be..69381819e07b 100644
--- a/arch/arm/boot/dts/sd5203.dts
+++ b/arch/arm/boot/dts/sd5203.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2020 Hisilicon Limited.
+ * Copyright (c) 2020 HiSilicon Limited.
  *
  * DTS file for Hisilicon SD5203 Board
  */
@@ -15,7 +15,7 @@
 	#size-cells = <1>;
 
 	chosen {
-		bootargs="console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
+		bootargs = "console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
 	};
 
 	aliases {
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index 5a8d92a061df..98897f710063 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -169,7 +169,7 @@
 
 &bsc {
 	ethernet@10000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
+		compatible = "smsc,lan9221", "smsc,lan9115";
 		reg = <0x10000000 0x100>;
 		phy-mode = "mii";
 		interrupt-parent = <&irqpin0>;
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 0b021eef0b53..4c1d140f40f8 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -46,7 +46,7 @@
 		      <0xff113000 0x1000>;
 	};
 
-	intc: intc@fffed000 {
+	intc: interrupt-controller@fffed000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -80,8 +80,6 @@
 					     <0 110 4>,
 					     <0 111 4>;
 				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
 				clocks = <&l4_main_clk>;
 				clock-names = "apb_pclk";
 				resets = <&rst DMA_RESET>;
@@ -455,7 +453,6 @@
 						compatible = "altr,socfpga-gate-clk";
 						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
 						clk-gate = <0xa0 8>;
-						clk-phase = <0 135>;
 					};
 
 					sdmmc_clk_divided: sdmmc_clk_divided {
@@ -563,6 +560,12 @@
 			interrupts = <0 175 4>;
 		};
 
+		socfpga_axi_setup: stmmac-axi-config {
+			snps,wr_osr_lmt = <0xf>;
+			snps,rd_osr_lmt = <0xf>;
+			snps,blen = <0 0 0 0 16 0 0>;
+		};
+
 		gmac0: ethernet@ff700000 {
 			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
 			altr,sysmgr-syscon = <&sysmgr 0x60 0>;
@@ -578,6 +581,7 @@
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <4096>;
+			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
 
@@ -596,6 +600,7 @@
 			snps,perfect-filter-entries = <128>;
 			tx-fifo-depth = <4096>;
 			rx-fifo-depth = <4096>;
+			snps,axi-config = <&socfpga_axi_setup>;
 			status = "disabled";
 		};
 
@@ -744,12 +749,12 @@
 			arm,prefetch-offset = <7>;
 		};
 
-		l3regs@0xff800000 {
+		l3regs@ff800000 {
 			compatible = "altr,l3regs", "syscon";
 			reg = <0xff800000 0x1000>;
 		};
 
-		mmc: dwmmc0@ff704000 {
+		mmc: mmc@ff704000 {
 			compatible = "altr,socfpga-dw-mshc";
 			reg = <0xff704000 0x1000>;
 			interrupts = <0 139 4>;
@@ -759,6 +764,7 @@
 			clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
 			clock-names = "biu", "ciu";
 			resets = <&rst SDMMC_RESET>;
+			altr,sysmgr-syscon = <&sysmgr 0x108 3>;
 			status = "disabled";
 		};
 
@@ -782,7 +788,7 @@
 		};
 
 		qspi: spi@ff705000 {
-			compatible = "cdns,qspi-nor";
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xff705000 0x1000>,
@@ -899,7 +905,7 @@
 			reset-names = "timer";
 		};
 
-		uart0: serial0@ffc02000 {
+		uart0: serial@ffc02000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02000 0x1000>;
 			interrupts = <0 162 4>;
@@ -912,7 +918,7 @@
 			resets = <&rst UART0_RESET>;
 		};
 
-		uart1: serial1@ffc03000 {
+		uart1: serial@ffc03000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc03000 0x1000>;
 			interrupts = <0 163 4>;
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index a574ea91d9d3..72c55e5187ca 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -38,7 +38,7 @@
 		      <0xff113000 0x1000>;
 	};
 
-	intc: intc@ffffd000 {
+	intc: interrupt-controller@ffffd000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -73,8 +73,6 @@
 					     <0 90 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 91 IRQ_TYPE_LEVEL_HIGH>;
 				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
 				clocks = <&l4_main_clk>;
 				clock-names = "apb_pclk";
 				resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
@@ -367,7 +365,6 @@
 						compatible = "altr,socfpga-a10-gate-clk";
 						clocks = <&sdmmc_free_clk>;
 						clk-gate = <0xC8 5>;
-						clk-phase = <0 135>;
 					};
 
 					qspi_clk: qspi_clk {
@@ -658,7 +655,7 @@
 			arm,shared-override;
 		};
 
-		mmc: dwmmc0@ff808000 {
+		mmc: mmc@ff808000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-dw-mshc";
@@ -668,6 +665,7 @@
 			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
 			clock-names = "biu", "ciu";
 			resets = <&rst SDMMC_RESET>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
 			status = "disabled";
 		};
 
@@ -738,6 +736,16 @@
 					     <37 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
+			sdmmca-ecc@ff8c2c00 {
+				compatible = "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c2c00 0x400>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+					     <47 IRQ_TYPE_LEVEL_HIGH>,
+					     <16 IRQ_TYPE_LEVEL_HIGH>,
+					     <48 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			dma-ecc@ff8c8000 {
 				compatible = "altr,socfpga-dma-ecc";
 				reg = <0xff8c8000 0x400>;
@@ -756,7 +764,7 @@
 		};
 
 		qspi: spi@ff809000 {
-			compatible = "cdns,qspi-nor";
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xff809000 0x100>,
@@ -837,7 +845,7 @@
 			reset-names = "timer";
 		};
 
-		uart0: serial0@ffc02000 {
+		uart0: serial@ffc02000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02000 0x100>;
 			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -848,7 +856,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial1@ffc02100 {
+		uart1: serial@ffc02100 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02100 0x100>;
 			interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/socfpga_arria10_chameleonv3.dts b/arch/arm/boot/dts/socfpga_arria10_chameleonv3.dts
new file mode 100644
index 000000000000..422d00cd4c74
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria10_chameleonv3.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 Google LLC
+ */
+/dts-v1/;
+#include "socfpga_arria10_mercury_aa1.dtsi"
+
+/ {
+	model = "Google Chameleon V3";
+	compatible = "google,chameleon-v3", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		serial0 = &uart0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	ssm2603: audio-codec@1a {
+		compatible = "adi,ssm2603";
+		reg = <0x1a>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	u80: gpio@21 {
+		compatible = "nxp,pca9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SOM_AUD_MUTE",
+			"DP1_OUT_CEC_EN",
+			"DP2_OUT_CEC_EN",
+			"DP1_SOM_PS8469_CAD",
+			"DPD_SOM_PS8469_CAD",
+			"DP_OUT_PWR_EN",
+			"STM32_RST_L",
+			"STM32_BOOT0",
+
+			"FPGA_PROT",
+			"STM32_FPGA_COMM0",
+			"TP119",
+			"TP120",
+			"TP121",
+			"TP122",
+			"TP123",
+			"TP124";
+	};
+};
+
+&mmc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
new file mode 100644
index 000000000000..41f865c8c098
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2022 Google LLC
+ */
+
+#include "socfpga_arria10.dtsi"
+
+/ {
+
+	model = "Enclustra Mercury AA1";
+	compatible = "enclustra,mercury-aa1", "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial1 = &uart1;
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x80000000>; /* 2GB */
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-addr = <0xffffffff>; /* probe for phy addr */
+
+	max-frame-size = <3800>;
+
+	phy-handle = <&phy3>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy3: ethernet-phy@3 {
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <1860>; /* 960ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	atsha204a: crypto@64 {
+		compatible = "atmel,atsha204a";
+		reg = <0x64>;
+	};
+
+	isl12022: isl12022@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+};
+
+/* Following mappings are taken from arria10 socdk dts */
+&mmc {
+	cap-sd-highspeed;
+	broken-cd;
+	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
+};
+
+&osc1 {
+	clock-frequency = <33330000>;
+};
diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_pe1.dts b/arch/arm/boot/dts/socfpga_arria10_mercury_pe1.dts
new file mode 100644
index 000000000000..cf533f76a9fd
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria10_mercury_pe1.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2023 Steffen Trumtrar <kernel@pengutronix.de>
+ */
+/dts-v1/;
+#include "socfpga_arria10_mercury_aa1.dtsi"
+
+/ {
+	model = "Enclustra Mercury+ PE1";
+	compatible = "enclustra,mercury-pe1", "enclustra,mercury-aa1",
+		     "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&mmc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index 7edebe20e859..ec7365444a3b 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -6,7 +6,7 @@
 
 / {
 	model = "Altera SOCFPGA Arria 10";
-	compatible = "altr,socfpga-arria10", "altr,socfpga";
+	compatible = "altr,socfpga-arria10-socdk", "altr,socfpga-arria10", "altr,socfpga";
 
 	aliases {
 		ethernet0 = &gmac0;
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
index 9aa897b79544..a662df319a84 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts
@@ -16,11 +16,11 @@
 
 		partition@0 {
 			label = "Boot and fpga data";
-			reg = <0x0 0x02000000>;
+			reg = <0x0 0x02500000>;
 		};
 		partition@1c00000 {
 			label = "Root Filesystem - JFFS2";
-			reg = <0x02000000 0x06000000>;
+			reg = <0x02500000 0x05500000>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
index 2b645642b935..11ccdc6c2dc6 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
@@ -9,10 +9,10 @@
 &qspi {
 	status = "okay";
 
-	flash0: n25q00@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00aa";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
index 64dc0799f3d7..d3969367f4b5 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
@@ -12,6 +12,7 @@
 	cap-mmc-highspeed;
 	broken-cd;
 	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
 };
 
 &eccmgr {
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
index 22dbf07afcff..40fecde65c54 100644
--- a/arch/arm/boot/dts/socfpga_arria5.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -18,11 +18,12 @@
 			};
 		};
 
-		mmc0: dwmmc0@ff704000 {
+		mmc0: mmc@ff704000 {
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			clk-phase-sd-hs = <0>, <135>;
 		};
 
 		sysmgr@ffd08000 {
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 90e676e7019f..c48385702a85 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -7,7 +7,7 @@
 
 / {
 	model = "Altera SOCFPGA Arria V SoC Development Kit";
-	compatible = "altr,socfpga-arria5", "altr,socfpga";
+	compatible = "altr,socfpga-arria5-socdk", "altr,socfpga-arria5", "altr,socfpga";
 
 	chosen {
 		bootargs = "earlyprintk";
@@ -29,28 +29,28 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&porta 0 1>;
 		};
 
-		hps1 {
+		led-hps1 {
 			label = "hps_led1";
 			gpios = <&portb 11 1>;
 		};
 
-		hps2 {
+		led-hps2 {
 			label = "hps_led2";
 			gpios = <&porta 17 1>;
 		};
 
-		hps3 {
+		led-hps3 {
 			label = "hps_led3";
 			gpios = <&porta 18 1>;
 		};
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -119,7 +119,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
index 319a71e41ea4..305fe207b237 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -18,11 +18,12 @@
 			};
 		};
 
-		mmc0: dwmmc0@ff704000 {
+		mmc0: mmc@ff704000 {
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			clk-phase-sd-hs = <0>, <135>;
 		};
 
 		sysmgr@ffd08000 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts b/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
index f6561766d83f..76262f1e5e03 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
@@ -24,7 +24,7 @@
 		reg = <0x0 0x20000000>; /* 512MB */
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
index 67076e1b1c7f..bedf577cb056 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
@@ -24,7 +24,7 @@
 		ethernet0 = &gmac1;
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -33,7 +33,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&portb 24 0>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
index bd92806ffc12..3b9daddf91cd 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
@@ -18,5 +18,6 @@
 
 &mmc0 {	/* On-SoM eMMC */
 	bus-width = <8>;
+	clk-phase-sd-hs = <0>, <135>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 6f138b2b2616..c7f5fa0ba0f2 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -29,28 +29,28 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led-hps0 {
 			label = "hps_led0";
 			gpios = <&portb 15 1>;
 		};
 
-		hps1 {
+		led-hps1 {
 			label = "hps_led1";
 			gpios = <&portb 14 1>;
 		};
 
-		hps2 {
+		led-hps2 {
 			label = "hps_led2";
 			gpios = <&portb 13 1>;
 		};
 
-		hps3 {
+		led-hps3 {
 			label = "hps_led3";
 			gpios = <&portb 12 1>;
 		};
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -121,10 +121,10 @@
 &qspi {
 	status = "okay";
 
-	flash0: n25q00@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;	/* chip select */
 		spi-max-frequency = <100000000>;
 
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index c155ff02eb6e..3dd99c7c95e0 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -111,7 +111,7 @@
 		};
 	};
 
-	regulator_3_3v: vcc3p3-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3P3";
 		regulator-min-microvolt = <3300000>;
@@ -169,7 +169,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
index 8d5d3996f6f2..ca18b959e655 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -80,7 +80,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
index 99a71757cdf4..2564671fc1c6 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
@@ -26,7 +26,7 @@
 		ethernet0 = &gmac1;
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -113,10 +113,10 @@
 &qspi {
 	status = "okay";
 
-	flash0: n25q512a@0 {
+	flash0: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q512a";
+		compatible = "micron,n25q512a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
index a060718758b6..e0630b0eed03 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -141,7 +141,7 @@
 		reg = <0x50>;
 	};
 
-	i2cswitch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -221,10 +221,10 @@
 &qspi {
 	status = "okay";
 
-	n25q128@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q128";
+		compatible = "micron,n25q128", "jedec,spi-nor";
 		reg = <0>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
@@ -238,10 +238,10 @@
 		cdns,tslch-ns = <4>;
 	};
 
-	n25q00@1 {
+	flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <1>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
index a77846f73b34..845ab2cc5ce6 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -29,7 +29,7 @@
 			};
 		};
 
-		dwmmc0@ff704000 {
+		mmc@ff704000 {
 			broken-cd;
 			bus-width = <4>;
 			cap-mmc-highspeed;
@@ -57,11 +57,11 @@
 			clock-frequency = <7000000>;
 		};
 
-		serial0@ffc02000 {
+		serial@ffc02000 {
 			clock-frequency = <7372800>;
 		};
 
-		serial1@ffc03000 {
+		serial@ffc03000 {
 			clock-frequency = <7372800>;
 		};
 
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index 8fcb6be6e7c7..05408df38203 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -170,7 +170,7 @@
 
 		smi: flash@ea000000 {
 			status = "okay";
-			clock-rate=<50000000>;
+			clock-rate = <50000000>;
 
 			flash@e6000000 {
 				#address-cells = <1>;
@@ -379,7 +379,7 @@
 					};
 				};
 
-				m25p80@1 {
+				flash@1 {
 					compatible = "st,m25p80";
 					reg = <1>;
 					spi-max-frequency = <12000000>;
@@ -395,22 +395,6 @@
 					pl022,wait-state = <0>;
 					pl022,duplex = <0>;
 				};
-
-				spidev@2 {
-					compatible = "spidev";
-					reg = <2>;
-					spi-max-frequency = <25000000>;
-					spi-cpha;
-					pl022,hierarchy = <0>;
-					pl022,interface = <0>;
-					pl022,slave-tx-disable;
-					pl022,com-mode = <0x2>;
-					pl022,rx-level-trig = <0>;
-					pl022,tx-level-trig = <0>;
-					pl022,ctrl-len = <0x11>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-				};
 			};
 
 			wdt@ec800620 {
diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
index c4b49baf9804..2f746a9428a7 100644
--- a/arch/arm/boot/dts/spear1310.dtsi
+++ b/arch/arm/boot/dts/spear1310.dtsi
@@ -82,8 +82,6 @@
 			reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
 			reg-names = "dbi", "config";
 			interrupts = <0 68 0x4>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0x0 0 &gic 0 68 0x4>;
 			num-lanes = <1>;
 			phys = <&miphy0 1>;
 			phy-names = "pcie-phy";
@@ -101,8 +99,6 @@
 			reg = <0xb1800000 0x4000>, <0x90000000 0x20000>;
 			reg-names = "dbi", "config";
 			interrupts = <0 69 0x4>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0x0 0 &gic 0 69 0x4>;
 			num-lanes = <1>;
 			phys = <&miphy1 1>;
 			phy-names = "pcie-phy";
@@ -120,8 +116,6 @@
 			reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>;
 			reg-names = "dbi", "config";
 			interrupts = <0 70 0x4>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0x0 0 &gic 0 70 0x4>;
 			num-lanes = <1>;
 			phys = <&miphy2 1>;
 			phy-names = "pcie-phy";
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index f70ff56d4542..7700f2afc128 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -168,7 +168,7 @@
 
 		smi: flash@ea000000 {
 			status = "okay";
-			clock-rate=<50000000>;
+			clock-rate = <50000000>;
 
 			flash@e6000000 {
 				#address-cells = <1>;
@@ -439,7 +439,7 @@
 				cs-gpios = <&gpiopinctrl 80 0>, <&gpiopinctrl 24 0>,
 					   <&gpiopinctrl 85 0>;
 
-				m25p80@0 {
+				flash@0 {
 					compatible = "m25p80";
 					reg = <0>;
 					spi-max-frequency = <12000000>;
@@ -489,22 +489,6 @@
 						ts,i-drive = <1>;
 					};
 				};
-
-				spidev@2 {
-					compatible = "spidev";
-					reg = <2>;
-					spi-max-frequency = <25000000>;
-					spi-cpha;
-					pl022,hierarchy = <0>;
-					pl022,interface = <0>;
-					pl022,slave-tx-disable;
-					pl022,com-mode = <0x2>;
-					pl022,rx-level-trig = <0>;
-					pl022,tx-level-trig = <0>;
-					pl022,ctrl-len = <0x11>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-				};
 			};
 
 			timer@ec800600 {
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index 1a8f5e8b10e3..818886e11713 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -47,8 +47,6 @@
 			reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
 			reg-names = "dbi", "config";
 			interrupts = <0 68 0x4>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0x0 0 &gic 0 68 0x4>;
 			num-lanes = <1>;
 			phys = <&miphy0 1>;
 			phy-names = "pcie-phy";
@@ -90,7 +88,7 @@
 		};
 
 		pwm: pwm@e0180000 {
-			compatible ="st,spear13xx-pwm";
+			compatible = "st,spear13xx-pwm";
 			reg = <0xe0180000 0x1000>;
 			#pwm-cells = <2>;
 			status = "disabled";
@@ -136,9 +134,9 @@
 				reg = <0xb4100000 0x1000>;
 				interrupts = <0 105 0x4>;
 				status = "disabled";
-				dmas = <&dwdma0 12 0 1>,
-					<&dwdma0 13 1 0>;
-				dma-names = "tx", "rx";
+				dmas = <&dwdma0 13 0 1>,
+					<&dwdma0 12 1 0>;
+				dma-names = "rx", "tx";
 			};
 
 			thermal@e07008c4 {
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index c87b881b2c8b..913553367687 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -284,9 +284,9 @@
 				#size-cells = <0>;
 				interrupts = <0 31 0x4>;
 				status = "disabled";
-				dmas = <&dwdma0 4 0 0>,
-					<&dwdma0 5 0 0>;
-				dma-names = "tx", "rx";
+				dmas = <&dwdma0 5 0 0>,
+					<&dwdma0 4 0 0>;
+				dma-names = "rx", "tx";
 			};
 
 			rtc@e0580000 {
diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts
index 2beb30ca2cba..303ef29fb805 100644
--- a/arch/arm/boot/dts/spear300-evb.dts
+++ b/arch/arm/boot/dts/spear300-evb.dts
@@ -80,7 +80,7 @@
 
 		smi: flash@fc000000 {
 			status = "okay";
-			clock-rate=<50000000>;
+			clock-rate = <50000000>;
 
 			flash@f8000000 {
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
index b39bd5a22627..f1135e887f7b 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -46,7 +46,7 @@
 			status = "disabled";
 		};
 
-		shirq: interrupt-controller@0x50000000 {
+		shirq: interrupt-controller@50000000 {
 			compatible = "st,spear300-shirq";
 			reg = <0x50000000 0x1000>;
 			interrupts = <28>;
diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts
index 1c41e4a40334..ea0b53036f7b 100644
--- a/arch/arm/boot/dts/spear310-evb.dts
+++ b/arch/arm/boot/dts/spear310-evb.dts
@@ -94,7 +94,7 @@
 
 		smi: flash@fc000000 {
 			status = "okay";
-			clock-rate=<50000000>;
+			clock-rate = <50000000>;
 
 			flash@f8000000 {
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index 8ce751a1376d..ce08d8820940 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -34,7 +34,7 @@
 			status = "disabled";
 		};
 
-		shirq: interrupt-controller@0xb4000000 {
+		shirq: interrupt-controller@b4000000 {
 			compatible = "st,spear310-shirq";
 			reg = <0xb4000000 0x1000>;
 			interrupts = <28 29 30 1>;
@@ -92,6 +92,7 @@
 			gpiopinctrl: gpio@b4000000 {
 				compatible = "st,spear-plgpio";
 				reg = <0xb4000000 0x1000>;
+				regmap = <&pinmux>;
 				#interrupt-cells = <1>;
 				interrupt-controller;
 				gpio-controller;
diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts
index c322407a0ade..3c026d021c92 100644
--- a/arch/arm/boot/dts/spear320-evb.dts
+++ b/arch/arm/boot/dts/spear320-evb.dts
@@ -95,7 +95,7 @@
 
 		smi: flash@fc000000 {
 			status = "okay";
-			clock-rate=<50000000>;
+			clock-rate = <50000000>;
 
 			flash@f8000000 {
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts
index 367ba48aac3e..721e5ee7b680 100644
--- a/arch/arm/boot/dts/spear320-hmi.dts
+++ b/arch/arm/boot/dts/spear320-hmi.dts
@@ -167,7 +167,7 @@
 
 		smi: flash@fc000000 {
 			status = "okay";
-			clock-rate=<50000000>;
+			clock-rate = <50000000>;
 
 			flash@f8000000 {
 				#address-cells = <1>;
@@ -235,14 +235,13 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <0x41>;
-					irq-over-gpio;
 					irq-gpios = <&gpiopinctrl 29 0x4>;
 					id = <0>;
 					blocks = <0x5>;
 					irq-trigger = <0x1>;
 
 					stmpegpio: stmpe-gpio {
-						compatible = "stmpe,gpio";
+						compatible = "st,stmpe-gpio";
 						reg = <0>;
 						gpio-controller;
 						#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index 3bc1e93a0a55..56f141297ea3 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -49,7 +49,7 @@
 			status = "disabled";
 		};
 
-		shirq: interrupt-controller@0xb3000000 {
+		shirq: interrupt-controller@b3000000 {
 			compatible = "st,spear320-shirq";
 			reg = <0xb3000000 0x1000>;
 			interrupts = <30 28 29 1>;
@@ -78,7 +78,7 @@
 		};
 
 		pwm: pwm@a8000000 {
-			compatible ="st,spear-pwm";
+			compatible = "st,spear-pwm";
 			reg = <0xa8000000 0x1000>;
 			#pwm-cells = <2>;
 			status = "disabled";
@@ -120,6 +120,7 @@
 			gpiopinctrl: gpio@b3000000 {
 				compatible = "st,spear-plgpio";
 				reg = <0xb3000000 0x1000>;
+				regmap = <&pinmux>;
 				#interrupt-cells = <1>;
 				interrupt-controller;
 				gpio-controller;
diff --git a/arch/arm/boot/dts/spear320s.dtsi b/arch/arm/boot/dts/spear320s.dtsi
new file mode 100644
index 000000000000..133236dc190d
--- /dev/null
+++ b/arch/arm/boot/dts/spear320s.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DTS file for SPEAr320s SoC
+ *
+ * Copyright 2021 Herve Codina <herve.codina@bootlin.com>
+ */
+
+/include/ "spear320.dtsi"
+
+/ {
+	ahb {
+		apb {
+			gpiopinctrl: gpio@b3000000 {
+				/*
+				 * The "RM0321 SPEAr320s address and map
+				 * registers" document mentions interrupt 6
+				 * (NPGIO_INTR) for the PL_GPIO interrupt.
+				 */
+				interrupts = <6>;
+				interrupt-parent = <&shirq>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi
index f266b7b03482..cc88ebe7a60c 100644
--- a/arch/arm/boot/dts/spear3xx.dtsi
+++ b/arch/arm/boot/dts/spear3xx.dtsi
@@ -47,7 +47,7 @@
 		};
 
 		gmac: eth@e0800000 {
-			compatible = "st,spear600-gmac";
+			compatible = "snps,dwmac-3.40a";
 			reg = <0xe0800000 0x8000>;
 			interrupts = <23 22>;
 			interrupt-names = "macirq", "eth_wake_irq";
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index fd41243a0b2c..6b67c0ceaed9 100644
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -47,7 +47,7 @@
 			compatible = "arm,pl110", "arm,primecell";
 			reg = <0xfc200000 0x1000>;
 			interrupt-parent = <&vic1>;
-			interrupts = <12>;
+			interrupts = <13>;
 			status = "disabled";
 		};
 
@@ -207,6 +207,36 @@
 				interrupts = <6>;
 				status = "disabled";
 			};
+
+			ssp1: spi@d0100000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xd0100000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-parent = <&vic0>;
+				interrupts = <26>;
+				status = "disabled";
+			};
+
+			ssp2: spi@d0180000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xd0180000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-parent = <&vic0>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			ssp3: spi@d8180000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xd8180000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupt-parent = <&vic1>;
+				interrupts = <5>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index 4fd09997a2b9..dd30d08ccb9b 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -28,29 +28,31 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 
 				ab8500_clock: clock-controller {
 					compatible = "stericsson,ab8500-clk";
 					#clock-cells = <1>;
 				};
 
-				ab8500_gpio: ab8500-gpio {
+				ab8500_gpio: gpio {
 					compatible = "stericsson,ab8500-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
 				};
 
-				ab8500-rtc {
+				rtc {
 					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
-						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
-				gpadc: ab8500-gpadc {
+				gpadc: adc {
 					compatible = "stericsson,ab8500-gpadc";
-					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
-						      39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
+						     <39 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "HW_CONV_END", "SW_CONV_END";
 					vddadc-supply = <&ab8500_ldo_tvout_reg>;
 					#address-cells = <1>;
@@ -58,46 +60,46 @@
 					#io-channel-cells = <1>;
 
 					/* GPADC channels */
-					bat_ctrl: channel@01 {
+					bat_ctrl: channel@1 {
 						reg = <0x01>;
 					};
-					btemp_ball: channel@02 {
+					btemp_ball: channel@2 {
 						reg = <0x02>;
 					};
-					main_charger_v: channel@03 {
+					main_charger_v: channel@3 {
 						reg = <0x03>;
 					};
-					acc_detect1: channel@04 {
+					acc_detect1: channel@4 {
 						reg = <0x04>;
 					};
-					acc_detect2: channel@05 {
+					acc_detect2: channel@5 {
 						reg = <0x05>;
 					};
-					adc_aux1: channel@06 {
+					adc_aux1: channel@6 {
 						reg = <0x06>;
 					};
-					adc_aux2: channel@07 {
+					adc_aux2: channel@7 {
 						reg = <0x07>;
 					};
-					main_batt_v: channel@08 {
+					main_batt_v: channel@8 {
 						reg = <0x08>;
 					};
-					vbus_v: channel@09 {
+					vbus_v: channel@9 {
 						reg = <0x09>;
 					};
-					main_charger_c: channel@0a {
+					main_charger_c: channel@a {
 						reg = <0x0a>;
 					};
-					usb_charger_c: channel@0b {
+					usb_charger_c: channel@b {
 						reg = <0x0b>;
 					};
-					bk_bat_v: channel@0c {
+					bk_bat_v: channel@c {
 						reg = <0x0c>;
 					};
-					die_temp: channel@0d {
+					die_temp: channel@d {
 						reg = <0x0d>;
 					};
-					usb_id: channel@0e {
+					usb_id: channel@e {
 						reg = <0x0e>;
 					};
 					xtal_temp: channel@12 {
@@ -120,18 +122,10 @@
 					};
 				};
 
-				ab8500_temp {
+				thermal {
 					compatible = "stericsson,abx500-temp";
 					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ABX500_TEMP_WARM";
-					io-channels = <&gpadc 0x06>,
-						      <&gpadc 0x07>;
-					io-channel-names = "aux1", "aux2";
-				};
-
-				ab8500_battery: ab8500_battery {
-					stericsson,battery-type = "LIPO";
-					thermistor-on-batctrl;
 				};
 
 				ab8500_fg {
@@ -146,7 +140,7 @@
 							  "LOW_BAT_F",
 							  "CC_INT_CALIB",
 							  "CCEOC";
-					battery = <&ab8500_battery>;
+					monitored-battery = <&battery>;
 					io-channels = <&gpadc 0x08>;
 					io-channel-names = "main_bat_v";
 				};
@@ -163,7 +157,7 @@
 							  "BTEMP_HIGH",
 							  "BTEMP_LOW_MEDIUM",
 							  "BTEMP_MEDIUM_HIGH";
-					battery = <&ab8500_battery>;
+					monitored-battery = <&battery>;
 					io-channels = <&gpadc 0x02>,
 						      <&gpadc 0x01>;
 					io-channel-names = "btemp_ball",
@@ -200,8 +194,8 @@
 							  "VBUS_OVV",
 							  "CH_WD_EXP",
 							  "VBUS_CH_DROP_END";
-					battery		= <&ab8500_battery>;
-					vddadc-supply	= <&ab8500_ldo_tvout_reg>;
+					monitored-battery = <&battery>;
+					vddadc-supply = <&ab8500_ldo_tvout_reg>;
 					io-channels = <&gpadc 0x03>,
 						      <&gpadc 0x0a>,
 						      <&gpadc 0x09>,
@@ -213,19 +207,19 @@
 				};
 
 				ab8500_chargalg {
-					compatible	= "stericsson,ab8500-chargalg";
-					battery		= <&ab8500_battery>;
+					compatible = "stericsson,ab8500-chargalg";
+					monitored-battery = <&battery>;
 				};
 
-				ab8500_usb {
+				ab8500_usb: phy {
 					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
-						       96 IRQ_TYPE_LEVEL_HIGH
-						       14 IRQ_TYPE_LEVEL_HIGH
-						       15 IRQ_TYPE_LEVEL_HIGH
-						       79 IRQ_TYPE_LEVEL_HIGH
-						       74 IRQ_TYPE_LEVEL_HIGH
-						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+						     <96 IRQ_TYPE_LEVEL_HIGH>,
+						     <14 IRQ_TYPE_LEVEL_HIGH>,
+						     <15 IRQ_TYPE_LEVEL_HIGH>,
+						     <79 IRQ_TYPE_LEVEL_HIGH>,
+						     <74 IRQ_TYPE_LEVEL_HIGH>,
+						     <75 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ID_WAKEUP_R",
 							  "ID_WAKEUP_F",
 							  "VBUS_DET_F",
@@ -238,12 +232,13 @@
 					musb_1v8-supply = <&db8500_vsmps2_reg>;
 					clocks = <&prcmu_clk PRCMU_SYSCLK>;
 					clock-names = "sysclk";
+					#phy-cells = <0>;
 				};
 
-				ab8500-ponkey {
+				key {
 					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
-						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+						     <7 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
 				};
 
@@ -251,29 +246,31 @@
 					compatible = "stericsson,ab8500-sysctrl";
 				};
 
-				ab8500-pwm-1 {
+				pwm@1 {
 					compatible = "stericsson,ab8500-pwm";
+					reg = <1>;
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
+					#pwm-cells = <1>;
 				};
 
-				ab8500-pwm-2 {
+				pwm@2 {
 					compatible = "stericsson,ab8500-pwm";
+					reg = <2>;
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
+					#pwm-cells = <1>;
 				};
 
-				ab8500-pwm-3 {
+				pwm@3 {
 					compatible = "stericsson,ab8500-pwm";
+					reg = <3>;
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
+					#pwm-cells = <1>;
 				};
 
-				ab8500-debugfs {
-					compatible = "stericsson,ab8500-debug";
-				};
-
-				codec: ab8500-codec {
+				codec: codec {
 					compatible = "stericsson,ab8500-codec";
 
 					V-AUD-supply = <&ab8500_ldo_audio_reg>;
@@ -287,7 +284,7 @@
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};
 
-				ext_regulators: ab8500-ext-regulators {
+				ext_regulators: regulator-external {
 					compatible = "stericsson,ab8500-ext-regulator";
 
 					ab8500_ext1_reg: ab8500_ext1 {
@@ -311,14 +308,14 @@
 					};
 				};
 
-				ab8500-regulators {
+				regulator {
 					compatible = "stericsson,ab8500-regulator";
 					vin-supply = <&ab8500_ext3_reg>;
 
 					// supplies to the display/camera
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-min-microvolt = <2500000>;
-						regulator-max-microvolt = <2900000>;
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <3300000>;
 						regulator-boot-on;
 						/* BUG: If turned off MMC will be affected. */
 						regulator-always-on;
@@ -386,5 +383,10 @@
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
 		};
+
+		usb_per5@a03e0000 {
+			phys = <&ab8500_usb>;
+			phy-names = "usb";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
index cc045b2fc217..131c82508e82 100644
--- a/arch/arm/boot/dts/ste-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -25,26 +25,28 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 
 				ab8500_clock: clock-controller {
 					compatible = "stericsson,ab8500-clk";
 					#clock-cells = <1>;
 				};
 
-				ab8505_gpio: ab8505-gpio {
+				ab8505_gpio: gpio {
 					compatible = "stericsson,ab8505-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
 				};
 
-				ab8500-rtc {
+				rtc {
 					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
-						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
-				gpadc: ab8500-gpadc {
+				gpadc: adc {
 					compatible = "stericsson,ab8500-gpadc";
 					interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "SW_CONV_END";
@@ -54,51 +56,51 @@
 					#io-channel-cells = <1>;
 
 					/* GPADC channels */
-					bat_ctrl: channel@01 {
+					bat_ctrl: channel@1 {
 						reg = <0x01>;
 					};
-					btemp_ball: channel@02 {
+					btemp_ball: channel@2 {
 						reg = <0x02>;
 					};
-					acc_detect1: channel@04 {
+					acc_detect1: channel@4 {
 						reg = <0x04>;
 					};
-					acc_detect2: channel@05 {
+					acc_detect2: channel@5 {
 						reg = <0x05>;
 					};
-					adc_aux1: channel@06 {
+					adc_aux1: channel@6 {
 						reg = <0x06>;
 					};
-					adc_aux2: channel@07 {
+					adc_aux2: channel@7 {
 						reg = <0x07>;
 					};
-					main_batt_v: channel@08 {
+					main_batt_v: channel@8 {
 						reg = <0x08>;
 					};
-					vbus_v: channel@09 {
+					vbus_v: channel@9 {
 						reg = <0x09>;
 					};
-					charger_c: channel@0b {
+					charger_c: channel@b {
 						reg = <0x0b>;
 					};
-					bk_bat_v: channel@0c {
+					bk_bat_v: channel@c {
 						reg = <0x0c>;
 					};
-					die_temp: channel@0d {
+					die_temp: channel@d {
 						reg = <0x0d>;
 					};
-					usb_id: channel@0e {
+					usb_id: channel@e {
 						reg = <0x0e>;
 					};
 				};
 
-				ab8500_battery: ab8500_battery {
-					stericsson,battery-type = "LIPO";
-					thermistor-on-batctrl;
+				thermal {
+					compatible = "stericsson,abx500-temp";
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ABX500_TEMP_WARM";
 				};
 
 				ab8500_fg {
-					status = "disabled";
 					compatible = "stericsson,ab8500-fg";
 					interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
 						     <8 IRQ_TYPE_LEVEL_HIGH>,
@@ -110,13 +112,12 @@
 							  "LOW_BAT_F",
 							  "CC_INT_CALIB",
 							  "CCEOC";
-					battery = <&ab8500_battery>;
+					monitored-battery = <&battery>;
 					io-channels = <&gpadc 0x08>;
 					io-channel-names = "main_bat_v";
 				};
 
 				ab8500_btemp {
-					status = "disabled";
 					compatible = "stericsson,ab8500-btemp";
 					interrupts = <20 IRQ_TYPE_LEVEL_HIGH>,
 						     <80 IRQ_TYPE_LEVEL_HIGH>,
@@ -128,7 +129,7 @@
 							  "BTEMP_HIGH",
 							  "BTEMP_LOW_MEDIUM",
 							  "BTEMP_MEDIUM_HIGH";
-					battery = <&ab8500_battery>;
+					monitored-battery = <&battery>;
 					io-channels = <&gpadc 0x02>,
 						      <&gpadc 0x01>;
 					io-channel-names = "btemp_ball",
@@ -136,7 +137,6 @@
 				};
 
 				ab8500_charger {
-					status = "disabled";
 					compatible = "stericsson,ab8500-charger";
 					interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
 						     <11 IRQ_TYPE_LEVEL_HIGH>,
@@ -166,7 +166,7 @@
 							  "VBUS_OVV",
 							  "CH_WD_EXP",
 							  "VBUS_CH_DROP_END";
-					battery = <&ab8500_battery>;
+					monitored-battery = <&battery>;
 					vddadc-supply = <&ab8500_ldo_adc_reg>;
 					io-channels = <&gpadc 0x09>,
 						      <&gpadc 0x0b>;
@@ -175,20 +175,19 @@
 				};
 
 				ab8500_chargalg {
-					status = "disabled";
 					compatible = "stericsson,ab8500-chargalg";
-					battery = <&ab8500_battery>;
+					monitored-battery = <&battery>;
 				};
 
-				ab8500_usb: ab8500_usb {
+				ab8500_usb: phy {
 					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
-						       96 IRQ_TYPE_LEVEL_HIGH
-						       14 IRQ_TYPE_LEVEL_HIGH
-						       15 IRQ_TYPE_LEVEL_HIGH
-						       79 IRQ_TYPE_LEVEL_HIGH
-						       74 IRQ_TYPE_LEVEL_HIGH
-						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+						     <96 IRQ_TYPE_LEVEL_HIGH>,
+						     <14 IRQ_TYPE_LEVEL_HIGH>,
+						     <15 IRQ_TYPE_LEVEL_HIGH>,
+						     <79 IRQ_TYPE_LEVEL_HIGH>,
+						     <74 IRQ_TYPE_LEVEL_HIGH>,
+						     <75 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ID_WAKEUP_R",
 							  "ID_WAKEUP_F",
 							  "VBUS_DET_F",
@@ -201,12 +200,13 @@
 					musb_1v8-supply = <&db8500_vsmps2_reg>;
 					clocks = <&prcmu_clk PRCMU_SYSCLK>;
 					clock-names = "sysclk";
+					#phy-cells = <0>;
 				};
 
-				ab8500-ponkey {
+				key {
 					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
-						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+						     <7 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
 				};
 
@@ -214,17 +214,15 @@
 					compatible = "stericsson,ab8500-sysctrl";
 				};
 
-				ab8500-pwm {
+				pwm@1 {
 					compatible = "stericsson,ab8500-pwm";
+					reg = <1>;
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
+					#pwm-cells = <1>;
 				};
 
-				ab8500-debugfs {
-					compatible = "stericsson,ab8500-debug";
-				};
-
-				codec: ab8500-codec {
+				codec: codec {
 					compatible = "stericsson,ab8500-codec";
 
 					V-AUD-supply = <&ab8500_ldo_audio_reg>;
@@ -237,7 +235,7 @@
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};
 
-				ab8505-regulators {
+				regulator {
 					compatible = "stericsson,ab8505-regulator";
 
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
@@ -322,5 +320,10 @@
 				vana-supply = <&ab8500_ldo_ana_reg>;
 			};
 		};
+
+		usb_per5@a03e0000 {
+			phys = <&ab8500_usb>;
+			phy-names = "usb";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-db8500.dtsi b/arch/arm/boot/dts/ste-db8500.dtsi
index 344d29853bf7..f1ff3f4835d7 100644
--- a/arch/arm/boot/dts/ste-db8500.dtsi
+++ b/arch/arm/boot/dts/ste-db8500.dtsi
@@ -5,11 +5,10 @@
 / {
 	cpus {
 		cpu@300 {
-			/* cpufreq controls */
 			operating-points = <998400 0
-					    800000 0
-					    400000 0
-					    200000 0>;
+					    798720 0
+					    399360 0
+					    199680 0>;
 		};
 	};
 
@@ -19,19 +18,19 @@
 		ranges;
 
 		/* Modem trace memory */
-		ram@06000000 {
+		ram@6000000 {
 			reg = <0x06000000 0x00f00000>;
 			no-map;
 		};
 
 		/* Modem shared memory */
-		ram@06f00000 {
+		ram@6f00000 {
 			reg = <0x06f00000 0x00100000>;
 			no-map;
 		};
 
 		/* Modem private memory */
-		ram@07000000 {
+		ram@7000000 {
 			reg = <0x07000000 0x01000000>;
 			no-map;
 		};
diff --git a/arch/arm/boot/dts/ste-db8520.dtsi b/arch/arm/boot/dts/ste-db8520.dtsi
index 287804e9e183..e4e8d5fc1f8a 100644
--- a/arch/arm/boot/dts/ste-db8520.dtsi
+++ b/arch/arm/boot/dts/ste-db8520.dtsi
@@ -5,11 +5,10 @@
 / {
 	cpus {
 		cpu@300 {
-			/* cpufreq controls */
 			operating-points = <1152000 0
-					    800000 0
-					    400000 0
-					    200000 0>;
+					    798720 0
+					    399360 0
+					    199680 0>;
 		};
 	};
 
@@ -19,19 +18,19 @@
 		ranges;
 
 		/* Modem trace memory */
-		ram@06000000 {
+		ram@6000000 {
 			reg = <0x06000000 0x00f00000>;
 			no-map;
 		};
 
 		/* Modem shared memory */
-		ram@06f00000 {
+		ram@6f00000 {
 			reg = <0x06f00000 0x00100000>;
 			no-map;
 		};
 
 		/* Modem private memory */
-		ram@07000000 {
+		ram@7000000 {
 			reg = <0x07000000 0x01000000>;
 			no-map;
 		};
diff --git a/arch/arm/boot/dts/ste-db9500.dtsi b/arch/arm/boot/dts/ste-db9500.dtsi
index 0afff703191c..4273d36e881d 100644
--- a/arch/arm/boot/dts/ste-db9500.dtsi
+++ b/arch/arm/boot/dts/ste-db9500.dtsi
@@ -5,11 +5,10 @@
 / {
 	cpus {
 		cpu@300 {
-			/* cpufreq controls */
-			operating-points = <1152000 0
-					    800000 0
-					    400000 0
-					    200000 0>;
+			operating-points = <998400 0
+					    798720 0
+					    399360 0
+					    199680 0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
index 7bf7a2d34cbc..31a86606beda 100644
--- a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi
@@ -163,6 +163,24 @@
 	};
 
 	i2c2 {
+		i2c2_b_1_default: i2c2_b_1_default {
+			default_mux {
+				function = "i2c2";
+				groups = "i2c2_b_1";
+			};
+			default_cfg1 {
+				pins = "GPIO8_AD5", "GPIO9_AE4"; /* SDA/SCL */
+				ste,config = <&in_nopull>;
+			};
+		};
+
+		i2c2_b_1_sleep: i2c2_b_1_sleep {
+			sleep_cfg1 {
+				pins = "GPIO8_AD5", "GPIO9_AE4"; /* SDA/SCL */
+				ste,config = <&slpm_in_wkup_pdis>;
+			};
+		};
+
 		i2c2_b_2_default: i2c2_b_2_default {
 			default_mux {
 				function = "i2c2";
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 68607e4ad80c..fead7afd5517 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -5,6 +5,8 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/ste-db8500-clkout.h>
+#include <dt-bindings/reset/stericsson,db8500-prcc-reset.h>
 #include <dt-bindings/mfd/dbx500-prcmu.h>
 #include <dt-bindings/arm/ux500_pm_domains.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -300,6 +302,10 @@
 				#clock-cells = <2>;
 			};
 
+			prcc_reset: prcc-reset-controller {
+				#reset-cells = <2>;
+			};
+
 			rtc_clk: rtc32k-clock {
 				#clock-cells = <0>;
 			};
@@ -307,6 +313,11 @@
 			smp_twd_clk: smp-twd-clock {
 				#clock-cells = <0>;
 			};
+
+			clkout_clk: clkout-clock {
+				/* Cell 1 id, cell 2 source, cell 3 div */
+				#clock-cells = <3>;
+			};
 		};
 
 		mtu@a03c6000 {
@@ -656,12 +667,12 @@
 
 			#address-cells = <1>;
 			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
 			clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_I2C0>;
 
 			status = "disabled";
 		};
@@ -673,13 +684,13 @@
 
 			#address-cells = <1>;
 			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
 
 			clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_I2C1>;
 
 			status = "disabled";
 		};
@@ -691,13 +702,13 @@
 
 			#address-cells = <1>;
 			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
 
 			clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_I2C2>;
 
 			status = "disabled";
 		};
@@ -709,13 +720,13 @@
 
 			#address-cells = <1>;
 			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
 
 			clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_I2C3>;
 
 			status = "disabled";
 		};
@@ -727,13 +738,13 @@
 
 			#address-cells = <1>;
 			#size-cells = <0>;
-			v-i2c-supply = <&db8500_vape_reg>;
 
 			clock-frequency = <400000>;
 
 			clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
 			clock-names = "i2cclk", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_I2C4>;
 
 			status = "disabled";
 		};
@@ -745,11 +756,12 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 			dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
 			       <&dma 8 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SSP0>;
 
 			status = "disabled";
 		};
@@ -761,11 +773,12 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 			dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
 			       <&dma 9 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SSP1>;
 
 			status = "disabled";
 		};
@@ -778,7 +791,7 @@
 			#size-cells = <0>;
 			/* Same clock wired to kernel and pclk */
 			clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 			dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
 			       <&dma 0 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
@@ -795,7 +808,7 @@
 			#size-cells = <0>;
 			/* Same clock wired to kernel and pclk */
 			clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 			dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
 			       <&dma 35 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
@@ -812,7 +825,7 @@
 			#size-cells = <0>;
 			/* Same clock wired to kernel and pclk */
 			clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 			dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
 			       <&dma 33 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
@@ -829,11 +842,12 @@
 			#size-cells = <0>;
 			/* Same clock wired to kernel and pclk */
 			clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 			dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
 			       <&dma 40 0 0x0>; /* Logical - MemToDev */
 			dma-names = "rx", "tx";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_SPI3>;
 
 			status = "disabled";
 		};
@@ -849,6 +863,7 @@
 
 			clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>;
 			clock-names = "uart", "apb_pclk";
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_UART0>;
 
 			status = "disabled";
 		};
@@ -864,6 +879,7 @@
 
 			clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>;
 			clock-names = "uart", "apb_pclk";
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_UART1>;
 
 			status = "disabled";
 		};
@@ -879,6 +895,7 @@
 
 			clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>;
 			clock-names = "uart", "apb_pclk";
+			resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_UART2>;
 
 			status = "disabled";
 		};
@@ -895,6 +912,7 @@
 			clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
 			clock-names = "sdi", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_SDI0>;
 
 			status = "disabled";
 		};
@@ -911,6 +929,7 @@
 			clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
 			clock-names = "sdi", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_SDI1>;
 
 			status = "disabled";
 		};
@@ -927,6 +946,7 @@
 			clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
 			clock-names = "sdi", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SDI2>;
 
 			status = "disabled";
 		};
@@ -943,6 +963,7 @@
 			clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
 			clock-names = "sdi", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_SDI3>;
 
 			status = "disabled";
 		};
@@ -959,6 +980,7 @@
 			clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
 			clock-names = "sdi", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_SDI4>;
 
 			status = "disabled";
 		};
@@ -975,6 +997,7 @@
 			clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
 			clock-names = "sdi", "apb_pclk";
 			power-domains = <&pm_domains DOMAIN_VAPE>;
+			resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_SDI5>;
 
 			status = "disabled";
 		};
@@ -996,6 +1019,7 @@
 
 			clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>;
 			clock-names = "msp", "apb_pclk";
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_MSP0>;
 
 			status = "disabled";
 		};
@@ -1012,6 +1036,7 @@
 
 			clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>;
 			clock-names = "msp", "apb_pclk";
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_MSP1>;
 
 			status = "disabled";
 		};
@@ -1030,6 +1055,7 @@
 
 			clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>;
 			clock-names = "msp", "apb_pclk";
+			resets = <&prcc_reset DB8500_PRCC_2 DB8500_PRCC_2_RESET_MSP2>;
 
 			status = "disabled";
 		};
@@ -1046,6 +1072,7 @@
 
 			clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>;
 			clock-names = "msp", "apb_pclk";
+			resets = <&prcc_reset DB8500_PRCC_1 DB8500_PRCC_1_RESET_MSP3>;
 
 			status = "disabled";
 		};
@@ -1128,17 +1155,15 @@
 			compatible = "stericsson,ux500-cryp";
 			reg = <0xa03cb000 0x1000>;
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-
-			v-ape-supply = <&db8500_vape_reg>;
 			clocks = <&prcc_pclk 6 1>;
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 
 		hash@a03c2000 {
 			compatible = "stericsson,ux500-hash";
 			reg = <0xa03c2000 0x1000>;
-
-			v-ape-supply = <&db8500_vape_reg>;
 			clocks = <&prcc_pclk 6 2>;
+			power-domains = <&pm_domains DOMAIN_VAPE>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi
index 4946743de7b9..9fa024900d53 100644
--- a/arch/arm/boot/dts/ste-href-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi
@@ -9,7 +9,7 @@
 	soc {
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpio {
+				gpio {
 					/* Hog a few default settings */
 					pinctrl-names = "default";
 					pinctrl-0 = <&gpio2_default_mode>,
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
index e024520f4d47..37e59403c01f 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
@@ -1,14 +1,89 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Device Tree for the TVK1281618 R2 UIB
+ * Device Tree for the TVK1281618 R2 user interface board (UIB)
  */
 
-#include "ste-href-tvk1281618.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
 
 / {
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&ab8500_ldo_aux1_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>;
+
+		button@139 {
+			/* Proximity sensor */
+			gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>;
+			linux,code = <11>; /* SW_FRONT_PROXIMITY */
+			label = "SFH7741 Proximity Sensor";
+		};
+		button@145 {
+			/* Hall sensor */
+			gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+			linux,code = <0>; /* SW_LID */
+			label = "HED54XXU11 Hall Effect Sensor";
+		};
+	};
+
 	soc {
+		i2c@80004000 {
+			tc35893@44 {
+				compatible = "toshiba,tc35893";
+				reg = <0x44>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tc35893_tvk_mode>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				status = "disabled";
+
+				tc3589x_gpio {
+					compatible = "toshiba,tc3589x-gpio";
+					interrupts = <0>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+				tc3589x_keypad {
+					compatible = "toshiba,tc3589x-keypad";
+					interrupts = <6>;
+					debounce-delay-ms = <4>;
+					keypad,num-columns = <8>;
+					keypad,num-rows = <8>;
+					linux,no-autorepeat;
+					wakeup-source;
+					linux,keymap = <MATRIX_KEY(3, 1, KEY_END)>,
+						       <MATRIX_KEY(4, 1, KEY_HOME)>,
+						       <MATRIX_KEY(6, 4, KEY_VOLUMEDOWN)>,
+						       <MATRIX_KEY(4, 2, KEY_EMAIL)>,
+						       <MATRIX_KEY(3, 3, KEY_RIGHT)>,
+						       <MATRIX_KEY(2, 5, KEY_BACKSPACE)>,
+						       <MATRIX_KEY(6, 7, KEY_MENU)>,
+						       <MATRIX_KEY(5, 0, KEY_ENTER)>,
+						       <MATRIX_KEY(4, 3, KEY_0)>,
+						       <MATRIX_KEY(3, 4, KEY_DOT)>,
+						       <MATRIX_KEY(5, 2, KEY_UP)>,
+						       <MATRIX_KEY(3, 5, KEY_DOWN)>,
+						       <MATRIX_KEY(4, 5, KEY_SEND)>,
+						       <MATRIX_KEY(0, 5, KEY_BACK)>,
+						       <MATRIX_KEY(6, 2, KEY_VOLUMEUP)>,
+						       <MATRIX_KEY(1, 3, KEY_SPACE)>,
+						       <MATRIX_KEY(7, 6, KEY_LEFT)>,
+						       <MATRIX_KEY(5, 5, KEY_SEARCH)>;
+				};
+			};
+		};
+
 		i2c@80128000 {
-			lsm303dlh@18 {
+			accelerometer@18 {
 				/* Accelerometer */
 				compatible = "st,lsm303dlh-accel";
 				st,drdy-int-pin = <1>;
@@ -29,8 +104,11 @@
 				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
 				 * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
 				 */
+				mount-matrix = "0", "1", "0",
+					       "1", "0", "0",
+					       "0", "0", "-1";
 			};
-			lsm303dlh@1e {
+			magnetometer@1e {
 				/* Magnetometer */
 				compatible = "st,lsm303dlh-magn";
 				reg = <0x1e>;
@@ -48,7 +126,7 @@
 				 * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>;
 				 */
 			};
-			lis331dl@1c {
+			accelerometer@1c {
 				/* Accelerometer */
 				compatible = "st,lis331dl-accel";
 				st,drdy-int-pin = <1>;
@@ -61,6 +139,75 @@
 				/* INT2 would need to be open drain */
 				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
 					     <19 IRQ_TYPE_EDGE_RISING>;
+				mount-matrix = "0", "-1", "0",
+					       "-1", "0", "0",
+					       "0", "0", "-1";
+			};
+			magnetometer@f {
+				/* Magnetometer */
+				compatible = "asahi-kasei,ak8974";
+				reg = <0x0f>;
+				avdd-supply = <&ab8500_ldo_aux1_reg>;
+				dvdd-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gyro_magn_tvk_mode>;
+				/*
+				 * These interrupts cannot be used: the other component
+				 * ST-Micro L3D4200D gyro that is connected to the same lines
+				 * cannot set its DRDY line to open drain, so it cannot be
+				 * shared with other peripherals. The should be defined for
+				 * the falling edge if they could be wired together.
+				 *
+				 * interrupts-extended =
+				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
+				 * <&gpio0 31 IRQ_TYPE_EDGE_FALLING>;
+				 */
+			};
+			gyroscope@68 {
+				/* Gyroscope */
+				compatible = "st,l3g4200d-gyro";
+				st,drdy-int-pin = <2>;
+				reg = <0x68>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gyro_magn_tvk_mode>;
+				interrupts-extended =
+				<&gpio1 0 IRQ_TYPE_EDGE_RISING>,
+				<&gpio0 31 IRQ_TYPE_EDGE_RISING>;
+			};
+			pressure@5c {
+				/* Barometer/pressure sensor */
+				compatible = "st,lps001wp-press";
+				reg = <0x5c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+		};
+		i2c@80110000 {
+			synaptics@4b {
+				/* Synaptics RMI4 TM1217 touchscreen */
+				compatible = "syna,rmi4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x4b>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&synaptics_tvk_mode>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+
+				rmi4-f01@1 {
+					reg = <0x1>;
+					syna,nosleep = <1>;
+				};
+				rmi4-f11@11 {
+					reg = <0x11>;
+					syna,sensor-type = <1>;
+					/* This is a landscape display */
+					touchscreen-swapped-x-y;
+				};
 			};
 		};
 		mcde@a0350000 {
@@ -75,5 +222,68 @@
 				};
 			};
 		};
+		pinctrl {
+			prox {
+				prox_tvk_mode: prox_tvk {
+					tvk_cfg {
+						pins = "GPIO217_AH12";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			hall {
+				hall_tvk_mode: hall_tvk {
+					tvk_cfg {
+						pins = "GPIO145_C13";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			tc35893 {
+				/* IRQ from the TC35893 */
+				tc35893_tvk_mode: tc35893_tvk {
+					tvk_cfg {
+						pins = "GPIO218_AH11";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			accelerometer {
+				accel_tvk_mode: accel_tvk {
+					/* Accelerometer interrupt lines 1 & 2 */
+					tvk_cfg {
+						pins = "GPIO82_C1", "GPIO83_D3";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+			gyroscope {
+				/*
+				 * These lines are shared between Gyroscope l3g400dh
+				 * and AK8974 magnetometer.
+				 */
+				gyro_magn_tvk_mode: gyro_magn_tvk {
+					 /* GPIO 31 used for INT pull down the line */
+					tvk_cfg1 {
+						pins = "GPIO31_V3";
+						ste,config = <&gpio_in_pd>;
+					};
+					/* GPIO 32 used for DRDY, pull this down */
+					tvk_cfg2 {
+						pins = "GPIO32_V2";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+			synaptics {
+				synaptics_tvk_mode: synaptics_tvk {
+					/* Touchscreen uses GPIO 84 */
+					tvk_cfg1 {
+						pins = "GPIO84_C2";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
index cb3677f0a1cb..00ce9d79f540 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
@@ -1,44 +1,154 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Device Tree for the TVK1281618 R2 UIB
+ * Device Tree for the TVK1281618 R3 user interface board (UIB)
+ * also known as the "CYTTSP board"
  */
 
-#include "ste-href-tvk1281618.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
 
 / {
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&ab8500_ldo_aux1_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_tvk_mode>;
+
+		button@145 {
+			/* Hall sensor */
+			gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+			linux,code = <0>; /* SW_LID */
+			label = "HED54XXU11 Hall Effect Sensor";
+		};
+	};
+
 	soc {
-		i2c@80128000 {
-			/* Marked:
-			 * 129
-			 * M35
-			 * L3GD20
-			 */
-			l3gd20@6a {
-				/* Gyroscope */
-				compatible = "st,l3gd20";
+		i2c@80004000 {
+			tc35893@44 {
+				compatible = "toshiba,tc35893";
+				reg = <0x44>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tc35893_tvk_mode>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
 				status = "disabled";
+
+				tc3589x_gpio {
+					compatible = "toshiba,tc3589x-gpio";
+					interrupts = <0>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+				tc3589x_keypad {
+					compatible = "toshiba,tc3589x-keypad";
+					interrupts = <6>;
+					debounce-delay-ms = <4>;
+					keypad,num-columns = <8>;
+					keypad,num-rows = <8>;
+					linux,no-autorepeat;
+					wakeup-source;
+					linux,keymap = <MATRIX_KEY(3, 1, KEY_END)>,
+						       <MATRIX_KEY(4, 1, KEY_HOME)>,
+						       <MATRIX_KEY(6, 4, KEY_VOLUMEDOWN)>,
+						       <MATRIX_KEY(4, 2, KEY_EMAIL)>,
+						       <MATRIX_KEY(3, 3, KEY_RIGHT)>,
+						       <MATRIX_KEY(2, 5, KEY_BACKSPACE)>,
+						       <MATRIX_KEY(6, 7, KEY_MENU)>,
+						       <MATRIX_KEY(5, 0, KEY_ENTER)>,
+						       <MATRIX_KEY(4, 3, KEY_0)>,
+						       <MATRIX_KEY(3, 4, KEY_DOT)>,
+						       <MATRIX_KEY(5, 2, KEY_UP)>,
+						       <MATRIX_KEY(3, 5, KEY_DOWN)>,
+						       <MATRIX_KEY(4, 5, KEY_SEND)>,
+						       <MATRIX_KEY(0, 5, KEY_BACK)>,
+						       <MATRIX_KEY(6, 2, KEY_VOLUMEUP)>,
+						       <MATRIX_KEY(1, 3, KEY_SPACE)>,
+						       <MATRIX_KEY(7, 6, KEY_LEFT)>,
+						       <MATRIX_KEY(5, 5, KEY_SEARCH)>;
+				};
+			};
+		};
+
+		i2c@80128000 {
+			accelerometer@19 {
+				compatible = "st,lsm303dlhc-accel";
 				st,drdy-int-pin = <1>;
-				drive-open-drain;
-				reg = <0x6a>; // 0x6a or 0x6b
+				reg = <0x19>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_tvk_mode>;
+				mount-matrix = "0", "-1", "0",
+					       "-1", "0", "0",
+					       "0", "0", "-1";
 			};
-			/*
-			 * Marked:
-			 * 2122
-			 * C3H
-			 * DQEEE
-			 * LIS3DH?
-			 */
-			lis3dh@18 {
-				/* Accelerometer */
-				compatible = "st,lis3dh-accel";
-				st,drdy-int-pin = <1>;
-				reg = <0x18>;
+			magnetometer@1e {
+				compatible = "st,lsm303dlm-magn";
+				reg = <0x1e>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
+				// This interrupt is not properly working with the driver
+				// interrupt-parent = <&gpio1>;
+				// interrupts = <0 IRQ_TYPE_EDGE_RISING>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&accel_tvk_mode>;
+				pinctrl-0 = <&magn_tvk_mode>;
+			};
+			gyroscope@68 {
+				/* Gyroscope */
+				compatible = "st,l3g4200d-gyro";
+				reg = <0x68>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+			pressure@5c {
+				/* Barometer/pressure sensor */
+				compatible = "st,lps001wp-press";
+				reg = <0x5c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+		};
+
+		spi@80111000 {
+			num-cs = <1>;
+			cs-gpios = <&gpio6 24 GPIO_ACTIVE_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_default_mode>;
+			status = "okay";
+
+			touchscreen@0 {
+				compatible = "cypress,cy8ctma340";
+				/*
+				 * Actually the max frequency is 6 MHz, but over 2 MHz the
+				 * data rate needs to be restricted to max 2Mbps which the
+				 * SPI framework cannot handle.
+				 */
+				spi-max-frequency = <2000000>;
+				reg = <0>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+				vcpin-supply = <&ab8500_ldo_aux1_reg>;
+				vdd-supply = <&db8500_vsmps2_reg>;
+				reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+				touchscreen-size-x = <480>;
+				touchscreen-size-y = <854>;
+				active-interval-ms = <0>;
+				touch-timeout-ms = <255>;
+				lowpower-interval-ms = <10>;
+				bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&cyttsp_tvk_mode>;
 			};
 		};
 
@@ -54,5 +164,57 @@
 				};
 			};
 		};
+
+		pinctrl {
+			hall {
+				hall_tvk_mode: hall_tvk {
+					tvk_cfg {
+						pins = "GPIO145_C13";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			tc35893 {
+				/* IRQ from the TC35893 */
+				tc35893_tvk_mode: tc35893_tvk {
+					tvk_cfg {
+						pins = "GPIO64_F3";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			accelerometer {
+				accel_tvk_mode: accel_tvk {
+					/* Accelerometer interrupt lines 1 & 2 */
+					tvk_cfg {
+						pins = "GPIO82_C1", "GPIO83_D3";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+			magnetometer {
+				magn_tvk_mode: magn_tvk {
+					/* GPIO 32 used for DRDY, pull this down */
+					tvk_cfg {
+						pins = "GPIO32_V2";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+			cyttsp {
+				cyttsp_tvk_mode: cyttsp_tvk {
+					/* Touchscreen uses GPIO84 for IRQ */
+					tvk_cfg1 {
+						pins = "GPIO84_C2";
+						ste,config = <&gpio_in_pu>;
+					};
+					/* GPIO143 is reset */
+					tvk_cfg2 {
+						pins = "GPIO143_D12";
+						ste,config = <&gpio_out_hi>;
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
deleted file mode 100644
index e1dbfae22595..000000000000
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ /dev/null
@@ -1,218 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * Device Tree for the TVK1281618 family of UIBs
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		vdd-supply = <&ab8500_ldo_aux1_reg>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>;
-
-		button@139 {
-			/* Proximity sensor */
-			gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>;
-			linux,code = <11>; /* SW_FRONT_PROXIMITY */
-			label = "SFH7741 Proximity Sensor";
-		};
-		button@145 {
-			/* Hall sensor */
-			gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
-			linux,code = <0>; /* SW_LID */
-			label = "HED54XXU11 Hall Effect Sensor";
-		};
-	};
-
-	soc {
-		i2c@80004000 {
-			tc35893@44 {
-				compatible = "toshiba,tc35893";
-				reg = <0x44>;
-				interrupt-parent = <&gpio6>;
-				interrupts = <26 IRQ_TYPE_EDGE_RISING>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&tc35893_tvk_mode>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-
-				tc3589x_gpio {
-					compatible = "toshiba,tc3589x-gpio";
-					interrupts = <0>;
-
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-				tc3589x_keypad {
-					compatible = "toshiba,tc3589x-keypad";
-					interrupts = <6>;
-					debounce-delay-ms = <4>;
-					keypad,num-columns = <8>;
-					keypad,num-rows = <8>;
-					linux,no-autorepeat;
-					wakeup-source;
-					linux,keymap = <0x0301006b
-						        0x04010066
-							0x06040072
-							0x040200d7
-							0x0303006a
-							0x0205000e
-							0x0607008b
-							0x0500001c
-							0x0403000b
-							0x03040034
-							0x05020067
-							0x0305006c
-							0x040500e7
-							0x0005009e
-							0x06020073
-							0x01030039
-							0x07060069
-							0x050500d9>;
-				};
-			};
-		};
-		/* Sensors mounted on all board variants */
-		i2c@80128000 {
-			ak8974@f {
-				/* Magnetometer */
-				compatible = "asahi-kasei,ak8974";
-				reg = <0x0f>;
-				avdd-supply = <&ab8500_ldo_aux1_reg>;
-				dvdd-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gyro_magn_tvk_mode>;
-				/*
-				 * These interrupts cannot be used: the other component
-				 * ST-Micro L3D4200D gyro that is connected to the same lines
-				 * cannot set its DRDY line to open drain, so it cannot be
-				 * shared with other peripherals. The should be defined for
-				 * the falling edge if they could be wired together.
-				 *
-				 * interrupts-extended =
-				 * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>,
-				 * <&gpio0 31 IRQ_TYPE_EDGE_FALLING>;
-				 */
-			};
-			l3g4200d@68 {
-				/* Gyroscope */
-				compatible = "st,l3g4200d-gyro";
-				st,drdy-int-pin = <2>;
-				reg = <0x68>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gyro_magn_tvk_mode>;
-				interrupts-extended =
-				<&gpio1 0 IRQ_TYPE_EDGE_RISING>,
-				<&gpio0 31 IRQ_TYPE_EDGE_RISING>;
-			};
-			lsp001wm@5c {
-				/* Barometer/pressure sensor */
-				compatible = "st,lps001wp-press";
-				reg = <0x5c>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-			};
-		};
-
-		i2c@80110000 {
-			synaptics@4b {
-				/* Synaptics RMI4 TM1217 touchscreen */
-				compatible = "syna,rmi4-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x4b>;
-				vdd-supply = <&ab8500_ldo_aux1_reg>;
-				vddio-supply = <&db8500_vsmps2_reg>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&synaptics_tvk_mode>;
-				interrupt-parent = <&gpio2>;
-				interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
-
-				rmi-f01@1 {
-					reg = <0x1>;
-					syna,nosleep = <1>;
-				};
-				rmi-f11@11 {
-					reg = <0x11>;
-					touchscreen-inverted-x;
-					syna,sensor-type = <1>;
-				};
-			};
-		};
-
-		pinctrl {
-			/* Pull up this GPIO pin */
-			tc35893 {
-				tc35893_tvk_mode: tc35893_tvk {
-					tvk_cfg {
-						pins = "GPIO218_AH11";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			prox {
-				prox_tvk_mode: prox_tvk {
-					tvk_cfg {
-						pins = "GPIO217_AH12";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			hall {
-				hall_tvk_mode: hall_tvk {
-					tvk_cfg {
-						pins = "GPIO145_C13";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-			accelerometer {
-				accel_tvk_mode: accel_tvk {
-					/* Accelerometer interrupt lines 1 & 2 */
-					tvk_cfg {
-						pins = "GPIO82_C1", "GPIO83_D3";
-						ste,config = <&gpio_in_pd>;
-					};
-				};
-			};
-			gyroscope {
-				/*
-				 * These lines are shared between Gyroscope l3g400dh
-				 * and AK8974 magnetometer.
-				 */
-				gyro_magn_tvk_mode: gyro_magn_tvk {
-					 /* GPIO 31 used for INT pull down the line */
-					tvk_cfg1 {
-						pins = "GPIO31_V3";
-						ste,config = <&gpio_in_pd>;
-					};
-					/* GPIO 32 used for DRDY, pull this down */
-					tvk_cfg2 {
-						pins = "GPIO32_V2";
-						ste,config = <&gpio_in_pd>;
-					};
-				};
-			};
-			synaptics {
-				synaptics_tvk_mode: synaptics_tvk {
-					/* Touchscreen uses GPIO 84 */
-					tvk_cfg1 {
-						pins = "GPIO84_C2";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 83b179692dff..e716121a78ce 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 #include "ste-href-family-pinctrl.dtsi"
 
 / {
@@ -12,6 +13,37 @@
 		reg = <0x00000000 0x20000000>;
 	};
 
+	battery: battery {
+		compatible = "simple-battery";
+		battery-type = "lithium-ion-polymer";
+	};
+
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "murata,ncp18wb473";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	soc {
 		uart@80120000 {
 			pinctrl-names = "default", "sleep";
@@ -60,21 +92,24 @@
 				clock-mode = /bits/ 8 <2>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				chan@0 {
+				led@0 {
 					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 					linux,default-trigger = "heartbeat";
 				};
-				chan@1 {
+				led@1 {
 					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
-				chan@2 {
+				led@2 {
 					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 			};
 			lp5521@34 {
@@ -84,20 +119,23 @@
 				clock-mode = /bits/ 8 <2>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				chan@0 {
+				led@0 {
 					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
-				chan@1 {
+				led@1 {
 					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
-				chan@2 {
+				led@2 {
 					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 			};
 			bh1780@29 {
@@ -156,6 +194,8 @@
 			bus-width = <8>;
 			cap-mmc-highspeed;
 			non-removable;
+			no-sdio;
+			no-sd;
 			vmmc-supply = <&db8500_vsmps2_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc2_a_1_default>;
@@ -171,6 +211,8 @@
 			bus-width = <8>;
 			cap-mmc-highspeed;
 			non-removable;
+			no-sdio;
+			no-sd;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc4_a_1_default>;
@@ -202,16 +244,16 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpio {
+				gpio {
 				};
 
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8500-regulators {
+				regulator {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
 					};
diff --git a/arch/arm/boot/dts/ste-href520-tvk.dts b/arch/arm/boot/dts/ste-href520-tvk.dts
index a036a03f6718..4201547c5988 100644
--- a/arch/arm/boot/dts/ste-href520-tvk.dts
+++ b/arch/arm/boot/dts/ste-href520-tvk.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Device Tree for the HREF520 version with the TVK1281618 UIB
+ * Device Tree for the HREF520 version with the TVK1281618 R3 UIB
  */
 
 /dts-v1/;
@@ -9,7 +9,7 @@
 #include "ste-href-tvk1281618-r3.dtsi"
 
 / {
-	model = "ST-Ericsson HREF520 and TVK1281618 UIB";
+	model = "ST-Ericsson HREF520 and TVK1281618 R3 UIB";
 	compatible = "st-ericsson,href520", "st-ericsson,u8500";
 
 
diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
index 4e6e4439dcff..75506339a93c 100644
--- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts
@@ -9,7 +9,7 @@
 #include "ste-href-tvk1281618-r2.dtsi"
 
 / {
-	model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
+	model = "ST-Ericsson HREF (pre-v60) and TVK1281618 R2 UIB";
 	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
 
 	/* ST6G3244ME level translator for 1.8/2.9 V */
diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
index 9c2d2ee6d6d8..2db2f8be8b03 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts
@@ -2,7 +2,7 @@
 /*
  * Copyright 2012 ST-Ericsson AB
  *
- * Device Tree for the HREF version 60 or later with the TVK1281618 UIB
+ * Device Tree for the HREF version 60 or later with the TVK1281618 R2 UIB
  */
 
 /dts-v1/;
@@ -11,7 +11,7 @@
 #include "ste-href-tvk1281618-r2.dtsi"
 
 / {
-	model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
+	model = "ST-Ericsson HREF (v60+) and TVK1281618 R2 UIB";
 	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
 
 	/* ST6G3244ME level translator for 1.8/2.9 V */
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 8f504edefd3f..e66fa59c2de6 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -353,11 +353,11 @@
 					 * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
 					 */
 					hrefv60_cfg1 {
-						pins ="GPIO65_F1";
+						pins = "GPIO65_F1";
 						ste,config = <&gpio_out_hi>;
 					};
 					hrefv60_cfg2 {
-						pins ="GPIO66_G3";
+						pins = "GPIO66_G3";
 						ste,config = <&gpio_out_lo>;
 					};
 				};
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
index 8142c017882c..4d741adc16cd 100644
--- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts
+++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
@@ -210,8 +210,8 @@
 		 * As we're dealing with 3wire SPI, we only define SCK
 		 * and MOSI (in the spec MOSI is called "SDA").
 		 */
-		gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index c9b906432341..1815361fe73c 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -755,14 +755,14 @@
 			status = "disabled";
 		};
 
-		vica: intc@10140000 {
+		vica: interrupt-controller@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x10140000 0x20>;
 		};
 
-		vicb: intc@10140020 {
+		vicb: interrupt-controller@10140020 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index b344b3748143..e2f0cdacba7d 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -17,6 +17,37 @@
 		reg = <0x00000000 0x20000000>;
 	};
 
+	battery: battery {
+		compatible = "simple-battery";
+		battery-type = "lithium-ion-polymer";
+	};
+
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "murata,ncp18wb473";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	en_3v3_reg: en_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "en-3v3-fixed-supply";
@@ -267,6 +298,8 @@
 		        max-frequency = <100000000>;
 			bus-width = <8>;
 			cap-mmc-highspeed;
+			no-sdio;
+			no-sd;
 			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc4_a_1_default>;
@@ -376,7 +409,7 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpio {
+				gpio {
 					/*
 					 * AB8500 GPIOs are numbered starting from 1, so the first
 					 * index 0 is what in the datasheet is called "GPIO1", and
@@ -398,13 +431,13 @@
 						     "PM_GPIO42"; /* AB8500 GPIO42 */
 				};
 
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ext_regulators: ab8500-ext-regulators {
+				ext_regulators: regulator-external {
 					ab8500_ext1_reg: ab8500_ext1 {
 						regulator-name = "ab8500-ext-supply1";
 					};
@@ -418,7 +451,7 @@
 					};
 				};
 
-				ab8500-regulators {
+				regulator {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
 					};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
new file mode 100644
index 000000000000..e036393d5415
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
@@ -0,0 +1,793 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung Galaxy Exhibit SGH-T599 also known as Codina-TMO,
+ * the "TMO" shall be read "T-Mobile" as this phone was produced exlusively
+ * for T-Mobile in the United States.
+ *
+ * This phone is closely related to the Codina, but has:
+ * - No CPU speed cap, full ~1GHz rate
+ * - Different power management IC, AB8505
+ * - As AB8505 has a micro USB phy, no TI TSU6111
+ * - Different power routing such as the removal of the external LDO for the
+ *   touchscreen in favor of using the AB8505
+ * - Using a regulator for the key backlight LED
+ * - Using the Samsung S6D27A1 panel by default
+ * - The panel is using one of the ordinary AB8505 regulators for 1.8V
+ * - WiFi/Bluetooth combi chip upgraded to BCM4334
+ * - GPIO for backlight control moved from 68 to 69
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8505.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy Exhibit (SGH-T599)";
+	compatible = "samsung,codina-tmo", "st-ericsson,u8500";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	battery: battery {
+		compatible = "samsung,eb425161lu";
+	};
+
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	/* TI TXS0206 level translator for 2.9 V */
+	sd_level_translator: regulator-gpio {
+		compatible = "regulator-fixed";
+
+		/* GPIO87 EN */
+		gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-name = "sd-level-translator";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+
+		startup-delay-us = <200>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_level_translator_default>;
+	};
+
+	/* External LDO MIC5366-3.3YMT for eMMC */
+	ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VMEM_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_ldo_en_default_mode>;
+	};
+
+	/*
+	 * External Ricoh RP152L010B-TR LCD LDO regulator for the display.
+	 * LCD_PWR_EN controls both the 3.0V output.
+	 */
+	lcd_3v0_reg: regulator-gpio-lcd-3v0 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_LCD_3.0V";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		/* GPIO219 controls this regulator */
+		gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pwr_en_default_mode>;
+	};
+
+	/*
+	 * This regulator is a GPIO line that drives the Broadcom WLAN
+	 * line WL_REG_ON high and enables the internal regulators
+	 * inside the chip. Unfortunatley it is erroneously named
+	 * WLAN_RST_N on the schematic but it is not a reset line.
+	 *
+	 * The voltage specified here is only used to determine the OCR mask,
+	 * the for the SDIO connector, the chip is actually connected
+	 * directly to VBAT.
+	 */
+	wl_reg: regulator-gpio-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "WL_REG_ON";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		startup-delay-us = <100000>;
+		/* GPIO215 (WLAN_RST_N to WL_REG_ON) */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_ldo_en_default>;
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		/* GPIO195 "MOT_EN" */
+		enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_default>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default_mode>;
+
+		button-home {
+			linux,code = <KEY_HOME>;
+			label = "HOME";
+			/* GPIO91 */
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		};
+		button-volup {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "VOL+";
+			/* GPIO67 */
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+		button-voldown {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "VOL-";
+			/* GPIO92 */
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	led-touchkeys {
+		compatible = "regulator-led";
+		vled-supply = <&ab8500_ldo_aux4_reg>; // 3.3V
+		default-state = "on";
+		function = LED_FUNCTION_KBD_BACKLIGHT;
+		color = <LED_COLOR_ID_WHITE>;
+	};
+
+	ktd253: backlight {
+		compatible = "kinetic,ktd253";
+		/* GPIO69 is used on Codina R0.4 and Codina TMO */
+		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		/* Default to 13/32 brightness */
+		default-brightness = <13>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ktd253_backlight_default_mode>;
+	};
+
+	/* Richtek RT8515GQW Flash LED Driver IC */
+	flash {
+		compatible = "richtek,rt8515";
+		/* GPIO 140 */
+		enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		/* GPIO 141 */
+		ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+		/*
+		 * RFS is 16 kOhm and RTS is 100 kOhm giving
+		 * the flash max current 343mA and torch max
+		 * current 55 mA.
+		 */
+		richtek,rfs-ohms = <16000>;
+		richtek,rts-ohms = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_flash_default_mode>;
+
+		led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+			flash-max-microamp = <343750>;
+			led-max-microamp = <55000>;
+		};
+	};
+
+	/* Bit-banged I2C on GPIO143 and GPIO144 also called "SUBPMU I2C" */
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* TODO: this should also be used by the SM5103 Camera power management unit */
+	};
+
+	/* Bit-banged I2C on GPIO151 and GPIO152 also called "COMP I2C" */
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_1_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		magnetometer@c {
+			compatible = "alps,hscdtd008a";
+			reg = <0x0c>;
+			clock-frequency = <400000>;
+
+			avdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+			dvdd-supply = <&ab8500_ldo_aux8_reg>; // 1.8V
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		/* Clock on GPIO220, pin SCL */
+		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+		/* MOSI on GPIO224, pin SDI "slave data in" */
+		mosi-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		/* MISO on GPIO225, pin SDO "slave data out" */
+		miso-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+		/* Chip select on GPIO201 */
+		cs-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		panel@0 {
+			compatible = "samsung,s6d27a1";
+			spi-max-frequency = <1200000>;
+			/* TYPE 3: inverse clock polarity and phase */
+			spi-cpha;
+			spi-cpol;
+
+			reg = <0>;
+			vci-supply = <&lcd_3v0_reg>;
+			vccio-supply = <&ab8500_ldo_aux6_reg>;
+
+			/* Reset on GPIO139 */
+			reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+			/* LCD_VGH/LCD_DETECT, ESD IRQ on GPIO93 */
+			interrupt-parent = <&gpio2>;
+			interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&panel_default_mode>;
+			backlight = <&ktd253>;
+
+			port {
+				panel_in: endpoint {
+					remote-endpoint = <&display_out>;
+				};
+			};
+		};
+	};
+
+	soc {
+		/* External Micro SD slot */
+		mmc@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+			/* MMC is powered by AUX3 1.2V .. 2.91V */
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			/* 2.9 V level translator is using AUX3 at 2.9 V as well */
+			vqmmc-supply = <&sd_level_translator>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_2_default>;
+			pinctrl-1 = <&mc0_a_2_sleep>;
+			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			status = "okay";
+		};
+
+		/* WLAN SDIO channel */
+		mmc@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			non-removable;
+			cap-sd-highspeed;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_2_default>;
+			pinctrl-1 = <&mc1_a_2_sleep>;
+			/*
+			 * GPIO-controlled voltage enablement: this drives
+			 * the WL_REG_ON line high when we use this device.
+			 * Represented as regulator to fill OCR mask.
+			 */
+			vmmc-supply = <&wl_reg>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			wifi@1 {
+				compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
+				reg = <1>;
+				/* GPIO216 WL_HOST_WAKE */
+				interrupt-parent = <&gpio6>;
+				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-names = "host-wake";
+				pinctrl-names = "default";
+				pinctrl-0 = <&wlan_default_mode>;
+			};
+		};
+
+		/* eMMC */
+		mmc@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <8>;
+			non-removable;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+			no-sdio;
+			no-sd;
+			vmmc-supply = <&ldo_3v3_reg>;
+			pinctrl-names = "default", "sleep";
+			/*
+			 * GPIO130 will be set to input no pull-up resulting in a resistor
+			 * pulling the reset high and taking the memory out of reset.
+			 */
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+			status = "okay";
+		};
+
+		/* GBF (Bluetooth) UART */
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+			status = "okay";
+
+			bluetooth {
+				/* BCM4334B0 actually */
+				compatible = "brcm,bcm4330-bt";
+				/* GPIO222 rail BT_VREG_EN to BT_REG_ON */
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+				/* BT_WAKE on GPIO199 */
+				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+				/* BT_HOST_WAKE on GPIO97 */
+				/* FIXME: convert to interrupt */
+				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				/* BT_RST_N on GPIO209 */
+				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bluetooth_default_mode>;
+			};
+		};
+
+		/* GPS UART */
+		uart@80121000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			/* CTS/RTS is not used, CTS is repurposed as GPIO */
+			pinctrl-0 = <&u1rxtx_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep>;
+			/* FIXME: add a device for the GPS here */
+		};
+
+		/* Debugging console UART connected to AB8505 */
+		uart@80007000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+		};
+
+		prcmu@80157000 {
+			ab8505 {
+				phy {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8500_fg {
+					line-impedance-micro-ohms = <36000>;
+				};
+
+				/* This is mostly identical to the Codina v0.4 regulators */
+				regulator {
+					ab8500_ldo_aux1 {
+						regulator-name = "v-sensors-vdd";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux2 {
+						regulator-name = "v-aux2";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux3 {
+						regulator-name = "v-mmc-sd";
+					};
+
+					ab8500_ldo_aux4 {
+						regulator-name = "v-aux4";
+						/*
+						 * Providing some span here makes the touchkey
+						 * LEDs actually dimmable.
+						 */
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux5 {
+						regulator-name = "v-aux5";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ab8500_ldo_aux6 {
+						/* 1.8 V to the display */
+						regulator-name = "v-aux6";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ab8500_ldo_aux8 {
+						regulator-name = "v-sensors-vio";
+					};
+				};
+			};
+		};
+
+		/* I2C0 also known as "AGC I2C" */
+		i2c@80004000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+
+			proximity@39 {
+				/* Codina has the Amstaos TMD2672 */
+				compatible = "amstaos,tmd2672";
+				clock-frequency = <400000>;
+				reg = <0x39>;
+
+				/* IRQ on GPIO146 "PS_INT" */
+				interrupt-parent = <&gpio4>;
+				interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&ab8500_ldo_aux8_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tmd2672_codina_default>;
+			};
+		};
+
+		/* I2C2 on GPIO10 and GPIO11 also called "SENSORS I2C" */
+		i2c@80128000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+
+			/* Bosch BMA254 accelerometer */
+			accelerometer@18 {
+				compatible = "bosch,bma254";
+				reg = <0x18>;
+				mount-matrix = "0", "1", "0",
+					       "-1", "0", "0",
+					       "0", "0", "1";
+				vddio-supply = <&ab8500_ldo_aux8_reg>; // 1.8V
+				vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+			};
+		};
+
+		/* I2C3 */
+		i2c@80110000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+
+			/* TODO: write bindings and driver for this touchscreen */
+
+			/* Zinitix BT404 ISP part */
+			isp@50 {
+				compatible = "zinitix,bt404-isp";
+				reg = <0x50>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsp_default>;
+			};
+
+			/* Zinitix BT404 touchscreen, also has the touchkeys for menu and back */
+			touchscreen@20 {
+				compatible = "zinitix,bt404";
+				reg = <0x20>;
+				/* GPIO218 (TSP_INT_1V8) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+				vcca-supply = <&ab8500_ldo_aux2_reg>; // 3.3V
+				vdd-supply = <&ab8500_ldo_aux5_reg>; // 1.8V
+				zinitix,mode = <2>;
+				touchscreen-size-x = <480>;
+				touchscreen-size-y = <800>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsp_default>;
+			};
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dpi_default_mode>;
+
+			port {
+				display_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	/*
+	 * This extends the MC0_A_2 default config to include
+	 * the card detect GPIO217 line.
+	 */
+	sdi0 {
+		mc0_a_2_default {
+			default_cfg4 {
+				pins = "GPIO217_AH12"; /* card detect */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	sdi2 {
+		/*
+		 * GPIO130 should be set in GPIO mode and
+		 * pulled down. (Not connected.)
+		 */
+		mc2_a_1_default {
+			default_cfg2 {
+				pins = "GPIO130_C8"; /* FBCLK */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	/* GPIO that enables the 2.9V SD card level translator */
+	sd-level-translator {
+		sd_level_translator_default: sd_level_translator_default {
+			/* level shifter on GPIO87 */
+			codina_cfg1 {
+				pins = "GPIO87_B3";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the eMMC */
+	emmc-ldo {
+		emmc_ldo_en_default_mode: emmc_ldo_default {
+			/* LDO enable on GPIO223 */
+			codina_cfg1 {
+				pins = "GPIO223_AH9";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIOs for panel control */
+	panel {
+		panel_default_mode: panel_default {
+			codina_cfg1 {
+				/* Reset line */
+				pins = "GPIO139_C9";
+				ste,config = <&gpio_out_lo>;
+			};
+			codina_cfg2 {
+				/* ESD IRQ line "LCD detect" */
+				pins = "GPIO93_B7";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the LCD display */
+	lcd-ldo {
+		lcd_pwr_en_default_mode: lcd_pwr_en_default {
+			/* LCD_PWR_EN on GPIO219 */
+			codina_cfg1 {
+				pins = "GPIO219_AG10";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the WLAN internal LDO regulators */
+	wlan-ldo {
+		wlan_ldo_en_default: wlan_ldo_default {
+			/* GPIO215 named WLAN_RST_N */
+			codina_cfg1 {
+				pins = "GPIO215_AH13";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* Backlight GPIO */
+	backlight {
+		ktd253_backlight_default_mode: backlight_default {
+			skomer_cfg1 {
+				pins = "GPIO69_E2"; /* LCD_BL_CTRL */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* Flash and torch */
+	flash {
+		gpio_flash_default_mode: flash_default {
+			codina_cfg1 {
+				pins = "GPIO140_B11", "GPIO141_C12";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO keys */
+	gpio-keys {
+		gpio_keys_default_mode: gpio_keys_default {
+			skomer_cfg1 {
+				pins = "GPIO67_G2", /* VOL UP */
+				       "GPIO91_B6", /* HOME */
+				       "GPIO92_D6"; /* VOL DOWN */
+				ste,config = <&gpio_in_pu>;
+			};
+		};
+	};
+	/* Interrupt line for the Zinitix BT404 touchscreen */
+	tsp {
+		tsp_default: tsp_default {
+			codina_cfg1 {
+				pins = "GPIO218_AH11";	/* TSP_INT_1V8 */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* Interrupt line for light/proximity sensor TMD2672 */
+	tmd2672 {
+		tmd2672_codina_default: tmd2672_codina {
+			codina_cfg1 {
+				pins = "GPIO146_D13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for subpmu */
+	i2c-gpio-0 {
+		i2c_gpio_0_default: i2c_gpio_0 {
+			codina_cfg1 {
+				pins = "GPIO143_D12", "GPIO144_B13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for the NFC */
+	i2c-gpio-1 {
+		i2c_gpio_1_default: i2c_gpio_1 {
+			codina_cfg1 {
+				pins = "GPIO151_D17", "GPIO152_D16";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based SPI bus for the display */
+	spi-gpio-0 {
+		spi_gpio_0_default: spi_gpio_0_d {
+			codina_cfg1 {
+				pins = "GPIO220_AH10", "GPIO201_AF24", "GPIO224_AG9";
+				ste,config = <&gpio_out_hi>;
+			};
+			codina_cfg2 {
+				pins = "GPIO225_AG8";
+				/* Needs pull down, no pull down resistor on board */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+		spi_gpio_0_sleep: spi_gpio_0_s {
+			codina_cfg1 {
+				pins = "GPIO220_AH10", "GPIO201_AF24",
+				       "GPIO224_AG9", "GPIO225_AG8";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	wlan {
+		wlan_default_mode: wlan_default {
+			/* GPIO216 for WL_HOST_WAKE */
+			codina_cfg2 {
+				pins = "GPIO216_AG12";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	bluetooth {
+		bluetooth_default_mode: bluetooth_default {
+			/* GPIO199 BT_WAKE and GPIO222 BT_VREG_ON */
+			codina_cfg1 {
+				pins = "GPIO199_AH23", "GPIO222_AJ9";
+				ste,config = <&gpio_out_lo>;
+			};
+			/* GPIO97 BT_HOST_WAKE */
+			codina_cfg2 {
+				pins = "GPIO97_D9";
+				ste,config = <&gpio_in_nopull>;
+			};
+			/* GPIO209 BT_RST_N */
+			codina_cfg3 {
+				pins = "GPIO209_AG15";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	vibrator {
+		vibrator_default: vibrator_default {
+			codina_cfg1 {
+				pins = "GPIO195_AG28";	/* MOT_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	mcde {
+		dpi_default_mode: dpi_default {
+			default_mux1 {
+				/* Mux in all the data lines */
+				function = "lcd";
+				groups =
+					/* Data lines D0-D7 GPIO70..GPIO77 */
+					"lcd_d0_d7_a_1",
+					/* Data lines D8-D11 GPIO78..GPIO81 */
+					"lcd_d8_d11_a_1",
+					/* Data lines D12-D15 GPIO82..GPIO85 */
+					"lcd_d12_d15_a_1",
+					/* Data lines D16-D23 GPIO161..GPIO168 */
+					"lcd_d16_d23_b_1";
+			};
+			default_mux2 {
+				function = "lcda";
+				/* Clock line on GPIO150, DE, VSO, HSO on GPIO169..GPIO171 */
+				groups = "lcdaclk_b_1", "lcda_b_1";
+			};
+			/* Input, no pull-up is the default state for pins used for an alt function */
+			default_cfg1 {
+				pins = "GPIO150_C14", "GPIO169_D22", "GPIO170_C23", "GPIO171_D23";
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
new file mode 100644
index 000000000000..1a6d24a7ccb8
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
@@ -0,0 +1,953 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung Galaxy Ace 2 GT-I8160 also known as Codina.
+ *
+ * NOTE: this is the most common variant according to the vendor tree, known
+ * as "R0.0". There appears to be a "R0.4" variant with backlight on GPIO69,
+ * AB8505 and other changes. There is also talk about some variants having a
+ * Samsung S6D27A1 display, indicated by passing a different command line from
+ * the boot loader.
+ *
+ * The Samsung tree further talks about GT-I8160P and GT-I8160chn (China).
+ * The GT-I8160 plain is known as the "europe" variant.
+ * The GT-I8160P is the CDMA version and it appears to not use the ST
+ * Microelectronics accelerometer and reportedly has NFC mounted.
+ * The GT-I8160chn appears to be the same as the europe variant.
+ *
+ * There is also the Codina-TMO, Samsung SGH-T599, which has its own device
+ * tree.
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8500.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy Ace 2 (GT-I8160)";
+	compatible = "samsung,codina", "st-ericsson,u8500";
+
+	cpus {
+		cpu@300 {
+			/*
+			 * This has a frequency cap at ~800 MHz in the firmware.
+			 * (Changing this number here will not overclock it.)
+			 */
+			operating-points = <798720 0
+					    399360 0
+					    199680 0>;
+		};
+	};
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	battery: battery {
+		compatible = "samsung,eb425161lu";
+	};
+
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	/* TI TXS0206 level translator for 2.9 V */
+	sd_level_translator: regulator-gpio {
+		compatible = "regulator-fixed";
+
+		/* GPIO87 EN */
+		gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-name = "sd-level-translator";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+
+		startup-delay-us = <200>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_level_translator_default>;
+	};
+
+	/* External LDO MIC5366-3.3YMT for eMMC */
+	ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VMEM_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_ldo_en_default_mode>;
+	};
+
+	/*
+	 * External Ricoh "TSP" regulator for the touchscreen.
+	 * One GPIO line controls two voltages of 3.3V and 1.8V
+	 * this line is known as "TSP_LDO_ON1" in the schematics.
+	 */
+	ldo_tsp_3v3_reg: regulator-gpio-tsp-ldo-3v3 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "LDO_TSP_A3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* GPIO94 controls this regulator */
+		gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+		/* 70 ms power-on delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_ldo_en_default_mode>;
+	};
+	ldo_tsp_1v8_reg: regulator-gpio-tsp-ldo-1v8 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_TSP_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		/* GPIO94 controls this regulator */
+		gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+		/* 70 ms power-on delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_ldo_en_default_mode>;
+	};
+
+	/*
+	 * External Ricoh RP152L010B-TR LCD LDO regulator for the display.
+	 * LCD_PWR_EN controls both a 3.0V and 1.8V output.
+	 */
+	lcd_3v0_reg: regulator-gpio-lcd-3v0 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_LCD_3.0V";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		/* GPIO219 controls this regulator */
+		gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pwr_en_default_mode>;
+	};
+	lcd_1v8_reg: regulator-gpio-lcd-1v8 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_LCD_1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		/* GPIO219 controls this regulator too */
+		gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pwr_en_default_mode>;
+	};
+
+	/*
+	 * This regulator is a GPIO line that drives the Broadcom WLAN
+	 * line WL_REG_ON high and enables the internal regulators
+	 * inside the chip. Unfortunatley it is erroneously named
+	 * WLAN_RST_N on the schematic but it is not a reset line.
+	 *
+	 * The voltage specified here is only used to determine the OCR mask,
+	 * the for the SDIO connector, the chip is actually connected
+	 * directly to VBAT.
+	 */
+	wl_reg: regulator-gpio-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "WL_REG_ON";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		startup-delay-us = <100000>;
+		/* GPIO215 (WLAN_RST_N to WL_REG_ON) */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_ldo_en_default>;
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		/* GPIO195 "MOT_EN" */
+		enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_default>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default_mode>;
+
+		button-home {
+			linux,code = <KEY_HOME>;
+			label = "HOME";
+			/* GPIO91 */
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		};
+		button-volup {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "VOL+";
+			/* GPIO67 */
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+		button-voldown {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "VOL-";
+			/* GPIO92 */
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds_default_mode>;
+		touchkey-led {
+			label = "touchkeys";
+			/*
+			 * GPIO194 on R0.0, R0.4 does not use this at all, it
+			 * will instead turn LDO AUX4 on/off for key led backlighy.
+			 * (Line is pulled down on R0.4)
+			 */
+			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	ktd253: backlight {
+		compatible = "kinetic,ktd253";
+		/*
+		 * GPIO68 is for R0.0, the board file talks about a TMO variant
+		 * (R0.4) using GPIO69.
+		 */
+		enable-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+		/* Default to 13/32 brightness */
+		default-brightness = <13>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ktd253_backlight_default_mode>;
+	};
+
+	/* Richtek RT8515GQW Flash LED Driver IC */
+	flash {
+		compatible = "richtek,rt8515";
+		/* GPIO 140 */
+		enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		/* GPIO 141 */
+		ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+		/*
+		 * RFS is 16 kOhm and RTS is 100 kOhm giving
+		 * the flash max current 343mA and torch max
+		 * current 55 mA.
+		 */
+		richtek,rfs-ohms = <16000>;
+		richtek,rts-ohms = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_flash_default_mode>;
+
+		led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+			flash-max-microamp = <343750>;
+			led-max-microamp = <55000>;
+		};
+	};
+
+	/* Bit-banged I2C on GPIO143 and GPIO144 also called "SUBPMU I2C" */
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		magnetometer@c {
+			compatible = "alps,hscdtd008a";
+			reg = <0x0c>;
+			clock-frequency = <400000>;
+
+			avdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+			dvdd-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
+		};
+		/* TODO: this should also be used by the SM5103 Camera power management unit */
+	};
+
+	/* Bit-banged I2C on GPIO151 and GPIO152 also called "NFC I2C" */
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_1_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nfc@2b {
+			/* NXP NFC circuit PN544 C1 marked NXP 44501  */
+			compatible = "nxp,pn544-i2c";
+			/* IF0, IF1 high, gives I2C address 0x2B */
+			reg = <0x2b>;
+			clock-frequency = <400000>;
+			/* NFC IRQ on GPIO32 */
+			interrupt-parent = <&gpio1>;
+			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+			/* GPIO 31 */
+			firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+			/* GPIO88 */
+			enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pn544_codina_default>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		/* Clock on GPIO220, pin SCL */
+		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+		/* MOSI on GPIO224, pin SDI "slave data in" */
+		mosi-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		/* MISO on GPIO225, pin SDO "slave data out" */
+		miso-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+		/* Chip select on GPIO201 */
+		cs-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * Some Codinas (90%) have a WideChips WS2401-based LMS380KF01
+		 * display mounted and some 10% has a Samsung S6D27A1 instead.
+		 * The boot loader needs to modify this compatible to
+		 * correspond to whatever is passed from the early Samsung boot.
+		 */
+		panel@0 {
+			compatible = "samsung,lms380kf01";
+			spi-max-frequency = <1200000>;
+			/* TYPE 3: inverse clock polarity and phase */
+			spi-cpha;
+			spi-cpol;
+
+			reg = <0>;
+			vci-supply = <&lcd_3v0_reg>;
+			vccio-supply = <&lcd_1v8_reg>;
+
+			/* Reset on GPIO139 */
+			reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+			/* LCD_VGH/LCD_DETECT, ESD IRQ on GPIO93 */
+			interrupt-parent = <&gpio2>;
+			interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&panel_default_mode>;
+			backlight = <&ktd253>;
+
+			port {
+				panel_in: endpoint {
+					remote-endpoint = <&display_out>;
+				};
+			};
+		};
+	};
+
+	soc {
+		/* External Micro SD slot */
+		mmc@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+			/* MMC is powered by AUX3 1.2V .. 2.91V */
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			/* 2.9 V level translator is using AUX3 at 2.9 V as well */
+			vqmmc-supply = <&sd_level_translator>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_2_default>;
+			pinctrl-1 = <&mc0_a_2_sleep>;
+			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			status = "okay";
+		};
+
+		/* WLAN SDIO channel */
+		mmc@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			non-removable;
+			cap-sd-highspeed;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_2_default>;
+			pinctrl-1 = <&mc1_a_2_sleep>;
+			/*
+			 * GPIO-controlled voltage enablement: this drives
+			 * the WL_REG_ON line high when we use this device.
+			 * Represented as regulator to fill OCR mask.
+			 */
+			vmmc-supply = <&wl_reg>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			wifi@1 {
+				/* Actually BRCM4330 */
+				compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
+				reg = <1>;
+				/* GPIO216 WL_HOST_WAKE */
+				interrupt-parent = <&gpio6>;
+				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-names = "host-wake";
+				pinctrl-names = "default";
+				pinctrl-0 = <&wlan_default_mode>;
+			};
+		};
+
+		/* eMMC */
+		mmc@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <8>;
+			non-removable;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+			no-sdio;
+			no-sd;
+			vmmc-supply = <&ldo_3v3_reg>;
+			pinctrl-names = "default", "sleep";
+			/*
+			 * GPIO130 will be set to input no pull-up resulting in a resistor
+			 * pulling the reset high and taking the memory out of reset.
+			 */
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+			status = "okay";
+		};
+
+		/* GBF (Bluetooth) UART */
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+			status = "okay";
+
+			bluetooth {
+				compatible = "brcm,bcm4330-bt";
+				/* GPIO222 rail BT_VREG_EN to BT_REG_ON */
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+				/* BT_WAKE on GPIO199 */
+				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+				/* BT_HOST_WAKE on GPIO97 */
+				/* FIXME: convert to interrupt */
+				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				/* BT_RST_N on GPIO209 */
+				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bluetooth_default_mode>;
+			};
+		};
+
+		/* GPS UART */
+		uart@80121000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+
+			gnss {
+				compatible = "brcm,bcm4751";
+				/* GPS_RSTN on GPIO21 */
+				reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+				/* GPS_ON_OFF on GPIO86 */
+				enable-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+				/* GPS_1V8 (VSMPS2) */
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bcm4751_codina_default>;
+			};
+		};
+
+		/* Debugging console UART connected to TSU6111RSVR (FSA880) */
+		uart@80007000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+		};
+
+		prcmu@80157000 {
+			ab8500 {
+				phy {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8500_fg {
+					line-impedance-micro-ohms = <36000>;
+				};
+
+				regulator {
+					ab8500_ldo_aux1 {
+						/* Used for VDD for sensors */
+						regulator-name = "V-SENSORS-VDD";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					ab8500_ldo_aux2 {
+						/* Used for VIO for sensors */
+						regulator-name = "V-SENSORS-VIO";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ab8500_ldo_aux3 {
+						/* Used for voltage for external MMC/SD card */
+						regulator-name = "V-MMC-SD";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <2910000>;
+					};
+				};
+			};
+		};
+
+		/* I2C0 also known as "AGC I2C" */
+		i2c@80004000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+
+			proximity@39 {
+				/* Codina has the Amstaos TMD2672 */
+				compatible = "amstaos,tmd2672";
+				clock-frequency = <400000>;
+				reg = <0x39>;
+
+				/* IRQ on GPIO146 "PS_INT" */
+				interrupt-parent = <&gpio4>;
+				interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+				/* FIXME: needs a VDDIO supply that is connected to a pull-up resistor */
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tms2672_codina_default>;
+			};
+		};
+
+		/* I2C1 on GPIO16 and GPIO17 also called "MUS I2C" */
+		i2c@80122000 {
+			status = "okay";
+			pinctrl-names = "default","sleep";
+			/* FIXME: If it doesn't work try what we use on Gavini */
+			pinctrl-0 = <&i2c1_b_2_default>;
+			pinctrl-1 = <&i2c1_b_2_sleep>;
+
+			/* Texas Instruments TSU6111 micro USB switch */
+			usb-switch@25 {
+				compatible = "ti,tsu6111";
+				reg = <0x25>;
+				/* Interrupt JACK_INT_N on GPIO95 */
+				interrupt-parent = <&gpio2>;
+				interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsu6111_codina_default>;
+			};
+		};
+
+		/* I2C2 on GPIO10 and GPIO11 also called "SENSORS I2C" */
+		i2c@80128000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+
+			lisd3dh@19 {
+				/* ST Microelectronics Accelerometer */
+				compatible = "st,lis3dh-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x19>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+				vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
+				mount-matrix = "0", "1", "0",
+					       "-1", "0", "0",
+					       "0", "0", "1";
+			};
+		};
+
+		/* I2C3 */
+		i2c@80110000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+
+			/* TODO: write bindings and driver for this touchscreen */
+
+			/* Zinitix BT404 ISP part */
+			isp@50 {
+				compatible = "zinitix,bt404-isp";
+				reg = <0x50>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsp_default>;
+			};
+
+			/* Zinitix BT404 touchscreen, also has the touchkeys for menu and back */
+			touchscreen@20 {
+				compatible = "zinitix,bt404";
+				reg = <0x20>;
+				/* GPIO218 (TSP_INT_1V8) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+				vcca-supply = <&ldo_tsp_3v3_reg>;
+				vdd-supply = <&ldo_tsp_1v8_reg>;
+				zinitix,mode = <2>;
+				touchscreen-size-x = <480>;
+				touchscreen-size-y = <800>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsp_default>;
+			};
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dpi_default_mode>;
+
+			port {
+				display_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	/*
+	 * This extends the MC0_A_2 default config to include
+	 * the card detect GPIO217 line.
+	 */
+	sdi0 {
+		mc0_a_2_default {
+			default_cfg4 {
+				pins = "GPIO217_AH12"; /* card detect */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	sdi2 {
+		/*
+		 * This will make the resistor mounted in R0.0 pull up
+		 * the reset line and take the eMMC out of reset. On
+		 * R0.4 variants, GPIO130 should be set in GPIO mode and
+		 * pulled down. (Not connected.)
+		 */
+		mc2_a_1_default {
+			default_cfg2 {
+				pins = "GPIO130_C8"; /* FBCLK */
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+	/* GPIO that enables the 2.9V SD card level translator */
+	sd-level-translator {
+		sd_level_translator_default: sd_level_translator_default {
+			/* level shifter on GPIO87 */
+			codina_cfg1 {
+				pins = "GPIO87_B3";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the eMMC */
+	emmc-ldo {
+		emmc_ldo_en_default_mode: emmc_ldo_default {
+			/* LDO enable on GPIO223 */
+			codina_cfg1 {
+				pins = "GPIO223_AH9";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIOs for panel control */
+	panel {
+		panel_default_mode: panel_default {
+			codina_cfg1 {
+				/* Reset line */
+				pins = "GPIO139_C9";
+				ste,config = <&gpio_out_lo>;
+			};
+			codina_cfg2 {
+				/* ESD IRQ line "LCD detect" */
+				pins = "GPIO93_B7";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the touchscreen */
+	tsp-ldo {
+		tsp_ldo_en_default_mode: tsp_ldo_default {
+			/* LDO enable on GPIO94 */
+			gavini_cfg1 {
+				pins = "GPIO94_D7";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the LCD display */
+	lcd-ldo {
+		lcd_pwr_en_default_mode: lcd_pwr_en_default {
+			/* LCD_PWR_EN on GPIO219 */
+			codina_cfg1 {
+				pins = "GPIO219_AG10";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the key LED */
+	key-led {
+		gpio_leds_default_mode: en_led_ldo_default {
+			/* EN_LED_LDO on GPIO194 */
+			codina_cfg1 {
+				pins = "GPIO194_AF27";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the WLAN internal LDO regulators */
+	wlan-ldo {
+		wlan_ldo_en_default: wlan_ldo_default {
+			/* GPIO215 named WLAN_RST_N */
+			codina_cfg1 {
+				pins = "GPIO215_AH13";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* Backlight GPIO */
+	backlight {
+		ktd253_backlight_default_mode: backlight_default {
+			skomer_cfg1 {
+				pins = "GPIO68_E1"; /* LCD_BL_CTRL */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* Flash and torch */
+	flash {
+		gpio_flash_default_mode: flash_default {
+			codina_cfg1 {
+				pins = "GPIO140_B11", "GPIO141_C12";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO keys */
+	gpio-keys {
+		gpio_keys_default_mode: gpio_keys_default {
+			skomer_cfg1 {
+				pins = "GPIO67_G2", /* VOL UP */
+				       "GPIO91_B6", /* HOME */
+				       "GPIO92_D6"; /* VOL DOWN */
+				ste,config = <&gpio_in_pu>;
+			};
+		};
+	};
+	/* Interrupt line for the Zinitix BT404 touchscreen */
+	tsp {
+		tsp_default: tsp_default {
+			codina_cfg1 {
+				pins = "GPIO218_AH11";	/* TSP_INT_1V8 */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* Interrupt line for light/proximity sensor TMS2672 */
+	tms2672 {
+		tms2672_codina_default: tms2672_codina {
+			codina_cfg1 {
+				pins = "GPIO146_D13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for subpmu */
+	i2c-gpio-0 {
+		i2c_gpio_0_default: i2c_gpio_0 {
+			codina_cfg1 {
+				pins = "GPIO143_D12", "GPIO144_B13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for the NFC */
+	i2c-gpio-1 {
+		i2c_gpio_1_default: i2c_gpio_1 {
+			codina_cfg1 {
+				pins = "GPIO151_D17", "GPIO152_D16";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based SPI bus for the display */
+	spi-gpio-0 {
+		spi_gpio_0_default: spi_gpio_0_d {
+			codina_cfg1 {
+				pins = "GPIO220_AH10", "GPIO201_AF24", "GPIO224_AG9";
+				ste,config = <&gpio_out_hi>;
+			};
+			codina_cfg2 {
+				pins = "GPIO225_AG8";
+				/* Needs pull down, no pull down resistor on board */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+		spi_gpio_0_sleep: spi_gpio_0_s {
+			codina_cfg1 {
+				pins = "GPIO220_AH10", "GPIO201_AF24",
+				       "GPIO224_AG9", "GPIO225_AG8";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	wlan {
+		wlan_default_mode: wlan_default {
+			/* GPIO216 for WL_HOST_WAKE */
+			codina_cfg2 {
+				pins = "GPIO216_AG12";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	bluetooth {
+		bluetooth_default_mode: bluetooth_default {
+			/* GPIO199 BT_WAKE and GPIO222 BT_VREG_ON */
+			codina_cfg1 {
+				pins = "GPIO199_AH23", "GPIO222_AJ9";
+				ste,config = <&gpio_out_lo>;
+			};
+			/* GPIO97 BT_HOST_WAKE */
+			codina_cfg2 {
+				pins = "GPIO97_D9";
+				ste,config = <&gpio_in_nopull>;
+			};
+			/* GPIO209 BT_RST_N */
+			codina_cfg3 {
+				pins = "GPIO209_AG15";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* Interrupt line for TI TSU6111 Micro USB switch */
+	tsu6111 {
+		tsu6111_codina_default: tsu6111_codina {
+			codina_cfg1 {
+				/* GPIO95 used for IRQ */
+				pins = "GPIO95_E8";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	nfc {
+		pn544_codina_default: pn544_codina {
+			/* Interrupt line */
+			codina_cfg1 {
+				pins = "GPIO32_V2";
+				ste,config = <&gpio_in_nopull>;
+			};
+			/* Enable and firmware GPIOs */
+			codina_cfg2 {
+				pins = "GPIO31_V3", "GPIO88_C4";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	bcm4751 {
+		bcm4751_codina_default: bcm4751_codina {
+			/* Reset line, start out asserted */
+			codina_cfg1 {
+				pins = "GPIO21_AB3";
+				ste,config = <&gpio_out_lo>;
+			};
+			/* GPS_ON_OFF, start out deasserted (off) */
+			codina_cfg2 {
+				pins = "GPIO86_C6";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	vibrator {
+		vibrator_default: vibrator_default {
+			codina_cfg1 {
+				pins = "GPIO195_AG28";	/* MOT_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	mcde {
+		dpi_default_mode: dpi_default {
+			default_mux1 {
+				/* Mux in all the data lines */
+				function = "lcd";
+				groups =
+					/* Data lines D0-D7 GPIO70..GPIO77 */
+					"lcd_d0_d7_a_1",
+					/* Data lines D8-D11 GPIO78..GPIO81 */
+					"lcd_d8_d11_a_1",
+					/* Data lines D12-D15 GPIO82..GPIO85 */
+					"lcd_d12_d15_a_1",
+					/* Data lines D16-D23 GPIO161..GPIO168 */
+					"lcd_d16_d23_b_1";
+			};
+			default_mux2 {
+				function = "lcda";
+				/* Clock line on GPIO150, DE, VSO, HSO on GPIO169..GPIO171 */
+				groups = "lcdaclk_b_1", "lcda_b_1";
+			};
+			/* Input, no pull-up is the default state for pins used for an alt function */
+			default_cfg1 {
+				pins = "GPIO150_C14", "GPIO169_D22", "GPIO170_C23", "GPIO171_D23";
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
new file mode 100644
index 000000000000..5b445fa4c8c0
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
@@ -0,0 +1,887 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung Galaxy Beam GT-I8530 also known as Gavini.
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8500.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy Beam (GT-I8530)";
+	compatible = "samsung,gavini", "st-ericsson,u8500";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	battery: battery {
+		compatible = "samsung,eb585157lu";
+	};
+
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	/* TI TXS0206 level translator for 2.9 V */
+	sd_level_translator: regulator-gpio {
+		compatible = "regulator-fixed";
+
+		/* GPIO193 EN */
+		gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-name = "sd-level-translator";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+
+		startup-delay-us = <200>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_level_translator_default>;
+	};
+
+	/* External LDO for eMMC LDO VMEM_3V3 controlled by GPIO6 */
+	ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VMEM_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>; // FIXME
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_ldo_en_default_mode>;
+	};
+
+	/*
+	 * External Ricoh "TSP" regulator for the touchscreen.
+	 * One GPIO line controls two voltages of 3.3V and 1.8V
+	 * this line is known as "TSP_LDO_ON1" in the schematics.
+	 */
+	ldo_tsp_3v3_reg: regulator-gpio-tsp-ldo-3v3 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "LDO_TSP_A3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* GPIO94 controls this regulator */
+		gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+		/* 70 ms power-on delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_ldo_en_default_mode>;
+	};
+	ldo_tsp_1v8_reg: regulator-gpio-tsp-ldo-1v8 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_TSP_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		/* GPIO94 controls this regulator */
+		gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+		/* 70 ms power-on delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_ldo_en_default_mode>;
+	};
+
+	/*
+	 * External Ricoh RP152L010B-TR LCD LDO regulator for the display.
+	 * LCD_PWR_EN controls both a 3.0V and 1.8V output.
+	 */
+	lcd_3v0_reg: regulator-gpio-lcd-3v0 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_LCD_3V0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		/* GPIO219 controls this regulator */
+		gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pwr_en_default_mode>;
+	};
+	lcd_1v8_reg: regulator-gpio-lcd-1v8 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_LCD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		/* GPIO219 controls this regulator too */
+		gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pwr_en_default_mode>;
+	};
+
+	/*
+	 * This regulator is a GPIO line that drives the Broadcom WLAN
+	 * line WL_REG_ON high and enables the internal regulators
+	 * inside the chip. Unfortunatley it is erroneously named
+	 * WLAN_RST_N on the schematic but it is not a reset line.
+	 *
+	 * The voltage specified here is only used to determine the OCR mask,
+	 * the for the SDIO connector, the chip is actually connected
+	 * directly to VBAT.
+	 */
+	wl_reg: regulator-gpio-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "WL_REG_ON";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		startup-delay-us = <100000>;
+		/* GPIO215 (WLAN_RST_N to WL_REG_ON) */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_ldo_en_default>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default_mode>;
+
+		button-projector {
+			linux,code = <KEY_SWITCHVIDEOMODE>;
+			label = "Projector";
+			/* GPIO32 "Projector On HotKey" */
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+		button-home {
+			linux,code = <KEY_HOME>;
+			label = "HOME";
+			/* GPIO91 */
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		};
+		button-volup {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "VOL+";
+			/* GPIO67 */
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+		button-voldown {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "VOL-";
+			/* GPIO92 */
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* Richtek RT8515GQW Flash LED Driver IC */
+	flash {
+		compatible = "richtek,rt8515";
+		/* GPIO 140 */
+		enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		/* GPIO 141 */
+		ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+		/*
+		 * RFS is 16 kOhm and RTS is 100 kOhm giving
+		 * the flash max current 343mA and torch max
+		 * current 55 mA.
+		 */
+		richtek,rfs-ohms = <16000>;
+		richtek,rts-ohms = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_flash_default_mode>;
+
+		led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+			flash-max-microamp = <343750>;
+			led-max-microamp = <55000>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds_default_mode>;
+		used-led {
+			label = "touchkeys";
+			/* GPIO68 */
+			gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	ktd259: backlight {
+		compatible = "kinetic,ktd259";
+		/* GPIO20 */
+		enable-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+		/* Default to 13/32 brightness */
+		default-brightness = <13>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ktd259_backlight_default_mode>;
+	};
+
+	/* Bit-banged I2C on GPIO143 and GPIO144 also called "SUBPMU I2C" */
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Yamaha YAS530 magnetometer */
+		magnetometer@2e {
+			compatible = "yamaha,yas530";
+			reg = <0x2e>;
+			/* VDD 3V */
+			vdd-supply = <&ab8500_ldo_aux1_reg>;
+			/* IOVDD 1.8V */
+			iovdd-supply = <&ab8500_ldo_aux2_reg>;
+			/* GPIO204 COMPASS_RST_N */
+			reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&yas530_default>;
+		};
+		/* TODO: this should also be used by the NCP6914 Camera power management unit */
+	};
+
+	/*
+	 * TODO: See if we can use the PL023 for this instead.
+	 */
+	spi {
+		compatible = "spi-gpio";
+		/* Clock on GPIO220, pin SCL */
+		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+		/* MOSI on GPIO224, pin SDI "slave data in" */
+		mosi-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		/* MISO on GPIO225, pin SDO "slave data out" */
+		miso-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+		/* Chip select on GPIO223 */
+		cs-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		panel@0 {
+			compatible = "samsung,lms397kf04";
+			/* 300 ns at read cycle -> 3 MHz max speed */
+			//spi-max-frequency = <3000000>;
+			spi-max-frequency = <1200000>;
+			/* TYPE 3: inverse clock polarity and phase */
+			spi-cpha;
+			spi-cpol;
+
+			reg = <0>;
+			vci-supply = <&lcd_3v0_reg>;
+			vccio-supply = <&lcd_1v8_reg>;
+			/* Reset on GPIO139 */
+			reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&panel_default_mode>;
+			backlight = <&ktd259>;
+
+			port {
+				panel_in: endpoint {
+					remote-endpoint = <&display_out>;
+				};
+			};
+		};
+	};
+
+	/* Bit-banged I2C on GPIO201 and GPIO202 also called "MOT_I2C" */
+	i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio6 10 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio6 9 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_2_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* TODO: add the Immersion ISA1200 I2C device here */
+	};
+
+	/* Bit-banged I2C on GPIO196 and GPIO197 also called "MPR_I2C" */
+	i2c-gpio-3 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio6 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio6 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_3_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* TODO: add the DPP2601 projector I2C device 0x1b here */
+	};
+
+	soc {
+		/* External Micro SD slot */
+		mmc@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+			/* MMC is powered by AUX3 1.2V .. 2.91V */
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			/* 2.9 V level translator */
+			vqmmc-supply = <&sd_level_translator>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_2_default>;
+			pinctrl-1 = <&mc0_a_2_sleep>;
+			/* "flash detect" actually card detect */
+			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>;
+			status = "okay";
+		};
+
+		/* WLAN SDIO channel */
+		mmc@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			non-removable;
+			cap-sd-highspeed;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_2_default>;
+			pinctrl-1 = <&mc1_a_2_sleep>;
+			/*
+			 * GPIO-controlled voltage enablement: this drives
+			 * the WL_REG_ON line high when we use this device.
+			 * Represented as regulator to fill OCR mask.
+			 */
+			vmmc-supply = <&wl_reg>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			wifi@1 {
+				compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
+				reg = <1>;
+				/* GPIO216 WL_HOST_WAKE */
+				interrupt-parent = <&gpio6>;
+				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-names = "host-wake";
+				pinctrl-names = "default";
+				pinctrl-0 = <&wlan_default_mode>;
+			};
+		};
+
+		/* eMMC */
+		mmc@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <50000000>;
+			bus-width = <8>;
+			non-removable;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+			no-sdio;
+			no-sd;
+			vmmc-supply = <&ldo_3v3_reg>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+			status = "okay";
+		};
+
+		/* GBF (Bluetooth) UART */
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+			status = "okay";
+
+			bluetooth {
+				compatible = "brcm,bcm4330-bt";
+				/* GPIO222 rail BT_VREG_EN to BT_REG_ON */
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+				/* BT_WAKE on GPIO199 */
+				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+				/* BT_HOST_WAKE on GPIO97 */
+				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				/* BT_RST_N on GPIO209 */
+				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bluetooth_default_mode>;
+			};
+		};
+
+		/* GPS UART */
+		uart@80121000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			/* CTS/RTS is not used, CTS is repurposed as GPIO */
+			pinctrl-0 = <&u1rxtx_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep>;
+			/* FIXME: add a device for the GPS here */
+		};
+
+		/* Debugging console UART connected to TSU6111RSVR (FSA880) */
+		uart@80007000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+		};
+
+		prcmu@80157000 {
+			ab8500 {
+				phy {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8500_fg {
+					line-impedance-micro-ohms = <43000>;
+				};
+
+				regulator {
+					ab8500_ldo_aux1 {
+						/* Used for VDD for sensors */
+						regulator-name = "V-SENSORS-VDD";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					ab8500_ldo_aux2 {
+						/* Used for VIO for sensors */
+						regulator-name = "V-SENSORS-VIO";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ab8500_ldo_aux3 {
+						/* Used for voltage for external MMC/SD card */
+						regulator-name = "V-MMC-SD";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <2910000>;
+					};
+				};
+			};
+		};
+
+		/* I2C0 */
+		i2c@80004000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+
+			/* FIXME: fix the proximity sensor bindings and driver */
+			proximity@39 {
+				/* Gavini has the GP2A030S00F proximity sensor */
+				compatible = "sharp,gp2a030s00f";
+				clock-frequency = <400000>;
+				reg = <0x39>;
+				/* FIXME: GPIO146 provides power on, IR LED? */
+			};
+
+			gyroscope@68 {
+				compatible = "invensense,mpu3050";
+				reg = <0x68>;
+				/* GPIO226 interrupt */
+				interrupt-parent = <&gpio7>;
+				interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+				mount-matrix = "0", "1", "0",
+					       "1", "0", "0",
+					       "0", "0", "1";
+				vlogic-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
+				vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+				pinctrl-names = "default";
+				pinctrl-0 = <&mpu3050_default>;
+
+				/*
+				 * The MPU-3050 acts as a hub for the
+				 * accelerometer.
+				 */
+				i2c-gate {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					/* Bosch BMA222E accelerometer */
+					accelerometer@18 {
+						compatible = "bosch,bma222e";
+						reg = <0x18>;
+						mount-matrix = "0", "-1", "0",
+							       "1", "0", "0",
+							       "0", "0", "1";
+						vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
+						vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+					};
+				};
+			};
+		};
+
+		/* I2C2 "AGC I2C" */
+		i2c@80128000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_b_1_default>;
+			pinctrl-1 = <&i2c2_b_1_sleep>;
+
+			/* Texas Instruments TSU6111 micro USB switch */
+			usb-switch@25 {
+				compatible = "ti,tsu6111";
+				reg = <0x25>;
+				/* Interrupt JACK_INT_N on GPIO95 */
+				interrupt-parent = <&gpio2>;
+				interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsu6111_default>;
+			};
+		};
+
+		/* I2C3 */
+		i2c@80110000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+
+			/* Melfas MMS136 touchscreen */
+			touchscreen@48 {
+				compatible = "melfas,mms136";
+				reg = <0x48>;
+				/* GPIO218 (TSP_INT_1V8) */
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+				/* AVDD is "analog supply", 2.57-3.47 V */
+				avdd-supply = <&ldo_tsp_3v3_reg>;
+				/* VDD is "digital supply" 1.71-3.47V */
+				vdd-supply = <&ldo_tsp_1v8_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tsp_default>;
+				touchscreen-size-x = <480>;
+				touchscreen-size-y = <800>;
+			};
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dpi_default_mode>;
+
+			port {
+				display_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	/*
+	 * This extends the MC0_A_2 default config to include
+	 * the card detect GPIO217 line.
+	 */
+	sdi0 {
+		mc0_a_2_default {
+			default_cfg4 {
+				pins = "GPIO217_AH12"; /* card detect */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	mcde {
+		dpi_default_mode: dpi_default {
+			default_mux1 {
+				/* Mux in all the data lines */
+				function = "lcd";
+				groups =
+					/* Data lines D0-D7 GPIO70..GPIO77 */
+					"lcd_d0_d7_a_1",
+					/* Data lines D8-D11 GPIO78..GPIO81 */
+					"lcd_d8_d11_a_1",
+					/* Data lines D12-D15 GPIO82..GPIO85 */
+					"lcd_d12_d15_a_1",
+					/* Data lines D16-D23 GPIO161..GPIO168 */
+					"lcd_d16_d23_b_1";
+			};
+			default_mux2 {
+				function = "lcda";
+				/* Clock line on GPIO150, DE, VSO, HSO on GPIO169..GPIO171 */
+				groups = "lcdaclk_b_1", "lcda_b_1";
+			};
+			/* Input, no pull-up is the default state for pins used for an alt function */
+			default_cfg1 {
+				pins = "GPIO150_C14", "GPIO169_D22", "GPIO170_C23", "GPIO171_D23";
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+	/* GPIO for panel reset control */
+	panel {
+		panel_default_mode: panel_default {
+			gavini_cfg1 {
+				/* Reset line */
+				pins = "GPIO139_C9";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the eMMC */
+	emmc-ldo {
+		emmc_ldo_en_default_mode: emmc_ldo_default {
+			/* LDO enable on GPIO6 */
+			gavini_cfg1 {
+				pins = "GPIO6_AF6";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the touchscreen */
+	tsp-ldo {
+		tsp_ldo_en_default_mode: tsp_ldo_default {
+			/* LDO enable on GPIO94 */
+			gavini_cfg1 {
+				pins = "GPIO94_D7";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* Reset line for the Yamaha YAS530 magnetometer */
+	yas530 {
+		yas530_default: yas530_janice {
+			janice_cfg1 {
+				pins = "GPIO204_AF23";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* Flash and torch */
+	flash {
+		gpio_flash_default_mode: flash_default {
+			janice_cfg1 {
+				pins = "GPIO140_B11", "GPIO141_C12";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the key LED */
+	gpio-leds {
+		gpio_leds_default_mode: gpio_leds_default {
+			/* EN_LED_LDO on GPIO68 */
+			gavini_cfg1 {
+				pins = "GPIO68_E1";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	backlight {
+		ktd259_backlight_default_mode: backlight_default {
+			skomer_cfg1 {
+				pins = "GPIO20_AB4"; /* LCD_BL_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the touchkeys */
+	touchkey-ldo {
+		tsp_ldo_on2_default_mode: tsp_ldo_on2_default {
+			/* TSP_LDO_ON2 on GPIO89 */
+			gavini_cfg1 {
+				pins = "GPIO89_E6";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	touchkey {
+		touchkey_default_mode: touchkey_default {
+			gavini_cfg1 {
+				/* Interrupt */
+				pins = "GPIO198_AG25";
+				ste,config = <&gpio_in_nopull>;
+			};
+			gavini_cfg2 {
+				/* Reset, actually completely unused (not routed) */
+				pins = "GPIO205_AG23";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the LCD display */
+	lcd-ldo {
+		lcd_pwr_en_default_mode: lcd_pwr_en_default {
+			/* LCD_PWR_EN on GPIO219 */
+			gavini_cfg1 {
+				pins = "GPIO219_AG10";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the WLAN internal LDO regulators */
+	wlan-ldo {
+		wlan_ldo_en_default: wlan_ldo_default {
+			/* GPIO215 named WLAN_RST_N */
+			gavini_cfg1 {
+				pins = "GPIO215_AH13";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO that enables the 2.9V SD card level translator */
+	sd-level-translator {
+		sd_level_translator_default: sd_level_translator_default {
+			/* level shifter on GPIO193 */
+			skomer_cfg1 {
+				pins = "GPIO193_AH27";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO keys */
+	gpio-keys {
+		gpio_keys_default_mode: gpio_keys_default {
+			skomer_cfg1 {
+				pins = "GPIO32_V2", /* Projector On HotKey */
+				       "GPIO67_G2", /* VOL UP */
+				       "GPIO91_B6", /* HOME */
+				       "GPIO92_D6"; /* VOL DOWN */
+				ste,config = <&gpio_in_pu>;
+			};
+		};
+	};
+	/* Interrupt line for the Atmel MXT228 touchscreen */
+	tsp {
+		tsp_default: tsp_default {
+			gavini_cfg1 {
+				pins = "GPIO218_AH11";	/* TSP_INT_1V8 */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* Interrupt line for Invensense MPU3050 gyroscope */
+	mpu3050 {
+		mpu3050_default: mpu3050 {
+			gavini_cfg1 {
+				/* GPIO226 used for IRQ */
+				pins = "GPIO226_AF8";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for magnetometer and NCP6914 */
+	i2c-gpio-0 {
+		i2c_gpio_0_default: i2c_gpio_0 {
+			gavini_cfg1 {
+				pins = "GPIO143_D12", "GPIO144_B13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for the Immersion ISA1200 */
+	i2c-gpio-2 {
+		i2c_gpio_2_default: i2c_gpio_2 {
+			gavini_cfg1 {
+				pins = "GPIO201_AF24", "GPIO202_AF25";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for the TI DPP2601 */
+	i2c-gpio-3 {
+		i2c_gpio_3_default: i2c_gpio_3 {
+			gavini_cfg1 {
+				pins = "GPIO196_AG26", "GPIO197_AH24";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based SPI bus for the display */
+	spi-gpio-0 {
+		spi_gpio_0_default: spi_gpio_0_d {
+			gavini_cfg1 {
+				pins = "GPIO220_AH10", "GPIO223_AH9", "GPIO224_AG9";
+				ste,config = <&gpio_out_hi>;
+			};
+			gavini_cfg2 {
+				pins = "GPIO225_AG8";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+		spi_gpio_0_sleep: spi_gpio_0_s {
+			gavini_cfg1 {
+				pins = "GPIO220_AH10", "GPIO223_AH9",
+				     "GPIO224_AG9", "GPIO225_AG8";
+				ste,config = <&gpio_out_hi>;
+			};
+			gavini_cfg2 {
+				pins = "GPIO225_AG8";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	wlan {
+		wlan_default_mode: wlan_default {
+			/* GPIO216 for WL_HOST_WAKE */
+			gavini_cfg2 {
+				pins = "GPIO216_AG12";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	bluetooth {
+		bluetooth_default_mode: bluetooth_default {
+			/* GPIO199 BT_WAKE and GPIO222 BT_VREG_ON */
+			gavini_cfg1 {
+				pins = "GPIO199_AH23", "GPIO222_AJ9";
+				ste,config = <&gpio_out_lo>;
+			};
+			/* GPIO97 BT_HOST_WAKE */
+			gavini_cfg2 {
+				pins = "GPIO97_D9";
+				ste,config = <&gpio_in_nopull>;
+			};
+			/* GPIO209 BT_RST_N */
+			gavini_cfg3 {
+				pins = "GPIO209_AG15";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* Interrupt line for TI TSU6111 Micro USB switch */
+	tsu6111 {
+		tsu6111_default: tsu6111 {
+			gavini_cfg1 {
+				/* GPIO95 used for IRQ */
+				pins = "GPIO95_E8";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index 0d43ee6583cf..9604695edf53 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -25,6 +25,36 @@
 		stdout-path = &serial2;
 	};
 
+	battery: battery {
+		compatible = "samsung,eb-l1m7flu";
+	};
+
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpio2 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
@@ -121,7 +151,7 @@
 			#size-cells = <0>;
 
 			wifi@1 {
-				compatible = "brcm,bcm4329-fmac";
+				compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
 				reg = <1>;
 
 				/* GPIO216 (WLAN_HOST_WAKE) */
@@ -145,6 +175,8 @@
 			non-removable;
 			cap-mmc-highspeed;
 			mmc-ddr-1_8v;
+			no-sdio;
+			no-sd;
 
 			vmmc-supply = <&vmem_3v3>;
 
@@ -162,6 +194,7 @@
 			pinctrl-1 = <&u0_a_1_sleep>;
 
 			bluetooth {
+				/* BCM4334B0 actually */
 				compatible = "brcm,bcm4330-bt";
 				/* GPIO222 (BT_VREG_ON) */
 				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
@@ -273,13 +306,17 @@
 
 		prcmu@80157000 {
 			ab8505 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8505-regulators {
+				ab8500_fg {
+					line-impedance-micro-ohms = <36000>;
+				};
+
+				regulator {
 					ab8500_ldo_aux1 {
 						regulator-name = "sensor_3v";
 						regulator-min-microvolt = <3000000>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index 7411bfeda285..e901cb76b899 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -20,6 +20,36 @@
 		stdout-path = &serial2;
 	};
 
+	battery: battery {
+		compatible = "samsung,eb535151vu";
+	};
+
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* External LDO for eMMC LDO VMEM_3V3 controlled by GPIO6 */
 	ldo_3v3_reg: regulator-gpio-ldo-3v3 {
 		compatible = "regulator-fixed";
@@ -135,21 +165,22 @@
 
 	/*
 	 * This regulator is a GPIO line that drives the Broadcom WLAN
-	 * line BT_VREG_EN high and enables the internal regulators
-	 * inside the chip.
+	 * line WL_REG_ON high and enables the internal regulators
+	 * inside the chip. Unfortunatley it is erroneously named
+	 * WLAN_RST_N on the schematic but it is not a reset line.
 	 *
 	 * The voltage specified here is only used to determine the OCR mask,
 	 * the for the SDIO connector, the chip is actually connected
 	 * directly to VBAT.
 	 */
-	wl_bt_reg: regulator-gpio-wlan {
+	wl_reg: regulator-gpio-wlan {
 		compatible = "regulator-fixed";
-		regulator-name = "BT_VREG_EN";
+		regulator-name = "WL_REG_ON";
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
 		startup-delay-us = <100000>;
-		/* GPIO222 (BT_VREG_EN) */
-		gpio = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+		/* GPIO215 (WLAN_RST_N to WL_REG_ON) */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		pinctrl-names = "default";
 		pinctrl-0 = <&wlan_ldo_en_default>;
@@ -240,7 +271,7 @@
 	 * this derivative is 3wire support, so it cannot be used to drive
 	 * this panel interface. We have to use GPIO bit-banging instead.
 	 */
-	spi-gpio-0 {
+	spi {
 		compatible = "spi-gpio";
 		/* Clock on GPIO220 */
 		sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
@@ -265,6 +296,9 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&panel_default_mode>;
 			spi-3wire;
+			/* TYPE 3: inverse clock polarity and phase */
+			spi-cpha;
+			spi-cpol;
 
 			port {
 				panel_in: endpoint {
@@ -339,9 +373,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		nfc@30 {
-			compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
-			reg = <0x30>;
+		/* This is only mounted on the GT-I9070P */
+		nfc@2b { /* 0x30? */
+			/* NXP NFC circuit PN544 C1 marked NXP 44501  */
+			compatible = "nxp,pn544-i2c";
+			/* IF0, IF1 high, gives I2C address 0x2B */
+			reg = <0x2b>;
+			clock-frequency = <400000>;
 			/* NFC IRQ on GPIO32 */
 			interrupt-parent = <&gpio1>;
 			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
@@ -350,7 +388,7 @@
 			/* GPIO88 */
 			enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&pn547_janice_default>;
+			pinctrl-0 = <&pn544_janice_default>;
 		};
 	};
 
@@ -390,27 +428,22 @@
 			pinctrl-1 = <&mc1_a_2_sleep>;
 			/*
 			 * GPIO-controlled voltage enablement: this drives
-			 * the BT_VREG_EN line high when we use this device.
-			 * Represented as regulator to fill OCR mask and to
-			 * be usable in parallel with the Bluetooth chip.
+			 * the WL_REG_ON line high when we use this device.
+			 * Represented as regulator to fill OCR mask.
 			 */
-			vmmc-supply = <&wl_bt_reg>;
+			vmmc-supply = <&wl_reg>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "okay";
 
 			wifi@1 {
-				/* Actually BRCM4330 */
-				compatible = "brcm,bcm4329-fmac";
+				compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
 				reg = <1>;
 				/* GPIO216 WL_HOST_WAKE */
 				interrupt-parent = <&gpio6>;
 				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
 				interrupt-names = "host-wake";
-				/* GPIO215  WLAN_RST_N */
-				/* FIXME: kernel does not use this assert/deassert */
-				reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&wlan_default_mode>;
 			};
@@ -424,6 +457,8 @@
 			non-removable;
 			cap-mmc-highspeed;
 			mmc-ddr-1_8v;
+			no-sdio;
+			no-sd;
 			vmmc-supply = <&ldo_3v3_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc2_a_1_default>;
@@ -439,16 +474,10 @@
 			status = "okay";
 
 			bluetooth {
+				/* BCM4330B1 actually */
 				compatible = "brcm,bcm4330-bt";
-				/*
-				 * We actually have shutdown-gpios, BT_VREG_EN on GPIO222,
-				 * but since this GPIO is shared with the WLAN chip, we need
-				 * to reference the regulator instead. The regulator
-				 * framework will reference count the GPIO usage and
-				 * make sure we can use the same GPIO for several supplies.
-				 */
-				// shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
-				vbat-supply = <&wl_bt_reg>;
+				/* GPIO222 rail BT_VREG_EN to BT_REG_ON */
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
 				/* BT_WAKE on GPIO199 */
 				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 				/* BT_HOST_WAKE on GPIO97 */
@@ -468,7 +497,26 @@
 			/* CTS/RTS is not used, CTS is repurposed as GPIO */
 			pinctrl-0 = <&u1rxtx_a_1_default>;
 			pinctrl-1 = <&u1rxtx_a_1_sleep>;
-			/* FIXME: add a device for the GPS here */
+
+			gnss {
+				/*
+				 * The Low Noise Amplifier (LNA) power and enablement is controlled
+				 * autonomously by the GSD4t.
+				 * Janice has a SiRFstarIV-based GSD4t
+				 * Golden has a SiRFstarV 5t-based CSRG05TA03-ICJE-R.
+				 */
+				compatible = "csr,gsd4t";
+				/* GPS_RSTN on GPIO21 */
+				reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+				/* GPS_ON_OFF on GPIO96 */
+				sirf,onoff-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+				/* GPS_1V8 (VSMPS2) */
+				vcc-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsd4t_janice_default>;
+				/* According to /etc/sirfgps.conf */
+				current-speed = <460800>;
+			};
 		};
 
 		/* Debugging console UART connected to TSU6111RSVR (FSA880) */
@@ -481,13 +529,17 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8500-regulators {
+				ab8500_fg {
+					line-impedance-micro-ohms = <15000>;
+				};
+
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "V-SENSORS-VDD";
@@ -590,12 +642,11 @@
 					#size-cells = <0>;
 
 					/* Bosch BMA222 accelerometer */
-					accelerometer@08 {
+					accelerometer@8 {
 						compatible = "bosch,bma222";
 						reg = <0x08>;
-						/* FIXME: no idea about this */
-						mount-matrix = "1", "0", "0",
-							       "0", "1", "0",
+						mount-matrix = "0", "-1", "0",
+							       "1", "0", "0",
 							       "0", "0", "1";
 						vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
 						vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
@@ -759,9 +810,9 @@
 	/* GPIO that enables the WLAN internal LDO regulators */
 	wlan-ldo {
 		wlan_ldo_en_default: wlan_ldo_default {
-			/* GPIO222 BT_VREG_ON */
+			/* GPIO215 named WLAN_RST_N */
 			janice_cfg1 {
-				pins = "GPIO222_AJ9";
+				pins = "GPIO215_AH13";
 				ste,config = <&gpio_out_lo>;
 			};
 		};
@@ -875,11 +926,6 @@
 	};
 	wlan {
 		wlan_default_mode: wlan_default {
-			/* GPIO215 used for RESET_N */
-			janice_cfg1 {
-				pins = "GPIO215_AH13";
-				ste,config = <&gpio_out_lo>;
-			};
 			/* GPIO216 for WL_HOST_WAKE */
 			janice_cfg2 {
 				pins = "GPIO216_AG12";
@@ -889,14 +935,17 @@
 	};
 	bluetooth {
 		bluetooth_default_mode: bluetooth_default {
+			/* GPIO199 BT_WAKE and GPIO222 BT_VREG_ON */
 			janice_cfg1 {
-				pins = "GPIO199_AH23";
+				pins = "GPIO199_AH23", "GPIO222_AJ9";
 				ste,config = <&gpio_out_lo>;
 			};
+			/* GPIO97 BT_HOST_WAKE */
 			janice_cfg2 {
 				pins = "GPIO97_D9";
 				ste,config = <&gpio_in_nopull>;
 			};
+			/* GPIO209 BT_RST_N */
 			janice_cfg3 {
 				pins = "GPIO209_AG15";
 				ste,config = <&gpio_out_hi>;
@@ -914,7 +963,7 @@
 		};
 	};
 	nfc {
-		pn547_janice_default: pn547_janice {
+		pn544_janice_default: pn544_janice {
 			/* Interrupt line */
 			janice_cfg1 {
 				pins = "GPIO32_V2";
@@ -927,4 +976,23 @@
 			};
 		};
 	};
+	gsd4t {
+		gsd4t_janice_default: gsd4t_janice {
+			/* Reset line, start out asserted */
+			janice_cfg1 {
+				pins = "GPIO21_AB3";
+				ste,config = <&gpio_out_lo>;
+			};
+			/* GPS_ON_OFF, start out deasserted (off) */
+			janice_cfg2 {
+				pins = "GPIO96_D8";
+				ste,config = <&gpio_out_lo>;
+			};
+			/* Unused power enablement line, used in R0.0 and R0.1 boards */
+			janice_cfg3 {
+				pins = "GPIO86_C6";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
new file mode 100644
index 000000000000..45fab5283a9d
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
@@ -0,0 +1,727 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung Galaxy Amp SGH-I407 also known as Kyle.
+ *
+ * The code also refers to "Kyle AT&T" reflecting that this mobile phone
+ * was customized for the AT&T subsidiary Aio Wireless (All In One) and
+ * offered by the company in 2013.
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8505.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy Amp (SGH-I407)";
+	compatible = "samsung,kyle", "st-ericsson,u8500";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	battery: battery {
+		compatible = "samsung,eb425161la";
+	};
+
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	/* TI TXS0206 level translator for 2.9 V */
+	sd_level_translator: regulator-gpio {
+		compatible = "regulator-fixed";
+
+		/* GPIO87 EN */
+		gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-name = "sd-level-translator";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+
+		startup-delay-us = <200>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_level_translator_default>;
+	};
+
+	/* External LDO MIC5366-3.3YMT for eMMC */
+	ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "en-3v3-fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_ldo_en_default_mode>;
+	};
+
+	/*
+	 * External Ricoh RP152L010B-TR LCD LDO regulator for the display.
+	 * LCD_PWR_EN controls both a 3.0V and 1.8V output.
+	 */
+	lcd_3v0_reg: regulator-gpio-lcd-3v0 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_LCD_3V0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		/* GPIO219 controls this regulator */
+		gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pwr_en_default_mode>;
+	};
+	lcd_1v8_reg: regulator-gpio-lcd-1v8 {
+		compatible = "regulator-fixed";
+		/* Supplied in turn by VBAT */
+		regulator-name = "VREG_LCD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		/* GPIO219 controls this regulator too */
+		gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pwr_en_default_mode>;
+	};
+
+	wlan_en: regulator-gpio-wlan-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wl-reg-on";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		startup-delay-us = <200000>;
+		/* GPIO215 WLAN_EN */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_default_mode>;
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_default>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default_mode>;
+
+		button-home {
+			linux,code = <KEY_HOME>;
+			label = "HOME";
+			/* GPIO91 */
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		};
+		button-volup {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "VOL+";
+			/* GPIO67 */
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+		button-voldown {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "VOL-";
+			/* GPIO92 */
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	ktd253: backlight {
+		compatible = "kinetic,ktd253";
+		/* GPIO 69 */
+		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		/* Default to 13/32 brightness */
+		default-brightness = <13>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_backlight_default_mode>;
+	};
+
+	/* Richtek RT8515GQW Flash LED Driver IC */
+	flash {
+		compatible = "richtek,rt8515";
+		/* GPIO 140 */
+		enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		/* GPIO 141 */
+		ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+		/*
+		 * RFS is 16 kOhm and RTS is 100 kOhm giving
+		 * the flash max current 343mA and torch max
+		 * current 55 mA.
+		 */
+		richtek,rfs-ohms = <16000>;
+		richtek,rts-ohms = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_flash_default_mode>;
+
+		led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+			flash-max-microamp = <343750>;
+			led-max-microamp = <55000>;
+		};
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* TODO: this should be used by the NCP6914 Camera power management unit */
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_1_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		magnetometer@c {
+			compatible = "alps,hscdtd008a";
+			reg = <0x0c>;
+			avdd-supply = <&ab8500_ldo_aux1_reg>;
+			dvdd-supply = <&ab8500_ldo_aux6_reg>;
+		};
+	};
+
+	soc {
+		// External Micro SD slot
+		mmc@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&sd_level_translator>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_1_default>;
+			pinctrl-1 = <&mc0_a_1_sleep>;
+			cd-gpios  = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		mmc@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			non-removable;
+			cap-sd-highspeed;
+			vmmc-supply = <&wlan_en>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_2_default>;
+			pinctrl-1 = <&mc1_a_2_sleep>;
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wifi@1 {
+				compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
+				reg = <1>;
+				/* GPIO216 WL_HOST_WAKE */
+				interrupt-parent = <&gpio6>;
+				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-names = "host-wake";
+				pinctrl-names = "default";
+				pinctrl-0 = <&wlan_default_mode>;
+			};
+		};
+
+		/*
+		 * eMMC seems to be mostly Samsung KLM4G1YE4C "4YMD1R"
+		 */
+		mmc@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <100000000>;
+			bus-width = <8>;
+			non-removable;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+			no-sdio;
+			no-sd;
+			/* From datasheet page 26 figure 9: 300 ms set-up time for 4GB */
+			post-power-on-delay-ms = <300>;
+			vmmc-supply = <&ldo_3v3_reg>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+
+			status = "okay";
+		};
+
+		/* GBF (Bluetooth) UART */
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+			status = "okay";
+
+			bluetooth {
+				/* BCM4334B0 actually */
+				compatible = "brcm,bcm4330-bt";
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bluetooth_default_mode>;
+			};
+		};
+
+		/* GPF UART */
+		uart@80121000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+
+			gnss {
+				/* The CSRG05TA03-ICJE-R is a SirfStarV 5t chip */
+				compatible = "csr,csrg05ta03-icje-r";
+				/* GPS_RSTN on GPIO21 */
+				reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+				/* GPS_ON_OFF on GPIO86 */
+				sirf,onoff-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+				/* GPS_1V8 (VSMPS2) */
+				vcc-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&g05ta03_kyle_default>;
+				/* According to /etc/sirfgps.conf */
+				current-speed = <460800>;
+			};
+		};
+
+		/* Debugging console UART connected to AB8505 USB */
+		uart@80007000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+		};
+
+		prcmu@80157000 {
+			ab8505 {
+				phy {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8500_fg {
+					line-impedance-micro-ohms = <36000>;
+				};
+
+				regulator {
+					ab8500_ldo_aux1 {
+						/* Used for VDD for sensors */
+						regulator-name = "AUX1";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux2 {
+						/* Supplies the MMS touchscreen only with 3.3V */
+						regulator-name = "AUX2";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux3 {
+						/* Used for voltage for external MMC/SD card */
+						regulator-name = "AUX3";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux4 {
+						regulator-name = "AUX4";
+						/* Hammer to 3.3V for the touchscreen */
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux5 {
+						regulator-name = "AUX5";
+						/* 1.8V for the touchscreen */
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ab8500_ldo_aux6 {
+						regulator-name = "AUX6";
+						/* Used by sensors for 1.8 V in R0.1+ */
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ab8500_ldo_aux8 {
+						/* Unused */
+						regulator-name = "AUX8";
+					};
+				};
+			};
+		};
+
+		/* I2C0 */
+		i2c@80004000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+
+			proximity@44 {
+				compatible = "sharp,gp2ap002s00f";
+				clock-frequency = <400000>;
+				reg = <0x44>;
+
+				interrupt-parent = <&gpio4>;
+				interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vio-supply = <&ab8500_ldo_aux6_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gp2ap002_kyle_default>;
+				sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>;
+				sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>;
+			};
+		};
+
+		/* I2C2 */
+		i2c@80128000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+
+			accel@18 {
+				compatible = "bosch,bma254";
+				clock-frequency = <400000>;
+				reg = <0x18>;
+
+				mount-matrix = "-1", "0", "0",
+					       "0", "-1", "0",
+					       "0", "0", "-1";
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&ab8500_ldo_aux6_reg>;
+			};
+		};
+
+		/* I2C3 */
+		i2c@80110000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+
+			/* Melfas MMS134S touchscreen */
+			touchscreen@48 {
+				compatible = "melfas,mms134s";
+				reg = <0x48>;
+				/* GPIO218 for IRQ */
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+				/* AVDD is "analog supply", 2.57-3.47 V */
+				avdd-supply = <&ab8500_ldo_aux2_reg>;
+				/* VDD is "digital supply" 1.71-3.47V */
+				vdd-supply = <&ab8500_ldo_aux5_reg>;
+
+				touchscreen-size-x = <480>;
+				touchscreen-size-y = <800>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&mms134s_kyle_default>;
+			};
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dsi_default_mode>;
+
+			dsi@a0351000 {
+				panel {
+					/*
+					 * NT35510-based Hydis HVA40WV1
+					 * Apparently some Kyle models can have a NT35512 fitted
+					 * here instead. In that case the boot loader needs to
+					 * modify this compatible.
+					 */
+					compatible = "hydis,hva40wv1", "novatek,nt35510";
+					reg = <0>;
+					/* v_lcd_3v0 2.3-4.8V */
+					vdd-supply = <&lcd_3v0_reg>;
+					/* v_lcd_1v8 1.65-3.3V */
+					vddi-supply = <&lcd_1v8_reg>;
+					/* GPIO 139 */
+					reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&display_default_mode>;
+					backlight = <&ktd253>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	/*
+	 * This extends the MC0_A_1 default config to include
+	 * the card detect GPIO217 line.
+	 */
+	sdi0 {
+		mc0_a_1_default {
+			default_cfg1 {
+				/* GPIO18, 19 & 20 unused so pull down */
+				ste,config = <&gpio_in_pd>;
+			};
+			default_cfg4 {
+				pins = "GPIO217_AH12"; /* card detect */
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+
+	mcde {
+		dsi_default_mode: dsi_default {
+			default_mux1 {
+				/* Mux in VSI0 used for DSI TE */
+				function = "lcd";
+				groups = "lcdvsi0_a_1"; /* VSI0 for LCD */
+			};
+			default_cfg1 {
+				pins = "GPIO68_E1"; /* VSI0 */
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+
+	/* Two GPIO lines used by the display */
+	display {
+		display_default_mode: display_default {
+			kyle_cfg1 {
+				/*
+				 * OLED DETECT or check_pba, this appears to be high
+				 * on "PBA" which I guess is "prototype board A".
+				 */
+				pins = "GPIO93_B7";
+				ste,config = <&gpio_in_nopull>;
+			};
+			kyle_cfg2 {
+				pins = "GPIO139_C9";
+				/*
+				 * MIPI_DSI0_RESET_N resets the display, leave high
+				 * (de-asserted) so we only assert reset explicitly
+				 * from the display driver.
+				 */
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+
+	/* GPIO that enables the LDO regulator for the LCD display */
+	lcd-ldo {
+		lcd_pwr_en_default_mode: lcd_pwr_en_default {
+			/* LCD_PWR_EN on GPIO219 */
+			kyle_cfg1 {
+				pins = "GPIO219_AG10";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+
+	backlight {
+		gpio_backlight_default_mode: backlight_default {
+			kyle_cfg1 {
+				pins = "GPIO69_E2"; /* LCD_BL_CTRL */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	flash {
+		gpio_flash_default_mode: flash_default {
+			kyle_cfg1 {
+				pins = "GPIO140_B11", "GPIO141_C12";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO that enables the 2.9V SD card level translator */
+	sd-level-translator {
+		sd_level_translator_default: sd_level_translator_default {
+			/* level shifter on GPIO87 */
+			kyle_cfg1 {
+				pins = "GPIO87_B3";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the eMMC */
+	emmc-ldo {
+		emmc_ldo_en_default_mode: emmc_ldo_default {
+			/* LDO enable on GPIO223 */
+			kyle_cfg1 {
+				pins = "GPIO223_AH9";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO keys */
+	gpio-keys {
+		gpio_keys_default_mode: gpio_keys_default {
+			kyle_cfg1 {
+				pins = "GPIO67_G2", /* VOL UP */
+				       "GPIO91_B6", /* HOME */
+				       "GPIO92_D6"; /* VOL DOWN */
+					ste,config = <&gpio_in_pu>;
+			};
+		};
+	};
+	/* Interrupt line for light/proximity sensor GP2AP002 */
+	gp2ap002 {
+		gp2ap002_kyle_default: gp2ap002_kyle {
+			kyle_cfg1 {
+				pins = "GPIO146_D13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for NCP6914 */
+	i2c-gpio-0 {
+		i2c_gpio_0_default: i2c_gpio_0 {
+			kyle_cfg1 {
+				pins = "GPIO143_D12", "GPIO144_B13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for ALPS HSCD compass */
+	i2c-gpio-1 {
+		i2c_gpio_1_default: i2c_gpio_1 {
+			kyle_cfg1 {
+				pins = "GPIO151_B17", "GPIO152_D16";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	wlan {
+		wlan_default_mode: wlan_default {
+			kyle_cfg1 {
+				pins = "GPIO216_AG12";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+		wlan_en_default_mode: wlan_en_default {
+			kyle_cfg2 {
+				pins = "GPIO215_AH13";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	bluetooth {
+		bluetooth_default_mode: bluetooth_default {
+			kyle_cfg1 {
+				pins = "GPIO199_AH23", "GPIO222_AJ9";
+				ste,config = <&gpio_out_lo>;
+			};
+			kyle_cfg2 {
+				pins = "GPIO97_D9";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	vibrator {
+		vibrator_default: vibrator_default {
+			kyle_cfg1 {
+				pins = "GPIO195_AG28";	/* MOT_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* Interrupt line for the Melfas MMS134S touchscreen */
+	touchscreen {
+		mms134s_kyle_default: mms134s_kyle {
+			kyle_cfg1 {
+				pins = "GPIO218_AH11";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	g05ta03 {
+		g05ta03_kyle_default: g05ta03 {
+			/* Reset line, start out de-asserted */
+			kyle_cfg1 {
+				pins = "GPIO21_AB3";
+				ste,config = <&gpio_out_hi>;
+			};
+			/* GPS_ON_OFF, start out deasserted (off) */
+			kyle_cfg2 {
+				pins = "GPIO86_C6";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+};
+
+&ab8505_gpio {
+	/* Hog a few default settings */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_default>;
+
+	gpio {
+		gpio_default: gpio_default {
+			kyle_mux {
+				/* Change unused pins to GPIO mode */
+				function = "gpio";
+				groups = "gpio3_a_1",	/* default: SysClkReq4 */
+					 "gpio14_a_1";	/* default: PWMOut1 */
+			};
+			kyle_cfg1 {
+				pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4";
+				bias-disable;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index d28a00757d0b..93e5f5ed888d 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -20,6 +20,36 @@
 		stdout-path = &serial2;
 	};
 
+	battery: battery {
+		compatible = "samsung,eb485159lu";
+	};
+
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* TI TXS0206 level translator for 2.9 V */
 	sd_level_translator: regulator-gpio {
 		compatible = "regulator-fixed";
@@ -181,10 +211,6 @@
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			/* All direction control is used */
-			st,sig-dir-cmd;
-			st,sig-dir-dat0;
-			st,sig-dir-dat2;
-			st,sig-dir-dat31;
 			st,sig-pin-fbclk;
 			full-pwr-cycle;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
@@ -211,7 +237,7 @@
 			#size-cells = <0>;
 
 			wifi@1 {
-				compatible = "brcm,bcm4329-fmac";
+				compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
 				reg = <1>;
 				/* GPIO216 WL_HOST_WAKE */
 				interrupt-parent = <&gpio6>;
@@ -222,7 +248,9 @@
 			};
 		};
 
-		// eMMC
+		/*
+		 * eMMC seems to be mostly Samsung KLM4G1YE4C "4YMD1R"
+		 */
 		mmc@80005000 {
 			arm,primecell-periphid = <0x10480180>;
 		        max-frequency = <100000000>;
@@ -230,6 +258,10 @@
 			non-removable;
 			cap-mmc-highspeed;
 			mmc-ddr-1_8v;
+			no-sdio;
+			no-sd;
+			/* From datasheet page 26 figure 9: 300 ms set-up time for 4GB */
+			post-power-on-delay-ms = <300>;
 			vmmc-supply = <&ldo_3v3_reg>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&mc2_a_1_default>;
@@ -247,6 +279,7 @@
 
 			/* FIXME: not quite working yet, probably needs regulators */
 			bluetooth {
+				/* BCM4334B0 actually */
 				compatible = "brcm,bcm4330-bt";
 				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
 				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
@@ -256,12 +289,27 @@
 			};
 		};
 
-		/* GPF UART */
+		/* GPS UART */
 		uart@80121000 {
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
 			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+
+			gnss {
+				/* The CSRG05TA03-ICJE-R is a SirfStarV 5t chip */
+				compatible = "csr,csrg05ta03-icje-r";
+				/* GPS_RSTN on GPIO209 */
+				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
+				/* GPS_ON_OFF on GPIO86 */
+				sirf,onoff-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+				/* GPS_1V8 (VSMPS2) */
+				vcc-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&g05ta03_skomer_default>;
+				/* According to /etc/sirfgps.conf */
+				current-speed = <460800>;
+			};
 		};
 
 		/* Debugging console UART connected to AB8505 USB */
@@ -274,13 +322,17 @@
 
 		prcmu@80157000 {
 			ab8505 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8505-regulators {
+				ab8500_fg {
+					line-impedance-micro-ohms = <16000>;
+				};
+
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "AUX1";
@@ -289,10 +341,10 @@
 					};
 
 					ab8500_ldo_aux2 {
-						/* Supplies the Cypress TMA140 touchscreen only with 3.3V */
+						/* Supplies the Cypress TMA140 touchscreen only with 3.0V */
 						regulator-name = "AUX2";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
 					};
 
 					ab8500_ldo_aux3 {
@@ -311,9 +363,9 @@
 
 					ab8500_ldo_aux5 {
 						regulator-name = "AUX5";
+						/* Intended for 1V8 for touchscreen but actually left unused */
 						regulator-min-microvolt = <1050000>;
 						regulator-max-microvolt = <2790000>;
-						regulator-always-on;
 					};
 
 					ab8500_ldo_aux6 {
@@ -441,31 +493,21 @@
 };
 
 &pinctrl {
-	/*
-	 * This extends the MC0 default config to include DAT32DIR
-	 * which is used by this machine. If we don't do this the
-	 * SD card does not work.
-	 */
 	sdi0 {
 		mc0_a_1_default {
-			default_mux {
-				function = "mc0";
-				/* This machine uses the DAT31 pin */
-				groups = "mc0_a_1", "mc0dat31dir_a_1";
-			};
-			default_cfg5 {
-				pins = "GPIO21_AB3"; /* DAT31DIR */
-				ste,config = <&out_hi>;
+			default_cfg1 {
+				/* GPIO18, 19 & 20 unused so pull down */
+				ste,config = <&gpio_in_pd>;
 			};
 		};
 	};
 
-	/* The unused FBCLK needs to be pulled down on this machine */
+	/* This is a reset line for the eMMC */
 	sdi2 {
 		mc2_a_1_default {
 			default_cfg2 {
 				pins = "GPIO130_C8"; /* FBCLK */
-				ste,config = <&in_pd>;
+				ste,config = <&gpio_in_pd>;
 			};
 		};
 	};
@@ -634,6 +676,20 @@
 			};
 		};
 	};
+	g05ta03 {
+		g05ta03_skomer_default: g05ta03 {
+			/* Reset line, start out de-asserted */
+			skomer_cfg1 {
+				pins = "GPIO209_AG15";
+				ste,config = <&gpio_out_hi>;
+			};
+			/* GPS_ON_OFF, start out deasserted (off) */
+			skomer_cfg2 {
+				pins = "GPIO86_C6";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
 };
 
 &ab8505_gpio {
diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts
index 31c85f945c6b..9c79982ee7ba 100644
--- a/arch/arm/boot/dts/stih407-b2120.dts
+++ b/arch/arm/boot/dts/stih407-b2120.dts
@@ -11,7 +11,6 @@
 	compatible = "st,stih407-b2120", "st,stih407";
 
 	chosen {
-		bootargs = "clk_ignore_unused";
 		stdout-path = &sbc_serial0;
 	};
 
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 1ab40db7c91a..350bcfcf498b 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -29,42 +29,35 @@
 		 */
 		clockgen-a9@92b0000 {
 			compatible = "st,clkgen-c32";
-			reg = <0x92b0000 0xffff>;
+			reg = <0x92b0000 0x10000>;
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
 				compatible = "st,stih407-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clockgen-a9-pll-odf";
 			};
-		};
-
-		/*
-		 * ARM CPU related clocks.
-		 */
-		clk_m_a9: clk-m-a9@92b0000 {
-			#clock-cells = <0>;
-			compatible = "st,stih407-clkgen-a9-mux";
-			reg = <0x92b0000 0x10000>;
 
-			clocks = <&clockgen_a9_pll 0>,
-				 <&clockgen_a9_pll 0>,
-				 <&clk_s_c0_flexgen 13>,
-				 <&clk_m_a9_ext2f_div2>;
+			clk_m_a9: clk-m-a9 {
+				#clock-cells = <0>;
+				compatible = "st,stih407-clkgen-a9-mux";
 
+				clocks = <&clockgen_a9_pll 0>,
+					 <&clockgen_a9_pll 0>,
+					 <&clk_s_c0_flexgen 13>,
+					 <&clk_m_a9_ext2f_div2>;
 
-			/*
-			 * ARM Peripheral clock for timers
-			 */
-			arm_periph_clk: clk-m-a9-periphs {
-				#clock-cells = <0>;
-				compatible = "fixed-factor-clock";
+				/*
+				 * ARM Peripheral clock for timers
+				 */
+				arm_periph_clk: clk-m-a9-periphs {
+					#clock-cells = <0>;
+					compatible = "fixed-factor-clock";
 
-				clocks = <&clk_m_a9>;
-				clock-div = <2>;
-				clock-mult = <1>;
+					clocks = <&clk_m_a9>;
+					clock-div = <2>;
+					clock-mult = <1>;
+				};
 			};
 		};
 
@@ -74,67 +67,49 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-a0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll-ofd-0";
-				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-a0";
 
 				#clock-cells = <1>;
 
 				clocks = <&clk_s_a0_pll 0>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-ic-lmi0";
-				clock-critical = <CLK_IC_LMI0>;
 			};
 		};
 
-		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-pll";
-			reg = <0x9103000 0x1000>;
-
-			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-c0-fs0-ch0",
-					     "clk-s-c0-fs0-ch1",
-					     "clk-s-c0-fs0-ch2",
-					     "clk-s-c0-fs0-ch3";
-			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
-		};
-
 		clk_s_c0: clockgen-c@9103000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9103000 0x1000>;
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll0-odf-0";
-				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
 			};
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll1";
+				compatible = "st,clkgen-pll1-c0";
 
 				clocks = <&clk_sysin>;
+			};
+
+			clk_s_c0_quadfs: clk-s-c0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-pll";
 
-				clock-output-names = "clk-s-c0-pll1-odf-0";
+				clocks = <&clk_sysin>;
 			};
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-c0";
 
 				clocks = <&clk_s_c0_pll0 0>,
 					 <&clk_s_c0_pll1 0>,
@@ -144,45 +119,6 @@
 					 <&clk_s_c0_quadfs 3>,
 					 <&clk_sysin>;
 
-				clock-output-names = "clk-icn-gpu",
-						     "clk-fdma",
-						     "clk-nand",
-						     "clk-hva",
-						     "clk-proc-stfe",
-						     "clk-proc-tp",
-						     "clk-rx-icn-dmu",
-						     "clk-rx-icn-hva",
-						     "clk-icn-cpu",
-						     "clk-tx-icn-dmu",
-						     "clk-mmc-0",
-						     "clk-mmc-1",
-						     "clk-jpegdec",
-						     "clk-ext2fa9",
-						     "clk-ic-bdisp-0",
-						     "clk-ic-bdisp-1",
-						     "clk-pp-dmu",
-						     "clk-vid-dmu",
-						     "clk-dss-lpc",
-						     "clk-st231-aud-0",
-						     "clk-st231-gp-1",
-						     "clk-st231-dmu",
-						     "clk-icn-lmi",
-						     "clk-tx-icn-disp-1",
-						     "clk-icn-sbc",
-						     "clk-stfe-frc2",
-						     "clk-eth-phy",
-						     "clk-eth-ref-phyclk",
-						     "clk-flash-promip",
-						     "clk-main-disp",
-						     "clk-aux-disp",
-						     "clk-compo-dvp";
-				clock-critical = <CLK_PROC_STFE>,
-						 <CLK_ICN_CPU>,
-						 <CLK_TX_ICN_DMU>,
-						 <CLK_EXT2F_A9>,
-						 <CLK_ICN_LMI>,
-						 <CLK_ICN_SBC>;
-
 				/*
 				 * ARM Peripheral clock for timers
 				 */
@@ -200,60 +136,43 @@
 			};
 		};
 
-		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs";
-			reg = <0x9104000 0x1000>;
-
-			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d0-fs0-ch0",
-					     "clk-s-d0-fs0-ch1",
-					     "clk-s-d0-fs0-ch2",
-					     "clk-s-d0-fs0-ch3";
-		};
-
 		clockgen-d0@9104000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9104000 0x1000>;
 
+			clk_s_d0_quadfs: clk-s-d0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d0";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-audio", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d0";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
 					 <&clk_s_d0_quadfs 2>,
 					 <&clk_s_d0_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-pcm-0",
-						     "clk-pcm-1",
-						     "clk-pcm-2",
-						     "clk-spdiff";
 			};
 		};
 
-		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs";
-			reg = <0x9106000 0x1000>;
-
-			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d2-fs0-ch0",
-					     "clk-s-d2-fs0-ch1",
-					     "clk-s-d2-fs0-ch2",
-					     "clk-s-d2-fs0-ch3";
-		};
-
 		clockgen-d2@9106000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9106000 0x1000>;
 
+			clk_s_d2_quadfs: clk-s-d2-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d2";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-video", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d2";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -262,61 +181,29 @@
 					 <&clk_sysin>,
 					 <&clk_sysin>,
 					 <&clk_tmdsout_hdmi>;
-
-				clock-output-names = "clk-pix-main-disp",
-						     "clk-pix-pip",
-						     "clk-pix-gdp1",
-						     "clk-pix-gdp2",
-						     "clk-pix-gdp3",
-						     "clk-pix-gdp4",
-						     "clk-pix-aux-disp",
-						     "clk-denc",
-						     "clk-pix-hddac",
-						     "clk-hddac",
-						     "clk-sddac",
-						     "clk-pix-dvo",
-						     "clk-dvo",
-						     "clk-pix-hdmi",
-						     "clk-tmds-hdmi",
-						     "clk-ref-hdmiphy";
-						     };
-		};
-
-		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs";
-			reg = <0x9107000 0x1000>;
-
-			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d3-fs0-ch0",
-					     "clk-s-d3-fs0-ch1",
-					     "clk-s-d3-fs0-ch2",
-					     "clk-s-d3-fs0-ch3";
+			};
 		};
 
 		clockgen-d3@9107000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9107000 0x1000>;
 
+			clk_s_d3_quadfs: clk-s-d3-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d3";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d3";
 
 				clocks = <&clk_s_d3_quadfs 0>,
 					 <&clk_s_d3_quadfs 1>,
 					 <&clk_s_d3_quadfs 2>,
 					 <&clk_s_d3_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-stfe-frc1",
-						     "clk-tsout-0",
-						     "clk-tsout-1",
-						     "clk-mchi",
-						     "clk-vsens-compo",
-						     "clk-frc1-remote",
-						     "clk-lpc-0",
-						     "clk-lpc-1";
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 23a1746f3baa..5ebb77947fd9 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -115,37 +115,140 @@
 		status = "okay";
 	};
 
-	soc {
+	restart: restart-controller {
+		compatible = "st,stih407-restart";
+		st,syscfg = <&syscfg_sbc_reg>;
+		status = "okay";
+	};
+
+	powerdown: powerdown-controller {
+		compatible = "st,stih407-powerdown";
+		#reset-cells = <1>;
+	};
+
+	softreset: softreset-controller {
+		compatible = "st,stih407-softreset";
+		#reset-cells = <1>;
+	};
+
+	picophyreset: picophyreset-controller {
+		compatible = "st,stih407-picophyreset";
+		#reset-cells = <1>;
+	};
+
+	irq-syscfg {
+		compatible = "st,stih407-irq-syscfg";
+		st,syscfg = <&syscfg_core>;
+		st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+				<ST_IRQ_SYSCFG_PMU_1>;
+		st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+				<ST_IRQ_SYSCFG_DISABLED>;
+	};
+
+	usb2_picophy0: phy1 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0x100 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY2_RESET>;
+		reset-names = "global", "port";
+	};
+
+	miphy28lp_phy: miphy28lp {
+		compatible = "st,miphy28lp-phy";
+		st,syscfg = <&syscfg_core>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		interrupt-parent = <&intc>;
 		ranges;
-		compatible = "simple-bus";
 
-		restart: restart-controller@0 {
-			compatible = "st,stih407-restart";
-			reg = <0 0>;
-			st,syscfg = <&syscfg_sbc_reg>;
-			status = "okay";
-		};
+		phy_port0: port@9b22000 {
+			reg = <0x9b22000 0xff>,
+			      <0x9b09000 0xff>,
+			      <0x9b04000 0xff>;
+			reg-names = "sata-up",
+				    "pcie-up",
+				    "pipew";
+
+			st,syscfg = <0x114 0x818 0xe0 0xec>;
+			#phy-cells = <1>;
 
-		powerdown: powerdown-controller@0 {
-			compatible = "st,stih407-powerdown";
-			reg = <0 0>;
-			#reset-cells = <1>;
+			reset-names = "miphy-sw-rst";
+			resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
 		};
 
-		softreset: softreset-controller@0 {
-			compatible = "st,stih407-softreset";
-			reg = <0 0>;
-			#reset-cells = <1>;
+		phy_port1: port@9b2a000 {
+			reg = <0x9b2a000 0xff>,
+			      <0x9b19000 0xff>,
+			      <0x9b14000 0xff>;
+			reg-names = "sata-up",
+				    "pcie-up",
+				    "pipew";
+
+			st,syscfg = <0x118 0x81c 0xe4 0xf0>;
+
+			#phy-cells = <1>;
+
+			reset-names = "miphy-sw-rst";
+			resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
 		};
 
-		picophyreset: picophyreset-controller@0 {
-			compatible = "st,stih407-picophyreset";
-			reg = <0 0>;
-			#reset-cells = <1>;
+		phy_port2: port@8f95000 {
+			reg = <0x8f95000 0xff>,
+			      <0x8f90000 0xff>;
+			reg-names = "pipew",
+				    "usb3-up";
+
+			st,syscfg = <0x11c 0x820>;
+
+			#phy-cells = <1>;
+
+			reset-names = "miphy-sw-rst";
+			resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
 		};
+	};
+
+	st231_gp0: st231-gp0 {
+		compatible = "st,st231-rproc";
+		memory-region = <&gp0_reserved>;
+		resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
+		reset-names = "sw_reset";
+		clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
+		clock-frequency = <600000000>;
+		st,syscfg = <&syscfg_core 0x22c>;
+		#mbox-cells = <1>;
+		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+		mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
+	};
+
+	st231_delta: st231-delta {
+		compatible = "st,st231-rproc";
+		memory-region = <&delta_reserved>;
+		resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
+		reset-names = "sw_reset";
+		clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
+		clock-frequency = <600000000>;
+		st,syscfg = <&syscfg_core 0x224>;
+		#mbox-cells = <1>;
+		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+		mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
+	};
+
+	delta0 {
+		compatible = "st,st-delta";
+		clock-names = "delta",
+			      "delta-st231",
+			      "delta-flash-promip";
+		clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
+			 <&clk_s_c0_flexgen CLK_ST231_DMU>,
+			 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		compatible = "simple-bus";
 
 		syscfg_sbc: sbc-syscfg@9620000 {
 			compatible = "st,stih407-sbc-syscfg", "syscon";
@@ -189,16 +292,6 @@
 			reg = <0x94b5100 0x1000>;
 		};
 
-		irq-syscfg@0 {
-			compatible    = "st,stih407-irq-syscfg";
-			reg = <0 0>;
-			st,syscfg     = <&syscfg_core>;
-			st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
-					<ST_IRQ_SYSCFG_PMU_1>;
-			st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
-					<ST_IRQ_SYSCFG_DISABLED>;
-		};
-
 		/* Display */
 		vtg_main: sti-vtg-main@8d02800 {
 			compatible = "st,vtg";
@@ -389,70 +482,6 @@
 			status = "disabled";
 		};
 
-		usb2_picophy0: phy1@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0x100 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY2_RESET>;
-			reset-names = "global", "port";
-		};
-
-		miphy28lp_phy: miphy28lp@0 {
-			compatible = "st,miphy28lp-phy";
-			st,syscfg = <&syscfg_core>;
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			ranges;
-			reg = <0 0>;
-
-			phy_port0: port@9b22000 {
-				reg = <0x9b22000 0xff>,
-				      <0x9b09000 0xff>,
-				      <0x9b04000 0xff>;
-				reg-names = "sata-up",
-					    "pcie-up",
-					    "pipew";
-
-				st,syscfg = <0x114 0x818 0xe0 0xec>;
-				#phy-cells = <1>;
-
-				reset-names = "miphy-sw-rst";
-				resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
-			};
-
-			phy_port1: port@9b2a000 {
-				reg = <0x9b2a000 0xff>,
-				      <0x9b19000 0xff>,
-				      <0x9b14000 0xff>;
-				reg-names = "sata-up",
-					    "pcie-up",
-					    "pipew";
-
-				st,syscfg = <0x118 0x81c 0xe4 0xf0>;
-
-				#phy-cells = <1>;
-
-				reset-names = "miphy-sw-rst";
-				resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
-			};
-
-			phy_port2: port@8f95000 {
-				reg = <0x8f95000 0xff>,
-				      <0x8f90000 0xff>;
-				reg-names = "pipew",
-					    "usb3-up";
-
-				st,syscfg = <0x11c 0x820>;
-
-				#phy-cells = <1>;
-
-				reset-names = "miphy-sw-rst";
-				resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
-			};
-		};
-
 		spi@9840000 {
 			compatible = "st,comms-ssc4-spi";
 			reg = <0x9840000 0x110>;
@@ -616,6 +645,21 @@
 			st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
 		};
 
+		spifsm: spifsm@9022000{
+			compatible = "st,spi-fsm";
+			reg = <0x9022000 0x1000>;
+			reg-names = "spi-fsm";
+			clocks = <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+			clock-names = "emi_clk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fsm>;
+			st,syscfg = <&syscfg_core>;
+			st,boot-device-reg = <0x8c4>;
+			st,boot-device-spi = <0x68>;
+
+			status = "disabled";
+		};
+
 		sata0: sata@9b20000 {
 			compatible = "st,ahci";
 			reg = <0x9b20000 0x1000>;
@@ -666,78 +710,78 @@
 
 
 		st_dwc3: dwc3@8f94000 {
-			compatible	= "st,stih407-dwc3";
-			reg		= <0x08f94000 0x1000>, <0x110 0x4>;
-			reg-names	= "reg-glue", "syscfg-reg";
-			st,syscfg	= <&syscfg_core>;
-			resets		= <&powerdown STIH407_USB3_POWERDOWN>,
-					  <&softreset STIH407_MIPHY2_SOFTRESET>;
-			reset-names	= "powerdown", "softreset";
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_usb3>;
+			compatible = "st,stih407-dwc3";
+			reg = <0x08f94000 0x1000>, <0x110 0x4>;
+			reg-names = "reg-glue", "syscfg-reg";
+			st,syscfg = <&syscfg_core>;
+			resets = <&powerdown STIH407_USB3_POWERDOWN>,
+				 <&softreset STIH407_MIPHY2_SOFTRESET>;
+			reset-names = "powerdown", "softreset";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb3>;
 			ranges;
 
 			status = "disabled";
 
-			dwc3: dwc3@9900000 {
-				compatible	= "snps,dwc3";
-				reg		= <0x09900000 0x100000>;
-				interrupts	= <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-				dr_mode		= "host";
-				phy-names	= "usb2-phy", "usb3-phy";
-				phys		= <&usb2_picophy0>,
-						  <&phy_port2 PHY_TYPE_USB3>;
+			dwc3: usb@9900000 {
+				compatible = "snps,dwc3";
+				reg = <0x09900000 0x100000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				phy-names = "usb2-phy", "usb3-phy";
+				phys = <&usb2_picophy0>,
+				       <&phy_port2 PHY_TYPE_USB3>;
 				snps,dis_u3_susphy_quirk;
 			};
 		};
 
 		/* COMMS PWM Module */
 		pwm0: pwm@9810000 {
-			compatible	= "st,sti-pwm";
-			#pwm-cells	= <2>;
-			reg		= <0x9810000 0x68>;
-			interrupts      = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
-			clock-names	= "pwm";
-			clocks		= <&clk_sysin>;
+			compatible = "st,sti-pwm";
+			#pwm-cells = <2>;
+			reg = <0x9810000 0x68>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
+			clock-names = "pwm";
+			clocks = <&clk_sysin>;
 			st,pwm-num-chan = <1>;
 
-			status		= "disabled";
+			status = "disabled";
 		};
 
 		/* SBC PWM Module */
 		pwm1: pwm@9510000 {
-			compatible	= "st,sti-pwm";
-			#pwm-cells	= <2>;
-			reg		= <0x9510000 0x68>;
-			interrupts      = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-			pinctrl-names	= "default";
-			pinctrl-0	= <&pinctrl_pwm1_chan0_default
-					&pinctrl_pwm1_chan1_default
-					&pinctrl_pwm1_chan2_default
-					&pinctrl_pwm1_chan3_default>;
-			clock-names	= "pwm";
-			clocks		= <&clk_sysin>;
+			compatible = "st,sti-pwm";
+			#pwm-cells = <2>;
+			reg = <0x9510000 0x68>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pwm1_chan0_default
+				     &pinctrl_pwm1_chan1_default
+				     &pinctrl_pwm1_chan2_default
+				     &pinctrl_pwm1_chan3_default>;
+			clock-names = "pwm";
+			clocks = <&clk_sysin>;
 			st,pwm-num-chan = <4>;
 
-			status		= "disabled";
+			status = "disabled";
 		};
 
 		rng10: rng@8a89000 {
-			compatible      = "st,rng";
-			reg		= <0x08a89000 0x1000>;
-			clocks          = <&clk_sysin>;
-			status		= "okay";
+			compatible = "st,rng";
+			reg = <0x08a89000 0x1000>;
+			clocks = <&clk_sysin>;
+			status = "okay";
 		};
 
 		rng11: rng@8a8a000 {
-			compatible      = "st,rng";
-			reg		= <0x08a8a000 0x1000>;
-			clocks          = <&clk_sysin>;
-			status		= "okay";
+			compatible = "st,rng";
+			reg = <0x08a8a000 0x1000>;
+			clocks = <&clk_sysin>;
+			status = "okay";
 		};
 
 		ethernet0: dwmac@9630000 {
@@ -768,64 +812,36 @@
 		};
 
 		mailbox0: mailbox@8f00000  {
-			compatible	= "st,stih407-mailbox";
-			reg		= <0x8f00000 0x1000>;
-			interrupts	= <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells	= <2>;
-			mbox-name	= "a9";
-			status		= "okay";
+			compatible = "st,stih407-mailbox";
+			reg = <0x8f00000 0x1000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			mbox-name = "a9";
+			status = "okay";
 		};
 
 		mailbox1: mailbox@8f01000 {
-			compatible	= "st,stih407-mailbox";
-			reg		= <0x8f01000 0x1000>;
-			#mbox-cells	= <2>;
-			mbox-name	= "st231_gp_1";
-			status		= "okay";
+			compatible = "st,stih407-mailbox";
+			reg = <0x8f01000 0x1000>;
+			#mbox-cells = <2>;
+			mbox-name = "st231_gp_1";
+			status = "okay";
 		};
 
 		mailbox2: mailbox@8f02000 {
-			compatible	= "st,stih407-mailbox";
-			reg		= <0x8f02000 0x1000>;
-			#mbox-cells	= <2>;
-			mbox-name	= "st231_gp_0";
-			status		= "okay";
+			compatible = "st,stih407-mailbox";
+			reg = <0x8f02000 0x1000>;
+			#mbox-cells = <2>;
+			mbox-name = "st231_gp_0";
+			status = "okay";
 		};
 
 		mailbox3: mailbox@8f03000 {
-			compatible	= "st,stih407-mailbox";
-			reg		= <0x8f03000 0x1000>;
-			#mbox-cells	= <2>;
-			mbox-name	= "st231_audio_video";
-			status		= "okay";
-		};
-
-		st231_gp0: st231-gp0@0 {
-			compatible	= "st,st231-rproc";
-			reg		= <0 0>;
-			memory-region	= <&gp0_reserved>;
-			resets		= <&softreset STIH407_ST231_GP0_SOFTRESET>;
-			reset-names	= "sw_reset";
-			clocks		= <&clk_s_c0_flexgen CLK_ST231_GP_0>;
-			clock-frequency	= <600000000>;
-			st,syscfg	= <&syscfg_core 0x22c>;
-			#mbox-cells = <1>;
-			mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
-			mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
-		};
-
-		st231_delta: st231-delta@0 {
-			compatible	= "st,st231-rproc";
-			reg		= <0 0>;
-			memory-region	= <&delta_reserved>;
-			resets		= <&softreset STIH407_ST231_DMU_SOFTRESET>;
-			reset-names	= "sw_reset";
-			clocks		= <&clk_s_c0_flexgen CLK_ST231_DMU>;
-			clock-frequency	= <600000000>;
-			st,syscfg	= <&syscfg_core 0x224>;
-			#mbox-cells = <1>;
-			mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
-			mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
+			compatible = "st,stih407-mailbox";
+			reg = <0x8f03000 0x1000>;
+			#mbox-cells = <2>;
+			mbox-name = "st231_audio_video";
+			status = "okay";
 		};
 
 		/* fdma audio */
@@ -897,7 +913,7 @@
 			dmas = <&fdma0 2 0 1>;
 			dma-names = "tx";
 
-			status		= "disabled";
+			status = "disabled";
 		};
 
 		sti_uni_player1: sti-uni-player@8d81000 {
@@ -971,16 +987,5 @@
 
 			status = "disabled";
 		};
-
-		delta0@0 {
-			compatible = "st,st-delta";
-			reg = <0 0>;
-			clock-names = "delta",
-				      "delta-st231",
-				      "delta-flash-promip";
-			clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
-				 <&clk_s_c0_flexgen CLK_ST231_DMU>,
-				 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 9e212b0af89d..aca43d2bdaad 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -13,7 +13,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0 0>;
-			assigned-clocks	= <&clk_s_d2_quadfs 0>,
+			assigned-clocks = <&clk_s_d2_quadfs 0>,
 					  <&clk_s_d2_quadfs 1>,
 					  <&clk_s_c0_pll1 0>,
 					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
@@ -106,7 +106,7 @@
 				reg-names = "hdmi-reg";
 				#sound-dai-cells = <0>;
 				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "irq";
+				interrupt-names = "irq";
 				clock-names = "pix",
 					      "tmds",
 					      "phy",
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 158b2268748e..538ff98ca1b1 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -11,7 +11,6 @@
 	compatible = "st,stih410-b2120", "st,stih410";
 
 	chosen {
-		bootargs = "clk_ignore_unused";
 		stdout-path = &sbc_serial0;
 	};
 
@@ -25,6 +24,14 @@
 		ethernet0 = &ethernet0;
 	};
 
+	usb2_picophy1: phy2 {
+		status = "okay";
+	};
+
+	usb2_picophy2: phy3 {
+		status = "okay";
+	};
+
 	soc {
 
 		mmc0: sdhci@9060000 {
@@ -34,14 +41,6 @@
 			sd-uhs-ddr50;
 		};
 
-		usb2_picophy1: phy2@0 {
-			status = "okay";
-		};
-
-		usb2_picophy2: phy3@0 {
-			status = "okay";
-		};
-
 		ohci0: usb@9a03c00 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index e2bb59783146..240b62040000 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -12,7 +12,6 @@
 	compatible = "st,stih410-b2260", "st,stih410";
 
 	chosen {
-		bootargs = "clk_ignore_unused";
 		stdout-path = &uart1;
 	};
 
@@ -28,26 +27,26 @@
 
 	leds {
 		compatible = "gpio-leds";
-		user_green_1 {
+		led-user-green-1 {
 			label = "User_green_1";
 			gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		user_green_2 {
+		led-user-green-2 {
 			label = "User_green_2";
 			gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		user_green_3 {
+		led-user-green-3 {
 			label = "User_green_3";
 			gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		user_green_4 {
+		led-user-green-4 {
 			label = "User_green_4";
 			gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
 			default-state = "off";
@@ -76,6 +75,21 @@
 		};
 	};
 
+	miphy28lp_phy: miphy28lp {
+
+		phy_port1: port@9b2a000 {
+			st,osc-force-ext;
+		};
+	};
+
+	usb2_picophy1: phy2 {
+		status = "okay";
+	};
+
+	usb2_picophy2: phy3 {
+		status = "okay";
+	};
+
 	soc {
 		/* Low speed expansion connector */
 		uart0: serial@9830000 {
@@ -146,14 +160,6 @@
 			status = "okay";
 		};
 
-		usb2_picophy1: phy2@0 {
-			status = "okay";
-		};
-
-		usb2_picophy2: phy3@0 {
-			status = "okay";
-		};
-
 		ohci0: usb@9a03c00 {
 			status = "okay";
 		};
@@ -197,13 +203,6 @@
 			status = "okay";
 		};
 
-		miphy28lp_phy: miphy28lp@0 {
-
-			phy_port1: port@9b2a000 {
-				st,osc-force-ext;
-			};
-		};
-
 		sata1: sata@9b28000 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 81a8c25d7ba5..abac98a1810b 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -32,39 +32,37 @@
 		 */
 		clockgen-a9@92b0000 {
 			compatible = "st,clkgen-c32";
-			reg = <0x92b0000 0xffff>;
+			reg = <0x92b0000 0x10000>;
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
 				compatible = "st,stih407-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clockgen-a9-pll-odf";
 			};
-		};
-
-		/*
-		 * ARM CPU related clocks.
-		 */
-		clk_m_a9: clk-m-a9@92b0000 {
-			#clock-cells = <0>;
-			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
-			reg = <0x92b0000 0x10000>;
 
-			clocks = <&clockgen_a9_pll 0>,
-				 <&clockgen_a9_pll 0>,
-				 <&clk_s_c0_flexgen 13>,
-				 <&clk_m_a9_ext2f_div2>;
 			/*
-			 * ARM Peripheral clock for timers
+			 * ARM CPU related clocks.
 			 */
-			arm_periph_clk: clk-m-a9-periphs {
+			clk_m_a9: clk-m-a9 {
 				#clock-cells = <0>;
-				compatible = "fixed-factor-clock";
-				clocks = <&clk_m_a9>;
-				clock-div = <2>;
-				clock-mult = <1>;
+				compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+
+				clocks = <&clockgen_a9_pll 0>,
+					 <&clockgen_a9_pll 0>,
+					 <&clk_s_c0_flexgen 13>,
+					 <&clk_m_a9_ext2f_div2>;
+
+				/*
+				 * ARM Peripheral clock for timers
+				 */
+				arm_periph_clk: clk-m-a9-periphs {
+					#clock-cells = <0>;
+					compatible = "fixed-factor-clock";
+					clocks = <&clk_m_a9>;
+					clock-div = <2>;
+					clock-mult = <1>;
+				};
 			};
 		};
 
@@ -74,68 +72,49 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-a0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll-ofd-0";
-				clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-a0";
 
 				#clock-cells = <1>;
 
 				clocks = <&clk_s_a0_pll 0>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-ic-lmi0",
-						     "clk-ic-lmi1";
-				clock-critical = <CLK_IC_LMI0>;
 			};
 		};
 
-		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-pll";
-			reg = <0x9103000 0x1000>;
-
-			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-c0-fs0-ch0",
-					     "clk-s-c0-fs0-ch1",
-					     "clk-s-c0-fs0-ch2",
-					     "clk-s-c0-fs0-ch3";
-			clock-critical = <0>; /* clk-s-c0-fs0-ch0 */
-		};
-
 		clk_s_c0: clockgen-c@9103000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9103000 0x1000>;
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll0-odf-0";
-				clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */
 			};
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll1";
+				compatible = "st,clkgen-pll1-c0";
 
 				clocks = <&clk_sysin>;
+			};
+
+			clk_s_c0_quadfs: clk-s-c0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-pll";
 
-				clock-output-names = "clk-s-c0-pll1-odf-0";
+				clocks = <&clk_sysin>;
 			};
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-c0";
 
 				clocks = <&clk_s_c0_pll0 0>,
 					 <&clk_s_c0_pll1 0>,
@@ -145,52 +124,6 @@
 					 <&clk_s_c0_quadfs 3>,
 					 <&clk_sysin>;
 
-				clock-output-names = "clk-icn-gpu",
-						     "clk-fdma",
-						     "clk-nand",
-						     "clk-hva",
-						     "clk-proc-stfe",
-						     "clk-proc-tp",
-						     "clk-rx-icn-dmu",
-						     "clk-rx-icn-hva",
-						     "clk-icn-cpu",
-						     "clk-tx-icn-dmu",
-						     "clk-mmc-0",
-						     "clk-mmc-1",
-						     "clk-jpegdec",
-						     "clk-ext2fa9",
-						     "clk-ic-bdisp-0",
-						     "clk-ic-bdisp-1",
-						     "clk-pp-dmu",
-						     "clk-vid-dmu",
-						     "clk-dss-lpc",
-						     "clk-st231-aud-0",
-						     "clk-st231-gp-1",
-						     "clk-st231-dmu",
-						     "clk-icn-lmi",
-						     "clk-tx-icn-disp-1",
-						     "clk-icn-sbc",
-						     "clk-stfe-frc2",
-						     "clk-eth-phy",
-						     "clk-eth-ref-phyclk",
-						     "clk-flash-promip",
-						     "clk-main-disp",
-						     "clk-aux-disp",
-						     "clk-compo-dvp",
-						     "clk-tx-icn-hades",
-						     "clk-rx-icn-hades",
-						     "clk-icn-reg-16",
-						     "clk-pp-hades",
-						     "clk-clust-hades",
-						     "clk-hwpe-hades",
-						     "clk-fc-hades";
-				clock-critical = <CLK_PROC_STFE>,
-						 <CLK_ICN_CPU>,
-						 <CLK_TX_ICN_DMU>,
-						 <CLK_EXT2F_A9>,
-						 <CLK_ICN_LMI>,
-						 <CLK_ICN_SBC>;
-
 				/*
 				 * ARM Peripheral clock for timers
 				 */
@@ -208,62 +141,43 @@
 			};
 		};
 
-		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs";
-			reg = <0x9104000 0x1000>;
-
-			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d0-fs0-ch0",
-					     "clk-s-d0-fs0-ch1",
-					     "clk-s-d0-fs0-ch2",
-					     "clk-s-d0-fs0-ch3";
-		};
-
 		clockgen-d0@9104000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9104000 0x1000>;
 
+			clk_s_d0_quadfs: clk-s-d0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d0";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-audio", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-d0";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
 					 <&clk_s_d0_quadfs 2>,
 					 <&clk_s_d0_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-pcm-0",
-						     "clk-pcm-1",
-						     "clk-pcm-2",
-						     "clk-spdiff",
-						     "clk-pcmr10-master",
-						     "clk-usb2-phy";
 			};
 		};
 
-		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs";
-			reg = <0x9106000 0x1000>;
-
-			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d2-fs0-ch0",
-					     "clk-s-d2-fs0-ch1",
-					     "clk-s-d2-fs0-ch2",
-					     "clk-s-d2-fs0-ch3";
-		};
-
 		clockgen-d2@9106000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9106000 0x1000>;
 
+			clk_s_d2_quadfs: clk-s-d2-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d2";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-video", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d2";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -272,61 +186,29 @@
 					 <&clk_sysin>,
 					 <&clk_sysin>,
 					 <&clk_tmdsout_hdmi>;
-
-				clock-output-names = "clk-pix-main-disp",
-						     "clk-pix-pip",
-						     "clk-pix-gdp1",
-						     "clk-pix-gdp2",
-						     "clk-pix-gdp3",
-						     "clk-pix-gdp4",
-						     "clk-pix-aux-disp",
-						     "clk-denc",
-						     "clk-pix-hddac",
-						     "clk-hddac",
-						     "clk-sddac",
-						     "clk-pix-dvo",
-						     "clk-dvo",
-						     "clk-pix-hdmi",
-						     "clk-tmds-hdmi",
-						     "clk-ref-hdmiphy";
-						     };
-		};
-
-		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs";
-			reg = <0x9107000 0x1000>;
-
-			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d3-fs0-ch0",
-					     "clk-s-d3-fs0-ch1",
-					     "clk-s-d3-fs0-ch2",
-					     "clk-s-d3-fs0-ch3";
+			};
 		};
 
 		clockgen-d3@9107000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9107000 0x1000>;
 
+			clk_s_d3_quadfs: clk-s-d3-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d3";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d3";
 
 				clocks = <&clk_s_d3_quadfs 0>,
 					 <&clk_s_d3_quadfs 1>,
 					 <&clk_s_d3_quadfs 2>,
 					 <&clk_s_d3_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-stfe-frc1",
-						     "clk-tsout-0",
-						     "clk-tsout-1",
-						     "clk-mchi",
-						     "clk-vsens-compo",
-						     "clk-frc1-remote",
-						     "clk-lpc-0",
-						     "clk-lpc-1";
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 6d847019c554..29e95e9d3229 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -12,31 +12,29 @@
 		bdisp0 = &bdisp0;
 	};
 
-	soc {
-		usb2_picophy1: phy2@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0xf8 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY0_RESET>;
-			reset-names = "global", "port";
-
-			status = "disabled";
-		};
+	usb2_picophy1: phy2 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0xf8 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY0_RESET>;
+		reset-names = "global", "port";
+
+		status = "disabled";
+	};
 
-		usb2_picophy2: phy3@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0xfc 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY1_RESET>;
-			reset-names = "global", "port";
+	usb2_picophy2: phy3 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0xfc 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY1_RESET>;
+		reset-names = "global", "port";
 
-			status = "disabled";
-		};
+		status = "disabled";
+	};
 
+	soc {
 		ohci0: usb@9a03c00 {
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
@@ -107,7 +105,7 @@
 			#size-cells = <1>;
 
 			reg = <0 0>;
-			assigned-clocks	= <&clk_s_d2_quadfs 0>,
+			assigned-clocks = <&clk_s_d2_quadfs 0>,
 					  <&clk_s_d2_quadfs 1>,
 					  <&clk_s_c0_pll1 0>,
 					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
@@ -200,7 +198,7 @@
 				reg-names = "hdmi-reg";
 				#sound-dai-cells = <0>;
 				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names	= "irq";
+				interrupt-names = "irq";
 				clock-names = "pix",
 					      "tmds",
 					      "phy",
@@ -274,17 +272,7 @@
 			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		delta0@0 {
-			compatible = "st,st-delta";
-			clock-names = "delta",
-				      "delta-st231",
-				      "delta-flash-promip";
-			clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
-				 <&clk_s_c0_flexgen CLK_ST231_DMU>,
-				 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
-		};
-
-		sti-cec@94a087c {
+		cec@94a087c {
 			compatible = "st,stih-cec";
 			reg = <0x94a087c 0x64>;
 			clocks = <&clk_sysin>;
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index 48c3c64e4c48..53ac6c2b7b7d 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -11,7 +11,6 @@
 	compatible = "st,stih418-b2199", "st,stih418";
 
 	chosen {
-		bootargs = "clk_ignore_unused";
 		stdout-path = &sbc_serial0;
 	};
 
@@ -27,17 +26,28 @@
 
 	leds {
 		compatible = "gpio-leds";
-		red {
+		led-red {
 			label = "Front Panel LED";
 			gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
-		green {
+		led-green {
 			gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 	};
 
+	miphy28lp_phy: miphy28lp {
+
+		phy_port0: port@9b22000 {
+			st,osc-rdy;
+		};
+
+		phy_port1: port@9b2a000 {
+			st,osc-force-ext;
+		};
+	};
+
 	soc {
 		sbc_serial0: serial@9530000 {
 			status = "okay";
@@ -85,17 +95,6 @@
 			non-removable;
 		};
 
-		miphy28lp_phy: miphy28lp@0 {
-
-			phy_port0: port@9b22000 {
-				st,osc-rdy;
-			};
-
-			phy_port1: port@9b2a000 {
-				st,osc-force-ext;
-			};
-		};
-
 		st_dwc3: dwc3@8f94000 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/stih418-b2264.dts b/arch/arm/boot/dts/stih418-b2264.dts
new file mode 100644
index 000000000000..fc32a03073b6
--- /dev/null
+++ b/arch/arm/boot/dts/stih418-b2264.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 STMicroelectronics
+ * Author: Alain Volmat <avolmat@me.com>
+ */
+/dts-v1/;
+#include "stih418.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	model = "STiH418 B2264";
+	compatible = "st,stih418-b2264", "st,stih418";
+
+	chosen {
+		stdout-path = &sbc_serial0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0xc0000000>;
+	};
+
+	cpus {
+		cpu@0 {
+			operating-points-v2 = <&cpu_opp_table>;
+			/* u-boot puts hpen in SBC dmem at 0xb8 offset */
+			cpu-release-addr = <0x94100b8>;
+		};
+		cpu@1 {
+			operating-points-v2 = <&cpu_opp_table>;
+			/* u-boot puts hpen in SBC dmem at 0xb8 offset */
+			cpu-release-addr = <0x94100b8>;
+		};
+		cpu@2 {
+			operating-points-v2 = <&cpu_opp_table>;
+			/* u-boot puts hpen in SBC dmem at 0xb8 offset */
+			cpu-release-addr = <0x94100b8>;
+		};
+		cpu@3 {
+			operating-points-v2 = <&cpu_opp_table>;
+			/* u-boot puts hpen in SBC dmem at 0xb8 offset */
+			cpu-release-addr = <0x94100b8>;
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <784000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <784000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <784000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <784000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <784000>;
+		};
+	};
+
+	aliases {
+		ttyAS0 = &sbc_serial0;
+		ethernet0 = &ethernet0;
+	};
+
+	soc {
+		leds {
+			compatible = "gpio-leds";
+			led-green {
+				gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+
+		pin-controller-sbc@961f080 {
+			gmac1 {
+				rgmii1-0 {
+					st,pins {
+						rxd0 = <&pio1 4 ALT1 IN DE_IO 300 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN DE_IO 300 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN DE_IO 300 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN DE_IO 300 CLK_A>;
+						rxdv = <&pio2 0 ALT1 IN DE_IO 300 CLK_A>;
+					};
+				};
+			};
+		};
+
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ethernet0 {
+	phy-mode = "rgmii";
+	pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
+	st,tx-retime-src = "clkgen";
+
+	snps,reset-gpio = <&pio0 7 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+
+	status = "okay";
+};
+
+&miphy28lp_phy {
+	phy_port0: port@9b22000 {
+		st,sata-gen = <2>; /* SATA GEN3 */
+		st,osc-rdy;
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sbc_serial0 {
+	status = "okay";
+};
+
+&spifsm {
+	status = "okay";
+};
+
+&st_dwc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index 8fa092462102..e1749e92a2e7 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -32,40 +32,37 @@
 		 */
 		clockgen-a9@92b0000 {
 			compatible = "st,clkgen-c32";
-			reg = <0x92b0000 0xffff>;
+			reg = <0x92b0000 0x10000>;
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
 				compatible = "st,stih418-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clockgen-a9-pll-odf";
 			};
-		};
-
-		/*
-		 * ARM CPU related clocks.
-		 */
-		clk_m_a9: clk-m-a9@92b0000 {
-			#clock-cells = <0>;
-			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
-			reg = <0x92b0000 0x10000>;
-
-			clocks = <&clockgen_a9_pll 0>,
-				 <&clockgen_a9_pll 0>,
-				 <&clk_s_c0_flexgen 13>,
-				 <&clk_m_a9_ext2f_div2>;
 
 			/*
-			 * ARM Peripheral clock for timers
+			 * ARM CPU related clocks.
 			 */
-			arm_periph_clk: clk-m-a9-periphs {
+			clk_m_a9: clk-m-a9 {
 				#clock-cells = <0>;
-				compatible = "fixed-factor-clock";
-				clocks = <&clk_m_a9>;
-				clock-div = <2>;
-				clock-mult = <1>;
+				compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+
+				clocks = <&clockgen_a9_pll 0>,
+					 <&clockgen_a9_pll 0>,
+					 <&clk_s_c0_flexgen 13>,
+					 <&clk_m_a9_ext2f_div2>;
+
+				/*
+				 * ARM Peripheral clock for timers
+				 */
+				arm_periph_clk: clk-m-a9-periphs {
+					#clock-cells = <0>;
+					compatible = "fixed-factor-clock";
+					clocks = <&clk_m_a9>;
+					clock-div = <2>;
+					clock-mult = <1>;
+				};
 			};
 		};
 
@@ -75,64 +72,49 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-a0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-a0-pll-ofd-0";
 			};
 
 			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-a0";
 
 				#clock-cells = <1>;
 
 				clocks = <&clk_s_a0_pll 0>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-ic-lmi0",
-						     "clk-ic-lmi1";
 			};
 		};
 
-		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-pll";
-			reg = <0x9103000 0x1000>;
-
-			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-c0-fs0-ch0",
-					     "clk-s-c0-fs0-ch1",
-					     "clk-s-c0-fs0-ch2",
-					     "clk-s-c0-fs0-ch3";
-		};
-
 		clk_s_c0: clockgen-c@9103000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9103000 0x1000>;
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0";
+				compatible = "st,clkgen-pll0-c0";
 
 				clocks = <&clk_sysin>;
-
-				clock-output-names = "clk-s-c0-pll0-odf-0";
 			};
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,clkgen-pll1";
+				compatible = "st,clkgen-pll1-c0";
 
 				clocks = <&clk_sysin>;
+			};
+
+			clk_s_c0_quadfs: clk-s-c0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-pll";
 
-				clock-output-names = "clk-s-c0-pll1-odf-0";
+				clocks = <&clk_sysin>;
 			};
 
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih418-c0";
 
 				clocks = <&clk_s_c0_pll0 0>,
 					 <&clk_s_c0_pll1 0>,
@@ -142,49 +124,6 @@
 					 <&clk_s_c0_quadfs 3>,
 					 <&clk_sysin>;
 
-				clock-output-names = "clk-icn-gpu",
-						     "clk-fdma",
-						     "clk-nand",
-						     "clk-hva",
-						     "clk-proc-stfe",
-						     "clk-tp",
-						     "clk-rx-icn-dmu",
-						     "clk-rx-icn-hva",
-						     "clk-icn-cpu",
-						     "clk-tx-icn-dmu",
-						     "clk-mmc-0",
-						     "clk-mmc-1",
-						     "clk-jpegdec",
-						     "clk-icn-reg",
-						     "clk-proc-bdisp-0",
-						     "clk-proc-bdisp-1",
-						     "clk-pp-dmu",
-						     "clk-vid-dmu",
-						     "clk-dss-lpc",
-						     "clk-st231-aud-0",
-						     "clk-st231-gp-1",
-						     "clk-st231-dmu",
-						     "clk-icn-lmi",
-						     "clk-tx-icn-1",
-						     "clk-icn-sbc",
-						     "clk-stfe-frc2",
-						     "clk-eth-phyref",
-						     "clk-eth-ref-phyclk",
-						     "clk-flash-promip",
-						     "clk-main-disp",
-						     "clk-aux-disp",
-						     "clk-compo-dvp",
-						     "clk-tx-icn-hades",
-						     "clk-rx-icn-hades",
-						     "clk-icn-reg-16",
-						     "clk-pp-hevc",
-						     "clk-clust-hevc",
-						     "clk-hwpe-hevc",
-						     "clk-fc-hevc",
-						     "clk-proc-mixer",
-						     "clk-proc-sc",
-						     "clk-avsp-hevc";
-
 				/*
 				 * ARM Peripheral clock for timers
 				 */
@@ -202,62 +141,43 @@
 			};
 		};
 
-		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs";
-			reg = <0x9104000 0x1000>;
-
-			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d0-fs0-ch0",
-					     "clk-s-d0-fs0-ch1",
-					     "clk-s-d0-fs0-ch2",
-					     "clk-s-d0-fs0-ch3";
-		};
-
 		clockgen-d0@9104000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9104000 0x1000>;
 
+			clk_s_d0_quadfs: clk-s-d0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d0";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-audio", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih410-d0";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
 					 <&clk_s_d0_quadfs 2>,
 					 <&clk_s_d0_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-pcm-0",
-						     "clk-pcm-1",
-						     "clk-pcm-2",
-						     "clk-spdiff",
-						     "clk-pcmr10-master",
-						     "clk-usb2-phy";
 			};
 		};
 
-		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs";
-			reg = <0x9106000 0x1000>;
-
-			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d2-fs0-ch0",
-					     "clk-s-d2-fs0-ch1",
-					     "clk-s-d2-fs0-ch2",
-					     "clk-s-d2-fs0-ch3";
-		};
-
 		clockgen-d2@9106000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9106000 0x1000>;
 
+			clk_s_d2_quadfs: clk-s-d2-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d2";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen-video", "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih418-d2";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -266,68 +186,29 @@
 					 <&clk_sysin>,
 					 <&clk_sysin>,
 					 <&clk_tmdsout_hdmi>;
-
-				clock-output-names = "clk-pix-main-disp",
-						     "",
-						     "",
-						     "",
-						     "",
-						     "clk-tmds-hdmi-div2",
-						     "clk-pix-aux-disp",
-						     "clk-denc",
-						     "clk-pix-hddac",
-						     "clk-hddac",
-						     "clk-sddac",
-						     "clk-pix-dvo",
-						     "clk-dvo",
-						     "clk-pix-hdmi",
-						     "clk-tmds-hdmi",
-						     "clk-ref-hdmiphy",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "", "", "", "",
-						     "", "clk-vp9";
 			};
 		};
 
-		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs";
-			reg = <0x9107000 0x1000>;
-
-			clocks = <&clk_sysin>;
-
-			clock-output-names = "clk-s-d3-fs0-ch0",
-					     "clk-s-d3-fs0-ch1",
-					     "clk-s-d3-fs0-ch2",
-					     "clk-s-d3-fs0-ch3";
-		};
-
 		clockgen-d3@9107000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9107000 0x1000>;
 
+			clk_s_d3_quadfs: clk-s-d3-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d3";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen", "st,flexgen-stih407-d3";
 
 				clocks = <&clk_s_d3_quadfs 0>,
 					 <&clk_s_d3_quadfs 1>,
 					 <&clk_s_d3_quadfs 2>,
 					 <&clk_s_d3_quadfs 3>,
 					 <&clk_sysin>;
-
-				clock-output-names = "clk-stfe-frc1",
-						     "clk-tsout-0",
-						     "clk-tsout-1",
-						     "clk-mchi",
-						     "clk-vsens-compo",
-						     "clk-frc1-remote",
-						     "clk-lpc-0",
-						     "clk-lpc-1";
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
index a05e2278b448..b35b9b7a7ccc 100644
--- a/arch/arm/boot/dts/stih418.dtsi
+++ b/arch/arm/boot/dts/stih418.dtsi
@@ -26,25 +26,27 @@
 		};
 	};
 
-	soc {
-		usb2_picophy1: phy2@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0xf8 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY0_RESET>;
-			reset-names = "global", "port";
-		};
+	usb2_picophy1: phy2 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0xf8 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY0_RESET>;
+		reset-names = "global", "port";
+	};
+
+	usb2_picophy2: phy3 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0xfc 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY1_RESET>;
+		reset-names = "global", "port";
+	};
 
-		usb2_picophy2: phy3@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0xfc 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY1_RESET>;
-			reset-names = "global", "port";
+	soc {
+		rng11: rng@8a8a000 {
+			status = "disabled";
 		};
 
 		ohci0: usb@9a03c00 {
@@ -104,5 +106,13 @@
 			assigned-clock-parents = <&clk_s_c0_pll1 0>;
 			assigned-clock-rates = <200000000>;
 		};
+
+		thermal@91a0000 {
+			compatible = "st,stih407-thermal";
+			reg = <0x91a0000 0x28>;
+			clock-names = "thermal";
+			clocks = <&clk_sysin>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index d051f080e52e..8d9a2dfa76f1 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -9,12 +9,12 @@
 / {
 	leds {
 		compatible = "gpio-leds";
-		red {
+		led-red {
 			label = "Front Panel LED";
 			gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
-		green {
+		led-green {
 			gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
@@ -71,6 +71,17 @@
 		};
 	};
 
+	miphy28lp_phy: miphy28lp {
+
+		phy_port0: port@9b22000 {
+			st,osc-rdy;
+		};
+
+		phy_port1: port@9b2a000 {
+			st,osc-force-ext;
+		};
+	};
+
 	soc {
 		sbc_serial0: serial@9530000 {
 			status = "okay";
@@ -128,17 +139,6 @@
 			st,i2c-min-sda-pulse-width-us = <5>;
 		};
 
-		miphy28lp_phy: miphy28lp@0 {
-
-			phy_port0: port@9b22000 {
-				st,osc-rdy;
-			};
-
-			phy_port1: port@9b2a000 {
-				st,osc-force-ext;
-			};
-		};
-
 		st_dwc3: dwc3@8f94000 {
 			status = "okay";
 		};
@@ -175,11 +175,11 @@
 
 			/* tsin0 is TSA on NIMA */
 			tsin0: port {
-				tsin-num	= <0>;
+				tsin-num = <0>;
 				serial-not-parallel;
-				i2c-bus		= <&ssc2>;
-				reset-gpios	= <&pio15 4 GPIO_ACTIVE_HIGH>;
-				dvb-card	= <STV0367_TDA18212_NIMA_1>;
+				i2c-bus = <&ssc2>;
+				reset-gpios = <&pio15 4 GPIO_ACTIVE_LOW>;
+				dvb-card = <STV0367_TDA18212_NIMA_1>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 7e10ae744c9d..576235ec3c51 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -50,6 +50,7 @@
 #include "stm32f429-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
 
 / {
 	model = "STMicroelectronics STM32429i-EVAL board";
@@ -60,7 +61,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@00000000 {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x2000000>;
 	};
@@ -119,17 +120,15 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "Wake up";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioa 0 0>;
 		};
-		button@1 {
+		button-1 {
 			label = "Tamper";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpioc 13 0>;
@@ -188,7 +187,7 @@
 	port {
 		dcmi_0: endpoint {
 			remote-endpoint = <&ov2640_0>;
-			bus-type = <5>;
+			bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
 			bus-width = <8>;
 			hsync-active = <0>;
 			vsync-active = <0>;
@@ -253,10 +252,10 @@
 
 &mac {
 	status = "okay";
-	pinctrl-0	= <&ethernet_mii>;
-	pinctrl-names	= "default";
-	phy-mode	= "mii";
-	phy-handle	= <&phy1>;
+	pinctrl-0 = <&ethernet_mii>;
+	pinctrl-names = "default";
+	phy-mode = "mii";
+	phy-handle = <&phy1>;
 	mdio0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -310,6 +309,18 @@
 	};
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index ca8c192449ee..a293e65141c6 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -81,12 +81,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "Wake up";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioc 13 0>;
@@ -196,6 +194,18 @@
 	bus-width = <4>;
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index 4774163af54b..3bb812d6399e 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -45,13 +45,12 @@
 
 / {
 	soc {
-		pinctrl: pin-controller {
+		pinctrl: pinctrl@40020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x40020000 0x3000>;
 			interrupt-parent = <&exti>;
 			st,syscfg = <&syscfg 0x8>;
-			pins-are-numbered;
 
 			gpioa: gpio@40020000 {
 				gpio-controller;
@@ -448,6 +447,36 @@
 					slew-rate = <2>;
 				};
 			};
+
+			can1_pins_a: can1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */
+					bias-pull-up;
+				};
+			};
+
+			can2_pins_a: can2-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
+
+			can2_pins_b: can2-1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */
+					bias-pull-up;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 3dc068b91ca1..3b81228d46a2 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -81,12 +81,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpioa 0 0>;
@@ -194,7 +192,7 @@
 
 	display: display@1{
 		/* Connect panel-ilitek-9341 to ltdc */
-		compatible = "st,sf-tc240t-9370-t";
+		compatible = "st,sf-tc240t-9370-t", "ilitek,ili9341";
 		reg = <1>;
 		spi-3wire;
 		spi-max-frequency = <10000000>;
@@ -207,6 +205,18 @@
 	};
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f429-pinctrl.dtsi b/arch/arm/boot/dts/stm32f429-pinctrl.dtsi
index 3e7a17d9112e..e10d7a1f3207 100644
--- a/arch/arm/boot/dts/stm32f429-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f429-pinctrl.dtsi
@@ -42,54 +42,50 @@
 
 #include "stm32f4-pinctrl.dtsi"
 
-/ {
-	soc {
-		pinctrl: pin-controller {
-			compatible = "st,stm32f429-pinctrl";
+&pinctrl {
+	compatible = "st,stm32f429-pinctrl";
 
-			gpioa: gpio@40020000 {
-				gpio-ranges = <&pinctrl 0 0 16>;
-			};
+	gpioa: gpio@40020000 {
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
 
-			gpiob: gpio@40020400 {
-				gpio-ranges = <&pinctrl 0 16 16>;
-			};
+	gpiob: gpio@40020400 {
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
 
-			gpioc: gpio@40020800 {
-				gpio-ranges = <&pinctrl 0 32 16>;
-			};
+	gpioc: gpio@40020800 {
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
 
-			gpiod: gpio@40020c00 {
-				gpio-ranges = <&pinctrl 0 48 16>;
-			};
+	gpiod: gpio@40020c00 {
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
 
-			gpioe: gpio@40021000 {
-				gpio-ranges = <&pinctrl 0 64 16>;
-			};
+	gpioe: gpio@40021000 {
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
 
-			gpiof: gpio@40021400 {
-				gpio-ranges = <&pinctrl 0 80 16>;
-			};
+	gpiof: gpio@40021400 {
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
 
-			gpiog: gpio@40021800 {
-				gpio-ranges = <&pinctrl 0 96 16>;
-			};
+	gpiog: gpio@40021800 {
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
 
-			gpioh: gpio@40021c00 {
-				gpio-ranges = <&pinctrl 0 112 16>;
-			};
+	gpioh: gpio@40021c00 {
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
 
-			gpioi: gpio@40022000 {
-				gpio-ranges = <&pinctrl 0 128 16>;
-			};
+	gpioi: gpio@40022000 {
+		gpio-ranges = <&pinctrl 0 128 16>;
+	};
 
-			gpioj: gpio@40022400 {
-				gpio-ranges = <&pinctrl 0 144 16>;
-			};
+	gpioj: gpio@40022400 {
+		gpio-ranges = <&pinctrl 0 144 16>;
+	};
 
-			gpiok: gpio@40022800 {
-				gpio-ranges = <&pinctrl 0 160 8>;
-			};
-		};
+	gpiok: gpio@40022800 {
+		gpio-ranges = <&pinctrl 0 160 8>;
 	};
 };
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index f6530d724d00..c9e05e3540d6 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -93,14 +93,6 @@
 			};
 		};
 
-		timer2: timer@40000000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000000 0x400>;
-			interrupts = <28>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>;
-			status = "disabled";
-		};
-
 		timers2: timers@40000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -123,14 +115,6 @@
 			};
 		};
 
-		timer3: timer@40000400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000400 0x400>;
-			interrupts = <29>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
-			status = "disabled";
-		};
-
 		timers3: timers@40000400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -153,14 +137,6 @@
 			};
 		};
 
-		timer4: timer@40000800 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000800 0x400>;
-			interrupts = <30>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
-			status = "disabled";
-		};
-
 		timers4: timers@40000800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -183,13 +159,6 @@
 			};
 		};
 
-		timer5: timer@40000c00 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000c00 0x400>;
-			interrupts = <50>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>;
-		};
-
 		timers5: timers@40000c00 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -212,14 +181,6 @@
 			};
 		};
 
-		timer6: timer@40001000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001000 0x400>;
-			interrupts = <54>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
-			status = "disabled";
-		};
-
 		timers6: timers@40001000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -236,14 +197,6 @@
 			};
 		};
 
-		timer7: timer@40001400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001400 0x400>;
-			interrupts = <55>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
-			status = "disabled";
-		};
-
 		timers7: timers@40001400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -283,8 +236,6 @@
 		};
 
 		timers13: timers@40001c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001C00 0x400>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>;
@@ -299,8 +250,6 @@
 		};
 
 		timers14: timers@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>;
@@ -413,6 +362,35 @@
 			status = "disabled";
 		};
 
+		can1: can@40006400 {
+			compatible = "st,stm32f4-bxcan";
+			reg = <0x40006400 0x200>;
+			interrupts = <19>, <20>, <21>, <22>;
+			interrupt-names = "tx", "rx0", "rx1", "sce";
+			resets = <&rcc STM32F4_APB1_RESET(CAN1)>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN1)>;
+			st,can-primary;
+			st,gcan = <&gcan>;
+			status = "disabled";
+		};
+
+		gcan: gcan@40006600 {
+			compatible = "st,stm32f4-gcan", "syscon";
+			reg = <0x40006600 0x200>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN1)>;
+		};
+
+		can2: can@40006800 {
+			compatible = "st,stm32f4-bxcan";
+			reg = <0x40006800 0x200>;
+			interrupts = <63>, <64>, <65>, <66>;
+			interrupt-names = "tx", "rx0", "rx1", "sce";
+			resets = <&rcc STM32F4_APB1_RESET(CAN2)>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN2)>;
+			st,gcan = <&gcan>;
+			status = "disabled";
+		};
+
 		dac: dac@40007400 {
 			compatible = "st,stm32f4-dac-core";
 			reg = <0x40007400 0x400>;
@@ -633,8 +611,6 @@
 		};
 
 		timers10: timers@40014400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014400 0x400>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>;
@@ -649,8 +625,6 @@
 		};
 
 		timers11: timers@40014800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014800 0x400>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>;
@@ -709,7 +683,7 @@
 			status = "disabled";
 		};
 
-		rcc: rcc@40023810 {
+		rcc: rcc@40023800 {
 			#reset-cells = <1>;
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
@@ -767,6 +741,16 @@
 			status = "disabled";
 		};
 
+		dma2d: dma2d@4002b000 {
+			compatible = "st,stm32-dma2d";
+			reg = <0x4002b000 0xc00>;
+			interrupts = <90>;
+			resets = <&rcc STM32F4_AHB1_RESET(DMA2D)>;
+			clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2D)>;
+			clock-names = "dma2d";
+			status = "disabled";
+		};
+
 		usbotg_hs: usb@40040000 {
 			compatible = "snps,dwc2";
 			reg = <0x40040000 0x40000>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 2e1b3bbbe4b5..5a0daf8e8b11 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -60,7 +60,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@00000000 {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x1000000>;
 	};
@@ -104,12 +104,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
@@ -134,6 +132,10 @@
 	clock-frequency = <8000000>;
 };
 
+&dma2d {
+	status = "okay";
+};
+
 &dsi {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -226,6 +228,18 @@
 	bus-width = <4>;
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart3 {
 	pinctrl-0 = <&usart3_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f469-pinctrl.dtsi b/arch/arm/boot/dts/stm32f469-pinctrl.dtsi
index fff542662eea..6bf60263dff8 100644
--- a/arch/arm/boot/dts/stm32f469-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f469-pinctrl.dtsi
@@ -42,55 +42,51 @@
 
 #include "stm32f4-pinctrl.dtsi"
 
-/ {
-	soc {
-		pinctrl: pin-controller {
-			compatible = "st,stm32f469-pinctrl";
+&pinctrl {
+	compatible = "st,stm32f469-pinctrl";
 
-			gpioa: gpio@40020000 {
-				gpio-ranges = <&pinctrl 0 0 16>;
-			};
+	gpioa: gpio@40020000 {
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
 
-			gpiob: gpio@40020400 {
-				gpio-ranges = <&pinctrl 0 16 16>;
-			};
+	gpiob: gpio@40020400 {
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
 
-			gpioc: gpio@40020800 {
-				gpio-ranges = <&pinctrl 0 32 16>;
-			};
+	gpioc: gpio@40020800 {
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
 
-			gpiod: gpio@40020c00 {
-				gpio-ranges = <&pinctrl 0 48 16>;
-			};
+	gpiod: gpio@40020c00 {
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
 
-			gpioe: gpio@40021000 {
-				gpio-ranges = <&pinctrl 0 64 16>;
-			};
+	gpioe: gpio@40021000 {
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
 
-			gpiof: gpio@40021400 {
-				gpio-ranges = <&pinctrl 0 80 16>;
-			};
+	gpiof: gpio@40021400 {
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
 
-			gpiog: gpio@40021800 {
-				gpio-ranges = <&pinctrl 0 96 16>;
-			};
+	gpiog: gpio@40021800 {
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
 
-			gpioh: gpio@40021c00 {
-				gpio-ranges = <&pinctrl 0 112 16>;
-			};
+	gpioh: gpio@40021c00 {
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
 
-			gpioi: gpio@40022000 {
-				gpio-ranges = <&pinctrl 0 128 16>;
-			};
+	gpioi: gpio@40022000 {
+		gpio-ranges = <&pinctrl 0 128 16>;
+	};
 
-			gpioj: gpio@40022400 {
-				gpio-ranges = <&pinctrl 0 144 6>,
-					      <&pinctrl 12 156 4>;
-			};
+	gpioj: gpio@40022400 {
+		gpio-ranges = <&pinctrl 0 144 6>,
+			      <&pinctrl 12 156 4>;
+	};
 
-			gpiok: gpio@40022800 {
-				gpio-ranges = <&pinctrl 3 163 5>;
-			};
-		};
+	gpiok: gpio@40022800 {
+		gpio-ranges = <&pinctrl 3 163 5>;
 	};
 };
diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index fe4cfda72a47..c8e6c52fb248 100644
--- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -9,13 +9,12 @@
 
 / {
 	soc {
-		pinctrl: pin-controller {
+		pinctrl: pinctrl@40020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x40020000 0x3000>;
 			interrupt-parent = <&exti>;
 			st,syscfg = <&syscfg 0x8>;
-			pins-are-numbered;
 
 			gpioa: gpio@40020000 {
 				gpio-controller;
diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
index 569d23cc61e5..c11616ed5fc6 100644
--- a/arch/arm/boot/dts/stm32f746-disco.dts
+++ b/arch/arm/boot/dts/stm32f746-disco.dts
@@ -109,6 +109,18 @@
 	bus-width = <4>;
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_b>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index e1df603fc981..dc868e6da40e 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -75,14 +75,6 @@
 	};
 
 	soc {
-		timer2: timer@40000000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000000 0x400>;
-			interrupts = <28>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
-			status = "disabled";
-		};
-
 		timers2: timers@40000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -105,14 +97,6 @@
 			};
 		};
 
-		timer3: timer@40000400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000400 0x400>;
-			interrupts = <29>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
-			status = "disabled";
-		};
-
 		timers3: timers@40000400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -135,14 +119,6 @@
 			};
 		};
 
-		timer4: timer@40000800 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000800 0x400>;
-			interrupts = <30>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
-			status = "disabled";
-		};
-
 		timers4: timers@40000800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -165,13 +141,6 @@
 			};
 		};
 
-		timer5: timer@40000c00 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000c00 0x400>;
-			interrupts = <50>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
-		};
-
 		timers5: timers@40000c00 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -194,14 +163,6 @@
 			};
 		};
 
-		timer6: timer@40001000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001000 0x400>;
-			interrupts = <54>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
-			status = "disabled";
-		};
-
 		timers6: timers@40001000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -218,14 +179,6 @@
 			};
 		};
 
-		timer7: timer@40001400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001400 0x400>;
-			interrupts = <55>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
-			status = "disabled";
-		};
-
 		timers7: timers@40001400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -265,8 +218,6 @@
 		};
 
 		timers13: timers@40001c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001C00 0x400>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
@@ -281,8 +232,6 @@
 		};
 
 		timers14: timers@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
@@ -364,9 +313,9 @@
 			status = "disabled";
 		};
 
-		i2c3: i2c@40005C00 {
+		i2c3: i2c@40005c00 {
 			compatible = "st,stm32f7-i2c";
-			reg = <0x40005C00 0x400>;
+			reg = <0x40005c00 0x400>;
 			interrupts = <72>,
 				     <73>;
 			resets = <&rcc STM32F7_APB1_RESET(I2C3)>;
@@ -531,8 +480,6 @@
 		};
 
 		timers10: timers@40014400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014400 0x400>;
 			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
@@ -547,8 +494,6 @@
 		};
 
 		timers11: timers@40014800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014800 0x400>;
 			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index 0ce7fbc20fa4..b038d0ed39e8 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -75,12 +75,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
@@ -139,6 +137,18 @@
 	bus-width = <4>;
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32h7-pinctrl.dtsi b/arch/arm/boot/dts/stm32h7-pinctrl.dtsi
new file mode 100644
index 000000000000..aa1bc3e10a49
--- /dev/null
+++ b/arch/arm/boot/dts/stm32h7-pinctrl.dtsi
@@ -0,0 +1,275 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+
+	i2c1_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
+				 <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	ethernet_rmii: rmii-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 11, AF11)>,
+				 <STM32_PINMUX('G', 13, AF11)>,
+				 <STM32_PINMUX('G', 12, AF11)>,
+				 <STM32_PINMUX('C', 4, AF11)>,
+				 <STM32_PINMUX('C', 5, AF11)>,
+				 <STM32_PINMUX('A', 7, AF11)>,
+				 <STM32_PINMUX('C', 1, AF11)>,
+				 <STM32_PINMUX('A', 2, AF11)>,
+				 <STM32_PINMUX('A', 1, AF11)>;
+			slew-rate = <2>;
+		};
+	};
+
+	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <3>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
+			bias-pull-up;
+		};
+	};
+
+	sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+				 <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
+		};
+	};
+
+	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 6, AF11)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 6, AF11)>; /* SDMMC1_CK */
+			slew-rate = <3>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
+			slew-rate = <3>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 7, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	spi1_pins: spi1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 5, AF5)>,
+				/* SPI1_CLK */
+				 <STM32_PINMUX('B', 5, AF5)>;
+				/* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 9, AF5)>;
+				/* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
+	uart4_pins: uart4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 0, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 9, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	usart1_pins: usart1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_pins: usart2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	usart3_pins: usart3-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('D', 12, AF7)>; /* USART3_RTS_DE */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */
+				 <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usbotg_hs_pins_a: usbotg-hs-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 4, AF10)>,	/* ULPI_NXT */
+					 <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
+					 <STM32_PINMUX('C', 0, AF10)>,	/* ULPI_STP> */
+					 <STM32_PINMUX('A', 5, AF10)>,	/* ULPI_CK> */
+					 <STM32_PINMUX('A', 3, AF10)>,	/* ULPI_D0> */
+					 <STM32_PINMUX('B', 0, AF10)>,	/* ULPI_D1> */
+					 <STM32_PINMUX('B', 1, AF10)>,	/* ULPI_D2> */
+					 <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
+					 <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
+					 <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
+					 <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
+					 <STM32_PINMUX('B', 5, AF10)>;	/* ULPI_D7> */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
deleted file mode 100644
index fa5dcb6a5fdd..000000000000
--- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/pinctrl/stm32-pinfunc.h>
-
-/ {
-	soc {
-		pin-controller {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32h743-pinctrl";
-			ranges = <0 0x58020000 0x3000>;
-			interrupt-parent = <&exti>;
-			st,syscfg = <&syscfg 0x8>;
-			pins-are-numbered;
-
-			gpioa: gpio@58020000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x0 0x400>;
-				clocks = <&rcc GPIOA_CK>;
-				st,bank-name = "GPIOA";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpiob: gpio@58020400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x400 0x400>;
-				clocks = <&rcc GPIOB_CK>;
-				st,bank-name = "GPIOB";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpioc: gpio@58020800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x800 0x400>;
-				clocks = <&rcc GPIOC_CK>;
-				st,bank-name = "GPIOC";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpiod: gpio@58020c00 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0xc00 0x400>;
-				clocks = <&rcc GPIOD_CK>;
-				st,bank-name = "GPIOD";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpioe: gpio@58021000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x1000 0x400>;
-				clocks = <&rcc GPIOE_CK>;
-				st,bank-name = "GPIOE";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpiof: gpio@58021400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x1400 0x400>;
-				clocks = <&rcc GPIOF_CK>;
-				st,bank-name = "GPIOF";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpiog: gpio@58021800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x1800 0x400>;
-				clocks = <&rcc GPIOG_CK>;
-				st,bank-name = "GPIOG";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpioh: gpio@58021c00 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x1c00 0x400>;
-				clocks = <&rcc GPIOH_CK>;
-				st,bank-name = "GPIOH";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpioi: gpio@58022000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x2000 0x400>;
-				clocks = <&rcc GPIOI_CK>;
-				st,bank-name = "GPIOI";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpioj: gpio@58022400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x2400 0x400>;
-				clocks = <&rcc GPIOJ_CK>;
-				st,bank-name = "GPIOJ";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpiok: gpio@58022800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x2800 0x400>;
-				clocks = <&rcc GPIOK_CK>;
-				st,bank-name = "GPIOK";
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			i2c1_pins_a: i2c1-0 {
-				pins {
-					pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
-						 <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
-					bias-disable;
-					drive-open-drain;
-					slew-rate = <0>;
-				};
-			};
-
-			ethernet_rmii: rmii-0 {
-				pins {
-					pinmux = <STM32_PINMUX('G', 11, AF11)>,
-						 <STM32_PINMUX('G', 13, AF11)>,
-						 <STM32_PINMUX('G', 12, AF11)>,
-						 <STM32_PINMUX('C', 4, AF11)>,
-						 <STM32_PINMUX('C', 5, AF11)>,
-						 <STM32_PINMUX('A', 7, AF11)>,
-						 <STM32_PINMUX('C', 1, AF11)>,
-						 <STM32_PINMUX('A', 2, AF11)>,
-						 <STM32_PINMUX('A', 1, AF11)>;
-					slew-rate = <2>;
-				};
-			};
-
-			sdmmc1_b4_pins_a: sdmmc1-b4-0 {
-				pins {
-					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
-						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
-						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
-						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
-						 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
-						 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
-					slew-rate = <3>;
-					drive-push-pull;
-					bias-disable;
-				};
-			};
-
-			sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
-						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
-						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
-						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
-						 <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
-					slew-rate = <3>;
-					drive-push-pull;
-					bias-disable;
-				};
-				pins2{
-					pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
-					slew-rate = <3>;
-					drive-open-drain;
-					bias-disable;
-				};
-			};
-
-			sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
-						 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
-						 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
-						 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
-						 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
-						 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
-				};
-			};
-
-			sdmmc1_dir_pins_a: sdmmc1-dir-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
-						 <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
-						 <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
-					slew-rate = <3>;
-					drive-push-pull;
-					bias-pull-up;
-				};
-				pins2{
-					pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
-					bias-pull-up;
-				};
-			};
-
-			sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
-				pins {
-					pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
-						 <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
-						 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
-						 <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
-				};
-			};
-
-			usart1_pins: usart1-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */
-					bias-disable;
-				};
-			};
-
-			usart2_pins: usart2-0 {
-				pins1 {
-					pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <0>;
-				};
-				pins2 {
-					pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
-					bias-disable;
-				};
-			};
-
-			usbotg_hs_pins_a: usbotg-hs-0 {
-				pins {
-					pinmux = <STM32_PINMUX('H', 4, AF10)>,	/* ULPI_NXT */
-							 <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
-							 <STM32_PINMUX('C', 0, AF10)>,	/* ULPI_STP> */
-							 <STM32_PINMUX('A', 5, AF10)>,	/* ULPI_CK> */
-							 <STM32_PINMUX('A', 3, AF10)>,	/* ULPI_D0> */
-							 <STM32_PINMUX('B', 0, AF10)>,	/* ULPI_D1> */
-							 <STM32_PINMUX('B', 1, AF10)>,	/* ULPI_D2> */
-							 <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
-							 <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
-							 <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
-							 <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
-							 <STM32_PINMUX('B', 5, AF10)>;	/* ULPI_D7> */
-					bias-disable;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 4ebffb0a45a3..f30796f7adf3 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -135,6 +135,22 @@
 			clocks = <&rcc USART2_CK>;
 		};
 
+		usart3: serial@40004800 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40004800 0x400>;
+			interrupts = <39>;
+			status = "disabled";
+			clocks = <&rcc USART3_CK>;
+		};
+
+		uart4: serial@40004c00 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40004c00 0x400>;
+			interrupts = <52>;
+			status = "disabled";
+			clocks = <&rcc UART4_CK>;
+		};
+
 		i2c1: i2c@40005400 {
 			compatible = "st,stm32f7-i2c";
 			#address-cells = <1>;
@@ -159,7 +175,7 @@
 			status = "disabled";
 		};
 
-		i2c3: i2c@40005C00 {
+		i2c3: i2c@40005c00 {
 			compatible = "st,stm32f7-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -359,7 +375,6 @@
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x52007000 0x1000>;
 			interrupts = <49>;
-			interrupt-names	= "cmd_irq";
 			clocks = <&rcc SDMMC1_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
@@ -368,6 +383,20 @@
 			max-frequency = <120000000>;
 		};
 
+		sdmmc2: mmc@48022400 {
+			compatible = "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x10153180>;
+			reg = <0x48022400 0x400>;
+			interrupts = <124>;
+			clocks = <&rcc SDMMC2_CK>;
+			clock-names = "apb_pclk";
+			resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <120000000>;
+			status = "disabled";
+		};
+
 		exti: interrupt-controller@58000000 {
 			compatible = "st,stm32h7-exti";
 			interrupt-controller;
@@ -392,7 +421,7 @@
 			status = "disabled";
 		};
 
-		i2c4: i2c@58001C00 {
+		i2c4: i2c@58001c00 {
 			compatible = "st,stm32f7-i2c";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -454,8 +483,6 @@
 		};
 
 		lptimer4: timer@58002c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-lptimer";
 			reg = <0x58002c00 0x400>;
 			clocks = <&rcc LPTIM4_CK>;
@@ -470,8 +497,6 @@
 		};
 
 		lptimer5: timer@58003000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-lptimer";
 			reg = <0x58003000 0x400>;
 			clocks = <&rcc LPTIM5_CK>;
@@ -555,6 +580,147 @@
 			snps,pbl = <8>;
 			status = "disabled";
 		};
+
+		pinctrl: pinctrl@58020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32h743-pinctrl";
+			ranges = <0 0x58020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
+
+			gpioa: gpio@58020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc GPIOA_CK>;
+				st,bank-name = "GPIOA";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@58020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc GPIOB_CK>;
+				st,bank-name = "GPIOB";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@58020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc GPIOC_CK>;
+				st,bank-name = "GPIOC";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@58020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc GPIOD_CK>;
+				st,bank-name = "GPIOD";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@58021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc GPIOE_CK>;
+				st,bank-name = "GPIOE";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@58021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc GPIOF_CK>;
+				st,bank-name = "GPIOF";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@58021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc GPIOG_CK>;
+				st,bank-name = "GPIOG";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@58021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc GPIOH_CK>;
+				st,bank-name = "GPIOH";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			gpioi: gpio@58022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc GPIOI_CK>;
+				st,bank-name = "GPIOI";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			gpioj: gpio@58022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc GPIOJ_CK>;
+				st,bank-name = "GPIOJ";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 144 16>;
+			};
+
+			gpiok: gpio@58022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc GPIOK_CK>;
+				st,bank-name = "GPIOK";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ngpios = <8>;
+				gpio-ranges = <&pinctrl 0 160 8>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts
index e446d311c520..2b452883a708 100644
--- a/arch/arm/boot/dts/stm32h743i-disco.dts
+++ b/arch/arm/boot/dts/stm32h743i-disco.dts
@@ -42,7 +42,7 @@
 
 /dts-v1/;
 #include "stm32h743.dtsi"
-#include "stm32h743-pinctrl.dtsi"
+#include "stm32h7-pinctrl.dtsi"
 
 / {
 	model = "STMicroelectronics STM32H743i-Discovery board";
@@ -77,10 +77,10 @@
 
 &mac {
 	status = "disabled";
-	pinctrl-0	= <&ethernet_rmii>;
-	pinctrl-names	= "default";
-	phy-mode	= "rmii";
-	phy-handle	= <&phy0>;
+	pinctrl-0 = <&ethernet_rmii>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
 
 	mdio0 {
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
index 8f398178f5e5..5c5d8059bdc7 100644
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -42,7 +42,7 @@
 
 /dts-v1/;
 #include "stm32h743.dtsi"
-#include "stm32h743-pinctrl.dtsi"
+#include "stm32h7-pinctrl.dtsi"
 
 / {
 	model = "STMicroelectronics STM32H743i-EVAL board";
@@ -115,10 +115,10 @@
 
 &mac {
 	status = "disabled";
-	pinctrl-0	= <&ethernet_rmii>;
-	pinctrl-names	= "default";
-	phy-mode	= "rmii";
-	phy-handle	= <&phy0>;
+	pinctrl-0 = <&ethernet_rmii>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
 
 	mdio0 {
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/stm32h750.dtsi b/arch/arm/boot/dts/stm32h750.dtsi
new file mode 100644
index 000000000000..41e3b1e3a874
--- /dev/null
+++ b/arch/arm/boot/dts/stm32h750.dtsi
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/* Copyright (C) STMicroelectronics 2021 - All Rights Reserved */
+
+#include "stm32h743.dtsi"
+
+
diff --git a/arch/arm/boot/dts/stm32h750i-art-pi.dts b/arch/arm/boot/dts/stm32h750i-art-pi.dts
new file mode 100644
index 000000000000..f3e70d3b65ac
--- /dev/null
+++ b/arch/arm/boot/dts/stm32h750i-art-pi.dts
@@ -0,0 +1,229 @@
+/*
+ * Copyright 2021 - Dillon Min <dillon.minfei@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * For art-pi board resources, you can refer to link:
+ * 	https://art-pi.gitee.io/website/
+ */
+
+/dts-v1/;
+#include "stm32h750.dtsi"
+#include "stm32h7-pinctrl.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "RT-Thread STM32H750i-ART-PI board";
+	compatible = "st,stm32h750i-art-pi", "st,stm32h750";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:2000000n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x2000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			no-map;
+			size = <0x100000>;
+			linux,dma-default;
+		};
+	};
+
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-red {
+			gpios = <&gpioi 8 0>;
+		};
+		led-green {
+			gpios = <&gpioc 15 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	v3v3: regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	wlan_pwr: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&mac {
+	status = "disabled";
+	pinctrl-0 = <&ethernet_rmii>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+	broken-cd;
+	non-removable;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&wlan_pwr>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpioa 4 GPIO_ACTIVE_LOW>;
+	dmas = <&dmamux1 37 0x400 0x05>,
+	       <&dmamux1 38 0x400 0x05>;
+	dma-names = "rx", "tx";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+
+		partition@0 {
+			label = "root filesystem";
+			reg = <0 0x1000000>;
+		};
+	};
+};
+
+&usart2 {
+	pinctrl-0 = <&usart2_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&usart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usart3_pins>;
+	dmas = <&dmamux1 45 0x400 0x05>,
+	       <&dmamux1 46 0x400 0x05>;
+	dma-names = "rx", "tx";
+	st,hw-flow-ctrl;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		host-wakeup-gpios = <&gpioc 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpioi 11 GPIO_ACTIVE_HIGH>;
+		max-speed = <115200>;
+	};
+};
+
+&uart4 {
+	pinctrl-0 = <&uart4_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+
diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
new file mode 100644
index 000000000000..27e0c3826789
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com>
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+	adc1_usb_cc_pins_a: adc1-usb-cc-pins-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+				 <STM32_PINMUX('A', 3, ANALOG)>; /* ADC1 in12 */
+		};
+	};
+
+	i2c1_pins_a: i2c1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+				 <STM32_PINMUX('E', 8, AF5)>; /* I2C1_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c1_sleep_pins_a: i2c1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+				 <STM32_PINMUX('E', 8, ANALOG)>; /* I2C1_SDA */
+		};
+	};
+
+	i2c5_pins_a: i2c5-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */
+				 <STM32_PINMUX('H', 6, AF4)>; /* I2C5_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c5_sleep_pins_a: i2c5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */
+				 <STM32_PINMUX('H', 6, ANALOG)>; /* I2C5_SDA */
+		};
+	};
+
+	mcp23017_pins_a: mcp23017-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 12, GPIO)>;
+			bias-pull-up;
+		};
+	};
+
+	pwm3_pins_a: pwm3-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 1, AF2)>; /* TIM3_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm3_sleep_pins_a: pwm3-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 1, ANALOG)>; /* TIM3_CH4 */
+		};
+	};
+
+	pwm4_pins_a: pwm4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm4_sleep_pins_a: pwm4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */
+		};
+	};
+
+	pwm8_pins_a: pwm8-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 5, AF3)>; /* TIM8_CH3 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm8_sleep_pins_a: pwm8-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 5, ANALOG)>; /* TIM8_CH3 */
+		};
+	};
+
+	pwm14_pins_a: pwm14-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 9, AF9)>; /* TIM14_CH1 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm14_sleep_pins_a: pwm14-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 9, ANALOG)>; /* TIM14_CH1 */
+		};
+	};
+
+	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	sdmmc1_clk_pins_a: sdmmc1-clk-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF10)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+				 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+		};
+	};
+
+	sdmmc2_clk_pins_a: sdmmc2-clk-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	spi5_pins_a: spi5-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 7, AF6)>, /* SPI5_SCK */
+				 <STM32_PINMUX('H', 3, AF5)>; /* SPI5_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 8, AF5)>; /* SPI5_MISO */
+			bias-disable;
+		};
+	};
+
+	spi5_sleep_pins_a: spi5-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 7, ANALOG)>, /* SPI5_SCK */
+				 <STM32_PINMUX('A', 8, ANALOG)>, /* SPI5_MISO */
+				 <STM32_PINMUX('H', 3, ANALOG)>; /* SPI5_MOSI */
+		};
+	};
+
+	stm32g0_intn_pins_a: stm32g0-intn-0 {
+		pins {
+			pinmux = <STM32_PINMUX('I', 2, GPIO)>;
+			bias-pull-up;
+		};
+	};
+
+	uart4_pins_a: uart4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_idle_pins_a: uart4-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 6, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_sleep_pins_a: uart4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 6, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('D', 8, ANALOG)>; /* UART4_RX */
+		};
+	};
+
+	uart8_pins_a: uart8-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */
+			bias-pull-up;
+		};
+	};
+
+	uart8_idle_pins_a: uart8-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, ANALOG)>; /* UART8_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */
+			bias-pull-up;
+		};
+	};
+
+	uart8_sleep_pins_a: uart8-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 1, ANALOG)>, /* UART8_TX */
+				 <STM32_PINMUX('F', 9, ANALOG)>; /* UART8_RX */
+		};
+	};
+
+	usart1_pins_a: usart1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */
+				 <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 0, AF4)>, /* USART1_RX */
+				 <STM32_PINMUX('A', 7, AF7)>; /* USART1_CTS_NSS */
+			bias-pull-up;
+		};
+	};
+
+	usart1_idle_pins_a: usart1-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* USART1_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('B', 0, AF4)>; /* USART1_RX */
+			bias-pull-up;
+		};
+	};
+
+	usart1_sleep_pins_a: usart1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* USART1_RTS */
+				 <STM32_PINMUX('A', 7, ANALOG)>, /* USART1_CTS_NSS */
+				 <STM32_PINMUX('B', 0, ANALOG)>; /* USART1_RX */
+		};
+	};
+
+	usart2_pins_a: usart2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 12, AF1)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 15, AF1)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 11, AF2)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart2_idle_pins_a: usart2-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 15, AF1)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_sleep_pins_a: usart2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 15, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
new file mode 100644
index 000000000000..d163c267e34c
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp131.dtsi
@@ -0,0 +1,1510 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp13-clks.h>
+#include <dt-bindings/reset/stm32mp13-resets.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+		interrupt-parent = <&intc>;
+	};
+
+	firmware {
+		optee {
+			method = "smc";
+			compatible = "linaro,optee-tz";
+		};
+
+		scmi: scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+			shmem = <&scmi_shm>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	intc: interrupt-controller@a0021000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xa0021000 0x1000>,
+		      <0xa0022000 0x2000>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&intc>;
+		always-on;
+	};
+
+	/* PWR 1v1, 1v8 and 3v3 regulators defined as fixed, waiting for SCMI */
+	reg11: reg11 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg11";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+	};
+
+	reg18: reg18 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	usb33: usb33 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb33";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+
+		scmi_sram: sram@2ffff000 {
+			compatible = "mmio-sram";
+			reg = <0x2ffff000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x2ffff000 0x1000>;
+
+			scmi_shm: scmi-sram@0 {
+				compatible = "arm,scmi-shmem";
+				reg = <0 0x80>;
+			};
+		};
+
+		timers2: timer@40000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000000 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM2_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 18 0x400 0x1>,
+			       <&dmamux1 19 0x400 0x1>,
+			       <&dmamux1 20 0x400 0x1>,
+			       <&dmamux1 21 0x400 0x1>,
+			       <&dmamux1 22 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4", "up";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@1 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <1>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers3: timer@40001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001000 0x400>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM3_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 23 0x400 0x1>,
+			       <&dmamux1 24 0x400 0x1>,
+			       <&dmamux1 25 0x400 0x1>,
+			       <&dmamux1 26 0x400 0x1>,
+			       <&dmamux1 27 0x400 0x1>,
+			       <&dmamux1 28 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@2 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <2>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers4: timer@40002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40002000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM4_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 29 0x400 0x1>,
+			       <&dmamux1 30 0x400 0x1>,
+			       <&dmamux1 31 0x400 0x1>,
+			       <&dmamux1 32 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "up";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@3 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <3>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers5: timer@40003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40003000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM5_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 55 0x400 0x1>,
+			       <&dmamux1 56 0x400 0x1>,
+			       <&dmamux1 57 0x400 0x1>,
+			       <&dmamux1 58 0x400 0x1>,
+			       <&dmamux1 59 0x400 0x1>,
+			       <&dmamux1 60 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4", "up", "trig";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@4 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <4>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers6: timer@40004000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40004000 0x400>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM6_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 69 0x400 0x1>;
+			dma-names = "up";
+			status = "disabled";
+
+			timer@5 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <5>;
+				status = "disabled";
+			};
+		};
+
+		timers7: timer@40005000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40005000 0x400>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM7_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 70 0x400 0x1>;
+			dma-names = "up";
+			status = "disabled";
+
+			timer@6 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <6>;
+				status = "disabled";
+			};
+		};
+
+		lptimer1: timer@40009000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x40009000 0x400>;
+			interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LPTIM1_K>;
+			clock-names = "mux";
+			wakeup-source;
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@0 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-lptimer-counter";
+				status = "disabled";
+			};
+
+			timer {
+				compatible = "st,stm32-lptimer-timer";
+				status = "disabled";
+			};
+		};
+
+		i2s2: audio-controller@4000b000 {
+			compatible = "st,stm32h7-i2s";
+			reg = <0x4000b000 0x400>;
+			#sound-dai-cells = <0>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 39 0x400 0x01>,
+			       <&dmamux1 40 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi2: spi@4000b000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000b000 0x400>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI2_K>;
+			resets = <&rcc SPI2_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 39 0x400 0x01>,
+			       <&dmamux1 40 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s3: audio-controller@4000c000 {
+			compatible = "st,stm32h7-i2s";
+			reg = <0x4000c000 0x400>;
+			#sound-dai-cells = <0>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 61 0x400 0x01>,
+			       <&dmamux1 62 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi3: spi@4000c000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000c000 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI3_K>;
+			resets = <&rcc SPI3_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 61 0x400 0x01>,
+			       <&dmamux1 62 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spdifrx: audio-controller@4000d000 {
+			compatible = "st,stm32h7-spdifrx";
+			reg = <0x4000d000 0x400>;
+			#sound-dai-cells = <0>;
+			clocks = <&rcc SPDIF_K>;
+			clock-names = "kclk";
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 93 0x400 0x01>,
+			       <&dmamux1 94 0x400 0x01>;
+			dma-names = "rx", "rx-ctrl";
+			status = "disabled";
+		};
+
+		usart3: serial@4000f000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4000f000 0x400>;
+			interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART3_K>;
+			resets = <&rcc USART3_R>;
+			wakeup-source;
+			dmas = <&dmamux1 45 0x400 0x5>,
+			       <&dmamux1 46 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart4: serial@40010000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40010000 0x400>;
+			interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART4_K>;
+			resets = <&rcc UART4_R>;
+			wakeup-source;
+			dmas = <&dmamux1 63 0x400 0x5>,
+			       <&dmamux1 64 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart5: serial@40011000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40011000 0x400>;
+			interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART5_K>;
+			resets = <&rcc UART5_R>;
+			wakeup-source;
+			dmas = <&dmamux1 65 0x400 0x5>,
+			       <&dmamux1 66 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c1: i2c@40012000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x40012000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C1_K>;
+			resets = <&rcc I2C1_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 33 0x400 0x1>,
+			       <&dmamux1 34 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x1>;
+			i2c-analog-filter;
+			status = "disabled";
+		};
+
+		i2c2: i2c@40013000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x40013000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C2_K>;
+			resets = <&rcc I2C2_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 35 0x400 0x1>,
+			       <&dmamux1 36 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x2>;
+			i2c-analog-filter;
+			status = "disabled";
+		};
+
+		uart7: serial@40018000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40018000 0x400>;
+			interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART7_K>;
+			resets = <&rcc UART7_R>;
+			wakeup-source;
+			dmas = <&dmamux1 79 0x400 0x5>,
+			       <&dmamux1 80 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart8: serial@40019000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40019000 0x400>;
+			interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART8_K>;
+			resets = <&rcc UART8_R>;
+			wakeup-source;
+			dmas = <&dmamux1 81 0x400 0x5>,
+			       <&dmamux1 82 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		timers1: timer@44000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x44000000 0x400>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "brk", "up", "trg-com", "cc";
+			clocks = <&rcc TIM1_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 11 0x400 0x1>,
+			       <&dmamux1 12 0x400 0x1>,
+			       <&dmamux1 13 0x400 0x1>,
+			       <&dmamux1 14 0x400 0x1>,
+			       <&dmamux1 15 0x400 0x1>,
+			       <&dmamux1 16 0x400 0x1>,
+			       <&dmamux1 17 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4",
+				    "up", "trig", "com";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@0 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		timers8: timer@44001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x44001000 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "brk", "up", "trg-com", "cc";
+			clocks = <&rcc TIM8_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 47 0x400 0x1>,
+			       <&dmamux1 48 0x400 0x1>,
+			       <&dmamux1 49 0x400 0x1>,
+			       <&dmamux1 50 0x400 0x1>,
+			       <&dmamux1 51 0x400 0x1>,
+			       <&dmamux1 52 0x400 0x1>,
+			       <&dmamux1 53 0x400 0x1>;
+			dma-names = "ch1", "ch2", "ch3", "ch4",
+				    "up", "trig", "com";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@7 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <7>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-timer-counter";
+				status = "disabled";
+			};
+		};
+
+		usart6: serial@44003000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x44003000 0x400>;
+			interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART6_K>;
+			resets = <&rcc USART6_R>;
+			wakeup-source;
+			dmas = <&dmamux1 71 0x400 0x5>,
+			       <&dmamux1 72 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s1: audio-controller@44004000 {
+			compatible = "st,stm32h7-i2s";
+			reg = <0x44004000 0x400>;
+			#sound-dai-cells = <0>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 37 0x400 0x01>,
+			       <&dmamux1 38 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi1: spi@44004000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x44004000 0x400>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI1_K>;
+			resets = <&rcc SPI1_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 37 0x400 0x01>,
+			       <&dmamux1 38 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sai1: sai@4400a000 {
+			compatible = "st,stm32h7-sai";
+			reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
+			ranges = <0 0x4400a000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc SAI1_R>;
+			status = "disabled";
+
+			sai1a: audio-controller@4400a004 {
+				compatible = "st,stm32-sai-sub-a";
+				reg = <0x4 0x20>;
+				#sound-dai-cells = <0>;
+				clocks = <&rcc SAI1_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 87 0x400 0x01>;
+				status = "disabled";
+			};
+
+			sai1b: audio-controller@4400a024 {
+				compatible = "st,stm32-sai-sub-b";
+				reg = <0x24 0x20>;
+				#sound-dai-cells = <0>;
+				clocks = <&rcc SAI1_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 88 0x400 0x01>;
+				status = "disabled";
+			};
+		};
+
+		sai2: sai@4400b000 {
+			compatible = "st,stm32h7-sai";
+			reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
+			ranges = <0 0x4400b000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rcc SAI2_R>;
+			status = "disabled";
+
+			sai2a: audio-controller@4400b004 {
+				compatible = "st,stm32-sai-sub-a";
+				reg = <0x4 0x20>;
+				#sound-dai-cells = <0>;
+				clocks = <&rcc SAI2_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 89 0x400 0x01>;
+				status = "disabled";
+			};
+
+			sai2b: audio-controller@4400b024 {
+				compatible = "st,stm32-sai-sub-b";
+				reg = <0x24 0x20>;
+				#sound-dai-cells = <0>;
+				clocks = <&rcc SAI2_K>;
+				clock-names = "sai_ck";
+				dmas = <&dmamux1 90 0x400 0x01>;
+				status = "disabled";
+			};
+		};
+
+		dfsdm: dfsdm@4400d000 {
+			compatible = "st,stm32mp1-dfsdm";
+			reg = <0x4400d000 0x800>;
+			clocks = <&rcc DFSDM_K>;
+			clock-names = "dfsdm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			dfsdm0: filter@0 {
+				compatible = "st,stm32-dfsdm-adc";
+				reg = <0>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 101 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm1: filter@1 {
+				compatible = "st,stm32-dfsdm-adc";
+				reg = <1>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 102 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+		};
+
+		dma1: dma-controller@48000000 {
+			compatible = "st,stm32-dma";
+			reg = <0x48000000 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc DMA1>;
+			resets = <&rcc DMA1_R>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+		};
+
+		dma2: dma-controller@48001000 {
+			compatible = "st,stm32-dma";
+			reg = <0x48001000 0x400>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc DMA2>;
+			resets = <&rcc DMA2_R>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+		};
+
+		dmamux1: dma-router@48002000 {
+			compatible = "st,stm32h7-dmamux";
+			reg = <0x48002000 0x40>;
+			clocks = <&rcc DMAMUX1>;
+			resets = <&rcc DMAMUX1_R>;
+			#dma-cells = <3>;
+			dma-masters = <&dma1 &dma2>;
+			dma-requests = <128>;
+			dma-channels = <16>;
+		};
+
+		adc_2: adc@48004000 {
+			compatible = "st,stm32mp13-adc-core";
+			reg = <0x48004000 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc ADC2>, <&rcc ADC2_K>;
+			clock-names = "bus", "adc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc2: adc@0 {
+				compatible = "st,stm32mp13-adc";
+				#io-channel-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0>;
+				interrupt-parent = <&adc_2>;
+				interrupts = <0>;
+				dmas = <&dmamux1 10 0x400 0x80000001>;
+				dma-names = "rx";
+				status = "disabled";
+
+				channel@13 {
+					reg = <13>;
+					label = "vrefint";
+				};
+				channel@14 {
+					reg = <14>;
+					label = "vddcore";
+				};
+				channel@16 {
+					reg = <16>;
+					label = "vddcpu";
+				};
+				channel@17 {
+					reg = <17>;
+					label = "vddq_ddr";
+				};
+			};
+		};
+
+		usbotg_hs: usb@49000000 {
+			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
+			reg = <0x49000000 0x40000>;
+			clocks = <&rcc USBO_K>;
+			clock-names = "otg";
+			resets = <&rcc USBO_R>;
+			reset-names = "dwc2";
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			g-rx-fifo-size = <512>;
+			g-np-tx-fifo-size = <32>;
+			g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
+			dr_mode = "otg";
+			otg-rev = <0x200>;
+			usb33d-supply = <&usb33>;
+			status = "disabled";
+		};
+
+		usart1: serial@4c000000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4c000000 0x400>;
+			interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART1_K>;
+			resets = <&rcc USART1_R>;
+			wakeup-source;
+			dmas = <&dmamux1 41 0x400 0x5>,
+			       <&dmamux1 42 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		usart2: serial@4c001000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4c001000 0x400>;
+			interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART2_K>;
+			resets = <&rcc USART2_R>;
+			wakeup-source;
+			dmas = <&dmamux1 43 0x400 0x5>,
+			       <&dmamux1 44 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2s4: audio-controller@4c002000 {
+			compatible = "st,stm32h7-i2s";
+			reg = <0x4c002000 0x400>;
+			#sound-dai-cells = <0>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmamux1 83 0x400 0x01>,
+			       <&dmamux1 84 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi4: spi@4c002000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4c002000 0x400>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI4_K>;
+			resets = <&rcc SPI4_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 83 0x400 0x01>,
+			       <&dmamux1 84 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi5: spi@4c003000 {
+			compatible = "st,stm32h7-spi";
+			reg = <0x4c003000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI5_K>;
+			resets = <&rcc SPI5_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 85 0x400 0x01>,
+			       <&dmamux1 86 0x400 0x01>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c3: i2c@4c004000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x4c004000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C3_K>;
+			resets = <&rcc I2C3_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 73 0x400 0x1>,
+			       <&dmamux1 74 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x4>;
+			i2c-analog-filter;
+			status = "disabled";
+		};
+
+		i2c4: i2c@4c005000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x4c005000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C4_K>;
+			resets = <&rcc I2C4_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 75 0x400 0x1>,
+			       <&dmamux1 76 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x8>;
+			i2c-analog-filter;
+			status = "disabled";
+		};
+
+		i2c5: i2c@4c006000 {
+			compatible = "st,stm32mp13-i2c";
+			reg = <0x4c006000 0x400>;
+			interrupt-names = "event", "error";
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc I2C5_K>;
+			resets = <&rcc I2C5_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dmas = <&dmamux1 115 0x400 0x1>,
+			       <&dmamux1 116 0x400 0x1>;
+			dma-names = "rx", "tx";
+			st,syscfg-fmp = <&syscfg 0x4 0x10>;
+			i2c-analog-filter;
+			status = "disabled";
+		};
+
+		timers12: timer@4c007000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x4c007000 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM12_K>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@11 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <11>;
+				status = "disabled";
+			};
+		};
+
+		timers13: timer@4c008000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x4c008000 0x400>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM13_K>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@12 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <12>;
+				status = "disabled";
+			};
+		};
+
+		timers14: timer@4c009000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x4c009000 0x400>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM14_K>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@13 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <13>;
+				status = "disabled";
+			};
+		};
+
+		timers15: timer@4c00a000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x4c00a000 0x400>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM15_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 105 0x400 0x1>,
+			       <&dmamux1 106 0x400 0x1>,
+			       <&dmamux1 107 0x400 0x1>,
+			       <&dmamux1 108 0x400 0x1>;
+			dma-names = "ch1", "up", "trig", "com";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@14 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <14>;
+				status = "disabled";
+			};
+		};
+
+		timers16: timer@4c00b000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x4c00b000 0x400>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM16_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 109 0x400 0x1>,
+			       <&dmamux1 110 0x400 0x1>;
+			dma-names = "ch1", "up";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@15 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <15>;
+				status = "disabled";
+			};
+		};
+
+		timers17: timer@4c00c000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x4c00c000 0x400>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
+			clocks = <&rcc TIM17_K>;
+			clock-names = "int";
+			dmas = <&dmamux1 111 0x400 0x1>,
+			       <&dmamux1 112 0x400 0x1>;
+			dma-names = "ch1", "up";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer@16 {
+				compatible = "st,stm32h7-timer-trigger";
+				reg = <16>;
+				status = "disabled";
+			};
+		};
+
+		rcc: rcc@50000000 {
+			compatible = "st,stm32mp13-rcc", "syscon";
+			reg = <0x50000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clock-names = "hse", "hsi", "csi", "lse", "lsi";
+			clocks = <&scmi_clk CK_SCMI_HSE>,
+				 <&scmi_clk CK_SCMI_HSI>,
+				 <&scmi_clk CK_SCMI_CSI>,
+				 <&scmi_clk CK_SCMI_LSE>,
+				 <&scmi_clk CK_SCMI_LSI>;
+		};
+
+		exti: interrupt-controller@5000d000 {
+			compatible = "st,stm32mp13-exti", "syscon";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x5000d000 0x400>;
+		};
+
+		syscfg: syscon@50020000 {
+			compatible = "st,stm32mp157-syscfg", "syscon";
+			reg = <0x50020000 0x400>;
+			clocks = <&rcc SYSCFG>;
+		};
+
+		lptimer2: timer@50021000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x50021000 0x400>;
+			interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LPTIM2_K>;
+			clock-names = "mux";
+			wakeup-source;
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@1 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <1>;
+				status = "disabled";
+			};
+
+			counter {
+				compatible = "st,stm32-lptimer-counter";
+				status = "disabled";
+			};
+
+			timer {
+				compatible = "st,stm32-lptimer-timer";
+				status = "disabled";
+			};
+		};
+
+		lptimer3: timer@50022000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-lptimer";
+			reg = <0x50022000 0x400>;
+			interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LPTIM3_K>;
+			clock-names = "mux";
+			wakeup-source;
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			trigger@2 {
+				compatible = "st,stm32-lptimer-trigger";
+				reg = <2>;
+				status = "disabled";
+			};
+
+			timer {
+				compatible = "st,stm32-lptimer-timer";
+				status = "disabled";
+			};
+		};
+
+		lptimer4: timer@50023000 {
+			compatible = "st,stm32-lptimer";
+			reg = <0x50023000 0x400>;
+			interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LPTIM4_K>;
+			clock-names = "mux";
+			wakeup-source;
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer {
+				compatible = "st,stm32-lptimer-timer";
+				status = "disabled";
+			};
+		};
+
+		lptimer5: timer@50024000 {
+			compatible = "st,stm32-lptimer";
+			reg = <0x50024000 0x400>;
+			interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc LPTIM5_K>;
+			clock-names = "mux";
+			wakeup-source;
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm-lp";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			timer {
+				compatible = "st,stm32-lptimer-timer";
+				status = "disabled";
+			};
+		};
+
+		mdma: dma-controller@58000000 {
+			compatible = "st,stm32h7-mdma";
+			reg = <0x58000000 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc MDMA>;
+			#dma-cells = <5>;
+			dma-channels = <32>;
+			dma-requests = <48>;
+		};
+
+		fmc: memory-controller@58002000 {
+			compatible = "st,stm32mp1-fmc2-ebi";
+			reg = <0x58002000 0x1000>;
+			ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */
+				 <1 0 0x64000000 0x04000000>, /* EBI CS 2 */
+				 <2 0 0x68000000 0x04000000>, /* EBI CS 3 */
+				 <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */
+				 <4 0 0x80000000 0x10000000>; /* NAND */
+			#address-cells = <2>;
+			#size-cells = <1>;
+			clocks = <&rcc FMC_K>;
+			resets = <&rcc FMC_R>;
+			status = "disabled";
+
+			nand-controller@4,0 {
+				compatible = "st,stm32mp1-fmc2-nfc";
+				reg = <4 0x00000000 0x1000>,
+				      <4 0x08010000 0x1000>,
+				      <4 0x08020000 0x1000>,
+				      <4 0x01000000 0x1000>,
+				      <4 0x09010000 0x1000>,
+				      <4 0x09020000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>,
+				       <&mdma 24 0x2 0x12000a08 0x0 0x0>,
+				       <&mdma 25 0x2 0x12000a0a 0x0 0x0>;
+				dma-names = "tx", "rx", "ecc";
+				status = "disabled";
+			};
+		};
+
+		qspi: spi@58003000 {
+			compatible = "st,stm32f469-qspi";
+			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+			reg-names = "qspi", "qspi_mm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>,
+			       <&mdma 26 0x2 0x10100008 0x0 0x0>;
+			dma-names = "tx", "rx";
+			clocks = <&rcc QSPI_K>;
+			resets = <&rcc QSPI_R>;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@58005000 {
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x20253180>;
+			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SDMMC1_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC1_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <130000000>;
+			status = "disabled";
+		};
+
+		sdmmc2: mmc@58007000 {
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x20253180>;
+			reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SDMMC2_K>;
+			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC2_R>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <130000000>;
+			status = "disabled";
+		};
+
+		usbh_ohci: usb@5800c000 {
+			compatible = "generic-ohci";
+			reg = <0x5800c000 0x1000>;
+			clocks = <&usbphyc>, <&rcc USBH>;
+			resets = <&rcc USBH_R>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		usbh_ehci: usb@5800d000 {
+			compatible = "generic-ehci";
+			reg = <0x5800d000 0x1000>;
+			clocks = <&usbphyc>, <&rcc USBH>;
+			resets = <&rcc USBH_R>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			companion = <&usbh_ohci>;
+			status = "disabled";
+		};
+
+		iwdg2: watchdog@5a002000 {
+			compatible = "st,stm32mp1-iwdg";
+			reg = <0x5a002000 0x400>;
+			clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+			clock-names = "pclk", "lsi";
+			status = "disabled";
+		};
+
+		usbphyc: usbphyc@5a006000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <0>;
+			compatible = "st,stm32mp1-usbphyc";
+			reg = <0x5a006000 0x1000>;
+			clocks = <&rcc USBPHY_K>;
+			resets = <&rcc USBPHY_R>;
+			vdda1v1-supply = <&reg11>;
+			vdda1v8-supply = <&reg18>;
+			status = "disabled";
+
+			usbphyc_port0: usb-phy@0 {
+				#phy-cells = <0>;
+				reg = <0>;
+			};
+
+			usbphyc_port1: usb-phy@1 {
+				#phy-cells = <1>;
+				reg = <1>;
+			};
+		};
+
+		rtc: rtc@5c004000 {
+			compatible = "st,stm32mp1-rtc";
+			reg = <0x5c004000 0x400>;
+			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk CK_SCMI_RTCAPB>,
+				 <&scmi_clk CK_SCMI_RTC>;
+			clock-names = "pclk", "rtc_ck";
+			status = "disabled";
+		};
+
+		bsec: efuse@5c005000 {
+			compatible = "st,stm32mp13-bsec";
+			reg = <0x5c005000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			part_number_otp: part_number_otp@4 {
+				reg = <0x4 0x2>;
+				bits = <0 12>;
+			};
+			ts_cal1: calib@5c {
+				reg = <0x5c 0x2>;
+			};
+			ts_cal2: calib@5e {
+				reg = <0x5e 0x2>;
+			};
+		};
+
+		/*
+		 * Break node order to solve dependency probe issue between
+		 * pinctrl and exti.
+		 */
+		pinctrl: pinctrl@50002000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp135-pinctrl";
+			ranges = <0 0x50002000 0x8400>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
+
+			gpioa: gpio@50002000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc GPIOA>;
+				st,bank-name = "GPIOA";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@50003000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc GPIOB>;
+				st,bank-name = "GPIOB";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@50004000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc GPIOC>;
+				st,bank-name = "GPIOC";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@50005000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x400>;
+				clocks = <&rcc GPIOD>;
+				st,bank-name = "GPIOD";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@50006000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x400>;
+				clocks = <&rcc GPIOE>;
+				st,bank-name = "GPIOE";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@50007000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x400>;
+				clocks = <&rcc GPIOF>;
+				st,bank-name = "GPIOF";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@50008000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x400>;
+				clocks = <&rcc GPIOG>;
+				st,bank-name = "GPIOG";
+				ngpios = <16>;
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@50009000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x400>;
+				clocks = <&rcc GPIOH>;
+				st,bank-name = "GPIOH";
+				ngpios = <15>;
+				gpio-ranges = <&pinctrl 0 112 15>;
+			};
+
+			gpioi: gpio@5000a000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x400>;
+				clocks = <&rcc GPIOI>;
+				st,bank-name = "GPIOI";
+				ngpios = <8>;
+				gpio-ranges = <&pinctrl 0 128 8>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp133.dtsi b/arch/arm/boot/dts/stm32mp133.dtsi
new file mode 100644
index 000000000000..df451c3c2a26
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp133.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp131.dtsi"
+
+/ {
+	soc {
+		m_can1: can@4400e000 {
+			compatible = "bosch,m_can";
+			reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+			status = "disabled";
+		};
+
+		m_can2: can@4400f000 {
+			compatible = "bosch,m_can";
+			reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+			status = "disabled";
+		};
+
+		adc_1: adc@48003000 {
+			compatible = "st,stm32mp13-adc-core";
+			reg = <0x48003000 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc ADC1>, <&rcc ADC1_K>;
+			clock-names = "bus", "adc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc1: adc@0 {
+				compatible = "st,stm32mp13-adc";
+				#io-channel-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0>;
+				interrupt-parent = <&adc_1>;
+				interrupts = <0>;
+				dmas = <&dmamux1 9 0x400 0x80000001>;
+				dma-names = "rx";
+				status = "disabled";
+
+				channel@18 {
+					reg = <18>;
+					label = "vrefint";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp135.dtsi b/arch/arm/boot/dts/stm32mp135.dtsi
new file mode 100644
index 000000000000..abf2acd37b4e
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp135.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp133.dtsi"
+
+/ {
+	soc {
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
new file mode 100644
index 000000000000..f0900ca672b5
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "stm32mp135.dtsi"
+#include "stm32mp13xf.dtsi"
+#include "stm32mp13-pinctrl.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP135F-DK Discovery Board";
+	compatible = "st,stm32mp135f-dk", "st,stm32mp135";
+
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart1;
+		serial2 = &uart8;
+		serial3 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		optee@dd000000 {
+			reg = <0xdd000000 0x3000000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-user {
+			label = "User-PA13";
+			linux,code = <BTN_1>;
+			gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	v3v3_sw: v3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3_sw";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_adc: vdd-adc {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_adc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_sd: vdd-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_sd";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-always-on;
+	};
+
+	vdd_usb: vdd-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_usb";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&adc_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc1_usb_cc_pins_a>;
+	vdda-supply = <&vdd_adc>;
+	vref-supply = <&vdd_adc>;
+	status = "okay";
+	adc1: adc@0 {
+		status = "okay";
+		/*
+		 * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in6 & in12.
+		 * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+		 * 5 * (5.1 + 47kOhms) * 5pF => 1.3us.
+		 * Use arbitrary margin here (e.g. 5us).
+		 */
+		channel@6 {
+			reg = <6>;
+			st,min-sample-time-ns = <5000>;
+		};
+		channel@12 {
+			reg = <12>;
+			st,min-sample-time-ns = <5000>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <96>;
+	i2c-scl-falling-time-ns = <3>;
+	clock-frequency = <1000000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	mcp23017: pinctrl@21 {
+		compatible = "microchip,mcp23017";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpiog>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcp23017_pins_a>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		microchip,irq-mirror;
+	};
+
+	typec@53 {
+		compatible = "st,stm32g0-typec";
+		reg = <0x53>;
+		/* Alert pin on PI2 */
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpioi>;
+		/* Internal pull-up on PI2 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&stm32g0_intn_pins_a>;
+		firmware-name = "stm32g0-ucsi.mp135f-dk.fw";
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+
+			port {
+				con_usb_c_g0_ep: endpoint {
+					remote-endpoint = <&usbotg_hs_ep>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <170>;
+	i2c-scl-falling-time-ns = <5>;
+	clock-frequency = <400000>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpioh 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	status = "okay";
+};
+
+&spi5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi5_pins_a>;
+	pinctrl-1 = <&spi5_sleep_pins_a>;
+	status = "disabled";
+};
+
+&timers3 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm3_pins_a>;
+		pinctrl-1 = <&pwm3_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm4_pins_a>;
+		pinctrl-1 = <&pwm4_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@3 {
+		status = "okay";
+	};
+};
+
+&timers8 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm8_pins_a>;
+		pinctrl-1 = <&pwm8_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@7 {
+		status = "okay";
+	};
+};
+
+&timers14 {
+	status = "disabled";
+	pwm {
+		pinctrl-0 = <&pwm14_pins_a>;
+		pinctrl-1 = <&pwm14_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@13 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart8_pins_a>;
+	pinctrl-1 = <&uart8_sleep_pins_a>;
+	pinctrl-2 = <&uart8_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+};
+
+&usart1 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-1 = <&usart1_sleep_pins_a>;
+	pinctrl-2 = <&usart1_idle_pins_a>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Bluetooth */
+&usart2 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_a>;
+	pinctrl-1 = <&usart2_sleep_pins_a>;
+	pinctrl-2 = <&usart2_idle_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* onboard HUB */
+	hub@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		vdd-supply = <&v3v3_sw>;
+	};
+};
+
+&usbotg_hs {
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	usb-role-switch;
+	status = "okay";
+	port {
+		usbotg_hs_ep: endpoint {
+			remote-endpoint = <&con_usb_c_g0_ep>;
+		};
+	};
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	st,current-boost-microamp = <1000>;
+	st,decrease-hs-slew-rate;
+	st,tune-hs-dc-level = <2>;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <11>;
+	st,trim-hs-impedance = <2>;
+	st,tune-squelch-level = <1>;
+	st,enable-hs-rx-gain-eq;
+	st,no-hs-ftime-ctrl;
+	st,no-lsfs-sc;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	st,current-boost-microamp = <1000>;
+	st,decrease-hs-slew-rate;
+	st,tune-hs-dc-level = <2>;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <11>;
+	st,trim-hs-impedance = <2>;
+	st,tune-squelch-level = <1>;
+	st,enable-hs-rx-gain-eq;
+	st,no-hs-ftime-ctrl;
+	st,no-lsfs-sc;
+};
diff --git a/arch/arm/boot/dts/stm32mp13xc.dtsi b/arch/arm/boot/dts/stm32mp13xc.dtsi
new file mode 100644
index 000000000000..4d00e7592882
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp13xc.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+	soc {
+		cryp: crypto@54002000 {
+			compatible = "st,stm32mp1-cryp";
+			reg = <0x54002000 0x400>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc CRYP1>;
+			resets = <&rcc CRYP1_R>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp13xf.dtsi b/arch/arm/boot/dts/stm32mp13xf.dtsi
new file mode 100644
index 000000000000..4d00e7592882
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp13xf.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+	soc {
+		cryp: crypto@54002000 {
+			compatible = "st,stm32mp1-cryp";
+			reg = <0x54002000 0x400>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc CRYP1>;
+			resets = <&rcc CRYP1_R>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 7b4249ed1983..e86d989dd351 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -118,6 +118,76 @@
 		};
 	};
 
+	dcmi_pins_b: dcmi-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4,  AF13)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('C', 6,  AF13)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E', 1,  AF13)>,/* DCMI_D3 */
+				 <STM32_PINMUX('E', 11, AF13)>,/* DCMI_D4 */
+				 <STM32_PINMUX('D', 3,  AF13)>,/* DCMI_D5 */
+				 <STM32_PINMUX('E', 13, AF13)>,/* DCMI_D6 */
+				 <STM32_PINMUX('B', 9,  AF13)>;/* DCMI_D7 */
+			bias-disable;
+		};
+	};
+
+	dcmi_sleep_pins_b: dcmi-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4,  ANALOG)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('C', 6,  ANALOG)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E', 1,  ANALOG)>,/* DCMI_D3 */
+				 <STM32_PINMUX('E', 11, ANALOG)>,/* DCMI_D4 */
+				 <STM32_PINMUX('D', 3,  ANALOG)>,/* DCMI_D5 */
+				 <STM32_PINMUX('E', 13, ANALOG)>,/* DCMI_D6 */
+				 <STM32_PINMUX('B', 9,  ANALOG)>;/* DCMI_D7 */
+		};
+	};
+
+	dcmi_pins_c: dcmi-2 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4,  AF13)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('A', 9,  AF13)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+				 <STM32_PINMUX('E', 0, AF13)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E', 1, AF13)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  AF13)>,/* DCMI_D5 */
+				 <STM32_PINMUX('I', 6,  AF13)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 6,  AF13)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  AF13)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  AF13)>;/* DCMI_D9 */
+			bias-pull-up;
+		};
+	};
+
+	dcmi_sleep_pins_c: dcmi-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4,  ANALOG)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('A', 9,  ANALOG)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+				 <STM32_PINMUX('E', 0, ANALOG)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E', 1, ANALOG)>,/* DCMI_D3 */
+				 <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+				 <STM32_PINMUX('I', 4,  ANALOG)>,/* DCMI_D5 */
+				 <STM32_PINMUX('I', 6,  ANALOG)>,/* DCMI_D6 */
+				 <STM32_PINMUX('E', 6,  ANALOG)>,/* DCMI_D7 */
+				 <STM32_PINMUX('I', 1,  ANALOG)>,/* DCMI_D8 */
+				 <STM32_PINMUX('H', 7,  ANALOG)>;/* DCMI_D9 */
+		};
+	};
+
 	ethernet0_rgmii_pins_a: rgmii-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
@@ -305,6 +375,81 @@
 		};
 	};
 
+	ethernet0_rmii_pins_b: rmii-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 5, AF0)>, /* ETH1_CLK */
+				<STM32_PINMUX('C', 1, AF11)>, /* ETH1_MDC */
+				<STM32_PINMUX('G', 13, AF11)>, /* ETH1_TXD0 */
+				<STM32_PINMUX('G', 14, AF11)>; /* ETH1_TXD1 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH1_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('A', 7, AF11)>, /* ETH1_CRS_DV */
+				<STM32_PINMUX('C', 4, AF11)>, /* ETH1_RXD0 */
+				<STM32_PINMUX('C', 5, AF11)>; /* ETH1_RXD1 */
+			bias-disable;
+		};
+		pins4 {
+			pinmux = <STM32_PINMUX('B', 11, AF11)>; /* ETH1_TX_EN */
+		};
+	};
+
+	ethernet0_rmii_sleep_pins_b: rmii-sleep-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */
+				<STM32_PINMUX('A', 7, ANALOG)>, /* ETH1_CRS_DV */
+				<STM32_PINMUX('B', 5, ANALOG)>, /* ETH1_CLK */
+				<STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_TX_EN */
+				<STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */
+				<STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RXD0 */
+				<STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RXD1 */
+				<STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_TXD0 */
+				<STM32_PINMUX('G', 14, ANALOG)>; /* ETH1_TXD1 */
+		};
+	};
+
+	ethernet0_rmii_pins_c: rmii-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 1, AF11)>,  /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 2, AF11)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, AF11)>;  /* ETH1_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rmii_sleep_pins_c: rmii-sleep-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+				 <STM32_PINMUX('A', 2, ANALOG)>,  /* ETH1_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>,  /* ETH1_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+				 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
+		};
+	};
+
 	fmc_pins_a: fmc-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
@@ -815,6 +960,36 @@
 		};
 	};
 
+	mco1_pins_a: mco1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 13, AF2)>; /* MCO1 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	mco1_sleep_pins_a: mco1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 13, ANALOG)>; /* MCO1 */
+		};
+	};
+
+	mco2_pins_a: mco2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+	};
+
+	mco2_sleep_pins_a: mco2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */
+		};
+	};
+
 	m_can1_pins_a: m-can1-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
@@ -855,6 +1030,26 @@
 		};
 	};
 
+	m_can1_pins_c: m-can1-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	m_can1_sleep_pins_c: m_can1-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('H', 14, ANALOG)>; /* CAN1_RX */
+		};
+	};
+
 	m_can2_pins_a: m-can2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
@@ -894,6 +1089,21 @@
 		};
 	};
 
+	pwm1_pins_b: pwm1-1 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, AF1)>; /* TIM1_CH1 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm1_sleep_pins_b: pwm1-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, ANALOG)>; /* TIM1_CH1 */
+		};
+	};
+
 	pwm2_pins_a: pwm2-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
@@ -1051,7 +1261,7 @@
 	};
 
 	qspi_bk1_pins_a: qspi-bk1-0 {
-		pins1 {
+		pins {
 			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
 				 <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
 				 <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
@@ -1060,12 +1270,6 @@
 			drive-push-pull;
 			slew-rate = <1>;
 		};
-		pins2 {
-			pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
-			bias-pull-up;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
 	};
 
 	qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
@@ -1073,13 +1277,12 @@
 			pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
 				 <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
 				 <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
-				 <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
-				 <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+				 <STM32_PINMUX('F', 6, ANALOG)>; /* QSPI_BK1_IO3 */
 		};
 	};
 
 	qspi_bk2_pins_a: qspi-bk2-0 {
-		pins1 {
+		pins {
 			pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
 				 <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
 				 <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
@@ -1088,7 +1291,34 @@
 			drive-push-pull;
 			slew-rate = <1>;
 		};
-		pins2 {
+	};
+
+	qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
+				 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
+				 <STM32_PINMUX('G', 7, ANALOG)>; /* QSPI_BK2_IO3 */
+		};
+	};
+
+	qspi_cs1_pins_a: qspi-cs1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+			bias-pull-up;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	qspi_cs1_sleep_pins_a: qspi-cs1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+		};
+	};
+
+	qspi_cs2_pins_a: qspi-cs2-0 {
+		pins {
 			pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
 			bias-pull-up;
 			drive-push-pull;
@@ -1096,13 +1326,9 @@
 		};
 	};
 
-	qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+	qspi_cs2_sleep_pins_a: qspi-cs2-sleep-0 {
 		pins {
-			pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
-				 <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
-				 <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
-				 <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
-				 <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
 		};
 	};
 
@@ -1146,7 +1372,7 @@
 		};
 	};
 
-	sai2a_pins_c: sai2a-4 {
+	sai2a_pins_c: sai2a-2 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
 				 <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
@@ -1157,7 +1383,7 @@
 		};
 	};
 
-	sai2a_sleep_pins_c: sai2a-5 {
+	sai2a_sleep_pins_c: sai2a-sleep-2 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
 				 <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
@@ -1202,14 +1428,14 @@
 		};
 	};
 
-	sai2b_pins_c: sai2a-4 {
+	sai2b_pins_c: sai2b-2 {
 		pins1 {
 			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
 			bias-disable;
 		};
 	};
 
-	sai2b_sleep_pins_c: sai2a-sleep-5 {
+	sai2b_sleep_pins_c: sai2b-sleep-2 {
 		pins {
 			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
 		};
@@ -1654,17 +1880,47 @@
 		};
 	};
 
+	spi1_pins_b: spi1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
 	spi2_pins_a: spi2-0 {
 		pins1 {
-			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI1_SCK */
-				 <STM32_PINMUX('I', 3, AF5)>; /* SPI1_MOSI */
+			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
+				 <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
 			bias-disable;
 			drive-push-pull;
 			slew-rate = <1>;
 		};
 
 		pins2 {
-			pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI1_MISO */
+			pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
+			bias-disable;
+		};
+	};
+
+	spi2_pins_b: spi2-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('I', 1, AF5)>, /* SPI2_SCK */
+				 <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
 			bias-disable;
 		};
 	};
@@ -1685,7 +1941,7 @@
 
 	stusb1600_pins_a: stusb1600-0 {
 		pins {
-			pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
+			pinmux = <STM32_PINMUX('I', 11, GPIO)>;
 			bias-pull-up;
 		};
 	};
@@ -1704,20 +1960,20 @@
 	};
 
 	uart4_idle_pins_a: uart4-idle-0 {
-		   pins1 {
-			 pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
-		   };
-		   pins2 {
-			 pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-			 bias-disable;
-		   };
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
 	};
 
 	uart4_sleep_pins_a: uart4-sleep-0 {
-		   pins {
+		pins {
 			pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
 				 <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
-		    };
+		};
 	};
 
 	uart4_pins_b: uart4-1 {
@@ -1746,6 +2002,49 @@
 		};
 	};
 
+	uart4_pins_d: uart4-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 13, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_idle_pins_d: uart4-idle-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 13, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_sleep_pins_d: uart4-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 13, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+		};
+	};
+
+	uart5_pins_a: uart5-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 13, AF14)>; /* UART5_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 5, AF12)>; /* UART5_RX */
+			bias-disable;
+		};
+	};
+
 	uart7_pins_a: uart7-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
@@ -1783,7 +2082,7 @@
 		};
 		pins2 {
 			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
-			bias-disable;
+			bias-pull-up;
 		};
 	};
 
@@ -1793,7 +2092,7 @@
 		};
 		pins2 {
 			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
-			bias-disable;
+			bias-pull-up;
 		};
 	};
 
@@ -1879,7 +2178,7 @@
 				 <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
 			bias-disable;
 			drive-push-pull;
-			slew-rate = <3>;
+			slew-rate = <0>;
 		};
 		pins2 {
 			pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
@@ -1891,10 +2190,15 @@
 	usart2_idle_pins_c: usart2-idle-2 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
-				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
 				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
 		};
 		pins2 {
+			pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
 			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
 			bias-disable;
 		};
@@ -1933,19 +2237,24 @@
 		pins2 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
 				 <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
-			bias-disable;
+			bias-pull-up;
 		};
 	};
 
 	usart3_idle_pins_b: usart3-idle-1 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
 				 <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
 			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			bias-pull-up;
 		};
 	};
 
@@ -1969,19 +2278,24 @@
 		pins2 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
 				 <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
-			bias-disable;
+			bias-pull-up;
 		};
 	};
 
 	usart3_idle_pins_c: usart3-idle-2 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
 				 <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
 			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			bias-pull-up;
 		};
 	};
 
@@ -1994,6 +2308,83 @@
 		};
 	};
 
+	usart3_pins_d: usart3-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 9, AF7)>, /* USART3_RX */
+				 <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart3_idle_pins_d: usart3-idle-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('D', 11, ANALOG)>; /* USART3_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 9, AF7)>; /* USART3_RX */
+			bias-disable;
+		};
+	};
+
+	usart3_sleep_pins_d: usart3-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('D', 9, ANALOG)>; /* USART3_RX */
+		};
+	};
+
+	usart3_pins_e: usart3-4 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */
+				 <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+			bias-pull-up;
+		};
+	};
+
+	usart3_idle_pins_e: usart3-idle-4 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('D', 11, ANALOG)>; /* USART3_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('B', 11, AF7)>; /* USART3_RX */
+			bias-pull-up;
+		};
+	};
+
+	usart3_sleep_pins_e: usart3-sleep-4 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('B', 11, ANALOG)>; /* USART3_RX */
+		};
+	};
+
 	usbotg_hs_pins_a: usbotg-hs-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
diff --git a/arch/arm/boot/dts/stm32mp15-scmi.dtsi b/arch/arm/boot/dts/stm32mp15-scmi.dtsi
new file mode 100644
index 000000000000..543f24c2f4f6
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15-scmi.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+	firmware {
+		optee: optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		scmi: scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+			shmem = <&scmi_shm>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+
+			scmi_voltd: protocol@17 {
+				reg = <0x17>;
+
+				scmi_reguls: regulators {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					scmi_reg11: reg11@0 {
+						reg = <0>;
+						regulator-name = "reg11";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+					};
+
+					scmi_reg18: reg18@1 {
+						voltd-name = "reg18";
+						reg = <1>;
+						regulator-name = "reg18";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					scmi_usb33: usb33@2 {
+						reg = <2>;
+						regulator-name = "usb33";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+				};
+			};
+		};
+	};
+
+	soc {
+		scmi_sram: sram@2ffff000 {
+			compatible = "mmio-sram";
+			reg = <0x2ffff000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x2ffff000 0x1000>;
+
+			scmi_shm: scmi-sram@0 {
+				compatible = "arm,scmi-shmem";
+				reg = <0 0x80>;
+			};
+		};
+	};
+};
+
+&reg11 {
+	status = "disabled";
+};
+
+&reg18 {
+	status = "disabled";
+};
+
+&usb33 {
+	status = "disabled";
+};
+
+&usbotg_hs {
+	usb33d-supply = <&scmi_usb33>;
+};
+
+&usbphyc {
+	vdda1v1-supply = <&scmi_reg11>;
+	vdda1v8-supply = <&scmi_reg18>;
+};
+
+/delete-node/ &clk_hse;
+/delete-node/ &clk_hsi;
+/delete-node/ &clk_lse;
+/delete-node/ &clk_lsi;
+/delete-node/ &clk_csi;
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 4b8031782555..63f4c78fcc1d 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -45,10 +45,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-parent = <&intc>;
 	};
 
@@ -127,6 +127,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40000000 0x400>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM2_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 18 0x400 0x1>,
@@ -160,6 +162,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001000 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM3_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 23 0x400 0x1>,
@@ -194,6 +198,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM4_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 29 0x400 0x1>,
@@ -226,6 +232,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40003000 0x400>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM5_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 55 0x400 0x1>,
@@ -260,6 +268,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40004000 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM6_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 69 0x400 0x1>;
@@ -278,6 +288,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40005000 0x400>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM7_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 70 0x400 0x1>;
@@ -296,6 +308,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40006000 0x400>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM12_K>;
 			clock-names = "int";
 			status = "disabled";
@@ -318,6 +332,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40007000 0x400>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM13_K>;
 			clock-names = "int";
 			status = "disabled";
@@ -340,6 +356,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40008000 0x400>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM14_K>;
 			clock-names = "int";
 			status = "disabled";
@@ -452,32 +470,48 @@
 		usart2: serial@4000e000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x4000e000 0x400>;
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc USART2_K>;
+			wakeup-source;
+			dmas = <&dmamux1 43 0x400 0x15>,
+			       <&dmamux1 44 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		usart3: serial@4000f000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x4000f000 0x400>;
-			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc USART3_K>;
+			wakeup-source;
+			dmas = <&dmamux1 45 0x400 0x15>,
+			       <&dmamux1 46 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		uart4: serial@40010000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40010000 0x400>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART4_K>;
+			wakeup-source;
+			dmas = <&dmamux1 63 0x400 0x15>,
+			       <&dmamux1 64 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		uart5: serial@40011000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40011000 0x400>;
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART5_K>;
+			wakeup-source;
+			dmas = <&dmamux1 65 0x400 0x15>,
+			       <&dmamux1 66 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -493,6 +527,7 @@
 			#size-cells = <0>;
 			st,syscfg-fmp = <&syscfg 0x4 0x1>;
 			wakeup-source;
+			i2c-analog-filter;
 			status = "disabled";
 		};
 
@@ -508,6 +543,7 @@
 			#size-cells = <0>;
 			st,syscfg-fmp = <&syscfg 0x4 0x2>;
 			wakeup-source;
+			i2c-analog-filter;
 			status = "disabled";
 		};
 
@@ -523,6 +559,7 @@
 			#size-cells = <0>;
 			st,syscfg-fmp = <&syscfg 0x4 0x4>;
 			wakeup-source;
+			i2c-analog-filter;
 			status = "disabled";
 		};
 
@@ -538,6 +575,7 @@
 			#size-cells = <0>;
 			st,syscfg-fmp = <&syscfg 0x4 0x10>;
 			wakeup-source;
+			i2c-analog-filter;
 			status = "disabled";
 		};
 
@@ -545,7 +583,7 @@
 			compatible = "st,stm32-cec";
 			reg = <0x40016000 0x400>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rcc CEC_K>, <&clk_lse>;
+			clocks = <&rcc CEC_K>, <&rcc CEC>;
 			clock-names = "cec", "hdmi-cec";
 			status = "disabled";
 		};
@@ -577,16 +615,24 @@
 		uart7: serial@40018000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40018000 0x400>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART7_K>;
+			wakeup-source;
+			dmas = <&dmamux1 79 0x400 0x15>,
+			       <&dmamux1 80 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
 		uart8: serial@40019000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40019000 0x400>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART8_K>;
+			wakeup-source;
+			dmas = <&dmamux1 81 0x400 0x15>,
+			       <&dmamux1 82 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -595,6 +641,11 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x44000000 0x400>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "brk", "up", "trg-com", "cc";
 			clocks = <&rcc TIM1_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 11 0x400 0x1>,
@@ -631,6 +682,11 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x44001000 0x400>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "brk", "up", "trg-com", "cc";
 			clocks = <&rcc TIM8_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 47 0x400 0x1>,
@@ -665,8 +721,12 @@
 		usart6: serial@44003000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x44003000 0x400>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc USART6_K>;
+			wakeup-source;
+			dmas = <&dmamux1 71 0x400 0x15>,
+			       <&dmamux1 72 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -714,6 +774,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x44006000 0x400>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM15_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 105 0x400 0x1>,
@@ -741,6 +803,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x44007000 0x400>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM16_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 109 0x400 0x1>,
@@ -765,6 +829,8 @@
 			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x44008000 0x400>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "global";
 			clocks = <&rcc TIM17_K>;
 			clock-names = "int";
 			dmas = <&dmamux1 111 0x400 0x1>,
@@ -813,7 +879,7 @@
 				#sound-dai-cells = <0>;
 
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x4 0x1c>;
+				reg = <0x4 0x20>;
 				clocks = <&rcc SAI1_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 87 0x400 0x01>;
@@ -823,7 +889,7 @@
 			sai1b: audio-controller@4400a024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI1_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 88 0x400 0x01>;
@@ -844,7 +910,7 @@
 			sai2a: audio-controller@4400b004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x4 0x1c>;
+				reg = <0x4 0x20>;
 				clocks = <&rcc SAI2_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 89 0x400 0x01>;
@@ -854,7 +920,7 @@
 			sai2b: audio-controller@4400b024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI2_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 90 0x400 0x01>;
@@ -875,7 +941,7 @@
 			sai3a: audio-controller@4400c004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x04 0x1c>;
+				reg = <0x04 0x20>;
 				clocks = <&rcc SAI3_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 113 0x400 0x01>;
@@ -885,7 +951,7 @@
 			sai3b: audio-controller@4400c024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI3_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 114 0x400 0x01>;
@@ -1048,11 +1114,10 @@
 		};
 
 		sdmmc3: mmc@48004000 {
-			compatible = "arm,pl18x", "arm,primecell";
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x48004000 0x400>;
 			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC3_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC3_R>;
@@ -1065,8 +1130,8 @@
 		usbotg_hs: usb-otg@49000000 {
 			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
 			reg = <0x49000000 0x10000>;
-			clocks = <&rcc USBO_K>;
-			clock-names = "otg";
+			clocks = <&rcc USBO_K>, <&usbphyc>;
+			clock-names = "otg", "utmi";
 			resets = <&rcc USBO_R>;
 			reset-names = "dwc2";
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -1074,6 +1139,7 @@
 			g-np-tx-fifo-size = <32>;
 			g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
 			dr_mode = "otg";
+			otg-rev = <0x200>;
 			usb33d-supply = <&usb33>;
 			status = "disabled";
 		};
@@ -1084,10 +1150,9 @@
 			reg = <0x4c001000 0x400>;
 			st,proc-id = <0>;
 			interrupts-extended =
-				<&intc GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-				<&exti 61 1>;
-			interrupt-names = "rx", "tx", "wakeup";
+				<&exti 61 1>,
+				<&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "rx", "tx";
 			clocks = <&rcc IPCC>;
 			wakeup-source;
 			status = "disabled";
@@ -1260,7 +1325,7 @@
 			sai4a: audio-controller@50027004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x04 0x1c>;
+				reg = <0x04 0x20>;
 				clocks = <&rcc SAI4_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 99 0x400 0x01>;
@@ -1270,7 +1335,7 @@
 			sai4b: audio-controller@50027024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI4_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 100 0x400 0x01>;
@@ -1358,8 +1423,8 @@
 			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
 			reg-names = "qspi", "qspi_mm";
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>,
-			       <&mdma1 22 0x2 0x100008 0x0 0x0>;
+			dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>,
+			       <&mdma1 22 0x2 0x10100008 0x0 0x0>;
 			dma-names = "tx", "rx";
 			clocks = <&rcc QSPI_K>;
 			resets = <&rcc QSPI_R>;
@@ -1369,11 +1434,10 @@
 		};
 
 		sdmmc1: mmc@58005000 {
-			compatible = "arm,pl18x", "arm,primecell";
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x58005000 0x1000>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC1_R>;
@@ -1384,11 +1448,10 @@
 		};
 
 		sdmmc2: mmc@58007000 {
-			compatible = "arm,pl18x", "arm,primecell";
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x58007000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC2_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC2_R>;
@@ -1405,12 +1468,6 @@
 			status = "disabled";
 		};
 
-		stmmac_axi_config_0: stmmac-axi-config {
-			snps,wr_osr_lmt = <0x7>;
-			snps,rd_osr_lmt = <0x7>;
-			snps,blen = <0 0 0 0 16 8 4>;
-		};
-
 		ethernet0: ethernet@5800a000 {
 			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
 			reg = <0x5800a000 0x2000>;
@@ -1421,11 +1478,13 @@
 				      "mac-clk-tx",
 				      "mac-clk-rx",
 				      "eth-ck",
+				      "ptp_ref",
 				      "ethstp";
 			clocks = <&rcc ETHMAC>,
 				 <&rcc ETHTX>,
 				 <&rcc ETHRX>,
 				 <&rcc ETHCK_K>,
+				 <&rcc ETHPTP_K>,
 				 <&rcc ETHSTP>;
 			st,syscon = <&syscfg 0x4>;
 			snps,mixed-burst;
@@ -1434,12 +1493,18 @@
 			snps,axi-config = <&stmmac_axi_config_0>;
 			snps,tso;
 			status = "disabled";
+
+			stmmac_axi_config_0: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
 		};
 
 		usbh_ohci: usb@5800c000 {
 			compatible = "generic-ohci";
 			reg = <0x5800c000 0x1000>;
-			clocks = <&rcc USBH>;
+			clocks = <&usbphyc>, <&rcc USBH>;
 			resets = <&rcc USBH_R>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -1448,7 +1513,7 @@
 		usbh_ehci: usb@5800d000 {
 			compatible = "generic-ehci";
 			reg = <0x5800d000 0x1000>;
-			clocks = <&rcc USBH>;
+			clocks = <&usbphyc>, <&rcc USBH>;
 			resets = <&rcc USBH_R>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			companion = <&usbh_ohci>;
@@ -1505,8 +1570,9 @@
 		usart1: serial@5c000000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x5c000000 0x400>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc USART1_K>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -1536,6 +1602,7 @@
 			#size-cells = <0>;
 			st,syscfg-fmp = <&syscfg 0x4 0x8>;
 			wakeup-source;
+			i2c-analog-filter;
 			status = "disabled";
 		};
 
@@ -1544,7 +1611,7 @@
 			reg = <0x5c004000 0x400>;
 			clocks = <&rcc RTCAPB>, <&rcc RTC>;
 			clock-names = "pclk", "rtc_ck";
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
@@ -1573,6 +1640,7 @@
 			#size-cells = <0>;
 			st,syscfg-fmp = <&syscfg 0x4 0x20>;
 			wakeup-source;
+			i2c-analog-filter;
 			status = "disabled";
 		};
 
@@ -1585,14 +1653,13 @@
 		 * Break node order to solve dependency probe issue between
 		 * pinctrl and exti.
 		 */
-		pinctrl: pin-controller@50002000 {
+		pinctrl: pinctrl@50002000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "st,stm32mp157-pinctrl";
 			ranges = <0 0x50002000 0xa400>;
 			interrupt-parent = <&exti>;
 			st,syscfg = <&exti 0x60 0xff>;
-			pins-are-numbered;
 
 			gpioa: gpio@50002000 {
 				gpio-controller;
@@ -1716,12 +1783,11 @@
 			};
 		};
 
-		pinctrl_z: pin-controller-z@54004000 {
+		pinctrl_z: pinctrl@54004000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "st,stm32mp157-z-pinctrl";
 			ranges = <0 0x54004000 0x400>;
-			pins-are-numbered;
 			interrupt-parent = <&exti>;
 			st,syscfg = <&exti 0x60 0xff>;
 
diff --git a/arch/arm/boot/dts/stm32mp151a-dhcor-testbench.dts b/arch/arm/boot/dts/stm32mp151a-dhcor-testbench.dts
new file mode 100644
index 000000000000..e0f828ecc2fa
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp151a-dhcor-testbench.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include "stm32mp151.dtsi"
+#include "stm32mp15xx-dhcor-som.dtsi"
+#include "stm32mp15xx-dhcor-testbench.dtsi"
+
+/ {
+	model = "DH electronics STM32MP151A DHCOR Testbench";
+	compatible = "dh,stm32mp151a-dhcor-testbench",
+		     "dh,stm32mp151a-dhcor-som",
+		     "st,stm32mp151";
+};
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1a.dts b/arch/arm/boot/dts/stm32mp151a-prtt1a.dts
new file mode 100644
index 000000000000..75874eafde11
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp151a-prtt1a.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151a-prtt1l.dtsi"
+
+/ {
+	model = "Protonic PRTT1A";
+	compatible = "prt,prtt1a", "st,stm32mp151";
+};
+
+&ethernet0 {
+	phy-handle = <&phy0>;
+};
+
+&mdio0 {
+	/* TI DP83TD510E */
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id2000.0181";
+		reg = <0>;
+		interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+};
+
+&pwm5_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
+	};
+};
+
+&pwm5_sleep_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */
+	};
+};
+
+&timers5 {
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm5_pins_a>;
+		pinctrl-1 = <&pwm5_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1c.dts b/arch/arm/boot/dts/stm32mp151a-prtt1c.dts
new file mode 100644
index 000000000000..7ecf31263abc
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp151a-prtt1c.dts
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151a-prtt1l.dtsi"
+
+/ {
+	model = "Protonic PRTT1C";
+	compatible = "prt,prtt1c", "st,stm32mp151";
+
+	clock_ksz9031: clock-ksz9031 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clock_sja1105: clock-sja1105 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpioc 1 GPIO_ACTIVE_HIGH
+			 &gpioa 2 GPIO_ACTIVE_HIGH>;
+
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpiod 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ethernet0 {
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&gpioa {
+	gpio-line-names =
+		"", "", "", "PHY0_nRESET", "PHY0_nINT", "", "", "",
+		"", "", "", "", "", "", "", "SPI1_nSS";
+};
+
+&gpiod {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"WFM_RESET", "", "", "", "", "", "", "";
+};
+
+&gpioe {
+	gpio-line-names =
+		"SDMMC2_nRESET", "", "", "", "", "", "SPI1_nRESET", "",
+		"", "", "", "", "WFM_nIRQ", "", "", "";
+};
+
+&gpiog {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "PHY3_nINT",
+		"PHY1_nINT", "PHY3_nRESET", "PHY2_nINT", "PHY2_nRESET",
+		"PHY1_nRESET", "SPE1_PWR", "SPE0_PWR", "";
+};
+
+&mdio0 {
+	/* All this DP83TD510E PHYs can't be probed before switch@0 is
+	 * probed so we need to use compatible with PHYid
+	 */
+	/* TI DP83TD510E */
+	t1l0_phy: ethernet-phy@6 {
+		compatible = "ethernet-phy-id2000.0181";
+		reg = <6>;
+		interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+
+	/* TI DP83TD510E */
+	t1l1_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-id2000.0181";
+		reg = <7>;
+		interrupts-extended = <&gpiog 8 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpiog 12 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+
+	/* TI DP83TD510E */
+	t1l2_phy: ethernet-phy@10 {
+		compatible = "ethernet-phy-id2000.0181";
+		reg = <10>;
+		interrupts-extended = <&gpiog 10 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpiog 11 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+
+	/* Micrel KSZ9031 */
+	rj45_phy: ethernet-phy@2 {
+		reg = <2>;
+		interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <1000>;
+
+		clocks = <&clock_ksz9031>;
+	};
+};
+
+&qspi {
+	status = "disabled";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	no-1-8-v;
+	st,neg-edge;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&sdmmc2_b4_od_pins_a {
+	pins1 {
+		pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+			 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+			 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+			 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+	};
+};
+
+&sdmmc2_b4_pins_a {
+	pins1 {
+		pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+			 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+			 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+			 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+			 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+	};
+};
+
+&sdmmc2_b4_sleep_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+			 <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
+			 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+			 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+			 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+			 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+	};
+};
+
+&sdmmc2_d47_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+			 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+			 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+			 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+	};
+};
+
+&sdmmc2_d47_sleep_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+			 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+			 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+			 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+	};
+};
+
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_b>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_b>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>;
+	non-removable;
+	no-1-8-v;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	mmc@1 {
+		compatible = "prt,prtt1c-wfm200", "silabs,wf200";
+		reg = <1>;
+	};
+};
+
+&sdmmc3_b4_od_pins_b {
+	pins1 {
+		pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+			 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+			 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+			 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+	};
+};
+
+&sdmmc3_b4_pins_b {
+	pins1 {
+		pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+			 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+			 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+			 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+			 <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
+	};
+};
+
+&sdmmc3_b4_sleep_pins_b {
+	pins {
+		pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
+			 <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
+			 <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
+			 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+			 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+			 <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pins_b>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	switch@0 {
+		compatible = "nxp,sja1105q";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+		spi-rx-delay-us = <1>;
+		spi-tx-delay-us = <1>;
+		spi-cpha;
+
+		reset-gpios = <&gpioe 6 GPIO_ACTIVE_LOW>;
+
+		clocks = <&clock_sja1105>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "t1l0";
+				phy-mode = "rmii";
+				phy-handle = <&t1l0_phy>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "t1l1";
+				phy-mode = "rmii";
+				phy-handle = <&t1l1_phy>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "t1l2";
+				phy-mode = "rmii";
+				phy-handle = <&t1l2_phy>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "rj45";
+				phy-handle = <&rj45_phy>;
+				phy-mode = "rgmii-id";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "cpu";
+				ethernet = <&ethernet0>;
+				phy-mode = "rmii";
+
+				fixed-link {
+					speed = <100>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
new file mode 100644
index 000000000000..dd23de85100c
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxad-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		mdio-gpio0 = &mdio0;
+		serial0 = &uart4;
+	};
+
+	led-controller-0 {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+
+	/* DP83TD510E PHYs have max MDC rate of 1.75MHz. Since we can't reduce
+	 * stmmac MDC clock without reducing system bus rate, we need to use
+	 * gpio based MDIO bus.
+	 */
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpioc 1 GPIO_ACTIVE_HIGH
+			 &gpioa 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&ethernet0 {
+	pinctrl-0 = <&ethernet0_rmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&ethernet0_rmii_pins_a {
+	pins1 {
+		pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
+			 <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
+			 <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */
+	};
+	pins2 {
+		pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+			 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+			 <STM32_PINMUX('A', 1, AF11)>,  /* ETH1_RMII_REF_CLK input */
+			 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+	};
+};
+
+&ethernet0_rmii_sleep_pins_a {
+	pins1 {
+		pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
+			 <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
+			 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+			 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+			 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+			 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+			 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
+	};
+};
+
+&iwdg2 {
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <104000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&qspi_bk1_pins_a {
+	pins1 {
+		bias-pull-up;
+		drive-push-pull;
+		slew-rate = <1>;
+	};
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	broken-cd;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&sdmmc1_b4_od_pins_a {
+	pins1 {
+		bias-pull-up;
+	};
+	pins2 {
+		bias-pull-up;
+	};
+};
+
+&sdmmc1_b4_pins_a {
+	pins1 {
+		bias-pull-up;
+	};
+	pins2 {
+		bias-pull-up;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart4_idle_pins_a {
+	pins1 {
+		pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */
+	};
+	pins2 {
+		pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+		bias-pull-up;
+	};
+};
+
+&uart4_pins_a {
+	pins1 {
+		pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
+		bias-disable;
+		drive-push-pull;
+		slew-rate = <0>;
+	};
+	pins2 {
+		pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+		bias-pull-up;
+	};
+};
+
+&uart4_sleep_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */
+			<STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+	};
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&reg_3v3>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&reg_3v3>;
+};
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1s.dts b/arch/arm/boot/dts/stm32mp151a-prtt1s.dts
new file mode 100644
index 000000000000..ad25929e64e6
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp151a-prtt1s.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151a-prtt1l.dtsi"
+
+/ {
+	model = "Protonic PRTT1S";
+	compatible = "prt,prtt1s", "st,stm32mp151";
+};
+
+&ethernet0 {
+	phy-handle = <&phy0>;
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	clock-frequency = <100000>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+
+	humidity-sensor@40 {
+		compatible = "ti,hdc1080";
+		reg = <0x40>;
+	};
+
+	co2-sensor@62 {
+		compatible = "sensirion,scd41";
+		reg = <0x62>;
+	};
+};
+
+&i2c1_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+			 <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
+	};
+};
+
+&i2c1_sleep_pins_a {
+	pins {
+		pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+			 <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
+	};
+};
+
+&mdio0 {
+	/* TI DP83TD510E */
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id2000.0181";
+		reg = <0>;
+		interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <35>;
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi
index 1c1889b194cf..486084e0b80b 100644
--- a/arch/arm/boot/dts/stm32mp153.dtsi
+++ b/arch/arm/boot/dts/stm32mp153.dtsi
@@ -22,6 +22,13 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
+	timer {
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
 	soc {
 		m_can1: can@4400e000 {
 			compatible = "bosch,m_can";
diff --git a/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts b/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts
index 02a39132958e..b4e504f026ce 100644
--- a/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts
+++ b/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts
@@ -20,6 +20,10 @@
 		     "st,stm32mp153";
 };
 
+&cryp1 {
+	status = "okay";
+};
+
 &m_can1 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&m_can1_pins_a>;
diff --git a/arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dts b/arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dts
new file mode 100644
index 000000000000..c8b9818499ea
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp153c-dhcor-drc-compact.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ *
+ * DHCOR STM32MP1 variant:
+ * DHCR-STM32MP153C-C065-R051-V33-SPI-I-01LG
+ * DHCOR PCB number: 586-100 or newer
+ * DRC Compact PCB number: 627-100 or newer
+ */
+
+/dts-v1/;
+
+#include "stm32mp153.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xx-dhcor-som.dtsi"
+#include "stm32mp15xx-dhcor-drc-compact.dtsi"
+
+/ {
+	model = "DH electronics STM32MP153C DHCOR DRC Compact";
+	compatible = "dh,stm32mp153c-dhcor-drc-compact",
+		     "dh,stm32mp153c-dhcor-som",
+		     "st,stm32mp153";
+};
+
+&m_can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_c>;
+	pinctrl-1 = <&m_can1_sleep_pins_c>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
index 2e3c9fbb4eb3..275167f26fd9 100644
--- a/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
@@ -13,7 +13,6 @@
 /dts-v1/;
 
 #include "stm32mp157.dtsi"
-#include "stm32mp15xc.dtsi"
 #include "stm32mp15xx-dhcor-som.dtsi"
 #include "stm32mp15xx-dhcor-avenger96.dtsi"
 
diff --git a/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts
new file mode 100644
index 000000000000..e539cc80bef8
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157a-dk1.dts"
+#include "stm32mp15-scmi.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
+	compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157";
+
+	reserved-memory {
+		optee@de000000 {
+			reg = <0xde000000 0x2000000>;
+			no-map;
+		};
+	};
+};
+
+&cpu0 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&dsi {
+	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+	clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+	clocks = <&scmi_clk CK_SCMI_HASH1>;
+	resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c4 {
+	clocks = <&scmi_clk CK_SCMI_I2C4>;
+	resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&iwdg2 {
+	clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+};
+
+&mdma1 {
+	resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&mlahb {
+	resets = <&scmi_reset RST_SCMI_MCU>;
+};
+
+&rcc {
+	compatible = "st,stm32mp1-rcc-secure", "syscon";
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&scmi_clk CK_SCMI_HSE>,
+		 <&scmi_clk CK_SCMI_HSI>,
+		 <&scmi_clk CK_SCMI_CSI>,
+		 <&scmi_clk CK_SCMI_LSE>,
+		 <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+	clocks = <&scmi_clk CK_SCMI_RNG1>;
+	resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index 4c8be9c8eb20..0da3667ab1e0 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -17,9 +17,6 @@
 
 	aliases {
 		ethernet0 = &ethernet0;
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart7;
 	};
 
 	chosen {
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts
new file mode 100644
index 000000000000..9a2a4bc7d079
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2-of10.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-icore-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1\" Open Frame";
+	compatible = "engicam,icore-stm32mp1-ctouch2-of10",
+		     "engicam,icore-stm32mp1", "st,stm32mp157";
+
+	aliases {
+		serial0 = &uart4;
+	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	panel {
+		compatible = "ampire,am-1280800n3tzqw-t00h";
+		backlight = <&backlight>;
+		power-supply = <&v3v3>;
+
+		port {
+			panel_in_lvds: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&dsi {
+	status = "okay";
+	phy-dsi-supply = <&reg18>;
+
+	ports {
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <185>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c6_pins_a>;
+	pinctrl-1 = <&i2c6_sleep_pins_a>;
+	status = "okay";
+
+	bridge@2c {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2c>;
+		enable-gpios = <&gpiof 15 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				bridge_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+					data-lanes = <1 2>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in_lvds>;
+				};
+			};
+		};
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
new file mode 100644
index 000000000000..60ce4425a7fd
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-icore-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Engicam i.Core STM32MP1 C.TOUCH 2.0";
+	compatible = "engicam,icore-stm32mp1-ctouch2",
+		     "engicam,icore-stm32mp1", "st,stm32mp157";
+
+	aliases {
+		serial0 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
new file mode 100644
index 000000000000..390ee8c05754
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-icore-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit";
+	compatible = "engicam,icore-stm32mp1-edimm2.2",
+		     "engicam,icore-stm32mp1", "st,stm32mp157";
+
+	aliases {
+		serial0 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	panel {
+		compatible = "yes-optoelectronics,ytc700tlag-05-201c";
+		backlight = <&backlight>;
+		power-supply = <&v3v3>;
+
+		port {
+			panel_out_bridge: endpoint {
+				remote-endpoint = <&bridge_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi {
+	status = "okay";
+	phy-dsi-supply = <&reg18>;
+
+	ports {
+		port@0 {
+			reg = <0>;
+			dsi_in_ltdc: endpoint {
+				remote-endpoint = <&ltdc_out_dsi>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out_bridge: endpoint {
+				remote-endpoint = <&bridge_in_dsi>;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <185>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c6_pins_a>;
+	pinctrl-1 = <&i2c6_sleep_pins_a>;
+	status = "okay";
+
+	bridge@2c {
+		compatible = "ti,sn65dsi84";
+		reg = <0x2c>;
+		enable-gpios = <&gpiof 15 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				bridge_in_dsi: endpoint {
+					remote-endpoint = <&dsi_out_bridge>;
+					data-lanes = <1 2>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				bridge_out_panel: endpoint {
+					remote-endpoint = <&panel_out_bridge>;
+				};
+			};
+		};
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_out_dsi: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dsi_in_ltdc>;
+		};
+	};
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi
new file mode 100644
index 000000000000..9de893101b40
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/ {
+	compatible = "engicam,icore-stm32mp1", "st,stm32mp157";
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+	};
+
+	vddcore: regulator-vddcore {
+		compatible = "regulator-fixed";
+		regulator-name = "vddcore";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	vdd: regulator-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_usb: regulator-vdd-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_usb";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdda: regulator-vdda {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_ddr: regulator-vdd-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+	};
+
+	vtt_ddr: regulator-vtt-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_ddr";
+		regulator-min-microvolt = <675000>;
+		regulator-max-microvolt = <675000>;
+		regulator-always-on;
+		vin-supply = <&vdd>;
+	};
+
+	vref_ddr: regulator-vref-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_ddr";
+		regulator-min-microvolt = <675000>;
+		regulator-max-microvolt = <675000>;
+		regulator-always-on;
+		vin-supply = <&vdd>;
+	};
+
+	vdd_sd: regulator-vdd-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	v3v3: regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	v2v8: regulator-v2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "v2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+		vin-supply = <&v3v3>;
+	};
+
+	v1v8: regulator-v1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "v1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&v3v3>;
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&i2c2 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <185>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-1 = <&i2c2_sleep_pins_a>;
+	status = "okay";
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2{
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc{
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc{
+	status = "okay";
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-iot-box.dts b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
index 70f394b4d3c0..6a5a4af25bd9 100644
--- a/arch/arm/boot/dts/stm32mp157a-iot-box.dts
+++ b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
@@ -58,6 +58,8 @@
 	/delete-property/st,hw-flow-ctrl;
 	cts-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpiob 0 GPIO_ACTIVE_LOW>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 
 	bluetooth {
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
new file mode 100644
index 000000000000..0d7560ba2950
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-microgea-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Engicam MicroGEA STM32MP1 MicroDev 2.0 7\" Open Frame";
+	compatible = "engicam,microgea-stm32mp1-microdev2.0-of7",
+		     "engicam,microgea-stm32mp1", "st,stm32mp157";
+
+	aliases {
+		serial0 = &uart4;
+		serial1 = &uart8;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpiof 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		power-supply = <&panel_pwr>;
+	};
+
+	panel_pwr: regulator-panel-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "panel_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpiob 10 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	panel {
+		compatible = "auo,b101aw03";
+		backlight = <&backlight>;
+		enable-gpios = <&gpiof 2 GPIO_ACTIVE_HIGH>;
+		power-supply = <&lcd_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <185>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-1 = <&i2c2_sleep_pins_a>;
+	status = "okay";
+};
+
+&ltdc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ltdc_pins>;
+	status = "okay";
+
+	port {
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pinctrl {
+	ltdc_pins: ltdc-0 {
+		pins {
+			pinmux = <STM32_PINMUX('G', 10, AF14)>,	/* LTDC_B2 */
+				 <STM32_PINMUX('H', 12, AF14)>,	/* LTDC_R6 */
+				 <STM32_PINMUX('H', 11, AF14)>,	/* LTDC_R5 */
+				 <STM32_PINMUX('D', 10, AF14)>,	/* LTDC_B3 */
+				 <STM32_PINMUX('D', 9, AF14)>,	/* LTDC_B0 */
+				 <STM32_PINMUX('E', 5, AF14)>,	/* LTDC_G0 */
+				 <STM32_PINMUX('E', 6, AF14)>,	/* LTDC_G1 */
+				 <STM32_PINMUX('E', 13, AF14)>,	/* LTDC_DE */
+				 <STM32_PINMUX('E', 15, AF14)>,	/* LTDC_R7 */
+				 <STM32_PINMUX('G', 7, AF14)>,	/* LTDC_CLK */
+				 <STM32_PINMUX('G', 12, AF14)>,	/* LTDC_B1 */
+				 <STM32_PINMUX('H', 2, AF14)>,	/* LTDC_R0 */
+				 <STM32_PINMUX('H', 3, AF14)>,	/* LTDC_R1 */
+				 <STM32_PINMUX('H', 8, AF14)>,	/* LTDC_R2 */
+				 <STM32_PINMUX('H', 9, AF14)>,	/* LTDC_R3 */
+				 <STM32_PINMUX('H', 10, AF14)>,	/* LTDC_R4 */
+				 <STM32_PINMUX('H', 13, AF14)>,	/* LTDC_G2 */
+				 <STM32_PINMUX('H', 14, AF14)>,	/* LTDC_G3 */
+				 <STM32_PINMUX('H', 15, AF14)>,	/* LTDC_G4 */
+				 <STM32_PINMUX('I', 0, AF14)>,	/* LTDC_G5 */
+				 <STM32_PINMUX('I', 1, AF14)>,	/* LTDC_G6 */
+				 <STM32_PINMUX('I', 2, AF14)>,	/* LTDC_G7 */
+				 <STM32_PINMUX('I', 4, AF14)>,	/* LTDC_B4 */
+				 <STM32_PINMUX('I', 5, AF14)>,	/* LTDC_B5 */
+				 <STM32_PINMUX('B', 8, AF14)>,	/* LTDC_B6 */
+				 <STM32_PINMUX('I', 7, AF14)>,	/* LTDC_B7 */
+				 <STM32_PINMUX('I', 9, AF14)>,	/* LTDC_VSYNC */
+				 <STM32_PINMUX('I', 10, AF14)>;	/* LTDC_HSYNC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+	};
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	st,neg-edge;
+	vmmc-supply = <&vdd>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+/* J31: RS323 */
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart8_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
new file mode 100644
index 000000000000..d949559be020
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "stm32mp157.dtsi"
+#include "stm32mp157a-microgea-stm32mp1.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Engicam MicroGEA STM32MP1 MicroDev 2.0 Carrier Board";
+	compatible = "engicam,microgea-stm32mp1-microdev2.0",
+		     "engicam,microgea-stm32mp1", "st,stm32mp157";
+
+	aliases {
+		serial0 = &uart4;
+		serial1 = &uart8;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	disable-wp;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	st,neg-edge;
+	vmmc-supply = <&vdd>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+/* J31: RS323 */
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart8_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
new file mode 100644
index 000000000000..fb4600a59869
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/ {
+	compatible = "engicam,microgea-stm32mp1", "st,stm32mp157";
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x10000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+	};
+
+	vin: regulator-vin {
+		compatible = "regulator-fixed";
+		regulator-name = "vin";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vddcore: regulator-vddcore {
+		compatible = "regulator-fixed";
+		regulator-name = "vddcore";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&vin>;
+	};
+
+	vdd: regulator-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vin>;
+	};
+
+	vddq_ddr: regulator-vddq-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vddq_ddr";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vin>;
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&fmc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&fmc_pins_a>;
+	pinctrl-1 = <&fmc_sleep_pins_a>;
+	status = "okay";
+
+	nand-controller@4,0 {
+		status = "okay";
+
+		nand@0 {
+			reg = <0>;
+			nand-on-flash-bbt;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2{
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc{
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc{
+	status = "okay";
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
index 113c48b2ef93..3a36f7fe0a2c 100644
--- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
@@ -184,8 +184,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -208,7 +206,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -219,13 +216,13 @@
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 
@@ -291,6 +288,8 @@
 	pinctrl-0 = <&usart2_pins_b>;
 	pinctrl-1 = <&usart2_sleep_pins_b>;
 	st,hw-flow-ctrl;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -299,6 +298,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_c>;
 	st,hw-flow-ctrl;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -306,6 +307,8 @@
 &uart7 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart7_pins_b>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
index d3b81382f97c..6dd8216c235e 100644
--- a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
@@ -20,6 +20,10 @@
 		     "st,stm32mp157";
 };
 
+&cryp1 {
+	status = "okay";
+};
+
 &m_can1 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&m_can1_pins_a>;
diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts
index cfb8f8a0c82d..7067a860aaff 100644
--- a/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts
@@ -20,6 +20,10 @@
 		     "st,stm32mp157";
 };
 
+&cryp1 {
+	status = "okay";
+};
+
 &m_can1 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&m_can1_pins_a>;
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts
new file mode 100644
index 000000000000..97e4f94b0a24
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c-dk2.dts"
+#include "stm32mp15-scmi.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
+	compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157";
+
+	reserved-memory {
+		optee@de000000 {
+			reg = <0xde000000 0x2000000>;
+			no-map;
+		};
+	};
+};
+
+&cpu0 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+	clocks = <&scmi_clk CK_SCMI_CRYP1>;
+	resets = <&scmi_reset RST_SCMI_CRYP1>;
+};
+
+&dsi {
+	phy-dsi-supply = <&scmi_reg18>;
+	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+	clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+	clocks = <&scmi_clk CK_SCMI_HASH1>;
+	resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c4 {
+	clocks = <&scmi_clk CK_SCMI_I2C4>;
+	resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&iwdg2 {
+	clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+};
+
+&mdma1 {
+	resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&mlahb {
+	resets = <&scmi_reset RST_SCMI_MCU>;
+};
+
+&rcc {
+	compatible = "st,stm32mp1-rcc-secure", "syscon";
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&scmi_clk CK_SCMI_HSE>,
+		 <&scmi_clk CK_SCMI_HSI>,
+		 <&scmi_clk CK_SCMI_CSI>,
+		 <&scmi_clk CK_SCMI_LSE>,
+		 <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+	clocks = <&scmi_clk CK_SCMI_RNG1>;
+	resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
index 2bc92ef3aeb9..ab13e340f4ef 100644
--- a/arch/arm/boot/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -18,9 +18,6 @@
 
 	aliases {
 		ethernet0 = &ethernet0;
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart7;
 		serial3 = &usart2;
 	};
 
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts
new file mode 100644
index 000000000000..9cf0a44d2f47
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c-ed1.dts"
+#include "stm32mp15-scmi.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
+	compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
+
+	reserved-memory {
+		optee@fe000000 {
+			reg = <0xfe000000 0x2000000>;
+			no-map;
+		};
+	};
+};
+
+&cpu0 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+	clocks = <&scmi_clk CK_SCMI_CRYP1>;
+	resets = <&scmi_reset RST_SCMI_CRYP1>;
+};
+
+&dsi {
+	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+	clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+	clocks = <&scmi_clk CK_SCMI_HASH1>;
+	resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c4 {
+	clocks = <&scmi_clk CK_SCMI_I2C4>;
+	resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&iwdg2 {
+	clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+};
+
+&mdma1 {
+	resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&mlahb {
+	resets = <&scmi_reset RST_SCMI_MCU>;
+};
+
+&rcc {
+	compatible = "st,stm32mp1-rcc-secure", "syscon";
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&scmi_clk CK_SCMI_HSE>,
+		 <&scmi_clk CK_SCMI_HSI>,
+		 <&scmi_clk CK_SCMI_CSI>,
+		 <&scmi_clk CK_SCMI_LSE>,
+		 <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+	clocks = <&scmi_clk CK_SCMI_RNG1>;
+	resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index 95b08876b2b3..8beb901be506 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -16,6 +16,10 @@
 	model = "STMicroelectronics STM32MP157C eval daughter";
 	compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
 
+	aliases {
+		serial0 = &uart4;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -65,15 +69,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@e8000000 {
-			reg = <0xe8000000 0x8000000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		serial0 = &uart4;
 	};
 
 	sd_switch: regulator-sd_switch {
@@ -140,10 +135,6 @@
 	status = "okay";
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-};
-
 &hash1 {
 	status = "okay";
 };
@@ -313,8 +304,8 @@
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
@@ -384,6 +375,8 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-1 = <&uart4_sleep_pins_a>;
 	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts b/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts
new file mode 100644
index 000000000000..33b3f11d24bb
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (c) 2021 emtrion GmbH
+// Author: Reinhold Müller <reinhold.mueller@emtrion.de>.
+//
+
+/dts-v1/;
+
+#include "stm32mp157c-emstamp-argon.dtsi"
+
+/ {
+	model = "emtrion STM32MP157C emSBC-Argon Developer Board";
+	compatible = "emtrion,stm32mp157c-emsbc-argon", "emtrion,stm32mp157c-emstamp-argon",
+			"st,stm32mp157";
+
+	led: gpio_leds {
+		compatible = "gpio-leds";
+		led-2 {
+			label = "red";
+			gpios = <&gpiof 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+		};
+		led-3 {
+			label = "green";
+			gpios = <&gpioe 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+		};
+	};
+};
+
+&dac {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
new file mode 100644
index 000000000000..b01470a9a3d5
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
@@ -0,0 +1,541 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (c) 2021 emtrion GmbH
+// Author: Reinhold Müller <reinhold.mueller@emtrion.de>.
+//
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+		serial1 = &usart2;
+		serial2 = &usart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x2000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x2000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10044000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10044000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+	};
+
+	led: gpio_leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "panic";
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+		led-1 {
+			label = "heartbeat";
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdd>;
+	vref-supply = <&vrefbuf>;
+	status = "okay";
+
+	adc1: adc@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&adc1_in6_pins_a>;
+		st,min-sample-time-nsecs = <5000>;
+		st,adc-channels = <6>;
+		status = "disabled";
+	};
+
+	adc2: adc@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		channel@12 {
+			reg = <12>;
+			label = "sense_temp";
+			st,min-sample-time-ns = <9000>;
+		};
+		channel@15 {
+			reg = <15>;
+			label = "vbat";
+			st,min-sample-time-ns = <9000>;
+		};
+		channel@16 {
+			reg = <16>;
+			label = "dac_out1";
+			st,min-sample-time-ns = <9000>;
+		};
+		channel@17 {
+			reg = <17>;
+			label = "dac_out1";
+			st,min-sample-time-ns = <9000>;
+		};
+	};
+};
+
+&crc1 {
+	status = "okay";
+};
+
+&cryp1 {
+	status = "okay";
+};
+
+&dac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
+	vref-supply = <&vdda>;
+	status = "disabled";
+
+	dac1: dac@1 {
+		status = "okay";
+	};
+	dac2: dac@2 {
+		status = "okay";
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	snps,reset-gpio = <&gpioa 1 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 30000 50000>;
+	pinctrl-0 = <&ethernet0_rmii_pins_b>;
+	pinctrl-1 = <&ethernet0_rmii_sleep_pins_b>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	max-speed = <100>;
+	phy-handle = <&phy0>;
+	st,eth-ref-clk-sel;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&hash1 {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "disabled";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v3v3_hdmi: ldo2 {
+				regulator-name = "v3v3_hdmi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdd_sd: ldo5 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-always-on;
+			};
+
+			vdda: ldo6 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+				regulator-boot-on;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+				regulator-active-discharge;
+			};
+
+			vbus_usbh: pwr_sw2 {
+				regulator-name = "usbh_vbus";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	interrupt-names = "wdg";
+	recovery;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <133000000>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc2 {
+	arm,primecell-periphid = <0x10153180>;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_b>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_b>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+	non-removable;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	cs-gpios = <&gpioz 3 0>;
+	status = "disabled";
+};
+
+&timers1 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pwm {
+		pinctrl-0 = <&pwm1_pins_b>;
+		pinctrl-1 = <&pwm1_sleep_pins_b>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pwm {
+		pinctrl-0 = <&pwm4_pins_b>;
+		pinctrl-1 = <&pwm4_sleep_pins_b>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@3 {
+		status = "okay";
+	};
+};
+
+&timers5 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pwm {
+		pinctrl-0 = <&pwm5_pins_a>;
+		pinctrl-1 = <&pwm5_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@4 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	status = "okay";
+};
+
+&usart2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&usart2_pins_a>;
+	pinctrl-1 = <&usart2_sleep_pins_a>;
+	status = "okay";
+};
+
+&usart3 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart3_pins_d>;
+	pinctrl-1 = <&usart3_sleep_pins_d>;
+	pinctrl-2 = <&usart3_idle_pins_d>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbh_ohci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	phy-names = "usb2-phy";
+	phys = <&usbphyc_port1 0>;
+	vbus-supply = <&vbus_otg>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts
new file mode 100644
index 000000000000..3b9dd6f4ccc9
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c-ev1.dts"
+#include "stm32mp15-scmi.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
+	compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1",
+		     "st,stm32mp157";
+
+	reserved-memory {
+		optee@fe000000 {
+			reg = <0xfe000000 0x2000000>;
+			no-map;
+		};
+	};
+};
+
+&cpu0 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+	clocks = <&scmi_clk CK_SCMI_CRYP1>;
+	resets = <&scmi_reset RST_SCMI_CRYP1>;
+};
+
+&dsi {
+	phy-dsi-supply = <&scmi_reg18>;
+	clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+	clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+	clocks = <&scmi_clk CK_SCMI_HASH1>;
+	resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c4 {
+	clocks = <&scmi_clk CK_SCMI_I2C4>;
+	resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&iwdg2 {
+	clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+};
+
+&m_can1 {
+	clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
+};
+
+&mdma1 {
+	resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&mlahb {
+	resets = <&scmi_reset RST_SCMI_MCU>;
+};
+
+&rcc {
+	compatible = "st,stm32mp1-rcc-secure", "syscon";
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&scmi_clk CK_SCMI_HSE>,
+		 <&scmi_clk CK_SCMI_HSI>,
+		 <&scmi_clk CK_SCMI_CSI>,
+		 <&scmi_clk CK_SCMI_LSE>,
+		 <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+	clocks = <&scmi_clk CK_SCMI_RNG1>;
+	resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 5c5b1ddf7bfd..ba8e9d9a42fa 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -8,21 +8,21 @@
 #include "stm32mp157c-ed1.dts"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/media/video-interfaces.h>
 
 / {
 	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
 	compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
 
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	aliases {
-		serial0 = &uart4;
 		serial1 = &usart3;
 		ethernet0 = &ethernet0;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	clocks {
 		clk_ext_camera: clk-ext-camera {
 			#clock-cells = <0>;
@@ -90,7 +90,7 @@
 	port {
 		dcmi_0: endpoint {
 			remote-endpoint = <&ov5640_0>;
-			bus-type = <5>;
+			bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
 			bus-width = <8>;
 			hsync-active = <0>;
 			vsync-active = <0>;
@@ -144,7 +144,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -255,14 +255,22 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a
+		     &qspi_bk2_pins_a
+		     &qspi_cs2_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a
+		     &qspi_bk2_sleep_pins_a
+		     &qspi_cs2_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
 
-	flash0: mx66l51235l@0 {
+	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;
@@ -271,7 +279,7 @@
 		#size-cells = <1>;
 	};
 
-	flash1: mx66l51235l@1 {
+	flash1: flash@1 {
 		compatible = "jedec,spi-nor";
 		reg = <1>;
 		spi-rx-bus-width = <4>;
@@ -362,6 +370,14 @@
 &usbh_ehci {
 	phys = <&usbphyc_port0>;
 	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* onboard HUB */
+	hub@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		vdd-supply = <&v3v3>;
+	};
 };
 
 &usbotg_hs {
@@ -375,3 +391,30 @@
 &usbphyc {
 	status = "okay";
 };
+
+&usbphyc_port0 {
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
+
+	connector {
+		compatible = "usb-a-connector";
+		vbus-supply = <&vbus_sw>;
+	};
+};
+
+&usbphyc_port1 {
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
index 1e9bf7eea0f1..407ed3952f75 100644
--- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
@@ -73,7 +73,7 @@
 	};
 
 	panel: panel {
-		compatible = "edt,etm0700g0edh6", "simple-panel";
+		compatible = "edt,etm0700g0edh6";
 		backlight = <&backlight>;
 		enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>;
 		power-supply = <&reg_3v3>;
@@ -112,7 +112,7 @@
 	phy-handle = <&ethphy>;
 	status = "okay";
 
-	mdio0 {
+	mdio {
 		compatible = "snps,dwmac-mdio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -248,5 +248,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
index 6cf49a0a9e69..e22871dc580c 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
@@ -62,11 +62,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@d4000000 {
-			reg = <0xd4000000 0x4000000>;
-			no-map;
-		};
 	};
 
 	led {
@@ -80,11 +75,6 @@
 	};
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-	status = "okay";
-};
-
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
@@ -173,8 +163,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -197,7 +185,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			 bst_out: boost {
@@ -213,7 +200,7 @@
 			 vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			 };
 		};
 
@@ -269,7 +256,7 @@
 	st,neg-edge;
 	bus-width = <8>;
 	vmmc-supply = <&v3v3>;
-	vqmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd>;
 	mmc-ddr-3_3v;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
index a7ffec8f1516..a8b3f7a54703 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
@@ -22,6 +22,12 @@
 	};
 };
 
+&dcmi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dcmi_pins_b>;
+	pinctrl-1 = <&dcmi_sleep_pins_b>;
+};
+
 &ethernet0 {
 	status = "okay";
 	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
@@ -35,7 +41,7 @@
 	assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */
 	st,eth-clk-sel;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -64,7 +70,7 @@
 	pinctrl-0 = <&sdmmc1_b4_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	cd-gpios = <&gpioi 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
 	disable-wp;
 	st,neg-edge;
 	bus-width = <4>;
@@ -75,6 +81,8 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
index fad23d6f69b8..35b1034aa3cf 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
@@ -43,15 +43,15 @@
 
 &gpiod {
 	gpio-line-names = "", "", "", "",
-			  "", "", "", "",
-			  "", "", "", "Out1",
-			  "Out2", "", "", "";
+			  "", "", "DHCOM-B", "",
+			  "", "", "", "DRC02-Out1",
+			  "DRC02-Out2", "", "", "";
 };
 
 &gpioi {
-	gpio-line-names = "In1", "", "", "",
-			  "", "", "", "",
-			  "In2", "", "", "",
+	gpio-line-names = "DRC02-In1", "DHCOM-O", "DHCOM-H", "DHCOM-I",
+			  "DHCOM-R", "DHCOM-M", "", "",
+			  "DRC02-In2", "", "", "",
 			  "", "", "", "";
 
 	/*
@@ -131,6 +131,8 @@
 &usart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usart3_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -144,6 +146,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8_pins_a>;
 	rts-gpios = <&gpioe 6 GPIO_ACTIVE_HIGH>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -159,3 +163,7 @@
 &usbphyc_port0 {
 	phy-supply = <&vdd_usb>;
 };
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 5523f4138fd6..4709677151aa 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -29,16 +29,16 @@
 		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
 		default-brightness-level = <8>;
 		enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_panel_bl>;
 		status = "okay";
 	};
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		/*
-		 * The EXTi IRQ line 3 is shared with touchscreen and ethernet,
+		 * The EXTi IRQ line 3 is shared with ethernet,
 		 * so mark this as polled GPIO key.
 		 */
 		button-0 {
@@ -48,6 +48,16 @@
 		};
 
 		/*
+		 * The EXTi IRQ line 6 is shared with touchscreen,
+		 * so mark this as polled GPIO key.
+		 */
+		button-1 {
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
+		};
+
+		/*
 		 * The EXTi IRQ line 0 is shared with PMIC,
 		 * so mark this as polled GPIO key.
 		 */
@@ -60,14 +70,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#size-cells = <0>;
-
-		button-1 {
-			label = "TA2-GPIO-B";
-			linux,code = <KEY_B>;
-			gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
 
 		button-3 {
 			label = "TA4-GPIO-D";
@@ -84,6 +86,7 @@
 			label = "green:led5";
 			gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
+			status = "disabled";
 		};
 
 		led-1 {
@@ -108,6 +111,7 @@
 	panel {
 		compatible = "edt,etm0700g0edh6";
 		backlight = <&display_bl>;
+		power-supply = <&reg_panel_bl>;
 
 		port {
 			lcd_panel_in: endpoint {
@@ -116,6 +120,21 @@
 		};
 	};
 
+	reg_panel_bl: regulator-panel-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "panel_backlight";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_panel_supply>;
+	};
+
+	reg_panel_supply: regulator-panel-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "panel_supply";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+	};
+
 	sound {
 		compatible = "audio-graph-card";
 		routing =
@@ -170,26 +189,25 @@
 			sgtl5000_tx_endpoint: endpoint@0 {
 				reg = <0>;
 				remote-endpoint = <&sai2a_endpoint>;
-				frame-master;
-				bitclock-master;
+				frame-master = <&sgtl5000_tx_endpoint>;
+				bitclock-master = <&sgtl5000_tx_endpoint>;
 			};
 
 			sgtl5000_rx_endpoint: endpoint@1 {
 				reg = <1>;
 				remote-endpoint = <&sai2b_endpoint>;
-				frame-master;
-				bitclock-master;
+				frame-master = <&sgtl5000_rx_endpoint>;
+				bitclock-master = <&sgtl5000_rx_endpoint>;
 			};
 		};
 
 	};
 
-	polytouch@38 {
-		compatible = "edt,edt-ft5x06";
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
 		reg = <0x38>;
-		interrupt-parent = <&gpiog>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
-		linux,wakeup;
+		interrupt-parent = <&gpioc>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
 	};
 };
 
@@ -224,7 +242,7 @@
 		sai2a_port: port {
 			sai2a_endpoint: endpoint {
 				remote-endpoint = <&sgtl5000_tx_endpoint>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <512>;
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <16>;
@@ -242,7 +260,7 @@
 		sai2b_port: port {
 			sai2b_endpoint: endpoint {
 				remote-endpoint = <&sgtl5000_rx_endpoint>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <512>;
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <16>;
@@ -269,6 +287,8 @@
 &usart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usart3_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -276,6 +296,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
 	uart-has-rtscts;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
index cd3a1798ca68..abc595350e71 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
@@ -57,22 +57,22 @@
 
 &gpioc {
 	gpio-line-names = "", "", "", "",
-			  "", "", "In1", "",
+			  "", "", "PicoITX-In1", "",
 			  "", "", "", "",
 			  "", "", "", "";
 };
 
 &gpiod {
 	gpio-line-names = "", "", "", "",
-			  "", "", "", "",
-			  "", "", "", "Out1",
-			  "Out2", "", "", "";
+			  "", "", "DHCOM-B", "",
+			  "", "", "", "PicoITX-Out1",
+			  "PicoITX-Out2", "", "", "";
 };
 
 &gpiog {
-	gpio-line-names = "In2", "", "", "",
-			  "", "", "", "",
+	gpio-line-names = "PicoITX-In2", "", "", "",
 			  "", "", "", "",
+			  "DHCOM-L", "", "", "",
 			  "", "", "", "";
 };
 
@@ -105,12 +105,16 @@
 &usart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usart3_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
 &uart8 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 2617815e42a6..c06edd2eacb0 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -12,6 +12,8 @@
 	aliases {
 		ethernet0 = &ethernet0;
 		ethernet1 = &ksz8851;
+		rtc0 = &hwrtc;
+		rtc1 = &rtc;
 	};
 
 	memory@c0000000 {
@@ -92,6 +94,10 @@
 	};
 };
 
+&crc1 {
+	status = "okay";
+};
+
 &dac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
@@ -112,22 +118,28 @@
 
 &ethernet0 {
 	status = "okay";
-	pinctrl-0 = <&ethernet0_rmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;
+	pinctrl-0 = <&ethernet0_rmii_pins_c &mco2_pins_a>;
+	pinctrl-1 = <&ethernet0_rmii_sleep_pins_c &mco2_sleep_pins_a>;
 	pinctrl-names = "default", "sleep";
 	phy-mode = "rmii";
 	max-speed = <100>;
 	phy-handle = <&phy0>;
-	st,eth-ref-clk-sel;
-	phy-reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
 
 		phy0: ethernet-phy@1 {
 			reg = <1>;
+			/* LAN8710Ai */
+			compatible = "ethernet-phy-id0007.c0f0",
+				     "ethernet-phy-ieee802.3-c22";
+			clocks = <&rcc CK_MCO2>;
+			reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			smsc,disable-energy-detect;
 			interrupt-parent = <&gpioi>;
 			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		};
@@ -140,7 +152,7 @@
 	pinctrl-1 = <&fmc_sleep_pins_b>;
 	status = "okay";
 
-	ksz8851: ks8851mll@1,0 {
+	ksz8851: ethernet@1,0 {
 		compatible = "micrel,ks8851-mll";
 		reg = <1 0x0 0x2>, <1 0x2 0x20000>;
 		interrupt-parent = <&gpioc>;
@@ -164,8 +176,67 @@
 	};
 };
 
+&gpioa {
+	gpio-line-names = "", "", "", "",
+			  "", "", "DHCOM-K", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpiob {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "DHCOM-Q", "", "", "",
+			  "", "", "", "";
+};
+
 &gpioc {
-	status = "okay";
+	gpio-line-names = "", "", "", "",
+			  "", "", "DHCOM-E", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpiod {
+	gpio-line-names = "", "", "", "",
+			  "", "", "DHCOM-B", "",
+			  "", "", "", "DHCOM-F",
+			  "DHCOM-D", "", "", "";
+};
+
+&gpioe {
+	gpio-line-names = "", "", "", "",
+			  "", "", "DHCOM-P", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpiof {
+	gpio-line-names = "", "", "", "DHCOM-A",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpiog {
+	gpio-line-names = "DHCOM-C", "", "", "",
+			  "", "", "", "",
+			  "DHCOM-L", "", "", "",
+			  "", "", "", "";
+};
+
+&gpioh {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "DHCOM-N",
+			  "DHCOM-J", "DHCOM-W", "DHCOM-V", "DHCOM-U",
+			  "DHCOM-T", "", "DHCOM-S", "";
+};
+
+&gpioi {
+	gpio-line-names = "DHCOM-G", "DHCOM-O", "DHCOM-H", "DHCOM-I",
+			  "DHCOM-R", "DHCOM-M", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
 };
 
 &i2c4 {
@@ -178,7 +249,7 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 
-	rtc@32 {
+	hwrtc: rtc@32 {
 		compatible = "microcrystal,rv8803";
 		reg = <0x32>;
 	};
@@ -263,8 +334,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -286,7 +355,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -302,7 +370,7 @@
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 
@@ -360,14 +428,18 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
 
-	flash0: mx66l51235l@0 {
+	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;
@@ -377,6 +449,21 @@
 	};
 };
 
+&rcc {
+	/* Connect MCO2 output to ETH_RX_CLK input via pad-pad connection */
+	clocks = <&rcc CK_MCO2>;
+	clock-names = "ETH_RX_CLK/ETH_REF_CLK";
+
+	/*
+	 * Set PLL4P output to 100 MHz to supply SDMMC with faster clock,
+	 * set MCO2 output to 50 MHz to supply ETHRX clock with PLL4P/2,
+	 * so that MCO2 behaves as a divider for the ETHRX clock here.
+	 */
+	assigned-clocks = <&rcc CK_MCO2>, <&rcc PLL4_P>;
+	assigned-clock-parents = <&rcc PLL4_P>;
+	assigned-clock-rates = <50000000>, <100000000>;
+};
+
 &rng1 {
 	status = "okay";
 };
@@ -451,5 +538,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index b09e87fe901a..50af4a27d6be 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -66,7 +66,6 @@
 		led4 {
 			label = "green:user3";
 			gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
 			default-state = "off";
 			panic-indicator;
 		};
@@ -100,7 +99,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpioz 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
@@ -126,6 +125,22 @@
 	};
 };
 
+&dcmi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dcmi_pins_c>;
+	pinctrl-1 = <&dcmi_sleep_pins_c>;
+	status = "disabled";
+
+	port {
+		dcmi_0: endpoint {
+			remote-endpoint = <&stmipi_2>;
+			bus-type = <5>;
+			bus-width = <8>;
+			pclk-sample = <0>;
+		};
+	};
+};
+
 &ethernet0 {
 	status = "okay";
 	pinctrl-0 = <&ethernet0_rgmii_pins_c>;
@@ -135,12 +150,13 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
 		reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
 		reset-delay-us = <1000>;
+		reset-post-delay-us = <1000>;
 
 		phy0: ethernet-phy@7 {
 			reg = <7>;
@@ -162,6 +178,41 @@
 	};
 };
 
+&gpioa {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "AV96-K",
+			  "AV96-I", "", "AV96-A", "";
+};
+
+&gpiob {
+	gpio-line-names = "", "", "", "",
+			  "", "AV96-J", "", "",
+			  "", "", "", "AV96-B",
+			  "", "AV96-L", "", "";
+};
+
+&gpioc {
+	gpio-line-names = "", "", "", "AV96-C",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpiod {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "AV96-D", "", "", "",
+			  "", "", "AV96-E", "AV96-F";
+};
+
+&gpiof {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "AV96-G", "AV96-H", "", "";
+};
+
 &i2c1 {	/* X6 I2C1 */
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins_b>;
@@ -183,10 +234,49 @@
 };
 
 &i2c4 {
+	stmipi: stmipi@14 {
+		compatible = "st,st-mipid02";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&mco1_pins_a>;
+		pinctrl-1 = <&mco1_sleep_pins_a>;
+		reg = <0x14>;
+		clocks = <&rcc CK_MCO1>;
+		clock-names = "xclk";
+		assigned-clocks = <&rcc CK_MCO1>;
+		assigned-clock-parents = <&rcc CK_HSE>;
+		assigned-clock-rates = <24000000>;
+		VDDE-supply = <&v1v8>;
+		VDDIN-supply = <&v1v8>;
+		reset-gpios = <&gpioz 0 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				stmipi_0: endpoint {
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				stmipi_2: endpoint {
+					bus-width = <8>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					pclk-sample = <0>;
+					remote-endpoint = <&dcmi_0>;
+				};
+			};
+		};
+	};
+
 	hdmi-transmitter@3d {
 		compatible = "adi,adv7513";
-		reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
+		reg-names = "main", "edid", "cec", "packet";
 		clocks = <&cec_clock>;
 		clock-names = "cec";
 
@@ -204,8 +294,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
@@ -270,7 +358,7 @@
 		sai2a_port: port {
 			sai2a_endpoint: endpoint {
 				remote-endpoint = <&adv7513_i2s0>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <256>;
 			};
 		};
@@ -343,6 +431,8 @@
 	label = "LS-UART1";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_b>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -352,6 +442,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart7_pins_a>;
 	uart-has-rtscts;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -361,6 +453,8 @@
 	pinctrl-0 = <&usart2_pins_a>;
 	pinctrl-1 = <&usart2_sleep_pins_a>;
 	st,hw-flow-ctrl;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 
 	bluetooth {
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
new file mode 100644
index 000000000000..c32c160f97f2
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		ethernet1 = &ksz8851;
+		mmc0 = &sdmmc1;
+		rtc0 = &hwrtc;
+		rtc1 = &rtc;
+		serial0 = &uart4;
+		serial1 = &uart8;
+		serial2 = &usart3;
+		serial3 = &uart5;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	led {
+		compatible = "gpio-leds";
+		led1 {
+			label = "yellow:user0";
+			gpios = <&gpioz 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "red:user1";
+			gpios = <&gpioz 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	ethernet_vio: vioregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpioh 2 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd>;
+	};
+};
+
+&adc {	/* X11 ADC inputs */
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc12_ain_pins_b>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,adc-channels = <0 1 6>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <0 1 2>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_c>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_c>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <1000>;
+		reset-post-delay-us = <1000>;
+
+		phy0: ethernet-phy@7 {
+			reg = <7>;
+
+			rxc-skew-ps = <1500>;
+			rxdv-skew-ps = <540>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <420>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <420>;
+
+			txc-skew-ps = <1440>;
+			txen-skew-ps = <540>;
+			txd0-skew-ps = <420>;
+			txd1-skew-ps = <420>;
+			txd2-skew-ps = <420>;
+			txd3-skew-ps = <420>;
+		};
+	};
+};
+
+&fmc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&fmc_pins_b>;
+	pinctrl-1 = <&fmc_sleep_pins_b>;
+	status = "okay";
+
+	ksz8851: ethernet@1,0 {
+		compatible = "micrel,ks8851-mll";
+		reg = <1 0x0 0x2>, <1 0x2 0x20000>;
+		interrupt-parent = <&gpioc>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		bank-width = <2>;
+
+		/* Timing values are in nS */
+		st,fmc2-ebi-cs-mux-enable;
+		st,fmc2-ebi-cs-transaction-type = <4>;
+		st,fmc2-ebi-cs-buswidth = <16>;
+		st,fmc2-ebi-cs-address-setup-ns = <5>;
+		st,fmc2-ebi-cs-address-hold-ns = <5>;
+		st,fmc2-ebi-cs-bus-turnaround-ns = <5>;
+		st,fmc2-ebi-cs-data-setup-ns = <45>;
+		st,fmc2-ebi-cs-data-hold-ns = <1>;
+		st,fmc2-ebi-cs-write-address-setup-ns = <5>;
+		st,fmc2-ebi-cs-write-address-hold-ns = <5>;
+		st,fmc2-ebi-cs-write-bus-turnaround-ns = <5>;
+		st,fmc2-ebi-cs-write-data-setup-ns = <45>;
+		st,fmc2-ebi-cs-write-data-hold-ns = <1>;
+	};
+};
+
+&gpioa {
+	gpio-line-names = "", "", "", "",
+			  "DRCC-VAR2", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpioe {
+	gpio-line-names = "", "", "", "",
+			  "", "DRCC-GPIO0", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpiog {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "DRCC-GPIO5", "", "", "";
+};
+
+&gpioh {
+	gpio-line-names = "", "", "", "DRCC-HW2",
+			  "DRCC-GPIO4", "", "", "",
+			  "DRCC-HW1", "DRCC-HW0", "", "DRCC-VAR1",
+			  "DRCC-VAR0", "", "", "DRCC-GPIO6";
+};
+
+&gpioi {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "DRCC-GPIO2",
+			  "", "DRCC-GPIO1", "", "",
+			  "", "", "", "";
+};
+
+&i2c1 {	/* X11 I2C1 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c4 {
+	hwrtc: rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&sdmmc1 {	/* MicroSD */
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&vdd>;
+	vqmmc-supply = <&vdd>;
+	status = "okay";
+};
+
+&sdmmc2 {	/* eMMC */
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd>;
+	status = "okay";
+};
+
+&sdmmc3 {	/* SDIO Wi-Fi */
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_a>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+	broken-cd;
+	bus-width = <4>;
+	mmc-ddr-3_3v;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&spi2 {	/* X11 SPI */
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_b>;
+	cs-gpios = <&gpioi 0 0>;
+	status = "disabled";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&uart4 {
+	label = "UART0";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_d>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart5 {	/* X11 UART */
+	label = "X11-UART5";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart8 {
+	label = "RS485-1";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
+	uart-has-rtscts;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&usart3 {	/* RS485 or RS232 */
+	label = "RS485-2";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&usart3_pins_e>;
+	pinctrl-1 = <&usart3_sleep_pins_e>;
+	uart-has-rtscts;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbh_ohci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "otg";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phy-names = "usb2-phy";
+	phys = <&usbphyc_port1 0>;
+	vbus-supply = <&vbus_otg>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	connector {
+		compatible = "usb-a-connector";
+		vbus-supply = <&vbus_sw>;
+	};
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi
index 75172314d7af..9937b28548c2 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi
@@ -18,6 +18,11 @@
 	};
 };
 
+&vdd {
+	regulator-min-microvolt = <2900000>;
+	regulator-max-microvolt = <2900000>;
+};
+
 &pwr_regulators {
 	vdd-supply = <&vdd_io>;
 };
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
index 803eb8bc9c85..bb40fb46da81 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -19,6 +19,52 @@
 		device_type = "memory";
 		reg = <0xc0000000 0x40000000>;
 	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+	};
+};
+
+&crc1 {
+	status = "okay";
 };
 
 &dts {
@@ -73,8 +119,8 @@
 
 			vdd: buck3 {
 				regulator-name = "vdd";
-				regulator-min-microvolt = <2900000>;
-				regulator-max-microvolt = <2900000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 				regulator-initial-mode = <0>;
 				regulator-over-current-protection;
@@ -175,11 +221,25 @@
 	};
 };
 
+&ipcc {
+	status = "okay";
+};
+
 &iwdg2 {
 	timeout-sec = <32>;
 	status = "okay";
 };
 
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
 &pwr_regulators {
 	vdd-supply = <&vdd>;
 	vdd_3v3_usbfs-supply = <&vdd_usb>;
@@ -187,18 +247,22 @@
 
 &qspi {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
-	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	pinctrl-0 = <&qspi_clk_pins_a
+		     &qspi_bk1_pins_a
+		     &qspi_cs1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a
+		     &qspi_bk1_sleep_pins_a
+		     &qspi_cs1_sleep_pins_a>;
 	reg = <0x58003000 0x1000>, <0x70000000 0x200000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
 
-	flash0: spi-flash@0 {
+	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;
-		spi-max-frequency = <108000000>;
+		spi-max-frequency = <50000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi
new file mode 100644
index 000000000000..5fdb74b652ac
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		serial0 = &uart4;
+		serial1 = &uart7;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sd_switch: regulator-sd_switch {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_switch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+		regulator-always-on;
+
+		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1>,
+			 <2900000 0x0>;
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc12_ain_pins_b>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,adc-channels = <0 1 6>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <0 1 2>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_c>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_c>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <1000>;
+		reset-post-delay-us = <1000>;
+
+		phy0: ethernet-phy@7 {
+			reg = <7>;
+
+			rxc-skew-ps = <1500>;
+			rxdv-skew-ps = <540>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <420>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <420>;
+
+			txc-skew-ps = <1440>;
+			txen-skew-ps = <540>;
+			txd0-skew-ps = <420>;
+			txd1-skew-ps = <420>;
+			txd2-skew-ps = <420>;
+			txd3-skew-ps = <420>;
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
+	cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	vqmmc-supply = <&sd_switch>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_b>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	uart-has-rtscts;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbh_ohci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phy-names = "usb2-phy";
+	phys = <&usbphyc_port1 0>;
+	status = "okay";
+	vbus-supply = <&vbus_otg>;
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 59f18846cf5d..cefeeb00fc22 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -8,6 +8,12 @@
 #include <dt-bindings/mfd/st,stpmic1.h>
 
 / {
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart7;
+	};
+
 	memory@c0000000 {
 		device_type = "memory";
 		reg = <0xc0000000 0x20000000>;
@@ -53,11 +59,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@d4000000 {
-			reg = <0xd4000000 0x4000000>;
-			no-map;
-		};
 	};
 
 	led {
@@ -72,7 +73,7 @@
 
 	sound {
 		compatible = "audio-graph-card";
-		label = "STM32MP1-DK";
+		label = "STM32MP15-DK";
 		routing =
 			"Playback" , "MCLK",
 			"Capture" , "MCLK",
@@ -141,7 +142,7 @@
 	max-speed = <1000>;
 	phy-handle = <&phy0>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -151,10 +152,6 @@
 	};
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-};
-
 &hash1 {
 	status = "okay";
 };
@@ -220,15 +217,15 @@
 			cs42l51_tx_endpoint: endpoint@0 {
 				reg = <0>;
 				remote-endpoint = <&sai2a_endpoint>;
-				frame-master;
-				bitclock-master;
+				frame-master = <&cs42l51_tx_endpoint>;
+				bitclock-master = <&cs42l51_tx_endpoint>;
 			};
 
 			cs42l51_rx_endpoint: endpoint@1 {
 				reg = <1>;
 				remote-endpoint = <&sai2b_endpoint>;
-				frame-master;
-				bitclock-master;
+				frame-master = <&cs42l51_rx_endpoint>;
+				bitclock-master = <&cs42l51_rx_endpoint>;
 			};
 		};
 	};
@@ -249,7 +246,7 @@
 	stusb1600@28 {
 		compatible = "st,stusb1600";
 		reg = <0x28>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpioi>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&stusb1600_pins_a>;
@@ -470,8 +467,8 @@
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
@@ -501,14 +498,12 @@
 	sai2a: audio-controller@4400b004 {
 		#clock-cells = <0>;
 		dma-names = "tx";
-		clocks = <&rcc SAI2_K>;
-		clock-names = "sai_ck";
 		status = "okay";
 
 		sai2a_port: port {
 			sai2a_endpoint: endpoint {
 				remote-endpoint = <&cs42l51_tx_endpoint>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <256>;
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <32>;
@@ -526,7 +521,7 @@
 		sai2b_port: port {
 			sai2b_endpoint: endpoint {
 				remote-endpoint = <&cs42l51_rx_endpoint>;
-				format = "i2s";
+				dai-format = "i2s";
 				mclk-fs = <256>;
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <32>;
@@ -650,6 +645,8 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-1 = <&uart4_sleep_pins_a>;
 	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -658,6 +655,8 @@
 	pinctrl-0 = <&uart7_pins_c>;
 	pinctrl-1 = <&uart7_sleep_pins_c>;
 	pinctrl-2 = <&uart7_idle_pins_c>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "disabled";
 };
 
@@ -673,6 +672,14 @@
 &usbh_ehci {
 	phys = <&usbphyc_port0>;
 	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	/* onboard HUB */
+	hub@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		vdd-supply = <&v3v3>;
+	};
 };
 
 &usbotg_hs {
@@ -694,10 +701,26 @@
 
 &usbphyc_port0 {
 	phy-supply = <&vdd_usb>;
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
 };
 
 &usbphyc_port1 {
 	phy-supply = <&vdd_usb>;
+	st,tune-hs-dc-level = <2>;
+	st,enable-fs-rftime-tuning;
+	st,enable-hs-rftime-reduction;
+	st,trim-hs-current = <15>;
+	st,trim-hs-impedance = <1>;
+	st,tune-squelch-level = <3>;
+	st,tune-hs-rx-offset = <2>;
+	st,no-lsfs-sc;
 };
 
 &vrefbuf {
diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
index 713485a95795..a43965c86fe8 100644
--- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
@@ -50,12 +50,6 @@
 			no-map;
 		};
 	};
-
-	reg_sip_eeprom: regulator_eeprom {
-		compatible = "regulator-fixed";
-		regulator-name = "sip_eeprom";
-		regulator-always-on;
-	};
 };
 
 &i2c4 {
@@ -78,6 +72,7 @@
 			compatible = "st,stpmic1-regulators";
 
 			ldo1-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
 			ldo6-supply = <&v3v3>;
 			pwr_sw1-supply = <&bst_out>;
 
@@ -146,8 +141,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -171,7 +164,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -182,13 +174,13 @@
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 
@@ -206,7 +198,7 @@
 
 	sip_eeprom: eeprom@50 {
 		compatible = "atmel,24c32";
-		vcc-supply = <&reg_sip_eeprom>;
+		vcc-supply = <&vdd>;
 		reg = <0x50>;
 	};
 };
@@ -218,8 +210,8 @@
 &m4_rproc {
 	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
 			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
+	mbox-names = "vq0", "vq1", "shutdown", "detach";
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
index 0a562b2cc5bc..62e7aa587f89 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
@@ -63,7 +63,7 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <20>;
 
-		left-joystick-left {
+		event-left-joystick-left {
 			label = "Left Joystick Left";
 			linux,code = <ABS_X>;
 			linux,input-type = <EV_ABS>;
@@ -71,7 +71,7 @@
 			gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */
 		};
 
-		left-joystick-right {
+		event-left-joystick-right {
 			label = "Left Joystick Right";
 			linux,code = <ABS_X>;
 			linux,input-type = <EV_ABS>;
@@ -79,7 +79,7 @@
 			gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */
 		};
 
-		left-joystick-up {
+		event-left-joystick-up {
 			label = "Left Joystick Up";
 			linux,code = <ABS_Y>;
 			linux,input-type = <EV_ABS>;
@@ -87,7 +87,7 @@
 			gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */
 		};
 
-		left-joystick-down {
+		event-left-joystick-down {
 			label = "Left Joystick Down";
 			linux,code = <ABS_Y>;
 			linux,input-type = <EV_ABS>;
@@ -95,7 +95,7 @@
 			gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */
 		};
 
-		right-joystick-left {
+		event-right-joystick-left {
 			label = "Right Joystick Left";
 			linux,code = <ABS_Z>;
 			linux,input-type = <EV_ABS>;
@@ -103,7 +103,7 @@
 			gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */
 		};
 
-		right-joystick-right {
+		event-right-joystick-right {
 			label = "Right Joystick Right";
 			linux,code = <ABS_Z>;
 			linux,input-type = <EV_ABS>;
@@ -111,7 +111,7 @@
 			gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */
 		};
 
-		right-joystick-up {
+		event-right-joystick-up {
 			label = "Right Joystick Up";
 			linux,code = <ABS_RZ>;
 			linux,input-type = <EV_ABS>;
@@ -119,7 +119,7 @@
 			gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */
 		};
 
-		right-joystick-down {
+		event-right-joystick-down {
 			label = "Right Joystick Down";
 			linux,code = <ABS_RZ>;
 			linux,input-type = <EV_ABS>;
@@ -127,7 +127,7 @@
 			gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */
 		};
 
-		dpad-left {
+		event-dpad-left {
 			label = "DPad Left";
 			linux,code = <ABS_HAT0X>;
 			linux,input-type = <EV_ABS>;
@@ -135,7 +135,7 @@
 			gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */
 		};
 
-		dpad-right {
+		event-dpad-right {
 			label = "DPad Right";
 			linux,code = <ABS_HAT0X>;
 			linux,input-type = <EV_ABS>;
@@ -143,7 +143,7 @@
 			gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */
 		};
 
-		dpad-up {
+		event-dpad-up {
 			label = "DPad Up";
 			linux,code = <ABS_HAT0Y>;
 			linux,input-type = <EV_ABS>;
@@ -151,7 +151,7 @@
 			gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */
 		};
 
-		dpad-down {
+		event-dpad-down {
 			label = "DPad Down";
 			linux,code = <ABS_HAT0Y>;
 			linux,input-type = <EV_ABS>;
@@ -159,49 +159,49 @@
 			gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */
 		};
 
-		x {
+		event-x {
 			label = "Button X";
 			linux,code = <BTN_X>;
 			gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */
 		};
 
-		y {
+		event-y {
 			label = "Button Y";
 			linux,code = <BTN_Y>;
 			gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */
 		};
 
-		a {
+		event-a {
 			label = "Button A";
 			linux,code = <BTN_A>;
 			gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */
 		};
 
-		b {
+		event-b {
 			label = "Button B";
 			linux,code = <BTN_B>;
 			gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */
 		};
 
-		select {
+		event-select {
 			label = "Select Button";
 			linux,code = <BTN_SELECT>;
 			gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */
 		};
 
-		start {
+		event-start {
 			label = "Start Button";
 			linux,code = <BTN_START>;
 			gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */
 		};
 
-		top-left {
+		event-top-left {
 			label = "Top Left Button";
 			linux,code = <BTN_TL>;
 			gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */
 		};
 
-		top-right {
+		event-top-right {
 			label = "Top Right Button";
 			linux,code = <BTN_TR>;
 			gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index ad0e25af45be..83d283cf6633 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -91,12 +91,11 @@
 	/*
 	 * The A10-Lime is known to be unstable when running at 1008 MHz
 	 */
-	operating-points = <
-		/* kHz    uV */
-		912000  1350000
-		864000  1300000
-		624000  1250000
-		>;
+	operating-points =
+		/* kHz	  uV */
+		<912000	1350000>,
+		<864000	1300000>,
+		<624000	1250000>;
 };
 
 &de {
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 1ac82376baef..a332d61fd561 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -77,19 +77,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		back {
+		key-back {
 			label = "Key Back";
 			linux,code = <KEY_BACK>;
 			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
 		};
 
-		home {
+		key-home {
 			label = "Key Home";
 			linux,code = <KEY_HOME>;
 			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
 		};
 
-		menu {
+		key-menu {
 			label = "Key Menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts b/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts
new file mode 100644
index 000000000000..3628f12d2521
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 Pascal Roeleven <dev@pascalroeleven.nl>
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Topwise A721";
+	compatible = "topwise,a721", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_vbat>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		brightness-levels = <0 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	panel {
+		compatible = "starry,kr070pe2t";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_power>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_panel>;
+			};
+		};
+	};
+
+	reg_lcd_power: reg-lcd-power {
+		compatible = "regulator-fixed";
+		regulator-name = "reg-lcd-power";
+		gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+		enable-active-high;
+	};
+
+	reg_vbat: reg-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	accelerometer@4c {
+		compatible = "fsl,mma7660";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-571 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <571428>;
+	};
+
+	button-761 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <761904>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-ph-supply = <&reg_vcc3v3>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 1c5a666c54b5..51a6464aab9a 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -115,13 +115,12 @@
 			reg = <0x0>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000 1400000
-				912000	1350000
-				864000	1300000
-				624000	1250000
-				>;
+				<1008000 1400000>,
+				<912000	1350000>,
+				<864000	1300000>,
+				<624000	1250000>;
 			#cooling-cells = <2>;
 		};
 	};
diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
index 2ce361f8fede..3a6c4bd0a44f 100644
--- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
+++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
@@ -67,18 +67,18 @@
 		compatible = "gpio-leds";
 
 		led-0 {
-			label ="licheepi:red:usr";
+			label = "licheepi:red:usr";
 			gpios = <&pio 2 5 GPIO_ACTIVE_LOW>;
 		};
 
 		led-1 {
-			label ="licheepi:green:usr";
+			label = "licheepi:green:usr";
 			gpios = <&pio 2 19 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
 		led-2 {
-			label ="licheepi:blue:usr";
+			label = "licheepi:blue:usr";
 			gpios = <&pio 2 4 GPIO_ACTIVE_LOW>;
 		};
 
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 7075e10911d5..3325ab07094a 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -102,15 +102,14 @@
 
 &cpu0 {
 	clock-latency = <244144>; /* 8 32k periods */
-	operating-points = <
+	operating-points =
 		/* kHz	  uV */
-		1008000 1400000
-		912000	1350000
-		864000	1300000
-		624000	1200000
-		576000	1200000
-		432000	1200000
-		>;
+		<1008000 1400000>,
+		<912000 1350000>,
+		<864000 1300000>,
+		<624000 1200000>,
+		<576000 1200000>,
+		<432000 1200000>;
 	#cooling-cells = <2>;
 };
 
diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
index a32cde3e32eb..5c3562b85a5b 100644
--- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
+++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
@@ -70,7 +70,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "chip-pro:white:status";
 			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
index 4bf4943d4eb7..fd37bd1f3920 100644
--- a/arch/arm/boot/dts/sun5i-r8-chip.dts
+++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
@@ -70,7 +70,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "chip:white:status";
 			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 486cec6f71e0..236ebfc06192 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -227,7 +227,7 @@
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		x-powers,drive-vbus-en;
 	};
 };
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
index e4f3415e6108..7d2eaaf5c33e 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -116,7 +116,7 @@
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
index 7bd4bdd66a76..83611434270c 100644
--- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
+++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
@@ -116,7 +116,7 @@
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index a75033e85fcb..5cce4918f84c 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -46,6 +46,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 #include <dt-bindings/clock/sun6i-a31-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/reset/sun6i-a31-ccu.h>
 
 / {
@@ -105,13 +106,12 @@
 			reg = <0>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000	1200000
-				864000	1200000
-				720000	1100000
-				480000	1000000
-				>;
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
 			#cooling-cells = <2>;
 		};
 
@@ -121,13 +121,12 @@
 			reg = <1>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000	1200000
-				864000	1200000
-				720000	1100000
-				480000	1000000
-				>;
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
 			#cooling-cells = <2>;
 		};
 
@@ -137,13 +136,12 @@
 			reg = <2>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000	1200000
-				864000	1200000
-				720000	1100000
-				480000	1000000
-				>;
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
 			#cooling-cells = <2>;
 		};
 
@@ -153,13 +151,12 @@
 			reg = <3>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000	1200000
-				864000	1200000
-				720000	1100000
-				480000	1000000
-				>;
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
 			#cooling-cells = <2>;
 		};
 	};
@@ -602,7 +599,7 @@
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun6i-a31-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -611,11 +608,13 @@
 		pio: pinctrl@1c20800 {
 			compatible = "allwinner,sun6i-a31-pinctrl";
 			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -802,6 +801,7 @@
 		lradc: lradc@1c22800 {
 			compatible = "allwinner,sun4i-a10-lradc-keys";
 			reg = <0x01c22800 0x100>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -822,7 +822,7 @@
 			clocks = <&ccu CLK_APB2_UART0>;
 			resets = <&ccu RST_APB2_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -835,7 +835,7 @@
 			clocks = <&ccu CLK_APB2_UART1>;
 			resets = <&ccu RST_APB2_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -848,7 +848,7 @@
 			clocks = <&ccu CLK_APB2_UART2>;
 			resets = <&ccu RST_APB2_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -861,7 +861,7 @@
 			clocks = <&ccu CLK_APB2_UART3>;
 			resets = <&ccu RST_APB2_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -874,7 +874,7 @@
 			clocks = <&ccu CLK_APB2_UART4>;
 			resets = <&ccu RST_APB2_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -887,7 +887,7 @@
 			clocks = <&ccu CLK_APB2_UART5>;
 			resets = <&ccu RST_APB2_UART5>;
 			dmas = <&dma 22>, <&dma 22>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -1299,6 +1299,7 @@
 			#clock-cells = <1>;
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&osc32k>;
@@ -1308,7 +1309,7 @@
 		r_intc: interrupt-controller@1f00c00 {
 			compatible = "allwinner,sun6i-a31-r-intc";
 			interrupt-controller;
-			#interrupt-cells = <2>;
+			#interrupt-cells = <3>;
 			reg = <0x01f00c00 0x400>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
@@ -1320,7 +1321,7 @@
 			ar100: ar100_clk {
 				compatible = "allwinner,sun6i-a31-ar100-clk";
 				#clock-cells = <0>;
-				clocks = <&rtc 0>, <&osc24M>,
+				clocks = <&rtc CLK_OSC32K>, <&osc24M>,
 					 <&ccu CLK_PLL_PERIPH>,
 					 <&ccu CLK_PLL_PERIPH>;
 				clock-output-names = "ar100";
@@ -1355,7 +1356,7 @@
 			ir_clk: ir_clk {
 				#clock-cells = <0>;
 				compatible = "allwinner,sun4i-a10-mod0-clk";
-				clocks = <&rtc 0>, <&osc24M>;
+				clocks = <&rtc CLK_OSC32K>, <&osc24M>;
 				clock-output-names = "ir";
 			};
 
@@ -1383,11 +1384,11 @@
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun6i-a31-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
-			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
index 66bc6ca77afb..b32b70ada7fd 100644
--- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
@@ -159,7 +159,7 @@
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		x-powers,drive-vbus-en;
 	};
 };
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
index 7455c0db4a8a..227ad489731c 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
@@ -79,7 +79,7 @@
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
index 0af48e143b66..56956352914d 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
@@ -67,7 +67,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "sina31s:status:usr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
 		};
diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
index efb25b949f30..96554ab4f6d3 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -149,7 +149,7 @@
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;
 	};
diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
index cadc45255d7b..0b61f5368d44 100644
--- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -99,7 +99,7 @@
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
index 6bf3fbdd738f..f38d19c6be8c 100644
--- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
@@ -80,7 +80,7 @@
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		drivevbus-supply = <&reg_vcc5v0>;
 		x-powers,drive-vbus-en;
 	};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 9d792d7a0f92..46ecf9db2324 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -104,16 +104,15 @@
 
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
-	operating-points = <
+	operating-points =
 		/* kHz	  uV */
-		960000	1400000
-		912000	1400000
-		864000	1350000
-		720000	1250000
-		528000	1150000
-		312000	1100000
-		144000	1050000
-		>;
+		<960000	1400000>,
+		<912000	1400000>,
+		<864000	1350000>,
+		<720000	1250000>,
+		<528000	1150000>,
+		<312000	1100000>,
+		<144000	1050000>;
 };
 
 &de {
diff --git a/arch/arm/boot/dts/sun7i-a20-haoyu-marsboard.dts b/arch/arm/boot/dts/sun7i-a20-haoyu-marsboard.dts
new file mode 100644
index 000000000000..097e479c2772
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-haoyu-marsboard.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Conley Lee
+ * Conley Lee <conleylee@foxmail.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "HAOYU Electronics Marsboard A20";
+	compatible = "haoyu,a20-marsboard", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+	phy-handle = <&phy0>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	gmac_txerr: gmac-txerr-pin {
+		pins = "PA17";
+		function = "gmac";
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 8077f1716fbc..ecb91fb899ff 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -112,7 +112,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index 4f8d55d3ba79..928b86a95f34 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -78,19 +78,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		back {
+		key-back {
 			label = "Key Back";
 			linux,code = <KEY_BACK>;
 			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
 		};
 
-		home {
+		key-home {
 			label = "Key Home";
 			linux,code = <KEY_HOME>;
 			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
 		};
 
-		menu {
+		key-menu {
 			label = "Key Menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 5a40e0280665..5574299685ab 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -106,16 +106,15 @@
 			reg = <0>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				960000	1400000
-				912000	1400000
-				864000	1300000
-				720000	1200000
-				528000	1100000
-				312000	1000000
-				144000	1000000
-				>;
+				<960000	1400000>,
+				<912000	1400000>,
+				<864000	1300000>,
+				<720000	1200000>,
+				<528000	1100000>,
+				<312000	1000000>,
+				<144000	1000000>;
 			#cooling-cells = <2>;
 		};
 
@@ -125,16 +124,15 @@
 			reg = <1>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				960000	1400000
-				912000	1400000
-				864000	1300000
-				720000	1200000
-				528000	1100000
-				312000	1000000
-				144000	1000000
-				>;
+				<960000	1400000>,
+				<912000	1400000>,
+				<864000	1300000>,
+				<720000	1200000>,
+				<528000	1100000>,
+				<312000	1000000>,
+				<144000	1000000>;
 			#cooling-cells = <2>;
 		};
 	};
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index a42fac676b31..4aa9d88c9ea3 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -44,6 +44,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
 #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
 
@@ -329,7 +330,7 @@
 
 		ccu: clock@1c20000 {
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -338,8 +339,10 @@
 		pio: pinctrl@1c20800 {
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
 			/* interrupts get set in SoC specific dtsi file */
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -473,6 +476,7 @@
 		lradc: lradc@1c22800 {
 			compatible = "allwinner,sun4i-a10-lradc-keys";
 			reg = <0x01c22800 0x100>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -486,7 +490,7 @@
 			clocks = <&ccu CLK_BUS_UART0>;
 			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -499,7 +503,7 @@
 			clocks = <&ccu CLK_BUS_UART1>;
 			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -512,7 +516,7 @@
 			clocks = <&ccu CLK_BUS_UART2>;
 			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -525,7 +529,7 @@
 			clocks = <&ccu CLK_BUS_UART3>;
 			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -538,7 +542,7 @@
 			clocks = <&ccu CLK_BUS_UART4>;
 			resets = <&ccu RST_BUS_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -709,6 +713,7 @@
 		rtc: rtc@1f00000 {
 			compatible = "allwinner,sun8i-a23-rtc";
 			reg = <0x01f00000 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			clock-output-names = "osc32k", "osc32k-out";
@@ -719,7 +724,7 @@
 		r_intc: interrupt-controller@1f00c00 {
 			compatible = "allwinner,sun6i-a31-r-intc";
 			interrupt-controller;
-			#interrupt-cells = <2>;
+			#interrupt-cells = <3>;
 			reg = <0x01f00c00 0x400>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
@@ -805,10 +810,10 @@
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun8i-a23-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
-			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
index 8538514c8588..6fee8f133508 100644
--- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
+++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
@@ -99,7 +99,7 @@
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;
 	};
diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
index d54a067fc76e..0c82ff3c7cb4 100644
--- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
@@ -166,7 +166,7 @@
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 7344c37107c6..30fdd2703b1f 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -46,7 +46,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 / {
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -164,7 +164,7 @@
 		io-channels = <&ths>;
 	};
 
-	mali_opp_table: gpu-opp-table {
+	mali_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-144000000 {
@@ -198,7 +198,7 @@
 		};
 
 		link_codec: simple-audio-card,codec {
-			sound-dai = <&codec>;
+			sound-dai = <&codec 0>;
 		};
 	};
 
@@ -238,7 +238,7 @@
 		};
 
 		codec: codec@1c22e00 {
-			#sound-dai-cells = <0>;
+			#sound-dai-cells = <1>;
 			compatible = "allwinner,sun8i-a33-codec";
 			reg = <0x01c22e00 0x400>;
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
@@ -278,6 +278,7 @@
 		dphy: d-phy@1ca1000 {
 			compatible = "allwinner,sun6i-a31-mipi-dphy";
 			reg = <0x01ca1000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_MIPI_DSI>,
 				 <&ccu CLK_DSI_DPHY>;
 			clock-names = "bus", "mod";
diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
index 9c006fc18821..c31c97d16024 100644
--- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -122,7 +122,7 @@
 		compatible = "x-powers,axp818", "x-powers,axp813";
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		swin-supply = <&reg_dcdc1>;
 	};
@@ -142,7 +142,7 @@
 		ac100_rtc: rtc {
 			compatible = "x-powers,ac100-rtc";
 			interrupt-parent = <&r_intc>;
-			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&ac100_codec>;
 			#clock-cells = <1>;
 			clock-output-names = "cko1_rtc",
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index b60016a4429c..8d56b103f063 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -105,6 +105,21 @@
 		/* enables internal regulator and de-asserts reset */
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
 	};
+
+	/*
+	 * Power supply for the SATA disk, behind a USB-SATA bridge.
+	 * Since it is a USB device, there is no consumer in the DT, so we
+	 * have to keep this always on.
+	 */
+	regulator-sata-disk-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "sata-disk-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
+	};
 };
 
 &cpu0 {
@@ -203,7 +218,7 @@
 		compatible = "x-powers,axp813";
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		fldoin-supply = <&reg_dcdc5>;
 		swin-supply = <&reg_dcdc1>;
@@ -225,7 +240,7 @@
 		ac100_rtc: rtc {
 			compatible = "x-powers,ac100-rtc";
 			interrupt-parent = <&r_intc>;
-			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&ac100_codec>;
 			#clock-cells = <1>;
 			clock-output-names = "cko1_rtc",
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index e26af7cf10e0..870993393fc2 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -239,7 +239,7 @@
 		compatible = "x-powers,axp818", "x-powers,axp813";
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		swin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;
@@ -260,7 +260,7 @@
 		ac100_rtc: rtc {
 			compatible = "x-powers,ac100-rtc";
 			interrupt-parent = <&r_intc>;
-			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&ac100_codec>;
 			#clock-cells = <1>;
 			clock-output-names = "cko1_rtc",
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index 83b01b03e08e..a7d4ca308990 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -169,7 +169,7 @@
 	status = "okay";
 
 	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5206";
 		reg = <0x38>;
 		interrupt-parent = <&r_pio>;
 		interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */
@@ -263,7 +263,7 @@
 		compatible = "x-powers,axp813";
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		swin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;
 	};
@@ -283,7 +283,7 @@
 		ac100_rtc: rtc {
 			compatible = "x-powers,ac100-rtc";
 			interrupt-parent = <&r_intc>;
-			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&ac100_codec>;
 			#clock-cells = <1>;
 			clock-output-names = "cko1_rtc",
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index bd898b250e74..82fdb04122ca 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -200,7 +200,7 @@
 		status = "disabled";
 	};
 
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cluster0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -253,7 +253,7 @@
 		};
 	};
 
-	cpu1_opp_table: opp_table1 {
+	cpu1_opp_table: opp-table-cluster1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -708,6 +708,7 @@
 
 		pio: pinctrl@1c20800 {
 			compatible = "allwinner,sun8i-a83t-pinctrl";
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
@@ -1111,7 +1112,7 @@
 			compatible = "allwinner,sun8i-a83t-r-intc",
 				     "allwinner,sun6i-a31-r-intc";
 			interrupt-controller;
-			#interrupt-cells = <2>;
+			#interrupt-cells = <3>;
 			reg = <0x01f00c00 0x400>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
@@ -1147,6 +1148,7 @@
 		r_lradc: lradc@1f03c00 {
 			compatible = "allwinner,sun8i-a83t-r-lradc";
 			reg = <0x01f03c00 0x100>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -1154,6 +1156,7 @@
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun8i-a83t-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
 				 <&osc16Md512>;
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index f3f7a2c912ab..d729b7c705db 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -26,6 +26,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -36,13 +47,14 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "power";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
@@ -94,7 +106,7 @@
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -103,10 +115,24 @@
 	cpu-supply = <&reg_vdd_cpux>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
@@ -155,7 +181,7 @@
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		max-speed = <1500000>;
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index f19ed981da9d..3706216ffb40 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -169,7 +169,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
 	};
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index 62b5280ec093..a6d38ecee141 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -57,6 +57,12 @@
 		ethernet1 = &sdiowifi;
 	};
 
+	cec {
+		compatible = "cec-gpio";
+		cec-gpios = <&pio 0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PA14 */
+		hdmi-phandle = <&hdmi>;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -87,11 +93,15 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
-		clock-names = "ext_clock";
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
 	};
 
 	sound_spdif {
@@ -111,6 +121,13 @@
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
 	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
 };
 
 &de {
diff --git a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts
index ff0a7a952e0c..f5c8ccc5b872 100644
--- a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts
+++ b/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts
@@ -39,16 +39,16 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
 		};
 
-		user {
+		key-user {
 			label = "user";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
index 8e7dfcffe1fb..343b02b97155 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts
@@ -37,10 +37,10 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		k1 {
+		key-0 {
 			label = "k1";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
@@ -57,7 +57,7 @@
 		regulator-ramp-delay = <50>; /* 4ms */
 
 		enable-active-high;
-		enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
 		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 		gpios-states = <0x1>;
 		states = <1100000 0>, <1300000 1>;
@@ -90,7 +90,7 @@
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 
@@ -151,7 +151,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
index be49eabbff94..9e1a33f94cad 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
@@ -103,12 +103,40 @@
 	};
 };
 
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pa_pins>;
 	status = "okay";
 };
 
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
 &usbphy {
 	/* USB VBUS is always on */
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
index 9f33f6fae595..df71fab3cf4e 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
@@ -45,6 +45,10 @@
 / {
 	model = "FriendlyARM NanoPi NEO";
 	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
 };
 
 &ehci0 {
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
index 26e2e6172e0d..42cd1131adf3 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
@@ -46,7 +46,7 @@
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 
@@ -147,7 +147,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
index c7c3e7d8b3c8..cf8413fba6c1 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
@@ -73,14 +73,14 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		input-name = "k1";
 
-		k1 {
+		key-0 {
 			label = "k1";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
index 597c425d08ec..f1f9dbead32a 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -88,19 +88,20 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw2 {
+		switch-2 {
 			label = "sw2";
 			linux,code = <BTN_1>;
 			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
 		};
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
index 6f9c97add54e..305b34a321f5 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
@@ -87,10 +87,10 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 4759ba3f2986..59f6f6d5e7ca 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -86,10 +86,10 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index 5aff8ecc66cb..b96e015f54ee 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -86,13 +86,14 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index 97f497854e05..d05fa679dcd3 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -85,7 +85,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 4e89701df91f..eac2349a2380 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -44,7 +44,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 / {
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -112,7 +112,7 @@
 		};
 	};
 
-	gpu_opp_table: gpu-opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-120000000 {
@@ -245,7 +245,7 @@
 		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
-			thermal-sensors = <&ths 0>;
+			thermal-sensors = <&ths>;
 
 			trips {
 				cpu_hot_trip: cpu-hot {
@@ -282,6 +282,10 @@
 	compatible = "allwinner,sun8i-h3-de2-clk";
 };
 
+&mbus {
+	compatible = "allwinner,sun8i-h3-mbus";
+};
+
 &mmc0 {
 	compatible = "allwinner,sun7i-a20-mmc";
 	clocks = <&ccu CLK_BUS_MMC0>,
diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
index 293016d081cd..bc394686fedb 100644
--- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
+++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
@@ -91,7 +91,7 @@
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -164,7 +164,7 @@
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;
 	};
@@ -283,7 +283,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_dldo1>;
 		vddio-supply = <&reg_aldo3>;
diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts
index 2be1b76fe2f6..95543a9c2118 100644
--- a/arch/arm/boot/dts/sun8i-r16-parrot.dts
+++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts
@@ -165,7 +165,7 @@
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		drivevbus-supply = <&reg_vcc5v0>;
 		x-powers,drive-vbus-en;
 	};
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index a6a1087a0c9b..28197bbcb1d5 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -43,6 +43,7 @@
 
 /dts-v1/;
 #include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -113,6 +114,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-r40-cpu-opp.dtsi b/arch/arm/boot/dts/sun8i-r40-cpu-opp.dtsi
new file mode 100644
index 000000000000..649928b361af
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r40-cpu-opp.dtsi
@@ -0,0 +1,52 @@
+/{
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1000000 1000000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1100000 1100000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1160000 1160000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1240000 1240000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1300000 1300000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
diff --git a/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
new file mode 100644
index 000000000000..9f39b5a2bb35
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r40-feta40i.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// Copyright (C) 2021 Ivan Uvarov <i.uvarov@cognitivepilot.com>
+// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is:
+//  Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+//  Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_aldo2>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_aldo2>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pf-supply = <&reg_dldo4>;
+	vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
diff --git a/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts b/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
new file mode 100644
index 000000000000..0bd1336206b8
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// Copyright (C) 2021 Ivan Uvarov <i.uvarov@cognitivepilot.com>
+// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is:
+//	Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+//	Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+/dts-v1/;
+#include "sun8i-r40-feta40i.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Forlinx OKA40i-C";
+	compatible = "forlinx,oka40i-c", "forlinx,feta40i-c", "allwinner,sun8i-r40";
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5; /* RS485 */
+		serial7 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5 { /* this is how the leds are labeled on the board */
+			gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led-6 {
+			gpios = <&pio 8 15 GPIO_ACTIVE_LOW>; /* PI15 */
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo2>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 11 GPIO_ACTIVE_LOW>; // PI11
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 10 GPIO_ACTIVE_LOW>; // PI10
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_rts_cts_pi_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pg_pins>;
+	status = "okay";
+};
+
+&uart5 { /* RS485 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index d5ad3b9efd12..4ef26d8f5340 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -42,6 +42,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-r40-ccu.h>
 #include <dt-bindings/clock/sun8i-tcon-top.h>
@@ -84,24 +85,36 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -117,6 +130,30 @@
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		gpu_thermal: gpu-thermal {
@@ -357,6 +394,8 @@
 			clock-names = "ahb", "mmc";
 			resets = <&ccu RST_BUS_MMC3>;
 			reset-names = "ahb";
+			pinctrl-0 = <&mmc3_pins>;
+			pinctrl-names = "default";
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			#address-cells = <1>;
@@ -483,7 +522,7 @@
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun8i-r40-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -502,13 +541,24 @@
 			compatible = "allwinner,sun8i-r40-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
+			can_ph_pins: can-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			can_pa_pins: can-pa-pins {
+				pins = "PA16", "PA17";
+				function = "can";
+			};
+
 			clk_out_a_pin: clk-out-a-pin {
 				pins = "PI12";
 				function = "clk_out_a";
@@ -602,6 +652,15 @@
 			};
 
 			/omit-if-no-ref/
+			mmc3_pins: mmc3-pins {
+				pins = "PI4", "PI5", "PI6",
+				       "PI7", "PI8", "PI9";
+				function = "mmc3";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
 			spi0_pc_pins: spi0-pc-pins {
 				pins = "PC0", "PC1", "PC2";
 				function = "spi0";
@@ -631,20 +690,65 @@
 				function = "spi1";
 			};
 
+			/omit-if-no-ref/
 			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB22", "PB23";
 				function = "uart0";
 			};
 
+			/omit-if-no-ref/
+			uart2_pi_pins: uart2-pi-pins {
+				pins = "PI18", "PI19";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{
+				pins = "PI16", "PI17";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
 			uart3_pg_pins: uart3-pg-pins {
 				pins = "PG6", "PG7";
 				function = "uart3";
 			};
 
+			/omit-if-no-ref/
 			uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
 				pins = "PG8", "PG9";
 				function = "uart3";
 			};
+
+			/omit-if-no-ref/
+			uart4_pg_pins: uart4-pg-pins {
+				pins = "PG10", "PG11";
+				function = "uart4";
+			};
+
+			/omit-if-no-ref/
+			uart5_ph_pins: uart5-ph-pins {
+				pins = "PH6", "PH7";
+				function = "uart5";
+			};
+
+			/omit-if-no-ref/
+			uart7_pi_pins: uart7-pi-pins {
+				pins = "PI20", "PI21";
+				function = "uart7";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 		};
 
 		wdt: watchdog@1c20c90 {
@@ -680,6 +784,45 @@
 			status = "disabled";
 		};
 
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S0>;
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S1>;
+			dmas = <&dma 4>, <&dma 4>;
+			dma-names = "rx", "tx";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S2>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+		};
+
 		ths: thermal-sensor@1c24c00 {
 			compatible = "allwinner,sun8i-r40-ths";
 			reg = <0x01c24c00 0x100>;
@@ -831,6 +974,15 @@
 			#size-cells = <0>;
 		};
 
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun8i-r40-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CAN>;
+			resets = <&ccu RST_BUS_CAN>;
+			status = "disabled";
+		};
+
 		i2c4: i2c@1c2c000 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2c000 0x400>;
@@ -1117,8 +1269,8 @@
 			reg-io-width = <1>;
 			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
-				 <&ccu CLK_HDMI>;
-			clock-names = "iahb", "isfr", "tmds";
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
 			phys = <&hdmi_phy>;
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
index 797d61cff11e..872d56caa9ce 100644
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -94,7 +94,7 @@
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		drivevbus-supply = <&reg_vcc5v0>;
 		x-powers,drive-vbus-en;
diff --git a/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts b/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts
new file mode 100644
index 000000000000..94e24b5926dd
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+
+#include "sun8i-t113s.dtsi"
+#include "sunxi-d1s-t113-mangopi-mq-r.dtsi"
+
+/ {
+	model = "MangoPi MQ-R-T113";
+	compatible = "widora,mangopi-mq-r-t113", "allwinner,sun8i-t113s";
+
+	aliases {
+		ethernet0 = &rtl8189ftv;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&mmc1 {
+	rtl8189ftv: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 = WL_WAKE_AP */
+		interrupt-names = "host-wake";
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-t113s.dtsi b/arch/arm/boot/dts/sun8i-t113s.dtsi
new file mode 100644
index 000000000000..804aa197a24f
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-t113s.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#define SOC_PERIPHERAL_IRQ(nr) GIC_SPI nr
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <riscv/allwinner/sunxi-d1s-t113.dtsi>
+#include <riscv/allwinner/sunxi-d1-t113.dtsi>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+		};
+	};
+
+	gic: interrupt-controller@1c81000 {
+		compatible = "arm,gic-400";
+		reg = <0x03021000 0x1000>,
+		      <0x03022000 0x2000>,
+		      <0x03024000 0x2000>,
+		      <0x03026000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
index 6931aaab2382..9f472521f4a4 100644
--- a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
+++ b/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
@@ -45,6 +45,7 @@
 
 /dts-v1/;
 #include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -88,6 +89,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-v3-sl631.dtsi b/arch/arm/boot/dts/sun8i-v3-sl631.dtsi
index e0d2a31efc7f..6f93f8c49f84 100644
--- a/arch/arm/boot/dts/sun8i-v3-sl631.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3-sl631.dtsi
@@ -115,7 +115,7 @@
 &spi0 {
 	status = "okay";
 
-	spi-flash@0 {
+	flash@0 {
 		reg = <0>;
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi
index c279e13583ba..186c30cbe6ee 100644
--- a/arch/arm/boot/dts/sun8i-v3.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3.dtsi
@@ -1,14 +1,40 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
  */
 
 #include "sun8i-v3s.dtsi"
 
+/ {
+	soc {
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-v3-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_pins>;
+			resets = <&ccu RST_BUS_I2S0>;
+			status = "disabled";
+		};
+	};
+};
+
 &ccu {
 	compatible = "allwinner,sun8i-v3-ccu";
 };
 
+&codec_analog {
+	compatible = "allwinner,sun8i-v3-codec-analog",
+		     "allwinner,sun8i-h3-codec-analog";
+};
+
 &emac {
 	/delete-property/ phy-handle;
 	/delete-property/ phy-mode;
@@ -25,6 +51,11 @@
 &pio {
 	compatible = "allwinner,sun8i-v3-pinctrl";
 
+	i2s0_pins: i2s0-pins {
+		pins = "PG10", "PG11", "PG12", "PG13";
+		function = "i2s";
+	};
+
 	uart1_pg_pins: uart1-pg-pins {
 		pins = "PG6", "PG7";
 		function = "uart1";
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
index db5cd0b8574b..752ad05c8f83 100644
--- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
+++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
@@ -49,16 +49,18 @@
 	compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero",
 		     "allwinner,sun8i-v3s";
 
+	aliases {
+		ethernet0 = &emac;
+	};
+
 	leds {
 		/* The LEDs use PG0~2 pins, which conflict with MMC1 */
 		status = "disabled";
 	};
 };
 
-&mmc1 {
-	broken-cd;
-	bus-width = <4>;
-	vmmc-supply = <&reg_vcc3v3>;
+&emac {
+	allwinner,leds-active-low;
 	status = "okay";
 };
 
@@ -94,3 +96,10 @@
 		voltage = <800000>;
 	};
 };
+
+&mmc1 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index eb4cb63fef13..b001251644f7 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -41,6 +42,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-v3s-ccu.h>
 #include <dt-bindings/reset/sun8i-v3s-ccu.h>
 #include <dt-bindings/clock/sun8i-de2.h>
@@ -172,6 +174,15 @@
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-v3s-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
 		tcon0: lcd-controller@1c0c000 {
 			compatible = "allwinner,sun8i-v3s-tcon";
 			reg = <0x01c0c000 0x1000>;
@@ -275,6 +286,8 @@
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 16>, <&dma 16>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_CE>;
 			reset-names = "ahb";
 		};
@@ -309,7 +322,7 @@
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun8i-v3s-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -330,7 +343,8 @@
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -422,6 +436,15 @@
 			clocks = <&osc24M>;
 		};
 
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun8i-v3s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21400 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		lradc: lradc@1c22800 {
 			compatible = "allwinner,sun4i-a10-lradc-keys";
 			reg = <0x01c22800 0x400>;
@@ -429,6 +452,25 @@
 			status = "disabled";
 		};
 
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-v3s-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+
+		codec_analog: codec-analog@1c23000 {
+			compatible = "allwinner,sun8i-v3s-codec-analog";
+			reg = <0x01c23000 0x4>;
+		};
+
 		uart0: serial@1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
@@ -436,6 +478,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
@@ -447,6 +491,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
@@ -458,6 +504,8 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "tx", "rx";
 			resets = <&ccu RST_BUS_UART2>;
 			pinctrl-0 = <&uart2_pins>;
 			pinctrl-names = "default";
@@ -537,6 +585,8 @@
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi0_pins>;
 			resets = <&ccu RST_BUS_SPI0>;
@@ -545,6 +595,17 @@
 			#size-cells = <0>;
 		};
 
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
 		csi1: camera@1cb4000 {
 			compatible = "allwinner,sun8i-v3s-csi";
 			reg = <0x01cb4000 0x3000>;
@@ -556,16 +617,5 @@
 			resets = <&ccu RST_BUS_CSI>;
 			status = "disabled";
 		};
-
-		gic: interrupt-controller@1c81000 {
-			compatible = "arm,gic-400";
-			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x2000>,
-			      <0x01c84000 0x2000>,
-			      <0x01c86000 0x2000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index 47954551f573..434871040aca 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -42,6 +42,7 @@
 
 /dts-v1/;
 #include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -107,6 +108,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 1fe251ea94bc..c8ca8cb7f5c9 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -87,7 +87,7 @@
 	};
 
 	vga-dac {
-		compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac";
+		compatible = "corpro,gm7123", "adi,adv7123";
 		vdd-supply = <&reg_dcdc1>;
 
 		ports {
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index ce4fa6706d06..7d3f3300f431 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -1218,7 +1218,6 @@
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
-			resets = <&apbs_rst 0>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
index a1154e6c7cb5..43896723a994 100644
--- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
+++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
@@ -6,17 +6,54 @@
 /dts-v1/;
 #include "suniv-f1c100s.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	model = "Lichee Pi Nano";
 	compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
 
 	aliases {
+		mmc0 = &mmc0;
 		serial0 = &uart0;
+		spi0 = &spi0;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&otg_sram {
+	status = "okay";
 };
 
 &uart0 {
@@ -24,3 +61,13 @@
 	pinctrl-0 = <&uart0_pe_pins>;
 	status = "okay";
 };
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
index 6100d3b75f61..3c61d59ab5f8 100644
--- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -4,6 +4,9 @@
  * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
  */
 
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -26,9 +29,13 @@
 	};
 
 	cpus {
-		cpu {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
 			compatible = "arm,arm926ej-s";
 			device_type = "cpu";
+			reg = <0x0>;
 		};
 	};
 
@@ -62,6 +69,96 @@
 			};
 		};
 
+		spi0: spi@1c05000 {
+			compatible = "allwinner,suniv-f1c100s-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,suniv-f1c100s-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,suniv-f1c100s-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <23>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,suniv-f1c100s-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <24>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,suniv-f1c100s-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <26>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,suniv-f1c100s-usb-phy";
+			reg = <0x01c13400 0x10>;
+			reg-names = "phy_ctrl";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
 		ccu: clock@1c20000 {
 			compatible = "allwinner,suniv-f1c100s-ccu";
 			reg = <0x01c20000 0x400>;
@@ -82,30 +179,119 @@
 			compatible = "allwinner,suniv-f1c100s-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <38>, <39>, <40>;
-			clocks = <&ccu 37>, <&osc24M>, <&osc32k>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+			};
+
+			/omit-if-no-ref/
+			i2c0_pd_pins: i2c0-pd-pins {
+				pins = "PD0", "PD12";
+				function = "i2c0";
+			};
+
+			spi0_pc_pins: spi0-pc-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+
 			uart0_pe_pins: uart0-pe-pins {
 				pins = "PE0", "PE1";
 				function = "uart0";
 			};
+
+			/omit-if-no-ref/
+			uart1_pa_pins: uart1-pa-pins {
+				pins = "PA2", "PA3";
+				function = "uart1";
+			};
+		};
+
+		i2c0: i2c@1c27000 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27000 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@1c27400 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27400 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1c27800 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27800 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		timer@1c20c00 {
 			compatible = "allwinner,suniv-f1c100s-timer";
 			reg = <0x01c20c00 0x90>;
-			interrupts = <13>;
+			interrupts = <13>, <14>, <15>;
 			clocks = <&osc24M>;
 		};
 
 		wdt: watchdog@1c20ca0 {
 			compatible = "allwinner,suniv-f1c100s-wdt",
-				     "allwinner,sun4i-a10-wdt";
+				     "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
+			interrupts = <16>;
+			clocks = <&osc32k>;
+		};
+
+		pwm: pwm@1c21000 {
+			compatible = "allwinner,suniv-f1c100s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21000 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		ir: ir@1c22c00 {
+			compatible = "allwinner,suniv-f1c100s-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c22c00 0x400>;
+			clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&ccu RST_BUS_IR>;
+			interrupts = <6>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c23400 {
+			compatible = "allwinner,suniv-f1c100s-lradc",
+				     "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01c23400 0x400>;
+			interrupts = <22>;
+			status = "disabled";
 		};
 
 		uart0: serial@1c25000 {
@@ -114,8 +300,8 @@
 			interrupts = <1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 38>;
-			resets = <&ccu 24>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
 
@@ -125,8 +311,8 @@
 			interrupts = <2>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 39>;
-			resets = <&ccu 25>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
 
@@ -136,8 +322,8 @@
 			interrupts = <3>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 40>;
-			resets = <&ccu 26>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts
new file mode 100644
index 000000000000..2d2a3f026df3
--- /dev/null
+++ b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Arm Ltd,
+ * based on work:
+ *   Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lctech Pi F1C200s";
+	compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s",
+		     "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pa_pins>;
+	status = "okay";
+};
+
+/*
+ * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected
+ * to Vin, which supplies the board. Host mode works (if the board is powered
+ * otherwise), but peripheral is probably the intention.
+ */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts b/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts
new file mode 100644
index 000000000000..184c245041a6
--- /dev/null
+++ b/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Popcorn Computer PopStick v1.1";
+	compatible = "sourceparts,popstick-v1.1", "sourceparts,popstick",
+		     "allwinner,suniv-f1c200s", "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pe_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi b/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi
new file mode 100644
index 000000000000..493d32357e4e
--- /dev/null
+++ b/arch/arm/boot/dts/sunplus-sp7021-achip.dtsi
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Sunplus SP7021
+ *
+ * Copyright (C) 2021 Sunplus Technology Co.
+ */
+
+#include "sunplus-sp7021.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "sunplus,sp7021-achip", "sunplus,sp7021";
+	model = "Sunplus SP7021 (CA7)";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <931000000>;
+		};
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clock-frequency = <931000000>;
+		};
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clock-frequency = <931000000>;
+		};
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clock-frequency = <931000000>;
+		};
+	};
+
+	gic: interrupt-controller@9f101000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x9f101000 0x1000>,
+		      <0x9f102000 0x2000>,
+		      <0x9f104000 0x2000>,
+		      <0x9f106000 0x2000>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <XTAL>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	soc@9c000000 {
+		intc: interrupt-controller@780 {
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, /* EXT_INT0 */
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; /* EXT_INT1 */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts b/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts
new file mode 100644
index 000000000000..d5c5ffc20565
--- /dev/null
+++ b/arch/arm/boot/dts/sunplus-sp7021-demo-v3.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Sunplus SP7021 Demo V3 SBC board
+ *
+ * Copyright (C) Sunplus Technology Co.
+ */
+
+/dts-v1/;
+
+#include "sunplus-sp7021-achip.dtsi"
+
+/ {
+	compatible = "sunplus,sp7021-demo-v3", "sunplus,sp7021";
+	model = "Sunplus SP7021/CA7/Demo_V3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/sunplus-sp7021.dtsi b/arch/arm/boot/dts/sunplus-sp7021.dtsi
new file mode 100644
index 000000000000..ae9bbe0320b8
--- /dev/null
+++ b/arch/arm/boot/dts/sunplus-sp7021.dtsi
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Sunplus SP7021
+ *
+ * Copyright (C) 2021 Sunplus Technology Co.
+ */
+
+#include <dt-bindings/clock/sunplus,sp7021-clkc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/reset/sunplus,sp7021-reset.h>
+#include <dt-bindings/pinctrl/sppctl-sp7021.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#define XTAL	27000000
+
+/ {
+	compatible = "sunplus,sp7021";
+	model = "Sunplus SP7021";
+
+	clocks {
+		extclk: osc0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <XTAL>;
+			clock-output-names = "extclk";
+		};
+	};
+
+	soc@9c000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x9c000000 0x400000>;
+		interrupt-parent = <&intc>;
+
+		clkc: clock-controller@4 {
+			compatible = "sunplus,sp7021-clkc";
+			reg = <0x4 0x28>,
+			      <0x200 0x44>,
+			      <0x268 0x04>;
+			clocks = <&extclk>;
+			#clock-cells = <1>;
+		};
+
+		intc: interrupt-controller@780 {
+			compatible = "sunplus,sp7021-intc";
+			reg = <0x780 0x80>, <0xa80 0x80>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		otp: otp@af00 {
+			compatible = "sunplus,sp7021-ocotp";
+			reg = <0xaf00 0x34>, <0xaf80 0x58>;
+			reg-names = "hb_gpio", "otprx";
+			clocks = <&clkc CLK_OTPRX>;
+			resets = <&rstc RST_OTPRX>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			therm_calib: thermal-calibration@14 {
+				reg = <0x14 0x3>;
+			};
+			disc_vol: disconnect-voltage@18 {
+				reg = <0x18 0x2>;
+			};
+			mac_addr0: mac-address0@34 {
+				reg = <0x34 0x6>;
+			};
+			mac_addr1: mac-address1@3a {
+				reg = <0x3a 0x6>;
+			};
+		};
+
+		pctl: pinctrl@100 {
+			compatible = "sunplus,sp7021-pctl";
+			reg = <0x100 0x100>,
+			      <0x300 0x100>,
+			      <0x32e4 0x1C>,
+			      <0x80 0x20>;
+			reg-names = "moon2", "gpioxt", "first", "moon1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			clocks = <&clkc CLK_GPIO>;
+			resets = <&rstc RST_GPIO>;
+
+			emac_pins: pinmux-emac-pins {
+				sunplus,pins = <
+					SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0)
+					SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0)
+					SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0)
+					SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0)
+					SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0)
+					SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0)
+					SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0)
+					SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0)
+					SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0)
+					SPPCTL_IOPAD(45,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXER,0)
+					SPPCTL_IOPAD(59,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXEN,0)
+					SPPCTL_IOPAD(57,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD0,0)
+					SPPCTL_IOPAD(58,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_TXD1,0)
+					SPPCTL_IOPAD(54,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_CRSDV,0)
+					SPPCTL_IOPAD(55,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD0,0)
+					SPPCTL_IOPAD(56,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXD1,0)
+					SPPCTL_IOPAD(53,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P1_MAC_RMII_RXER,0)
+				>;
+				sunplus,zerofunc = <
+					MUXF_L2SW_LED_FLASH0
+					MUXF_L2SW_LED_FLASH1
+					MUXF_L2SW_LED_ON0
+					MUXF_L2SW_LED_ON1
+					MUXF_DAISY_MODE
+				>;
+			};
+
+			emmc_pins: pinmux-emmc-pins {
+				function = "CARD0_EMMC";
+				groups = "CARD0_EMMC";
+			};
+
+			leds_pins: pinmux-leds-pins {
+				sunplus,pins = < SPPCTL_IOPAD(0,SPPCTL_PCTL_G_GPIO,0,SPPCTL_PCTL_L_OUT) >;
+			};
+
+			sdcard_pins: pinmux-sdcard-pins {
+				function = "SD_CARD";
+				groups = "SD_CARD";
+				sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >;
+			};
+
+			spi0_pins: pinmux-spi0-pins {
+				sunplus,pins = <
+					SPPCTL_IOPAD(26,SPPCTL_PCTL_G_GPIO,0,0)
+					SPPCTL_IOPAD(28,SPPCTL_PCTL_G_GPIO,0,0)
+					SPPCTL_IOPAD(23,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_DO,0)
+					SPPCTL_IOPAD(25,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_DI,0)
+					SPPCTL_IOPAD(27,SPPCTL_PCTL_G_PMUX,MUXF_SPI0S_CLK,0)
+				>;
+			};
+
+			uart0_pins: pinmux-uart0-pins {
+				function = "UA0";
+				groups = "UA0";
+			};
+
+			uart1_pins: pinmux-uart1-pins {
+				sunplus,pins = <
+					SPPCTL_IOPAD(14,SPPCTL_PCTL_G_PMUX,MUXF_UA4_TX,0)
+					SPPCTL_IOPAD(16,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RX,0)
+				>;
+			};
+
+			uart2_pins: pinmux-uart2-pins {
+				sunplus,pins = <
+					SPPCTL_IOPAD(16,SPPCTL_PCTL_G_PMUX,MUXF_UA2_TX,0)
+					SPPCTL_IOPAD(17,SPPCTL_PCTL_G_PMUX,MUXF_UA2_RX,0)
+					SPPCTL_IOPAD(18,SPPCTL_PCTL_G_PMUX,MUXF_UA2_RTS,0)
+					SPPCTL_IOPAD(19,SPPCTL_PCTL_G_PMUX,MUXF_UA2_CTS,0)
+				>;
+			};
+
+			uart4_pins: pinmux-uart4-pins {
+				sunplus,pins = <
+					SPPCTL_IOPAD(22,SPPCTL_PCTL_G_PMUX,MUXF_UA4_TX,0)
+					SPPCTL_IOPAD(20,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RX,0)
+					SPPCTL_IOPAD(23,SPPCTL_PCTL_G_PMUX,MUXF_UA4_RTS,0)
+					SPPCTL_IOPAD(21,SPPCTL_PCTL_G_PMUX,MUXF_UA4_CTS,0)
+				>;
+			};
+		};
+
+		rstc: reset@54 {
+			compatible = "sunplus,sp7021-reset";
+			reg = <0x54 0x28>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@3a00 {
+			compatible = "sunplus,sp7021-rtc";
+			reg = <0x3a00 0x80>;
+			reg-names = "rtc";
+			clocks = <&clkc CLK_RTC>;
+			resets = <&rstc RST_RTC>;
+			interrupts = <163 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		spi_controller0: spi@2d80 {
+			compatible = "sunplus,sp7021-spi";
+			reg = <0x2d80 0x80>, <0x2e00 0x80>;
+			reg-names = "master", "slave";
+			interrupts = <144 IRQ_TYPE_LEVEL_HIGH>,
+				     <146 IRQ_TYPE_LEVEL_HIGH>,
+				     <145 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma_w", "master_risc", "slave_risc";
+			clocks = <&clkc CLK_SPI_COMBO_0>;
+			resets = <&rstc RST_SPI_COMBO_0>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			cs-gpios = <&pctl 26 GPIO_ACTIVE_LOW>,
+				   <&pctl 28 GPIO_ACTIVE_LOW>;
+		};
+
+		spi_controller1: spi@f480 {
+			compatible = "sunplus,sp7021-spi";
+			reg = <0xf480 0x80>, <0xf500 0x80>;
+			reg-names = "master", "slave";
+			interrupts = <67 IRQ_TYPE_LEVEL_HIGH>,
+				     <69 IRQ_TYPE_LEVEL_HIGH>,
+				     <68 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma_w", "master_risc", "slave_risc";
+			clocks = <&clkc CLK_SPI_COMBO_1>;
+			resets = <&rstc RST_SPI_COMBO_1>;
+			status = "disabled";
+		};
+
+		spi_controller2: spi@f600 {
+			compatible = "sunplus,sp7021-spi";
+			reg = <0xf600 0x80>, <0xf680 0x80>;
+			reg-names = "master", "slave";
+			interrupts = <70 IRQ_TYPE_LEVEL_HIGH>,
+				     <72 IRQ_TYPE_LEVEL_HIGH>,
+				     <71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma_w", "master_risc", "slave_risc";
+			clocks = <&clkc CLK_SPI_COMBO_2>;
+			resets = <&rstc RST_SPI_COMBO_2>;
+			status = "disabled";
+		};
+
+		spi_controller3: spi@f780 {
+			compatible = "sunplus,sp7021-spi";
+			reg = <0xf780 0x80>, <0xf800 0x80>;
+			reg-names = "master", "slave";
+			interrupts = <73 IRQ_TYPE_LEVEL_HIGH>,
+				     <75 IRQ_TYPE_LEVEL_HIGH>,
+				     <74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma_w", "master_risc", "slave_risc";
+			clocks = <&clkc CLK_SPI_COMBO_3>;
+			resets = <&rstc RST_SPI_COMBO_3>;
+			status = "disabled";
+		};
+
+		uart0: serial@900 {
+			compatible = "sunplus,sp7021-uart";
+			reg = <0x900 0x80>;
+			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLK_UA0>;
+			resets = <&rstc RST_UA0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+		};
+
+		uart1: serial@980 {
+			compatible = "sunplus,sp7021-uart";
+			reg = <0x980 0x80>;
+			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLK_UA1>;
+			resets = <&rstc RST_UA1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins>;
+			status = "disabled";
+		};
+
+		uart2: serial@800 {
+			compatible = "sunplus,sp7021-uart";
+			reg = <0x800 0x80>;
+			interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLK_UA2>;
+			resets = <&rstc RST_UA2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pins>;
+			status = "disabled";
+		};
+
+		uart3: serial@880 {
+			compatible = "sunplus,sp7021-uart";
+			reg = <0x880 0x80>;
+			interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLK_UA3>;
+			resets = <&rstc RST_UA3>;
+			status = "disabled";
+		};
+
+		uart4: serial@8780 {
+			compatible = "sunplus,sp7021-uart";
+			reg = <0x8780 0x80>;
+			interrupts = <134 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLK_UA4>;
+			resets = <&rstc RST_UA4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart4_pins>;
+			status = "disabled";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+		system-led {
+			label = "system-led";
+			gpios = <&pctl 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
index 7a6af54dd342..1d1d127cf38f 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
@@ -77,30 +77,31 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "power";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
 	reg_gmac_3v3: gmac-3v3 {
-		      compatible = "regulator-fixed";
-		      regulator-name = "gmac-3v3";
-		      regulator-min-microvolt = <3300000>;
-		      regulator-max-microvolt = <3300000>;
-		      startup-delay-us = <100000>;
-		      enable-active-high;
-		      gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
 	};
 
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -220,7 +221,7 @@
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		max-speed = <1500000>;
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi b/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi
new file mode 100644
index 000000000000..e9bc749488bb
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Arm Ltd.
+/*
+ * Common peripherals and configurations for MangoPi MQ-R boards.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */
+		};
+	};
+
+	/* board wide 5V supply directly from the USB-C socket */
+	reg_vcc5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	/* SY8008 DC/DC regulator on the board */
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	/* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+	reg_vcc_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	/* XC6206 LDO on the board */
+	reg_avdd2v8: regulator-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_3v3>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+	};
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3v3>;
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_3v3>;
+	vcc-pd-supply = <&reg_3v3>;
+	vcc-pe-supply = <&reg_avdd2v8>;
+	vcc-pf-supply = <&reg_3v3>;
+	vcc-pg-supply = <&reg_3v3>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pb_pins>;
+	status = "okay";
+};
+
+/* The USB-C socket has its CC pins pulled to GND, so is hardwired as a UFP. */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
index fc67e30fe212..60804b0e6c56 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5-emlid-neutis.dtsi
@@ -22,7 +22,7 @@
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
 		post-power-on-delay-ms = <200>;
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -124,7 +124,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 9be13378d4df..ade1cd50e445 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -40,6 +40,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-h3-ccu.h>
 #include <dt-bindings/clock/sun8i-r-ccu.h>
@@ -301,6 +302,8 @@
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -311,6 +314,8 @@
 			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
 				 <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -386,7 +391,7 @@
 		ccu: clock@1c20000 {
 			/* compatible is in per SoC .dtsi file */
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -395,9 +400,11 @@
 		pio: pinctrl@1c20800 {
 			/* compatible is in per SoC .dtsi file */
 			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -567,9 +574,14 @@
 		};
 
 		mbus: dram-controller@1c62000 {
-			compatible = "allwinner,sun8i-h3-mbus";
-			reg = <0x01c62000 0x1000>;
-			clocks = <&ccu CLK_MBUS>;
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c62000 0x1000>,
+			      <0x01c63000 0x1000>;
+			reg-names = "mbus", "dram";
+			clocks = <&ccu CLK_MBUS>,
+				 <&ccu CLK_DRAM>,
+				 <&ccu CLK_BUS_DRAM>;
+			clock-names = "mbus", "dram", "bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
@@ -698,7 +710,7 @@
 			clocks = <&ccu CLK_BUS_UART0>;
 			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -711,7 +723,7 @@
 			clocks = <&ccu CLK_BUS_UART1>;
 			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -724,7 +736,7 @@
 			clocks = <&ccu CLK_BUS_UART2>;
 			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -737,7 +749,7 @@
 			clocks = <&ccu CLK_BUS_UART3>;
 			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -812,8 +824,8 @@
 			reg-io-width = <1>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-				 <&ccu CLK_HDMI>;
-			clock-names = "iahb", "isfr", "tmds";
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
 			phys = <&hdmi_phy>;
@@ -852,6 +864,7 @@
 		rtc: rtc@1f00000 {
 			/* compatible is in per SoC .dtsi file */
 			reg = <0x01f00000 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			clock-output-names = "osc32k", "osc32k-out", "iosc";
@@ -859,10 +872,19 @@
 			#clock-cells = <1>;
 		};
 
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun8i-h3-r-intc",
+				     "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		r_ccu: clock@1f01400 {
 			compatible = "allwinner,sun8i-h3-r-ccu";
 			reg = <0x01f01400 0x100>;
-			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
 				 <&ccu CLK_PLL_PERIPH0>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
@@ -897,11 +919,26 @@
 			#size-cells = <0>;
 		};
 
+		r_uart: serial@1f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&r_ccu CLK_APB0_UART>;
+			resets = <&r_ccu RST_APB0_UART>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_uart_pins>;
+			status = "disabled";
+		};
+
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun8i-h3-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -922,6 +959,11 @@
 				pins = "PL10";
 				function = "s_pwm";
 			};
+
+			r_uart_pins: r-uart-pins {
+				pins = "PL2", "PL3";
+				function = "s_uart";
+			};
 		};
 
 		r_pwm: pwm@1f03800 {
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
index c44fd726945a..89731bb34c6b 100644
--- a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
+++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
@@ -42,13 +42,14 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi
index 204fba3614f9..50d328c2a84d 100644
--- a/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi
+++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi
@@ -156,7 +156,7 @@
 &spi0 {
 	status = "okay";
 
-	spiflash@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <50000000>;
diff --git a/arch/arm/boot/dts/tegra114-asus-tf701t.dts b/arch/arm/boot/dts/tegra114-asus-tf701t.dts
new file mode 100644
index 000000000000..84a3eb38e71d
--- /dev/null
+++ b/arch/arm/boot/dts/tegra114-asus-tf701t.dts
@@ -0,0 +1,807 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+
+#include "tegra114.dtsi"
+
+/ {
+	model = "Asus Transformer Pad TF701T";
+	compatible = "asus,tf701t", "nvidia,tegra114";
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = "/mmc@78000600"; /* eMMC */
+		mmc1 = "/mmc@78000400"; /* uSD slot */
+		mmc2 = "/mmc@78000000"; /* WiFi */
+
+		rtc0 = &palmas;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd; /* Console */
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;
+			linux,cma-default;
+			reusable;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&tps65913_ldo2>;
+
+			nvidia,ganged-mode = <&dsib>;
+
+			panel_primary: panel@0 {
+				compatible = "sharp,lq101r1sx01";
+				reg = <0>;
+
+				link2 = <&panel_secondary>;
+
+				power-supply = <&vdd_lcd>;
+				backlight = <&backlight>;
+			};
+		};
+
+		dsi@54400000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&tps65913_ldo2>;
+
+			panel_secondary: panel@0 {
+				compatible = "sharp,lq101r1sx01";
+				reg = <0>;
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		asus_pad_ec_default: pinmux-asus-pad-ec-default {
+			ec-interrupt {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ec-request {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		backlight_default: pinmux-backlight-default {
+			backlight-enable {
+				nvidia,pins = "gmi_ad10_ph2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		codec_default: pinmux-codec-default {
+			interrupt {
+				nvidia,pins = "gpio_w2_aud_pw2",
+						"gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ldo1-en {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		gpio_hall_sensor_default: pinmux-gpio-hall-sensor-default {
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+
+		gpio_keys_default: pinmux-gpio-keys-default {
+			power {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			volume {
+				nvidia,pins = "kb_row1_pr1",
+						"kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+
+		hp_det_default: pinmux-hp-det-default {
+			gmi_iordy_pi5 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+
+		imu_default: pinmux-imu-default {
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+
+		pwm_default: pinmux-pwm-default {
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		/* XXX make this something more sensible */
+		pwm_sleep: pinmux-pwm-sleep {
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		sdmmc3_default: pinmux-sdmmc3-default {
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <22>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"kb_col4_pq4",
+						"sdmmc3_clk_lb_out_pee4",
+						"sdmmc3_clk_lb_in_pee5",
+						"sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+
+		sdmmc3_vdd_default: pinmux-sdmmc3-vdd-default {
+			gmi_clk_pk1 {
+				nvidia,pins = "gmi_clk_pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		vdd_lcd_default: pinmux-vdd-lcd-default {
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		/* GPS */
+	};
+
+	serial@70006200 {
+		/* Bluetooth */
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pwm_default>;
+		pinctrl-1 = <&pwm_sleep>;
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		magnetometer@c {
+			compatible = "asahi-kasei,ak09911";
+			reg = <0xc>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+		};
+
+		rt5639: audio-codec@1c {
+			compatible = "realtek,rt5639";
+			reg = <0x1c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
+
+			realtek,ldo1-en-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&codec_default>;
+		};
+
+		temp_sensor: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		motion-tracker@68 {
+			compatible = "invensense,mpu6500";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(R, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			mount-matrix =  "0", "-1", "0",
+					"1",  "0", "0",
+					"0",  "0", "1";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&imu_default>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		power-sensor@44 {
+			compatible = "ti,ina230";
+			reg = <0x44>;
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		light-sensor@1c {
+			compatible = "dynaimage,al3320a";
+			reg = <0x1c>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+		};
+	};
+
+	i2c@7000c700 {
+		/* HDMI DDC */
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		palmas: pmic@58 {
+			compatible = "ti,tps65913", "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+				ti,palmas-enable-dvfs1;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					pin_gpio0 {
+						pins = "gpio0";
+						function = "gpio";
+					};
+
+					pin_gpio1 {
+						pins = "gpio1";
+						function = "gpio";
+					};
+
+					pin_gpio2 {
+						pins = "gpio2";
+						function = "gpio";
+					};
+
+					pin_gpio3 {
+						pins = "gpio3";
+						function = "gpio";
+					};
+
+					pin_gpio4 {
+						pins = "gpio4";
+						function = "gpio";
+					};
+
+					pin_gpio5 {
+						pins = "gpio5";
+						function = "gpio";
+					};
+
+					pin_gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+					};
+
+					pin_gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+					};
+
+					pin_powergood {
+						pins = "powergood";
+						function = "powergood";
+					};
+
+					pin_vac {
+						pins = "vac";
+						function = "vac";
+					};
+				};
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				ldo1-in-supply = <&tps65913_smps7>;
+				ldo2-in-supply = <&tps65913_smps7>;
+				ldo4-in-supply = <&tps65913_smps8>;
+				ldo5-in-supply = <&tps65913_smps9>;
+				ldo6-in-supply = <&tps65913_smps9>;
+				ldo7-in-supply = <&tps65913_smps9>;
+				ldo9-in-supply = <&tps65913_smps9>;
+
+				regulators {
+					tps65913_smps123: smps123 {
+						regulator-name = "vdd-cpu";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <1>;
+						ti,mode-sleep = <3>;
+					};
+
+					tps65913_smps45: smps45 {
+						regulator-name = "vdd-core";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,roof-floor = <3>;
+					};
+
+					smps6 {
+						regulator-name = "va-lcd-hv";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					tps65913_smps7: smps7 {
+						regulator-name = "vdd-ddr";
+						regulator-min-microvolt = <1350000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					tps65913_smps8: smps8 {
+						regulator-name = "vdd-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					tps65913_smps9: smps9 {
+						regulator-name = "vdd-sd";
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-always-on;
+					};
+
+					tps65913_smps10_out1: smps10_out1 {
+						regulator-name = "vd-smps10-out1";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					tps65913_smps10_out2: smps10_out2 {
+						regulator-name = "vd-smps10-out2";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					tps65913_ldo1: ldo1 {
+						regulator-name = "vdd-hdmi-pll";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						ti,roof-floor = <3>;
+					};
+
+					tps65913_ldo2: ldo2 {
+						regulator-name = "vdd-2v8-dsi-csi";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-boot-on;
+					};
+
+					ldo3 {
+						regulator-name = "vpp-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ldo4 {
+						regulator-name = "vdd-1v2-cam";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					ldo5 {
+						regulator-name = "vdd-cam";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo6 {
+						regulator-name = "vdd-dev";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+						regulator-boot-on;
+					};
+
+					ldo7 {
+						regulator-name = "vdd-2v8-cam";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					tps65913_ldo8: ldo8 {
+						regulator-name = "vdd-rtc";
+						regulator-min-microvolt = <950000>;
+						regulator-max-microvolt = <950000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					tps65913_ldo9: ldo9 {
+						regulator-name = "vdd-sdmmc";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2900000>;
+					};
+
+					tps65913_ldoln: ldoln {
+						regulator-name = "vdd-hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldousb {
+						regulator-name = "vdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+		};
+	};
+
+	ahub@70080000 {
+		i2s@70080300 {
+			status = "okay";
+		};
+	};
+
+	mmc@78000000 {
+		/* WiFi */
+	};
+
+	/* MicroSD card */
+	mmc@78000400 {
+		status = "okay";
+
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+
+		nvidia,default-tap = <0x3>;
+		nvidia,default-trim = <0x3>;
+
+		vmmc-supply = <&vdd_usd>;
+		vqmmc-supply = <&tps65913_ldo9>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc3_default>;
+	};
+
+	mmc@78000600 {
+		/* eMMC */
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra114-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+
+		/* Peripheral USB via ASUS connector */
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+	};
+
+	usb@7d008000 {
+		status = "okay";
+
+		/* Host USB via dock */
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_5v0_sys>;
+		pwms = <&pwm 1 1000000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <224>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_default>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		label = "GPIO Hall Effect Sensor";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+
+		switch-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		label = "GPIO Buttons";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		button-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		button-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5639-tf701t",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "Asus Transformer Pad TF701T RT5639";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s0>;
+		nvidia,audio-codec = <&rt5639>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
+			 <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA114_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA114_CLK_EXTERN1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_default>;
+	};
+
+	vdd_5v0_sys: regulator-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_lcd: regulator-vdd-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_lcd_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&tps65913_smps8>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_lcd_default>;
+	};
+
+	vdd_usd: regulator-vdd-usd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_sd_slot";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		vin-supply = <&tps65913_smps9>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc3_vdd_default>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index c04162ddec3c..a685fcb129d0 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -788,7 +788,7 @@
 			reg = <0x4c>;
 			vcc-supply = <&palmas_ldo6_reg>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_EDGE_FALLING>;
 		};
 	};
 
@@ -894,7 +894,7 @@
 		};
 
 		palmas: tps65913@58 {
-			compatible = "ti,palmas";
+			compatible = "ti,tps65913", "ti,palmas";
 			reg = <0x58>;
 			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -909,6 +909,19 @@
 				#gpio-cells = <2>;
 			};
 
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					pin_gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+					};
+				};
+			};
+
 			pmic {
 				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
 				smps1-in-supply = <&tps65090_dcdc3_reg>;
@@ -1065,26 +1078,14 @@
 				interrupt-parent = <&palmas>;
 				interrupts = <8 0>;
 			};
-
-			pinmux {
-				compatible = "ti,tps65913-pinctrl";
-				pinctrl-names = "default";
-				pinctrl-0 = <&palmas_default>;
-
-				palmas_default: pinmux {
-					pin_gpio6 {
-						pins = "gpio6";
-						function = "gpio";
-					};
-				};
-			};
 		};
 	};
 
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spi-flash@0 {
+
+		flash@0 {
 			compatible = "winbond,w25q32dw", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
@@ -1151,7 +1152,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1160,33 +1161,33 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		volume_down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		volume_up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 	};
 
-	vdd_ac_bat_reg: regulator@0 {
+	vdd_ac_bat_reg: regulator-acbat {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ac_bat";
 		regulator-min-microvolt = <5000000>;
@@ -1194,7 +1195,7 @@
 		regulator-always-on;
 	};
 
-	dvdd_ts_reg: regulator@1 {
+	dvdd_ts_reg: regulator-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "dvdd_ts";
 		regulator-min-microvolt = <1800000>;
@@ -1203,7 +1204,7 @@
 		gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
 	};
 
-	usb1_vbus_reg: regulator@3 {
+	usb1_vbus_reg: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -1214,7 +1215,7 @@
 		vin-supply = <&tps65090_dcdc1_reg>;
 	};
 
-	usb3_vbus_reg: regulator@4 {
+	usb3_vbus_reg: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb2_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -1225,7 +1226,7 @@
 		vin-supply = <&tps65090_dcdc1_reg>;
 	};
 
-	vdd_hdmi_reg: regulator@5 {
+	vdd_hdmi_reg: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_hdmi_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -1233,7 +1234,7 @@
 		vin-supply = <&tps65090_dcdc1_reg>;
 	};
 
-	vdd_cam_1v8_reg: regulator@6 {
+	vdd_cam_1v8_reg: regulator-cam {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_cam_1v8_reg";
 		regulator-min-microvolt = <1800000>;
@@ -1242,7 +1243,7 @@
 		gpio = <&palmas_gpio 6 0>;
 	};
 
-	vdd_5v0_hdmi: regulator@7 {
+	vdd_5v0_hdmi: regulator-hdmicon {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_5V0_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
index 07960171fabe..b9d00009d1f4 100644
--- a/arch/arm/boot/dts/tegra114-roth.dts
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -801,7 +801,7 @@
 		};
 
 		palmas: pmic@58 {
-			compatible = "ti,palmas";
+			compatible = "ti,tps65913", "ti,palmas";
 			reg = <0x58>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -1016,7 +1016,7 @@
 		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1025,19 +1025,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -1045,7 +1045,7 @@
 		};
 	};
 
-	lcd_bl_en: regulator@0 {
+	lcd_bl_en: regulator-lcden {
 		compatible = "regulator-fixed";
 		regulator-name = "lcd_bl_en";
 		regulator-min-microvolt = <5000000>;
@@ -1053,7 +1053,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_lcd: regulator@1 {
+	vdd_lcd: regulator-lcd {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_lcd_1v8";
 		regulator-min-microvolt = <1800000>;
@@ -1064,7 +1064,7 @@
 		regulator-boot-on;
 	};
 
-	regulator@2 {
+	regulator-1v8ts {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8_ts";
 		regulator-min-microvolt = <1800000>;
@@ -1073,7 +1073,7 @@
 		regulator-boot-on;
 	};
 
-	regulator@3 {
+	regulator-3v3ts {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3_ts";
 		regulator-min-microvolt = <3300000>;
@@ -1083,7 +1083,7 @@
 		regulator-boot-on;
 	};
 
-	regulator@4 {
+	regulator-1v8com {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8_com";
 		regulator-min-microvolt = <1800000>;
@@ -1094,7 +1094,7 @@
 		regulator-boot-on;
 	};
 
-	regulator@5 {
+	regulator-3v3com {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3_com";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts
index 745d234b105b..f02d8c79eee7 100644
--- a/arch/arm/boot/dts/tegra114-tn7.dts
+++ b/arch/arm/boot/dts/tegra114-tn7.dts
@@ -62,7 +62,7 @@
 		clock-frequency = <400000>;
 
 		palmas: pmic@58 {
-			compatible = "ti,palmas";
+			compatible = "ti,tps65913", "ti,palmas";
 			reg = <0x58>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -273,7 +273,7 @@
 		power-supply = <&lcd_bl_en>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -282,20 +282,20 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		volume_down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 
-		volume_up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
@@ -303,7 +303,7 @@
 	};
 
 	/* FIXME: output of BQ24192 */
-	vs_sys: regulator@0 {
+	vs_sys: regulator-vs {
 		compatible = "regulator-fixed";
 		regulator-name = "VS_SYS";
 		regulator-min-microvolt = <4200000>;
@@ -312,7 +312,7 @@
 		regulator-boot-on;
 	};
 
-	lcd_bl_en: regulator@1 {
+	lcd_bl_en: regulator-lcden {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_LCD_BL";
 		regulator-min-microvolt = <16500000>;
@@ -323,7 +323,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_lcd: regulator@2 {
+	vdd_lcd: regulator-lcd {
 		compatible = "regulator-fixed";
 		regulator-name = "VD_LCD_1V8";
 		regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index fb99b3e971c3..09996acad639 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -17,6 +17,19 @@
 		reg = <0x80000000 0x0>;
 	};
 
+	sram@40000000 {
+		compatible = "mmio-sram";
+		reg = <0x40000000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000>;
+
+		vde_pool: sram@400 {
+			reg = <0x400 0x3fc00>;
+			pool;
+		};
+	};
+
 	host1x@50000000 {
 		compatible = "nvidia,tegra114-host1x";
 		reg = <0x50000000 0x00028000>;
@@ -25,8 +38,8 @@
 		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA114_CLK_HOST1X>;
 		clock-names = "host1x";
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA114_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
 		iommus = <&mc TEGRA_SWGROUP_HC>;
 
 		#address-cells = <1>;
@@ -39,8 +52,8 @@
 			reg = <0x54140000 0x00040000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA114_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
+			resets = <&tegra_car 21>, <&mc TEGRA114_MC_RESET_2D>;
+			reset-names = "2d", "mc";
 
 			iommus = <&mc TEGRA_SWGROUP_G2>;
 		};
@@ -49,8 +62,8 @@
 			compatible = "nvidia,tegra114-gr3d";
 			reg = <0x54180000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_GR3D>;
-			resets = <&tegra_car 24>;
-			reset-names = "3d";
+			resets = <&tegra_car 24>, <&mc TEGRA114_MC_RESET_3D>;
+			reset-names = "3d", "mc";
 
 			iommus = <&mc TEGRA_SWGROUP_NV>;
 		};
@@ -105,7 +118,7 @@
 			status = "disabled";
 		};
 
-		dsi@54300000 {
+		dsia: dsi@54300000 {
 			compatible = "nvidia,tegra114-dsi";
 			reg = <0x54300000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_DSIA>,
@@ -121,7 +134,7 @@
 			#size-cells = <0>;
 		};
 
-		dsi@54400000 {
+		dsib: dsi@54400000 {
 			compatible = "nvidia,tegra114-dsi";
 			reg = <0x54400000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_DSIB>,
@@ -164,7 +177,7 @@
 	};
 
 	timer@60005000 {
-		compatible = "nvidia,tegra114-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+		compatible = "nvidia,tegra114-timer", "nvidia,tegra30-timer";
 		reg = <0x60005000 0x400>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
@@ -248,9 +261,31 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
-		/*
 		gpio-ranges = <&pinmux 0 0 246>;
-		*/
+	};
+
+	vde@6001a000 {
+		compatible = "nvidia,tegra114-vde";
+		reg = <0x6001a000 0x1000>, /* Syntax Engine */
+		      <0x6001b000 0x1000>, /* Video Bitstream Engine */
+		      <0x6001c000  0x100>, /* Macroblock Engine */
+		      <0x6001c200  0x100>, /* Post-processing Engine */
+		      <0x6001c400  0x100>, /* Motion Compensation Engine */
+		      <0x6001c600  0x100>, /* Transform Engine */
+		      <0x6001c800  0x100>, /* Pixel prediction block */
+		      <0x6001ca00  0x100>, /* Video DMA */
+		      <0x6001d800  0x400>; /* Video frame controls */
+		reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+			    "tfe", "ppb", "vdma", "frameid";
+		iram = <&vde_pool>; /* IRAM region */
+		interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
+		interrupt-names = "sync-token", "bsev", "sxe";
+		clocks = <&tegra_car TEGRA114_CLK_VDE>;
+		reset-names = "vde", "mc";
+		resets = <&tegra_car 61>, <&mc TEGRA114_MC_RESET_VDE>;
+		iommus = <&mc TEGRA_SWGROUP_VDE>;
 	};
 
 	apbmisc@70000800 {
@@ -542,6 +577,7 @@
 
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 
+		#reset-cells = <1>;
 		#iommu-cells = <1>;
 	};
 
@@ -691,7 +727,7 @@
 	};
 
 	usb@7d000000 {
-		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci";
 		reg = <0x7d000000 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -706,6 +742,7 @@
 		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x7d000000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA114_CLK_USBD>,
 			 <&tegra_car TEGRA114_CLK_PLL_U>,
@@ -725,11 +762,12 @@
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
 	usb@7d008000 {
-		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci";
 		reg = <0x7d008000 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -744,6 +782,7 @@
 		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x7d008000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA114_CLK_USB3>,
 			 <&tegra_car TEGRA114_CLK_PLL_U>,
@@ -762,6 +801,7 @@
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
index a7ac805eeed5..970f33dd9101 100644
--- a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi
@@ -4,6 +4,8 @@
  *
  */
 
+#include <dt-bindings/clock/tegra124-car.h>
+
 / {
 	clock@60006000 {
 		emc-timings-1 {
@@ -15,66 +17,77 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			timing-528000000 {
 				clock-frequency = <528000000>;
 				nvidia,parent-clock-frequency = <528000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-924000000 {
 				clock-frequency = <924000000>;
 				nvidia,parent-clock-frequency = <924000000>;
@@ -84,6 +97,216 @@
 		};
 	};
 
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 0x8000000a
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x77e30303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 0x80000012
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x76230303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 0x80000017
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x74a30303 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 0x8000001e
+					0x00000001 0x00000001
+					0x00000002 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0502
+					0x74230403 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 0x80000026
+					0x00000001 0x00000001
+					0x00000003 0x00000000
+					0x00000002 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000003 0x00000006
+					0x06030203 0x000a0503
+					0x73c30504 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 0x80000040
+					0x00000001 0x00000001
+					0x00000004 0x00000002
+					0x00000003 0x00000001
+					0x00000003 0x00000008
+					0x00000003 0x00000002
+					0x00000004 0x00000006
+					0x06040203 0x000a0504
+					0x73840a05 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 0x80000040
+					0x00000001 0x00000002
+					0x00000007 0x00000004
+					0x00000004 0x00000001
+					0x00000002 0x00000007
+					0x00000002 0x00000002
+					0x00000004 0x00000006
+					0x06040202 0x000b0607
+					0x77450e08 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 0x80000040
+					0x00000001 0x00000002
+					0x00000009 0x00000005
+					0x00000006 0x00000001
+					0x00000002 0x00000008
+					0x00000002 0x00000002
+					0x00000004 0x00000006
+					0x06040202 0x000d0709
+					0x7586120a 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 0x80000040
+					0x00000002 0x00000003
+					0x0000000c 0x00000007
+					0x00000008 0x00000001
+					0x00000002 0x00000009
+					0x00000002 0x00000002
+					0x00000005 0x00000006
+					0x06050202 0x0010090c
+					0x7428180d 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 0x80000040
+					0x00000003 0x00000004
+					0x0000000e 0x00000009
+					0x0000000a 0x00000001
+					0x00000003 0x0000000b
+					0x00000002 0x00000002
+					0x00000005 0x00000007
+					0x07050202 0x00130b0e
+					0x73a91b0f 0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b 0x80000040
+					0x00000004 0x00000005
+					0x00000013 0x0000000c
+					0x0000000d 0x00000002
+					0x00000003 0x0000000c
+					0x00000002 0x00000002
+					0x00000006 0x00000008
+					0x08060202 0x00170e13
+					0x736c2414 0x70000f02
+					0x001f0000
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000d 0x80000040
+					0x00000005 0x00000006
+					0x00000016 0x0000000e
+					0x0000000f 0x00000002
+					0x00000004 0x0000000e
+					0x00000002 0x00000002
+					0x00000006 0x00000009
+					0x09060202 0x001a1016
+					0x734e2a17 0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+
 	external-memory-controller@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
@@ -1251,225 +1474,14 @@
 					0x00000011
 				>;
 			};
-
 		};
 	};
 
-	memory-controller@70019000 {
-		emc-timings-1 {
-			nvidia,ram-code = <1>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001 0x8000000a
-					0x00000001 0x00000001
-					0x00000002 0x00000000
-					0x00000002 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000003 0x00000006
-					0x06030203 0x000a0502
-					0x77e30303 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001 0x80000012
-					0x00000001 0x00000001
-					0x00000002 0x00000000
-					0x00000002 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000003 0x00000006
-					0x06030203 0x000a0502
-					0x76230303 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001 0x80000017
-					0x00000001 0x00000001
-					0x00000002 0x00000000
-					0x00000002 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000003 0x00000006
-					0x06030203 0x000a0502
-					0x74a30303 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001 0x8000001e
-					0x00000001 0x00000001
-					0x00000002 0x00000000
-					0x00000002 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000003 0x00000006
-					0x06030203 0x000a0502
-					0x74230403 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001 0x80000026
-					0x00000001 0x00000001
-					0x00000003 0x00000000
-					0x00000002 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000003 0x00000006
-					0x06030203 0x000a0503
-					0x73c30504 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003 0x80000040
-					0x00000001 0x00000001
-					0x00000004 0x00000002
-					0x00000003 0x00000001
-					0x00000003 0x00000008
-					0x00000003 0x00000002
-					0x00000004 0x00000006
-					0x06040203 0x000a0504
-					0x73840a05 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004 0x80000040
-					0x00000001 0x00000002
-					0x00000007 0x00000004
-					0x00000004 0x00000001
-					0x00000002 0x00000007
-					0x00000002 0x00000002
-					0x00000004 0x00000006
-					0x06040202 0x000b0607
-					0x77450e08 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005 0x80000040
-					0x00000001 0x00000002
-					0x00000009 0x00000005
-					0x00000006 0x00000001
-					0x00000002 0x00000008
-					0x00000002 0x00000002
-					0x00000004 0x00000006
-					0x06040202 0x000d0709
-					0x7586120a 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007 0x80000040
-					0x00000002 0x00000003
-					0x0000000c 0x00000007
-					0x00000008 0x00000001
-					0x00000002 0x00000009
-					0x00000002 0x00000002
-					0x00000005 0x00000006
-					0x06050202 0x0010090c
-					0x7428180d 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009 0x80000040
-					0x00000003 0x00000004
-					0x0000000e 0x00000009
-					0x0000000a 0x00000001
-					0x00000003 0x0000000b
-					0x00000002 0x00000002
-					0x00000005 0x00000007
-					0x07050202 0x00130b0e
-					0x73a91b0f 0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b 0x80000040
-					0x00000004 0x00000005
-					0x00000013 0x0000000c
-					0x0000000d 0x00000002
-					0x00000003 0x0000000c
-					0x00000002 0x00000002
-					0x00000006 0x00000008
-					0x08060202 0x00170e13
-					0x736c2414 0x70000f02
-					0x001f0000
-				>;
-			};
-
-			timing-924000000 {
-				clock-frequency = <924000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000d 0x80000040
-					0x00000005 0x00000006
-					0x00000016 0x0000000e
-					0x0000000f 0x00000002
-					0x00000004 0x0000000e
-					0x00000002 0x00000002
-					0x00000006 0x00000009
-					0x09060202 0x001a1016
-					0x734e2a17 0x70000f02
-					0x001f0000
-				>;
-			};
-		};
+	opp-table-actmon {
+		/delete-node/ opp-1200000000;
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@1200000000,1100;
-};
-
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp@1200000000;
+	opp-table-emc {
+		/delete-node/ opp-1200000000-1100;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index 28c29b6813a7..2df2d8a6b552 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -40,6 +40,16 @@
 		};
 	};
 
+	gpio: gpio@6000d000 {
+		/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+		pex-perst-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PEX_PERST_N";
+		};
+	};
+
 	/* Apalis UART1 */
 	serial@70006000 {
 		status = "okay";
@@ -191,7 +201,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "WAKE1_MICO";
 			gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -243,13 +253,3 @@
 		vin-supply = <&reg_5v0>;
 	};
 };
-
-&gpio {
-	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PEX_PERST_N";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
index f3afde410615..f4521fd15f6a 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
@@ -41,6 +41,16 @@
 		};
 	};
 
+	gpio@6000d000 {
+		/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+		pex-perst-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PEX_PERST_N";
+		};
+	};
+
 	/* Apalis UART1 */
 	serial@70006000 {
 		status = "okay";
@@ -193,7 +203,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "WAKE1_MICO";
 			gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -245,13 +255,3 @@
 		vin-supply = <&reg_5v0>;
 	};
 };
-
-&gpio {
-	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PEX_PERST_N";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index 1e30fa405fa0..75cfe718737c 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -57,7 +57,7 @@
 		};
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
@@ -65,6 +65,24 @@
 		vdd-supply = <&reg_vdd_gpu>;
 	};
 
+	gpio@6000d000 {
+		/* I210 Gigabit Ethernet Controller Reset */
+		lan-reset-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "LAN_RESET_N";
+		};
+
+		/* Control MXM3 pin 26 Reset Module Output Carrier Input */
+		reset-moci-ctrl-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "RESET_MOCI_CTRL";
+		};
+	};
+
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -1539,14 +1557,17 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	hdmi_ddc: i2c@7000c700 {
@@ -1582,18 +1603,18 @@
 			pinctrl-0 = <&as3722_default>;
 
 			as3722_default: pinmux {
+				gpio0-1-3-4-5-6 {
+					pins = "gpio0", "gpio1", "gpio3",
+					       "gpio4", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+
 				gpio2-7 {
 					pins = "gpio2", /* PWR_EN_+V3.3 */
 					       "gpio7"; /* +V1.6_LPO */
 					function = "gpio";
 					bias-pull-up;
 				};
-
-				gpio0-1-3-4-5-6 {
-					pins = "gpio0", "gpio1", "gpio3",
-					       "gpio4", "gpio5", "gpio6";
-					bias-high-impedance;
-				};
 			};
 
 			regulators {
@@ -1751,7 +1772,7 @@
 			compatible = "ti,tmp451";
 			reg = <0x4c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
 			#thermal-sensor-cells = <1>;
 			vcc-supply = <&reg_module_3v3>;
 		};
@@ -1885,6 +1906,7 @@
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
+				usb-role-switch;
 				vbus-supply = <&reg_usbo1_vbus>;
 			};
 
@@ -1939,18 +1961,18 @@
 		};
 	};
 
-	clk32k_in: osc3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
-
 	cpus {
 		cpu@0 {
 			vdd-cpu-supply = <&reg_vdd_cpu>;
 		};
 	};
 
+	clk32k_in: osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
 	reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll {
 		compatible = "regulator-fixed";
 		regulator-name = "+V1.05_AVDD_HDMI_PLL";
@@ -2021,7 +2043,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			trips {
 				cpu-shutdown-trip {
 					temperature = <101000>;
@@ -2031,7 +2053,7 @@
 			};
 		};
 
-		mem {
+		mem-thermal {
 			trips {
 				mem-shutdown-trip {
 					temperature = <101000>;
@@ -2041,7 +2063,7 @@
 			};
 		};
 
-		gpu {
+		gpu-thermal {
 			trips {
 				gpu-shutdown-trip {
 					temperature = <101000>;
@@ -2052,21 +2074,3 @@
 		};
 	};
 };
-
-&gpio {
-	/* I210 Gigabit Ethernet Controller Reset */
-	lan-reset-n {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LAN_RESET_N";
-	};
-
-	/* Control MXM3 pin 26 Reset Module Output Carrier Input */
-	reset-moci-ctrl {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "RESET_MOCI_CTRL";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 608896f8dd52..554c8089491c 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -56,7 +56,7 @@
 		};
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
@@ -64,6 +64,24 @@
 		vdd-supply = <&reg_vdd_gpu>;
 	};
 
+	gpio@6000d000 {
+		/* I210 Gigabit Ethernet Controller Reset */
+		lan-reset-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "LAN_RESET_N";
+		};
+
+		/* Control MXM3 pin 26 Reset Module Output Carrier Input */
+		reset-moci-ctrl-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "RESET_MOCI_CTRL";
+		};
+	};
+
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -1532,14 +1550,17 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	hdmi_ddc: i2c@7000c400 {
@@ -1575,18 +1596,18 @@
 			pinctrl-0 = <&as3722_default>;
 
 			as3722_default: pinmux {
+				gpio0-1-3-4-5-6 {
+					pins = "gpio0", "gpio1", "gpio3",
+					       "gpio4", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+
 				gpio2-7 {
 					pins = "gpio2", /* PWR_EN_+V3.3 */
 					       "gpio7"; /* +V1.6_LPO */
 					function = "gpio";
 					bias-pull-up;
 				};
-
-				gpio0-1-3-4-5-6 {
-					pins = "gpio0", "gpio1", "gpio3",
-					       "gpio4", "gpio5", "gpio6";
-					bias-high-impedance;
-				};
 			};
 
 			regulators {
@@ -1744,7 +1765,7 @@
 			compatible = "ti,tmp451";
 			reg = <0x4c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
 			#thermal-sensor-cells = <1>;
 			vcc-supply = <&reg_module_3v3>;
 		};
@@ -1877,6 +1898,7 @@
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
+				usb-role-switch;
 				vbus-supply = <&reg_usbo1_vbus>;
 			};
 
@@ -1931,18 +1953,18 @@
 		};
 	};
 
-	clk32k_in: osc3 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
-
 	cpus {
 		cpu@0 {
 			vdd-cpu-supply = <&reg_vdd_cpu>;
 		};
 	};
 
+	clk32k_in: osc3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
 	reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll {
 		compatible = "regulator-fixed";
 		regulator-name = "+V1.05_AVDD_HDMI_PLL";
@@ -2013,7 +2035,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			trips {
 				cpu-shutdown-trip {
 					temperature = <101000>;
@@ -2023,7 +2045,7 @@
 			};
 		};
 
-		mem {
+		mem-thermal {
 			trips {
 				mem-shutdown-trip {
 					temperature = <101000>;
@@ -2033,7 +2055,7 @@
 			};
 		};
 
-		gpu {
+		gpu-thermal {
 			trips {
 				gpu-shutdown-trip {
 					temperature = <101000>;
@@ -2044,21 +2066,3 @@
 		};
 	};
 };
-
-&gpio {
-	/* I210 Gigabit Ethernet Controller Reset */
-	lan-reset-n {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LAN_RESET_N";
-	};
-
-	/* Control MXM3 pin 26 Reset Module Output Carrier Input */
-	reset-moci-ctrl {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "RESET_MOCI_CTRL";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
index df4e463afbd1..d10e5334a6c6 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi
@@ -1,4 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/tegra124-car.h>
+
 / {
 	clock@60006000 {
 		emc-timings-3 {
@@ -10,66 +13,77 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			timing-528000000 {
 				clock-frequency = <528000000>;
 				nvidia,parent-clock-frequency = <528000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-924000000 {
 				clock-frequency = <924000000>;
 				nvidia,parent-clock-frequency = <924000000>;
@@ -79,6 +93,324 @@
 		};
 	};
 
+	memory-controller@70019000 {
+		emc-timings-3 {
+			nvidia,ram-code = <3>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001
+					0x8000000a
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x77e30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001
+					0x80000012
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x76230303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001
+					0x80000017
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x74a30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001
+					0x8000001e
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0502
+					0x74230403
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001
+					0x80000026
+					0x00000001
+					0x00000001
+					0x00000003
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0503
+					0x73c30504
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003
+					0x80000040
+					0x00000001
+					0x00000001
+					0x00000004
+					0x00000002
+					0x00000003
+					0x00000001
+					0x00000003
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040203
+					0x000a0504
+					0x73840a05
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000004
+					0x00000004
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000b0607
+					0x77450e08
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000005
+					0x00000006
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000d0709
+					0x7586120a
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007
+					0x80000040
+					0x00000002
+					0x00000003
+					0x0000000c
+					0x00000007
+					0x00000008
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000006
+					0x06050202
+					0x0010090c
+					0x7428180d
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009
+					0x80000040
+					0x00000003
+					0x00000004
+					0x0000000e
+					0x00000009
+					0x0000000a
+					0x00000001
+					0x00000003
+					0x0000000b
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000007
+					0x07050202
+					0x00130b0e
+					0x73a91b0f
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b
+					0x80000040
+					0x00000004
+					0x00000005
+					0x00000013
+					0x0000000c
+					0x0000000d
+					0x00000002
+					0x00000003
+					0x0000000c
+					0x00000002
+					0x00000002
+					0x00000006
+					0x00000008
+					0x08060202
+					0x00170e13
+					0x736c2414
+					0x70000f02
+					0x001f0000
+				>;
+			};
+
+			timing-924000000 {
+				clock-frequency = <924000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000d
+					0x80000040
+					0x00000005
+					0x00000006
+					0x00000016
+					0x0000000e
+					0x0000000f
+					0x00000002
+					0x00000004
+					0x0000000e
+					0x00000002
+					0x00000002
+					0x00000006
+					0x00000009
+					0x09060202
+					0x001a1016
+					0x734e2a17
+					0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+
 	external-memory-controller@7001b000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
@@ -2098,333 +2430,14 @@
 					0x00000011
 				>;
 			};
-
 		};
 	};
 
-	memory-controller@70019000 {
-		emc-timings-3 {
-			nvidia,ram-code = <3>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001
-					0x8000000a
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0502
-					0x77e30303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001
-					0x80000012
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0502
-					0x76230303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001
-					0x80000017
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0502
-					0x74a30303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001
-					0x8000001e
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0502
-					0x74230403
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001
-					0x80000026
-					0x00000001
-					0x00000001
-					0x00000003
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0503
-					0x73c30504
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003
-					0x80000040
-					0x00000001
-					0x00000001
-					0x00000004
-					0x00000002
-					0x00000003
-					0x00000001
-					0x00000003
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040203
-					0x000a0504
-					0x73840a05
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004
-					0x80000040
-					0x00000001
-					0x00000002
-					0x00000007
-					0x00000004
-					0x00000004
-					0x00000001
-					0x00000002
-					0x00000007
-					0x00000002
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040202
-					0x000b0607
-					0x77450e08
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005
-					0x80000040
-					0x00000001
-					0x00000002
-					0x00000009
-					0x00000005
-					0x00000006
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000002
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040202
-					0x000d0709
-					0x7586120a
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007
-					0x80000040
-					0x00000002
-					0x00000003
-					0x0000000c
-					0x00000007
-					0x00000008
-					0x00000001
-					0x00000002
-					0x00000009
-					0x00000002
-					0x00000002
-					0x00000005
-					0x00000006
-					0x06050202
-					0x0010090c
-					0x7428180d
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009
-					0x80000040
-					0x00000003
-					0x00000004
-					0x0000000e
-					0x00000009
-					0x0000000a
-					0x00000001
-					0x00000003
-					0x0000000b
-					0x00000002
-					0x00000002
-					0x00000005
-					0x00000007
-					0x07050202
-					0x00130b0e
-					0x73a91b0f
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b
-					0x80000040
-					0x00000004
-					0x00000005
-					0x00000013
-					0x0000000c
-					0x0000000d
-					0x00000002
-					0x00000003
-					0x0000000c
-					0x00000002
-					0x00000002
-					0x00000006
-					0x00000008
-					0x08060202
-					0x00170e13
-					0x736c2414
-					0x70000f02
-					0x001f0000
-				>;
-			};
-
-			timing-924000000 {
-				clock-frequency = <924000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000d
-					0x80000040
-					0x00000005
-					0x00000006
-					0x00000016
-					0x0000000e
-					0x0000000f
-					0x00000002
-					0x00000004
-					0x0000000e
-					0x00000002
-					0x00000002
-					0x00000006
-					0x00000009
-					0x09060202
-					0x001a1016
-					0x734e2a17
-					0x70000f02
-					0x001f0000
-				>;
-			};
-		};
+	opp-table-actmon {
+		/delete-node/ opp-1200000000;
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@1200000000,1100;
-};
-
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp@1200000000;
+	opp-table-emc {
+		/delete-node/ opp-1200000000-1100;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 414cd1cafa7f..4196f2401c90 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -68,11 +68,7 @@
 		};
 	};
 
-	cec@70015000 {
-		status = "okay";
-	};
-
-	gpu@0,57000000 {
+	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
@@ -1389,6 +1385,7 @@
 	 */
 	serial@70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 	};
 
@@ -1401,6 +1398,7 @@
 	 */
 	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 	};
 
@@ -1427,7 +1425,7 @@
 			compatible = "ti,tmp451";
 			reg = <0x4c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
 		};
 
 		eeprom@56 {
@@ -1655,7 +1653,8 @@
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spi-flash@0 {
+
+		flash@0 {
 			compatible = "winbond,w25q32dw", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
@@ -1680,6 +1679,10 @@
 		};
 	};
 
+	cec@70015000 {
+		status = "okay";
+	};
+
 	/* Serial ATA */
 	sata@70020000 {
 		status = "okay";
@@ -1868,7 +1871,7 @@
 		vbus-supply = <&vdd_usb3_vbus>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1883,7 +1886,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -1892,7 +1895,7 @@
 		};
 	};
 
-	vdd_mux: regulator@0 {
+	vdd_mux: regulator-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
 		regulator-min-microvolt = <12000000>;
@@ -1901,7 +1904,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_5v0_sys: regulator@1 {
+	vdd_5v0_sys: regulator-5v0sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -1911,7 +1914,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_sys: regulator@2 {
+	vdd_3v3_sys: regulator-3v3sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_SYS";
 		regulator-min-microvolt = <3300000>;
@@ -1921,7 +1924,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_run: regulator@3 {
+	vdd_3v3_run: regulator-3v3run {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_RUN";
 		regulator-min-microvolt = <3300000>;
@@ -1933,7 +1936,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_3v3_hdmi: regulator@4 {
+	vdd_3v3_hdmi: regulator-3v3hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 		regulator-min-microvolt = <3300000>;
@@ -1941,7 +1944,7 @@
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_usb1_vbus: regulator@5 {
+	vdd_usb1_vbus: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "+USB0_VBUS_SW";
 		regulator-min-microvolt = <5000000>;
@@ -1952,7 +1955,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb3_vbus: regulator@6 {
+	vdd_usb3_vbus: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_HS";
 		regulator-min-microvolt = <5000000>;
@@ -1963,7 +1966,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_3v3_lp0: regulator@7 {
+	vdd_3v3_lp0: regulator-lp0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_LP0";
 		regulator-min-microvolt = <3300000>;
@@ -1975,7 +1978,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_hdmi_pll: regulator@8 {
+	vdd_hdmi_pll: regulator-hdmipll {
 		compatible = "regulator-fixed";
 		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
 		regulator-min-microvolt = <1050000>;
@@ -1984,7 +1987,7 @@
 		vin-supply = <&vdd_1v05_run>;
 	};
 
-	vdd_5v0_hdmi: regulator@9 {
+	vdd_5v0_hdmi: regulator-hdmicon {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
@@ -1995,7 +1998,7 @@
 	};
 
 	/* Molex power connector */
-	vdd_5v0_sata: regulator@10 {
+	vdd_5v0_sata: regulator-5v0sata {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SATA";
 		regulator-min-microvolt = <5000000>;
@@ -2005,7 +2008,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_12v0_sata: regulator@11 {
+	vdd_12v0_sata: regulator-12v0sata {
 		compatible = "regulator-fixed";
 		regulator-name = "+12V_SATA";
 		regulator-min-microvolt = <12000000>;
@@ -2044,7 +2047,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			trips {
 				cpu-shutdown-trip {
 					temperature = <101000>;
@@ -2054,7 +2057,7 @@
 			};
 		};
 
-		mem {
+		mem-thermal {
 			trips {
 				mem-shutdown-trip {
 					temperature = <101000>;
@@ -2064,7 +2067,7 @@
 			};
 		};
 
-		gpu {
+		gpu-thermal {
 			trips {
 				gpu-shutdown-trip {
 					temperature = <101000>;
diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
index a0f56cc9da5c..cadb1969f1cc 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi
@@ -1,9 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
-/ {
-	apbmisc@70000800 {
-		nvidia,long-ram-code;
-	};
 
+#include <dt-bindings/clock/tegra124-car.h>
+
+/ {
 	clock@60006000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
@@ -14,60 +13,70 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			timing-528000000 {
 				clock-frequency = <528000000>;
 				nvidia,parent-clock-frequency = <528000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
@@ -85,60 +94,70 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			timing-528000000 {
 				clock-frequency = <528000000>;
 				nvidia,parent-clock-frequency = <528000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
@@ -156,60 +175,70 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			timing-528000000 {
 				clock-frequency = <528000000>;
 				nvidia,parent-clock-frequency = <528000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
@@ -219,6 +248,882 @@
 		};
 	};
 
+	apbmisc@70000800 {
+		nvidia,long-ram-code;
+	};
+
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 /* MC_EMEM_ARB_CFG */
+					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x76230303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 /* MC_EMEM_ARB_CFG */
+					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74a30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74230403 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 /* MC_EMEM_ARB_CFG */
+					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0403 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0405 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
+					0x77450e08 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7586120a /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000d /* MC_EMEM_ARB_TIMING_RC */
+					0x00000008 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x0010090d /* MC_EMEM_ARB_DA_COVERS */
+					0x7428180e /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
+					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
+					0x73a91b0f /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x734c2414 /* MC_EMEM_ARB_MISC0 */
+					0x70000f02 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-4 {
+			nvidia,ram-code = <4>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 /* MC_EMEM_ARB_CFG */
+					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x77430303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 /* MC_EMEM_ARB_CFG */
+					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75430403 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 /* MC_EMEM_ARB_CFG */
+					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x74e30504 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0504 /* MC_EMEM_ARB_DA_COVERS */
+					0x74a40a05 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
+					0x77450e08 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7586120a /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RC */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x0010090c /* MC_EMEM_ARB_DA_COVERS */
+					0x7488180d /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
+					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
+					0x74691b0f /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00170e13 /* MC_EMEM_ARB_DA_COVERS */
+					0x746c2414 /* MC_EMEM_ARB_MISC0 */
+					0x70000f02 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-6 {
+			nvidia,ram-code = <6>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001 /* MC_EMEM_ARB_CFG */
+					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x76230303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001 /* MC_EMEM_ARB_CFG */
+					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74a30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x74230403 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001 /* MC_EMEM_ARB_CFG */
+					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0403 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0405 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
+					0x77450e08 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7586120a /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000d /* MC_EMEM_ARB_TIMING_RC */
+					0x00000008 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x0010090d /* MC_EMEM_ARB_DA_COVERS */
+					0x7428180e /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009 /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
+					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
+					0x73a91b0f /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b /* MC_EMEM_ARB_CFG */
+					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x734c2414 /* MC_EMEM_ARB_MISC0 */
+					0x70000f02 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+	};
+
 	external-memory-controller@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
@@ -5777,885 +6682,13 @@
 		};
 	};
 
-	memory-controller@70019000 {
-		emc-timings-1 {
-			nvidia,ram-code = <1>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001 /* MC_EMEM_ARB_CFG */
-					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x77e30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001 /* MC_EMEM_ARB_CFG */
-					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x76230303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001 /* MC_EMEM_ARB_CFG */
-					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x74a30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001 /* MC_EMEM_ARB_CFG */
-					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x74230403 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001 /* MC_EMEM_ARB_CFG */
-					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0403 /* MC_EMEM_ARB_DA_COVERS */
-					0x73c30504 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0405 /* MC_EMEM_ARB_DA_COVERS */
-					0x73840a06 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
-					0x77450e08 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
-					0x7586120a /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000d /* MC_EMEM_ARB_TIMING_RC */
-					0x00000008 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x0010090d /* MC_EMEM_ARB_DA_COVERS */
-					0x7428180e /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
-					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
-					0x73a91b0f /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
-					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
-					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
-					0x734c2414 /* MC_EMEM_ARB_MISC0 */
-					0x70000f02 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-		};
-
-		emc-timings-4 {
-			nvidia,ram-code = <4>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001 /* MC_EMEM_ARB_CFG */
-					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-					0x77e30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001 /* MC_EMEM_ARB_CFG */
-					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-					0x77430303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001 /* MC_EMEM_ARB_CFG */
-					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-					0x75e30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001 /* MC_EMEM_ARB_CFG */
-					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-					0x75430403 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001 /* MC_EMEM_ARB_CFG */
-					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
-					0x74e30504 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0504 /* MC_EMEM_ARB_DA_COVERS */
-					0x74a40a05 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
-					0x77450e08 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
-					0x7586120a /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000c /* MC_EMEM_ARB_TIMING_RC */
-					0x00000007 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x0010090c /* MC_EMEM_ARB_DA_COVERS */
-					0x7488180d /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
-					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
-					0x74691b0f /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
-					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
-					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00170e13 /* MC_EMEM_ARB_DA_COVERS */
-					0x746c2414 /* MC_EMEM_ARB_MISC0 */
-					0x70000f02 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-		};
-
-		emc-timings-6 {
-			nvidia,ram-code = <6>;
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001 /* MC_EMEM_ARB_CFG */
-					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x77e30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001 /* MC_EMEM_ARB_CFG */
-					0x80000012 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x76230303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001 /* MC_EMEM_ARB_CFG */
-					0x80000017 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x74a30303 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001 /* MC_EMEM_ARB_CFG */
-					0x8000001e /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
-					0x74230403 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001 /* MC_EMEM_ARB_CFG */
-					0x80000026 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0403 /* MC_EMEM_ARB_DA_COVERS */
-					0x73c30504 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040203 /* MC_EMEM_ARB_DA_TURNS */
-					0x000a0405 /* MC_EMEM_ARB_DA_COVERS */
-					0x73840a06 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000007 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000005 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000b0607 /* MC_EMEM_ARB_DA_COVERS */
-					0x77450e08 /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
-					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06040202 /* MC_EMEM_ARB_DA_TURNS */
-					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
-					0x7586120a /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000d /* MC_EMEM_ARB_TIMING_RC */
-					0x00000008 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x00000009 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-					0x06050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x0010090d /* MC_EMEM_ARB_DA_COVERS */
-					0x7428180e /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009 /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
-					0x0000000e /* MC_EMEM_ARB_TIMING_RC */
-					0x00000009 /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000b /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000005 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000007 /* MC_EMEM_ARB_TIMING_W2R */
-					0x07050202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00130b0e /* MC_EMEM_ARB_DA_COVERS */
-					0x73a91b0f /* MC_EMEM_ARB_MISC0 */
-					0x70000f03 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b /* MC_EMEM_ARB_CFG */
-					0x80000040 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
-					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
-					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
-					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
-					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
-					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
-					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-					0x00000006 /* MC_EMEM_ARB_TIMING_R2W */
-					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
-					0x08060202 /* MC_EMEM_ARB_DA_TURNS */
-					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
-					0x734c2414 /* MC_EMEM_ARB_MISC0 */
-					0x70000f02 /* MC_EMEM_ARB_MISC1 */
-					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-				>;
-			};
-		};
+	opp-table-actmon {
+		/delete-node/ opp-924000000;
+		/delete-node/ opp-1200000000;
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@924000000,1100;
-	/delete-node/ opp@1200000000,1100;
-};
-
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp@924000000;
-	/delete-node/ opp@1200000000;
+	opp-table-emc {
+		/delete-node/ opp-924000000-1100;
+		/delete-node/ opp-1200000000-1100;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-nyan-big-fhd.dts b/arch/arm/boot/dts/tegra124-nyan-big-fhd.dts
new file mode 100644
index 000000000000..4db43324dafa
--- /dev/null
+++ b/arch/arm/boot/dts/tegra124-nyan-big-fhd.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra124-nyan-big.dts"
+
+/ {
+	/* Version of Nyan Big with 1080p panel */
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "auo,b133htn01";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts
index 1d2aac2cb6d0..8bca9599ad6e 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-big.dts
@@ -13,30 +13,23 @@
 		     "google,nyan-big-rev1", "google,nyan-big-rev0",
 		     "google,nyan-big", "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
-		compatible = "auo,b133xtn01";
-
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
-	};
-
-	mmc@700b0400 { /* SD Card on this bus */
-		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-max98090-nyan-big",
-			     "nvidia,tegra-audio-max98090-nyan",
-			     "nvidia,tegra-audio-max98090";
-		nvidia,model = "GoogleNyanBig";
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "auo,b133xtn01";
+					power-supply = <&vdd_3v3_panel>;
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
-		pinmux_default: common {
+		pinmux_default: pinmux {
 			clk_32k_out_pa0 {
 				nvidia,pins = "clk_32k_out_pa0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1341,4 +1334,15 @@
 			};
 		};
 	};
+
+	mmc@700b0400 { /* SD Card on this bus */
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-max98090-nyan-big",
+			     "nvidia,tegra-audio-max98090-nyan",
+			     "nvidia,tegra-audio-max98090";
+		nvidia,model = "GoogleNyanBig";
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
index 35c98734d35f..e8dcc4f51fc5 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi
@@ -1,4 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/tegra124-car.h>
+
 / {
 	clock@60006000 {
 		emc-timings-1 {
@@ -10,55 +13,65 @@
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-20400000 {
 				clock-frequency = <20400000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-40800000 {
 				clock-frequency = <40800000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-68000000 {
 				clock-frequency = <68000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-102000000 {
 				clock-frequency = <102000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-204000000 {
 				clock-frequency = <204000000>;
 				nvidia,parent-clock-frequency = <408000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_P>;
 				clock-names = "emc-parent";
 			};
+
 			timing-300000000 {
 				clock-frequency = <300000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C>;
 				clock-names = "emc-parent";
 			};
+
 			timing-396000000 {
 				clock-frequency = <396000000>;
 				nvidia,parent-clock-frequency = <792000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_M>;
 				clock-names = "emc-parent";
 			};
+
 			/* TODO: Add 528MHz frequency */
+
 			timing-600000000 {
 				clock-frequency = <600000000>;
 				nvidia,parent-clock-frequency = <600000000>;
 				clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>;
 				clock-names = "emc-parent";
 			};
+
 			timing-792000000 {
 				clock-frequency = <792000000>;
 				nvidia,parent-clock-frequency = <792000000>;
@@ -68,6 +81,298 @@
 		};
 	};
 
+	memory-controller@70019000 {
+		emc-timings-1 {
+			nvidia,ram-code = <1>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001
+					0x8000000a
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x77e30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-20400000 {
+				clock-frequency = <20400000>;
+
+				nvidia,emem-configuration = <
+					0x40020001
+					0x80000012
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x76230303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-40800000 {
+				clock-frequency = <40800000>;
+
+				nvidia,emem-configuration = <
+					0xa0000001
+					0x80000017
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x74a30303
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-68000000 {
+				clock-frequency = <68000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001
+					0x8000001e
+					0x00000001
+					0x00000001
+					0x00000002
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0402
+					0x74230403
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x08000001
+					0x80000026
+					0x00000001
+					0x00000001
+					0x00000003
+					0x00000000
+					0x00000002
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000003
+					0x00000006
+					0x06030203
+					0x000a0403
+					0x73c30504
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x01000003
+					0x80000040
+					0x00000001
+					0x00000001
+					0x00000005
+					0x00000002
+					0x00000004
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000003
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040203
+					0x000a0405
+					0x73840a06
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-300000000 {
+				clock-frequency = <300000000>;
+
+				nvidia,emem-configuration = <
+					0x08000004
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000004
+					0x00000005
+					0x00000001
+					0x00000002
+					0x00000007
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000b0607
+					0x77450e08
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-396000000 {
+				clock-frequency = <396000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000005
+					0x80000040
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000005
+					0x00000007
+					0x00000001
+					0x00000002
+					0x00000008
+					0x00000002
+					0x00000002
+					0x00000004
+					0x00000006
+					0x06040202
+					0x000d0709
+					0x7586120a
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-528000000 {
+				clock-frequency = <528000000>;
+
+				nvidia,emem-configuration = <
+					0x0f000007
+					0x80000040
+					0x00000002
+					0x00000003
+					0x0000000d
+					0x00000008
+					0x0000000a
+					0x00000001
+					0x00000002
+					0x00000009
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000006
+					0x06050202
+					0x0010090d
+					0x7428180e
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-600000000 {
+				clock-frequency = <600000000>;
+
+				nvidia,emem-configuration = <
+					0x00000009
+					0x80000040
+					0x00000003
+					0x00000004
+					0x0000000e
+					0x00000009
+					0x0000000b
+					0x00000001
+					0x00000003
+					0x0000000b
+					0x00000002
+					0x00000002
+					0x00000005
+					0x00000007
+					0x07050202
+					0x00130b0e
+					0x73a91b0f
+					0x70000f03
+					0x001f0000
+				>;
+			};
+
+			timing-792000000 {
+				clock-frequency = <792000000>;
+
+				nvidia,emem-configuration = <
+					0x0e00000b
+					0x80000040
+					0x00000004
+					0x00000005
+					0x00000013
+					0x0000000c
+					0x0000000f
+					0x00000002
+					0x00000003
+					0x0000000c
+					0x00000002
+					0x00000002
+					0x00000006
+					0x00000008
+					0x08060202
+					0x00160d13
+					0x734c2414
+					0x70000f02
+					0x001f0000
+				>;
+			};
+		};
+	};
+
 	external-memory-controller@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
@@ -1751,310 +2056,16 @@
 					0x0000000f
 				>;
 			};
-
 		};
 	};
 
-	memory-controller@70019000 {
-		emc-timings-1 {
-			nvidia,ram-code = <1>;
-
-
-			timing-12750000 {
-				clock-frequency = <12750000>;
-
-				nvidia,emem-configuration = <
-					0x40040001
-					0x8000000a
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0402
-					0x77e30303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-20400000 {
-				clock-frequency = <20400000>;
-
-				nvidia,emem-configuration = <
-					0x40020001
-					0x80000012
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0402
-					0x76230303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-40800000 {
-				clock-frequency = <40800000>;
-
-				nvidia,emem-configuration = <
-					0xa0000001
-					0x80000017
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0402
-					0x74a30303
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-68000000 {
-				clock-frequency = <68000000>;
-
-				nvidia,emem-configuration = <
-					0x00000001
-					0x8000001e
-					0x00000001
-					0x00000001
-					0x00000002
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0402
-					0x74230403
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-102000000 {
-				clock-frequency = <102000000>;
-
-				nvidia,emem-configuration = <
-					0x08000001
-					0x80000026
-					0x00000001
-					0x00000001
-					0x00000003
-					0x00000000
-					0x00000002
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000003
-					0x00000006
-					0x06030203
-					0x000a0403
-					0x73c30504
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-204000000 {
-				clock-frequency = <204000000>;
-
-				nvidia,emem-configuration = <
-					0x01000003
-					0x80000040
-					0x00000001
-					0x00000001
-					0x00000005
-					0x00000002
-					0x00000004
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000003
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040203
-					0x000a0405
-					0x73840a06
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-300000000 {
-				clock-frequency = <300000000>;
-
-				nvidia,emem-configuration = <
-					0x08000004
-					0x80000040
-					0x00000001
-					0x00000002
-					0x00000007
-					0x00000004
-					0x00000005
-					0x00000001
-					0x00000002
-					0x00000007
-					0x00000002
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040202
-					0x000b0607
-					0x77450e08
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-396000000 {
-				clock-frequency = <396000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000005
-					0x80000040
-					0x00000001
-					0x00000002
-					0x00000009
-					0x00000005
-					0x00000007
-					0x00000001
-					0x00000002
-					0x00000008
-					0x00000002
-					0x00000002
-					0x00000004
-					0x00000006
-					0x06040202
-					0x000d0709
-					0x7586120a
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-528000000 {
-				clock-frequency = <528000000>;
-
-				nvidia,emem-configuration = <
-					0x0f000007
-					0x80000040
-					0x00000002
-					0x00000003
-					0x0000000d
-					0x00000008
-					0x0000000a
-					0x00000001
-					0x00000002
-					0x00000009
-					0x00000002
-					0x00000002
-					0x00000005
-					0x00000006
-					0x06050202
-					0x0010090d
-					0x7428180e
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-600000000 {
-				clock-frequency = <600000000>;
-
-				nvidia,emem-configuration = <
-					0x00000009
-					0x80000040
-					0x00000003
-					0x00000004
-					0x0000000e
-					0x00000009
-					0x0000000b
-					0x00000001
-					0x00000003
-					0x0000000b
-					0x00000002
-					0x00000002
-					0x00000005
-					0x00000007
-					0x07050202
-					0x00130b0e
-					0x73a91b0f
-					0x70000f03
-					0x001f0000
-				>;
-			};
-
-			timing-792000000 {
-				clock-frequency = <792000000>;
-
-				nvidia,emem-configuration = <
-					0x0e00000b
-					0x80000040
-					0x00000004
-					0x00000005
-					0x00000013
-					0x0000000c
-					0x0000000f
-					0x00000002
-					0x00000003
-					0x0000000c
-					0x00000002
-					0x00000002
-					0x00000006
-					0x00000008
-					0x08060202
-					0x00160d13
-					0x734c2414
-					0x70000f02
-					0x001f0000
-				>;
-			};
-		};
+	opp-table-actmon {
+		/delete-node/ opp-924000000;
+		/delete-node/ opp-1200000000;
 	};
-};
-
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@924000000,1100;
-	/delete-node/ opp@1200000000,1100;
-};
 
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp@924000000;
-	/delete-node/ opp@1200000000;
+	opp-table-emc {
+		/delete-node/ opp-924000000-1100;
+		/delete-node/ opp-1200000000-1100;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
index 677babde6460..432540c10065 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
@@ -15,26 +15,23 @@
 		     "google,nyan-blaze-rev0", "google,nyan-blaze",
 		     "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
-		compatible = "samsung,ltn140at29-301";
-
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-max98090-nyan-blaze",
-			     "nvidia,tegra-audio-max98090-nyan",
-			     "nvidia,tegra-audio-max98090";
-		nvidia,model = "GoogleNyanBlaze";
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "samsung,ltn140at29-301";
+					power-supply = <&vdd_3v3_panel>;
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 
-		pinmux_default: common {
+		pinmux_default: pinmux {
 			clk_32k_out_pa0 {
 				nvidia,pins = "clk_32k_out_pa0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -1339,4 +1336,11 @@
 			};
 		};
 	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-max98090-nyan-blaze",
+			     "nvidia,tegra-audio-max98090-nyan",
+			     "nvidia,tegra-audio-max98090";
+		nvidia,model = "GoogleNyanBlaze";
+	};
 };
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index 5f71add38dfe..56952333ae28 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "tegra124.dtsi"
 
 / {
@@ -61,7 +62,7 @@
 		};
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		status = "okay";
 
 		vdd-supply = <&vdd_gpu>;
@@ -87,11 +88,11 @@
 			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
 		};
 
-		temperature-sensor@4c {
+		tmp451: temperature-sensor@4c {
 			compatible = "ti,tmp451";
 			reg = <0x4c>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>;
 
 			#thermal-sensor-cells = <1>;
 		};
@@ -390,6 +391,10 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	cec@70015000 {
+		status = "okay";
+	};
+
 	hda@70030000 {
 		status = "okay";
 	};
@@ -466,6 +471,7 @@
 				vbus-supply = <&vdd_usb1_vbus>;
 				status = "okay";
 				mode = "otg";
+				usb-role-switch;
 			};
 
 			usb2-1 {
@@ -492,12 +498,6 @@
 		};
 	};
 
-	sdhci0_pwrseq: sdhci0_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-
-		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
-	};
-
 	mmc@700b0000 { /* WiFi/BT on this bus */
 		status = "okay";
 		bus-width = <4>;
@@ -527,7 +527,7 @@
 
 	/* CPU DFLL clock */
 	clock@70110000 {
-		status = "disabled";
+		status = "okay";
 		vdd-cpu-supply = <&vdd_cpu>;
 		nvidia,i2c-fs-rate = <400000>;
 	};
@@ -582,22 +582,43 @@
 			 256>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
 	};
 
 	cpus {
-		cpu@0 {
+		cpu0: cpu@0 {
+			#cooling-cells = <2>;
 			vdd-cpu-supply = <&vdd_cpu>;
 		};
+
+		cpu1: cpu@1 {
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			#cooling-cells = <2>;
+		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		lid {
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <30>;
+			wakeup-source;
+		};
+
+		switch-lid {
 			label = "Lid";
 			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
 			linux,input-type = <5>;
@@ -605,17 +626,21 @@
 			debounce-interval = <1>;
 			wakeup-source;
 		};
+	};
 
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <30>;
-			wakeup-source;
-		};
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	sdhci0_pwrseq: pwrseq-sdhci0 {
+		compatible = "mmc-pwrseq-simple";
+
+		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
 	};
 
-	vdd_mux: regulator@0 {
+	vdd_mux: regulator-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
 		regulator-min-microvolt = <12000000>;
@@ -624,7 +649,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_5v0_sys: regulator@1 {
+	vdd_5v0_sys: regulator-5v0sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -634,7 +659,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_sys: regulator@2 {
+	vdd_3v3_sys: regulator-3v3sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_SYS";
 		regulator-min-microvolt = <3300000>;
@@ -644,7 +669,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_run: regulator@3 {
+	vdd_3v3_run: regulator-3v3run {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_RUN";
 		regulator-min-microvolt = <3300000>;
@@ -656,7 +681,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_3v3_hdmi: regulator@4 {
+	vdd_3v3_hdmi: regulator-3v3hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 		regulator-min-microvolt = <3300000>;
@@ -664,7 +689,7 @@
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_led: regulator@5 {
+	vdd_led: regulator-led {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_LED";
 		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
@@ -672,7 +697,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_5v0_ts: regulator@6 {
+	vdd_5v0_ts: regulator-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_VDD_TS_SW";
 		regulator-min-microvolt = <5000000>;
@@ -683,7 +708,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb1_vbus: regulator@7 {
+	vdd_usb1_vbus: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_HS";
 		regulator-min-microvolt = <5000000>;
@@ -694,7 +719,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb3_vbus: regulator@8 {
+	vdd_usb3_vbus: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_SS";
 		regulator-min-microvolt = <5000000>;
@@ -705,7 +730,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_3v3_panel: regulator@9 {
+	vdd_3v3_panel: regulator-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_PANEL";
 		regulator-min-microvolt = <3300000>;
@@ -715,7 +740,7 @@
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_3v3_lp0: regulator@10 {
+	vdd_3v3_lp0: regulator-lp0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_LP0";
 		regulator-min-microvolt = <3300000>;
@@ -730,7 +755,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_hdmi_pll: regulator@11 {
+	vdd_hdmi_pll: regulator-hdmipll {
 		compatible = "regulator-fixed";
 		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
 		regulator-min-microvolt = <1050000>;
@@ -739,7 +764,7 @@
 		vin-supply = <&vdd_1v05_run>;
 	};
 
-	vdd_5v0_hdmi: regulator@12 {
+	vdd_5v0_hdmi: regulator-hdmicon {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
@@ -779,10 +804,32 @@
 				<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
 	};
 
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		priority = <200>;
+	thermal-zones {
+		cpu-skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tmp451 0>;
+
+			trips {
+				cpu_passive_trip: cpu-alert0 {
+					/* throttle at 70C until temperature drops to 69.8C */
+					temperature = <70000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_passive_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi
index 49d9420a3289..b262c1289da5 100644
--- a/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi
+++ b/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi
@@ -1,416 +1,421 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	emc_icc_dvfs_opp_table: emc-dvfs-opp-table {
+	emc_icc_dvfs_opp_table: opp-table-emc {
 		compatible = "operating-points-v2";
 
-		opp@12750000,800 {
+		opp-12750000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@12750000,950 {
+		opp-12750000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@12750000,1050 {
+		opp-12750000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@12750000,1110 {
+		opp-12750000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@20400000,800 {
+		opp-20400000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <20400000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@20400000,950 {
+		opp-20400000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <20400000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@20400000,1050 {
+		opp-20400000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <20400000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@20400000,1110 {
+		opp-20400000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <20400000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@40800000,800 {
+		opp-40800000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <40800000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@40800000,950 {
+		opp-40800000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <40800000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@40800000,1050 {
+		opp-40800000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <40800000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@40800000,1110 {
+		opp-40800000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <40800000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@68000000,800 {
+		opp-68000000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <68000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@68000000,950 {
+		opp-68000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <68000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@68000000,1050 {
+		opp-68000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <68000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@68000000,1110 {
+		opp-68000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <68000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@102000000,800 {
+		opp-102000000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@102000000,950 {
+		opp-102000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@102000000,1050 {
+		opp-102000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@102000000,1110 {
+		opp-102000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@204000000,800 {
+		opp-204000000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x0003>;
+			opp-suspend;
 		};
 
-		opp@204000000,950 {
+		opp-204000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x0008>;
+			opp-suspend;
 		};
 
-		opp@204000000,1050 {
+		opp-204000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x0010>;
+			opp-suspend;
 		};
 
-		opp@204000000,1110 {
+		opp-204000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x0004>;
+			opp-suspend;
 		};
 
-		opp@264000000,800 {
+		opp-264000000-800 {
 			opp-microvolt = <800000 800000 1150000>;
 			opp-hz = /bits/ 64 <264000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@264000000,950 {
+		opp-264000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <264000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@264000000,1050 {
+		opp-264000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <264000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@264000000,1110 {
+		opp-264000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <264000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@300000000,850 {
+		opp-300000000-850 {
 			opp-microvolt = <850000 850000 1150000>;
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@300000000,950 {
+		opp-300000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@300000000,1050 {
+		opp-300000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@300000000,1110 {
+		opp-300000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@348000000,850 {
+		opp-348000000-850 {
 			opp-microvolt = <850000 850000 1150000>;
 			opp-hz = /bits/ 64 <348000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@348000000,950 {
+		opp-348000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <348000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@348000000,1050 {
+		opp-348000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <348000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@348000000,1110 {
+		opp-348000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <348000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@396000000,950 {
+		opp-396000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <396000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@396000000,1000 {
+		opp-396000000-1000 {
 			opp-microvolt = <1000000 1000000 1150000>;
 			opp-hz = /bits/ 64 <396000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@396000000,1050 {
+		opp-396000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <396000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@396000000,1110 {
+		opp-396000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <396000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@528000000,950 {
+		opp-528000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <528000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@528000000,1000 {
+		opp-528000000-1000 {
 			opp-microvolt = <1000000 1000000 1150000>;
 			opp-hz = /bits/ 64 <528000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@528000000,1050 {
+		opp-528000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <528000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@528000000,1110 {
+		opp-528000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <528000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@600000000,950 {
+		opp-600000000-950 {
 			opp-microvolt = <950000 950000 1150000>;
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x0008>;
 		};
 
-		opp@600000000,1000 {
+		opp-600000000-1000 {
 			opp-microvolt = <1000000 1000000 1150000>;
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x0003>;
 		};
 
-		opp@600000000,1050 {
+		opp-600000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@600000000,1110 {
+		opp-600000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@792000000,1000 {
+		opp-792000000-1000 {
 			opp-microvolt = <1000000 1000000 1150000>;
 			opp-hz = /bits/ 64 <792000000>;
 			opp-supported-hw = <0x000B>;
 		};
 
-		opp@792000000,1050 {
+		opp-792000000-1050 {
 			opp-microvolt = <1050000 1050000 1150000>;
 			opp-hz = /bits/ 64 <792000000>;
 			opp-supported-hw = <0x0010>;
 		};
 
-		opp@792000000,1110 {
+		opp-792000000-1110 {
 			opp-microvolt = <1110000 1110000 1150000>;
 			opp-hz = /bits/ 64 <792000000>;
 			opp-supported-hw = <0x0004>;
 		};
 
-		opp@924000000,1100 {
+		opp-924000000-1100 {
 			opp-microvolt = <1100000 1100000 1150000>;
 			opp-hz = /bits/ 64 <924000000>;
 			opp-supported-hw = <0x0013>;
 		};
 
-		opp@1200000000,1100 {
+		opp-1200000000-1100 {
 			opp-microvolt = <1100000 1100000 1150000>;
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-supported-hw = <0x0003>;
 		};
 	};
 
-	emc_bw_dfs_opp_table: emc-bandwidth-opp-table {
+	emc_bw_dfs_opp_table: opp-table-actmon {
 		compatible = "operating-points-v2";
 
-		opp@12750000 {
+		opp-12750000 {
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <204000>;
 		};
 
-		opp@20400000 {
+		opp-20400000 {
 			opp-hz = /bits/ 64 <20400000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <326400>;
 		};
 
-		opp@40800000 {
+		opp-40800000 {
 			opp-hz = /bits/ 64 <40800000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <652800>;
 		};
 
-		opp@68000000 {
+		opp-68000000 {
 			opp-hz = /bits/ 64 <68000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <1088000>;
 		};
 
-		opp@102000000 {
+		opp-102000000 {
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <1632000>;
 		};
 
-		opp@204000000 {
+		opp-204000000 {
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <3264000>;
+			opp-suspend;
 		};
 
-		opp@264000000 {
+		opp-264000000 {
 			opp-hz = /bits/ 64 <264000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <4224000>;
 		};
 
-		opp@300000000 {
+		opp-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <4800000>;
 		};
 
-		opp@348000000 {
+		opp-348000000 {
 			opp-hz = /bits/ 64 <348000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <5568000>;
 		};
 
-		opp@396000000 {
+		opp-396000000 {
 			opp-hz = /bits/ 64 <396000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <6336000>;
 		};
 
-		opp@528000000 {
+		opp-528000000 {
 			opp-hz = /bits/ 64 <528000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <8448000>;
 		};
 
-		opp@600000000 {
+		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <9600000>;
 		};
 
-		opp@792000000 {
+		opp-792000000 {
 			opp-hz = /bits/ 64 <792000000>;
 			opp-supported-hw = <0x001F>;
 			opp-peak-kBps = <12672000>;
 		};
 
-		opp@924000000 {
+		opp-924000000 {
 			opp-hz = /bits/ 64 <924000000>;
 			opp-supported-hw = <0x0013>;
 			opp-peak-kBps = <14784000>;
 		};
 
-		opp@1200000000 {
+		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-supported-hw = <0x0003>;
 			opp-peak-kBps = <19200000>;
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index e6b54ac1ebd1..7e739879c00c 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -48,10 +48,18 @@
 		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
+
+			aux-bus {
+				panel: panel {
+					compatible = "lg,lp129qe";
+					power-supply = <&vdd_3v3_panel>;
+					backlight = <&backlight>;
+				};
+			};
 		};
 	};
 
-	gpu@0,57000000 {
+	gpu@57000000 {
 		/*
 		 * Node left disabled on purpose - the bootloader will enable
 		 * it after having set the VPR up
@@ -63,7 +71,7 @@
 		pinctrl-names = "boot";
 		pinctrl-0 = <&pinmux_boot>;
 
-		pinmux_boot: common {
+		pinmux_boot: pinmux {
 			dap_mclk1_pw4 {
 				nvidia,pins = "dap_mclk1_pw4";
 				nvidia,function = "extperiph1";
@@ -881,7 +889,8 @@
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spi-flash@0 {
+
+		flash@0 {
 			compatible = "winbond,w25q32dw", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
@@ -972,7 +981,7 @@
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
-
+				usb-role-switch;
 				vbus-supply = <&vdd_usb1_vbus>;
 			};
 
@@ -1061,7 +1070,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -1070,7 +1079,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -1079,14 +1088,7 @@
 		};
 	};
 
-	panel: panel {
-		compatible = "lg,lp129qe";
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
-	};
-
-	vdd_mux: regulator@0 {
+	vdd_mux: regulator-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
 		regulator-min-microvolt = <12000000>;
@@ -1095,7 +1097,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_5v0_sys: regulator@1 {
+	vdd_5v0_sys: regulator-5v0sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_SYS";
 		regulator-min-microvolt = <5000000>;
@@ -1105,7 +1107,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_sys: regulator@2 {
+	vdd_3v3_sys: regulator-3v3sys {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_SYS";
 		regulator-min-microvolt = <3300000>;
@@ -1115,7 +1117,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_3v3_run: regulator@3 {
+	vdd_3v3_run: regulator-3v3run {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_RUN";
 		regulator-min-microvolt = <3300000>;
@@ -1127,7 +1129,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_3v3_hdmi: regulator@4 {
+	vdd_3v3_hdmi: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
 		regulator-min-microvolt = <3300000>;
@@ -1135,7 +1137,7 @@
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_led: regulator@5 {
+	vdd_led: regulator-led {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_LED";
 		regulator-min-microvolt = <3300000>;
@@ -1145,7 +1147,7 @@
 		vin-supply = <&vdd_mux>;
 	};
 
-	vdd_5v0_ts: regulator@6 {
+	vdd_5v0_ts: regulator-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_VDD_TS_SW";
 		regulator-min-microvolt = <5000000>;
@@ -1156,7 +1158,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb1_vbus: regulator@7 {
+	vdd_usb1_vbus: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_HS";
 		regulator-min-microvolt = <5000000>;
@@ -1167,7 +1169,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_usb3_vbus: regulator@8 {
+	vdd_usb3_vbus: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_USB_SS";
 		regulator-min-microvolt = <5000000>;
@@ -1178,7 +1180,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_3v3_panel: regulator@9 {
+	vdd_3v3_panel: regulator-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_PANEL";
 		regulator-min-microvolt = <3300000>;
@@ -1188,7 +1190,7 @@
 		vin-supply = <&vdd_3v3_run>;
 	};
 
-	vdd_3v3_lp0: regulator@10 {
+	vdd_3v3_lp0: regulator-lp0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3.3V_LP0";
 		regulator-min-microvolt = <3300000>;
@@ -1203,7 +1205,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vdd_hdmi_pll: regulator@11 {
+	vdd_hdmi_pll: regulator-hdmipll {
 		compatible = "regulator-fixed";
 		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
 		regulator-min-microvolt = <1050000>;
@@ -1212,7 +1214,7 @@
 		vin-supply = <&vdd_1v05_run>;
 	};
 
-	vdd_5v0_hdmi: regulator@12 {
+	vdd_5v0_hdmi: regulator-hdmicon {
 		compatible = "regulator-fixed";
 		regulator-name = "+5V_HDMI_CON";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 0b678afb2a5c..b3fbecf5c818 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -94,8 +94,8 @@
 		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
 		clock-names = "host1x";
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA124_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
 		iommus = <&mc TEGRA_SWGROUP_HC>;
 
 		#address-cells = <2>;
@@ -223,12 +223,7 @@
 		interrupt-parent = <&gic>;
 	};
 
-	/*
-	 * Please keep the following 0, notation in place as a former mainline
-	 * U-Boot version was looking for that particular notation in order to
-	 * perform required fix-ups on that GPU node.
-	 */
-	gpu@0,57000000 {
+	gpu@57000000 {
 		compatible = "nvidia,gk20a";
 		reg = <0x0 0x57000000 0x0 0x01000000>,
 		      <0x0 0x58000000 0x0 0x01000000>;
@@ -259,7 +254,7 @@
 	};
 
 	timer@60005000 {
-		compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+		compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer";
 		reg = <0x0 0x60005000 0x0 0x400>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
@@ -283,7 +278,7 @@
 		reg = <0x0 0x60007000 0x0 0x1000>;
 	};
 
-	actmon@6000c800 {
+	actmon: actmon@6000c800 {
 		compatible = "nvidia,tegra124-actmon";
 		reg = <0x0 0x6000c800 0x0 0x400>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -295,6 +290,7 @@
 		operating-points-v2 = <&emc_bw_dfs_opp_table>;
 		interconnects = <&mc TEGRA124_MC_MPCORER &emc>;
 		interconnect-names = "cpu-read";
+		#cooling-cells = <2>;
 	};
 
 	gpio: gpio@6000d000 {
@@ -312,9 +308,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
-		/*
 		gpio-ranges = <&pinmux 0 0 251>;
-		*/
 	};
 
 	apbdma: dma@60020000 {
@@ -442,7 +436,7 @@
 	};
 
 	i2c@7000c000 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000c000 0x0 0x100>;
 		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -457,7 +451,7 @@
 	};
 
 	i2c@7000c400 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000c400 0x0 0x100>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -472,7 +466,7 @@
 	};
 
 	i2c@7000c500 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000c500 0x0 0x100>;
 		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -487,7 +481,7 @@
 	};
 
 	i2c@7000c700 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000c700 0x0 0x100>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -502,7 +496,7 @@
 	};
 
 	i2c@7000d000 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000d000 0x0 0x100>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -517,7 +511,7 @@
 	};
 
 	i2c@7000d100 {
-		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		compatible = "nvidia,tegra124-i2c";
 		reg = <0x0 0x7000d100 0x0 0x100>;
 		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -645,6 +639,16 @@
 		reset-names = "fuse";
 	};
 
+	cec@70015000 {
+		compatible = "nvidia,tegra124-cec";
+		reg = <0x0 0x70015000 0x0 0x00001000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_CEC>;
+		clock-names = "cec";
+		status = "disabled";
+		hdmi-phandle = <&hdmi>;
+	};
+
 	mc: memory-controller@70019000 {
 		compatible = "nvidia,tegra124-mc";
 		reg = <0x0 0x70019000 0x0 0x1000>;
@@ -676,10 +680,8 @@
 		      <0x0 0x70020000 0x0 0x7000>; /* SATA */
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_SATA>,
-			 <&tegra_car TEGRA124_CLK_SATA_OOB>,
-			 <&tegra_car TEGRA124_CLK_CML1>,
-			 <&tegra_car TEGRA124_CLK_PLL_E>;
-		clock-names = "sata", "sata-oob", "cml1", "pll_e";
+			 <&tegra_car TEGRA124_CLK_SATA_OOB>;
+		clock-names = "sata", "sata-oob";
 		resets = <&tegra_car 124>,
 			 <&tegra_car 129>,
 			 <&tegra_car 123>;
@@ -716,8 +718,8 @@
 			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
-			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
 			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
@@ -725,7 +727,7 @@
 			 <&tegra_car TEGRA124_CLK_PLL_E>;
 		clock-names = "xusb_host", "xusb_host_src",
 			      "xusb_falcon_src", "xusb_ss",
-			      "xusb_ss_src", "xusb_ss_div2",
+			      "xusb_ss_div2", "xusb_ss_src",
 			      "xusb_hs_src", "xusb_fs_src",
 			      "pll_u_480m", "clk_m", "pll_e";
 		resets = <&tegra_car 89>, <&tegra_car 156>,
@@ -914,16 +916,6 @@
 		status = "disabled";
 	};
 
-	cec@70015000 {
-		compatible = "nvidia,tegra124-cec";
-		reg = <0x0 0x70015000 0x0 0x00001000>;
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA124_CLK_CEC>;
-		clock-names = "cec";
-		status = "disabled";
-		hdmi-phandle = <&hdmi>;
-	};
-
 	soctherm: thermal-sensor@700e2000 {
 		compatible = "nvidia,tegra124-soctherm";
 		reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */
@@ -1078,7 +1070,7 @@
 	};
 
 	usb@7d000000 {
-		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
 		reg = <0x0 0x7d000000 0x0 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -1093,6 +1085,7 @@
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d000000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USBD>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1112,11 +1105,12 @@
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
 	usb@7d004000 {
-		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
 		reg = <0x0 0x7d004000 0x0 0x4000>;
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -1131,6 +1125,7 @@
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d004000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USB2>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1149,11 +1144,12 @@
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 1>;
 		status = "disabled";
 	};
 
 	usb@7d008000 {
-		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
 		reg = <0x0 0x7d008000 0x0 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -1168,6 +1164,7 @@
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d008000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA124_CLK_USB3>,
 			 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1186,6 +1183,7 @@
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};
 
@@ -1240,7 +1238,7 @@
 	};
 
 	thermal-zones {
-		cpu {
+		cpu-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
@@ -1268,7 +1266,7 @@
 			};
 		};
 
-		mem {
+		mem-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
@@ -1296,7 +1294,7 @@
 			};
 		};
 
-		gpu {
+		gpu-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
@@ -1324,7 +1322,7 @@
 			};
 		};
 
-		pllx {
+		pllx-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <1000>;
 
diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index d3b99535d755..08b42952f4de 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
+#include <dt-bindings/input/atmel-maxtouch.h>
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -341,57 +342,74 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
 			};
+
 			pta {
 				nvidia,pins = "pta";
 				nvidia,function = "rsvd4";
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
+
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
+				nvidia,function = "rsvd4";
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
+
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
+				nvidia,function = "i2c2";
 			};
 		};
 	};
 
+	tegra_spdif: spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
 	tegra_i2s1: i2s@70002800 {
 		status = "okay";
+
+		nvidia,fixed-parent-rate;
 	};
 
 	uartb: serial@70006040 {
 		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
 		/* GPS BCM4751 */
 	};
 
 	uartc: serial@70006200 {
 		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 
 		/* Azurewave AW-NH665 BCM4329B1 */
 		bluetooth {
 			compatible = "brcm,bcm4329-bt";
 
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
 			/* PLLP 216MHz / 16 / 4 */
 			max-speed = <3375000>;
 
@@ -402,8 +420,7 @@
 			vddio-supply = <&vdd_1v8_sys>;
 
 			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
-			host-wakeup-gpios =   <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
-			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -411,6 +428,10 @@
 		/* Docking station */
 	};
 
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
 	i2c@7000c000 {
 		clock-frequency = <400000>;
 		status = "okay";
@@ -420,11 +441,14 @@
 			reg = <0x1a>;
 
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_BOTH>;
 
 			gpio-controller;
 			#gpio-cells = <2>;
 
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+
 			gpio-cfg = <
 				0x0000 /* MIC_LR_OUT#    GPIO, output, low */
 				0x0000 /* FM2018-enable  GPIO, output, low */
@@ -448,8 +472,10 @@
 
 			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
 
-			avdd-supply = <&vdd_3v3_sys>;
+			vdda-supply = <&vdd_3v3_sys>;
 			vdd-supply  = <&vdd_3v3_sys>;
+
+			atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
 		};
 
 		gyroscope@68 {
@@ -477,6 +503,9 @@
 					interrupt-parent = <&gpio>;
 					interrupts = <TEGRA_GPIO(S, 7) IRQ_TYPE_EDGE_RISING>;
 
+					vdd-supply   = <&vdd_1v8_sys>;
+					vddio-supply = <&vdd_1v8_sys>;
+
 					mount-matrix =	 "0",  "1",  "0",
 							 "1",  "0",  "0",
 							 "0",  "0", "-1";
@@ -490,51 +519,12 @@
 		status = "okay";
 	};
 
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		panel_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			embedded-controller@58 {
-				compatible = "acer,a500-iconia-ec", "ene,kb930";
-				reg = <0x58>;
-
-				system-power-controller;
-
-				monitored-battery = <&bat1010>;
-				power-supplies = <&mains>;
-			};
-		};
-	};
-
-	pwm: pwm@7000a000 {
-		status = "okay";
-	};
-
 	i2c@7000d000 {
 		clock-frequency = <100000>;
 		status = "okay";
 
 		magnetometer@c {
-			compatible = "ak,ak8975";
+			compatible = "asahi-kasei,ak8975";
 			reg = <0x0c>;
 
 			interrupt-parent = <&gpio>;
@@ -575,7 +565,7 @@
 
 				vdd_core: sm0 {
 					regulator-name = "vdd_sm0,vdd_core";
-					regulator-min-microvolt = <1200000>;
+					regulator-min-microvolt = <950000>;
 					regulator-max-microvolt = <1300000>;
 					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
 					regulator-coupled-max-spread = <170000 550000>;
@@ -616,7 +606,7 @@
 
 				rtc_vdd: ldo2 {
 					regulator-name = "vdd_ldo2,vdd_rtc";
-					regulator-min-microvolt = <1200000>;
+					regulator-min-microvolt = <950000>;
 					regulator-max-microvolt = <1300000>;
 					regulator-coupled-with = <&vdd_core &vdd_cpu>;
 					regulator-coupled-max-spread = <170000 550000>;
@@ -688,6 +678,10 @@
 			compatible = "onnn,nct1008";
 			reg = <0x4c>;
 			vcc-supply = <&vdd_3v3_sys>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
 			#thermal-sensor-cells = <1>;
 		};
 	};
@@ -700,380 +694,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <458>;
 		nvidia,sys-clock-req-active-high;
-	};
-
-	usb@c5000000 {
-		compatible = "nvidia,tegra20-udc";
-		status = "okay";
-		dr_mode = "peripheral";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-		dr_mode = "peripheral";
-		nvidia,xcvr-setup-use-fuses;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		vbus-supply = <&vdd_vbus1>;
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-		nvidia,xcvr-setup-use-fuses;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		vbus-supply = <&vdd_vbus3>;
-	};
-
-	brcm_wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-
-		clocks = <&rtc_32k_wifi>;
-		clock-names = "ext_clock";
-
-		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
-		post-power-on-delay-ms = <300>;
-		power-off-delay-us = <300>;
-	};
-
-	sdmmc1: mmc@c8000000 {
-		status = "okay";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
-		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
-		assigned-clock-rates = <50000000>;
-
-		max-frequency = <50000000>;
-		keep-power-in-suspend;
-		bus-width = <4>;
-		non-removable;
-
-		mmc-pwrseq = <&brcm_wifi_pwrseq>;
-		vmmc-supply = <&vdd_3v3_sys>;
-		vqmmc-supply = <&vdd_3v3_sys>;
-
-		/* Azurewave AW-NH611 BCM4329 */
-		wifi@1 {
-			reg = <1>;
-			compatible = "brcm,bcm4329-fmac";
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "host-wake";
-		};
-	};
-
-	sdmmc3: mmc@c8000400 {
-		status = "okay";
-		bus-width = <4>;
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
-		vmmc-supply = <&vdd_3v3_sys>;
-		vqmmc-supply = <&vdd_3v3_sys>;
-	};
-
-	sdmmc4: mmc@c8000600 {
-		status = "okay";
-		bus-width = <8>;
-		vmmc-supply = <&vcore_emmc>;
-		vqmmc-supply = <&vdd_3v3_sys>;
-		non-removable;
-	};
-
-	mains: ac-adapter-detect {
-		compatible = "gpio-charger";
-		charger-type = "mains";
-		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_3v3_sys>;
-		pwms = <&pwm 2 41667>;
-
-		brightness-levels = <7 255>;
-		num-interpolated-steps = <248>;
-		default-brightness-level = <20>;
-	};
-
-	bat1010: battery-2s1p {
-		compatible = "simple-battery";
-		charge-full-design-microamp-hours = <3260000>;
-		energy-full-design-microwatt-hours = <24000000>;
-		operating-range-celsius = <0 40>;
-	};
-
-	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
-	clk32k_in: clock@0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "tps658621-out32k";
-	};
-
-	/*
-	 * This standalone onboard fixed-clock always-ON 32KHz
-	 * oscillator is used as a reference clock-source by the
-	 * Azurewave WiFi/BT module.
-	 */
-	rtc_32k_wifi: clock@1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "kk3270032";
-	};
-
-	cpus {
-		cpu0: cpu@0 {
-			cpu-supply = <&vdd_cpu>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-		};
-
-		cpu@1 {
-			cpu-supply = <&vdd_cpu>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
-
-	display-panel {
-		compatible = "auo,b101ew05", "panel-lvds";
-
-		ddc-i2c-bus = <&panel_ddc>;
-		power-supply = <&vdd_pnl>;
-		backlight = <&backlight>;
-
-		width-mm = <218>;
-		height-mm = <135>;
-
-		data-mapping = "jeida-18";
-
-		panel-timing {
-			clock-frequency = <71200000>;
-			hactive = <1280>;
-			vactive = <800>;
-			hfront-porch = <8>;
-			hback-porch = <18>;
-			hsync-len = <184>;
-			vsync-len = <3>;
-			vfront-porch = <4>;
-			vback-porch = <8>;
-		};
-
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&lvds_encoder_output>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		rotation-lock {
-			label = "Rotate-lock";
-			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
-			linux,code = <SW_ROTATE_LOCK>;
-			linux,input-type = <EV_SW>;
-			debounce-interval = <10>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-	};
-
-	haptic-feedback {
-		compatible = "gpio-vibrator";
-		enable-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
-		vcc-supply = <&vdd_3v3_sys>;
-	};
-
-	lvds-encoder {
-		compatible = "ti,sn75lvds83", "lvds-encoder";
-
-		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
-		power-supply = <&vdd_3v3_sys>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lvds_encoder_input: endpoint {
-					remote-endpoint = <&lcd_output>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				lvds_encoder_output: endpoint {
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-	};
-
-	vdd_5v0_sys: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	vdd_3v3_sys: regulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_3v3_vs";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_1v8_sys: regulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_1v8_vs";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_pnl: regulator@3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_panel";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-enable-ramp-delay = <300000>;
-		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_vbus1: regulator@4 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_usb1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_vbus3: regulator@5 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_usb3_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		gpio = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	sound {
-		compatible = "nvidia,tegra-audio-wm8903-picasso",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "Acer Iconia Tab A500 WM8903";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "LINEOUTL",
-			"Int Spk", "LINEOUTR",
-			"Mic Jack", "MICBIAS",
-			"IN2L", "Mic Jack",
-			"IN2R", "Mic Jack",
-			"IN1L", "Int Mic",
-			"IN1R", "Int Mic";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
-		nvidia,int-mic-en-gpios = <&wm8903 1 GPIO_ACTIVE_HIGH>;
-		nvidia,headset;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-
-	thermal-zones {
-		skin-thermal {
-			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <0>; /* milliseconds */
-
-			thermal-sensors = <&nct1008 0>;
-		};
-
-		cpu-thermal {
-			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <5000>; /* milliseconds */
-
-			thermal-sensors = <&nct1008 1>;
-
-			trips {
-				trip0: cpu-alert0 {
-					/* start throttling at 50C */
-					temperature = <50000>;
-					hysteresis = <3000>;
-					type = "passive";
-				};
-
-				trip1: cpu-crit {
-					/* shut down at 60C */
-					temperature = <60000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&trip0>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
+		core-supply = <&vdd_core>;
 	};
 
 	memory-controller@7000f400 {
@@ -1081,6 +702,7 @@
 
 		emc-tables@0 {
 			nvidia,ram-code = <0>; /* elpida-8gb */
+			reg = <0>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1178,6 +800,7 @@
 
 		emc-tables@1 {
 			nvidia,ram-code = <1>; /* elpida-4gb */
+			reg = <1>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1275,6 +898,7 @@
 
 		emc-tables@2 {
 			nvidia,ram-code = <2>; /* hynix-8gb */
+			reg = <2>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1372,6 +996,7 @@
 
 		emc-tables@3 {
 			nvidia,ram-code = <3>; /* hynix-4gb */
+			reg = <3>;
 
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1467,9 +1092,434 @@
 			};
 		};
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@666000000;
-	/delete-node/ opp@760000000;
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	sdmmc1: mmc@c8000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_1v8_sys>;
+
+		/* Azurewave AW-NH611 BCM4329 */
+		wifi@1 {
+			reg = <1>;
+			compatible = "brcm,bcm4329-fmac";
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc3: mmc@c8000400 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	sdmmc4: mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+		non-removable;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_3v3_sys>;
+		pwms = <&pwm 2 41667>;
+
+		brightness-levels = <7 255>;
+		num-interpolated-steps = <248>;
+		default-brightness-level = <20>;
+	};
+
+	bat1010: battery-2s1p {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3260000>;
+		energy-full-design-microwatt-hours = <24000000>;
+		operating-range-celsius = <0 40>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k-in {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "tps658621-out32k";
+	};
+
+	/*
+	 * This standalone onboard fixed-clock always-ON 32KHz
+	 * oscillator is used as a reference clock-source by the
+	 * Azurewave WiFi/BT module.
+	 */
+	rtc_32k_wifi: clock-32k-wifi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "kk3270032";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	display-panel {
+		compatible = "auo,b101ew05", "panel-lvds";
+
+		ddc-i2c-bus = <&panel_ddc>;
+		power-supply = <&vdd_pnl>;
+		backlight = <&backlight>;
+
+		width-mm = <218>;
+		height-mm = <135>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <71200000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <8>;
+			hback-porch = <18>;
+			hsync-len = <184>;
+			vsync-len = <3>;
+			vfront-porch = <4>;
+			vback-porch = <8>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-rotation-lock {
+			label = "Rotate-lock";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
+			linux,code = <SW_ROTATE_LOCK>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		panel_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			embedded-controller@58 {
+				compatible = "acer,a500-iconia-ec", "ene,kb930";
+				reg = <0x58>;
+
+				system-power-controller;
+
+				monitored-battery = <&bat1010>;
+				power-supplies = <&mains>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-666000000;
+		/delete-node/ opp-760000000;
+	};
+
+	vdd_5v0_sys: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_vs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_1v8_sys: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_vs";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_pnl: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <300000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-picasso",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Acer Iconia Tab A500 WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "LINEOUTL",
+			"Int Spk", "LINEOUTR",
+			"Mic Jack", "MICBIAS",
+			"IN2L", "Mic Jack",
+			"IN2R", "Mic Jack",
+			"IN1L", "Int Mic",
+			"IN1R", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,int-mic-en-gpios = <&wm8903 1 GPIO_ACTIVE_HIGH>;
+		nvidia,headset;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		/*
+		 * NCT1008 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone is a simpler solution which prevents A500 from
+		 * getting too hot from a user's tactile perspective.
+		 * The CPU zone is intended to protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* start throttling at 60C */
+					temperature = <60000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 70C */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&rtc_32k_wifi>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra20-asus-tf101.dts b/arch/arm/boot/dts/tegra20-asus-tf101.dts
new file mode 100644
index 000000000000..c2a9c3fb5b33
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-asus-tf101.dts
@@ -0,0 +1,1291 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/atmel-maxtouch.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "ASUS EeePad Transformer TF101";
+	compatible = "asus,tf101", "nvidia,tegra20";
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* MicroSD */
+		mmc2 = &sdmmc1; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd;
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@2ffe0000 {
+			compatible = "ramoops";
+			reg = <0x2ffe0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		linux,cma@30000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x30000000 0x10000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port@0 {
+					lcd_output: endpoint {
+						remote-endpoint = <&lvds_encoder_input>;
+						bus-width = <18>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+			hdmi-supply = <&vdd_hdmi_en>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio@6000d000 {
+		charging-enable-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+
+			lm1 {
+				nvidia,pins = "lm1";
+				nvidia,function = "rsvd3";
+			};
+
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+
+			gpv {
+				nvidia,pins = "gpv", "slxa";
+				nvidia,function = "pcie";
+			};
+
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
+					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk";
+				nvidia,function = "sdio3";
+			};
+
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+
+			slxd {
+				nvidia,pins = "slxd";
+				nvidia,function = "spdif";
+			};
+
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap4",
+					"dte", "ddc", "dtf", "gma", "gmc",
+					"gme", "gpu", "gpu7", "gpv", "i2cp",
+					"irrx", "irtx", "pta", "rm", "sdc",
+					"sdd", "slxc", "slxd", "slxk", "spdi",
+					"spdo", "uac", "uad",
+					"uda", "csus";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf_ate {
+				nvidia,pins = "ate", "dap2", "dap3", "gmb", "gmd",
+					"owc", "spia", "spib", "spic",
+					"spid", "spie", "spig", "slxa";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+
+			conf_crtp {
+				nvidia,pins = "crtp", "spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf_spif {
+				nvidia,pins = "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "uaa", "uab",
+					"uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+					"lvp1", "lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1", "drive_ddc", "drive_vi1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			drive_csus {
+				nvidia,pins = "drive_csus";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_idle: pinmux-i2cmux-idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux-i2cmux-pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+	};
+
+	spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	i2s@70002800 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
+		/* GPS BCM4751 */
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			/* PLLP 216MHz / 16 / 4 */
+			max-speed = <3375000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_sys>;
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0xe>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			dvdd-supply = <&vdd_1v8_sys>;
+
+			mount-matrix = "-1",  "0",  "0",
+					"0",  "1",  "0",
+					"0",  "0", "-1";
+		};
+
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_BOTH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0x83>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <
+				0x00000600 /* DMIC_LR, output */
+				0x00000680 /* DMIC_DAT, input */
+				0x00000000 /* Speaker-enable GPIO, output, low */
+				0xffffffff /* don't touch */
+				0xffffffff /* don't touch */
+			>;
+
+			AVDD-supply  = <&vdd_1v8_sys>;
+			CPVDD-supply = <&vdd_1v8_sys>;
+			DBVDD-supply = <&vdd_1v8_sys>;
+			DCVDD-supply = <&vdd_1v8_sys>;
+		};
+
+		/* Atmel MXT1386 Touchscreen */
+		touchscreen@5b {
+			compatible = "atmel,maxtouch";
+			reg = <0x5b>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+
+			atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply    = <&vdd_3v3_sys>;
+			vlogic-supply = <&vdd_1v8_sys>;
+
+			mount-matrix =	 "0",  "1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0",  "1";
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0xf>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(N, 4) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_sys>;
+					vddio-supply = <&vdd_1v8_sys>;
+
+					mount-matrix =	"-1",  "0",  "0",
+							 "0", "-1",  "0",
+							 "0",  "0", "-1";
+				};
+			};
+		};
+	};
+
+	i2c2: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_sys>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				vdd_cpu: sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-coupled-with = <&vdd_core &rtc_vdd>;
+					regulator-coupled-max-spread = <550000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				rtc_vdd: ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&vdd_core &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-rtc-regulator;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		nct1008: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&vdd_3v3_sys>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@3 {
+			reg = <0x3>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007dc010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e0 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e0010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			lpddr2 {
+				compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
+				revision-id = <1 0>;
+				density = <2048>;
+				io-width = <16>;
+			};
+		};
+	};
+
+	/* Peripheral USB via ASUS connector */
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		nvidia,xcvr-setup-use-fuses;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	sdmmc1: mmc@c8000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
+		assigned-clock-rates = <40000000>;
+
+		max-frequency = <40000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc3: mmc@c8000400 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	sdmmc4: mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+		non-removable;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_3v3_sys>;
+		pwms = <&pwm 2 4000000>;
+
+		brightness-levels = <7 255>;
+		num-interpolated-steps = <248>;
+		default-brightness-level = <20>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k-in {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	display-panel {
+		compatible = "auo,b101ew05", "panel-lvds";
+
+		/* AUO B101EW05 using custom timings */
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+		power-supply = <&vdd_pnl_reg>;
+
+		width-mm = <218>;
+		height-mm = <135>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <71200000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <8>;
+			hback-porch = <18>;
+			hsync-len = <184>;
+			vsync-len = <3>;
+			vfront-porch = <4>;
+			vback-porch = <8>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		switch-dock-hall-sensor {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c2>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smart-battery@b {
+				compatible = "ti,bq20z75", "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <10>;
+				power-supplies = <&mains>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-666000000;
+		/delete-node/ opp-760000000;
+	};
+
+	vdd_5v0_sys: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_vs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie_vdd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	vdd_pnl_reg: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_1v8_sys: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_vs";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_hdmi_en: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_hdmi_en";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+		gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-wm8903-tf101",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Asus EeePad Transformer WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"IN2L", "Mic Jack",
+			"DMICDAT", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
+		nvidia,coupled-mic-hp-det;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		/*
+		 * NCT1008 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone is a simpler solution which prevents TF101 from
+		 * getting too hot from a user's tactile perspective.
+		 * The CPU zone is intended to protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* start throttling at 60C */
+					temperature = <60000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 70C */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+		power-off-delay-us = <200>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
index a05fb3853da8..612f4e54cb20 100644
--- a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
@@ -70,11 +70,11 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			pwm-a-b {
+			sdc {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			pwm-c-d {
+			sdb_sdd {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
@@ -143,6 +143,24 @@
 		status = "okay";
 	};
 
+	/* SPI4: Colibri SSP */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			/* CAN_INT */
+			interrupts = <TEGRA_GPIO(A, 0) IRQ_TYPE_EDGE_FALLING>;
+			spi-max-frequency = <10000000>;
+			vdd-supply = <&reg_3v3>;
+			xceiver-supply = <&reg_5v0>;
+		};
+	};
+
 	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
 	usb@c5000000 {
 		status = "okay";
@@ -164,24 +182,6 @@
 		vbus-supply = <&reg_usbh_vbus>;
 	};
 
-	/* SPI4: Colibri SSP */
-	spi@7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-
-		can@0 {
-			compatible = "microchip,mcp2515";
-			reg = <0>;
-			clocks = <&clk16m>;
-			interrupt-parent = <&gpio>;
-			/* CAN_INT */
-			interrupts = <TEGRA_GPIO(A, 0) IRQ_TYPE_EDGE_FALLING>;
-			spi-max-frequency = <10000000>;
-			vdd-supply = <&reg_3v3>;
-			xceiver-supply = <&reg_5v0>;
-		};
-	};
-
 	/* SD/MMC */
 	mmc@c8000600 {
 		status = "okay";
@@ -200,7 +200,7 @@
 		pwms = <&pwm 0 5000000>; /* PWM<A> */
 	};
 
-	clk16m: osc3 {
+	clk16m: clock-osc3 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <16000000>;
@@ -209,7 +209,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "SODIMM pin 45 wakeup";
 			gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts
index 425494b9ed54..25a9f5dfe62d 100644
--- a/arch/arm/boot/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts
@@ -70,11 +70,11 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			pwm-a-b {
+			sdc {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
-			pwm-c-d {
+			sdb_sdd {
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
@@ -143,6 +143,12 @@
 		status = "okay";
 	};
 
+	/* SPI4: Colibri SSP */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+	};
+
 	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
 	usb@c5000000 {
 		status = "okay";
@@ -164,12 +170,6 @@
 		vbus-supply = <&reg_usbh_vbus>;
 	};
 
-	/* SPI4: Colibri SSP */
-	spi@7000da00 {
-		status = "okay";
-		spi-max-frequency = <25000000>;
-	};
-
 	/* SD/MMC */
 	mmc@c8000600 {
 		status = "okay";
@@ -191,7 +191,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "SODIMM pin 45 wakeup";
 			gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi
index 585a5b441cf6..0e03910abbe6 100644
--- a/arch/arm/boot/dts/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri.dtsi
@@ -27,6 +27,31 @@
 		};
 	};
 
+	gpio@6000d000 {
+		lan-reset-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "LAN_RESET#";
+		};
+
+		/* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
+		npwe-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "Tri-state nPWE";
+		};
+
+		/* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
+		rdnwr-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "Not tri-state RDnWR";
+		};
+	};
+
 	pinmux@70000014 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -113,7 +138,7 @@
 			};
 
 			/* Colibri Backlight PWM<A>, PWM<B> */
-			pwm-a-b {
+			sdc {
 				nvidia,pins = "sdc";
 				nvidia,function = "pwm";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
@@ -242,7 +267,7 @@
 			};
 
 			/* Colibri PWM<C>, PWM<D> */
-			pwm-c-d {
+			sdb_sdd {
 				nvidia,pins = "sdb", "sdd";
 				nvidia,function = "pwm";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
@@ -428,10 +453,12 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	nand-controller@70008000 {
@@ -495,7 +522,7 @@
 					regulator-always-on;
 				};
 
-				sm0 {
+				vdd_core: sm0 {
 					regulator-name = "VDD_CORE_1.2V";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
@@ -601,6 +628,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <3875>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 
 		/* Set SLEEP MODE bit in SUPPLYENE register of TPS658643 PMIC */
 		i2c-thermtrip {
@@ -688,7 +716,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		asix@1 {
+		ethernet@1 {
+			compatible = "usbb95,772b";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00];
 		};
@@ -701,12 +730,16 @@
 		vbus-supply = <&reg_lan_v_bus>;
 	};
 
-	clk32k_in: xtal3 {
+	clk32k_in: clock-xtal3 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 	};
 
+	opp-table-emc {
+		/delete-node/ opp-760000000;
+	};
+
 	reg_lan_v_bus: regulator-lan-v-bus {
 		compatible = "regulator-fixed";
 		regulator-name = "LAN_V_BUS";
@@ -741,32 +774,3 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };
-
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@760000000;
-};
-
-&gpio {
-	lan-reset-n {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LAN_RESET#";
-	};
-
-	/* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
-	npwe {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "Tri-state nPWE";
-	};
-
-	/* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
-	rdnwr {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "Not tri-state RDnWR";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi
index 6f3e8c5fc5f0..7330c1b13d93 100644
--- a/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi
+++ b/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi
@@ -1,164 +1,164 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	cpu0_opp_table: cpu_opp_table0 {
-		opp@216000000,750 {
+	cpu0_opp_table: opp-table-cpu0 {
+		opp-216000000-750 {
 			opp-microvolt = <750000 750000 1125000>;
 		};
 
-		opp@216000000,800 {
+		opp-216000000-800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@312000000,750 {
+		opp-312000000-750 {
 			opp-microvolt = <750000 750000 1125000>;
 		};
 
-		opp@312000000,800 {
+		opp-312000000-800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@456000000,750 {
+		opp-456000000-750 {
 			opp-microvolt = <750000 750000 1125000>;
 		};
 
-		opp@456000000,800 {
+		opp-456000000-800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@456000000,825 {
+		opp-456000000-825 {
 			opp-microvolt = <825000 825000 1125000>;
 		};
 
-		opp@608000000,750 {
+		opp-608000000-750 {
 			opp-microvolt = <750000 750000 1125000>;
 		};
 
-		opp@608000000,800 {
+		opp-608000000-800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@608000000,825 {
+		opp-608000000-825 {
 			opp-microvolt = <825000 825000 1125000>;
 		};
 
-		opp@608000000,850 {
+		opp-608000000-850 {
 			opp-microvolt = <850000 850000 1125000>;
 		};
 
-		opp@608000000,900 {
+		opp-608000000-900 {
 			opp-microvolt = <900000 900000 1125000>;
 		};
 
-		opp@760000000,775 {
+		opp-760000000-775 {
 			opp-microvolt = <775000 775000 1125000>;
 		};
 
-		opp@760000000,800 {
+		opp-760000000-800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@760000000,850 {
+		opp-760000000-850 {
 			opp-microvolt = <850000 850000 1125000>;
 		};
 
-		opp@760000000,875 {
+		opp-760000000-875 {
 			opp-microvolt = <875000 875000 1125000>;
 		};
 
-		opp@760000000,900 {
+		opp-760000000-900 {
 			opp-microvolt = <900000 900000 1125000>;
 		};
 
-		opp@760000000,975 {
+		opp-760000000-975 {
 			opp-microvolt = <975000 975000 1125000>;
 		};
 
-		opp@816000000,800 {
+		opp-816000000-800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@816000000,850 {
+		opp-816000000-850 {
 			opp-microvolt = <850000 850000 1125000>;
 		};
 
-		opp@816000000,875 {
+		opp-816000000-875 {
 			opp-microvolt = <875000 875000 1125000>;
 		};
 
-		opp@816000000,950 {
+		opp-816000000-950 {
 			opp-microvolt = <950000 950000 1125000>;
 		};
 
-		opp@816000000,1000 {
+		opp-816000000-1000 {
 			opp-microvolt = <1000000 1000000 1125000>;
 		};
 
-		opp@912000000,850 {
+		opp-912000000-850 {
 			opp-microvolt = <850000 850000 1125000>;
 		};
 
-		opp@912000000,900 {
+		opp-912000000-900 {
 			opp-microvolt = <900000 900000 1125000>;
 		};
 
-		opp@912000000,925 {
+		opp-912000000-925 {
 			opp-microvolt = <925000 925000 1125000>;
 		};
 
-		opp@912000000,950 {
+		opp-912000000-950 {
 			opp-microvolt = <950000 950000 1125000>;
 		};
 
-		opp@912000000,1000 {
+		opp-912000000-1000 {
 			opp-microvolt = <1000000 1000000 1125000>;
 		};
 
-		opp@912000000,1050 {
+		opp-912000000-1050 {
 			opp-microvolt = <1050000 1050000 1125000>;
 		};
 
-		opp@1000000000,875 {
+		opp-1000000000-875 {
 			opp-microvolt = <875000 875000 1125000>;
 		};
 
-		opp@1000000000,900 {
+		opp-1000000000-900 {
 			opp-microvolt = <900000 900000 1125000>;
 		};
 
-		opp@1000000000,950 {
+		opp-1000000000-950 {
 			opp-microvolt = <950000 950000 1125000>;
 		};
 
-		opp@1000000000,975 {
+		opp-1000000000-975 {
 			opp-microvolt = <975000 975000 1125000>;
 		};
 
-		opp@1000000000,1000 {
+		opp-1000000000-1000 {
 			opp-microvolt = <1000000 1000000 1125000>;
 		};
 
-		opp@1000000000,1025 {
+		opp-1000000000-1025 {
 			opp-microvolt = <1025000 1025000 1125000>;
 		};
 
-		opp@1000000000,1100 {
+		opp-1000000000-1100 {
 			opp-microvolt = <1100000 1100000 1125000>;
 		};
 
-		opp@1200000000,1000 {
+		opp-1200000000-1000 {
 			opp-microvolt = <1000000 1000000 1125000>;
 		};
 
-		opp@1200000000,1050 {
+		opp-1200000000-1050 {
 			opp-microvolt = <1050000 1050000 1125000>;
 		};
 
-		opp@1200000000,1100 {
+		opp-1200000000-1100 {
 			opp-microvolt = <1100000 1100000 1125000>;
 		};
 
-		opp@1200000000,1125 {
+		opp-1200000000-1125 {
 			opp-microvolt = <1125000 1125000 1125000>;
 		};
 	};
diff --git a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi
index 702a635e88e7..47c8e78ca958 100644
--- a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi
+++ b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi
@@ -1,248 +1,250 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	cpu0_opp_table: cpu_opp_table0 {
+	cpu0_opp_table: opp-table-cpu0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@216000000,750 {
+		opp-216000000-750 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0F 0x0003>;
 			opp-hz = /bits/ 64 <216000000>;
+			opp-suspend;
 		};
 
-		opp@216000000,800 {
+		opp-216000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0F 0x0004>;
 			opp-hz = /bits/ 64 <216000000>;
+			opp-suspend;
 		};
 
-		opp@312000000,750 {
+		opp-312000000-750 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0F 0x0003>;
 			opp-hz = /bits/ 64 <312000000>;
 		};
 
-		opp@312000000,800 {
+		opp-312000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0F 0x0004>;
 			opp-hz = /bits/ 64 <312000000>;
 		};
 
-		opp@456000000,750 {
+		opp-456000000-750 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0C 0x0003>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@456000000,800 {
+		opp-456000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0006>, <0x04 0x0004>,
 					   <0x08 0x0004>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@456000000,825 {
+		opp-456000000-825 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@608000000,750 {
+		opp-608000000-750 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0003>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000,800 {
+		opp-608000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0006>, <0x08 0x0004>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000,825 {
+		opp-608000000-825 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0001>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000,850 {
+		opp-608000000-850 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0006>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000,900 {
+		opp-608000000-900 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@760000000,775 {
+		opp-760000000-775 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0003>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,800 {
+		opp-760000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0004>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,850 {
+		opp-760000000-850 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0006>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,875 {
+		opp-760000000-875 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0001>, <0x02 0x0002>,
 					   <0x01 0x0004>, <0x02 0x0004>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,900 {
+		opp-760000000-900 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0002>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,975 {
+		opp-760000000-975 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@816000000,800 {
+		opp-816000000-800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0007>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000,850 {
+		opp-816000000-850 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000,875 {
+		opp-816000000-875 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0005>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000,950 {
+		opp-816000000-950 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0006>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000,1000 {
+		opp-816000000-1000 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@912000000,850 {
+		opp-912000000-850 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0007>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000,900 {
+		opp-912000000-900 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000,925 {
+		opp-912000000-925 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0001>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000,950 {
+		opp-912000000-950 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x02 0x0006>, <0x01 0x0004>,
 					   <0x04 0x0004>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000,1000 {
+		opp-912000000-1000 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0002>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000,1050 {
+		opp-912000000-1050 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@1000000000,875 {
+		opp-1000000000-875 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0007>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,900 {
+		opp-1000000000-900 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,950 {
+		opp-1000000000-950 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0004>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,975 {
+		opp-1000000000-975 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0001>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,1000 {
+		opp-1000000000-1000 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x02 0x0006>, <0x01 0x0004>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,1025 {
+		opp-1000000000-1025 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0002>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,1100 {
+		opp-1000000000-1100 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1200000000,1000 {
+		opp-1200000000-1000 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1050 {
+		opp-1200000000-1050 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1100 {
+		opp-1200000000-1100 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x02 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1125 {
+		opp-1200000000-1125 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 86494cb4d5a1..11f21aeba8e9 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -339,7 +339,7 @@
 					regulator-always-on;
 				};
 
-				sm0 {
+				vdd_core: sm0 {
 					regulator-name = "vdd_sm0,vdd_core";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
@@ -565,6 +565,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <3875>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	pcie@80003000 {
@@ -595,8 +596,6 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
 	};
 
 	usb-phy@c5004000 {
@@ -640,7 +639,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -649,7 +648,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -666,7 +665,7 @@
 		backlight = <&backlight>;
 	};
 
-	vdd_5v0_reg: regulator@0 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -674,7 +673,7 @@
 		regulator-always-on;
 	};
 
-	regulator@1 {
+	regulator-1v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v5";
 		regulator-min-microvolt = <1500000>;
@@ -682,7 +681,7 @@
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	regulator@2 {
+	regulator-1v2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v2";
 		regulator-min-microvolt = <1200000>;
@@ -691,7 +690,7 @@
 		enable-active-high;
 	};
 
-	pci_vdd_reg: regulator@3 {
+	pci_vdd_reg: regulator-1v05 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v05";
 		regulator-min-microvolt = <1050000>;
@@ -700,7 +699,7 @@
 		enable-active-high;
 	};
 
-	vdd_pnl_reg: regulator@4 {
+	vdd_pnl_reg: regulator-pn1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_pnl";
 		regulator-min-microvolt = <2800000>;
@@ -709,7 +708,7 @@
 		enable-active-high;
 	};
 
-	vdd_bl_reg: regulator@5 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <2800000>;
@@ -718,7 +717,7 @@
 		enable-active-high;
 	};
 
-	vdd_5v0_hdmi: regulator@6 {
+	vdd_5v0_hdmi: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_HDMI";
 		regulator-min-microvolt = <5000000>;
@@ -748,7 +747,7 @@
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
+			GPIO_ACTIVE_LOW>;
 		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
 			GPIO_ACTIVE_HIGH>;
 		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
index a348ca30e522..8c657182fff3 100644
--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -15,10 +15,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	pwm@7000a000 {
-		status = "okay";
-	};
-
 	host1x@50000000 {
 		dc@54200000 {
 			rgb {
@@ -28,6 +24,10 @@
 		};
 	};
 
+	pwm@7000a000 {
+		status = "okay";
+	};
+
 	i2c@7000c000 {
 		wm8903: wm8903@1a {
 			compatible = "wlf,wm8903";
@@ -54,6 +54,9 @@
 
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
+
+		/* close enough */
+		power-supply = <&vdd_3v3_reg>;
 	};
 
 	panel: panel {
@@ -84,7 +87,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
@@ -92,7 +95,7 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	vcc_24v_reg: regulator@100 {
+	vcc_24v_reg: regulator-24v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_24v";
 		regulator-min-microvolt = <24000000>;
@@ -100,7 +103,7 @@
 		regulator-always-on;
 	};
 
-	vdd_5v0_reg: regulator@101 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		vin-supply = <&vcc_24v_reg>;
@@ -109,7 +112,7 @@
 		regulator-always-on;
 	};
 
-	vdd_3v3_reg: regulator@102 {
+	vdd_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		vin-supply = <&vcc_24v_reg>;
@@ -118,7 +121,7 @@
 		regulator-always-on;
 	};
 
-	vdd_1v8_reg: regulator@103 {
+	vdd_1v8_reg: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8";
 		vin-supply = <&vdd_3v3_reg>;
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 7e49112cd9a1..e995f428dc2e 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
 #include "tegra20.dtsi"
 #include "tegra20-cpu-opp.dtsi"
 #include "tegra20-cpu-opp-microvolt.dtsi"
@@ -11,6 +13,8 @@
 	compatible = "compal,paz00", "nvidia,tegra20";
 
 	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* MicroSD */
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
@@ -262,8 +266,16 @@
 		};
 	};
 
+	spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
 	i2s@70002800 {
 		status = "okay";
+
+		nvidia,fixed-parent-rate;
 	};
 
 	serial@70006000 {
@@ -311,52 +323,6 @@
 		reset-names = "i2c";
 	};
 
-	memory-controller@7000f400 {
-		nvidia,use-ram-code;
-
-		emc-tables@0 {
-			nvidia,ram-code = <0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			emc-table@166500 {
-				reg = <166500>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <166500>;
-				nvidia,emc-registers = <0x0000000a 0x00000016
-					0x00000008 0x00000003 0x00000004 0x00000004
-					0x00000002 0x0000000c 0x00000003 0x00000003
-					0x00000002 0x00000001 0x00000004 0x00000005
-					0x00000004 0x00000009 0x0000000d 0x000004df
-					0x00000000 0x00000003 0x00000003 0x00000003
-					0x00000003 0x00000001 0x0000000a 0x000000c8
-					0x00000003 0x00000006 0x00000004 0x00000008
-					0x00000002 0x00000000 0x00000000 0x00000002
-					0x00000000 0x00000000 0x00000083 0xe03b0323
-					0x007fe010 0x00001414 0x00000000 0x00000000
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-
-			emc-table@333000 {
-				reg = <333000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <333000>;
-				nvidia,emc-registers = <0x00000018 0x00000033
-					0x00000012 0x00000004 0x00000004 0x00000005
-					0x00000003 0x0000000c 0x00000006 0x00000006
-					0x00000003 0x00000001 0x00000004 0x00000005
-					0x00000004 0x00000009 0x0000000d 0x00000bff
-					0x00000000 0x00000003 0x00000003 0x00000006
-					0x00000006 0x00000001 0x00000011 0x000000c8
-					0x00000003 0x0000000e 0x00000007 0x00000008
-					0x00000002 0x00000000 0x00000000 0x00000002
-					0x00000000 0x00000000 0x00000083 0xf0440303
-					0x007fe010 0x00001414 0x00000000 0x00000000
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-		};
-	};
-
 	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
@@ -387,10 +353,10 @@
 
 				core_vdd_reg: sm0 {
 					regulator-name = "+1.2vs_sm0,vdd_core";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1225000>;
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
 					regulator-coupled-with = <&rtc_vdd_reg &cpu_vdd_reg>;
-					regulator-coupled-max-spread = <170000 450000>;
+					regulator-coupled-max-spread = <170000 550000>;
 					regulator-always-on;
 
 					nvidia,tegra-core-regulator;
@@ -401,7 +367,7 @@
 					regulator-min-microvolt = <750000>;
 					regulator-max-microvolt = <1100000>;
 					regulator-coupled-with = <&core_vdd_reg &rtc_vdd_reg>;
-					regulator-coupled-max-spread = <450000 450000>;
+					regulator-coupled-max-spread = <550000 550000>;
 					regulator-always-on;
 
 					nvidia,tegra-cpu-regulator;
@@ -425,10 +391,10 @@
 
 				rtc_vdd_reg: ldo2 {
 					regulator-name = "+1.2vs_ldo2,vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1225000>;
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
 					regulator-coupled-with = <&core_vdd_reg &cpu_vdd_reg>;
-					regulator-coupled-max-spread = <170000 450000>;
+					regulator-coupled-max-spread = <170000 550000>;
 					regulator-always-on;
 
 					nvidia,tegra-rtc-regulator;
@@ -497,9 +463,14 @@
 			};
 		};
 
-		adt7461@4c {
+		adt7461: temperature-sensor@4c {
 			compatible = "adi,adt7461";
 			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
 		};
 	};
 
@@ -511,6 +482,54 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&core_vdd_reg>;
+	};
+
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@0 {
+			nvidia,ram-code = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			emc-table@166500 {
+				reg = <166500>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <166500>;
+				nvidia,emc-registers = <0x0000000a 0x00000016
+					0x00000008 0x00000003 0x00000004 0x00000004
+					0x00000002 0x0000000c 0x00000003 0x00000003
+					0x00000002 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x000004df
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000003 0x00000001 0x0000000a 0x000000c8
+					0x00000003 0x00000006 0x00000004 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xe03b0323
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@333000 {
+				reg = <333000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <333000>;
+				nvidia,emc-registers = <0x00000018 0x00000033
+					0x00000012 0x00000004 0x00000004 0x00000005
+					0x00000003 0x0000000c 0x00000006 0x00000006
+					0x00000003 0x00000001 0x00000004 0x00000005
+					0x00000004 0x00000009 0x0000000d 0x00000bff
+					0x00000000 0x00000003 0x00000003 0x00000006
+					0x00000006 0x00000001 0x00000011 0x000000c8
+					0x00000003 0x0000000e 0x00000007 0x00000008
+					0x00000002 0x00000000 0x00000000 0x00000002
+					0x00000000 0x00000000 0x00000083 0xf0440303
+					0x007fe010 0x00001414 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
 	};
 
 	usb@c5000000 {
@@ -525,8 +544,6 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_LOW>;
 	};
 
 	usb-phy@c5004000 {
@@ -543,7 +560,7 @@
 		status = "okay";
 	};
 
-	mmc@c8000000 {
+	sdmmc1: mmc@c8000000 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
@@ -551,7 +568,7 @@
 		bus-width = <4>;
 	};
 
-	mmc@c8000600 {
+	sdmmc4: mmc@c8000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -566,19 +583,34 @@
 		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
 		default-brightness-level = <10>;
 
-		backlight-boot-off;
+		/* close enough */
+		power-supply = <&vdd_pnl_reg>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
 	};
 
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&cpu_vdd_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&cpu_vdd_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "Wakeup";
 			gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -596,6 +628,10 @@
 		};
 	};
 
+	opp-table-emc {
+		/delete-node/ opp-760000000;
+	};
+
 	panel: panel {
 		compatible = "samsung,ltn101nt05";
 
@@ -606,7 +642,7 @@
 		backlight = <&backlight>;
 	};
 
-	p5valw_reg: regulator@0 {
+	p5valw_reg: regulator-5v0alw {
 		compatible = "regulator-fixed";
 		regulator-name = "+5valw";
 		regulator-min-microvolt = <5000000>;
@@ -614,7 +650,7 @@
 		regulator-always-on;
 	};
 
-	vdd_pnl_reg: regulator@1 {
+	vdd_pnl_reg: regulator-3v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+3VS,vdd_pnl";
 		regulator-min-microvolt = <3300000>;
@@ -650,19 +686,36 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	cpus {
-		cpu0: cpu@0 {
-			cpu-supply = <&cpu_vdd_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <500>; /* milliseconds */
+			polling-delay = <1500>; /* milliseconds */
 
-		cpu@1 {
-			cpu-supply = <&cpu_vdd_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
+			thermal-sensors = <&adt7461 1>;
+
+			trips {
+				trip0: cpu-alert0 {
+					/* start throttling at 80C */
+					temperature = <80000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: cpu-crit {
+					/* shut down at 85C */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 };
-
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@760000000;
-};
diff --git a/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi
index b84afecea154..1b808233a933 100644
--- a/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi
+++ b/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi
@@ -1,109 +1,1022 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	emc_icc_dvfs_opp_table: emc-dvfs-opp-table {
+	core_opp_table: opp-table-core {
 		compatible = "operating-points-v2";
+		opp-shared;
 
-		opp@36000000 {
+		core_opp_950: opp-950000 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-level = <950000>;
+		};
+
+		core_opp_1000: opp-1000000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-level = <1000000>;
+		};
+
+		core_opp_1100: opp-1100000 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-level = <1100000>;
+		};
+
+		core_opp_1200: opp-1200000 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-level = <1200000>;
+		};
+
+		core_opp_1225: opp-1225000 {
+			opp-microvolt = <1225000 1225000 1300000>;
+			opp-level = <1225000>;
+		};
+
+		core_opp_1275: opp-1275000 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-level = <1275000>;
+		};
+
+		core_opp_1300: opp-1300000 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-level = <1300000>;
+		};
+	};
+
+	emc_icc_dvfs_opp_table: opp-table-emc {
+		compatible = "operating-points-v2";
+
+		opp-36000000 {
 			opp-microvolt = <950000 950000 1300000>;
 			opp-hz = /bits/ 64 <36000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@47500000 {
+		opp-47500000 {
 			opp-microvolt = <950000 950000 1300000>;
 			opp-hz = /bits/ 64 <47500000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@50000000 {
+		opp-50000000 {
 			opp-microvolt = <950000 950000 1300000>;
 			opp-hz = /bits/ 64 <50000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@54000000 {
+		opp-54000000 {
 			opp-microvolt = <950000 950000 1300000>;
 			opp-hz = /bits/ 64 <54000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@57000000 {
+		opp-57000000 {
 			opp-microvolt = <950000 950000 1300000>;
 			opp-hz = /bits/ 64 <57000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@100000000 {
+		opp-100000000 {
 			opp-microvolt = <1000000 1000000 1300000>;
 			opp-hz = /bits/ 64 <100000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@108000000 {
+		opp-108000000 {
 			opp-microvolt = <1000000 1000000 1300000>;
 			opp-hz = /bits/ 64 <108000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@126666000 {
+		opp-126666000 {
 			opp-microvolt = <1000000 1000000 1300000>;
 			opp-hz = /bits/ 64 <126666000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@150000000 {
+		opp-150000000 {
 			opp-microvolt = <1000000 1000000 1300000>;
 			opp-hz = /bits/ 64 <150000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@190000000 {
+		opp-190000000 {
 			opp-microvolt = <1000000 1000000 1300000>;
 			opp-hz = /bits/ 64 <190000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@216000000 {
+		opp-216000000 {
 			opp-microvolt = <1000000 1000000 1300000>;
 			opp-hz = /bits/ 64 <216000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+			opp-suspend;
 		};
 
-		opp@300000000 {
+		opp-300000000 {
 			opp-microvolt = <1000000 1000000 1300000>;
 			opp-hz = /bits/ 64 <300000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@333000000 {
+		opp-333000000 {
 			opp-microvolt = <1000000 1000000 1300000>;
 			opp-hz = /bits/ 64 <333000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@380000000 {
+		opp-380000000 {
 			opp-microvolt = <1100000 1100000 1300000>;
 			opp-hz = /bits/ 64 <380000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
 		};
 
-		opp@600000000 {
+		opp-600000000 {
 			opp-microvolt = <1200000 1200000 1300000>;
 			opp-hz = /bits/ 64 <600000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@666000000 {
+		opp-666000000 {
 			opp-microvolt = <1200000 1200000 1300000>;
 			opp-hz = /bits/ 64 <666000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@760000000 {
+		opp-760000000 {
 			opp-microvolt = <1300000 1300000 1300000>;
 			opp-hz = /bits/ 64 <760000000>;
 			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1300>;
+		};
+	};
+
+	host1x_dvfs_opp_table: opp-table-host1x {
+		compatible = "operating-points-v2";
+
+		opp-104500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <104500000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-133000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-166000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <166000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	mpe_dvfs_opp_table: opp-table-mpe {
+		compatible = "operating-points-v2";
+
+		opp-104500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <104500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-142500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <142500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-152000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-228000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <228000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-228000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <228000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-237500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <237500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-266000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <266000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-275500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <275500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-300000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-300000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	vi_dvfs_opp_table: opp-table-vi {
+		compatible = "operating-points-v2";
+
+		opp-85000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <85000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-100000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-150000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <150000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	epp_dvfs_opp_table: opp-table-epp {
+		compatible = "operating-points-v2";
+
+		opp-133000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-171000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <171000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-247000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-300000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	gr2d_dvfs_opp_table: opp-table-gr2d {
+		compatible = "operating-points-v2";
+
+		opp-133000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-171000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <171000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-247000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-300000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	gr3d_dvfs_opp_table: opp-table-gr3d {
+		compatible = "operating-points-v2";
+
+		opp-114000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <114000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-161500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <161500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-161500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <161500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-209000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <209000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-218500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <218500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-247000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-247000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-256500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <256500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-285000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-285000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-304000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-323000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <323000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-333500000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <333500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-333500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <333500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-351500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <351500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-361000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-380000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-400000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-400000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	disp1_dvfs_opp_table: opp-table-disp1 {
+		compatible = "operating-points-v2";
+
+		opp-158000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <158000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-190000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	disp2_dvfs_opp_table: opp-table-disp2 {
+		compatible = "operating-points-v2";
+
+		opp-158000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <158000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-190000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	dsi_dvfs_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-100000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-500000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <500000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	hdmi_dvfs_opp_table: opp-table-hdmi {
+		compatible = "operating-points-v2";
+
+		opp-148500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <148500000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	tvo_dvfs_opp_table: opp-table-tvo {
+		compatible = "operating-points-v2";
+
+		opp-250000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <250000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sclk_dvfs_opp_table: opp-table-sclk {
+		compatible = "operating-points-v2";
+
+		opp-95000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <95000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-123500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <123500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-133000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-152000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-159500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <159500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-171000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <171000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-180500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <180500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-207000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <207000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-218500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <218500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-222500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <222500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-229500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <229500000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-240000000-1225 {
+			opp-microvolt = <1225000 1225000 1300000>;
+			opp-hz = /bits/ 64 <240000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1225>;
+		};
+
+		opp-240000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <240000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-247000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-256500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <256500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-260000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <260000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-262000000-1300 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-hz = /bits/ 64 <262000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-264000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-277500000-1300 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-hz = /bits/ 64 <277500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-285000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-292500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <292500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-300000000-1300 {
+			opp-microvolt = <1300000 1300000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-300000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1275>;
+		};
+	};
+
+	vde_dvfs_opp_table: opp-table-vde {
+		compatible = "operating-points-v2";
+
+		opp-95000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <95000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-123500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <123500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-123500000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <123500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-152000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-152000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-171000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <171000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-209000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <209000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-209000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <209000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-218500000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <218500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-237500000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <237500000>;
+			opp-supported-hw = <0x0002>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-275500000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <275500000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-285000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-300000000-1275 {
+			opp-microvolt = <1275000 1275000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1275>;
+		};
+
+		opp-300000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-300000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	ndflash_dvfs_opp_table: opp-table-ndflash {
+		compatible = "operating-points-v2";
+
+		opp-130000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <130000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-150000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <150000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-158000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <158000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-164000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <164000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	nor_dvfs_opp_table: opp-table-nor {
+		compatible = "operating-points-v2";
+
+		opp-92000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <92000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sdmmc1_dvfs_opp_table: opp-table-sdmmc1 {
+		compatible = "operating-points-v2";
+
+		opp-44000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <44000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sdmmc2_dvfs_opp_table: opp-table-sdmmc2 {
+		compatible = "operating-points-v2";
+
+		opp-44000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <44000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sdmmc3_dvfs_opp_table: opp-table-sdmmc3 {
+		compatible = "operating-points-v2";
+
+		opp-44000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <44000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sdmmc4_dvfs_opp_table: opp-table-sdmmc4 {
+		compatible = "operating-points-v2";
+
+		opp-44000000-950 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <44000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1300000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	pcie_dvfs_opp_table: opp-table-pcie {
+		compatible = "operating-points-v2";
+
+		opp-250000000-1200 {
+			opp-microvolt = <1200000 1200000 1300000>;
+			opp-hz = /bits/ 64 <250000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	usbd_dvfs_opp_table: opp-table-usbd {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	usb2_dvfs_opp_table: opp-table-usb2 {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+	};
+
+	usb3_dvfs_opp_table: opp-table-usb3 {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1100 {
+			opp-microvolt = <1100000 1100000 1300000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts
index 378f23b2958b..71a8236491df 100644
--- a/arch/arm/boot/dts/tegra20-plutux.dts
+++ b/arch/arm/boot/dts/tegra20-plutux.dts
@@ -52,7 +52,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
@@ -60,7 +60,7 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	vcc_24v_reg: regulator@100 {
+	vcc_24v_reg: regulator-24v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_24v";
 		regulator-min-microvolt = <24000000>;
@@ -68,7 +68,7 @@
 		regulator-always-on;
 	};
 
-	vdd_5v0_reg: regulator@101 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		vin-supply = <&vcc_24v_reg>;
@@ -77,7 +77,7 @@
 		regulator-always-on;
 	};
 
-	vdd_3v3_reg: regulator@102 {
+	vdd_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		vin-supply = <&vcc_24v_reg>;
@@ -86,7 +86,7 @@
 		regulator-always-on;
 	};
 
-	vdd_1v8_reg: regulator@103 {
+	vdd_1v8_reg: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8";
 		vin-supply = <&vdd_3v3_reg>;
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index c24d4a37613e..bd4ff8b40b20 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -285,7 +285,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -296,25 +296,25 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
+				nvidia,function = "rsvd4";
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
+				nvidia,function = "i2c2";
 			};
 		};
 	};
@@ -358,7 +358,7 @@
 		};
 
 		gyrometer@68 {
-			compatible = "invn,mpu3050";
+			compatible = "invensense,mpu3050";
 			reg = <0x68>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_LEVEL_HIGH>;
@@ -370,38 +370,6 @@
 		clock-frequency = <100000>;
 	};
 
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		lvds_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			smart-battery@b {
-				compatible = "ti,bq20z75", "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,i2c-retry-count = <2>;
-				sbs,poll-retry-count = <10>;
-			};
-		};
-	};
-
 	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <400000>;
@@ -444,7 +412,7 @@
 					regulator-always-on;
 				};
 
-				sm0 {
+				vdd_core: sm0 {
 					regulator-name = "vdd_sm0,vdd_core";
 					regulator-min-microvolt = <1300000>;
 					regulator-max-microvolt = <1300000>;
@@ -689,6 +657,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <3875>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	memory-controller@7000f400 {
@@ -742,8 +711,6 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
 	};
 
 	usb-phy@c5004000 {
@@ -792,7 +759,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -801,14 +768,14 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		lid {
+		switch-lid {
 			label = "Lid";
 			gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
 			linux,input-type = <5>; /* EV_SW */
@@ -818,6 +785,38 @@
 		};
 	};
 
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smart-battery@b {
+				compatible = "ti,bq20z75", "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <10>;
+			};
+		};
+	};
+
 	panel: panel {
 		compatible = "chunghwa,claa101wa01a";
 
@@ -828,7 +827,7 @@
 		ddc-i2c-bus = <&lvds_ddc>;
 	};
 
-	vdd_5v0_reg: regulator@0 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -836,7 +835,7 @@
 		regulator-always-on;
 	};
 
-	regulator@1 {
+	regulator-1v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v5";
 		regulator-min-microvolt = <1500000>;
@@ -844,7 +843,7 @@
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	regulator@2 {
+	regulator-1v2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v2";
 		regulator-min-microvolt = <1200000>;
@@ -853,7 +852,7 @@
 		enable-active-high;
 	};
 
-	vbus_reg: regulator@3 {
+	vbus_reg: regulator-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_vbus_wup1";
 		regulator-min-microvolt = <5000000>;
@@ -864,7 +863,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_pnl_reg: regulator@4 {
+	vdd_pnl_reg: regulator-pnl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_pnl";
 		regulator-min-microvolt = <2800000>;
@@ -873,7 +872,7 @@
 		enable-active-high;
 	};
 
-	vdd_bl_reg: regulator@5 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <2800000>;
@@ -882,7 +881,7 @@
 		enable-active-high;
 	};
 
-	vdd_hdmi: regulator@6 {
+	vdd_hdmi: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_HDMI";
 		regulator-min-microvolt = <5000000>;
@@ -911,7 +910,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 95e6bccdb4f6..ddb84e4a9f8b 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -183,10 +183,11 @@
 			};
 			conf_ata {
 				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
-					"cdev1", "cdev2", "dap1", "dtb", "gma",
-					"gmb", "gmc", "gmd", "gme", "gpu7",
-					"gpv", "i2cp", "pta", "rm", "slxa",
-					"slxk", "spia", "spib", "uac";
+					"cdev1", "cdev2", "dap1", "dtb", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme", "gpu7",
+					"gpv", "i2cp", "irrx", "irtx", "pta",
+					"rm", "slxa", "slxk", "spia", "spib",
+					"uac";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -202,7 +203,7 @@
 			};
 			conf_crtp {
 				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
-					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"dtc", "dte", "gpu", "sdio1",
 					"slxc", "slxd", "spdi", "spdo", "spig",
 					"uda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -211,7 +212,7 @@
 			conf_ddc {
 				nvidia,pins = "ddc", "dta", "dtd", "kbca",
 					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
-					"sdc";
+					"sdc", "uad", "uca";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -221,10 +222,9 @@
 					"lvp0", "owc", "sdb";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			conf_irrx {
-				nvidia,pins = "irrx", "irtx", "sdd", "spic",
-					"spie", "spih", "uaa", "uab", "uad",
-					"uca", "ucb";
+			conf_sdd {
+				nvidia,pins = "sdd", "spic", "spie", "spih",
+					"uaa", "uab", "ucb";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
@@ -249,7 +249,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -260,25 +260,25 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
+				nvidia,function = "rsvd4";
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
+				nvidia,function = "i2c2";
 			};
 		};
 	};
@@ -301,31 +301,6 @@
 		status = "okay";
 	};
 
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
 	i2c@7000d000 {
 		clock-frequency = <400000>;
 		status = "okay";
@@ -357,7 +332,7 @@
 					regulator-always-on;
 				};
 
-				sm0 {
+				vdd_core: sm0 {
 					regulator-name = "vdd_sys_sm0,vdd_core";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
@@ -477,6 +452,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <3875>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	pcie@80003000 {
@@ -502,13 +478,38 @@
 		status = "okay";
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
 	};
 
-	pci_vdd_reg: regulator@1 {
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	pci_vdd_reg: regulator-1v05 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v05";
 		regulator-min-microvolt = <1050000>;
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
index 44ced60315de..4f41c74384b2 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -61,7 +61,7 @@
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
+			GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
@@ -69,7 +69,7 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	vcc_24v_reg: regulator@100 {
+	vcc_24v_reg: regulator-24v {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_24v";
 		regulator-min-microvolt = <24000000>;
@@ -77,7 +77,7 @@
 		regulator-always-on;
 	};
 
-	vdd_5v0_reg: regulator@101 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		vin-supply = <&vcc_24v_reg>;
@@ -86,7 +86,7 @@
 		regulator-always-on;
 	};
 
-	vdd_3v3_reg: regulator@102 {
+	vdd_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		vin-supply = <&vcc_24v_reg>;
@@ -95,7 +95,7 @@
 		regulator-always-on;
 	};
 
-	vdd_1v8_reg: regulator@103 {
+	vdd_1v8_reg: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v8";
 		vin-supply = <&vdd_3v3_reg>;
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 4bc87bc0c2a4..1944121e2dd6 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -287,7 +287,8 @@
 	spi@7000c380 {
 		status = "okay";
 		spi-max-frequency = <48000000>;
-		spi-flash@0 {
+
+		flash@0 {
 			compatible = "winbond,w25q80bl", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <48000000>;
@@ -321,6 +322,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <3875>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	pcie@80003000 {
@@ -348,8 +350,6 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
-			GPIO_ACTIVE_LOW>;
 	};
 
 	usb-phy@c5004000 {
@@ -379,16 +379,26 @@
 		bus-width = <4>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
 	};
 
+	cpus {
+		cpu0: cpu@0 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -401,7 +411,7 @@
 		gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
 	};
 
-	hdmi_vdd_reg: regulator@0 {
+	hdmi_vdd_reg: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd_hdmi";
 		regulator-min-microvolt = <3300000>;
@@ -409,7 +419,7 @@
 		regulator-always-on;
 	};
 
-	hdmi_pll_reg: regulator@1 {
+	hdmi_pll_reg: regulator-hdmipll {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd_hdmi_pll";
 		regulator-min-microvolt = <1800000>;
@@ -417,7 +427,7 @@
 		regulator-always-on;
 	};
 
-	vbus_reg: regulator@2 {
+	vbus_reg: regulator-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -428,7 +438,7 @@
 		regulator-boot-on;
 	};
 
-	pci_clk_reg: regulator@3 {
+	pci_clk_reg: regulator-pciclk {
 		compatible = "regulator-fixed";
 		regulator-name = "pci_clk";
 		regulator-min-microvolt = <3300000>;
@@ -436,7 +446,7 @@
 		regulator-always-on;
 	};
 
-	pci_vdd_reg: regulator@4 {
+	pci_vdd_reg: regulator-pcivdd {
 		compatible = "regulator-fixed";
 		regulator-name = "pci_vdd";
 		regulator-min-microvolt = <1050000>;
@@ -444,6 +454,14 @@
 		regulator-always-on;
 	};
 
+	vdd_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <1300000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-trimslice";
 		nvidia,i2s-controller = <&tegra_i2s1>;
@@ -454,14 +472,4 @@
 			 <&tegra_car TEGRA20_CLK_CDEV1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
-
-	cpus {
-		cpu0: cpu@0 {
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@1 {
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 055334ae3d28..433575a6ad38 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -2,8 +2,10 @@
 /dts-v1/;
 
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "tegra20.dtsi"
 #include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
 
 / {
 	model = "NVIDIA Tegra20 Ventana evaluation board";
@@ -282,7 +284,7 @@
 			};
 		};
 
-		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "i2c2";
@@ -293,25 +295,25 @@
 			};
 		};
 
-		state_i2cmux_pta: pinmux_i2cmux_pta {
+		state_i2cmux_idle: pinmux-i2cmux-idle {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
+				nvidia,function = "rsvd4";
 			};
 		};
 
-		state_i2cmux_idle: pinmux_i2cmux_idle {
+		state_i2cmux_pta: pinmux-i2cmux-pta {
 			ddc {
 				nvidia,pins = "ddc";
 				nvidia,function = "rsvd4";
 			};
 			pta {
 				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
+				nvidia,function = "i2c2";
 			};
 		};
 	};
@@ -360,31 +362,6 @@
 		clock-frequency = <100000>;
 	};
 
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@7000c400}>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		lvds_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
 	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <400000>;
@@ -420,18 +397,28 @@
 					regulator-always-on;
 				};
 
-				sm0 {
+				vdd_core: sm0 {
 					regulator-name = "vdd_sm0,vdd_core";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
 					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
 				};
 
-				sm1 {
+				vdd_cpu: sm1 {
 					regulator-name = "vdd_sm1,vdd_cpu";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-coupled-with = <&vdd_core &rtc_vdd>;
+					regulator-coupled-max-spread = <550000 550000>;
 					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
 				};
 
 				sm2_reg: sm2 {
@@ -450,10 +437,16 @@
 					regulator-always-on;
 				};
 
-				ldo2 {
+				rtc_vdd: ldo2 {
 					regulator-name = "vdd_ldo2,vdd_rtc";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&vdd_core &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-rtc-regulator;
 				};
 
 				ldo3 {
@@ -511,9 +504,10 @@
 			};
 		};
 
-		temperature-sensor@4c {
+		nct1008: temperature-sensor@4c {
 			compatible = "onnn,nct1008";
 			reg = <0x4c>;
+			#thermal-sensor-cells = <1>;
 		};
 	};
 
@@ -525,6 +519,7 @@
 		nvidia,core-pwr-good-time = <3845 3845>;
 		nvidia,core-pwr-off-time = <458>;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	usb@c5000000 {
@@ -537,8 +532,6 @@
 
 	usb@c5004000 {
 		status = "okay";
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
-			GPIO_ACTIVE_LOW>;
 	};
 
 	usb-phy@c5004000 {
@@ -587,7 +580,7 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
@@ -595,18 +588,22 @@
 
 	cpus {
 		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -614,6 +611,31 @@
 		};
 	};
 
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	panel: panel {
 		compatible = "chunghwa,claa101wa01a";
 
@@ -624,7 +646,7 @@
 		ddc-i2c-bus = <&lvds_ddc>;
 	};
 
-	vdd_5v0_reg: regulator@0 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -632,7 +654,7 @@
 		regulator-always-on;
 	};
 
-	regulator@1 {
+	regulator-1v5 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v5";
 		regulator-min-microvolt = <1500000>;
@@ -640,7 +662,7 @@
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	regulator@2 {
+	regulator-1v2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_1v2";
 		regulator-min-microvolt = <1200000>;
@@ -649,7 +671,7 @@
 		enable-active-high;
 	};
 
-	vdd_pnl_reg: regulator@3 {
+	vdd_pnl_reg: regulator-pnl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_pnl";
 		regulator-min-microvolt = <2800000>;
@@ -658,7 +680,7 @@
 		enable-active-high;
 	};
 
-	vdd_bl_reg: regulator@4 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <2800000>;
@@ -686,7 +708,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
 			GPIO_ACTIVE_HIGH>;
 		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
@@ -697,4 +719,37 @@
 			 <&tegra_car TEGRA20_CLK_CDEV1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip0: cpu-alert0 {
+					/* start throttling at 50C */
+					temperature = <50000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: cpu-crit {
+					/* shut down at 60C */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 6ce498178105..4177d04265d8 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -40,8 +40,10 @@
 		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
 		clock-names = "host1x";
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA20_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&host1x_dvfs_opp_table>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -55,6 +57,9 @@
 			clocks = <&tegra_car TEGRA20_CLK_MPE>;
 			resets = <&tegra_car 60>;
 			reset-names = "mpe";
+			power-domains = <&pd_mpe>;
+			operating-points-v2 = <&mpe_dvfs_opp_table>;
+			status = "disabled";
 		};
 
 		vi@54080000 {
@@ -64,6 +69,9 @@
 			clocks = <&tegra_car TEGRA20_CLK_VI>;
 			resets = <&tegra_car 20>;
 			reset-names = "vi";
+			power-domains = <&pd_venc>;
+			operating-points-v2 = <&vi_dvfs_opp_table>;
+			status = "disabled";
 		};
 
 		epp@540c0000 {
@@ -73,6 +81,9 @@
 			clocks = <&tegra_car TEGRA20_CLK_EPP>;
 			resets = <&tegra_car 19>;
 			reset-names = "epp";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&epp_dvfs_opp_table>;
+			status = "disabled";
 		};
 
 		isp@54100000 {
@@ -82,6 +93,8 @@
 			clocks = <&tegra_car TEGRA20_CLK_ISP>;
 			resets = <&tegra_car 23>;
 			reset-names = "isp";
+			power-domains = <&pd_venc>;
+			status = "disabled";
 		};
 
 		gr2d@54140000 {
@@ -89,16 +102,20 @@
 			reg = <0x54140000 0x00040000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
+			resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+			reset-names = "2d", "mc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&gr2d_dvfs_opp_table>;
 		};
 
 		gr3d@54180000 {
 			compatible = "nvidia,tegra20-gr3d";
 			reg = <0x54180000 0x00040000>;
 			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
-			resets = <&tegra_car 24>;
-			reset-names = "3d";
+			resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+			reset-names = "3d", "mc";
+			power-domains = <&pd_3d>;
+			operating-points-v2 = <&gr3d_dvfs_opp_table>;
 		};
 
 		dc@54200000 {
@@ -110,6 +127,8 @@
 			clock-names = "dc", "parent";
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&disp1_dvfs_opp_table>;
 
 			nvidia,head = <0>;
 
@@ -138,6 +157,8 @@
 			clock-names = "dc", "parent";
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&disp2_dvfs_opp_table>;
 
 			nvidia,head = <1>;
 
@@ -157,7 +178,7 @@
 			};
 		};
 
-		hdmi@54280000 {
+		tegra_hdmi: hdmi@54280000 {
 			compatible = "nvidia,tegra20-hdmi";
 			reg = <0x54280000 0x00040000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -166,6 +187,9 @@
 			clock-names = "hdmi", "parent";
 			resets = <&tegra_car 51>;
 			reset-names = "hdmi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&hdmi_dvfs_opp_table>;
+			#sound-dai-cells = <0>;
 			status = "disabled";
 		};
 
@@ -174,6 +198,8 @@
 			reg = <0x542c0000 0x00040000>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA20_CLK_TVO>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&tvo_dvfs_opp_table>;
 			status = "disabled";
 		};
 
@@ -185,6 +211,8 @@
 			clock-names = "dsi", "parent";
 			resets = <&tegra_car 48>;
 			reset-names = "dsi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&dsi_dvfs_opp_table>;
 			status = "disabled";
 		};
 	};
@@ -242,6 +270,13 @@
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
+
+		sclk {
+			compatible = "nvidia,tegra20-sclk";
+			clocks = <&tegra_car TEGRA20_CLK_SCLK>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&sclk_dvfs_opp_table>;
+		};
 	};
 
 	flow-controller@60007000 {
@@ -293,9 +328,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
-		/*
 		gpio-ranges = <&pinmux 0 0 224>;
-		*/
 	};
 
 	vde@6001a000 {
@@ -319,12 +352,8 @@
 		clocks = <&tegra_car TEGRA20_CLK_VDE>;
 		reset-names = "vde", "mc";
 		resets = <&tegra_car 61>, <&mc TEGRA20_MC_RESET_VDE>;
-	};
-
-	apbmisc@70000800 {
-		compatible = "nvidia,tegra20-apbmisc";
-		reg = <0x70000800 0x64>, /* Chip revision */
-		      <0x70000008 0x04>; /* Strapping options */
+		power-domains = <&pd_vde>;
+		operating-points-v2 = <&vde_dvfs_opp_table>;
 	};
 
 	pinmux: pinmux@70000014 {
@@ -335,6 +364,12 @@
 		      <0x70000868 0xa8>; /* Pad control registers */
 	};
 
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64>, /* Chip revision */
+		      <0x70000008 0x04>; /* Strapping options */
+	};
+
 	das@70000c00 {
 		compatible = "nvidia,tegra20-das";
 		reg = <0x70000c00 0x80>;
@@ -352,6 +387,23 @@
 		status = "disabled";
 	};
 
+	tegra_spdif: spdif@70002400 {
+		compatible = "nvidia,tegra20-spdif";
+		reg = <0x70002400 0x200>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SPDIF_OUT>,
+			 <&tegra_car TEGRA20_CLK_SPDIF_IN>;
+		clock-names = "out", "in";
+		resets = <&tegra_car 10>;
+		dmas = <&apbdma 3>, <&apbdma 3>;
+		dma-names = "rx", "tx";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SPDIF_OUT>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_A_OUT0>;
+	};
+
 	tegra_i2s1: i2s@70002800 {
 		compatible = "nvidia,tegra20-i2s";
 		reg = <0x70002800 0x200>;
@@ -460,6 +512,8 @@
 		reset-names = "nand";
 		assigned-clocks = <&tegra_car TEGRA20_CLK_NDFLASH>;
 		assigned-clock-rates = <150000000>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&ndflash_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -473,6 +527,8 @@
 		clock-names = "gmi";
 		resets = <&tegra_car 42>;
 		reset-names = "gmi";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&nor_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -486,13 +542,6 @@
 		status = "disabled";
 	};
 
-	rtc@7000e000 {
-		compatible = "nvidia,tegra20-rtc";
-		reg = <0x7000e000 0x100>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA20_CLK_RTC>;
-	};
-
 	i2c@7000c000 {
 		compatible = "nvidia,tegra20-i2c";
 		reg = <0x7000c000 0x100>;
@@ -523,7 +572,7 @@
 		status = "disabled";
 	};
 
-	i2c@7000c400 {
+	i2c2: i2c@7000c400 {
 		compatible = "nvidia,tegra20-i2c";
 		reg = <0x7000c400 0x100>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -627,6 +676,13 @@
 		status = "disabled";
 	};
 
+	rtc@7000e000 {
+		compatible = "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_RTC>;
+	};
+
 	kbc@7000e200 {
 		compatible = "nvidia,tegra20-kbc";
 		reg = <0x7000e200 0x100>;
@@ -643,6 +699,52 @@
 		clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
 		#clock-cells = <1>;
+
+		pd_core: core-domain {
+			#power-domain-cells = <0>;
+			operating-points-v2 = <&core_opp_table>;
+		};
+
+		powergates {
+			pd_mpe: mpe {
+				clocks = <&tegra_car TEGRA20_CLK_MPE>;
+				resets = <&mc TEGRA20_MC_RESET_MPEA>,
+					 <&mc TEGRA20_MC_RESET_MPEB>,
+					 <&mc TEGRA20_MC_RESET_MPEC>,
+					 <&tegra_car TEGRA20_CLK_MPE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_3d: td {
+				clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+				resets = <&mc TEGRA20_MC_RESET_3D>,
+					 <&tegra_car TEGRA20_CLK_GR3D>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_vde: vdec {
+				clocks = <&tegra_car TEGRA20_CLK_VDE>;
+				resets = <&mc TEGRA20_MC_RESET_VDE>,
+					 <&tegra_car TEGRA20_CLK_VDE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_venc: venc {
+				clocks = <&tegra_car TEGRA20_CLK_ISP>,
+					 <&tegra_car TEGRA20_CLK_VI>,
+					 <&tegra_car TEGRA20_CLK_CSI>;
+				resets = <&mc TEGRA20_MC_RESET_ISP>,
+					 <&mc TEGRA20_MC_RESET_VI>,
+					 <&tegra_car TEGRA20_CLK_ISP>,
+					 <&tegra_car 20 /* VI */>,
+					 <&tegra_car TEGRA20_CLK_CSI>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+		};
 	};
 
 	mc: memory-controller@7000f000 {
@@ -662,12 +764,13 @@
 		reg = <0x7000f400 0x400>;
 		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_EMC>;
+		power-domains = <&pd_core>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		#interconnect-cells = <0>;
 
-		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
 		nvidia,memory-controller = <&mc>;
+		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
 	};
 
 	fuse@7000f800 {
@@ -712,6 +815,9 @@
 			 <&tegra_car 72>,
 			 <&tegra_car 74>;
 		reset-names = "pex", "afi", "pcie_x";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&pcie_dvfs_opp_table>;
+
 		status = "disabled";
 
 		pci@1,0 {
@@ -744,16 +850,17 @@
 	};
 
 	usb@c5000000 {
-		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		compatible = "nvidia,tegra20-ehci";
 		reg = <0xc5000000 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
-		nvidia,has-legacy-mode;
 		clocks = <&tegra_car TEGRA20_CLK_USBD>;
 		resets = <&tegra_car 22>;
 		reset-names = "usb";
 		nvidia,needs-double-reset;
 		nvidia,phy = <&phy1>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usbd_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -761,6 +868,7 @@
 		compatible = "nvidia,tegra20-usb-phy";
 		reg = <0xc5000000 0x4000>,
 		      <0xc5000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA20_CLK_USBD>,
 			 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -779,11 +887,12 @@
 		nvidia,xcvr-lsfslew = <1>;
 		nvidia,xcvr-lsrslew = <1>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
 	usb@c5004000 {
-		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		compatible = "nvidia,tegra20-ehci";
 		reg = <0xc5004000 0x4000>;
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "ulpi";
@@ -791,12 +900,15 @@
 		resets = <&tegra_car 58>;
 		reset-names = "usb";
 		nvidia,phy = <&phy2>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usb2_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	phy2: usb-phy@c5004000 {
 		compatible = "nvidia,tegra20-usb-phy";
 		reg = <0xc5004000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "ulpi";
 		clocks = <&tegra_car TEGRA20_CLK_USB2>,
 			 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -805,11 +917,12 @@
 		resets = <&tegra_car 58>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
 		#phy-cells = <0>;
+		nvidia,pmc = <&tegra_pmc 1>;
 		status = "disabled";
 	};
 
 	usb@c5008000 {
-		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		compatible = "nvidia,tegra20-ehci";
 		reg = <0xc5008000 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -817,6 +930,8 @@
 		resets = <&tegra_car 59>;
 		reset-names = "usb";
 		nvidia,phy = <&phy3>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usb3_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -824,6 +939,7 @@
 		compatible = "nvidia,tegra20-usb-phy";
 		reg = <0xc5008000 0x4000>,
 		      <0xc5000000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA20_CLK_USB3>,
 			 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -840,6 +956,7 @@
 		nvidia,xcvr-setup = <9>;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};
 
@@ -851,6 +968,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc1_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -862,6 +981,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 9>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc2_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -873,6 +994,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc3_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -884,6 +1007,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 15>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc4_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -913,4 +1038,24 @@
 		interrupt-affinity = <&{/cpus/cpu@0}>,
 				     <&{/cpus/cpu@1}>;
 	};
+
+	sound-hdmi {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "NVIDIA Tegra20 HDMI";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+
+			codec {
+				sound-dai = <&tegra_hdmi>;
+			};
+
+			cpu {
+				sound-dai = <&tegra_spdif>;
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
index 9f653ef41da4..842b5faba285 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -47,6 +47,16 @@
 		};
 	};
 
+	gpio@6000d000 {
+		/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+		pex-perst-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PEX_PERST_N";
+		};
+	};
+
 	/* Apalis UART1 */
 	serial@70006000 {
 		status = "okay";
@@ -181,7 +191,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "WAKE1_MICO";
 			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -236,13 +246,3 @@
 		vin-supply = <&reg_5v0>;
 	};
 };
-
-&gpio {
-	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PEX_PERST_N";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
index 86e138e8c7f0..ca277bf1df78 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -48,6 +48,16 @@
 		};
 	};
 
+	gpio@6000d000 {
+		/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+		pex-perst-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PEX_PERST_N";
+		};
+	};
+
 	/* Apalis UART1 */
 	serial@70006000 {
 		status = "okay";
@@ -182,7 +192,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "WAKE1_MICO";
 			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -254,13 +264,3 @@
 		vin-supply = <&vddio_sdmmc_1v8_reg>;
 	};
 };
-
-&gpio {
-	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "PEX_PERST_N";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
index 6a3a72f81c44..a4b7fe5c3d23 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
@@ -829,14 +829,17 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	hdmi_ddc: i2c@7000c700 {
@@ -990,7 +993,7 @@
 		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
@@ -1004,6 +1007,12 @@
 			/* ADC converstion time: 80 clocks */
 			st,sample-time = <4>;
 
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				/* forbid to use ADC channels 3-0 (touch) */
+				st,norequest-mask = <0x0F>;
+			};
+
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
 				/* 8 sample average control */
@@ -1020,12 +1029,6 @@
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
-
-			stmpe_adc {
-				compatible = "st,stmpe-adc";
-				/* forbid to use ADC channels 3-0 (touch) */
-				st,norequest-mask = <0x0F>;
-			};
 		};
 
 		/*
@@ -1047,9 +1050,6 @@
 			regulator-max-microvolt = <1400000>;
 			regulator-boot-on;
 			regulator-always-on;
-			ti,vsel0-state-low;
-			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
-			ti,vsel1-state-low;
 		};
 	};
 
@@ -1122,16 +1122,16 @@
 		mmc-ddr-1_8v;
 	};
 
-	clk32k_in: xtal1 {
+	clk16m: clock-osc4 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
+		clock-frequency = <16000000>;
 	};
 
-	clk16m: osc4 {
+	clk32k_in: clock-xtal1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <16000000>;
+		clock-frequency = <32768>;
 	};
 
 	reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 6544ce70b46f..d73103884000 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -820,14 +820,17 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	hdmi_ddc: i2c@7000c700 {
@@ -860,6 +863,7 @@
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
+			wakeup-source;
 
 			ti,system-power-controller;
 
@@ -972,7 +976,7 @@
 		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
@@ -986,6 +990,12 @@
 			/* ADC converstion time: 80 clocks */
 			st,sample-time = <4>;
 
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				/* forbid to use ADC channels 3-0 (touch) */
+				st,norequest-mask = <0x0F>;
+			};
+
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
 				/* 8 sample average control */
@@ -1002,12 +1012,6 @@
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
-
-			stmpe_adc {
-				compatible = "st,stmpe-adc";
-				/* forbid to use ADC channels 3-0 (touch) */
-				st,norequest-mask = <0x0F>;
-			};
 		};
 
 		/*
@@ -1029,9 +1033,6 @@
 			regulator-max-microvolt = <1400000>;
 			regulator-boot-on;
 			regulator-always-on;
-			ti,vsel0-state-low;
-			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
-			ti,vsel1-state-low;
 		};
 	};
 
@@ -1104,16 +1105,16 @@
 		mmc-ddr-1_8v;
 	};
 
-	clk32k_in: xtal1 {
+	clk16m: clock-osc4 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <32768>;
+		clock-frequency = <16000000>;
 	};
 
-	clk16m: osc4 {
+	clk32k_in: clock-xtal1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <16000000>;
+		clock-frequency = <32768>;
 	};
 
 	reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
diff --git a/arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi b/arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi
new file mode 100644
index 000000000000..bae09d82594d
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This dtsi file describes parts common for Asus T30 devices with a LVDS panel. */
+
+#include <dt-bindings/gpio/tegra-gpio.h>
+
+/ {
+	host1x@50000000 {
+		lcd: dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port@0 {
+					dpi_output: endpoint {
+						remote-endpoint = <&bridge_input>;
+						bus-width = <24>;
+					};
+				};
+			};
+		};
+	};
+
+	display-panel {
+		power-supply = <&vdd_pnl>;
+		ddc-i2c-bus = <&lcd_ddc>;
+		backlight = <&backlight>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&bridge_output>;
+			};
+		};
+	};
+
+	/* Texas Instruments SN75LVDS83B LVDS Transmitter */
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_input: endpoint {
+					remote-endpoint = <&dpi_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
index ac1c1a63eb0e..c0062353c1f1 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
@@ -8,6 +8,7 @@
 #include "tegra30.dtsi"
 #include "tegra30-cpu-opp.dtsi"
 #include "tegra30-cpu-opp-microvolt.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
 
 / {
 	aliases {
@@ -28,6 +29,14 @@
 	 */
 	chosen {};
 
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <0x0>;
+			tlm,version-minor = <0x0>;
+		};
+	};
+
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
@@ -59,35 +68,20 @@
 		};
 	};
 
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				port@0 {
-					lcd_output: endpoint {
-						remote-endpoint = <&lvds_encoder_input>;
-						bus-width = <24>;
-					};
-				};
-			};
+	gpio@6000d000 {
+		init-low-power-mode-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+			input;
 		};
-	};
 
-	gpio@6000d000 {
 		init-mode-hog {
 			gpio-hog;
-			gpios =	<TEGRA_GPIO(DD, 7) GPIO_ACTIVE_HIGH>,
+			gpios = <TEGRA_GPIO(DD, 7) GPIO_ACTIVE_HIGH>,
 				<TEGRA_GPIO(CC, 6) GPIO_ACTIVE_HIGH>,
 				<TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
 			output-low;
 		};
-
-		init-low-power-mode-hog {
-			gpio-hog;
-			gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
-			input;
-		};
 	};
 
 	pinmux@70000868 {
@@ -804,11 +798,13 @@
 
 	uartb: serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		/* GPS BCM4751 */
 	};
 
 	uartc: serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 
 		nvidia,adjust-baud-rates = <0 9600 100>,
@@ -819,6 +815,10 @@
 		bluetooth {
 			compatible = "brcm,bcm4330-bt";
 
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
 			max-speed = <4000000>;
 
 			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
@@ -828,8 +828,7 @@
 			vddio-supply = <&vdd_1v8>;
 
 			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
-			host-wakeup-gpios =   <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
-			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -842,7 +841,7 @@
 		status = "okay";
 
 		touchscreen@10 {
-			compatible ="elan,ektf3624";
+			compatible = "elan,ektf3624";
 			reg = <0x10>;
 
 			interrupt-parent = <&gpio>;
@@ -920,6 +919,10 @@
 			compatible = "onnn,nct1008";
 			reg = <0x4c>;
 			vcc-supply = <&vdd_3v3_sys>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 3) IRQ_TYPE_EDGE_FALLING>;
+
 			#thermal-sensor-cells = <1>;
 		};
 
@@ -927,7 +930,6 @@
 			compatible = "ti,bq27541";
 			reg = <0x55>;
 			power-supplies = <&power_supply>;
-			monitored-battery = <&battery_cell>;
 		};
 
 		power_supply: charger@6a {
@@ -938,9 +940,29 @@
 			interrupts = <TEGRA_GPIO(V, 1) IRQ_TYPE_EDGE_BOTH>;
 
 			summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW>;
+			summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>;
 			summit,enable-usb-charging;
 
 			monitored-battery = <&battery_cell>;
+
+			usb_vbus: usb-vbus {
+				regulator-name = "usb_vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-min-microamp = <750000>;
+				regulator-max-microamp = <750000>;
+
+				/*
+				 * SMB347 INOK input pin is connected to PMIC's
+				 * ACOK output, which is fixed to ACTIVE_LOW as
+				 * long as battery voltage is in a good range.
+				 *
+				 * Active INOK disables SMB347 output, so polarity
+				 * needs to be toggled when we want to get the
+				 * output.
+				 */
+				summit,needs-inok-toggle;
+			};
 		};
 	};
 
@@ -954,6 +976,7 @@
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	ahub@70080000 {
@@ -962,17 +985,6 @@
 		};
 	};
 
-	brcm_wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-
-		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
-		clock-names = "ext_clock";
-
-		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
-		post-power-on-delay-ms = <300>;
-		power-off-delay-us = <300>;
-	};
-
 	sdmmc3: mmc@78000400 {
 		status = "okay";
 
@@ -1013,12 +1025,13 @@
 	usb@7d000000 {
 		compatible = "nvidia,tegra30-udc";
 		status = "okay";
-		dr_mode = "peripheral";
+		dr_mode = "otg";
+		vbus-supply = <&usb_vbus>;
 	};
 
 	usb-phy@7d000000 {
 		status = "okay";
-		dr_mode = "peripheral";
+		dr_mode = "otg";
 		nvidia,hssync-start-delay = <0>;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
@@ -1042,7 +1055,7 @@
 	};
 
 	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -1056,19 +1069,22 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			cpu-supply = <&vdd_cpu>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			cpu-supply = <&vdd_cpu>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			cpu-supply = <&vdd_cpu>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -1084,44 +1100,20 @@
 		 */
 		compatible = "panel-lvds";
 
-		power-supply = <&vdd_pnl>;
-		backlight = <&backlight>;
-
 		width-mm = <94>;
 		height-mm = <150>;
 		rotation = <180>;
 
 		data-mapping = "jeida-24";
 
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&lvds_encoder_output>;
-			};
-		};
-	};
-
-	firmware {
-		trusted-foundations {
-			compatible = "tlm,trusted-foundations";
-			tlm,version-major = <0x0>;
-			tlm,version-minor = <0x0>;
-		};
+		/* DDC unconnected on Nexus 7 */
+		/delete-property/ ddc-i2c-bus;
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		hall-sensor {
-			label = "Lid";
-			gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			debounce-interval = <500>;
-			wakeup-event-action = <EV_ACT_DEASSERTED>;
-			wakeup-source;
-		};
-
-		power {
+		key-power {
 			label = "Power";
 			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -1130,7 +1122,16 @@
 			wakeup-source;
 		};
 
-		volume-up {
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
@@ -1139,45 +1140,29 @@
 			wakeup-source;
 		};
 
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
+		switch-hall-sensor {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
 			wakeup-source;
 		};
 	};
 
-	lvds-encoder {
-		compatible = "ti,sn75lvds83", "lvds-encoder";
-
-		powerdown-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
-		power-supply = <&vdd_3v3_sys>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lvds_encoder_input: endpoint {
-					remote-endpoint = <&lcd_output>;
-				};
-			};
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
 
-			port@1 {
-				reg = <1>;
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
 
-				lvds_encoder_output: endpoint {
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
+		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
 	};
 
-	vdd_5v0_sys: regulator@0 {
+	vdd_5v0_sys: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -1186,7 +1171,7 @@
 		regulator-boot-on;
 	};
 
-	vdd_3v3_sys: regulator@1 {
+	vdd_3v3_sys: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -1196,7 +1181,7 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_pnl: regulator@2 {
+	vdd_pnl: regulator-panel {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_panel";
 		regulator-min-microvolt = <3300000>;
@@ -1207,7 +1192,7 @@
 		vin-supply = <&vdd_3v3_sys>;
 	};
 
-	vcc_3v3_ts: regulator@3 {
+	vcc_3v3_ts: regulator-ts {
 		compatible = "regulator-fixed";
 		regulator-name = "ldo_s-1167_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -1249,11 +1234,52 @@
 	};
 
 	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone is a simpler solution which prevents Nexus 7
+		 * from getting too hot from a user's tactile perspective.
+		 * The CPU zone is intended to protect silicon from damage.
+		 */
+
 		skin-thermal {
 			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <0>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
 
 			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu-thermal {
@@ -1263,25 +1289,30 @@
 			thermal-sensors = <&nct72 1>;
 
 			trips {
-				trip0: cpu-alert0 {
-					/* throttle at 57C until temperature drops to 56.8C */
-					temperature = <57000>;
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
 					hysteresis = <200>;
 					type = "passive";
 				};
 
-				trip1: cpu-crit {
-					/* shut down at 60C */
-					temperature = <60000>;
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "critical";
 				};
 			};
 
 			cooling-maps {
-				map0 {
-					trip = <&trip0>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
index 17b6682ffce8..694c7fe37eb8 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
@@ -22,13 +22,6 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77620_default>;
 
-			max77620_default: pinmux {
-				gpio4 {
-					pins = "gpio4";
-					function = "32k-out1";
-				};
-			};
-
 			cpu-pwr-req-hog {
 				gpio-hog;
 				gpios = <6 GPIO_ACTIVE_HIGH>;
@@ -49,6 +42,13 @@
 				};
 			};
 
+			max77620_default: pinmux {
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+			};
+
 			regulators {
 				in-sd0-supply = <&vdd_5v0_sys>;
 				in-sd1-supply = <&vdd_5v0_sys>;
@@ -166,12 +166,12 @@
 		};
 	};
 
-	vdd_3v3_sys: regulator@1 {
+	vdd_3v3_sys: regulator-3v3 {
 		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
-	regulator@4 {
+	regulator-usb {
 		compatible = "regulator-fixed";
 		regulator-name = "avdd_usb";
 		regulator-min-microvolt = <3300000>;
@@ -182,4 +182,13 @@
 		enable-active-high;
 		vin-supply = <&vdd_3v3_sys>;
 	};
+
+	pmc@7000e400 {
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x3c>;
+			nvidia,reg-addr = <0x41>;
+			nvidia,reg-data = <0xe0>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi
index bcff0997ee51..8944a4a5a8d7 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi
@@ -1562,16 +1562,16 @@
 			};
 		};
 	};
-};
 
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@750000000,1300;
-	/delete-node/ opp@800000000,1300;
-	/delete-node/ opp@900000000,1350;
-};
+	opp-table-actmon {
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
 
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp@750000000;
-	/delete-node/ opp@800000000;
-	/delete-node/ opp@900000000;
+	opp-table-emc {
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
index bfc06b988781..ee4a3f482769 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
@@ -12,6 +12,7 @@
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
+			wakeup-source;
 
 			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
 			ti,system-power-controller;
@@ -142,8 +143,17 @@
 		};
 	};
 
-	vdd_3v3_sys: regulator@1 {
-		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+	vdd_3v3_sys: regulator-3v3 {
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	pmc@7000e400 {
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x80>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi
index a044dbd200a9..c19a0419112a 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi
@@ -6,20 +6,6 @@
 / {
 	compatible = "asus,grouper", "nvidia,tegra30";
 
-	display-panel {
-		panel-timing {
-			clock-frequency = <68000000>;
-			hactive = <800>;
-			vactive = <1280>;
-			hfront-porch = <24>;
-			hback-porch = <32>;
-			hsync-len = <24>;
-			vsync-len = <1>;
-			vfront-porch = <5>;
-			vback-porch = <32>;
-		};
-	};
-
 	pinmux@70000868 {
 		state_default: pinmux {
 			lcd_dc1_pd2 {
@@ -137,7 +123,6 @@
 		nfc@28 {
 			compatible = "nxp,pn544-i2c";
 			reg = <0x28>;
-			clock-frequency = <100000>;
 
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_EDGE_RISING>;
@@ -146,4 +131,18 @@
 			firmware-gpios = <&gpio TEGRA_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	display-panel {
+		panel-timing {
+			clock-frequency = <68000000>;
+			hactive = <800>;
+			vactive = <1280>;
+			hfront-porch = <24>;
+			hback-porch = <32>;
+			hsync-len = <24>;
+			vsync-len = <1>;
+			vfront-porch = <5>;
+			vback-porch = <32>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi
index a681ad51fddd..94c80134574e 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi
@@ -6,26 +6,10 @@
 / {
 	compatible = "asus,tilapia", "asus,grouper", "nvidia,tegra30";
 
-	display-panel {
-		enable-gpios = <&gpio TEGRA_GPIO(V, 6) GPIO_ACTIVE_HIGH>;
-
-		panel-timing {
-			clock-frequency = <81750000>;
-			hactive = <800>;
-			vactive = <1280>;
-			hfront-porch = <64>;
-			hback-porch = <128>;
-			hsync-len = <64>;
-			vsync-len = <1>;
-			vfront-porch = <5>;
-			vback-porch = <2>;
-		};
-	};
-
 	gpio@6000d000 {
 		init-mode-3g-hog {
 			gpio-hog;
-			gpios =	<TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>,
+			gpios = <TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>,
 				<TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>,
 				<TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>,
 				<TEGRA_GPIO(P, 1) GPIO_ACTIVE_HIGH>,
@@ -223,8 +207,6 @@
 			compatible = "nxp,pn544-i2c";
 			reg = <0x2a>;
 
-			clock-frequency = <100000>;
-
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(S, 7) IRQ_TYPE_EDGE_RISING>;
 
@@ -232,4 +214,20 @@
 			firmware-gpios = <&gpio TEGRA_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	display-panel {
+		enable-gpios = <&gpio TEGRA_GPIO(V, 6) GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <81750000>;
+			hactive = <800>;
+			vactive = <1280>;
+			hfront-porch = <64>;
+			hback-porch = <128>;
+			hsync-len = <64>;
+			vsync-len = <1>;
+			vfront-porch = <5>;
+			vback-porch = <2>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-asus-tf201.dts b/arch/arm/boot/dts/tegra30-asus-tf201.dts
new file mode 100644
index 000000000000..0406c5a69c12
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-tf201.dts
@@ -0,0 +1,644 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Asus Transformer Prime TF201";
+	compatible = "asus,tf201", "nvidia,tegra30";
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+						"lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Atmel MXT768E touchscreen */
+		touchscreen@4d {
+			compatible = "atmel,maxtouch";
+			reg = <0x4d>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <100000>;
+
+		magnetometer@e {
+			mount-matrix =  "-1",  "0",  "0",
+					 "0", "-1",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "1",  "0",  "0",
+							 "0", "-1",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Realtek ALC5631 audio codec */
+		rt5631: audio-codec@1a {
+			compatible = "realtek,rt5631";
+			reg = <0x1a>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 1GB EDB8132B2MA-8D-F LPDDR2 400MHz */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0x80000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0x80000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0x80000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0x80000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0x80000048
+					0x00000002 0x00000003 0x0000000c 0x00000007
+					0x00000009 0x00000001 0x00000002 0x00000006
+					0x00000001 0x00000000 0x00000004 0x00000004
+					0x04040001 0x000d090c 0x71c6120d 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* TF201 Unknown 1GB LPDDR2 500MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0x80000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0x80000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0x80000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0x80000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-500000000 {
+				clock-frequency = <500000000>;
+
+				nvidia,emem-configuration = < 0x00000007 0x8000005a
+					0x00000003 0x00000004 0x0000000e 0x00000009
+					0x0000000c 0x00000002 0x00000002 0x00000008
+					0x00000001 0x00000000 0x00000004 0x00000005
+					0x05040001 0x00100a0e 0x71c8170f 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 1GB EDB8132B2MA-8D-F LPDDR2 400MHz */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x00098000 0x00098000 0x00098000
+					0x00098000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x00000009 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x00098000 0x00098000 0x00098000
+					0x00098000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000018 0x00000018 0x00000018
+					0x00000018 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x00000009 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x000a0000 0x000a0000 0x000a0000
+					0x000a0000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00120220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x00440084
+					0x00008000 0x00074000 0x00074000 0x00074000
+					0x00074000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000018 0x00000018 0x00000018
+					0x00000018 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00078000 0x00078000 0x00078000
+					0x00078000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010082>;
+				nvidia,emc-mode-2 = <0x00020004>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000024>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000017
+					0x00000033 0x00000010 0x00000007 0x00000007
+					0x00000007 0x00000002 0x0000000a 0x00000007
+					0x00000007 0x00000003 0x00000002 0x00000000
+					0x00000003 0x00000007 0x00000004 0x0000000d
+					0x0000000e 0x000005e9 0x00000000 0x0000017a
+					0x00000002 0x00000002 0x00000007 0x00000000
+					0x00000001 0x0000000c 0x00000038 0x00000038
+					0x00000006 0x00000014 0x00000009 0x00000004
+					0x00000002 0x00000680 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0x001d0084
+					0x00008000 0x0002c000 0x0002c000 0x0002c000
+					0x0002c000 0x00000010 0x00000010 0x00000010
+					0x00000010 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000c0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00000000
+					0x00000024 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000ce6 0xe0000000 0xff00ff88 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* TF201 Unknown 1GB LPDDR2 500MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x00780084
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x00440084
+					0x00008000 0x00060000 0x00060000 0x00060000
+					0x00060000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000d0000 0x000d0000 0x000d0000
+					0x000d0000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-500000000 {
+				clock-frequency = <500000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020005>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000002d>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001d
+					0x00000040 0x00000014 0x00000008 0x00000007
+					0x00000009 0x00000003 0x0000000d 0x00000008
+					0x00000008 0x00000004 0x00000002 0x00000000
+					0x00000004 0x00000008 0x00000005 0x0000000d
+					0x0000000f 0x00000763 0x00000000 0x000001d8
+					0x00000003 0x00000003 0x00000008 0x00000000
+					0x00000001 0x0000000e 0x00000046 0x00000046
+					0x00000008 0x00000019 0x0000000b 0x00000004
+					0x00000002 0x00000820 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0xf0140091
+					0x00008000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x00080220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000b4 0x000d000d 0xa0f10404 0x00000000
+					0x00000000 0x80000fde 0xe0000000 0xff00ff88 >;
+			};
+		};
+	};
+
+	usb-phy@7d000000 {
+		/delete-property/ nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-setup = <5>;      /* Based on TF201 fuse value - 48 */
+	};
+
+	usb-phy@7d008000 {
+		/delete-property/ nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-setup = <5>;      /* Based on TF201 fuse value - 48 */
+	};
+
+	display-panel {
+		compatible = "hannstar,hsd101pww2";
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-533000000;
+		/delete-node/ opp-625000000;
+		/delete-node/ opp-667000000;
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-533000000-1200;
+		/delete-node/ opp-625000000-1200;
+		/delete-node/ opp-625000000-1250;
+		/delete-node/ opp-667000000-1200;
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf201",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Prime TF201 RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-tf300t.dts b/arch/arm/boot/dts/tegra30-asus-tf300t.dts
new file mode 100644
index 000000000000..970a1f08dc8c
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-tf300t.dts
@@ -0,0 +1,1032 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Asus Transformer Pad TF300T";
+	compatible = "asus,tf300t", "nvidia,tegra30";
+
+	gpio@6000d000 {
+		tf300t-init-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+						"lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Elantech EKTH1036 touchscreen */
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vdd_3v3_sys>;
+			vccio-supply = <&vdd_3v3_sys>;
+
+			touchscreen-size-x = <2240>;
+			touchscreen-size-y = <1408>;
+			touchscreen-inverted-y;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+
+		magnetometer@e {
+			mount-matrix =   "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "-1",  "0",  "0",
+					  "0",  "1",  "0",
+					  "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Wolfson Microelectronics WM8903 audio codec */
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <
+				0x00000600 /* DMIC_LR, output */
+				0x00000680 /* DMIC_DAT, input */
+				0x00000000 /* Speaker-enable GPIO, output, low */
+				0xffffffff /* don't touch */
+				0xffffffff /* don't touch */
+			>;
+
+			AVDD-supply  = <&vdd_1v8_vio>;
+			CPVDD-supply = <&vdd_1v8_vio>;
+			DBVDD-supply = <&vdd_1v8_vio>;
+			DCVDD-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00030003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x00000014 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00030003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010003 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0605 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000005
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x00000014 0xc0000079
+					0x00000003 0x00000004 0x00000011 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00140b11 0x70ea1f12 0x001f0000 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 1GB 667MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00140b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000a
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x0f000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000003 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000b 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000020
+					0x0000006a 0x00000018 0x00000008 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000a
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x00000008 0x00000008 0x00000008
+					0x00000008 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0155000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 1GB 667MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x00000009
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xd8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000006 0x00000006
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xd8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000016 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000008
+					0x00000008 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xf8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	display-panel {
+		compatible = "innolux,g101ice-l01";
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-wm8903-tf300t",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Asus Transformer Pad TF300T WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"IN2L", "Mic Jack",
+			"DMICDAT", "Int Mic";
+
+		nvidia,audio-codec = <&wm8903>;
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-tf300tg.dts b/arch/arm/boot/dts/tegra30-asus-tf300tg.dts
new file mode 100644
index 000000000000..4861db8e1e59
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-tf300tg.dts
@@ -0,0 +1,1104 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Asus Transformer Pad 3G TF300TG";
+	compatible = "asus,tf300tg", "nvidia,tegra30";
+
+	gpio@6000d000 {
+		tf300tg-init-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(P, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 5) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 5) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(Y, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(Y, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(EE, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 3) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+						"lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_cs2_n_pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+			};
+
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Elantech EKTH1036 touchscreen */
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vdd_3v3_sys>;
+			vccio-supply = <&vdd_3v3_sys>;
+
+			touchscreen-size-x = <2240>;
+			touchscreen-size-y = <1408>;
+			touchscreen-inverted-y;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+
+		magnetometer@e {
+			mount-matrix =   "1",  "0",  "0",
+					 "0", "-1",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "-1",  "0",  "0",
+					  "0",  "1",  "0",
+					  "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Realtek ALC5631 audio codec */
+		rt5631: audio-codec@1a {
+			compatible = "realtek,rt5631";
+			reg = <0x1a>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0xc000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0xc0000079
+					0x00000003 0x00000004 0x00000010 0x0000000b
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 1GB 667MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x73430303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x72830504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000003 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x72440a06 0x001f0000 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = < 0x00000005 0x8000003d
+					0x00000001 0x00000002 0x00000008 0x00000004
+					0x00000004 0x00000001 0x00000002 0x00000007
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000b0608 0x70850f09 0x001f0000 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = < 0x0000000a 0x80000079
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000a 0x00000001 0x00000003 0x0000000b
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00130b10 0x70ea1f11 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Elpida 1GB 667MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00050000 0x00050000 0x00050000
+					0x00050000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000002a0 0x0a00013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x0a000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Hynix 1GB 667MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000005
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200048>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000a
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200040>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200058>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000020
+					0x00000069 0x00000017 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* Micron 1GB 667MHZ */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000004 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000005 0x00000005
+					0x00000004 0x00000001 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x00000008 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000009 0x00000009
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x00000010 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000012 0x00000012
+					0x00000004 0x00000004 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000020 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000023 0x00000023
+					0x00000004 0x00000007 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x0000000f
+					0x00000034 0x0000000a 0x00000003 0x00000003
+					0x00000008 0x00000002 0x00000009 0x00000003
+					0x00000003 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x000009e9 0x00000000 0x0000027a
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000007 0x0000000e 0x00000039 0x00000200
+					0x00000004 0x0000000a 0x00000000 0x00000004
+					0x00000005 0x00000a2a 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x002600a4
+					0x00008000 0x0003c000 0x0003c000 0x0003c000
+					0x0003c000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00040000 0x00040000 0x00040000
+					0x00040000 0x000002a0 0x0800013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x018b000c 0xa0f10000 0x00000000
+					0x00000000 0x800014d4 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000069 0x00000016 0x00000007 0x00000005
+					0x0000000c 0x00000003 0x00000011 0x00000007
+					0x00000007 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000b 0x00000009 0x0000000b
+					0x00000011 0x00001412 0x00000000 0x00000504
+					0x00000002 0x0000000e 0x00000001 0x00000000
+					0x0000000c 0x00000016 0x00000072 0x00000200
+					0x00000005 0x00000015 0x00000000 0x00000006
+					0x00000007 0x00001453 0x0000000c 0x00000004
+					0x00000000 0x00000000 0x00005088 0xf00b0191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0600013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0156000c 0xa0f10000 0x00000000
+					0x00000000 0x800028a5 0xe8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	display-panel {
+		compatible = "innolux,g101ice-l01";
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf300tg",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Pad TF300TG RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-tf700t.dts b/arch/arm/boot/dts/tegra30-asus-tf700t.dts
new file mode 100644
index 000000000000..efde7dad718a
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-tf700t.dts
@@ -0,0 +1,840 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer-common.dtsi"
+
+/ {
+	model = "Asus Transformer Infinity TF700T";
+	compatible = "asus,tf700t", "nvidia,tegra30";
+
+	host1x@50000000 {
+		lcd: dc@54200000 {
+			clocks = <&tegra_car TEGRA30_CLK_DISP1>,
+				 <&tegra_car TEGRA30_CLK_PLL_D_OUT0>;
+
+			rgb {
+				status = "okay";
+
+				port@0 {
+					dpi_output: endpoint {
+						remote-endpoint = <&bridge_input>;
+						bus-width = <24>;
+					};
+				};
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6",
+						"lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs4_n_pk2 {
+				nvidia,pins = "gmi_cs4_n_pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@70006200 {
+		/* Azurewave AW-NH665 BCM4330B1 */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+		};
+	};
+
+	i2c@7000c400 {
+		/* Elantech ELAN-3024-7053 or 5184N FPC-1 REV: 2/3 touchscreen */
+		touchscreen@10 {
+			compatible = "elan,ektf3624";
+			reg = <0x10>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vcc33-supply = <&vdd_3v3_sys>;
+			vccio-supply = <&vdd_3v3_sys>;
+
+			touchscreen-size-x = <2944>;
+			touchscreen-size-y = <1856>;
+			touchscreen-inverted-y;
+		};
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <100000>;
+
+		magnetometer@e {
+			mount-matrix =   "1",  "0",  "0",
+					 "0", "-1",  "0",
+					 "0",  "0", "-1";
+		};
+
+		gyroscope@68 {
+			mount-matrix =   "0",  "1",  "0",
+					 "1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =   "0", "-1",  "0",
+							"-1",  "0",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		/* Realtek ALC5631 audio codec */
+		rt5631: audio-codec@1a {
+			compatible = "realtek,rt5631";
+			reg = <0x1a>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* Micron 1GB 800MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x75830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74630303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000002 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x73c30504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000004 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x73840a06 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000048
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000007 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086120a 0x001f0000 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emem-configuration = < 0x0000000c 0xc0000090
+					0x00000004 0x00000005 0x00000013 0x0000000c
+					0x0000000f 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d13 0x712c2414 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Elpida 1GB 800MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x75830303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000020
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0502 0x74630303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000030
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000002 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0503 0x73c30504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000005 0x00000002
+					0x00000004 0x00000001 0x00000003 0x00000008
+					0x00000002 0x00000001 0x00000002 0x00000006
+					0x06020102 0x000a0505 0x73840a06 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000048
+					0x00000001 0x00000002 0x00000009 0x00000005
+					0x00000007 0x00000001 0x00000002 0x00000008
+					0x00000002 0x00000002 0x00000003 0x00000006
+					0x06030202 0x000d0709 0x7086120a 0x001f0000 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emem-configuration = < 0x0000000c 0xc0000090
+					0x00000004 0x00000005 0x00000013 0x0000000c
+					0x0000000f 0x00000002 0x00000003 0x0000000c
+					0x00000002 0x00000002 0x00000004 0x00000008
+					0x08040202 0x00160d13 0x712c2414 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* Micron 1GB 800MHZ */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000006 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000007 0x00000007
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000d 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000000e 0x0000000e
+					0x00000004 0x00000003 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001a 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000001c 0x0000001c
+					0x00000004 0x00000005 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000035 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000038 0x00000038
+					0x00000004 0x00000009 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000012
+					0x00000066 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000bf0 0x00000000 0x000002fc
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000008 0x0000000f 0x0000006c 0x00000200
+					0x00000004 0x00000010 0x00000000 0x00000004
+					0x00000005 0x00000c30 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x001d0084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0600013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0158000c 0xa0f10000 0x00000000
+					0x00000000 0x800018c8 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000025
+					0x000000ce 0x0000001a 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000004 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000a
+					0x00000011 0x00001820 0x00000000 0x00000608
+					0x00000003 0x00000012 0x00000001 0x00000000
+					0x0000000f 0x00000018 0x000000d8 0x00000200
+					0x00000005 0x00000020 0x00000000 0x00000007
+					0x00000008 0x00001860 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf0070191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0800013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00f0000c 0xa0f10000 0x00000000
+					0x00000000 0x8000308c 0xe8000000 0xff00ff49 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* Elpida 1GB 800MHZ */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000006 0x00000000 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x000000c0 0x00000000 0x00000030
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000007 0x00000007
+					0x00000004 0x00000002 0x00000000 0x00000004
+					0x00000005 0x000000c7 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000002
+					0x0000000d 0x00000001 0x00000000 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000000
+					0x00000000 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000181 0x00000000 0x00000060
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000000e 0x0000000e
+					0x00000004 0x00000003 0x00000000 0x00000004
+					0x00000005 0x0000018e 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000004
+					0x0000001a 0x00000003 0x00000001 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000001
+					0x00000001 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000005 0x00000004 0x0000000a
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x0000001c 0x0000001c
+					0x00000004 0x00000005 0x00000000 0x00000004
+					0x00000005 0x0000031c 0x00000006 0x00000004
+					0x00000000 0x00000000 0x00004288 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00000000
+					0x00000040 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000009
+					0x00000035 0x00000007 0x00000002 0x00000002
+					0x0000000a 0x00000005 0x0000000b 0x00000002
+					0x00000002 0x00000003 0x00000001 0x00000000
+					0x00000005 0x00000006 0x00000004 0x0000000a
+					0x0000000b 0x00000607 0x00000000 0x00000181
+					0x00000002 0x00000002 0x00000001 0x00000000
+					0x00000007 0x0000000f 0x00000038 0x00000038
+					0x00000004 0x00000009 0x00000000 0x00000004
+					0x00000005 0x00000638 0x00000007 0x00000004
+					0x00000000 0x00000000 0x00004288 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000002a0 0x0800211c 0x00000000
+					0x77fff884 0x01f1f108 0x05057404 0x54000007
+					0x08000168 0x08000000 0x00000802 0x00020000
+					0x00000100 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000d22 0xe8000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration =  < 0x00000012
+					0x00000066 0x0000000c 0x00000004 0x00000003
+					0x00000008 0x00000002 0x0000000a 0x00000004
+					0x00000004 0x00000002 0x00000001 0x00000000
+					0x00000004 0x00000006 0x00000004 0x0000000a
+					0x0000000c 0x00000bf0 0x00000000 0x000002fc
+					0x00000001 0x00000008 0x00000001 0x00000000
+					0x00000008 0x0000000f 0x0000006c 0x00000200
+					0x00000004 0x00000010 0x00000000 0x00000004
+					0x00000005 0x00000c30 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00007088 0x001d0084
+					0x00008000 0x00044000 0x00044000 0x00044000
+					0x00044000 0x00014000 0x00014000 0x00014000
+					0x00014000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x000002a0 0x0600013d 0x00000000
+					0x77fff884 0x01f1f508 0x05057404 0x54000007
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x0158000c 0xa0f10000 0x00000000
+					0x00000000 0x800018c8 0xe8000000 0xff00ff89 >;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000025
+					0x000000ce 0x0000001a 0x00000009 0x00000005
+					0x0000000d 0x00000004 0x00000013 0x00000009
+					0x00000009 0x00000004 0x00000001 0x00000000
+					0x00000007 0x0000000a 0x00000009 0x0000000a
+					0x00000011 0x00001820 0x00000000 0x00000608
+					0x00000003 0x00000012 0x00000001 0x00000000
+					0x0000000f 0x00000018 0x000000d8 0x00000200
+					0x00000005 0x00000020 0x00000000 0x00000007
+					0x00000008 0x00001860 0x0000000b 0x00000006
+					0x00000000 0x00000000 0x00005088 0xf0070191
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00018000 0x00018000 0x00018000
+					0x00018000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x000002a0 0x0a00013d 0x22220000
+					0x77fff884 0x01f1f501 0x07077404 0x54000000
+					0x080001e8 0x08000021 0x00000802 0x00020000
+					0x00000100 0x00f0000c 0xa0f10000 0x00000000
+					0x00000000 0x8000308c 0xe8000000 0xff00ff49 >;
+			};
+		};
+	};
+
+	tc358768_refclk: clock-tc358768 {
+		compatible = "fixed-clock";
+		clock-frequency = <23100000>;
+		clock-accuracy = <100>;
+		#clock-cells = <0>;
+	};
+
+	tc358768_osc: clock-tc358768-osc-gate {
+		compatible = "gpio-gate-clock";
+		enable-gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>;
+		clocks = <&tc358768_refclk>;
+		#clock-cells = <0>;
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-gpio";
+
+		mux-gpios = <&gpio TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&lcd_ddc>;
+		idle-state = <0x0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi@7 {
+				compatible = "toshiba,tc358768";
+				reg = <0x7>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clocks = <&tc358768_osc>;
+				clock-names = "refclk";
+
+				reset-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+
+				vddc-supply = <&vdd_1v2_mipi>;
+				vddio-supply = <&vdd_1v8_vio>;
+				vddmipi-supply = <&vdd_1v2_mipi>;
+
+				/*
+				 * Panasonic VVX10F004B00 or HYDIS HV101WU1-1E1
+				 * LCD SuperIPS+ Full HD panel.
+				 */
+				panel@1 {
+					compatible = "panasonic,vvx10f004b00";
+					reg = <1>;
+
+					power-supply = <&vdd_pnl>;
+					backlight = <&backlight>;
+
+					port {
+						panel_input: endpoint {
+							remote-endpoint = <&bridge_output>;
+						};
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						bridge_input: endpoint {
+							remote-endpoint = <&dpi_output>;
+							data-lines = <24>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						bridge_output: endpoint {
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-900000000-1350;
+	};
+
+	vdd_1v2_mipi: regulator-mipi {
+		compatible = "regulator-fixed";
+		regulator-name = "tc358768_1v2_vdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-enable-ramp-delay = <10000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-rt5631-tf700t",
+			     "nvidia,tegra-audio-rt5631";
+		nvidia,model = "Asus Transformer Infinity TF700T RT5631";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR",
+			"Int Spk", "SPOL",
+			"Int Spk", "SPOR",
+			"MIC1", "MIC Bias1",
+			"MIC Bias1", "Mic Jack",
+			"DMIC", "Int Mic";
+
+		nvidia,audio-codec = <&rt5631>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
new file mode 100644
index 000000000000..bdb898ad6262
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
@@ -0,0 +1,1788 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = "/mmc@78000600"; /* eMMC */
+		mmc1 = "/mmc@78000000"; /* uSD slot */
+		mmc2 = "/mmc@78000400"; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		display0 = &lcd;
+		display1 = &hdmi;
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>;		/* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@beb00000 {
+			compatible = "ramoops";
+			reg = <0xbeb00000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;	/* 2MB */
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi: hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&vdd_1v8_vio>;
+			vdd-supply = <&vdd_3v3_sys>;
+
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+		};
+	};
+
+	gpio@6000d000 {
+		init-lpm-in-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		init-lpm-out-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(K, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+
+		usb-charge-limit-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			output-high;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* SDMMC1 pinmux */
+			sdmmc1_clk {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1_cmd {
+				nvidia,pins = "sdmmc1_dat3_py4",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1_cd {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1_wp {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC2 pinmux */
+			vi_d1_pd5 {
+				nvidia,pins = "vi_d1_pd5",
+						"vi_d2_pl0",
+						"vi_d3_pl1",
+						"vi_d5_pl3",
+						"vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d8_pl6 {
+				nvidia,pins = "vi_d8_pl6",
+						"vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3_clk {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_cmd {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_dat4_pd1",
+						"sdmmc3_dat5_pd0",
+						"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4_clk {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_cmd {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_rst_n {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			cam_mclk {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			drive_sdmmc4 {
+				nvidia,pins = "drive_gma",
+						"drive_gmb",
+						"drive_gmc",
+						"drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			/* I2C pinmux */
+			gen1_i2c {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			gen2_i2c {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			cam_i2c {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			ddc_i2c {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			pwr_i2c {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			hotplug_i2c {
+				nvidia,pins = "pu4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI pinmux */
+			hdmi_cec {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			hdmi_hpd {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-A */
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-B */
+			uartb_txd_rts {
+				nvidia,pins = "uart2_txd_pc2",
+						"uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uartb_rxd_cts {
+				nvidia,pins = "uart2_rxd_pc3",
+						"uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-C */
+			uartc_rxd_cts {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uartc_txd_rts {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D */
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_dir_py1",
+						"ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* I2S pinmux */
+			dap_i2s0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_din_pn1",
+						"dap1_dout_pn2",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap_i2s1 {
+				nvidia,pins = "dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_fs {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_dout {
+				nvidia,pins = "dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap_i2s3 {
+				nvidia,pins = "dap4_fs_pp4",
+						"dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Sensors pinmux */
+			nct_irq {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Asus EC pinmux */
+			ec_irqs {
+				nvidia,pins = "kb_row10_ps2",
+						"kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ec_reqs {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Memory type bootstrap */
+			mem_boostraps {
+				nvidia,pins = "gmi_ad4_pg4",
+						"gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PCI-e pinmux */
+			pex_l2_rst_n {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+						"pex_l0_rst_n_pdd1",
+						"pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_clkreq_n {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7",
+						"pex_l0_prsnt_n_pdd0",
+						"pex_l0_clkreq_n_pdd2",
+						"pex_wake_n_pdd3",
+						"pex_l1_prsnt_n_pdd4",
+						"pex_l1_clkreq_n_pdd6",
+						"pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SPI pinmux */
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4",
+						"spi1_sck_px5",
+						"spi1_cs0_n_px6",
+						"spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			hp_detect {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			mic_detect {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a16_pj7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_a18_pb1 {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a19_pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Display A pinmux */
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+						"lcd_pclk_pb3",
+						"lcd_pwr1_pc1",
+						"lcd_d0_pe0",
+						"lcd_d1_pe1",
+						"lcd_d2_pe2",
+						"lcd_d3_pe3",
+						"lcd_d4_pe4",
+						"lcd_d5_pe5",
+						"lcd_d6_pe6",
+						"lcd_d7_pe7",
+						"lcd_d8_pf0",
+						"lcd_d9_pf1",
+						"lcd_d10_pf2",
+						"lcd_d11_pf3",
+						"lcd_d12_pf4",
+						"lcd_d13_pf5",
+						"lcd_d14_pf6",
+						"lcd_d15_pf7",
+						"lcd_de_pj1",
+						"lcd_hsync_pj3",
+						"lcd_vsync_pj4",
+						"lcd_d16_pm0",
+						"lcd_d17_pm1",
+						"lcd_d18_pm2",
+						"lcd_d19_pm3",
+						"lcd_d20_pm4",
+						"lcd_d21_pm5",
+						"lcd_d22_pm6",
+						"lcd_d23_pm7",
+						"lcd_dc0_pn6",
+						"lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_cs0_n_pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4",
+						"lcd_sdout_pn5",
+						"lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			blink {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC keys */
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col1_pq1 {
+				nvidia,pins = "kb_row1_pr1",
+						"kb_row3_pr3",
+						"kb_row8_ps0",
+						"kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4",
+						"kb_col5_pq5",
+						"kb_col7_pq7",
+						"kb_row2_pr2",
+						"kb_row4_pr4",
+						"kb_row5_pr5",
+						"kb_row12_ps4",
+						"kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+						"gmi_wait_pi7",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs0_n_pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0",
+						"gmi_cs1_n_pj2",
+						"gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_pclk_pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* GPIO keys pinmux */
+			power_key {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vol_keys {
+				nvidia,pins = "kb_col2_pq2",
+						"kb_col3_pq3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Bluetooth */
+			bt_shutdown {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			bt_dev_wake {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			bt_host_wake {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_vsync_pd6 {
+				nvidia,pins = "vi_vsync_pd6",
+						"vi_hsync_pd7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			vi_d10_pt2 {
+				nvidia,pins = "vi_d10_pt2",
+						"vi_d0_pt4", "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1",
+						"gmi_ad2_pg2",
+						"gmi_ad3_pg3",
+						"gmi_ad6_pg6",
+						"gmi_ad7_pg7",
+						"gmi_wr_n_pi0",
+						"gmi_oe_n_pi1",
+						"gmi_dqs_pi2",
+						"gmi_adv_n_pk0",
+						"gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad11_ph3",
+						"gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4",
+						"gmi_rst_n_pi4",
+						"gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Vibrator control */
+			vibrator {
+				nvidia,pins = "gmi_ad15_ph7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* PWM pimnmux */
+			pwm_0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwm_2 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs6_n_pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Spdif pinmux */
+			spdif_out {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_in {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d4_pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d6_pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			vi_mclk_pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+						"crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1_out {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_out {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_out {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sys_clk_req {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5",
+						"clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive_dap1 {
+				nvidia,pins = "drive_dap1",
+						"drive_dap2",
+						"drive_dbg",
+						"drive_at5",
+						"drive_gme",
+						"drive_ddc",
+						"drive_ao1",
+						"drive_uart3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1",
+						"drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+		};
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Broadcom GPS BCM47511 */
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		bluetooth {
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply  = <&vdd_3v3_com>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	lcd_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0x0e>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			dvdd-supply = <&vdd_1v8_vio>;
+		};
+
+		/* Dynaimage ambient light sensor */
+		light-sensor@1c {
+			compatible = "dynaimage,al3010";
+			reg = <0x1c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply    = <&vdd_3v3_sys>;
+			vlogic-supply = <&vdd_1v8_vio>;
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0x0f>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(O, 5) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_vio>;
+					vddio-supply = <&vdd_1v8_vio>;
+				};
+			};
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <93750>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Texas Instruments TPS659110 PMIC */
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_bat>;
+			vcc2-supply = <&vdd_5v0_bat>;
+			vcc3-supply = <&vdd_1v8_vio>;
+			vcc4-supply = <&vdd_5v0_sys>;
+			vcc5-supply = <&vdd_5v0_bat>;
+			vcc6-supply = <&vdd_3v3_sys>;
+			vcc7-supply = <&vdd_5v0_bat>;
+			vccio-supply = <&vdd_5v0_bat>;
+
+			pmic-sleep-hog {
+				gpio-hog;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+				output-high;
+			};
+
+			regulators {
+				/* VDD1 is not used by Transformers */
+
+				vddio_ddr: vdd2 {
+					regulator-name = "vddio_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8_vio: vio {
+					regulator-name = "vdd_1v8_gen";
+					/* FIXME: eMMC won't work, if set to 1.8 V */
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* eMMC VDD */
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_emmc_core";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDD */
+				vdd_usd: ldo2 {
+					regulator-name = "vdd_usd";
+					regulator-min-microvolt = <3100000>;
+					regulator-max-microvolt = <3100000>;
+					/* FIXME: Without this, voltage switching fails */
+					regulator-always-on;
+				};
+
+				/* uSD slot VDDIO */
+				vddio_usd: ldo3 {
+					regulator-name = "vddio_usd";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3100000>;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* LDO5 is not used by Transformers */
+
+				ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1770000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		/* FIXME: LP1 doesn't work at the moment */
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		/* Set DEV_OFF + PWR_OFF_SET bit in DCDC control register of TPS65911 PMIC  */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x81>;
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {		/* i2s1 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 {		/* i2s3 */
+			status = "okay";
+		};
+	};
+
+	mmc@78000000 {
+		status = "okay";
+
+		/* FIXME: Full 208Mhz clock rate doesn't work reliably */
+		max-frequency = <104000000>;
+
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+
+		vmmc-supply = <&vdd_usd>;	/* ldo2 */
+		vqmmc-supply = <&vddio_usd>;	/* ldo3 */
+	};
+
+	mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_com>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* Azurewave AW-NH615 BCM4329B1 or AW-NH665 BCM4330B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+		mmc-ddr-3_3v;
+		non-removable;
+	};
+
+	/* USB via ASUS connector */
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_5v0_bat>;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_5v0_bl>;
+		pwms = <&pwm 0 4000000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <40>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-dock-hall-sensor {
+			label = "Lid sensor";
+			gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		switch-lineout-detect {
+			label = "Audio dock line-out detect";
+			gpios = <&gpio TEGRA_GPIO(X, 3) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEOUT_INSERT>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	vdd_5v0_bat: regulator-bat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_cp: regulator-sby {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sby";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_5v0_sys: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_1v5_ddr: regulator-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_3v3_sys: regulator-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	vdd_pnl: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <20000>;
+		gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_com: regulator-com {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_5v0_bl: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_bat>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		nvidia,i2s-controller = <&tegra_i2s1>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>;
+		nvidia,coupled-mic-hp-det;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * Transformers from getting too hot from a user's
+		 * tactile perspective. The CPU zone is intended to
+		 * protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 75C until temperature drops to 74.8C */
+					temperature = <75000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index e0624b74fb50..51769d5132ae 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -1776,6 +1776,7 @@
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
+			wakeup-source;
 
 			ti,system-power-controller;
 
@@ -1897,7 +1898,8 @@
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spi-flash@1 {
+
+		flash@1 {
 			compatible = "winbond,w25q32", "jedec,spi-nor";
 			reg = <1>;
 			spi-max-frequency = <20000000>;
@@ -1914,6 +1916,7 @@
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&core_vdd_reg>;
 	};
 
 	ahub@70080000 {
@@ -1965,12 +1968,34 @@
 		status = "okay";
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
 	};
 
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@2 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@3 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 
@@ -1984,7 +2009,7 @@
 		};
 	};
 
-	vdd_5v_in_reg: regulator@0 {
+	vdd_5v_in_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v_in";
 		regulator-min-microvolt = <5000000>;
@@ -1992,7 +2017,7 @@
 		regulator-always-on;
 	};
 
-	chargepump_5v_reg: regulator@1 {
+	chargepump_5v_reg: regulator-chargepump {
 		compatible = "regulator-fixed";
 		regulator-name = "chargepump_5v";
 		regulator-min-microvolt = <5000000>;
@@ -2003,7 +2028,7 @@
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	ddr_reg: regulator@2 {
+	ddr_reg: regulator-ddr {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ddr";
 		regulator-min-microvolt = <1500000>;
@@ -2015,7 +2040,7 @@
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	vdd_5v_sata_reg: regulator@3 {
+	vdd_5v_sata_reg: regulator-sata {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v_sata";
 		regulator-min-microvolt = <5000000>;
@@ -2027,7 +2052,7 @@
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	usb1_vbus_reg: regulator@4 {
+	usb1_vbus_reg: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -2038,7 +2063,7 @@
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	usb3_vbus_reg: regulator@5 {
+	usb3_vbus_reg: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -2049,7 +2074,7 @@
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	sys_3v3_reg: regulator@6 {
+	sys_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3,vdd_3v3_alw";
 		regulator-min-microvolt = <3300000>;
@@ -2061,7 +2086,7 @@
 		vin-supply = <&vdd_5v_in_reg>;
 	};
 
-	sys_3v3_pexs_reg: regulator@7 {
+	sys_3v3_pexs_reg: regulator-pexs {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3_pexs";
 		regulator-min-microvolt = <3300000>;
@@ -2073,7 +2098,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_5v0_hdmi: regulator@8 {
+	vdd_5v0_hdmi: regulator-hdmi {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_5V_HDMI";
 		regulator-min-microvolt = <5000000>;
@@ -2110,26 +2135,4 @@
 		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
 					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
-
-	cpus {
-		cpu0: cpu@0 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@1 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@2 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@3 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
index 4899e05a0d9c..247185314f46 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -16,7 +16,7 @@
 		keep-power-in-suspend;
 	};
 
-	ddr_reg: regulator@100 {
+	ddr_reg: regulator-ddr {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ddr";
 		regulator-min-microvolt = <1500000>;
@@ -27,7 +27,7 @@
 		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 	};
 
-	sys_3v3_reg: regulator@101 {
+	sys_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -38,7 +38,7 @@
 		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb1_vbus_reg: regulator@102 {
+	usb1_vbus_reg: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -49,7 +49,7 @@
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	usb3_vbus_reg: regulator@103 {
+	usb3_vbus_reg: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -60,7 +60,7 @@
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	vdd_5v0_reg: regulator@104 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "5v0";
 		regulator-min-microvolt = <5000000>;
@@ -69,7 +69,7 @@
 		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
 	};
 
-	vdd_bl_reg: regulator@105 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
index c1c0ca628af1..2911f08863a0 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
@@ -2,8 +2,6 @@
 /dts-v1/;
 
 #include "tegra30-cardhu.dtsi"
-#include "tegra30-cpu-opp.dtsi"
-#include "tegra30-cpu-opp-microvolt.dtsi"
 
 /* This dts file support the cardhu A04 and later versions of board */
 
@@ -18,7 +16,7 @@
 		keep-power-in-suspend;
 	};
 
-	ddr_reg: regulator@100 {
+	ddr_reg: regulator-ddr {
 		compatible = "regulator-fixed";
 		regulator-name = "ddr";
 		regulator-min-microvolt = <1500000>;
@@ -29,7 +27,7 @@
 		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
 	};
 
-	sys_3v3_reg: regulator@101 {
+	sys_3v3_reg: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -40,7 +38,7 @@
 		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb1_vbus_reg: regulator@102 {
+	usb1_vbus_reg: regulator-usb1 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -51,7 +49,7 @@
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	usb3_vbus_reg: regulator@103 {
+	usb3_vbus_reg: regulator-usb3 {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -62,7 +60,7 @@
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	vdd_5v0_reg: regulator@104 {
+	vdd_5v0_reg: regulator-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "5v0";
 		regulator-min-microvolt = <5000000>;
@@ -71,7 +69,7 @@
 		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
 	};
 
-	vdd_bl_reg: regulator@105 {
+	vdd_bl_reg: regulator-bl {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl";
 		regulator-min-microvolt = <5000000>;
@@ -82,7 +80,7 @@
 		gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
 	};
 
-	vdd_bl2_reg: regulator@106 {
+	vdd_bl2_reg: regulator-bl2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_bl2";
 		regulator-min-microvolt = <5000000>;
@@ -92,50 +90,4 @@
 		enable-active-high;
 		gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
 	};
-
-	i2c@7000d000 {
-		pmic: tps65911@2d {
-			regulators {
-				vddctrl_reg: vddctrl {
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1125000>;
-					regulator-coupled-with = <&vddcore_reg>;
-					regulator-coupled-max-spread = <300000>;
-					regulator-max-step-microvolt = <100000>;
-
-					nvidia,tegra-cpu-regulator;
-				};
-			};
-		};
-
-		vddcore_reg: tps62361@60 {
-			regulator-coupled-with = <&vddctrl_reg>;
-			regulator-coupled-max-spread = <300000>;
-			regulator-max-step-microvolt = <100000>;
-
-			nvidia,tegra-core-regulator;
-		};
-	};
-
-	cpus {
-		cpu0: cpu@0 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@1 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@2 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@3 {
-			cpu-supply = <&vddctrl_reg>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index dab9989fa760..37a9c5a0ca30 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -1,6 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
 
 /**
  * This file contains common DT entry for all fab version of Cardhu.
@@ -172,6 +175,7 @@
 
 	serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 	};
 
@@ -206,7 +210,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x70>;
-			reset-gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>;
+			reset-gpios = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -240,6 +244,7 @@
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
+			wakeup-source;
 
 			ti,system-power-controller;
 
@@ -272,9 +277,14 @@
 
 				vddctrl_reg: vddctrl {
 					regulator-name = "vdd_cpu,vdd_sys";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
 					regulator-always-on;
+
+					nvidia,tegra-cpu-regulator;
 				};
 
 				vio_reg: vio {
@@ -334,32 +344,39 @@
 			};
 		};
 
-		temperature-sensor@4c {
+		nct1008: temperature-sensor@4c {
 			compatible = "onnn,nct1008";
 			reg = <0x4c>;
 			vcc-supply = <&sys_3v3_reg>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+			#thermal-sensor-cells = <1>;
 		};
 
-		tps62361@60 {
+		vdd_core: tps62361@60 {
 			compatible = "ti,tps62361";
 			reg = <0x60>;
 
 			regulator-name = "tps62361-vout";
 			regulator-min-microvolt = <500000>;
 			regulator-max-microvolt = <1500000>;
+			regulator-coupled-with = <&vddctrl_reg>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
 			regulator-boot-on;
 			regulator-always-on;
 			ti,vsel0-state-high;
 			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
 		};
 	};
 
 	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
-		spi-flash@1 {
+
+		flash@1 {
 			compatible = "winbond,w25q32", "jedec,spi-nor";
 			reg = <1>;
 			spi-max-frequency = <20000000>;
@@ -376,6 +393,7 @@
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
 	ahub@70080000 {
@@ -418,12 +436,65 @@
 		default-brightness-level = <6>;
 	};
 
-	clk32k_in: clock@0 {
+	clk32k_in: clock-32k {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 		#clock-cells = <0>;
 	};
 
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			interrupt-parent = <&pmic>;
+			interrupts = <2 0>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
+
 	panel: panel {
 		compatible = "chunghwa,claa101wb01";
 		ddc-i2c-bus = <&panelddc>;
@@ -434,7 +505,7 @@
 		backlight = <&backlight>;
 	};
 
-	vdd_ac_bat_reg: regulator@0 {
+	vdd_ac_bat_reg: regulator-acbat {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ac_bat";
 		regulator-min-microvolt = <5000000>;
@@ -442,7 +513,7 @@
 		regulator-always-on;
 	};
 
-	cam_1v8_reg: regulator@1 {
+	cam_1v8_reg: regulator-cam {
 		compatible = "regulator-fixed";
 		regulator-name = "cam_1v8";
 		regulator-min-microvolt = <1800000>;
@@ -452,7 +523,7 @@
 		vin-supply = <&vio_reg>;
 	};
 
-	cp_5v_reg: regulator@2 {
+	cp_5v_reg: regulator-5v0cp {
 		compatible = "regulator-fixed";
 		regulator-name = "cp_5v";
 		regulator-min-microvolt = <5000000>;
@@ -463,7 +534,7 @@
 		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	emmc_3v3_reg: regulator@3 {
+	emmc_3v3_reg: regulator-emmc {
 		compatible = "regulator-fixed";
 		regulator-name = "emmc_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -475,7 +546,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	modem_3v3_reg: regulator@4 {
+	modem_3v3_reg: regulator-modem {
 		compatible = "regulator-fixed";
 		regulator-name = "modem_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -484,7 +555,7 @@
 		gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
 	};
 
-	pex_hvdd_3v3_reg: regulator@5 {
+	pex_hvdd_3v3_reg: regulator-pex {
 		compatible = "regulator-fixed";
 		regulator-name = "pex_hvdd_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -494,7 +565,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_cam1_ldo_reg: regulator@6 {
+	vdd_cam1_ldo_reg: regulator-cam1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_cam1_ldo";
 		regulator-min-microvolt = <2800000>;
@@ -504,7 +575,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_cam2_ldo_reg: regulator@7 {
+	vdd_cam2_ldo_reg: regulator-cam2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_cam2_ldo";
 		regulator-min-microvolt = <2800000>;
@@ -514,7 +585,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_cam3_ldo_reg: regulator@8 {
+	vdd_cam3_ldo_reg: regulator-cam3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_cam3_ldo";
 		regulator-min-microvolt = <3300000>;
@@ -524,7 +595,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_com_reg: regulator@9 {
+	vdd_com_reg: regulator-com {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_com";
 		regulator-min-microvolt = <3300000>;
@@ -536,7 +607,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_fuse_3v3_reg: regulator@10 {
+	vdd_fuse_3v3_reg: regulator-fuse {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_fuse_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -546,7 +617,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_pnl1_reg: regulator@11 {
+	vdd_pnl1_reg: regulator-pnl1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_pnl1";
 		regulator-min-microvolt = <3300000>;
@@ -558,7 +629,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_vid_reg: regulator@12 {
+	vdd_vid_reg: regulator-vid {
 		compatible = "regulator-fixed";
 		regulator-name = "vddio_vid";
 		regulator-min-microvolt = <5000000>;
@@ -589,7 +660,7 @@
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
+			GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
@@ -603,30 +674,38 @@
 					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
 
-		power {
-			label = "Power";
-			interrupt-parent = <&pmic>;
-			interrupts = <2 0>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <100>;
-			wakeup-source;
-		};
+			thermal-sensors = <&nct1008 1>;
 
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <10>;
-		};
+			trips {
+				trip0: cpu-alert0 {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
 
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <10>;
+				trip1: cpu-crit {
+					/* shut down at 60C */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 7d4a6ca4936a..36615c5fda2c 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -136,7 +136,7 @@
 		pwms = <&pwm 0 5000000>; /* PWM<A> */
 	};
 
-	clk16m: osc3 {
+	clk16m: clock-osc3 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <16000000>;
@@ -145,7 +145,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "SODIMM pin 45 wakeup";
 			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index e36aa3ce6c3d..ed6106f1bea1 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -20,6 +20,15 @@
 		};
 	};
 
+	gpio: gpio@6000d000 {
+		lan-reset-n-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "LAN_RESET#";
+		};
+	};
+
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -239,7 +248,7 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 			spdif-in-pk6 {
-				nvidia,pins =	"spdif_in_pk6";
+				nvidia,pins = "spdif_in_pk6";
 				nvidia,function = "hda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -364,7 +373,7 @@
 			};
 			/* Multiplexed and therefore disabled */
 			cam-mclk-pcc0 {
-				nvidia,pins =	"cam_mclk_pcc0";
+				nvidia,pins = "cam_mclk_pcc0";
 				nvidia,function = "vi_alt3";
 				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
@@ -511,7 +520,7 @@
 
 			/* Colibri USBC_DET */
 			spdif-out-pk5 {
-				nvidia,pins =	"spdif_out_pk5";
+				nvidia,pins = "spdif_out_pk5";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -701,10 +710,12 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 	};
 
 	hdmi_ddc: i2c@7000c700 {
@@ -737,6 +748,7 @@
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
+			wakeup-source;
 
 			ti,system-power-controller;
 
@@ -764,9 +776,14 @@
 
 				vddctrl_reg: vddctrl {
 					regulator-name = "+V1.0_VDD_CPU";
-					regulator-min-microvolt = <1150000>;
-					regulator-max-microvolt = <1150000>;
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
 					regulator-always-on;
+
+					nvidia,tegra-cpu-regulator;
 				};
 
 				reg_1v8_vio: vio {
@@ -841,7 +858,7 @@
 		touchscreen@41 {
 			compatible = "st,stmpe811";
 			reg = <0x41>;
-			irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 			interrupt-controller;
 			id = <0>;
 			blocks = <0x5>;
@@ -856,6 +873,11 @@
 			st,sample-time = <4>;
 			/* forbid to use ADC channels 3-0 (touch) */
 
+			stmpe_adc {
+				compatible = "st,stmpe-adc";
+				st,norequest-mask = <0x0F>;
+			};
+
 			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
 				/* 8 sample average control */
@@ -872,11 +894,6 @@
 				/* 5 ms touch detect interrupt delay */
 				st,touch-det-delay = <5>;
 			};
-
-			stmpe_adc {
-				compatible = "st,stmpe-adc";
-				st,norequest-mask = <0x0F>;
-			};
 		};
 
 		/*
@@ -889,18 +906,20 @@
 		};
 
 		/* SW: +V1.2_VDD_CORE */
-		regulator@60 {
+		vdd_core: regulator@60 {
 			compatible = "ti,tps62362";
 			reg = <0x60>;
 
 			regulator-name = "tps62362-vout";
 			regulator-min-microvolt = <900000>;
 			regulator-max-microvolt = <1400000>;
+			regulator-coupled-with = <&vddctrl_reg>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
 			regulator-boot-on;
 			regulator-always-on;
-			ti,vsel0-state-low;
-			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
-			ti,vsel1-state-low;
+
+			nvidia,tegra-core-regulator;
 		};
 	};
 
@@ -913,6 +932,7 @@
 		nvidia,core-pwr-off-time = <0>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 
 		/* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
 		i2c-thermtrip {
@@ -949,7 +969,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		asix@1 {
+		ethernet@1 {
+			compatible = "usbb95,772b";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00];
 		};
@@ -960,7 +981,7 @@
 		vbus-supply = <&reg_lan_v_bus>;
 	};
 
-	clk32k_in: xtal1 {
+	clk32k_in: clock-xtal1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
@@ -1041,12 +1062,3 @@
 					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
 };
-
-&gpio {
-	lan-reset-n {
-		gpio-hog;
-		gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LAN_RESET#";
-	};
-};
diff --git a/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi
index 1be715d2a442..b8e0e9117021 100644
--- a/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi
+++ b/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi
@@ -1,288 +1,288 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	cpu0_opp_table: cpu_opp_table0 {
-		opp@51000000,800 {
+	cpu0_opp_table: opp-table-cpu0 {
+		opp-51000000-800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@51000000,850 {
+		opp-51000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@51000000,912 {
+		opp-51000000-912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@102000000,800 {
+		opp-102000000-800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@102000000,850 {
+		opp-102000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@102000000,912 {
+		opp-102000000-912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@204000000,800 {
+		opp-204000000-800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@204000000,850 {
+		opp-204000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@204000000,912 {
+		opp-204000000-912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@312000000,850 {
+		opp-312000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@312000000,912 {
+		opp-312000000-912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@340000000,800 {
+		opp-340000000-800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@340000000,850 {
+		opp-340000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@370000000,800 {
+		opp-370000000-800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@456000000,850 {
+		opp-456000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@456000000,912 {
+		opp-456000000-912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@475000000,800 {
+		opp-475000000-800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@475000000,850 {
+		opp-475000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@608000000,850 {
+		opp-608000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@608000000,912 {
+		opp-608000000-912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@620000000,850 {
+		opp-620000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000,850 {
+		opp-640000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000,900 {
+		opp-640000000-900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000,850 {
+		opp-760000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@760000000,900 {
+		opp-760000000-900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000,912 {
+		opp-760000000-912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@760000000,975 {
+		opp-760000000-975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@816000000,850 {
+		opp-816000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@816000000,912 {
+		opp-816000000-912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@860000000,850 {
+		opp-860000000-850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@860000000,900 {
+		opp-860000000-900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000,975 {
+		opp-860000000-975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@860000000,1000 {
+		opp-860000000-1000 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@910000000,900 {
+		opp-910000000-900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@1000000000,900 {
+		opp-1000000000-900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@1000000000,975 {
+		opp-1000000000-975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000,1000 {
+		opp-1000000000-1000 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1000000000,1025 {
+		opp-1000000000-1025 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1100000000,900 {
+		opp-1100000000-900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@1100000000,975 {
+		opp-1100000000-975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1100000000,1000 {
+		opp-1100000000-1000 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1100000000,1025 {
+		opp-1100000000-1025 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1100000000,1075 {
+		opp-1100000000-1075 {
 			opp-microvolt = <1075000 1075000 1250000>;
 		};
 
-		opp@1150000000,975 {
+		opp-1150000000-975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1200000000,975 {
+		opp-1200000000-975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1200000000,1000 {
+		opp-1200000000-1000 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1200000000,1025 {
+		opp-1200000000-1025 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1200000000,1050 {
+		opp-1200000000-1050 {
 			opp-microvolt = <1050000 1050000 1250000>;
 		};
 
-		opp@1200000000,1075 {
+		opp-1200000000-1075 {
 			opp-microvolt = <1075000 1075000 1250000>;
 		};
 
-		opp@1200000000,1100 {
+		opp-1200000000-1100 {
 			opp-microvolt = <1100000 1100000 1250000>;
 		};
 
-		opp@1300000000,1000 {
+		opp-1300000000-1000 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1300000000,1025 {
+		opp-1300000000-1025 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1300000000,1050 {
+		opp-1300000000-1050 {
 			opp-microvolt = <1050000 1050000 1250000>;
 		};
 
-		opp@1300000000,1075 {
+		opp-1300000000-1075 {
 			opp-microvolt = <1075000 1075000 1250000>;
 		};
 
-		opp@1300000000,1100 {
+		opp-1300000000-1100 {
 			opp-microvolt = <1100000 1100000 1250000>;
 		};
 
-		opp@1300000000,1125 {
+		opp-1300000000-1125 {
 			opp-microvolt = <1125000 1125000 1250000>;
 		};
 
-		opp@1300000000,1150 {
+		opp-1300000000-1150 {
 			opp-microvolt = <1150000 1150000 1250000>;
 		};
 
-		opp@1300000000,1175 {
+		opp-1300000000-1175 {
 			opp-microvolt = <1175000 1175000 1250000>;
 		};
 
-		opp@1400000000,1100 {
+		opp-1400000000-1100 {
 			opp-microvolt = <1100000 1100000 1250000>;
 		};
 
-		opp@1400000000,1125 {
+		opp-1400000000-1125 {
 			opp-microvolt = <1125000 1125000 1250000>;
 		};
 
-		opp@1400000000,1150 {
+		opp-1400000000-1150 {
 			opp-microvolt = <1150000 1150000 1250000>;
 		};
 
-		opp@1400000000,1175 {
+		opp-1400000000-1175 {
 			opp-microvolt = <1175000 1175000 1250000>;
 		};
 
-		opp@1400000000,1237 {
+		opp-1400000000-1237 {
 			opp-microvolt = <1237000 1237000 1250000>;
 		};
 
-		opp@1500000000,1125 {
+		opp-1500000000-1125 {
 			opp-microvolt = <1125000 1125000 1250000>;
 		};
 
-		opp@1500000000,1150 {
+		opp-1500000000-1150 {
 			opp-microvolt = <1150000 1150000 1250000>;
 		};
 
-		opp@1500000000,1200 {
+		opp-1500000000-1200 {
 			opp-microvolt = <1200000 1200000 1250000>;
 		};
 
-		opp@1500000000,1237 {
+		opp-1500000000-1237 {
 			opp-microvolt = <1237000 1237000 1250000>;
 		};
 
-		opp@1600000000,1212 {
+		opp-1600000000-1212 {
 			opp-microvolt = <1212000 1212000 1250000>;
 		};
 
-		opp@1600000000,1237 {
+		opp-1600000000-1237 {
 			opp-microvolt = <1237000 1237000 1250000>;
 		};
 
-		opp@1700000000,1212 {
+		opp-1700000000-1212 {
 			opp-microvolt = <1212000 1212000 1250000>;
 		};
 
-		opp@1700000000,1237 {
+		opp-1700000000-1237 {
 			opp-microvolt = <1237000 1237000 1250000>;
 		};
 	};
diff --git a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi
index 0f7135006d19..5b9ebb75a09f 100644
--- a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi
+++ b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi
@@ -1,113 +1,116 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	cpu0_opp_table: cpu_opp_table0 {
+	cpu0_opp_table: opp-table-cpu0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@51000000,800 {
+		opp-51000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x31FE>;
 			opp-hz = /bits/ 64 <51000000>;
 		};
 
-		opp@51000000,850 {
+		opp-51000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C01>;
 			opp-hz = /bits/ 64 <51000000>;
 		};
 
-		opp@51000000,912 {
+		opp-51000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <51000000>;
 		};
 
-		opp@102000000,800 {
+		opp-102000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x31FE>;
 			opp-hz = /bits/ 64 <102000000>;
 		};
 
-		opp@102000000,850 {
+		opp-102000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C01>;
 			opp-hz = /bits/ 64 <102000000>;
 		};
 
-		opp@102000000,912 {
+		opp-102000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <102000000>;
 		};
 
-		opp@204000000,800 {
+		opp-204000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x31FE>;
 			opp-hz = /bits/ 64 <204000000>;
+			opp-suspend;
 		};
 
-		opp@204000000,850 {
+		opp-204000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C01>;
 			opp-hz = /bits/ 64 <204000000>;
+			opp-suspend;
 		};
 
-		opp@204000000,912 {
+		opp-204000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <204000000>;
+			opp-suspend;
 		};
 
-		opp@312000000,850 {
+		opp-312000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C00>;
 			opp-hz = /bits/ 64 <312000000>;
 		};
 
-		opp@312000000,912 {
+		opp-312000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <312000000>;
 		};
 
-		opp@340000000,800 {
+		opp-340000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0192>;
 			opp-hz = /bits/ 64 <340000000>;
 		};
 
-		opp@340000000,850 {
+		opp-340000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0F 0x0001>;
 			opp-hz = /bits/ 64 <340000000>;
 		};
 
-		opp@370000000,800 {
+		opp-370000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1E 0x306C>;
 			opp-hz = /bits/ 64 <370000000>;
 		};
 
-		opp@456000000,850 {
+		opp-456000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C00>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@456000000,912 {
+		opp-456000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@475000000,800 {
+		opp-475000000-800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1E 0x31FE>;
 			opp-hz = /bits/ 64 <475000000>;
 		};
 
-		opp@475000000,850 {
+		opp-475000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0F 0x0001>, <0x01 0x0002>,
 					   <0x01 0x0010>, <0x01 0x0080>,
@@ -115,25 +118,25 @@
 			opp-hz = /bits/ 64 <475000000>;
 		};
 
-		opp@608000000,850 {
+		opp-608000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0400>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000,912 {
+		opp-608000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@620000000,850 {
+		opp-620000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1E 0x306C>;
 			opp-hz = /bits/ 64 <620000000>;
 		};
 
-		opp@640000000,850 {
+		opp-640000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0F 0x0001>, <0x02 0x0002>,
 					   <0x04 0x0002>, <0x08 0x0002>,
@@ -146,13 +149,13 @@
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000,900 {
+		opp-640000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@760000000,850 {
+		opp-760000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1E 0x3461>, <0x08 0x0002>,
 					   <0x08 0x0004>, <0x08 0x0008>,
@@ -162,7 +165,7 @@
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,900 {
+		opp-760000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>, <0x02 0x0002>,
 					   <0x04 0x0002>, <0x02 0x0004>,
@@ -174,37 +177,37 @@
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,912 {
+		opp-760000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000,975 {
+		opp-760000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@816000000,850 {
+		opp-816000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0400>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000,912 {
+		opp-816000000-912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@860000000,850 {
+		opp-860000000-850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0C 0x0001>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000,900 {
+		opp-860000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0001>, <0x04 0x0002>,
 					   <0x08 0x0002>, <0x04 0x0004>,
@@ -217,7 +220,7 @@
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000,975 {
+		opp-860000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>, <0x02 0x0002>,
 					   <0x02 0x0004>, <0x02 0x0008>,
@@ -226,25 +229,25 @@
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000,1000 {
+		opp-860000000-1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@910000000,900 {
+		opp-910000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x18 0x3060>;
 			opp-hz = /bits/ 64 <910000000>;
 		};
 
-		opp@1000000000,900 {
+		opp-1000000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0C 0x0001>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,975 {
+		opp-1000000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x03 0x0001>, <0x04 0x0002>,
 					   <0x08 0x0002>, <0x04 0x0004>,
@@ -257,25 +260,25 @@
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,1000 {
+		opp-1000000000-1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x019E>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000,1025 {
+		opp-1000000000-1025 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1100000000,900 {
+		opp-1100000000-900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0001>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000,975 {
+		opp-1100000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x06 0x0001>, <0x08 0x0002>,
 					   <0x08 0x0004>, <0x08 0x0008>,
@@ -285,7 +288,7 @@
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000,1000 {
+		opp-1100000000-1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>, <0x04 0x0002>,
 					   <0x04 0x0004>, <0x04 0x0008>,
@@ -294,31 +297,31 @@
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000,1025 {
+		opp-1100000000-1025 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x019E>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000,1075 {
+		opp-1100000000-1075 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1150000000,975 {
+		opp-1150000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x18 0x3060>;
 			opp-hz = /bits/ 64 <1150000000>;
 		};
 
-		opp@1200000000,975 {
+		opp-1200000000-975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0001>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1000 {
+		opp-1200000000-1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0001>, <0x08 0x0002>,
 					   <0x08 0x0004>, <0x08 0x0008>,
@@ -328,7 +331,7 @@
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1025 {
+		opp-1200000000-1025 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0001>, <0x04 0x0002>,
 					   <0x04 0x0004>, <0x04 0x0008>,
@@ -337,39 +340,39 @@
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1050 {
+		opp-1200000000-1050 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x019E>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1075 {
+		opp-1200000000-1075 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000,1100 {
+		opp-1200000000-1100 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1300000000,1000 {
+		opp-1300000000-1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0001>, <0x10 0x0080>,
 					   <0x10 0x0100>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1025 {
+		opp-1300000000-1025 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0001>, <0x08 0x0002>,
 					   <0x08 0x0080>, <0x08 0x0100>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1050 {
+		opp-1300000000-1050 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x12 0x3061>, <0x04 0x0002>,
 					   <0x08 0x0004>, <0x08 0x0008>,
@@ -380,68 +383,68 @@
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1075 {
+		opp-1300000000-1075 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0182>, <0x04 0x0004>,
 					   <0x04 0x0008>, <0x04 0x0010>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1100 {
+		opp-1300000000-1100 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x001C>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1125 {
+		opp-1300000000-1125 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1150 {
+		opp-1300000000-1150 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0182>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000,1175 {
+		opp-1300000000-1175 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0010>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1400000000,1100 {
+		opp-1400000000-1100 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x18 0x307C>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000,1125 {
+		opp-1400000000-1125 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x000C>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000,1150 {
+		opp-1400000000-1150 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x000C>, <0x04 0x0010>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000,1175 {
+		opp-1400000000-1175 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0010>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000,1237 {
+		opp-1400000000-1237 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0010>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1500000000,1125 {
+		opp-1500000000-1125 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0010>, <0x10 0x0020>,
 					   <0x10 0x0040>, <0x10 0x1000>,
@@ -449,7 +452,7 @@
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000,1150 {
+		opp-1500000000-1150 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0010>, <0x08 0x0020>,
 					   <0x08 0x0040>, <0x08 0x1000>,
@@ -457,37 +460,37 @@
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000,1200 {
+		opp-1500000000-1200 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0010>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000,1237 {
+		opp-1500000000-1237 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0010>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1600000000,1212 {
+		opp-1600000000-1212 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x3060>;
 			opp-hz = /bits/ 64 <1600000000>;
 		};
 
-		opp@1600000000,1237 {
+		opp-1600000000-1237 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x3060>;
 			opp-hz = /bits/ 64 <1600000000>;
 		};
 
-		opp@1700000000,1212 {
+		opp-1700000000-1212 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x3060>;
 			opp-hz = /bits/ 64 <1700000000>;
 		};
 
-		opp@1700000000,1237 {
+		opp-1700000000-1237 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x3060>;
 			opp-hz = /bits/ 64 <1700000000>;
diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts
index 0368b3b816ef..eef27c82987b 100644
--- a/arch/arm/boot/dts/tegra30-ouya.dts
+++ b/arch/arm/boot/dts/tegra30-ouya.dts
@@ -26,6 +26,14 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <0x0>;
+			tlm,version-minor = <0x0>;
+		};
+	};
+
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
@@ -68,22 +76,1936 @@
 		};
 	};
 
-	gpio: gpio@6000d000 {
-		gpio-ranges = <&pinmux 0 0 248>;
-		#reset-cells = <1>;
-	};
-
 	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
+
 		state_default: pinmux {
-			/* located at $state_default below */
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_a18_pb1 {
+				nvidia,pins = "gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_pclk_pb3 {
+				nvidia,pins = "lcd_pclk_pb3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_pwr1_pc1 {
+				nvidia,pins = "lcd_pwr1_pc1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_dat5_pd0 {
+				nvidia,pins = "sdmmc3_dat5_pd0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc3_dat4_pd1 {
+				nvidia,pins = "sdmmc3_dat4_pd1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc3_dat6_pd3 {
+				nvidia,pins = "sdmmc3_dat6_pd3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc3_dat7_pd4 {
+				nvidia,pins = "sdmmc3_dat7_pd4";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d1_pd5 {
+				nvidia,pins = "vi_d1_pd5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_vsync_pd6 {
+				nvidia,pins = "vi_vsync_pd6";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_hsync_pd7 {
+				nvidia,pins = "vi_hsync_pd7";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_d0_pe0 {
+				nvidia,pins = "lcd_d0_pe0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d1_pe1 {
+				nvidia,pins = "lcd_d1_pe1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d2_pe2 {
+				nvidia,pins = "lcd_d2_pe2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d3_pe3 {
+				nvidia,pins = "lcd_d3_pe3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d4_pe4 {
+				nvidia,pins = "lcd_d4_pe4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d5_pe5 {
+				nvidia,pins = "lcd_d5_pe5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d6_pe6 {
+				nvidia,pins = "lcd_d6_pe6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d7_pe7 {
+				nvidia,pins = "lcd_d7_pe7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d8_pf0 {
+				nvidia,pins = "lcd_d8_pf0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d9_pf1 {
+				nvidia,pins = "lcd_d9_pf1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d10_pf2 {
+				nvidia,pins = "lcd_d10_pf2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d11_pf3 {
+				nvidia,pins = "lcd_d11_pf3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d12_pf4 {
+				nvidia,pins = "lcd_d12_pf4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d13_pf5 {
+				nvidia,pins = "lcd_d13_pf5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d14_pf6 {
+				nvidia,pins = "lcd_d14_pf6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d15_pf7 {
+				nvidia,pins = "lcd_d15_pf7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad1_pg1 {
+				nvidia,pins = "gmi_ad1_pg1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad3_pg3 {
+				nvidia,pins = "gmi_ad3_pg3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad4_pg4 {
+				nvidia,pins = "gmi_ad4_pg4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad5_pg5 {
+				nvidia,pins = "gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad6_pg6 {
+				nvidia,pins = "gmi_ad6_pg6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad7_pg7 {
+				nvidia,pins = "gmi_ad7_pg7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad8_ph0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad11_ph3 {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad14_ph6 {
+				nvidia,pins = "gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_wr_n_pi0 {
+				nvidia,pins = "gmi_wr_n_pi0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_oe_n_pi1 {
+				nvidia,pins = "gmi_oe_n_pi1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_dqs_pi2 {
+				nvidia,pins = "gmi_dqs_pi2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs7_n_pi6 {
+				nvidia,pins = "gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_wait_pi7 {
+				nvidia,pins = "gmi_wait_pi7";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_de_pj1 {
+				nvidia,pins = "lcd_de_pj1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs1_n_pj2 {
+				nvidia,pins = "gmi_cs1_n_pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_hsync_pj3 {
+				nvidia,pins = "lcd_hsync_pj3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_vsync_pj4 {
+				nvidia,pins = "lcd_vsync_pj4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_adv_n_pk0 {
+				nvidia,pins = "gmi_adv_n_pk0";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_clk_pk1 {
+				nvidia,pins = "gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs2_n_pk3 {
+				nvidia,pins = "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs3_n_pk4 {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a19_pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d2_pl0 {
+				nvidia,pins = "vi_d2_pl0";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d3_pl1 {
+				nvidia,pins = "vi_d3_pl1";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d4_pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d5_pl3 {
+				nvidia,pins = "vi_d5_pl3";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d6_pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d7_pl5 {
+				nvidia,pins = "vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d8_pl6 {
+				nvidia,pins = "vi_d8_pl6";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d9_pl7 {
+				nvidia,pins = "vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d16_pm0 {
+				nvidia,pins = "lcd_d16_pm0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d17_pm1 {
+				nvidia,pins = "lcd_d17_pm1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d18_pm2 {
+				nvidia,pins = "lcd_d18_pm2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d19_pm3 {
+				nvidia,pins = "lcd_d19_pm3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d20_pm4 {
+				nvidia,pins = "lcd_d20_pm4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d21_pm5 {
+				nvidia,pins = "lcd_d21_pm5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d22_pm6 {
+				nvidia,pins = "lcd_d22_pm6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_d23_pm7 {
+				nvidia,pins = "lcd_d23_pm7";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap1_sclk_pn3 {
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_cs0_n_pn4 {
+				nvidia,pins = "lcd_cs0_n_pn4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_sdout_pn5 {
+				nvidia,pins = "lcd_sdout_pn5";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_dc0_pn6 {
+				nvidia,pins = "lcd_dc0_pn6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data2_po3 {
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data6_po7 {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_sclk_pp7 {
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row5_pr5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row12_ps4 {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_pclk_pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_mclk_pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d10_pt2 {
+				nvidia,pins = "vi_d10_pt2";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d11_pt3 {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d0_pt4 {
+				nvidia,pins = "vi_d0_pt4";
+				nvidia,function = "ddr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			jtag_rtck_pu7 {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "clk_12m_out";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_vsync_pv7 {
+				nvidia,pins = "crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_cs1_n_pw0 {
+				nvidia,pins = "lcd_cs1_n_pw0";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_m1_pw1 {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_sck_px2 {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_cs0_n_px6 {
+				nvidia,pins = "spi1_cs0_n_px6";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_sdin_pz2 {
+				nvidia,pins = "lcd_sdin_pz2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_wr_n_pz3 {
+				nvidia,pins = "lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			lcd_sck_pz4 {
+				nvidia,pins = "lcd_sck_pz4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_rst_n_pcc3 {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,io-reset = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_rst_n_pcc6 {
+				nvidia,pins = "pex_l2_rst_n_pcc6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_clkreq_n_pcc7 {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l0_prsnt_n_pdd0 {
+				nvidia,pins = "pex_l0_prsnt_n_pdd0";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l1_prsnt_n_pdd4 {
+				nvidia,pins = "pex_l1_prsnt_n_pdd4";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_prsnt_n_pdd7 {
+				nvidia,pins = "pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			drive_groups {
+				nvidia,pins = "drive_gma",
+					      "drive_gmb",
+					      "drive_gmc",
+					      "drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
 		};
 	};
 
 	uartc: serial@70006200 {
-		status = "okay";
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
 
 		nvidia,adjust-baud-rates = <0 9600 100>,
 					   <9600 115200 200>,
@@ -93,6 +2015,10 @@
 		bluetooth {
 			compatible = "brcm,bcm4330-bt";
 
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
 			max-speed = <4000000>;
 
 			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
@@ -103,7 +2029,6 @@
 
 			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
 			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
-			host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -120,18 +2045,6 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		cpu_temp: nct1008@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-			vcc-supply = <&sys_3v3_reg>;
-			#thermal-sensor-cells = <1>;
-/*
- *			The interrupt is bugged, once triggered it never clears.
- *			interrupt-parent = <&gpio>;
- *			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
- */
-		};
-
 		pmic: pmic@2d {
 			compatible = "ti,tps65911";
 			reg = <0x2d>;
@@ -139,6 +2052,7 @@
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
+			wakeup-source;
 
 			ti,en-gpio-sleep = <0 1 1 1 1 1 0 0 1>;
 			ti,system-power-controller;
@@ -244,6 +2158,17 @@
 			};
 		};
 
+		cpu_temp: nct1008@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&sys_3v3_reg>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+
 		vdd_core: tps62361@60 {
 			compatible = "ti,tps62361";
 			reg = <0x60>;
@@ -274,29 +2199,2298 @@
 		nvidia,core-pwr-off-time = <458>;
 		nvidia,core-power-req-active-high;
 		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
 	};
 
-	mc_timings: memory-controller@7000f000 {
-		/* timings located at &mc_timings below */
-	};
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			nvidia,ram-code = <0>; /* Samsung RAM */
 
-	emc_timings: memory-controller@7000f400 {
-		/* timings located at &emc_timings below */
-	};
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emem-configuration = <
+					0x00030003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75830303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
 
-	hda@70030000 {
-		status = "okay";
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emem-configuration = <
+					0x00010003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74630303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emem-configuration = <
+					0x00000006 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emem-configuration = <
+					0x0000000c /* MC_EMEM_ARB_CFG */
+					0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7086120a /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emem-configuration = <
+					0x00000018 /* MC_EMEM_ARB_CFG */
+					0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x712c2414 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			nvidia,ram-code = <1>; /* Hynix M RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emem-configuration = <
+					0x00030003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75830303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emem-configuration = <
+					0x00010003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74630303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x73c30504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emem-configuration = <
+					0x00000006 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x73840a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emem-configuration = <
+					0x0000000c /* MC_EMEM_ARB_CFG */
+					0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7086120a /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emem-configuration = <
+					0x00000018 /* MC_EMEM_ARB_CFG */
+					0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x712c2414 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-2 {
+			nvidia,ram-code = <2>; /* Hynix A RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emem-configuration = <
+					0x00030003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x75e30303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emem-configuration = <
+					0x00010003 /* MC_EMEM_ARB_CFG */
+					0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74e30303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x74430504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emem-configuration = <
+					0x00000006 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x74040a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emem-configuration = <
+					0x0000000c /* MC_EMEM_ARB_CFG */
+					0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000009 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
+					0x7086120a /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emem-configuration = <
+					0x00000018 /* MC_EMEM_ARB_CFG */
+					0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000013 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
+					0x712c2414 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			nvidia,ram-code = <0>;  /* Samsung RAM */
 
-		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
-		clock-names = "ext_clock";
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000006 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000007 /* EMC_TXSR */
+					0x00000007 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
 
-		reset-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_LOW>;
-		post-power-on-delay-ms = <300>;
-		power-off-delay-us = <300>;
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x0000000d /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000000e /* EMC_TXSR */
+					0x0000000e /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x0000001a /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000001c /* EMC_TXSR */
+					0x0000001c /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x00000035 /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000038 /* EMC_TXSR */
+					0x00000038 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-configuration = <
+					0x00000012 /* EMC_RC */
+					0x00000066 /* EMC_RFC */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x00000bf0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000008 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000006c /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000010 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c30 /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x001d0084 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS4 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS5 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS6 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0158000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-configuration = <
+					0x00000025 /* EMC_RC */
+					0x000000ce /* EMC_RFC */
+					0x0000001a /* EMC_RAS */
+					0x00000009 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x00000009 /* EMC_RD_RCD */
+					0x00000009 /* EMC_WR_RCD */
+					0x00000004 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001820 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000012 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000f /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x000000d8 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000020 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000007 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001860 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf0070191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000800a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000a /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00f0000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			nvidia,ram-code = <1>;  /* Hynix M RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000006 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000007 /* EMC_TXSR */
+					0x00000007 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x0000000d /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000000e /* EMC_TXSR */
+					0x0000000e /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x0000001a /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000001c /* EMC_TXSR */
+					0x0000001c /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x00000035 /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000038 /* EMC_TXSR */
+					0x00000038 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-configuration = <
+					0x00000012 /* EMC_RC */
+					0x00000066 /* EMC_RFC */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x00000bf0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000008 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000006c /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000010 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c30 /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x001d0084 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS4 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS5 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS6 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0158000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-configuration = <
+					0x00000025 /* EMC_RC */
+					0x000000ce /* EMC_RFC */
+					0x0000001a /* EMC_RAS */
+					0x00000009 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x00000009 /* EMC_RD_RCD */
+					0x00000009 /* EMC_WR_RCD */
+					0x00000004 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001820 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000012 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000f /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x000000d8 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000020 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000007 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001860 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf0070191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000800a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000a /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00f0000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+
+		emc-timings-2 {
+			nvidia,ram-code = <2>;  /* Hynix A RAM */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000007 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000008 /* EMC_TXSR */
+					0x00000008 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x0000000f /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000010 /* EMC_TXSR */
+					0x00000010 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000003 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000004 /* EMC_RC */
+					0x0000001e /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000020 /* EMC_TXSR */
+					0x00000020 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-configuration = <
+					0x00000009 /* EMC_RC */
+					0x0000003d /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000040 /* EMC_TXSR */
+					0x00000040 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000009 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000521>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-configuration = <
+					0x00000012 /* EMC_RC */
+					0x00000076 /* EMC_RFC */
+					0x0000000c /* EMC_RAS */
+					0x00000004 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x0000000a /* EMC_W2P */
+					0x00000004 /* EMC_RD_RCD */
+					0x00000004 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x00000bf0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000008 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x0000007c /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000010 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000c30 /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x001d0084 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00044000 /* EMC_DLL_XFORM_DQS0 */
+					0x00044000 /* EMC_DLL_XFORM_DQS1 */
+					0x00044000 /* EMC_DLL_XFORM_DQS2 */
+					0x00044000 /* EMC_DLL_XFORM_DQS3 */
+					0x00044000 /* EMC_DLL_XFORM_DQS4 */
+					0x00044000 /* EMC_DLL_XFORM_DQS5 */
+					0x00044000 /* EMC_DLL_XFORM_DQS6 */
+					0x00044000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00058000 /* EMC_DLL_XFORM_DQ0 */
+					0x00058000 /* EMC_DLL_XFORM_DQ1 */
+					0x00058000 /* EMC_DLL_XFORM_DQ2 */
+					0x00058000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0148000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-800000000 {
+				clock-frequency = <800000000>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000d71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+				nvidia,emc-configuration = <
+					0x00000025 /* EMC_RC */
+					0x000000ee /* EMC_RFC */
+					0x0000001a /* EMC_RAS */
+					0x00000009 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000d /* EMC_W2R */
+					0x00000004 /* EMC_R2P */
+					0x00000013 /* EMC_W2P */
+					0x00000009 /* EMC_RD_RCD */
+					0x00000009 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001820 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000003 /* EMC_PDEX2WR */
+					0x00000012 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000f /* EMC_AR2PDEN */
+					0x00000018 /* EMC_RW2PDEN */
+					0x000000f8 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000020 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000007 /* EMC_TCLKSTABLE */
+					0x00000008 /* EMC_TCLKSTOP */
+					0x00001860 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf0070191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000c /* EMC_DLL_XFORM_DQS0 */
+					0x007fc00a /* EMC_DLL_XFORM_DQS1 */
+					0x00000008 /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000c /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x0a000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x00d0000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
 	};
 
 	sdmmc3: mmc@78000400 {
@@ -356,7 +4550,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		smsc@2 { /* SMSC 10/100T Ethernet Controller */
+		ethernet@2 { /* SMSC 10/100T Ethernet Controller */
 			compatible = "usb424,9e00";
 			reg = <2>;
 			local-mac-address = [00 11 22 33 44 55];
@@ -391,31 +4585,27 @@
 			cpu-supply = <&vdd_cpu>;
 			#cooling-cells = <2>;
 		};
-		cpu@1 {
+
+		cpu1: cpu@1 {
 			operating-points-v2 = <&cpu0_opp_table>;
 			cpu-supply = <&vdd_cpu>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			operating-points-v2 = <&cpu0_opp_table>;
 			cpu-supply = <&vdd_cpu>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			operating-points-v2 = <&cpu0_opp_table>;
 			cpu-supply = <&vdd_cpu>;
+			#cooling-cells = <2>;
 		};
 	};
 
-	firmware {
-		trusted-foundations {
-			compatible = "tlm,trusted-foundations";
-			tlm,version-major = <0x0>;
-			tlm,version-minor = <0x0>;
-		};
-	};
-
-	fan: gpio_fan {
+	fan: fan {
 		compatible = "gpio-fan";
 		gpios = <&gpio TEGRA_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0    0
@@ -423,45 +4613,50 @@
 		#cooling-cells = <2>;
 	};
 
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay = <5000>;
-			polling-delay-passive = <5000>;
+	gpio-keys {
+		compatible = "gpio-keys";
 
-			thermal-sensors = <&cpu_temp 1>;
+		key-power {
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			debounce-interval = <10>;
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
 
-			trips {
-				cpu_alert0: cpu-alert0 {
-					temperature = <50000>;
-					hysteresis = <10000>;
-					type = "active";
-				};
-				cpu_alert1: cpu-alert1 {
-					temperature = <70000>;
-					hysteresis = <5000>;
-					type = "passive";
-				};
-				cpu_crit: cpu-crit {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
+	leds {
+		compatible = "gpio-leds";
 
-			cooling-maps {
-				map0 {
-					trip = <&cpu_alert0>;
-					cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-				map1 {
-					trip = <&cpu_alert1>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
+		led-power {
+			label = "power-led";
+			gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+			retain-state-suspended;
 		};
 	};
 
-	vdd_12v_in: vdd_12v_in {
+	opp-table-actmon {
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-900000000-1350;
+	};
+
+	wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	vdd_12v_in: regulator-vdd-12v-in {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_12v_in";
 		regulator-min-microvolt = <12000000>;
@@ -469,7 +4664,7 @@
 		regulator-always-on;
 	};
 
-	sdmmc_3v3_reg: sdmmc_3v3_reg {
+	sdmmc_3v3_reg: regulator-sdmmc-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "sdmmc_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -480,7 +4675,7 @@
 		vin-supply = <&sys_3v3_reg>;
 	};
 
-	vdd_fuse_3v3_reg: vdd_fuse_3v3_reg {
+	vdd_fuse_3v3_reg: regulator-vdd-fuse-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_fuse_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -491,7 +4686,7 @@
 		regulator-always-on;
 	};
 
-	vdd_vid_reg: vdd_vid_reg {
+	vdd_vid_reg: regulator-vdd-vid {
 		compatible = "regulator-fixed";
 		regulator-name = "vddio_vid";
 		regulator-min-microvolt = <5000000>;
@@ -502,7 +4697,7 @@
 		regulator-boot-on;
 	};
 
-	ddr_reg: ddr_reg {
+	ddr_reg: regulator-ddr {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_ddr";
 		regulator-min-microvolt = <1500000>;
@@ -514,7 +4709,7 @@
 		vin-supply = <&vdd_12v_in>;
 	};
 
-	sys_3v3_reg: sys_3v3_reg {
+	sys_3v3_reg: regulator-sys-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "sys_3v3";
 		regulator-min-microvolt = <3300000>;
@@ -526,7 +4721,7 @@
 		vin-supply = <&vdd_12v_in>;
 	};
 
-	vdd_5v0_reg: vdd_5v0_reg {
+	vdd_5v0_reg: regulator-vdd-5v0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_5v0";
 		regulator-min-microvolt = <5000000>;
@@ -538,14 +4733,14 @@
 		vin-supply = <&vdd_12v_in>;
 	};
 
-	vdd_smsc: vdd_smsc {
+	vdd_smsc: regulator-vdd-smsc {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_smsc";
 		enable-active-high;
 		gpio = <&gpio TEGRA_GPIO(DD, 5) GPIO_ACTIVE_HIGH>;
 	};
 
-	usb3_vbus_reg: usb3_vbus_reg {
+	usb3_vbus_reg: regulator-usb3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3_vbus";
 		regulator-min-microvolt = <5000000>;
@@ -555,3965 +4750,46 @@
 		vin-supply = <&vdd_5v0_reg>;
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
-			debounce-interval = <10>;
-			linux,code = <KEY_POWER>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-	};
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay = <5000>;
+			polling-delay-passive = <5000>;
 
+			thermal-sensors = <&cpu_temp 1>;
 
-	leds {
-		compatible = "gpio-leds";
+			trips {
+				cpu_alert0: cpu-alert0 {
+					temperature = <50000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				cpu_alert1: cpu-alert1 {
+					temperature = <70000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 
-		led-power {
-			label = "power-led";
-			gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-			retain-state-suspended;
-		};
-	};
-};
-&mc_timings {
-	emc-timings-0 {
-		nvidia,ram-code = <0>; /* Samsung RAM */
-		timing-25500000 {
-			clock-frequency = <25500000>;
-			nvidia,emem-configuration = <
-				0x00030003 /* MC_EMEM_ARB_CFG */
-				0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-				0x75830303 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-51000000 {
-			clock-frequency = <51000000>;
-			nvidia,emem-configuration = <
-				0x00010003 /* MC_EMEM_ARB_CFG */
-				0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-				0x74630303 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-102000000 {
-			clock-frequency = <102000000>;
-			nvidia,emem-configuration = <
-				0x00000003 /* MC_EMEM_ARB_CFG */
-				0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
-				0x73c30504 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-204000000 {
-			clock-frequency = <204000000>;
-			nvidia,emem-configuration = <
-				0x00000006 /* MC_EMEM_ARB_CFG */
-				0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
-				0x73840a06 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-400000000 {
-			clock-frequency = <400000000>;
-			nvidia,emem-configuration = <
-				0x0000000c /* MC_EMEM_ARB_CFG */
-				0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000009 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06030202 /* MC_EMEM_ARB_DA_TURNS */
-				0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
-				0x7086120a /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-800000000 {
-			clock-frequency = <800000000>;
-			nvidia,emem-configuration = <
-				0x00000018 /* MC_EMEM_ARB_CFG */
-				0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000013 /* MC_EMEM_ARB_TIMING_RC */
-				0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
-				0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
-				0x08040202 /* MC_EMEM_ARB_DA_TURNS */
-				0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
-				0x712c2414 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-	};
-	emc-timings-1 {
-		nvidia,ram-code = <1>; /* Hynix M RAM */
-		timing-25500000 {
-			clock-frequency = <25500000>;
-			nvidia,emem-configuration = <
-				0x00030003 /* MC_EMEM_ARB_CFG */
-				0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-				0x75830303 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-51000000 {
-			clock-frequency = <51000000>;
-			nvidia,emem-configuration = <
-				0x00010003 /* MC_EMEM_ARB_CFG */
-				0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-				0x74630303 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-102000000 {
-			clock-frequency = <102000000>;
-			nvidia,emem-configuration = <
-				0x00000003 /* MC_EMEM_ARB_CFG */
-				0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
-				0x73c30504 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-204000000 {
-			clock-frequency = <204000000>;
-			nvidia,emem-configuration = <
-				0x00000006 /* MC_EMEM_ARB_CFG */
-				0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
-				0x73840a06 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-400000000 {
-			clock-frequency = <400000000>;
-			nvidia,emem-configuration = <
-				0x0000000c /* MC_EMEM_ARB_CFG */
-				0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000009 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06030202 /* MC_EMEM_ARB_DA_TURNS */
-				0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
-				0x7086120a /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-800000000 {
-			clock-frequency = <800000000>;
-			nvidia,emem-configuration = <
-				0x00000018 /* MC_EMEM_ARB_CFG */
-				0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000013 /* MC_EMEM_ARB_TIMING_RC */
-				0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
-				0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
-				0x08040202 /* MC_EMEM_ARB_DA_TURNS */
-				0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
-				0x712c2414 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-	};
-	emc-timings-2 {
-		nvidia,ram-code = <2>; /* Hynix A RAM */
-		timing-25500000 {
-			clock-frequency = <25500000>;
-			nvidia,emem-configuration = <
-				0x00030003 /* MC_EMEM_ARB_CFG */
-				0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-				0x75e30303 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-51000000 {
-			clock-frequency = <51000000>;
-			nvidia,emem-configuration = <
-				0x00010003 /* MC_EMEM_ARB_CFG */
-				0xc0000010 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
-				0x74e30303 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-102000000 {
-			clock-frequency = <102000000>;
-			nvidia,emem-configuration = <
-				0x00000003 /* MC_EMEM_ARB_CFG */
-				0xc0000018 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
-				0x74430504 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-204000000 {
-			clock-frequency = <204000000>;
-			nvidia,emem-configuration = <
-				0x00000006 /* MC_EMEM_ARB_CFG */
-				0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06020102 /* MC_EMEM_ARB_DA_TURNS */
-				0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
-				0x74040a06 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-400000000 {
-			clock-frequency = <400000000>;
-			nvidia,emem-configuration = <
-				0x0000000c /* MC_EMEM_ARB_CFG */
-				0xc0000048 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000009 /* MC_EMEM_ARB_TIMING_RC */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RAS */
-				0x00000007 /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
-				0x06030202 /* MC_EMEM_ARB_DA_TURNS */
-				0x000d0709 /* MC_EMEM_ARB_DA_COVERS */
-				0x7086120a /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-		timing-800000000 {
-			clock-frequency = <800000000>;
-			nvidia,emem-configuration = <
-				0x00000018 /* MC_EMEM_ARB_CFG */
-				0xc0000090 /* MC_EMEM_ARB_OUTSTANDING_REQ */
-				0x00000004 /* MC_EMEM_ARB_TIMING_RCD */
-				0x00000005 /* MC_EMEM_ARB_TIMING_RP */
-				0x00000013 /* MC_EMEM_ARB_TIMING_RC */
-				0x0000000c /* MC_EMEM_ARB_TIMING_RAS */
-				0x0000000f /* MC_EMEM_ARB_TIMING_FAW */
-				0x00000002 /* MC_EMEM_ARB_TIMING_RRD */
-				0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
-				0x0000000c /* MC_EMEM_ARB_TIMING_WAP2PRE */
-				0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
-				0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
-				0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
-				0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
-				0x08040202 /* MC_EMEM_ARB_DA_TURNS */
-				0x00160d13 /* MC_EMEM_ARB_DA_COVERS */
-				0x712c2414 /* MC_EMEM_ARB_MISC0 */
-				0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
-			>;
-		};
-	};
-};
-&emc_timings {
-	emc-timings-0 {
-		nvidia,ram-code = <0>;  /* Samsung RAM */
-		timing-25500000 {
-			clock-frequency = <25500000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000001 /* EMC_RC */
-				0x00000006 /* EMC_RFC */
-				0x00000000 /* EMC_RAS */
-				0x00000000 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000000 /* EMC_RD_RCD */
-				0x00000000 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x000000c0 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x00000007 /* EMC_TXSR */
-				0x00000007 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000002 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x000000c7 /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-51000000 {
-			clock-frequency = <51000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000002 /* EMC_RC */
-				0x0000000d /* EMC_RFC */
-				0x00000001 /* EMC_RAS */
-				0x00000000 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000000 /* EMC_RD_RCD */
-				0x00000000 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000181 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x0000000e /* EMC_TXSR */
-				0x0000000e /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000003 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x0000018e /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-102000000 {
-			clock-frequency = <102000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000004 /* EMC_RC */
-				0x0000001a /* EMC_RFC */
-				0x00000003 /* EMC_RAS */
-				0x00000001 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000001 /* EMC_RD_RCD */
-				0x00000001 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000303 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x0000001c /* EMC_TXSR */
-				0x0000001c /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000005 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x0000031c /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-204000000 {
-			clock-frequency = <204000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000009 /* EMC_RC */
-				0x00000035 /* EMC_RFC */
-				0x00000007 /* EMC_RAS */
-				0x00000002 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000002 /* EMC_RD_RCD */
-				0x00000002 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000607 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x00000038 /* EMC_TXSR */
-				0x00000038 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000009 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x00000638 /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000006 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x004400a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x00080000 /* EMC_DLL_XFORM_DQS0 */
-				0x00080000 /* EMC_DLL_XFORM_DQS1 */
-				0x00080000 /* EMC_DLL_XFORM_DQS2 */
-				0x00080000 /* EMC_DLL_XFORM_DQS3 */
-				0x00080000 /* EMC_DLL_XFORM_DQS4 */
-				0x00080000 /* EMC_DLL_XFORM_DQS5 */
-				0x00080000 /* EMC_DLL_XFORM_DQS6 */
-				0x00080000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x00080000 /* EMC_DLL_XFORM_DQ0 */
-				0x00080000 /* EMC_DLL_XFORM_DQ1 */
-				0x00080000 /* EMC_DLL_XFORM_DQ2 */
-				0x00080000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-400000000 {
-			clock-frequency = <400000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100002>;
-			nvidia,emc-mode-2 = <0x80200000>;
-			nvidia,emc-mode-reset = <0x80000521>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-configuration = <
-				0x00000012 /* EMC_RC */
-				0x00000066 /* EMC_RFC */
-				0x0000000c /* EMC_RAS */
-				0x00000004 /* EMC_RP */
-				0x00000003 /* EMC_R2W */
-				0x00000008 /* EMC_W2R */
-				0x00000002 /* EMC_R2P */
-				0x0000000a /* EMC_W2P */
-				0x00000004 /* EMC_RD_RCD */
-				0x00000004 /* EMC_WR_RCD */
-				0x00000002 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000004 /* EMC_WDV */
-				0x00000006 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000c /* EMC_RDV */
-				0x00000bf0 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000001 /* EMC_PDEX2WR */
-				0x00000008 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000008 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x0000006c /* EMC_TXSR */
-				0x00000200 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000010 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x00000c30 /* EMC_TREFBW */
-				0x00000000 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00007088 /* EMC_FBIO_CFG5 */
-				0x001d0084 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x0003c000 /* EMC_DLL_XFORM_DQS0 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS1 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS2 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS3 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS4 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS5 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS6 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x00048000 /* EMC_DLL_XFORM_DQ0 */
-				0x00048000 /* EMC_DLL_XFORM_DQ1 */
-				0x00048000 /* EMC_DLL_XFORM_DQ2 */
-				0x00048000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800013d /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f508 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x080001e8 /* EMC_XM2QUSEPADCTRL */
-				0x08000021 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x0158000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff89 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-800000000 {
-			clock-frequency = <800000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100002>;
-			nvidia,emc-mode-2 = <0x80200018>;
-			nvidia,emc-mode-reset = <0x80000d71>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-configuration = <
-				0x00000025 /* EMC_RC */
-				0x000000ce /* EMC_RFC */
-				0x0000001a /* EMC_RAS */
-				0x00000009 /* EMC_RP */
-				0x00000005 /* EMC_R2W */
-				0x0000000d /* EMC_W2R */
-				0x00000004 /* EMC_R2P */
-				0x00000013 /* EMC_W2P */
-				0x00000009 /* EMC_RD_RCD */
-				0x00000009 /* EMC_WR_RCD */
-				0x00000004 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000007 /* EMC_WDV */
-				0x0000000a /* EMC_QUSE */
-				0x00000009 /* EMC_QRST */
-				0x0000000b /* EMC_QSAFE */
-				0x00000011 /* EMC_RDV */
-				0x00001820 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000003 /* EMC_PDEX2WR */
-				0x00000012 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x0000000f /* EMC_AR2PDEN */
-				0x00000018 /* EMC_RW2PDEN */
-				0x000000d8 /* EMC_TXSR */
-				0x00000200 /* EMC_TXSRDLL */
-				0x00000005 /* EMC_TCKE */
-				0x00000020 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000007 /* EMC_TCLKSTABLE */
-				0x00000008 /* EMC_TCLKSTOP */
-				0x00001860 /* EMC_TREFBW */
-				0x0000000b /* EMC_QUSE_EXTRA */
-				0x00000006 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00005088 /* EMC_FBIO_CFG5 */
-				0xf0070191 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x0000800a /* EMC_DLL_XFORM_DQS0 */
-				0x0000000a /* EMC_DLL_XFORM_DQS1 */
-				0x0000000a /* EMC_DLL_XFORM_DQS2 */
-				0x0000000a /* EMC_DLL_XFORM_DQS3 */
-				0x0000000a /* EMC_DLL_XFORM_DQS4 */
-				0x0000000a /* EMC_DLL_XFORM_DQS5 */
-				0x0000000a /* EMC_DLL_XFORM_DQS6 */
-				0x0000000a /* EMC_DLL_XFORM_DQS7 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x0000000a /* EMC_DLL_XFORM_DQ0 */
-				0x0000000a /* EMC_DLL_XFORM_DQ1 */
-				0x0000000a /* EMC_DLL_XFORM_DQ2 */
-				0x0000000a /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0600013d /* EMC_XM2DQSPADCTRL2 */
-				0x22220000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f501 /* EMC_XM2COMPPADCTRL */
-				0x07077404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
-				0x080001e8 /* EMC_XM2QUSEPADCTRL */
-				0x08000021 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x00f0000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff49 /* EMC_CFG_RSV */
-			>;
-		};
-	};
-	emc-timings-1 {
-		nvidia,ram-code = <1>;  /* Hynix M RAM */
-		timing-25500000 {
-			clock-frequency = <25500000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000001 /* EMC_RC */
-				0x00000006 /* EMC_RFC */
-				0x00000000 /* EMC_RAS */
-				0x00000000 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000000 /* EMC_RD_RCD */
-				0x00000000 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x000000c0 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x00000007 /* EMC_TXSR */
-				0x00000007 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000002 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x000000c7 /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-51000000 {
-			clock-frequency = <51000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000002 /* EMC_RC */
-				0x0000000d /* EMC_RFC */
-				0x00000001 /* EMC_RAS */
-				0x00000000 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000000 /* EMC_RD_RCD */
-				0x00000000 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000181 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x0000000e /* EMC_TXSR */
-				0x0000000e /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000003 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x0000018e /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-102000000 {
-			clock-frequency = <102000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000004 /* EMC_RC */
-				0x0000001a /* EMC_RFC */
-				0x00000003 /* EMC_RAS */
-				0x00000001 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000001 /* EMC_RD_RCD */
-				0x00000001 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000303 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x0000001c /* EMC_TXSR */
-				0x0000001c /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000005 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x0000031c /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-204000000 {
-			clock-frequency = <204000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000009 /* EMC_RC */
-				0x00000035 /* EMC_RFC */
-				0x00000007 /* EMC_RAS */
-				0x00000002 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000002 /* EMC_RD_RCD */
-				0x00000002 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000607 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x00000038 /* EMC_TXSR */
-				0x00000038 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000009 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x00000638 /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000006 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x004400a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x00080000 /* EMC_DLL_XFORM_DQS0 */
-				0x00080000 /* EMC_DLL_XFORM_DQS1 */
-				0x00080000 /* EMC_DLL_XFORM_DQS2 */
-				0x00080000 /* EMC_DLL_XFORM_DQS3 */
-				0x00080000 /* EMC_DLL_XFORM_DQS4 */
-				0x00080000 /* EMC_DLL_XFORM_DQS5 */
-				0x00080000 /* EMC_DLL_XFORM_DQS6 */
-				0x00080000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x00080000 /* EMC_DLL_XFORM_DQ0 */
-				0x00080000 /* EMC_DLL_XFORM_DQ1 */
-				0x00080000 /* EMC_DLL_XFORM_DQ2 */
-				0x00080000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-400000000 {
-			clock-frequency = <400000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100002>;
-			nvidia,emc-mode-2 = <0x80200000>;
-			nvidia,emc-mode-reset = <0x80000521>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-configuration = <
-				0x00000012 /* EMC_RC */
-				0x00000066 /* EMC_RFC */
-				0x0000000c /* EMC_RAS */
-				0x00000004 /* EMC_RP */
-				0x00000003 /* EMC_R2W */
-				0x00000008 /* EMC_W2R */
-				0x00000002 /* EMC_R2P */
-				0x0000000a /* EMC_W2P */
-				0x00000004 /* EMC_RD_RCD */
-				0x00000004 /* EMC_WR_RCD */
-				0x00000002 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000004 /* EMC_WDV */
-				0x00000006 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000c /* EMC_RDV */
-				0x00000bf0 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000001 /* EMC_PDEX2WR */
-				0x00000008 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000008 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x0000006c /* EMC_TXSR */
-				0x00000200 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000010 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x00000c30 /* EMC_TREFBW */
-				0x00000000 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00007088 /* EMC_FBIO_CFG5 */
-				0x001d0084 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x0003c000 /* EMC_DLL_XFORM_DQS0 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS1 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS2 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS3 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS4 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS5 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS6 */
-				0x0003c000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x00048000 /* EMC_DLL_XFORM_DQ0 */
-				0x00048000 /* EMC_DLL_XFORM_DQ1 */
-				0x00048000 /* EMC_DLL_XFORM_DQ2 */
-				0x00048000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800013d /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f508 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x080001e8 /* EMC_XM2QUSEPADCTRL */
-				0x08000021 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x0158000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff89 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-800000000 {
-			clock-frequency = <800000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100002>;
-			nvidia,emc-mode-2 = <0x80200018>;
-			nvidia,emc-mode-reset = <0x80000d71>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-configuration = <
-				0x00000025 /* EMC_RC */
-				0x000000ce /* EMC_RFC */
-				0x0000001a /* EMC_RAS */
-				0x00000009 /* EMC_RP */
-				0x00000005 /* EMC_R2W */
-				0x0000000d /* EMC_W2R */
-				0x00000004 /* EMC_R2P */
-				0x00000013 /* EMC_W2P */
-				0x00000009 /* EMC_RD_RCD */
-				0x00000009 /* EMC_WR_RCD */
-				0x00000004 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000007 /* EMC_WDV */
-				0x0000000a /* EMC_QUSE */
-				0x00000009 /* EMC_QRST */
-				0x0000000b /* EMC_QSAFE */
-				0x00000011 /* EMC_RDV */
-				0x00001820 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000003 /* EMC_PDEX2WR */
-				0x00000012 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x0000000f /* EMC_AR2PDEN */
-				0x00000018 /* EMC_RW2PDEN */
-				0x000000d8 /* EMC_TXSR */
-				0x00000200 /* EMC_TXSRDLL */
-				0x00000005 /* EMC_TCKE */
-				0x00000020 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000007 /* EMC_TCLKSTABLE */
-				0x00000008 /* EMC_TCLKSTOP */
-				0x00001860 /* EMC_TREFBW */
-				0x0000000b /* EMC_QUSE_EXTRA */
-				0x00000006 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00005088 /* EMC_FBIO_CFG5 */
-				0xf0070191 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x0000800a /* EMC_DLL_XFORM_DQS0 */
-				0x0000000a /* EMC_DLL_XFORM_DQS1 */
-				0x0000000a /* EMC_DLL_XFORM_DQS2 */
-				0x0000000a /* EMC_DLL_XFORM_DQS3 */
-				0x0000000a /* EMC_DLL_XFORM_DQS4 */
-				0x0000000a /* EMC_DLL_XFORM_DQS5 */
-				0x0000000a /* EMC_DLL_XFORM_DQS6 */
-				0x0000000a /* EMC_DLL_XFORM_DQS7 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x0000000a /* EMC_DLL_XFORM_DQ0 */
-				0x0000000a /* EMC_DLL_XFORM_DQ1 */
-				0x0000000a /* EMC_DLL_XFORM_DQ2 */
-				0x0000000a /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0600013d /* EMC_XM2DQSPADCTRL2 */
-				0x22220000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f501 /* EMC_XM2COMPPADCTRL */
-				0x07077404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
-				0x080001e8 /* EMC_XM2QUSEPADCTRL */
-				0x08000021 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x00f0000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff49 /* EMC_CFG_RSV */
-			>;
-		};
-	};
-	emc-timings-2 {
-		nvidia,ram-code = <2>;  /* Hynix A RAM */
-		timing-25500000 {
-			clock-frequency = <25500000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000001 /* EMC_RC */
-				0x00000007 /* EMC_RFC */
-				0x00000000 /* EMC_RAS */
-				0x00000000 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000000 /* EMC_RD_RCD */
-				0x00000000 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x000000c0 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x00000008 /* EMC_TXSR */
-				0x00000008 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000002 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x000000c7 /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-51000000 {
-			clock-frequency = <51000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000002 /* EMC_RC */
-				0x0000000f /* EMC_RFC */
-				0x00000001 /* EMC_RAS */
-				0x00000000 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000000 /* EMC_RD_RCD */
-				0x00000000 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000181 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x00000010 /* EMC_TXSR */
-				0x00000010 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000003 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x0000018e /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-102000000 {
-			clock-frequency = <102000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000004 /* EMC_RC */
-				0x0000001e /* EMC_RFC */
-				0x00000003 /* EMC_RAS */
-				0x00000001 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000001 /* EMC_RD_RCD */
-				0x00000001 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000303 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x00000020 /* EMC_TXSR */
-				0x00000020 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000005 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x0000031c /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x007800a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x000fc000 /* EMC_DLL_XFORM_DQS0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS3 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS4 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS5 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS6 */
-				0x000fc000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ0 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ1 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ2 */
-				0x000fc000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00000000 /* EMC_ZCAL_INTERVAL */
-				0x00000040 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-204000000 {
-			clock-frequency = <204000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100003>;
-			nvidia,emc-mode-2 = <0x80200008>;
-			nvidia,emc-mode-reset = <0x80001221>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-cfg-dyn-self-ref;
-			nvidia,emc-configuration = <
-				0x00000009 /* EMC_RC */
-				0x0000003d /* EMC_RFC */
-				0x00000007 /* EMC_RAS */
-				0x00000002 /* EMC_RP */
-				0x00000002 /* EMC_R2W */
-				0x0000000a /* EMC_W2R */
-				0x00000005 /* EMC_R2P */
-				0x0000000b /* EMC_W2P */
-				0x00000002 /* EMC_RD_RCD */
-				0x00000002 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000005 /* EMC_WDV */
-				0x00000005 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000b /* EMC_RDV */
-				0x00000607 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000002 /* EMC_PDEX2WR */
-				0x00000002 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000007 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x00000040 /* EMC_TXSR */
-				0x00000040 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000009 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x00000638 /* EMC_TREFBW */
-				0x00000006 /* EMC_QUSE_EXTRA */
-				0x00000006 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00004288 /* EMC_FBIO_CFG5 */
-				0x004400a4 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x00080000 /* EMC_DLL_XFORM_DQS0 */
-				0x00080000 /* EMC_DLL_XFORM_DQS1 */
-				0x00080000 /* EMC_DLL_XFORM_DQS2 */
-				0x00080000 /* EMC_DLL_XFORM_DQS3 */
-				0x00080000 /* EMC_DLL_XFORM_DQS4 */
-				0x00080000 /* EMC_DLL_XFORM_DQS5 */
-				0x00080000 /* EMC_DLL_XFORM_DQS6 */
-				0x00080000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x00080000 /* EMC_DLL_XFORM_DQ0 */
-				0x00080000 /* EMC_DLL_XFORM_DQ1 */
-				0x00080000 /* EMC_DLL_XFORM_DQ2 */
-				0x00080000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800211c /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f108 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x08000168 /* EMC_XM2QUSEPADCTRL */
-				0x08000000 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x000c000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff00 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-400000000 {
-			clock-frequency = <400000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100002>;
-			nvidia,emc-mode-2 = <0x80200000>;
-			nvidia,emc-mode-reset = <0x80000521>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-configuration = <
-				0x00000012 /* EMC_RC */
-				0x00000076 /* EMC_RFC */
-				0x0000000c /* EMC_RAS */
-				0x00000004 /* EMC_RP */
-				0x00000003 /* EMC_R2W */
-				0x00000008 /* EMC_W2R */
-				0x00000002 /* EMC_R2P */
-				0x0000000a /* EMC_W2P */
-				0x00000004 /* EMC_RD_RCD */
-				0x00000004 /* EMC_WR_RCD */
-				0x00000002 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000004 /* EMC_WDV */
-				0x00000006 /* EMC_QUSE */
-				0x00000004 /* EMC_QRST */
-				0x0000000a /* EMC_QSAFE */
-				0x0000000c /* EMC_RDV */
-				0x00000bf0 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x000002fc /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000001 /* EMC_PDEX2WR */
-				0x00000008 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x00000008 /* EMC_AR2PDEN */
-				0x0000000f /* EMC_RW2PDEN */
-				0x0000007c /* EMC_TXSR */
-				0x00000200 /* EMC_TXSRDLL */
-				0x00000004 /* EMC_TCKE */
-				0x00000010 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000004 /* EMC_TCLKSTABLE */
-				0x00000005 /* EMC_TCLKSTOP */
-				0x00000c30 /* EMC_TREFBW */
-				0x00000000 /* EMC_QUSE_EXTRA */
-				0x00000004 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00007088 /* EMC_FBIO_CFG5 */
-				0x001d0084 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x00044000 /* EMC_DLL_XFORM_DQS0 */
-				0x00044000 /* EMC_DLL_XFORM_DQS1 */
-				0x00044000 /* EMC_DLL_XFORM_DQS2 */
-				0x00044000 /* EMC_DLL_XFORM_DQS3 */
-				0x00044000 /* EMC_DLL_XFORM_DQS4 */
-				0x00044000 /* EMC_DLL_XFORM_DQS5 */
-				0x00044000 /* EMC_DLL_XFORM_DQS6 */
-				0x00044000 /* EMC_DLL_XFORM_DQS7 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00000000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x00058000 /* EMC_DLL_XFORM_DQ0 */
-				0x00058000 /* EMC_DLL_XFORM_DQ1 */
-				0x00058000 /* EMC_DLL_XFORM_DQ2 */
-				0x00058000 /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0800013d /* EMC_XM2DQSPADCTRL2 */
-				0x00000000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f508 /* EMC_XM2COMPPADCTRL */
-				0x05057404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
-				0x080001e8 /* EMC_XM2QUSEPADCTRL */
-				0x08000021 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x0148000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x800018c8 /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff89 /* EMC_CFG_RSV */
-			>;
-		};
-		timing-800000000 {
-			clock-frequency = <800000000>;
-			nvidia,emc-auto-cal-interval = <0x001fffff>;
-			nvidia,emc-mode-1 = <0x80100002>;
-			nvidia,emc-mode-2 = <0x80200018>;
-			nvidia,emc-mode-reset = <0x80000d71>;
-			nvidia,emc-zcal-cnt-long = <0x00000040>;
-			nvidia,emc-cfg-periodic-qrst;
-			nvidia,emc-configuration = <
-				0x00000025 /* EMC_RC */
-				0x000000ee /* EMC_RFC */
-				0x0000001a /* EMC_RAS */
-				0x00000009 /* EMC_RP */
-				0x00000005 /* EMC_R2W */
-				0x0000000d /* EMC_W2R */
-				0x00000004 /* EMC_R2P */
-				0x00000013 /* EMC_W2P */
-				0x00000009 /* EMC_RD_RCD */
-				0x00000009 /* EMC_WR_RCD */
-				0x00000003 /* EMC_RRD */
-				0x00000001 /* EMC_REXT */
-				0x00000000 /* EMC_WEXT */
-				0x00000007 /* EMC_WDV */
-				0x0000000a /* EMC_QUSE */
-				0x00000009 /* EMC_QRST */
-				0x0000000b /* EMC_QSAFE */
-				0x00000011 /* EMC_RDV */
-				0x00001820 /* EMC_REFRESH */
-				0x00000000 /* EMC_BURST_REFRESH_NUM */
-				0x00000608 /* EMC_PRE_REFRESH_REQ_CNT */
-				0x00000003 /* EMC_PDEX2WR */
-				0x00000012 /* EMC_PDEX2RD */
-				0x00000001 /* EMC_PCHG2PDEN */
-				0x00000000 /* EMC_ACT2PDEN */
-				0x0000000f /* EMC_AR2PDEN */
-				0x00000018 /* EMC_RW2PDEN */
-				0x000000f8 /* EMC_TXSR */
-				0x00000200 /* EMC_TXSRDLL */
-				0x00000005 /* EMC_TCKE */
-				0x00000020 /* EMC_TFAW */
-				0x00000000 /* EMC_TRPAB */
-				0x00000007 /* EMC_TCLKSTABLE */
-				0x00000008 /* EMC_TCLKSTOP */
-				0x00001860 /* EMC_TREFBW */
-				0x0000000b /* EMC_QUSE_EXTRA */
-				0x00000006 /* EMC_FBIO_CFG6 */
-				0x00000000 /* EMC_ODT_WRITE */
-				0x00000000 /* EMC_ODT_READ */
-				0x00005088 /* EMC_FBIO_CFG5 */
-				0xf0070191 /* EMC_CFG_DIG_DLL */
-				0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
-				0x0000000c /* EMC_DLL_XFORM_DQS0 */
-				0x007fc00a /* EMC_DLL_XFORM_DQS1 */
-				0x00000008 /* EMC_DLL_XFORM_DQS2 */
-				0x0000000a /* EMC_DLL_XFORM_DQS3 */
-				0x0000000a /* EMC_DLL_XFORM_DQS4 */
-				0x0000000a /* EMC_DLL_XFORM_DQS5 */
-				0x0000000a /* EMC_DLL_XFORM_DQS6 */
-				0x0000000a /* EMC_DLL_XFORM_DQS7 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE0 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE1 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE2 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE3 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE4 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE5 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE6 */
-				0x00018000 /* EMC_DLL_XFORM_QUSE7 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
-				0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
-				0x0000000a /* EMC_DLL_XFORM_DQ0 */
-				0x0000000c /* EMC_DLL_XFORM_DQ1 */
-				0x0000000a /* EMC_DLL_XFORM_DQ2 */
-				0x0000000a /* EMC_DLL_XFORM_DQ3 */
-				0x000002a0 /* EMC_XM2CMDPADCTRL */
-				0x0600013d /* EMC_XM2DQSPADCTRL2 */
-				0x22220000 /* EMC_XM2DQPADCTRL2 */
-				0x77fff884 /* EMC_XM2CLKPADCTRL */
-				0x01f1f501 /* EMC_XM2COMPPADCTRL */
-				0x07077404 /* EMC_XM2VTTGENPADCTRL */
-				0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
-				0x080001e8 /* EMC_XM2QUSEPADCTRL */
-				0x0a000021 /* EMC_XM2DQSPADCTRL3 */
-				0x00000802 /* EMC_CTT_TERM_CTRL */
-				0x00020000 /* EMC_ZCAL_INTERVAL */
-				0x00000100 /* EMC_ZCAL_WAIT_CNT */
-				0x00d0000c /* EMC_MRS_WAIT_CNT */
-				0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
-				0x00000000 /* EMC_CTT */
-				0x00000000 /* EMC_CTT_DURATION */
-				0x8000308c /* EMC_DYN_SELF_REF_CONTROL */
-				0xe8000000 /* EMC_FBIO_SPARE */
-				0xff00ff49 /* EMC_CFG_RSV */
-			>;
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 };
-&state_default {
-	clk_32k_out_pa0 {
-		nvidia,pins = "clk_32k_out_pa0";
-		nvidia,function = "blink";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	uart3_cts_n_pa1 {
-		nvidia,pins = "uart3_cts_n_pa1";
-		nvidia,function = "uartc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap2_fs_pa2 {
-		nvidia,pins = "dap2_fs_pa2";
-		nvidia,function = "i2s1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap2_sclk_pa3 {
-		nvidia,pins = "dap2_sclk_pa3";
-		nvidia,function = "i2s1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap2_din_pa4 {
-		nvidia,pins = "dap2_din_pa4";
-		nvidia,function = "i2s1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap2_dout_pa5 {
-		nvidia,pins = "dap2_dout_pa5";
-		nvidia,function = "i2s1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	sdmmc3_clk_pa6 {
-		nvidia,pins = "sdmmc3_clk_pa6";
-		nvidia,function = "sdmmc3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	sdmmc3_cmd_pa7 {
-		nvidia,pins = "sdmmc3_cmd_pa7";
-		nvidia,function = "sdmmc3";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_a17_pb0 {
-		nvidia,pins = "gmi_a17_pb0";
-		nvidia,function = "spi4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_a18_pb1 {
-		nvidia,pins = "gmi_a18_pb1";
-		nvidia,function = "spi4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_pwr0_pb2 {
-		nvidia,pins = "lcd_pwr0_pb2";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_pclk_pb3 {
-		nvidia,pins = "lcd_pclk_pb3";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc3_dat3_pb4 {
-		nvidia,pins = "sdmmc3_dat3_pb4";
-		nvidia,function = "sdmmc3";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	sdmmc3_dat2_pb5 {
-		nvidia,pins = "sdmmc3_dat2_pb5";
-		nvidia,function = "sdmmc3";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	sdmmc3_dat1_pb6 {
-		nvidia,pins = "sdmmc3_dat1_pb6";
-		nvidia,function = "sdmmc3";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	sdmmc3_dat0_pb7 {
-		nvidia,pins = "sdmmc3_dat0_pb7";
-		nvidia,function = "sdmmc3";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	uart3_rts_n_pc0 {
-		nvidia,pins = "uart3_rts_n_pc0";
-		nvidia,function = "uartc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_pwr1_pc1 {
-		nvidia,pins = "lcd_pwr1_pc1";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	uart2_txd_pc2 {
-		nvidia,pins = "uart2_txd_pc2";
-		nvidia,function = "uartb";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	uart2_rxd_pc3 {
-		nvidia,pins = "uart2_rxd_pc3";
-		nvidia,function = "uartb";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gen1_i2c_scl_pc4 {
-		nvidia,pins = "gen1_i2c_scl_pc4";
-		nvidia,function = "i2c1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-		nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-	};
-	gen1_i2c_sda_pc5 {
-		nvidia,pins = "gen1_i2c_sda_pc5";
-		nvidia,function = "i2c1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-		nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_pwr2_pc6 {
-		nvidia,pins = "lcd_pwr2_pc6";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_wp_n_pc7 {
-		nvidia,pins = "gmi_wp_n_pc7";
-		nvidia,function = "gmi";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	sdmmc3_dat5_pd0 {
-		nvidia,pins = "sdmmc3_dat5_pd0";
-		nvidia,function = "sdmmc3";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc3_dat4_pd1 {
-		nvidia,pins = "sdmmc3_dat4_pd1";
-		nvidia,function = "sdmmc3";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	lcd_dc1_pd2 {
-		nvidia,pins = "lcd_dc1_pd2";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc3_dat6_pd3 {
-		nvidia,pins = "sdmmc3_dat6_pd3";
-		nvidia,function = "spi4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc3_dat7_pd4 {
-		nvidia,pins = "sdmmc3_dat7_pd4";
-		nvidia,function = "spi4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d1_pd5 {
-		nvidia,pins = "vi_d1_pd5";
-		nvidia,function = "sdmmc2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	vi_vsync_pd6 {
-		nvidia,pins = "vi_vsync_pd6";
-		nvidia,function = "ddr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	vi_hsync_pd7 {
-		nvidia,pins = "vi_hsync_pd7";
-		nvidia,function = "ddr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	lcd_d0_pe0 {
-		nvidia,pins = "lcd_d0_pe0";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d1_pe1 {
-		nvidia,pins = "lcd_d1_pe1";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d2_pe2 {
-		nvidia,pins = "lcd_d2_pe2";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d3_pe3 {
-		nvidia,pins = "lcd_d3_pe3";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d4_pe4 {
-		nvidia,pins = "lcd_d4_pe4";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d5_pe5 {
-		nvidia,pins = "lcd_d5_pe5";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d6_pe6 {
-		nvidia,pins = "lcd_d6_pe6";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d7_pe7 {
-		nvidia,pins = "lcd_d7_pe7";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d8_pf0 {
-		nvidia,pins = "lcd_d8_pf0";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d9_pf1 {
-		nvidia,pins = "lcd_d9_pf1";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d10_pf2 {
-		nvidia,pins = "lcd_d10_pf2";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d11_pf3 {
-		nvidia,pins = "lcd_d11_pf3";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d12_pf4 {
-		nvidia,pins = "lcd_d12_pf4";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d13_pf5 {
-		nvidia,pins = "lcd_d13_pf5";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d14_pf6 {
-		nvidia,pins = "lcd_d14_pf6";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d15_pf7 {
-		nvidia,pins = "lcd_d15_pf7";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_ad0_pg0 {
-		nvidia,pins = "gmi_ad0_pg0";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_ad1_pg1 {
-		nvidia,pins = "gmi_ad1_pg1";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_ad2_pg2 {
-		nvidia,pins = "gmi_ad2_pg2";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_ad3_pg3 {
-		nvidia,pins = "gmi_ad3_pg3";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_ad4_pg4 {
-		nvidia,pins = "gmi_ad4_pg4";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_ad5_pg5 {
-		nvidia,pins = "gmi_ad5_pg5";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_ad6_pg6 {
-		nvidia,pins = "gmi_ad6_pg6";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_ad7_pg7 {
-		nvidia,pins = "gmi_ad7_pg7";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_ad8_ph0 {
-		nvidia,pins = "gmi_ad8_ph0";
-		nvidia,function = "pwm0";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_ad9_ph1 {
-		nvidia,pins = "gmi_ad9_ph1";
-		nvidia,function = "pwm1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_ad10_ph2 {
-		nvidia,pins = "gmi_ad10_ph2";
-		nvidia,function = "pwm2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_ad11_ph3 {
-		nvidia,pins = "gmi_ad11_ph3";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_ad12_ph4 {
-		nvidia,pins = "gmi_ad12_ph4";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_ad13_ph5 {
-		nvidia,pins = "gmi_ad13_ph5";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_ad14_ph6 {
-		nvidia,pins = "gmi_ad14_ph6";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_wr_n_pi0 {
-		nvidia,pins = "gmi_wr_n_pi0";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_oe_n_pi1 {
-		nvidia,pins = "gmi_oe_n_pi1";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_dqs_pi2 {
-		nvidia,pins = "gmi_dqs_pi2";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_iordy_pi5 {
-		nvidia,pins = "gmi_iordy_pi5";
-		nvidia,function = "rsvd1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_cs7_n_pi6 {
-		nvidia,pins = "gmi_cs7_n_pi6";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_wait_pi7 {
-		nvidia,pins = "gmi_wait_pi7";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_de_pj1 {
-		nvidia,pins = "lcd_de_pj1";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_cs1_n_pj2 {
-		nvidia,pins = "gmi_cs1_n_pj2";
-		nvidia,function = "rsvd1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_hsync_pj3 {
-		nvidia,pins = "lcd_hsync_pj3";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_vsync_pj4 {
-		nvidia,pins = "lcd_vsync_pj4";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	uart2_cts_n_pj5 {
-		nvidia,pins = "uart2_cts_n_pj5";
-		nvidia,function = "uartb";
-		nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	uart2_rts_n_pj6 {
-		nvidia,pins = "uart2_rts_n_pj6";
-		nvidia,function = "uartb";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_a16_pj7 {
-		nvidia,pins = "gmi_a16_pj7";
-		nvidia,function = "spi4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_adv_n_pk0 {
-		nvidia,pins = "gmi_adv_n_pk0";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_clk_pk1 {
-		nvidia,pins = "gmi_clk_pk1";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_cs2_n_pk3 {
-		nvidia,pins = "gmi_cs2_n_pk3";
-		nvidia,function = "rsvd1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	gmi_cs3_n_pk4 {
-		nvidia,pins = "gmi_cs3_n_pk4";
-		nvidia,function = "nand";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	spdif_out_pk5 {
-		nvidia,pins = "spdif_out_pk5";
-		nvidia,function = "spdif";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	spdif_in_pk6 {
-		nvidia,pins = "spdif_in_pk6";
-		nvidia,function = "spdif";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gmi_a19_pk7 {
-		nvidia,pins = "gmi_a19_pk7";
-		nvidia,function = "spi4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d2_pl0 {
-		nvidia,pins = "vi_d2_pl0";
-		nvidia,function = "sdmmc2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d3_pl1 {
-		nvidia,pins = "vi_d3_pl1";
-		nvidia,function = "sdmmc2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d4_pl2 {
-		nvidia,pins = "vi_d4_pl2";
-		nvidia,function = "vi";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d5_pl3 {
-		nvidia,pins = "vi_d5_pl3";
-		nvidia,function = "sdmmc2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d6_pl4 {
-		nvidia,pins = "vi_d6_pl4";
-		nvidia,function = "vi";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d7_pl5 {
-		nvidia,pins = "vi_d7_pl5";
-		nvidia,function = "sdmmc2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d8_pl6 {
-		nvidia,pins = "vi_d8_pl6";
-		nvidia,function = "sdmmc2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d9_pl7 {
-		nvidia,pins = "vi_d9_pl7";
-		nvidia,function = "sdmmc2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d16_pm0 {
-		nvidia,pins = "lcd_d16_pm0";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d17_pm1 {
-		nvidia,pins = "lcd_d17_pm1";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d18_pm2 {
-		nvidia,pins = "lcd_d18_pm2";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d19_pm3 {
-		nvidia,pins = "lcd_d19_pm3";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d20_pm4 {
-		nvidia,pins = "lcd_d20_pm4";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d21_pm5 {
-		nvidia,pins = "lcd_d21_pm5";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d22_pm6 {
-		nvidia,pins = "lcd_d22_pm6";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_d23_pm7 {
-		nvidia,pins = "lcd_d23_pm7";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	dap1_fs_pn0 {
-		nvidia,pins = "dap1_fs_pn0";
-		nvidia,function = "i2s0";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap1_din_pn1 {
-		nvidia,pins = "dap1_din_pn1";
-		nvidia,function = "i2s0";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap1_dout_pn2 {
-		nvidia,pins = "dap1_dout_pn2";
-		nvidia,function = "i2s0";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap1_sclk_pn3 {
-		nvidia,pins = "dap1_sclk_pn3";
-		nvidia,function = "i2s0";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	lcd_cs0_n_pn4 {
-		nvidia,pins = "lcd_cs0_n_pn4";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_sdout_pn5 {
-		nvidia,pins = "lcd_sdout_pn5";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_dc0_pn6 {
-		nvidia,pins = "lcd_dc0_pn6";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	hdmi_int_pn7 {
-		nvidia,pins = "hdmi_int_pn7";
-		nvidia,function = "hdmi";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	ulpi_data7_po0 {
-		nvidia,pins = "ulpi_data7_po0";
-		nvidia,function = "uarta";
-		nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ulpi_data0_po1 {
-		nvidia,pins = "ulpi_data0_po1";
-		nvidia,function = "uarta";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ulpi_data1_po2 {
-		nvidia,pins = "ulpi_data1_po2";
-		nvidia,function = "uarta";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ulpi_data2_po3 {
-		nvidia,pins = "ulpi_data2_po3";
-		nvidia,function = "uarta";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ulpi_data3_po4 {
-		nvidia,pins = "ulpi_data3_po4";
-		nvidia,function = "uarta";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	ulpi_data4_po5 {
-		nvidia,pins = "ulpi_data4_po5";
-		nvidia,function = "uarta";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ulpi_data5_po6 {
-		nvidia,pins = "ulpi_data5_po6";
-		nvidia,function = "uarta";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ulpi_data6_po7 {
-		nvidia,pins = "ulpi_data6_po7";
-		nvidia,function = "uarta";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	dap3_fs_pp0 {
-		nvidia,pins = "dap3_fs_pp0";
-		nvidia,function = "i2s2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap3_din_pp1 {
-		nvidia,pins = "dap3_din_pp1";
-		nvidia,function = "i2s2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap3_dout_pp2 {
-		nvidia,pins = "dap3_dout_pp2";
-		nvidia,function = "i2s2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap3_sclk_pp3 {
-		nvidia,pins = "dap3_sclk_pp3";
-		nvidia,function = "i2s2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap4_fs_pp4 {
-		nvidia,pins = "dap4_fs_pp4";
-		nvidia,function = "i2s3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap4_din_pp5 {
-		nvidia,pins = "dap4_din_pp5";
-		nvidia,function = "i2s3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap4_dout_pp6 {
-		nvidia,pins = "dap4_dout_pp6";
-		nvidia,function = "i2s3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	dap4_sclk_pp7 {
-		nvidia,pins = "dap4_sclk_pp7";
-		nvidia,function = "i2s3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	kb_col0_pq0 {
-		nvidia,pins = "kb_col0_pq0";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_col1_pq1 {
-		nvidia,pins = "kb_col1_pq1";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_col2_pq2 {
-		nvidia,pins = "kb_col2_pq2";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_col3_pq3 {
-		nvidia,pins = "kb_col3_pq3";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_col4_pq4 {
-		nvidia,pins = "kb_col4_pq4";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_col5_pq5 {
-		nvidia,pins = "kb_col5_pq5";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_col6_pq6 {
-		nvidia,pins = "kb_col6_pq6";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_col7_pq7 {
-		nvidia,pins = "kb_col7_pq7";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row0_pr0 {
-		nvidia,pins = "kb_row0_pr0";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row1_pr1 {
-		nvidia,pins = "kb_row1_pr1";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row2_pr2 {
-		nvidia,pins = "kb_row2_pr2";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row3_pr3 {
-		nvidia,pins = "kb_row3_pr3";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row4_pr4 {
-		nvidia,pins = "kb_row4_pr4";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row5_pr5 {
-		nvidia,pins = "kb_row5_pr5";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row6_pr6 {
-		nvidia,pins = "kb_row6_pr6";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row7_pr7 {
-		nvidia,pins = "kb_row7_pr7";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	kb_row8_ps0 {
-		nvidia,pins = "kb_row8_ps0";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row9_ps1 {
-		nvidia,pins = "kb_row9_ps1";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row10_ps2 {
-		nvidia,pins = "kb_row10_ps2";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row11_ps3 {
-		nvidia,pins = "kb_row11_ps3";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row12_ps4 {
-		nvidia,pins = "kb_row12_ps4";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row13_ps5 {
-		nvidia,pins = "kb_row13_ps5";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row14_ps6 {
-		nvidia,pins = "kb_row14_ps6";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	kb_row15_ps7 {
-		nvidia,pins = "kb_row15_ps7";
-		nvidia,function = "kbc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_pclk_pt0 {
-		nvidia,pins = "vi_pclk_pt0";
-		nvidia,function = "rsvd1";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_mclk_pt1 {
-		nvidia,pins = "vi_mclk_pt1";
-		nvidia,function = "vi";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	vi_d10_pt2 {
-		nvidia,pins = "vi_d10_pt2";
-		nvidia,function = "ddr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	vi_d11_pt3 {
-		nvidia,pins = "vi_d11_pt3";
-		nvidia,function = "ddr";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	vi_d0_pt4 {
-		nvidia,pins = "vi_d0_pt4";
-		nvidia,function = "ddr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	gen2_i2c_scl_pt5 {
-		nvidia,pins = "gen2_i2c_scl_pt5";
-		nvidia,function = "i2c2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-		nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-	};
-	gen2_i2c_sda_pt6 {
-		nvidia,pins = "gen2_i2c_sda_pt6";
-		nvidia,function = "i2c2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-		nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_cmd_pt7 {
-		nvidia,pins = "sdmmc4_cmd_pt7";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	pu0 {
-		nvidia,pins = "pu0";
-		nvidia,function = "owr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pu1 {
-		nvidia,pins = "pu1";
-		nvidia,function = "rsvd1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pu2 {
-		nvidia,pins = "pu2";
-		nvidia,function = "rsvd1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pu3 {
-		nvidia,pins = "pu3";
-		nvidia,function = "pwm0";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pu4 {
-		nvidia,pins = "pu4";
-		nvidia,function = "pwm1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pu5 {
-		nvidia,pins = "pu5";
-		nvidia,function = "rsvd4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pu6 {
-		nvidia,pins = "pu6";
-		nvidia,function = "pwm3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	jtag_rtck_pu7 {
-		nvidia,pins = "jtag_rtck_pu7";
-		nvidia,function = "rtck";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pv0 {
-		nvidia,pins = "pv0";
-		nvidia,function = "rsvd1";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	pv1 {
-		nvidia,pins = "pv1";
-		nvidia,function = "rsvd1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pv2 {
-		nvidia,pins = "pv2";
-		nvidia,function = "owr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pv3 {
-		nvidia,pins = "pv3";
-		nvidia,function = "clk_12m_out";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ddc_scl_pv4 {
-		nvidia,pins = "ddc_scl_pv4";
-		nvidia,function = "i2c4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	ddc_sda_pv5 {
-		nvidia,pins = "ddc_sda_pv5";
-		nvidia,function = "i2c4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	crt_hsync_pv6 {
-		nvidia,pins = "crt_hsync_pv6";
-		nvidia,function = "crt";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	crt_vsync_pv7 {
-		nvidia,pins = "crt_vsync_pv7";
-		nvidia,function = "crt";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_cs1_n_pw0 {
-		nvidia,pins = "lcd_cs1_n_pw0";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_m1_pw1 {
-		nvidia,pins = "lcd_m1_pw1";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	spi2_cs1_n_pw2 {
-		nvidia,pins = "spi2_cs1_n_pw2";
-		nvidia,function = "spi2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	clk1_out_pw4 {
-		nvidia,pins = "clk1_out_pw4";
-		nvidia,function = "extperiph1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	clk2_out_pw5 {
-		nvidia,pins = "clk2_out_pw5";
-		nvidia,function = "extperiph2";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	uart3_txd_pw6 {
-		nvidia,pins = "uart3_txd_pw6";
-		nvidia,function = "uartc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	uart3_rxd_pw7 {
-		nvidia,pins = "uart3_rxd_pw7";
-		nvidia,function = "uartc";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	spi2_sck_px2 {
-		nvidia,pins = "spi2_sck_px2";
-		nvidia,function = "gmi";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	spi1_mosi_px4 {
-		nvidia,pins = "spi1_mosi_px4";
-		nvidia,function = "spi1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	spi1_sck_px5 {
-		nvidia,pins = "spi1_sck_px5";
-		nvidia,function = "spi1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	spi1_cs0_n_px6 {
-		nvidia,pins = "spi1_cs0_n_px6";
-		nvidia,function = "spi1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	spi1_miso_px7 {
-		nvidia,pins = "spi1_miso_px7";
-		nvidia,function = "spi1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ulpi_clk_py0 {
-		nvidia,pins = "ulpi_clk_py0";
-		nvidia,function = "uartd";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	ulpi_dir_py1 {
-		nvidia,pins = "ulpi_dir_py1";
-		nvidia,function = "uartd";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	ulpi_nxt_py2 {
-		nvidia,pins = "ulpi_nxt_py2";
-		nvidia,function = "uartd";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	ulpi_stp_py3 {
-		nvidia,pins = "ulpi_stp_py3";
-		nvidia,function = "uartd";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc1_dat3_py4 {
-		nvidia,pins = "sdmmc1_dat3_py4";
-		nvidia,function = "sdmmc1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc1_dat2_py5 {
-		nvidia,pins = "sdmmc1_dat2_py5";
-		nvidia,function = "sdmmc1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc1_dat1_py6 {
-		nvidia,pins = "sdmmc1_dat1_py6";
-		nvidia,function = "sdmmc1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc1_dat0_py7 {
-		nvidia,pins = "sdmmc1_dat0_py7";
-		nvidia,function = "sdmmc1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc1_clk_pz0 {
-		nvidia,pins = "sdmmc1_clk_pz0";
-		nvidia,function = "sdmmc1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc1_cmd_pz1 {
-		nvidia,pins = "sdmmc1_cmd_pz1";
-		nvidia,function = "sdmmc1";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_sdin_pz2 {
-		nvidia,pins = "lcd_sdin_pz2";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_wr_n_pz3 {
-		nvidia,pins = "lcd_wr_n_pz3";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	lcd_sck_pz4 {
-		nvidia,pins = "lcd_sck_pz4";
-		nvidia,function = "displaya";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sys_clk_req_pz5 {
-		nvidia,pins = "sys_clk_req_pz5";
-		nvidia,function = "sysclk";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pwr_i2c_scl_pz6 {
-		nvidia,pins = "pwr_i2c_scl_pz6";
-		nvidia,function = "i2cpwr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-	};
-	pwr_i2c_sda_pz7 {
-		nvidia,pins = "pwr_i2c_sda_pz7";
-		nvidia,function = "i2cpwr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,open-drain = <TEGRA_PIN_ENABLE>;
-	};
-	sdmmc4_dat0_paa0 {
-		nvidia,pins = "sdmmc4_dat0_paa0";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_dat1_paa1 {
-		nvidia,pins = "sdmmc4_dat1_paa1";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_dat2_paa2 {
-		nvidia,pins = "sdmmc4_dat2_paa2";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_dat3_paa3 {
-		nvidia,pins = "sdmmc4_dat3_paa3";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_dat4_paa4 {
-		nvidia,pins = "sdmmc4_dat4_paa4";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_dat5_paa5 {
-		nvidia,pins = "sdmmc4_dat5_paa5";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_dat6_paa6 {
-		nvidia,pins = "sdmmc4_dat6_paa6";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_dat7_paa7 {
-		nvidia,pins = "sdmmc4_dat7_paa7";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_UP>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	pbb0 {
-		nvidia,pins = "pbb0";
-		nvidia,function = "i2s4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	cam_i2c_scl_pbb1 {
-		nvidia,pins = "cam_i2c_scl_pbb1";
-		nvidia,function = "i2c3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-		nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-	};
-	cam_i2c_sda_pbb2 {
-		nvidia,pins = "cam_i2c_sda_pbb2";
-		nvidia,function = "i2c3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-		nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-	};
-	pbb3 {
-		nvidia,pins = "pbb3";
-		nvidia,function = "vgp3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pbb4 {
-		nvidia,pins = "pbb4";
-		nvidia,function = "vgp4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pbb5 {
-		nvidia,pins = "pbb5";
-		nvidia,function = "vgp5";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pbb6 {
-		nvidia,pins = "pbb6";
-		nvidia,function = "vgp6";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pbb7 {
-		nvidia,pins = "pbb7";
-		nvidia,function = "i2s4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	cam_mclk_pcc0 {
-		nvidia,pins = "cam_mclk_pcc0";
-		nvidia,function = "vi_alt3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	pcc1 {
-		nvidia,pins = "pcc1";
-		nvidia,function = "i2s4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	pcc2 {
-		nvidia,pins = "pcc2";
-		nvidia,function = "i2s4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_rst_n_pcc3 {
-		nvidia,pins = "sdmmc4_rst_n_pcc3";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	sdmmc4_clk_pcc4 {
-		nvidia,pins = "sdmmc4_clk_pcc4";
-		nvidia,function = "sdmmc4";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,io-reset = <TEGRA_PIN_DISABLE>;
-	};
-	clk2_req_pcc5 {
-		nvidia,pins = "clk2_req_pcc5";
-		nvidia,function = "dap";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l2_rst_n_pcc6 {
-		nvidia,pins = "pex_l2_rst_n_pcc6";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l2_clkreq_n_pcc7 {
-		nvidia,pins = "pex_l2_clkreq_n_pcc7";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l0_prsnt_n_pdd0 {
-		nvidia,pins = "pex_l0_prsnt_n_pdd0";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l0_rst_n_pdd1 {
-		nvidia,pins = "pex_l0_rst_n_pdd1";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l0_clkreq_n_pdd2 {
-		nvidia,pins = "pex_l0_clkreq_n_pdd2";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_wake_n_pdd3 {
-		nvidia,pins = "pex_wake_n_pdd3";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l1_prsnt_n_pdd4 {
-		nvidia,pins = "pex_l1_prsnt_n_pdd4";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l1_rst_n_pdd5 {
-		nvidia,pins = "pex_l1_rst_n_pdd5";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l1_clkreq_n_pdd6 {
-		nvidia,pins = "pex_l1_clkreq_n_pdd6";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	pex_l2_prsnt_n_pdd7 {
-		nvidia,pins = "pex_l2_prsnt_n_pdd7";
-		nvidia,function = "pcie";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	clk3_out_pee0 {
-		nvidia,pins = "clk3_out_pee0";
-		nvidia,function = "extperiph3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	clk3_req_pee1 {
-		nvidia,pins = "clk3_req_pee1";
-		nvidia,function = "dev3";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	clk1_req_pee2 {
-		nvidia,pins = "clk1_req_pee2";
-		nvidia,function = "dap";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-	};
-	hdmi_cec_pee3 {
-		nvidia,pins = "hdmi_cec_pee3";
-		nvidia,function = "cec";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_DISABLE>;
-		nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-		nvidia,open-drain = <TEGRA_PIN_DISABLE>;
-	};
-	owr {
-		nvidia,pins = "owr";
-		nvidia,function = "owr";
-		nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-		nvidia,tristate = <TEGRA_PIN_ENABLE>;
-		nvidia,enable-input = <TEGRA_PIN_DISABLE>;
-	};
-	drive_groups {
-		nvidia,pins = "drive_gma",
-			      "drive_gmb",
-			      "drive_gmc",
-			      "drive_gmd";
-		nvidia,pull-down-strength = <9>;
-		nvidia,pull-up-strength = <9>;
-		nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-		nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-	};
-};
-
-&emc_icc_dvfs_opp_table {
-	/delete-node/ opp@900000000,1350;
-};
-
-&emc_bw_dfs_opp_table {
-	/delete-node/ opp@900000000;
-};
diff --git a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts b/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
new file mode 100644
index 000000000000..8d10eb8b48b9
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
@@ -0,0 +1,2858 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+#include "tegra30-asus-lvds-display.dtsi"
+
+/ {
+	model = "Pegatron Chagall";
+	compatible = "pegatron,chagall", "nvidia,tegra30";
+	chassis-type = "tablet";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* uSD slot */
+		mmc2 = &sdmmc3; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		display0 = &lcd;
+		display1 = &hdmi;
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@beb00000 {
+			compatible = "ramoops";
+			reg = <0xbeb00000 0x10000>; /* 64kB */
+			console-size = <0x8000>; /* 32kB */
+			record-size = <0x400>; /* 1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>; /* 2MB */
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi: hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&hdmi_5v0_sys>;
+			pll-supply = <&vdd_1v8_vio>;
+			vdd-supply = <&vdd_3v3_sys>;
+
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+		};
+	};
+
+	vde@6001a000 {
+		assigned-clocks = <&tegra_car TEGRA30_CLK_VDE>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_P>;
+		assigned-clock-rates = <408000000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* SDMMC1 pinmux */
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC2 pinmux */
+			vi_d1_pd5 {
+				nvidia,pins = "vi_d1_pd5",
+						"vi_d2_pl0",
+						"vi_d3_pl1",
+						"vi_d5_pl3",
+						"vi_d7_pl5";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d8_pl6 {
+				nvidia,pins = "vi_d8_pl6",
+						"vi_d9_pl7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			/* SDMMC3 pinmux */
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat5_pd0",
+						"sdmmc3_dat4_pd1",
+						"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* SDMMC4 pinmux */
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2C pinmux */
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			/* HDMI-CEC pinmux */
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+			};
+
+			/* UART-A */
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-B */
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2",
+						"uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3",
+						"uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* UART-C */
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* UART-D */
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1",
+						"ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* I2S pinmux */
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_din_pn1",
+						"dap1_dout_pn2",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1",
+						"dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4",
+						"dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* PCI-e pinmux */
+			pex_l2_rst_n_pcc6 {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+						"pex_l0_rst_n_pdd1",
+						"pex_l1_rst_n_pdd5";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pex_l2_clkreq_n_pcc7 {
+				nvidia,pins = "pex_l2_clkreq_n_pcc7",
+						"pex_l0_prsnt_n_pdd0",
+						"pex_l0_clkreq_n_pdd2",
+						"pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* SPI pinmux */
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4",
+						"spi1_sck_px5",
+						"spi1_cs0_n_px6",
+						"spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2",
+						"spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			spi2_sck_px2 {
+				nvidia,pins = "spi2_sck_px2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+						"gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Display A pinmux */
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+						"lcd_pclk_pb3",
+						"lcd_pwr1_pc1",
+						"lcd_pwr2_pc6",
+						"lcd_d0_pe0",
+						"lcd_d1_pe1",
+						"lcd_d2_pe2",
+						"lcd_d3_pe3",
+						"lcd_d4_pe4",
+						"lcd_d5_pe5",
+						"lcd_d6_pe6",
+						"lcd_d7_pe7",
+						"lcd_d8_pf0",
+						"lcd_d9_pf1",
+						"lcd_d10_pf2",
+						"lcd_d11_pf3",
+						"lcd_d12_pf4",
+						"lcd_d13_pf5",
+						"lcd_d14_pf6",
+						"lcd_d15_pf7",
+						"lcd_de_pj1",
+						"lcd_hsync_pj3",
+						"lcd_vsync_pj4",
+						"lcd_d16_pm0",
+						"lcd_d17_pm1",
+						"lcd_d18_pm2",
+						"lcd_d19_pm3",
+						"lcd_d20_pm4",
+						"lcd_d21_pm5",
+						"lcd_d22_pm6",
+						"lcd_d23_pm7",
+						"lcd_cs0_n_pn4",
+						"lcd_sdout_pn5",
+						"lcd_dc0_pn6",
+						"lcd_sdin_pz2",
+						"lcd_wr_n_pz3",
+						"lcd_sck_pz4",
+						"lcd_cs1_n_pw0",
+						"lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* KBC keys */
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0",
+						"kb_row1_pr1",
+						"kb_row2_pr2",
+						"kb_row3_pr3",
+						"kb_row8_ps0",
+						"kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_col2_pq2",
+						"kb_col3_pq3",
+						"kb_col4_pq4",
+						"kb_col5_pq5",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4",
+						"kb_row7_pr7",
+						"kb_row10_ps2",
+						"kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3",
+						"kb_row12_ps4",
+						"kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_pclk_pt0 {
+				nvidia,pins = "vi_pclk_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			sdmmc4_rst_n_pcc3 {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_vsync_pd6 {
+				nvidia,pins = "vi_vsync_pd6",
+						"vi_hsync_pd7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			vi_d10_pt2 {
+				nvidia,pins = "vi_d10_pt2",
+						"vi_d0_pt4", "pbb0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			vi_d11_pt3 {
+				nvidia,pins = "vi_d11_pt3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pex_l1_prsnt_n_pdd4 {
+				nvidia,pins = "pex_l1_prsnt_n_pdd4",
+						"pex_l1_clkreq_n_pdd6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_wait_pi7 {
+				nvidia,pins = "gmi_wait_pi7",
+						"gmi_cs0_n_pj0",
+						"gmi_cs1_n_pj2",
+						"gmi_cs4_n_pk2";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1",
+						"gmi_ad2_pg2",
+						"gmi_ad3_pg3",
+						"gmi_ad4_pg4",
+						"gmi_ad5_pg5",
+						"gmi_ad6_pg6",
+						"gmi_ad7_pg7",
+						"gmi_wr_n_pi0",
+						"gmi_oe_n_pi1",
+						"gmi_dqs_pi2",
+						"gmi_adv_n_pk0",
+						"gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_cs2_n_pk3 {
+				nvidia,pins = "gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs3_n_pk4 {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad11_ph3",
+						"gmi_ad14_ph6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5",
+						"gmi_ad12_ph4",
+						"gmi_cs7_n_pi6";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_rst_n_pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_ad8_ph0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			gmi_cs6_n_pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d4_pl2 {
+				nvidia,pins = "vi_d4_pl2";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			vi_d6_pl4 {
+				nvidia,pins = "vi_d6_pl4";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <0>;
+				nvidia,io-reset = <0>;
+			};
+
+			vi_mclk_pt1 {
+				nvidia,pins = "vi_mclk_pt1";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* HDMI hot-plug-detect */
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			jtag_rtck_pu7 {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+						"crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pv2 {
+				nvidia,pins = "pv2",
+						"kb_row5_pr5";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* GPIO power/drive control */
+			drive_dap1 {
+				nvidia,pins = "drive_dap1",
+						"drive_dap2",
+						"drive_dbg",
+						"drive_at5",
+						"drive_gme",
+						"drive_ddc",
+						"drive_ao1",
+						"drive_uart3";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <5>;
+				nvidia,pull-up-strength = <5>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+
+			drive_gma {
+				nvidia,pins = "drive_gma",
+						"drive_gmb",
+						"drive_gmc",
+						"drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			drive_lcd2 {
+				nvidia,pins = "drive_lcd2";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_4>;
+				nvidia,pull-down-strength = <20>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Broadcom GPS BCM47511 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		/* Azurewave AW-AH663 BCM4330B1 */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	lcd_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Wolfson Microelectronics WM8903 audio codec */
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_BOTH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+
+			AVDD-supply  = <&vdd_1v8_vio>;
+			CPVDD-supply = <&vdd_1v8_vio>;
+			DBVDD-supply = <&vdd_1v8_vio>;
+			DCVDD-supply = <&vdd_1v8_vio>;
+		};
+	};
+
+	i2c2: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Atmel touchscreen */
+		touchscreen@4d {
+			compatible = "atmel,maxtouch";
+			reg = <0x4d>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio TEGRA_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+		};
+	};
+
+	i2c3: i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* AsahiKASEI AK8975 magnetometer sensor */
+		magnetometer@c {
+			compatible = "asahi-kasei,ak8975";
+			reg = <0x0c>;
+
+			vdd-supply = <&vdd_3v3_sen>;
+			vid-supply = <&vdd_1v8_vio>;
+
+			mount-matrix =   "0",  "1",  "0",
+					 "1",  "0",  "0",
+					 "0",  "0", "-1";
+		};
+
+		light-sensor@44 {
+			compatible = "isil,isl29023";
+			reg = <0x44>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Q, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			vcc-supply = <&vdd_3v3_sen>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_3v3_sen>;
+			vlogic-supply = <&vdd_1v8_vio>;
+
+			mount-matrix =   "0",  "1",  "0",
+					 "1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			/* External I2C interface */
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0x0f>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(L, 1) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_vio>;
+					vddio-supply = <&vdd_1v8_vio>;
+
+					mount-matrix =  "-1",  "0",  "0",
+							 "0",  "1",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <93750>;
+	};
+
+	i2c5: i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Texas Instruments TPS659110 PMIC */
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			wakeup-source;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_sys>;
+			vcc2-supply = <&vdd_5v0_sys>;
+			vcc3-supply = <&vdd_1v8_vio>;
+			vcc4-supply = <&vdd_1v8_vio>;
+			vcc5-supply = <&vdd_5v0_sys>;
+			vcc6-supply = <&vddio_1v2_ddr>;
+			vcc7-supply = <&vdd_5v0_sys>;
+			vccio-supply = <&vdd_5v0_sys>;
+
+			pmic-sleep-hog {
+				gpio-hog;
+				gpios = <0 GPIO_ACTIVE_HIGH>,
+					<2 GPIO_ACTIVE_HIGH>,
+					<6 GPIO_ACTIVE_HIGH>,
+					<8 GPIO_ACTIVE_HIGH>;
+				output-high;
+			};
+
+			regulators {
+				/* VDD1 is not used by Chagall */
+
+				vddio_1v2_ddr: vdd2 {
+					regulator-name = "vddio_1v2_ddr";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8_vio: vio {
+					regulator-name = "vdd_1v8_gen";
+					/* FIXME: eMMC won't work, if set to 1.8 V */
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* eMMC VDD */
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_emmc_core";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* uSD slot VDD */
+				vdd_usd: ldo2 {
+					regulator-name = "vdd_usd";
+					regulator-min-microvolt = <3200000>;
+					regulator-max-microvolt = <3200000>;
+				};
+
+				/* uSD slot VDDIO */
+				vddio_usd: ldo3 {
+					regulator-name = "vddio_usd";
+					regulator-min-microvolt = <1900000>;
+					regulator-max-microvolt = <3200000>;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_1v3_cam_isp";
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+				};
+
+				ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 5) IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1770000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	vdd_5v0_sys: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_pnl: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <300000>;
+		gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_sen: regulator-sensors {
+		compatible = "regulator-fixed";
+		regulator-name = "sen_3v3_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(K, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_5v0_bl: regulator-bl {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	hdmi_5v0_sys: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi_5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_vbus_usb1: regulator-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbus_micro_usb";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_vbus_usb3: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbus_typea_usb";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(CC, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <2>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+
+		/* Set DEV_OFF + PWR_OFF_SET bit in DCDC control register of TPS65911 PMIC  */
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x2d>;
+			nvidia,reg-addr = <0x3f>;
+			nvidia,reg-data = <0x81>;
+		};
+	};
+
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			/* SAMSUNG K4P8G304EB FGC1 */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000048
+					0x00000002 0x00000003 0x0000000c 0x00000007
+					0x00000009 0x00000001 0x00000002 0x00000006
+					0x00000001 0x00000000 0x00000004 0x00000004
+					0x04040001 0x000d090c 0x7026120d 0x001f0000 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* ELPIDA EDB8132B2MA 8D_F */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emem-configuration = < 0x00000006 0xc0000048
+					0x00000002 0x00000003 0x0000000c 0x00000007
+					0x00000009 0x00000001 0x00000002 0x00000006
+					0x00000001 0x00000000 0x00000004 0x00000004
+					0x04040001 0x000d090c 0x7026120d 0x001f0000 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* SAMSUNG K4P8G304EB FGC2 */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emem-configuration = < 0x00000008 0xc0000060
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000008
+					0x00000002 0x00000000 0x00000004 0x00000005
+					0x05040002 0x00110b10 0x70281811 0x001f0000 >;
+			};
+		};
+
+		emc-timings-3 {
+			/* HYNIX H9TCNNN8JDMMPR NGM */
+			nvidia,ram-code = <3>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = < 0x00020001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x73e30303 0x001f0000 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = < 0x00010001 0xc0000010
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060402 0x72c30303 0x001f0000 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = < 0x00000001 0xc0000018
+					0x00000001 0x00000001 0x00000003 0x00000001
+					0x00000003 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000002 0x00000002
+					0x02020001 0x00060403 0x72430504 0x001f0000 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = < 0x00000003 0xc0000025
+					0x00000001 0x00000001 0x00000006 0x00000003
+					0x00000005 0x00000001 0x00000002 0x00000004
+					0x00000001 0x00000000 0x00000003 0x00000002
+					0x02030001 0x00070506 0x71e40a07 0x001f0000 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emem-configuration = < 0x00000008 0xc0000060
+					0x00000003 0x00000004 0x00000010 0x0000000a
+					0x0000000d 0x00000002 0x00000002 0x00000008
+					0x00000002 0x00000000 0x00000004 0x00000005
+					0x05040002 0x00110b10 0x70281811 0x001f0000 >;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			/* SAMSUNG K4P8G304EB FGC1 */
+			nvidia,ram-code = <0>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010082>;
+				nvidia,emc-mode-2 = <0x00020004>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000024>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000017
+					0x00000033 0x00000010 0x00000007 0x00000007
+					0x00000007 0x00000002 0x0000000a 0x00000007
+					0x00000007 0x00000003 0x00000002 0x00000000
+					0x00000003 0x00000007 0x00000004 0x0000000d
+					0x0000000e 0x000005e9 0x00000000 0x0000017a
+					0x00000002 0x00000002 0x00000007 0x00000000
+					0x00000001 0x0000000c 0x00000038 0x00000038
+					0x00000006 0x00000014 0x00000009 0x00000004
+					0x00000002 0x00000680 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0x001d0084
+					0x00008000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00038000 0x00038000 0x00038000
+					0x00038000 0x00080220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000090 0x000c000c 0xa0f10404 0x00000000
+					0x00000000 0x80000ce6 0xe0000000 0xff00ff88 >;
+			};
+		};
+
+		emc-timings-1 {
+			/* ELPIDA EDB8132B2MA 8D_F */
+			nvidia,ram-code = <1>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00070000 0x00070000 0x00070000
+					0x00070000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-400000000 {
+				clock-frequency = <400000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010082>;
+				nvidia,emc-mode-2 = <0x00020004>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000024>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000017
+					0x00000033 0x00000010 0x00000007 0x00000007
+					0x00000007 0x00000002 0x0000000a 0x00000007
+					0x00000007 0x00000003 0x00000002 0x00000000
+					0x00000003 0x00000007 0x00000004 0x0000000d
+					0x0000000e 0x000005e9 0x00000000 0x0000017a
+					0x00000002 0x00000002 0x00000007 0x00000000
+					0x00000001 0x0000000c 0x00000038 0x00000038
+					0x00000006 0x00000014 0x00000009 0x00000004
+					0x00000002 0x00000680 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0x001d0084
+					0x00008000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00034000 0x00034000 0x00034000
+					0x00034000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00048000 0x00048000 0x00048000
+					0x00048000 0x00060220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000090 0x000c000c 0xa0f10000 0x00000000
+					0x00000000 0x80000ce6 0xe0000000 0xff00ff88 >;
+			};
+		};
+
+		emc-timings-2 {
+			/* SAMSUNG K4P8G304EB FGC2 */
+			nvidia,ram-code = <2>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x00000009 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000004 0x00000001 0x0000000c
+					0x0000000a 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000005 0x00000004
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020006>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000030>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000045 0x00000016 0x00000009 0x00000008
+					0x00000009 0x00000003 0x0000000d 0x00000009
+					0x00000009 0x00000005 0x00000003 0x00000000
+					0x00000004 0x0000000a 0x00000006 0x0000000d
+					0x00000010 0x000007df 0x00000000 0x000001f7
+					0x00000003 0x00000003 0x00000009 0x00000000
+					0x00000001 0x0000000f 0x0000004b 0x0000004b
+					0x00000008 0x0000001b 0x0000000c 0x00000004
+					0x00000002 0x000008aa 0x00000000 0x00000004
+					0x00000000 0x00000000 0x00006282 0xf0120091
+					0x00008000 0x007f8008 0x007f8008 0x007f8008
+					0x007f8008 0x007f8008 0x007f8008 0x007f8008
+					0x007f8008 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x00080220 0x0200003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000c0 0x000e000e 0xa0f10000 0x00000000
+					0x00000000 0x800010d9 0xf0000000 0xff00ff88 >;
+			};
+		};
+
+		emc-timings-3 {
+			/* HYNIX H9TCNNN8JDMMPR NGM */
+			nvidia,ram-code = <3>;
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000001
+					0x00000003 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000060 0x00000000 0x00000018
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000004 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x0000006b 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000000a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x800001c5 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000009>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000003
+					0x00000006 0x00000002 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x000000c0 0x00000000 0x00000030
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x00000008 0x00000008
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000000d5 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000013 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000287 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010022>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x0000000a>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x00000006
+					0x0000000d 0x00000004 0x00000002 0x00000004
+					0x00000004 0x00000001 0x00000005 0x00000002
+					0x00000002 0x00000001 0x00000001 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000b
+					0x0000000a 0x00000181 0x00000000 0x00000060
+					0x00000001 0x00000001 0x00000002 0x00000000
+					0x00000001 0x00000007 0x0000000f 0x0000000f
+					0x00000003 0x00000008 0x00000004 0x00000004
+					0x00000002 0x000001a9 0x00000004 0x00000004
+					0x00000000 0x00000000 0x00004282 0x007800a4
+					0x00008000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x000fc000 0x000fc000 0x000fc000
+					0x000fc000 0x00100220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x00000025 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x8000040b 0xe0000000 0xff00ff00 >;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x00010042>;
+				nvidia,emc-mode-2 = <0x00020001>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000013>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000000c
+					0x0000001a 0x00000008 0x00000003 0x00000005
+					0x00000004 0x00000001 0x00000006 0x00000003
+					0x00000003 0x00000002 0x00000002 0x00000000
+					0x00000001 0x00000003 0x00000001 0x0000000c
+					0x0000000b 0x00000303 0x00000000 0x000000c0
+					0x00000001 0x00000001 0x00000003 0x00000000
+					0x00000001 0x00000007 0x0000001d 0x0000001d
+					0x00000004 0x0000000b 0x00000005 0x00000004
+					0x00000002 0x00000351 0x00000004 0x00000006
+					0x00000000 0x00000000 0x00004282 0x004400a4
+					0x00008000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00072000 0x00072000 0x00072000
+					0x00072000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00080000 0x00080000 0x00080000
+					0x00080000 0x000e0220 0x0800201c 0x00000000
+					0x77ffc004 0x01f1f008 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x0000004a 0x00090009 0xa0f10000 0x00000000
+					0x00000000 0x80000713 0xd0000000 0xff00ff00 >;
+			};
+
+			timing-533000000 {
+				clock-frequency = <533000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x000100c2>;
+				nvidia,emc-mode-2 = <0x00020006>;
+				nvidia,emc-mode-reset = <0x00000000>;
+				nvidia,emc-zcal-cnt-long = <0x00000030>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration =  < 0x0000001f
+					0x00000045 0x00000016 0x00000009 0x00000008
+					0x00000009 0x00000003 0x0000000d 0x00000009
+					0x00000009 0x00000005 0x00000003 0x00000000
+					0x00000004 0x00000009 0x00000006 0x0000000d
+					0x00000010 0x000007df 0x00000000 0x000001f7
+					0x00000003 0x00000003 0x00000009 0x00000000
+					0x00000001 0x0000000f 0x0000004b 0x0000004b
+					0x00000008 0x0000001b 0x0000000c 0x00000004
+					0x00000002 0x000008aa 0x00000000 0x00000006
+					0x00000000 0x00000000 0x00006282 0xf0120091
+					0x00008000 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x0000000a 0x0000000a 0x0000000a
+					0x0000000a 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000000 0x00000000
+					0x00000000 0x0000000c 0x0000000c 0x0000000c
+					0x0000000c 0x000a0220 0x0800003d 0x00000000
+					0x77ffc004 0x01f1f408 0x00000000 0x00000007
+					0x08000068 0x08000000 0x00000802 0x00064000
+					0x000000c0 0x000e000e 0xa0f10000 0x00000000
+					0x00000000 0x800010d9 0xe0000000 0xff00ff88 >;
+			};
+		};
+	};
+
+	hda@70030000 {
+		status = "okay";
+	};
+
+	ahub@70080000 {
+		i2s@70080400 { /* i2s1 */
+			status = "okay";
+		};
+
+		/* BT SCO */
+		i2s@70080600 { /* i2s3 */
+			status = "okay";
+		};
+	};
+
+	sdmmc1: mmc@78000000 {
+		status = "okay";
+
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+
+		vmmc-supply = <&vdd_usd>; /* ldo2 */
+		vqmmc-supply = <&vddio_usd>; /* ldo3 */
+	};
+
+	sdmmc3: mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_C>;
+		assigned-clock-rates = <50000000>;
+
+		max-frequency = <50000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+
+		/* Azurewave AW-AH663 BCM4330B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc4: mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8_vio>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "otg";
+		vbus-supply = <&vdd_vbus_usb1>;
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_vbus_usb3>;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_5v0_bl>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <15>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu2: cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+		cpu3: cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	display-panel {
+		compatible = "panel-lvds";
+
+		width-mm = <217>;
+		height-mm = <136>;
+
+		data-mapping = "jeida-24";
+
+		panel-timing {
+			/* 1280x800@60Hz */
+			clock-frequency = <68000000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <48>;
+			hback-porch = <18>;
+			hsync-len = <30>;
+			vsync-len = <5>;
+			vfront-porch = <3>;
+			vback-porch = <12>;
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-dock-insert {
+			label = "Chagall Dock";
+			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_DOCK>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		switch-lineout-detect {
+			label = "Audio dock line-out detect";
+			gpios = <&gpio TEGRA_GPIO(S, 3) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEOUT_INSERT>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	opp-table-actmon {
+		/delete-node/ opp-625000000;
+		/delete-node/ opp-667000000;
+		/delete-node/ opp-750000000;
+		/delete-node/ opp-800000000;
+		/delete-node/ opp-900000000;
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-625000000-1200;
+		/delete-node/ opp-625000000-1250;
+		/delete-node/ opp-667000000-1200;
+		/delete-node/ opp-750000000-1300;
+		/delete-node/ opp-800000000-1300;
+		/delete-node/ opp-900000000-1350;
+	};
+
+	brcm_wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	sound {
+		compatible = "pegatron,tegra-audio-wm8903-chagall",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Pegatron Chagall WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"IN1R", "Mic Jack",
+			"DMICDAT", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,headset;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		/*
+		 * NCT72 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone exists as a simpler solution which prevents
+		 * Chagall from getting too hot from a user's tactile
+		 * perspective. The CPU zone is intended to protect
+		 * silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 65C */
+					temperature = <65000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT
+								  THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi
index cbe84d25e726..a2d557155114 100644
--- a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi
+++ b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi
@@ -1,383 +1,1648 @@
 // SPDX-License-Identifier: GPL-2.0
 
 / {
-	emc_icc_dvfs_opp_table: emc-dvfs-opp-table {
+	core_opp_table: opp-table-core {
 		compatible = "operating-points-v2";
+		opp-shared;
 
-		opp@12750000,950 {
+		core_opp_950: opp-950000 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-level = <950000>;
+		};
+
+		core_opp_1000: opp-1000000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-level = <1000000>;
+		};
+
+		core_opp_1050: opp-1050000 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-level = <1050000>;
+		};
+
+		core_opp_1100: opp-1100000 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-level = <1100000>;
+		};
+
+		core_opp_1150: opp-1150000 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-level = <1150000>;
+		};
+
+		core_opp_1200: opp-1200000 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-level = <1200000>;
+		};
+
+		core_opp_1250: opp-1250000 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-level = <1250000>;
+		};
+
+		core_opp_1300: opp-1300000 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-level = <1300000>;
+		};
+
+		core_opp_1350: opp-1350000 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-level = <1350000>;
+		};
+	};
+
+	emc_icc_dvfs_opp_table: opp-table-emc {
+		compatible = "operating-points-v2";
+
+		opp-12750000-950 {
 			opp-microvolt = <950000 950000 1350000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@12750000,1000 {
+		opp-12750000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@12750000,1250 {
+		opp-12750000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@25500000,950 {
+		opp-25500000-950 {
 			opp-microvolt = <950000 950000 1350000>;
 			opp-hz = /bits/ 64 <25500000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@25500000,1000 {
+		opp-25500000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <25500000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@25500000,1250 {
+		opp-25500000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <25500000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@27000000,950 {
+		opp-27000000-950 {
 			opp-microvolt = <950000 950000 1350000>;
 			opp-hz = /bits/ 64 <27000000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@27000000,1000 {
+		opp-27000000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <27000000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@27000000,1250 {
+		opp-27000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <27000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@51000000,950 {
+		opp-51000000-950 {
 			opp-microvolt = <950000 950000 1350000>;
 			opp-hz = /bits/ 64 <51000000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@51000000,1000 {
+		opp-51000000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <51000000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@51000000,1250 {
+		opp-51000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <51000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@54000000,950 {
+		opp-54000000-950 {
 			opp-microvolt = <950000 950000 1350000>;
 			opp-hz = /bits/ 64 <54000000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@54000000,1000 {
+		opp-54000000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <54000000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@54000000,1250 {
+		opp-54000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <54000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@102000000,950 {
+		opp-102000000-950 {
 			opp-microvolt = <950000 950000 1350000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
 		};
 
-		opp@102000000,1000 {
+		opp-102000000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@102000000,1250 {
+		opp-102000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@108000000,1000 {
+		opp-108000000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <108000000>;
 			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@108000000,1250 {
+		opp-108000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <108000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@204000000,1000 {
+		opp-204000000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+			opp-suspend;
 		};
 
-		opp@204000000,1250 {
+		opp-204000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+			opp-suspend;
+		};
+
+		opp-266500000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <266500000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-266500000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <266500000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@333500000,1000 {
+		opp-333500000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <333500000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@333500000,1200 {
+		opp-333500000-1200 {
 			opp-microvolt = <1200000 1200000 1350000>;
 			opp-hz = /bits/ 64 <333500000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@333500000,1250 {
+		opp-333500000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <333500000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@375000000,1000 {
+		opp-375000000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <375000000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@375000000,1200 {
+		opp-375000000-1200 {
 			opp-microvolt = <1200000 1200000 1350000>;
 			opp-hz = /bits/ 64 <375000000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@375000000,1250 {
+		opp-375000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <375000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@400000000,1000 {
+		opp-400000000-1000 {
 			opp-microvolt = <1000000 1000000 1350000>;
 			opp-hz = /bits/ 64 <400000000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
 		};
 
-		opp@400000000,1200 {
+		opp-400000000-1200 {
 			opp-microvolt = <1200000 1200000 1350000>;
 			opp-hz = /bits/ 64 <400000000>;
 			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@400000000,1250 {
+		opp-400000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <400000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@416000000,1200 {
+		opp-416000000-1200 {
 			opp-microvolt = <1200000 1200000 1350000>;
 			opp-hz = /bits/ 64 <416000000>;
 			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@416000000,1250 {
+		opp-416000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <416000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@450000000,1200 {
+		opp-450000000-1200 {
 			opp-microvolt = <1200000 1200000 1350000>;
 			opp-hz = /bits/ 64 <450000000>;
 			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@450000000,1250 {
+		opp-450000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <450000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@533000000,1200 {
+		opp-500000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <500000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-500000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <500000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-533000000-1200 {
 			opp-microvolt = <1200000 1200000 1350000>;
 			opp-hz = /bits/ 64 <533000000>;
 			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@533000000,1250 {
+		opp-533000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <533000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@625000000,1200 {
+		opp-625000000-1200 {
 			opp-microvolt = <1200000 1200000 1350000>;
 			opp-hz = /bits/ 64 <625000000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@625000000,1250 {
+		opp-625000000-1250 {
 			opp-microvolt = <1250000 1250000 1350000>;
 			opp-hz = /bits/ 64 <625000000>;
 			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
 		};
 
-		opp@667000000,1200 {
+		opp-667000000-1200 {
 			opp-microvolt = <1200000 1200000 1350000>;
 			opp-hz = /bits/ 64 <667000000>;
 			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
 		};
 
-		opp@750000000,1300 {
+		opp-750000000-1300 {
 			opp-microvolt = <1300000 1300000 1350000>;
 			opp-hz = /bits/ 64 <750000000>;
 			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
 		};
 
-		opp@800000000,1300 {
+		opp-800000000-1300 {
 			opp-microvolt = <1300000 1300000 1350000>;
 			opp-hz = /bits/ 64 <800000000>;
 			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
 		};
 
-		opp@900000000,1350 {
+		opp-900000000-1350 {
 			opp-microvolt = <1350000 1350000 1350000>;
 			opp-hz = /bits/ 64 <900000000>;
 			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
 		};
 	};
 
-	emc_bw_dfs_opp_table: emc-bandwidth-opp-table {
+	emc_bw_dfs_opp_table: opp-table-actmon {
 		compatible = "operating-points-v2";
 
-		opp@12750000 {
+		opp-12750000 {
 			opp-hz = /bits/ 64 <12750000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <102000>;
 		};
 
-		opp@25500000 {
+		opp-25500000 {
 			opp-hz = /bits/ 64 <25500000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <204000>;
 		};
 
-		opp@27000000 {
+		opp-27000000 {
 			opp-hz = /bits/ 64 <27000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <216000>;
 		};
 
-		opp@51000000 {
+		opp-51000000 {
 			opp-hz = /bits/ 64 <51000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <408000>;
 		};
 
-		opp@54000000 {
+		opp-54000000 {
 			opp-hz = /bits/ 64 <54000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <432000>;
 		};
 
-		opp@102000000 {
+		opp-102000000 {
 			opp-hz = /bits/ 64 <102000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <816000>;
 		};
 
-		opp@108000000 {
+		opp-108000000 {
 			opp-hz = /bits/ 64 <108000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <864000>;
 		};
 
-		opp@204000000 {
+		opp-204000000 {
 			opp-hz = /bits/ 64 <204000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <1632000>;
+			opp-suspend;
+		};
+
+		opp-266500000 {
+			opp-hz = /bits/ 64 <266500000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <2132000>;
 		};
 
-		opp@333500000 {
+		opp-333500000 {
 			opp-hz = /bits/ 64 <333500000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <2668000>;
 		};
 
-		opp@375000000 {
+		opp-375000000 {
 			opp-hz = /bits/ 64 <375000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <3000000>;
 		};
 
-		opp@400000000 {
+		opp-400000000 {
 			opp-hz = /bits/ 64 <400000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <3200000>;
 		};
 
-		opp@416000000 {
+		opp-416000000 {
 			opp-hz = /bits/ 64 <416000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <3328000>;
 		};
 
-		opp@450000000 {
+		opp-450000000 {
 			opp-hz = /bits/ 64 <450000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <3600000>;
 		};
 
-		opp@533000000 {
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-supported-hw = <0x000F>;
+			opp-peak-kBps = <4000000>;
+		};
+
+		opp-533000000 {
 			opp-hz = /bits/ 64 <533000000>;
 			opp-supported-hw = <0x000F>;
 			opp-peak-kBps = <4264000>;
 		};
 
-		opp@625000000 {
+		opp-625000000 {
 			opp-hz = /bits/ 64 <625000000>;
 			opp-supported-hw = <0x000E>;
 			opp-peak-kBps = <5000000>;
 		};
 
-		opp@667000000 {
+		opp-667000000 {
 			opp-hz = /bits/ 64 <667000000>;
 			opp-supported-hw = <0x0006>;
 			opp-peak-kBps = <5336000>;
 		};
 
-		opp@750000000 {
+		opp-750000000 {
 			opp-hz = /bits/ 64 <750000000>;
 			opp-supported-hw = <0x0004>;
 			opp-peak-kBps = <6000000>;
 		};
 
-		opp@800000000 {
+		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 			opp-supported-hw = <0x0004>;
 			opp-peak-kBps = <6400000>;
 		};
 
-		opp@900000000 {
+		opp-900000000 {
 			opp-hz = /bits/ 64 <900000000>;
 			opp-supported-hw = <0x0004>;
 			opp-peak-kBps = <7200000>;
 		};
 	};
+
+	pcie_dvfs_opp_table: opp-table-pcie {
+		compatible = "operating-points-v2";
+
+		opp-250000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <250000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	host1x_dvfs_opp_table: opp-table-host1x {
+		compatible = "operating-points-v2";
+
+		opp-152000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <152000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-188000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <188000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-222000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <222000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-242000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <242000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-254000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <254000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-267000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-300000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	mpe_dvfs_opp_table: opp-table-mpe {
+		compatible = "operating-points-v2";
+
+		opp-234000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <234000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-247000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-361000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-408000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-446000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <446000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	vi_dvfs_opp_table: opp-table-vi {
+		compatible = "operating-points-v2";
+
+		opp-216000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <216000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-219000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <219000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-267000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-300000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-371000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <371000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-409000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <409000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-425000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <425000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-470000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <470000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+	};
+
+	epp_dvfs_opp_table: opp-table-epp {
+		compatible = "operating-points-v2";
+
+		opp-267000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-361000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-408000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-446000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <446000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	gr2d_dvfs_opp_table: opp-table-gr2d {
+		compatible = "operating-points-v2";
+
+		opp-267000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-361000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-408000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-446000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <446000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	gr3d_dvfs_opp_table: opp-table-gr3d {
+		compatible = "operating-points-v2";
+
+		opp-234000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <234000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1000>, <&core_opp_1000>;
+		};
+
+		opp-247000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>, <&core_opp_1000>;
+		};
+
+		opp-285000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <285000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>, <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>, <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>, <&core_opp_1100>;
+		};
+
+		opp-361000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <361000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>, <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>, <&core_opp_1150>;
+		};
+
+		opp-408000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>, <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>, <&core_opp_1200>;
+		};
+
+		opp-446000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <446000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>, <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>, <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>, <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>, <&core_opp_1350>;
+		};
+	};
+
+	disp1_dvfs_opp_table: opp-table-disp1 {
+		compatible = "operating-points-v2";
+
+		opp-120000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <120000000>;
+			opp-supported-hw = <0x0009>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-155000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <155000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0009>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-268000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <268000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1050>;
+		};
+	};
+
+	disp2_dvfs_opp_table: opp-table-disp2 {
+		compatible = "operating-points-v2";
+
+		opp-120000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <120000000>;
+			opp-supported-hw = <0x0009>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-155000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <155000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-190000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <190000000>;
+			opp-supported-hw = <0x0009>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-268000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <268000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1050>;
+		};
+	};
+
+	hdmi_dvfs_opp_table: opp-table-hdmi {
+		compatible = "operating-points-v2";
+
+		opp-148500000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <148500000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	tvo_dvfs_opp_table: opp-table-tvo {
+		compatible = "operating-points-v2";
+
+		opp-297000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <297000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+	};
+
+	dsia_dvfs_opp_table: opp-table-dsia {
+		compatible = "operating-points-v2";
+
+		opp-275000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <275000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	dsib_dvfs_opp_table: opp-table-dsib {
+		compatible = "operating-points-v2";
+
+		opp-275000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <275000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sclk_dvfs_opp_table: opp-table-sclk {
+		compatible = "operating-points-v2";
+
+		opp-51000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <51000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-136000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <136000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-164000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <164000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-191000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <191000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-205000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <205000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-216000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <216000000>;
+			opp-supported-hw = <0x0001>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-227000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <227000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-267000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <267000000>;
+			opp-supported-hw = <0x0006>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-334000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <334000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-378000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <378000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+	};
+
+	pll_c_dvfs_opp_table: opp-table-pllc {
+		compatible = "operating-points-v2";
+
+		opp-533000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <533000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-667000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <667000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-800000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-1066000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <1066000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-1200000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	pll_e_dvfs_opp_table: opp-table-plle {
+		compatible = "operating-points-v2";
+
+		opp-100000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	pll_m_dvfs_opp_table: opp-table-pllm {
+		compatible = "operating-points-v2";
+
+		opp-533000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <533000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-667000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <667000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-800000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-1066000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <1066000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	vde_dvfs_opp_table: opp-table-vde {
+		compatible = "operating-points-v2";
+
+		opp-228000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <228000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-247000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <247000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-275000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <275000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-304000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <304000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-332000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <332000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-352000000-1100 {
+			opp-microvolt = <1100000 1100000 1350000>;
+			opp-hz = /bits/ 64 <352000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1100>;
+		};
+
+		opp-380000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <380000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-400000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1150>;
+		};
+
+		opp-416000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <416000000>;
+			opp-supported-hw = <0x0003>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-437000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <437000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1200>;
+		};
+
+		opp-484000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <484000000>;
+			opp-supported-hw = <0x000C>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-520000000-1300 {
+			opp-microvolt = <1300000 1300000 1350000>;
+			opp-hz = /bits/ 64 <520000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1300>;
+		};
+
+		opp-600000000-1350 {
+			opp-microvolt = <1350000 1350000 1350000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+			required-opps = <&core_opp_1350>;
+		};
+	};
+
+	fuse_burn_dvfs_opp_table: opp-table-fuseburn {
+		compatible = "operating-points-v2";
+
+		opp-26000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <26000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1150>;
+		};
+	};
+
+	nor_dvfs_opp_table: opp-table-nor {
+		compatible = "operating-points-v2";
+
+		opp-108000000-1250 {
+			opp-microvolt = <1250000 1250000 1350000>;
+			opp-hz = /bits/ 64 <108000000>;
+			opp-supported-hw = <0x0008>;
+			required-opps = <&core_opp_1250>;
+		};
+
+		opp-115000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <115000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-130000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <130000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-133000000-1150 {
+			opp-microvolt = <1150000 1150000 1350000>;
+			opp-hz = /bits/ 64 <133000000>;
+			opp-supported-hw = <0x0007>;
+			required-opps = <&core_opp_1150>;
+		};
+	};
+
+	pwm_dvfs_opp_table: opp-table-pwm {
+		compatible = "operating-points-v2";
+
+		opp-408000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <408000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	sbc1_dvfs_opp_table: opp-table-sbc1 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc2_dvfs_opp_table: opp-table-sbc2 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc3_dvfs_opp_table: opp-table-sbc3 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc4_dvfs_opp_table: opp-table-sbc4 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc5_dvfs_opp_table: opp-table-sbc5 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sbc6_dvfs_opp_table: opp-table-sbc6 {
+		compatible = "operating-points-v2";
+
+		opp-52000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <52000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+
+		opp-60000000-1050 {
+			opp-microvolt = <1050000 1050000 1350000>;
+			opp-hz = /bits/ 64 <60000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1050>;
+		};
+
+		opp-100000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <100000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sdmmc1_dvfs_opp_table: opp-table-sdmmc1 {
+		compatible = "operating-points-v2";
+
+		opp-104000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <104000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-208000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <208000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	sdmmc3_dvfs_opp_table: opp-table-sdmmc3 {
+		compatible = "operating-points-v2";
+
+		opp-104000000-950 {
+			opp-microvolt = <950000 950000 1350000>;
+			opp-hz = /bits/ 64 <104000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_950>;
+		};
+
+		opp-208000000-1200 {
+			opp-microvolt = <1200000 1200000 1350000>;
+			opp-hz = /bits/ 64 <208000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1200>;
+		};
+	};
+
+	usbd_dvfs_opp_table: opp-table-usbd {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	usb2_dvfs_opp_table: opp-table-usb2 {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
+
+	usb3_dvfs_opp_table: opp-table-usb3 {
+		compatible = "operating-points-v2";
+
+		opp-480000000-1000 {
+			opp-microvolt = <1000000 1000000 1350000>;
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0x000F>;
+			required-opps = <&core_opp_1000>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 44a6dbba7081..9cba67b54111 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -5,6 +5,7 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/soc/tegra-pmc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 #include "tegra30-peripherals-opp.dtsi"
 
@@ -54,6 +55,8 @@
 			 <&tegra_car 72>,
 			 <&tegra_car 74>;
 		reset-names = "pex", "afi", "pcie_x";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&pcie_dvfs_opp_table>;
 		status = "disabled";
 
 		pci@1,0 {
@@ -120,9 +123,11 @@
 		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
 		clock-names = "host1x";
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA30_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
 		iommus = <&mc TEGRA_SWGROUP_HC>;
+		power-domains = <&pd_heg>;
+		operating-points-v2 = <&host1x_dvfs_opp_table>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -136,8 +141,12 @@
 			clocks = <&tegra_car TEGRA30_CLK_MPE>;
 			resets = <&tegra_car 60>;
 			reset-names = "mpe";
+			power-domains = <&pd_mpe>;
+			operating-points-v2 = <&mpe_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_MPE>;
+
+			status = "disabled";
 		};
 
 		vi@54080000 {
@@ -147,8 +156,12 @@
 			clocks = <&tegra_car TEGRA30_CLK_VI>;
 			resets = <&tegra_car 20>;
 			reset-names = "vi";
+			power-domains = <&pd_venc>;
+			operating-points-v2 = <&vi_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_VI>;
+
+			status = "disabled";
 		};
 
 		epp@540c0000 {
@@ -158,8 +171,12 @@
 			clocks = <&tegra_car TEGRA30_CLK_EPP>;
 			resets = <&tegra_car 19>;
 			reset-names = "epp";
+			power-domains = <&pd_heg>;
+			operating-points-v2 = <&epp_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_EPP>;
+
+			status = "disabled";
 		};
 
 		isp@54100000 {
@@ -169,8 +186,11 @@
 			clocks = <&tegra_car TEGRA30_CLK_ISP>;
 			resets = <&tegra_car 23>;
 			reset-names = "isp";
+			power-domains = <&pd_venc>;
 
 			iommus = <&mc TEGRA_SWGROUP_ISP>;
+
+			status = "disabled";
 		};
 
 		gr2d@54140000 {
@@ -178,8 +198,10 @@
 			reg = <0x54140000 0x00040000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA30_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
+			resets = <&tegra_car 21>, <&mc TEGRA30_MC_RESET_2D>;
+			reset-names = "2d", "mc";
+			power-domains = <&pd_heg>;
+			operating-points-v2 = <&gr2d_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_G2>;
 		};
@@ -191,8 +213,13 @@
 				 <&tegra_car TEGRA30_CLK_GR3D2>;
 			clock-names = "3d", "3d2";
 			resets = <&tegra_car 24>,
-				 <&tegra_car 98>;
-			reset-names = "3d", "3d2";
+				 <&tegra_car 98>,
+				 <&mc TEGRA30_MC_RESET_3D>,
+				 <&mc TEGRA30_MC_RESET_3D2>;
+			reset-names = "3d", "3d2", "mc", "mc2";
+			power-domains = <&pd_3d0>, <&pd_3d1>;
+			power-domain-names = "3d0", "3d1";
+			operating-points-v2 = <&gr3d_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_NV>,
 				 <&mc TEGRA_SWGROUP_NV2>;
@@ -207,6 +234,8 @@
 			clock-names = "dc", "parent";
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&disp1_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_DC>;
 
@@ -237,6 +266,8 @@
 			clock-names = "dc", "parent";
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&disp2_dvfs_opp_table>;
 
 			iommus = <&mc TEGRA_SWGROUP_DCB>;
 
@@ -267,6 +298,8 @@
 			clock-names = "hdmi", "parent";
 			resets = <&tegra_car 51>;
 			reset-names = "hdmi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&hdmi_dvfs_opp_table>;
 			status = "disabled";
 		};
 
@@ -275,6 +308,8 @@
 			reg = <0x542c0000 0x00040000>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA30_CLK_TVO>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&tvo_dvfs_opp_table>;
 			status = "disabled";
 		};
 
@@ -286,6 +321,8 @@
 			clock-names = "dsi", "parent";
 			resets = <&tegra_car 48>;
 			reset-names = "dsi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&dsia_dvfs_opp_table>;
 			status = "disabled";
 		};
 
@@ -297,6 +334,8 @@
 			clock-names = "dsi", "parent";
 			resets = <&tegra_car 84>;
 			reset-names = "dsi";
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&dsib_dvfs_opp_table>;
 			status = "disabled";
 		};
 	};
@@ -357,6 +396,34 @@
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
+
+		pll-c {
+			compatible = "nvidia,tegra30-pllc";
+			clocks = <&tegra_car TEGRA30_CLK_PLL_C>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&pll_c_dvfs_opp_table>;
+		};
+
+		pll-e {
+			compatible = "nvidia,tegra30-plle";
+			clocks = <&tegra_car TEGRA30_CLK_PLL_E>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&pll_e_dvfs_opp_table>;
+		};
+
+		pll-m {
+			compatible = "nvidia,tegra30-pllm";
+			clocks = <&tegra_car TEGRA30_CLK_PLL_M>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&pll_m_dvfs_opp_table>;
+		};
+
+		sclk {
+			compatible = "nvidia,tegra30-sclk";
+			clocks = <&tegra_car TEGRA30_CLK_SCLK>;
+			power-domains = <&pd_core>;
+			operating-points-v2 = <&sclk_dvfs_opp_table>;
+		};
 	};
 
 	flow-controller@60007000 {
@@ -410,7 +477,7 @@
 		reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */
 	};
 
-	actmon@6000c800 {
+	actmon: actmon@6000c800 {
 		compatible = "nvidia,tegra30-actmon";
 		reg = <0x6000c800 0x400>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -422,6 +489,7 @@
 		operating-points-v2 = <&emc_bw_dfs_opp_table>;
 		interconnects = <&mc TEGRA30_MC_MPCORER &emc>;
 		interconnect-names = "cpu-read";
+		#cooling-cells = <2>;
 	};
 
 	gpio: gpio@6000d000 {
@@ -439,9 +507,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
-		/*
 		gpio-ranges = <&pinmux 0 0 248>;
-		*/
 	};
 
 	vde@6001a000 {
@@ -466,6 +532,8 @@
 		reset-names = "vde", "mc";
 		resets = <&tegra_car 61>, <&mc TEGRA30_MC_RESET_VDE>;
 		iommus = <&mc TEGRA_SWGROUP_VDE>;
+		power-domains = <&pd_vde>;
+		operating-points-v2 = <&vde_dvfs_opp_table>;
 	};
 
 	apbmisc@70000800 {
@@ -563,6 +631,8 @@
 		clock-names = "gmi";
 		resets = <&tegra_car 42>;
 		reset-names = "gmi";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&nor_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -573,16 +643,11 @@
 		clocks = <&tegra_car TEGRA30_CLK_PWM>;
 		resets = <&tegra_car 17>;
 		reset-names = "pwm";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&pwm_dvfs_opp_table>;
 		status = "disabled";
 	};
 
-	rtc@7000e000 {
-		compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
-		reg = <0x7000e000 0x100>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&tegra_car TEGRA30_CLK_RTC>;
-	};
-
 	i2c@7000c000 {
 		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
 		reg = <0x7000c000 0x100>;
@@ -664,7 +729,7 @@
 	};
 
 	spi@7000d400 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000d400 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -674,11 +739,13 @@
 		reset-names = "spi";
 		dmas = <&apbdma 15>, <&apbdma 15>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc1_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	spi@7000d600 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000d600 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -688,11 +755,13 @@
 		reset-names = "spi";
 		dmas = <&apbdma 16>, <&apbdma 16>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc2_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	spi@7000d800 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000d800 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -702,11 +771,13 @@
 		reset-names = "spi";
 		dmas = <&apbdma 17>, <&apbdma 17>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc3_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	spi@7000da00 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000da00 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -716,11 +787,13 @@
 		reset-names = "spi";
 		dmas = <&apbdma 18>, <&apbdma 18>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc4_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	spi@7000dc00 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000dc00 0x200>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -730,11 +803,13 @@
 		reset-names = "spi";
 		dmas = <&apbdma 27>, <&apbdma 27>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc5_dvfs_opp_table>;
 		status = "disabled";
 	};
 
 	spi@7000de00 {
-		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		compatible = "nvidia,tegra30-slink";
 		reg = <0x7000de00 0x200>;
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -744,9 +819,18 @@
 		reset-names = "spi";
 		dmas = <&apbdma 28>, <&apbdma 28>;
 		dma-names = "rx", "tx";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sbc6_dvfs_opp_table>;
 		status = "disabled";
 	};
 
+	rtc@7000e000 {
+		compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_RTC>;
+	};
+
 	kbc@7000e200 {
 		compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc";
 		reg = <0x7000e200 0x100>;
@@ -763,6 +847,72 @@
 		clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
 		#clock-cells = <1>;
+
+		pd_core: core-domain {
+			#power-domain-cells = <0>;
+			operating-points-v2 = <&core_opp_table>;
+		};
+
+		powergates {
+			pd_heg: heg {
+				clocks = <&tegra_car TEGRA30_CLK_GR2D>,
+					 <&tegra_car TEGRA30_CLK_EPP>,
+					 <&tegra_car TEGRA30_CLK_HOST1X>;
+				resets = <&mc TEGRA30_MC_RESET_2D>,
+					 <&mc TEGRA30_MC_RESET_EPP>,
+					 <&mc TEGRA30_MC_RESET_HC>,
+					 <&tegra_car TEGRA30_CLK_GR2D>,
+					 <&tegra_car TEGRA30_CLK_EPP>,
+					 <&tegra_car TEGRA30_CLK_HOST1X>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_mpe: mpe {
+				clocks = <&tegra_car TEGRA30_CLK_MPE>;
+				resets = <&mc TEGRA30_MC_RESET_MPE>,
+					 <&tegra_car TEGRA30_CLK_MPE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_3d0: td {
+				clocks = <&tegra_car TEGRA30_CLK_GR3D>;
+				resets = <&mc TEGRA30_MC_RESET_3D>,
+					 <&tegra_car TEGRA30_CLK_GR3D>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_3d1: td2 {
+				clocks = <&tegra_car TEGRA30_CLK_GR3D2>;
+				resets = <&mc TEGRA30_MC_RESET_3D2>,
+					 <&tegra_car TEGRA30_CLK_GR3D2>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_vde: vdec {
+				clocks = <&tegra_car TEGRA30_CLK_VDE>;
+				resets = <&mc TEGRA30_MC_RESET_VDE>,
+					 <&tegra_car TEGRA30_CLK_VDE>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_venc: venc {
+				clocks = <&tegra_car TEGRA30_CLK_ISP>,
+					 <&tegra_car TEGRA30_CLK_VI>,
+					 <&tegra_car TEGRA30_CLK_CSI>;
+				resets = <&mc TEGRA30_MC_RESET_ISP>,
+					 <&mc TEGRA30_MC_RESET_VI>,
+					 <&tegra_car TEGRA30_CLK_ISP>,
+					 <&tegra_car 20 /* VI */>,
+					 <&tegra_car TEGRA30_CLK_CSI>;
+				power-domains = <&pd_core>;
+				#power-domain-cells = <0>;
+			};
+		};
 	};
 
 	mc: memory-controller@7000f000 {
@@ -783,6 +933,7 @@
 		reg = <0x7000f400 0x400>;
 		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_EMC>;
+		power-domains = <&pd_core>;
 
 		nvidia,memory-controller = <&mc>;
 		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
@@ -797,6 +948,22 @@
 		clock-names = "fuse";
 		resets = <&tegra_car 39>;
 		reset-names = "fuse";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&fuse_burn_dvfs_opp_table>;
+	};
+
+	tsensor: tsensor@70014000 {
+		compatible = "nvidia,tegra30-tsensor";
+		reg = <0x70014000 0x500>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_TSENSOR>;
+		resets = <&tegra_car TEGRA30_CLK_TSENSOR>;
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_TSENSOR>;
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_CLK_M>;
+		assigned-clock-rates = <500000>;
+
+		#thermal-sensor-cells = <1>;
 	};
 
 	hda@70030000 {
@@ -905,6 +1072,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc1_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -927,6 +1096,8 @@
 		clock-names = "sdhci";
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&sdmmc3_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -942,7 +1113,7 @@
 	};
 
 	usb@7d000000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra30-ehci";
 		reg = <0x7d000000 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -951,6 +1122,8 @@
 		reset-names = "usb";
 		nvidia,needs-double-reset;
 		nvidia,phy = <&phy1>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usbd_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -958,6 +1131,7 @@
 		compatible = "nvidia,tegra30-usb-phy";
 		reg = <0x7d000000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USBD>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -978,11 +1152,12 @@
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
 		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
 		status = "disabled";
 	};
 
 	usb@7d004000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra30-ehci";
 		reg = <0x7d004000 0x4000>;
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -990,6 +1165,8 @@
 		resets = <&tegra_car 58>;
 		reset-names = "usb";
 		nvidia,phy = <&phy2>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usb2_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -997,6 +1174,7 @@
 		compatible = "nvidia,tegra30-usb-phy";
 		reg = <0x7d004000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USB2>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1016,11 +1194,12 @@
 		nvidia,xcvr-hsslew = <32>;
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
+		nvidia,pmc = <&tegra_pmc 2>;
 		status = "disabled";
 	};
 
 	usb@7d008000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra30-ehci";
 		reg = <0x7d008000 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -1028,6 +1207,8 @@
 		resets = <&tegra_car 59>;
 		reset-names = "usb";
 		nvidia,phy = <&phy3>;
+		power-domains = <&pd_core>;
+		operating-points-v2 = <&usb3_dvfs_opp_table>;
 		status = "disabled";
 	};
 
@@ -1035,6 +1216,7 @@
 		compatible = "nvidia,tegra30-usb-phy";
 		reg = <0x7d008000 0x4000>,
 		      <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USB3>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1054,6 +1236,7 @@
 		nvidia,xcvr-hsslew = <32>;
 		nvidia,hssquelch-level = <2>;
 		nvidia,hsdiscon-level = <5>;
+		nvidia,pmc = <&tegra_pmc 1>;
 		status = "disabled";
 	};
 
@@ -1061,32 +1244,36 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
 			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <2>;
 			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <3>;
 			clocks = <&tegra_car TEGRA30_CLK_CCLK_G>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -1096,9 +1283,66 @@
 			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&{/cpus/cpu@0}>,
-				     <&{/cpus/cpu@1}>,
-				     <&{/cpus/cpu@2}>,
-				     <&{/cpus/cpu@3}>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	thermal-zones {
+		tsensor0-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsensor 0>;
+
+			trips {
+				level1_trip: dvfs-alert {
+					/* throttle at 80C until temperature drops to 79.8C */
+					temperature = <80000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				level2_trip: cpu-div2-throttle {
+					/* hardware CPU x2 freq throttle at 85C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "hot";
+				};
+
+				level3_trip: soc-critical {
+					/* hardware shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&level1_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&actmon THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		tsensor1-thermal {
+			status = "disabled";
+
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <0>; /* milliseconds */
+
+			thermal-sensors = <&tsensor 1>;
+
+			trips {
+				dvfs-alert {
+					temperature = <80000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts
index c46c2e8a10a7..e007db084787 100644
--- a/arch/arm/boot/dts/uniphier-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts
@@ -36,11 +36,11 @@
 };
 
 &ethsc {
-	interrupts = <1 8>;
+	interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serialsc {
-	interrupts = <1 8>;
+	interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serial0 {
@@ -56,7 +56,7 @@
 };
 
 &gpio {
-	xirq1 {
+	xirq1-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(1) 0>;
 		input;
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index b52957ccda0d..df2de7a40211 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -6,6 +6,7 @@
 //   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 
 #include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "socionext,uniphier-ld4";
@@ -55,7 +56,8 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
 			      <0x506c0000 0x400>;
-			interrupts = <0 174 4>, <0 175 4>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(512 * 1024)>;
 			cache-sets = <256>;
@@ -69,7 +71,7 @@
 			reg = <0x54006000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 39 4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
 			clocks = <&peri_clk 11>;
@@ -80,7 +82,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
@@ -91,7 +93,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
@@ -102,7 +104,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
@@ -113,7 +115,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006b00 0x40>;
-			interrupts = <0 29 4>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
@@ -140,7 +142,7 @@
 			reg = <0x58400000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 41 1>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
@@ -154,7 +156,7 @@
 			reg = <0x58480000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 42 1>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
@@ -168,7 +170,7 @@
 			reg = <0x58500000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 43 1>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&peri_clk 6>;
@@ -182,7 +184,7 @@
 			reg = <0x58580000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 44 1>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
@@ -205,33 +207,33 @@
 			reg = <0x59801000 0x400>;
 		};
 
-		mioctrl@59810000 {
+		syscon@59810000 {
 			compatible = "socionext,uniphier-ld4-mioctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59810000 0x800>;
 
-			mio_clk: clock {
+			mio_clk: clock-controller {
 				compatible = "socionext,uniphier-ld4-mio-clock";
 				#clock-cells = <1>;
 			};
 
-			mio_rst: reset {
+			mio_rst: reset-controller {
 				compatible = "socionext,uniphier-ld4-mio-reset";
 				#reset-cells = <1>;
 			};
 		};
 
-		perictrl@59820000 {
+		syscon@59820000 {
 			compatible = "socionext,uniphier-ld4-perictrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59820000 0x200>;
 
-			peri_clk: clock {
+			peri_clk: clock-controller {
 				compatible = "socionext,uniphier-ld4-peri-clock";
 				#clock-cells = <1>;
 			};
 
-			peri_rst: reset {
+			peri_rst: reset-controller {
 				compatible = "socionext,uniphier-ld4-peri-reset";
 				#reset-cells = <1>;
 			};
@@ -240,8 +242,13 @@
 		dmac: dma-controller@5a000000 {
 			compatible = "socionext,uniphier-mio-dmac";
 			reg = <0x5a000000 0x1000>;
-			interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
-				     <0 71 4>, <0 72 4>, <0 73 4>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&mio_clk 7>;
 			resets = <&mio_rst 7>;
 			#dma-cells = <1>;
@@ -251,7 +258,7 @@
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a400000 0x200>;
-			interrupts = <0 76 4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default", "uhs";
 			pinctrl-0 = <&pinctrl_sd>;
 			pinctrl-1 = <&pinctrl_sd_uhs>;
@@ -271,7 +278,7 @@
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
-			interrupts = <0 78 4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&mio_clk 1>;
@@ -289,7 +296,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a800100 0x100>;
-			interrupts = <0 80 4>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
@@ -303,7 +310,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a810100 0x100>;
-			interrupts = <0 81 4>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
@@ -317,7 +324,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a820100 0x100>;
-			interrupts = <0 82 4>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb2>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
@@ -327,7 +334,7 @@
 			has-transaction-translator;
 		};
 
-		soc-glue@5f800000 {
+		syscon@5f800000 {
 			compatible = "socionext,uniphier-ld4-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
@@ -337,9 +344,10 @@
 			};
 		};
 
-		soc-glue@5f900000 {
+		syscon@5f900000 {
 			compatible = "socionext,uniphier-ld4-soc-glue-debug",
-				     "simple-mfd";
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x5f900000 0x2000>;
@@ -358,14 +366,16 @@
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x104>;
+			interrupts = <GIC_PPI 11
+				(GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
 		timer@60000600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x104>;
+			interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
@@ -384,17 +394,17 @@
 			#interrupt-cells = <2>;
 		};
 
-		sysctrl@61840000 {
+		syscon@61840000 {
 			compatible = "socionext,uniphier-ld4-sysctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x61840000 0x10000>;
 
-			sys_clk: clock {
+			sys_clk: clock-controller {
 				compatible = "socionext,uniphier-ld4-clock";
 				#clock-cells = <1>;
 			};
 
-			sys_rst: reset {
+			sys_rst: reset-controller {
 				compatible = "socionext,uniphier-ld4-reset";
 				#reset-cells = <1>;
 			};
@@ -407,7 +417,7 @@
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 65 4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
index 5bc7fe11b517..223a78b4a761 100644
--- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
@@ -40,11 +40,11 @@
 };
 
 &ethsc {
-	interrupts = <4 8>;
+	interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serialsc {
-	interrupts = <4 8>;
+	interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serial0 {
@@ -60,7 +60,7 @@
 };
 
 &gpio {
-	xirq4 {
+	xirq4-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(4) 0>;
 		input;
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
index c0fd029b37e5..f909ec2e5333 100644
--- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -196,11 +196,21 @@
 		function = "usb0";
 	};
 
+	pinctrl_usb0_device: usb0-device {
+		groups = "usb0_device";
+		function = "usb0";
+	};
+
 	pinctrl_usb1: usb1 {
 		groups = "usb1";
 		function = "usb1";
 	};
 
+	pinctrl_usb1_device: usb1-device {
+		groups = "usb1_device";
+		function = "usb1";
+	};
+
 	pinctrl_usb2: usb2 {
 		groups = "usb2";
 		function = "usb2";
diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts
index 27ff2b7b9d0e..6baee4410d9c 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ace.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts
@@ -99,3 +99,11 @@
 &usb1 {
 	status = "okay";
 };
+
+&ahci0 {
+	status = "okay";
+};
+
+&ahci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts
index 3b9b61314d01..d2ce5c039865 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts
@@ -39,11 +39,11 @@
 };
 
 &ethsc {
-	interrupts = <2 8>;
+	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serialsc {
-	interrupts = <2 8>;
+	interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serial0 {
@@ -59,7 +59,7 @@
 };
 
 &gpio {
-	xirq2 {
+	xirq2-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(2) 0>;
 		input;
@@ -108,3 +108,11 @@
 		reg = <0>;
 	};
 };
+
+&ahci0 {
+	status = "okay";
+};
+
+&ahci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index a53b73ee93e9..ba55af30e904 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -6,6 +6,7 @@
 //   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 
 #include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "socionext,uniphier-pro4";
@@ -63,7 +64,8 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
 			      <0x506c0000 0x400>;
-			interrupts = <0 174 4>, <0 175 4>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(768 * 1024)>;
 			cache-sets = <256>;
@@ -77,7 +79,7 @@
 			reg = <0x54006000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 39 4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
 			clocks = <&peri_clk 11>;
@@ -88,7 +90,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
@@ -99,7 +101,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
@@ -110,7 +112,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
@@ -121,7 +123,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006b00 0x40>;
-			interrupts = <0 177 4>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
@@ -148,7 +150,7 @@
 			reg = <0x58780000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 41 4>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
@@ -162,7 +164,7 @@
 			reg = <0x58781000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 42 4>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
@@ -176,7 +178,7 @@
 			reg = <0x58782000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 43 4>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&peri_clk 6>;
@@ -190,7 +192,7 @@
 			reg = <0x58783000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 44 4>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
@@ -206,7 +208,7 @@
 			reg = <0x58785000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 25 4>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 9>;
 			resets = <&peri_rst 9>;
 			clock-frequency = <400000>;
@@ -218,7 +220,7 @@
 			reg = <0x58786000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 26 4>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 10>;
 			resets = <&peri_rst 10>;
 			clock-frequency = <400000>;
@@ -239,33 +241,33 @@
 			reg = <0x59801000 0x400>;
 		};
 
-		mioctrl@59810000 {
+		mioctrl: syscon@59810000 {
 			compatible = "socionext,uniphier-pro4-mioctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59810000 0x800>;
 
-			mio_clk: clock {
+			mio_clk: clock-controller {
 				compatible = "socionext,uniphier-pro4-mio-clock";
 				#clock-cells = <1>;
 			};
 
-			mio_rst: reset {
+			mio_rst: reset-controller {
 				compatible = "socionext,uniphier-pro4-mio-reset";
 				#reset-cells = <1>;
 			};
 		};
 
-		perictrl@59820000 {
+		syscon@59820000 {
 			compatible = "socionext,uniphier-pro4-perictrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59820000 0x200>;
 
-			peri_clk: clock {
+			peri_clk: clock-controller {
 				compatible = "socionext,uniphier-pro4-peri-clock";
 				#clock-cells = <1>;
 			};
 
-			peri_rst: reset {
+			peri_rst: reset-controller {
 				compatible = "socionext,uniphier-pro4-peri-reset";
 				#reset-cells = <1>;
 			};
@@ -274,8 +276,14 @@
 		dmac: dma-controller@5a000000 {
 			compatible = "socionext,uniphier-mio-dmac";
 			reg = <0x5a000000 0x1000>;
-			interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
-				     <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&mio_clk 7>;
 			resets = <&mio_rst 7>;
 			#dma-cells = <1>;
@@ -285,7 +293,7 @@
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a400000 0x200>;
-			interrupts = <0 76 4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default", "uhs";
 			pinctrl-0 = <&pinctrl_sd>;
 			pinctrl-1 = <&pinctrl_sd_uhs>;
@@ -299,13 +307,14 @@
 			sd-uhs-sdr12;
 			sd-uhs-sdr25;
 			sd-uhs-sdr50;
+			socionext,syscon-uhs-mode = <&mioctrl 0>;
 		};
 
 		emmc: mmc@5a500000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
-			interrupts = <0 78 4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&mio_clk 1>;
@@ -323,7 +332,7 @@
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a600000 0x200>;
-			interrupts = <0 85 4>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sd1>;
 			clocks = <&mio_clk 2>;
@@ -339,7 +348,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a800100 0x100>;
-			interrupts = <0 80 4>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb2>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
@@ -355,7 +364,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a810100 0x100>;
-			interrupts = <0 81 4>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb3>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
@@ -367,7 +376,7 @@
 			has-transaction-translator;
 		};
 
-		soc_glue: soc-glue@5f800000 {
+		soc_glue: syscon@5f800000 {
 			compatible = "socionext,uniphier-pro4-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
@@ -376,7 +385,7 @@
 				compatible = "socionext,uniphier-pro4-pinctrl";
 			};
 
-			usb-phy {
+			usb-hub {
 				compatible = "socionext,uniphier-pro4-usb2-phy";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -403,11 +412,17 @@
 					vbus-supply = <&usb1_vbus>;
 				};
 			};
+
+			sg_clk: clock-controller {
+				compatible = "socionext,uniphier-pro4-sg-clock";
+				#clock-cells = <1>;
+			};
 		};
 
-		soc-glue@5f900000 {
+		syscon@5f900000 {
 			compatible = "socionext,uniphier-pro4-soc-glue-debug",
-				     "simple-mfd";
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x5f900000 0x2000>;
@@ -431,7 +446,7 @@
 		xdmac: dma-controller@5fc10000 {
 			compatible = "socionext,uniphier-xdmac";
 			reg = <0x5fc10000 0x5300>;
-			interrupts = <0 188 4>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 			dma-channels = <16>;
 			#dma-cells = <2>;
 		};
@@ -446,14 +461,16 @@
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x304>;
+			interrupts = <GIC_PPI 11
+				(GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
 		timer@60000600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x304>;
+			interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
@@ -465,17 +482,17 @@
 			interrupt-controller;
 		};
 
-		sysctrl@61840000 {
+		syscon@61840000 {
 			compatible = "socionext,uniphier-pro4-sysctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x61840000 0x10000>;
 
-			sys_clk: clock {
+			sys_clk: clock-controller {
 				compatible = "socionext,uniphier-pro4-clock";
 				#clock-cells = <1>;
 			};
 
-			sys_rst: reset {
+			sys_rst: reset-controller {
 				compatible = "socionext,uniphier-pro4-reset";
 				#reset-cells = <1>;
 			};
@@ -485,7 +502,7 @@
 			compatible = "socionext,uniphier-pro4-ave4";
 			status = "disabled";
 			reg = <0x65000000 0x8500>;
-			interrupts = <0 66 4>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_ether_rgmii>;
 			clock-names = "gio", "ether", "ether-gb", "ether-phy";
@@ -503,12 +520,107 @@
 			};
 		};
 
+		ahci0: sata@65600000 {
+			compatible = "socionext,uniphier-pro4-ahci",
+				     "generic-ahci";
+			status = "disabled";
+			reg = <0x65600000 0x10000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_clk 12>, <&sys_clk 28>;
+			resets = <&sys_rst 12>, <&sys_rst 28>, <&ahci0_rst 3>;
+			ports-implemented = <1>;
+			phys = <&ahci0_phy>;
+			assigned-clocks = <&sg_clk 0>;
+			assigned-clock-rates = <25000000>;
+		};
+
+		sata-controller@65700000 {
+			compatible = "socionext,uniphier-pxs2-ahci-glue",
+				     "simple-mfd";
+			reg = <0x65700000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65700000 0x100>;
+
+			ahci0_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pro4-ahci-reset";
+				reg = <0x0 0x4>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 28>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 28>;
+				#reset-cells = <1>;
+			};
+
+			ahci0_phy: phy@10 {
+				compatible = "socionext,uniphier-pro4-ahci-phy";
+				reg = <0x10 0x40>;
+				clock-names = "link", "gio";
+				clocks = <&sys_clk 28>, <&sys_clk 12>;
+				reset-names = "link", "gio", "phy",
+					      "pm", "tx", "rx";
+				resets = <&sys_rst 28>, <&sys_rst 12>,
+					 <&sys_rst 30>,
+					 <&ahci0_rst 0>, <&ahci0_rst 1>,
+					 <&ahci0_rst 2>;
+				#phy-cells = <0>;
+			};
+		};
+
+		ahci1: sata@65800000 {
+			compatible = "socionext,uniphier-pro4-ahci",
+				     "generic-ahci";
+			status = "disabled";
+			reg = <0x65800000 0x10000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_clk 12>, <&sys_clk 29>;
+			resets = <&sys_rst 12>, <&sys_rst 29>, <&ahci1_rst 3>;
+			ports-implemented = <1>;
+			phys = <&ahci1_phy>;
+			assigned-clocks = <&sg_clk 0>;
+			assigned-clock-rates = <25000000>;
+		};
+
+		sata-controller@65900000 {
+			compatible = "socionext,uniphier-pro4-ahci-glue",
+				     "simple-mfd";
+			reg = <0x65900000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65900000 0x100>;
+
+			ahci1_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pro4-ahci-reset";
+				reg = <0x0 0x4>;
+				clock-names = "gio", "link";
+				clocks = <&sys_clk 12>, <&sys_clk 29>;
+				reset-names = "gio", "link";
+				resets = <&sys_rst 12>, <&sys_rst 29>;
+				#reset-cells = <1>;
+			};
+
+			ahci1_phy: phy@10 {
+				compatible = "socionext,uniphier-pro4-ahci-phy";
+				reg = <0x10 0x40>;
+				clock-names = "link", "gio";
+				clocks = <&sys_clk 29>, <&sys_clk 12>;
+				reset-names = "link", "gio", "phy",
+					      "pm", "tx", "rx";
+				resets = <&sys_rst 29>, <&sys_rst 12>,
+					 <&sys_rst 30>,
+					 <&ahci1_rst 0>, <&ahci1_rst 1>,
+					 <&ahci1_rst 2>;
+				#phy-cells = <0>;
+			};
+		};
+
 		usb0: usb@65a00000 {
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65a00000 0xcd00>;
 			interrupt-names = "host", "peripheral";
-			interrupts = <0 134 4>, <0 135 4>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -518,9 +630,10 @@
 			dr_mode = "host";
 		};
 
-		usb-glue@65b00000 {
+		usb-controller@65b00000 {
 			compatible = "socionext,uniphier-pro4-dwc3-glue",
 				     "simple-mfd";
+			reg = <0x65b00000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x65b00000 0x100>;
@@ -534,7 +647,7 @@
 				resets = <&sys_rst 12>, <&sys_rst 14>;
 			};
 
-			usb0_ssphy: ss-phy@10 {
+			usb0_ssphy: phy@10 {
 				compatible = "socionext,uniphier-pro4-usb3-ssphy";
 				reg = <0x10 0x10>;
 				#phy-cells = <0>;
@@ -545,7 +658,7 @@
 				vbus-supply = <&usb0_vbus>;
 			};
 
-			usb0_rst: reset@40 {
+			usb0_rst: reset-controller@40 {
 				compatible = "socionext,uniphier-pro4-usb3-reset";
 				reg = <0x40 0x4>;
 				#reset-cells = <1>;
@@ -561,7 +674,8 @@
 			status = "disabled";
 			reg = <0x65c00000 0xcd00>;
 			interrupt-names = "host", "peripheral";
-			interrupts = <0 137 4>, <0 138 4>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -571,9 +685,10 @@
 			dr_mode = "host";
 		};
 
-		usb-glue@65d00000 {
+		usb-controller@65d00000 {
 			compatible = "socionext,uniphier-pro4-dwc3-glue",
 				     "simple-mfd";
+			reg = <0x65d00000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x65d00000 0x100>;
@@ -587,7 +702,7 @@
 				resets = <&sys_rst 12>, <&sys_rst 15>;
 			};
 
-			usb1_rst: reset@40 {
+			usb1_rst: reset-controller@40 {
 				compatible = "socionext,uniphier-pro4-usb3-reset";
 				reg = <0x40 0x4>;
 				#reset-cells = <1>;
@@ -605,7 +720,7 @@
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 65 4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
diff --git a/arch/arm/boot/dts/uniphier-pro5-epcore.dts b/arch/arm/boot/dts/uniphier-pro5-epcore.dts
new file mode 100644
index 000000000000..ed759dcc3216
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pro5-epcore.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Source for UniPhier Pro5 EP-CORE Board (Pro5-PCIe_EP-CORE)
+ *
+ * Copyright (C) 2021 Socionext Inc.
+ *   Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ */
+
+/dts-v1/;
+#include "uniphier-pro5.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier Pro5 EP-CORE Board";
+	compatible = "socionext,uniphier-pro5-epcore", "socionext,uniphier-pro5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serialsc {
+	interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&pcie_ep {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro5-proex.dts b/arch/arm/boot/dts/uniphier-pro5-proex.dts
new file mode 100644
index 000000000000..2cfb84f73cc0
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-pro5-proex.dts
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Source for UniPhier Pro5 ProEX Board
+ *
+ * Copyright (C) 2021 Socionext Inc.
+ *   Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+ */
+
+/dts-v1/;
+#include "uniphier-pro5.dtsi"
+
+/ {
+	model = "UniPhier Pro5 ProEX Board";
+	compatible = "socionext,uniphier-pro5-proex", "socionext,uniphier-pro5";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&pcie_ep {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index 3525125832dd..2d8591cdddb8 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -5,6 +5,8 @@
 // Copyright (C) 2015-2016 Socionext Inc.
 //   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
 / {
 	compatible = "socionext,uniphier-pro5";
 	#address-cells = <1>;
@@ -135,7 +137,8 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
 			      <0x506c0000 0x400>;
-			interrupts = <0 190 4>, <0 191 4>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(2 * 1024 * 1024)>;
 			cache-sets = <512>;
@@ -148,7 +151,8 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
 			      <0x506c8000 0x400>;
-			interrupts = <0 174 4>, <0 175 4>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(2 * 1024 * 1024)>;
 			cache-sets = <512>;
@@ -162,7 +166,7 @@
 			reg = <0x54006000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 39 4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
 			clocks = <&peri_clk 11>;
@@ -175,7 +179,7 @@
 			reg = <0x54006100 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 216 4>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
 			clocks = <&peri_clk 11>;	/* common with spi0 */
@@ -186,7 +190,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
@@ -197,7 +201,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
@@ -208,7 +212,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
@@ -219,7 +223,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006b00 0x40>;
-			interrupts = <0 177 4>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
@@ -246,7 +250,7 @@
 			reg = <0x58780000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 41 4>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
@@ -260,7 +264,7 @@
 			reg = <0x58781000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 42 4>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
@@ -274,7 +278,7 @@
 			reg = <0x58782000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 43 4>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&peri_clk 6>;
@@ -288,7 +292,7 @@
 			reg = <0x58783000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 44 4>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
@@ -304,7 +308,7 @@
 			reg = <0x58785000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 25 4>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 9>;
 			resets = <&peri_rst 9>;
 			clock-frequency = <400000>;
@@ -316,7 +320,7 @@
 			reg = <0x58786000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 26 4>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 10>;
 			resets = <&peri_rst 10>;
 			clock-frequency = <400000>;
@@ -337,39 +341,39 @@
 			reg = <0x59801000 0x400>;
 		};
 
-		sdctrl@59810000 {
+		sdctrl: syscon@59810000 {
 			compatible = "socionext,uniphier-pro5-sdctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59810000 0x400>;
 
-			sd_clk: clock {
+			sd_clk: clock-controller {
 				compatible = "socionext,uniphier-pro5-sd-clock";
 				#clock-cells = <1>;
 			};
 
-			sd_rst: reset {
+			sd_rst: reset-controller {
 				compatible = "socionext,uniphier-pro5-sd-reset";
 				#reset-cells = <1>;
 			};
 		};
 
-		perictrl@59820000 {
+		syscon@59820000 {
 			compatible = "socionext,uniphier-pro5-perictrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59820000 0x200>;
 
-			peri_clk: clock {
+			peri_clk: clock-controller {
 				compatible = "socionext,uniphier-pro5-peri-clock";
 				#clock-cells = <1>;
 			};
 
-			peri_rst: reset {
+			peri_rst: reset-controller {
 				compatible = "socionext,uniphier-pro5-peri-reset";
 				#reset-cells = <1>;
 			};
 		};
 
-		soc-glue@5f800000 {
+		syscon@5f800000 {
 			compatible = "socionext,uniphier-pro5-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
@@ -379,9 +383,10 @@
 			};
 		};
 
-		soc-glue@5f900000 {
+		syscon@5f900000 {
 			compatible = "socionext,uniphier-pro5-soc-glue-debug",
-				     "simple-mfd";
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x5f900000 0x2000>;
@@ -415,7 +420,7 @@
 		xdmac: dma-controller@5fc10000 {
 			compatible = "socionext,uniphier-xdmac";
 			reg = <0x5fc10000 0x5300>;
-			interrupts = <0 188 4>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 			dma-channels = <16>;
 			#dma-cells = <2>;
 		};
@@ -430,14 +435,16 @@
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x304>;
+			interrupts = <GIC_PPI 11
+				(GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
 		timer@60000600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x304>;
+			interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
@@ -449,17 +456,17 @@
 			interrupt-controller;
 		};
 
-		sysctrl@61840000 {
+		syscon@61840000 {
 			compatible = "socionext,uniphier-pro5-sysctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x61840000 0x10000>;
 
-			sys_clk: clock {
+			sys_clk: clock-controller {
 				compatible = "socionext,uniphier-pro5-clock";
 				#clock-cells = <1>;
 			};
 
-			sys_rst: reset {
+			sys_rst: reset-controller {
 				compatible = "socionext,uniphier-pro5-reset";
 				#reset-cells = <1>;
 			};
@@ -470,7 +477,7 @@
 			status = "disabled";
 			reg = <0x65a00000 0xcd00>;
 			interrupt-names = "host";
-			interrupts = <0 134 4>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -480,14 +487,15 @@
 			dr_mode = "host";
 		};
 
-		usb-glue@65b00000 {
+		usb-controller@65b00000 {
 			compatible = "socionext,uniphier-pro5-dwc3-glue",
 				     "simple-mfd";
+			reg = <0x65b00000 0x400>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x65b00000 0x400>;
 
-			usb0_rst: reset@0 {
+			usb0_rst: reset-controller@0 {
 				compatible = "socionext,uniphier-pro5-usb3-reset";
 				reg = <0x0 0x4>;
 				#reset-cells = <1>;
@@ -506,7 +514,7 @@
 				resets = <&sys_rst 12>, <&sys_rst 14>;
 			};
 
-			usb0_hsphy0: hs-phy@280 {
+			usb0_hsphy0: phy@280 {
 				compatible = "socionext,uniphier-pro5-usb3-hsphy";
 				reg = <0x280 0x10>;
 				#phy-cells = <0>;
@@ -517,7 +525,7 @@
 				vbus-supply = <&usb0_vbus0>;
 			};
 
-			usb0_ssphy0: ss-phy@380 {
+			usb0_ssphy0: phy@380 {
 				compatible = "socionext,uniphier-pro5-usb3-ssphy";
 				reg = <0x380 0x10>;
 				#phy-cells = <0>;
@@ -534,7 +542,7 @@
 			status = "disabled";
 			reg = <0x65c00000 0xcd00>;
 			interrupt-names = "host";
-			interrupts = <0 137 4>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -544,14 +552,15 @@
 			dr_mode = "host";
 		};
 
-		usb-glue@65d00000 {
+		usb-controller@65d00000 {
 			compatible = "socionext,uniphier-pro5-dwc3-glue",
 				     "simple-mfd";
+			reg = <0x65d00000 0x400>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x65d00000 0x400>;
 
-			usb1_rst: reset@0 {
+			usb1_rst: reset-controller@0 {
 				compatible = "socionext,uniphier-pro5-usb3-reset";
 				reg = <0x0 0x4>;
 				#reset-cells = <1>;
@@ -579,7 +588,7 @@
 				resets = <&sys_rst 12>, <&sys_rst 15>;
 			};
 
-			usb1_hsphy0: hs-phy@280 {
+			usb1_hsphy0: phy@280 {
 				compatible = "socionext,uniphier-pro5-usb3-hsphy";
 				reg = <0x280 0x10>;
 				#phy-cells = <0>;
@@ -590,7 +599,7 @@
 				vbus-supply = <&usb1_vbus0>;
 			};
 
-			usb1_hsphy1: hs-phy@290 {
+			usb1_hsphy1: phy@290 {
 				compatible = "socionext,uniphier-pro5-usb3-hsphy";
 				reg = <0x290 0x10>;
 				#phy-cells = <0>;
@@ -601,7 +610,7 @@
 				vbus-supply = <&usb1_vbus1>;
 			};
 
-			usb1_ssphy0: ss-phy@380 {
+			usb1_ssphy0: phy@380 {
 				compatible = "socionext,uniphier-pro5-usb3-ssphy";
 				reg = <0x380 0x10>;
 				#phy-cells = <0>;
@@ -614,8 +623,7 @@
 		};
 
 		pcie_ep: pcie-ep@66000000 {
-			compatible = "socionext,uniphier-pro5-pcie-ep",
-				     "snps,dw-pcie-ep";
+			compatible = "socionext,uniphier-pro5-pcie-ep";
 			status = "disabled";
 			reg-names = "dbi", "dbi2", "link", "addr_space";
 			reg = <0x66000000 0x1000>, <0x66001000 0x1000>,
@@ -650,7 +658,7 @@
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 65 4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
@@ -663,7 +671,7 @@
 			compatible = "socionext,uniphier-sd-v3.1";
 			status = "disabled";
 			reg = <0x68400000 0x800>;
-			interrupts = <0 78 4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&sd_clk 1>;
@@ -679,7 +687,7 @@
 			compatible = "socionext,uniphier-sd-v3.1";
 			status = "disabled";
 			reg = <0x68800000 0x800>;
-			interrupts = <0 76 4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default", "uhs";
 			pinctrl-0 = <&pinctrl_sd>;
 			pinctrl-1 = <&pinctrl_sd_uhs>;
@@ -691,6 +699,7 @@
 			sd-uhs-sdr12;
 			sd-uhs-sdr25;
 			sd-uhs-sdr50;
+			socionext,syscon-uhs-mode = <&sdctrl 0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
index 759384b60663..5f18b926c50a 100644
--- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
@@ -99,3 +99,7 @@
 &usb1 {
 	status = "okay";
 };
+
+&ahci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index b0b15c97306b..f97a57222101 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -6,6 +6,7 @@
 //   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 
 #include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -161,7 +162,10 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
 			      <0x506c0000 0x400>;
-			interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(1280 * 1024)>;
 			cache-sets = <512>;
@@ -175,7 +179,7 @@
 			reg = <0x54006000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 39 4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
 			clocks = <&peri_clk 11>;
@@ -188,7 +192,7 @@
 			reg = <0x54006100 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 216 4>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
 			clocks = <&peri_clk 12>;
@@ -199,7 +203,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
@@ -210,7 +214,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
@@ -221,7 +225,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
@@ -232,7 +236,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006b00 0x40>;
-			interrupts = <0 177 4>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
@@ -259,7 +263,7 @@
 		audio@56000000 {
 			compatible = "socionext,uniphier-pxs2-aio";
 			reg = <0x56000000 0x80000>;
-			interrupts = <0 144 4>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_ain1>,
 				    <&pinctrl_ain2>,
@@ -317,7 +321,7 @@
 			reg = <0x58780000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 41 4>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
@@ -331,7 +335,7 @@
 			reg = <0x58781000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 42 4>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
@@ -345,7 +349,7 @@
 			reg = <0x58782000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 43 4>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&peri_clk 6>;
@@ -359,7 +363,7 @@
 			reg = <0x58783000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 44 4>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
@@ -373,7 +377,7 @@
 			reg = <0x58784000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 45 4>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 8>;
 			resets = <&peri_rst 8>;
 			clock-frequency = <400000>;
@@ -385,7 +389,7 @@
 			reg = <0x58785000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 25 4>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 9>;
 			resets = <&peri_rst 9>;
 			clock-frequency = <400000>;
@@ -397,7 +401,7 @@
 			reg = <0x58786000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 26 4>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&peri_clk 10>;
 			resets = <&peri_rst 10>;
 			clock-frequency = <400000>;
@@ -418,33 +422,33 @@
 			reg = <0x59801000 0x400>;
 		};
 
-		sdctrl@59810000 {
+		sdctrl: syscon@59810000 {
 			compatible = "socionext,uniphier-pxs2-sdctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59810000 0x400>;
 
-			sd_clk: clock {
+			sd_clk: clock-controller {
 				compatible = "socionext,uniphier-pxs2-sd-clock";
 				#clock-cells = <1>;
 			};
 
-			sd_rst: reset {
+			sd_rst: reset-controller {
 				compatible = "socionext,uniphier-pxs2-sd-reset";
 				#reset-cells = <1>;
 			};
 		};
 
-		perictrl@59820000 {
+		syscon@59820000 {
 			compatible = "socionext,uniphier-pxs2-perictrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59820000 0x200>;
 
-			peri_clk: clock {
+			peri_clk: clock-controller {
 				compatible = "socionext,uniphier-pxs2-peri-clock";
 				#clock-cells = <1>;
 			};
 
-			peri_rst: reset {
+			peri_rst: reset-controller {
 				compatible = "socionext,uniphier-pxs2-peri-reset";
 				#reset-cells = <1>;
 			};
@@ -454,7 +458,7 @@
 			compatible = "socionext,uniphier-sd-v3.1.1";
 			status = "disabled";
 			reg = <0x5a000000 0x800>;
-			interrupts = <0 78 4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&sd_clk 1>;
@@ -470,7 +474,7 @@
 			compatible = "socionext,uniphier-sd-v3.1.1";
 			status = "disabled";
 			reg = <0x5a400000 0x800>;
-			interrupts = <0 76 4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default", "uhs";
 			pinctrl-0 = <&pinctrl_sd>;
 			pinctrl-1 = <&pinctrl_sd_uhs>;
@@ -482,9 +486,10 @@
 			sd-uhs-sdr12;
 			sd-uhs-sdr25;
 			sd-uhs-sdr50;
+			socionext,syscon-uhs-mode = <&sdctrl 0>;
 		};
 
-		soc_glue: soc-glue@5f800000 {
+		soc_glue: syscon@5f800000 {
 			compatible = "socionext,uniphier-pxs2-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
@@ -494,9 +499,10 @@
 			};
 		};
 
-		soc-glue@5f900000 {
+		syscon@5f900000 {
 			compatible = "socionext,uniphier-pxs2-soc-glue-debug",
-				     "simple-mfd";
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x5f900000 0x2000>;
@@ -515,7 +521,7 @@
 		xdmac: dma-controller@5fc10000 {
 			compatible = "socionext,uniphier-xdmac";
 			reg = <0x5fc10000 0x5300>;
-			interrupts = <0 188 4>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 			dma-channels = <16>;
 			#dma-cells = <2>;
 		};
@@ -530,14 +536,16 @@
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0xf04>;
+			interrupts = <GIC_PPI 11
+				(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
 		timer@60000600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0xf04>;
+			interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
@@ -549,24 +557,24 @@
 			interrupt-controller;
 		};
 
-		sysctrl@61840000 {
+		syscon@61840000 {
 			compatible = "socionext,uniphier-pxs2-sysctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x61840000 0x10000>;
 
-			sys_clk: clock {
+			sys_clk: clock-controller {
 				compatible = "socionext,uniphier-pxs2-clock";
 				#clock-cells = <1>;
 			};
 
-			sys_rst: reset {
+			sys_rst: reset-controller {
 				compatible = "socionext,uniphier-pxs2-reset";
 				#reset-cells = <1>;
 			};
 
-			pvtctl: pvtctl {
+			pvtctl: thermal-sensor {
 				compatible = "socionext,uniphier-pxs2-thermal";
-				interrupts = <0 3 4>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 				#thermal-sensor-cells = <0>;
 				socionext,tmod-calibration = <0x0f86 0x6844>;
 			};
@@ -576,14 +584,14 @@
 			compatible = "socionext,uniphier-pxs2-ave4";
 			status = "disabled";
 			reg = <0x65000000 0x8500>;
-			interrupts = <0 66 4>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_ether_rgmii>;
 			clock-names = "ether";
 			clocks = <&sys_clk 6>;
 			reset-names = "ether";
 			resets = <&sys_rst 6>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			local-mac-address = [00 00 00 00 00 00];
 			socionext,syscon-phy-mode = <&soc_glue 0>;
 
@@ -593,12 +601,53 @@
 			};
 		};
 
+		ahci: sata@65600000 {
+			compatible = "socionext,uniphier-pxs2-ahci",
+				     "generic-ahci";
+			status = "disabled";
+			reg = <0x65600000 0x10000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_clk 28>;
+			resets = <&sys_rst 28>, <&ahci_rst 0>;
+			ports-implemented = <1>;
+			phys = <&ahci_phy>;
+		};
+
+		sata-controller@65700000 {
+			compatible = "socionext,uniphier-pxs2-ahci-glue",
+				     "simple-mfd";
+			reg = <0x65700000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65700000 0x100>;
+
+			ahci_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pxs2-ahci-reset";
+				reg = <0x0 0x4>;
+				clock-names = "link";
+				clocks = <&sys_clk 28>;
+				reset-names = "link";
+				resets = <&sys_rst 28>;
+				#reset-cells = <1>;
+			};
+
+			ahci_phy: phy@10 {
+				compatible = "socionext,uniphier-pxs2-ahci-phy";
+				reg = <0x10 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 28>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 28>, <&sys_rst 30>;
+				#phy-cells = <0>;
+			};
+		};
+
 		usb0: usb@65a00000 {
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65a00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 134 4>, <0 135 4>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -609,14 +658,15 @@
 			dr_mode = "host";
 		};
 
-		usb-glue@65b00000 {
+		usb-controller@65b00000 {
 			compatible = "socionext,uniphier-pxs2-dwc3-glue",
 				     "simple-mfd";
+			reg = <0x65b00000 0x400>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x65b00000 0x400>;
 
-			usb0_rst: reset@0 {
+			usb0_rst: reset-controller@0 {
 				compatible = "socionext,uniphier-pxs2-usb3-reset";
 				reg = <0x0 0x4>;
 				#reset-cells = <1>;
@@ -644,7 +694,7 @@
 				resets = <&sys_rst 14>;
 			};
 
-			usb0_hsphy0: hs-phy@200 {
+			usb0_hsphy0: phy@200 {
 				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
 				reg = <0x200 0x10>;
 				#phy-cells = <0>;
@@ -655,7 +705,7 @@
 				vbus-supply = <&usb0_vbus0>;
 			};
 
-			usb0_hsphy1: hs-phy@210 {
+			usb0_hsphy1: phy@210 {
 				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
 				reg = <0x210 0x10>;
 				#phy-cells = <0>;
@@ -666,7 +716,7 @@
 				vbus-supply = <&usb0_vbus1>;
 			};
 
-			usb0_ssphy0: ss-phy@300 {
+			usb0_ssphy0: phy@300 {
 				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
 				reg = <0x300 0x10>;
 				#phy-cells = <0>;
@@ -677,7 +727,7 @@
 				vbus-supply = <&usb0_vbus0>;
 			};
 
-			usb0_ssphy1: ss-phy@310 {
+			usb0_ssphy1: phy@310 {
 				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
 				reg = <0x310 0x10>;
 				#phy-cells = <0>;
@@ -693,8 +743,8 @@
 			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
 			status = "disabled";
 			reg = <0x65c00000 0xcd00>;
-			interrupt-names = "host", "peripheral";
-			interrupts = <0 137 4>, <0 138 4>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
 			clock-names = "ref", "bus_early", "suspend";
@@ -704,14 +754,15 @@
 			dr_mode = "host";
 		};
 
-		usb-glue@65d00000 {
+		usb-controller@65d00000 {
 			compatible = "socionext,uniphier-pxs2-dwc3-glue",
 				     "simple-mfd";
+			reg = <0x65d00000 0x400>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x65d00000 0x400>;
 
-			usb1_rst: reset@0 {
+			usb1_rst: reset-controller@0 {
 				compatible = "socionext,uniphier-pxs2-usb3-reset";
 				reg = <0x0 0x4>;
 				#reset-cells = <1>;
@@ -739,7 +790,7 @@
 				resets = <&sys_rst 15>;
 			};
 
-			usb1_hsphy0: hs-phy@200 {
+			usb1_hsphy0: phy@200 {
 				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
 				reg = <0x200 0x10>;
 				#phy-cells = <0>;
@@ -750,7 +801,7 @@
 				vbus-supply = <&usb1_vbus0>;
 			};
 
-			usb1_hsphy1: hs-phy@210 {
+			usb1_hsphy1: phy@210 {
 				compatible = "socionext,uniphier-pxs2-usb3-hsphy";
 				reg = <0x210 0x10>;
 				#phy-cells = <0>;
@@ -761,7 +812,7 @@
 				vbus-supply = <&usb1_vbus1>;
 			};
 
-			usb1_ssphy0: ss-phy@300 {
+			usb1_ssphy0: phy@300 {
 				compatible = "socionext,uniphier-pxs2-usb3-ssphy";
 				reg = <0x300 0x10>;
 				#phy-cells = <0>;
@@ -780,7 +831,7 @@
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 65 4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts
index 6db949ec7411..2446f9e15360 100644
--- a/arch/arm/boot/dts/uniphier-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts
@@ -36,11 +36,11 @@
 };
 
 &ethsc {
-	interrupts = <0 8>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serialsc {
-	interrupts = <0 8>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 };
 
 &serial0 {
@@ -56,7 +56,7 @@
 };
 
 &gpio {
-	xirq0 {
+	xirq0-hog {
 		gpio-hog;
 		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
 		input;
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index 96a766deb8d1..f876282760e9 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -6,6 +6,7 @@
 //   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 
 #include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "socionext,uniphier-sld8";
@@ -55,7 +56,8 @@
 			compatible = "socionext,uniphier-system-cache";
 			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
 			      <0x506c0000 0x400>;
-			interrupts = <0 174 4>, <0 175 4>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 			cache-unified;
 			cache-size = <(256 * 1024)>;
 			cache-sets = <256>;
@@ -69,7 +71,7 @@
 			reg = <0x54006000 0x100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 39 4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
 			clocks = <&peri_clk 11>;
@@ -80,7 +82,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
 			clocks = <&peri_clk 0>;
@@ -91,7 +93,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
 			clocks = <&peri_clk 1>;
@@ -102,7 +104,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
 			clocks = <&peri_clk 2>;
@@ -113,7 +115,7 @@
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
 			reg = <0x54006b00 0x40>;
-			interrupts = <0 29 4>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
 			clocks = <&peri_clk 3>;
@@ -144,7 +146,7 @@
 			reg = <0x58400000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 41 1>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
 			clocks = <&peri_clk 4>;
@@ -158,7 +160,7 @@
 			reg = <0x58480000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 42 1>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
 			clocks = <&peri_clk 5>;
@@ -172,7 +174,7 @@
 			reg = <0x58500000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 43 1>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&peri_clk 6>;
@@ -186,7 +188,7 @@
 			reg = <0x58580000 0x40>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 44 1>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
 			clocks = <&peri_clk 7>;
@@ -209,33 +211,33 @@
 			reg = <0x59801000 0x400>;
 		};
 
-		mioctrl@59810000 {
+		mioctrl: syscon@59810000 {
 			compatible = "socionext,uniphier-sld8-mioctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59810000 0x800>;
 
-			mio_clk: clock {
+			mio_clk: clock-controller {
 				compatible = "socionext,uniphier-sld8-mio-clock";
 				#clock-cells = <1>;
 			};
 
-			mio_rst: reset {
+			mio_rst: reset-controller {
 				compatible = "socionext,uniphier-sld8-mio-reset";
 				#reset-cells = <1>;
 			};
 		};
 
-		perictrl@59820000 {
+		syscon@59820000 {
 			compatible = "socionext,uniphier-sld8-perictrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59820000 0x200>;
 
-			peri_clk: clock {
+			peri_clk: clock-controller {
 				compatible = "socionext,uniphier-sld8-peri-clock";
 				#clock-cells = <1>;
 			};
 
-			peri_rst: reset {
+			peri_rst: reset-controller {
 				compatible = "socionext,uniphier-sld8-peri-reset";
 				#reset-cells = <1>;
 			};
@@ -244,8 +246,13 @@
 		dmac: dma-controller@5a000000 {
 			compatible = "socionext,uniphier-mio-dmac";
 			reg = <0x5a000000 0x1000>;
-			interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
-				     <0 71 4>, <0 72 4>, <0 73 4>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&mio_clk 7>;
 			resets = <&mio_rst 7>;
 			#dma-cells = <1>;
@@ -255,7 +262,7 @@
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a400000 0x200>;
-			interrupts = <0 76 4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default", "uhs";
 			pinctrl-0 = <&pinctrl_sd>;
 			pinctrl-1 = <&pinctrl_sd_uhs>;
@@ -269,13 +276,14 @@
 			sd-uhs-sdr12;
 			sd-uhs-sdr25;
 			sd-uhs-sdr50;
+			socionext,syscon-uhs-mode = <&mioctrl 0>;
 		};
 
 		emmc: mmc@5a500000 {
 			compatible = "socionext,uniphier-sd-v2.91";
 			status = "disabled";
 			reg = <0x5a500000 0x200>;
-			interrupts = <0 78 4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_emmc>;
 			clocks = <&mio_clk 1>;
@@ -293,7 +301,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a800100 0x100>;
-			interrupts = <0 80 4>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
@@ -307,7 +315,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a810100 0x100>;
-			interrupts = <0 81 4>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
@@ -321,7 +329,7 @@
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
 			reg = <0x5a820100 0x100>;
-			interrupts = <0 82 4>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb2>;
 			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
@@ -331,7 +339,7 @@
 			has-transaction-translator;
 		};
 
-		soc-glue@5f800000 {
+		syscon@5f800000 {
 			compatible = "socionext,uniphier-sld8-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
@@ -341,9 +349,10 @@
 			};
 		};
 
-		soc-glue@5f900000 {
+		syscon@5f900000 {
 			compatible = "socionext,uniphier-sld8-soc-glue-debug",
-				     "simple-mfd";
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x5f900000 0x2000>;
@@ -362,14 +371,16 @@
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x104>;
+			interrupts = <GIC_PPI 11
+				(GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
 		timer@60000600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x104>;
+			interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_RAW(1) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&arm_timer_clk>;
 		};
 
@@ -388,17 +399,17 @@
 			#interrupt-cells = <2>;
 		};
 
-		sysctrl@61840000 {
+		syscon@61840000 {
 			compatible = "socionext,uniphier-sld8-sysctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x61840000 0x10000>;
 
-			sys_clk: clock {
+			sys_clk: clock-controller {
 				compatible = "socionext,uniphier-sld8-clock";
 				#clock-cells = <1>;
 			};
 
-			sys_rst: reset {
+			sys_rst: reset-controller {
 				compatible = "socionext,uniphier-sld8-reset";
 				#reset-cells = <1>;
 			};
@@ -411,7 +422,7 @@
 			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <0 65 4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
 			clock-names = "nand", "nand_x", "ecc";
diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi
index 444802fee9fb..97e7d5db8eb8 100644
--- a/arch/arm/boot/dts/uniphier-support-card.dtsi
+++ b/arch/arm/boot/dts/uniphier-support-card.dtsi
@@ -8,13 +8,13 @@
 &system_bus {
 	status = "okay";
 	ranges = <1 0x00000000 0x42000000 0x02000000>;
-	interrupt-parent = <&gpio>;
 
 	ethsc: ethernet@1,1f00000 {
 		compatible = "smsc,lan9118", "smsc,lan9115";
 		reg = <1 0x01f00000 0x1000>;
 		phy-mode = "mii";
 		reg-io-width = <4>;
+		interrupt-parent = <&gpio>;
 	};
 
 	serialsc: serial@1,1fb0000 {
@@ -22,5 +22,6 @@
 		reg = <1 0x01fb0000 0x20>;
 		clock-frequency = <12288000>;
 		reg-shift = <1>;
+		interrupt-parent = <&gpio>;
 	};
 };
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index 8a0cfbfd0c45..b6cb9cdf8197 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -60,7 +60,7 @@
 			spi0: spi@fffa4000 {
 				cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
 				status = "okay";
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					reg = <0>;
 					spi-max-frequency = <15000000>;
diff --git a/arch/arm/boot/dts/versatile-ab-ib2.dts b/arch/arm/boot/dts/versatile-ab-ib2.dts
index c577ff4bb4be..7ebb0dfd0467 100644
--- a/arch/arm/boot/dts/versatile-ab-ib2.dts
+++ b/arch/arm/boot/dts/versatile-ab-ib2.dts
@@ -13,9 +13,13 @@
 	syscon@27000000 {
 		compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd";
 		reg = <0x27000000 0x4>;
+		ranges = <0x0 0x27000000 0x4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-		led@00.4 {
+		led@0,4 {
 			compatible = "register-bit-led";
+			reg = <0x00 0x04>;
 			offset = <0x00>;
 			mask = <0x10>;
 			label = "versatile-ib2:0";
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 37bd41ff8dff..f31dcf7e5862 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -70,61 +70,72 @@
 	core-module@10000000 {
 		compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
 		reg = <0x10000000 0x200>;
+		ranges = <0x0 0x10000000 0x200>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-		led@08.0 {
+		led@8,0 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x01>;
 			label = "versatile:0";
 			linux,default-trigger = "heartbeat";
 			default-state = "on";
 		};
-		led@08.1 {
+		led@8,1 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x02>;
 			label = "versatile:1";
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
-		led@08.2 {
+		led@8,2 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x04>;
 			label = "versatile:2";
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
-		led@08.3 {
+		led@8,3 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x08>;
 			label = "versatile:3";
 			default-state = "off";
 		};
-		led@08.4 {
+		led@8,4 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x10>;
 			label = "versatile:4";
 			default-state = "off";
 		};
-		led@08.5 {
+		led@8,5 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x20>;
 			label = "versatile:5";
 			default-state = "off";
 		};
-		led@08.6 {
+		led@8,6 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x40>;
 			label = "versatile:6";
 			default-state = "off";
 		};
-		led@08.7 {
+		led@8,7 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x80>;
 			label = "versatile:7";
@@ -195,16 +206,15 @@
 		#size-cells = <1>;
 		ranges;
 
-		vic: intc@10140000 {
+		vic: interrupt-controller@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x10140000 0x1000>;
-			clear-mask = <0xffffffff>;
 			valid-mask = <0xffffffff>;
 		};
 
-		sic: intc@10003000 {
+		sic: interrupt-controller@10003000 {
 			compatible = "arm,versatile-sic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -227,7 +237,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		uart0: uart@101f1000 {
+		uart0: serial@101f1000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f1000 0x1000>;
 			interrupts = <12>;
@@ -235,7 +245,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart1: uart@101f2000 {
+		uart1: serial@101f2000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f2000 0x1000>;
 			interrupts = <13>;
@@ -243,7 +253,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart2: uart@101f3000 {
+		uart2: serial@101f3000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f3000 0x1000>;
 			interrupts = <14>;
@@ -381,7 +391,7 @@
 			reg = <0x101f4000 0x1000>;
 			interrupts = <11>;
 			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		fpga {
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index 06a0fdf24026..fc21ce54b33a 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -7,7 +7,7 @@
 
 	amba {
 		/* The Versatile PB is using more SIC IRQ lines than the AB */
-		sic: intc@10003000 {
+		sic: interrupt-controller@10003000 {
 			clear-mask = <0xffffffff>;
 			/*
 			 * Valid interrupt lines mask according to
@@ -85,7 +85,7 @@
 				 */
 				interrupts-extended = <&sic 22 &sic 23>;
 			};
-			uart@9000 {
+			serial@9000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x9000 0x1000>;
 				interrupt-parent = <&sic>;
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 4f7220b11f2d..8af4b77fe655 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -17,6 +17,7 @@
  * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
  * CHANGES TO vexpress-v2m.dtsi!
  */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	v2m_fixed_3v3: fixed-regulator-0 {
@@ -101,16 +102,68 @@
 	};
 
 	bus@8000000 {
-		motherboard-bus {
-			model = "V2M-P1";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 63>;
+		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		motherboard-bus@8000000 {
 			arm,hbi = <0x190>;
 			arm,vexpress,site = <0>;
-			arm,v2m-memory-map = "rs1";
 			compatible = "arm,vexpress,v2m-p1", "simple-bus";
 			#address-cells = <2>; /* SMB chipselect number and offset */
 			#size-cells = <1>;
-			#interrupt-cells = <1>;
-			ranges;
+			ranges = <0 0 0x08000000 0x04000000>,
+				 <1 0 0x14000000 0x04000000>,
+				 <2 0 0x18000000 0x04000000>,
+				 <3 0 0x1c000000 0x04000000>,
+				 <4 0 0x0c000000 0x04000000>,
+				 <5 0 0x10000000 0x04000000>;
 
 			nor_flash: flash@0 {
 				compatible = "arm,vexpress-flash", "cfi-flash";
@@ -144,7 +197,7 @@
 				compatible = "nxp,usb-isp1761";
 				reg = <2 0x03000000 0x20000>;
 				interrupts = <16>;
-				port1-otg;
+				dr_mode = "peripheral";
 			};
 
 			iofpga-bus@300000000 {
@@ -215,7 +268,7 @@
 					clock-names = "apb_pclk";
 				};
 
-				mmci@50000 {
+				mmc@50000 {
 					compatible = "arm,pl180", "arm,primecell";
 					reg = <0x050000 0x1000>;
 					interrupts = <9>, <10>;
@@ -275,7 +328,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				wdt@f0000 {
+				watchdog@f0000 {
 					compatible = "arm,sp805", "arm,primecell";
 					reg = <0x0f0000 0x1000>;
 					interrupts = <0>;
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index 2ac41ed3a57c..c5e92f6d2fcd 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -17,18 +17,73 @@
  * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
  * CHANGES TO vexpress-v2m-rs1.dtsi!
  */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
-	bus@4000000 {
-		motherboard {
-			model = "V2M-P1";
+	bus@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x40000000 0x40000000 0x10000000>,
+			 <0x10000000 0x10000000 0x00020000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 63>;
+		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		motherboard-bus@40000000 {
 			arm,hbi = <0x190>;
 			arm,vexpress,site = <0>;
 			compatible = "arm,vexpress,v2m-p1", "simple-bus";
 			#address-cells = <2>; /* SMB chipselect number and offset */
 			#size-cells = <1>;
-			#interrupt-cells = <1>;
-			ranges;
+			ranges = <0 0 0x40000000 0x04000000>,
+				 <1 0 0x44000000 0x04000000>,
+				 <2 0 0x48000000 0x04000000>,
+				 <3 0 0x4c000000 0x04000000>,
+				 <7 0 0x10000000 0x00020000>;
 
 			flash@0,00000000 {
 				compatible = "arm,vexpress-flash", "cfi-flash";
@@ -62,7 +117,7 @@
 				compatible = "nxp,usb-isp1761";
 				reg = <3 0x03000000 0x20000>;
 				interrupts = <16>;
-				port1-otg;
+				dr_mode = "peripheral";
 			};
 
 			iofpga@7,00000000 {
@@ -161,7 +216,7 @@
 					clock-names = "KMIREFCLK", "apb_pclk";
 				};
 
-				v2m_serial0: uart@9000 {
+				v2m_serial0: serial@9000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x09000 0x1000>;
 					interrupts = <5>;
@@ -169,7 +224,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				v2m_serial1: uart@a000 {
+				v2m_serial1: serial@a000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x0a000 0x1000>;
 					interrupts = <6>;
@@ -177,7 +232,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				v2m_serial2: uart@b000 {
+				v2m_serial2: serial@b000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x0b000 0x1000>;
 					interrupts = <7>;
@@ -185,7 +240,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				v2m_serial3: uart@c000 {
+				v2m_serial3: serial@c000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x0c000 0x1000>;
 					interrupts = <8>;
@@ -328,49 +383,49 @@
 			leds {
 				compatible = "gpio-leds";
 
-				user1 {
+				led-user1 {
 					label = "v2m:green:user1";
 					gpios = <&v2m_led_gpios 0 0>;
 					linux,default-trigger = "heartbeat";
 				};
 
-				user2 {
+				led-user2 {
 					label = "v2m:green:user2";
 					gpios = <&v2m_led_gpios 1 0>;
 					linux,default-trigger = "mmc0";
 				};
 
-				user3 {
+				led-user3 {
 					label = "v2m:green:user3";
 					gpios = <&v2m_led_gpios 2 0>;
 					linux,default-trigger = "cpu0";
 				};
 
-				user4 {
+				led-user4 {
 					label = "v2m:green:user4";
 					gpios = <&v2m_led_gpios 3 0>;
 					linux,default-trigger = "cpu1";
 				};
 
-				user5 {
+				led-user5 {
 					label = "v2m:green:user5";
 					gpios = <&v2m_led_gpios 4 0>;
 					linux,default-trigger = "cpu2";
 				};
 
-				user6 {
+				led-user6 {
 					label = "v2m:green:user6";
 					gpios = <&v2m_led_gpios 5 0>;
 					linux,default-trigger = "cpu3";
 				};
 
-				user7 {
+				led-user7 {
 					label = "v2m:green:user7";
 					gpios = <&v2m_led_gpios 6 0>;
 					linux,default-trigger = "cpu4";
 				};
 
-				user8 {
+				led-user8 {
 					label = "v2m:green:user8";
 					gpios = <&v2m_led_gpios 7 0>;
 					linux,default-trigger = "cpu5";
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index e63c5c0bfb43..679537e17ff5 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -237,62 +237,7 @@
 	};
 
 	bus@8000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
+		ranges = <0x8000000 0 0x8000000 0x18000000>;
 	};
 
 	site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 012d40a7228c..511e87cc2bc5 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -609,62 +609,7 @@
 	};
 
 	smb: bus@8000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
+		ranges = <0x8000000 0 0x8000000 0x18000000>;
 	};
 
 	site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index 7aa64ae25779..3b88209bacea 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -207,62 +207,7 @@
 	};
 
 	smb: bus@8000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x04000000>,
-			 <1 0 0x14000000 0x04000000>,
-			 <2 0 0x18000000 0x04000000>,
-			 <3 0 0x1c000000 0x04000000>,
-			 <4 0 0x0c000000 0x04000000>,
-			 <5 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
+		ranges = <0 0x8000000 0x18000000>;
 	};
 
 	site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index 4c5847955856..5916e4877eac 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -295,64 +295,6 @@
 		};
 	};
 
-	smb: bus@4000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x40000000 0x04000000>,
-			 <1 0 0x44000000 0x04000000>,
-			 <2 0 0x48000000 0x04000000>,
-			 <3 0 0x4c000000 0x04000000>,
-			 <7 0 0x10000000 0x00020000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-	};
-
 	site2: hsb@e0000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index c12a1b8bc086..14c411f146f5 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -103,7 +103,7 @@
 	status = "okay";
 
 	/* M41T0M6 real time clock on carrier board */
-	rtc: m41t0m6@68 {
+	rtc: rtc@68 {
 		compatible = "st,m41t0";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts
index 830c85476b3d..e4f691d601cc 100644
--- a/arch/arm/boot/dts/vf610-bk4.dts
+++ b/arch/arm/boot/dts/vf610-bk4.dts
@@ -38,7 +38,7 @@
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
 		/* LED D5 */
-		led0: heartbeat {
+		led0: led-heartbeat {
 			label = "heartbeat";
 			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -61,7 +61,7 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	spi-gpio {
+	spi {
 		compatible = "spi-gpio";
 		pinctrl-0 = <&pinctrl_gpio_spi>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/vf610-pinfunc.h b/arch/arm/boot/dts/vf610-pinfunc.h
index f1e5a7cf58a9..b7b7322a2d1b 100644
--- a/arch/arm/boot/dts/vf610-pinfunc.h
+++ b/arch/arm/boot/dts/vf610-pinfunc.h
@@ -420,7 +420,7 @@
 #define VF610_PAD_PTD29__FTM3_CH2		0x104 0x000 ALT4 0x0
 #define VF610_PAD_PTD29__DSPI2_SIN		0x104 0x000 ALT5 0x0
 #define VF610_PAD_PTD29__DEBUG_OUT11		0x104 0x000 ALT7 0x0
-#define VF610_PAD_PTD28__GPIO_66	 	0x108 0x000 ALT0 0x0
+#define VF610_PAD_PTD28__GPIO_66		0x108 0x000 ALT0 0x0
 #define VF610_PAD_PTD28__FB_AD28		0x108 0x000 ALT1 0x0
 #define VF610_PAD_PTD28__NF_IO12		0x108 0x000 ALT2 0x0
 #define VF610_PAD_PTD28__I2C2_SCL		0x108 0x34C ALT3 0x1
@@ -802,5 +802,55 @@
 #define VF610_PAD_PTE28__EWM_OUT		0x214 0x000 ALT7 0x0
 #define VF610_PAD_PTA7__GPIO_134		0x218 0x000 ALT0 0x0
 #define VF610_PAD_PTA7__VIU_PIX_CLK		0x218 0x3AC ALT1 0x1
+#define VF610_PAD_DDR_RESETB			0x21c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A15__DDR_A_15		0x220 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A14__DDR_A_14		0x224 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A13__DDR_A_13		0x228 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A12__DDR_A_12		0x22c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A11__DDR_A_11		0x230 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A10__DDR_A_10		0x234 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A9__DDR_A_9		0x238 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A8__DDR_A_8		0x23c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A7__DDR_A_7		0x240 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A6__DDR_A_6		0x244 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A5__DDR_A_5		0x248 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A4__DDR_A_4		0x24c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A3__DDR_A_3		0x250 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A2__DDR_A_2		0x254 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A1__DDR_A_1		0x258 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A0__DDR_A_0		0x25c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA2__DDR_BA_2		0x260 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA1__DDR_BA_1		0x264 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA0__DDR_BA_0		0x268 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CAS__DDR_CAS_B		0x26c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CKE__DDR_CKE_0		0x270 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CLK__DDR_CLK_0		0x274 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CS__DDR_CS_B_0		0x278 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D15__DDR_D_15		0x27c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D14__DDR_D_14		0x280 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D13__DDR_D_13		0x284 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D12__DDR_D_12		0x288 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D11__DDR_D_11		0x28c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D10__DDR_D_10		0x290 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D9__DDR_D_9		0x294 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D8__DDR_D_8		0x298 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D7__DDR_D_7		0x29c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D6__DDR_D_6		0x2a0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D5__DDR_D_5		0x2a4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D4__DDR_D_4		0x2a8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D3__DDR_D_3		0x2ac 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D2__DDR_D_2		0x2b0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D1__DDR_D_1		0x2b4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D0__DDR_D_0		0x2b8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQM1__DDR_DQM_1		0x2bc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQM0__DDR_DQM_0		0x2c0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQS1__DDR_DQS_1		0x2c4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQS0__DDR_DQS_0		0x2c8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_RAS__DDR_RAS_B		0x2cc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_WE__DDR_WE_B		0x2d0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_ODT1__DDR_ODT_0		0x2d4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_ODT0__DDR_ODT_1		0x2d8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1	0x2dc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2	0x2e0 0x000 ALT0 0x0
 
 #endif
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index dbb5ffcdcec4..6c246d5aa032 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -169,7 +169,7 @@
 	       VDDA-supply = <&reg_3p3v>;
 	       VDDIO-supply = <&reg_3p3v>;
 	       clocks = <&clks VF610_CLK_SAI2>;
-       };
+	};
 };
 
 &iomuxc {
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 6f1e0f0d4f0a..6280c5e86a12 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -149,7 +149,7 @@
 						reg = <5>;
 						label = "dsa";
 						link = <&switch2port9>;
-						phy-mode = "rgmii-txid";
+						phy-mode = "1000base-x";
 
 						fixed-link {
 							speed = <1000>;
@@ -211,12 +211,14 @@
 						reg = <0>;
 						label = "lan6";
 						phy-handle = <&switch2phy0>;
+						phy-mode = "sgmii";
 					};
 
 					port@1 {
 						reg = <1>;
 						label = "lan7";
 						phy-handle = <&switch2phy1>;
+						phy-mode = "sgmii";
 					};
 
 					port@2 {
@@ -252,7 +254,7 @@
 					switch2port9: port@9 {
 						reg = <9>;
 						label = "dsa";
-						phy-mode = "rgmii-txid";
+						phy-mode = "1000base-x";
 						link = <&switch1port5
 							&switch0port5>;
 
@@ -286,7 +288,7 @@
 		};
 	};
 
-	spi0 {
+	spi-0 {
 		compatible = "spi-gpio";
 		pinctrl-0 = <&pinctrl_gpio_spi0>;
 		pinctrl-names = "default";
@@ -311,8 +313,6 @@
 			compatible = "atmel,at93c46d";
 			pinctrl-0 = <&pinctrl_gpio_e6185_eeprom_sel>;
 			pinctrl-names = "default";
-			#address-cells = <0>;
-			#size-cells = <0>;
 			reg = <1>;
 			spi-max-frequency = <500000>;
 			spi-cs-high;
@@ -345,7 +345,7 @@
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index de79dcfd32e6..c00d39562a10 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -259,7 +259,7 @@
 		xtal-trim = /bits/ 8 <0x06>;
 
 		sleep-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
-		reset-gpio = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+		reset-gpio = <&gpio6 10 GPIO_ACTIVE_LOW>;
 
 		fsl,spi-cs-sck-delay = <180>;
 		fsl,spi-sck-cs-delay = <250>;
@@ -340,7 +340,7 @@
 };
 
 &i2c2 {
-	tca9548@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi
index f8299f33a692..ce5e52896b19 100644
--- a/arch/arm/boot/dts/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi
@@ -59,7 +59,7 @@
 		pinctrl-0 = <&pinctrl_leds_debug>;
 		pinctrl-names = "default";
 
-		debug {
+		led-debug {
 			label = "zii:green:debug1";
 			gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index 040a1f8b6130..7b3276cd470f 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -23,7 +23,7 @@
 		pinctrl-0 = <&pinctrl_leds_debug>;
 		pinctrl-names = "default";
 
-		debug {
+		led-debug {
 			label = "zii:green:debug1";
 			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts
index 6c6ec46fd015..180acb0795b9 100644
--- a/arch/arm/boot/dts/vf610-zii-spb4.dts
+++ b/arch/arm/boot/dts/vf610-zii-spb4.dts
@@ -241,7 +241,7 @@
 	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
index fe600ab2e4bd..20beaa8433b6 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
@@ -254,7 +254,7 @@
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 
-	rave-sp {
+	mcu {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 956182d08e74..2fba923821d0 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -2,7 +2,6 @@
 //
 // Copyright 2013 Freescale Semiconductor, Inc.
 
-
 #include "vf500.dtsi"
 
 &a5_cpu {
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index d53f9c9db8bf..ff4479994b60 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -191,9 +191,8 @@
 					<&clks VF610_CLK_SAI0_DIV>,
 					<&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "tx", "rx";
-				dmas = <&edma0 0 17>,
-					<&edma0 0 16>;
+				dma-names = "rx", "tx";
+				dmas = <&edma0 0 16>, <&edma0 0 17>;
 				status = "disabled";
 			};
 
@@ -205,9 +204,8 @@
 					<&clks VF610_CLK_SAI1_DIV>,
 					<&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "tx", "rx";
-				dmas = <&edma0 0 19>,
-					<&edma0 0 18>;
+				dma-names = "rx", "tx";
+				dmas = <&edma0 0 18>, <&edma0 0 19>;
 				status = "disabled";
 			};
 
@@ -219,9 +217,8 @@
 					<&clks VF610_CLK_SAI2_DIV>,
 					<&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "tx", "rx";
-				dmas = <&edma0 0 21>,
-					<&edma0 0 20>;
+				dma-names = "rx", "tx";
+				dmas = <&edma0 0 20>, <&edma0 0 21>;
 				status = "disabled";
 			};
 
@@ -233,9 +230,8 @@
 					<&clks VF610_CLK_SAI3_DIV>,
 					<&clks 0>, <&clks 0>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dma-names = "tx", "rx";
-				dmas = <&edma0 1 9>,
-					<&edma0 1 8>;
+				dma-names = "rx", "tx";
+				dmas = <&edma0 1 8>, <&edma0 1 9>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index df9ad831cf05..cd9931f6bcbd 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -230,8 +230,20 @@
 			#size-cells = <0>;
 		};
 
+		qspi: spi@e000d000 {
+			compatible = "xlnx,zynq-qspi-1.0";
+			reg = <0xe000d000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 19 4>;
+			clocks = <&clkc 10>, <&clkc 43>;
+			clock-names = "ref_clk", "pclk";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		gem0: ethernet@e000b000 {
-			compatible = "cdns,zynq-gem", "cdns,gem";
+			compatible = "xlnx,zynq-gem", "cdns,gem";
 			reg = <0xe000b000 0x1000>;
 			status = "disabled";
 			interrupts = <0 22 4>;
@@ -242,7 +254,7 @@
 		};
 
 		gem1: ethernet@e000c000 {
-			compatible = "cdns,zynq-gem", "cdns,gem";
+			compatible = "xlnx,zynq-gem", "cdns,gem";
 			reg = <0xe000c000 0x1000>;
 			status = "disabled";
 			interrupts = <0 45 4>;
@@ -252,6 +264,27 @@
 			#size-cells = <0>;
 		};
 
+		smcc: memory-controller@e000e000 {
+			compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+			reg = <0xe000e000 0x0001000>;
+			status = "disabled";
+			clock-names = "memclk", "apb_pclk";
+			clocks = <&clkc 11>, <&clkc 44>;
+			ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+				  0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+				  0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			nfc0: nand-controller@0,0 {
+				compatible = "arm,pl353-nand-r2p1";
+				reg = <0 0 0x1000000>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		sdhci0: mmc@e0100000 {
 			compatible = "arasan,sdhci-8.9a";
 			status = "disabled";
@@ -310,20 +343,20 @@
 			};
 		};
 
-		dmac_s: dmac@f8003000 {
+		dmac_s: dma-controller@f8003000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0xf8003000 0x1000>;
 			interrupt-parent = <&intc>;
-			interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
-				"dma4", "dma5", "dma6", "dma7";
+			/*
+			 * interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
+			 * "dma4", "dma5", "dma6", "dma7";
+			 */
 			interrupts = <0 13 4>,
 			             <0 14 4>, <0 15 4>,
 			             <0 16 4>, <0 17 4>,
 			             <0 40 4>, <0 41 4>,
 			             <0 42 4>, <0 43 4>;
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <4>;
 			clocks = <&clkc 27>;
 			clock-names = "apb_pclk";
 		};
diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts
index b0b836aedd76..53fa6dbfd8fd 100644
--- a/arch/arm/boot/dts/zynq-ebaz4205.dts
+++ b/arch/arm/boot/dts/zynq-ebaz4205.dts
@@ -48,6 +48,14 @@
 	pinctrl-0 = <&pinctrl_gpio0_default>;
 };
 
+&nfc0 {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+	};
+};
+
 &pinctrl0 {
 	pinctrl_gpio0_default: gpio0-default {
 		mux {
@@ -118,6 +126,10 @@
 	};
 };
 
+&smcc {
+	status = "okay";
+};
+
 &sdhci0 {
 	status = "okay";
 	disable-wp;
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index cf70aff26c66..d23201ba8cd7 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -30,14 +30,14 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
-		sw14 {
+		switch-14 {
 			label = "sw14";
 			gpios = <&gpio0 12 0>;
 			linux,code = <108>; /* down */
 			wakeup-source;
 			autorepeat;
 		};
-		sw13 {
+		switch-13 {
 			label = "sw13";
 			gpios = <&gpio0 14 0>;
 			linux,code = <103>; /* up */
diff --git a/arch/arm/boot/dts/zynq-zturn-common.dtsi b/arch/arm/boot/dts/zynq-zturn-common.dtsi
index bf5d1c4568b0..dfb1fbafe3aa 100644
--- a/arch/arm/boot/dts/zynq-zturn-common.dtsi
+++ b/arch/arm/boot/dts/zynq-zturn-common.dtsi
@@ -49,7 +49,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
-		K1 {
+		key {
 			label = "K1";
 			gpios = <&gpio0 0x32 0x1>;
 			linux,code = <0x66>;
diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh
index 2a45092a40e3..9ec11fac7d8d 100644..100755
--- a/arch/arm/boot/install.sh
+++ b/arch/arm/boot/install.sh
@@ -1,7 +1,5 @@
 #!/bin/sh
 #
-# arch/arm/boot/install.sh
-#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -18,25 +16,6 @@
 #   $2 - kernel image file
 #   $3 - kernel map file
 #   $4 - default install path (blank if root directory)
-#
-
-verify () {
-	if [ ! -f "$1" ]; then
-		echo ""                                                   1>&2
-		echo " *** Missing file: $1"                              1>&2
-		echo ' *** You need to run "make" before "make install".' 1>&2
-		echo ""                                                   1>&2
-		exit 1
-	fi
-}
-
-# Make sure the files actually exist
-verify "$2"
-verify "$3"
-
-# User may have a custom install script
-if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
-if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
 
 if [ "$(basename $2)" = "zImage" ]; then
 # Compressed install
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index c8e198631d41..d2fdb1796f48 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,11 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 config SA1111
 	bool
-	select DMABOUNCE if !ARCH_PXA
-
-config DMABOUNCE
-	bool
-	select ZONE_DMA
+	select ZONE_DMA if ARCH_SA1100
 
 config KRAIT_L2_ACCESSORS
 	bool
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 8cd574be94cf..9733381074e0 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -6,7 +6,6 @@
 obj-y				+= firmware.o
 
 obj-$(CONFIG_SA1111)		+= sa1111.o
-obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
@@ -14,7 +13,5 @@ obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
 obj-$(CONFIG_CPU_V7)		+= secure_cntvoff.o
 obj-$(CONFIG_MCPM)		+= mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
 CFLAGS_REMOVE_mcpm_entry.o	= -pg
-AFLAGS_mcpm_head.o		:= -march=armv7-a
-AFLAGS_vlock.o			:= -march=armv7-a
 obj-$(CONFIG_BL_SWITCHER)	+= bL_switcher.o
 obj-$(CONFIG_BL_SWITCHER_DUMMY_IF) += bL_switcher_dummy_if.o
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
deleted file mode 100644
index 7996c04393d5..000000000000
--- a/arch/arm/common/dmabounce.c
+++ /dev/null
@@ -1,582 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  arch/arm/common/dmabounce.c
- *
- *  Special dma_{map/unmap/dma_sync}_* routines for systems that have
- *  limited DMA windows. These functions utilize bounce buffers to
- *  copy data to/from buffers located outside the DMA region. This
- *  only works for systems in which DMA memory is at the bottom of
- *  RAM, the remainder of memory is at the top and the DMA memory
- *  can be marked as ZONE_DMA. Anything beyond that such as discontiguous
- *  DMA windows will require custom implementations that reserve memory
- *  areas at early bootup.
- *
- *  Original version by Brad Parker (brad@heeltoe.com)
- *  Re-written by Christopher Hoover <ch@murgatroid.com>
- *  Made generic by Deepak Saxena <dsaxena@plexity.net>
- *
- *  Copyright (C) 2002 Hewlett Packard Company.
- *  Copyright (C) 2004 MontaVista Software, Inc.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/page-flags.h>
-#include <linux/device.h>
-#include <linux/dma-direct.h>
-#include <linux/dma-map-ops.h>
-#include <linux/dmapool.h>
-#include <linux/list.h>
-#include <linux/scatterlist.h>
-
-#include <asm/cacheflush.h>
-#include <asm/dma-iommu.h>
-
-#undef STATS
-
-#ifdef STATS
-#define DO_STATS(X) do { X ; } while (0)
-#else
-#define DO_STATS(X) do { } while (0)
-#endif
-
-/* ************************************************** */
-
-struct safe_buffer {
-	struct list_head node;
-
-	/* original request */
-	void		*ptr;
-	size_t		size;
-	int		direction;
-
-	/* safe buffer info */
-	struct dmabounce_pool *pool;
-	void		*safe;
-	dma_addr_t	safe_dma_addr;
-};
-
-struct dmabounce_pool {
-	unsigned long	size;
-	struct dma_pool	*pool;
-#ifdef STATS
-	unsigned long	allocs;
-#endif
-};
-
-struct dmabounce_device_info {
-	struct device *dev;
-	struct list_head safe_buffers;
-#ifdef STATS
-	unsigned long total_allocs;
-	unsigned long map_op_count;
-	unsigned long bounce_count;
-	int attr_res;
-#endif
-	struct dmabounce_pool	small;
-	struct dmabounce_pool	large;
-
-	rwlock_t lock;
-
-	int (*needs_bounce)(struct device *, dma_addr_t, size_t);
-};
-
-#ifdef STATS
-static ssize_t dmabounce_show(struct device *dev, struct device_attribute *attr,
-			      char *buf)
-{
-	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
-	return sprintf(buf, "%lu %lu %lu %lu %lu %lu\n",
-		device_info->small.allocs,
-		device_info->large.allocs,
-		device_info->total_allocs - device_info->small.allocs -
-			device_info->large.allocs,
-		device_info->total_allocs,
-		device_info->map_op_count,
-		device_info->bounce_count);
-}
-
-static DEVICE_ATTR(dmabounce_stats, 0400, dmabounce_show, NULL);
-#endif
-
-
-/* allocate a 'safe' buffer and keep track of it */
-static inline struct safe_buffer *
-alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
-		  size_t size, enum dma_data_direction dir)
-{
-	struct safe_buffer *buf;
-	struct dmabounce_pool *pool;
-	struct device *dev = device_info->dev;
-	unsigned long flags;
-
-	dev_dbg(dev, "%s(ptr=%p, size=%d, dir=%d)\n",
-		__func__, ptr, size, dir);
-
-	if (size <= device_info->small.size) {
-		pool = &device_info->small;
-	} else if (size <= device_info->large.size) {
-		pool = &device_info->large;
-	} else {
-		pool = NULL;
-	}
-
-	buf = kmalloc(sizeof(struct safe_buffer), GFP_ATOMIC);
-	if (buf == NULL) {
-		dev_warn(dev, "%s: kmalloc failed\n", __func__);
-		return NULL;
-	}
-
-	buf->ptr = ptr;
-	buf->size = size;
-	buf->direction = dir;
-	buf->pool = pool;
-
-	if (pool) {
-		buf->safe = dma_pool_alloc(pool->pool, GFP_ATOMIC,
-					   &buf->safe_dma_addr);
-	} else {
-		buf->safe = dma_alloc_coherent(dev, size, &buf->safe_dma_addr,
-					       GFP_ATOMIC);
-	}
-
-	if (buf->safe == NULL) {
-		dev_warn(dev,
-			 "%s: could not alloc dma memory (size=%d)\n",
-			 __func__, size);
-		kfree(buf);
-		return NULL;
-	}
-
-#ifdef STATS
-	if (pool)
-		pool->allocs++;
-	device_info->total_allocs++;
-#endif
-
-	write_lock_irqsave(&device_info->lock, flags);
-	list_add(&buf->node, &device_info->safe_buffers);
-	write_unlock_irqrestore(&device_info->lock, flags);
-
-	return buf;
-}
-
-/* determine if a buffer is from our "safe" pool */
-static inline struct safe_buffer *
-find_safe_buffer(struct dmabounce_device_info *device_info, dma_addr_t safe_dma_addr)
-{
-	struct safe_buffer *b, *rb = NULL;
-	unsigned long flags;
-
-	read_lock_irqsave(&device_info->lock, flags);
-
-	list_for_each_entry(b, &device_info->safe_buffers, node)
-		if (b->safe_dma_addr <= safe_dma_addr &&
-		    b->safe_dma_addr + b->size > safe_dma_addr) {
-			rb = b;
-			break;
-		}
-
-	read_unlock_irqrestore(&device_info->lock, flags);
-	return rb;
-}
-
-static inline void
-free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *buf)
-{
-	unsigned long flags;
-
-	dev_dbg(device_info->dev, "%s(buf=%p)\n", __func__, buf);
-
-	write_lock_irqsave(&device_info->lock, flags);
-
-	list_del(&buf->node);
-
-	write_unlock_irqrestore(&device_info->lock, flags);
-
-	if (buf->pool)
-		dma_pool_free(buf->pool->pool, buf->safe, buf->safe_dma_addr);
-	else
-		dma_free_coherent(device_info->dev, buf->size, buf->safe,
-				    buf->safe_dma_addr);
-
-	kfree(buf);
-}
-
-/* ************************************************** */
-
-static struct safe_buffer *find_safe_buffer_dev(struct device *dev,
-		dma_addr_t dma_addr, const char *where)
-{
-	if (!dev || !dev->archdata.dmabounce)
-		return NULL;
-	if (dma_mapping_error(dev, dma_addr)) {
-		dev_err(dev, "Trying to %s invalid mapping\n", where);
-		return NULL;
-	}
-	return find_safe_buffer(dev->archdata.dmabounce, dma_addr);
-}
-
-static int needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
-	if (!dev || !dev->archdata.dmabounce)
-		return 0;
-
-	if (dev->dma_mask) {
-		unsigned long limit, mask = *dev->dma_mask;
-
-		limit = (mask + 1) & ~mask;
-		if (limit && size > limit) {
-			dev_err(dev, "DMA mapping too big (requested %#x "
-				"mask %#Lx)\n", size, *dev->dma_mask);
-			return -E2BIG;
-		}
-
-		/* Figure out if we need to bounce from the DMA mask. */
-		if ((dma_addr | (dma_addr + size - 1)) & ~mask)
-			return 1;
-	}
-
-	return !!dev->archdata.dmabounce->needs_bounce(dev, dma_addr, size);
-}
-
-static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
-				    enum dma_data_direction dir,
-				    unsigned long attrs)
-{
-	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
-	struct safe_buffer *buf;
-
-	if (device_info)
-		DO_STATS ( device_info->map_op_count++ );
-
-	buf = alloc_safe_buffer(device_info, ptr, size, dir);
-	if (buf == NULL) {
-		dev_err(dev, "%s: unable to map unsafe buffer %p!\n",
-		       __func__, ptr);
-		return DMA_MAPPING_ERROR;
-	}
-
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
-		buf->safe, buf->safe_dma_addr);
-
-	if ((dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) &&
-	    !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) {
-		dev_dbg(dev, "%s: copy unsafe %p to safe %p, size %d\n",
-			__func__, ptr, buf->safe, size);
-		memcpy(buf->safe, ptr, size);
-	}
-
-	return buf->safe_dma_addr;
-}
-
-static inline void unmap_single(struct device *dev, struct safe_buffer *buf,
-				size_t size, enum dma_data_direction dir,
-				unsigned long attrs)
-{
-	BUG_ON(buf->size != size);
-	BUG_ON(buf->direction != dir);
-
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
-		buf->safe, buf->safe_dma_addr);
-
-	DO_STATS(dev->archdata.dmabounce->bounce_count++);
-
-	if ((dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) &&
-	    !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) {
-		void *ptr = buf->ptr;
-
-		dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n",
-			__func__, buf->safe, ptr, size);
-		memcpy(ptr, buf->safe, size);
-
-		/*
-		 * Since we may have written to a page cache page,
-		 * we need to ensure that the data will be coherent
-		 * with user mappings.
-		 */
-		__cpuc_flush_dcache_area(ptr, size);
-	}
-	free_safe_buffer(dev->archdata.dmabounce, buf);
-}
-
-/* ************************************************** */
-
-/*
- * see if a buffer address is in an 'unsafe' range.  if it is
- * allocate a 'safe' buffer and copy the unsafe buffer into it.
- * substitute the safe buffer for the unsafe one.
- * (basically move the buffer from an unsafe area to a safe one)
- */
-static dma_addr_t dmabounce_map_page(struct device *dev, struct page *page,
-		unsigned long offset, size_t size, enum dma_data_direction dir,
-		unsigned long attrs)
-{
-	dma_addr_t dma_addr;
-	int ret;
-
-	dev_dbg(dev, "%s(page=%p,off=%#lx,size=%zx,dir=%x)\n",
-		__func__, page, offset, size, dir);
-
-	dma_addr = pfn_to_dma(dev, page_to_pfn(page)) + offset;
-
-	ret = needs_bounce(dev, dma_addr, size);
-	if (ret < 0)
-		return DMA_MAPPING_ERROR;
-
-	if (ret == 0) {
-		arm_dma_ops.sync_single_for_device(dev, dma_addr, size, dir);
-		return dma_addr;
-	}
-
-	if (PageHighMem(page)) {
-		dev_err(dev, "DMA buffer bouncing of HIGHMEM pages is not supported\n");
-		return DMA_MAPPING_ERROR;
-	}
-
-	return map_single(dev, page_address(page) + offset, size, dir, attrs);
-}
-
-/*
- * see if a mapped address was really a "safe" buffer and if so, copy
- * the data from the safe buffer back to the unsafe buffer and free up
- * the safe buffer.  (basically return things back to the way they
- * should be)
- */
-static void dmabounce_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
-		enum dma_data_direction dir, unsigned long attrs)
-{
-	struct safe_buffer *buf;
-
-	dev_dbg(dev, "%s(dma=%#x,size=%d,dir=%x)\n",
-		__func__, dma_addr, size, dir);
-
-	buf = find_safe_buffer_dev(dev, dma_addr, __func__);
-	if (!buf) {
-		arm_dma_ops.sync_single_for_cpu(dev, dma_addr, size, dir);
-		return;
-	}
-
-	unmap_single(dev, buf, size, dir, attrs);
-}
-
-static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
-		size_t sz, enum dma_data_direction dir)
-{
-	struct safe_buffer *buf;
-	unsigned long off;
-
-	dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
-		__func__, addr, sz, dir);
-
-	buf = find_safe_buffer_dev(dev, addr, __func__);
-	if (!buf)
-		return 1;
-
-	off = addr - buf->safe_dma_addr;
-
-	BUG_ON(buf->direction != dir);
-
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
-		buf->safe, buf->safe_dma_addr);
-
-	DO_STATS(dev->archdata.dmabounce->bounce_count++);
-
-	if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
-		dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n",
-			__func__, buf->safe + off, buf->ptr + off, sz);
-		memcpy(buf->ptr + off, buf->safe + off, sz);
-	}
-	return 0;
-}
-
-static void dmabounce_sync_for_cpu(struct device *dev,
-		dma_addr_t handle, size_t size, enum dma_data_direction dir)
-{
-	if (!__dmabounce_sync_for_cpu(dev, handle, size, dir))
-		return;
-
-	arm_dma_ops.sync_single_for_cpu(dev, handle, size, dir);
-}
-
-static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
-		size_t sz, enum dma_data_direction dir)
-{
-	struct safe_buffer *buf;
-	unsigned long off;
-
-	dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
-		__func__, addr, sz, dir);
-
-	buf = find_safe_buffer_dev(dev, addr, __func__);
-	if (!buf)
-		return 1;
-
-	off = addr - buf->safe_dma_addr;
-
-	BUG_ON(buf->direction != dir);
-
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
-		buf->safe, buf->safe_dma_addr);
-
-	DO_STATS(dev->archdata.dmabounce->bounce_count++);
-
-	if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) {
-		dev_dbg(dev, "%s: copy out unsafe %p to safe %p, size %d\n",
-			__func__,buf->ptr + off, buf->safe + off, sz);
-		memcpy(buf->safe + off, buf->ptr + off, sz);
-	}
-	return 0;
-}
-
-static void dmabounce_sync_for_device(struct device *dev,
-		dma_addr_t handle, size_t size, enum dma_data_direction dir)
-{
-	if (!__dmabounce_sync_for_device(dev, handle, size, dir))
-		return;
-
-	arm_dma_ops.sync_single_for_device(dev, handle, size, dir);
-}
-
-static int dmabounce_dma_supported(struct device *dev, u64 dma_mask)
-{
-	if (dev->archdata.dmabounce)
-		return 0;
-
-	return arm_dma_ops.dma_supported(dev, dma_mask);
-}
-
-static const struct dma_map_ops dmabounce_ops = {
-	.alloc			= arm_dma_alloc,
-	.free			= arm_dma_free,
-	.mmap			= arm_dma_mmap,
-	.get_sgtable		= arm_dma_get_sgtable,
-	.map_page		= dmabounce_map_page,
-	.unmap_page		= dmabounce_unmap_page,
-	.sync_single_for_cpu	= dmabounce_sync_for_cpu,
-	.sync_single_for_device	= dmabounce_sync_for_device,
-	.map_sg			= arm_dma_map_sg,
-	.unmap_sg		= arm_dma_unmap_sg,
-	.sync_sg_for_cpu	= arm_dma_sync_sg_for_cpu,
-	.sync_sg_for_device	= arm_dma_sync_sg_for_device,
-	.dma_supported		= dmabounce_dma_supported,
-};
-
-static int dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev,
-		const char *name, unsigned long size)
-{
-	pool->size = size;
-	DO_STATS(pool->allocs = 0);
-	pool->pool = dma_pool_create(name, dev, size,
-				     0 /* byte alignment */,
-				     0 /* no page-crossing issues */);
-
-	return pool->pool ? 0 : -ENOMEM;
-}
-
-int dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
-		unsigned long large_buffer_size,
-		int (*needs_bounce_fn)(struct device *, dma_addr_t, size_t))
-{
-	struct dmabounce_device_info *device_info;
-	int ret;
-
-	device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC);
-	if (!device_info) {
-		dev_err(dev,
-			"Could not allocated dmabounce_device_info\n");
-		return -ENOMEM;
-	}
-
-	ret = dmabounce_init_pool(&device_info->small, dev,
-				  "small_dmabounce_pool", small_buffer_size);
-	if (ret) {
-		dev_err(dev,
-			"dmabounce: could not allocate DMA pool for %ld byte objects\n",
-			small_buffer_size);
-		goto err_free;
-	}
-
-	if (large_buffer_size) {
-		ret = dmabounce_init_pool(&device_info->large, dev,
-					  "large_dmabounce_pool",
-					  large_buffer_size);
-		if (ret) {
-			dev_err(dev,
-				"dmabounce: could not allocate DMA pool for %ld byte objects\n",
-				large_buffer_size);
-			goto err_destroy;
-		}
-	}
-
-	device_info->dev = dev;
-	INIT_LIST_HEAD(&device_info->safe_buffers);
-	rwlock_init(&device_info->lock);
-	device_info->needs_bounce = needs_bounce_fn;
-
-#ifdef STATS
-	device_info->total_allocs = 0;
-	device_info->map_op_count = 0;
-	device_info->bounce_count = 0;
-	device_info->attr_res = device_create_file(dev, &dev_attr_dmabounce_stats);
-#endif
-
-	dev->archdata.dmabounce = device_info;
-	set_dma_ops(dev, &dmabounce_ops);
-
-	dev_info(dev, "dmabounce: registered device\n");
-
-	return 0;
-
- err_destroy:
-	dma_pool_destroy(device_info->small.pool);
- err_free:
-	kfree(device_info);
-	return ret;
-}
-EXPORT_SYMBOL(dmabounce_register_dev);
-
-void dmabounce_unregister_dev(struct device *dev)
-{
-	struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
-
-	dev->archdata.dmabounce = NULL;
-	set_dma_ops(dev, NULL);
-
-	if (!device_info) {
-		dev_warn(dev,
-			 "Never registered with dmabounce but attempting"
-			 "to unregister!\n");
-		return;
-	}
-
-	if (!list_empty(&device_info->safe_buffers)) {
-		dev_err(dev,
-			"Removing from dmabounce with pending buffers!\n");
-		BUG();
-	}
-
-	if (device_info->small.pool)
-		dma_pool_destroy(device_info->small.pool);
-	if (device_info->large.pool)
-		dma_pool_destroy(device_info->large.pool);
-
-#ifdef STATS
-	if (device_info->attr_res == 0)
-		device_remove_file(dev, &dev_attr_dmabounce_stats);
-#endif
-
-	kfree(device_info);
-
-	dev_info(dev, "dmabounce: device unregistered\n");
-}
-EXPORT_SYMBOL(dmabounce_unregister_dev);
-
-MODULE_AUTHOR("Christopher Hoover <ch@hpl.hp.com>, Deepak Saxena <dsaxena@plexity.net>");
-MODULE_DESCRIPTION("Special dma_{map/unmap/dma_sync}_* routines for systems with limited DMA windows");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index e45f4e4e06b6..309b74783468 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -23,7 +23,6 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
@@ -495,7 +494,7 @@ static int locomo_probe(struct platform_device *dev)
 	return __locomo_probe(&dev->dev, mem, irq);
 }
 
-static int locomo_remove(struct platform_device *dev)
+static void locomo_remove(struct platform_device *dev)
 {
 	struct locomo *lchip = platform_get_drvdata(dev);
 
@@ -503,8 +502,6 @@ static int locomo_remove(struct platform_device *dev)
 		__locomo_remove(lchip);
 		platform_set_drvdata(dev, NULL);
 	}
-
-	return 0;
 }
 
 /*
@@ -515,7 +512,7 @@ static int locomo_remove(struct platform_device *dev)
  */
 static struct platform_driver locomo_device_driver = {
 	.probe		= locomo_probe,
-	.remove		= locomo_remove,
+	.remove_new	= locomo_remove,
 #ifdef CONFIG_PM
 	.suspend	= locomo_suspend,
 	.resume		= locomo_resume,
@@ -834,14 +831,13 @@ static int locomo_bus_probe(struct device *dev)
 	return ret;
 }
 
-static int locomo_bus_remove(struct device *dev)
+static void locomo_bus_remove(struct device *dev)
 {
 	struct locomo_dev *ldev = LOCOMO_DEV(dev);
 	struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
 
 	if (drv->remove)
 		drv->remove(ldev);
-	return 0;
 }
 
 struct bus_type locomo_bus_type = {
diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S
index 291d969bc719..299495c43dfd 100644
--- a/arch/arm/common/mcpm_head.S
+++ b/arch/arm/common/mcpm_head.S
@@ -15,6 +15,8 @@
 
 #include "vlock.h"
 
+.arch armv7-a
+
 .if MCPM_SYNC_CLUSTER_CPUS
 .error "cpus must be the first member of struct mcpm_sync_struct"
 .endif
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index ff5e0d04cb89..aad6ba236f0f 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -26,13 +26,16 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 #include <asm/mach-types.h>
 #include <linux/sizes.h>
 
 #include <asm/hardware/sa1111.h>
 
+#ifdef CONFIG_ARCH_SA1100
+#include <mach/hardware.h>
+#endif
+
 /* SA1111 IRQs */
 #define IRQ_GPAIN0		(0)
 #define IRQ_GPAIN1		(1)
@@ -196,14 +199,6 @@ static int sa1111_map_irq(struct sa1111 *sachip, irq_hw_number_t hwirq)
 	return irq_create_mapping(sachip->irqdomain, hwirq);
 }
 
-static void sa1111_handle_irqdomain(struct irq_domain *irqdomain, int irq)
-{
-	struct irq_desc *d = irq_to_desc(irq_linear_revmap(irqdomain, irq));
-
-	if (d)
-		generic_handle_irq_desc(d);
-}
-
 /*
  * SA1111 interrupt support.  Since clearing an IRQ while there are
  * active IRQs causes the interrupt output to pulse, the upper levels
@@ -234,11 +229,11 @@ static void sa1111_irq_handler(struct irq_desc *desc)
 
 	for (i = 0; stat0; i++, stat0 >>= 1)
 		if (stat0 & 1)
-			sa1111_handle_irqdomain(irqdomain, i);
+			generic_handle_domain_irq(irqdomain, i);
 
 	for (i = 32; stat1; i++, stat1 >>= 1)
 		if (stat1 & 1)
-			sa1111_handle_irqdomain(irqdomain, i);
+			generic_handle_domain_irq(irqdomain, i);
 
 	/* For level-based interrupts */
 	desc->irq_data.chip->irq_unmask(&desc->irq_data);
@@ -1128,7 +1123,7 @@ static int sa1111_probe(struct platform_device *pdev)
 	return __sa1111_probe(&pdev->dev, mem, irq);
 }
 
-static int sa1111_remove(struct platform_device *pdev)
+static void sa1111_remove(struct platform_device *pdev)
 {
 	struct sa1111 *sachip = platform_get_drvdata(pdev);
 
@@ -1140,8 +1135,6 @@ static int sa1111_remove(struct platform_device *pdev)
 		__sa1111_remove(sachip);
 		platform_set_drvdata(pdev, NULL);
 	}
-
-	return 0;
 }
 
 static struct dev_pm_ops sa1111_pm_ops = {
@@ -1160,7 +1153,7 @@ static struct dev_pm_ops sa1111_pm_ops = {
  */
 static struct platform_driver sa1111_device_driver = {
 	.probe		= sa1111_probe,
-	.remove		= sa1111_remove,
+	.remove_new	= sa1111_remove,
 	.driver		= {
 		.name	= "sa1111",
 		.pm	= &sa1111_pm_ops,
@@ -1364,15 +1357,13 @@ static int sa1111_bus_probe(struct device *dev)
 	return ret;
 }
 
-static int sa1111_bus_remove(struct device *dev)
+static void sa1111_bus_remove(struct device *dev)
 {
 	struct sa1111_dev *sadev = to_sa1111_device(dev);
 	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
 
 	if (drv->remove)
 		drv->remove(sadev);
-
-	return 0;
 }
 
 struct bus_type sa1111_bus_type = {
@@ -1396,70 +1387,9 @@ void sa1111_driver_unregister(struct sa1111_driver *driver)
 }
 EXPORT_SYMBOL(sa1111_driver_unregister);
 
-#ifdef CONFIG_DMABOUNCE
-/*
- * According to the "Intel StrongARM SA-1111 Microprocessor Companion
- * Chip Specification Update" (June 2000), erratum #7, there is a
- * significant bug in the SA1111 SDRAM shared memory controller.  If
- * an access to a region of memory above 1MB relative to the bank base,
- * it is important that address bit 10 _NOT_ be asserted. Depending
- * on the configuration of the RAM, bit 10 may correspond to one
- * of several different (processor-relative) address bits.
- *
- * This routine only identifies whether or not a given DMA address
- * is susceptible to the bug.
- *
- * This should only get called for sa1111_device types due to the
- * way we configure our device dma_masks.
- */
-static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
-{
-	/*
-	 * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
-	 * User's Guide" mentions that jumpers R51 and R52 control the
-	 * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
-	 * SDRAM bank 1 on Neponset). The default configuration selects
-	 * Assabet, so any address in bank 1 is necessarily invalid.
-	 */
-	return (machine_is_assabet() || machine_is_pfs168()) &&
-		(addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
-}
-
-static int sa1111_notifier_call(struct notifier_block *n, unsigned long action,
-	void *data)
-{
-	struct sa1111_dev *dev = to_sa1111_device(data);
-
-	switch (action) {
-	case BUS_NOTIFY_ADD_DEVICE:
-		if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) {
-			int ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
-					sa1111_needs_bounce);
-			if (ret)
-				dev_err(&dev->dev, "failed to register with dmabounce: %d\n", ret);
-		}
-		break;
-
-	case BUS_NOTIFY_DEL_DEVICE:
-		if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL)
-			dmabounce_unregister_dev(&dev->dev);
-		break;
-	}
-	return NOTIFY_OK;
-}
-
-static struct notifier_block sa1111_bus_notifier = {
-	.notifier_call = sa1111_notifier_call,
-};
-#endif
-
 static int __init sa1111_init(void)
 {
 	int ret = bus_register(&sa1111_bus_type);
-#ifdef CONFIG_DMABOUNCE
-	if (ret == 0)
-		bus_register_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
-#endif
 	if (ret == 0)
 		platform_driver_register(&sa1111_device_driver);
 	return ret;
@@ -1468,9 +1398,6 @@ static int __init sa1111_init(void)
 static void __exit sa1111_exit(void)
 {
 	platform_driver_unregister(&sa1111_device_driver);
-#ifdef CONFIG_DMABOUNCE
-	bus_unregister_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
-#endif
 	bus_unregister(&sa1111_bus_type);
 }
 
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 6edb961bd6c1..9018c7240166 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -236,26 +236,21 @@ err_ioremap:
 	return ret;
 }
 
-static int scoop_remove(struct platform_device *pdev)
+static void scoop_remove(struct platform_device *pdev)
 {
 	struct scoop_dev *sdev = platform_get_drvdata(pdev);
 
-	if (!sdev)
-		return -EINVAL;
-
 	if (sdev->gpio.base != -1)
 		gpiochip_remove(&sdev->gpio);
 
 	platform_set_drvdata(pdev, NULL);
 	iounmap(sdev->base);
 	kfree(sdev);
-
-	return 0;
 }
 
 static struct platform_driver scoop_driver = {
 	.probe		= scoop_probe,
-	.remove		= scoop_remove,
+	.remove_new	= scoop_remove,
 	.suspend	= scoop_suspend,
 	.resume		= scoop_resume,
 	.driver		= {
diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c
index efeb5724d9e9..6237ede2f0c7 100644
--- a/arch/arm/common/sharpsl_param.c
+++ b/arch/arm/common/sharpsl_param.c
@@ -40,7 +40,9 @@ EXPORT_SYMBOL(sharpsl_param);
 
 void sharpsl_save_param(void)
 {
-	memcpy(&sharpsl_param, param_start(PARAM_BASE), sizeof(struct sharpsl_param_info));
+	struct sharpsl_param_info *params = param_start(PARAM_BASE);
+
+	memcpy(&sharpsl_param, params, sizeof(*params));
 
 	if (sharpsl_param.comadj_keyword != COMADJ_MAGIC)
 		sharpsl_param.comadj=-1;
diff --git a/arch/arm/common/vlock.S b/arch/arm/common/vlock.S
index f1c7fd44f1b1..1fa09c4697ed 100644
--- a/arch/arm/common/vlock.S
+++ b/arch/arm/common/vlock.S
@@ -12,6 +12,8 @@
 #include <linux/linkage.h>
 #include "vlock.h"
 
+.arch armv7-a
+
 /* Select different code if voting flags  can fit in a single word. */
 #if VLOCK_VOTING_SIZE > 4
 #define FEW(x...)
diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig
index 4e49d6cb2f62..3f633eaf9770 100644
--- a/arch/arm/configs/am200epdkit_defconfig
+++ b/arch/arm/configs/am200epdkit_defconfig
@@ -1,24 +1,22 @@
 CONFIG_LOCALVERSION="gum"
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_PREEMPT=y
 CONFIG_EXPERT=y
 # CONFIG_EPOLL is not set
 # CONFIG_SHMEM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_ARCH_GUMSTIX=y
-CONFIG_PCCARD=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 root=1f01 rootfstype=jffs2"
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
+# CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=m
 CONFIG_UNIX=y
@@ -34,6 +32,7 @@ CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
+CONFIG_PCCARD=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
@@ -47,14 +46,15 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PXA2XX=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_SD=m
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=m
 CONFIG_PATA_PCMCIA=m
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=m
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -83,16 +83,15 @@ CONFIG_VFAT_FS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_RUBIN=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_ARC4=m
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig
index 58d293b63581..a5c65d28ca63 100644
--- a/arch/arm/configs/aspeed_g4_defconfig
+++ b/arch/arm/configs/aspeed_g4_defconfig
@@ -1,12 +1,13 @@
 CONFIG_KERNEL_XZ=y
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_CGROUPS=y
+CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZO is not set
@@ -14,33 +15,26 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSFS_SYSCALL is not set
 # CONFIG_AIO is not set
-CONFIG_BPF_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_SLAB_FREELIST_RANDOM=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_ASPEED=y
 CONFIG_MACH_ASPEED_G4=y
 CONFIG_VMSPLIT_2G=y
 CONFIG_AEABI=y
 CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_SECCOMP=y
 # CONFIG_ATAGS is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_KEXEC=y
-CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_JUMP_LABEL=y
 CONFIG_STRICT_KERNEL_RWX=y
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEBUG_FS is not set
 # CONFIG_MQ_IOSCHED_DEADLINE is not set
 # CONFIG_MQ_IOSCHED_KYBER is not set
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB_FREELIST_RANDOM=y
+CONFIG_SLAB_FREELIST_HARDENED=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -51,6 +45,11 @@ CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_DIAG is not set
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+# CONFIG_IPV6_SIT is not set
+CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_ADVANCED is not set
 CONFIG_VLAN_8021Q=y
@@ -59,16 +58,17 @@ CONFIG_NET_NCSI=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_PARTITIONED_MASTER=y
 CONFIG_MTD_SPI_NOR=y
 # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_SPI_ASPEED_SMC=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
 CONFIG_EEPROM_AT24=y
 CONFIG_NETDEVICES=y
 CONFIG_NETCONSOLE=y
@@ -76,7 +76,6 @@ CONFIG_NETCONSOLE=y
 # CONFIG_NET_VENDOR_AMAZON is not set
 # CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_VENDOR_AURORA is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CADENCE is not set
 # CONFIG_NET_VENDOR_CAVIUM is not set
@@ -91,9 +90,9 @@ CONFIG_FTGMAC100=y
 # CONFIG_NET_VENDOR_MELLANOX is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_MICROSEMI is not set
+# CONFIG_NET_VENDOR_NI is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
 # CONFIG_NET_VENDOR_NETRONOME is not set
-# CONFIG_NET_VENDOR_NI is not set
 # CONFIG_NET_VENDOR_QUALCOMM is not set
 # CONFIG_NET_VENDOR_RENESAS is not set
 # CONFIG_NET_VENDOR_ROCKER is not set
@@ -132,15 +131,16 @@ CONFIG_ASPEED_BT_IPMI_BMC=y
 CONFIG_HW_RANDOM_TIMERIOMEM=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA9541=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_ASPEED=y
 CONFIG_I2C_FSI=y
 CONFIG_SPI=y
+CONFIG_SPI_ASPEED_SMC=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_ASPEED=y
+CONFIG_GPIO_ASPEED_SGPIO=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_GPIO=y
 CONFIG_W1_SLAVE_THERM=y
@@ -148,6 +148,7 @@ CONFIG_SENSORS_ASPEED=y
 CONFIG_SENSORS_IIO_HWMON=y
 CONFIG_SENSORS_LM75=y
 CONFIG_SENSORS_NCT7904=y
+CONFIG_SENSORS_OCC_P8_I2C=y
 CONFIG_PMBUS=y
 CONFIG_SENSORS_ADM1275=y
 CONFIG_SENSORS_IBM_CFFPS=y
@@ -205,6 +206,7 @@ CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_EDAC=y
+CONFIG_EDAC_ASPEED=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_PCF8523=y
@@ -212,9 +214,6 @@ CONFIG_RTC_DRV_RV8803=y
 CONFIG_RTC_DRV_ASPEED=y
 # CONFIG_VIRTIO_MENU is not set
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_ASPEED_LPC_CTRL=y
-CONFIG_ASPEED_LPC_SNOOP=y
-CONFIG_ASPEED_P2A_CTRL=y
 CONFIG_IIO=y
 CONFIG_ASPEED_ADC=y
 CONFIG_MAX1363=y
@@ -249,11 +248,12 @@ CONFIG_CRYPTO_USER_API_HASH=y
 # CONFIG_XZ_DEC_SPARC is not set
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_REDUCED=y
 CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_DEBUG_INFO_REDUCED=y
 CONFIG_GDB_SCRIPTS=y
 CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_WX=y
 CONFIG_SCHED_STACK_END_CHECK=y
 CONFIG_PANIC_ON_OOPS=y
 CONFIG_PANIC_TIMEOUT=-1
@@ -262,6 +262,5 @@ CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_WQ_WATCHDOG=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_FUNCTION_TRACER=y
-CONFIG_DEBUG_WX=y
 CONFIG_DEBUG_USER=y
 # CONFIG_RUNTIME_TESTING_MENU is not set
diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig
index 047975eccefb..c7c11cbaa39d 100644
--- a/arch/arm/configs/aspeed_g5_defconfig
+++ b/arch/arm/configs/aspeed_g5_defconfig
@@ -1,12 +1,13 @@
 CONFIG_KERNEL_XZ=y
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_CGROUPS=y
+CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZO is not set
@@ -14,12 +15,8 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSFS_SYSCALL is not set
 # CONFIG_AIO is not set
-CONFIG_BPF_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_SLAB_FREELIST_RANDOM=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_ASPEED=y
 CONFIG_MACH_ASPEED_G5=y
@@ -31,21 +28,20 @@ CONFIG_VMSPLIT_2G=y
 CONFIG_NR_CPUS=2
 CONFIG_HIGHMEM=y
 CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_SECCOMP=y
 # CONFIG_ATAGS is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_KEXEC=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
-CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_JUMP_LABEL=y
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEBUG_FS is not set
 # CONFIG_MQ_IOSCHED_DEADLINE is not set
 # CONFIG_MQ_IOSCHED_KYBER is not set
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB_FREELIST_RANDOM=y
+CONFIG_SLAB_FREELIST_HARDENED=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -63,33 +59,38 @@ CONFIG_SYN_COOKIES=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_IPV6_OPTIMISTIC_DAD=y
+# CONFIG_IPV6_SIT is not set
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_ADVANCED is not set
 CONFIG_VLAN_8021Q=y
 CONFIG_NET_NCSI=y
+CONFIG_MCTP=y
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_PARTITIONED_MASTER=y
 CONFIG_MTD_SPI_NOR=y
 # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_SPI_ASPEED_SMC=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
 CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_NETCONSOLE=y
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 # CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_VENDOR_AURORA is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CADENCE is not set
 # CONFIG_NET_VENDOR_CAVIUM is not set
@@ -104,9 +105,9 @@ CONFIG_FTGMAC100=y
 # CONFIG_NET_VENDOR_MELLANOX is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_MICROSEMI is not set
+# CONFIG_NET_VENDOR_NI is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
 # CONFIG_NET_VENDOR_NETRONOME is not set
-# CONFIG_NET_VENDOR_NI is not set
 # CONFIG_NET_VENDOR_QUALCOMM is not set
 # CONFIG_NET_VENDOR_RENESAS is not set
 # CONFIG_NET_VENDOR_ROCKER is not set
@@ -121,6 +122,8 @@ CONFIG_FTGMAC100=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_BROADCOM_PHY=y
 CONFIG_REALTEK_PHY=y
+CONFIG_MCTP_SERIAL=y
+CONFIG_MCTP_TRANSPORT_I2C=y
 # CONFIG_USB_NET_DRIVERS is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
@@ -130,7 +133,7 @@ CONFIG_KEYBOARD_GPIO_POLLED=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_IBM_PANEL=y
-# CONFIG_SERIO is not set
+CONFIG_SERIO_RAW=y
 # CONFIG_VT is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
@@ -144,11 +147,14 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_ASPEED_KCS_IPMI_BMC=y
+CONFIG_IPMI_KCS_BMC_CDEV_IPMI=y
+CONFIG_IPMI_KCS_BMC_SERIO=y
 CONFIG_ASPEED_BT_IPMI_BMC=y
 CONFIG_HW_RANDOM_TIMERIOMEM=y
+CONFIG_TCG_TPM=y
+CONFIG_TCG_TIS_I2C=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_GPIO=y
 CONFIG_I2C_MUX_PCA9541=y
 CONFIG_I2C_MUX_PCA954x=y
@@ -156,25 +162,35 @@ CONFIG_I2C_ASPEED=y
 CONFIG_I2C_FSI=y
 CONFIG_I2C_SLAVE=y
 CONFIG_SPI=y
+CONFIG_SPI_ASPEED_SMC=y
+CONFIG_SPI_FSI=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_ASPEED=y
 CONFIG_GPIO_ASPEED_SGPIO=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_GPIO=y
 CONFIG_W1_SLAVE_THERM=y
+CONFIG_SENSORS_ADT7475=y
 CONFIG_SENSORS_ASPEED=y
 CONFIG_SENSORS_IIO_HWMON=y
 CONFIG_SENSORS_LM75=y
 CONFIG_SENSORS_NCT7904=y
+CONFIG_SENSORS_OCC_P9_SBE=y
 CONFIG_PMBUS=y
 CONFIG_SENSORS_ADM1275=y
 CONFIG_SENSORS_IBM_CFFPS=y
 CONFIG_SENSORS_IR35221=y
+CONFIG_SENSORS_IR38064=y
+CONFIG_SENSORS_ISL68137=y
 CONFIG_SENSORS_LM25066=y
 CONFIG_SENSORS_MAX31785=y
+CONFIG_SENSORS_MP5023=y
 CONFIG_SENSORS_UCD9000=y
 CONFIG_SENSORS_UCD9200=y
+CONFIG_SENSORS_SBTSI=y
 CONFIG_SENSORS_TMP421=y
 CONFIG_SENSORS_W83773G=y
 CONFIG_WATCHDOG_SYSFS=y
@@ -185,29 +201,21 @@ CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_ASPEED=y
 CONFIG_DRM=y
 CONFIG_DRM_ASPEED_GFX=y
+CONFIG_FB=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DYNAMIC_MINORS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_PL2303=y
 CONFIG_USB_GADGET=y
-CONFIG_U_SERIAL_CONSOLE=y
 CONFIG_USB_ASPEED_VHUB=y
 CONFIG_USB_CONFIGFS=y
-CONFIG_USB_CONFIGFS_SERIAL=y
-CONFIG_USB_CONFIGFS_ACM=y
-CONFIG_USB_CONFIGFS_OBEX=y
-CONFIG_USB_CONFIGFS_NCM=y
-CONFIG_USB_CONFIGFS_ECM=y
-CONFIG_USB_CONFIGFS_ECM_SUBSET=y
-CONFIG_USB_CONFIGFS_RNDIS=y
-CONFIG_USB_CONFIGFS_EEM=y
 CONFIG_USB_CONFIGFS_MASS_STORAGE=y
-CONFIG_USB_CONFIGFS_F_LB_SS=y
-CONFIG_USB_CONFIGFS_F_FS=y
 CONFIG_USB_CONFIGFS_F_HID=y
-CONFIG_USB_CONFIGFS_F_PRINTER=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
@@ -231,13 +239,12 @@ CONFIG_RTC_DRV_RV8803=y
 CONFIG_RTC_DRV_ASPEED=y
 # CONFIG_VIRTIO_MENU is not set
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_ASPEED_LPC_CTRL=y
-CONFIG_ASPEED_LPC_SNOOP=y
-CONFIG_ASPEED_P2A_CTRL=y
 CONFIG_IIO=y
 CONFIG_ASPEED_ADC=y
 CONFIG_MAX1363=y
+CONFIG_SI7020=y
 CONFIG_BMP280=y
+CONFIG_DPS310=y
 CONFIG_RAS=y
 CONFIG_FSI=y
 CONFIG_FSI_MASTER_GPIO=y
@@ -247,8 +254,13 @@ CONFIG_FSI_MASTER_ASPEED=y
 CONFIG_FSI_SCOM=y
 CONFIG_FSI_SBEFIFO=y
 CONFIG_FSI_OCC=y
+CONFIG_PECI=y
+CONFIG_PECI_CPU=y
+CONFIG_PECI_ASPEED=y
+CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
 CONFIG_OVERLAY_FS=y
+CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 # CONFIG_JFFS2_FS_WRITEBUFFER is not set
@@ -258,7 +270,15 @@ CONFIG_UBIFS_FS=y
 CONFIG_SQUASHFS=y
 CONFIG_SQUASHFS_XZ=y
 CONFIG_SQUASHFS_ZSTD=y
+CONFIG_PSTORE=y
+CONFIG_PSTORE_CONSOLE=y
+CONFIG_PSTORE_PMSG=y
+CONFIG_PSTORE_FTRACE=y
+CONFIG_PSTORE_RAM=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_SECURITYFS is not set
 CONFIG_HARDENED_USERCOPY=y
 CONFIG_FORTIFY_SOURCE=y
 CONFIG_CRYPTO_HMAC=y
@@ -271,19 +291,20 @@ CONFIG_CRYPTO_USER_API_HASH=y
 # CONFIG_XZ_DEC_SPARC is not set
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_REDUCED=y
 CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_DEBUG_INFO_REDUCED=y
 CONFIG_GDB_SCRIPTS=y
 CONFIG_STRIP_ASM_SYMS=y
-CONFIG_SOFTLOCKUP_DETECTOR=y
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_WQ_WATCHDOG=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_WX=y
+CONFIG_SCHED_STACK_END_CHECK=y
 CONFIG_PANIC_ON_OOPS=y
 CONFIG_PANIC_TIMEOUT=-1
+CONFIG_SOFTLOCKUP_DETECTOR=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+CONFIG_WQ_WATCHDOG=y
 # CONFIG_SCHED_DEBUG is not set
-CONFIG_SCHED_STACK_END_CHECK=y
 CONFIG_FUNCTION_TRACER=y
-# CONFIG_RUNTIME_TESTING_MENU is not set
-CONFIG_DEBUG_WX=y
 CONFIG_DEBUG_USER=y
+# CONFIG_RUNTIME_TESTING_MENU is not set
diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig
index 04c86ff558da..8ba8eb7a4adf 100644
--- a/arch/arm/configs/assabet_defconfig
+++ b/arch/arm/configs/assabet_defconfig
@@ -1,25 +1,21 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_ASSABET=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttySA0,38400n8 initrd=0xc0800000,3M root=/dev/ram"
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_SA1100_FIR=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
 CONFIG_MTD=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -46,11 +42,14 @@ CONFIG_FB=y
 CONFIG_FB_SA1100=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_SOUND=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_EXT2_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 6403b064e8dc..82bcf4dc7f54 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -1,12 +1,13 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
 CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
@@ -24,8 +25,9 @@ CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 r
 CONFIG_KEXEC=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -38,7 +40,6 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_DIAG is not set
 CONFIG_IPV6_SIT_6RD=y
 CONFIG_CAN=y
-CONFIG_CAN_AT91=y
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_DEVTMPFS=y
@@ -46,14 +47,15 @@ CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_MTD=y
+CONFIG_MTD_TESTS=m
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
@@ -62,6 +64,7 @@ CONFIG_ATMEL_SSC=y
 CONFIG_EEPROM_AT24=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -77,6 +80,7 @@ CONFIG_DM9000=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 CONFIG_DAVICOM_PHY=y
 CONFIG_MICREL_PHY=y
+CONFIG_CAN_AT91=y
 CONFIG_LIBERTAS=m
 CONFIG_LIBERTAS_SDIO=m
 CONFIG_LIBERTAS_SPI=m
@@ -131,14 +135,17 @@ CONFIG_MEDIA_SUPPORT_FILTER=y
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_PLATFORM_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_ATMEL_ISI=y
+CONFIG_VIDEO_MT9V032=m
 CONFIG_VIDEO_OV2640=m
 CONFIG_VIDEO_OV7740=m
-CONFIG_VIDEO_MT9V032=m
 CONFIG_DRM=y
 CONFIG_DRM_ATMEL_HLCDC=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_FB_ATMEL=y
 CONFIG_BACKLIGHT_ATMEL_LCDC=y
 CONFIG_BACKLIGHT_PWM=y
@@ -189,7 +196,6 @@ CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_DMADEVICES=y
 CONFIG_AT_HDMAC=y
 CONFIG_AT_XDMAC=y
-CONFIG_MICROCHIP_PIT64B=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_AT91_ADC=y
@@ -200,6 +206,7 @@ CONFIG_PWM_ATMEL_HLCDC_PWM=y
 CONFIG_PWM_ATMEL_TCB=y
 CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
+CONFIG_AUTOFS_FS=m
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_UBIFS_FS=y
@@ -210,7 +217,14 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
-CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CFB=y
+CONFIG_CRYPTO_OFB=y
+CONFIG_CRYPTO_XTS=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_DEV_ATMEL_AES=y
diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig
index 46075216ee6d..bfbaa2df3be5 100644
--- a/arch/arm/configs/axm55xx_defconfig
+++ b/arch/arm/configs/axm55xx_defconfig
@@ -3,6 +3,7 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_FHANDLE=y
 CONFIG_AUDIT=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
@@ -21,12 +22,8 @@ CONFIG_SCHED_AUTOGROUP=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_AXXIA=y
-CONFIG_GPIO_PCA953X=y
 CONFIG_ARM_LPAE=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_ERRATA_430973=y
@@ -37,26 +34,24 @@ CONFIG_ARM_ERRATA_754327=y
 CONFIG_ARM_ERRATA_764369=y
 CONFIG_ARM_ERRATA_775420=y
 CONFIG_ARM_ERRATA_798181=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
 CONFIG_PCIE_AXXIA=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=16
 CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
 CONFIG_HIGHMEM=y
-CONFIG_KSM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+# CONFIG_SUSPEND is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_SUSPEND is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KSM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -76,6 +71,8 @@ CONFIG_INET_IPCOMP=y
 CONFIG_NETWORK_PHY_TIMESTAMPING=y
 CONFIG_BRIDGE=y
 # CONFIG_WIRELESS is not set
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
@@ -142,9 +139,10 @@ CONFIG_DP83640_PHY=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
-CONFIG_POWER_SUPPLY=y
+CONFIG_GPIO_PCA953X=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_AXXIA=y
+CONFIG_POWER_SUPPLY=y
 CONFIG_SENSORS_ADT7475=y
 CONFIG_SENSORS_JC42=y
 CONFIG_SENSORS_LM75=y
@@ -224,8 +222,9 @@ CONFIG_NFS_FSCACHE=y
 CONFIG_SUNRPC_DEBUG=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_CRYPTO_XCBC=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
@@ -233,6 +232,5 @@ CONFIG_RCU_CPU_STALL_TIMEOUT=60
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_XCBC=y
 CONFIG_CRYPTO_SHA256=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
deleted file mode 100644
index d9119da65f48..000000000000
--- a/arch/arm/configs/badge4_defconfig
+++ /dev/null
@@ -1,110 +0,0 @@
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_MODVERSIONS=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_BADGE4=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3"
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_IRLAN=y
-CONFIG_IRCOMM=y
-CONFIG_IRDA_ULTRA=y
-CONFIG_SA1100_FIR=y
-CONFIG_BT=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIVHCI=m
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_SA1100=y
-CONFIG_PARPORT=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_ELEKTOR=m
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SA1100_WATCHDOG=m
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=m
-CONFIG_MINIX_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 383c632eba7b..ce092abcd323 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -1,7 +1,8 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=18
@@ -19,20 +20,12 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_JUMP_LABEL=y
 CONFIG_CC_STACKPROTECTOR_REGULAR=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM2835=y
-CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
-CONFIG_KSM=y
-CONFIG_CLEANCACHE=y
-CONFIG_CMA=y
 CONFIG_SECCOMP=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
@@ -45,9 +38,15 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
 CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_SUSPEND is not set
 CONFIG_PM=y
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KSM=y
+CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -64,8 +63,7 @@ CONFIG_MAC80211=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=32
+CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_CONSTANTS=y
@@ -107,8 +105,10 @@ CONFIG_REGULATOR_GPIO=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_DRM=y
+CONFIG_DRM_V3D=y
 CONFIG_DRM_VC4=y
-CONFIG_FB_SIMPLE=y
+CONFIG_DRM_SIMPLEDRM=y
+CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -152,7 +152,6 @@ CONFIG_BCM2835_MBOX=y
 CONFIG_RASPBERRYPI_POWER=y
 CONFIG_PWM=y
 CONFIG_PWM_BCM2835=y
-CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -171,20 +170,22 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=32
 CONFIG_PRINTK_TIME=y
 CONFIG_BOOT_PRINTK_DELAY=y
 CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_LOCKUP_DETECTOR=y
-CONFIG_SCHED_TRACER=y
-CONFIG_STACK_TRACER=y
-CONFIG_FUNCTION_PROFILER=y
-CONFIG_TEST_KSTRTOX=y
 CONFIG_DEBUG_FS=y
 CONFIG_KGDB=y
 CONFIG_KGDB_KDB=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FUNCTION_PROFILER=y
+CONFIG_STACK_TRACER=y
+CONFIG_SCHED_TRACER=y
 CONFIG_STRICT_DEVMEM=y
-# CONFIG_XZ_DEC_ARM is not set
-# CONFIG_XZ_DEC_ARMTHUMB is not set
+CONFIG_TEST_KSTRTOX=y
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
deleted file mode 100644
index 3f910bbf1bfd..000000000000
--- a/arch/arm/configs/cerfcube_defconfig
+++ /dev/null
@@ -1,70 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_CERF=y
-CONFIG_SA1100_CERF_FLASH_16MB=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_SA1100=m
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySA0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw mem=32M init=/linuxrc"
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_FPE_FASTFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_WATCHDOG=y
-CONFIG_SA1100_WATCHDOG=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_SMB_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig
index 63a153f5cf68..adcee238822a 100644
--- a/arch/arm/configs/clps711x_defconfig
+++ b/arch/arm/configs/clps711x_defconfig
@@ -4,7 +4,6 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_RD_LZMA=y
 CONFIG_EMBEDDED=y
-CONFIG_SLOB=y
 CONFIG_JUMP_LABEL=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_CLPS711X=y
@@ -14,16 +13,14 @@ CONFIG_ARCH_CLEP7312=y
 CONFIG_ARCH_EDB7211=y
 CONFIG_ARCH_P720T=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 # CONFIG_COREDUMP is not set
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_IRTTY_SIR=y
 # CONFIG_WIRELESS is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
deleted file mode 100644
index 502a9d870ca4..000000000000
--- a/arch/arm/configs/cm_x300_defconfig
+++ /dev/null
@@ -1,164 +0,0 @@
-CONFIG_LOCALVERSION="-cm-x300"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_MACH_CM_X300=y
-CONFIG_NO_HZ=y
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_LIB80211=m
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_MARVELL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=0
-CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_DA9034 is not set
-CONFIG_TOUCHSCREEN_WM97XX=m
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_PMIC_DA903X=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DA903X=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_TDO24M=y
-CONFIG_BACKLIGHT_DA903X=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_6x11=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_HID_DRAGONRISE=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_TWINHAN=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_GREENASIA=y
-CONFIG_HID_SMARTJOYPLUS=y
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_THRUSTMASTER=y
-CONFIG_HID_ZEROPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=m
-CONFIG_MMC_PXA=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_V3020=y
-CONFIG_RTC_DRV_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_T10DIF=y
diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig
deleted file mode 100644
index 63fa2eb21b75..000000000000
--- a/arch/arm/configs/cns3420vb_defconfig
+++ /dev/null
@@ -1,64 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_PERF_EVENTS is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_IOSCHED_BFQ=m
-CONFIG_ARCH_MULTI_V6=y
-#CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_CNS3XXX=y
-CONFIG_MACH_CNS3420VB=y
-CONFIG_DEBUG_CNS3XXX=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=20000
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-# CONFIG_SATA_PMP is not set
-# CONFIG_ATA_SFF is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FSCACHE=y
-CONFIG_TMPFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_ARM_UNWIND is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
deleted file mode 100644
index 52bad9a544a0..000000000000
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ /dev/null
@@ -1,162 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_COLIBRI=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_VLAN_8021Q=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRTTY_SIR=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_CFG80211=y
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_DISKONCHIP=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_ONENAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_HOSTAP=y
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_SERIAL=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_PXA=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_MMC=y
-CONFIG_NEW_LEDS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_NLS_DEFAULT="iso8859-15"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig
deleted file mode 100644
index 26e5a67f8e2d..000000000000
--- a/arch/arm/configs/colibri_pxa300_defconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_COLIBRI300=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="console=ttyS0,115200 rw"
-CONFIG_CPU_IDLE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_AX88796=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_DEBUG_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_EXT3_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 36384fd575f8..69341c33e0cc 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -1,4 +1,3 @@
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
@@ -6,22 +5,24 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_EPOLL is not set
-CONFIG_SLOB=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_COLLIE=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1"
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
+# CONFIG_SWAP is not set
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
+CONFIG_PCMCIA_DEBUG=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
@@ -48,12 +49,12 @@ CONFIG_KEYBOARD_LOCOMO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_SERIO_SERPORT is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CS=y
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HWMON is not set
 CONFIG_MCP_SA11X0=y
 CONFIG_MCP_UCB1200=y
@@ -64,8 +65,6 @@ CONFIG_FB_SA1100=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LOCOMO=y
@@ -80,9 +79,11 @@ CONFIG_ROMFS_FS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_CRC_CCITT=y
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DETECT_SOFTLOCKUP is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
deleted file mode 100644
index 15b749f6996d..000000000000
--- a/arch/arm/configs/corgi_defconfig
+++ /dev/null
@@ -1,253 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_PXA_SHARPSL=y
-CONFIG_MACH_POODLE=y
-CONFIG_MACH_CORGI=y
-CONFIG_MACH_SHEPHERD=y
-CONFIG_MACH_HUSKY=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_PXA_FICP=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_SHARPSL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_ATA=y
-CONFIG_PATA_PCMCIA=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_FB=y
-CONFIG_FB_W100=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_CORGI=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB=m
-CONFIG_USB_MON=m
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=m
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index e849367c0566..821d966c95a5 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,8 +1,8 @@
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -10,34 +10,16 @@ CONFIG_CGROUPS=y
 CONFIG_CHECKPOINT_RESTORE=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V7=n
 CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DM644x=y
-CONFIG_ARCH_DAVINCI_DM355=y
-CONFIG_ARCH_DAVINCI_DM646x=y
 CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_ARCH_DAVINCI_DM365=y
-CONFIG_MACH_SFFSDR=y
-CONFIG_MACH_NEUROS_OSD2=y
-CONFIG_MACH_DM355_LEOPARD=y
-CONFIG_MACH_MITYOMAPL138=y
-CONFIG_MACH_OMAPL138_HAWKBOARD=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_CMA=y
 CONFIG_SECCOMP=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_AUTO_ZRELADDR=y
@@ -48,6 +30,13 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPUFREQ_DT=m
 CONFIG_CPU_IDLE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_SWAP is not set
+CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -65,7 +54,6 @@ CONFIG_BT_HCIUART_LL=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_FW_LOADER=m
-CONFIG_DMA_CMA=y
 CONFIG_DA8XX_MSTPRI=y
 CONFIG_MTD=m
 CONFIG_MTD_TESTS=m
@@ -95,8 +83,8 @@ CONFIG_NETCONSOLE=y
 CONFIG_TUN=m
 CONFIG_DM9000=y
 CONFIG_TI_DAVINCI_EMAC=y
-CONFIG_LSI_ET1011C_PHY=y
 CONFIG_LXT_PHY=y
+CONFIG_LSI_ET1011C_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_PPP=m
 CONFIG_PPP_DEFLATE=m
@@ -113,7 +101,6 @@ CONFIG_KEYBOARD_XTKBD=m
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PWM_BEEPER=m
-CONFIG_INPUT_DM355EVM=m
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_VT_CONSOLE is not set
 CONFIG_SERIAL_8250=y
@@ -141,7 +128,6 @@ CONFIG_SYSCON_REBOOT_MODE=m
 CONFIG_BATTERY_LEGO_EV3=m
 CONFIG_WATCHDOG=y
 CONFIG_DAVINCI_WATCHDOG=y
-CONFIG_MFD_DM355EVM_MSP=y
 CONFIG_TPS6507X=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -258,15 +244,15 @@ CONFIG_MINIX_FS=m
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_T10DIF=m
+CONFIG_DMA_CMA=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_MUTEXES=y
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_T10DIF=m
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index e70c997d5f4c..c8d559f38f48 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -1,27 +1,23 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ARCH_MULTI_V6 is not set
+CONFIG_ARCH_MULTI_V7=y
 CONFIG_ARCH_DOVE=y
 CONFIG_MACH_DOVE_DB=y
 CONFIG_MACH_CM_A510=y
 CONFIG_MACH_DOVE_DT=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MVEBU=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_VFP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -31,6 +27,9 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MVEBU=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
@@ -51,19 +50,18 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_MV643XX_ETH=y
-CONFIG_INPUT_POLLDEV=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_SERIO is not set
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
@@ -117,15 +115,11 @@ CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
 CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
@@ -133,12 +127,16 @@ CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_MARVELL_CESA=y
 CONFIG_CRC_CCITT=y
 CONFIG_LIBCRC32C=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index cd16fb6eb8e6..3154125321c5 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -5,15 +5,9 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_MULTI_V4T=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_EP93XX=y
-CONFIG_CRUNCH=y
-CONFIG_MACH_ADSSPHERE=y
 CONFIG_MACH_EDB9301=y
 CONFIG_MACH_EDB9302=y
 CONFIG_MACH_EDB9302A=y
@@ -22,19 +16,15 @@ CONFIG_MACH_EDB9307A=y
 CONFIG_MACH_EDB9312=y
 CONFIG_MACH_EDB9315=y
 CONFIG_MACH_EDB9315A=y
-CONFIG_MACH_GESBC9312=y
-CONFIG_MACH_MICRO9H=y
-CONFIG_MACH_MICRO9M=y
-CONFIG_MACH_MICRO9L=y
-CONFIG_MACH_MICRO9S=y
-CONFIG_MACH_SIM_ONE=y
-CONFIG_MACH_SNAPPER_CL15=y
 CONFIG_MACH_TS72XX=y
 CONFIG_MACH_VISION_EP9307=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -51,8 +41,8 @@ CONFIG_IPV6=y
 # CONFIG_IPV6_SIT is not set
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -67,6 +57,7 @@ CONFIG_EEPROM_LEGACY=y
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_NETDEVICES=y
 CONFIG_EP93XX_ETH=y
 CONFIG_USB_RTL8150=y
@@ -123,6 +114,7 @@ CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_LIBCRC32C=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_SLAB=y
 CONFIG_DEBUG_SPINLOCK=y
@@ -130,4 +122,3 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
deleted file mode 100644
index 046f4dc2e18e..000000000000
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ /dev/null
@@ -1,105 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_PXA_ESERIES=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_IWMMXT=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_PXA_FICP=y
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-# CONFIG_STANDALONE is not set
-CONFIG_MTD=m
-CONFIG_MTD_RAW_NAND=m
-CONFIG_MTD_NAND_TMIO=m
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=m
-# CONFIG_SATA_PMP is not set
-CONFIG_PATA_PCMCIA=m
-CONFIG_NETDEVICES=y
-CONFIG_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_NET_PCMCIA=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_WM97XX=m
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_MFD_T7L66XB=y
-CONFIG_MFD_TC6387XB=y
-CONFIG_MFD_TC6393XB=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_W100=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_PCMCIA is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_E800=m
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_TMIO=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 513f56b3c059..b0f0baa3a6c4 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_CGROUPS=y
@@ -13,12 +13,9 @@ CONFIG_BIG_LITTLE=y
 CONFIG_NR_CPUS=8
 CONFIG_HIGHMEM=y
 CONFIG_SECCOMP=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
-CONFIG_ENERGY_MODEL=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@@ -34,12 +31,7 @@ CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_ADVANCED_DEBUG=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA256_ARM=m
-CONFIG_CRYPTO_SHA512_ARM=m
-CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
+CONFIG_ENERGY_MODEL=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -158,6 +150,7 @@ CONFIG_CHARGER_MAX14577=y
 CONFIG_CHARGER_MAX77693=y
 CONFIG_CHARGER_MAX8997=y
 CONFIG_CHARGER_MAX8998=y
+CONFIG_CHARGER_SMB347=y
 CONFIG_CHARGER_TPS65090=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_NTC_THERMISTOR=y
@@ -169,8 +162,6 @@ CONFIG_THERMAL_EMULATION=y
 CONFIG_WATCHDOG=y
 CONFIG_S3C2410_WATCHDOG=y
 CONFIG_MFD_CROS_EC_DEV=y
-CONFIG_CHROME_PLATFORMS=y
-CONFIG_CROS_EC=y
 CONFIG_MFD_MAX14577=y
 CONFIG_MFD_MAX77686=y
 CONFIG_MFD_MAX77693=y
@@ -206,19 +197,19 @@ CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
 CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
 CONFIG_VIDEO_S5P_FIMC=m
 CONFIG_VIDEO_S5P_MIPI_CSIS=m
 CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
 CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
 CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
-CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
 CONFIG_V4L_TEST_DRIVERS=y
 CONFIG_VIDEO_VIVID=m
-CONFIG_VIDEO_S5K6A3=m
 CONFIG_VIDEO_S5C73M3=m
+CONFIG_VIDEO_S5K6A3=m
 CONFIG_DRM=y
 CONFIG_DRM_EXYNOS=y
 CONFIG_DRM_EXYNOS_FIMD=y
@@ -227,6 +218,7 @@ CONFIG_DRM_EXYNOS_DPI=y
 CONFIG_DRM_EXYNOS_DSI=y
 CONFIG_DRM_EXYNOS_HDMI=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
 CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=y
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
@@ -236,6 +228,7 @@ CONFIG_DRM_SII9234=y
 CONFIG_DRM_TOSHIBA_TC358764=y
 CONFIG_DRM_LIMA=y
 CONFIG_DRM_PANFROST=y
+CONFIG_FB=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_PWM=y
@@ -292,11 +285,11 @@ CONFIG_MMC_DW_EXYNOS=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_CLASS_FLASH=y
-CONFIG_LEDS_AAT1290=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
-CONFIG_LEDS_MAX77693=y
 CONFIG_LEDS_MAX8997=y
+CONFIG_LEDS_AAT1290=y
+CONFIG_LEDS_MAX77693=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX8998=y
@@ -306,6 +299,8 @@ CONFIG_RTC_DRV_S5M=y
 CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
 CONFIG_PL330_DMA=y
+CONFIG_CHROME_PLATFORMS=y
+CONFIG_CROS_EC=y
 CONFIG_CROS_EC_I2C=y
 CONFIG_CROS_EC_SPI=y
 CONFIG_COMMON_CLK_MAX77686=y
@@ -316,12 +311,12 @@ CONFIG_DEVFREQ_GOV_PERFORMANCE=y
 CONFIG_DEVFREQ_GOV_POWERSAVE=y
 CONFIG_DEVFREQ_GOV_USERSPACE=y
 CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y
-CONFIG_EXYNOS5422_DMC=y
 CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
 CONFIG_EXTCON=y
 CONFIG_EXTCON_MAX14577=y
 CONFIG_EXTCON_MAX77693=y
 CONFIG_EXTCON_MAX8997=y
+CONFIG_EXYNOS5422_DMC=y
 CONFIG_IIO=y
 CONFIG_EXYNOS_ADC=y
 CONFIG_STMPE_ADC=y
@@ -364,6 +359,11 @@ CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
+CONFIG_CRYPTO_SHA1_ARM_NEON=m
+CONFIG_CRYPTO_SHA256_ARM=m
+CONFIG_CRYPTO_SHA512_ARM=m
+CONFIG_CRYPTO_AES_ARM_BS=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_CRYPTO_DEV_EXYNOS_RNG=y
 CONFIG_CRYPTO_DEV_S5P=y
 CONFIG_CRC_CCITT=y
@@ -373,10 +373,10 @@ CONFIG_FONTS=y
 CONFIG_FONT_7x14=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DETECT_HUNG_TASK is not set
 CONFIG_PROVE_LOCKING=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
deleted file mode 100644
index 81665b7abf83..000000000000
--- a/arch/arm/configs/ezx_defconfig
+++ /dev/null
@@ -1,393 +0,0 @@
-CONFIG_LOCALVERSION="-ezx200910312315"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_EXPERT=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_PXA_EZX=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
-CONFIG_KEXEC=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_IDLE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_SCTP=y
-CONFIG_NF_CT_PROTO_UDPLITE=y
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE=m
-CONFIG_BT=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-# CONFIG_WIRELESS is not set
-CONFIG_FW_LOADER=m
-CONFIG_CONNECTOR=m
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_OTP=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_WLAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_PCAP=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_INPUT_PCAP=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=8
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_EZX_PCAP=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-CONFIG_REGULATOR_PCAP=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_MEDIA_TUNER_CUSTOMISE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_PXA27x=y
-# CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_TEA5764=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_OVERLAY=y
-CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_PXA2XX_SOC=y
-# CONFIG_USB_HID is not set
-CONFIG_HID_APPLE=m
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_PXA27X=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_PXA=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_LP3944=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCAP=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_XFS_FS=m
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_ROMFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_PROVE_LOCKING=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig
index 3a7938f244e5..87c489337d0e 100644
--- a/arch/arm/configs/footbridge_defconfig
+++ b/arch/arm/configs/footbridge_defconfig
@@ -4,19 +4,17 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_HOTPLUG is not set
-CONFIG_MODULES=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_FOOTBRIDGE=y
-CONFIG_ARCH_CATS=y
-CONFIG_ARCH_PERSONAL_SERVER=y
 CONFIG_ARCH_EBSA285_HOST=y
 CONFIG_ARCH_NETWINDER=y
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-CONFIG_BINFMT_AOUT=y
+CONFIG_MODULES=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ACORN_PARTITION=y
+CONFIG_ACORN_PARTITION_ADFS=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -27,15 +25,6 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_SYN_COOKIES=y
 # CONFIG_IPV6 is not set
 CONFIG_ATM=y
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-CONFIG_WINBOND_FIR=m
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
 CONFIG_PARPORT_PC_FIFO=y
@@ -65,7 +54,6 @@ CONFIG_PARIDE_ON26=m
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_IDE=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_NET_VENDOR_3COM=y
@@ -73,17 +61,17 @@ CONFIG_VORTEX=y
 CONFIG_NET_PCI=y
 CONFIG_NE2K_PCI=y
 CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_SERIAL_21285=y
 CONFIG_SERIAL_21285_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_PRINTER=m
 CONFIG_DS1620=y
 CONFIG_NWBUTTON=y
@@ -101,6 +89,10 @@ CONFIG_SOUND=m
 CONFIG_USB=m
 CONFIG_USB_MON=m
 CONFIG_USB_PRINTER=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_EXT2_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_ISO9660_FS=m
@@ -111,9 +103,6 @@ CONFIG_ADFS_FS=m
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
-CONFIG_ACORN_PARTITION_ADFS=y
 CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig
index d2d5f1cf815f..592a6e6024d4 100644
--- a/arch/arm/configs/gemini_defconfig
+++ b/arch/arm/configs/gemini_defconfig
@@ -49,11 +49,13 @@ CONFIG_ATA=y
 CONFIG_PATA_FTIDE010=y
 CONFIG_NETDEVICES=y
 CONFIG_TUN=y
+CONFIG_NET_DSA_REALTEK=y
 CONFIG_NET_DSA_REALTEK_SMI=y
+CONFIG_NET_DSA_REALTEK_RTL8366RB=y
 CONFIG_GEMINI_ETHERNET=y
+CONFIG_MARVELL_PHY=y
 CONFIG_MDIO_BITBANG=y
 CONFIG_MDIO_GPIO=y
-CONFIG_MARVELL_PHY=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -63,10 +65,10 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
 CONFIG_SERIAL_8250_RUNTIME_UARTS=1
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HW_RANDOM is not set
 CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=y
+CONFIG_SENSORS_DRIVETEMP=y
 CONFIG_SENSORS_GPIO_FAN=y
 CONFIG_SENSORS_LM75=y
 CONFIG_THERMAL=y
@@ -76,13 +78,14 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_ILITEK_IL9322=y
 CONFIG_DRM_TVE200=y
+CONFIG_FB=y
 CONFIG_LOGO=y
 CONFIG_USB=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_FOTG210_HCD=y
 CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_FOTG210_HCD=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
@@ -98,5 +101,5 @@ CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_ROMFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_CRYPTO_DEV_SL3516=y
 CONFIG_DEBUG_FS=y
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index c02b3e409610..4e272875c797 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -1,28 +1,23 @@
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_H3600=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 # CONFIG_CPU_FREQ_STAT is not set
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
 CONFIG_MTD=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -36,6 +31,7 @@ CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig
deleted file mode 100644
index f5a338fefda8..000000000000
--- a/arch/arm/configs/h5000_defconfig
+++ /dev/null
@@ -1,74 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_UID16 is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_H5000=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SA1100=y
-CONFIG_EXT2_FS=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
deleted file mode 100644
index 742d18cdabde..000000000000
--- a/arch/arm/configs/hackkit_defconfig
+++ /dev/null
@@ -1,46 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_HACKKIT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell"
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=3
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig
index 74d611e41e02..0376a65e8bc1 100644
--- a/arch/arm/configs/hisi_defconfig
+++ b/arch/arm/configs/hisi_defconfig
@@ -1,24 +1,25 @@
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_RD_LZMA=y
 CONFIG_ARCH_HISI=y
 CONFIG_ARCH_HI3xxx=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_CMDLINE_PARTITION=y
-CONFIG_ARCH_HIX5HD2=y
 CONFIG_ARCH_HIP01=y
 CONFIG_ARCH_HIP04=y
+CONFIG_ARCH_HIX5HD2=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=16
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
 CONFIG_PM=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_PARTITION=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -39,20 +40,20 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_PINCTRL_SINGLE=y
-CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIOLIB=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_MFD_SYSCON=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_DRM=y
 CONFIG_FB_SIMPLE=y
@@ -66,13 +67,13 @@ CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_PLTFM=y
+CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PL031=y
 CONFIG_DMADEVICES=y
-CONFIG_DW_DMAC=y
 CONFIG_PL330_DMA=y
+CONFIG_DW_DMAC=y
 CONFIG_PWM=y
 CONFIG_PHY_HIX5HD2_SATA=y
 CONFIG_EXT4_FS=y
@@ -81,11 +82,10 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOCKUP_DETECTOR=y
-CONFIG_VFP=y
 CONFIG_VFPv3=y
+CONFIG_DEBUG_FS=y
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
deleted file mode 100644
index ae15a2a33802..000000000000
--- a/arch/arm/configs/imote2_defconfig
+++ /dev/null
@@ -1,368 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_EXPERT=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_INTELMOTE2=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_SCTP=y
-CONFIG_NF_CT_PROTO_UDPLITE=y
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE=m
-# CONFIG_BRIDGE_IGMP_SNOOPING is not set
-CONFIG_IEEE802154=y
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_FW_LOADER=m
-CONFIG_CONNECTOR=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_AFS_PARTS=y
-CONFIG_MTD_AR7_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_OTP=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_WLAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=8
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_PMIC_DA903X=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-CONFIG_REGULATOR_DA903X=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_MEDIA_TUNER_CUSTOMISE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_PXA27x=y
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_OVERLAY=y
-CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_PXA2XX_SOC=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_PXA27X=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_PXA=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_LP3944=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_ROMFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_PROVE_LOCKING=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC16=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 1d9fa77bbafc..c9a602aee715 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -1,15 +1,12 @@
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
 CONFIG_PROFILING=y
 CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
@@ -24,13 +21,13 @@ CONFIG_SOC_IMX1=y
 CONFIG_SOC_IMX25=y
 CONFIG_SOC_IMX27=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_PM_DEBUG=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -63,6 +60,7 @@ CONFIG_MTD_UBI=y
 CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 CONFIG_PATA_IMX=y
 CONFIG_NETDEVICES=y
@@ -162,7 +160,7 @@ CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_DMADEVICES=y
 CONFIG_IMX_DMA=y
-CONFIG_IMX_SDMA=y
+CONFIG_IMX_SDMA=m
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_FSL_MX25_ADC=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 70928cc48939..4de293da4789 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -1,18 +1,18 @@
 CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_CGROUPS=y
+CONFIG_CGROUP_BPF=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_IMX31=y
@@ -28,13 +28,10 @@ CONFIG_SOC_IMX6UL=y
 CONFIG_SOC_IMX7D=y
 CONFIG_SOC_IMX7ULP=y
 CONFIG_SOC_VF610=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_IMX6=y
 CONFIG_SMP=y
 CONFIG_ARM_PSCI=y
 CONFIG_HIGHMEM=y
-CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_ARCH_FORCE_MAX_ORDER=13
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
@@ -53,24 +50,21 @@ CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_TEST_SUSPEND=y
+CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_BINFMT_MISC=m
+# CONFIG_COMPAT_BRK is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 CONFIG_NETFILTER=y
 CONFIG_CAN=y
-CONFIG_CAN_FLEXCAN=y
 CONFIG_BT=y
 CONFIG_BT_BNEP=m
 CONFIG_BT_HCIUART=y
@@ -80,12 +74,14 @@ CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=y
 CONFIG_RFKILL=y
 CONFIG_RFKILL_INPUT=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_IMX6_HOST=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 CONFIG_FW_LOADER_USER_HELPER=y
 CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
-CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_IMX_WEIM=y
 CONFIG_CONNECTOR=y
 CONFIG_MTD=y
@@ -96,16 +92,15 @@ CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_M25P80=y
 CONFIG_MTD_SST25L=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_GPMI_NAND=y
 CONFIG_MTD_NAND_VF610_NFC=y
 CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_SPI_FSL_QUADSPI=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_MTD_UBI_BLOCK=y
@@ -116,17 +111,16 @@ CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
-# CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
 CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_AHCI_IMX=y
 CONFIG_PATA_IMX=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
-CONFIG_CS89x0=y
 CONFIG_CS89x0_PLATFORM=y
 # CONFIG_NET_VENDOR_FARADAY is not set
 # CONFIG_NET_VENDOR_INTEL is not set
@@ -134,14 +128,15 @@ CONFIG_CS89x0_PLATFORM=y
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_MICROCHIP is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_QCA7000_SPI=m
 # CONFIG_NET_VENDOR_SEEQ is not set
 CONFIG_SMC91X=y
 CONFIG_SMC911X=y
 CONFIG_SMSC911X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_AT803X_PHY=y
 CONFIG_MICREL_PHY=y
-CONFIG_SMSC_PHY=y
+CONFIG_AT803X_PHY=y
+CONFIG_CAN_FLEXCAN=y
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_RTL8152=y
@@ -150,6 +145,8 @@ CONFIG_USB_USBNET=y
 CONFIG_USB_NET_CDC_EEM=m
 CONFIG_USB_NET_SMSC95XX=y
 CONFIG_USB_NET_MCS7830=y
+CONFIG_ATH10K=m
+CONFIG_ATH10K_SDIO=m
 CONFIG_BRCMFMAC=m
 CONFIG_MWIFIEX=m
 CONFIG_MWIFIEX_SDIO=m
@@ -170,6 +167,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 CONFIG_TOUCHSCREEN_AD7879=y
 CONFIG_TOUCHSCREEN_AD7879_I2C=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_CYTTSP5=y
 CONFIG_TOUCHSCREEN_DA9052=y
 CONFIG_TOUCHSCREEN_EGALAX=y
 CONFIG_TOUCHSCREEN_GOODIX=y
@@ -202,6 +200,7 @@ CONFIG_I2C_ALGOPCA=m
 CONFIG_I2C_GPIO=y
 CONFIG_I2C_IMX=y
 CONFIG_SPI=y
+CONFIG_SPI_FSL_QUADSPI=y
 CONFIG_SPI_GPIO=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_FSL_DSPI=y
@@ -210,14 +209,17 @@ CONFIG_PINCTRL_IMX8MN=y
 CONFIG_PINCTRL_IMX8MP=y
 CONFIG_PINCTRL_IMX8MQ=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MXC=y
 CONFIG_GPIO_SIOX=m
 CONFIG_GPIO_MAX732X=y
-CONFIG_GPIO_MC9S08DZ60=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_BD71815=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_74X164=y
-CONFIG_GPIO_MXC=y
+CONFIG_W1=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_SLAVE_THERM=m
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
@@ -226,13 +228,15 @@ CONFIG_RN5T618_POWER=m
 CONFIG_SENSORS_MC13783_ADC=y
 CONFIG_SENSORS_GPIO_FAN=y
 CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_PWM_FAN=y
+CONFIG_SENSORS_SY7636A=y
 CONFIG_THERMAL_STATISTICS=y
 CONFIG_THERMAL_WRITABLE_TRIPS=y
 CONFIG_CPU_THERMAL=y
 CONFIG_IMX_THERMAL=y
 CONFIG_WATCHDOG=y
-CONFIG_DA9062_WATCHDOG=y
 CONFIG_DA9063_WATCHDOG=m
+CONFIG_DA9062_WATCHDOG=y
 CONFIG_RN5T618_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_IMX7ULP_WDT=y
@@ -241,43 +245,45 @@ CONFIG_MFD_DA9062=y
 CONFIG_MFD_DA9063=y
 CONFIG_MFD_MC13XXX_SPI=y
 CONFIG_MFD_MC13XXX_I2C=y
+CONFIG_MFD_SY7636A=y
 CONFIG_MFD_RN5T618=y
 CONFIG_MFD_STMPE=y
-CONFIG_REGULATOR=y
+CONFIG_MFD_ROHM_BD71828=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ANATOP=y
+CONFIG_REGULATOR_BD71815=y
 CONFIG_REGULATOR_DA9052=y
 CONFIG_REGULATOR_DA9062=y
 CONFIG_REGULATOR_DA9063=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_LTC3676=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_REGULATOR_PFUZE100=y
 CONFIG_REGULATOR_RN5T618=y
+CONFIG_REGULATOR_SY7636A=y
 CONFIG_RC_CORE=y
 CONFIG_RC_DEVICES=y
 CONFIG_IR_GPIO_CIR=y
 CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_MUX=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MUX=y
 CONFIG_VIDEO_CODA=m
 CONFIG_VIDEO_IMX_PXP=y
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-CONFIG_VIDEO_ADV7180=m
 CONFIG_VIDEO_OV2680=m
 CONFIG_VIDEO_OV5640=m
 CONFIG_VIDEO_OV5645=m
+CONFIG_VIDEO_ADV7180=m
 CONFIG_IMX_IPUV3_CORE=y
 CONFIG_DRM=y
+CONFIG_DRM_I2C_NXP_TDA998X=y
 CONFIG_DRM_MSM=y
 CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
 CONFIG_DRM_TI_TFP410=y
 CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
@@ -289,6 +295,7 @@ CONFIG_DRM_IMX_LDB=y
 CONFIG_DRM_IMX_HDMI=y
 CONFIG_DRM_ETNAVIV=y
 CONFIG_DRM_MXSFB=y
+CONFIG_FB=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
@@ -303,24 +310,23 @@ CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=y
 CONFIG_SND_SOC_FSL_ASRC=y
 CONFIG_SND_IMX_SOC=y
-CONFIG_SND_SOC_PHYCORE_AC97=y
 CONFIG_SND_SOC_EUKREA_TLV320=y
 CONFIG_SND_SOC_IMX_ES8328=y
 CONFIG_SND_SOC_IMX_SGTL5000=y
 CONFIG_SND_SOC_IMX_SPDIF=y
-CONFIG_SND_SOC_IMX_MC13783=y
 CONFIG_SND_SOC_FSL_ASOC_CARD=y
 CONFIG_SND_SOC_AC97_CODEC=y
 CONFIG_SND_SOC_CS42XX8_I2C=y
-CONFIG_SND_SOC_TLV320AIC3X=y
+CONFIG_SND_SOC_TLV320AIC3X_I2C=y
 CONFIG_SND_SOC_WM8960=y
 CONFIG_SND_SOC_WM8962=y
 CONFIG_SND_SIMPLE_CARD=y
 CONFIG_HID_MULTITOUCH=y
+CONFIG_HID_WACOM=y
+CONFIG_I2C_HID_OF=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
 CONFIG_USB_ACM=m
 CONFIG_USB_STORAGE=y
 CONFIG_USB_CHIPIDEA=y
@@ -335,7 +341,6 @@ CONFIG_USB_EHSET_TEST_FIXTURE=m
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_FSL_USB2=y
 CONFIG_USB_CONFIGFS=y
 CONFIG_USB_CONFIGFS_SERIAL=y
 CONFIG_USB_CONFIGFS_ACM=y
@@ -384,30 +389,36 @@ CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_PCF8523=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_M41T80=y
+CONFIG_RTC_DRV_BD70528=y
+CONFIG_RTC_DRV_RC5T619=y
+CONFIG_RTC_DRV_RV3029C2=y
 CONFIG_RTC_DRV_DA9063=y
 CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_RTC_DRV_MXC_V2=y
-CONFIG_RTC_DRV_RC5T619=y
 CONFIG_RTC_DRV_SNVS=y
 CONFIG_DMADEVICES=y
 CONFIG_FSL_EDMA=y
-CONFIG_IMX_SDMA=y
+CONFIG_IMX_SDMA=m
 CONFIG_MXS_DMA=y
 CONFIG_DMATEST=m
 CONFIG_STAGING=y
 CONFIG_STAGING_MEDIA=y
 CONFIG_VIDEO_IMX_MEDIA=y
 CONFIG_COMMON_CLK_PWM=y
+CONFIG_COMMON_CLK_BD718XX=y
 CONFIG_CLK_IMX8MM=y
 CONFIG_CLK_IMX8MN=y
 CONFIG_CLK_IMX8MP=y
 CONFIG_CLK_IMX8MQ=y
 CONFIG_SOC_IMX8M=y
+CONFIG_EXTCON_USB_GPIO=y
 CONFIG_IIO=y
+CONFIG_IIO_ST_ACCEL_3AXIS=m
 CONFIG_MMA8452=y
 CONFIG_IMX7D_ADC=y
 CONFIG_RN5T618_ADC=y
+CONFIG_STMPE_ADC=y
 CONFIG_VF610_ADC=y
 CONFIG_SENSORS_ISL29018=y
 CONFIG_MAG3110=y
@@ -417,8 +428,8 @@ CONFIG_PWM_FSL_FTM=y
 CONFIG_PWM_IMX27=y
 CONFIG_PWM_IMX_TPM=y
 CONFIG_NVMEM_IMX_OCOTP=y
-CONFIG_NVMEM_VF610_OCOTP=y
 CONFIG_NVMEM_SNVS_LPGPR=y
+CONFIG_NVMEM_VF610_OCOTP=y
 CONFIG_TEE=y
 CONFIG_OPTEE=y
 CONFIG_MUX_MMIO=y
@@ -465,13 +476,14 @@ CONFIG_CRC_CCITT=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC7=m
 CONFIG_LIBCRC32C=m
+CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_PRINTK_TIME=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
+# CONFIG_SLUB_DEBUG is not set
 # CONFIG_SCHED_DEBUG is not set
-CONFIG_PROVE_LOCKING=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/imxrt_defconfig b/arch/arm/configs/imxrt_defconfig
new file mode 100644
index 000000000000..52dba3762996
--- /dev/null
+++ b/arch/arm/configs/imxrt_defconfig
@@ -0,0 +1,35 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_BPF_SYSCALL=y
+CONFIG_SCHED_AUTOGROUP=y
+# CONFIG_MMU is not set
+CONFIG_ARCH_MXC=y
+CONFIG_SOC_IMXRT=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x80000000
+CONFIG_DRAM_SIZE=0x02000000
+CONFIG_BINFMT_FLAT=y
+CONFIG_UEVENT_HELPER=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_IMX_WEIM=y
+CONFIG_LEGACY_PTY_COUNT=2
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_PINCTRL_IMXRT1050=y
+CONFIG_GPIO_MXC=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_DMADEVICES=y
+CONFIG_FSL_EDMA=y
+CONFIG_CLK_IMXRT1050=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_UTF8=y
+CONFIG_EXFAT_FS=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_UTF8=y
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index b06e537d5149..61711d4bbf74 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
@@ -57,10 +57,7 @@ CONFIG_DRM=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_PL111=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_LOGO=y
@@ -82,8 +79,7 @@ CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
deleted file mode 100644
index 18a21faa834c..000000000000
--- a/arch/arm/configs/iop32x_defconfig
+++ /dev/null
@@ -1,129 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_IOP32X=y
-CONFIG_MACH_GLANTANK=y
-CONFIG_ARCH_IQ80321=y
-CONFIG_ARCH_IQ31244=y
-CONFIG_MACH_N2100=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_SATA_VITESSE=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_E100=y
-CONFIG_E1000=y
-CONFIG_R8169=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IOP3XX=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_DMADEVICES=y
-CONFIG_INTEL_IOP_ADMA=y
-CONFIG_NET_DMA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_TMPFS=y
-CONFIG_ECRYPT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
-CONFIG_KEYS=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index 0d6edeb27659..3cb995b9616a 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -1,36 +1,21 @@
+CONFIG_KERNEL_XZ=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_COMPRESSION_XZ=y
 CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_IXP4XX=y
-CONFIG_MACH_NSLU2=y
-CONFIG_MACH_AVILA=y
-CONFIG_MACH_LOFT=y
-CONFIG_ARCH_ADI_COYOTE=y
-CONFIG_MACH_GATEWAY7001=y
-CONFIG_MACH_WG302V2=y
-CONFIG_ARCH_IXDP425=y
-CONFIG_MACH_IXDPG425=y
-CONFIG_MACH_IXDP465=y
-CONFIG_MACH_KIXRP435=y
-CONFIG_ARCH_PRPMC1100=y
-CONFIG_MACH_NAS100D=y
-CONFIG_MACH_DSMG600=y
-CONFIG_MACH_FSG=y
-CONFIG_MACH_GTWX5715=y
-CONFIG_IXP4XX_QMGR=y
-CONFIG_IXP4XX_NPE=y
-# CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs"
-CONFIG_FPE_NWFPE=y
+CONFIG_CMDLINE="console=ttyS0,115200"
+CONFIG_STRICT_KERNEL_RWX=y
+CONFIG_STRICT_MODULE_RWX=y
+CONFIG_MODULES=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -43,8 +28,6 @@ CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
@@ -65,7 +48,6 @@ CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -76,14 +58,12 @@ CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-CONFIG_IPX=m
 CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
 CONFIG_X25=m
 CONFIG_LAPB=m
-CONFIG_WAN_ROUTER=m
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
@@ -104,88 +84,92 @@ CONFIG_NET_CLS_RSVP6=m
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_PKTGEN=m
+CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_IXP4XX=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PHYSMAP_IXP4XX=y
 CONFIG_MTD_RAW_NAND=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_EEPROM_LEGACY=y
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
-CONFIG_SATA_VIA=y
-CONFIG_PATA_ARTOP=y
-CONFIG_PATA_CMD64X=y
-CONFIG_PATA_HPT366=y
-CONFIG_PATA_HPT37X=y
-CONFIG_PATA_HPT3X2N=y
-CONFIG_PATA_PDC2027X=y
 CONFIG_PATA_IXP4XX_CF=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+CONFIG_ATM_TCP=m
 CONFIG_IXP4XX_ETH=y
-CONFIG_NET_PCI=y
 CONFIG_WAN=y
-CONFIG_HDLC=m
+CONFIG_HDLC=y
 CONFIG_HDLC_RAW=m
 CONFIG_HDLC_CISCO=m
 CONFIG_HDLC_FR=m
 CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_ATM_TCP=m
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_IXP4XX_HSS=m
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_MISC=y
-CONFIG_INPUT_IXP4XX_BEEPER=y
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_I2C=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+CONFIG_GPIO_GW_PLD=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_SENSORS_AD7418=y
 CONFIG_SENSORS_W83781D=y
 CONFIG_WATCHDOG=y
 CONFIG_IXP4XX_WATCHDOG=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_FSG=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1672=y
 CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_X1205=y
 CONFIG_RTC_DRV_PCF8563=y
+CONFIG_IXP4XX_QMGR=y
+CONFIG_IXP4XX_NPE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_OVERLAY_FS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_JFFS2_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XZ=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
+CONFIG_CRYPTO_DEV_IXP4XX=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_LL_UART_8250=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index 069f60ffdcd8..91bdcc095884 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -1,18 +1,14 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_JORNADA720=y
 CONFIG_SA1100_JORNADA720_SSP=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
 CONFIG_PM=y
+CONFIG_MODULES=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -20,13 +16,12 @@ CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_SA1100_FIR=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
@@ -40,9 +35,9 @@ CONFIG_KEYBOARD_HP7XX=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_HP7XX=y
+CONFIG_LEGACY_PTY_COUNT=32
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_S1D13XXX=y
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 33c917df7b32..d7a0bca641eb 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -1,43 +1,41 @@
-# CONFIG_SWAP is not set
 CONFIG_POSIX_MQUEUE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_SCHED=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set
+CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
 CONFIG_ARCH_KEYSTONE=y
 CONFIG_ARM_LPAE=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
 CONFIG_PCI_KEYSTONE=y
 CONFIG_SMP=y
 CONFIG_HOTPLUG_CPU=y
 CONFIG_ARM_PSCI=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_CMA=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 # CONFIG_SUSPEND is not set
 CONFIG_PM=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_SWAP is not set
+CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -111,11 +109,11 @@ CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP_SCTP=y
 CONFIG_VLAN_8021Q=y
 CONFIG_CAN=m
-CONFIG_CAN_C_CAN=m
-CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMA_CMA=y
+CONFIG_TI_SCI_PROTOCOL=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -131,10 +129,17 @@ CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
+CONFIG_TI_CPTS=y
 CONFIG_TI_KEYSTONE_NETCP=y
 CONFIG_TI_KEYSTONE_NETCP_ETHSS=y
-CONFIG_TI_CPTS=y
 CONFIG_MARVELL_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_DP83867_PHY=y
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_GPIO_DECODER=m
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
@@ -144,17 +149,18 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DAVINCI=y
 CONFIG_SPI=y
+CONFIG_SPI_CADENCE_QUADSPI=y
 CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_SPIDEV=y
-CONFIG_PTP_1588_CLOCK=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_SYSCON=y
-CONFIG_POWER_SUPPLY=y
+CONFIG_GPIO_PCA953X=m
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_KEYSTONE=y
+CONFIG_POWER_SUPPLY=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_DAVINCI_WATCHDOG=y
@@ -166,8 +172,8 @@ CONFIG_USB_MON=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC3=y
-CONFIG_NOP_USB_XCEIV=y
 CONFIG_KEYSTONE_USB_PHY=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
@@ -180,6 +186,8 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_ACTIVITY=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_DMADEVICES=y
 CONFIG_TI_EDMA=y
@@ -196,7 +204,6 @@ CONFIG_PWM_TIECAP=m
 CONFIG_KEYSTONE_IRQ=y
 CONFIG_RESET_TI_SCI=m
 CONFIG_RESET_TI_SYSCON=m
-CONFIG_TI_SCI_PROTOCOL=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_FANOTIFY=y
@@ -213,29 +220,20 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_USER=y
 CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CTR=y
 CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_CRYPTO_USER_API_HASH=y
 CONFIG_CRYPTO_USER_API_SKCIPHER=y
-CONFIG_SPI_CADENCE_QUADSPI=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_GPIO_DECODER=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_LEDS_TRIGGER_ACTIVITY=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_MICREL_PHY=y
-CONFIG_DP83867_PHY=y
+CONFIG_DMA_CMA=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
deleted file mode 100644
index b6ddb9884326..000000000000
--- a/arch/arm/configs/lart_defconfig
+++ /dev/null
@@ -1,70 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_LART=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram"
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_DEBUG=y
-CONFIG_SA1100_FIR=m
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_LART=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_USER=y
-CONFIG_CRC32=m
diff --git a/arch/arm/configs/lpae.config b/arch/arm/configs/lpae.config
new file mode 100644
index 000000000000..a6d6f7ab3c01
--- /dev/null
+++ b/arch/arm/configs/lpae.config
@@ -0,0 +1,2 @@
+CONFIG_ARM_LPAE=y
+CONFIG_VMSPLIT_2G=y
diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig
index be882ea0eee4..56eae6a0a311 100644
--- a/arch/arm/configs/lpc18xx_defconfig
+++ b/arch/arm/configs/lpc18xx_defconfig
@@ -15,8 +15,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
 # CONFIG_MMU is not set
 CONFIG_ARCH_LPC18XX=y
 CONFIG_SET_MEM_PARAM=y
@@ -24,14 +22,11 @@ CONFIG_DRAM_BASE=0x28000000
 CONFIG_DRAM_SIZE=0x02000000
 CONFIG_FLASH_MEM_BASE=0x1b000000
 CONFIG_FLASH_SIZE=0x00080000
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
 # CONFIG_COREDUMP is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -61,6 +56,7 @@ CONFIG_SRAM=y
 CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_ARC is not set
@@ -93,11 +89,11 @@ CONFIG_KEYBOARD_GPIO_POLLED=y
 # CONFIG_VT is not set
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_SERIAL_8250=y
 # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C_LPC2K=y
 CONFIG_SPI=y
@@ -154,11 +150,12 @@ CONFIG_JFFS2_FS=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC7=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SLUB_DEBUG is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index 989bcc84e7fb..fabb66a53350 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
@@ -10,12 +10,9 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_LPC32XX=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0"
@@ -24,9 +21,9 @@ CONFIG_VFP=y
 CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -60,6 +57,7 @@ CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_AT25=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CIRRUS is not set
@@ -93,11 +91,11 @@ CONFIG_SERIAL_HS_LPC32XX_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_PNX=y
-CONFIG_GPIO_LPC32XX=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_LPC32XX=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_SENSORS_DS620=y
@@ -108,6 +106,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_PL111=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
@@ -186,10 +185,10 @@ CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_GDB_SCRIPTS=y
-CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_PANIC_ON_OOPS=y
 CONFIG_PANIC_TIMEOUT=5
 # CONFIG_SCHED_DEBUG is not set
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
deleted file mode 100644
index 3a4d0e64cd6e..000000000000
--- a/arch/arm/configs/lpd270_defconfig
+++ /dev/null
@@ -1,59 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_LOGICPD_PXA270=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_PXA2XX_AC97=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig
deleted file mode 100644
index 4ce2da2e76fa..000000000000
--- a/arch/arm/configs/lubbock_defconfig
+++ /dev/null
@@ -1,52 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_LUBBOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_SA1111=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_G_SERIAL=m
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
deleted file mode 100644
index b4670d42f378..000000000000
--- a/arch/arm/configs/magician_defconfig
+++ /dev/null
@@ -1,161 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_UID16 is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_H4700=y
-CONFIG_MACH_MAGICIAN=y
-CONFIG_NO_HZ=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="keepinitrd"
-CONFIG_KEXEC=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-CONFIG_IRTTY_SIR=m
-CONFIG_PXA_FICP=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NETDEVICES=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_PXA=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_PXA=y
-CONFIG_W1_MASTER_DS1WM=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PDA_POWER=y
-CONFIG_BATTERY_DS2760=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_ASIC3=y
-CONFIG_HTC_EGPIO=y
-CONFIG_HTC_PASIC3=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_OVERLAY=y
-CONFIG_FB_W100=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_USB=y
-CONFIG_USB_MON=m
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_PXA27X=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_GPIO_VBUS=y
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DEBUG=y
-CONFIG_RTC_DRV_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig
deleted file mode 100644
index 26499b697f9f..000000000000
--- a/arch/arm/configs/mainstone_defconfig
+++ /dev/null
@@ -1,50 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_MAINSTONE=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig
index 7c07f9893a0f..385ad0f391a8 100644
--- a/arch/arm/configs/milbeaut_m10v_defconfig
+++ b/arch/arm/configs/milbeaut_m10v_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
@@ -26,7 +26,7 @@ CONFIG_THUMB2_KERNEL=y
 # CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11 is not set
 # CONFIG_ARM_PATCH_IDIV is not set
 CONFIG_HIGHMEM=y
-CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_ARCH_FORCE_MAX_ORDER=11
 CONFIG_SECCOMP=y
 CONFIG_KEXEC=y
 CONFIG_EFI=y
@@ -44,19 +44,6 @@ CONFIG_ARM_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
-CONFIG_EFI_VARS=m
-CONFIG_EFI_CAPSULE_LOADER=m
-CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA1_ARM_CE=m
-CONFIG_CRYPTO_SHA2_ARM_CE=m
-CONFIG_CRYPTO_SHA512_ARM=m
-CONFIG_CRYPTO_AES_ARM=m
-CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRYPTO_AES_ARM_CE=m
-CONFIG_CRYPTO_GHASH_ARM_CE=m
-CONFIG_CRYPTO_CRC32_ARM_CE=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
@@ -64,8 +51,7 @@ CONFIG_CMDLINE_PARTITION=y
 CONFIG_CMA=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=64
+CONFIG_EFI_CAPSULE_LOADER=m
 CONFIG_OF_OVERLAY=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -109,11 +95,23 @@ CONFIG_NLS_UTF8=y
 CONFIG_KEYS=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
-CONFIG_CRYPTO_SEQIV=m
 # CONFIG_CRYPTO_ECHAINIV is not set
 CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_GHASH_ARM_CE=m
+CONFIG_CRYPTO_SHA1_ARM_NEON=m
+CONFIG_CRYPTO_SHA1_ARM_CE=m
+CONFIG_CRYPTO_SHA2_ARM_CE=m
+CONFIG_CRYPTO_SHA512_ARM=m
+CONFIG_CRYPTO_AES_ARM=m
+CONFIG_CRYPTO_AES_ARM_BS=m
+CONFIG_CRYPTO_AES_ARM_CE=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
+CONFIG_CRYPTO_CRC32_ARM_CE=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC_ITU_T=m
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
deleted file mode 100644
index 898490aaa39e..000000000000
--- a/arch/arm/configs/mini2440_defconfig
+++ /dev/null
@@ -1,334 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_ARCH_S3C24XX=y
-CONFIG_S3C_ADC=y
-CONFIG_S3C24XX_PWM=y
-# CONFIG_CPU_S3C2410 is not set
-CONFIG_CPU_S3C2440=y
-CONFIG_MACH_MINI2440=y
-CONFIG_AEABI=y
-CONFIG_KEXEC=y
-CONFIG_CPU_IDLE=y
-CONFIG_APM_EMULATION=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_DIAG=m
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_NET_PKTGEN=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-CONFIG_CONNECTOR=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_NFTL=y
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=y
-CONFIG_RFD_FTL=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_S3C2410=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_LPDDR=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_EEPROM_AT24=y
-CONFIG_SCSI=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_SG=m
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_DM9000=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MPPE=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_ZD1211RW=m
-CONFIG_ZD1211RW_DEBUG=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIO_RAW=y
-CONFIG_LEGACY_PTY_COUNT=128
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_DEV_BUS=m
-CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_S3C2410=y
-CONFIG_I2C_SIMTEC=y
-CONFIG_SPI=y
-CONFIG_SPI_S3C24XX=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_SENSORS_LM75=y
-CONFIG_THERMAL=y
-CONFIG_WATCHDOG=y
-CONFIG_S3C2410_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_S3C2410=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_SOC=y
-CONFIG_HIDRAW=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_WDM=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_CP210X=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_S3C2410=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_MMC=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SPI=y
-CONFIG_MMC_S3C=y
-CONFIG_LEDS_S3C24XX=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_S3C=y
-CONFIG_DMADEVICES=y
-CONFIG_S3C24XX_DMAC=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BOTH=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
-CONFIG_LIBCRC32C=m
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
index a5e8d2235a1a..7984640e994e 100644
--- a/arch/arm/configs/mmp2_defconfig
+++ b/arch/arm/configs/mmp2_defconfig
@@ -1,22 +1,18 @@
 CONFIG_SYSVIPC=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MMP=y
-CONFIG_MACH_BROWNSTONE=y
-CONFIG_MACH_FLINT=y
-CONFIG_MACH_MARVELL_JASPER=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_MACH_MMP2_DT=y
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255 earlyprintk"
 CONFIG_VFP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -28,9 +24,9 @@ CONFIG_IP_PNP=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_GENERIC=y
+CONFIG_MTD_RAW_NAND=y
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
@@ -39,9 +35,9 @@ CONFIG_SMC91X=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_PXA=y
@@ -55,17 +51,18 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_MAX8925=y
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX8925=y
-CONFIG_MMC=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_RESET_CONTROLLER is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
 CONFIG_MSDOS_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
@@ -73,16 +70,16 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
+CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
 # CONFIG_DYNAMIC_DEBUG is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_MMP_UART3=y
 CONFIG_EARLY_PRINTK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/moxart_defconfig b/arch/arm/configs/moxart_defconfig
index 6834e97af348..ea31f116d577 100644
--- a/arch/arm/configs/moxart_defconfig
+++ b/arch/arm/configs/moxart_defconfig
@@ -1,7 +1,7 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_ELF_CORE is not set
@@ -11,18 +11,17 @@ CONFIG_IKCONFIG_PROC=y
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MULTI_V4=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MOXART=y
 CONFIG_MACH_UC7112LX=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_ATAGS is not set
 CONFIG_ARM_APPENDED_DTB=y
+# CONFIG_SWAP is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -79,7 +78,6 @@ CONFIG_INPUT_EVBUG=y
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
@@ -119,10 +117,15 @@ CONFIG_EXT3_FS=y
 CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_JFFS2_FS=y
+CONFIG_KEYS=y
+CONFIG_CRC32_BIT=y
+CONFIG_DMA_API_DEBUG=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_KGDB=y
 CONFIG_DEBUG_PAGEALLOC=y
+# CONFIG_SLUB_DEBUG is not set
 CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_KMEMLEAK=y
 CONFIG_DEBUG_STACK_USAGE=y
@@ -132,12 +135,8 @@ CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_PROVE_LOCKING=y
-CONFIG_DMA_API_DEBUG=y
-CONFIG_KGDB=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_LL_UART_8250=y
 CONFIG_DEBUG_UART_PHYS=0x98200000
 CONFIG_DEBUG_UART_VIRT=0xf9820000
 CONFIG_EARLY_PRINTK=y
-CONFIG_KEYS=y
-CONFIG_CRC32_BIT=y
diff --git a/arch/arm/configs/mps2_defconfig b/arch/arm/configs/mps2_defconfig
index 1d923dbb9928..3ed73f184d83 100644
--- a/arch/arm/configs/mps2_defconfig
+++ b/arch/arm/configs/mps2_defconfig
@@ -1,5 +1,6 @@
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EXPERT=y
@@ -10,22 +11,17 @@ CONFIG_EXPERT=y
 # CONFIG_SIGNALFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_BLOCK is not set
 # CONFIG_MMU is not set
 CONFIG_ARCH_MPS2=y
 CONFIG_SET_MEM_PARAM=y
 CONFIG_DRAM_BASE=0x21000000
 CONFIG_DRAM_SIZE=0x1000000
-CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_ATAGS is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+# CONFIG_SUSPEND is not set
+# CONFIG_BLOCK is not set
 CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
 # CONFIG_COREDUMP is not set
-# CONFIG_SUSPEND is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -68,10 +64,9 @@ CONFIG_SMSC911X=y
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_MPS2_UART_CONSOLE=y
 CONFIG_SERIAL_MPS2_UART=y
+CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -99,9 +94,10 @@ CONFIG_NFS_V4_2=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_FS=y
+# CONFIG_SLUB_DEBUG is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_MEMTEST=y
diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig
index e530107be412..b60000a89aff 100644
--- a/arch/arm/configs/multi_v4t_defconfig
+++ b/arch/arm/configs/multi_v4t_defconfig
@@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_SLOB=y
 CONFIG_ARCH_MULTI_V4T=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_AT91=y
@@ -11,23 +10,23 @@ CONFIG_SOC_AT91RM9200=y
 CONFIG_ARCH_CLPS711X=y
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_IMX1=y
+CONFIG_ARCH_NSPIRE=y
 CONFIG_ARCH_INTEGRATOR=y
 CONFIG_ARCH_INTEGRATOR_AP=y
 CONFIG_INTEGRATOR_IMPD1=y
 CONFIG_INTEGRATOR_CM720T=y
 CONFIG_INTEGRATOR_CM920T=y
 CONFIG_INTEGRATOR_CM922T_XA10=y
-CONFIG_ARCH_NSPIRE=y
 CONFIG_AEABI=y
 # CONFIG_ATAGS is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_ARM_CLPS711X_CPUIDLE=y
 CONFIG_JUMP_LABEL=y
 CONFIG_PARTITION_ADVANCED=y
 # CONFIG_COREDUMP is not set
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -73,8 +72,6 @@ CONFIG_POWER_RESET_SYSCON_POWEROFF=y
 CONFIG_WATCHDOG=y
 CONFIG_GPIO_WATCHDOG=y
 CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_FB=y
 CONFIG_FB_CLPS711X=y
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index 9f862b21b40a..52bb1a5e25fc 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=19
@@ -12,30 +12,16 @@ CONFIG_MACH_ASPEED_G4=y
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_AT91SAM9=y
 CONFIG_ARCH_DAVINCI=y
-CONFIG_ARCH_DAVINCI_DM644x=y
-CONFIG_ARCH_DAVINCI_DM355=y
-CONFIG_ARCH_DAVINCI_DM646x=y
 CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_ARCH_DAVINCI_DM365=y
-CONFIG_MACH_SFFSDR=y
-CONFIG_MACH_NEUROS_OSD2=y
-CONFIG_MACH_DM355_LEOPARD=y
-CONFIG_MACH_MITYOMAPL138=y
-CONFIG_MACH_OMAPL138_HAWKBOARD=y
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_MX21ADS=y
-CONFIG_MACH_MX27ADS=y
-CONFIG_MACH_MX27_3DS=y
-CONFIG_MACH_IMX27_VISSTRIM_M10=y
-CONFIG_MACH_PCA100=y
 CONFIG_SOC_IMX25=y
 CONFIG_SOC_IMX27=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_KIRKWOOD=y
+CONFIG_ARCH_NPCM=y
+CONFIG_ARCH_WPCM450=y
 CONFIG_ARCH_ORION5X=y
-CONFIG_MACH_DB88F5281=y
-CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_RD88F5182_DT=y
 CONFIG_MACH_KUROBOX_PRO=y
 CONFIG_MACH_DNS323=y
@@ -43,23 +29,16 @@ CONFIG_MACH_TS209=y
 CONFIG_MACH_TERASTATION_PRO2=y
 CONFIG_MACH_LINKSTATION_PRO=y
 CONFIG_MACH_LINKSTATION_MINI=y
-CONFIG_MACH_LINKSTATION_LS_HGL=y
 CONFIG_MACH_TS409=y
-CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
 CONFIG_MACH_D2NET_DT=y
 CONFIG_MACH_NET2BIG=y
 CONFIG_MACH_MSS2_DT=y
-CONFIG_MACH_WNR854T=y
-CONFIG_MACH_RD88F5181L_GE=y
-CONFIG_MACH_RD88F5181L_FXO=y
-CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_ARCH_U300=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_VERSATILE=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CPU_FREQ=y
@@ -70,6 +49,7 @@ CONFIG_ARM_KIRKWOOD_CPUIDLE=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
+CONFIG_IOSCHED_BFQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -83,6 +63,7 @@ CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_PCI_MVEBU=y
+CONFIG_PCI_VERSATILE=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_IMX_WEIM=y
@@ -101,9 +82,9 @@ CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ORION=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_SPI_ASPEED_SMC=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_VIRTIO_BLK=y
 CONFIG_ATMEL_SSC=m
 CONFIG_EEPROM_AT24=y
 # CONFIG_SCSI_PROC_FS is not set
@@ -141,7 +122,10 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_ASPEED_VUART=m
+CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_SERIAL_ATMEL_TTYAT=y
@@ -155,17 +139,18 @@ CONFIG_HW_RANDOM_TIMERIOMEM=m
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_ASPEED=m
 CONFIG_I2C_AT91=y
+CONFIG_I2C_GPIO=m
 CONFIG_I2C_IMX=y
 CONFIG_I2C_MV64XXX=y
-CONFIG_I2C_NOMADIK=y
 CONFIG_SPI=y
+CONFIG_SPI_ASPEED_SMC=y
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_ORION=y
+CONFIG_SPI_SUN6I=y
 CONFIG_GPIO_ASPEED=m
 CONFIG_GPIO_ASPEED_SGPIO=y
 CONFIG_GPIO_MXC=y
-CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_QNAP=y
 CONFIG_SENSORS_ADT7475=y
@@ -178,20 +163,24 @@ CONFIG_THERMAL=y
 CONFIG_KIRKWOOD_THERMAL=y
 CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
+CONFIG_SUNXI_WATCHDOG=y
+CONFIG_NPCM7XX_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_ATMEL_HLCDC=y
-# CONFIG_ABX500_CORE is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_ASPEED=m
 CONFIG_VIDEO_ATMEL_ISI=m
 CONFIG_DRM=y
 CONFIG_DRM_ATMEL_HLCDC=m
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_ASPEED_GFX=m
+CONFIG_FB=y
 CONFIG_FB_IMX=y
 CONFIG_FB_ATMEL=y
 CONFIG_BACKLIGHT_ATMEL_LCDC=y
@@ -204,7 +193,8 @@ CONFIG_SND_ATMEL_SOC_WM8904=m
 CONFIG_SND_AT91_SOC_SAM9X5_WM8731=m
 CONFIG_SND_KIRKWOOD_SOC=y
 CONFIG_SND_SOC_ALC5623=y
-CONFIG_SND_SOC_WM8731=y
+CONFIG_SND_SOC_WM8731_I2C=y
+CONFIG_SND_SOC_WM8731_SPI=y
 CONFIG_SND_SIMPLE_CARD=y
 CONFIG_HID_DRAGONRISE=y
 CONFIG_HID_GYRATION=y
@@ -245,6 +235,7 @@ CONFIG_MMC_SDHCI_PLTFM=m
 CONFIG_MMC_SDHCI_OF_ASPEED=m
 CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_MVSDIO=y
+CONFIG_MMC_SUNXI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
@@ -264,6 +255,8 @@ CONFIG_RTC_DRV_ASPEED=m
 CONFIG_DMADEVICES=y
 CONFIG_AT_HDMAC=y
 CONFIG_MV_XOR=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_MMIO=y
 CONFIG_STAGING=y
 CONFIG_ASPEED_LPC_CTRL=m
 CONFIG_ASPEED_LPC_SNOOP=m
@@ -298,10 +291,10 @@ CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_DEV_MARVELL_CESA=y
 CONFIG_CRC_CCITT=y
 CONFIG_LIBCRC32C=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 3823da605430..871fffe92187 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -1,11 +1,12 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_ARCH_VIRT=y
+CONFIG_ARCH_AIROHA=y
 CONFIG_ARCH_ACTIONS=y
 CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_ARTPEC=y
@@ -16,6 +17,8 @@ CONFIG_ARCH_AT91=y
 CONFIG_SOC_SAMA5D2=y
 CONFIG_SOC_SAMA5D3=y
 CONFIG_SOC_SAMA5D4=y
+CONFIG_SOC_SAMA7G5=y
+CONFIG_SOC_LAN966=y
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM_CYGNUS=y
 CONFIG_ARCH_BCM_HR2=y
@@ -23,9 +26,14 @@ CONFIG_ARCH_BCM_NSP=y
 CONFIG_ARCH_BCM_5301X=y
 CONFIG_ARCH_BCM_281XX=y
 CONFIG_ARCH_BCM_21664=y
+CONFIG_ARCH_BCM_23550=y
 CONFIG_ARCH_BCM2835=y
-CONFIG_ARCH_BCM_63XX=y
+CONFIG_ARCH_BCM_53573=y
 CONFIG_ARCH_BRCMSTB=y
+CONFIG_ARCH_BCMBCA=y
+CONFIG_ARCH_BCMBCA_CORTEXA7=y
+CONFIG_ARCH_BCMBCA_CORTEXA9=y
+CONFIG_ARCH_BCMBCA_BRAHMAB15=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_MACH_BERLIN_BG2=y
 CONFIG_MACH_BERLIN_BG2CD=y
@@ -38,6 +46,8 @@ CONFIG_ARCH_HI3xxx=y
 CONFIG_ARCH_HIP01=y
 CONFIG_ARCH_HIP04=y
 CONFIG_ARCH_HIX5HD2=y
+CONFIG_ARCH_HPE=y
+CONFIG_ARCH_HPE_GXP=y
 CONFIG_ARCH_MXC=y
 CONFIG_SOC_IMX50=y
 CONFIG_SOC_IMX51=y
@@ -72,20 +82,21 @@ CONFIG_SOC_OMAP5=y
 CONFIG_SOC_AM33XX=y
 CONFIG_SOC_AM43XX=y
 CONFIG_SOC_DRA7XX=y
-CONFIG_ARCH_SIRF=y
 CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_MSM8X60=y
+CONFIG_ARCH_MSM8916=y
 CONFIG_ARCH_MSM8960=y
 CONFIG_ARCH_MSM8974=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_RENESAS=y
-CONFIG_ARCH_SOCFPGA=y
+CONFIG_ARCH_INTEL_SOCFPGA=y
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR13XX=y
 CONFIG_MACH_SPEAR1310=y
 CONFIG_MACH_SPEAR1340=y
 CONFIG_ARCH_STI=y
 CONFIG_ARCH_STM32=y
+CONFIG_ARCH_SUNPLUS=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_ARCH_UNIPHIER=y
@@ -96,7 +107,6 @@ CONFIG_ARCH_WM8850=y
 CONFIG_ARCH_ZYNQ=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=16
-CONFIG_SECCOMP=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_KEXEC=y
@@ -110,37 +120,23 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_ARM_IMX6Q_CPUFREQ=y
-CONFIG_ARM_SCMI_CPUFREQ=y
+CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
 CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
+CONFIG_ARM_SCMI_CPUFREQ=y
 CONFIG_QORIQ_CPUFREQ=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
+CONFIG_ARM_PSCI_CPUIDLE=y
 CONFIG_ARM_ZYNQ_CPUIDLE=y
 CONFIG_ARM_EXYNOS_CPUIDLE=y
 CONFIG_ARM_TEGRA_CPUIDLE=y
+CONFIG_ARM_QCOM_SPM_CPUIDLE=y
 CONFIG_KERNEL_MODE_NEON=y
-CONFIG_ARM_SCMI_PROTOCOL=y
-CONFIG_RASPBERRYPI_FIRMWARE=y
-CONFIG_TRUSTED_FOUNDATIONS=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_EFI_VARS=m
-CONFIG_EFI_CAPSULE_LOADER=m
-CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA1_ARM_CE=m
-CONFIG_CRYPTO_SHA2_ARM_CE=m
-CONFIG_CRYPTO_SHA512_ARM=m
-CONFIG_CRYPTO_AES_ARM=m
-CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRYPTO_AES_ARM_CE=m
-CONFIG_CRYPTO_GHASH_ARM_CE=m
-CONFIG_CRYPTO_CRC32_ARM_CE=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_CMDLINE_PARTITION=y
+CONFIG_IOSCHED_BFQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -157,20 +153,16 @@ CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_NET_SWITCHDEV=y
 CONFIG_NET_DSA=m
+CONFIG_QRTR=m
+CONFIG_QRTR_SMD=m
 CONFIG_CAN=y
-CONFIG_CAN_AT91=m
-CONFIG_CAN_FLEXCAN=m
-CONFIG_CAN_SUN4I=y
-CONFIG_CAN_XILINXCAN=y
-CONFIG_CAN_RCAR=m
-CONFIG_CAN_MCP251X=y
 CONFIG_BT=m
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_BCM=y
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_QCOMSMD=m
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_RFKILL=y
@@ -190,13 +182,19 @@ CONFIG_PCI_TEGRA=y
 CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCIE_RCAR_HOST=y
 CONFIG_PCI_DRA7XX_EP=y
+CONFIG_PCI_LAYERSCAPE=y
 CONFIG_PCI_ENDPOINT=y
 CONFIG_PCI_ENDPOINT_CONFIGFS=y
 CONFIG_PCI_EPF_TEST=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_OMAP_OCP2SCP=y
-CONFIG_SIMPLE_PM_BUS=y
+CONFIG_ARM_SCMI_PROTOCOL=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_TRUSTED_FOUNDATIONS=y
+CONFIG_BCM47XX_NVRAM=y
+CONFIG_BCM47XX_SPROM=y
+CONFIG_EFI_CAPSULE_LOADER=m
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -215,8 +213,8 @@ CONFIG_MTD_NAND_GPMI_NAND=y
 CONFIG_MTD_NAND_VF610_NFC=y
 CONFIG_MTD_NAND_DAVINCI=y
 CONFIG_MTD_NAND_STM32_FMC2=y
+CONFIG_MTD_NAND_PL35X=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_SPI_ASPEED_SMC=m
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -227,6 +225,7 @@ CONFIG_AD525X_DPOT_I2C=y
 CONFIG_ICS932S401=y
 CONFIG_ATMEL_SSC=m
 CONFIG_QCOM_COINCELL=m
+CONFIG_QCOM_FASTRPC=m
 CONFIG_APDS9802ALS=y
 CONFIG_ISL29003=y
 CONFIG_PCI_ENDPOINT_TEST=m
@@ -242,18 +241,19 @@ CONFIG_AHCI_ST=y
 CONFIG_AHCI_IMX=y
 CONFIG_AHCI_SUNXI=y
 CONFIG_AHCI_TEGRA=y
+CONFIG_AHCI_QORIQ=y
 CONFIG_SATA_HIGHBANK=y
 CONFIG_SATA_MV=y
 CONFIG_SATA_RCAR=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_VENDOR_ASIX=y
-CONFIG_SPI_AX88796C=m
 CONFIG_VIRTIO_NET=y
 CONFIG_B53_SPI_DRIVER=m
 CONFIG_B53_MDIO_DRIVER=m
 CONFIG_B53_MMAP_DRIVER=m
 CONFIG_NET_DSA_BCM_SF2=m
+CONFIG_NET_DSA_RZN1_A5PSW=m
 CONFIG_SUN4I_EMAC=y
+CONFIG_SPI_AX88796C=m
 CONFIG_BCMGENET=m
 CONFIG_BGMAC_BCMA=y
 CONFIG_SYSTEMPORT=m
@@ -268,6 +268,7 @@ CONFIG_MV643XX_ETH=y
 CONFIG_MVNETA=y
 CONFIG_PXA168_ETH=m
 CONFIG_KS8851=y
+CONFIG_LAN966X_SWITCH=m
 CONFIG_R8169=y
 CONFIG_SH_ETH=y
 CONFIG_SMSC911X=y
@@ -278,20 +279,27 @@ CONFIG_TI_CPSW=y
 CONFIG_TI_CPSW_SWITCHDEV=y
 CONFIG_TI_CPTS=y
 CONFIG_XILINX_EMACLITE=y
+CONFIG_SFP=m
 CONFIG_BROADCOM_PHY=y
 CONFIG_ICPLUS_PHY=y
-CONFIG_DP83867_PHY=y
 CONFIG_MARVELL_PHY=y
-CONFIG_MICREL_PHY=y
 CONFIG_AT803X_PHY=y
 CONFIG_ROCKCHIP_PHY=y
-CONFIG_SMSC_PHY=y
+CONFIG_DP83867_PHY=y
+CONFIG_CAN_AT91=m
+CONFIG_CAN_FLEXCAN=m
+CONFIG_CAN_SUN4I=y
+CONFIG_CAN_XILINXCAN=y
+CONFIG_CAN_RCAR=m
+CONFIG_CAN_MCP251X=y
+CONFIG_MDIO_MSCC_MIIM=m
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_RTL8152=m
 CONFIG_USB_LAN78XX=m
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
+CONFIG_WCN36XX=m
 CONFIG_BRCMFMAC=m
 CONFIG_MWIFIEX=m
 CONFIG_MWIFIEX_SDIO=m
@@ -315,11 +323,13 @@ CONFIG_TOUCHSCREEN_ADC=m
 CONFIG_TOUCHSCREEN_ATMEL_MXT=m
 CONFIG_TOUCHSCREEN_ELAN=m
 CONFIG_TOUCHSCREEN_MMS114=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
 CONFIG_TOUCHSCREEN_WM97XX=m
 CONFIG_TOUCHSCREEN_ST1232=m
 CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_TOUCHSCREEN_SUN4I=y
 CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PM8941_PWRKEY=y
 CONFIG_INPUT_MAX77693_HAPTIC=m
 CONFIG_INPUT_MAX8997_HAPTIC=m
 CONFIG_INPUT_CPCAP_PWRBUTTON=m
@@ -352,8 +362,6 @@ CONFIG_SERIAL_MESON=y
 CONFIG_SERIAL_MESON_CONSOLE=y
 CONFIG_SERIAL_SAMSUNG=y
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_SIRFSOC=y
-CONFIG_SERIAL_SIRFSOC_CONSOLE=y
 CONFIG_SERIAL_TEGRA=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
@@ -363,8 +371,6 @@ CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_SERIAL_VT8500=y
 CONFIG_SERIAL_VT8500_CONSOLE=y
-CONFIG_SERIAL_OMAP=y
-CONFIG_SERIAL_OMAP_CONSOLE=y
 CONFIG_SERIAL_BCM63XX=y
 CONFIG_SERIAL_BCM63XX_CONSOLE=y
 CONFIG_SERIAL_XILINX_PS_UART=y
@@ -378,7 +384,6 @@ CONFIG_SERIAL_ST_ASC_CONSOLE=y
 CONFIG_SERIAL_STM32=y
 CONFIG_SERIAL_STM32_CONSOLE=y
 CONFIG_SERIAL_OWL=y
-CONFIG_SERIAL_OWL_CONSOLE=y
 CONFIG_SERIAL_DEV_BUS=y
 CONFIG_VIRTIO_CONSOLE=y
 CONFIG_ASPEED_KCS_IPMI_BMC=m
@@ -389,6 +394,7 @@ CONFIG_TCG_TPM=m
 CONFIG_TCG_TIS_I2C_INFINEON=m
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_ARB_GPIO_CHALLENGE=m
+CONFIG_I2C_MUX_GPIO=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
 CONFIG_I2C_DEMUX_PINCTRL=y
@@ -404,11 +410,12 @@ CONFIG_I2C_IMX=y
 CONFIG_I2C_MESON=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_OWL=y
+CONFIG_I2C_QCOM_CCI=m
+CONFIG_I2C_QUP=y
 CONFIG_I2C_RIIC=y
 CONFIG_I2C_RK3X=y
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SH_MOBILE=y
-CONFIG_I2C_SIRF=y
 CONFIG_I2C_ST=y
 CONFIG_I2C_STM32F7=y
 CONFIG_I2C_SUN6I_P2WI=y
@@ -420,12 +427,15 @@ CONFIG_I2C_RCAR=y
 CONFIG_I2C_CROS_EC_TUNNEL=m
 CONFIG_I2C_SLAVE_EEPROM=y
 CONFIG_SPI=y
+CONFIG_SPI_ASPEED_SMC=m
 CONFIG_SPI_ATMEL=m
+CONFIG_SPI_ATMEL_QUADSPI=m
 CONFIG_SPI_BCM2835=y
 CONFIG_SPI_BCM2835AUX=y
 CONFIG_SPI_CADENCE=y
 CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_FSL_QUADSPI=m
+CONFIG_SPI_GXP=m
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_FSL_DSPI=m
 CONFIG_SPI_OMAP24XX=y
@@ -433,10 +443,10 @@ CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_ROCKCHIP=m
 CONFIG_SPI_RSPI=y
+CONFIG_SPI_QUP=m
 CONFIG_SPI_S3C64XX=m
 CONFIG_SPI_SH_MSIOF=m
 CONFIG_SPI_SH_HSPI=y
-CONFIG_SPI_SIRF=y
 CONFIG_SPI_STM32=m
 CONFIG_SPI_STM32_QSPI=y
 CONFIG_SPI_SUN4I=y
@@ -447,13 +457,14 @@ CONFIG_SPI_TEGRA20_SLINK=y
 CONFIG_SPI_XILINX=y
 CONFIG_SPI_SPIDEV=y
 CONFIG_SPMI=y
-CONFIG_PTP_1588_CLOCK=y
 CONFIG_PINCTRL_AS3722=y
-CONFIG_PINCTRL_RZA2=y
-CONFIG_PINCTRL_STMFX=y
+CONFIG_PINCTRL_MICROCHIP_SGPIO=y
+CONFIG_PINCTRL_OCELOT=y
 CONFIG_PINCTRL_PALMAS=y
+CONFIG_PINCTRL_STMFX=y
 CONFIG_PINCTRL_OWL=y
 CONFIG_PINCTRL_S500=y
+CONFIG_PINCTRL_MSM=y
 CONFIG_PINCTRL_APQ8064=y
 CONFIG_PINCTRL_APQ8084=y
 CONFIG_PINCTRL_IPQ8064=y
@@ -463,10 +474,14 @@ CONFIG_PINCTRL_MSM8X74=y
 CONFIG_PINCTRL_MSM8916=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
+CONFIG_PINCTRL_RZA2=y
+CONFIG_PINCTRL_RZN1=y
 CONFIG_GPIO_ASPEED_SGPIO=y
 CONFIG_GPIO_DAVINCI=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_EM=y
+CONFIG_GPIO_MPC8XXX=y
+CONFIG_GPIO_MXC=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_SYSCON=y
 CONFIG_GPIO_UNIPHIER=y
@@ -476,15 +491,15 @@ CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_PALMAS=y
+CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
 CONFIG_GPIO_TWL4030=y
-CONFIG_GPIO_MXC=y
-CONFIG_POWER_AVS=y
-CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_MSM=y
+CONFIG_POWER_RESET_QCOM_PON=y
 CONFIG_POWER_RESET_ST=y
 CONFIG_POWER_RESET_KEYSTONE=y
 CONFIG_POWER_RESET_RMOBILE=y
@@ -501,28 +516,35 @@ CONFIG_CHARGER_MAX14577=m
 CONFIG_CHARGER_MAX77693=m
 CONFIG_CHARGER_MAX8997=m
 CONFIG_CHARGER_MAX8998=m
+CONFIG_CHARGER_SMB347=m
 CONFIG_CHARGER_TPS65090=y
+CONFIG_BATTERY_ACER_A500=m
 CONFIG_SENSORS_ARM_SCMI=y
 CONFIG_SENSORS_ASPEED=m
 CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_LAN966X=m
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM95245=y
 CONFIG_SENSORS_NTC_THERMISTOR=m
 CONFIG_SENSORS_PWM_FAN=m
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_GXP_FAN_CTRL=m
 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
 CONFIG_IMX_THERMAL=y
+CONFIG_QORIQ_THERMAL=m
 CONFIG_ROCKCHIP_THERMAL=y
 CONFIG_RCAR_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
 CONFIG_BCM2711_THERMAL=m
 CONFIG_BCM2835_THERMAL=m
 CONFIG_BRCMSTB_THERMAL=m
-CONFIG_GENERIC_ADC_THERMAL=m
 CONFIG_ST_THERMAL_MEMMAP=y
 CONFIG_TEGRA_SOCTHERM=m
+CONFIG_TEGRA30_TSENSOR=m
+CONFIG_GENERIC_ADC_THERMAL=m
+CONFIG_QCOM_TSENS=y
 CONFIG_UNIPHIER_THERMAL=y
 CONFIG_DA9063_WATCHDOG=m
 CONFIG_XILINX_WATCHDOG=y
@@ -538,15 +560,19 @@ CONFIG_SUNXI_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_ST_LPC_WATCHDOG=y
 CONFIG_TEGRA_WATCHDOG=m
+CONFIG_QCOM_WDT=m
 CONFIG_MESON_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_RENESAS_WDT=m
 CONFIG_RENESAS_RZAWDT=m
+CONFIG_RENESAS_RZN1WDT=m
 CONFIG_STPMIC1_WATCHDOG=y
+CONFIG_PM8916_WATCHDOG=m
 CONFIG_BCM47XX_WDT=y
 CONFIG_BCM2835_WDT=y
 CONFIG_BCM_KONA_WDT=y
 CONFIG_BCM7038_WDT=m
+CONFIG_GXP_WATCHDOG=y
 CONFIG_BCMA_HOST_SOC=y
 CONFIG_BCMA_DRIVER_GMAC_CMN=y
 CONFIG_BCMA_DRIVER_GPIO=y
@@ -574,7 +600,6 @@ CONFIG_MFD_RK808=y
 CONFIG_MFD_RN5T618=y
 CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_STMPE=y
-CONFIG_STMPE_I2C=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
 CONFIG_MFD_TPS65217=y
@@ -583,6 +608,7 @@ CONFIG_MFD_TPS6586X=y
 CONFIG_MFD_TPS65910=y
 CONFIG_MFD_STM32_LPTIMER=m
 CONFIG_MFD_STPMIC1=y
+CONFIG_MFD_ACER_A500_EC=m
 CONFIG_REGULATOR_ACT8865=y
 CONFIG_REGULATOR_ACT8945A=y
 CONFIG_REGULATOR_ANATOP=y
@@ -609,7 +635,8 @@ CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_PBIAS=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_QCOM_RPM=y
-CONFIG_REGULATOR_QCOM_SMD_RPM=m
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_QCOM_SPMI=y
 CONFIG_REGULATOR_RK808=y
 CONFIG_REGULATOR_RN5T618=y
 CONFIG_REGULATOR_S2MPA01=m
@@ -630,40 +657,39 @@ CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
 CONFIG_REGULATOR_VEXPRESS=y
 CONFIG_REGULATOR_WM8994=m
+CONFIG_CEC_SAMSUNG_S5P=m
+CONFIG_CEC_STM32=m
 CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_CEC_SUPPORT=y
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_MMP_CAMERA=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_ASPEED=m
-CONFIG_VIDEO_STM32_DCMI=m
+CONFIG_VIDEO_ATMEL_ISI=m
+CONFIG_VIDEO_MMP_CAMERA=m
+CONFIG_VIDEO_MICROCHIP_ISC=m
+CONFIG_VIDEO_MICROCHIP_XISC=m
+CONFIG_VIDEO_MICROCHIP_CSI2DC=m
+CONFIG_VIDEO_TEGRA_VDE=m
 CONFIG_VIDEO_RENESAS_CEU=m
+CONFIG_VIDEO_RCAR_VIN=m
+CONFIG_VIDEO_RENESAS_FDP1=m
+CONFIG_VIDEO_RENESAS_JPU=m
+CONFIG_VIDEO_RENESAS_VSP1=m
+CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
 CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
 CONFIG_VIDEO_S5P_FIMC=m
 CONFIG_VIDEO_S5P_MIPI_CSIS=m
 CONFIG_VIDEO_EXYNOS_FIMC_LITE=m
 CONFIG_VIDEO_EXYNOS4_FIMC_IS=m
-CONFIG_VIDEO_RCAR_VIN=m
-CONFIG_VIDEO_ATMEL_ISI=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
 CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
-CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
 CONFIG_VIDEO_STI_BDISP=m
-CONFIG_VIDEO_STI_HVA=m
 CONFIG_VIDEO_STI_DELTA=m
-CONFIG_VIDEO_RENESAS_FDP1=m
-CONFIG_VIDEO_RENESAS_JPU=m
-CONFIG_VIDEO_RENESAS_VSP1=m
+CONFIG_VIDEO_STI_HVA=m
+CONFIG_VIDEO_STM32_DCMI=m
 CONFIG_V4L_TEST_DRIVERS=y
 CONFIG_VIDEO_VIVID=m
-CONFIG_CEC_PLATFORM_DRIVERS=y
-CONFIG_CEC_SAMSUNG_S5P=m
-CONFIG_CEC_STM32=m
 CONFIG_VIDEO_ADV7180=m
 CONFIG_VIDEO_ADV7604=m
 CONFIG_VIDEO_ADV7604_CEC=y
@@ -672,6 +698,7 @@ CONFIG_IMX_IPUV3_CORE=m
 CONFIG_DRM=y
 # CONFIG_DRM_I2C_CH7006 is not set
 # CONFIG_DRM_I2C_SIL164 is not set
+CONFIG_DRM_I2C_NXP_TDA998X=m
 CONFIG_DRM_NOUVEAU=m
 CONFIG_DRM_EXYNOS=m
 CONFIG_DRM_EXYNOS_FIMD=y
@@ -684,35 +711,41 @@ CONFIG_ROCKCHIP_ANALOGIX_DP=y
 CONFIG_ROCKCHIP_DW_HDMI=y
 CONFIG_ROCKCHIP_DW_MIPI_DSI=y
 CONFIG_ROCKCHIP_INNO_HDMI=y
-CONFIG_DRM_IMX=m
-CONFIG_DRM_IMX_PARALLEL_DISPLAY=m
-CONFIG_DRM_IMX_TVE=m
-CONFIG_DRM_IMX_LDB=m
-CONFIG_DRM_IMX_HDMI=m
 CONFIG_DRM_ATMEL_HLCDC=m
 CONFIG_DRM_RCAR_DU=m
-CONFIG_DRM_RCAR_LVDS=y
 CONFIG_DRM_SUN4I=m
 CONFIG_DRM_MSM=m
 CONFIG_DRM_FSL_DCU=m
 CONFIG_DRM_TEGRA=y
 CONFIG_DRM_STM=m
 CONFIG_DRM_STM_DSI=m
+CONFIG_DRM_PANEL_LVDS=m
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_PANEL_SAMSUNG_LD9040=m
 CONFIG_DRM_PANEL_ORISETECH_OTM8009A=m
 CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
 CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
+CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=m
+CONFIG_DRM_DISPLAY_CONNECTOR=m
+CONFIG_DRM_LVDS_CODEC=m
 CONFIG_DRM_NXP_PTN3460=m
 CONFIG_DRM_PARADE_PS8622=m
 CONFIG_DRM_SII902X=m
 CONFIG_DRM_SII9234=m
 CONFIG_DRM_SIMPLE_BRIDGE=m
 CONFIG_DRM_TOSHIBA_TC358764=m
+CONFIG_DRM_TOSHIBA_TC358768=m
 CONFIG_DRM_I2C_ADV7511=m
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
 CONFIG_DRM_STI=m
+CONFIG_DRM_IMX=m
+CONFIG_DRM_IMX_PARALLEL_DISPLAY=m
+CONFIG_DRM_IMX_TVE=m
+CONFIG_DRM_IMX_LDB=m
+CONFIG_DRM_IMX_HDMI=m
+CONFIG_DRM_V3D=m
 CONFIG_DRM_VC4=m
 CONFIG_DRM_ETNAVIV=m
 CONFIG_DRM_MXSFB=m
@@ -720,6 +753,7 @@ CONFIG_DRM_PL111=m
 CONFIG_DRM_LIMA=m
 CONFIG_DRM_PANFROST=m
 CONFIG_DRM_ASPEED_GFX=m
+CONFIG_FB=y
 CONFIG_FB_EFI=y
 CONFIG_FB_WM8505=y
 CONFIG_FB_SH_MOBILE_LCDC=y
@@ -743,10 +777,13 @@ CONFIG_SND_ATMEL_SOC_WM8904=m
 CONFIG_SND_ATMEL_SOC_PDMIC=m
 CONFIG_SND_ATMEL_SOC_I2S=m
 CONFIG_SND_BCM2835_SOC_I2S=m
-CONFIG_SND_SOC_FSL_SAI=m
-CONFIG_SND_MMP_SOC=y
+CONFIG_SND_IMX_SOC=m
+CONFIG_SND_SOC_FSL_ASOC_CARD=m
 CONFIG_SND_PXA_SOC_SSP=m
+CONFIG_SND_MMP_SOC_SSPA=m
 CONFIG_SND_PXA910_SOC=m
+CONFIG_SND_SOC_QCOM=m
+CONFIG_SND_SOC_APQ8016_SBC=m
 CONFIG_SND_SOC_ROCKCHIP=m
 CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
 CONFIG_SND_SOC_ROCKCHIP_MAX98090=m
@@ -768,6 +805,7 @@ CONFIG_SND_SOC_STM32_DFSDM=m
 CONFIG_SND_SUN4I_CODEC=m
 CONFIG_SND_SOC_TEGRA=m
 CONFIG_SND_SOC_TEGRA20_I2S=m
+CONFIG_SND_SOC_TEGRA20_SPDIF=m
 CONFIG_SND_SOC_TEGRA30_I2S=m
 CONFIG_SND_SOC_TEGRA_RT5640=m
 CONFIG_SND_SOC_TEGRA_WM8753=m
@@ -776,12 +814,19 @@ CONFIG_SND_SOC_TEGRA_WM9712=m
 CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
 CONFIG_SND_SOC_TEGRA_ALC5632=m
 CONFIG_SND_SOC_TEGRA_MAX98090=m
+CONFIG_SND_SOC_DAVINCI_MCASP=m
+CONFIG_SND_SOC_AC97_CODEC=m
 CONFIG_SND_SOC_AK4642=m
 CONFIG_SND_SOC_CPCAP=m
 CONFIG_SND_SOC_CS42L51_I2C=m
+CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
+CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
 CONFIG_SND_SOC_SGTL5000=m
-CONFIG_SND_SOC_SPDIF=m
 CONFIG_SND_SOC_STI_SAS=m
+CONFIG_SND_SOC_TLV320AIC32X4=m
+CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
+CONFIG_SND_SOC_WM8960=m
+CONFIG_SND_SOC_WM8962=m
 CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
 CONFIG_USB=y
@@ -789,9 +834,10 @@ CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_MVEBU=y
 CONFIG_USB_XHCI_TEGRA=m
+CONFIG_USB_BRCMSTB=m
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=m
 CONFIG_USB_EHCI_HCD_STI=y
-CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_EHCI_EXYNOS=m
 CONFIG_USB_EHCI_MV=m
 CONFIG_USB_OHCI_HCD=y
@@ -819,17 +865,18 @@ CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_USB_ISP1760=y
 CONFIG_USB_HSIC_USB3503=y
+CONFIG_USB_ONBOARD_HUB=m
 CONFIG_AB8500_USB=y
 CONFIG_KEYSTONE_USB_PHY=m
-CONFIG_NOP_USB_XCEIV=m
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_AM335X_PHY_USB=m
 CONFIG_TWL6030_USB=m
 CONFIG_USB_GPIO_VBUS=y
 CONFIG_USB_ISP1301=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_FSL_USB2=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_RENESAS_USBF=m
 CONFIG_USB_ASPEED_VHUB=m
 CONFIG_USB_CONFIGFS=m
 CONFIG_USB_CONFIGFS_SERIAL=y
@@ -852,6 +899,8 @@ CONFIG_USB_CONFIGFS_F_UVC=y
 CONFIG_USB_CONFIGFS_F_PRINTER=y
 CONFIG_USB_ETH=m
 CONFIG_TYPEC=m
+CONFIG_TYPEC_UCSI=m
+CONFIG_UCSI_STM32G0=m
 CONFIG_TYPEC_STUSB160X=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
@@ -870,6 +919,7 @@ CONFIG_MMC_SDHCI_PXAV2=m
 CONFIG_MMC_SDHCI_SPEAR=y
 CONFIG_MMC_SDHCI_S3C_DMA=y
 CONFIG_MMC_SDHCI_BCM_KONA=y
+CONFIG_MMC_MESON_MX_SDHC=y
 CONFIG_MMC_MESON_MX_SDIO=y
 CONFIG_MMC_SDHCI_ST=y
 CONFIG_MMC_OMAP=y
@@ -891,11 +941,14 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_CLASS_FLASH=m
 CONFIG_LEDS_CPCAP=m
+CONFIG_LEDS_PCA9532=m
+CONFIG_LEDS_PCA9532_GPIO=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
-CONFIG_LEDS_MAX77693=m
 CONFIG_LEDS_MAX8997=m
+CONFIG_LEDS_ACER_A500=m
 CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_MAX77693=m
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
@@ -906,6 +959,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_LEDS_TRIGGER_TRANSIENT=y
 CONFIG_LEDS_TRIGGER_CAMERA=y
 CONFIG_EDAC=y
+CONFIG_EDAC_LAYERSCAPE=y
 CONFIG_EDAC_HIGHBANK_MC=y
 CONFIG_EDAC_HIGHBANK_L2=y
 CONFIG_RTC_CLASS=y
@@ -919,6 +973,7 @@ CONFIG_RTC_DRV_MAX8997=m
 CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_PCF85063=m
 CONFIG_RTC_DRV_PCF85363=m
 CONFIG_RTC_DRV_BQ32K=m
 CONFIG_RTC_DRV_TWL4030=y
@@ -938,9 +993,11 @@ CONFIG_RTC_DRV_SH=m
 CONFIG_RTC_DRV_PL031=y
 CONFIG_RTC_DRV_AT91RM9200=m
 CONFIG_RTC_DRV_AT91SAM9=m
+CONFIG_RTC_DRV_RZN1=m
 CONFIG_RTC_DRV_VT8500=y
 CONFIG_RTC_DRV_SUNXI=y
 CONFIG_RTC_DRV_MV=y
+CONFIG_RTC_DRV_PM8XXX=m
 CONFIG_RTC_DRV_TEGRA=y
 CONFIG_RTC_DRV_ST_LPC=y
 CONFIG_RTC_DRV_STM32=y
@@ -958,7 +1015,6 @@ CONFIG_MV_XOR=y
 CONFIG_MXS_DMA=y
 CONFIG_OWL_DMA=y
 CONFIG_PL330_DMA=y
-CONFIG_SIRF_DMA=y
 CONFIG_STE_DMA40=y
 CONFIG_ST_FDMA=m
 CONFIG_STM32_DMA=y
@@ -969,6 +1025,7 @@ CONFIG_UNIPHIER_MDMAC=y
 CONFIG_XILINX_DMA=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_DW_DMAC=y
+CONFIG_RZN1_DMAMUX=m
 CONFIG_RCAR_DMAC=y
 CONFIG_RENESAS_USB_DMAC=m
 CONFIG_VIRTIO_PCI=y
@@ -980,57 +1037,82 @@ CONFIG_SERIO_NVEC_PS2=y
 CONFIG_NVEC_POWER=y
 CONFIG_NVEC_PAZ00=y
 CONFIG_STAGING_BOARD=y
-CONFIG_MFD_CROS_EC_DEV=m
+CONFIG_CHROME_PLATFORMS=y
+CONFIG_CROS_EC=m
 CONFIG_CROS_EC_I2C=m
 CONFIG_CROS_EC_SPI=m
 CONFIG_COMMON_CLK_MAX77686=y
 CONFIG_COMMON_CLK_RK808=m
 CONFIG_COMMON_CLK_SCMI=y
+CONFIG_COMMON_CLK_LAN966X=y
 CONFIG_COMMON_CLK_S2MPS11=m
-CONFIG_CLK_ACTIONS=y
-CONFIG_CLK_OWL_S500=y
 CONFIG_CLK_RASPBERRYPI=y
 CONFIG_COMMON_CLK_QCOM=y
+CONFIG_QCOM_A53PLL=y
+CONFIG_QCOM_CLK_APCS_MSM8916=y
 CONFIG_QCOM_CLK_RPM=y
+CONFIG_QCOM_CLK_SMD_RPM=y
 CONFIG_APQ_MMCC_8084=y
 CONFIG_MSM_GCC_8660=y
+CONFIG_MSM_GCC_8916=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_BCM2835_MBOX=y
+CONFIG_QCOM_APCS_IPC=y
+CONFIG_QCOM_IPCC=y
 CONFIG_ROCKCHIP_IOMMU=y
 CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_EXYNOS_IOMMU=y
+CONFIG_QCOM_IOMMU=y
 CONFIG_REMOTEPROC=y
+CONFIG_QCOM_Q6V5_MSS=m
+CONFIG_QCOM_SYSMON=m
+CONFIG_QCOM_WCNSS_PIL=m
 CONFIG_ST_REMOTEPROC=m
+CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RPMSG_VIRTIO=m
 CONFIG_ASPEED_LPC_CTRL=m
 CONFIG_ASPEED_LPC_SNOOP=m
 CONFIG_ASPEED_P2A_CTRL=m
 CONFIG_RASPBERRYPI_POWER=y
+CONFIG_QCOM_COMMAND_DB=m
+CONFIG_QCOM_CPR=y
 CONFIG_QCOM_GSBI=y
-CONFIG_QCOM_PM=y
-CONFIG_QCOM_SMD_RPM=m
+CONFIG_QCOM_OCMEM=m
+CONFIG_QCOM_RMTFS_MEM=m
+CONFIG_QCOM_RPMH=y
+CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_RPMPD=y
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMP2P=y
+CONFIG_QCOM_SMSM=y
+CONFIG_QCOM_SOCINFO=m
+CONFIG_QCOM_STATS=m
 CONFIG_QCOM_WCNSS_CTRL=m
 CONFIG_ARCH_EMEV2=y
+CONFIG_ARCH_R8A7794=y
+CONFIG_ARCH_R8A7779=y
+CONFIG_ARCH_R8A7790=y
+CONFIG_ARCH_R8A7778=y
+CONFIG_ARCH_R8A7793=y
+CONFIG_ARCH_R8A7791=y
+CONFIG_ARCH_R8A7792=y
+CONFIG_ARCH_R8A7740=y
+CONFIG_ARCH_R8A73A4=y
 CONFIG_ARCH_R7S72100=y
 CONFIG_ARCH_R7S9210=y
-CONFIG_ARCH_R8A73A4=y
-CONFIG_ARCH_R8A7740=y
+CONFIG_ARCH_R8A77470=y
+CONFIG_ARCH_R8A7745=y
 CONFIG_ARCH_R8A7742=y
 CONFIG_ARCH_R8A7743=y
 CONFIG_ARCH_R8A7744=y
-CONFIG_ARCH_R8A7745=y
-CONFIG_ARCH_R8A77470=y
-CONFIG_ARCH_R8A7778=y
-CONFIG_ARCH_R8A7779=y
-CONFIG_ARCH_R8A7790=y
-CONFIG_ARCH_R8A7791=y
-CONFIG_ARCH_R8A7792=y
-CONFIG_ARCH_R8A7793=y
-CONFIG_ARCH_R8A7794=y
 CONFIG_ARCH_R9A06G032=y
 CONFIG_ARCH_SH73A0=y
+CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
@@ -1042,6 +1124,7 @@ CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=m
 CONFIG_EXTCON_MAX14577=m
 CONFIG_EXTCON_MAX77693=m
 CONFIG_EXTCON_MAX8997=m
+CONFIG_EXTCON_USB_GPIO=y
 CONFIG_TI_AEMIF=y
 CONFIG_STM32_FMC2_EBI=y
 CONFIG_EXYNOS5422_DMC=m
@@ -1053,12 +1136,13 @@ CONFIG_AT91_SAMA5D2_ADC=m
 CONFIG_BERLIN2_ADC=m
 CONFIG_CPCAP_ADC=m
 CONFIG_EXYNOS_ADC=m
-CONFIG_STMPE_ADC=m
 CONFIG_MESON_SARADC=m
+CONFIG_QCOM_SPMI_VADC=m
 CONFIG_ROCKCHIP_SARADC=m
 CONFIG_STM32_ADC_CORE=m
 CONFIG_STM32_ADC=m
 CONFIG_STM32_DFSDM_ADC=m
+CONFIG_STMPE_ADC=m
 CONFIG_VF610_ADC=m
 CONFIG_XILINX_XADC=y
 CONFIG_IIO_CROS_EC_SENSORS_CORE=m
@@ -1091,14 +1175,18 @@ CONFIG_PWM_SUN4I=y
 CONFIG_PWM_TEGRA=y
 CONFIG_PWM_VT8500=y
 CONFIG_KEYSTONE_IRQ=y
+CONFIG_RESET_MCHP_SPARX5=y
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_SUN9I_USB=y
+CONFIG_PHY_BRCM_USB=m
 CONFIG_PHY_HIX5HD2_SATA=y
 CONFIG_PHY_BERLIN_SATA=y
 CONFIG_PHY_BERLIN_USB=y
 CONFIG_PHY_MMP3_USB=m
+CONFIG_PHY_LAN966X_SERDES=m
 CONFIG_PHY_CPCAP_USB=m
 CONFIG_PHY_QCOM_APQ8064_SATA=m
+CONFIG_PHY_QCOM_USB_HS=y
 CONFIG_PHY_RCAR_GEN2=m
 CONFIG_PHY_ROCKCHIP_DP=m
 CONFIG_PHY_ROCKCHIP_USB=y
@@ -1114,12 +1202,15 @@ CONFIG_PHY_DM816X_USB=m
 CONFIG_OMAP_USB2=y
 CONFIG_TI_PIPE3=y
 CONFIG_TWL4030_USB=m
+CONFIG_RAS=y
 CONFIG_NVMEM_IMX_OCOTP=y
-CONFIG_ROCKCHIP_EFUSE=m
+CONFIG_NVMEM_MESON_MX_EFUSE=m
+CONFIG_NVMEM_QCOM_QFPROM=y
+CONFIG_NVMEM_RMEM=m
+CONFIG_NVMEM_ROCKCHIP_EFUSE=m
+CONFIG_NVMEM_STM32_ROMEM=m
 CONFIG_NVMEM_SUNXI_SID=y
 CONFIG_NVMEM_VF610_OCOTP=y
-CONFIG_MESON_MX_EFUSE=m
-CONFIG_NVMEM_RMEM=m
 CONFIG_FSI=m
 CONFIG_FSI_MASTER_GPIO=m
 CONFIG_FSI_MASTER_HUB=m
@@ -1127,6 +1218,10 @@ CONFIG_FSI_MASTER_ASPEED=m
 CONFIG_FSI_SCOM=m
 CONFIG_FSI_SBEFIFO=m
 CONFIG_FSI_OCC=m
+CONFIG_TEE=y
+CONFIG_OPTEE=y
+CONFIG_INTERCONNECT_QCOM=y
+CONFIG_INTERCONNECT_QCOM_MSM8916=y
 CONFIG_COUNTER=m
 CONFIG_STM32_TIMER_CNT=m
 CONFIG_STM32_LPTIMER_CNT=m
@@ -1158,14 +1253,26 @@ CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
+CONFIG_CRYPTO_GHASH_ARM_CE=m
+CONFIG_CRYPTO_SHA1_ARM_NEON=m
+CONFIG_CRYPTO_SHA1_ARM_CE=m
+CONFIG_CRYPTO_SHA2_ARM_CE=m
+CONFIG_CRYPTO_SHA512_ARM=m
+CONFIG_CRYPTO_AES_ARM=m
+CONFIG_CRYPTO_AES_ARM_BS=m
+CONFIG_CRYPTO_AES_ARM_CE=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
+CONFIG_CRYPTO_CRC32_ARM_CE=m
 CONFIG_CRYPTO_DEV_SUN4I_SS=m
 CONFIG_CRYPTO_DEV_FSL_CAAM=m
-CONFIG_CRYPTO_DEV_MARVELL_CESA=m
 CONFIG_CRYPTO_DEV_EXYNOS_RNG=m
 CONFIG_CRYPTO_DEV_S5P=m
 CONFIG_CRYPTO_DEV_ATMEL_AES=m
 CONFIG_CRYPTO_DEV_ATMEL_TDES=m
 CONFIG_CRYPTO_DEV_ATMEL_SHA=m
+CONFIG_CRYPTO_DEV_MARVELL_CESA=m
+CONFIG_CRYPTO_DEV_QCE=m
+CONFIG_CRYPTO_DEV_QCOM_RNG=m
 CONFIG_CRYPTO_DEV_ROCKCHIP=m
 CONFIG_CRYPTO_DEV_STM32_CRC=m
 CONFIG_CRYPTO_DEV_STM32_HASH=m
@@ -1174,6 +1281,3 @@ CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_CHROME_PLATFORMS=y
-CONFIG_CROS_EC=m
-CONFIG_CROS_EC_CHARDEV=m
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index cd703c15798f..4ed6e8c8e164 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -1,30 +1,26 @@
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_SLUB_DEBUG is not set
 CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V6 is not set
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MV78XX0=y
-CONFIG_MACH_DB78X00_BP=y
-CONFIG_MACH_RD78X00_MASA=y
 CONFIG_MACH_TERASTATION_WXL=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_FPE_NWFPE=y
 CONFIG_VFP=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -52,25 +48,26 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
 CONFIG_CHR_DEV_SG=m
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_MARVELL_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_NET_PCI=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_MARVELL_PHY=y
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -110,21 +107,20 @@ CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_SLUB_DEBUG is not set
 CONFIG_SCHEDSTATS=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig
index 4f16716bfc32..2467afd32146 100644
--- a/arch/arm/configs/mvebu_v5_defconfig
+++ b/arch/arm/configs/mvebu_v5_defconfig
@@ -1,19 +1,14 @@
 CONFIG_SYSVIPC=y
 CONFIG_FHANDLE=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=19
 CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_KIRKWOOD=y
 CONFIG_ARCH_ORION5X=y
-CONFIG_MACH_DB88F5281=y
-CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_RD88F5182_DT=y
 CONFIG_MACH_KUROBOX_PRO=y
 CONFIG_MACH_DNS323=y
@@ -22,24 +17,14 @@ CONFIG_MACH_TERASTATION_PRO2=y
 CONFIG_MACH_LINKSTATION_PRO=y
 CONFIG_MACH_LINKSTATION_LSCHL=y
 CONFIG_MACH_LINKSTATION_MINI=y
-CONFIG_MACH_LINKSTATION_LS_HGL=y
 CONFIG_MACH_TS409=y
-CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
 CONFIG_MACH_D2NET_DT=y
 CONFIG_MACH_NET2BIG=y
 CONFIG_MACH_MSS2_DT=y
-CONFIG_MACH_WNR854T=y
-CONFIG_MACH_RD88F5181L_GE=y
-CONFIG_MACH_RD88F5181L_FXO=y
-CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CPU_FREQ=y
@@ -47,6 +32,9 @@ CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_KIRKWOOD_CPUIDLE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -61,6 +49,7 @@ CONFIG_NET_SWITCHDEV=y
 CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
+CONFIG_PCI_MVEBU=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
@@ -84,6 +73,7 @@ CONFIG_EEPROM_AT24=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
 CONFIG_CHR_DEV_SG=m
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
@@ -93,14 +83,13 @@ CONFIG_NET_DSA_MV88E6XXX=y
 CONFIG_MV643XX_ETH=y
 CONFIG_R8169=y
 CONFIG_MARVELL_PHY=y
-CONFIG_MWL8K=m
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_SDIO=y
+CONFIG_MWL8K=m
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
@@ -195,16 +184,16 @@ CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
 CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_DEV_MARVELL_CESA=y
+CONFIG_CRC_CCITT=y
+CONFIG_LIBCRC32C=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig
index cddce57fe4b9..68a18264f31b 100644
--- a/arch/arm/configs/mvebu_v7_defconfig
+++ b/arch/arm/configs/mvebu_v7_defconfig
@@ -4,9 +4,6 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_375=y
@@ -14,13 +11,8 @@ CONFIG_MACH_ARMADA_38X=y
 CONFIG_MACH_ARMADA_39X=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_MACH_DOVE=y
-CONFIG_PCI=y
-CONFIG_PCI_MVEBU=y
 CONFIG_SMP=y
 CONFIG_HIGHMEM=y
-# CONFIG_COMPACTION is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CPU_FREQ=y
@@ -29,6 +21,10 @@ CONFIG_CPU_IDLE=y
 CONFIG_ARM_MVEBU_V7_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_SLAB=y
+# CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -40,6 +36,8 @@ CONFIG_BT=y
 CONFIG_BT_MRVL=y
 CONFIG_BT_MRVL_SDIO=y
 CONFIG_CFG80211=y
+CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
@@ -49,8 +47,8 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_M25P80=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_SPI_NOR=y
@@ -146,10 +144,10 @@ CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
 CONFIG_NLS_UTF8=y
+CONFIG_CRYPTO_DEV_MARVELL_CESA=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index ca32446b187f..feb38a94c1a7 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_TASKSTATS=y
@@ -15,7 +15,6 @@ CONFIG_CGROUPS=y
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MXS=y
 CONFIG_AEABI=y
@@ -25,6 +24,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_BLK_DEV_INTEGRITY=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -38,7 +38,6 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_CAN=m
-CONFIG_CAN_FLEXCAN=m
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -62,6 +61,7 @@ CONFIG_ICPLUS_PHY=y
 CONFIG_MICREL_PHY=y
 CONFIG_REALTEK_PHY=y
 CONFIG_SMSC_PHY=y
+CONFIG_CAN_FLEXCAN=m
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC95XX=y
 # CONFIG_WLAN is not set
@@ -93,6 +93,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
 CONFIG_DRM_MXSFB=y
+CONFIG_FB=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
@@ -162,10 +163,10 @@ CONFIG_CRC_ITU_T=m
 CONFIG_CRC7=m
 CONFIG_FONTS=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_PROVE_LOCKING=y
 CONFIG_BLK_DEV_IO_TRACE=y
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index 018a1092d0e7..c333406ce5e3 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -1,31 +1,32 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_ASSABET=y
 CONFIG_ASSABET_NEPONSET=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PCMCIA_SA1111=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
 CONFIG_ZBOOT_ROM_TEXT=0x80000
 CONFIG_ZBOOT_ROM_BSS=0xc1000000
 CONFIG_ZBOOT_ROM=y
 CONFIG_CMDLINE="console=ttySA0,38400n8 cpufreq=221200 rw root=/dev/mtdblock2 mtdparts=sa1100:512K(boot),1M(kernel),2560K(initrd),4M(root) load_ramdisk=1 prompt_ramdisk=0 mem=32M noinitrd initrd=0xc0800000,3M"
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
 CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_MSDOS_PARTITION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_SA1100=y
+CONFIG_PCMCIA_SA1111=y
 CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
@@ -39,20 +40,20 @@ CONFIG_BLK_DEV_SD=m
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_NET_VENDOR_SMC=y
+CONFIG_PCMCIA_PCNET=y
 CONFIG_SMC9194=y
 CONFIG_SMC91X=y
 CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_SERIO_SERPORT=m
 CONFIG_SERIO_SA1111=y
-CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CS=y
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=64
+CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_WATCHDOG=y
@@ -68,17 +69,19 @@ CONFIG_USB=m
 CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_STORAGE=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_EXT2_FS=y
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_ISO8859_1=m
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig
index 2e3b20ef0db1..30ff6fbce5a3 100644
--- a/arch/arm/configs/netwinder_defconfig
+++ b/arch/arm/configs/netwinder_defconfig
@@ -1,15 +1,13 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_FOOTBRIDGE=y
 CONFIG_ARCH_NETWINDER=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
 CONFIG_DEPRECATED_PARAM_STRUCT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=0x801"
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -51,9 +49,6 @@ CONFIG_977_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FB_CYBER2000=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SOUND_PRIME=y
@@ -62,6 +57,10 @@ CONFIG_SOUND_TRACEINIT=y
 CONFIG_SOUND_DMAP=y
 CONFIG_SOUND_YM3812=y
 CONFIG_SOUND_WAVEARTIST=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_EXT2_FS=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
@@ -71,9 +70,7 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_SMB_FS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_CODEPAGE_852=y
@@ -81,6 +78,9 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
 CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 3f35761dc9ff..4171dafddc0a 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -10,16 +9,14 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_NOMADIK=y
 CONFIG_MACH_NOMADIK_8815NHK=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -52,15 +49,16 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_FSMC=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
@@ -97,6 +95,7 @@ CONFIG_REGULATOR=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_TPO_TPG110=y
 CONFIG_DRM_PL111=y
+CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -128,17 +127,15 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_ROOT_NFS=y
 CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=y
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_DES=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 3148567b66b6..53dd0717cea5 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -1,61 +1,48 @@
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_SHMEM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLOB=y
+# CONFIG_KALLSYMS is not set
 CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_OMAP=y
 CONFIG_ARCH_OMAP1=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP730=y
-CONFIG_ARCH_OMAP850=y
 CONFIG_ARCH_OMAP16XX=y
-CONFIG_MACH_OMAP_INNOVATOR=y
-CONFIG_MACH_OMAP_H2=y
-CONFIG_MACH_OMAP_H3=y
-CONFIG_MACH_HERALD=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_MACH_OMAP_OSK=y
-CONFIG_MACH_OMAP_PERSEUS2=y
-CONFIG_MACH_OMAP_FSAMPLE=y
-CONFIG_MACH_VOICEBLUE=y
 CONFIG_MACH_OMAP_PALMTE=y
-CONFIG_MACH_OMAP_PALMZ71=y
-CONFIG_MACH_OMAP_PALMTT=y
 CONFIG_MACH_SX1=y
 CONFIG_MACH_NOKIA770=y
 CONFIG_MACH_AMS_DELTA=y
 CONFIG_MACH_OMAP_GENERIC=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_OMAP_CF=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 rootfstype=jffs2"
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
 # CONFIG_SUSPEND is not set
+CONFIG_PM=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_SWAP is not set
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
+# CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -76,6 +63,8 @@ CONFIG_BT_RFCOMM=y
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=y
 CONFIG_BT_HIDP=y
+CONFIG_PCCARD=y
+CONFIG_OMAP_CF=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_CONNECTOR=y
@@ -96,12 +85,21 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=m
 CONFIG_PATA_PCMCIA=m
 CONFIG_NETDEVICES=y
 CONFIG_TUN=y
 CONFIG_PHYLIB=y
 CONFIG_SMC91X=y
+CONFIG_PPP=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_ASYNC=y
+CONFIG_SLIP=y
+CONFIG_SLIP_COMPRESSED=y
 CONFIG_USB_CATC=y
 CONFIG_USB_KAWETH=y
 CONFIG_USB_PEGASUS=y
@@ -109,14 +107,6 @@ CONFIG_USB_RTL8150=y
 CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_AX8817X is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_SLIP=y
-CONFIG_SLIP_COMPRESSED=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
@@ -127,11 +117,11 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=y
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=3
 CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -153,11 +143,6 @@ CONFIG_FB_OMAP_LCD_MIPID=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_6x11=y
-CONFIG_FONT_MINI_4x6=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
@@ -219,7 +204,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_CODEPAGE_852=y
@@ -232,13 +216,7 @@ CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_KOI8_R=y
 CONFIG_NLS_UTF8=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_PCBC=y
@@ -246,3 +224,14 @@ CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_LIBCRC32C=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_6x11=y
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index f250bf1cc022..c4216c552100 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -2,7 +2,7 @@ CONFIG_KERNEL_LZMA=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
@@ -22,11 +22,8 @@ CONFIG_CGROUP_PERF=y
 CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
-CONFIG_SLAB=y
 CONFIG_PROFILING=y
 CONFIG_ARCH_MULTI_V6=y
-CONFIG_POWER_AVS_OMAP=y
-CONFIG_POWER_AVS_OMAP_CLASS3=y
 CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_ARCH_OMAP2=y
 CONFIG_ARCH_OMAP3=y
@@ -35,6 +32,8 @@ CONFIG_SOC_OMAP5=y
 CONFIG_SOC_AM33XX=y
 CONFIG_SOC_AM43XX=y
 CONFIG_SOC_DRA7XX=y
+CONFIG_POWER_AVS_OMAP=y
+CONFIG_POWER_AVS_OMAP_CLASS3=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_ERRATA_411920=y
 CONFIG_SMP=y
@@ -54,14 +53,6 @@ CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_KERNEL_MODE_NEON=y
 CONFIG_PM_DEBUG=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=m
-CONFIG_CRYPTO_SHA256_ARM=m
-CONFIG_CRYPTO_SHA512_ARM=m
-CONFIG_CRYPTO_AES_ARM=m
-CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRYPTO_GHASH_ARM_CE=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
@@ -69,9 +60,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
+CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_ZSMALLOC=m
 CONFIG_NET=y
@@ -87,6 +78,155 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_LOG_NETDEV=m
+CONFIG_NF_CONNTRACK_ZONES=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NF_CT_NETLINK_HELPER=m
+CONFIG_NETFILTER_NETLINK_GLUE_CT=y
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=y
+CONFIG_NF_TABLES_NETDEV=y
+CONFIG_NFT_NUMGEN=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_CONNLIMIT=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_MASQ=m
+CONFIG_NFT_REDIR=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_TUNNEL=m
+CONFIG_NFT_OBJREF=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_QUOTA=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_FIB_INET=m
+CONFIG_NFT_XFRM=m
+CONFIG_NFT_SOCKET=m
+CONFIG_NFT_OSF=m
+CONFIG_NFT_TPROXY=m
+CONFIG_NFT_SYNPROXY=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
+CONFIG_NFT_FIB_NETDEV=m
+CONFIG_NFT_REJECT_NETDEV=m
+CONFIG_NF_FLOW_TABLE_INET=m
+CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CT=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CGROUP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_L2TP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NFT_DUP_IPV4=m
+CONFIG_NFT_FIB_IPV4=m
+CONFIG_NF_FLOW_TABLE_IPV4=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
+CONFIG_NFT_DUP_IPV6=m
+CONFIG_NFT_FIB_IPV6=m
+CONFIG_NF_FLOW_TABLE_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_SRH=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_NFT_BRIDGE_META=m
+CONFIG_NFT_BRIDGE_REJECT=m
+CONFIG_NF_LOG_BRIDGE=m
 CONFIG_BRIDGE=m
 CONFIG_BRIDGE_VLAN_FILTERING=y
 CONFIG_VLAN_8021Q=m
@@ -101,8 +241,6 @@ CONFIG_NET_ACT_POLICE=m
 CONFIG_NET_ACT_GACT=m
 CONFIG_NET_SWITCHDEV=y
 CONFIG_CAN=m
-CONFIG_CAN_C_CAN=m
-CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_BT=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
@@ -127,6 +265,7 @@ CONFIG_BT_MRVL_SDIO=m
 CONFIG_AF_RXRPC=m
 CONFIG_RXKAD=y
 CONFIG_CFG80211=m
+CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=m
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
@@ -137,7 +276,6 @@ CONFIG_PCI_EPF_TEST=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_OMAP_OCP2SCP=y
-CONFIG_SIMPLE_PM_BUS=y
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
@@ -165,7 +303,9 @@ CONFIG_SENSORS_TSL2550=m
 CONFIG_SRAM=y
 CONFIG_PCI_ENDPOINT_TEST=m
 CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_AT25=m
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI_PLATFORM=y
@@ -200,6 +340,8 @@ CONFIG_AT803X_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_DP83848_PHY=y
 CONFIG_DP83867_PHY=y
+CONFIG_CAN_C_CAN=m
+CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_DEFLATE=m
@@ -225,6 +367,8 @@ CONFIG_LIBERTAS_DEBUG=y
 CONFIG_MWIFIEX=m
 CONFIG_MWIFIEX_SDIO=m
 CONFIG_MWIFIEX_USB=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SPI=m
 CONFIG_WL12XX=m
 CONFIG_WL18XX=m
 CONFIG_WLCORE_SPI=m
@@ -267,8 +411,6 @@ CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_8250_OMAP=y
 CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_OMAP=y
-CONFIG_SERIAL_OMAP_CONSOLE=y
 CONFIG_SERIAL_DEV_BUS=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_SPI=y
@@ -278,7 +420,6 @@ CONFIG_SPI_TI_QSPI=m
 CONFIG_HSI=m
 CONFIG_OMAP_SSI=m
 CONFIG_SSI_PROTOCOL=m
-CONFIG_PTP_1588_CLOCK=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
@@ -342,15 +483,15 @@ CONFIG_REGULATOR_TWL4030=y
 CONFIG_RC_CORE=m
 CONFIG_LIRC=y
 CONFIG_RC_DEVICES=y
-CONFIG_IR_SPI=m
-CONFIG_IR_RX51=m
 CONFIG_IR_GPIO_TX=m
 CONFIG_IR_PWM_TX=m
+CONFIG_IR_RX51=m
+CONFIG_IR_SPI=m
 CONFIG_MEDIA_SUPPORT=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_OMAP3=m
-CONFIG_VIDEO_TVP5150=m
 CONFIG_VIDEO_MT9P031=m
+CONFIG_VIDEO_TVP5150=m
 CONFIG_DRM=m
 CONFIG_DRM_OMAP=m
 CONFIG_OMAP5_DSS_HDMI=y
@@ -359,6 +500,7 @@ CONFIG_OMAP2_DSS_DSI=y
 CONFIG_DRM_TILCDC=m
 CONFIG_DRM_PANEL_DSI_CM=m
 CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_PANEL_EDP=m
 CONFIG_DRM_PANEL_LG_LB035Q02=m
 CONFIG_DRM_PANEL_NEC_NL8048HL11=m
 CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m
@@ -400,6 +542,8 @@ CONFIG_SND_SOC_OMAP_ABE_TWL6040=m
 CONFIG_SND_SOC_OMAP_HDMI=m
 CONFIG_SND_SOC_CPCAP=m
 CONFIG_SND_SOC_TLV320AIC23_I2C=m
+CONFIG_SND_SOC_TLV320AIC3X=m
+CONFIG_SND_SOC_TLV320AIC3X_I2C=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
 CONFIG_HID_GENERIC=m
@@ -423,6 +567,7 @@ CONFIG_USB_INVENTRA_DMA=y
 CONFIG_USB_TI_CPPI41_DMA=y
 CONFIG_USB_TUSB_OMAP_DMA=y
 CONFIG_USB_DWC3=m
+CONFIG_USB_ISP1760=m
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_SIMPLE=m
@@ -468,6 +613,8 @@ CONFIG_LEDS_CLASS=m
 CONFIG_LEDS_CPCAP=m
 CONFIG_LEDS_LM3532=m
 CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP55XX_COMMON=m
+CONFIG_LEDS_LP5523=m
 CONFIG_LEDS_PCA963X=m
 CONFIG_LEDS_PWM=m
 CONFIG_LEDS_TRIGGERS=y
@@ -553,6 +700,13 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_GHASH_ARM_CE=m
+CONFIG_CRYPTO_SHA1_ARM_NEON=m
+CONFIG_CRYPTO_SHA256_ARM=m
+CONFIG_CRYPTO_SHA512_ARM=m
+CONFIG_CRYPTO_AES_ARM=m
+CONFIG_CRYPTO_AES_ARM_BS=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_CRYPTO_DEV_OMAP=m
 CONFIG_CRYPTO_DEV_OMAP_SHAM=m
 CONFIG_CRYPTO_DEV_OMAP_AES=m
@@ -568,9 +722,8 @@ CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_PRINTK_TIME=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_SPLIT=y
 CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_DEBUG_INFO_SPLIT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_SCHEDSTATS=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index b9e3b647e732..0629b088a584 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,23 +1,14 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EXPERT=y
-# CONFIG_SLUB_DEBUG is not set
 CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V6 is not set
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_ORION5X=y
-CONFIG_ARCH_ORION5X_DT=y
-CONFIG_MACH_DB88F5281=y
-CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_RD88F5182_DT=y
 CONFIG_MACH_KUROBOX_PRO=y
 CONFIG_MACH_DNS323=y
@@ -25,28 +16,20 @@ CONFIG_MACH_TS209=y
 CONFIG_MACH_TERASTATION_PRO2=y
 CONFIG_MACH_LINKSTATION_PRO=y
 CONFIG_MACH_LINKSTATION_MINI=y
-CONFIG_MACH_LINKSTATION_LS_HGL=y
 CONFIG_MACH_TS409=y
-CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
 CONFIG_MACH_MV2120=y
-CONFIG_MACH_EDMINI_V2_DT=y
-CONFIG_MACH_D2NET=y
-CONFIG_MACH_BIGDISK=y
 CONFIG_MACH_NET2BIG=y
-CONFIG_MACH_MSS2=y
-CONFIG_MACH_WNR854T=y
-CONFIG_MACH_RD88F5181L_GE=y
-CONFIG_MACH_RD88F5181L_FXO=y
-CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_FPE_NWFPE=y
 CONFIG_VFP=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -58,6 +41,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 CONFIG_NET_DSA=y
 CONFIG_NET_PKTGEN=m
+# CONFIG_VGA_ARB is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -69,13 +53,14 @@ CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_NAND_ORION=y
+CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
 CONFIG_CHR_DEV_SG=m
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
@@ -103,7 +88,6 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_SENSORS_LM75=y
-# CONFIG_VGA_ARB is not set
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
@@ -148,17 +132,18 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_DEV_MARVELL_CESA=y
+CONFIG_CRC_T10DIF=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
+# CONFIG_SLUB_DEBUG is not set
 CONFIG_LATENCYTOP=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRC_T10DIF=y
diff --git a/arch/arm/configs/oxnas_v6_defconfig b/arch/arm/configs/oxnas_v6_defconfig
deleted file mode 100644
index cae0db6b4eaf..000000000000
--- a/arch/arm/configs/oxnas_v6_defconfig
+++ /dev/null
@@ -1,93 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CGROUPS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_STRICT_KERNEL_RWX=y
-CONFIG_STRICT_MODULE_RWX=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_CMDLINE_PARTITION=y
-CONFIG_ARCH_MULTI_V6=y
-CONFIG_ARCH_OXNAS=y
-CONFIG_MACH_OX820=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=16
-CONFIG_CMA=y
-CONFIG_FORCE_MAX_ZONEORDER=12
-CONFIG_SECCOMP=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_KEXEC=y
-CONFIG_EFI=y
-CONFIG_CPU_IDLE=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_VFP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=64
-CONFIG_SIMPLE_PM_BUS=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_OXNAS=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_NETDEVICES=y
-CONFIG_STMMAC_ETH=y
-CONFIG_REALTEK_PHY=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_CLASS_FLASH=m
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_EXT4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_UBIFS_FS=y
-CONFIG_PSTORE=y
-CONFIG_PSTORE_CONSOLE=y
-CONFIG_PSTORE_PMSG=y
-CONFIG_PSTORE_RAM=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
deleted file mode 100644
index b47c8abe85bc..000000000000
--- a/arch/arm/configs/palmz72_defconfig
+++ /dev/null
@@ -1,75 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_PXA_PALM=y
-# CONFIG_MACH_PALMTX is not set
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PDA_POWER=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_PXA=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=866
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_TMPFS=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_USER=y
-CONFIG_CRC_T10DIF=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
deleted file mode 100644
index e97a158081fc..000000000000
--- a/arch/arm/configs/pcm027_defconfig
+++ /dev/null
@@ -1,90 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_PCM027=y
-CONFIG_MACH_PCM990_BASEBOARD=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_BLK_DEV is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PXA2XX_AC97=y
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=m
-CONFIG_RTC_DRV_PXA=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_DEFAULT="iso8859-15"
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig
deleted file mode 100644
index 2170148b975c..000000000000
--- a/arch/arm/configs/pleb_defconfig
+++ /dev/null
@@ -1,52 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_SHMEM is not set
-CONFIG_MODULES=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_PLEB=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M"
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NLS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index 0947f022954d..8422ddc9bab2 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -1,23 +1,18 @@
 CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MMP=y
-CONFIG_MACH_ASPENITE=y
-CONFIG_MACH_ZYLONITE2=y
-CONFIG_MACH_AVENGERS_LITE=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_ARCH_MMP=y
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -34,9 +29,9 @@ CONFIG_SMC91X=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 # CONFIG_VGA_CONSOLE is not set
@@ -49,12 +44,12 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
+CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig
deleted file mode 100644
index 4a383afa5e87..000000000000
--- a/arch/arm/configs/pxa255-idp_defconfig
+++ /dev/null
@@ -1,54 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_PXA_IDP=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
index f0c34017f2aa..d1e83b52e03a 100644
--- a/arch/arm/configs/pxa3xx_defconfig
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -1,21 +1,18 @@
 CONFIG_SYSVIPC=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_KALLSYMS_ALL=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
-CONFIG_MACH_LITTLETON=y
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_SAAR=y
-CONFIG_PREEMPT=y
+CONFIG_MACH_PXA3XX_DT=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
 CONFIG_FPE_NWFPE=y
+CONFIG_MODULES=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -30,11 +27,11 @@ CONFIG_IP_PNP=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_MARVELL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
@@ -44,12 +41,10 @@ CONFIG_SMC91X=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_PXA27x=y
-CONFIG_KEYBOARD_PXA930_ROTARY=y
-CONFIG_MOUSE_PXA930_TRKBALL=y
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_I2C_HELPER_AUTO is not set
@@ -60,7 +55,6 @@ CONFIG_GPIO_MAX732X=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_MAX7301=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_SUPPLY_DEBUG=y
 CONFIG_PDA_POWER=y
 CONFIG_BATTERY_DA9030=y
@@ -78,8 +72,6 @@ CONFIG_BACKLIGHT_DA903X=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_6x11=y
 CONFIG_LOGO=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
@@ -105,9 +97,11 @@ CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS=y
+CONFIG_FONTS=y
+CONFIG_FONT_6x11=y
 CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
 # CONFIG_SCHED_DEBUG is not set
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
index b21196372158..48e41ca582af 100644
--- a/arch/arm/configs/pxa910_defconfig
+++ b/arch/arm/configs/pxa910_defconfig
@@ -1,23 +1,19 @@
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
+CONFIG_ARCH_MMP=y
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk"
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MMP=y
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_TTC_DKB=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk"
 CONFIG_FPE_NWFPE=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -34,9 +30,12 @@ CONFIG_SMC91X=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
 CONFIG_SPI=y
+# CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_MMP_DISP=y
 CONFIG_MMP_DISP_CONTROLLER=y
@@ -44,9 +43,6 @@ CONFIG_MMP_SPI=y
 CONFIG_MMP_PANEL_TPOHVGA=y
 CONFIG_MMP_FB=y
 CONFIG_LOGO=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_TMPFS=y
@@ -57,14 +53,14 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
+CONFIG_CRC_CCITT=y
 CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_MMP_UART2=y
 CONFIG_EARLY_PRINTK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index bd7dd81c9c54..b46e39369dbb 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -1,8 +1,9 @@
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_FHANDLE=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_IKCONFIG=y
@@ -11,82 +12,15 @@ CONFIG_LOG_BUF_SHIFT=13
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
-CONFIG_SLOB=y
 CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_LDM_PARTITION=y
-CONFIG_CMDLINE_PARTITION=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
-CONFIG_ARCH_LUBBOCK=y
-CONFIG_MACH_MAINSTONE=y
-CONFIG_MACH_ZYLONITE300=y
-CONFIG_MACH_ZYLONITE320=y
-CONFIG_MACH_LITTLETON=y
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_SAAR=y
-CONFIG_ARCH_PXA_IDP=y
-CONFIG_ARCH_VIPER=y
-CONFIG_MACH_ARCOM_ZEUS=y
-CONFIG_MACH_BALLOON3=y
-CONFIG_MACH_CSB726=y
-CONFIG_CSB726_CSB701=y
-CONFIG_MACH_EXEDA=y
-CONFIG_MACH_CM_X300=y
-CONFIG_MACH_CAPC7117=y
 CONFIG_ARCH_GUMSTIX=y
-CONFIG_MACH_INTELMOTE2=y
-CONFIG_MACH_STARGATE2=y
-CONFIG_MACH_XCEP=y
-CONFIG_TRIZEPS_PXA=y
-CONFIG_MACH_TRIZEPS4WL=y
-CONFIG_MACH_LOGICPD_PXA270=y
-CONFIG_MACH_PCM027=y
-CONFIG_MACH_PCM990_BASEBOARD=y
-CONFIG_MACH_COLIBRI=y
-CONFIG_MACH_COLIBRI_PXA270_INCOME=y
-CONFIG_MACH_COLIBRI300=y
-CONFIG_MACH_COLIBRI320=y
-CONFIG_MACH_COLIBRI_EVALBOARD=y
-CONFIG_MACH_VPAC270=y
-CONFIG_MACH_H4700=y
-CONFIG_MACH_H5000=y
-CONFIG_MACH_HIMALAYA=y
-CONFIG_MACH_MAGICIAN=y
-CONFIG_MACH_MIOA701=y
-CONFIG_PXA_EZX=y
-CONFIG_MACH_MP900C=y
-CONFIG_ARCH_PXA_PALM=y
 CONFIG_PXA_SHARPSL=y
-CONFIG_MACH_POODLE=y
-CONFIG_MACH_CORGI=y
-CONFIG_MACH_SHEPHERD=y
-CONFIG_MACH_HUSKY=y
 CONFIG_MACH_AKITA=y
 CONFIG_MACH_BORZOI=y
-CONFIG_MACH_TOSA=y
-CONFIG_TOSA_BT=m
-CONFIG_TOSA_USE_EXT_KEYCODES=y
-CONFIG_MACH_ICONTROL=y
-CONFIG_ARCH_PXA_ESERIES=y
-CONFIG_MACH_ZIPIT2=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCCARD=m
-CONFIG_YENTA=m
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-# CONFIG_COMPACTION is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARCH_FORCE_MAX_ORDER=8
 CONFIG_CMDLINE="root=/dev/ram0 ro"
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
@@ -99,7 +33,20 @@ CONFIG_CPUFREQ_DT=m
 CONFIG_ARM_PXA2xx_CPUFREQ=m
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_LDM_PARTITION=y
+CONFIG_CMDLINE_PARTITION=y
 CONFIG_BINFMT_MISC=y
+CONFIG_SLUB=y
+CONFIG_SLUB_TINY=y
+# CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -117,16 +64,6 @@ CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
 CONFIG_IEEE802154=y
 CONFIG_DNS_RESOLVER=y
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-CONFIG_IRTTY_SIR=m
-CONFIG_PXA_FICP=m
 CONFIG_BT=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
@@ -153,51 +90,60 @@ CONFIG_MAC80211=m
 CONFIG_RFKILL=y
 CONFIG_RFKILL_INPUT=y
 CONFIG_RFKILL_GPIO=m
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_PCCARD=m
+CONFIG_YENTA=m
+CONFIG_PCMCIA_PXA2XX=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_AR7_PARTS=m
+CONFIG_MTD_CMDLINE_PARTS=m
+CONFIG_MTD_OF_PARTS=m
+CONFIG_MTD_AFS_PARTS=m
 CONFIG_MTD_REDBOOT_PARTS=m
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_CMDLINE_PARTS=m
-CONFIG_MTD_AFS_PARTS=m
-CONFIG_MTD_OF_PARTS=m
-CONFIG_MTD_AR7_PARTS=m
 CONFIG_MTD_BLOCK=m
 CONFIG_NFTL=m
 CONFIG_NFTL_RW=y
+CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=m
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_LE_BYTE_SWAP=y
 CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=m
 CONFIG_MTD_CFI_STAA=m
 CONFIG_MTD_RAM=m
 CONFIG_MTD_ROM=m
 CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PXA2XX=m
 CONFIG_MTD_M25P80=m
 CONFIG_MTD_BLOCK2MTD=y
 CONFIG_MTD_DOCG3=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
 CONFIG_MTD_RAW_NAND=m
-CONFIG_MTD_NAND_ECC_SW_BCH=y
+CONFIG_MTD_NAND_SHARPSL=m
+CONFIG_MTD_NAND_TMIO=m
+CONFIG_MTD_NAND_BRCMNAND=m
 CONFIG_MTD_NAND_GPIO=m
+CONFIG_MTD_NAND_PLATFORM=m
 CONFIG_MTD_NAND_DISKONCHIP=m
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_NAND_SHARPSL=m
-CONFIG_MTD_NAND_MARVELL=m
 CONFIG_MTD_NAND_CM_X270=m
-CONFIG_MTD_NAND_TMIO=m
-CONFIG_MTD_NAND_BRCMNAND=m
-CONFIG_MTD_NAND_PLATFORM=m
-CONFIG_MTD_ONENAND=m
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_NAND_ECC_SW_BCH=y
 CONFIG_MTD_SPI_NOR=m
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_BLOCK=y
@@ -211,12 +157,8 @@ CONFIG_AD525X_DPOT_I2C=m
 CONFIG_ICS932S401=m
 CONFIG_APDS9802ALS=m
 CONFIG_ISL29003=m
-CONFIG_IIO=m
-CONFIG_AD5446=m
 CONFIG_EEPROM_AT24=m
 CONFIG_SENSORS_LIS3_SPI=m
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDECS=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
@@ -245,13 +187,13 @@ CONFIG_SMC91X=m
 CONFIG_SMSC911X=m
 CONFIG_STMMAC_ETH=m
 CONFIG_PHYLIB=y
-CONFIG_AT803X_PHY=m
-CONFIG_MARVELL_PHY=m
 CONFIG_SMSC_PHY=m
 CONFIG_BROADCOM_PHY=y
 CONFIG_ICPLUS_PHY=m
 CONFIG_MICREL_PHY=m
 CONFIG_FIXED_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_AT803X_PHY=m
 CONFIG_MDIO_BITBANG=y
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
@@ -275,18 +217,17 @@ CONFIG_HOSTAP=m
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 CONFIG_HOSTAP_CS=m
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_SDIO=m
 CONFIG_HERMES=m
 CONFIG_PCMCIA_HERMES=m
 CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
 CONFIG_RT2X00=m
 CONFIG_RT73USB=m
 CONFIG_RT2800USB=m
-CONFIG_MWIFIEX=m
-CONFIG_MWIFIEX_SDIO=m
 CONFIG_INPUT_FF_MEMLESS=m
-CONFIG_INPUT_POLLDEV=y
 CONFIG_INPUT_MATRIXKMAP=y
 CONFIG_INPUT_MOUSEDEV=m
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
@@ -298,14 +239,12 @@ CONFIG_KEYBOARD_ATKBD=m
 CONFIG_KEYBOARD_QT1070=m
 CONFIG_KEYBOARD_GPIO=m
 CONFIG_KEYBOARD_PXA27x=m
-CONFIG_KEYBOARD_PXA930_ROTARY=m
 CONFIG_KEYBOARD_CROS_EC=m
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_CYAPA=m
 CONFIG_MOUSE_ELAN_I2C=m
-CONFIG_MOUSE_PXA930_TRKBALL=m
 CONFIG_MOUSE_NAVPOINT_PXA27x=m
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
@@ -316,12 +255,9 @@ CONFIG_TOUCHSCREEN_FUJITSU=m
 CONFIG_TOUCHSCREEN_ELO=m
 CONFIG_TOUCHSCREEN_MTOUCH=m
 CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_HTCPEN=m
 CONFIG_TOUCHSCREEN_PENMOUNT=m
 CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
 CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_UCB1400=m
-CONFIG_TOUCHSCREEN_WM97XX=m
 CONFIG_TOUCHSCREEN_TOUCHIT213=m
 CONFIG_TOUCHSCREEN_PCAP=m
 CONFIG_TOUCHSCREEN_ST1232=m
@@ -332,7 +268,6 @@ CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
 CONFIG_INPUT_PCAP=m
 CONFIG_INPUT_ADXL34X=m
 CONFIG_SERIO=m
-CONFIG_SERIO_SA1111=m
 CONFIG_LEGACY_PTY_COUNT=8
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
@@ -345,6 +280,7 @@ CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_MUX_PCA954x=m
 CONFIG_I2C_MUX_PINCTRL=m
 CONFIG_I2C_DESIGNWARE_PLATFORM=m
+CONFIG_I2C_GPIO=y
 CONFIG_I2C_PXA_SLAVE=y
 CONFIG_I2C_XILINX=m
 CONFIG_I2C_CROS_EC_TUNNEL=m
@@ -358,16 +294,17 @@ CONFIG_SPI_XILINX=m
 CONFIG_SPI_SPIDEV=m
 CONFIG_PPS=y
 CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_DWAPB=m
 CONFIG_GPIO_GENERIC_PLATFORM=m
 CONFIG_GPIO_MAX732X=m
 CONFIG_GPIO_PCA953X=m
 CONFIG_GPIO_PCF857X=m
+CONFIG_HTC_EGPIO=y
 CONFIG_GPIO_PALMAS=y
 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
 CONFIG_GPIO_MAX7301=m
-CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_SUPPLY_DEBUG=y
 CONFIG_PDA_POWER=m
 CONFIG_BATTERY_SBS=m
@@ -391,13 +328,8 @@ CONFIG_MFD_AS3711=y
 CONFIG_MFD_BCM590XX=m
 CONFIG_MFD_AXP20X=y
 CONFIG_MFD_CROS_EC_DEV=m
-CONFIG_CHROME_PLATFORMS=y
-CONFIG_CROS_EC=m
-CONFIG_CROS_EC_I2C=m
-CONFIG_CROS_EC_SPI=m
 CONFIG_MFD_ASIC3=y
 CONFIG_PMIC_DA903X=y
-CONFIG_HTC_EGPIO=y
 CONFIG_HTC_PASIC3=m
 CONFIG_MFD_MAX14577=y
 CONFIG_MFD_MAX77693=y
@@ -415,7 +347,6 @@ CONFIG_MFD_TC6393XB=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=m
-CONFIG_REGULATOR_USERSPACE_CONSUMER=m
 CONFIG_REGULATOR_ACT8865=m
 CONFIG_REGULATOR_AS3711=m
 CONFIG_REGULATOR_AXP20X=m
@@ -446,11 +377,13 @@ CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_PXA27x=m
 CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_PXA27x=m
 CONFIG_DRM=m
+CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_PXA3XX_GCU=m
@@ -459,40 +392,26 @@ CONFIG_FB_VIRTUAL=m
 CONFIG_FB_SIMPLE=y
 CONFIG_LCD_CORGI=m
 CONFIG_LCD_PLATFORM=m
-CONFIG_LCD_TOSA=m
 CONFIG_BACKLIGHT_PWM=m
-CONFIG_BACKLIGHT_TOSA=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_DYNAMIC_MINORS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
+CONFIG_SND_SEQUENCER=m
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=m
 CONFIG_SND_ATMEL_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_CORGI=m
+CONFIG_SND_PXA_SOC_SSP=m
 CONFIG_SND_PXA2XX_SOC_SPITZ=m
-CONFIG_SND_PXA2XX_SOC_Z2=m
-CONFIG_SND_PXA2XX_SOC_POODLE=m
-CONFIG_SND_PXA2XX_SOC_TOSA=m
-CONFIG_SND_PXA2XX_SOC_E740=m
-CONFIG_SND_PXA2XX_SOC_E750=m
-CONFIG_SND_PXA2XX_SOC_E800=m
-CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_SND_PXA2XX_SOC_PALM27X=y
-CONFIG_SND_SOC_ZYLONITE=m
-CONFIG_SND_PXA2XX_SOC_HX4700=m
-CONFIG_SND_PXA2XX_SOC_MAGICIAN=m
-CONFIG_SND_PXA2XX_SOC_MIOA701=m
-CONFIG_SND_PXA2XX_SOC_IMOTE2=m
 CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_WM8731_I2C=m
 CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_SOUND_PRIME=m
@@ -581,6 +500,7 @@ CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m
 CONFIG_USB_IDMOUSE=m
 CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_GPIO_VBUS=m
 CONFIG_USB_ISP1301=m
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_VBUS_DRAW=500
@@ -627,9 +547,9 @@ CONFIG_RTC_DRV_DS1307=m
 CONFIG_RTC_DRV_MAX8907=m
 CONFIG_RTC_DRV_RS5C372=m
 CONFIG_RTC_DRV_ISL1208=m
-CONFIG_RTC_DRV_PALMAS=m
 CONFIG_RTC_DRV_PCF8563=m
 CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_PALMAS=m
 CONFIG_RTC_DRV_TPS6586X=m
 CONFIG_RTC_DRV_TPS65910=m
 CONFIG_RTC_DRV_S35390A=m
@@ -644,10 +564,16 @@ CONFIG_PXA_DMA=y
 CONFIG_DW_DMAC=m
 CONFIG_UIO=y
 CONFIG_CROS_EC_CHARDEV=m
+CONFIG_CHROME_PLATFORMS=y
+CONFIG_CROS_EC=m
+CONFIG_CROS_EC_I2C=m
+CONFIG_CROS_EC_SPI=m
 CONFIG_COMMON_CLK_S2MPS11=m
 CONFIG_PM_DEVFREQ=y
 CONFIG_EXTCON=y
 CONFIG_MEMORY=y
+CONFIG_IIO=m
+CONFIG_AD5446=m
 CONFIG_PWM=y
 CONFIG_PWM_PXA=m
 CONFIG_PHY_SAMSUNG_USB2=m
@@ -703,7 +629,6 @@ CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
-CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
 CONFIG_NLS_DEFAULT="utf8"
@@ -714,31 +639,12 @@ CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
-CONFIG_FRAME_WARN=0
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_SHIRQ=y
 CONFIG_TIMER_STATS=y
-CONFIG_FUNCTION_TRACER=y
-CONFIG_FTRACE_SYSCALLS=y
-CONFIG_DEBUG_USER=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
@@ -748,9 +654,17 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
-CONFIG_ARM_CRYPTO=y
 CONFIG_CRYPTO_SHA1_ARM=m
 CONFIG_CRYPTO_SHA256_ARM=m
 CONFIG_CRYPTO_SHA512_ARM=m
@@ -762,3 +676,12 @@ CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_FONT_6x11=y
 CONFIG_FONT_MINI_4x6=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_FRAME_WARN=0
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index 3f36887e8333..ab686b9c2ad8 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -1,40 +1,38 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_MSM8X60=y
 CONFIG_ARCH_MSM8960=y
 CONFIG_ARCH_MSM8974=y
 CONFIG_ARCH_MDM9615=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCIE_QCOM=y
 CONFIG_SMP=y
-CONFIG_PREEMPT=y
+CONFIG_ARM_PSCI=y
 CONFIG_HIGHMEM=y
-CONFIG_CLEANCACHE=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPUFREQ_DT=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPAT_BRK is not set
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -57,15 +55,18 @@ CONFIG_BT_HCIUART_BCM=y
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_RFKILL=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIE_QCOM=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
+CONFIG_MTD_QCOMSMEM_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_QCOM=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_QCOMSMEM_PARTS=y
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -130,14 +131,19 @@ CONFIG_PINCTRL_APQ8064=y
 CONFIG_PINCTRL_APQ8084=y
 CONFIG_PINCTRL_IPQ4019=y
 CONFIG_PINCTRL_IPQ8064=y
+CONFIG_PINCTRL_MSM8226=y
 CONFIG_PINCTRL_MSM8660=y
 CONFIG_PINCTRL_MSM8960=y
+CONFIG_PINCTRL_MDM9607=y
 CONFIG_PINCTRL_MDM9615=y
 CONFIG_PINCTRL_MSM8X74=y
-CONFIG_PINCTRL_SDX55=y
+CONFIG_PINCTRL_MSM8909=y
+CONFIG_PINCTRL_MSM8916=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_GPIOLIB=y
+CONFIG_PINCTRL_SDX55=y
+CONFIG_PINCTRL_SDX65=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_MSM=y
@@ -145,26 +151,29 @@ CONFIG_CHARGER_QCOM_SMBB=y
 CONFIG_CHARGER_BQ24190=m
 CONFIG_THERMAL=y
 CONFIG_QCOM_TSENS=y
+CONFIG_WATCHDOG=y
+CONFIG_QCOM_WDT=y
 CONFIG_MFD_PM8XXX=y
 CONFIG_MFD_QCOM_RPM=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_QCOM_RPM=y
+CONFIG_REGULATOR_QCOM_RPMH=y
 CONFIG_REGULATOR_QCOM_SMD_RPM=y
 CONFIG_REGULATOR_QCOM_SPMI=y
-CONFIG_REGULATOR_QCOM_RPMH=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_DRM=y
 CONFIG_DRM_MSM=m
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_ANALOGIX_ANX78XX=m
 CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_LM3630A=y
 CONFIG_BACKLIGHT_LP855X=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_DYNAMIC_MINORS=y
@@ -180,6 +189,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MSM=y
 CONFIG_USB_ACM=y
+CONFIG_USB_DWC3=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
@@ -196,7 +206,6 @@ CONFIG_USB_CONFIGFS_ECM=y
 CONFIG_USB_CONFIGFS_F_FS=y
 CONFIG_USB_ULPI_BUS=y
 CONFIG_USB_ETH=m
-CONFIG_USB_DWC3=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
@@ -215,9 +224,11 @@ CONFIG_DMADEVICES=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_STAGING=y
 CONFIG_COMMON_CLK_QCOM=y
+CONFIG_QCOM_A7PLL=y
+CONFIG_QCOM_CLK_APCS_SDX55=y
 CONFIG_QCOM_CLK_RPM=y
-CONFIG_QCOM_CLK_RPMH=y
 CONFIG_QCOM_CLK_SMD_RPM=y
+CONFIG_QCOM_CLK_RPMH=y
 CONFIG_APQ_MMCC_8084=y
 CONFIG_IPQ_GCC_4019=y
 CONFIG_IPQ_LCC_806X=y
@@ -227,27 +238,35 @@ CONFIG_MDM_LCC_9615=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
 CONFIG_SDX_GCC_55=y
-CONFIG_MSM_IOMMU=y
-CONFIG_ARM_SMMU=y
 CONFIG_HWSPINLOCK=y
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_MAILBOX=y
+CONFIG_QCOM_APCS_IPC=y
+CONFIG_MSM_IOMMU=y
+CONFIG_ARM_SMMU=y
 CONFIG_REMOTEPROC=y
 CONFIG_QCOM_ADSP_PIL=y
+CONFIG_QCOM_Q6V5_PAS=y
 CONFIG_QCOM_Q6V5_PIL=y
 CONFIG_QCOM_WCNSS_PIL=y
 CONFIG_RPMSG_CHAR=y
+CONFIG_RPMSG_CTRL=y
+CONFIG_RPMSG_QCOM_GLINK_SMEM=y
 CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_QCOM_COMMAND_DB=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_OCMEM=y
 CONFIG_QCOM_PM=y
+CONFIG_QCOM_RMTFS_MEM=y
+CONFIG_QCOM_RPMH=y
+CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_RPMPD=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
 CONFIG_QCOM_SMSM=y
-CONFIG_QCOM_RPMH=y
-CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_SOCINFO=y
+CONFIG_QCOM_STATS=y
 CONFIG_QCOM_WCNSS_CTRL=y
 CONFIG_EXTCON_QCOM_SPMI_MISC=y
 CONFIG_IIO=y
@@ -265,14 +284,15 @@ CONFIG_BMP280=y
 CONFIG_PWM=y
 CONFIG_PHY_QCOM_APQ8064_SATA=y
 CONFIG_PHY_QCOM_IPQ806X_SATA=y
-CONFIG_PHY_QCOM_USB_HS=y
-CONFIG_PHY_QCOM_USB_HSIC=y
 CONFIG_PHY_QCOM_QMP=y
+CONFIG_PHY_QCOM_USB_HS=y
 CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
-CONFIG_QCOM_QFPROM=y
+CONFIG_PHY_QCOM_USB_HSIC=y
+CONFIG_NVMEM_QCOM_QFPROM=y
 CONFIG_INTERCONNECT=y
 CONFIG_INTERCONNECT_QCOM=y
 CONFIG_INTERCONNECT_QCOM_MSM8974=m
+CONFIG_INTERCONNECT_QCOM_SDX55=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT3_FS=y
@@ -289,13 +309,19 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_USER_API=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_USER_API_RNG=m
+CONFIG_CRYPTO_USER_API_AEAD=m
+CONFIG_CRYPTO_DEV_QCOM_RNG=m
 CONFIG_DMA_CMA=y
-CONFIG_CMA_SIZE_MBYTES=256
+CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SLUB_DEBUG is not set
 # CONFIG_SCHED_DEBUG is not set
-CONFIG_WATCHDOG=y
-CONFIG_QCOM_WDT=y
-CONFIG_ARM_PSCI=y
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index 483c400dd391..92f803c2805c 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -1,10 +1,8 @@
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_FULL=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_REALVIEW=y
 CONFIG_MACH_REALVIEW_EB=y
@@ -21,7 +19,8 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=tt
 CONFIG_VFP=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -43,6 +42,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_NETDEVICES=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
@@ -61,14 +61,13 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_PL111=y
-CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_DRIVERS is not set
@@ -96,9 +95,9 @@ CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index c090643b1ecb..210974364d61 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -2,16 +2,16 @@
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_RPC=y
 CONFIG_CPU_SA110=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -33,6 +33,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_ARXESCSI=m
@@ -55,12 +56,12 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_RISCPC=y
 # CONFIG_SERIO_SERPORT is not set
+CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=16
 CONFIG_SERIAL_8250_RUNTIME_UARTS=8
 CONFIG_SERIAL_8250_ACORN=y
-CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_PRINTER=m
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
@@ -69,9 +70,6 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_FB=y
 CONFIG_FB_ACORN=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_ACORN_8x8=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SOUND_PRIME=m
@@ -89,10 +87,8 @@ CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_ADFS_FS=y
 CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
 # CONFIG_ACORN_PARTITION_CUMANA is not set
 # CONFIG_ACORN_PARTITION_EESOX is not set
-CONFIG_BSD_DISKLABEL=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -120,8 +116,11 @@ CONFIG_NLS_ISO8859_6=m
 CONFIG_NLS_ISO8859_7=m
 CONFIG_NLS_ISO8859_9=m
 CONFIG_NLS_KOI8_R=m
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_ACORN_8x8=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_LL_UART_8250=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
deleted file mode 100644
index 153009130dab..000000000000
--- a/arch/arm/configs/s3c2410_defconfig
+++ /dev/null
@@ -1,433 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=m
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_ARCH_S3C24XX=y
-CONFIG_S3C_ADC=y
-CONFIG_CPU_S3C2412=y
-CONFIG_CPU_S3C2416=y
-CONFIG_CPU_S3C2440=y
-CONFIG_CPU_S3C2442=y
-CONFIG_CPU_S3C2443=y
-CONFIG_MACH_AML_M5900=y
-CONFIG_ARCH_BAST=y
-CONFIG_ARCH_H1940=y
-CONFIG_MACH_N30=y
-CONFIG_MACH_OTOM=y
-CONFIG_MACH_QT2410=y
-CONFIG_ARCH_SMDK2410=y
-CONFIG_MACH_TCT_HAMMER=y
-CONFIG_MACH_VR1000=y
-CONFIG_MACH_JIVE=y
-CONFIG_MACH_SMDK2412=y
-CONFIG_MACH_VSTMS=y
-CONFIG_MACH_SMDK2416=y
-CONFIG_MACH_ANUBIS=y
-CONFIG_MACH_AT2440EVB=y
-CONFIG_MACH_MINI2440=y
-CONFIG_MACH_NEXCODER_2440=y
-CONFIG_MACH_OSIRIS=y
-CONFIG_MACH_OSIRIS_DVS=m
-CONFIG_MACH_RX3715=y
-CONFIG_ARCH_S3C2440=y
-CONFIG_MACH_NEO1973_GTA02=y
-CONFIG_MACH_RX1950=y
-CONFIG_MACH_SMDK2443=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_APM_EMULATION=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=m
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_SCALABLE=m
-CONFIG_TCP_CONG_LP=m
-CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_YEAH=m
-CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_LOG=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_S3C2410=y
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_AX88796=m
-CONFIG_PARPORT_1284=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_ATA_OVER_ETH=m
-CONFIG_EEPROM_AT24=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_DM9000=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_BCM5974=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_TWIDJOY=m
-CONFIG_JOYSTICK_ZHENHUA=m
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_JOYSTICK_XPAD=m
-CONFIG_JOYSTICK_XPAD_FF=y
-CONFIG_JOYSTICK_XPAD_LEDS=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_ATI_REMOTE2=m
-CONFIG_INPUT_KEYSPAN_REMOTE=m
-CONFIG_INPUT_POWERMATE=m
-CONFIG_INPUT_YEALINK=m
-CONFIG_INPUT_CM109=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_DEV_BUS=m
-CONFIG_PRINTER=y
-CONFIG_PPDEV=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_S3C2410=y
-CONFIG_I2C_SIMTEC=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=m
-CONFIG_SPI_S3C24XX=m
-CONFIG_SPI_SPIDEV=m
-CONFIG_SPI_TLE62X0=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM85=m
-CONFIG_WATCHDOG=y
-CONFIG_S3C2410_WATCHDOG=y
-CONFIG_MFD_SM501=y
-CONFIG_TPS65010=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_S3C2410=y
-CONFIG_FB_SM501=y
-CONFIG_BACKLIGHT_PWM=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_SOC=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_STORAGE_ONETOUCH=m
-CONFIG_USB_STORAGE_KARMA=m
-CONFIG_USB_STORAGE_CYPRESS_ATACB=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_SEVSEG=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_FTDI_ELAN=m
-CONFIG_USB_APPLEDISPLAY=m
-CONFIG_USB_LD=m
-CONFIG_USB_TRANCEVIBRATOR=m
-CONFIG_USB_IOWARRIOR=m
-CONFIG_USB_TEST=m
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_TEST=m
-CONFIG_MMC_SDHCI=m
-CONFIG_MMC_SPI=m
-CONFIG_MMC_S3C=y
-CONFIG_LEDS_S3C24XX=m
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_DAC124S085=m
-CONFIG_LEDS_PWM=m
-CONFIG_LEDS_BD2802=m
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_S3C=y
-CONFIG_DMADEVICES=y
-CONFIG_S3C24XX_DMAC=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_SQUASHFS=m
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 59a258d504aa..93258d5b57ff 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -5,15 +5,6 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_ARCH_MULTI_V6=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_S3C64XX=y
-CONFIG_MACH_SMDK6400=y
-CONFIG_MACH_ANW6410=y
-CONFIG_MACH_MINI6410=y
-CONFIG_MACH_REAL6410=y
-CONFIG_MACH_SMDK6410=y
-CONFIG_MACH_NCP=y
-CONFIG_MACH_HMT=y
-CONFIG_MACH_SMARTQ5=y
-CONFIG_MACH_SMARTQ7=y
 CONFIG_MACH_WLF_CRAGG_6410=y
 CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
 CONFIG_VFP=y
@@ -71,9 +62,9 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_CRAMFS=y
 CONFIG_ROMFS_FS=y
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
index 70919716f815..4c1e480b5bbd 100644
--- a/arch/arm/configs/s5pv210_defconfig
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_CGROUPS=y
@@ -21,7 +21,6 @@ CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_SOLARIS_X86_PARTITION=y
@@ -48,6 +47,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_NETDEVICES=y
 CONFIG_BRCMFMAC=m
 CONFIG_INPUT_EVDEV=y
@@ -115,9 +115,9 @@ CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_CRC_CCITT=y
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index f4c3c0652432..c6aff6fb084d 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -1,5 +1,4 @@
 # CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -7,12 +6,6 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_AT91=y
 CONFIG_SOC_SAMA5D2=y
 CONFIG_SOC_SAMA5D3=y
@@ -25,9 +18,15 @@ CONFIG_KEXEC=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_PM_DEBUG=y
 CONFIG_PM_ADVANCED_DEBUG=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -44,9 +43,6 @@ CONFIG_BRIDGE_VLAN_FILTERING=y
 CONFIG_NET_DSA=m
 CONFIG_VLAN_8021Q=m
 CONFIG_CAN=y
-CONFIG_CAN_AT91=y
-CONFIG_CAN_M_CAN=y
-CONFIG_CAN_M_CAN_PLATFORM=y
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_MAC80211_LEDS=y
@@ -55,14 +51,15 @@ CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_MTD=y
+CONFIG_MTD_TESTS=m
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
@@ -71,12 +68,13 @@ CONFIG_ATMEL_SSC=y
 CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_NET_DSA_MICROCHIP_KSZ9477=m
 CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI=m
-CONFIG_MACB=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
+CONFIG_MACB=y
 # CONFIG_NET_VENDOR_CIRRUS is not set
 # CONFIG_NET_VENDOR_FARADAY is not set
 # CONFIG_NET_VENDOR_INTEL is not set
@@ -89,9 +87,15 @@ CONFIG_MACB=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_MICREL_PHY=y
+CONFIG_CAN_AT91=y
+CONFIG_CAN_M_CAN=y
+CONFIG_CAN_M_CAN_PLATFORM=y
+CONFIG_USB_LAN78XX=m
 CONFIG_LIBERTAS_THINFIRM=m
 CONFIG_LIBERTAS_THINFIRM_USB=m
-CONFIG_RTL8187=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_USB=m
 CONFIG_RT2X00=m
 CONFIG_RT2500USB=m
 CONFIG_RT73USB=m
@@ -99,10 +103,7 @@ CONFIG_RT2800USB=m
 CONFIG_RT2800USB_RT53XX=y
 CONFIG_RT2800USB_RT55XX=y
 CONFIG_RT2800USB_UNKNOWN=y
-CONFIG_MWIFIEX=m
-CONFIG_MWIFIEX_SDIO=m
-CONFIG_MWIFIEX_USB=m
-# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_RTL8187=m
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_QT1070=y
@@ -124,10 +125,10 @@ CONFIG_SPI_ATMEL=y
 CONFIG_SPI_ATMEL_QUADSPI=y
 CONFIG_SPI_GPIO=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_SAMA5D2_PIOBU=m
+CONFIG_GPIO_SAMA5D2_PIOBU=y
+CONFIG_POWER_RESET=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_BATTERY_ACT8945A=y
-CONFIG_POWER_RESET=y
 CONFIG_SENSORS_JC42=m
 CONFIG_WATCHDOG=y
 CONFIG_AT91SAM9X_WATCHDOG=y
@@ -139,24 +140,27 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ACT8865=y
 CONFIG_REGULATOR_ACT8945A=y
-CONFIG_REGULATOR_MCP16502=m
+CONFIG_REGULATOR_MCP16502=y
 CONFIG_REGULATOR_PWM=m
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_SUPPORT_FILTER=y
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_PLATFORM_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_VIDEO_ATMEL_ISC=y
 CONFIG_VIDEO_ATMEL_ISI=y
+CONFIG_VIDEO_MICROCHIP_ISC=y
+CONFIG_VIDEO_MT9V032=m
 CONFIG_VIDEO_OV2640=m
 CONFIG_VIDEO_OV5640=m
 CONFIG_VIDEO_OV7670=m
 CONFIG_VIDEO_OV7740=m
-CONFIG_VIDEO_MT9V032=m
 CONFIG_DRM=y
 CONFIG_DRM_ATMEL_HLCDC=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
@@ -166,11 +170,12 @@ CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_ATMEL_SOC=y
 CONFIG_SND_ATMEL_SOC_WM8904=y
-# CONFIG_HID_GENERIC is not set
 CONFIG_SND_ATMEL_SOC_CLASSD=y
 CONFIG_SND_ATMEL_SOC_PDMIC=y
 CONFIG_SND_ATMEL_SOC_TSE850_PCM5142=m
 CONFIG_SND_ATMEL_SOC_I2S=y
+CONFIG_SND_SOC_MIKROE_PROTO=m
+# CONFIG_HID_GENERIC is not set
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_EHCI_HCD=y
@@ -201,6 +206,9 @@ CONFIG_RTC_DRV_AT91RM9200=y
 CONFIG_DMADEVICES=y
 CONFIG_AT_HDMAC=y
 CONFIG_AT_XDMAC=y
+CONFIG_STAGING=y
+CONFIG_STAGING_MEDIA=y
+CONFIG_VIDEO_HANTRO=m
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_AT91_ADC=y
@@ -214,6 +222,7 @@ CONFIG_PWM_ATMEL_HLCDC_PWM=y
 CONFIG_PWM_ATMEL_TCB=y
 CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
+CONFIG_AUTOFS_FS=m
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_UBIFS_FS=y
@@ -224,14 +233,22 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CFB=y
+CONFIG_CRYPTO_OFB=y
+CONFIG_CRYPTO_XTS=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_DEV_ATMEL_AES=y
+CONFIG_CRYPTO_DEV_ATMEL_TDES=y
+CONFIG_CRYPTO_DEV_ATMEL_SHA=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_USER_API_HASH=m
-CONFIG_CRYPTO_USER_API_SKCIPHER=m
-CONFIG_CRYPTO_DEV_ATMEL_AES=y
-CONFIG_CRYPTO_DEV_ATMEL_TDES=y
-CONFIG_CRYPTO_DEV_ATMEL_SHA=y
diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
new file mode 100644
index 000000000000..954112041403
--- /dev/null
+++ b/arch/arm/configs/sama7_defconfig
@@ -0,0 +1,243 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_NAMESPACES=y
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_FHANDLE is not set
+# CONFIG_IO_URING is not set
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_SAMA7G5=y
+CONFIG_ATMEL_CLOCKSOURCE_TCB=y
+# CONFIG_CACHE_L2X0 is not set
+# CONFIG_ARM_PATCH_IDIV is not set
+# CONFIG_CPU_SW_DOMAIN_PAN is not set
+CONFIG_ARCH_FORCE_MAX_ORDER=14
+CONFIG_UACCESS_WITH_MEMCPY=y
+# CONFIG_ATAGS is not set
+CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk ignore_loglevel"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_COREDUMP is not set
+# CONFIG_SWAP is not set
+CONFIG_SLAB=y
+# CONFIG_COMPACTION is not set
+CONFIG_CMA=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_NET_DSA=m
+CONFIG_VLAN_8021Q=m
+CONFIG_CAN=y
+CONFIG_BT=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+CONFIG_BT_HCIBTUSB=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIVHCI=y
+CONFIG_CFG80211=m
+# CONFIG_CFG80211_DEFAULT_PS is not set
+CONFIG_CFG80211_DEBUGFS=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=m
+CONFIG_MAC80211_LEDS=y
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_PCCARD=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+CONFIG_MTD=y
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ECC_SW_HAMMING is not set
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_NETDEVICES=y
+CONFIG_MACB=y
+CONFIG_MICREL_PHY=y
+CONFIG_CAN_M_CAN=y
+CONFIG_CAN_M_CAN_PLATFORM=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_AT91=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_ATMEL_QUADSPI=y
+CONFIG_SPI_GPIO=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_PINCTRL_AT91PIO4=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_AT91_RESET=y
+CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_STATISTICS=y
+CONFIG_CPU_THERMAL=y
+CONFIG_GENERIC_ADC_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_SAMA5D4_WATCHDOG=y
+CONFIG_MFD_ATMEL_FLEXCOM=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_MCP16502=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_SUPPORT_FILTER=y
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_MICROCHIP_XISC=y
+CONFIG_VIDEO_MICROCHIP_CSI2DC=y
+CONFIG_VIDEO_IMX219=m
+CONFIG_VIDEO_IMX274=m
+CONFIG_VIDEO_OV5647=m
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_ATMEL_SOC=y
+CONFIG_SND_SOC_MIKROE_PROTO=m
+CONFIG_SND_MCHP_SOC_I2S_MCC=y
+CONFIG_SND_MCHP_SOC_SPDIFTX=y
+CONFIG_SND_MCHP_SOC_SPDIFRX=y
+CONFIG_SND_MCHP_SOC_PDMC=y
+CONFIG_SND_SOC_DMIC=y
+CONFIG_SND_SOC_PCM5102A=y
+CONFIG_SND_SOC_SPDIF=y
+CONFIG_SND_SIMPLE_CARD=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_UAS=y
+CONFIG_USB_GADGET=y
+CONFIG_U_SERIAL_CONSOLE=y
+CONFIG_USB_ATMEL_USBA=m
+CONFIG_USB_CONFIGFS=y
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_F_UVC=y
+CONFIG_USB_G_SERIAL=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_AT91=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_NVMEM is not set
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_DMADEVICES=y
+CONFIG_AT_XDMAC=y
+CONFIG_STAGING=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_IIO_SW_TRIGGER=y
+CONFIG_AT91_SAMA5D2_ADC=y
+CONFIG_PWM=y
+CONFIG_PWM_ATMEL=y
+CONFIG_MCHP_EIC=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_NVMEM_MICROCHIP_OTPC=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_AUTOFS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_LSM="N"
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CFB=y
+CONFIG_CRYPTO_OFB=y
+CONFIG_CRYPTO_XTS=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_DEV_ATMEL_AES=y
+CONFIG_CRYPTO_DEV_ATMEL_TDES=y
+CONFIG_CRYPTO_DEV_ATMEL_SHA=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_ITU_T=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=32
+CONFIG_CMA_ALIGNMENT=9
+# CONFIG_DEBUG_MISC is not set
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_STACKTRACE=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_RUNTIME_TESTING_MENU is not set
diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig
deleted file mode 100644
index de33abdeb6fa..000000000000
--- a/arch/arm/configs/shannon_defconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_SHANNON=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linuxrc"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
-CONFIG_PCMCIA_SMC91C92=y
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_WATCHDOG=y
-CONFIG_SA1100_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_SA1100=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index 01a6ebdf033a..0b21c0a47582 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -1,12 +1,11 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
 CONFIG_ARCH_RENESAS=y
 CONFIG_PL310_ERRATA_588369=y
 CONFIG_SMP=y
@@ -25,6 +24,7 @@ CONFIG_CPUFREQ_DT=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -32,15 +32,14 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
+CONFIG_NET_DSA=y
 CONFIG_CAN=y
-CONFIG_CAN_RCAR=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCIE_RCAR_HOST=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
@@ -53,11 +52,14 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_SATA_RCAR=y
 CONFIG_NETDEVICES=y
+CONFIG_NET_DSA_RZN1_A5PSW=y
 CONFIG_SH_ETH=y
 CONFIG_RAVB=y
 CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=y
 CONFIG_MICREL_PHY=y
 CONFIG_SMSC_PHY=y
+CONFIG_CAN_RCAR=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -70,9 +72,14 @@ CONFIG_INPUT_DA9063_ONKEY=y
 CONFIG_INPUT_ADXL34X=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_PCI1XXXX is not set
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_8250_EM=y
+# CONFIG_SERIAL_8250_PERICOM is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DEMUX_PINCTRL=y
@@ -88,6 +95,7 @@ CONFIG_SPI_SH_MSIOF=y
 CONFIG_SPI_SH_HSPI=y
 CONFIG_PINCTRL_RZA1=y
 CONFIG_PINCTRL_RZA2=y
+CONFIG_PINCTRL_RZN1=y
 CONFIG_GPIO_EM=y
 CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_PCA953X=y
@@ -103,6 +111,7 @@ CONFIG_WATCHDOG=y
 CONFIG_DA9063_WATCHDOG=y
 CONFIG_RENESAS_WDT=y
 CONFIG_RENESAS_RZAWDT=y
+CONFIG_RENESAS_RZN1WDT=y
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_DA9063=y
 CONFIG_MFD_STMPE=y
@@ -116,9 +125,9 @@ CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_RENESAS_CEU=y
 CONFIG_VIDEO_RCAR_VIN=y
-CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_RENESAS_FDP1=y
 CONFIG_VIDEO_RENESAS_JPU=y
 CONFIG_VIDEO_RENESAS_VSP1=y
@@ -128,13 +137,16 @@ CONFIG_VIDEO_ADV7604_CEC=y
 CONFIG_VIDEO_ML86V7667=y
 CONFIG_DRM=y
 CONFIG_DRM_RCAR_DU=y
+# CONFIG_DRM_RCAR_USE_MIPI_DSI is not set
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
 CONFIG_DRM_LVDS_CODEC=y
 CONFIG_DRM_SII902X=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_I2C_ADV7511=y
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
+CONFIG_FB=y
 CONFIG_FB_SH_MOBILE_LCDC=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_AS3711=y
@@ -157,6 +169,7 @@ CONFIG_USB_R8A66597_HCD=y
 CONFIG_USB_RENESAS_USBHS=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=y
+CONFIG_USB_RENESAS_USBF=y
 CONFIG_USB_ETH=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
@@ -172,7 +185,10 @@ CONFIG_RTC_DRV_S35390A=y
 CONFIG_RTC_DRV_RX8581=y
 CONFIG_RTC_DRV_DA9063=y
 CONFIG_RTC_DRV_SH=y
+CONFIG_RTC_DRV_RZN1=y
 CONFIG_DMADEVICES=y
+CONFIG_DW_DMAC=y
+CONFIG_RZN1_DMAMUX=y
 CONFIG_RCAR_DMAC=y
 CONFIG_RENESAS_USB_DMAC=y
 CONFIG_STAGING=y
@@ -202,7 +218,6 @@ CONFIG_AK8975=y
 CONFIG_PWM=y
 CONFIG_PWM_RCAR=y
 CONFIG_PWM_RENESAS_TPU=y
-CONFIG_RESET_CONTROLLER=y
 CONFIG_PHY_RCAR_GEN2=y
 CONFIG_PHY_RCAR_GEN3_USB2=y
 # CONFIG_DNOTIFY is not set
@@ -220,6 +235,5 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_FS=y
diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig
deleted file mode 100644
index 28d99d8895f9..000000000000
--- a/arch/arm/configs/simpad_defconfig
+++ /dev/null
@@ -1,104 +0,0 @@
-CONFIG_LOCALVERSION="oe1"
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_SIMPAD=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRTTY_SIR=m
-CONFIG_SA1100_FIR=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO=m
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index 0c60eb382c80..70739e09d0f4 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -9,18 +9,15 @@ CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
-CONFIG_ARCH_SOCFPGA=y
+CONFIG_ARCH_INTEL_SOCFPGA=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -36,9 +33,6 @@ CONFIG_NETWORK_PHY_TIMESTAMPING=y
 CONFIG_VLAN_8021Q=y
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_CAN=y
-CONFIG_CAN_C_CAN=y
-CONFIG_CAN_C_CAN_PLATFORM=y
-CONFIG_CAN_DEBUG_DEVICES=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_PCIE_ALTERA=y
@@ -52,7 +46,6 @@ CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_DENALI_DT=y
 CONFIG_MTD_SPI_NOR=y
 # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_SPI_CADENCE_QUADSPI=y
 CONFIG_OF_OVERLAY=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -64,6 +57,7 @@ CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_ALTERA_TSE=m
@@ -73,6 +67,9 @@ CONFIG_IXGBE=m
 CONFIG_STMMAC_ETH=y
 CONFIG_MARVELL_PHY=y
 CONFIG_MICREL_PHY=y
+CONFIG_CAN_C_CAN=y
+CONFIG_CAN_C_CAN_PLATFORM=y
+CONFIG_CAN_DEBUG_DEVICES=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_STMPE=y
@@ -88,6 +85,7 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
+CONFIG_SPI_CADENCE_QUADSPI=y
 CONFIG_SPI_DESIGNWARE=y
 CONFIG_SPI_DW_MMIO=y
 CONFIG_SPI_SPIDEV=y
@@ -154,7 +152,7 @@ CONFIG_NFSD_V4=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DETECT_HUNG_TASK=y
diff --git a/arch/arm/configs/sp7021_defconfig b/arch/arm/configs/sp7021_defconfig
new file mode 100644
index 000000000000..c6448ac860b6
--- /dev/null
+++ b/arch/arm/configs/sp7021_defconfig
@@ -0,0 +1,59 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_PERF_EVENTS=y
+CONFIG_ARCH_SUNPLUS=y
+# CONFIG_VDSO is not set
+CONFIG_SMP=y
+CONFIG_THUMB2_KERNEL=y
+CONFIG_ARCH_FORCE_MAX_ORDER=11
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_SLAB=y
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_INPUT_SPARSEKMAP=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_RESET_CONTROLLER=y
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+CONFIG_EXFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig
index 3b206a31902f..bfde0c86cdc5 100644
--- a/arch/arm/configs/spear13xx_defconfig
+++ b/arch/arm/configs/spear13xx_defconfig
@@ -1,18 +1,11 @@
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR13XX=y
 CONFIG_MACH_SPEAR1310=y
 CONFIG_MACH_SPEAR1340=y
 # CONFIG_SWP_EMULATE is not set
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCIE_SPEAR13XX=y
 CONFIG_SMP=y
 # CONFIG_SMP_ON_UP is not set
 # CONFIG_ARM_CPU_TOPOLOGY is not set
@@ -20,6 +13,10 @@ CONFIG_AEABI=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_VFP=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
 CONFIG_NET=y
 CONFIG_UNIX=y
@@ -28,6 +25,9 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_NET_IPIP=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIE_SPEAR13XX=y
 CONFIG_MTD=y
 CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -61,7 +61,6 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
 CONFIG_I2C=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
@@ -98,8 +97,8 @@ CONFIG_ROOT_NFS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig
index fc5f71c765ed..a96ed5cf778e 100644
--- a/arch/arm/configs/spear3xx_defconfig
+++ b/arch/arm/configs/spear3xx_defconfig
@@ -1,16 +1,16 @@
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR3XX=y
 CONFIG_MACH_SPEAR300=y
 CONFIG_MACH_SPEAR310=y
 CONFIG_MACH_SPEAR320=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=y
 CONFIG_NET=y
 CONFIG_MTD=y
@@ -41,7 +41,6 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
 CONFIG_I2C=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
@@ -78,8 +77,8 @@ CONFIG_JFFS2_FS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig
index 52a56b8ce6a7..3e2c2abae5ba 100644
--- a/arch/arm/configs/spear6xx_defconfig
+++ b/arch/arm/configs/spear6xx_defconfig
@@ -1,17 +1,16 @@
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BLK_DEV_INITRD=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR6XX=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_PLAT_SPEAR=y
-CONFIG_ARCH_SPEAR6XX=y
 CONFIG_BINFMT_MISC=y
 CONFIG_NET=y
 CONFIG_MTD=y
-CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_FSMC=y
@@ -28,24 +27,21 @@ CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_SMSC is not set
 CONFIG_STMMAC_ETH=y
 # CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
 CONFIG_I2C=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
-CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_DRM=y
+CONFIG_DRM_PL111=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
@@ -67,8 +63,8 @@ CONFIG_JFFS2_FS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index f42c7a502b6e..10108b4a978e 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -1,26 +1,22 @@
 CONFIG_SYSVIPC=y
+CONFIG_PREEMPT=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_PXA=y
 CONFIG_PXA_SHARPSL=y
 CONFIG_MACH_AKITA=y
 CONFIG_MACH_BORZOI=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
 CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_AOUT=m
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_BINFMT_MISC=m
 CONFIG_PM=y
 CONFIG_NET=y
@@ -54,11 +50,6 @@ CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_PXA_FICP=m
 CONFIG_BT=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
@@ -77,6 +68,8 @@ CONFIG_BT_HCIBT3C=m
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_PXA2XX=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -90,10 +83,15 @@ CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
 CONFIG_CHR_DEV_SG=m
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ATA=y
 CONFIG_PATA_PCMCIA=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_ASYNC=m
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
@@ -101,10 +99,6 @@ CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
 # CONFIG_USB_NET_CDC_SUBSET is not set
 CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_BSDCOMP=m
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
@@ -115,11 +109,11 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_SPI=y
 CONFIG_SPI_PXA2XX=y
 CONFIG_FB=y
@@ -130,11 +124,6 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
@@ -151,6 +140,8 @@ CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
 CONFIG_USB=m
 CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=m
@@ -219,25 +210,16 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_PARTITION_ADVANCED=y
+CONFIG_NFS_V4=m
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
@@ -249,5 +231,16 @@ CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
 CONFIG_CRC_CCITT=y
 CONFIG_LIBCRC32C=m
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index 551db328009d..dc1a32f50b7e 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -1,5 +1,6 @@
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -11,8 +12,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EVENTFD is not set
 # CONFIG_AIO is not set
 CONFIG_EMBEDDED=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_MMU is not set
 CONFIG_ARCH_STM32=y
@@ -21,15 +20,12 @@ CONFIG_SET_MEM_PARAM=y
 CONFIG_DRAM_BASE=0x90000000
 CONFIG_FLASH_MEM_BASE=0x08000000
 CONFIG_FLASH_SIZE=0x00200000
-CONFIG_PREEMPT=y
 # CONFIG_ATAGS is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_XIP_KERNEL=y
 CONFIG_XIP_PHYS_ADDR=0x08008000
 CONFIG_BINFMT_FLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
 # CONFIG_COREDUMP is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER is not set
@@ -39,9 +35,9 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_VT is not set
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_SERIAL_STM32=y
 CONFIG_SERIAL_STM32_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -75,12 +71,13 @@ CONFIG_EXT3_FS=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
 CONFIG_NLS=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC7=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SLUB_DEBUG is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_CRYPTO=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index a60c134c5e04..bddc82f78942 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -1,4 +1,4 @@
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
@@ -26,7 +26,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_CAN=y
-CONFIG_CAN_SUN4I=y
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -52,6 +51,7 @@ CONFIG_STMMAC_ETH=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_MICREL_PHY=y
 CONFIG_REALTEK_PHY=y
+CONFIG_CAN_SUN4I=y
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_SUN4I_LRADC=y
@@ -97,9 +97,9 @@ CONFIG_IR_SUNXI=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_SUN4I_CSI=y
 CONFIG_VIDEO_SUN6I_CSI=y
-CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_SUN8I_DEINTERLACE=y
 CONFIG_VIDEO_SUN8I_ROTATE=y
 CONFIG_DRM=y
@@ -108,6 +108,7 @@ CONFIG_DRM_SUN4I_HDMI_CEC=y
 CONFIG_DRM_SUN8I_DW_HDMI=y
 CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_LIMA=y
 CONFIG_FB_SIMPLE=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
deleted file mode 100644
index 3a9503fe84cb..000000000000
--- a/arch/arm/configs/tct_hammer_defconfig
+++ /dev/null
@@ -1,57 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLOB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S3C24XX=y
-CONFIG_MACH_TCT_HAMMER=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=10240
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT_CONSOLE is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_S3C2410=y
-CONFIG_USB_ETH=m
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-# CONFIG_PROC_SYSCTL is not set
-CONFIG_JFFS2_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 13ef3e4dcbb7..f32047e24b63 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -1,5 +1,5 @@
 CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
@@ -16,13 +16,9 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_ELF_CORE is not set
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_SMP=y
 CONFIG_HIGHMEM=y
-CONFIG_SECCOMP=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@@ -32,12 +28,11 @@ CONFIG_CPU_IDLE=y
 CONFIG_ARM_TEGRA_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
-CONFIG_TRUSTED_FOUNDATIONS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
+CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -49,8 +44,6 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_INET_ESP=y
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_OPTIMISTIC_DAD=y
@@ -61,7 +54,6 @@ CONFIG_IPV6_MIP6=y
 CONFIG_IPV6_TUNNEL=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_CAN=y
-CONFIG_CAN_MCP251X=y
 CONFIG_BT=y
 CONFIG_BT_RFCOMM=y
 CONFIG_BT_BNEP=y
@@ -85,8 +77,8 @@ CONFIG_PCI_TEGRA=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TEGRA_GMI=y
+CONFIG_TRUSTED_FOUNDATIONS=y
 CONFIG_MTD=y
-CONFIG_MTD_M25P80=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_AD525X_DPOT=y
@@ -97,6 +89,7 @@ CONFIG_ISL29003=y
 CONFIG_EEPROM_AT24=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
@@ -105,20 +98,25 @@ CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 CONFIG_IGB=y
 CONFIG_R8169=y
+CONFIG_CAN_MCP251X=y
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
 CONFIG_BRCMFMAC=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
 CONFIG_RT2X00=y
 CONFIG_RT2800USB=m
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_TEGRA=y
-CONFIG_KEYBOARD_CAP11XX=y
 CONFIG_KEYBOARD_CROS_EC=y
+CONFIG_KEYBOARD_CAP11XX=y
 CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_ELAN_I2C=m
+CONFIG_MOUSE_ELAN_I2C_SMBUS=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
 CONFIG_TOUCHSCREEN_ELAN=y
@@ -137,9 +135,11 @@ CONFIG_SERIAL_DEV_BUS=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX_GPIO=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
 CONFIG_I2C_TEGRA=y
+CONFIG_I2C_CROS_EC_TUNNEL=m
 CONFIG_SPI=y
 CONFIG_SPI_TEGRA114=y
 CONFIG_SPI_TEGRA20_SFLASH=y
@@ -157,22 +157,26 @@ CONFIG_GPIO_TPS65910=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
 CONFIG_BATTERY_SBS=y
 CONFIG_BATTERY_BQ27XXX=y
 CONFIG_CHARGER_GPIO=y
+CONFIG_CHARGER_BQ24735=y
 CONFIG_CHARGER_SMB347=y
 CONFIG_CHARGER_TPS65090=y
+CONFIG_BATTERY_ACER_A500=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM95245=y
 CONFIG_THERMAL=y
 CONFIG_THERMAL_STATISTICS=y
 CONFIG_CPU_THERMAL=y
+CONFIG_DEVFREQ_THERMAL=y
 CONFIG_TEGRA_SOCTHERM=m
+CONFIG_TEGRA30_TSENSOR=m
 CONFIG_WATCHDOG=y
 CONFIG_MAX77620_WATCHDOG=y
 CONFIG_TEGRA_WATCHDOG=y
 CONFIG_MFD_AS3722=y
-CONFIG_MFD_CROS_EC_DEV=y
 CONFIG_MFD_MAX77620=y
 CONFIG_MFD_MAX8907=y
 CONFIG_MFD_STMPE=y
@@ -180,6 +184,7 @@ CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
 CONFIG_MFD_TPS6586X=y
 CONFIG_MFD_TPS65910=y
+CONFIG_MFD_ACER_A500_EC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_AS3722=y
@@ -193,18 +198,22 @@ CONFIG_REGULATOR_TPS65090=y
 CONFIG_REGULATOR_TPS6586X=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=y
 CONFIG_USB_GSPCA=y
+CONFIG_USB_VIDEO_CLASS=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_TEGRA_VDE=y
 CONFIG_DRM=y
 CONFIG_DRM_NOUVEAU=m
 CONFIG_DRM_TEGRA=y
 CONFIG_DRM_TEGRA_STAGING=y
 CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
+CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y
 CONFIG_DRM_LVDS_CODEC=y
-# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_DRM_TOSHIBA_TC358768=y
+CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -225,6 +234,7 @@ CONFIG_SND_HDA_CODEC_HDMI=y
 CONFIG_SND_SOC=y
 CONFIG_SND_SOC_TEGRA=y
 CONFIG_SND_SOC_TEGRA20_I2S=y
+CONFIG_SND_SOC_TEGRA20_SPDIF=y
 CONFIG_SND_SOC_TEGRA30_I2S=y
 CONFIG_SND_SOC_TEGRA_RT5640=y
 CONFIG_SND_SOC_TEGRA_WM8753=y
@@ -244,18 +254,15 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_CHIPIDEA_TEGRA=y
 CONFIG_USB_GADGET=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_TEGRA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_ACER_A500=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
@@ -282,16 +289,17 @@ CONFIG_SERIO_NVEC_PS2=y
 CONFIG_NVEC_POWER=y
 CONFIG_NVEC_PAZ00=y
 CONFIG_STAGING_MEDIA=y
-CONFIG_TEGRA_VDE=y
+CONFIG_CHROME_PLATFORMS=y
+CONFIG_CROS_EC=y
+CONFIG_CROS_EC_I2C=m
+CONFIG_CROS_EC_SPI=m
 CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
 CONFIG_ARCH_TEGRA_114_SOC=y
 CONFIG_ARCH_TEGRA_124_SOC=y
-CONFIG_PM_DEVFREQ=y
 CONFIG_ARM_TEGRA_DEVFREQ=y
-CONFIG_ARM_TEGRA20_DEVFREQ=y
 CONFIG_MEMORY=y
 CONFIG_IIO=y
 CONFIG_KXCJK1013=y
@@ -332,11 +340,10 @@ CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRC_CCITT=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_SLAB=y
 CONFIG_DEBUG_VM=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
deleted file mode 100644
index d66f0c287d41..000000000000
--- a/arch/arm/configs/trizeps4_defconfig
+++ /dev/null
@@ -1,213 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_ARCH_PXA=y
-CONFIG_TRIZEPS_PXA=y
-CONFIG_MACH_TRIZEPS4=y
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_LOAD_CIS is not set
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_VLAN_8021Q=m
-CONFIG_IRDA=m
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRTTY_SIR=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_CFG80211=y
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_DOC2000=y
-CONFIG_MTD_DOC2001=y
-CONFIG_MTD_DOC2001PLUS=y
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_DISKONCHIP=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_MTD_ONENAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_ATA=m
-CONFIG_PATA_PCMCIA=m
-CONFIG_PATA_PLATFORM=m
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_HOSTAP=y
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_CS=y
-CONFIG_HERMES=y
-CONFIG_PCMCIA_HERMES=y
-CONFIG_PCMCIA_SPECTRUM=y
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_SERIAL=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-CONFIG_I2C_PXA_SLAVE=y
-CONFIG_WATCHDOG=y
-CONFIG_SA1100_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_PXA=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_PXA2XX_AC97=y
-CONFIG_SND_USB_AUDIO=m
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_RTC_DRV_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_LDM_PARTITION=y
-CONFIG_NLS_DEFAULT="iso8859-15"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_USER=y
-CONFIG_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index bcedfe1422aa..0f55815eecb3 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -1,4 +1,3 @@
-# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -20,8 +19,8 @@ CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
+# CONFIG_SWAP is not set
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -39,8 +38,14 @@ CONFIG_CFG80211_DEBUGFS=y
 CONFIG_MAC80211=y
 CONFIG_MAC80211_LEDS=y
 CONFIG_CAIF=y
+CONFIG_NFC=m
+CONFIG_NFC_HCI=m
+CONFIG_NFC_SHDLC=m
+CONFIG_NFC_PN544_I2C=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_GNSS=y
+CONFIG_GNSS_SIRF_SERIAL=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_NETDEVICES=y
@@ -55,11 +60,16 @@ CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_NOMADIK=y
 CONFIG_KEYBOARD_STMPE=y
 CONFIG_KEYBOARD_TC3589X=y
+CONFIG_KEYBOARD_TM2_TOUCHKEY=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
 CONFIG_TOUCHSCREEN_BU21013=y
 CONFIG_TOUCHSCREEN_CY8CTMA140=y
+CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
+CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
+CONFIG_TOUCHSCREEN_MMS114=y
+CONFIG_TOUCHSCREEN_ZINITIX=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_AB8500_PONKEY=y
 CONFIG_INPUT_GPIO_VIBRA=y
@@ -74,10 +84,14 @@ CONFIG_SERIAL_DEV_BUS=y
 CONFIG_HW_RANDOM=y
 CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
+CONFIG_BATTERY_SAMSUNG_SDI=y
+CONFIG_AB8500_BM=y
 CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_NTC_THERMISTOR=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_WATCHDOG=y
@@ -85,14 +99,22 @@ CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
 CONFIG_REGULATOR_AB8500=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_V4L2_FLASH_LED_CLASS=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_NOVATEK_NT35510=y
+CONFIG_DRM_PANEL_NOVATEK_NT35560=y
+CONFIG_DRM_PANEL_SAMSUNG_DB7430=y
 CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
+CONFIG_DRM_PANEL_SAMSUNG_S6D27A1=y
 CONFIG_DRM_PANEL_SAMSUNG_S6E63M0=y
 CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI=y
-CONFIG_DRM_PANEL_SONY_ACX424AKP=y
+CONFIG_DRM_PANEL_WIDECHIPS_WS2401=y
 CONFIG_DRM_LIMA=y
 CONFIG_DRM_MCDE=y
+CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_KTD253=y
 CONFIG_BACKLIGHT_GPIO=y
@@ -112,10 +134,13 @@ CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_FLASH=y
 CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_LP55XX_COMMON=y
 CONFIG_LEDS_LP5521=y
+CONFIG_LEDS_REGULATOR=y
+CONFIG_LEDS_RT8515=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AB8500=y
@@ -124,18 +149,28 @@ CONFIG_DMADEVICES=y
 CONFIG_STE_DMA40=y
 CONFIG_HWSPINLOCK=y
 CONFIG_HSEM_U8500=y
+CONFIG_EXTCON_FSA9480=y
 CONFIG_IIO=y
 CONFIG_IIO_SW_TRIGGER=y
 CONFIG_BMA180=y
+CONFIG_BMC150_ACCEL=y
 CONFIG_IIO_ST_ACCEL_3AXIS=y
+# CONFIG_IIO_ST_ACCEL_SPI_3AXIS is not set
+CONFIG_IIO_RESCALE=y
+CONFIG_MPU3050_I2C=y
 CONFIG_IIO_ST_GYRO_3AXIS=y
+# CONFIG_IIO_ST_GYRO_SPI_3AXIS is not set
 CONFIG_INV_MPU6050_I2C=y
 CONFIG_BH1780=y
 CONFIG_GP2AP002=y
+CONFIG_TSL2772=y
 CONFIG_AK8974=y
 CONFIG_IIO_ST_MAGN_3AXIS=y
+# CONFIG_IIO_ST_MAGN_SPI_3AXIS is not set
+CONFIG_YAMAHA_YAS530=y
 CONFIG_IIO_HRTIMER_TRIGGER=y
 CONFIG_IIO_ST_PRESS=y
+# CONFIG_IIO_ST_PRESS_SPI is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -149,15 +184,12 @@ CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_CRYPTO_DEV_UX500=y
-CONFIG_CRYPTO_DEV_UX500_CRYP=y
-CONFIG_CRYPTO_DEV_UX500_HASH=y
-CONFIG_CRYPTO_DEV_UX500_DEBUG=y
+CONFIG_CRYPTO_DEV_STM32_HASH=y
+CONFIG_CRYPTO_DEV_STM32_CRYP=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index e7ecfb365e91..67e3f9138306 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -4,7 +4,6 @@ CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_VERSATILE=y
 CONFIG_AEABI=y
@@ -15,6 +14,7 @@ CONFIG_VFP=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
+CONFIG_SLAB=y
 CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -57,10 +57,11 @@ CONFIG_GPIO_PL061=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_ARM_VERSATILE=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_DISPLAY_CONNECTOR=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
 CONFIG_DRM_PL111=y
-CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
@@ -85,13 +86,10 @@ CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=m
-CONFIG_FONTS=y
-CONFIG_FONT_ACORN_8x8=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig
index 4479369540f2..96ad442089bd 100644
--- a/arch/arm/configs/vexpress_defconfig
+++ b/arch/arm/configs/vexpress_defconfig
@@ -1,5 +1,7 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_FULL=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -11,9 +13,6 @@ CONFIG_CPUSETS=y
 # CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_VEXPRESS_DCSCB=y
 CONFIG_ARCH_VEXPRESS_TC2_PM=y
@@ -23,14 +22,14 @@ CONFIG_MCPM=y
 CONFIG_VMSPLIT_2G=y
 CONFIG_NR_CPUS=8
 CONFIG_ARM_PSCI=y
-CONFIG_CMA=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAMA0"
 CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -43,9 +42,9 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_NET_9P=y
 CONFIG_NET_9P_VIRTIO=y
 CONFIG_DEVTMPFS=y
-CONFIG_DMA_CMA=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
@@ -57,9 +56,9 @@ CONFIG_MTD_UBI=y
 CONFIG_VIRTIO_BLK=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 CONFIG_SCSI_VIRTIO=y
 CONFIG_ATA=y
-# CONFIG_SATA_PMP is not set
 CONFIG_NETDEVICES=y
 CONFIG_VIRTIO_NET=y
 CONFIG_SMC91X=y
@@ -79,13 +78,12 @@ CONFIG_SENSORS_VEXPRESS=y
 CONFIG_REGULATOR_VEXPRESS=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_SII902X=y
 CONFIG_DRM_PL111=y
-CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 # CONFIG_SND_DRIVERS is not set
@@ -136,10 +134,10 @@ CONFIG_ROOT_NFS=y
 CONFIG_9P_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
+# CONFIG_CRYPTO_HW is not set
+CONFIG_DMA_CMA=y
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/vf610m4_defconfig b/arch/arm/configs/vf610m4_defconfig
index a89f035c3b01..2e47cc57a928 100644
--- a/arch/arm/configs/vf610m4_defconfig
+++ b/arch/arm/configs/vf610m4_defconfig
@@ -16,10 +16,9 @@ CONFIG_FLASH_SIZE=0x01000000
 CONFIG_CMDLINE="console=/dev/ttyLP2"
 CONFIG_XIP_KERNEL=y
 CONFIG_XIP_PHYS_ADDR=0x0f000080
+# CONFIG_SUSPEND is not set
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-CONFIG_BINFMT_SHARED_FLAT=y
-# CONFIG_SUSPEND is not set
 # CONFIG_UEVENT_HELPER is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
deleted file mode 100644
index 989599ce5300..000000000000
--- a/arch/arm/configs/viper_defconfig
+++ /dev/null
@@ -1,161 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=13
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EXPERT=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_VIPER=y
-CONFIG_IWMMXT=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_FPE_FASTFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-CONFIG_ATA=m
-# CONFIG_SATA_PMP is not set
-CONFIG_PATA_PCMCIA=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_NET_PCMCIA=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_INPUT_MOUSEDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_FUJITSU=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_HTCPEN=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_TOUCHIT213=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-# CONFIG_VT_CONSOLE is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=5
-CONFIG_SERIAL_8250_RUNTIME_UARTS=5
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_PXA=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_PXA=m
-CONFIG_FB_PXA_PARAMETERS=y
-CONFIG_BACKLIGHT_PWM=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PXA2XX_AC97=m
-CONFIG_USB=m
-CONFIG_USB_ISP116X_HCD=m
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_R8A66597_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_G_PRINTER=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_SA1100=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRC_T10DIF=m
diff --git a/arch/arm/configs/vt8500_v6_v7_defconfig b/arch/arm/configs/vt8500_v6_v7_defconfig
index 9b85326ba287..41607a84abc8 100644
--- a/arch/arm/configs/vt8500_v6_v7_defconfig
+++ b/arch/arm/configs/vt8500_v6_v7_defconfig
@@ -1,4 +1,4 @@
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_ARCH_MULTI_V6=y
@@ -50,8 +50,8 @@ CONFIG_I2C_WMT=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_WM8750=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
+CONFIG_POWER_SUPPLY=y
 CONFIG_MFD_SYSCON=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
diff --git a/arch/arm/configs/wpcm450_defconfig b/arch/arm/configs/wpcm450_defconfig
new file mode 100644
index 000000000000..45483deab034
--- /dev/null
+++ b/arch/arm/configs/wpcm450_defconfig
@@ -0,0 +1,211 @@
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_PROFILING=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_NPCM=y
+CONFIG_ARCH_WPCM450=y
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+CONFIG_AEABI=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+# CONFIG_ATAGS is not set
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_CPU_IDLE=y
+CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
+CONFIG_STRICT_KERNEL_RWX=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_EDSA=y
+CONFIG_NET_DSA_TAG_TRAILER=y
+CONFIG_NET_PKTGEN=m
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SRAM=y
+CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ALACRITECH is not set
+# CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CADENCE is not set
+# CONFIG_NET_VENDOR_CAVIUM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_CORTINA is not set
+# CONFIG_NET_VENDOR_EZCHIP is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_GOOGLE is not set
+# CONFIG_NET_VENDOR_HISILICON is not set
+# CONFIG_NET_VENDOR_HUAWEI is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_MICROSEMI is not set
+# CONFIG_NET_VENDOR_NI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
+# CONFIG_NET_VENDOR_PENSANDO is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_RENESAS is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SOLARFLARE is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_SOCIONEXT is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_NET_VENDOR_XILINX is not set
+CONFIG_REALTEK_PHY=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_LEGACY_TIOCSTI is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_NPCM7XX_KCS_IPMI_BMC=y
+CONFIG_IPMI_KCS_BMC_CDEV_IPMI=y
+CONFIG_IPMI_KCS_BMC_SERIO=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_NPCM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_NPCM=y
+CONFIG_SPI=y
+CONFIG_SPI_WPCM_FIU=y
+CONFIG_SPI_NPCM_PSPI=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_WPCM450=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_SENSORS_NPCM7XX=y
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_NPCM7XX_WATCHDOG=y
+CONFIG_MFD_SYSCON=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_HID is not set
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_CONFIGFS=y
+CONFIG_USB_CONFIGFS_SERIAL=y
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_CONFIGFS_F_HID=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_DMADEVICES=y
+CONFIG_SYNC_FILE=y
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_VHOST_MENU is not set
+CONFIG_STAGING=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PWM=y
+CONFIG_GENERIC_PHY=y
+CONFIG_PECI=y
+CONFIG_PECI_CPU=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_SQUASHFS_ZSTD=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_UTF8=y
+CONFIG_KEYS=y
+CONFIG_HARDENED_USERCOPY=y
+CONFIG_FORTIFY_SOURCE=y
+CONFIG_CRYPTO_RSA=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_CMAC=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_ASYMMETRIC_KEY_TYPE=y
+CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
+CONFIG_X509_CERTIFICATE_PARSER=y
+CONFIG_PKCS7_MESSAGE_PARSER=y
+CONFIG_SYSTEM_TRUSTED_KEYRING=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_ITU_T=m
+CONFIG_LIBCRC32C=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+CONFIG_IO_STRICT_DEVMEM=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_UART_8250=y
+CONFIG_DEBUG_UART_PHYS=0xb8000000
+CONFIG_DEBUG_UART_VIRT=0x0ff000000
+CONFIG_DEBUG_UART_8250_WORD=y
+CONFIG_EARLY_PRINTK=y
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
deleted file mode 100644
index f1fbdfc5c8c6..000000000000
--- a/arch/arm/configs/xcep_defconfig
+++ /dev/null
@@ -1,90 +0,0 @@
-CONFIG_LOCALVERSION=".xcep-itech"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_UID16 is not set
-# CONFIG_SHMEM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLOB=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLOCK is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_XCEP=y
-CONFIG_IWMMXT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_PXA=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_MAX6650=m
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SA1100=m
-CONFIG_DMADEVICES=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_UTF8=m
-CONFIG_PRINTK_TIME=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_LIBCRC32C=m
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
deleted file mode 100644
index d3b98c4d225b..000000000000
--- a/arch/arm/configs/zeus_defconfig
+++ /dev/null
@@ -1,174 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_TINY_RCU=y
-CONFIG_LOG_BUF_SHIFT=13
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_ARCOM_ZEUS=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_CFG80211=m
-CONFIG_LIB80211=m
-CONFIG_MAC80211=m
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_EEPROM_AT24=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-CONFIG_ATA=m
-# CONFIG_SATA_PMP is not set
-CONFIG_PATA_PCMCIA=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_RT2X00=m
-CONFIG_RT73USB=m
-CONFIG_NET_PCMCIA=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_FUJITSU=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_HTCPEN=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_TOUCHIT213=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=7
-CONFIG_SERIAL_8250_RUNTIME_UARTS=7
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_SENSORS_LM75=m
-CONFIG_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_PXA=m
-CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_PXA2XX_AC97=m
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_PCMCIA is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_USB=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_PXA27X=y
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_G_PRINTER=m
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_ISL1208=m
-CONFIG_RTC_DRV_PXA=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=m
diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig
index 2b575792363e..847b7a003356 100644
--- a/arch/arm/crypto/Kconfig
+++ b/arch/arm/crypto/Kconfig
@@ -1,92 +1,158 @@
 # SPDX-License-Identifier: GPL-2.0
 
-menuconfig ARM_CRYPTO
-	bool "ARM Accelerated Cryptographic Algorithms"
-	depends on ARM
+menu "Accelerated Cryptographic Algorithms for CPU (arm)"
+
+config CRYPTO_CURVE25519_NEON
+	tristate "Public key crypto: Curve25519 (NEON)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_LIB_CURVE25519_GENERIC
+	select CRYPTO_ARCH_HAVE_LIB_CURVE25519
+	help
+	  Curve25519 algorithm
+
+	  Architecture: arm with
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_GHASH_ARM_CE
+	tristate "Hash functions: GHASH (PMULL/NEON/ARMv8 Crypto Extensions)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_AEAD
+	select CRYPTO_HASH
+	select CRYPTO_CRYPTD
+	select CRYPTO_LIB_AES
+	select CRYPTO_LIB_GF128MUL
 	help
-	  Say Y here to choose from a selection of cryptographic algorithms
-	  implemented using ARM specific CPU features or instructions.
+	  GCM GHASH function (NIST SP800-38D)
 
-if ARM_CRYPTO
+	  Architecture: arm using
+	  - PMULL (Polynomial Multiply Long) instructions
+	  - NEON (Advanced SIMD) extensions
+	  - ARMv8 Crypto Extensions
+
+	  Use an implementation of GHASH (used by the GCM AEAD chaining mode)
+	  that uses the 64x64 to 128 bit polynomial multiplication (vmull.p64)
+	  that is part of the ARMv8 Crypto Extensions, or a slower variant that
+	  uses the vmull.p8 instruction that is part of the basic NEON ISA.
+
+config CRYPTO_NHPOLY1305_NEON
+	tristate "Hash functions: NHPoly1305 (NEON)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_NHPOLY1305
+	help
+	  NHPoly1305 hash function (Adiantum)
+
+	  Architecture: arm using:
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_POLY1305_ARM
+	tristate "Hash functions: Poly1305 (NEON)"
+	select CRYPTO_HASH
+	select CRYPTO_ARCH_HAVE_LIB_POLY1305
+	help
+	  Poly1305 authenticator algorithm (RFC7539)
+
+	  Architecture: arm optionally using
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_BLAKE2S_ARM
+	bool "Hash functions: BLAKE2s"
+	select CRYPTO_ARCH_HAVE_LIB_BLAKE2S
+	help
+	  BLAKE2s cryptographic hash function (RFC 7693)
+
+	  Architecture: arm
+
+	  This is faster than the generic implementations of BLAKE2s and
+	  BLAKE2b, but slower than the NEON implementation of BLAKE2b.
+	  There is no NEON implementation of BLAKE2s, since NEON doesn't
+	  really help with it.
+
+config CRYPTO_BLAKE2B_NEON
+	tristate "Hash functions: BLAKE2b (NEON)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_BLAKE2B
+	help
+	  BLAKE2b cryptographic hash function (RFC 7693)
+
+	  Architecture: arm using
+	  - NEON (Advanced SIMD) extensions
+
+	  BLAKE2b digest algorithm optimized with ARM NEON instructions.
+	  On ARM processors that have NEON support but not the ARMv8
+	  Crypto Extensions, typically this BLAKE2b implementation is
+	  much faster than the SHA-2 family and slightly faster than
+	  SHA-1.
 
 config CRYPTO_SHA1_ARM
-	tristate "SHA1 digest algorithm (ARM-asm)"
+	tristate "Hash functions: SHA-1"
 	select CRYPTO_SHA1
 	select CRYPTO_HASH
 	help
-	  SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
-	  using optimized ARM assembler.
+	  SHA-1 secure hash algorithm (FIPS 180)
+
+	  Architecture: arm
 
 config CRYPTO_SHA1_ARM_NEON
-	tristate "SHA1 digest algorithm (ARM NEON)"
+	tristate "Hash functions: SHA-1 (NEON)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SHA1_ARM
 	select CRYPTO_SHA1
 	select CRYPTO_HASH
 	help
-	  SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
-	  using optimized ARM NEON assembly, when NEON instructions are
-	  available.
+	  SHA-1 secure hash algorithm (FIPS 180)
+
+	  Architecture: arm using
+	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_SHA1_ARM_CE
-	tristate "SHA1 digest algorithm (ARM v8 Crypto Extensions)"
+	tristate "Hash functions: SHA-1 (ARMv8 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SHA1_ARM
 	select CRYPTO_HASH
 	help
-	  SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
-	  using special ARMv8 Crypto Extensions.
+	  SHA-1 secure hash algorithm (FIPS 180)
+
+	  Architecture: arm using ARMv8 Crypto Extensions
 
 config CRYPTO_SHA2_ARM_CE
-	tristate "SHA-224/256 digest algorithm (ARM v8 Crypto Extensions)"
+	tristate "Hash functions: SHA-224 and SHA-256 (ARMv8 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SHA256_ARM
 	select CRYPTO_HASH
 	help
-	  SHA-256 secure hash standard (DFIPS 180-2) implemented
-	  using special ARMv8 Crypto Extensions.
+	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
+
+	  Architecture: arm using
+	  - ARMv8 Crypto Extensions
 
 config CRYPTO_SHA256_ARM
-	tristate "SHA-224/256 digest algorithm (ARM-asm and NEON)"
+	tristate "Hash functions: SHA-224 and SHA-256 (NEON)"
 	select CRYPTO_HASH
 	depends on !CPU_V7M
 	help
-	  SHA-256 secure hash standard (DFIPS 180-2) implemented
-	  using optimized ARM assembler and NEON, when available.
+	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
+
+	  Architecture: arm using
+	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_SHA512_ARM
-	tristate "SHA-384/512 digest algorithm (ARM-asm and NEON)"
+	tristate "Hash functions: SHA-384 and SHA-512 (NEON)"
 	select CRYPTO_HASH
 	depends on !CPU_V7M
 	help
-	  SHA-512 secure hash standard (DFIPS 180-2) implemented
-	  using optimized ARM assembler and NEON, when available.
-
-config CRYPTO_BLAKE2S_ARM
-	tristate "BLAKE2s digest algorithm (ARM)"
-	select CRYPTO_ARCH_HAVE_LIB_BLAKE2S
-	help
-	  BLAKE2s digest algorithm optimized with ARM scalar instructions.  This
-	  is faster than the generic implementations of BLAKE2s and BLAKE2b, but
-	  slower than the NEON implementation of BLAKE2b.  (There is no NEON
-	  implementation of BLAKE2s, since NEON doesn't really help with it.)
+	  SHA-384 and SHA-512 secure hash algorithms (FIPS 180)
 
-config CRYPTO_BLAKE2B_NEON
-	tristate "BLAKE2b digest algorithm (ARM NEON)"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_BLAKE2B
-	help
-	  BLAKE2b digest algorithm optimized with ARM NEON instructions.
-	  On ARM processors that have NEON support but not the ARMv8
-	  Crypto Extensions, typically this BLAKE2b implementation is
-	  much faster than SHA-2 and slightly faster than SHA-1.
+	  Architecture: arm using
+	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_AES_ARM
-	tristate "Scalar AES cipher for ARM"
+	tristate "Ciphers: AES"
 	select CRYPTO_ALGAPI
 	select CRYPTO_AES
 	help
-	  Use optimized AES assembler routines for ARM platforms.
+	  Block ciphers: AES cipher algorithms (FIPS-197)
+
+	  Architecture: arm
 
 	  On ARM processors without the Crypto Extensions, this is the
 	  fastest AES implementation for single blocks.  For multiple
@@ -98,14 +164,21 @@ config CRYPTO_AES_ARM
 	  such attacks very difficult.
 
 config CRYPTO_AES_ARM_BS
-	tristate "Bit sliced AES using NEON instructions"
+	tristate "Ciphers: AES, modes: ECB/CBC/CTR/XTS (bit-sliced NEON)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_LIB_AES
+	select CRYPTO_AES
+	select CRYPTO_CBC
 	select CRYPTO_SIMD
 	help
-	  Use a faster and more secure NEON based implementation of AES in CBC,
-	  CTR and XTS modes
+	  Length-preserving ciphers: AES cipher algorithms (FIPS-197)
+	  with block cipher modes:
+	   - ECB (Electronic Codebook) mode (NIST SP800-38A)
+	   - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
+	   - CTR (Counter) mode (NIST SP800-38A)
+	   - XTS (XOR Encrypt XOR with ciphertext stealing) mode (NIST SP800-38E
+	     and IEEE 1619)
 
 	  Bit sliced AES gives around 45% speedup on Cortex-A15 for CTR mode
 	  and for XTS mode encryption, CBC and XTS mode decryption speedup is
@@ -114,58 +187,59 @@ config CRYPTO_AES_ARM_BS
 	  believed to be invulnerable to cache timing attacks.
 
 config CRYPTO_AES_ARM_CE
-	tristate "Accelerated AES using ARMv8 Crypto Extensions"
+	tristate "Ciphers: AES, modes: ECB/CBC/CTS/CTR/XTS (ARMv8 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_SKCIPHER
 	select CRYPTO_LIB_AES
 	select CRYPTO_SIMD
 	help
-	  Use an implementation of AES in CBC, CTR and XTS modes that uses
-	  ARMv8 Crypto Extensions
+	  Length-preserving ciphers: AES cipher algorithms (FIPS-197)
+	   with block cipher modes:
+	   - ECB (Electronic Codebook) mode (NIST SP800-38A)
+	   - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
+	   - CTR (Counter) mode (NIST SP800-38A)
+	   - CTS (Cipher Text Stealing) mode (NIST SP800-38A)
+	   - XTS (XOR Encrypt XOR with ciphertext stealing) mode (NIST SP800-38E
+	     and IEEE 1619)
+
+	  Architecture: arm using:
+	  - ARMv8 Crypto Extensions
 
-config CRYPTO_GHASH_ARM_CE
-	tristate "PMULL-accelerated GHASH using NEON/ARMv8 Crypto Extensions"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_HASH
-	select CRYPTO_CRYPTD
-	select CRYPTO_GF128MUL
+config CRYPTO_CHACHA20_NEON
+	tristate "Ciphers: ChaCha20, XChaCha20, XChaCha12 (NEON)"
+	select CRYPTO_SKCIPHER
+	select CRYPTO_ARCH_HAVE_LIB_CHACHA
 	help
-	  Use an implementation of GHASH (used by the GCM AEAD chaining mode)
-	  that uses the 64x64 to 128 bit polynomial multiplication (vmull.p64)
-	  that is part of the ARMv8 Crypto Extensions, or a slower variant that
-	  uses the vmull.p8 instruction that is part of the basic NEON ISA.
+	  Length-preserving ciphers: ChaCha20, XChaCha20, and XChaCha12
+	  stream cipher algorithms
 
-config CRYPTO_CRCT10DIF_ARM_CE
-	tristate "CRCT10DIF digest algorithm using PMULL instructions"
-	depends on KERNEL_MODE_NEON
-	depends on CRC_T10DIF
-	select CRYPTO_HASH
+	  Architecture: arm using:
+	  - NEON (Advanced SIMD) extensions
 
 config CRYPTO_CRC32_ARM_CE
-	tristate "CRC32(C) digest algorithm using CRC and/or PMULL instructions"
+	tristate "CRC32C and CRC32"
 	depends on KERNEL_MODE_NEON
 	depends on CRC32
 	select CRYPTO_HASH
+	help
+	  CRC32c CRC algorithm with the iSCSI polynomial (RFC 3385 and RFC 3720)
+	  and CRC32 CRC algorithm (IEEE 802.3)
 
-config CRYPTO_CHACHA20_NEON
-	tristate "NEON and scalar accelerated ChaCha stream cipher algorithms"
-	select CRYPTO_SKCIPHER
-	select CRYPTO_ARCH_HAVE_LIB_CHACHA
+	  Architecture: arm using:
+	  - CRC and/or PMULL instructions
 
-config CRYPTO_POLY1305_ARM
-	tristate "Accelerated scalar and SIMD Poly1305 hash implementations"
-	select CRYPTO_HASH
-	select CRYPTO_ARCH_HAVE_LIB_POLY1305
+	  Drivers: crc32-arm-ce and crc32c-arm-ce
 
-config CRYPTO_NHPOLY1305_NEON
-	tristate "NEON accelerated NHPoly1305 hash function (for Adiantum)"
+config CRYPTO_CRCT10DIF_ARM_CE
+	tristate "CRCT10DIF"
 	depends on KERNEL_MODE_NEON
-	select CRYPTO_NHPOLY1305
+	depends on CRC_T10DIF
+	select CRYPTO_HASH
+	help
+	  CRC16 CRC algorithm used for the T10 (SCSI) Data Integrity Field (DIF)
 
-config CRYPTO_CURVE25519_NEON
-	tristate "NEON accelerated Curve25519 scalar multiplication library"
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_LIB_CURVE25519_GENERIC
-	select CRYPTO_ARCH_HAVE_LIB_CURVE25519
+	  Architecture: arm using:
+	  - PMULL (Polynomial Multiply Long) instructions
+
+endmenu
 
-endif
diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile
index 8f26c454ea12..13e62c7c25dc 100644
--- a/arch/arm/crypto/Makefile
+++ b/arch/arm/crypto/Makefile
@@ -9,7 +9,7 @@ obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o
 obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o
 obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o
 obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o
-obj-$(CONFIG_CRYPTO_BLAKE2S_ARM) += blake2s-arm.o
+obj-$(CONFIG_CRYPTO_BLAKE2S_ARM) += libblake2s-arm.o
 obj-$(CONFIG_CRYPTO_BLAKE2B_NEON) += blake2b-neon.o
 obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
 obj-$(CONFIG_CRYPTO_POLY1305_ARM) += poly1305-arm.o
@@ -31,7 +31,7 @@ sha256-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha256_neon_glue.o
 sha256-arm-y	:= sha256-core.o sha256_glue.o $(sha256-arm-neon-y)
 sha512-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha512-neon-glue.o
 sha512-arm-y	:= sha512-core.o sha512-glue.o $(sha512-arm-neon-y)
-blake2s-arm-y   := blake2s-core.o blake2s-glue.o
+libblake2s-arm-y:= blake2s-core.o blake2s-glue.o
 blake2b-neon-y  := blake2b-neon-core.o blake2b-neon-glue.o
 sha1-arm-ce-y	:= sha1-ce-core.o sha1-ce-glue.o
 sha2-arm-ce-y	:= sha2-ce-core.o sha2-ce-glue.o
@@ -45,23 +45,20 @@ poly1305-arm-y := poly1305-core.o poly1305-glue.o
 nhpoly1305-neon-y := nh-neon-core.o nhpoly1305-neon-glue.o
 curve25519-neon-y := curve25519-core.o curve25519-glue.o
 
-ifdef REGENERATE_ARM_CRYPTO
 quiet_cmd_perl = PERL    $@
       cmd_perl = $(PERL) $(<) > $(@)
 
-$(src)/poly1305-core.S_shipped: $(src)/poly1305-armv4.pl
+$(obj)/%-core.S: $(src)/%-armv4.pl
 	$(call cmd,perl)
 
-$(src)/sha256-core.S_shipped: $(src)/sha256-armv4.pl
-	$(call cmd,perl)
+clean-files += poly1305-core.S sha256-core.S sha512-core.S
 
-$(src)/sha512-core.S_shipped: $(src)/sha512-armv4.pl
-	$(call cmd,perl)
-endif
+aflags-thumb2-$(CONFIG_THUMB2_KERNEL)  := -U__thumb2__ -D__thumb2__=1
 
-clean-files += poly1305-core.S sha256-core.S sha512-core.S
+AFLAGS_sha256-core.o += $(aflags-thumb2-y)
+AFLAGS_sha512-core.o += $(aflags-thumb2-y)
 
 # massage the perlasm code a bit so we only get the NEON routine if we need it
 poly1305-aflags-$(CONFIG_CPU_V7) := -U__LINUX_ARM_ARCH__ -D__LINUX_ARM_ARCH__=5
 poly1305-aflags-$(CONFIG_KERNEL_MODE_NEON) := -U__LINUX_ARM_ARCH__ -D__LINUX_ARM_ARCH__=7
-AFLAGS_poly1305-core.o += $(poly1305-aflags-y)
+AFLAGS_poly1305-core.o += $(poly1305-aflags-y) $(aflags-thumb2-y)
diff --git a/arch/arm/crypto/aes-cipher-core.S b/arch/arm/crypto/aes-cipher-core.S
index 472e56d09eea..1da3f41359aa 100644
--- a/arch/arm/crypto/aes-cipher-core.S
+++ b/arch/arm/crypto/aes-cipher-core.S
@@ -99,28 +99,6 @@
 	__hround	\out2, \out3, \in2, \in1, \in0, \in3, \in1, \in0, 0, \sz, \op, \oldcpsr
 	.endm
 
-	.macro		__rev, out, in
-	.if		__LINUX_ARM_ARCH__ < 6
-	lsl		t0, \in, #24
-	and		t1, \in, #0xff00
-	and		t2, \in, #0xff0000
-	orr		\out, t0, \in, lsr #24
-	orr		\out, \out, t1, lsl #8
-	orr		\out, \out, t2, lsr #8
-	.else
-	rev		\out, \in
-	.endif
-	.endm
-
-	.macro		__adrl, out, sym, c
-	.if		__LINUX_ARM_ARCH__ < 7
-	ldr\c		\out, =\sym
-	.else
-	movw\c		\out, #:lower16:\sym
-	movt\c		\out, #:upper16:\sym
-	.endif
-	.endm
-
 	.macro		do_crypt, round, ttab, ltab, bsz
 	push		{r3-r11, lr}
 
@@ -133,10 +111,10 @@
 	ldr		r7, [in, #12]
 
 #ifdef CONFIG_CPU_BIG_ENDIAN
-	__rev		r4, r4
-	__rev		r5, r5
-	__rev		r6, r6
-	__rev		r7, r7
+	rev_l		r4, t0
+	rev_l		r5, t0
+	rev_l		r6, t0
+	rev_l		r7, t0
 #endif
 
 	eor		r4, r4, r8
@@ -144,7 +122,7 @@
 	eor		r6, r6, r10
 	eor		r7, r7, r11
 
-	__adrl		ttab, \ttab
+	mov_l		ttab, \ttab
 	/*
 	 * Disable interrupts and prefetch the 1024-byte 'ft' or 'it' table into
 	 * L1 cache, assuming cacheline size >= 32.  This is a hardening measure
@@ -180,7 +158,7 @@
 2:	.ifb		\ltab
 	add		ttab, ttab, #1
 	.else
-	__adrl		ttab, \ltab
+	mov_l		ttab, \ltab
 	// Prefetch inverse S-box for final round; see explanation above
 	.set		i, 0
 	.rept		256 / 64
@@ -194,10 +172,10 @@
 	\round		r4, r5, r6, r7, r8, r9, r10, r11, \bsz, b, rounds
 
 #ifdef CONFIG_CPU_BIG_ENDIAN
-	__rev		r4, r4
-	__rev		r5, r5
-	__rev		r6, r6
-	__rev		r7, r7
+	rev_l		r4, t0
+	rev_l		r5, t0
+	rev_l		r6, t0
+	rev_l		r7, t0
 #endif
 
 	ldr		out, [sp]
diff --git a/arch/arm/crypto/aes-cipher-glue.c b/arch/arm/crypto/aes-cipher-glue.c
index 8cd00f56800e..6dfaef2d8f91 100644
--- a/arch/arm/crypto/aes-cipher-glue.c
+++ b/arch/arm/crypto/aes-cipher-glue.c
@@ -7,7 +7,7 @@
  */
 
 #include <crypto/aes.h>
-#include <linux/crypto.h>
+#include <crypto/algapi.h>
 #include <linux/module.h>
 
 asmlinkage void __aes_arm_encrypt(u32 *rk, int rounds, const u8 *in, u8 *out);
diff --git a/arch/arm/crypto/aes-neonbs-core.S b/arch/arm/crypto/aes-neonbs-core.S
index 7d0cc7f226a5..7b61032f29fa 100644
--- a/arch/arm/crypto/aes-neonbs-core.S
+++ b/arch/arm/crypto/aes-neonbs-core.S
@@ -758,29 +758,24 @@ ENTRY(aesbs_cbc_decrypt)
 ENDPROC(aesbs_cbc_decrypt)
 
 	.macro		next_ctr, q
-	vmov.32		\q\()h[1], r10
+	vmov		\q\()h, r9, r10
 	adds		r10, r10, #1
-	vmov.32		\q\()h[0], r9
 	adcs		r9, r9, #0
-	vmov.32		\q\()l[1], r8
+	vmov		\q\()l, r7, r8
 	adcs		r8, r8, #0
-	vmov.32		\q\()l[0], r7
 	adc		r7, r7, #0
 	vrev32.8	\q, \q
 	.endm
 
 	/*
 	 * aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[],
-	 *		     int rounds, int blocks, u8 ctr[], u8 final[])
+	 *		     int rounds, int bytes, u8 ctr[])
 	 */
 ENTRY(aesbs_ctr_encrypt)
 	mov		ip, sp
 	push		{r4-r10, lr}
 
-	ldm		ip, {r5-r7}		// load args 4-6
-	teq		r7, #0
-	addne		r5, r5, #1		// one extra block if final != 0
-
+	ldm		ip, {r5, r6}		// load args 4-5
 	vld1.8		{q0}, [r6]		// load counter
 	vrev32.8	q1, q0
 	vmov		r9, r10, d3
@@ -792,20 +787,19 @@ ENTRY(aesbs_ctr_encrypt)
 	adc		r7, r7, #0
 
 99:	vmov		q1, q0
+	sub		lr, r5, #1
 	vmov		q2, q0
+	adr		ip, 0f
 	vmov		q3, q0
+	and		lr, lr, #112
 	vmov		q4, q0
+	cmp		r5, #112
 	vmov		q5, q0
+	sub		ip, ip, lr, lsl #1
 	vmov		q6, q0
+	add		ip, ip, lr, lsr #2
 	vmov		q7, q0
-
-	adr		ip, 0f
-	sub		lr, r5, #1
-	and		lr, lr, #7
-	cmp		r5, #8
-	sub		ip, ip, lr, lsl #5
-	sub		ip, ip, lr, lsl #2
-	movlt		pc, ip			// computed goto if blocks < 8
+	movle		pc, ip			// computed goto if bytes < 112
 
 	next_ctr	q1
 	next_ctr	q2
@@ -820,12 +814,14 @@ ENTRY(aesbs_ctr_encrypt)
 	bl		aesbs_encrypt8
 
 	adr		ip, 1f
-	and		lr, r5, #7
-	cmp		r5, #8
-	movgt		r4, #0
-	ldrle		r4, [sp, #40]		// load final in the last round
-	sub		ip, ip, lr, lsl #2
-	movlt		pc, ip			// computed goto if blocks < 8
+	sub		lr, r5, #1
+	cmp		r5, #128
+	bic		lr, lr, #15
+	ands		r4, r5, #15		// preserves C flag
+	teqcs		r5, r5			// set Z flag if not last iteration
+	sub		ip, ip, lr, lsr #2
+	rsb		r4, r4, #16
+	movcc		pc, ip			// computed goto if bytes < 128
 
 	vld1.8		{q8}, [r1]!
 	vld1.8		{q9}, [r1]!
@@ -834,46 +830,70 @@ ENTRY(aesbs_ctr_encrypt)
 	vld1.8		{q12}, [r1]!
 	vld1.8		{q13}, [r1]!
 	vld1.8		{q14}, [r1]!
-	teq		r4, #0			// skip last block if 'final'
-1:	bne		2f
+1:	subne		r1, r1, r4
 	vld1.8		{q15}, [r1]!
 
-2:	adr		ip, 3f
-	cmp		r5, #8
-	sub		ip, ip, lr, lsl #3
-	movlt		pc, ip			// computed goto if blocks < 8
+	add		ip, ip, #2f - 1b
 
 	veor		q0, q0, q8
-	vst1.8		{q0}, [r0]!
 	veor		q1, q1, q9
-	vst1.8		{q1}, [r0]!
 	veor		q4, q4, q10
-	vst1.8		{q4}, [r0]!
 	veor		q6, q6, q11
-	vst1.8		{q6}, [r0]!
 	veor		q3, q3, q12
-	vst1.8		{q3}, [r0]!
 	veor		q7, q7, q13
-	vst1.8		{q7}, [r0]!
 	veor		q2, q2, q14
+	bne		3f
+	veor		q5, q5, q15
+
+	movcc		pc, ip			// computed goto if bytes < 128
+
+	vst1.8		{q0}, [r0]!
+	vst1.8		{q1}, [r0]!
+	vst1.8		{q4}, [r0]!
+	vst1.8		{q6}, [r0]!
+	vst1.8		{q3}, [r0]!
+	vst1.8		{q7}, [r0]!
 	vst1.8		{q2}, [r0]!
-	teq		r4, #0			// skip last block if 'final'
-	W(bne)		5f
-3:	veor		q5, q5, q15
+2:	subne		r0, r0, r4
 	vst1.8		{q5}, [r0]!
 
-4:	next_ctr	q0
+	next_ctr	q0
 
-	subs		r5, r5, #8
+	subs		r5, r5, #128
 	bgt		99b
 
 	vst1.8		{q0}, [r6]
 	pop		{r4-r10, pc}
 
-5:	vst1.8		{q5}, [r4]
-	b		4b
+3:	adr		lr, .Lpermute_table + 16
+	cmp		r5, #16			// Z flag remains cleared
+	sub		lr, lr, r4
+	vld1.8		{q8-q9}, [lr]
+	vtbl.8		d16, {q5}, d16
+	vtbl.8		d17, {q5}, d17
+	veor		q5, q8, q15
+	bcc		4f			// have to reload prev if R5 < 16
+	vtbx.8		d10, {q2}, d18
+	vtbx.8		d11, {q2}, d19
+	mov		pc, ip			// branch back to VST sequence
+
+4:	sub		r0, r0, r4
+	vshr.s8		q9, q9, #7		// create mask for VBIF
+	vld1.8		{q8}, [r0]		// reload
+	vbif		q5, q8, q9
+	vst1.8		{q5}, [r0]
+	pop		{r4-r10, pc}
 ENDPROC(aesbs_ctr_encrypt)
 
+	.align		6
+.Lpermute_table:
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+	.byte		0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+
 	.macro		next_tweak, out, in, const, tmp
 	vshr.s64	\tmp, \in, #63
 	vand		\tmp, \tmp, \const
@@ -888,6 +908,7 @@ ENDPROC(aesbs_ctr_encrypt)
 	 * aesbs_xts_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
 	 *		     int blocks, u8 iv[], int reorder_last_tweak)
 	 */
+	.align		6
 __xts_prepare8:
 	vld1.8		{q14}, [r7]		// load iv
 	vmov.i32	d30, #0x87		// compose tweak mask vector
diff --git a/arch/arm/crypto/aes-neonbs-glue.c b/arch/arm/crypto/aes-neonbs-glue.c
index 5c6cd3c63cbc..f00f042ef357 100644
--- a/arch/arm/crypto/aes-neonbs-glue.c
+++ b/arch/arm/crypto/aes-neonbs-glue.c
@@ -37,7 +37,7 @@ asmlinkage void aesbs_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[],
 				  int rounds, int blocks, u8 iv[]);
 
 asmlinkage void aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[],
-				  int rounds, int blocks, u8 ctr[], u8 final[]);
+				  int rounds, int blocks, u8 ctr[]);
 
 asmlinkage void aesbs_xts_encrypt(u8 out[], u8 const in[], u8 const rk[],
 				  int rounds, int blocks, u8 iv[], int);
@@ -243,32 +243,25 @@ static int ctr_encrypt(struct skcipher_request *req)
 	err = skcipher_walk_virt(&walk, req, false);
 
 	while (walk.nbytes > 0) {
-		unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE;
-		u8 *final = (walk.total % AES_BLOCK_SIZE) ? buf : NULL;
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+		int bytes = walk.nbytes;
 
-		if (walk.nbytes < walk.total) {
-			blocks = round_down(blocks,
-					    walk.stride / AES_BLOCK_SIZE);
-			final = NULL;
-		}
+		if (unlikely(bytes < AES_BLOCK_SIZE))
+			src = dst = memcpy(buf + sizeof(buf) - bytes,
+					   src, bytes);
+		else if (walk.nbytes < walk.total)
+			bytes &= ~(8 * AES_BLOCK_SIZE - 1);
 
 		kernel_neon_begin();
-		aesbs_ctr_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
-				  ctx->rk, ctx->rounds, blocks, walk.iv, final);
+		aesbs_ctr_encrypt(dst, src, ctx->rk, ctx->rounds, bytes, walk.iv);
 		kernel_neon_end();
 
-		if (final) {
-			u8 *dst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
-			u8 *src = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
+		if (unlikely(bytes < AES_BLOCK_SIZE))
+			memcpy(walk.dst.virt.addr,
+			       buf + sizeof(buf) - bytes, bytes);
 
-			crypto_xor_cpy(dst, src, final,
-				       walk.total % AES_BLOCK_SIZE);
-
-			err = skcipher_walk_done(&walk, 0);
-			break;
-		}
-		err = skcipher_walk_done(&walk,
-					 walk.nbytes - blocks * AES_BLOCK_SIZE);
+		err = skcipher_walk_done(&walk, walk.nbytes - bytes);
 	}
 
 	return err;
diff --git a/arch/arm/crypto/blake2b-neon-glue.c b/arch/arm/crypto/blake2b-neon-glue.c
index 34d73200e7fa..4b59d027ba4a 100644
--- a/arch/arm/crypto/blake2b-neon-glue.c
+++ b/arch/arm/crypto/blake2b-neon-glue.c
@@ -85,8 +85,8 @@ static int __init blake2b_neon_mod_init(void)
 
 static void __exit blake2b_neon_mod_exit(void)
 {
-	return crypto_unregister_shashes(blake2b_neon_algs,
-					 ARRAY_SIZE(blake2b_neon_algs));
+	crypto_unregister_shashes(blake2b_neon_algs,
+				  ARRAY_SIZE(blake2b_neon_algs));
 }
 
 module_init(blake2b_neon_mod_init);
diff --git a/arch/arm/crypto/blake2s-core.S b/arch/arm/crypto/blake2s-core.S
index bed897e9a181..df40e46601f1 100644
--- a/arch/arm/crypto/blake2s-core.S
+++ b/arch/arm/crypto/blake2s-core.S
@@ -8,6 +8,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 
 	// Registers used to hold message words temporarily.  There aren't
 	// enough ARM registers to hold the whole message block, so we have to
@@ -38,6 +39,23 @@
 #endif
 .endm
 
+.macro _le32_bswap	a, tmp
+#ifdef __ARMEB__
+	rev_l		\a, \tmp
+#endif
+.endm
+
+.macro _le32_bswap_8x	a, b, c, d, e, f, g, h,  tmp
+	_le32_bswap	\a, \tmp
+	_le32_bswap	\b, \tmp
+	_le32_bswap	\c, \tmp
+	_le32_bswap	\d, \tmp
+	_le32_bswap	\e, \tmp
+	_le32_bswap	\f, \tmp
+	_le32_bswap	\g, \tmp
+	_le32_bswap	\h, \tmp
+.endm
+
 // Execute a quarter-round of BLAKE2s by mixing two columns or two diagonals.
 // (a0, b0, c0, d0) and (a1, b1, c1, d1) give the registers containing the two
 // columns/diagonals.  s0-s1 are the word offsets to the message words the first
@@ -149,8 +167,8 @@
 .endm
 
 //
-// void blake2s_compress_arch(struct blake2s_state *state,
-//			      const u8 *block, size_t nblocks, u32 inc);
+// void blake2s_compress(struct blake2s_state *state,
+//			 const u8 *block, size_t nblocks, u32 inc);
 //
 // Only the first three fields of struct blake2s_state are used:
 //	u32 h[8];	(inout)
@@ -158,7 +176,7 @@
 //	u32 f[2];	(in)
 //
 	.align		5
-ENTRY(blake2s_compress_arch)
+ENTRY(blake2s_compress)
 	push		{r0-r2,r4-r11,lr}	// keep this an even number
 
 .Lnext_block:
@@ -180,8 +198,10 @@ ENTRY(blake2s_compress_arch)
 	tst		r1, #3
 	bne		.Lcopy_block_misaligned
 	ldmia		r1!, {r2-r9}
+	_le32_bswap_8x	r2, r3, r4, r5, r6, r7, r8, r9,  r14
 	stmia		r12!, {r2-r9}
 	ldmia		r1!, {r2-r9}
+	_le32_bswap_8x	r2, r3, r4, r5, r6, r7, r8, r9,  r14
 	stmia		r12, {r2-r9}
 .Lcopy_block_done:
 	str		r1, [sp, #68]		// Update message pointer
@@ -268,6 +288,7 @@ ENTRY(blake2s_compress_arch)
 1:
 #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 	ldr		r3, [r1], #4
+	_le32_bswap	r3, r4
 #else
 	ldrb		r3, [r1, #0]
 	ldrb		r4, [r1, #1]
@@ -282,4 +303,4 @@ ENTRY(blake2s_compress_arch)
 	str		r3, [r12], #4
 	bne		1b
 	b		.Lcopy_block_done
-ENDPROC(blake2s_compress_arch)
+ENDPROC(blake2s_compress)
diff --git a/arch/arm/crypto/blake2s-glue.c b/arch/arm/crypto/blake2s-glue.c
index f2cc1e5fc9ec..0238a70d9581 100644
--- a/arch/arm/crypto/blake2s-glue.c
+++ b/arch/arm/crypto/blake2s-glue.c
@@ -1,78 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * BLAKE2s digest algorithm, ARM scalar implementation
- *
- * Copyright 2020 Google LLC
- */
 
 #include <crypto/internal/blake2s.h>
-#include <crypto/internal/hash.h>
-
 #include <linux/module.h>
 
 /* defined in blake2s-core.S */
-EXPORT_SYMBOL(blake2s_compress_arch);
-
-static int crypto_blake2s_update_arm(struct shash_desc *desc,
-				     const u8 *in, unsigned int inlen)
-{
-	return crypto_blake2s_update(desc, in, inlen, blake2s_compress_arch);
-}
-
-static int crypto_blake2s_final_arm(struct shash_desc *desc, u8 *out)
-{
-	return crypto_blake2s_final(desc, out, blake2s_compress_arch);
-}
-
-#define BLAKE2S_ALG(name, driver_name, digest_size)			\
-	{								\
-		.base.cra_name		= name,				\
-		.base.cra_driver_name	= driver_name,			\
-		.base.cra_priority	= 200,				\
-		.base.cra_flags		= CRYPTO_ALG_OPTIONAL_KEY,	\
-		.base.cra_blocksize	= BLAKE2S_BLOCK_SIZE,		\
-		.base.cra_ctxsize	= sizeof(struct blake2s_tfm_ctx), \
-		.base.cra_module	= THIS_MODULE,			\
-		.digestsize		= digest_size,			\
-		.setkey			= crypto_blake2s_setkey,	\
-		.init			= crypto_blake2s_init,		\
-		.update			= crypto_blake2s_update_arm,	\
-		.final			= crypto_blake2s_final_arm,	\
-		.descsize		= sizeof(struct blake2s_state),	\
-	}
-
-static struct shash_alg blake2s_arm_algs[] = {
-	BLAKE2S_ALG("blake2s-128", "blake2s-128-arm", BLAKE2S_128_HASH_SIZE),
-	BLAKE2S_ALG("blake2s-160", "blake2s-160-arm", BLAKE2S_160_HASH_SIZE),
-	BLAKE2S_ALG("blake2s-224", "blake2s-224-arm", BLAKE2S_224_HASH_SIZE),
-	BLAKE2S_ALG("blake2s-256", "blake2s-256-arm", BLAKE2S_256_HASH_SIZE),
-};
-
-static int __init blake2s_arm_mod_init(void)
-{
-	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
-		crypto_register_shashes(blake2s_arm_algs,
-					ARRAY_SIZE(blake2s_arm_algs)) : 0;
-}
-
-static void __exit blake2s_arm_mod_exit(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_HASH))
-		crypto_unregister_shashes(blake2s_arm_algs,
-					  ARRAY_SIZE(blake2s_arm_algs));
-}
-
-module_init(blake2s_arm_mod_init);
-module_exit(blake2s_arm_mod_exit);
-
-MODULE_DESCRIPTION("BLAKE2s digest algorithm, ARM scalar implementation");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Eric Biggers <ebiggers@google.com>");
-MODULE_ALIAS_CRYPTO("blake2s-128");
-MODULE_ALIAS_CRYPTO("blake2s-128-arm");
-MODULE_ALIAS_CRYPTO("blake2s-160");
-MODULE_ALIAS_CRYPTO("blake2s-160-arm");
-MODULE_ALIAS_CRYPTO("blake2s-224");
-MODULE_ALIAS_CRYPTO("blake2s-224-arm");
-MODULE_ALIAS_CRYPTO("blake2s-256");
-MODULE_ALIAS_CRYPTO("blake2s-256-arm");
+EXPORT_SYMBOL(blake2s_compress);
diff --git a/arch/arm/crypto/chacha-scalar-core.S b/arch/arm/crypto/chacha-scalar-core.S
index 2985b80a45b5..083fe1ab96d0 100644
--- a/arch/arm/crypto/chacha-scalar-core.S
+++ b/arch/arm/crypto/chacha-scalar-core.S
@@ -41,32 +41,15 @@
 	X14	.req	r12
 	X15	.req	r14
 
-.macro __rev		out, in,  t0, t1, t2
-.if __LINUX_ARM_ARCH__ >= 6
-	rev		\out, \in
-.else
-	lsl		\t0, \in, #24
-	and		\t1, \in, #0xff00
-	and		\t2, \in, #0xff0000
-	orr		\out, \t0, \in, lsr #24
-	orr		\out, \out, \t1, lsl #8
-	orr		\out, \out, \t2, lsr #8
-.endif
-.endm
-
-.macro _le32_bswap	x,  t0, t1, t2
+.macro _le32_bswap_4x	a, b, c, d,  tmp
 #ifdef __ARMEB__
-	__rev		\x, \x,  \t0, \t1, \t2
+	rev_l		\a,  \tmp
+	rev_l		\b,  \tmp
+	rev_l		\c,  \tmp
+	rev_l		\d,  \tmp
 #endif
 .endm
 
-.macro _le32_bswap_4x	a, b, c, d,  t0, t1, t2
-	_le32_bswap	\a,  \t0, \t1, \t2
-	_le32_bswap	\b,  \t0, \t1, \t2
-	_le32_bswap	\c,  \t0, \t1, \t2
-	_le32_bswap	\d,  \t0, \t1, \t2
-.endm
-
 .macro __ldrd		a, b, src, offset
 #if __LINUX_ARM_ARCH__ >= 6
 	ldrd		\a, \b, [\src, #\offset]
@@ -200,7 +183,7 @@
 	add		X1, X1, r9
 	add		X2, X2, r10
 	add		X3, X3, r11
-	_le32_bswap_4x	X0, X1, X2, X3,  r8, r9, r10
+	_le32_bswap_4x	X0, X1, X2, X3,  r8
 	ldmia		r12!, {r8-r11}
 	eor		X0, X0, r8
 	eor		X1, X1, r9
@@ -216,7 +199,7 @@
 	ldmia		r12!, {X0-X3}
 	add		X6, r10, X6, ror #brot
 	add		X7, r11, X7, ror #brot
-	_le32_bswap_4x	X4, X5, X6, X7,  r8, r9, r10
+	_le32_bswap_4x	X4, X5, X6, X7,  r8
 	eor		X4, X4, X0
 	eor		X5, X5, X1
 	eor		X6, X6, X2
@@ -231,7 +214,7 @@
 	add		r1, r1, r9		// x9
 	add		r6, r6, r10		// x10
 	add		r7, r7, r11		// x11
-	_le32_bswap_4x	r0, r1, r6, r7,  r8, r9, r10
+	_le32_bswap_4x	r0, r1, r6, r7,  r8
 	ldmia		r12!, {r8-r11}
 	eor		r0, r0, r8		// x8
 	eor		r1, r1, r9		// x9
@@ -245,7 +228,7 @@
 	add		r3, r9, r3, ror #drot	// x13
 	add		r4, r10, r4, ror #drot	// x14
 	add		r5, r11, r5, ror #drot	// x15
-	_le32_bswap_4x	r2, r3, r4, r5,  r9, r10, r11
+	_le32_bswap_4x	r2, r3, r4, r5,  r9
 	  ldr		r9, [sp, #72]		// load LEN
 	eor		r2, r2, r0		// x12
 	eor		r3, r3, r1		// x13
@@ -301,7 +284,7 @@
 	add		X1, X1, r9
 	add		X2, X2, r10
 	add		X3, X3, r11
-	_le32_bswap_4x	X0, X1, X2, X3,  r8, r9, r10
+	_le32_bswap_4x	X0, X1, X2, X3,  r8
 	stmia		r14!, {X0-X3}
 
 	// Save keystream for x4-x7
@@ -311,7 +294,7 @@
 	add		X5, r9, X5, ror #brot
 	add		X6, r10, X6, ror #brot
 	add		X7, r11, X7, ror #brot
-	_le32_bswap_4x	X4, X5, X6, X7,  r8, r9, r10
+	_le32_bswap_4x	X4, X5, X6, X7,  r8
 	  add		r8, sp, #64
 	stmia		r14!, {X4-X7}
 
@@ -323,7 +306,7 @@
 	add		r1, r1, r9		// x9
 	add		r6, r6, r10		// x10
 	add		r7, r7, r11		// x11
-	_le32_bswap_4x	r0, r1, r6, r7,  r8, r9, r10
+	_le32_bswap_4x	r0, r1, r6, r7,  r8
 	stmia		r14!, {r0,r1,r6,r7}
 	__ldrd		r8, r9, sp, 144
 	__ldrd		r10, r11, sp, 152
@@ -331,7 +314,7 @@
 	add		r3, r9, r3, ror #drot	// x13
 	add		r4, r10, r4, ror #drot	// x14
 	add		r5, r11, r5, ror #drot	// x15
-	_le32_bswap_4x	r2, r3, r4, r5,  r9, r10, r11
+	_le32_bswap_4x	r2, r3, r4, r5,  r9
 	stmia		r14, {r2-r5}
 
 	// Stack: ks0-ks15 unused0-unused7 x0-x15 OUT IN LEN
diff --git a/arch/arm/crypto/curve25519-core.S b/arch/arm/crypto/curve25519-core.S
index be18af52e7dc..b697fa5d059a 100644
--- a/arch/arm/crypto/curve25519-core.S
+++ b/arch/arm/crypto/curve25519-core.S
@@ -10,8 +10,8 @@
 #include <linux/linkage.h>
 
 .text
-.fpu neon
 .arch armv7-a
+.fpu neon
 .align 4
 
 ENTRY(curve25519_neon)
diff --git a/arch/arm/crypto/curve25519-glue.c b/arch/arm/crypto/curve25519-glue.c
index 31eb75b6002f..9bdafd57888c 100644
--- a/arch/arm/crypto/curve25519-glue.c
+++ b/arch/arm/crypto/curve25519-glue.c
@@ -112,7 +112,7 @@ static struct kpp_alg curve25519_alg = {
 	.max_size		= curve25519_max_size,
 };
 
-static int __init mod_init(void)
+static int __init arm_curve25519_init(void)
 {
 	if (elf_hwcap & HWCAP_NEON) {
 		static_branch_enable(&have_neon);
@@ -122,14 +122,14 @@ static int __init mod_init(void)
 	return 0;
 }
 
-static void __exit mod_exit(void)
+static void __exit arm_curve25519_exit(void)
 {
 	if (IS_REACHABLE(CONFIG_CRYPTO_KPP) && elf_hwcap & HWCAP_NEON)
 		crypto_unregister_kpp(&curve25519_alg);
 }
 
-module_init(mod_init);
-module_exit(mod_exit);
+module_init(arm_curve25519_init);
+module_exit(arm_curve25519_exit);
 
 MODULE_ALIAS_CRYPTO("curve25519");
 MODULE_ALIAS_CRYPTO("curve25519-neon");
diff --git a/arch/arm/crypto/ghash-ce-core.S b/arch/arm/crypto/ghash-ce-core.S
index 9f51e3fa4526..858c0d66798b 100644
--- a/arch/arm/crypto/ghash-ce-core.S
+++ b/arch/arm/crypto/ghash-ce-core.S
@@ -2,7 +2,8 @@
 /*
  * Accelerated GHASH implementation with NEON/ARMv8 vmull.p8/64 instructions.
  *
- * Copyright (C) 2015 - 2017 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ * Copyright (C) 2015 - 2017 Linaro Ltd.
+ * Copyright (C) 2023 Google LLC. <ardb@google.com>
  */
 
 #include <linux/linkage.h>
@@ -44,7 +45,7 @@
 	t2q		.req	q7
 	t3q		.req	q8
 	t4q		.req	q9
-	T2		.req	q9
+	XH2		.req	q9
 
 	s1l		.req	d20
 	s1h		.req	d21
@@ -80,7 +81,7 @@
 
 	XL2		.req	q5
 	XM2		.req	q6
-	XH2		.req	q7
+	T2		.req	q7
 	T3		.req	q8
 
 	XL2_L		.req	d10
@@ -192,9 +193,10 @@
 	vshr.u64	XL, XL, #1
 	.endm
 
-	.macro		ghash_update, pn
+	.macro		ghash_update, pn, enc, aggregate=1, head=1
 	vld1.64		{XL}, [r1]
 
+	.if		\head
 	/* do the head block first, if supplied */
 	ldr		ip, [sp]
 	teq		ip, #0
@@ -202,13 +204,32 @@
 	vld1.64		{T1}, [ip]
 	teq		r0, #0
 	b		3f
+	.endif
 
 0:	.ifc		\pn, p64
+	.if		\aggregate
 	tst		r0, #3			// skip until #blocks is a
 	bne		2f			// round multiple of 4
 
 	vld1.8		{XL2-XM2}, [r2]!
-1:	vld1.8		{T3-T2}, [r2]!
+1:	vld1.8		{T2-T3}, [r2]!
+
+	.ifnb		\enc
+	\enc\()_4x	XL2, XM2, T2, T3
+
+	add		ip, r3, #16
+	vld1.64		{HH}, [ip, :128]!
+	vld1.64		{HH3-HH4}, [ip, :128]
+
+	veor		SHASH2_p64, SHASH_L, SHASH_H
+	veor		SHASH2_H, HH_L, HH_H
+	veor		HH34_L, HH3_L, HH3_H
+	veor		HH34_H, HH4_L, HH4_H
+
+	vmov.i8		MASK, #0xe1
+	vshl.u64	MASK, MASK, #57
+	.endif
+
 	vrev64.8	XL2, XL2
 	vrev64.8	XM2, XM2
 
@@ -218,8 +239,8 @@
 	veor		XL2_H, XL2_H, XL_L
 	veor		XL, XL, T1
 
-	vrev64.8	T3, T3
-	vrev64.8	T1, T2
+	vrev64.8	T1, T3
+	vrev64.8	T3, T2
 
 	vmull.p64	XH, HH4_H, XL_H			// a1 * b1
 	veor		XL2_H, XL2_H, XL_H
@@ -267,14 +288,22 @@
 
 	b		1b
 	.endif
+	.endif
+
+2:	vld1.8		{T1}, [r2]!
+
+	.ifnb		\enc
+	\enc\()_1x	T1
+	veor		SHASH2_p64, SHASH_L, SHASH_H
+	vmov.i8		MASK, #0xe1
+	vshl.u64	MASK, MASK, #57
+	.endif
 
-2:	vld1.64		{T1}, [r2]!
 	subs		r0, r0, #1
 
 3:	/* multiply XL by SHASH in GF(2^128) */
-#ifndef CONFIG_CPU_BIG_ENDIAN
 	vrev64.8	T1, T1
-#endif
+
 	vext.8		IN1, T1, T1, #8
 	veor		T1_L, T1_L, XL_H
 	veor		XL, XL, IN1
@@ -293,9 +322,6 @@
 	veor		XL, XL, T1
 
 	bne		0b
-
-	vst1.64		{XL}, [r1]
-	bx		lr
 	.endm
 
 	/*
@@ -316,6 +342,9 @@ ENTRY(pmull_ghash_update_p64)
 	vshl.u64	MASK, MASK, #57
 
 	ghash_update	p64
+	vst1.64		{XL}, [r1]
+
+	bx		lr
 ENDPROC(pmull_ghash_update_p64)
 
 ENTRY(pmull_ghash_update_p8)
@@ -336,4 +365,331 @@ ENTRY(pmull_ghash_update_p8)
 	vmov.i64	k48, #0xffffffffffff
 
 	ghash_update	p8
+	vst1.64		{XL}, [r1]
+
+	bx		lr
 ENDPROC(pmull_ghash_update_p8)
+
+	e0		.req	q9
+	e1		.req	q10
+	e2		.req	q11
+	e3		.req	q12
+	e0l		.req	d18
+	e0h		.req	d19
+	e2l		.req	d22
+	e2h		.req	d23
+	e3l		.req	d24
+	e3h		.req	d25
+	ctr		.req	q13
+	ctr0		.req	d26
+	ctr1		.req	d27
+
+	ek0		.req	q14
+	ek1		.req	q15
+
+	.macro		round, rk:req, regs:vararg
+	.irp		r, \regs
+	aese.8		\r, \rk
+	aesmc.8		\r, \r
+	.endr
+	.endm
+
+	.macro		aes_encrypt, rkp, rounds, regs:vararg
+	vld1.8		{ek0-ek1}, [\rkp, :128]!
+	cmp		\rounds, #12
+	blt		.L\@			// AES-128
+
+	round		ek0, \regs
+	vld1.8		{ek0}, [\rkp, :128]!
+	round		ek1, \regs
+	vld1.8		{ek1}, [\rkp, :128]!
+
+	beq		.L\@			// AES-192
+
+	round		ek0, \regs
+	vld1.8		{ek0}, [\rkp, :128]!
+	round		ek1, \regs
+	vld1.8		{ek1}, [\rkp, :128]!
+
+.L\@:	.rept		4
+	round		ek0, \regs
+	vld1.8		{ek0}, [\rkp, :128]!
+	round		ek1, \regs
+	vld1.8		{ek1}, [\rkp, :128]!
+	.endr
+
+	round		ek0, \regs
+	vld1.8		{ek0}, [\rkp, :128]
+
+	.irp		r, \regs
+	aese.8		\r, ek1
+	.endr
+	.irp		r, \regs
+	veor		\r, \r, ek0
+	.endr
+	.endm
+
+pmull_aes_encrypt:
+	add		ip, r5, #4
+	vld1.8		{ctr0}, [r5]		// load 12 byte IV
+	vld1.8		{ctr1}, [ip]
+	rev		r8, r7
+	vext.8		ctr1, ctr1, ctr1, #4
+	add		r7, r7, #1
+	vmov.32		ctr1[1], r8
+	vmov		e0, ctr
+
+	add		ip, r3, #64
+	aes_encrypt	ip, r6, e0
+	bx		lr
+ENDPROC(pmull_aes_encrypt)
+
+pmull_aes_encrypt_4x:
+	add		ip, r5, #4
+	vld1.8		{ctr0}, [r5]
+	vld1.8		{ctr1}, [ip]
+	rev		r8, r7
+	vext.8		ctr1, ctr1, ctr1, #4
+	add		r7, r7, #1
+	vmov.32		ctr1[1], r8
+	rev		ip, r7
+	vmov		e0, ctr
+	add		r7, r7, #1
+	vmov.32		ctr1[1], ip
+	rev		r8, r7
+	vmov		e1, ctr
+	add		r7, r7, #1
+	vmov.32		ctr1[1], r8
+	rev		ip, r7
+	vmov		e2, ctr
+	add		r7, r7, #1
+	vmov.32		ctr1[1], ip
+	vmov		e3, ctr
+
+	add		ip, r3, #64
+	aes_encrypt	ip, r6, e0, e1, e2, e3
+	bx		lr
+ENDPROC(pmull_aes_encrypt_4x)
+
+pmull_aes_encrypt_final:
+	add		ip, r5, #4
+	vld1.8		{ctr0}, [r5]
+	vld1.8		{ctr1}, [ip]
+	rev		r8, r7
+	vext.8		ctr1, ctr1, ctr1, #4
+	mov		r7, #1 << 24		// BE #1 for the tag
+	vmov.32		ctr1[1], r8
+	vmov		e0, ctr
+	vmov.32		ctr1[1], r7
+	vmov		e1, ctr
+
+	add		ip, r3, #64
+	aes_encrypt	ip, r6, e0, e1
+	bx		lr
+ENDPROC(pmull_aes_encrypt_final)
+
+	.macro		enc_1x, in0
+	bl		pmull_aes_encrypt
+	veor		\in0, \in0, e0
+	vst1.8		{\in0}, [r4]!
+	.endm
+
+	.macro		dec_1x, in0
+	bl		pmull_aes_encrypt
+	veor		e0, e0, \in0
+	vst1.8		{e0}, [r4]!
+	.endm
+
+	.macro		enc_4x, in0, in1, in2, in3
+	bl		pmull_aes_encrypt_4x
+
+	veor		\in0, \in0, e0
+	veor		\in1, \in1, e1
+	veor		\in2, \in2, e2
+	veor		\in3, \in3, e3
+
+	vst1.8		{\in0-\in1}, [r4]!
+	vst1.8		{\in2-\in3}, [r4]!
+	.endm
+
+	.macro		dec_4x, in0, in1, in2, in3
+	bl		pmull_aes_encrypt_4x
+
+	veor		e0, e0, \in0
+	veor		e1, e1, \in1
+	veor		e2, e2, \in2
+	veor		e3, e3, \in3
+
+	vst1.8		{e0-e1}, [r4]!
+	vst1.8		{e2-e3}, [r4]!
+	.endm
+
+	/*
+	 * void pmull_gcm_encrypt(int blocks, u64 dg[], const char *src,
+	 *			  struct gcm_key const *k, char *dst,
+	 *			  char *iv, int rounds, u32 counter)
+	 */
+ENTRY(pmull_gcm_encrypt)
+	push		{r4-r8, lr}
+	ldrd		r4, r5, [sp, #24]
+	ldrd		r6, r7, [sp, #32]
+
+	vld1.64		{SHASH}, [r3]
+
+	ghash_update	p64, enc, head=0
+	vst1.64		{XL}, [r1]
+
+	pop		{r4-r8, pc}
+ENDPROC(pmull_gcm_encrypt)
+
+	/*
+	 * void pmull_gcm_decrypt(int blocks, u64 dg[], const char *src,
+	 *			  struct gcm_key const *k, char *dst,
+	 *			  char *iv, int rounds, u32 counter)
+	 */
+ENTRY(pmull_gcm_decrypt)
+	push		{r4-r8, lr}
+	ldrd		r4, r5, [sp, #24]
+	ldrd		r6, r7, [sp, #32]
+
+	vld1.64		{SHASH}, [r3]
+
+	ghash_update	p64, dec, head=0
+	vst1.64		{XL}, [r1]
+
+	pop		{r4-r8, pc}
+ENDPROC(pmull_gcm_decrypt)
+
+	/*
+	 * void pmull_gcm_enc_final(int bytes, u64 dg[], char *tag,
+	 *			    struct gcm_key const *k, char *head,
+	 *			    char *iv, int rounds, u32 counter)
+	 */
+ENTRY(pmull_gcm_enc_final)
+	push		{r4-r8, lr}
+	ldrd		r4, r5, [sp, #24]
+	ldrd		r6, r7, [sp, #32]
+
+	bl		pmull_aes_encrypt_final
+
+	cmp		r0, #0
+	beq		.Lenc_final
+
+	mov_l		ip, .Lpermute
+	sub		r4, r4, #16
+	add		r8, ip, r0
+	add		ip, ip, #32
+	add		r4, r4, r0
+	sub		ip, ip, r0
+
+	vld1.8		{e3}, [r8]		// permute vector for key stream
+	vld1.8		{e2}, [ip]		// permute vector for ghash input
+
+	vtbl.8		e3l, {e0}, e3l
+	vtbl.8		e3h, {e0}, e3h
+
+	vld1.8		{e0}, [r4]		// encrypt tail block
+	veor		e0, e0, e3
+	vst1.8		{e0}, [r4]
+
+	vtbl.8		T1_L, {e0}, e2l
+	vtbl.8		T1_H, {e0}, e2h
+
+	vld1.64		{XL}, [r1]
+.Lenc_final:
+	vld1.64		{SHASH}, [r3, :128]
+	vmov.i8		MASK, #0xe1
+	veor		SHASH2_p64, SHASH_L, SHASH_H
+	vshl.u64	MASK, MASK, #57
+	mov		r0, #1
+	bne		3f			// process head block first
+	ghash_update	p64, aggregate=0, head=0
+
+	vrev64.8	XL, XL
+	vext.8		XL, XL, XL, #8
+	veor		XL, XL, e1
+
+	sub		r2, r2, #16		// rewind src pointer
+	vst1.8		{XL}, [r2]		// store tag
+
+	pop		{r4-r8, pc}
+ENDPROC(pmull_gcm_enc_final)
+
+	/*
+	 * int pmull_gcm_dec_final(int bytes, u64 dg[], char *tag,
+	 *			   struct gcm_key const *k, char *head,
+	 *			   char *iv, int rounds, u32 counter,
+	 *			   const char *otag, int authsize)
+	 */
+ENTRY(pmull_gcm_dec_final)
+	push		{r4-r8, lr}
+	ldrd		r4, r5, [sp, #24]
+	ldrd		r6, r7, [sp, #32]
+
+	bl		pmull_aes_encrypt_final
+
+	cmp		r0, #0
+	beq		.Ldec_final
+
+	mov_l		ip, .Lpermute
+	sub		r4, r4, #16
+	add		r8, ip, r0
+	add		ip, ip, #32
+	add		r4, r4, r0
+	sub		ip, ip, r0
+
+	vld1.8		{e3}, [r8]		// permute vector for key stream
+	vld1.8		{e2}, [ip]		// permute vector for ghash input
+
+	vtbl.8		e3l, {e0}, e3l
+	vtbl.8		e3h, {e0}, e3h
+
+	vld1.8		{e0}, [r4]
+
+	vtbl.8		T1_L, {e0}, e2l
+	vtbl.8		T1_H, {e0}, e2h
+
+	veor		e0, e0, e3
+	vst1.8		{e0}, [r4]
+
+	vld1.64		{XL}, [r1]
+.Ldec_final:
+	vld1.64		{SHASH}, [r3]
+	vmov.i8		MASK, #0xe1
+	veor		SHASH2_p64, SHASH_L, SHASH_H
+	vshl.u64	MASK, MASK, #57
+	mov		r0, #1
+	bne		3f			// process head block first
+	ghash_update	p64, aggregate=0, head=0
+
+	vrev64.8	XL, XL
+	vext.8		XL, XL, XL, #8
+	veor		XL, XL, e1
+
+	mov_l		ip, .Lpermute
+	ldrd		r2, r3, [sp, #40]	// otag and authsize
+	vld1.8		{T1}, [r2]
+	add		ip, ip, r3
+	vceq.i8		T1, T1, XL		// compare tags
+	vmvn		T1, T1			// 0 for eq, -1 for ne
+
+	vld1.8		{e0}, [ip]
+	vtbl.8		XL_L, {T1}, e0l		// keep authsize bytes only
+	vtbl.8		XL_H, {T1}, e0h
+
+	vpmin.s8	XL_L, XL_L, XL_H	// take the minimum s8 across the vector
+	vpmin.s8	XL_L, XL_L, XL_L
+	vmov.32		r0, XL_L[0]		// fail if != 0x0
+
+	pop		{r4-r8, pc}
+ENDPROC(pmull_gcm_dec_final)
+
+	.section	".rodata", "a", %progbits
+	.align		5
+.Lpermute:
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+	.byte		0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
diff --git a/arch/arm/crypto/ghash-ce-glue.c b/arch/arm/crypto/ghash-ce-glue.c
index f13401f3e669..3ddf05b4234d 100644
--- a/arch/arm/crypto/ghash-ce-glue.c
+++ b/arch/arm/crypto/ghash-ce-glue.c
@@ -2,36 +2,53 @@
 /*
  * Accelerated GHASH implementation with ARMv8 vmull.p64 instructions.
  *
- * Copyright (C) 2015 - 2018 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ * Copyright (C) 2015 - 2018 Linaro Ltd.
+ * Copyright (C) 2023 Google LLC.
  */
 
 #include <asm/hwcap.h>
 #include <asm/neon.h>
 #include <asm/simd.h>
 #include <asm/unaligned.h>
+#include <crypto/aes.h>
+#include <crypto/gcm.h>
 #include <crypto/b128ops.h>
 #include <crypto/cryptd.h>
+#include <crypto/internal/aead.h>
 #include <crypto/internal/hash.h>
 #include <crypto/internal/simd.h>
+#include <crypto/internal/skcipher.h>
 #include <crypto/gf128mul.h>
+#include <crypto/scatterwalk.h>
 #include <linux/cpufeature.h>
 #include <linux/crypto.h>
 #include <linux/jump_label.h>
 #include <linux/module.h>
 
 MODULE_DESCRIPTION("GHASH hash function using ARMv8 Crypto Extensions");
-MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
-MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ard Biesheuvel <ardb@kernel.org>");
+MODULE_LICENSE("GPL");
 MODULE_ALIAS_CRYPTO("ghash");
+MODULE_ALIAS_CRYPTO("gcm(aes)");
+MODULE_ALIAS_CRYPTO("rfc4106(gcm(aes))");
 
 #define GHASH_BLOCK_SIZE	16
 #define GHASH_DIGEST_SIZE	16
 
+#define RFC4106_NONCE_SIZE	4
+
 struct ghash_key {
 	be128	k;
 	u64	h[][2];
 };
 
+struct gcm_key {
+	u64	h[4][2];
+	u32	rk[AES_MAX_KEYLENGTH_U32];
+	int	rounds;
+	u8	nonce[];	// for RFC4106 nonce
+};
+
 struct ghash_desc_ctx {
 	u64 digest[GHASH_DIGEST_SIZE/sizeof(u64)];
 	u8 buf[GHASH_BLOCK_SIZE];
@@ -344,6 +361,393 @@ static struct ahash_alg ghash_async_alg = {
 	},
 };
 
+
+void pmull_gcm_encrypt(int blocks, u64 dg[], const char *src,
+		       struct gcm_key const *k, char *dst,
+		       const char *iv, int rounds, u32 counter);
+
+void pmull_gcm_enc_final(int blocks, u64 dg[], char *tag,
+			 struct gcm_key const *k, char *head,
+			 const char *iv, int rounds, u32 counter);
+
+void pmull_gcm_decrypt(int bytes, u64 dg[], const char *src,
+		       struct gcm_key const *k, char *dst,
+		       const char *iv, int rounds, u32 counter);
+
+int pmull_gcm_dec_final(int bytes, u64 dg[], char *tag,
+			struct gcm_key const *k, char *head,
+			const char *iv, int rounds, u32 counter,
+			const char *otag, int authsize);
+
+static int gcm_aes_setkey(struct crypto_aead *tfm, const u8 *inkey,
+			  unsigned int keylen)
+{
+	struct gcm_key *ctx = crypto_aead_ctx(tfm);
+	struct crypto_aes_ctx aes_ctx;
+	be128 h, k;
+	int ret;
+
+	ret = aes_expandkey(&aes_ctx, inkey, keylen);
+	if (ret)
+		return -EINVAL;
+
+	aes_encrypt(&aes_ctx, (u8 *)&k, (u8[AES_BLOCK_SIZE]){});
+
+	memcpy(ctx->rk, aes_ctx.key_enc, sizeof(ctx->rk));
+	ctx->rounds = 6 + keylen / 4;
+
+	memzero_explicit(&aes_ctx, sizeof(aes_ctx));
+
+	ghash_reflect(ctx->h[0], &k);
+
+	h = k;
+	gf128mul_lle(&h, &k);
+	ghash_reflect(ctx->h[1], &h);
+
+	gf128mul_lle(&h, &k);
+	ghash_reflect(ctx->h[2], &h);
+
+	gf128mul_lle(&h, &k);
+	ghash_reflect(ctx->h[3], &h);
+
+	return 0;
+}
+
+static int gcm_aes_setauthsize(struct crypto_aead *tfm, unsigned int authsize)
+{
+	return crypto_gcm_check_authsize(authsize);
+}
+
+static void gcm_update_mac(u64 dg[], const u8 *src, int count, u8 buf[],
+			   int *buf_count, struct gcm_key *ctx)
+{
+	if (*buf_count > 0) {
+		int buf_added = min(count, GHASH_BLOCK_SIZE - *buf_count);
+
+		memcpy(&buf[*buf_count], src, buf_added);
+
+		*buf_count += buf_added;
+		src += buf_added;
+		count -= buf_added;
+	}
+
+	if (count >= GHASH_BLOCK_SIZE || *buf_count == GHASH_BLOCK_SIZE) {
+		int blocks = count / GHASH_BLOCK_SIZE;
+
+		pmull_ghash_update_p64(blocks, dg, src, ctx->h,
+				       *buf_count ? buf : NULL);
+
+		src += blocks * GHASH_BLOCK_SIZE;
+		count %= GHASH_BLOCK_SIZE;
+		*buf_count = 0;
+	}
+
+	if (count > 0) {
+		memcpy(buf, src, count);
+		*buf_count = count;
+	}
+}
+
+static void gcm_calculate_auth_mac(struct aead_request *req, u64 dg[], u32 len)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct gcm_key *ctx = crypto_aead_ctx(aead);
+	u8 buf[GHASH_BLOCK_SIZE];
+	struct scatter_walk walk;
+	int buf_count = 0;
+
+	scatterwalk_start(&walk, req->src);
+
+	do {
+		u32 n = scatterwalk_clamp(&walk, len);
+		u8 *p;
+
+		if (!n) {
+			scatterwalk_start(&walk, sg_next(walk.sg));
+			n = scatterwalk_clamp(&walk, len);
+		}
+
+		p = scatterwalk_map(&walk);
+		gcm_update_mac(dg, p, n, buf, &buf_count, ctx);
+		scatterwalk_unmap(p);
+
+		if (unlikely(len / SZ_4K > (len - n) / SZ_4K)) {
+			kernel_neon_end();
+			kernel_neon_begin();
+		}
+
+		len -= n;
+		scatterwalk_advance(&walk, n);
+		scatterwalk_done(&walk, 0, len);
+	} while (len);
+
+	if (buf_count) {
+		memset(&buf[buf_count], 0, GHASH_BLOCK_SIZE - buf_count);
+		pmull_ghash_update_p64(1, dg, buf, ctx->h, NULL);
+	}
+}
+
+static int gcm_encrypt(struct aead_request *req, const u8 *iv, u32 assoclen)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct gcm_key *ctx = crypto_aead_ctx(aead);
+	struct skcipher_walk walk;
+	u8 buf[AES_BLOCK_SIZE];
+	u32 counter = 2;
+	u64 dg[2] = {};
+	be128 lengths;
+	const u8 *src;
+	u8 *tag, *dst;
+	int tail, err;
+
+	if (WARN_ON_ONCE(!may_use_simd()))
+		return -EBUSY;
+
+	err = skcipher_walk_aead_encrypt(&walk, req, false);
+
+	kernel_neon_begin();
+
+	if (assoclen)
+		gcm_calculate_auth_mac(req, dg, assoclen);
+
+	src = walk.src.virt.addr;
+	dst = walk.dst.virt.addr;
+
+	while (walk.nbytes >= AES_BLOCK_SIZE) {
+		int nblocks = walk.nbytes / AES_BLOCK_SIZE;
+
+		pmull_gcm_encrypt(nblocks, dg, src, ctx, dst, iv,
+				  ctx->rounds, counter);
+		counter += nblocks;
+
+		if (walk.nbytes == walk.total) {
+			src += nblocks * AES_BLOCK_SIZE;
+			dst += nblocks * AES_BLOCK_SIZE;
+			break;
+		}
+
+		kernel_neon_end();
+
+		err = skcipher_walk_done(&walk,
+					 walk.nbytes % AES_BLOCK_SIZE);
+		if (err)
+			return err;
+
+		src = walk.src.virt.addr;
+		dst = walk.dst.virt.addr;
+
+		kernel_neon_begin();
+	}
+
+
+	lengths.a = cpu_to_be64(assoclen * 8);
+	lengths.b = cpu_to_be64(req->cryptlen * 8);
+
+	tag = (u8 *)&lengths;
+	tail = walk.nbytes % AES_BLOCK_SIZE;
+
+	/*
+	 * Bounce via a buffer unless we are encrypting in place and src/dst
+	 * are not pointing to the start of the walk buffer. In that case, we
+	 * can do a NEON load/xor/store sequence in place as long as we move
+	 * the plain/ciphertext and keystream to the start of the register. If
+	 * not, do a memcpy() to the end of the buffer so we can reuse the same
+	 * logic.
+	 */
+	if (unlikely(tail && (tail == walk.nbytes || src != dst)))
+		src = memcpy(buf + sizeof(buf) - tail, src, tail);
+
+	pmull_gcm_enc_final(tail, dg, tag, ctx, (u8 *)src, iv,
+			    ctx->rounds, counter);
+	kernel_neon_end();
+
+	if (unlikely(tail && src != dst))
+		memcpy(dst, src, tail);
+
+	if (walk.nbytes) {
+		err = skcipher_walk_done(&walk, 0);
+		if (err)
+			return err;
+	}
+
+	/* copy authtag to end of dst */
+	scatterwalk_map_and_copy(tag, req->dst, req->assoclen + req->cryptlen,
+				 crypto_aead_authsize(aead), 1);
+
+	return 0;
+}
+
+static int gcm_decrypt(struct aead_request *req, const u8 *iv, u32 assoclen)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct gcm_key *ctx = crypto_aead_ctx(aead);
+	int authsize = crypto_aead_authsize(aead);
+	struct skcipher_walk walk;
+	u8 otag[AES_BLOCK_SIZE];
+	u8 buf[AES_BLOCK_SIZE];
+	u32 counter = 2;
+	u64 dg[2] = {};
+	be128 lengths;
+	const u8 *src;
+	u8 *tag, *dst;
+	int tail, err, ret;
+
+	if (WARN_ON_ONCE(!may_use_simd()))
+		return -EBUSY;
+
+	scatterwalk_map_and_copy(otag, req->src,
+				 req->assoclen + req->cryptlen - authsize,
+				 authsize, 0);
+
+	err = skcipher_walk_aead_decrypt(&walk, req, false);
+
+	kernel_neon_begin();
+
+	if (assoclen)
+		gcm_calculate_auth_mac(req, dg, assoclen);
+
+	src = walk.src.virt.addr;
+	dst = walk.dst.virt.addr;
+
+	while (walk.nbytes >= AES_BLOCK_SIZE) {
+		int nblocks = walk.nbytes / AES_BLOCK_SIZE;
+
+		pmull_gcm_decrypt(nblocks, dg, src, ctx, dst, iv,
+				  ctx->rounds, counter);
+		counter += nblocks;
+
+		if (walk.nbytes == walk.total) {
+			src += nblocks * AES_BLOCK_SIZE;
+			dst += nblocks * AES_BLOCK_SIZE;
+			break;
+		}
+
+		kernel_neon_end();
+
+		err = skcipher_walk_done(&walk,
+					 walk.nbytes % AES_BLOCK_SIZE);
+		if (err)
+			return err;
+
+		src = walk.src.virt.addr;
+		dst = walk.dst.virt.addr;
+
+		kernel_neon_begin();
+	}
+
+	lengths.a = cpu_to_be64(assoclen * 8);
+	lengths.b = cpu_to_be64((req->cryptlen - authsize) * 8);
+
+	tag = (u8 *)&lengths;
+	tail = walk.nbytes % AES_BLOCK_SIZE;
+
+	if (unlikely(tail && (tail == walk.nbytes || src != dst)))
+		src = memcpy(buf + sizeof(buf) - tail, src, tail);
+
+	ret = pmull_gcm_dec_final(tail, dg, tag, ctx, (u8 *)src, iv,
+				  ctx->rounds, counter, otag, authsize);
+	kernel_neon_end();
+
+	if (unlikely(tail && src != dst))
+		memcpy(dst, src, tail);
+
+	if (walk.nbytes) {
+		err = skcipher_walk_done(&walk, 0);
+		if (err)
+			return err;
+	}
+
+	return ret ? -EBADMSG : 0;
+}
+
+static int gcm_aes_encrypt(struct aead_request *req)
+{
+	return gcm_encrypt(req, req->iv, req->assoclen);
+}
+
+static int gcm_aes_decrypt(struct aead_request *req)
+{
+	return gcm_decrypt(req, req->iv, req->assoclen);
+}
+
+static int rfc4106_setkey(struct crypto_aead *tfm, const u8 *inkey,
+			  unsigned int keylen)
+{
+	struct gcm_key *ctx = crypto_aead_ctx(tfm);
+	int err;
+
+	keylen -= RFC4106_NONCE_SIZE;
+	err = gcm_aes_setkey(tfm, inkey, keylen);
+	if (err)
+		return err;
+
+	memcpy(ctx->nonce, inkey + keylen, RFC4106_NONCE_SIZE);
+	return 0;
+}
+
+static int rfc4106_setauthsize(struct crypto_aead *tfm, unsigned int authsize)
+{
+	return crypto_rfc4106_check_authsize(authsize);
+}
+
+static int rfc4106_encrypt(struct aead_request *req)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct gcm_key *ctx = crypto_aead_ctx(aead);
+	u8 iv[GCM_AES_IV_SIZE];
+
+	memcpy(iv, ctx->nonce, RFC4106_NONCE_SIZE);
+	memcpy(iv + RFC4106_NONCE_SIZE, req->iv, GCM_RFC4106_IV_SIZE);
+
+	return crypto_ipsec_check_assoclen(req->assoclen) ?:
+	       gcm_encrypt(req, iv, req->assoclen - GCM_RFC4106_IV_SIZE);
+}
+
+static int rfc4106_decrypt(struct aead_request *req)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct gcm_key *ctx = crypto_aead_ctx(aead);
+	u8 iv[GCM_AES_IV_SIZE];
+
+	memcpy(iv, ctx->nonce, RFC4106_NONCE_SIZE);
+	memcpy(iv + RFC4106_NONCE_SIZE, req->iv, GCM_RFC4106_IV_SIZE);
+
+	return crypto_ipsec_check_assoclen(req->assoclen) ?:
+	       gcm_decrypt(req, iv, req->assoclen - GCM_RFC4106_IV_SIZE);
+}
+
+static struct aead_alg gcm_aes_algs[] = {{
+	.ivsize			= GCM_AES_IV_SIZE,
+	.chunksize		= AES_BLOCK_SIZE,
+	.maxauthsize		= AES_BLOCK_SIZE,
+	.setkey			= gcm_aes_setkey,
+	.setauthsize		= gcm_aes_setauthsize,
+	.encrypt		= gcm_aes_encrypt,
+	.decrypt		= gcm_aes_decrypt,
+
+	.base.cra_name		= "gcm(aes)",
+	.base.cra_driver_name	= "gcm-aes-ce",
+	.base.cra_priority	= 400,
+	.base.cra_blocksize	= 1,
+	.base.cra_ctxsize	= sizeof(struct gcm_key),
+	.base.cra_module	= THIS_MODULE,
+}, {
+	.ivsize			= GCM_RFC4106_IV_SIZE,
+	.chunksize		= AES_BLOCK_SIZE,
+	.maxauthsize		= AES_BLOCK_SIZE,
+	.setkey			= rfc4106_setkey,
+	.setauthsize		= rfc4106_setauthsize,
+	.encrypt		= rfc4106_encrypt,
+	.decrypt		= rfc4106_decrypt,
+
+	.base.cra_name		= "rfc4106(gcm(aes))",
+	.base.cra_driver_name	= "rfc4106-gcm-aes-ce",
+	.base.cra_priority	= 400,
+	.base.cra_blocksize	= 1,
+	.base.cra_ctxsize	= sizeof(struct gcm_key) + RFC4106_NONCE_SIZE,
+	.base.cra_module	= THIS_MODULE,
+}};
+
 static int __init ghash_ce_mod_init(void)
 {
 	int err;
@@ -352,13 +756,17 @@ static int __init ghash_ce_mod_init(void)
 		return -ENODEV;
 
 	if (elf_hwcap2 & HWCAP2_PMULL) {
+		err = crypto_register_aeads(gcm_aes_algs,
+					    ARRAY_SIZE(gcm_aes_algs));
+		if (err)
+			return err;
 		ghash_alg.base.cra_ctxsize += 3 * sizeof(u64[2]);
 		static_branch_enable(&use_p64);
 	}
 
 	err = crypto_register_shash(&ghash_alg);
 	if (err)
-		return err;
+		goto err_aead;
 	err = crypto_register_ahash(&ghash_async_alg);
 	if (err)
 		goto err_shash;
@@ -367,6 +775,10 @@ static int __init ghash_ce_mod_init(void)
 
 err_shash:
 	crypto_unregister_shash(&ghash_alg);
+err_aead:
+	if (elf_hwcap2 & HWCAP2_PMULL)
+		crypto_unregister_aeads(gcm_aes_algs,
+					ARRAY_SIZE(gcm_aes_algs));
 	return err;
 }
 
@@ -374,6 +786,9 @@ static void __exit ghash_ce_mod_exit(void)
 {
 	crypto_unregister_ahash(&ghash_async_alg);
 	crypto_unregister_shash(&ghash_alg);
+	if (elf_hwcap2 & HWCAP2_PMULL)
+		crypto_unregister_aeads(gcm_aes_algs,
+					ARRAY_SIZE(gcm_aes_algs));
 }
 
 module_init(ghash_ce_mod_init);
diff --git a/arch/arm/crypto/nh-neon-core.S b/arch/arm/crypto/nh-neon-core.S
index 434d80ab531c..01620a0782ca 100644
--- a/arch/arm/crypto/nh-neon-core.S
+++ b/arch/arm/crypto/nh-neon-core.S
@@ -69,7 +69,7 @@
 
 /*
  * void nh_neon(const u32 *key, const u8 *message, size_t message_len,
- *		u8 hash[NH_HASH_BYTES])
+ *		__le64 hash[NH_NUM_PASSES])
  *
  * It's guaranteed that message_len % 16 == 0.
  */
diff --git a/arch/arm/crypto/nhpoly1305-neon-glue.c b/arch/arm/crypto/nhpoly1305-neon-glue.c
index ffa8d73fe722..e93e41ff2656 100644
--- a/arch/arm/crypto/nhpoly1305-neon-glue.c
+++ b/arch/arm/crypto/nhpoly1305-neon-glue.c
@@ -14,14 +14,7 @@
 #include <linux/module.h>
 
 asmlinkage void nh_neon(const u32 *key, const u8 *message, size_t message_len,
-			u8 hash[NH_HASH_BYTES]);
-
-/* wrapper to avoid indirect call to assembly, which doesn't work with CFI */
-static void _nh_neon(const u32 *key, const u8 *message, size_t message_len,
-		     __le64 hash[NH_NUM_PASSES])
-{
-	nh_neon(key, message, message_len, (u8 *)hash);
-}
+			__le64 hash[NH_NUM_PASSES]);
 
 static int nhpoly1305_neon_update(struct shash_desc *desc,
 				  const u8 *src, unsigned int srclen)
@@ -33,7 +26,7 @@ static int nhpoly1305_neon_update(struct shash_desc *desc,
 		unsigned int n = min_t(unsigned int, srclen, SZ_4K);
 
 		kernel_neon_begin();
-		crypto_nhpoly1305_update_helper(desc, src, n, _nh_neon);
+		crypto_nhpoly1305_update_helper(desc, src, n, nh_neon);
 		kernel_neon_end();
 		src += n;
 		srclen -= n;
diff --git a/arch/arm/crypto/poly1305-core.S_shipped b/arch/arm/crypto/poly1305-core.S_shipped
deleted file mode 100644
index 37b71d990293..000000000000
--- a/arch/arm/crypto/poly1305-core.S_shipped
+++ /dev/null
@@ -1,1158 +0,0 @@
-#ifndef	__KERNEL__
-# include "arm_arch.h"
-#else
-# define __ARM_ARCH__ __LINUX_ARM_ARCH__
-# define __ARM_MAX_ARCH__ __LINUX_ARM_ARCH__
-# define poly1305_init   poly1305_init_arm
-# define poly1305_blocks poly1305_blocks_arm
-# define poly1305_emit   poly1305_emit_arm
-.globl	poly1305_blocks_neon
-#endif
-
-#if defined(__thumb2__)
-.syntax	unified
-.thumb
-#else
-.code	32
-#endif
-
-.text
-
-.globl	poly1305_emit
-.globl	poly1305_blocks
-.globl	poly1305_init
-.type	poly1305_init,%function
-.align	5
-poly1305_init:
-.Lpoly1305_init:
-	stmdb	sp!,{r4-r11}
-
-	eor	r3,r3,r3
-	cmp	r1,#0
-	str	r3,[r0,#0]		@ zero hash value
-	str	r3,[r0,#4]
-	str	r3,[r0,#8]
-	str	r3,[r0,#12]
-	str	r3,[r0,#16]
-	str	r3,[r0,#36]		@ clear is_base2_26
-	add	r0,r0,#20
-
-#ifdef	__thumb2__
-	it	eq
-#endif
-	moveq	r0,#0
-	beq	.Lno_key
-
-#if	__ARM_MAX_ARCH__>=7
-	mov	r3,#-1
-	str	r3,[r0,#28]		@ impossible key power value
-# ifndef __KERNEL__
-	adr	r11,.Lpoly1305_init
-	ldr	r12,.LOPENSSL_armcap
-# endif
-#endif
-	ldrb	r4,[r1,#0]
-	mov	r10,#0x0fffffff
-	ldrb	r5,[r1,#1]
-	and	r3,r10,#-4		@ 0x0ffffffc
-	ldrb	r6,[r1,#2]
-	ldrb	r7,[r1,#3]
-	orr	r4,r4,r5,lsl#8
-	ldrb	r5,[r1,#4]
-	orr	r4,r4,r6,lsl#16
-	ldrb	r6,[r1,#5]
-	orr	r4,r4,r7,lsl#24
-	ldrb	r7,[r1,#6]
-	and	r4,r4,r10
-
-#if	__ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-# if !defined(_WIN32)
-	ldr	r12,[r11,r12]		@ OPENSSL_armcap_P
-# endif
-# if defined(__APPLE__) || defined(_WIN32)
-	ldr	r12,[r12]
-# endif
-#endif
-	ldrb	r8,[r1,#7]
-	orr	r5,r5,r6,lsl#8
-	ldrb	r6,[r1,#8]
-	orr	r5,r5,r7,lsl#16
-	ldrb	r7,[r1,#9]
-	orr	r5,r5,r8,lsl#24
-	ldrb	r8,[r1,#10]
-	and	r5,r5,r3
-
-#if	__ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-	tst	r12,#ARMV7_NEON		@ check for NEON
-# ifdef	__thumb2__
-	adr	r9,.Lpoly1305_blocks_neon
-	adr	r11,.Lpoly1305_blocks
-	it	ne
-	movne	r11,r9
-	adr	r12,.Lpoly1305_emit
-	orr	r11,r11,#1		@ thumb-ify addresses
-	orr	r12,r12,#1
-# else
-	add	r12,r11,#(.Lpoly1305_emit-.Lpoly1305_init)
-	ite	eq
-	addeq	r11,r11,#(.Lpoly1305_blocks-.Lpoly1305_init)
-	addne	r11,r11,#(.Lpoly1305_blocks_neon-.Lpoly1305_init)
-# endif
-#endif
-	ldrb	r9,[r1,#11]
-	orr	r6,r6,r7,lsl#8
-	ldrb	r7,[r1,#12]
-	orr	r6,r6,r8,lsl#16
-	ldrb	r8,[r1,#13]
-	orr	r6,r6,r9,lsl#24
-	ldrb	r9,[r1,#14]
-	and	r6,r6,r3
-
-	ldrb	r10,[r1,#15]
-	orr	r7,r7,r8,lsl#8
-	str	r4,[r0,#0]
-	orr	r7,r7,r9,lsl#16
-	str	r5,[r0,#4]
-	orr	r7,r7,r10,lsl#24
-	str	r6,[r0,#8]
-	and	r7,r7,r3
-	str	r7,[r0,#12]
-#if	__ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-	stmia	r2,{r11,r12}		@ fill functions table
-	mov	r0,#1
-#else
-	mov	r0,#0
-#endif
-.Lno_key:
-	ldmia	sp!,{r4-r11}
-#if	__ARM_ARCH__>=5
-	bx	lr				@ bx	lr
-#else
-	tst	lr,#1
-	moveq	pc,lr			@ be binary compatible with V4, yet
-	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
-#endif
-.size	poly1305_init,.-poly1305_init
-.type	poly1305_blocks,%function
-.align	5
-poly1305_blocks:
-.Lpoly1305_blocks:
-	stmdb	sp!,{r3-r11,lr}
-
-	ands	r2,r2,#-16
-	beq	.Lno_data
-
-	add	r2,r2,r1		@ end pointer
-	sub	sp,sp,#32
-
-#if __ARM_ARCH__<7
-	ldmia	r0,{r4-r12}		@ load context
-	add	r0,r0,#20
-	str	r2,[sp,#16]		@ offload stuff
-	str	r0,[sp,#12]
-#else
-	ldr	lr,[r0,#36]		@ is_base2_26
-	ldmia	r0!,{r4-r8}		@ load hash value
-	str	r2,[sp,#16]		@ offload stuff
-	str	r0,[sp,#12]
-
-	adds	r9,r4,r5,lsl#26	@ base 2^26 -> base 2^32
-	mov	r10,r5,lsr#6
-	adcs	r10,r10,r6,lsl#20
-	mov	r11,r6,lsr#12
-	adcs	r11,r11,r7,lsl#14
-	mov	r12,r7,lsr#18
-	adcs	r12,r12,r8,lsl#8
-	mov	r2,#0
-	teq	lr,#0
-	str	r2,[r0,#16]		@ clear is_base2_26
-	adc	r2,r2,r8,lsr#24
-
-	itttt	ne
-	movne	r4,r9			@ choose between radixes
-	movne	r5,r10
-	movne	r6,r11
-	movne	r7,r12
-	ldmia	r0,{r9-r12}		@ load key
-	it	ne
-	movne	r8,r2
-#endif
-
-	mov	lr,r1
-	cmp	r3,#0
-	str	r10,[sp,#20]
-	str	r11,[sp,#24]
-	str	r12,[sp,#28]
-	b	.Loop
-
-.align	4
-.Loop:
-#if __ARM_ARCH__<7
-	ldrb	r0,[lr],#16		@ load input
-# ifdef	__thumb2__
-	it	hi
-# endif
-	addhi	r8,r8,#1		@ 1<<128
-	ldrb	r1,[lr,#-15]
-	ldrb	r2,[lr,#-14]
-	ldrb	r3,[lr,#-13]
-	orr	r1,r0,r1,lsl#8
-	ldrb	r0,[lr,#-12]
-	orr	r2,r1,r2,lsl#16
-	ldrb	r1,[lr,#-11]
-	orr	r3,r2,r3,lsl#24
-	ldrb	r2,[lr,#-10]
-	adds	r4,r4,r3		@ accumulate input
-
-	ldrb	r3,[lr,#-9]
-	orr	r1,r0,r1,lsl#8
-	ldrb	r0,[lr,#-8]
-	orr	r2,r1,r2,lsl#16
-	ldrb	r1,[lr,#-7]
-	orr	r3,r2,r3,lsl#24
-	ldrb	r2,[lr,#-6]
-	adcs	r5,r5,r3
-
-	ldrb	r3,[lr,#-5]
-	orr	r1,r0,r1,lsl#8
-	ldrb	r0,[lr,#-4]
-	orr	r2,r1,r2,lsl#16
-	ldrb	r1,[lr,#-3]
-	orr	r3,r2,r3,lsl#24
-	ldrb	r2,[lr,#-2]
-	adcs	r6,r6,r3
-
-	ldrb	r3,[lr,#-1]
-	orr	r1,r0,r1,lsl#8
-	str	lr,[sp,#8]		@ offload input pointer
-	orr	r2,r1,r2,lsl#16
-	add	r10,r10,r10,lsr#2
-	orr	r3,r2,r3,lsl#24
-#else
-	ldr	r0,[lr],#16		@ load input
-	it	hi
-	addhi	r8,r8,#1		@ padbit
-	ldr	r1,[lr,#-12]
-	ldr	r2,[lr,#-8]
-	ldr	r3,[lr,#-4]
-# ifdef	__ARMEB__
-	rev	r0,r0
-	rev	r1,r1
-	rev	r2,r2
-	rev	r3,r3
-# endif
-	adds	r4,r4,r0		@ accumulate input
-	str	lr,[sp,#8]		@ offload input pointer
-	adcs	r5,r5,r1
-	add	r10,r10,r10,lsr#2
-	adcs	r6,r6,r2
-#endif
-	add	r11,r11,r11,lsr#2
-	adcs	r7,r7,r3
-	add	r12,r12,r12,lsr#2
-
-	umull	r2,r3,r5,r9
-	 adc	r8,r8,#0
-	umull	r0,r1,r4,r9
-	umlal	r2,r3,r8,r10
-	umlal	r0,r1,r7,r10
-	ldr	r10,[sp,#20]		@ reload r10
-	umlal	r2,r3,r6,r12
-	umlal	r0,r1,r5,r12
-	umlal	r2,r3,r7,r11
-	umlal	r0,r1,r6,r11
-	umlal	r2,r3,r4,r10
-	str	r0,[sp,#0]		@ future r4
-	 mul	r0,r11,r8
-	ldr	r11,[sp,#24]		@ reload r11
-	adds	r2,r2,r1		@ d1+=d0>>32
-	 eor	r1,r1,r1
-	adc	lr,r3,#0		@ future r6
-	str	r2,[sp,#4]		@ future r5
-
-	mul	r2,r12,r8
-	eor	r3,r3,r3
-	umlal	r0,r1,r7,r12
-	ldr	r12,[sp,#28]		@ reload r12
-	umlal	r2,r3,r7,r9
-	umlal	r0,r1,r6,r9
-	umlal	r2,r3,r6,r10
-	umlal	r0,r1,r5,r10
-	umlal	r2,r3,r5,r11
-	umlal	r0,r1,r4,r11
-	umlal	r2,r3,r4,r12
-	ldr	r4,[sp,#0]
-	mul	r8,r9,r8
-	ldr	r5,[sp,#4]
-
-	adds	r6,lr,r0		@ d2+=d1>>32
-	ldr	lr,[sp,#8]		@ reload input pointer
-	adc	r1,r1,#0
-	adds	r7,r2,r1		@ d3+=d2>>32
-	ldr	r0,[sp,#16]		@ reload end pointer
-	adc	r3,r3,#0
-	add	r8,r8,r3		@ h4+=d3>>32
-
-	and	r1,r8,#-4
-	and	r8,r8,#3
-	add	r1,r1,r1,lsr#2		@ *=5
-	adds	r4,r4,r1
-	adcs	r5,r5,#0
-	adcs	r6,r6,#0
-	adcs	r7,r7,#0
-	adc	r8,r8,#0
-
-	cmp	r0,lr			@ done yet?
-	bhi	.Loop
-
-	ldr	r0,[sp,#12]
-	add	sp,sp,#32
-	stmdb	r0,{r4-r8}		@ store the result
-
-.Lno_data:
-#if	__ARM_ARCH__>=5
-	ldmia	sp!,{r3-r11,pc}
-#else
-	ldmia	sp!,{r3-r11,lr}
-	tst	lr,#1
-	moveq	pc,lr			@ be binary compatible with V4, yet
-	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
-#endif
-.size	poly1305_blocks,.-poly1305_blocks
-.type	poly1305_emit,%function
-.align	5
-poly1305_emit:
-.Lpoly1305_emit:
-	stmdb	sp!,{r4-r11}
-
-	ldmia	r0,{r3-r7}
-
-#if __ARM_ARCH__>=7
-	ldr	ip,[r0,#36]		@ is_base2_26
-
-	adds	r8,r3,r4,lsl#26	@ base 2^26 -> base 2^32
-	mov	r9,r4,lsr#6
-	adcs	r9,r9,r5,lsl#20
-	mov	r10,r5,lsr#12
-	adcs	r10,r10,r6,lsl#14
-	mov	r11,r6,lsr#18
-	adcs	r11,r11,r7,lsl#8
-	mov	r0,#0
-	adc	r0,r0,r7,lsr#24
-
-	tst	ip,ip
-	itttt	ne
-	movne	r3,r8
-	movne	r4,r9
-	movne	r5,r10
-	movne	r6,r11
-	it	ne
-	movne	r7,r0
-#endif
-
-	adds	r8,r3,#5		@ compare to modulus
-	adcs	r9,r4,#0
-	adcs	r10,r5,#0
-	adcs	r11,r6,#0
-	adc	r0,r7,#0
-	tst	r0,#4			@ did it carry/borrow?
-
-#ifdef	__thumb2__
-	it	ne
-#endif
-	movne	r3,r8
-	ldr	r8,[r2,#0]
-#ifdef	__thumb2__
-	it	ne
-#endif
-	movne	r4,r9
-	ldr	r9,[r2,#4]
-#ifdef	__thumb2__
-	it	ne
-#endif
-	movne	r5,r10
-	ldr	r10,[r2,#8]
-#ifdef	__thumb2__
-	it	ne
-#endif
-	movne	r6,r11
-	ldr	r11,[r2,#12]
-
-	adds	r3,r3,r8
-	adcs	r4,r4,r9
-	adcs	r5,r5,r10
-	adc	r6,r6,r11
-
-#if __ARM_ARCH__>=7
-# ifdef __ARMEB__
-	rev	r3,r3
-	rev	r4,r4
-	rev	r5,r5
-	rev	r6,r6
-# endif
-	str	r3,[r1,#0]
-	str	r4,[r1,#4]
-	str	r5,[r1,#8]
-	str	r6,[r1,#12]
-#else
-	strb	r3,[r1,#0]
-	mov	r3,r3,lsr#8
-	strb	r4,[r1,#4]
-	mov	r4,r4,lsr#8
-	strb	r5,[r1,#8]
-	mov	r5,r5,lsr#8
-	strb	r6,[r1,#12]
-	mov	r6,r6,lsr#8
-
-	strb	r3,[r1,#1]
-	mov	r3,r3,lsr#8
-	strb	r4,[r1,#5]
-	mov	r4,r4,lsr#8
-	strb	r5,[r1,#9]
-	mov	r5,r5,lsr#8
-	strb	r6,[r1,#13]
-	mov	r6,r6,lsr#8
-
-	strb	r3,[r1,#2]
-	mov	r3,r3,lsr#8
-	strb	r4,[r1,#6]
-	mov	r4,r4,lsr#8
-	strb	r5,[r1,#10]
-	mov	r5,r5,lsr#8
-	strb	r6,[r1,#14]
-	mov	r6,r6,lsr#8
-
-	strb	r3,[r1,#3]
-	strb	r4,[r1,#7]
-	strb	r5,[r1,#11]
-	strb	r6,[r1,#15]
-#endif
-	ldmia	sp!,{r4-r11}
-#if	__ARM_ARCH__>=5
-	bx	lr				@ bx	lr
-#else
-	tst	lr,#1
-	moveq	pc,lr			@ be binary compatible with V4, yet
-	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
-#endif
-.size	poly1305_emit,.-poly1305_emit
-#if	__ARM_MAX_ARCH__>=7
-.fpu	neon
-
-.type	poly1305_init_neon,%function
-.align	5
-poly1305_init_neon:
-.Lpoly1305_init_neon:
-	ldr	r3,[r0,#48]		@ first table element
-	cmp	r3,#-1			@ is value impossible?
-	bne	.Lno_init_neon
-
-	ldr	r4,[r0,#20]		@ load key base 2^32
-	ldr	r5,[r0,#24]
-	ldr	r6,[r0,#28]
-	ldr	r7,[r0,#32]
-
-	and	r2,r4,#0x03ffffff	@ base 2^32 -> base 2^26
-	mov	r3,r4,lsr#26
-	mov	r4,r5,lsr#20
-	orr	r3,r3,r5,lsl#6
-	mov	r5,r6,lsr#14
-	orr	r4,r4,r6,lsl#12
-	mov	r6,r7,lsr#8
-	orr	r5,r5,r7,lsl#18
-	and	r3,r3,#0x03ffffff
-	and	r4,r4,#0x03ffffff
-	and	r5,r5,#0x03ffffff
-
-	vdup.32	d0,r2			@ r^1 in both lanes
-	add	r2,r3,r3,lsl#2		@ *5
-	vdup.32	d1,r3
-	add	r3,r4,r4,lsl#2
-	vdup.32	d2,r2
-	vdup.32	d3,r4
-	add	r4,r5,r5,lsl#2
-	vdup.32	d4,r3
-	vdup.32	d5,r5
-	add	r5,r6,r6,lsl#2
-	vdup.32	d6,r4
-	vdup.32	d7,r6
-	vdup.32	d8,r5
-
-	mov	r5,#2		@ counter
-
-.Lsquare_neon:
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
-	@ d1 = h1*r0 + h0*r1   + h4*5*r2 + h3*5*r3 + h2*5*r4
-	@ d2 = h2*r0 + h1*r1   + h0*r2   + h4*5*r3 + h3*5*r4
-	@ d3 = h3*r0 + h2*r1   + h1*r2   + h0*r3   + h4*5*r4
-	@ d4 = h4*r0 + h3*r1   + h2*r2   + h1*r3   + h0*r4
-
-	vmull.u32	q5,d0,d0[1]
-	vmull.u32	q6,d1,d0[1]
-	vmull.u32	q7,d3,d0[1]
-	vmull.u32	q8,d5,d0[1]
-	vmull.u32	q9,d7,d0[1]
-
-	vmlal.u32	q5,d7,d2[1]
-	vmlal.u32	q6,d0,d1[1]
-	vmlal.u32	q7,d1,d1[1]
-	vmlal.u32	q8,d3,d1[1]
-	vmlal.u32	q9,d5,d1[1]
-
-	vmlal.u32	q5,d5,d4[1]
-	vmlal.u32	q6,d7,d4[1]
-	vmlal.u32	q8,d1,d3[1]
-	vmlal.u32	q7,d0,d3[1]
-	vmlal.u32	q9,d3,d3[1]
-
-	vmlal.u32	q5,d3,d6[1]
-	vmlal.u32	q8,d0,d5[1]
-	vmlal.u32	q6,d5,d6[1]
-	vmlal.u32	q7,d7,d6[1]
-	vmlal.u32	q9,d1,d5[1]
-
-	vmlal.u32	q8,d7,d8[1]
-	vmlal.u32	q5,d1,d8[1]
-	vmlal.u32	q6,d3,d8[1]
-	vmlal.u32	q7,d5,d8[1]
-	vmlal.u32	q9,d0,d7[1]
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ lazy reduction as discussed in "NEON crypto" by D.J. Bernstein
-	@ and P. Schwabe
-	@
-	@ H0>>+H1>>+H2>>+H3>>+H4
-	@ H3>>+H4>>*5+H0>>+H1
-	@
-	@ Trivia.
-	@
-	@ Result of multiplication of n-bit number by m-bit number is
-	@ n+m bits wide. However! Even though 2^n is a n+1-bit number,
-	@ m-bit number multiplied by 2^n is still n+m bits wide.
-	@
-	@ Sum of two n-bit numbers is n+1 bits wide, sum of three - n+2,
-	@ and so is sum of four. Sum of 2^m n-m-bit numbers and n-bit
-	@ one is n+1 bits wide.
-	@
-	@ >>+ denotes Hnext += Hn>>26, Hn &= 0x3ffffff. This means that
-	@ H0, H2, H3 are guaranteed to be 26 bits wide, while H1 and H4
-	@ can be 27. However! In cases when their width exceeds 26 bits
-	@ they are limited by 2^26+2^6. This in turn means that *sum*
-	@ of the products with these values can still be viewed as sum
-	@ of 52-bit numbers as long as the amount of addends is not a
-	@ power of 2. For example,
-	@
-	@ H4 = H4*R0 + H3*R1 + H2*R2 + H1*R3 + H0 * R4,
-	@
-	@ which can't be larger than 5 * (2^26 + 2^6) * (2^26 + 2^6), or
-	@ 5 * (2^52 + 2*2^32 + 2^12), which in turn is smaller than
-	@ 8 * (2^52) or 2^55. However, the value is then multiplied by
-	@ by 5, so we should be looking at 5 * 5 * (2^52 + 2^33 + 2^12),
-	@ which is less than 32 * (2^52) or 2^57. And when processing
-	@ data we are looking at triple as many addends...
-	@
-	@ In key setup procedure pre-reduced H0 is limited by 5*4+1 and
-	@ 5*H4 - by 5*5 52-bit addends, or 57 bits. But when hashing the
-	@ input H0 is limited by (5*4+1)*3 addends, or 58 bits, while
-	@ 5*H4 by 5*5*3, or 59[!] bits. How is this relevant? vmlal.u32
-	@ instruction accepts 2x32-bit input and writes 2x64-bit result.
-	@ This means that result of reduction have to be compressed upon
-	@ loop wrap-around. This can be done in the process of reduction
-	@ to minimize amount of instructions [as well as amount of
-	@ 128-bit instructions, which benefits low-end processors], but
-	@ one has to watch for H2 (which is narrower than H0) and 5*H4
-	@ not being wider than 58 bits, so that result of right shift
-	@ by 26 bits fits in 32 bits. This is also useful on x86,
-	@ because it allows to use paddd in place for paddq, which
-	@ benefits Atom, where paddq is ridiculously slow.
-
-	vshr.u64	q15,q8,#26
-	vmovn.i64	d16,q8
-	 vshr.u64	q4,q5,#26
-	 vmovn.i64	d10,q5
-	vadd.i64	q9,q9,q15		@ h3 -> h4
-	vbic.i32	d16,#0xfc000000	@ &=0x03ffffff
-	 vadd.i64	q6,q6,q4		@ h0 -> h1
-	 vbic.i32	d10,#0xfc000000
-
-	vshrn.u64	d30,q9,#26
-	vmovn.i64	d18,q9
-	 vshr.u64	q4,q6,#26
-	 vmovn.i64	d12,q6
-	 vadd.i64	q7,q7,q4		@ h1 -> h2
-	vbic.i32	d18,#0xfc000000
-	 vbic.i32	d12,#0xfc000000
-
-	vadd.i32	d10,d10,d30
-	vshl.u32	d30,d30,#2
-	 vshrn.u64	d8,q7,#26
-	 vmovn.i64	d14,q7
-	vadd.i32	d10,d10,d30	@ h4 -> h0
-	 vadd.i32	d16,d16,d8	@ h2 -> h3
-	 vbic.i32	d14,#0xfc000000
-
-	vshr.u32	d30,d10,#26
-	vbic.i32	d10,#0xfc000000
-	 vshr.u32	d8,d16,#26
-	 vbic.i32	d16,#0xfc000000
-	vadd.i32	d12,d12,d30	@ h0 -> h1
-	 vadd.i32	d18,d18,d8	@ h3 -> h4
-
-	subs		r5,r5,#1
-	beq		.Lsquare_break_neon
-
-	add		r6,r0,#(48+0*9*4)
-	add		r7,r0,#(48+1*9*4)
-
-	vtrn.32		d0,d10		@ r^2:r^1
-	vtrn.32		d3,d14
-	vtrn.32		d5,d16
-	vtrn.32		d1,d12
-	vtrn.32		d7,d18
-
-	vshl.u32	d4,d3,#2		@ *5
-	vshl.u32	d6,d5,#2
-	vshl.u32	d2,d1,#2
-	vshl.u32	d8,d7,#2
-	vadd.i32	d4,d4,d3
-	vadd.i32	d2,d2,d1
-	vadd.i32	d6,d6,d5
-	vadd.i32	d8,d8,d7
-
-	vst4.32		{d0[0],d1[0],d2[0],d3[0]},[r6]!
-	vst4.32		{d0[1],d1[1],d2[1],d3[1]},[r7]!
-	vst4.32		{d4[0],d5[0],d6[0],d7[0]},[r6]!
-	vst4.32		{d4[1],d5[1],d6[1],d7[1]},[r7]!
-	vst1.32		{d8[0]},[r6,:32]
-	vst1.32		{d8[1]},[r7,:32]
-
-	b		.Lsquare_neon
-
-.align	4
-.Lsquare_break_neon:
-	add		r6,r0,#(48+2*4*9)
-	add		r7,r0,#(48+3*4*9)
-
-	vmov		d0,d10		@ r^4:r^3
-	vshl.u32	d2,d12,#2		@ *5
-	vmov		d1,d12
-	vshl.u32	d4,d14,#2
-	vmov		d3,d14
-	vshl.u32	d6,d16,#2
-	vmov		d5,d16
-	vshl.u32	d8,d18,#2
-	vmov		d7,d18
-	vadd.i32	d2,d2,d12
-	vadd.i32	d4,d4,d14
-	vadd.i32	d6,d6,d16
-	vadd.i32	d8,d8,d18
-
-	vst4.32		{d0[0],d1[0],d2[0],d3[0]},[r6]!
-	vst4.32		{d0[1],d1[1],d2[1],d3[1]},[r7]!
-	vst4.32		{d4[0],d5[0],d6[0],d7[0]},[r6]!
-	vst4.32		{d4[1],d5[1],d6[1],d7[1]},[r7]!
-	vst1.32		{d8[0]},[r6]
-	vst1.32		{d8[1]},[r7]
-
-.Lno_init_neon:
-	bx	lr				@ bx	lr
-.size	poly1305_init_neon,.-poly1305_init_neon
-
-.type	poly1305_blocks_neon,%function
-.align	5
-poly1305_blocks_neon:
-.Lpoly1305_blocks_neon:
-	ldr	ip,[r0,#36]		@ is_base2_26
-
-	cmp	r2,#64
-	blo	.Lpoly1305_blocks
-
-	stmdb	sp!,{r4-r7}
-	vstmdb	sp!,{d8-d15}		@ ABI specification says so
-
-	tst	ip,ip			@ is_base2_26?
-	bne	.Lbase2_26_neon
-
-	stmdb	sp!,{r1-r3,lr}
-	bl	.Lpoly1305_init_neon
-
-	ldr	r4,[r0,#0]		@ load hash value base 2^32
-	ldr	r5,[r0,#4]
-	ldr	r6,[r0,#8]
-	ldr	r7,[r0,#12]
-	ldr	ip,[r0,#16]
-
-	and	r2,r4,#0x03ffffff	@ base 2^32 -> base 2^26
-	mov	r3,r4,lsr#26
-	 veor	d10,d10,d10
-	mov	r4,r5,lsr#20
-	orr	r3,r3,r5,lsl#6
-	 veor	d12,d12,d12
-	mov	r5,r6,lsr#14
-	orr	r4,r4,r6,lsl#12
-	 veor	d14,d14,d14
-	mov	r6,r7,lsr#8
-	orr	r5,r5,r7,lsl#18
-	 veor	d16,d16,d16
-	and	r3,r3,#0x03ffffff
-	orr	r6,r6,ip,lsl#24
-	 veor	d18,d18,d18
-	and	r4,r4,#0x03ffffff
-	mov	r1,#1
-	and	r5,r5,#0x03ffffff
-	str	r1,[r0,#36]		@ set is_base2_26
-
-	vmov.32	d10[0],r2
-	vmov.32	d12[0],r3
-	vmov.32	d14[0],r4
-	vmov.32	d16[0],r5
-	vmov.32	d18[0],r6
-	adr	r5,.Lzeros
-
-	ldmia	sp!,{r1-r3,lr}
-	b	.Lhash_loaded
-
-.align	4
-.Lbase2_26_neon:
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ load hash value
-
-	veor		d10,d10,d10
-	veor		d12,d12,d12
-	veor		d14,d14,d14
-	veor		d16,d16,d16
-	veor		d18,d18,d18
-	vld4.32		{d10[0],d12[0],d14[0],d16[0]},[r0]!
-	adr		r5,.Lzeros
-	vld1.32		{d18[0]},[r0]
-	sub		r0,r0,#16		@ rewind
-
-.Lhash_loaded:
-	add		r4,r1,#32
-	mov		r3,r3,lsl#24
-	tst		r2,#31
-	beq		.Leven
-
-	vld4.32		{d20[0],d22[0],d24[0],d26[0]},[r1]!
-	vmov.32		d28[0],r3
-	sub		r2,r2,#16
-	add		r4,r1,#32
-
-# ifdef	__ARMEB__
-	vrev32.8	q10,q10
-	vrev32.8	q13,q13
-	vrev32.8	q11,q11
-	vrev32.8	q12,q12
-# endif
-	vsri.u32	d28,d26,#8	@ base 2^32 -> base 2^26
-	vshl.u32	d26,d26,#18
-
-	vsri.u32	d26,d24,#14
-	vshl.u32	d24,d24,#12
-	vadd.i32	d29,d28,d18	@ add hash value and move to #hi
-
-	vbic.i32	d26,#0xfc000000
-	vsri.u32	d24,d22,#20
-	vshl.u32	d22,d22,#6
-
-	vbic.i32	d24,#0xfc000000
-	vsri.u32	d22,d20,#26
-	vadd.i32	d27,d26,d16
-
-	vbic.i32	d20,#0xfc000000
-	vbic.i32	d22,#0xfc000000
-	vadd.i32	d25,d24,d14
-
-	vadd.i32	d21,d20,d10
-	vadd.i32	d23,d22,d12
-
-	mov		r7,r5
-	add		r6,r0,#48
-
-	cmp		r2,r2
-	b		.Long_tail
-
-.align	4
-.Leven:
-	subs		r2,r2,#64
-	it		lo
-	movlo		r4,r5
-
-	vmov.i32	q14,#1<<24		@ padbit, yes, always
-	vld4.32		{d20,d22,d24,d26},[r1]	@ inp[0:1]
-	add		r1,r1,#64
-	vld4.32		{d21,d23,d25,d27},[r4]	@ inp[2:3] (or 0)
-	add		r4,r4,#64
-	itt		hi
-	addhi		r7,r0,#(48+1*9*4)
-	addhi		r6,r0,#(48+3*9*4)
-
-# ifdef	__ARMEB__
-	vrev32.8	q10,q10
-	vrev32.8	q13,q13
-	vrev32.8	q11,q11
-	vrev32.8	q12,q12
-# endif
-	vsri.u32	q14,q13,#8		@ base 2^32 -> base 2^26
-	vshl.u32	q13,q13,#18
-
-	vsri.u32	q13,q12,#14
-	vshl.u32	q12,q12,#12
-
-	vbic.i32	q13,#0xfc000000
-	vsri.u32	q12,q11,#20
-	vshl.u32	q11,q11,#6
-
-	vbic.i32	q12,#0xfc000000
-	vsri.u32	q11,q10,#26
-
-	vbic.i32	q10,#0xfc000000
-	vbic.i32	q11,#0xfc000000
-
-	bls		.Lskip_loop
-
-	vld4.32		{d0[1],d1[1],d2[1],d3[1]},[r7]!	@ load r^2
-	vld4.32		{d0[0],d1[0],d2[0],d3[0]},[r6]!	@ load r^4
-	vld4.32		{d4[1],d5[1],d6[1],d7[1]},[r7]!
-	vld4.32		{d4[0],d5[0],d6[0],d7[0]},[r6]!
-	b		.Loop_neon
-
-.align	5
-.Loop_neon:
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2
-	@ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r
-	@   ___________________/
-	@ ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2
-	@ ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r
-	@   ___________________/ ____________________/
-	@
-	@ Note that we start with inp[2:3]*r^2. This is because it
-	@ doesn't depend on reduction in previous iteration.
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ d4 = h4*r0 + h3*r1   + h2*r2   + h1*r3   + h0*r4
-	@ d3 = h3*r0 + h2*r1   + h1*r2   + h0*r3   + h4*5*r4
-	@ d2 = h2*r0 + h1*r1   + h0*r2   + h4*5*r3 + h3*5*r4
-	@ d1 = h1*r0 + h0*r1   + h4*5*r2 + h3*5*r3 + h2*5*r4
-	@ d0 = h0*r0 + h4*5*r1 + h3*5*r2 + h2*5*r3 + h1*5*r4
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ inp[2:3]*r^2
-
-	vadd.i32	d24,d24,d14	@ accumulate inp[0:1]
-	vmull.u32	q7,d25,d0[1]
-	vadd.i32	d20,d20,d10
-	vmull.u32	q5,d21,d0[1]
-	vadd.i32	d26,d26,d16
-	vmull.u32	q8,d27,d0[1]
-	vmlal.u32	q7,d23,d1[1]
-	vadd.i32	d22,d22,d12
-	vmull.u32	q6,d23,d0[1]
-
-	vadd.i32	d28,d28,d18
-	vmull.u32	q9,d29,d0[1]
-	subs		r2,r2,#64
-	vmlal.u32	q5,d29,d2[1]
-	it		lo
-	movlo		r4,r5
-	vmlal.u32	q8,d25,d1[1]
-	vld1.32		d8[1],[r7,:32]
-	vmlal.u32	q6,d21,d1[1]
-	vmlal.u32	q9,d27,d1[1]
-
-	vmlal.u32	q5,d27,d4[1]
-	vmlal.u32	q8,d23,d3[1]
-	vmlal.u32	q9,d25,d3[1]
-	vmlal.u32	q6,d29,d4[1]
-	vmlal.u32	q7,d21,d3[1]
-
-	vmlal.u32	q8,d21,d5[1]
-	vmlal.u32	q5,d25,d6[1]
-	vmlal.u32	q9,d23,d5[1]
-	vmlal.u32	q6,d27,d6[1]
-	vmlal.u32	q7,d29,d6[1]
-
-	vmlal.u32	q8,d29,d8[1]
-	vmlal.u32	q5,d23,d8[1]
-	vmlal.u32	q9,d21,d7[1]
-	vmlal.u32	q6,d25,d8[1]
-	vmlal.u32	q7,d27,d8[1]
-
-	vld4.32		{d21,d23,d25,d27},[r4]	@ inp[2:3] (or 0)
-	add		r4,r4,#64
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ (hash+inp[0:1])*r^4 and accumulate
-
-	vmlal.u32	q8,d26,d0[0]
-	vmlal.u32	q5,d20,d0[0]
-	vmlal.u32	q9,d28,d0[0]
-	vmlal.u32	q6,d22,d0[0]
-	vmlal.u32	q7,d24,d0[0]
-	vld1.32		d8[0],[r6,:32]
-
-	vmlal.u32	q8,d24,d1[0]
-	vmlal.u32	q5,d28,d2[0]
-	vmlal.u32	q9,d26,d1[0]
-	vmlal.u32	q6,d20,d1[0]
-	vmlal.u32	q7,d22,d1[0]
-
-	vmlal.u32	q8,d22,d3[0]
-	vmlal.u32	q5,d26,d4[0]
-	vmlal.u32	q9,d24,d3[0]
-	vmlal.u32	q6,d28,d4[0]
-	vmlal.u32	q7,d20,d3[0]
-
-	vmlal.u32	q8,d20,d5[0]
-	vmlal.u32	q5,d24,d6[0]
-	vmlal.u32	q9,d22,d5[0]
-	vmlal.u32	q6,d26,d6[0]
-	vmlal.u32	q8,d28,d8[0]
-
-	vmlal.u32	q7,d28,d6[0]
-	vmlal.u32	q5,d22,d8[0]
-	vmlal.u32	q9,d20,d7[0]
-	vmov.i32	q14,#1<<24		@ padbit, yes, always
-	vmlal.u32	q6,d24,d8[0]
-	vmlal.u32	q7,d26,d8[0]
-
-	vld4.32		{d20,d22,d24,d26},[r1]	@ inp[0:1]
-	add		r1,r1,#64
-# ifdef	__ARMEB__
-	vrev32.8	q10,q10
-	vrev32.8	q11,q11
-	vrev32.8	q12,q12
-	vrev32.8	q13,q13
-# endif
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ lazy reduction interleaved with base 2^32 -> base 2^26 of
-	@ inp[0:3] previously loaded to q10-q13 and smashed to q10-q14.
-
-	vshr.u64	q15,q8,#26
-	vmovn.i64	d16,q8
-	 vshr.u64	q4,q5,#26
-	 vmovn.i64	d10,q5
-	vadd.i64	q9,q9,q15		@ h3 -> h4
-	vbic.i32	d16,#0xfc000000
-	  vsri.u32	q14,q13,#8		@ base 2^32 -> base 2^26
-	 vadd.i64	q6,q6,q4		@ h0 -> h1
-	  vshl.u32	q13,q13,#18
-	 vbic.i32	d10,#0xfc000000
-
-	vshrn.u64	d30,q9,#26
-	vmovn.i64	d18,q9
-	 vshr.u64	q4,q6,#26
-	 vmovn.i64	d12,q6
-	 vadd.i64	q7,q7,q4		@ h1 -> h2
-	  vsri.u32	q13,q12,#14
-	vbic.i32	d18,#0xfc000000
-	  vshl.u32	q12,q12,#12
-	 vbic.i32	d12,#0xfc000000
-
-	vadd.i32	d10,d10,d30
-	vshl.u32	d30,d30,#2
-	  vbic.i32	q13,#0xfc000000
-	 vshrn.u64	d8,q7,#26
-	 vmovn.i64	d14,q7
-	vaddl.u32	q5,d10,d30	@ h4 -> h0 [widen for a sec]
-	  vsri.u32	q12,q11,#20
-	 vadd.i32	d16,d16,d8	@ h2 -> h3
-	  vshl.u32	q11,q11,#6
-	 vbic.i32	d14,#0xfc000000
-	  vbic.i32	q12,#0xfc000000
-
-	vshrn.u64	d30,q5,#26		@ re-narrow
-	vmovn.i64	d10,q5
-	  vsri.u32	q11,q10,#26
-	  vbic.i32	q10,#0xfc000000
-	 vshr.u32	d8,d16,#26
-	 vbic.i32	d16,#0xfc000000
-	vbic.i32	d10,#0xfc000000
-	vadd.i32	d12,d12,d30	@ h0 -> h1
-	 vadd.i32	d18,d18,d8	@ h3 -> h4
-	  vbic.i32	q11,#0xfc000000
-
-	bhi		.Loop_neon
-
-.Lskip_loop:
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1
-
-	add		r7,r0,#(48+0*9*4)
-	add		r6,r0,#(48+1*9*4)
-	adds		r2,r2,#32
-	it		ne
-	movne		r2,#0
-	bne		.Long_tail
-
-	vadd.i32	d25,d24,d14	@ add hash value and move to #hi
-	vadd.i32	d21,d20,d10
-	vadd.i32	d27,d26,d16
-	vadd.i32	d23,d22,d12
-	vadd.i32	d29,d28,d18
-
-.Long_tail:
-	vld4.32		{d0[1],d1[1],d2[1],d3[1]},[r7]!	@ load r^1
-	vld4.32		{d0[0],d1[0],d2[0],d3[0]},[r6]!	@ load r^2
-
-	vadd.i32	d24,d24,d14	@ can be redundant
-	vmull.u32	q7,d25,d0
-	vadd.i32	d20,d20,d10
-	vmull.u32	q5,d21,d0
-	vadd.i32	d26,d26,d16
-	vmull.u32	q8,d27,d0
-	vadd.i32	d22,d22,d12
-	vmull.u32	q6,d23,d0
-	vadd.i32	d28,d28,d18
-	vmull.u32	q9,d29,d0
-
-	vmlal.u32	q5,d29,d2
-	vld4.32		{d4[1],d5[1],d6[1],d7[1]},[r7]!
-	vmlal.u32	q8,d25,d1
-	vld4.32		{d4[0],d5[0],d6[0],d7[0]},[r6]!
-	vmlal.u32	q6,d21,d1
-	vmlal.u32	q9,d27,d1
-	vmlal.u32	q7,d23,d1
-
-	vmlal.u32	q8,d23,d3
-	vld1.32		d8[1],[r7,:32]
-	vmlal.u32	q5,d27,d4
-	vld1.32		d8[0],[r6,:32]
-	vmlal.u32	q9,d25,d3
-	vmlal.u32	q6,d29,d4
-	vmlal.u32	q7,d21,d3
-
-	vmlal.u32	q8,d21,d5
-	 it		ne
-	 addne		r7,r0,#(48+2*9*4)
-	vmlal.u32	q5,d25,d6
-	 it		ne
-	 addne		r6,r0,#(48+3*9*4)
-	vmlal.u32	q9,d23,d5
-	vmlal.u32	q6,d27,d6
-	vmlal.u32	q7,d29,d6
-
-	vmlal.u32	q8,d29,d8
-	 vorn		q0,q0,q0	@ all-ones, can be redundant
-	vmlal.u32	q5,d23,d8
-	 vshr.u64	q0,q0,#38
-	vmlal.u32	q9,d21,d7
-	vmlal.u32	q6,d25,d8
-	vmlal.u32	q7,d27,d8
-
-	beq		.Lshort_tail
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ (hash+inp[0:1])*r^4:r^3 and accumulate
-
-	vld4.32		{d0[1],d1[1],d2[1],d3[1]},[r7]!	@ load r^3
-	vld4.32		{d0[0],d1[0],d2[0],d3[0]},[r6]!	@ load r^4
-
-	vmlal.u32	q7,d24,d0
-	vmlal.u32	q5,d20,d0
-	vmlal.u32	q8,d26,d0
-	vmlal.u32	q6,d22,d0
-	vmlal.u32	q9,d28,d0
-
-	vmlal.u32	q5,d28,d2
-	vld4.32		{d4[1],d5[1],d6[1],d7[1]},[r7]!
-	vmlal.u32	q8,d24,d1
-	vld4.32		{d4[0],d5[0],d6[0],d7[0]},[r6]!
-	vmlal.u32	q6,d20,d1
-	vmlal.u32	q9,d26,d1
-	vmlal.u32	q7,d22,d1
-
-	vmlal.u32	q8,d22,d3
-	vld1.32		d8[1],[r7,:32]
-	vmlal.u32	q5,d26,d4
-	vld1.32		d8[0],[r6,:32]
-	vmlal.u32	q9,d24,d3
-	vmlal.u32	q6,d28,d4
-	vmlal.u32	q7,d20,d3
-
-	vmlal.u32	q8,d20,d5
-	vmlal.u32	q5,d24,d6
-	vmlal.u32	q9,d22,d5
-	vmlal.u32	q6,d26,d6
-	vmlal.u32	q7,d28,d6
-
-	vmlal.u32	q8,d28,d8
-	 vorn		q0,q0,q0	@ all-ones
-	vmlal.u32	q5,d22,d8
-	 vshr.u64	q0,q0,#38
-	vmlal.u32	q9,d20,d7
-	vmlal.u32	q6,d24,d8
-	vmlal.u32	q7,d26,d8
-
-.Lshort_tail:
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ horizontal addition
-
-	vadd.i64	d16,d16,d17
-	vadd.i64	d10,d10,d11
-	vadd.i64	d18,d18,d19
-	vadd.i64	d12,d12,d13
-	vadd.i64	d14,d14,d15
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ lazy reduction, but without narrowing
-
-	vshr.u64	q15,q8,#26
-	vand.i64	q8,q8,q0
-	 vshr.u64	q4,q5,#26
-	 vand.i64	q5,q5,q0
-	vadd.i64	q9,q9,q15		@ h3 -> h4
-	 vadd.i64	q6,q6,q4		@ h0 -> h1
-
-	vshr.u64	q15,q9,#26
-	vand.i64	q9,q9,q0
-	 vshr.u64	q4,q6,#26
-	 vand.i64	q6,q6,q0
-	 vadd.i64	q7,q7,q4		@ h1 -> h2
-
-	vadd.i64	q5,q5,q15
-	vshl.u64	q15,q15,#2
-	 vshr.u64	q4,q7,#26
-	 vand.i64	q7,q7,q0
-	vadd.i64	q5,q5,q15		@ h4 -> h0
-	 vadd.i64	q8,q8,q4		@ h2 -> h3
-
-	vshr.u64	q15,q5,#26
-	vand.i64	q5,q5,q0
-	 vshr.u64	q4,q8,#26
-	 vand.i64	q8,q8,q0
-	vadd.i64	q6,q6,q15		@ h0 -> h1
-	 vadd.i64	q9,q9,q4		@ h3 -> h4
-
-	cmp		r2,#0
-	bne		.Leven
-
-	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
-	@ store hash value
-
-	vst4.32		{d10[0],d12[0],d14[0],d16[0]},[r0]!
-	vst1.32		{d18[0]},[r0]
-
-	vldmia	sp!,{d8-d15}			@ epilogue
-	ldmia	sp!,{r4-r7}
-	bx	lr					@ bx	lr
-.size	poly1305_blocks_neon,.-poly1305_blocks_neon
-
-.align	5
-.Lzeros:
-.long	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
-#ifndef	__KERNEL__
-.LOPENSSL_armcap:
-# ifdef	_WIN32
-.word	OPENSSL_armcap_P
-# else
-.word	OPENSSL_armcap_P-.Lpoly1305_init
-# endif
-.comm	OPENSSL_armcap_P,4,4
-.hidden	OPENSSL_armcap_P
-#endif
-#endif
-.asciz	"Poly1305 for ARMv4/NEON, CRYPTOGAMS by @dot-asm"
-.align	2
diff --git a/arch/arm/crypto/poly1305-glue.c b/arch/arm/crypto/poly1305-glue.c
index 3023c1acfa19..c31bd8f7c092 100644
--- a/arch/arm/crypto/poly1305-glue.c
+++ b/arch/arm/crypto/poly1305-glue.c
@@ -29,7 +29,7 @@ void __weak poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit)
 
 static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
 
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
 {
 	poly1305_init_arm(&dctx->h, key);
 	dctx->s[0] = get_unaligned_le32(key + 16);
diff --git a/arch/arm/crypto/sha1_glue.c b/arch/arm/crypto/sha1_glue.c
index 6c2b849e459d..95a727bcd664 100644
--- a/arch/arm/crypto/sha1_glue.c
+++ b/arch/arm/crypto/sha1_glue.c
@@ -21,31 +21,29 @@
 
 #include "sha1.h"
 
-asmlinkage void sha1_block_data_order(u32 *digest,
-		const unsigned char *data, unsigned int rounds);
+asmlinkage void sha1_block_data_order(struct sha1_state *digest,
+		const u8 *data, int rounds);
 
 int sha1_update_arm(struct shash_desc *desc, const u8 *data,
 		    unsigned int len)
 {
-	/* make sure casting to sha1_block_fn() is safe */
+	/* make sure signature matches sha1_block_fn() */
 	BUILD_BUG_ON(offsetof(struct sha1_state, state) != 0);
 
-	return sha1_base_do_update(desc, data, len,
-				   (sha1_block_fn *)sha1_block_data_order);
+	return sha1_base_do_update(desc, data, len, sha1_block_data_order);
 }
 EXPORT_SYMBOL_GPL(sha1_update_arm);
 
 static int sha1_final(struct shash_desc *desc, u8 *out)
 {
-	sha1_base_do_finalize(desc, (sha1_block_fn *)sha1_block_data_order);
+	sha1_base_do_finalize(desc, sha1_block_data_order);
 	return sha1_base_finish(desc, out);
 }
 
 int sha1_finup_arm(struct shash_desc *desc, const u8 *data,
 		   unsigned int len, u8 *out)
 {
-	sha1_base_do_update(desc, data, len,
-			    (sha1_block_fn *)sha1_block_data_order);
+	sha1_base_do_update(desc, data, len, sha1_block_data_order);
 	return sha1_final(desc, out);
 }
 EXPORT_SYMBOL_GPL(sha1_finup_arm);
diff --git a/arch/arm/crypto/sha256-core.S_shipped b/arch/arm/crypto/sha256-core.S_shipped
deleted file mode 100644
index 6363014a50d7..000000000000
--- a/arch/arm/crypto/sha256-core.S_shipped
+++ /dev/null
@@ -1,2816 +0,0 @@
-@ SPDX-License-Identifier: GPL-2.0
-
-@ This code is taken from the OpenSSL project but the author (Andy Polyakov)
-@ has relicensed it under the GPLv2. Therefore this program is free software;
-@ you can redistribute it and/or modify it under the terms of the GNU General
-@ Public License version 2 as published by the Free Software Foundation.
-@
-@ The original headers, including the original license headers, are
-@ included below for completeness.
-
-@ ====================================================================
-@ Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
-@ project. The module is, however, dual licensed under OpenSSL and
-@ CRYPTOGAMS licenses depending on where you obtain it. For further
-@ details see https://www.openssl.org/~appro/cryptogams/.
-@ ====================================================================
-
-@ SHA256 block procedure for ARMv4. May 2007.
-
-@ Performance is ~2x better than gcc 3.4 generated code and in "abso-
-@ lute" terms is ~2250 cycles per 64-byte block or ~35 cycles per
-@ byte [on single-issue Xscale PXA250 core].
-
-@ July 2010.
-@
-@ Rescheduling for dual-issue pipeline resulted in 22% improvement on
-@ Cortex A8 core and ~20 cycles per processed byte.
-
-@ February 2011.
-@
-@ Profiler-assisted and platform-specific optimization resulted in 16%
-@ improvement on Cortex A8 core and ~15.4 cycles per processed byte.
-
-@ September 2013.
-@
-@ Add NEON implementation. On Cortex A8 it was measured to process one
-@ byte in 12.5 cycles or 23% faster than integer-only code. Snapdragon
-@ S4 does it in 12.5 cycles too, but it's 50% faster than integer-only
-@ code (meaning that latter performs sub-optimally, nothing was done
-@ about it).
-
-@ May 2014.
-@
-@ Add ARMv8 code path performing at 2.0 cpb on Apple A7.
-
-#ifndef __KERNEL__
-# include "arm_arch.h"
-#else
-# define __ARM_ARCH__ __LINUX_ARM_ARCH__
-# define __ARM_MAX_ARCH__ 7
-#endif
-
-.text
-#if __ARM_ARCH__<7
-.code	32
-#else
-.syntax unified
-# ifdef __thumb2__
-.thumb
-# else
-.code   32
-# endif
-#endif
-
-.type	K256,%object
-.align	5
-K256:
-.word	0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5
-.word	0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5
-.word	0xd807aa98,0x12835b01,0x243185be,0x550c7dc3
-.word	0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174
-.word	0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc
-.word	0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da
-.word	0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7
-.word	0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967
-.word	0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13
-.word	0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85
-.word	0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3
-.word	0xd192e819,0xd6990624,0xf40e3585,0x106aa070
-.word	0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5
-.word	0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3
-.word	0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
-.word	0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
-.size	K256,.-K256
-.word	0				@ terminator
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-.LOPENSSL_armcap:
-.word	OPENSSL_armcap_P-sha256_block_data_order
-#endif
-.align	5
-
-.global	sha256_block_data_order
-.type	sha256_block_data_order,%function
-sha256_block_data_order:
-.Lsha256_block_data_order:
-#if __ARM_ARCH__<7
-	sub	r3,pc,#8		@ sha256_block_data_order
-#else
-	adr	r3,.Lsha256_block_data_order
-#endif
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-	ldr	r12,.LOPENSSL_armcap
-	ldr	r12,[r3,r12]		@ OPENSSL_armcap_P
-	tst	r12,#ARMV8_SHA256
-	bne	.LARMv8
-	tst	r12,#ARMV7_NEON
-	bne	.LNEON
-#endif
-	add	r2,r1,r2,lsl#6	@ len to point at the end of inp
-	stmdb	sp!,{r0,r1,r2,r4-r11,lr}
-	ldmia	r0,{r4,r5,r6,r7,r8,r9,r10,r11}
-	sub	r14,r3,#256+32	@ K256
-	sub	sp,sp,#16*4		@ alloca(X[16])
-.Loop:
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r5,r6		@ magic
-	eor	r12,r12,r12
-#if __ARM_ARCH__>=7
-	@ ldr	r2,[r1],#4			@ 0
-# if 0==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r8,r8,ror#5
-	add	r4,r4,r12			@ h+=Maj(a,b,c) from the past
-	eor	r0,r0,r8,ror#19	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	r2,r2
-# endif
-#else
-	@ ldrb	r2,[r1,#3]			@ 0
-	add	r4,r4,r12			@ h+=Maj(a,b,c) from the past
-	ldrb	r12,[r1,#2]
-	ldrb	r0,[r1,#1]
-	orr	r2,r2,r12,lsl#8
-	ldrb	r12,[r1],#4
-	orr	r2,r2,r0,lsl#16
-# if 0==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r8,r8,ror#5
-	orr	r2,r2,r12,lsl#24
-	eor	r0,r0,r8,ror#19	@ Sigma1(e)
-#endif
-	ldr	r12,[r14],#4			@ *K256++
-	add	r11,r11,r2			@ h+=X[i]
-	str	r2,[sp,#0*4]
-	eor	r2,r9,r10
-	add	r11,r11,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r8
-	add	r11,r11,r12			@ h+=K256[i]
-	eor	r2,r2,r10			@ Ch(e,f,g)
-	eor	r0,r4,r4,ror#11
-	add	r11,r11,r2			@ h+=Ch(e,f,g)
-#if 0==31
-	and	r12,r12,#0xff
-	cmp	r12,#0xf2			@ done?
-#endif
-#if 0<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r12,r4,r5			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#2*4]		@ from future BODY_16_xx
-	eor	r12,r4,r5			@ a^b, b^c in next round
-	ldr	r1,[sp,#15*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r4,ror#20	@ Sigma0(a)
-	and	r3,r3,r12			@ (b^c)&=(a^b)
-	add	r7,r7,r11			@ d+=h
-	eor	r3,r3,r5			@ Maj(a,b,c)
-	add	r11,r11,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r11,r11,r3			@ h+=Maj(a,b,c)
-#if __ARM_ARCH__>=7
-	@ ldr	r2,[r1],#4			@ 1
-# if 1==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r7,r7,ror#5
-	add	r11,r11,r3			@ h+=Maj(a,b,c) from the past
-	eor	r0,r0,r7,ror#19	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	r2,r2
-# endif
-#else
-	@ ldrb	r2,[r1,#3]			@ 1
-	add	r11,r11,r3			@ h+=Maj(a,b,c) from the past
-	ldrb	r3,[r1,#2]
-	ldrb	r0,[r1,#1]
-	orr	r2,r2,r3,lsl#8
-	ldrb	r3,[r1],#4
-	orr	r2,r2,r0,lsl#16
-# if 1==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r7,r7,ror#5
-	orr	r2,r2,r3,lsl#24
-	eor	r0,r0,r7,ror#19	@ Sigma1(e)
-#endif
-	ldr	r3,[r14],#4			@ *K256++
-	add	r10,r10,r2			@ h+=X[i]
-	str	r2,[sp,#1*4]
-	eor	r2,r8,r9
-	add	r10,r10,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r7
-	add	r10,r10,r3			@ h+=K256[i]
-	eor	r2,r2,r9			@ Ch(e,f,g)
-	eor	r0,r11,r11,ror#11
-	add	r10,r10,r2			@ h+=Ch(e,f,g)
-#if 1==31
-	and	r3,r3,#0xff
-	cmp	r3,#0xf2			@ done?
-#endif
-#if 1<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r11,r4			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#3*4]		@ from future BODY_16_xx
-	eor	r3,r11,r4			@ a^b, b^c in next round
-	ldr	r1,[sp,#0*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r11,ror#20	@ Sigma0(a)
-	and	r12,r12,r3			@ (b^c)&=(a^b)
-	add	r6,r6,r10			@ d+=h
-	eor	r12,r12,r4			@ Maj(a,b,c)
-	add	r10,r10,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r10,r10,r12			@ h+=Maj(a,b,c)
-#if __ARM_ARCH__>=7
-	@ ldr	r2,[r1],#4			@ 2
-# if 2==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r6,r6,ror#5
-	add	r10,r10,r12			@ h+=Maj(a,b,c) from the past
-	eor	r0,r0,r6,ror#19	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	r2,r2
-# endif
-#else
-	@ ldrb	r2,[r1,#3]			@ 2
-	add	r10,r10,r12			@ h+=Maj(a,b,c) from the past
-	ldrb	r12,[r1,#2]
-	ldrb	r0,[r1,#1]
-	orr	r2,r2,r12,lsl#8
-	ldrb	r12,[r1],#4
-	orr	r2,r2,r0,lsl#16
-# if 2==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r6,r6,ror#5
-	orr	r2,r2,r12,lsl#24
-	eor	r0,r0,r6,ror#19	@ Sigma1(e)
-#endif
-	ldr	r12,[r14],#4			@ *K256++
-	add	r9,r9,r2			@ h+=X[i]
-	str	r2,[sp,#2*4]
-	eor	r2,r7,r8
-	add	r9,r9,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r6
-	add	r9,r9,r12			@ h+=K256[i]
-	eor	r2,r2,r8			@ Ch(e,f,g)
-	eor	r0,r10,r10,ror#11
-	add	r9,r9,r2			@ h+=Ch(e,f,g)
-#if 2==31
-	and	r12,r12,#0xff
-	cmp	r12,#0xf2			@ done?
-#endif
-#if 2<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r12,r10,r11			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#4*4]		@ from future BODY_16_xx
-	eor	r12,r10,r11			@ a^b, b^c in next round
-	ldr	r1,[sp,#1*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r10,ror#20	@ Sigma0(a)
-	and	r3,r3,r12			@ (b^c)&=(a^b)
-	add	r5,r5,r9			@ d+=h
-	eor	r3,r3,r11			@ Maj(a,b,c)
-	add	r9,r9,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r9,r9,r3			@ h+=Maj(a,b,c)
-#if __ARM_ARCH__>=7
-	@ ldr	r2,[r1],#4			@ 3
-# if 3==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r5,r5,ror#5
-	add	r9,r9,r3			@ h+=Maj(a,b,c) from the past
-	eor	r0,r0,r5,ror#19	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	r2,r2
-# endif
-#else
-	@ ldrb	r2,[r1,#3]			@ 3
-	add	r9,r9,r3			@ h+=Maj(a,b,c) from the past
-	ldrb	r3,[r1,#2]
-	ldrb	r0,[r1,#1]
-	orr	r2,r2,r3,lsl#8
-	ldrb	r3,[r1],#4
-	orr	r2,r2,r0,lsl#16
-# if 3==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r5,r5,ror#5
-	orr	r2,r2,r3,lsl#24
-	eor	r0,r0,r5,ror#19	@ Sigma1(e)
-#endif
-	ldr	r3,[r14],#4			@ *K256++
-	add	r8,r8,r2			@ h+=X[i]
-	str	r2,[sp,#3*4]
-	eor	r2,r6,r7
-	add	r8,r8,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r5
-	add	r8,r8,r3			@ h+=K256[i]
-	eor	r2,r2,r7			@ Ch(e,f,g)
-	eor	r0,r9,r9,ror#11
-	add	r8,r8,r2			@ h+=Ch(e,f,g)
-#if 3==31
-	and	r3,r3,#0xff
-	cmp	r3,#0xf2			@ done?
-#endif
-#if 3<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r9,r10			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#5*4]		@ from future BODY_16_xx
-	eor	r3,r9,r10			@ a^b, b^c in next round
-	ldr	r1,[sp,#2*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r9,ror#20	@ Sigma0(a)
-	and	r12,r12,r3			@ (b^c)&=(a^b)
-	add	r4,r4,r8			@ d+=h
-	eor	r12,r12,r10			@ Maj(a,b,c)
-	add	r8,r8,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r8,r8,r12			@ h+=Maj(a,b,c)
-#if __ARM_ARCH__>=7
-	@ ldr	r2,[r1],#4			@ 4
-# if 4==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r4,r4,ror#5
-	add	r8,r8,r12			@ h+=Maj(a,b,c) from the past
-	eor	r0,r0,r4,ror#19	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	r2,r2
-# endif
-#else
-	@ ldrb	r2,[r1,#3]			@ 4
-	add	r8,r8,r12			@ h+=Maj(a,b,c) from the past
-	ldrb	r12,[r1,#2]
-	ldrb	r0,[r1,#1]
-	orr	r2,r2,r12,lsl#8
-	ldrb	r12,[r1],#4
-	orr	r2,r2,r0,lsl#16
-# if 4==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r4,r4,ror#5
-	orr	r2,r2,r12,lsl#24
-	eor	r0,r0,r4,ror#19	@ Sigma1(e)
-#endif
-	ldr	r12,[r14],#4			@ *K256++
-	add	r7,r7,r2			@ h+=X[i]
-	str	r2,[sp,#4*4]
-	eor	r2,r5,r6
-	add	r7,r7,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r4
-	add	r7,r7,r12			@ h+=K256[i]
-	eor	r2,r2,r6			@ Ch(e,f,g)
-	eor	r0,r8,r8,ror#11
-	add	r7,r7,r2			@ h+=Ch(e,f,g)
-#if 4==31
-	and	r12,r12,#0xff
-	cmp	r12,#0xf2			@ done?
-#endif
-#if 4<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r12,r8,r9			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#6*4]		@ from future BODY_16_xx
-	eor	r12,r8,r9			@ a^b, b^c in next round
-	ldr	r1,[sp,#3*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r8,ror#20	@ Sigma0(a)
-	and	r3,r3,r12			@ (b^c)&=(a^b)
-	add	r11,r11,r7			@ d+=h
-	eor	r3,r3,r9			@ Maj(a,b,c)
-	add	r7,r7,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r7,r7,r3			@ h+=Maj(a,b,c)
-#if __ARM_ARCH__>=7
-	@ ldr	r2,[r1],#4			@ 5
-# if 5==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r11,r11,ror#5
-	add	r7,r7,r3			@ h+=Maj(a,b,c) from the past
-	eor	r0,r0,r11,ror#19	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	r2,r2
-# endif
-#else
-	@ ldrb	r2,[r1,#3]			@ 5
-	add	r7,r7,r3			@ h+=Maj(a,b,c) from the past
-	ldrb	r3,[r1,#2]
-	ldrb	r0,[r1,#1]
-	orr	r2,r2,r3,lsl#8
-	ldrb	r3,[r1],#4
-	orr	r2,r2,r0,lsl#16
-# if 5==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r11,r11,ror#5
-	orr	r2,r2,r3,lsl#24
-	eor	r0,r0,r11,ror#19	@ Sigma1(e)
-#endif
-	ldr	r3,[r14],#4			@ *K256++
-	add	r6,r6,r2			@ h+=X[i]
-	str	r2,[sp,#5*4]
-	eor	r2,r4,r5
-	add	r6,r6,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r11
-	add	r6,r6,r3			@ h+=K256[i]
-	eor	r2,r2,r5			@ Ch(e,f,g)
-	eor	r0,r7,r7,ror#11
-	add	r6,r6,r2			@ h+=Ch(e,f,g)
-#if 5==31
-	and	r3,r3,#0xff
-	cmp	r3,#0xf2			@ done?
-#endif
-#if 5<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r7,r8			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#7*4]		@ from future BODY_16_xx
-	eor	r3,r7,r8			@ a^b, b^c in next round
-	ldr	r1,[sp,#4*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r7,ror#20	@ Sigma0(a)
-	and	r12,r12,r3			@ (b^c)&=(a^b)
-	add	r10,r10,r6			@ d+=h
-	eor	r12,r12,r8			@ Maj(a,b,c)
-	add	r6,r6,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r6,r6,r12			@ h+=Maj(a,b,c)
-#if __ARM_ARCH__>=7
-	@ ldr	r2,[r1],#4			@ 6
-# if 6==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r10,r10,ror#5
-	add	r6,r6,r12			@ h+=Maj(a,b,c) from the past
-	eor	r0,r0,r10,ror#19	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	r2,r2
-# endif
-#else
-	@ ldrb	r2,[r1,#3]			@ 6
-	add	r6,r6,r12			@ h+=Maj(a,b,c) from the past
-	ldrb	r12,[r1,#2]
-	ldrb	r0,[r1,#1]
-	orr	r2,r2,r12,lsl#8
-	ldrb	r12,[r1],#4
-	orr	r2,r2,r0,lsl#16
-# if 6==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r10,r10,ror#5
-	orr	r2,r2,r12,lsl#24
-	eor	r0,r0,r10,ror#19	@ Sigma1(e)
-#endif
-	ldr	r12,[r14],#4			@ *K256++
-	add	r5,r5,r2			@ h+=X[i]
-	str	r2,[sp,#6*4]
-	eor	r2,r11,r4
-	add	r5,r5,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r10
-	add	r5,r5,r12			@ h+=K256[i]
-	eor	r2,r2,r4			@ Ch(e,f,g)
-	eor	r0,r6,r6,ror#11
-	add	r5,r5,r2			@ h+=Ch(e,f,g)
-#if 6==31
-	and	r12,r12,#0xff
-	cmp	r12,#0xf2			@ done?
-#endif
-#if 6<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r12,r6,r7			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#8*4]		@ from future BODY_16_xx
-	eor	r12,r6,r7			@ a^b, b^c in next round
-	ldr	r1,[sp,#5*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r6,ror#20	@ Sigma0(a)
-	and	r3,r3,r12			@ (b^c)&=(a^b)
-	add	r9,r9,r5			@ d+=h
-	eor	r3,r3,r7			@ Maj(a,b,c)
-	add	r5,r5,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r5,r5,r3			@ h+=Maj(a,b,c)
-#if __ARM_ARCH__>=7
-	@ ldr	r2,[r1],#4			@ 7
-# if 7==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r9,r9,ror#5
-	add	r5,r5,r3			@ h+=Maj(a,b,c) from the past
-	eor	r0,r0,r9,ror#19	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	r2,r2
-# endif
-#else
-	@ ldrb	r2,[r1,#3]			@ 7
-	add	r5,r5,r3			@ h+=Maj(a,b,c) from the past
-	ldrb	r3,[r1,#2]
-	ldrb	r0,[r1,#1]
-	orr	r2,r2,r3,lsl#8
-	ldrb	r3,[r1],#4
-	orr	r2,r2,r0,lsl#16
-# if 7==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r9,r9,ror#5
-	orr	r2,r2,r3,lsl#24
-	eor	r0,r0,r9,ror#19	@ Sigma1(e)
-#endif
-	ldr	r3,[r14],#4			@ *K256++
-	add	r4,r4,r2			@ h+=X[i]
-	str	r2,[sp,#7*4]
-	eor	r2,r10,r11
-	add	r4,r4,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r9
-	add	r4,r4,r3			@ h+=K256[i]
-	eor	r2,r2,r11			@ Ch(e,f,g)
-	eor	r0,r5,r5,ror#11
-	add	r4,r4,r2			@ h+=Ch(e,f,g)
-#if 7==31
-	and	r3,r3,#0xff
-	cmp	r3,#0xf2			@ done?
-#endif
-#if 7<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r5,r6			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#9*4]		@ from future BODY_16_xx
-	eor	r3,r5,r6			@ a^b, b^c in next round
-	ldr	r1,[sp,#6*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r5,ror#20	@ Sigma0(a)
-	and	r12,r12,r3			@ (b^c)&=(a^b)
-	add	r8,r8,r4			@ d+=h
-	eor	r12,r12,r6			@ Maj(a,b,c)
-	add	r4,r4,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r4,r4,r12			@ h+=Maj(a,b,c)
-#if __ARM_ARCH__>=7
-	@ ldr	r2,[r1],#4			@ 8
-# if 8==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r8,r8,ror#5
-	add	r4,r4,r12			@ h+=Maj(a,b,c) from the past
-	eor	r0,r0,r8,ror#19	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	r2,r2
-# endif
-#else
-	@ ldrb	r2,[r1,#3]			@ 8
-	add	r4,r4,r12			@ h+=Maj(a,b,c) from the past
-	ldrb	r12,[r1,#2]
-	ldrb	r0,[r1,#1]
-	orr	r2,r2,r12,lsl#8
-	ldrb	r12,[r1],#4
-	orr	r2,r2,r0,lsl#16
-# if 8==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r8,r8,ror#5
-	orr	r2,r2,r12,lsl#24
-	eor	r0,r0,r8,ror#19	@ Sigma1(e)
-#endif
-	ldr	r12,[r14],#4			@ *K256++
-	add	r11,r11,r2			@ h+=X[i]
-	str	r2,[sp,#8*4]
-	eor	r2,r9,r10
-	add	r11,r11,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r8
-	add	r11,r11,r12			@ h+=K256[i]
-	eor	r2,r2,r10			@ Ch(e,f,g)
-	eor	r0,r4,r4,ror#11
-	add	r11,r11,r2			@ h+=Ch(e,f,g)
-#if 8==31
-	and	r12,r12,#0xff
-	cmp	r12,#0xf2			@ done?
-#endif
-#if 8<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r12,r4,r5			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#10*4]		@ from future BODY_16_xx
-	eor	r12,r4,r5			@ a^b, b^c in next round
-	ldr	r1,[sp,#7*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r4,ror#20	@ Sigma0(a)
-	and	r3,r3,r12			@ (b^c)&=(a^b)
-	add	r7,r7,r11			@ d+=h
-	eor	r3,r3,r5			@ Maj(a,b,c)
-	add	r11,r11,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r11,r11,r3			@ h+=Maj(a,b,c)
-#if __ARM_ARCH__>=7
-	@ ldr	r2,[r1],#4			@ 9
-# if 9==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r7,r7,ror#5
-	add	r11,r11,r3			@ h+=Maj(a,b,c) from the past
-	eor	r0,r0,r7,ror#19	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	r2,r2
-# endif
-#else
-	@ ldrb	r2,[r1,#3]			@ 9
-	add	r11,r11,r3			@ h+=Maj(a,b,c) from the past
-	ldrb	r3,[r1,#2]
-	ldrb	r0,[r1,#1]
-	orr	r2,r2,r3,lsl#8
-	ldrb	r3,[r1],#4
-	orr	r2,r2,r0,lsl#16
-# if 9==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r7,r7,ror#5
-	orr	r2,r2,r3,lsl#24
-	eor	r0,r0,r7,ror#19	@ Sigma1(e)
-#endif
-	ldr	r3,[r14],#4			@ *K256++
-	add	r10,r10,r2			@ h+=X[i]
-	str	r2,[sp,#9*4]
-	eor	r2,r8,r9
-	add	r10,r10,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r7
-	add	r10,r10,r3			@ h+=K256[i]
-	eor	r2,r2,r9			@ Ch(e,f,g)
-	eor	r0,r11,r11,ror#11
-	add	r10,r10,r2			@ h+=Ch(e,f,g)
-#if 9==31
-	and	r3,r3,#0xff
-	cmp	r3,#0xf2			@ done?
-#endif
-#if 9<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r11,r4			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#11*4]		@ from future BODY_16_xx
-	eor	r3,r11,r4			@ a^b, b^c in next round
-	ldr	r1,[sp,#8*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r11,ror#20	@ Sigma0(a)
-	and	r12,r12,r3			@ (b^c)&=(a^b)
-	add	r6,r6,r10			@ d+=h
-	eor	r12,r12,r4			@ Maj(a,b,c)
-	add	r10,r10,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r10,r10,r12			@ h+=Maj(a,b,c)
-#if __ARM_ARCH__>=7
-	@ ldr	r2,[r1],#4			@ 10
-# if 10==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r6,r6,ror#5
-	add	r10,r10,r12			@ h+=Maj(a,b,c) from the past
-	eor	r0,r0,r6,ror#19	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	r2,r2
-# endif
-#else
-	@ ldrb	r2,[r1,#3]			@ 10
-	add	r10,r10,r12			@ h+=Maj(a,b,c) from the past
-	ldrb	r12,[r1,#2]
-	ldrb	r0,[r1,#1]
-	orr	r2,r2,r12,lsl#8
-	ldrb	r12,[r1],#4
-	orr	r2,r2,r0,lsl#16
-# if 10==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r6,r6,ror#5
-	orr	r2,r2,r12,lsl#24
-	eor	r0,r0,r6,ror#19	@ Sigma1(e)
-#endif
-	ldr	r12,[r14],#4			@ *K256++
-	add	r9,r9,r2			@ h+=X[i]
-	str	r2,[sp,#10*4]
-	eor	r2,r7,r8
-	add	r9,r9,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r6
-	add	r9,r9,r12			@ h+=K256[i]
-	eor	r2,r2,r8			@ Ch(e,f,g)
-	eor	r0,r10,r10,ror#11
-	add	r9,r9,r2			@ h+=Ch(e,f,g)
-#if 10==31
-	and	r12,r12,#0xff
-	cmp	r12,#0xf2			@ done?
-#endif
-#if 10<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r12,r10,r11			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#12*4]		@ from future BODY_16_xx
-	eor	r12,r10,r11			@ a^b, b^c in next round
-	ldr	r1,[sp,#9*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r10,ror#20	@ Sigma0(a)
-	and	r3,r3,r12			@ (b^c)&=(a^b)
-	add	r5,r5,r9			@ d+=h
-	eor	r3,r3,r11			@ Maj(a,b,c)
-	add	r9,r9,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r9,r9,r3			@ h+=Maj(a,b,c)
-#if __ARM_ARCH__>=7
-	@ ldr	r2,[r1],#4			@ 11
-# if 11==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r5,r5,ror#5
-	add	r9,r9,r3			@ h+=Maj(a,b,c) from the past
-	eor	r0,r0,r5,ror#19	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	r2,r2
-# endif
-#else
-	@ ldrb	r2,[r1,#3]			@ 11
-	add	r9,r9,r3			@ h+=Maj(a,b,c) from the past
-	ldrb	r3,[r1,#2]
-	ldrb	r0,[r1,#1]
-	orr	r2,r2,r3,lsl#8
-	ldrb	r3,[r1],#4
-	orr	r2,r2,r0,lsl#16
-# if 11==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r5,r5,ror#5
-	orr	r2,r2,r3,lsl#24
-	eor	r0,r0,r5,ror#19	@ Sigma1(e)
-#endif
-	ldr	r3,[r14],#4			@ *K256++
-	add	r8,r8,r2			@ h+=X[i]
-	str	r2,[sp,#11*4]
-	eor	r2,r6,r7
-	add	r8,r8,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r5
-	add	r8,r8,r3			@ h+=K256[i]
-	eor	r2,r2,r7			@ Ch(e,f,g)
-	eor	r0,r9,r9,ror#11
-	add	r8,r8,r2			@ h+=Ch(e,f,g)
-#if 11==31
-	and	r3,r3,#0xff
-	cmp	r3,#0xf2			@ done?
-#endif
-#if 11<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r9,r10			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#13*4]		@ from future BODY_16_xx
-	eor	r3,r9,r10			@ a^b, b^c in next round
-	ldr	r1,[sp,#10*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r9,ror#20	@ Sigma0(a)
-	and	r12,r12,r3			@ (b^c)&=(a^b)
-	add	r4,r4,r8			@ d+=h
-	eor	r12,r12,r10			@ Maj(a,b,c)
-	add	r8,r8,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r8,r8,r12			@ h+=Maj(a,b,c)
-#if __ARM_ARCH__>=7
-	@ ldr	r2,[r1],#4			@ 12
-# if 12==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r4,r4,ror#5
-	add	r8,r8,r12			@ h+=Maj(a,b,c) from the past
-	eor	r0,r0,r4,ror#19	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	r2,r2
-# endif
-#else
-	@ ldrb	r2,[r1,#3]			@ 12
-	add	r8,r8,r12			@ h+=Maj(a,b,c) from the past
-	ldrb	r12,[r1,#2]
-	ldrb	r0,[r1,#1]
-	orr	r2,r2,r12,lsl#8
-	ldrb	r12,[r1],#4
-	orr	r2,r2,r0,lsl#16
-# if 12==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r4,r4,ror#5
-	orr	r2,r2,r12,lsl#24
-	eor	r0,r0,r4,ror#19	@ Sigma1(e)
-#endif
-	ldr	r12,[r14],#4			@ *K256++
-	add	r7,r7,r2			@ h+=X[i]
-	str	r2,[sp,#12*4]
-	eor	r2,r5,r6
-	add	r7,r7,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r4
-	add	r7,r7,r12			@ h+=K256[i]
-	eor	r2,r2,r6			@ Ch(e,f,g)
-	eor	r0,r8,r8,ror#11
-	add	r7,r7,r2			@ h+=Ch(e,f,g)
-#if 12==31
-	and	r12,r12,#0xff
-	cmp	r12,#0xf2			@ done?
-#endif
-#if 12<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r12,r8,r9			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#14*4]		@ from future BODY_16_xx
-	eor	r12,r8,r9			@ a^b, b^c in next round
-	ldr	r1,[sp,#11*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r8,ror#20	@ Sigma0(a)
-	and	r3,r3,r12			@ (b^c)&=(a^b)
-	add	r11,r11,r7			@ d+=h
-	eor	r3,r3,r9			@ Maj(a,b,c)
-	add	r7,r7,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r7,r7,r3			@ h+=Maj(a,b,c)
-#if __ARM_ARCH__>=7
-	@ ldr	r2,[r1],#4			@ 13
-# if 13==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r11,r11,ror#5
-	add	r7,r7,r3			@ h+=Maj(a,b,c) from the past
-	eor	r0,r0,r11,ror#19	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	r2,r2
-# endif
-#else
-	@ ldrb	r2,[r1,#3]			@ 13
-	add	r7,r7,r3			@ h+=Maj(a,b,c) from the past
-	ldrb	r3,[r1,#2]
-	ldrb	r0,[r1,#1]
-	orr	r2,r2,r3,lsl#8
-	ldrb	r3,[r1],#4
-	orr	r2,r2,r0,lsl#16
-# if 13==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r11,r11,ror#5
-	orr	r2,r2,r3,lsl#24
-	eor	r0,r0,r11,ror#19	@ Sigma1(e)
-#endif
-	ldr	r3,[r14],#4			@ *K256++
-	add	r6,r6,r2			@ h+=X[i]
-	str	r2,[sp,#13*4]
-	eor	r2,r4,r5
-	add	r6,r6,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r11
-	add	r6,r6,r3			@ h+=K256[i]
-	eor	r2,r2,r5			@ Ch(e,f,g)
-	eor	r0,r7,r7,ror#11
-	add	r6,r6,r2			@ h+=Ch(e,f,g)
-#if 13==31
-	and	r3,r3,#0xff
-	cmp	r3,#0xf2			@ done?
-#endif
-#if 13<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r7,r8			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#15*4]		@ from future BODY_16_xx
-	eor	r3,r7,r8			@ a^b, b^c in next round
-	ldr	r1,[sp,#12*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r7,ror#20	@ Sigma0(a)
-	and	r12,r12,r3			@ (b^c)&=(a^b)
-	add	r10,r10,r6			@ d+=h
-	eor	r12,r12,r8			@ Maj(a,b,c)
-	add	r6,r6,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r6,r6,r12			@ h+=Maj(a,b,c)
-#if __ARM_ARCH__>=7
-	@ ldr	r2,[r1],#4			@ 14
-# if 14==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r10,r10,ror#5
-	add	r6,r6,r12			@ h+=Maj(a,b,c) from the past
-	eor	r0,r0,r10,ror#19	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	r2,r2
-# endif
-#else
-	@ ldrb	r2,[r1,#3]			@ 14
-	add	r6,r6,r12			@ h+=Maj(a,b,c) from the past
-	ldrb	r12,[r1,#2]
-	ldrb	r0,[r1,#1]
-	orr	r2,r2,r12,lsl#8
-	ldrb	r12,[r1],#4
-	orr	r2,r2,r0,lsl#16
-# if 14==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r10,r10,ror#5
-	orr	r2,r2,r12,lsl#24
-	eor	r0,r0,r10,ror#19	@ Sigma1(e)
-#endif
-	ldr	r12,[r14],#4			@ *K256++
-	add	r5,r5,r2			@ h+=X[i]
-	str	r2,[sp,#14*4]
-	eor	r2,r11,r4
-	add	r5,r5,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r10
-	add	r5,r5,r12			@ h+=K256[i]
-	eor	r2,r2,r4			@ Ch(e,f,g)
-	eor	r0,r6,r6,ror#11
-	add	r5,r5,r2			@ h+=Ch(e,f,g)
-#if 14==31
-	and	r12,r12,#0xff
-	cmp	r12,#0xf2			@ done?
-#endif
-#if 14<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r12,r6,r7			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#0*4]		@ from future BODY_16_xx
-	eor	r12,r6,r7			@ a^b, b^c in next round
-	ldr	r1,[sp,#13*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r6,ror#20	@ Sigma0(a)
-	and	r3,r3,r12			@ (b^c)&=(a^b)
-	add	r9,r9,r5			@ d+=h
-	eor	r3,r3,r7			@ Maj(a,b,c)
-	add	r5,r5,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r5,r5,r3			@ h+=Maj(a,b,c)
-#if __ARM_ARCH__>=7
-	@ ldr	r2,[r1],#4			@ 15
-# if 15==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r9,r9,ror#5
-	add	r5,r5,r3			@ h+=Maj(a,b,c) from the past
-	eor	r0,r0,r9,ror#19	@ Sigma1(e)
-# ifndef __ARMEB__
-	rev	r2,r2
-# endif
-#else
-	@ ldrb	r2,[r1,#3]			@ 15
-	add	r5,r5,r3			@ h+=Maj(a,b,c) from the past
-	ldrb	r3,[r1,#2]
-	ldrb	r0,[r1,#1]
-	orr	r2,r2,r3,lsl#8
-	ldrb	r3,[r1],#4
-	orr	r2,r2,r0,lsl#16
-# if 15==15
-	str	r1,[sp,#17*4]			@ make room for r1
-# endif
-	eor	r0,r9,r9,ror#5
-	orr	r2,r2,r3,lsl#24
-	eor	r0,r0,r9,ror#19	@ Sigma1(e)
-#endif
-	ldr	r3,[r14],#4			@ *K256++
-	add	r4,r4,r2			@ h+=X[i]
-	str	r2,[sp,#15*4]
-	eor	r2,r10,r11
-	add	r4,r4,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r9
-	add	r4,r4,r3			@ h+=K256[i]
-	eor	r2,r2,r11			@ Ch(e,f,g)
-	eor	r0,r5,r5,ror#11
-	add	r4,r4,r2			@ h+=Ch(e,f,g)
-#if 15==31
-	and	r3,r3,#0xff
-	cmp	r3,#0xf2			@ done?
-#endif
-#if 15<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r5,r6			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#1*4]		@ from future BODY_16_xx
-	eor	r3,r5,r6			@ a^b, b^c in next round
-	ldr	r1,[sp,#14*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r5,ror#20	@ Sigma0(a)
-	and	r12,r12,r3			@ (b^c)&=(a^b)
-	add	r8,r8,r4			@ d+=h
-	eor	r12,r12,r6			@ Maj(a,b,c)
-	add	r4,r4,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r4,r4,r12			@ h+=Maj(a,b,c)
-.Lrounds_16_xx:
-	@ ldr	r2,[sp,#1*4]		@ 16
-	@ ldr	r1,[sp,#14*4]
-	mov	r0,r2,ror#7
-	add	r4,r4,r12			@ h+=Maj(a,b,c) from the past
-	mov	r12,r1,ror#17
-	eor	r0,r0,r2,ror#18
-	eor	r12,r12,r1,ror#19
-	eor	r0,r0,r2,lsr#3	@ sigma0(X[i+1])
-	ldr	r2,[sp,#0*4]
-	eor	r12,r12,r1,lsr#10	@ sigma1(X[i+14])
-	ldr	r1,[sp,#9*4]
-
-	add	r12,r12,r0
-	eor	r0,r8,r8,ror#5	@ from BODY_00_15
-	add	r2,r2,r12
-	eor	r0,r0,r8,ror#19	@ Sigma1(e)
-	add	r2,r2,r1			@ X[i]
-	ldr	r12,[r14],#4			@ *K256++
-	add	r11,r11,r2			@ h+=X[i]
-	str	r2,[sp,#0*4]
-	eor	r2,r9,r10
-	add	r11,r11,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r8
-	add	r11,r11,r12			@ h+=K256[i]
-	eor	r2,r2,r10			@ Ch(e,f,g)
-	eor	r0,r4,r4,ror#11
-	add	r11,r11,r2			@ h+=Ch(e,f,g)
-#if 16==31
-	and	r12,r12,#0xff
-	cmp	r12,#0xf2			@ done?
-#endif
-#if 16<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r12,r4,r5			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#2*4]		@ from future BODY_16_xx
-	eor	r12,r4,r5			@ a^b, b^c in next round
-	ldr	r1,[sp,#15*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r4,ror#20	@ Sigma0(a)
-	and	r3,r3,r12			@ (b^c)&=(a^b)
-	add	r7,r7,r11			@ d+=h
-	eor	r3,r3,r5			@ Maj(a,b,c)
-	add	r11,r11,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r11,r11,r3			@ h+=Maj(a,b,c)
-	@ ldr	r2,[sp,#2*4]		@ 17
-	@ ldr	r1,[sp,#15*4]
-	mov	r0,r2,ror#7
-	add	r11,r11,r3			@ h+=Maj(a,b,c) from the past
-	mov	r3,r1,ror#17
-	eor	r0,r0,r2,ror#18
-	eor	r3,r3,r1,ror#19
-	eor	r0,r0,r2,lsr#3	@ sigma0(X[i+1])
-	ldr	r2,[sp,#1*4]
-	eor	r3,r3,r1,lsr#10	@ sigma1(X[i+14])
-	ldr	r1,[sp,#10*4]
-
-	add	r3,r3,r0
-	eor	r0,r7,r7,ror#5	@ from BODY_00_15
-	add	r2,r2,r3
-	eor	r0,r0,r7,ror#19	@ Sigma1(e)
-	add	r2,r2,r1			@ X[i]
-	ldr	r3,[r14],#4			@ *K256++
-	add	r10,r10,r2			@ h+=X[i]
-	str	r2,[sp,#1*4]
-	eor	r2,r8,r9
-	add	r10,r10,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r7
-	add	r10,r10,r3			@ h+=K256[i]
-	eor	r2,r2,r9			@ Ch(e,f,g)
-	eor	r0,r11,r11,ror#11
-	add	r10,r10,r2			@ h+=Ch(e,f,g)
-#if 17==31
-	and	r3,r3,#0xff
-	cmp	r3,#0xf2			@ done?
-#endif
-#if 17<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r11,r4			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#3*4]		@ from future BODY_16_xx
-	eor	r3,r11,r4			@ a^b, b^c in next round
-	ldr	r1,[sp,#0*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r11,ror#20	@ Sigma0(a)
-	and	r12,r12,r3			@ (b^c)&=(a^b)
-	add	r6,r6,r10			@ d+=h
-	eor	r12,r12,r4			@ Maj(a,b,c)
-	add	r10,r10,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r10,r10,r12			@ h+=Maj(a,b,c)
-	@ ldr	r2,[sp,#3*4]		@ 18
-	@ ldr	r1,[sp,#0*4]
-	mov	r0,r2,ror#7
-	add	r10,r10,r12			@ h+=Maj(a,b,c) from the past
-	mov	r12,r1,ror#17
-	eor	r0,r0,r2,ror#18
-	eor	r12,r12,r1,ror#19
-	eor	r0,r0,r2,lsr#3	@ sigma0(X[i+1])
-	ldr	r2,[sp,#2*4]
-	eor	r12,r12,r1,lsr#10	@ sigma1(X[i+14])
-	ldr	r1,[sp,#11*4]
-
-	add	r12,r12,r0
-	eor	r0,r6,r6,ror#5	@ from BODY_00_15
-	add	r2,r2,r12
-	eor	r0,r0,r6,ror#19	@ Sigma1(e)
-	add	r2,r2,r1			@ X[i]
-	ldr	r12,[r14],#4			@ *K256++
-	add	r9,r9,r2			@ h+=X[i]
-	str	r2,[sp,#2*4]
-	eor	r2,r7,r8
-	add	r9,r9,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r6
-	add	r9,r9,r12			@ h+=K256[i]
-	eor	r2,r2,r8			@ Ch(e,f,g)
-	eor	r0,r10,r10,ror#11
-	add	r9,r9,r2			@ h+=Ch(e,f,g)
-#if 18==31
-	and	r12,r12,#0xff
-	cmp	r12,#0xf2			@ done?
-#endif
-#if 18<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r12,r10,r11			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#4*4]		@ from future BODY_16_xx
-	eor	r12,r10,r11			@ a^b, b^c in next round
-	ldr	r1,[sp,#1*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r10,ror#20	@ Sigma0(a)
-	and	r3,r3,r12			@ (b^c)&=(a^b)
-	add	r5,r5,r9			@ d+=h
-	eor	r3,r3,r11			@ Maj(a,b,c)
-	add	r9,r9,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r9,r9,r3			@ h+=Maj(a,b,c)
-	@ ldr	r2,[sp,#4*4]		@ 19
-	@ ldr	r1,[sp,#1*4]
-	mov	r0,r2,ror#7
-	add	r9,r9,r3			@ h+=Maj(a,b,c) from the past
-	mov	r3,r1,ror#17
-	eor	r0,r0,r2,ror#18
-	eor	r3,r3,r1,ror#19
-	eor	r0,r0,r2,lsr#3	@ sigma0(X[i+1])
-	ldr	r2,[sp,#3*4]
-	eor	r3,r3,r1,lsr#10	@ sigma1(X[i+14])
-	ldr	r1,[sp,#12*4]
-
-	add	r3,r3,r0
-	eor	r0,r5,r5,ror#5	@ from BODY_00_15
-	add	r2,r2,r3
-	eor	r0,r0,r5,ror#19	@ Sigma1(e)
-	add	r2,r2,r1			@ X[i]
-	ldr	r3,[r14],#4			@ *K256++
-	add	r8,r8,r2			@ h+=X[i]
-	str	r2,[sp,#3*4]
-	eor	r2,r6,r7
-	add	r8,r8,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r5
-	add	r8,r8,r3			@ h+=K256[i]
-	eor	r2,r2,r7			@ Ch(e,f,g)
-	eor	r0,r9,r9,ror#11
-	add	r8,r8,r2			@ h+=Ch(e,f,g)
-#if 19==31
-	and	r3,r3,#0xff
-	cmp	r3,#0xf2			@ done?
-#endif
-#if 19<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r9,r10			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#5*4]		@ from future BODY_16_xx
-	eor	r3,r9,r10			@ a^b, b^c in next round
-	ldr	r1,[sp,#2*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r9,ror#20	@ Sigma0(a)
-	and	r12,r12,r3			@ (b^c)&=(a^b)
-	add	r4,r4,r8			@ d+=h
-	eor	r12,r12,r10			@ Maj(a,b,c)
-	add	r8,r8,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r8,r8,r12			@ h+=Maj(a,b,c)
-	@ ldr	r2,[sp,#5*4]		@ 20
-	@ ldr	r1,[sp,#2*4]
-	mov	r0,r2,ror#7
-	add	r8,r8,r12			@ h+=Maj(a,b,c) from the past
-	mov	r12,r1,ror#17
-	eor	r0,r0,r2,ror#18
-	eor	r12,r12,r1,ror#19
-	eor	r0,r0,r2,lsr#3	@ sigma0(X[i+1])
-	ldr	r2,[sp,#4*4]
-	eor	r12,r12,r1,lsr#10	@ sigma1(X[i+14])
-	ldr	r1,[sp,#13*4]
-
-	add	r12,r12,r0
-	eor	r0,r4,r4,ror#5	@ from BODY_00_15
-	add	r2,r2,r12
-	eor	r0,r0,r4,ror#19	@ Sigma1(e)
-	add	r2,r2,r1			@ X[i]
-	ldr	r12,[r14],#4			@ *K256++
-	add	r7,r7,r2			@ h+=X[i]
-	str	r2,[sp,#4*4]
-	eor	r2,r5,r6
-	add	r7,r7,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r4
-	add	r7,r7,r12			@ h+=K256[i]
-	eor	r2,r2,r6			@ Ch(e,f,g)
-	eor	r0,r8,r8,ror#11
-	add	r7,r7,r2			@ h+=Ch(e,f,g)
-#if 20==31
-	and	r12,r12,#0xff
-	cmp	r12,#0xf2			@ done?
-#endif
-#if 20<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r12,r8,r9			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#6*4]		@ from future BODY_16_xx
-	eor	r12,r8,r9			@ a^b, b^c in next round
-	ldr	r1,[sp,#3*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r8,ror#20	@ Sigma0(a)
-	and	r3,r3,r12			@ (b^c)&=(a^b)
-	add	r11,r11,r7			@ d+=h
-	eor	r3,r3,r9			@ Maj(a,b,c)
-	add	r7,r7,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r7,r7,r3			@ h+=Maj(a,b,c)
-	@ ldr	r2,[sp,#6*4]		@ 21
-	@ ldr	r1,[sp,#3*4]
-	mov	r0,r2,ror#7
-	add	r7,r7,r3			@ h+=Maj(a,b,c) from the past
-	mov	r3,r1,ror#17
-	eor	r0,r0,r2,ror#18
-	eor	r3,r3,r1,ror#19
-	eor	r0,r0,r2,lsr#3	@ sigma0(X[i+1])
-	ldr	r2,[sp,#5*4]
-	eor	r3,r3,r1,lsr#10	@ sigma1(X[i+14])
-	ldr	r1,[sp,#14*4]
-
-	add	r3,r3,r0
-	eor	r0,r11,r11,ror#5	@ from BODY_00_15
-	add	r2,r2,r3
-	eor	r0,r0,r11,ror#19	@ Sigma1(e)
-	add	r2,r2,r1			@ X[i]
-	ldr	r3,[r14],#4			@ *K256++
-	add	r6,r6,r2			@ h+=X[i]
-	str	r2,[sp,#5*4]
-	eor	r2,r4,r5
-	add	r6,r6,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r11
-	add	r6,r6,r3			@ h+=K256[i]
-	eor	r2,r2,r5			@ Ch(e,f,g)
-	eor	r0,r7,r7,ror#11
-	add	r6,r6,r2			@ h+=Ch(e,f,g)
-#if 21==31
-	and	r3,r3,#0xff
-	cmp	r3,#0xf2			@ done?
-#endif
-#if 21<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r7,r8			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#7*4]		@ from future BODY_16_xx
-	eor	r3,r7,r8			@ a^b, b^c in next round
-	ldr	r1,[sp,#4*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r7,ror#20	@ Sigma0(a)
-	and	r12,r12,r3			@ (b^c)&=(a^b)
-	add	r10,r10,r6			@ d+=h
-	eor	r12,r12,r8			@ Maj(a,b,c)
-	add	r6,r6,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r6,r6,r12			@ h+=Maj(a,b,c)
-	@ ldr	r2,[sp,#7*4]		@ 22
-	@ ldr	r1,[sp,#4*4]
-	mov	r0,r2,ror#7
-	add	r6,r6,r12			@ h+=Maj(a,b,c) from the past
-	mov	r12,r1,ror#17
-	eor	r0,r0,r2,ror#18
-	eor	r12,r12,r1,ror#19
-	eor	r0,r0,r2,lsr#3	@ sigma0(X[i+1])
-	ldr	r2,[sp,#6*4]
-	eor	r12,r12,r1,lsr#10	@ sigma1(X[i+14])
-	ldr	r1,[sp,#15*4]
-
-	add	r12,r12,r0
-	eor	r0,r10,r10,ror#5	@ from BODY_00_15
-	add	r2,r2,r12
-	eor	r0,r0,r10,ror#19	@ Sigma1(e)
-	add	r2,r2,r1			@ X[i]
-	ldr	r12,[r14],#4			@ *K256++
-	add	r5,r5,r2			@ h+=X[i]
-	str	r2,[sp,#6*4]
-	eor	r2,r11,r4
-	add	r5,r5,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r10
-	add	r5,r5,r12			@ h+=K256[i]
-	eor	r2,r2,r4			@ Ch(e,f,g)
-	eor	r0,r6,r6,ror#11
-	add	r5,r5,r2			@ h+=Ch(e,f,g)
-#if 22==31
-	and	r12,r12,#0xff
-	cmp	r12,#0xf2			@ done?
-#endif
-#if 22<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r12,r6,r7			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#8*4]		@ from future BODY_16_xx
-	eor	r12,r6,r7			@ a^b, b^c in next round
-	ldr	r1,[sp,#5*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r6,ror#20	@ Sigma0(a)
-	and	r3,r3,r12			@ (b^c)&=(a^b)
-	add	r9,r9,r5			@ d+=h
-	eor	r3,r3,r7			@ Maj(a,b,c)
-	add	r5,r5,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r5,r5,r3			@ h+=Maj(a,b,c)
-	@ ldr	r2,[sp,#8*4]		@ 23
-	@ ldr	r1,[sp,#5*4]
-	mov	r0,r2,ror#7
-	add	r5,r5,r3			@ h+=Maj(a,b,c) from the past
-	mov	r3,r1,ror#17
-	eor	r0,r0,r2,ror#18
-	eor	r3,r3,r1,ror#19
-	eor	r0,r0,r2,lsr#3	@ sigma0(X[i+1])
-	ldr	r2,[sp,#7*4]
-	eor	r3,r3,r1,lsr#10	@ sigma1(X[i+14])
-	ldr	r1,[sp,#0*4]
-
-	add	r3,r3,r0
-	eor	r0,r9,r9,ror#5	@ from BODY_00_15
-	add	r2,r2,r3
-	eor	r0,r0,r9,ror#19	@ Sigma1(e)
-	add	r2,r2,r1			@ X[i]
-	ldr	r3,[r14],#4			@ *K256++
-	add	r4,r4,r2			@ h+=X[i]
-	str	r2,[sp,#7*4]
-	eor	r2,r10,r11
-	add	r4,r4,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r9
-	add	r4,r4,r3			@ h+=K256[i]
-	eor	r2,r2,r11			@ Ch(e,f,g)
-	eor	r0,r5,r5,ror#11
-	add	r4,r4,r2			@ h+=Ch(e,f,g)
-#if 23==31
-	and	r3,r3,#0xff
-	cmp	r3,#0xf2			@ done?
-#endif
-#if 23<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r5,r6			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#9*4]		@ from future BODY_16_xx
-	eor	r3,r5,r6			@ a^b, b^c in next round
-	ldr	r1,[sp,#6*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r5,ror#20	@ Sigma0(a)
-	and	r12,r12,r3			@ (b^c)&=(a^b)
-	add	r8,r8,r4			@ d+=h
-	eor	r12,r12,r6			@ Maj(a,b,c)
-	add	r4,r4,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r4,r4,r12			@ h+=Maj(a,b,c)
-	@ ldr	r2,[sp,#9*4]		@ 24
-	@ ldr	r1,[sp,#6*4]
-	mov	r0,r2,ror#7
-	add	r4,r4,r12			@ h+=Maj(a,b,c) from the past
-	mov	r12,r1,ror#17
-	eor	r0,r0,r2,ror#18
-	eor	r12,r12,r1,ror#19
-	eor	r0,r0,r2,lsr#3	@ sigma0(X[i+1])
-	ldr	r2,[sp,#8*4]
-	eor	r12,r12,r1,lsr#10	@ sigma1(X[i+14])
-	ldr	r1,[sp,#1*4]
-
-	add	r12,r12,r0
-	eor	r0,r8,r8,ror#5	@ from BODY_00_15
-	add	r2,r2,r12
-	eor	r0,r0,r8,ror#19	@ Sigma1(e)
-	add	r2,r2,r1			@ X[i]
-	ldr	r12,[r14],#4			@ *K256++
-	add	r11,r11,r2			@ h+=X[i]
-	str	r2,[sp,#8*4]
-	eor	r2,r9,r10
-	add	r11,r11,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r8
-	add	r11,r11,r12			@ h+=K256[i]
-	eor	r2,r2,r10			@ Ch(e,f,g)
-	eor	r0,r4,r4,ror#11
-	add	r11,r11,r2			@ h+=Ch(e,f,g)
-#if 24==31
-	and	r12,r12,#0xff
-	cmp	r12,#0xf2			@ done?
-#endif
-#if 24<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r12,r4,r5			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#10*4]		@ from future BODY_16_xx
-	eor	r12,r4,r5			@ a^b, b^c in next round
-	ldr	r1,[sp,#7*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r4,ror#20	@ Sigma0(a)
-	and	r3,r3,r12			@ (b^c)&=(a^b)
-	add	r7,r7,r11			@ d+=h
-	eor	r3,r3,r5			@ Maj(a,b,c)
-	add	r11,r11,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r11,r11,r3			@ h+=Maj(a,b,c)
-	@ ldr	r2,[sp,#10*4]		@ 25
-	@ ldr	r1,[sp,#7*4]
-	mov	r0,r2,ror#7
-	add	r11,r11,r3			@ h+=Maj(a,b,c) from the past
-	mov	r3,r1,ror#17
-	eor	r0,r0,r2,ror#18
-	eor	r3,r3,r1,ror#19
-	eor	r0,r0,r2,lsr#3	@ sigma0(X[i+1])
-	ldr	r2,[sp,#9*4]
-	eor	r3,r3,r1,lsr#10	@ sigma1(X[i+14])
-	ldr	r1,[sp,#2*4]
-
-	add	r3,r3,r0
-	eor	r0,r7,r7,ror#5	@ from BODY_00_15
-	add	r2,r2,r3
-	eor	r0,r0,r7,ror#19	@ Sigma1(e)
-	add	r2,r2,r1			@ X[i]
-	ldr	r3,[r14],#4			@ *K256++
-	add	r10,r10,r2			@ h+=X[i]
-	str	r2,[sp,#9*4]
-	eor	r2,r8,r9
-	add	r10,r10,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r7
-	add	r10,r10,r3			@ h+=K256[i]
-	eor	r2,r2,r9			@ Ch(e,f,g)
-	eor	r0,r11,r11,ror#11
-	add	r10,r10,r2			@ h+=Ch(e,f,g)
-#if 25==31
-	and	r3,r3,#0xff
-	cmp	r3,#0xf2			@ done?
-#endif
-#if 25<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r11,r4			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#11*4]		@ from future BODY_16_xx
-	eor	r3,r11,r4			@ a^b, b^c in next round
-	ldr	r1,[sp,#8*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r11,ror#20	@ Sigma0(a)
-	and	r12,r12,r3			@ (b^c)&=(a^b)
-	add	r6,r6,r10			@ d+=h
-	eor	r12,r12,r4			@ Maj(a,b,c)
-	add	r10,r10,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r10,r10,r12			@ h+=Maj(a,b,c)
-	@ ldr	r2,[sp,#11*4]		@ 26
-	@ ldr	r1,[sp,#8*4]
-	mov	r0,r2,ror#7
-	add	r10,r10,r12			@ h+=Maj(a,b,c) from the past
-	mov	r12,r1,ror#17
-	eor	r0,r0,r2,ror#18
-	eor	r12,r12,r1,ror#19
-	eor	r0,r0,r2,lsr#3	@ sigma0(X[i+1])
-	ldr	r2,[sp,#10*4]
-	eor	r12,r12,r1,lsr#10	@ sigma1(X[i+14])
-	ldr	r1,[sp,#3*4]
-
-	add	r12,r12,r0
-	eor	r0,r6,r6,ror#5	@ from BODY_00_15
-	add	r2,r2,r12
-	eor	r0,r0,r6,ror#19	@ Sigma1(e)
-	add	r2,r2,r1			@ X[i]
-	ldr	r12,[r14],#4			@ *K256++
-	add	r9,r9,r2			@ h+=X[i]
-	str	r2,[sp,#10*4]
-	eor	r2,r7,r8
-	add	r9,r9,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r6
-	add	r9,r9,r12			@ h+=K256[i]
-	eor	r2,r2,r8			@ Ch(e,f,g)
-	eor	r0,r10,r10,ror#11
-	add	r9,r9,r2			@ h+=Ch(e,f,g)
-#if 26==31
-	and	r12,r12,#0xff
-	cmp	r12,#0xf2			@ done?
-#endif
-#if 26<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r12,r10,r11			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#12*4]		@ from future BODY_16_xx
-	eor	r12,r10,r11			@ a^b, b^c in next round
-	ldr	r1,[sp,#9*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r10,ror#20	@ Sigma0(a)
-	and	r3,r3,r12			@ (b^c)&=(a^b)
-	add	r5,r5,r9			@ d+=h
-	eor	r3,r3,r11			@ Maj(a,b,c)
-	add	r9,r9,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r9,r9,r3			@ h+=Maj(a,b,c)
-	@ ldr	r2,[sp,#12*4]		@ 27
-	@ ldr	r1,[sp,#9*4]
-	mov	r0,r2,ror#7
-	add	r9,r9,r3			@ h+=Maj(a,b,c) from the past
-	mov	r3,r1,ror#17
-	eor	r0,r0,r2,ror#18
-	eor	r3,r3,r1,ror#19
-	eor	r0,r0,r2,lsr#3	@ sigma0(X[i+1])
-	ldr	r2,[sp,#11*4]
-	eor	r3,r3,r1,lsr#10	@ sigma1(X[i+14])
-	ldr	r1,[sp,#4*4]
-
-	add	r3,r3,r0
-	eor	r0,r5,r5,ror#5	@ from BODY_00_15
-	add	r2,r2,r3
-	eor	r0,r0,r5,ror#19	@ Sigma1(e)
-	add	r2,r2,r1			@ X[i]
-	ldr	r3,[r14],#4			@ *K256++
-	add	r8,r8,r2			@ h+=X[i]
-	str	r2,[sp,#11*4]
-	eor	r2,r6,r7
-	add	r8,r8,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r5
-	add	r8,r8,r3			@ h+=K256[i]
-	eor	r2,r2,r7			@ Ch(e,f,g)
-	eor	r0,r9,r9,ror#11
-	add	r8,r8,r2			@ h+=Ch(e,f,g)
-#if 27==31
-	and	r3,r3,#0xff
-	cmp	r3,#0xf2			@ done?
-#endif
-#if 27<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r9,r10			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#13*4]		@ from future BODY_16_xx
-	eor	r3,r9,r10			@ a^b, b^c in next round
-	ldr	r1,[sp,#10*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r9,ror#20	@ Sigma0(a)
-	and	r12,r12,r3			@ (b^c)&=(a^b)
-	add	r4,r4,r8			@ d+=h
-	eor	r12,r12,r10			@ Maj(a,b,c)
-	add	r8,r8,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r8,r8,r12			@ h+=Maj(a,b,c)
-	@ ldr	r2,[sp,#13*4]		@ 28
-	@ ldr	r1,[sp,#10*4]
-	mov	r0,r2,ror#7
-	add	r8,r8,r12			@ h+=Maj(a,b,c) from the past
-	mov	r12,r1,ror#17
-	eor	r0,r0,r2,ror#18
-	eor	r12,r12,r1,ror#19
-	eor	r0,r0,r2,lsr#3	@ sigma0(X[i+1])
-	ldr	r2,[sp,#12*4]
-	eor	r12,r12,r1,lsr#10	@ sigma1(X[i+14])
-	ldr	r1,[sp,#5*4]
-
-	add	r12,r12,r0
-	eor	r0,r4,r4,ror#5	@ from BODY_00_15
-	add	r2,r2,r12
-	eor	r0,r0,r4,ror#19	@ Sigma1(e)
-	add	r2,r2,r1			@ X[i]
-	ldr	r12,[r14],#4			@ *K256++
-	add	r7,r7,r2			@ h+=X[i]
-	str	r2,[sp,#12*4]
-	eor	r2,r5,r6
-	add	r7,r7,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r4
-	add	r7,r7,r12			@ h+=K256[i]
-	eor	r2,r2,r6			@ Ch(e,f,g)
-	eor	r0,r8,r8,ror#11
-	add	r7,r7,r2			@ h+=Ch(e,f,g)
-#if 28==31
-	and	r12,r12,#0xff
-	cmp	r12,#0xf2			@ done?
-#endif
-#if 28<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r12,r8,r9			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#14*4]		@ from future BODY_16_xx
-	eor	r12,r8,r9			@ a^b, b^c in next round
-	ldr	r1,[sp,#11*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r8,ror#20	@ Sigma0(a)
-	and	r3,r3,r12			@ (b^c)&=(a^b)
-	add	r11,r11,r7			@ d+=h
-	eor	r3,r3,r9			@ Maj(a,b,c)
-	add	r7,r7,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r7,r7,r3			@ h+=Maj(a,b,c)
-	@ ldr	r2,[sp,#14*4]		@ 29
-	@ ldr	r1,[sp,#11*4]
-	mov	r0,r2,ror#7
-	add	r7,r7,r3			@ h+=Maj(a,b,c) from the past
-	mov	r3,r1,ror#17
-	eor	r0,r0,r2,ror#18
-	eor	r3,r3,r1,ror#19
-	eor	r0,r0,r2,lsr#3	@ sigma0(X[i+1])
-	ldr	r2,[sp,#13*4]
-	eor	r3,r3,r1,lsr#10	@ sigma1(X[i+14])
-	ldr	r1,[sp,#6*4]
-
-	add	r3,r3,r0
-	eor	r0,r11,r11,ror#5	@ from BODY_00_15
-	add	r2,r2,r3
-	eor	r0,r0,r11,ror#19	@ Sigma1(e)
-	add	r2,r2,r1			@ X[i]
-	ldr	r3,[r14],#4			@ *K256++
-	add	r6,r6,r2			@ h+=X[i]
-	str	r2,[sp,#13*4]
-	eor	r2,r4,r5
-	add	r6,r6,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r11
-	add	r6,r6,r3			@ h+=K256[i]
-	eor	r2,r2,r5			@ Ch(e,f,g)
-	eor	r0,r7,r7,ror#11
-	add	r6,r6,r2			@ h+=Ch(e,f,g)
-#if 29==31
-	and	r3,r3,#0xff
-	cmp	r3,#0xf2			@ done?
-#endif
-#if 29<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r7,r8			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#15*4]		@ from future BODY_16_xx
-	eor	r3,r7,r8			@ a^b, b^c in next round
-	ldr	r1,[sp,#12*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r7,ror#20	@ Sigma0(a)
-	and	r12,r12,r3			@ (b^c)&=(a^b)
-	add	r10,r10,r6			@ d+=h
-	eor	r12,r12,r8			@ Maj(a,b,c)
-	add	r6,r6,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r6,r6,r12			@ h+=Maj(a,b,c)
-	@ ldr	r2,[sp,#15*4]		@ 30
-	@ ldr	r1,[sp,#12*4]
-	mov	r0,r2,ror#7
-	add	r6,r6,r12			@ h+=Maj(a,b,c) from the past
-	mov	r12,r1,ror#17
-	eor	r0,r0,r2,ror#18
-	eor	r12,r12,r1,ror#19
-	eor	r0,r0,r2,lsr#3	@ sigma0(X[i+1])
-	ldr	r2,[sp,#14*4]
-	eor	r12,r12,r1,lsr#10	@ sigma1(X[i+14])
-	ldr	r1,[sp,#7*4]
-
-	add	r12,r12,r0
-	eor	r0,r10,r10,ror#5	@ from BODY_00_15
-	add	r2,r2,r12
-	eor	r0,r0,r10,ror#19	@ Sigma1(e)
-	add	r2,r2,r1			@ X[i]
-	ldr	r12,[r14],#4			@ *K256++
-	add	r5,r5,r2			@ h+=X[i]
-	str	r2,[sp,#14*4]
-	eor	r2,r11,r4
-	add	r5,r5,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r10
-	add	r5,r5,r12			@ h+=K256[i]
-	eor	r2,r2,r4			@ Ch(e,f,g)
-	eor	r0,r6,r6,ror#11
-	add	r5,r5,r2			@ h+=Ch(e,f,g)
-#if 30==31
-	and	r12,r12,#0xff
-	cmp	r12,#0xf2			@ done?
-#endif
-#if 30<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r12,r6,r7			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#0*4]		@ from future BODY_16_xx
-	eor	r12,r6,r7			@ a^b, b^c in next round
-	ldr	r1,[sp,#13*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r6,ror#20	@ Sigma0(a)
-	and	r3,r3,r12			@ (b^c)&=(a^b)
-	add	r9,r9,r5			@ d+=h
-	eor	r3,r3,r7			@ Maj(a,b,c)
-	add	r5,r5,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r5,r5,r3			@ h+=Maj(a,b,c)
-	@ ldr	r2,[sp,#0*4]		@ 31
-	@ ldr	r1,[sp,#13*4]
-	mov	r0,r2,ror#7
-	add	r5,r5,r3			@ h+=Maj(a,b,c) from the past
-	mov	r3,r1,ror#17
-	eor	r0,r0,r2,ror#18
-	eor	r3,r3,r1,ror#19
-	eor	r0,r0,r2,lsr#3	@ sigma0(X[i+1])
-	ldr	r2,[sp,#15*4]
-	eor	r3,r3,r1,lsr#10	@ sigma1(X[i+14])
-	ldr	r1,[sp,#8*4]
-
-	add	r3,r3,r0
-	eor	r0,r9,r9,ror#5	@ from BODY_00_15
-	add	r2,r2,r3
-	eor	r0,r0,r9,ror#19	@ Sigma1(e)
-	add	r2,r2,r1			@ X[i]
-	ldr	r3,[r14],#4			@ *K256++
-	add	r4,r4,r2			@ h+=X[i]
-	str	r2,[sp,#15*4]
-	eor	r2,r10,r11
-	add	r4,r4,r0,ror#6	@ h+=Sigma1(e)
-	and	r2,r2,r9
-	add	r4,r4,r3			@ h+=K256[i]
-	eor	r2,r2,r11			@ Ch(e,f,g)
-	eor	r0,r5,r5,ror#11
-	add	r4,r4,r2			@ h+=Ch(e,f,g)
-#if 31==31
-	and	r3,r3,#0xff
-	cmp	r3,#0xf2			@ done?
-#endif
-#if 31<15
-# if __ARM_ARCH__>=7
-	ldr	r2,[r1],#4			@ prefetch
-# else
-	ldrb	r2,[r1,#3]
-# endif
-	eor	r3,r5,r6			@ a^b, b^c in next round
-#else
-	ldr	r2,[sp,#1*4]		@ from future BODY_16_xx
-	eor	r3,r5,r6			@ a^b, b^c in next round
-	ldr	r1,[sp,#14*4]	@ from future BODY_16_xx
-#endif
-	eor	r0,r0,r5,ror#20	@ Sigma0(a)
-	and	r12,r12,r3			@ (b^c)&=(a^b)
-	add	r8,r8,r4			@ d+=h
-	eor	r12,r12,r6			@ Maj(a,b,c)
-	add	r4,r4,r0,ror#2	@ h+=Sigma0(a)
-	@ add	r4,r4,r12			@ h+=Maj(a,b,c)
-#if __ARM_ARCH__>=7
-	ite	eq			@ Thumb2 thing, sanity check in ARM
-#endif
-	ldreq	r3,[sp,#16*4]		@ pull ctx
-	bne	.Lrounds_16_xx
-
-	add	r4,r4,r12		@ h+=Maj(a,b,c) from the past
-	ldr	r0,[r3,#0]
-	ldr	r2,[r3,#4]
-	ldr	r12,[r3,#8]
-	add	r4,r4,r0
-	ldr	r0,[r3,#12]
-	add	r5,r5,r2
-	ldr	r2,[r3,#16]
-	add	r6,r6,r12
-	ldr	r12,[r3,#20]
-	add	r7,r7,r0
-	ldr	r0,[r3,#24]
-	add	r8,r8,r2
-	ldr	r2,[r3,#28]
-	add	r9,r9,r12
-	ldr	r1,[sp,#17*4]		@ pull inp
-	ldr	r12,[sp,#18*4]		@ pull inp+len
-	add	r10,r10,r0
-	add	r11,r11,r2
-	stmia	r3,{r4,r5,r6,r7,r8,r9,r10,r11}
-	cmp	r1,r12
-	sub	r14,r14,#256	@ rewind Ktbl
-	bne	.Loop
-
-	add	sp,sp,#19*4	@ destroy frame
-#if __ARM_ARCH__>=5
-	ldmia	sp!,{r4-r11,pc}
-#else
-	ldmia	sp!,{r4-r11,lr}
-	tst	lr,#1
-	moveq	pc,lr			@ be binary compatible with V4, yet
-	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
-#endif
-.size	sha256_block_data_order,.-sha256_block_data_order
-#if __ARM_MAX_ARCH__>=7
-.arch	armv7-a
-.fpu	neon
-
-.global	sha256_block_data_order_neon
-.type	sha256_block_data_order_neon,%function
-.align	4
-sha256_block_data_order_neon:
-.LNEON:
-	stmdb	sp!,{r4-r12,lr}
-
-	sub	r11,sp,#16*4+16
-	adr	r14,.Lsha256_block_data_order
-	sub	r14,r14,#.Lsha256_block_data_order-K256
-	bic	r11,r11,#15		@ align for 128-bit stores
-	mov	r12,sp
-	mov	sp,r11			@ alloca
-	add	r2,r1,r2,lsl#6	@ len to point at the end of inp
-
-	vld1.8		{q0},[r1]!
-	vld1.8		{q1},[r1]!
-	vld1.8		{q2},[r1]!
-	vld1.8		{q3},[r1]!
-	vld1.32		{q8},[r14,:128]!
-	vld1.32		{q9},[r14,:128]!
-	vld1.32		{q10},[r14,:128]!
-	vld1.32		{q11},[r14,:128]!
-	vrev32.8	q0,q0		@ yes, even on
-	str		r0,[sp,#64]
-	vrev32.8	q1,q1		@ big-endian
-	str		r1,[sp,#68]
-	mov		r1,sp
-	vrev32.8	q2,q2
-	str		r2,[sp,#72]
-	vrev32.8	q3,q3
-	str		r12,[sp,#76]		@ save original sp
-	vadd.i32	q8,q8,q0
-	vadd.i32	q9,q9,q1
-	vst1.32		{q8},[r1,:128]!
-	vadd.i32	q10,q10,q2
-	vst1.32		{q9},[r1,:128]!
-	vadd.i32	q11,q11,q3
-	vst1.32		{q10},[r1,:128]!
-	vst1.32		{q11},[r1,:128]!
-
-	ldmia		r0,{r4-r11}
-	sub		r1,r1,#64
-	ldr		r2,[sp,#0]
-	eor		r12,r12,r12
-	eor		r3,r5,r6
-	b		.L_00_48
-
-.align	4
-.L_00_48:
-	vext.8	q8,q0,q1,#4
-	add	r11,r11,r2
-	eor	r2,r9,r10
-	eor	r0,r8,r8,ror#5
-	vext.8	q9,q2,q3,#4
-	add	r4,r4,r12
-	and	r2,r2,r8
-	eor	r12,r0,r8,ror#19
-	vshr.u32	q10,q8,#7
-	eor	r0,r4,r4,ror#11
-	eor	r2,r2,r10
-	vadd.i32	q0,q0,q9
-	add	r11,r11,r12,ror#6
-	eor	r12,r4,r5
-	vshr.u32	q9,q8,#3
-	eor	r0,r0,r4,ror#20
-	add	r11,r11,r2
-	vsli.32	q10,q8,#25
-	ldr	r2,[sp,#4]
-	and	r3,r3,r12
-	vshr.u32	q11,q8,#18
-	add	r7,r7,r11
-	add	r11,r11,r0,ror#2
-	eor	r3,r3,r5
-	veor	q9,q9,q10
-	add	r10,r10,r2
-	vsli.32	q11,q8,#14
-	eor	r2,r8,r9
-	eor	r0,r7,r7,ror#5
-	vshr.u32	d24,d7,#17
-	add	r11,r11,r3
-	and	r2,r2,r7
-	veor	q9,q9,q11
-	eor	r3,r0,r7,ror#19
-	eor	r0,r11,r11,ror#11
-	vsli.32	d24,d7,#15
-	eor	r2,r2,r9
-	add	r10,r10,r3,ror#6
-	vshr.u32	d25,d7,#10
-	eor	r3,r11,r4
-	eor	r0,r0,r11,ror#20
-	vadd.i32	q0,q0,q9
-	add	r10,r10,r2
-	ldr	r2,[sp,#8]
-	veor	d25,d25,d24
-	and	r12,r12,r3
-	add	r6,r6,r10
-	vshr.u32	d24,d7,#19
-	add	r10,r10,r0,ror#2
-	eor	r12,r12,r4
-	vsli.32	d24,d7,#13
-	add	r9,r9,r2
-	eor	r2,r7,r8
-	veor	d25,d25,d24
-	eor	r0,r6,r6,ror#5
-	add	r10,r10,r12
-	vadd.i32	d0,d0,d25
-	and	r2,r2,r6
-	eor	r12,r0,r6,ror#19
-	vshr.u32	d24,d0,#17
-	eor	r0,r10,r10,ror#11
-	eor	r2,r2,r8
-	vsli.32	d24,d0,#15
-	add	r9,r9,r12,ror#6
-	eor	r12,r10,r11
-	vshr.u32	d25,d0,#10
-	eor	r0,r0,r10,ror#20
-	add	r9,r9,r2
-	veor	d25,d25,d24
-	ldr	r2,[sp,#12]
-	and	r3,r3,r12
-	vshr.u32	d24,d0,#19
-	add	r5,r5,r9
-	add	r9,r9,r0,ror#2
-	eor	r3,r3,r11
-	vld1.32	{q8},[r14,:128]!
-	add	r8,r8,r2
-	vsli.32	d24,d0,#13
-	eor	r2,r6,r7
-	eor	r0,r5,r5,ror#5
-	veor	d25,d25,d24
-	add	r9,r9,r3
-	and	r2,r2,r5
-	vadd.i32	d1,d1,d25
-	eor	r3,r0,r5,ror#19
-	eor	r0,r9,r9,ror#11
-	vadd.i32	q8,q8,q0
-	eor	r2,r2,r7
-	add	r8,r8,r3,ror#6
-	eor	r3,r9,r10
-	eor	r0,r0,r9,ror#20
-	add	r8,r8,r2
-	ldr	r2,[sp,#16]
-	and	r12,r12,r3
-	add	r4,r4,r8
-	vst1.32	{q8},[r1,:128]!
-	add	r8,r8,r0,ror#2
-	eor	r12,r12,r10
-	vext.8	q8,q1,q2,#4
-	add	r7,r7,r2
-	eor	r2,r5,r6
-	eor	r0,r4,r4,ror#5
-	vext.8	q9,q3,q0,#4
-	add	r8,r8,r12
-	and	r2,r2,r4
-	eor	r12,r0,r4,ror#19
-	vshr.u32	q10,q8,#7
-	eor	r0,r8,r8,ror#11
-	eor	r2,r2,r6
-	vadd.i32	q1,q1,q9
-	add	r7,r7,r12,ror#6
-	eor	r12,r8,r9
-	vshr.u32	q9,q8,#3
-	eor	r0,r0,r8,ror#20
-	add	r7,r7,r2
-	vsli.32	q10,q8,#25
-	ldr	r2,[sp,#20]
-	and	r3,r3,r12
-	vshr.u32	q11,q8,#18
-	add	r11,r11,r7
-	add	r7,r7,r0,ror#2
-	eor	r3,r3,r9
-	veor	q9,q9,q10
-	add	r6,r6,r2
-	vsli.32	q11,q8,#14
-	eor	r2,r4,r5
-	eor	r0,r11,r11,ror#5
-	vshr.u32	d24,d1,#17
-	add	r7,r7,r3
-	and	r2,r2,r11
-	veor	q9,q9,q11
-	eor	r3,r0,r11,ror#19
-	eor	r0,r7,r7,ror#11
-	vsli.32	d24,d1,#15
-	eor	r2,r2,r5
-	add	r6,r6,r3,ror#6
-	vshr.u32	d25,d1,#10
-	eor	r3,r7,r8
-	eor	r0,r0,r7,ror#20
-	vadd.i32	q1,q1,q9
-	add	r6,r6,r2
-	ldr	r2,[sp,#24]
-	veor	d25,d25,d24
-	and	r12,r12,r3
-	add	r10,r10,r6
-	vshr.u32	d24,d1,#19
-	add	r6,r6,r0,ror#2
-	eor	r12,r12,r8
-	vsli.32	d24,d1,#13
-	add	r5,r5,r2
-	eor	r2,r11,r4
-	veor	d25,d25,d24
-	eor	r0,r10,r10,ror#5
-	add	r6,r6,r12
-	vadd.i32	d2,d2,d25
-	and	r2,r2,r10
-	eor	r12,r0,r10,ror#19
-	vshr.u32	d24,d2,#17
-	eor	r0,r6,r6,ror#11
-	eor	r2,r2,r4
-	vsli.32	d24,d2,#15
-	add	r5,r5,r12,ror#6
-	eor	r12,r6,r7
-	vshr.u32	d25,d2,#10
-	eor	r0,r0,r6,ror#20
-	add	r5,r5,r2
-	veor	d25,d25,d24
-	ldr	r2,[sp,#28]
-	and	r3,r3,r12
-	vshr.u32	d24,d2,#19
-	add	r9,r9,r5
-	add	r5,r5,r0,ror#2
-	eor	r3,r3,r7
-	vld1.32	{q8},[r14,:128]!
-	add	r4,r4,r2
-	vsli.32	d24,d2,#13
-	eor	r2,r10,r11
-	eor	r0,r9,r9,ror#5
-	veor	d25,d25,d24
-	add	r5,r5,r3
-	and	r2,r2,r9
-	vadd.i32	d3,d3,d25
-	eor	r3,r0,r9,ror#19
-	eor	r0,r5,r5,ror#11
-	vadd.i32	q8,q8,q1
-	eor	r2,r2,r11
-	add	r4,r4,r3,ror#6
-	eor	r3,r5,r6
-	eor	r0,r0,r5,ror#20
-	add	r4,r4,r2
-	ldr	r2,[sp,#32]
-	and	r12,r12,r3
-	add	r8,r8,r4
-	vst1.32	{q8},[r1,:128]!
-	add	r4,r4,r0,ror#2
-	eor	r12,r12,r6
-	vext.8	q8,q2,q3,#4
-	add	r11,r11,r2
-	eor	r2,r9,r10
-	eor	r0,r8,r8,ror#5
-	vext.8	q9,q0,q1,#4
-	add	r4,r4,r12
-	and	r2,r2,r8
-	eor	r12,r0,r8,ror#19
-	vshr.u32	q10,q8,#7
-	eor	r0,r4,r4,ror#11
-	eor	r2,r2,r10
-	vadd.i32	q2,q2,q9
-	add	r11,r11,r12,ror#6
-	eor	r12,r4,r5
-	vshr.u32	q9,q8,#3
-	eor	r0,r0,r4,ror#20
-	add	r11,r11,r2
-	vsli.32	q10,q8,#25
-	ldr	r2,[sp,#36]
-	and	r3,r3,r12
-	vshr.u32	q11,q8,#18
-	add	r7,r7,r11
-	add	r11,r11,r0,ror#2
-	eor	r3,r3,r5
-	veor	q9,q9,q10
-	add	r10,r10,r2
-	vsli.32	q11,q8,#14
-	eor	r2,r8,r9
-	eor	r0,r7,r7,ror#5
-	vshr.u32	d24,d3,#17
-	add	r11,r11,r3
-	and	r2,r2,r7
-	veor	q9,q9,q11
-	eor	r3,r0,r7,ror#19
-	eor	r0,r11,r11,ror#11
-	vsli.32	d24,d3,#15
-	eor	r2,r2,r9
-	add	r10,r10,r3,ror#6
-	vshr.u32	d25,d3,#10
-	eor	r3,r11,r4
-	eor	r0,r0,r11,ror#20
-	vadd.i32	q2,q2,q9
-	add	r10,r10,r2
-	ldr	r2,[sp,#40]
-	veor	d25,d25,d24
-	and	r12,r12,r3
-	add	r6,r6,r10
-	vshr.u32	d24,d3,#19
-	add	r10,r10,r0,ror#2
-	eor	r12,r12,r4
-	vsli.32	d24,d3,#13
-	add	r9,r9,r2
-	eor	r2,r7,r8
-	veor	d25,d25,d24
-	eor	r0,r6,r6,ror#5
-	add	r10,r10,r12
-	vadd.i32	d4,d4,d25
-	and	r2,r2,r6
-	eor	r12,r0,r6,ror#19
-	vshr.u32	d24,d4,#17
-	eor	r0,r10,r10,ror#11
-	eor	r2,r2,r8
-	vsli.32	d24,d4,#15
-	add	r9,r9,r12,ror#6
-	eor	r12,r10,r11
-	vshr.u32	d25,d4,#10
-	eor	r0,r0,r10,ror#20
-	add	r9,r9,r2
-	veor	d25,d25,d24
-	ldr	r2,[sp,#44]
-	and	r3,r3,r12
-	vshr.u32	d24,d4,#19
-	add	r5,r5,r9
-	add	r9,r9,r0,ror#2
-	eor	r3,r3,r11
-	vld1.32	{q8},[r14,:128]!
-	add	r8,r8,r2
-	vsli.32	d24,d4,#13
-	eor	r2,r6,r7
-	eor	r0,r5,r5,ror#5
-	veor	d25,d25,d24
-	add	r9,r9,r3
-	and	r2,r2,r5
-	vadd.i32	d5,d5,d25
-	eor	r3,r0,r5,ror#19
-	eor	r0,r9,r9,ror#11
-	vadd.i32	q8,q8,q2
-	eor	r2,r2,r7
-	add	r8,r8,r3,ror#6
-	eor	r3,r9,r10
-	eor	r0,r0,r9,ror#20
-	add	r8,r8,r2
-	ldr	r2,[sp,#48]
-	and	r12,r12,r3
-	add	r4,r4,r8
-	vst1.32	{q8},[r1,:128]!
-	add	r8,r8,r0,ror#2
-	eor	r12,r12,r10
-	vext.8	q8,q3,q0,#4
-	add	r7,r7,r2
-	eor	r2,r5,r6
-	eor	r0,r4,r4,ror#5
-	vext.8	q9,q1,q2,#4
-	add	r8,r8,r12
-	and	r2,r2,r4
-	eor	r12,r0,r4,ror#19
-	vshr.u32	q10,q8,#7
-	eor	r0,r8,r8,ror#11
-	eor	r2,r2,r6
-	vadd.i32	q3,q3,q9
-	add	r7,r7,r12,ror#6
-	eor	r12,r8,r9
-	vshr.u32	q9,q8,#3
-	eor	r0,r0,r8,ror#20
-	add	r7,r7,r2
-	vsli.32	q10,q8,#25
-	ldr	r2,[sp,#52]
-	and	r3,r3,r12
-	vshr.u32	q11,q8,#18
-	add	r11,r11,r7
-	add	r7,r7,r0,ror#2
-	eor	r3,r3,r9
-	veor	q9,q9,q10
-	add	r6,r6,r2
-	vsli.32	q11,q8,#14
-	eor	r2,r4,r5
-	eor	r0,r11,r11,ror#5
-	vshr.u32	d24,d5,#17
-	add	r7,r7,r3
-	and	r2,r2,r11
-	veor	q9,q9,q11
-	eor	r3,r0,r11,ror#19
-	eor	r0,r7,r7,ror#11
-	vsli.32	d24,d5,#15
-	eor	r2,r2,r5
-	add	r6,r6,r3,ror#6
-	vshr.u32	d25,d5,#10
-	eor	r3,r7,r8
-	eor	r0,r0,r7,ror#20
-	vadd.i32	q3,q3,q9
-	add	r6,r6,r2
-	ldr	r2,[sp,#56]
-	veor	d25,d25,d24
-	and	r12,r12,r3
-	add	r10,r10,r6
-	vshr.u32	d24,d5,#19
-	add	r6,r6,r0,ror#2
-	eor	r12,r12,r8
-	vsli.32	d24,d5,#13
-	add	r5,r5,r2
-	eor	r2,r11,r4
-	veor	d25,d25,d24
-	eor	r0,r10,r10,ror#5
-	add	r6,r6,r12
-	vadd.i32	d6,d6,d25
-	and	r2,r2,r10
-	eor	r12,r0,r10,ror#19
-	vshr.u32	d24,d6,#17
-	eor	r0,r6,r6,ror#11
-	eor	r2,r2,r4
-	vsli.32	d24,d6,#15
-	add	r5,r5,r12,ror#6
-	eor	r12,r6,r7
-	vshr.u32	d25,d6,#10
-	eor	r0,r0,r6,ror#20
-	add	r5,r5,r2
-	veor	d25,d25,d24
-	ldr	r2,[sp,#60]
-	and	r3,r3,r12
-	vshr.u32	d24,d6,#19
-	add	r9,r9,r5
-	add	r5,r5,r0,ror#2
-	eor	r3,r3,r7
-	vld1.32	{q8},[r14,:128]!
-	add	r4,r4,r2
-	vsli.32	d24,d6,#13
-	eor	r2,r10,r11
-	eor	r0,r9,r9,ror#5
-	veor	d25,d25,d24
-	add	r5,r5,r3
-	and	r2,r2,r9
-	vadd.i32	d7,d7,d25
-	eor	r3,r0,r9,ror#19
-	eor	r0,r5,r5,ror#11
-	vadd.i32	q8,q8,q3
-	eor	r2,r2,r11
-	add	r4,r4,r3,ror#6
-	eor	r3,r5,r6
-	eor	r0,r0,r5,ror#20
-	add	r4,r4,r2
-	ldr	r2,[r14]
-	and	r12,r12,r3
-	add	r8,r8,r4
-	vst1.32	{q8},[r1,:128]!
-	add	r4,r4,r0,ror#2
-	eor	r12,r12,r6
-	teq	r2,#0				@ check for K256 terminator
-	ldr	r2,[sp,#0]
-	sub	r1,r1,#64
-	bne	.L_00_48
-
-	ldr		r1,[sp,#68]
-	ldr		r0,[sp,#72]
-	sub		r14,r14,#256	@ rewind r14
-	teq		r1,r0
-	it		eq
-	subeq		r1,r1,#64		@ avoid SEGV
-	vld1.8		{q0},[r1]!		@ load next input block
-	vld1.8		{q1},[r1]!
-	vld1.8		{q2},[r1]!
-	vld1.8		{q3},[r1]!
-	it		ne
-	strne		r1,[sp,#68]
-	mov		r1,sp
-	add	r11,r11,r2
-	eor	r2,r9,r10
-	eor	r0,r8,r8,ror#5
-	add	r4,r4,r12
-	vld1.32	{q8},[r14,:128]!
-	and	r2,r2,r8
-	eor	r12,r0,r8,ror#19
-	eor	r0,r4,r4,ror#11
-	eor	r2,r2,r10
-	vrev32.8	q0,q0
-	add	r11,r11,r12,ror#6
-	eor	r12,r4,r5
-	eor	r0,r0,r4,ror#20
-	add	r11,r11,r2
-	vadd.i32	q8,q8,q0
-	ldr	r2,[sp,#4]
-	and	r3,r3,r12
-	add	r7,r7,r11
-	add	r11,r11,r0,ror#2
-	eor	r3,r3,r5
-	add	r10,r10,r2
-	eor	r2,r8,r9
-	eor	r0,r7,r7,ror#5
-	add	r11,r11,r3
-	and	r2,r2,r7
-	eor	r3,r0,r7,ror#19
-	eor	r0,r11,r11,ror#11
-	eor	r2,r2,r9
-	add	r10,r10,r3,ror#6
-	eor	r3,r11,r4
-	eor	r0,r0,r11,ror#20
-	add	r10,r10,r2
-	ldr	r2,[sp,#8]
-	and	r12,r12,r3
-	add	r6,r6,r10
-	add	r10,r10,r0,ror#2
-	eor	r12,r12,r4
-	add	r9,r9,r2
-	eor	r2,r7,r8
-	eor	r0,r6,r6,ror#5
-	add	r10,r10,r12
-	and	r2,r2,r6
-	eor	r12,r0,r6,ror#19
-	eor	r0,r10,r10,ror#11
-	eor	r2,r2,r8
-	add	r9,r9,r12,ror#6
-	eor	r12,r10,r11
-	eor	r0,r0,r10,ror#20
-	add	r9,r9,r2
-	ldr	r2,[sp,#12]
-	and	r3,r3,r12
-	add	r5,r5,r9
-	add	r9,r9,r0,ror#2
-	eor	r3,r3,r11
-	add	r8,r8,r2
-	eor	r2,r6,r7
-	eor	r0,r5,r5,ror#5
-	add	r9,r9,r3
-	and	r2,r2,r5
-	eor	r3,r0,r5,ror#19
-	eor	r0,r9,r9,ror#11
-	eor	r2,r2,r7
-	add	r8,r8,r3,ror#6
-	eor	r3,r9,r10
-	eor	r0,r0,r9,ror#20
-	add	r8,r8,r2
-	ldr	r2,[sp,#16]
-	and	r12,r12,r3
-	add	r4,r4,r8
-	add	r8,r8,r0,ror#2
-	eor	r12,r12,r10
-	vst1.32	{q8},[r1,:128]!
-	add	r7,r7,r2
-	eor	r2,r5,r6
-	eor	r0,r4,r4,ror#5
-	add	r8,r8,r12
-	vld1.32	{q8},[r14,:128]!
-	and	r2,r2,r4
-	eor	r12,r0,r4,ror#19
-	eor	r0,r8,r8,ror#11
-	eor	r2,r2,r6
-	vrev32.8	q1,q1
-	add	r7,r7,r12,ror#6
-	eor	r12,r8,r9
-	eor	r0,r0,r8,ror#20
-	add	r7,r7,r2
-	vadd.i32	q8,q8,q1
-	ldr	r2,[sp,#20]
-	and	r3,r3,r12
-	add	r11,r11,r7
-	add	r7,r7,r0,ror#2
-	eor	r3,r3,r9
-	add	r6,r6,r2
-	eor	r2,r4,r5
-	eor	r0,r11,r11,ror#5
-	add	r7,r7,r3
-	and	r2,r2,r11
-	eor	r3,r0,r11,ror#19
-	eor	r0,r7,r7,ror#11
-	eor	r2,r2,r5
-	add	r6,r6,r3,ror#6
-	eor	r3,r7,r8
-	eor	r0,r0,r7,ror#20
-	add	r6,r6,r2
-	ldr	r2,[sp,#24]
-	and	r12,r12,r3
-	add	r10,r10,r6
-	add	r6,r6,r0,ror#2
-	eor	r12,r12,r8
-	add	r5,r5,r2
-	eor	r2,r11,r4
-	eor	r0,r10,r10,ror#5
-	add	r6,r6,r12
-	and	r2,r2,r10
-	eor	r12,r0,r10,ror#19
-	eor	r0,r6,r6,ror#11
-	eor	r2,r2,r4
-	add	r5,r5,r12,ror#6
-	eor	r12,r6,r7
-	eor	r0,r0,r6,ror#20
-	add	r5,r5,r2
-	ldr	r2,[sp,#28]
-	and	r3,r3,r12
-	add	r9,r9,r5
-	add	r5,r5,r0,ror#2
-	eor	r3,r3,r7
-	add	r4,r4,r2
-	eor	r2,r10,r11
-	eor	r0,r9,r9,ror#5
-	add	r5,r5,r3
-	and	r2,r2,r9
-	eor	r3,r0,r9,ror#19
-	eor	r0,r5,r5,ror#11
-	eor	r2,r2,r11
-	add	r4,r4,r3,ror#6
-	eor	r3,r5,r6
-	eor	r0,r0,r5,ror#20
-	add	r4,r4,r2
-	ldr	r2,[sp,#32]
-	and	r12,r12,r3
-	add	r8,r8,r4
-	add	r4,r4,r0,ror#2
-	eor	r12,r12,r6
-	vst1.32	{q8},[r1,:128]!
-	add	r11,r11,r2
-	eor	r2,r9,r10
-	eor	r0,r8,r8,ror#5
-	add	r4,r4,r12
-	vld1.32	{q8},[r14,:128]!
-	and	r2,r2,r8
-	eor	r12,r0,r8,ror#19
-	eor	r0,r4,r4,ror#11
-	eor	r2,r2,r10
-	vrev32.8	q2,q2
-	add	r11,r11,r12,ror#6
-	eor	r12,r4,r5
-	eor	r0,r0,r4,ror#20
-	add	r11,r11,r2
-	vadd.i32	q8,q8,q2
-	ldr	r2,[sp,#36]
-	and	r3,r3,r12
-	add	r7,r7,r11
-	add	r11,r11,r0,ror#2
-	eor	r3,r3,r5
-	add	r10,r10,r2
-	eor	r2,r8,r9
-	eor	r0,r7,r7,ror#5
-	add	r11,r11,r3
-	and	r2,r2,r7
-	eor	r3,r0,r7,ror#19
-	eor	r0,r11,r11,ror#11
-	eor	r2,r2,r9
-	add	r10,r10,r3,ror#6
-	eor	r3,r11,r4
-	eor	r0,r0,r11,ror#20
-	add	r10,r10,r2
-	ldr	r2,[sp,#40]
-	and	r12,r12,r3
-	add	r6,r6,r10
-	add	r10,r10,r0,ror#2
-	eor	r12,r12,r4
-	add	r9,r9,r2
-	eor	r2,r7,r8
-	eor	r0,r6,r6,ror#5
-	add	r10,r10,r12
-	and	r2,r2,r6
-	eor	r12,r0,r6,ror#19
-	eor	r0,r10,r10,ror#11
-	eor	r2,r2,r8
-	add	r9,r9,r12,ror#6
-	eor	r12,r10,r11
-	eor	r0,r0,r10,ror#20
-	add	r9,r9,r2
-	ldr	r2,[sp,#44]
-	and	r3,r3,r12
-	add	r5,r5,r9
-	add	r9,r9,r0,ror#2
-	eor	r3,r3,r11
-	add	r8,r8,r2
-	eor	r2,r6,r7
-	eor	r0,r5,r5,ror#5
-	add	r9,r9,r3
-	and	r2,r2,r5
-	eor	r3,r0,r5,ror#19
-	eor	r0,r9,r9,ror#11
-	eor	r2,r2,r7
-	add	r8,r8,r3,ror#6
-	eor	r3,r9,r10
-	eor	r0,r0,r9,ror#20
-	add	r8,r8,r2
-	ldr	r2,[sp,#48]
-	and	r12,r12,r3
-	add	r4,r4,r8
-	add	r8,r8,r0,ror#2
-	eor	r12,r12,r10
-	vst1.32	{q8},[r1,:128]!
-	add	r7,r7,r2
-	eor	r2,r5,r6
-	eor	r0,r4,r4,ror#5
-	add	r8,r8,r12
-	vld1.32	{q8},[r14,:128]!
-	and	r2,r2,r4
-	eor	r12,r0,r4,ror#19
-	eor	r0,r8,r8,ror#11
-	eor	r2,r2,r6
-	vrev32.8	q3,q3
-	add	r7,r7,r12,ror#6
-	eor	r12,r8,r9
-	eor	r0,r0,r8,ror#20
-	add	r7,r7,r2
-	vadd.i32	q8,q8,q3
-	ldr	r2,[sp,#52]
-	and	r3,r3,r12
-	add	r11,r11,r7
-	add	r7,r7,r0,ror#2
-	eor	r3,r3,r9
-	add	r6,r6,r2
-	eor	r2,r4,r5
-	eor	r0,r11,r11,ror#5
-	add	r7,r7,r3
-	and	r2,r2,r11
-	eor	r3,r0,r11,ror#19
-	eor	r0,r7,r7,ror#11
-	eor	r2,r2,r5
-	add	r6,r6,r3,ror#6
-	eor	r3,r7,r8
-	eor	r0,r0,r7,ror#20
-	add	r6,r6,r2
-	ldr	r2,[sp,#56]
-	and	r12,r12,r3
-	add	r10,r10,r6
-	add	r6,r6,r0,ror#2
-	eor	r12,r12,r8
-	add	r5,r5,r2
-	eor	r2,r11,r4
-	eor	r0,r10,r10,ror#5
-	add	r6,r6,r12
-	and	r2,r2,r10
-	eor	r12,r0,r10,ror#19
-	eor	r0,r6,r6,ror#11
-	eor	r2,r2,r4
-	add	r5,r5,r12,ror#6
-	eor	r12,r6,r7
-	eor	r0,r0,r6,ror#20
-	add	r5,r5,r2
-	ldr	r2,[sp,#60]
-	and	r3,r3,r12
-	add	r9,r9,r5
-	add	r5,r5,r0,ror#2
-	eor	r3,r3,r7
-	add	r4,r4,r2
-	eor	r2,r10,r11
-	eor	r0,r9,r9,ror#5
-	add	r5,r5,r3
-	and	r2,r2,r9
-	eor	r3,r0,r9,ror#19
-	eor	r0,r5,r5,ror#11
-	eor	r2,r2,r11
-	add	r4,r4,r3,ror#6
-	eor	r3,r5,r6
-	eor	r0,r0,r5,ror#20
-	add	r4,r4,r2
-	ldr	r2,[sp,#64]
-	and	r12,r12,r3
-	add	r8,r8,r4
-	add	r4,r4,r0,ror#2
-	eor	r12,r12,r6
-	vst1.32	{q8},[r1,:128]!
-	ldr	r0,[r2,#0]
-	add	r4,r4,r12			@ h+=Maj(a,b,c) from the past
-	ldr	r12,[r2,#4]
-	ldr	r3,[r2,#8]
-	ldr	r1,[r2,#12]
-	add	r4,r4,r0			@ accumulate
-	ldr	r0,[r2,#16]
-	add	r5,r5,r12
-	ldr	r12,[r2,#20]
-	add	r6,r6,r3
-	ldr	r3,[r2,#24]
-	add	r7,r7,r1
-	ldr	r1,[r2,#28]
-	add	r8,r8,r0
-	str	r4,[r2],#4
-	add	r9,r9,r12
-	str	r5,[r2],#4
-	add	r10,r10,r3
-	str	r6,[r2],#4
-	add	r11,r11,r1
-	str	r7,[r2],#4
-	stmia	r2,{r8-r11}
-
-	ittte	ne
-	movne	r1,sp
-	ldrne	r2,[sp,#0]
-	eorne	r12,r12,r12
-	ldreq	sp,[sp,#76]			@ restore original sp
-	itt	ne
-	eorne	r3,r5,r6
-	bne	.L_00_48
-
-	ldmia	sp!,{r4-r12,pc}
-.size	sha256_block_data_order_neon,.-sha256_block_data_order_neon
-#endif
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-
-# ifdef __thumb2__
-#  define INST(a,b,c,d)	.byte	c,d|0xc,a,b
-# else
-#  define INST(a,b,c,d)	.byte	a,b,c,d
-# endif
-
-.type	sha256_block_data_order_armv8,%function
-.align	5
-sha256_block_data_order_armv8:
-.LARMv8:
-	vld1.32	{q0,q1},[r0]
-# ifdef __thumb2__
-	adr	r3,.LARMv8
-	sub	r3,r3,#.LARMv8-K256
-# else
-	adrl	r3,K256
-# endif
-	add	r2,r1,r2,lsl#6	@ len to point at the end of inp
-
-.Loop_v8:
-	vld1.8		{q8-q9},[r1]!
-	vld1.8		{q10-q11},[r1]!
-	vld1.32		{q12},[r3]!
-	vrev32.8	q8,q8
-	vrev32.8	q9,q9
-	vrev32.8	q10,q10
-	vrev32.8	q11,q11
-	vmov		q14,q0	@ offload
-	vmov		q15,q1
-	teq		r1,r2
-	vld1.32		{q13},[r3]!
-	vadd.i32	q12,q12,q8
-	INST(0xe2,0x03,0xfa,0xf3)	@ sha256su0 q8,q9
-	vmov		q2,q0
-	INST(0x68,0x0c,0x02,0xf3)	@ sha256h q0,q1,q12
-	INST(0x68,0x2c,0x14,0xf3)	@ sha256h2 q1,q2,q12
-	INST(0xe6,0x0c,0x64,0xf3)	@ sha256su1 q8,q10,q11
-	vld1.32		{q12},[r3]!
-	vadd.i32	q13,q13,q9
-	INST(0xe4,0x23,0xfa,0xf3)	@ sha256su0 q9,q10
-	vmov		q2,q0
-	INST(0x6a,0x0c,0x02,0xf3)	@ sha256h q0,q1,q13
-	INST(0x6a,0x2c,0x14,0xf3)	@ sha256h2 q1,q2,q13
-	INST(0xe0,0x2c,0x66,0xf3)	@ sha256su1 q9,q11,q8
-	vld1.32		{q13},[r3]!
-	vadd.i32	q12,q12,q10
-	INST(0xe6,0x43,0xfa,0xf3)	@ sha256su0 q10,q11
-	vmov		q2,q0
-	INST(0x68,0x0c,0x02,0xf3)	@ sha256h q0,q1,q12
-	INST(0x68,0x2c,0x14,0xf3)	@ sha256h2 q1,q2,q12
-	INST(0xe2,0x4c,0x60,0xf3)	@ sha256su1 q10,q8,q9
-	vld1.32		{q12},[r3]!
-	vadd.i32	q13,q13,q11
-	INST(0xe0,0x63,0xfa,0xf3)	@ sha256su0 q11,q8
-	vmov		q2,q0
-	INST(0x6a,0x0c,0x02,0xf3)	@ sha256h q0,q1,q13
-	INST(0x6a,0x2c,0x14,0xf3)	@ sha256h2 q1,q2,q13
-	INST(0xe4,0x6c,0x62,0xf3)	@ sha256su1 q11,q9,q10
-	vld1.32		{q13},[r3]!
-	vadd.i32	q12,q12,q8
-	INST(0xe2,0x03,0xfa,0xf3)	@ sha256su0 q8,q9
-	vmov		q2,q0
-	INST(0x68,0x0c,0x02,0xf3)	@ sha256h q0,q1,q12
-	INST(0x68,0x2c,0x14,0xf3)	@ sha256h2 q1,q2,q12
-	INST(0xe6,0x0c,0x64,0xf3)	@ sha256su1 q8,q10,q11
-	vld1.32		{q12},[r3]!
-	vadd.i32	q13,q13,q9
-	INST(0xe4,0x23,0xfa,0xf3)	@ sha256su0 q9,q10
-	vmov		q2,q0
-	INST(0x6a,0x0c,0x02,0xf3)	@ sha256h q0,q1,q13
-	INST(0x6a,0x2c,0x14,0xf3)	@ sha256h2 q1,q2,q13
-	INST(0xe0,0x2c,0x66,0xf3)	@ sha256su1 q9,q11,q8
-	vld1.32		{q13},[r3]!
-	vadd.i32	q12,q12,q10
-	INST(0xe6,0x43,0xfa,0xf3)	@ sha256su0 q10,q11
-	vmov		q2,q0
-	INST(0x68,0x0c,0x02,0xf3)	@ sha256h q0,q1,q12
-	INST(0x68,0x2c,0x14,0xf3)	@ sha256h2 q1,q2,q12
-	INST(0xe2,0x4c,0x60,0xf3)	@ sha256su1 q10,q8,q9
-	vld1.32		{q12},[r3]!
-	vadd.i32	q13,q13,q11
-	INST(0xe0,0x63,0xfa,0xf3)	@ sha256su0 q11,q8
-	vmov		q2,q0
-	INST(0x6a,0x0c,0x02,0xf3)	@ sha256h q0,q1,q13
-	INST(0x6a,0x2c,0x14,0xf3)	@ sha256h2 q1,q2,q13
-	INST(0xe4,0x6c,0x62,0xf3)	@ sha256su1 q11,q9,q10
-	vld1.32		{q13},[r3]!
-	vadd.i32	q12,q12,q8
-	INST(0xe2,0x03,0xfa,0xf3)	@ sha256su0 q8,q9
-	vmov		q2,q0
-	INST(0x68,0x0c,0x02,0xf3)	@ sha256h q0,q1,q12
-	INST(0x68,0x2c,0x14,0xf3)	@ sha256h2 q1,q2,q12
-	INST(0xe6,0x0c,0x64,0xf3)	@ sha256su1 q8,q10,q11
-	vld1.32		{q12},[r3]!
-	vadd.i32	q13,q13,q9
-	INST(0xe4,0x23,0xfa,0xf3)	@ sha256su0 q9,q10
-	vmov		q2,q0
-	INST(0x6a,0x0c,0x02,0xf3)	@ sha256h q0,q1,q13
-	INST(0x6a,0x2c,0x14,0xf3)	@ sha256h2 q1,q2,q13
-	INST(0xe0,0x2c,0x66,0xf3)	@ sha256su1 q9,q11,q8
-	vld1.32		{q13},[r3]!
-	vadd.i32	q12,q12,q10
-	INST(0xe6,0x43,0xfa,0xf3)	@ sha256su0 q10,q11
-	vmov		q2,q0
-	INST(0x68,0x0c,0x02,0xf3)	@ sha256h q0,q1,q12
-	INST(0x68,0x2c,0x14,0xf3)	@ sha256h2 q1,q2,q12
-	INST(0xe2,0x4c,0x60,0xf3)	@ sha256su1 q10,q8,q9
-	vld1.32		{q12},[r3]!
-	vadd.i32	q13,q13,q11
-	INST(0xe0,0x63,0xfa,0xf3)	@ sha256su0 q11,q8
-	vmov		q2,q0
-	INST(0x6a,0x0c,0x02,0xf3)	@ sha256h q0,q1,q13
-	INST(0x6a,0x2c,0x14,0xf3)	@ sha256h2 q1,q2,q13
-	INST(0xe4,0x6c,0x62,0xf3)	@ sha256su1 q11,q9,q10
-	vld1.32		{q13},[r3]!
-	vadd.i32	q12,q12,q8
-	vmov		q2,q0
-	INST(0x68,0x0c,0x02,0xf3)	@ sha256h q0,q1,q12
-	INST(0x68,0x2c,0x14,0xf3)	@ sha256h2 q1,q2,q12
-
-	vld1.32		{q12},[r3]!
-	vadd.i32	q13,q13,q9
-	vmov		q2,q0
-	INST(0x6a,0x0c,0x02,0xf3)	@ sha256h q0,q1,q13
-	INST(0x6a,0x2c,0x14,0xf3)	@ sha256h2 q1,q2,q13
-
-	vld1.32		{q13},[r3]
-	vadd.i32	q12,q12,q10
-	sub		r3,r3,#256-16	@ rewind
-	vmov		q2,q0
-	INST(0x68,0x0c,0x02,0xf3)	@ sha256h q0,q1,q12
-	INST(0x68,0x2c,0x14,0xf3)	@ sha256h2 q1,q2,q12
-
-	vadd.i32	q13,q13,q11
-	vmov		q2,q0
-	INST(0x6a,0x0c,0x02,0xf3)	@ sha256h q0,q1,q13
-	INST(0x6a,0x2c,0x14,0xf3)	@ sha256h2 q1,q2,q13
-
-	vadd.i32	q0,q0,q14
-	vadd.i32	q1,q1,q15
-	it		ne
-	bne		.Loop_v8
-
-	vst1.32		{q0,q1},[r0]
-
-	bx	lr		@ bx lr
-.size	sha256_block_data_order_armv8,.-sha256_block_data_order_armv8
-#endif
-.asciz  "SHA256 block transform for ARMv4/NEON/ARMv8, CRYPTOGAMS by <appro@openssl.org>"
-.align	2
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-.comm   OPENSSL_armcap_P,4,4
-#endif
diff --git a/arch/arm/crypto/sha512-core.S_shipped b/arch/arm/crypto/sha512-core.S_shipped
deleted file mode 100644
index 03014624f2ab..000000000000
--- a/arch/arm/crypto/sha512-core.S_shipped
+++ /dev/null
@@ -1,1869 +0,0 @@
-@ SPDX-License-Identifier: GPL-2.0
-
-@ This code is taken from the OpenSSL project but the author (Andy Polyakov)
-@ has relicensed it under the GPLv2. Therefore this program is free software;
-@ you can redistribute it and/or modify it under the terms of the GNU General
-@ Public License version 2 as published by the Free Software Foundation.
-@
-@ The original headers, including the original license headers, are
-@ included below for completeness.
-
-@ ====================================================================
-@ Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
-@ project. The module is, however, dual licensed under OpenSSL and
-@ CRYPTOGAMS licenses depending on where you obtain it. For further
-@ details see https://www.openssl.org/~appro/cryptogams/.
-@ ====================================================================
-
-@ SHA512 block procedure for ARMv4. September 2007.
-
-@ This code is ~4.5 (four and a half) times faster than code generated
-@ by gcc 3.4 and it spends ~72 clock cycles per byte [on single-issue
-@ Xscale PXA250 core].
-@
-@ July 2010.
-@
-@ Rescheduling for dual-issue pipeline resulted in 6% improvement on
-@ Cortex A8 core and ~40 cycles per processed byte.
-
-@ February 2011.
-@
-@ Profiler-assisted and platform-specific optimization resulted in 7%
-@ improvement on Coxtex A8 core and ~38 cycles per byte.
-
-@ March 2011.
-@
-@ Add NEON implementation. On Cortex A8 it was measured to process
-@ one byte in 23.3 cycles or ~60% faster than integer-only code.
-
-@ August 2012.
-@
-@ Improve NEON performance by 12% on Snapdragon S4. In absolute
-@ terms it's 22.6 cycles per byte, which is disappointing result.
-@ Technical writers asserted that 3-way S4 pipeline can sustain
-@ multiple NEON instructions per cycle, but dual NEON issue could
-@ not be observed, see https://www.openssl.org/~appro/Snapdragon-S4.html
-@ for further details. On side note Cortex-A15 processes one byte in
-@ 16 cycles.
-
-@ Byte order [in]dependence. =========================================
-@
-@ Originally caller was expected to maintain specific *dword* order in
-@ h[0-7], namely with most significant dword at *lower* address, which
-@ was reflected in below two parameters as 0 and 4. Now caller is
-@ expected to maintain native byte order for whole 64-bit values.
-#ifndef __KERNEL__
-# include "arm_arch.h"
-# define VFP_ABI_PUSH	vstmdb	sp!,{d8-d15}
-# define VFP_ABI_POP	vldmia	sp!,{d8-d15}
-#else
-# define __ARM_ARCH__ __LINUX_ARM_ARCH__
-# define __ARM_MAX_ARCH__ 7
-# define VFP_ABI_PUSH
-# define VFP_ABI_POP
-#endif
-
-#ifdef __ARMEL__
-# define LO 0
-# define HI 4
-# define WORD64(hi0,lo0,hi1,lo1)	.word	lo0,hi0, lo1,hi1
-#else
-# define HI 0
-# define LO 4
-# define WORD64(hi0,lo0,hi1,lo1)	.word	hi0,lo0, hi1,lo1
-#endif
-
-.text
-#if __ARM_ARCH__<7
-.code	32
-#else
-.syntax unified
-# ifdef __thumb2__
-.thumb
-# else
-.code   32
-# endif
-#endif
-
-.type	K512,%object
-.align	5
-K512:
-WORD64(0x428a2f98,0xd728ae22, 0x71374491,0x23ef65cd)
-WORD64(0xb5c0fbcf,0xec4d3b2f, 0xe9b5dba5,0x8189dbbc)
-WORD64(0x3956c25b,0xf348b538, 0x59f111f1,0xb605d019)
-WORD64(0x923f82a4,0xaf194f9b, 0xab1c5ed5,0xda6d8118)
-WORD64(0xd807aa98,0xa3030242, 0x12835b01,0x45706fbe)
-WORD64(0x243185be,0x4ee4b28c, 0x550c7dc3,0xd5ffb4e2)
-WORD64(0x72be5d74,0xf27b896f, 0x80deb1fe,0x3b1696b1)
-WORD64(0x9bdc06a7,0x25c71235, 0xc19bf174,0xcf692694)
-WORD64(0xe49b69c1,0x9ef14ad2, 0xefbe4786,0x384f25e3)
-WORD64(0x0fc19dc6,0x8b8cd5b5, 0x240ca1cc,0x77ac9c65)
-WORD64(0x2de92c6f,0x592b0275, 0x4a7484aa,0x6ea6e483)
-WORD64(0x5cb0a9dc,0xbd41fbd4, 0x76f988da,0x831153b5)
-WORD64(0x983e5152,0xee66dfab, 0xa831c66d,0x2db43210)
-WORD64(0xb00327c8,0x98fb213f, 0xbf597fc7,0xbeef0ee4)
-WORD64(0xc6e00bf3,0x3da88fc2, 0xd5a79147,0x930aa725)
-WORD64(0x06ca6351,0xe003826f, 0x14292967,0x0a0e6e70)
-WORD64(0x27b70a85,0x46d22ffc, 0x2e1b2138,0x5c26c926)
-WORD64(0x4d2c6dfc,0x5ac42aed, 0x53380d13,0x9d95b3df)
-WORD64(0x650a7354,0x8baf63de, 0x766a0abb,0x3c77b2a8)
-WORD64(0x81c2c92e,0x47edaee6, 0x92722c85,0x1482353b)
-WORD64(0xa2bfe8a1,0x4cf10364, 0xa81a664b,0xbc423001)
-WORD64(0xc24b8b70,0xd0f89791, 0xc76c51a3,0x0654be30)
-WORD64(0xd192e819,0xd6ef5218, 0xd6990624,0x5565a910)
-WORD64(0xf40e3585,0x5771202a, 0x106aa070,0x32bbd1b8)
-WORD64(0x19a4c116,0xb8d2d0c8, 0x1e376c08,0x5141ab53)
-WORD64(0x2748774c,0xdf8eeb99, 0x34b0bcb5,0xe19b48a8)
-WORD64(0x391c0cb3,0xc5c95a63, 0x4ed8aa4a,0xe3418acb)
-WORD64(0x5b9cca4f,0x7763e373, 0x682e6ff3,0xd6b2b8a3)
-WORD64(0x748f82ee,0x5defb2fc, 0x78a5636f,0x43172f60)
-WORD64(0x84c87814,0xa1f0ab72, 0x8cc70208,0x1a6439ec)
-WORD64(0x90befffa,0x23631e28, 0xa4506ceb,0xde82bde9)
-WORD64(0xbef9a3f7,0xb2c67915, 0xc67178f2,0xe372532b)
-WORD64(0xca273ece,0xea26619c, 0xd186b8c7,0x21c0c207)
-WORD64(0xeada7dd6,0xcde0eb1e, 0xf57d4f7f,0xee6ed178)
-WORD64(0x06f067aa,0x72176fba, 0x0a637dc5,0xa2c898a6)
-WORD64(0x113f9804,0xbef90dae, 0x1b710b35,0x131c471b)
-WORD64(0x28db77f5,0x23047d84, 0x32caab7b,0x40c72493)
-WORD64(0x3c9ebe0a,0x15c9bebc, 0x431d67c4,0x9c100d4c)
-WORD64(0x4cc5d4be,0xcb3e42b6, 0x597f299c,0xfc657e2a)
-WORD64(0x5fcb6fab,0x3ad6faec, 0x6c44198c,0x4a475817)
-.size	K512,.-K512
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-.LOPENSSL_armcap:
-.word	OPENSSL_armcap_P-sha512_block_data_order
-.skip	32-4
-#else
-.skip	32
-#endif
-
-.global	sha512_block_data_order
-.type	sha512_block_data_order,%function
-sha512_block_data_order:
-.Lsha512_block_data_order:
-#if __ARM_ARCH__<7
-	sub	r3,pc,#8		@ sha512_block_data_order
-#else
-	adr	r3,.Lsha512_block_data_order
-#endif
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-	ldr	r12,.LOPENSSL_armcap
-	ldr	r12,[r3,r12]		@ OPENSSL_armcap_P
-	tst	r12,#1
-	bne	.LNEON
-#endif
-	add	r2,r1,r2,lsl#7	@ len to point at the end of inp
-	stmdb	sp!,{r4-r12,lr}
-	sub	r14,r3,#672		@ K512
-	sub	sp,sp,#9*8
-
-	ldr	r7,[r0,#32+LO]
-	ldr	r8,[r0,#32+HI]
-	ldr	r9, [r0,#48+LO]
-	ldr	r10, [r0,#48+HI]
-	ldr	r11, [r0,#56+LO]
-	ldr	r12, [r0,#56+HI]
-.Loop:
-	str	r9, [sp,#48+0]
-	str	r10, [sp,#48+4]
-	str	r11, [sp,#56+0]
-	str	r12, [sp,#56+4]
-	ldr	r5,[r0,#0+LO]
-	ldr	r6,[r0,#0+HI]
-	ldr	r3,[r0,#8+LO]
-	ldr	r4,[r0,#8+HI]
-	ldr	r9, [r0,#16+LO]
-	ldr	r10, [r0,#16+HI]
-	ldr	r11, [r0,#24+LO]
-	ldr	r12, [r0,#24+HI]
-	str	r3,[sp,#8+0]
-	str	r4,[sp,#8+4]
-	str	r9, [sp,#16+0]
-	str	r10, [sp,#16+4]
-	str	r11, [sp,#24+0]
-	str	r12, [sp,#24+4]
-	ldr	r3,[r0,#40+LO]
-	ldr	r4,[r0,#40+HI]
-	str	r3,[sp,#40+0]
-	str	r4,[sp,#40+4]
-
-.L00_15:
-#if __ARM_ARCH__<7
-	ldrb	r3,[r1,#7]
-	ldrb	r9, [r1,#6]
-	ldrb	r10, [r1,#5]
-	ldrb	r11, [r1,#4]
-	ldrb	r4,[r1,#3]
-	ldrb	r12, [r1,#2]
-	orr	r3,r3,r9,lsl#8
-	ldrb	r9, [r1,#1]
-	orr	r3,r3,r10,lsl#16
-	ldrb	r10, [r1],#8
-	orr	r3,r3,r11,lsl#24
-	orr	r4,r4,r12,lsl#8
-	orr	r4,r4,r9,lsl#16
-	orr	r4,r4,r10,lsl#24
-#else
-	ldr	r3,[r1,#4]
-	ldr	r4,[r1],#8
-#ifdef __ARMEL__
-	rev	r3,r3
-	rev	r4,r4
-#endif
-#endif
-	@ Sigma1(x)	(ROTR((x),14) ^ ROTR((x),18)  ^ ROTR((x),41))
-	@ LO		lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23
-	@ HI		hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23
-	mov	r9,r7,lsr#14
-	str	r3,[sp,#64+0]
-	mov	r10,r8,lsr#14
-	str	r4,[sp,#64+4]
-	eor	r9,r9,r8,lsl#18
-	ldr	r11,[sp,#56+0]	@ h.lo
-	eor	r10,r10,r7,lsl#18
-	ldr	r12,[sp,#56+4]	@ h.hi
-	eor	r9,r9,r7,lsr#18
-	eor	r10,r10,r8,lsr#18
-	eor	r9,r9,r8,lsl#14
-	eor	r10,r10,r7,lsl#14
-	eor	r9,r9,r8,lsr#9
-	eor	r10,r10,r7,lsr#9
-	eor	r9,r9,r7,lsl#23
-	eor	r10,r10,r8,lsl#23	@ Sigma1(e)
-	adds	r3,r3,r9
-	ldr	r9,[sp,#40+0]	@ f.lo
-	adc	r4,r4,r10		@ T += Sigma1(e)
-	ldr	r10,[sp,#40+4]	@ f.hi
-	adds	r3,r3,r11
-	ldr	r11,[sp,#48+0]	@ g.lo
-	adc	r4,r4,r12		@ T += h
-	ldr	r12,[sp,#48+4]	@ g.hi
-
-	eor	r9,r9,r11
-	str	r7,[sp,#32+0]
-	eor	r10,r10,r12
-	str	r8,[sp,#32+4]
-	and	r9,r9,r7
-	str	r5,[sp,#0+0]
-	and	r10,r10,r8
-	str	r6,[sp,#0+4]
-	eor	r9,r9,r11
-	ldr	r11,[r14,#LO]	@ K[i].lo
-	eor	r10,r10,r12		@ Ch(e,f,g)
-	ldr	r12,[r14,#HI]	@ K[i].hi
-
-	adds	r3,r3,r9
-	ldr	r7,[sp,#24+0]	@ d.lo
-	adc	r4,r4,r10		@ T += Ch(e,f,g)
-	ldr	r8,[sp,#24+4]	@ d.hi
-	adds	r3,r3,r11
-	and	r9,r11,#0xff
-	adc	r4,r4,r12		@ T += K[i]
-	adds	r7,r7,r3
-	ldr	r11,[sp,#8+0]	@ b.lo
-	adc	r8,r8,r4		@ d += T
-	teq	r9,#148
-
-	ldr	r12,[sp,#16+0]	@ c.lo
-#if __ARM_ARCH__>=7
-	it	eq			@ Thumb2 thing, sanity check in ARM
-#endif
-	orreq	r14,r14,#1
-	@ Sigma0(x)	(ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39))
-	@ LO		lo>>28^hi<<4  ^ hi>>2^lo<<30 ^ hi>>7^lo<<25
-	@ HI		hi>>28^lo<<4  ^ lo>>2^hi<<30 ^ lo>>7^hi<<25
-	mov	r9,r5,lsr#28
-	mov	r10,r6,lsr#28
-	eor	r9,r9,r6,lsl#4
-	eor	r10,r10,r5,lsl#4
-	eor	r9,r9,r6,lsr#2
-	eor	r10,r10,r5,lsr#2
-	eor	r9,r9,r5,lsl#30
-	eor	r10,r10,r6,lsl#30
-	eor	r9,r9,r6,lsr#7
-	eor	r10,r10,r5,lsr#7
-	eor	r9,r9,r5,lsl#25
-	eor	r10,r10,r6,lsl#25	@ Sigma0(a)
-	adds	r3,r3,r9
-	and	r9,r5,r11
-	adc	r4,r4,r10		@ T += Sigma0(a)
-
-	ldr	r10,[sp,#8+4]	@ b.hi
-	orr	r5,r5,r11
-	ldr	r11,[sp,#16+4]	@ c.hi
-	and	r5,r5,r12
-	and	r12,r6,r10
-	orr	r6,r6,r10
-	orr	r5,r5,r9		@ Maj(a,b,c).lo
-	and	r6,r6,r11
-	adds	r5,r5,r3
-	orr	r6,r6,r12		@ Maj(a,b,c).hi
-	sub	sp,sp,#8
-	adc	r6,r6,r4		@ h += T
-	tst	r14,#1
-	add	r14,r14,#8
-	tst	r14,#1
-	beq	.L00_15
-	ldr	r9,[sp,#184+0]
-	ldr	r10,[sp,#184+4]
-	bic	r14,r14,#1
-.L16_79:
-	@ sigma0(x)	(ROTR((x),1)  ^ ROTR((x),8)  ^ ((x)>>7))
-	@ LO		lo>>1^hi<<31  ^ lo>>8^hi<<24 ^ lo>>7^hi<<25
-	@ HI		hi>>1^lo<<31  ^ hi>>8^lo<<24 ^ hi>>7
-	mov	r3,r9,lsr#1
-	ldr	r11,[sp,#80+0]
-	mov	r4,r10,lsr#1
-	ldr	r12,[sp,#80+4]
-	eor	r3,r3,r10,lsl#31
-	eor	r4,r4,r9,lsl#31
-	eor	r3,r3,r9,lsr#8
-	eor	r4,r4,r10,lsr#8
-	eor	r3,r3,r10,lsl#24
-	eor	r4,r4,r9,lsl#24
-	eor	r3,r3,r9,lsr#7
-	eor	r4,r4,r10,lsr#7
-	eor	r3,r3,r10,lsl#25
-
-	@ sigma1(x)	(ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6))
-	@ LO		lo>>19^hi<<13 ^ hi>>29^lo<<3 ^ lo>>6^hi<<26
-	@ HI		hi>>19^lo<<13 ^ lo>>29^hi<<3 ^ hi>>6
-	mov	r9,r11,lsr#19
-	mov	r10,r12,lsr#19
-	eor	r9,r9,r12,lsl#13
-	eor	r10,r10,r11,lsl#13
-	eor	r9,r9,r12,lsr#29
-	eor	r10,r10,r11,lsr#29
-	eor	r9,r9,r11,lsl#3
-	eor	r10,r10,r12,lsl#3
-	eor	r9,r9,r11,lsr#6
-	eor	r10,r10,r12,lsr#6
-	ldr	r11,[sp,#120+0]
-	eor	r9,r9,r12,lsl#26
-
-	ldr	r12,[sp,#120+4]
-	adds	r3,r3,r9
-	ldr	r9,[sp,#192+0]
-	adc	r4,r4,r10
-
-	ldr	r10,[sp,#192+4]
-	adds	r3,r3,r11
-	adc	r4,r4,r12
-	adds	r3,r3,r9
-	adc	r4,r4,r10
-	@ Sigma1(x)	(ROTR((x),14) ^ ROTR((x),18)  ^ ROTR((x),41))
-	@ LO		lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23
-	@ HI		hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23
-	mov	r9,r7,lsr#14
-	str	r3,[sp,#64+0]
-	mov	r10,r8,lsr#14
-	str	r4,[sp,#64+4]
-	eor	r9,r9,r8,lsl#18
-	ldr	r11,[sp,#56+0]	@ h.lo
-	eor	r10,r10,r7,lsl#18
-	ldr	r12,[sp,#56+4]	@ h.hi
-	eor	r9,r9,r7,lsr#18
-	eor	r10,r10,r8,lsr#18
-	eor	r9,r9,r8,lsl#14
-	eor	r10,r10,r7,lsl#14
-	eor	r9,r9,r8,lsr#9
-	eor	r10,r10,r7,lsr#9
-	eor	r9,r9,r7,lsl#23
-	eor	r10,r10,r8,lsl#23	@ Sigma1(e)
-	adds	r3,r3,r9
-	ldr	r9,[sp,#40+0]	@ f.lo
-	adc	r4,r4,r10		@ T += Sigma1(e)
-	ldr	r10,[sp,#40+4]	@ f.hi
-	adds	r3,r3,r11
-	ldr	r11,[sp,#48+0]	@ g.lo
-	adc	r4,r4,r12		@ T += h
-	ldr	r12,[sp,#48+4]	@ g.hi
-
-	eor	r9,r9,r11
-	str	r7,[sp,#32+0]
-	eor	r10,r10,r12
-	str	r8,[sp,#32+4]
-	and	r9,r9,r7
-	str	r5,[sp,#0+0]
-	and	r10,r10,r8
-	str	r6,[sp,#0+4]
-	eor	r9,r9,r11
-	ldr	r11,[r14,#LO]	@ K[i].lo
-	eor	r10,r10,r12		@ Ch(e,f,g)
-	ldr	r12,[r14,#HI]	@ K[i].hi
-
-	adds	r3,r3,r9
-	ldr	r7,[sp,#24+0]	@ d.lo
-	adc	r4,r4,r10		@ T += Ch(e,f,g)
-	ldr	r8,[sp,#24+4]	@ d.hi
-	adds	r3,r3,r11
-	and	r9,r11,#0xff
-	adc	r4,r4,r12		@ T += K[i]
-	adds	r7,r7,r3
-	ldr	r11,[sp,#8+0]	@ b.lo
-	adc	r8,r8,r4		@ d += T
-	teq	r9,#23
-
-	ldr	r12,[sp,#16+0]	@ c.lo
-#if __ARM_ARCH__>=7
-	it	eq			@ Thumb2 thing, sanity check in ARM
-#endif
-	orreq	r14,r14,#1
-	@ Sigma0(x)	(ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39))
-	@ LO		lo>>28^hi<<4  ^ hi>>2^lo<<30 ^ hi>>7^lo<<25
-	@ HI		hi>>28^lo<<4  ^ lo>>2^hi<<30 ^ lo>>7^hi<<25
-	mov	r9,r5,lsr#28
-	mov	r10,r6,lsr#28
-	eor	r9,r9,r6,lsl#4
-	eor	r10,r10,r5,lsl#4
-	eor	r9,r9,r6,lsr#2
-	eor	r10,r10,r5,lsr#2
-	eor	r9,r9,r5,lsl#30
-	eor	r10,r10,r6,lsl#30
-	eor	r9,r9,r6,lsr#7
-	eor	r10,r10,r5,lsr#7
-	eor	r9,r9,r5,lsl#25
-	eor	r10,r10,r6,lsl#25	@ Sigma0(a)
-	adds	r3,r3,r9
-	and	r9,r5,r11
-	adc	r4,r4,r10		@ T += Sigma0(a)
-
-	ldr	r10,[sp,#8+4]	@ b.hi
-	orr	r5,r5,r11
-	ldr	r11,[sp,#16+4]	@ c.hi
-	and	r5,r5,r12
-	and	r12,r6,r10
-	orr	r6,r6,r10
-	orr	r5,r5,r9		@ Maj(a,b,c).lo
-	and	r6,r6,r11
-	adds	r5,r5,r3
-	orr	r6,r6,r12		@ Maj(a,b,c).hi
-	sub	sp,sp,#8
-	adc	r6,r6,r4		@ h += T
-	tst	r14,#1
-	add	r14,r14,#8
-#if __ARM_ARCH__>=7
-	ittt	eq			@ Thumb2 thing, sanity check in ARM
-#endif
-	ldreq	r9,[sp,#184+0]
-	ldreq	r10,[sp,#184+4]
-	beq	.L16_79
-	bic	r14,r14,#1
-
-	ldr	r3,[sp,#8+0]
-	ldr	r4,[sp,#8+4]
-	ldr	r9, [r0,#0+LO]
-	ldr	r10, [r0,#0+HI]
-	ldr	r11, [r0,#8+LO]
-	ldr	r12, [r0,#8+HI]
-	adds	r9,r5,r9
-	str	r9, [r0,#0+LO]
-	adc	r10,r6,r10
-	str	r10, [r0,#0+HI]
-	adds	r11,r3,r11
-	str	r11, [r0,#8+LO]
-	adc	r12,r4,r12
-	str	r12, [r0,#8+HI]
-
-	ldr	r5,[sp,#16+0]
-	ldr	r6,[sp,#16+4]
-	ldr	r3,[sp,#24+0]
-	ldr	r4,[sp,#24+4]
-	ldr	r9, [r0,#16+LO]
-	ldr	r10, [r0,#16+HI]
-	ldr	r11, [r0,#24+LO]
-	ldr	r12, [r0,#24+HI]
-	adds	r9,r5,r9
-	str	r9, [r0,#16+LO]
-	adc	r10,r6,r10
-	str	r10, [r0,#16+HI]
-	adds	r11,r3,r11
-	str	r11, [r0,#24+LO]
-	adc	r12,r4,r12
-	str	r12, [r0,#24+HI]
-
-	ldr	r3,[sp,#40+0]
-	ldr	r4,[sp,#40+4]
-	ldr	r9, [r0,#32+LO]
-	ldr	r10, [r0,#32+HI]
-	ldr	r11, [r0,#40+LO]
-	ldr	r12, [r0,#40+HI]
-	adds	r7,r7,r9
-	str	r7,[r0,#32+LO]
-	adc	r8,r8,r10
-	str	r8,[r0,#32+HI]
-	adds	r11,r3,r11
-	str	r11, [r0,#40+LO]
-	adc	r12,r4,r12
-	str	r12, [r0,#40+HI]
-
-	ldr	r5,[sp,#48+0]
-	ldr	r6,[sp,#48+4]
-	ldr	r3,[sp,#56+0]
-	ldr	r4,[sp,#56+4]
-	ldr	r9, [r0,#48+LO]
-	ldr	r10, [r0,#48+HI]
-	ldr	r11, [r0,#56+LO]
-	ldr	r12, [r0,#56+HI]
-	adds	r9,r5,r9
-	str	r9, [r0,#48+LO]
-	adc	r10,r6,r10
-	str	r10, [r0,#48+HI]
-	adds	r11,r3,r11
-	str	r11, [r0,#56+LO]
-	adc	r12,r4,r12
-	str	r12, [r0,#56+HI]
-
-	add	sp,sp,#640
-	sub	r14,r14,#640
-
-	teq	r1,r2
-	bne	.Loop
-
-	add	sp,sp,#8*9		@ destroy frame
-#if __ARM_ARCH__>=5
-	ldmia	sp!,{r4-r12,pc}
-#else
-	ldmia	sp!,{r4-r12,lr}
-	tst	lr,#1
-	moveq	pc,lr			@ be binary compatible with V4, yet
-	.word	0xe12fff1e			@ interoperable with Thumb ISA:-)
-#endif
-.size	sha512_block_data_order,.-sha512_block_data_order
-#if __ARM_MAX_ARCH__>=7
-.arch	armv7-a
-.fpu	neon
-
-.global	sha512_block_data_order_neon
-.type	sha512_block_data_order_neon,%function
-.align	4
-sha512_block_data_order_neon:
-.LNEON:
-	dmb				@ errata #451034 on early Cortex A8
-	add	r2,r1,r2,lsl#7	@ len to point at the end of inp
-	VFP_ABI_PUSH
-	adr	r3,.Lsha512_block_data_order
-	sub	r3,r3,.Lsha512_block_data_order-K512
-	vldmia	r0,{d16-d23}		@ load context
-.Loop_neon:
-	vshr.u64	d24,d20,#14	@ 0
-#if 0<16
-	vld1.64		{d0},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d20,#18
-#if 0>0
-	 vadd.i64	d16,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d20,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d20,#50
-	vsli.64		d25,d20,#46
-	vmov		d29,d20
-	vsli.64		d26,d20,#23
-#if 0<16 && defined(__ARMEL__)
-	vrev64.8	d0,d0
-#endif
-	veor		d25,d24
-	vbsl		d29,d21,d22		@ Ch(e,f,g)
-	vshr.u64	d24,d16,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d23
-	vshr.u64	d25,d16,#34
-	vsli.64		d24,d16,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d16,#39
-	vadd.i64	d28,d0
-	vsli.64		d25,d16,#30
-	veor		d30,d16,d17
-	vsli.64		d26,d16,#25
-	veor		d23,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d18,d17		@ Maj(a,b,c)
-	veor		d23,d26			@ Sigma0(a)
-	vadd.i64	d19,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d23,d30
-	vshr.u64	d24,d19,#14	@ 1
-#if 1<16
-	vld1.64		{d1},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d19,#18
-#if 1>0
-	 vadd.i64	d23,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d19,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d19,#50
-	vsli.64		d25,d19,#46
-	vmov		d29,d19
-	vsli.64		d26,d19,#23
-#if 1<16 && defined(__ARMEL__)
-	vrev64.8	d1,d1
-#endif
-	veor		d25,d24
-	vbsl		d29,d20,d21		@ Ch(e,f,g)
-	vshr.u64	d24,d23,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d22
-	vshr.u64	d25,d23,#34
-	vsli.64		d24,d23,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d23,#39
-	vadd.i64	d28,d1
-	vsli.64		d25,d23,#30
-	veor		d30,d23,d16
-	vsli.64		d26,d23,#25
-	veor		d22,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d17,d16		@ Maj(a,b,c)
-	veor		d22,d26			@ Sigma0(a)
-	vadd.i64	d18,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d22,d30
-	vshr.u64	d24,d18,#14	@ 2
-#if 2<16
-	vld1.64		{d2},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d18,#18
-#if 2>0
-	 vadd.i64	d22,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d18,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d18,#50
-	vsli.64		d25,d18,#46
-	vmov		d29,d18
-	vsli.64		d26,d18,#23
-#if 2<16 && defined(__ARMEL__)
-	vrev64.8	d2,d2
-#endif
-	veor		d25,d24
-	vbsl		d29,d19,d20		@ Ch(e,f,g)
-	vshr.u64	d24,d22,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d21
-	vshr.u64	d25,d22,#34
-	vsli.64		d24,d22,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d22,#39
-	vadd.i64	d28,d2
-	vsli.64		d25,d22,#30
-	veor		d30,d22,d23
-	vsli.64		d26,d22,#25
-	veor		d21,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d16,d23		@ Maj(a,b,c)
-	veor		d21,d26			@ Sigma0(a)
-	vadd.i64	d17,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d21,d30
-	vshr.u64	d24,d17,#14	@ 3
-#if 3<16
-	vld1.64		{d3},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d17,#18
-#if 3>0
-	 vadd.i64	d21,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d17,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d17,#50
-	vsli.64		d25,d17,#46
-	vmov		d29,d17
-	vsli.64		d26,d17,#23
-#if 3<16 && defined(__ARMEL__)
-	vrev64.8	d3,d3
-#endif
-	veor		d25,d24
-	vbsl		d29,d18,d19		@ Ch(e,f,g)
-	vshr.u64	d24,d21,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d20
-	vshr.u64	d25,d21,#34
-	vsli.64		d24,d21,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d21,#39
-	vadd.i64	d28,d3
-	vsli.64		d25,d21,#30
-	veor		d30,d21,d22
-	vsli.64		d26,d21,#25
-	veor		d20,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d23,d22		@ Maj(a,b,c)
-	veor		d20,d26			@ Sigma0(a)
-	vadd.i64	d16,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d20,d30
-	vshr.u64	d24,d16,#14	@ 4
-#if 4<16
-	vld1.64		{d4},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d16,#18
-#if 4>0
-	 vadd.i64	d20,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d16,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d16,#50
-	vsli.64		d25,d16,#46
-	vmov		d29,d16
-	vsli.64		d26,d16,#23
-#if 4<16 && defined(__ARMEL__)
-	vrev64.8	d4,d4
-#endif
-	veor		d25,d24
-	vbsl		d29,d17,d18		@ Ch(e,f,g)
-	vshr.u64	d24,d20,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d19
-	vshr.u64	d25,d20,#34
-	vsli.64		d24,d20,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d20,#39
-	vadd.i64	d28,d4
-	vsli.64		d25,d20,#30
-	veor		d30,d20,d21
-	vsli.64		d26,d20,#25
-	veor		d19,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d22,d21		@ Maj(a,b,c)
-	veor		d19,d26			@ Sigma0(a)
-	vadd.i64	d23,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d19,d30
-	vshr.u64	d24,d23,#14	@ 5
-#if 5<16
-	vld1.64		{d5},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d23,#18
-#if 5>0
-	 vadd.i64	d19,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d23,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d23,#50
-	vsli.64		d25,d23,#46
-	vmov		d29,d23
-	vsli.64		d26,d23,#23
-#if 5<16 && defined(__ARMEL__)
-	vrev64.8	d5,d5
-#endif
-	veor		d25,d24
-	vbsl		d29,d16,d17		@ Ch(e,f,g)
-	vshr.u64	d24,d19,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d18
-	vshr.u64	d25,d19,#34
-	vsli.64		d24,d19,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d19,#39
-	vadd.i64	d28,d5
-	vsli.64		d25,d19,#30
-	veor		d30,d19,d20
-	vsli.64		d26,d19,#25
-	veor		d18,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d21,d20		@ Maj(a,b,c)
-	veor		d18,d26			@ Sigma0(a)
-	vadd.i64	d22,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d18,d30
-	vshr.u64	d24,d22,#14	@ 6
-#if 6<16
-	vld1.64		{d6},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d22,#18
-#if 6>0
-	 vadd.i64	d18,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d22,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d22,#50
-	vsli.64		d25,d22,#46
-	vmov		d29,d22
-	vsli.64		d26,d22,#23
-#if 6<16 && defined(__ARMEL__)
-	vrev64.8	d6,d6
-#endif
-	veor		d25,d24
-	vbsl		d29,d23,d16		@ Ch(e,f,g)
-	vshr.u64	d24,d18,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d17
-	vshr.u64	d25,d18,#34
-	vsli.64		d24,d18,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d18,#39
-	vadd.i64	d28,d6
-	vsli.64		d25,d18,#30
-	veor		d30,d18,d19
-	vsli.64		d26,d18,#25
-	veor		d17,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d20,d19		@ Maj(a,b,c)
-	veor		d17,d26			@ Sigma0(a)
-	vadd.i64	d21,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d17,d30
-	vshr.u64	d24,d21,#14	@ 7
-#if 7<16
-	vld1.64		{d7},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d21,#18
-#if 7>0
-	 vadd.i64	d17,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d21,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d21,#50
-	vsli.64		d25,d21,#46
-	vmov		d29,d21
-	vsli.64		d26,d21,#23
-#if 7<16 && defined(__ARMEL__)
-	vrev64.8	d7,d7
-#endif
-	veor		d25,d24
-	vbsl		d29,d22,d23		@ Ch(e,f,g)
-	vshr.u64	d24,d17,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d16
-	vshr.u64	d25,d17,#34
-	vsli.64		d24,d17,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d17,#39
-	vadd.i64	d28,d7
-	vsli.64		d25,d17,#30
-	veor		d30,d17,d18
-	vsli.64		d26,d17,#25
-	veor		d16,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d19,d18		@ Maj(a,b,c)
-	veor		d16,d26			@ Sigma0(a)
-	vadd.i64	d20,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d16,d30
-	vshr.u64	d24,d20,#14	@ 8
-#if 8<16
-	vld1.64		{d8},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d20,#18
-#if 8>0
-	 vadd.i64	d16,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d20,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d20,#50
-	vsli.64		d25,d20,#46
-	vmov		d29,d20
-	vsli.64		d26,d20,#23
-#if 8<16 && defined(__ARMEL__)
-	vrev64.8	d8,d8
-#endif
-	veor		d25,d24
-	vbsl		d29,d21,d22		@ Ch(e,f,g)
-	vshr.u64	d24,d16,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d23
-	vshr.u64	d25,d16,#34
-	vsli.64		d24,d16,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d16,#39
-	vadd.i64	d28,d8
-	vsli.64		d25,d16,#30
-	veor		d30,d16,d17
-	vsli.64		d26,d16,#25
-	veor		d23,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d18,d17		@ Maj(a,b,c)
-	veor		d23,d26			@ Sigma0(a)
-	vadd.i64	d19,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d23,d30
-	vshr.u64	d24,d19,#14	@ 9
-#if 9<16
-	vld1.64		{d9},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d19,#18
-#if 9>0
-	 vadd.i64	d23,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d19,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d19,#50
-	vsli.64		d25,d19,#46
-	vmov		d29,d19
-	vsli.64		d26,d19,#23
-#if 9<16 && defined(__ARMEL__)
-	vrev64.8	d9,d9
-#endif
-	veor		d25,d24
-	vbsl		d29,d20,d21		@ Ch(e,f,g)
-	vshr.u64	d24,d23,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d22
-	vshr.u64	d25,d23,#34
-	vsli.64		d24,d23,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d23,#39
-	vadd.i64	d28,d9
-	vsli.64		d25,d23,#30
-	veor		d30,d23,d16
-	vsli.64		d26,d23,#25
-	veor		d22,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d17,d16		@ Maj(a,b,c)
-	veor		d22,d26			@ Sigma0(a)
-	vadd.i64	d18,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d22,d30
-	vshr.u64	d24,d18,#14	@ 10
-#if 10<16
-	vld1.64		{d10},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d18,#18
-#if 10>0
-	 vadd.i64	d22,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d18,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d18,#50
-	vsli.64		d25,d18,#46
-	vmov		d29,d18
-	vsli.64		d26,d18,#23
-#if 10<16 && defined(__ARMEL__)
-	vrev64.8	d10,d10
-#endif
-	veor		d25,d24
-	vbsl		d29,d19,d20		@ Ch(e,f,g)
-	vshr.u64	d24,d22,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d21
-	vshr.u64	d25,d22,#34
-	vsli.64		d24,d22,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d22,#39
-	vadd.i64	d28,d10
-	vsli.64		d25,d22,#30
-	veor		d30,d22,d23
-	vsli.64		d26,d22,#25
-	veor		d21,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d16,d23		@ Maj(a,b,c)
-	veor		d21,d26			@ Sigma0(a)
-	vadd.i64	d17,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d21,d30
-	vshr.u64	d24,d17,#14	@ 11
-#if 11<16
-	vld1.64		{d11},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d17,#18
-#if 11>0
-	 vadd.i64	d21,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d17,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d17,#50
-	vsli.64		d25,d17,#46
-	vmov		d29,d17
-	vsli.64		d26,d17,#23
-#if 11<16 && defined(__ARMEL__)
-	vrev64.8	d11,d11
-#endif
-	veor		d25,d24
-	vbsl		d29,d18,d19		@ Ch(e,f,g)
-	vshr.u64	d24,d21,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d20
-	vshr.u64	d25,d21,#34
-	vsli.64		d24,d21,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d21,#39
-	vadd.i64	d28,d11
-	vsli.64		d25,d21,#30
-	veor		d30,d21,d22
-	vsli.64		d26,d21,#25
-	veor		d20,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d23,d22		@ Maj(a,b,c)
-	veor		d20,d26			@ Sigma0(a)
-	vadd.i64	d16,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d20,d30
-	vshr.u64	d24,d16,#14	@ 12
-#if 12<16
-	vld1.64		{d12},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d16,#18
-#if 12>0
-	 vadd.i64	d20,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d16,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d16,#50
-	vsli.64		d25,d16,#46
-	vmov		d29,d16
-	vsli.64		d26,d16,#23
-#if 12<16 && defined(__ARMEL__)
-	vrev64.8	d12,d12
-#endif
-	veor		d25,d24
-	vbsl		d29,d17,d18		@ Ch(e,f,g)
-	vshr.u64	d24,d20,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d19
-	vshr.u64	d25,d20,#34
-	vsli.64		d24,d20,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d20,#39
-	vadd.i64	d28,d12
-	vsli.64		d25,d20,#30
-	veor		d30,d20,d21
-	vsli.64		d26,d20,#25
-	veor		d19,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d22,d21		@ Maj(a,b,c)
-	veor		d19,d26			@ Sigma0(a)
-	vadd.i64	d23,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d19,d30
-	vshr.u64	d24,d23,#14	@ 13
-#if 13<16
-	vld1.64		{d13},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d23,#18
-#if 13>0
-	 vadd.i64	d19,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d23,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d23,#50
-	vsli.64		d25,d23,#46
-	vmov		d29,d23
-	vsli.64		d26,d23,#23
-#if 13<16 && defined(__ARMEL__)
-	vrev64.8	d13,d13
-#endif
-	veor		d25,d24
-	vbsl		d29,d16,d17		@ Ch(e,f,g)
-	vshr.u64	d24,d19,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d18
-	vshr.u64	d25,d19,#34
-	vsli.64		d24,d19,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d19,#39
-	vadd.i64	d28,d13
-	vsli.64		d25,d19,#30
-	veor		d30,d19,d20
-	vsli.64		d26,d19,#25
-	veor		d18,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d21,d20		@ Maj(a,b,c)
-	veor		d18,d26			@ Sigma0(a)
-	vadd.i64	d22,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d18,d30
-	vshr.u64	d24,d22,#14	@ 14
-#if 14<16
-	vld1.64		{d14},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d22,#18
-#if 14>0
-	 vadd.i64	d18,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d22,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d22,#50
-	vsli.64		d25,d22,#46
-	vmov		d29,d22
-	vsli.64		d26,d22,#23
-#if 14<16 && defined(__ARMEL__)
-	vrev64.8	d14,d14
-#endif
-	veor		d25,d24
-	vbsl		d29,d23,d16		@ Ch(e,f,g)
-	vshr.u64	d24,d18,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d17
-	vshr.u64	d25,d18,#34
-	vsli.64		d24,d18,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d18,#39
-	vadd.i64	d28,d14
-	vsli.64		d25,d18,#30
-	veor		d30,d18,d19
-	vsli.64		d26,d18,#25
-	veor		d17,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d20,d19		@ Maj(a,b,c)
-	veor		d17,d26			@ Sigma0(a)
-	vadd.i64	d21,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d17,d30
-	vshr.u64	d24,d21,#14	@ 15
-#if 15<16
-	vld1.64		{d15},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d21,#18
-#if 15>0
-	 vadd.i64	d17,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d21,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d21,#50
-	vsli.64		d25,d21,#46
-	vmov		d29,d21
-	vsli.64		d26,d21,#23
-#if 15<16 && defined(__ARMEL__)
-	vrev64.8	d15,d15
-#endif
-	veor		d25,d24
-	vbsl		d29,d22,d23		@ Ch(e,f,g)
-	vshr.u64	d24,d17,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d16
-	vshr.u64	d25,d17,#34
-	vsli.64		d24,d17,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d17,#39
-	vadd.i64	d28,d15
-	vsli.64		d25,d17,#30
-	veor		d30,d17,d18
-	vsli.64		d26,d17,#25
-	veor		d16,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d19,d18		@ Maj(a,b,c)
-	veor		d16,d26			@ Sigma0(a)
-	vadd.i64	d20,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d16,d30
-	mov		r12,#4
-.L16_79_neon:
-	subs		r12,#1
-	vshr.u64	q12,q7,#19
-	vshr.u64	q13,q7,#61
-	 vadd.i64	d16,d30			@ h+=Maj from the past
-	vshr.u64	q15,q7,#6
-	vsli.64		q12,q7,#45
-	vext.8		q14,q0,q1,#8	@ X[i+1]
-	vsli.64		q13,q7,#3
-	veor		q15,q12
-	vshr.u64	q12,q14,#1
-	veor		q15,q13				@ sigma1(X[i+14])
-	vshr.u64	q13,q14,#8
-	vadd.i64	q0,q15
-	vshr.u64	q15,q14,#7
-	vsli.64		q12,q14,#63
-	vsli.64		q13,q14,#56
-	vext.8		q14,q4,q5,#8	@ X[i+9]
-	veor		q15,q12
-	vshr.u64	d24,d20,#14		@ from NEON_00_15
-	vadd.i64	q0,q14
-	vshr.u64	d25,d20,#18		@ from NEON_00_15
-	veor		q15,q13				@ sigma0(X[i+1])
-	vshr.u64	d26,d20,#41		@ from NEON_00_15
-	vadd.i64	q0,q15
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d20,#50
-	vsli.64		d25,d20,#46
-	vmov		d29,d20
-	vsli.64		d26,d20,#23
-#if 16<16 && defined(__ARMEL__)
-	vrev64.8	,
-#endif
-	veor		d25,d24
-	vbsl		d29,d21,d22		@ Ch(e,f,g)
-	vshr.u64	d24,d16,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d23
-	vshr.u64	d25,d16,#34
-	vsli.64		d24,d16,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d16,#39
-	vadd.i64	d28,d0
-	vsli.64		d25,d16,#30
-	veor		d30,d16,d17
-	vsli.64		d26,d16,#25
-	veor		d23,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d18,d17		@ Maj(a,b,c)
-	veor		d23,d26			@ Sigma0(a)
-	vadd.i64	d19,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d23,d30
-	vshr.u64	d24,d19,#14	@ 17
-#if 17<16
-	vld1.64		{d1},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d19,#18
-#if 17>0
-	 vadd.i64	d23,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d19,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d19,#50
-	vsli.64		d25,d19,#46
-	vmov		d29,d19
-	vsli.64		d26,d19,#23
-#if 17<16 && defined(__ARMEL__)
-	vrev64.8	,
-#endif
-	veor		d25,d24
-	vbsl		d29,d20,d21		@ Ch(e,f,g)
-	vshr.u64	d24,d23,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d22
-	vshr.u64	d25,d23,#34
-	vsli.64		d24,d23,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d23,#39
-	vadd.i64	d28,d1
-	vsli.64		d25,d23,#30
-	veor		d30,d23,d16
-	vsli.64		d26,d23,#25
-	veor		d22,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d17,d16		@ Maj(a,b,c)
-	veor		d22,d26			@ Sigma0(a)
-	vadd.i64	d18,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d22,d30
-	vshr.u64	q12,q0,#19
-	vshr.u64	q13,q0,#61
-	 vadd.i64	d22,d30			@ h+=Maj from the past
-	vshr.u64	q15,q0,#6
-	vsli.64		q12,q0,#45
-	vext.8		q14,q1,q2,#8	@ X[i+1]
-	vsli.64		q13,q0,#3
-	veor		q15,q12
-	vshr.u64	q12,q14,#1
-	veor		q15,q13				@ sigma1(X[i+14])
-	vshr.u64	q13,q14,#8
-	vadd.i64	q1,q15
-	vshr.u64	q15,q14,#7
-	vsli.64		q12,q14,#63
-	vsli.64		q13,q14,#56
-	vext.8		q14,q5,q6,#8	@ X[i+9]
-	veor		q15,q12
-	vshr.u64	d24,d18,#14		@ from NEON_00_15
-	vadd.i64	q1,q14
-	vshr.u64	d25,d18,#18		@ from NEON_00_15
-	veor		q15,q13				@ sigma0(X[i+1])
-	vshr.u64	d26,d18,#41		@ from NEON_00_15
-	vadd.i64	q1,q15
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d18,#50
-	vsli.64		d25,d18,#46
-	vmov		d29,d18
-	vsli.64		d26,d18,#23
-#if 18<16 && defined(__ARMEL__)
-	vrev64.8	,
-#endif
-	veor		d25,d24
-	vbsl		d29,d19,d20		@ Ch(e,f,g)
-	vshr.u64	d24,d22,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d21
-	vshr.u64	d25,d22,#34
-	vsli.64		d24,d22,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d22,#39
-	vadd.i64	d28,d2
-	vsli.64		d25,d22,#30
-	veor		d30,d22,d23
-	vsli.64		d26,d22,#25
-	veor		d21,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d16,d23		@ Maj(a,b,c)
-	veor		d21,d26			@ Sigma0(a)
-	vadd.i64	d17,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d21,d30
-	vshr.u64	d24,d17,#14	@ 19
-#if 19<16
-	vld1.64		{d3},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d17,#18
-#if 19>0
-	 vadd.i64	d21,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d17,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d17,#50
-	vsli.64		d25,d17,#46
-	vmov		d29,d17
-	vsli.64		d26,d17,#23
-#if 19<16 && defined(__ARMEL__)
-	vrev64.8	,
-#endif
-	veor		d25,d24
-	vbsl		d29,d18,d19		@ Ch(e,f,g)
-	vshr.u64	d24,d21,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d20
-	vshr.u64	d25,d21,#34
-	vsli.64		d24,d21,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d21,#39
-	vadd.i64	d28,d3
-	vsli.64		d25,d21,#30
-	veor		d30,d21,d22
-	vsli.64		d26,d21,#25
-	veor		d20,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d23,d22		@ Maj(a,b,c)
-	veor		d20,d26			@ Sigma0(a)
-	vadd.i64	d16,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d20,d30
-	vshr.u64	q12,q1,#19
-	vshr.u64	q13,q1,#61
-	 vadd.i64	d20,d30			@ h+=Maj from the past
-	vshr.u64	q15,q1,#6
-	vsli.64		q12,q1,#45
-	vext.8		q14,q2,q3,#8	@ X[i+1]
-	vsli.64		q13,q1,#3
-	veor		q15,q12
-	vshr.u64	q12,q14,#1
-	veor		q15,q13				@ sigma1(X[i+14])
-	vshr.u64	q13,q14,#8
-	vadd.i64	q2,q15
-	vshr.u64	q15,q14,#7
-	vsli.64		q12,q14,#63
-	vsli.64		q13,q14,#56
-	vext.8		q14,q6,q7,#8	@ X[i+9]
-	veor		q15,q12
-	vshr.u64	d24,d16,#14		@ from NEON_00_15
-	vadd.i64	q2,q14
-	vshr.u64	d25,d16,#18		@ from NEON_00_15
-	veor		q15,q13				@ sigma0(X[i+1])
-	vshr.u64	d26,d16,#41		@ from NEON_00_15
-	vadd.i64	q2,q15
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d16,#50
-	vsli.64		d25,d16,#46
-	vmov		d29,d16
-	vsli.64		d26,d16,#23
-#if 20<16 && defined(__ARMEL__)
-	vrev64.8	,
-#endif
-	veor		d25,d24
-	vbsl		d29,d17,d18		@ Ch(e,f,g)
-	vshr.u64	d24,d20,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d19
-	vshr.u64	d25,d20,#34
-	vsli.64		d24,d20,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d20,#39
-	vadd.i64	d28,d4
-	vsli.64		d25,d20,#30
-	veor		d30,d20,d21
-	vsli.64		d26,d20,#25
-	veor		d19,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d22,d21		@ Maj(a,b,c)
-	veor		d19,d26			@ Sigma0(a)
-	vadd.i64	d23,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d19,d30
-	vshr.u64	d24,d23,#14	@ 21
-#if 21<16
-	vld1.64		{d5},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d23,#18
-#if 21>0
-	 vadd.i64	d19,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d23,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d23,#50
-	vsli.64		d25,d23,#46
-	vmov		d29,d23
-	vsli.64		d26,d23,#23
-#if 21<16 && defined(__ARMEL__)
-	vrev64.8	,
-#endif
-	veor		d25,d24
-	vbsl		d29,d16,d17		@ Ch(e,f,g)
-	vshr.u64	d24,d19,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d18
-	vshr.u64	d25,d19,#34
-	vsli.64		d24,d19,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d19,#39
-	vadd.i64	d28,d5
-	vsli.64		d25,d19,#30
-	veor		d30,d19,d20
-	vsli.64		d26,d19,#25
-	veor		d18,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d21,d20		@ Maj(a,b,c)
-	veor		d18,d26			@ Sigma0(a)
-	vadd.i64	d22,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d18,d30
-	vshr.u64	q12,q2,#19
-	vshr.u64	q13,q2,#61
-	 vadd.i64	d18,d30			@ h+=Maj from the past
-	vshr.u64	q15,q2,#6
-	vsli.64		q12,q2,#45
-	vext.8		q14,q3,q4,#8	@ X[i+1]
-	vsli.64		q13,q2,#3
-	veor		q15,q12
-	vshr.u64	q12,q14,#1
-	veor		q15,q13				@ sigma1(X[i+14])
-	vshr.u64	q13,q14,#8
-	vadd.i64	q3,q15
-	vshr.u64	q15,q14,#7
-	vsli.64		q12,q14,#63
-	vsli.64		q13,q14,#56
-	vext.8		q14,q7,q0,#8	@ X[i+9]
-	veor		q15,q12
-	vshr.u64	d24,d22,#14		@ from NEON_00_15
-	vadd.i64	q3,q14
-	vshr.u64	d25,d22,#18		@ from NEON_00_15
-	veor		q15,q13				@ sigma0(X[i+1])
-	vshr.u64	d26,d22,#41		@ from NEON_00_15
-	vadd.i64	q3,q15
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d22,#50
-	vsli.64		d25,d22,#46
-	vmov		d29,d22
-	vsli.64		d26,d22,#23
-#if 22<16 && defined(__ARMEL__)
-	vrev64.8	,
-#endif
-	veor		d25,d24
-	vbsl		d29,d23,d16		@ Ch(e,f,g)
-	vshr.u64	d24,d18,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d17
-	vshr.u64	d25,d18,#34
-	vsli.64		d24,d18,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d18,#39
-	vadd.i64	d28,d6
-	vsli.64		d25,d18,#30
-	veor		d30,d18,d19
-	vsli.64		d26,d18,#25
-	veor		d17,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d20,d19		@ Maj(a,b,c)
-	veor		d17,d26			@ Sigma0(a)
-	vadd.i64	d21,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d17,d30
-	vshr.u64	d24,d21,#14	@ 23
-#if 23<16
-	vld1.64		{d7},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d21,#18
-#if 23>0
-	 vadd.i64	d17,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d21,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d21,#50
-	vsli.64		d25,d21,#46
-	vmov		d29,d21
-	vsli.64		d26,d21,#23
-#if 23<16 && defined(__ARMEL__)
-	vrev64.8	,
-#endif
-	veor		d25,d24
-	vbsl		d29,d22,d23		@ Ch(e,f,g)
-	vshr.u64	d24,d17,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d16
-	vshr.u64	d25,d17,#34
-	vsli.64		d24,d17,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d17,#39
-	vadd.i64	d28,d7
-	vsli.64		d25,d17,#30
-	veor		d30,d17,d18
-	vsli.64		d26,d17,#25
-	veor		d16,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d19,d18		@ Maj(a,b,c)
-	veor		d16,d26			@ Sigma0(a)
-	vadd.i64	d20,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d16,d30
-	vshr.u64	q12,q3,#19
-	vshr.u64	q13,q3,#61
-	 vadd.i64	d16,d30			@ h+=Maj from the past
-	vshr.u64	q15,q3,#6
-	vsli.64		q12,q3,#45
-	vext.8		q14,q4,q5,#8	@ X[i+1]
-	vsli.64		q13,q3,#3
-	veor		q15,q12
-	vshr.u64	q12,q14,#1
-	veor		q15,q13				@ sigma1(X[i+14])
-	vshr.u64	q13,q14,#8
-	vadd.i64	q4,q15
-	vshr.u64	q15,q14,#7
-	vsli.64		q12,q14,#63
-	vsli.64		q13,q14,#56
-	vext.8		q14,q0,q1,#8	@ X[i+9]
-	veor		q15,q12
-	vshr.u64	d24,d20,#14		@ from NEON_00_15
-	vadd.i64	q4,q14
-	vshr.u64	d25,d20,#18		@ from NEON_00_15
-	veor		q15,q13				@ sigma0(X[i+1])
-	vshr.u64	d26,d20,#41		@ from NEON_00_15
-	vadd.i64	q4,q15
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d20,#50
-	vsli.64		d25,d20,#46
-	vmov		d29,d20
-	vsli.64		d26,d20,#23
-#if 24<16 && defined(__ARMEL__)
-	vrev64.8	,
-#endif
-	veor		d25,d24
-	vbsl		d29,d21,d22		@ Ch(e,f,g)
-	vshr.u64	d24,d16,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d23
-	vshr.u64	d25,d16,#34
-	vsli.64		d24,d16,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d16,#39
-	vadd.i64	d28,d8
-	vsli.64		d25,d16,#30
-	veor		d30,d16,d17
-	vsli.64		d26,d16,#25
-	veor		d23,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d18,d17		@ Maj(a,b,c)
-	veor		d23,d26			@ Sigma0(a)
-	vadd.i64	d19,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d23,d30
-	vshr.u64	d24,d19,#14	@ 25
-#if 25<16
-	vld1.64		{d9},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d19,#18
-#if 25>0
-	 vadd.i64	d23,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d19,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d19,#50
-	vsli.64		d25,d19,#46
-	vmov		d29,d19
-	vsli.64		d26,d19,#23
-#if 25<16 && defined(__ARMEL__)
-	vrev64.8	,
-#endif
-	veor		d25,d24
-	vbsl		d29,d20,d21		@ Ch(e,f,g)
-	vshr.u64	d24,d23,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d22
-	vshr.u64	d25,d23,#34
-	vsli.64		d24,d23,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d23,#39
-	vadd.i64	d28,d9
-	vsli.64		d25,d23,#30
-	veor		d30,d23,d16
-	vsli.64		d26,d23,#25
-	veor		d22,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d17,d16		@ Maj(a,b,c)
-	veor		d22,d26			@ Sigma0(a)
-	vadd.i64	d18,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d22,d30
-	vshr.u64	q12,q4,#19
-	vshr.u64	q13,q4,#61
-	 vadd.i64	d22,d30			@ h+=Maj from the past
-	vshr.u64	q15,q4,#6
-	vsli.64		q12,q4,#45
-	vext.8		q14,q5,q6,#8	@ X[i+1]
-	vsli.64		q13,q4,#3
-	veor		q15,q12
-	vshr.u64	q12,q14,#1
-	veor		q15,q13				@ sigma1(X[i+14])
-	vshr.u64	q13,q14,#8
-	vadd.i64	q5,q15
-	vshr.u64	q15,q14,#7
-	vsli.64		q12,q14,#63
-	vsli.64		q13,q14,#56
-	vext.8		q14,q1,q2,#8	@ X[i+9]
-	veor		q15,q12
-	vshr.u64	d24,d18,#14		@ from NEON_00_15
-	vadd.i64	q5,q14
-	vshr.u64	d25,d18,#18		@ from NEON_00_15
-	veor		q15,q13				@ sigma0(X[i+1])
-	vshr.u64	d26,d18,#41		@ from NEON_00_15
-	vadd.i64	q5,q15
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d18,#50
-	vsli.64		d25,d18,#46
-	vmov		d29,d18
-	vsli.64		d26,d18,#23
-#if 26<16 && defined(__ARMEL__)
-	vrev64.8	,
-#endif
-	veor		d25,d24
-	vbsl		d29,d19,d20		@ Ch(e,f,g)
-	vshr.u64	d24,d22,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d21
-	vshr.u64	d25,d22,#34
-	vsli.64		d24,d22,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d22,#39
-	vadd.i64	d28,d10
-	vsli.64		d25,d22,#30
-	veor		d30,d22,d23
-	vsli.64		d26,d22,#25
-	veor		d21,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d16,d23		@ Maj(a,b,c)
-	veor		d21,d26			@ Sigma0(a)
-	vadd.i64	d17,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d21,d30
-	vshr.u64	d24,d17,#14	@ 27
-#if 27<16
-	vld1.64		{d11},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d17,#18
-#if 27>0
-	 vadd.i64	d21,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d17,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d17,#50
-	vsli.64		d25,d17,#46
-	vmov		d29,d17
-	vsli.64		d26,d17,#23
-#if 27<16 && defined(__ARMEL__)
-	vrev64.8	,
-#endif
-	veor		d25,d24
-	vbsl		d29,d18,d19		@ Ch(e,f,g)
-	vshr.u64	d24,d21,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d20
-	vshr.u64	d25,d21,#34
-	vsli.64		d24,d21,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d21,#39
-	vadd.i64	d28,d11
-	vsli.64		d25,d21,#30
-	veor		d30,d21,d22
-	vsli.64		d26,d21,#25
-	veor		d20,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d23,d22		@ Maj(a,b,c)
-	veor		d20,d26			@ Sigma0(a)
-	vadd.i64	d16,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d20,d30
-	vshr.u64	q12,q5,#19
-	vshr.u64	q13,q5,#61
-	 vadd.i64	d20,d30			@ h+=Maj from the past
-	vshr.u64	q15,q5,#6
-	vsli.64		q12,q5,#45
-	vext.8		q14,q6,q7,#8	@ X[i+1]
-	vsli.64		q13,q5,#3
-	veor		q15,q12
-	vshr.u64	q12,q14,#1
-	veor		q15,q13				@ sigma1(X[i+14])
-	vshr.u64	q13,q14,#8
-	vadd.i64	q6,q15
-	vshr.u64	q15,q14,#7
-	vsli.64		q12,q14,#63
-	vsli.64		q13,q14,#56
-	vext.8		q14,q2,q3,#8	@ X[i+9]
-	veor		q15,q12
-	vshr.u64	d24,d16,#14		@ from NEON_00_15
-	vadd.i64	q6,q14
-	vshr.u64	d25,d16,#18		@ from NEON_00_15
-	veor		q15,q13				@ sigma0(X[i+1])
-	vshr.u64	d26,d16,#41		@ from NEON_00_15
-	vadd.i64	q6,q15
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d16,#50
-	vsli.64		d25,d16,#46
-	vmov		d29,d16
-	vsli.64		d26,d16,#23
-#if 28<16 && defined(__ARMEL__)
-	vrev64.8	,
-#endif
-	veor		d25,d24
-	vbsl		d29,d17,d18		@ Ch(e,f,g)
-	vshr.u64	d24,d20,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d19
-	vshr.u64	d25,d20,#34
-	vsli.64		d24,d20,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d20,#39
-	vadd.i64	d28,d12
-	vsli.64		d25,d20,#30
-	veor		d30,d20,d21
-	vsli.64		d26,d20,#25
-	veor		d19,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d22,d21		@ Maj(a,b,c)
-	veor		d19,d26			@ Sigma0(a)
-	vadd.i64	d23,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d19,d30
-	vshr.u64	d24,d23,#14	@ 29
-#if 29<16
-	vld1.64		{d13},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d23,#18
-#if 29>0
-	 vadd.i64	d19,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d23,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d23,#50
-	vsli.64		d25,d23,#46
-	vmov		d29,d23
-	vsli.64		d26,d23,#23
-#if 29<16 && defined(__ARMEL__)
-	vrev64.8	,
-#endif
-	veor		d25,d24
-	vbsl		d29,d16,d17		@ Ch(e,f,g)
-	vshr.u64	d24,d19,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d18
-	vshr.u64	d25,d19,#34
-	vsli.64		d24,d19,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d19,#39
-	vadd.i64	d28,d13
-	vsli.64		d25,d19,#30
-	veor		d30,d19,d20
-	vsli.64		d26,d19,#25
-	veor		d18,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d21,d20		@ Maj(a,b,c)
-	veor		d18,d26			@ Sigma0(a)
-	vadd.i64	d22,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d18,d30
-	vshr.u64	q12,q6,#19
-	vshr.u64	q13,q6,#61
-	 vadd.i64	d18,d30			@ h+=Maj from the past
-	vshr.u64	q15,q6,#6
-	vsli.64		q12,q6,#45
-	vext.8		q14,q7,q0,#8	@ X[i+1]
-	vsli.64		q13,q6,#3
-	veor		q15,q12
-	vshr.u64	q12,q14,#1
-	veor		q15,q13				@ sigma1(X[i+14])
-	vshr.u64	q13,q14,#8
-	vadd.i64	q7,q15
-	vshr.u64	q15,q14,#7
-	vsli.64		q12,q14,#63
-	vsli.64		q13,q14,#56
-	vext.8		q14,q3,q4,#8	@ X[i+9]
-	veor		q15,q12
-	vshr.u64	d24,d22,#14		@ from NEON_00_15
-	vadd.i64	q7,q14
-	vshr.u64	d25,d22,#18		@ from NEON_00_15
-	veor		q15,q13				@ sigma0(X[i+1])
-	vshr.u64	d26,d22,#41		@ from NEON_00_15
-	vadd.i64	q7,q15
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d22,#50
-	vsli.64		d25,d22,#46
-	vmov		d29,d22
-	vsli.64		d26,d22,#23
-#if 30<16 && defined(__ARMEL__)
-	vrev64.8	,
-#endif
-	veor		d25,d24
-	vbsl		d29,d23,d16		@ Ch(e,f,g)
-	vshr.u64	d24,d18,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d17
-	vshr.u64	d25,d18,#34
-	vsli.64		d24,d18,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d18,#39
-	vadd.i64	d28,d14
-	vsli.64		d25,d18,#30
-	veor		d30,d18,d19
-	vsli.64		d26,d18,#25
-	veor		d17,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d20,d19		@ Maj(a,b,c)
-	veor		d17,d26			@ Sigma0(a)
-	vadd.i64	d21,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d17,d30
-	vshr.u64	d24,d21,#14	@ 31
-#if 31<16
-	vld1.64		{d15},[r1]!	@ handles unaligned
-#endif
-	vshr.u64	d25,d21,#18
-#if 31>0
-	 vadd.i64	d17,d30			@ h+=Maj from the past
-#endif
-	vshr.u64	d26,d21,#41
-	vld1.64		{d28},[r3,:64]!	@ K[i++]
-	vsli.64		d24,d21,#50
-	vsli.64		d25,d21,#46
-	vmov		d29,d21
-	vsli.64		d26,d21,#23
-#if 31<16 && defined(__ARMEL__)
-	vrev64.8	,
-#endif
-	veor		d25,d24
-	vbsl		d29,d22,d23		@ Ch(e,f,g)
-	vshr.u64	d24,d17,#28
-	veor		d26,d25			@ Sigma1(e)
-	vadd.i64	d27,d29,d16
-	vshr.u64	d25,d17,#34
-	vsli.64		d24,d17,#36
-	vadd.i64	d27,d26
-	vshr.u64	d26,d17,#39
-	vadd.i64	d28,d15
-	vsli.64		d25,d17,#30
-	veor		d30,d17,d18
-	vsli.64		d26,d17,#25
-	veor		d16,d24,d25
-	vadd.i64	d27,d28
-	vbsl		d30,d19,d18		@ Maj(a,b,c)
-	veor		d16,d26			@ Sigma0(a)
-	vadd.i64	d20,d27
-	vadd.i64	d30,d27
-	@ vadd.i64	d16,d30
-	bne		.L16_79_neon
-
-	 vadd.i64	d16,d30		@ h+=Maj from the past
-	vldmia		r0,{d24-d31}	@ load context to temp
-	vadd.i64	q8,q12		@ vectorized accumulate
-	vadd.i64	q9,q13
-	vadd.i64	q10,q14
-	vadd.i64	q11,q15
-	vstmia		r0,{d16-d23}	@ save context
-	teq		r1,r2
-	sub		r3,#640	@ rewind K512
-	bne		.Loop_neon
-
-	VFP_ABI_POP
-	bx	lr				@ .word	0xe12fff1e
-.size	sha512_block_data_order_neon,.-sha512_block_data_order_neon
-#endif
-.asciz	"SHA512 block transform for ARMv4/NEON, CRYPTOGAMS by <appro@openssl.org>"
-.align	2
-#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
-.comm	OPENSSL_armcap_P,4,4
-#endif
diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h
index 413abfb42989..311e83038bdb 100644
--- a/arch/arm/include/asm/arch_gicv3.h
+++ b/arch/arm/include/asm/arch_gicv3.h
@@ -48,6 +48,7 @@ static inline u32 read_ ## a64(void)		\
 	return read_sysreg(a32); 		\
 }						\
 
+CPUIF_MAP(ICC_EOIR1, ICC_EOIR1_EL1)
 CPUIF_MAP(ICC_PMR, ICC_PMR_EL1)
 CPUIF_MAP(ICC_AP0R0, ICC_AP0R0_EL1)
 CPUIF_MAP(ICC_AP0R1, ICC_AP0R1_EL1)
@@ -63,12 +64,6 @@ CPUIF_MAP(ICC_AP1R3, ICC_AP1R3_EL1)
 
 /* Low-level accessors */
 
-static inline void gic_write_eoir(u32 irq)
-{
-	write_sysreg(irq, ICC_EOIR1);
-	isb();
-}
-
 static inline void gic_write_dir(u32 val)
 {
 	write_sysreg(val, ICC_DIR);
@@ -257,5 +252,10 @@ static inline void gic_arch_enable_irqs(void)
 	WARN_ON_ONCE(true);
 }
 
+static inline bool gic_has_relaxed_pmr_sync(void)
+{
+	return false;
+}
+
 #endif /* !__ASSEMBLY__ */
 #endif /* !__ASM_ARCH_GICV3_H */
diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h
index 99175812d903..bb129b6d2366 100644
--- a/arch/arm/include/asm/arch_timer.h
+++ b/arch/arm/include/asm/arch_timer.h
@@ -7,6 +7,7 @@
 #include <asm/hwcap.h>
 #include <linux/clocksource.h>
 #include <linux/init.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
 #include <linux/types.h>
 
 #include <clocksource/arm_arch_timer.h>
@@ -24,29 +25,35 @@ int arch_timer_arch_init(void);
  * the code. At least it does so with a recent GCC (4.6.3).
  */
 static __always_inline
-void arch_timer_reg_write_cp15(int access, enum arch_timer_reg reg, u32 val)
+void arch_timer_reg_write_cp15(int access, enum arch_timer_reg reg, u64 val)
 {
 	if (access == ARCH_TIMER_PHYS_ACCESS) {
 		switch (reg) {
 		case ARCH_TIMER_REG_CTRL:
-			asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val));
+			asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" ((u32)val));
+			isb();
 			break;
-		case ARCH_TIMER_REG_TVAL:
-			asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val));
+		case ARCH_TIMER_REG_CVAL:
+			asm volatile("mcrr p15, 2, %Q0, %R0, c14" : : "r" (val));
 			break;
+		default:
+			BUILD_BUG();
 		}
 	} else if (access == ARCH_TIMER_VIRT_ACCESS) {
 		switch (reg) {
 		case ARCH_TIMER_REG_CTRL:
-			asm volatile("mcr p15, 0, %0, c14, c3, 1" : : "r" (val));
+			asm volatile("mcr p15, 0, %0, c14, c3, 1" : : "r" ((u32)val));
+			isb();
 			break;
-		case ARCH_TIMER_REG_TVAL:
-			asm volatile("mcr p15, 0, %0, c14, c3, 0" : : "r" (val));
+		case ARCH_TIMER_REG_CVAL:
+			asm volatile("mcrr p15, 3, %Q0, %R0, c14" : : "r" (val));
 			break;
+		default:
+			BUILD_BUG();
 		}
+	} else {
+		BUILD_BUG();
 	}
-
-	isb();
 }
 
 static __always_inline
@@ -59,19 +66,19 @@ u32 arch_timer_reg_read_cp15(int access, enum arch_timer_reg reg)
 		case ARCH_TIMER_REG_CTRL:
 			asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val));
 			break;
-		case ARCH_TIMER_REG_TVAL:
-			asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val));
-			break;
+		default:
+			BUILD_BUG();
 		}
 	} else if (access == ARCH_TIMER_VIRT_ACCESS) {
 		switch (reg) {
 		case ARCH_TIMER_REG_CTRL:
 			asm volatile("mrc p15, 0, %0, c14, c3, 1" : "=r" (val));
 			break;
-		case ARCH_TIMER_REG_TVAL:
-			asm volatile("mrc p15, 0, %0, c14, c3, 0" : "=r" (val));
-			break;
+		default:
+			BUILD_BUG();
 		}
+	} else {
+		BUILD_BUG();
 	}
 
 	return val;
diff --git a/arch/arm/include/asm/archrandom.h b/arch/arm/include/asm/archrandom.h
index a8e84ca5c2ee..cc4714eb1a75 100644
--- a/arch/arm/include/asm/archrandom.h
+++ b/arch/arm/include/asm/archrandom.h
@@ -7,4 +7,6 @@ static inline bool __init smccc_probe_trng(void)
 	return false;
 }
 
+#include <asm-generic/archrandom.h>
+
 #endif /* _ASM_ARCHRANDOM_H */
diff --git a/arch/arm/include/asm/arm_pmuv3.h b/arch/arm/include/asm/arm_pmuv3.h
new file mode 100644
index 000000000000..78d3d4b82c6c
--- /dev/null
+++ b/arch/arm/include/asm/arm_pmuv3.h
@@ -0,0 +1,247 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#ifndef __ASM_PMUV3_H
+#define __ASM_PMUV3_H
+
+#include <asm/cp15.h>
+#include <asm/cputype.h>
+
+#define PMCCNTR			__ACCESS_CP15_64(0, c9)
+
+#define PMCR			__ACCESS_CP15(c9,  0, c12, 0)
+#define PMCNTENSET		__ACCESS_CP15(c9,  0, c12, 1)
+#define PMCNTENCLR		__ACCESS_CP15(c9,  0, c12, 2)
+#define PMOVSR			__ACCESS_CP15(c9,  0, c12, 3)
+#define PMSELR			__ACCESS_CP15(c9,  0, c12, 5)
+#define PMCEID0			__ACCESS_CP15(c9,  0, c12, 6)
+#define PMCEID1			__ACCESS_CP15(c9,  0, c12, 7)
+#define PMXEVTYPER		__ACCESS_CP15(c9,  0, c13, 1)
+#define PMXEVCNTR		__ACCESS_CP15(c9,  0, c13, 2)
+#define PMUSERENR		__ACCESS_CP15(c9,  0, c14, 0)
+#define PMINTENSET		__ACCESS_CP15(c9,  0, c14, 1)
+#define PMINTENCLR		__ACCESS_CP15(c9,  0, c14, 2)
+#define PMMIR			__ACCESS_CP15(c9,  0, c14, 6)
+#define PMCCFILTR		__ACCESS_CP15(c14, 0, c15, 7)
+
+#define PMEVCNTR0		__ACCESS_CP15(c14, 0, c8, 0)
+#define PMEVCNTR1		__ACCESS_CP15(c14, 0, c8, 1)
+#define PMEVCNTR2		__ACCESS_CP15(c14, 0, c8, 2)
+#define PMEVCNTR3		__ACCESS_CP15(c14, 0, c8, 3)
+#define PMEVCNTR4		__ACCESS_CP15(c14, 0, c8, 4)
+#define PMEVCNTR5		__ACCESS_CP15(c14, 0, c8, 5)
+#define PMEVCNTR6		__ACCESS_CP15(c14, 0, c8, 6)
+#define PMEVCNTR7		__ACCESS_CP15(c14, 0, c8, 7)
+#define PMEVCNTR8		__ACCESS_CP15(c14, 0, c9, 0)
+#define PMEVCNTR9		__ACCESS_CP15(c14, 0, c9, 1)
+#define PMEVCNTR10		__ACCESS_CP15(c14, 0, c9, 2)
+#define PMEVCNTR11		__ACCESS_CP15(c14, 0, c9, 3)
+#define PMEVCNTR12		__ACCESS_CP15(c14, 0, c9, 4)
+#define PMEVCNTR13		__ACCESS_CP15(c14, 0, c9, 5)
+#define PMEVCNTR14		__ACCESS_CP15(c14, 0, c9, 6)
+#define PMEVCNTR15		__ACCESS_CP15(c14, 0, c9, 7)
+#define PMEVCNTR16		__ACCESS_CP15(c14, 0, c10, 0)
+#define PMEVCNTR17		__ACCESS_CP15(c14, 0, c10, 1)
+#define PMEVCNTR18		__ACCESS_CP15(c14, 0, c10, 2)
+#define PMEVCNTR19		__ACCESS_CP15(c14, 0, c10, 3)
+#define PMEVCNTR20		__ACCESS_CP15(c14, 0, c10, 4)
+#define PMEVCNTR21		__ACCESS_CP15(c14, 0, c10, 5)
+#define PMEVCNTR22		__ACCESS_CP15(c14, 0, c10, 6)
+#define PMEVCNTR23		__ACCESS_CP15(c14, 0, c10, 7)
+#define PMEVCNTR24		__ACCESS_CP15(c14, 0, c11, 0)
+#define PMEVCNTR25		__ACCESS_CP15(c14, 0, c11, 1)
+#define PMEVCNTR26		__ACCESS_CP15(c14, 0, c11, 2)
+#define PMEVCNTR27		__ACCESS_CP15(c14, 0, c11, 3)
+#define PMEVCNTR28		__ACCESS_CP15(c14, 0, c11, 4)
+#define PMEVCNTR29		__ACCESS_CP15(c14, 0, c11, 5)
+#define PMEVCNTR30		__ACCESS_CP15(c14, 0, c11, 6)
+
+#define PMEVTYPER0		__ACCESS_CP15(c14, 0, c12, 0)
+#define PMEVTYPER1		__ACCESS_CP15(c14, 0, c12, 1)
+#define PMEVTYPER2		__ACCESS_CP15(c14, 0, c12, 2)
+#define PMEVTYPER3		__ACCESS_CP15(c14, 0, c12, 3)
+#define PMEVTYPER4		__ACCESS_CP15(c14, 0, c12, 4)
+#define PMEVTYPER5		__ACCESS_CP15(c14, 0, c12, 5)
+#define PMEVTYPER6		__ACCESS_CP15(c14, 0, c12, 6)
+#define PMEVTYPER7		__ACCESS_CP15(c14, 0, c12, 7)
+#define PMEVTYPER8		__ACCESS_CP15(c14, 0, c13, 0)
+#define PMEVTYPER9		__ACCESS_CP15(c14, 0, c13, 1)
+#define PMEVTYPER10		__ACCESS_CP15(c14, 0, c13, 2)
+#define PMEVTYPER11		__ACCESS_CP15(c14, 0, c13, 3)
+#define PMEVTYPER12		__ACCESS_CP15(c14, 0, c13, 4)
+#define PMEVTYPER13		__ACCESS_CP15(c14, 0, c13, 5)
+#define PMEVTYPER14		__ACCESS_CP15(c14, 0, c13, 6)
+#define PMEVTYPER15		__ACCESS_CP15(c14, 0, c13, 7)
+#define PMEVTYPER16		__ACCESS_CP15(c14, 0, c14, 0)
+#define PMEVTYPER17		__ACCESS_CP15(c14, 0, c14, 1)
+#define PMEVTYPER18		__ACCESS_CP15(c14, 0, c14, 2)
+#define PMEVTYPER19		__ACCESS_CP15(c14, 0, c14, 3)
+#define PMEVTYPER20		__ACCESS_CP15(c14, 0, c14, 4)
+#define PMEVTYPER21		__ACCESS_CP15(c14, 0, c14, 5)
+#define PMEVTYPER22		__ACCESS_CP15(c14, 0, c14, 6)
+#define PMEVTYPER23		__ACCESS_CP15(c14, 0, c14, 7)
+#define PMEVTYPER24		__ACCESS_CP15(c14, 0, c15, 0)
+#define PMEVTYPER25		__ACCESS_CP15(c14, 0, c15, 1)
+#define PMEVTYPER26		__ACCESS_CP15(c14, 0, c15, 2)
+#define PMEVTYPER27		__ACCESS_CP15(c14, 0, c15, 3)
+#define PMEVTYPER28		__ACCESS_CP15(c14, 0, c15, 4)
+#define PMEVTYPER29		__ACCESS_CP15(c14, 0, c15, 5)
+#define PMEVTYPER30		__ACCESS_CP15(c14, 0, c15, 6)
+
+#define RETURN_READ_PMEVCNTRN(n) \
+	return read_sysreg(PMEVCNTR##n)
+static unsigned long read_pmevcntrn(int n)
+{
+	PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN);
+	return 0;
+}
+
+#define WRITE_PMEVCNTRN(n) \
+	write_sysreg(val, PMEVCNTR##n)
+static void write_pmevcntrn(int n, unsigned long val)
+{
+	PMEVN_SWITCH(n, WRITE_PMEVCNTRN);
+}
+
+#define WRITE_PMEVTYPERN(n) \
+	write_sysreg(val, PMEVTYPER##n)
+static void write_pmevtypern(int n, unsigned long val)
+{
+	PMEVN_SWITCH(n, WRITE_PMEVTYPERN);
+}
+
+static inline unsigned long read_pmmir(void)
+{
+	return read_sysreg(PMMIR);
+}
+
+static inline u32 read_pmuver(void)
+{
+	/* PMUVers is not a signed field */
+	u32 dfr0 = read_cpuid_ext(CPUID_EXT_DFR0);
+
+	return (dfr0 >> 24) & 0xf;
+}
+
+static inline void write_pmcr(u32 val)
+{
+	write_sysreg(val, PMCR);
+}
+
+static inline u32 read_pmcr(void)
+{
+	return read_sysreg(PMCR);
+}
+
+static inline void write_pmselr(u32 val)
+{
+	write_sysreg(val, PMSELR);
+}
+
+static inline void write_pmccntr(u64 val)
+{
+	write_sysreg(val, PMCCNTR);
+}
+
+static inline u64 read_pmccntr(void)
+{
+	return read_sysreg(PMCCNTR);
+}
+
+static inline void write_pmxevcntr(u32 val)
+{
+	write_sysreg(val, PMXEVCNTR);
+}
+
+static inline u32 read_pmxevcntr(void)
+{
+	return read_sysreg(PMXEVCNTR);
+}
+
+static inline void write_pmxevtyper(u32 val)
+{
+	write_sysreg(val, PMXEVTYPER);
+}
+
+static inline void write_pmcntenset(u32 val)
+{
+	write_sysreg(val, PMCNTENSET);
+}
+
+static inline void write_pmcntenclr(u32 val)
+{
+	write_sysreg(val, PMCNTENCLR);
+}
+
+static inline void write_pmintenset(u32 val)
+{
+	write_sysreg(val, PMINTENSET);
+}
+
+static inline void write_pmintenclr(u32 val)
+{
+	write_sysreg(val, PMINTENCLR);
+}
+
+static inline void write_pmccfiltr(u32 val)
+{
+	write_sysreg(val, PMCCFILTR);
+}
+
+static inline void write_pmovsclr(u32 val)
+{
+	write_sysreg(val, PMOVSR);
+}
+
+static inline u32 read_pmovsclr(void)
+{
+	return read_sysreg(PMOVSR);
+}
+
+static inline void write_pmuserenr(u32 val)
+{
+	write_sysreg(val, PMUSERENR);
+}
+
+static inline u32 read_pmceid0(void)
+{
+	return read_sysreg(PMCEID0);
+}
+
+static inline u32 read_pmceid1(void)
+{
+	return read_sysreg(PMCEID1);
+}
+
+static inline void kvm_set_pmu_events(u32 set, struct perf_event_attr *attr) {}
+static inline void kvm_clr_pmu_events(u32 clr) {}
+static inline bool kvm_pmu_counter_deferred(struct perf_event_attr *attr)
+{
+	return false;
+}
+
+/* PMU Version in DFR Register */
+#define ARMV8_PMU_DFR_VER_NI        0
+#define ARMV8_PMU_DFR_VER_V3P4      0x5
+#define ARMV8_PMU_DFR_VER_V3P5      0x6
+#define ARMV8_PMU_DFR_VER_IMP_DEF   0xF
+
+static inline bool pmuv3_implemented(int pmuver)
+{
+	return !(pmuver == ARMV8_PMU_DFR_VER_IMP_DEF ||
+		 pmuver == ARMV8_PMU_DFR_VER_NI);
+}
+
+static inline bool is_pmuv3p4(int pmuver)
+{
+	return pmuver >= ARMV8_PMU_DFR_VER_V3P4;
+}
+
+static inline bool is_pmuv3p5(int pmuver)
+{
+	return pmuver >= ARMV8_PMU_DFR_VER_V3P5;
+}
+
+#endif
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index e2b1fd558bf3..505a306e0271 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -86,6 +86,10 @@
 
 #define IMM12_MASK 0xfff
 
+/* the frame pointer used for stack unwinding */
+ARM(	fpreg	.req	r11	)
+THUMB(	fpreg	.req	r7	)
+
 /*
  * Enable and disable interrupts
  */
@@ -107,6 +111,16 @@
 	.endm
 #endif
 
+#if __LINUX_ARM_ARCH__ < 7
+	.macro	dsb, args
+	mcr	p15, 0, r0, c7, c10, 4
+	.endm
+
+	.macro	isb, args
+	mcr	p15, 0, r0, c7, c5, 4
+	.endm
+#endif
+
 	.macro asm_trace_hardirqs_off, save=1
 #if defined(CONFIG_TRACE_IRQFLAGS)
 	.if \save
@@ -203,10 +217,8 @@
  * Get current thread_info.
  */
 	.macro	get_thread_info, rd
- ARM(	mov	\rd, sp, lsr #THREAD_SIZE_ORDER + PAGE_SHIFT	)
- THUMB(	mov	\rd, sp			)
- THUMB(	lsr	\rd, \rd, #THREAD_SIZE_ORDER + PAGE_SHIFT	)
-	mov	\rd, \rd, lsl #THREAD_SIZE_ORDER + PAGE_SHIFT
+	/* thread_info is the first member of struct task_struct */
+	get_current \rd
 	.endm
 
 /*
@@ -224,20 +236,12 @@
 	sub	\tmp, \tmp, #1			@ decrement it
 	str	\tmp, [\ti, #TI_PREEMPT]
 	.endm
-
-	.macro	dec_preempt_count_ti, ti, tmp
-	get_thread_info \ti
-	dec_preempt_count \ti, \tmp
-	.endm
 #else
 	.macro	inc_preempt_count, ti, tmp
 	.endm
 
 	.macro	dec_preempt_count, ti, tmp
 	.endm
-
-	.macro	dec_preempt_count_ti, ti, tmp
-	.endm
 #endif
 
 #define USERL(l, x...)				\
@@ -259,6 +263,7 @@
  */
 #define ALT_UP(instr...)					\
 	.pushsection ".alt.smp.init", "a"			;\
+	.align	2						;\
 	.long	9998b - .					;\
 9997:	instr							;\
 	.if . - 9997b == 2					;\
@@ -270,6 +275,7 @@
 	.popsection
 #define ALT_UP_B(label)					\
 	.pushsection ".alt.smp.init", "a"			;\
+	.align	2						;\
 	.long	9998b - .					;\
 	W(b)	. + (label - 9998b)					;\
 	.popsection
@@ -279,6 +285,80 @@
 #define ALT_UP_B(label) b label
 #endif
 
+	/*
+	 * this_cpu_offset - load the per-CPU offset of this CPU into
+	 * 		     register 'rd'
+	 */
+	.macro		this_cpu_offset, rd:req
+#ifdef CONFIG_SMP
+ALT_SMP(mrc		p15, 0, \rd, c13, c0, 4)
+#ifdef CONFIG_CPU_V6
+ALT_UP_B(.L1_\@)
+.L0_\@:
+	.subsection	1
+.L1_\@: ldr_va		\rd, __per_cpu_offset
+	b		.L0_\@
+	.previous
+#endif
+#else
+	mov		\rd, #0
+#endif
+	.endm
+
+	/*
+	 * set_current - store the task pointer of this CPU's current task
+	 */
+	.macro		set_current, rn:req, tmp:req
+#if defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
+9998:	mcr		p15, 0, \rn, c13, c0, 3		@ set TPIDRURO register
+#ifdef CONFIG_CPU_V6
+ALT_UP_B(.L0_\@)
+	.subsection	1
+.L0_\@: str_va		\rn, __current, \tmp
+	b		.L1_\@
+	.previous
+.L1_\@:
+#endif
+#else
+	str_va		\rn, __current, \tmp
+#endif
+	.endm
+
+	/*
+	 * get_current - load the task pointer of this CPU's current task
+	 */
+	.macro		get_current, rd:req
+#if defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
+9998:	mrc		p15, 0, \rd, c13, c0, 3		@ get TPIDRURO register
+#ifdef CONFIG_CPU_V6
+ALT_UP_B(.L0_\@)
+	.subsection	1
+.L0_\@: ldr_va		\rd, __current
+	b		.L1_\@
+	.previous
+.L1_\@:
+#endif
+#else
+	ldr_va		\rd, __current
+#endif
+	.endm
+
+	/*
+	 * reload_current - reload the task pointer of this CPU's current task
+	 *		    into the TLS register
+	 */
+	.macro		reload_current, t1:req, t2:req
+#if defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
+#ifdef CONFIG_CPU_V6
+ALT_SMP(nop)
+ALT_UP_B(.L0_\@)
+#endif
+	ldr_this_cpu	\t1, __entry_task, \t1, \t2
+	mcr		p15, 0, \t1, c13, c0, 3		@ store in TPIDRURO
+.L0_\@:
+#endif
+	.endm
+
 /*
  * Instruction barrier
  */
@@ -535,12 +615,12 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	/*
 	 * mov_l - move a constant value or [relocated] address into a register
 	 */
-	.macro		mov_l, dst:req, imm:req
+	.macro		mov_l, dst:req, imm:req, cond
 	.if		__LINUX_ARM_ARCH__ < 7
-	ldr		\dst, =\imm
+	ldr\cond	\dst, =\imm
 	.else
-	movw		\dst, #:lower16:\imm
-	movt		\dst, #:upper16:\imm
+	movw\cond	\dst, #:lower16:\imm
+	movt\cond	\dst, #:upper16:\imm
 	.endif
 	.endm
 
@@ -578,6 +658,84 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	__adldst_l	str, \src, \sym, \tmp, \cond
 	.endm
 
+	.macro		__ldst_va, op, reg, tmp, sym, cond, offset
+#if __LINUX_ARM_ARCH__ >= 7 || \
+    !defined(CONFIG_ARM_HAS_GROUP_RELOCS) || \
+    (defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
+	mov_l		\tmp, \sym, \cond
+#else
+	/*
+	 * Avoid a literal load, by emitting a sequence of ADD/LDR instructions
+	 * with the appropriate relocations. The combined sequence has a range
+	 * of -/+ 256 MiB, which should be sufficient for the core kernel and
+	 * for modules loaded into the module region.
+	 */
+	.globl		\sym
+	.reloc		.L0_\@, R_ARM_ALU_PC_G0_NC, \sym
+	.reloc		.L1_\@, R_ARM_ALU_PC_G1_NC, \sym
+	.reloc		.L2_\@, R_ARM_LDR_PC_G2, \sym
+.L0_\@: sub\cond	\tmp, pc, #8 - \offset
+.L1_\@: sub\cond	\tmp, \tmp, #4 - \offset
+.L2_\@:
+#endif
+	\op\cond	\reg, [\tmp, #\offset]
+	.endm
+
+	/*
+	 * ldr_va - load a 32-bit word from the virtual address of \sym
+	 */
+	.macro		ldr_va, rd:req, sym:req, cond, tmp, offset=0
+	.ifnb		\tmp
+	__ldst_va	ldr, \rd, \tmp, \sym, \cond, \offset
+	.else
+	__ldst_va	ldr, \rd, \rd, \sym, \cond, \offset
+	.endif
+	.endm
+
+	/*
+	 * str_va - store a 32-bit word to the virtual address of \sym
+	 */
+	.macro		str_va, rn:req, sym:req, tmp:req, cond
+	__ldst_va	str, \rn, \tmp, \sym, \cond, 0
+	.endm
+
+	/*
+	 * ldr_this_cpu_armv6 - Load a 32-bit word from the per-CPU variable 'sym',
+	 *			without using a temp register. Supported in ARM mode
+	 *			only.
+	 */
+	.macro		ldr_this_cpu_armv6, rd:req, sym:req
+	this_cpu_offset	\rd
+	.globl		\sym
+	.reloc		.L0_\@, R_ARM_ALU_PC_G0_NC, \sym
+	.reloc		.L1_\@, R_ARM_ALU_PC_G1_NC, \sym
+	.reloc		.L2_\@, R_ARM_LDR_PC_G2, \sym
+	add		\rd, \rd, pc
+.L0_\@: sub		\rd, \rd, #4
+.L1_\@: sub		\rd, \rd, #0
+.L2_\@: ldr		\rd, [\rd, #4]
+	.endm
+
+	/*
+	 * ldr_this_cpu - Load a 32-bit word from the per-CPU variable 'sym'
+	 *		  into register 'rd', which may be the stack pointer,
+	 *		  using 't1' and 't2' as general temp registers. These
+	 *		  are permitted to overlap with 'rd' if != sp
+	 */
+	.macro		ldr_this_cpu, rd:req, sym:req, t1:req, t2:req
+#ifndef CONFIG_SMP
+	ldr_va		\rd, \sym, tmp=\t1
+#elif __LINUX_ARM_ARCH__ >= 7 || \
+      !defined(CONFIG_ARM_HAS_GROUP_RELOCS) || \
+      (defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
+	this_cpu_offset	\t1
+	mov_l		\t2, \sym
+	ldr		\rd, [\t1, \t2]
+#else
+	ldr_this_cpu_armv6 \rd, \sym
+#endif
+	.endm
+
 	/*
 	 * rev_l - byte-swap a 32-bit value
 	 *
@@ -595,4 +753,25 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	.endif
 	.endm
 
+	.if		__LINUX_ARM_ARCH__ < 6
+	.set		.Lrev_l_uses_tmp, 1
+	.else
+	.set		.Lrev_l_uses_tmp, 0
+	.endif
+
+	/*
+	 * bl_r - branch and link to register
+	 *
+	 * @dst: target to branch to
+	 * @c: conditional opcode suffix
+	 */
+	.macro		bl_r, dst:req, c
+	.if		__LINUX_ARM_ARCH__ < 6
+	mov\c		lr, pc
+	mov\c		pc, \dst
+	.else
+	blx\c		\dst
+	.endif
+	.endm
+
 #endif /* __ASM_ASSEMBLER_H__ */
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 455eb19a5ac1..db8512d9a918 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -22,8 +22,8 @@
  * strex/ldrex monitor on some implementations. The reason we can use it for
  * atomic_set() is the clrex or dummy strex done on every exception return.
  */
-#define atomic_read(v)	READ_ONCE((v)->counter)
-#define atomic_set(v,i)	WRITE_ONCE(((v)->counter), (i))
+#define arch_atomic_read(v)	READ_ONCE((v)->counter)
+#define arch_atomic_set(v,i)	WRITE_ONCE(((v)->counter), (i))
 
 #if __LINUX_ARM_ARCH__ >= 6
 
@@ -34,7 +34,7 @@
  */
 
 #define ATOMIC_OP(op, c_op, asm_op)					\
-static inline void atomic_##op(int i, atomic_t *v)			\
+static inline void arch_atomic_##op(int i, atomic_t *v)			\
 {									\
 	unsigned long tmp;						\
 	int result;							\
@@ -52,7 +52,7 @@ static inline void atomic_##op(int i, atomic_t *v)			\
 }									\
 
 #define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
-static inline int atomic_##op##_return_relaxed(int i, atomic_t *v)	\
+static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v)	\
 {									\
 	unsigned long tmp;						\
 	int result;							\
@@ -73,7 +73,7 @@ static inline int atomic_##op##_return_relaxed(int i, atomic_t *v)	\
 }
 
 #define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
-static inline int atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
+static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
 {									\
 	unsigned long tmp;						\
 	int result, val;						\
@@ -93,17 +93,17 @@ static inline int atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
 	return result;							\
 }
 
-#define atomic_add_return_relaxed	atomic_add_return_relaxed
-#define atomic_sub_return_relaxed	atomic_sub_return_relaxed
-#define atomic_fetch_add_relaxed	atomic_fetch_add_relaxed
-#define atomic_fetch_sub_relaxed	atomic_fetch_sub_relaxed
+#define arch_atomic_add_return_relaxed		arch_atomic_add_return_relaxed
+#define arch_atomic_sub_return_relaxed		arch_atomic_sub_return_relaxed
+#define arch_atomic_fetch_add_relaxed		arch_atomic_fetch_add_relaxed
+#define arch_atomic_fetch_sub_relaxed		arch_atomic_fetch_sub_relaxed
 
-#define atomic_fetch_and_relaxed	atomic_fetch_and_relaxed
-#define atomic_fetch_andnot_relaxed	atomic_fetch_andnot_relaxed
-#define atomic_fetch_or_relaxed		atomic_fetch_or_relaxed
-#define atomic_fetch_xor_relaxed	atomic_fetch_xor_relaxed
+#define arch_atomic_fetch_and_relaxed		arch_atomic_fetch_and_relaxed
+#define arch_atomic_fetch_andnot_relaxed	arch_atomic_fetch_andnot_relaxed
+#define arch_atomic_fetch_or_relaxed		arch_atomic_fetch_or_relaxed
+#define arch_atomic_fetch_xor_relaxed		arch_atomic_fetch_xor_relaxed
 
-static inline int atomic_cmpxchg_relaxed(atomic_t *ptr, int old, int new)
+static inline int arch_atomic_cmpxchg_relaxed(atomic_t *ptr, int old, int new)
 {
 	int oldval;
 	unsigned long res;
@@ -123,9 +123,9 @@ static inline int atomic_cmpxchg_relaxed(atomic_t *ptr, int old, int new)
 
 	return oldval;
 }
-#define atomic_cmpxchg_relaxed		atomic_cmpxchg_relaxed
+#define arch_atomic_cmpxchg_relaxed		arch_atomic_cmpxchg_relaxed
 
-static inline int atomic_fetch_add_unless(atomic_t *v, int a, int u)
+static inline int arch_atomic_fetch_add_unless(atomic_t *v, int a, int u)
 {
 	int oldval, newval;
 	unsigned long tmp;
@@ -151,7 +151,7 @@ static inline int atomic_fetch_add_unless(atomic_t *v, int a, int u)
 
 	return oldval;
 }
-#define atomic_fetch_add_unless		atomic_fetch_add_unless
+#define arch_atomic_fetch_add_unless		arch_atomic_fetch_add_unless
 
 #else /* ARM_ARCH_6 */
 
@@ -160,7 +160,7 @@ static inline int atomic_fetch_add_unless(atomic_t *v, int a, int u)
 #endif
 
 #define ATOMIC_OP(op, c_op, asm_op)					\
-static inline void atomic_##op(int i, atomic_t *v)			\
+static inline void arch_atomic_##op(int i, atomic_t *v)			\
 {									\
 	unsigned long flags;						\
 									\
@@ -170,7 +170,7 @@ static inline void atomic_##op(int i, atomic_t *v)			\
 }									\
 
 #define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
-static inline int atomic_##op##_return(int i, atomic_t *v)		\
+static inline int arch_atomic_##op##_return(int i, atomic_t *v)		\
 {									\
 	unsigned long flags;						\
 	int val;							\
@@ -184,7 +184,7 @@ static inline int atomic_##op##_return(int i, atomic_t *v)		\
 }
 
 #define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
-static inline int atomic_fetch_##op(int i, atomic_t *v)			\
+static inline int arch_atomic_fetch_##op(int i, atomic_t *v)		\
 {									\
 	unsigned long flags;						\
 	int val;							\
@@ -197,7 +197,7 @@ static inline int atomic_fetch_##op(int i, atomic_t *v)			\
 	return val;							\
 }
 
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+static inline int arch_atomic_cmpxchg(atomic_t *v, int old, int new)
 {
 	int ret;
 	unsigned long flags;
@@ -211,7 +211,7 @@ static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
 	return ret;
 }
 
-#define atomic_fetch_andnot		atomic_fetch_andnot
+#define arch_atomic_fetch_andnot		arch_atomic_fetch_andnot
 
 #endif /* __LINUX_ARM_ARCH__ */
 
@@ -223,7 +223,7 @@ static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
 ATOMIC_OPS(add, +=, add)
 ATOMIC_OPS(sub, -=, sub)
 
-#define atomic_andnot atomic_andnot
+#define arch_atomic_andnot arch_atomic_andnot
 
 #undef ATOMIC_OPS
 #define ATOMIC_OPS(op, c_op, asm_op)					\
@@ -240,7 +240,7 @@ ATOMIC_OPS(xor, ^=, eor)
 #undef ATOMIC_OP_RETURN
 #undef ATOMIC_OP
 
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define arch_atomic_xchg(v, new) (arch_xchg(&((v)->counter), new))
 
 #ifndef CONFIG_GENERIC_ATOMIC64
 typedef struct {
@@ -250,7 +250,7 @@ typedef struct {
 #define ATOMIC64_INIT(i) { (i) }
 
 #ifdef CONFIG_ARM_LPAE
-static inline s64 atomic64_read(const atomic64_t *v)
+static inline s64 arch_atomic64_read(const atomic64_t *v)
 {
 	s64 result;
 
@@ -263,7 +263,7 @@ static inline s64 atomic64_read(const atomic64_t *v)
 	return result;
 }
 
-static inline void atomic64_set(atomic64_t *v, s64 i)
+static inline void arch_atomic64_set(atomic64_t *v, s64 i)
 {
 	__asm__ __volatile__("@ atomic64_set\n"
 "	strd	%2, %H2, [%1]"
@@ -272,7 +272,7 @@ static inline void atomic64_set(atomic64_t *v, s64 i)
 	);
 }
 #else
-static inline s64 atomic64_read(const atomic64_t *v)
+static inline s64 arch_atomic64_read(const atomic64_t *v)
 {
 	s64 result;
 
@@ -285,7 +285,7 @@ static inline s64 atomic64_read(const atomic64_t *v)
 	return result;
 }
 
-static inline void atomic64_set(atomic64_t *v, s64 i)
+static inline void arch_atomic64_set(atomic64_t *v, s64 i)
 {
 	s64 tmp;
 
@@ -302,7 +302,7 @@ static inline void atomic64_set(atomic64_t *v, s64 i)
 #endif
 
 #define ATOMIC64_OP(op, op1, op2)					\
-static inline void atomic64_##op(s64 i, atomic64_t *v)			\
+static inline void arch_atomic64_##op(s64 i, atomic64_t *v)		\
 {									\
 	s64 result;							\
 	unsigned long tmp;						\
@@ -322,7 +322,7 @@ static inline void atomic64_##op(s64 i, atomic64_t *v)			\
 
 #define ATOMIC64_OP_RETURN(op, op1, op2)				\
 static inline s64							\
-atomic64_##op##_return_relaxed(s64 i, atomic64_t *v)			\
+arch_atomic64_##op##_return_relaxed(s64 i, atomic64_t *v)		\
 {									\
 	s64 result;							\
 	unsigned long tmp;						\
@@ -345,7 +345,7 @@ atomic64_##op##_return_relaxed(s64 i, atomic64_t *v)			\
 
 #define ATOMIC64_FETCH_OP(op, op1, op2)					\
 static inline s64							\
-atomic64_fetch_##op##_relaxed(s64 i, atomic64_t *v)			\
+arch_atomic64_fetch_##op##_relaxed(s64 i, atomic64_t *v)		\
 {									\
 	s64 result, val;						\
 	unsigned long tmp;						\
@@ -374,34 +374,34 @@ atomic64_fetch_##op##_relaxed(s64 i, atomic64_t *v)			\
 ATOMIC64_OPS(add, adds, adc)
 ATOMIC64_OPS(sub, subs, sbc)
 
-#define atomic64_add_return_relaxed	atomic64_add_return_relaxed
-#define atomic64_sub_return_relaxed	atomic64_sub_return_relaxed
-#define atomic64_fetch_add_relaxed	atomic64_fetch_add_relaxed
-#define atomic64_fetch_sub_relaxed	atomic64_fetch_sub_relaxed
+#define arch_atomic64_add_return_relaxed	arch_atomic64_add_return_relaxed
+#define arch_atomic64_sub_return_relaxed	arch_atomic64_sub_return_relaxed
+#define arch_atomic64_fetch_add_relaxed		arch_atomic64_fetch_add_relaxed
+#define arch_atomic64_fetch_sub_relaxed		arch_atomic64_fetch_sub_relaxed
 
 #undef ATOMIC64_OPS
 #define ATOMIC64_OPS(op, op1, op2)					\
 	ATOMIC64_OP(op, op1, op2)					\
 	ATOMIC64_FETCH_OP(op, op1, op2)
 
-#define atomic64_andnot atomic64_andnot
+#define arch_atomic64_andnot arch_atomic64_andnot
 
 ATOMIC64_OPS(and, and, and)
 ATOMIC64_OPS(andnot, bic, bic)
 ATOMIC64_OPS(or,  orr, orr)
 ATOMIC64_OPS(xor, eor, eor)
 
-#define atomic64_fetch_and_relaxed	atomic64_fetch_and_relaxed
-#define atomic64_fetch_andnot_relaxed	atomic64_fetch_andnot_relaxed
-#define atomic64_fetch_or_relaxed	atomic64_fetch_or_relaxed
-#define atomic64_fetch_xor_relaxed	atomic64_fetch_xor_relaxed
+#define arch_atomic64_fetch_and_relaxed		arch_atomic64_fetch_and_relaxed
+#define arch_atomic64_fetch_andnot_relaxed	arch_atomic64_fetch_andnot_relaxed
+#define arch_atomic64_fetch_or_relaxed		arch_atomic64_fetch_or_relaxed
+#define arch_atomic64_fetch_xor_relaxed		arch_atomic64_fetch_xor_relaxed
 
 #undef ATOMIC64_OPS
 #undef ATOMIC64_FETCH_OP
 #undef ATOMIC64_OP_RETURN
 #undef ATOMIC64_OP
 
-static inline s64 atomic64_cmpxchg_relaxed(atomic64_t *ptr, s64 old, s64 new)
+static inline s64 arch_atomic64_cmpxchg_relaxed(atomic64_t *ptr, s64 old, s64 new)
 {
 	s64 oldval;
 	unsigned long res;
@@ -422,9 +422,9 @@ static inline s64 atomic64_cmpxchg_relaxed(atomic64_t *ptr, s64 old, s64 new)
 
 	return oldval;
 }
-#define atomic64_cmpxchg_relaxed	atomic64_cmpxchg_relaxed
+#define arch_atomic64_cmpxchg_relaxed	arch_atomic64_cmpxchg_relaxed
 
-static inline s64 atomic64_xchg_relaxed(atomic64_t *ptr, s64 new)
+static inline s64 arch_atomic64_xchg_relaxed(atomic64_t *ptr, s64 new)
 {
 	s64 result;
 	unsigned long tmp;
@@ -442,9 +442,9 @@ static inline s64 atomic64_xchg_relaxed(atomic64_t *ptr, s64 new)
 
 	return result;
 }
-#define atomic64_xchg_relaxed		atomic64_xchg_relaxed
+#define arch_atomic64_xchg_relaxed		arch_atomic64_xchg_relaxed
 
-static inline s64 atomic64_dec_if_positive(atomic64_t *v)
+static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 {
 	s64 result;
 	unsigned long tmp;
@@ -470,9 +470,9 @@ static inline s64 atomic64_dec_if_positive(atomic64_t *v)
 
 	return result;
 }
-#define atomic64_dec_if_positive atomic64_dec_if_positive
+#define arch_atomic64_dec_if_positive arch_atomic64_dec_if_positive
 
-static inline s64 atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
+static inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
 {
 	s64 oldval, newval;
 	unsigned long tmp;
@@ -500,7 +500,7 @@ static inline s64 atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
 
 	return oldval;
 }
-#define atomic64_fetch_add_unless atomic64_fetch_add_unless
+#define arch_atomic64_fetch_add_unless arch_atomic64_fetch_add_unless
 
 #endif /* !CONFIG_GENERIC_ATOMIC64 */
 #endif
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
index c92e42a5c8f7..714440fa2fc6 100644
--- a/arch/arm/include/asm/bitops.h
+++ b/arch/arm/include/asm/bitops.h
@@ -160,18 +160,20 @@ extern int _test_and_change_bit(int nr, volatile unsigned long * p);
 /*
  * Little endian assembly bitops.  nr = 0 -> byte 0 bit 0.
  */
-extern int _find_first_zero_bit_le(const unsigned long *p, unsigned size);
-extern int _find_next_zero_bit_le(const unsigned long *p, int size, int offset);
-extern int _find_first_bit_le(const unsigned long *p, unsigned size);
-extern int _find_next_bit_le(const unsigned long *p, int size, int offset);
+unsigned long _find_first_zero_bit_le(const unsigned long *p, unsigned long size);
+unsigned long _find_next_zero_bit_le(const unsigned long *p,
+				     unsigned long size, unsigned long offset);
+unsigned long _find_first_bit_le(const unsigned long *p, unsigned long size);
+unsigned long _find_next_bit_le(const unsigned long *p, unsigned long size, unsigned long offset);
 
 /*
  * Big endian assembly bitops.  nr = 0 -> byte 3 bit 0.
  */
-extern int _find_first_zero_bit_be(const unsigned long *p, unsigned size);
-extern int _find_next_zero_bit_be(const unsigned long *p, int size, int offset);
-extern int _find_first_bit_be(const unsigned long *p, unsigned size);
-extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
+unsigned long _find_first_zero_bit_be(const unsigned long *p, unsigned long size);
+unsigned long _find_next_zero_bit_be(const unsigned long *p,
+				     unsigned long size, unsigned long offset);
+unsigned long _find_first_bit_be(const unsigned long *p, unsigned long size);
+unsigned long _find_next_bit_be(const unsigned long *p, unsigned long size, unsigned long offset);
 
 #ifndef CONFIG_SMP
 /*
@@ -264,7 +266,6 @@ static inline int find_next_bit_le(const void *p, int size, int offset)
 
 #endif
 
-#include <asm-generic/bitops/find.h>
 #include <asm-generic/bitops/le.h>
 
 /*
diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h
index 673c7dd75ab9..ba8d9d7d242b 100644
--- a/arch/arm/include/asm/bug.h
+++ b/arch/arm/include/asm/bug.h
@@ -88,5 +88,6 @@ extern asmlinkage void c_backtrace(unsigned long fp, int pmode,
 struct mm_struct;
 void show_pte(const char *lvl, struct mm_struct *mm, unsigned long addr);
 extern void __show_regs(struct pt_regs *);
+extern void __show_regs_alloc_free(struct pt_regs *regs);
 
 #endif
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 2e24e765e6d3..a094f964c869 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -291,6 +291,7 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page *);
 
+#define ARCH_IMPLEMENTS_FLUSH_KERNEL_VMAP_RANGE 1
 static inline void flush_kernel_vmap_range(void *addr, int size)
 {
 	if ((cache_is_vivt() || cache_is_vipt_aliasing()))
@@ -312,9 +313,6 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
 		__flush_anon_page(vma, page, vmaddr);
 }
 
-#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
-extern void flush_kernel_dcache_page(struct page *);
-
 #define flush_dcache_mmap_lock(mapping)		xa_lock_irq(&mapping->i_pages)
 #define flush_dcache_mmap_unlock(mapping)	xa_unlock_irq(&mapping->i_pages)
 
@@ -447,15 +445,10 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size)
  *   however some exceptions may exist.  Caveat emptor.
  *
  * - The clobber list is dictated by the call to v7_flush_dcache_*.
- *   fp is preserved to the stack explicitly prior disabling the cache
- *   since adding it to the clobber list is incompatible with having
- *   CONFIG_FRAME_POINTER=y.  ip is saved as well if ever r12-clobbering
- *   trampoline are inserted by the linker and to keep sp 64-bit aligned.
  */
 #define v7_exit_coherency_flush(level) \
 	asm volatile( \
 	".arch	armv7-a \n\t" \
-	"stmfd	sp!, {fp, ip} \n\t" \
 	"mrc	p15, 0, r0, c1, c0, 0	@ get SCTLR \n\t" \
 	"bic	r0, r0, #"__stringify(CR_C)" \n\t" \
 	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR \n\t" \
@@ -465,10 +458,9 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size)
 	"bic	r0, r0, #(1 << 6)	@ disable local coherency \n\t" \
 	"mcr	p15, 0, r0, c1, c0, 1	@ set ACTLR \n\t" \
 	"isb	\n\t" \
-	"dsb	\n\t" \
-	"ldmfd	sp!, {fp, ip}" \
-	: : : "r0","r1","r2","r3","r4","r5","r6","r7", \
-	      "r9","r10","lr","memory" )
+	"dsb" \
+	: : : "r0","r1","r2","r3","r4","r5","r6", \
+	      "r9","r10","ip","lr","memory" )
 
 void flush_uprobe_xol_access(struct page *page, unsigned long uaddr,
 			     void *kaddr, unsigned long len);
diff --git a/arch/arm/include/asm/checksum.h b/arch/arm/include/asm/checksum.h
index f0f54aef3724..d8a13959bff0 100644
--- a/arch/arm/include/asm/checksum.h
+++ b/arch/arm/include/asm/checksum.h
@@ -11,6 +11,7 @@
 #define __ASM_ARM_CHECKSUM_H
 
 #include <linux/in6.h>
+#include <linux/uaccess.h>
 
 /*
  * computes the checksum of a memory block at buff, length len,
diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h
index 8b701f8e175c..44667bdb4707 100644
--- a/arch/arm/include/asm/cmpxchg.h
+++ b/arch/arm/include/asm/cmpxchg.h
@@ -25,7 +25,8 @@
 #define swp_is_buggy
 #endif
 
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+static inline unsigned long
+__arch_xchg(unsigned long x, volatile void *ptr, int size)
 {
 	extern void __bad_xchg(volatile void *, int);
 	unsigned long ret;
@@ -114,9 +115,9 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 	return ret;
 }
 
-#define xchg_relaxed(ptr, x) ({						\
-	(__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr),		\
-				   sizeof(*(ptr)));			\
+#define arch_xchg_relaxed(ptr, x) ({					\
+	(__typeof__(*(ptr)))__arch_xchg((unsigned long)(x), (ptr),	\
+					sizeof(*(ptr)));		\
 })
 
 #include <asm-generic/cmpxchg-local.h>
@@ -128,20 +129,20 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 #error "SMP is not supported on this platform"
 #endif
 
-#define xchg xchg_relaxed
+#define arch_xchg arch_xchg_relaxed
 
 /*
  * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
  * them available.
  */
-#define cmpxchg_local(ptr, o, n) ({					\
-	(__typeof(*ptr))__cmpxchg_local_generic((ptr),			\
+#define arch_cmpxchg_local(ptr, o, n) ({				\
+	(__typeof(*ptr))__generic_cmpxchg_local((ptr),			\
 					        (unsigned long)(o),	\
 					        (unsigned long)(n),	\
 					        sizeof(*(ptr)));	\
 })
 
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+#define arch_cmpxchg64_local(ptr, o, n) __generic_cmpxchg64_local((ptr), (o), (n))
 
 #include <asm-generic/cmpxchg.h>
 
@@ -207,7 +208,7 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
 	return oldval;
 }
 
-#define cmpxchg_relaxed(ptr,o,n) ({					\
+#define arch_cmpxchg_relaxed(ptr,o,n) ({				\
 	(__typeof__(*(ptr)))__cmpxchg((ptr),				\
 				      (unsigned long)(o),		\
 				      (unsigned long)(n),		\
@@ -224,7 +225,7 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
 #ifdef CONFIG_CPU_V6	/* min ARCH == ARMv6 */
 	case 1:
 	case 2:
-		ret = __cmpxchg_local_generic(ptr, old, new, size);
+		ret = __generic_cmpxchg_local(ptr, old, new, size);
 		break;
 #endif
 	default:
@@ -234,7 +235,7 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
 	return ret;
 }
 
-#define cmpxchg_local(ptr, o, n) ({					\
+#define arch_cmpxchg_local(ptr, o, n) ({				\
 	(__typeof(*ptr))__cmpxchg_local((ptr),				\
 				        (unsigned long)(o),		\
 				        (unsigned long)(n),		\
@@ -266,13 +267,13 @@ static inline unsigned long long __cmpxchg64(unsigned long long *ptr,
 	return oldval;
 }
 
-#define cmpxchg64_relaxed(ptr, o, n) ({					\
+#define arch_cmpxchg64_relaxed(ptr, o, n) ({				\
 	(__typeof__(*(ptr)))__cmpxchg64((ptr),				\
 					(unsigned long long)(o),	\
 					(unsigned long long)(n));	\
 })
 
-#define cmpxchg64_local(ptr, o, n) cmpxchg64_relaxed((ptr), (o), (n))
+#define arch_cmpxchg64_local(ptr, o, n) arch_cmpxchg64_relaxed((ptr), (o), (n))
 
 #endif	/* __LINUX_ARM_ARCH__ >= 6 */
 
diff --git a/arch/arm/include/asm/cpuidle.h b/arch/arm/include/asm/cpuidle.h
index 0d67ed682e07..397be5ed30e7 100644
--- a/arch/arm/include/asm/cpuidle.h
+++ b/arch/arm/include/asm/cpuidle.h
@@ -7,9 +7,11 @@
 #ifdef CONFIG_CPU_IDLE
 extern int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
 		struct cpuidle_driver *drv, int index);
+#define __cpuidle_method_section __used __section("__cpuidle_method_of_table")
 #else
 static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
 		struct cpuidle_driver *drv, int index) { return -ENODEV; }
+#define __cpuidle_method_section __maybe_unused /* drop silently */
 #endif
 
 /* Common ARM WFI state */
@@ -42,11 +44,15 @@ struct of_cpuidle_method {
 
 #define CPUIDLE_METHOD_OF_DECLARE(name, _method, _ops)			\
 	static const struct of_cpuidle_method __cpuidle_method_of_table_##name \
-	__used __section("__cpuidle_method_of_table")			\
-	= { .method = _method, .ops = _ops }
+	__cpuidle_method_section = { .method = _method, .ops = _ops }
 
 extern int arm_cpuidle_suspend(int index);
 
 extern int arm_cpuidle_init(int cpu);
 
+struct arm_cpuidle_irq_context { };
+
+#define arm_cpuidle_save_irq_context(c)		(void)c
+#define arm_cpuidle_restore_irq_context(c)	(void)c
+
 #endif
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 775cac3c02bb..0163c3e78a67 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -25,6 +25,8 @@
 #define CPUID_EXT_ISAR3	0x6c
 #define CPUID_EXT_ISAR4	0x70
 #define CPUID_EXT_ISAR5	0x74
+#define CPUID_EXT_ISAR6	0x7c
+#define CPUID_EXT_PFR2	0x90
 #else
 #define CPUID_EXT_PFR0	"c1, 0"
 #define CPUID_EXT_PFR1	"c1, 1"
@@ -40,6 +42,8 @@
 #define CPUID_EXT_ISAR3	"c2, 3"
 #define CPUID_EXT_ISAR4	"c2, 4"
 #define CPUID_EXT_ISAR5	"c2, 5"
+#define CPUID_EXT_ISAR6	"c2, 7"
+#define CPUID_EXT_PFR2	"c3, 4"
 #endif
 
 #define MPIDR_SMP_BITMASK (0x3 << 30)
diff --git a/arch/arm/include/asm/current.h b/arch/arm/include/asm/current.h
new file mode 100644
index 000000000000..1e1178bf176d
--- /dev/null
+++ b/arch/arm/include/asm/current.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2021 Keith Packard <keithp@keithp.com>
+ * Copyright (c) 2021 Google, LLC <ardb@kernel.org>
+ */
+
+#ifndef _ASM_ARM_CURRENT_H
+#define _ASM_ARM_CURRENT_H
+
+#ifndef __ASSEMBLY__
+#include <asm/insn.h>
+
+struct task_struct;
+
+extern struct task_struct *__current;
+
+static __always_inline __attribute_const__ struct task_struct *get_current(void)
+{
+	struct task_struct *cur;
+
+#if __has_builtin(__builtin_thread_pointer) && \
+    defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) && \
+    !(defined(CONFIG_THUMB2_KERNEL) && \
+      defined(CONFIG_CC_IS_CLANG) && CONFIG_CLANG_VERSION < 130001)
+	/*
+	 * Use the __builtin helper when available - this results in better
+	 * code, especially when using GCC in combination with the per-task
+	 * stack protector, as the compiler will recognize that it needs to
+	 * load the TLS register only once in every function.
+	 *
+	 * Clang < 13.0.1 gets this wrong for Thumb2 builds:
+	 * https://github.com/ClangBuiltLinux/linux/issues/1485
+	 */
+	cur = __builtin_thread_pointer();
+#elif defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
+	asm("0:	mrc p15, 0, %0, c13, c0, 3			\n\t"
+#ifdef CONFIG_CPU_V6
+	    "1:							\n\t"
+	    "	.subsection 1					\n\t"
+#if defined(CONFIG_ARM_HAS_GROUP_RELOCS) && \
+    !(defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
+	    "2: " LOAD_SYM_ARMV6(%0, __current) "		\n\t"
+	    "	b	1b					\n\t"
+#else
+	    "2:	ldr	%0, 3f					\n\t"
+	    "	ldr	%0, [%0]				\n\t"
+	    "	b	1b					\n\t"
+	    "3:	.long	__current				\n\t"
+#endif
+	    "	.previous					\n\t"
+	    "	.pushsection \".alt.smp.init\", \"a\"		\n\t"
+	    "	.long	0b - .					\n\t"
+	    "	b	. + (2b - 0b)				\n\t"
+	    "	.popsection					\n\t"
+#endif
+	    : "=r"(cur));
+#elif __LINUX_ARM_ARCH__>= 7 || \
+      !defined(CONFIG_ARM_HAS_GROUP_RELOCS) || \
+      (defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
+	cur = __current;
+#else
+	asm(LOAD_SYM_ARMV6(%0, __current) : "=r"(cur));
+#endif
+	return cur;
+}
+
+#define current get_current()
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_ARM_CURRENT_H */
diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h
index be666f58bf7a..c6beb1708c64 100644
--- a/arch/arm/include/asm/device.h
+++ b/arch/arm/include/asm/device.h
@@ -6,13 +6,9 @@
 #define ASMARM_DEVICE_H
 
 struct dev_archdata {
-#ifdef CONFIG_DMABOUNCE
-	struct dmabounce_device_info *dmabounce;
-#endif
 #ifdef CONFIG_ARM_DMA_USE_IOMMU
 	struct dma_iommu_mapping	*mapping;
 #endif
-	unsigned int dma_coherent:1;
 	unsigned int dma_ops_setup:1;
 };
 
diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h
index 595e538f5bfb..4b69cf850451 100644
--- a/arch/arm/include/asm/div64.h
+++ b/arch/arm/include/asm/div64.h
@@ -52,17 +52,6 @@ static inline uint32_t __div64_32(uint64_t *n, uint32_t base)
 
 #else
 
-/*
- * gcc versions earlier than 4.0 are simply too problematic for the
- * __div64_const32() code in asm-generic/div64.h. First there is
- * gcc PR 15089 that tend to trig on more complex constructs, spurious
- * .global __udivsi3 are inserted even if none of those symbols are
- * referenced in the generated code, and those gcc versions are not able
- * to do constant propagation on long long values anyway.
- */
-
-#define __div64_const32_is_OK (__GNUC__ >= 4)
-
 static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias)
 {
 	unsigned long long res;
diff --git a/arch/arm/include/asm/dma-direct.h b/arch/arm/include/asm/dma-direct.h
deleted file mode 100644
index 77fcb7ee5ec9..000000000000
--- a/arch/arm/include/asm/dma-direct.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ASM_ARM_DMA_DIRECT_H
-#define ASM_ARM_DMA_DIRECT_H 1
-
-#include <asm/memory.h>
-
-/*
- * dma_to_pfn/pfn_to_dma/virt_to_dma are architecture private
- * functions used internally by the DMA-mapping API to provide DMA
- * addresses. They must not be used by drivers.
- */
-static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
-{
-	if (dev && dev->dma_range_map)
-		pfn = PFN_DOWN(translate_phys_to_dma(dev, PFN_PHYS(pfn)));
-	return (dma_addr_t)__pfn_to_bus(pfn);
-}
-
-static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr)
-{
-	unsigned long pfn = __bus_to_pfn(addr);
-
-	if (dev && dev->dma_range_map)
-		pfn = PFN_DOWN(translate_dma_to_phys(dev, PFN_PHYS(pfn)));
-	return pfn;
-}
-
-static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
-{
-	if (dev)
-		return pfn_to_dma(dev, virt_to_pfn(addr));
-
-	return (dma_addr_t)__virt_to_bus((unsigned long)(addr));
-}
-
-static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
-	unsigned int offset = paddr & ~PAGE_MASK;
-	return pfn_to_dma(dev, __phys_to_pfn(paddr)) + offset;
-}
-
-static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr)
-{
-	unsigned int offset = dev_addr & ~PAGE_MASK;
-	return __pfn_to_phys(dma_to_pfn(dev, dev_addr)) + offset;
-}
-
-#endif /* ASM_ARM_DMA_DIRECT_H */
diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h
index fe9ef6f79e9c..82ec1ccf1fee 100644
--- a/arch/arm/include/asm/dma-iommu.h
+++ b/arch/arm/include/asm/dma-iommu.h
@@ -24,7 +24,7 @@ struct dma_iommu_mapping {
 };
 
 struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size);
+arm_iommu_create_mapping(const struct bus_type *bus, dma_addr_t base, u64 size);
 
 void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping);
 
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
deleted file mode 100644
index 77082246a5e1..000000000000
--- a/arch/arm/include/asm/dma-mapping.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef ASMARM_DMA_MAPPING_H
-#define ASMARM_DMA_MAPPING_H
-
-#ifdef __KERNEL__
-
-#include <linux/mm_types.h>
-#include <linux/scatterlist.h>
-
-#include <xen/xen.h>
-#include <asm/xen/hypervisor.h>
-
-extern const struct dma_map_ops arm_dma_ops;
-extern const struct dma_map_ops arm_coherent_dma_ops;
-
-static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
-{
-	if (IS_ENABLED(CONFIG_MMU) && !IS_ENABLED(CONFIG_ARM_LPAE))
-		return &arm_dma_ops;
-	return NULL;
-}
-
-/**
- * arm_dma_alloc - allocate consistent memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: required memory size
- * @handle: bus-specific DMA address
- * @attrs: optinal attributes that specific mapping properties
- *
- * Allocate some memory for a device for performing DMA.  This function
- * allocates pages, and will return the CPU-viewed address, and sets @handle
- * to be the device-viewed address.
- */
-extern void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
-			   gfp_t gfp, unsigned long attrs);
-
-/**
- * arm_dma_free - free memory allocated by arm_dma_alloc
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: size of memory originally requested in dma_alloc_coherent
- * @cpu_addr: CPU-view address returned from dma_alloc_coherent
- * @handle: device-view address returned from dma_alloc_coherent
- * @attrs: optinal attributes that specific mapping properties
- *
- * Free (and unmap) a DMA buffer previously allocated by
- * arm_dma_alloc().
- *
- * References to memory and mappings associated with cpu_addr/handle
- * during and after this call executing are illegal.
- */
-extern void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
-			 dma_addr_t handle, unsigned long attrs);
-
-/**
- * arm_dma_mmap - map a coherent DMA allocation into user space
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @vma: vm_area_struct describing requested user mapping
- * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent
- * @handle: device-view address returned from dma_alloc_coherent
- * @size: size of memory originally requested in dma_alloc_coherent
- * @attrs: optinal attributes that specific mapping properties
- *
- * Map a coherent DMA buffer previously allocated by dma_alloc_coherent
- * into user space.  The coherent DMA buffer must not be freed by the
- * driver until the user space mapping has been released.
- */
-extern int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
-			void *cpu_addr, dma_addr_t dma_addr, size_t size,
-			unsigned long attrs);
-
-/*
- * For SA-1111, IXP425, and ADI systems  the dma-mapping functions are "magic"
- * and utilize bounce buffers as needed to work around limited DMA windows.
- *
- * On the SA-1111, a bug limits DMA to only certain regions of RAM.
- * On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
- * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM)
- *
- * The following are helper functions used by the dmabounce subystem
- *
- */
-
-/**
- * dmabounce_register_dev
- *
- * @dev: valid struct device pointer
- * @small_buf_size: size of buffers to use with small buffer pool
- * @large_buf_size: size of buffers to use with large buffer pool (can be 0)
- * @needs_bounce_fn: called to determine whether buffer needs bouncing
- *
- * This function should be called by low-level platform code to register
- * a device as requireing DMA buffer bouncing. The function will allocate
- * appropriate DMA pools for the device.
- */
-extern int dmabounce_register_dev(struct device *, unsigned long,
-		unsigned long, int (*)(struct device *, dma_addr_t, size_t));
-
-/**
- * dmabounce_unregister_dev
- *
- * @dev: valid struct device pointer
- *
- * This function should be called by low-level platform code when device
- * that was previously registered with dmabounce_register_dev is removed
- * from the system.
- *
- */
-extern void dmabounce_unregister_dev(struct device *);
-
-
-
-/*
- * The scatter list versions of the above methods.
- */
-extern int arm_dma_map_sg(struct device *, struct scatterlist *, int,
-		enum dma_data_direction, unsigned long attrs);
-extern void arm_dma_unmap_sg(struct device *, struct scatterlist *, int,
-		enum dma_data_direction, unsigned long attrs);
-extern void arm_dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int,
-		enum dma_data_direction);
-extern void arm_dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
-		enum dma_data_direction);
-extern int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt,
-		void *cpu_addr, dma_addr_t dma_addr, size_t size,
-		unsigned long attrs);
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index a81dda65c576..c6aded1b069c 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -10,7 +10,7 @@
 #else
 #define MAX_DMA_ADDRESS	({ \
 	extern phys_addr_t arm_dma_zone_size; \
-	arm_dma_zone_size && arm_dma_zone_size < (0x10000000 - PAGE_OFFSET) ? \
+	arm_dma_zone_size && arm_dma_zone_size < (0x100000000ULL - PAGE_OFFSET) ? \
 		(PAGE_OFFSET + arm_dma_zone_size) : 0xffffffffUL; })
 #endif
 
@@ -106,7 +106,7 @@ extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg);
  */
 extern void __set_dma_addr(unsigned int chan, void *addr);
 #define set_dma_addr(chan, addr)				\
-	__set_dma_addr(chan, (void *)__bus_to_virt(addr))
+	__set_dma_addr(chan, (void *)isa_bus_to_virt(addr))
 
 /* Set the DMA byte count for this channel
  *
@@ -143,10 +143,4 @@ extern int  get_dma_residue(unsigned int chan);
 
 #endif /* CONFIG_ISA_DMA_API */
 
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy    (0)
-#endif
-
 #endif /* __ASM_ARM_DMA_H */
diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h
index f1d0a7807cd0..41536feb4392 100644
--- a/arch/arm/include/asm/domain.h
+++ b/arch/arm/include/asm/domain.h
@@ -112,19 +112,6 @@ static __always_inline void set_domain(unsigned int val)
 }
 #endif
 
-#ifdef CONFIG_CPU_USE_DOMAINS
-#define modify_domain(dom,type)					\
-	do {							\
-		unsigned int domain = get_domain();		\
-		domain &= ~domain_mask(dom);			\
-		domain = domain | domain_val(dom, type);	\
-		set_domain(domain);				\
-	} while (0)
-
-#else
-static inline void modify_domain(unsigned dom, unsigned type)	{ }
-#endif
-
 /*
  * Generate the T (user) versions of the LDR/STR and related
  * instructions (inline assembly)
diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h
index 9de7ab2ce05d..78282ced5038 100644
--- a/arch/arm/include/asm/efi.h
+++ b/arch/arm/include/asm/efi.h
@@ -17,20 +17,14 @@
 
 #ifdef CONFIG_EFI
 void efi_init(void);
+void arm_efi_init(void);
 
 int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
-int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md);
+int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md, bool);
 
 #define arch_efi_call_virt_setup()	efi_virtmap_load()
 #define arch_efi_call_virt_teardown()	efi_virtmap_unload()
 
-#define arch_efi_call_virt(p, f, args...)				\
-({									\
-	efi_##f##_t *__f;						\
-	__f = p->f;							\
-	__f(args);							\
-})
-
 #define ARCH_EFI_IRQ_FLAGS_MASK \
 	(PSR_J_BIT | PSR_E_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT | \
 	 PSR_T_BIT | MODE_MASK)
@@ -44,18 +38,11 @@ void efi_virtmap_load(void);
 void efi_virtmap_unload(void);
 
 #else
-#define efi_init()
+#define arm_efi_init()
 #endif /* CONFIG_EFI */
 
 /* arch specific definitions used by the stub code */
 
-struct screen_info *alloc_screen_info(void);
-void free_screen_info(struct screen_info *si);
-
-static inline void efifb_setup_from_dmi(struct screen_info *si, const char *opt)
-{
-}
-
 /*
  * A reasonable upper bound for the uncompressed kernel size is 32 MBytes,
  * so we will reserve that amount of memory. We have no easy way to tell what
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index b8102a6ddf16..d68101655b74 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -61,6 +61,9 @@ typedef struct user_fp elf_fpregset_t;
 #define R_ARM_MOVT_ABS		44
 #define R_ARM_MOVW_PREL_NC	45
 #define R_ARM_MOVT_PREL		46
+#define R_ARM_ALU_PC_G0_NC	57
+#define R_ARM_ALU_PC_G1_NC	59
+#define R_ARM_LDR_PC_G2		63
 
 #define R_ARM_THM_CALL		10
 #define R_ARM_THM_JUMP24	30
diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S
deleted file mode 100644
index dfc6bfa43012..000000000000
--- a/arch/arm/include/asm/entry-macro-multi.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/assembler.h>
-
-/*
- * Interrupt handling.  Preserves r7, r8, r9
- */
-	.macro	arch_irq_handler_default
-	get_irqnr_preamble r6, lr
-1:	get_irqnr_and_base r0, r2, r6, lr
-	movne	r1, sp
-	@
-	@ routine called with r0 = irq number, r1 = struct pt_regs *
-	@
-	badrne	lr, 1b
-	bne	asm_do_IRQ
-
-#ifdef CONFIG_SMP
-	/*
-	 * XXX
-	 *
-	 * this macro assumes that irqstat (r2) and base (r6) are
-	 * preserved from get_irqnr_and_base above
-	 */
-	ALT_SMP(test_for_ipi r0, r2, r6, lr)
-	ALT_UP_B(9997f)
-	movne	r1, sp
-	badrne	lr, 1b
-	bne	do_IPI
-#endif
-9997:
-	.endm
-
-	.macro	arch_irq_handler, symbol_name
-	.align	5
-	.global \symbol_name
-\symbol_name:
-	mov	r8, lr
-	arch_irq_handler_default
-	ret	r8
-	.endm
diff --git a/arch/arm/include/asm/fpstate.h b/arch/arm/include/asm/fpstate.h
index 9e2fe9ced084..e29d9c7a5238 100644
--- a/arch/arm/include/asm/fpstate.h
+++ b/arch/arm/include/asm/fpstate.h
@@ -46,9 +46,6 @@ union vfp_state {
 	struct vfp_hard_struct	hard;
 };
 
-extern void vfp_flush_thread(union vfp_state *);
-extern void vfp_release_thread(union vfp_state *);
-
 #define FP_HARD_SIZE 35
 
 struct fp_hard_struct {
@@ -77,14 +74,6 @@ union fp_state {
 
 #define FP_SIZE (sizeof(union fp_state) / sizeof(int))
 
-struct crunch_state {
-	unsigned int	mvdx[16][2];
-	unsigned int	mvax[4][3];
-	unsigned int	dspsc[2];
-};
-
-#define CRUNCH_SIZE	sizeof(struct crunch_state)
-
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 48ec1d0337da..7e9251ca29fe 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -2,6 +2,8 @@
 #ifndef _ASM_ARM_FTRACE
 #define _ASM_ARM_FTRACE
 
+#define HAVE_FUNCTION_GRAPH_FP_TEST
+
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
 #define ARCH_SUPPORTS_FTRACE_OPS 1
 #endif
@@ -15,6 +17,9 @@ extern void __gnu_mcount_nc(void);
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 struct dyn_arch_ftrace {
+#ifdef CONFIG_ARM_MODULE_PLTS
+	struct module *mod;
+#endif
 };
 
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
@@ -45,7 +50,7 @@ void *return_address(unsigned int);
 
 static inline void *return_address(unsigned int level)
 {
-	return NULL;
+       return NULL;
 }
 
 #endif
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
deleted file mode 100644
index c50e383358c4..000000000000
--- a/arch/arm/include/asm/gpio.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ARCH_ARM_GPIO_H
-#define _ARCH_ARM_GPIO_H
-
-#if CONFIG_ARCH_NR_GPIO > 0
-#define ARCH_NR_GPIOS CONFIG_ARCH_NR_GPIO
-#endif
-
-/* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */
-#include <asm-generic/gpio.h>
-
-/* The trivial gpiolib dispatchers */
-#define gpio_get_value  __gpio_get_value
-#define gpio_set_value  __gpio_set_value
-#define gpio_cansleep   __gpio_cansleep
-
-/*
- * Provide a default gpio_to_irq() which should satisfy every case.
- * However, some platforms want to do this differently, so allow them
- * to override it.
- */
-#ifndef gpio_to_irq
-#define gpio_to_irq	__gpio_to_irq
-#endif
-
-#endif /* _ARCH_ARM_GPIO_H */
diff --git a/arch/arm/include/asm/hardware/cache-aurora-l2.h b/arch/arm/include/asm/hardware/cache-aurora-l2.h
index 39769ffa0051..9694808ee97c 100644
--- a/arch/arm/include/asm/hardware/cache-aurora-l2.h
+++ b/arch/arm/include/asm/hardware/cache-aurora-l2.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * AURORA shared L2 cache controller support
  *
@@ -5,10 +6,6 @@
  *
  * Yehuda Yitschak <yehuday@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __ASM_ARM_HARDWARE_AURORA_L2_H
diff --git a/arch/arm/include/asm/hardware/cache-feroceon-l2.h b/arch/arm/include/asm/hardware/cache-feroceon-l2.h
index 12e1588dc4f1..eb2e7b7f70a8 100644
--- a/arch/arm/include/asm/hardware/cache-feroceon-l2.h
+++ b/arch/arm/include/asm/hardware/cache-feroceon-l2.h
@@ -1,13 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * arch/arm/include/asm/hardware/cache-feroceon-l2.h
  *
  * Copyright (C) 2008 Marvell Semiconductor
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 extern void __init feroceon_l2_init(int l2_wt_override);
 extern int __init feroceon_of_init(void);
-
diff --git a/arch/arm/include/asm/hardware/cache-tauros2.h b/arch/arm/include/asm/hardware/cache-tauros2.h
index 295e2e40151b..4e493facaa31 100644
--- a/arch/arm/include/asm/hardware/cache-tauros2.h
+++ b/arch/arm/include/asm/hardware/cache-tauros2.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * arch/arm/include/asm/hardware/cache-tauros2.h
  *
  * Copyright (C) 2008 Marvell Semiconductor
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #define CACHE_TAUROS2_PREFETCH_ON	(1 << 0)
diff --git a/arch/arm/include/asm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h
index 3f18a56a025d..894f2a635cbb 100644
--- a/arch/arm/include/asm/hardware/dec21285.h
+++ b/arch/arm/include/asm/hardware/dec21285.h
@@ -22,6 +22,13 @@
 #define DC21285_IO(x)		(x)
 #endif
 
+/*
+ * The footbridge is programmed to expose the system RAM at 0xe0000000.
+ * The requirement is that the RAM isn't placed at bus address 0, which
+ * would clash with VGA cards.
+ */
+#define BUS_OFFSET 0xe0000000
+
 #define CSR_PCICMD		DC21285_IO(0x0004)
 #define CSR_CLASSREV		DC21285_IO(0x0008)
 #define CSR_PCICACHELINESIZE	DC21285_IO(0x000c)
@@ -81,19 +88,6 @@
 #define SA110_CNTL_XCSDIR(x)		((x)<<28)
 #define SA110_CNTL_PCICFN		(1 << 31)
 
-/*
- * footbridge_cfn_mode() is used when we want
- * to check whether we are the central function
- */
-#define __footbridge_cfn_mode() (*CSR_SA110_CNTL & SA110_CNTL_PCICFN)
-#if defined(CONFIG_FOOTBRIDGE_HOST) && defined(CONFIG_FOOTBRIDGE_ADDIN)
-#define footbridge_cfn_mode() __footbridge_cfn_mode()
-#elif defined(CONFIG_FOOTBRIDGE_HOST)
-#define footbridge_cfn_mode() (1)
-#else
-#define footbridge_cfn_mode() (0)
-#endif
-
 #define CSR_PCIADDR_EXTN	DC21285_IO(0x0140)
 #define CSR_PREFETCHMEMRANGE	DC21285_IO(0x0144)
 #define CSR_XBUS_CYCLE		DC21285_IO(0x0148)
diff --git a/arch/arm/include/asm/hardware/entry-macro-iomd.S b/arch/arm/include/asm/hardware/entry-macro-iomd.S
deleted file mode 100644
index f7692731e514..000000000000
--- a/arch/arm/include/asm/hardware/entry-macro-iomd.S
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/entry-macro-iomd.S
- *
- * Low-level IRQ helper macros for IOC/IOMD based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/* IOC / IOMD based hardware */
-#include <asm/hardware/iomd.h>
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldrb	\irqstat, [\base, #IOMD_IRQREQB]	@ get high priority first
-		ldr	\tmp, =irq_prio_h
-		teq	\irqstat, #0
-#ifdef IOMD_BASE
-		ldrbeq	\irqstat, [\base, #IOMD_DMAREQ]	@ get dma
-		addeq	\tmp, \tmp, #256		@ irq_prio_h table size
-		teqeq	\irqstat, #0
-		bne	2406f
-#endif
-		ldrbeq	\irqstat, [\base, #IOMD_IRQREQA]	@ get low priority
-		addeq	\tmp, \tmp, #256		@ irq_prio_d table size
-		teqeq	\irqstat, #0
-#ifdef IOMD_IRQREQC
-		ldrbeq	\irqstat, [\base, #IOMD_IRQREQC]
-		addeq	\tmp, \tmp, #256		@ irq_prio_l table size
-		teqeq	\irqstat, #0
-#endif
-#ifdef IOMD_IRQREQD
-		ldrbeq	\irqstat, [\base, #IOMD_IRQREQD]
-		addeq	\tmp, \tmp, #256		@ irq_prio_lc table size
-		teqeq	\irqstat, #0
-#endif
-2406:		ldrbne	\irqnr, [\tmp, \irqstat]	@ get IRQ number
-		.endm
-
-/*
- * Interrupt table (incorporates priority).  Please note that we
- * rely on the order of these tables (see above code).
- */
-		.align	5
-irq_prio_h:	.byte	 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-#ifdef IOMD_BASE
-irq_prio_d:	.byte	 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-#endif
-irq_prio_l:	.byte	 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-#ifdef IOMD_IRQREQC
-irq_prio_lc:	.byte	24,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
-		.byte	28,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
-		.byte	30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-#endif
-#ifdef IOMD_IRQREQD
-irq_prio_ld:	.byte	40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
-		.byte	44,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
-		.byte	46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-#endif
-
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 2e70db6f22ea..d8c6f8a99dfa 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -13,8 +13,6 @@
 #ifndef _ASM_ARCH_SA1111
 #define _ASM_ARCH_SA1111
 
-#include <mach/bitfield.h>
-
 /*
  * Don't ask the (SAC) DMA engines to move less than this amount.
  */
diff --git a/arch/arm/include/asm/hypervisor.h b/arch/arm/include/asm/hypervisor.h
index df8524365637..bd61502b9715 100644
--- a/arch/arm/include/asm/hypervisor.h
+++ b/arch/arm/include/asm/hypervisor.h
@@ -4,4 +4,7 @@
 
 #include <asm/xen/hypervisor.h>
 
+void kvm_init_hyp_services(void);
+bool kvm_arm_hyp_service_available(u32 func_id);
+
 #endif
diff --git a/arch/arm/include/asm/insn.h b/arch/arm/include/asm/insn.h
index f20e08ac85ae..faf3d1c28368 100644
--- a/arch/arm/include/asm/insn.h
+++ b/arch/arm/include/asm/insn.h
@@ -2,6 +2,23 @@
 #ifndef __ASM_ARM_INSN_H
 #define __ASM_ARM_INSN_H
 
+#include <linux/types.h>
+
+/*
+ * Avoid a literal load by emitting a sequence of ADD/LDR instructions with the
+ * appropriate relocations. The combined sequence has a range of -/+ 256 MiB,
+ * which should be sufficient for the core kernel as well as modules loaded
+ * into the module region. (Not supported by LLD before release 14)
+ */
+#define LOAD_SYM_ARMV6(reg, sym)					\
+	"	.globl	" #sym "				\n\t"	\
+	"	.reloc	10f, R_ARM_ALU_PC_G0_NC, " #sym "	\n\t"	\
+	"	.reloc	11f, R_ARM_ALU_PC_G1_NC, " #sym "	\n\t"	\
+	"	.reloc	12f, R_ARM_LDR_PC_G2, " #sym "		\n\t"	\
+	"10:	sub	" #reg ", pc, #8			\n\t"	\
+	"11:	sub	" #reg ", " #reg ", #4			\n\t"	\
+	"12:	ldr	" #reg ", [" #reg ", #0]		\n\t"
+
 static inline unsigned long
 arm_gen_nop(void)
 {
@@ -13,18 +30,18 @@ arm_gen_nop(void)
 }
 
 unsigned long
-__arm_gen_branch(unsigned long pc, unsigned long addr, bool link);
+__arm_gen_branch(unsigned long pc, unsigned long addr, bool link, bool warn);
 
 static inline unsigned long
 arm_gen_branch(unsigned long pc, unsigned long addr)
 {
-	return __arm_gen_branch(pc, addr, false);
+	return __arm_gen_branch(pc, addr, false, true);
 }
 
 static inline unsigned long
-arm_gen_branch_link(unsigned long pc, unsigned long addr)
+arm_gen_branch_link(unsigned long pc, unsigned long addr, bool warn)
 {
-	return __arm_gen_branch(pc, addr, true);
+	return __arm_gen_branch(pc, addr, true, warn);
 }
 
 #endif
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index fc748122f1e0..7fcdc785366c 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -138,11 +138,10 @@ extern void __iomem *__arm_ioremap_caller(phys_addr_t, size_t, unsigned int,
 	void *);
 extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
 extern void __iomem *__arm_ioremap_exec(phys_addr_t, size_t, bool cached);
-extern void __iounmap(volatile void __iomem *addr);
+void __arm_iomem_set_ro(void __iomem *ptr, size_t size);
 
 extern void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t,
 	unsigned int, void *);
-extern void (*arch_iounmap)(volatile void __iomem *);
 
 /*
  * Bad read/write accesses...
@@ -173,13 +172,16 @@ static inline void __iomem *__typesafe_io(unsigned long addr)
 #define PCI_IO_VIRT_BASE	0xfee00000
 #define PCI_IOBASE		((void __iomem *)PCI_IO_VIRT_BASE)
 
-#if defined(CONFIG_PCI)
+#if defined(CONFIG_PCI) || IS_ENABLED(CONFIG_PCMCIA)
 void pci_ioremap_set_mem_type(int mem_type);
 #else
 static inline void pci_ioremap_set_mem_type(int mem_type) {}
 #endif
 
-extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr);
+struct resource;
+
+#define pci_remap_iospace pci_remap_iospace
+int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr);
 
 /*
  * PCI configuration space mapping function.
@@ -196,32 +198,13 @@ void __iomem *pci_remap_cfgspace(resource_size_t res_cookie, size_t size);
  */
 #ifdef CONFIG_NEED_MACH_IO_H
 #include <mach/io.h>
-#elif defined(CONFIG_PCI)
-#define IO_SPACE_LIMIT	((resource_size_t)0xfffff)
-#define __io(a)		__typesafe_io(PCI_IO_VIRT_BASE + ((a) & IO_SPACE_LIMIT))
 #else
-#define __io(a)		__typesafe_io((a) & IO_SPACE_LIMIT)
-#endif
-
-/*
- * This is the limit of PC card/PCI/ISA IO space, which is by default
- * 64K if we have PC card, PCI or ISA support.  Otherwise, default to
- * zero to prevent ISA/PCI drivers claiming IO space (and potentially
- * oopsing.)
- *
- * Only set this larger if you really need inb() et.al. to operate over
- * a larger address space.  Note that SOC_COMMON ioremaps each sockets
- * IO space area, and so inb() et.al. must be defined to operate as per
- * readb() et.al. on such platforms.
- */
-#ifndef IO_SPACE_LIMIT
-#if defined(CONFIG_PCMCIA_SOC_COMMON) || defined(CONFIG_PCMCIA_SOC_COMMON_MODULE)
-#define IO_SPACE_LIMIT ((resource_size_t)0xffffffff)
-#elif defined(CONFIG_PCI) || defined(CONFIG_ISA) || defined(CONFIG_PCCARD)
-#define IO_SPACE_LIMIT ((resource_size_t)0xffff)
+#if IS_ENABLED(CONFIG_PCMCIA) || defined(CONFIG_PCI)
+#define IO_SPACE_LIMIT	((resource_size_t)0xfffff)
 #else
 #define IO_SPACE_LIMIT ((resource_size_t)0)
 #endif
+#define __io(a)		__typesafe_io(PCI_IO_VIRT_BASE + ((a) & IO_SPACE_LIMIT))
 #endif
 
 /*
@@ -395,7 +378,7 @@ void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size);
 #define ioremap_wc ioremap_wc
 #define ioremap_wt ioremap_wc
 
-void iounmap(volatile void __iomem *iomem_cookie);
+void iounmap(volatile void __iomem *io_addr);
 #define iounmap iounmap
 
 void *arch_memremap_wb(phys_addr_t phys_addr, size_t size);
@@ -430,17 +413,15 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
  */
 #define xlate_dev_mem_ptr(p)	__va(p)
 
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
 #include <asm-generic/io.h>
 
 #ifdef CONFIG_MMU
 #define ARCH_HAS_VALID_PHYS_ADDR_RANGE
 extern int valid_phys_addr_range(phys_addr_t addr, size_t size);
 extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+extern bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
+					unsigned long flags);
+#define arch_memremap_can_ram_remap arch_memremap_can_ram_remap
 #endif
 
 /*
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index 1cbcc462b07e..a7c2337b0c7d 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -26,7 +26,6 @@
 struct irqaction;
 struct pt_regs;
 
-extern void asm_do_IRQ(unsigned int, struct pt_regs *);
 void handle_IRQ(unsigned int, struct pt_regs *);
 void init_IRQ(void);
 
diff --git a/arch/arm/include/asm/irq_work.h b/arch/arm/include/asm/irq_work.h
index 8895999834cc..3149e4dc1b54 100644
--- a/arch/arm/include/asm/irq_work.h
+++ b/arch/arm/include/asm/irq_work.h
@@ -9,4 +9,6 @@ static inline bool arch_irq_work_has_interrupt(void)
 	return is_smp();
 }
 
+extern void arch_irq_work_raise(void);
+
 #endif /* _ASM_ARM_IRQ_WORK_H */
diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h
index 22751b5b5735..e62832dcba76 100644
--- a/arch/arm/include/asm/kexec.h
+++ b/arch/arm/include/asm/kexec.h
@@ -56,9 +56,6 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
 	}
 }
 
-/* Function pointer to optional machine-specific reinitialization */
-extern void (*kexec_reinit)(void);
-
 static inline unsigned long phys_to_boot_phys(phys_addr_t phys)
 {
 	return phys_to_idmap(phys);
diff --git a/arch/arm/include/asm/kfence.h b/arch/arm/include/asm/kfence.h
new file mode 100644
index 000000000000..7980d0f2271f
--- /dev/null
+++ b/arch/arm/include/asm/kfence.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __ASM_ARM_KFENCE_H
+#define __ASM_ARM_KFENCE_H
+
+#include <linux/kfence.h>
+
+#include <asm/pgalloc.h>
+#include <asm/set_memory.h>
+
+static inline int split_pmd_page(pmd_t *pmd, unsigned long addr)
+{
+	int i;
+	unsigned long pfn = PFN_DOWN(__pa(addr));
+	pte_t *pte = pte_alloc_one_kernel(&init_mm);
+
+	if (!pte)
+		return -ENOMEM;
+
+	for (i = 0; i < PTRS_PER_PTE; i++)
+		set_pte_ext(pte + i, pfn_pte(pfn + i, PAGE_KERNEL), 0);
+	pmd_populate_kernel(&init_mm, pmd, pte);
+
+	flush_tlb_kernel_range(addr, addr + PMD_SIZE);
+	return 0;
+}
+
+static inline bool arch_kfence_init_pool(void)
+{
+	unsigned long addr;
+	pmd_t *pmd;
+
+	for (addr = (unsigned long)__kfence_pool; is_kfence_address((void *)addr);
+	     addr += PAGE_SIZE) {
+		pmd = pmd_off_k(addr);
+
+		if (pmd_leaf(*pmd)) {
+			if (split_pmd_page(pmd, addr & PMD_MASK))
+				return false;
+		}
+	}
+
+	return true;
+}
+
+static inline bool kfence_protect_page(unsigned long addr, bool protect)
+{
+	set_memory_valid(addr, 1, !protect);
+
+	return true;
+}
+
+#endif /* __ASM_ARM_KFENCE_H */
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index eec0c0bda766..9349e7a82c9c 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -56,9 +56,7 @@ struct machine_desc {
 	void			(*init_time)(void);
 	void			(*init_machine)(void);
 	void			(*init_late)(void);
-#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 	void			(*handle_irq)(struct pt_regs *);
-#endif
 	void			(*restart)(enum reboot_mode, const char *);
 };
 
diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h
index 1506422af383..5ec11d7f0d04 100644
--- a/arch/arm/include/asm/mach/dma.h
+++ b/arch/arm/include/asm/mach/dma.h
@@ -44,8 +44,3 @@ struct dma_struct {
  * isa_dma_add - add an ISA-style DMA channel
  */
 extern int isa_dma_add(unsigned int, dma_t *dma);
-
-/*
- * Add the ISA DMA controller.  Always takes channels 0-7.
- */
-extern void isa_init_dma(void);
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 92282558caf7..2b8970d8e5a2 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -27,6 +27,7 @@ enum {
 	MT_HIGH_VECTORS,
 	MT_MEMORY_RWX,
 	MT_MEMORY_RW,
+	MT_MEMORY_RO,
 	MT_ROM,
 	MT_MEMORY_RWX_NONCACHED,
 	MT_MEMORY_RW_DTCM,
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 2f841cb65c30..62e9df024445 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -20,8 +20,14 @@
 #endif
 #include <asm/kasan_def.h>
 
-/* PAGE_OFFSET - the virtual address of the start of the kernel image */
+/*
+ * PAGE_OFFSET: the virtual address of the start of lowmem, memory above
+ *   the virtual address range for userspace.
+ * KERNEL_OFFSET: the virtual address of the start of the kernel image.
+ *   we may further offset this with TEXT_OFFSET in practice.
+ */
 #define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
+#define KERNEL_OFFSET		(PAGE_OFFSET)
 
 #ifdef CONFIG_MMU
 
@@ -150,22 +156,15 @@ extern unsigned long vectors_base;
  */
 #define PLAT_PHYS_OFFSET	UL(CONFIG_PHYS_OFFSET)
 
-#ifdef CONFIG_XIP_KERNEL
+#ifndef __ASSEMBLY__
+
 /*
- * When referencing data in RAM from the XIP region in a relative manner
- * with the MMU off, we need the relative offset between the two physical
- * addresses.  The macro below achieves this, which is:
- *    __pa(v_data) - __xip_pa(v_text)
+ * Physical start and end address of the kernel sections. These addresses are
+ * 2MB-aligned to match the section mappings placed over the kernel. We use
+ * u64 so that LPAE mappings beyond the 32bit limit will work out as well.
  */
-#define PHYS_RELATIVE(v_data, v_text) \
-	(((v_data) - PAGE_OFFSET + PLAT_PHYS_OFFSET) - \
-	 ((v_text) - XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) + \
-          CONFIG_XIP_PHYS_ADDR))
-#else
-#define PHYS_RELATIVE(v_data, v_text) ((v_data) - (v_text))
-#endif
-
-#ifndef __ASSEMBLY__
+extern u64 kernel_sec_start;
+extern u64 kernel_sec_end;
 
 /*
  * Physical vs virtual RAM address space conversion.  These are
@@ -371,19 +370,6 @@ static inline unsigned long __virt_to_idmap(unsigned long x)
 #define virt_to_idmap(x)	__virt_to_idmap((unsigned long)(x))
 
 /*
- * Virtual <-> DMA view memory address translations
- * Again, these are *only* valid on the kernel direct mapped RAM
- * memory.  Use of these is *deprecated* (and that doesn't mean
- * use the __ prefixed forms instead.)  See dma-mapping.h.
- */
-#ifndef __virt_to_bus
-#define __virt_to_bus	__virt_to_phys
-#define __bus_to_virt	__phys_to_virt
-#define __pfn_to_bus(x)	__pfn_to_phys(x)
-#define __bus_to_pfn(x)	__phys_to_pfn(x)
-#endif
-
-/*
  * Conversion between a struct page and a physical address.
  *
  *  page_to_pfn(page)	convert a struct page * to a PFN number
@@ -400,6 +386,4 @@ static inline unsigned long __virt_to_idmap(unsigned long x)
 
 #endif
 
-#include <asm-generic/memory_model.h>
-
 #endif
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index 1592a4264488..e049723840d3 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -10,7 +10,7 @@ typedef struct {
 #else
 	int		switch_pending;
 #endif
-	unsigned int	vmalloc_seq;
+	atomic_t	vmalloc_seq;
 	unsigned long	sigpage;
 #ifdef CONFIG_VDSO
 	unsigned long	vdso;
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 84e58956fcab..db2cb06aa8cf 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -23,6 +23,16 @@
 
 void __check_vmalloc_seq(struct mm_struct *mm);
 
+#ifdef CONFIG_MMU
+static inline void check_vmalloc_seq(struct mm_struct *mm)
+{
+	if (!IS_ENABLED(CONFIG_ARM_LPAE) &&
+	    unlikely(atomic_read(&mm->context.vmalloc_seq) !=
+		     atomic_read(&init_mm.context.vmalloc_seq)))
+		__check_vmalloc_seq(mm);
+}
+#endif
+
 #ifdef CONFIG_CPU_HAS_ASID
 
 void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
@@ -52,8 +62,7 @@ static inline void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,
 static inline void check_and_switch_context(struct mm_struct *mm,
 					    struct task_struct *tsk)
 {
-	if (unlikely(mm->context.vmalloc_seq != init_mm.context.vmalloc_seq))
-		__check_vmalloc_seq(mm);
+	check_vmalloc_seq(mm);
 
 	if (irqs_disabled())
 		/*
@@ -129,6 +138,15 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 #endif
 }
 
+#ifdef CONFIG_VMAP_STACK
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+	if (mm != &init_mm)
+		check_vmalloc_seq(mm);
+}
+#define enter_lazy_tlb enter_lazy_tlb
+#endif
+
 #include <asm-generic/mmu_context.h>
 
 #endif
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
index 4b0df09cbe67..07c51a34f77d 100644
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -3,30 +3,31 @@
 #define _ASM_ARM_MODULE_H
 
 #include <asm-generic/module.h>
-
-struct unwind_table;
+#include <asm/unwind.h>
 
 #ifdef CONFIG_ARM_UNWIND
-enum {
-	ARM_SEC_INIT,
-	ARM_SEC_DEVINIT,
-	ARM_SEC_CORE,
-	ARM_SEC_EXIT,
-	ARM_SEC_DEVEXIT,
-	ARM_SEC_HOT,
-	ARM_SEC_UNLIKELY,
-	ARM_SEC_MAX,
-};
+#define ELF_SECTION_UNWIND 0x70000001
 #endif
 
+#define PLT_ENT_STRIDE		L1_CACHE_BYTES
+#define PLT_ENT_COUNT		(PLT_ENT_STRIDE / sizeof(u32))
+#define PLT_ENT_SIZE		(sizeof(struct plt_entries) / PLT_ENT_COUNT)
+
+struct plt_entries {
+	u32	ldr[PLT_ENT_COUNT];
+	u32	lit[PLT_ENT_COUNT];
+};
+
 struct mod_plt_sec {
 	struct elf32_shdr	*plt;
+	struct plt_entries	*plt_ent;
 	int			plt_count;
 };
 
 struct mod_arch_specific {
 #ifdef CONFIG_ARM_UNWIND
-	struct unwind_table *unwind[ARM_SEC_MAX];
+	struct list_head unwind_list;
+	struct unwind_table *init_table;
 #endif
 #ifdef CONFIG_ARM_MODULE_PLTS
 	struct mod_plt_sec	core;
@@ -36,6 +37,11 @@ struct mod_arch_specific {
 
 struct module;
 u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val);
+#ifdef CONFIG_ARM_MODULE_PLTS
+bool in_module_plt(unsigned long loc);
+#else
+static inline bool in_module_plt(unsigned long loc) { return false; }
+#endif
 
 #ifdef CONFIG_THUMB2_KERNEL
 #define HAVE_ARCH_KALLSYMS_SYMBOL_VALUE
diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h
index 6bff94b2372b..38e3eabff5c3 100644
--- a/arch/arm/include/asm/opcodes.h
+++ b/arch/arm/include/asm/opcodes.h
@@ -110,12 +110,17 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
 #define __opcode_to_mem_thumb16(x) ___opcode_identity16(x)
 #define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x)
 #define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_identity16(x)
-#ifndef CONFIG_CPU_ENDIAN_BE32
+#ifdef CONFIG_CPU_ENDIAN_BE32
+#ifndef __ASSEMBLY__
 /*
  * On BE32 systems, using 32-bit accesses to store Thumb instructions will not
  * work in all cases, due to alignment constraints.  For now, a correct
- * version is not provided for BE32.
+ * version is not provided for BE32, but the prototype needs to be there
+ * to compile patch.c.
  */
+extern __u32 __opcode_to_mem_thumb32(__u32);
+#endif
+#else
 #define __opcode_to_mem_thumb32(x) ___opcode_swahw32(x)
 #define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahw32(x)
 #endif
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 11b058a72a5b..74bb5947b387 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -147,6 +147,9 @@ extern void copy_page(void *to, const void *from);
 #include <asm/pgtable-3level-types.h>
 #else
 #include <asm/pgtable-2level-types.h>
+#ifdef CONFIG_VMAP_STACK
+#define ARCH_PAGE_TABLE_SYNC_MASK	PGTBL_PMD_MODIFIED
+#endif
 #endif
 
 #endif /* CONFIG_MMU */
@@ -155,6 +158,7 @@ typedef struct page *pgtable_t;
 
 #ifdef CONFIG_HAVE_ARCH_PFN_VALID
 extern int pfn_valid(unsigned long);
+#define pfn_valid pfn_valid
 #endif
 
 #include <asm/memory.h>
@@ -164,5 +168,6 @@ extern int pfn_valid(unsigned long);
 #define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_TSK_EXEC
 
 #include <asm-generic/getorder.h>
+#include <asm-generic/memory_model.h>
 
 #endif
diff --git a/arch/arm/include/asm/paravirt.h b/arch/arm/include/asm/paravirt.h
index cdbf02d9c1d4..95d5b0d625cd 100644
--- a/arch/arm/include/asm/paravirt.h
+++ b/arch/arm/include/asm/paravirt.h
@@ -3,23 +3,19 @@
 #define _ASM_ARM_PARAVIRT_H
 
 #ifdef CONFIG_PARAVIRT
+#include <linux/static_call_types.h>
+
 struct static_key;
 extern struct static_key paravirt_steal_enabled;
 extern struct static_key paravirt_steal_rq_enabled;
 
-struct pv_time_ops {
-	unsigned long long (*steal_clock)(int cpu);
-};
-
-struct paravirt_patch_template {
-	struct pv_time_ops time;
-};
+u64 dummy_steal_clock(int cpu);
 
-extern struct paravirt_patch_template pv_ops;
+DECLARE_STATIC_CALL(pv_steal_clock, dummy_steal_clock);
 
 static inline u64 paravirt_steal_clock(int cpu)
 {
-	return pv_ops.time.steal_clock(cpu);
+	return static_call(pv_steal_clock)(cpu);
 }
 #endif
 
diff --git a/arch/arm/include/asm/paravirt_api_clock.h b/arch/arm/include/asm/paravirt_api_clock.h
new file mode 100644
index 000000000000..65ac7cee0dad
--- /dev/null
+++ b/arch/arm/include/asm/paravirt_api_clock.h
@@ -0,0 +1 @@
+#include <asm/paravirt.h>
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index 68e6f25784a4..5916b88d4c94 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -22,11 +22,6 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 #define HAVE_PCI_MMAP
 #define ARCH_GENERIC_PCI_MMAP_RESOURCE
 
-static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
-{
-	return channel ? 15 : 14;
-}
-
 extern void pcibios_report_status(unsigned int status_mask, int warn);
 
 #endif /* __KERNEL__ */
diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h
index e2fcb3cfd3de..7545c87c251f 100644
--- a/arch/arm/include/asm/percpu.h
+++ b/arch/arm/include/asm/percpu.h
@@ -5,20 +5,27 @@
 #ifndef _ASM_ARM_PERCPU_H_
 #define _ASM_ARM_PERCPU_H_
 
+#include <asm/insn.h>
+
 register unsigned long current_stack_pointer asm ("sp");
 
 /*
  * Same as asm-generic/percpu.h, except that we store the per cpu offset
  * in the TPIDRPRW. TPIDRPRW only exists on V6K and V7
  */
-#if defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6)
+#ifdef CONFIG_SMP
 static inline void set_my_cpu_offset(unsigned long off)
 {
+	extern unsigned int smp_on_up;
+
+	if (IS_ENABLED(CONFIG_CPU_V6) && !smp_on_up)
+		return;
+
 	/* Set TPIDRPRW */
 	asm volatile("mcr p15, 0, %0, c13, c0, 4" : : "r" (off) : "memory");
 }
 
-static inline unsigned long __my_cpu_offset(void)
+static __always_inline unsigned long __my_cpu_offset(void)
 {
 	unsigned long off;
 
@@ -27,8 +34,28 @@ static inline unsigned long __my_cpu_offset(void)
 	 * We want to allow caching the value, so avoid using volatile and
 	 * instead use a fake stack read to hazard against barrier().
 	 */
-	asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off)
-		: "Q" (*(const unsigned long *)current_stack_pointer));
+	asm("0:	mrc p15, 0, %0, c13, c0, 4			\n\t"
+#ifdef CONFIG_CPU_V6
+	    "1:							\n\t"
+	    "	.subsection 1					\n\t"
+#if defined(CONFIG_ARM_HAS_GROUP_RELOCS) && \
+    !(defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
+	    "2: " LOAD_SYM_ARMV6(%0, __per_cpu_offset) "	\n\t"
+	    "	b	1b					\n\t"
+#else
+	    "2: ldr	%0, 3f					\n\t"
+	    "	ldr	%0, [%0]				\n\t"
+	    "	b	1b					\n\t"
+	    "3:	.long	__per_cpu_offset			\n\t"
+#endif
+	    "	.previous					\n\t"
+	    "	.pushsection \".alt.smp.init\", \"a\"		\n\t"
+	    "	.long	0b - .					\n\t"
+	    "	b	. + (2b - 0b)				\n\t"
+	    "	.popsection					\n\t"
+#endif
+	     : "=r" (off)
+	     : "Q" (*(const unsigned long *)current_stack_pointer));
 
 	return off;
 }
diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
index fe87397c3d8c..bdbc1e590891 100644
--- a/arch/arm/include/asm/perf_event.h
+++ b/arch/arm/include/asm/perf_event.h
@@ -17,7 +17,7 @@ extern unsigned long perf_misc_flags(struct pt_regs *regs);
 
 #define perf_arch_fetch_caller_regs(regs, __ip) { \
 	(regs)->ARM_pc = (__ip); \
-	(regs)->ARM_fp = (unsigned long) __builtin_frame_address(0); \
+	frame_pointer((regs)) = (unsigned long) __builtin_frame_address(0); \
 	(regs)->ARM_sp = current_stack_pointer; \
 	(regs)->ARM_cpsr = SVC_MODE; \
 }
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index fdee1f04f4f3..a17f01235c29 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -143,7 +143,6 @@ pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep)
 
 	__pmd_populate(pmdp, page_to_phys(ptep), prot);
 }
-#define pmd_pgtable(pmd) pmd_page(pmd)
 
 #endif /* CONFIG_MMU */
 
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index 70fe69bdcce2..ce543cd9380c 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -126,6 +126,9 @@
 #define L_PTE_SHARED		(_AT(pteval_t, 1) << 10)	/* shared(v6), coherent(xsc3) */
 #define L_PTE_NONE		(_AT(pteval_t, 1) << 11)
 
+/* We borrow bit 7 to store the exclusive marker in swap PTEs. */
+#define L_PTE_SWP_EXCLUSIVE	L_PTE_RDONLY
+
 /*
  * These are the memory types, defined to be compatible with
  * pre-ARMv6 CPUs cacheable and bufferable bits: n/a,n/a,C,B
@@ -208,6 +211,8 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 }
 #define pmd_offset pmd_offset
 
+#define pmd_pfn(pmd)		(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
+
 #define pmd_large(pmd)		(pmd_val(pmd) & 2)
 #define pmd_leaf(pmd)		(pmd_val(pmd) & 2)
 #define pmd_bad(pmd)		(pmd_val(pmd) & 2)
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index 2b85d175e999..106049791500 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -76,6 +76,9 @@
 #define L_PTE_NONE		(_AT(pteval_t, 1) << 57)	/* PROT_NONE */
 #define L_PTE_RDONLY		(_AT(pteval_t, 1) << 58)	/* READ ONLY */
 
+/* We borrow bit 7 to store the exclusive marker in swap PTEs. */
+#define L_PTE_SWP_EXCLUSIVE	(_AT(pteval_t, 1) << 7)
+
 #define L_PMD_SECT_VALID	(_AT(pmdval_t, 1) << 0)
 #define L_PMD_SECT_DIRTY	(_AT(pmdval_t, 1) << 55)
 #define L_PMD_SECT_NONE		(_AT(pmdval_t, 1) << 57)
@@ -130,7 +133,7 @@
 		flush_pmd_entry(pudp);	\
 	} while (0)
 
-static inline pmd_t *pud_page_vaddr(pud_t pud)
+static inline pmd_t *pud_pgtable(pud_t pud)
 {
 	return __va(pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK);
 }
@@ -186,8 +189,6 @@ static inline pte_t pte_mkspecial(pte_t pte)
 
 #define pmd_write(pmd)		(pmd_isclear((pmd), L_PMD_SECT_RDONLY))
 #define pmd_dirty(pmd)		(pmd_isset((pmd), L_PMD_SECT_DIRTY))
-#define pud_page(pud)		pmd_page(__pmd(pud_val(pud)))
-#define pud_write(pud)		pmd_write(__pmd(pud_val(pud)))
 
 #define pmd_hugewillfault(pmd)	(!pmd_young(pmd) || !pmd_write(pmd))
 #define pmd_thp_or_huge(pmd)	(pmd_huge(pmd) || pmd_trans_huge(pmd))
diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h
index d16aba48fa0a..61480d096054 100644
--- a/arch/arm/include/asm/pgtable-nommu.h
+++ b/arch/arm/include/asm/pgtable-nommu.h
@@ -21,8 +21,6 @@
 #define pgd_none(pgd)		(0)
 #define pgd_bad(pgd)		(0)
 #define pgd_clear(pgdp)
-#define kern_addr_valid(addr)	(1)
-/* FIXME */
 /*
  * PMD_SHIFT determines the size of the area a second-level page table can map
  * PGDIR_SHIFT determines what a third-level page table entry can map
@@ -45,12 +43,6 @@
 typedef pte_t *pte_addr_t;
 
 /*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
-
-/*
  * Mark the prot value as uncacheable and unbufferable.
  */
 #define pgprot_noncached(prot)	(prot)
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index c02f24400369..a58ccbb406ad 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -10,6 +10,15 @@
 #include <linux/const.h>
 #include <asm/proc-fns.h>
 
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(empty_zero_page)
+#endif
+
 #ifndef CONFIG_MMU
 
 #include <asm-generic/pgtable-nopud.h>
@@ -137,35 +146,14 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
  *  2) If we could do execute protection, then read is implied
  *  3) write implies read permissions
  */
-#define __P000  __PAGE_NONE
-#define __P001  __PAGE_READONLY
-#define __P010  __PAGE_COPY
-#define __P011  __PAGE_COPY
-#define __P100  __PAGE_READONLY_EXEC
-#define __P101  __PAGE_READONLY_EXEC
-#define __P110  __PAGE_COPY_EXEC
-#define __P111  __PAGE_COPY_EXEC
-
-#define __S000  __PAGE_NONE
-#define __S001  __PAGE_READONLY
-#define __S010  __PAGE_SHARED
-#define __S011  __PAGE_SHARED
-#define __S100  __PAGE_READONLY_EXEC
-#define __S101  __PAGE_READONLY_EXEC
-#define __S110  __PAGE_SHARED_EXEC
-#define __S111  __PAGE_SHARED_EXEC
 
 #ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr)	(empty_zero_page)
-
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
+#define pud_page(pud)		pmd_page(__pmd(pud_val(pud)))
+#define pud_write(pud)		pmd_write(__pmd(pud_val(pud)))
+
 #define pmd_none(pmd)		(!pmd_val(pmd))
 
 static inline pte_t *pmd_page_vaddr(pmd_t pmd)
@@ -283,27 +271,47 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 }
 
 /*
- * Encode and decode a swap entry.  Swap entries are stored in the Linux
- * page tables as follows:
+ * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that
+ * are !pte_none() && !pte_present().
+ *
+ * Format of swap PTEs:
  *
  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <--------------- offset ------------------------> < type -> 0 0
+ *   <------------------- offset ------------------> E < type -> 0 0
+ *
+ *   E is the exclusive marker that is not stored in swap entries.
  *
- * This gives us up to 31 swap files and 128GB per swap file.  Note that
+ * This gives us up to 31 swap files and 64GB per swap file.  Note that
  * the offset field is always non-zero.
  */
 #define __SWP_TYPE_SHIFT	2
 #define __SWP_TYPE_BITS		5
 #define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
-#define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+#define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT + 1)
 
 #define __swp_type(x)		(((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
 #define __swp_offset(x)		((x).val >> __SWP_OFFSET_SHIFT)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
+#define __swp_entry(type, offset) ((swp_entry_t) { (((type) & __SWP_TYPE_MASK) << __SWP_TYPE_SHIFT) | \
+						   ((offset) << __SWP_OFFSET_SHIFT) })
 
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
+#define __swp_entry_to_pte(swp)	__pte((swp).val)
+
+static inline int pte_swp_exclusive(pte_t pte)
+{
+	return pte_isset(pte, L_PTE_SWP_EXCLUSIVE);
+}
+
+static inline pte_t pte_swp_mkexclusive(pte_t pte)
+{
+	return set_pte_bit(pte, __pgprot(L_PTE_SWP_EXCLUSIVE));
+}
+
+static inline pte_t pte_swp_clear_exclusive(pte_t pte)
+{
+	return clear_pte_bit(pte, __pgprot(L_PTE_SWP_EXCLUSIVE));
+}
 
 /*
  * It is an error for the kernel to have more swap files than we can
@@ -312,10 +320,6 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
  */
 #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
 
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-/* FIXME: this is not correct */
-#define kern_addr_valid(addr)	(1)
-
 /*
  * We provide our own arch_get_unmapped_area to cope with VIPT caches.
  */
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index 9e6b97286307..326864f79d18 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -81,10 +81,7 @@ static inline void arch_thread_struct_whitelist(unsigned long *offset,
 /* Forward declaration, a strange C thing */
 struct task_struct;
 
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
-unsigned long get_wchan(struct task_struct *p);
+unsigned long __get_wchan(struct task_struct *p);
 
 #define task_pt_regs(p) \
 	((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
@@ -96,6 +93,7 @@ unsigned long get_wchan(struct task_struct *p);
 #define __ALT_SMP_ASM(smp, up)						\
 	"9998:	" smp "\n"						\
 	"	.pushsection \".alt.smp.init\", \"a\"\n"		\
+	"	.align	2\n"						\
 	"	.long	9998b - .\n"					\
 	"	" up "\n"						\
 	"	.popsection\n"
diff --git a/arch/arm/include/asm/ptdump.h b/arch/arm/include/asm/ptdump.h
index 0c2d3d0d4cc6..aad1d034136c 100644
--- a/arch/arm/include/asm/ptdump.h
+++ b/arch/arm/include/asm/ptdump.h
@@ -21,6 +21,7 @@ struct ptdump_info {
 
 void ptdump_walk_pgd(struct seq_file *s, struct ptdump_info *info);
 #ifdef CONFIG_ARM_PTDUMP_DEBUGFS
+#define EFI_RUNTIME_MAP_END	SZ_1G
 void ptdump_debugfs_register(struct ptdump_info *info, const char *name);
 #else
 static inline void ptdump_debugfs_register(struct ptdump_info *info,
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 91d6b7856be4..483b8ddfcb82 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -19,7 +19,6 @@ struct pt_regs {
 struct svc_pt_regs {
 	struct pt_regs regs;
 	u32 dacr;
-	u32 addr_limit;
 };
 
 #define to_svc_pt_regs(r) container_of(r, struct svc_pt_regs, regs)
@@ -164,5 +163,35 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
 		((current_stack_pointer | (THREAD_SIZE - 1)) - 7) - 1;	\
 })
 
+static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc)
+{
+	regs->ARM_r0 = rc;
+}
+
+/*
+ * Update ITSTATE after normal execution of an IT block instruction.
+ *
+ * The 8 IT state bits are split into two parts in CPSR:
+ *	ITSTATE<1:0> are in CPSR<26:25>
+ *	ITSTATE<7:2> are in CPSR<15:10>
+ */
+static inline unsigned long it_advance(unsigned long cpsr)
+{
+	if ((cpsr & 0x06000400) == 0) {
+		/* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
+		cpsr &= ~PSR_IT_MASK;
+	} else {
+		/* We need to shift left ITSTATE<4:0> */
+		const unsigned long mask = 0x06001c00;  /* Mask ITSTATE<4:0> */
+		unsigned long it = cpsr & mask;
+		it <<= 1;
+		it |= it >> (27 - 10);  /* Carry ITSTATE<2> to correct place */
+		it &= mask;
+		cpsr &= ~mask;
+		cpsr |= it;
+	}
+	return cpsr;
+}
+
 #endif /* __ASSEMBLY__ */
 #endif
diff --git a/arch/arm/include/asm/semihost.h b/arch/arm/include/asm/semihost.h
new file mode 100644
index 000000000000..f365787e7c23
--- /dev/null
+++ b/arch/arm/include/asm/semihost.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Adapted for ARM and earlycon:
+ * Copyright (C) 2014 Linaro Ltd.
+ * Author: Rob Herring <robh@kernel.org>
+ */
+
+#ifndef _ARM_SEMIHOST_H_
+#define _ARM_SEMIHOST_H_
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define SEMIHOST_SWI	"0xab"
+#else
+#define SEMIHOST_SWI	"0x123456"
+#endif
+
+struct uart_port;
+
+static inline void smh_putc(struct uart_port *port, unsigned char c)
+{
+	asm volatile("mov  r1, %0\n"
+		     "mov  r0, #3\n"
+		     "svc  " SEMIHOST_SWI "\n"
+		     : : "r" (&c) : "r0", "r1", "memory");
+}
+
+#endif /* _ARM_SEMIHOST_H_ */
diff --git a/arch/arm/include/asm/set_memory.h b/arch/arm/include/asm/set_memory.h
index a1ceff4295d3..0211b9c5b14d 100644
--- a/arch/arm/include/asm/set_memory.h
+++ b/arch/arm/include/asm/set_memory.h
@@ -11,6 +11,7 @@ int set_memory_ro(unsigned long addr, int numpages);
 int set_memory_rw(unsigned long addr, int numpages);
 int set_memory_x(unsigned long addr, int numpages);
 int set_memory_nx(unsigned long addr, int numpages);
+int set_memory_valid(unsigned long addr, int numpages, int enable);
 #else
 static inline int set_memory_ro(unsigned long addr, int numpages) { return 0; }
 static inline int set_memory_rw(unsigned long addr, int numpages) { return 0; }
@@ -18,12 +19,4 @@ static inline int set_memory_x(unsigned long addr, int numpages) { return 0; }
 static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; }
 #endif
 
-#ifdef CONFIG_STRICT_KERNEL_RWX
-void set_kernel_text_rw(void);
-void set_kernel_text_ro(void);
-#else
-static inline void set_kernel_text_rw(void) { }
-static inline void set_kernel_text_ro(void) { }
-#endif
-
 #endif
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 3ae68a1b3de6..ba0872a8dcda 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -19,7 +19,7 @@
 static const struct tagtable __tagtable_##fn __tag = { tag, fn }
 
 extern int arm_add_memory(u64 start, u64 size);
-extern void early_print(const char *str, ...);
+extern __printf(1, 2) void early_print(const char *str, ...);
 extern void dump_machine_table(void);
 
 #ifdef CONFIG_ATAGS_PROC
diff --git a/arch/arm/include/asm/simd.h b/arch/arm/include/asm/simd.h
new file mode 100644
index 000000000000..82191dbd7e78
--- /dev/null
+++ b/arch/arm/include/asm/simd.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include <linux/hardirq.h>
+
+static __must_check inline bool may_use_simd(void)
+{
+	return IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && !in_hardirq();
+}
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 5d508f5d56c4..7c1c90d9f582 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -25,11 +25,6 @@ struct seq_file;
 extern void show_ipi_list(struct seq_file *, int);
 
 /*
- * Called from assembly code, this handles an IPI.
- */
-asmlinkage void do_IPI(int ipinr, struct pt_regs *regs);
-
-/*
  * Called from C code, this handles an IPI.
  */
 void handle_IPI(int ipinr, struct pt_regs *regs);
@@ -48,7 +43,7 @@ extern void set_smp_ipi_range(int ipi_base, int nr_ipi);
  * Called from platform specific assembly code, this is the
  * secondary CPU entry point.
  */
-asmlinkage void secondary_start_kernel(void);
+asmlinkage void secondary_start_kernel(struct task_struct *task);
 
 
 /*
@@ -61,6 +56,7 @@ struct secondary_data {
 	};
 	unsigned long swapper_pg_dir;
 	void *stack;
+	struct task_struct *task;
 };
 extern struct secondary_data secondary_data;
 extern void secondary_startup(void);
diff --git a/arch/arm/include/asm/spectre.h b/arch/arm/include/asm/spectre.h
new file mode 100644
index 000000000000..85f9e538fb32
--- /dev/null
+++ b/arch/arm/include/asm/spectre.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ASM_SPECTRE_H
+#define __ASM_SPECTRE_H
+
+enum {
+	SPECTRE_UNAFFECTED,
+	SPECTRE_MITIGATED,
+	SPECTRE_VULNERABLE,
+};
+
+enum {
+	__SPECTRE_V2_METHOD_BPIALL,
+	__SPECTRE_V2_METHOD_ICIALLU,
+	__SPECTRE_V2_METHOD_SMC,
+	__SPECTRE_V2_METHOD_HVC,
+	__SPECTRE_V2_METHOD_LOOP8,
+};
+
+enum {
+	SPECTRE_V2_METHOD_BPIALL = BIT(__SPECTRE_V2_METHOD_BPIALL),
+	SPECTRE_V2_METHOD_ICIALLU = BIT(__SPECTRE_V2_METHOD_ICIALLU),
+	SPECTRE_V2_METHOD_SMC = BIT(__SPECTRE_V2_METHOD_SMC),
+	SPECTRE_V2_METHOD_HVC = BIT(__SPECTRE_V2_METHOD_HVC),
+	SPECTRE_V2_METHOD_LOOP8 = BIT(__SPECTRE_V2_METHOD_LOOP8),
+};
+
+#ifdef CONFIG_GENERIC_CPU_VULNERABILITIES
+void spectre_v2_update_state(unsigned int state, unsigned int methods);
+#else
+static inline void spectre_v2_update_state(unsigned int state,
+					   unsigned int methods)
+{}
+#endif
+
+int spectre_bhb_update_vectors(unsigned int method);
+
+#endif
diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h
index 8f009e788ad4..f610a773f2be 100644
--- a/arch/arm/include/asm/spinlock.h
+++ b/arch/arm/include/asm/spinlock.h
@@ -22,7 +22,7 @@
  * assembler to insert a extra (16-bit) IT instruction, depending on the
  * presence or absence of neighbouring conditional instructions.
  *
- * To avoid this unpredictableness, an approprite IT is inserted explicitly:
+ * To avoid this unpredictability, an appropriate IT is inserted explicitly:
  * the assembler won't change IT instructions which are explicitly present
  * in the input.
  */
diff --git a/arch/arm/include/asm/spinlock_types.h b/arch/arm/include/asm/spinlock_types.h
index 5976958647fe..0c14b36ef101 100644
--- a/arch/arm/include/asm/spinlock_types.h
+++ b/arch/arm/include/asm/spinlock_types.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_SPINLOCK_TYPES_H
 #define __ASM_SPINLOCK_TYPES_H
 
-#ifndef __LINUX_SPINLOCK_TYPES_H
+#ifndef __LINUX_SPINLOCK_TYPES_RAW_H
 # error "please don't include this file directly"
 #endif
 
diff --git a/arch/arm/include/asm/stackprotector.h b/arch/arm/include/asm/stackprotector.h
index 72a20c3a0a90..0bd4979759f1 100644
--- a/arch/arm/include/asm/stackprotector.h
+++ b/arch/arm/include/asm/stackprotector.h
@@ -15,9 +15,6 @@
 #ifndef _ASM_STACKPROTECTOR_H
 #define _ASM_STACKPROTECTOR_H 1
 
-#include <linux/random.h>
-#include <linux/version.h>
-
 #include <asm/thread_info.h>
 
 extern unsigned long __stack_chk_guard;
@@ -30,17 +27,11 @@ extern unsigned long __stack_chk_guard;
  */
 static __always_inline void boot_init_stack_canary(void)
 {
-	unsigned long canary;
-
-	/* Try to get a semi random initial value. */
-	get_random_bytes(&canary, sizeof(canary));
-	canary ^= LINUX_VERSION_CODE;
+	unsigned long canary = get_random_canary();
 
 	current->stack_canary = canary;
 #ifndef CONFIG_STACKPROTECTOR_PER_TASK
 	__stack_chk_guard = current->stack_canary;
-#else
-	current_thread_info()->stack_canary = current->stack_canary;
 #endif
 }
 
diff --git a/arch/arm/include/asm/stacktrace.h b/arch/arm/include/asm/stacktrace.h
index 2d76a2e29f05..360f0d2406bf 100644
--- a/arch/arm/include/asm/stacktrace.h
+++ b/arch/arm/include/asm/stacktrace.h
@@ -3,6 +3,7 @@
 #define __ASM_STACKTRACE_H
 
 #include <asm/ptrace.h>
+#include <linux/llist.h>
 
 struct stackframe {
 	/*
@@ -13,6 +14,16 @@ struct stackframe {
 	unsigned long sp;
 	unsigned long lr;
 	unsigned long pc;
+
+	/* address of the LR value on the stack */
+	unsigned long *lr_addr;
+#ifdef CONFIG_KRETPROBES
+	struct llist_node *kr_cur;
+	struct task_struct *tsk;
+#endif
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+	bool ex_frame;
+#endif
 };
 
 static __always_inline
@@ -22,10 +33,21 @@ void arm_get_current_stackframe(struct pt_regs *regs, struct stackframe *frame)
 		frame->sp = regs->ARM_sp;
 		frame->lr = regs->ARM_lr;
 		frame->pc = regs->ARM_pc;
+#ifdef CONFIG_KRETPROBES
+		frame->kr_cur = NULL;
+		frame->tsk = current;
+#endif
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+		frame->ex_frame = in_entry_text(frame->pc);
+#endif
 }
 
 extern int unwind_frame(struct stackframe *frame);
 extern void walk_stackframe(struct stackframe *frame,
-			    int (*fn)(struct stackframe *, void *), void *data);
+			    bool (*fn)(void *, unsigned long), void *data);
+extern void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+		     unsigned long top);
+extern void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+			   const char *loglvl);
 
 #endif	/* __ASM_STACKTRACE_H */
diff --git a/arch/arm/include/asm/switch_to.h b/arch/arm/include/asm/switch_to.h
index 007d8fea7157..9372348516ce 100644
--- a/arch/arm/include/asm/switch_to.h
+++ b/arch/arm/include/asm/switch_to.h
@@ -3,6 +3,7 @@
 #define __ASM_ARM_SWITCH_TO_H
 
 #include <linux/thread_info.h>
+#include <asm/smp_plat.h>
 
 /*
  * For v7 SMP cores running a preemptible kernel we may be pre-empted
@@ -26,6 +27,8 @@ extern struct task_struct *__switch_to(struct task_struct *, struct thread_info
 #define switch_to(prev,next,last)					\
 do {									\
 	__complete_pending_tlbi();					\
+	if (IS_ENABLED(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || is_smp())	\
+		__this_cpu_write(__entry_task, next);			\
 	last = __switch_to(prev,task_thread_info(prev), task_thread_info(next));	\
 } while (0)
 
diff --git a/arch/arm/include/asm/sync_bitops.h b/arch/arm/include/asm/sync_bitops.h
index 39ff217136d1..6f5d627c44a3 100644
--- a/arch/arm/include/asm/sync_bitops.h
+++ b/arch/arm/include/asm/sync_bitops.h
@@ -21,7 +21,7 @@
 #define sync_test_and_clear_bit(nr, p)	_test_and_clear_bit(nr, p)
 #define sync_test_and_change_bit(nr, p)	_test_and_change_bit(nr, p)
 #define sync_test_bit(nr, addr)		test_bit(nr, addr)
-#define sync_cmpxchg			cmpxchg
+#define arch_sync_cmpxchg		arch_cmpxchg
 
 
 #endif
diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h
index fd02761ba06c..dfeed440254a 100644
--- a/arch/arm/include/asm/syscall.h
+++ b/arch/arm/include/asm/syscall.h
@@ -22,7 +22,21 @@ extern const unsigned long sys_call_table[];
 static inline int syscall_get_nr(struct task_struct *task,
 				 struct pt_regs *regs)
 {
-	return task_thread_info(task)->syscall;
+	if (IS_ENABLED(CONFIG_AEABI) && !IS_ENABLED(CONFIG_OABI_COMPAT))
+		return task_thread_info(task)->abi_syscall;
+
+	return task_thread_info(task)->abi_syscall & __NR_SYSCALL_MASK;
+}
+
+static inline bool __in_oabi_syscall(struct task_struct *task)
+{
+	return IS_ENABLED(CONFIG_OABI_COMPAT) &&
+		(task_thread_info(task)->abi_syscall & __NR_OABI_SYSCALL_BASE);
+}
+
+static inline bool in_oabi_syscall(void)
+{
+	return __in_oabi_syscall(current);
 }
 
 static inline void syscall_rollback(struct task_struct *task,
@@ -63,16 +77,6 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	memcpy(args, &regs->ARM_r0 + 1, 5 * sizeof(args[0]));
 }
 
-static inline void syscall_set_arguments(struct task_struct *task,
-					 struct pt_regs *regs,
-					 const unsigned long *args)
-{
-	regs->ARM_ORIG_r0 = args[0];
-	args++;
-
-	memcpy(&regs->ARM_r0 + 1, args, 5 * sizeof(args[0]));
-}
-
 static inline int syscall_get_arch(struct task_struct *task)
 {
 	/* ARM tasks don't change audit architectures on the fly. */
diff --git a/arch/arm/include/asm/system_misc.h b/arch/arm/include/asm/system_misc.h
index 66f6a3ae68d2..98b37340376b 100644
--- a/arch/arm/include/asm/system_misc.h
+++ b/arch/arm/include/asm/system_misc.h
@@ -13,7 +13,6 @@
 extern void cpu_init(void);
 
 void soft_restart(unsigned long);
-extern void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd);
 extern void (*arm_pm_idle)(void);
 
 #ifdef CONFIG_HARDEN_BRANCH_PREDICTOR
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 70d4cbc49ae1..943ffcf069d2 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -25,13 +25,22 @@
 #define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
 #define THREAD_START_SP		(THREAD_SIZE - 8)
 
+#ifdef CONFIG_VMAP_STACK
+#define THREAD_ALIGN		(2 * THREAD_SIZE)
+#else
+#define THREAD_ALIGN		THREAD_SIZE
+#endif
+
+#define OVERFLOW_STACK_SIZE	SZ_4K
+
 #ifndef __ASSEMBLY__
 
 struct task_struct;
 
-#include <asm/types.h>
+DECLARE_PER_CPU(struct task_struct *, __entry_task);
 
-typedef unsigned long mm_segment_t;
+#include <asm/types.h>
+#include <asm/traps.h>
 
 struct cpu_context_save {
 	__u32	r4;
@@ -54,20 +63,11 @@ struct cpu_context_save {
 struct thread_info {
 	unsigned long		flags;		/* low level flags */
 	int			preempt_count;	/* 0 => preemptable, <0 => bug */
-	mm_segment_t		addr_limit;	/* address limit */
-	struct task_struct	*task;		/* main task structure */
 	__u32			cpu;		/* cpu */
 	__u32			cpu_domain;	/* cpu domain */
-#ifdef CONFIG_STACKPROTECTOR_PER_TASK
-	unsigned long		stack_canary;
-#endif
 	struct cpu_context_save	cpu_context;	/* cpu context */
-	__u32			syscall;	/* syscall number */
-	__u8			used_cp[16];	/* thread used copro */
+	__u32			abi_syscall;	/* ABI type and syscall nr */
 	unsigned long		tp_value[2];	/* TLS registers */
-#ifdef CONFIG_CRUNCH
-	struct crunch_state	crunchstate;
-#endif
 	union fp_state		fpstate __attribute__((aligned(8)));
 	union vfp_state		vfpstate;
 #ifdef CONFIG_ARM_THUMBEE
@@ -77,21 +77,13 @@ struct thread_info {
 
 #define INIT_THREAD_INFO(tsk)						\
 {									\
-	.task		= &tsk,						\
 	.flags		= 0,						\
 	.preempt_count	= INIT_PREEMPT_COUNT,				\
-	.addr_limit	= KERNEL_DS,					\
 }
 
-/*
- * how to get the thread information struct from C
- */
-static inline struct thread_info *current_thread_info(void) __attribute_const__;
-
-static inline struct thread_info *current_thread_info(void)
+static inline struct task_struct *thread_task(struct thread_info* ti)
 {
-	return (struct thread_info *)
-		(current_stack_pointer & ~(THREAD_SIZE - 1));
+	return (struct task_struct *)ti;
 }
 
 #define thread_saved_pc(tsk)	\
@@ -107,17 +99,27 @@ static inline struct thread_info *current_thread_info(void)
 	((unsigned long)(task_thread_info(tsk)->cpu_context.r7))
 #endif
 
-extern void crunch_task_disable(struct thread_info *);
-extern void crunch_task_copy(struct thread_info *, void *);
-extern void crunch_task_restore(struct thread_info *, void *);
-extern void crunch_task_release(struct thread_info *);
-
 extern void iwmmxt_task_disable(struct thread_info *);
 extern void iwmmxt_task_copy(struct thread_info *, void *);
 extern void iwmmxt_task_restore(struct thread_info *, void *);
 extern void iwmmxt_task_release(struct thread_info *);
 extern void iwmmxt_task_switch(struct thread_info *);
 
+extern int iwmmxt_undef_handler(struct pt_regs *, u32);
+
+static inline void register_iwmmxt_undef_handler(void)
+{
+	static struct undef_hook iwmmxt_undef_hook = {
+		.instr_mask	= 0x0c000e00,
+		.instr_val	= 0x0c000000,
+		.cpsr_mask	= MODE_MASK | PSR_T_BIT,
+		.cpsr_val	= USR_MODE,
+		.fn		= iwmmxt_undef_handler,
+	};
+
+	register_undef_hook(&iwmmxt_undef_hook);
+}
+
 extern void vfp_sync_hwstate(struct thread_info *);
 extern void vfp_flush_hwstate(struct thread_info *);
 
@@ -141,15 +143,16 @@ extern int vfp_restore_user_hwstate(struct user_vfp *,
 #define TIF_NEED_RESCHED	1	/* rescheduling necessary */
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_UPROBE		3	/* breakpointed or singlestepping */
-#define TIF_SYSCALL_TRACE	4	/* syscall trace active */
-#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
-#define TIF_SYSCALL_TRACEPOINT	6	/* syscall tracepoint instrumentation */
-#define TIF_SECCOMP		7	/* seccomp syscall filtering active */
-#define TIF_NOTIFY_SIGNAL	8	/* signal notifications exist */
+#define TIF_NOTIFY_SIGNAL	4	/* signal notifications exist */
 
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK	20
+#define TIF_RESTORE_SIGMASK	19
+#define TIF_SYSCALL_TRACE	20	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	21	/* syscall auditing active */
+#define TIF_SYSCALL_TRACEPOINT	22	/* syscall tracepoint instrumentation */
+#define TIF_SECCOMP		23	/* seccomp syscall filtering active */
+
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h
index 7c3b3671d6c2..6d1337c169cd 100644
--- a/arch/arm/include/asm/timex.h
+++ b/arch/arm/include/asm/timex.h
@@ -11,5 +11,6 @@
 
 typedef unsigned long cycles_t;
 #define get_cycles()	({ cycles_t c; read_current_timer(&c) ? 0 : c; })
+#define random_get_entropy() (((unsigned long)get_cycles()) ?: random_get_entropy_fallback())
 
 #endif
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index 24cbfc112dfa..0ccc985b90af 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -253,7 +253,7 @@ extern struct cpu_tlb_fns cpu_tlb;
  *		space.
  *		- mm	- mm_struct describing address space
  *
- *	flush_tlb_range(mm,start,end)
+ *	flush_tlb_range(vma,start,end)
  *
  *		Invalidate a range of TLB entries in the specified
  *		address space.
@@ -261,18 +261,11 @@ extern struct cpu_tlb_fns cpu_tlb;
  *		- start - start address (may not be aligned)
  *		- end	- end address (exclusive, may not be aligned)
  *
- *	flush_tlb_page(vaddr,vma)
+ *	flush_tlb_page(vma, uaddr)
  *
  *		Invalidate the specified page in the specified address range.
+ *		- vma	- vm_area_struct describing address range
  *		- vaddr - virtual address (may not be aligned)
- *		- vma	- vma_struct describing address range
- *
- *	flush_kern_tlb_page(kaddr)
- *
- *		Invalidate the TLB entry for the specified page.  The address
- *		will be in the kernels virtual memory space.  Current uses
- *		only require the D-TLB to be invalidated.
- *		- kaddr - Kernel virtual memory address
  */
 
 /*
diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h
index 5a66c3b13c92..3dcd0f71a0da 100644
--- a/arch/arm/include/asm/tls.h
+++ b/arch/arm/include/asm/tls.h
@@ -12,44 +12,59 @@
 
 	.macro switch_tls_v6k, base, tp, tpuser, tmp1, tmp2
 	mrc	p15, 0, \tmp2, c13, c0, 2	@ get the user r/w register
-	mcr	p15, 0, \tp, c13, c0, 3		@ set TLS register
-	mcr	p15, 0, \tpuser, c13, c0, 2	@ and the user r/w register
+	@ TLS register update is deferred until return to user space
+	mcr	p15, 0, \tpuser, c13, c0, 2	@ set the user r/w register
 	str	\tmp2, [\base, #TI_TP_VALUE + 4] @ save it
 	.endm
 
 	.macro switch_tls_v6, base, tp, tpuser, tmp1, tmp2
-	ldr	\tmp1, =elf_hwcap
-	ldr	\tmp1, [\tmp1, #0]
+#ifdef CONFIG_SMP
+ALT_SMP(nop)
+ALT_UP_B(.L0_\@)
+	.subsection 1
+#endif
+.L0_\@:
+	ldr_va	\tmp1, elf_hwcap
 	mov	\tmp2, #0xffff0fff
 	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
 	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
-	mrcne	p15, 0, \tmp2, c13, c0, 2	@ get the user r/w register
-	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
-	mcrne	p15, 0, \tpuser, c13, c0, 2	@ set user r/w register
-	strne	\tmp2, [\base, #TI_TP_VALUE + 4] @ save it
+	beq	.L2_\@
+	mcr	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
+#ifdef CONFIG_SMP
+	b	.L1_\@
+	.previous
+#endif
+.L1_\@: switch_tls_v6k \base, \tp, \tpuser, \tmp1, \tmp2
+.L2_\@:
 	.endm
 
 	.macro switch_tls_software, base, tp, tpuser, tmp1, tmp2
 	mov	\tmp1, #0xffff0fff
 	str	\tp, [\tmp1, #-15]		@ set TLS value at 0xffff0ff0
 	.endm
+#else
+#include <asm/smp_plat.h>
 #endif
 
 #ifdef CONFIG_TLS_REG_EMUL
 #define tls_emu		1
 #define has_tls_reg		1
+#define defer_tls_reg_update	0
 #define switch_tls	switch_tls_none
 #elif defined(CONFIG_CPU_V6)
 #define tls_emu		0
 #define has_tls_reg		(elf_hwcap & HWCAP_TLS)
+#define defer_tls_reg_update	is_smp()
 #define switch_tls	switch_tls_v6
 #elif defined(CONFIG_CPU_32v6K)
 #define tls_emu		0
 #define has_tls_reg		1
+#define defer_tls_reg_update	1
 #define switch_tls	switch_tls_v6k
 #else
 #define tls_emu		0
 #define has_tls_reg		0
+#define defer_tls_reg_update	0
 #define switch_tls	switch_tls_software
 #endif
 
@@ -78,10 +93,10 @@ static inline void set_tls(unsigned long val)
 	barrier();
 
 	if (!tls_emu) {
-		if (has_tls_reg) {
+		if (has_tls_reg && !defer_tls_reg_update) {
 			asm("mcr p15, 0, %0, c13, c0, 3"
 			    : : "r" (val));
-		} else {
+		} else if (!has_tls_reg) {
 #ifdef CONFIG_KUSER_HELPERS
 			/*
 			 * User space must never try to access this
diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h
index 470299ee2fba..c7d2510e5a78 100644
--- a/arch/arm/include/asm/topology.h
+++ b/arch/arm/include/asm/topology.h
@@ -23,7 +23,7 @@
 
 /* Replace task scheduler's default thermal pressure API */
 #define arch_scale_thermal_pressure topology_get_thermal_pressure
-#define arch_set_thermal_pressure   topology_set_thermal_pressure
+#define arch_update_thermal_pressure	topology_update_thermal_pressure
 
 #else
 
diff --git a/arch/arm/include/asm/uaccess-asm.h b/arch/arm/include/asm/uaccess-asm.h
index e6eb7a2aaf1e..6451a433912c 100644
--- a/arch/arm/include/asm/uaccess-asm.h
+++ b/arch/arm/include/asm/uaccess-asm.h
@@ -84,12 +84,8 @@
 	 * if \disable is set.
 	 */
 	.macro	uaccess_entry, tsk, tmp0, tmp1, tmp2, disable
-	ldr	\tmp1, [\tsk, #TI_ADDR_LIMIT]
-	ldr	\tmp2, =TASK_SIZE
-	str	\tmp2, [\tsk, #TI_ADDR_LIMIT]
  DACR(	mrc	p15, 0, \tmp0, c3, c0, 0)
  DACR(	str	\tmp0, [sp, #SVC_DACR])
-	str	\tmp1, [sp, #SVC_ADDR_LIMIT]
 	.if \disable && IS_ENABLED(CONFIG_CPU_SW_DOMAIN_PAN)
 	/* kernel=client, user=no access */
 	mov	\tmp2, #DACR_UACCESS_DISABLE
@@ -106,9 +102,7 @@
 
 	/* Restore the user access state previously saved by uaccess_entry */
 	.macro	uaccess_exit, tsk, tmp0, tmp1
-	ldr	\tmp1, [sp, #SVC_ADDR_LIMIT]
  DACR(	ldr	\tmp0, [sp, #SVC_DACR])
-	str	\tmp1, [\tsk, #TI_ADDR_LIMIT]
  DACR(	mcr	p15, 0, \tmp0, c3, c0, 0)
 	.endm
 
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index a13d90206472..2fcbec9c306c 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -11,6 +11,7 @@
 #include <linux/string.h>
 #include <asm/memory.h>
 #include <asm/domain.h>
+#include <asm/unaligned.h>
 #include <asm/unified.h>
 #include <asm/compiler.h>
 
@@ -52,47 +53,8 @@ static __always_inline void uaccess_restore(unsigned int flags)
 extern int __get_user_bad(void);
 extern int __put_user_bad(void);
 
-/*
- * Note that this is actually 0x1,0000,0000
- */
-#define KERNEL_DS	0x00000000
-
 #ifdef CONFIG_MMU
 
-#define USER_DS		TASK_SIZE
-#define get_fs()	(current_thread_info()->addr_limit)
-
-static inline void set_fs(mm_segment_t fs)
-{
-	current_thread_info()->addr_limit = fs;
-
-	/*
-	 * Prevent a mispredicted conditional call to set_fs from forwarding
-	 * the wrong address limit to access_ok under speculation.
-	 */
-	dsb(nsh);
-	isb();
-
-	modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
-}
-
-#define uaccess_kernel()	(get_fs() == KERNEL_DS)
-
-/*
- * We use 33-bit arithmetic here.  Success returns zero, failure returns
- * addr_limit.  We take advantage that addr_limit will be zero for KERNEL_DS,
- * so this will always return success in that case.
- */
-#define __range_ok(addr, size) ({ \
-	unsigned long flag, roksum; \
-	__chk_user_ptr(addr);	\
-	__asm__(".syntax unified\n" \
-		"adds %1, %2, %3; sbcscc %1, %1, %0; movcc %0, #0" \
-		: "=&r" (flag), "=&r" (roksum) \
-		: "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \
-		: "cc"); \
-	flag; })
-
 /*
  * This is a type: either unsigned long, if the argument fits into
  * that type, or otherwise unsigned long long.
@@ -120,7 +82,7 @@ static inline void __user *__uaccess_mask_range_ptr(const void __user *ptr,
 	"	subshs	%1, %1, %2\n"
 	"	movlo	%0, #0\n"
 	: "+r" (safe_ptr), "=&r" (tmp)
-	: "r" (size), "r" (current_thread_info()->addr_limit)
+	: "r" (size), "r" (TASK_SIZE)
 	: "cc");
 
 	csdb();
@@ -194,12 +156,13 @@ extern int __get_user_64t_4(void *);
 
 #define __get_user_check(x, p)						\
 	({								\
-		unsigned long __limit = current_thread_info()->addr_limit - 1; \
+		unsigned long __limit = TASK_SIZE - 1; \
 		register typeof(*(p)) __user *__p asm("r0") = (p);	\
 		register __inttype(x) __r2 asm("r2");			\
 		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		unsigned int __ua_flags = uaccess_save_and_enable();	\
+		int __tmp_e;						\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
 			if (sizeof((x)) >= 8)				\
@@ -227,9 +190,10 @@ extern int __get_user_64t_4(void *);
 			break;						\
 		default: __e = __get_user_bad(); break;			\
 		}							\
+		__tmp_e = __e;						\
 		uaccess_restore(__ua_flags);				\
 		x = (typeof(*(p))) __r2;				\
-		__e;							\
+		__tmp_e;						\
 	})
 
 #define get_user(x, p)							\
@@ -245,7 +209,7 @@ extern int __put_user_8(void *, unsigned long long);
 
 #define __put_user_check(__pu_val, __ptr, __err, __s)			\
 	({								\
-		unsigned long __limit = current_thread_info()->addr_limit - 1; \
+		unsigned long __limit = TASK_SIZE - 1; \
 		register typeof(__pu_val) __r2 asm("r2") = __pu_val;	\
 		register const void __user *__p asm("r0") = __ptr;	\
 		register unsigned long __l asm("r1") = __limit;		\
@@ -262,29 +226,12 @@ extern int __put_user_8(void *, unsigned long long);
 
 #else /* CONFIG_MMU */
 
-/*
- * uClinux has only one addr space, so has simplified address limits.
- */
-#define USER_DS			KERNEL_DS
-
-#define uaccess_kernel()	(true)
-#define __addr_ok(addr)		((void)(addr), 1)
-#define __range_ok(addr, size)	((void)(addr), 0)
-#define get_fs()		(KERNEL_DS)
-
-static inline void set_fs(mm_segment_t fs)
-{
-}
-
 #define get_user(x, p)	__get_user(x, p)
 #define __put_user_check __put_user_nocheck
 
 #endif /* CONFIG_MMU */
 
-#define access_ok(addr, size)	(__range_ok(addr, size) == 0)
-
-#define user_addr_max() \
-	(uaccess_kernel() ? ~0UL : get_fs())
+#include <asm-generic/access_ok.h>
 
 #ifdef CONFIG_CPU_SPECTRE
 /*
@@ -308,11 +255,11 @@ static inline void set_fs(mm_segment_t fs)
 #define __get_user(x, ptr)						\
 ({									\
 	long __gu_err = 0;						\
-	__get_user_err((x), (ptr), __gu_err);				\
+	__get_user_err((x), (ptr), __gu_err, TUSER());			\
 	__gu_err;							\
 })
 
-#define __get_user_err(x, ptr, err)					\
+#define __get_user_err(x, ptr, err, __t)				\
 do {									\
 	unsigned long __gu_addr = (unsigned long)(ptr);			\
 	unsigned long __gu_val;						\
@@ -321,18 +268,19 @@ do {									\
 	might_fault();							\
 	__ua_flags = uaccess_save_and_enable();				\
 	switch (sizeof(*(ptr))) {					\
-	case 1:	__get_user_asm_byte(__gu_val, __gu_addr, err);	break;	\
-	case 2:	__get_user_asm_half(__gu_val, __gu_addr, err);	break;	\
-	case 4:	__get_user_asm_word(__gu_val, __gu_addr, err);	break;	\
+	case 1:	__get_user_asm_byte(__gu_val, __gu_addr, err, __t); break;	\
+	case 2:	__get_user_asm_half(__gu_val, __gu_addr, err, __t); break;	\
+	case 4:	__get_user_asm_word(__gu_val, __gu_addr, err, __t); break;	\
 	default: (__gu_val) = __get_user_bad();				\
 	}								\
 	uaccess_restore(__ua_flags);					\
 	(x) = (__typeof__(*(ptr)))__gu_val;				\
 } while (0)
+#endif
 
 #define __get_user_asm(x, addr, err, instr)			\
 	__asm__ __volatile__(					\
-	"1:	" TUSER(instr) " %1, [%2], #0\n"		\
+	"1:	" instr " %1, [%2], #0\n"			\
 	"2:\n"							\
 	"	.pushsection .text.fixup,\"ax\"\n"		\
 	"	.align	2\n"					\
@@ -348,40 +296,38 @@ do {									\
 	: "r" (addr), "i" (-EFAULT)				\
 	: "cc")
 
-#define __get_user_asm_byte(x, addr, err)			\
-	__get_user_asm(x, addr, err, ldrb)
+#define __get_user_asm_byte(x, addr, err, __t)			\
+	__get_user_asm(x, addr, err, "ldrb" __t)
 
 #if __LINUX_ARM_ARCH__ >= 6
 
-#define __get_user_asm_half(x, addr, err)			\
-	__get_user_asm(x, addr, err, ldrh)
+#define __get_user_asm_half(x, addr, err, __t)			\
+	__get_user_asm(x, addr, err, "ldrh" __t)
 
 #else
 
 #ifndef __ARMEB__
-#define __get_user_asm_half(x, __gu_addr, err)			\
+#define __get_user_asm_half(x, __gu_addr, err, __t)		\
 ({								\
 	unsigned long __b1, __b2;				\
-	__get_user_asm_byte(__b1, __gu_addr, err);		\
-	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
+	__get_user_asm_byte(__b1, __gu_addr, err, __t);		\
+	__get_user_asm_byte(__b2, __gu_addr + 1, err, __t);	\
 	(x) = __b1 | (__b2 << 8);				\
 })
 #else
-#define __get_user_asm_half(x, __gu_addr, err)			\
+#define __get_user_asm_half(x, __gu_addr, err, __t)		\
 ({								\
 	unsigned long __b1, __b2;				\
-	__get_user_asm_byte(__b1, __gu_addr, err);		\
-	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
+	__get_user_asm_byte(__b1, __gu_addr, err, __t);		\
+	__get_user_asm_byte(__b2, __gu_addr + 1, err, __t);	\
 	(x) = (__b1 << 8) | __b2;				\
 })
 #endif
 
 #endif /* __LINUX_ARM_ARCH__ >= 6 */
 
-#define __get_user_asm_word(x, addr, err)			\
-	__get_user_asm(x, addr, err, ldr)
-#endif
-
+#define __get_user_asm_word(x, addr, err, __t)			\
+	__get_user_asm(x, addr, err, "ldr" __t)
 
 #define __put_user_switch(x, ptr, __err, __fn)				\
 	do {								\
@@ -425,7 +371,7 @@ do {									\
 #define __put_user_nocheck(x, __pu_ptr, __err, __size)			\
 	do {								\
 		unsigned long __pu_addr = (unsigned long)__pu_ptr;	\
-		__put_user_nocheck_##__size(x, __pu_addr, __err);	\
+		__put_user_nocheck_##__size(x, __pu_addr, __err, TUSER());\
 	} while (0)
 
 #define __put_user_nocheck_1 __put_user_asm_byte
@@ -433,9 +379,11 @@ do {									\
 #define __put_user_nocheck_4 __put_user_asm_word
 #define __put_user_nocheck_8 __put_user_asm_dword
 
+#endif /* !CONFIG_CPU_SPECTRE */
+
 #define __put_user_asm(x, __pu_addr, err, instr)		\
 	__asm__ __volatile__(					\
-	"1:	" TUSER(instr) " %1, [%2], #0\n"		\
+	"1:	" instr " %1, [%2], #0\n"		\
 	"2:\n"							\
 	"	.pushsection .text.fixup,\"ax\"\n"		\
 	"	.align	2\n"					\
@@ -450,36 +398,36 @@ do {									\
 	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
 	: "cc")
 
-#define __put_user_asm_byte(x, __pu_addr, err)			\
-	__put_user_asm(x, __pu_addr, err, strb)
+#define __put_user_asm_byte(x, __pu_addr, err, __t)		\
+	__put_user_asm(x, __pu_addr, err, "strb" __t)
 
 #if __LINUX_ARM_ARCH__ >= 6
 
-#define __put_user_asm_half(x, __pu_addr, err)			\
-	__put_user_asm(x, __pu_addr, err, strh)
+#define __put_user_asm_half(x, __pu_addr, err, __t)		\
+	__put_user_asm(x, __pu_addr, err, "strh" __t)
 
 #else
 
 #ifndef __ARMEB__
-#define __put_user_asm_half(x, __pu_addr, err)			\
+#define __put_user_asm_half(x, __pu_addr, err, __t)		\
 ({								\
 	unsigned long __temp = (__force unsigned long)(x);	\
-	__put_user_asm_byte(__temp, __pu_addr, err);		\
-	__put_user_asm_byte(__temp >> 8, __pu_addr + 1, err);	\
+	__put_user_asm_byte(__temp, __pu_addr, err, __t);	\
+	__put_user_asm_byte(__temp >> 8, __pu_addr + 1, err, __t);\
 })
 #else
-#define __put_user_asm_half(x, __pu_addr, err)			\
+#define __put_user_asm_half(x, __pu_addr, err, __t)		\
 ({								\
 	unsigned long __temp = (__force unsigned long)(x);	\
-	__put_user_asm_byte(__temp >> 8, __pu_addr, err);	\
-	__put_user_asm_byte(__temp, __pu_addr + 1, err);	\
+	__put_user_asm_byte(__temp >> 8, __pu_addr, err, __t);	\
+	__put_user_asm_byte(__temp, __pu_addr + 1, err, __t);	\
 })
 #endif
 
 #endif /* __LINUX_ARM_ARCH__ >= 6 */
 
-#define __put_user_asm_word(x, __pu_addr, err)			\
-	__put_user_asm(x, __pu_addr, err, str)
+#define __put_user_asm_word(x, __pu_addr, err, __t)		\
+	__put_user_asm(x, __pu_addr, err, "str" __t)
 
 #ifndef __ARMEB__
 #define	__reg_oper0	"%R2"
@@ -489,12 +437,12 @@ do {									\
 #define	__reg_oper1	"%R2"
 #endif
 
-#define __put_user_asm_dword(x, __pu_addr, err)			\
+#define __put_user_asm_dword(x, __pu_addr, err, __t)		\
 	__asm__ __volatile__(					\
- ARM(	"1:	" TUSER(str) "	" __reg_oper1 ", [%1], #4\n"	) \
- ARM(	"2:	" TUSER(str) "	" __reg_oper0 ", [%1]\n"	) \
- THUMB(	"1:	" TUSER(str) "	" __reg_oper1 ", [%1]\n"	) \
- THUMB(	"2:	" TUSER(str) "	" __reg_oper0 ", [%1, #4]\n"	) \
+ ARM(	"1:	str" __t "	" __reg_oper1 ", [%1], #4\n"  ) \
+ ARM(	"2:	str" __t "	" __reg_oper0 ", [%1]\n"      ) \
+ THUMB(	"1:	str" __t "	" __reg_oper1 ", [%1]\n"      ) \
+ THUMB(	"2:	str" __t "	" __reg_oper0 ", [%1, #4]\n"  ) \
 	"3:\n"							\
 	"	.pushsection .text.fixup,\"ax\"\n"		\
 	"	.align	2\n"					\
@@ -510,7 +458,52 @@ do {									\
 	: "r" (x), "i" (-EFAULT)				\
 	: "cc")
 
-#endif /* !CONFIG_CPU_SPECTRE */
+#define __get_kernel_nofault(dst, src, type, err_label)			\
+do {									\
+	const type *__pk_ptr = (src);					\
+	unsigned long __src = (unsigned long)(__pk_ptr);		\
+	type __val;							\
+	int __err = 0;							\
+	switch (sizeof(type)) {						\
+	case 1:	__get_user_asm_byte(__val, __src, __err, ""); break;	\
+	case 2: __get_user_asm_half(__val, __src, __err, ""); break;	\
+	case 4: __get_user_asm_word(__val, __src, __err, ""); break;	\
+	case 8: {							\
+		u32 *__v32 = (u32*)&__val;				\
+		__get_user_asm_word(__v32[0], __src, __err, "");	\
+		if (__err)						\
+			break;						\
+		__get_user_asm_word(__v32[1], __src+4, __err, "");	\
+		break;							\
+	}								\
+	default: __err = __get_user_bad(); break;			\
+	}								\
+	if (IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS))		\
+		put_unaligned(__val, (type *)(dst));			\
+	else								\
+		*(type *)(dst) = __val; /* aligned by caller */		\
+	if (__err)							\
+		goto err_label;						\
+} while (0)
+
+#define __put_kernel_nofault(dst, src, type, err_label)			\
+do {									\
+	const type *__pk_ptr = (dst);					\
+	unsigned long __dst = (unsigned long)__pk_ptr;			\
+	int __err = 0;							\
+	type __val = IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)	\
+		     ? get_unaligned((type *)(src))			\
+		     : *(type *)(src);	/* aligned by caller */		\
+	switch (sizeof(type)) {						\
+	case 1: __put_user_asm_byte(__val, __dst, __err, ""); break;	\
+	case 2:	__put_user_asm_half(__val, __dst, __err, ""); break;	\
+	case 4:	__put_user_asm_word(__val, __dst, __err, ""); break;	\
+	case 8:	__put_user_asm_dword(__val, __dst, __err, ""); break;	\
+	default: __err = __put_user_bad(); break;			\
+	}								\
+	if (__err)							\
+		goto err_label;						\
+} while (0)
 
 #ifdef CONFIG_MMU
 extern unsigned long __must_check
diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h
index 5c5e62cb304b..4048c92d9c2b 100644
--- a/arch/arm/include/asm/ucontext.h
+++ b/arch/arm/include/asm/ucontext.h
@@ -43,17 +43,6 @@ struct ucontext {
  */
 #define DUMMY_MAGIC		0xb0d9ed01
 
-#ifdef CONFIG_CRUNCH
-#define CRUNCH_MAGIC		0x5065cf03
-#define CRUNCH_STORAGE_SIZE	(CRUNCH_SIZE + 8)
-
-struct crunch_sigframe {
-	unsigned long	magic;
-	unsigned long	size;
-	struct crunch_state	storage;
-} __attribute__((__aligned__(8)));
-#endif
-
 #ifdef CONFIG_IWMMXT
 /* iwmmxt_area is 0x98 bytes long, preceded by 8 bytes of signature */
 #define IWMMXT_MAGIC		0x12ef842a
@@ -92,9 +81,6 @@ struct vfp_sigframe
  * one of these.
  */
 struct aux_sigframe {
-#ifdef CONFIG_CRUNCH
-	struct crunch_sigframe	crunch;
-#endif
 #ifdef CONFIG_IWMMXT
 	struct iwmmxt_sigframe	iwmmxt;
 #endif
diff --git a/arch/arm/include/asm/unaligned.h b/arch/arm/include/asm/unaligned.h
deleted file mode 100644
index ab905ffcf193..000000000000
--- a/arch/arm/include/asm/unaligned.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef __ASM_ARM_UNALIGNED_H
-#define __ASM_ARM_UNALIGNED_H
-
-/*
- * We generally want to set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on ARMv6+,
- * but we don't want to use linux/unaligned/access_ok.h since that can lead
- * to traps on unaligned stm/ldm or strd/ldrd.
- */
-#include <asm/byteorder.h>
-
-#if defined(__LITTLE_ENDIAN)
-# include <linux/unaligned/le_struct.h>
-# include <linux/unaligned/be_byteshift.h>
-# include <linux/unaligned/generic.h>
-# define get_unaligned	__get_unaligned_le
-# define put_unaligned	__put_unaligned_le
-#elif defined(__BIG_ENDIAN)
-# include <linux/unaligned/be_struct.h>
-# include <linux/unaligned/le_byteshift.h>
-# include <linux/unaligned/generic.h>
-# define get_unaligned	__get_unaligned_be
-# define put_unaligned	__put_unaligned_be
-#else
-# error need to define endianess
-#endif
-
-#endif /* __ASM_ARM_UNALIGNED_H */
diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h
index 1e2c3eb04353..ce9689118dbb 100644
--- a/arch/arm/include/asm/unified.h
+++ b/arch/arm/include/asm/unified.h
@@ -24,10 +24,6 @@ __asm__(".syntax unified");
 
 #ifdef CONFIG_THUMB2_KERNEL
 
-#if __GNUC__ < 4
-#error Thumb-2 kernel requires gcc >= 4
-#endif
-
 /* The CPSR bit describing the instruction set (Thumb) */
 #define PSR_ISETSTATE	PSR_T_BIT
 
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index 0f8a3439902d..b51f85417f58 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -24,6 +24,7 @@ struct unwind_idx {
 
 struct unwind_table {
 	struct list_head list;
+	struct list_head mod_list;
 	const struct unwind_idx *start;
 	const struct unwind_idx *origin;
 	const struct unwind_idx *stop;
diff --git a/arch/arm/include/asm/user.h b/arch/arm/include/asm/user.h
index c799a3c49342..167d44b550f4 100644
--- a/arch/arm/include/asm/user.h
+++ b/arch/arm/include/asm/user.h
@@ -77,10 +77,6 @@ struct user{
   struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */
   				/* the FP registers. */
 };
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
 
 /*
  * User specific VFP registers. If only VFPv2 is present, registers 16 to 31
diff --git a/arch/arm/include/asm/v7m.h b/arch/arm/include/asm/v7m.h
index 2cb00d15831b..4512f7e1918f 100644
--- a/arch/arm/include/asm/v7m.h
+++ b/arch/arm/include/asm/v7m.h
@@ -13,6 +13,7 @@
 #define V7M_SCB_ICSR_PENDSVSET			(1 << 28)
 #define V7M_SCB_ICSR_PENDSVCLR			(1 << 27)
 #define V7M_SCB_ICSR_RETTOBASE			(1 << 11)
+#define V7M_SCB_ICSR_VECTACTIVE			0x000001ff
 
 #define V7M_SCB_VTOR			0x08
 
@@ -38,7 +39,7 @@
 #define V7M_SCB_SHCSR_MEMFAULTENA		(1 << 16)
 
 #define V7M_xPSR_FRAMEPTRALIGN			0x00000200
-#define V7M_xPSR_EXCEPTIONNO			0x000001ff
+#define V7M_xPSR_EXCEPTIONNO			V7M_SCB_ICSR_VECTACTIVE
 
 /*
  * When branching to an address that has bits [31:28] == 0xf an exception return
diff --git a/arch/arm/include/asm/vfp.h b/arch/arm/include/asm/vfp.h
index 19928bfb4f9c..157ea3426158 100644
--- a/arch/arm/include/asm/vfp.h
+++ b/arch/arm/include/asm/vfp.h
@@ -87,6 +87,12 @@
 #define MVFR0_DP_BIT		(8)
 #define MVFR0_DP_MASK		(0xf << MVFR0_DP_BIT)
 
+/* MVFR1 bits */
+#define MVFR1_ASIMDHP_BIT	(20)
+#define MVFR1_ASIMDHP_MASK	(0xf << MVFR1_ASIMDHP_BIT)
+#define MVFR1_FPHP_BIT		(24)
+#define MVFR1_FPHP_MASK		(0xf << MVFR1_FPHP_BIT)
+
 /* Bit patterns for decoding the packaged operation descriptors */
 #define VFPOPDESC_LENGTH_BIT	(9)
 #define VFPOPDESC_LENGTH_MASK	(0x07 << VFPOPDESC_LENGTH_BIT)
diff --git a/arch/arm/include/asm/vmlinux.lds.h b/arch/arm/include/asm/vmlinux.lds.h
index 4a91428c324d..4c8632d5c432 100644
--- a/arch/arm/include/asm/vmlinux.lds.h
+++ b/arch/arm/include/asm/vmlinux.lds.h
@@ -26,6 +26,19 @@
 #define ARM_MMU_DISCARD(x)	x
 #endif
 
+/*
+ * ld.lld does not support NOCROSSREFS:
+ * https://github.com/ClangBuiltLinux/linux/issues/1609
+ */
+#ifdef CONFIG_LD_IS_LLD
+#define NOCROSSREFS
+#endif
+
+/* Set start/end symbol names to the LMA for the section */
+#define ARM_LMA(sym, section)						\
+	sym##_start = LOADADDR(section);				\
+	sym##_end = LOADADDR(section) + SIZEOF(section)
+
 #define PROC_INFO							\
 		. = ALIGN(4);						\
 		__proc_info_begin = .;					\
@@ -83,7 +96,6 @@
 		SOFTIRQENTRY_TEXT					\
 		TEXT_TEXT						\
 		SCHED_TEXT						\
-		CPUIDLE_TEXT						\
 		LOCK_TEXT						\
 		KPROBES_TEXT						\
 		ARM_STUBS_TEXT						\
@@ -110,19 +122,31 @@
  * only thing that matters is their relative offsets
  */
 #define ARM_VECTORS							\
-	__vectors_start = .;						\
-	.vectors 0xffff0000 : AT(__vectors_start) {			\
-		*(.vectors)						\
+	__vectors_lma = .;						\
+	OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) {		\
+		.vectors {						\
+			*(.vectors)					\
+		}							\
+		.vectors.bhb.loop8 {					\
+			*(.vectors.bhb.loop8)				\
+		}							\
+		.vectors.bhb.bpiall {					\
+			*(.vectors.bhb.bpiall)				\
+		}							\
 	}								\
-	. = __vectors_start + SIZEOF(.vectors);				\
-	__vectors_end = .;						\
+	ARM_LMA(__vectors, .vectors);					\
+	ARM_LMA(__vectors_bhb_loop8, .vectors.bhb.loop8);		\
+	ARM_LMA(__vectors_bhb_bpiall, .vectors.bhb.bpiall);		\
+	. = __vectors_lma + SIZEOF(.vectors) +				\
+		SIZEOF(.vectors.bhb.loop8) +				\
+		SIZEOF(.vectors.bhb.bpiall);				\
 									\
-	__stubs_start = .;						\
-	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {		\
+	__stubs_lma = .;						\
+	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_lma) {		\
 		*(.stubs)						\
 	}								\
-	. = __stubs_start + SIZEOF(.stubs);				\
-	__stubs_end = .;						\
+	ARM_LMA(__stubs, .stubs);					\
+	. = __stubs_lma + SIZEOF(.stubs);				\
 									\
 	PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors));
 
diff --git a/arch/arm/include/asm/xen/page-coherent.h b/arch/arm/include/asm/xen/page-coherent.h
deleted file mode 100644
index 27e984977402..000000000000
--- a/arch/arm/include/asm/xen/page-coherent.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <xen/arm/page-coherent.h>
diff --git a/arch/arm/include/asm/xen/swiotlb-xen.h b/arch/arm/include/asm/xen/swiotlb-xen.h
new file mode 100644
index 000000000000..455ade5d5320
--- /dev/null
+++ b/arch/arm/include/asm/xen/swiotlb-xen.h
@@ -0,0 +1 @@
+#include <xen/arm/swiotlb-xen.h>
diff --git a/arch/arm/include/asm/xen/xen-ops.h b/arch/arm/include/asm/xen/xen-ops.h
new file mode 100644
index 000000000000..7ebb7eb0bd93
--- /dev/null
+++ b/arch/arm/include/asm/xen/xen-ops.h
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <xen/arm/xen-ops.h>
diff --git a/arch/arm/include/asm/xor.h b/arch/arm/include/asm/xor.h
index aefddec79286..934b549905f5 100644
--- a/arch/arm/include/asm/xor.h
+++ b/arch/arm/include/asm/xor.h
@@ -44,13 +44,14 @@
 		: "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4))
 
 static void
-xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+xor_arm4regs_2(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2)
 {
 	unsigned int lines = bytes / sizeof(unsigned long) / 4;
 	register unsigned int a1 __asm__("r4");
 	register unsigned int a2 __asm__("r5");
 	register unsigned int a3 __asm__("r6");
-	register unsigned int a4 __asm__("r7");
+	register unsigned int a4 __asm__("r10");
 	register unsigned int b1 __asm__("r8");
 	register unsigned int b2 __asm__("r9");
 	register unsigned int b3 __asm__("ip");
@@ -64,14 +65,15 @@ xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 }
 
 static void
-xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3)
+xor_arm4regs_3(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2,
+	       const unsigned long * __restrict p3)
 {
 	unsigned int lines = bytes / sizeof(unsigned long) / 4;
 	register unsigned int a1 __asm__("r4");
 	register unsigned int a2 __asm__("r5");
 	register unsigned int a3 __asm__("r6");
-	register unsigned int a4 __asm__("r7");
+	register unsigned int a4 __asm__("r10");
 	register unsigned int b1 __asm__("r8");
 	register unsigned int b2 __asm__("r9");
 	register unsigned int b3 __asm__("ip");
@@ -86,8 +88,10 @@ xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4)
+xor_arm4regs_4(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2,
+	       const unsigned long * __restrict p3,
+	       const unsigned long * __restrict p4)
 {
 	unsigned int lines = bytes / sizeof(unsigned long) / 2;
 	register unsigned int a1 __asm__("r8");
@@ -105,8 +109,11 @@ xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4, unsigned long *p5)
+xor_arm4regs_5(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2,
+	       const unsigned long * __restrict p3,
+	       const unsigned long * __restrict p4,
+	       const unsigned long * __restrict p5)
 {
 	unsigned int lines = bytes / sizeof(unsigned long) / 2;
 	register unsigned int a1 __asm__("r8");
@@ -146,7 +153,8 @@ static struct xor_block_template xor_block_arm4regs = {
 extern struct xor_block_template const xor_block_neon_inner;
 
 static void
-xor_neon_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+xor_neon_2(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2)
 {
 	if (in_interrupt()) {
 		xor_arm4regs_2(bytes, p1, p2);
@@ -158,8 +166,9 @@ xor_neon_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 }
 
 static void
-xor_neon_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3)
+xor_neon_3(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2,
+	   const unsigned long * __restrict p3)
 {
 	if (in_interrupt()) {
 		xor_arm4regs_3(bytes, p1, p2, p3);
@@ -171,8 +180,10 @@ xor_neon_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_neon_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4)
+xor_neon_4(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2,
+	   const unsigned long * __restrict p3,
+	   const unsigned long * __restrict p4)
 {
 	if (in_interrupt()) {
 		xor_arm4regs_4(bytes, p1, p2, p3, p4);
@@ -184,8 +195,11 @@ xor_neon_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_neon_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4, unsigned long *p5)
+xor_neon_5(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2,
+	   const unsigned long * __restrict p3,
+	   const unsigned long * __restrict p4,
+	   const unsigned long * __restrict p5)
 {
 	if (in_interrupt()) {
 		xor_arm4regs_5(bytes, p1, p2, p3, p4, p5);
diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
index f684e3a815f6..f6175e6e28cd 100644
--- a/arch/arm/include/debug/brcmstb.S
+++ b/arch/arm/include/debug/brcmstb.S
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2016 Broadcom
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2016 Broadcom */
 #include <linux/serial_reg.h>
 #include <asm/cputype.h>
 
diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h
index c8eb83d4b896..3edbb3c5b42b 100644
--- a/arch/arm/include/debug/imx-uart.h
+++ b/arch/arm/include/debug/imx-uart.h
@@ -11,13 +11,6 @@
 #define IMX1_UART_BASE_ADDR(n)	IMX1_UART##n##_BASE_ADDR
 #define IMX1_UART_BASE(n)	IMX1_UART_BASE_ADDR(n)
 
-#define IMX21_UART1_BASE_ADDR	0x1000a000
-#define IMX21_UART2_BASE_ADDR	0x1000b000
-#define IMX21_UART3_BASE_ADDR	0x1000c000
-#define IMX21_UART4_BASE_ADDR	0x1000d000
-#define IMX21_UART_BASE_ADDR(n)	IMX21_UART##n##_BASE_ADDR
-#define IMX21_UART_BASE(n)	IMX21_UART_BASE_ADDR(n)
-
 #define IMX25_UART1_BASE_ADDR	0x43f90000
 #define IMX25_UART2_BASE_ADDR	0x43f94000
 #define IMX25_UART3_BASE_ADDR	0x5000c000
@@ -26,6 +19,13 @@
 #define IMX25_UART_BASE_ADDR(n)	IMX25_UART##n##_BASE_ADDR
 #define IMX25_UART_BASE(n)	IMX25_UART_BASE_ADDR(n)
 
+#define IMX27_UART1_BASE_ADDR	0x1000a000
+#define IMX27_UART2_BASE_ADDR	0x1000b000
+#define IMX27_UART3_BASE_ADDR	0x1000c000
+#define IMX27_UART4_BASE_ADDR	0x1000d000
+#define IMX27_UART_BASE_ADDR(n)	IMX27_UART##n##_BASE_ADDR
+#define IMX27_UART_BASE(n)	IMX27_UART_BASE_ADDR(n)
+
 #define IMX31_UART1_BASE_ADDR	0x43f90000
 #define IMX31_UART2_BASE_ADDR	0x43f94000
 #define IMX31_UART3_BASE_ADDR	0x5000c000
@@ -112,10 +112,10 @@
 
 #ifdef CONFIG_DEBUG_IMX1_UART
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX1)
-#elif defined(CONFIG_DEBUG_IMX21_IMX27_UART)
-#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX21)
 #elif defined(CONFIG_DEBUG_IMX25_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX25)
+#elif defined(CONFIG_DEBUG_IMX27_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX27)
 #elif defined(CONFIG_DEBUG_IMX31_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX31)
 #elif defined(CONFIG_DEBUG_IMX35_UART)
diff --git a/arch/arm/include/debug/pl01x.S b/arch/arm/include/debug/pl01x.S
index 0c7bfa4c10db..c7e02d0628bf 100644
--- a/arch/arm/include/debug/pl01x.S
+++ b/arch/arm/include/debug/pl01x.S
@@ -8,13 +8,6 @@
 */
 #include <linux/amba/serial.h>
 
-#ifdef CONFIG_DEBUG_ZTE_ZX
-#undef UART01x_DR
-#undef UART01x_FR
-#define UART01x_DR     0x04
-#define UART01x_FR     0x14
-#endif
-
 #ifdef CONFIG_DEBUG_UART_PHYS
 		.macro	addruart, rp, rv, tmp
 		ldr	\rp, =CONFIG_DEBUG_UART_PHYS
diff --git a/arch/arm/include/debug/s3c24xx.S b/arch/arm/include/debug/s3c24xx.S
index af873b526677..7ab5e577cd42 100644
--- a/arch/arm/include/debug/s3c24xx.S
+++ b/arch/arm/include/debug/s3c24xx.S
@@ -28,16 +28,6 @@
 		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
 	.endm
 
-/* Select the correct implementation depending on the configuration. The
- * S3C2440 will get selected by default, as these are the most widely
- * used variants of these
-*/
-
-#if defined(CONFIG_DEBUG_S3C2410_UART)
-#define fifo_full  fifo_full_s3c2410
-#define fifo_level fifo_level_s3c2410
-#endif
-
 /* include the reset of the code which will do the work */
 
 #include <debug/samsung.S>
diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild
index ce8573157774..63748af8bc9d 100644
--- a/arch/arm/include/uapi/asm/Kbuild
+++ b/arch/arm/include/uapi/asm/Kbuild
@@ -1,6 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 
-generated-y += unistd-common.h
 generated-y += unistd-oabi.h
 generated-y += unistd-eabi.h
 generic-y += kvm_para.h
diff --git a/arch/arm/include/uapi/asm/hwcap.h b/arch/arm/include/uapi/asm/hwcap.h
index b5971dfa4b8c..6b2023e39b6f 100644
--- a/arch/arm/include/uapi/asm/hwcap.h
+++ b/arch/arm/include/uapi/asm/hwcap.h
@@ -15,7 +15,7 @@
 #define HWCAP_EDSP	(1 << 7)
 #define HWCAP_JAVA	(1 << 8)
 #define HWCAP_IWMMXT	(1 << 9)
-#define HWCAP_CRUNCH	(1 << 10)
+#define HWCAP_CRUNCH	(1 << 10)	/* Obsolete */
 #define HWCAP_THUMBEE	(1 << 11)
 #define HWCAP_NEON	(1 << 12)
 #define HWCAP_VFPv3	(1 << 13)
@@ -28,6 +28,12 @@
 #define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
 #define HWCAP_LPAE	(1 << 20)
 #define HWCAP_EVTSTRM	(1 << 21)
+#define HWCAP_FPHP	(1 << 22)
+#define HWCAP_ASIMDHP	(1 << 23)
+#define HWCAP_ASIMDDP	(1 << 24)
+#define HWCAP_ASIMDFHM	(1 << 25)
+#define HWCAP_ASIMDBF16	(1 << 26)
+#define HWCAP_I8MM	(1 << 27)
 
 /*
  * HWCAP2 flags - for elf_hwcap2 (in kernel) and AT_HWCAP2
@@ -37,5 +43,7 @@
 #define HWCAP2_SHA1	(1 << 2)
 #define HWCAP2_SHA2	(1 << 3)
 #define HWCAP2_CRC32	(1 << 4)
+#define HWCAP2_SB	(1 << 5)
+#define HWCAP2_SSBS	(1 << 6)
 
 #endif /* _UAPI__ASMARM_HWCAP_H */
diff --git a/arch/arm/include/uapi/asm/ptrace.h b/arch/arm/include/uapi/asm/ptrace.h
index e61c65b4018d..8896c23ccba7 100644
--- a/arch/arm/include/uapi/asm/ptrace.h
+++ b/arch/arm/include/uapi/asm/ptrace.h
@@ -26,8 +26,8 @@
 #define PTRACE_GET_THREAD_AREA	22
 #define PTRACE_SET_SYSCALL	23
 /* PTRACE_SYSCALL is 24 */
-#define PTRACE_GETCRUNCHREGS	25
-#define PTRACE_SETCRUNCHREGS	26
+#define PTRACE_GETCRUNCHREGS	25 /* obsolete */
+#define PTRACE_SETCRUNCHREGS	26 /* obsolete */
 #define PTRACE_GETVFPREGS	27
 #define PTRACE_SETVFPREGS	28
 #define PTRACE_GETHBPREGS	29
diff --git a/arch/arm/include/uapi/asm/signal.h b/arch/arm/include/uapi/asm/signal.h
index c9a3ea1d8d41..9e2178420db2 100644
--- a/arch/arm/include/uapi/asm/signal.h
+++ b/arch/arm/include/uapi/asm/signal.h
@@ -93,7 +93,7 @@ struct sigaction {
 typedef struct sigaltstack {
 	void __user *ss_sp;
 	int ss_flags;
-	size_t ss_size;
+	__kernel_size_t ss_size;
 } stack_t;
 
 
diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h
index 93ecf8aa4fe5..a1149911464c 100644
--- a/arch/arm/include/uapi/asm/unistd.h
+++ b/arch/arm/include/uapi/asm/unistd.h
@@ -15,6 +15,7 @@
 #define _UAPI__ASM_ARM_UNISTD_H
 
 #define __NR_OABI_SYSCALL_BASE	0x900000
+#define __NR_SYSCALL_MASK	0x0fffff
 
 #if defined(__thumb__) || defined(__ARM_EABI__)
 #define __NR_SYSCALL_BASE	0
@@ -24,7 +25,6 @@
 #include <asm/unistd-oabi.h>
 #endif
 
-#include <asm/unistd-common.h>
 #define __NR_sync_file_range2		__NR_arm_sync_file_range
 
 /*
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index ae295a3bcfef..d53f56d6f840 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -10,6 +10,7 @@ ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_insn.o = -pg
 CFLAGS_REMOVE_patch.o = -pg
+CFLAGS_REMOVE_unwind.o = -pg
 endif
 
 CFLAGS_REMOVE_return_address.o = -pg
@@ -44,7 +45,6 @@ obj-$(CONFIG_ISA_DMA_API)	+= dma.o
 obj-$(CONFIG_FIQ)		+= fiq.o fiqasm.o
 obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARM_MODULE_PLTS)	+= module-plts.o
-obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_ARM_CPU_SUSPEND)	+= sleep.o suspend.o
 obj-$(CONFIG_HIBERNATION)	+= hibernate.o
@@ -70,7 +70,6 @@ obj-$(CONFIG_HAVE_TCM)		+= tcm.o
 obj-$(CONFIG_OF)		+= devtree.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_SWP_EMULATE)	+= swp_emulate.o
-CFLAGS_swp_emulate.o		:= -Wa,-march=armv7-a
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 
 obj-$(CONFIG_CPU_XSCALE)	+= xscale-cp0.o
@@ -88,7 +87,7 @@ obj-$(CONFIG_VDSO)		+= vdso.o
 obj-$(CONFIG_EFI)		+= efi.o
 obj-$(CONFIG_PARAVIRT)	+= paravirt.o
 
-head-y			:= head$(MMUEXT).o
+obj-y			+= head$(MMUEXT).o
 obj-$(CONFIG_DEBUG_LL)	+= debug.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_ARM_PATCH_PHYS_VIRT)	+= phys2virt.o
@@ -99,11 +98,12 @@ CFLAGS_head-inflate-data.o := $(call cc-option,-Wframe-larger-than=10240)
 obj-$(CONFIG_XIP_DEFLATED_DATA) += head-inflate-data.o
 
 obj-$(CONFIG_ARM_VIRT_EXT)	+= hyp-stub.o
-AFLAGS_hyp-stub.o		:=-Wa,-march=armv7-a
 ifeq ($(CONFIG_ARM_PSCI),y)
 obj-$(CONFIG_SMP)		+= psci_smp.o
 endif
 
 obj-$(CONFIG_HAVE_ARM_SMCCC)	+= smccc-call.o
 
-extra-y := $(head-y) vmlinux.lds
+obj-$(CONFIG_GENERIC_CPU_VULNERABILITIES) += spectre.o
+
+extra-y := vmlinux.lds
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index be8050b0c3df..f9c7111c1d65 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -24,6 +24,7 @@
 #include <asm/vdso_datapage.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <linux/kbuild.h>
+#include <linux/arm-smccc.h>
 #include "signal.h"
 
 /*
@@ -42,12 +43,10 @@ int main(void)
   BLANK();
   DEFINE(TI_FLAGS,		offsetof(struct thread_info, flags));
   DEFINE(TI_PREEMPT,		offsetof(struct thread_info, preempt_count));
-  DEFINE(TI_ADDR_LIMIT,		offsetof(struct thread_info, addr_limit));
-  DEFINE(TI_TASK,		offsetof(struct thread_info, task));
   DEFINE(TI_CPU,		offsetof(struct thread_info, cpu));
   DEFINE(TI_CPU_DOMAIN,		offsetof(struct thread_info, cpu_domain));
   DEFINE(TI_CPU_SAVE,		offsetof(struct thread_info, cpu_context));
-  DEFINE(TI_USED_CP,		offsetof(struct thread_info, used_cp));
+  DEFINE(TI_ABI_SYSCALL,	offsetof(struct thread_info, abi_syscall));
   DEFINE(TI_TP_VALUE,		offsetof(struct thread_info, tp_value));
   DEFINE(TI_FPSTATE,		offsetof(struct thread_info, fpstate));
 #ifdef CONFIG_VFP
@@ -56,19 +55,13 @@ int main(void)
   DEFINE(VFP_CPU,		offsetof(union vfp_state, hard.cpu));
 #endif
 #endif
+  DEFINE(SOFTIRQ_DISABLE_OFFSET,SOFTIRQ_DISABLE_OFFSET);
 #ifdef CONFIG_ARM_THUMBEE
   DEFINE(TI_THUMBEE_STATE,	offsetof(struct thread_info, thumbee_state));
 #endif
 #ifdef CONFIG_IWMMXT
   DEFINE(TI_IWMMXT_STATE,	offsetof(struct thread_info, fpstate.iwmmxt));
 #endif
-#ifdef CONFIG_CRUNCH
-  DEFINE(TI_CRUNCH_STATE,	offsetof(struct thread_info, crunchstate));
-#endif
-#ifdef CONFIG_STACKPROTECTOR_PER_TASK
-  DEFINE(TI_STACK_CANARY,	offsetof(struct thread_info, stack_canary));
-#endif
-  DEFINE(THREAD_SZ_ORDER,	THREAD_SIZE_ORDER);
   BLANK();
   DEFINE(S_R0,			offsetof(struct pt_regs, ARM_r0));
   DEFINE(S_R1,			offsetof(struct pt_regs, ARM_r1));
@@ -90,7 +83,6 @@ int main(void)
   DEFINE(S_OLD_R0,		offsetof(struct pt_regs, ARM_ORIG_r0));
   DEFINE(PT_REGS_SIZE,		sizeof(struct pt_regs));
   DEFINE(SVC_DACR,		offsetof(struct svc_pt_regs, dacr));
-  DEFINE(SVC_ADDR_LIMIT,	offsetof(struct svc_pt_regs, addr_limit));
   DEFINE(SVC_REGS_SIZE,		sizeof(struct svc_pt_regs));
   BLANK();
   DEFINE(SIGFRAME_RC3_OFFSET,	offsetof(struct sigframe, retcode[3]));
@@ -148,6 +140,8 @@ int main(void)
   DEFINE(SLEEP_SAVE_SP_PHYS,	offsetof(struct sleep_save_sp, save_ptr_stash_phys));
   DEFINE(SLEEP_SAVE_SP_VIRT,	offsetof(struct sleep_save_sp, save_ptr_stash));
 #endif
+  DEFINE(ARM_SMCCC_QUIRK_ID_OFFS,	offsetof(struct arm_smccc_quirk, id));
+  DEFINE(ARM_SMCCC_QUIRK_STATE_OFFS,	offsetof(struct arm_smccc_quirk, state));
   BLANK();
   DEFINE(DMA_BIDIRECTIONAL,	DMA_BIDIRECTIONAL);
   DEFINE(DMA_TO_DEVICE,		DMA_TO_DEVICE);
diff --git a/arch/arm/kernel/atags_proc.c b/arch/arm/kernel/atags_proc.c
index 3c2faf2bd124..3ec2afe78423 100644
--- a/arch/arm/kernel/atags_proc.c
+++ b/arch/arm/kernel/atags_proc.c
@@ -13,7 +13,7 @@ struct buffer {
 static ssize_t atags_read(struct file *file, char __user *buf,
 			  size_t count, loff_t *ppos)
 {
-	struct buffer *b = PDE_DATA(file_inode(file));
+	struct buffer *b = pde_data(file_inode(file));
 	return simple_read_from_buffer(buf, count, ppos, b->data, b->size);
 }
 
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index e7ef2b5bea9c..d334c7fb672b 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -142,15 +142,15 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_89C940F,
  */
 static void pci_fixup_dec21285(struct pci_dev *dev)
 {
-	int i;
-
 	if (dev->devfn == 0) {
+		struct resource *r;
+
 		dev->class &= 0xff;
 		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
-		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
+		pci_dev_for_each_resource(dev, r) {
+			r->start = 0;
+			r->end = 0;
+			r->flags = 0;
 		}
 	}
 }
@@ -162,13 +162,11 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, pci_fixup_d
 static void pci_fixup_ide_bases(struct pci_dev *dev)
 {
 	struct resource *r;
-	int i;
 
 	if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
 		return;
 
-	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-		r = dev->resource + i;
+	pci_dev_for_each_resource(dev, r) {
 		if ((r->start & ~0x80) == 0x374) {
 			r->start |= 2;
 			r->end = r->start;
diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c
index e1684623e1b2..fba1f8bb03b5 100644
--- a/arch/arm/kernel/cpuidle.c
+++ b/arch/arm/kernel/cpuidle.c
@@ -5,7 +5,6 @@
 
 #include <linux/cpuidle.h>
 #include <linux/of.h>
-#include <linux/of_device.h>
 #include <asm/cpuidle.h>
 
 extern struct of_cpuidle_method __cpuidle_method_of_table[];
@@ -26,8 +25,8 @@ static struct cpuidle_ops cpuidle_ops[NR_CPUS] __ro_after_init;
  *
  * Returns the index passed as parameter
  */
-int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
-		struct cpuidle_driver *drv, int index)
+__cpuidle int arm_cpuidle_simple_enter(struct cpuidle_device *dev, struct
+				       cpuidle_driver *drv, int index)
 {
 	cpu_do_idle();
 
diff --git a/arch/arm/kernel/crash_dump.c b/arch/arm/kernel/crash_dump.c
index 53cb92435392..938bd932df9a 100644
--- a/arch/arm/kernel/crash_dump.c
+++ b/arch/arm/kernel/crash_dump.c
@@ -14,22 +14,10 @@
 #include <linux/crash_dump.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
+#include <linux/uio.h>
 
-/**
- * copy_oldmem_page() - copy one page from old kernel memory
- * @pfn: page frame number to be copied
- * @buf: buffer where the copied page is placed
- * @csize: number of bytes to copy
- * @offset: offset in bytes into the page
- * @userbuf: if set, @buf is int he user address space
- *
- * This function copies one page from old kernel memory into buffer pointed by
- * @buf. If @buf is in userspace, set @userbuf to %1. Returns number of bytes
- * copied or negative error in case of failure.
- */
-ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
-			 size_t csize, unsigned long offset,
-			 int userbuf)
+ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn,
+			 size_t csize, unsigned long offset)
 {
 	void *vaddr;
 
@@ -40,14 +28,7 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
 	if (!vaddr)
 		return -ENOMEM;
 
-	if (userbuf) {
-		if (copy_to_user(buf, vaddr + offset, csize)) {
-			iounmap(vaddr);
-			return -EFAULT;
-		}
-	} else {
-		memcpy(buf, vaddr + offset, csize);
-	}
+	csize = copy_to_iter(vaddr + offset, csize, iter);
 
 	iounmap(vaddr);
 	return csize;
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index 28311dd0fee6..264827281113 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -84,33 +84,15 @@ void __init arm_dt_init_cpu_maps(void)
 		return;
 
 	for_each_of_cpu_node(cpu) {
-		const __be32 *cell;
-		int prop_bytes;
-		u32 hwid;
+		u32 hwid = of_get_cpu_hwid(cpu, 0);
 
 		pr_debug(" * %pOF...\n", cpu);
-		/*
-		 * A device tree containing CPU nodes with missing "reg"
-		 * properties is considered invalid to build the
-		 * cpu_logical_map.
-		 */
-		cell = of_get_property(cpu, "reg", &prop_bytes);
-		if (!cell || prop_bytes < sizeof(*cell)) {
-			pr_debug(" * %pOF missing reg property\n", cpu);
-			of_node_put(cpu);
-			return;
-		}
 
 		/*
 		 * Bits n:24 must be set to 0 in the DT since the reg property
 		 * defines the MPIDR[23:0].
 		 */
-		do {
-			hwid = be32_to_cpu(*cell++);
-			prop_bytes -= sizeof(*cell);
-		} while (!hwid && prop_bytes > 0);
-
-		if (prop_bytes || (hwid & ~MPIDR_HWID_BITMASK)) {
+		if (hwid & ~MPIDR_HWID_BITMASK) {
 			of_node_put(cpu);
 			return;
 		}
@@ -212,14 +194,12 @@ const struct machine_desc * __init setup_machine_fdt(void *dt_virt)
 {
 	const struct machine_desc *mdesc, *mdesc_best = NULL;
 
-#if defined(CONFIG_ARCH_MULTIPLATFORM) || defined(CONFIG_ARM_SINGLE_ARMV7M)
 	DT_MACHINE_START(GENERIC_DT, "Generic DT based system")
 		.l2c_aux_val = 0x0,
 		.l2c_aux_mask = ~0x0,
 	MACHINE_END
 
 	mdesc_best = &__mach_desc_GENERIC_DT;
-#endif
 
 	if (!dt_virt || !early_init_dt_verify(dt_virt))
 		return NULL;
diff --git a/arch/arm/kernel/efi.c b/arch/arm/kernel/efi.c
index e57dbcc89123..e2b9d2618c67 100644
--- a/arch/arm/kernel/efi.c
+++ b/arch/arm/kernel/efi.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/efi.h>
+#include <linux/memblock.h>
 #include <asm/efi.h>
 #include <asm/mach/map.h>
 #include <asm/mmu_context.h>
@@ -22,7 +23,8 @@ static int __init set_permissions(pte_t *ptep, unsigned long addr, void *data)
 }
 
 int __init efi_set_mapping_permissions(struct mm_struct *mm,
-				       efi_memory_desc_t *md)
+				       efi_memory_desc_t *md,
+				       bool ignored)
 {
 	unsigned long base, size;
 
@@ -70,6 +72,63 @@ int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
 	 * If stricter permissions were specified, apply them now.
 	 */
 	if (md->attribute & (EFI_MEMORY_RO | EFI_MEMORY_XP))
-		return efi_set_mapping_permissions(mm, md);
+		return efi_set_mapping_permissions(mm, md, false);
 	return 0;
 }
+
+static unsigned long __initdata cpu_state_table = EFI_INVALID_TABLE_ADDR;
+
+const efi_config_table_type_t efi_arch_tables[] __initconst = {
+	{LINUX_EFI_ARM_CPU_STATE_TABLE_GUID, &cpu_state_table},
+	{}
+};
+
+static void __init load_cpu_state_table(void)
+{
+	if (cpu_state_table != EFI_INVALID_TABLE_ADDR) {
+		struct efi_arm_entry_state *state;
+		bool dump_state = true;
+
+		state = early_memremap_ro(cpu_state_table,
+					  sizeof(struct efi_arm_entry_state));
+		if (state == NULL) {
+			pr_warn("Unable to map CPU entry state table.\n");
+			return;
+		}
+
+		if ((state->sctlr_before_ebs & 1) == 0)
+			pr_warn(FW_BUG "EFI stub was entered with MMU and Dcache disabled, please fix your firmware!\n");
+		else if ((state->sctlr_after_ebs & 1) == 0)
+			pr_warn(FW_BUG "ExitBootServices() returned with MMU and Dcache disabled, please fix your firmware!\n");
+		else
+			dump_state = false;
+
+		if (dump_state || efi_enabled(EFI_DBG)) {
+			pr_info("CPSR at EFI stub entry        : 0x%08x\n",
+				state->cpsr_before_ebs);
+			pr_info("SCTLR at EFI stub entry       : 0x%08x\n",
+				state->sctlr_before_ebs);
+			pr_info("CPSR after ExitBootServices() : 0x%08x\n",
+				state->cpsr_after_ebs);
+			pr_info("SCTLR after ExitBootServices(): 0x%08x\n",
+				state->sctlr_after_ebs);
+		}
+		early_memunmap(state, sizeof(struct efi_arm_entry_state));
+	}
+}
+
+void __init arm_efi_init(void)
+{
+	efi_init();
+
+	if (screen_info.orig_video_isVGA == VIDEO_TYPE_EFI) {
+		/* dummycon on ARM needs non-zero values for columns/lines */
+		screen_info.orig_video_cols = 80;
+		screen_info.orig_video_lines = 25;
+	}
+
+	/* ARM does not permit early mappings to persist across paging_init() */
+	efi_memmap_unmap();
+
+	load_cpu_state_table();
+}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 0ea8529a4872..682e92664b07 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -19,9 +19,6 @@
 #include <asm/glue-df.h>
 #include <asm/glue-pf.h>
 #include <asm/vfpmacros.h>
-#ifndef CONFIG_GENERIC_IRQ_MULTI_HANDLER
-#include <mach/entry-macro.S>
-#endif
 #include <asm/thread_notify.h>
 #include <asm/unwind.h>
 #include <asm/unistd.h>
@@ -30,30 +27,42 @@
 #include <asm/uaccess-asm.h>
 
 #include "entry-header.S"
-#include <asm/entry-macro-multi.S>
 #include <asm/probes.h>
 
 /*
  * Interrupt handling.
  */
-	.macro	irq_handler
-#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
-	ldr	r1, =handle_arch_irq
-	mov	r0, sp
-	badr	lr, 9997f
-	ldr	pc, [r1]
-#else
-	arch_irq_handler_default
+	.macro	irq_handler, from_user:req
+	mov	r1, sp
+	ldr_this_cpu r2, irq_stack_ptr, r2, r3
+	.if	\from_user == 0
+	@
+	@ If we took the interrupt while running in the kernel, we may already
+	@ be using the IRQ stack, so revert to the original value in that case.
+	@
+	subs	r3, r2, r1		@ SP above bottom of IRQ stack?
+	rsbscs	r3, r3, #THREAD_SIZE	@ ... and below the top?
+#ifdef CONFIG_VMAP_STACK
+	ldr_va	r3, high_memory, cc	@ End of the linear region
+	cmpcc	r3, r1			@ Stack pointer was below it?
 #endif
-9997:
+	bcc	0f			@ If not, switch to the IRQ stack
+	mov	r0, r1
+	bl	generic_handle_arch_irq
+	b	1f
+0:
+	.endif
+
+	mov_l	r0, generic_handle_arch_irq
+	bl	call_with_stack
+1:
 	.endm
 
 	.macro	pabt_helper
 	@ PABORT handler takes pt_regs in r2, fault address in r4 and psr in r5
 #ifdef MULTI_PABORT
-	ldr	ip, .LCprocfns
-	mov	lr, pc
-	ldr	pc, [ip, #PROCESSOR_PABT_FUNC]
+	ldr_va	ip, processor, offset=PROCESSOR_PABT_FUNC
+	bl_r	ip
 #else
 	bl	CPU_PABORT_HANDLER
 #endif
@@ -72,9 +81,8 @@
 	@ the fault status register in r1.  r9 must be preserved.
 	@
 #ifdef MULTI_DABORT
-	ldr	ip, .LCprocfns
-	mov	lr, pc
-	ldr	pc, [ip, #PROCESSOR_DABT_FUNC]
+	ldr_va	ip, processor, offset=PROCESSOR_DABT_FUNC
+	bl_r	ip
 #else
 	bl	CPU_DABORT_HANDLER
 #endif
@@ -143,27 +151,35 @@ ENDPROC(__und_invalid)
 #define SPFIX(code...)
 #endif
 
-	.macro	svc_entry, stack_hole=0, trace=1, uaccess=1
+	.macro	svc_entry, stack_hole=0, trace=1, uaccess=1, overflow_check=1
  UNWIND(.fnstart		)
- UNWIND(.save {r0 - pc}		)
-	sub	sp, sp, #(SVC_REGS_SIZE + \stack_hole - 4)
+	sub	sp, sp, #(SVC_REGS_SIZE + \stack_hole)
+ THUMB(	add	sp, r1		)	@ get SP in a GPR without
+ THUMB(	sub	r1, sp, r1	)	@ using a temp register
+
+	.if	\overflow_check
+ UNWIND(.save	{r0 - pc}	)
+	do_overflow_check (SVC_REGS_SIZE + \stack_hole)
+	.endif
+
 #ifdef CONFIG_THUMB2_KERNEL
- SPFIX(	str	r0, [sp]	)	@ temporarily saved
- SPFIX(	mov	r0, sp		)
- SPFIX(	tst	r0, #4		)	@ test original stack alignment
- SPFIX(	ldr	r0, [sp]	)	@ restored
+	tst	r1, #4			@ test stack pointer alignment
+	sub	r1, sp, r1		@ restore original R1
+	sub	sp, r1			@ restore original SP
 #else
  SPFIX(	tst	sp, #4		)
 #endif
- SPFIX(	subeq	sp, sp, #4	)
-	stmia	sp, {r1 - r12}
+ SPFIX(	subne	sp, sp, #4	)
+
+ ARM(	stmib	sp, {r1 - r12}	)
+ THUMB(	stmia	sp, {r0 - r12}	)	@ No STMIB in Thumb-2
 
 	ldmia	r0, {r3 - r5}
-	add	r7, sp, #S_SP - 4	@ here for interlock avoidance
+	add	r7, sp, #S_SP		@ here for interlock avoidance
 	mov	r6, #-1			@  ""  ""      ""       ""
-	add	r2, sp, #(SVC_REGS_SIZE + \stack_hole - 4)
- SPFIX(	addeq	r2, r2, #4	)
-	str	r3, [sp, #-4]!		@ save the "real" r0 copied
+	add	r2, sp, #(SVC_REGS_SIZE + \stack_hole)
+ SPFIX(	addne	r2, r2, #4	)
+	str	r3, [sp]		@ save the "real" r0 copied
 					@ from the exception stack
 
 	mov	r3, lr
@@ -202,7 +218,7 @@ ENDPROC(__dabt_svc)
 	.align	5
 __irq_svc:
 	svc_entry
-	irq_handler
+	irq_handler from_user=0
 
 #ifdef CONFIG_PREEMPTION
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -284,16 +300,6 @@ __fiq_svc:
  UNWIND(.fnend		)
 ENDPROC(__fiq_svc)
 
-	.align	5
-.LCcralign:
-	.word	cr_alignment
-#ifdef MULTI_DABORT
-.LCprocfns:
-	.word	processor
-#endif
-.LCfp:
-	.word	fp_enter
-
 /*
  * Abort mode handlers
  */
@@ -352,7 +358,7 @@ ENDPROC(__fiq_abt)
  THUMB(	stmia	sp, {r0 - r12}	)
 
  ATRAP(	mrc	p15, 0, r7, c1, c0, 0)
- ATRAP(	ldr	r8, .LCcralign)
+ ATRAP(	ldr_va	r8, cr_alignment)
 
 	ldmia	r0, {r3 - r5}
 	add	r0, sp, #S_PC		@ here for interlock avoidance
@@ -361,8 +367,6 @@ ENDPROC(__fiq_abt)
 	str	r3, [sp]		@ save the "real" r0 copied
 					@ from the exception stack
 
- ATRAP(	ldr	r8, [r8, #0])
-
 	@
 	@ We are now ready to fill in the remaining blanks on the stack:
 	@
@@ -384,6 +388,8 @@ ENDPROC(__fiq_abt)
  ATRAP(	teq	r8, r7)
  ATRAP( mcrne	p15, 0, r8, c1, c0, 0)
 
+	reload_current r7, r8
+
 	@
 	@ Clear FP to mark the first stack frame
 	@
@@ -427,7 +433,7 @@ ENDPROC(__dabt_usr)
 __irq_usr:
 	usr_entry
 	kuser_cmpxchg_check
-	irq_handler
+	irq_handler from_user=1
 	get_thread_info tsk
 	mov	why, #0
 	b	ret_to_user_from_irq
@@ -440,275 +446,26 @@ ENDPROC(__irq_usr)
 __und_usr:
 	usr_entry uaccess=0
 
-	mov	r2, r4
-	mov	r3, r5
-
-	@ r2 = regs->ARM_pc, which is either 2 or 4 bytes ahead of the
-	@      faulting instruction depending on Thumb mode.
-	@ r3 = regs->ARM_cpsr
-	@
-	@ The emulation code returns using r9 if it has emulated the
-	@ instruction, or the more conventional lr if we are to treat
-	@ this as a real undefined instruction
-	@
-	badr	r9, ret_from_exception
-
 	@ IRQs must be enabled before attempting to read the instruction from
 	@ user space since that could cause a page/translation fault if the
 	@ page table was modified by another CPU.
 	enable_irq
 
-	tst	r3, #PSR_T_BIT			@ Thumb mode?
-	bne	__und_usr_thumb
-	sub	r4, r2, #4			@ ARM instr at LR - 4
-1:	ldrt	r0, [r4]
- ARM_BE8(rev	r0, r0)				@ little endian instruction
-
-	uaccess_disable ip
-
-	@ r0 = 32-bit ARM instruction which caused the exception
-	@ r2 = PC value for the following instruction (:= regs->ARM_pc)
-	@ r4 = PC value for the faulting instruction
-	@ lr = 32-bit undefined instruction function
-	badr	lr, __und_usr_fault_32
-	b	call_fpe
-
-__und_usr_thumb:
-	@ Thumb instruction
-	sub	r4, r2, #2			@ First half of thumb instr at LR - 2
-#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
-/*
- * Thumb-2 instruction handling.  Note that because pre-v6 and >= v6 platforms
- * can never be supported in a single kernel, this code is not applicable at
- * all when __LINUX_ARM_ARCH__ < 6.  This allows simplifying assumptions to be
- * made about .arch directives.
- */
-#if __LINUX_ARM_ARCH__ < 7
-/* If the target CPU may not be Thumb-2-capable, a run-time check is needed: */
-#define NEED_CPU_ARCHITECTURE
-	ldr	r5, .LCcpu_architecture
-	ldr	r5, [r5]
-	cmp	r5, #CPU_ARCH_ARMv7
-	blo	__und_usr_fault_16		@ 16bit undefined instruction
-/*
- * The following code won't get run unless the running CPU really is v7, so
- * coding round the lack of ldrht on older arches is pointless.  Temporarily
- * override the assembler target arch with the minimum required instead:
- */
-	.arch	armv6t2
+	tst	r5, #PSR_T_BIT			@ Thumb mode?
+	mov	r1, #2				@ set insn size to 2 for Thumb
+	bne	0f				@ handle as Thumb undef exception
+#ifdef CONFIG_FPE_NWFPE
+	adr	r9, ret_from_exception
+	bl	call_fpe			@ returns via R9 on success
 #endif
-2:	ldrht	r5, [r4]
-ARM_BE8(rev16	r5, r5)				@ little endian instruction
-	cmp	r5, #0xe800			@ 32bit instruction if xx != 0
-	blo	__und_usr_fault_16_pan		@ 16bit undefined instruction
-3:	ldrht	r0, [r2]
-ARM_BE8(rev16	r0, r0)				@ little endian instruction
+	mov	r1, #4				@ set insn size to 4 for ARM
+0:	mov	r0, sp
 	uaccess_disable ip
-	add	r2, r2, #2			@ r2 is PC + 2, make it PC + 4
-	str	r2, [sp, #S_PC]			@ it's a 2x16bit instr, update
-	orr	r0, r0, r5, lsl #16
-	badr	lr, __und_usr_fault_32
-	@ r0 = the two 16-bit Thumb instructions which caused the exception
-	@ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc)
-	@ r4 = PC value for the first 16-bit Thumb instruction
-	@ lr = 32bit undefined instruction function
-
-#if __LINUX_ARM_ARCH__ < 7
-/* If the target arch was overridden, change it back: */
-#ifdef CONFIG_CPU_32v6K
-	.arch	armv6k
-#else
-	.arch	armv6
-#endif
-#endif /* __LINUX_ARM_ARCH__ < 7 */
-#else /* !(CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7) */
-	b	__und_usr_fault_16
-#endif
+	bl	__und_fault
+	b	ret_from_exception
  UNWIND(.fnend)
 ENDPROC(__und_usr)
 
-/*
- * The out of line fixup for the ldrt instructions above.
- */
-	.pushsection .text.fixup, "ax"
-	.align	2
-4:	str     r4, [sp, #S_PC]			@ retry current instruction
-	ret	r9
-	.popsection
-	.pushsection __ex_table,"a"
-	.long	1b, 4b
-#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
-	.long	2b, 4b
-	.long	3b, 4b
-#endif
-	.popsection
-
-/*
- * Check whether the instruction is a co-processor instruction.
- * If yes, we need to call the relevant co-processor handler.
- *
- * Note that we don't do a full check here for the co-processor
- * instructions; all instructions with bit 27 set are well
- * defined.  The only instructions that should fault are the
- * co-processor instructions.  However, we have to watch out
- * for the ARM6/ARM7 SWI bug.
- *
- * NEON is a special case that has to be handled here. Not all
- * NEON instructions are co-processor instructions, so we have
- * to make a special case of checking for them. Plus, there's
- * five groups of them, so we have a table of mask/opcode pairs
- * to check against, and if any match then we branch off into the
- * NEON handler code.
- *
- * Emulators may wish to make use of the following registers:
- *  r0  = instruction opcode (32-bit ARM or two 16-bit Thumb)
- *  r2  = PC value to resume execution after successful emulation
- *  r9  = normal "successful" return address
- *  r10 = this threads thread_info structure
- *  lr  = unrecognised instruction return address
- * IRQs enabled, FIQs enabled.
- */
-	@
-	@ Fall-through from Thumb-2 __und_usr
-	@
-#ifdef CONFIG_NEON
-	get_thread_info r10			@ get current thread
-	adr	r6, .LCneon_thumb_opcodes
-	b	2f
-#endif
-call_fpe:
-	get_thread_info r10			@ get current thread
-#ifdef CONFIG_NEON
-	adr	r6, .LCneon_arm_opcodes
-2:	ldr	r5, [r6], #4			@ mask value
-	ldr	r7, [r6], #4			@ opcode bits matching in mask
-	cmp	r5, #0				@ end mask?
-	beq	1f
-	and	r8, r0, r5
-	cmp	r8, r7				@ NEON instruction?
-	bne	2b
-	mov	r7, #1
-	strb	r7, [r10, #TI_USED_CP + 10]	@ mark CP#10 as used
-	strb	r7, [r10, #TI_USED_CP + 11]	@ mark CP#11 as used
-	b	do_vfp				@ let VFP handler handle this
-1:
-#endif
-	tst	r0, #0x08000000			@ only CDP/CPRT/LDC/STC have bit 27
-	tstne	r0, #0x04000000			@ bit 26 set on both ARM and Thumb-2
-	reteq	lr
-	and	r8, r0, #0x00000f00		@ mask out CP number
- THUMB(	lsr	r8, r8, #8		)
-	mov	r7, #1
-	add	r6, r10, #TI_USED_CP
- ARM(	strb	r7, [r6, r8, lsr #8]	)	@ set appropriate used_cp[]
- THUMB(	strb	r7, [r6, r8]		)	@ set appropriate used_cp[]
-#ifdef CONFIG_IWMMXT
-	@ Test if we need to give access to iWMMXt coprocessors
-	ldr	r5, [r10, #TI_FLAGS]
-	rsbs	r7, r8, #(1 << 8)		@ CP 0 or 1 only
-	movscs	r7, r5, lsr #(TIF_USING_IWMMXT + 1)
-	bcs	iwmmxt_task_enable
-#endif
- ARM(	add	pc, pc, r8, lsr #6	)
- THUMB(	lsl	r8, r8, #2		)
- THUMB(	add	pc, r8			)
-	nop
-
-	ret.w	lr				@ CP#0
-	W(b)	do_fpe				@ CP#1 (FPE)
-	W(b)	do_fpe				@ CP#2 (FPE)
-	ret.w	lr				@ CP#3
-#ifdef CONFIG_CRUNCH
-	b	crunch_task_enable		@ CP#4 (MaverickCrunch)
-	b	crunch_task_enable		@ CP#5 (MaverickCrunch)
-	b	crunch_task_enable		@ CP#6 (MaverickCrunch)
-#else
-	ret.w	lr				@ CP#4
-	ret.w	lr				@ CP#5
-	ret.w	lr				@ CP#6
-#endif
-	ret.w	lr				@ CP#7
-	ret.w	lr				@ CP#8
-	ret.w	lr				@ CP#9
-#ifdef CONFIG_VFP
-	W(b)	do_vfp				@ CP#10 (VFP)
-	W(b)	do_vfp				@ CP#11 (VFP)
-#else
-	ret.w	lr				@ CP#10 (VFP)
-	ret.w	lr				@ CP#11 (VFP)
-#endif
-	ret.w	lr				@ CP#12
-	ret.w	lr				@ CP#13
-	ret.w	lr				@ CP#14 (Debug)
-	ret.w	lr				@ CP#15 (Control)
-
-#ifdef NEED_CPU_ARCHITECTURE
-	.align	2
-.LCcpu_architecture:
-	.word	__cpu_architecture
-#endif
-
-#ifdef CONFIG_NEON
-	.align	6
-
-.LCneon_arm_opcodes:
-	.word	0xfe000000			@ mask
-	.word	0xf2000000			@ opcode
-
-	.word	0xff100000			@ mask
-	.word	0xf4000000			@ opcode
-
-	.word	0x00000000			@ mask
-	.word	0x00000000			@ opcode
-
-.LCneon_thumb_opcodes:
-	.word	0xef000000			@ mask
-	.word	0xef000000			@ opcode
-
-	.word	0xff100000			@ mask
-	.word	0xf9000000			@ opcode
-
-	.word	0x00000000			@ mask
-	.word	0x00000000			@ opcode
-#endif
-
-do_fpe:
-	ldr	r4, .LCfp
-	add	r10, r10, #TI_FPSTATE		@ r10 = workspace
-	ldr	pc, [r4]			@ Call FP module USR entry point
-
-/*
- * The FP module is called with these registers set:
- *  r0  = instruction
- *  r2  = PC+4
- *  r9  = normal "successful" return address
- *  r10 = FP workspace
- *  lr  = unrecognised FP instruction return address
- */
-
-	.pushsection .data
-	.align	2
-ENTRY(fp_enter)
-	.word	no_fp
-	.popsection
-
-ENTRY(no_fp)
-	ret	lr
-ENDPROC(no_fp)
-
-__und_usr_fault_32:
-	mov	r1, #4
-	b	1f
-__und_usr_fault_16_pan:
-	uaccess_disable ip
-__und_usr_fault_16:
-	mov	r1, #2
-1:	mov	r0, sp
-	badr	lr, ret_from_exception
-	b	__und_fault
-ENDPROC(__und_usr_fault_32)
-ENDPROC(__und_usr_fault_16)
-
 	.align	5
 __pabt_usr:
 	usr_entry
@@ -761,14 +518,17 @@ ENTRY(__switch_to)
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
 	switch_tls r1, r4, r5, r3, r7
-#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP)
-	ldr	r7, [r2, #TI_TASK]
+#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP) && \
+    !defined(CONFIG_STACKPROTECTOR_PER_TASK)
 	ldr	r8, =__stack_chk_guard
 	.if (TSK_STACK_CANARY > IMM12_MASK)
-	add	r7, r7, #TSK_STACK_CANARY & ~IMM12_MASK
+	add	r9, r2, #TSK_STACK_CANARY & ~IMM12_MASK
+	ldr	r9, [r9, #TSK_STACK_CANARY & IMM12_MASK]
+	.else
+	ldr	r9, [r2, #TSK_STACK_CANARY & IMM12_MASK]
 	.endif
-	ldr	r7, [r7, #TSK_STACK_CANARY & IMM12_MASK]
 #endif
+	mov	r7, r2				@ Preserve 'next'
 #ifdef CONFIG_CPU_USE_DOMAINS
 	mcr	p15, 0, r6, c3, c0, 0		@ Set domain register
 #endif
@@ -777,18 +537,102 @@ ENTRY(__switch_to)
 	ldr	r0, =thread_notify_head
 	mov	r1, #THREAD_NOTIFY_SWITCH
 	bl	atomic_notifier_call_chain
-#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP)
-	str	r7, [r8]
+#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP) && \
+    !defined(CONFIG_STACKPROTECTOR_PER_TASK)
+	str	r9, [r8]
 #endif
- THUMB(	mov	ip, r4			   )
 	mov	r0, r5
- ARM(	ldmia	r4, {r4 - sl, fp, sp, pc}  )	@ Load all regs saved previously
- THUMB(	ldmia	ip!, {r4 - sl, fp}	   )	@ Load all regs saved previously
- THUMB(	ldr	sp, [ip], #4		   )
- THUMB(	ldr	pc, [ip]		   )
+#if !defined(CONFIG_THUMB2_KERNEL) && !defined(CONFIG_VMAP_STACK)
+	set_current r7, r8
+	ldmia	r4, {r4 - sl, fp, sp, pc}	@ Load all regs saved previously
+#else
+	mov	r1, r7
+	ldmia	r4, {r4 - sl, fp, ip, lr}	@ Load all regs saved previously
+#ifdef CONFIG_VMAP_STACK
+	@
+	@ Do a dummy read from the new stack while running from the old one so
+	@ that we can rely on do_translation_fault() to fix up any stale PMD
+	@ entries covering the vmalloc region.
+	@
+	ldr	r2, [ip]
+#endif
+
+	@ When CONFIG_THREAD_INFO_IN_TASK=n, the update of SP itself is what
+	@ effectuates the task switch, as that is what causes the observable
+	@ values of current and current_thread_info to change. When
+	@ CONFIG_THREAD_INFO_IN_TASK=y, setting current (and therefore
+	@ current_thread_info) is done explicitly, and the update of SP just
+	@ switches us to another stack, with few other side effects. In order
+	@ to prevent this distinction from causing any inconsistencies, let's
+	@ keep the 'set_current' call as close as we can to the update of SP.
+	set_current r1, r2
+	mov	sp, ip
+	ret	lr
+#endif
  UNWIND(.fnend		)
 ENDPROC(__switch_to)
 
+#ifdef CONFIG_VMAP_STACK
+	.text
+	.align	2
+__bad_stack:
+	@
+	@ We've just detected an overflow. We need to load the address of this
+	@ CPU's overflow stack into the stack pointer register. We have only one
+	@ scratch register so let's use a sequence of ADDs including one
+	@ involving the PC, and decorate them with PC-relative group
+	@ relocations. As these are ARM only, switch to ARM mode first.
+	@
+	@ We enter here with IP clobbered and its value stashed on the mode
+	@ stack.
+	@
+THUMB(	bx	pc		)
+THUMB(	nop			)
+THUMB(	.arm			)
+	ldr_this_cpu_armv6 ip, overflow_stack_ptr
+
+	str	sp, [ip, #-4]!			@ Preserve original SP value
+	mov	sp, ip				@ Switch to overflow stack
+	pop	{ip}				@ Original SP in IP
+
+#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
+	mov	ip, ip				@ mov expected by unwinder
+	push	{fp, ip, lr, pc}		@ GCC flavor frame record
+#else
+	str	ip, [sp, #-8]!			@ store original SP
+	push	{fpreg, lr}			@ Clang flavor frame record
+#endif
+UNWIND( ldr	ip, [r0, #4]	)		@ load exception LR
+UNWIND( str	ip, [sp, #12]	)		@ store in the frame record
+	ldr	ip, [r0, #12]			@ reload IP
+
+	@ Store the original GPRs to the new stack.
+	svc_entry uaccess=0, overflow_check=0
+
+UNWIND( .save   {sp, pc}	)
+UNWIND( .save   {fpreg, lr}	)
+UNWIND( .setfp  fpreg, sp	)
+
+	ldr	fpreg, [sp, #S_SP]		@ Add our frame record
+						@ to the linked list
+#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
+	ldr	r1, [fp, #4]			@ reload SP at entry
+	add	fp, fp, #12
+#else
+	ldr	r1, [fpreg, #8]
+#endif
+	str	r1, [sp, #S_SP]			@ store in pt_regs
+
+	@ Stash the regs for handle_bad_stack
+	mov	r0, sp
+
+	@ Time to die
+	bl	handle_bad_stack
+	nop
+UNWIND( .fnend			)
+ENDPROC(__bad_stack)
+#endif
+
 	__INIT
 
 /*
@@ -1002,17 +846,23 @@ __kuser_helper_end:
  */
 	.macro	vector_stub, name, mode, correction=0
 	.align	5
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+vector_bhb_bpiall_\name:
+	mcr	p15, 0, r0, c7, c5, 6	@ BPIALL
+	@ isb not needed due to "movs pc, lr" in the vector stub
+	@ which gives a "context synchronisation".
+#endif
 
 vector_\name:
 	.if \correction
 	sub	lr, lr, #\correction
 	.endif
 
-	@
-	@ Save r0, lr_<exception> (parent PC) and spsr_<exception>
-	@ (parent CPSR)
-	@
+	@ Save r0, lr_<exception> (parent PC)
 	stmia	sp, {r0, lr}		@ save r0, lr
+
+	@ Save spsr_<exception> (parent CPSR)
+.Lvec_\name:
 	mrs	lr, spsr
 	str	lr, [sp, #8]		@ save spsr
 
@@ -1034,14 +884,47 @@ vector_\name:
 	movs	pc, lr			@ branch to handler in SVC mode
 ENDPROC(vector_\name)
 
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.subsection 1
+	.align 5
+vector_bhb_loop8_\name:
+	.if \correction
+	sub	lr, lr, #\correction
+	.endif
+
+	@ Save r0, lr_<exception> (parent PC)
+	stmia	sp, {r0, lr}
+
+	@ bhb workaround
+	mov	r0, #8
+3:	W(b)	. + 4
+	subs	r0, r0, #1
+	bne	3b
+	dsb	nsh
+	@ isb not needed due to "movs pc, lr" in the vector stub
+	@ which gives a "context synchronisation".
+	b	.Lvec_\name
+ENDPROC(vector_bhb_loop8_\name)
+	.previous
+#endif
+
 	.align	2
 	@ handler addresses follow this label
 1:
 	.endm
 
 	.section .stubs, "ax", %progbits
-	@ This must be the first word
+	@ These need to remain at the start of the section so that
+	@ they are in range of the 'SWI' entries in the vector tables
+	@ located 4k down.
+.L__vector_swi:
 	.word	vector_swi
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+.L__vector_bhb_loop8_swi:
+	.word	vector_bhb_loop8_swi
+.L__vector_bhb_bpiall_swi:
+	.word	vector_bhb_bpiall_swi
+#endif
 
 vector_rst:
  ARM(	swi	SYS_ERROR0	)
@@ -1156,8 +1039,10 @@ vector_addrexcptn:
  * FIQ "NMI" handler
  *-----------------------------------------------------------------------------
  * Handle a FIQ using the SVC stack allowing FIQ act like NMI on x86
- * systems.
+ * systems. This must be the last vector stub, so lets place it in its own
+ * subsection.
  */
+	.subsection 2
 	vector_stub	fiq, FIQ_MODE, 4
 
 	.long	__fiq_usr			@  0  (USR_26 / USR_32)
@@ -1180,16 +1065,43 @@ vector_addrexcptn:
 	.globl	vector_fiq
 
 	.section .vectors, "ax", %progbits
-.L__vectors_start:
 	W(b)	vector_rst
 	W(b)	vector_und
-	W(ldr)	pc, .L__vectors_start + 0x1000
+ARM(	.reloc	., R_ARM_LDR_PC_G0, .L__vector_swi		)
+THUMB(	.reloc	., R_ARM_THM_PC12, .L__vector_swi		)
+	W(ldr)	pc, .
 	W(b)	vector_pabt
 	W(b)	vector_dabt
 	W(b)	vector_addrexcptn
 	W(b)	vector_irq
 	W(b)	vector_fiq
 
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.section .vectors.bhb.loop8, "ax", %progbits
+	W(b)	vector_rst
+	W(b)	vector_bhb_loop8_und
+ARM(	.reloc	., R_ARM_LDR_PC_G0, .L__vector_bhb_loop8_swi	)
+THUMB(	.reloc	., R_ARM_THM_PC12, .L__vector_bhb_loop8_swi	)
+	W(ldr)	pc, .
+	W(b)	vector_bhb_loop8_pabt
+	W(b)	vector_bhb_loop8_dabt
+	W(b)	vector_addrexcptn
+	W(b)	vector_bhb_loop8_irq
+	W(b)	vector_bhb_loop8_fiq
+
+	.section .vectors.bhb.bpiall, "ax", %progbits
+	W(b)	vector_rst
+	W(b)	vector_bhb_bpiall_und
+ARM(	.reloc	., R_ARM_LDR_PC_G0, .L__vector_bhb_bpiall_swi	)
+THUMB(	.reloc	., R_ARM_THM_PC12, .L__vector_bhb_bpiall_swi	)
+	W(ldr)	pc, .
+	W(b)	vector_bhb_bpiall_pabt
+	W(b)	vector_bhb_bpiall_dabt
+	W(b)	vector_addrexcptn
+	W(b)	vector_bhb_bpiall_irq
+	W(b)	vector_bhb_bpiall_fiq
+#endif
+
 	.data
 	.align	2
 
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index e0d7833a1827..03d4c5578c5c 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -16,17 +16,10 @@
 
 	.equ	NR_syscalls, __NR_syscalls
 
-#ifdef CONFIG_NEED_RET_TO_USER
-#include <mach/entry-macro.S>
-#else
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-#endif
-
 #include "entry-header.S"
 
 saved_psr	.req	r8
-#if defined(CONFIG_TRACE_IRQFLAGS) || defined(CONFIG_CONTEXT_TRACKING)
+#if defined(CONFIG_TRACE_IRQFLAGS) || defined(CONFIG_CONTEXT_TRACKING_USER)
 saved_pc	.req	r9
 #define TRACE(x...) x
 #else
@@ -36,7 +29,7 @@ saved_pc	.req	lr
 
 	.section .entry.text,"ax",%progbits
 	.align	5
-#if !(IS_ENABLED(CONFIG_TRACE_IRQFLAGS) || IS_ENABLED(CONFIG_CONTEXT_TRACKING) || \
+#if !(IS_ENABLED(CONFIG_TRACE_IRQFLAGS) || IS_ENABLED(CONFIG_CONTEXT_TRACKING_USER) || \
 	IS_ENABLED(CONFIG_DEBUG_RSEQ))
 /*
  * This is the fast syscall return path.  We do as little as possible here,
@@ -49,18 +42,10 @@ __ret_fast_syscall:
  UNWIND(.fnstart	)
  UNWIND(.cantunwind	)
 	disable_irq_notrace			@ disable interrupts
-	ldr	r2, [tsk, #TI_ADDR_LIMIT]
-	ldr	r1, =TASK_SIZE
-	cmp	r2, r1
-	blne	addr_limit_check_failed
 	ldr	r1, [tsk, #TI_FLAGS]		@ re-check for syscall tracing
 	movs	r1, r1, lsl #16
 	bne	fast_work_pending
 
-
-	/* perform architecture specific actions before user return */
-	arch_ret_to_user r1, lr
-
 	restore_user_regs fast = 1, offset = S_OFF
  UNWIND(.fnend		)
 ENDPROC(ret_fast_syscall)
@@ -87,10 +72,6 @@ __ret_fast_syscall:
 	bl	do_rseq_syscall
 #endif
 	disable_irq_notrace			@ disable interrupts
-	ldr	r2, [tsk, #TI_ADDR_LIMIT]
-	ldr     r1, =TASK_SIZE
-	cmp     r2, r1
-	blne	addr_limit_check_failed
 	ldr	r1, [tsk, #TI_FLAGS]		@ re-check for syscall tracing
 	movs	r1, r1, lsl #16
 	beq	no_work_pending
@@ -129,18 +110,12 @@ ret_slow_syscall:
 #endif
 	disable_irq_notrace			@ disable interrupts
 ENTRY(ret_to_user_from_irq)
-	ldr	r2, [tsk, #TI_ADDR_LIMIT]
-	ldr     r1, =TASK_SIZE
-	cmp	r2, r1
-	blne	addr_limit_check_failed
 	ldr	r1, [tsk, #TI_FLAGS]
 	movs	r1, r1, lsl #16
 	bne	slow_work_pending
 no_work_pending:
 	asm_trace_hardirqs_on save = 0
 
-	/* perform architecture specific actions before user return */
-	arch_ret_to_user r1, lr
 	ct_user_enter save = 0
 
 	restore_user_regs fast = 0, offset = 0
@@ -166,12 +141,36 @@ ENDPROC(ret_from_fork)
  */
 
 	.align	5
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+ENTRY(vector_bhb_loop8_swi)
+	sub	sp, sp, #PT_REGS_SIZE
+	stmia	sp, {r0 - r12}
+	mov	r8, #8
+1:	b	2f
+2:	subs	r8, r8, #1
+	bne	1b
+	dsb	nsh
+	isb
+	b	3f
+ENDPROC(vector_bhb_loop8_swi)
+
+	.align	5
+ENTRY(vector_bhb_bpiall_swi)
+	sub	sp, sp, #PT_REGS_SIZE
+	stmia	sp, {r0 - r12}
+	mcr	p15, 0, r8, c7, c5, 6	@ BPIALL
+	isb
+	b	3f
+ENDPROC(vector_bhb_bpiall_swi)
+#endif
+	.align	5
 ENTRY(vector_swi)
 #ifdef CONFIG_CPU_V7M
 	v7m_exception_entry
 #else
 	sub	sp, sp, #PT_REGS_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0 - r12
+3:
  ARM(	add	r8, sp, #S_PC		)
  ARM(	stmdb	r8, {sp, lr}^		)	@ Calling sp, lr
  THUMB(	mov	r8, sp			)
@@ -182,8 +181,9 @@ ENTRY(vector_swi)
 	str	saved_psr, [sp, #S_PSR]		@ Save CPSR
 	str	r0, [sp, #S_OLD_R0]		@ Save OLD_R0
 #endif
+	reload_current r10, ip
 	zero_fp
-	alignment_trap r10, ip, __cr_alignment
+	alignment_trap r10, ip, cr_alignment
 	asm_trace_hardirqs_on save=0
 	enable_irq_notrace
 	ct_user_exit save=0
@@ -226,6 +226,7 @@ ENTRY(vector_swi)
 	/* saved_psr and saved_pc are now dead */
 
 	uaccess_disable tbl
+	get_thread_info tsk
 
 	adr	tbl, sys_call_table		@ load syscall table pointer
 
@@ -237,13 +238,17 @@ ENTRY(vector_swi)
 	 * get the old ABI syscall table address.
 	 */
 	bics	r10, r10, #0xff000000
+	strne	r10, [tsk, #TI_ABI_SYSCALL]
+	streq	scno, [tsk, #TI_ABI_SYSCALL]
 	eorne	scno, r10, #__NR_OABI_SYSCALL_BASE
 	ldrne	tbl, =sys_oabi_call_table
 #elif !defined(CONFIG_AEABI)
 	bic	scno, scno, #0xff000000		@ mask off SWI op-code
+	str	scno, [tsk, #TI_ABI_SYSCALL]
 	eor	scno, scno, #__NR_SYSCALL_BASE	@ check OS number
+#else
+	str	scno, [tsk, #TI_ABI_SYSCALL]
 #endif
-	get_thread_info tsk
 	/*
 	 * Reload the registers that may have been corrupted on entry to
 	 * the syscall assembly (by tracing or context tracking.)
@@ -282,13 +287,13 @@ local_restart:
 	b	ret_fast_syscall
 #endif
 ENDPROC(vector_swi)
+	.ltorg
 
 	/*
 	 * This is the really slow path.  We're going to be doing
 	 * context switches, and waiting for our parent to respond.
 	 */
 __sys_trace:
-	mov	r1, scno
 	add	r0, sp, #S_OFF
 	bl	syscall_trace_enter
 	mov	scno, r0
@@ -309,14 +314,6 @@ __sys_trace_return:
 	bl	syscall_trace_exit
 	b	ret_slow_syscall
 
-	.align	5
-#ifdef CONFIG_ALIGNMENT_TRAP
-	.type	__cr_alignment, #object
-__cr_alignment:
-	.word	cr_alignment
-#endif
-	.ltorg
-
 	.macro	syscall_table_start, sym
 	.equ	__sys_nr, 0
 	.type	\sym, #object
@@ -344,20 +341,19 @@ ENTRY(\sym)
 	.size	\sym, . - \sym
 	.endm
 
-#define NATIVE(nr, func) syscall nr, func
+#define __SYSCALL_WITH_COMPAT(nr, native, compat)	__SYSCALL(nr, native)
+#define __SYSCALL(nr, func) syscall nr, func
 
 /*
  * This is the syscall table declaration for native ABI syscalls.
  * With EABI a couple syscalls are obsolete and defined as sys_ni_syscall.
  */
 	syscall_table_start sys_call_table
-#define COMPAT(nr, native, compat) syscall nr, native
 #ifdef CONFIG_AEABI
 #include <calls-eabi.S>
 #else
 #include <calls-oabi.S>
 #endif
-#undef COMPAT
 	syscall_table_end sys_call_table
 
 /*============================================================================
@@ -455,7 +451,8 @@ ENDPROC(sys_oabi_readahead)
  * using the compatibility syscall entries.
  */
 	syscall_table_start sys_oabi_call_table
-#define COMPAT(nr, native, compat) syscall nr, compat
+#undef __SYSCALL_WITH_COMPAT
+#define __SYSCALL_WITH_COMPAT(nr, native, compat)	__SYSCALL(nr, compat)
 #include <calls-oabi.S>
 	syscall_table_end sys_oabi_call_table
 
diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S
index a74289ebc803..3e7bcaca5e07 100644
--- a/arch/arm/kernel/entry-ftrace.S
+++ b/arch/arm/kernel/entry-ftrace.S
@@ -22,12 +22,9 @@
  * mcount can be thought of as a function called in the middle of a subroutine
  * call.  As such, it needs to be transparent for both the caller and the
  * callee: the original lr needs to be restored when leaving mcount, and no
- * registers should be clobbered.  (In the __gnu_mcount_nc implementation, we
- * clobber the ip register.  This is OK because the ARM calling convention
- * allows it to be clobbered in subroutines and doesn't use it to hold
- * parameters.)
+ * registers should be clobbered.
  *
- * When using dynamic ftrace, we patch out the mcount call by a "pop {lr}"
+ * When using dynamic ftrace, we patch out the mcount call by a "add sp, #4"
  * instead of the __gnu_mcount_nc call (see arch/arm/kernel/ftrace.c).
  */
 
@@ -38,23 +35,20 @@
 
 .macro __mcount suffix
 	mcount_enter
-	ldr	r0, =ftrace_trace_function
-	ldr	r2, [r0]
-	adr	r0, .Lftrace_stub
+	ldr_va	r2, ftrace_trace_function
+	badr	r0, .Lftrace_stub
 	cmp	r0, r2
 	bne	1f
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	ldr     r1, =ftrace_graph_return
-	ldr     r2, [r1]
-	cmp     r0, r2
-	bne     ftrace_graph_caller\suffix
-
-	ldr     r1, =ftrace_graph_entry
-	ldr     r2, [r1]
-	ldr     r0, =ftrace_graph_entry_stub
-	cmp     r0, r2
-	bne     ftrace_graph_caller\suffix
+	ldr_va	r2, ftrace_graph_return
+	cmp	r0, r2
+	bne	ftrace_graph_caller\suffix
+
+	ldr_va	r2, ftrace_graph_entry
+	mov_l	r0, ftrace_graph_entry_stub
+	cmp	r0, r2
+	bne	ftrace_graph_caller\suffix
 #endif
 
 	mcount_exit
@@ -70,29 +64,27 @@
 
 .macro __ftrace_regs_caller
 
-	sub	sp, sp, #8	@ space for PC and CPSR OLD_R0,
+	str	lr, [sp, #-8]!	@ store LR as PC and make space for CPSR/OLD_R0,
 				@ OLD_R0 will overwrite previous LR
 
-	add 	ip, sp, #12	@ move in IP the value of SP as it was
-				@ before the push {lr} of the mcount mechanism
+	ldr	lr, [sp, #8]    @ get previous LR
 
-	str     lr, [sp, #0]    @ store LR instead of PC
+	str	r0, [sp, #8]	@ write r0 as OLD_R0 over previous LR
 
-	ldr     lr, [sp, #8]    @ get previous LR
+	str	lr, [sp, #-4]!	@ store previous LR as LR
 
-	str	r0, [sp, #8]	@ write r0 as OLD_R0 over previous LR
+	add 	lr, sp, #16	@ move in LR the value of SP as it was
+				@ before the push {lr} of the mcount mechanism
 
-	stmdb   sp!, {ip, lr}
-	stmdb   sp!, {r0-r11, lr}
+	push	{r0-r11, ip, lr}
 
 	@ stack content at this point:
 	@ 0  4          48   52       56            60   64    68       72
-	@ R0 | R1 | ... | LR | SP + 4 | previous LR | LR | PSR | OLD_R0 |
+	@ R0 | R1 | ... | IP | SP + 4 | previous LR | LR | PSR | OLD_R0 |
 
-	mov r3, sp				@ struct pt_regs*
+	mov	r3, sp				@ struct pt_regs*
 
-	ldr r2, =function_trace_op
-	ldr r2, [r2]				@ pointer to the current
+	ldr_va	r2, function_trace_op		@ pointer to the current
 						@ function tracing op
 
 	ldr	r1, [sp, #S_LR]			@ lr of instrumented func
@@ -108,35 +100,37 @@ ftrace_regs_call:
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	.globl ftrace_graph_regs_call
 ftrace_graph_regs_call:
-	mov	r0, r0
+ARM(	mov	r0, r0	)
+THUMB(	nop.w		)
 #endif
 
 	@ pop saved regs
-	ldmia   sp!, {r0-r12}			@ restore r0 through r12
-	ldr	ip, [sp, #8]			@ restore PC
-	ldr	lr, [sp, #4]			@ restore LR
-	ldr	sp, [sp, #0]			@ restore SP
-	mov	pc, ip				@ return
+	pop	{r0-r11, ip, lr}		@ restore r0 through r12
+	ldr	lr, [sp], #4			@ restore LR
+	ldr	pc, [sp], #12
 .endm
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 .macro __ftrace_graph_regs_caller
 
-	sub     r0, fp, #4              @ lr of instrumented routine (parent)
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+	sub	r0, fp, #4		@ lr of instrumented routine (parent)
+#else
+	add	r0, sp, #S_LR
+#endif
 
 	@ called from __ftrace_regs_caller
-	ldr     r1, [sp, #S_PC]		@ instrumented routine (func)
+	ldr	r1, [sp, #S_PC]		@ instrumented routine (func)
 	mcount_adjust_addr	r1, r1
 
-	mov	r2, fp			@ frame pointer
+	mov	r2, fpreg		@ frame pointer
+	add	r3, sp, #PT_REGS_SIZE
 	bl	prepare_ftrace_return
 
 	@ pop registers saved in ftrace_regs_caller
-	ldmia   sp!, {r0-r12}			@ restore r0 through r12
-	ldr	ip, [sp, #8]			@ restore PC
-	ldr	lr, [sp, #4]			@ restore LR
-	ldr	sp, [sp, #0]			@ restore SP
-	mov	pc, ip				@ return
+	pop	{r0-r11, ip, lr}		@ restore r0 through r12
+	ldr	lr, [sp], #4			@ restore LR
+	ldr	pc, [sp], #12
 
 .endm
 #endif
@@ -149,8 +143,7 @@ ftrace_graph_regs_call:
 	mcount_adjust_addr	r0, lr		@ instrumented function
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
-	ldr r2, =function_trace_op
-	ldr r2, [r2]				@ pointer to the current
+	ldr_va	r2, function_trace_op		@ pointer to the current
 						@ function tracing op
 	mov r3, #0				@ regs is NULL
 #endif
@@ -162,14 +155,19 @@ ftrace_call\suffix:
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	.globl ftrace_graph_call\suffix
 ftrace_graph_call\suffix:
-	mov	r0, r0
+ARM(	mov	r0, r0	)
+THUMB(	nop.w		)
 #endif
 
 	mcount_exit
 .endm
 
 .macro __ftrace_graph_caller
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
 	sub	r0, fp, #4		@ &lr of instrumented routine (&parent)
+#else
+	add	r0, sp, #20
+#endif
 #ifdef CONFIG_DYNAMIC_FTRACE
 	@ called from __ftrace_caller, saved in mcount_enter
 	ldr	r1, [sp, #16]		@ instrumented routine (func)
@@ -178,7 +176,8 @@ ftrace_graph_call\suffix:
 	@ called from __mcount, untouched in lr
 	mcount_adjust_addr	r1, lr	@ instrumented routine (func)
 #endif
-	mov	r2, fp			@ frame pointer
+	mov	r2, fpreg		@ frame pointer
+	add	r3, sp, #24
 	bl	prepare_ftrace_return
 	mcount_exit
 .endm
@@ -202,16 +201,17 @@ ftrace_graph_call\suffix:
 .endm
 
 .macro mcount_exit
-	ldmia	sp!, {r0-r3, ip, lr}
-	ret	ip
+	ldmia	sp!, {r0-r3}
+	ldr	lr, [sp, #4]
+	ldr	pc, [sp], #8
 .endm
 
 ENTRY(__gnu_mcount_nc)
 UNWIND(.fnstart)
 #ifdef CONFIG_DYNAMIC_FTRACE
-	mov	ip, lr
-	ldmia	sp!, {lr}
-	ret	ip
+	push	{lr}
+	ldr	lr, [sp, #4]
+	ldr	pc, [sp], #8
 #else
 	__mcount
 #endif
@@ -256,17 +256,33 @@ ENDPROC(ftrace_graph_regs_caller)
 .purgem mcount_exit
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	.globl return_to_handler
-return_to_handler:
+ENTRY(return_to_handler)
 	stmdb	sp!, {r0-r3}
-	mov	r0, fp			@ frame pointer
+	add	r0, sp, #16		@ sp at exit of instrumented routine
 	bl	ftrace_return_to_handler
 	mov	lr, r0			@ r0 has real ret addr
 	ldmia	sp!, {r0-r3}
 	ret	lr
+ENDPROC(return_to_handler)
 #endif
 
 ENTRY(ftrace_stub)
 .Lftrace_stub:
 	ret	lr
 ENDPROC(ftrace_stub)
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+	__INIT
+
+	.macro	init_tramp, dst:req
+ENTRY(\dst\()_from_init)
+	ldr	pc, =\dst
+ENDPROC(\dst\()_from_init)
+	.endm
+
+	init_tramp	ftrace_caller
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+	init_tramp	ftrace_regs_caller
+#endif
+#endif
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 40db0f9188b6..99411fa91350 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -48,8 +48,7 @@
 	.macro	alignment_trap, rtmp1, rtmp2, label
 #ifdef CONFIG_ALIGNMENT_TRAP
 	mrc	p15, 0, \rtmp2, c1, c0, 0
-	ldr	\rtmp1, \label
-	ldr	\rtmp1, [\rtmp1]
+	ldr_va	\rtmp1, \label
 	teq	\rtmp1, \rtmp2
 	mcrne	p15, 0, \rtmp1, c1, c0, 0
 #endif
@@ -292,6 +291,20 @@
 
 
 	.macro	restore_user_regs, fast = 0, offset = 0
+#if defined(CONFIG_CPU_32v6K) && \
+    (!defined(CONFIG_CPU_V6) || defined(CONFIG_SMP))
+#ifdef CONFIG_CPU_V6
+ALT_SMP(nop)
+ALT_UP_B(.L1_\@)
+#endif
+	@ The TLS register update is deferred until return to user space so we
+	@ can use it for other things while running in the kernel
+	mrc	p15, 0, r1, c13, c0, 3		@ get current_thread_info pointer
+	ldr	r1, [r1, #TI_TP_VALUE]
+	mcr	p15, 0, r1, c13, c0, 3		@ set TLS register
+.L1_\@:
+#endif
+
 	uaccess_enable r1, isb=0
 #ifndef CONFIG_THUMB2_KERNEL
 	@ ARM mode restore
@@ -353,25 +366,25 @@
  * between user and kernel mode.
  */
 	.macro ct_user_exit, save = 1
-#ifdef CONFIG_CONTEXT_TRACKING
+#ifdef CONFIG_CONTEXT_TRACKING_USER
 	.if	\save
 	stmdb   sp!, {r0-r3, ip, lr}
-	bl	context_tracking_user_exit
+	bl	user_exit_callable
 	ldmia	sp!, {r0-r3, ip, lr}
 	.else
-	bl	context_tracking_user_exit
+	bl	user_exit_callable
 	.endif
 #endif
 	.endm
 
 	.macro ct_user_enter, save = 1
-#ifdef CONFIG_CONTEXT_TRACKING
+#ifdef CONFIG_CONTEXT_TRACKING_USER
 	.if	\save
 	stmdb   sp!, {r0-r3, ip, lr}
-	bl	context_tracking_user_enter
+	bl	user_enter_callable
 	ldmia	sp!, {r0-r3, ip, lr}
 	.else
-	bl	context_tracking_user_enter
+	bl	user_enter_callable
 	.endif
 #endif
 	.endm
@@ -415,3 +428,40 @@ scno	.req	r7		@ syscall number
 tbl	.req	r8		@ syscall table pointer
 why	.req	r8		@ Linux syscall (!= 0)
 tsk	.req	r9		@ current thread_info
+
+	.macro	do_overflow_check, frame_size:req
+#ifdef CONFIG_VMAP_STACK
+	@
+	@ Test whether the SP has overflowed. Task and IRQ stacks are aligned
+	@ so that SP & BIT(THREAD_SIZE_ORDER + PAGE_SHIFT) should always be
+	@ zero.
+	@
+ARM(	tst	sp, #1 << (THREAD_SIZE_ORDER + PAGE_SHIFT)	)
+THUMB(	tst	r1, #1 << (THREAD_SIZE_ORDER + PAGE_SHIFT)	)
+THUMB(	it	ne						)
+	bne	.Lstack_overflow_check\@
+
+	.pushsection	.text
+.Lstack_overflow_check\@:
+	@
+	@ The stack pointer is not pointing to a valid vmap'ed stack, but it
+	@ may be pointing into the linear map instead, which may happen if we
+	@ are already running from the overflow stack. We cannot detect overflow
+	@ in such cases so just carry on.
+	@
+	str	ip, [r0, #12]			@ Stash IP on the mode stack
+	ldr_va	ip, high_memory			@ Start of VMALLOC space
+ARM(	cmp	sp, ip			)	@ SP in vmalloc space?
+THUMB(	cmp	r1, ip			)
+THUMB(	itt	lo			)
+	ldrlo	ip, [r0, #12]			@ Restore IP
+	blo	.Lout\@				@ Carry on
+
+THUMB(	sub	r1, sp, r1		)	@ Restore original R1
+THUMB(	sub	sp, r1			)	@ Restore original SP
+	add	sp, sp, #\frame_size		@ Undo svc_entry's SP change
+	b	__bad_stack			@ Handle VMAP stack overflow
+	.popsection
+.Lout\@:
+#endif
+	.endm
diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S
index d0e898608d30..de8a60363c85 100644
--- a/arch/arm/kernel/entry-v7m.S
+++ b/arch/arm/kernel/entry-v7m.S
@@ -23,7 +23,7 @@ __invalid_entry:
 	adr	r0, strerr
 	mrs	r1, ipsr
 	mov	r2, lr
-	bl	printk
+	bl	_printk
 #endif
 	mov	r0, sp
 	bl	show_regs
@@ -39,16 +39,25 @@ __irq_entry:
 	@
 	@ Invoke the IRQ handler
 	@
-	mrs	r0, ipsr
-	ldr	r1, =V7M_xPSR_EXCEPTIONNO
-	and	r0, r1
-	sub	r0, #16
-	mov	r1, sp
-	stmdb	sp!, {lr}
-	@ routine called with r0 = irq number, r1 = struct pt_regs *
-	bl	nvic_handle_irq
-
-	pop	{lr}
+	mov	r0, sp
+	ldr_this_cpu sp, irq_stack_ptr, r1, r2
+
+	@
+	@ If we took the interrupt while running in the kernel, we may already
+	@ be using the IRQ stack, so revert to the original value in that case.
+	@
+	subs	r2, sp, r0		@ SP above bottom of IRQ stack?
+	rsbscs	r2, r2, #THREAD_SIZE	@ ... and below the top?
+	movcs	sp, r0
+
+	push	{r0, lr}		@ preserve LR and original SP
+
+	@ routine called with r0 = struct pt_regs *
+	bl	generic_handle_arch_irq
+
+	pop	{r0, lr}
+	mov	sp, r0
+
 	@
 	@ Check for any pending work if returning to user
 	@
@@ -101,15 +110,17 @@ ENTRY(__switch_to)
 	str	sp, [ip], #4
 	str	lr, [ip], #4
 	mov	r5, r0
+	mov	r6, r2			@ Preserve 'next'
 	add	r4, r2, #TI_CPU_SAVE
 	ldr	r0, =thread_notify_head
 	mov	r1, #THREAD_NOTIFY_SWITCH
 	bl	atomic_notifier_call_chain
-	mov	ip, r4
 	mov	r0, r5
-	ldmia	ip!, {r4 - r11}		@ Load all regs saved previously
-	ldr	sp, [ip]
-	ldr	pc, [ip, #4]!
+	mov	r1, r6
+	ldmia	r4, {r4 - r12, lr}	@ Load all regs saved previously
+	set_current r1, r2
+	mov	sp, ip
+	bx	lr
 	.fnend
 ENDPROC(__switch_to)
 
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index 9a79ef6b1876..a0b6d1e3812f 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -22,12 +22,24 @@
 #include <asm/ftrace.h>
 #include <asm/insn.h>
 #include <asm/set_memory.h>
+#include <asm/stacktrace.h>
 #include <asm/patch.h>
 
+/*
+ * The compiler emitted profiling hook consists of
+ *
+ *   PUSH    {LR}
+ *   BL	     __gnu_mcount_nc
+ *
+ * To turn this combined sequence into a NOP, we need to restore the value of
+ * SP before the PUSH. Let's use an ADD rather than a POP into LR, as LR is not
+ * modified anyway, and reloading LR from memory is highly likely to be less
+ * efficient.
+ */
 #ifdef CONFIG_THUMB2_KERNEL
-#define	NOP		0xf85deb04	/* pop.w {lr} */
+#define	NOP		0xf10d0d04	/* add.w sp, sp, #4 */
 #else
-#define	NOP		0xe8bd4000	/* pop {lr} */
+#define	NOP		0xe28dd004	/* add   sp, sp, #4 */
 #endif
 
 #ifdef CONFIG_DYNAMIC_FTRACE
@@ -51,26 +63,36 @@ static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
 	return NOP;
 }
 
-static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr)
+void ftrace_caller_from_init(void);
+void ftrace_regs_caller_from_init(void);
+
+static unsigned long __ref adjust_address(struct dyn_ftrace *rec,
+					  unsigned long addr)
 {
-	return addr;
+	if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE) ||
+	    system_state >= SYSTEM_FREEING_INITMEM ||
+	    likely(!is_kernel_inittext(rec->ip)))
+		return addr;
+	if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_REGS) ||
+	    addr == (unsigned long)&ftrace_caller)
+		return (unsigned long)&ftrace_caller_from_init;
+	return (unsigned long)&ftrace_regs_caller_from_init;
 }
 
-int ftrace_arch_code_modify_prepare(void)
+void ftrace_arch_code_modify_prepare(void)
 {
-	return 0;
 }
 
-int ftrace_arch_code_modify_post_process(void)
+void ftrace_arch_code_modify_post_process(void)
 {
 	/* Make sure any TLB misses during machine stop are cleared. */
 	flush_tlb_all();
-	return 0;
 }
 
-static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr,
+					 bool warn)
 {
-	return arm_gen_branch_link(pc, addr);
+	return arm_gen_branch_link(pc, addr, warn);
 }
 
 static int ftrace_modify_code(unsigned long pc, unsigned long old,
@@ -104,14 +126,14 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 	int ret;
 
 	pc = (unsigned long)&ftrace_call;
-	new = ftrace_call_replace(pc, (unsigned long)func);
+	new = ftrace_call_replace(pc, (unsigned long)func, true);
 
 	ret = ftrace_modify_code(pc, 0, new, false);
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
 	if (!ret) {
 		pc = (unsigned long)&ftrace_regs_call;
-		new = ftrace_call_replace(pc, (unsigned long)func);
+		new = ftrace_call_replace(pc, (unsigned long)func, true);
 
 		ret = ftrace_modify_code(pc, 0, new, false);
 	}
@@ -124,10 +146,22 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned long new, old;
 	unsigned long ip = rec->ip;
+	unsigned long aaddr = adjust_address(rec, addr);
+	struct module *mod = NULL;
+
+#ifdef CONFIG_ARM_MODULE_PLTS
+	mod = rec->arch.mod;
+#endif
 
 	old = ftrace_nop_replace(rec);
 
-	new = ftrace_call_replace(ip, adjust_address(rec, addr));
+	new = ftrace_call_replace(ip, aaddr, !mod);
+#ifdef CONFIG_ARM_MODULE_PLTS
+	if (!new && mod) {
+		aaddr = get_module_plt(mod, ip, aaddr);
+		new = ftrace_call_replace(ip, aaddr, true);
+	}
+#endif
 
 	return ftrace_modify_code(rec->ip, old, new, true);
 }
@@ -140,9 +174,9 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
 	unsigned long new, old;
 	unsigned long ip = rec->ip;
 
-	old = ftrace_call_replace(ip, adjust_address(rec, old_addr));
+	old = ftrace_call_replace(ip, adjust_address(rec, old_addr), true);
 
-	new = ftrace_call_replace(ip, adjust_address(rec, addr));
+	new = ftrace_call_replace(ip, adjust_address(rec, addr), true);
 
 	return ftrace_modify_code(rec->ip, old, new, true);
 }
@@ -152,27 +186,47 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
 int ftrace_make_nop(struct module *mod,
 		    struct dyn_ftrace *rec, unsigned long addr)
 {
+	unsigned long aaddr = adjust_address(rec, addr);
 	unsigned long ip = rec->ip;
 	unsigned long old;
 	unsigned long new;
 	int ret;
 
-	old = ftrace_call_replace(ip, adjust_address(rec, addr));
+#ifdef CONFIG_ARM_MODULE_PLTS
+	/* mod is only supplied during module loading */
+	if (!mod)
+		mod = rec->arch.mod;
+	else
+		rec->arch.mod = mod;
+#endif
+
+	old = ftrace_call_replace(ip, aaddr,
+				  !IS_ENABLED(CONFIG_ARM_MODULE_PLTS) || !mod);
+#ifdef CONFIG_ARM_MODULE_PLTS
+	if (!old && mod) {
+		aaddr = get_module_plt(mod, ip, aaddr);
+		old = ftrace_call_replace(ip, aaddr, true);
+	}
+#endif
+
 	new = ftrace_nop_replace(rec);
-	ret = ftrace_modify_code(ip, old, new, true);
+	/*
+	 * Locations in .init.text may call __gnu_mcount_mc via a linker
+	 * emitted veneer if they are too far away from its implementation, and
+	 * so validation may fail spuriously in such cases. Let's work around
+	 * this by omitting those from validation.
+	 */
+	ret = ftrace_modify_code(ip, old, new, !is_kernel_inittext(ip));
 
 	return ret;
 }
-
-int __init ftrace_dyn_arch_init(void)
-{
-	return 0;
-}
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
+asmlinkage
 void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
-			   unsigned long frame_pointer)
+			   unsigned long frame_pointer,
+			   unsigned long stack_pointer)
 {
 	unsigned long return_hooker = (unsigned long) &return_to_handler;
 	unsigned long old;
@@ -180,6 +234,23 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
 
+	if (IS_ENABLED(CONFIG_UNWINDER_FRAME_POINTER)) {
+		/* FP points one word below parent's top of stack */
+		frame_pointer += 4;
+	} else {
+		struct stackframe frame = {
+			.fp = frame_pointer,
+			.sp = stack_pointer,
+			.lr = self_addr,
+			.pc = self_addr,
+		};
+		if (unwind_frame(&frame) < 0)
+			return;
+		if (frame.lr != self_addr)
+			parent = frame.lr_addr;
+		frame_pointer = frame.sp;
+	}
+
 	old = *parent;
 	*parent = return_hooker;
 
@@ -200,7 +271,7 @@ static int __ftrace_modify_caller(unsigned long *callsite,
 	unsigned long caller_fn = (unsigned long) func;
 	unsigned long pc = (unsigned long) callsite;
 	unsigned long branch = arm_gen_branch(pc, caller_fn);
-	unsigned long nop = 0xe1a00000;	/* mov r0, r0 */
+	unsigned long nop = arm_gen_nop();
 	unsigned long old = enable ? nop : branch;
 	unsigned long new = enable ? branch : nop;
 
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 29b2eda136bb..42cae73fcc19 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -105,6 +105,9 @@ __mmap_switched:
 	mov	r1, #0
 	bl	__memset			@ clear .bss
 
+	adr_l	r0, init_task			@ get swapper task_struct
+	set_current r0, r1
+
 	ldmia	r4, {r0, r1, r2, r3}
 	str	r9, [r0]			@ Save processor ID
 	str	r7, [r1]			@ Save machine type
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 0fc814bbc34b..950bef83339f 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -114,7 +114,9 @@ ENTRY(secondary_startup)
 	add	r12, r12, r10
 	ret	r12
 1:	bl	__after_proc_init
+	ldr	r7, __secondary_data		@ reload r7
 	ldr	sp, [r7, #12]			@ set up the stack pointer
+	ldr	r0, [r7, #16]			@ set up task pointer
 	mov	fp, #0
 	b	secondary_start_kernel
 ENDPROC(secondary_startup)
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 7f62c5eccdf3..656991055bc1 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -23,7 +23,6 @@
 #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING)
 #include CONFIG_DEBUG_LL_INCLUDE
 #endif
-
 /*
  * swapper_pg_dir is the virtual address of the initial page table.
  * We place the page tables 16K below KERNEL_RAM_VADDR.  Therefore, we must
@@ -31,7 +30,7 @@
  * the least significant 16 bits to be 0x8000, but we could probably
  * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000.
  */
-#define KERNEL_RAM_VADDR	(PAGE_OFFSET + TEXT_OFFSET)
+#define KERNEL_RAM_VADDR	(KERNEL_OFFSET + TEXT_OFFSET)
 #if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
 #error KERNEL_RAM_VADDR must start at 0xXXXX8000
 #endif
@@ -39,15 +38,32 @@
 #ifdef CONFIG_ARM_LPAE
 	/* LPAE requires an additional page for the PGD */
 #define PG_DIR_SIZE	0x5000
-#define PMD_ORDER	3
+#define PMD_ENTRY_ORDER	3	/* PMD entry size is 2^PMD_ENTRY_ORDER */
 #else
 #define PG_DIR_SIZE	0x4000
-#define PMD_ORDER	2
+#define PMD_ENTRY_ORDER	2
 #endif
 
 	.globl	swapper_pg_dir
 	.equ	swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE
 
+	/*
+	 * This needs to be assigned at runtime when the linker symbols are
+	 * resolved. These are unsigned 64bit really, but in this assembly code
+	 * We store them as 32bit.
+	 */
+	.pushsection .data
+	.align	2
+	.globl	kernel_sec_start
+	.globl	kernel_sec_end
+kernel_sec_start:
+	.long	0
+	.long	0
+kernel_sec_end:
+	.long	0
+	.long	0
+	.popsection
+
 	.macro	pgtbl, rd, phys
 	add	\rd, \phys, #TEXT_OFFSET
 	sub	\rd, \rd, #PG_DIR_SIZE
@@ -224,22 +240,37 @@ __create_page_tables:
 	mov	r6, r6, lsr #SECTION_SHIFT
 
 1:	orr	r3, r7, r5, lsl #SECTION_SHIFT	@ flags + kernel base
-	str	r3, [r4, r5, lsl #PMD_ORDER]	@ identity mapping
+	str	r3, [r4, r5, lsl #PMD_ENTRY_ORDER]	@ identity mapping
 	cmp	r5, r6
 	addlo	r5, r5, #1			@ next section
 	blo	1b
 
 	/*
-	 * Map our RAM from the start to the end of the kernel .bss section.
+	 * The main matter: map in the kernel using section mappings, and
+	 * set two variables to indicate the physical start and end of the
+	 * kernel.
 	 */
-	add	r0, r4, #PAGE_OFFSET >> (SECTION_SHIFT - PMD_ORDER)
+	add	r0, r4, #KERNEL_OFFSET >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	ldr	r6, =(_end - 1)
-	orr	r3, r8, r7
-	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
-1:	str	r3, [r0], #1 << PMD_ORDER
+	adr_l	r5, kernel_sec_start		@ _pa(kernel_sec_start)
+#if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
+	str	r8, [r5, #4]			@ Save physical start of kernel (BE)
+#else
+	str	r8, [r5]			@ Save physical start of kernel (LE)
+#endif
+	orr	r3, r8, r7			@ Add the MMU flags
+	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ENTRY_ORDER)
+1:	str	r3, [r0], #1 << PMD_ENTRY_ORDER
 	add	r3, r3, #1 << SECTION_SHIFT
 	cmp	r0, r6
 	bls	1b
+	eor	r3, r3, r7			@ Remove the MMU flags
+	adr_l	r5, kernel_sec_end		@ _pa(kernel_sec_end)
+#if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
+	str	r3, [r5, #4]			@ Save physical end of kernel (BE)
+#else
+	str	r3, [r5]			@ Save physical end of kernel (LE)
+#endif
 
 #ifdef CONFIG_XIP_KERNEL
 	/*
@@ -249,14 +280,14 @@ __create_page_tables:
 	mov	r3, pc
 	mov	r3, r3, lsr #SECTION_SHIFT
 	orr	r3, r7, r3, lsl #SECTION_SHIFT
-	add	r0, r4,  #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
-	str	r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]!
+	add	r0, r4,  #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
+	str	r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ENTRY_ORDER]!
 	ldr	r6, =(_edata_loc - 1)
-	add	r0, r0, #1 << PMD_ORDER
-	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
+	add	r0, r0, #1 << PMD_ENTRY_ORDER
+	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ENTRY_ORDER)
 1:	cmp	r0, r6
 	add	r3, r3, #1 << SECTION_SHIFT
-	strls	r3, [r0], #1 << PMD_ORDER
+	strls	r3, [r0], #1 << PMD_ENTRY_ORDER
 	bls	1b
 #endif
 
@@ -266,10 +297,10 @@ __create_page_tables:
 	 */
 	mov	r0, r2, lsr #SECTION_SHIFT
 	cmp	r2, #0
-	ldrne	r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER)
+	ldrne	r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	addne	r3, r3, r4
 	orrne	r6, r7, r0, lsl #SECTION_SHIFT
-	strne	r6, [r3], #1 << PMD_ORDER
+	strne	r6, [r3], #1 << PMD_ENTRY_ORDER
 	addne	r6, r6, #1 << SECTION_SHIFT
 	strne	r6, [r3]
 
@@ -288,7 +319,7 @@ __create_page_tables:
 	addruart r7, r3, r0
 
 	mov	r3, r3, lsr #SECTION_SHIFT
-	mov	r3, r3, lsl #PMD_ORDER
+	mov	r3, r3, lsl #PMD_ENTRY_ORDER
 
 	add	r0, r4, r3
 	mov	r3, r7, lsr #SECTION_SHIFT
@@ -313,12 +344,12 @@ __create_page_tables:
 	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
 #endif
 
-#if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
+#if defined(CONFIG_ARCH_NETWINDER)
 	/*
 	 * If we're using the NetWinder or CATS, we also need to map
 	 * in the 16550-type serial port for the debug messages
 	 */
-	add	r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER)
+	add	r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	orr	r3, r7, #0x7c000000
 	str	r3, [r0]
 #endif
@@ -328,10 +359,10 @@ __create_page_tables:
 	 * Similar reasons here - for debug.  This is
 	 * only for Acorn RiscPC architectures.
 	 */
-	add	r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER)
+	add	r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	orr	r3, r7, #0x02000000
 	str	r3, [r0]
-	add	r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER)
+	add	r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	str	r3, [r0]
 #endif
 #endif
@@ -393,8 +424,16 @@ ENDPROC(secondary_startup)
 ENDPROC(secondary_startup_arm)
 
 ENTRY(__secondary_switched)
-	ldr_l	r7, secondary_data + 12		@ get secondary_data.stack
-	mov	sp, r7
+#if defined(CONFIG_VMAP_STACK) && !defined(CONFIG_ARM_LPAE)
+	@ Before using the vmap'ed stack, we have to switch to swapper_pg_dir
+	@ as the ID map does not cover the vmalloc region.
+	mrc	p15, 0, ip, c2, c0, 1	@ read TTBR1
+	mcr	p15, 0, ip, c2, c0, 0	@ set TTBR0
+	instr_sync
+#endif
+	adr_l	r7, secondary_data + 12		@ get secondary_data.stack
+	ldr	sp, [r7]
+	ldr	r0, [r7, #4]			@ get secondary_data.task
 	mov	fp, #0
 	b	secondary_start_kernel
 ENDPROC(__secondary_switched)
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 08660ae9dcbc..054e9199f30d 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -886,7 +886,7 @@ static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs)
 			info->trigger = addr;
 			pr_debug("breakpoint fired: address = 0x%x\n", addr);
 			perf_bp_event(bp, regs);
-			if (!bp->overflow_handler)
+			if (is_default_overflow_handler(bp))
 				enable_single_step(bp, addr);
 			goto unlock;
 		}
@@ -941,6 +941,23 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 	return ret;
 }
 
+#ifdef CONFIG_ARM_ERRATA_764319
+static int oslsr_fault;
+
+static int debug_oslsr_trap(struct pt_regs *regs, unsigned int instr)
+{
+	oslsr_fault = 1;
+	instruction_pointer(regs) += 4;
+	return 0;
+}
+
+static struct undef_hook debug_oslsr_hook = {
+	.instr_mask  = 0xffffffff,
+	.instr_val = 0xee115e91,
+	.fn = debug_oslsr_trap,
+};
+#endif
+
 /*
  * One-time initialisation.
  */
@@ -974,7 +991,16 @@ static bool core_has_os_save_restore(void)
 	case ARM_DEBUG_ARCH_V7_1:
 		return true;
 	case ARM_DEBUG_ARCH_V7_ECP14:
+#ifdef CONFIG_ARM_ERRATA_764319
+		oslsr_fault = 0;
+		register_undef_hook(&debug_oslsr_hook);
 		ARM_DBG_READ(c1, c1, 4, oslsr);
+		unregister_undef_hook(&debug_oslsr_hook);
+		if (oslsr_fault)
+			return false;
+#else
+		ARM_DBG_READ(c1, c1, 4, oslsr);
+#endif
 		if (oslsr & ARM_OSLSR_OSLM0)
 			return true;
 		fallthrough;
diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S
index b699b22a4db1..3a506b9095a5 100644
--- a/arch/arm/kernel/hyp-stub.S
+++ b/arch/arm/kernel/hyp-stub.S
@@ -9,6 +9,8 @@
 #include <asm/assembler.h>
 #include <asm/virt.h>
 
+.arch armv7-a
+
 #ifndef ZIMAGE
 /*
  * For the kernel proper, we need to find out the CPU boot mode long after
diff --git a/arch/arm/kernel/insn.c b/arch/arm/kernel/insn.c
index 2e844b70386b..db0acbb7d7a0 100644
--- a/arch/arm/kernel/insn.c
+++ b/arch/arm/kernel/insn.c
@@ -3,8 +3,9 @@
 #include <linux/kernel.h>
 #include <asm/opcodes.h>
 
-static unsigned long
-__arm_gen_branch_thumb2(unsigned long pc, unsigned long addr, bool link)
+static unsigned long __arm_gen_branch_thumb2(unsigned long pc,
+					     unsigned long addr, bool link,
+					     bool warn)
 {
 	unsigned long s, j1, j2, i1, i2, imm10, imm11;
 	unsigned long first, second;
@@ -12,7 +13,7 @@ __arm_gen_branch_thumb2(unsigned long pc, unsigned long addr, bool link)
 
 	offset = (long)addr - (long)(pc + 4);
 	if (offset < -16777216 || offset > 16777214) {
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(warn);
 		return 0;
 	}
 
@@ -33,8 +34,8 @@ __arm_gen_branch_thumb2(unsigned long pc, unsigned long addr, bool link)
 	return __opcode_thumb32_compose(first, second);
 }
 
-static unsigned long
-__arm_gen_branch_arm(unsigned long pc, unsigned long addr, bool link)
+static unsigned long __arm_gen_branch_arm(unsigned long pc, unsigned long addr,
+					  bool link, bool warn)
 {
 	unsigned long opcode = 0xea000000;
 	long offset;
@@ -44,7 +45,7 @@ __arm_gen_branch_arm(unsigned long pc, unsigned long addr, bool link)
 
 	offset = (long)addr - (long)(pc + 8);
 	if (unlikely(offset < -33554432 || offset > 33554428)) {
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(warn);
 		return 0;
 	}
 
@@ -54,10 +55,10 @@ __arm_gen_branch_arm(unsigned long pc, unsigned long addr, bool link)
 }
 
 unsigned long
-__arm_gen_branch(unsigned long pc, unsigned long addr, bool link)
+__arm_gen_branch(unsigned long pc, unsigned long addr, bool link, bool warn)
 {
 	if (IS_ENABLED(CONFIG_THUMB2_KERNEL))
-		return __arm_gen_branch_thumb2(pc, addr, link);
+		return __arm_gen_branch_thumb2(pc, addr, link, warn);
 	else
-		return __arm_gen_branch_arm(pc, addr, link);
+		return __arm_gen_branch_arm(pc, addr, link, warn);
 }
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 698b6f636156..fe28fc1f759d 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -36,13 +36,54 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/cache-uniphier.h>
 #include <asm/outercache.h>
+#include <asm/softirq_stack.h>
 #include <asm/exception.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
+#include "reboot.h"
+
 unsigned long irq_err_count;
 
+#ifdef CONFIG_IRQSTACKS
+
+asmlinkage DEFINE_PER_CPU_READ_MOSTLY(u8 *, irq_stack_ptr);
+
+static void __init init_irq_stacks(void)
+{
+	u8 *stack;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		if (!IS_ENABLED(CONFIG_VMAP_STACK))
+			stack = (u8 *)__get_free_pages(GFP_KERNEL,
+						       THREAD_SIZE_ORDER);
+		else
+			stack = __vmalloc_node(THREAD_SIZE, THREAD_ALIGN,
+					       THREADINFO_GFP, NUMA_NO_NODE,
+					       __builtin_return_address(0));
+
+		if (WARN_ON(!stack))
+			break;
+		per_cpu(irq_stack_ptr, cpu) = &stack[THREAD_SIZE];
+	}
+}
+
+#ifdef CONFIG_SOFTIRQ_ON_OWN_STACK
+static void ____do_softirq(void *arg)
+{
+	__do_softirq();
+}
+
+void do_softirq_own_stack(void)
+{
+	call_with_stack(____do_softirq, NULL,
+			__this_cpu_read(irq_stack_ptr));
+}
+#endif
+#endif
+
 int arch_show_interrupts(struct seq_file *p, int prec)
 {
 #ifdef CONFIG_FIQ
@@ -63,22 +104,31 @@ int arch_show_interrupts(struct seq_file *p, int prec)
  */
 void handle_IRQ(unsigned int irq, struct pt_regs *regs)
 {
-	__handle_domain_irq(NULL, irq, false, regs);
-}
+	struct irq_desc *desc;
 
-/*
- * asm_do_IRQ is the interface to be used from assembly code.
- */
-asmlinkage void __exception_irq_entry
-asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
-{
-	handle_IRQ(irq, regs);
+	/*
+	 * Some hardware gives randomly wrong interrupts.  Rather
+	 * than crashing, do something sensible.
+	 */
+	if (unlikely(!irq || irq >= nr_irqs))
+		desc = NULL;
+	else
+		desc = irq_to_desc(irq);
+
+	if (likely(desc))
+		handle_irq_desc(desc);
+	else
+		ack_bad_irq(irq);
 }
 
 void __init init_IRQ(void)
 {
 	int ret;
 
+#ifdef CONFIG_IRQSTACKS
+	init_irq_stacks();
+#endif
+
 	if (IS_ENABLED(CONFIG_OF) && !machine_desc->init_irq)
 		irqchip_init();
 	else
diff --git a/arch/arm/kernel/isa.c b/arch/arm/kernel/isa.c
index d8a509c5d5bd..20218876bef2 100644
--- a/arch/arm/kernel/isa.c
+++ b/arch/arm/kernel/isa.c
@@ -40,27 +40,11 @@ static struct ctl_table ctl_isa_vars[4] = {
 
 static struct ctl_table_header *isa_sysctl_header;
 
-static struct ctl_table ctl_isa[2] = {
-	{
-		.procname	= "isa",
-		.mode		= 0555,
-		.child		= ctl_isa_vars,
-	}, {}
-};
-
-static struct ctl_table ctl_bus[2] = {
-	{
-		.procname	= "bus",
-		.mode		= 0555,
-		.child		= ctl_isa,
-	}, {}
-};
-
 void __init
 register_isa_ports(unsigned int membase, unsigned int portbase, unsigned int portshift)
 {
 	isa_membase = membase;
 	isa_portbase = portbase;
 	isa_portshift = portshift;
-	isa_sysctl_header = register_sysctl_table(ctl_bus);
+	isa_sysctl_header = register_sysctl("bus/isa", ctl_isa_vars);
 }
diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S
index d2b4ac06e4ed..a0218c4867b9 100644
--- a/arch/arm/kernel/iwmmxt.S
+++ b/arch/arm/kernel/iwmmxt.S
@@ -58,9 +58,19 @@
 	.text
 	.arm
 
+ENTRY(iwmmxt_undef_handler)
+	push		{r9, r10, lr}
+	get_thread_info	r10
+	mov		r9, pc
+	b		iwmmxt_task_enable
+	mov		r0, #0
+	pop		{r9, r10, pc}
+ENDPROC(iwmmxt_undef_handler)
+
 /*
  * Lazy switching of Concan coprocessor context
  *
+ * r0  = struct pt_regs pointer
  * r10 = struct thread_info pointer
  * r9  = ret_from_exception
  * lr  = undefined instr exit
@@ -84,12 +94,12 @@ ENTRY(iwmmxt_task_enable)
 	PJ4(mcr	p15, 0, r2, c1, c0, 2)
 
 	ldr	r3, =concan_owner
-	add	r0, r10, #TI_IWMMXT_STATE	@ get task Concan save area
-	ldr	r2, [sp, #60]			@ current task pc value
+	ldr	r2, [r0, #S_PC]			@ current task pc value
 	ldr	r1, [r3]			@ get current Concan owner
-	str	r0, [r3]			@ this task now owns Concan regs
 	sub	r2, r2, #4			@ adjust pc back
-	str	r2, [sp, #60]
+	str	r2, [r0, #S_PC]
+	add	r0, r10, #TI_IWMMXT_STATE	@ get task Concan save area
+	str	r0, [r3]			@ this task now owns Concan regs
 
 	mrc	p15, 0, r2, c2, c0, 0
 	mov	r2, r2				@ cpwait
diff --git a/arch/arm/kernel/jump_label.c b/arch/arm/kernel/jump_label.c
index 303b3ab87f7e..eb9c24b6e8e2 100644
--- a/arch/arm/kernel/jump_label.c
+++ b/arch/arm/kernel/jump_label.c
@@ -27,9 +27,3 @@ void arch_jump_label_transform(struct jump_entry *entry,
 {
 	__arch_jump_label_transform(entry, type, false);
 }
-
-void arch_jump_label_transform_static(struct jump_entry *entry,
-				      enum jump_label_type type)
-{
-	__arch_jump_label_transform(entry, type, true);
-}
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
index 7bd30c0a4280..22f937e6f3ff 100644
--- a/arch/arm/kernel/kgdb.c
+++ b/arch/arm/kernel/kgdb.c
@@ -154,22 +154,38 @@ static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
 	return 0;
 }
 
-static struct undef_hook kgdb_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_arm_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_BREAKINST,
-	.cpsr_mask		= MODE_MASK,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
 	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_brk_fn
 };
 
-static struct undef_hook kgdb_compiled_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_thumb_hook = {
+	.instr_mask		= 0xffff,
+	.instr_val		= KGDB_BREAKINST & 0xffff,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
+	.cpsr_val		= PSR_T_BIT | SVC_MODE,
+	.fn			= kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_arm_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_COMPILED_BREAK,
-	.cpsr_mask		= MODE_MASK,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
 	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_compiled_brk_fn
 };
 
+static struct undef_hook kgdb_compiled_brkpt_thumb_hook = {
+	.instr_mask		= 0xffff,
+	.instr_val		= KGDB_COMPILED_BREAK & 0xffff,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
+	.cpsr_val		= PSR_T_BIT | SVC_MODE,
+	.fn			= kgdb_compiled_brk_fn
+};
+
 static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 {
 	struct pt_regs *regs = args->regs;
@@ -210,8 +226,10 @@ int kgdb_arch_init(void)
 	if (ret != 0)
 		return ret;
 
-	register_undef_hook(&kgdb_brkpt_hook);
-	register_undef_hook(&kgdb_compiled_brkpt_hook);
+	register_undef_hook(&kgdb_brkpt_arm_hook);
+	register_undef_hook(&kgdb_brkpt_thumb_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
 
 	return 0;
 }
@@ -224,8 +242,10 @@ int kgdb_arch_init(void)
  */
 void kgdb_arch_exit(void)
 {
-	unregister_undef_hook(&kgdb_brkpt_hook);
-	unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+	unregister_undef_hook(&kgdb_brkpt_arm_hook);
+	unregister_undef_hook(&kgdb_brkpt_thumb_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
 	unregister_die_notifier(&kgdb_notifier);
 }
 
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 2b09dad7935e..46364b699cc3 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -73,10 +73,12 @@ void machine_kexec_cleanup(struct kimage *image)
 {
 }
 
-void machine_crash_nonpanic_core(void *unused)
+static void machine_crash_nonpanic_core(void *unused)
 {
 	struct pt_regs regs;
 
+	local_fiq_disable();
+
 	crash_setup_regs(&regs, get_irq_regs());
 	printk(KERN_DEBUG "CPU %u will stop doing anything useful since another CPU has crashed\n",
 	       smp_processor_id());
@@ -147,11 +149,6 @@ void machine_crash_shutdown(struct pt_regs *regs)
 	pr_info("Loading crashdump kernel...\n");
 }
 
-/*
- * Function pointer to optional machine-specific reinitialization
- */
-void (*kexec_reinit)(void);
-
 void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list, reboot_entry_phys;
@@ -187,9 +184,6 @@ void machine_kexec(struct kimage *image)
 
 	pr_info("Bye!\n");
 
-	if (kexec_reinit)
-		kexec_reinit();
-
 	soft_restart(reboot_entry_phys);
 }
 
diff --git a/arch/arm/kernel/module-plts.c b/arch/arm/kernel/module-plts.c
index 6e626abaefc5..f5a43fd8c163 100644
--- a/arch/arm/kernel/module-plts.c
+++ b/arch/arm/kernel/module-plts.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/elf.h>
+#include <linux/ftrace.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/sort.h>
@@ -12,10 +13,6 @@
 #include <asm/cache.h>
 #include <asm/opcodes.h>
 
-#define PLT_ENT_STRIDE		L1_CACHE_BYTES
-#define PLT_ENT_COUNT		(PLT_ENT_STRIDE / sizeof(u32))
-#define PLT_ENT_SIZE		(sizeof(struct plt_entries) / PLT_ENT_COUNT)
-
 #ifdef CONFIG_THUMB2_KERNEL
 #define PLT_ENT_LDR		__opcode_to_mem_thumb32(0xf8dff000 | \
 							(PLT_ENT_STRIDE - 4))
@@ -24,24 +21,47 @@
 						    (PLT_ENT_STRIDE - 8))
 #endif
 
-struct plt_entries {
-	u32	ldr[PLT_ENT_COUNT];
-	u32	lit[PLT_ENT_COUNT];
+static const u32 fixed_plts[] = {
+#ifdef CONFIG_DYNAMIC_FTRACE
+	FTRACE_ADDR,
+	MCOUNT_ADDR,
+#endif
 };
 
-static bool in_init(const struct module *mod, unsigned long loc)
+static void prealloc_fixed(struct mod_plt_sec *pltsec, struct plt_entries *plt)
 {
-	return loc - (u32)mod->init_layout.base < mod->init_layout.size;
+	int i;
+
+	if (!ARRAY_SIZE(fixed_plts) || pltsec->plt_count)
+		return;
+	pltsec->plt_count = ARRAY_SIZE(fixed_plts);
+
+	for (i = 0; i < ARRAY_SIZE(plt->ldr); ++i)
+		plt->ldr[i] = PLT_ENT_LDR;
+
+	BUILD_BUG_ON(sizeof(fixed_plts) > sizeof(plt->lit));
+	memcpy(plt->lit, fixed_plts, sizeof(fixed_plts));
 }
 
 u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
 {
-	struct mod_plt_sec *pltsec = !in_init(mod, loc) ? &mod->arch.core :
-							  &mod->arch.init;
+	struct mod_plt_sec *pltsec = !within_module_init(loc, mod) ?
+						&mod->arch.core : &mod->arch.init;
+	struct plt_entries *plt;
+	int idx;
+
+	/* cache the address, ELF header is available only during module load */
+	if (!pltsec->plt_ent)
+		pltsec->plt_ent = (struct plt_entries *)pltsec->plt->sh_addr;
+	plt = pltsec->plt_ent;
+
+	prealloc_fixed(pltsec, plt);
 
-	struct plt_entries *plt = (struct plt_entries *)pltsec->plt->sh_addr;
-	int idx = 0;
+	for (idx = 0; idx < ARRAY_SIZE(fixed_plts); ++idx)
+		if (plt->lit[idx] == val)
+			return (u32)&plt->ldr[idx];
 
+	idx = 0;
 	/*
 	 * Look for an existing entry pointing to 'val'. Given that the
 	 * relocations are sorted, this will be the last entry we allocated.
@@ -189,8 +209,8 @@ static unsigned int count_plts(const Elf32_Sym *syms, Elf32_Addr base,
 int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 			      char *secstrings, struct module *mod)
 {
-	unsigned long core_plts = 0;
-	unsigned long init_plts = 0;
+	unsigned long core_plts = ARRAY_SIZE(fixed_plts);
+	unsigned long init_plts = ARRAY_SIZE(fixed_plts);
 	Elf32_Shdr *s, *sechdrs_end = sechdrs + ehdr->e_shnum;
 	Elf32_Sym *syms = NULL;
 
@@ -245,6 +265,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 	mod->arch.core.plt->sh_size = round_up(core_plts * PLT_ENT_SIZE,
 					       sizeof(struct plt_entries));
 	mod->arch.core.plt_count = 0;
+	mod->arch.core.plt_ent = NULL;
 
 	mod->arch.init.plt->sh_type = SHT_NOBITS;
 	mod->arch.init.plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
@@ -252,8 +273,23 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 	mod->arch.init.plt->sh_size = round_up(init_plts * PLT_ENT_SIZE,
 					       sizeof(struct plt_entries));
 	mod->arch.init.plt_count = 0;
+	mod->arch.init.plt_ent = NULL;
 
 	pr_debug("%s: plt=%x, init.plt=%x\n", __func__,
 		 mod->arch.core.plt->sh_size, mod->arch.init.plt->sh_size);
 	return 0;
 }
+
+bool in_module_plt(unsigned long loc)
+{
+	struct module *mod;
+	bool ret;
+
+	preempt_disable();
+	mod = __module_text_address(loc);
+	ret = mod && (loc - (u32)mod->arch.core.plt_ent < mod->arch.core.plt_count * PLT_ENT_SIZE ||
+		      loc - (u32)mod->arch.init.plt_ent < mod->arch.init.plt_count * PLT_ENT_SIZE);
+	preempt_enable();
+
+	return ret;
+}
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index beac45e89ba6..d59c36dc0494 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -68,6 +68,44 @@ bool module_exit_section(const char *name)
 		strstarts(name, ".ARM.exidx.exit");
 }
 
+#ifdef CONFIG_ARM_HAS_GROUP_RELOCS
+/*
+ * This implements the partitioning algorithm for group relocations as
+ * documented in the ARM AArch32 ELF psABI (IHI 0044).
+ *
+ * A single PC-relative symbol reference is divided in up to 3 add or subtract
+ * operations, where the final one could be incorporated into a load/store
+ * instruction with immediate offset. E.g.,
+ *
+ *   ADD	Rd, PC, #...		or	ADD	Rd, PC, #...
+ *   ADD	Rd, Rd, #...			ADD	Rd, Rd, #...
+ *   LDR	Rd, [Rd, #...]			ADD	Rd, Rd, #...
+ *
+ * The latter has a guaranteed range of only 16 MiB (3x8 == 24 bits), so it is
+ * of limited use in the kernel. However, the ADD/ADD/LDR combo has a range of
+ * -/+ 256 MiB, (2x8 + 12 == 28 bits), which means it has sufficient range for
+ * any in-kernel symbol reference (unless module PLTs are being used).
+ *
+ * The main advantage of this approach over the typical pattern using a literal
+ * load is that literal loads may miss in the D-cache, and generally lead to
+ * lower cache efficiency for variables that are referenced often from many
+ * different places in the code.
+ */
+static u32 get_group_rem(u32 group, u32 *offset)
+{
+	u32 val = *offset;
+	u32 shift;
+	do {
+		shift = val ? (31 - __fls(val)) & ~1 : 32;
+		*offset = val;
+		if (!val)
+			break;
+		val &= 0xffffff >> shift;
+	} while (group--);
+	return shift;
+}
+#endif
+
 int
 apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 	       unsigned int relindex, struct module *module)
@@ -82,6 +120,9 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		unsigned long loc;
 		Elf32_Sym *sym;
 		const char *symname;
+#ifdef CONFIG_ARM_HAS_GROUP_RELOCS
+		u32 shift, group = 1;
+#endif
 		s32 offset;
 		u32 tmp;
 #ifdef CONFIG_THUMB2_KERNEL
@@ -212,6 +253,55 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			*(u32 *)loc = __opcode_to_mem_arm(tmp);
 			break;
 
+#ifdef CONFIG_ARM_HAS_GROUP_RELOCS
+		case R_ARM_ALU_PC_G0_NC:
+			group = 0;
+			fallthrough;
+		case R_ARM_ALU_PC_G1_NC:
+			tmp = __mem_to_opcode_arm(*(u32 *)loc);
+			offset = ror32(tmp & 0xff, (tmp & 0xf00) >> 7);
+			if (tmp & BIT(22))
+				offset = -offset;
+			offset += sym->st_value - loc;
+			if (offset < 0) {
+				offset = -offset;
+				tmp = (tmp & ~BIT(23)) | BIT(22); // SUB opcode
+			} else {
+				tmp = (tmp & ~BIT(22)) | BIT(23); // ADD opcode
+			}
+
+			shift = get_group_rem(group, &offset);
+			if (shift < 24) {
+				offset >>= 24 - shift;
+				offset |= (shift + 8) << 7;
+			}
+			*(u32 *)loc = __opcode_to_mem_arm((tmp & ~0xfff) | offset);
+			break;
+
+		case R_ARM_LDR_PC_G2:
+			tmp = __mem_to_opcode_arm(*(u32 *)loc);
+			offset = tmp & 0xfff;
+			if (~tmp & BIT(23))		// U bit cleared?
+				offset = -offset;
+			offset += sym->st_value - loc;
+			if (offset < 0) {
+				offset = -offset;
+				tmp &= ~BIT(23);	// clear U bit
+			} else {
+				tmp |= BIT(23);		// set U bit
+			}
+			get_group_rem(2, &offset);
+
+			if (offset > 0xfff) {
+				pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
+				       module->name, relindex, i, symname,
+				       ELF32_R_TYPE(rel->r_info), loc,
+				       sym->st_value);
+				return -ENOEXEC;
+			}
+			*(u32 *)loc = __opcode_to_mem_arm((tmp & ~0xfff) | offset);
+			break;
+#endif
 #ifdef CONFIG_THUMB2_KERNEL
 		case R_ARM_THM_CALL:
 		case R_ARM_THM_JUMP24:
@@ -369,46 +459,40 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
 #ifdef CONFIG_ARM_UNWIND
 	const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
 	const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum;
-	struct mod_unwind_map maps[ARM_SEC_MAX];
-	int i;
+	struct list_head *unwind_list = &mod->arch.unwind_list;
 
-	memset(maps, 0, sizeof(maps));
+	INIT_LIST_HEAD(unwind_list);
+	mod->arch.init_table = NULL;
 
 	for (s = sechdrs; s < sechdrs_end; s++) {
 		const char *secname = secstrs + s->sh_name;
+		const char *txtname;
+		const Elf_Shdr *txt_sec;
 
-		if (!(s->sh_flags & SHF_ALLOC))
+		if (!(s->sh_flags & SHF_ALLOC) ||
+		    s->sh_type != ELF_SECTION_UNWIND)
 			continue;
 
-		if (strcmp(".ARM.exidx.init.text", secname) == 0)
-			maps[ARM_SEC_INIT].unw_sec = s;
-		else if (strcmp(".ARM.exidx", secname) == 0)
-			maps[ARM_SEC_CORE].unw_sec = s;
-		else if (strcmp(".ARM.exidx.exit.text", secname) == 0)
-			maps[ARM_SEC_EXIT].unw_sec = s;
-		else if (strcmp(".ARM.exidx.text.unlikely", secname) == 0)
-			maps[ARM_SEC_UNLIKELY].unw_sec = s;
-		else if (strcmp(".ARM.exidx.text.hot", secname) == 0)
-			maps[ARM_SEC_HOT].unw_sec = s;
-		else if (strcmp(".init.text", secname) == 0)
-			maps[ARM_SEC_INIT].txt_sec = s;
-		else if (strcmp(".text", secname) == 0)
-			maps[ARM_SEC_CORE].txt_sec = s;
-		else if (strcmp(".exit.text", secname) == 0)
-			maps[ARM_SEC_EXIT].txt_sec = s;
-		else if (strcmp(".text.unlikely", secname) == 0)
-			maps[ARM_SEC_UNLIKELY].txt_sec = s;
-		else if (strcmp(".text.hot", secname) == 0)
-			maps[ARM_SEC_HOT].txt_sec = s;
-	}
+		if (!strcmp(".ARM.exidx", secname))
+			txtname = ".text";
+		else
+			txtname = secname + strlen(".ARM.exidx");
+		txt_sec = find_mod_section(hdr, sechdrs, txtname);
+
+		if (txt_sec) {
+			struct unwind_table *table =
+				unwind_table_add(s->sh_addr,
+						s->sh_size,
+						txt_sec->sh_addr,
+						txt_sec->sh_size);
+
+			list_add(&table->mod_list, unwind_list);
 
-	for (i = 0; i < ARM_SEC_MAX; i++)
-		if (maps[i].unw_sec && maps[i].txt_sec)
-			mod->arch.unwind[i] =
-				unwind_table_add(maps[i].unw_sec->sh_addr,
-					         maps[i].unw_sec->sh_size,
-					         maps[i].txt_sec->sh_addr,
-					         maps[i].txt_sec->sh_size);
+			/* save init table for module_arch_freeing_init */
+			if (strcmp(".ARM.exidx.init.text", secname) == 0)
+				mod->arch.init_table = table;
+		}
+	}
 #endif
 #ifdef CONFIG_ARM_PATCH_PHYS_VIRT
 	s = find_mod_section(hdr, sechdrs, ".pv_table");
@@ -429,19 +513,27 @@ void
 module_arch_cleanup(struct module *mod)
 {
 #ifdef CONFIG_ARM_UNWIND
-	int i;
+	struct unwind_table *tmp;
+	struct unwind_table *n;
 
-	for (i = 0; i < ARM_SEC_MAX; i++) {
-		unwind_table_del(mod->arch.unwind[i]);
-		mod->arch.unwind[i] = NULL;
+	list_for_each_entry_safe(tmp, n,
+			&mod->arch.unwind_list, mod_list) {
+		list_del(&tmp->mod_list);
+		unwind_table_del(tmp);
 	}
+	mod->arch.init_table = NULL;
 #endif
 }
 
 void __weak module_arch_freeing_init(struct module *mod)
 {
 #ifdef CONFIG_ARM_UNWIND
-	unwind_table_del(mod->arch.unwind[ARM_SEC_INIT]);
-	mod->arch.unwind[ARM_SEC_INIT] = NULL;
+	struct unwind_table *init = mod->arch.init_table;
+
+	if (init) {
+		mod->arch.init_table = NULL;
+		list_del(&init->mod_list);
+		unwind_table_del(init);
+	}
 #endif
 }
diff --git a/arch/arm/kernel/paravirt.c b/arch/arm/kernel/paravirt.c
index 4cfed91fe256..7dd9806369fb 100644
--- a/arch/arm/kernel/paravirt.c
+++ b/arch/arm/kernel/paravirt.c
@@ -9,10 +9,15 @@
 #include <linux/export.h>
 #include <linux/jump_label.h>
 #include <linux/types.h>
+#include <linux/static_call.h>
 #include <asm/paravirt.h>
 
 struct static_key paravirt_steal_enabled;
 struct static_key paravirt_steal_rq_enabled;
 
-struct paravirt_patch_template pv_ops;
-EXPORT_SYMBOL_GPL(pv_ops);
+static u64 native_steal_clock(int cpu)
+{
+	return 0;
+}
+
+DEFINE_STATIC_CALL(pv_steal_clock, native_steal_clock);
diff --git a/arch/arm/kernel/perf_callchain.c b/arch/arm/kernel/perf_callchain.c
index 3b69a76d341e..7147edbe56c6 100644
--- a/arch/arm/kernel/perf_callchain.c
+++ b/arch/arm/kernel/perf_callchain.c
@@ -64,11 +64,6 @@ perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs
 {
 	struct frame_tail __user *tail;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
-		/* We don't support guest os callchain now */
-		return;
-	}
-
 	perf_callchain_store(entry, regs->ARM_pc);
 
 	if (!current->mm)
@@ -86,13 +81,12 @@ perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs
  * whist unwinding the stackframe and is like a subroutine return so we use
  * the PC.
  */
-static int
-callchain_trace(struct stackframe *fr,
-		void *data)
+static bool
+callchain_trace(void *data, unsigned long pc)
 {
 	struct perf_callchain_entry_ctx *entry = data;
-	perf_callchain_store(entry, fr->pc);
-	return 0;
+	perf_callchain_store(entry, pc);
+	return true;
 }
 
 void
@@ -100,20 +94,12 @@ perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *re
 {
 	struct stackframe fr;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
-		/* We don't support guest os callchain now */
-		return;
-	}
-
 	arm_get_current_stackframe(regs, &fr);
 	walk_stackframe(&fr, callchain_trace, entry);
 }
 
 unsigned long perf_instruction_pointer(struct pt_regs *regs)
 {
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest())
-		return perf_guest_cbs->get_guest_ip();
-
 	return instruction_pointer(regs);
 }
 
@@ -121,17 +107,10 @@ unsigned long perf_misc_flags(struct pt_regs *regs)
 {
 	int misc = 0;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
-		if (perf_guest_cbs->is_user_mode())
-			misc |= PERF_RECORD_MISC_GUEST_USER;
-		else
-			misc |= PERF_RECORD_MISC_GUEST_KERNEL;
-	} else {
-		if (user_mode(regs))
-			misc |= PERF_RECORD_MISC_USER;
-		else
-			misc |= PERF_RECORD_MISC_KERNEL;
-	}
+	if (user_mode(regs))
+		misc |= PERF_RECORD_MISC_USER;
+	else
+		misc |= PERF_RECORD_MISC_KERNEL;
 
 	return misc;
 }
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 2924d7910b10..eb2190477da1 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -773,10 +773,10 @@ static inline void armv7pmu_write_counter(struct perf_event *event, u64 value)
 		pr_err("CPU%u writing wrong counter %d\n",
 			smp_processor_id(), idx);
 	} else if (idx == ARMV7_IDX_CYCLE_COUNTER) {
-		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
+		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" ((u32)value));
 	} else {
 		armv7_pmnc_select_counter(idx);
-		asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (value));
+		asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" ((u32)value));
 	}
 }
 
diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c
index 1d1fb22f44f3..4bca8098c4ff 100644
--- a/arch/arm/kernel/pj4-cp0.c
+++ b/arch/arm/kernel/pj4-cp0.c
@@ -126,6 +126,7 @@ static int __init pj4_cp0_init(void)
 	pr_info("PJ4 iWMMXt v%d coprocessor enabled.\n", vers);
 	elf_hwcap |= HWCAP_IWMMXT;
 	thread_register_notifier(&iwmmxt_notifier_block);
+	register_iwmmxt_undef_handler();
 #endif
 
 	return 0;
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 5199a2bb4111..e16ed102960c 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -5,8 +5,6 @@
  *  Copyright (C) 1996-2000 Russell King - Converted to ARM.
  *  Original Copyright (C) 1995  Linus Torvalds
  */
-#include <stdarg.h>
-
 #include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/sched/debug.h>
@@ -38,12 +36,21 @@
 
 #include "signal.h"
 
+#if defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
+DEFINE_PER_CPU(struct task_struct *, __entry_task);
+#endif
+
 #if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_STACKPROTECTOR_PER_TASK)
 #include <linux/stackprotector.h>
 unsigned long __stack_chk_guard __read_mostly;
 EXPORT_SYMBOL(__stack_chk_guard);
 #endif
 
+#ifndef CONFIG_CURRENT_POINTER_IN_TPIDRURO
+asmlinkage struct task_struct *__current;
+EXPORT_SYMBOL(__current);
+#endif
+
 static const char *processor_modes[] __maybe_unused = {
   "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
   "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26",
@@ -71,7 +78,6 @@ void arch_cpu_idle(void)
 		arm_pm_idle();
 	else
 		cpu_do_idle();
-	raw_local_irq_enable();
 }
 
 void arch_cpu_idle_prepare(void)
@@ -92,12 +98,23 @@ void arch_cpu_idle_exit(void)
 	ledtrig_cpu(CPU_LED_IDLE_END);
 }
 
+void __show_regs_alloc_free(struct pt_regs *regs)
+{
+	int i;
+
+	/* check for r0 - r12 only */
+	for (i = 0; i < 13; i++) {
+		pr_alert("Register r%d information:", i);
+		mem_dump_obj((void *)regs->uregs[i]);
+	}
+}
+
 void __show_regs(struct pt_regs *regs)
 {
 	unsigned long flags;
 	char buf[64];
 #ifndef CONFIG_CPU_V7M
-	unsigned int domain, fs;
+	unsigned int domain;
 #ifdef CONFIG_CPU_SW_DOMAIN_PAN
 	/*
 	 * Get the domain register for the parent context. In user
@@ -106,14 +123,11 @@ void __show_regs(struct pt_regs *regs)
 	 */
 	if (user_mode(regs)) {
 		domain = DACR_UACCESS_ENABLE;
-		fs = get_fs();
 	} else {
 		domain = to_svc_pt_regs(regs)->dacr;
-		fs = to_svc_pt_regs(regs)->addr_limit;
 	}
 #else
 	domain = get_domain();
-	fs = get_fs();
 #endif
 #endif
 
@@ -149,8 +163,6 @@ void __show_regs(struct pt_regs *regs)
 		if ((domain & domain_mask(DOMAIN_USER)) ==
 		    domain_val(DOMAIN_USER, DOMAIN_NOACCESS))
 			segment = "none";
-		else if (fs == KERNEL_DS)
-			segment = "kernel";
 		else
 			segment = "user";
 
@@ -188,7 +200,7 @@ void __show_regs(struct pt_regs *regs)
 void show_regs(struct pt_regs * regs)
 {
 	__show_regs(regs);
-	dump_stack();
+	dump_backtrace(regs, NULL, KERN_DEFAULT);
 }
 
 ATOMIC_NOTIFIER_HEAD(thread_notify_head);
@@ -210,7 +222,6 @@ void flush_thread(void)
 
 	flush_ptrace_hw_breakpoint(tsk);
 
-	memset(thread->used_cp, 0, sizeof(thread->used_cp));
 	memset(&tsk->thread.debug, 0, sizeof(struct debug_info));
 	memset(&thread->fpstate, 0, sizeof(union fp_state));
 
@@ -219,15 +230,13 @@ void flush_thread(void)
 	thread_notify(THREAD_NOTIFY_FLUSH, thread);
 }
 
-void release_thread(struct task_struct *dead_task)
-{
-}
-
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
-int copy_thread(unsigned long clone_flags, unsigned long stack_start,
-		unsigned long stk_sz, struct task_struct *p, unsigned long tls)
+int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
+	unsigned long clone_flags = args->flags;
+	unsigned long stack_start = args->stack;
+	unsigned long tls = args->tls;
 	struct thread_info *thread = task_thread_info(p);
 	struct pt_regs *childregs = task_pt_regs(p);
 
@@ -243,15 +252,15 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
 	thread->cpu_domain = get_domain();
 #endif
 
-	if (likely(!(p->flags & (PF_KTHREAD | PF_IO_WORKER)))) {
+	if (likely(!args->fn)) {
 		*childregs = *current_pt_regs();
 		childregs->ARM_r0 = 0;
 		if (stack_start)
 			childregs->ARM_sp = stack_start;
 	} else {
 		memset(childregs, 0, sizeof(struct pt_regs));
-		thread->cpu_context.r4 = stk_sz;
-		thread->cpu_context.r5 = stack_start;
+		thread->cpu_context.r4 = (unsigned long)args->fn_arg;
+		thread->cpu_context.r5 = (unsigned long)args->fn;
 		childregs->ARM_cpsr = SVC_MODE;
 	}
 	thread->cpu_context.pc = (unsigned long)ret_from_fork;
@@ -265,20 +274,14 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
 
 	thread_notify(THREAD_NOTIFY_COPY, thread);
 
-#ifdef CONFIG_STACKPROTECTOR_PER_TASK
-	thread->stack_canary = p->stack_canary;
-#endif
-
 	return 0;
 }
 
-unsigned long get_wchan(struct task_struct *p)
+unsigned long __get_wchan(struct task_struct *p)
 {
 	struct stackframe frame;
 	unsigned long stack_page;
 	int count = 0;
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
 
 	frame.fp = thread_saved_fp(p);
 	frame.sp = thread_saved_sp(p);
@@ -311,7 +314,7 @@ static int __init gate_vma_init(void)
 	gate_vma.vm_page_prot = PAGE_READONLY_EXEC;
 	gate_vma.vm_start = 0xffff0000;
 	gate_vma.vm_end	= 0xffff0000 + PAGE_SIZE;
-	gate_vma.vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC;
+	vm_flags_init(&gate_vma, VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYEXEC);
 	return 0;
 }
 arch_initcall(gate_vma_init);
@@ -366,7 +369,7 @@ static unsigned long sigpage_addr(const struct mm_struct *mm,
 
 	slots = ((last - first) >> PAGE_SHIFT) + 1;
 
-	offset = get_random_int() % slots;
+	offset = get_random_u32_below(slots);
 
 	addr = first + (offset << PAGE_SHIFT);
 
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 2771e682220b..2b945b9bd366 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -22,9 +22,9 @@
 #include <linux/hw_breakpoint.h>
 #include <linux/regset.h>
 #include <linux/audit.h>
-#include <linux/tracehook.h>
 #include <linux/unistd.h>
 
+#include <asm/syscall.h>
 #include <asm/traps.h>
 
 #define CREATE_TRACE_POINTS
@@ -318,32 +318,6 @@ static int ptrace_setwmmxregs(struct task_struct *tsk, void __user *ufp)
 
 #endif
 
-#ifdef CONFIG_CRUNCH
-/*
- * Get the child Crunch state.
- */
-static int ptrace_getcrunchregs(struct task_struct *tsk, void __user *ufp)
-{
-	struct thread_info *thread = task_thread_info(tsk);
-
-	crunch_task_disable(thread);  /* force it to ram */
-	return copy_to_user(ufp, &thread->crunchstate, CRUNCH_SIZE)
-		? -EFAULT : 0;
-}
-
-/*
- * Set the child Crunch state.
- */
-static int ptrace_setcrunchregs(struct task_struct *tsk, void __user *ufp)
-{
-	struct thread_info *thread = task_thread_info(tsk);
-
-	crunch_task_release(thread);  /* force a reload */
-	return copy_from_user(&thread->crunchstate, ufp, CRUNCH_SIZE)
-		? -EFAULT : 0;
-}
-#endif
-
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 /*
  * Convert a virtual register number into an index for a thread_info
@@ -610,8 +584,6 @@ static int fpa_set(struct task_struct *target,
 {
 	struct thread_info *thread = task_thread_info(target);
 
-	thread->used_cp[1] = thread->used_cp[2] = 1;
-
 	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 		&thread->fpstate,
 		0, sizeof(struct user_fp));
@@ -677,11 +649,9 @@ static int vfp_set(struct task_struct *target,
 	if (ret)
 		return ret;
 
-	ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
-				user_fpregs_offset + sizeof(new_vfp.fpregs),
-				user_fpscr_offset);
-	if (ret)
-		return ret;
+	user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+				  user_fpregs_offset + sizeof(new_vfp.fpregs),
+				  user_fpscr_offset);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 &new_vfp.fpscr,
@@ -811,20 +781,11 @@ long arch_ptrace(struct task_struct *child, long request,
 			break;
 
 		case PTRACE_SET_SYSCALL:
-			task_thread_info(child)->syscall = data;
+			task_thread_info(child)->abi_syscall = data &
+							__NR_SYSCALL_MASK;
 			ret = 0;
 			break;
 
-#ifdef CONFIG_CRUNCH
-		case PTRACE_GETCRUNCHREGS:
-			ret = ptrace_getcrunchregs(child, datap);
-			break;
-
-		case PTRACE_SETCRUNCHREGS:
-			ret = ptrace_setcrunchregs(child, datap);
-			break;
-#endif
-
 #ifdef CONFIG_VFP
 		case PTRACE_GETVFPREGS:
 			ret = copy_regset_to_user(child,
@@ -865,8 +826,7 @@ enum ptrace_syscall_dir {
 	PTRACE_SYSCALL_EXIT,
 };
 
-static void tracehook_report_syscall(struct pt_regs *regs,
-				    enum ptrace_syscall_dir dir)
+static void report_syscall(struct pt_regs *regs, enum ptrace_syscall_dir dir)
 {
 	unsigned long ip;
 
@@ -878,19 +838,19 @@ static void tracehook_report_syscall(struct pt_regs *regs,
 	regs->ARM_ip = dir;
 
 	if (dir == PTRACE_SYSCALL_EXIT)
-		tracehook_report_syscall_exit(regs, 0);
-	else if (tracehook_report_syscall_entry(regs))
-		current_thread_info()->syscall = -1;
+		ptrace_report_syscall_exit(regs, 0);
+	else if (ptrace_report_syscall_entry(regs))
+		current_thread_info()->abi_syscall = -1;
 
 	regs->ARM_ip = ip;
 }
 
-asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno)
+asmlinkage int syscall_trace_enter(struct pt_regs *regs)
 {
-	current_thread_info()->syscall = scno;
+	int scno;
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
+		report_syscall(regs, PTRACE_SYSCALL_ENTER);
 
 	/* Do seccomp after ptrace; syscall may have changed. */
 #ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER
@@ -898,11 +858,11 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno)
 		return -1;
 #else
 	/* XXX: remove this once OABI gets fixed */
-	secure_computing_strict(current_thread_info()->syscall);
+	secure_computing_strict(syscall_get_nr(current, regs));
 #endif
 
 	/* Tracer or seccomp may have changed syscall. */
-	scno = current_thread_info()->syscall;
+	scno = syscall_get_nr(current, regs);
 
 	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
 		trace_sys_enter(regs, scno);
@@ -931,5 +891,5 @@ asmlinkage void syscall_trace_exit(struct pt_regs *regs)
 		trace_sys_exit(regs, regs_return_value(regs));
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT);
+		report_syscall(regs, PTRACE_SYSCALL_EXIT);
 }
diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c
index 0ce388f15422..3f0d5c3dae11 100644
--- a/arch/arm/kernel/reboot.c
+++ b/arch/arm/kernel/reboot.c
@@ -10,6 +10,7 @@
 #include <asm/cacheflush.h>
 #include <asm/idmap.h>
 #include <asm/virt.h>
+#include <asm/system_misc.h>
 
 #include "reboot.h"
 
@@ -18,7 +19,6 @@ typedef void (*phys_reset_t)(unsigned long, bool);
 /*
  * Function pointers to optional machine specific functions
  */
-void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd);
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
@@ -117,9 +117,7 @@ void machine_power_off(void)
 {
 	local_irq_disable();
 	smp_send_stop();
-
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 }
 
 /*
@@ -138,10 +136,7 @@ void machine_restart(char *cmd)
 	local_irq_disable();
 	smp_send_stop();
 
-	if (arm_pm_restart)
-		arm_pm_restart(reboot_mode, cmd);
-	else
-		do_kernel_restart(cmd);
+	do_kernel_restart(cmd);
 
 	/* Give a grace period for failure to restart of 1s */
 	mdelay(1000);
diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
index 7b42ac010fdf..ac15db66df4c 100644
--- a/arch/arm/kernel/return_address.c
+++ b/arch/arm/kernel/return_address.c
@@ -16,17 +16,17 @@ struct return_address_data {
 	void *addr;
 };
 
-static int save_return_addr(struct stackframe *frame, void *d)
+static bool save_return_addr(void *d, unsigned long pc)
 {
 	struct return_address_data *data = d;
 
 	if (!data->level) {
-		data->addr = (void *)frame->pc;
+		data->addr = (void *)pc;
 
-		return 1;
+		return false;
 	} else {
 		--data->level;
-		return 0;
+		return true;
 	}
 }
 
@@ -41,7 +41,13 @@ void *return_address(unsigned int level)
 	frame.fp = (unsigned long)__builtin_frame_address(0);
 	frame.sp = current_stack_pointer;
 	frame.lr = (unsigned long)__builtin_return_address(0);
-	frame.pc = (unsigned long)return_address;
+here:
+	frame.pc = (unsigned long)&&here;
+#ifdef CONFIG_KRETPROBES
+	frame.kr_cur = NULL;
+	frame.tsk = current;
+#endif
+	frame.ex_frame = false;
 
 	walk_stackframe(&frame, save_return_addr, &data);
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 1a5edf562e85..75cd4699e7b3 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -141,10 +141,10 @@ EXPORT_SYMBOL(outer_cache);
 int __cpu_architecture __read_mostly = CPU_ARCH_UNKNOWN;
 
 struct stack {
-	u32 irq[3];
-	u32 abt[3];
-	u32 und[3];
-	u32 fiq[3];
+	u32 irq[4];
+	u32 abt[4];
+	u32 und[4];
+	u32 fiq[4];
 } ____cacheline_aligned;
 
 #ifndef CONFIG_CPU_V7M
@@ -450,6 +450,8 @@ static void __init cpuid_init_hwcaps(void)
 {
 	int block;
 	u32 isar5;
+	u32 isar6;
+	u32 pfr2;
 
 	if (cpu_architecture() < CPU_ARCH_ARMv7)
 		return;
@@ -485,6 +487,18 @@ static void __init cpuid_init_hwcaps(void)
 	block = cpuid_feature_extract_field(isar5, 16);
 	if (block >= 1)
 		elf_hwcap2 |= HWCAP2_CRC32;
+
+	/* Check for Speculation barrier instruction */
+	isar6 = read_cpuid_ext(CPUID_EXT_ISAR6);
+	block = cpuid_feature_extract_field(isar6, 12);
+	if (block >= 1)
+		elf_hwcap2 |= HWCAP2_SB;
+
+	/* Check for Speculative Store Bypassing control */
+	pfr2 = read_cpuid_ext(CPUID_EXT_PFR2);
+	block = cpuid_feature_extract_field(pfr2, 4);
+	if (block >= 1)
+		elf_hwcap2 |= HWCAP2_SSBS;
 }
 
 static void __init elf_hwcap_fixup(void)
@@ -545,9 +559,11 @@ void notrace cpu_init(void)
 	 * In Thumb-2, msr with an immediate value is not allowed.
 	 */
 #ifdef CONFIG_THUMB2_KERNEL
-#define PLC	"r"
+#define PLC_l	"l"
+#define PLC_r	"r"
 #else
-#define PLC	"I"
+#define PLC_l	"I"
+#define PLC_r	"I"
 #endif
 
 	/*
@@ -569,15 +585,15 @@ void notrace cpu_init(void)
 	"msr	cpsr_c, %9"
 	    :
 	    : "r" (stk),
-	      PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
+	      PLC_r (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
 	      "I" (offsetof(struct stack, irq[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
+	      PLC_r (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
 	      "I" (offsetof(struct stack, abt[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE),
+	      PLC_r (PSR_F_BIT | PSR_I_BIT | UND_MODE),
 	      "I" (offsetof(struct stack, und[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | FIQ_MODE),
+	      PLC_r (PSR_F_BIT | PSR_I_BIT | FIQ_MODE),
 	      "I" (offsetof(struct stack, fiq[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
+	      PLC_l (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
 	    : "r14");
 #endif
 }
@@ -1002,7 +1018,8 @@ static void __init reserve_crashkernel(void)
 	total_mem = get_total_mem();
 	ret = parse_crashkernel(boot_command_line, total_mem,
 				&crash_size, &crash_base);
-	if (ret)
+	/* invalid value specified or crashkernel=0 */
+	if (ret || !crash_size)
 		return;
 
 	if (crash_base <= 0) {
@@ -1010,31 +1027,25 @@ static void __init reserve_crashkernel(void)
 		unsigned long long lowmem_max = __pa(high_memory - 1) + 1;
 		if (crash_max > lowmem_max)
 			crash_max = lowmem_max;
-		crash_base = memblock_find_in_range(CRASH_ALIGN, crash_max,
-						    crash_size, CRASH_ALIGN);
+
+		crash_base = memblock_phys_alloc_range(crash_size, CRASH_ALIGN,
+						       CRASH_ALIGN, crash_max);
 		if (!crash_base) {
 			pr_err("crashkernel reservation failed - No suitable area found.\n");
 			return;
 		}
 	} else {
+		unsigned long long crash_max = crash_base + crash_size;
 		unsigned long long start;
 
-		start = memblock_find_in_range(crash_base,
-					       crash_base + crash_size,
-					       crash_size, SECTION_SIZE);
-		if (start != crash_base) {
+		start = memblock_phys_alloc_range(crash_size, SECTION_SIZE,
+						  crash_base, crash_max);
+		if (!start) {
 			pr_err("crashkernel reservation failed - memory is in use.\n");
 			return;
 		}
 	}
 
-	ret = memblock_reserve(crash_base, crash_size);
-	if (ret < 0) {
-		pr_warn("crashkernel reservation failed - memory is in use (0x%lx)\n",
-			(unsigned long)crash_base);
-		return;
-	}
-
 	pr_info("Reserving %ldMB of memory at %ldMB for crashkernel (System RAM: %ldMB)\n",
 		(unsigned long)(crash_size >> 20),
 		(unsigned long)(crash_base >> 20),
@@ -1081,6 +1092,20 @@ void __init hyp_mode_check(void)
 #endif
 }
 
+static void (*__arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd);
+
+static int arm_restart(struct notifier_block *nb, unsigned long action,
+		       void *data)
+{
+	__arm_pm_restart(action, data);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block arm_restart_nb = {
+	.notifier_call = arm_restart,
+	.priority = 128,
+};
+
 void __init setup_arch(char **cmdline_p)
 {
 	const struct machine_desc *mdesc = NULL;
@@ -1114,10 +1139,7 @@ void __init setup_arch(char **cmdline_p)
 	if (mdesc->reboot_mode != REBOOT_HARD)
 		reboot_mode = mdesc->reboot_mode;
 
-	init_mm.start_code = (unsigned long) _text;
-	init_mm.end_code   = (unsigned long) _etext;
-	init_mm.end_data   = (unsigned long) _edata;
-	init_mm.brk	   = (unsigned long) _end;
+	setup_initial_init_mm(_text, _etext, _edata, _end);
 
 	/* populate cmd_line too for later use, preserving boot_command_line */
 	strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
@@ -1133,7 +1155,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	setup_dma_zone(mdesc);
 	xen_early_init();
-	efi_init();
+	arm_efi_init();
 	/*
 	 * Make sure the calculation for lowmem/highmem is set appropriately
 	 * before reserving/allocating any memory
@@ -1149,8 +1171,10 @@ void __init setup_arch(char **cmdline_p)
 	kasan_init();
 	request_standard_resources(mdesc);
 
-	if (mdesc->restart)
-		arm_pm_restart = mdesc->restart;
+	if (mdesc->restart) {
+		__arm_pm_restart = mdesc->restart;
+		register_restart_handler(&arm_restart_nb);
+	}
 
 	unflatten_device_tree();
 
@@ -1239,6 +1263,12 @@ static const char *hwcap_str[] = {
 	"vfpd32",
 	"lpae",
 	"evtstrm",
+	"fphp",
+	"asimdhp",
+	"asimddp",
+	"asimdfhm",
+	"asimdbf16",
+	"i8mm",
 	NULL
 };
 
@@ -1248,6 +1278,8 @@ static const char *hwcap2_str[] = {
 	"sha1",
 	"sha2",
 	"crc32",
+	"sb",
+	"ssbs",
 	NULL
 };
 
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index a3a38d0a4c85..e07f359254c3 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -9,7 +9,7 @@
 #include <linux/signal.h>
 #include <linux/personality.h>
 #include <linux/uaccess.h>
-#include <linux/tracehook.h>
+#include <linux/resume_user_mode.h>
 #include <linux/uprobes.h>
 #include <linux/syscalls.h>
 
@@ -25,40 +25,6 @@ extern const unsigned long sigreturn_codes[17];
 
 static unsigned long signal_return_offset;
 
-#ifdef CONFIG_CRUNCH
-static int preserve_crunch_context(struct crunch_sigframe __user *frame)
-{
-	char kbuf[sizeof(*frame) + 8];
-	struct crunch_sigframe *kframe;
-
-	/* the crunch context must be 64 bit aligned */
-	kframe = (struct crunch_sigframe *)((unsigned long)(kbuf + 8) & ~7);
-	kframe->magic = CRUNCH_MAGIC;
-	kframe->size = CRUNCH_STORAGE_SIZE;
-	crunch_task_copy(current_thread_info(), &kframe->storage);
-	return __copy_to_user(frame, kframe, sizeof(*frame));
-}
-
-static int restore_crunch_context(char __user **auxp)
-{
-	struct crunch_sigframe __user *frame =
-		(struct crunch_sigframe __user *)*auxp;
-	char kbuf[sizeof(*frame) + 8];
-	struct crunch_sigframe *kframe;
-
-	/* the crunch context must be 64 bit aligned */
-	kframe = (struct crunch_sigframe *)((unsigned long)(kbuf + 8) & ~7);
-	if (__copy_from_user(kframe, frame, sizeof(*frame)))
-		return -1;
-	if (kframe->magic != CRUNCH_MAGIC ||
-	    kframe->size != CRUNCH_STORAGE_SIZE)
-		return -1;
-	*auxp += CRUNCH_STORAGE_SIZE;
-	crunch_task_restore(current_thread_info(), &kframe->storage);
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_IWMMXT
 
 static int preserve_iwmmxt_context(struct iwmmxt_sigframe __user *frame)
@@ -205,10 +171,6 @@ static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
 	err |= !valid_user_regs(regs);
 
 	aux = (char __user *) sf->uc.uc_regspace;
-#ifdef CONFIG_CRUNCH
-	if (err == 0)
-		err |= restore_crunch_context(&aux);
-#endif
 #ifdef CONFIG_IWMMXT
 	if (err == 0)
 		err |= restore_iwmmxt_context(&aux);
@@ -321,10 +283,6 @@ setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs, sigset_t *set)
 	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set));
 
 	aux = (struct aux_sigframe __user *) sf->uc.uc_regspace;
-#ifdef CONFIG_CRUNCH
-	if (err == 0)
-		err |= preserve_crunch_context(&aux->crunch);
-#endif
 #ifdef CONFIG_IWMMXT
 	if (err == 0)
 		err |= preserve_iwmmxt_context(&aux->iwmmxt);
@@ -669,12 +627,11 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 			} else if (thread_flags & _TIF_UPROBE) {
 				uprobe_notify_resume(regs);
 			} else {
-				tracehook_notify_resume(regs);
-				rseq_handle_notify_resume(NULL, regs);
+				resume_user_mode_work(regs);
 			}
 		}
 		local_irq_disable();
-		thread_flags = current_thread_info()->flags;
+		thread_flags = read_thread_flags();
 	} while (thread_flags & _TIF_WORK_MASK);
 	return 0;
 }
@@ -698,7 +655,7 @@ struct page *get_signal_page(void)
 		 PAGE_SIZE / sizeof(u32));
 
 	/* Give the signal return code some randomness */
-	offset = 0x200 + (get_random_int() & 0x7fc);
+	offset = 0x200 + (get_random_u16() & 0x7fc);
 	signal_return_offset = offset;
 
 	/* Copy signal return handlers into the page */
@@ -711,17 +668,49 @@ struct page *get_signal_page(void)
 	return page;
 }
 
-/* Defer to generic check */
-asmlinkage void addr_limit_check_failed(void)
-{
-#ifdef CONFIG_MMU
-	addr_limit_user_check();
-#endif
-}
-
 #ifdef CONFIG_DEBUG_RSEQ
 asmlinkage void do_rseq_syscall(struct pt_regs *regs)
 {
 	rseq_syscall(regs);
 }
 #endif
+
+/*
+ * Compile-time assertions for siginfo_t offsets. Check NSIG* as well, as
+ * changes likely come with new fields that should be added below.
+ */
+static_assert(NSIGILL	== 11);
+static_assert(NSIGFPE	== 15);
+static_assert(NSIGSEGV	== 9);
+static_assert(NSIGBUS	== 5);
+static_assert(NSIGTRAP	== 6);
+static_assert(NSIGCHLD	== 6);
+static_assert(NSIGSYS	== 2);
+static_assert(sizeof(siginfo_t) == 128);
+static_assert(__alignof__(siginfo_t) == 4);
+static_assert(offsetof(siginfo_t, si_signo)	== 0x00);
+static_assert(offsetof(siginfo_t, si_errno)	== 0x04);
+static_assert(offsetof(siginfo_t, si_code)	== 0x08);
+static_assert(offsetof(siginfo_t, si_pid)	== 0x0c);
+static_assert(offsetof(siginfo_t, si_uid)	== 0x10);
+static_assert(offsetof(siginfo_t, si_tid)	== 0x0c);
+static_assert(offsetof(siginfo_t, si_overrun)	== 0x10);
+static_assert(offsetof(siginfo_t, si_status)	== 0x14);
+static_assert(offsetof(siginfo_t, si_utime)	== 0x18);
+static_assert(offsetof(siginfo_t, si_stime)	== 0x1c);
+static_assert(offsetof(siginfo_t, si_value)	== 0x14);
+static_assert(offsetof(siginfo_t, si_int)	== 0x14);
+static_assert(offsetof(siginfo_t, si_ptr)	== 0x14);
+static_assert(offsetof(siginfo_t, si_addr)	== 0x0c);
+static_assert(offsetof(siginfo_t, si_addr_lsb)	== 0x10);
+static_assert(offsetof(siginfo_t, si_lower)	== 0x14);
+static_assert(offsetof(siginfo_t, si_upper)	== 0x18);
+static_assert(offsetof(siginfo_t, si_pkey)	== 0x14);
+static_assert(offsetof(siginfo_t, si_perf_data)	== 0x10);
+static_assert(offsetof(siginfo_t, si_perf_type)	== 0x14);
+static_assert(offsetof(siginfo_t, si_perf_flags) == 0x18);
+static_assert(offsetof(siginfo_t, si_band)	== 0x0c);
+static_assert(offsetof(siginfo_t, si_fd)	== 0x10);
+static_assert(offsetof(siginfo_t, si_call_addr)	== 0x0c);
+static_assert(offsetof(siginfo_t, si_syscall)	== 0x10);
+static_assert(offsetof(siginfo_t, si_arch)	== 0x14);
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index 43077e11dafd..a86a1d4f3461 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -67,6 +67,12 @@ ENTRY(__cpu_suspend)
 	ldr	r4, =cpu_suspend_size
 #endif
 	mov	r5, sp			@ current virtual SP
+#ifdef CONFIG_VMAP_STACK
+	@ Run the suspend code from the overflow stack so we don't have to rely
+	@ on vmalloc-to-phys conversions anywhere in the arch suspend code.
+	@ The original SP value captured in R5 will be restored on the way out.
+	ldr_this_cpu sp, overflow_stack_ptr, r6, r7
+#endif
 	add	r4, r4, #12		@ Space for pgd, virt sp, phys resume fn
 	sub	sp, sp, r4		@ allocate CPU state on stack
 	ldr	r3, =sleep_save_sp
@@ -113,6 +119,13 @@ ENTRY(cpu_resume_mmu)
 ENDPROC(cpu_resume_mmu)
 	.popsection
 cpu_resume_after_mmu:
+#if defined(CONFIG_VMAP_STACK) && !defined(CONFIG_ARM_LPAE)
+	@ Before using the vmap'ed stack, we have to switch to swapper_pg_dir
+	@ as the ID map does not cover the vmalloc region.
+	mrc	p15, 0, ip, c2, c0, 1	@ read TTBR1
+	mcr	p15, 0, ip, c2, c0, 0	@ set TTBR0
+	instr_sync
+#endif
 	bl	cpu_init		@ restore the und/abt/irq banked regs
 	mov	r0, #0			@ return zero on success
 	ldmfd	sp!, {r4 - r11, pc}
diff --git a/arch/arm/kernel/smccc-call.S b/arch/arm/kernel/smccc-call.S
index 00664c78faca..931df62a7831 100644
--- a/arch/arm/kernel/smccc-call.S
+++ b/arch/arm/kernel/smccc-call.S
@@ -3,7 +3,9 @@
  * Copyright (c) 2015, Linaro Limited
  */
 #include <linux/linkage.h>
+#include <linux/arm-smccc.h>
 
+#include <asm/asm-offsets.h>
 #include <asm/opcodes-sec.h>
 #include <asm/opcodes-virt.h>
 #include <asm/unwind.h>
@@ -27,7 +29,14 @@ UNWIND(	.fnstart)
 UNWIND(	.save	{r4-r7})
 	ldm	r12, {r4-r7}
 	\instr
-	pop	{r4-r7}
+	ldr	r4, [sp, #36]
+	cmp	r4, #0
+	beq	1f			// No quirk structure
+	ldr     r5, [r4, #ARM_SMCCC_QUIRK_ID_OFFS]
+	cmp     r5, #ARM_SMCCC_QUIRK_QCOM_A6
+	bne	1f			// No quirk present
+	str	r6, [r4, #ARM_SMCCC_QUIRK_STATE_OFFS]
+1:	pop	{r4-r7}
 	ldr	r12, [sp, #(4 * 4)]
 	stm	r12, {r0-r3}
 	bx	lr
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 74679240a9d8..87f8d0e5e314 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -48,7 +48,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mpu.h>
 
-#define CREATE_TRACE_POINTS
 #include <trace/events/ipi.h>
 
 /*
@@ -153,6 +152,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	secondary_data.pgdir = virt_to_phys(idmap_pgd);
 	secondary_data.swapper_pg_dir = get_arch_pgd(swapper_pg_dir);
 #endif
+	secondary_data.task = idle;
 	sync_cache_w(&secondary_data);
 
 	/*
@@ -319,7 +319,7 @@ void __cpu_die(unsigned int cpu)
  * of the other hotplug-cpu capable cores, so presumably coming
  * out of idle fixes this.
  */
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	unsigned int cpu = smp_processor_id();
 
@@ -375,9 +375,14 @@ void arch_cpu_idle_dead(void)
 	 */
 	__asm__("mov	sp, %0\n"
 	"	mov	fp, #0\n"
+	"	mov	r0, %1\n"
 	"	b	secondary_start_kernel"
 		:
-		: "r" (task_stack_page(current) + THREAD_SIZE - 8));
+		: "r" (task_stack_page(current) + THREAD_SIZE - 8),
+		  "r" (current)
+		: "r0");
+
+	unreachable();
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
@@ -396,15 +401,23 @@ static void smp_store_cpu_info(unsigned int cpuid)
 	check_cpu_icache_size(cpuid);
 }
 
+static void set_current(struct task_struct *cur)
+{
+	/* Set TPIDRURO */
+	asm("mcr p15, 0, %0, c13, c0, 3" :: "r"(cur) : "memory");
+}
+
 /*
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
  */
-asmlinkage void secondary_start_kernel(void)
+asmlinkage void secondary_start_kernel(struct task_struct *task)
 {
 	struct mm_struct *mm = &init_mm;
 	unsigned int cpu;
 
+	set_current(task);
+
 	secondary_biglittle_init();
 
 	/*
@@ -432,7 +445,6 @@ asmlinkage void secondary_start_kernel(void)
 #endif
 	pr_debug("CPU%u: Booted secondary processor\n", cpu);
 
-	preempt_disable();
 	trace_hardirqs_off();
 
 	/*
@@ -589,6 +601,8 @@ static DEFINE_RAW_SPINLOCK(stop_lock);
  */
 static void ipi_cpu_stop(unsigned int cpu)
 {
+	local_fiq_disable();
+
 	if (system_state <= SYSTEM_RUNNING) {
 		raw_spin_lock(&stop_lock);
 		pr_crit("CPU%u: stopping\n", cpu);
@@ -598,9 +612,6 @@ static void ipi_cpu_stop(unsigned int cpu)
 
 	set_cpu_online(cpu, false);
 
-	local_fiq_disable();
-	local_irq_disable();
-
 	while (1) {
 		cpu_relax();
 		wfe();
@@ -623,17 +634,12 @@ static void ipi_complete(unsigned int cpu)
 /*
  * Main handler for inter-processor interrupts
  */
-asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs)
-{
-	handle_IPI(ipinr, regs);
-}
-
 static void do_handle_IPI(int ipinr)
 {
 	unsigned int cpu = smp_processor_id();
 
 	if ((unsigned)ipinr < NR_IPI)
-		trace_ipi_entry_rcuidle(ipi_types[ipinr]);
+		trace_ipi_entry(ipi_types[ipinr]);
 
 	switch (ipinr) {
 	case IPI_WAKEUP:
@@ -668,9 +674,9 @@ static void do_handle_IPI(int ipinr)
 		break;
 
 	case IPI_CPU_BACKTRACE:
-		printk_nmi_enter();
+		printk_deferred_enter();
 		nmi_cpu_backtrace(get_irq_regs());
-		printk_nmi_exit();
+		printk_deferred_exit();
 		break;
 
 	default:
@@ -680,7 +686,7 @@ static void do_handle_IPI(int ipinr)
 	}
 
 	if ((unsigned)ipinr < NR_IPI)
-		trace_ipi_exit_rcuidle(ipi_types[ipinr]);
+		trace_ipi_exit(ipi_types[ipinr]);
 }
 
 /* Legacy version, should go away once all irqchips have been converted */
@@ -703,7 +709,7 @@ static irqreturn_t ipi_handler(int irq, void *data)
 
 static void smp_cross_call(const struct cpumask *target, unsigned int ipinr)
 {
-	trace_ipi_raise_rcuidle(target, ipi_types[ipinr]);
+	trace_ipi_raise(target, ipi_types[ipinr]);
 	__ipi_send_mask(ipi_desc[ipinr], target);
 }
 
@@ -742,7 +748,7 @@ void __init set_smp_ipi_range(int ipi_base, int n)
 	ipi_setup(smp_processor_id());
 }
 
-void smp_send_reschedule(int cpu)
+void arch_smp_send_reschedule(int cpu)
 {
 	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
 }
@@ -772,7 +778,7 @@ void smp_send_stop(void)
  * kdump fails. So split out the panic_smp_self_stop() and add
  * set_cpu_online(smp_processor_id(), false).
  */
-void panic_smp_self_stop(void)
+void __noreturn panic_smp_self_stop(void)
 {
 	pr_debug("CPU %u will stop doing anything useful since another CPU has paniced\n",
 	         smp_processor_id());
@@ -781,14 +787,6 @@ void panic_smp_self_stop(void)
 		cpu_relax();
 }
 
-/*
- * not supported here
- */
-int setup_profiling_timer(unsigned int multiplier)
-{
-	return -EINVAL;
-}
-
 #ifdef CONFIG_CPU_FREQ
 
 static DEFINE_PER_CPU(unsigned long, l_p_j_ref);
diff --git a/arch/arm/kernel/spectre.c b/arch/arm/kernel/spectre.c
new file mode 100644
index 000000000000..0dcefc36fb7a
--- /dev/null
+++ b/arch/arm/kernel/spectre.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/bpf.h>
+#include <linux/cpu.h>
+#include <linux/device.h>
+
+#include <asm/spectre.h>
+
+static bool _unprivileged_ebpf_enabled(void)
+{
+#ifdef CONFIG_BPF_SYSCALL
+	return !sysctl_unprivileged_bpf_disabled;
+#else
+	return false;
+#endif
+}
+
+ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	return sprintf(buf, "Mitigation: __user pointer sanitization\n");
+}
+
+static unsigned int spectre_v2_state;
+static unsigned int spectre_v2_methods;
+
+void spectre_v2_update_state(unsigned int state, unsigned int method)
+{
+	if (state > spectre_v2_state)
+		spectre_v2_state = state;
+	spectre_v2_methods |= method;
+}
+
+ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	const char *method;
+
+	if (spectre_v2_state == SPECTRE_UNAFFECTED)
+		return sprintf(buf, "%s\n", "Not affected");
+
+	if (spectre_v2_state != SPECTRE_MITIGATED)
+		return sprintf(buf, "%s\n", "Vulnerable");
+
+	if (_unprivileged_ebpf_enabled())
+		return sprintf(buf, "Vulnerable: Unprivileged eBPF enabled\n");
+
+	switch (spectre_v2_methods) {
+	case SPECTRE_V2_METHOD_BPIALL:
+		method = "Branch predictor hardening";
+		break;
+
+	case SPECTRE_V2_METHOD_ICIALLU:
+		method = "I-cache invalidation";
+		break;
+
+	case SPECTRE_V2_METHOD_SMC:
+	case SPECTRE_V2_METHOD_HVC:
+		method = "Firmware call";
+		break;
+
+	case SPECTRE_V2_METHOD_LOOP8:
+		method = "History overwrite";
+		break;
+
+	default:
+		method = "Multiple mitigations";
+		break;
+	}
+
+	return sprintf(buf, "Mitigation: %s\n", method);
+}
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 76ea4178a55c..620aa82e3bdd 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 #include <linux/export.h>
+#include <linux/kprobes.h>
 #include <linux/sched.h>
 #include <linux/sched/debug.h>
 #include <linux/stacktrace.h>
@@ -8,6 +9,8 @@
 #include <asm/stacktrace.h>
 #include <asm/traps.h>
 
+#include "reboot.h"
+
 #if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
 /*
  * Unwind the current stack frame and store the new register values in the
@@ -38,46 +41,98 @@
  * Note that with framepointer enabled, even the leaf functions have the same
  * prologue and epilogue, therefore we can ignore the LR value in this case.
  */
-int notrace unwind_frame(struct stackframe *frame)
+
+extern unsigned long call_with_stack_end;
+
+static int frame_pointer_check(struct stackframe *frame)
 {
 	unsigned long high, low;
 	unsigned long fp = frame->fp;
+	unsigned long pc = frame->pc;
+
+	/*
+	 * call_with_stack() is the only place we allow SP to jump from one
+	 * stack to another, with FP and SP pointing to different stacks,
+	 * skipping the FP boundary check at this point.
+	 */
+	if (pc >= (unsigned long)&call_with_stack &&
+			pc < (unsigned long)&call_with_stack_end)
+		return 0;
 
 	/* only go to a higher address on the stack */
 	low = frame->sp;
 	high = ALIGN(low, THREAD_SIZE);
 
-#ifdef CONFIG_CC_IS_CLANG
 	/* check current frame pointer is within bounds */
+#ifdef CONFIG_CC_IS_CLANG
 	if (fp < low + 4 || fp > high - 4)
 		return -EINVAL;
-
-	frame->sp = frame->fp;
-	frame->fp = *(unsigned long *)(fp);
-	frame->pc = frame->lr;
-	frame->lr = *(unsigned long *)(fp + 4);
 #else
-	/* check current frame pointer is within bounds */
 	if (fp < low + 12 || fp > high - 4)
 		return -EINVAL;
+#endif
+
+	return 0;
+}
+
+int notrace unwind_frame(struct stackframe *frame)
+{
+	unsigned long fp = frame->fp;
+
+	if (frame_pointer_check(frame))
+		return -EINVAL;
+
+	/*
+	 * When we unwind through an exception stack, include the saved PC
+	 * value into the stack trace.
+	 */
+	if (frame->ex_frame) {
+		struct pt_regs *regs = (struct pt_regs *)frame->sp;
+
+		/*
+		 * We check that 'regs + sizeof(struct pt_regs)' (that is,
+		 * &regs[1]) does not exceed the bottom of the stack to avoid
+		 * accessing data outside the task's stack. This may happen
+		 * when frame->ex_frame is a false positive.
+		 */
+		if ((unsigned long)&regs[1] > ALIGN(frame->sp, THREAD_SIZE))
+			return -EINVAL;
+
+		frame->pc = regs->ARM_pc;
+		frame->ex_frame = false;
+		return 0;
+	}
 
 	/* restore the registers from the stack frame */
-	frame->fp = *(unsigned long *)(fp - 12);
-	frame->sp = *(unsigned long *)(fp - 8);
-	frame->pc = *(unsigned long *)(fp - 4);
+#ifdef CONFIG_CC_IS_CLANG
+	frame->sp = frame->fp;
+	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp));
+	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 4));
+#else
+	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 12));
+	frame->sp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 8));
+	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 4));
+#endif
+#ifdef CONFIG_KRETPROBES
+	if (is_kretprobe_trampoline(frame->pc))
+		frame->pc = kretprobe_find_ret_addr(frame->tsk,
+					(void *)frame->fp, &frame->kr_cur);
 #endif
 
+	if (in_entry_text(frame->pc))
+		frame->ex_frame = true;
+
 	return 0;
 }
 #endif
 
 void notrace walk_stackframe(struct stackframe *frame,
-		     int (*fn)(struct stackframe *, void *), void *data)
+		     bool (*fn)(void *, unsigned long), void *data)
 {
 	while (1) {
 		int ret;
 
-		if (fn(frame, data))
+		if (!fn(data, frame->pc))
 			break;
 		ret = unwind_frame(frame);
 		if (ret < 0)
@@ -87,55 +142,32 @@ void notrace walk_stackframe(struct stackframe *frame,
 EXPORT_SYMBOL(walk_stackframe);
 
 #ifdef CONFIG_STACKTRACE
-struct stack_trace_data {
-	struct stack_trace *trace;
-	unsigned int no_sched_functions;
-	unsigned int skip;
-};
-
-static int save_trace(struct stackframe *frame, void *d)
+static void start_stack_trace(struct stackframe *frame, struct task_struct *task,
+			      unsigned long fp, unsigned long sp,
+			      unsigned long lr, unsigned long pc)
 {
-	struct stack_trace_data *data = d;
-	struct stack_trace *trace = data->trace;
-	struct pt_regs *regs;
-	unsigned long addr = frame->pc;
-
-	if (data->no_sched_functions && in_sched_functions(addr))
-		return 0;
-	if (data->skip) {
-		data->skip--;
-		return 0;
-	}
-
-	trace->entries[trace->nr_entries++] = addr;
-
-	if (trace->nr_entries >= trace->max_entries)
-		return 1;
-
-	if (!in_entry_text(frame->pc))
-		return 0;
-
-	regs = (struct pt_regs *)frame->sp;
-	if ((unsigned long)&regs[1] > ALIGN(frame->sp, THREAD_SIZE))
-		return 0;
-
-	trace->entries[trace->nr_entries++] = regs->ARM_pc;
-
-	return trace->nr_entries >= trace->max_entries;
+	frame->fp = fp;
+	frame->sp = sp;
+	frame->lr = lr;
+	frame->pc = pc;
+#ifdef CONFIG_KRETPROBES
+	frame->kr_cur = NULL;
+	frame->tsk = task;
+#endif
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+	frame->ex_frame = in_entry_text(frame->pc);
+#endif
 }
 
-/* This must be noinline to so that our skip calculation works correctly */
-static noinline void __save_stack_trace(struct task_struct *tsk,
-	struct stack_trace *trace, unsigned int nosched)
+void arch_stack_walk(stack_trace_consume_fn consume_entry, void *cookie,
+		     struct task_struct *task, struct pt_regs *regs)
 {
-	struct stack_trace_data data;
 	struct stackframe frame;
 
-	data.trace = trace;
-	data.skip = trace->skip;
-	data.no_sched_functions = nosched;
-
-	if (tsk != current) {
+	if (regs) {
+		start_stack_trace(&frame, NULL, regs->ARM_fp, regs->ARM_sp,
+				  regs->ARM_lr, regs->ARM_pc);
+	} else if (task != current) {
 #ifdef CONFIG_SMP
 		/*
 		 * What guarantees do we have here that 'tsk' is not
@@ -144,49 +176,22 @@ static noinline void __save_stack_trace(struct task_struct *tsk,
 		 */
 		return;
 #else
-		frame.fp = thread_saved_fp(tsk);
-		frame.sp = thread_saved_sp(tsk);
-		frame.lr = 0;		/* recovered from the stack */
-		frame.pc = thread_saved_pc(tsk);
+		start_stack_trace(&frame, task, thread_saved_fp(task),
+				  thread_saved_sp(task), 0,
+				  thread_saved_pc(task));
 #endif
 	} else {
-		/* We don't want this function nor the caller */
-		data.skip += 2;
-		frame.fp = (unsigned long)__builtin_frame_address(0);
-		frame.sp = current_stack_pointer;
-		frame.lr = (unsigned long)__builtin_return_address(0);
-		frame.pc = (unsigned long)__save_stack_trace;
+here:
+		start_stack_trace(&frame, task,
+				  (unsigned long)__builtin_frame_address(0),
+				  current_stack_pointer,
+				  (unsigned long)__builtin_return_address(0),
+				  (unsigned long)&&here);
+		/* skip this function */
+		if (unwind_frame(&frame))
+			return;
 	}
 
-	walk_stackframe(&frame, save_trace, &data);
-}
-
-void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace)
-{
-	struct stack_trace_data data;
-	struct stackframe frame;
-
-	data.trace = trace;
-	data.skip = trace->skip;
-	data.no_sched_functions = 0;
-
-	frame.fp = regs->ARM_fp;
-	frame.sp = regs->ARM_sp;
-	frame.lr = regs->ARM_lr;
-	frame.pc = regs->ARM_pc;
-
-	walk_stackframe(&frame, save_trace, &data);
-}
-
-void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
-{
-	__save_stack_trace(tsk, trace, 1);
-}
-EXPORT_SYMBOL(save_stack_trace_tsk);
-
-void save_stack_trace(struct stack_trace *trace)
-{
-	__save_stack_trace(current, trace, 0);
+	walk_stackframe(&frame, consume_entry, cookie);
 }
-EXPORT_SYMBOL_GPL(save_stack_trace);
 #endif
diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c
index 24bd20564be7..43f0a3ebf390 100644
--- a/arch/arm/kernel/suspend.c
+++ b/arch/arm/kernel/suspend.c
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <linux/ftrace.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/mm_types.h>
@@ -26,12 +27,22 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 		return -EINVAL;
 
 	/*
+	 * Function graph tracer state gets incosistent when the kernel
+	 * calls functions that never return (aka suspend finishers) hence
+	 * disable graph tracing during their execution.
+	 */
+	pause_graph_tracing();
+
+	/*
 	 * Provide a temporary page table with an identity mapping for
 	 * the MMU-enable code, required for resuming.  On successful
 	 * resume (indicated by a zero return code), we need to switch
 	 * back to the correct page tables.
 	 */
 	ret = __cpu_suspend(arg, fn, __mpidr);
+
+	unpause_graph_tracing();
+
 	if (ret == 0) {
 		cpu_switch_mm(mm->pgd, mm);
 		local_flush_bp_all();
@@ -45,7 +56,13 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 {
 	u32 __mpidr = cpu_logical_map(smp_processor_id());
-	return __cpu_suspend(arg, fn, __mpidr);
+	int ret;
+
+	pause_graph_tracing();
+	ret = __cpu_suspend(arg, fn, __mpidr);
+	unpause_graph_tracing();
+
+	return ret;
 }
 #define	idmap_pgd	NULL
 #endif
diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c
index 6166ba38bf99..fdce83c95acb 100644
--- a/arch/arm/kernel/swp_emulate.c
+++ b/arch/arm/kernel/swp_emulate.c
@@ -34,6 +34,7 @@
  */
 #define __user_swpX_asm(data, addr, res, temp, B)		\
 	__asm__ __volatile__(					\
+	".arch armv7-a\n"					\
 	"0:	ldrex"B"	%2, [%3]\n"			\
 	"1:	strex"B"	%0, %1, [%3]\n"			\
 	"	cmp		%0, #0\n"			\
@@ -195,7 +196,7 @@ static int swp_handler(struct pt_regs *regs, unsigned int instr)
 		 destreg, EXTRACT_REG_NUM(instr, RT2_OFFSET), data);
 
 	/* Check access in reasonable access range for both SWP and SWPB */
-	if (!access_ok((address & ~3), 4)) {
+	if (!access_ok((void __user *)(address & ~3), 4)) {
 		pr_debug("SWP{B} emulation: access to %p not allowed!\n",
 			 (void *)address);
 		res = -EFAULT;
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 075a2e0ed2c1..006163195d67 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -73,6 +73,7 @@
 #include <linux/syscalls.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
+#include <linux/filelock.h>
 #include <linux/cred.h>
 #include <linux/fcntl.h>
 #include <linux/eventpoll.h>
@@ -80,9 +81,12 @@
 #include <linux/socket.h>
 #include <linux/net.h>
 #include <linux/ipc.h>
+#include <linux/ipc_namespace.h>
 #include <linux/uaccess.h>
 #include <linux/slab.h>
 
+#include <asm/syscall.h>
+
 struct oldabi_stat64 {
 	unsigned long long st_dev;
 	unsigned int	__pad1;
@@ -191,60 +195,87 @@ struct oabi_flock64 {
 	pid_t	l_pid;
 } __attribute__ ((packed,aligned(4)));
 
-static long do_locks(unsigned int fd, unsigned int cmd,
-				 unsigned long arg)
+static int get_oabi_flock(struct flock64 *kernel, struct oabi_flock64 __user *arg)
 {
-	struct flock64 kernel;
 	struct oabi_flock64 user;
-	mm_segment_t fs;
-	long ret;
 
 	if (copy_from_user(&user, (struct oabi_flock64 __user *)arg,
 			   sizeof(user)))
 		return -EFAULT;
-	kernel.l_type	= user.l_type;
-	kernel.l_whence	= user.l_whence;
-	kernel.l_start	= user.l_start;
-	kernel.l_len	= user.l_len;
-	kernel.l_pid	= user.l_pid;
-
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_fcntl64(fd, cmd, (unsigned long)&kernel);
-	set_fs(fs);
-
-	if (!ret && (cmd == F_GETLK64 || cmd == F_OFD_GETLK)) {
-		user.l_type	= kernel.l_type;
-		user.l_whence	= kernel.l_whence;
-		user.l_start	= kernel.l_start;
-		user.l_len	= kernel.l_len;
-		user.l_pid	= kernel.l_pid;
-		if (copy_to_user((struct oabi_flock64 __user *)arg,
-				 &user, sizeof(user)))
-			ret = -EFAULT;
-	}
-	return ret;
+
+	kernel->l_type	 = user.l_type;
+	kernel->l_whence = user.l_whence;
+	kernel->l_start	 = user.l_start;
+	kernel->l_len	 = user.l_len;
+	kernel->l_pid	 = user.l_pid;
+
+	return 0;
+}
+
+static int put_oabi_flock(struct flock64 *kernel, struct oabi_flock64 __user *arg)
+{
+	struct oabi_flock64 user;
+
+	user.l_type	= kernel->l_type;
+	user.l_whence	= kernel->l_whence;
+	user.l_start	= kernel->l_start;
+	user.l_len	= kernel->l_len;
+	user.l_pid	= kernel->l_pid;
+
+	if (copy_to_user((struct oabi_flock64 __user *)arg,
+			 &user, sizeof(user)))
+		return -EFAULT;
+
+	return 0;
 }
 
 asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
 				 unsigned long arg)
 {
+	void __user *argp = (void __user *)arg;
+	struct fd f = fdget_raw(fd);
+	struct flock64 flock;
+	long err = -EBADF;
+
+	if (!f.file)
+		goto out;
+
 	switch (cmd) {
-	case F_OFD_GETLK:
-	case F_OFD_SETLK:
-	case F_OFD_SETLKW:
 	case F_GETLK64:
+	case F_OFD_GETLK:
+		err = security_file_fcntl(f.file, cmd, arg);
+		if (err)
+			break;
+		err = get_oabi_flock(&flock, argp);
+		if (err)
+			break;
+		err = fcntl_getlk64(f.file, cmd, &flock);
+		if (!err)
+		       err = put_oabi_flock(&flock, argp);
+		break;
 	case F_SETLK64:
 	case F_SETLKW64:
-		return do_locks(fd, cmd, arg);
-
+	case F_OFD_SETLK:
+	case F_OFD_SETLKW:
+		err = security_file_fcntl(f.file, cmd, arg);
+		if (err)
+			break;
+		err = get_oabi_flock(&flock, argp);
+		if (err)
+			break;
+		err = fcntl_setlk64(fd, f.file, cmd, &flock);
+		break;
 	default:
-		return sys_fcntl64(fd, cmd, arg);
+		err = sys_fcntl64(fd, cmd, arg);
+		break;
 	}
+	fdput(f);
+out:
+	return err;
 }
 
 struct oabi_epoll_event {
-	__u32 events;
+	__poll_t events;
 	__u64 data;
 } __attribute__ ((packed,aligned(4)));
 
@@ -264,55 +295,34 @@ asmlinkage long sys_oabi_epoll_ctl(int epfd, int op, int fd,
 
 	return do_epoll_ctl(epfd, op, fd, &kernel, false);
 }
-
-asmlinkage long sys_oabi_epoll_wait(int epfd,
-				    struct oabi_epoll_event __user *events,
-				    int maxevents, int timeout)
-{
-	struct epoll_event *kbuf;
-	struct oabi_epoll_event e;
-	mm_segment_t fs;
-	long ret, err, i;
-
-	if (maxevents <= 0 ||
-			maxevents > (INT_MAX/sizeof(*kbuf)) ||
-			maxevents > (INT_MAX/sizeof(*events)))
-		return -EINVAL;
-	if (!access_ok(events, sizeof(*events) * maxevents))
-		return -EFAULT;
-	kbuf = kmalloc_array(maxevents, sizeof(*kbuf), GFP_KERNEL);
-	if (!kbuf)
-		return -ENOMEM;
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_epoll_wait(epfd, kbuf, maxevents, timeout);
-	set_fs(fs);
-	err = 0;
-	for (i = 0; i < ret; i++) {
-		e.events = kbuf[i].events;
-		e.data = kbuf[i].data;
-		err = __copy_to_user(events, &e, sizeof(e));
-		if (err)
-			break;
-		events++;
-	}
-	kfree(kbuf);
-	return err ? -EFAULT : ret;
-}
 #else
 asmlinkage long sys_oabi_epoll_ctl(int epfd, int op, int fd,
 				   struct oabi_epoll_event __user *event)
 {
 	return -EINVAL;
 }
+#endif
 
-asmlinkage long sys_oabi_epoll_wait(int epfd,
-				    struct oabi_epoll_event __user *events,
-				    int maxevents, int timeout)
+struct epoll_event __user *
+epoll_put_uevent(__poll_t revents, __u64 data,
+		 struct epoll_event __user *uevent)
 {
-	return -EINVAL;
+	if (in_oabi_syscall()) {
+		struct oabi_epoll_event __user *oevent = (void __user *)uevent;
+
+		if (__put_user(revents, &oevent->events) ||
+		    __put_user(data, &oevent->data))
+			return NULL;
+
+		return (void __user *)(oevent+1);
+	}
+
+	if (__put_user(revents, &uevent->events) ||
+	    __put_user(data, &uevent->data))
+		return NULL;
+
+	return uevent+1;
 }
-#endif
 
 struct oabi_sembuf {
 	unsigned short	sem_num;
@@ -321,46 +331,52 @@ struct oabi_sembuf {
 	unsigned short	__pad;
 };
 
+#define sc_semopm     sem_ctls[2]
+
+#ifdef CONFIG_SYSVIPC
 asmlinkage long sys_oabi_semtimedop(int semid,
 				    struct oabi_sembuf __user *tsops,
 				    unsigned nsops,
 				    const struct old_timespec32 __user *timeout)
 {
+	struct ipc_namespace *ns;
 	struct sembuf *sops;
-	struct old_timespec32 local_timeout;
 	long err;
 	int i;
 
+	ns = current->nsproxy->ipc_ns;
+	if (nsops > ns->sc_semopm)
+		return -E2BIG;
 	if (nsops < 1 || nsops > SEMOPM)
 		return -EINVAL;
-	if (!access_ok(tsops, sizeof(*tsops) * nsops))
-		return -EFAULT;
-	sops = kmalloc_array(nsops, sizeof(*sops), GFP_KERNEL);
+	sops = kvmalloc_array(nsops, sizeof(*sops), GFP_KERNEL);
 	if (!sops)
 		return -ENOMEM;
 	err = 0;
 	for (i = 0; i < nsops; i++) {
 		struct oabi_sembuf osb;
-		err |= __copy_from_user(&osb, tsops, sizeof(osb));
+		err |= copy_from_user(&osb, tsops, sizeof(osb));
 		sops[i].sem_num = osb.sem_num;
 		sops[i].sem_op = osb.sem_op;
 		sops[i].sem_flg = osb.sem_flg;
 		tsops++;
 	}
-	if (timeout) {
-		/* copy this as well before changing domain protection */
-		err |= copy_from_user(&local_timeout, timeout, sizeof(*timeout));
-		timeout = &local_timeout;
-	}
 	if (err) {
 		err = -EFAULT;
-	} else {
-		mm_segment_t fs = get_fs();
-		set_fs(KERNEL_DS);
-		err = sys_semtimedop_time32(semid, sops, nsops, timeout);
-		set_fs(fs);
+		goto out;
 	}
-	kfree(sops);
+
+	if (timeout) {
+		struct timespec64 ts;
+		err = get_old_timespec32(&ts, timeout);
+		if (err)
+			goto out;
+		err = __do_semtimedop(semid, sops, nsops, &ts, ns);
+		goto out;
+	}
+	err = __do_semtimedop(semid, sops, nsops, NULL, ns);
+out:
+	kvfree(sops);
 	return err;
 }
 
@@ -387,6 +403,27 @@ asmlinkage int sys_oabi_ipc(uint call, int first, int second, int third,
 		return sys_ipc(call, first, second, third, ptr, fifth);
 	}
 }
+#else
+asmlinkage long sys_oabi_semtimedop(int semid,
+				    struct oabi_sembuf __user *tsops,
+				    unsigned nsops,
+				    const struct old_timespec32 __user *timeout)
+{
+	return -ENOSYS;
+}
+
+asmlinkage long sys_oabi_semop(int semid, struct oabi_sembuf __user *tsops,
+			       unsigned nsops)
+{
+	return -ENOSYS;
+}
+
+asmlinkage int sys_oabi_ipc(uint call, int first, int second, int third,
+			    void __user *ptr, long fifth)
+{
+	return -ENOSYS;
+}
+#endif
 
 asmlinkage long sys_oabi_bind(int fd, struct sockaddr __user *addr, int addrlen)
 {
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 17d5a785df28..40c7c807d67f 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -30,11 +30,13 @@
 #include <linux/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/exception.h>
+#include <asm/spectre.h>
 #include <asm/unistd.h>
 #include <asm/traps.h>
 #include <asm/ptrace.h>
 #include <asm/unwind.h>
 #include <asm/tls.h>
+#include <asm/stacktrace.h>
 #include <asm/system_misc.h>
 #include <asm/opcodes.h>
 
@@ -60,19 +62,32 @@ static int __init user_debug_setup(char *str)
 __setup("user_debug=", user_debug_setup);
 #endif
 
-static void dump_mem(const char *, const char *, unsigned long, unsigned long);
-
 void dump_backtrace_entry(unsigned long where, unsigned long from,
 			  unsigned long frame, const char *loglvl)
 {
 	unsigned long end = frame + 4 + sizeof(struct pt_regs);
 
-#ifdef CONFIG_KALLSYMS
+	if (IS_ENABLED(CONFIG_UNWINDER_FRAME_POINTER) &&
+	    IS_ENABLED(CONFIG_CC_IS_GCC) &&
+	    end > ALIGN(frame, THREAD_SIZE)) {
+		/*
+		 * If we are walking past the end of the stack, it may be due
+		 * to the fact that we are on an IRQ or overflow stack. In this
+		 * case, we can load the address of the other stack from the
+		 * frame record.
+		 */
+		frame = ((unsigned long *)frame)[-2] - 4;
+		end = frame + 4 + sizeof(struct pt_regs);
+	}
+
+#ifndef CONFIG_KALLSYMS
+	printk("%sFunction entered at [<%08lx>] from [<%08lx>]\n",
+		loglvl, where, from);
+#elif defined CONFIG_BACKTRACE_VERBOSE
 	printk("%s[<%08lx>] (%ps) from [<%08lx>] (%pS)\n",
 		loglvl, where, (void *)where, from, (void *)from);
 #else
-	printk("%sFunction entered at [<%08lx>] from [<%08lx>]\n",
-		loglvl, where, from);
+	printk("%s %ps from %pS\n", loglvl, (void *)where, (void *)from);
 #endif
 
 	if (in_entry_text(from) && end <= ALIGN(frame, THREAD_SIZE))
@@ -108,7 +123,8 @@ void dump_backtrace_stm(u32 *stack, u32 instruction, const char *loglvl)
 static int verify_stack(unsigned long sp)
 {
 	if (sp < PAGE_OFFSET ||
-	    (sp > (unsigned long)high_memory && high_memory != NULL))
+	    (!IS_ENABLED(CONFIG_VMAP_STACK) &&
+	     sp > (unsigned long)high_memory && high_memory != NULL))
 		return -EFAULT;
 
 	return 0;
@@ -118,21 +134,12 @@ static int verify_stack(unsigned long sp)
 /*
  * Dump out the contents of some memory nicely...
  */
-static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
-		     unsigned long top)
+void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+	      unsigned long top)
 {
 	unsigned long first;
-	mm_segment_t fs;
 	int i;
 
-	/*
-	 * We need to switch to kernel mode so that we can use __get_user
-	 * to safely read from kernel space.  Note that we now dump the
-	 * code first, just in case the backtrace kills us.
-	 */
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-
 	printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top);
 
 	for (first = bottom & ~31; first < top; first += 32) {
@@ -145,7 +152,7 @@ static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
 		for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
 			if (p >= bottom && p < top) {
 				unsigned long val;
-				if (__get_user(val, (unsigned long *)p) == 0)
+				if (!get_kernel_nofault(val, (unsigned long *)p))
 					sprintf(str + i * 9, " %08lx", val);
 				else
 					sprintf(str + i * 9, " ????????");
@@ -153,11 +160,9 @@ static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
 		}
 		printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
 	}
-
-	set_fs(fs);
 }
 
-static void __dump_instr(const char *lvl, struct pt_regs *regs)
+static void dump_instr(const char *lvl, struct pt_regs *regs)
 {
 	unsigned long addr = instruction_pointer(regs);
 	const int thumb = thumb_mode(regs);
@@ -173,10 +178,23 @@ static void __dump_instr(const char *lvl, struct pt_regs *regs)
 	for (i = -4; i < 1 + !!thumb; i++) {
 		unsigned int val, bad;
 
-		if (thumb)
-			bad = get_user(val, &((u16 *)addr)[i]);
-		else
-			bad = get_user(val, &((u32 *)addr)[i]);
+		if (thumb) {
+			u16 tmp;
+
+			if (user_mode(regs))
+				bad = get_user(tmp, &((u16 __user *)addr)[i]);
+			else
+				bad = get_kernel_nofault(tmp, &((u16 *)addr)[i]);
+
+			val = __mem_to_opcode_thumb16(tmp);
+		} else {
+			if (user_mode(regs))
+				bad = get_user(val, &((u32 __user *)addr)[i]);
+			else
+				bad = get_kernel_nofault(val, &((u32 *)addr)[i]);
+
+			val = __mem_to_opcode_arm(val);
+		}
 
 		if (!bad)
 			p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
@@ -189,29 +207,15 @@ static void __dump_instr(const char *lvl, struct pt_regs *regs)
 	printk("%sCode: %s\n", lvl, str);
 }
 
-static void dump_instr(const char *lvl, struct pt_regs *regs)
-{
-	mm_segment_t fs;
-
-	if (!user_mode(regs)) {
-		fs = get_fs();
-		set_fs(KERNEL_DS);
-		__dump_instr(lvl, regs);
-		set_fs(fs);
-	} else {
-		__dump_instr(lvl, regs);
-	}
-}
-
 #ifdef CONFIG_ARM_UNWIND
-static inline void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
-				  const char *loglvl)
+void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+		    const char *loglvl)
 {
 	unwind_backtrace(regs, tsk, loglvl);
 }
 #else
-static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
-			   const char *loglvl)
+void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+		    const char *loglvl)
 {
 	unsigned int fp, mode;
 	int ok = 1;
@@ -287,12 +291,14 @@ static int __die(const char *str, int err, struct pt_regs *regs)
 
 	print_modules();
 	__show_regs(regs);
+	__show_regs_alloc_free(regs);
 	pr_emerg("Process %.*s (pid: %d, stack limit = 0x%p)\n",
 		 TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), end_of_stack(tsk));
 
 	if (!user_mode(regs) || in_interrupt()) {
 		dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
-			 THREAD_SIZE + (unsigned long)task_stack_page(tsk));
+			 ALIGN(regs->ARM_sp - THREAD_SIZE, THREAD_ALIGN)
+			 + THREAD_SIZE);
 		dump_backtrace(regs, tsk, KERN_EMERG);
 		dump_instr(KERN_EMERG, regs);
 	}
@@ -347,7 +353,7 @@ static void oops_end(unsigned long flags, struct pt_regs *regs, int signr)
 	if (panic_on_oops)
 		panic("Fatal exception");
 	if (signr)
-		do_exit(signr);
+		make_task_dead(signr);
 }
 
 /*
@@ -484,7 +490,7 @@ asmlinkage void do_undefinstr(struct pt_regs *regs)
 die_sig:
 #ifdef CONFIG_DEBUG_USER
 	if (user_debug & UDBG_UNDEFINED) {
-		pr_info("%s (%d): undefined instruction: pc=%p\n",
+		pr_info("%s (%d): undefined instruction: pc=%px\n",
 			current->comm, task_pid_nr(current), pc);
 		__show_regs(regs);
 		dump_instr(KERN_INFO, regs);
@@ -588,7 +594,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 	if (end < start || flags)
 		return -EINVAL;
 
-	if (!access_ok(start, end - start))
+	if (!access_ok((void __user *)start, end - start))
 		return -EFAULT;
 
 	return __do_cache_op(start, end);
@@ -780,11 +786,6 @@ void abort(void)
 	panic("Oops failed to kill thread");
 }
 
-void __init trap_init(void)
-{
-	return;
-}
-
 #ifdef CONFIG_KUSER_HELPERS
 static void __init kuser_init(void *vectors)
 {
@@ -806,10 +807,59 @@ static inline void __init kuser_init(void *vectors)
 }
 #endif
 
+#ifndef CONFIG_CPU_V7M
+static void copy_from_lma(void *vma, void *lma_start, void *lma_end)
+{
+	memcpy(vma, lma_start, lma_end - lma_start);
+}
+
+static void flush_vectors(void *vma, size_t offset, size_t size)
+{
+	unsigned long start = (unsigned long)vma + offset;
+	unsigned long end = start + size;
+
+	flush_icache_range(start, end);
+}
+
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+int spectre_bhb_update_vectors(unsigned int method)
+{
+	extern char __vectors_bhb_bpiall_start[], __vectors_bhb_bpiall_end[];
+	extern char __vectors_bhb_loop8_start[], __vectors_bhb_loop8_end[];
+	void *vec_start, *vec_end;
+
+	if (system_state >= SYSTEM_FREEING_INITMEM) {
+		pr_err("CPU%u: Spectre BHB workaround too late - system vulnerable\n",
+		       smp_processor_id());
+		return SPECTRE_VULNERABLE;
+	}
+
+	switch (method) {
+	case SPECTRE_V2_METHOD_LOOP8:
+		vec_start = __vectors_bhb_loop8_start;
+		vec_end = __vectors_bhb_loop8_end;
+		break;
+
+	case SPECTRE_V2_METHOD_BPIALL:
+		vec_start = __vectors_bhb_bpiall_start;
+		vec_end = __vectors_bhb_bpiall_end;
+		break;
+
+	default:
+		pr_err("CPU%u: unknown Spectre BHB state %d\n",
+		       smp_processor_id(), method);
+		return SPECTRE_VULNERABLE;
+	}
+
+	copy_from_lma(vectors_page, vec_start, vec_end);
+	flush_vectors(vectors_page, 0, vec_end - vec_start);
+
+	return SPECTRE_MITIGATED;
+}
+#endif
+
 void __init early_trap_init(void *vectors_base)
 {
-#ifndef CONFIG_CPU_V7M
-	unsigned long vectors = (unsigned long)vectors_base;
 	extern char __stubs_start[], __stubs_end[];
 	extern char __vectors_start[], __vectors_end[];
 	unsigned i;
@@ -830,17 +880,87 @@ void __init early_trap_init(void *vectors_base)
 	 * into the vector page, mapped at 0xffff0000, and ensure these
 	 * are visible to the instruction stream.
 	 */
-	memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
-	memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start);
+	copy_from_lma(vectors_base, __vectors_start, __vectors_end);
+	copy_from_lma(vectors_base + 0x1000, __stubs_start, __stubs_end);
 
 	kuser_init(vectors_base);
 
-	flush_icache_range(vectors, vectors + PAGE_SIZE * 2);
+	flush_vectors(vectors_base, 0, PAGE_SIZE * 2);
+}
 #else /* ifndef CONFIG_CPU_V7M */
+void __init early_trap_init(void *vectors_base)
+{
 	/*
 	 * on V7-M there is no need to copy the vector table to a dedicated
 	 * memory area. The address is configurable and so a table in the kernel
 	 * image can be used.
 	 */
+}
+#endif
+
+#ifdef CONFIG_VMAP_STACK
+
+DECLARE_PER_CPU(u8 *, irq_stack_ptr);
+
+asmlinkage DEFINE_PER_CPU(u8 *, overflow_stack_ptr);
+
+static int __init allocate_overflow_stacks(void)
+{
+	u8 *stack;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		stack = (u8 *)__get_free_page(GFP_KERNEL);
+		if (WARN_ON(!stack))
+			return -ENOMEM;
+		per_cpu(overflow_stack_ptr, cpu) = &stack[OVERFLOW_STACK_SIZE];
+	}
+	return 0;
+}
+early_initcall(allocate_overflow_stacks);
+
+asmlinkage void handle_bad_stack(struct pt_regs *regs)
+{
+	unsigned long tsk_stk = (unsigned long)current->stack;
+#ifdef CONFIG_IRQSTACKS
+	unsigned long irq_stk = (unsigned long)raw_cpu_read(irq_stack_ptr);
+#endif
+	unsigned long ovf_stk = (unsigned long)raw_cpu_read(overflow_stack_ptr);
+
+	console_verbose();
+	pr_emerg("Insufficient stack space to handle exception!");
+
+	pr_emerg("Task stack:     [0x%08lx..0x%08lx]\n",
+		 tsk_stk, tsk_stk + THREAD_SIZE);
+#ifdef CONFIG_IRQSTACKS
+	pr_emerg("IRQ stack:      [0x%08lx..0x%08lx]\n",
+		 irq_stk - THREAD_SIZE, irq_stk);
 #endif
+	pr_emerg("Overflow stack: [0x%08lx..0x%08lx]\n",
+		 ovf_stk - OVERFLOW_STACK_SIZE, ovf_stk);
+
+	die("kernel stack overflow", regs, 0);
+}
+
+#ifndef CONFIG_ARM_LPAE
+/*
+ * Normally, we rely on the logic in do_translation_fault() to update stale PMD
+ * entries covering the vmalloc space in a task's page tables when it first
+ * accesses the region in question. Unfortunately, this is not sufficient when
+ * the task stack resides in the vmalloc region, as do_translation_fault() is a
+ * C function that needs a stack to run.
+ *
+ * So we need to ensure that these PMD entries are up to date *before* the MM
+ * switch. As we already have some logic in the MM switch path that takes care
+ * of this, let's trigger it by bumping the counter every time the core vmalloc
+ * code modifies a PMD entry in the vmalloc region. Use release semantics on
+ * the store so that other CPUs observing the counter's new value are
+ * guaranteed to see the updated page table entries as well.
+ */
+void arch_sync_kernel_mappings(unsigned long start, unsigned long end)
+{
+	if (start < VMALLOC_END && end > VMALLOC_START)
+		atomic_inc_return_release(&init_mm.context.vmalloc_seq);
 }
+#endif
+#endif
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 59fdf257bf8b..9d2192156087 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -28,11 +28,14 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/list.h>
+#include <linux/module.h>
 
 #include <asm/stacktrace.h>
 #include <asm/traps.h>
 #include <asm/unwind.h>
 
+#include "reboot.h"
+
 /* Dummy functions to avoid linker complaints */
 void __aeabi_unwind_cpp_pr0(void)
 {
@@ -53,6 +56,7 @@ struct unwind_ctrl_block {
 	unsigned long vrs[16];		/* virtual register set */
 	const unsigned long *insn;	/* pointer to the current instructions word */
 	unsigned long sp_high;		/* highest value of sp allowed */
+	unsigned long *lr_addr;		/* address of LR value on the stack */
 	/*
 	 * 1 : check for stack overflow for each register pop.
 	 * 0 : save overhead if there is plenty of stack remaining.
@@ -237,6 +241,8 @@ static int unwind_pop_register(struct unwind_ctrl_block *ctrl,
 	 * from being tracked by KASAN.
 	 */
 	ctrl->vrs[reg] = READ_ONCE_NOCHECK(*(*vsp));
+	if (reg == 14)
+		ctrl->lr_addr = *vsp;
 	(*vsp)++;
 	return URC_OK;
 }
@@ -256,8 +262,9 @@ static int unwind_exec_pop_subset_r4_to_r13(struct unwind_ctrl_block *ctrl,
 		mask >>= 1;
 		reg++;
 	}
-	if (!load_sp)
+	if (!load_sp) {
 		ctrl->vrs[SP] = (unsigned long)vsp;
+	}
 
 	return URC_OK;
 }
@@ -301,6 +308,29 @@ static int unwind_exec_pop_subset_r0_to_r3(struct unwind_ctrl_block *ctrl,
 	return URC_OK;
 }
 
+static unsigned long unwind_decode_uleb128(struct unwind_ctrl_block *ctrl)
+{
+	unsigned long bytes = 0;
+	unsigned long insn;
+	unsigned long result = 0;
+
+	/*
+	 * unwind_get_byte() will advance `ctrl` one instruction at a time, so
+	 * loop until we get an instruction byte where bit 7 is not set.
+	 *
+	 * Note: This decodes a maximum of 4 bytes to output 28 bits data where
+	 * max is 0xfffffff: that will cover a vsp increment of 1073742336, hence
+	 * it is sufficient for unwinding the stack.
+	 */
+	do {
+		insn = unwind_get_byte(ctrl);
+		result |= (insn & 0x7f) << (bytes * 7);
+		bytes++;
+	} while (!!(insn & 0x80) && (bytes != sizeof(result)));
+
+	return result;
+}
+
 /*
  * Execute the current unwind instruction.
  */
@@ -313,9 +343,9 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 
 	if ((insn & 0xc0) == 0x00)
 		ctrl->vrs[SP] += ((insn & 0x3f) << 2) + 4;
-	else if ((insn & 0xc0) == 0x40)
+	else if ((insn & 0xc0) == 0x40) {
 		ctrl->vrs[SP] -= ((insn & 0x3f) << 2) + 4;
-	else if ((insn & 0xf0) == 0x80) {
+	} else if ((insn & 0xf0) == 0x80) {
 		unsigned long mask;
 
 		insn = (insn << 8) | unwind_get_byte(ctrl);
@@ -330,9 +360,9 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 		if (ret)
 			goto error;
 	} else if ((insn & 0xf0) == 0x90 &&
-		   (insn & 0x0d) != 0x0d)
+		   (insn & 0x0d) != 0x0d) {
 		ctrl->vrs[SP] = ctrl->vrs[insn & 0x0f];
-	else if ((insn & 0xf0) == 0xa0) {
+	} else if ((insn & 0xf0) == 0xa0) {
 		ret = unwind_exec_pop_r4_to_rN(ctrl, insn);
 		if (ret)
 			goto error;
@@ -354,7 +384,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 		if (ret)
 			goto error;
 	} else if (insn == 0xb2) {
-		unsigned long uleb128 = unwind_get_byte(ctrl);
+		unsigned long uleb128 = unwind_decode_uleb128(ctrl);
 
 		ctrl->vrs[SP] += 0x204 + (uleb128 << 2);
 	} else {
@@ -375,23 +405,32 @@ error:
  */
 int unwind_frame(struct stackframe *frame)
 {
-	unsigned long low;
 	const struct unwind_idx *idx;
 	struct unwind_ctrl_block ctrl;
+	unsigned long sp_low;
 
 	/* store the highest address on the stack to avoid crossing it*/
-	low = frame->sp;
-	ctrl.sp_high = ALIGN(low, THREAD_SIZE);
+	sp_low = frame->sp;
+	ctrl.sp_high = ALIGN(sp_low - THREAD_SIZE, THREAD_ALIGN)
+		       + THREAD_SIZE;
 
 	pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
 		 frame->pc, frame->lr, frame->sp);
 
-	if (!kernel_text_address(frame->pc))
-		return -URC_FAILURE;
-
 	idx = unwind_find_idx(frame->pc);
 	if (!idx) {
-		pr_warn("unwind: Index not found %08lx\n", frame->pc);
+		if (frame->pc && kernel_text_address(frame->pc)) {
+			if (in_module_plt(frame->pc) && frame->pc != frame->lr) {
+				/*
+				 * Quoting Ard: Veneers only set PC using a
+				 * PC+immediate LDR, and so they don't affect
+				 * the state of the stack or the register file
+				 */
+				frame->pc = frame->lr;
+				return URC_OK;
+			}
+			pr_warn("unwind: Index not found %08lx\n", frame->pc);
+		}
 		return -URC_FAILURE;
 	}
 
@@ -403,7 +442,20 @@ int unwind_frame(struct stackframe *frame)
 	if (idx->insn == 1)
 		/* can't unwind */
 		return -URC_FAILURE;
-	else if ((idx->insn & 0x80000000) == 0)
+	else if (frame->pc == prel31_to_addr(&idx->addr_offset)) {
+		/*
+		 * Unwinding is tricky when we're halfway through the prologue,
+		 * since the stack frame that the unwinder expects may not be
+		 * fully set up yet. However, one thing we do know for sure is
+		 * that if we are unwinding from the very first instruction of
+		 * a function, we are still effectively in the stack frame of
+		 * the caller, and the unwind info has no relevance yet.
+		 */
+		if (frame->pc == frame->lr)
+			return -URC_FAILURE;
+		frame->pc = frame->lr;
+		return URC_OK;
+	} else if ((idx->insn & 0x80000000) == 0)
 		/* prel31 to the unwind table */
 		ctrl.insn = (unsigned long *)prel31_to_addr(&idx->insn);
 	else if ((idx->insn & 0xff000000) == 0x80000000)
@@ -430,6 +482,16 @@ int unwind_frame(struct stackframe *frame)
 
 	ctrl.check_each_pop = 0;
 
+	if (prel31_to_addr(&idx->addr_offset) == (u32)&call_with_stack) {
+		/*
+		 * call_with_stack() is the only place where we permit SP to
+		 * jump from one stack to another, and since we know it is
+		 * guaranteed to happen, set up the SP bounds accordingly.
+		 */
+		sp_low = frame->fp;
+		ctrl.sp_high = ALIGN(frame->fp, THREAD_SIZE);
+	}
+
 	while (ctrl.entries > 0) {
 		int urc;
 		if ((ctrl.sp_high - ctrl.vrs[SP]) < sizeof(ctrl.vrs))
@@ -437,7 +499,7 @@ int unwind_frame(struct stackframe *frame)
 		urc = unwind_exec_insn(&ctrl);
 		if (urc < 0)
 			return urc;
-		if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= ctrl.sp_high)
+		if (ctrl.vrs[SP] < sp_low || ctrl.vrs[SP] > ctrl.sp_high)
 			return -URC_FAILURE;
 	}
 
@@ -452,6 +514,7 @@ int unwind_frame(struct stackframe *frame)
 	frame->sp = ctrl.vrs[SP];
 	frame->lr = ctrl.vrs[LR];
 	frame->pc = ctrl.vrs[PC];
+	frame->lr_addr = ctrl.lr_addr;
 
 	return URC_OK;
 }
@@ -475,7 +538,12 @@ void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk,
 		frame.fp = (unsigned long)__builtin_frame_address(0);
 		frame.sp = current_stack_pointer;
 		frame.lr = (unsigned long)__builtin_return_address(0);
-		frame.pc = (unsigned long)unwind_backtrace;
+		/* We are saving the stack and execution state at this
+		 * point, so we should ensure that frame.pc is within
+		 * this block of code.
+		 */
+here:
+		frame.pc = (unsigned long)&&here;
 	} else {
 		/* task blocked in __switch_to */
 		frame.fp = thread_saved_fp(tsk);
diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S
index 50136828f5b5..76678732c60d 100644
--- a/arch/arm/kernel/vmlinux-xip.lds.S
+++ b/arch/arm/kernel/vmlinux-xip.lds.S
@@ -40,6 +40,10 @@ SECTIONS
 		ARM_DISCARD
 		*(.alt.smp.init)
 		*(.pv_table)
+#ifndef CONFIG_ARM_UNWIND
+		*(.ARM.exidx) *(.ARM.exidx.*)
+		*(.ARM.extab) *(.ARM.extab.*)
+#endif
 	}
 
 	. = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
@@ -162,7 +166,9 @@ SECTIONS
  * binutils is too old (for other reasons as well)
  */
 ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support")
+#ifndef CONFIG_COMPILE_TEST
 ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
+#endif
 
 #ifdef CONFIG_XIP_DEFLATED_DATA
 /*
@@ -172,7 +178,7 @@ ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
 ASSERT((_end - __bss_start) >= 12288, ".bss too small for CONFIG_XIP_DEFLATED_DATA")
 #endif
 
-#ifdef CONFIG_ARM_MPU
+#if defined(CONFIG_ARM_MPU) && !defined(CONFIG_COMPILE_TEST)
 /*
  * Due to PMSAv7 restriction on base address and size we have to
  * enforce minimal alignment restrictions. It was seen that weaker
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index f7f4620d59c3..aa12b65a7fd6 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -47,7 +47,7 @@ SECTIONS
 #endif
 	}
 
-	. = PAGE_OFFSET + TEXT_OFFSET;
+	. = KERNEL_OFFSET + TEXT_OFFSET;
 	.head.text : {
 		_text = .;
 		HEAD_TEXT
@@ -138,12 +138,12 @@ SECTIONS
 #ifdef CONFIG_STRICT_KERNEL_RWX
 	. = ALIGN(1<<SECTION_SHIFT);
 #else
-	. = ALIGN(THREAD_SIZE);
+	. = ALIGN(THREAD_ALIGN);
 #endif
 	__init_end = .;
 
 	_sdata = .;
-	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_ALIGN)
 	_edata = .;
 
 	BSS_SECTION(0, 0, 0)
@@ -174,6 +174,8 @@ __start_rodata_section_aligned = ALIGN(__start_rodata, 1 << SECTION_SHIFT);
  * binutils is too old (for other reasons as well)
  */
 ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support")
+#ifndef CONFIG_COMPILE_TEST
 ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
+#endif
 
 #endif /* CONFIG_XIP_KERNEL */
diff --git a/arch/arm/kernel/xscale-cp0.c b/arch/arm/kernel/xscale-cp0.c
index ed4f6e77616d..00d00d3aae97 100644
--- a/arch/arm/kernel/xscale-cp0.c
+++ b/arch/arm/kernel/xscale-cp0.c
@@ -166,6 +166,7 @@ static int __init xscale_cp0_init(void)
 		pr_info("XScale iWMMXt coprocessor detected.\n");
 		elf_hwcap |= HWCAP_IWMMXT;
 		thread_register_notifier(&iwmmxt_notifier_block);
+		register_iwmmxt_undef_handler();
 #endif
 	} else {
 		pr_info("XScale DSP coprocessor detected.\n");
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 6d2ba454f25b..650404be6768 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -36,10 +36,6 @@ else
   lib-y	+= io-readsw-armv4.o io-writesw-armv4.o
 endif
 
-ifeq ($(CONFIG_ARCH_RPC),y)
-  AFLAGS_delay-loop.o		+= -march=armv4
-endif
-
 $(obj)/csumpartialcopy.o:	$(obj)/csumpartialcopygeneric.S
 $(obj)/csumpartialcopyuser.o:	$(obj)/csumpartialcopygeneric.S
 
@@ -48,3 +44,5 @@ ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
   CFLAGS_xor-neon.o		+= $(NEON_FLAGS)
   obj-$(CONFIG_XOR_BLOCKS)	+= xor-neon.o
 endif
+
+obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
diff --git a/arch/arm/lib/backtrace-clang.S b/arch/arm/lib/backtrace-clang.S
index 6174c45f53a5..290c52a60fc6 100644
--- a/arch/arm/lib/backtrace-clang.S
+++ b/arch/arm/lib/backtrace-clang.S
@@ -144,7 +144,7 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
  */
 1003:		ldr	sv_lr, [sv_fp, #4]	@ get saved lr from next frame
 
-		ldr	r0, [sv_lr, #-4]	@ get call instruction
+1004:		ldr	r0, [sv_lr, #-4]	@ get call instruction
 		ldr	r3, .Lopcode+4
 		and	r2, r3, r0		@ is this a bl call
 		teq	r2, r3
@@ -164,7 +164,7 @@ finished_setup:
 /*
  * Print the function (sv_pc) and where it was called from (sv_lr).
  */
-1004:		mov	r0, sv_pc
+		mov	r0, sv_pc
 
 		mov	r1, sv_lr
 		mov	r2, frame
@@ -197,12 +197,20 @@ finished_setup:
 
 		cmp	sv_fp, frame		@ next frame must be
 		mov	frame, sv_fp		@ above the current frame
+#ifdef CONFIG_IRQSTACKS
+		@
+		@ Kernel stacks may be discontiguous in memory. If the next
+		@ frame is below the previous frame, accept it as long as it
+		@ lives in kernel memory.
+		@
+		cmpls	sv_fp, #PAGE_OFFSET
+#endif
 		bhi	for_each_frame
 
 1006:		adr	r0, .Lbad
 		mov	r1, loglvl
 		mov	r2, frame
-		bl	printk
+		bl	_printk
 no_frame:	ldmfd	sp!, {r4 - r9, fp, pc}
 ENDPROC(c_backtrace)
 		.pushsection __ex_table,"a"
@@ -210,7 +218,7 @@ ENDPROC(c_backtrace)
 		.long	1001b, 1006b
 		.long	1002b, 1006b
 		.long	1003b, 1006b
-		.long	1004b, 1006b
+		.long	1004b, finished_setup
 		.long   1005b, 1006b
 		.popsection
 
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index 872f658638d9..293a2716bd20 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -98,12 +98,20 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
 
 		cmp	sv_fp, frame		@ next frame must be
 		mov	frame, sv_fp		@ above the current frame
+#ifdef CONFIG_IRQSTACKS
+		@
+		@ Kernel stacks may be discontiguous in memory. If the next
+		@ frame is below the previous frame, accept it as long as it
+		@ lives in kernel memory.
+		@
+		cmpls	sv_fp, #PAGE_OFFSET
+#endif
 		bhi	for_each_frame
 
 1006:		adr	r0, .Lbad
 		mov	r1, loglvl
 		mov	r2, frame
-		bl	printk
+		bl	_printk
 no_frame:	ldmfd	sp!, {r4 - r9, pc}
 ENDPROC(c_backtrace)
 		
diff --git a/arch/arm/lib/call_with_stack.S b/arch/arm/lib/call_with_stack.S
index 28b0341ae786..5030d4e8d126 100644
--- a/arch/arm/lib/call_with_stack.S
+++ b/arch/arm/lib/call_with_stack.S
@@ -8,25 +8,44 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
 
 /*
  * void call_with_stack(void (*fn)(void *), void *arg, void *sp)
  *
  * Change the stack to that pointed at by sp, then invoke fn(arg) with
  * the new stack.
+ *
+ * The sequence below follows the APCS frame convention for frame pointer
+ * unwinding, and implements the unwinder annotations needed by the EABI
+ * unwinder.
  */
-ENTRY(call_with_stack)
-	str	sp, [r2, #-4]!
-	str	lr, [r2, #-4]!
 
+ENTRY(call_with_stack)
+#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
+	mov	ip, sp
+	push	{fp, ip, lr, pc}
+	sub	fp, ip, #4
+#else
+UNWIND( .fnstart		)
+UNWIND( .save	{fpreg, lr}	)
+	push	{fpreg, lr}
+UNWIND( .setfp	fpreg, sp	)
+	mov	fpreg, sp
+#endif
 	mov	sp, r2
 	mov	r2, r0
 	mov	r0, r1
 
-	badr	lr, 1f
-	ret	r2
+	bl_r	r2
 
-1:	ldr	lr, [sp]
-	ldr	sp, [sp, #4]
-	ret	lr
+#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
+	ldmdb	fp, {fp, sp, pc}
+#else
+	mov	sp, fpreg
+	pop	{fpreg, pc}
+UNWIND( .fnend			)
+#endif
+	.globl call_with_stack_end
+call_with_stack_end:
 ENDPROC(call_with_stack)
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index f8016e3db65d..270de7debd0f 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -91,26 +91,22 @@
 	strb\cond \reg, [\ptr], #1
 	.endm
 
-	.macro enter reg1 reg2
+	.macro enter regs:vararg
 	mov	r3, #0
-	stmdb	sp!, {r0, r2, r3, \reg1, \reg2}
+UNWIND( .save	{r0, r2, r3, \regs}		)
+	stmdb	sp!, {r0, r2, r3, \regs}
 	.endm
 
-	.macro usave reg1 reg2
-	UNWIND(	.save {r0, r2, r3, \reg1, \reg2}	)
-	.endm
-
-	.macro exit reg1 reg2
+	.macro exit regs:vararg
 	add	sp, sp, #8
-	ldmfd	sp!, {r0, \reg1, \reg2}
+	ldmfd	sp!, {r0, \regs}
 	.endm
 
 	.text
 
 ENTRY(arm_copy_from_user)
 #ifdef CONFIG_CPU_SPECTRE
-	get_thread_info r3
-	ldr	r3, [r3, #TI_ADDR_LIMIT]
+	ldr	r3, =TASK_SIZE
 	uaccess_mask_range_ptr r1, r2, r3, ip
 #endif
 
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
index 810a805d36dc..8fbafb074fe9 100644
--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -69,13 +69,10 @@
  *	than one 32bit instruction in Thumb-2)
  */
 
-
-	UNWIND(	.fnstart			)
-		enter	r4, lr
-	UNWIND(	.fnend				)
-
 	UNWIND(	.fnstart			)
-		usave	r4, lr			  @ in first stmdb block
+		enter	r4, UNWIND(fpreg,) lr
+	UNWIND(	.setfp	fpreg, sp		)
+	UNWIND(	mov	fpreg, sp		)
 
 		subs	r2, r2, #4
 		blt	8f
@@ -86,12 +83,7 @@
 		bne	10f
 
 1:		subs	r2, r2, #(28)
-		stmfd	sp!, {r5 - r8}
-	UNWIND(	.fnend				)
-
-	UNWIND(	.fnstart			)
-		usave	r4, lr
-	UNWIND(	.save	{r5 - r8}		) @ in second stmfd block
+		stmfd	sp!, {r5, r6, r8, r9}
 		blt	5f
 
 	CALGN(	ands	ip, r0, #31		)
@@ -110,9 +102,9 @@
 	PLD(	pld	[r1, #92]		)
 
 3:	PLD(	pld	[r1, #124]		)
-4:		ldr8w	r1, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
+4:		ldr8w	r1, r3, r4, r5, r6, r8, r9, ip, lr, abort=20f
 		subs	r2, r2, #32
-		str8w	r0, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
+		str8w	r0, r3, r4, r5, r6, r8, r9, ip, lr, abort=20f
 		bge	3b
 	PLD(	cmn	r2, #96			)
 	PLD(	bge	4b			)
@@ -132,8 +124,8 @@
 		ldr1w	r1, r4, abort=20f
 		ldr1w	r1, r5, abort=20f
 		ldr1w	r1, r6, abort=20f
-		ldr1w	r1, r7, abort=20f
 		ldr1w	r1, r8, abort=20f
+		ldr1w	r1, r9, abort=20f
 		ldr1w	r1, lr, abort=20f
 
 #if LDR1W_SHIFT < STR1W_SHIFT
@@ -150,17 +142,14 @@
 		str1w	r0, r4, abort=20f
 		str1w	r0, r5, abort=20f
 		str1w	r0, r6, abort=20f
-		str1w	r0, r7, abort=20f
 		str1w	r0, r8, abort=20f
+		str1w	r0, r9, abort=20f
 		str1w	r0, lr, abort=20f
 
 	CALGN(	bcs	2b			)
 
-7:		ldmfd	sp!, {r5 - r8}
-	UNWIND(	.fnend				) @ end of second stmfd block
+7:		ldmfd	sp!, {r5, r6, r8, r9}
 
-	UNWIND(	.fnstart			)
-		usave	r4, lr			  @ still in first stmdb block
 8:		movs	r2, r2, lsl #31
 		ldr1b	r1, r3, ne, abort=21f
 		ldr1b	r1, r4, cs, abort=21f
@@ -169,7 +158,7 @@
 		str1b	r0, r4, cs, abort=21f
 		str1b	r0, ip, cs, abort=21f
 
-		exit	r4, pc
+		exit	r4, UNWIND(fpreg,) pc
 
 9:		rsb	ip, ip, #4
 		cmp	ip, #2
@@ -189,13 +178,10 @@
 		ldr1w	r1, lr, abort=21f
 		beq	17f
 		bgt	18f
-	UNWIND(	.fnend				)
 
 
 		.macro	forward_copy_shift pull push
 
-	UNWIND(	.fnstart			)
-		usave	r4, lr			  @ still in first stmdb block
 		subs	r2, r2, #28
 		blt	14f
 
@@ -205,12 +191,8 @@
 	CALGN(	subcc	r2, r2, ip		)
 	CALGN(	bcc	15f			)
 
-11:		stmfd	sp!, {r5 - r9}
-	UNWIND(	.fnend				)
+11:		stmfd	sp!, {r5, r6, r8 - r10}
 
-	UNWIND(	.fnstart			)
-		usave	r4, lr
-	UNWIND(	.save	{r5 - r9}		) @ in new second stmfd block
 	PLD(	pld	[r1, #0]		)
 	PLD(	subs	r2, r2, #96		)
 	PLD(	pld	[r1, #28]		)
@@ -219,35 +201,32 @@
 	PLD(	pld	[r1, #92]		)
 
 12:	PLD(	pld	[r1, #124]		)
-13:		ldr4w	r1, r4, r5, r6, r7, abort=19f
+13:		ldr4w	r1, r4, r5, r6, r8, abort=19f
 		mov	r3, lr, lspull #\pull
 		subs	r2, r2, #32
-		ldr4w	r1, r8, r9, ip, lr, abort=19f
+		ldr4w	r1, r9, r10, ip, lr, abort=19f
 		orr	r3, r3, r4, lspush #\push
 		mov	r4, r4, lspull #\pull
 		orr	r4, r4, r5, lspush #\push
 		mov	r5, r5, lspull #\pull
 		orr	r5, r5, r6, lspush #\push
 		mov	r6, r6, lspull #\pull
-		orr	r6, r6, r7, lspush #\push
-		mov	r7, r7, lspull #\pull
-		orr	r7, r7, r8, lspush #\push
+		orr	r6, r6, r8, lspush #\push
 		mov	r8, r8, lspull #\pull
 		orr	r8, r8, r9, lspush #\push
 		mov	r9, r9, lspull #\pull
-		orr	r9, r9, ip, lspush #\push
+		orr	r9, r9, r10, lspush #\push
+		mov	r10, r10, lspull #\pull
+		orr	r10, r10, ip, lspush #\push
 		mov	ip, ip, lspull #\pull
 		orr	ip, ip, lr, lspush #\push
-		str8w	r0, r3, r4, r5, r6, r7, r8, r9, ip, abort=19f
+		str8w	r0, r3, r4, r5, r6, r8, r9, r10, ip, abort=19f
 		bge	12b
 	PLD(	cmn	r2, #96			)
 	PLD(	bge	13b			)
 
-		ldmfd	sp!, {r5 - r9}
-	UNWIND(	.fnend				) @ end of the second stmfd block
+		ldmfd	sp!, {r5, r6, r8 - r10}
 
-	UNWIND(	.fnstart			)
-		usave	r4, lr			  @ still in first stmdb block
 14:		ands	ip, r2, #28
 		beq	16f
 
@@ -262,7 +241,6 @@
 
 16:		sub	r1, r1, #(\push / 8)
 		b	8b
-	UNWIND(	.fnend				)
 
 		.endm
 
@@ -273,6 +251,7 @@
 
 18:		forward_copy_shift	pull=24	push=8
 
+	UNWIND(	.fnend				)
 
 /*
  * Abort preamble and completion macros.
@@ -282,13 +261,13 @@
  */
 
 	.macro	copy_abort_preamble
-19:	ldmfd	sp!, {r5 - r9}
+19:	ldmfd	sp!, {r5, r6, r8 - r10}
 	b	21f
-20:	ldmfd	sp!, {r5 - r8}
+20:	ldmfd	sp!, {r5, r6, r8, r9}
 21:
 	.endm
 
 	.macro	copy_abort_end
-	ldmfd	sp!, {r4, pc}
+	ldmfd	sp!, {r4, UNWIND(fpreg,) pc}
 	.endm
 
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index ebfe4cb3d912..fac49e57cc0b 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -90,18 +90,15 @@
 	strusr	\reg, \ptr, 1, \cond, abort=\abort
 	.endm
 
-	.macro enter reg1 reg2
+	.macro enter regs:vararg
 	mov	r3, #0
-	stmdb	sp!, {r0, r2, r3, \reg1, \reg2}
+UNWIND( .save	{r0, r2, r3, \regs}		)
+	stmdb	sp!, {r0, r2, r3, \regs}
 	.endm
 
-	.macro usave reg1 reg2
-	UNWIND(	.save {r0, r2, r3, \reg1, \reg2}	)
-	.endm
-
-	.macro exit reg1 reg2
+	.macro exit regs:vararg
 	add	sp, sp, #8
-	ldmfd	sp!, {r0, \reg1, \reg2}
+	ldmfd	sp!, {r0, \regs}
 	.endm
 
 	.text
@@ -109,8 +106,7 @@
 ENTRY(__copy_to_user_std)
 WEAK(arm_copy_to_user)
 #ifdef CONFIG_CPU_SPECTRE
-	get_thread_info r3
-	ldr	r3, [r3, #TI_ADDR_LIMIT]
+	ldr	r3, =TASK_SIZE
 	uaccess_mask_range_ptr r0, r2, r3, ip
 #endif
 
diff --git a/arch/arm/lib/delay-loop.S b/arch/arm/lib/delay-loop.S
index 3ccade0f8130..3ac05177d097 100644
--- a/arch/arm/lib/delay-loop.S
+++ b/arch/arm/lib/delay-loop.S
@@ -8,6 +8,10 @@
 #include <asm/assembler.h>
 #include <asm/delay.h>
 
+#ifdef CONFIG_ARCH_RPC
+		.arch	armv4
+#endif
+
 		.text
 
 .LC0:		.word	loops_per_jiffy
diff --git a/arch/arm/lib/error-inject.c b/arch/arm/lib/error-inject.c
new file mode 100644
index 000000000000..5a5b405792ba
--- /dev/null
+++ b/arch/arm/lib/error-inject.c
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/error-injection.h>
+#include <linux/kprobes.h>
+
+void override_function_with_return(struct pt_regs *regs)
+{
+	instruction_pointer_set(regs, regs->ARM_lr);
+}
+NOKPROBE_SYMBOL(override_function_with_return);
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index b5e8b9ae4c7d..b7ac2d3c0748 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -12,182 +12,128 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
                 .text
 
-/*
- * Purpose  : Find a 'zero' bit
- * Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit);
- */
-ENTRY(_find_first_zero_bit_le)
-		teq	r1, #0	
-		beq	3f
-		mov	r2, #0
-1:
- ARM(		ldrb	r3, [r0, r2, lsr #3]	)
- THUMB(		lsr	r3, r2, #3		)
- THUMB(		ldrb	r3, [r0, r3]		)
-		eors	r3, r3, #0xff		@ invert bits
-		bne	.L_found		@ any now set - found zero bit
-		add	r2, r2, #8		@ next bit pointer
-2:		cmp	r2, r1			@ any more?
-		blo	1b
-3:		mov	r0, r1			@ no free bits
-		ret	lr
-ENDPROC(_find_first_zero_bit_le)
+#ifdef __ARMEB__
+#define SWAB_ENDIAN le
+#else
+#define SWAB_ENDIAN be
+#endif
 
-/*
- * Purpose  : Find next 'zero' bit
- * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
- */
-ENTRY(_find_next_zero_bit_le)
+		.macro	find_first, endian, set, name
+ENTRY(_find_first_\name\()bit_\endian)
+	UNWIND(	.fnstart)
 		teq	r1, #0
-		beq	3b
-		ands	ip, r2, #7
-		beq	1b			@ If new byte, goto old routine
- ARM(		ldrb	r3, [r0, r2, lsr #3]	)
- THUMB(		lsr	r3, r2, #3		)
- THUMB(		ldrb	r3, [r0, r3]		)
-		eor	r3, r3, #0xff		@ now looking for a 1 bit
-		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.L_found
-		orr	r2, r2, #7		@ if zero, then no bits here
-		add	r2, r2, #1		@ align bit pointer
-		b	2b			@ loop for next bit
-ENDPROC(_find_next_zero_bit_le)
-
-/*
- * Purpose  : Find a 'one' bit
- * Prototype: int find_first_bit(const unsigned long *addr, unsigned int maxbit);
- */
-ENTRY(_find_first_bit_le)
-		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
-1:
- ARM(		ldrb	r3, [r0, r2, lsr #3]	)
- THUMB(		lsr	r3, r2, #3		)
- THUMB(		ldrb	r3, [r0, r3]		)
-		movs	r3, r3
-		bne	.L_found		@ any now set - found zero bit
-		add	r2, r2, #8		@ next bit pointer
+1:		ldr	r3, [r0], #4
+		.ifeq \set
+		mvns	r3, r3			@ invert/test bits
+		.else
+		movs	r3, r3			@ test bits
+		.endif
+		.ifc \endian, SWAB_ENDIAN
+		bne	.L_found_swab
+		.else
+		bne	.L_found		@ found the bit?
+		.endif
+		add	r2, r2, #32		@ next index
 2:		cmp	r2, r1			@ any more?
 		blo	1b
-3:		mov	r0, r1			@ no free bits
+3:		mov	r0, r1			@ no more bits
 		ret	lr
-ENDPROC(_find_first_bit_le)
+	UNWIND(	.fnend)
+ENDPROC(_find_first_\name\()bit_\endian)
+		.endm
 
-/*
- * Purpose  : Find next 'one' bit
- * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
- */
-ENTRY(_find_next_bit_le)
-		teq	r1, #0
-		beq	3b
-		ands	ip, r2, #7
-		beq	1b			@ If new byte, goto old routine
- ARM(		ldrb	r3, [r0, r2, lsr #3]	)
- THUMB(		lsr	r3, r2, #3		)
- THUMB(		ldrb	r3, [r0, r3]		)
+		.macro	find_next, endian, set, name
+ENTRY(_find_next_\name\()bit_\endian)
+	UNWIND(	.fnstart)
+		cmp	r2, r1
+		bhs	3b
+		mov	ip, r2, lsr #5		@ word index
+		add	r0, r0, ip, lsl #2
+		ands	ip, r2, #31		@ bit position
+		beq	1b
+		ldr	r3, [r0], #4
+		.ifeq \set
+		mvn	r3, r3			@ invert bits
+		.endif
+		.ifc \endian, SWAB_ENDIAN
+		rev_l	r3, ip
+		.if	.Lrev_l_uses_tmp
+		@ we need to recompute ip because rev_l will have overwritten
+		@ it.
+		and	ip, r2, #31		@ bit position
+		.endif
+		.endif
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
-		orr	r2, r2, #7		@ if zero, then no bits here
+		orr	r2, r2, #31		@ no zero bits
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(_find_next_bit_le)
+	UNWIND(	.fnend)
+ENDPROC(_find_next_\name\()bit_\endian)
+		.endm
 
-#ifdef __ARMEB__
+		.macro	find_bit, endian, set, name
+		find_first \endian, \set, \name
+		find_next  \endian, \set, \name
+		.endm
 
-ENTRY(_find_first_zero_bit_be)
-		teq	r1, #0
-		beq	3f
-		mov	r2, #0
-1:		eor	r3, r2, #0x18		@ big endian byte ordering
- ARM(		ldrb	r3, [r0, r3, lsr #3]	)
- THUMB(		lsr	r3, #3			)
- THUMB(		ldrb	r3, [r0, r3]		)
-		eors	r3, r3, #0xff		@ invert bits
-		bne	.L_found		@ any now set - found zero bit
-		add	r2, r2, #8		@ next bit pointer
-2:		cmp	r2, r1			@ any more?
-		blo	1b
-3:		mov	r0, r1			@ no free bits
-		ret	lr
-ENDPROC(_find_first_zero_bit_be)
+/* _find_first_zero_bit_le and _find_next_zero_bit_le */
+		find_bit le, 0, zero_
 
-ENTRY(_find_next_zero_bit_be)
-		teq	r1, #0
-		beq	3b
-		ands	ip, r2, #7
-		beq	1b			@ If new byte, goto old routine
-		eor	r3, r2, #0x18		@ big endian byte ordering
- ARM(		ldrb	r3, [r0, r3, lsr #3]	)
- THUMB(		lsr	r3, #3			)
- THUMB(		ldrb	r3, [r0, r3]		)
-		eor	r3, r3, #0xff		@ now looking for a 1 bit
-		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.L_found
-		orr	r2, r2, #7		@ if zero, then no bits here
-		add	r2, r2, #1		@ align bit pointer
-		b	2b			@ loop for next bit
-ENDPROC(_find_next_zero_bit_be)
+/* _find_first_bit_le and _find_next_bit_le */
+		find_bit le, 1
 
-ENTRY(_find_first_bit_be)
-		teq	r1, #0
-		beq	3f
-		mov	r2, #0
-1:		eor	r3, r2, #0x18		@ big endian byte ordering
- ARM(		ldrb	r3, [r0, r3, lsr #3]	)
- THUMB(		lsr	r3, #3			)
- THUMB(		ldrb	r3, [r0, r3]		)
-		movs	r3, r3
-		bne	.L_found		@ any now set - found zero bit
-		add	r2, r2, #8		@ next bit pointer
-2:		cmp	r2, r1			@ any more?
-		blo	1b
-3:		mov	r0, r1			@ no free bits
-		ret	lr
-ENDPROC(_find_first_bit_be)
+#ifdef __ARMEB__
 
-ENTRY(_find_next_bit_be)
-		teq	r1, #0
-		beq	3b
-		ands	ip, r2, #7
-		beq	1b			@ If new byte, goto old routine
-		eor	r3, r2, #0x18		@ big endian byte ordering
- ARM(		ldrb	r3, [r0, r3, lsr #3]	)
- THUMB(		lsr	r3, #3			)
- THUMB(		ldrb	r3, [r0, r3]		)
-		movs	r3, r3, lsr ip		@ shift off unused bits
-		bne	.L_found
-		orr	r2, r2, #7		@ if zero, then no bits here
-		add	r2, r2, #1		@ align bit pointer
-		b	2b			@ loop for next bit
-ENDPROC(_find_next_bit_be)
+/* _find_first_zero_bit_be and _find_next_zero_bit_be */
+		find_bit be, 0, zero_
+
+/* _find_first_bit_be and _find_next_bit_be */
+		find_bit be, 1
 
 #endif
 
 /*
  * One or more bits in the LSB of r3 are assumed to be set.
  */
+.L_found_swab:
+	UNWIND(	.fnstart)
+		rev_l	r3, ip
 .L_found:
-#if __LINUX_ARM_ARCH__ >= 5
+#if __LINUX_ARM_ARCH__ >= 7
+		rbit	r3, r3			@ reverse bits
+		clz	r3, r3			@ count high zero bits
+		add	r0, r2, r3		@ add offset of first set bit
+#elif __LINUX_ARM_ARCH__ >= 5
 		rsb	r0, r3, #0
-		and	r3, r3, r0
-		clz	r3, r3
-		rsb	r3, r3, #31
-		add	r0, r2, r3
+		and	r3, r3, r0		@ mask out lowest bit set
+		clz	r3, r3			@ count high zero bits
+		rsb	r3, r3, #31		@ offset of first set bit
+		add	r0, r2, r3		@ add offset of first set bit
 #else
-		tst	r3, #0x0f
+		mov	ip, #~0
+		tst	r3, ip, lsr #16		@ test bits 0-15
+		addeq	r2, r2, #16
+		moveq	r3, r3, lsr #16
+		tst	r3, #0x00ff
+		addeq	r2, r2, #8
+		moveq	r3, r3, lsr #8
+		tst	r3, #0x000f
 		addeq	r2, r2, #4
-		movne	r3, r3, lsl #4
-		tst	r3, #0x30
+		moveq	r3, r3, lsr #4
+		tst	r3, #0x0003
 		addeq	r2, r2, #2
-		movne	r3, r3, lsl #2
-		tst	r3, #0x40
+		moveq	r3, r3, lsr #2
+		tst	r3, #0x0001
 		addeq	r2, r2, #1
 		mov	r0, r2
 #endif
 		cmp	r1, r0			@ Clamp to maxbit
 		movlo	r0, r1
 		ret	lr
-
+	UNWIND(	.fnend)
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index e4caf48c089f..90f2b645aa0d 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -42,16 +42,13 @@
 	strb\cond \reg, [\ptr], #1
 	.endm
 
-	.macro enter reg1 reg2
-	stmdb sp!, {r0, \reg1, \reg2}
+	.macro enter regs:vararg
+UNWIND( .save	{r0, \regs}		)
+	stmdb sp!, {r0, \regs}
 	.endm
 
-	.macro usave reg1 reg2
-	UNWIND(	.save	{r0, \reg1, \reg2}	)
-	.endm
-
-	.macro exit reg1 reg2
-	ldmfd sp!, {r0, \reg1, \reg2}
+	.macro exit regs:vararg
+	ldmfd sp!, {r0, \regs}
 	.endm
 
 	.text
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index 6fecc12a1f51..6410554039fd 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -31,12 +31,13 @@ WEAK(memmove)
 		subs	ip, r0, r1
 		cmphi	r2, ip
 		bls	__memcpy
-
-		stmfd	sp!, {r0, r4, lr}
 	UNWIND(	.fnend				)
 
 	UNWIND(	.fnstart			)
-	UNWIND(	.save	{r0, r4, lr}		) @ in first stmfd block
+	UNWIND(	.save	{r0, r4, fpreg, lr}	)
+		stmfd	sp!, {r0, r4, UNWIND(fpreg,) lr}
+	UNWIND(	.setfp	fpreg, sp		)
+	UNWIND(	mov	fpreg, sp		)
 		add	r1, r1, r2
 		add	r0, r0, r2
 		subs	r2, r2, #4
@@ -48,12 +49,7 @@ WEAK(memmove)
 		bne	10f
 
 1:		subs	r2, r2, #(28)
-		stmfd	sp!, {r5 - r8}
-	UNWIND(	.fnend				)
-
-	UNWIND(	.fnstart			)
-	UNWIND(	.save	{r0, r4, lr}		)
-	UNWIND(	.save	{r5 - r8}		) @ in second stmfd block
+		stmfd	sp!, {r5, r6, r8, r9}
 		blt	5f
 
 	CALGN(	ands	ip, r0, #31		)
@@ -72,9 +68,9 @@ WEAK(memmove)
 	PLD(	pld	[r1, #-96]		)
 
 3:	PLD(	pld	[r1, #-128]		)
-4:		ldmdb	r1!, {r3, r4, r5, r6, r7, r8, ip, lr}
+4:		ldmdb	r1!, {r3, r4, r5, r6, r8, r9, ip, lr}
 		subs	r2, r2, #32
-		stmdb	r0!, {r3, r4, r5, r6, r7, r8, ip, lr}
+		stmdb	r0!, {r3, r4, r5, r6, r8, r9, ip, lr}
 		bge	3b
 	PLD(	cmn	r2, #96			)
 	PLD(	bge	4b			)
@@ -88,8 +84,8 @@ WEAK(memmove)
 		W(ldr)	r4, [r1, #-4]!
 		W(ldr)	r5, [r1, #-4]!
 		W(ldr)	r6, [r1, #-4]!
-		W(ldr)	r7, [r1, #-4]!
 		W(ldr)	r8, [r1, #-4]!
+		W(ldr)	r9, [r1, #-4]!
 		W(ldr)	lr, [r1, #-4]!
 
 		add	pc, pc, ip
@@ -99,17 +95,13 @@ WEAK(memmove)
 		W(str)	r4, [r0, #-4]!
 		W(str)	r5, [r0, #-4]!
 		W(str)	r6, [r0, #-4]!
-		W(str)	r7, [r0, #-4]!
 		W(str)	r8, [r0, #-4]!
+		W(str)	r9, [r0, #-4]!
 		W(str)	lr, [r0, #-4]!
 
 	CALGN(	bcs	2b			)
 
-7:		ldmfd	sp!, {r5 - r8}
-	UNWIND(	.fnend				) @ end of second stmfd block
-
-	UNWIND(	.fnstart			)
-	UNWIND(	.save	{r0, r4, lr}		) @ still in first stmfd block
+7:		ldmfd	sp!, {r5, r6, r8, r9}
 
 8:		movs	r2, r2, lsl #31
 		ldrbne	r3, [r1, #-1]!
@@ -118,7 +110,7 @@ WEAK(memmove)
 		strbne	r3, [r0, #-1]!
 		strbcs	r4, [r0, #-1]!
 		strbcs	ip, [r0, #-1]
-		ldmfd	sp!, {r0, r4, pc}
+		ldmfd	sp!, {r0, r4, UNWIND(fpreg,) pc}
 
 9:		cmp	ip, #2
 		ldrbgt	r3, [r1, #-1]!
@@ -137,13 +129,10 @@ WEAK(memmove)
 		ldr	r3, [r1, #0]
 		beq	17f
 		blt	18f
-	UNWIND(	.fnend				)
 
 
 		.macro	backward_copy_shift push pull
 
-	UNWIND(	.fnstart			)
-	UNWIND(	.save	{r0, r4, lr}		) @ still in first stmfd block
 		subs	r2, r2, #28
 		blt	14f
 
@@ -152,12 +141,7 @@ WEAK(memmove)
 	CALGN(	subcc	r2, r2, ip		)
 	CALGN(	bcc	15f			)
 
-11:		stmfd	sp!, {r5 - r9}
-	UNWIND(	.fnend				)
-
-	UNWIND(	.fnstart			)
-	UNWIND(	.save	{r0, r4, lr}		)
-	UNWIND(	.save	{r5 - r9}		) @ in new second stmfd block
+11:		stmfd	sp!, {r5, r6, r8 - r10}
 
 	PLD(	pld	[r1, #-4]		)
 	PLD(	subs	r2, r2, #96		)
@@ -167,35 +151,31 @@ WEAK(memmove)
 	PLD(	pld	[r1, #-96]		)
 
 12:	PLD(	pld	[r1, #-128]		)
-13:		ldmdb   r1!, {r7, r8, r9, ip}
+13:		ldmdb   r1!, {r8, r9, r10, ip}
 		mov     lr, r3, lspush #\push
 		subs    r2, r2, #32
 		ldmdb   r1!, {r3, r4, r5, r6}
 		orr     lr, lr, ip, lspull #\pull
 		mov     ip, ip, lspush #\push
-		orr     ip, ip, r9, lspull #\pull
+		orr     ip, ip, r10, lspull #\pull
+		mov     r10, r10, lspush #\push
+		orr     r10, r10, r9, lspull #\pull
 		mov     r9, r9, lspush #\push
 		orr     r9, r9, r8, lspull #\pull
 		mov     r8, r8, lspush #\push
-		orr     r8, r8, r7, lspull #\pull
-		mov     r7, r7, lspush #\push
-		orr     r7, r7, r6, lspull #\pull
+		orr     r8, r8, r6, lspull #\pull
 		mov     r6, r6, lspush #\push
 		orr     r6, r6, r5, lspull #\pull
 		mov     r5, r5, lspush #\push
 		orr     r5, r5, r4, lspull #\pull
 		mov     r4, r4, lspush #\push
 		orr     r4, r4, r3, lspull #\pull
-		stmdb   r0!, {r4 - r9, ip, lr}
+		stmdb   r0!, {r4 - r6, r8 - r10, ip, lr}
 		bge	12b
 	PLD(	cmn	r2, #96			)
 	PLD(	bge	13b			)
 
-		ldmfd	sp!, {r5 - r9}
-	UNWIND(	.fnend				) @ end of the second stmfd block
-
-	UNWIND(	.fnstart			)
-	UNWIND(	.save {r0, r4, lr}		) @ still in first stmfd block
+		ldmfd	sp!, {r5, r6, r8 - r10}
 
 14:		ands	ip, r2, #28
 		beq	16f
@@ -211,7 +191,6 @@ WEAK(memmove)
 
 16:		add	r1, r1, #(\pull / 8)
 		b	8b
-	UNWIND(	.fnend				)
 
 		.endm
 
@@ -222,5 +201,6 @@ WEAK(memmove)
 
 18:		backward_copy_shift	push=24	pull=8
 
+	UNWIND(	.fnend				)
 ENDPROC(memmove)
 ENDPROC(__memmove)
diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S
index 9817cb258c1a..d71ab61430b2 100644
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@@ -28,16 +28,16 @@ UNWIND( .fnstart         )
 	mov	r3, r1
 7:	cmp	r2, #16
 	blt	4f
+UNWIND( .fnend              )
 
 #if ! CALGN(1)+0
 
 /*
  * We need 2 extra registers for this loop - use r8 and the LR
  */
-	stmfd	sp!, {r8, lr}
-UNWIND( .fnend              )
 UNWIND( .fnstart            )
 UNWIND( .save {r8, lr}      )
+	stmfd	sp!, {r8, lr}
 	mov	r8, r1
 	mov	lr, r3
 
@@ -66,10 +66,9 @@ UNWIND( .fnend              )
  * whole cache lines at once.
  */
 
-	stmfd	sp!, {r4-r8, lr}
-UNWIND( .fnend                 )
 UNWIND( .fnstart               )
 UNWIND( .save {r4-r8, lr}      )
+	stmfd	sp!, {r4-r8, lr}
 	mov	r4, r1
 	mov	r5, r3
 	mov	r6, r1
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
index 106f83a5ea6d..e4c2677cc1e9 100644
--- a/arch/arm/lib/uaccess_with_memcpy.c
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -92,11 +92,6 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 	unsigned long ua_flags;
 	int atomic;
 
-	if (uaccess_kernel()) {
-		memcpy((void *)to, from, n);
-		return 0;
-	}
-
 	/* the mmap semaphore is taken only if not in an atomic context */
 	atomic = faulthandler_disabled();
 
@@ -121,7 +116,7 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 			tocopy = n;
 
 		ua_flags = uaccess_save_and_enable();
-		memcpy((void *)to, from, tocopy);
+		__memcpy((void *)to, from, tocopy);
 		uaccess_restore(ua_flags);
 		to += tocopy;
 		from += tocopy;
@@ -165,11 +160,6 @@ __clear_user_memset(void __user *addr, unsigned long n)
 {
 	unsigned long ua_flags;
 
-	if (uaccess_kernel()) {
-		memset((void *)addr, 0, n);
-		return 0;
-	}
-
 	mmap_read_lock(current->mm);
 	while (n) {
 		pte_t *pte;
@@ -188,7 +178,7 @@ __clear_user_memset(void __user *addr, unsigned long n)
 			tocopy = n;
 
 		ua_flags = uaccess_save_and_enable();
-		memset((void *)addr, 0, tocopy);
+		__memset((void *)addr, 0, tocopy);
 		uaccess_restore(ua_flags);
 		addr += tocopy;
 		n -= tocopy;
@@ -247,7 +237,7 @@ static int __init test_size_treshold(void)
 	if (!dst_page)
 		goto no_dst;
 	kernel_ptr = page_address(src_page);
-	user_ptr = vmap(&dst_page, 1, VM_IOREMAP, __pgprot(__P010));
+	user_ptr = vmap(&dst_page, 1, VM_IOREMAP, __pgprot(__PAGE_COPY));
 	if (!user_ptr)
 		goto no_vmap;
 
diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c
index b99dd8e1c93f..522510baed49 100644
--- a/arch/arm/lib/xor-neon.c
+++ b/arch/arm/lib/xor-neon.c
@@ -17,17 +17,11 @@ MODULE_LICENSE("GPL");
 /*
  * Pull in the reference implementations while instructing GCC (through
  * -ftree-vectorize) to attempt to exploit implicit parallelism and emit
- * NEON instructions.
+ * NEON instructions. Clang does this by default at O2 so no pragma is
+ * needed.
  */
-#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#ifdef CONFIG_CC_IS_GCC
 #pragma GCC optimize "tree-vectorize"
-#else
-/*
- * While older versions of GCC do not generate incorrect code, they fail to
- * recognize the parallel nature of these functions, and emit plain ARM code,
- * which is known to be slower than the optimized ARM code in asm-arm/xor.h.
- */
-#warning This code requires at least version 4.6 of GCC
 #endif
 
 #pragma GCC diagnostic ignored "-Wunused-variable"
diff --git a/arch/arm/mach-actions/platsmp.c b/arch/arm/mach-actions/platsmp.c
index f26618b43514..7b208e96fbb6 100644
--- a/arch/arm/mach-actions/platsmp.c
+++ b/arch/arm/mach-actions/platsmp.c
@@ -20,6 +20,8 @@
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
+#include <trace/events/ipi.h>
+
 #define OWL_CPU1_ADDR	0x50
 #define OWL_CPU1_FLAG	0x5c
 
diff --git a/arch/arm/mach-airoha/Makefile b/arch/arm/mach-airoha/Makefile
new file mode 100644
index 000000000000..a5857d0d02eb
--- /dev/null
+++ b/arch/arm/mach-airoha/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y			+= airoha.o
diff --git a/arch/arm/mach-airoha/airoha.c b/arch/arm/mach-airoha/airoha.c
new file mode 100644
index 000000000000..ea23b5abb478
--- /dev/null
+++ b/arch/arm/mach-airoha/airoha.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree support for Airoha SoCs
+ *
+ * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
+ */
+#include <asm/mach/arch.h>
+
+static const char * const airoha_board_dt_compat[] = {
+	"airoha,en7523",
+	NULL,
+};
+
+DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
+	.dt_compat	= airoha_board_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-asm9260/Kconfig b/arch/arm/mach-asm9260/Kconfig
index a2e1d0aaf252..74e0f61c74c8 100644
--- a/arch/arm/mach-asm9260/Kconfig
+++ b/arch/arm/mach-asm9260/Kconfig
@@ -2,6 +2,7 @@
 config MACH_ASM9260
 	bool "Alphascale ASM9260"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select CPU_ARM926T
 	select ASM9260_TIMER
 	help
diff --git a/arch/arm/mach-aspeed/Kconfig b/arch/arm/mach-aspeed/Kconfig
index ea96d11b8502..080019aa6fcd 100644
--- a/arch/arm/mach-aspeed/Kconfig
+++ b/arch/arm/mach-aspeed/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_ASPEED
 	bool "Aspeed BMC architectures"
-	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
+	depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V6 || ARCH_MULTI_V7
 	select SRAM
 	select WATCHDOG
 	select ASPEED_WATCHDOG
@@ -19,9 +19,9 @@ config MACH_ASPEED_G4
 	select PINCTRL_ASPEED_G4
 	select FTTMR010_TIMER
 	help
-	 Say yes if you intend to run on an Aspeed ast2400 or similar
-	 fourth generation BMCs, such as those used by OpenPower Power8
-	 systems.
+	  Say yes if you intend to run on an Aspeed ast2400 or similar
+	  fourth generation BMCs, such as those used by OpenPower Power8
+	  systems.
 
 config MACH_ASPEED_G5
 	bool "Aspeed SoC 5th Generation"
@@ -29,8 +29,8 @@ config MACH_ASPEED_G5
 	select PINCTRL_ASPEED_G5
 	select FTTMR010_TIMER
 	help
-	 Say yes if you intend to run on an Aspeed ast2500 or similar
-	 fifth generation Aspeed BMCs.
+	  Say yes if you intend to run on an Aspeed ast2500 or similar
+	  fifth generation Aspeed BMCs.
 
 config MACH_ASPEED_G6
 	bool "Aspeed SoC 6th Generation"
@@ -40,7 +40,7 @@ config MACH_ASPEED_G6
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
 	help
-	 Say yes if you intend to run on an Aspeed ast2600 or similar
-	 sixth generation Aspeed BMCs.
+	  Say yes if you intend to run on an Aspeed ast2600 or similar
+	  sixth generation Aspeed BMCs.
 
 endif
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index ccd7e80ce943..3dd9e718661b 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,7 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_AT91
 	bool "AT91/Microchip SoCs"
-	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
+	depends on (CPU_LITTLE_ENDIAN && (ARCH_MULTI_V4T || ARCH_MULTI_V5)) || \
+		ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
 	select ARM_CPU_SUSPEND if PM && ARCH_MULTI_V7
 	select COMMON_CLK_AT91
 	select GPIOLIB
@@ -57,6 +58,26 @@ config SOC_SAMA5D4
 	help
 	  Select this if you are using one of Microchip's SAMA5D4 family SoC.
 
+config SOC_SAMA7G5
+	bool "SAMA7G5 family"
+	depends on ARCH_MULTI_V7
+	select HAVE_AT91_GENERATED_CLK
+	select HAVE_AT91_SAM9X60_PLL
+	select HAVE_AT91_UTMI
+	select PM_OPP
+	select SOC_SAMA7
+	help
+	  Select this if you are using one of Microchip's SAMA7G5 family SoC.
+
+config SOC_LAN966
+	bool "ARMv7 based Microchip LAN966 SoC family"
+	depends on ARCH_MULTI_V7
+	select DW_APB_TIMER_OF
+	select ARM_GIC
+	select MEMORY
+	help
+	  This enables support for ARMv7 based Microchip LAN966 SoC family.
+
 config SOC_AT91RM9200
 	bool "AT91RM9200"
 	depends on ARCH_MULTI_V4T
@@ -145,6 +166,15 @@ config ATMEL_CLOCKSOURCE_TCB
 	  to make a single 32-bit timer.
 	  It can also be used as a clock event device supporting oneshot mode.
 
+config MICROCHIP_CLOCKSOURCE_PIT64B
+	bool "64-bit Periodic Interval Timer (PIT64B) support"
+	default SOC_SAM9X60 || SOC_SAMA7
+	select MICROCHIP_PIT64B
+	help
+	  Select this to get a high resolution clockevent (SAM9X60) or
+	  clocksource and clockevent (SAMA7G5) based on Microchip 64-bit
+	  Periodic Interval Timer.
+
 config HAVE_AT91_UTMI
 	bool
 
@@ -191,4 +221,21 @@ config SOC_SAMA5
 config ATMEL_PM
 	bool
 
+config ATMEL_SECURE_PM
+	bool "Atmel Secure PM support"
+	depends on SOC_SAMA5D2 && ATMEL_PM
+	select ARM_PSCI
+	help
+	  When running under a TEE, the suspend mode must be requested to be set
+	  at TEE level. When enable, this option will use secure monitor calls
+	  to set the suspend level. PSCI is then used to enter suspend.
+
+config SOC_SAMA7
+	bool
+	select ARM_GIC
+	select ATMEL_PM if PM
+	select ATMEL_SDRAMC
+	select MEMORY
+	select SOC_SAM_V7
+	select SRAM if PM
 endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index f565490f1b70..794bd12ab0a8 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -7,15 +7,13 @@
 obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam9.o
 obj-$(CONFIG_SOC_SAM9X60)	+= sam9x60.o
-obj-$(CONFIG_SOC_SAMA5)		+= sama5.o
+obj-$(CONFIG_SOC_SAMA5)		+= sama5.o sam_secure.o
+obj-$(CONFIG_SOC_SAMA7)		+= sama7.o
 obj-$(CONFIG_SOC_SAMV7)		+= samv7.o
 
 # Power Management
 obj-$(CONFIG_ATMEL_PM)		+= pm.o pm_suspend.o
 
-ifeq ($(CONFIG_CPU_V7),y)
-AFLAGS_pm_suspend.o := -march=armv7-a
-endif
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
 endif
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
deleted file mode 100644
index 5dde7328a7a9..000000000000
--- a/arch/arm/mach-at91/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Empty file waiting for deletion once Makefile.boot isn't needed any more.
-# Patch waits for application at
-# https://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 0a4cdcb4985b..0c3960a8b3eb 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -14,12 +14,14 @@ extern void __init at91sam9_pm_init(void);
 extern void __init sam9x60_pm_init(void);
 extern void __init sama5_pm_init(void);
 extern void __init sama5d2_pm_init(void);
+extern void __init sama7_pm_init(void);
 #else
 static inline void __init at91rm9200_pm_init(void) { }
 static inline void __init at91sam9_pm_init(void) { }
 static inline void __init sam9x60_pm_init(void) { }
 static inline void __init sama5_pm_init(void) { }
 static inline void __init sama5d2_pm_init(void) { }
+static inline void __init sama7_pm_init(void) { }
 #endif
 
 #endif /* _AT91_GENERIC_H */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 120f9aa6fff3..60dc56d8acfb 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -10,10 +10,12 @@
 #include <linux/io.h>
 #include <linux/of_address.h>
 #include <linux/of.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <linux/parser.h>
 #include <linux/suspend.h>
 
+#include <linux/clk.h>
 #include <linux/clk/at91_pmc.h>
 #include <linux/platform_data/atmel.h>
 
@@ -24,25 +26,126 @@
 
 #include "generic.h"
 #include "pm.h"
+#include "sam_secure.h"
+
+#define BACKUP_DDR_PHY_CALIBRATION	(9)
+
+/**
+ * struct at91_pm_bu - AT91 power management backup unit data structure
+ * @suspended: true if suspended to backup mode
+ * @reserved: reserved
+ * @canary: canary data for memory checking after exit from backup mode
+ * @resume: resume API
+ * @ddr_phy_calibration: DDR PHY calibration data: ZQ0CR0, first 8 words
+ * of the memory
+ */
+struct at91_pm_bu {
+	int suspended;
+	unsigned long reserved;
+	phys_addr_t canary;
+	phys_addr_t resume;
+	unsigned long ddr_phy_calibration[BACKUP_DDR_PHY_CALIBRATION];
+};
 
-/*
- * FIXME: this is needed to communicate between the pinctrl driver and
- * the PM implementation in the machine. Possibly part of the PM
- * implementation should be moved down into the pinctrl driver and get
- * called as part of the generic suspend/resume path.
+/**
+ * struct at91_pm_sfrbu_regs - registers mapping for SFRBU
+ * @pswbu: power switch BU control registers
  */
-#ifdef CONFIG_PINCTRL_AT91
-extern void at91_pinctrl_gpio_suspend(void);
-extern void at91_pinctrl_gpio_resume(void);
-#endif
+struct at91_pm_sfrbu_regs {
+	struct {
+		u32 key;
+		u32 ctrl;
+		u32 state;
+		u32 softsw;
+	} pswbu;
+};
 
+/**
+ * enum at91_pm_eth_clk - Ethernet clock indexes
+ * @AT91_PM_ETH_PCLK: pclk index
+ * @AT91_PM_ETH_HCLK: hclk index
+ * @AT91_PM_ETH_MAX_CLK: max index
+ */
+enum at91_pm_eth_clk {
+	AT91_PM_ETH_PCLK,
+	AT91_PM_ETH_HCLK,
+	AT91_PM_ETH_MAX_CLK,
+};
+
+/**
+ * enum at91_pm_eth - Ethernet controller indexes
+ * @AT91_PM_G_ETH: gigabit Ethernet controller index
+ * @AT91_PM_E_ETH: megabit Ethernet controller index
+ * @AT91_PM_MAX_ETH: max index
+ */
+enum at91_pm_eth {
+	AT91_PM_G_ETH,
+	AT91_PM_E_ETH,
+	AT91_PM_MAX_ETH,
+};
+
+/**
+ * struct at91_pm_quirk_eth - AT91 PM Ethernet quirks
+ * @dev: Ethernet device
+ * @np: Ethernet device node
+ * @clks: Ethernet clocks
+ * @modes: power management mode that this quirk applies to
+ * @dns_modes: do not suspend modes: stop suspending if Ethernet is configured
+ *	       as wakeup source but buggy and no other wakeup source is
+ *	       available
+ */
+struct at91_pm_quirk_eth {
+	struct device *dev;
+	struct device_node *np;
+	struct clk_bulk_data clks[AT91_PM_ETH_MAX_CLK];
+	u32 modes;
+	u32 dns_modes;
+};
+
+/**
+ * struct at91_pm_quirks - AT91 PM quirks
+ * @eth: Ethernet quirks
+ */
+struct at91_pm_quirks {
+	struct at91_pm_quirk_eth eth[AT91_PM_MAX_ETH];
+};
+
+/**
+ * struct at91_soc_pm - AT91 SoC power management data structure
+ * @config_shdwc_ws: wakeup sources configuration function for SHDWC
+ * @config_pmc_ws: wakeup srouces configuration function for PMC
+ * @ws_ids: wakup sources of_device_id array
+ * @bu: backup unit mapped data (for backup mode)
+ * @quirks: PM quirks
+ * @data: PM data to be used on last phase of suspend
+ * @sfrbu_regs: SFRBU registers mapping
+ * @memcs: memory chip select
+ */
 struct at91_soc_pm {
 	int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
 	int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
 	const struct of_device_id *ws_ids;
+	struct at91_pm_bu *bu;
+	struct at91_pm_quirks quirks;
 	struct at91_pm_data data;
+	struct at91_pm_sfrbu_regs sfrbu_regs;
+	void *memcs;
+};
+
+/**
+ * enum at91_pm_iomaps - IOs that needs to be mapped for different PM modes
+ * @AT91_PM_IOMAP_SHDWC:	SHDWC controller
+ * @AT91_PM_IOMAP_SFRBU:	SFRBU controller
+ * @AT91_PM_IOMAP_ETHC:		Ethernet controller
+ */
+enum at91_pm_iomaps {
+	AT91_PM_IOMAP_SHDWC,
+	AT91_PM_IOMAP_SFRBU,
+	AT91_PM_IOMAP_ETHC,
 };
 
+#define AT91_PM_IOMAP(name)	BIT(AT91_PM_IOMAP_##name)
+
 static struct at91_soc_pm soc_pm = {
 	.data = {
 		.standby_mode = AT91_PM_STANDBY,
@@ -80,13 +183,6 @@ static int at91_pm_valid_state(suspend_state_t state)
 
 static int canary = 0xA5A5A5A5;
 
-static struct at91_pm_bu {
-	int suspended;
-	unsigned long reserved;
-	phys_addr_t canary;
-	phys_addr_t resume;
-} *pm_bu;
-
 struct wakeup_source_info {
 	unsigned int pmc_fsmr_bit;
 	unsigned int shdwc_mr_bit;
@@ -104,7 +200,7 @@ static const struct wakeup_source_info ws_info[] = {
 
 static const struct of_device_id sama5d2_ws_ids[] = {
 	{ .compatible = "atmel,sama5d2-gem",		.data = &ws_info[0] },
-	{ .compatible = "atmel,at91rm9200-rtc",		.data = &ws_info[1] },
+	{ .compatible = "atmel,sama5d2-rtc",		.data = &ws_info[1] },
 	{ .compatible = "atmel,sama5d3-udc",		.data = &ws_info[2] },
 	{ .compatible = "atmel,at91rm9200-ohci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
@@ -115,16 +211,27 @@ static const struct of_device_id sama5d2_ws_ids[] = {
 };
 
 static const struct of_device_id sam9x60_ws_ids[] = {
-	{ .compatible = "atmel,at91sam9x5-rtc",		.data = &ws_info[1] },
+	{ .compatible = "microchip,sam9x60-rtc",	.data = &ws_info[1] },
 	{ .compatible = "atmel,at91rm9200-ohci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
 	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
 	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
-	{ .compatible = "atmel,at91sam9260-rtt",	.data = &ws_info[4] },
+	{ .compatible = "microchip,sam9x60-rtt",	.data = &ws_info[4] },
 	{ .compatible = "cdns,sam9x60-macb",		.data = &ws_info[5] },
 	{ /* sentinel */ }
 };
 
+static const struct of_device_id sama7g5_ws_ids[] = {
+	{ .compatible = "microchip,sama7g5-rtc",	.data = &ws_info[1] },
+	{ .compatible = "microchip,sama7g5-ohci",	.data = &ws_info[2] },
+	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
+	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
+	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
+	{ .compatible = "microchip,sama7g5-sdhci",	.data = &ws_info[3] },
+	{ .compatible = "microchip,sama7g5-rtt",	.data = &ws_info[4] },
+	{ /* sentinel */ }
+};
+
 static int at91_pm_config_ws(unsigned int pm_mode, bool set)
 {
 	const struct wakeup_source_info *wsi;
@@ -210,11 +317,148 @@ static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
 	return 0;
 }
 
+static bool at91_pm_eth_quirk_is_valid(struct at91_pm_quirk_eth *eth)
+{
+	struct platform_device *pdev;
+
+	/* Interface NA in DT. */
+	if (!eth->np)
+		return false;
+
+	/* No quirks for this interface and current suspend mode. */
+	if (!(eth->modes & BIT(soc_pm.data.mode)))
+		return false;
+
+	if (!eth->dev) {
+		/* Driver not probed. */
+		pdev = of_find_device_by_node(eth->np);
+		if (!pdev)
+			return false;
+		eth->dev = &pdev->dev;
+	}
+
+	/* No quirks if device isn't a wakeup source. */
+	if (!device_may_wakeup(eth->dev)) {
+		put_device(eth->dev);
+		return false;
+	}
+
+	/* put_device(eth->dev) is called at the end of suspend. */
+	return true;
+}
+
+static int at91_pm_config_quirks(bool suspend)
+{
+	struct at91_pm_quirk_eth *eth;
+	int i, j, ret, tmp;
+
+	/*
+	 * Ethernet IPs who's device_node pointers are stored into
+	 * soc_pm.quirks.eth[].np cannot handle WoL packets while in ULP0, ULP1
+	 * or both due to a hardware bug. If they receive WoL packets while in
+	 * ULP0 or ULP1 IPs could stop working or the whole system could stop
+	 * working. We cannot handle this scenario in the ethernet driver itself
+	 * as the driver is common to multiple vendors and also we only know
+	 * here, in this file, if we suspend to ULP0 or ULP1 mode. Thus handle
+	 * these scenarios here, as quirks.
+	 */
+	for (i = 0; i < AT91_PM_MAX_ETH; i++) {
+		eth = &soc_pm.quirks.eth[i];
+
+		if (!at91_pm_eth_quirk_is_valid(eth))
+			continue;
+
+		/*
+		 * For modes in dns_modes mask the system blocks if quirk is not
+		 * applied but if applied the interface doesn't act at WoL
+		 * events. Thus take care to avoid suspending if this interface
+		 * is the only configured wakeup source.
+		 */
+		if (suspend && eth->dns_modes & BIT(soc_pm.data.mode)) {
+			int ws_count = 0;
+#ifdef CONFIG_PM_SLEEP
+			struct wakeup_source *ws;
+
+			for_each_wakeup_source(ws) {
+				if (ws->dev == eth->dev)
+					continue;
+
+				ws_count++;
+				break;
+			}
+#endif
+
+			/*
+			 * Checking !ws is good for all platforms with issues
+			 * even when both G_ETH and E_ETH are available as dns_modes
+			 * is populated only on G_ETH interface.
+			 */
+			if (!ws_count) {
+				pr_err("AT91: PM: Ethernet cannot resume from WoL!");
+				ret = -EPERM;
+				put_device(eth->dev);
+				eth->dev = NULL;
+				/* No need to revert clock settings for this eth. */
+				i--;
+				goto clk_unconfigure;
+			}
+		}
+
+		if (suspend) {
+			clk_bulk_disable_unprepare(AT91_PM_ETH_MAX_CLK, eth->clks);
+		} else {
+			ret = clk_bulk_prepare_enable(AT91_PM_ETH_MAX_CLK,
+						      eth->clks);
+			if (ret)
+				goto clk_unconfigure;
+			/*
+			 * Release the reference to eth->dev taken in
+			 * at91_pm_eth_quirk_is_valid().
+			 */
+			put_device(eth->dev);
+			eth->dev = NULL;
+		}
+	}
+
+	return 0;
+
+clk_unconfigure:
+	/*
+	 * In case of resume we reach this point if clk_prepare_enable() failed.
+	 * we don't want to revert the previous clk_prepare_enable() for the
+	 * other IP.
+	 */
+	for (j = i; j >= 0; j--) {
+		eth = &soc_pm.quirks.eth[j];
+		if (suspend) {
+			if (!at91_pm_eth_quirk_is_valid(eth))
+				continue;
+
+			tmp = clk_bulk_prepare_enable(AT91_PM_ETH_MAX_CLK, eth->clks);
+			if (tmp) {
+				pr_err("AT91: PM: failed to enable %s clocks\n",
+				       j == AT91_PM_G_ETH ? "geth" : "eth");
+			}
+		} else {
+			/*
+			 * Release the reference to eth->dev taken in
+			 * at91_pm_eth_quirk_is_valid().
+			 */
+			put_device(eth->dev);
+			eth->dev = NULL;
+		}
+	}
+
+	return ret;
+}
+
 /*
  * Called after processes are frozen, but before we shutdown devices.
  */
 static int at91_pm_begin(suspend_state_t state)
 {
+	int ret;
+
 	switch (state) {
 	case PM_SUSPEND_MEM:
 		soc_pm.data.mode = soc_pm.data.suspend_mode;
@@ -228,7 +472,16 @@ static int at91_pm_begin(suspend_state_t state)
 		soc_pm.data.mode = -1;
 	}
 
-	return at91_pm_config_ws(soc_pm.data.mode, true);
+	ret = at91_pm_config_ws(soc_pm.data.mode, true);
+	if (ret)
+		return ret;
+
+	if (soc_pm.data.mode == AT91_PM_BACKUP)
+		soc_pm.bu->suspended = 1;
+	else if (soc_pm.bu)
+		soc_pm.bu->suspended = 0;
+
+	return 0;
 }
 
 /*
@@ -286,6 +539,51 @@ extern u32 at91_pm_suspend_in_sram_sz;
 
 static int at91_suspend_finish(unsigned long val)
 {
+	unsigned char modified_gray_code[] = {
+		0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, 0x0c, 0x0d,
+		0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, 0x18, 0x19, 0x1a, 0x1b,
+		0x1e, 0x1f, 0x1c, 0x1d, 0x14, 0x15, 0x16, 0x17, 0x12, 0x13,
+		0x10, 0x11,
+	};
+	unsigned int tmp, index;
+	int i;
+
+	if (soc_pm.data.mode == AT91_PM_BACKUP && soc_pm.data.ramc_phy) {
+		/*
+		 * Bootloader will perform DDR recalibration and will try to
+		 * restore the ZQ0SR0 with the value saved here. But the
+		 * calibration is buggy and restoring some values from ZQ0SR0
+		 * is forbidden and risky thus we need to provide processed
+		 * values for these (modified gray code values).
+		 */
+		tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0);
+
+		/* Store pull-down output impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] = modified_gray_code[index];
+
+		/* Store pull-up output impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+		/* Store pull-down on-die termination impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+		/* Store pull-up on-die termination impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+		/*
+		 * The 1st 8 words of memory might get corrupted in the process
+		 * of DDR PHY recalibration; it is saved here in securam and it
+		 * will be restored later, after recalibration, by bootloader
+		 */
+		for (i = 1; i < BACKUP_DDR_PHY_CALIBRATION; i++)
+			soc_pm.bu->ddr_phy_calibration[i] =
+				*((unsigned int *)soc_pm.memcs + (i - 1));
+	}
+
 	flush_cache_all();
 	outer_disable();
 
@@ -294,10 +592,35 @@ static int at91_suspend_finish(unsigned long val)
 	return 0;
 }
 
+static void at91_pm_switch_ba_to_vbat(void)
+{
+	unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu);
+	unsigned int val;
+
+	/* Just for safety. */
+	if (!soc_pm.data.sfrbu)
+		return;
+
+	val = readl(soc_pm.data.sfrbu + offset);
+
+	/* Already on VBAT. */
+	if (!(val & soc_pm.sfrbu_regs.pswbu.state))
+		return;
+
+	val &= ~soc_pm.sfrbu_regs.pswbu.softsw;
+	val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl;
+	writel(val, soc_pm.data.sfrbu + offset);
+
+	/* Wait for update. */
+	val = readl(soc_pm.data.sfrbu + offset);
+	while (val & soc_pm.sfrbu_regs.pswbu.state)
+		val = readl(soc_pm.data.sfrbu + offset);
+}
+
 static void at91_pm_suspend(suspend_state_t state)
 {
 	if (soc_pm.data.mode == AT91_PM_BACKUP) {
-		pm_bu->suspended = 1;
+		at91_pm_switch_ba_to_vbat();
 
 		cpu_suspend(0, at91_suspend_finish);
 
@@ -325,9 +648,11 @@ static void at91_pm_suspend(suspend_state_t state)
  */
 static int at91_pm_enter(suspend_state_t state)
 {
-#ifdef CONFIG_PINCTRL_AT91
-	at91_pinctrl_gpio_suspend();
-#endif
+	int ret;
+
+	ret = at91_pm_config_quirks(true);
+	if (ret)
+		return ret;
 
 	switch (state) {
 	case PM_SUSPEND_MEM:
@@ -353,9 +678,7 @@ static int at91_pm_enter(suspend_state_t state)
 	}
 
 error:
-#ifdef CONFIG_PINCTRL_AT91
-	at91_pinctrl_gpio_resume();
-#endif
+	at91_pm_config_quirks(false);
 	return 0;
 }
 
@@ -497,6 +820,30 @@ static void at91sam9_sdram_standby(void)
 		at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
 }
 
+static void sama7g5_standby(void)
+{
+	int pwrtmg, ratio;
+
+	pwrtmg = readl(soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+	ratio = readl(soc_pm.data.pmc + AT91_PMC_RATIO);
+
+	/*
+	 * Place RAM into self-refresh after a maximum idle clocks. The maximum
+	 * idle clocks is configured by bootloader in
+	 * UDDRC_PWRMGT.SELFREF_TO_X32.
+	 */
+	writel(pwrtmg | UDDRC_PWRCTL_SELFREF_EN,
+	       soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+	/* Divide CPU clock by 16. */
+	writel(ratio & ~AT91_PMC_RATIO_RATIO, soc_pm.data.pmc + AT91_PMC_RATIO);
+
+	cpu_do_idle();
+
+	/* Restore previous configuration. */
+	writel(ratio, soc_pm.data.pmc + AT91_PMC_RATIO);
+	writel(pwrtmg, soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+}
+
 struct ramc_info {
 	void (*idle)(void);
 	unsigned int memctrl;
@@ -507,6 +854,7 @@ static const struct ramc_info ramc_infos[] __initconst = {
 	{ .idle = at91sam9_sdram_standby, .memctrl = AT91_MEMCTRL_SDRAMC},
 	{ .idle = at91_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
 	{ .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
+	{ .idle = sama7g5_standby, },
 };
 
 static const struct of_device_id ramc_ids[] __initconst = {
@@ -514,39 +862,80 @@ static const struct of_device_id ramc_ids[] __initconst = {
 	{ .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
 	{ .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },
 	{ .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] },
+	{ .compatible = "microchip,sama7g5-uddrc", .data = &ramc_infos[4], },
 	{ /*sentinel*/ }
 };
 
-static __init void at91_dt_ramc(void)
+static const struct of_device_id ramc_phy_ids[] __initconst = {
+	{ .compatible = "microchip,sama7g5-ddr3phy", },
+	{ /* Sentinel. */ },
+};
+
+static __init int at91_dt_ramc(bool phy_mandatory)
 {
 	struct device_node *np;
 	const struct of_device_id *of_id;
 	int idx = 0;
 	void *standby = NULL;
 	const struct ramc_info *ramc;
+	int ret;
 
 	for_each_matching_node_and_match(np, ramc_ids, &of_id) {
 		soc_pm.data.ramc[idx] = of_iomap(np, 0);
-		if (!soc_pm.data.ramc[idx])
-			panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
+		if (!soc_pm.data.ramc[idx]) {
+			pr_err("unable to map ramc[%d] cpu registers\n", idx);
+			ret = -ENOMEM;
+			of_node_put(np);
+			goto unmap_ramc;
+		}
 
 		ramc = of_id->data;
-		if (!standby)
-			standby = ramc->idle;
-		soc_pm.data.memctrl = ramc->memctrl;
+		if (ramc) {
+			if (!standby)
+				standby = ramc->idle;
+			soc_pm.data.memctrl = ramc->memctrl;
+		}
 
 		idx++;
 	}
 
-	if (!idx)
-		panic(pr_fmt("unable to find compatible ram controller node in dtb\n"));
+	if (!idx) {
+		pr_err("unable to find compatible ram controller node in dtb\n");
+		ret = -ENODEV;
+		goto unmap_ramc;
+	}
+
+	/* Lookup for DDR PHY node, if any. */
+	for_each_matching_node_and_match(np, ramc_phy_ids, &of_id) {
+		soc_pm.data.ramc_phy = of_iomap(np, 0);
+		if (!soc_pm.data.ramc_phy) {
+			pr_err("unable to map ramc phy cpu registers\n");
+			ret = -ENOMEM;
+			of_node_put(np);
+			goto unmap_ramc;
+		}
+	}
+
+	if (phy_mandatory && !soc_pm.data.ramc_phy) {
+		pr_err("DDR PHY is mandatory!\n");
+		ret = -ENODEV;
+		goto unmap_ramc;
+	}
 
 	if (!standby) {
 		pr_warn("ramc no standby function available\n");
-		return;
+		return 0;
 	}
 
 	at91_cpuidle_device.dev.platform_data = standby;
+
+	return 0;
+
+unmap_ramc:
+	while (idx)
+		iounmap(soc_pm.data.ramc[--idx]);
+
+	return ret;
 }
 
 static void at91rm9200_idle(void)
@@ -621,37 +1010,57 @@ static bool __init at91_is_pm_mode_active(int pm_mode)
 		soc_pm.data.suspend_mode == pm_mode);
 }
 
+static int __init at91_pm_backup_scan_memcs(unsigned long node,
+					    const char *uname, int depth,
+					    void *data)
+{
+	const char *type;
+	const __be32 *reg;
+	int *located = data;
+	int size;
+
+	/* Memory node already located. */
+	if (*located)
+		return 0;
+
+	type = of_get_flat_dt_prop(node, "device_type", NULL);
+
+	/* We are scanning "memory" nodes only. */
+	if (!type || strcmp(type, "memory"))
+		return 0;
+
+	reg = of_get_flat_dt_prop(node, "reg", &size);
+	if (reg) {
+		soc_pm.memcs = __va((phys_addr_t)be32_to_cpu(*reg));
+		*located = 1;
+	}
+
+	return 0;
+}
+
 static int __init at91_pm_backup_init(void)
 {
 	struct gen_pool *sram_pool;
 	struct device_node *np;
-	struct platform_device *pdev = NULL;
-	int ret = -ENODEV;
+	struct platform_device *pdev;
+	int ret = -ENODEV, located = 0;
 
-	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
+	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2) &&
+	    !IS_ENABLED(CONFIG_SOC_SAMA7G5))
 		return -EPERM;
 
 	if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
 		return 0;
 
-	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu");
-	if (!np) {
-		pr_warn("%s: failed to find sfrbu!\n", __func__);
-		return ret;
-	}
-
-	soc_pm.data.sfrbu = of_iomap(np, 0);
-	of_node_put(np);
-
 	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
 	if (!np)
-		goto securam_fail_no_ref_dev;
+		return ret;
 
 	pdev = of_find_device_by_node(np);
 	of_node_put(np);
 	if (!pdev) {
 		pr_warn("%s: failed to find securam device!\n", __func__);
-		goto securam_fail_no_ref_dev;
+		return ret;
 	}
 
 	sram_pool = gen_pool_get(&pdev->dev, NULL);
@@ -660,79 +1069,242 @@ static int __init at91_pm_backup_init(void)
 		goto securam_fail;
 	}
 
-	pm_bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu));
-	if (!pm_bu) {
+	soc_pm.bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu));
+	if (!soc_pm.bu) {
 		pr_warn("%s: unable to alloc securam!\n", __func__);
 		ret = -ENOMEM;
 		goto securam_fail;
 	}
 
-	pm_bu->suspended = 0;
-	pm_bu->canary = __pa_symbol(&canary);
-	pm_bu->resume = __pa_symbol(cpu_resume);
+	soc_pm.bu->suspended = 0;
+	soc_pm.bu->canary = __pa_symbol(&canary);
+	soc_pm.bu->resume = __pa_symbol(cpu_resume);
+	if (soc_pm.data.ramc_phy) {
+		of_scan_flat_dt(at91_pm_backup_scan_memcs, &located);
+		if (!located)
+			goto securam_fail;
+	}
 
 	return 0;
 
 securam_fail:
 	put_device(&pdev->dev);
-securam_fail_no_ref_dev:
-	iounmap(soc_pm.data.sfrbu);
-	soc_pm.data.sfrbu = NULL;
 	return ret;
 }
 
-static void __init at91_pm_use_default_mode(int pm_mode)
+static void __init at91_pm_secure_init(void)
 {
-	if (pm_mode != AT91_PM_ULP1 && pm_mode != AT91_PM_BACKUP)
+	int suspend_mode;
+	struct arm_smccc_res res;
+
+	suspend_mode = soc_pm.data.suspend_mode;
+
+	res = sam_smccc_call(SAMA5_SMC_SIP_SET_SUSPEND_MODE,
+			     suspend_mode, 0);
+	if (res.a0 == 0) {
+		pr_info("AT91: Secure PM: suspend mode set to %s\n",
+			pm_modes[suspend_mode].pattern);
 		return;
+	}
 
-	if (soc_pm.data.standby_mode == pm_mode)
-		soc_pm.data.standby_mode = AT91_PM_ULP0;
-	if (soc_pm.data.suspend_mode == pm_mode)
-		soc_pm.data.suspend_mode = AT91_PM_ULP0;
-}
+	pr_warn("AT91: Secure PM: %s mode not supported !\n",
+		pm_modes[suspend_mode].pattern);
+
+	res = sam_smccc_call(SAMA5_SMC_SIP_GET_SUSPEND_MODE, 0, 0);
+	if (res.a0 == 0) {
+		pr_warn("AT91: Secure PM: failed to get default mode\n");
+		return;
+	}
 
+	pr_info("AT91: Secure PM: using default suspend mode %s\n",
+		pm_modes[suspend_mode].pattern);
+
+	soc_pm.data.suspend_mode = res.a1;
+}
 static const struct of_device_id atmel_shdwc_ids[] = {
 	{ .compatible = "atmel,sama5d2-shdwc" },
 	{ .compatible = "microchip,sam9x60-shdwc" },
+	{ .compatible = "microchip,sama7g5-shdwc" },
 	{ /* sentinel. */ }
 };
 
-static void __init at91_pm_modes_init(void)
+static const struct of_device_id gmac_ids[] __initconst = {
+	{ .compatible = "atmel,sama5d3-gem" },
+	{ .compatible = "atmel,sama5d2-gem" },
+	{ .compatible = "atmel,sama5d29-gem" },
+	{ .compatible = "microchip,sama7g5-gem" },
+	{ },
+};
+
+static const struct of_device_id emac_ids[] __initconst = {
+	{ .compatible = "atmel,sama5d3-macb" },
+	{ .compatible = "microchip,sama7g5-emac" },
+	{ },
+};
+
+/*
+ * Replaces _mode_to_replace with a supported mode that doesn't depend
+ * on controller pointed by _map_bitmask
+ * @_maps: u32 array containing AT91_PM_IOMAP() flags and indexed by AT91
+ * PM mode
+ * @_map_bitmask: AT91_PM_IOMAP() bitmask; if _mode_to_replace depends on
+ * controller represented by _map_bitmask, _mode_to_replace needs to be
+ * updated
+ * @_mode_to_replace: standby_mode or suspend_mode that need to be
+ * updated
+ * @_mode_to_check: standby_mode or suspend_mode; this is needed here
+ * to avoid having standby_mode and suspend_mode set with the same AT91
+ * PM mode
+ */
+#define AT91_PM_REPLACE_MODE(_maps, _map_bitmask, _mode_to_replace,	\
+			     _mode_to_check)				\
+	do {								\
+		if (((_maps)[(_mode_to_replace)]) & (_map_bitmask)) {	\
+			int _mode_to_use, _mode_complementary;		\
+			/* Use ULP0 if it doesn't need _map_bitmask. */	\
+			if (!((_maps)[AT91_PM_ULP0] & (_map_bitmask))) {\
+				_mode_to_use = AT91_PM_ULP0;		\
+				_mode_complementary = AT91_PM_STANDBY;	\
+			} else {					\
+				_mode_to_use = AT91_PM_STANDBY;		\
+				_mode_complementary = AT91_PM_STANDBY;	\
+			}						\
+									\
+			if ((_mode_to_check) != _mode_to_use)		\
+				(_mode_to_replace) = _mode_to_use;	\
+			else						\
+				(_mode_to_replace) = _mode_complementary;\
+		}							\
+	} while (0)
+
+/*
+ * Replaces standby and suspend modes with default supported modes:
+ * ULP0 and STANDBY.
+ * @_maps: u32 array indexed by AT91 PM mode containing AT91_PM_IOMAP()
+ * flags
+ * @_map: controller specific name; standby and suspend mode need to be
+ * replaced in order to not depend on this controller
+ */
+#define AT91_PM_REPLACE_MODES(_maps, _map)				\
+	do {								\
+		AT91_PM_REPLACE_MODE((_maps), BIT(AT91_PM_IOMAP_##_map),\
+				     (soc_pm.data.standby_mode),	\
+				     (soc_pm.data.suspend_mode));	\
+		AT91_PM_REPLACE_MODE((_maps), BIT(AT91_PM_IOMAP_##_map),\
+				     (soc_pm.data.suspend_mode),	\
+				     (soc_pm.data.standby_mode));	\
+	} while (0)
+
+static int __init at91_pm_get_eth_clks(struct device_node *np,
+				       struct clk_bulk_data *clks)
+{
+	clks[AT91_PM_ETH_PCLK].clk = of_clk_get_by_name(np, "pclk");
+	if (IS_ERR(clks[AT91_PM_ETH_PCLK].clk))
+		return PTR_ERR(clks[AT91_PM_ETH_PCLK].clk);
+
+	clks[AT91_PM_ETH_HCLK].clk = of_clk_get_by_name(np, "hclk");
+	if (IS_ERR(clks[AT91_PM_ETH_HCLK].clk))
+		return PTR_ERR(clks[AT91_PM_ETH_HCLK].clk);
+
+	return 0;
+}
+
+static int __init at91_pm_eth_clks_empty(struct clk_bulk_data *clks)
+{
+	return IS_ERR(clks[AT91_PM_ETH_PCLK].clk) ||
+	       IS_ERR(clks[AT91_PM_ETH_HCLK].clk);
+}
+
+static void __init at91_pm_modes_init(const u32 *maps, int len)
 {
+	struct at91_pm_quirk_eth *gmac = &soc_pm.quirks.eth[AT91_PM_G_ETH];
+	struct at91_pm_quirk_eth *emac = &soc_pm.quirks.eth[AT91_PM_E_ETH];
 	struct device_node *np;
 	int ret;
 
-	if (!at91_is_pm_mode_active(AT91_PM_BACKUP) &&
-	    !at91_is_pm_mode_active(AT91_PM_ULP1))
-		return;
+	ret = at91_pm_backup_init();
+	if (ret) {
+		if (soc_pm.data.standby_mode == AT91_PM_BACKUP)
+			soc_pm.data.standby_mode = AT91_PM_ULP0;
+		if (soc_pm.data.suspend_mode == AT91_PM_BACKUP)
+			soc_pm.data.suspend_mode = AT91_PM_ULP0;
+	}
 
-	np = of_find_matching_node(NULL, atmel_shdwc_ids);
-	if (!np) {
-		pr_warn("%s: failed to find shdwc!\n", __func__);
-		goto ulp1_default;
+	if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) ||
+	    maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC)) {
+		np = of_find_matching_node(NULL, atmel_shdwc_ids);
+		if (!np) {
+			pr_warn("%s: failed to find shdwc!\n", __func__);
+			AT91_PM_REPLACE_MODES(maps, SHDWC);
+		} else {
+			soc_pm.data.shdwc = of_iomap(np, 0);
+			of_node_put(np);
+		}
 	}
 
-	soc_pm.data.shdwc = of_iomap(np, 0);
-	of_node_put(np);
+	if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU) ||
+	    maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU)) {
+		np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu");
+		if (!np) {
+			pr_warn("%s: failed to find sfrbu!\n", __func__);
+			AT91_PM_REPLACE_MODES(maps, SFRBU);
+		} else {
+			soc_pm.data.sfrbu = of_iomap(np, 0);
+			of_node_put(np);
+		}
+	}
 
-	ret = at91_pm_backup_init();
-	if (ret) {
-		if (!at91_is_pm_mode_active(AT91_PM_ULP1))
-			goto unmap;
-		else
-			goto backup_default;
+	if ((at91_is_pm_mode_active(AT91_PM_ULP1) ||
+	     at91_is_pm_mode_active(AT91_PM_ULP0) ||
+	     at91_is_pm_mode_active(AT91_PM_ULP0_FAST)) &&
+	    (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(ETHC) ||
+	     maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(ETHC))) {
+		np = of_find_matching_node(NULL, gmac_ids);
+		if (!np) {
+			np = of_find_matching_node(NULL, emac_ids);
+			if (np)
+				goto get_emac_clks;
+			AT91_PM_REPLACE_MODES(maps, ETHC);
+			goto unmap_unused_nodes;
+		} else {
+			gmac->np = np;
+			at91_pm_get_eth_clks(np, gmac->clks);
+		}
+
+		np = of_find_matching_node(NULL, emac_ids);
+		if (!np) {
+			if (at91_pm_eth_clks_empty(gmac->clks))
+				AT91_PM_REPLACE_MODES(maps, ETHC);
+		} else {
+get_emac_clks:
+			emac->np = np;
+			ret = at91_pm_get_eth_clks(np, emac->clks);
+			if (ret && at91_pm_eth_clks_empty(gmac->clks)) {
+				of_node_put(gmac->np);
+				of_node_put(emac->np);
+				gmac->np = NULL;
+				emac->np = NULL;
+			}
+		}
 	}
 
-	return;
+unmap_unused_nodes:
+	/* Unmap all unnecessary. */
+	if (soc_pm.data.shdwc &&
+	    !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) ||
+	      maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC))) {
+		iounmap(soc_pm.data.shdwc);
+		soc_pm.data.shdwc = NULL;
+	}
+
+	if (soc_pm.data.sfrbu &&
+	    !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU) ||
+	      maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU))) {
+		iounmap(soc_pm.data.sfrbu);
+		soc_pm.data.sfrbu = NULL;
+	}
 
-unmap:
-	iounmap(soc_pm.data.shdwc);
-	soc_pm.data.shdwc = NULL;
-ulp1_default:
-	at91_pm_use_default_mode(AT91_PM_ULP1);
-backup_default:
-	at91_pm_use_default_mode(AT91_PM_BACKUP);
+	return;
 }
 
 struct pmc_info {
@@ -767,6 +1339,11 @@ static const struct pmc_info pmc_infos[] __initconst = {
 		.mckr = 0x28,
 		.version = AT91_PMC_V2,
 	},
+	{
+		.mckr = 0x28,
+		.version = AT91_PMC_V2,
+	},
+
 };
 
 static const struct of_device_id atmel_pmc_ids[] __initconst = {
@@ -782,6 +1359,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
 	{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
+	{ .compatible = "microchip,sama7g5-pmc", .data = &pmc_infos[5] },
 	{ /* sentinel */ },
 };
 
@@ -869,6 +1447,8 @@ static void __init at91_pm_init(void (*pm_idle)(void))
 
 void __init at91rm9200_pm_init(void)
 {
+	int ret;
+
 	if (!IS_ENABLED(CONFIG_SOC_AT91RM9200))
 		return;
 
@@ -880,7 +1460,9 @@ void __init at91rm9200_pm_init(void)
 	soc_pm.data.standby_mode = AT91_PM_STANDBY;
 	soc_pm.data.suspend_mode = AT91_PM_ULP0;
 
-	at91_dt_ramc();
+	ret = at91_dt_ramc(false);
+	if (ret)
+		return;
 
 	/*
 	 * AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
@@ -895,13 +1477,20 @@ void __init sam9x60_pm_init(void)
 	static const int modes[] __initconst = {
 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
 	};
+	static const int iomaps[] __initconst = {
+		[AT91_PM_ULP1]		= AT91_PM_IOMAP(SHDWC),
+	};
+	int ret;
 
 	if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
 		return;
 
 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
-	at91_pm_modes_init();
-	at91_dt_ramc();
+	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
+	ret = at91_dt_ramc(false);
+	if (ret)
+		return;
+
 	at91_pm_init(NULL);
 
 	soc_pm.ws_ids = sam9x60_ws_ids;
@@ -910,6 +1499,8 @@ void __init sam9x60_pm_init(void)
 
 void __init at91sam9_pm_init(void)
 {
+	int ret;
+
 	if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
 		return;
 
@@ -921,7 +1512,10 @@ void __init at91sam9_pm_init(void)
 	soc_pm.data.standby_mode = AT91_PM_STANDBY;
 	soc_pm.data.suspend_mode = AT91_PM_ULP0;
 
-	at91_dt_ramc();
+	ret = at91_dt_ramc(false);
+	if (ret)
+		return;
+
 	at91_pm_init(at91sam9_idle);
 }
 
@@ -930,13 +1524,30 @@ void __init sama5_pm_init(void)
 	static const int modes[] __initconst = {
 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST,
 	};
+	static const u32 iomaps[] __initconst = {
+		[AT91_PM_ULP0]		= AT91_PM_IOMAP(ETHC),
+		[AT91_PM_ULP0_FAST]	= AT91_PM_IOMAP(ETHC),
+	};
+	int ret;
 
 	if (!IS_ENABLED(CONFIG_SOC_SAMA5))
 		return;
 
 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
-	at91_dt_ramc();
+	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
+	ret = at91_dt_ramc(false);
+	if (ret)
+		return;
+
 	at91_pm_init(NULL);
+
+	/* Quirks applies to ULP0, ULP0 fast and ULP1 modes. */
+	soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP0) |
+						 BIT(AT91_PM_ULP0_FAST) |
+						 BIT(AT91_PM_ULP1);
+	/* Do not suspend in ULP0, ULP0 fast if GETH is the only wakeup source. */
+	soc_pm.quirks.eth[AT91_PM_G_ETH].dns_modes = BIT(AT91_PM_ULP0) |
+						     BIT(AT91_PM_ULP0_FAST);
 }
 
 void __init sama5d2_pm_init(void)
@@ -945,18 +1556,92 @@ void __init sama5d2_pm_init(void)
 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
 		AT91_PM_BACKUP,
 	};
+	static const u32 iomaps[] __initconst = {
+		[AT91_PM_ULP0]		= AT91_PM_IOMAP(ETHC),
+		[AT91_PM_ULP0_FAST]	= AT91_PM_IOMAP(ETHC),
+		[AT91_PM_ULP1]		= AT91_PM_IOMAP(SHDWC) |
+					  AT91_PM_IOMAP(ETHC),
+		[AT91_PM_BACKUP]	= AT91_PM_IOMAP(SHDWC) |
+					  AT91_PM_IOMAP(SFRBU),
+	};
+	int ret;
 
 	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
 		return;
 
+	if (IS_ENABLED(CONFIG_ATMEL_SECURE_PM)) {
+		pr_warn("AT91: Secure PM: ignoring standby mode\n");
+		at91_pm_secure_init();
+		return;
+	}
+
 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
-	at91_pm_modes_init();
-	at91_dt_ramc();
+	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
+	ret = at91_dt_ramc(false);
+	if (ret)
+		return;
+
 	at91_pm_init(NULL);
 
 	soc_pm.ws_ids = sama5d2_ws_ids;
 	soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws;
 	soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws;
+
+	soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
+	soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
+	soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
+	soc_pm.sfrbu_regs.pswbu.state = BIT(3);
+
+	/* Quirk applies to ULP0, ULP0 fast and ULP1 modes. */
+	soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP0) |
+						 BIT(AT91_PM_ULP0_FAST) |
+						 BIT(AT91_PM_ULP1);
+	/*
+	 * Do not suspend in ULP0, ULP0 fast if GETH is the only wakeup
+	 * source.
+	 */
+	soc_pm.quirks.eth[AT91_PM_G_ETH].dns_modes = BIT(AT91_PM_ULP0) |
+						     BIT(AT91_PM_ULP0_FAST);
+}
+
+void __init sama7_pm_init(void)
+{
+	static const int modes[] __initconst = {
+		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP1, AT91_PM_BACKUP,
+	};
+	static const u32 iomaps[] __initconst = {
+		[AT91_PM_ULP0]		= AT91_PM_IOMAP(SFRBU),
+		[AT91_PM_ULP1]		= AT91_PM_IOMAP(SFRBU) |
+					  AT91_PM_IOMAP(SHDWC) |
+					  AT91_PM_IOMAP(ETHC),
+		[AT91_PM_BACKUP]	= AT91_PM_IOMAP(SFRBU) |
+					  AT91_PM_IOMAP(SHDWC),
+	};
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_SOC_SAMA7))
+		return;
+
+	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
+
+	ret = at91_dt_ramc(true);
+	if (ret)
+		return;
+
+	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
+	at91_pm_init(NULL);
+
+	soc_pm.ws_ids = sama7g5_ws_ids;
+	soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
+
+	soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
+	soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
+	soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
+	soc_pm.sfrbu_regs.pswbu.state = BIT(2);
+
+	/* Quirks applies to ULP1 for both Ethernet interfaces. */
+	soc_pm.quirks.eth[AT91_PM_E_ETH].modes = BIT(AT91_PM_ULP1);
+	soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP1);
 }
 
 static int __init at91_pm_modes_select(char *str)
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index bfb260be371e..53bdc9000e44 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -12,6 +12,8 @@
 #include <linux/mfd/syscon/atmel-mc.h>
 #include <soc/at91/at91sam9_ddrsdr.h>
 #include <soc/at91/at91sam9_sdramc.h>
+#include <soc/at91/sama7-ddr.h>
+#include <soc/at91/sama7-sfrbu.h>
 
 #define AT91_MEMCTRL_MC		0
 #define AT91_MEMCTRL_SDRAMC	1
@@ -27,6 +29,7 @@
 struct at91_pm_data {
 	void __iomem *pmc;
 	void __iomem *ramc[2];
+	void __iomem *ramc_phy;
 	unsigned long uhp_udp_mask;
 	unsigned int memctrl;
 	unsigned int mode;
diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
index 82089ff258c0..40bd4e8fe40a 100644
--- a/arch/arm/mach-at91/pm_data-offsets.c
+++ b/arch/arm/mach-at91/pm_data-offsets.c
@@ -8,6 +8,8 @@ int main(void)
 	DEFINE(PM_DATA_PMC,		offsetof(struct at91_pm_data, pmc));
 	DEFINE(PM_DATA_RAMC0,		offsetof(struct at91_pm_data, ramc[0]));
 	DEFINE(PM_DATA_RAMC1,		offsetof(struct at91_pm_data, ramc[1]));
+	DEFINE(PM_DATA_RAMC_PHY,	offsetof(struct at91_pm_data,
+						 ramc_phy));
 	DEFINE(PM_DATA_MEMCTRL,	offsetof(struct at91_pm_data, memctrl));
 	DEFINE(PM_DATA_MODE,		offsetof(struct at91_pm_data, mode));
 	DEFINE(PM_DATA_SHDWC,		offsetof(struct at91_pm_data, shdwc));
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index b683c2caa40b..e5869cca5e79 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -12,6 +12,10 @@
 #include "pm.h"
 #include "pm_data-offsets.h"
 
+#ifdef CONFIG_CPU_V7
+.arch armv7-a
+#endif
+
 #define	SRAMC_SELF_FRESH_ACTIVE		0x01
 #define	SRAMC_SELF_FRESH_EXIT		0x00
 
@@ -22,39 +26,57 @@ tmp3	.req	r6
 
 /*
  * Wait until master clock is ready (after switching master clock source)
+ *
+ * @r_mckid:	register holding master clock identifier
+ *
+ * Side effects: overwrites r7, r8
  */
-	.macro wait_mckrdy
-1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_MCKRDY
-	beq	1b
+	.macro wait_mckrdy r_mckid
+#ifdef CONFIG_SOC_SAMA7
+	cmp	\r_mckid, #0
+	beq	1f
+	mov	r7, #AT91_PMC_MCKXRDY
+	b	2f
+#endif
+1:	mov	r7, #AT91_PMC_MCKRDY
+2:	ldr	r8, [pmc, #AT91_PMC_SR]
+	and	r8, r7
+	cmp	r8, r7
+	bne	2b
 	.endm
 
 /*
  * Wait until master oscillator has stabilized.
+ *
+ * Side effects: overwrites r7
  */
 	.macro wait_moscrdy
-1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_MOSCS
+1:	ldr	r7, [pmc, #AT91_PMC_SR]
+	tst	r7, #AT91_PMC_MOSCS
 	beq	1b
 	.endm
 
 /*
  * Wait for main oscillator selection is done
+ *
+ * Side effects: overwrites r7
  */
 	.macro wait_moscsels
-1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_MOSCSELS
+1:	ldr	r7, [pmc, #AT91_PMC_SR]
+	tst	r7, #AT91_PMC_MOSCSELS
 	beq	1b
 	.endm
 
 /*
  * Put the processor to enter the idle state
+ *
+ * Side effects: overwrites r7
  */
 	.macro at91_cpu_idle
 
 #if defined(CONFIG_CPU_V7)
-	mov	tmp1, #AT91_PMC_PCK
-	str	tmp1, [pmc, #AT91_PMC_SCDR]
+	mov	r7, #AT91_PMC_PCK
+	str	r7, [pmc, #AT91_PMC_SCDR]
 
 	dsb
 
@@ -65,102 +87,390 @@ tmp3	.req	r6
 
 	.endm
 
+/**
+ * Set state for 2.5V low power regulator
+ * @ena: 0 - disable regulator
+ *	 1 - enable regulator
+ *
+ * Side effects: overwrites r7, r8, r9, r10
+ */
+	.macro at91_2_5V_reg_set_low_power ena
+#ifdef CONFIG_SOC_SAMA7
+	ldr	r7, .sfrbu
+	mov	r8, #\ena
+	ldr	r9, [r7, #AT91_SFRBU_25LDOCR]
+	orr	r9, r9, #AT91_SFRBU_25LDOCR_LP
+	cmp	r8, #1
+	beq	lp_done_\ena
+	bic	r9, r9, #AT91_SFRBU_25LDOCR_LP
+lp_done_\ena:
+	ldr	r10, =AT91_SFRBU_25LDOCR_LDOANAKEY
+	orr	r9, r9, r10
+	str	r9, [r7, #AT91_SFRBU_25LDOCR]
+#endif
+	.endm
+
+	.macro at91_backup_set_lpm reg
+#ifdef CONFIG_SOC_SAMA7
+	orr	\reg, \reg, #0x200000
+#endif
+	.endm
+
 	.text
 
 	.arm
 
-/*
- * void at91_suspend_sram_fn(struct at91_pm_data*)
- * @input param:
- * 	@r0: base address of struct at91_pm_data
+#ifdef CONFIG_SOC_SAMA7
+/**
+ * Enable self-refresh
+ *
+ * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3, r7
  */
-/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
-	.align 3
-ENTRY(at91_pm_suspend_in_sram)
-	/* Save registers on stack */
-	stmfd	sp!, {r4 - r12, lr}
+.macro at91_sramc_self_refresh_ena
+	ldr	r2, .sramc_base
+	ldr	r3, .sramc_phy_base
+	ldr	r7, .pm_mode
 
-	/* Drain write buffer */
+	dsb
+
+	/* Disable all AXI ports. */
+	ldr	tmp1, [r2, #UDDRC_PCTRL_0]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_0]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_1]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_1]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_2]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_2]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_3]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_3]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_4]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_4]
+
+sr_ena_1:
+	/* Wait for all ports to disable. */
+	ldr	tmp1, [r2, #UDDRC_PSTAT]
+	ldr	tmp2, =UDDRC_PSTAT_ALL_PORTS
+	tst	tmp1, tmp2
+	bne	sr_ena_1
+
+	/* Switch to self-refresh. */
+	ldr	tmp1, [r2, #UDDRC_PWRCTL]
+	orr	tmp1, tmp1, #UDDRC_PWRCTL_SELFREF_SW
+	str	tmp1, [r2, #UDDRC_PWRCTL]
+
+sr_ena_2:
+	/* Wait for self-refresh enter. */
+	ldr	tmp1, [r2, #UDDRC_STAT]
+	bic	tmp1, tmp1, #~UDDRC_STAT_SELFREF_TYPE_MSK
+	cmp	tmp1, #UDDRC_STAT_SELFREF_TYPE_SW
+	bne	sr_ena_2
+
+	/* Disable DX DLLs for non-backup modes. */
+	cmp	r7, #AT91_PM_BACKUP
+	beq	sr_ena_3
+
+	/* Do not soft reset the AC DLL. */
+	ldr	tmp1, [r3, DDR3PHY_ACDLLCR]
+	bic	tmp1, tmp1, DDR3PHY_ACDLLCR_DLLSRST
+	str	tmp1, [r3, DDR3PHY_ACDLLCR]
+
+	/* Disable DX DLLs. */
+	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+	ldr	tmp1, [r3, #DDR3PHY_DX1DLLCR]
+	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX1DLLCR]
+
+sr_ena_3:
+	/* Power down DDR PHY data receivers. */
+	ldr	tmp1, [r3, #DDR3PHY_DXCCR]
+	orr	tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR
+	str	tmp1, [r3, #DDR3PHY_DXCCR]
+
+	/* Power down ADDR/CMD IO. */
+	ldr	tmp1, [r3, #DDR3PHY_ACIOCR]
+	orr	tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD
+	orr	tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0
+	orr	tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0
+	str	tmp1, [r3, #DDR3PHY_ACIOCR]
+
+	/* Power down ODT. */
+	ldr	tmp1, [r3, #DDR3PHY_DSGCR]
+	orr	tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
+	str	tmp1, [r3, #DDR3PHY_DSGCR]
+.endm
+
+/**
+ * Disable self-refresh
+ *
+ * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3
+ */
+.macro at91_sramc_self_refresh_dis
+	ldr	r2, .sramc_base
+	ldr	r3, .sramc_phy_base
+
+	/* Power up DDR PHY data receivers. */
+	ldr	tmp1, [r3, #DDR3PHY_DXCCR]
+	bic	tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR
+	str	tmp1, [r3, #DDR3PHY_DXCCR]
+
+	/* Power up the output of CK and CS pins. */
+	ldr	tmp1, [r3, #DDR3PHY_ACIOCR]
+	bic	tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD
+	bic	tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0
+	bic	tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0
+	str	tmp1, [r3, #DDR3PHY_ACIOCR]
+
+	/* Power up ODT. */
+	ldr	tmp1, [r3, #DDR3PHY_DSGCR]
+	bic	tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
+	str	tmp1, [r3, #DDR3PHY_DSGCR]
+
+	/* Enable DX DLLs. */
+	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+	bic	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+	ldr	tmp1, [r3, #DDR3PHY_DX1DLLCR]
+	bic	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX1DLLCR]
+
+	/* Enable quasi-dynamic programming. */
 	mov	tmp1, #0
-	mcr	p15, 0, tmp1, c7, c10, 4
+	str	tmp1, [r2, #UDDRC_SWCTRL]
+
+	/* De-assert SDRAM initialization. */
+	ldr	tmp1, [r2, #UDDRC_DFIMISC]
+	bic	tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN
+	str	tmp1, [r2, #UDDRC_DFIMISC]
+
+	/* Quasi-dynamic programming done. */
+	mov	tmp1, #UDDRC_SWCTRL_SW_DONE
+	str	tmp1, [r2, #UDDRC_SWCTRL]
+
+sr_dis_1:
+	ldr	tmp1, [r2, #UDDRC_SWSTAT]
+	tst	tmp1, #UDDRC_SWSTAT_SW_DONE_ACK
+	beq	sr_dis_1
+
+	/* DLL soft-reset + DLL lock wait + ITM reset */
+	mov	tmp1, #(DDR3PHY_PIR_INIT | DDR3PHY_PIR_DLLSRST | \
+			DDR3PHY_PIR_DLLLOCK | DDR3PHY_PIR_ITMSRST)
+	str	tmp1, [r3, #DDR3PHY_PIR]
+
+sr_dis_4:
+	/* Wait for it. */
+	ldr	tmp1, [r3, #DDR3PHY_PGSR]
+	tst	tmp1, #DDR3PHY_PGSR_IDONE
+	beq	sr_dis_4
+
+	/* Enable quasi-dynamic programming. */
+	mov	tmp1, #0
+	str	tmp1, [r2, #UDDRC_SWCTRL]
+
+	/* Assert PHY init complete enable signal. */
+	ldr	tmp1, [r2, #UDDRC_DFIMISC]
+	orr	tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN
+	str	tmp1, [r2, #UDDRC_DFIMISC]
+
+	/* Programming is done. Set sw_done. */
+	mov	tmp1, #UDDRC_SWCTRL_SW_DONE
+	str	tmp1, [r2, #UDDRC_SWCTRL]
+
+sr_dis_5:
+	/* Wait for it. */
+	ldr	tmp1, [r2, #UDDRC_SWSTAT]
+	tst	tmp1, #UDDRC_SWSTAT_SW_DONE_ACK
+	beq	sr_dis_5
+
+	/* Trigger self-refresh exit. */
+	ldr	tmp1, [r2, #UDDRC_PWRCTL]
+	bic	tmp1, tmp1, #UDDRC_PWRCTL_SELFREF_SW
+	str	tmp1, [r2, #UDDRC_PWRCTL]
+
+sr_dis_6:
+	/* Wait for self-refresh exit done. */
+	ldr	tmp1, [r2, #UDDRC_STAT]
+	bic	tmp1, tmp1, #~UDDRC_STAT_OPMODE_MSK
+	cmp	tmp1, #UDDRC_STAT_OPMODE_NORMAL
+	bne	sr_dis_6
+
+	/* Enable all AXI ports. */
+	ldr	tmp1, [r2, #UDDRC_PCTRL_0]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_0]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_1]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_1]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_2]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_2]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_3]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_3]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_4]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_4]
 
-	ldr	tmp1, [r0, #PM_DATA_PMC]
-	str	tmp1, .pmc_base
-	ldr	tmp1, [r0, #PM_DATA_RAMC0]
-	str	tmp1, .sramc_base
-	ldr	tmp1, [r0, #PM_DATA_RAMC1]
-	str	tmp1, .sramc1_base
-	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
-	str	tmp1, .memtype
-	ldr	tmp1, [r0, #PM_DATA_MODE]
-	str	tmp1, .pm_mode
-	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
-	str	tmp1, .mckr_offset
-	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
-	str	tmp1, .pmc_version
-	/* Both ldrne below are here to preload their address in the TLB */
-	ldr	tmp1, [r0, #PM_DATA_SHDWC]
-	str	tmp1, .shdwc
-	cmp	tmp1, #0
-	ldrne	tmp2, [tmp1, #0]
-	ldr	tmp1, [r0, #PM_DATA_SFRBU]
-	str	tmp1, .sfrbu
-	cmp	tmp1, #0
-	ldrne	tmp2, [tmp1, #0x10]
+	dsb
+.endm
+#else
+/**
+ * Enable self-refresh
+ *
+ * register usage:
+ * 	@r1: memory type
+ *	@r2: base address of the sram controller
+ *	@r3: temporary
+ */
+.macro at91_sramc_self_refresh_ena
+	ldr	r1, .memtype
+	ldr	r2, .sramc_base
 
-	/* Active the self-refresh mode */
-	mov	r0, #SRAMC_SELF_FRESH_ACTIVE
-	bl	at91_sramc_self_refresh
+	cmp	r1, #AT91_MEMCTRL_MC
+	bne	sr_ena_ddrc_sf
 
-	ldr	r0, .pm_mode
-	cmp	r0, #AT91_PM_STANDBY
-	beq	standby
-	cmp	r0, #AT91_PM_BACKUP
-	beq	backup_mode
+	/* Active SDRAM self-refresh mode */
+	mov	r3, #1
+	str	r3, [r2, #AT91_MC_SDRAMC_SRR]
+	b	sr_ena_exit
 
-	bl	at91_ulp_mode
-	b	exit_suspend
+sr_ena_ddrc_sf:
+	cmp	r1, #AT91_MEMCTRL_DDRSDR
+	bne	sr_ena_sdramc_sf
 
-standby:
-	/* Wait for interrupt */
-	ldr	pmc, .pmc_base
-	at91_cpu_idle
-	b	exit_suspend
+	/*
+	 * DDR Memory controller
+	 */
 
-backup_mode:
-	bl	at91_backup_mode
-	b	exit_suspend
+	/* LPDDR1 --> force DDR2 mode during self-refresh */
+	ldr	r3, [r2, #AT91_DDRSDRC_MDR]
+	str	r3, .saved_sam9_mdr
+	bic	r3, r3, #~AT91_DDRSDRC_MD
+	cmp	r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	r3, [r2, #AT91_DDRSDRC_MDR]
+	biceq	r3, r3, #AT91_DDRSDRC_MD
+	orreq	r3, r3, #AT91_DDRSDRC_MD_DDR2
+	streq	r3, [r2, #AT91_DDRSDRC_MDR]
 
-exit_suspend:
-	/* Exit the self-refresh mode */
-	mov	r0, #SRAMC_SELF_FRESH_EXIT
-	bl	at91_sramc_self_refresh
+	/* Active DDRC self-refresh mode */
+	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
+	str	r3, .saved_sam9_lpr
+	bic	r3, r3, #AT91_DDRSDRC_LPCB
+	orr	r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
 
-	/* Restore registers, and return */
-	ldmfd	sp!, {r4 - r12, pc}
-ENDPROC(at91_pm_suspend_in_sram)
+	/* If using the 2nd ddr controller */
+	ldr	r2, .sramc1_base
+	cmp	r2, #0
+	beq	sr_ena_no_2nd_ddrc
 
-ENTRY(at91_backup_mode)
-	/* Switch the master clock source to slow clock. */
-	ldr	pmc, .pmc_base
-	ldr	tmp2, .mckr_offset
-	ldr	tmp1, [pmc, tmp2]
-	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, tmp2]
+	ldr	r3, [r2, #AT91_DDRSDRC_MDR]
+	str	r3, .saved_sam9_mdr1
+	bic	r3, r3, #~AT91_DDRSDRC_MD
+	cmp	r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	r3, [r2, #AT91_DDRSDRC_MDR]
+	biceq	r3, r3, #AT91_DDRSDRC_MD
+	orreq	r3, r3, #AT91_DDRSDRC_MD_DDR2
+	streq	r3, [r2, #AT91_DDRSDRC_MDR]
 
-	wait_mckrdy
+	/* Active DDRC self-refresh mode */
+	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
+	str	r3, .saved_sam9_lpr1
+	bic	r3, r3, #AT91_DDRSDRC_LPCB
+	orr	r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
 
-	/*BUMEN*/
-	ldr	r0, .sfrbu
-	mov	tmp1, #0x1
-	str	tmp1, [r0, #0x10]
+sr_ena_no_2nd_ddrc:
+	b	sr_ena_exit
 
-	/* Shutdown */
-	ldr	r0, .shdwc
-	mov	tmp1, #0xA5000000
-	add	tmp1, tmp1, #0x1
-	str	tmp1, [r0, #0]
-ENDPROC(at91_backup_mode)
+	/*
+	 * SDRAMC Memory controller
+	 */
+sr_ena_sdramc_sf:
+	/* Active SDRAMC self-refresh mode */
+	ldr	r3, [r2, #AT91_SDRAMC_LPR]
+	str	r3, .saved_sam9_lpr
+	bic	r3, r3, #AT91_SDRAMC_LPCB
+	orr	r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_SDRAMC_LPR]
+
+	ldr	r3, .saved_sam9_lpr
+	str	r3, [r2, #AT91_SDRAMC_LPR]
+
+sr_ena_exit:
+.endm
+
+/**
+ * Disable self-refresh
+ *
+ * register usage:
+ * 	@r1: memory type
+ *	@r2: base address of the sram controller
+ *	@r3: temporary
+ */
+.macro at91_sramc_self_refresh_dis
+	ldr	r1, .memtype
+	ldr	r2, .sramc_base
+
+	cmp	r1, #AT91_MEMCTRL_MC
+	bne	sr_dis_ddrc_exit_sf
+
+	/*
+	 * at91rm9200 Memory controller
+	 */
+
+	 /*
+	  * For exiting the self-refresh mode, do nothing,
+	  * automatically exit the self-refresh mode.
+	  */
+	b	sr_dis_exit
+
+sr_dis_ddrc_exit_sf:
+	cmp	r1, #AT91_MEMCTRL_DDRSDR
+	bne	sdramc_exit_sf
+
+	/* DDR Memory controller */
+
+	/* Restore MDR in case of LPDDR1 */
+	ldr	r3, .saved_sam9_mdr
+	str	r3, [r2, #AT91_DDRSDRC_MDR]
+	/* Restore LPR on AT91 with DDRAM */
+	ldr	r3, .saved_sam9_lpr
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
+
+	/* If using the 2nd ddr controller */
+	ldr	r2, .sramc1_base
+	cmp	r2, #0
+	ldrne	r3, .saved_sam9_mdr1
+	strne	r3, [r2, #AT91_DDRSDRC_MDR]
+	ldrne	r3, .saved_sam9_lpr1
+	strne	r3, [r2, #AT91_DDRSDRC_LPR]
+
+	b	sr_dis_exit
+
+sdramc_exit_sf:
+	/* SDRAMC Memory controller */
+	ldr	r3, .saved_sam9_lpr
+	str	r3, [r2, #AT91_SDRAMC_LPR]
+
+sr_dis_exit:
+.endm
+#endif
 
 .macro at91_pm_ulp0_mode
 	ldr	pmc, .pmc_base
@@ -176,7 +486,9 @@ ENDPROC(at91_backup_mode)
 	bic	tmp1, tmp1, #AT91_PMC_PRES
 	orr	tmp1, tmp1, #AT91_PMC_PRES_64
 	str	tmp1, [pmc, tmp3]
-	wait_mckrdy
+
+	mov	tmp3, #0
+	wait_mckrdy tmp3
 	b	1f
 
 0:
@@ -212,10 +524,13 @@ ENDPROC(at91_backup_mode)
 	bne	5f
 
 	/* Set lowest prescaler for fast resume. */
+	ldr	tmp3, .mckr_offset
 	ldr	tmp1, [pmc, tmp3]
 	bic	tmp1, tmp1, #AT91_PMC_PRES
 	str	tmp1, [pmc, tmp3]
-	wait_mckrdy
+
+	mov	tmp3, #0
+	wait_mckrdy tmp3
 	b	6f
 
 5:	/* Restore RC oscillator state */
@@ -252,6 +567,7 @@ ENDPROC(at91_backup_mode)
 .macro at91_pm_ulp1_mode
 	ldr	pmc, .pmc_base
 	ldr	tmp2, .mckr_offset
+	mov	tmp3, #0
 
 	/* Save RC oscillator state and check if it is enabled. */
 	ldr	tmp1, [pmc, #AT91_PMC_SR]
@@ -293,7 +609,7 @@ ENDPROC(at91_backup_mode)
 	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
 	str	tmp1, [pmc, tmp2]
 
-	wait_mckrdy
+	wait_mckrdy tmp3
 
 	/* Enter the ULP1 mode by set WAITMODE bit in CKGR_MOR */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
@@ -306,7 +622,7 @@ ENDPROC(at91_backup_mode)
 	nop
 	nop
 
-	wait_mckrdy
+	wait_mckrdy tmp3
 
 	/* Enable the crystal oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
@@ -322,7 +638,7 @@ ENDPROC(at91_backup_mode)
 	bic	tmp1, tmp1, #AT91_PMC_CSS
 	str	tmp1, [pmc, tmp2]
 
-	wait_mckrdy
+	wait_mckrdy tmp3
 
 	/* Switch main clock source to crystal oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
@@ -339,7 +655,7 @@ ENDPROC(at91_backup_mode)
 	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
 	str	tmp1, [pmc, tmp2]
 
-	wait_mckrdy
+	wait_mckrdy tmp3
 
 	/* Restore RC oscillator state */
 	ldr	tmp1, .saved_osc_status
@@ -367,7 +683,7 @@ ENDPROC(at91_backup_mode)
 	cmp	tmp1, #AT91_PMC_V1
 	beq	1f
 
-#ifdef CONFIG_SOC_SAM9X60
+#ifdef CONFIG_HAVE_AT91_SAM9X60_PLL
 	/* Save PLLA settings. */
 	ldr	tmp2, [pmc, #AT91_PMC_PLL_UPDT]
 	bic	tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID
@@ -434,7 +750,7 @@ ENDPROC(at91_backup_mode)
 	cmp	tmp3, #AT91_PMC_V1
 	beq	4f
 
-#ifdef CONFIG_SOC_SAM9X60
+#ifdef CONFIG_HAVE_AT91_SAM9X60_PLL
 	/* step 1. */
 	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
 	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
@@ -497,7 +813,122 @@ ENDPROC(at91_backup_mode)
 2:
 .endm
 
-ENTRY(at91_ulp_mode)
+/**
+ * at91_mckx_ps_enable:	save MCK1..4 settings and switch it to main clock
+ *
+ * Side effects: overwrites tmp1, tmp2
+ */
+.macro at91_mckx_ps_enable
+#ifdef CONFIG_SOC_SAMA7
+	ldr	pmc, .pmc_base
+
+	/* There are 4 MCKs we need to handle: MCK1..4 */
+	mov	tmp1, #1
+e_loop:	cmp	tmp1, #5
+	beq	e_done
+
+	/* Write MCK ID to retrieve the settings. */
+	str	tmp1, [pmc, #AT91_PMC_MCR_V2]
+	ldr	tmp2, [pmc, #AT91_PMC_MCR_V2]
+
+e_save_mck1:
+	cmp	tmp1, #1
+	bne	e_save_mck2
+	str	tmp2, .saved_mck1
+	b	e_ps
+
+e_save_mck2:
+	cmp	tmp1, #2
+	bne	e_save_mck3
+	str	tmp2, .saved_mck2
+	b	e_ps
+
+e_save_mck3:
+	cmp	tmp1, #3
+	bne	e_save_mck4
+	str	tmp2, .saved_mck3
+	b	e_ps
+
+e_save_mck4:
+	str	tmp2, .saved_mck4
+
+e_ps:
+	/* Use CSS=MAINCK and DIV=1. */
+	bic	tmp2, tmp2, #AT91_PMC_MCR_V2_CSS
+	bic	tmp2, tmp2, #AT91_PMC_MCR_V2_DIV
+	orr	tmp2, tmp2, #AT91_PMC_MCR_V2_CSS_MAINCK
+	orr	tmp2, tmp2, #AT91_PMC_MCR_V2_DIV1
+	str	tmp2, [pmc, #AT91_PMC_MCR_V2]
+
+	wait_mckrdy tmp1
+
+	add	tmp1, tmp1, #1
+	b	e_loop
+
+e_done:
+#endif
+.endm
+
+/**
+ * at91_mckx_ps_restore: restore MCK1..4 settings
+ *
+ * Side effects: overwrites tmp1, tmp2
+ */
+.macro at91_mckx_ps_restore
+#ifdef CONFIG_SOC_SAMA7
+	ldr	pmc, .pmc_base
+
+	/* There are 4 MCKs we need to handle: MCK1..4 */
+	mov	tmp1, #1
+r_loop:	cmp	tmp1, #5
+	beq	r_done
+
+r_save_mck1:
+	cmp	tmp1, #1
+	bne	r_save_mck2
+	ldr	tmp2, .saved_mck1
+	b	r_ps
+
+r_save_mck2:
+	cmp	tmp1, #2
+	bne	r_save_mck3
+	ldr	tmp2, .saved_mck2
+	b	r_ps
+
+r_save_mck3:
+	cmp	tmp1, #3
+	bne	r_save_mck4
+	ldr	tmp2, .saved_mck3
+	b	r_ps
+
+r_save_mck4:
+	ldr	tmp2, .saved_mck4
+
+r_ps:
+	/* Write MCK ID to retrieve the settings. */
+	str	tmp1, [pmc, #AT91_PMC_MCR_V2]
+	ldr	tmp3, [pmc, #AT91_PMC_MCR_V2]
+
+	/* We need to restore CSS and DIV. */
+	bic	tmp3, tmp3, #AT91_PMC_MCR_V2_CSS
+	bic	tmp3, tmp3, #AT91_PMC_MCR_V2_DIV
+	orr	tmp3, tmp3, tmp2
+	bic	tmp3, tmp3, #AT91_PMC_MCR_V2_ID_MSK
+	orr	tmp3, tmp3, tmp1
+	orr	tmp3, tmp3, #AT91_PMC_MCR_V2_CMD
+	str	tmp2, [pmc, #AT91_PMC_MCR_V2]
+
+	wait_mckrdy tmp1
+
+	add	tmp1, tmp1, #1
+	b	r_loop
+r_done:
+#endif
+.endm
+
+.macro at91_ulp_mode
+	at91_mckx_ps_enable
+
 	ldr	pmc, .pmc_base
 	ldr	tmp2, .mckr_offset
 	ldr	tmp3, .pm_mode
@@ -518,10 +949,15 @@ ENTRY(at91_ulp_mode)
 save_mck:
 	str	tmp1, [pmc, tmp2]
 
-	wait_mckrdy
+	mov	tmp3, #0
+	wait_mckrdy tmp3
 
 	at91_plla_disable
 
+	/* Enable low power mode for 2.5V regulator. */
+	at91_2_5V_reg_set_low_power 1
+
+	ldr	tmp3, .pm_mode
 	cmp	tmp3, #AT91_PM_ULP1
 	beq	ulp1_mode
 
@@ -533,6 +969,9 @@ ulp1_mode:
 	b	ulp_exit
 
 ulp_exit:
+	/* Disable low power mode for 2.5V regulator. */
+	at91_2_5V_reg_set_low_power 0
+
 	ldr	pmc, .pmc_base
 
 	at91_plla_enable
@@ -544,135 +983,134 @@ ulp_exit:
 	ldr	tmp2, .saved_mckr
 	str	tmp2, [pmc, tmp1]
 
-	wait_mckrdy
+	mov	tmp3, #0
+	wait_mckrdy tmp3
 
-	mov	pc, lr
-ENDPROC(at91_ulp_mode)
+	at91_mckx_ps_restore
+.endm
 
-/*
- * void at91_sramc_self_refresh(unsigned int is_active)
- *
- * @input param:
- *	@r0: 1 - active self-refresh mode
- *	     0 - exit self-refresh mode
- * register usage:
- * 	@r1: memory type
- *	@r2: base address of the sram controller
- */
+.macro at91_backup_mode
+	/* Switch the master clock source to slow clock. */
+	ldr	pmc, .pmc_base
+	ldr	tmp2, .mckr_offset
+	ldr	tmp1, [pmc, tmp2]
+	bic	tmp1, tmp1, #AT91_PMC_CSS
+	str	tmp1, [pmc, tmp2]
 
-ENTRY(at91_sramc_self_refresh)
-	ldr	r1, .memtype
-	ldr	r2, .sramc_base
+	mov	tmp3, #0
+	wait_mckrdy tmp3
 
-	cmp	r1, #AT91_MEMCTRL_MC
-	bne	ddrc_sf
+	/*BUMEN*/
+	ldr	r0, .sfrbu
+	mov	tmp1, #0x1
+	str	tmp1, [r0, #0x10]
 
-	/*
-	 * at91rm9200 Memory controller
-	 */
+	/* Wait for it. */
+1:	ldr	tmp1, [r0, #0x10]
+	tst	tmp1, #0x1
+	beq	1b
 
-	 /*
-	  * For exiting the self-refresh mode, do nothing,
-	  * automatically exit the self-refresh mode.
-	  */
-	tst	r0, #SRAMC_SELF_FRESH_ACTIVE
-	beq	exit_sramc_sf
+	/* Shutdown */
+	ldr	r0, .shdwc
+	mov	tmp1, #0xA5000000
+	add	tmp1, tmp1, #0x1
+	at91_backup_set_lpm tmp1
+	str	tmp1, [r0, #0]
+.endm
 
-	/* Active SDRAM self-refresh mode */
-	mov	r3, #1
-	str	r3, [r2, #AT91_MC_SDRAMC_SRR]
-	b	exit_sramc_sf
+/*
+ * void at91_suspend_sram_fn(struct at91_pm_data*)
+ * @input param:
+ * 	@r0: base address of struct at91_pm_data
+ */
+/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
+	.align 3
+ENTRY(at91_pm_suspend_in_sram)
+	/* Save registers on stack */
+	stmfd	sp!, {r4 - r12, lr}
 
-ddrc_sf:
-	cmp	r1, #AT91_MEMCTRL_DDRSDR
-	bne	sdramc_sf
+	/* Drain write buffer */
+	mov	tmp1, #0
+	mcr	p15, 0, tmp1, c7, c10, 4
+
+	/* Flush tlb. */
+	mov	r4, #0
+	mcr	p15, 0, r4, c8, c7, 0
+
+	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
+	str	tmp1, .mckr_offset
+	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
+	str	tmp1, .pmc_version
+	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
+	str	tmp1, .memtype
+	ldr	tmp1, [r0, #PM_DATA_MODE]
+	str	tmp1, .pm_mode
 
 	/*
-	 * DDR Memory controller
+	 * ldrne below are here to preload their address in the TLB as access
+	 * to RAM may be limited while in self-refresh.
 	 */
-	tst	r0, #SRAMC_SELF_FRESH_ACTIVE
-	beq	ddrc_exit_sf
-
-	/* LPDDR1 --> force DDR2 mode during self-refresh */
-	ldr	r3, [r2, #AT91_DDRSDRC_MDR]
-	str	r3, .saved_sam9_mdr
-	bic	r3, r3, #~AT91_DDRSDRC_MD
-	cmp	r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
-	ldreq	r3, [r2, #AT91_DDRSDRC_MDR]
-	biceq	r3, r3, #AT91_DDRSDRC_MD
-	orreq	r3, r3, #AT91_DDRSDRC_MD_DDR2
-	streq	r3, [r2, #AT91_DDRSDRC_MDR]
+	ldr	tmp1, [r0, #PM_DATA_PMC]
+	str	tmp1, .pmc_base
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
 
-	/* Active DDRC self-refresh mode */
-	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
-	str	r3, .saved_sam9_lpr
-	bic	r3, r3, #AT91_DDRSDRC_LPCB
-	orr	r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-	str	r3, [r2, #AT91_DDRSDRC_LPR]
+	ldr	tmp1, [r0, #PM_DATA_RAMC0]
+	str	tmp1, .sramc_base
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
 
-	/* If using the 2nd ddr controller */
-	ldr	r2, .sramc1_base
-	cmp	r2, #0
-	beq	no_2nd_ddrc
+	ldr	tmp1, [r0, #PM_DATA_RAMC1]
+	str	tmp1, .sramc1_base
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
 
-	ldr	r3, [r2, #AT91_DDRSDRC_MDR]
-	str	r3, .saved_sam9_mdr1
-	bic	r3, r3, #~AT91_DDRSDRC_MD
-	cmp	r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
-	ldreq	r3, [r2, #AT91_DDRSDRC_MDR]
-	biceq	r3, r3, #AT91_DDRSDRC_MD
-	orreq	r3, r3, #AT91_DDRSDRC_MD_DDR2
-	streq	r3, [r2, #AT91_DDRSDRC_MDR]
+#ifndef CONFIG_SOC_SAM_V4_V5
+	/* ldrne below are here to preload their address in the TLB */
+	ldr	tmp1, [r0, #PM_DATA_RAMC_PHY]
+	str	tmp1, .sramc_phy_base
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
 
-	/* Active DDRC self-refresh mode */
-	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
-	str	r3, .saved_sam9_lpr1
-	bic	r3, r3, #AT91_DDRSDRC_LPCB
-	orr	r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-	str	r3, [r2, #AT91_DDRSDRC_LPR]
+	ldr	tmp1, [r0, #PM_DATA_SHDWC]
+	str	tmp1, .shdwc
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
 
-no_2nd_ddrc:
-	b	exit_sramc_sf
+	ldr	tmp1, [r0, #PM_DATA_SFRBU]
+	str	tmp1, .sfrbu
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0x10]
+#endif
 
-ddrc_exit_sf:
-	/* Restore MDR in case of LPDDR1 */
-	ldr	r3, .saved_sam9_mdr
-	str	r3, [r2, #AT91_DDRSDRC_MDR]
-	/* Restore LPR on AT91 with DDRAM */
-	ldr	r3, .saved_sam9_lpr
-	str	r3, [r2, #AT91_DDRSDRC_LPR]
+	/* Active the self-refresh mode */
+	at91_sramc_self_refresh_ena
 
-	/* If using the 2nd ddr controller */
-	ldr	r2, .sramc1_base
-	cmp	r2, #0
-	ldrne	r3, .saved_sam9_mdr1
-	strne	r3, [r2, #AT91_DDRSDRC_MDR]
-	ldrne	r3, .saved_sam9_lpr1
-	strne	r3, [r2, #AT91_DDRSDRC_LPR]
+	ldr	r0, .pm_mode
+	cmp	r0, #AT91_PM_STANDBY
+	beq	standby
+	cmp	r0, #AT91_PM_BACKUP
+	beq	backup_mode
 
-	b	exit_sramc_sf
+	at91_ulp_mode
+	b	exit_suspend
 
-	/*
-	 * SDRAMC Memory controller
-	 */
-sdramc_sf:
-	tst	r0, #SRAMC_SELF_FRESH_ACTIVE
-	beq	sdramc_exit_sf
+standby:
+	/* Wait for interrupt */
+	ldr	pmc, .pmc_base
+	at91_cpu_idle
+	b	exit_suspend
 
-	/* Active SDRAMC self-refresh mode */
-	ldr	r3, [r2, #AT91_SDRAMC_LPR]
-	str	r3, .saved_sam9_lpr
-	bic	r3, r3, #AT91_SDRAMC_LPCB
-	orr	r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
-	str	r3, [r2, #AT91_SDRAMC_LPR]
+backup_mode:
+	at91_backup_mode
 
-sdramc_exit_sf:
-	ldr	r3, .saved_sam9_lpr
-	str	r3, [r2, #AT91_SDRAMC_LPR]
+exit_suspend:
+	/* Exit the self-refresh mode */
+	at91_sramc_self_refresh_dis
 
-exit_sramc_sf:
-	mov	pc, lr
-ENDPROC(at91_sramc_self_refresh)
+	/* Restore registers, and return */
+	ldmfd	sp!, {r4 - r12, pc}
+ENDPROC(at91_pm_suspend_in_sram)
 
 .pmc_base:
 	.word 0
@@ -680,6 +1118,8 @@ ENDPROC(at91_sramc_self_refresh)
 	.word 0
 .sramc1_base:
 	.word 0
+.sramc_phy_base:
+	.word 0
 .shdwc:
 	.word 0
 .sfrbu:
@@ -706,6 +1146,16 @@ ENDPROC(at91_sramc_self_refresh)
 	.word 0
 .saved_osc_status:
 	.word 0
+#ifdef CONFIG_SOC_SAMA7
+.saved_mck1:
+	.word 0
+.saved_mck2:
+	.word 0
+.saved_mck3:
+	.word 0
+.saved_mck4:
+	.word 0
+#endif
 
 ENTRY(at91_pm_suspend_in_sram_sz)
 	.word .-at91_pm_suspend_in_sram
diff --git a/arch/arm/mach-at91/sam_secure.c b/arch/arm/mach-at91/sam_secure.c
new file mode 100644
index 000000000000..f7789cbe289f
--- /dev/null
+++ b/arch/arm/mach-at91/sam_secure.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2022, Microchip
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/of.h>
+
+#include "sam_secure.h"
+
+static bool optee_available;
+
+#define SAM_SIP_SMC_STD_CALL_VAL(func_num) \
+	ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_32, \
+	ARM_SMCCC_OWNER_SIP, (func_num))
+
+struct arm_smccc_res sam_smccc_call(u32 fn, u32 arg0, u32 arg1)
+{
+	struct arm_smccc_res res = {.a0 = -1};
+
+	if (WARN_ON(!optee_available))
+		return res;
+
+	arm_smccc_smc(SAM_SIP_SMC_STD_CALL_VAL(fn), arg0, arg1, 0, 0, 0, 0, 0,
+		      &res);
+
+	return res;
+}
+
+bool sam_linux_is_optee_available(void)
+{
+	/* If optee has been detected, then we are running in normal world */
+	return optee_available;
+}
+
+void __init sam_secure_init(void)
+{
+	struct device_node *np;
+
+	/*
+	 * We only check that the OP-TEE node is present and available. The
+	 * OP-TEE kernel driver is not needed for the type of interaction made
+	 * with OP-TEE here so the driver's status is not checked.
+	 */
+	np = of_find_node_by_path("/firmware/optee");
+	if (np && of_device_is_available(np))
+		optee_available = true;
+	of_node_put(np);
+
+	if (optee_available)
+		pr_info("Running under OP-TEE firmware\n");
+}
diff --git a/arch/arm/mach-at91/sam_secure.h b/arch/arm/mach-at91/sam_secure.h
new file mode 100644
index 000000000000..1a0b5ebbfc39
--- /dev/null
+++ b/arch/arm/mach-at91/sam_secure.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2022, Microchip
+ */
+
+#ifndef SAM_SECURE_H
+#define SAM_SECURE_H
+
+#include <linux/arm-smccc.h>
+
+/* Secure Monitor mode APIs */
+#define SAMA5_SMC_SIP_SET_SUSPEND_MODE	0x400
+#define SAMA5_SMC_SIP_GET_SUSPEND_MODE	0x401
+
+void __init sam_secure_init(void);
+struct arm_smccc_res sam_smccc_call(u32 fn, u32 arg0, u32 arg1);
+bool sam_linux_is_optee_available(void);
+
+#endif /* SAM_SECURE_H */
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
index 89dab7cf01e8..bf2b5c6a18c6 100644
--- a/arch/arm/mach-at91/sama5.c
+++ b/arch/arm/mach-at91/sama5.c
@@ -9,11 +9,26 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 
+#include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/outercache.h>
 #include <asm/system_misc.h>
 
 #include "generic.h"
+#include "sam_secure.h"
+
+static void sama5_l2c310_write_sec(unsigned long val, unsigned reg)
+{
+	/* OP-TEE configures the L2 cache and does not allow modifying it yet */
+}
+
+static void __init sama5_secure_cache_init(void)
+{
+	sam_secure_init();
+	if (IS_ENABLED(CONFIG_OUTER_CACHE) && sam_linux_is_optee_available())
+		outer_cache.write_sec = sama5_l2c310_write_sec;
+}
 
 static void __init sama5_dt_device_init(void)
 {
@@ -58,6 +73,7 @@ static const char *const sama5d2_compat[] __initconst = {
 DT_MACHINE_START(sama5d2, "Atmel SAMA5")
 	/* Maintainer: Atmel */
 	.init_machine	= sama5d2_init,
+	.init_early	= sama5_secure_cache_init,
 	.dt_compat	= sama5d2_compat,
 	.l2c_aux_mask	= ~0UL,
 MACHINE_END
diff --git a/arch/arm/mach-at91/sama7.c b/arch/arm/mach-at91/sama7.c
new file mode 100644
index 000000000000..bd43733ede18
--- /dev/null
+++ b/arch/arm/mach-at91/sama7.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Setup code for SAMA7
+ *
+ * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
+ *
+ */
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/system_misc.h>
+
+#include "generic.h"
+
+static void __init sama7_dt_device_init(void)
+{
+	of_platform_default_populate(NULL, NULL, NULL);
+	sama7_pm_init();
+}
+
+static const char *const sama7_dt_board_compat[] __initconst = {
+	"microchip,sama7",
+	NULL
+};
+
+DT_MACHINE_START(sama7_dt, "Microchip SAMA7")
+	/* Maintainer: Microchip */
+	.init_machine	= sama7_dt_device_init,
+	.dt_compat	= sama7_dt_board_compat,
+MACHINE_END
+
diff --git a/arch/arm/mach-axxia/platsmp.c b/arch/arm/mach-axxia/platsmp.c
index 512943eae30a..2e203626eda5 100644
--- a/arch/arm/mach-axxia/platsmp.c
+++ b/arch/arm/mach-axxia/platsmp.c
@@ -39,6 +39,7 @@ static int axxia_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		return -ENOENT;
 
 	syscon = of_iomap(syscon_np, 0);
+	of_node_put(syscon_np);
 	if (!syscon)
 		return -ENOMEM;
 
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 2890e61b2b46..8789d93a7c04 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -54,8 +54,6 @@ config ARCH_BCM_NSP
 	select ARM_ERRATA_775420
 	select ARM_ERRATA_764369 if SMP
 	select ARM_TIMER_SP804
-	select THERMAL
-	select THERMAL_OF
 	help
 	  Support for Broadcom Northstar Plus SoC.
 	  Broadcom Northstar Plus family of SoCs are used for switching control
@@ -161,7 +159,6 @@ config ARCH_BCM2835
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
 	select BCM2835_TIMER
-	select BRCMSTB_L2_IRQ
 	select PINCTRL
 	select PINCTRL_BCM2835
 	select MFD_CORE
@@ -183,24 +180,6 @@ config ARCH_BCM_53573
 	  The base chip is BCM53573 and there are some packaging modifications
 	  like BCM47189 and BCM47452.
 
-config ARCH_BCM_63XX
-	bool "Broadcom BCM63xx DSL SoC"
-	depends on ARCH_MULTI_V7
-	depends on MMU
-	select ARCH_HAS_RESET_CONTROLLER
-	select ARM_ERRATA_754322
-	select ARM_ERRATA_764369 if SMP
-	select ARM_GIC
-	select ARM_GLOBAL_TIMER
-	select CACHE_L2X0
-	select HAVE_ARM_ARCH_TIMER
-	select HAVE_ARM_TWD if SMP
-	select HAVE_ARM_SCU if SMP
-	help
-	  This enables support for systems based on Broadcom DSL SoCs.
-	  It currently supports the 'BCM63XX' ARM-based family, which includes
-	  the BCM63138 variant.
-
 config ARCH_BRCMSTB
 	bool "Broadcom BCM7XXX based boards"
 	depends on ARCH_MULTI_V7
@@ -209,9 +188,6 @@ config ARCH_BRCMSTB
 	select ARM_GIC
 	select ARM_ERRATA_798181 if SMP
 	select HAVE_ARM_ARCH_TIMER
-	select BCM7038_L1_IRQ
-	select BRCMSTB_L2_IRQ
-	select BCM7120_L2_IRQ
 	select ZONE_DMA if ARM_LPAE
 	select SOC_BRCMSTB
 	select SOC_BUS
@@ -223,4 +199,58 @@ config ARCH_BRCMSTB
 	  This enables support for Broadcom ARM-based set-top box chipsets,
 	  including the 7445 family of chips.
 
+menuconfig ARCH_BCMBCA
+	bool "Broadcom Broadband Carrier Access (BCA) origin SoC"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based
+	  BCA chipset.
+
+	  This enables support for Broadcom BCA ARM-based broadband chipsets,
+	  including the DSL, PON and Wireless family of chips.
+
+comment "BCMBCA sub platforms"
+
+if ARCH_BCMBCA
+
+config ARCH_BCMBCA_CORTEXA7
+	bool "Cortex-A7 SoCs"
+	help
+	  Say Y if you intend to run the kernel on a Broadcom Broadband ARM A7
+	  based chipset.
+
+	  This enables support for Broadcom BCA ARM A7 broadband chipsets,
+	  including various DSL, PON and Wireless family of chips.
+
+config ARCH_BCMBCA_CORTEXA9
+	bool "Cortex-A9 SoCS"
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369 if SMP
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_GLOBAL_TIMER
+	select CACHE_L2X0
+	select HAVE_ARM_TWD if SMP
+	select HAVE_ARM_SCU if SMP
+	help
+	  Say Y if you intend to run the kernel on a Broadcom Broadband ARM A9
+	  based BCA chipset.
+
+	  This enables support for Broadcom BCA ARM A9 broadband chipset. Currently
+	  only DSL chip BCM63138.
+
+config ARCH_BCMBCA_BRAHMAB15
+	bool "Brahma-B15 SoCs"
+	select ARM_ERRATA_798181 if SMP
+	help
+	  Say Y if you intend to run the kernel on a Broadcom Broadband ARM B15
+	  based BCA chipset.
+
+	  This enables support for Broadcom BCA ARM B15 broadband chipset. Currently
+	  only DSL chip BCM63148.
+
+endif
+
 endif
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 7baa8c9427d5..2e523f29ec3b 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -1,14 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
 #
 # Copyright (C) 2012-2015 Broadcom Corporation
 #
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation version 2.
-#
-# This program is distributed "as is" WITHOUT ANY WARRANTY of any
-# kind, whether express or implied; without even the implied warranty
-# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
 
 # Cygnus
 obj-$(CONFIG_ARCH_BCM_CYGNUS) +=  bcm_cygnus.o
@@ -40,6 +33,7 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
 
 # Support for secure monitor traps
 obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o
+CFLAGS_REMOVE_bcm_kona_smc.o += $(CC_FLAGS_FTRACE)
 
 # BCM2835
 ifeq ($(CONFIG_ARCH_BCM2835),y)
@@ -56,14 +50,13 @@ ifeq ($(CONFIG_ARCH_BCM_5301X),y)
 obj-$(CONFIG_SMP)		+= platsmp.o
 endif
 
-# BCM63XXx
-ifeq ($(CONFIG_ARCH_BCM_63XX),y)
-obj-y				+= bcm63xx.o
-obj-$(CONFIG_SMP)		+= bcm63xx_smp.o bcm63xx_pmb.o
-endif
-
 ifeq ($(CONFIG_ARCH_BRCMSTB),y)
 CFLAGS_platsmp-brcmstb.o	+= -march=armv7-a
 obj-y				+= brcmstb.o
 obj-$(CONFIG_SMP)		+= platsmp-brcmstb.o
 endif
+
+# BCMBCA
+ifeq ($(CONFIG_ARCH_BCMBCA),y)
+obj-$(CONFIG_SMP)		+= bcm63xx_smp.o bcm63xx_pmb.o
+endif
diff --git a/arch/arm/mach-bcm/bcm63xx.c b/arch/arm/mach-bcm/bcm63xx.c
deleted file mode 100644
index c4c66ae51308..000000000000
--- a/arch/arm/mach-bcm/bcm63xx.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-
-static const char * const bcm63xx_dt_compat[] = {
-	"brcm,bcm63138",
-	NULL
-};
-
-DT_MACHINE_START(BCM63XXX_DT, "BCM63xx DSL SoC")
-	.dt_compat	= bcm63xx_dt_compat,
-	.l2c_aux_val	= 0,
-	.l2c_aux_mask	= ~0,
-MACHINE_END
diff --git a/arch/arm/mach-bcm/bcm63xx_pmb.c b/arch/arm/mach-bcm/bcm63xx_pmb.c
index 0e5a05bac3ea..003f1472ab45 100644
--- a/arch/arm/mach-bcm/bcm63xx_pmb.c
+++ b/arch/arm/mach-bcm/bcm63xx_pmb.c
@@ -91,10 +91,10 @@ static int bcm63xx_pmb_get_resources(struct device_node *dn,
 	struct of_phandle_args args;
 	int ret;
 
-	ret = of_property_read_u32(dn, "reg", cpu);
-	if (ret) {
+	*cpu = of_get_cpu_hwid(dn, 0);
+	if (*cpu == ~0U) {
 		pr_err("CPU is missing a reg node\n");
-		return ret;
+		return -ENODEV;
 	}
 
 	ret = of_parse_phandle_with_args(dn, "resets", "#reset-cells",
diff --git a/arch/arm/mach-bcm/bcm63xx_smp.c b/arch/arm/mach-bcm/bcm63xx_smp.c
index 641e1f8fcf5e..18d0ffc621aa 100644
--- a/arch/arm/mach-bcm/bcm63xx_smp.c
+++ b/arch/arm/mach-bcm/bcm63xx_smp.c
@@ -142,8 +142,7 @@ static int bcm63138_smp_boot_secondary(unsigned int cpu,
 	 */
 	ret = bcm63xx_pmb_power_on_cpu(dn);
 	of_node_put(dn);
-	if (ret)
-		goto out;
+
 out:
 	iounmap(bootlut_base);
 
diff --git a/arch/arm/mach-bcm/bcm_cygnus.c b/arch/arm/mach-bcm/bcm_cygnus.c
index 7ae894c7849b..2469b66cc59e 100644
--- a/arch/arm/mach-bcm/bcm_cygnus.c
+++ b/arch/arm/mach-bcm/bcm_cygnus.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
 
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-bcm/bcm_hr2.c b/arch/arm/mach-bcm/bcm_hr2.c
index c104f28995d7..a19cc206ec76 100644
--- a/arch/arm/mach-bcm/bcm_hr2.c
+++ b/arch/arm/mach-bcm/bcm_hr2.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2017 Broadcom
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2017 Broadcom
 
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c
index 43a16f922b53..f236e12d7a59 100644
--- a/arch/arm/mach-bcm/bcm_kona_smc.c
+++ b/arch/arm/mach-bcm/bcm_kona_smc.c
@@ -1,17 +1,5 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <stdarg.h>
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013 Broadcom Corporation
 #include <linux/smp.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
@@ -43,33 +31,23 @@ static const struct of_device_id bcm_kona_smc_ids[] __initconst = {
 int __init bcm_kona_smc_init(void)
 {
 	struct device_node *node;
-	const __be32 *prop_val;
-	u64 prop_size = 0;
-	unsigned long buffer_size;
-	u32 buffer_phys;
+	struct resource res;
+	int ret;
 
 	/* Read buffer addr and size from the device tree node */
 	node = of_find_matching_node(NULL, bcm_kona_smc_ids);
 	if (!node)
 		return -ENODEV;
 
-	prop_val = of_get_address(node, 0, &prop_size, NULL);
-	if (!prop_val)
-		return -EINVAL;
-
-	/* We assume space for four 32-bit arguments */
-	if (prop_size < 4 * sizeof(u32) || prop_size > (u64)ULONG_MAX)
-		return -EINVAL;
-	buffer_size = (unsigned long)prop_size;
-
-	buffer_phys = be32_to_cpup(prop_val);
-	if (!buffer_phys)
+	ret = of_address_to_resource(node, 0, &res);
+	of_node_put(node);
+	if (ret)
 		return -EINVAL;
 
-	bcm_smc_buffer = ioremap(buffer_phys, buffer_size);
+	bcm_smc_buffer = ioremap(res.start, resource_size(&res));
 	if (!bcm_smc_buffer)
 		return -ENOMEM;
-	bcm_smc_buffer_phys = buffer_phys;
+	bcm_smc_buffer_phys = res.start;
 
 	pr_info("Kona Secure API initialized\n");
 
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.h b/arch/arm/mach-bcm/bcm_kona_smc.h
index 2e29ec67e414..17f3811fa543 100644
--- a/arch/arm/mach-bcm/bcm_kona_smc.h
+++ b/arch/arm/mach-bcm/bcm_kona_smc.h
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2013 Broadcom Corporation */
 
 #ifndef BCM_KONA_SMC_H
 #define BCM_KONA_SMC_H
diff --git a/arch/arm/mach-bcm/bcm_nsp.c b/arch/arm/mach-bcm/bcm_nsp.c
index a1101a3d318e..65ed9f8a518a 100644
--- a/arch/arm/mach-bcm/bcm_nsp.c
+++ b/arch/arm/mach-bcm/bcm_nsp.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2015 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2015 Broadcom Corporation
 
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-bcm/board_bcm21664.c b/arch/arm/mach-bcm/board_bcm21664.c
index c5bf01641172..9ce9ed092b09 100644
--- a/arch/arm/mach-bcm/board_bcm21664.c
+++ b/arch/arm/mach-bcm/board_bcm21664.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
 
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-bcm/board_bcm23550.c b/arch/arm/mach-bcm/board_bcm23550.c
index 0ac01debd077..dd6e9cb785e0 100644
--- a/arch/arm/mach-bcm/board_bcm23550.c
+++ b/arch/arm/mach-bcm/board_bcm23550.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2016 Broadcom
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Broadcom
 
 #include <linux/of_platform.h>
 
diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c
index 1238ac801530..91f6d633ee8e 100644
--- a/arch/arm/mach-bcm/board_bcm281xx.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2012-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012-2014 Broadcom Corporation
 
 #include <linux/clocksource.h>
 #include <linux/of_address.h>
diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c
index 5f127d5f1045..2e3385ced82a 100644
--- a/arch/arm/mach-bcm/brcmstb.c
+++ b/arch/arm/mach-bcm/brcmstb.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013-2014 Broadcom Corporation
 
 #include <linux/init.h>
 #include <linux/irqchip.h>
diff --git a/arch/arm/mach-bcm/kona_l2_cache.c b/arch/arm/mach-bcm/kona_l2_cache.c
index 59ad86304092..457c66e1d7ae 100644
--- a/arch/arm/mach-bcm/kona_l2_cache.c
+++ b/arch/arm/mach-bcm/kona_l2_cache.c
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2012-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012-2014 Broadcom Corporation
 
 
 #include <linux/init.h>
diff --git a/arch/arm/mach-bcm/kona_l2_cache.h b/arch/arm/mach-bcm/kona_l2_cache.h
index 46f84a95ab1c..77c5dc033910 100644
--- a/arch/arm/mach-bcm/kona_l2_cache.h
+++ b/arch/arm/mach-bcm/kona_l2_cache.h
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2012-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2012-2014 Broadcom Corporation */
 
 #ifdef CONFIG_ARCH_BCM_MOBILE_L2_CACHE
 void	kona_l2_cache_init(void);
diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c
index 4555f21e7077..8989299ebdd6 100644
--- a/arch/arm/mach-bcm/platsmp-brcmstb.c
+++ b/arch/arm/mach-bcm/platsmp-brcmstb.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Broadcom STB CPU SMP and hotplug support for ARM
  *
  * Copyright (C) 2013-2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/delay.h>
@@ -59,7 +51,7 @@ static u32 hif_cont_reg;
 /*
  * We must quiesce a dying CPU before it can be killed by the boot CPU. Because
  * one or more cache may be disabled, we must flush to ensure coherency. We
- * cannot use traditionl completion structures or spinlocks as they rely on
+ * cannot use traditional completion structures or spinlocks as they rely on
  * coherency.
  */
 static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state);
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 314de9477b84..fd32e576ecd0 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -2,6 +2,7 @@
 menuconfig ARCH_CLPS711X
 	bool "Cirrus Logic EP721x/EP731x-based"
 	depends on ARCH_MULTI_V4T
+	depends on CPU_LITTLE_ENDIAN
 	select CLPS711X_TIMER
 	select CPU_ARM720T
 	select GPIOLIB
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
deleted file mode 100644
index 1ecf5466931e..000000000000
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menuconfig ARCH_CNS3XXX
-	bool "Cavium Networks CNS3XXX family"
-	depends on ARCH_MULTI_V6
-	select ARM_GIC
-	help
-	  Support for Cavium Networks CNS3XXX platform.
-
-if ARCH_CNS3XXX
-
-config MACH_CNS3420VB
-	bool "Support for CNS3420 Validation Board"
-	depends on ATAGS
-	help
-	  Include support for the Cavium Networks CNS3420 MPCore Platform
-	  Baseboard.
-	  This is a platform with an on-board ARM11 MPCore and has support
-	  for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
-
-endif
diff --git a/arch/arm/mach-cns3xxx/Makefile b/arch/arm/mach-cns3xxx/Makefile
deleted file mode 100644
index 52ca6ed62304..000000000000
--- a/arch/arm/mach-cns3xxx/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx.o
-cns3xxx-y				+= core.o pm.o
-cns3xxx-$(CONFIG_ATAGS)			+= devices.o
-cns3xxx-$(CONFIG_PCI)			+= pcie.o
-cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
deleted file mode 100644
index 9099560aa462..000000000000
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ /dev/null
@@ -1,252 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Cavium Networks CNS3420 Validation Board
- *
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2008 ARM Limited
- * Copyright 2008 Cavium Networks
- *		  Scott Shu
- * Copyright 2010 MontaVista Software, LLC.
- *		  Anton Vorontsov <avorontsov@mvista.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/compiler.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include "cns3xxx.h"
-#include "pm.h"
-#include "core.h"
-#include "devices.h"
-
-/*
- * NOR Flash
- */
-static struct mtd_partition cns3420_nor_partitions[] = {
-	{
-		.name		= "uboot",
-		.size		= 0x00040000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.size		= 0x004C0000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "filesystem",
-		.size		= 0x7000000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "filesystem2",
-		.size		= 0x0AE0000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "ubootenv",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	},
-};
-
-static struct physmap_flash_data cns3420_nor_pdata = {
-	.width = 2,
-	.parts = cns3420_nor_partitions,
-	.nr_parts = ARRAY_SIZE(cns3420_nor_partitions),
-};
-
-static struct resource cns3420_nor_res = {
-	.start = CNS3XXX_FLASH_BASE,
-	.end = CNS3XXX_FLASH_BASE + SZ_128M - 1,
-	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct platform_device cns3420_nor_pdev = {
-	.name = "physmap-flash",
-	.id = 0,
-	.resource = &cns3420_nor_res,
-	.num_resources = 1,
-	.dev = {
-		.platform_data = &cns3420_nor_pdata,
-	},
-};
-
-/*
- * UART
- */
-static void __init cns3420_early_serial_setup(void)
-{
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	static struct uart_port cns3420_serial_port = {
-		.membase        = (void __iomem *)CNS3XXX_UART0_BASE_VIRT,
-		.mapbase        = CNS3XXX_UART0_BASE,
-		.irq            = IRQ_CNS3XXX_UART0,
-		.iotype         = UPIO_MEM,
-		.flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.regshift       = 2,
-		.uartclk        = 24000000,
-		.line           = 0,
-		.type           = PORT_16550A,
-		.fifosize       = 16,
-	};
-
-	early_serial_setup(&cns3420_serial_port);
-#endif
-}
-
-/*
- * USB
- */
-static struct resource cns3xxx_usb_ehci_resources[] = {
-	[0] = {
-		.start = CNS3XXX_USB_BASE,
-		.end   = CNS3XXX_USB_BASE + SZ_16M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_CNS3XXX_USB_EHCI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32);
-
-static int csn3xxx_usb_power_on(struct platform_device *pdev)
-{
-	/*
-	 * EHCI and OHCI share the same clock and power,
-	 * resetting twice would cause the 1st controller been reset.
-	 * Therefore only do power up  at the first up device, and
-	 * power down at the last down device.
-	 *
-	 * Set USB AHB INCR length to 16
-	 */
-	if (atomic_inc_return(&usb_pwr_ref) == 1) {
-		cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
-		cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-		cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
-		__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
-			MISC_CHIP_CONFIG_REG);
-	}
-
-	return 0;
-}
-
-static void csn3xxx_usb_power_off(struct platform_device *pdev)
-{
-	/*
-	 * EHCI and OHCI share the same clock and power,
-	 * resetting twice would cause the 1st controller been reset.
-	 * Therefore only do power up  at the first up device, and
-	 * power down at the last down device.
-	 */
-	if (atomic_dec_return(&usb_pwr_ref) == 0)
-		cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-}
-
-static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = {
-	.power_on	= csn3xxx_usb_power_on,
-	.power_off	= csn3xxx_usb_power_off,
-};
-
-static struct platform_device cns3xxx_usb_ehci_device = {
-	.name          = "ehci-platform",
-	.num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources),
-	.resource      = cns3xxx_usb_ehci_resources,
-	.dev           = {
-		.dma_mask          = &cns3xxx_usb_ehci_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data     = &cns3xxx_usb_ehci_pdata,
-	},
-};
-
-static struct resource cns3xxx_usb_ohci_resources[] = {
-	[0] = {
-		.start = CNS3XXX_USB_OHCI_BASE,
-		.end   = CNS3XXX_USB_OHCI_BASE + SZ_16M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_CNS3XXX_USB_OHCI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32);
-
-static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
-	.num_ports	= 1,
-	.power_on	= csn3xxx_usb_power_on,
-	.power_off	= csn3xxx_usb_power_off,
-};
-
-static struct platform_device cns3xxx_usb_ohci_device = {
-	.name          = "ohci-platform",
-	.num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources),
-	.resource      = cns3xxx_usb_ohci_resources,
-	.dev           = {
-		.dma_mask          = &cns3xxx_usb_ohci_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data	   = &cns3xxx_usb_ohci_pdata,
-	},
-};
-
-/*
- * Initialization
- */
-static struct platform_device *cns3420_pdevs[] __initdata = {
-	&cns3420_nor_pdev,
-	&cns3xxx_usb_ehci_device,
-	&cns3xxx_usb_ohci_device,
-};
-
-static void __init cns3420_init(void)
-{
-	cns3xxx_l2x0_init();
-
-	platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
-
-	cns3xxx_ahci_init();
-	cns3xxx_sdhci_init();
-
-	pm_power_off = cns3xxx_power_off;
-}
-
-static struct map_desc cns3420_io_desc[] __initdata = {
-	{
-		.virtual	= CNS3XXX_UART0_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init cns3420_map_io(void)
-{
-	cns3xxx_map_io();
-	iotable_init(cns3420_io_desc, ARRAY_SIZE(cns3420_io_desc));
-
-	cns3420_early_serial_setup();
-}
-
-MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
-	.atag_offset	= 0x100,
-	.map_io		= cns3420_map_io,
-	.init_irq	= cns3xxx_init_irq,
-	.init_time	= cns3xxx_timer_init,
-	.init_machine	= cns3420_init,
-	.init_late      = cns3xxx_pcie_init_late,
-	.restart	= cns3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/cns3xxx.h b/arch/arm/mach-cns3xxx/cns3xxx.h
deleted file mode 100644
index cbb105a74f90..000000000000
--- a/arch/arm/mach-cns3xxx/cns3xxx.h
+++ /dev/null
@@ -1,593 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2008 Cavium Networks
- */
-
-#ifndef __MACH_BOARD_CNS3XXXH
-#define __MACH_BOARD_CNS3XXXH
-
-/*
- * Memory map
- */
-#define CNS3XXX_FLASH_BASE			0x10000000	/* Flash/SRAM Memory Bank 0 */
-#define CNS3XXX_FLASH_SIZE			SZ_256M
-
-#define CNS3XXX_DDR2SDRAM_BASE			0x20000000	/* DDR2 SDRAM Memory */
-
-#define CNS3XXX_SPI_FLASH_BASE			0x60000000	/* SPI Serial Flash Memory */
-
-#define CNS3XXX_SWITCH_BASE			0x70000000	/* Switch and HNAT Control */
-
-#define CNS3XXX_PPE_BASE			0x70001000	/* HANT	*/
-
-#define CNS3XXX_EMBEDDED_SRAM_BASE		0x70002000	/* HANT Embedded SRAM */
-
-#define CNS3XXX_SSP_BASE			0x71000000	/* Synchronous Serial Port - SPI/PCM/I2C */
-
-#define CNS3XXX_DMC_BASE			0x72000000	/* DMC Control (DDR2 SDRAM) */
-
-#define CNS3XXX_SMC_BASE			0x73000000	/* SMC Control */
-
-#define SMC_MEMC_STATUS_OFFSET			0x000
-#define SMC_MEMIF_CFG_OFFSET			0x004
-#define SMC_MEMC_CFG_SET_OFFSET			0x008
-#define SMC_MEMC_CFG_CLR_OFFSET			0x00C
-#define SMC_DIRECT_CMD_OFFSET			0x010
-#define SMC_SET_CYCLES_OFFSET			0x014
-#define SMC_SET_OPMODE_OFFSET			0x018
-#define SMC_REFRESH_PERIOD_0_OFFSET		0x020
-#define SMC_REFRESH_PERIOD_1_OFFSET		0x024
-#define SMC_SRAM_CYCLES0_0_OFFSET		0x100
-#define SMC_NAND_CYCLES0_0_OFFSET		0x100
-#define SMC_OPMODE0_0_OFFSET			0x104
-#define SMC_SRAM_CYCLES0_1_OFFSET		0x120
-#define SMC_NAND_CYCLES0_1_OFFSET		0x120
-#define SMC_OPMODE0_1_OFFSET			0x124
-#define SMC_USER_STATUS_OFFSET			0x200
-#define SMC_USER_CONFIG_OFFSET			0x204
-#define SMC_ECC_STATUS_OFFSET			0x300
-#define SMC_ECC_MEMCFG_OFFSET			0x304
-#define SMC_ECC_MEMCOMMAND1_OFFSET		0x308
-#define SMC_ECC_MEMCOMMAND2_OFFSET		0x30C
-#define SMC_ECC_ADDR0_OFFSET			0x310
-#define SMC_ECC_ADDR1_OFFSET			0x314
-#define SMC_ECC_VALUE0_OFFSET			0x318
-#define SMC_ECC_VALUE1_OFFSET			0x31C
-#define SMC_ECC_VALUE2_OFFSET			0x320
-#define SMC_ECC_VALUE3_OFFSET			0x324
-#define SMC_PERIPH_ID_0_OFFSET			0xFE0
-#define SMC_PERIPH_ID_1_OFFSET			0xFE4
-#define SMC_PERIPH_ID_2_OFFSET			0xFE8
-#define SMC_PERIPH_ID_3_OFFSET			0xFEC
-#define SMC_PCELL_ID_0_OFFSET			0xFF0
-#define SMC_PCELL_ID_1_OFFSET			0xFF4
-#define SMC_PCELL_ID_2_OFFSET			0xFF8
-#define SMC_PCELL_ID_3_OFFSET			0xFFC
-
-#define CNS3XXX_GPIOA_BASE			0x74000000	/* GPIO port A */
-
-#define CNS3XXX_GPIOB_BASE			0x74800000	/* GPIO port B */
-
-#define CNS3XXX_RTC_BASE			0x75000000	/* Real Time Clock */
-
-#define RTC_SEC_OFFSET				0x00
-#define RTC_MIN_OFFSET				0x04
-#define RTC_HOUR_OFFSET				0x08
-#define RTC_DAY_OFFSET				0x0C
-#define RTC_SEC_ALM_OFFSET			0x10
-#define RTC_MIN_ALM_OFFSET			0x14
-#define RTC_HOUR_ALM_OFFSET			0x18
-#define RTC_REC_OFFSET				0x1C
-#define RTC_CTRL_OFFSET				0x20
-#define RTC_INTR_STS_OFFSET			0x34
-
-#define CNS3XXX_MISC_BASE			0x76000000	/* Misc Control */
-#define CNS3XXX_MISC_BASE_VIRT			0xFB000000	/* Misc Control */
-
-#define CNS3XXX_PM_BASE				0x77000000	/* Power Management Control */
-#define CNS3XXX_PM_BASE_VIRT			0xFB001000
-
-#define PM_CLK_GATE_OFFSET			0x00
-#define PM_SOFT_RST_OFFSET			0x04
-#define PM_HS_CFG_OFFSET			0x08
-#define PM_CACTIVE_STA_OFFSET			0x0C
-#define PM_PWR_STA_OFFSET			0x10
-#define PM_SYS_CLK_CTRL_OFFSET			0x14
-#define PM_PLL_LCD_I2S_CTRL_OFFSET		0x18
-#define PM_PLL_HM_PD_OFFSET			0x1C
-
-#define CNS3XXX_UART0_BASE			0x78000000	/* UART 0 */
-#define CNS3XXX_UART0_BASE_VIRT			0xFB002000
-
-#define CNS3XXX_UART1_BASE			0x78400000	/* UART 1 */
-
-#define CNS3XXX_UART2_BASE			0x78800000	/* UART 2 */
-
-#define CNS3XXX_DMAC_BASE			0x79000000	/* Generic DMA Control */
-
-#define CNS3XXX_CORESIGHT_BASE			0x7A000000	/* CoreSight */
-
-#define CNS3XXX_CRYPTO_BASE			0x7B000000	/* Crypto */
-
-#define CNS3XXX_I2S_BASE			0x7C000000	/* I2S */
-
-#define CNS3XXX_TIMER1_2_3_BASE			0x7C800000	/* Timer */
-#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFB003000
-
-#define TIMER1_COUNTER_OFFSET			0x00
-#define TIMER1_AUTO_RELOAD_OFFSET		0x04
-#define TIMER1_MATCH_V1_OFFSET			0x08
-#define TIMER1_MATCH_V2_OFFSET			0x0C
-
-#define TIMER2_COUNTER_OFFSET			0x10
-#define TIMER2_AUTO_RELOAD_OFFSET		0x14
-#define TIMER2_MATCH_V1_OFFSET			0x18
-#define TIMER2_MATCH_V2_OFFSET			0x1C
-
-#define TIMER1_2_CONTROL_OFFSET			0x30
-#define TIMER1_2_INTERRUPT_STATUS_OFFSET	0x34
-#define TIMER1_2_INTERRUPT_MASK_OFFSET		0x38
-
-#define TIMER_FREERUN_OFFSET			0x40
-#define TIMER_FREERUN_CONTROL_OFFSET		0x44
-
-#define CNS3XXX_HCIE_BASE			0x7D000000	/* HCIE Control */
-
-#define CNS3XXX_RAID_BASE			0x7E000000	/* RAID Control */
-
-#define CNS3XXX_AXI_IXC_BASE			0x7F000000	/* AXI IXC */
-
-#define CNS3XXX_CLCD_BASE			0x80000000	/* LCD Control */
-
-#define CNS3XXX_USBOTG_BASE			0x81000000	/* USB OTG Control */
-
-#define CNS3XXX_USB_BASE			0x82000000	/* USB Host Control */
-
-#define CNS3XXX_SATA2_BASE			0x83000000	/* SATA */
-#define CNS3XXX_SATA2_SIZE			SZ_16M
-
-#define CNS3XXX_CAMERA_BASE			0x84000000	/* Camera Interface */
-
-#define CNS3XXX_SDIO_BASE			0x85000000	/* SDIO */
-
-#define CNS3XXX_I2S_TDM_BASE			0x86000000	/* I2S TDM */
-
-#define CNS3XXX_2DG_BASE			0x87000000	/* 2D Graphic Control */
-
-#define CNS3XXX_USB_OHCI_BASE			0x88000000	/* USB OHCI */
-
-#define CNS3XXX_L2C_BASE			0x92000000	/* L2 Cache Control */
-
-#define CNS3XXX_PCIE0_MEM_BASE			0xA0000000	/* PCIe Port 0 IO/Memory Space */
-
-#define CNS3XXX_PCIE0_HOST_BASE			0xAB000000	/* PCIe Port 0 RC Base */
-#define CNS3XXX_PCIE0_HOST_BASE_VIRT		0xE1000000
-
-#define CNS3XXX_PCIE0_IO_BASE			0xAC000000	/* PCIe Port 0 */
-
-#define CNS3XXX_PCIE0_CFG0_BASE			0xAD000000	/* PCIe Port 0 CFG Type 0 */
-#define CNS3XXX_PCIE0_CFG0_BASE_VIRT		0xE3000000
-
-#define CNS3XXX_PCIE0_CFG1_BASE			0xAE000000	/* PCIe Port 0 CFG Type 1 */
-#define CNS3XXX_PCIE0_CFG1_BASE_VIRT		0xE4000000
-
-#define CNS3XXX_PCIE0_MSG_BASE			0xAF000000	/* PCIe Port 0 Message Space */
-
-#define CNS3XXX_PCIE1_MEM_BASE			0xB0000000	/* PCIe Port 1 IO/Memory Space */
-
-#define CNS3XXX_PCIE1_HOST_BASE			0xBB000000	/* PCIe Port 1 RC Base */
-#define CNS3XXX_PCIE1_HOST_BASE_VIRT		0xE9000000
-
-#define CNS3XXX_PCIE1_IO_BASE			0xBC000000	/* PCIe Port 1 */
-
-#define CNS3XXX_PCIE1_CFG0_BASE			0xBD000000	/* PCIe Port 1 CFG Type 0 */
-#define CNS3XXX_PCIE1_CFG0_BASE_VIRT		0xEB000000
-
-#define CNS3XXX_PCIE1_CFG1_BASE			0xBE000000	/* PCIe Port 1 CFG Type 1 */
-#define CNS3XXX_PCIE1_CFG1_BASE_VIRT		0xEC000000
-
-#define CNS3XXX_PCIE1_MSG_BASE			0xBF000000	/* PCIe Port 1 Message Space */
-
-/*
- * Testchip peripheral and fpga gic regions
- */
-#define CNS3XXX_TC11MP_SCU_BASE			0x90000000	/* IRQ, Test chip */
-#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFB004000
-
-#define CNS3XXX_TC11MP_GIC_CPU_BASE		0x90000100	/* Test chip interrupt controller CPU interface */
-#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
-
-#define CNS3XXX_TC11MP_TWD_BASE			0x90000600
-#define CNS3XXX_TC11MP_TWD_BASE_VIRT		(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600)
-
-#define CNS3XXX_TC11MP_GIC_DIST_BASE		0x90001000	/* Test chip interrupt controller distributor */
-#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
-
-#define CNS3XXX_TC11MP_L220_BASE		0x92002000	/* L220 registers */
-
-/*
- * Misc block
- */
-#define MISC_MEM_MAP(offs) (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + (offs))
-
-#define MISC_MEMORY_REMAP_REG			MISC_MEM_MAP(0x00)
-#define MISC_CHIP_CONFIG_REG			MISC_MEM_MAP(0x04)
-#define MISC_DEBUG_PROBE_DATA_REG		MISC_MEM_MAP(0x08)
-#define MISC_DEBUG_PROBE_SELECTION_REG		MISC_MEM_MAP(0x0C)
-#define MISC_IO_PIN_FUNC_SELECTION_REG		MISC_MEM_MAP(0x10)
-#define MISC_GPIOA_PIN_ENABLE_REG		MISC_MEM_MAP(0x14)
-#define MISC_GPIOB_PIN_ENABLE_REG		MISC_MEM_MAP(0x18)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A	MISC_MEM_MAP(0x1C)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B	MISC_MEM_MAP(0x20)
-#define MISC_GPIOA_15_0_PULL_CTRL_REG		MISC_MEM_MAP(0x24)
-#define MISC_GPIOA_16_31_PULL_CTRL_REG		MISC_MEM_MAP(0x28)
-#define MISC_GPIOB_15_0_PULL_CTRL_REG		MISC_MEM_MAP(0x2C)
-#define MISC_GPIOB_16_31_PULL_CTRL_REG		MISC_MEM_MAP(0x30)
-#define MISC_IO_PULL_CTRL_REG			MISC_MEM_MAP(0x34)
-#define MISC_E_FUSE_31_0_REG			MISC_MEM_MAP(0x40)
-#define MISC_E_FUSE_63_32_REG			MISC_MEM_MAP(0x44)
-#define MISC_E_FUSE_95_64_REG			MISC_MEM_MAP(0x48)
-#define MISC_E_FUSE_127_96_REG			MISC_MEM_MAP(0x4C)
-#define MISC_SOFTWARE_TEST_1_REG		MISC_MEM_MAP(0x50)
-#define MISC_SOFTWARE_TEST_2_REG		MISC_MEM_MAP(0x54)
-
-#define MISC_SATA_POWER_MODE			MISC_MEM_MAP(0x310)
-
-#define MISC_USB_CFG_REG			MISC_MEM_MAP(0x800)
-#define MISC_USB_STS_REG			MISC_MEM_MAP(0x804)
-#define MISC_USBPHY00_CFG_REG			MISC_MEM_MAP(0x808)
-#define MISC_USBPHY01_CFG_REG			MISC_MEM_MAP(0x80c)
-#define MISC_USBPHY10_CFG_REG			MISC_MEM_MAP(0x810)
-#define MISC_USBPHY11_CFG_REG			MISC_MEM_MAP(0x814)
-
-#define MISC_PCIEPHY_CMCTL(x)			MISC_MEM_MAP(0x900 + (x) * 0x004)
-#define MISC_PCIEPHY_CTL(x)			MISC_MEM_MAP(0x940 + (x) * 0x100)
-#define MISC_PCIE_AXIS_AWMISC(x)		MISC_MEM_MAP(0x944 + (x) * 0x100)
-#define MISC_PCIE_AXIS_ARMISC(x)		MISC_MEM_MAP(0x948 + (x) * 0x100)
-#define MISC_PCIE_AXIS_RMISC(x)			MISC_MEM_MAP(0x94C + (x) * 0x100)
-#define MISC_PCIE_AXIS_BMISC(x)			MISC_MEM_MAP(0x950 + (x) * 0x100)
-#define MISC_PCIE_AXIM_RMISC(x)			MISC_MEM_MAP(0x954 + (x) * 0x100)
-#define MISC_PCIE_AXIM_BMISC(x)			MISC_MEM_MAP(0x958 + (x) * 0x100)
-#define MISC_PCIE_CTRL(x)			MISC_MEM_MAP(0x95C + (x) * 0x100)
-#define MISC_PCIE_PM_DEBUG(x)			MISC_MEM_MAP(0x960 + (x) * 0x100)
-#define MISC_PCIE_RFC_DEBUG(x)			MISC_MEM_MAP(0x964 + (x) * 0x100)
-#define MISC_PCIE_CXPL_DEBUGL(x)		MISC_MEM_MAP(0x968 + (x) * 0x100)
-#define MISC_PCIE_CXPL_DEBUGH(x)		MISC_MEM_MAP(0x96C + (x) * 0x100)
-#define MISC_PCIE_DIAG_DEBUGH(x)		MISC_MEM_MAP(0x970 + (x) * 0x100)
-#define MISC_PCIE_W1CLR(x)			MISC_MEM_MAP(0x974 + (x) * 0x100)
-#define MISC_PCIE_INT_MASK(x)			MISC_MEM_MAP(0x978 + (x) * 0x100)
-#define MISC_PCIE_INT_STATUS(x)			MISC_MEM_MAP(0x97C + (x) * 0x100)
-
-/*
- * Power management and clock control
- */
-#define PMU_MEM_MAP(offs) (void __iomem *)(CNS3XXX_PM_BASE_VIRT + (offs))
-
-#define PM_CLK_GATE_REG					PMU_MEM_MAP(0x000)
-#define PM_SOFT_RST_REG					PMU_MEM_MAP(0x004)
-#define PM_HS_CFG_REG					PMU_MEM_MAP(0x008)
-#define PM_CACTIVE_STA_REG				PMU_MEM_MAP(0x00C)
-#define PM_PWR_STA_REG					PMU_MEM_MAP(0x010)
-#define PM_CLK_CTRL_REG					PMU_MEM_MAP(0x014)
-#define PM_PLL_LCD_I2S_CTRL_REG				PMU_MEM_MAP(0x018)
-#define PM_PLL_HM_PD_CTRL_REG				PMU_MEM_MAP(0x01C)
-#define PM_REGULAT_CTRL_REG				PMU_MEM_MAP(0x020)
-#define PM_WDT_CTRL_REG					PMU_MEM_MAP(0x024)
-#define PM_WU_CTRL0_REG					PMU_MEM_MAP(0x028)
-#define PM_WU_CTRL1_REG					PMU_MEM_MAP(0x02C)
-#define PM_CSR_REG					PMU_MEM_MAP(0x030)
-
-/* PM_CLK_GATE_REG */
-#define PM_CLK_GATE_REG_OFFSET_SDIO			(25)
-#define PM_CLK_GATE_REG_OFFSET_GPU			(24)
-#define PM_CLK_GATE_REG_OFFSET_CIM			(23)
-#define PM_CLK_GATE_REG_OFFSET_LCDC			(22)
-#define PM_CLK_GATE_REG_OFFSET_I2S			(21)
-#define PM_CLK_GATE_REG_OFFSET_RAID			(20)
-#define PM_CLK_GATE_REG_OFFSET_SATA			(19)
-#define PM_CLK_GATE_REG_OFFSET_PCIE(x)			(17 + (x))
-#define PM_CLK_GATE_REG_OFFSET_USB_HOST			(16)
-#define PM_CLK_GATE_REG_OFFSET_USB_OTG			(15)
-#define PM_CLK_GATE_REG_OFFSET_TIMER			(14)
-#define PM_CLK_GATE_REG_OFFSET_CRYPTO			(13)
-#define PM_CLK_GATE_REG_OFFSET_HCIE			(12)
-#define PM_CLK_GATE_REG_OFFSET_SWITCH			(11)
-#define PM_CLK_GATE_REG_OFFSET_GPIO			(10)
-#define PM_CLK_GATE_REG_OFFSET_UART3			(9)
-#define PM_CLK_GATE_REG_OFFSET_UART2			(8)
-#define PM_CLK_GATE_REG_OFFSET_UART1			(7)
-#define PM_CLK_GATE_REG_OFFSET_RTC			(5)
-#define PM_CLK_GATE_REG_OFFSET_GDMA			(4)
-#define PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C		(3)
-#define PM_CLK_GATE_REG_OFFSET_SMC_NFI			(1)
-#define PM_CLK_GATE_REG_MASK				(0x03FFFFBA)
-
-/* PM_SOFT_RST_REG */
-#define PM_SOFT_RST_REG_OFFST_WARM_RST_FLAG		(31)
-#define PM_SOFT_RST_REG_OFFST_CPU1			(29)
-#define PM_SOFT_RST_REG_OFFST_CPU0			(28)
-#define PM_SOFT_RST_REG_OFFST_SDIO			(25)
-#define PM_SOFT_RST_REG_OFFST_GPU			(24)
-#define PM_SOFT_RST_REG_OFFST_CIM			(23)
-#define PM_SOFT_RST_REG_OFFST_LCDC			(22)
-#define PM_SOFT_RST_REG_OFFST_I2S			(21)
-#define PM_SOFT_RST_REG_OFFST_RAID			(20)
-#define PM_SOFT_RST_REG_OFFST_SATA			(19)
-#define PM_SOFT_RST_REG_OFFST_PCIE(x)			(17 + (x))
-#define PM_SOFT_RST_REG_OFFST_USB_HOST			(16)
-#define PM_SOFT_RST_REG_OFFST_USB_OTG			(15)
-#define PM_SOFT_RST_REG_OFFST_TIMER			(14)
-#define PM_SOFT_RST_REG_OFFST_CRYPTO			(13)
-#define PM_SOFT_RST_REG_OFFST_HCIE			(12)
-#define PM_SOFT_RST_REG_OFFST_SWITCH			(11)
-#define PM_SOFT_RST_REG_OFFST_GPIO			(10)
-#define PM_SOFT_RST_REG_OFFST_UART3			(9)
-#define PM_SOFT_RST_REG_OFFST_UART2			(8)
-#define PM_SOFT_RST_REG_OFFST_UART1			(7)
-#define PM_SOFT_RST_REG_OFFST_RTC			(5)
-#define PM_SOFT_RST_REG_OFFST_GDMA			(4)
-#define PM_SOFT_RST_REG_OFFST_SPI_PCM_I2C		(3)
-#define PM_SOFT_RST_REG_OFFST_DMC			(2)
-#define PM_SOFT_RST_REG_OFFST_SMC_NFI			(1)
-#define PM_SOFT_RST_REG_OFFST_GLOBAL			(0)
-#define PM_SOFT_RST_REG_MASK				(0xF3FFFFBF)
-
-/* PMHS_CFG_REG */
-#define PM_HS_CFG_REG_OFFSET_SDIO			(25)
-#define PM_HS_CFG_REG_OFFSET_GPU			(24)
-#define PM_HS_CFG_REG_OFFSET_CIM			(23)
-#define PM_HS_CFG_REG_OFFSET_LCDC			(22)
-#define PM_HS_CFG_REG_OFFSET_I2S			(21)
-#define PM_HS_CFG_REG_OFFSET_RAID			(20)
-#define PM_HS_CFG_REG_OFFSET_SATA			(19)
-#define PM_HS_CFG_REG_OFFSET_PCIE1			(18)
-#define PM_HS_CFG_REG_OFFSET_PCIE0			(17)
-#define PM_HS_CFG_REG_OFFSET_USB_HOST			(16)
-#define PM_HS_CFG_REG_OFFSET_USB_OTG			(15)
-#define PM_HS_CFG_REG_OFFSET_TIMER			(14)
-#define PM_HS_CFG_REG_OFFSET_CRYPTO			(13)
-#define PM_HS_CFG_REG_OFFSET_HCIE			(12)
-#define PM_HS_CFG_REG_OFFSET_SWITCH			(11)
-#define PM_HS_CFG_REG_OFFSET_GPIO			(10)
-#define PM_HS_CFG_REG_OFFSET_UART3			(9)
-#define PM_HS_CFG_REG_OFFSET_UART2			(8)
-#define PM_HS_CFG_REG_OFFSET_UART1			(7)
-#define PM_HS_CFG_REG_OFFSET_RTC			(5)
-#define PM_HS_CFG_REG_OFFSET_GDMA			(4)
-#define PM_HS_CFG_REG_OFFSET_SPI_PCM_I2S		(3)
-#define PM_HS_CFG_REG_OFFSET_DMC			(2)
-#define PM_HS_CFG_REG_OFFSET_SMC_NFI			(1)
-#define PM_HS_CFG_REG_MASK				(0x03FFFFBE)
-#define PM_HS_CFG_REG_MASK_SUPPORT			(0x01100806)
-
-/* PM_CACTIVE_STA_REG */
-#define PM_CACTIVE_STA_REG_OFFSET_SDIO			(25)
-#define PM_CACTIVE_STA_REG_OFFSET_GPU			(24)
-#define PM_CACTIVE_STA_REG_OFFSET_CIM			(23)
-#define PM_CACTIVE_STA_REG_OFFSET_LCDC			(22)
-#define PM_CACTIVE_STA_REG_OFFSET_I2S			(21)
-#define PM_CACTIVE_STA_REG_OFFSET_RAID			(20)
-#define PM_CACTIVE_STA_REG_OFFSET_SATA			(19)
-#define PM_CACTIVE_STA_REG_OFFSET_PCIE1			(18)
-#define PM_CACTIVE_STA_REG_OFFSET_PCIE0			(17)
-#define PM_CACTIVE_STA_REG_OFFSET_USB_HOST		(16)
-#define PM_CACTIVE_STA_REG_OFFSET_USB_OTG		(15)
-#define PM_CACTIVE_STA_REG_OFFSET_TIMER			(14)
-#define PM_CACTIVE_STA_REG_OFFSET_CRYPTO		(13)
-#define PM_CACTIVE_STA_REG_OFFSET_HCIE			(12)
-#define PM_CACTIVE_STA_REG_OFFSET_SWITCH		(11)
-#define PM_CACTIVE_STA_REG_OFFSET_GPIO			(10)
-#define PM_CACTIVE_STA_REG_OFFSET_UART3			(9)
-#define PM_CACTIVE_STA_REG_OFFSET_UART2			(8)
-#define PM_CACTIVE_STA_REG_OFFSET_UART1			(7)
-#define PM_CACTIVE_STA_REG_OFFSET_RTC			(5)
-#define PM_CACTIVE_STA_REG_OFFSET_GDMA			(4)
-#define PM_CACTIVE_STA_REG_OFFSET_SPI_PCM_I2S		(3)
-#define PM_CACTIVE_STA_REG_OFFSET_DMC			(2)
-#define PM_CACTIVE_STA_REG_OFFSET_SMC_NFI		(1)
-#define PM_CACTIVE_STA_REG_MASK				(0x03FFFFBE)
-
-/* PM_PWR_STA_REG */
-#define PM_PWR_STA_REG_REG_OFFSET_SDIO			(25)
-#define PM_PWR_STA_REG_REG_OFFSET_GPU			(24)
-#define PM_PWR_STA_REG_REG_OFFSET_CIM			(23)
-#define PM_PWR_STA_REG_REG_OFFSET_LCDC			(22)
-#define PM_PWR_STA_REG_REG_OFFSET_I2S			(21)
-#define PM_PWR_STA_REG_REG_OFFSET_RAID			(20)
-#define PM_PWR_STA_REG_REG_OFFSET_SATA			(19)
-#define PM_PWR_STA_REG_REG_OFFSET_PCIE1			(18)
-#define PM_PWR_STA_REG_REG_OFFSET_PCIE0			(17)
-#define PM_PWR_STA_REG_REG_OFFSET_USB_HOST		(16)
-#define PM_PWR_STA_REG_REG_OFFSET_USB_OTG		(15)
-#define PM_PWR_STA_REG_REG_OFFSET_TIMER			(14)
-#define PM_PWR_STA_REG_REG_OFFSET_CRYPTO		(13)
-#define PM_PWR_STA_REG_REG_OFFSET_HCIE			(12)
-#define PM_PWR_STA_REG_REG_OFFSET_SWITCH		(11)
-#define PM_PWR_STA_REG_REG_OFFSET_GPIO			(10)
-#define PM_PWR_STA_REG_REG_OFFSET_UART3			(9)
-#define PM_PWR_STA_REG_REG_OFFSET_UART2			(8)
-#define PM_PWR_STA_REG_REG_OFFSET_UART1			(7)
-#define PM_PWR_STA_REG_REG_OFFSET_RTC			(5)
-#define PM_PWR_STA_REG_REG_OFFSET_GDMA			(4)
-#define PM_PWR_STA_REG_REG_OFFSET_SPI_PCM_I2S		(3)
-#define PM_PWR_STA_REG_REG_OFFSET_DMC			(2)
-#define PM_PWR_STA_REG_REG_OFFSET_SMC_NFI		(1)
-#define PM_PWR_STA_REG_REG_MASK				(0x03FFFFBE)
-
-/* PM_CLK_CTRL_REG */
-#define PM_CLK_CTRL_REG_OFFSET_I2S_MCLK			(31)
-#define PM_CLK_CTRL_REG_OFFSET_DDR2_CHG_EN		(30)
-#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF1_EN		(29)
-#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF0_EN		(28)
-#define PM_CLK_CTRL_REG_OFFSET_TIMER_SIM_MODE		(27)
-#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_DIV		(24)
-#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_SEL		(22)
-#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_DIV		(20)
-#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_SEL		(16)
-#define PM_CLK_CTRL_REG_OFFSET_MDC_DIV			(14)
-#define PM_CLK_CTRL_REG_OFFSET_CRYPTO_CLK_SEL		(12)
-#define PM_CLK_CTRL_REG_OFFSET_CPU_PWR_MODE		(9)
-#define PM_CLK_CTRL_REG_OFFSET_PLL_DDR2_SEL		(7)
-#define PM_CLK_CTRL_REG_OFFSET_DIV_IMMEDIATE		(6)
-#define PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV		(4)
-#define PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL		(0)
-
-#define PM_CPU_CLK_DIV(DIV) { \
-	PM_CLK_CTRL_REG &= ~((0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
-	PM_CLK_CTRL_REG |= (((DIV)&0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
-}
-
-#define PM_PLL_CPU_SEL(CPU) { \
-	PM_CLK_CTRL_REG &= ~((0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
-	PM_CLK_CTRL_REG |= (((CPU)&0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
-}
-
-/* PM_PLL_LCD_I2S_CTRL_REG */
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_MCLK_SMC_DIV	(22)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_R_SEL		(17)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_P	(11)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_M	(3)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_S	(0)
-
-/* PM_PLL_HM_PD_CTRL_REG */
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1		(11)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0		(10)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2SCD		(6)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2S		(5)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_LCD		(4)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB		(3)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_RGMII		(2)
-#define PM_PLL_HM_PD_CTRL_REG_MASK			(0x00000C7C)
-
-/* PM_WDT_CTRL_REG */
-#define PM_WDT_CTRL_REG_OFFSET_RESET_CPU_ONLY		(0)
-
-/* PM_CSR_REG - Clock Scaling Register*/
-#define PM_CSR_REG_OFFSET_CSR_EN			(30)
-#define PM_CSR_REG_OFFSET_CSR_NUM			(0)
-
-#define CNS3XXX_PWR_CLK_EN(BLOCK) (0x1<<PM_CLK_GATE_REG_OFFSET_##BLOCK)
-
-/* Software reset*/
-#define CNS3XXX_PWR_SOFTWARE_RST(BLOCK) (0x1<<PM_SOFT_RST_REG_OFFST_##BLOCK)
-
-/*
- * CNS3XXX support several power saving mode as following,
- * DFS, IDLE, HALT, DOZE, SLEEP, Hibernate
- */
-#define CNS3XXX_PWR_CPU_MODE_DFS			(0)
-#define CNS3XXX_PWR_CPU_MODE_IDLE			(1)
-#define CNS3XXX_PWR_CPU_MODE_HALT			(2)
-#define CNS3XXX_PWR_CPU_MODE_DOZE			(3)
-#define CNS3XXX_PWR_CPU_MODE_SLEEP			(4)
-#define CNS3XXX_PWR_CPU_MODE_HIBERNATE			(5)
-
-#define CNS3XXX_PWR_PLL(BLOCK)	(0x1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_##BLOCK)
-#define CNS3XXX_PWR_PLL_ALL	PM_PLL_HM_PD_CTRL_REG_MASK
-
-/* Change CPU frequency and divider */
-#define CNS3XXX_PWR_PLL_CPU_300MHZ			(0)
-#define CNS3XXX_PWR_PLL_CPU_333MHZ			(1)
-#define CNS3XXX_PWR_PLL_CPU_366MHZ			(2)
-#define CNS3XXX_PWR_PLL_CPU_400MHZ			(3)
-#define CNS3XXX_PWR_PLL_CPU_433MHZ			(4)
-#define CNS3XXX_PWR_PLL_CPU_466MHZ			(5)
-#define CNS3XXX_PWR_PLL_CPU_500MHZ			(6)
-#define CNS3XXX_PWR_PLL_CPU_533MHZ			(7)
-#define CNS3XXX_PWR_PLL_CPU_566MHZ			(8)
-#define CNS3XXX_PWR_PLL_CPU_600MHZ			(9)
-#define CNS3XXX_PWR_PLL_CPU_633MHZ			(10)
-#define CNS3XXX_PWR_PLL_CPU_666MHZ			(11)
-#define CNS3XXX_PWR_PLL_CPU_700MHZ			(12)
-
-#define CNS3XXX_PWR_CPU_CLK_DIV_BY1			(0)
-#define CNS3XXX_PWR_CPU_CLK_DIV_BY2			(1)
-#define CNS3XXX_PWR_CPU_CLK_DIV_BY4			(2)
-
-/* Change DDR2 frequency */
-#define CNS3XXX_PWR_PLL_DDR2_200MHZ			(0)
-#define CNS3XXX_PWR_PLL_DDR2_266MHZ			(1)
-#define CNS3XXX_PWR_PLL_DDR2_333MHZ			(2)
-#define CNS3XXX_PWR_PLL_DDR2_400MHZ			(3)
-
-void cns3xxx_pwr_soft_rst(unsigned int block);
-void cns3xxx_pwr_clk_en(unsigned int block);
-int cns3xxx_cpu_clock(void);
-
-/*
- * ARM11 MPCore interrupt sources (primary GIC)
- */
-#define IRQ_TC11MP_GIC_START	32
-
-#define IRQ_CNS3XXX_PMU			(IRQ_TC11MP_GIC_START + 0)
-#define IRQ_CNS3XXX_SDIO		(IRQ_TC11MP_GIC_START + 1)
-#define IRQ_CNS3XXX_L2CC		(IRQ_TC11MP_GIC_START + 2)
-#define IRQ_CNS3XXX_RTC			(IRQ_TC11MP_GIC_START + 3)
-#define IRQ_CNS3XXX_I2S			(IRQ_TC11MP_GIC_START + 4)
-#define IRQ_CNS3XXX_PCM			(IRQ_TC11MP_GIC_START + 5)
-#define IRQ_CNS3XXX_SPI			(IRQ_TC11MP_GIC_START + 6)
-#define IRQ_CNS3XXX_I2C			(IRQ_TC11MP_GIC_START + 7)
-#define IRQ_CNS3XXX_CIM			(IRQ_TC11MP_GIC_START + 8)
-#define IRQ_CNS3XXX_GPU			(IRQ_TC11MP_GIC_START + 9)
-#define IRQ_CNS3XXX_LCD			(IRQ_TC11MP_GIC_START + 10)
-#define IRQ_CNS3XXX_GPIOA		(IRQ_TC11MP_GIC_START + 11)
-#define IRQ_CNS3XXX_GPIOB		(IRQ_TC11MP_GIC_START + 12)
-#define IRQ_CNS3XXX_UART0		(IRQ_TC11MP_GIC_START + 13)
-#define IRQ_CNS3XXX_UART1		(IRQ_TC11MP_GIC_START + 14)
-#define IRQ_CNS3XXX_UART2		(IRQ_TC11MP_GIC_START + 15)
-#define IRQ_CNS3XXX_ARM11		(IRQ_TC11MP_GIC_START + 16)
-
-#define IRQ_CNS3XXX_SW_STATUS		(IRQ_TC11MP_GIC_START + 17)
-#define IRQ_CNS3XXX_SW_R0TXC		(IRQ_TC11MP_GIC_START + 18)
-#define IRQ_CNS3XXX_SW_R0RXC		(IRQ_TC11MP_GIC_START + 19)
-#define IRQ_CNS3XXX_SW_R0QE		(IRQ_TC11MP_GIC_START + 20)
-#define IRQ_CNS3XXX_SW_R0QF		(IRQ_TC11MP_GIC_START + 21)
-#define IRQ_CNS3XXX_SW_R1TXC		(IRQ_TC11MP_GIC_START + 22)
-#define IRQ_CNS3XXX_SW_R1RXC		(IRQ_TC11MP_GIC_START + 23)
-#define IRQ_CNS3XXX_SW_R1QE		(IRQ_TC11MP_GIC_START + 24)
-#define IRQ_CNS3XXX_SW_R1QF		(IRQ_TC11MP_GIC_START + 25)
-#define IRQ_CNS3XXX_SW_PPE		(IRQ_TC11MP_GIC_START + 26)
-
-#define IRQ_CNS3XXX_CRYPTO		(IRQ_TC11MP_GIC_START + 27)
-#define IRQ_CNS3XXX_HCIE		(IRQ_TC11MP_GIC_START + 28)
-#define IRQ_CNS3XXX_PCIE0_DEVICE	(IRQ_TC11MP_GIC_START + 29)
-#define IRQ_CNS3XXX_PCIE1_DEVICE	(IRQ_TC11MP_GIC_START + 30)
-#define IRQ_CNS3XXX_USB_OTG		(IRQ_TC11MP_GIC_START + 31)
-#define IRQ_CNS3XXX_USB_EHCI		(IRQ_TC11MP_GIC_START + 32)
-#define IRQ_CNS3XXX_SATA		(IRQ_TC11MP_GIC_START + 33)
-#define IRQ_CNS3XXX_RAID		(IRQ_TC11MP_GIC_START + 34)
-#define IRQ_CNS3XXX_SMC			(IRQ_TC11MP_GIC_START + 35)
-
-#define IRQ_CNS3XXX_DMAC_ABORT		(IRQ_TC11MP_GIC_START + 36)
-#define IRQ_CNS3XXX_DMAC0		(IRQ_TC11MP_GIC_START + 37)
-#define IRQ_CNS3XXX_DMAC1		(IRQ_TC11MP_GIC_START + 38)
-#define IRQ_CNS3XXX_DMAC2		(IRQ_TC11MP_GIC_START + 39)
-#define IRQ_CNS3XXX_DMAC3		(IRQ_TC11MP_GIC_START + 40)
-#define IRQ_CNS3XXX_DMAC4		(IRQ_TC11MP_GIC_START + 41)
-#define IRQ_CNS3XXX_DMAC5		(IRQ_TC11MP_GIC_START + 42)
-#define IRQ_CNS3XXX_DMAC6		(IRQ_TC11MP_GIC_START + 43)
-#define IRQ_CNS3XXX_DMAC7		(IRQ_TC11MP_GIC_START + 44)
-#define IRQ_CNS3XXX_DMAC8		(IRQ_TC11MP_GIC_START + 45)
-#define IRQ_CNS3XXX_DMAC9		(IRQ_TC11MP_GIC_START + 46)
-#define IRQ_CNS3XXX_DMAC10		(IRQ_TC11MP_GIC_START + 47)
-#define IRQ_CNS3XXX_DMAC11		(IRQ_TC11MP_GIC_START + 48)
-#define IRQ_CNS3XXX_DMAC12		(IRQ_TC11MP_GIC_START + 49)
-#define IRQ_CNS3XXX_DMAC13		(IRQ_TC11MP_GIC_START + 50)
-#define IRQ_CNS3XXX_DMAC14		(IRQ_TC11MP_GIC_START + 51)
-#define IRQ_CNS3XXX_DMAC15		(IRQ_TC11MP_GIC_START + 52)
-#define IRQ_CNS3XXX_DMAC16		(IRQ_TC11MP_GIC_START + 53)
-#define IRQ_CNS3XXX_DMAC17		(IRQ_TC11MP_GIC_START + 54)
-
-#define IRQ_CNS3XXX_PCIE0_RC		(IRQ_TC11MP_GIC_START + 55)
-#define IRQ_CNS3XXX_PCIE1_RC		(IRQ_TC11MP_GIC_START + 56)
-#define IRQ_CNS3XXX_TIMER0		(IRQ_TC11MP_GIC_START + 57)
-#define IRQ_CNS3XXX_TIMER1		(IRQ_TC11MP_GIC_START + 58)
-#define IRQ_CNS3XXX_USB_OHCI		(IRQ_TC11MP_GIC_START + 59)
-#define IRQ_CNS3XXX_TIMER2		(IRQ_TC11MP_GIC_START + 60)
-#define IRQ_CNS3XXX_EXTERNAL_PIN0	(IRQ_TC11MP_GIC_START + 61)
-#define IRQ_CNS3XXX_EXTERNAL_PIN1	(IRQ_TC11MP_GIC_START + 62)
-#define IRQ_CNS3XXX_EXTERNAL_PIN2	(IRQ_TC11MP_GIC_START + 63)
-
-#define NR_IRQS_CNS3XXX			(IRQ_TC11MP_GIC_START + 64)
-
-#endif	/* __MACH_BOARD_CNS3XXX_H */
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
deleted file mode 100644
index e4f4b20b83a2..000000000000
--- a/arch/arm/mach-cns3xxx/core.c
+++ /dev/null
@@ -1,408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 1999 - 2003 ARM Limited
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2008 Cavium Networks
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-#include <asm/hardware/cache-l2x0.h>
-#include "cns3xxx.h"
-#include "core.h"
-#include "pm.h"
-
-static struct map_desc cns3xxx_io_desc[] __initdata = {
-	{
-		.virtual	= CNS3XXX_TC11MP_SCU_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TIMER1_2_3_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TIMER1_2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_MISC_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_MISC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PM_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PM_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-#ifdef CONFIG_PCI
-	}, {
-		.virtual	= CNS3XXX_PCIE0_HOST_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PCIE0_CFG0_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE),
-		.length		= SZ_64K, /* really 4 KiB at offset 32 KiB */
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PCIE0_CFG1_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PCIE1_HOST_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PCIE1_CFG0_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE),
-		.length		= SZ_64K, /* really 4 KiB at offset 32 KiB */
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PCIE1_CFG1_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE,
-#endif
-	},
-};
-
-void __init cns3xxx_map_io(void)
-{
-	iotable_init(cns3xxx_io_desc, ARRAY_SIZE(cns3xxx_io_desc));
-}
-
-/* used by entry-macro.S */
-void __init cns3xxx_init_irq(void)
-{
-	gic_init(IOMEM(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT),
-		 IOMEM(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT));
-}
-
-void cns3xxx_power_off(void)
-{
-	u32 __iomem *pm_base = IOMEM(CNS3XXX_PM_BASE_VIRT);
-	u32 clkctrl;
-
-	printk(KERN_INFO "powering system down...\n");
-
-	clkctrl = readl(pm_base + PM_SYS_CLK_CTRL_OFFSET);
-	clkctrl &= 0xfffff1ff;
-	clkctrl |= (0x5 << 9);		/* Hibernate */
-	writel(clkctrl, pm_base + PM_SYS_CLK_CTRL_OFFSET);
-
-}
-
-/*
- * Timer
- */
-static void __iomem *cns3xxx_tmr1;
-
-static int cns3xxx_shutdown(struct clock_event_device *clk)
-{
-	writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	return 0;
-}
-
-static int cns3xxx_set_oneshot(struct clock_event_device *clk)
-{
-	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	/* period set, and timer enabled in 'next_event' hook */
-	ctrl |= (1 << 2) | (1 << 9);
-	writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	return 0;
-}
-
-static int cns3xxx_set_periodic(struct clock_event_device *clk)
-{
-	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	int pclk = cns3xxx_cpu_clock() / 8;
-	int reload;
-
-	reload = pclk * 20 / (3 * HZ) * 0x25000;
-	writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
-	ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
-	writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	return 0;
-}
-
-static int cns3xxx_timer_set_next_event(unsigned long evt,
-					struct clock_event_device *unused)
-{
-	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	writel(evt, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
-	writel(ctrl | (1 << 0), cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	return 0;
-}
-
-static struct clock_event_device cns3xxx_tmr1_clockevent = {
-	.name			= "cns3xxx timer1",
-	.features		= CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_ONESHOT,
-	.set_state_shutdown	= cns3xxx_shutdown,
-	.set_state_periodic	= cns3xxx_set_periodic,
-	.set_state_oneshot	= cns3xxx_set_oneshot,
-	.tick_resume		= cns3xxx_shutdown,
-	.set_next_event		= cns3xxx_timer_set_next_event,
-	.rating			= 350,
-	.cpumask		= cpu_all_mask,
-};
-
-static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
-{
-	cns3xxx_tmr1_clockevent.irq = timer_irq;
-	clockevents_config_and_register(&cns3xxx_tmr1_clockevent,
-					(cns3xxx_cpu_clock() >> 3) * 1000000,
-					0xf, 0xffffffff);
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &cns3xxx_tmr1_clockevent;
-	u32 __iomem *stat = cns3xxx_tmr1 + TIMER1_2_INTERRUPT_STATUS_OFFSET;
-	u32 val;
-
-	/* Clear the interrupt */
-	val = readl(stat);
-	writel(val & ~(1 << 2), stat);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up the clock source and clock events devices
- */
-static void __init __cns3xxx_timer_init(unsigned int timer_irq)
-{
-	u32 val;
-	u32 irq_mask;
-
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-
-	/* disable timer1 and timer2 */
-	writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	/* stop free running timer3 */
-	writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
-
-	/* timer1 */
-	writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
-	writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
-
-	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET);
-	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET);
-
-	/* mask irq, non-mask timer1 overflow */
-	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-	irq_mask &= ~(1 << 2);
-	irq_mask |= 0x03;
-	writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-
-	/* down counter */
-	val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	val |= (1 << 9);
-	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	/* timer2 */
-	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET);
-	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET);
-
-	/* mask irq */
-	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-	irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5));
-	writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-
-	/* down counter */
-	val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	val |= (1 << 10);
-	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	/* Make irqs happen for the system timer */
-	if (request_irq(timer_irq, cns3xxx_timer_interrupt,
-			IRQF_TIMER | IRQF_IRQPOLL, "timer", NULL))
-		pr_err("Failed to request irq %d (timer)\n", timer_irq);
-
-	cns3xxx_clockevents_init(timer_irq);
-}
-
-void __init cns3xxx_timer_init(void)
-{
-	cns3xxx_tmr1 = IOMEM(CNS3XXX_TIMER1_2_3_BASE_VIRT);
-
-	__cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0);
-}
-
-#ifdef CONFIG_CACHE_L2X0
-
-void __init cns3xxx_l2x0_init(void)
-{
-	void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
-	u32 val;
-
-	if (WARN_ON(!base))
-		return;
-
-	/*
-	 * Tag RAM Control register
-	 *
-	 * bit[10:8]	- 1 cycle of write accesses latency
-	 * bit[6:4]	- 1 cycle of read accesses latency
-	 * bit[3:0]	- 1 cycle of setup latency
-	 *
-	 * 1 cycle of latency for setup, read and write accesses
-	 */
-	val = readl(base + L310_TAG_LATENCY_CTRL);
-	val &= 0xfffff888;
-	writel(val, base + L310_TAG_LATENCY_CTRL);
-
-	/*
-	 * Data RAM Control register
-	 *
-	 * bit[10:8]	- 1 cycles of write accesses latency
-	 * bit[6:4]	- 1 cycles of read accesses latency
-	 * bit[3:0]	- 1 cycle of setup latency
-	 *
-	 * 1 cycle of latency for setup, read and write accesses
-	 */
-	val = readl(base + L310_DATA_LATENCY_CTRL);
-	val &= 0xfffff888;
-	writel(val, base + L310_DATA_LATENCY_CTRL);
-
-	/* 32 KiB, 8-way, parity disable */
-	l2x0_init(base, 0x00500000, 0xfe0f0fff);
-}
-
-#endif /* CONFIG_CACHE_L2X0 */
-
-static int csn3xxx_usb_power_on(struct platform_device *pdev)
-{
-	/*
-	 * EHCI and OHCI share the same clock and power,
-	 * resetting twice would cause the 1st controller been reset.
-	 * Therefore only do power up  at the first up device, and
-	 * power down at the last down device.
-	 *
-	 * Set USB AHB INCR length to 16
-	 */
-	if (atomic_inc_return(&usb_pwr_ref) == 1) {
-		cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
-		cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-		cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
-		__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
-			MISC_CHIP_CONFIG_REG);
-	}
-
-	return 0;
-}
-
-static void csn3xxx_usb_power_off(struct platform_device *pdev)
-{
-	/*
-	 * EHCI and OHCI share the same clock and power,
-	 * resetting twice would cause the 1st controller been reset.
-	 * Therefore only do power up  at the first up device, and
-	 * power down at the last down device.
-	 */
-	if (atomic_dec_return(&usb_pwr_ref) == 0)
-		cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-}
-
-static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = {
-	.power_on	= csn3xxx_usb_power_on,
-	.power_off	= csn3xxx_usb_power_off,
-};
-
-static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
-	.num_ports	= 1,
-	.power_on	= csn3xxx_usb_power_on,
-	.power_off	= csn3xxx_usb_power_off,
-};
-
-static const struct of_dev_auxdata cns3xxx_auxdata[] __initconst = {
-	{ "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata },
-	{ "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata },
-	{ "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL },
-	{ "cavium,cns3420-sdhci", CNS3XXX_SDIO_BASE, "ahci", NULL },
-	{},
-};
-
-static void __init cns3xxx_init(void)
-{
-	struct device_node *dn;
-
-	cns3xxx_l2x0_init();
-
-	dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-ahci");
-	if (of_device_is_available(dn)) {
-		u32 tmp;
-	
-		tmp = __raw_readl(MISC_SATA_POWER_MODE);
-		tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
-		tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
-		__raw_writel(tmp, MISC_SATA_POWER_MODE);
-	
-		/* Enable SATA PHY */
-		cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
-		cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
-	
-		/* Enable SATA Clock */
-		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
-	
-		/* De-Asscer SATA Reset */
-		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
-	}
-
-	dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci");
-	if (of_device_is_available(dn)) {
-		u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014);
-		u32 gpioa_pins = __raw_readl(gpioa);
-	
-		/* MMC/SD pins share with GPIOA */
-		gpioa_pins |= 0x1fff0004;
-		__raw_writel(gpioa_pins, gpioa);
-	
-		cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
-		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
-	}
-
-	pm_power_off = cns3xxx_power_off;
-
-	of_platform_default_populate(NULL, cns3xxx_auxdata, NULL);
-}
-
-static const char *const cns3xxx_dt_compat[] __initconst = {
-	"cavium,cns3410",
-	"cavium,cns3420",
-	NULL,
-};
-
-DT_MACHINE_START(CNS3XXX_DT, "Cavium Networks CNS3xxx")
-	.dt_compat	= cns3xxx_dt_compat,
-	.map_io		= cns3xxx_map_io,
-	.init_irq	= cns3xxx_init_irq,
-	.init_time	= cns3xxx_timer_init,
-	.init_machine	= cns3xxx_init,
-	.init_late	= cns3xxx_pcie_init_late,
-	.restart	= cns3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
deleted file mode 100644
index a96eabaea301..000000000000
--- a/arch/arm/mach-cns3xxx/core.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2004 ARM Limited
- * Copyright 2008 Cavium Networks
- */
-
-#ifndef __CNS3XXX_CORE_H
-#define __CNS3XXX_CORE_H
-
-#include <linux/reboot.h>
-
-extern void cns3xxx_timer_init(void);
-
-#ifdef CONFIG_CACHE_L2X0
-void __init cns3xxx_l2x0_init(void);
-#else
-static inline void cns3xxx_l2x0_init(void) {}
-#endif /* CONFIG_CACHE_L2X0 */
-
-#ifdef CONFIG_PCI
-extern void __init cns3xxx_pcie_init_late(void);
-#else
-static inline void __init cns3xxx_pcie_init_late(void) {}
-#endif
-
-void __init cns3xxx_map_io(void);
-void __init cns3xxx_init_irq(void);
-void cns3xxx_power_off(void);
-void cns3xxx_restart(enum reboot_mode, const char *);
-
-#endif /* __CNS3XXX_CORE_H */
diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c
deleted file mode 100644
index 0f1ba8a0377d..000000000000
--- a/arch/arm/mach-cns3xxx/devices.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * CNS3xxx common devices
- *
- * Copyright 2008 Cavium Networks
- *		  Scott Shu
- * Copyright 2010 MontaVista Software, LLC.
- *		  Anton Vorontsov <avorontsov@mvista.com>
- */
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/compiler.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include "cns3xxx.h"
-#include "pm.h"
-#include "core.h"
-#include "devices.h"
-
-/*
- * AHCI
- */
-static struct resource cns3xxx_ahci_resource[] = {
-	[0] = {
-		.start	= CNS3XXX_SATA2_BASE,
-		.end	= CNS3XXX_SATA2_BASE + CNS3XXX_SATA2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CNS3XXX_SATA,
-		.end	= IRQ_CNS3XXX_SATA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 cns3xxx_ahci_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device cns3xxx_ahci_pdev = {
-	.name		= "ahci",
-	.id		= 0,
-	.resource	= cns3xxx_ahci_resource,
-	.num_resources	= ARRAY_SIZE(cns3xxx_ahci_resource),
-	.dev		= {
-		.dma_mask		= &cns3xxx_ahci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init cns3xxx_ahci_init(void)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(MISC_SATA_POWER_MODE);
-	tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
-	tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
-	__raw_writel(tmp, MISC_SATA_POWER_MODE);
-
-	/* Enable SATA PHY */
-	cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
-	cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
-
-	/* Enable SATA Clock */
-	cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
-
-	/* De-Asscer SATA Reset */
-	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
-
-	platform_device_register(&cns3xxx_ahci_pdev);
-}
-
-/*
- * SDHCI
- */
-static struct resource cns3xxx_sdhci_resources[] = {
-	[0] = {
-		.start = CNS3XXX_SDIO_BASE,
-		.end   = CNS3XXX_SDIO_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_CNS3XXX_SDIO,
-		.end   = IRQ_CNS3XXX_SDIO,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cns3xxx_sdhci_pdev = {
-	.name		= "sdhci-cns3xxx",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(cns3xxx_sdhci_resources),
-	.resource	= cns3xxx_sdhci_resources,
-};
-
-void __init cns3xxx_sdhci_init(void)
-{
-	u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014);
-	u32 gpioa_pins = __raw_readl(gpioa);
-
-	/* MMC/SD pins share with GPIOA */
-	gpioa_pins |= 0x1fff0004;
-	__raw_writel(gpioa_pins, gpioa);
-
-	cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
-	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
-
-	platform_device_register(&cns3xxx_sdhci_pdev);
-}
diff --git a/arch/arm/mach-cns3xxx/devices.h b/arch/arm/mach-cns3xxx/devices.h
deleted file mode 100644
index ab16530d0116..000000000000
--- a/arch/arm/mach-cns3xxx/devices.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * CNS3xxx common devices
- *
- * Copyright 2008 Cavium Networks
- *		  Scott Shu
- * Copyright 2010 MontaVista Software, LLC.
- *		  Anton Vorontsov <avorontsov@mvista.com>
- */
-
-#ifndef __CNS3XXX_DEVICES_H_
-#define __CNS3XXX_DEVICES_H_
-
-void __init cns3xxx_ahci_init(void);
-void __init cns3xxx_sdhci_init(void);
-
-#endif /* __CNS3XXX_DEVICES_H_ */
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
deleted file mode 100644
index e92fbd679dfb..000000000000
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ /dev/null
@@ -1,290 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * PCI-E support for CNS3xxx
- *
- * Copyright 2008 Cavium Networks
- *		  Richard Liu <richard.liu@caviumnetworks.com>
- * Copyright 2010 MontaVista Software, LLC.
- *		  Anton Vorontsov <avorontsov@mvista.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/bug.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <asm/mach/map.h>
-#include "cns3xxx.h"
-#include "core.h"
-
-struct cns3xxx_pcie {
-	void __iomem *host_regs; /* PCI config registers for host bridge */
-	void __iomem *cfg0_regs; /* PCI Type 0 config registers */
-	void __iomem *cfg1_regs; /* PCI Type 1 config registers */
-	unsigned int irqs[2];
-	struct resource res_io;
-	struct resource res_mem;
-	int port;
-	bool linked;
-};
-
-static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata)
-{
-	struct pci_sys_data *root = sysdata;
-
-	return root->private_data;
-}
-
-static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev)
-{
-	return sysdata_to_cnspci(dev->sysdata);
-}
-
-static struct cns3xxx_pcie *pbus_to_cnspci(struct pci_bus *bus)
-{
-	return sysdata_to_cnspci(bus->sysdata);
-}
-
-static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus,
-					 unsigned int devfn, int where)
-{
-	struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
-	int busno = bus->number;
-	int slot = PCI_SLOT(devfn);
-	void __iomem *base;
-
-	/* If there is no link, just show the CNS PCI bridge. */
-	if (!cnspci->linked && busno > 0)
-		return NULL;
-
-	/*
-	 * The CNS PCI bridge doesn't fit into the PCI hierarchy, though
-	 * we still want to access it.
-	 * We place the host bridge on bus 0, and the directly connected
-	 * device on bus 1, slot 0.
-	 */
-	if (busno == 0) { /* internal PCIe bus, host bridge device */
-		if (devfn == 0) /* device# and function# are ignored by hw */
-			base = cnspci->host_regs;
-		else
-			return NULL; /* no such device */
-
-	} else if (busno == 1) { /* directly connected PCIe device */
-		if (slot == 0) /* device# is ignored by hw */
-			base = cnspci->cfg0_regs;
-		else
-			return NULL; /* no such device */
-	} else /* remote PCI bus */
-		base = cnspci->cfg1_regs + ((busno & 0xf) << 20);
-
-	return base + where + (devfn << 12);
-}
-
-static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-				   int where, int size, u32 *val)
-{
-	int ret;
-	u32 mask = (0x1ull << (size * 8)) - 1;
-	int shift = (where % 4) * 8;
-
-	ret = pci_generic_config_read(bus, devfn, where, size, val);
-
-	if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn &&
-	    (where & 0xffc) == PCI_CLASS_REVISION)
-		/*
-		 * RC's class is 0xb, but Linux PCI driver needs 0x604
-		 * for a PCIe bridge. So we must fixup the class code
-		 * to 0x604 here.
-		 */
-		*val = ((((*val << shift) & 0xff) | (0x604 << 16)) >> shift) & mask;
-
-	return ret;
-}
-
-static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	struct cns3xxx_pcie *cnspci = sysdata_to_cnspci(sys);
-	struct resource *res_io = &cnspci->res_io;
-	struct resource *res_mem = &cnspci->res_mem;
-
-	BUG_ON(request_resource(&iomem_resource, res_io) ||
-	       request_resource(&iomem_resource, res_mem));
-
-	pci_add_resource_offset(&sys->resources, res_io, sys->io_offset);
-	pci_add_resource_offset(&sys->resources, res_mem, sys->mem_offset);
-
-	return 1;
-}
-
-static struct pci_ops cns3xxx_pcie_ops = {
-	.map_bus = cns3xxx_pci_map_bus,
-	.read = cns3xxx_pci_read_config,
-	.write = pci_generic_config_write,
-};
-
-static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
-	int irq = cnspci->irqs[!!dev->bus->number];
-
-	pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n",
-		pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn),
-		PCI_FUNC(dev->devfn), slot, pin, irq);
-
-	return irq;
-}
-
-static struct cns3xxx_pcie cns3xxx_pcie[] = {
-	[0] = {
-		.host_regs = (void __iomem *)CNS3XXX_PCIE0_HOST_BASE_VIRT,
-		.cfg0_regs = (void __iomem *)CNS3XXX_PCIE0_CFG0_BASE_VIRT,
-		.cfg1_regs = (void __iomem *)CNS3XXX_PCIE0_CFG1_BASE_VIRT,
-		.res_io = {
-			.name = "PCIe0 I/O space",
-			.start = CNS3XXX_PCIE0_IO_BASE,
-			.end = CNS3XXX_PCIE0_CFG0_BASE - 1, /* 16 MiB */
-			.flags = IORESOURCE_IO,
-		},
-		.res_mem = {
-			.name = "PCIe0 non-prefetchable",
-			.start = CNS3XXX_PCIE0_MEM_BASE,
-			.end = CNS3XXX_PCIE0_HOST_BASE - 1, /* 176 MiB */
-			.flags = IORESOURCE_MEM,
-		},
-		.irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
-		.port = 0,
-	},
-	[1] = {
-		.host_regs = (void __iomem *)CNS3XXX_PCIE1_HOST_BASE_VIRT,
-		.cfg0_regs = (void __iomem *)CNS3XXX_PCIE1_CFG0_BASE_VIRT,
-		.cfg1_regs = (void __iomem *)CNS3XXX_PCIE1_CFG1_BASE_VIRT,
-		.res_io = {
-			.name = "PCIe1 I/O space",
-			.start = CNS3XXX_PCIE1_IO_BASE,
-			.end = CNS3XXX_PCIE1_CFG0_BASE - 1, /* 16 MiB */
-			.flags = IORESOURCE_IO,
-		},
-		.res_mem = {
-			.name = "PCIe1 non-prefetchable",
-			.start = CNS3XXX_PCIE1_MEM_BASE,
-			.end = CNS3XXX_PCIE1_HOST_BASE - 1, /* 176 MiB */
-			.flags = IORESOURCE_MEM,
-		},
-		.irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
-		.port = 1,
-	},
-};
-
-static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci)
-{
-	int port = cnspci->port;
-	u32 reg;
-	unsigned long time;
-
-	reg = __raw_readl(MISC_PCIE_CTRL(port));
-	/*
-	 * Enable Application Request to 1, it will exit L1 automatically,
-	 * but when chip back, it will use another clock, still can use 0x1.
-	 */
-	reg |= 0x3;
-	__raw_writel(reg, MISC_PCIE_CTRL(port));
-
-	pr_info("PCIe: Port[%d] Enable PCIe LTSSM\n", port);
-	pr_info("PCIe: Port[%d] Check data link layer...", port);
-
-	time = jiffies;
-	while (1) {
-		reg = __raw_readl(MISC_PCIE_PM_DEBUG(port));
-		if (reg & 0x1) {
-			pr_info("Link up.\n");
-			cnspci->linked = 1;
-			break;
-		} else if (time_after(jiffies, time + 50)) {
-			pr_info("Device not found.\n");
-			break;
-		}
-	}
-}
-
-static void cns3xxx_write_config(struct cns3xxx_pcie *cnspci,
-					 int where, int size, u32 val)
-{
-	void __iomem *base = cnspci->host_regs + (where & 0xffc);
-	u32 v;
-	u32 mask = (0x1ull << (size * 8)) - 1;
-	int shift = (where % 4) * 8;
-
-	v = readl_relaxed(base);
-
-	v &= ~(mask << shift);
-	v |= (val & mask) << shift;
-
-	writel_relaxed(v, base);
-	readl_relaxed(base);
-}
-
-static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
-{
-	u16 mem_base  = cnspci->res_mem.start >> 16;
-	u16 mem_limit = cnspci->res_mem.end   >> 16;
-	u16 io_base   = cnspci->res_io.start  >> 16;
-	u16 io_limit  = cnspci->res_io.end    >> 16;
-
-	cns3xxx_write_config(cnspci, PCI_PRIMARY_BUS, 1, 0);
-	cns3xxx_write_config(cnspci, PCI_SECONDARY_BUS, 1, 1);
-	cns3xxx_write_config(cnspci, PCI_SUBORDINATE_BUS, 1, 1);
-	cns3xxx_write_config(cnspci, PCI_MEMORY_BASE, 2, mem_base);
-	cns3xxx_write_config(cnspci, PCI_MEMORY_LIMIT, 2, mem_limit);
-	cns3xxx_write_config(cnspci, PCI_IO_BASE_UPPER16, 2, io_base);
-	cns3xxx_write_config(cnspci, PCI_IO_LIMIT_UPPER16, 2, io_limit);
-
-	if (!cnspci->linked)
-		return;
-
-	/* Set Device Max_Read_Request_Size to 128 byte */
-	pcie_bus_config = PCIE_BUS_PEER2PEER;
-
-	/* Disable PCIe0 Interrupt Mask INTA to INTD */
-	__raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(cnspci->port));
-}
-
-static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
-				      struct pt_regs *regs)
-{
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-	return 0;
-}
-
-void __init cns3xxx_pcie_init_late(void)
-{
-	int i;
-	void *private_data;
-	struct hw_pci hw_pci = {
-	       .nr_controllers = 1,
-	       .ops = &cns3xxx_pcie_ops,
-	       .setup = cns3xxx_pci_setup,
-	       .map_irq = cns3xxx_pcie_map_irq,
-	       .private_data = &private_data,
-	};
-
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0;
-
-	hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
-			"imprecise external abort");
-
-	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
-		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
-		cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
-		cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
-		cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
-		private_data = &cns3xxx_pcie[i];
-		pci_common_init(&hw_pci);
-	}
-
-	pci_assign_unassigned_resources();
-}
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
deleted file mode 100644
index 72e8a7ec7a38..000000000000
--- a/arch/arm/mach-cns3xxx/pm.c
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2008 Cavium Networks
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/atomic.h>
-#include "cns3xxx.h"
-#include "pm.h"
-#include "core.h"
-
-void cns3xxx_pwr_clk_en(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_CLK_GATE_REG);
-
-	reg |= (block & PM_CLK_GATE_REG_MASK);
-	__raw_writel(reg, PM_CLK_GATE_REG);
-}
-EXPORT_SYMBOL(cns3xxx_pwr_clk_en);
-
-void cns3xxx_pwr_clk_dis(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_CLK_GATE_REG);
-
-	reg &= ~(block & PM_CLK_GATE_REG_MASK);
-	__raw_writel(reg, PM_CLK_GATE_REG);
-}
-EXPORT_SYMBOL(cns3xxx_pwr_clk_dis);
-
-void cns3xxx_pwr_power_up(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
-
-	reg &= ~(block & CNS3XXX_PWR_PLL_ALL);
-	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
-
-	/* Wait for 300us for the PLL output clock locked. */
-	udelay(300);
-};
-EXPORT_SYMBOL(cns3xxx_pwr_power_up);
-
-void cns3xxx_pwr_power_down(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
-
-	/* write '1' to power down */
-	reg |= (block & CNS3XXX_PWR_PLL_ALL);
-	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
-};
-EXPORT_SYMBOL(cns3xxx_pwr_power_down);
-
-static void cns3xxx_pwr_soft_rst_force(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_SOFT_RST_REG);
-
-	/*
-	 * bit 0, 28, 29 => program low to reset,
-	 * the other else program low and then high
-	 */
-	if (block & 0x30000001) {
-		reg &= ~(block & PM_SOFT_RST_REG_MASK);
-	} else {
-		reg &= ~(block & PM_SOFT_RST_REG_MASK);
-		__raw_writel(reg, PM_SOFT_RST_REG);
-		reg |= (block & PM_SOFT_RST_REG_MASK);
-	}
-
-	__raw_writel(reg, PM_SOFT_RST_REG);
-}
-
-void cns3xxx_pwr_soft_rst(unsigned int block)
-{
-	static unsigned int soft_reset;
-
-	if (soft_reset & block) {
-		/* SPI/I2C/GPIO use the same block, reset once. */
-		return;
-	} else {
-		soft_reset |= block;
-	}
-	cns3xxx_pwr_soft_rst_force(block);
-}
-EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
-
-void cns3xxx_restart(enum reboot_mode mode, const char *cmd)
-{
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA.
-	 */
-	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(GLOBAL));
-}
-
-/*
- * cns3xxx_cpu_clock - return CPU/L2 clock
- *  aclk: cpu clock/2
- *  hclk: cpu clock/4
- *  pclk: cpu clock/8
- */
-int cns3xxx_cpu_clock(void)
-{
-	u32 reg = __raw_readl(PM_CLK_CTRL_REG);
-	int cpu;
-	int cpu_sel;
-	int div_sel;
-
-	cpu_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
-	div_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
-
-	cpu = (300 + ((cpu_sel / 3) * 100) + ((cpu_sel % 3) * 33)) >> div_sel;
-
-	return cpu;
-}
-EXPORT_SYMBOL(cns3xxx_cpu_clock);
-
-atomic_t usb_pwr_ref = ATOMIC_INIT(0);
-EXPORT_SYMBOL(usb_pwr_ref);
diff --git a/arch/arm/mach-cns3xxx/pm.h b/arch/arm/mach-cns3xxx/pm.h
deleted file mode 100644
index 61b73e59f0ff..000000000000
--- a/arch/arm/mach-cns3xxx/pm.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2004 ARM Limited
- * Copyright 2008 Cavium Networks
- */
-
-#ifndef __CNS3XXX_PM_H
-#define __CNS3XXX_PM_H
-
-#include <linux/atomic.h>
-
-void cns3xxx_pwr_clk_en(unsigned int block);
-void cns3xxx_pwr_clk_dis(unsigned int block);
-void cns3xxx_pwr_power_up(unsigned int block);
-void cns3xxx_pwr_power_down(unsigned int block);
-
-extern atomic_t usb_pwr_ref;
-
-#endif /* __CNS3XXX_PM_H */
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index de11030748d0..4316e1370627 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -3,40 +3,21 @@
 menuconfig ARCH_DAVINCI
 	bool "TI DaVinci"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select DAVINCI_TIMER
 	select ZONE_DMA
 	select PM_GENERIC_DOMAINS if PM
 	select PM_GENERIC_DOMAINS_OF if PM && OF
 	select REGMAP_MMIO
 	select RESET_CONTROLLER
-	select HAVE_IDE
 	select PINCTRL_SINGLE
 
 if ARCH_DAVINCI
 
-config ARCH_DAVINCI_DMx
-	bool
-
 comment "DaVinci Core Type"
 
-config ARCH_DAVINCI_DM644x
-	bool "DaVinci 644x based system"
-	select DAVINCI_AINTC
-	select ARCH_DAVINCI_DMx
-
-config ARCH_DAVINCI_DM355
-	bool "DaVinci 355 based system"
-	select DAVINCI_AINTC
-	select ARCH_DAVINCI_DMx
-
-config ARCH_DAVINCI_DM646x
-	bool "DaVinci 646x based system"
-	select DAVINCI_AINTC
-	select ARCH_DAVINCI_DMx
-
 config ARCH_DAVINCI_DA830
 	bool "DA830/OMAP-L137/AM17x based system"
-	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
 	select ARCH_DAVINCI_DA8XX
 	# needed on silicon revs 1.0, 1.1:
 	select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
@@ -44,170 +25,11 @@ config ARCH_DAVINCI_DA830
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
-	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
-	select ARCH_DAVINCI_DA8XX
 	select DAVINCI_CP_INTC
 
 config ARCH_DAVINCI_DA8XX
 	bool
 
-config ARCH_DAVINCI_DM365
-	bool "DaVinci 365 based system"
-	select DAVINCI_AINTC
-	select ARCH_DAVINCI_DMx
-
-comment "DaVinci Board Type"
-
-config MACH_DA8XX_DT
-	bool "Support DA8XX platforms using device tree"
-	default y
-	depends on ARCH_DAVINCI_DA850
-	select PINCTRL
-	help
-	  Say y here to include support for TI DaVinci DA850 based using
-	  Flattened Device Tree. More information at Documentation/devicetree
-
-config MACH_DAVINCI_EVM
-	bool "TI DM644x EVM"
-	default ARCH_DAVINCI_DM644x
-	depends on ARCH_DAVINCI_DM644x
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM644x EVM
-
-config MACH_SFFSDR
-	bool "Lyrtech SFFSDR"
-	depends on ARCH_DAVINCI_DM644x
-	help
-	  Say Y here to select the Lyrtech Small Form Factor
-	  Software Defined Radio (SFFSDR) board.
-
-config MACH_NEUROS_OSD2
-	bool "Neuros OSD2 Open Television Set Top Box"
-	depends on ARCH_DAVINCI_DM644x
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a Neuros OSD2 Open Set Top Box.
-
-config MACH_DAVINCI_DM355_EVM
-	bool "TI DM355 EVM"
-	default ARCH_DAVINCI_DM355
-	depends on ARCH_DAVINCI_DM355
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM355 EVM
-
-config MACH_DM355_LEOPARD
-	bool "DM355 Leopard board"
-	depends on ARCH_DAVINCI_DM355
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM355 Leopard board.
-
-config MACH_DAVINCI_DM6467_EVM
-	bool "TI DM6467 EVM"
-	default ARCH_DAVINCI_DM646x
-	depends on ARCH_DAVINCI_DM646x
-	select MACH_DAVINCI_DM6467TEVM
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM6467 EVM
-
-config MACH_DAVINCI_DM6467TEVM
-	bool
-
-config MACH_DAVINCI_DM365_EVM
-	bool "TI DM365 EVM"
-	default ARCH_DAVINCI_DM365
-	depends on ARCH_DAVINCI_DM365
-	help
-	  Configure this option to specify whether the board used
-	  for development is a DM365 EVM
-
-config MACH_DAVINCI_DA830_EVM
-	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
-	default ARCH_DAVINCI_DA830
-	depends on ARCH_DAVINCI_DA830
-	select GPIO_PCF857X if I2C
-	help
-	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
-
-choice
-	prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
-	depends on MACH_DAVINCI_DA830_EVM
-	help
-	  The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
-	  detected automatically based on successful probe of the I2C
-	  based GPIO expander on that board. This option selected in this
-	  menu has an effect only in case of a successful UI card detection.
-
-config DA830_UI_LCD
-	bool "LCD"
-	help
-	  Say Y here to use the LCD as a framebuffer or simple character
-	  display.
-
-config DA830_UI_NAND
-	bool "NAND flash"
-	help
-	  Say Y here to use the NAND flash. Do not forget to setup
-	  the switch correctly.
-endchoice
-
-config MACH_DAVINCI_DA850_EVM
-	bool "TI DA850/OMAP-L138/AM18x Reference Platform"
-	default ARCH_DAVINCI_DA850
-	depends on ARCH_DAVINCI_DA850
-	help
-	  Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
-
-choice
-	prompt "Select peripherals connected to expander on UI board"
-	depends on MACH_DAVINCI_DA850_EVM
-	help
-	  The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
-	  EVM is detected automatically based on successful probe of the I2C
-	  based GPIO expander on that card. This option selected in this
-	  menu has an effect only in case of a successful UI card detection.
-
-config DA850_UI_NONE
-	bool "No peripheral is enabled"
-	help
-	  Say Y if you do not want to enable any of the peripherals connected
-	  to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
-
-config DA850_UI_RMII
-	bool "RMII Ethernet PHY"
-	help
-	  Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
-	  EVM. This PHY is found on the UI daughter card that is supplied with
-	  the EVM.
-	  NOTE: Please take care while choosing this option, MII PHY will
-	  not be functional if RMII mode is selected.
-
-config DA850_UI_SD_VIDEO_PORT
-	bool "Video Port Interface"
-	help
-	  Say Y if you want to use Video Port Interface (VPIF) on the
-	  DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
-	  UI daughter card that is supplied with the EVM.
-
-endchoice
-
-config MACH_MITYOMAPL138
-	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
-	depends on ARCH_DAVINCI_DA850
-	help
-	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
-	  System on Module.  Information on this SoM may be found at
-	  https://www.mitydsp.com
-
-config MACH_OMAPL138_HAWKBOARD
-	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
-	depends on ARCH_DAVINCI_DA850
-	help
-	  Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
-
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
 	depends on ARCH_DAVINCI
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 58838a9de651..450883ea0e73 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -3,35 +3,17 @@
 # Makefile for the linux kernel.
 #
 #
-
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-
+#
 # Common objects
-obj-y 					:= serial.o usb.o common.o sram.o
+obj-y 					:= common.o sram.o devices-da8xx.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Chip specific
-obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DA830)	+= da830.o devices-da8xx.o usb-da8xx.o
-obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= da850.o devices-da8xx.o usb-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA830)	+= da830.o
+obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= da850.o pdata-quirks.o
 
-# Board specific
-obj-$(CONFIG_MACH_DA8XX_DT)		+= da8xx-dt.o pdata-quirks.o
-obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
-obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
-obj-$(CONFIG_MACH_NEUROS_OSD2)		+= board-neuros-osd2.o
-obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
-obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
-obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
-obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
-obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
-obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
-obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
-obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
+obj-y					+= da8xx-dt.o
 
 # Power Management
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot
deleted file mode 100644
index d36b251f325b..000000000000
--- a/arch/arm/mach-davinci/Makefile.boot
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-zreladdr-$(CONFIG_ARCH_DAVINCI_DA8XX)		+= 0xc0008000
-params_phys-$(CONFIG_ARCH_DAVINCI_DA8XX)	:= 0xc0000100
-initrd_phys-$(CONFIG_ARCH_DAVINCI_DA8XX)	:= 0xc0800000
-
-zreladdr-$(CONFIG_ARCH_DAVINCI_DMx)		+= 0x80008000
-params_phys-$(CONFIG_ARCH_DAVINCI_DMx)		:= 0x80000100
-initrd_phys-$(CONFIG_ARCH_DAVINCI_DMx)		:= 0x80800000
diff --git a/arch/arm/mach-davinci/asp.h b/arch/arm/mach-davinci/asp.h
deleted file mode 100644
index d0ecd1d0f084..000000000000
--- a/arch/arm/mach-davinci/asp.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * TI DaVinci Audio definitions
- */
-#ifndef __ASM_ARCH_DAVINCI_ASP_H
-#define __ASM_ARCH_DAVINCI_ASP_H
-
-/* Bases of dm644x and dm355 register banks */
-#define DAVINCI_ASP0_BASE	0x01E02000
-#define DAVINCI_ASP1_BASE	0x01E04000
-
-/* Bases of dm365 register banks */
-#define DAVINCI_DM365_ASP0_BASE	0x01D02000
-
-/* Bases of dm646x register banks */
-#define DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
-#define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
-
-/* Bases of da850/da830 McASP0  register banks */
-#define DAVINCI_DA8XX_MCASP0_REG_BASE	0x01D00000
-
-/* Bases of da830 McASP1 register banks */
-#define DAVINCI_DA830_MCASP1_REG_BASE	0x01D04000
-
-/* Bases of da830 McASP2 register banks */
-#define DAVINCI_DA830_MCASP2_REG_BASE	0x01D08000
-
-/* EDMA channels of dm644x and dm355 */
-#define DAVINCI_DMA_ASP0_TX	2
-#define DAVINCI_DMA_ASP0_RX	3
-#define DAVINCI_DMA_ASP1_TX	8
-#define DAVINCI_DMA_ASP1_RX	9
-
-/* EDMA channels of dm646x */
-#define DAVINCI_DM646X_DMA_MCASP0_AXEVT0	6
-#define DAVINCI_DM646X_DMA_MCASP0_AREVT0	9
-#define DAVINCI_DM646X_DMA_MCASP1_AXEVT1	12
-
-/* EDMA channels of da850/da830 McASP0 */
-#define DAVINCI_DA8XX_DMA_MCASP0_AREVT	0
-#define DAVINCI_DA8XX_DMA_MCASP0_AXEVT	1
-
-/* EDMA channels of da830 McASP1 */
-#define DAVINCI_DA830_DMA_MCASP1_AREVT	2
-#define DAVINCI_DA830_DMA_MCASP1_AXEVT	3
-
-/* EDMA channels of da830 McASP2 */
-#define DAVINCI_DA830_DMA_MCASP2_AREVT	4
-#define DAVINCI_DA830_DMA_MCASP2_AXEVT	5
-
-/* Interrupts */
-#define DAVINCI_ASP0_RX_INT	DAVINCI_INTC_IRQ(IRQ_MBRINT)
-#define DAVINCI_ASP0_TX_INT	DAVINCI_INTC_IRQ(IRQ_MBXINT)
-#define DAVINCI_ASP1_RX_INT	DAVINCI_INTC_IRQ(IRQ_MBRINT)
-#define DAVINCI_ASP1_TX_INT	DAVINCI_INTC_IRQ(IRQ_MBXINT)
-
-#endif /* __ASM_ARCH_DAVINCI_ASP_H */
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
deleted file mode 100644
index a20ba12d876c..000000000000
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ /dev/null
@@ -1,690 +0,0 @@
-/*
- * TI DA830/OMAP L137 EVM board
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c
- *
- * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/property.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/nvmem-provider.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/mux.h>
-#include <mach/da8xx.h>
-
-#include "irqs.h"
-
-#define DA830_EVM_PHY_ID		""
-/*
- * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
- */
-#define ON_BD_USB_DRV	GPIO_TO_PIN(1, 15)
-#define ON_BD_USB_OVC	GPIO_TO_PIN(2, 4)
-
-static const short da830_evm_usb11_pins[] = {
-	DA830_GPIO1_15, DA830_GPIO2_4,
-	-1
-};
-
-static struct regulator_consumer_supply da830_evm_usb_supplies[] = {
-	REGULATOR_SUPPLY("vbus", NULL),
-};
-
-static struct regulator_init_data da830_evm_usb_vbus_data = {
-	.consumer_supplies	= da830_evm_usb_supplies,
-	.num_consumer_supplies	= ARRAY_SIZE(da830_evm_usb_supplies),
-	.constraints    = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config da830_evm_usb_vbus = {
-	.supply_name		= "vbus",
-	.microvolts		= 33000000,
-	.init_data		= &da830_evm_usb_vbus_data,
-};
-
-static struct platform_device da830_evm_usb_vbus_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &da830_evm_usb_vbus,
-	},
-};
-
-static struct gpiod_lookup_table da830_evm_usb_oc_gpio_lookup = {
-	.dev_id		= "ohci-da8xx",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table da830_evm_usb_vbus_gpio_lookup = {
-	.dev_id		= "reg-fixed-voltage.0",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, NULL, 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table *da830_evm_usb_gpio_lookups[] = {
-	&da830_evm_usb_oc_gpio_lookup,
-	&da830_evm_usb_vbus_gpio_lookup,
-};
-
-static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
-	/* TPS2065 switch @ 5V */
-	.potpgt		= (3 + 1) / 2,	/* 3 ms max */
-};
-
-static __init void da830_evm_usb_init(void)
-{
-	int ret;
-
-	ret = da8xx_register_usb_phy_clocks();
-	if (ret)
-		pr_warn("%s: USB PHY CLK registration failed: %d\n",
-			__func__, ret);
-
-	gpiod_add_lookup_tables(da830_evm_usb_gpio_lookups,
-				ARRAY_SIZE(da830_evm_usb_gpio_lookups));
-
-	ret = da8xx_register_usb_phy();
-	if (ret)
-		pr_warn("%s: USB PHY registration failed: %d\n",
-			__func__, ret);
-
-	ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
-	if (ret)
-		pr_warn("%s: USB 2.0 PinMux setup failed: %d\n", __func__, ret);
-	else {
-		/*
-		 * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A),
-		 * with the power on to power good time of 3 ms.
-		 */
-		ret = da8xx_register_usb20(1000, 3);
-		if (ret)
-			pr_warn("%s: USB 2.0 registration failed: %d\n",
-				__func__, ret);
-	}
-
-	ret = davinci_cfg_reg_list(da830_evm_usb11_pins);
-	if (ret) {
-		pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	ret = platform_device_register(&da830_evm_usb_vbus_device);
-	if (ret) {
-		pr_warn("%s: Unable to register the vbus supply\n", __func__);
-		return;
-	}
-
-	ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
-	if (ret)
-		pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
-}
-
-static const short da830_evm_mcasp1_pins[] = {
-	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
-	DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
-	DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10,
-	DA830_AXR1_11,
-	-1
-};
-
-static u8 da830_iis_serializer_direction[] = {
-	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	TX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-};
-
-static struct snd_platform_data da830_evm_snd_data = {
-	.tx_dma_offset  = 0x2000,
-	.rx_dma_offset  = 0x2000,
-	.op_mode        = DAVINCI_MCASP_IIS_MODE,
-	.num_serializer = ARRAY_SIZE(da830_iis_serializer_direction),
-	.tdm_slots      = 2,
-	.serial_dir     = da830_iis_serializer_direction,
-	.asp_chan_q     = EVENTQ_0,
-	.version	= MCASP_VERSION_2,
-	.txnumevt	= 1,
-	.rxnumevt	= 1,
-};
-
-/*
- * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS.
- */
-static const short da830_evm_mmc_sd_pins[] = {
-	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
-	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
-	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
-	DA830_MMCSD_CMD,   DA830_GPIO2_1,     DA830_GPIO2_2,
-	-1
-};
-
-#define DA830_MMCSD_WP_PIN		GPIO_TO_PIN(2, 1)
-#define DA830_MMCSD_CD_PIN		GPIO_TO_PIN(2, 2)
-
-static struct gpiod_lookup_table mmc_gpios_table = {
-	.dev_id = "da830-mmc.0",
-	.table = {
-		/* gpio chip 1 contains gpio range 32-63 */
-		GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_CD_PIN, "cd",
-			    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp",
-			    GPIO_ACTIVE_LOW),
-		{ }
-	},
-};
-
-static struct davinci_mmc_config da830_evm_mmc_config = {
-	.wires			= 8,
-	.max_freq		= 50000000,
-	.caps			= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static inline void da830_evm_init_mmc(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(da830_evm_mmc_sd_pins);
-	if (ret) {
-		pr_warn("%s: mmc/sd mux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	gpiod_add_lookup_table(&mmc_gpios_table);
-
-	ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
-	if (ret) {
-		pr_warn("%s: mmc/sd registration failed: %d\n", __func__, ret);
-		gpiod_remove_lookup_table(&mmc_gpios_table);
-	}
-}
-
-#define HAS_MMC		IS_ENABLED(CONFIG_MMC_DAVINCI)
-
-#ifdef CONFIG_DA830_UI_NAND
-static struct mtd_partition da830_evm_nand_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	[0] = {
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* bootloader params in the next sector */
-	[1] = {
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* kernel */
-	[2] = {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0,
-	},
-	/* file system */
-	[3] = {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-};
-
-/* flash bbt descriptors */
-static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' };
-static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' };
-
-static struct nand_bbt_descr da830_evm_nand_bbt_main_descr = {
-	.options	= NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
-			  NAND_BBT_WRITE | NAND_BBT_2BIT |
-			  NAND_BBT_VERSION | NAND_BBT_PERCHIP,
-	.offs		= 2,
-	.len		= 4,
-	.veroffs	= 16,
-	.maxblocks	= 4,
-	.pattern	= da830_evm_nand_bbt_pattern
-};
-
-static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = {
-	.options	= NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
-			  NAND_BBT_WRITE | NAND_BBT_2BIT |
-			  NAND_BBT_VERSION | NAND_BBT_PERCHIP,
-	.offs		= 2,
-	.len		= 4,
-	.veroffs	= 16,
-	.maxblocks	= 4,
-	.pattern	= da830_evm_nand_mirror_pattern
-};
-
-static struct davinci_aemif_timing da830_evm_nandflash_timing = {
-	.wsetup         = 24,
-	.wstrobe        = 21,
-	.whold          = 14,
-	.rsetup         = 19,
-	.rstrobe        = 50,
-	.rhold          = 0,
-	.ta             = 20,
-};
-
-static struct davinci_nand_pdata da830_evm_nand_pdata = {
-	.core_chipsel	= 1,
-	.parts		= da830_evm_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(da830_evm_nand_partitions),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits	= 4,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.bbt_td		= &da830_evm_nand_bbt_main_descr,
-	.bbt_md		= &da830_evm_nand_bbt_mirror_descr,
-	.timing         = &da830_evm_nandflash_timing,
-};
-
-static struct resource da830_evm_nand_resources[] = {
-	[0] = {		/* First memory resource is NAND I/O window */
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + PAGE_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {		/* Second memory resource is AEMIF control registers */
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da830_evm_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 1,
-		.dev		= {
-			.platform_data	= &da830_evm_nand_pdata,
-		},
-		.num_resources	= ARRAY_SIZE(da830_evm_nand_resources),
-		.resource	= da830_evm_nand_resources,
-	},
-};
-
-static struct resource da830_evm_aemif_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct aemif_abus_data da830_evm_aemif_abus_data[] = {
-	{
-		.cs	= 3,
-	},
-};
-
-static struct aemif_platform_data da830_evm_aemif_pdata = {
-	.abus_data		= da830_evm_aemif_abus_data,
-	.num_abus_data		= ARRAY_SIZE(da830_evm_aemif_abus_data),
-	.sub_devices		= da830_evm_aemif_devices,
-	.num_sub_devices	= ARRAY_SIZE(da830_evm_aemif_devices),
-	.cs_offset		= 2,
-};
-
-static struct platform_device da830_evm_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data = &da830_evm_aemif_pdata,
-	},
-	.resource	= da830_evm_aemif_resource,
-	.num_resources	= ARRAY_SIZE(da830_evm_aemif_resource),
-};
-
-/*
- * UI board NAND/NOR flashes only use 8-bit data bus.
- */
-static const short da830_evm_emif25_pins[] = {
-	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
-	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
-	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
-	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
-	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
-	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE,
-	DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0,
-	-1
-};
-
-static inline void da830_evm_init_nand(int mux_mode)
-{
-	int ret;
-
-	if (HAS_MMC) {
-		pr_warn("WARNING: both MMC/SD and NAND are enabled, but they share AEMIF pins\n"
-			"\tDisable MMC/SD for NAND support\n");
-		return;
-	}
-
-	ret = davinci_cfg_reg_list(da830_evm_emif25_pins);
-	if (ret)
-		pr_warn("%s: emif25 mux setup failed: %d\n", __func__, ret);
-
-	ret = platform_device_register(&da830_evm_aemif_device);
-	if (ret)
-		pr_warn("%s: AEMIF device not registered\n", __func__);
-
-	gpio_direction_output(mux_mode, 1);
-}
-#else
-static inline void da830_evm_init_nand(int mux_mode) { }
-#endif
-
-#ifdef CONFIG_DA830_UI_LCD
-static inline void da830_evm_init_lcdc(int mux_mode)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(da830_lcdcntl_pins);
-	if (ret)
-		pr_warn("%s: lcdcntl mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata);
-	if (ret)
-		pr_warn("%s: lcd setup failed: %d\n", __func__, ret);
-
-	gpio_direction_output(mux_mode, 0);
-}
-#else
-static inline void da830_evm_init_lcdc(int mux_mode) { }
-#endif
-
-static struct nvmem_cell_info da830_evm_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x7f00,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table da830_evm_nvmem_cell_table = {
-	.nvmem_name	= "1-00500",
-	.cells		= da830_evm_nvmem_cells,
-	.ncells		= ARRAY_SIZE(da830_evm_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup da830_evm_nvmem_cell_lookup = {
-	.nvmem_name	= "1-00500",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static const struct property_entry da830_evm_i2c_eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 64),
-	{ }
-};
-
-static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
-		int gpio, unsigned ngpio, void *context)
-{
-	gpio_request(gpio + 6, "UI MUX_MODE");
-
-	/* Drive mux mode low to match the default without UI card */
-	gpio_direction_output(gpio + 6, 0);
-
-	da830_evm_init_lcdc(gpio + 6);
-
-	da830_evm_init_nand(gpio + 6);
-
-	return 0;
-}
-
-static int da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio,
-		unsigned ngpio, void *context)
-{
-	gpio_free(gpio + 6);
-	return 0;
-}
-
-static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
-	.gpio_base	= DAVINCI_N_GPIO,
-	.setup		= da830_evm_ui_expander_setup,
-	.teardown	= da830_evm_ui_expander_teardown,
-};
-
-static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.properties = da830_evm_i2c_eeprom_properties,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	},
-	{
-		I2C_BOARD_INFO("pcf8574", 0x3f),
-		.platform_data	= &da830_evm_ui_expander_info,
-	},
-};
-
-static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
-};
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da830/omap-l137 EVM, hence
- * they are being reserved for codecs on the DSP side.
- */
-static const s16 da830_dma_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 8,  2},
-	{12,  2},
-	{24,  4},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da830_dma_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 8,  2},
-	{12,  2},
-	{24,  4},
-	{30, 26},
-	{-1, -1}
-};
-
-static struct edma_rsv_info da830_edma_rsv[] = {
-	{
-		.rsv_chans	= da830_dma_rsv_chans,
-		.rsv_slots	= da830_dma_rsv_slots,
-	},
-};
-
-static struct mtd_partition da830evm_spiflash_part[] = {
-	[0] = {
-		.name = "DSP-UBL",
-		.offset = 0,
-		.size = SZ_8K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[1] = {
-		.name = "ARM-UBL",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_16K + SZ_8K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[2] = {
-		.name = "U-Boot",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_256K - SZ_32K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[3] = {
-		.name = "U-Boot-Environment",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_16K,
-		.mask_flags = 0,
-	},
-	[4] = {
-		.name = "Kernel",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-		.mask_flags = 0,
-	},
-};
-
-static struct flash_platform_data da830evm_spiflash_data = {
-	.name		= "m25p80",
-	.parts		= da830evm_spiflash_part,
-	.nr_parts	= ARRAY_SIZE(da830evm_spiflash_part),
-	.type		= "w25x32",
-};
-
-static struct davinci_spi_config da830evm_spiflash_cfg = {
-	.io_type	= SPI_IO_TYPE_DMA,
-	.c2tdelay	= 8,
-	.t2cdelay	= 8,
-};
-
-static struct spi_board_info da830evm_spi_info[] = {
-	{
-		.modalias		= "m25p80",
-		.platform_data		= &da830evm_spiflash_data,
-		.controller_data	= &da830evm_spiflash_cfg,
-		.mode			= SPI_MODE_0,
-		.max_speed_hz		= 30000000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-	},
-};
-
-static __init void da830_evm_init(void)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	int ret;
-
-	da830_register_clocks();
-
-	ret = da830_register_gpio();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	ret = da830_register_edma(da830_edma_rsv);
-	if (ret)
-		pr_warn("%s: edma registration failed: %d\n", __func__, ret);
-
-	ret = davinci_cfg_reg_list(da830_i2c0_pins);
-	if (ret)
-		pr_warn("%s: i2c0 mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata);
-	if (ret)
-		pr_warn("%s: i2c0 registration failed: %d\n", __func__, ret);
-
-	da830_evm_usb_init();
-
-	soc_info->emac_pdata->rmii_en = 1;
-	soc_info->emac_pdata->phy_id = DA830_EVM_PHY_ID;
-
-	ret = davinci_cfg_reg_list(da830_cpgmac_pins);
-	if (ret)
-		pr_warn("%s: cpgmac mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warn("%s: emac registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warn("%s: watchdog registration failed: %d\n",
-			__func__, ret);
-
-	davinci_serial_init(da8xx_serial_device);
-
-	nvmem_add_cell_table(&da830_evm_nvmem_cell_table);
-	nvmem_add_cell_lookups(&da830_evm_nvmem_cell_lookup, 1);
-
-	i2c_register_board_info(1, da830_evm_i2c_devices,
-			ARRAY_SIZE(da830_evm_i2c_devices));
-
-	ret = davinci_cfg_reg_list(da830_evm_mcasp1_pins);
-	if (ret)
-		pr_warn("%s: mcasp1 mux setup failed: %d\n", __func__, ret);
-
-	da8xx_register_mcasp(1, &da830_evm_snd_data);
-
-	da830_evm_init_mmc();
-
-	ret = da8xx_register_rtc();
-	if (ret)
-		pr_warn("%s: rtc setup failed: %d\n", __func__, ret);
-
-	ret = spi_register_board_info(da830evm_spi_info,
-				      ARRAY_SIZE(da830evm_spi_info));
-	if (ret)
-		pr_warn("%s: spi info registration failed: %d\n",
-			__func__, ret);
-
-	ret = da8xx_register_spi_bus(0, ARRAY_SIZE(da830evm_spi_info));
-	if (ret)
-		pr_warn("%s: spi 0 registration failed: %d\n", __func__, ret);
-
-	regulator_has_full_constraints();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init da830_evm_console_init(void)
-{
-	if (!machine_is_davinci_da830_evm())
-		return 0;
-
-	return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(da830_evm_console_init);
-#endif
-
-static void __init da830_evm_map_io(void)
-{
-	da830_init();
-}
-
-MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
-	.atag_offset	= 0x100,
-	.map_io		= da830_evm_map_io,
-	.init_irq	= da830_init_irq,
-	.init_time	= da830_init_time,
-	.init_machine	= da830_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
deleted file mode 100644
index 428012687a80..000000000000
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ /dev/null
@@ -1,1555 +0,0 @@
-/*
- * TI DA850/OMAP-L138 EVM board
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/
- *
- * Derived from: arch/arm/mach-davinci/board-da830-evm.c
- * Original Copyrights follow:
- *
- * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/leds.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/input.h>
-#include <linux/input/tps6507x-ts.h>
-#include <linux/mfd/tps6507x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/nvmem-provider.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_data/uio_pruss.h>
-#include <linux/property.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/tps6507x.h>
-#include <linux/regulator/fixed.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <mach/common.h>
-#include <mach/da8xx.h>
-#include <mach/mux.h>
-
-#include "irqs.h"
-#include "sram.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/system_info.h>
-
-#include <media/i2c/tvp514x.h>
-#include <media/i2c/adv7343.h>
-
-#define DA850_EVM_PHY_ID		"davinci_mdio-0:00"
-#define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
-#define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
-
-#define DA850_MII_MDIO_CLKEN_PIN	GPIO_TO_PIN(2, 6)
-
-static struct mtd_partition da850evm_spiflash_part[] = {
-	[0] = {
-		.name = "UBL",
-		.offset = 0,
-		.size = SZ_64K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[1] = {
-		.name = "U-Boot",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_512K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[2] = {
-		.name = "U-Boot-Env",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_64K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[3] = {
-		.name = "Kernel",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_2M + SZ_512K,
-		.mask_flags = 0,
-	},
-	[4] = {
-		.name = "Filesystem",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_4M,
-		.mask_flags = 0,
-	},
-	[5] = {
-		.name = "MAC-Address",
-		.offset = SZ_8M - SZ_64K,
-		.size = SZ_64K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-};
-
-static struct nvmem_cell_info da850evm_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x0,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table da850evm_nvmem_cell_table = {
-	/*
-	 * The nvmem name differs from the partition name because of the
-	 * internal works of the nvmem framework.
-	 */
-	.nvmem_name	= "MAC-Address0",
-	.cells		= da850evm_nvmem_cells,
-	.ncells		= ARRAY_SIZE(da850evm_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup da850evm_nvmem_cell_lookup = {
-	.nvmem_name	= "MAC-Address0",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static struct flash_platform_data da850evm_spiflash_data = {
-	.name		= "m25p80",
-	.parts		= da850evm_spiflash_part,
-	.nr_parts	= ARRAY_SIZE(da850evm_spiflash_part),
-	.type		= "m25p64",
-};
-
-static struct davinci_spi_config da850evm_spiflash_cfg = {
-	.io_type	= SPI_IO_TYPE_DMA,
-	.c2tdelay	= 8,
-	.t2cdelay	= 8,
-};
-
-static struct spi_board_info da850evm_spi_info[] = {
-	{
-		.modalias		= "m25p80",
-		.platform_data		= &da850evm_spiflash_data,
-		.controller_data	= &da850evm_spiflash_cfg,
-		.mode			= SPI_MODE_0,
-		.max_speed_hz		= 30000000,
-		.bus_num		= 1,
-		.chip_select		= 0,
-	},
-};
-
-static struct mtd_partition da850_evm_norflash_partition[] = {
-	{
-		.name           = "bootloaders + env",
-		.offset         = 0,
-		.size           = SZ_512K,
-		.mask_flags     = MTD_WRITEABLE,
-	},
-	{
-		.name           = "kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = SZ_2M,
-		.mask_flags     = 0,
-	},
-	{
-		.name           = "filesystem",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-		.mask_flags     = 0,
-	},
-};
-
-static struct physmap_flash_data da850_evm_norflash_data = {
-	.width		= 2,
-	.parts		= da850_evm_norflash_partition,
-	.nr_parts	= ARRAY_SIZE(da850_evm_norflash_partition),
-};
-
-static struct resource da850_evm_norflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS2_BASE,
-		.end	= DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
- * (128K blocks). It may be used instead of the (default) SPI flash
- * to boot, using TI's tools to install the secondary boot loader
- * (UBL) and U-Boot.
- */
-static struct mtd_partition da850_evm_nandflash_partition[] = {
-	{
-		.name		= "u-boot env",
-		.offset		= 0,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	 },
-	{
-		.name		= "UBL",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 4 * SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel",
-		.offset		= 0x200000,
-		.size		= SZ_2M,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static struct davinci_aemif_timing da850_evm_nandflash_timing = {
-	.wsetup		= 24,
-	.wstrobe	= 21,
-	.whold		= 14,
-	.rsetup		= 19,
-	.rstrobe	= 50,
-	.rhold		= 0,
-	.ta		= 20,
-};
-
-static struct davinci_nand_pdata da850_evm_nandflash_data = {
-	.core_chipsel	= 1,
-	.parts		= da850_evm_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits	= 4,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.timing		= &da850_evm_nandflash_timing,
-};
-
-static struct resource da850_evm_nandflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource da850_evm_aemif_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct aemif_abus_data da850_evm_aemif_abus_data[] = {
-	{
-		.cs	= 3,
-	}
-};
-
-static struct platform_device da850_evm_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 1,
-		.dev		= {
-			.platform_data	= &da850_evm_nandflash_data,
-		},
-		.num_resources	= ARRAY_SIZE(da850_evm_nandflash_resource),
-		.resource	= da850_evm_nandflash_resource,
-	},
-	{
-		.name		= "physmap-flash",
-		.id		= 0,
-		.dev		= {
-			.platform_data  = &da850_evm_norflash_data,
-		},
-		.num_resources	= 1,
-		.resource	= da850_evm_norflash_resource,
-	}
-};
-
-static struct aemif_platform_data da850_evm_aemif_pdata = {
-	.cs_offset = 2,
-	.abus_data = da850_evm_aemif_abus_data,
-	.num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data),
-	.sub_devices = da850_evm_aemif_devices,
-	.num_sub_devices = ARRAY_SIZE(da850_evm_aemif_devices),
-};
-
-static struct platform_device da850_evm_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data	= &da850_evm_aemif_pdata,
-	},
-	.resource	= da850_evm_aemif_resource,
-	.num_resources	= ARRAY_SIZE(da850_evm_aemif_resource),
-};
-
-static const short da850_evm_nand_pins[] = {
-	DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
-	DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
-	DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4,
-	DA850_NEMA_WE, DA850_NEMA_OE,
-	-1
-};
-
-static const short da850_evm_nor_pins[] = {
-	DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2,
-	DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1,
-	DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5,
-	DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9,
-	DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13,
-	DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1,
-	DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5,
-	DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9,
-	DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13,
-	DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17,
-	DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21,
-	DA850_EMA_A_22, DA850_EMA_A_23,
-	-1
-};
-
-#define HAS_MMC		IS_ENABLED(CONFIG_MMC_DAVINCI)
-
-static inline void da850_evm_setup_nor_nand(void)
-{
-	int ret = 0;
-
-	if (!HAS_MMC) {
-		ret = davinci_cfg_reg_list(da850_evm_nand_pins);
-		if (ret)
-			pr_warn("%s: NAND mux setup failed: %d\n",
-				__func__, ret);
-
-		ret = davinci_cfg_reg_list(da850_evm_nor_pins);
-		if (ret)
-			pr_warn("%s: NOR mux setup failed: %d\n",
-				__func__, ret);
-
-		ret = platform_device_register(&da850_evm_aemif_device);
-		if (ret)
-			pr_warn("%s: registering aemif failed: %d\n",
-				__func__, ret);
-	}
-}
-
-#ifdef CONFIG_DA850_UI_RMII
-static inline void da850_evm_setup_emac_rmii(int rmii_sel)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	soc_info->emac_pdata->rmii_en = 1;
-	gpio_set_value_cansleep(rmii_sel, 0);
-}
-#else
-static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
-#endif
-
-
-#define DA850_KEYS_DEBOUNCE_MS	10
-/*
- * At 200ms polling interval it is possible to miss an
- * event by tapping very lightly on the push button but most
- * pushes do result in an event; longer intervals require the
- * user to hold the button whereas shorter intervals require
- * more CPU time for polling.
- */
-#define DA850_GPIO_KEYS_POLL_MS	200
-
-enum da850_evm_ui_exp_pins {
-	DA850_EVM_UI_EXP_SEL_C = 5,
-	DA850_EVM_UI_EXP_SEL_B,
-	DA850_EVM_UI_EXP_SEL_A,
-	DA850_EVM_UI_EXP_PB8,
-	DA850_EVM_UI_EXP_PB7,
-	DA850_EVM_UI_EXP_PB6,
-	DA850_EVM_UI_EXP_PB5,
-	DA850_EVM_UI_EXP_PB4,
-	DA850_EVM_UI_EXP_PB3,
-	DA850_EVM_UI_EXP_PB2,
-	DA850_EVM_UI_EXP_PB1,
-};
-
-static const char * const da850_evm_ui_exp[] = {
-	[DA850_EVM_UI_EXP_SEL_C]        = "sel_c",
-	[DA850_EVM_UI_EXP_SEL_B]        = "sel_b",
-	[DA850_EVM_UI_EXP_SEL_A]        = "sel_a",
-	[DA850_EVM_UI_EXP_PB8]          = "pb8",
-	[DA850_EVM_UI_EXP_PB7]          = "pb7",
-	[DA850_EVM_UI_EXP_PB6]          = "pb6",
-	[DA850_EVM_UI_EXP_PB5]          = "pb5",
-	[DA850_EVM_UI_EXP_PB4]          = "pb4",
-	[DA850_EVM_UI_EXP_PB3]          = "pb3",
-	[DA850_EVM_UI_EXP_PB2]          = "pb2",
-	[DA850_EVM_UI_EXP_PB1]          = "pb1",
-};
-
-#define DA850_N_UI_PB		8
-
-static struct gpio_keys_button da850_evm_ui_keys[] = {
-	[0 ... DA850_N_UI_PB - 1] = {
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
-		.code			= -1, /* assigned at runtime */
-		.gpio			= -1, /* assigned at runtime */
-		.desc			= NULL, /* assigned at runtime */
-	},
-};
-
-static struct gpio_keys_platform_data da850_evm_ui_keys_pdata = {
-	.buttons = da850_evm_ui_keys,
-	.nbuttons = ARRAY_SIZE(da850_evm_ui_keys),
-	.poll_interval = DA850_GPIO_KEYS_POLL_MS,
-};
-
-static struct platform_device da850_evm_ui_keys_device = {
-	.name = "gpio-keys-polled",
-	.id = 0,
-	.dev = {
-		.platform_data = &da850_evm_ui_keys_pdata
-	},
-};
-
-static void da850_evm_ui_keys_init(unsigned gpio)
-{
-	int i;
-	struct gpio_keys_button *button;
-
-	for (i = 0; i < DA850_N_UI_PB; i++) {
-		button = &da850_evm_ui_keys[i];
-		button->code = KEY_F8 - i;
-		button->desc = da850_evm_ui_exp[DA850_EVM_UI_EXP_PB8 + i];
-		button->gpio = gpio + DA850_EVM_UI_EXP_PB8 + i;
-	}
-}
-
-#ifdef CONFIG_DA850_UI_SD_VIDEO_PORT
-static inline void da850_evm_setup_video_port(int video_sel)
-{
-	gpio_set_value_cansleep(video_sel, 0);
-}
-#else
-static inline void da850_evm_setup_video_port(int video_sel) { }
-#endif
-
-static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
-						unsigned ngpio, void *c)
-{
-	int sel_a, sel_b, sel_c, ret;
-
-	sel_a = gpio + DA850_EVM_UI_EXP_SEL_A;
-	sel_b = gpio + DA850_EVM_UI_EXP_SEL_B;
-	sel_c = gpio + DA850_EVM_UI_EXP_SEL_C;
-
-	ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]);
-	if (ret) {
-		pr_warn("Cannot open UI expander pin %d\n", sel_a);
-		goto exp_setup_sela_fail;
-	}
-
-	ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]);
-	if (ret) {
-		pr_warn("Cannot open UI expander pin %d\n", sel_b);
-		goto exp_setup_selb_fail;
-	}
-
-	ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]);
-	if (ret) {
-		pr_warn("Cannot open UI expander pin %d\n", sel_c);
-		goto exp_setup_selc_fail;
-	}
-
-	/* deselect all functionalities */
-	gpio_direction_output(sel_a, 1);
-	gpio_direction_output(sel_b, 1);
-	gpio_direction_output(sel_c, 1);
-
-	da850_evm_ui_keys_init(gpio);
-	ret = platform_device_register(&da850_evm_ui_keys_device);
-	if (ret) {
-		pr_warn("Could not register UI GPIO expander push-buttons");
-		goto exp_setup_keys_fail;
-	}
-
-	pr_info("DA850/OMAP-L138 EVM UI card detected\n");
-
-	da850_evm_setup_nor_nand();
-
-	da850_evm_setup_emac_rmii(sel_a);
-
-	da850_evm_setup_video_port(sel_c);
-
-	return 0;
-
-exp_setup_keys_fail:
-	gpio_free(sel_c);
-exp_setup_selc_fail:
-	gpio_free(sel_b);
-exp_setup_selb_fail:
-	gpio_free(sel_a);
-exp_setup_sela_fail:
-	return ret;
-}
-
-static int da850_evm_ui_expander_teardown(struct i2c_client *client,
-					unsigned gpio, unsigned ngpio, void *c)
-{
-	platform_device_unregister(&da850_evm_ui_keys_device);
-
-	/* deselect all functionalities */
-	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_C, 1);
-	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_B, 1);
-	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_A, 1);
-
-	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_C);
-	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_B);
-	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_A);
-
-	return 0;
-}
-
-/* assign the baseboard expander's GPIOs after the UI board's */
-#define DA850_UI_EXPANDER_N_GPIOS ARRAY_SIZE(da850_evm_ui_exp)
-#define DA850_BB_EXPANDER_GPIO_BASE (DAVINCI_N_GPIO + DA850_UI_EXPANDER_N_GPIOS)
-
-enum da850_evm_bb_exp_pins {
-	DA850_EVM_BB_EXP_DEEP_SLEEP_EN = 0,
-	DA850_EVM_BB_EXP_SW_RST,
-	DA850_EVM_BB_EXP_TP_23,
-	DA850_EVM_BB_EXP_TP_22,
-	DA850_EVM_BB_EXP_TP_21,
-	DA850_EVM_BB_EXP_USER_PB1,
-	DA850_EVM_BB_EXP_USER_LED2,
-	DA850_EVM_BB_EXP_USER_LED1,
-	DA850_EVM_BB_EXP_USER_SW1,
-	DA850_EVM_BB_EXP_USER_SW2,
-	DA850_EVM_BB_EXP_USER_SW3,
-	DA850_EVM_BB_EXP_USER_SW4,
-	DA850_EVM_BB_EXP_USER_SW5,
-	DA850_EVM_BB_EXP_USER_SW6,
-	DA850_EVM_BB_EXP_USER_SW7,
-	DA850_EVM_BB_EXP_USER_SW8
-};
-
-static const char * const da850_evm_bb_exp[] = {
-	[DA850_EVM_BB_EXP_DEEP_SLEEP_EN]	= "deep_sleep_en",
-	[DA850_EVM_BB_EXP_SW_RST]		= "sw_rst",
-	[DA850_EVM_BB_EXP_TP_23]		= "tp_23",
-	[DA850_EVM_BB_EXP_TP_22]		= "tp_22",
-	[DA850_EVM_BB_EXP_TP_21]		= "tp_21",
-	[DA850_EVM_BB_EXP_USER_PB1]		= "user_pb1",
-	[DA850_EVM_BB_EXP_USER_LED2]		= "user_led2",
-	[DA850_EVM_BB_EXP_USER_LED1]		= "user_led1",
-	[DA850_EVM_BB_EXP_USER_SW1]		= "user_sw1",
-	[DA850_EVM_BB_EXP_USER_SW2]		= "user_sw2",
-	[DA850_EVM_BB_EXP_USER_SW3]		= "user_sw3",
-	[DA850_EVM_BB_EXP_USER_SW4]		= "user_sw4",
-	[DA850_EVM_BB_EXP_USER_SW5]		= "user_sw5",
-	[DA850_EVM_BB_EXP_USER_SW6]		= "user_sw6",
-	[DA850_EVM_BB_EXP_USER_SW7]		= "user_sw7",
-	[DA850_EVM_BB_EXP_USER_SW8]		= "user_sw8",
-};
-
-#define DA850_N_BB_USER_SW	8
-
-static struct gpio_keys_button da850_evm_bb_keys[] = {
-	[0] = {
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
-		.code			= KEY_PROG1,
-		.desc			= NULL, /* assigned at runtime */
-		.gpio			= -1, /* assigned at runtime */
-	},
-	[1 ... DA850_N_BB_USER_SW] = {
-		.type			= EV_SW,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
-		.code			= -1, /* assigned at runtime */
-		.desc			= NULL, /* assigned at runtime */
-		.gpio			= -1, /* assigned at runtime */
-	},
-};
-
-static struct gpio_keys_platform_data da850_evm_bb_keys_pdata = {
-	.buttons = da850_evm_bb_keys,
-	.nbuttons = ARRAY_SIZE(da850_evm_bb_keys),
-	.poll_interval = DA850_GPIO_KEYS_POLL_MS,
-};
-
-static struct platform_device da850_evm_bb_keys_device = {
-	.name = "gpio-keys-polled",
-	.id = 1,
-	.dev = {
-		.platform_data = &da850_evm_bb_keys_pdata
-	},
-};
-
-static void da850_evm_bb_keys_init(unsigned gpio)
-{
-	int i;
-	struct gpio_keys_button *button;
-
-	button = &da850_evm_bb_keys[0];
-	button->desc = da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_PB1];
-	button->gpio = gpio + DA850_EVM_BB_EXP_USER_PB1;
-
-	for (i = 0; i < DA850_N_BB_USER_SW; i++) {
-		button = &da850_evm_bb_keys[i + 1];
-		button->code = SW_LID + i;
-		button->desc = da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_SW1 + i];
-		button->gpio = gpio + DA850_EVM_BB_EXP_USER_SW1 + i;
-	}
-}
-
-static struct gpio_led da850_evm_bb_leds[] = {
-	{
-		.name = "user_led2",
-	},
-	{
-		.name = "user_led1",
-	},
-};
-
-static struct gpio_led_platform_data da850_evm_bb_leds_pdata = {
-	.leds = da850_evm_bb_leds,
-	.num_leds = ARRAY_SIZE(da850_evm_bb_leds),
-};
-
-static struct gpiod_lookup_table da850_evm_bb_leds_gpio_table = {
-	.dev_id = "leds-gpio",
-	.table = {
-		GPIO_LOOKUP_IDX("i2c-bb-expander",
-				DA850_EVM_BB_EXP_USER_LED2, NULL,
-				0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("i2c-bb-expander",
-				DA850_EVM_BB_EXP_USER_LED2 + 1, NULL,
-				1, GPIO_ACTIVE_LOW),
-
-		{ },
-	},
-};
-
-static struct platform_device da850_evm_bb_leds_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev = {
-		.platform_data = &da850_evm_bb_leds_pdata
-	}
-};
-
-static int da850_evm_bb_expander_setup(struct i2c_client *client,
-						unsigned gpio, unsigned ngpio,
-						void *c)
-{
-	int ret;
-
-	/*
-	 * Register the switches and pushbutton on the baseboard as a gpio-keys
-	 * device.
-	 */
-	da850_evm_bb_keys_init(gpio);
-	ret = platform_device_register(&da850_evm_bb_keys_device);
-	if (ret) {
-		pr_warn("Could not register baseboard GPIO expander keys");
-		goto io_exp_setup_sw_fail;
-	}
-
-	gpiod_add_lookup_table(&da850_evm_bb_leds_gpio_table);
-	ret = platform_device_register(&da850_evm_bb_leds_device);
-	if (ret) {
-		pr_warn("Could not register baseboard GPIO expander LEDs");
-		goto io_exp_setup_leds_fail;
-	}
-
-	return 0;
-
-io_exp_setup_leds_fail:
-	platform_device_unregister(&da850_evm_bb_keys_device);
-io_exp_setup_sw_fail:
-	return ret;
-}
-
-static int da850_evm_bb_expander_teardown(struct i2c_client *client,
-					unsigned gpio, unsigned ngpio, void *c)
-{
-	platform_device_unregister(&da850_evm_bb_leds_device);
-	platform_device_unregister(&da850_evm_bb_keys_device);
-
-	return 0;
-}
-
-static struct pca953x_platform_data da850_evm_ui_expander_info = {
-	.gpio_base	= DAVINCI_N_GPIO,
-	.setup		= da850_evm_ui_expander_setup,
-	.teardown	= da850_evm_ui_expander_teardown,
-	.names		= da850_evm_ui_exp,
-};
-
-static struct pca953x_platform_data da850_evm_bb_expander_info = {
-	.gpio_base	= DA850_BB_EXPANDER_GPIO_BASE,
-	.setup		= da850_evm_bb_expander_setup,
-	.teardown	= da850_evm_bb_expander_teardown,
-	.names		= da850_evm_bb_exp,
-};
-
-static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	},
-	{
-		I2C_BOARD_INFO("tca6416", 0x20),
-		.dev_name = "ui-expander",
-		.platform_data = &da850_evm_ui_expander_info,
-	},
-	{
-		I2C_BOARD_INFO("tca6416", 0x21),
-		.dev_name = "bb-expander",
-		.platform_data = &da850_evm_bb_expander_info,
-	},
-};
-
-static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
-};
-
-/* davinci da850 evm audio machine driver */
-static u8 da850_iis_serializer_direction[] = {
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	TX_MODE,
-	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-};
-
-static struct snd_platform_data da850_evm_snd_data = {
-	.tx_dma_offset		= 0x2000,
-	.rx_dma_offset		= 0x2000,
-	.op_mode		= DAVINCI_MCASP_IIS_MODE,
-	.num_serializer		= ARRAY_SIZE(da850_iis_serializer_direction),
-	.tdm_slots		= 2,
-	.serial_dir		= da850_iis_serializer_direction,
-	.asp_chan_q		= EVENTQ_0,
-	.ram_chan_q		= EVENTQ_1,
-	.version		= MCASP_VERSION_2,
-	.txnumevt		= 1,
-	.rxnumevt		= 1,
-	.sram_size_playback	= SZ_8K,
-	.sram_size_capture	= SZ_8K,
-};
-
-static const short da850_evm_mcasp_pins[] __initconst = {
-	DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
-	DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE,
-	DA850_AXR_11, DA850_AXR_12,
-	-1
-};
-
-#define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
-#define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
-
-static struct gpiod_lookup_table mmc_gpios_table = {
-	.dev_id = "da830-mmc.0",
-	.table = {
-		/* gpio chip 2 contains gpio range 64-95 */
-		GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_CD_PIN, "cd",
-			    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp",
-			    GPIO_ACTIVE_HIGH),
-		{ }
-	},
-};
-
-static struct davinci_mmc_config da850_mmc_config = {
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static const short da850_evm_mmcsd0_pins[] __initconst = {
-	DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
-	DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
-	DA850_GPIO4_0, DA850_GPIO4_1,
-	-1
-};
-
-static struct property_entry da850_lcd_backlight_props[] = {
-	PROPERTY_ENTRY_BOOL("default-on"),
-	{ }
-};
-
-static struct gpiod_lookup_table da850_lcd_backlight_gpio_table = {
-	.dev_id		= "gpio-backlight",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_LCD_BL_PIN, NULL, 0),
-		{ }
-	},
-};
-
-static const struct platform_device_info da850_lcd_backlight_info = {
-	.name		= "gpio-backlight",
-	.id		= PLATFORM_DEVID_NONE,
-	.properties	= da850_lcd_backlight_props,
-};
-
-static struct regulator_consumer_supply da850_lcd_supplies[] = {
-	REGULATOR_SUPPLY("lcd", NULL),
-};
-
-static struct regulator_init_data da850_lcd_supply_data = {
-	.consumer_supplies	= da850_lcd_supplies,
-	.num_consumer_supplies	= ARRAY_SIZE(da850_lcd_supplies),
-	.constraints    = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config da850_lcd_supply = {
-	.supply_name		= "lcd",
-	.microvolts		= 33000000,
-	.init_data		= &da850_lcd_supply_data,
-};
-
-static struct platform_device da850_lcd_supply_device = {
-	.name			= "reg-fixed-voltage",
-	.id			= 1, /* Dummy fixed regulator is 0 */
-	.dev			= {
-		.platform_data = &da850_lcd_supply,
-	},
-};
-
-static struct gpiod_lookup_table da850_lcd_supply_gpio_table = {
-	.dev_id			= "reg-fixed-voltage.1",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_LCD_PWR_PIN, NULL, 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table *da850_lcd_gpio_lookups[] = {
-	&da850_lcd_backlight_gpio_table,
-	&da850_lcd_supply_gpio_table,
-};
-
-static int da850_lcd_hw_init(void)
-{
-	struct platform_device *backlight;
-	int status;
-
-	gpiod_add_lookup_tables(da850_lcd_gpio_lookups,
-				ARRAY_SIZE(da850_lcd_gpio_lookups));
-
-	backlight = platform_device_register_full(&da850_lcd_backlight_info);
-	if (IS_ERR(backlight))
-		return PTR_ERR(backlight);
-
-	status = platform_device_register(&da850_lcd_supply_device);
-	if (status)
-		return status;
-
-	return 0;
-}
-
-/* Fixed regulator support */
-static struct regulator_consumer_supply fixed_supplies[] = {
-	/* Baseboard 3.3V: 5V -> TPS73701DCQ -> 3.3V */
-	REGULATOR_SUPPLY("AVDD", "1-0018"),
-	REGULATOR_SUPPLY("DRVDD", "1-0018"),
-
-	/* Baseboard 1.8V: 5V -> TPS73701DCQ -> 1.8V */
-	REGULATOR_SUPPLY("DVDD", "1-0018"),
-
-	/* UI card 3.3V: 5V -> TPS73701DCQ -> 3.3V */
-	REGULATOR_SUPPLY("vcc", "1-0020"),
-};
-
-/* TPS65070 voltage regulator support */
-
-/* 3.3V */
-static struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
-	{
-		.supply = "usb0_vdda33",
-	},
-	{
-		.supply = "usb1_vdda33",
-	},
-};
-
-/* 3.3V or 1.8V */
-static struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
-	{
-		.supply = "dvdd3318_a",
-	},
-	{
-		.supply = "dvdd3318_b",
-	},
-	{
-		.supply = "dvdd3318_c",
-	},
-	REGULATOR_SUPPLY("IOVDD", "1-0018"),
-};
-
-/* 1.2V */
-static struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
-	{
-		.supply = "cvdd",
-	},
-};
-
-/* 1.8V LDO */
-static struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
-	{
-		.supply = "sata_vddr",
-	},
-	{
-		.supply = "usb0_vdda18",
-	},
-	{
-		.supply = "usb1_vdda18",
-	},
-	{
-		.supply = "ddr_dvdd18",
-	},
-};
-
-/* 1.2V LDO */
-static struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
-	{
-		.supply = "sata_vdd",
-	},
-	{
-		.supply = "pll0_vdda",
-	},
-	{
-		.supply = "pll1_vdda",
-	},
-	{
-		.supply = "usbs_cvdd",
-	},
-	{
-		.supply = "vddarnwa1",
-	},
-};
-
-/* We take advantage of the fact that both defdcdc{2,3} are tied high */
-static struct tps6507x_reg_platform_data tps6507x_platform_data = {
-	.defdcdc_default = true,
-};
-
-static struct regulator_init_data tps65070_regulator_data[] = {
-	/* dcdc1 */
-	{
-		.constraints = {
-			.min_uV = 3150000,
-			.max_uV = 3450000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
-		.consumer_supplies = tps65070_dcdc1_consumers,
-	},
-
-	/* dcdc2 */
-	{
-		.constraints = {
-			.min_uV = 1710000,
-			.max_uV = 3450000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-			.always_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
-		.consumer_supplies = tps65070_dcdc2_consumers,
-		.driver_data = &tps6507x_platform_data,
-	},
-
-	/* dcdc3 */
-	{
-		.constraints = {
-			.min_uV = 950000,
-			.max_uV = 1350000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
-		.consumer_supplies = tps65070_dcdc3_consumers,
-		.driver_data = &tps6507x_platform_data,
-	},
-
-	/* ldo1 */
-	{
-		.constraints = {
-			.min_uV = 1710000,
-			.max_uV = 1890000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
-		.consumer_supplies = tps65070_ldo1_consumers,
-	},
-
-	/* ldo2 */
-	{
-		.constraints = {
-			.min_uV = 1140000,
-			.max_uV = 1320000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
-		.consumer_supplies = tps65070_ldo2_consumers,
-	},
-};
-
-static struct touchscreen_init_data tps6507x_touchscreen_data = {
-	.poll_period =  30,	/* ms between touch samples */
-	.min_pressure = 0x30,	/* minimum pressure to trigger touch */
-	.vendor = 0,		/* /sys/class/input/input?/id/vendor */
-	.product = 65070,	/* /sys/class/input/input?/id/product */
-	.version = 0x100,	/* /sys/class/input/input?/id/version */
-};
-
-static struct tps6507x_board tps_board = {
-	.tps6507x_pmic_init_data = &tps65070_regulator_data[0],
-	.tps6507x_ts_init_data = &tps6507x_touchscreen_data,
-};
-
-static struct i2c_board_info __initdata da850_evm_tps65070_info[] = {
-	{
-		I2C_BOARD_INFO("tps6507x", 0x48),
-		.platform_data = &tps_board,
-	},
-};
-
-static int __init pmic_tps65070_init(void)
-{
-	return i2c_register_board_info(1, da850_evm_tps65070_info,
-					ARRAY_SIZE(da850_evm_tps65070_info));
-}
-
-static const short da850_evm_lcdc_pins[] = {
-	DA850_GPIO2_8, DA850_GPIO2_15,
-	-1
-};
-
-static const short da850_evm_mii_pins[] = {
-	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
-	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
-	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static const short da850_evm_rmii_pins[] = {
-	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
-	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
-	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static struct gpiod_hog da850_evm_emac_gpio_hogs[] = {
-	{
-		.chip_label	= "davinci_gpio",
-		.chip_hwnum	= DA850_MII_MDIO_CLKEN_PIN,
-		.line_name	= "mdio_clk_en",
-		.lflags		= 0,
-		/* dflags set in da850_evm_config_emac() */
-	},
-	{ }
-};
-
-static int __init da850_evm_config_emac(void)
-{
-	void __iomem *cfg_chip3_base;
-	int ret;
-	u32 val;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	u8 rmii_en = soc_info->emac_pdata->rmii_en;
-
-	if (!machine_is_davinci_da850_evm())
-		return 0;
-
-	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
-
-	val = __raw_readl(cfg_chip3_base);
-
-	if (rmii_en) {
-		val |= BIT(8);
-		ret = davinci_cfg_reg_list(da850_evm_rmii_pins);
-		pr_info("EMAC: RMII PHY configured, MII PHY will not be"
-							" functional\n");
-	} else {
-		val &= ~BIT(8);
-		ret = davinci_cfg_reg_list(da850_evm_mii_pins);
-		pr_info("EMAC: MII PHY configured, RMII PHY will not be"
-							" functional\n");
-	}
-
-	if (ret)
-		pr_warn("%s: CPGMAC/RMII mux setup failed: %d\n",
-			__func__, ret);
-
-	/* configure the CFGCHIP3 register for RMII or MII */
-	__raw_writel(val, cfg_chip3_base);
-
-	ret = davinci_cfg_reg(DA850_GPIO2_6);
-	if (ret)
-		pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__);
-
-	da850_evm_emac_gpio_hogs[0].dflags = rmii_en ? GPIOD_OUT_HIGH
-						     : GPIOD_OUT_LOW;
-	gpiod_add_hogs(da850_evm_emac_gpio_hogs);
-
-	soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID;
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
-
-	return 0;
-}
-device_initcall(da850_evm_config_emac);
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM, hence
- * they are being reserved for codecs on the DSP side.
- */
-static const s16 da850_dma0_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma0_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30, 50},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30, 90},
-	{-1, -1}
-};
-
-static struct edma_rsv_info da850_edma_cc0_rsv = {
-	.rsv_chans	= da850_dma0_rsv_chans,
-	.rsv_slots	= da850_dma0_rsv_slots,
-};
-
-static struct edma_rsv_info da850_edma_cc1_rsv = {
-	.rsv_chans	= da850_dma1_rsv_chans,
-	.rsv_slots	= da850_dma1_rsv_slots,
-};
-
-static struct edma_rsv_info *da850_edma_rsv[2] = {
-	&da850_edma_cc0_rsv,
-	&da850_edma_cc1_rsv,
-};
-
-#ifdef CONFIG_CPU_FREQ
-static __init int da850_evm_init_cpufreq(void)
-{
-	switch (system_rev & 0xF) {
-	case 3:
-		da850_max_speed = 456000;
-		break;
-	case 2:
-		da850_max_speed = 408000;
-		break;
-	case 1:
-		da850_max_speed = 372000;
-		break;
-	}
-
-	return da850_register_cpufreq("pll0_sysclk3");
-}
-#else
-static __init int da850_evm_init_cpufreq(void) { return 0; }
-#endif
-
-#if defined(CONFIG_DA850_UI_SD_VIDEO_PORT)
-
-#define TVP5147_CH0		"tvp514x-0"
-#define TVP5147_CH1		"tvp514x-1"
-
-/* VPIF capture configuration */
-static struct tvp514x_platform_data tvp5146_pdata = {
-		.clk_polarity = 0,
-		.hs_polarity  = 1,
-		.vs_polarity  = 1,
-};
-
-#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
-
-static struct vpif_input da850_ch0_inputs[] = {
-	{
-		.input = {
-			.index = 0,
-			.name  = "Composite",
-			.type  = V4L2_INPUT_TYPE_CAMERA,
-			.capabilities = V4L2_IN_CAP_STD,
-			.std   = TVP514X_STD_ALL,
-		},
-		.input_route = INPUT_CVBS_VI2B,
-		.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-		.subdev_name = TVP5147_CH0,
-	},
-};
-
-static struct vpif_input da850_ch1_inputs[] = {
-	{
-		.input = {
-			.index = 0,
-			.name  = "S-Video",
-			.type  = V4L2_INPUT_TYPE_CAMERA,
-			.capabilities = V4L2_IN_CAP_STD,
-			.std   = TVP514X_STD_ALL,
-		},
-		.input_route = INPUT_SVIDEO_VI2C_VI1C,
-		.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-		.subdev_name = TVP5147_CH1,
-	},
-};
-
-static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = {
-	{
-		.name = TVP5147_CH0,
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-	{
-		.name = TVP5147_CH1,
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5c),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-};
-
-static struct vpif_capture_config da850_vpif_capture_config = {
-	.subdev_info = da850_vpif_capture_sdev_info,
-	.subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info),
-	.i2c_adapter_id = 1,
-	.chan_config[0] = {
-		.inputs = da850_ch0_inputs,
-		.input_count = ARRAY_SIZE(da850_ch0_inputs),
-		.vpif_if = {
-			.if_type = VPIF_IF_BT656,
-			.hd_pol  = 1,
-			.vd_pol  = 1,
-			.fid_pol = 0,
-		},
-	},
-	.chan_config[1] = {
-		.inputs = da850_ch1_inputs,
-		.input_count = ARRAY_SIZE(da850_ch1_inputs),
-		.vpif_if = {
-			.if_type = VPIF_IF_BT656,
-			.hd_pol  = 1,
-			.vd_pol  = 1,
-			.fid_pol = 0,
-		},
-	},
-	.card_name = "DA850/OMAP-L138 Video Capture",
-};
-
-/* VPIF display configuration */
-
-static struct adv7343_platform_data adv7343_pdata = {
-	.mode_config = {
-		.dac = { 1, 1, 1 },
-	},
-	.sd_config = {
-		.sd_dac_out = { 1 },
-	},
-};
-
-static struct vpif_subdev_info da850_vpif_subdev[] = {
-	{
-		.name = "adv7343",
-		.board_info = {
-			I2C_BOARD_INFO("adv7343", 0x2a),
-			.platform_data = &adv7343_pdata,
-		},
-	},
-};
-
-static const struct vpif_output da850_ch0_outputs[] = {
-	{
-		.output = {
-			.index = 0,
-			.name = "Composite",
-			.type = V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities = V4L2_OUT_CAP_STD,
-			.std = V4L2_STD_ALL,
-		},
-		.subdev_name = "adv7343",
-		.output_route = ADV7343_COMPOSITE_ID,
-	},
-	{
-		.output = {
-			.index = 1,
-			.name = "S-Video",
-			.type = V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities = V4L2_OUT_CAP_STD,
-			.std = V4L2_STD_ALL,
-		},
-		.subdev_name = "adv7343",
-		.output_route = ADV7343_SVIDEO_ID,
-	},
-};
-
-static struct vpif_display_config da850_vpif_display_config = {
-	.subdevinfo   = da850_vpif_subdev,
-	.subdev_count = ARRAY_SIZE(da850_vpif_subdev),
-	.chan_config[0] = {
-		.outputs = da850_ch0_outputs,
-		.output_count = ARRAY_SIZE(da850_ch0_outputs),
-	},
-	.card_name    = "DA850/OMAP-L138 Video Display",
-	.i2c_adapter_id = 1,
-};
-
-static __init void da850_vpif_init(void)
-{
-	int ret;
-
-	ret = da850_register_vpif();
-	if (ret)
-		pr_warn("da850_evm_init: VPIF setup failed: %d\n", ret);
-
-	ret = davinci_cfg_reg_list(da850_vpif_capture_pins);
-	if (ret)
-		pr_warn("da850_evm_init: VPIF capture mux setup failed: %d\n",
-			ret);
-
-	ret = da850_register_vpif_capture(&da850_vpif_capture_config);
-	if (ret)
-		pr_warn("da850_evm_init: VPIF capture setup failed: %d\n", ret);
-
-	ret = davinci_cfg_reg_list(da850_vpif_display_pins);
-	if (ret)
-		pr_warn("da850_evm_init: VPIF display mux setup failed: %d\n",
-			ret);
-
-	ret = da850_register_vpif_display(&da850_vpif_display_config);
-	if (ret)
-		pr_warn("da850_evm_init: VPIF display setup failed: %d\n", ret);
-}
-
-#else
-static __init void da850_vpif_init(void) {}
-#endif
-
-#define DA850EVM_SATA_REFCLKPN_RATE	(100 * 1000 * 1000)
-
-static __init void da850_evm_init(void)
-{
-	int ret;
-
-	da850_register_clocks();
-
-	ret = da850_register_gpio();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	regulator_register_fixed(0, fixed_supplies, ARRAY_SIZE(fixed_supplies));
-
-	ret = pmic_tps65070_init();
-	if (ret)
-		pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
-
-	ret = da850_register_edma(da850_edma_rsv);
-	if (ret)
-		pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
-
-	ret = davinci_cfg_reg_list(da850_i2c0_pins);
-	if (ret)
-		pr_warn("%s: I2C0 mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
-	if (ret)
-		pr_warn("%s: I2C0 registration failed: %d\n", __func__, ret);
-
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warn("%s: watchdog registration failed: %d\n",
-			__func__, ret);
-
-	if (HAS_MMC) {
-		ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins);
-		if (ret)
-			pr_warn("%s: MMCSD0 mux setup failed: %d\n",
-				__func__, ret);
-
-		gpiod_add_lookup_table(&mmc_gpios_table);
-
-		ret = da8xx_register_mmcsd0(&da850_mmc_config);
-		if (ret)
-			pr_warn("%s: MMCSD0 registration failed: %d\n",
-				__func__, ret);
-	}
-
-	davinci_serial_init(da8xx_serial_device);
-
-	nvmem_add_cell_table(&da850evm_nvmem_cell_table);
-	nvmem_add_cell_lookups(&da850evm_nvmem_cell_lookup, 1);
-
-	i2c_register_board_info(1, da850_evm_i2c_devices,
-			ARRAY_SIZE(da850_evm_i2c_devices));
-
-	/*
-	 * shut down uart 0 and 1; they are not used on the board and
-	 * accessing them causes endless "too much work in irq53" messages
-	 * with arago fs
-	 */
-	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
-	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
-
-	ret = davinci_cfg_reg_list(da850_evm_mcasp_pins);
-	if (ret)
-		pr_warn("%s: McASP mux setup failed: %d\n", __func__, ret);
-
-	da850_evm_snd_data.sram_pool = sram_get_gen_pool();
-	da8xx_register_mcasp(0, &da850_evm_snd_data);
-
-	ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
-	if (ret)
-		pr_warn("%s: LCDC mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_uio_pruss();
-	if (ret)
-		pr_warn("da850_evm_init: pruss initialization failed: %d\n",
-				ret);
-
-	/* Handle board specific muxing for LCD here */
-	ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
-	if (ret)
-		pr_warn("%s: EVM specific LCD mux setup failed: %d\n",
-			__func__, ret);
-
-	ret = da850_lcd_hw_init();
-	if (ret)
-		pr_warn("%s: LCD initialization failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
-	if (ret)
-		pr_warn("%s: LCDC registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_rtc();
-	if (ret)
-		pr_warn("%s: RTC setup failed: %d\n", __func__, ret);
-
-	ret = da850_evm_init_cpufreq();
-	if (ret)
-		pr_warn("%s: cpufreq registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_cpuidle();
-	if (ret)
-		pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret);
-
-	davinci_pm_init();
-	da850_vpif_init();
-
-	ret = spi_register_board_info(da850evm_spi_info,
-				      ARRAY_SIZE(da850evm_spi_info));
-	if (ret)
-		pr_warn("%s: spi info registration failed: %d\n", __func__,
-			ret);
-
-	ret = da8xx_register_spi_bus(1, ARRAY_SIZE(da850evm_spi_info));
-	if (ret)
-		pr_warn("%s: SPI 1 registration failed: %d\n", __func__, ret);
-
-	ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
-	if (ret)
-		pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_rproc();
-	if (ret)
-		pr_warn("%s: dsp/rproc registration failed: %d\n",
-			__func__, ret);
-
-	regulator_has_full_constraints();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init da850_evm_console_init(void)
-{
-	if (!machine_is_davinci_da850_evm())
-		return 0;
-
-	return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(da850_evm_console_init);
-#endif
-
-static void __init da850_evm_map_io(void)
-{
-	da850_init();
-}
-
-MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
-	.atag_offset	= 0x100,
-	.map_io		= da850_evm_map_io,
-	.init_irq	= da850_init_irq,
-	.init_time	= da850_init_time,
-	.init_machine	= da850_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-	.reserve	= da8xx_rproc_reserve_cma,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
deleted file mode 100644
index 3c5a9e3c128a..000000000000
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ /dev/null
@@ -1,447 +0,0 @@
-/*
- * TI DaVinci EVM board support
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/clk.h>
-#include <linux/dm9000.h>
-#include <linux/videodev2.h>
-#include <media/i2c/tvp514x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/serial.h>
-#include <mach/common.h>
-
-#include "davinci.h"
-
-/* NOTE:  this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
- * swap chips, maybe with a different block size, partitioning may
- * need to be changed.
- */
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem1",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.core_chipsel		= 0,
-	.mask_chipsel		= BIT(14),
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.bbt_options		= NAND_BBT_USE_FLASH,
-	.ecc_bits		= 4,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM355_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM355_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_nand_device = {
-	.name			= "davinci_nand",
-	.id			= 0,
-
-	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
-	.resource		= davinci_nand_resources,
-
-	.dev			= {
-		.platform_data	= &davinci_nand_data,
-	},
-};
-
-#define DM355_I2C_SDA_PIN	GPIO_TO_PIN(0, 15)
-#define DM355_I2C_SCL_PIN	GPIO_TO_PIN(0, 14)
-
-static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
-	.dev_id = "i2c_davinci.1",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DM355_I2C_SDA_PIN, "sda",
-			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl",
-			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		{ }
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 400	/* kHz */,
-	.bus_delay	= 0	/* usec */,
-	.gpio_recovery	= true,
-};
-
-static int dm355evm_mmc_gpios = -EINVAL;
-
-static void dm355evm_mmcsd_gpios(unsigned gpio)
-{
-	gpio_request(gpio + 0, "mmc0_ro");
-	gpio_request(gpio + 1, "mmc0_cd");
-	gpio_request(gpio + 2, "mmc1_ro");
-	gpio_request(gpio + 3, "mmc1_cd");
-
-	/* we "know" these are input-only so we don't
-	 * need to call gpio_direction_input()
-	 */
-
-	dm355evm_mmc_gpios = gpio;
-}
-
-static struct i2c_board_info dm355evm_i2c_info[] = {
-	{	I2C_BOARD_INFO("dm355evm_msp", 0x25),
-		.platform_data = dm355evm_mmcsd_gpios,
-	},
-	/* { plus irq  }, */
-	{ I2C_BOARD_INFO("tlv320aic33", 0x1b), },
-};
-
-static void __init evm_init_i2c(void)
-{
-	gpiod_add_lookup_table(&i2c_recovery_gpiod_table);
-	davinci_init_i2c(&i2c_pdata);
-
-	gpio_request(5, "dm355evm_msp");
-	gpio_direction_input(5);
-	dm355evm_i2c_info[0].irq = gpio_to_irq(5);
-
-	i2c_register_board_info(1, dm355evm_i2c_info,
-			ARRAY_SIZE(dm355evm_i2c_info));
-}
-
-static struct resource dm355evm_dm9000_rsrc[] = {
-	{
-		/* addr */
-		.start	= 0x04014000,
-		.end	= 0x04014001,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		/* data */
-		.start	= 0x04014002,
-		.end	= 0x04014003,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_IRQ
-			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
-	},
-};
-
-static struct dm9000_plat_data dm335evm_dm9000_platdata;
-
-static struct platform_device dm355evm_dm9000 = {
-	.name		= "dm9000",
-	.id		= -1,
-	.resource	= dm355evm_dm9000_rsrc,
-	.num_resources	= ARRAY_SIZE(dm355evm_dm9000_rsrc),
-	.dev		= {
-		.platform_data = &dm335evm_dm9000_platdata,
-	},
-};
-
-static struct tvp514x_platform_data tvp5146_pdata = {
-	.clk_polarity = 0,
-	.hs_polarity = 1,
-	.vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-/* Inputs available at the TVP5146 */
-static struct v4l2_input tvp5146_inputs[] = {
-	{
-		.index = 0,
-		.name = "Composite",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-	{
-		.index = 1,
-		.name = "S-Video",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-};
-
-/*
- * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
- * with tvp5146_inputs
- */
-static struct vpfe_route tvp5146_routes[] = {
-	{
-		.input = INPUT_CVBS_VI2B,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-	{
-		.input = INPUT_SVIDEO_VI2C_VI1C,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpfe_subdev_info vpfe_sub_devs[] = {
-	{
-		.name = "tvp5146",
-		.grp_id = 0,
-		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
-		.inputs = tvp5146_inputs,
-		.routes = tvp5146_routes,
-		.can_route = 1,
-		.ccdc_if_params = {
-			.if_type = VPFE_BT656,
-			.hdpol = VPFE_PINPOL_POSITIVE,
-			.vdpol = VPFE_PINPOL_POSITIVE,
-		},
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-	}
-};
-
-static struct vpfe_config vpfe_cfg = {
-	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
-	.i2c_adapter_id = 1,
-	.sub_devs = vpfe_sub_devs,
-	.card_name = "DM355 EVM",
-	.ccdc = "DM355 CCDC",
-};
-
-/* venc standards timings */
-static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = {
-	{
-		.name		= "ntsc",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_NTSC,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {11, 10},
-		.fps		= {30000, 1001},
-		.left_margin	= 0x79,
-		.upper_margin	= 0x10,
-	},
-	{
-		.name		= "pal",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_PAL,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {54, 59},
-		.fps		= {25, 1},
-		.left_margin	= 0x7E,
-		.upper_margin	= 0x16
-	},
-};
-
-#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-
-/*
- * The outputs available from VPBE + ecnoders. Keep the
- * the order same as that of encoders. First those from venc followed by that
- * from encoders. Index in the output refers to index on a particular encoder.
- * Driver uses this index to pass it to encoder when it supports more than
- * one output. Application uses index of the array to set an output.
- */
-static struct vpbe_output dm355evm_vpbe_outputs[] = {
-	{
-		.output		= {
-			.index		= 0,
-			.name		= "Composite",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.std		= VENC_STD_ALL,
-			.capabilities	= V4L2_OUT_CAP_STD,
-		},
-		.subdev_name	= DM355_VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "ntsc",
-		.num_modes	= ARRAY_SIZE(dm355evm_enc_preset_timing),
-		.modes		= dm355evm_enc_preset_timing,
-		.if_params	= MEDIA_BUS_FMT_FIXED,
-	},
-};
-
-static struct vpbe_config dm355evm_display_cfg = {
-	.module_name	= "dm355-vpbe-display",
-	.i2c_adapter_id	= 1,
-	.osd		= {
-		.module_name	= DM355_VPBE_OSD_SUBDEV_NAME,
-	},
-	.venc		= {
-		.module_name	= DM355_VPBE_VENC_SUBDEV_NAME,
-	},
-	.num_outputs	= ARRAY_SIZE(dm355evm_vpbe_outputs),
-	.outputs	= dm355evm_vpbe_outputs,
-};
-
-static struct platform_device *davinci_evm_devices[] __initdata = {
-	&dm355evm_dm9000,
-	&davinci_nand_device,
-};
-
-static void __init dm355_evm_map_io(void)
-{
-	dm355_init();
-}
-
-static int dm355evm_mmc_get_cd(int module)
-{
-	if (!gpio_is_valid(dm355evm_mmc_gpios))
-		return -ENXIO;
-	/* low == card present */
-	return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1);
-}
-
-static int dm355evm_mmc_get_ro(int module)
-{
-	if (!gpio_is_valid(dm355evm_mmc_gpios))
-		return -ENXIO;
-	/* high == card's write protect switch active */
-	return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0);
-}
-
-static struct davinci_mmc_config dm355evm_mmc_config = {
-	.get_cd		= dm355evm_mmc_get_cd,
-	.get_ro		= dm355evm_mmc_get_ro,
-	.wires		= 4,
-	.max_freq       = 50000000,
-	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-/* Don't connect anything to J10 unless you're only using USB host
- * mode *and* have to do so with some kind of gender-bender.  If
- * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
- * the ID pin won't need any help.
- */
-#define USB_ID_VALUE	1	/* ID pulled low */
-
-static struct spi_eeprom at25640a = {
-	.byte_len	= SZ_64K / 8,
-	.name		= "at25640a",
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static const struct spi_board_info dm355_evm_spi_info[] __initconst = {
-	{
-		.modalias	= "at25",
-		.platform_data	= &at25640a,
-		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static __init void dm355_evm_init(void)
-{
-	struct clk *aemif;
-	int ret;
-
-	dm355_register_clocks();
-
-	ret = dm355_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	gpio_request(1, "dm9000");
-	gpio_direction_input(1);
-	dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
-
-	aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
-	if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
-		clk_prepare_enable(aemif);
-
-	platform_add_devices(davinci_evm_devices,
-			     ARRAY_SIZE(davinci_evm_devices));
-	evm_init_i2c();
-	davinci_serial_init(dm355_serial_device);
-
-	/* NOTE:  NAND flash timings set by the UBL are slower than
-	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
-	 * but could be 0x0400008c for about 25% faster page reads.
-	 */
-
-	gpio_request(2, "usb_id_toggle");
-	gpio_direction_output(2, USB_ID_VALUE);
-	/* irlml6401 switches over 1A in under 8 msec */
-	davinci_setup_usb(1000, 8);
-
-	davinci_setup_mmc(0, &dm355evm_mmc_config);
-	davinci_setup_mmc(1, &dm355evm_mmc_config);
-
-	dm355_init_video(&vpfe_cfg, &dm355evm_display_cfg);
-
-	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
-			ARRAY_SIZE(dm355_evm_spi_info));
-
-	/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
-	dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN);
-}
-
-MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
-	.atag_offset  = 0x100,
-	.map_io	      = dm355_evm_map_io,
-	.init_irq     = dm355_init_irq,
-	.init_time	= dm355_init_time,
-	.init_machine = dm355_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
deleted file mode 100644
index e475b2113e70..000000000000
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ /dev/null
@@ -1,282 +0,0 @@
-/*
- * DM355 leopard board support
- *
- * Based on board-dm355-evm.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/serial.h>
-
-#include "davinci.h"
-
-/* NOTE:  this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
- * swap chips, maybe with a different block size, partitioning may
- * need to be changed.
- */
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem1",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.core_chipsel		= 0,
-	.mask_chipsel		= BIT(14),
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_placement		= NAND_ECC_PLACEMENT_INTERLEAVED,
-	.ecc_bits		= 4,
-	.bbt_options		= NAND_BBT_USE_FLASH,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM355_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM355_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_nand_device = {
-	.name			= "davinci_nand",
-	.id			= 0,
-
-	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
-	.resource		= davinci_nand_resources,
-
-	.dev			= {
-		.platform_data	= &davinci_nand_data,
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 400	/* kHz */,
-	.bus_delay	= 0	/* usec */,
-};
-
-static int leopard_mmc_gpio = -EINVAL;
-
-static void dm355leopard_mmcsd_gpios(unsigned gpio)
-{
-	gpio_request(gpio + 0, "mmc0_ro");
-	gpio_request(gpio + 1, "mmc0_cd");
-	gpio_request(gpio + 2, "mmc1_ro");
-	gpio_request(gpio + 3, "mmc1_cd");
-
-	/* we "know" these are input-only so we don't
-	 * need to call gpio_direction_input()
-	 */
-
-	leopard_mmc_gpio = gpio;
-}
-
-static struct i2c_board_info dm355leopard_i2c_info[] = {
-	{ I2C_BOARD_INFO("dm355leopard_msp", 0x25),
-		.platform_data = dm355leopard_mmcsd_gpios,
-		/* plus irq */ },
-	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
-	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
-};
-
-static void __init leopard_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-
-	gpio_request(5, "dm355leopard_msp");
-	gpio_direction_input(5);
-	dm355leopard_i2c_info[0].irq = gpio_to_irq(5);
-
-	i2c_register_board_info(1, dm355leopard_i2c_info,
-			ARRAY_SIZE(dm355leopard_i2c_info));
-}
-
-static struct resource dm355leopard_dm9000_rsrc[] = {
-	{
-		/* addr */
-		.start	= 0x04000000,
-		.end	= 0x04000001,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		/* data */
-		.start	= 0x04000016,
-		.end	= 0x04000017,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_IRQ
-			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
-	},
-};
-
-static struct platform_device dm355leopard_dm9000 = {
-	.name		= "dm9000",
-	.id		= -1,
-	.resource	= dm355leopard_dm9000_rsrc,
-	.num_resources	= ARRAY_SIZE(dm355leopard_dm9000_rsrc),
-};
-
-static struct platform_device *davinci_leopard_devices[] __initdata = {
-	&dm355leopard_dm9000,
-	&davinci_nand_device,
-};
-
-static void __init dm355_leopard_map_io(void)
-{
-	dm355_init();
-}
-
-static int dm355leopard_mmc_get_cd(int module)
-{
-	if (!gpio_is_valid(leopard_mmc_gpio))
-		return -ENXIO;
-	/* low == card present */
-	return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1);
-}
-
-static int dm355leopard_mmc_get_ro(int module)
-{
-	if (!gpio_is_valid(leopard_mmc_gpio))
-		return -ENXIO;
-	/* high == card's write protect switch active */
-	return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0);
-}
-
-static struct davinci_mmc_config dm355leopard_mmc_config = {
-	.get_cd		= dm355leopard_mmc_get_cd,
-	.get_ro		= dm355leopard_mmc_get_ro,
-	.wires		= 4,
-	.max_freq       = 50000000,
-	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-/* Don't connect anything to J10 unless you're only using USB host
- * mode *and* have to do so with some kind of gender-bender.  If
- * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
- * the ID pin won't need any help.
- */
-#define USB_ID_VALUE	1	/* ID pulled low */
-
-static struct spi_eeprom at25640a = {
-	.byte_len	= SZ_64K / 8,
-	.name		= "at25640a",
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static const struct spi_board_info dm355_leopard_spi_info[] __initconst = {
-	{
-		.modalias	= "at25",
-		.platform_data	= &at25640a,
-		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static __init void dm355_leopard_init(void)
-{
-	struct clk *aemif;
-	int ret;
-
-	dm355_register_clocks();
-
-	ret = dm355_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	gpio_request(9, "dm9000");
-	gpio_direction_input(9);
-	dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
-
-	aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
-	if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
-		clk_prepare_enable(aemif);
-
-	platform_add_devices(davinci_leopard_devices,
-			     ARRAY_SIZE(davinci_leopard_devices));
-	leopard_init_i2c();
-	davinci_serial_init(dm355_serial_device);
-
-	/* NOTE:  NAND flash timings set by the UBL are slower than
-	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
-	 * but could be 0x0400008c for about 25% faster page reads.
-	 */
-
-	gpio_request(2, "usb_id_toggle");
-	gpio_direction_output(2, USB_ID_VALUE);
-	/* irlml6401 switches over 1A in under 8 msec */
-	davinci_setup_usb(1000, 8);
-
-	davinci_setup_mmc(0, &dm355leopard_mmc_config);
-	davinci_setup_mmc(1, &dm355leopard_mmc_config);
-
-	dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
-			ARRAY_SIZE(dm355_leopard_spi_info));
-}
-
-MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
-	.atag_offset  = 0x100,
-	.map_io	      = dm355_leopard_map_io,
-	.init_irq     = dm355_init_irq,
-	.init_time	= dm355_init_time,
-	.init_machine = dm355_leopard_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
deleted file mode 100644
index bdf31eb77620..000000000000
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ /dev/null
@@ -1,860 +0,0 @@
-/*
- * TI DaVinci DM365 EVM board support
- *
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/property.h>
-#include <linux/leds.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/slab.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/nvmem-provider.h>
-#include <linux/input.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/v4l2-dv-timings.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/mux.h>
-#include <mach/common.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <mach/serial.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/keyscan-davinci.h>
-
-#include <media/i2c/ths7303.h>
-#include <media/i2c/tvp514x.h>
-
-#include "davinci.h"
-
-static inline int have_imager(void)
-{
-	/* REVISIT when it's supported, trigger via Kconfig */
-	return 0;
-}
-
-static inline int have_tvp7002(void)
-{
-	/* REVISIT when it's supported, trigger via Kconfig */
-	return 0;
-}
-
-#define DM365_EVM_PHY_ID		"davinci_mdio-0:01"
-/*
- * A MAX-II CPLD is used for various board control functions.
- */
-#define CPLD_OFFSET(a13a8,a2a1)		(((a13a8) << 10) + ((a2a1) << 3))
-
-#define CPLD_VERSION	CPLD_OFFSET(0,0)	/* r/o */
-#define CPLD_TEST	CPLD_OFFSET(0,1)
-#define CPLD_LEDS	CPLD_OFFSET(0,2)
-#define CPLD_MUX	CPLD_OFFSET(0,3)
-#define CPLD_SWITCH	CPLD_OFFSET(1,0)	/* r/o */
-#define CPLD_POWER	CPLD_OFFSET(1,1)
-#define CPLD_VIDEO	CPLD_OFFSET(1,2)
-#define CPLD_CARDSTAT	CPLD_OFFSET(1,3)	/* r/o */
-
-#define CPLD_DILC_OUT	CPLD_OFFSET(2,0)
-#define CPLD_DILC_IN	CPLD_OFFSET(2,1)	/* r/o */
-
-#define CPLD_IMG_DIR0	CPLD_OFFSET(2,2)
-#define CPLD_IMG_MUX0	CPLD_OFFSET(2,3)
-#define CPLD_IMG_MUX1	CPLD_OFFSET(3,0)
-#define CPLD_IMG_DIR1	CPLD_OFFSET(3,1)
-#define CPLD_IMG_MUX2	CPLD_OFFSET(3,2)
-#define CPLD_IMG_MUX3	CPLD_OFFSET(3,3)
-#define CPLD_IMG_DIR2	CPLD_OFFSET(4,0)
-#define CPLD_IMG_MUX4	CPLD_OFFSET(4,1)
-#define CPLD_IMG_MUX5	CPLD_OFFSET(4,2)
-
-#define CPLD_RESETS	CPLD_OFFSET(4,3)
-
-#define CPLD_CCD_DIR1	CPLD_OFFSET(0x3e,0)
-#define CPLD_CCD_IO1	CPLD_OFFSET(0x3e,1)
-#define CPLD_CCD_DIR2	CPLD_OFFSET(0x3e,2)
-#define CPLD_CCD_IO2	CPLD_OFFSET(0x3e,3)
-#define CPLD_CCD_DIR3	CPLD_OFFSET(0x3f,0)
-#define CPLD_CCD_IO3	CPLD_OFFSET(0x3f,1)
-
-static void __iomem *cpld;
-
-
-/* NOTE:  this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
- * swap chips with a different block size, partitioning will
- * need to be changed. This NAND chip MT29F16G08FAA is the default
- * NAND shipped with the Spectrum Digital DM365 EVM
- */
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 30 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem1",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.core_chipsel		= 0,
-	.mask_chipsel		= BIT(14),
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.bbt_options		= NAND_BBT_USE_FLASH,
-	.ecc_bits		= 4,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM365_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM365_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM365_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 0,
-		.num_resources	= ARRAY_SIZE(davinci_nand_resources),
-		.resource	= davinci_nand_resources,
-		.dev		= {
-			.platform_data	= &davinci_nand_data,
-		},
-	}
-};
-
-static struct resource davinci_aemif_resources[] = {
-	{
-		.start		= DM365_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct aemif_abus_data da850_evm_aemif_abus_data[] = {
-	{
-		.cs		= 1,
-	},
-};
-
-static struct aemif_platform_data davinci_aemif_pdata = {
-	.abus_data		= da850_evm_aemif_abus_data,
-	.num_abus_data		= ARRAY_SIZE(da850_evm_aemif_abus_data),
-	.sub_devices		= davinci_aemif_devices,
-	.num_sub_devices	= ARRAY_SIZE(davinci_aemif_devices),
-};
-
-static struct platform_device davinci_aemif_device = {
-	.name			= "ti-aemif",
-	.id			= -1,
-	.dev = {
-		.platform_data	= &davinci_aemif_pdata,
-	},
-	.resource		= davinci_aemif_resources,
-	.num_resources		= ARRAY_SIZE(davinci_aemif_resources),
-};
-
-static struct nvmem_cell_info davinci_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x7f00,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table davinci_nvmem_cell_table = {
-	.nvmem_name	= "1-00500",
-	.cells		= davinci_nvmem_cells,
-	.ncells		= ARRAY_SIZE(davinci_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup davinci_nvmem_cell_lookup = {
-	.nvmem_name	= "1-00500",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static const struct property_entry eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 64),
-	{ }
-};
-
-static struct i2c_board_info i2c_info[] = {
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.properties = eeprom_properties,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 400	/* kHz */,
-	.bus_delay	= 0	/* usec */,
-};
-
-/* Fixed regulator support */
-static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
-	/* Baseboard 3.3V: 5V -> TPS767D301 -> 3.3V */
-	REGULATOR_SUPPLY("AVDD", "1-0018"),
-	REGULATOR_SUPPLY("DRVDD", "1-0018"),
-	REGULATOR_SUPPLY("IOVDD", "1-0018"),
-};
-
-static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
-	/* Baseboard 1.8V: 5V -> TPS767D301 -> 1.8V */
-	REGULATOR_SUPPLY("DVDD", "1-0018"),
-};
-
-static int dm365evm_keyscan_enable(struct device *dev)
-{
-	return davinci_cfg_reg(DM365_KEYSCAN);
-}
-
-static unsigned short dm365evm_keymap[] = {
-	KEY_KP2,
-	KEY_LEFT,
-	KEY_EXIT,
-	KEY_DOWN,
-	KEY_ENTER,
-	KEY_UP,
-	KEY_KP1,
-	KEY_RIGHT,
-	KEY_MENU,
-	KEY_RECORD,
-	KEY_REWIND,
-	KEY_KPMINUS,
-	KEY_STOP,
-	KEY_FASTFORWARD,
-	KEY_KPPLUS,
-	KEY_PLAYPAUSE,
-	0
-};
-
-static struct davinci_ks_platform_data dm365evm_ks_data = {
-	.device_enable	= dm365evm_keyscan_enable,
-	.keymap		= dm365evm_keymap,
-	.keymapsize	= ARRAY_SIZE(dm365evm_keymap),
-	.rep		= 1,
-	/* Scan period = strobe + interval */
-	.strobe		= 0x5,
-	.interval	= 0x2,
-	.matrix_type	= DAVINCI_KEYSCAN_MATRIX_4X4,
-};
-
-static int cpld_mmc_get_cd(int module)
-{
-	if (!cpld)
-		return -ENXIO;
-
-	/* low == card present */
-	return !(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 4 : 0));
-}
-
-static int cpld_mmc_get_ro(int module)
-{
-	if (!cpld)
-		return -ENXIO;
-
-	/* high == card's write protect switch active */
-	return !!(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 5 : 1));
-}
-
-static struct davinci_mmc_config dm365evm_mmc_config = {
-	.get_cd		= cpld_mmc_get_cd,
-	.get_ro		= cpld_mmc_get_ro,
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static void dm365evm_emac_configure(void)
-{
-	/*
-	 * EMAC pins are multiplexed with GPIO and UART
-	 * Further details are available at the DM365 ARM
-	 * Subsystem Users Guide(sprufg5.pdf) pages 125 - 127
-	 */
-	davinci_cfg_reg(DM365_EMAC_TX_EN);
-	davinci_cfg_reg(DM365_EMAC_TX_CLK);
-	davinci_cfg_reg(DM365_EMAC_COL);
-	davinci_cfg_reg(DM365_EMAC_TXD3);
-	davinci_cfg_reg(DM365_EMAC_TXD2);
-	davinci_cfg_reg(DM365_EMAC_TXD1);
-	davinci_cfg_reg(DM365_EMAC_TXD0);
-	davinci_cfg_reg(DM365_EMAC_RXD3);
-	davinci_cfg_reg(DM365_EMAC_RXD2);
-	davinci_cfg_reg(DM365_EMAC_RXD1);
-	davinci_cfg_reg(DM365_EMAC_RXD0);
-	davinci_cfg_reg(DM365_EMAC_RX_CLK);
-	davinci_cfg_reg(DM365_EMAC_RX_DV);
-	davinci_cfg_reg(DM365_EMAC_RX_ER);
-	davinci_cfg_reg(DM365_EMAC_CRS);
-	davinci_cfg_reg(DM365_EMAC_MDIO);
-	davinci_cfg_reg(DM365_EMAC_MDCLK);
-
-	/*
-	 * EMAC interrupts are multiplexed with GPIO interrupts
-	 * Details are available at the DM365 ARM
-	 * Subsystem Users Guide(sprufg5.pdf) pages 133 - 134
-	 */
-	davinci_cfg_reg(DM365_INT_EMAC_RXTHRESH);
-	davinci_cfg_reg(DM365_INT_EMAC_RXPULSE);
-	davinci_cfg_reg(DM365_INT_EMAC_TXPULSE);
-	davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE);
-}
-
-static void dm365evm_mmc_configure(void)
-{
-	/*
-	 * MMC/SD pins are multiplexed with GPIO and EMIF
-	 * Further details are available at the DM365 ARM
-	 * Subsystem Users Guide(sprufg5.pdf) pages 118, 128 - 131
-	 */
-	davinci_cfg_reg(DM365_SD1_CLK);
-	davinci_cfg_reg(DM365_SD1_CMD);
-	davinci_cfg_reg(DM365_SD1_DATA3);
-	davinci_cfg_reg(DM365_SD1_DATA2);
-	davinci_cfg_reg(DM365_SD1_DATA1);
-	davinci_cfg_reg(DM365_SD1_DATA0);
-}
-
-static struct tvp514x_platform_data tvp5146_pdata = {
-	.clk_polarity = 0,
-	.hs_polarity = 1,
-	.vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL        (V4L2_STD_NTSC | V4L2_STD_PAL)
-/* Inputs available at the TVP5146 */
-static struct v4l2_input tvp5146_inputs[] = {
-	{
-		.index = 0,
-		.name = "Composite",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-	{
-		.index = 1,
-		.name = "S-Video",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-};
-
-/*
- * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
- * with tvp5146_inputs
- */
-static struct vpfe_route tvp5146_routes[] = {
-	{
-		.input = INPUT_CVBS_VI2B,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-{
-		.input = INPUT_SVIDEO_VI2C_VI1C,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpfe_subdev_info vpfe_sub_devs[] = {
-	{
-		.name = "tvp5146",
-		.grp_id = 0,
-		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
-		.inputs = tvp5146_inputs,
-		.routes = tvp5146_routes,
-		.can_route = 1,
-		.ccdc_if_params = {
-			.if_type = VPFE_BT656,
-			.hdpol = VPFE_PINPOL_POSITIVE,
-			.vdpol = VPFE_PINPOL_POSITIVE,
-		},
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-};
-
-static struct vpfe_config vpfe_cfg = {
-	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
-	.sub_devs = vpfe_sub_devs,
-	.i2c_adapter_id = 1,
-	.card_name = "DM365 EVM",
-	.ccdc = "ISIF",
-};
-
-/* venc standards timings */
-static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = {
-	{
-		.name		= "ntsc",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_NTSC,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {11, 10},
-		.fps		= {30000, 1001},
-		.left_margin	= 0x79,
-		.upper_margin	= 0x10,
-	},
-	{
-		.name		= "pal",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_PAL,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {54, 59},
-		.fps		= {25, 1},
-		.left_margin	= 0x7E,
-		.upper_margin	= 0x16,
-	},
-};
-
-/* venc dv timings */
-static struct vpbe_enc_mode_info dm365evm_enc_preset_timing[] = {
-	{
-		.name		= "480p59_94",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_720X480P59_94,
-		.interlaced	= 0,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {1, 1},
-		.fps		= {5994, 100},
-		.left_margin	= 0x8F,
-		.upper_margin	= 0x2D,
-	},
-	{
-		.name		= "576p50",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_720X576P50,
-		.interlaced	= 0,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {1, 1},
-		.fps		= {50, 1},
-		.left_margin	= 0x8C,
-		.upper_margin   = 0x36,
-	},
-	{
-		.name		= "720p60",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_1280X720P60,
-		.interlaced	= 0,
-		.xres		= 1280,
-		.yres		= 720,
-		.aspect		= {1, 1},
-		.fps		= {60, 1},
-		.left_margin	= 0x117,
-		.right_margin	= 70,
-		.upper_margin	= 38,
-		.lower_margin	= 3,
-		.hsync_len	= 80,
-		.vsync_len	= 5,
-	},
-	{
-		.name		= "1080i60",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_1920X1080I60,
-		.interlaced	= 1,
-		.xres		= 1920,
-		.yres		= 1080,
-		.aspect		= {1, 1},
-		.fps		= {30, 1},
-		.left_margin	= 0xc9,
-		.right_margin	= 80,
-		.upper_margin	= 30,
-		.lower_margin	= 3,
-		.hsync_len	= 88,
-		.vsync_len	= 5,
-	},
-};
-
-#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-
-/*
- * The outputs available from VPBE + ecnoders. Keep the
- * the order same as that of encoders. First those from venc followed by that
- * from encoders. Index in the output refers to index on a particular
- * encoder.Driver uses this index to pass it to encoder when it supports more
- * than one output. Application uses index of the array to set an output.
- */
-static struct vpbe_output dm365evm_vpbe_outputs[] = {
-	{
-		.output		= {
-			.index		= 0,
-			.name		= "Composite",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.std		= VENC_STD_ALL,
-			.capabilities	= V4L2_OUT_CAP_STD,
-		},
-		.subdev_name	= DM365_VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "ntsc",
-		.num_modes	= ARRAY_SIZE(dm365evm_enc_std_timing),
-		.modes		= dm365evm_enc_std_timing,
-		.if_params	= MEDIA_BUS_FMT_FIXED,
-	},
-	{
-		.output		= {
-			.index		= 1,
-			.name		= "Component",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities	= V4L2_OUT_CAP_DV_TIMINGS,
-		},
-		.subdev_name	= DM365_VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "480p59_94",
-		.num_modes	= ARRAY_SIZE(dm365evm_enc_preset_timing),
-		.modes		= dm365evm_enc_preset_timing,
-		.if_params	= MEDIA_BUS_FMT_FIXED,
-	},
-};
-
-/*
- * Amplifiers on the board
- */
-static struct ths7303_platform_data ths7303_pdata = {
-	.ch_1 = 3,
-	.ch_2 = 3,
-	.ch_3 = 3,
-};
-
-static struct amp_config_info vpbe_amp = {
-	.module_name	= "ths7303",
-	.is_i2c		= 1,
-	.board_info	= {
-		I2C_BOARD_INFO("ths7303", 0x2c),
-		.platform_data = &ths7303_pdata,
-	}
-};
-
-static struct vpbe_config dm365evm_display_cfg = {
-	.module_name	= "dm365-vpbe-display",
-	.i2c_adapter_id	= 1,
-	.amp		= &vpbe_amp,
-	.osd		= {
-		.module_name	= DM365_VPBE_OSD_SUBDEV_NAME,
-	},
-	.venc		= {
-		.module_name	= DM365_VPBE_VENC_SUBDEV_NAME,
-	},
-	.num_outputs	= ARRAY_SIZE(dm365evm_vpbe_outputs),
-	.outputs	= dm365evm_vpbe_outputs,
-};
-
-static void __init evm_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-}
-
-static inline int have_leds(void)
-{
-#ifdef CONFIG_LEDS_CLASS
-	return 1;
-#else
-	return 0;
-#endif
-}
-
-struct cpld_led {
-	struct led_classdev	cdev;
-	u8			mask;
-};
-
-static const struct {
-	const char *name;
-	const char *trigger;
-} cpld_leds[] = {
-	{ "dm365evm::ds2", },
-	{ "dm365evm::ds3", },
-	{ "dm365evm::ds4", },
-	{ "dm365evm::ds5", },
-	{ "dm365evm::ds6", "nand-disk", },
-	{ "dm365evm::ds7", "mmc1", },
-	{ "dm365evm::ds8", "mmc0", },
-	{ "dm365evm::ds9", "heartbeat", },
-};
-
-static void cpld_led_set(struct led_classdev *cdev, enum led_brightness b)
-{
-	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
-	u8 reg = __raw_readb(cpld + CPLD_LEDS);
-
-	if (b != LED_OFF)
-		reg &= ~led->mask;
-	else
-		reg |= led->mask;
-	__raw_writeb(reg, cpld + CPLD_LEDS);
-}
-
-static enum led_brightness cpld_led_get(struct led_classdev *cdev)
-{
-	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
-	u8 reg = __raw_readb(cpld + CPLD_LEDS);
-
-	return (reg & led->mask) ? LED_OFF : LED_FULL;
-}
-
-static int __init cpld_leds_init(void)
-{
-	int	i;
-
-	if (!have_leds() ||  !cpld)
-		return 0;
-
-	/* setup LEDs */
-	__raw_writeb(0xff, cpld + CPLD_LEDS);
-	for (i = 0; i < ARRAY_SIZE(cpld_leds); i++) {
-		struct cpld_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = cpld_leds[i].name;
-		led->cdev.brightness_set = cpld_led_set;
-		led->cdev.brightness_get = cpld_led_get;
-		led->cdev.default_trigger = cpld_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-/* run after subsys_initcall() for LEDs */
-fs_initcall(cpld_leds_init);
-
-
-static void __init evm_init_cpld(void)
-{
-	u8 mux, resets;
-	const char *label;
-	struct clk *aemif_clk;
-	int rc;
-
-	/* Make sure we can configure the CPLD through CS1.  Then
-	 * leave it on for later access to MMC and LED registers.
-	 */
-	aemif_clk = clk_get(NULL, "aemif");
-	if (IS_ERR(aemif_clk))
-		return;
-	clk_prepare_enable(aemif_clk);
-
-	if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE,
-			"cpld") == NULL)
-		goto fail;
-	cpld = ioremap(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE);
-	if (!cpld) {
-		release_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE,
-				SECTION_SIZE);
-fail:
-		pr_err("ERROR: can't map CPLD\n");
-		clk_disable_unprepare(aemif_clk);
-		return;
-	}
-
-	/* External muxing for some signals */
-	mux = 0;
-
-	/* Read SW5 to set up NAND + keypad _or_ OneNAND (sync read).
-	 * NOTE:  SW4 bus width setting must match!
-	 */
-	if ((__raw_readb(cpld + CPLD_SWITCH) & BIT(5)) == 0) {
-		/* external keypad mux */
-		mux |= BIT(7);
-
-		rc = platform_device_register(&davinci_aemif_device);
-		if (rc)
-			pr_warn("%s(): error registering the aemif device: %d\n",
-				__func__, rc);
-	} else {
-		/* no OneNAND support yet */
-	}
-
-	/* Leave external chips in reset when unused. */
-	resets = BIT(3) | BIT(2) | BIT(1) | BIT(0);
-
-	/* Static video input config with SN74CBT16214 1-of-3 mux:
-	 *  - port b1 == tvp7002 (mux lowbits == 1 or 6)
-	 *  - port b2 == imager (mux lowbits == 2 or 7)
-	 *  - port b3 == tvp5146 (mux lowbits == 5)
-	 *
-	 * Runtime switching could work too, with limitations.
-	 */
-	if (have_imager()) {
-		label = "HD imager";
-		mux |= 2;
-
-		/* externally mux MMC1/ENET/AIC33 to imager */
-		mux |= BIT(6) | BIT(5) | BIT(3);
-	} else {
-		struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-		/* we can use MMC1 ... */
-		dm365evm_mmc_configure();
-		davinci_setup_mmc(1, &dm365evm_mmc_config);
-
-		/* ... and ENET ... */
-		dm365evm_emac_configure();
-		soc_info->emac_pdata->phy_id = DM365_EVM_PHY_ID;
-		resets &= ~BIT(3);
-
-		/* ... and AIC33 */
-		resets &= ~BIT(1);
-
-		if (have_tvp7002()) {
-			mux |= 1;
-			resets &= ~BIT(2);
-			label = "tvp7002 HD";
-		} else {
-			/* default to tvp5146 */
-			mux |= 5;
-			resets &= ~BIT(0);
-			label = "tvp5146 SD";
-		}
-	}
-	__raw_writeb(mux, cpld + CPLD_MUX);
-	__raw_writeb(resets, cpld + CPLD_RESETS);
-	pr_info("EVM: %s video input\n", label);
-
-	/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
-}
-
-static void __init dm365_evm_map_io(void)
-{
-	dm365_init();
-}
-
-static struct spi_eeprom at25640 = {
-	.byte_len	= SZ_64K / 8,
-	.name		= "at25640",
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static const struct spi_board_info dm365_evm_spi_info[] __initconst = {
-	{
-		.modalias	= "at25",
-		.platform_data	= &at25640,
-		.max_speed_hz	= 10 * 1000 * 1000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static __init void dm365_evm_init(void)
-{
-	int ret;
-
-	dm365_register_clocks();
-
-	ret = dm365_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,
-				     ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
-	regulator_register_always_on(1, "fixed-dummy", fixed_supplies_3_3v,
-				     ARRAY_SIZE(fixed_supplies_3_3v), 3300000);
-
-	nvmem_add_cell_table(&davinci_nvmem_cell_table);
-	nvmem_add_cell_lookups(&davinci_nvmem_cell_lookup, 1);
-
-	evm_init_i2c();
-	davinci_serial_init(dm365_serial_device);
-
-	dm365evm_emac_configure();
-	dm365evm_mmc_configure();
-
-	davinci_setup_mmc(0, &dm365evm_mmc_config);
-
-	dm365_init_video(&vpfe_cfg, &dm365evm_display_cfg);
-
-	/* maybe setup mmc1/etc ... _after_ mmc0 */
-	evm_init_cpld();
-
-#ifdef CONFIG_SND_SOC_DM365_AIC3X_CODEC
-	dm365_init_asp();
-#elif defined(CONFIG_SND_SOC_DM365_VOICE_CODEC)
-	dm365_init_vc();
-#endif
-	dm365_init_rtc();
-	dm365_init_ks(&dm365evm_ks_data);
-
-	dm365_init_spi0(BIT(0), dm365_evm_spi_info,
-			ARRAY_SIZE(dm365_evm_spi_info));
-}
-
-MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
-	.atag_offset	= 0x100,
-	.map_io		= dm365_evm_map_io,
-	.init_irq	= dm365_init_irq,
-	.init_time	= dm365_init_time,
-	.init_machine	= dm365_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
-
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
deleted file mode 100644
index 7755cccec550..000000000000
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ /dev/null
@@ -1,928 +0,0 @@
-/*
- * TI DaVinci EVM board support
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/property.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/nvmem-provider.h>
-#include <linux/phy.h>
-#include <linux/clk.h>
-#include <linux/videodev2.h>
-#include <linux/v4l2-dv-timings.h>
-#include <linux/export.h>
-#include <linux/leds.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <media/i2c/tvp514x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/mux.h>
-#include <mach/serial.h>
-
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-
-#include "davinci.h"
-#include "irqs.h"
-
-#define DM644X_EVM_PHY_ID		"davinci_mdio-0:01"
-#define LXT971_PHY_ID	(0x001378e2)
-#define LXT971_PHY_MASK	(0xfffffff0)
-
-static struct mtd_partition davinci_evm_norflash_partitions[] = {
-	/* bootloader (UBL, U-Boot, etc) in first 5 sectors */
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 5 * SZ_64K,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next 1 sectors */
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_64K,
-		.mask_flags	= 0,
-	},
-	/* kernel */
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0
-	},
-	/* file system */
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data davinci_evm_norflash_data = {
-	.width		= 2,
-	.parts		= davinci_evm_norflash_partitions,
-	.nr_parts	= ARRAY_SIZE(davinci_evm_norflash_partitions),
-};
-
-/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
- * limits addresses to 16M, so using addresses past 16M will wrap */
-static struct resource davinci_evm_norflash_resource = {
-	.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
-	.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device davinci_evm_norflash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &davinci_evm_norflash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &davinci_evm_norflash_resource,
-};
-
-/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks).
- * It may used instead of the (default) NOR chip to boot, using TI's
- * tools to install the secondary boot loader (UBL) and U-Boot.
- */
-static struct mtd_partition davinci_evm_nandflash_partition[] = {
-	/* Bootloader layout depends on whose u-boot is installed, but we
-	 * can hide all the details.
-	 *  - block 0 for u-boot environment ... in mainline u-boot
-	 *  - block 1 for UBL (plus up to four backup copies in blocks 2..5)
-	 *  - blocks 6...? for u-boot
-	 *  - blocks 16..23 for u-boot environment ... in TI's u-boot
-	 */
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_256K + SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* Kernel */
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	},
-	/* File system (older GIT kernels started this on the 5MB mark) */
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* A few blocks at end hold a flash BBT ... created by TI's CCS
-	 * using flashwriter_nand.out, but ignored by TI's versions of
-	 * Linux and u-boot.  We boot faster by using them.
-	 */
-};
-
-static struct davinci_aemif_timing davinci_evm_nandflash_timing = {
-	.wsetup		= 20,
-	.wstrobe	= 40,
-	.whold		= 20,
-	.rsetup		= 10,
-	.rstrobe	= 40,
-	.rhold		= 10,
-	.ta		= 40,
-};
-
-static struct davinci_nand_pdata davinci_evm_nandflash_data = {
-	.core_chipsel	= 0,
-	.parts		= davinci_evm_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(davinci_evm_nandflash_partition),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits	= 1,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.timing		= &davinci_evm_nandflash_timing,
-};
-
-static struct resource davinci_evm_nandflash_resource[] = {
-	{
-		.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource davinci_evm_aemif_resource[] = {
-	{
-		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct aemif_abus_data davinci_evm_aemif_abus_data[] = {
-	{
-		.cs		= 1,
-	},
-};
-
-static struct platform_device davinci_evm_nandflash_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 0,
-		.dev		= {
-			.platform_data	= &davinci_evm_nandflash_data,
-		},
-		.num_resources	= ARRAY_SIZE(davinci_evm_nandflash_resource),
-		.resource	= davinci_evm_nandflash_resource,
-	},
-};
-
-static struct aemif_platform_data davinci_evm_aemif_pdata = {
-	.abus_data = davinci_evm_aemif_abus_data,
-	.num_abus_data = ARRAY_SIZE(davinci_evm_aemif_abus_data),
-	.sub_devices = davinci_evm_nandflash_devices,
-	.num_sub_devices = ARRAY_SIZE(davinci_evm_nandflash_devices),
-};
-
-static struct platform_device davinci_evm_aemif_device = {
-	.name			= "ti-aemif",
-	.id			= -1,
-	.dev = {
-		.platform_data	= &davinci_evm_aemif_pdata,
-	},
-	.resource		= davinci_evm_aemif_resource,
-	.num_resources		= ARRAY_SIZE(davinci_evm_aemif_resource),
-};
-
-static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device davinci_fb_device = {
-	.name		= "davincifb",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &davinci_fb_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.num_resources = 0,
-};
-
-static struct tvp514x_platform_data dm644xevm_tvp5146_pdata = {
-	.clk_polarity = 0,
-	.hs_polarity = 1,
-	.vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-/* Inputs available at the TVP5146 */
-static struct v4l2_input dm644xevm_tvp5146_inputs[] = {
-	{
-		.index = 0,
-		.name = "Composite",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-	{
-		.index = 1,
-		.name = "S-Video",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-};
-
-/*
- * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
- * with tvp5146_inputs
- */
-static struct vpfe_route dm644xevm_tvp5146_routes[] = {
-	{
-		.input = INPUT_CVBS_VI2B,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-	{
-		.input = INPUT_SVIDEO_VI2C_VI1C,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpfe_subdev_info dm644xevm_vpfe_sub_devs[] = {
-	{
-		.name = "tvp5146",
-		.grp_id = 0,
-		.num_inputs = ARRAY_SIZE(dm644xevm_tvp5146_inputs),
-		.inputs = dm644xevm_tvp5146_inputs,
-		.routes = dm644xevm_tvp5146_routes,
-		.can_route = 1,
-		.ccdc_if_params = {
-			.if_type = VPFE_BT656,
-			.hdpol = VPFE_PINPOL_POSITIVE,
-			.vdpol = VPFE_PINPOL_POSITIVE,
-		},
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &dm644xevm_tvp5146_pdata,
-		},
-	},
-};
-
-static struct vpfe_config dm644xevm_capture_cfg = {
-	.num_subdevs = ARRAY_SIZE(dm644xevm_vpfe_sub_devs),
-	.i2c_adapter_id = 1,
-	.sub_devs = dm644xevm_vpfe_sub_devs,
-	.card_name = "DM6446 EVM",
-	.ccdc = "DM6446 CCDC",
-};
-
-static struct platform_device rtc_dev = {
-	.name           = "rtc_davinci_evm",
-	.id             = -1,
-};
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_I2C
-/*
- * I2C GPIO expanders
- */
-
-#define PCF_Uxx_BASE(x)	(DAVINCI_N_GPIO + ((x) * 8))
-
-
-/* U2 -- LEDs */
-
-static struct gpio_led evm_leds[] = {
-	{ .name = "DS8", .active_low = 1,
-		.default_trigger = "heartbeat", },
-	{ .name = "DS7", .active_low = 1, },
-	{ .name = "DS6", .active_low = 1, },
-	{ .name = "DS5", .active_low = 1, },
-	{ .name = "DS4", .active_low = 1, },
-	{ .name = "DS3", .active_low = 1, },
-	{ .name = "DS2", .active_low = 1,
-		.default_trigger = "mmc0", },
-	{ .name = "DS1", .active_low = 1,
-		.default_trigger = "disk-activity", },
-};
-
-static const struct gpio_led_platform_data evm_led_data = {
-	.num_leds	= ARRAY_SIZE(evm_leds),
-	.leds		= evm_leds,
-};
-
-static struct platform_device *evm_led_dev;
-
-static int
-evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	struct gpio_led *leds = evm_leds;
-	int status;
-
-	while (ngpio--) {
-		leds->gpio = gpio++;
-		leds++;
-	}
-
-	/* what an extremely annoying way to be forced to handle
-	 * device unregistration ...
-	 */
-	evm_led_dev = platform_device_alloc("leds-gpio", 0);
-	platform_device_add_data(evm_led_dev,
-			&evm_led_data, sizeof evm_led_data);
-
-	evm_led_dev->dev.parent = &client->dev;
-	status = platform_device_add(evm_led_dev);
-	if (status < 0) {
-		platform_device_put(evm_led_dev);
-		evm_led_dev = NULL;
-	}
-	return status;
-}
-
-static int
-evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	if (evm_led_dev) {
-		platform_device_unregister(evm_led_dev);
-		evm_led_dev = NULL;
-	}
-	return 0;
-}
-
-static struct pcf857x_platform_data pcf_data_u2 = {
-	.gpio_base	= PCF_Uxx_BASE(0),
-	.setup		= evm_led_setup,
-	.teardown	= evm_led_teardown,
-};
-
-
-/* U18 - A/V clock generator and user switch */
-
-static int sw_gpio;
-
-static ssize_t
-sw_show(struct device *d, struct device_attribute *a, char *buf)
-{
-	char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n";
-
-	strcpy(buf, s);
-	return strlen(s);
-}
-
-static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL);
-
-static int
-evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	int	status;
-
-	/* export dip switch option */
-	sw_gpio = gpio + 7;
-	status = gpio_request(sw_gpio, "user_sw");
-	if (status == 0)
-		status = gpio_direction_input(sw_gpio);
-	if (status == 0)
-		status = device_create_file(&client->dev, &dev_attr_user_sw);
-	else
-		gpio_free(sw_gpio);
-	if (status != 0)
-		sw_gpio = -EINVAL;
-
-	/* audio PLL:  48 kHz (vs 44.1 or 32), single rate (vs double) */
-	gpio_request(gpio + 3, "pll_fs2");
-	gpio_direction_output(gpio + 3, 0);
-
-	gpio_request(gpio + 2, "pll_fs1");
-	gpio_direction_output(gpio + 2, 0);
-
-	gpio_request(gpio + 1, "pll_sr");
-	gpio_direction_output(gpio + 1, 0);
-
-	return 0;
-}
-
-static int
-evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	gpio_free(gpio + 1);
-	gpio_free(gpio + 2);
-	gpio_free(gpio + 3);
-
-	if (sw_gpio > 0) {
-		device_remove_file(&client->dev, &dev_attr_user_sw);
-		gpio_free(sw_gpio);
-	}
-	return 0;
-}
-
-static struct pcf857x_platform_data pcf_data_u18 = {
-	.gpio_base	= PCF_Uxx_BASE(1),
-	.n_latch	= (1 << 3) | (1 << 2) | (1 << 1),
-	.setup		= evm_u18_setup,
-	.teardown	= evm_u18_teardown,
-};
-
-
-/* U35 - various I/O signals used to manage USB, CF, ATA, etc */
-
-static int
-evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	/* p0 = nDRV_VBUS (initial:  don't supply it) */
-	gpio_request(gpio + 0, "nDRV_VBUS");
-	gpio_direction_output(gpio + 0, 1);
-
-	/* p1 = VDDIMX_EN */
-	gpio_request(gpio + 1, "VDDIMX_EN");
-	gpio_direction_output(gpio + 1, 1);
-
-	/* p2 = VLYNQ_EN */
-	gpio_request(gpio + 2, "VLYNQ_EN");
-	gpio_direction_output(gpio + 2, 1);
-
-	/* p3 = n3V3_CF_RESET (initial: stay in reset) */
-	gpio_request(gpio + 3, "nCF_RESET");
-	gpio_direction_output(gpio + 3, 0);
-
-	/* (p4 unused) */
-
-	/* p5 = 1V8_WLAN_RESET (initial: stay in reset) */
-	gpio_request(gpio + 5, "WLAN_RESET");
-	gpio_direction_output(gpio + 5, 1);
-
-	/* p6 = nATA_SEL (initial: select) */
-	gpio_request(gpio + 6, "nATA_SEL");
-	gpio_direction_output(gpio + 6, 0);
-
-	/* p7 = nCF_SEL (initial: deselect) */
-	gpio_request(gpio + 7, "nCF_SEL");
-	gpio_direction_output(gpio + 7, 1);
-
-	return 0;
-}
-
-static int
-evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
-	gpio_free(gpio + 7);
-	gpio_free(gpio + 6);
-	gpio_free(gpio + 5);
-	gpio_free(gpio + 3);
-	gpio_free(gpio + 2);
-	gpio_free(gpio + 1);
-	gpio_free(gpio + 0);
-	return 0;
-}
-
-static struct pcf857x_platform_data pcf_data_u35 = {
-	.gpio_base	= PCF_Uxx_BASE(2),
-	.setup		= evm_u35_setup,
-	.teardown	= evm_u35_teardown,
-};
-
-/*----------------------------------------------------------------------*/
-
-/* Most of this EEPROM is unused, but U-Boot uses some data:
- *  - 0x7f00, 6 bytes Ethernet Address
- *  - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
- *  - ... newer boards may have more
- */
-
-static struct nvmem_cell_info dm644evm_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x7f00,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table dm644evm_nvmem_cell_table = {
-	.nvmem_name	= "1-00500",
-	.cells		= dm644evm_nvmem_cells,
-	.ncells		= ARRAY_SIZE(dm644evm_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup dm644evm_nvmem_cell_lookup = {
-	.nvmem_name	= "1-00500",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static const struct property_entry eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 64),
-	{ }
-};
-
-/*
- * MSP430 supports RTC, card detection, input from IR remote, and
- * a bit more.  It triggers interrupts on GPIO(7) from pressing
- * buttons on the IR remote, and for card detect switches.
- */
-static struct i2c_client *dm6446evm_msp;
-
-static int dm6446evm_msp_probe(struct i2c_client *client)
-{
-	dm6446evm_msp = client;
-	return 0;
-}
-
-static int dm6446evm_msp_remove(struct i2c_client *client)
-{
-	dm6446evm_msp = NULL;
-	return 0;
-}
-
-static const struct i2c_device_id dm6446evm_msp_ids[] = {
-	{ "dm6446evm_msp", 0, },
-	{ /* end of list */ },
-};
-
-static struct i2c_driver dm6446evm_msp_driver = {
-	.driver.name	= "dm6446evm_msp",
-	.id_table	= dm6446evm_msp_ids,
-	.probe_new	= dm6446evm_msp_probe,
-	.remove		= dm6446evm_msp_remove,
-};
-
-static int dm6444evm_msp430_get_pins(void)
-{
-	static const char txbuf[2] = { 2, 4, };
-	char buf[4];
-	struct i2c_msg msg[2] = {
-		{
-			.flags = 0,
-			.len = 2,
-			.buf = (void __force *)txbuf,
-		},
-		{
-			.flags = I2C_M_RD,
-			.len = 4,
-			.buf = buf,
-		},
-	};
-	int status;
-
-	if (!dm6446evm_msp)
-		return -ENXIO;
-
-	msg[0].addr = dm6446evm_msp->addr;
-	msg[1].addr = dm6446evm_msp->addr;
-
-	/* Command 4 == get input state, returns port 2 and port3 data
-	 *   S Addr W [A] len=2 [A] cmd=4 [A]
-	 *   RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
-	 */
-	status = i2c_transfer(dm6446evm_msp->adapter, msg, 2);
-	if (status < 0)
-		return status;
-
-	dev_dbg(&dm6446evm_msp->dev, "PINS: %4ph\n", buf);
-
-	return (buf[3] << 8) | buf[2];
-}
-
-static int dm6444evm_mmc_get_cd(int module)
-{
-	int status = dm6444evm_msp430_get_pins();
-
-	return (status < 0) ? status : !(status & BIT(1));
-}
-
-static int dm6444evm_mmc_get_ro(int module)
-{
-	int status = dm6444evm_msp430_get_pins();
-
-	return (status < 0) ? status : status & BIT(6 + 8);
-}
-
-static struct davinci_mmc_config dm6446evm_mmc_config = {
-	.get_cd		= dm6444evm_mmc_get_cd,
-	.get_ro		= dm6444evm_mmc_get_ro,
-	.wires		= 4,
-};
-
-static struct i2c_board_info __initdata i2c_info[] =  {
-	{
-		I2C_BOARD_INFO("dm6446evm_msp", 0x23),
-	},
-	{
-		I2C_BOARD_INFO("pcf8574", 0x38),
-		.platform_data	= &pcf_data_u2,
-	},
-	{
-		I2C_BOARD_INFO("pcf8574", 0x39),
-		.platform_data	= &pcf_data_u18,
-	},
-	{
-		I2C_BOARD_INFO("pcf8574", 0x3a),
-		.platform_data	= &pcf_data_u35,
-	},
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.properties = eeprom_properties,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic33", 0x1b),
-	},
-};
-
-#define DM644X_I2C_SDA_PIN	GPIO_TO_PIN(2, 12)
-#define DM644X_I2C_SCL_PIN	GPIO_TO_PIN(2, 11)
-
-static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
-	.dev_id = "i2c_davinci.1",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SDA_PIN, "sda",
-			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl",
-			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		{ }
-	},
-};
-
-/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
- * which requires 100 usec of idle bus after i2c writes sent to it.
- */
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 20 /* kHz */,
-	.bus_delay	= 100 /* usec */,
-	.gpio_recovery	= true,
-};
-
-static void __init evm_init_i2c(void)
-{
-	gpiod_add_lookup_table(&i2c_recovery_gpiod_table);
-	davinci_init_i2c(&i2c_pdata);
-	i2c_add_driver(&dm6446evm_msp_driver);
-	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-}
-#endif
-
-/* Fixed regulator support */
-static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
-	/* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */
-	REGULATOR_SUPPLY("AVDD", "1-001b"),
-	REGULATOR_SUPPLY("DRVDD", "1-001b"),
-};
-
-static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
-	/* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */
-	REGULATOR_SUPPLY("IOVDD", "1-001b"),
-	REGULATOR_SUPPLY("DVDD", "1-001b"),
-};
-
-#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-
-/* venc standard timings */
-static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = {
-	{
-		.name		= "ntsc",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_NTSC,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {11, 10},
-		.fps		= {30000, 1001},
-		.left_margin	= 0x79,
-		.upper_margin	= 0x10,
-	},
-	{
-		.name		= "pal",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_PAL,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {54, 59},
-		.fps		= {25, 1},
-		.left_margin	= 0x7e,
-		.upper_margin	= 0x16,
-	},
-};
-
-/* venc dv preset timings */
-static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = {
-	{
-		.name		= "480p59_94",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_720X480P59_94,
-		.interlaced	= 0,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {1, 1},
-		.fps		= {5994, 100},
-		.left_margin	= 0x80,
-		.upper_margin	= 0x20,
-	},
-	{
-		.name		= "576p50",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_720X576P50,
-		.interlaced	= 0,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {1, 1},
-		.fps		= {50, 1},
-		.left_margin	= 0x7e,
-		.upper_margin	= 0x30,
-	},
-};
-
-/*
- * The outputs available from VPBE + encoders. Keep the order same
- * as that of encoders. First those from venc followed by that from
- * encoders. Index in the output refers to index on a particular encoder.
- * Driver uses this index to pass it to encoder when it supports more
- * than one output. Userspace applications use index of the array to
- * set an output.
- */
-static struct vpbe_output dm644xevm_vpbe_outputs[] = {
-	{
-		.output		= {
-			.index		= 0,
-			.name		= "Composite",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.std		= VENC_STD_ALL,
-			.capabilities	= V4L2_OUT_CAP_STD,
-		},
-		.subdev_name	= DM644X_VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "ntsc",
-		.num_modes	= ARRAY_SIZE(dm644xevm_enc_std_timing),
-		.modes		= dm644xevm_enc_std_timing,
-	},
-	{
-		.output		= {
-			.index		= 1,
-			.name		= "Component",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities	= V4L2_OUT_CAP_DV_TIMINGS,
-		},
-		.subdev_name	= DM644X_VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "480p59_94",
-		.num_modes	= ARRAY_SIZE(dm644xevm_enc_preset_timing),
-		.modes		= dm644xevm_enc_preset_timing,
-	},
-};
-
-static struct vpbe_config dm644xevm_display_cfg = {
-	.module_name	= "dm644x-vpbe-display",
-	.i2c_adapter_id	= 1,
-	.osd		= {
-		.module_name	= DM644X_VPBE_OSD_SUBDEV_NAME,
-	},
-	.venc		= {
-		.module_name	= DM644X_VPBE_VENC_SUBDEV_NAME,
-	},
-	.num_outputs	= ARRAY_SIZE(dm644xevm_vpbe_outputs),
-	.outputs	= dm644xevm_vpbe_outputs,
-};
-
-static struct platform_device *davinci_evm_devices[] __initdata = {
-	&davinci_fb_device,
-	&rtc_dev,
-};
-
-static void __init
-davinci_evm_map_io(void)
-{
-	dm644x_init();
-}
-
-static int davinci_phy_fixup(struct phy_device *phydev)
-{
-	unsigned int control;
-	/* CRITICAL: Fix for increasing PHY signal drive strength for
-	 * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
-	 * signal strength was low causing  TX to fail randomly. The
-	 * fix is to Set bit 11 (Increased MII drive strength) of PHY
-	 * register 26 (Digital Config register) on this phy. */
-	control = phy_read(phydev, 26);
-	phy_write(phydev, 26, (control | 0x800));
-	return 0;
-}
-
-#define HAS_ATA		(IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-			 IS_ENABLED(CONFIG_PATA_BK3710))
-
-#define HAS_NOR		IS_ENABLED(CONFIG_MTD_PHYSMAP)
-
-#define HAS_NAND	IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
-
-#define GPIO_nVBUS_DRV		160
-
-static struct gpiod_lookup_table dm644evm_usb_gpio_table = {
-	.dev_id = "musb-davinci",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", GPIO_nVBUS_DRV, NULL,
-			    GPIO_ACTIVE_HIGH),
-		{ }
-	},
-};
-
-static __init void davinci_evm_init(void)
-{
-	int ret;
-	struct clk *aemif_clk;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	dm644x_register_clocks();
-
-	regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,
-				     ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
-	regulator_register_always_on(1, "fixed-dummy", fixed_supplies_3_3v,
-				     ARRAY_SIZE(fixed_supplies_3_3v), 3300000);
-
-	dm644x_init_devices();
-
-	ret = dm644x_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	aemif_clk = clk_get(NULL, "aemif");
-	clk_prepare_enable(aemif_clk);
-
-	if (HAS_ATA) {
-		if (HAS_NAND || HAS_NOR)
-			pr_warn("WARNING: both IDE and Flash are enabled, but they share AEMIF pins\n"
-				"\tDisable IDE for NAND/NOR support\n");
-		davinci_init_ide();
-	} else if (HAS_NAND || HAS_NOR) {
-		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
-		davinci_cfg_reg(DM644X_ATAEN_DISABLE);
-
-		/* only one device will be jumpered and detected */
-		if (HAS_NAND) {
-			platform_device_register(&davinci_evm_aemif_device);
-#ifdef CONFIG_I2C
-			evm_leds[7].default_trigger = "nand-disk";
-#endif
-			if (HAS_NOR)
-				pr_warn("WARNING: both NAND and NOR flash are enabled; disable one of them.\n");
-		} else if (HAS_NOR)
-			platform_device_register(&davinci_evm_norflash_device);
-	}
-
-	platform_add_devices(davinci_evm_devices,
-			     ARRAY_SIZE(davinci_evm_devices));
-#ifdef CONFIG_I2C
-	nvmem_add_cell_table(&dm644evm_nvmem_cell_table);
-	nvmem_add_cell_lookups(&dm644evm_nvmem_cell_lookup, 1);
-	evm_init_i2c();
-	davinci_setup_mmc(0, &dm6446evm_mmc_config);
-#endif
-	dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
-
-	davinci_serial_init(dm644x_serial_device);
-	dm644x_init_asp();
-
-	/* irlml6401 switches over 1A, in under 8 msec */
-	gpiod_add_lookup_table(&dm644evm_usb_gpio_table);
-	davinci_setup_usb(1000, 8);
-
-	if (IS_BUILTIN(CONFIG_PHYLIB)) {
-		soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
-		/* Register the fixup for PHY on DaVinci */
-		phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
-						davinci_phy_fixup);
-	}
-}
-
-MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
-	/* Maintainer: MontaVista Software <source@mvista.com> */
-	.atag_offset  = 0x100,
-	.map_io	      = davinci_evm_map_io,
-	.init_irq     = dm644x_init_irq,
-	.init_time	= dm644x_init_time,
-	.init_machine = davinci_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
deleted file mode 100644
index 952ddabc743e..000000000000
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ /dev/null
@@ -1,872 +0,0 @@
-/*
- * TI DaVinci DM646X EVM board
- *
- * Derived from: arch/arm/mach-davinci/board-evm.c
- * Copyright (C) 2006 Texas Instruments.
- *
- * (C) 2007-2008, MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- */
-
-/**************************************************************************
- * Included Files
- **************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/property.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/ti-aemif.h>
-
-#include <media/i2c/tvp514x.h>
-#include <media/i2c/adv7343.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/nvmem-provider.h>
-#include <linux/clk.h>
-#include <linux/export.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/serial.h>
-
-#include "davinci.h"
-#include "irqs.h"
-
-#define NAND_BLOCK_SIZE		SZ_128K
-
-/* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot
- * and U-Boot environment this avoids dependency on any particular combination
- * of UBL, U-Boot or flashing tools etc.
- */
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL, U-Boot with environment */
-		.name		= "bootloader",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 16 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-};
-
-static struct davinci_aemif_timing dm6467tevm_nandflash_timing = {
-	.wsetup		= 29,
-	.wstrobe	= 24,
-	.whold		= 14,
-	.rsetup		= 19,
-	.rstrobe	= 33,
-	.rhold		= 0,
-	.ta		= 29,
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.core_chipsel		= 0,
-	.mask_cle 		= 0x80000,
-	.mask_ale 		= 0x40000,
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits		= 1,
-	.options		= 0,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM646X_ASYNC_EMIF_CS2_SPACE_BASE,
-		.end		= DM646X_ASYNC_EMIF_CS2_SPACE_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM646X_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 0,
-		.num_resources	= ARRAY_SIZE(davinci_nand_resources),
-		.resource	= davinci_nand_resources,
-		.dev		= {
-			.platform_data	= &davinci_nand_data,
-		},
-	},
-};
-
-static struct resource davinci_aemif_resources[] = {
-	{
-		.start	= DM646X_ASYNC_EMIF_CONTROL_BASE,
-		.end	= DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct aemif_abus_data davinci_aemif_abus_data[] = {
-	{
-		.cs	= 1,
-	},
-};
-
-static struct aemif_platform_data davinci_aemif_pdata = {
-	.abus_data		= davinci_aemif_abus_data,
-	.num_abus_data		= ARRAY_SIZE(davinci_aemif_abus_data),
-	.sub_devices		= davinci_aemif_devices,
-	.num_sub_devices	= ARRAY_SIZE(davinci_aemif_devices),
-};
-
-static struct platform_device davinci_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data	= &davinci_aemif_pdata,
-	},
-	.resource	= davinci_aemif_resources,
-	.num_resources	= ARRAY_SIZE(davinci_aemif_resources),
-};
-
-#define HAS_ATA		(IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-			 IS_ENABLED(CONFIG_PATA_BK3710))
-
-#ifdef CONFIG_I2C
-/* CPLD Register 0 bits to control ATA */
-#define DM646X_EVM_ATA_RST		BIT(0)
-#define DM646X_EVM_ATA_PWD		BIT(1)
-
-/* CPLD Register 0 Client: used for I/O Control */
-static int cpld_reg0_probe(struct i2c_client *client)
-{
-	if (HAS_ATA) {
-		u8 data;
-		struct i2c_msg msg[2] = {
-			{
-				.addr = client->addr,
-				.flags = I2C_M_RD,
-				.len = 1,
-				.buf = &data,
-			},
-			{
-				.addr = client->addr,
-				.flags = 0,
-				.len = 1,
-				.buf = &data,
-			},
-		};
-
-		/* Clear ATA_RSTn and ATA_PWD bits to enable ATA operation. */
-		i2c_transfer(client->adapter, msg, 1);
-		data &= ~(DM646X_EVM_ATA_RST | DM646X_EVM_ATA_PWD);
-		i2c_transfer(client->adapter, msg + 1, 1);
-	}
-
-	return 0;
-}
-
-static const struct i2c_device_id cpld_reg_ids[] = {
-	{ "cpld_reg0", 0, },
-	{ },
-};
-
-static struct i2c_driver dm6467evm_cpld_driver = {
-	.driver.name	= "cpld_reg0",
-	.id_table	= cpld_reg_ids,
-	.probe_new	= cpld_reg0_probe,
-};
-
-/* LEDS */
-
-static struct gpio_led evm_leds[] = {
-	{ .name = "DS1", .active_low = 1, },
-	{ .name = "DS2", .active_low = 1, },
-	{ .name = "DS3", .active_low = 1, },
-	{ .name = "DS4", .active_low = 1, },
-};
-
-static const struct gpio_led_platform_data evm_led_data = {
-	.num_leds = ARRAY_SIZE(evm_leds),
-	.leds     = evm_leds,
-};
-
-static struct platform_device *evm_led_dev;
-
-static int evm_led_setup(struct i2c_client *client, int gpio,
-			unsigned int ngpio, void *c)
-{
-	struct gpio_led *leds = evm_leds;
-	int status;
-
-	while (ngpio--) {
-		leds->gpio = gpio++;
-		leds++;
-	}
-
-	evm_led_dev = platform_device_alloc("leds-gpio", 0);
-	platform_device_add_data(evm_led_dev, &evm_led_data,
-				sizeof(evm_led_data));
-
-	evm_led_dev->dev.parent = &client->dev;
-	status = platform_device_add(evm_led_dev);
-	if (status < 0) {
-		platform_device_put(evm_led_dev);
-		evm_led_dev = NULL;
-	}
-	return status;
-}
-
-static int evm_led_teardown(struct i2c_client *client, int gpio,
-				unsigned ngpio, void *c)
-{
-	if (evm_led_dev) {
-		platform_device_unregister(evm_led_dev);
-		evm_led_dev = NULL;
-	}
-	return 0;
-}
-
-static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
-
-static int evm_sw_setup(struct i2c_client *client, int gpio,
-			unsigned ngpio, void *c)
-{
-	int status;
-	int i;
-	char label[10];
-
-	for (i = 0; i < 4; ++i) {
-		snprintf(label, 10, "user_sw%d", i);
-		status = gpio_request(gpio, label);
-		if (status)
-			goto out_free;
-		evm_sw_gpio[i] = gpio++;
-
-		status = gpio_direction_input(evm_sw_gpio[i]);
-		if (status)
-			goto out_free;
-
-		status = gpio_export(evm_sw_gpio[i], 0);
-		if (status)
-			goto out_free;
-	}
-	return 0;
-
-out_free:
-	for (i = 0; i < 4; ++i) {
-		if (evm_sw_gpio[i] != -EINVAL) {
-			gpio_free(evm_sw_gpio[i]);
-			evm_sw_gpio[i] = -EINVAL;
-		}
-	}
-	return status;
-}
-
-static int evm_sw_teardown(struct i2c_client *client, int gpio,
-			unsigned ngpio, void *c)
-{
-	int i;
-
-	for (i = 0; i < 4; ++i) {
-		if (evm_sw_gpio[i] != -EINVAL) {
-			gpio_unexport(evm_sw_gpio[i]);
-			gpio_free(evm_sw_gpio[i]);
-			evm_sw_gpio[i] = -EINVAL;
-		}
-	}
-	return 0;
-}
-
-static int evm_pcf_setup(struct i2c_client *client, int gpio,
-			unsigned int ngpio, void *c)
-{
-	int status;
-
-	if (ngpio < 8)
-		return -EINVAL;
-
-	status = evm_sw_setup(client, gpio, 4, c);
-	if (status)
-		return status;
-
-	return evm_led_setup(client, gpio+4, 4, c);
-}
-
-static int evm_pcf_teardown(struct i2c_client *client, int gpio,
-			unsigned int ngpio, void *c)
-{
-	BUG_ON(ngpio < 8);
-
-	evm_sw_teardown(client, gpio, 4, c);
-	evm_led_teardown(client, gpio+4, 4, c);
-
-	return 0;
-}
-
-static struct pcf857x_platform_data pcf_data = {
-	.gpio_base	= DAVINCI_N_GPIO+1,
-	.setup		= evm_pcf_setup,
-	.teardown	= evm_pcf_teardown,
-};
-
-/* Most of this EEPROM is unused, but U-Boot uses some data:
- *  - 0x7f00, 6 bytes Ethernet Address
- *  - ... newer boards may have more
- */
-
-static struct nvmem_cell_info dm646x_evm_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x7f00,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table dm646x_evm_nvmem_cell_table = {
-	.nvmem_name	= "1-00500",
-	.cells		= dm646x_evm_nvmem_cells,
-	.ncells		= ARRAY_SIZE(dm646x_evm_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup dm646x_evm_nvmem_cell_lookup = {
-	.nvmem_name	= "1-00500",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static const struct property_entry eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 64),
-	{ }
-};
-#endif
-
-static u8 dm646x_iis_serializer_direction[] = {
-       TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE,
-};
-
-static u8 dm646x_dit_serializer_direction[] = {
-       TX_MODE,
-};
-
-static struct snd_platform_data dm646x_evm_snd_data[] = {
-	{
-		.tx_dma_offset  = 0x400,
-		.rx_dma_offset  = 0x400,
-		.op_mode        = DAVINCI_MCASP_IIS_MODE,
-		.num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction),
-		.tdm_slots      = 2,
-		.serial_dir     = dm646x_iis_serializer_direction,
-		.asp_chan_q     = EVENTQ_0,
-	},
-	{
-		.tx_dma_offset  = 0x400,
-		.rx_dma_offset  = 0,
-		.op_mode        = DAVINCI_MCASP_DIT_MODE,
-		.num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction),
-		.tdm_slots      = 32,
-		.serial_dir     = dm646x_dit_serializer_direction,
-		.asp_chan_q     = EVENTQ_0,
-	},
-};
-
-#ifdef CONFIG_I2C
-static struct i2c_client *cpld_client;
-
-static int cpld_video_probe(struct i2c_client *client)
-{
-	cpld_client = client;
-	return 0;
-}
-
-static int cpld_video_remove(struct i2c_client *client)
-{
-	cpld_client = NULL;
-	return 0;
-}
-
-static const struct i2c_device_id cpld_video_id[] = {
-	{ "cpld_video", 0 },
-	{ }
-};
-
-static struct i2c_driver cpld_video_driver = {
-	.driver = {
-		.name	= "cpld_video",
-	},
-	.probe_new	= cpld_video_probe,
-	.remove		= cpld_video_remove,
-	.id_table	= cpld_video_id,
-};
-
-static void evm_init_cpld(void)
-{
-	i2c_add_driver(&cpld_video_driver);
-}
-
-static struct i2c_board_info __initdata i2c_info[] =  {
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.properties  = eeprom_properties,
-	},
-	{
-		I2C_BOARD_INFO("pcf8574a", 0x38),
-		.platform_data	= &pcf_data,
-	},
-	{
-		I2C_BOARD_INFO("cpld_reg0", 0x3a),
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic33", 0x18),
-	},
-	{
-		I2C_BOARD_INFO("cpld_video", 0x3b),
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq       = 100 /* kHz */,
-	.bus_delay      = 0 /* usec */,
-};
-
-#define VCH2CLK_MASK		(BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
-#define VCH2CLK_SYSCLK8		(BIT(9))
-#define VCH2CLK_AUXCLK		(BIT(9) | BIT(8))
-#define VCH3CLK_MASK		(BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
-#define VCH3CLK_SYSCLK8		(BIT(13))
-#define VCH3CLK_AUXCLK		(BIT(14) | BIT(13))
-
-#define VIDCH2CLK		(BIT(10))
-#define VIDCH3CLK		(BIT(11))
-#define VIDCH1CLK		(BIT(4))
-#define TVP7002_INPUT		(BIT(4))
-#define TVP5147_INPUT		(~BIT(4))
-#define VPIF_INPUT_ONE_CHANNEL	(BIT(5))
-#define VPIF_INPUT_TWO_CHANNEL	(~BIT(5))
-#define TVP5147_CH0		"tvp514x-0"
-#define TVP5147_CH1		"tvp514x-1"
-
-/* spin lock for updating above registers */
-static spinlock_t vpif_reg_lock;
-
-static int set_vpif_clock(int mux_mode, int hd)
-{
-	unsigned long flags;
-	unsigned int value;
-	int val = 0;
-	int err = 0;
-
-	if (!cpld_client)
-		return -ENXIO;
-
-	/* disable the clock */
-	spin_lock_irqsave(&vpif_reg_lock, flags);
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-	value |= (VIDCH3CLK | VIDCH2CLK);
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-	spin_unlock_irqrestore(&vpif_reg_lock, flags);
-
-	val = i2c_smbus_read_byte(cpld_client);
-	if (val < 0)
-		return val;
-
-	if (mux_mode == 1)
-		val &= ~0x40;
-	else
-		val |= 0x40;
-
-	err = i2c_smbus_write_byte(cpld_client, val);
-	if (err)
-		return err;
-
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
-	value &= ~(VCH2CLK_MASK);
-	value &= ~(VCH3CLK_MASK);
-
-	if (hd >= 1)
-		value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8);
-	else
-		value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK);
-
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
-
-	spin_lock_irqsave(&vpif_reg_lock, flags);
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-	/* enable the clock */
-	value &= ~(VIDCH3CLK | VIDCH2CLK);
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-	spin_unlock_irqrestore(&vpif_reg_lock, flags);
-
-	return 0;
-}
-
-static struct vpif_subdev_info dm646x_vpif_subdev[] = {
-	{
-		.name	= "adv7343",
-		.board_info = {
-			I2C_BOARD_INFO("adv7343", 0x2a),
-		},
-	},
-	{
-		.name	= "ths7303",
-		.board_info = {
-			I2C_BOARD_INFO("ths7303", 0x2c),
-		},
-	},
-};
-
-static const struct vpif_output dm6467_ch0_outputs[] = {
-	{
-		.output = {
-			.index = 0,
-			.name = "Composite",
-			.type = V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities = V4L2_OUT_CAP_STD,
-			.std = V4L2_STD_ALL,
-		},
-		.subdev_name = "adv7343",
-		.output_route = ADV7343_COMPOSITE_ID,
-	},
-	{
-		.output = {
-			.index = 1,
-			.name = "Component",
-			.type = V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities = V4L2_OUT_CAP_DV_TIMINGS,
-		},
-		.subdev_name = "adv7343",
-		.output_route = ADV7343_COMPONENT_ID,
-	},
-	{
-		.output = {
-			.index = 2,
-			.name = "S-Video",
-			.type = V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities = V4L2_OUT_CAP_STD,
-			.std = V4L2_STD_ALL,
-		},
-		.subdev_name = "adv7343",
-		.output_route = ADV7343_SVIDEO_ID,
-	},
-};
-
-static struct vpif_display_config dm646x_vpif_display_config = {
-	.set_clock	= set_vpif_clock,
-	.subdevinfo	= dm646x_vpif_subdev,
-	.subdev_count	= ARRAY_SIZE(dm646x_vpif_subdev),
-	.i2c_adapter_id = 1,
-	.chan_config[0] = {
-		.outputs = dm6467_ch0_outputs,
-		.output_count = ARRAY_SIZE(dm6467_ch0_outputs),
-	},
-	.card_name	= "DM646x EVM Video Display",
-};
-
-/**
- * setup_vpif_input_path()
- * @channel: channel id (0 - CH0, 1 - CH1)
- * @sub_dev_name: ptr sub device name
- *
- * This will set vpif input to capture data from tvp514x or
- * tvp7002.
- */
-static int setup_vpif_input_path(int channel, const char *sub_dev_name)
-{
-	int err = 0;
-	int val;
-
-	/* for channel 1, we don't do anything */
-	if (channel != 0)
-		return 0;
-
-	if (!cpld_client)
-		return -ENXIO;
-
-	val = i2c_smbus_read_byte(cpld_client);
-	if (val < 0)
-		return val;
-
-	if (!strcmp(sub_dev_name, TVP5147_CH0) ||
-	    !strcmp(sub_dev_name, TVP5147_CH1))
-		val &= TVP5147_INPUT;
-	else
-		val |= TVP7002_INPUT;
-
-	err = i2c_smbus_write_byte(cpld_client, val);
-	if (err)
-		return err;
-	return 0;
-}
-
-/**
- * setup_vpif_input_channel_mode()
- * @mux_mode:  mux mode. 0 - 1 channel or (1) - 2 channel
- *
- * This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147)
- */
-static int setup_vpif_input_channel_mode(int mux_mode)
-{
-	unsigned long flags;
-	int err = 0;
-	int val;
-	u32 value;
-
-	if (!cpld_client)
-		return -ENXIO;
-
-	val = i2c_smbus_read_byte(cpld_client);
-	if (val < 0)
-		return val;
-
-	spin_lock_irqsave(&vpif_reg_lock, flags);
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
-	if (mux_mode) {
-		val &= VPIF_INPUT_TWO_CHANNEL;
-		value |= VIDCH1CLK;
-	} else {
-		val |= VPIF_INPUT_ONE_CHANNEL;
-		value &= ~VIDCH1CLK;
-	}
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
-	spin_unlock_irqrestore(&vpif_reg_lock, flags);
-
-	err = i2c_smbus_write_byte(cpld_client, val);
-	if (err)
-		return err;
-
-	return 0;
-}
-
-static struct tvp514x_platform_data tvp5146_pdata = {
-	.clk_polarity = 0,
-	.hs_polarity = 1,
-	.vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
-
-static struct vpif_subdev_info vpif_capture_sdev_info[] = {
-	{
-		.name	= TVP5147_CH0,
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-	{
-		.name	= TVP5147_CH1,
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5c),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-};
-
-static struct vpif_input dm6467_ch0_inputs[] = {
-	{
-		.input = {
-			.index = 0,
-			.name = "Composite",
-			.type = V4L2_INPUT_TYPE_CAMERA,
-			.capabilities = V4L2_IN_CAP_STD,
-			.std = TVP514X_STD_ALL,
-		},
-		.subdev_name = TVP5147_CH0,
-		.input_route = INPUT_CVBS_VI2B,
-		.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpif_input dm6467_ch1_inputs[] = {
-       {
-		.input = {
-			.index = 0,
-			.name = "S-Video",
-			.type = V4L2_INPUT_TYPE_CAMERA,
-			.capabilities = V4L2_IN_CAP_STD,
-			.std = TVP514X_STD_ALL,
-		},
-		.subdev_name = TVP5147_CH1,
-		.input_route = INPUT_SVIDEO_VI2C_VI1C,
-		.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpif_capture_config dm646x_vpif_capture_cfg = {
-	.setup_input_path = setup_vpif_input_path,
-	.setup_input_channel_mode = setup_vpif_input_channel_mode,
-	.subdev_info = vpif_capture_sdev_info,
-	.subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
-	.i2c_adapter_id = 1,
-	.chan_config[0] = {
-		.inputs = dm6467_ch0_inputs,
-		.input_count = ARRAY_SIZE(dm6467_ch0_inputs),
-		.vpif_if = {
-			.if_type = VPIF_IF_BT656,
-			.hd_pol = 1,
-			.vd_pol = 1,
-			.fid_pol = 0,
-		},
-	},
-	.chan_config[1] = {
-		.inputs = dm6467_ch1_inputs,
-		.input_count = ARRAY_SIZE(dm6467_ch1_inputs),
-		.vpif_if = {
-			.if_type = VPIF_IF_BT656,
-			.hd_pol = 1,
-			.vd_pol = 1,
-			.fid_pol = 0,
-		},
-	},
-	.card_name = "DM646x EVM Video Capture",
-};
-
-static void __init evm_init_video(void)
-{
-	spin_lock_init(&vpif_reg_lock);
-
-	dm646x_setup_vpif(&dm646x_vpif_display_config,
-			  &dm646x_vpif_capture_cfg);
-}
-
-static void __init evm_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-	i2c_add_driver(&dm6467evm_cpld_driver);
-	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-	evm_init_cpld();
-	evm_init_video();
-}
-#endif
-
-#define DM646X_REF_FREQ			27000000
-#define DM646X_AUX_FREQ			24000000
-#define DM6467T_EVM_REF_FREQ		33000000
-
-static void __init davinci_map_io(void)
-{
-	dm646x_init();
-}
-
-static void __init dm646x_evm_init_time(void)
-{
-	dm646x_init_time(DM646X_REF_FREQ, DM646X_AUX_FREQ);
-}
-
-static void __init dm6467t_evm_init_time(void)
-{
-	dm646x_init_time(DM6467T_EVM_REF_FREQ, DM646X_AUX_FREQ);
-}
-
-#define DM646X_EVM_PHY_ID		"davinci_mdio-0:01"
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on dm646x, hence they are being
- * reserved for codecs on the DSP side.
- */
-static const s16 dm646x_dma_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 0,  4},
-	{13,  3},
-	{24,  4},
-	{30,  2},
-	{54,  3},
-	{-1, -1}
-};
-
-static const s16 dm646x_dma_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 0,  4},
-	{13,  3},
-	{24,  4},
-	{30,  2},
-	{54,  3},
-	{128, 384},
-	{-1, -1}
-};
-
-static struct edma_rsv_info dm646x_edma_rsv[] = {
-	{
-		.rsv_chans	= dm646x_dma_rsv_chans,
-		.rsv_slots	= dm646x_dma_rsv_slots,
-	},
-};
-
-static __init void evm_init(void)
-{
-	int ret;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	dm646x_register_clocks();
-
-	ret = dm646x_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-#ifdef CONFIG_I2C
-	nvmem_add_cell_table(&dm646x_evm_nvmem_cell_table);
-	nvmem_add_cell_lookups(&dm646x_evm_nvmem_cell_lookup, 1);
-	evm_init_i2c();
-#endif
-
-	davinci_serial_init(dm646x_serial_device);
-	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
-	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
-
-	if (machine_is_davinci_dm6467tevm())
-		davinci_nand_data.timing = &dm6467tevm_nandflash_timing;
-
-	if (platform_device_register(&davinci_aemif_device))
-		pr_warn("%s: Cannot register AEMIF device.\n", __func__);
-
-	dm646x_init_edma(dm646x_edma_rsv);
-
-	if (HAS_ATA)
-		davinci_init_ide();
-
-	soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID;
-}
-
-MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
-	.atag_offset  = 0x100,
-	.map_io       = davinci_map_io,
-	.init_irq     = dm646x_init_irq,
-	.init_time	= dm646x_evm_init_time,
-	.init_machine = evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
-
-MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
-	.atag_offset  = 0x100,
-	.map_io       = davinci_map_io,
-	.init_irq     = dm646x_init_irq,
-	.init_time	= dm6467t_evm_init_time,
-	.init_machine = evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
-
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
deleted file mode 100644
index 5205008c8061..000000000000
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ /dev/null
@@ -1,635 +0,0 @@
-/*
- * Critical Link MityOMAP-L138 SoM
- *
- * Copyright (C) 2010 Critical Link LLC - https://www.criticallink.com
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of
- * any kind, whether express or implied.
- */
-
-#define pr_fmt(fmt) "MityOMAPL138: " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/platform_device.h>
-#include <linux/property.h>
-#include <linux/mtd/partitions.h>
-#include <linux/notifier.h>
-#include <linux/nvmem-consumer.h>
-#include <linux/nvmem-provider.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c.h>
-#include <linux/etherdevice.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/common.h>
-#include <mach/da8xx.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <mach/mux.h>
-#include <linux/platform_data/spi-davinci.h>
-
-#define MITYOMAPL138_PHY_ID		""
-
-#define FACTORY_CONFIG_MAGIC	0x012C0138
-#define FACTORY_CONFIG_VERSION	0x00010001
-
-/* Data Held in On-Board I2C device */
-struct factory_config {
-	u32	magic;
-	u32	version;
-	u8	mac[6];
-	u32	fpga_type;
-	u32	spare;
-	u32	serialnumber;
-	char	partnum[32];
-};
-
-static struct factory_config factory_config;
-
-#ifdef CONFIG_CPU_FREQ
-struct part_no_info {
-	const char	*part_no;	/* part number string of interest */
-	int		max_freq;	/* khz */
-};
-
-static struct part_no_info mityomapl138_pn_info[] = {
-	{
-		.part_no	= "L138-C",
-		.max_freq	= 300000,
-	},
-	{
-		.part_no	= "L138-D",
-		.max_freq	= 375000,
-	},
-	{
-		.part_no	= "L138-F",
-		.max_freq	= 456000,
-	},
-	{
-		.part_no	= "1808-C",
-		.max_freq	= 300000,
-	},
-	{
-		.part_no	= "1808-D",
-		.max_freq	= 375000,
-	},
-	{
-		.part_no	= "1808-F",
-		.max_freq	= 456000,
-	},
-	{
-		.part_no	= "1810-D",
-		.max_freq	= 375000,
-	},
-};
-
-static void mityomapl138_cpufreq_init(const char *partnum)
-{
-	int i, ret;
-
-	for (i = 0; partnum && i < ARRAY_SIZE(mityomapl138_pn_info); i++) {
-		/*
-		 * the part number has additional characters beyond what is
-		 * stored in the table.  This information is not needed for
-		 * determining the speed grade, and would require several
-		 * more table entries.  Only check the first N characters
-		 * for a match.
-		 */
-		if (!strncmp(partnum, mityomapl138_pn_info[i].part_no,
-			     strlen(mityomapl138_pn_info[i].part_no))) {
-			da850_max_speed = mityomapl138_pn_info[i].max_freq;
-			break;
-		}
-	}
-
-	ret = da850_register_cpufreq("pll0_sysclk3");
-	if (ret)
-		pr_warn("cpufreq registration failed: %d\n", ret);
-}
-#else
-static void mityomapl138_cpufreq_init(const char *partnum) { }
-#endif
-
-static int read_factory_config(struct notifier_block *nb,
-			       unsigned long event, void *data)
-{
-	int ret;
-	const char *partnum = NULL;
-	struct nvmem_device *nvmem = data;
-
-	if (strcmp(nvmem_dev_name(nvmem), "1-00500") != 0)
-		return NOTIFY_DONE;
-
-	if (!IS_BUILTIN(CONFIG_NVMEM)) {
-		pr_warn("Factory Config not available without CONFIG_NVMEM\n");
-		goto bad_config;
-	}
-
-	ret = nvmem_device_read(nvmem, 0, sizeof(factory_config),
-				&factory_config);
-	if (ret != sizeof(struct factory_config)) {
-		pr_warn("Read Factory Config Failed: %d\n", ret);
-		goto bad_config;
-	}
-
-	if (factory_config.magic != FACTORY_CONFIG_MAGIC) {
-		pr_warn("Factory Config Magic Wrong (%X)\n",
-			factory_config.magic);
-		goto bad_config;
-	}
-
-	if (factory_config.version != FACTORY_CONFIG_VERSION) {
-		pr_warn("Factory Config Version Wrong (%X)\n",
-			factory_config.version);
-		goto bad_config;
-	}
-
-	partnum = factory_config.partnum;
-	pr_info("Part Number = %s\n", partnum);
-
-bad_config:
-	/* default maximum speed is valid for all platforms */
-	mityomapl138_cpufreq_init(partnum);
-
-	return NOTIFY_STOP;
-}
-
-static struct notifier_block mityomapl138_nvmem_notifier = {
-	.notifier_call = read_factory_config,
-};
-
-/*
- * We don't define a cell for factory config as it will be accessed from the
- * board file using the nvmem notifier chain.
- */
-static struct nvmem_cell_info mityomapl138_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x64,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table mityomapl138_nvmem_cell_table = {
-	.nvmem_name	= "1-00500",
-	.cells		= mityomapl138_nvmem_cells,
-	.ncells		= ARRAY_SIZE(mityomapl138_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup mityomapl138_nvmem_cell_lookup = {
-	.nvmem_name	= "1-00500",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static const struct property_entry mityomapl138_fd_chip_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 8),
-	PROPERTY_ENTRY_BOOL("read-only"),
-	{ }
-};
-
-static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
-};
-
-/* TPS65023 voltage regulator support */
-/* 1.2V Core */
-static struct regulator_consumer_supply tps65023_dcdc1_consumers[] = {
-	{
-		.supply = "cvdd",
-	},
-};
-
-/* 1.8V */
-static struct regulator_consumer_supply tps65023_dcdc2_consumers[] = {
-	{
-		.supply = "usb0_vdda18",
-	},
-	{
-		.supply = "usb1_vdda18",
-	},
-	{
-		.supply = "ddr_dvdd18",
-	},
-	{
-		.supply = "sata_vddr",
-	},
-};
-
-/* 1.2V */
-static struct regulator_consumer_supply tps65023_dcdc3_consumers[] = {
-	{
-		.supply = "sata_vdd",
-	},
-	{
-		.supply = "usb_cvdd",
-	},
-	{
-		.supply = "pll0_vdda",
-	},
-	{
-		.supply = "pll1_vdda",
-	},
-};
-
-/* 1.8V Aux LDO, not used */
-static struct regulator_consumer_supply tps65023_ldo1_consumers[] = {
-	{
-		.supply = "1.8v_aux",
-	},
-};
-
-/* FPGA VCC Aux (2.5 or 3.3) LDO */
-static struct regulator_consumer_supply tps65023_ldo2_consumers[] = {
-	{
-		.supply = "vccaux",
-	},
-};
-
-static struct regulator_init_data tps65023_regulator_data[] = {
-	/* dcdc1 */
-	{
-		.constraints = {
-			.min_uV = 1150000,
-			.max_uV = 1350000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc1_consumers),
-		.consumer_supplies = tps65023_dcdc1_consumers,
-	},
-	/* dcdc2 */
-	{
-		.constraints = {
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc2_consumers),
-		.consumer_supplies = tps65023_dcdc2_consumers,
-	},
-	/* dcdc3 */
-	{
-		.constraints = {
-			.min_uV = 1200000,
-			.max_uV = 1200000,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc3_consumers),
-		.consumer_supplies = tps65023_dcdc3_consumers,
-	},
-	/* ldo1 */
-	{
-		.constraints = {
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_ldo1_consumers),
-		.consumer_supplies = tps65023_ldo1_consumers,
-	},
-	/* ldo2 */
-	{
-		.constraints = {
-			.min_uV = 2500000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_ldo2_consumers),
-		.consumer_supplies = tps65023_ldo2_consumers,
-	},
-};
-
-static struct i2c_board_info __initdata mityomap_tps65023_info[] = {
-	{
-		I2C_BOARD_INFO("tps65023", 0x48),
-		.platform_data = &tps65023_regulator_data[0],
-	},
-	{
-		I2C_BOARD_INFO("24c02", 0x50),
-		.properties = mityomapl138_fd_chip_properties,
-	},
-};
-
-static int __init pmic_tps65023_init(void)
-{
-	return i2c_register_board_info(1, mityomap_tps65023_info,
-					ARRAY_SIZE(mityomap_tps65023_info));
-}
-
-/*
- * SPI Devices:
- *	SPI1_CS0: 8M Flash ST-M25P64-VME6G
- */
-static struct mtd_partition spi_flash_partitions[] = {
-	[0] = {
-		.name		= "ubl",
-		.offset		= 0,
-		.size		= SZ_64K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[1] = {
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[2] = {
-		.name		= "u-boot-env",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_64K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[3] = {
-		.name		= "periph-config",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_64K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[4] = {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_256K + SZ_64K,
-	},
-	[5] = {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M + SZ_1M,
-	},
-	[6] = {
-		.name		= "fpga",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-	},
-	[7] = {
-		.name		= "spare",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct flash_platform_data mityomapl138_spi_flash_data = {
-	.name		= "m25p80",
-	.parts		= spi_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(spi_flash_partitions),
-	.type		= "m24p64",
-};
-
-static struct davinci_spi_config spi_eprom_config = {
-	.io_type	= SPI_IO_TYPE_DMA,
-	.c2tdelay	= 8,
-	.t2cdelay	= 8,
-};
-
-static struct spi_board_info mityomapl138_spi_flash_info[] = {
-	{
-		.modalias		= "m25p80",
-		.platform_data		= &mityomapl138_spi_flash_data,
-		.controller_data	= &spi_eprom_config,
-		.mode			= SPI_MODE_0,
-		.max_speed_hz		= 30000000,
-		.bus_num		= 1,
-		.chip_select		= 0,
-	},
-};
-
-/*
- * MityDSP-L138 includes a 256 MByte large-page NAND flash
- * (128K blocks).
- */
-static struct mtd_partition mityomapl138_nandflash_partition[] = {
-	{
-		.name		= "rootfs",
-		.offset		= 0,
-		.size		= SZ_128M,
-		.mask_flags	= 0, /* MTD_WRITEABLE, */
-	},
-	{
-		.name		= "homefs",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static struct davinci_nand_pdata mityomapl138_nandflash_data = {
-	.core_chipsel	= 1,
-	.parts		= mityomapl138_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(mityomapl138_nandflash_partition),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.options	= NAND_BUSWIDTH_16,
-	.ecc_bits	= 1, /* 4 bit mode is not supported with 16 bit NAND */
-};
-
-static struct resource mityomapl138_nandflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device mityomapl138_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 1,
-		.dev		= {
-			.platform_data	= &mityomapl138_nandflash_data,
-		},
-		.num_resources	= ARRAY_SIZE(mityomapl138_nandflash_resource),
-		.resource	= mityomapl138_nandflash_resource,
-	},
-};
-
-static struct resource mityomapl138_aemif_resources[] = {
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct aemif_abus_data mityomapl138_aemif_abus_data[] = {
-	{
-		.cs	= 1,
-	},
-};
-
-static struct aemif_platform_data mityomapl138_aemif_pdata = {
-	.abus_data		= mityomapl138_aemif_abus_data,
-	.num_abus_data		= ARRAY_SIZE(mityomapl138_aemif_abus_data),
-	.sub_devices		= mityomapl138_aemif_devices,
-	.num_sub_devices	= ARRAY_SIZE(mityomapl138_aemif_devices),
-};
-
-static struct platform_device mityomapl138_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data	= &mityomapl138_aemif_pdata,
-	},
-	.resource	= mityomapl138_aemif_resources,
-	.num_resources	= ARRAY_SIZE(mityomapl138_aemif_resources),
-};
-
-static void __init mityomapl138_setup_nand(void)
-{
-	if (platform_device_register(&mityomapl138_aemif_device))
-		pr_warn("%s: Cannot register AEMIF device\n", __func__);
-}
-
-static const short mityomap_mii_pins[] = {
-	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
-	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
-	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static const short mityomap_rmii_pins[] = {
-	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
-	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
-	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static void __init mityomapl138_config_emac(void)
-{
-	void __iomem *cfg_chip3_base;
-	int ret;
-	u32 val;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	soc_info->emac_pdata->rmii_en = 0; /* hardcoded for now */
-
-	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
-	val = __raw_readl(cfg_chip3_base);
-
-	if (soc_info->emac_pdata->rmii_en) {
-		val |= BIT(8);
-		ret = davinci_cfg_reg_list(mityomap_rmii_pins);
-		pr_info("RMII PHY configured\n");
-	} else {
-		val &= ~BIT(8);
-		ret = davinci_cfg_reg_list(mityomap_mii_pins);
-		pr_info("MII PHY configured\n");
-	}
-
-	if (ret) {
-		pr_warn("mii/rmii mux setup failed: %d\n", ret);
-		return;
-	}
-
-	/* configure the CFGCHIP3 register for RMII or MII */
-	__raw_writel(val, cfg_chip3_base);
-
-	soc_info->emac_pdata->phy_id = MITYOMAPL138_PHY_ID;
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warn("emac registration failed: %d\n", ret);
-}
-
-static void __init mityomapl138_init(void)
-{
-	int ret;
-
-	da850_register_clocks();
-
-	/* for now, no special EDMA channels are reserved */
-	ret = da850_register_edma(NULL);
-	if (ret)
-		pr_warn("edma registration failed: %d\n", ret);
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warn("watchdog registration failed: %d\n", ret);
-
-	davinci_serial_init(da8xx_serial_device);
-
-	nvmem_register_notifier(&mityomapl138_nvmem_notifier);
-	nvmem_add_cell_table(&mityomapl138_nvmem_cell_table);
-	nvmem_add_cell_lookups(&mityomapl138_nvmem_cell_lookup, 1);
-
-	ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
-	if (ret)
-		pr_warn("i2c0 registration failed: %d\n", ret);
-
-	ret = pmic_tps65023_init();
-	if (ret)
-		pr_warn("TPS65023 PMIC init failed: %d\n", ret);
-
-	mityomapl138_setup_nand();
-
-	ret = spi_register_board_info(mityomapl138_spi_flash_info,
-				      ARRAY_SIZE(mityomapl138_spi_flash_info));
-	if (ret)
-		pr_warn("spi info registration failed: %d\n", ret);
-
-	ret = da8xx_register_spi_bus(1,
-				     ARRAY_SIZE(mityomapl138_spi_flash_info));
-	if (ret)
-		pr_warn("spi 1 registration failed: %d\n", ret);
-
-	mityomapl138_config_emac();
-
-	ret = da8xx_register_rtc();
-	if (ret)
-		pr_warn("rtc setup failed: %d\n", ret);
-
-	ret = da8xx_register_cpuidle();
-	if (ret)
-		pr_warn("cpuidle registration failed: %d\n", ret);
-
-	davinci_pm_init();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init mityomapl138_console_init(void)
-{
-	if (!machine_is_mityomapl138())
-		return 0;
-
-	return add_preferred_console("ttyS", 1, "115200");
-}
-console_initcall(mityomapl138_console_init);
-#endif
-
-static void __init mityomapl138_map_io(void)
-{
-	da850_init();
-}
-
-MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
-	.atag_offset	= 0x100,
-	.map_io		= mityomapl138_map_io,
-	.init_irq	= da850_init_irq,
-	.init_time	= da850_init_time,
-	.init_machine	= mityomapl138_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
deleted file mode 100644
index b4843f68bb57..000000000000
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Neuros Technologies OSD2 board support
- *
- * Modified from original 644X-EVM board support.
- * 2008 (c) Neuros Technology, LLC.
- * 2009 (c) Jorge Luis Zapata Muga <jorgeluis.zapata@gmail.com>
- * 2009 (c) Andrey A. Porodko <Andrey.Porodko@gmail.com>
- *
- * The Neuros OSD 2.0 is the hardware component of the Neuros Open
- * Internet Television Platform. Hardware is very close to TI
- * DM644X-EVM board. It has:
- * 	DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
- * 	USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
- * 	Additionally realtime clock, IR remote control receiver,
- * 	IR Blaster based on MSP430 (firmware although is different
- * 	from used in DM644X-EVM), internal ATA-6 3.5” HDD drive
- * 	with PATA interface, two muxed red-green leds.
- *
- * For more information please refer to
- * 		http://wiki.neurostechnology.com/index.php/OSD_2.0_HD
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/serial.h>
-#include <mach/mux.h>
-
-#include "davinci.h"
-
-#define NEUROS_OSD2_PHY_ID		"davinci_mdio-0:01"
-#define LXT971_PHY_ID			0x001378e2
-#define LXT971_PHY_MASK			0xfffffff0
-
-#define	NTOSD2_AUDIOSOC_I2C_ADDR	0x18
-#define	NTOSD2_MSP430_I2C_ADDR		0x59
-#define	NTOSD2_MSP430_IRQ		2
-
-/* Neuros OSD2 has a Samsung 256 MByte NAND flash (Dev ID of 0xAA,
- * 2048 blocks in the device, 64 pages per block, 2048 bytes per
- * page.
- */
-
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_ntosd2_nandflash_partition[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		/* Kernel */
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		/* File System */
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* A few blocks at end hold a flash Bad Block Table. */
-};
-
-static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
-	.core_chipsel	= 0,
-	.parts		= davinci_ntosd2_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits	= 1,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-};
-
-static struct resource davinci_ntosd2_nandflash_resource[] = {
-	{
-		.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_ntosd2_nandflash_device = {
-	.name		= "davinci_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &davinci_ntosd2_nandflash_data,
-	},
-	.num_resources	= ARRAY_SIZE(davinci_ntosd2_nandflash_resource),
-	.resource	= davinci_ntosd2_nandflash_resource,
-};
-
-static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device davinci_fb_device = {
-	.name		= "davincifb",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &davinci_fb_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources = 0,
-};
-
-static const struct gpio_led ntosd2_leds[] = {
-	{ .name = "led1_green", .gpio = 10, },
-	{ .name = "led1_red",   .gpio = 11, },
-	{ .name = "led2_green", .gpio = 12, },
-	{ .name = "led2_red",   .gpio = 13, },
-};
-
-static struct gpio_led_platform_data ntosd2_leds_data = {
-	.num_leds	= ARRAY_SIZE(ntosd2_leds),
-	.leds		= ntosd2_leds,
-};
-
-static struct platform_device ntosd2_leds_dev = {
-	.name = "leds-gpio",
-	.id   = -1,
-	.dev = {
-		.platform_data 		= &ntosd2_leds_data,
-	},
-};
-
-
-static struct platform_device *davinci_ntosd2_devices[] __initdata = {
-	&davinci_fb_device,
-	&ntosd2_leds_dev,
-};
-
-static void __init davinci_ntosd2_map_io(void)
-{
-	dm644x_init();
-}
-
-static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
-	.wires		= 4,
-};
-
-#define HAS_ATA		(IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
-			 IS_ENABLED(CONFIG_PATA_BK3710))
-
-#define HAS_NAND	IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
-
-static __init void davinci_ntosd2_init(void)
-{
-	int ret;
-	struct clk *aemif_clk;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	dm644x_register_clocks();
-
-	dm644x_init_devices();
-
-	ret = dm644x_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	aemif_clk = clk_get(NULL, "aemif");
-	clk_prepare_enable(aemif_clk);
-
-	if (HAS_ATA) {
-		if (HAS_NAND)
-			pr_warn("WARNING: both IDE and Flash are enabled, but they share AEMIF pins\n"
-				"\tDisable IDE for NAND/NOR support\n");
-		davinci_init_ide();
-	} else if (HAS_NAND) {
-		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
-		davinci_cfg_reg(DM644X_ATAEN_DISABLE);
-
-		/* only one device will be jumpered and detected */
-		if (HAS_NAND)
-			platform_device_register(
-					&davinci_ntosd2_nandflash_device);
-	}
-
-	platform_add_devices(davinci_ntosd2_devices,
-				ARRAY_SIZE(davinci_ntosd2_devices));
-
-	davinci_serial_init(dm644x_serial_device);
-	dm644x_init_asp();
-
-	soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;
-
-	davinci_setup_usb(1000, 8);
-	/*
-	 * Mux the pins to be GPIOs, VLYNQEN is already done at startup.
-	 * The AEAWx are five new AEAW pins that can be muxed by separately.
-	 * They are a bitmask for GPIO management. According TI
-	 * documentation (https://www.ti.com/lit/gpn/tms320dm6446) to employ
-	 * gpio(10,11,12,13) for leds any combination of bits works except
-	 * four last. So we are to reset all five.
-	 */
-	davinci_cfg_reg(DM644X_AEAW0);
-	davinci_cfg_reg(DM644X_AEAW1);
-	davinci_cfg_reg(DM644X_AEAW2);
-	davinci_cfg_reg(DM644X_AEAW3);
-	davinci_cfg_reg(DM644X_AEAW4);
-
-	davinci_setup_mmc(0, &davinci_ntosd2_mmc_config);
-}
-
-MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
-	/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
-	.atag_offset	= 0x100,
-	.map_io		 = davinci_ntosd2_map_io,
-	.init_irq	= dm644x_init_irq,
-	.init_time	= dm644x_init_time,
-	.init_machine = davinci_ntosd2_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
deleted file mode 100644
index 88df8011a4e6..000000000000
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ /dev/null
@@ -1,454 +0,0 @@
-/*
- * Hawkboard.org based on TI's OMAP-L138 Platform
- *
- * Initial code: Syed Mohammed Khasim
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of
- * any kind, whether express or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/da8xx.h>
-#include <mach/mux.h>
-
-#define HAWKBOARD_PHY_ID		"davinci_mdio-0:07"
-
-#define DA850_USB1_VBUS_PIN		GPIO_TO_PIN(2, 4)
-#define DA850_USB1_OC_PIN		GPIO_TO_PIN(6, 13)
-
-static short omapl138_hawk_mii_pins[] __initdata = {
-	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
-	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
-	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static __init void omapl138_hawk_config_emac(void)
-{
-	void __iomem *cfgchip3 = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
-	int ret;
-	u32 val;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	val = __raw_readl(cfgchip3);
-	val &= ~BIT(8);
-	ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins);
-	if (ret) {
-		pr_warn("%s: CPGMAC/MII mux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	/* configure the CFGCHIP3 register for MII */
-	__raw_writel(val, cfgchip3);
-	pr_info("EMAC: MII PHY configured\n");
-
-	soc_info->emac_pdata->phy_id = HAWKBOARD_PHY_ID;
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
-}
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM/Hawkboard,
- * hence they are being reserved for codecs on the DSP side.
- */
-static const s16 da850_dma0_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma0_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30, 50},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30, 90},
-	{-1, -1}
-};
-
-static struct edma_rsv_info da850_edma_cc0_rsv = {
-	.rsv_chans	= da850_dma0_rsv_chans,
-	.rsv_slots	= da850_dma0_rsv_slots,
-};
-
-static struct edma_rsv_info da850_edma_cc1_rsv = {
-	.rsv_chans	= da850_dma1_rsv_chans,
-	.rsv_slots	= da850_dma1_rsv_slots,
-};
-
-static struct edma_rsv_info *da850_edma_rsv[2] = {
-	&da850_edma_cc0_rsv,
-	&da850_edma_cc1_rsv,
-};
-
-static const short hawk_mmcsd0_pins[] = {
-	DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
-	DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
-	DA850_GPIO3_12, DA850_GPIO3_13,
-	-1
-};
-
-#define DA850_HAWK_MMCSD_CD_PIN		GPIO_TO_PIN(3, 12)
-#define DA850_HAWK_MMCSD_WP_PIN		GPIO_TO_PIN(3, 13)
-
-static struct gpiod_lookup_table mmc_gpios_table = {
-	.dev_id = "da830-mmc.0",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_CD_PIN, "cd",
-			    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_WP_PIN, "wp",
-			    GPIO_ACTIVE_LOW),
-	},
-};
-
-static struct davinci_mmc_config da850_mmc_config = {
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static __init void omapl138_hawk_mmc_init(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(hawk_mmcsd0_pins);
-	if (ret) {
-		pr_warn("%s: MMC/SD0 mux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	gpiod_add_lookup_table(&mmc_gpios_table);
-
-	ret = da8xx_register_mmcsd0(&da850_mmc_config);
-	if (ret) {
-		pr_warn("%s: MMC/SD0 registration failed: %d\n", __func__, ret);
-		goto mmc_setup_mmcsd_fail;
-	}
-
-	return;
-
-mmc_setup_mmcsd_fail:
-	gpiod_remove_lookup_table(&mmc_gpios_table);
-}
-
-static struct mtd_partition omapl138_hawk_nandflash_partition[] = {
-	{
-		.name		= "u-boot env",
-		.offset		= 0,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	 },
-	{
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "free space",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static struct davinci_aemif_timing omapl138_hawk_nandflash_timing = {
-	.wsetup		= 24,
-	.wstrobe	= 21,
-	.whold		= 14,
-	.rsetup		= 19,
-	.rstrobe	= 50,
-	.rhold		= 0,
-	.ta		= 20,
-};
-
-static struct davinci_nand_pdata omapl138_hawk_nandflash_data = {
-	.core_chipsel	= 1,
-	.parts		= omapl138_hawk_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(omapl138_hawk_nandflash_partition),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits	= 4,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.options	= NAND_BUSWIDTH_16,
-	.timing		= &omapl138_hawk_nandflash_timing,
-	.mask_chipsel	= 0,
-	.mask_ale	= 0,
-	.mask_cle	= 0,
-};
-
-static struct resource omapl138_hawk_nandflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + SZ_32M,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource omapl138_hawk_aemif_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct aemif_abus_data omapl138_hawk_aemif_abus_data[] = {
-	{
-		.cs	= 3,
-	}
-};
-
-static struct platform_device omapl138_hawk_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= -1,
-		.dev		= {
-			.platform_data	= &omapl138_hawk_nandflash_data,
-		},
-		.resource	= omapl138_hawk_nandflash_resource,
-		.num_resources	= ARRAY_SIZE(omapl138_hawk_nandflash_resource),
-	}
-};
-
-static struct aemif_platform_data omapl138_hawk_aemif_pdata = {
-	.cs_offset = 2,
-	.abus_data = omapl138_hawk_aemif_abus_data,
-	.num_abus_data = ARRAY_SIZE(omapl138_hawk_aemif_abus_data),
-	.sub_devices = omapl138_hawk_aemif_devices,
-	.num_sub_devices = ARRAY_SIZE(omapl138_hawk_aemif_devices),
-};
-
-static struct platform_device omapl138_hawk_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data	= &omapl138_hawk_aemif_pdata,
-	},
-	.resource	= omapl138_hawk_aemif_resource,
-	.num_resources	= ARRAY_SIZE(omapl138_hawk_aemif_resource),
-};
-
-static const short omapl138_hawk_nand_pins[] = {
-	DA850_EMA_WAIT_1, DA850_NEMA_OE, DA850_NEMA_WE, DA850_NEMA_CS_3,
-	DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
-	DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
-	DA850_EMA_D_8, DA850_EMA_D_9, DA850_EMA_D_10, DA850_EMA_D_11,
-	DA850_EMA_D_12, DA850_EMA_D_13, DA850_EMA_D_14, DA850_EMA_D_15,
-	DA850_EMA_A_1, DA850_EMA_A_2,
-	-1
-};
-
-static int omapl138_hawk_register_aemif(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(omapl138_hawk_nand_pins);
-	if (ret)
-		pr_warn("%s: NAND mux setup failed: %d\n", __func__, ret);
-
-	return platform_device_register(&omapl138_hawk_aemif_device);
-}
-
-static const short da850_hawk_usb11_pins[] = {
-	DA850_GPIO2_4, DA850_GPIO6_13,
-	-1
-};
-
-static struct regulator_consumer_supply hawk_usb_supplies[] = {
-	REGULATOR_SUPPLY("vbus", NULL),
-};
-
-static struct regulator_init_data hawk_usb_vbus_data = {
-	.consumer_supplies	= hawk_usb_supplies,
-	.num_consumer_supplies	= ARRAY_SIZE(hawk_usb_supplies),
-	.constraints    = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config hawk_usb_vbus = {
-	.supply_name		= "vbus",
-	.microvolts		= 3300000,
-	.init_data		= &hawk_usb_vbus_data,
-};
-
-static struct platform_device hawk_usb_vbus_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &hawk_usb_vbus,
-	},
-};
-
-static struct gpiod_lookup_table hawk_usb_oc_gpio_lookup = {
-	.dev_id		= "ohci-da8xx",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table hawk_usb_vbus_gpio_lookup = {
-	.dev_id		= "reg-fixed-voltage.0",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, NULL, 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table *hawk_usb_gpio_lookups[] = {
-	&hawk_usb_oc_gpio_lookup,
-	&hawk_usb_vbus_gpio_lookup,
-};
-
-static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = {
-	/* TPS2087 switch @ 5V */
-	.potpgt         = (3 + 1) / 2,  /* 3 ms max */
-};
-
-static __init void omapl138_hawk_usb_init(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(da850_hawk_usb11_pins);
-	if (ret) {
-		pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	ret = da8xx_register_usb_phy_clocks();
-	if (ret)
-		pr_warn("%s: USB PHY CLK registration failed: %d\n",
-			__func__, ret);
-
-	gpiod_add_lookup_tables(hawk_usb_gpio_lookups,
-				ARRAY_SIZE(hawk_usb_gpio_lookups));
-
-	ret = da8xx_register_usb_phy();
-	if (ret)
-		pr_warn("%s: USB PHY registration failed: %d\n",
-			__func__, ret);
-
-	ret = platform_device_register(&hawk_usb_vbus_device);
-	if (ret) {
-		pr_warn("%s: Unable to register the vbus supply\n", __func__);
-		return;
-	}
-
-	ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
-	if (ret)
-		pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
-
-	return;
-}
-
-static __init void omapl138_hawk_init(void)
-{
-	int ret;
-
-	da850_register_clocks();
-
-	ret = da850_register_gpio();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	davinci_serial_init(da8xx_serial_device);
-
-	omapl138_hawk_config_emac();
-
-	ret = da850_register_edma(da850_edma_rsv);
-	if (ret)
-		pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
-
-	omapl138_hawk_mmc_init();
-
-	omapl138_hawk_usb_init();
-
-	ret = omapl138_hawk_register_aemif();
-	if (ret)
-		pr_warn("%s: aemif registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warn("%s: watchdog registration failed: %d\n",
-			__func__, ret);
-
-	ret = da8xx_register_rproc();
-	if (ret)
-		pr_warn("%s: dsp/rproc registration failed: %d\n",
-			__func__, ret);
-
-	regulator_has_full_constraints();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init omapl138_hawk_console_init(void)
-{
-	if (!machine_is_omapl138_hawkboard())
-		return 0;
-
-	return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(omapl138_hawk_console_init);
-#endif
-
-static void __init omapl138_hawk_map_io(void)
-{
-	da850_init();
-}
-
-MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
-	.atag_offset	= 0x100,
-	.map_io		= omapl138_hawk_map_io,
-	.init_irq	= da850_init_irq,
-	.init_time	= da850_init_time,
-	.init_machine	= omapl138_hawk_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-	.reserve	= da8xx_rproc_reserve_cma,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
deleted file mode 100644
index 79b47958e992..000000000000
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Lyrtech SFFSDR board support.
- *
- * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- *
- * Based on DV-EVM platform, original copyright follows:
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/property.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include <mach/common.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <mach/serial.h>
-#include <mach/mux.h>
-#include <linux/platform_data/usb-davinci.h>
-
-#include "davinci.h"
-
-#define SFFSDR_PHY_ID		"davinci_mdio-0:01"
-static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
-	/* U-Boot Environment: Block 0
-	 * UBL:                Block 1
-	 * U-Boot:             Blocks 6-7 (256 kb)
-	 * Integrity Kernel:   Blocks 8-31 (3 Mb)
-	 * Integrity Data:     Blocks 100-END
-	 */
-	{
-		.name		= "Linux Kernel",
-		.offset		= 32 * SZ_128K,
-		.size		= 16 * SZ_128K, /* 2 Mb */
-		.mask_flags	= MTD_WRITEABLE, /* Force read-only */
-	},
-	{
-		.name		= "Linux ROOT",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 256 * SZ_128K, /* 32 Mb */
-		.mask_flags	= 0, /* R/W */
-	},
-};
-
-static struct flash_platform_data davinci_sffsdr_nandflash_data = {
-	.parts		= davinci_sffsdr_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(davinci_sffsdr_nandflash_partition),
-};
-
-static struct resource davinci_sffsdr_nandflash_resource[] = {
-	{
-		.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_sffsdr_nandflash_device = {
-	.name		= "davinci_nand", /* Name of driver */
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &davinci_sffsdr_nandflash_data,
-	},
-	.num_resources	= ARRAY_SIZE(davinci_sffsdr_nandflash_resource),
-	.resource	= davinci_sffsdr_nandflash_resource,
-};
-
-static const struct property_entry eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 32),
-	{ }
-};
-
-static struct i2c_board_info __initdata i2c_info[] =  {
-	{
-		I2C_BOARD_INFO("24c64", 0x50),
-		.properties = eeprom_properties,
-	},
-	/* Other I2C devices:
-	 * MSP430,  addr 0x23 (not used)
-	 * PCA9543, addr 0x70 (setup done by U-Boot)
-	 * ADS7828, addr 0x48 (ADC for voltage monitoring.)
-	 */
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 20 /* kHz */,
-	.bus_delay	= 100 /* usec */,
-};
-
-static void __init sffsdr_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-}
-
-static struct platform_device *davinci_sffsdr_devices[] __initdata = {
-	&davinci_sffsdr_nandflash_device,
-};
-
-static void __init davinci_sffsdr_map_io(void)
-{
-	dm644x_init();
-}
-
-static __init void davinci_sffsdr_init(void)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	dm644x_register_clocks();
-
-	dm644x_init_devices();
-
-	platform_add_devices(davinci_sffsdr_devices,
-			     ARRAY_SIZE(davinci_sffsdr_devices));
-	sffsdr_init_i2c();
-	davinci_serial_init(dm644x_serial_device);
-	soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID;
-	davinci_setup_usb(0, 0); /* We support only peripheral mode. */
-
-	/* mux VLYNQ pins */
-	davinci_cfg_reg(DM644X_VLYNQEN);
-	davinci_cfg_reg(DM644X_VLYNQWD);
-}
-
-MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
-	.atag_offset  = 0x100,
-	.map_io	      = davinci_sffsdr_map_io,
-	.init_irq     = dm644x_init_irq,
-	.init_time	= dm644x_init_time,
-	.init_machine = davinci_sffsdr_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index ae61d19f9b3a..c1ce6b2a8d48 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -1,12 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Code commons to all DaVinci SoCs.
  *
  * Author: Mark A. Greer <mgreer@mvista.com>
  *
- * 2009 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2009 (c) MontaVista Software, Inc.
  */
 #include <linux/module.h>
 #include <linux/io.h>
@@ -17,8 +15,8 @@
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 
-#include <mach/common.h>
-#include <mach/cputype.h>
+#include "common.h"
+#include "cputype.h"
 
 struct davinci_soc_info davinci_soc_info;
 EXPORT_SYMBOL(davinci_soc_info);
diff --git a/arch/arm/mach-davinci/common.h b/arch/arm/mach-davinci/common.h
new file mode 100644
index 000000000000..b4fd0e9acf6c
--- /dev/null
+++ b/arch/arm/mach-davinci/common.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Header for code common to all DaVinci machines.
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc.
+ */
+
+#ifndef __ARCH_ARM_MACH_DAVINCI_COMMON_H
+#define __ARCH_ARM_MACH_DAVINCI_COMMON_H
+
+#include <linux/clk.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/reboot.h>
+
+#include <asm/irq.h>
+
+#define DAVINCI_INTC_START             NR_IRQS
+#define DAVINCI_INTC_IRQ(_irqnum)      (DAVINCI_INTC_START + (_irqnum))
+
+struct davinci_gpio_controller;
+
+/*
+ * SoC info passed into common davinci modules.
+ *
+ * Base addresses in this structure should be physical and not virtual.
+ * Modules that take such base addresses, should internally ioremap() them to
+ * use.
+ */
+struct davinci_soc_info {
+	struct map_desc			*io_desc;
+	unsigned long			io_desc_num;
+	u32				cpu_id;
+	u32				jtag_id;
+	u32				jtag_id_reg;
+	struct davinci_id		*ids;
+	unsigned long			ids_num;
+	u32				pinmux_base;
+	const struct mux_config		*pinmux_pins;
+	unsigned long			pinmux_pins_num;
+	int				gpio_type;
+	u32				gpio_base;
+	unsigned			gpio_num;
+	unsigned			gpio_irq;
+	unsigned			gpio_unbanked;
+	dma_addr_t			sram_dma;
+	unsigned			sram_len;
+};
+
+extern struct davinci_soc_info davinci_soc_info;
+
+extern void davinci_common_init(const struct davinci_soc_info *soc_info);
+extern void davinci_init_ide(void);
+void davinci_init_late(void);
+
+#ifdef CONFIG_CPU_FREQ
+int davinci_cpufreq_init(void);
+#else
+static inline int davinci_cpufreq_init(void) { return 0; }
+#endif
+
+#ifdef CONFIG_SUSPEND
+int davinci_pm_init(void);
+#else
+static inline int davinci_pm_init(void) { return 0; }
+#endif
+
+void __init pdata_quirks_init(void);
+
+#define SRAM_SIZE	SZ_128K
+
+#endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index dd38785536d5..78a1575c387d 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -44,8 +44,8 @@ static void davinci_save_ddr_power(int enter, bool pdown)
 }
 
 /* Actual code that puts the SoC in different idle states */
-static int davinci_enter_idle(struct cpuidle_device *dev,
-			      struct cpuidle_driver *drv, int index)
+static __cpuidle int davinci_enter_idle(struct cpuidle_device *dev,
+					struct cpuidle_driver *drv, int index)
 {
 	davinci_save_ddr_power(1, ddr2_pdown);
 	cpu_do_idle();
diff --git a/arch/arm/mach-davinci/cpuidle.h b/arch/arm/mach-davinci/cpuidle.h
index 0d9193aefab5..976d43073597 100644
--- a/arch/arm/mach-davinci/cpuidle.h
+++ b/arch/arm/mach-davinci/cpuidle.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * TI DaVinci cpuidle platform support
  *
  * 2009 (C) Texas Instruments, Inc. https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 #ifndef _MACH_DAVINCI_CPUIDLE_H
 #define _MACH_DAVINCI_CPUIDLE_H
diff --git a/arch/arm/mach-davinci/cputype.h b/arch/arm/mach-davinci/cputype.h
new file mode 100644
index 000000000000..148a738391dc
--- /dev/null
+++ b/arch/arm/mach-davinci/cputype.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * DaVinci CPU type detection
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * Defines the cpu_is_*() macros for runtime detection of DaVinci
+ * device type.  In addition, if support for a given device is not
+ * compiled in to the kernel, the macros return 0 so that
+ * resulting code can be optimized out.
+ *
+ * 2009 (c) Deep Root Systems, LLC.
+ */
+#ifndef _ASM_ARCH_CPU_H
+#define _ASM_ARCH_CPU_H
+
+#include "common.h"
+
+struct davinci_id {
+	u8	variant;	/* JTAG ID bits 31:28 */
+	u16	part_no;	/* JTAG ID bits 27:12 */
+	u16	manufacturer;	/* JTAG ID bits 11:1 */
+	u32	cpu_id;
+	char	*name;
+};
+
+/* Can use lower 16 bits of cpu id  for a variant when required */
+#define	DAVINCI_CPU_ID_DA830		0x08300000
+#define	DAVINCI_CPU_ID_DA850		0x08500000
+
+#endif
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 018ab4b549f1..2e497745b624 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -1,12 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI DA830/OMAP L137 chip specific setup
  *
  * Author: Mark A. Greer <mgreer@mvista.com>
  *
- * 2009 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2009 (c) MontaVista Software, Inc.
  */
 #include <linux/clk-provider.h>
 #include <linux/clk/davinci.h>
@@ -14,16 +12,14 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irqchip/irq-davinci-cp-intc.h>
-#include <linux/platform_data/gpio-davinci.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/da8xx.h>
 
 #include <clocksource/timer-davinci.h>
 
+#include <asm/mach/map.h>
+
+#include "common.h"
+#include "cputype.h"
+#include "da8xx.h"
 #include "irqs.h"
 #include "mux.h"
 
@@ -451,181 +447,6 @@ static const struct mux_config da830_pins[] = {
 #endif
 };
 
-const short da830_emif25_pins[] __initconst = {
-	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
-	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
-	DA830_EMA_D_8, DA830_EMA_D_9, DA830_EMA_D_10, DA830_EMA_D_11,
-	DA830_EMA_D_12, DA830_EMA_D_13, DA830_EMA_D_14, DA830_EMA_D_15,
-	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
-	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
-	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
-	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_EMA_CLK,
-	DA830_EMA_SDCKE, DA830_NEMA_CS_4, DA830_NEMA_CS_5, DA830_NEMA_WE,
-	DA830_NEMA_CS_0, DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE,
-	DA830_NEMA_WE_DQM_1, DA830_NEMA_WE_DQM_0, DA830_EMA_WAIT_0,
-	-1
-};
-
-const short da830_spi0_pins[] __initconst = {
-	DA830_SPI0_SOMI_0, DA830_SPI0_SIMO_0, DA830_SPI0_CLK, DA830_NSPI0_ENA,
-	DA830_NSPI0_SCS_0,
-	-1
-};
-
-const short da830_spi1_pins[] __initconst = {
-	DA830_SPI1_SOMI_0, DA830_SPI1_SIMO_0, DA830_SPI1_CLK, DA830_NSPI1_ENA,
-	DA830_NSPI1_SCS_0,
-	-1
-};
-
-const short da830_mmc_sd_pins[] __initconst = {
-	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
-	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
-	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
-	DA830_MMCSD_CMD,
-	-1
-};
-
-const short da830_uart0_pins[] __initconst = {
-	DA830_NUART0_CTS, DA830_NUART0_RTS, DA830_UART0_RXD, DA830_UART0_TXD,
-	-1
-};
-
-const short da830_uart1_pins[] __initconst = {
-	DA830_UART1_RXD, DA830_UART1_TXD,
-	-1
-};
-
-const short da830_uart2_pins[] __initconst = {
-	DA830_UART2_RXD, DA830_UART2_TXD,
-	-1
-};
-
-const short da830_usb20_pins[] __initconst = {
-	DA830_USB0_DRVVBUS, DA830_USB_REFCLKIN,
-	-1
-};
-
-const short da830_usb11_pins[] __initconst = {
-	DA830_USB_REFCLKIN,
-	-1
-};
-
-const short da830_uhpi_pins[] __initconst = {
-	DA830_UHPI_HD_0, DA830_UHPI_HD_1, DA830_UHPI_HD_2, DA830_UHPI_HD_3,
-	DA830_UHPI_HD_4, DA830_UHPI_HD_5, DA830_UHPI_HD_6, DA830_UHPI_HD_7,
-	DA830_UHPI_HD_8, DA830_UHPI_HD_9, DA830_UHPI_HD_10, DA830_UHPI_HD_11,
-	DA830_UHPI_HD_12, DA830_UHPI_HD_13, DA830_UHPI_HD_14, DA830_UHPI_HD_15,
-	DA830_UHPI_HCNTL0, DA830_UHPI_HCNTL1, DA830_UHPI_HHWIL, DA830_UHPI_HRNW,
-	DA830_NUHPI_HAS, DA830_NUHPI_HCS, DA830_NUHPI_HDS1, DA830_NUHPI_HDS2,
-	DA830_NUHPI_HINT, DA830_NUHPI_HRDY,
-	-1
-};
-
-const short da830_cpgmac_pins[] __initconst = {
-	DA830_RMII_TXD_0, DA830_RMII_TXD_1, DA830_RMII_TXEN, DA830_RMII_CRS_DV,
-	DA830_RMII_RXD_0, DA830_RMII_RXD_1, DA830_RMII_RXER, DA830_MDIO_CLK,
-	DA830_MDIO_D,
-	-1
-};
-
-const short da830_emif3c_pins[] __initconst = {
-	DA830_EMB_SDCKE, DA830_EMB_CLK_GLUE, DA830_EMB_CLK, DA830_NEMB_CS_0,
-	DA830_NEMB_CAS, DA830_NEMB_RAS, DA830_NEMB_WE, DA830_EMB_BA_1,
-	DA830_EMB_BA_0, DA830_EMB_A_0, DA830_EMB_A_1, DA830_EMB_A_2,
-	DA830_EMB_A_3, DA830_EMB_A_4, DA830_EMB_A_5, DA830_EMB_A_6,
-	DA830_EMB_A_7, DA830_EMB_A_8, DA830_EMB_A_9, DA830_EMB_A_10,
-	DA830_EMB_A_11, DA830_EMB_A_12, DA830_NEMB_WE_DQM_3,
-	DA830_NEMB_WE_DQM_2, DA830_EMB_D_0, DA830_EMB_D_1, DA830_EMB_D_2,
-	DA830_EMB_D_3, DA830_EMB_D_4, DA830_EMB_D_5, DA830_EMB_D_6,
-	DA830_EMB_D_7, DA830_EMB_D_8, DA830_EMB_D_9, DA830_EMB_D_10,
-	DA830_EMB_D_11, DA830_EMB_D_12, DA830_EMB_D_13, DA830_EMB_D_14,
-	DA830_EMB_D_15, DA830_EMB_D_16, DA830_EMB_D_17, DA830_EMB_D_18,
-	DA830_EMB_D_19, DA830_EMB_D_20, DA830_EMB_D_21, DA830_EMB_D_22,
-	DA830_EMB_D_23, DA830_EMB_D_24, DA830_EMB_D_25, DA830_EMB_D_26,
-	DA830_EMB_D_27, DA830_EMB_D_28, DA830_EMB_D_29, DA830_EMB_D_30,
-	DA830_EMB_D_31, DA830_NEMB_WE_DQM_1, DA830_NEMB_WE_DQM_0,
-	-1
-};
-
-const short da830_mcasp0_pins[] __initconst = {
-	DA830_AHCLKX0, DA830_ACLKX0, DA830_AFSX0,
-	DA830_AHCLKR0, DA830_ACLKR0, DA830_AFSR0, DA830_AMUTE0,
-	DA830_AXR0_0, DA830_AXR0_1, DA830_AXR0_2, DA830_AXR0_3,
-	DA830_AXR0_4, DA830_AXR0_5, DA830_AXR0_6, DA830_AXR0_7,
-	DA830_AXR0_8, DA830_AXR0_9, DA830_AXR0_10, DA830_AXR0_11,
-	DA830_AXR0_12, DA830_AXR0_13, DA830_AXR0_14, DA830_AXR0_15,
-	-1
-};
-
-const short da830_mcasp1_pins[] __initconst = {
-	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1,
-	DA830_AHCLKR1, DA830_ACLKR1, DA830_AFSR1, DA830_AMUTE1,
-	DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_3,
-	DA830_AXR1_4, DA830_AXR1_5, DA830_AXR1_6, DA830_AXR1_7,
-	DA830_AXR1_8, DA830_AXR1_9, DA830_AXR1_10, DA830_AXR1_11,
-	-1
-};
-
-const short da830_mcasp2_pins[] __initconst = {
-	DA830_AHCLKX2, DA830_ACLKX2, DA830_AFSX2,
-	DA830_AHCLKR2, DA830_ACLKR2, DA830_AFSR2, DA830_AMUTE2,
-	DA830_AXR2_0, DA830_AXR2_1, DA830_AXR2_2, DA830_AXR2_3,
-	-1
-};
-
-const short da830_i2c0_pins[] __initconst = {
-	DA830_I2C0_SDA, DA830_I2C0_SCL,
-	-1
-};
-
-const short da830_i2c1_pins[] __initconst = {
-	DA830_I2C1_SCL, DA830_I2C1_SDA,
-	-1
-};
-
-const short da830_lcdcntl_pins[] __initconst = {
-	DA830_LCD_D_0, DA830_LCD_D_1, DA830_LCD_D_2, DA830_LCD_D_3,
-	DA830_LCD_D_4, DA830_LCD_D_5, DA830_LCD_D_6, DA830_LCD_D_7,
-	DA830_LCD_D_8, DA830_LCD_D_9, DA830_LCD_D_10, DA830_LCD_D_11,
-	DA830_LCD_D_12, DA830_LCD_D_13, DA830_LCD_D_14, DA830_LCD_D_15,
-	DA830_LCD_PCLK, DA830_LCD_HSYNC, DA830_LCD_VSYNC, DA830_NLCD_AC_ENB_CS,
-	DA830_LCD_MCLK,
-	-1
-};
-
-const short da830_pwm_pins[] __initconst = {
-	DA830_ECAP0_APWM0, DA830_ECAP1_APWM1, DA830_EPWM0B, DA830_EPWM0A,
-	DA830_EPWMSYNCI, DA830_EPWMSYNC0, DA830_ECAP2_APWM2, DA830_EHRPWMGLUETZ,
-	DA830_EPWM2B, DA830_EPWM2A, DA830_EPWM1B, DA830_EPWM1A,
-	-1
-};
-
-const short da830_ecap0_pins[] __initconst = {
-	DA830_ECAP0_APWM0,
-	-1
-};
-
-const short da830_ecap1_pins[] __initconst = {
-	DA830_ECAP1_APWM1,
-	-1
-};
-
-const short da830_ecap2_pins[] __initconst = {
-	DA830_ECAP2_APWM2,
-	-1
-};
-
-const short da830_eqep0_pins[] __initconst = {
-	DA830_EQEP0I, DA830_EQEP0S, DA830_EQEP0A, DA830_EQEP0B,
-	-1
-};
-
-const short da830_eqep1_pins[] __initconst = {
-	DA830_EQEP1I, DA830_EQEP1S, DA830_EQEP1A, DA830_EQEP1B,
-	-1
-};
-
 static struct map_desc da830_io_desc[] = {
 	{
 		.virtual	= IO_VIRT,
@@ -666,30 +487,6 @@ static struct davinci_id da830_ids[] = {
 	},
 };
 
-static struct davinci_gpio_platform_data da830_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 128,
-};
-
-int __init da830_register_gpio(void)
-{
-	return da8xx_register_gpio(&da830_gpio_platform_data);
-}
-
-/*
- * Bottom half of timer0 is used both for clock even and clocksource.
- * Top half is used by DSP.
- */
-static const struct davinci_timer_cfg da830_timer_cfg = {
-	.reg = DEFINE_RES_IO(DA8XX_TIMER64P0_BASE, SZ_4K),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_DA830_T12CMPINT0_0)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT12_0)),
-	},
-	.cmp_off = DA830_CMP12_0,
-};
-
 static const struct davinci_soc_info davinci_soc_info_da830 = {
 	.io_desc		= da830_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da830_io_desc),
@@ -699,7 +496,6 @@ static const struct davinci_soc_info davinci_soc_info_da830 = {
 	.pinmux_base		= DA8XX_SYSCFG0_BASE + 0x120,
 	.pinmux_pins		= da830_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(da830_pins),
-	.emac_pdata		= &da8xx_emac_pdata,
 };
 
 void __init da830_init(void)
@@ -709,76 +505,3 @@ void __init da830_init(void)
 	da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
 	WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
 }
-
-static const struct davinci_cp_intc_config da830_cp_intc_config = {
-	.reg = {
-		.start		= DA8XX_CP_INTC_BASE,
-		.end		= DA8XX_CP_INTC_BASE + SZ_8K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= DA830_N_CP_INTC_IRQ,
-};
-
-void __init da830_init_irq(void)
-{
-	davinci_cp_intc_init(&da830_cp_intc_config);
-}
-
-void __init da830_init_time(void)
-{
-	void __iomem *pll;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA830_REF_FREQ);
-
-	pll = ioremap(DA8XX_PLL0_BASE, SZ_4K);
-
-	da830_pll_init(NULL, pll, NULL);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &da830_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource da830_psc0_resources[] = {
-	{
-		.start	= DA8XX_PSC0_BASE,
-		.end	= DA8XX_PSC0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da830_psc0_device = {
-	.name		= "da830-psc0",
-	.id		= -1,
-	.resource	= da830_psc0_resources,
-	.num_resources	= ARRAY_SIZE(da830_psc0_resources),
-};
-
-static struct resource da830_psc1_resources[] = {
-	{
-		.start	= DA8XX_PSC1_BASE,
-		.end	= DA8XX_PSC1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da830_psc1_device = {
-	.name		= "da830-psc1",
-	.id		= -1,
-	.resource	= da830_psc1_resources,
-	.num_resources	= ARRAY_SIZE(da830_psc1_resources),
-};
-
-void __init da830_register_clocks(void)
-{
-	/* PLL is registered in da830_init_time() */
-	platform_device_register(&da830_psc0_device);
-	platform_device_register(&da830_psc1_device);
-}
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 68156e7239a6..287dd987908e 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI DA850/OMAP-L138 chip specific setup
  *
@@ -6,38 +7,25 @@
  * Derived from: arch/arm/mach-davinci/da830.c
  * Original Copyrights follow:
  *
- * 2009 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2009 (c) MontaVista Software, Inc.
  */
 
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/cpufreq.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/irqchip/irq-davinci-cp-intc.h>
 #include <linux/mfd/da8xx-cfgchip.h>
-#include <linux/platform_data/clk-da8xx-cfgchip.h>
-#include <linux/platform_data/clk-davinci-pll.h>
-#include <linux/platform_data/davinci-cpufreq.h>
-#include <linux/platform_data/gpio-davinci.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
+#include <clocksource/timer-davinci.h>
 
 #include <asm/mach/map.h>
 
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/da8xx.h>
-#include <mach/pm.h>
-
-#include <clocksource/timer-davinci.h>
-
+#include "common.h"
+#include "cputype.h"
+#include "da8xx.h"
+#include "hardware.h"
+#include "pm.h"
 #include "irqs.h"
 #include "mux.h"
 
@@ -262,45 +250,6 @@ static const struct mux_config da850_pins[] = {
 #endif
 };
 
-const short da850_i2c0_pins[] __initconst = {
-	DA850_I2C0_SDA, DA850_I2C0_SCL,
-	-1
-};
-
-const short da850_i2c1_pins[] __initconst = {
-	DA850_I2C1_SCL, DA850_I2C1_SDA,
-	-1
-};
-
-const short da850_lcdcntl_pins[] __initconst = {
-	DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3,
-	DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7,
-	DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11,
-	DA850_LCD_D_12, DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15,
-	DA850_LCD_PCLK, DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS,
-	-1
-};
-
-const short da850_vpif_capture_pins[] __initconst = {
-	DA850_VPIF_DIN0, DA850_VPIF_DIN1, DA850_VPIF_DIN2, DA850_VPIF_DIN3,
-	DA850_VPIF_DIN4, DA850_VPIF_DIN5, DA850_VPIF_DIN6, DA850_VPIF_DIN7,
-	DA850_VPIF_DIN8, DA850_VPIF_DIN9, DA850_VPIF_DIN10, DA850_VPIF_DIN11,
-	DA850_VPIF_DIN12, DA850_VPIF_DIN13, DA850_VPIF_DIN14, DA850_VPIF_DIN15,
-	DA850_VPIF_CLKIN0, DA850_VPIF_CLKIN1, DA850_VPIF_CLKIN2,
-	DA850_VPIF_CLKIN3,
-	-1
-};
-
-const short da850_vpif_display_pins[] __initconst = {
-	DA850_VPIF_DOUT0, DA850_VPIF_DOUT1, DA850_VPIF_DOUT2, DA850_VPIF_DOUT3,
-	DA850_VPIF_DOUT4, DA850_VPIF_DOUT5, DA850_VPIF_DOUT6, DA850_VPIF_DOUT7,
-	DA850_VPIF_DOUT8, DA850_VPIF_DOUT9, DA850_VPIF_DOUT10,
-	DA850_VPIF_DOUT11, DA850_VPIF_DOUT12, DA850_VPIF_DOUT13,
-	DA850_VPIF_DOUT14, DA850_VPIF_DOUT15, DA850_VPIF_CLKO2,
-	DA850_VPIF_CLKO3,
-	-1
-};
-
 static struct map_desc da850_io_desc[] = {
 	{
 		.virtual	= IO_VIRT,
@@ -334,204 +283,9 @@ static struct davinci_id da850_ids[] = {
 	},
 };
 
-/*
- * Bottom half of timer 0 is used for clock_event, top half for
- * clocksource.
- */
-static const struct davinci_timer_cfg da850_timer_cfg = {
-	.reg = DEFINE_RES_IO(DA8XX_TIMER64P0_BASE, SZ_4K),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT12_0)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT34_0)),
-	},
-};
-
-#ifdef CONFIG_CPU_FREQ
-/*
- * Notes:
- * According to the TRM, minimum PLLM results in maximum power savings.
- * The OPP definitions below should keep the PLLM as low as possible.
- *
- * The output of the PLLM must be between 300 to 600 MHz.
- */
-struct da850_opp {
-	unsigned int	freq;	/* in KHz */
-	unsigned int	prediv;
-	unsigned int	mult;
-	unsigned int	postdiv;
-	unsigned int	cvdd_min; /* in uV */
-	unsigned int	cvdd_max; /* in uV */
-};
-
-static const struct da850_opp da850_opp_456 = {
-	.freq		= 456000,
-	.prediv		= 1,
-	.mult		= 19,
-	.postdiv	= 1,
-	.cvdd_min	= 1300000,
-	.cvdd_max	= 1350000,
-};
-
-static const struct da850_opp da850_opp_408 = {
-	.freq		= 408000,
-	.prediv		= 1,
-	.mult		= 17,
-	.postdiv	= 1,
-	.cvdd_min	= 1300000,
-	.cvdd_max	= 1350000,
-};
-
-static const struct da850_opp da850_opp_372 = {
-	.freq		= 372000,
-	.prediv		= 2,
-	.mult		= 31,
-	.postdiv	= 1,
-	.cvdd_min	= 1200000,
-	.cvdd_max	= 1320000,
-};
-
-static const struct da850_opp da850_opp_300 = {
-	.freq		= 300000,
-	.prediv		= 1,
-	.mult		= 25,
-	.postdiv	= 2,
-	.cvdd_min	= 1200000,
-	.cvdd_max	= 1320000,
-};
-
-static const struct da850_opp da850_opp_200 = {
-	.freq		= 200000,
-	.prediv		= 1,
-	.mult		= 25,
-	.postdiv	= 3,
-	.cvdd_min	= 1100000,
-	.cvdd_max	= 1160000,
-};
-
-static const struct da850_opp da850_opp_96 = {
-	.freq		= 96000,
-	.prediv		= 1,
-	.mult		= 20,
-	.postdiv	= 5,
-	.cvdd_min	= 1000000,
-	.cvdd_max	= 1050000,
-};
-
-#define OPP(freq) 		\
-	{				\
-		.driver_data = (unsigned int) &da850_opp_##freq,	\
-		.frequency = freq * 1000, \
-	}
-
-static struct cpufreq_frequency_table da850_freq_table[] = {
-	OPP(456),
-	OPP(408),
-	OPP(372),
-	OPP(300),
-	OPP(200),
-	OPP(96),
-	{
-		.driver_data		= 0,
-		.frequency	= CPUFREQ_TABLE_END,
-	},
-};
-
-#ifdef CONFIG_REGULATOR
-static int da850_set_voltage(unsigned int index);
-static int da850_regulator_init(void);
-#endif
-
-static struct davinci_cpufreq_config cpufreq_info = {
-	.freq_table = da850_freq_table,
-#ifdef CONFIG_REGULATOR
-	.init = da850_regulator_init,
-	.set_voltage = da850_set_voltage,
-#endif
-};
-
-#ifdef CONFIG_REGULATOR
-static struct regulator *cvdd;
-
-static int da850_set_voltage(unsigned int index)
-{
-	struct da850_opp *opp;
-
-	if (!cvdd)
-		return -ENODEV;
-
-	opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data;
-
-	return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max);
-}
-
-static int da850_regulator_init(void)
-{
-	cvdd = regulator_get(NULL, "cvdd");
-	if (WARN(IS_ERR(cvdd), "Unable to obtain voltage regulator for CVDD;"
-					" voltage scaling unsupported\n")) {
-		return PTR_ERR(cvdd);
-	}
-
-	return 0;
-}
-#endif
-
-static struct platform_device da850_cpufreq_device = {
-	.name			= "cpufreq-davinci",
-	.dev = {
-		.platform_data	= &cpufreq_info,
-	},
-	.id = -1,
-};
-
-unsigned int da850_max_speed = 300000;
-
-int da850_register_cpufreq(char *async_clk)
-{
-	int i;
-
-	/* cpufreq driver can help keep an "async" clock constant */
-	if (async_clk)
-		clk_add_alias("async", da850_cpufreq_device.name,
-							async_clk, NULL);
-	for (i = 0; i < ARRAY_SIZE(da850_freq_table); i++) {
-		if (da850_freq_table[i].frequency <= da850_max_speed) {
-			cpufreq_info.freq_table = &da850_freq_table[i];
-			break;
-		}
-	}
-
-	return platform_device_register(&da850_cpufreq_device);
-}
-#else
-int __init da850_register_cpufreq(char *async_clk)
-{
-	return 0;
-}
-#endif
-
 /* VPIF resource, platform data */
 static u64 da850_vpif_dma_mask = DMA_BIT_MASK(32);
 
-static struct resource da850_vpif_resource[] = {
-	{
-		.start = DA8XX_VPIF_BASE,
-		.end   = DA8XX_VPIF_BASE + 0xfff,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device da850_vpif_dev = {
-	.name		= "vpif",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &da850_vpif_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= da850_vpif_resource,
-	.num_resources	= ARRAY_SIZE(da850_vpif_resource),
-};
-
 static struct resource da850_vpif_display_resource[] = {
 	{
 		.start = DAVINCI_INTC_IRQ(IRQ_DA850_VPIFINT),
@@ -575,11 +329,6 @@ static struct platform_device da850_vpif_capture_dev = {
 	.num_resources  = ARRAY_SIZE(da850_vpif_capture_resource),
 };
 
-int __init da850_register_vpif(void)
-{
-	return platform_device_register(&da850_vpif_dev);
-}
-
 int __init da850_register_vpif_display(struct vpif_display_config
 						*display_config)
 {
@@ -594,17 +343,6 @@ int __init da850_register_vpif_capture(struct vpif_capture_config
 	return platform_device_register(&da850_vpif_capture_dev);
 }
 
-static struct davinci_gpio_platform_data da850_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 144,
-};
-
-int __init da850_register_gpio(void)
-{
-	return da8xx_register_gpio(&da850_gpio_platform_data);
-}
-
 static const struct davinci_soc_info davinci_soc_info_da850 = {
 	.io_desc		= da850_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
@@ -614,7 +352,6 @@ static const struct davinci_soc_info davinci_soc_info_da850 = {
 	.pinmux_base		= DA8XX_SYSCFG0_BASE + 0x120,
 	.pinmux_pins		= da850_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(da850_pins),
-	.emac_pdata		= &da8xx_emac_pdata,
 	.sram_dma		= DA8XX_SHARED_RAM_BASE,
 	.sram_len		= SZ_128K,
 };
@@ -630,142 +367,3 @@ void __init da850_init(void)
 	da8xx_syscfg1_base = ioremap(DA8XX_SYSCFG1_BASE, SZ_4K);
 	WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module");
 }
-
-static const struct davinci_cp_intc_config da850_cp_intc_config = {
-	.reg = {
-		.start		= DA8XX_CP_INTC_BASE,
-		.end		= DA8XX_CP_INTC_BASE + SZ_8K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= DA850_N_CP_INTC_IRQ,
-};
-
-void __init da850_init_irq(void)
-{
-	davinci_cp_intc_init(&da850_cp_intc_config);
-}
-
-void __init da850_init_time(void)
-{
-	void __iomem *pll0;
-	struct regmap *cfgchip;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA850_REF_FREQ);
-
-	pll0 = ioremap(DA8XX_PLL0_BASE, SZ_4K);
-	cfgchip = da8xx_get_cfgchip();
-
-	da850_pll0_init(NULL, pll0, cfgchip);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &da850_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource da850_pll1_resources[] = {
-	{
-		.start	= DA850_PLL1_BASE,
-		.end	= DA850_PLL1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct davinci_pll_platform_data da850_pll1_pdata;
-
-static struct platform_device da850_pll1_device = {
-	.name		= "da850-pll1",
-	.id		= -1,
-	.resource	= da850_pll1_resources,
-	.num_resources	= ARRAY_SIZE(da850_pll1_resources),
-	.dev		= {
-		.platform_data	= &da850_pll1_pdata,
-	},
-};
-
-static struct resource da850_psc0_resources[] = {
-	{
-		.start	= DA8XX_PSC0_BASE,
-		.end	= DA8XX_PSC0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da850_psc0_device = {
-	.name		= "da850-psc0",
-	.id		= -1,
-	.resource	= da850_psc0_resources,
-	.num_resources	= ARRAY_SIZE(da850_psc0_resources),
-};
-
-static struct resource da850_psc1_resources[] = {
-	{
-		.start	= DA8XX_PSC1_BASE,
-		.end	= DA8XX_PSC1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da850_psc1_device = {
-	.name		= "da850-psc1",
-	.id		= -1,
-	.resource	= da850_psc1_resources,
-	.num_resources	= ARRAY_SIZE(da850_psc1_resources),
-};
-
-static struct da8xx_cfgchip_clk_platform_data da850_async1_pdata;
-
-static struct platform_device da850_async1_clksrc_device = {
-	.name		= "da850-async1-clksrc",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &da850_async1_pdata,
-	},
-};
-
-static struct da8xx_cfgchip_clk_platform_data da850_async3_pdata;
-
-static struct platform_device da850_async3_clksrc_device = {
-	.name		= "da850-async3-clksrc",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &da850_async3_pdata,
-	},
-};
-
-static struct da8xx_cfgchip_clk_platform_data da850_tbclksync_pdata;
-
-static struct platform_device da850_tbclksync_device = {
-	.name		= "da830-tbclksync",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &da850_tbclksync_pdata,
-	},
-};
-
-void __init da850_register_clocks(void)
-{
-	/* PLL0 is registered in da850_init_time() */
-
-	da850_pll1_pdata.cfgchip = da8xx_get_cfgchip();
-	platform_device_register(&da850_pll1_device);
-
-	da850_async1_pdata.cfgchip = da8xx_get_cfgchip();
-	platform_device_register(&da850_async1_clksrc_device);
-
-	da850_async3_pdata.cfgchip = da8xx_get_cfgchip();
-	platform_device_register(&da850_async3_clksrc_device);
-
-	platform_device_register(&da850_psc0_device);
-
-	platform_device_register(&da850_psc1_device);
-
-	da850_tbclksync_pdata.cfgchip = da8xx_get_cfgchip();
-	platform_device_register(&da850_tbclksync_device);
-}
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 0cd2f30aeb9c..45763a9b37ee 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -7,8 +7,8 @@
 
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/da8xx.h>
+#include "common.h"
+#include "da8xx.h"
 
 #ifdef CONFIG_ARCH_DAVINCI_DA850
 
diff --git a/arch/arm/mach-davinci/da8xx.h b/arch/arm/mach-davinci/da8xx.h
new file mode 100644
index 000000000000..54a255b8d8d8
--- /dev/null
+++ b/arch/arm/mach-davinci/da8xx.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Chip specific defines for DA8XX/OMAP L1XX SoC
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2007, 2009-2010 (c) MontaVista Software, Inc.
+ */
+#ifndef __ASM_ARCH_DAVINCI_DA8XX_H
+#define __ASM_ARCH_DAVINCI_DA8XX_H
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/videodev2.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+#include "hardware.h"
+#include "pm.h"
+
+#include <media/davinci/vpif_types.h>
+
+extern void __iomem *da8xx_syscfg0_base;
+extern void __iomem *da8xx_syscfg1_base;
+
+/*
+ * The cp_intc interrupt controller for the da8xx isn't in the same
+ * chunk of physical memory space as the other registers (like it is
+ * on the davincis) so it needs to be mapped separately.  It will be
+ * mapped early on when the I/O space is mapped and we'll put it just
+ * before the I/O space in the processor's virtual memory space.
+ */
+#define DA8XX_CP_INTC_BASE	0xfffee000
+#define DA8XX_CP_INTC_SIZE	SZ_8K
+#define DA8XX_CP_INTC_VIRT	(IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
+
+#define DA8XX_SYSCFG0_BASE	(IO_PHYS + 0x14000)
+#define DA8XX_SYSCFG0_VIRT(x)	(da8xx_syscfg0_base + (x))
+#define DA8XX_JTAG_ID_REG	0x18
+#define DA8XX_HOST1CFG_REG	0x44
+#define DA8XX_CHIPSIG_REG	0x174
+#define DA8XX_CFGCHIP0_REG	0x17c
+#define DA8XX_CFGCHIP1_REG	0x180
+#define DA8XX_CFGCHIP2_REG	0x184
+#define DA8XX_CFGCHIP3_REG	0x188
+#define DA8XX_CFGCHIP4_REG	0x18c
+
+#define DA8XX_SYSCFG1_BASE	(IO_PHYS + 0x22C000)
+#define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
+#define DA8XX_DEEPSLEEP_REG	0x8
+#define DA8XX_PWRDN_REG		0x18
+
+#define DA8XX_PSC0_BASE		0x01c10000
+#define DA8XX_PLL0_BASE		0x01c11000
+#define DA8XX_TIMER64P0_BASE	0x01c20000
+#define DA8XX_TIMER64P1_BASE	0x01c21000
+#define DA8XX_VPIF_BASE		0x01e17000
+#define DA8XX_GPIO_BASE		0x01e26000
+#define DA8XX_PSC1_BASE		0x01e27000
+
+#define DA8XX_DSP_L2_RAM_BASE	0x11800000
+#define DA8XX_DSP_L1P_RAM_BASE	(DA8XX_DSP_L2_RAM_BASE + 0x600000)
+#define DA8XX_DSP_L1D_RAM_BASE	(DA8XX_DSP_L2_RAM_BASE + 0x700000)
+
+#define DA8XX_AEMIF_CS2_BASE	0x60000000
+#define DA8XX_AEMIF_CS3_BASE	0x62000000
+#define DA8XX_AEMIF_CTL_BASE	0x68000000
+#define DA8XX_SHARED_RAM_BASE	0x80000000
+#define DA8XX_ARM_RAM_BASE	0xffff0000
+
+void da830_init(void);
+
+void da850_init(void);
+
+int da850_register_vpif_display
+			(struct vpif_display_config *display_config);
+int da850_register_vpif_capture
+			(struct vpif_capture_config *capture_config);
+struct regmap *da8xx_get_cfgchip(void);
+void __iomem *da8xx_get_mem_ctlr(void);
+
+#endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
deleted file mode 100644
index 208d7a4d3597..000000000000
--- a/arch/arm/mach-davinci/davinci.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * This file contains the processor specific definitions
- * of the TI DM644x, DM355, DM365, and DM646x.
- *
- * Copyright (C) 2011 Texas Instruments Incorporated
- * Copyright (c) 2007 Deep Root Systems, LLC
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __DAVINCI_H
-#define __DAVINCI_H
-
-#include <linux/clk.h>
-#include <linux/videodev2.h>
-#include <linux/davinci_emac.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/platform_data/davinci_asp.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/keyscan-davinci.h>
-#include <mach/hardware.h>
-
-#include <media/davinci/vpfe_capture.h>
-#include <media/davinci/vpif_types.h>
-#include <media/davinci/vpss.h>
-#include <media/davinci/vpbe_types.h>
-#include <media/davinci/vpbe_venc.h>
-#include <media/davinci/vpbe.h>
-#include <media/davinci/vpbe_osd.h>
-
-#define DAVINCI_PLL1_BASE		0x01c40800
-#define DAVINCI_PLL2_BASE		0x01c40c00
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE	0x01c41000
-
-#define DAVINCI_SYSTEM_MODULE_BASE	0x01c40000
-#define SYSMOD_VDAC_CONFIG		0x2c
-#define SYSMOD_VIDCLKCTL		0x38
-#define SYSMOD_VPSS_CLKCTL		0x44
-#define SYSMOD_VDD3P3VPWDN		0x48
-#define SYSMOD_VSCLKDIS			0x6c
-#define SYSMOD_PUPDCTL1			0x7c
-
-/* VPSS CLKCTL bit definitions */
-#define VPSS_MUXSEL_EXTCLK_ENABLE	BIT(1)
-#define VPSS_VENCCLKEN_ENABLE		BIT(3)
-#define VPSS_DACCLKEN_ENABLE		BIT(4)
-#define VPSS_PLLC2SYSCLK5_ENABLE	BIT(5)
-
-extern void __iomem *davinci_sysmod_base;
-#define DAVINCI_SYSMOD_VIRT(x)	(davinci_sysmod_base + (x))
-void davinci_map_sysmod(void);
-
-#define DAVINCI_GPIO_BASE 0x01C67000
-int davinci_gpio_register(struct resource *res, int size, void *pdata);
-
-#define DAVINCI_TIMER0_BASE		(IO_PHYS + 0x21400)
-#define DAVINCI_WDOG_BASE		(IO_PHYS + 0x21C00)
-
-/* DM355 base addresses */
-#define DM355_ASYNC_EMIF_CONTROL_BASE	0x01e10000
-#define DM355_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
-
-#define ASP1_TX_EVT_EN	1
-#define ASP1_RX_EVT_EN	2
-
-/* DM365 base addresses */
-#define DM365_ASYNC_EMIF_CONTROL_BASE	0x01d10000
-#define DM365_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
-#define DM365_ASYNC_EMIF_DATA_CE1_BASE	0x04000000
-
-/* DM644x base addresses */
-#define DM644X_ASYNC_EMIF_CONTROL_BASE	0x01e00000
-#define DM644X_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
-#define DM644X_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
-#define DM644X_ASYNC_EMIF_DATA_CE2_BASE 0x06000000
-#define DM644X_ASYNC_EMIF_DATA_CE3_BASE 0x08000000
-
-/* DM646x base addresses */
-#define DM646X_ASYNC_EMIF_CONTROL_BASE	0x20008000
-#define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000
-
-int davinci_init_wdt(void);
-
-/* DM355 function declarations */
-void dm355_init(void);
-void dm355_init_time(void);
-void dm355_init_irq(void);
-void dm355_register_clocks(void);
-void dm355_init_spi0(unsigned chipselect_mask,
-		const struct spi_board_info *info, unsigned len);
-void dm355_init_asp1(u32 evt_enable);
-int dm355_init_video(struct vpfe_config *, struct vpbe_config *);
-int dm355_gpio_register(void);
-
-/* DM365 function declarations */
-void dm365_init(void);
-void dm365_init_irq(void);
-void dm365_init_time(void);
-void dm365_register_clocks(void);
-void dm365_init_asp(void);
-void dm365_init_vc(void);
-void dm365_init_ks(struct davinci_ks_platform_data *pdata);
-void dm365_init_rtc(void);
-void dm365_init_spi0(unsigned chipselect_mask,
-			const struct spi_board_info *info, unsigned len);
-int dm365_init_video(struct vpfe_config *, struct vpbe_config *);
-int dm365_gpio_register(void);
-
-/* DM644x function declarations */
-void dm644x_init(void);
-void dm644x_init_irq(void);
-void dm644x_init_devices(void);
-void dm644x_init_time(void);
-void dm644x_register_clocks(void);
-void dm644x_init_asp(void);
-int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
-int dm644x_gpio_register(void);
-
-/* DM646x function declarations */
-void dm646x_init(void);
-void dm646x_init_irq(void);
-void dm646x_init_time(unsigned long ref_clk_rate, unsigned long aux_clkin_rate);
-void dm646x_register_clocks(void);
-void dm646x_init_mcasp0(struct snd_platform_data *pdata);
-void dm646x_init_mcasp1(struct snd_platform_data *pdata);
-int dm646x_init_edma(struct edma_rsv_info *rsv);
-void dm646x_video_init(void);
-void dm646x_setup_vpif(struct vpif_display_config *,
-		       struct vpif_capture_config *);
-int dm646x_gpio_register(void);
-
-extern struct platform_device dm365_serial_device[];
-extern struct platform_device dm355_serial_device[];
-extern struct platform_device dm644x_serial_device[];
-extern struct platform_device dm646x_serial_device[];
-#endif /*__DAVINCI_H */
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index bb368938fc49..6939166c33c2 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -18,11 +18,9 @@
 #include <linux/reboot.h>
 #include <linux/serial_8250.h>
 
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/da8xx.h>
-
-#include "asp.h"
+#include "common.h"
+#include "cputype.h"
+#include "da8xx.h"
 #include "cpuidle.h"
 #include "irqs.h"
 #include "sram.h"
@@ -58,911 +56,6 @@
 void __iomem *da8xx_syscfg0_base;
 void __iomem *da8xx_syscfg1_base;
 
-static struct plat_serial8250_port da8xx_serial0_pdata[] = {
-	{
-		.mapbase	= DA8XX_UART0_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_DA8XX_UARTINT0),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port da8xx_serial1_pdata[] = {
-	{
-		.mapbase	= DA8XX_UART1_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_DA8XX_UARTINT1),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port da8xx_serial2_pdata[] = {
-	{
-		.mapbase	= DA8XX_UART2_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_DA8XX_UARTINT2),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-
-struct platform_device da8xx_serial_device[] = {
-	{
-		.name	= "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM,
-		.dev	= {
-			.platform_data	= da8xx_serial0_pdata,
-		}
-	},
-	{
-		.name	= "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM1,
-		.dev	= {
-			.platform_data	= da8xx_serial1_pdata,
-		}
-	},
-	{
-		.name	= "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM2,
-		.dev	= {
-			.platform_data	= da8xx_serial2_pdata,
-		}
-	},
-	{
-	}
-};
-
-static s8 da8xx_queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{1, 7},
-	{-1, -1}
-};
-
-static s8 da850_queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{-1, -1}
-};
-
-static struct edma_soc_info da8xx_edma0_pdata = {
-	.queue_priority_mapping	= da8xx_queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
-};
-
-static struct edma_soc_info da850_edma1_pdata = {
-	.queue_priority_mapping	= da850_queue_priority_mapping,
-	.default_queue		= EVENTQ_0,
-};
-
-static struct resource da8xx_edma0_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= DA8XX_TPCC_BASE,
-		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= DA8XX_TPTC0_BASE,
-		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc1",
-		.start	= DA8XX_TPTC1_BASE,
-		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_CCINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_CCERRINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource da850_edma1_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= DA850_TPCC1_BASE,
-		.end	= DA850_TPCC1_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= DA850_TPTC2_BASE,
-		.end	= DA850_TPTC2_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA850_CCINT1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA850_CCERRINT1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct platform_device_info da8xx_edma0_device __initconst = {
-	.name		= "edma",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= da8xx_edma0_resources,
-	.num_res	= ARRAY_SIZE(da8xx_edma0_resources),
-	.data		= &da8xx_edma0_pdata,
-	.size_data	= sizeof(da8xx_edma0_pdata),
-};
-
-static const struct platform_device_info da850_edma1_device __initconst = {
-	.name		= "edma",
-	.id		= 1,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= da850_edma1_resources,
-	.num_res	= ARRAY_SIZE(da850_edma1_resources),
-	.data		= &da850_edma1_pdata,
-	.size_data	= sizeof(da850_edma1_pdata),
-};
-
-static const struct dma_slave_map da830_edma_map[] = {
-	{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) },
-	{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) },
-	{ "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) },
-	{ "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) },
-	{ "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) },
-	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) },
-	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) },
-	{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) },
-	{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) },
-	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) },
-	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) },
-};
-
-int __init da830_register_edma(struct edma_rsv_info *rsv)
-{
-	struct platform_device *edma_pdev;
-
-	da8xx_edma0_pdata.rsv = rsv;
-
-	da8xx_edma0_pdata.slave_map = da830_edma_map;
-	da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map);
-
-	edma_pdev = platform_device_register_full(&da8xx_edma0_device);
-	return PTR_ERR_OR_ZERO(edma_pdev);
-}
-
-static const struct dma_slave_map da850_edma0_map[] = {
-	{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) },
-	{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) },
-	{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 3) },
-	{ "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 4) },
-	{ "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 5) },
-	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) },
-	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) },
-	{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) },
-	{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) },
-	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) },
-	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) },
-};
-
-static const struct dma_slave_map da850_edma1_map[] = {
-	{ "da830-mmc.1", "rx", EDMA_FILTER_PARAM(1, 28) },
-	{ "da830-mmc.1", "tx", EDMA_FILTER_PARAM(1, 29) },
-};
-
-int __init da850_register_edma(struct edma_rsv_info *rsv[2])
-{
-	struct platform_device *edma_pdev;
-
-	if (rsv) {
-		da8xx_edma0_pdata.rsv = rsv[0];
-		da850_edma1_pdata.rsv = rsv[1];
-	}
-
-	da8xx_edma0_pdata.slave_map = da850_edma0_map;
-	da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da850_edma0_map);
-
-	edma_pdev = platform_device_register_full(&da8xx_edma0_device);
-	if (IS_ERR(edma_pdev)) {
-		pr_warn("%s: Failed to register eDMA0\n", __func__);
-		return PTR_ERR(edma_pdev);
-	}
-
-	da850_edma1_pdata.slave_map = da850_edma1_map;
-	da850_edma1_pdata.slavecnt = ARRAY_SIZE(da850_edma1_map);
-
-	edma_pdev = platform_device_register_full(&da850_edma1_device);
-	return PTR_ERR_OR_ZERO(edma_pdev);
-}
-
-static struct resource da8xx_i2c_resources0[] = {
-	{
-		.start	= DA8XX_I2C0_BASE,
-		.end	= DA8XX_I2C0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_I2CINT0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_I2CINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_i2c_device0 = {
-	.name		= "i2c_davinci",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(da8xx_i2c_resources0),
-	.resource	= da8xx_i2c_resources0,
-};
-
-static struct resource da8xx_i2c_resources1[] = {
-	{
-		.start	= DA8XX_I2C1_BASE,
-		.end	= DA8XX_I2C1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_I2CINT1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_I2CINT1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_i2c_device1 = {
-	.name		= "i2c_davinci",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(da8xx_i2c_resources1),
-	.resource	= da8xx_i2c_resources1,
-};
-
-int __init da8xx_register_i2c(int instance,
-		struct davinci_i2c_platform_data *pdata)
-{
-	struct platform_device *pdev;
-
-	if (instance == 0)
-		pdev = &da8xx_i2c_device0;
-	else if (instance == 1)
-		pdev = &da8xx_i2c_device1;
-	else
-		return -EINVAL;
-
-	pdev->dev.platform_data = pdata;
-	return platform_device_register(pdev);
-}
-
-static struct resource da8xx_watchdog_resources[] = {
-	{
-		.start	= DA8XX_WDOG_BASE,
-		.end	= DA8XX_WDOG_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da8xx_wdt_device = {
-	.name		= "davinci-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(da8xx_watchdog_resources),
-	.resource	= da8xx_watchdog_resources,
-};
-
-int __init da8xx_register_watchdog(void)
-{
-	return platform_device_register(&da8xx_wdt_device);
-}
-
-static struct resource da8xx_emac_resources[] = {
-	{
-		.start	= DA8XX_EMAC_CPPI_PORT_BASE,
-		.end	= DA8XX_EMAC_CPPI_PORT_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_RX_THRESH_PULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_RX_THRESH_PULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_RX_PULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_RX_PULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_TX_PULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_TX_PULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_MISC_PULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_MISC_PULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct emac_platform_data da8xx_emac_pdata = {
-	.ctrl_reg_offset	= DA8XX_EMAC_CTRL_REG_OFFSET,
-	.ctrl_mod_reg_offset	= DA8XX_EMAC_MOD_REG_OFFSET,
-	.ctrl_ram_offset	= DA8XX_EMAC_RAM_OFFSET,
-	.ctrl_ram_size		= DA8XX_EMAC_CTRL_RAM_SIZE,
-	.version		= EMAC_VERSION_2,
-};
-
-static struct platform_device da8xx_emac_device = {
-	.name		= "davinci_emac",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &da8xx_emac_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(da8xx_emac_resources),
-	.resource	= da8xx_emac_resources,
-};
-
-static struct resource da8xx_mdio_resources[] = {
-	{
-		.start	= DA8XX_EMAC_MDIO_BASE,
-		.end	= DA8XX_EMAC_MDIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da8xx_mdio_device = {
-	.name		= "davinci_mdio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(da8xx_mdio_resources),
-	.resource	= da8xx_mdio_resources,
-};
-
-int __init da8xx_register_emac(void)
-{
-	int ret;
-
-	ret = platform_device_register(&da8xx_mdio_device);
-	if (ret < 0)
-		return ret;
-
-	return platform_device_register(&da8xx_emac_device);
-}
-
-static struct resource da830_mcasp1_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_DA830_MCASP1_REG_BASE,
-		.end	= DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* TX event */
-	{
-		.name	= "tx",
-		.start	= DAVINCI_DA830_DMA_MCASP1_AXEVT,
-		.end	= DAVINCI_DA830_DMA_MCASP1_AXEVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	/* RX event */
-	{
-		.name	= "rx",
-		.start	= DAVINCI_DA830_DMA_MCASP1_AREVT,
-		.end	= DAVINCI_DA830_DMA_MCASP1_AREVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.name	= "common",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_MCASPINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da830_mcasp1_device = {
-	.name		= "davinci-mcasp",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(da830_mcasp1_resources),
-	.resource	= da830_mcasp1_resources,
-};
-
-static struct resource da830_mcasp2_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_DA830_MCASP2_REG_BASE,
-		.end	= DAVINCI_DA830_MCASP2_REG_BASE + (SZ_1K * 12) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* TX event */
-	{
-		.name	= "tx",
-		.start	= DAVINCI_DA830_DMA_MCASP2_AXEVT,
-		.end	= DAVINCI_DA830_DMA_MCASP2_AXEVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	/* RX event */
-	{
-		.name	= "rx",
-		.start	= DAVINCI_DA830_DMA_MCASP2_AREVT,
-		.end	= DAVINCI_DA830_DMA_MCASP2_AREVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.name	= "common",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_MCASPINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da830_mcasp2_device = {
-	.name		= "davinci-mcasp",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(da830_mcasp2_resources),
-	.resource	= da830_mcasp2_resources,
-};
-
-static struct resource da850_mcasp_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_DA8XX_MCASP0_REG_BASE,
-		.end	= DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* TX event */
-	{
-		.name	= "tx",
-		.start	= DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
-		.end	= DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	/* RX event */
-	{
-		.name	= "rx",
-		.start	= DAVINCI_DA8XX_DMA_MCASP0_AREVT,
-		.end	= DAVINCI_DA8XX_DMA_MCASP0_AREVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.name	= "common",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_MCASPINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da850_mcasp_device = {
-	.name		= "davinci-mcasp",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(da850_mcasp_resources),
-	.resource	= da850_mcasp_resources,
-};
-
-void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
-{
-	struct platform_device *pdev;
-
-	switch (id) {
-	case 0:
-		/* Valid for DA830/OMAP-L137 or DA850/OMAP-L138 */
-		pdev = &da850_mcasp_device;
-		break;
-	case 1:
-		/* Valid for DA830/OMAP-L137 only */
-		if (!cpu_is_davinci_da830())
-			return;
-		pdev = &da830_mcasp1_device;
-		break;
-	case 2:
-		/* Valid for DA830/OMAP-L137 only */
-		if (!cpu_is_davinci_da830())
-			return;
-		pdev = &da830_mcasp2_device;
-		break;
-	default:
-		return;
-	}
-
-	pdev->dev.platform_data = pdata;
-	platform_device_register(pdev);
-}
-
-static struct resource da8xx_pruss_resources[] = {
-	{
-		.start	= DA8XX_PRUSS_MEM_BASE,
-		.end	= DA8XX_PRUSS_MEM_BASE + 0xFFFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT2),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT3),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT3),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT4),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT4),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT5),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT5),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT6),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT6),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT7),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT7),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct uio_pruss_pdata da8xx_uio_pruss_pdata = {
-	.pintc_base	= 0x4000,
-};
-
-static struct platform_device da8xx_uio_pruss_dev = {
-	.name		= "pruss_uio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(da8xx_pruss_resources),
-	.resource	= da8xx_pruss_resources,
-	.dev		= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &da8xx_uio_pruss_pdata,
-	}
-};
-
-int __init da8xx_register_uio_pruss(void)
-{
-	da8xx_uio_pruss_pdata.sram_pool = sram_get_gen_pool();
-	return platform_device_register(&da8xx_uio_pruss_dev);
-}
-
-static struct lcd_ctrl_config lcd_cfg = {
-	.panel_shade		= COLOR_ACTIVE,
-	.bpp			= 16,
-};
-
-struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata = {
-	.manu_name		= "sharp",
-	.controller_data	= &lcd_cfg,
-	.type			= "Sharp_LCD035Q3DG01",
-};
-
-struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata = {
-	.manu_name		= "sharp",
-	.controller_data	= &lcd_cfg,
-	.type			= "Sharp_LK043T1DG01",
-};
-
-static struct resource da8xx_lcdc_resources[] = {
-	[0] = { /* registers */
-		.start  = DA8XX_LCD_CNTRL_BASE,
-		.end    = DA8XX_LCD_CNTRL_BASE + SZ_4K - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = { /* interrupt */
-		.start  = DAVINCI_INTC_IRQ(IRQ_DA8XX_LCDINT),
-		.end    = DAVINCI_INTC_IRQ(IRQ_DA8XX_LCDINT),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_lcdc_device = {
-	.name		= "da8xx_lcdc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(da8xx_lcdc_resources),
-	.resource	= da8xx_lcdc_resources,
-	.dev		= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata)
-{
-	da8xx_lcdc_device.dev.platform_data = pdata;
-	return platform_device_register(&da8xx_lcdc_device);
-}
-
-static struct resource da8xx_gpio_resources[] = {
-	{ /* registers */
-		.start	= DA8XX_GPIO_BASE,
-		.end	= DA8XX_GPIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{ /* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO2),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO3),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO3),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO4),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO4),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO5),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO5),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO6),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO6),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO7),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO7),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO8),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO8),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_gpio_device = {
-	.name		= "davinci_gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(da8xx_gpio_resources),
-	.resource	= da8xx_gpio_resources,
-};
-
-int __init da8xx_register_gpio(void *pdata)
-{
-	da8xx_gpio_device.dev.platform_data = pdata;
-	return platform_device_register(&da8xx_gpio_device);
-}
-
-static struct resource da8xx_mmcsd0_resources[] = {
-	{		/* registers */
-		.start	= DA8XX_MMCSD0_BASE,
-		.end	= DA8XX_MMCSD0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{		/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_MMCSDINT0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_MMCSDINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_mmcsd0_device = {
-	.name		= "da830-mmc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(da8xx_mmcsd0_resources),
-	.resource	= da8xx_mmcsd0_resources,
-};
-
-int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config)
-{
-	da8xx_mmcsd0_device.dev.platform_data = config;
-	return platform_device_register(&da8xx_mmcsd0_device);
-}
-
-#ifdef CONFIG_ARCH_DAVINCI_DA850
-static struct resource da850_mmcsd1_resources[] = {
-	{		/* registers */
-		.start	= DA850_MMCSD1_BASE,
-		.end	= DA850_MMCSD1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{		/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA850_MMCSDINT0_1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA850_MMCSDINT0_1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da850_mmcsd1_device = {
-	.name		= "da830-mmc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(da850_mmcsd1_resources),
-	.resource	= da850_mmcsd1_resources,
-};
-
-int __init da850_register_mmcsd1(struct davinci_mmc_config *config)
-{
-	da850_mmcsd1_device.dev.platform_data = config;
-	return platform_device_register(&da850_mmcsd1_device);
-}
-#endif
-
-static struct resource da8xx_rproc_resources[] = {
-	{ /* DSP boot address */
-		.name		= "host1cfg",
-		.start		= DA8XX_SYSCFG0_BASE + DA8XX_HOST1CFG_REG,
-		.end		= DA8XX_SYSCFG0_BASE + DA8XX_HOST1CFG_REG + 3,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* DSP interrupt registers */
-		.name		= "chipsig",
-		.start		= DA8XX_SYSCFG0_BASE + DA8XX_CHIPSIG_REG,
-		.end		= DA8XX_SYSCFG0_BASE + DA8XX_CHIPSIG_REG + 7,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* DSP L2 RAM */
-		.name		= "l2sram",
-		.start		= DA8XX_DSP_L2_RAM_BASE,
-		.end		= DA8XX_DSP_L2_RAM_BASE + SZ_256K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* DSP L1P RAM */
-		.name		= "l1pram",
-		.start		= DA8XX_DSP_L1P_RAM_BASE,
-		.end		= DA8XX_DSP_L1P_RAM_BASE + SZ_32K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* DSP L1D RAM */
-		.name		= "l1dram",
-		.start		= DA8XX_DSP_L1D_RAM_BASE,
-		.end		= DA8XX_DSP_L1D_RAM_BASE + SZ_32K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* dsp irq */
-		.start		= DAVINCI_INTC_IRQ(IRQ_DA8XX_CHIPINT0),
-		.end		= DAVINCI_INTC_IRQ(IRQ_DA8XX_CHIPINT0),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_dsp = {
-	.name	= "davinci-rproc",
-	.dev	= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(da8xx_rproc_resources),
-	.resource	= da8xx_rproc_resources,
-};
-
-static bool rproc_mem_inited __initdata;
-
-#if IS_ENABLED(CONFIG_DA8XX_REMOTEPROC)
-
-static phys_addr_t rproc_base __initdata;
-static unsigned long rproc_size __initdata;
-
-static int __init early_rproc_mem(char *p)
-{
-	char *endp;
-
-	if (p == NULL)
-		return 0;
-
-	rproc_size = memparse(p, &endp);
-	if (*endp == '@')
-		rproc_base = memparse(endp + 1, NULL);
-
-	return 0;
-}
-early_param("rproc_mem", early_rproc_mem);
-
-void __init da8xx_rproc_reserve_cma(void)
-{
-	struct cma *cma;
-	int ret;
-
-	if (!rproc_base || !rproc_size) {
-		pr_err("%s: 'rproc_mem=nn@address' badly specified\n"
-		       "    'nn' and 'address' must both be non-zero\n",
-		       __func__);
-
-		return;
-	}
-
-	pr_info("%s: reserving 0x%lx @ 0x%lx...\n",
-		__func__, rproc_size, (unsigned long)rproc_base);
-
-	ret = dma_contiguous_reserve_area(rproc_size, rproc_base, 0, &cma,
-			true);
-	if (ret) {
-		pr_err("%s: dma_contiguous_reserve_area failed %d\n",
-			__func__, ret);
-		return;
-	}
-	da8xx_dsp.dev.cma_area = cma;
-	rproc_mem_inited = true;
-}
-#else
-
-void __init da8xx_rproc_reserve_cma(void)
-{
-}
-
-#endif
-
-int __init da8xx_register_rproc(void)
-{
-	int ret;
-
-	if (!rproc_mem_inited) {
-		pr_warn("%s: memory not reserved for DSP, not registering DSP device\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	ret = platform_device_register(&da8xx_dsp);
-	if (ret)
-		pr_err("%s: can't register DSP device: %d\n", __func__, ret);
-
-	return ret;
-};
-
-static struct resource da8xx_rtc_resources[] = {
-	{
-		.start		= DA8XX_RTC_BASE,
-		.end		= DA8XX_RTC_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* timer irq */
-		.start		= DAVINCI_INTC_IRQ(IRQ_DA8XX_RTC),
-		.end		= DAVINCI_INTC_IRQ(IRQ_DA8XX_RTC),
-		.flags		= IORESOURCE_IRQ,
-	},
-	{ /* alarm irq */
-		.start		= DAVINCI_INTC_IRQ(IRQ_DA8XX_RTC),
-		.end		= DAVINCI_INTC_IRQ(IRQ_DA8XX_RTC),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_rtc_device = {
-	.name           = "da830-rtc",
-	.id             = -1,
-	.num_resources	= ARRAY_SIZE(da8xx_rtc_resources),
-	.resource	= da8xx_rtc_resources,
-};
-
-int da8xx_register_rtc(void)
-{
-	return platform_device_register(&da8xx_rtc_device);
-}
-
 static void __iomem *da8xx_ddr2_ctlr_base;
 void __iomem * __init da8xx_get_mem_ctlr(void)
 {
@@ -975,192 +68,3 @@ void __iomem * __init da8xx_get_mem_ctlr(void)
 
 	return da8xx_ddr2_ctlr_base;
 }
-
-static struct resource da8xx_cpuidle_resources[] = {
-	{
-		.start		= DA8XX_DDR2_CTL_BASE,
-		.end		= DA8XX_DDR2_CTL_BASE + SZ_32K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-/* DA8XX devices support DDR2 power down */
-static struct davinci_cpuidle_config da8xx_cpuidle_pdata = {
-	.ddr2_pdown	= 1,
-};
-
-
-static struct platform_device da8xx_cpuidle_device = {
-	.name			= "cpuidle-davinci",
-	.num_resources		= ARRAY_SIZE(da8xx_cpuidle_resources),
-	.resource		= da8xx_cpuidle_resources,
-	.dev = {
-		.platform_data	= &da8xx_cpuidle_pdata,
-	},
-};
-
-int __init da8xx_register_cpuidle(void)
-{
-	da8xx_cpuidle_pdata.ddr2_ctlr_base = da8xx_get_mem_ctlr();
-
-	return platform_device_register(&da8xx_cpuidle_device);
-}
-
-static struct resource da8xx_spi0_resources[] = {
-	[0] = {
-		.start	= DA8XX_SPI0_BASE,
-		.end	= DA8XX_SPI0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_SPINT0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_SPINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource da8xx_spi1_resources[] = {
-	[0] = {
-		.start	= DA830_SPI1_BASE,
-		.end	= DA830_SPI1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_SPINT1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_SPINT1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_spi_platform_data da8xx_spi_pdata[] = {
-	[0] = {
-		.version	= SPI_VERSION_2,
-		.intr_line	= 1,
-		.dma_event_q	= EVENTQ_0,
-		.prescaler_limit = 2,
-	},
-	[1] = {
-		.version	= SPI_VERSION_2,
-		.intr_line	= 1,
-		.dma_event_q	= EVENTQ_0,
-		.prescaler_limit = 2,
-	},
-};
-
-static struct platform_device da8xx_spi_device[] = {
-	[0] = {
-		.name		= "spi_davinci",
-		.id		= 0,
-		.num_resources	= ARRAY_SIZE(da8xx_spi0_resources),
-		.resource	= da8xx_spi0_resources,
-		.dev		= {
-			.platform_data = &da8xx_spi_pdata[0],
-		},
-	},
-	[1] = {
-		.name		= "spi_davinci",
-		.id		= 1,
-		.num_resources	= ARRAY_SIZE(da8xx_spi1_resources),
-		.resource	= da8xx_spi1_resources,
-		.dev		= {
-			.platform_data = &da8xx_spi_pdata[1],
-		},
-	},
-};
-
-int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect)
-{
-	if (instance < 0 || instance > 1)
-		return -EINVAL;
-
-	da8xx_spi_pdata[instance].num_chipselect = num_chipselect;
-
-	if (instance == 1 && cpu_is_davinci_da850()) {
-		da8xx_spi1_resources[0].start = DA850_SPI1_BASE;
-		da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1;
-	}
-
-	return platform_device_register(&da8xx_spi_device[instance]);
-}
-
-#ifdef CONFIG_ARCH_DAVINCI_DA850
-int __init da850_register_sata_refclk(int rate)
-{
-	struct clk *clk;
-
-	clk = clk_register_fixed_rate(NULL, "sata_refclk", NULL, 0, rate);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
-
-	return clk_register_clkdev(clk, "refclk", "ahci_da850");
-}
-
-static struct resource da850_sata_resources[] = {
-	{
-		.start	= DA850_SATA_BASE,
-		.end	= DA850_SATA_BASE + 0x1fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG,
-		.end	= DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG + 0x3,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA850_SATAINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 da850_sata_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device da850_sata_device = {
-	.name	= "ahci_da850",
-	.id	= -1,
-	.dev	= {
-		.dma_mask		= &da850_sata_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(da850_sata_resources),
-	.resource	= da850_sata_resources,
-};
-
-int __init da850_register_sata(unsigned long refclkpn)
-{
-	int ret;
-
-	ret = da850_register_sata_refclk(refclkpn);
-	if (ret)
-		return ret;
-
-	return platform_device_register(&da850_sata_device);
-}
-#endif
-
-static struct regmap *da8xx_cfgchip;
-
-static const struct regmap_config da8xx_cfgchip_config __initconst = {
-	.name		= "cfgchip",
-	.reg_bits	= 32,
-	.val_bits	= 32,
-	.reg_stride	= 4,
-	.max_register	= DA8XX_CFGCHIP4_REG - DA8XX_CFGCHIP0_REG,
-};
-
-/**
- * da8xx_get_cfgchip - Lazy gets CFGCHIP as regmap
- *
- * This is for use on non-DT boards only. For DT boards, use
- * syscon_regmap_lookup_by_compatible("ti,da830-cfgchip")
- *
- * Returns: Pointer to the CFGCHIP regmap or negative error code.
- */
-struct regmap * __init da8xx_get_cfgchip(void)
-{
-	if (IS_ERR_OR_NULL(da8xx_cfgchip))
-		da8xx_cfgchip = regmap_init_mmio(NULL,
-					DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG),
-					&da8xx_cfgchip_config);
-
-	return da8xx_cfgchip;
-}
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
deleted file mode 100644
index 849e811fade7..000000000000
--- a/arch/arm/mach-davinci/devices.c
+++ /dev/null
@@ -1,304 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * mach-davinci/devices.c
- *
- * DaVinci platform device setup/initialization
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/edma.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-
-#include <mach/hardware.h>
-#include <mach/cputype.h>
-#include <mach/mux.h>
-
-#include "davinci.h"
-#include "irqs.h"
-
-#define DAVINCI_I2C_BASE	     0x01C21000
-#define DAVINCI_ATA_BASE	     0x01C66000
-#define DAVINCI_MMCSD0_BASE	     0x01E10000
-#define DM355_MMCSD0_BASE	     0x01E11000
-#define DM355_MMCSD1_BASE	     0x01E00000
-#define DM365_MMCSD0_BASE	     0x01D11000
-#define DM365_MMCSD1_BASE	     0x01D00000
-
-void __iomem  *davinci_sysmod_base;
-
-void davinci_map_sysmod(void)
-{
-	davinci_sysmod_base = ioremap(DAVINCI_SYSTEM_MODULE_BASE,
-					      0x800);
-	/*
-	 * Throw a bug since a lot of board initialization code depends
-	 * on system module availability. ioremap() failing this early
-	 * need careful looking into anyway.
-	 */
-	BUG_ON(!davinci_sysmod_base);
-}
-
-static struct resource i2c_resources[] = {
-	{
-		.start		= DAVINCI_I2C_BASE,
-		.end		= DAVINCI_I2C_BASE + 0x40,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= DAVINCI_INTC_IRQ(IRQ_I2C),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device davinci_i2c_device = {
-	.name           = "i2c_davinci",
-	.id             = 1,
-	.num_resources	= ARRAY_SIZE(i2c_resources),
-	.resource	= i2c_resources,
-};
-
-void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
-{
-	if (cpu_is_davinci_dm644x())
-		davinci_cfg_reg(DM644X_I2C);
-
-	davinci_i2c_device.dev.platform_data = pdata;
-	(void) platform_device_register(&davinci_i2c_device);
-}
-
-static struct resource ide_resources[] = {
-	{
-		.start		= DAVINCI_ATA_BASE,
-		.end		= DAVINCI_ATA_BASE + 0x7ff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= DAVINCI_INTC_IRQ(IRQ_IDE),
-		.end		= DAVINCI_INTC_IRQ(IRQ_IDE),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_device = {
-	.name           = "palm_bk3710",
-	.id             = -1,
-	.resource       = ide_resources,
-	.num_resources  = ARRAY_SIZE(ide_resources),
-	.dev = {
-		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
-void __init davinci_init_ide(void)
-{
-	if (cpu_is_davinci_dm644x()) {
-		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
-		davinci_cfg_reg(DM644X_ATAEN);
-		davinci_cfg_reg(DM644X_HDIREN);
-	} else if (cpu_is_davinci_dm646x()) {
-		/* IRQ_DM646X_IDE is the same as IRQ_IDE */
-		davinci_cfg_reg(DM646X_ATAEN);
-	} else {
-		WARN_ON(1);
-		return;
-	}
-
-	platform_device_register(&ide_device);
-}
-
-#if IS_ENABLED(CONFIG_MMC_DAVINCI)
-
-static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource mmcsd0_resources[] = {
-	{
-		/* different on dm355 */
-		.start = DAVINCI_MMCSD0_BASE,
-		.end   = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	/* IRQs:  MMC/SD, then SDIO */
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_MMCINT),
-		.flags = IORESOURCE_IRQ,
-	}, {
-		/* different on dm355 */
-		.start = DAVINCI_INTC_IRQ(IRQ_SDIOINT),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device davinci_mmcsd0_device = {
-	.name = "dm6441-mmc",
-	.id = 0,
-	.dev = {
-		.dma_mask = &mmcsd0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(mmcsd0_resources),
-	.resource = mmcsd0_resources,
-};
-
-static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource mmcsd1_resources[] = {
-	{
-		.start = DM355_MMCSD1_BASE,
-		.end   = DM355_MMCSD1_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	/* IRQs:  MMC/SD, then SDIO */
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM355_MMCINT1),
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = DAVINCI_INTC_IRQ(IRQ_DM355_SDIOINT1),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device davinci_mmcsd1_device = {
-	.name = "dm6441-mmc",
-	.id = 1,
-	.dev = {
-		.dma_mask = &mmcsd1_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(mmcsd1_resources),
-	.resource = mmcsd1_resources,
-};
-
-
-void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
-{
-	struct platform_device	*pdev = NULL;
-
-	if (WARN_ON(cpu_is_davinci_dm646x()))
-		return;
-
-	/* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
-	 * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
-	 *
-	 * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
-	 * not handled right here ...
-	 */
-	switch (module) {
-	case 1:
-		if (cpu_is_davinci_dm355()) {
-			/* REVISIT we may not need all these pins if e.g. this
-			 * is a hard-wired SDIO device...
-			 */
-			davinci_cfg_reg(DM355_SD1_CMD);
-			davinci_cfg_reg(DM355_SD1_CLK);
-			davinci_cfg_reg(DM355_SD1_DATA0);
-			davinci_cfg_reg(DM355_SD1_DATA1);
-			davinci_cfg_reg(DM355_SD1_DATA2);
-			davinci_cfg_reg(DM355_SD1_DATA3);
-		} else if (cpu_is_davinci_dm365()) {
-			/* Configure pull down control */
-			unsigned v;
-
-			v = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
-			__raw_writel(v & ~0xfc0,
-					DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
-
-			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
-			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
-							SZ_4K - 1;
-			mmcsd1_resources[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM365_SDIOINT1);
-			davinci_mmcsd1_device.name = "da830-mmc";
-		} else
-			break;
-
-		pdev = &davinci_mmcsd1_device;
-		break;
-	case 0:
-		if (cpu_is_davinci_dm355()) {
-			mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
-			mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
-			mmcsd0_resources[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM355_SDIOINT0);
-
-			/* expose all 6 MMC0 signals:  CLK, CMD, DATA[0..3] */
-			davinci_cfg_reg(DM355_MMCSD0);
-
-			/* enable RX EDMA */
-			davinci_cfg_reg(DM355_EVT26_MMC0_RX);
-		} else if (cpu_is_davinci_dm365()) {
-			mmcsd0_resources[0].start = DM365_MMCSD0_BASE;
-			mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
-							SZ_4K - 1;
-			mmcsd0_resources[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM365_SDIOINT0);
-			davinci_mmcsd0_device.name = "da830-mmc";
-		} else if (cpu_is_davinci_dm644x()) {
-			/* REVISIT: should this be in board-init code? */
-			/* Power-on 3.3V IO cells */
-			__raw_writel(0,
-				DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
-			/*Set up the pull regiter for MMC */
-			davinci_cfg_reg(DM644X_MSTK);
-		}
-
-		pdev = &davinci_mmcsd0_device;
-		break;
-	}
-
-	if (WARN_ON(!pdev))
-		return;
-
-	pdev->dev.platform_data = config;
-	platform_device_register(pdev);
-}
-
-#else
-
-void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
-{
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-static struct resource wdt_resources[] = {
-	{
-		.start	= DAVINCI_WDOG_BASE,
-		.end	= DAVINCI_WDOG_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_wdt_device = {
-	.name		= "davinci-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-	.resource	= wdt_resources,
-};
-
-int davinci_init_wdt(void)
-{
-	return platform_device_register(&davinci_wdt_device);
-}
-
-static struct platform_device davinci_gpio_device = {
-	.name	= "davinci_gpio",
-	.id	= -1,
-};
-
-int davinci_gpio_register(struct resource *res, int size, void *pdata)
-{
-	davinci_gpio_device.resource = res;
-	davinci_gpio_device.num_resources = size;
-	davinci_gpio_device.dev.platform_data = pdata;
-	return platform_device_register(&davinci_gpio_device);
-}
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
deleted file mode 100644
index 5de72d2fa8f0..000000000000
--- a/arch/arm/mach-davinci/dm355.c
+++ /dev/null
@@ -1,836 +0,0 @@
-/*
- * TI DaVinci DM355 chip specific setup
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-aintc.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/mux.h>
-#include <mach/serial.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include "asp.h"
-#include "davinci.h"
-#include "irqs.h"
-#include "mux.h"
-
-#define DM355_UART2_BASE	(IO_PHYS + 0x206000)
-#define DM355_OSD_BASE		(IO_PHYS + 0x70200)
-#define DM355_VENC_BASE		(IO_PHYS + 0x70400)
-
-/*
- * Device specific clocks
- */
-#define DM355_REF_FREQ		24000000	/* 24 or 36 MHz */
-
-static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource dm355_spi0_resources[] = {
-	{
-		.start = 0x01c66000,
-		.end   = 0x01c667ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM355_SPINT0_0),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_spi_platform_data dm355_spi0_pdata = {
-	.version 	= SPI_VERSION_1,
-	.num_chipselect = 2,
-	.cshold_bug	= true,
-	.dma_event_q	= EVENTQ_1,
-	.prescaler_limit = 1,
-};
-static struct platform_device dm355_spi0_device = {
-	.name = "spi_davinci",
-	.id = 0,
-	.dev = {
-		.dma_mask = &dm355_spi0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &dm355_spi0_pdata,
-	},
-	.num_resources = ARRAY_SIZE(dm355_spi0_resources),
-	.resource = dm355_spi0_resources,
-};
-
-void __init dm355_init_spi0(unsigned chipselect_mask,
-		const struct spi_board_info *info, unsigned len)
-{
-	/* for now, assume we need MISO */
-	davinci_cfg_reg(DM355_SPI0_SDI);
-
-	/* not all slaves will be wired up */
-	if (chipselect_mask & BIT(0))
-		davinci_cfg_reg(DM355_SPI0_SDENA0);
-	if (chipselect_mask & BIT(1))
-		davinci_cfg_reg(DM355_SPI0_SDENA1);
-
-	spi_register_board_info(info, len);
-
-	platform_device_register(&dm355_spi0_device);
-}
-
-/*----------------------------------------------------------------------*/
-
-#define INTMUX		0x18
-#define EVTMUX		0x1c
-
-/*
- * Device specific mux setup
- *
- *	soc	description	mux  mode   mode  mux	 dbg
- *				reg  offset mask  mode
- */
-static const struct mux_config dm355_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM355,	MMCSD0,		4,   2,     1,	  0,	 false)
-
-MUX_CFG(DM355,	SD1_CLK,	3,   6,     1,	  1,	 false)
-MUX_CFG(DM355,	SD1_CMD,	3,   7,     1,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA3,	3,   8,     3,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA2,	3,   10,    3,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA1,	3,   12,    3,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA0,	3,   14,    3,	  1,	 false)
-
-MUX_CFG(DM355,	I2C_SDA,	3,   19,    1,	  1,	 false)
-MUX_CFG(DM355,	I2C_SCL,	3,   20,    1,	  1,	 false)
-
-MUX_CFG(DM355,	MCBSP0_BDX,	3,   0,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_X,	3,   1,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_BFSX,	3,   2,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_BDR,	3,   3,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_R,	3,   4,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_BFSR,	3,   5,     1,	  1,	 false)
-
-MUX_CFG(DM355,	SPI0_SDI,	4,   1,     1,    0,	 false)
-MUX_CFG(DM355,	SPI0_SDENA0,	4,   0,     1,    0,	 false)
-MUX_CFG(DM355,	SPI0_SDENA1,	3,   28,    1,    1,	 false)
-
-INT_CFG(DM355,  INT_EDMA_CC,	      2,    1,    1,     false)
-INT_CFG(DM355,  INT_EDMA_TC0_ERR,     3,    1,    1,     false)
-INT_CFG(DM355,  INT_EDMA_TC1_ERR,     4,    1,    1,     false)
-
-EVT_CFG(DM355,  EVT8_ASP1_TX,	      0,    1,    0,     false)
-EVT_CFG(DM355,  EVT9_ASP1_RX,	      1,    1,    0,     false)
-EVT_CFG(DM355,  EVT26_MMC0_RX,	      2,    1,    0,     false)
-
-MUX_CFG(DM355,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
-MUX_CFG(DM355,	VOUT_FIELD_G70,	1,   18,    3,	  0,	 false)
-MUX_CFG(DM355,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
-MUX_CFG(DM355,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
-MUX_CFG(DM355,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
-
-MUX_CFG(DM355,	VIN_PCLK,	0,   14,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CAM_WEN,	0,   13,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CAM_VD,	0,   12,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CAM_HD,	0,   11,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_YIN_EN,	0,   10,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CINL_EN,	0,   0,   0xff, 0x55,	 false)
-MUX_CFG(DM355,	VIN_CINH_EN,	0,   8,     3,    3,	 false)
-#endif
-};
-
-static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_DM355_CCDC_VDINT0]		= 2,
-	[IRQ_DM355_CCDC_VDINT1]		= 6,
-	[IRQ_DM355_CCDC_VDINT2]		= 6,
-	[IRQ_DM355_IPIPE_HST]		= 6,
-	[IRQ_DM355_H3AINT]		= 6,
-	[IRQ_DM355_IPIPE_SDR]		= 6,
-	[IRQ_DM355_IPIPEIFINT]		= 6,
-	[IRQ_DM355_OSDINT]		= 7,
-	[IRQ_DM355_VENCINT]		= 6,
-	[IRQ_ASQINT]			= 6,
-	[IRQ_IMXINT]			= 6,
-	[IRQ_USBINT]			= 4,
-	[IRQ_DM355_RTOINT]		= 4,
-	[IRQ_DM355_UARTINT2]		= 7,
-	[IRQ_DM355_TINT6]		= 7,
-	[IRQ_CCINT0]			= 5,	/* dma */
-	[IRQ_CCERRINT]			= 5,	/* dma */
-	[IRQ_TCERRINT0]			= 5,	/* dma */
-	[IRQ_TCERRINT]			= 5,	/* dma */
-	[IRQ_DM355_SPINT2_1]		= 7,
-	[IRQ_DM355_TINT7]		= 4,
-	[IRQ_DM355_SDIOINT0]		= 7,
-	[IRQ_MBXINT]			= 7,
-	[IRQ_MBRINT]			= 7,
-	[IRQ_MMCINT]			= 7,
-	[IRQ_DM355_MMCINT1]		= 7,
-	[IRQ_DM355_PWMINT3]		= 7,
-	[IRQ_DDRINT]			= 7,
-	[IRQ_AEMIFINT]			= 7,
-	[IRQ_DM355_SDIOINT1]		= 4,
-	[IRQ_TINT0_TINT12]		= 2,	/* clockevent */
-	[IRQ_TINT0_TINT34]		= 2,	/* clocksource */
-	[IRQ_TINT1_TINT12]		= 7,	/* DSP timer */
-	[IRQ_TINT1_TINT34]		= 7,	/* system tick */
-	[IRQ_PWMINT0]			= 7,
-	[IRQ_PWMINT1]			= 7,
-	[IRQ_PWMINT2]			= 7,
-	[IRQ_I2C]			= 3,
-	[IRQ_UARTINT0]			= 3,
-	[IRQ_UARTINT1]			= 3,
-	[IRQ_DM355_SPINT0_0]		= 3,
-	[IRQ_DM355_SPINT0_1]		= 3,
-	[IRQ_DM355_GPIO0]		= 3,
-	[IRQ_DM355_GPIO1]		= 7,
-	[IRQ_DM355_GPIO2]		= 4,
-	[IRQ_DM355_GPIO3]		= 4,
-	[IRQ_DM355_GPIO4]		= 7,
-	[IRQ_DM355_GPIO5]		= 7,
-	[IRQ_DM355_GPIO6]		= 7,
-	[IRQ_DM355_GPIO7]		= 7,
-	[IRQ_DM355_GPIO8]		= 7,
-	[IRQ_DM355_GPIO9]		= 7,
-	[IRQ_DM355_GPIOBNK0]		= 7,
-	[IRQ_DM355_GPIOBNK1]		= 7,
-	[IRQ_DM355_GPIOBNK2]		= 7,
-	[IRQ_DM355_GPIOBNK3]		= 7,
-	[IRQ_DM355_GPIOBNK4]		= 7,
-	[IRQ_DM355_GPIOBNK5]		= 7,
-	[IRQ_DM355_GPIOBNK6]		= 7,
-	[IRQ_COMMTX]			= 7,
-	[IRQ_COMMRX]			= 7,
-	[IRQ_EMUINT]			= 7,
-};
-
-/*----------------------------------------------------------------------*/
-
-static s8 queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{1, 7},
-	{-1, -1},
-};
-
-static const struct dma_slave_map dm355_edma_map[] = {
-	{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) },
-	{ "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 8) },
-	{ "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 9) },
-	{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
-	{ "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
-	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
-	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
-	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
-	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
-	{ "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
-	{ "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
-	{ "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
-	{ "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
-};
-
-static struct edma_soc_info dm355_edma_pdata = {
-	.queue_priority_mapping	= queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
-	.slave_map		= dm355_edma_map,
-	.slavecnt		= ARRAY_SIZE(dm355_edma_map),
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= 0x01c00000,
-		.end	= 0x01c00000 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= 0x01c10000,
-		.end	= 0x01c10000 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc1",
-		.start	= 0x01c10400,
-		.end	= 0x01c10400 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCERRINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* not using (or muxing) TC*_ERR */
-};
-
-static const struct platform_device_info dm355_edma_device __initconst = {
-	.name		= "edma",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= edma_resources,
-	.num_res	= ARRAY_SIZE(edma_resources),
-	.data		= &dm355_edma_pdata,
-	.size_data	= sizeof(dm355_edma_pdata),
-};
-
-static struct resource dm355_asp1_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_ASP1_BASE,
-		.end	= DAVINCI_ASP1_BASE + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP1_TX,
-		.end	= DAVINCI_DMA_ASP1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP1_RX,
-		.end	= DAVINCI_DMA_ASP1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm355_asp1_device = {
-	.name		= "davinci-mcbsp",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(dm355_asp1_resources),
-	.resource	= dm355_asp1_resources,
-};
-
-static void dm355_ccdc_setup_pinmux(void)
-{
-	davinci_cfg_reg(DM355_VIN_PCLK);
-	davinci_cfg_reg(DM355_VIN_CAM_WEN);
-	davinci_cfg_reg(DM355_VIN_CAM_VD);
-	davinci_cfg_reg(DM355_VIN_CAM_HD);
-	davinci_cfg_reg(DM355_VIN_YIN_EN);
-	davinci_cfg_reg(DM355_VIN_CINL_EN);
-	davinci_cfg_reg(DM355_VIN_CINH_EN);
-}
-
-static struct resource dm355_vpss_resources[] = {
-	{
-		/* VPSS BL Base address */
-		.name		= "vpss",
-		.start          = 0x01c70800,
-		.end            = 0x01c70800 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		/* VPSS CLK Base address */
-		.name		= "vpss",
-		.start          = 0x01c70000,
-		.end            = 0x01c70000 + 0xf,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm355_vpss_device = {
-	.name			= "vpss",
-	.id			= -1,
-	.dev.platform_data	= "dm355_vpss",
-	.num_resources		= ARRAY_SIZE(dm355_vpss_resources),
-	.resource		= dm355_vpss_resources,
-};
-
-static struct resource vpfe_resources[] = {
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.flags          = IORESOURCE_IRQ,
-	},
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
-static struct resource dm355_ccdc_resource[] = {
-	/* CCDC Base address */
-	{
-		.flags          = IORESOURCE_MEM,
-		.start          = 0x01c70600,
-		.end            = 0x01c70600 + 0x1ff,
-	},
-};
-static struct platform_device dm355_ccdc_dev = {
-	.name           = "dm355_ccdc",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(dm355_ccdc_resource),
-	.resource       = dm355_ccdc_resource,
-	.dev = {
-		.dma_mask               = &vpfe_capture_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-		.platform_data		= dm355_ccdc_setup_pinmux,
-	},
-};
-
-static struct platform_device vpfe_capture_dev = {
-	.name		= CAPTURE_DRV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(vpfe_resources),
-	.resource	= vpfe_resources,
-	.dev = {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm355_osd_resources[] = {
-	{
-		.start	= DM355_OSD_BASE,
-		.end	= DM355_OSD_BASE + 0x17f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm355_osd_dev = {
-	.name		= DM355_VPBE_OSD_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm355_osd_resources),
-	.resource	= dm355_osd_resources,
-	.dev		= {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm355_venc_resources[] = {
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* venc registers io space */
-	{
-		.start	= DM355_VENC_BASE,
-		.end	= DM355_VENC_BASE + 0x17f,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* VDAC config register io space */
-	{
-		.start	= DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG,
-		.end	= DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource dm355_v4l2_disp_resources[] = {
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* venc registers io space */
-	{
-		.start	= DM355_VENC_BASE,
-		.end	= DM355_VENC_BASE + 0x17f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static int dm355_vpbe_setup_pinmux(u32 if_type, int field)
-{
-	switch (if_type) {
-	case MEDIA_BUS_FMT_SGRBG8_1X8:
-		davinci_cfg_reg(DM355_VOUT_FIELD_G70);
-		break;
-	case MEDIA_BUS_FMT_YUYV10_1X20:
-		if (field)
-			davinci_cfg_reg(DM355_VOUT_FIELD);
-		else
-			davinci_cfg_reg(DM355_VOUT_FIELD_G70);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	davinci_cfg_reg(DM355_VOUT_COUTL_EN);
-	davinci_cfg_reg(DM355_VOUT_COUTH_EN);
-
-	return 0;
-}
-
-static int dm355_venc_setup_clock(enum vpbe_enc_timings_type type,
-				   unsigned int pclock)
-{
-	void __iomem *vpss_clk_ctrl_reg;
-
-	vpss_clk_ctrl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL);
-
-	switch (type) {
-	case VPBE_ENC_STD:
-		writel(VPSS_DACCLKEN_ENABLE | VPSS_VENCCLKEN_ENABLE,
-		       vpss_clk_ctrl_reg);
-		break;
-	case VPBE_ENC_DV_TIMINGS:
-		if (pclock > 27000000)
-			/*
-			 * For HD, use external clock source since we cannot
-			 * support HD mode with internal clocks.
-			 */
-			writel(VPSS_MUXSEL_EXTCLK_ENABLE, vpss_clk_ctrl_reg);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct platform_device dm355_vpbe_display = {
-	.name		= "vpbe-v4l2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm355_v4l2_disp_resources),
-	.resource	= dm355_v4l2_disp_resources,
-	.dev		= {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct venc_platform_data dm355_venc_pdata = {
-	.setup_pinmux	= dm355_vpbe_setup_pinmux,
-	.setup_clock	= dm355_venc_setup_clock,
-};
-
-static struct platform_device dm355_venc_dev = {
-	.name		= DM355_VPBE_VENC_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm355_venc_resources),
-	.resource	= dm355_venc_resources,
-	.dev		= {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= (void *)&dm355_venc_pdata,
-	},
-};
-
-static struct platform_device dm355_vpbe_dev = {
-	.name		= "vpbe_controller",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm355_gpio_resources[] = {
-	{	/* registers */
-		.start	= DAVINCI_GPIO_BASE,
-		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{	/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK2),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK3),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK3),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK4),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK4),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK5),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK5),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK6),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK6),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 104,
-};
-
-int __init dm355_gpio_register(void)
-{
-	return davinci_gpio_register(dm355_gpio_resources,
-				     ARRAY_SIZE(dm355_gpio_resources),
-				     &dm355_gpio_platform_data);
-}
-/*----------------------------------------------------------------------*/
-
-static struct map_desc dm355_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm355_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb73b,
-		.manufacturer	= 0x00f,
-		.cpu_id		= DAVINCI_CPU_ID_DM355,
-		.name		= "dm355",
-	},
-};
-
-/*
- * Bottom half of timer0 is used for clockevent, top half is used for
- * clocksource.
- */
-static const struct davinci_timer_cfg dm355_timer_cfg = {
-	.reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_4K),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
-	},
-};
-
-static struct plat_serial8250_port dm355_serial0_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT0),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm355_serial1_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART1_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT1),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm355_serial2_platform_data[] = {
-	{
-		.mapbase	= DM355_UART2_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_DM355_UARTINT2),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-
-struct platform_device dm355_serial_device[] = {
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM,
-		.dev			= {
-			.platform_data	= dm355_serial0_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM1,
-		.dev			= {
-			.platform_data	= dm355_serial1_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM2,
-		.dev			= {
-			.platform_data	= dm355_serial2_platform_data,
-		}
-	},
-	{
-	}
-};
-
-static const struct davinci_soc_info davinci_soc_info_dm355 = {
-	.io_desc		= dm355_io_desc,
-	.io_desc_num		= ARRAY_SIZE(dm355_io_desc),
-	.jtag_id_reg		= 0x01c40028,
-	.ids			= dm355_ids,
-	.ids_num		= ARRAY_SIZE(dm355_ids),
-	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
-	.pinmux_pins		= dm355_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(dm355_pins),
-	.sram_dma		= 0x00010000,
-	.sram_len		= SZ_32K,
-};
-
-void __init dm355_init_asp1(u32 evt_enable)
-{
-	/* we don't use ASP1 IRQs, or we'd need to mux them ... */
-	if (evt_enable & ASP1_TX_EVT_EN)
-		davinci_cfg_reg(DM355_EVT8_ASP1_TX);
-
-	if (evt_enable & ASP1_RX_EVT_EN)
-		davinci_cfg_reg(DM355_EVT9_ASP1_RX);
-
-	platform_device_register(&dm355_asp1_device);
-}
-
-void __init dm355_init(void)
-{
-	davinci_common_init(&davinci_soc_info_dm355);
-	davinci_map_sysmod();
-}
-
-void __init dm355_init_time(void)
-{
-	void __iomem *pll1, *psc;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM355_REF_FREQ);
-
-	pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
-	dm355_pll1_init(NULL, pll1, NULL);
-
-	psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
-	dm355_psc_init(NULL, psc);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &dm355_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource dm355_pll2_resources[] = {
-	{
-		.start	= DAVINCI_PLL2_BASE,
-		.end	= DAVINCI_PLL2_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm355_pll2_device = {
-	.name		= "dm355-pll2",
-	.id		= -1,
-	.resource	= dm355_pll2_resources,
-	.num_resources	= ARRAY_SIZE(dm355_pll2_resources),
-};
-
-void __init dm355_register_clocks(void)
-{
-	/* PLL1 and PSC are registered in dm355_init_time() */
-	platform_device_register(&dm355_pll2_device);
-}
-
-int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
-				struct vpbe_config *vpbe_cfg)
-{
-	if (vpfe_cfg || vpbe_cfg)
-		platform_device_register(&dm355_vpss_device);
-
-	if (vpfe_cfg) {
-		vpfe_capture_dev.dev.platform_data = vpfe_cfg;
-		platform_device_register(&dm355_ccdc_dev);
-		platform_device_register(&vpfe_capture_dev);
-	}
-
-	if (vpbe_cfg) {
-		dm355_vpbe_dev.dev.platform_data = vpbe_cfg;
-		platform_device_register(&dm355_osd_dev);
-		platform_device_register(&dm355_venc_dev);
-		platform_device_register(&dm355_vpbe_dev);
-		platform_device_register(&dm355_vpbe_display);
-	}
-
-	return 0;
-}
-
-static const struct davinci_aintc_config dm355_aintc_config = {
-	.reg = {
-		.start		= DAVINCI_ARM_INTC_BASE,
-		.end		= DAVINCI_ARM_INTC_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= 64,
-	.prios			= dm355_default_priorities,
-};
-
-void __init dm355_init_irq(void)
-{
-	davinci_aintc_init(&dm355_aintc_config);
-}
-
-static int __init dm355_init_devices(void)
-{
-	struct platform_device *edma_pdev;
-	int ret = 0;
-
-	if (!cpu_is_davinci_dm355())
-		return 0;
-
-	davinci_cfg_reg(DM355_INT_EDMA_CC);
-	edma_pdev = platform_device_register_full(&dm355_edma_device);
-	if (IS_ERR(edma_pdev)) {
-		pr_warn("%s: Failed to register eDMA\n", __func__);
-		return PTR_ERR(edma_pdev);
-	}
-
-	ret = davinci_init_wdt();
-	if (ret)
-		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
-
-	return ret;
-}
-postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
deleted file mode 100644
index c1e0d46996e4..000000000000
--- a/arch/arm/mach-davinci/dm365.c
+++ /dev/null
@@ -1,1104 +0,0 @@
-/*
- * TI DaVinci DM365 chip specific setup
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-aintc.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/keyscan-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/mux.h>
-#include <mach/serial.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include "asp.h"
-#include "davinci.h"
-#include "irqs.h"
-#include "mux.h"
-
-#define DM365_REF_FREQ		24000000	/* 24 MHz on the DM365 EVM */
-#define DM365_RTC_BASE			0x01c69000
-#define DM365_KEYSCAN_BASE		0x01c69400
-#define DM365_OSD_BASE			0x01c71c00
-#define DM365_VENC_BASE			0x01c71e00
-#define DAVINCI_DM365_VC_BASE		0x01d0c000
-#define DAVINCI_DMA_VC_TX		2
-#define DAVINCI_DMA_VC_RX		3
-#define DM365_EMAC_BASE			0x01d07000
-#define DM365_EMAC_MDIO_BASE		(DM365_EMAC_BASE + 0x4000)
-#define DM365_EMAC_CNTRL_OFFSET		0x0000
-#define DM365_EMAC_CNTRL_MOD_OFFSET	0x3000
-#define DM365_EMAC_CNTRL_RAM_OFFSET	0x1000
-#define DM365_EMAC_CNTRL_RAM_SIZE	0x2000
-
-#define INTMUX		0x18
-#define EVTMUX		0x1c
-
-
-static const struct mux_config dm365_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM365,	MMCSD0,		0,   24,     1,	  0,	 false)
-
-MUX_CFG(DM365,	SD1_CLK,	0,   16,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_CMD,	4,   30,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA3,	4,   28,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA2,	4,   26,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA1,	4,   24,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA0,	4,   22,    3,	  1,	 false)
-
-MUX_CFG(DM365,	I2C_SDA,	3,   23,    3,	  2,	 false)
-MUX_CFG(DM365,	I2C_SCL,	3,   21,    3,	  2,	 false)
-
-MUX_CFG(DM365,	AEMIF_AR_A14,	2,   0,     3,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_AR_BA0,	2,   0,     3,	  2,	 false)
-MUX_CFG(DM365,	AEMIF_A3,	2,   2,     3,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_A7,	2,   4,     3,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_D15_8,	2,   6,     1,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_CE0,	2,   7,     1,	  0,	 false)
-MUX_CFG(DM365,	AEMIF_CE1,	2,   8,     1,    0,     false)
-MUX_CFG(DM365,	AEMIF_WE_OE,	2,   9,     1,    0,     false)
-
-MUX_CFG(DM365,	MCBSP0_BDX,	0,   23,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_X,	0,   22,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_BFSX,	0,   21,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_BDR,	0,   20,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_R,	0,   19,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_BFSR,	0,   18,    1,	  1,	 false)
-
-MUX_CFG(DM365,	SPI0_SCLK,	3,   28,    1,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDI,	3,   26,    3,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDO,	3,   25,    1,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDENA0,	3,   29,    3,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDENA1,	3,   26,    3,    2,	 false)
-
-MUX_CFG(DM365,	UART0_RXD,	3,   20,    1,    1,	 false)
-MUX_CFG(DM365,	UART0_TXD,	3,   19,    1,    1,	 false)
-MUX_CFG(DM365,	UART1_RXD,	3,   17,    3,    2,	 false)
-MUX_CFG(DM365,	UART1_TXD,	3,   15,    3,    2,	 false)
-MUX_CFG(DM365,	UART1_RTS,	3,   23,    3,    1,	 false)
-MUX_CFG(DM365,	UART1_CTS,	3,   21,    3,    1,	 false)
-
-MUX_CFG(DM365,  EMAC_TX_EN,	3,   17,    3,    1,     false)
-MUX_CFG(DM365,  EMAC_TX_CLK,	3,   15,    3,    1,     false)
-MUX_CFG(DM365,  EMAC_COL,	3,   14,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD3,	3,   13,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD2,	3,   12,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD1,	3,   11,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD0,	3,   10,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD3,	3,   9,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD2,	3,   8,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD1,	3,   7,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD0,	3,   6,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RX_CLK,	3,   5,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RX_DV,	3,   4,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RX_ER,	3,   3,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_CRS,	3,   2,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_MDIO,	3,   1,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_MDCLK,	3,   0,     1,    1,     false)
-
-MUX_CFG(DM365,	KEYSCAN,	2,   0,     0x3f, 0x3f,  false)
-
-MUX_CFG(DM365,	PWM0,		1,   0,     3,    2,     false)
-MUX_CFG(DM365,	PWM0_G23,	3,   26,    3,    3,     false)
-MUX_CFG(DM365,	PWM1,		1,   2,     3,    2,     false)
-MUX_CFG(DM365,	PWM1_G25,	3,   29,    3,    2,     false)
-MUX_CFG(DM365,	PWM2_G87,	1,   10,    3,    2,     false)
-MUX_CFG(DM365,	PWM2_G88,	1,   8,     3,    2,     false)
-MUX_CFG(DM365,	PWM2_G89,	1,   6,     3,    2,     false)
-MUX_CFG(DM365,	PWM2_G90,	1,   4,     3,    2,     false)
-MUX_CFG(DM365,	PWM3_G80,	1,   20,    3,    3,     false)
-MUX_CFG(DM365,	PWM3_G81,	1,   18,    3,    3,     false)
-MUX_CFG(DM365,	PWM3_G85,	1,   14,    3,    2,     false)
-MUX_CFG(DM365,	PWM3_G86,	1,   12,    3,    2,     false)
-
-MUX_CFG(DM365,	SPI1_SCLK,	4,   2,     3,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDI,	3,   31,    1,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDO,	4,   0,     3,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDENA0,	4,   4,     3,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDENA1,	4,   0,     3,    2,	 false)
-
-MUX_CFG(DM365,	SPI2_SCLK,	4,   10,    3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDI,	4,   6,     3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDO,	4,   8,     3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDENA0,	4,   12,    3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDENA1,	4,   8,     3,    2,	 false)
-
-MUX_CFG(DM365,	SPI3_SCLK,	0,   0,	    3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDI,	0,   2,     3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDO,	0,   6,     3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDENA0,	0,   4,     3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDENA1,	0,   6,     3,    3,	 false)
-
-MUX_CFG(DM365,	SPI4_SCLK,	4,   18,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDI,	4,   14,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDO,	4,   16,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDENA0,	4,   20,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDENA1,	4,   16,    3,    2,	 false)
-
-MUX_CFG(DM365,	CLKOUT0,	4,   20,    3,    3,     false)
-MUX_CFG(DM365,	CLKOUT1,	4,   16,    3,    3,     false)
-MUX_CFG(DM365,	CLKOUT2,	4,   8,     3,    3,     false)
-
-MUX_CFG(DM365,	GPIO20,		3,   21,    3,    0,	 false)
-MUX_CFG(DM365,	GPIO30,		4,   6,     3,	  0,	 false)
-MUX_CFG(DM365,	GPIO31,		4,   8,     3,	  0,	 false)
-MUX_CFG(DM365,	GPIO32,		4,   10,    3,	  0,	 false)
-MUX_CFG(DM365,	GPIO33,		4,   12,    3,	  0,	 false)
-MUX_CFG(DM365,	GPIO40,		4,   26,    3,	  0,	 false)
-MUX_CFG(DM365,	GPIO64_57,	2,   6,     1,	  0,	 false)
-
-MUX_CFG(DM365,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
-MUX_CFG(DM365,	VOUT_FIELD_G81,	1,   18,    3,	  0,	 false)
-MUX_CFG(DM365,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
-MUX_CFG(DM365,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
-MUX_CFG(DM365,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
-MUX_CFG(DM365,	VIN_CAM_WEN,	0,   14,    3,	  0,	 false)
-MUX_CFG(DM365,	VIN_CAM_VD,	0,   13,    1,	  0,	 false)
-MUX_CFG(DM365,	VIN_CAM_HD,	0,   12,    1,	  0,	 false)
-MUX_CFG(DM365,	VIN_YIN4_7_EN,	0,   0,     0xff, 0,	 false)
-MUX_CFG(DM365,	VIN_YIN0_3_EN,	0,   8,     0xf,  0,	 false)
-
-INT_CFG(DM365,  INT_EDMA_CC,         2,     1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC0_ERR,    3,     1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC1_ERR,    4,     1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC2_ERR,    22,    1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC3_ERR,    23,    1,    1,     false)
-INT_CFG(DM365,  INT_PRTCSS,          10,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_RXTHRESH,   14,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_RXPULSE,    15,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_TXPULSE,    16,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_MISCPULSE,  17,    1,    1,     false)
-INT_CFG(DM365,  INT_IMX0_ENABLE,     0,     1,    0,     false)
-INT_CFG(DM365,  INT_IMX0_DISABLE,    0,     1,    1,     false)
-INT_CFG(DM365,  INT_HDVICP_ENABLE,   0,     1,    1,     false)
-INT_CFG(DM365,  INT_HDVICP_DISABLE,  0,     1,    0,     false)
-INT_CFG(DM365,  INT_IMX1_ENABLE,     24,    1,    1,     false)
-INT_CFG(DM365,  INT_IMX1_DISABLE,    24,    1,    0,     false)
-INT_CFG(DM365,  INT_NSF_ENABLE,      25,    1,    1,     false)
-INT_CFG(DM365,  INT_NSF_DISABLE,     25,    1,    0,     false)
-
-EVT_CFG(DM365,	EVT2_ASP_TX,         0,     1,    0,     false)
-EVT_CFG(DM365,	EVT3_ASP_RX,         1,     1,    0,     false)
-EVT_CFG(DM365,	EVT2_VC_TX,          0,     1,    1,     false)
-EVT_CFG(DM365,	EVT3_VC_RX,          1,     1,    1,     false)
-#endif
-};
-
-static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32);
-
-static struct davinci_spi_platform_data dm365_spi0_pdata = {
-	.version 	= SPI_VERSION_1,
-	.num_chipselect = 2,
-	.dma_event_q	= EVENTQ_3,
-	.prescaler_limit = 1,
-};
-
-static struct resource dm365_spi0_resources[] = {
-	{
-		.start = 0x01c66000,
-		.end   = 0x01c667ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM365_SPIINT0_0),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_spi0_device = {
-	.name = "spi_davinci",
-	.id = 0,
-	.dev = {
-		.dma_mask = &dm365_spi0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &dm365_spi0_pdata,
-	},
-	.num_resources = ARRAY_SIZE(dm365_spi0_resources),
-	.resource = dm365_spi0_resources,
-};
-
-void __init dm365_init_spi0(unsigned chipselect_mask,
-		const struct spi_board_info *info, unsigned len)
-{
-	davinci_cfg_reg(DM365_SPI0_SCLK);
-	davinci_cfg_reg(DM365_SPI0_SDI);
-	davinci_cfg_reg(DM365_SPI0_SDO);
-
-	/* not all slaves will be wired up */
-	if (chipselect_mask & BIT(0))
-		davinci_cfg_reg(DM365_SPI0_SDENA0);
-	if (chipselect_mask & BIT(1))
-		davinci_cfg_reg(DM365_SPI0_SDENA1);
-
-	spi_register_board_info(info, len);
-
-	platform_device_register(&dm365_spi0_device);
-}
-
-static struct resource dm365_gpio_resources[] = {
-	{	/* registers */
-		.start	= DAVINCI_GPIO_BASE,
-		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{	/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO2),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO3),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO3),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO4),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO4),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO5),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO5),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO6),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO6),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO7),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO7),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 104,
-	.gpio_unbanked	= 8,
-};
-
-int __init dm365_gpio_register(void)
-{
-	return davinci_gpio_register(dm365_gpio_resources,
-				     ARRAY_SIZE(dm365_gpio_resources),
-				     &dm365_gpio_platform_data);
-}
-
-static struct emac_platform_data dm365_emac_pdata = {
-	.ctrl_reg_offset	= DM365_EMAC_CNTRL_OFFSET,
-	.ctrl_mod_reg_offset	= DM365_EMAC_CNTRL_MOD_OFFSET,
-	.ctrl_ram_offset	= DM365_EMAC_CNTRL_RAM_OFFSET,
-	.ctrl_ram_size		= DM365_EMAC_CNTRL_RAM_SIZE,
-	.version		= EMAC_VERSION_2,
-};
-
-static struct resource dm365_emac_resources[] = {
-	{
-		.start	= DM365_EMAC_BASE,
-		.end	= DM365_EMAC_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXTHRESH),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXTHRESH),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXPULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXPULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_TXPULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_TXPULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_MISCPULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_MISCPULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_emac_device = {
-	.name		= "davinci_emac",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &dm365_emac_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(dm365_emac_resources),
-	.resource	= dm365_emac_resources,
-};
-
-static struct resource dm365_mdio_resources[] = {
-	{
-		.start	= DM365_EMAC_MDIO_BASE,
-		.end	= DM365_EMAC_MDIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm365_mdio_device = {
-	.name		= "davinci_mdio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm365_mdio_resources),
-	.resource	= dm365_mdio_resources,
-};
-
-static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_VDINT0]			= 2,
-	[IRQ_VDINT1]			= 6,
-	[IRQ_VDINT2]			= 6,
-	[IRQ_HISTINT]			= 6,
-	[IRQ_H3AINT]			= 6,
-	[IRQ_PRVUINT]			= 6,
-	[IRQ_RSZINT]			= 6,
-	[IRQ_DM365_INSFINT]		= 7,
-	[IRQ_VENCINT]			= 6,
-	[IRQ_ASQINT]			= 6,
-	[IRQ_IMXINT]			= 6,
-	[IRQ_DM365_IMCOPINT]		= 4,
-	[IRQ_USBINT]			= 4,
-	[IRQ_DM365_RTOINT]		= 7,
-	[IRQ_DM365_TINT5]		= 7,
-	[IRQ_DM365_TINT6]		= 5,
-	[IRQ_CCINT0]			= 5,
-	[IRQ_CCERRINT]			= 5,
-	[IRQ_TCERRINT0]			= 5,
-	[IRQ_TCERRINT]			= 7,
-	[IRQ_PSCIN]			= 4,
-	[IRQ_DM365_SPINT2_1]		= 7,
-	[IRQ_DM365_TINT7]		= 7,
-	[IRQ_DM365_SDIOINT0]		= 7,
-	[IRQ_MBXINT]			= 7,
-	[IRQ_MBRINT]			= 7,
-	[IRQ_MMCINT]			= 7,
-	[IRQ_DM365_MMCINT1]		= 7,
-	[IRQ_DM365_PWMINT3]		= 7,
-	[IRQ_AEMIFINT]			= 2,
-	[IRQ_DM365_SDIOINT1]		= 2,
-	[IRQ_TINT0_TINT12]		= 7,
-	[IRQ_TINT0_TINT34]		= 7,
-	[IRQ_TINT1_TINT12]		= 7,
-	[IRQ_TINT1_TINT34]		= 7,
-	[IRQ_PWMINT0]			= 7,
-	[IRQ_PWMINT1]			= 3,
-	[IRQ_PWMINT2]			= 3,
-	[IRQ_I2C]			= 3,
-	[IRQ_UARTINT0]			= 3,
-	[IRQ_UARTINT1]			= 3,
-	[IRQ_DM365_RTCINT]		= 3,
-	[IRQ_DM365_SPIINT0_0]		= 3,
-	[IRQ_DM365_SPIINT3_0]		= 3,
-	[IRQ_DM365_GPIO0]		= 3,
-	[IRQ_DM365_GPIO1]		= 7,
-	[IRQ_DM365_GPIO2]		= 4,
-	[IRQ_DM365_GPIO3]		= 4,
-	[IRQ_DM365_GPIO4]		= 7,
-	[IRQ_DM365_GPIO5]		= 7,
-	[IRQ_DM365_GPIO6]		= 7,
-	[IRQ_DM365_GPIO7]		= 7,
-	[IRQ_DM365_EMAC_RXTHRESH]	= 7,
-	[IRQ_DM365_EMAC_RXPULSE]	= 7,
-	[IRQ_DM365_EMAC_TXPULSE]	= 7,
-	[IRQ_DM365_EMAC_MISCPULSE]	= 7,
-	[IRQ_DM365_GPIO12]		= 7,
-	[IRQ_DM365_GPIO13]		= 7,
-	[IRQ_DM365_GPIO14]		= 7,
-	[IRQ_DM365_GPIO15]		= 7,
-	[IRQ_DM365_KEYINT]		= 7,
-	[IRQ_DM365_TCERRINT2]		= 7,
-	[IRQ_DM365_TCERRINT3]		= 7,
-	[IRQ_DM365_EMUINT]		= 7,
-};
-
-/* Four Transfer Controllers on DM365 */
-static s8 dm365_queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 7},
-	{1, 7},
-	{2, 7},
-	{3, 0},
-	{-1, -1},
-};
-
-static const struct dma_slave_map dm365_edma_map[] = {
-	{ "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) },
-	{ "davinci_voicecodec", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci_voicecodec", "rx", EDMA_FILTER_PARAM(0, 3) },
-	{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
-	{ "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
-	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
-	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
-	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
-	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
-	{ "spi_davinci.3", "tx", EDMA_FILTER_PARAM(0, 18) },
-	{ "spi_davinci.3", "rx", EDMA_FILTER_PARAM(0, 19) },
-	{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
-	{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
-	{ "da830-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
-	{ "da830-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
-};
-
-static struct edma_soc_info dm365_edma_pdata = {
-	.queue_priority_mapping	= dm365_queue_priority_mapping,
-	.default_queue		= EVENTQ_3,
-	.slave_map		= dm365_edma_map,
-	.slavecnt		= ARRAY_SIZE(dm365_edma_map),
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= 0x01c00000,
-		.end	= 0x01c00000 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= 0x01c10000,
-		.end	= 0x01c10000 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc1",
-		.start	= 0x01c10400,
-		.end	= 0x01c10400 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc2",
-		.start	= 0x01c10800,
-		.end	= 0x01c10800 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc3",
-		.start	= 0x01c10c00,
-		.end	= 0x01c10c00 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCERRINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* not using TC*_ERR */
-};
-
-static const struct platform_device_info dm365_edma_device __initconst = {
-	.name		= "edma",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= edma_resources,
-	.num_res	= ARRAY_SIZE(edma_resources),
-	.data		= &dm365_edma_pdata,
-	.size_data	= sizeof(dm365_edma_pdata),
-};
-
-static struct resource dm365_asp_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_DM365_ASP0_BASE,
-		.end	= DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP0_TX,
-		.end	= DAVINCI_DMA_ASP0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP0_RX,
-		.end	= DAVINCI_DMA_ASP0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm365_asp_device = {
-	.name		= "davinci-mcbsp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_asp_resources),
-	.resource	= dm365_asp_resources,
-};
-
-static struct resource dm365_vc_resources[] = {
-	{
-		.start	= DAVINCI_DM365_VC_BASE,
-		.end	= DAVINCI_DM365_VC_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_VC_TX,
-		.end	= DAVINCI_DMA_VC_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_VC_RX,
-		.end	= DAVINCI_DMA_VC_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm365_vc_device = {
-	.name		= "davinci_voicecodec",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_vc_resources),
-	.resource	= dm365_vc_resources,
-};
-
-static struct resource dm365_rtc_resources[] = {
-	{
-		.start = DM365_RTC_BASE,
-		.end = DM365_RTC_BASE + SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM365_RTCINT),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_rtc_device = {
-	.name = "rtc_davinci",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(dm365_rtc_resources),
-	.resource = dm365_rtc_resources,
-};
-
-static struct map_desc dm365_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-static struct resource dm365_ks_resources[] = {
-	{
-		/* registers */
-		.start = DM365_KEYSCAN_BASE,
-		.end = DM365_KEYSCAN_BASE + SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		/* interrupt */
-		.start = DAVINCI_INTC_IRQ(IRQ_DM365_KEYINT),
-		.end = DAVINCI_INTC_IRQ(IRQ_DM365_KEYINT),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_ks_device = {
-	.name		= "davinci_keyscan",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm365_ks_resources),
-	.resource	= dm365_ks_resources,
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm365_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb83e,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM365,
-		.name		= "dm365_rev1.1",
-	},
-	{
-		.variant	= 0x8,
-		.part_no	= 0xb83e,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM365,
-		.name		= "dm365_rev1.2",
-	},
-};
-
-/*
- * Bottom half of timer0 is used for clockevent, top half is used for
- * clocksource.
- */
-static const struct davinci_timer_cfg dm365_timer_cfg = {
-	.reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_128),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
-	},
-};
-
-#define DM365_UART1_BASE	(IO_PHYS + 0x106000)
-
-static struct plat_serial8250_port dm365_serial0_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT0),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm365_serial1_platform_data[] = {
-	{
-		.mapbase	= DM365_UART1_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT1),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-
-struct platform_device dm365_serial_device[] = {
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM,
-		.dev			= {
-			.platform_data	= dm365_serial0_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM1,
-		.dev			= {
-			.platform_data	= dm365_serial1_platform_data,
-		}
-	},
-	{
-	}
-};
-
-static const struct davinci_soc_info davinci_soc_info_dm365 = {
-	.io_desc		= dm365_io_desc,
-	.io_desc_num		= ARRAY_SIZE(dm365_io_desc),
-	.jtag_id_reg		= 0x01c40028,
-	.ids			= dm365_ids,
-	.ids_num		= ARRAY_SIZE(dm365_ids),
-	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
-	.pinmux_pins		= dm365_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(dm365_pins),
-	.emac_pdata		= &dm365_emac_pdata,
-	.sram_dma		= 0x00010000,
-	.sram_len		= SZ_32K,
-};
-
-void __init dm365_init_asp(void)
-{
-	davinci_cfg_reg(DM365_MCBSP0_BDX);
-	davinci_cfg_reg(DM365_MCBSP0_X);
-	davinci_cfg_reg(DM365_MCBSP0_BFSX);
-	davinci_cfg_reg(DM365_MCBSP0_BDR);
-	davinci_cfg_reg(DM365_MCBSP0_R);
-	davinci_cfg_reg(DM365_MCBSP0_BFSR);
-	davinci_cfg_reg(DM365_EVT2_ASP_TX);
-	davinci_cfg_reg(DM365_EVT3_ASP_RX);
-	platform_device_register(&dm365_asp_device);
-}
-
-void __init dm365_init_vc(void)
-{
-	davinci_cfg_reg(DM365_EVT2_VC_TX);
-	davinci_cfg_reg(DM365_EVT3_VC_RX);
-	platform_device_register(&dm365_vc_device);
-}
-
-void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
-{
-	dm365_ks_device.dev.platform_data = pdata;
-	platform_device_register(&dm365_ks_device);
-}
-
-void __init dm365_init_rtc(void)
-{
-	davinci_cfg_reg(DM365_INT_PRTCSS);
-	platform_device_register(&dm365_rtc_device);
-}
-
-void __init dm365_init(void)
-{
-	davinci_common_init(&davinci_soc_info_dm365);
-	davinci_map_sysmod();
-}
-
-void __init dm365_init_time(void)
-{
-	void __iomem *pll1, *pll2, *psc;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM365_REF_FREQ);
-
-	pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
-	dm365_pll1_init(NULL, pll1, NULL);
-
-	pll2 = ioremap(DAVINCI_PLL2_BASE, SZ_1K);
-	dm365_pll2_init(NULL, pll2, NULL);
-
-	psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
-	dm365_psc_init(NULL, psc);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &dm365_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-void __init dm365_register_clocks(void)
-{
-	/* all clocks are currently registered in dm365_init_time() */
-}
-
-static struct resource dm365_vpss_resources[] = {
-	{
-		/* VPSS ISP5 Base address */
-		.name           = "isp5",
-		.start          = 0x01c70000,
-		.end            = 0x01c70000 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		/* VPSS CLK Base address */
-		.name           = "vpss",
-		.start          = 0x01c70200,
-		.end            = 0x01c70200 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm365_vpss_device = {
-       .name                   = "vpss",
-       .id                     = -1,
-       .dev.platform_data      = "dm365_vpss",
-       .num_resources          = ARRAY_SIZE(dm365_vpss_resources),
-       .resource               = dm365_vpss_resources,
-};
-
-static struct resource vpfe_resources[] = {
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.flags          = IORESOURCE_IRQ,
-	},
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
-static struct platform_device vpfe_capture_dev = {
-	.name           = CAPTURE_DRV_NAME,
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(vpfe_resources),
-	.resource       = vpfe_resources,
-	.dev = {
-		.dma_mask               = &vpfe_capture_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
-static void dm365_isif_setup_pinmux(void)
-{
-	davinci_cfg_reg(DM365_VIN_CAM_WEN);
-	davinci_cfg_reg(DM365_VIN_CAM_VD);
-	davinci_cfg_reg(DM365_VIN_CAM_HD);
-	davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
-	davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
-}
-
-static struct resource isif_resource[] = {
-	/* ISIF Base address */
-	{
-		.start          = 0x01c71000,
-		.end            = 0x01c71000 + 0x1ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	/* ISIF Linearization table 0 */
-	{
-		.start          = 0x1C7C000,
-		.end            = 0x1C7C000 + 0x2ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	/* ISIF Linearization table 1 */
-	{
-		.start          = 0x1C7C400,
-		.end            = 0x1C7C400 + 0x2ff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-static struct platform_device dm365_isif_dev = {
-	.name           = "isif",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(isif_resource),
-	.resource       = isif_resource,
-	.dev = {
-		.dma_mask               = &vpfe_capture_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-		.platform_data		= dm365_isif_setup_pinmux,
-	},
-};
-
-static struct resource dm365_osd_resources[] = {
-	{
-		.start = DM365_OSD_BASE,
-		.end   = DM365_OSD_BASE + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static u64 dm365_video_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device dm365_osd_dev = {
-	.name		= DM365_VPBE_OSD_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_osd_resources),
-	.resource	= dm365_osd_resources,
-	.dev		= {
-		.dma_mask		= &dm365_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm365_venc_resources[] = {
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end   = DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags = IORESOURCE_IRQ,
-	},
-	/* venc registers io space */
-	{
-		.start = DM365_VENC_BASE,
-		.end   = DM365_VENC_BASE + 0x177,
-		.flags = IORESOURCE_MEM,
-	},
-	/* vdaccfg registers io space */
-	{
-		.start = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG,
-		.end   = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct resource dm365_v4l2_disp_resources[] = {
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end   = DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags = IORESOURCE_IRQ,
-	},
-	/* venc registers io space */
-	{
-		.start = DM365_VENC_BASE,
-		.end   = DM365_VENC_BASE + 0x177,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static int dm365_vpbe_setup_pinmux(u32 if_type, int field)
-{
-	switch (if_type) {
-	case MEDIA_BUS_FMT_SGRBG8_1X8:
-		davinci_cfg_reg(DM365_VOUT_FIELD_G81);
-		davinci_cfg_reg(DM365_VOUT_COUTL_EN);
-		davinci_cfg_reg(DM365_VOUT_COUTH_EN);
-		break;
-	case MEDIA_BUS_FMT_YUYV10_1X20:
-		if (field)
-			davinci_cfg_reg(DM365_VOUT_FIELD);
-		else
-			davinci_cfg_reg(DM365_VOUT_FIELD_G81);
-		davinci_cfg_reg(DM365_VOUT_COUTL_EN);
-		davinci_cfg_reg(DM365_VOUT_COUTH_EN);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int dm365_venc_setup_clock(enum vpbe_enc_timings_type type,
-				  unsigned int pclock)
-{
-	void __iomem *vpss_clkctl_reg;
-	u32 val;
-
-	vpss_clkctl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL);
-
-	switch (type) {
-	case VPBE_ENC_STD:
-		val = VPSS_VENCCLKEN_ENABLE | VPSS_DACCLKEN_ENABLE;
-		break;
-	case VPBE_ENC_DV_TIMINGS:
-		if (pclock <= 27000000) {
-			val = VPSS_VENCCLKEN_ENABLE | VPSS_DACCLKEN_ENABLE;
-		} else {
-			/* set sysclk4 to output 74.25 MHz from pll1 */
-			val = VPSS_PLLC2SYSCLK5_ENABLE | VPSS_DACCLKEN_ENABLE |
-			      VPSS_VENCCLKEN_ENABLE;
-		}
-		break;
-	default:
-		return -EINVAL;
-	}
-	writel(val, vpss_clkctl_reg);
-
-	return 0;
-}
-
-static struct platform_device dm365_vpbe_display = {
-	.name		= "vpbe-v4l2",
-	.id		= -1,
-	.num_resources  = ARRAY_SIZE(dm365_v4l2_disp_resources),
-	.resource	= dm365_v4l2_disp_resources,
-	.dev		= {
-		.dma_mask		= &dm365_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct venc_platform_data dm365_venc_pdata = {
-	.setup_pinmux	= dm365_vpbe_setup_pinmux,
-	.setup_clock	= dm365_venc_setup_clock,
-};
-
-static struct platform_device dm365_venc_dev = {
-	.name		= DM365_VPBE_VENC_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_venc_resources),
-	.resource	= dm365_venc_resources,
-	.dev		= {
-		.dma_mask		= &dm365_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= (void *)&dm365_venc_pdata,
-	},
-};
-
-static struct platform_device dm365_vpbe_dev = {
-	.name		= "vpbe_controller",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &dm365_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-int __init dm365_init_video(struct vpfe_config *vpfe_cfg,
-				struct vpbe_config *vpbe_cfg)
-{
-	if (vpfe_cfg || vpbe_cfg)
-		platform_device_register(&dm365_vpss_device);
-
-	if (vpfe_cfg) {
-		vpfe_capture_dev.dev.platform_data = vpfe_cfg;
-		platform_device_register(&dm365_isif_dev);
-		platform_device_register(&vpfe_capture_dev);
-	}
-	if (vpbe_cfg) {
-		dm365_vpbe_dev.dev.platform_data = vpbe_cfg;
-		platform_device_register(&dm365_osd_dev);
-		platform_device_register(&dm365_venc_dev);
-		platform_device_register(&dm365_vpbe_dev);
-		platform_device_register(&dm365_vpbe_display);
-	}
-
-	return 0;
-}
-
-static const struct davinci_aintc_config dm365_aintc_config = {
-	.reg = {
-		.start		= DAVINCI_ARM_INTC_BASE,
-		.end		= DAVINCI_ARM_INTC_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= 64,
-	.prios			= dm365_default_priorities,
-};
-
-void __init dm365_init_irq(void)
-{
-	davinci_aintc_init(&dm365_aintc_config);
-}
-
-static int __init dm365_init_devices(void)
-{
-	struct platform_device *edma_pdev;
-	int ret = 0;
-
-	if (!cpu_is_davinci_dm365())
-		return 0;
-
-	davinci_cfg_reg(DM365_INT_EDMA_CC);
-	edma_pdev = platform_device_register_full(&dm365_edma_device);
-	if (IS_ERR(edma_pdev)) {
-		pr_warn("%s: Failed to register eDMA\n", __func__);
-		return PTR_ERR(edma_pdev);
-	}
-
-	platform_device_register(&dm365_mdio_device);
-	platform_device_register(&dm365_emac_device);
-
-	ret = davinci_init_wdt();
-	if (ret)
-		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
-
-	return ret;
-}
-postcore_initcall(dm365_init_devices);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
deleted file mode 100644
index 24988939ae46..000000000000
--- a/arch/arm/mach-davinci/dm644x.c
+++ /dev/null
@@ -1,767 +0,0 @@
-/*
- * TI DaVinci DM644x chip specific setup
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-aintc.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/mux.h>
-#include <mach/serial.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include "asp.h"
-#include "davinci.h"
-#include "irqs.h"
-#include "mux.h"
-
-/*
- * Device specific clocks
- */
-#define DM644X_REF_FREQ		27000000
-
-#define DM644X_EMAC_BASE		0x01c80000
-#define DM644X_EMAC_MDIO_BASE		(DM644X_EMAC_BASE + 0x4000)
-#define DM644X_EMAC_CNTRL_OFFSET	0x0000
-#define DM644X_EMAC_CNTRL_MOD_OFFSET	0x1000
-#define DM644X_EMAC_CNTRL_RAM_OFFSET	0x2000
-#define DM644X_EMAC_CNTRL_RAM_SIZE	0x2000
-
-static struct emac_platform_data dm644x_emac_pdata = {
-	.ctrl_reg_offset	= DM644X_EMAC_CNTRL_OFFSET,
-	.ctrl_mod_reg_offset	= DM644X_EMAC_CNTRL_MOD_OFFSET,
-	.ctrl_ram_offset	= DM644X_EMAC_CNTRL_RAM_OFFSET,
-	.ctrl_ram_size		= DM644X_EMAC_CNTRL_RAM_SIZE,
-	.version		= EMAC_VERSION_1,
-};
-
-static struct resource dm644x_emac_resources[] = {
-	{
-		.start	= DM644X_EMAC_BASE,
-		.end	= DM644X_EMAC_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_EMACINT),
-		.end   = DAVINCI_INTC_IRQ(IRQ_EMACINT),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm644x_emac_device = {
-       .name		= "davinci_emac",
-       .id		= 1,
-       .dev = {
-	       .platform_data	= &dm644x_emac_pdata,
-       },
-       .num_resources	= ARRAY_SIZE(dm644x_emac_resources),
-       .resource	= dm644x_emac_resources,
-};
-
-static struct resource dm644x_mdio_resources[] = {
-	{
-		.start	= DM644X_EMAC_MDIO_BASE,
-		.end	= DM644X_EMAC_MDIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm644x_mdio_device = {
-	.name		= "davinci_mdio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm644x_mdio_resources),
-	.resource	= dm644x_mdio_resources,
-};
-
-/*
- * Device specific mux setup
- *
- *	soc	description	mux  mode   mode  mux	 dbg
- *				reg  offset mask  mode
- */
-static const struct mux_config dm644x_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM644X, HDIREN,		0,   16,    1,	  1,	 true)
-MUX_CFG(DM644X, ATAEN,		0,   17,    1,	  1,	 true)
-MUX_CFG(DM644X, ATAEN_DISABLE,	0,   17,    1,	  0,	 true)
-
-MUX_CFG(DM644X, HPIEN_DISABLE,	0,   29,    1,	  0,	 true)
-
-MUX_CFG(DM644X, AEAW,		0,   0,     31,	  31,	 true)
-MUX_CFG(DM644X, AEAW0,		0,   0,     1,	  0,	 true)
-MUX_CFG(DM644X, AEAW1,		0,   1,     1,	  0,	 true)
-MUX_CFG(DM644X, AEAW2,		0,   2,     1,	  0,	 true)
-MUX_CFG(DM644X, AEAW3,		0,   3,     1,	  0,	 true)
-MUX_CFG(DM644X, AEAW4,		0,   4,     1,	  0,	 true)
-
-MUX_CFG(DM644X, MSTK,		1,   9,     1,	  0,	 false)
-
-MUX_CFG(DM644X, I2C,		1,   7,     1,	  1,	 false)
-
-MUX_CFG(DM644X, MCBSP,		1,   10,    1,	  1,	 false)
-
-MUX_CFG(DM644X, UART1,		1,   1,     1,	  1,	 true)
-MUX_CFG(DM644X, UART2,		1,   2,     1,	  1,	 true)
-
-MUX_CFG(DM644X, PWM0,		1,   4,     1,	  1,	 false)
-
-MUX_CFG(DM644X, PWM1,		1,   5,     1,	  1,	 false)
-
-MUX_CFG(DM644X, PWM2,		1,   6,     1,	  1,	 false)
-
-MUX_CFG(DM644X, VLYNQEN,	0,   15,    1,	  1,	 false)
-MUX_CFG(DM644X, VLSCREN,	0,   14,    1,	  1,	 false)
-MUX_CFG(DM644X, VLYNQWD,	0,   12,    3,	  3,	 false)
-
-MUX_CFG(DM644X, EMACEN,		0,   31,    1,	  1,	 true)
-
-MUX_CFG(DM644X, GPIO3V,		0,   31,    1,	  0,	 true)
-
-MUX_CFG(DM644X, GPIO0,		0,   24,    1,	  0,	 true)
-MUX_CFG(DM644X, GPIO3,		0,   25,    1,	  0,	 false)
-MUX_CFG(DM644X, GPIO43_44,	1,   7,     1,	  0,	 false)
-MUX_CFG(DM644X, GPIO46_47,	0,   22,    1,	  0,	 true)
-
-MUX_CFG(DM644X, RGB666,		0,   22,    1,	  1,	 true)
-
-MUX_CFG(DM644X, LOEEN,		0,   24,    1,	  1,	 true)
-MUX_CFG(DM644X, LFLDEN,		0,   25,    1,	  1,	 false)
-#endif
-};
-
-/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_VDINT0]		= 2,
-	[IRQ_VDINT1]		= 6,
-	[IRQ_VDINT2]		= 6,
-	[IRQ_HISTINT]		= 6,
-	[IRQ_H3AINT]		= 6,
-	[IRQ_PRVUINT]		= 6,
-	[IRQ_RSZINT]		= 6,
-	[7]			= 7,
-	[IRQ_VENCINT]		= 6,
-	[IRQ_ASQINT]		= 6,
-	[IRQ_IMXINT]		= 6,
-	[IRQ_VLCDINT]		= 6,
-	[IRQ_USBINT]		= 4,
-	[IRQ_EMACINT]		= 4,
-	[14]			= 7,
-	[15]			= 7,
-	[IRQ_CCINT0]		= 5,	/* dma */
-	[IRQ_CCERRINT]		= 5,	/* dma */
-	[IRQ_TCERRINT0]		= 5,	/* dma */
-	[IRQ_TCERRINT]		= 5,	/* dma */
-	[IRQ_PSCIN]		= 7,
-	[21]			= 7,
-	[IRQ_IDE]		= 4,
-	[23]			= 7,
-	[IRQ_MBXINT]		= 7,
-	[IRQ_MBRINT]		= 7,
-	[IRQ_MMCINT]		= 7,
-	[IRQ_SDIOINT]		= 7,
-	[28]			= 7,
-	[IRQ_DDRINT]		= 7,
-	[IRQ_AEMIFINT]		= 7,
-	[IRQ_VLQINT]		= 4,
-	[IRQ_TINT0_TINT12]	= 2,	/* clockevent */
-	[IRQ_TINT0_TINT34]	= 2,	/* clocksource */
-	[IRQ_TINT1_TINT12]	= 7,	/* DSP timer */
-	[IRQ_TINT1_TINT34]	= 7,	/* system tick */
-	[IRQ_PWMINT0]		= 7,
-	[IRQ_PWMINT1]		= 7,
-	[IRQ_PWMINT2]		= 7,
-	[IRQ_I2C]		= 3,
-	[IRQ_UARTINT0]		= 3,
-	[IRQ_UARTINT1]		= 3,
-	[IRQ_UARTINT2]		= 3,
-	[IRQ_SPINT0]		= 3,
-	[IRQ_SPINT1]		= 3,
-	[45]			= 7,
-	[IRQ_DSP2ARM0]		= 4,
-	[IRQ_DSP2ARM1]		= 4,
-	[IRQ_GPIO0]		= 7,
-	[IRQ_GPIO1]		= 7,
-	[IRQ_GPIO2]		= 7,
-	[IRQ_GPIO3]		= 7,
-	[IRQ_GPIO4]		= 7,
-	[IRQ_GPIO5]		= 7,
-	[IRQ_GPIO6]		= 7,
-	[IRQ_GPIO7]		= 7,
-	[IRQ_GPIOBNK0]		= 7,
-	[IRQ_GPIOBNK1]		= 7,
-	[IRQ_GPIOBNK2]		= 7,
-	[IRQ_GPIOBNK3]		= 7,
-	[IRQ_GPIOBNK4]		= 7,
-	[IRQ_COMMTX]		= 7,
-	[IRQ_COMMRX]		= 7,
-	[IRQ_EMUINT]		= 7,
-};
-
-/*----------------------------------------------------------------------*/
-
-static s8 queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{1, 7},
-	{-1, -1},
-};
-
-static const struct dma_slave_map dm644x_edma_map[] = {
-	{ "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) },
-	{ "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) },
-	{ "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) },
-	{ "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
-	{ "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
-};
-
-static struct edma_soc_info dm644x_edma_pdata = {
-	.queue_priority_mapping	= queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
-	.slave_map		= dm644x_edma_map,
-	.slavecnt		= ARRAY_SIZE(dm644x_edma_map),
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= 0x01c00000,
-		.end	= 0x01c00000 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= 0x01c10000,
-		.end	= 0x01c10000 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc1",
-		.start	= 0x01c10400,
-		.end	= 0x01c10400 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCERRINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* not using TC*_ERR */
-};
-
-static const struct platform_device_info dm644x_edma_device __initconst = {
-	.name		= "edma",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= edma_resources,
-	.num_res	= ARRAY_SIZE(edma_resources),
-	.data		= &dm644x_edma_pdata,
-	.size_data	= sizeof(dm644x_edma_pdata),
-};
-
-/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
-static struct resource dm644x_asp_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_ASP0_BASE,
-		.end	= DAVINCI_ASP0_BASE + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP0_TX,
-		.end	= DAVINCI_DMA_ASP0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP0_RX,
-		.end	= DAVINCI_DMA_ASP0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm644x_asp_device = {
-	.name		= "davinci-mcbsp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm644x_asp_resources),
-	.resource	= dm644x_asp_resources,
-};
-
-#define DM644X_VPSS_BASE	0x01c73400
-
-static struct resource dm644x_vpss_resources[] = {
-	{
-		/* VPSS Base address */
-		.name		= "vpss",
-		.start		= DM644X_VPSS_BASE,
-		.end		= DM644X_VPSS_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm644x_vpss_device = {
-	.name			= "vpss",
-	.id			= -1,
-	.dev.platform_data	= "dm644x_vpss",
-	.num_resources		= ARRAY_SIZE(dm644x_vpss_resources),
-	.resource		= dm644x_vpss_resources,
-};
-
-static struct resource dm644x_vpfe_resources[] = {
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.flags          = IORESOURCE_IRQ,
-	},
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 dm644x_video_dma_mask = DMA_BIT_MASK(32);
-static struct resource dm644x_ccdc_resource[] = {
-	/* CCDC Base address */
-	{
-		.start          = 0x01c70400,
-		.end            = 0x01c70400 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm644x_ccdc_dev = {
-	.name           = "dm644x_ccdc",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(dm644x_ccdc_resource),
-	.resource       = dm644x_ccdc_resource,
-	.dev = {
-		.dma_mask               = &dm644x_video_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
-static struct platform_device dm644x_vpfe_dev = {
-	.name		= CAPTURE_DRV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm644x_vpfe_resources),
-	.resource	= dm644x_vpfe_resources,
-	.dev = {
-		.dma_mask		= &dm644x_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-#define DM644X_OSD_BASE		0x01c72600
-
-static struct resource dm644x_osd_resources[] = {
-	{
-		.start	= DM644X_OSD_BASE,
-		.end	= DM644X_OSD_BASE + 0x1ff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm644x_osd_dev = {
-	.name		= DM644X_VPBE_OSD_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm644x_osd_resources),
-	.resource	= dm644x_osd_resources,
-	.dev		= {
-		.dma_mask		= &dm644x_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-#define DM644X_VENC_BASE		0x01c72400
-
-static struct resource dm644x_venc_resources[] = {
-	{
-		.start	= DM644X_VENC_BASE,
-		.end	= DM644X_VENC_BASE + 0x17f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-#define DM644X_VPSS_MUXSEL_PLL2_MODE          BIT(0)
-#define DM644X_VPSS_MUXSEL_VPBECLK_MODE       BIT(1)
-#define DM644X_VPSS_VENCLKEN                  BIT(3)
-#define DM644X_VPSS_DACCLKEN                  BIT(4)
-
-static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type,
-				   unsigned int pclock)
-{
-	int ret = 0;
-	u32 v = DM644X_VPSS_VENCLKEN;
-
-	switch (type) {
-	case VPBE_ENC_STD:
-		v |= DM644X_VPSS_DACCLKEN;
-		writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
-		break;
-	case VPBE_ENC_DV_TIMINGS:
-		if (pclock <= 27000000) {
-			v |= DM644X_VPSS_DACCLKEN;
-			writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
-		} else {
-			/*
-			 * For HD, use external clock source since
-			 * HD requires higher clock rate
-			 */
-			v |= DM644X_VPSS_MUXSEL_VPBECLK_MODE;
-			writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL));
-		}
-		break;
-	default:
-		ret  = -EINVAL;
-	}
-
-	return ret;
-}
-
-static struct resource dm644x_v4l2_disp_resources[] = {
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm644x_vpbe_display = {
-	.name		= "vpbe-v4l2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm644x_v4l2_disp_resources),
-	.resource	= dm644x_v4l2_disp_resources,
-	.dev		= {
-		.dma_mask		= &dm644x_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct venc_platform_data dm644x_venc_pdata = {
-	.setup_clock	= dm644x_venc_setup_clock,
-};
-
-static struct platform_device dm644x_venc_dev = {
-	.name		= DM644X_VPBE_VENC_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm644x_venc_resources),
-	.resource	= dm644x_venc_resources,
-	.dev		= {
-		.dma_mask		= &dm644x_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &dm644x_venc_pdata,
-	},
-};
-
-static struct platform_device dm644x_vpbe_dev = {
-	.name		= "vpbe_controller",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &dm644x_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm644_gpio_resources[] = {
-	{	/* registers */
-		.start	= DAVINCI_GPIO_BASE,
-		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{	/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK2),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK3),
-		.end	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK3),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK4),
-		.end	= DAVINCI_INTC_IRQ(IRQ_GPIOBNK4),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 71,
-};
-
-int __init dm644x_gpio_register(void)
-{
-	return davinci_gpio_register(dm644_gpio_resources,
-				     ARRAY_SIZE(dm644_gpio_resources),
-				     &dm644_gpio_platform_data);
-}
-/*----------------------------------------------------------------------*/
-
-static struct map_desc dm644x_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm644x_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb700,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM6446,
-		.name		= "dm6446",
-	},
-	{
-		.variant	= 0x1,
-		.part_no	= 0xb700,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM6446,
-		.name		= "dm6446a",
-	},
-};
-
-/*
- * Bottom half of timer0 is used for clockevent, top half is used for
- * clocksource.
- */
-static const struct davinci_timer_cfg dm644x_timer_cfg = {
-	.reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_4K),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
-	},
-};
-
-static struct plat_serial8250_port dm644x_serial0_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT0),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm644x_serial1_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART1_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT1),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm644x_serial2_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART2_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT2),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-
-struct platform_device dm644x_serial_device[] = {
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM,
-		.dev			= {
-			.platform_data	= dm644x_serial0_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM1,
-		.dev			= {
-			.platform_data	= dm644x_serial1_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM2,
-		.dev			= {
-			.platform_data	= dm644x_serial2_platform_data,
-		}
-	},
-	{
-	}
-};
-
-static const struct davinci_soc_info davinci_soc_info_dm644x = {
-	.io_desc		= dm644x_io_desc,
-	.io_desc_num		= ARRAY_SIZE(dm644x_io_desc),
-	.jtag_id_reg		= 0x01c40028,
-	.ids			= dm644x_ids,
-	.ids_num		= ARRAY_SIZE(dm644x_ids),
-	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
-	.pinmux_pins		= dm644x_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(dm644x_pins),
-	.emac_pdata		= &dm644x_emac_pdata,
-	.sram_dma		= 0x00008000,
-	.sram_len		= SZ_16K,
-};
-
-void __init dm644x_init_asp(void)
-{
-	davinci_cfg_reg(DM644X_MCBSP);
-	platform_device_register(&dm644x_asp_device);
-}
-
-void __init dm644x_init(void)
-{
-	davinci_common_init(&davinci_soc_info_dm644x);
-	davinci_map_sysmod();
-}
-
-void __init dm644x_init_time(void)
-{
-	void __iomem *pll1, *psc;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM644X_REF_FREQ);
-
-	pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
-	dm644x_pll1_init(NULL, pll1, NULL);
-
-	psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
-	dm644x_psc_init(NULL, psc);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &dm644x_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource dm644x_pll2_resources[] = {
-	{
-		.start	= DAVINCI_PLL2_BASE,
-		.end	= DAVINCI_PLL2_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm644x_pll2_device = {
-	.name		= "dm644x-pll2",
-	.id		= -1,
-	.resource	= dm644x_pll2_resources,
-	.num_resources	= ARRAY_SIZE(dm644x_pll2_resources),
-};
-
-void __init dm644x_register_clocks(void)
-{
-	/* PLL1 and PSC are registered in dm644x_init_time() */
-	platform_device_register(&dm644x_pll2_device);
-}
-
-int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
-				struct vpbe_config *vpbe_cfg)
-{
-	if (vpfe_cfg || vpbe_cfg)
-		platform_device_register(&dm644x_vpss_device);
-
-	if (vpfe_cfg) {
-		dm644x_vpfe_dev.dev.platform_data = vpfe_cfg;
-		platform_device_register(&dm644x_ccdc_dev);
-		platform_device_register(&dm644x_vpfe_dev);
-	}
-
-	if (vpbe_cfg) {
-		dm644x_vpbe_dev.dev.platform_data = vpbe_cfg;
-		platform_device_register(&dm644x_osd_dev);
-		platform_device_register(&dm644x_venc_dev);
-		platform_device_register(&dm644x_vpbe_dev);
-		platform_device_register(&dm644x_vpbe_display);
-	}
-
-	return 0;
-}
-
-static const struct davinci_aintc_config dm644x_aintc_config = {
-	.reg = {
-		.start		= DAVINCI_ARM_INTC_BASE,
-		.end		= DAVINCI_ARM_INTC_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= 64,
-	.prios			= dm644x_default_priorities,
-};
-
-void __init dm644x_init_irq(void)
-{
-	davinci_aintc_init(&dm644x_aintc_config);
-}
-
-void __init dm644x_init_devices(void)
-{
-	struct platform_device *edma_pdev;
-	int ret;
-
-	edma_pdev = platform_device_register_full(&dm644x_edma_device);
-	if (IS_ERR(edma_pdev))
-		pr_warn("%s: Failed to register eDMA\n", __func__);
-
-	platform_device_register(&dm644x_mdio_device);
-	platform_device_register(&dm644x_emac_device);
-
-	ret = davinci_init_wdt();
-	if (ret)
-		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
-
-}
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
deleted file mode 100644
index 4ffd028ed997..000000000000
--- a/arch/arm/mach-davinci/dm646x.c
+++ /dev/null
@@ -1,728 +0,0 @@
-/*
- * TI DaVinci DM646x chip specific setup
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-aintc.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/mux.h>
-#include <mach/serial.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include "asp.h"
-#include "davinci.h"
-#include "irqs.h"
-#include "mux.h"
-
-#define DAVINCI_VPIF_BASE       (0x01C12000)
-
-#define VDD3P3V_VID_MASK	(BIT_MASK(3) | BIT_MASK(2) | BIT_MASK(1) |\
-					BIT_MASK(0))
-#define VSCLKDIS_MASK		(BIT_MASK(11) | BIT_MASK(10) | BIT_MASK(9) |\
-					BIT_MASK(8))
-
-#define DM646X_EMAC_BASE		0x01c80000
-#define DM646X_EMAC_MDIO_BASE		(DM646X_EMAC_BASE + 0x4000)
-#define DM646X_EMAC_CNTRL_OFFSET	0x0000
-#define DM646X_EMAC_CNTRL_MOD_OFFSET	0x1000
-#define DM646X_EMAC_CNTRL_RAM_OFFSET	0x2000
-#define DM646X_EMAC_CNTRL_RAM_SIZE	0x2000
-
-static struct emac_platform_data dm646x_emac_pdata = {
-	.ctrl_reg_offset	= DM646X_EMAC_CNTRL_OFFSET,
-	.ctrl_mod_reg_offset	= DM646X_EMAC_CNTRL_MOD_OFFSET,
-	.ctrl_ram_offset	= DM646X_EMAC_CNTRL_RAM_OFFSET,
-	.ctrl_ram_size		= DM646X_EMAC_CNTRL_RAM_SIZE,
-	.version		= EMAC_VERSION_2,
-};
-
-static struct resource dm646x_emac_resources[] = {
-	{
-		.start	= DM646X_EMAC_BASE,
-		.end	= DM646X_EMAC_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXTHINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXTHINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM646X_EMACRXINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_EMACTXINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM646X_EMACTXINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_EMACMISCINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM646X_EMACMISCINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm646x_emac_device = {
-	.name		= "davinci_emac",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &dm646x_emac_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(dm646x_emac_resources),
-	.resource	= dm646x_emac_resources,
-};
-
-static struct resource dm646x_mdio_resources[] = {
-	{
-		.start	= DM646X_EMAC_MDIO_BASE,
-		.end	= DM646X_EMAC_MDIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm646x_mdio_device = {
-	.name		= "davinci_mdio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm646x_mdio_resources),
-	.resource	= dm646x_mdio_resources,
-};
-
-/*
- * Device specific mux setup
- *
- *	soc	description	mux  mode   mode  mux	 dbg
- *				reg  offset mask  mode
- */
-static const struct mux_config dm646x_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM646X, ATAEN,		0,   0,     5,	  1,	 true)
-
-MUX_CFG(DM646X, AUDCK1,		0,   29,    1,	  0,	 false)
-
-MUX_CFG(DM646X, AUDCK0,		0,   28,    1,	  0,	 false)
-
-MUX_CFG(DM646X, CRGMUX,			0,   24,    7,    5,	 true)
-
-MUX_CFG(DM646X, STSOMUX_DISABLE,	0,   22,    3,    0,	 true)
-
-MUX_CFG(DM646X, STSIMUX_DISABLE,	0,   20,    3,    0,	 true)
-
-MUX_CFG(DM646X, PTSOMUX_DISABLE,	0,   18,    3,    0,	 true)
-
-MUX_CFG(DM646X, PTSIMUX_DISABLE,	0,   16,    3,    0,	 true)
-
-MUX_CFG(DM646X, STSOMUX,		0,   22,    3,    2,	 true)
-
-MUX_CFG(DM646X, STSIMUX,		0,   20,    3,    2,	 true)
-
-MUX_CFG(DM646X, PTSOMUX_PARALLEL,	0,   18,    3,    2,	 true)
-
-MUX_CFG(DM646X, PTSIMUX_PARALLEL,	0,   16,    3,    2,	 true)
-
-MUX_CFG(DM646X, PTSOMUX_SERIAL,		0,   18,    3,    3,	 true)
-
-MUX_CFG(DM646X, PTSIMUX_SERIAL,		0,   16,    3,    3,	 true)
-#endif
-};
-
-static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_DM646X_VP_VERTINT0]        = 7,
-	[IRQ_DM646X_VP_VERTINT1]        = 7,
-	[IRQ_DM646X_VP_VERTINT2]        = 7,
-	[IRQ_DM646X_VP_VERTINT3]        = 7,
-	[IRQ_DM646X_VP_ERRINT]          = 7,
-	[IRQ_DM646X_RESERVED_1]         = 7,
-	[IRQ_DM646X_RESERVED_2]         = 7,
-	[IRQ_DM646X_WDINT]              = 7,
-	[IRQ_DM646X_CRGENINT0]          = 7,
-	[IRQ_DM646X_CRGENINT1]          = 7,
-	[IRQ_DM646X_TSIFINT0]           = 7,
-	[IRQ_DM646X_TSIFINT1]           = 7,
-	[IRQ_DM646X_VDCEINT]            = 7,
-	[IRQ_DM646X_USBINT]             = 7,
-	[IRQ_DM646X_USBDMAINT]          = 7,
-	[IRQ_DM646X_PCIINT]             = 7,
-	[IRQ_CCINT0]                    = 7,    /* dma */
-	[IRQ_CCERRINT]                  = 7,    /* dma */
-	[IRQ_TCERRINT0]                 = 7,    /* dma */
-	[IRQ_TCERRINT]                  = 7,    /* dma */
-	[IRQ_DM646X_TCERRINT2]          = 7,
-	[IRQ_DM646X_TCERRINT3]          = 7,
-	[IRQ_DM646X_IDE]                = 7,
-	[IRQ_DM646X_HPIINT]             = 7,
-	[IRQ_DM646X_EMACRXTHINT]        = 7,
-	[IRQ_DM646X_EMACRXINT]          = 7,
-	[IRQ_DM646X_EMACTXINT]          = 7,
-	[IRQ_DM646X_EMACMISCINT]        = 7,
-	[IRQ_DM646X_MCASP0TXINT]        = 7,
-	[IRQ_DM646X_MCASP0RXINT]        = 7,
-	[IRQ_DM646X_RESERVED_3]         = 7,
-	[IRQ_DM646X_MCASP1TXINT]        = 7,
-	[IRQ_TINT0_TINT12]              = 7,    /* clockevent */
-	[IRQ_TINT0_TINT34]              = 7,    /* clocksource */
-	[IRQ_TINT1_TINT12]              = 7,    /* DSP timer */
-	[IRQ_TINT1_TINT34]              = 7,    /* system tick */
-	[IRQ_PWMINT0]                   = 7,
-	[IRQ_PWMINT1]                   = 7,
-	[IRQ_DM646X_VLQINT]             = 7,
-	[IRQ_I2C]                       = 7,
-	[IRQ_UARTINT0]                  = 7,
-	[IRQ_UARTINT1]                  = 7,
-	[IRQ_DM646X_UARTINT2]           = 7,
-	[IRQ_DM646X_SPINT0]             = 7,
-	[IRQ_DM646X_SPINT1]             = 7,
-	[IRQ_DM646X_DSP2ARMINT]         = 7,
-	[IRQ_DM646X_RESERVED_4]         = 7,
-	[IRQ_DM646X_PSCINT]             = 7,
-	[IRQ_DM646X_GPIO0]              = 7,
-	[IRQ_DM646X_GPIO1]              = 7,
-	[IRQ_DM646X_GPIO2]              = 7,
-	[IRQ_DM646X_GPIO3]              = 7,
-	[IRQ_DM646X_GPIO4]              = 7,
-	[IRQ_DM646X_GPIO5]              = 7,
-	[IRQ_DM646X_GPIO6]              = 7,
-	[IRQ_DM646X_GPIO7]              = 7,
-	[IRQ_DM646X_GPIOBNK0]           = 7,
-	[IRQ_DM646X_GPIOBNK1]           = 7,
-	[IRQ_DM646X_GPIOBNK2]           = 7,
-	[IRQ_DM646X_DDRINT]             = 7,
-	[IRQ_DM646X_AEMIFINT]           = 7,
-	[IRQ_COMMTX]                    = 7,
-	[IRQ_COMMRX]                    = 7,
-	[IRQ_EMUINT]                    = 7,
-};
-
-/*----------------------------------------------------------------------*/
-
-/* Four Transfer Controllers on DM646x */
-static s8 dm646x_queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 4},
-	{1, 0},
-	{2, 5},
-	{3, 1},
-	{-1, -1},
-};
-
-static const struct dma_slave_map dm646x_edma_map[] = {
-	{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 6) },
-	{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 9) },
-	{ "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 12) },
-	{ "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) },
-	{ "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) },
-};
-
-static struct edma_soc_info dm646x_edma_pdata = {
-	.queue_priority_mapping	= dm646x_queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
-	.slave_map		= dm646x_edma_map,
-	.slavecnt		= ARRAY_SIZE(dm646x_edma_map),
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= 0x01c00000,
-		.end	= 0x01c00000 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= 0x01c10000,
-		.end	= 0x01c10000 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc1",
-		.start	= 0x01c10400,
-		.end	= 0x01c10400 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc2",
-		.start	= 0x01c10800,
-		.end	= 0x01c10800 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc3",
-		.start	= 0x01c10c00,
-		.end	= 0x01c10c00 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCERRINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* not using TC*_ERR */
-};
-
-static const struct platform_device_info dm646x_edma_device __initconst = {
-	.name		= "edma",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= edma_resources,
-	.num_res	= ARRAY_SIZE(edma_resources),
-	.data		= &dm646x_edma_pdata,
-	.size_data	= sizeof(dm646x_edma_pdata),
-};
-
-static struct resource dm646x_mcasp0_resources[] = {
-	{
-		.name	= "mpu",
-		.start 	= DAVINCI_DM646X_MCASP0_REG_BASE,
-		.end 	= DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
-		.flags 	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "tx",
-		.start	= DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
-		.end	= DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.name	= "rx",
-		.start	= DAVINCI_DM646X_DMA_MCASP0_AREVT0,
-		.end	= DAVINCI_DM646X_DMA_MCASP0_AREVT0,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.name	= "tx",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_MCASP0TXINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "rx",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_MCASP0RXINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-/* DIT mode only, rx is not supported */
-static struct resource dm646x_mcasp1_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_DM646X_MCASP1_REG_BASE,
-		.end	= DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "tx",
-		.start	= DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
-		.end	= DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.name	= "tx",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_MCASP1TXINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm646x_mcasp0_device = {
-	.name		= "davinci-mcasp",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm646x_mcasp0_resources),
-	.resource	= dm646x_mcasp0_resources,
-};
-
-static struct platform_device dm646x_mcasp1_device = {
-	.name		= "davinci-mcasp",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(dm646x_mcasp1_resources),
-	.resource	= dm646x_mcasp1_resources,
-};
-
-static struct platform_device dm646x_dit_device = {
-	.name	= "spdif-dit",
-	.id	= -1,
-};
-
-static u64 vpif_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource vpif_resource[] = {
-	{
-		.start	= DAVINCI_VPIF_BASE,
-		.end	= DAVINCI_VPIF_BASE + 0x03ff,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device vpif_dev = {
-	.name		= "vpif",
-	.id		= -1,
-	.dev		= {
-			.dma_mask 		= &vpif_dma_mask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= vpif_resource,
-	.num_resources	= ARRAY_SIZE(vpif_resource),
-};
-
-static struct resource vpif_display_resource[] = {
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT2),
-		.end   = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT2),
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT3),
-		.end   = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT3),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device vpif_display_dev = {
-	.name		= "vpif_display",
-	.id		= -1,
-	.dev		= {
-			.dma_mask 		= &vpif_dma_mask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= vpif_display_resource,
-	.num_resources	= ARRAY_SIZE(vpif_display_resource),
-};
-
-static struct resource vpif_capture_resource[] = {
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT0),
-		.end   = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT0),
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT1),
-		.end   = DAVINCI_INTC_IRQ(IRQ_DM646X_VP_VERTINT1),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device vpif_capture_dev = {
-	.name		= "vpif_capture",
-	.id		= -1,
-	.dev		= {
-			.dma_mask 		= &vpif_dma_mask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= vpif_capture_resource,
-	.num_resources	= ARRAY_SIZE(vpif_capture_resource),
-};
-
-static struct resource dm646x_gpio_resources[] = {
-	{	/* registers */
-		.start	= DAVINCI_GPIO_BASE,
-		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{	/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM646X_GPIOBNK2),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 43,
-};
-
-int __init dm646x_gpio_register(void)
-{
-	return davinci_gpio_register(dm646x_gpio_resources,
-				     ARRAY_SIZE(dm646x_gpio_resources),
-				     &dm646x_gpio_platform_data);
-}
-/*----------------------------------------------------------------------*/
-
-static struct map_desc dm646x_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm646x_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb770,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM6467,
-		.name		= "dm6467_rev1.x",
-	},
-	{
-		.variant	= 0x1,
-		.part_no	= 0xb770,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM6467,
-		.name		= "dm6467_rev3.x",
-	},
-};
-
-/*
- * Bottom half of timer0 is used for clockevent, top half is used for
- * clocksource.
- */
-static const struct davinci_timer_cfg dm646x_timer_cfg = {
-	.reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_4K),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
-	},
-};
-
-static struct plat_serial8250_port dm646x_serial0_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT0),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm646x_serial1_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART1_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT1),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm646x_serial2_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART2_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_DM646X_UARTINT2),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-
-struct platform_device dm646x_serial_device[] = {
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM,
-		.dev			= {
-			.platform_data	= dm646x_serial0_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM1,
-		.dev			= {
-			.platform_data	= dm646x_serial1_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM2,
-		.dev			= {
-			.platform_data	= dm646x_serial2_platform_data,
-		}
-	},
-	{
-	}
-};
-
-static const struct davinci_soc_info davinci_soc_info_dm646x = {
-	.io_desc		= dm646x_io_desc,
-	.io_desc_num		= ARRAY_SIZE(dm646x_io_desc),
-	.jtag_id_reg		= 0x01c40028,
-	.ids			= dm646x_ids,
-	.ids_num		= ARRAY_SIZE(dm646x_ids),
-	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
-	.pinmux_pins		= dm646x_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(dm646x_pins),
-	.emac_pdata		= &dm646x_emac_pdata,
-	.sram_dma		= 0x10010000,
-	.sram_len		= SZ_32K,
-};
-
-void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)
-{
-	dm646x_mcasp0_device.dev.platform_data = pdata;
-	platform_device_register(&dm646x_mcasp0_device);
-}
-
-void __init dm646x_init_mcasp1(struct snd_platform_data *pdata)
-{
-	dm646x_mcasp1_device.dev.platform_data = pdata;
-	platform_device_register(&dm646x_mcasp1_device);
-	platform_device_register(&dm646x_dit_device);
-}
-
-void dm646x_setup_vpif(struct vpif_display_config *display_config,
-		       struct vpif_capture_config *capture_config)
-{
-	unsigned int value;
-
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-	value &= ~VSCLKDIS_MASK;
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
-
-	value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
-	value &= ~VDD3P3V_VID_MASK;
-	__raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
-
-	davinci_cfg_reg(DM646X_STSOMUX_DISABLE);
-	davinci_cfg_reg(DM646X_STSIMUX_DISABLE);
-	davinci_cfg_reg(DM646X_PTSOMUX_DISABLE);
-	davinci_cfg_reg(DM646X_PTSIMUX_DISABLE);
-
-	vpif_display_dev.dev.platform_data = display_config;
-	vpif_capture_dev.dev.platform_data = capture_config;
-	platform_device_register(&vpif_dev);
-	platform_device_register(&vpif_display_dev);
-	platform_device_register(&vpif_capture_dev);
-}
-
-int __init dm646x_init_edma(struct edma_rsv_info *rsv)
-{
-	struct platform_device *edma_pdev;
-
-	dm646x_edma_pdata.rsv = rsv;
-
-	edma_pdev = platform_device_register_full(&dm646x_edma_device);
-	return PTR_ERR_OR_ZERO(edma_pdev);
-}
-
-void __init dm646x_init(void)
-{
-	davinci_common_init(&davinci_soc_info_dm646x);
-	davinci_map_sysmod();
-}
-
-void __init dm646x_init_time(unsigned long ref_clk_rate,
-			     unsigned long aux_clkin_rate)
-{
-	void __iomem *pll1, *psc;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, ref_clk_rate);
-	clk_register_fixed_rate(NULL, "aux_clkin", NULL, 0, aux_clkin_rate);
-
-	pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
-	dm646x_pll1_init(NULL, pll1, NULL);
-
-	psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
-	dm646x_psc_init(NULL, psc);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &dm646x_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource dm646x_pll2_resources[] = {
-	{
-		.start	= DAVINCI_PLL2_BASE,
-		.end	= DAVINCI_PLL2_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm646x_pll2_device = {
-	.name		= "dm646x-pll2",
-	.id		= -1,
-	.resource	= dm646x_pll2_resources,
-	.num_resources	= ARRAY_SIZE(dm646x_pll2_resources),
-};
-
-void __init dm646x_register_clocks(void)
-{
-	/* PLL1 and PSC are registered in dm646x_init_time() */
-	platform_device_register(&dm646x_pll2_device);
-}
-
-static const struct davinci_aintc_config dm646x_aintc_config = {
-	.reg = {
-		.start		= DAVINCI_ARM_INTC_BASE,
-		.end		= DAVINCI_ARM_INTC_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= 64,
-	.prios			= dm646x_default_priorities,
-};
-
-void __init dm646x_init_irq(void)
-{
-	davinci_aintc_init(&dm646x_aintc_config);
-}
-
-static int __init dm646x_init_devices(void)
-{
-	int ret = 0;
-
-	if (!cpu_is_davinci_dm646x())
-		return 0;
-
-	platform_device_register(&dm646x_mdio_device);
-	platform_device_register(&dm646x_emac_device);
-
-	ret = davinci_init_wdt();
-	if (ret)
-		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
-
-	return ret;
-}
-postcore_initcall(dm646x_init_devices);
diff --git a/arch/arm/mach-davinci/hardware.h b/arch/arm/mach-davinci/hardware.h
new file mode 100644
index 000000000000..7848b6a240b4
--- /dev/null
+++ b/arch/arm/mach-davinci/hardware.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Hardware definitions common to all DaVinci family processors
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * Before you add anything to ths file:
+ *
+ * This header is for defines common to ALL DaVinci family chips.
+ * Anything that is chip specific should go in <chipname>.h,
+ * and the chip/board init code should then explicitly include
+ * <chipname>.h
+ */
+/*
+ * I/O mapping
+ */
+#define IO_PHYS				UL(0x01c00000)
+#define IO_OFFSET			0xfd000000 /* Virtual IO = 0xfec00000 */
+#define IO_SIZE				0x00400000
+#define IO_VIRT				(IO_PHYS + IO_OFFSET)
+#define io_v2p(va)			((va) - IO_OFFSET)
+#define __IO_ADDRESS(x)			((x) + IO_OFFSET)
+#define IO_ADDRESS(pa)			IOMEM(__IO_ADDRESS(pa))
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
deleted file mode 100644
index 139b83de011d..000000000000
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Header for code common to all DaVinci machines.
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ARCH_ARM_MACH_DAVINCI_COMMON_H
-#define __ARCH_ARM_MACH_DAVINCI_COMMON_H
-
-#include <linux/clk.h>
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <linux/reboot.h>
-
-#include <asm/irq.h>
-
-#define DAVINCI_INTC_START		NR_IRQS
-#define DAVINCI_INTC_IRQ(_irqnum)	(DAVINCI_INTC_START + (_irqnum))
-
-struct davinci_gpio_controller;
-
-/*
- * SoC info passed into common davinci modules.
- *
- * Base addresses in this structure should be physical and not virtual.
- * Modules that take such base addresses, should internally ioremap() them to
- * use.
- */
-struct davinci_soc_info {
-	struct map_desc			*io_desc;
-	unsigned long			io_desc_num;
-	u32				cpu_id;
-	u32				jtag_id;
-	u32				jtag_id_reg;
-	struct davinci_id		*ids;
-	unsigned long			ids_num;
-	u32				pinmux_base;
-	const struct mux_config		*pinmux_pins;
-	unsigned long			pinmux_pins_num;
-	int				gpio_type;
-	u32				gpio_base;
-	unsigned			gpio_num;
-	unsigned			gpio_irq;
-	unsigned			gpio_unbanked;
-	struct davinci_gpio_controller	*gpio_ctlrs;
-	int				gpio_ctlrs_num;
-	struct emac_platform_data	*emac_pdata;
-	dma_addr_t			sram_dma;
-	unsigned			sram_len;
-};
-
-extern struct davinci_soc_info davinci_soc_info;
-
-extern void davinci_common_init(const struct davinci_soc_info *soc_info);
-extern void davinci_init_ide(void);
-void davinci_init_late(void);
-
-#ifdef CONFIG_CPU_FREQ
-int davinci_cpufreq_init(void);
-#else
-static inline int davinci_cpufreq_init(void) { return 0; }
-#endif
-
-#ifdef CONFIG_SUSPEND
-int davinci_pm_init(void);
-#else
-static inline int davinci_pm_init(void) { return 0; }
-#endif
-
-void __init pdata_quirks_init(void);
-
-#define SRAM_SIZE	SZ_128K
-
-#endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
deleted file mode 100644
index 1fc84e21664d..000000000000
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * DaVinci CPU type detection
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * Defines the cpu_is_*() macros for runtime detection of DaVinci
- * device type.  In addition, if support for a given device is not
- * compiled in to the kernel, the macros return 0 so that
- * resulting code can be optimized out.
- *
- * 2009 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef _ASM_ARCH_CPU_H
-#define _ASM_ARCH_CPU_H
-
-#include <mach/common.h>
-
-struct davinci_id {
-	u8	variant;	/* JTAG ID bits 31:28 */
-	u16	part_no;	/* JTAG ID bits 27:12 */
-	u16	manufacturer;	/* JTAG ID bits 11:1 */
-	u32	cpu_id;
-	char	*name;
-};
-
-/* Can use lower 16 bits of cpu id  for a variant when required */
-#define	DAVINCI_CPU_ID_DM6446		0x64460000
-#define	DAVINCI_CPU_ID_DM6467		0x64670000
-#define	DAVINCI_CPU_ID_DM355		0x03550000
-#define	DAVINCI_CPU_ID_DM365		0x03650000
-#define	DAVINCI_CPU_ID_DA830		0x08300000
-#define	DAVINCI_CPU_ID_DA850		0x08500000
-
-#define IS_DAVINCI_CPU(type, id)					\
-static inline int is_davinci_ ##type(void)				\
-{									\
-	return (davinci_soc_info.cpu_id == (id));			\
-}
-
-IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
-IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
-IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
-IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
-IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
-IS_DAVINCI_CPU(da850, DAVINCI_CPU_ID_DA850)
-
-#ifdef CONFIG_ARCH_DAVINCI_DM644x
-#define cpu_is_davinci_dm644x() is_davinci_dm644x()
-#else
-#define cpu_is_davinci_dm644x() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DM646x
-#define cpu_is_davinci_dm646x() is_davinci_dm646x()
-#else
-#define cpu_is_davinci_dm646x() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DM355
-#define cpu_is_davinci_dm355() is_davinci_dm355()
-#else
-#define cpu_is_davinci_dm355() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DM365
-#define cpu_is_davinci_dm365() is_davinci_dm365()
-#else
-#define cpu_is_davinci_dm365() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DA830
-#define cpu_is_davinci_da830() is_davinci_da830()
-#else
-#define cpu_is_davinci_da830() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DA850
-#define cpu_is_davinci_da850() is_davinci_da850()
-#else
-#define cpu_is_davinci_da850() 0
-#endif
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
deleted file mode 100644
index 1618b30661a9..000000000000
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Chip specific defines for DA8XX/OMAP L1XX SoC
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_DAVINCI_DA8XX_H
-#define __ASM_ARCH_DAVINCI_DA8XX_H
-
-#include <video/da8xx-fb.h>
-
-#include <linux/platform_device.h>
-#include <linux/davinci_emac.h>
-#include <linux/spi/spi.h>
-#include <linux/platform_data/davinci_asp.h>
-#include <linux/reboot.h>
-#include <linux/regmap.h>
-#include <linux/videodev2.h>
-
-#include <mach/serial.h>
-#include <mach/pm.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_data/uio_pruss.h>
-
-#include <media/davinci/vpif_types.h>
-
-extern void __iomem *da8xx_syscfg0_base;
-extern void __iomem *da8xx_syscfg1_base;
-
-/*
- * If the DA850/OMAP-L138/AM18x SoC on board is of a higher speed grade
- * (than the regular 300MHz variant), the board code should set this up
- * with the supported speed before calling da850_register_cpufreq().
- */
-extern unsigned int da850_max_speed;
-
-/*
- * The cp_intc interrupt controller for the da8xx isn't in the same
- * chunk of physical memory space as the other registers (like it is
- * on the davincis) so it needs to be mapped separately.  It will be
- * mapped early on when the I/O space is mapped and we'll put it just
- * before the I/O space in the processor's virtual memory space.
- */
-#define DA8XX_CP_INTC_BASE	0xfffee000
-#define DA8XX_CP_INTC_SIZE	SZ_8K
-#define DA8XX_CP_INTC_VIRT	(IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
-
-#define DA8XX_SYSCFG0_BASE	(IO_PHYS + 0x14000)
-#define DA8XX_SYSCFG0_VIRT(x)	(da8xx_syscfg0_base + (x))
-#define DA8XX_JTAG_ID_REG	0x18
-#define DA8XX_HOST1CFG_REG	0x44
-#define DA8XX_CHIPSIG_REG	0x174
-#define DA8XX_CFGCHIP0_REG	0x17c
-#define DA8XX_CFGCHIP1_REG	0x180
-#define DA8XX_CFGCHIP2_REG	0x184
-#define DA8XX_CFGCHIP3_REG	0x188
-#define DA8XX_CFGCHIP4_REG	0x18c
-
-#define DA8XX_SYSCFG1_BASE	(IO_PHYS + 0x22C000)
-#define DA8XX_SYSCFG1_VIRT(x)	(da8xx_syscfg1_base + (x))
-#define DA8XX_DEEPSLEEP_REG	0x8
-#define DA8XX_PWRDN_REG		0x18
-
-#define DA8XX_PSC0_BASE		0x01c10000
-#define DA8XX_PLL0_BASE		0x01c11000
-#define DA8XX_TIMER64P0_BASE	0x01c20000
-#define DA8XX_TIMER64P1_BASE	0x01c21000
-#define DA8XX_VPIF_BASE		0x01e17000
-#define DA8XX_GPIO_BASE		0x01e26000
-#define DA8XX_PSC1_BASE		0x01e27000
-
-#define DA8XX_DSP_L2_RAM_BASE	0x11800000
-#define DA8XX_DSP_L1P_RAM_BASE	(DA8XX_DSP_L2_RAM_BASE + 0x600000)
-#define DA8XX_DSP_L1D_RAM_BASE	(DA8XX_DSP_L2_RAM_BASE + 0x700000)
-
-#define DA8XX_AEMIF_CS2_BASE	0x60000000
-#define DA8XX_AEMIF_CS3_BASE	0x62000000
-#define DA8XX_AEMIF_CTL_BASE	0x68000000
-#define DA8XX_SHARED_RAM_BASE	0x80000000
-#define DA8XX_ARM_RAM_BASE	0xffff0000
-
-void da830_init(void);
-void da830_init_irq(void);
-void da830_init_time(void);
-void da830_register_clocks(void);
-
-void da850_init(void);
-void da850_init_irq(void);
-void da850_init_time(void);
-void da850_register_clocks(void);
-
-int da830_register_edma(struct edma_rsv_info *rsv);
-int da850_register_edma(struct edma_rsv_info *rsv[2]);
-int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
-int da8xx_register_spi_bus(int instance, unsigned num_chipselect);
-int da8xx_register_watchdog(void);
-int da8xx_register_usb_phy(void);
-int da8xx_register_usb20(unsigned mA, unsigned potpgt);
-int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
-int da8xx_register_usb_phy_clocks(void);
-int da850_register_sata_refclk(int rate);
-int da8xx_register_emac(void);
-int da8xx_register_uio_pruss(void);
-int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
-int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
-int da850_register_mmcsd1(struct davinci_mmc_config *config);
-void da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
-int da8xx_register_rtc(void);
-int da8xx_register_gpio(void *pdata);
-int da850_register_cpufreq(char *async_clk);
-int da8xx_register_cpuidle(void);
-void __iomem *da8xx_get_mem_ctlr(void);
-int da850_register_sata(unsigned long refclkpn);
-int da850_register_vpif(void);
-int da850_register_vpif_display
-			(struct vpif_display_config *display_config);
-int da850_register_vpif_capture
-			(struct vpif_capture_config *capture_config);
-void da8xx_rproc_reserve_cma(void);
-int da8xx_register_rproc(void);
-int da850_register_gpio(void);
-int da830_register_gpio(void);
-struct regmap *da8xx_get_cfgchip(void);
-
-extern struct platform_device da8xx_serial_device[];
-extern struct emac_platform_data da8xx_emac_pdata;
-extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
-extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
-
-
-extern const short da830_emif25_pins[];
-extern const short da830_spi0_pins[];
-extern const short da830_spi1_pins[];
-extern const short da830_mmc_sd_pins[];
-extern const short da830_uart0_pins[];
-extern const short da830_uart1_pins[];
-extern const short da830_uart2_pins[];
-extern const short da830_usb20_pins[];
-extern const short da830_usb11_pins[];
-extern const short da830_uhpi_pins[];
-extern const short da830_cpgmac_pins[];
-extern const short da830_emif3c_pins[];
-extern const short da830_mcasp0_pins[];
-extern const short da830_mcasp1_pins[];
-extern const short da830_mcasp2_pins[];
-extern const short da830_i2c0_pins[];
-extern const short da830_i2c1_pins[];
-extern const short da830_lcdcntl_pins[];
-extern const short da830_pwm_pins[];
-extern const short da830_ecap0_pins[];
-extern const short da830_ecap1_pins[];
-extern const short da830_ecap2_pins[];
-extern const short da830_eqep0_pins[];
-extern const short da830_eqep1_pins[];
-extern const short da850_vpif_capture_pins[];
-extern const short da850_vpif_display_pins[];
-
-extern const short da850_i2c0_pins[];
-extern const short da850_i2c1_pins[];
-extern const short da850_lcdcntl_pins[];
-
-#endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
deleted file mode 100644
index 16bb42291d39..000000000000
--- a/arch/arm/mach-davinci/include/mach/hardware.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Hardware definitions common to all DaVinci family processors
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * Before you add anything to ths file:
- *
- * This header is for defines common to ALL DaVinci family chips.
- * Anything that is chip specific should go in <chipname>.h,
- * and the chip/board init code should then explicitly include
- * <chipname>.h
- */
-/*
- * I/O mapping
- */
-#define IO_PHYS				UL(0x01c00000)
-#define IO_OFFSET			0xfd000000 /* Virtual IO = 0xfec00000 */
-#define IO_SIZE				0x00400000
-#define IO_VIRT				(IO_PHYS + IO_OFFSET)
-#define io_v2p(va)			((va) - IO_OFFSET)
-#define __IO_ADDRESS(x)			((x) + IO_OFFSET)
-#define IO_ADDRESS(pa)			IOMEM(__IO_ADDRESS(pa))
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
deleted file mode 100644
index 631655e68ae0..000000000000
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ /dev/null
@@ -1,990 +0,0 @@
-/*
- * Table of the DAVINCI register configurations for the PINMUX combinations
- *
- * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
- *
- * Based on linux/include/asm-arm/arch-omap/mux.h:
- * Copyright (C) 2003 - 2005 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Copyright (C) 2008 Texas Instruments.
- */
-
-#ifndef __INC_MACH_MUX_H
-#define __INC_MACH_MUX_H
-
-struct mux_config {
-	const char *name;
-	const char *mux_reg_name;
-	const unsigned char mux_reg;
-	const unsigned char mask_offset;
-	const unsigned char mask;
-	const unsigned char mode;
-	bool debug;
-};
-
-enum davinci_dm644x_index {
-	/* ATA and HDDIR functions */
-	DM644X_HDIREN,
-	DM644X_ATAEN,
-	DM644X_ATAEN_DISABLE,
-
-	/* HPI functions */
-	DM644X_HPIEN_DISABLE,
-
-	/* AEAW functions */
-	DM644X_AEAW,
-	DM644X_AEAW0,
-	DM644X_AEAW1,
-	DM644X_AEAW2,
-	DM644X_AEAW3,
-	DM644X_AEAW4,
-
-	/* Memory Stick */
-	DM644X_MSTK,
-
-	/* I2C */
-	DM644X_I2C,
-
-	/* ASP function */
-	DM644X_MCBSP,
-
-	/* UART1 */
-	DM644X_UART1,
-
-	/* UART2 */
-	DM644X_UART2,
-
-	/* PWM0 */
-	DM644X_PWM0,
-
-	/* PWM1 */
-	DM644X_PWM1,
-
-	/* PWM2 */
-	DM644X_PWM2,
-
-	/* VLYNQ function */
-	DM644X_VLYNQEN,
-	DM644X_VLSCREN,
-	DM644X_VLYNQWD,
-
-	/* EMAC and MDIO function */
-	DM644X_EMACEN,
-
-	/* GPIO3V[0:16] pins */
-	DM644X_GPIO3V,
-
-	/* GPIO pins */
-	DM644X_GPIO0,
-	DM644X_GPIO3,
-	DM644X_GPIO43_44,
-	DM644X_GPIO46_47,
-
-	/* VPBE */
-	DM644X_RGB666,
-
-	/* LCD */
-	DM644X_LOEEN,
-	DM644X_LFLDEN,
-};
-
-enum davinci_dm646x_index {
-	/* ATA function */
-	DM646X_ATAEN,
-
-	/* AUDIO Clock */
-	DM646X_AUDCK1,
-	DM646X_AUDCK0,
-
-	/* CRGEN Control */
-	DM646X_CRGMUX,
-
-	/* VPIF Control */
-	DM646X_STSOMUX_DISABLE,
-	DM646X_STSIMUX_DISABLE,
-	DM646X_PTSOMUX_DISABLE,
-	DM646X_PTSIMUX_DISABLE,
-
-	/* TSIF Control */
-	DM646X_STSOMUX,
-	DM646X_STSIMUX,
-	DM646X_PTSOMUX_PARALLEL,
-	DM646X_PTSIMUX_PARALLEL,
-	DM646X_PTSOMUX_SERIAL,
-	DM646X_PTSIMUX_SERIAL,
-};
-
-enum davinci_dm355_index {
-	/* MMC/SD 0 */
-	DM355_MMCSD0,
-
-	/* MMC/SD 1 */
-	DM355_SD1_CLK,
-	DM355_SD1_CMD,
-	DM355_SD1_DATA3,
-	DM355_SD1_DATA2,
-	DM355_SD1_DATA1,
-	DM355_SD1_DATA0,
-
-	/* I2C */
-	DM355_I2C_SDA,
-	DM355_I2C_SCL,
-
-	/* ASP0 function */
-	DM355_MCBSP0_BDX,
-	DM355_MCBSP0_X,
-	DM355_MCBSP0_BFSX,
-	DM355_MCBSP0_BDR,
-	DM355_MCBSP0_R,
-	DM355_MCBSP0_BFSR,
-
-	/* SPI0 */
-	DM355_SPI0_SDI,
-	DM355_SPI0_SDENA0,
-	DM355_SPI0_SDENA1,
-
-	/* IRQ muxing */
-	DM355_INT_EDMA_CC,
-	DM355_INT_EDMA_TC0_ERR,
-	DM355_INT_EDMA_TC1_ERR,
-
-	/* EDMA event muxing */
-	DM355_EVT8_ASP1_TX,
-	DM355_EVT9_ASP1_RX,
-	DM355_EVT26_MMC0_RX,
-
-	/* Video Out */
-	DM355_VOUT_FIELD,
-	DM355_VOUT_FIELD_G70,
-	DM355_VOUT_HVSYNC,
-	DM355_VOUT_COUTL_EN,
-	DM355_VOUT_COUTH_EN,
-
-	/* Video In Pin Mux */
-	DM355_VIN_PCLK,
-	DM355_VIN_CAM_WEN,
-	DM355_VIN_CAM_VD,
-	DM355_VIN_CAM_HD,
-	DM355_VIN_YIN_EN,
-	DM355_VIN_CINL_EN,
-	DM355_VIN_CINH_EN,
-};
-
-enum davinci_dm365_index {
-	/* MMC/SD 0 */
-	DM365_MMCSD0,
-
-	/* MMC/SD 1 */
-	DM365_SD1_CLK,
-	DM365_SD1_CMD,
-	DM365_SD1_DATA3,
-	DM365_SD1_DATA2,
-	DM365_SD1_DATA1,
-	DM365_SD1_DATA0,
-
-	/* I2C */
-	DM365_I2C_SDA,
-	DM365_I2C_SCL,
-
-	/* AEMIF */
-	DM365_AEMIF_AR_A14,
-	DM365_AEMIF_AR_BA0,
-	DM365_AEMIF_A3,
-	DM365_AEMIF_A7,
-	DM365_AEMIF_D15_8,
-	DM365_AEMIF_CE0,
-	DM365_AEMIF_CE1,
-	DM365_AEMIF_WE_OE,
-
-	/* ASP0 function */
-	DM365_MCBSP0_BDX,
-	DM365_MCBSP0_X,
-	DM365_MCBSP0_BFSX,
-	DM365_MCBSP0_BDR,
-	DM365_MCBSP0_R,
-	DM365_MCBSP0_BFSR,
-
-	/* SPI0 */
-	DM365_SPI0_SCLK,
-	DM365_SPI0_SDI,
-	DM365_SPI0_SDO,
-	DM365_SPI0_SDENA0,
-	DM365_SPI0_SDENA1,
-
-	/* UART */
-	DM365_UART0_RXD,
-	DM365_UART0_TXD,
-	DM365_UART1_RXD,
-	DM365_UART1_TXD,
-	DM365_UART1_RTS,
-	DM365_UART1_CTS,
-
-	/* EMAC */
-	DM365_EMAC_TX_EN,
-	DM365_EMAC_TX_CLK,
-	DM365_EMAC_COL,
-	DM365_EMAC_TXD3,
-	DM365_EMAC_TXD2,
-	DM365_EMAC_TXD1,
-	DM365_EMAC_TXD0,
-	DM365_EMAC_RXD3,
-	DM365_EMAC_RXD2,
-	DM365_EMAC_RXD1,
-	DM365_EMAC_RXD0,
-	DM365_EMAC_RX_CLK,
-	DM365_EMAC_RX_DV,
-	DM365_EMAC_RX_ER,
-	DM365_EMAC_CRS,
-	DM365_EMAC_MDIO,
-	DM365_EMAC_MDCLK,
-
-	/* Key Scan */
-	DM365_KEYSCAN,
-
-	/* PWM */
-	DM365_PWM0,
-	DM365_PWM0_G23,
-	DM365_PWM1,
-	DM365_PWM1_G25,
-	DM365_PWM2_G87,
-	DM365_PWM2_G88,
-	DM365_PWM2_G89,
-	DM365_PWM2_G90,
-	DM365_PWM3_G80,
-	DM365_PWM3_G81,
-	DM365_PWM3_G85,
-	DM365_PWM3_G86,
-
-	/* SPI1 */
-	DM365_SPI1_SCLK,
-	DM365_SPI1_SDO,
-	DM365_SPI1_SDI,
-	DM365_SPI1_SDENA0,
-	DM365_SPI1_SDENA1,
-
-	/* SPI2 */
-	DM365_SPI2_SCLK,
-	DM365_SPI2_SDO,
-	DM365_SPI2_SDI,
-	DM365_SPI2_SDENA0,
-	DM365_SPI2_SDENA1,
-
-	/* SPI3 */
-	DM365_SPI3_SCLK,
-	DM365_SPI3_SDO,
-	DM365_SPI3_SDI,
-	DM365_SPI3_SDENA0,
-	DM365_SPI3_SDENA1,
-
-	/* SPI4 */
-	DM365_SPI4_SCLK,
-	DM365_SPI4_SDO,
-	DM365_SPI4_SDI,
-	DM365_SPI4_SDENA0,
-	DM365_SPI4_SDENA1,
-
-	/* Clock */
-	DM365_CLKOUT0,
-	DM365_CLKOUT1,
-	DM365_CLKOUT2,
-
-	/* GPIO */
-	DM365_GPIO20,
-	DM365_GPIO30,
-	DM365_GPIO31,
-	DM365_GPIO32,
-	DM365_GPIO33,
-	DM365_GPIO40,
-	DM365_GPIO64_57,
-
-	/* Video */
-	DM365_VOUT_FIELD,
-	DM365_VOUT_FIELD_G81,
-	DM365_VOUT_HVSYNC,
-	DM365_VOUT_COUTL_EN,
-	DM365_VOUT_COUTH_EN,
-	DM365_VIN_CAM_WEN,
-	DM365_VIN_CAM_VD,
-	DM365_VIN_CAM_HD,
-	DM365_VIN_YIN4_7_EN,
-	DM365_VIN_YIN0_3_EN,
-
-	/* IRQ muxing */
-	DM365_INT_EDMA_CC,
-	DM365_INT_EDMA_TC0_ERR,
-	DM365_INT_EDMA_TC1_ERR,
-	DM365_INT_EDMA_TC2_ERR,
-	DM365_INT_EDMA_TC3_ERR,
-	DM365_INT_PRTCSS,
-	DM365_INT_EMAC_RXTHRESH,
-	DM365_INT_EMAC_RXPULSE,
-	DM365_INT_EMAC_TXPULSE,
-	DM365_INT_EMAC_MISCPULSE,
-	DM365_INT_IMX0_ENABLE,
-	DM365_INT_IMX0_DISABLE,
-	DM365_INT_HDVICP_ENABLE,
-	DM365_INT_HDVICP_DISABLE,
-	DM365_INT_IMX1_ENABLE,
-	DM365_INT_IMX1_DISABLE,
-	DM365_INT_NSF_ENABLE,
-	DM365_INT_NSF_DISABLE,
-
-	/* EDMA event muxing */
-	DM365_EVT2_ASP_TX,
-	DM365_EVT3_ASP_RX,
-	DM365_EVT2_VC_TX,
-	DM365_EVT3_VC_RX,
-	DM365_EVT26_MMC0_RX,
-};
-
-enum da830_index {
-	DA830_GPIO7_14,
-	DA830_RTCK,
-	DA830_GPIO7_15,
-	DA830_EMU_0,
-	DA830_EMB_SDCKE,
-	DA830_EMB_CLK_GLUE,
-	DA830_EMB_CLK,
-	DA830_NEMB_CS_0,
-	DA830_NEMB_CAS,
-	DA830_NEMB_RAS,
-	DA830_NEMB_WE,
-	DA830_EMB_BA_1,
-	DA830_EMB_BA_0,
-	DA830_EMB_A_0,
-	DA830_EMB_A_1,
-	DA830_EMB_A_2,
-	DA830_EMB_A_3,
-	DA830_EMB_A_4,
-	DA830_EMB_A_5,
-	DA830_GPIO7_0,
-	DA830_GPIO7_1,
-	DA830_GPIO7_2,
-	DA830_GPIO7_3,
-	DA830_GPIO7_4,
-	DA830_GPIO7_5,
-	DA830_GPIO7_6,
-	DA830_GPIO7_7,
-	DA830_EMB_A_6,
-	DA830_EMB_A_7,
-	DA830_EMB_A_8,
-	DA830_EMB_A_9,
-	DA830_EMB_A_10,
-	DA830_EMB_A_11,
-	DA830_EMB_A_12,
-	DA830_EMB_D_31,
-	DA830_GPIO7_8,
-	DA830_GPIO7_9,
-	DA830_GPIO7_10,
-	DA830_GPIO7_11,
-	DA830_GPIO7_12,
-	DA830_GPIO7_13,
-	DA830_GPIO3_13,
-	DA830_EMB_D_30,
-	DA830_EMB_D_29,
-	DA830_EMB_D_28,
-	DA830_EMB_D_27,
-	DA830_EMB_D_26,
-	DA830_EMB_D_25,
-	DA830_EMB_D_24,
-	DA830_EMB_D_23,
-	DA830_EMB_D_22,
-	DA830_EMB_D_21,
-	DA830_EMB_D_20,
-	DA830_EMB_D_19,
-	DA830_EMB_D_18,
-	DA830_EMB_D_17,
-	DA830_EMB_D_16,
-	DA830_NEMB_WE_DQM_3,
-	DA830_NEMB_WE_DQM_2,
-	DA830_EMB_D_0,
-	DA830_EMB_D_1,
-	DA830_EMB_D_2,
-	DA830_EMB_D_3,
-	DA830_EMB_D_4,
-	DA830_EMB_D_5,
-	DA830_EMB_D_6,
-	DA830_GPIO6_0,
-	DA830_GPIO6_1,
-	DA830_GPIO6_2,
-	DA830_GPIO6_3,
-	DA830_GPIO6_4,
-	DA830_GPIO6_5,
-	DA830_GPIO6_6,
-	DA830_EMB_D_7,
-	DA830_EMB_D_8,
-	DA830_EMB_D_9,
-	DA830_EMB_D_10,
-	DA830_EMB_D_11,
-	DA830_EMB_D_12,
-	DA830_EMB_D_13,
-	DA830_EMB_D_14,
-	DA830_GPIO6_7,
-	DA830_GPIO6_8,
-	DA830_GPIO6_9,
-	DA830_GPIO6_10,
-	DA830_GPIO6_11,
-	DA830_GPIO6_12,
-	DA830_GPIO6_13,
-	DA830_GPIO6_14,
-	DA830_EMB_D_15,
-	DA830_NEMB_WE_DQM_1,
-	DA830_NEMB_WE_DQM_0,
-	DA830_SPI0_SOMI_0,
-	DA830_SPI0_SIMO_0,
-	DA830_SPI0_CLK,
-	DA830_NSPI0_ENA,
-	DA830_NSPI0_SCS_0,
-	DA830_EQEP0I,
-	DA830_EQEP0S,
-	DA830_EQEP1I,
-	DA830_NUART0_CTS,
-	DA830_NUART0_RTS,
-	DA830_EQEP0A,
-	DA830_EQEP0B,
-	DA830_GPIO6_15,
-	DA830_GPIO5_14,
-	DA830_GPIO5_15,
-	DA830_GPIO5_0,
-	DA830_GPIO5_1,
-	DA830_GPIO5_2,
-	DA830_GPIO5_3,
-	DA830_GPIO5_4,
-	DA830_SPI1_SOMI_0,
-	DA830_SPI1_SIMO_0,
-	DA830_SPI1_CLK,
-	DA830_UART0_RXD,
-	DA830_UART0_TXD,
-	DA830_AXR1_10,
-	DA830_AXR1_11,
-	DA830_NSPI1_ENA,
-	DA830_I2C1_SCL,
-	DA830_I2C1_SDA,
-	DA830_EQEP1S,
-	DA830_I2C0_SDA,
-	DA830_I2C0_SCL,
-	DA830_UART2_RXD,
-	DA830_TM64P0_IN12,
-	DA830_TM64P0_OUT12,
-	DA830_GPIO5_5,
-	DA830_GPIO5_6,
-	DA830_GPIO5_7,
-	DA830_GPIO5_8,
-	DA830_GPIO5_9,
-	DA830_GPIO5_10,
-	DA830_GPIO5_11,
-	DA830_GPIO5_12,
-	DA830_NSPI1_SCS_0,
-	DA830_USB0_DRVVBUS,
-	DA830_AHCLKX0,
-	DA830_ACLKX0,
-	DA830_AFSX0,
-	DA830_AHCLKR0,
-	DA830_ACLKR0,
-	DA830_AFSR0,
-	DA830_UART2_TXD,
-	DA830_AHCLKX2,
-	DA830_ECAP0_APWM0,
-	DA830_RMII_MHZ_50_CLK,
-	DA830_ECAP1_APWM1,
-	DA830_USB_REFCLKIN,
-	DA830_GPIO5_13,
-	DA830_GPIO4_15,
-	DA830_GPIO2_11,
-	DA830_GPIO2_12,
-	DA830_GPIO2_13,
-	DA830_GPIO2_14,
-	DA830_GPIO2_15,
-	DA830_GPIO3_12,
-	DA830_AMUTE0,
-	DA830_AXR0_0,
-	DA830_AXR0_1,
-	DA830_AXR0_2,
-	DA830_AXR0_3,
-	DA830_AXR0_4,
-	DA830_AXR0_5,
-	DA830_AXR0_6,
-	DA830_RMII_TXD_0,
-	DA830_RMII_TXD_1,
-	DA830_RMII_TXEN,
-	DA830_RMII_CRS_DV,
-	DA830_RMII_RXD_0,
-	DA830_RMII_RXD_1,
-	DA830_RMII_RXER,
-	DA830_AFSR2,
-	DA830_ACLKX2,
-	DA830_AXR2_3,
-	DA830_AXR2_2,
-	DA830_AXR2_1,
-	DA830_AFSX2,
-	DA830_ACLKR2,
-	DA830_NRESETOUT,
-	DA830_GPIO3_0,
-	DA830_GPIO3_1,
-	DA830_GPIO3_2,
-	DA830_GPIO3_3,
-	DA830_GPIO3_4,
-	DA830_GPIO3_5,
-	DA830_GPIO3_6,
-	DA830_AXR0_7,
-	DA830_AXR0_8,
-	DA830_UART1_RXD,
-	DA830_UART1_TXD,
-	DA830_AXR0_11,
-	DA830_AHCLKX1,
-	DA830_ACLKX1,
-	DA830_AFSX1,
-	DA830_MDIO_CLK,
-	DA830_MDIO_D,
-	DA830_AXR0_9,
-	DA830_AXR0_10,
-	DA830_EPWM0B,
-	DA830_EPWM0A,
-	DA830_EPWMSYNCI,
-	DA830_AXR2_0,
-	DA830_EPWMSYNC0,
-	DA830_GPIO3_7,
-	DA830_GPIO3_8,
-	DA830_GPIO3_9,
-	DA830_GPIO3_10,
-	DA830_GPIO3_11,
-	DA830_GPIO3_14,
-	DA830_GPIO3_15,
-	DA830_GPIO4_10,
-	DA830_AHCLKR1,
-	DA830_ACLKR1,
-	DA830_AFSR1,
-	DA830_AMUTE1,
-	DA830_AXR1_0,
-	DA830_AXR1_1,
-	DA830_AXR1_2,
-	DA830_AXR1_3,
-	DA830_ECAP2_APWM2,
-	DA830_EHRPWMGLUETZ,
-	DA830_EQEP1A,
-	DA830_GPIO4_11,
-	DA830_GPIO4_12,
-	DA830_GPIO4_13,
-	DA830_GPIO4_14,
-	DA830_GPIO4_0,
-	DA830_GPIO4_1,
-	DA830_GPIO4_2,
-	DA830_GPIO4_3,
-	DA830_AXR1_4,
-	DA830_AXR1_5,
-	DA830_AXR1_6,
-	DA830_AXR1_7,
-	DA830_AXR1_8,
-	DA830_AXR1_9,
-	DA830_EMA_D_0,
-	DA830_EMA_D_1,
-	DA830_EQEP1B,
-	DA830_EPWM2B,
-	DA830_EPWM2A,
-	DA830_EPWM1B,
-	DA830_EPWM1A,
-	DA830_MMCSD_DAT_0,
-	DA830_MMCSD_DAT_1,
-	DA830_UHPI_HD_0,
-	DA830_UHPI_HD_1,
-	DA830_GPIO4_4,
-	DA830_GPIO4_5,
-	DA830_GPIO4_6,
-	DA830_GPIO4_7,
-	DA830_GPIO4_8,
-	DA830_GPIO4_9,
-	DA830_GPIO0_0,
-	DA830_GPIO0_1,
-	DA830_EMA_D_2,
-	DA830_EMA_D_3,
-	DA830_EMA_D_4,
-	DA830_EMA_D_5,
-	DA830_EMA_D_6,
-	DA830_EMA_D_7,
-	DA830_EMA_D_8,
-	DA830_EMA_D_9,
-	DA830_MMCSD_DAT_2,
-	DA830_MMCSD_DAT_3,
-	DA830_MMCSD_DAT_4,
-	DA830_MMCSD_DAT_5,
-	DA830_MMCSD_DAT_6,
-	DA830_MMCSD_DAT_7,
-	DA830_UHPI_HD_8,
-	DA830_UHPI_HD_9,
-	DA830_UHPI_HD_2,
-	DA830_UHPI_HD_3,
-	DA830_UHPI_HD_4,
-	DA830_UHPI_HD_5,
-	DA830_UHPI_HD_6,
-	DA830_UHPI_HD_7,
-	DA830_LCD_D_8,
-	DA830_LCD_D_9,
-	DA830_GPIO0_2,
-	DA830_GPIO0_3,
-	DA830_GPIO0_4,
-	DA830_GPIO0_5,
-	DA830_GPIO0_6,
-	DA830_GPIO0_7,
-	DA830_GPIO0_8,
-	DA830_GPIO0_9,
-	DA830_EMA_D_10,
-	DA830_EMA_D_11,
-	DA830_EMA_D_12,
-	DA830_EMA_D_13,
-	DA830_EMA_D_14,
-	DA830_EMA_D_15,
-	DA830_EMA_A_0,
-	DA830_EMA_A_1,
-	DA830_UHPI_HD_10,
-	DA830_UHPI_HD_11,
-	DA830_UHPI_HD_12,
-	DA830_UHPI_HD_13,
-	DA830_UHPI_HD_14,
-	DA830_UHPI_HD_15,
-	DA830_LCD_D_7,
-	DA830_MMCSD_CLK,
-	DA830_LCD_D_10,
-	DA830_LCD_D_11,
-	DA830_LCD_D_12,
-	DA830_LCD_D_13,
-	DA830_LCD_D_14,
-	DA830_LCD_D_15,
-	DA830_UHPI_HCNTL0,
-	DA830_GPIO0_10,
-	DA830_GPIO0_11,
-	DA830_GPIO0_12,
-	DA830_GPIO0_13,
-	DA830_GPIO0_14,
-	DA830_GPIO0_15,
-	DA830_GPIO1_0,
-	DA830_GPIO1_1,
-	DA830_EMA_A_2,
-	DA830_EMA_A_3,
-	DA830_EMA_A_4,
-	DA830_EMA_A_5,
-	DA830_EMA_A_6,
-	DA830_EMA_A_7,
-	DA830_EMA_A_8,
-	DA830_EMA_A_9,
-	DA830_MMCSD_CMD,
-	DA830_LCD_D_6,
-	DA830_LCD_D_3,
-	DA830_LCD_D_2,
-	DA830_LCD_D_1,
-	DA830_LCD_D_0,
-	DA830_LCD_PCLK,
-	DA830_LCD_HSYNC,
-	DA830_UHPI_HCNTL1,
-	DA830_GPIO1_2,
-	DA830_GPIO1_3,
-	DA830_GPIO1_4,
-	DA830_GPIO1_5,
-	DA830_GPIO1_6,
-	DA830_GPIO1_7,
-	DA830_GPIO1_8,
-	DA830_GPIO1_9,
-	DA830_EMA_A_10,
-	DA830_EMA_A_11,
-	DA830_EMA_A_12,
-	DA830_EMA_BA_1,
-	DA830_EMA_BA_0,
-	DA830_EMA_CLK,
-	DA830_EMA_SDCKE,
-	DA830_NEMA_CAS,
-	DA830_LCD_VSYNC,
-	DA830_NLCD_AC_ENB_CS,
-	DA830_LCD_MCLK,
-	DA830_LCD_D_5,
-	DA830_LCD_D_4,
-	DA830_OBSCLK,
-	DA830_NEMA_CS_4,
-	DA830_UHPI_HHWIL,
-	DA830_AHCLKR2,
-	DA830_GPIO1_10,
-	DA830_GPIO1_11,
-	DA830_GPIO1_12,
-	DA830_GPIO1_13,
-	DA830_GPIO1_14,
-	DA830_GPIO1_15,
-	DA830_GPIO2_0,
-	DA830_GPIO2_1,
-	DA830_NEMA_RAS,
-	DA830_NEMA_WE,
-	DA830_NEMA_CS_0,
-	DA830_NEMA_CS_2,
-	DA830_NEMA_CS_3,
-	DA830_NEMA_OE,
-	DA830_NEMA_WE_DQM_1,
-	DA830_NEMA_WE_DQM_0,
-	DA830_NEMA_CS_5,
-	DA830_UHPI_HRNW,
-	DA830_NUHPI_HAS,
-	DA830_NUHPI_HCS,
-	DA830_NUHPI_HDS1,
-	DA830_NUHPI_HDS2,
-	DA830_NUHPI_HINT,
-	DA830_AXR0_12,
-	DA830_AMUTE2,
-	DA830_AXR0_13,
-	DA830_AXR0_14,
-	DA830_AXR0_15,
-	DA830_GPIO2_2,
-	DA830_GPIO2_3,
-	DA830_GPIO2_4,
-	DA830_GPIO2_5,
-	DA830_GPIO2_6,
-	DA830_GPIO2_7,
-	DA830_GPIO2_8,
-	DA830_GPIO2_9,
-	DA830_EMA_WAIT_0,
-	DA830_NUHPI_HRDY,
-	DA830_GPIO2_10,
-};
-
-enum davinci_da850_index {
-	/* UART0 function */
-	DA850_NUART0_CTS,
-	DA850_NUART0_RTS,
-	DA850_UART0_RXD,
-	DA850_UART0_TXD,
-
-	/* UART1 function */
-	DA850_NUART1_CTS,
-	DA850_NUART1_RTS,
-	DA850_UART1_RXD,
-	DA850_UART1_TXD,
-
-	/* UART2 function */
-	DA850_NUART2_CTS,
-	DA850_NUART2_RTS,
-	DA850_UART2_RXD,
-	DA850_UART2_TXD,
-
-	/* I2C1 function */
-	DA850_I2C1_SCL,
-	DA850_I2C1_SDA,
-
-	/* I2C0 function */
-	DA850_I2C0_SDA,
-	DA850_I2C0_SCL,
-
-	/* EMAC function */
-	DA850_MII_TXEN,
-	DA850_MII_TXCLK,
-	DA850_MII_COL,
-	DA850_MII_TXD_3,
-	DA850_MII_TXD_2,
-	DA850_MII_TXD_1,
-	DA850_MII_TXD_0,
-	DA850_MII_RXER,
-	DA850_MII_CRS,
-	DA850_MII_RXCLK,
-	DA850_MII_RXDV,
-	DA850_MII_RXD_3,
-	DA850_MII_RXD_2,
-	DA850_MII_RXD_1,
-	DA850_MII_RXD_0,
-	DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	DA850_RMII_TXD_0,
-	DA850_RMII_TXD_1,
-	DA850_RMII_TXEN,
-	DA850_RMII_CRS_DV,
-	DA850_RMII_RXD_0,
-	DA850_RMII_RXD_1,
-	DA850_RMII_RXER,
-	DA850_RMII_MHZ_50_CLK,
-
-	/* McASP function */
-	DA850_ACLKR,
-	DA850_ACLKX,
-	DA850_AFSR,
-	DA850_AFSX,
-	DA850_AHCLKR,
-	DA850_AHCLKX,
-	DA850_AMUTE,
-	DA850_AXR_15,
-	DA850_AXR_14,
-	DA850_AXR_13,
-	DA850_AXR_12,
-	DA850_AXR_11,
-	DA850_AXR_10,
-	DA850_AXR_9,
-	DA850_AXR_8,
-	DA850_AXR_7,
-	DA850_AXR_6,
-	DA850_AXR_5,
-	DA850_AXR_4,
-	DA850_AXR_3,
-	DA850_AXR_2,
-	DA850_AXR_1,
-	DA850_AXR_0,
-
-	/* LCD function */
-	DA850_LCD_D_7,
-	DA850_LCD_D_6,
-	DA850_LCD_D_5,
-	DA850_LCD_D_4,
-	DA850_LCD_D_3,
-	DA850_LCD_D_2,
-	DA850_LCD_D_1,
-	DA850_LCD_D_0,
-	DA850_LCD_D_15,
-	DA850_LCD_D_14,
-	DA850_LCD_D_13,
-	DA850_LCD_D_12,
-	DA850_LCD_D_11,
-	DA850_LCD_D_10,
-	DA850_LCD_D_9,
-	DA850_LCD_D_8,
-	DA850_LCD_PCLK,
-	DA850_LCD_HSYNC,
-	DA850_LCD_VSYNC,
-	DA850_NLCD_AC_ENB_CS,
-
-	/* MMC/SD0 function */
-	DA850_MMCSD0_DAT_0,
-	DA850_MMCSD0_DAT_1,
-	DA850_MMCSD0_DAT_2,
-	DA850_MMCSD0_DAT_3,
-	DA850_MMCSD0_CLK,
-	DA850_MMCSD0_CMD,
-
-	/* MMC/SD1 function */
-	DA850_MMCSD1_DAT_0,
-	DA850_MMCSD1_DAT_1,
-	DA850_MMCSD1_DAT_2,
-	DA850_MMCSD1_DAT_3,
-	DA850_MMCSD1_CLK,
-	DA850_MMCSD1_CMD,
-
-	/* EMIF2.5/EMIFA function */
-	DA850_EMA_D_7,
-	DA850_EMA_D_6,
-	DA850_EMA_D_5,
-	DA850_EMA_D_4,
-	DA850_EMA_D_3,
-	DA850_EMA_D_2,
-	DA850_EMA_D_1,
-	DA850_EMA_D_0,
-	DA850_EMA_A_1,
-	DA850_EMA_A_2,
-	DA850_NEMA_CS_3,
-	DA850_NEMA_CS_4,
-	DA850_NEMA_WE,
-	DA850_NEMA_OE,
-	DA850_EMA_D_15,
-	DA850_EMA_D_14,
-	DA850_EMA_D_13,
-	DA850_EMA_D_12,
-	DA850_EMA_D_11,
-	DA850_EMA_D_10,
-	DA850_EMA_D_9,
-	DA850_EMA_D_8,
-	DA850_EMA_A_0,
-	DA850_EMA_A_3,
-	DA850_EMA_A_4,
-	DA850_EMA_A_5,
-	DA850_EMA_A_6,
-	DA850_EMA_A_7,
-	DA850_EMA_A_8,
-	DA850_EMA_A_9,
-	DA850_EMA_A_10,
-	DA850_EMA_A_11,
-	DA850_EMA_A_12,
-	DA850_EMA_A_13,
-	DA850_EMA_A_14,
-	DA850_EMA_A_15,
-	DA850_EMA_A_16,
-	DA850_EMA_A_17,
-	DA850_EMA_A_18,
-	DA850_EMA_A_19,
-	DA850_EMA_A_20,
-	DA850_EMA_A_21,
-	DA850_EMA_A_22,
-	DA850_EMA_A_23,
-	DA850_EMA_BA_1,
-	DA850_EMA_CLK,
-	DA850_EMA_WAIT_1,
-	DA850_NEMA_CS_2,
-
-	/* GPIO function */
-	DA850_GPIO2_4,
-	DA850_GPIO2_6,
-	DA850_GPIO2_8,
-	DA850_GPIO2_15,
-	DA850_GPIO3_12,
-	DA850_GPIO3_13,
-	DA850_GPIO4_0,
-	DA850_GPIO4_1,
-	DA850_GPIO6_9,
-	DA850_GPIO6_10,
-	DA850_GPIO6_13,
-	DA850_RTC_ALARM,
-
-	/* VPIF Capture */
-	DA850_VPIF_DIN0,
-	DA850_VPIF_DIN1,
-	DA850_VPIF_DIN2,
-	DA850_VPIF_DIN3,
-	DA850_VPIF_DIN4,
-	DA850_VPIF_DIN5,
-	DA850_VPIF_DIN6,
-	DA850_VPIF_DIN7,
-	DA850_VPIF_DIN8,
-	DA850_VPIF_DIN9,
-	DA850_VPIF_DIN10,
-	DA850_VPIF_DIN11,
-	DA850_VPIF_DIN12,
-	DA850_VPIF_DIN13,
-	DA850_VPIF_DIN14,
-	DA850_VPIF_DIN15,
-	DA850_VPIF_CLKIN0,
-	DA850_VPIF_CLKIN1,
-	DA850_VPIF_CLKIN2,
-	DA850_VPIF_CLKIN3,
-
-	/* VPIF Display */
-	DA850_VPIF_DOUT0,
-	DA850_VPIF_DOUT1,
-	DA850_VPIF_DOUT2,
-	DA850_VPIF_DOUT3,
-	DA850_VPIF_DOUT4,
-	DA850_VPIF_DOUT5,
-	DA850_VPIF_DOUT6,
-	DA850_VPIF_DOUT7,
-	DA850_VPIF_DOUT8,
-	DA850_VPIF_DOUT9,
-	DA850_VPIF_DOUT10,
-	DA850_VPIF_DOUT11,
-	DA850_VPIF_DOUT12,
-	DA850_VPIF_DOUT13,
-	DA850_VPIF_DOUT14,
-	DA850_VPIF_DOUT15,
-	DA850_VPIF_CLKO2,
-	DA850_VPIF_CLKO3,
-};
-
-#define PINMUX(x)		(4 * (x))
-
-#ifdef CONFIG_DAVINCI_MUX
-/* setup pin muxing */
-extern int davinci_cfg_reg(unsigned long reg_cfg);
-extern int davinci_cfg_reg_list(const short pins[]);
-#else
-/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
-static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
-static inline int davinci_cfg_reg_list(const short pins[])
-{
-	return 0;
-}
-#endif
-
-#endif /* __INC_MACH_MUX_H */
diff --git a/arch/arm/mach-davinci/include/mach/pm.h b/arch/arm/mach-davinci/include/mach/pm.h
deleted file mode 100644
index 5a5f0ecc0704..000000000000
--- a/arch/arm/mach-davinci/include/mach/pm.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * TI DaVinci platform support for power management.
- *
- * Copyright (C) 2009 Texas Instruments, Inc. https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef _MACH_DAVINCI_PM_H
-#define _MACH_DAVINCI_PM_H
-
-/*
- * Caution: Assembly code in sleep.S makes assumtion on the order
- * of the members of this structure.
- */
-struct davinci_pm_config {
-	void __iomem *ddr2_ctlr_base;
-	void __iomem *ddrpsc_reg_base;
-	int ddrpsc_num;
-	void __iomem *ddrpll_reg_base;
-	void __iomem *deepsleep_reg;
-	void __iomem *cpupll_reg_base;
-	/*
-	 * Note on SLEEPCOUNT:
-	 * The SLEEPCOUNT feature is mainly intended for cases in which
-	 * the internal oscillator is used. The internal oscillator is
-	 * fully disabled in deep sleep mode.  When you exist deep sleep
-	 * mode, the oscillator will be turned on and will generate very
-	 * small oscillations which will not be detected by the deep sleep
-	 * counter.  Eventually those oscillations will grow to an amplitude
-	 * large enough to start incrementing the deep sleep counter.
-	 * In this case recommendation from hardware engineers is that the
-	 * SLEEPCOUNT be set to 4096.  This means that 4096 valid clock cycles
-	 * must be detected before the clock is passed to the rest of the
-	 * system.
-	 * In the case that the internal oscillator is not used and the
-	 * clock is generated externally, the SLEEPCOUNT value can be very
-	 * small since the clock input is assumed to be stable before SoC
-	 * is taken out of deepsleep mode.  A value of 128 would be more than
-	 * adequate.
-	 */
-	int sleepcount;
-};
-
-extern unsigned int davinci_cpu_suspend_sz;
-extern void davinci_cpu_suspend(struct davinci_pm_config *);
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
deleted file mode 100644
index d4b4aa87964f..000000000000
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * DaVinci serial device definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <asm/memory.h>
-
-#include <mach/hardware.h>
-
-#define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
-#define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
-#define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
-
-#define DA8XX_UART0_BASE	(IO_PHYS + 0x042000)
-#define DA8XX_UART1_BASE	(IO_PHYS + 0x10c000)
-#define DA8XX_UART2_BASE	(IO_PHYS + 0x10d000)
-
-/* DaVinci UART register offsets */
-#define UART_DAVINCI_PWREMU		0x0c
-#define UART_DM646X_SCR			0x10
-#define UART_DM646X_SCR_TX_WATERMARK	0x08
-
-#ifndef __ASSEMBLY__
-#include <linux/platform_device.h>
-
-extern int davinci_serial_init(struct platform_device *);
-#endif
-
-#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
deleted file mode 100644
index 53b456a5bbe0..000000000000
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * arch/arm/plat-omap/include/mach/uncompress.h
- *
- * Original copyrights follow.
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-
-#include <asm/mach-types.h>
-
-#include <mach/serial.h>
-
-#define IOMEM(x)	((void __force __iomem *)(x))
-
-u32 *uart;
-
-/* PORT_16C550A, in polled non-fifo mode */
-static inline void putc(char c)
-{
-	if (!uart)
-		return;
-
-	while (!(uart[UART_LSR] & UART_LSR_THRE))
-		barrier();
-	uart[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-	if (!uart)
-		return;
-
-	while (!(uart[UART_LSR] & UART_LSR_THRE))
-		barrier();
-}
-
-static inline void set_uart_info(u32 phys)
-{
-	uart = (u32 *)phys;
-}
-
-#define _DEBUG_LL_ENTRY(machine, phys)				\
-	{							\
-		if (machine_is_##machine()) {			\
-			set_uart_info(phys);			\
-			break;					\
-		}						\
-	}
-
-#define DEBUG_LL_DAVINCI(machine, port)				\
-	_DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE)
-
-#define DEBUG_LL_DA8XX(machine, port)				\
-	_DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE)
-
-static inline void __arch_decomp_setup(unsigned long arch_id)
-{
-	/*
-	 * Initialize the port based on the machine ID from the bootloader.
-	 * Note that we're using macros here instead of switch statement
-	 * as machine_is functions are optimized out for the boards that
-	 * are not selected.
-	 */
-	do {
-		/* Davinci boards */
-		DEBUG_LL_DAVINCI(davinci_evm,		0);
-		DEBUG_LL_DAVINCI(sffsdr,		0);
-		DEBUG_LL_DAVINCI(neuros_osd2,		0);
-		DEBUG_LL_DAVINCI(davinci_dm355_evm,	0);
-		DEBUG_LL_DAVINCI(dm355_leopard,		0);
-		DEBUG_LL_DAVINCI(davinci_dm6467_evm,	0);
-		DEBUG_LL_DAVINCI(davinci_dm365_evm,	0);
-
-		/* DA8xx boards */
-		DEBUG_LL_DA8XX(davinci_da830_evm,	2);
-		DEBUG_LL_DA8XX(davinci_da850_evm,	2);
-		DEBUG_LL_DA8XX(mityomapl138,		1);
-		DEBUG_LL_DA8XX(omapl138_hawkboard,	2);
-	} while (0);
-}
-
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
diff --git a/arch/arm/mach-davinci/irqs.h b/arch/arm/mach-davinci/irqs.h
index 8f9fc7a56ce8..b1ceed81e9fa 100644
--- a/arch/arm/mach-davinci/irqs.h
+++ b/arch/arm/mach-davinci/irqs.h
@@ -27,219 +27,6 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-/* Base address */
-#define DAVINCI_ARM_INTC_BASE 0x01C48000
-
-/* Interrupt lines */
-#define IRQ_VDINT0       0
-#define IRQ_VDINT1       1
-#define IRQ_VDINT2       2
-#define IRQ_HISTINT      3
-#define IRQ_H3AINT       4
-#define IRQ_PRVUINT      5
-#define IRQ_RSZINT       6
-#define IRQ_VFOCINT      7
-#define IRQ_VENCINT      8
-#define IRQ_ASQINT       9
-#define IRQ_IMXINT       10
-#define IRQ_VLCDINT      11
-#define IRQ_USBINT       12
-#define IRQ_EMACINT      13
-
-#define IRQ_CCINT0       16
-#define IRQ_CCERRINT     17
-#define IRQ_TCERRINT0    18
-#define IRQ_TCERRINT     19
-#define IRQ_PSCIN        20
-
-#define IRQ_IDE          22
-#define IRQ_HPIINT       23
-#define IRQ_MBXINT       24
-#define IRQ_MBRINT       25
-#define IRQ_MMCINT       26
-#define IRQ_SDIOINT      27
-#define IRQ_MSINT        28
-#define IRQ_DDRINT       29
-#define IRQ_AEMIFINT     30
-#define IRQ_VLQINT       31
-#define IRQ_TINT0_TINT12 32
-#define IRQ_TINT0_TINT34 33
-#define IRQ_TINT1_TINT12 34
-#define IRQ_TINT1_TINT34 35
-#define IRQ_PWMINT0      36
-#define IRQ_PWMINT1      37
-#define IRQ_PWMINT2      38
-#define IRQ_I2C          39
-#define IRQ_UARTINT0     40
-#define IRQ_UARTINT1     41
-#define IRQ_UARTINT2     42
-#define IRQ_SPINT0       43
-#define IRQ_SPINT1       44
-
-#define IRQ_DSP2ARM0     46
-#define IRQ_DSP2ARM1     47
-#define IRQ_GPIO0        48
-#define IRQ_GPIO1        49
-#define IRQ_GPIO2        50
-#define IRQ_GPIO3        51
-#define IRQ_GPIO4        52
-#define IRQ_GPIO5        53
-#define IRQ_GPIO6        54
-#define IRQ_GPIO7        55
-#define IRQ_GPIOBNK0     56
-#define IRQ_GPIOBNK1     57
-#define IRQ_GPIOBNK2     58
-#define IRQ_GPIOBNK3     59
-#define IRQ_GPIOBNK4     60
-#define IRQ_COMMTX       61
-#define IRQ_COMMRX       62
-#define IRQ_EMUINT       63
-
-#define DAVINCI_N_AINTC_IRQ	64
-
-#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
-
-/* DaVinci DM6467-specific Interrupts */
-#define IRQ_DM646X_VP_VERTINT0  0
-#define IRQ_DM646X_VP_VERTINT1  1
-#define IRQ_DM646X_VP_VERTINT2  2
-#define IRQ_DM646X_VP_VERTINT3  3
-#define IRQ_DM646X_VP_ERRINT    4
-#define IRQ_DM646X_RESERVED_1   5
-#define IRQ_DM646X_RESERVED_2   6
-#define IRQ_DM646X_WDINT        7
-#define IRQ_DM646X_CRGENINT0    8
-#define IRQ_DM646X_CRGENINT1    9
-#define IRQ_DM646X_TSIFINT0     10
-#define IRQ_DM646X_TSIFINT1     11
-#define IRQ_DM646X_VDCEINT      12
-#define IRQ_DM646X_USBINT       13
-#define IRQ_DM646X_USBDMAINT    14
-#define IRQ_DM646X_PCIINT       15
-#define IRQ_DM646X_TCERRINT2    20
-#define IRQ_DM646X_TCERRINT3    21
-#define IRQ_DM646X_IDE          22
-#define IRQ_DM646X_HPIINT       23
-#define IRQ_DM646X_EMACRXTHINT  24
-#define IRQ_DM646X_EMACRXINT    25
-#define IRQ_DM646X_EMACTXINT    26
-#define IRQ_DM646X_EMACMISCINT  27
-#define IRQ_DM646X_MCASP0TXINT  28
-#define IRQ_DM646X_MCASP0RXINT  29
-#define IRQ_DM646X_MCASP1TXINT  30
-#define IRQ_DM646X_RESERVED_3   31
-#define IRQ_DM646X_VLQINT       38
-#define IRQ_DM646X_UARTINT2     42
-#define IRQ_DM646X_SPINT0       43
-#define IRQ_DM646X_SPINT1       44
-#define IRQ_DM646X_DSP2ARMINT   45
-#define IRQ_DM646X_RESERVED_4   46
-#define IRQ_DM646X_PSCINT       47
-#define IRQ_DM646X_GPIO0        48
-#define IRQ_DM646X_GPIO1        49
-#define IRQ_DM646X_GPIO2        50
-#define IRQ_DM646X_GPIO3        51
-#define IRQ_DM646X_GPIO4        52
-#define IRQ_DM646X_GPIO5        53
-#define IRQ_DM646X_GPIO6        54
-#define IRQ_DM646X_GPIO7        55
-#define IRQ_DM646X_GPIOBNK0     56
-#define IRQ_DM646X_GPIOBNK1     57
-#define IRQ_DM646X_GPIOBNK2     58
-#define IRQ_DM646X_DDRINT       59
-#define IRQ_DM646X_AEMIFINT     60
-
-/* DaVinci DM355-specific Interrupts */
-#define IRQ_DM355_CCDC_VDINT0	0
-#define IRQ_DM355_CCDC_VDINT1	1
-#define IRQ_DM355_CCDC_VDINT2	2
-#define IRQ_DM355_IPIPE_HST	3
-#define IRQ_DM355_H3AINT	4
-#define IRQ_DM355_IPIPE_SDR	5
-#define IRQ_DM355_IPIPEIFINT	6
-#define IRQ_DM355_OSDINT	7
-#define IRQ_DM355_VENCINT	8
-#define IRQ_DM355_IMCOPINT	11
-#define IRQ_DM355_RTOINT	13
-#define IRQ_DM355_TINT4		13
-#define IRQ_DM355_TINT2_TINT12	13
-#define IRQ_DM355_UARTINT2	14
-#define IRQ_DM355_TINT5		14
-#define IRQ_DM355_TINT2_TINT34	14
-#define IRQ_DM355_TINT6		15
-#define IRQ_DM355_TINT3_TINT12	15
-#define IRQ_DM355_SPINT1_0	17
-#define IRQ_DM355_SPINT1_1	18
-#define IRQ_DM355_SPINT2_0	19
-#define IRQ_DM355_SPINT2_1	21
-#define IRQ_DM355_TINT7		22
-#define IRQ_DM355_TINT3_TINT34	22
-#define IRQ_DM355_SDIOINT0	23
-#define IRQ_DM355_MMCINT0	26
-#define IRQ_DM355_MSINT		26
-#define IRQ_DM355_MMCINT1	27
-#define IRQ_DM355_PWMINT3	28
-#define IRQ_DM355_SDIOINT1	31
-#define IRQ_DM355_SPINT0_0	42
-#define IRQ_DM355_SPINT0_1	43
-#define IRQ_DM355_GPIO0		44
-#define IRQ_DM355_GPIO1		45
-#define IRQ_DM355_GPIO2		46
-#define IRQ_DM355_GPIO3		47
-#define IRQ_DM355_GPIO4		48
-#define IRQ_DM355_GPIO5		49
-#define IRQ_DM355_GPIO6		50
-#define IRQ_DM355_GPIO7		51
-#define IRQ_DM355_GPIO8		52
-#define IRQ_DM355_GPIO9		53
-#define IRQ_DM355_GPIOBNK0	54
-#define IRQ_DM355_GPIOBNK1	55
-#define IRQ_DM355_GPIOBNK2	56
-#define IRQ_DM355_GPIOBNK3	57
-#define IRQ_DM355_GPIOBNK4	58
-#define IRQ_DM355_GPIOBNK5	59
-#define IRQ_DM355_GPIOBNK6	60
-
-/* DaVinci DM365-specific Interrupts */
-#define IRQ_DM365_INSFINT	7
-#define IRQ_DM365_IMXINT1	8
-#define IRQ_DM365_IMXINT0	10
-#define IRQ_DM365_KLD_ARMINT	10
-#define IRQ_DM365_IMCOPINT	11
-#define IRQ_DM365_RTOINT	13
-#define IRQ_DM365_TINT5		14
-#define IRQ_DM365_TINT6		15
-#define IRQ_DM365_SPINT2_1	21
-#define IRQ_DM365_TINT7		22
-#define IRQ_DM365_SDIOINT0	23
-#define IRQ_DM365_MMCINT1	27
-#define IRQ_DM365_PWMINT3	28
-#define IRQ_DM365_RTCINT	29
-#define IRQ_DM365_SDIOINT1	31
-#define IRQ_DM365_SPIINT0_0	42
-#define IRQ_DM365_SPIINT3_0	43
-#define IRQ_DM365_GPIO0		44
-#define IRQ_DM365_GPIO1		45
-#define IRQ_DM365_GPIO2		46
-#define IRQ_DM365_GPIO3		47
-#define IRQ_DM365_GPIO4		48
-#define IRQ_DM365_GPIO5		49
-#define IRQ_DM365_GPIO6		50
-#define IRQ_DM365_GPIO7		51
-#define IRQ_DM365_EMAC_RXTHRESH	52
-#define IRQ_DM365_EMAC_RXPULSE	53
-#define IRQ_DM365_EMAC_TXPULSE	54
-#define IRQ_DM365_EMAC_MISCPULSE 55
-#define IRQ_DM365_GPIO12	56
-#define IRQ_DM365_GPIO13	57
-#define IRQ_DM365_GPIO14	58
-#define IRQ_DM365_GPIO15	59
-#define IRQ_DM365_ADCINT	59
-#define IRQ_DM365_KEYINT	60
-#define IRQ_DM365_TCERRINT2	61
-#define IRQ_DM365_TCERRINT3	62
-#define IRQ_DM365_EMUINT	63
-
 /* DA8XX interrupts */
 #define IRQ_DA8XX_COMMTX		0
 #define IRQ_DA8XX_COMMRX		1
@@ -398,8 +185,4 @@
 
 #define DA850_N_CP_INTC_IRQ		101
 
-/* da850 currently has the most gpio pins (144) */
-#define DAVINCI_N_GPIO			144
-/* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */
-
 #endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 6a2ff0a654a5..37de35eb6e8b 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Utility to set the DAVINCI MUX register from a table in mux.h
  *
@@ -8,10 +9,7 @@
  *
  * Written by Tony Lindgren
  *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2007 (c) MontaVista Software, Inc.
  *
  * Copyright (C) 2008 Texas Instruments.
  */
@@ -22,8 +20,8 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 
-#include <mach/mux.h>
-#include <mach/common.h>
+#include "mux.h"
+#include "common.h"
 
 static void __iomem *pinmux_base;
 
@@ -99,18 +97,3 @@ int davinci_cfg_reg(const unsigned long index)
 
 	return 0;
 }
-EXPORT_SYMBOL(davinci_cfg_reg);
-
-int davinci_cfg_reg_list(const short pins[])
-{
-	int i, error = -EINVAL;
-
-	if (pins)
-		for (i = 0; pins[i] >= 0; i++) {
-			error = davinci_cfg_reg(pins[i]);
-			if (error)
-				break;
-		}
-
-	return error;
-}
diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h
index 5aad1e7dd210..38f0e427291e 100644
--- a/arch/arm/mach-davinci/mux.h
+++ b/arch/arm/mach-davinci/mux.h
@@ -1,19 +1,669 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Pin-multiplex helper macros for TI DaVinci family devices
  *
  * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
  *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2007 (c) MontaVista Software, Inc.
  *
  * Copyright (C) 2008 Texas Instruments.
  */
 #ifndef _MACH_DAVINCI_MUX_H_
 #define _MACH_DAVINCI_MUX_H_
 
-#include <mach/mux.h>
+struct mux_config {
+	const char *name;
+	const char *mux_reg_name;
+	const unsigned char mux_reg;
+	const unsigned char mask_offset;
+	const unsigned char mask;
+	const unsigned char mode;
+	bool debug;
+};
+
+enum da830_index {
+	DA830_GPIO7_14,
+	DA830_RTCK,
+	DA830_GPIO7_15,
+	DA830_EMU_0,
+	DA830_EMB_SDCKE,
+	DA830_EMB_CLK_GLUE,
+	DA830_EMB_CLK,
+	DA830_NEMB_CS_0,
+	DA830_NEMB_CAS,
+	DA830_NEMB_RAS,
+	DA830_NEMB_WE,
+	DA830_EMB_BA_1,
+	DA830_EMB_BA_0,
+	DA830_EMB_A_0,
+	DA830_EMB_A_1,
+	DA830_EMB_A_2,
+	DA830_EMB_A_3,
+	DA830_EMB_A_4,
+	DA830_EMB_A_5,
+	DA830_GPIO7_0,
+	DA830_GPIO7_1,
+	DA830_GPIO7_2,
+	DA830_GPIO7_3,
+	DA830_GPIO7_4,
+	DA830_GPIO7_5,
+	DA830_GPIO7_6,
+	DA830_GPIO7_7,
+	DA830_EMB_A_6,
+	DA830_EMB_A_7,
+	DA830_EMB_A_8,
+	DA830_EMB_A_9,
+	DA830_EMB_A_10,
+	DA830_EMB_A_11,
+	DA830_EMB_A_12,
+	DA830_EMB_D_31,
+	DA830_GPIO7_8,
+	DA830_GPIO7_9,
+	DA830_GPIO7_10,
+	DA830_GPIO7_11,
+	DA830_GPIO7_12,
+	DA830_GPIO7_13,
+	DA830_GPIO3_13,
+	DA830_EMB_D_30,
+	DA830_EMB_D_29,
+	DA830_EMB_D_28,
+	DA830_EMB_D_27,
+	DA830_EMB_D_26,
+	DA830_EMB_D_25,
+	DA830_EMB_D_24,
+	DA830_EMB_D_23,
+	DA830_EMB_D_22,
+	DA830_EMB_D_21,
+	DA830_EMB_D_20,
+	DA830_EMB_D_19,
+	DA830_EMB_D_18,
+	DA830_EMB_D_17,
+	DA830_EMB_D_16,
+	DA830_NEMB_WE_DQM_3,
+	DA830_NEMB_WE_DQM_2,
+	DA830_EMB_D_0,
+	DA830_EMB_D_1,
+	DA830_EMB_D_2,
+	DA830_EMB_D_3,
+	DA830_EMB_D_4,
+	DA830_EMB_D_5,
+	DA830_EMB_D_6,
+	DA830_GPIO6_0,
+	DA830_GPIO6_1,
+	DA830_GPIO6_2,
+	DA830_GPIO6_3,
+	DA830_GPIO6_4,
+	DA830_GPIO6_5,
+	DA830_GPIO6_6,
+	DA830_EMB_D_7,
+	DA830_EMB_D_8,
+	DA830_EMB_D_9,
+	DA830_EMB_D_10,
+	DA830_EMB_D_11,
+	DA830_EMB_D_12,
+	DA830_EMB_D_13,
+	DA830_EMB_D_14,
+	DA830_GPIO6_7,
+	DA830_GPIO6_8,
+	DA830_GPIO6_9,
+	DA830_GPIO6_10,
+	DA830_GPIO6_11,
+	DA830_GPIO6_12,
+	DA830_GPIO6_13,
+	DA830_GPIO6_14,
+	DA830_EMB_D_15,
+	DA830_NEMB_WE_DQM_1,
+	DA830_NEMB_WE_DQM_0,
+	DA830_SPI0_SOMI_0,
+	DA830_SPI0_SIMO_0,
+	DA830_SPI0_CLK,
+	DA830_NSPI0_ENA,
+	DA830_NSPI0_SCS_0,
+	DA830_EQEP0I,
+	DA830_EQEP0S,
+	DA830_EQEP1I,
+	DA830_NUART0_CTS,
+	DA830_NUART0_RTS,
+	DA830_EQEP0A,
+	DA830_EQEP0B,
+	DA830_GPIO6_15,
+	DA830_GPIO5_14,
+	DA830_GPIO5_15,
+	DA830_GPIO5_0,
+	DA830_GPIO5_1,
+	DA830_GPIO5_2,
+	DA830_GPIO5_3,
+	DA830_GPIO5_4,
+	DA830_SPI1_SOMI_0,
+	DA830_SPI1_SIMO_0,
+	DA830_SPI1_CLK,
+	DA830_UART0_RXD,
+	DA830_UART0_TXD,
+	DA830_AXR1_10,
+	DA830_AXR1_11,
+	DA830_NSPI1_ENA,
+	DA830_I2C1_SCL,
+	DA830_I2C1_SDA,
+	DA830_EQEP1S,
+	DA830_I2C0_SDA,
+	DA830_I2C0_SCL,
+	DA830_UART2_RXD,
+	DA830_TM64P0_IN12,
+	DA830_TM64P0_OUT12,
+	DA830_GPIO5_5,
+	DA830_GPIO5_6,
+	DA830_GPIO5_7,
+	DA830_GPIO5_8,
+	DA830_GPIO5_9,
+	DA830_GPIO5_10,
+	DA830_GPIO5_11,
+	DA830_GPIO5_12,
+	DA830_NSPI1_SCS_0,
+	DA830_USB0_DRVVBUS,
+	DA830_AHCLKX0,
+	DA830_ACLKX0,
+	DA830_AFSX0,
+	DA830_AHCLKR0,
+	DA830_ACLKR0,
+	DA830_AFSR0,
+	DA830_UART2_TXD,
+	DA830_AHCLKX2,
+	DA830_ECAP0_APWM0,
+	DA830_RMII_MHZ_50_CLK,
+	DA830_ECAP1_APWM1,
+	DA830_USB_REFCLKIN,
+	DA830_GPIO5_13,
+	DA830_GPIO4_15,
+	DA830_GPIO2_11,
+	DA830_GPIO2_12,
+	DA830_GPIO2_13,
+	DA830_GPIO2_14,
+	DA830_GPIO2_15,
+	DA830_GPIO3_12,
+	DA830_AMUTE0,
+	DA830_AXR0_0,
+	DA830_AXR0_1,
+	DA830_AXR0_2,
+	DA830_AXR0_3,
+	DA830_AXR0_4,
+	DA830_AXR0_5,
+	DA830_AXR0_6,
+	DA830_RMII_TXD_0,
+	DA830_RMII_TXD_1,
+	DA830_RMII_TXEN,
+	DA830_RMII_CRS_DV,
+	DA830_RMII_RXD_0,
+	DA830_RMII_RXD_1,
+	DA830_RMII_RXER,
+	DA830_AFSR2,
+	DA830_ACLKX2,
+	DA830_AXR2_3,
+	DA830_AXR2_2,
+	DA830_AXR2_1,
+	DA830_AFSX2,
+	DA830_ACLKR2,
+	DA830_NRESETOUT,
+	DA830_GPIO3_0,
+	DA830_GPIO3_1,
+	DA830_GPIO3_2,
+	DA830_GPIO3_3,
+	DA830_GPIO3_4,
+	DA830_GPIO3_5,
+	DA830_GPIO3_6,
+	DA830_AXR0_7,
+	DA830_AXR0_8,
+	DA830_UART1_RXD,
+	DA830_UART1_TXD,
+	DA830_AXR0_11,
+	DA830_AHCLKX1,
+	DA830_ACLKX1,
+	DA830_AFSX1,
+	DA830_MDIO_CLK,
+	DA830_MDIO_D,
+	DA830_AXR0_9,
+	DA830_AXR0_10,
+	DA830_EPWM0B,
+	DA830_EPWM0A,
+	DA830_EPWMSYNCI,
+	DA830_AXR2_0,
+	DA830_EPWMSYNC0,
+	DA830_GPIO3_7,
+	DA830_GPIO3_8,
+	DA830_GPIO3_9,
+	DA830_GPIO3_10,
+	DA830_GPIO3_11,
+	DA830_GPIO3_14,
+	DA830_GPIO3_15,
+	DA830_GPIO4_10,
+	DA830_AHCLKR1,
+	DA830_ACLKR1,
+	DA830_AFSR1,
+	DA830_AMUTE1,
+	DA830_AXR1_0,
+	DA830_AXR1_1,
+	DA830_AXR1_2,
+	DA830_AXR1_3,
+	DA830_ECAP2_APWM2,
+	DA830_EHRPWMGLUETZ,
+	DA830_EQEP1A,
+	DA830_GPIO4_11,
+	DA830_GPIO4_12,
+	DA830_GPIO4_13,
+	DA830_GPIO4_14,
+	DA830_GPIO4_0,
+	DA830_GPIO4_1,
+	DA830_GPIO4_2,
+	DA830_GPIO4_3,
+	DA830_AXR1_4,
+	DA830_AXR1_5,
+	DA830_AXR1_6,
+	DA830_AXR1_7,
+	DA830_AXR1_8,
+	DA830_AXR1_9,
+	DA830_EMA_D_0,
+	DA830_EMA_D_1,
+	DA830_EQEP1B,
+	DA830_EPWM2B,
+	DA830_EPWM2A,
+	DA830_EPWM1B,
+	DA830_EPWM1A,
+	DA830_MMCSD_DAT_0,
+	DA830_MMCSD_DAT_1,
+	DA830_UHPI_HD_0,
+	DA830_UHPI_HD_1,
+	DA830_GPIO4_4,
+	DA830_GPIO4_5,
+	DA830_GPIO4_6,
+	DA830_GPIO4_7,
+	DA830_GPIO4_8,
+	DA830_GPIO4_9,
+	DA830_GPIO0_0,
+	DA830_GPIO0_1,
+	DA830_EMA_D_2,
+	DA830_EMA_D_3,
+	DA830_EMA_D_4,
+	DA830_EMA_D_5,
+	DA830_EMA_D_6,
+	DA830_EMA_D_7,
+	DA830_EMA_D_8,
+	DA830_EMA_D_9,
+	DA830_MMCSD_DAT_2,
+	DA830_MMCSD_DAT_3,
+	DA830_MMCSD_DAT_4,
+	DA830_MMCSD_DAT_5,
+	DA830_MMCSD_DAT_6,
+	DA830_MMCSD_DAT_7,
+	DA830_UHPI_HD_8,
+	DA830_UHPI_HD_9,
+	DA830_UHPI_HD_2,
+	DA830_UHPI_HD_3,
+	DA830_UHPI_HD_4,
+	DA830_UHPI_HD_5,
+	DA830_UHPI_HD_6,
+	DA830_UHPI_HD_7,
+	DA830_LCD_D_8,
+	DA830_LCD_D_9,
+	DA830_GPIO0_2,
+	DA830_GPIO0_3,
+	DA830_GPIO0_4,
+	DA830_GPIO0_5,
+	DA830_GPIO0_6,
+	DA830_GPIO0_7,
+	DA830_GPIO0_8,
+	DA830_GPIO0_9,
+	DA830_EMA_D_10,
+	DA830_EMA_D_11,
+	DA830_EMA_D_12,
+	DA830_EMA_D_13,
+	DA830_EMA_D_14,
+	DA830_EMA_D_15,
+	DA830_EMA_A_0,
+	DA830_EMA_A_1,
+	DA830_UHPI_HD_10,
+	DA830_UHPI_HD_11,
+	DA830_UHPI_HD_12,
+	DA830_UHPI_HD_13,
+	DA830_UHPI_HD_14,
+	DA830_UHPI_HD_15,
+	DA830_LCD_D_7,
+	DA830_MMCSD_CLK,
+	DA830_LCD_D_10,
+	DA830_LCD_D_11,
+	DA830_LCD_D_12,
+	DA830_LCD_D_13,
+	DA830_LCD_D_14,
+	DA830_LCD_D_15,
+	DA830_UHPI_HCNTL0,
+	DA830_GPIO0_10,
+	DA830_GPIO0_11,
+	DA830_GPIO0_12,
+	DA830_GPIO0_13,
+	DA830_GPIO0_14,
+	DA830_GPIO0_15,
+	DA830_GPIO1_0,
+	DA830_GPIO1_1,
+	DA830_EMA_A_2,
+	DA830_EMA_A_3,
+	DA830_EMA_A_4,
+	DA830_EMA_A_5,
+	DA830_EMA_A_6,
+	DA830_EMA_A_7,
+	DA830_EMA_A_8,
+	DA830_EMA_A_9,
+	DA830_MMCSD_CMD,
+	DA830_LCD_D_6,
+	DA830_LCD_D_3,
+	DA830_LCD_D_2,
+	DA830_LCD_D_1,
+	DA830_LCD_D_0,
+	DA830_LCD_PCLK,
+	DA830_LCD_HSYNC,
+	DA830_UHPI_HCNTL1,
+	DA830_GPIO1_2,
+	DA830_GPIO1_3,
+	DA830_GPIO1_4,
+	DA830_GPIO1_5,
+	DA830_GPIO1_6,
+	DA830_GPIO1_7,
+	DA830_GPIO1_8,
+	DA830_GPIO1_9,
+	DA830_EMA_A_10,
+	DA830_EMA_A_11,
+	DA830_EMA_A_12,
+	DA830_EMA_BA_1,
+	DA830_EMA_BA_0,
+	DA830_EMA_CLK,
+	DA830_EMA_SDCKE,
+	DA830_NEMA_CAS,
+	DA830_LCD_VSYNC,
+	DA830_NLCD_AC_ENB_CS,
+	DA830_LCD_MCLK,
+	DA830_LCD_D_5,
+	DA830_LCD_D_4,
+	DA830_OBSCLK,
+	DA830_NEMA_CS_4,
+	DA830_UHPI_HHWIL,
+	DA830_AHCLKR2,
+	DA830_GPIO1_10,
+	DA830_GPIO1_11,
+	DA830_GPIO1_12,
+	DA830_GPIO1_13,
+	DA830_GPIO1_14,
+	DA830_GPIO1_15,
+	DA830_GPIO2_0,
+	DA830_GPIO2_1,
+	DA830_NEMA_RAS,
+	DA830_NEMA_WE,
+	DA830_NEMA_CS_0,
+	DA830_NEMA_CS_2,
+	DA830_NEMA_CS_3,
+	DA830_NEMA_OE,
+	DA830_NEMA_WE_DQM_1,
+	DA830_NEMA_WE_DQM_0,
+	DA830_NEMA_CS_5,
+	DA830_UHPI_HRNW,
+	DA830_NUHPI_HAS,
+	DA830_NUHPI_HCS,
+	DA830_NUHPI_HDS1,
+	DA830_NUHPI_HDS2,
+	DA830_NUHPI_HINT,
+	DA830_AXR0_12,
+	DA830_AMUTE2,
+	DA830_AXR0_13,
+	DA830_AXR0_14,
+	DA830_AXR0_15,
+	DA830_GPIO2_2,
+	DA830_GPIO2_3,
+	DA830_GPIO2_4,
+	DA830_GPIO2_5,
+	DA830_GPIO2_6,
+	DA830_GPIO2_7,
+	DA830_GPIO2_8,
+	DA830_GPIO2_9,
+	DA830_EMA_WAIT_0,
+	DA830_NUHPI_HRDY,
+	DA830_GPIO2_10,
+};
+
+enum davinci_da850_index {
+	/* UART0 function */
+	DA850_NUART0_CTS,
+	DA850_NUART0_RTS,
+	DA850_UART0_RXD,
+	DA850_UART0_TXD,
+
+	/* UART1 function */
+	DA850_NUART1_CTS,
+	DA850_NUART1_RTS,
+	DA850_UART1_RXD,
+	DA850_UART1_TXD,
+
+	/* UART2 function */
+	DA850_NUART2_CTS,
+	DA850_NUART2_RTS,
+	DA850_UART2_RXD,
+	DA850_UART2_TXD,
+
+	/* I2C1 function */
+	DA850_I2C1_SCL,
+	DA850_I2C1_SDA,
+
+	/* I2C0 function */
+	DA850_I2C0_SDA,
+	DA850_I2C0_SCL,
+
+	/* EMAC function */
+	DA850_MII_TXEN,
+	DA850_MII_TXCLK,
+	DA850_MII_COL,
+	DA850_MII_TXD_3,
+	DA850_MII_TXD_2,
+	DA850_MII_TXD_1,
+	DA850_MII_TXD_0,
+	DA850_MII_RXER,
+	DA850_MII_CRS,
+	DA850_MII_RXCLK,
+	DA850_MII_RXDV,
+	DA850_MII_RXD_3,
+	DA850_MII_RXD_2,
+	DA850_MII_RXD_1,
+	DA850_MII_RXD_0,
+	DA850_MDIO_CLK,
+	DA850_MDIO_D,
+	DA850_RMII_TXD_0,
+	DA850_RMII_TXD_1,
+	DA850_RMII_TXEN,
+	DA850_RMII_CRS_DV,
+	DA850_RMII_RXD_0,
+	DA850_RMII_RXD_1,
+	DA850_RMII_RXER,
+	DA850_RMII_MHZ_50_CLK,
+
+	/* McASP function */
+	DA850_ACLKR,
+	DA850_ACLKX,
+	DA850_AFSR,
+	DA850_AFSX,
+	DA850_AHCLKR,
+	DA850_AHCLKX,
+	DA850_AMUTE,
+	DA850_AXR_15,
+	DA850_AXR_14,
+	DA850_AXR_13,
+	DA850_AXR_12,
+	DA850_AXR_11,
+	DA850_AXR_10,
+	DA850_AXR_9,
+	DA850_AXR_8,
+	DA850_AXR_7,
+	DA850_AXR_6,
+	DA850_AXR_5,
+	DA850_AXR_4,
+	DA850_AXR_3,
+	DA850_AXR_2,
+	DA850_AXR_1,
+	DA850_AXR_0,
+
+	/* LCD function */
+	DA850_LCD_D_7,
+	DA850_LCD_D_6,
+	DA850_LCD_D_5,
+	DA850_LCD_D_4,
+	DA850_LCD_D_3,
+	DA850_LCD_D_2,
+	DA850_LCD_D_1,
+	DA850_LCD_D_0,
+	DA850_LCD_D_15,
+	DA850_LCD_D_14,
+	DA850_LCD_D_13,
+	DA850_LCD_D_12,
+	DA850_LCD_D_11,
+	DA850_LCD_D_10,
+	DA850_LCD_D_9,
+	DA850_LCD_D_8,
+	DA850_LCD_PCLK,
+	DA850_LCD_HSYNC,
+	DA850_LCD_VSYNC,
+	DA850_NLCD_AC_ENB_CS,
+
+	/* MMC/SD0 function */
+	DA850_MMCSD0_DAT_0,
+	DA850_MMCSD0_DAT_1,
+	DA850_MMCSD0_DAT_2,
+	DA850_MMCSD0_DAT_3,
+	DA850_MMCSD0_CLK,
+	DA850_MMCSD0_CMD,
+
+	/* MMC/SD1 function */
+	DA850_MMCSD1_DAT_0,
+	DA850_MMCSD1_DAT_1,
+	DA850_MMCSD1_DAT_2,
+	DA850_MMCSD1_DAT_3,
+	DA850_MMCSD1_CLK,
+	DA850_MMCSD1_CMD,
+
+	/* EMIF2.5/EMIFA function */
+	DA850_EMA_D_7,
+	DA850_EMA_D_6,
+	DA850_EMA_D_5,
+	DA850_EMA_D_4,
+	DA850_EMA_D_3,
+	DA850_EMA_D_2,
+	DA850_EMA_D_1,
+	DA850_EMA_D_0,
+	DA850_EMA_A_1,
+	DA850_EMA_A_2,
+	DA850_NEMA_CS_3,
+	DA850_NEMA_CS_4,
+	DA850_NEMA_WE,
+	DA850_NEMA_OE,
+	DA850_EMA_D_15,
+	DA850_EMA_D_14,
+	DA850_EMA_D_13,
+	DA850_EMA_D_12,
+	DA850_EMA_D_11,
+	DA850_EMA_D_10,
+	DA850_EMA_D_9,
+	DA850_EMA_D_8,
+	DA850_EMA_A_0,
+	DA850_EMA_A_3,
+	DA850_EMA_A_4,
+	DA850_EMA_A_5,
+	DA850_EMA_A_6,
+	DA850_EMA_A_7,
+	DA850_EMA_A_8,
+	DA850_EMA_A_9,
+	DA850_EMA_A_10,
+	DA850_EMA_A_11,
+	DA850_EMA_A_12,
+	DA850_EMA_A_13,
+	DA850_EMA_A_14,
+	DA850_EMA_A_15,
+	DA850_EMA_A_16,
+	DA850_EMA_A_17,
+	DA850_EMA_A_18,
+	DA850_EMA_A_19,
+	DA850_EMA_A_20,
+	DA850_EMA_A_21,
+	DA850_EMA_A_22,
+	DA850_EMA_A_23,
+	DA850_EMA_BA_1,
+	DA850_EMA_CLK,
+	DA850_EMA_WAIT_1,
+	DA850_NEMA_CS_2,
+
+	/* GPIO function */
+	DA850_GPIO2_4,
+	DA850_GPIO2_6,
+	DA850_GPIO2_8,
+	DA850_GPIO2_15,
+	DA850_GPIO3_12,
+	DA850_GPIO3_13,
+	DA850_GPIO4_0,
+	DA850_GPIO4_1,
+	DA850_GPIO6_9,
+	DA850_GPIO6_10,
+	DA850_GPIO6_13,
+	DA850_RTC_ALARM,
+
+	/* VPIF Capture */
+	DA850_VPIF_DIN0,
+	DA850_VPIF_DIN1,
+	DA850_VPIF_DIN2,
+	DA850_VPIF_DIN3,
+	DA850_VPIF_DIN4,
+	DA850_VPIF_DIN5,
+	DA850_VPIF_DIN6,
+	DA850_VPIF_DIN7,
+	DA850_VPIF_DIN8,
+	DA850_VPIF_DIN9,
+	DA850_VPIF_DIN10,
+	DA850_VPIF_DIN11,
+	DA850_VPIF_DIN12,
+	DA850_VPIF_DIN13,
+	DA850_VPIF_DIN14,
+	DA850_VPIF_DIN15,
+	DA850_VPIF_CLKIN0,
+	DA850_VPIF_CLKIN1,
+	DA850_VPIF_CLKIN2,
+	DA850_VPIF_CLKIN3,
+
+	/* VPIF Display */
+	DA850_VPIF_DOUT0,
+	DA850_VPIF_DOUT1,
+	DA850_VPIF_DOUT2,
+	DA850_VPIF_DOUT3,
+	DA850_VPIF_DOUT4,
+	DA850_VPIF_DOUT5,
+	DA850_VPIF_DOUT6,
+	DA850_VPIF_DOUT7,
+	DA850_VPIF_DOUT8,
+	DA850_VPIF_DOUT9,
+	DA850_VPIF_DOUT10,
+	DA850_VPIF_DOUT11,
+	DA850_VPIF_DOUT12,
+	DA850_VPIF_DOUT13,
+	DA850_VPIF_DOUT14,
+	DA850_VPIF_DOUT15,
+	DA850_VPIF_CLKO2,
+	DA850_VPIF_CLKO3,
+};
+
+#define PINMUX(x)		(4 * (x))
+
+#ifdef CONFIG_DAVINCI_MUX
+/* setup pin muxing */
+extern int davinci_cfg_reg(unsigned long reg_cfg);
+extern int davinci_cfg_reg_list(const short pins[]);
+#else
+/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
+static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
+static inline int davinci_cfg_reg_list(const short pins[])
+{
+	return 0;
+}
+#endif
+
 
 #define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\
 [soc##_##desc] = {							\
diff --git a/arch/arm/mach-davinci/pdata-quirks.c b/arch/arm/mach-davinci/pdata-quirks.c
index 67f1c8537354..b8b5f1a5e092 100644
--- a/arch/arm/mach-davinci/pdata-quirks.c
+++ b/arch/arm/mach-davinci/pdata-quirks.c
@@ -10,8 +10,8 @@
 #include <media/i2c/tvp514x.h>
 #include <media/i2c/adv7343.h>
 
-#include <mach/common.h>
-#include <mach/da8xx.h>
+#include "common.h"
+#include "da8xx.h"
 
 struct pdata_init {
 	const char *compatible;
diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c
index 323ee4e657c4..8aa39db095d7 100644
--- a/arch/arm/mach-davinci/pm.c
+++ b/arch/arm/mach-davinci/pm.c
@@ -16,11 +16,10 @@
 #include <asm/delay.h>
 #include <asm/io.h>
 
-#include <mach/common.h>
-#include <mach/da8xx.h>
-#include <mach/mux.h>
-#include <mach/pm.h>
-
+#include "common.h"
+#include "da8xx.h"
+#include "mux.h"
+#include "pm.h"
 #include "clock.h"
 #include "psc.h"
 #include "sram.h"
diff --git a/arch/arm/mach-davinci/pm.h b/arch/arm/mach-davinci/pm.h
new file mode 100644
index 000000000000..6f50d6eb8da8
--- /dev/null
+++ b/arch/arm/mach-davinci/pm.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * TI DaVinci platform support for power management.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc. https://www.ti.com/
+ */
+#ifndef _MACH_DAVINCI_PM_H
+#define _MACH_DAVINCI_PM_H
+
+/*
+ * Caution: Assembly code in sleep.S makes assumtion on the order
+ * of the members of this structure.
+ */
+struct davinci_pm_config {
+	void __iomem *ddr2_ctlr_base;
+	void __iomem *ddrpsc_reg_base;
+	int ddrpsc_num;
+	void __iomem *ddrpll_reg_base;
+	void __iomem *deepsleep_reg;
+	void __iomem *cpupll_reg_base;
+	/*
+	 * Note on SLEEPCOUNT:
+	 * The SLEEPCOUNT feature is mainly intended for cases in which
+	 * the internal oscillator is used. The internal oscillator is
+	 * fully disabled in deep sleep mode.  When you exist deep sleep
+	 * mode, the oscillator will be turned on and will generate very
+	 * small oscillations which will not be detected by the deep sleep
+	 * counter.  Eventually those oscillations will grow to an amplitude
+	 * large enough to start incrementing the deep sleep counter.
+	 * In this case recommendation from hardware engineers is that the
+	 * SLEEPCOUNT be set to 4096.  This means that 4096 valid clock cycles
+	 * must be detected before the clock is passed to the rest of the
+	 * system.
+	 * In the case that the internal oscillator is not used and the
+	 * clock is generated externally, the SLEEPCOUNT value can be very
+	 * small since the clock input is assumed to be stable before SoC
+	 * is taken out of deepsleep mode.  A value of 128 would be more than
+	 * adequate.
+	 */
+	int sleepcount;
+};
+
+extern unsigned int davinci_cpu_suspend_sz;
+extern void davinci_cpu_suspend(struct davinci_pm_config *);
+
+#endif
diff --git a/arch/arm/mach-davinci/pm_domain.c b/arch/arm/mach-davinci/pm_domain.c
index e251fd593bfd..6b21d5bd999c 100644
--- a/arch/arm/mach-davinci/pm_domain.c
+++ b/arch/arm/mach-davinci/pm_domain.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Runtime PM support code for DaVinci
  *
  * Author: Kevin Hilman
  *
  * Copyright (C) 2012 Texas Instruments, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/init.h>
 #include <linux/pm_runtime.h>
diff --git a/arch/arm/mach-davinci/psc.h b/arch/arm/mach-davinci/psc.h
index 68cd9d3fc82b..acfef063295f 100644
--- a/arch/arm/mach-davinci/psc.h
+++ b/arch/arm/mach-davinci/psc.h
@@ -70,70 +70,6 @@
 #define DAVINCI_LPSC_GEM		39
 #define DAVINCI_LPSC_IMCOP		40
 
-#define DM355_LPSC_TIMER3		5
-#define DM355_LPSC_SPI1			6
-#define DM355_LPSC_MMC_SD1		7
-#define DM355_LPSC_McBSP1		8
-#define DM355_LPSC_PWM3			10
-#define DM355_LPSC_SPI2			11
-#define DM355_LPSC_RTO			12
-#define DM355_LPSC_VPSS_DAC		41
-
-/* DM365 */
-#define DM365_LPSC_TIMER3	5
-#define DM365_LPSC_SPI1		6
-#define DM365_LPSC_MMC_SD1	7
-#define DM365_LPSC_McBSP1	8
-#define DM365_LPSC_PWM3		10
-#define DM365_LPSC_SPI2		11
-#define DM365_LPSC_RTO		12
-#define DM365_LPSC_TIMER4	17
-#define DM365_LPSC_SPI0		22
-#define DM365_LPSC_SPI3		38
-#define DM365_LPSC_SPI4		39
-#define DM365_LPSC_EMAC		40
-#define DM365_LPSC_VOICE_CODEC	44
-#define DM365_LPSC_DAC_CLK	46
-#define DM365_LPSC_VPSSMSTR	47
-#define DM365_LPSC_MJCP		50
-
-/*
- * LPSC Assignments
- */
-#define DM646X_LPSC_ARM		0
-#define DM646X_LPSC_C64X_CPU	1
-#define DM646X_LPSC_HDVICP0	2
-#define DM646X_LPSC_HDVICP1	3
-#define DM646X_LPSC_TPCC	4
-#define DM646X_LPSC_TPTC0	5
-#define DM646X_LPSC_TPTC1	6
-#define DM646X_LPSC_TPTC2	7
-#define DM646X_LPSC_TPTC3	8
-#define DM646X_LPSC_PCI		13
-#define DM646X_LPSC_EMAC	14
-#define DM646X_LPSC_VDCE	15
-#define DM646X_LPSC_VPSSMSTR	16
-#define DM646X_LPSC_VPSSSLV	17
-#define DM646X_LPSC_TSIF0	18
-#define DM646X_LPSC_TSIF1	19
-#define DM646X_LPSC_DDR_EMIF	20
-#define DM646X_LPSC_AEMIF	21
-#define DM646X_LPSC_McASP0	22
-#define DM646X_LPSC_McASP1	23
-#define DM646X_LPSC_CRGEN0	24
-#define DM646X_LPSC_CRGEN1	25
-#define DM646X_LPSC_UART0	26
-#define DM646X_LPSC_UART1	27
-#define DM646X_LPSC_UART2	28
-#define DM646X_LPSC_PWM0	29
-#define DM646X_LPSC_PWM1	30
-#define DM646X_LPSC_I2C		31
-#define DM646X_LPSC_SPI		32
-#define DM646X_LPSC_GPIO	33
-#define DM646X_LPSC_TIMER0	34
-#define DM646X_LPSC_TIMER1	35
-#define DM646X_LPSC_ARM_INTC	45
-
 /* PSC0 defines */
 #define DA8XX_LPSC0_TPCC		0
 #define DA8XX_LPSC0_TPTC0		1
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
deleted file mode 100644
index 127b62ce7b1e..000000000000
--- a/arch/arm/mach-davinci/serial.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * TI DaVinci serial driver
- *
- * Copyright (C) 2006 Texas Instruments.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/serial.h>
-#include <mach/cputype.h>
-
-static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
-				    int value)
-{
-	offset <<= p->regshift;
-
-	WARN_ONCE(!p->membase, "unmapped write: uart[%d]\n", offset);
-
-	__raw_writel(value, p->membase + offset);
-}
-
-static void __init davinci_serial_reset(struct plat_serial8250_port *p)
-{
-	unsigned int pwremu = 0;
-
-	serial_write_reg(p, UART_IER, 0);  /* disable all interrupts */
-
-	/* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
-	serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
-	mdelay(10);
-
-	pwremu |= (0x3 << 13);
-	pwremu |= 0x1;
-	serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
-
-	if (cpu_is_davinci_dm646x())
-		serial_write_reg(p, UART_DM646X_SCR,
-				 UART_DM646X_SCR_TX_WATERMARK);
-}
-
-int __init davinci_serial_init(struct platform_device *serial_dev)
-{
-	int i, ret = 0;
-	struct device *dev;
-	struct plat_serial8250_port *p;
-	struct clk *clk;
-
-	/*
-	 * Make sure the serial ports are muxed on at this point.
-	 * You have to mux them off in device drivers later on if not needed.
-	 */
-	for (i = 0; serial_dev[i].dev.platform_data != NULL; i++) {
-		dev = &serial_dev[i].dev;
-		p = dev->platform_data;
-
-		ret = platform_device_register(&serial_dev[i]);
-		if (ret)
-			continue;
-
-		clk = clk_get(dev, NULL);
-		if (IS_ERR(clk)) {
-			pr_err("%s:%d: failed to get UART%d clock\n",
-			       __func__, __LINE__, i);
-			continue;
-		}
-
-		clk_prepare_enable(clk);
-
-		p->uartclk = clk_get_rate(clk);
-
-		if (!p->membase && p->mapbase) {
-			p->membase = ioremap(p->mapbase, SZ_4K);
-
-			if (p->membase)
-				p->flags &= ~UPF_IOREMAP;
-			else
-				pr_err("uart regs ioremap failed\n");
-		}
-
-		if (p->membase && p->type != PORT_AR7)
-			davinci_serial_reset(p);
-	}
-	return ret;
-}
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
index bbae190fd82c..d04f39fc84b6 100644
--- a/arch/arm/mach-davinci/sram.c
+++ b/arch/arm/mach-davinci/sram.c
@@ -9,7 +9,7 @@
 #include <linux/io.h>
 #include <linux/genalloc.h>
 
-#include <mach/common.h>
+#include "common.h"
 #include "sram.h"
 
 static struct gen_pool *sram_pool;
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
deleted file mode 100644
index 25f21ee86f1a..000000000000
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * DA8xx USB
- */
-#include <linux/clk-provider.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/mfd/da8xx-cfgchip.h>
-#include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
-#include <linux/platform_data/clk-da8xx-cfgchip.h>
-#include <linux/platform_data/phy-da8xx-usb.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/da8xx.h>
-
-#include "irqs.h"
-
-#define DA8XX_USB0_BASE		0x01e00000
-#define DA8XX_USB1_BASE		0x01e25000
-
-#ifndef CONFIG_COMMON_CLK
-static struct clk *usb20_clk;
-#endif
-
-static struct da8xx_usb_phy_platform_data da8xx_usb_phy_pdata;
-
-static struct platform_device da8xx_usb_phy = {
-	.name		= "da8xx-usb-phy",
-	.id		= -1,
-	.dev		= {
-		/*
-		 * Setting init_name so that clock lookup will work in
-		 * da8xx_register_usb11_phy_clk() even if this device is not
-		 * registered yet.
-		 */
-		.init_name	= "da8xx-usb-phy",
-		.platform_data	= &da8xx_usb_phy_pdata,
-	},
-};
-
-int __init da8xx_register_usb_phy(void)
-{
-	da8xx_usb_phy_pdata.cfgchip = da8xx_get_cfgchip();
-
-	return platform_device_register(&da8xx_usb_phy);
-}
-
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= true,
-	.num_eps	= 5,
-	.ram_bits	= 10,
-};
-
-static struct musb_hdrc_platform_data usb_data = {
-	/* OTG requires a Mini-AB connector */
-	.mode           = MUSB_OTG,
-	.clock		= "usb20",
-	.config		= &musb_config,
-};
-
-static struct resource da8xx_usb20_resources[] = {
-	{
-		.start		= DA8XX_USB0_BASE,
-		.end		= DA8XX_USB0_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= DAVINCI_INTC_IRQ(IRQ_DA8XX_USB_INT),
-		.flags		= IORESOURCE_IRQ,
-		.name		= "mc",
-	},
-};
-
-static u64 usb_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device da8xx_usb20_dev = {
-	.name		= "musb-da8xx",
-	.id             = -1,
-	.dev = {
-		.platform_data		= &usb_data,
-		.dma_mask		= &usb_dmamask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.resource	= da8xx_usb20_resources,
-	.num_resources	= ARRAY_SIZE(da8xx_usb20_resources),
-};
-
-int __init da8xx_register_usb20(unsigned int mA, unsigned int potpgt)
-{
-	usb_data.power	= mA > 510 ? 255 : mA / 2;
-	usb_data.potpgt = (potpgt + 1) / 2;
-
-	return platform_device_register(&da8xx_usb20_dev);
-}
-
-static struct resource da8xx_usb11_resources[] = {
-	[0] = {
-		.start	= DA8XX_USB1_BASE,
-		.end	= DA8XX_USB1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_IRQN),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_IRQN),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device da8xx_usb11_device = {
-	.name		= "ohci-da8xx",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &da8xx_usb11_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(da8xx_usb11_resources),
-	.resource	= da8xx_usb11_resources,
-};
-
-int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
-{
-	da8xx_usb11_device.dev.platform_data = pdata;
-	return platform_device_register(&da8xx_usb11_device);
-}
-
-static struct platform_device da8xx_usb_phy_clks_device = {
-	.name		= "da830-usb-phy-clks",
-	.id		= -1,
-};
-
-int __init da8xx_register_usb_phy_clocks(void)
-{
-	struct da8xx_cfgchip_clk_platform_data pdata;
-
-	pdata.cfgchip = da8xx_get_cfgchip();
-	da8xx_usb_phy_clks_device.dev.platform_data = &pdata;
-
-	return platform_device_register(&da8xx_usb_phy_clks_device);
-}
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
deleted file mode 100644
index dd8db61cdd1c..000000000000
--- a/arch/arm/mach-davinci/usb.c
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * USB
- */
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/usb/musb.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-
-#include "irqs.h"
-
-#define DAVINCI_USB_OTG_BASE	0x01c64000
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= true,
-
-	.num_eps	= 5,
-	.ram_bits	= 10,
-};
-
-static struct musb_hdrc_platform_data usb_data = {
-	/* OTG requires a Mini-AB connector */
-	.mode           = MUSB_OTG,
-	.clock		= "usb",
-	.config		= &musb_config,
-};
-
-static struct resource usb_resources[] = {
-	{
-		/* physical address */
-		.start          = DAVINCI_USB_OTG_BASE,
-		.end            = DAVINCI_USB_OTG_BASE + 0x5ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_USBINT),
-		.flags          = IORESOURCE_IRQ,
-		.name		= "mc"
-	},
-	{
-		/* placeholder for the dedicated CPPI IRQ */
-		.flags          = IORESOURCE_IRQ,
-		.name		= "dma"
-	},
-};
-
-static u64 usb_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device usb_dev = {
-	.name           = "musb-davinci",
-	.id             = -1,
-	.dev = {
-		.platform_data		= &usb_data,
-		.dma_mask		= &usb_dmamask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.resource       = usb_resources,
-	.num_resources  = ARRAY_SIZE(usb_resources),
-};
-
-void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
-{
-	usb_data.power = mA > 510 ? 255 : mA / 2;
-	usb_data.potpgt = (potpgt_ms + 1) / 2;
-
-	if (cpu_is_davinci_dm646x()) {
-		/* Override the defaults as DM6467 uses different IRQs. */
-		usb_dev.resource[1].start = DAVINCI_INTC_IRQ(IRQ_DM646X_USBINT);
-		usb_dev.resource[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM646X_USBDMAINT);
-	} else	/* other devices don't have dedicated CPPI IRQ */
-		usb_dev.num_resources = 2;
-
-	platform_device_register(&usb_dev);
-}
-
-#else
-
-void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
-{
-}
-
-#endif  /* CONFIG_USB_MUSB_HDRC */
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index 7747fe64420a..996888ffcfe7 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -1,19 +1,23 @@
 # SPDX-License-Identifier: GPL-2.0
-if ARCH_DOVE
+menuconfig ARCH_DOVE
+	bool "Marvell Dove" if ARCH_MULTI_V7
+	depends on ATAGS
+	select CPU_PJ4
+	select GPIOLIB
+	select MVEBU_MBUS
+	select PINCTRL
+	select PINCTRL_DOVE
+	select PLAT_ORION_LEGACY
+	select PM_GENERIC_DOMAINS if PM
+	select PCI_QUIRKS if PCI
+	help
+	  Support for the Marvell Dove SoC 88AP510
 
-menu "Marvell Dove Implementations"
+if ARCH_DOVE
 
 config DOVE_LEGACY
 	bool
 
-config MACH_DOVE_DB
-	bool "Marvell DB-MV88AP510 Development Board"
-	select DOVE_LEGACY
-	select I2C_BOARDINFO if I2C
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell DB-MV88AP510 Development Board.
-
 config MACH_CM_A510
 	bool "CompuLab CM-A510 Board"
 	select DOVE_LEGACY
@@ -21,6 +25,4 @@ config MACH_CM_A510
 	  Say 'Y' here if you want your kernel to support the
 	  CompuLab CM-A510 Board.
 
-endmenu
-
 endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index cdf163cab738..0d31390be069 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
+ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
+
 obj-y				+= common.o
 obj-$(CONFIG_DOVE_LEGACY)	+= irq.o mpp.o
 obj-$(CONFIG_PCI)		+= pcie.o
-obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
 obj-$(CONFIG_MACH_CM_A510)	+= cm-a510.o
diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot
deleted file mode 100644
index e4dd1d26038f..000000000000
--- a/arch/arm/mach-dove/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-dove/bridge-regs.h b/arch/arm/mach-dove/bridge-regs.h
index ace0b0bfbf11..6fbc152d0950 100644
--- a/arch/arm/mach-dove/bridge-regs.h
+++ b/arch/arm/mach-dove/bridge-regs.h
@@ -1,10 +1,5 @@
-/*
- * Mbus-L to Mbus Bridge Registers
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Mbus-L to Mbus Bridge Registers */
 
 #ifndef __ASM_ARCH_BRIDGE_REGS_H
 #define __ASM_ARCH_BRIDGE_REGS_H
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index 9f25c993d863..beb532537c22 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-dove/cm-a510.c
  *
@@ -5,10 +6,6 @@
  * Konstantin Sinyuk <kostyas@compulab.co.il>
  *
  * Based on Marvell DB-MV88AP510-BP Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index dbe970e37895..cd4ae7e4768d 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-dove/common.c
  *
  * Core functions for Marvell Dove 88AP510 System On Chip
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/clk-provider.h>
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index 1d725224d146..57ebc413d68c 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * arch/arm/mach-dove/common.h
  *
  * Core functions for Marvell Dove 88AP510 System On Chip
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __ARCH_DOVE_COMMON_H
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
deleted file mode 100644
index 418ab21b9d9b..000000000000
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * arch/arm/mach-dove/dove-db-setup.c
- *
- * Marvell DB-MV88AP510-BP Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/timer.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/pci.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "dove.h"
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dove_db_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR_DEFAULT,
-};
-
-static struct mv_sata_platform_data dove_db_sata_data = {
-	.n_ports        = 1,
-};
-
-/*****************************************************************************
- * SPI Devices:
- * 	SPI0: 4M Flash ST-M25P32-VMF6P
- ****************************************************************************/
-static const struct flash_platform_data dove_db_spi_flash_data = {
-	.type		= "m25p64",
-};
-
-static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
-	{
-		.modalias       = "m25p80",
-		.platform_data  = &dove_db_spi_flash_data,
-		.irq            = -1,
-		.max_speed_hz   = 20000000,
-		.bus_num        = 0,
-		.chip_select    = 0,
-	},
-};
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-static int __init dove_db_pci_init(void)
-{
-	if (machine_is_dove_db())
-		dove_pcie_init(1, 1);
-
-	return 0;
-}
-
-subsys_initcall(dove_db_pci_init);
-
-/*****************************************************************************
- * Board Init
- ****************************************************************************/
-static void __init dove_db_init(void)
-{
-	/*
-	 * Basic Dove setup. Needs to be called early.
-	 */
-	dove_init();
-
-	dove_ge00_init(&dove_db_ge00_data);
-	dove_ehci0_init();
-	dove_ehci1_init();
-	dove_sata_init(&dove_db_sata_data);
-	dove_sdio0_init();
-	dove_sdio1_init();
-	dove_spi0_init();
-	dove_spi1_init();
-	dove_uart0_init();
-	dove_uart1_init();
-	dove_i2c_init();
-	spi_register_board_info(dove_db_spi_flash_info,
-				ARRAY_SIZE(dove_db_spi_flash_info));
-}
-
-MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
-	.atag_offset	= 0x100,
-	.nr_irqs	= DOVE_NR_IRQS,
-	.init_machine	= dove_db_init,
-	.map_io		= dove_map_io,
-	.init_early	= dove_init_early,
-	.init_irq	= dove_init_irq,
-	.init_time	= dove_timer_init,
-	.restart	= dove_restart,
-MACHINE_END
diff --git a/arch/arm/mach-dove/dove.h b/arch/arm/mach-dove/dove.h
index 320ed1696abd..e5054e3b0b78 100644
--- a/arch/arm/mach-dove/dove.h
+++ b/arch/arm/mach-dove/dove.h
@@ -1,10 +1,5 @@
-/*
- * Generic definitions for Marvell Dove 88AP510 SoC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Generic definitions for Marvell Dove 88AP510 SoC */
 
 #ifndef __ASM_ARCH_DOVE_H
 #define __ASM_ARCH_DOVE_H
diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h
deleted file mode 100644
index 7a4bd8838036..000000000000
--- a/arch/arm/mach-dove/include/mach/uncompress.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define UART0_PHYS_BASE (0xf1000000 + 0x12000)
-
-#define UART_THR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x0))
-#define UART_LSR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x14))
-
-#define LSR_THRE	0x20
-
-static void putc(const char c)
-{
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		/* Transmit fifo not full? */
-		if (*UART_LSR & LSR_THRE)
-			break;
-	}
-
-	*UART_THR = c;
-}
-
-static void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index 31ccbcee2627..027a8f87bc2e 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-dove/irq.c
  *
  * Dove IRQ handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/init.h>
 #include <linux/irq.h>
@@ -73,12 +70,12 @@ void __init dove_init_irq(void)
 	/*
 	 * Initialize gpiolib for GPIOs 0-71.
 	 */
-	orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
+	orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START, gpio0_irqs);
 
-	orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
+	orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 32, gpio1_irqs);
 
-	orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
+	orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
 }
diff --git a/arch/arm/mach-dove/irqs.h b/arch/arm/mach-dove/irqs.h
index a0742179faff..5467098c7042 100644
--- a/arch/arm/mach-dove/irqs.h
+++ b/arch/arm/mach-dove/irqs.h
@@ -1,10 +1,5 @@
-/*
- * IRQ definitions for Marvell Dove 88AP510 SoC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* IRQ definitions for Marvell Dove 88AP510 SoC */
 
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c
index 6acd8488bb05..93cb137da5f8 100644
--- a/arch/arm/mach-dove/mpp.c
+++ b/arch/arm/mach-dove/mpp.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-dove/mpp.c
  *
  * MPP functions for Marvell Dove SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index ee91ac6b5ebf..3044b7e03890 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-dove/pcie.c
  *
  * PCIe functions for Marvell Dove 88AP510 SoC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
@@ -38,6 +35,7 @@ static int num_pcie_ports;
 static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct pcie_port *pp;
+	struct resource realio;
 
 	if (nr >= num_pcie_ports)
 		return 0;
@@ -53,10 +51,10 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
 
 	orion_pcie_setup(pp->base);
 
-	if (pp->index == 0)
-		pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE0_IO_PHYS_BASE);
-	else
-		pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE1_IO_PHYS_BASE);
+	realio.start = sys->busnr * SZ_64K;
+	realio.end = realio.start + SZ_64K - 1;
+	pci_remap_iospace(&realio, pp->index == 0 ? DOVE_PCIE0_IO_PHYS_BASE :
+						    DOVE_PCIE1_IO_PHYS_BASE);
 
 	/*
 	 * IORESOURCE_MEM
@@ -135,18 +133,23 @@ static struct pci_ops pcie_ops = {
 	.write = pcie_wr_conf,
 };
 
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
 static void rc_pci_fixup(struct pci_dev *dev)
 {
-	/*
-	 * Prevent enumeration of root complex.
-	 */
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
-		int i;
-
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
+		struct resource *r;
+
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
+		pci_dev_for_each_resource(dev, r) {
+			r->start = 0;
+			r->end   = 0;
+			r->flags = 0;
 		}
 	}
 }
diff --git a/arch/arm/mach-dove/pm.h b/arch/arm/mach-dove/pm.h
index 01267746d707..a4c3aba1e2d0 100644
--- a/arch/arm/mach-dove/pm.h
+++ b/arch/arm/mach-dove/pm.h
@@ -1,8 +1,4 @@
-/*
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
 
 #ifndef __ASM_ARCH_PM_H
 #define __ASM_ARCH_PM_H
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index f2db5fd38145..703f3d232a60 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -1,4 +1,18 @@
 # SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_EP93XX
+	bool "EP93xx-based"
+	depends on ATAGS
+	depends on ARCH_MULTI_V4T
+	depends on CPU_LITTLE_ENDIAN
+	select ARCH_SPARSEMEM_ENABLE
+	select ARM_AMBA
+	select ARM_VIC
+	select CLKSRC_MMIO
+	select CPU_ARM920T
+	select GPIOLIB
+	help
+	  This enables support for the Cirrus EP93xx series of CPUs.
+
 if ARCH_EP93XX
 
 menu "Cirrus EP93xx Implementation Options"
@@ -9,19 +23,8 @@ config EP93XX_SOC_COMMON
 	select SOC_BUS
 	select LEDS_GPIO_REGISTER
 
-config CRUNCH
-	bool "Support for MaverickCrunch"
-	help
-	  Enable kernel support for MaverickCrunch.
-
 comment "EP93xx Platforms"
 
-config MACH_ADSSPHERE
-	bool "Support ADS Sphere"
-	help
-	  Say 'Y' here if you want your kernel to support the ADS
-	  Sphere board.
-
 config MACH_BK3
 	bool "Support Liebherr BK3.1"
 	select MACH_TS72XX
@@ -88,55 +91,6 @@ config MACH_EDB9315A
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315A Evaluation Board.
 
-config MACH_GESBC9312
-	bool "Support Glomation GESBC-9312-sx"
-	help
-	  Say 'Y' here if you want your kernel to support the Glomation
-	  GESBC-9312-sx board.
-
-config MACH_MICRO9
-	bool
-
-config MACH_MICRO9H
-	bool "Support Contec Micro9-High"
-	select MACH_MICRO9
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-High board.
-
-config MACH_MICRO9M
-	bool "Support Contec Micro9-Mid"
-	select MACH_MICRO9
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-Mid board.
-
-config MACH_MICRO9L
-	bool "Support Contec Micro9-Lite"
-	select MACH_MICRO9
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-Lite board.
-
-config MACH_MICRO9S
-	bool "Support Contec Micro9-Slim"
-	select MACH_MICRO9
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-Slim board.
-
-config MACH_SIM_ONE
-        bool "Support Simplemachines Sim.One board"
-        help
-          Say 'Y' here if you want your kernel to support the
-          Simplemachines Sim.One board.
-
-config MACH_SNAPPER_CL15
-	bool "Support Bluewater Systems Snapper CL15 Module"
-	help
-	  Say 'Y' here if you want your kernel to support the Bluewater
-	  Systems Snapper CL15 Module.
-
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
 	help
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 86768495f61d..62e37403df14 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -6,14 +6,6 @@ obj-y			:= core.o clock.o timer-ep93xx.o
 
 obj-$(CONFIG_EP93XX_DMA)	+= dma.o
 
-obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
-AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
-
-obj-$(CONFIG_MACH_ADSSPHERE)	+= adssphere.o
 obj-$(CONFIG_MACH_EDB93XX)	+= edb93xx.o
-obj-$(CONFIG_MACH_GESBC9312)	+= gesbc9312.o
-obj-$(CONFIG_MACH_MICRO9)	+= micro9.o
-obj-$(CONFIG_MACH_SIM_ONE)	+= simone.o
-obj-$(CONFIG_MACH_SNAPPER_CL15)	+= snappercl15.o
 obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o
 obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o
diff --git a/arch/arm/mach-ep93xx/Makefile.boot b/arch/arm/mach-ep93xx/Makefile.boot
deleted file mode 100644
index 4c0a039a5027..000000000000
--- a/arch/arm/mach-ep93xx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Empty file waiting for deletion once Makefile.boot isn't needed any more.
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
deleted file mode 100644
index 57cfd8ebe04f..000000000000
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/adssphere.c
- * ADS Sphere support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sizes.h>
-
-#include "hardware.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata adssphere_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init adssphere_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
-	ep93xx_register_eth(&adssphere_eth_data, 1);
-}
-
-MACHINE_START(ADSSPHERE, "ADS Sphere board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= adssphere_init_machine,
-	.init_late	= ep93xx_init_late,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 2810eb5b2aca..85a496ddc619 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -16,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 #include <linux/soc/cirrus/ep93xx.h>
 
 #include "hardware.h"
@@ -24,348 +25,196 @@
 
 #include "soc.h"
 
-struct clk {
-	struct clk	*parent;
-	unsigned long	rate;
-	int		users;
-	int		sw_locked;
-	void __iomem	*enable_reg;
-	u32		enable_mask;
-
-	unsigned long	(*get_rate)(struct clk *clk);
-	int		(*set_rate)(struct clk *clk, unsigned long rate);
-};
-
-
-static unsigned long get_uart_rate(struct clk *clk);
-
-static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
-static int set_div_rate(struct clk *clk, unsigned long rate);
-static int set_i2s_sclk_rate(struct clk *clk, unsigned long rate);
-static int set_i2s_lrclk_rate(struct clk *clk, unsigned long rate);
+static DEFINE_SPINLOCK(clk_lock);
 
-static struct clk clk_xtali = {
-	.rate		= EP93XX_EXT_CLK_RATE,
-};
-static struct clk clk_uart1 = {
-	.parent		= &clk_xtali,
-	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVCFG,
-	.enable_mask	= EP93XX_SYSCON_DEVCFG_U1EN,
-	.get_rate	= get_uart_rate,
-};
-static struct clk clk_uart2 = {
-	.parent		= &clk_xtali,
-	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVCFG,
-	.enable_mask	= EP93XX_SYSCON_DEVCFG_U2EN,
-	.get_rate	= get_uart_rate,
-};
-static struct clk clk_uart3 = {
-	.parent		= &clk_xtali,
-	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVCFG,
-	.enable_mask	= EP93XX_SYSCON_DEVCFG_U3EN,
-	.get_rate	= get_uart_rate,
-};
-static struct clk clk_pll1 = {
-	.parent		= &clk_xtali,
-};
-static struct clk clk_f = {
-	.parent		= &clk_pll1,
-};
-static struct clk clk_h = {
-	.parent		= &clk_pll1,
-};
-static struct clk clk_p = {
-	.parent		= &clk_pll1,
-};
-static struct clk clk_pll2 = {
-	.parent		= &clk_xtali,
-};
-static struct clk clk_usb_host = {
-	.parent		= &clk_pll2,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
-};
-static struct clk clk_keypad = {
-	.parent		= &clk_xtali,
-	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_KEYTCHCLKDIV,
-	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
-	.set_rate	= set_keytchclk_rate,
-};
-static struct clk clk_adc = {
-	.parent		= &clk_xtali,
-	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_KEYTCHCLKDIV,
-	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_TSEN,
-	.set_rate	= set_keytchclk_rate,
-};
-static struct clk clk_spi = {
-	.parent		= &clk_xtali,
-	.rate		= EP93XX_EXT_CLK_RATE,
-};
-static struct clk clk_pwm = {
-	.parent		= &clk_xtali,
-	.rate		= EP93XX_EXT_CLK_RATE,
-};
+static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
+static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
+static char pclk_divisors[] = { 1, 2, 4, 8 };
 
-static struct clk clk_video = {
-	.sw_locked	= 1,
-	.enable_reg     = EP93XX_SYSCON_VIDCLKDIV,
-	.enable_mask    = EP93XX_SYSCON_CLKDIV_ENABLE,
-	.set_rate	= set_div_rate,
-};
+static char adc_divisors[] = { 16, 4 };
+static char sclk_divisors[] = { 2, 4 };
+static char lrclk_divisors[] = { 32, 64, 128 };
 
-static struct clk clk_i2s_mclk = {
-	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_I2SCLKDIV,
-	.enable_mask	= EP93XX_SYSCON_CLKDIV_ENABLE,
-	.set_rate	= set_div_rate,
+static const char * const mux_parents[] = {
+	"xtali",
+	"pll1",
+	"pll2"
 };
 
-static struct clk clk_i2s_sclk = {
-	.sw_locked	= 1,
-	.parent		= &clk_i2s_mclk,
-	.enable_reg	= EP93XX_SYSCON_I2SCLKDIV,
-	.enable_mask	= EP93XX_SYSCON_I2SCLKDIV_SENA,
-	.set_rate	= set_i2s_sclk_rate,
-};
+/*
+ * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS
+ */
+static unsigned long calc_pll_rate(unsigned long long rate, u32 config_word)
+{
+	int i;
 
-static struct clk clk_i2s_lrclk = {
-	.sw_locked	= 1,
-	.parent		= &clk_i2s_sclk,
-	.enable_reg	= EP93XX_SYSCON_I2SCLKDIV,
-	.enable_mask	= EP93XX_SYSCON_I2SCLKDIV_SENA,
-	.set_rate	= set_i2s_lrclk_rate,
-};
+	rate *= ((config_word >> 11) & 0x1f) + 1;		/* X1FBD */
+	rate *= ((config_word >> 5) & 0x3f) + 1;		/* X2FBD */
+	do_div(rate, (config_word & 0x1f) + 1);			/* X2IPD */
+	for (i = 0; i < ((config_word >> 16) & 3); i++)		/* PS */
+		rate >>= 1;
 
-/* DMA Clocks */
-static struct clk clk_m2p0 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P0,
-};
-static struct clk clk_m2p1 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P1,
-};
-static struct clk clk_m2p2 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P2,
-};
-static struct clk clk_m2p3 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P3,
-};
-static struct clk clk_m2p4 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P4,
-};
-static struct clk clk_m2p5 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P5,
-};
-static struct clk clk_m2p6 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P6,
-};
-static struct clk clk_m2p7 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P7,
-};
-static struct clk clk_m2p8 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P8,
-};
-static struct clk clk_m2p9 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P9,
-};
-static struct clk clk_m2m0 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M0,
-};
-static struct clk clk_m2m1 = {
-	.parent		= &clk_h,
-	.enable_reg	= EP93XX_SYSCON_PWRCNT,
-	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M1,
-};
+	return (unsigned long)rate;
+}
 
-#define INIT_CK(dev,con,ck)					\
-	{ .dev_id = dev, .con_id = con, .clk = ck }
-
-static struct clk_lookup clocks[] = {
-	INIT_CK(NULL,			"xtali",	&clk_xtali),
-	INIT_CK("apb:uart1",		NULL,		&clk_uart1),
-	INIT_CK("apb:uart2",		NULL,		&clk_uart2),
-	INIT_CK("apb:uart3",		NULL,		&clk_uart3),
-	INIT_CK(NULL,			"pll1",		&clk_pll1),
-	INIT_CK(NULL,			"fclk",		&clk_f),
-	INIT_CK(NULL,			"hclk",		&clk_h),
-	INIT_CK(NULL,			"apb_pclk",	&clk_p),
-	INIT_CK(NULL,			"pll2",		&clk_pll2),
-	INIT_CK("ohci-platform",	NULL,		&clk_usb_host),
-	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
-	INIT_CK("ep93xx-adc",		NULL,		&clk_adc),
-	INIT_CK("ep93xx-fb",		NULL,		&clk_video),
-	INIT_CK("ep93xx-spi.0",		NULL,		&clk_spi),
-	INIT_CK("ep93xx-i2s",		"mclk",		&clk_i2s_mclk),
-	INIT_CK("ep93xx-i2s",		"sclk",		&clk_i2s_sclk),
-	INIT_CK("ep93xx-i2s",		"lrclk",	&clk_i2s_lrclk),
-	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),
-	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
-	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
-	INIT_CK(NULL,			"m2p2",		&clk_m2p2),
-	INIT_CK(NULL,			"m2p3",		&clk_m2p3),
-	INIT_CK(NULL,			"m2p4",		&clk_m2p4),
-	INIT_CK(NULL,			"m2p5",		&clk_m2p5),
-	INIT_CK(NULL,			"m2p6",		&clk_m2p6),
-	INIT_CK(NULL,			"m2p7",		&clk_m2p7),
-	INIT_CK(NULL,			"m2p8",		&clk_m2p8),
-	INIT_CK(NULL,			"m2p9",		&clk_m2p9),
-	INIT_CK(NULL,			"m2m0",		&clk_m2m0),
-	INIT_CK(NULL,			"m2m1",		&clk_m2m1),
+struct clk_psc {
+	struct clk_hw hw;
+	void __iomem *reg;
+	u8 bit_idx;
+	u32 mask;
+	u8 shift;
+	u8 width;
+	char *div;
+	u8 num_div;
+	spinlock_t *lock;
 };
 
-static DEFINE_SPINLOCK(clk_lock);
+#define to_clk_psc(_hw) container_of(_hw, struct clk_psc, hw)
 
-static void __clk_enable(struct clk *clk)
+static int ep93xx_clk_is_enabled(struct clk_hw *hw)
 {
-	if (!clk->users++) {
-		if (clk->parent)
-			__clk_enable(clk->parent);
-
-		if (clk->enable_reg) {
-			u32 v;
-
-			v = __raw_readl(clk->enable_reg);
-			v |= clk->enable_mask;
-			if (clk->sw_locked)
-				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
-			else
-				__raw_writel(v, clk->enable_reg);
-		}
-	}
+	struct clk_psc *psc = to_clk_psc(hw);
+	u32 val = readl(psc->reg);
+
+	return (val & BIT(psc->bit_idx)) ? 1 : 0;
 }
 
-int clk_enable(struct clk *clk)
+static int ep93xx_clk_enable(struct clk_hw *hw)
 {
-	unsigned long flags;
+	struct clk_psc *psc = to_clk_psc(hw);
+	unsigned long flags = 0;
+	u32 val;
 
-	if (!clk)
-		return -EINVAL;
+	if (psc->lock)
+		spin_lock_irqsave(psc->lock, flags);
 
-	spin_lock_irqsave(&clk_lock, flags);
-	__clk_enable(clk);
-	spin_unlock_irqrestore(&clk_lock, flags);
+	val = __raw_readl(psc->reg);
+	val |= BIT(psc->bit_idx);
+
+	ep93xx_syscon_swlocked_write(val, psc->reg);
+
+	if (psc->lock)
+		spin_unlock_irqrestore(psc->lock, flags);
 
 	return 0;
 }
-EXPORT_SYMBOL(clk_enable);
 
-static void __clk_disable(struct clk *clk)
+static void ep93xx_clk_disable(struct clk_hw *hw)
 {
-	if (!--clk->users) {
-		if (clk->enable_reg) {
-			u32 v;
-
-			v = __raw_readl(clk->enable_reg);
-			v &= ~clk->enable_mask;
-			if (clk->sw_locked)
-				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
-			else
-				__raw_writel(v, clk->enable_reg);
-		}
+	struct clk_psc *psc = to_clk_psc(hw);
+	unsigned long flags = 0;
+	u32 val;
 
-		if (clk->parent)
-			__clk_disable(clk->parent);
-	}
-}
+	if (psc->lock)
+		spin_lock_irqsave(psc->lock, flags);
 
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
+	val = __raw_readl(psc->reg);
+	val &= ~BIT(psc->bit_idx);
 
-	if (!clk)
-		return;
+	ep93xx_syscon_swlocked_write(val, psc->reg);
 
-	spin_lock_irqsave(&clk_lock, flags);
-	__clk_disable(clk);
-	spin_unlock_irqrestore(&clk_lock, flags);
+	if (psc->lock)
+		spin_unlock_irqrestore(psc->lock, flags);
 }
-EXPORT_SYMBOL(clk_disable);
 
-static unsigned long get_uart_rate(struct clk *clk)
+static const struct clk_ops clk_ep93xx_gate_ops = {
+	.enable = ep93xx_clk_enable,
+	.disable = ep93xx_clk_disable,
+	.is_enabled = ep93xx_clk_is_enabled,
+};
+
+static struct clk_hw *ep93xx_clk_register_gate(const char *name,
+				    const char *parent_name,
+				    void __iomem *reg,
+				    u8 bit_idx)
 {
-	unsigned long rate = clk_get_rate(clk->parent);
-	u32 value;
+	struct clk_init_data init;
+	struct clk_psc *psc;
+	struct clk *clk;
+
+	psc = kzalloc(sizeof(*psc), GFP_KERNEL);
+	if (!psc)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_ep93xx_gate_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	psc->reg = reg;
+	psc->bit_idx = bit_idx;
+	psc->hw.init = &init;
+	psc->lock = &clk_lock;
+
+	clk = clk_register(NULL, &psc->hw);
+	if (IS_ERR(clk)) {
+		kfree(psc);
+		return ERR_CAST(clk);
+	}
 
-	value = __raw_readl(EP93XX_SYSCON_PWRCNT);
-	if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
-		return rate;
-	else
-		return rate / 2;
+	return &psc->hw;
 }
 
-unsigned long clk_get_rate(struct clk *clk)
+static u8 ep93xx_mux_get_parent(struct clk_hw *hw)
 {
-	if (clk->get_rate)
-		return clk->get_rate(clk);
+	struct clk_psc *psc = to_clk_psc(hw);
+	u32 val = __raw_readl(psc->reg);
+
+	if (!(val & EP93XX_SYSCON_CLKDIV_ESEL))
+		return 0;
 
-	return clk->rate;
+	if (!(val & EP93XX_SYSCON_CLKDIV_PSEL))
+		return 1;
+
+	return 2;
 }
-EXPORT_SYMBOL(clk_get_rate);
 
-static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
+static int ep93xx_mux_set_parent_lock(struct clk_hw *hw, u8 index)
 {
+	struct clk_psc *psc = to_clk_psc(hw);
+	unsigned long flags = 0;
 	u32 val;
-	u32 div_bit;
 
-	val = __raw_readl(clk->enable_reg);
+	if (index >= ARRAY_SIZE(mux_parents))
+		return -EINVAL;
 
-	/*
-	 * The Key Matrix and ADC clocks are configured using the same
-	 * System Controller register.  The clock used will be either
-	 * 1/4 or 1/16 the external clock rate depending on the
-	 * EP93XX_SYSCON_KEYTCHCLKDIV_KDIV/EP93XX_SYSCON_KEYTCHCLKDIV_ADIV
-	 * bit being set or cleared.
-	 */
-	div_bit = clk->enable_mask >> 15;
+	if (psc->lock)
+		spin_lock_irqsave(psc->lock, flags);
 
-	if (rate == EP93XX_KEYTCHCLK_DIV4)
-		val |= div_bit;
-	else if (rate == EP93XX_KEYTCHCLK_DIV16)
-		val &= ~div_bit;
-	else
-		return -EINVAL;
+	val = __raw_readl(psc->reg);
+	val &= ~(EP93XX_SYSCON_CLKDIV_ESEL | EP93XX_SYSCON_CLKDIV_PSEL);
+
+
+	if (index != 0) {
+		val |= EP93XX_SYSCON_CLKDIV_ESEL;
+		val |= (index - 1) ? EP93XX_SYSCON_CLKDIV_PSEL : 0;
+	}
+
+	ep93xx_syscon_swlocked_write(val, psc->reg);
+
+	if (psc->lock)
+		spin_unlock_irqrestore(psc->lock, flags);
 
-	ep93xx_syscon_swlocked_write(val, clk->enable_reg);
-	clk->rate = rate;
 	return 0;
 }
 
-static int calc_clk_div(struct clk *clk, unsigned long rate,
-			int *psel, int *esel, int *pdiv, int *div)
+static bool is_best(unsigned long rate, unsigned long now,
+		     unsigned long best)
 {
-	struct clk *mclk;
-	unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1;
-	int i, found = 0, __div = 0, __pdiv = 0;
+	return abs(rate - now) < abs(rate - best);
+}
 
-	/* Don't exceed the maximum rate */
-	max_rate = max3(clk_pll1.rate / 4, clk_pll2.rate / 4, clk_xtali.rate / 4);
-	rate = min(rate, max_rate);
+static int ep93xx_mux_determine_rate(struct clk_hw *hw,
+				struct clk_rate_request *req)
+{
+	unsigned long rate = req->rate;
+	struct clk *best_parent = NULL;
+	unsigned long __parent_rate;
+	unsigned long best_rate = 0, actual_rate, mclk_rate;
+	unsigned long best_parent_rate;
+	int __div = 0, __pdiv = 0;
+	int i;
 
 	/*
 	 * Try the two pll's and the external clock
@@ -376,14 +225,11 @@ static int calc_clk_div(struct clk *clk, unsigned long rate,
 	 * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf
 	 *
 	 */
-	for (i = 0; i < 3; i++) {
-		if (i == 0)
-			mclk = &clk_xtali;
-		else if (i == 1)
-			mclk = &clk_pll1;
-		else
-			mclk = &clk_pll2;
-		mclk_rate = mclk->rate * 2;
+	for (i = 0; i < ARRAY_SIZE(mux_parents); i++) {
+		struct clk *parent = clk_get_sys(mux_parents[i], NULL);
+
+		__parent_rate = clk_get_rate(parent);
+		mclk_rate = __parent_rate * 2;
 
 		/* Try each predivider value */
 		for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
@@ -392,197 +238,496 @@ static int calc_clk_div(struct clk *clk, unsigned long rate,
 				continue;
 
 			actual_rate = mclk_rate / (__pdiv * __div);
-
-			if (!found || abs(actual_rate - rate) < rate_err) {
-				*pdiv = __pdiv - 3;
-				*div = __div;
-				*psel = (i == 2);
-				*esel = (i != 0);
-				clk->parent = mclk;
-				clk->rate = actual_rate;
-				rate_err = abs(actual_rate - rate);
-				found = 1;
+			if (is_best(rate, actual_rate, best_rate)) {
+				best_rate = actual_rate;
+				best_parent_rate = __parent_rate;
+				best_parent = parent;
 			}
 		}
 	}
 
-	if (!found)
+	if (!best_parent)
 		return -EINVAL;
 
+	req->best_parent_rate = best_parent_rate;
+	req->best_parent_hw = __clk_get_hw(best_parent);
+	req->rate = best_rate;
+
 	return 0;
 }
 
-static int set_div_rate(struct clk *clk, unsigned long rate)
+static unsigned long ep93xx_ddiv_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
 {
-	int err, psel = 0, esel = 0, pdiv = 0, div = 0;
-	u32 val;
+	struct clk_psc *psc = to_clk_psc(hw);
+	unsigned long rate = 0;
+	u32 val = __raw_readl(psc->reg);
+	int __pdiv = ((val >> EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) & 0x03);
+	int __div = val & 0x7f;
 
-	err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div);
-	if (err)
-		return err;
+	if (__div > 0)
+		rate = (parent_rate * 2) / ((__pdiv + 3) * __div);
 
-	/* Clear the esel, psel, pdiv and div bits */
-	val = __raw_readl(clk->enable_reg);
-	val &= ~0x7fff;
-
-	/* Set the new esel, psel, pdiv and div bits for the new clock rate */
-	val |= (esel ? EP93XX_SYSCON_CLKDIV_ESEL : 0) |
-		(psel ? EP93XX_SYSCON_CLKDIV_PSEL : 0) |
-		(pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div;
-	ep93xx_syscon_swlocked_write(val, clk->enable_reg);
-	return 0;
+	return rate;
 }
 
-static int set_i2s_sclk_rate(struct clk *clk, unsigned long rate)
+static int ep93xx_ddiv_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
 {
-	unsigned val = __raw_readl(clk->enable_reg);
-
-	if (rate == clk_i2s_mclk.rate / 2)
-		ep93xx_syscon_swlocked_write(val & ~EP93XX_I2SCLKDIV_SDIV, 
-					     clk->enable_reg);
-	else if (rate == clk_i2s_mclk.rate / 4)
-		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_SDIV, 
-					     clk->enable_reg);
-	else
+	struct clk_psc *psc = to_clk_psc(hw);
+	int pdiv = 0, div = 0;
+	unsigned long best_rate = 0, actual_rate, mclk_rate;
+	int __div = 0, __pdiv = 0;
+	u32 val;
+
+	mclk_rate = parent_rate * 2;
+
+	for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
+		__div = mclk_rate / (rate * __pdiv);
+		if (__div < 2 || __div > 127)
+			continue;
+
+		actual_rate = mclk_rate / (__pdiv * __div);
+		if (is_best(rate, actual_rate, best_rate)) {
+			pdiv = __pdiv - 3;
+			div = __div;
+			best_rate = actual_rate;
+		}
+	}
+
+	if (!best_rate)
 		return -EINVAL;
 
-	clk_i2s_sclk.rate = rate;
+	val = __raw_readl(psc->reg);
+
+	/* Clear old dividers */
+	val &= ~0x37f;
+
+	/* Set the new pdiv and div bits for the new clock rate */
+	val |= (pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div;
+	ep93xx_syscon_swlocked_write(val, psc->reg);
+
 	return 0;
 }
 
-static int set_i2s_lrclk_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned val = __raw_readl(clk->enable_reg) & 
-		~EP93XX_I2SCLKDIV_LRDIV_MASK;
-	
-	if (rate == clk_i2s_sclk.rate / 32)
-		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV32,
-					     clk->enable_reg);
-	else if (rate == clk_i2s_sclk.rate / 64)
-		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV64,
-					     clk->enable_reg);
-	else if (rate == clk_i2s_sclk.rate / 128)
-		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV128,
-					     clk->enable_reg);
-	else
-		return -EINVAL;
+static const struct clk_ops clk_ddiv_ops = {
+	.enable = ep93xx_clk_enable,
+	.disable = ep93xx_clk_disable,
+	.is_enabled = ep93xx_clk_is_enabled,
+	.get_parent = ep93xx_mux_get_parent,
+	.set_parent = ep93xx_mux_set_parent_lock,
+	.determine_rate = ep93xx_mux_determine_rate,
+	.recalc_rate = ep93xx_ddiv_recalc_rate,
+	.set_rate = ep93xx_ddiv_set_rate,
+};
 
-	clk_i2s_lrclk.rate = rate;
-	return 0;
+static struct clk_hw *clk_hw_register_ddiv(const char *name,
+					  void __iomem *reg,
+					  u8 bit_idx)
+{
+	struct clk_init_data init;
+	struct clk_psc *psc;
+	struct clk *clk;
+
+	psc = kzalloc(sizeof(*psc), GFP_KERNEL);
+	if (!psc)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_ddiv_ops;
+	init.flags = 0;
+	init.parent_names = mux_parents;
+	init.num_parents = ARRAY_SIZE(mux_parents);
+
+	psc->reg = reg;
+	psc->bit_idx = bit_idx;
+	psc->lock = &clk_lock;
+	psc->hw.init = &init;
+
+	clk = clk_register(NULL, &psc->hw);
+	if (IS_ERR(clk)) {
+		kfree(psc);
+		return ERR_CAST(clk);
+	}
+	return &psc->hw;
 }
 
-int clk_set_rate(struct clk *clk, unsigned long rate)
+static unsigned long ep93xx_div_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
 {
-	if (clk->set_rate)
-		return clk->set_rate(clk, rate);
+	struct clk_psc *psc = to_clk_psc(hw);
+	u32 val = __raw_readl(psc->reg);
+	u8 index = (val & psc->mask) >> psc->shift;
 
-	return -EINVAL;
+	if (index > psc->num_div)
+		return 0;
+
+	return DIV_ROUND_UP_ULL(parent_rate, psc->div[index]);
 }
-EXPORT_SYMBOL(clk_set_rate);
 
-long clk_round_rate(struct clk *clk, unsigned long rate)
+static long ep93xx_div_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *parent_rate)
 {
-	WARN_ON(clk);
-	return 0;
+	struct clk_psc *psc = to_clk_psc(hw);
+	unsigned long best = 0, now, maxdiv;
+	int i;
+
+	maxdiv = psc->div[psc->num_div - 1];
+
+	for (i = 0; i < psc->num_div; i++) {
+		if ((rate * psc->div[i]) == *parent_rate)
+			return DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]);
+
+		now = DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]);
+
+		if (is_best(rate, now, best))
+			best = now;
+	}
+
+	if (!best)
+		best = DIV_ROUND_UP_ULL(*parent_rate, maxdiv);
+
+	return best;
 }
-EXPORT_SYMBOL(clk_round_rate);
 
-int clk_set_parent(struct clk *clk, struct clk *parent)
+static int ep93xx_div_set_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long parent_rate)
 {
-	WARN_ON(clk);
+	struct clk_psc *psc = to_clk_psc(hw);
+	u32 val = __raw_readl(psc->reg) & ~psc->mask;
+	int i;
+
+	for (i = 0; i < psc->num_div; i++)
+		if (rate == parent_rate / psc->div[i]) {
+			val |= i << psc->shift;
+			break;
+		}
+
+	if (i == psc->num_div)
+		return -EINVAL;
+
+	ep93xx_syscon_swlocked_write(val, psc->reg);
+
 	return 0;
 }
-EXPORT_SYMBOL(clk_set_parent);
 
-struct clk *clk_get_parent(struct clk *clk)
+static const struct clk_ops ep93xx_div_ops = {
+	.enable = ep93xx_clk_enable,
+	.disable = ep93xx_clk_disable,
+	.is_enabled = ep93xx_clk_is_enabled,
+	.recalc_rate = ep93xx_div_recalc_rate,
+	.round_rate = ep93xx_div_round_rate,
+	.set_rate = ep93xx_div_set_rate,
+};
+
+static struct clk_hw *clk_hw_register_div(const char *name,
+					  const char *parent_name,
+					  void __iomem *reg,
+					  u8 enable_bit,
+					  u8 shift,
+					  u8 width,
+					  char *clk_divisors,
+					  u8 num_div)
 {
-	return clk->parent;
+	struct clk_init_data init;
+	struct clk_psc *psc;
+	struct clk *clk;
+
+	psc = kzalloc(sizeof(*psc), GFP_KERNEL);
+	if (!psc)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &ep93xx_div_ops;
+	init.flags = 0;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = 1;
+
+	psc->reg = reg;
+	psc->bit_idx = enable_bit;
+	psc->mask = GENMASK(shift + width - 1, shift);
+	psc->shift = shift;
+	psc->div = clk_divisors;
+	psc->num_div = num_div;
+	psc->lock = &clk_lock;
+	psc->hw.init = &init;
+
+	clk = clk_register(NULL, &psc->hw);
+	if (IS_ERR(clk)) {
+		kfree(psc);
+		return ERR_CAST(clk);
+	}
+	return &psc->hw;
 }
-EXPORT_SYMBOL(clk_get_parent);
 
+struct ep93xx_gate {
+	unsigned int bit;
+	const char *dev_id;
+	const char *con_id;
+};
 
-static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
-static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
-static char pclk_divisors[] = { 1, 2, 4, 8 };
+static struct ep93xx_gate ep93xx_uarts[] = {
+	{EP93XX_SYSCON_DEVCFG_U1EN, "apb:uart1", NULL},
+	{EP93XX_SYSCON_DEVCFG_U2EN, "apb:uart2", NULL},
+	{EP93XX_SYSCON_DEVCFG_U3EN, "apb:uart3", NULL},
+};
 
-/*
- * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS
- */
-static unsigned long calc_pll_rate(u32 config_word)
+static void __init ep93xx_uart_clock_init(void)
 {
-	unsigned long long rate;
-	int i;
+	unsigned int i;
+	struct clk_hw *hw;
+	u32 value;
+	unsigned int clk_uart_div;
 
-	rate = clk_xtali.rate;
-	rate *= ((config_word >> 11) & 0x1f) + 1;		/* X1FBD */
-	rate *= ((config_word >> 5) & 0x3f) + 1;		/* X2FBD */
-	do_div(rate, (config_word & 0x1f) + 1);			/* X2IPD */
-	for (i = 0; i < ((config_word >> 16) & 3); i++)		/* PS */
-		rate >>= 1;
+	value = __raw_readl(EP93XX_SYSCON_PWRCNT);
+	if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
+		clk_uart_div = 1;
+	else
+		clk_uart_div = 2;
 
-	return (unsigned long)rate;
+	hw = clk_hw_register_fixed_factor(NULL, "uart", "xtali", 0, 1, clk_uart_div);
+
+	/* parenting uart gate clocks to uart clock */
+	for (i = 0; i < ARRAY_SIZE(ep93xx_uarts); i++) {
+		hw = ep93xx_clk_register_gate(ep93xx_uarts[i].dev_id,
+					"uart",
+					EP93XX_SYSCON_DEVCFG,
+					ep93xx_uarts[i].bit);
+
+		clk_hw_register_clkdev(hw, NULL, ep93xx_uarts[i].dev_id);
+	}
 }
 
+static struct ep93xx_gate ep93xx_dmas[] = {
+	{EP93XX_SYSCON_PWRCNT_DMA_M2P0, NULL, "m2p0"},
+	{EP93XX_SYSCON_PWRCNT_DMA_M2P1, NULL, "m2p1"},
+	{EP93XX_SYSCON_PWRCNT_DMA_M2P2, NULL, "m2p2"},
+	{EP93XX_SYSCON_PWRCNT_DMA_M2P3, NULL, "m2p3"},
+	{EP93XX_SYSCON_PWRCNT_DMA_M2P4, NULL, "m2p4"},
+	{EP93XX_SYSCON_PWRCNT_DMA_M2P5, NULL, "m2p5"},
+	{EP93XX_SYSCON_PWRCNT_DMA_M2P6, NULL, "m2p6"},
+	{EP93XX_SYSCON_PWRCNT_DMA_M2P7, NULL, "m2p7"},
+	{EP93XX_SYSCON_PWRCNT_DMA_M2P8, NULL, "m2p8"},
+	{EP93XX_SYSCON_PWRCNT_DMA_M2P9, NULL, "m2p9"},
+	{EP93XX_SYSCON_PWRCNT_DMA_M2M0, NULL, "m2m0"},
+	{EP93XX_SYSCON_PWRCNT_DMA_M2M1, NULL, "m2m1"},
+};
+
 static void __init ep93xx_dma_clock_init(void)
 {
-	clk_m2p0.rate = clk_h.rate;
-	clk_m2p1.rate = clk_h.rate;
-	clk_m2p2.rate = clk_h.rate;
-	clk_m2p3.rate = clk_h.rate;
-	clk_m2p4.rate = clk_h.rate;
-	clk_m2p5.rate = clk_h.rate;
-	clk_m2p6.rate = clk_h.rate;
-	clk_m2p7.rate = clk_h.rate;
-	clk_m2p8.rate = clk_h.rate;
-	clk_m2p9.rate = clk_h.rate;
-	clk_m2m0.rate = clk_h.rate;
-	clk_m2m1.rate = clk_h.rate;
+	unsigned int i;
+	struct clk_hw *hw;
+	int ret;
+
+	for (i = 0; i < ARRAY_SIZE(ep93xx_dmas); i++) {
+		hw = clk_hw_register_gate(NULL, ep93xx_dmas[i].con_id,
+					"hclk", 0,
+					EP93XX_SYSCON_PWRCNT,
+					ep93xx_dmas[i].bit,
+					0,
+					&clk_lock);
+
+		ret = clk_hw_register_clkdev(hw, ep93xx_dmas[i].con_id, NULL);
+		if (ret)
+			pr_err("%s: failed to register lookup %s\n",
+			       __func__, ep93xx_dmas[i].con_id);
+	}
 }
 
 static int __init ep93xx_clock_init(void)
 {
 	u32 value;
+	struct clk_hw *hw;
+	unsigned long clk_pll1_rate;
+	unsigned long clk_f_rate;
+	unsigned long clk_h_rate;
+	unsigned long clk_p_rate;
+	unsigned long clk_pll2_rate;
+	unsigned int clk_f_div;
+	unsigned int clk_h_div;
+	unsigned int clk_p_div;
+	unsigned int clk_usb_div;
+	unsigned long clk_spi_div;
+
+	hw = clk_hw_register_fixed_rate(NULL, "xtali", NULL, 0, EP93XX_EXT_CLK_RATE);
+	clk_hw_register_clkdev(hw, NULL, "xtali");
 
 	/* Determine the bootloader configured pll1 rate */
 	value = __raw_readl(EP93XX_SYSCON_CLKSET1);
 	if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1))
-		clk_pll1.rate = clk_xtali.rate;
+		clk_pll1_rate = EP93XX_EXT_CLK_RATE;
 	else
-		clk_pll1.rate = calc_pll_rate(value);
+		clk_pll1_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value);
+
+	hw = clk_hw_register_fixed_rate(NULL, "pll1", "xtali", 0, clk_pll1_rate);
+	clk_hw_register_clkdev(hw, NULL, "pll1");
 
 	/* Initialize the pll1 derived clocks */
-	clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7];
-	clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7];
-	clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3];
+	clk_f_div = fclk_divisors[(value >> 25) & 0x7];
+	clk_h_div = hclk_divisors[(value >> 20) & 0x7];
+	clk_p_div = pclk_divisors[(value >> 18) & 0x3];
+
+	hw = clk_hw_register_fixed_factor(NULL, "fclk", "pll1", 0, 1, clk_f_div);
+	clk_f_rate = clk_get_rate(hw->clk);
+	hw = clk_hw_register_fixed_factor(NULL, "hclk", "pll1", 0, 1, clk_h_div);
+	clk_h_rate = clk_get_rate(hw->clk);
+	hw = clk_hw_register_fixed_factor(NULL, "pclk", "hclk", 0, 1, clk_p_div);
+	clk_p_rate = clk_get_rate(hw->clk);
+
+	clk_hw_register_clkdev(hw, "apb_pclk", NULL);
+
 	ep93xx_dma_clock_init();
 
 	/* Determine the bootloader configured pll2 rate */
 	value = __raw_readl(EP93XX_SYSCON_CLKSET2);
 	if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2))
-		clk_pll2.rate = clk_xtali.rate;
+		clk_pll2_rate = EP93XX_EXT_CLK_RATE;
 	else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN)
-		clk_pll2.rate = calc_pll_rate(value);
+		clk_pll2_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value);
 	else
-		clk_pll2.rate = 0;
+		clk_pll2_rate = 0;
+
+	hw = clk_hw_register_fixed_rate(NULL, "pll2", "xtali", 0, clk_pll2_rate);
+	clk_hw_register_clkdev(hw, NULL, "pll2");
 
 	/* Initialize the pll2 derived clocks */
-	clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
+	/*
+	 * These four bits set the divide ratio between the PLL2
+	 * output and the USB clock.
+	 * 0000 - Divide by 1
+	 * 0001 - Divide by 2
+	 * 0010 - Divide by 3
+	 * 0011 - Divide by 4
+	 * 0100 - Divide by 5
+	 * 0101 - Divide by 6
+	 * 0110 - Divide by 7
+	 * 0111 - Divide by 8
+	 * 1000 - Divide by 9
+	 * 1001 - Divide by 10
+	 * 1010 - Divide by 11
+	 * 1011 - Divide by 12
+	 * 1100 - Divide by 13
+	 * 1101 - Divide by 14
+	 * 1110 - Divide by 15
+	 * 1111 - Divide by 1
+	 * On power-on-reset these bits are reset to 0000b.
+	 */
+	clk_usb_div = (((value >> 28) & 0xf) + 1);
+	hw = clk_hw_register_fixed_factor(NULL, "usb_clk", "pll2", 0, 1, clk_usb_div);
+	hw = clk_hw_register_gate(NULL, "ohci-platform",
+				"usb_clk", 0,
+				EP93XX_SYSCON_PWRCNT,
+				EP93XX_SYSCON_PWRCNT_USH_EN,
+				0,
+				&clk_lock);
+	clk_hw_register_clkdev(hw, NULL, "ohci-platform");
 
 	/*
 	 * EP93xx SSP clock rate was doubled in version E2. For more information
 	 * see:
 	 *     http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
 	 */
+	clk_spi_div = 1;
 	if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2)
-		clk_spi.rate /= 2;
+		clk_spi_div = 2;
+	hw = clk_hw_register_fixed_factor(NULL, "ep93xx-spi.0", "xtali", 0, 1, clk_spi_div);
+	clk_hw_register_clkdev(hw, NULL, "ep93xx-spi.0");
+
+	/* pwm clock */
+	hw = clk_hw_register_fixed_factor(NULL, "pwm_clk", "xtali", 0, 1, 1);
+	clk_hw_register_clkdev(hw, "pwm_clk", NULL);
 
 	pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
-		clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);
+		clk_pll1_rate / 1000000, clk_pll2_rate / 1000000);
 	pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
-		clk_f.rate / 1000000, clk_h.rate / 1000000,
-		clk_p.rate / 1000000);
+		clk_f_rate / 1000000, clk_h_rate / 1000000,
+		clk_p_rate / 1000000);
+
+	ep93xx_uart_clock_init();
+
+	/* touchscreen/adc clock */
+	hw = clk_hw_register_div("ep93xx-adc",
+				"xtali",
+				EP93XX_SYSCON_KEYTCHCLKDIV,
+				EP93XX_SYSCON_KEYTCHCLKDIV_TSEN,
+				EP93XX_SYSCON_KEYTCHCLKDIV_ADIV,
+				1,
+				adc_divisors,
+				ARRAY_SIZE(adc_divisors));
+
+	clk_hw_register_clkdev(hw, NULL, "ep93xx-adc");
+
+	/* keypad clock */
+	hw = clk_hw_register_div("ep93xx-keypad",
+				"xtali",
+				EP93XX_SYSCON_KEYTCHCLKDIV,
+				EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
+				EP93XX_SYSCON_KEYTCHCLKDIV_KDIV,
+				1,
+				adc_divisors,
+				ARRAY_SIZE(adc_divisors));
+
+	clk_hw_register_clkdev(hw, NULL, "ep93xx-keypad");
+
+	/* On reset PDIV and VDIV is set to zero, while PDIV zero
+	 * means clock disable, VDIV shouldn't be zero.
+	 * So i set both dividers to minimum.
+	 */
+	/* ENA - Enable CLK divider. */
+	/* PDIV - 00 - Disable clock */
+	/* VDIV - at least 2 */
+	/* Check and enable video clk registers */
+	value = __raw_readl(EP93XX_SYSCON_VIDCLKDIV);
+	value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2;
+	ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_VIDCLKDIV);
+
+	/* check and enable i2s clk registers */
+	value = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
+	value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2;
+	ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_I2SCLKDIV);
+
+	/* video clk */
+	hw = clk_hw_register_ddiv("ep93xx-fb",
+				EP93XX_SYSCON_VIDCLKDIV,
+				EP93XX_SYSCON_CLKDIV_ENABLE);
+
+	clk_hw_register_clkdev(hw, NULL, "ep93xx-fb");
+
+	/* i2s clk */
+	hw = clk_hw_register_ddiv("mclk",
+				EP93XX_SYSCON_I2SCLKDIV,
+				EP93XX_SYSCON_CLKDIV_ENABLE);
+
+	clk_hw_register_clkdev(hw, "mclk", "ep93xx-i2s");
+
+	/* i2s sclk */
+#define EP93XX_I2SCLKDIV_SDIV_SHIFT	16
+#define EP93XX_I2SCLKDIV_SDIV_WIDTH	1
+	hw = clk_hw_register_div("sclk",
+				"mclk",
+				EP93XX_SYSCON_I2SCLKDIV,
+				EP93XX_SYSCON_I2SCLKDIV_SENA,
+				EP93XX_I2SCLKDIV_SDIV_SHIFT,
+				EP93XX_I2SCLKDIV_SDIV_WIDTH,
+				sclk_divisors,
+				ARRAY_SIZE(sclk_divisors));
+
+	clk_hw_register_clkdev(hw, "sclk", "ep93xx-i2s");
+
+	/* i2s lrclk */
+#define EP93XX_I2SCLKDIV_LRDIV32_SHIFT	17
+#define EP93XX_I2SCLKDIV_LRDIV32_WIDTH	3
+	hw = clk_hw_register_div("lrclk",
+				"sclk",
+				EP93XX_SYSCON_I2SCLKDIV,
+				EP93XX_SYSCON_I2SCLKDIV_SENA,
+				EP93XX_I2SCLKDIV_LRDIV32_SHIFT,
+				EP93XX_I2SCLKDIV_LRDIV32_WIDTH,
+				lrclk_divisors,
+				ARRAY_SIZE(lrclk_divisors));
+
+	clk_hw_register_clkdev(hw, "lrclk", "ep93xx-i2s");
 
-	clkdev_add_table(clocks, ARRAY_SIZE(clocks));
 	return 0;
 }
 postcore_initcall(ep93xx_clock_init);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 6fb19a393fd2..71b113976420 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/uaccess.h>
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
@@ -47,6 +48,7 @@
 #include <asm/mach/map.h>
 
 #include "soc.h"
+#include "irqs.h"
 
 /*************************************************************************
  * Static I/O mappings that are needed for all EP93xx platforms
@@ -75,8 +77,8 @@ void __init ep93xx_map_io(void)
  *************************************************************************/
 void __init ep93xx_init_irq(void)
 {
-	vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
-	vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
+	vic_init(EP93XX_VIC1_BASE, IRQ_EP93XX_VIC0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+	vic_init(EP93XX_VIC2_BASE, IRQ_EP93XX_VIC1, EP93XX_VIC2_VALID_IRQ_MASK, 0);
 }
 
 
@@ -214,7 +216,7 @@ static int ep93xx_ohci_power_on(struct platform_device *pdev)
 			return PTR_ERR(ep93xx_ohci_host_clock);
 	}
 
-	return clk_enable(ep93xx_ohci_host_clock);
+	return clk_prepare_enable(ep93xx_ohci_host_clock);
 }
 
 static void ep93xx_ohci_power_off(struct platform_device *pdev)
@@ -424,10 +426,8 @@ void __init ep93xx_register_spi(struct ep93xx_spi_info *info,
 static const struct gpio_led ep93xx_led_pins[] __initconst = {
 	{
 		.name	= "platform:grled",
-		.gpio	= EP93XX_GPIO_LINE_GRLED,
 	}, {
 		.name	= "platform:rdled",
-		.gpio	= EP93XX_GPIO_LINE_RDLED,
 	},
 };
 
@@ -436,6 +436,16 @@ static const struct gpio_led_platform_data ep93xx_led_data __initconst = {
 	.leds		= ep93xx_led_pins,
 };
 
+static struct gpiod_lookup_table ep93xx_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		/* Use local offsets on gpiochip/port "E" */
+		GPIO_LOOKUP_IDX("E", 0, NULL, 0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("E", 1,	NULL, 1, GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 /*************************************************************************
  * EP93xx pwm peripheral handling
  *************************************************************************/
@@ -988,6 +998,7 @@ struct device __init *ep93xx_init_devices(void)
 	platform_device_register(&ep93xx_ohci_device);
 	platform_device_register(&ep93xx_wdt_device);
 
+	gpiod_add_lookup_table(&ep93xx_leds_gpio_table);
 	gpio_led_register_device(-1, &ep93xx_led_data);
 
 	return parent;
@@ -1004,8 +1015,3 @@ void ep93xx_restart(enum reboot_mode mode, const char *cmd)
 	while (1)
 		;
 }
-
-void __init ep93xx_init_late(void)
-{
-	crunch_init();
-}
diff --git a/arch/arm/mach-ep93xx/crunch-bits.S b/arch/arm/mach-ep93xx/crunch-bits.S
deleted file mode 100644
index fb2dbf76f09e..000000000000
--- a/arch/arm/mach-ep93xx/crunch-bits.S
+++ /dev/null
@@ -1,310 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/kernel/crunch-bits.S
- * Cirrus MaverickCrunch context switching and handling
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * Shamelessly stolen from the iWMMXt code by Nicolas Pitre, which is
- * Copyright (c) 2003-2004, MontaVista Software, Inc.
- */
-
-#include <linux/linkage.h>
-#include <asm/ptrace.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-#include <asm/assembler.h>
-#include <mach/ep93xx-regs.h>
-
-/*
- * We can't use hex constants here due to a bug in gas.
- */
-#define CRUNCH_MVDX0		0
-#define CRUNCH_MVDX1		8
-#define CRUNCH_MVDX2		16
-#define CRUNCH_MVDX3		24
-#define CRUNCH_MVDX4		32
-#define CRUNCH_MVDX5		40
-#define CRUNCH_MVDX6		48
-#define CRUNCH_MVDX7		56
-#define CRUNCH_MVDX8		64
-#define CRUNCH_MVDX9		72
-#define CRUNCH_MVDX10		80
-#define CRUNCH_MVDX11		88
-#define CRUNCH_MVDX12		96
-#define CRUNCH_MVDX13		104
-#define CRUNCH_MVDX14		112
-#define CRUNCH_MVDX15		120
-#define CRUNCH_MVAX0L		128
-#define CRUNCH_MVAX0M		132
-#define CRUNCH_MVAX0H		136
-#define CRUNCH_MVAX1L		140
-#define CRUNCH_MVAX1M		144
-#define CRUNCH_MVAX1H		148
-#define CRUNCH_MVAX2L		152
-#define CRUNCH_MVAX2M		156
-#define CRUNCH_MVAX2H		160
-#define CRUNCH_MVAX3L		164
-#define CRUNCH_MVAX3M		168
-#define CRUNCH_MVAX3H		172
-#define CRUNCH_DSPSC		176
-
-#define CRUNCH_SIZE		184
-
-	.text
-
-/*
- * Lazy switching of crunch coprocessor context
- *
- * r10 = struct thread_info pointer
- * r9  = ret_from_exception
- * lr  = undefined instr exit
- *
- * called from prefetch exception handler with interrupts enabled
- */
-ENTRY(crunch_task_enable)
-	inc_preempt_count r10, r3
-
-	ldr	r8, =(EP93XX_APB_VIRT_BASE + 0x00130000)	@ syscon addr
-
-	ldr	r1, [r8, #0x80]
-	tst	r1, #0x00800000			@ access to crunch enabled?
-	bne	2f				@ if so no business here
-	mov	r3, #0xaa			@ unlock syscon swlock
-	str	r3, [r8, #0xc0]
-	orr	r1, r1, #0x00800000		@ enable access to crunch
-	str	r1, [r8, #0x80]
-
-	ldr	r3, =crunch_owner
-	add	r0, r10, #TI_CRUNCH_STATE	@ get task crunch save area
-	ldr	r2, [sp, #60]			@ current task pc value
-	ldr	r1, [r3]			@ get current crunch owner
-	str	r0, [r3]			@ this task now owns crunch
-	sub	r2, r2, #4			@ adjust pc back
-	str	r2, [sp, #60]
-
-	ldr	r2, [r8, #0x80]
-	mov	r2, r2				@ flush out enable (@@@)
-
-	teq	r1, #0				@ test for last ownership
-	mov	lr, r9				@ normal exit from exception
-	beq	crunch_load			@ no owner, skip save
-
-crunch_save:
-	cfstr64		mvdx0, [r1, #CRUNCH_MVDX0]	@ save 64b registers
-	cfstr64		mvdx1, [r1, #CRUNCH_MVDX1]
-	cfstr64		mvdx2, [r1, #CRUNCH_MVDX2]
-	cfstr64		mvdx3, [r1, #CRUNCH_MVDX3]
-	cfstr64		mvdx4, [r1, #CRUNCH_MVDX4]
-	cfstr64		mvdx5, [r1, #CRUNCH_MVDX5]
-	cfstr64		mvdx6, [r1, #CRUNCH_MVDX6]
-	cfstr64		mvdx7, [r1, #CRUNCH_MVDX7]
-	cfstr64		mvdx8, [r1, #CRUNCH_MVDX8]
-	cfstr64		mvdx9, [r1, #CRUNCH_MVDX9]
-	cfstr64		mvdx10, [r1, #CRUNCH_MVDX10]
-	cfstr64		mvdx11, [r1, #CRUNCH_MVDX11]
-	cfstr64		mvdx12, [r1, #CRUNCH_MVDX12]
-	cfstr64		mvdx13, [r1, #CRUNCH_MVDX13]
-	cfstr64		mvdx14, [r1, #CRUNCH_MVDX14]
-	cfstr64		mvdx15, [r1, #CRUNCH_MVDX15]
-
-#ifdef __ARMEB__
-#error fix me for ARMEB
-#endif
-
-	cfmv32al	mvfx0, mvax0			@ save 72b accumulators
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX0L]
-	cfmv32am	mvfx0, mvax0
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX0M]
-	cfmv32ah	mvfx0, mvax0
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX0H]
-	cfmv32al	mvfx0, mvax1
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX1L]
-	cfmv32am	mvfx0, mvax1
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX1M]
-	cfmv32ah	mvfx0, mvax1
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX1H]
-	cfmv32al	mvfx0, mvax2
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX2L]
-	cfmv32am	mvfx0, mvax2
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX2M]
-	cfmv32ah	mvfx0, mvax2
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX2H]
-	cfmv32al	mvfx0, mvax3
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX3L]
-	cfmv32am	mvfx0, mvax3
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX3M]
-	cfmv32ah	mvfx0, mvax3
-	cfstr32		mvfx0, [r1, #CRUNCH_MVAX3H]
-
-	cfmv32sc	mvdx0, dspsc			@ save status word
-	cfstr64		mvdx0, [r1, #CRUNCH_DSPSC]
-
-	teq		r0, #0				@ anything to load?
-	cfldr64eq	mvdx0, [r1, #CRUNCH_MVDX0]	@ mvdx0 was clobbered
-	beq		1f
-
-crunch_load:
-	cfldr64		mvdx0, [r0, #CRUNCH_DSPSC]	@ load status word
-	cfmvsc32	dspsc, mvdx0
-
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX0L]	@ load 72b accumulators
-	cfmval32	mvax0, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX0M]
-	cfmvam32	mvax0, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX0H]
-	cfmvah32	mvax0, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX1L]
-	cfmval32	mvax1, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX1M]
-	cfmvam32	mvax1, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX1H]
-	cfmvah32	mvax1, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX2L]
-	cfmval32	mvax2, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX2M]
-	cfmvam32	mvax2, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX2H]
-	cfmvah32	mvax2, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX3L]
-	cfmval32	mvax3, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX3M]
-	cfmvam32	mvax3, mvfx0
-	cfldr32		mvfx0, [r0, #CRUNCH_MVAX3H]
-	cfmvah32	mvax3, mvfx0
-
-	cfldr64		mvdx0, [r0, #CRUNCH_MVDX0]	@ load 64b registers
-	cfldr64		mvdx1, [r0, #CRUNCH_MVDX1]
-	cfldr64		mvdx2, [r0, #CRUNCH_MVDX2]
-	cfldr64		mvdx3, [r0, #CRUNCH_MVDX3]
-	cfldr64		mvdx4, [r0, #CRUNCH_MVDX4]
-	cfldr64		mvdx5, [r0, #CRUNCH_MVDX5]
-	cfldr64		mvdx6, [r0, #CRUNCH_MVDX6]
-	cfldr64		mvdx7, [r0, #CRUNCH_MVDX7]
-	cfldr64		mvdx8, [r0, #CRUNCH_MVDX8]
-	cfldr64		mvdx9, [r0, #CRUNCH_MVDX9]
-	cfldr64		mvdx10, [r0, #CRUNCH_MVDX10]
-	cfldr64		mvdx11, [r0, #CRUNCH_MVDX11]
-	cfldr64		mvdx12, [r0, #CRUNCH_MVDX12]
-	cfldr64		mvdx13, [r0, #CRUNCH_MVDX13]
-	cfldr64		mvdx14, [r0, #CRUNCH_MVDX14]
-	cfldr64		mvdx15, [r0, #CRUNCH_MVDX15]
-
-1:
-#ifdef CONFIG_PREEMPT_COUNT
-	get_thread_info r10
-#endif
-2:	dec_preempt_count r10, r3
-	ret	lr
-
-/*
- * Back up crunch regs to save area and disable access to them
- * (mainly for gdb or sleep mode usage)
- *
- * r0 = struct thread_info pointer of target task or NULL for any
- */
-ENTRY(crunch_task_disable)
-	stmfd	sp!, {r4, r5, lr}
-
-	mrs	ip, cpsr
-	orr	r2, ip, #PSR_I_BIT		@ disable interrupts
-	msr	cpsr_c, r2
-
-	ldr	r4, =(EP93XX_APB_VIRT_BASE + 0x00130000)	@ syscon addr
-
-	ldr	r3, =crunch_owner
-	add	r2, r0, #TI_CRUNCH_STATE	@ get task crunch save area
-	ldr	r1, [r3]			@ get current crunch owner
-	teq	r1, #0				@ any current owner?
-	beq	1f				@ no: quit
-	teq	r0, #0				@ any owner?
-	teqne	r1, r2				@ or specified one?
-	bne	1f				@ no: quit
-
-	ldr	r5, [r4, #0x80]			@ enable access to crunch
-	mov	r2, #0xaa
-	str	r2, [r4, #0xc0]
-	orr	r5, r5, #0x00800000
-	str	r5, [r4, #0x80]
-
-	mov	r0, #0				@ nothing to load
-	str	r0, [r3]			@ no more current owner
-	ldr	r2, [r4, #0x80]			@ flush out enable (@@@)
-	mov	r2, r2
-	bl	crunch_save
-
-	mov	r2, #0xaa			@ disable access to crunch
-	str	r2, [r4, #0xc0]
-	bic	r5, r5, #0x00800000
-	str	r5, [r4, #0x80]
-	ldr	r5, [r4, #0x80]			@ flush out enable (@@@)
-	mov	r5, r5
-
-1:	msr	cpsr_c, ip			@ restore interrupt mode
-	ldmfd	sp!, {r4, r5, pc}
-
-/*
- * Copy crunch state to given memory address
- *
- * r0 = struct thread_info pointer of target task
- * r1 = memory address where to store crunch state
- *
- * this is called mainly in the creation of signal stack frames
- */
-ENTRY(crunch_task_copy)
-	mrs	ip, cpsr
-	orr	r2, ip, #PSR_I_BIT		@ disable interrupts
-	msr	cpsr_c, r2
-
-	ldr	r3, =crunch_owner
-	add	r2, r0, #TI_CRUNCH_STATE	@ get task crunch save area
-	ldr	r3, [r3]			@ get current crunch owner
-	teq	r2, r3				@ does this task own it...
-	beq	1f
-
-	@ current crunch values are in the task save area
-	msr	cpsr_c, ip			@ restore interrupt mode
-	mov	r0, r1
-	mov	r1, r2
-	mov	r2, #CRUNCH_SIZE
-	b	memcpy
-
-1:	@ this task owns crunch regs -- grab a copy from there
-	mov	r0, #0				@ nothing to load
-	mov	r3, lr				@ preserve return address
-	bl	crunch_save
-	msr	cpsr_c, ip			@ restore interrupt mode
-	ret	r3
-
-/*
- * Restore crunch state from given memory address
- *
- * r0 = struct thread_info pointer of target task
- * r1 = memory address where to get crunch state from
- *
- * this is used to restore crunch state when unwinding a signal stack frame
- */
-ENTRY(crunch_task_restore)
-	mrs	ip, cpsr
-	orr	r2, ip, #PSR_I_BIT		@ disable interrupts
-	msr	cpsr_c, r2
-
-	ldr	r3, =crunch_owner
-	add	r2, r0, #TI_CRUNCH_STATE	@ get task crunch save area
-	ldr	r3, [r3]			@ get current crunch owner
-	teq	r2, r3				@ does this task own it...
-	beq	1f
-
-	@ this task doesn't own crunch regs -- use its save area
-	msr	cpsr_c, ip			@ restore interrupt mode
-	mov	r0, r2
-	mov	r2, #CRUNCH_SIZE
-	b	memcpy
-
-1:	@ this task owns crunch regs -- load them directly
-	mov	r0, r1
-	mov	r1, #0				@ nothing to save
-	mov	r3, lr				@ preserve return address
-	bl	crunch_load
-	msr	cpsr_c, ip			@ restore interrupt mode
-	ret	r3
diff --git a/arch/arm/mach-ep93xx/crunch.c b/arch/arm/mach-ep93xx/crunch.c
deleted file mode 100644
index 757032d82f63..000000000000
--- a/arch/arm/mach-ep93xx/crunch.c
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/kernel/crunch.c
- * Cirrus MaverickCrunch context switching and handling
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/thread_notify.h>
-
-#include "soc.h"
-
-struct crunch_state *crunch_owner;
-
-void crunch_task_release(struct thread_info *thread)
-{
-	local_irq_disable();
-	if (crunch_owner == &thread->crunchstate)
-		crunch_owner = NULL;
-	local_irq_enable();
-}
-
-static int crunch_enabled(u32 devcfg)
-{
-	return !!(devcfg & EP93XX_SYSCON_DEVCFG_CPENA);
-}
-
-static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
-{
-	struct thread_info *thread = (struct thread_info *)t;
-	struct crunch_state *crunch_state;
-	u32 devcfg;
-
-	crunch_state = &thread->crunchstate;
-
-	switch (cmd) {
-	case THREAD_NOTIFY_FLUSH:
-		memset(crunch_state, 0, sizeof(*crunch_state));
-
-		/*
-		 * FALLTHROUGH: Ensure we don't try to overwrite our newly
-		 * initialised state information on the first fault.
-		 */
-		fallthrough;
-
-	case THREAD_NOTIFY_EXIT:
-		crunch_task_release(thread);
-		break;
-
-	case THREAD_NOTIFY_SWITCH:
-		devcfg = __raw_readl(EP93XX_SYSCON_DEVCFG);
-		if (crunch_enabled(devcfg) || crunch_owner == crunch_state) {
-			/*
-			 * We don't use ep93xx_syscon_swlocked_write() here
-			 * because we are on the context switch path and
-			 * preemption is already disabled.
-			 */
-			devcfg ^= EP93XX_SYSCON_DEVCFG_CPENA;
-			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-			__raw_writel(devcfg, EP93XX_SYSCON_DEVCFG);
-		}
-		break;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block crunch_notifier_block = {
-	.notifier_call	= crunch_do,
-};
-
-int __init crunch_init(void)
-{
-	thread_register_notifier(&crunch_notifier_block);
-	elf_hwcap |= HWCAP_CRUNCH;
-
-	return 0;
-}
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 7b7280c21ee0..4b90899a66e9 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -243,11 +243,11 @@ static void __init edb93xx_init_machine(void)
 MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
-	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -256,11 +256,11 @@ MACHINE_END
 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	/* Maintainer: George Kashperko <george@chas.com.ua> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
-	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -269,11 +269,11 @@ MACHINE_END
 MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
-	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -282,11 +282,11 @@ MACHINE_END
 MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
-	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -295,11 +295,11 @@ MACHINE_END
 MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
-	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -308,11 +308,11 @@ MACHINE_END
 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
-	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -321,11 +321,11 @@ MACHINE_END
 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
-	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
@@ -334,11 +334,11 @@ MACHINE_END
 MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
 	.init_machine	= edb93xx_init_machine,
-	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/ep93xx-regs.h
index 6839ea032e58..8fa3646de0a4 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/ep93xx-regs.h
@@ -1,8 +1,4 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
- */
-
 #ifndef __ASM_ARCH_EP93XX_REGS_H
 #define __ASM_ARCH_EP93XX_REGS_H
 
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
deleted file mode 100644
index 8905db1edd5a..000000000000
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/gesbc9312.c
- * Glomation GESBC-9312-sx support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sizes.h>
-
-#include "hardware.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init gesbc9312_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_8M);
-	ep93xx_register_eth(&gesbc9312_eth_data, 0);
-}
-
-MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= gesbc9312_init_machine,
-	.init_late	= ep93xx_init_late,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/gpio-ep93xx.h b/arch/arm/mach-ep93xx/gpio-ep93xx.h
index 242af4a401ea..7b46eb7e5507 100644
--- a/arch/arm/mach-ep93xx/gpio-ep93xx.h
+++ b/arch/arm/mach-ep93xx/gpio-ep93xx.h
@@ -4,7 +4,7 @@
 #ifndef __GPIO_EP93XX_H
 #define __GPIO_EP93XX_H
 
-#include <mach/ep93xx-regs.h>
+#include "ep93xx-regs.h"
 
 #define EP93XX_GPIO_PHYS_BASE		EP93XX_APB_PHYS(0x00040000)
 #define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
diff --git a/arch/arm/mach-ep93xx/include/mach/irqs.h b/arch/arm/mach-ep93xx/include/mach/irqs.h
deleted file mode 100644
index 244daf83ce6d..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/irqs.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/irqs.h
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define IRQ_EP93XX_COMMRX		2
-#define IRQ_EP93XX_COMMTX		3
-#define IRQ_EP93XX_TIMER1		4
-#define IRQ_EP93XX_TIMER2		5
-#define IRQ_EP93XX_AACINTR		6
-#define IRQ_EP93XX_DMAM2P0		7
-#define IRQ_EP93XX_DMAM2P1		8
-#define IRQ_EP93XX_DMAM2P2		9
-#define IRQ_EP93XX_DMAM2P3		10
-#define IRQ_EP93XX_DMAM2P4		11
-#define IRQ_EP93XX_DMAM2P5		12
-#define IRQ_EP93XX_DMAM2P6		13
-#define IRQ_EP93XX_DMAM2P7		14
-#define IRQ_EP93XX_DMAM2P8		15
-#define IRQ_EP93XX_DMAM2P9		16
-#define IRQ_EP93XX_DMAM2M0		17
-#define IRQ_EP93XX_DMAM2M1		18
-#define IRQ_EP93XX_GPIO0MUX		19
-#define IRQ_EP93XX_GPIO1MUX		20
-#define IRQ_EP93XX_GPIO2MUX		21
-#define IRQ_EP93XX_GPIO3MUX		22
-#define IRQ_EP93XX_UART1RX		23
-#define IRQ_EP93XX_UART1TX		24
-#define IRQ_EP93XX_UART2RX		25
-#define IRQ_EP93XX_UART2TX		26
-#define IRQ_EP93XX_UART3RX		27
-#define IRQ_EP93XX_UART3TX		28
-#define IRQ_EP93XX_KEY			29
-#define IRQ_EP93XX_TOUCH		30
-#define EP93XX_VIC1_VALID_IRQ_MASK	0x7ffffffc
-
-#define IRQ_EP93XX_EXT0			32
-#define IRQ_EP93XX_EXT1			33
-#define IRQ_EP93XX_EXT2			34
-#define IRQ_EP93XX_64HZ			35
-#define IRQ_EP93XX_WATCHDOG		36
-#define IRQ_EP93XX_RTC			37
-#define IRQ_EP93XX_IRDA			38
-#define IRQ_EP93XX_ETHERNET		39
-#define IRQ_EP93XX_EXT3			40
-#define IRQ_EP93XX_PROG			41
-#define IRQ_EP93XX_1HZ			42
-#define IRQ_EP93XX_VSYNC		43
-#define IRQ_EP93XX_VIDEO_FIFO		44
-#define IRQ_EP93XX_SSP1RX		45
-#define IRQ_EP93XX_SSP1TX		46
-#define IRQ_EP93XX_GPIO4MUX		47
-#define IRQ_EP93XX_GPIO5MUX		48
-#define IRQ_EP93XX_GPIO6MUX		49
-#define IRQ_EP93XX_GPIO7MUX		50
-#define IRQ_EP93XX_TIMER3		51
-#define IRQ_EP93XX_UART1		52
-#define IRQ_EP93XX_SSP			53
-#define IRQ_EP93XX_UART2		54
-#define IRQ_EP93XX_UART3		55
-#define IRQ_EP93XX_USB			56
-#define IRQ_EP93XX_ETHERNET_PME		57
-#define IRQ_EP93XX_DSP			58
-#define IRQ_EP93XX_GPIO_AB		59
-#define IRQ_EP93XX_SAI			60
-#define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
-
-#define NR_EP93XX_IRQS			(64 + 24)
-
-#define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
-#define EP93XX_BOARD_IRQS		32
-
-#define NR_IRQS				(NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
-
-
-#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
deleted file mode 100644
index b3ec1db988db..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-ep93xx/include/mach/uncompress.h
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#include <mach/ep93xx-regs.h>
-#include <asm/mach-types.h>
-
-static unsigned char __raw_readb(unsigned int ptr)
-{
-	return *((volatile unsigned char *)ptr);
-}
-
-static unsigned int __raw_readl(unsigned int ptr)
-{
-	return *((volatile unsigned int *)ptr);
-}
-
-static void __raw_writeb(unsigned char value, unsigned int ptr)
-{
-	*((volatile unsigned char *)ptr) = value;
-}
-
-static void __raw_writel(unsigned int value, unsigned int ptr)
-{
-	*((volatile unsigned int *)ptr) = value;
-}
-
-#define PHYS_UART_DATA		(CONFIG_DEBUG_UART_PHYS + 0x00)
-#define PHYS_UART_FLAG		(CONFIG_DEBUG_UART_PHYS + 0x18)
-#define UART_FLAG_TXFF		0x20
-
-static inline void putc(int c)
-{
-	int i;
-
-	for (i = 0; i < 10000; i++) {
-		/* Transmit fifo not full? */
-		if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
-			break;
-	}
-
-	__raw_writeb(c, PHYS_UART_DATA);
-}
-
-static inline void flush(void)
-{
-}
-
-
-/*
- * Some bootloaders don't turn off DMA from the ethernet MAC before
- * jumping to linux, which means that we might end up with bits of RX
- * status and packet data scribbled over the uncompressed kernel image.
- * Work around this by resetting the ethernet MAC before we uncompress.
- */
-#define PHYS_ETH_SELF_CTL		0x80010020
-#define ETH_SELF_CTL_RESET		0x00000001
-
-static void ethernet_reset(void)
-{
-	unsigned int v;
-
-	/* Reset the ethernet MAC.  */
-	v = __raw_readl(PHYS_ETH_SELF_CTL);
-	__raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
-
-	/* Wait for reset to finish.  */
-	while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
-		;
-}
-
-#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
-#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
-#define TS72XX_WDT_FEED_VAL		0x05
-
-static void __maybe_unused ts72xx_watchdog_disable(void)
-{
-	__raw_writeb(TS72XX_WDT_FEED_VAL, TS72XX_WDT_FEED_PHYS_BASE);
-	__raw_writeb(0, TS72XX_WDT_CONTROL_PHYS_BASE);
-}
-
-static void arch_decomp_setup(void)
-{
-	if (machine_is_ts72xx())
-		ts72xx_watchdog_disable();
-	ethernet_reset();
-}
diff --git a/arch/arm/mach-ep93xx/irqs.h b/arch/arm/mach-ep93xx/irqs.h
new file mode 100644
index 000000000000..353201b90c66
--- /dev/null
+++ b/arch/arm/mach-ep93xx/irqs.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define IRQ_EP93XX_VIC0			1
+
+#define IRQ_EP93XX_COMMRX		(IRQ_EP93XX_VIC0 + 2)
+#define IRQ_EP93XX_COMMTX		(IRQ_EP93XX_VIC0 + 3)
+#define IRQ_EP93XX_TIMER1		(IRQ_EP93XX_VIC0 + 4)
+#define IRQ_EP93XX_TIMER2		(IRQ_EP93XX_VIC0 + 5)
+#define IRQ_EP93XX_AACINTR		(IRQ_EP93XX_VIC0 + 6)
+#define IRQ_EP93XX_DMAM2P0		(IRQ_EP93XX_VIC0 + 7)
+#define IRQ_EP93XX_DMAM2P1		(IRQ_EP93XX_VIC0 + 8)
+#define IRQ_EP93XX_DMAM2P2		(IRQ_EP93XX_VIC0 + 9)
+#define IRQ_EP93XX_DMAM2P3		(IRQ_EP93XX_VIC0 + 10)
+#define IRQ_EP93XX_DMAM2P4		(IRQ_EP93XX_VIC0 + 11)
+#define IRQ_EP93XX_DMAM2P5		(IRQ_EP93XX_VIC0 + 12)
+#define IRQ_EP93XX_DMAM2P6		(IRQ_EP93XX_VIC0 + 13)
+#define IRQ_EP93XX_DMAM2P7		(IRQ_EP93XX_VIC0 + 14)
+#define IRQ_EP93XX_DMAM2P8		(IRQ_EP93XX_VIC0 + 15)
+#define IRQ_EP93XX_DMAM2P9		(IRQ_EP93XX_VIC0 + 16)
+#define IRQ_EP93XX_DMAM2M0		(IRQ_EP93XX_VIC0 + 17)
+#define IRQ_EP93XX_DMAM2M1		(IRQ_EP93XX_VIC0 + 18)
+#define IRQ_EP93XX_GPIO0MUX		(IRQ_EP93XX_VIC0 + 19)
+#define IRQ_EP93XX_GPIO1MUX		(IRQ_EP93XX_VIC0 + 20)
+#define IRQ_EP93XX_GPIO2MUX		(IRQ_EP93XX_VIC0 + 21)
+#define IRQ_EP93XX_GPIO3MUX		(IRQ_EP93XX_VIC0 + 22)
+#define IRQ_EP93XX_UART1RX		(IRQ_EP93XX_VIC0 + 23)
+#define IRQ_EP93XX_UART1TX		(IRQ_EP93XX_VIC0 + 24)
+#define IRQ_EP93XX_UART2RX		(IRQ_EP93XX_VIC0 + 25)
+#define IRQ_EP93XX_UART2TX		(IRQ_EP93XX_VIC0 + 26)
+#define IRQ_EP93XX_UART3RX		(IRQ_EP93XX_VIC0 + 27)
+#define IRQ_EP93XX_UART3TX		(IRQ_EP93XX_VIC0 + 28)
+#define IRQ_EP93XX_KEY			(IRQ_EP93XX_VIC0 + 29)
+#define IRQ_EP93XX_TOUCH		(IRQ_EP93XX_VIC0 + 30)
+#define EP93XX_VIC1_VALID_IRQ_MASK	0x7ffffffc
+
+#define IRQ_EP93XX_VIC1			(IRQ_EP93XX_VIC0 + 32)
+
+#define IRQ_EP93XX_EXT0			(IRQ_EP93XX_VIC1 + 0)
+#define IRQ_EP93XX_EXT1			(IRQ_EP93XX_VIC1 + 1)
+#define IRQ_EP93XX_EXT2			(IRQ_EP93XX_VIC1 + 2)
+#define IRQ_EP93XX_64HZ			(IRQ_EP93XX_VIC1 + 3)
+#define IRQ_EP93XX_WATCHDOG		(IRQ_EP93XX_VIC1 + 4)
+#define IRQ_EP93XX_RTC			(IRQ_EP93XX_VIC1 + 5)
+#define IRQ_EP93XX_IRDA			(IRQ_EP93XX_VIC1 + 6)
+#define IRQ_EP93XX_ETHERNET		(IRQ_EP93XX_VIC1 + 7)
+#define IRQ_EP93XX_EXT3			(IRQ_EP93XX_VIC1 + 8)
+#define IRQ_EP93XX_PROG			(IRQ_EP93XX_VIC1 + 9)
+#define IRQ_EP93XX_1HZ			(IRQ_EP93XX_VIC1 + 10)
+#define IRQ_EP93XX_VSYNC		(IRQ_EP93XX_VIC1 + 11)
+#define IRQ_EP93XX_VIDEO_FIFO		(IRQ_EP93XX_VIC1 + 12)
+#define IRQ_EP93XX_SSP1RX		(IRQ_EP93XX_VIC1 + 13)
+#define IRQ_EP93XX_SSP1TX		(IRQ_EP93XX_VIC1 + 14)
+#define IRQ_EP93XX_GPIO4MUX		(IRQ_EP93XX_VIC1 + 15)
+#define IRQ_EP93XX_GPIO5MUX		(IRQ_EP93XX_VIC1 + 16)
+#define IRQ_EP93XX_GPIO6MUX		(IRQ_EP93XX_VIC1 + 17)
+#define IRQ_EP93XX_GPIO7MUX		(IRQ_EP93XX_VIC1 + 18)
+#define IRQ_EP93XX_TIMER3		(IRQ_EP93XX_VIC1 + 19)
+#define IRQ_EP93XX_UART1		(IRQ_EP93XX_VIC1 + 20)
+#define IRQ_EP93XX_SSP			(IRQ_EP93XX_VIC1 + 21)
+#define IRQ_EP93XX_UART2		(IRQ_EP93XX_VIC1 + 22)
+#define IRQ_EP93XX_UART3		(IRQ_EP93XX_VIC1 + 23)
+#define IRQ_EP93XX_USB			(IRQ_EP93XX_VIC1 + 24)
+#define IRQ_EP93XX_ETHERNET_PME		(IRQ_EP93XX_VIC1 + 25)
+#define IRQ_EP93XX_DSP			(IRQ_EP93XX_VIC1 + 26)
+#define IRQ_EP93XX_GPIO_AB		(IRQ_EP93XX_VIC1 + 27)
+#define IRQ_EP93XX_SAI			(IRQ_EP93XX_VIC1 + 28)
+#define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
+
+#define NR_EP93XX_IRQS			(IRQ_EP93XX_VIC1 + 32 + 24)
+
+#define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
+#define EP93XX_BOARD_IRQS		32
+
+#endif
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
deleted file mode 100644
index b18ebf26da45..000000000000
--- a/arch/arm/mach-ep93xx/micro9.c
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-ep93xx/micro9.c
- *
- * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
- *                    Manfred Gruber <m.gruber@tirol.com>
- * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
- *                    Hubert Feurstein <hubert.feurstein@contec.at>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include "hardware.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-/*************************************************************************
- * Micro9 NOR Flash
- *
- * Micro9-High has up to 64MB of 32-bit flash on CS1
- * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
- * Micro9-Lite uses a separate MTD map driver for flash support
- * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
- *************************************************************************/
-static unsigned int __init micro9_detect_bootwidth(void)
-{
-	u32 v;
-
-	/* Detect the bus width of the external flash memory */
-	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
-	if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
-		return 4; /* 32-bit */
-	else
-		return 2; /* 16-bit */
-}
-
-static void __init micro9_register_flash(void)
-{
-	unsigned int width;
-
-	if (machine_is_micro9())
-		width = 4;
-	else if (machine_is_micro9m() || machine_is_micro9s())
-		width = micro9_detect_bootwidth();
-	else
-		width = 0;
-
-	if (width)
-		ep93xx_register_flash(width, EP93XX_CS1_PHYS_BASE, SZ_64M);
-}
-
-
-/*************************************************************************
- * Micro9 Ethernet
- *************************************************************************/
-static struct ep93xx_eth_data __initdata micro9_eth_data = {
-	.phy_id		= 0x1f,
-};
-
-
-static void __init micro9_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_eth(&micro9_eth_data, 1);
-	micro9_register_flash();
-}
-
-
-#ifdef CONFIG_MACH_MICRO9H
-MACHINE_START(MICRO9, "Contec Micro9-High")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= micro9_init_machine,
-	.init_late	= ep93xx_init_late,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICRO9M
-MACHINE_START(MICRO9M, "Contec Micro9-Mid")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= micro9_init_machine,
-	.init_late	= ep93xx_init_late,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICRO9L
-MACHINE_START(MICRO9L, "Contec Micro9-Lite")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= micro9_init_machine,
-	.init_late	= ep93xx_init_late,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICRO9S
-MACHINE_START(MICRO9S, "Contec Micro9-Slim")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= micro9_init_machine,
-	.init_late	= ep93xx_init_late,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ep93xx/platform.h b/arch/arm/mach-ep93xx/platform.h
index b4045a186239..5fb1b919133f 100644
--- a/arch/arm/mach-ep93xx/platform.h
+++ b/arch/arm/mach-ep93xx/platform.h
@@ -38,12 +38,5 @@ struct device *ep93xx_init_devices(void);
 extern void ep93xx_timer_init(void);
 
 void ep93xx_restart(enum reboot_mode, const char *);
-void ep93xx_init_late(void);
-
-#ifdef CONFIG_CRUNCH
-int crunch_init(void);
-#else
-static inline int crunch_init(void) { return 0; }
-#endif
 
 #endif
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
deleted file mode 100644
index 8a53b74dc4b2..000000000000
--- a/arch/arm/mach-ep93xx/simone.c
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/simone.c
- * Simplemachines Sim.One support.
- *
- * Copyright (C) 2010 Ryan Mallon
- *
- * Based on the 2.6.24.7 support:
- *   Copyright (C) 2009 Simplemachines
- *   MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-
-#include "hardware.h"
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata simone_eth_data = {
-	.phy_id		= 1,
-};
-
-static struct ep93xxfb_mach_info __initdata simone_fb_info = {
-	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
-};
-
-static struct mmc_spi_platform_data simone_mmc_spi_data = {
-	.detect_delay	= 500,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table simone_mmc_spi_gpio_table = {
-	.dev_id = "mmc_spi.0", /* "mmc_spi" @ CS0 */
-	.table = {
-		/* Card detect */
-		GPIO_LOOKUP_IDX("A", 0, NULL, 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct spi_board_info simone_spi_devices[] __initdata = {
-	{
-		.modalias		= "mmc_spi",
-		.platform_data		= &simone_mmc_spi_data,
-		/*
-		 * We use 10 MHz even though the maximum is 3.7 MHz. The driver
-		 * will limit it automatically to max. frequency.
-		 */
-		.max_speed_hz		= 10 * 1000 * 1000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-		.mode			= SPI_MODE_3,
-	},
-};
-
-/*
- * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
- * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
- * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
- */
-static struct gpiod_lookup_table simone_spi_cs_gpio_table = {
-	.dev_id = "spi0",
-	.table = {
-		GPIO_LOOKUP("A", 1, "cs", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct ep93xx_spi_info simone_spi_info __initdata = {
-	.use_dma = 1,
-};
-
-static struct i2c_board_info __initdata simone_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-	},
-};
-
-static struct platform_device simone_audio_device = {
-	.name		= "simone-audio",
-	.id		= -1,
-};
-
-static void __init simone_register_audio(void)
-{
-	ep93xx_register_ac97();
-	platform_device_register(&simone_audio_device);
-}
-
-static void __init simone_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
-	ep93xx_register_eth(&simone_eth_data, 1);
-	ep93xx_register_fb(&simone_fb_info);
-	ep93xx_register_i2c(simone_i2c_board_info,
-			    ARRAY_SIZE(simone_i2c_board_info));
-	gpiod_add_lookup_table(&simone_mmc_spi_gpio_table);
-	gpiod_add_lookup_table(&simone_spi_cs_gpio_table);
-	ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
-			    ARRAY_SIZE(simone_spi_devices));
-	simone_register_audio();
-}
-
-MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
-	/* Maintainer: Ryan Mallon */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= simone_init_machine,
-	.init_late	= ep93xx_init_late,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
deleted file mode 100644
index 703f25f19d51..000000000000
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/snappercl15.c
- * Bluewater Systems Snapper CL15 system module
- *
- * Copyright (C) 2009 Bluewater Systems Ltd
- * Author: Ryan Mallon
- *
- * NAND code adapted from driver by:
- *   Andre Renaud <andre@bluewatersys.com>
- *   James R. McKaskill
- */
-
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-
-#include <linux/mtd/platnand.h>
-
-#include "hardware.h"
-#include <linux/platform_data/video-ep93xx.h>
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-#define SNAPPERCL15_NAND_BASE	(EP93XX_CS7_PHYS_BASE + SZ_16M)
-
-#define SNAPPERCL15_NAND_WPN	(1 << 8)  /* Write protect (active low) */
-#define SNAPPERCL15_NAND_ALE	(1 << 9)  /* Address latch */
-#define SNAPPERCL15_NAND_CLE	(1 << 10) /* Command latch */
-#define SNAPPERCL15_NAND_CEN	(1 << 11) /* Chip enable (active low) */
-#define SNAPPERCL15_NAND_RDY	(1 << 14) /* Device ready */
-
-#define NAND_CTRL_ADDR(chip) 	(chip->legacy.IO_ADDR_W + 0x40)
-
-static void snappercl15_nand_cmd_ctrl(struct nand_chip *chip, int cmd,
-				      unsigned int ctrl)
-{
-	static u16 nand_state = SNAPPERCL15_NAND_WPN;
-	u16 set;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		set = SNAPPERCL15_NAND_CEN | SNAPPERCL15_NAND_WPN;
-
-		if (ctrl & NAND_NCE)
-			set &= ~SNAPPERCL15_NAND_CEN;
-		if (ctrl & NAND_CLE)
-			set |= SNAPPERCL15_NAND_CLE;
-		if (ctrl & NAND_ALE)
-			set |= SNAPPERCL15_NAND_ALE;
-
-		nand_state &= ~(SNAPPERCL15_NAND_CEN |
-				SNAPPERCL15_NAND_CLE |
-				SNAPPERCL15_NAND_ALE);
-		nand_state |= set;
-		__raw_writew(nand_state, NAND_CTRL_ADDR(chip));
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		__raw_writew((cmd & 0xff) | nand_state,
-			     chip->legacy.IO_ADDR_W);
-}
-
-static int snappercl15_nand_dev_ready(struct nand_chip *chip)
-{
-	return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
-}
-
-static struct mtd_partition snappercl15_nand_parts[] = {
-	{
-		.name		= "Kernel",
-		.offset		= 0,
-		.size		= SZ_2M,
-	},
-	{
-		.name		= "Filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct platform_nand_data snappercl15_nand_data = {
-	.chip = {
-		.nr_chips		= 1,
-		.partitions		= snappercl15_nand_parts,
-		.nr_partitions		= ARRAY_SIZE(snappercl15_nand_parts),
-		.chip_delay		= 25,
-	},
-	.ctrl = {
-		.dev_ready		= snappercl15_nand_dev_ready,
-		.cmd_ctrl		= snappercl15_nand_cmd_ctrl,
-	},
-};
-
-static struct resource snappercl15_nand_resource[] = {
-	{
-		.start		= SNAPPERCL15_NAND_BASE,
-		.end		= SNAPPERCL15_NAND_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device snappercl15_nand_device = {
-	.name			= "gen_nand",
-	.id			= -1,
-	.dev.platform_data	= &snappercl15_nand_data,
-	.resource		= snappercl15_nand_resource,
-	.num_resources		= ARRAY_SIZE(snappercl15_nand_resource),
-};
-
-static struct ep93xx_eth_data __initdata snappercl15_eth_data = {
-	.phy_id			= 1,
-};
-
-static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
-	{
-		/* Audio codec */
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = {
-};
-
-static struct platform_device snappercl15_audio_device = {
-	.name		= "snappercl15-audio",
-	.id		= -1,
-};
-
-static void __init snappercl15_register_audio(void)
-{
-	ep93xx_register_i2s();
-	platform_device_register(&snappercl15_audio_device);
-}
-
-static void __init snappercl15_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_eth(&snappercl15_eth_data, 1);
-	ep93xx_register_i2c(snappercl15_i2c_data,
-			    ARRAY_SIZE(snappercl15_i2c_data));
-	ep93xx_register_fb(&snappercl15_fb_info);
-	snappercl15_register_audio();
-	platform_device_register(&snappercl15_nand_device);
-}
-
-MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
-	/* Maintainer: Ryan Mallon */
-	.atag_offset	= 0x100,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= snappercl15_init_machine,
-	.init_late	= ep93xx_init_late,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h
index f2dace1c9154..3245ebbd5069 100644
--- a/arch/arm/mach-ep93xx/soc.h
+++ b/arch/arm/mach-ep93xx/soc.h
@@ -9,7 +9,8 @@
 #ifndef _EP93XX_SOC_H
 #define _EP93XX_SOC_H
 
-#include <mach/ep93xx-regs.h>
+#include "ep93xx-regs.h"
+#include "irqs.h"
 
 /*
  * EP93xx Physical Memory Map:
@@ -111,19 +112,19 @@
 #define EP93XX_SYSCON_PWRCNT		EP93XX_SYSCON_REG(0x04)
 #define EP93XX_SYSCON_PWRCNT_FIR_EN	(1<<31)
 #define EP93XX_SYSCON_PWRCNT_UARTBAUD	(1<<29)
-#define EP93XX_SYSCON_PWRCNT_USH_EN	(1<<28)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2M1	(1<<27)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2M0	(1<<26)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P8	(1<<25)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P9	(1<<24)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P6	(1<<23)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P7	(1<<22)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P4	(1<<21)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P5	(1<<20)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P2	(1<<19)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P3	(1<<18)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P0	(1<<17)
-#define EP93XX_SYSCON_PWRCNT_DMA_M2P1	(1<<16)
+#define EP93XX_SYSCON_PWRCNT_USH_EN	28
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M1	27
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M0	26
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P8	25
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P9	24
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P6	23
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P7	22
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P4	21
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P5	20
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P2	19
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P3	18
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P0	17
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P1	16
 #define EP93XX_SYSCON_HALT		EP93XX_SYSCON_REG(0x08)
 #define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
 #define EP93XX_SYSCON_CLKSET1		EP93XX_SYSCON_REG(0x20)
@@ -139,13 +140,13 @@
 #define EP93XX_SYSCON_DEVCFG_GONK	(1<<27)
 #define EP93XX_SYSCON_DEVCFG_TONG	(1<<26)
 #define EP93XX_SYSCON_DEVCFG_MONG	(1<<25)
-#define EP93XX_SYSCON_DEVCFG_U3EN	(1<<24)
+#define EP93XX_SYSCON_DEVCFG_U3EN	24
 #define EP93XX_SYSCON_DEVCFG_CPENA	(1<<23)
 #define EP93XX_SYSCON_DEVCFG_A2ONG	(1<<22)
 #define EP93XX_SYSCON_DEVCFG_A1ONG	(1<<21)
-#define EP93XX_SYSCON_DEVCFG_U2EN	(1<<20)
+#define EP93XX_SYSCON_DEVCFG_U2EN	20
 #define EP93XX_SYSCON_DEVCFG_EXVC	(1<<19)
-#define EP93XX_SYSCON_DEVCFG_U1EN	(1<<18)
+#define EP93XX_SYSCON_DEVCFG_U1EN	18
 #define EP93XX_SYSCON_DEVCFG_TIN	(1<<17)
 #define EP93XX_SYSCON_DEVCFG_HC3IN	(1<<15)
 #define EP93XX_SYSCON_DEVCFG_HC3EN	(1<<14)
@@ -163,12 +164,12 @@
 #define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
 #define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
 #define EP93XX_SYSCON_VIDCLKDIV		EP93XX_SYSCON_REG(0x84)
-#define EP93XX_SYSCON_CLKDIV_ENABLE	(1<<15)
+#define EP93XX_SYSCON_CLKDIV_ENABLE	15
 #define EP93XX_SYSCON_CLKDIV_ESEL	(1<<14)
 #define EP93XX_SYSCON_CLKDIV_PSEL	(1<<13)
 #define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT	8
 #define EP93XX_SYSCON_I2SCLKDIV		EP93XX_SYSCON_REG(0x8c)
-#define EP93XX_SYSCON_I2SCLKDIV_SENA	(1<<31)
+#define EP93XX_SYSCON_I2SCLKDIV_SENA	31
 #define EP93XX_SYSCON_I2SCLKDIV_ORIDE   (1<<29)
 #define EP93XX_SYSCON_I2SCLKDIV_SPOL	(1<<19)
 #define EP93XX_I2SCLKDIV_SDIV		(1 << 16)
@@ -177,9 +178,9 @@
 #define EP93XX_I2SCLKDIV_LRDIV128	(2 << 17)
 #define EP93XX_I2SCLKDIV_LRDIV_MASK	(3 << 17)
 #define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
-#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	(1<<31)
-#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
-#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	(1<<15)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	31
+#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	16
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	15
 #define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
 #define EP93XX_SYSCON_SYSCFG		EP93XX_SYSCON_REG(0x9c)
 #define EP93XX_SYSCON_SYSCFG_REV_MASK	(0xf0000000)
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index e0e1b11032f1..d3de7283ecb3 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -22,7 +22,6 @@
 
 #include "gpio-ep93xx.h"
 #include "hardware.h"
-#include <mach/irqs.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -151,7 +150,7 @@ static struct platform_device ts72xx_nand_flash = {
 	.num_resources		= ARRAY_SIZE(ts72xx_nand_resource),
 };
 
-void __init ts72xx_register_flash(struct mtd_partition *parts, int n,
+static void __init ts72xx_register_flash(struct mtd_partition *parts, int n,
 				  resource_size_t start)
 {
 	/*
@@ -350,11 +349,11 @@ static void __init ts72xx_init_machine(void)
 MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
 	.init_machine	= ts72xx_init_machine,
-	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
 
@@ -414,10 +413,10 @@ static void __init bk3_init_machine(void)
 MACHINE_START(BK3, "Liebherr controller BK3.1")
 	/* Maintainer: Lukasz Majewski <lukma@denx.de> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
 	.init_machine	= bk3_init_machine,
-	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index cbcba3136d74..30d9cf3791eb 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -302,10 +302,10 @@ static void __init vision_init_machine(void)
 MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS + EP93XX_BOARD_IRQS,
 	.map_io		= vision_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
 	.init_machine	= vision_init_machine,
-	.init_late	= ep93xx_init_late,
 	.restart	= ep93xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 5a48abac6af4..4d3b40e4049a 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -8,21 +8,16 @@
 menuconfig ARCH_EXYNOS
 	bool "Samsung Exynos"
 	depends on ARCH_MULTI_V7
-	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
 	select EXYNOS_IRQ_COMBINER
 	select COMMON_CLK_SAMSUNG
-	select EXYNOS_CHIPID
 	select EXYNOS_THERMAL
 	select EXYNOS_PMU
 	select EXYNOS_SROM
 	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
-	select GPIOLIB
 	select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5
 	select HAVE_ARM_SCU if SMP
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC if RTC_CLASS
 	select PINCTRL
 	select PINCTRL_EXYNOS
 	select PM_GENERIC_DOMAINS if PM
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 25b01da4771b..966a0995e047 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -50,11 +50,14 @@ void __init exynos_sysram_init(void)
 	struct device_node *node;
 
 	for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
+		struct resource res;
 		if (!of_device_is_available(node))
 			continue;
-		sysram_base_addr = of_iomap(node, 0);
-		sysram_base_phys = of_translate_address(node,
-					   of_get_address(node, 0, NULL, NULL));
+
+		of_address_to_resource(node, 0, &res);
+		sysram_base_addr = ioremap(res.start, resource_size(&res));
+		sysram_base_phys = res.start;
+		of_node_put(node);
 		break;
 	}
 
@@ -62,6 +65,7 @@ void __init exynos_sysram_init(void)
 		if (!of_device_is_available(node))
 			continue;
 		sysram_ns_base_addr = of_iomap(node, 0);
+		of_node_put(node);
 		break;
 	}
 }
@@ -147,6 +151,7 @@ static void exynos_map_pmu(void)
 	np = of_find_matching_node(NULL, exynos_dt_pmu_match);
 	if (np)
 		pmu_base_addr = of_iomap(np, 0);
+	of_node_put(np);
 }
 
 static void __init exynos_init_irq(void)
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 2eaf2dbb8e81..2da5b60b59e2 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -60,8 +60,10 @@ static int exynos_cpu_boot(int cpu)
 	/*
 	 * Exynos3250 doesn't need to send smc command for secondary CPU boot
 	 * because Exynos3250 removes WFE in secure mode.
+	 *
+	 * On Exynos5 devices the call is ignored by trustzone firmware.
 	 */
-	if (soc_is_exynos3250())
+	if (!soc_is_exynos4210() && !soc_is_exynos4412())
 		return 0;
 
 	/*
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index cd861c57d5ad..fd0dbeb93357 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -35,7 +35,6 @@ static bool secure_firmware __ro_after_init;
  */
 #define exynos_v7_exit_coherency_flush(level) \
 	asm volatile( \
-	"stmfd	sp!, {fp, ip}\n\t"\
 	"mrc	p15, 0, r0, c1, c0, 0	@ get SCTLR\n\t" \
 	"bic	r0, r0, #"__stringify(CR_C)"\n\t" \
 	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR\n\t" \
@@ -50,11 +49,10 @@ static bool secure_firmware __ro_after_init;
 	"mcr	p15, 0, r0, c1, c0, 1	@ set ACTLR\n\t" \
 	"isb\n\t" \
 	"dsb\n\t" \
-	"ldmfd	sp!, {fp, ip}" \
 	: \
 	: "Ir" (pmu_base_addr + S5P_INFORM0) \
-	: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
-	  "r9", "r10", "lr", "memory")
+	: "r0", "r1", "r2", "r3", "r4", "r5", "r6", \
+	  "r9", "r10", "ip", "lr", "memory")
 
 static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
 {
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index ea0be59f469a..fb4a394ece3a 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -78,12 +78,11 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 #endif /* CONFIG_HOTPLUG_CPU */
 
 /**
- * exynos_core_power_down : power down the specified cpu
- * @cpu : the cpu to power down
+ * exynos_cpu_power_down() - power down the specified cpu
+ * @cpu: the cpu to power down
  *
  * Power down the specified cpu. The sequence must be finished by a
  * call to cpu_do_idle()
- *
  */
 void exynos_cpu_power_down(int cpu)
 {
@@ -107,8 +106,8 @@ void exynos_cpu_power_down(int cpu)
 }
 
 /**
- * exynos_cpu_power_up : power up the specified cpu
- * @cpu : the cpu to power up
+ * exynos_cpu_power_up() - power up the specified cpu
+ * @cpu: the cpu to power up
  *
  * Power up the specified cpu
  */
@@ -124,9 +123,8 @@ void exynos_cpu_power_up(int cpu)
 }
 
 /**
- * exynos_cpu_power_state : returns the power state of the cpu
- * @cpu : the cpu to retrieve the power state from
- *
+ * exynos_cpu_power_state() - returns the power state of the cpu
+ * @cpu: the cpu to retrieve the power state from
  */
 int exynos_cpu_power_state(int cpu)
 {
@@ -135,8 +133,8 @@ int exynos_cpu_power_state(int cpu)
 }
 
 /**
- * exynos_cluster_power_down : power down the specified cluster
- * @cluster : the cluster to power down
+ * exynos_cluster_power_down() - power down the specified cluster
+ * @cluster: the cluster to power down
  */
 void exynos_cluster_power_down(int cluster)
 {
@@ -144,8 +142,8 @@ void exynos_cluster_power_down(int cluster)
 }
 
 /**
- * exynos_cluster_power_up : power up the specified cluster
- * @cluster : the cluster to power up
+ * exynos_cluster_power_up() - power up the specified cluster
+ * @cluster: the cluster to power up
  */
 void exynos_cluster_power_up(int cluster)
 {
@@ -154,8 +152,8 @@ void exynos_cluster_power_up(int cluster)
 }
 
 /**
- * exynos_cluster_power_state : returns the power state of the cluster
- * @cluster : the cluster to retrieve the power state from
+ * exynos_cluster_power_state() - returns the power state of the cluster
+ * @cluster: the cluster to retrieve the power state from
  *
  */
 int exynos_cluster_power_state(int cluster)
@@ -165,7 +163,7 @@ int exynos_cluster_power_state(int cluster)
 }
 
 /**
- * exynos_scu_enable : enables SCU for Cortex-A9 based system
+ * exynos_scu_enable() - enables SCU for Cortex-A9 based system
  */
 void exynos_scu_enable(void)
 {
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 3bf14ca78b62..6d5d7696aaf7 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -667,7 +667,7 @@ void __init exynos_pm_init(void)
 		return;
 	}
 
-	if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) {
+	if (WARN_ON(!of_property_read_bool(np, "interrupt-controller"))) {
 		pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
 		of_node_put(np);
 		return;
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index 844aa585b966..78189997caa1 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -1,58 +1,25 @@
 # SPDX-License-Identifier: GPL-2.0-only
-if ARCH_FOOTBRIDGE
-
-menu "Footbridge Implementations"
-
-config ARCH_CATS
-	bool "CATS"
-	select CLKEVT_I8253
-	select CLKSRC_I8253
-	select FOOTBRIDGE_HOST
-	select ISA
-	select ISA_DMA
-	select FORCE_PCI
-	help
-	  Say Y here if you intend to run this kernel on the CATS.
-
-	  Saying N will reduce the size of the Footbridge kernel.
-
-config ARCH_PERSONAL_SERVER
-	bool "Compaq Personal Server"
-	select FOOTBRIDGE_HOST
-	select ISA
-	select ISA_DMA
-	select FORCE_PCI
-	help
-	  Say Y here if you intend to run this kernel on the Compaq
-	  Personal Server.
-
-	  Saying N will reduce the size of the Footbridge kernel.
-
-	  The Compaq Personal Server is not available for purchase.
-	  There are no product plans beyond the current research
-	  prototypes at this time.  Information is available at:
-
-	  <http://www.crl.hpl.hp.com/projects/personalserver/>
-
-	  If you have any questions or comments about the  Compaq Personal
-	  Server, send e-mail to <skiff@crl.dec.com>.
-
-config ARCH_EBSA285_ADDIN
-	bool "EBSA285 (addin mode)"
-	select ARCH_EBSA285
-	select FOOTBRIDGE_ADDIN
+menuconfig ARCH_FOOTBRIDGE
+	bool "FootBridge Implementations"
+	depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5)
+	depends on !(ARCH_MOXART || ARCH_GEMINI || ARCH_SA1100)
+	depends on ATAGS
+	depends on CPU_LITTLE_ENDIAN
+	depends on MMU
+	select ARCH_NO_SG_CHAIN
+	select CPU_SA110
+	select FOOTBRIDGE
+	select NEED_MACH_MEMORY_H
 	help
-	  Say Y here if you intend to run this kernel on the EBSA285 card
-	  in addin mode.
+	  Support for systems based on the DC21285 companion chip
+	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
-	  Saying N will reduce the size of the Footbridge kernel.
+if ARCH_FOOTBRIDGE
 
 config ARCH_EBSA285_HOST
 	bool "EBSA285 (host mode)"
 	select ARCH_EBSA285
-	select FOOTBRIDGE_HOST
 	select ISA
-	select ISA_DMA
 	select ARCH_MAY_HAVE_PC_FDC
 	select FORCE_PCI
 	help
@@ -65,9 +32,7 @@ config ARCH_NETWINDER
 	bool "NetWinder"
 	select CLKEVT_I8253
 	select CLKSRC_I8253
-	select FOOTBRIDGE_HOST
 	select ISA
-	select ISA_DMA
 	select FORCE_PCI
 	help
 	  Say Y here if you intend to run this kernel on the Rebel.COM
@@ -77,22 +42,12 @@ config ARCH_NETWINDER
 
 	  Saying N will reduce the size of the Footbridge kernel.
 
-endmenu
-
 # Footbridge support
 config FOOTBRIDGE
-	bool
-
-# Footbridge in host mode
-config FOOTBRIDGE_HOST
-	bool
+	def_bool y
 	select ARCH_MIGHT_HAVE_PC_SERIO
+	select ISA_DMA_API
 
-# Footbridge in addin mode
-config FOOTBRIDGE_ADDIN
-	bool
-
-# EBSA285 board in either host or addin mode
 config ARCH_EBSA285
 	bool
 
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index a09f1041f141..1553cc01b45c 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -5,19 +5,14 @@
 
 # Object file lists.
 
-obj-y			:= common.o dma.o isa-irq.o
+obj-y			:= common.o isa-irq.o isa.o isa-rtc.o dma-isa.o
 
 pci-y			+= dc21285.o
-pci-$(CONFIG_ARCH_CATS) += cats-pci.o
-pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o
+pci-$(CONFIG_ARCH_EBSA285) += ebsa285-pci.o
 pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
-pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o
 
-obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
 obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
 obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
-obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o
 
 obj-$(CONFIG_PCI)	+=$(pci-y)
 
-obj-$(CONFIG_ISA)	+= isa.o isa-rtc.o
diff --git a/arch/arm/mach-footbridge/Makefile.boot b/arch/arm/mach-footbridge/Makefile.boot
deleted file mode 100644
index e4313e912cac..000000000000
--- a/arch/arm/mach-footbridge/Makefile.boot
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
deleted file mode 100644
index e575dc0698cd..000000000000
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-footbridge/cats-hw.c
- *
- * CATS machine fixup
- *
- * Copyright (C) 1998, 1999 Russell King, Phil Blundell
- */
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/screen_info.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm/hardware/dec21285.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-#define CFG_PORT	0x370
-#define INDEX_PORT	(CFG_PORT)
-#define DATA_PORT	(CFG_PORT + 1)
-
-static int __init cats_hw_init(void)
-{
-	if (machine_is_cats()) {
-		/* Set Aladdin to CONFIGURE mode */
-		outb(0x51, CFG_PORT);
-		outb(0x23, CFG_PORT);
-
-		/* Select logical device 3 */
-		outb(0x07, INDEX_PORT);
-		outb(0x03, DATA_PORT);
-
-		/* Set parallel port to DMA channel 3, ECP+EPP1.9, 
-		   enable EPP timeout */
-		outb(0x74, INDEX_PORT);
-		outb(0x03, DATA_PORT);
-	
-		outb(0xf0, INDEX_PORT);
-		outb(0x0f, DATA_PORT);
-
-		outb(0xf1, INDEX_PORT);
-		outb(0x07, DATA_PORT);
-
-		/* Select logical device 4 */
-		outb(0x07, INDEX_PORT);
-		outb(0x04, DATA_PORT);
-
-		/* UART1 high speed mode */
-		outb(0xf0, INDEX_PORT);
-		outb(0x02, DATA_PORT);
-
-		/* Select logical device 5 */
-		outb(0x07, INDEX_PORT);
-		outb(0x05, DATA_PORT);
-
-		/* UART2 high speed mode */
-		outb(0xf0, INDEX_PORT);
-		outb(0x02, DATA_PORT);
-
-		/* Set Aladdin to RUN mode */
-		outb(0xbb, CFG_PORT);
-	}
-
-	return 0;
-}
-
-__initcall(cats_hw_init);
-
-/*
- * CATS uses soft-reboot by default, since
- * hard reboots fail on early boards.
- */
-static void __init
-fixup_cats(struct tag *tags, char **cmdline)
-{
-#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
-	screen_info.orig_video_lines  = 25;
-	screen_info.orig_video_points = 16;
-	screen_info.orig_y = 24;
-#endif
-}
-
-MACHINE_START(CATS, "Chalice-CATS")
-	/* Maintainer: Philip Blundell */
-	.atag_offset	= 0x100,
-	.reboot_mode	= REBOOT_SOFT,
-	.fixup		= fixup_cats,
-	.map_io		= footbridge_map_io,
-	.init_irq	= footbridge_init_irq,
-	.init_time	= isa_timer_init,
-	.restart	= footbridge_restart,
-MACHINE_END
diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c
deleted file mode 100644
index 0b2fd7e2e9b4..000000000000
--- a/arch/arm/mach-footbridge/cats-pci.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-footbridge/cats-pci.c
- *
- * PCI bios-type initialisation for PCI machines
- *
- * Bits taken from various places.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/* cats host-specific stuff */
-static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
-
-static u8 cats_no_swizzle(struct pci_dev *dev, u8 *pin)
-{
-	return 0;
-}
-
-static int __init cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (dev->irq >= 255)
-		return -1;	/* not a valid interrupt. */
-
-	if (dev->irq >= 128)
-		return dev->irq & 0x1f;
-
-	if (dev->irq >= 1 && dev->irq <= 4)
-		return irqmap_cats[dev->irq - 1];
-
-	if (dev->irq != 0)
-		printk("PCI: device %02x:%02x has unknown irq line %x\n",
-		       dev->bus->number, dev->devfn, dev->irq);
-
-	return -1;
-}
-
-/*
- * why not the standard PCI swizzle?  does this prevent 4-port tulip
- * cards being used (ie, pci-pci bridge based cards)?
- */
-static struct hw_pci cats_pci __initdata = {
-	.swizzle		= cats_no_swizzle,
-	.map_irq		= cats_map_irq,
-	.nr_controllers		= 1,
-	.ops			= &dc21285_ops,
-	.setup			= dc21285_setup,
-	.preinit		= dc21285_preinit,
-	.postinit		= dc21285_postinit,
-};
-
-static int __init cats_pci_init(void)
-{
-	if (machine_is_cats())
-		pci_common_init(&cats_pci);
-	return 0;
-}
-
-subsys_initcall(cats_pci_init);
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index eee095f0e2f6..85c598708c10 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <linux/dma-direct.h>
 #include <video/vga.h>
 
 #include <asm/page.h>
@@ -27,6 +28,91 @@
 
 #include "common.h"
 
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/hardware/dec21285.h>
+
+static int dc21285_get_irq(void)
+{
+	void __iomem *irqstatus = (void __iomem *)CSR_IRQ_STATUS;
+	u32 mask = readl(irqstatus);
+
+	if (mask & IRQ_MASK_SDRAMPARITY)
+		return IRQ_SDRAMPARITY;
+
+	if (mask & IRQ_MASK_UART_RX)
+		return IRQ_CONRX;
+
+	if (mask & IRQ_MASK_DMA1)
+		return IRQ_DMA1;
+
+	if (mask & IRQ_MASK_DMA2)
+		return IRQ_DMA2;
+
+	if (mask & IRQ_MASK_IN0)
+		return IRQ_IN0;
+
+	if (mask & IRQ_MASK_IN1)
+		return IRQ_IN1;
+
+	if (mask & IRQ_MASK_IN2)
+		return IRQ_IN2;
+
+	if (mask & IRQ_MASK_IN3)
+		return IRQ_IN3;
+
+	if (mask & IRQ_MASK_PCI)
+		return IRQ_PCI;
+
+	if (mask & IRQ_MASK_DOORBELLHOST)
+		return IRQ_DOORBELLHOST;
+
+	if (mask & IRQ_MASK_I2OINPOST)
+		return IRQ_I2OINPOST;
+
+	if (mask & IRQ_MASK_TIMER1)
+		return IRQ_TIMER1;
+
+	if (mask & IRQ_MASK_TIMER2)
+		return IRQ_TIMER2;
+
+	if (mask & IRQ_MASK_TIMER3)
+		return IRQ_TIMER3;
+
+	if (mask & IRQ_MASK_UART_TX)
+		return IRQ_CONTX;
+
+	if (mask & IRQ_MASK_PCI_ABORT)
+		return IRQ_PCI_ABORT;
+
+	if (mask & IRQ_MASK_PCI_SERR)
+		return IRQ_PCI_SERR;
+
+	if (mask & IRQ_MASK_DISCARD_TIMER)
+		return IRQ_DISCARD_TIMER;
+
+	if (mask & IRQ_MASK_PCI_DPERR)
+		return IRQ_PCI_DPERR;
+
+	if (mask & IRQ_MASK_PCI_PERR)
+		return IRQ_PCI_PERR;
+
+	return 0;
+}
+
+static void dc21285_handle_irq(struct pt_regs *regs)
+{
+	int irq;
+	do {
+		irq = dc21285_get_irq();
+		if (!irq)
+			break;
+
+		generic_handle_irq(irq);
+	} while (1);
+}
+
+
 unsigned int mem_fclk_21285 = 50000000;
 
 EXPORT_SYMBOL(mem_fclk_21285);
@@ -108,10 +194,9 @@ static void __init __fb_init_irq(void)
 
 void __init footbridge_init_irq(void)
 {
-	__fb_init_irq();
+	set_handle_irq(dc21285_handle_irq);
 
-	if (!footbridge_cfn_mode())
-		return;
+	__fb_init_irq();
 
 	if (machine_is_ebsa285())
 		/* The following is dependent on which slot
@@ -121,9 +206,6 @@ void __init footbridge_init_irq(void)
 		 */
 		isa_init_irq(IRQ_PCI);
 
-	if (machine_is_cats())
-		isa_init_irq(IRQ_IN2);
-
 	if (machine_is_netwinder())
 		isa_init_irq(IRQ_IN3);
 }
@@ -133,21 +215,13 @@ void __init footbridge_init_irq(void)
  * commented out since there is a "No Fix" problem with it.  Not mapping
  * it means that we have extra bullet protection on our feet.
  */
-static struct map_desc fb_common_io_desc[] __initdata = {
+static struct map_desc ebsa285_host_io_desc[] __initdata = {
 	{
 		.virtual	= ARMCSR_BASE,
 		.pfn		= __phys_to_pfn(DC21285_ARMCSR_BASE),
 		.length		= ARMCSR_SIZE,
 		.type		= MT_DEVICE,
-	}
-};
-
-/*
- * The mapping when the footbridge is in host mode.  We don't map any of
- * this when we are in add-in mode.
- */
-static struct map_desc ebsa285_host_io_desc[] __initdata = {
-#if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST)
+	},
 	{
 		.virtual	= PCIMEM_BASE,
 		.pfn		= __phys_to_pfn(DC21285_PCI_MEM),
@@ -169,26 +243,12 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = {
 		.length		= PCIIACK_SIZE,
 		.type		= MT_DEVICE,
 	},
-#endif
 };
 
 void __init footbridge_map_io(void)
 {
-	/*
-	 * Set up the common mapping first; we need this to
-	 * determine whether we're in host mode or not.
-	 */
-	iotable_init(fb_common_io_desc, ARRAY_SIZE(fb_common_io_desc));
-
-	/*
-	 * Now, work out what we've got to map in addition on this
-	 * platform.
-	 */
-	if (footbridge_cfn_mode()) {
-		iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
-		pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
-	}
-
+	iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
+	pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
 	vga_base = PCIMEM_BASE;
 }
 
@@ -218,47 +278,3 @@ void footbridge_restart(enum reboot_mode mode, const char *cmd)
 		*CSR_SA110_CNTL |= (1 << 13);
 	}
 }
-
-#ifdef CONFIG_FOOTBRIDGE_ADDIN
-
-static inline unsigned long fb_bus_sdram_offset(void)
-{
-	return *CSR_PCISDRAMBASE & 0xfffffff0;
-}
-
-/*
- * These two functions convert virtual addresses to PCI addresses and PCI
- * addresses to virtual addresses.  Note that it is only legal to use these
- * on memory obtained via get_zeroed_page or kmalloc.
- */
-unsigned long __virt_to_bus(unsigned long res)
-{
-	WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
-
-	return res + (fb_bus_sdram_offset() - PAGE_OFFSET);
-}
-EXPORT_SYMBOL(__virt_to_bus);
-
-unsigned long __bus_to_virt(unsigned long res)
-{
-	res = res - (fb_bus_sdram_offset() - PAGE_OFFSET);
-
-	WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
-
-	return res;
-}
-EXPORT_SYMBOL(__bus_to_virt);
-
-unsigned long __pfn_to_bus(unsigned long pfn)
-{
-	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET);
-}
-EXPORT_SYMBOL(__pfn_to_bus);
-
-unsigned long __bus_to_pfn(unsigned long bus)
-{
-	return __phys_to_pfn(bus - (fb_bus_sdram_offset() - PHYS_OFFSET));
-}
-EXPORT_SYMBOL(__bus_to_pfn);
-
-#endif
diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c
index f9713dc561cf..f8920d0010de 100644
--- a/arch/arm/mach-footbridge/dc21285.c
+++ b/arch/arm/mach-footbridge/dc21285.c
@@ -5,6 +5,7 @@
  *  Copyright (C) 1998-2001 Russell King
  *  Copyright (C) 1998-2000 Phil Blundell
  */
+#include <linux/dma-map-ops.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
@@ -241,13 +242,26 @@ static irqreturn_t dc21285_parity_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int dc21285_pci_bus_notifier(struct notifier_block *nb,
+				    unsigned long action,
+				    void *data)
+{
+	if (action != BUS_NOTIFY_ADD_DEVICE)
+		return NOTIFY_DONE;
+
+	dma_direct_set_offset(data, PHYS_OFFSET, BUS_OFFSET, SZ_256M);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block dc21285_pci_bus_nb = {
+	.notifier_call = dc21285_pci_bus_notifier,
+};
+
 int __init dc21285_setup(int nr, struct pci_sys_data *sys)
 {
 	struct resource *res;
 
-	if (nr || !footbridge_cfn_mode())
-		return 0;
-
 	res = kcalloc(2, sizeof(struct resource), GFP_KERNEL);
 	if (!res) {
 		printk("out of memory for root bus resources");
@@ -269,6 +283,8 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
 	pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset);
 	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
 
+	bus_register_notifier(&pci_bus_type, &dc21285_pci_bus_nb);
+
 	return 1;
 }
 
@@ -278,7 +294,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys)
 void __init dc21285_preinit(void)
 {
 	unsigned int mem_size, mem_mask;
-	int cfn_mode;
 
 	pcibios_min_mem = 0x81000000;
 
@@ -298,21 +313,15 @@ void __init dc21285_preinit(void)
 	*CSR_CSRBASEOFFSET    = 0;
 	*CSR_PCIADDR_EXTN     = 0;
 
-	cfn_mode = __footbridge_cfn_mode();
-
 	printk(KERN_INFO "PCI: DC21285 footbridge, revision %02lX, in "
-		"%s mode\n", *CSR_CLASSREV & 0xff, cfn_mode ?
-		"central function" : "addin");
-
-	if (footbridge_cfn_mode()) {
-		/*
-		 * Clear any existing errors - we aren't
-		 * interested in historical data...
-		 */
-		*CSR_SA110_CNTL	= (*CSR_SA110_CNTL & 0xffffde07) |
-				  SA110_CNTL_RXSERR;
-		*CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS;
-	}
+		"central function mode\n", *CSR_CLASSREV & 0xff);
+
+	/*
+	 * Clear any existing errors - we aren't
+	 * interested in historical data...
+	 */
+	*CSR_SA110_CNTL	= (*CSR_SA110_CNTL & 0xffffde07) | SA110_CNTL_RXSERR;
+	*CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS;
 
 	timer_setup(&serr_timer, dc21285_enable_error, 0);
 	timer_setup(&perr_timer, dc21285_enable_error, 0);
@@ -331,29 +340,18 @@ void __init dc21285_preinit(void)
 	dc21285_request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, 0,
 			    "PCI data parity", NULL);
 
-	if (cfn_mode) {
-		/*
-		 * Map our SDRAM at a known address in PCI space, just in case
-		 * the firmware had other ideas.  Using a nonzero base is
-		 * necessary, since some VGA cards forcefully use PCI addresses
-		 * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards).
-		 */
-		*CSR_PCICSRBASE       = 0xf4000000;
-		*CSR_PCICSRIOBASE     = 0;
-		*CSR_PCISDRAMBASE     = __virt_to_bus(PAGE_OFFSET);
-		*CSR_PCIROMBASE       = 0;
-		*CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
-			      PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS;
-	} else if (footbridge_cfn_mode() != 0) {
-		/*
-		 * If we are not compiled to accept "add-in" mode, then
-		 * we are using a constant virt_to_bus translation which
-		 * can not hope to cater for the way the host BIOS  has
-		 * set up the machine.
-		 */
-		panic("PCI: this kernel is compiled for central "
-			"function mode only");
-	}
+	/*
+	 * Map our SDRAM at a known address in PCI space, just in case
+	 * the firmware had other ideas.  Using a nonzero base is
+	 * necessary, since some VGA cards forcefully use PCI addresses
+	 * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards).
+	 */
+	*CSR_PCICSRBASE       = 0xf4000000;
+	*CSR_PCICSRIOBASE     = 0;
+	*CSR_PCISDRAMBASE     = BUS_OFFSET;
+	*CSR_PCIROMBASE       = 0;
+	*CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+		      PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS;
 }
 
 void __init dc21285_postinit(void)
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/mach-footbridge/dma-isa.c
index 2d90ecce5a11..937f5376d5e7 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/mach-footbridge/dma-isa.c
@@ -1,7 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- *  linux/arch/arm/kernel/dma-isa.c
- *
  *  Copyright (C) 1999-2000 Russell King
  *
  *  ISA DMA primitives
@@ -13,6 +11,7 @@
  *   arch/arm/kernel/dma-ebsa285.c
  *   Copyright (C) 1998 Phil Blundell
  */
+#include <linux/dma-map-ops.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
@@ -20,6 +19,7 @@
 
 #include <asm/dma.h>
 #include <asm/mach/dma.h>
+#include <asm/hardware/dec21285.h>
 
 #define ISA_DMA_MASK		0
 #define ISA_DMA_MODE		1
@@ -157,7 +157,7 @@ static dma_t isa_dma[8];
 /*
  * ISA DMA always starts at channel 0
  */
-void __init isa_init_dma(void)
+static int __init isa_dma_init(void)
 {
 	/*
 	 * Try to autodetect presence of an ISA DMA controller.
@@ -222,4 +222,9 @@ void __init isa_init_dma(void)
 
 		request_dma(DMA_ISA_CASCADE, "cascade");
 	}
+
+	dma_direct_set_offset(&isa_dma_dev, PHYS_OFFSET, BUS_OFFSET, SZ_256M);
+
+	return 0;
 }
+core_initcall(isa_dma_init);
diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c
deleted file mode 100644
index 86618074a7a5..000000000000
--- a/arch/arm/mach-footbridge/dma.c
+++ /dev/null
@@ -1,58 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *  linux/arch/arm/kernel/dma-ebsa285.c
- *
- *  Copyright (C) 1998 Phil Blundell
- *
- * DMA functions specific to EBSA-285/CATS architectures
- *
- *  Changelog:
- *   09-Nov-1998 RMK	Split out ISA DMA functions to dma-isa.c
- *   17-Mar-1999 RMK	Allow any EBSA285-like architecture to have
- *			ISA DMA controllers.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/scatterlist.h>
-
-#include <asm/dma.h>
-
-#include <asm/mach/dma.h>
-#include <asm/hardware/dec21285.h>
-
-#if 0
-static int fb_dma_request(unsigned int chan, dma_t *dma)
-{
-	return -EINVAL;
-}
-
-static void fb_dma_enable(unsigned int chan, dma_t *dma)
-{
-}
-
-static void fb_dma_disable(unsigned int chan, dma_t *dma)
-{
-}
-
-static struct dma_ops fb_dma_ops = {
-	.type		= "fb",
-	.request	= fb_dma_request,
-	.enable		= fb_dma_enable,
-	.disable	= fb_dma_disable,
-};
-#endif
-
-static int __init fb_dma_init(void)
-{
-#if 0
-	dma[_DC21285_DMA(0)].d_ops = &fb_dma_ops;
-	dma[_DC21285_DMA(1)].d_ops = &fb_dma_ops;
-#endif
-#ifdef CONFIG_ISA_DMA
-	if (footbridge_cfn_mode())
-		isa_init_dma();
-#endif
-	return 0;
-}
-core_initcall(fb_dma_init);
diff --git a/arch/arm/mach-footbridge/ebsa285-pci.c b/arch/arm/mach-footbridge/ebsa285-pci.c
index 6f28aaa9ca79..c3f280d08fa7 100644
--- a/arch/arm/mach-footbridge/ebsa285-pci.c
+++ b/arch/arm/mach-footbridge/ebsa285-pci.c
@@ -14,9 +14,9 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
-static int irqmap_ebsa285[] __initdata = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI };
+static int irqmap_ebsa285[] = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI };
 
-static int __init ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (dev->vendor == PCI_VENDOR_ID_CONTAQ &&
 	    dev->device == PCI_DEVICE_ID_CONTAQ_82C693)
diff --git a/arch/arm/mach-footbridge/include/mach/entry-macro.S b/arch/arm/mach-footbridge/include/mach/entry-macro.S
deleted file mode 100644
index dabbd5c54a78..000000000000
--- a/arch/arm/mach-footbridge/include/mach/entry-macro.S
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * arch/arm/mach-footbridge/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for footbridge-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/hardware/dec21285.h>
-
-		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
-		.equ	dc21285_low, ARMCSR_BASE & 0x00ffffff
-
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #dc21285_high
-		.if	dc21285_low
-		orr	\base, \base, #dc21285_low
-		.endif
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #0x180]	@ get interrupts
-
-		mov	\irqnr, #IRQ_SDRAMPARITY
-		tst	\irqstat, #IRQ_MASK_SDRAMPARITY
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_UART_RX
-		movne	\irqnr, #IRQ_CONRX
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DMA1
-		movne	\irqnr, #IRQ_DMA1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DMA2
-		movne	\irqnr, #IRQ_DMA2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN0
-		movne	\irqnr, #IRQ_IN0
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN1
-		movne	\irqnr, #IRQ_IN1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN2
-		movne	\irqnr, #IRQ_IN2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN3
-		movne	\irqnr, #IRQ_IN3
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI
-		movne	\irqnr, #IRQ_PCI
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DOORBELLHOST
-		movne	\irqnr, #IRQ_DOORBELLHOST
-		bne     1001f
-
-		tst	\irqstat, #IRQ_MASK_I2OINPOST
-		movne	\irqnr, #IRQ_I2OINPOST
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER1
-		movne	\irqnr, #IRQ_TIMER1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER2
-		movne	\irqnr, #IRQ_TIMER2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER3
-		movne	\irqnr, #IRQ_TIMER3
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_UART_TX
-		movne	\irqnr, #IRQ_CONTX
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_ABORT
-		movne	\irqnr, #IRQ_PCI_ABORT
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_SERR
-		movne	\irqnr, #IRQ_PCI_SERR
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DISCARD_TIMER
-		movne	\irqnr, #IRQ_DISCARD_TIMER
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_DPERR
-		movne	\irqnr, #IRQ_PCI_DPERR
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_PERR
-		movne	\irqnr, #IRQ_PCI_PERR
-1001:
-		.endm
-
diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h
index ecaf6e7388d9..985ad3a95671 100644
--- a/arch/arm/mach-footbridge/include/mach/hardware.h
+++ b/arch/arm/mach-footbridge/include/mach/hardware.h
@@ -21,32 +21,26 @@
  * 0xf0000000	0x80000000	16MB	ISA memory
  */
 
-#ifdef CONFIG_MMU
-#define MMU_IO(a, b)	(a)
-#else
-#define MMU_IO(a, b)	(b)
-#endif
-
 #define XBUS_SIZE		0x00100000
-#define XBUS_BASE		MMU_IO(0xff800000, 0x40000000)
+#define XBUS_BASE		0xff800000
 
 #define ARMCSR_SIZE		0x00100000
-#define ARMCSR_BASE		MMU_IO(0xfe000000, 0x42000000)
+#define ARMCSR_BASE		0xfe000000
 
 #define WFLUSH_SIZE		0x00100000
-#define WFLUSH_BASE		MMU_IO(0xfd000000, 0x78000000)
+#define WFLUSH_BASE		0xfd000000
 
 #define PCIIACK_SIZE		0x00100000
-#define PCIIACK_BASE		MMU_IO(0xfc000000, 0x79000000)
+#define PCIIACK_BASE		0xfc000000
 
 #define PCICFG1_SIZE		0x01000000
-#define PCICFG1_BASE		MMU_IO(0xfb000000, 0x7a000000)
+#define PCICFG1_BASE		0xfb000000
 
 #define PCICFG0_SIZE		0x01000000
-#define PCICFG0_BASE		MMU_IO(0xfa000000, 0x7b000000)
+#define PCICFG0_BASE		0xfa000000
 
 #define PCIMEM_SIZE		0x01000000
-#define PCIMEM_BASE		MMU_IO(0xf0000000, 0x80000000)
+#define PCIMEM_BASE		0xf0000000
 
 #define XBUS_CS2		0x40012000
 
diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h
deleted file mode 100644
index 4e18b921373f..000000000000
--- a/arch/arm/mach-footbridge/include/mach/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-footbridge/include/mach/io.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *
- *  Modifications:
- *   06-12-1997	RMK	Created.
- *   07-04-1999	RMK	Major cleanup
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/*
- * Translation of various i/o addresses to host addresses for !CONFIG_MMU
- */
-#define PCIO_BASE       0x7c000000
-#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
-
-#endif
diff --git a/arch/arm/mach-footbridge/include/mach/isa-dma.h b/arch/arm/mach-footbridge/include/mach/isa-dma.h
index 8a1b991076e1..b10731a1f66a 100644
--- a/arch/arm/mach-footbridge/include/mach/isa-dma.h
+++ b/arch/arm/mach-footbridge/include/mach/isa-dma.h
@@ -10,17 +10,9 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
-/*
- * The 21285 has two internal DMA channels; we call these 8 and 9.
- * On CATS hardware we have an additional eight ISA dma channels
- * numbered 0..7.
- */
-#define _ISA_DMA(x)		(0+(x))
-#define _DC21285_DMA(x)		(8+(x))
-
-#define MAX_DMA_CHANNELS	10
+#define MAX_DMA_CHANNELS	8
 
-#define DMA_FLOPPY		_ISA_DMA(2)
-#define DMA_ISA_CASCADE		_ISA_DMA(4)
+#define DMA_FLOPPY		(2)
+#define DMA_ISA_CASCADE		(4)
 
 #endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
index 46fd4a8872b9..9516877667d7 100644
--- a/arch/arm/mach-footbridge/include/mach/memory.h
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -16,41 +16,6 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
-
-#if defined(CONFIG_FOOTBRIDGE_ADDIN)
-/*
- * If we may be using add-in footbridge mode, then we must
- * use the out-of-line translation that makes use of the
- * PCI BAR
- */
-#ifndef __ASSEMBLY__
-extern unsigned long __virt_to_bus(unsigned long);
-extern unsigned long __bus_to_virt(unsigned long);
-extern unsigned long __pfn_to_bus(unsigned long);
-extern unsigned long __bus_to_pfn(unsigned long);
-#endif
-#define __virt_to_bus	__virt_to_bus
-#define __bus_to_virt	__bus_to_virt
-
-#elif defined(CONFIG_FOOTBRIDGE_HOST)
-
-/*
- * The footbridge is programmed to expose the system RAM at 0xe0000000.
- * The requirement is that the RAM isn't placed at bus address 0, which
- * would clash with VGA cards.
- */
-#define BUS_OFFSET		0xe0000000
-#define __virt_to_bus(x)	((x) + (BUS_OFFSET - PAGE_OFFSET))
-#define __bus_to_virt(x)	((x) - (BUS_OFFSET - PAGE_OFFSET))
-#define __pfn_to_bus(x)		(__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET))
-#define __bus_to_pfn(x)		__phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET))
-
-#else
-
-#error "Undefined footbridge mode"
-
-#endif
-
 /*
  * Cache flushing area.
  */
diff --git a/arch/arm/mach-footbridge/isa-rtc.c b/arch/arm/mach-footbridge/isa-rtc.c
index b8f741a3a37e..237b828dd2f1 100644
--- a/arch/arm/mach-footbridge/isa-rtc.c
+++ b/arch/arm/mach-footbridge/isa-rtc.c
@@ -20,7 +20,6 @@
 
 #include <linux/init.h>
 #include <linux/mc146818rtc.h>
-#include <linux/bcd.h>
 #include <linux/io.h>
 
 #include "common.h"
diff --git a/arch/arm/mach-footbridge/isa.c b/arch/arm/mach-footbridge/isa.c
index ec5af521cf95..84caccddce44 100644
--- a/arch/arm/mach-footbridge/isa.c
+++ b/arch/arm/mach-footbridge/isa.c
@@ -79,16 +79,12 @@ static int __init footbridge_isa_init(void)
 {
 	int err = 0;
 
-	if (!footbridge_cfn_mode())
-		return 0;
-
 	/* Personal server doesn't have RTC */
-	if (!machine_is_personal_server()) {
-		isa_rtc_init();
-		err = platform_device_register(&rtc_device);
-		if (err)
-			printk(KERN_ERR "Unable to register RTC device: %d\n", err);
-	}
+	isa_rtc_init();
+	err = platform_device_register(&rtc_device);
+	if (err)
+		printk(KERN_ERR "Unable to register RTC device: %d\n", err);
+
 	err = platform_device_register(&serial_device);
 	if (err)
 		printk(KERN_ERR "Unable to register serial device: %d\n", err);
diff --git a/arch/arm/mach-footbridge/netwinder-pci.c b/arch/arm/mach-footbridge/netwinder-pci.c
index 9473aa0305e5..e8304392074b 100644
--- a/arch/arm/mach-footbridge/netwinder-pci.c
+++ b/arch/arm/mach-footbridge/netwinder-pci.c
@@ -18,7 +18,7 @@
  * We now use the slot ID instead of the device identifiers to select
  * which interrupt is routed where.
  */
-static int __init netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	switch (slot) {
 	case 0:  /* host bridge */
diff --git a/arch/arm/mach-footbridge/personal-pci.c b/arch/arm/mach-footbridge/personal-pci.c
deleted file mode 100644
index 4391e433a4b2..000000000000
--- a/arch/arm/mach-footbridge/personal-pci.c
+++ /dev/null
@@ -1,58 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-footbridge/personal-pci.c
- *
- * PCI bios-type initialisation for PCI machines
- *
- * Bits taken from various places.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-static int irqmap_personal_server[] __initdata = {
-	IRQ_IN0, IRQ_IN1, IRQ_IN2, IRQ_IN3, 0, 0, 0,
-	IRQ_DOORBELLHOST, IRQ_DMA1, IRQ_DMA2, IRQ_PCI
-};
-
-static int __init personal_server_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	unsigned char line;
-
-	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
-
-	if (line > 0x40 && line <= 0x5f) {
-		/* line corresponds to the bit controlling this interrupt
-		 * in the footbridge.  Ignore the first 8 interrupt bits,
-		 * look up the rest in the map.  IN0 is bit number 8
-		 */
-		return irqmap_personal_server[(line & 0x1f) - 8];
-	} else if (line == 0) {
-		/* no interrupt */
-		return 0;
-	} else
-		return irqmap_personal_server[(line - 1) & 3];
-}
-
-static struct hw_pci personal_server_pci __initdata = {
-	.map_irq		= personal_server_map_irq,
-	.nr_controllers		= 1,
-	.ops			= &dc21285_ops,
-	.setup			= dc21285_setup,
-	.preinit		= dc21285_preinit,
-	.postinit		= dc21285_postinit,
-};
-
-static int __init personal_pci_init(void)
-{
-	if (machine_is_personal_server())
-		pci_common_init(&personal_server_pci);
-	return 0;
-}
-
-subsys_initcall(personal_pci_init);
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
deleted file mode 100644
index ca715754fc00..000000000000
--- a/arch/arm/mach-footbridge/personal.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-footbridge/personal.c
- *
- * Personal server (Skiff) machine fixup
- */
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <asm/hardware/dec21285.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
-	/* Maintainer: Jamey Hicks / George France */
-	.atag_offset	= 0x100,
-	.map_io		= footbridge_map_io,
-	.init_irq	= footbridge_init_irq,
-	.init_time	= footbridge_timer_init,
-	.restart	= footbridge_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig
index 969674ea5f17..f436a2009eca 100644
--- a/arch/arm/mach-gemini/Kconfig
+++ b/arch/arm/mach-gemini/Kconfig
@@ -2,6 +2,7 @@
 menuconfig ARCH_GEMINI
 	bool "Cortina Systems Gemini"
 	depends on ARCH_MULTI_V4
+	depends on CPU_LITTLE_ENDIAN
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_AMBA
 	select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
diff --git a/arch/arm/mach-gemini/board-dt.c b/arch/arm/mach-gemini/board-dt.c
index de0afcc8d94a..fbafe7475c02 100644
--- a/arch/arm/mach-gemini/board-dt.c
+++ b/arch/arm/mach-gemini/board-dt.c
@@ -42,8 +42,9 @@ static void gemini_idle(void)
 	 */
 
 	/* FIXME: Enabling interrupts here is racy! */
-	local_irq_enable();
+	raw_local_irq_enable();
 	cpu_do_idle();
+	raw_local_irq_disable();
 }
 
 static void __init gemini_init_machine(void)
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 9de38ce8124f..c2d6ef6b3927 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -2,7 +2,6 @@
 config ARCH_HIGHBANK
 	bool "Calxeda ECX-1000/2000 (Highbank/Midway)"
 	depends on ARCH_MULTI_V7
-	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index db607955a7e4..5d4f977ac7d2 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -98,7 +98,7 @@ static int highbank_platform_notifier(struct notifier_block *nb,
 	if (of_property_read_bool(dev->of_node, "dma-coherent")) {
 		val = readl(sregs_base + reg);
 		writel(val | 0xff01, sregs_base + reg);
-		set_dma_ops(dev, &arm_coherent_dma_ops);
+		dev->dma_coherent = true;
 	}
 
 	return NOTIFY_OK;
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index 2e980f834a6a..7b3440687176 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config ARCH_HISI
 	bool "Hisilicon SoC Support"
-	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
+	depends on ARCH_MULTI_V7 || (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN)
 	select ARM_AMBA
 	select ARM_GIC if ARCH_MULTI_V7
 	select ARM_TIMER_SP804
@@ -40,7 +40,7 @@ config ARCH_HIP04
 	select HAVE_ARM_ARCH_TIMER
 	select MCPM if SMP
 	select MCPM_QUAD_CLUSTER if SMP
-	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
+	select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
 	help
 	  Support for Hisilicon HiP04 SoC family
 
diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c
index 07ea28b99cd0..b8d14b369cc9 100644
--- a/arch/arm/mach-hisi/hisilicon.c
+++ b/arch/arm/mach-hisi/hisilicon.c
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * (Hisilicon's SoC based) flattened device tree enabled machine
+ * (HiSilicon's SoC based) flattened device tree enabled machine
  *
- * Copyright (c) 2012-2013 Hisilicon Ltd.
+ * Copyright (c) 2012-2013 HiSilicon Ltd.
  * Copyright (c) 2012-2013 Linaro Ltd.
  *
  * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c
index 5c5f255abc3a..c517941416f1 100644
--- a/arch/arm/mach-hisi/hotplug.c
+++ b/arch/arm/mach-hisi/hotplug.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2013 Linaro Ltd.
- * Copyright (c) 2013 Hisilicon Limited.
+ * Copyright (c) 2013 HiSilicon Limited.
  */
 
 #include <linux/cpu.h>
diff --git a/arch/arm/mach-hisi/platmcpm.c b/arch/arm/mach-hisi/platmcpm.c
index f155e32f8420..258586e31333 100644
--- a/arch/arm/mach-hisi/platmcpm.c
+++ b/arch/arm/mach-hisi/platmcpm.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 Hisilicon Limited.
+ * Copyright (c) 2013-2014 HiSilicon Limited.
  */
 #include <linux/init.h>
 #include <linux/smp.h>
@@ -339,7 +339,7 @@ err_fabric:
 err_sysctrl:
 	iounmap(relocation);
 err_reloc:
-	memblock_free(hip04_boot_method[0], hip04_boot_method[1]);
+	memblock_phys_free(hip04_boot_method[0], hip04_boot_method[1]);
 err:
 	return ret;
 }
diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c
index da7a09c1dae5..9ce93e0b6cdc 100644
--- a/arch/arm/mach-hisi/platsmp.c
+++ b/arch/arm/mach-hisi/platsmp.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2013 Linaro Ltd.
- * Copyright (c) 2013 Hisilicon Limited.
+ * Copyright (c) 2013 HiSilicon Limited.
  * Based on arch/arm/mach-vexpress/platsmp.c, Copyright (C) 2002 ARM Ltd.
  */
 #include <linux/smp.h>
@@ -67,14 +67,17 @@ static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus)
 		}
 		ctrl_base = of_iomap(np, 0);
 		if (!ctrl_base) {
+			of_node_put(np);
 			pr_err("failed to map address\n");
 			return;
 		}
 		if (of_property_read_u32(np, "smp-offset", &offset) < 0) {
+			of_node_put(np);
 			pr_err("failed to find smp-offset property\n");
 			return;
 		}
 		ctrl_base += offset;
+		of_node_put(np);
 	}
 }
 
@@ -160,6 +163,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	if (WARN_ON(!node))
 		return -1;
 	ctrl_base = of_iomap(node, 0);
+	of_node_put(node);
 
 	/* set the secondary core boot from DDR */
 	remap_reg_value = readl_relaxed(ctrl_base + REG_SC_CTRL);
diff --git a/arch/arm/mach-hpe/Kconfig b/arch/arm/mach-hpe/Kconfig
new file mode 100644
index 000000000000..3372bbf38d38
--- /dev/null
+++ b/arch/arm/mach-hpe/Kconfig
@@ -0,0 +1,23 @@
+menuconfig ARCH_HPE
+	bool "HPE SoC support"
+	depends on ARCH_MULTI_V7
+	help
+	  This enables support for HPE ARM based BMC chips.
+if ARCH_HPE
+
+config ARCH_HPE_GXP
+	bool "HPE GXP SoC"
+	depends on ARCH_MULTI_V7
+	select ARM_VIC
+	select GENERIC_IRQ_CHIP
+	select CLKSRC_MMIO
+	help
+	  HPE GXP is the name of the HPE Soc. This SoC is used to implement many
+	  BMC features at HPE. It supports ARMv7 architecture based on the Cortex
+	  A9 core. It is capable of using an AXI bus to which a memory controller
+	  is attached. It has multiple SPI interfaces to connect boot flash and
+	  BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It
+	  has multiple i2c engines to drive connectivity with a host
+	  infrastructure.
+
+endif
diff --git a/arch/arm/mach-hpe/Makefile b/arch/arm/mach-hpe/Makefile
new file mode 100644
index 000000000000..8b0a91234df4
--- /dev/null
+++ b/arch/arm/mach-hpe/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ARCH_HPE_GXP) += gxp.o
diff --git a/arch/arm/mach-hpe/gxp.c b/arch/arm/mach-hpe/gxp.c
new file mode 100644
index 000000000000..ef3341373006
--- /dev/null
+++ b/arch/arm/mach-hpe/gxp.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
+
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+
+static const char * const gxp_board_dt_compat[] = {
+	"hpe,gxp",
+	NULL,
+};
+
+DT_MACHINE_START(GXP_DT, "HPE GXP")
+	.dt_compat	= gxp_board_dt_compat,
+	.l2c_aux_val = 0,
+	.l2c_aux_mask = ~0,
+MACHINE_END
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 52902782cc5f..ab767f059929 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_MXC
 	bool "Freescale i.MX family"
-	depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
-	select ARCH_SUPPORTS_BIG_ENDIAN
+	depends on ((ARCH_MULTI_V4T || ARCH_MULTI_V5) && CPU_LITTLE_ENDIAN) || \
+		ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
 	select CLKSRC_IMX_GPT
 	select GENERIC_IRQ_CHIP
 	select GPIOLIB
@@ -21,18 +21,6 @@ config MXC_TZIC
 config MXC_AVIC
 	bool
 
-config MXC_DEBUG_BOARD
-	bool "Enable MXC debug board(for 3-stack)"
-	depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS
-	help
-	  The debug board is an integral part of the MXC 3-stack(PDK)
-	  platforms, it can be attached or removed from the peripheral
-	  board. On debug board, several debug devices(ethernet, UART,
-	  buttons, LEDs and JTAG) are implemented. Between the MCU and
-	  these devices, a CPLD is added as a bridge which performs
-	  data/address de-multiplexing and decode, signal level shift,
-	  interrupt control and various board functions.
-
 config HAVE_IMX_ANATOP
 	bool
 
@@ -63,7 +51,7 @@ config SOC_IMX35
 	select MXC_AVIC
 	select PINCTRL_IMX35
 	help
-	  This enables support for Freescale i.MX31 processor
+	  This enables support for Freescale i.MX35 processor
 
 endif
 
@@ -108,7 +96,7 @@ config SOC_IMX5
 	select HAVE_IMX_SRC
 	select MXC_TZIC
 
-config	SOC_IMX50
+config SOC_IMX50
 	bool "i.MX50 support"
 	select PINCTRL_IMX50
 	select SOC_IMX5
@@ -123,7 +111,7 @@ config SOC_IMX51
 	help
 	  This enables support for Freescale i.MX51 processor
 
-config	SOC_IMX53
+config SOC_IMX53
 	bool "i.MX53 support"
 	select PINCTRL_IMX53
 	select SOC_IMX5
@@ -228,7 +216,7 @@ config SOC_IMX7D
 	select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M
 	select ARM_ERRATA_814220 if ARCH_MULTI_V7
 	help
-		This enables support for Freescale i.MX7 Dual processor.
+	  This enables support for Freescale i.MX7 Dual processor.
 
 config SOC_IMX7ULP
 	bool "i.MX7ULP support"
@@ -239,6 +227,13 @@ config SOC_IMX7ULP
 	help
 	  This enables support for Freescale i.MX7 Ultra Low Power processor.
 
+config SOC_IMXRT
+	bool "i.MXRT support"
+	depends on ARM_SINGLE_ARMV7M
+	select ARMV7M_SYSTICK if ARM_SINGLE_ARMV7M
+	help
+	  This enables support for Freescale i.MXRT Crossover processor.
+
 config SOC_VF610
 	bool "Vybrid Family VF610 support"
 	select ARM_GIC if ARCH_MULTI_V7
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 9cebd360d58e..5c650bf40e02 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -14,8 +14,6 @@ obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y)
 obj-$(CONFIG_MXC_TZIC) += tzic.o
 obj-$(CONFIG_MXC_AVIC) += avic.o
 
-obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
-
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
 obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
@@ -35,8 +33,7 @@ obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
-ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_LS1021A),)
-AFLAGS_headsmp.o :=-Wa,-march=armv7-a
+ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_IMX7D_CA7)$(CONFIG_SOC_LS1021A),)
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 endif
@@ -50,12 +47,10 @@ obj-$(CONFIG_SOC_IMX7D_CM4) += mach-imx7d-cm4.o
 obj-$(CONFIG_SOC_IMX7ULP) += mach-imx7ulp.o pm-imx7ulp.o
 
 ifeq ($(CONFIG_SUSPEND),y)
-AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
 obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
 endif
 ifeq ($(CONFIG_ARM_CPU_SUSPEND),y)
-AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SOC_IMX6) += resume-imx6.o
 endif
 obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
@@ -65,6 +60,8 @@ obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
 obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
 
+obj-$(CONFIG_SOC_IMXRT) += mach-imxrt.o
+
 obj-$(CONFIG_SOC_VF610) += mach-vf610.o
 
 obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/arch/arm/mach-imx/Makefile.boot
+++ /dev/null
diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c
index 322caa21bcb3..cf6546ddc7a3 100644
--- a/arch/arm/mach-imx/avic.c
+++ b/arch/arm/mach-imx/avic.c
@@ -7,6 +7,7 @@
 #include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -153,7 +154,7 @@ static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
 		if (nivector == 0xffff)
 			break;
 
-		handle_domain_irq(domain, nivector, regs);
+		generic_handle_domain_irq(domain, nivector);
 	} while (1);
 }
 
@@ -162,7 +163,7 @@ static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
  * interrupts. It registers the interrupt enable and disable functions
  * to the kernel for each interrupt source.
  */
-void __init mxc_init_irq(void __iomem *irqbase)
+static void __init mxc_init_irq(void __iomem *irqbase)
 {
 	struct device_node *np;
 	int irq_base;
@@ -220,3 +221,16 @@ void __init mxc_init_irq(void __iomem *irqbase)
 
 	printk(KERN_INFO "MXC IRQ initialized\n");
 }
+
+static int __init imx_avic_init(struct device_node *node,
+			       struct device_node *parent)
+{
+	void __iomem *avic_base;
+
+	avic_base = of_iomap(node, 0);
+	BUG_ON(!avic_base);
+	mxc_init_irq(avic_base);
+	return 0;
+}
+
+IRQCHIP_DECLARE(imx_avic, "fsl,avic", imx_avic_init);
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 2b004cc4f95e..13f3068e9845 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -22,7 +22,6 @@ void mx35_map_io(void);
 void imx21_init_early(void);
 void imx31_init_early(void);
 void imx35_init_early(void);
-void mxc_init_irq(void __iomem *);
 void mx31_init_irq(void);
 void mx35_init_irq(void);
 void mxc_set_cpu_type(unsigned int type);
@@ -74,12 +73,14 @@ static inline void imx_scu_map_io(void) {}
 static inline void imx_smp_prepare(void) {}
 #endif
 void imx_src_init(void);
+void imx7_src_init(void);
 void imx_gpc_pre_suspend(bool arm_power_off);
 void imx_gpc_post_resume(void);
 void imx_gpc_mask_all(void);
 void imx_gpc_restore_all(void);
 void imx_gpc_hwirq_mask(unsigned int hwirq);
 void imx_gpc_hwirq_unmask(unsigned int hwirq);
+void imx_gpcv2_set_core1_pdn_pup_by_software(bool pdn);
 void imx_anatop_init(void);
 void imx_anatop_pre_suspend(void);
 void imx_anatop_post_resume(void);
@@ -132,6 +133,7 @@ static inline void imx_init_l2cache(void) {}
 #endif
 
 extern const struct smp_operations imx_smp_ops;
+extern const struct smp_operations imx7_smp_ops;
 extern const struct smp_operations ls1021a_smp_ops;
 
 #endif
diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c
index b2e1963f473d..cc86977d0a34 100644
--- a/arch/arm/mach-imx/cpu-imx25.c
+++ b/arch/arm/mach-imx/cpu-imx25.c
@@ -23,6 +23,7 @@ static int mx25_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 	rev = readl(iim_base + MXC_IIMSREV);
 	iounmap(iim_base);
@@ -32,6 +33,8 @@ static int mx25_read_cpu_rev(void)
 		return IMX_CHIP_REVISION_1_0;
 	case 0x01:
 		return IMX_CHIP_REVISION_1_1;
+	case 0x02:
+		return IMX_CHIP_REVISION_1_2;
 	default:
 		return IMX_CHIP_REVISION_UNKNOWN;
 	}
diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c
index bf70e13bbe9e..1d2893908368 100644
--- a/arch/arm/mach-imx/cpu-imx27.c
+++ b/arch/arm/mach-imx/cpu-imx27.c
@@ -28,6 +28,7 @@ static int mx27_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
 	ccm_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!ccm_base);
 	/*
 	 * now we have access to the IO registers. As we need
diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c
index b9c24b851d1a..35c544924e50 100644
--- a/arch/arm/mach-imx/cpu-imx31.c
+++ b/arch/arm/mach-imx/cpu-imx31.c
@@ -39,6 +39,7 @@ static int mx31_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx31-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 
 	/* read SREV register from IIM module */
diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c
index 80e7d8ab9f1b..1fe75b39c2d9 100644
--- a/arch/arm/mach-imx/cpu-imx35.c
+++ b/arch/arm/mach-imx/cpu-imx35.c
@@ -21,6 +21,7 @@ static int mx35_read_cpu_rev(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx35-iim");
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!iim_base);
 
 	rev = imx_readl(iim_base + MXC_IIMSREV);
diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c
index ad56263778f9..a67c89bf155d 100644
--- a/arch/arm/mach-imx/cpu-imx5.c
+++ b/arch/arm/mach-imx/cpu-imx5.c
@@ -28,6 +28,7 @@ static u32 imx5_read_srev_reg(const char *compat)
 
 	np = of_find_compatible_node(NULL, NULL, compat);
 	iim_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!iim_base);
 
 	srev = readl(iim_base + IIM_SREV) & 0xff;
diff --git a/arch/arm/mach-imx/cpuidle-imx5.c b/arch/arm/mach-imx/cpuidle-imx5.c
index a8457c4eb99a..5ad9f2f533cd 100644
--- a/arch/arm/mach-imx/cpuidle-imx5.c
+++ b/arch/arm/mach-imx/cpuidle-imx5.c
@@ -8,8 +8,8 @@
 #include <asm/system_misc.h>
 #include "cpuidle.h"
 
-static int imx5_cpuidle_enter(struct cpuidle_device *dev,
-			      struct cpuidle_driver *drv, int index)
+static __cpuidle int imx5_cpuidle_enter(struct cpuidle_device *dev,
+					struct cpuidle_driver *drv, int index)
 {
 	arm_pm_idle();
 	return index;
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index 094337dc1bc7..2b0d3160f993 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  */
 
+#include <linux/context_tracking.h>
 #include <linux/cpuidle.h>
 #include <linux/module.h>
 #include <asm/cpuidle.h>
@@ -16,17 +17,17 @@
 static int num_idle_cpus = 0;
 static DEFINE_RAW_SPINLOCK(cpuidle_lock);
 
-static int imx6q_enter_wait(struct cpuidle_device *dev,
-			    struct cpuidle_driver *drv, int index)
+static __cpuidle int imx6q_enter_wait(struct cpuidle_device *dev,
+				      struct cpuidle_driver *drv, int index)
 {
 	raw_spin_lock(&cpuidle_lock);
 	if (++num_idle_cpus == num_online_cpus())
 		imx6_set_lpm(WAIT_UNCLOCKED);
 	raw_spin_unlock(&cpuidle_lock);
 
-	rcu_idle_enter();
+	ct_cpuidle_enter();
 	cpu_do_idle();
-	rcu_idle_exit();
+	ct_cpuidle_exit();
 
 	raw_spin_lock(&cpuidle_lock);
 	if (num_idle_cpus-- == num_online_cpus())
diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c
index b86ffbeb28e4..b49cd6302dce 100644
--- a/arch/arm/mach-imx/cpuidle-imx6sl.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sl.c
@@ -11,8 +11,8 @@
 #include "common.h"
 #include "cpuidle.h"
 
-static int imx6sl_enter_wait(struct cpuidle_device *dev,
-			    struct cpuidle_driver *drv, int index)
+static __cpuidle int imx6sl_enter_wait(struct cpuidle_device *dev,
+				       struct cpuidle_driver *drv, int index)
 {
 	imx6_set_lpm(WAIT_UNCLOCKED);
 	/*
diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c
index 74ea1720e3d8..83c5cbd3748e 100644
--- a/arch/arm/mach-imx/cpuidle-imx6sx.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
@@ -30,8 +30,8 @@ static int imx6sx_idle_finish(unsigned long val)
 	return 0;
 }
 
-static int imx6sx_enter_wait(struct cpuidle_device *dev,
-			    struct cpuidle_driver *drv, int index)
+static __cpuidle int imx6sx_enter_wait(struct cpuidle_device *dev,
+				       struct cpuidle_driver *drv, int index)
 {
 	imx6_set_lpm(WAIT_UNCLOCKED);
 
@@ -47,7 +47,9 @@ static int imx6sx_enter_wait(struct cpuidle_device *dev,
 		cpu_pm_enter();
 		cpu_cluster_pm_enter();
 
+		ct_cpuidle_enter();
 		cpu_suspend(0, imx6sx_idle_finish);
+		ct_cpuidle_exit();
 
 		cpu_cluster_pm_exit();
 		cpu_pm_exit();
@@ -87,7 +89,8 @@ static struct cpuidle_driver imx6sx_cpuidle_driver = {
 			 */
 			.exit_latency = 300,
 			.target_residency = 500,
-			.flags = CPUIDLE_FLAG_TIMER_STOP,
+			.flags = CPUIDLE_FLAG_TIMER_STOP |
+				 CPUIDLE_FLAG_RCU_IDLE,
 			.enter = imx6sx_enter_wait,
 			.name = "LOW-POWER-IDLE",
 			.desc = "ARM power off",
diff --git a/arch/arm/mach-imx/cpuidle-imx7ulp.c b/arch/arm/mach-imx/cpuidle-imx7ulp.c
index ca86c967d19e..f55ed74acfae 100644
--- a/arch/arm/mach-imx/cpuidle-imx7ulp.c
+++ b/arch/arm/mach-imx/cpuidle-imx7ulp.c
@@ -12,8 +12,8 @@
 #include "common.h"
 #include "cpuidle.h"
 
-static int imx7ulp_enter_wait(struct cpuidle_device *dev,
-			    struct cpuidle_driver *drv, int index)
+static __cpuidle int imx7ulp_enter_wait(struct cpuidle_device *dev,
+					struct cpuidle_driver *drv, int index)
 {
 	if (index == 1)
 		imx7ulp_set_lpm(ULP_PM_WAIT);
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index ebc4339b8be4..5909088d5482 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -275,7 +275,7 @@ void __init imx_gpc_check_dt(void)
 	if (WARN_ON(!np))
 		return;
 
-	if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) {
+	if (WARN_ON(!of_property_read_bool(np, "interrupt-controller"))) {
 		pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
 
 		/* map GPC, so that at least CPUidle and WARs keep working */
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index 766dbdb2ae27..5f9c7b48ae80 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -8,6 +8,8 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 
+.arch armv7-a
+
 diag_reg_offset:
 	.word	g_diag_reg - .
 
@@ -21,6 +23,15 @@ diag_reg_offset:
 
 ENTRY(v7_secondary_startup)
 ARM_BE8(setend be)			@ go BE8 if entered LE
+	mrc	p15, 0, r0, c0, c0, 0
+	lsl	r0, r0, #16
+	lsr	r0, r0, #20
+	/* 0xc07 is cortex A7's ID */
+	mov	r1, #0xc00
+	orr	r1, #0x7
+	cmp	r0, r1
+	beq	secondary_startup
+
 	set_diag_reg
 	b	secondary_startup
 ENDPROC(v7_secondary_startup)
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 82e22398d43d..e24a46dc5703 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -11,6 +11,7 @@
 #include <asm/proc-fns.h>
 
 #include "common.h"
+#include "hardware.h"
 
 /*
  * platform-specific code to shutdown a CPU
@@ -40,5 +41,7 @@ int imx_cpu_kill(unsigned int cpu)
 			return 0;
 	imx_enable_cpu(cpu, false);
 	imx_set_cpu_arg(cpu, 0);
+	if (cpu_is_imx7d())
+		imx_gpcv2_set_core1_pdn_pup_by_software(true);
 	return 1;
 }
diff --git a/arch/arm/mach-imx/mach-imx1.c b/arch/arm/mach-imx/mach-imx1.c
index 32df3b8012f9..8eca92d66a2e 100644
--- a/arch/arm/mach-imx/mach-imx1.c
+++ b/arch/arm/mach-imx/mach-imx1.c
@@ -17,16 +17,6 @@ static void __init imx1_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX1);
 }
 
-static void __init imx1_init_irq(void)
-{
-	void __iomem *avic_addr;
-
-	avic_addr = ioremap(MX1_AVIC_ADDR, SZ_4K);
-	WARN_ON(!avic_addr);
-
-	mxc_init_irq(avic_addr);
-}
-
 static const char * const imx1_dt_board_compat[] __initconst = {
 	"fsl,imx1",
 	NULL
@@ -34,7 +24,6 @@ static const char * const imx1_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)")
 	.init_early	= imx1_init_early,
-	.init_irq	= imx1_init_irq,
 	.dt_compat	= imx1_dt_board_compat,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx25.c b/arch/arm/mach-imx/mach-imx25.c
index 95de48a1aa7d..51927bd08aef 100644
--- a/arch/arm/mach-imx/mach-imx25.c
+++ b/arch/arm/mach-imx/mach-imx25.c
@@ -22,17 +22,6 @@ static void __init imx25_dt_init(void)
 	imx_aips_allow_unprivileged_access("fsl,imx25-aips");
 }
 
-static void __init mx25_init_irq(void)
-{
-	struct device_node *np;
-	void __iomem *avic_base;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,avic");
-	avic_base = of_iomap(np, 0);
-	BUG_ON(!avic_base);
-	mxc_init_irq(avic_base);
-}
-
 static const char * const imx25_dt_board_compat[] __initconst = {
 	"fsl,imx25",
 	NULL
@@ -42,6 +31,5 @@ DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
 	.init_early	= imx25_init_early,
 	.init_machine	= imx25_dt_init,
 	.init_late      = imx25_pm_init,
-	.init_irq	= mx25_init_irq,
 	.dt_compat	= imx25_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27.c b/arch/arm/mach-imx/mach-imx27.c
index 262422a9c196..e325c9468105 100644
--- a/arch/arm/mach-imx/mach-imx27.c
+++ b/arch/arm/mach-imx/mach-imx27.c
@@ -56,17 +56,6 @@ static void __init imx27_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX27);
 }
 
-static void __init mx27_init_irq(void)
-{
-	void __iomem *avic_base;
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,avic");
-	avic_base = of_iomap(np, 0);
-	BUG_ON(!avic_base);
-	mxc_init_irq(avic_base);
-}
-
 static const char * const imx27_dt_board_compat[] __initconst = {
 	"fsl,imx27",
 	NULL
@@ -75,7 +64,6 @@ static const char * const imx27_dt_board_compat[] __initconst = {
 DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
 	.map_io		= mx27_map_io,
 	.init_early	= imx27_init_early,
-	.init_irq	= mx27_init_irq,
 	.init_late	= imx27_pm_init,
 	.dt_compat	= imx27_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx31.c b/arch/arm/mach-imx/mach-imx31.c
index dc69dfe600df..e9a1092b6093 100644
--- a/arch/arm/mach-imx/mach-imx31.c
+++ b/arch/arm/mach-imx/mach-imx31.c
@@ -14,6 +14,5 @@ static const char * const imx31_dt_board_compat[] __initconst = {
 DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
 	.map_io		= mx31_map_io,
 	.init_early	= imx31_init_early,
-	.init_irq	= mx31_init_irq,
 	.dt_compat	= imx31_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx35.c b/arch/arm/mach-imx/mach-imx35.c
index ec5c3068715c..0fc08218b77d 100644
--- a/arch/arm/mach-imx/mach-imx35.c
+++ b/arch/arm/mach-imx/mach-imx35.c
@@ -27,6 +27,5 @@ DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)")
 	.l2c_aux_mask	= ~0,
 	.map_io		= mx35_map_io,
 	.init_early	= imx35_init_early,
-	.init_irq	= mx35_init_irq,
 	.dt_compat	= imx35_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c
index f4da205f57db..a2d35f9ba474 100644
--- a/arch/arm/mach-imx/mach-imx50.c
+++ b/arch/arm/mach-imx/mach-imx50.c
@@ -9,6 +9,12 @@
 #include <asm/mach/arch.h>
 
 #include "common.h"
+#include "hardware.h"
+
+static void __init imx50_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX50);
+}
 
 static const char * const imx50_dt_board_compat[] __initconst = {
 	"fsl,imx50",
@@ -16,5 +22,6 @@ static const char * const imx50_dt_board_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)")
+	.init_early	= imx50_init_early,
 	.dt_compat	= imx50_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 703998ebb52e..7f6200925752 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -40,27 +40,6 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 	return 0;
 }
 
-static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val)
-{
-	phy_write(dev, 0x0d, device);
-	phy_write(dev, 0x0e, reg);
-	phy_write(dev, 0x0d, (1 << 14) | device);
-	phy_write(dev, 0x0e, val);
-}
-
-static int ksz9031rn_phy_fixup(struct phy_device *dev)
-{
-	/*
-	 * min rx data delay, max rx/tx clock delay,
-	 * min rx/tx control delay
-	 */
-	mmd_write_reg(dev, 2, 4, 0);
-	mmd_write_reg(dev, 2, 5, 0);
-	mmd_write_reg(dev, 2, 8, 0x003ff);
-
-	return 0;
-}
-
 /*
  * fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
  * as they are used for slots1-7 PERST#
@@ -89,82 +68,18 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);
 
-static int ar8031_phy_fixup(struct phy_device *dev)
-{
-	u16 val;
-
-	/* To enable AR8031 output a 125MHz clk from CLK_25M */
-	phy_write(dev, 0xd, 0x7);
-	phy_write(dev, 0xe, 0x8016);
-	phy_write(dev, 0xd, 0x4007);
-
-	val = phy_read(dev, 0xe);
-	val &= 0xffe3;
-	val |= 0x18;
-	phy_write(dev, 0xe, val);
-
-	/* introduce tx clock delay */
-	phy_write(dev, 0x1d, 0x5);
-	val = phy_read(dev, 0x1e);
-	val |= 0x0100;
-	phy_write(dev, 0x1e, val);
-
-	return 0;
-}
-
-#define PHY_ID_AR8031	0x004dd074
-
-static int ar8035_phy_fixup(struct phy_device *dev)
-{
-	u16 val;
-
-	/* Ar803x phy SmartEEE feature cause link status generates glitch,
-	 * which cause ethernet link down/up issue, so disable SmartEEE
-	 */
-	phy_write(dev, 0xd, 0x3);
-	phy_write(dev, 0xe, 0x805d);
-	phy_write(dev, 0xd, 0x4003);
-
-	val = phy_read(dev, 0xe);
-	phy_write(dev, 0xe, val & ~(1 << 8));
-
-	/*
-	 * Enable 125MHz clock from CLK_25M on the AR8031.  This
-	 * is fed in to the IMX6 on the ENET_REF_CLK (V22) pad.
-	 * Also, introduce a tx clock delay.
-	 *
-	 * This is the same as is the AR8031 fixup.
-	 */
-	ar8031_phy_fixup(dev);
-
-	/*check phy power*/
-	val = phy_read(dev, 0x0);
-	if (val & BMCR_PDOWN)
-		phy_write(dev, 0x0, val & ~BMCR_PDOWN);
-
-	return 0;
-}
-
-#define PHY_ID_AR8035 0x004dd072
-
 static void __init imx6q_enet_phy_init(void)
 {
 	if (IS_BUILTIN(CONFIG_PHYLIB)) {
 		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
 				ksz9021rn_phy_fixup);
-		phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
-				ksz9031rn_phy_fixup);
-		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef,
-				ar8031_phy_fixup);
-		phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
-				ar8035_phy_fixup);
 	}
 }
 
 static void __init imx6q_1588_init(void)
 {
 	struct device_node *np;
-	struct clk *ptp_clk;
+	struct clk *ptp_clk, *fec_enet_ref;
 	struct clk *enet_ref;
 	struct regmap *gpr;
 	u32 clksel;
@@ -175,6 +90,14 @@ static void __init imx6q_1588_init(void)
 		return;
 	}
 
+	/*
+	 * If enet_clk_ref configured, we assume DT did it properly and .
+	 * clk-imx6q.c will do needed configuration.
+	 */
+	fec_enet_ref = of_clk_get_by_name(np, "enet_clk_ref");
+	if (!IS_ERR(fec_enet_ref))
+		goto put_node;
+
 	ptp_clk = of_clk_get(np, 2);
 	if (IS_ERR(ptp_clk)) {
 		pr_warn("%s: failed to get ptp clock\n", __func__);
diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
index 781e2a94fdd7..e65ed5218f53 100644
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -15,31 +15,6 @@
 #include "common.h"
 #include "cpuidle.h"
 
-static int ar8031_phy_fixup(struct phy_device *dev)
-{
-	u16 val;
-
-	/* Set RGMII IO voltage to 1.8V */
-	phy_write(dev, 0x1d, 0x1f);
-	phy_write(dev, 0x1e, 0x8);
-
-	/* introduce tx clock delay */
-	phy_write(dev, 0x1d, 0x5);
-	val = phy_read(dev, 0x1e);
-	val |= 0x0100;
-	phy_write(dev, 0x1e, val);
-
-	return 0;
-}
-
-#define PHY_ID_AR8031   0x004dd074
-static void __init imx6sx_enet_phy_init(void)
-{
-	if (IS_BUILTIN(CONFIG_PHYLIB))
-		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
-					   ar8031_phy_fixup);
-}
-
 static void __init imx6sx_enet_clk_sel(void)
 {
 	struct regmap *gpr;
@@ -57,7 +32,6 @@ static void __init imx6sx_enet_clk_sel(void)
 
 static inline void imx6sx_enet_init(void)
 {
-	imx6sx_enet_phy_init();
 	imx6sx_enet_clk_sel();
 }
 
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index 35e81201cb5d..7a0299de1db6 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -4,8 +4,6 @@
  */
 #include <linux/irqchip.h>
 #include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
-#include <linux/micrel_phy.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/regmap.h>
@@ -16,30 +14,12 @@
 #include "cpuidle.h"
 #include "hardware.h"
 
-static void __init imx6ul_enet_clk_init(void)
-{
-	struct regmap *gpr;
-
-	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr");
-	if (!IS_ERR(gpr))
-		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6UL_GPR1_ENET_CLK_DIR,
-				   IMX6UL_GPR1_ENET_CLK_OUTPUT);
-	else
-		pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n");
-}
-
-static inline void imx6ul_enet_init(void)
-{
-	imx6ul_enet_clk_init();
-}
-
 static void __init imx6ul_init_machine(void)
 {
 	imx_print_silicon_rev(cpu_is_imx6ull() ? "i.MX6ULL" : "i.MX6UL",
 		imx_get_soc_revision());
 
 	of_platform_default_populate(NULL, NULL, NULL);
-	imx6ul_enet_init();
 	imx_anatop_init();
 	imx6ul_pm_init();
 }
@@ -63,6 +43,7 @@ static void __init imx6ul_init_late(void)
 static const char * const imx6ul_dt_compat[] __initconst = {
 	"fsl,imx6ul",
 	"fsl,imx6ull",
+	"fsl,imx6ulz",
 	NULL,
 };
 
diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c
index 879c35929a13..6fdd06bcf988 100644
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -14,25 +14,6 @@
 
 #include "common.h"
 
-static int ar8031_phy_fixup(struct phy_device *dev)
-{
-	u16 val;
-
-	/* Set RGMII IO voltage to 1.8V */
-	phy_write(dev, 0x1d, 0x1f);
-	phy_write(dev, 0x1e, 0x8);
-
-	/* disable phy AR8031 SmartEEE function. */
-	phy_write(dev, 0xd, 0x3);
-	phy_write(dev, 0xe, 0x805d);
-	phy_write(dev, 0xd, 0x4003);
-	val = phy_read(dev, 0xe);
-	val &= ~(0x1 << 8);
-	phy_write(dev, 0xe, val);
-
-	return 0;
-}
-
 static int bcm54220_phy_fixup(struct phy_device *dev)
 {
 	/* enable RXC skew select RGMII copper mode */
@@ -44,14 +25,11 @@ static int bcm54220_phy_fixup(struct phy_device *dev)
 	return 0;
 }
 
-#define PHY_ID_AR8031	0x004dd074
 #define PHY_ID_BCM54220	0x600d8589
 
 static void __init imx7d_enet_phy_init(void)
 {
 	if (IS_BUILTIN(CONFIG_PHYLIB)) {
-		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
-					   ar8031_phy_fixup);
 		phy_register_fixup_for_uid(PHY_ID_BCM54220, 0xffffffff,
 					   bcm54220_phy_fixup);
 	}
@@ -91,7 +69,7 @@ static void __init imx7d_init_late(void)
 static void __init imx7d_init_irq(void)
 {
 	imx_init_revision_from_anatop();
-	imx_src_init();
+	imx7_src_init();
 	irqchip_init();
 }
 
@@ -102,6 +80,7 @@ static const char *const imx7d_dt_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)")
+	.smp            = smp_ops(imx7_smp_ops),
 	.init_irq	= imx7d_init_irq,
 	.init_machine	= imx7d_init_machine,
 	.init_late      = imx7d_init_late,
diff --git a/arch/arm/mach-imx/mach-imxrt.c b/arch/arm/mach-imx/mach-imxrt.c
new file mode 100644
index 000000000000..2063a3059c84
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imxrt.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#include <linux/kernel.h>
+#include <asm/mach/arch.h>
+#include <asm/v7m.h>
+
+static const char *const imxrt_compat[] __initconst = {
+	"fsl,imxrt1050",
+	NULL
+};
+
+DT_MACHINE_START(IMXRTDT, "IMXRT (Device Tree Support)")
+	.dt_compat = imxrt_compat,
+	.restart = armv7m_restart,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 5056438e5b42..0788c5cc7f9e 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -12,7 +12,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
-#include <linux/pinctrl/machine.h>
 
 #include <asm/system_misc.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -109,18 +108,6 @@ void __init imx31_init_early(void)
 	mx3_ccm_base = of_iomap(np, 0);
 	BUG_ON(!mx3_ccm_base);
 }
-
-void __init mx31_init_irq(void)
-{
-	void __iomem *avic_base;
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx31-avic");
-	avic_base = of_iomap(np, 0);
-	BUG_ON(!avic_base);
-
-	mxc_init_irq(avic_base);
-}
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
 #ifdef CONFIG_SOC_IMX35
@@ -158,16 +145,4 @@ void __init imx35_init_early(void)
 	mx3_ccm_base = of_iomap(np, 0);
 	BUG_ON(!mx3_ccm_base);
 }
-
-void __init mx35_init_irq(void)
-{
-	void __iomem *avic_base;
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx35-avic");
-	avic_base = of_iomap(np, 0);
-	BUG_ON(!avic_base);
-
-	mxc_init_irq(avic_base);
-}
 #endif /* ifdef CONFIG_SOC_IMX35 */
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index 0dfd0ae7a63d..2157493b78a9 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -99,10 +99,12 @@ struct mmdc_pmu {
 	cpumask_t cpu;
 	struct hrtimer hrtimer;
 	unsigned int active_events;
+	int id;
 	struct device *dev;
 	struct perf_event *mmdc_events[MMDC_NUM_COUNTERS];
 	struct hlist_node node;
 	struct fsl_mmdc_devtype_data *devtype_data;
+	struct clk *mmdc_ipg_clk;
 };
 
 /*
@@ -432,8 +434,6 @@ static enum hrtimer_restart mmdc_pmu_timer_handler(struct hrtimer *hrtimer)
 static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 		void __iomem *mmdc_base, struct device *dev)
 {
-	int mmdc_num;
-
 	*pmu_mmdc = (struct mmdc_pmu) {
 		.pmu = (struct pmu) {
 			.task_ctx_nr    = perf_invalid_context,
@@ -451,26 +451,28 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 		.active_events = 0,
 	};
 
-	mmdc_num = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
+	pmu_mmdc->id = ida_simple_get(&mmdc_ida, 0, 0, GFP_KERNEL);
 
-	return mmdc_num;
+	return pmu_mmdc->id;
 }
 
-static int imx_mmdc_remove(struct platform_device *pdev)
+static void imx_mmdc_remove(struct platform_device *pdev)
 {
 	struct mmdc_pmu *pmu_mmdc = platform_get_drvdata(pdev);
 
+	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	perf_pmu_unregister(&pmu_mmdc->pmu);
+	iounmap(pmu_mmdc->mmdc_base);
+	clk_disable_unprepare(pmu_mmdc->mmdc_ipg_clk);
 	kfree(pmu_mmdc);
-	return 0;
 }
 
-static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base)
+static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base,
+			      struct clk *mmdc_ipg_clk)
 {
 	struct mmdc_pmu *pmu_mmdc;
 	char *name;
-	int mmdc_num;
 	int ret;
 	const struct of_device_id *of_id =
 		of_match_device(imx_mmdc_dt_ids, &pdev->dev);
@@ -493,13 +495,14 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 		cpuhp_mmdc_state = ret;
 	}
 
-	mmdc_num = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
-	if (mmdc_num == 0)
-		name = "mmdc";
-	else
-		name = devm_kasprintf(&pdev->dev,
-				GFP_KERNEL, "mmdc%d", mmdc_num);
+	ret = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
+	if (ret < 0)
+		goto  pmu_free;
+
+	name = devm_kasprintf(&pdev->dev,
+				GFP_KERNEL, "mmdc%d", ret);
 
+	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
 	pmu_mmdc->devtype_data = (struct fsl_mmdc_devtype_data *)of_id->data;
 
 	hrtimer_init(&pmu_mmdc->hrtimer, CLOCK_MONOTONIC,
@@ -520,6 +523,7 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 
 pmu_register_err:
 	pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret);
+	ida_simple_remove(&mmdc_ida, pmu_mmdc->id);
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	hrtimer_cancel(&pmu_mmdc->hrtimer);
 pmu_free:
@@ -529,7 +533,7 @@ pmu_free:
 
 #else
 #define imx_mmdc_remove NULL
-#define imx_mmdc_perf_init(pdev, mmdc_base) 0
+#define imx_mmdc_perf_init(pdev, mmdc_base, mmdc_ipg_clk) 0
 #endif
 
 static int imx_mmdc_probe(struct platform_device *pdev)
@@ -567,7 +571,13 @@ static int imx_mmdc_probe(struct platform_device *pdev)
 	val &= ~(1 << BP_MMDC_MAPSR_PSD);
 	writel_relaxed(val, reg);
 
-	return imx_mmdc_perf_init(pdev, mmdc_base);
+	err = imx_mmdc_perf_init(pdev, mmdc_base, mmdc_ipg_clk);
+	if (err) {
+		iounmap(mmdc_base);
+		clk_disable_unprepare(mmdc_ipg_clk);
+	}
+
+	return err;
 }
 
 int imx_mmdc_get_ddr_type(void)
@@ -581,7 +591,7 @@ static struct platform_driver imx_mmdc_driver = {
 		.of_match_table = imx_mmdc_dt_ids,
 	},
 	.probe		= imx_mmdc_probe,
-	.remove		= imx_mmdc_remove,
+	.remove_new	= imx_mmdc_remove,
 };
 
 static int __init imx_mmdc_init(void)
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index cf4e9335831c..972639038be5 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -92,6 +92,32 @@ const struct smp_operations imx_smp_ops __initconst = {
 #endif
 };
 
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+static void __init imx7_smp_init_cpus(void)
+{
+	struct device_node *np;
+	int i, ncores = 0;
+
+	/* The iMX7D SCU does not report core count, get it from DT */
+	for_each_of_cpu_node(np)
+		ncores++;
+
+	for (i = ncores; i < NR_CPUS; i++)
+		set_cpu_possible(i, false);
+}
+
+const struct smp_operations imx7_smp_ops __initconst = {
+	.smp_init_cpus		= imx7_smp_init_cpus,
+	.smp_boot_secondary	= imx_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= imx_cpu_die,
+	.cpu_kill		= imx_cpu_kill,
+#endif
+};
+
 #define DCFG_CCSR_SCRATCHRW1	0x200
 
 static int ls1021a_boot_secondary(unsigned int cpu, struct task_struct *idle)
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index 020e6deb67c8..237e8aa9fe83 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -12,6 +12,7 @@
 #include <linux/suspend.h>
 #include <linux/io.h>
 
+#include "common.h"
 #include "hardware.h"
 
 static int mx27_suspend_enter(suspend_state_t state)
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index e9962b48e30c..2e3af2bc7758 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -45,7 +45,7 @@
  * This is also the lowest power state possible without affecting
  * non-cpu parts of the system.  For these reasons, imx5 should default
  * to always using this state for cpu idling.  The PM_SUSPEND_STANDBY also
- * uses this state and needs to take no action when registers remain confgiured
+ * uses this state and needs to take no action when registers remain configured
  * for this state.
  */
 #define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 9244437cb1b9..045b9fdd342d 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -10,6 +10,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/genalloc.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <linux/of.h>
@@ -571,6 +572,8 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 		&imx6_suspend,
 		MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
 
+	__arm_iomem_set_ro(suspend_ocram_base, MX6Q_SUSPEND_OCRAM_SIZE);
+
 	goto put_device;
 
 pl310_cache_map_failed:
@@ -619,6 +622,7 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
 
 static void imx6_pm_stby_poweroff(void)
 {
+	gic_cpu_if_down(0);
 	imx6_set_lpm(STOP_POWER_OFF);
 	imx6q_suspend_finish(0);
 
diff --git a/arch/arm/mach-imx/resume-imx6.S b/arch/arm/mach-imx/resume-imx6.S
index 5bd1ba7ef15b..2c0c5c771251 100644
--- a/arch/arm/mach-imx/resume-imx6.S
+++ b/arch/arm/mach-imx/resume-imx6.S
@@ -9,6 +9,8 @@
 #include <asm/hardware/cache-l2x0.h>
 #include "hardware.h"
 
+.arch armv7-a
+
 /*
  * The following code must assume it is running from physical address
  * where absolute virtual addresses to the data section have to be
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index f52f371292ac..59a8e8cc4469 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -6,15 +6,20 @@
 
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/platform_device.h>
 #include <linux/reset-controller.h>
 #include <linux/smp.h>
 #include <asm/smp_plat.h>
 #include "common.h"
+#include "hardware.h"
 
 #define SRC_SCR				0x000
-#define SRC_GPR1			0x020
+#define SRC_GPR1_V1			0x020
+#define SRC_GPR1_V2			0x074
+#define SRC_GPR1(gpr_v2)		((gpr_v2) ? SRC_GPR1_V2 : SRC_GPR1_V1)
 #define BP_SRC_SCR_WARM_RESET_ENABLE	0
 #define BP_SRC_SCR_SW_GPU_RST		1
 #define BP_SRC_SCR_SW_VPU_RST		2
@@ -23,9 +28,18 @@
 #define BP_SRC_SCR_SW_IPU2_RST		12
 #define BP_SRC_SCR_CORE1_RST		14
 #define BP_SRC_SCR_CORE1_ENABLE		22
+/* below is for i.MX7D */
+#define SRC_A7RCR1			0x008
+#define BP_SRC_A7RCR1_A7_CORE1_ENABLE	1
+#define GPC_CPU_PGC_SW_PUP_REQ		0xf0
+#define GPC_CPU_PGC_SW_PDN_REQ		0xfc
+#define GPC_PGC_C1			0x840
+#define BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7	0x2
 
 static void __iomem *src_base;
 static DEFINE_SPINLOCK(scr_lock);
+static bool gpr_v2;
+static void __iomem *gpc_base;
 
 static const int sw_reset_bits[5] = {
 	BP_SRC_SCR_SW_GPU_RST,
@@ -68,22 +82,64 @@ static const struct reset_control_ops imx_src_ops = {
 	.reset = imx_src_reset_module,
 };
 
-static struct reset_controller_dev imx_reset_controller = {
-	.ops = &imx_src_ops,
-	.nr_resets = ARRAY_SIZE(sw_reset_bits),
-};
+static void imx_gpcv2_set_m_core_pgc(bool enable, u32 offset)
+{
+	writel_relaxed(enable, gpc_base + offset);
+}
+
+/*
+ * The motivation for bringing up the second i.MX7D core inside the kernel
+ * is that legacy vendor bootloaders usually do not implement PSCI support.
+ * This is a significant blocker for systems in the field that are running old
+ * bootloader versions to upgrade to a modern mainline kernel version, as only
+ * one CPU of the i.MX7D would be brought up.
+ * Bring up the second i.MX7D core inside the kernel to make the migration
+ * path to mainline kernel easier for the existing iMX7D users.
+ */
+void imx_gpcv2_set_core1_pdn_pup_by_software(bool pdn)
+{
+	u32 reg = pdn ? GPC_CPU_PGC_SW_PDN_REQ : GPC_CPU_PGC_SW_PUP_REQ;
+	u32 val, pup;
+	int ret;
+
+	imx_gpcv2_set_m_core_pgc(true, GPC_PGC_C1);
+	val = readl_relaxed(gpc_base + reg);
+	val |= BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7;
+	writel_relaxed(val, gpc_base + reg);
+
+	ret = readl_relaxed_poll_timeout_atomic(gpc_base + reg, pup,
+				!(pup & BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7),
+				5, 1000000);
+	if (ret < 0) {
+		pr_err("i.MX7D: CORE1_A7 power up timeout\n");
+		val &= ~BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7;
+		writel_relaxed(val, gpc_base + reg);
+	}
+
+	imx_gpcv2_set_m_core_pgc(false, GPC_PGC_C1);
+}
 
 void imx_enable_cpu(int cpu, bool enable)
 {
 	u32 mask, val;
 
 	cpu = cpu_logical_map(cpu);
-	mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
 	spin_lock(&scr_lock);
-	val = readl_relaxed(src_base + SRC_SCR);
-	val = enable ? val | mask : val & ~mask;
-	val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1);
-	writel_relaxed(val, src_base + SRC_SCR);
+	if (gpr_v2) {
+		if (enable)
+			imx_gpcv2_set_core1_pdn_pup_by_software(false);
+
+		mask = 1 << (BP_SRC_A7RCR1_A7_CORE1_ENABLE + cpu - 1);
+		val = readl_relaxed(src_base + SRC_A7RCR1);
+		val = enable ? val | mask : val & ~mask;
+		writel_relaxed(val, src_base + SRC_A7RCR1);
+	} else {
+		mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
+		val = readl_relaxed(src_base + SRC_SCR);
+		val = enable ? val | mask : val & ~mask;
+		val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1);
+		writel_relaxed(val, src_base + SRC_SCR);
+	}
 	spin_unlock(&scr_lock);
 }
 
@@ -91,19 +147,19 @@ void imx_set_cpu_jump(int cpu, void *jump_addr)
 {
 	cpu = cpu_logical_map(cpu);
 	writel_relaxed(__pa_symbol(jump_addr),
-		       src_base + SRC_GPR1 + cpu * 8);
+		       src_base + SRC_GPR1(gpr_v2) + cpu * 8);
 }
 
 u32 imx_get_cpu_arg(int cpu)
 {
 	cpu = cpu_logical_map(cpu);
-	return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4);
+	return readl_relaxed(src_base + SRC_GPR1(gpr_v2) + cpu * 8 + 4);
 }
 
 void imx_set_cpu_arg(int cpu, u32 arg)
 {
 	cpu = cpu_logical_map(cpu);
-	writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
+	writel_relaxed(arg, src_base + SRC_GPR1(gpr_v2) + cpu * 8 + 4);
 }
 
 void __init imx_src_init(void)
@@ -117,10 +173,6 @@ void __init imx_src_init(void)
 	src_base = of_iomap(np, 0);
 	WARN_ON(!src_base);
 
-	imx_reset_controller.of_node = np;
-	if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
-		reset_controller_register(&imx_reset_controller);
-
 	/*
 	 * force warm reset sources to generate cold reset
 	 * for a more reliable restart
@@ -131,3 +183,56 @@ void __init imx_src_init(void)
 	writel_relaxed(val, src_base + SRC_SCR);
 	spin_unlock(&scr_lock);
 }
+
+void __init imx7_src_init(void)
+{
+	struct device_node *np;
+
+	gpr_v2 = true;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx7d-src");
+	if (!np)
+		return;
+
+	src_base = of_iomap(np, 0);
+	if (!src_base)
+		return;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx7d-gpc");
+	if (!np)
+		return;
+
+	gpc_base = of_iomap(np, 0);
+	if (!gpc_base)
+		return;
+}
+
+static const struct of_device_id imx_src_dt_ids[] = {
+	{ .compatible = "fsl,imx51-src" },
+	{ /* sentinel */ }
+};
+
+static int imx_src_probe(struct platform_device *pdev)
+{
+	struct reset_controller_dev *rcdev;
+
+	rcdev = devm_kzalloc(&pdev->dev, sizeof(*rcdev), GFP_KERNEL);
+	if (!rcdev)
+		return -ENOMEM;
+
+	rcdev->ops = &imx_src_ops;
+	rcdev->dev = &pdev->dev;
+	rcdev->of_node = pdev->dev.of_node;
+	rcdev->nr_resets = ARRAY_SIZE(sw_reset_bits);
+
+	return devm_reset_controller_register(&pdev->dev, rcdev);
+}
+
+static struct platform_driver imx_src_driver = {
+	.driver = {
+		.name = "imx-src",
+		.of_match_table = imx_src_dt_ids,
+	},
+	.probe = imx_src_probe,
+};
+builtin_platform_driver(imx_src_driver);
diff --git a/arch/arm/mach-imx/suspend-imx53.S b/arch/arm/mach-imx/suspend-imx53.S
index 41b8aad65363..46570ec2fbcf 100644
--- a/arch/arm/mach-imx/suspend-imx53.S
+++ b/arch/arm/mach-imx/suspend-imx53.S
@@ -28,11 +28,11 @@
  *                              ^
  *                              ^
  *                      imx53_suspend code
- *              PM_INFO structure(imx53_suspend_info)
+ *              PM_INFO structure(imx5_cpu_suspend_info)
  * ======================== low address =======================
  */
 
-/* Offsets of members of struct imx53_suspend_info */
+/* Offsets of members of struct imx5_cpu_suspend_info */
 #define SUSPEND_INFO_MX53_M4IF_V_OFFSET		0x0
 #define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET	0x4
 #define SUSPEND_INFO_MX53_IO_COUNT_OFFSET	0x8
diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S
index e06f946b75b9..63ccc2d0e920 100644
--- a/arch/arm/mach-imx/suspend-imx6.S
+++ b/arch/arm/mach-imx/suspend-imx6.S
@@ -9,6 +9,8 @@
 #include <asm/hardware/cache-l2x0.h>
 #include "hardware.h"
 
+.arch armv7-a
+
 /*
  * ==================== low level suspend ====================
  *
diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c
index 479a01bdac56..8b3d98d288d9 100644
--- a/arch/arm/mach-imx/tzic.c
+++ b/arch/arm/mach-imx/tzic.c
@@ -134,7 +134,7 @@ static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
 			while (stat) {
 				handled = 1;
 				irqofs = fls(stat) - 1;
-				handle_domain_irq(domain, irqofs + i * 32, regs);
+				generic_handle_domain_irq(domain, irqofs + i * 32);
 				stat &= ~(1 << irqofs);
 			}
 		}
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
deleted file mode 100644
index 7a9808b01763..000000000000
--- a/arch/arm/mach-integrator/Kconfig
+++ /dev/null
@@ -1,160 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_INTEGRATOR
-	bool "ARM Ltd. Integrator family"
-	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6
-	select ARM_AMBA
-	select CMA
-	select DMA_CMA
-	select HAVE_TCM
-	select ICST
-	select MFD_SYSCON
-	select PLAT_VERSATILE
-	select POWER_RESET
-	select POWER_RESET_VERSATILE
-	select POWER_SUPPLY
-	select SOC_INTEGRATOR_CM
-	select VERSATILE_FPGA_IRQ
-	help
-	  Support for ARM's Integrator platform.
-
-if ARCH_INTEGRATOR
-
-config ARCH_INTEGRATOR_AP
-	bool "Support Integrator/AP and Integrator/PP2 platforms"
-	select INTEGRATOR_AP_TIMER
-	select SERIAL_AMBA_PL010 if TTY
-	select SERIAL_AMBA_PL010_CONSOLE if TTY
-	select SOC_BUS
-	help
-	  Include support for the ARM(R) Integrator/AP and
-	  Integrator/PP2 platforms.
-
-config INTEGRATOR_IMPD1
-	bool "Include support for Integrator/IM-PD1"
-	depends on ARCH_INTEGRATOR_AP
-	select ARM_VIC
-	select GPIO_PL061
-	select GPIOLIB
-	select REGULATOR
-	select REGULATOR_FIXED_VOLTAGE
-	help
-	  The IM-PD1 is an add-on logic module for the Integrator which
-	  allows ARM(R) Ltd PrimeCells to be developed and evaluated.
-	  The IM-PD1 can be found on the Integrator/PP2 platform.
-
-config INTEGRATOR_CM7TDMI
-	bool "Integrator/CM7TDMI core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V4 && !MMU
-	select CPU_ARM7TDMI
-
-config INTEGRATOR_CM720T
-	bool "Integrator/CM720T core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V4T
-	select CPU_ARM720T
-
-config INTEGRATOR_CM740T
-	bool "Integrator/CM740T core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V4T && !MMU
-	select CPU_ARM740T
-
-config INTEGRATOR_CM920T
-	bool "Integrator/CM920T core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V4T
-	select CPU_ARM920T
-
-config INTEGRATOR_CM922T_XA10
-	bool "Integrator/CM922T-XA10 core module"
-	depends on ARCH_MULTI_V4T
-	depends on ARCH_INTEGRATOR_AP
-	select CPU_ARM922T
-
-config INTEGRATOR_CM926EJS
-	bool "Integrator/CM926EJ-S core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V5
-	select CPU_ARM926T
-
-config INTEGRATOR_CM940T
-	bool "Integrator/CM940T core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V4T && !MMU
-	select CPU_ARM940T
-
-config INTEGRATOR_CM946ES
-	bool "Integrator/CM946E-S core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V5 && !MMU
-	select CPU_ARM946E
-
-config INTEGRATOR_CM966ES
-	bool "Integrator/CM966E-S core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on BROKEN # no kernel support
-
-config INTEGRATOR_CM10200E_REV0
-	bool "Integrator/CM10200E rev.0 core module"
-	depends on ARCH_INTEGRATOR_AP && n
-	depends on ARCH_MULTI_V5
-	select CPU_ARM1020
-
-config INTEGRATOR_CM10200E
-	bool "Integrator/CM10200E core module"
-	depends on ARCH_INTEGRATOR_AP && n
-	depends on ARCH_MULTI_V5
-	select CPU_ARM1020E
-
-config INTEGRATOR_CM10220E
-	bool "Integrator/CM10220E core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V5
-	select CPU_ARM1022
-
-config INTEGRATOR_CM1026EJS
-	bool "Integrator/CM1026EJ-S core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V5
-	select CPU_ARM1026
-
-config INTEGRATOR_CM1136JFS
-	bool "Integrator/CM1136JF-S core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V6
-	select CPU_V6
-
-config ARCH_INTEGRATOR_CP
-	bool "Support Integrator/CP platform"
-	depends on (!MMU || ARCH_MULTI_V5 || ARCH_MULTI_V6)
-	select ARM_TIMER_SP804
-	select SERIAL_AMBA_PL011 if TTY
-	select SERIAL_AMBA_PL011_CONSOLE if TTY
-	select SOC_BUS
-	help
-	  Include support for the ARM(R) Integrator CP platform.
-
-config INTEGRATOR_CT7T
-	bool "Integrator/CT7TD (ARM7TDMI) core tile"
-	depends on ARCH_INTEGRATOR_CP
-	depends on ARCH_MULTI_V4T && !MMU
-	select CPU_ARM7TDMI
-
-config INTEGRATOR_CT926
-	bool "Integrator/CT926 (ARM926EJ-S) core tile"
-	depends on ARCH_INTEGRATOR_CP
-	depends on ARCH_MULTI_V5
-	select CPU_ARM926T
-
-config INTEGRATOR_CTB36
-	bool "Integrator/CTB36 (ARM1136JF-S) core tile"
-	depends on ARCH_INTEGRATOR_CP
-	depends on ARCH_MULTI_V6
-	select CPU_V6
-
-config ARCH_CINTEGRATOR
-	depends on ARCH_INTEGRATOR_CP
-	def_bool y
-
-endif
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
deleted file mode 100644
index 7857a55c90b0..000000000000
--- a/arch/arm/mach-integrator/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y					:= core.o
-obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
-obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
deleted file mode 100644
index 0fe5e1dc9d89..000000000000
--- a/arch/arm/mach-integrator/core.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-integrator/core.c
- *
- *  Copyright (C) 2000-2003 Deep Blue Solutions Ltd
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/export.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/memblock.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/serial.h>
-#include <linux/io.h>
-#include <linux/stat.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/pgtable.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "cm.h"
-#include "common.h"
-
-static DEFINE_RAW_SPINLOCK(cm_lock);
-static void __iomem *cm_base;
-
-/**
- * cm_get - get the value from the CM_CTRL register
- */
-u32 cm_get(void)
-{
-	return readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET);
-}
-
-/**
- * cm_control - update the CM_CTRL register.
- * @mask: bits to change
- * @set: bits to set
- */
-void cm_control(u32 mask, u32 set)
-{
-	unsigned long flags;
-	u32 val;
-
-	raw_spin_lock_irqsave(&cm_lock, flags);
-	val = readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET) & ~mask;
-	writel(val | set, cm_base + INTEGRATOR_HDR_CTRL_OFFSET);
-	raw_spin_unlock_irqrestore(&cm_lock, flags);
-}
-
-void cm_clear_irqs(void)
-{
-	/* disable core module IRQs */
-	writel(0xffffffffU, cm_base + INTEGRATOR_HDR_IC_OFFSET +
-		IRQ_ENABLE_CLEAR);
-}
-
-static const struct of_device_id cm_match[] = {
-	{ .compatible = "arm,core-module-integrator"},
-	{ },
-};
-
-void cm_init(void)
-{
-	struct device_node *cm = of_find_matching_node(NULL, cm_match);
-
-	if (!cm) {
-		pr_crit("no core module node found in device tree\n");
-		return;
-	}
-	cm_base = of_iomap(cm, 0);
-	if (!cm_base) {
-		pr_crit("could not remap core module\n");
-		return;
-	}
-	cm_clear_irqs();
-}
-
-/*
- * We need to stop things allocating the low memory; ideally we need a
- * better implementation of GFP_DMA which does not assume that DMA-able
- * memory starts at zero.
- */
-void __init integrator_reserve(void)
-{
-	memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
-}
diff --git a/arch/arm/mach-integrator/hardware.h b/arch/arm/mach-integrator/hardware.h
deleted file mode 100644
index 4d6ade3dd4ee..000000000000
--- a/arch/arm/mach-integrator/hardware.h
+++ /dev/null
@@ -1,341 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- *  This file contains the hardware definitions of the Integrator.
- *
- *  Copyright (C) 1998-1999 ARM Limited.
- */
-#ifndef INTEGRATOR_HARDWARE_H
-#define INTEGRATOR_HARDWARE_H
-
-/*
- * Where in virtual memory the IO devices (timers, system controllers
- * and so on)
- */
-#define IO_BASE			0xF0000000                 // VA of IO
-#define IO_SIZE			0x0B000000                 // How much?
-#define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
-
-/* macro to get at IO space when running virtually */
-#ifdef CONFIG_MMU
-#define IO_ADDRESS(x)	(((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
-#else
-#define IO_ADDRESS(x)	(x)
-#endif
-
-#define __io_address(n)		((void __iomem *)IO_ADDRESS(n))
-
-/*
- *  Integrator memory map
- */
-#define INTEGRATOR_BOOT_ROM_LO          0x00000000
-#define INTEGRATOR_BOOT_ROM_HI          0x20000000
-#define INTEGRATOR_BOOT_ROM_BASE        INTEGRATOR_BOOT_ROM_HI	 /*  Normal position */
-#define INTEGRATOR_BOOT_ROM_SIZE        SZ_512K
-
-/*
- * New Core Modules have different amounts of SSRAM, the amount of SSRAM
- * fitted can be found in HDR_STAT.
- *
- * The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to
- * the minimum amount of SSRAM fitted on any core module.
- *
- * New Core Modules also alias the SSRAM.
- *
- */
-#define INTEGRATOR_SSRAM_BASE           0x00000000
-#define INTEGRATOR_SSRAM_ALIAS_BASE     0x10800000
-#define INTEGRATOR_SSRAM_SIZE           SZ_256K
-
-#define INTEGRATOR_FLASH_BASE           0x24000000
-#define INTEGRATOR_FLASH_SIZE           SZ_32M
-
-#define INTEGRATOR_MBRD_SSRAM_BASE      0x28000000
-#define INTEGRATOR_MBRD_SSRAM_SIZE      SZ_512K
-
-/*
- *  SDRAM is a SIMM therefore the size is not known.
- */
-#define INTEGRATOR_SDRAM_BASE           0x00040000
-
-#define INTEGRATOR_SDRAM_ALIAS_BASE     0x80000000
-#define INTEGRATOR_HDR0_SDRAM_BASE      0x80000000
-#define INTEGRATOR_HDR1_SDRAM_BASE      0x90000000
-#define INTEGRATOR_HDR2_SDRAM_BASE      0xA0000000
-#define INTEGRATOR_HDR3_SDRAM_BASE      0xB0000000
-
-/*
- *  Logic expansion modules
- *
- */
-#define INTEGRATOR_LOGIC_MODULES_BASE   0xC0000000
-#define INTEGRATOR_LOGIC_MODULE0_BASE   0xC0000000
-#define INTEGRATOR_LOGIC_MODULE1_BASE   0xD0000000
-#define INTEGRATOR_LOGIC_MODULE2_BASE   0xE0000000
-#define INTEGRATOR_LOGIC_MODULE3_BASE   0xF0000000
-
-/*
- * Integrator header card registers
- */
-#define INTEGRATOR_HDR_ID_OFFSET        0x00
-#define INTEGRATOR_HDR_PROC_OFFSET      0x04
-#define INTEGRATOR_HDR_OSC_OFFSET       0x08
-#define INTEGRATOR_HDR_CTRL_OFFSET      0x0C
-#define INTEGRATOR_HDR_STAT_OFFSET      0x10
-#define INTEGRATOR_HDR_LOCK_OFFSET      0x14
-#define INTEGRATOR_HDR_SDRAM_OFFSET     0x20
-#define INTEGRATOR_HDR_INIT_OFFSET      0x24	 /*  CM9x6 */
-#define INTEGRATOR_HDR_IC_OFFSET        0x40
-#define INTEGRATOR_HDR_SPDBASE_OFFSET   0x100
-#define INTEGRATOR_HDR_SPDTOP_OFFSET    0x200
-
-#define INTEGRATOR_HDR_BASE             0x10000000
-#define INTEGRATOR_HDR_ID               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_ID_OFFSET)
-#define INTEGRATOR_HDR_PROC             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_PROC_OFFSET)
-#define INTEGRATOR_HDR_OSC              (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_OSC_OFFSET)
-#define INTEGRATOR_HDR_CTRL             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_CTRL_OFFSET)
-#define INTEGRATOR_HDR_STAT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_STAT_OFFSET)
-#define INTEGRATOR_HDR_LOCK             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_LOCK_OFFSET)
-#define INTEGRATOR_HDR_SDRAM            (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SDRAM_OFFSET)
-#define INTEGRATOR_HDR_INIT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_INIT_OFFSET)
-#define INTEGRATOR_HDR_IC               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_IC_OFFSET)
-#define INTEGRATOR_HDR_SPDBASE          (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDBASE_OFFSET)
-#define INTEGRATOR_HDR_SPDTOP           (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDTOP_OFFSET)
-
-#define INTEGRATOR_HDR_CTRL_LED         0x01
-#define INTEGRATOR_HDR_CTRL_MBRD_DETECH 0x02
-#define INTEGRATOR_HDR_CTRL_REMAP       0x04
-#define INTEGRATOR_HDR_CTRL_RESET       0x08
-#define INTEGRATOR_HDR_CTRL_HIGHVECTORS 0x10
-#define INTEGRATOR_HDR_CTRL_BIG_ENDIAN  0x20
-#define INTEGRATOR_HDR_CTRL_FASTBUS     0x40
-#define INTEGRATOR_HDR_CTRL_SYNC        0x80
-
-#define INTEGRATOR_HDR_OSC_CORE_10MHz   0x102
-#define INTEGRATOR_HDR_OSC_CORE_15MHz   0x107
-#define INTEGRATOR_HDR_OSC_CORE_20MHz   0x10C
-#define INTEGRATOR_HDR_OSC_CORE_25MHz   0x111
-#define INTEGRATOR_HDR_OSC_CORE_30MHz   0x116
-#define INTEGRATOR_HDR_OSC_CORE_35MHz   0x11B
-#define INTEGRATOR_HDR_OSC_CORE_40MHz   0x120
-#define INTEGRATOR_HDR_OSC_CORE_45MHz   0x125
-#define INTEGRATOR_HDR_OSC_CORE_50MHz   0x12A
-#define INTEGRATOR_HDR_OSC_CORE_55MHz   0x12F
-#define INTEGRATOR_HDR_OSC_CORE_60MHz   0x134
-#define INTEGRATOR_HDR_OSC_CORE_65MHz   0x139
-#define INTEGRATOR_HDR_OSC_CORE_70MHz   0x13E
-#define INTEGRATOR_HDR_OSC_CORE_75MHz   0x143
-#define INTEGRATOR_HDR_OSC_CORE_80MHz   0x148
-#define INTEGRATOR_HDR_OSC_CORE_85MHz   0x14D
-#define INTEGRATOR_HDR_OSC_CORE_90MHz   0x152
-#define INTEGRATOR_HDR_OSC_CORE_95MHz   0x157
-#define INTEGRATOR_HDR_OSC_CORE_100MHz  0x15C
-#define INTEGRATOR_HDR_OSC_CORE_105MHz  0x161
-#define INTEGRATOR_HDR_OSC_CORE_110MHz  0x166
-#define INTEGRATOR_HDR_OSC_CORE_115MHz  0x16B
-#define INTEGRATOR_HDR_OSC_CORE_120MHz  0x170
-#define INTEGRATOR_HDR_OSC_CORE_125MHz  0x175
-#define INTEGRATOR_HDR_OSC_CORE_130MHz  0x17A
-#define INTEGRATOR_HDR_OSC_CORE_135MHz  0x17F
-#define INTEGRATOR_HDR_OSC_CORE_140MHz  0x184
-#define INTEGRATOR_HDR_OSC_CORE_145MHz  0x189
-#define INTEGRATOR_HDR_OSC_CORE_150MHz  0x18E
-#define INTEGRATOR_HDR_OSC_CORE_155MHz  0x193
-#define INTEGRATOR_HDR_OSC_CORE_160MHz  0x198
-#define INTEGRATOR_HDR_OSC_CORE_MASK    0x7FF
-
-#define INTEGRATOR_HDR_OSC_MEM_10MHz    0x10C000
-#define INTEGRATOR_HDR_OSC_MEM_15MHz    0x116000
-#define INTEGRATOR_HDR_OSC_MEM_20MHz    0x120000
-#define INTEGRATOR_HDR_OSC_MEM_25MHz    0x12A000
-#define INTEGRATOR_HDR_OSC_MEM_30MHz    0x134000
-#define INTEGRATOR_HDR_OSC_MEM_33MHz    0x13A000
-#define INTEGRATOR_HDR_OSC_MEM_40MHz    0x148000
-#define INTEGRATOR_HDR_OSC_MEM_50MHz    0x15C000
-#define INTEGRATOR_HDR_OSC_MEM_60MHz    0x170000
-#define INTEGRATOR_HDR_OSC_MEM_66MHz    0x17C000
-#define INTEGRATOR_HDR_OSC_MEM_MASK     0x7FF000
-
-#define INTEGRATOR_HDR_OSC_BUS_MODE_CM7x0  0x0
-#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x0  0x0800000
-#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x6  0x1000000
-#define INTEGRATOR_HDR_OSC_BUS_MODE_CM10x00  0x1800000
-#define INTEGRATOR_HDR_OSC_BUS_MODE_MASK  0x1800000
-
-#define INTEGRATOR_HDR_SDRAM_SPD_OK     (1 << 5)
-
-/*
- * Integrator system registers
- */
-
-/*
- *  System Controller
- */
-#define INTEGRATOR_SC_ID_OFFSET         0x00
-#define INTEGRATOR_SC_OSC_OFFSET        0x04
-#define INTEGRATOR_SC_CTRLS_OFFSET      0x08
-#define INTEGRATOR_SC_CTRLC_OFFSET      0x0C
-#define INTEGRATOR_SC_DEC_OFFSET        0x10
-#define INTEGRATOR_SC_ARB_OFFSET        0x14
-#define INTEGRATOR_SC_LOCK_OFFSET       0x1C
-
-#define INTEGRATOR_SC_BASE              0x11000000
-#define INTEGRATOR_SC_ID                (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ID_OFFSET)
-#define INTEGRATOR_SC_OSC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_OSC_OFFSET)
-#define INTEGRATOR_SC_CTRLS             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET)
-#define INTEGRATOR_SC_CTRLC             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET)
-#define INTEGRATOR_SC_DEC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_DEC_OFFSET)
-#define INTEGRATOR_SC_ARB               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ARB_OFFSET)
-#define INTEGRATOR_SC_PCIENABLE         (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
-#define INTEGRATOR_SC_LOCK              (INTEGRATOR_SC_BASE + INTEGRATOR_SC_LOCK_OFFSET)
-
-#define INTEGRATOR_SC_OSC_SYS_10MHz     0x20
-#define INTEGRATOR_SC_OSC_SYS_15MHz     0x34
-#define INTEGRATOR_SC_OSC_SYS_20MHz     0x48
-#define INTEGRATOR_SC_OSC_SYS_25MHz     0x5C
-#define INTEGRATOR_SC_OSC_SYS_33MHz     0x7C
-#define INTEGRATOR_SC_OSC_SYS_MASK      0xFF
-
-#define INTEGRATOR_SC_OSC_PCI_25MHz     0x100
-#define INTEGRATOR_SC_OSC_PCI_33MHz     0x0
-#define INTEGRATOR_SC_OSC_PCI_MASK      0x100
-
-#define INTEGRATOR_SC_CTRL_SOFTRST      (1 << 0)
-#define INTEGRATOR_SC_CTRL_nFLVPPEN     (1 << 1)
-#define INTEGRATOR_SC_CTRL_nFLWP        (1 << 2)
-#define INTEGRATOR_SC_CTRL_URTS0        (1 << 4)
-#define INTEGRATOR_SC_CTRL_UDTR0        (1 << 5)
-#define INTEGRATOR_SC_CTRL_URTS1        (1 << 6)
-#define INTEGRATOR_SC_CTRL_UDTR1        (1 << 7)
-
-/*
- *  External Bus Interface
- */
-#define INTEGRATOR_EBI_BASE             0x12000000
-
-#define INTEGRATOR_EBI_CSR0_OFFSET      0x00
-#define INTEGRATOR_EBI_CSR1_OFFSET      0x04
-#define INTEGRATOR_EBI_CSR2_OFFSET      0x08
-#define INTEGRATOR_EBI_CSR3_OFFSET      0x0C
-#define INTEGRATOR_EBI_LOCK_OFFSET      0x20
-
-#define INTEGRATOR_EBI_CSR0             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR0_OFFSET)
-#define INTEGRATOR_EBI_CSR1             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
-#define INTEGRATOR_EBI_CSR2             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR2_OFFSET)
-#define INTEGRATOR_EBI_CSR3             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR3_OFFSET)
-#define INTEGRATOR_EBI_LOCK             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
-
-#define INTEGRATOR_EBI_8_BIT            0x00
-#define INTEGRATOR_EBI_16_BIT           0x01
-#define INTEGRATOR_EBI_32_BIT           0x02
-#define INTEGRATOR_EBI_WRITE_ENABLE     0x04
-#define INTEGRATOR_EBI_SYNC             0x08
-#define INTEGRATOR_EBI_WS_2             0x00
-#define INTEGRATOR_EBI_WS_3             0x10
-#define INTEGRATOR_EBI_WS_4             0x20
-#define INTEGRATOR_EBI_WS_5             0x30
-#define INTEGRATOR_EBI_WS_6             0x40
-#define INTEGRATOR_EBI_WS_7             0x50
-#define INTEGRATOR_EBI_WS_8             0x60
-#define INTEGRATOR_EBI_WS_9             0x70
-#define INTEGRATOR_EBI_WS_10            0x80
-#define INTEGRATOR_EBI_WS_11            0x90
-#define INTEGRATOR_EBI_WS_12            0xA0
-#define INTEGRATOR_EBI_WS_13            0xB0
-#define INTEGRATOR_EBI_WS_14            0xC0
-#define INTEGRATOR_EBI_WS_15            0xD0
-#define INTEGRATOR_EBI_WS_16            0xE0
-#define INTEGRATOR_EBI_WS_17            0xF0
-
-
-#define INTEGRATOR_CT_BASE              0x13000000	 /*  Counter/Timers */
-#define INTEGRATOR_IC_BASE              0x14000000	 /*  Interrupt Controller */
-#define INTEGRATOR_RTC_BASE             0x15000000	 /*  Real Time Clock */
-#define INTEGRATOR_UART0_BASE           0x16000000	 /*  UART 0 */
-#define INTEGRATOR_UART1_BASE           0x17000000	 /*  UART 1 */
-#define INTEGRATOR_KBD_BASE             0x18000000	 /*  Keyboard */
-#define INTEGRATOR_MOUSE_BASE           0x19000000	 /*  Mouse */
-
-/*
- *  LED's & Switches
- */
-#define INTEGRATOR_DBG_ALPHA_OFFSET     0x00
-#define INTEGRATOR_DBG_LEDS_OFFSET      0x04
-#define INTEGRATOR_DBG_SWITCH_OFFSET    0x08
-
-#define INTEGRATOR_DBG_BASE             0x1A000000
-#define INTEGRATOR_DBG_ALPHA            (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_ALPHA_OFFSET)
-#define INTEGRATOR_DBG_LEDS             (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET)
-#define INTEGRATOR_DBG_SWITCH           (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET)
-
-#define INTEGRATOR_AP_GPIO_BASE		0x1B000000	/* GPIO */
-
-#define INTEGRATOR_CP_MMC_BASE		0x1C000000	/* MMC */
-#define INTEGRATOR_CP_AACI_BASE		0x1D000000	/* AACI */
-#define INTEGRATOR_CP_ETH_BASE		0xC8000000	/* Ethernet */
-#define INTEGRATOR_CP_GPIO_BASE		0xC9000000	/* GPIO */
-#define INTEGRATOR_CP_SIC_BASE		0xCA000000	/* SIC */
-#define INTEGRATOR_CP_CTL_BASE		0xCB000000	/* CP system control */
-
-/* PS2 Keyboard interface */
-#define KMI0_BASE                       INTEGRATOR_KBD_BASE
-
-/* PS2 Mouse interface */
-#define KMI1_BASE                       INTEGRATOR_MOUSE_BASE
-
-/*
- * Integrator Interrupt Controllers
- *
- *
- * Offsets from interrupt controller base
- *
- * System Controller interrupt controller base is
- *
- * 	INTEGRATOR_IC_BASE + (header_number << 6)
- *
- * Core Module interrupt controller base is
- *
- * 	INTEGRATOR_HDR_IC
- */
-#define IRQ_STATUS                      0
-#define IRQ_RAW_STATUS                  0x04
-#define IRQ_ENABLE                      0x08
-#define IRQ_ENABLE_SET                  0x08
-#define IRQ_ENABLE_CLEAR                0x0C
-
-#define INT_SOFT_SET                    0x10
-#define INT_SOFT_CLEAR                  0x14
-
-#define FIQ_STATUS                      0x20
-#define FIQ_RAW_STATUS                  0x24
-#define FIQ_ENABLE                      0x28
-#define FIQ_ENABLE_SET                  0x28
-#define FIQ_ENABLE_CLEAR                0x2C
-
-
-/*
- * LED's
- */
-#define GREEN_LED                       0x01
-#define YELLOW_LED                      0x02
-#define RED_LED                         0x04
-#define GREEN_LED_2                     0x08
-#define ALL_LEDS                        0x0F
-
-#define LED_BANK                        INTEGRATOR_DBG_LEDS
-
-/*
- *  Timer definitions
- *
- *  Only use timer 1 & 2
- *  (both run at 24MHz and will need the clock divider set to 16).
- *
- *  Timer 0 runs at bus frequency
- */
-#define INTEGRATOR_TIMER0_BASE          INTEGRATOR_CT_BASE
-#define INTEGRATOR_TIMER1_BASE          (INTEGRATOR_CT_BASE + 0x100)
-#define INTEGRATOR_TIMER2_BASE          (INTEGRATOR_CT_BASE + 0x200)
-
-#define INTEGRATOR_CSR_BASE             0x10000000
-#define INTEGRATOR_CSR_SIZE             0x10000000
-
-#endif /* INTEGRATOR_HARDWARE_H */
diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig
deleted file mode 100644
index f1f342cb0509..000000000000
--- a/arch/arm/mach-iop32x/Kconfig
+++ /dev/null
@@ -1,47 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-if ARCH_IOP32X
-
-menu "IOP32x Implementation Options"
-
-comment "IOP32x Platform Types"
-
-config MACH_EP80219
-	bool
-
-config MACH_GLANTANK
-	bool "Enable support for the IO-Data GLAN Tank"
-	help
-	  Say Y here if you want to run your kernel on the GLAN Tank
-	  NAS appliance or machines from IO-Data's HDL-Gxxx, HDL-GWxxx
-	  and HDL-GZxxx series.
-
-config ARCH_IQ80321
-	bool "Enable support for IQ80321"
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ80321
-	  evaluation kit for the IOP321 processor.
-
-config ARCH_IQ31244
-	bool "Enable support for EP80219/IQ31244"
-	select MACH_EP80219
-	help
-	  Say Y here if you want to run your kernel on the Intel EP80219
-	  evaluation kit for the Intel 80219 processor (a IOP321 variant)
-	  or the IQ31244 evaluation kit for the IOP321 processor.
-
-config MACH_N2100
-	bool "Enable support for the Thecus n2100"
-	help
-	  Say Y here if you want to run your kernel on the Thecus n2100
-	  NAS appliance.
-
-config MACH_EM7210
-	bool "Enable support for the Lanner EM7210"
-	help
-	  Say Y here if you want to run your kernel on the Lanner EM7210
-	  board. Say also Y here if you have a SS4000e Baxter Creek NAS
-	  appliance."
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile
deleted file mode 100644
index c8018ef5c6a9..000000000000
--- a/arch/arm/mach-iop32x/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-obj-$(CONFIG_ARCH_IOP32X) += irq.o
-obj-$(CONFIG_ARCH_IOP32X) += i2c.o
-obj-$(CONFIG_ARCH_IOP32X) += pci.o
-obj-$(CONFIG_ARCH_IOP32X) += setup.o
-obj-$(CONFIG_ARCH_IOP32X) += time.o
-obj-$(CONFIG_ARCH_IOP32X) += cp6.o
-obj-$(CONFIG_ARCH_IOP32X) += adma.o
-obj-$(CONFIG_ARCH_IOP32X) += pmu.o
-obj-$(CONFIG_ARCH_IOP32X) += restart.o
-
-obj-$(CONFIG_MACH_GLANTANK) += glantank.o
-obj-$(CONFIG_ARCH_IQ80321) += iq80321.o
-obj-$(CONFIG_ARCH_IQ31244) += iq31244.o
-obj-$(CONFIG_MACH_N2100) += n2100.o
-obj-$(CONFIG_MACH_EM7210) += em7210.o
diff --git a/arch/arm/mach-iop32x/Makefile.boot b/arch/arm/mach-iop32x/Makefile.boot
deleted file mode 100644
index 5c3af01c4000..000000000000
--- a/arch/arm/mach-iop32x/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0xa0008000
-params_phys-y	:= 0xa0000100
-initrd_phys-y	:= 0xa0800000
diff --git a/arch/arm/mach-iop32x/adma.c b/arch/arm/mach-iop32x/adma.c
deleted file mode 100644
index 764bcbff98df..000000000000
--- a/arch/arm/mach-iop32x/adma.c
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform device definitions for the iop3xx dma/xor engines
- * Copyright © 2006, Intel Corporation.
- */
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_data/dma-iop32x.h>
-
-#include "iop3xx.h"
-#include "irqs.h"
-
-#define IRQ_DMA0_EOT IRQ_IOP32X_DMA0_EOT
-#define IRQ_DMA0_EOC IRQ_IOP32X_DMA0_EOC
-#define IRQ_DMA0_ERR IRQ_IOP32X_DMA0_ERR
-
-#define IRQ_DMA1_EOT IRQ_IOP32X_DMA1_EOT
-#define IRQ_DMA1_EOC IRQ_IOP32X_DMA1_EOC
-#define IRQ_DMA1_ERR IRQ_IOP32X_DMA1_ERR
-
-#define IRQ_AA_EOT IRQ_IOP32X_AA_EOT
-#define IRQ_AA_EOC IRQ_IOP32X_AA_EOC
-#define IRQ_AA_ERR IRQ_IOP32X_AA_ERR
-
-/* AAU and DMA Channels */
-static struct resource iop3xx_dma_0_resources[] = {
-	[0] = {
-		.start = IOP3XX_DMA_PHYS_BASE(0),
-		.end = IOP3XX_DMA_UPPER_PA(0),
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_DMA0_EOT,
-		.end = IRQ_DMA0_EOT,
-		.flags = IORESOURCE_IRQ
-	},
-	[2] = {
-		.start = IRQ_DMA0_EOC,
-		.end = IRQ_DMA0_EOC,
-		.flags = IORESOURCE_IRQ
-	},
-	[3] = {
-		.start = IRQ_DMA0_ERR,
-		.end = IRQ_DMA0_ERR,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop3xx_dma_1_resources[] = {
-	[0] = {
-		.start = IOP3XX_DMA_PHYS_BASE(1),
-		.end = IOP3XX_DMA_UPPER_PA(1),
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_DMA1_EOT,
-		.end = IRQ_DMA1_EOT,
-		.flags = IORESOURCE_IRQ
-	},
-	[2] = {
-		.start = IRQ_DMA1_EOC,
-		.end = IRQ_DMA1_EOC,
-		.flags = IORESOURCE_IRQ
-	},
-	[3] = {
-		.start = IRQ_DMA1_ERR,
-		.end = IRQ_DMA1_ERR,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-
-static struct resource iop3xx_aau_resources[] = {
-	[0] = {
-		.start = IOP3XX_AAU_PHYS_BASE,
-		.end = IOP3XX_AAU_UPPER_PA,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_AA_EOT,
-		.end = IRQ_AA_EOT,
-		.flags = IORESOURCE_IRQ
-	},
-	[2] = {
-		.start = IRQ_AA_EOC,
-		.end = IRQ_AA_EOC,
-		.flags = IORESOURCE_IRQ
-	},
-	[3] = {
-		.start = IRQ_AA_ERR,
-		.end = IRQ_AA_ERR,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static u64 iop3xx_adma_dmamask = DMA_BIT_MASK(32);
-
-static struct iop_adma_platform_data iop3xx_dma_0_data = {
-	.hw_id = DMA0_ID,
-	.pool_size = PAGE_SIZE,
-};
-
-static struct iop_adma_platform_data iop3xx_dma_1_data = {
-	.hw_id = DMA1_ID,
-	.pool_size = PAGE_SIZE,
-};
-
-static struct iop_adma_platform_data iop3xx_aau_data = {
-	.hw_id = AAU_ID,
-	.pool_size = 3 * PAGE_SIZE,
-};
-
-struct platform_device iop3xx_dma_0_channel = {
-	.name = "iop-adma",
-	.id = 0,
-	.num_resources = 4,
-	.resource = iop3xx_dma_0_resources,
-	.dev = {
-		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = (void *) &iop3xx_dma_0_data,
-	},
-};
-
-struct platform_device iop3xx_dma_1_channel = {
-	.name = "iop-adma",
-	.id = 1,
-	.num_resources = 4,
-	.resource = iop3xx_dma_1_resources,
-	.dev = {
-		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = (void *) &iop3xx_dma_1_data,
-	},
-};
-
-struct platform_device iop3xx_aau_channel = {
-	.name = "iop-adma",
-	.id = 2,
-	.num_resources = 4,
-	.resource = iop3xx_aau_resources,
-	.dev = {
-		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = (void *) &iop3xx_aau_data,
-	},
-};
-
-static int __init iop3xx_adma_cap_init(void)
-{
-	dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask);
-	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
-
-	dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask);
-	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
-
-	dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask);
-	dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
-
-	return 0;
-}
-
-arch_initcall(iop3xx_adma_cap_init);
diff --git a/arch/arm/mach-iop32x/cp6.c b/arch/arm/mach-iop32x/cp6.c
deleted file mode 100644
index ec74b07fb7e3..000000000000
--- a/arch/arm/mach-iop32x/cp6.c
+++ /dev/null
@@ -1,38 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * IOP Coprocessor-6 access handler
- * Copyright (c) 2006, Intel Corporation.
- */
-#include <linux/init.h>
-#include <asm/traps.h>
-#include <asm/ptrace.h>
-
-static int cp6_trap(struct pt_regs *regs, unsigned int instr)
-{
-	u32 temp;
-
-        /* enable cp6 access */
-        asm volatile (
-		"mrc	p15, 0, %0, c15, c1, 0\n\t"
-		"orr	%0, %0, #(1 << 6)\n\t"
-		"mcr	p15, 0, %0, c15, c1, 0\n\t"
-		: "=r"(temp));
-
-	return 0;
-}
-
-/* permit kernel space cp6 access
- * deny user space cp6 access
- */
-static struct undef_hook cp6_hook = {
-	.instr_mask     = 0x0f000ff0,
-	.instr_val      = 0x0e000610,
-	.cpsr_mask      = MODE_MASK,
-	.cpsr_val       = SVC_MODE,
-	.fn             = cp6_trap,
-};
-
-void __init iop_init_cp6_handler(void)
-{
-	register_undef_hook(&cp6_hook);
-}
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
deleted file mode 100644
index d43ced3cd4e7..000000000000
--- a/arch/arm/mach-iop32x/em7210.c
+++ /dev/null
@@ -1,231 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-iop32x/em7210.c
- *
- * Board support code for the Lanner EM7210 platforms.
- *
- * Based on arch/arm/mach-iop32x/iq31244.c file.
- *
- * Copyright (C) 2007 Arnaud Patard <arnaud.patard@rtp-net.org>
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-
-#include "hardware.h"
-#include "gpio-iop32x.h"
-#include "irqs.h"
-
-static void __init em7210_timer_init(void)
-{
-	/* http://www.kwaak.net/fotos/fotos-nas/slide_24.html */
-	/* 33.333 MHz crystal.                                */
-	iop_init_time(200000000);
-}
-
-/*
- * EM7210 RTC
- */
-static struct i2c_board_info __initdata em7210_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372a", 0x32),
-	},
-};
-
-/*
- * EM7210 I/O
- */
-static struct map_desc em7210_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= IQ31244_UART,
-		.pfn		= __phys_to_pfn(IQ31244_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init em7210_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(em7210_io_desc, ARRAY_SIZE(em7210_io_desc));
-}
-
-
-/*
- * EM7210 PCI
- */
-#define INTA	IRQ_IOP32X_XINT0
-#define INTB	IRQ_IOP32X_XINT1
-#define INTC	IRQ_IOP32X_XINT2
-#define INTD	IRQ_IOP32X_XINT3
-
-static int __init
-em7210_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-		{INTB, INTB, INTB, INTB}, /* console / uart */
-		{INTA, INTA, INTA, INTA}, /* 1st 82541      */
-		{INTD, INTD, INTD, INTD}, /* 2nd 82541      */
-		{INTC, INTC, INTC, INTC}, /* GD31244        */
-		{INTD, INTA, INTA, INTA}, /* mini-PCI       */
-		{INTD, INTC, INTA, INTA}, /* NEC USB        */
-	};
-
-	if (pin < 1 || pin > 4)
-		return -1;
-
-	return pci_irq_table[slot % 6][pin - 1];
-}
-
-static struct hw_pci em7210_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= em7210_pci_map_irq,
-};
-
-static int __init em7210_pci_init(void)
-{
-	if (machine_is_em7210())
-		pci_common_init(&em7210_pci);
-
-	return 0;
-}
-
-subsys_initcall(em7210_pci_init);
-
-
-/*
- * EM7210 Flash
- */
-static struct physmap_flash_data em7210_flash_data = {
-	.width		= 2,
-};
-
-static struct resource em7210_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf1ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device em7210_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &em7210_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &em7210_flash_resource,
-};
-
-
-/*
- * EM7210 UART
- * The physical address of the serial port is 0xfe800000,
- * so it can be used for physical and virtual address.
- */
-static struct plat_serial8250_port em7210_serial_port[] = {
-	{
-		.mapbase	= IQ31244_UART,
-		.membase	= (char *)IQ31244_UART,
-		.irq		= IRQ_IOP32X_XINT1,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource em7210_uart_resource = {
-	.start		= IQ31244_UART,
-	.end		= IQ31244_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device em7210_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= em7210_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &em7210_uart_resource,
-};
-
-#define EM7210_HARDWARE_POWER 0
-
-void em7210_power_off(void)
-{
-	int ret;
-
-	ret = gpio_direction_output(EM7210_HARDWARE_POWER, 1);
-	if (ret)
-		pr_crit("could not drive power off GPIO high\n");
-}
-
-static int __init em7210_request_gpios(void)
-{
-	int ret;
-
-	if (!machine_is_em7210())
-		return 0;
-
-	ret = gpio_request(EM7210_HARDWARE_POWER, "power");
-	if (ret) {
-		pr_err("could not request power off GPIO\n");
-		return 0;
-	}
-
-	pm_power_off = em7210_power_off;
-
-	return 0;
-}
-device_initcall(em7210_request_gpios);
-
-static void __init em7210_init_machine(void)
-{
-	register_iop32x_gpio();
-	platform_device_register(&em7210_serial_device);
-	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
-	gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&em7210_flash_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	i2c_register_board_info(0, em7210_i2c_devices,
-		ARRAY_SIZE(em7210_i2c_devices));
-}
-
-MACHINE_START(EM7210, "Lanner EM7210")
-	.atag_offset	= 0x100,
-	.map_io		= em7210_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= em7210_timer_init,
-	.init_machine	= em7210_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
deleted file mode 100644
index 2fe0f77d1f1d..000000000000
--- a/arch/arm/mach-iop32x/glantank.c
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/glantank.c
- *
- * Board support code for the GLAN Tank.
- *
- * Copyright (C) 2006, 2007 Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/f75375s.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "gpio-iop32x.h"
-#include "irqs.h"
-
-/*
- * GLAN Tank timer tick configuration.
- */
-static void __init glantank_timer_init(void)
-{
-	/* 33.333 MHz crystal.  */
-	iop_init_time(200000000);
-}
-
-
-/*
- * GLAN Tank I/O.
- */
-static struct map_desc glantank_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= GLANTANK_UART,
-		.pfn		= __phys_to_pfn(GLANTANK_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init glantank_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(glantank_io_desc, ARRAY_SIZE(glantank_io_desc));
-}
-
-
-/*
- * GLAN Tank PCI.
- */
-#define INTA	IRQ_IOP32X_XINT0
-#define INTB	IRQ_IOP32X_XINT1
-#define INTC	IRQ_IOP32X_XINT2
-#define INTD	IRQ_IOP32X_XINT3
-
-static int __init
-glantank_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-		{INTD, INTD, INTD, INTD}, /* UART (8250) */
-		{INTA, INTA, INTA, INTA}, /* Ethernet (E1000) */
-		{INTB, INTB, INTB, INTB}, /* IDE (AEC6280R) */
-		{INTC, INTC, INTC, INTC}, /* USB (NEC) */
-	};
-
-	BUG_ON(pin < 1 || pin > 4);
-
-	return pci_irq_table[slot % 4][pin - 1];
-}
-
-static struct hw_pci glantank_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= glantank_pci_map_irq,
-};
-
-static int __init glantank_pci_init(void)
-{
-	if (machine_is_glantank())
-		pci_common_init(&glantank_pci);
-
-	return 0;
-}
-
-subsys_initcall(glantank_pci_init);
-
-
-/*
- * GLAN Tank machine initialization.
- */
-static struct physmap_flash_data glantank_flash_data = {
-	.width		= 2,
-};
-
-static struct resource glantank_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf007ffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device glantank_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &glantank_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &glantank_flash_resource,
-};
-
-static struct plat_serial8250_port glantank_serial_port[] = {
-	{
-		.mapbase	= GLANTANK_UART,
-		.membase	= (char *)GLANTANK_UART,
-		.irq		= IRQ_IOP32X_XINT3,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource glantank_uart_resource = {
-	.start		= GLANTANK_UART,
-	.end		= GLANTANK_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device glantank_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= glantank_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &glantank_uart_resource,
-};
-
-static struct f75375s_platform_data glantank_f75375s = {
-	.pwm		= { 255, 255 },
-	.pwm_enable	= { 0, 0 },
-};
-
-static struct i2c_board_info __initdata glantank_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372a", 0x32),
-	},
-	{
-		I2C_BOARD_INFO("f75375", 0x2e),
-		.platform_data = &glantank_f75375s,
-	},
-};
-
-static void glantank_power_off(void)
-{
-	__raw_writeb(0x01, IOMEM(0xfe8d0004));
-
-	while (1)
-		;
-}
-
-static void __init glantank_init_machine(void)
-{
-	register_iop32x_gpio();
-	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
-	gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&glantank_flash_device);
-	platform_device_register(&glantank_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	i2c_register_board_info(0, glantank_i2c_devices,
-		ARRAY_SIZE(glantank_i2c_devices));
-
-	pm_power_off = glantank_power_off;
-}
-
-MACHINE_START(GLANTANK, "GLAN Tank")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.map_io		= glantank_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= glantank_timer_init,
-	.init_machine	= glantank_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.h b/arch/arm/mach-iop32x/glantank.h
deleted file mode 100644
index f38e86b82c3d..000000000000
--- a/arch/arm/mach-iop32x/glantank.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * IO-Data GLAN Tank board registers
- */
-
-#ifndef __GLANTANK_H
-#define __GLANTANK_H
-
-#define GLANTANK_UART		0xfe800000	/* UART */
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/gpio-iop32x.h b/arch/arm/mach-iop32x/gpio-iop32x.h
deleted file mode 100644
index 20af87e4c5e8..000000000000
--- a/arch/arm/mach-iop32x/gpio-iop32x.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-static struct resource iop32x_gpio_res[] = {
-	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x07c4), 0x10),
-};
-
-static inline void register_iop32x_gpio(void)
-{
-	platform_device_register_simple("gpio-iop", 0,
-					iop32x_gpio_res,
-					ARRAY_SIZE(iop32x_gpio_res));
-}
diff --git a/arch/arm/mach-iop32x/hardware.h b/arch/arm/mach-iop32x/hardware.h
deleted file mode 100644
index 43ab4fb8f9b0..000000000000
--- a/arch/arm/mach-iop32x/hardware.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __HARDWARE_H
-#define __HARDWARE_H
-
-#include <asm/types.h>
-
-/*
- * Note about PCI IO space mappings
- *
- * To make IO space accesses efficient, we store virtual addresses in
- * the IO resources.
- *
- * The PCI IO space is located at virtual 0xfe000000 from physical
- * 0x90000000. The PCI BARs must be programmed with physical addresses,
- * but when we read them, we convert them to virtual addresses. See
- * arch/arm/plat-iop/pci.c.
- */
-
-#ifndef __ASSEMBLY__
-void iop32x_init_irq(void);
-#endif
-
-
-/*
- * Generic chipset bits
- */
-#include "iop3xx.h"
-
-/*
- * Board specific bits
- */
-#include "glantank.h"
-#include "iq80321.h"
-#include "iq31244.h"
-#include "n2100.h"
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/i2c.c b/arch/arm/mach-iop32x/i2c.c
deleted file mode 100644
index e422286af469..000000000000
--- a/arch/arm/mach-iop32x/i2c.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/plat-iop/i2c.c
- *
- * Author: Nicolas Pitre <nico@cam.org>
- * Copyright (C) 2001 MontaVista Software, Inc.
- * Copyright (C) 2004 Intel Corporation.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach/arch.h>
-
-#include "hardware.h"
-#include "iop3xx.h"
-#include "irqs.h"
-
-/*
- * Each of the I2C busses have corresponding GPIO lines, and the driver
- * need to access these directly to drive the bus low at times.
- */
-
-struct gpiod_lookup_table iop3xx_i2c0_gpio_lookup = {
-	.dev_id = "IOP3xx-I2C.0",
-	.table = {
-		GPIO_LOOKUP("gpio-iop", 7, "scl", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-iop", 6, "sda", GPIO_ACTIVE_HIGH),
-		{ }
-	},
-};
-
-struct gpiod_lookup_table iop3xx_i2c1_gpio_lookup = {
-	.dev_id = "IOP3xx-I2C.1",
-	.table = {
-		GPIO_LOOKUP("gpio-iop", 5, "scl", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-iop", 4, "sda", GPIO_ACTIVE_HIGH),
-		{ }
-	},
-};
-
-static struct resource iop3xx_i2c0_resources[] = {
-	[0] = {
-		.start	= 0xfffff680,
-		.end	= 0xfffff697,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_IOP32X_I2C_0,
-		.end	= IRQ_IOP32X_I2C_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device iop3xx_i2c0_device = {
-	.name		= "IOP3xx-I2C",
-	.id		= 0,
-	.num_resources	= 2,
-	.resource	= iop3xx_i2c0_resources,
-};
-
-
-static struct resource iop3xx_i2c1_resources[] = {
-	[0] = {
-		.start	= 0xfffff6a0,
-		.end	= 0xfffff6b7,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_IOP32X_I2C_1,
-		.end	= IRQ_IOP32X_I2C_1,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device iop3xx_i2c1_device = {
-	.name		= "IOP3xx-I2C",
-	.id		= 1,
-	.num_resources	= 2,
-	.resource	= iop3xx_i2c1_resources,
-};
diff --git a/arch/arm/mach-iop32x/include/mach/entry-macro.S b/arch/arm/mach-iop32x/include/mach/entry-macro.S
deleted file mode 100644
index 8e6766d4621e..000000000000
--- a/arch/arm/mach-iop32x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for IOP32x-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-	.macro get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c15, c1, 0
-	orr	\tmp, \tmp, #(1 << 6)
-	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
-	mrc	p15, 0, \tmp, c15, c1, 0
-	mov	\tmp, \tmp
-	sub	pc, pc, #4			@ cp_wait
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	mrc     p6, 0, \irqstat, c8, c0, 0	@ Read IINTSRC
-	cmp     \irqstat, #0
-	clzne   \irqnr, \irqstat
-	rsbne   \irqnr, \irqnr, #31
-	.endm
-
-	.macro arch_ret_to_user, tmp1, tmp2
-	mrc	p15, 0, \tmp1, c15, c1, 0
-	ands	\tmp2, \tmp1, #(1 << 6)
-	bicne	\tmp1, \tmp1, #(1 << 6)
-	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
-	.endm
diff --git a/arch/arm/mach-iop32x/include/mach/irqs.h b/arch/arm/mach-iop32x/include/mach/irqs.h
deleted file mode 100644
index c4e78df428e8..000000000000
--- a/arch/arm/mach-iop32x/include/mach/irqs.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-iop32x/include/mach/irqs.h
- *
- * Author:	Rory Bolt <rorybolt@pacbell.net>
- * Copyright:	(C) 2002 Rory Bolt
- */
-
-#ifndef __IRQS_H
-#define __IRQS_H
-
-#define NR_IRQS			32
-
-#endif
diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h
deleted file mode 100644
index c8548875d942..000000000000
--- a/arch/arm/mach-iop32x/include/mach/uncompress.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-iop32x/include/mach/uncompress.h
- */
-
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-
-#define uart_base ((volatile u8 *)0xfe800000)
-
-#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-	uart_base[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup() do { } while (0)
diff --git a/arch/arm/mach-iop32x/iop3xx.h b/arch/arm/mach-iop32x/iop3xx.h
deleted file mode 100644
index 46b4b34a4ad2..000000000000
--- a/arch/arm/mach-iop32x/iop3xx.h
+++ /dev/null
@@ -1,325 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Intel IOP32X and IOP33X register definitions
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- */
-
-#ifndef __IOP3XX_H
-#define __IOP3XX_H
-
-/*
- * Peripherals that are shared between the iop32x and iop33x but
- * located at different addresses.
- */
-#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
-
-#include "iop3xx.h"
-
-/* ATU Parameters
- * set up a 1:1 bus to physical ram relationship
- * w/ physical ram on top of pci in the memory map
- */
-#define IOP32X_MAX_RAM_SIZE            0x40000000UL
-#define IOP3XX_MAX_RAM_SIZE            IOP32X_MAX_RAM_SIZE
-#define IOP3XX_PCI_LOWER_MEM_BA        0x80000000
-
-/*
- * IOP3XX GPIO handling
- */
-#define IOP3XX_GPIO_LINE(x)	(x)
-
-#ifndef __ASSEMBLY__
-extern int init_atu;
-extern int iop3xx_get_init_atu(void);
-#endif
-
-
-/*
- * IOP3XX processor registers
- */
-#define IOP3XX_PERIPHERAL_PHYS_BASE	0xffffe000
-#define IOP3XX_PERIPHERAL_VIRT_BASE	0xfedfe000
-#define IOP3XX_PERIPHERAL_SIZE		0x00002000
-#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\
-					IOP3XX_PERIPHERAL_SIZE - 1)
-#define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\
-					IOP3XX_PERIPHERAL_SIZE - 1)
-#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) (addr) -\
-					(IOP3XX_PERIPHERAL_PHYS_BASE\
-					- IOP3XX_PERIPHERAL_VIRT_BASE))
-#define IOP3XX_REG_ADDR(reg)		(IOP3XX_PERIPHERAL_VIRT_BASE + (reg))
-
-/* Address Translation Unit  */
-#define IOP3XX_ATUVID		(volatile u16 *)IOP3XX_REG_ADDR(0x0100)
-#define IOP3XX_ATUDID		(volatile u16 *)IOP3XX_REG_ADDR(0x0102)
-#define IOP3XX_ATUCMD		(volatile u16 *)IOP3XX_REG_ADDR(0x0104)
-#define IOP3XX_ATUSR		(volatile u16 *)IOP3XX_REG_ADDR(0x0106)
-#define IOP3XX_ATURID		(volatile u8  *)IOP3XX_REG_ADDR(0x0108)
-#define IOP3XX_ATUCCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0109)
-#define IOP3XX_ATUCLSR		(volatile u8  *)IOP3XX_REG_ADDR(0x010c)
-#define IOP3XX_ATULT		(volatile u8  *)IOP3XX_REG_ADDR(0x010d)
-#define IOP3XX_ATUHTR		(volatile u8  *)IOP3XX_REG_ADDR(0x010e)
-#define IOP3XX_ATUBIST		(volatile u8  *)IOP3XX_REG_ADDR(0x010f)
-#define IOP3XX_IABAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0110)
-#define IOP3XX_IAUBAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0114)
-#define IOP3XX_IABAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0118)
-#define IOP3XX_IAUBAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x011c)
-#define IOP3XX_IABAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0120)
-#define IOP3XX_IAUBAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0124)
-#define IOP3XX_ASVIR		(volatile u16 *)IOP3XX_REG_ADDR(0x012c)
-#define IOP3XX_ASIR		(volatile u16 *)IOP3XX_REG_ADDR(0x012e)
-#define IOP3XX_ERBAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0130)
-#define IOP3XX_ATUILR		(volatile u8  *)IOP3XX_REG_ADDR(0x013c)
-#define IOP3XX_ATUIPR		(volatile u8  *)IOP3XX_REG_ADDR(0x013d)
-#define IOP3XX_ATUMGNT		(volatile u8  *)IOP3XX_REG_ADDR(0x013e)
-#define IOP3XX_ATUMLAT		(volatile u8  *)IOP3XX_REG_ADDR(0x013f)
-#define IOP3XX_IALR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0140)
-#define IOP3XX_IATVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0144)
-#define IOP3XX_ERLR		(volatile u32 *)IOP3XX_REG_ADDR(0x0148)
-#define IOP3XX_ERTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x014c)
-#define IOP3XX_IALR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0150)
-#define IOP3XX_IALR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0154)
-#define IOP3XX_IATVR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0158)
-#define IOP3XX_OIOWTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x015c)
-#define IOP3XX_OMWTVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0160)
-#define IOP3XX_OUMWTVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0164)
-#define IOP3XX_OMWTVR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0168)
-#define IOP3XX_OUMWTVR1		(volatile u32 *)IOP3XX_REG_ADDR(0x016c)
-#define IOP3XX_OUDWTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x0178)
-#define IOP3XX_ATUCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0180)
-#define IOP3XX_PCSR		(volatile u32 *)IOP3XX_REG_ADDR(0x0184)
-#define IOP3XX_ATUISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0188)
-#define IOP3XX_ATUIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x018c)
-#define IOP3XX_IABAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0190)
-#define IOP3XX_IAUBAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0194)
-#define IOP3XX_IALR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0198)
-#define IOP3XX_IATVR3		(volatile u32 *)IOP3XX_REG_ADDR(0x019c)
-#define IOP3XX_OCCAR		(volatile u32 *)IOP3XX_REG_ADDR(0x01a4)
-#define IOP3XX_OCCDR		(volatile u32 *)IOP3XX_REG_ADDR(0x01ac)
-#define IOP3XX_PDSCR		(volatile u32 *)IOP3XX_REG_ADDR(0x01bc)
-#define IOP3XX_PMCAPID		(volatile u8  *)IOP3XX_REG_ADDR(0x01c0)
-#define IOP3XX_PMNEXT		(volatile u8  *)IOP3XX_REG_ADDR(0x01c1)
-#define IOP3XX_APMCR		(volatile u16 *)IOP3XX_REG_ADDR(0x01c2)
-#define IOP3XX_APMCSR		(volatile u16 *)IOP3XX_REG_ADDR(0x01c4)
-#define IOP3XX_PCIXCAPID	(volatile u8  *)IOP3XX_REG_ADDR(0x01e0)
-#define IOP3XX_PCIXNEXT		(volatile u8  *)IOP3XX_REG_ADDR(0x01e1)
-#define IOP3XX_PCIXCMD		(volatile u16 *)IOP3XX_REG_ADDR(0x01e2)
-#define IOP3XX_PCIXSR		(volatile u32 *)IOP3XX_REG_ADDR(0x01e4)
-#define IOP3XX_PCIIRSR		(volatile u32 *)IOP3XX_REG_ADDR(0x01ec)
-#define IOP3XX_PCSR_OUT_Q_BUSY (1 << 15)
-#define IOP3XX_PCSR_IN_Q_BUSY	(1 << 14)
-#define IOP3XX_ATUCR_OUT_EN	(1 << 1)
-
-#define IOP3XX_INIT_ATU_DEFAULT 0
-#define IOP3XX_INIT_ATU_DISABLE -1
-#define IOP3XX_INIT_ATU_ENABLE	 1
-
-/* Messaging Unit  */
-#define IOP3XX_IMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0310)
-#define IOP3XX_IMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0314)
-#define IOP3XX_OMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0318)
-#define IOP3XX_OMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x031c)
-#define IOP3XX_IDR		(volatile u32 *)IOP3XX_REG_ADDR(0x0320)
-#define IOP3XX_IISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0324)
-#define IOP3XX_IIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0328)
-#define IOP3XX_ODR		(volatile u32 *)IOP3XX_REG_ADDR(0x032c)
-#define IOP3XX_OISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0330)
-#define IOP3XX_OIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0334)
-#define IOP3XX_MUCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0350)
-#define IOP3XX_QBAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0354)
-#define IOP3XX_IFHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0360)
-#define IOP3XX_IFTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0364)
-#define IOP3XX_IPHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0368)
-#define IOP3XX_IPTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x036c)
-#define IOP3XX_OFHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0370)
-#define IOP3XX_OFTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0374)
-#define IOP3XX_OPHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0378)
-#define IOP3XX_OPTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x037c)
-#define IOP3XX_IAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0380)
-
-/* DMA Controller  */
-#define IOP3XX_DMA_PHYS_BASE(chan) (IOP3XX_PERIPHERAL_PHYS_BASE + \
-					(0x400 + (chan << 6)))
-#define IOP3XX_DMA_UPPER_PA(chan)  (IOP3XX_DMA_PHYS_BASE(chan) + 0x27)
-
-/* Peripheral bus interface  */
-#define IOP3XX_PBCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0680)
-#define IOP3XX_PBISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0684)
-#define IOP3XX_PBBAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0688)
-#define IOP3XX_PBLR0		(volatile u32 *)IOP3XX_REG_ADDR(0x068c)
-#define IOP3XX_PBBAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0690)
-#define IOP3XX_PBLR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0694)
-#define IOP3XX_PBBAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0698)
-#define IOP3XX_PBLR2		(volatile u32 *)IOP3XX_REG_ADDR(0x069c)
-#define IOP3XX_PBBAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x06a0)
-#define IOP3XX_PBLR3		(volatile u32 *)IOP3XX_REG_ADDR(0x06a4)
-#define IOP3XX_PBBAR4		(volatile u32 *)IOP3XX_REG_ADDR(0x06a8)
-#define IOP3XX_PBLR4		(volatile u32 *)IOP3XX_REG_ADDR(0x06ac)
-#define IOP3XX_PBBAR5		(volatile u32 *)IOP3XX_REG_ADDR(0x06b0)
-#define IOP3XX_PBLR5		(volatile u32 *)IOP3XX_REG_ADDR(0x06b4)
-#define IOP3XX_PMBR0		(volatile u32 *)IOP3XX_REG_ADDR(0x06c0)
-#define IOP3XX_PMBR1		(volatile u32 *)IOP3XX_REG_ADDR(0x06e0)
-#define IOP3XX_PMBR2		(volatile u32 *)IOP3XX_REG_ADDR(0x06e4)
-
-/* Peripheral performance monitoring unit  */
-#define IOP3XX_GTMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0700)
-#define IOP3XX_ESR		(volatile u32 *)IOP3XX_REG_ADDR(0x0704)
-#define IOP3XX_EMISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0708)
-#define IOP3XX_GTSR		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
-/* PERCR0 DOESN'T EXIST - index from 1! */
-#define IOP3XX_PERCR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
-
-/* Timers  */
-#define IOP3XX_TU_TMR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0000)
-#define IOP3XX_TU_TMR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0004)
-#define IOP3XX_TU_TCR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0008)
-#define IOP3XX_TU_TCR1		(volatile u32 *)IOP3XX_TIMER_REG(0x000c)
-#define IOP3XX_TU_TRR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0010)
-#define IOP3XX_TU_TRR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0014)
-#define IOP3XX_TU_TISR		(volatile u32 *)IOP3XX_TIMER_REG(0x0018)
-#define IOP3XX_TU_WDTCR		(volatile u32 *)IOP3XX_TIMER_REG(0x001c)
-#define IOP_TMR_EN	    0x02
-#define IOP_TMR_RELOAD	    0x04
-#define IOP_TMR_PRIVILEGED 0x08
-#define IOP_TMR_RATIO_1_1  0x00
-
-/* Watchdog timer definitions */
-#define IOP_WDTCR_EN_ARM        0x1e1e1e1e
-#define IOP_WDTCR_EN            0xe1e1e1e1
-/* iop3xx does not support stopping the watchdog, so we just re-arm */
-#define IOP_WDTCR_DIS_ARM	(IOP_WDTCR_EN_ARM)
-#define IOP_WDTCR_DIS		(IOP_WDTCR_EN)
-
-/* Application accelerator unit  */
-#define IOP3XX_AAU_PHYS_BASE (IOP3XX_PERIPHERAL_PHYS_BASE + 0x800)
-#define IOP3XX_AAU_UPPER_PA (IOP3XX_AAU_PHYS_BASE + 0xa7)
-
-/* I2C bus interface unit  */
-#define IOP3XX_ICR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1680)
-#define IOP3XX_ISR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1684)
-#define IOP3XX_ISAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1688)
-#define IOP3XX_IDBR0		(volatile u32 *)IOP3XX_REG_ADDR(0x168c)
-#define IOP3XX_IBMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1694)
-#define IOP3XX_ICR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a0)
-#define IOP3XX_ISR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a4)
-#define IOP3XX_ISAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a8)
-#define IOP3XX_IDBR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16ac)
-#define IOP3XX_IBMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16b4)
-
-
-/*
- * IOP3XX I/O and Mem space regions for PCI autoconfiguration
- */
-#define IOP3XX_PCI_LOWER_MEM_PA	0x80000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE	0x08000000
-
-#define IOP3XX_PCI_LOWER_IO_PA		0x90000000
-#define IOP3XX_PCI_LOWER_IO_BA		0x00000000
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <linux/reboot.h>
-
-void iop3xx_map_io(void);
-void iop_init_cp6_handler(void);
-void iop_init_time(unsigned long tickrate);
-void iop3xx_restart(enum reboot_mode, const char *);
-
-static inline u32 read_tmr0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c0, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_tmr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (val));
-}
-
-static inline void write_tmr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c2, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_tcr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c2, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr1(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c3, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_tcr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c3, c1, 0" : : "r" (val));
-}
-
-static inline void write_trr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val));
-}
-
-static inline void write_trr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (val));
-}
-
-static inline void write_tisr(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_wdtcr(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c7, c1, 0":"=r" (val));
-	return val;
-}
-static inline void write_wdtcr(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c7, c1, 0"::"r" (val));
-}
-
-extern unsigned long get_iop_tick_rate(void);
-
-/* only iop13xx has these registers, we define these to present a
- * common register interface for the iop_wdt driver.
- */
-#define IOP_RCSR_WDT	(0)
-static inline u32 read_rcsr(void)
-{
-	return 0;
-}
-static inline void write_wdtsr(u32 val)
-{
-	do { } while (0);
-}
-
-extern struct platform_device iop3xx_dma_0_channel;
-extern struct platform_device iop3xx_dma_1_channel;
-extern struct platform_device iop3xx_aau_channel;
-extern struct platform_device iop3xx_i2c0_device;
-extern struct platform_device iop3xx_i2c1_device;
-extern struct gpiod_lookup_table iop3xx_i2c0_gpio_lookup;
-extern struct gpiod_lookup_table iop3xx_i2c1_gpio_lookup;
-
-#endif
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
deleted file mode 100644
index 49caaa703881..000000000000
--- a/arch/arm/mach-iop32x/iq31244.c
+++ /dev/null
@@ -1,332 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/iq31244.c
- *
- * Board support code for the Intel EP80219 and IQ31244 platforms.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright 2003 (c) MontaVista, Software, Inc.
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/cputype.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "irqs.h"
-#include "gpio-iop32x.h"
-
-/*
- * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
- * same machine id, and the processor type was used to select board type.
- * However this assumption breaks for an iq80219 board which is an iop219
- * processor on an iq31244 board.  The force_ep80219 flag has been added
- * for old boot loaders using the iq31244 machine id for an ep80219 platform.
- */
-static int force_ep80219;
-
-static int is_80219(void)
-{
-	return !!((read_cpuid_id() & 0xffffffe0) == 0x69052e20);
-}
-
-static int is_ep80219(void)
-{
-	if (machine_is_ep80219() || force_ep80219)
-		return 1;
-	else
-		return 0;
-}
-
-
-/*
- * EP80219/IQ31244 timer tick configuration.
- */
-static void __init iq31244_timer_init(void)
-{
-	if (is_ep80219()) {
-		/* 33.333 MHz crystal.  */
-		iop_init_time(200000000);
-	} else {
-		/* 33.000 MHz crystal.  */
-		iop_init_time(198000000);
-	}
-}
-
-
-/*
- * IQ31244 I/O.
- */
-static struct map_desc iq31244_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= IQ31244_UART,
-		.pfn		= __phys_to_pfn(IQ31244_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init iq31244_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
-}
-
-
-/*
- * EP80219/IQ31244 PCI.
- */
-static int __init
-ep80219_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (slot == 0) {
-		/* CFlash */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (slot == 1) {
-		/* 82551 Pro 100 */
-		irq = IRQ_IOP32X_XINT0;
-	} else if (slot == 2) {
-		/* PCI-X Slot */
-		irq = IRQ_IOP32X_XINT3;
-	} else if (slot == 3) {
-		/* SATA */
-		irq = IRQ_IOP32X_XINT2;
-	} else {
-		printk(KERN_ERR "ep80219_pci_map_irq() called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci ep80219_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= ep80219_pci_map_irq,
-};
-
-static int __init
-iq31244_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (slot == 0) {
-		/* CFlash */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (slot == 1) {
-		/* SATA */
-		irq = IRQ_IOP32X_XINT2;
-	} else if (slot == 2) {
-		/* PCI-X Slot */
-		irq = IRQ_IOP32X_XINT3;
-	} else if (slot == 3) {
-		/* 82546 GigE */
-		irq = IRQ_IOP32X_XINT0;
-	} else {
-		printk(KERN_ERR "iq31244_pci_map_irq called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci iq31244_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= iq31244_pci_map_irq,
-};
-
-static int __init iq31244_pci_init(void)
-{
-	if (is_ep80219())
-		pci_common_init(&ep80219_pci);
-	else if (machine_is_iq31244()) {
-		if (is_80219()) {
-			printk("note: iq31244 board type has been selected\n");
-			printk("note: to select ep80219 operation:\n");
-			printk("\t1/ specify \"force_ep80219\" on the kernel"
-				" command line\n");
-			printk("\t2/ update boot loader to pass"
-				" the ep80219 id: %d\n", MACH_TYPE_EP80219);
-		}
-		pci_common_init(&iq31244_pci);
-	}
-
-	return 0;
-}
-
-subsys_initcall(iq31244_pci_init);
-
-
-/*
- * IQ31244 machine initialisation.
- */
-static struct physmap_flash_data iq31244_flash_data = {
-	.width		= 2,
-};
-
-static struct resource iq31244_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf07fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq31244_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &iq31244_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &iq31244_flash_resource,
-};
-
-static struct plat_serial8250_port iq31244_serial_port[] = {
-	{
-		.mapbase	= IQ31244_UART,
-		.membase	= (char *)IQ31244_UART,
-		.irq		= IRQ_IOP32X_XINT1,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource iq31244_uart_resource = {
-	.start		= IQ31244_UART,
-	.end		= IQ31244_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq31244_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= iq31244_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &iq31244_uart_resource,
-};
-
-/*
- * This function will send a SHUTDOWN_COMPLETE message to the PIC
- * controller over I2C.  We are not using the i2c subsystem since
- * we are going to power off and it may be removed
- */
-void ep80219_power_off(void)
-{
-	/*
-	 * Send the Address byte w/ the start condition
-	 */
-	*IOP3XX_IDBR1 = 0x60;
-	*IOP3XX_ICR1 = 0xE9;
-	mdelay(1);
-
-	/*
-	 * Send the START_MSG byte w/ no start or stop condition
-	 */
-	*IOP3XX_IDBR1 = 0x0F;
-	*IOP3XX_ICR1 = 0xE8;
-	mdelay(1);
-
-	/*
-	 * Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or
-	 * stop condition
-	 */
-	*IOP3XX_IDBR1 = 0x03;
-	*IOP3XX_ICR1 = 0xE8;
-	mdelay(1);
-
-	/*
-	 * Send an ignored byte w/ stop condition
-	 */
-	*IOP3XX_IDBR1 = 0x00;
-	*IOP3XX_ICR1 = 0xEA;
-
-	while (1)
-		;
-}
-
-static void __init iq31244_init_machine(void)
-{
-	register_iop32x_gpio();
-	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
-	gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&iq31244_flash_device);
-	platform_device_register(&iq31244_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	if (is_ep80219())
-		pm_power_off = ep80219_power_off;
-
-	if (!is_80219())
-		platform_device_register(&iop3xx_aau_channel);
-}
-
-static int __init force_ep80219_setup(char *str)
-{
-	force_ep80219 = 1;
-	return 1;
-}
-
-__setup("force_ep80219", force_ep80219_setup);
-
-MACHINE_START(IQ31244, "Intel IQ31244")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.map_io		= iq31244_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= iq31244_timer_init,
-	.init_machine	= iq31244_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
-
-/* There should have been an ep80219 machine identifier from the beginning.
- * Boot roms older than March 2007 do not know the ep80219 machine id.  Pass
- * "force_ep80219" on the kernel command line, otherwise iq31244 operation
- * will be selected.
- */
-MACHINE_START(EP80219, "Intel EP80219")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.map_io		= iq31244_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= iq31244_timer_init,
-	.init_machine	= iq31244_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq31244.h b/arch/arm/mach-iop32x/iq31244.h
deleted file mode 100644
index a7ac691e48d3..000000000000
--- a/arch/arm/mach-iop32x/iq31244.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Intel IQ31244 evaluation board registers
- */
-
-#ifndef __IQ31244_H
-#define __IQ31244_H
-
-#define IQ31244_UART		0xfe800000	/* UART #1 */
-#define IQ31244_7SEG_1		0xfe840000	/* 7-Segment MSB */
-#define IQ31244_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
-#define IQ31244_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
-#define IQ31244_BATT_STAT	0xfe8f0000	/* Battery Status */
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
deleted file mode 100644
index b455d7073296..000000000000
--- a/arch/arm/mach-iop32x/iq80321.c
+++ /dev/null
@@ -1,191 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/iq80321.c
- *
- * Board support code for the Intel IQ80321 platform.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "irqs.h"
-#include "gpio-iop32x.h"
-
-/*
- * IQ80321 timer tick configuration.
- */
-static void __init iq80321_timer_init(void)
-{
-	/* 33.333 MHz crystal.  */
-	iop_init_time(200000000);
-}
-
-
-/*
- * IQ80321 I/O.
- */
-static struct map_desc iq80321_io_desc[] __initdata = {
- 	{	/* on-board devices */
-		.virtual	= IQ80321_UART,
-		.pfn		= __phys_to_pfn(IQ80321_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init iq80321_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
-}
-
-
-/*
- * IQ80321 PCI.
- */
-static int __init
-iq80321_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if ((slot == 2 || slot == 6) && pin == 1) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP32X_XINT2;
-	} else if ((slot == 2 || slot == 6) && pin == 2) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP32X_XINT3;
-	} else if ((slot == 2 || slot == 6) && pin == 3) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP32X_XINT0;
-	} else if ((slot == 2 || slot == 6) && pin == 4) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (slot == 4 || slot == 8) {
-		/* Gig-E */
-		irq = IRQ_IOP32X_XINT0;
-	} else {
-		printk(KERN_ERR "iq80321_pci_map_irq() called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci iq80321_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit_cond,
-	.map_irq	= iq80321_pci_map_irq,
-};
-
-static int __init iq80321_pci_init(void)
-{
-	if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
-		machine_is_iq80321())
-		pci_common_init(&iq80321_pci);
-
-	return 0;
-}
-
-subsys_initcall(iq80321_pci_init);
-
-
-/*
- * IQ80321 machine initialisation.
- */
-static struct physmap_flash_data iq80321_flash_data = {
-	.width		= 1,
-};
-
-static struct resource iq80321_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf07fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq80321_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &iq80321_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &iq80321_flash_resource,
-};
-
-static struct plat_serial8250_port iq80321_serial_port[] = {
-	{
-		.mapbase	= IQ80321_UART,
-		.membase	= (char *)IQ80321_UART,
-		.irq		= IRQ_IOP32X_XINT1,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource iq80321_uart_resource = {
-	.start		= IQ80321_UART,
-	.end		= IQ80321_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq80321_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= iq80321_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &iq80321_uart_resource,
-};
-
-static void __init iq80321_init_machine(void)
-{
-	register_iop32x_gpio();
-	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
-	gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&iq80321_flash_device);
-	platform_device_register(&iq80321_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-	platform_device_register(&iop3xx_aau_channel);
-}
-
-MACHINE_START(IQ80321, "Intel IQ80321")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.map_io		= iq80321_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= iq80321_timer_init,
-	.init_machine	= iq80321_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq80321.h b/arch/arm/mach-iop32x/iq80321.h
deleted file mode 100644
index 3a5d10626ea6..000000000000
--- a/arch/arm/mach-iop32x/iq80321.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Intel IQ80321 evaluation board registers
- */
-
-#ifndef __IQ80321_H
-#define __IQ80321_H
-
-#define IQ80321_UART		0xfe800000	/* UART #1 */
-#define IQ80321_7SEG_1		0xfe840000	/* 7-Segment MSB */
-#define IQ80321_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
-#define IQ80321_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
-#define IQ80321_BATT_STAT	0xfe8f0000	/* Battery Status */
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
deleted file mode 100644
index 2d48bf1398c1..000000000000
--- a/arch/arm/mach-iop32x/irq.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-iop32x/irq.c
- *
- * Generic IOP32X IRQ handling functionality
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "hardware.h"
-
-static u32 iop32x_mask;
-
-static void intctl_write(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
-}
-
-static void intstr_write(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val));
-}
-
-static void
-iop32x_irq_mask(struct irq_data *d)
-{
-	iop32x_mask &= ~(1 << d->irq);
-	intctl_write(iop32x_mask);
-}
-
-static void
-iop32x_irq_unmask(struct irq_data *d)
-{
-	iop32x_mask |= 1 << d->irq;
-	intctl_write(iop32x_mask);
-}
-
-struct irq_chip ext_chip = {
-	.name		= "IOP32x",
-	.irq_ack	= iop32x_irq_mask,
-	.irq_mask	= iop32x_irq_mask,
-	.irq_unmask	= iop32x_irq_unmask,
-};
-
-void __init iop32x_init_irq(void)
-{
-	int i;
-
-	iop_init_cp6_handler();
-
-	intctl_write(0);
-	intstr_write(0);
-	if (machine_is_glantank() ||
-	    machine_is_iq80321() ||
-	    machine_is_iq31244() ||
-	    machine_is_n2100() ||
-	    machine_is_em7210())
-		*IOP3XX_PCIIRSR = 0x0f;
-
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
-		irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-}
diff --git a/arch/arm/mach-iop32x/irqs.h b/arch/arm/mach-iop32x/irqs.h
deleted file mode 100644
index 69858e4e905d..000000000000
--- a/arch/arm/mach-iop32x/irqs.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Author:	Rory Bolt <rorybolt@pacbell.net>
- * Copyright:	(C) 2002 Rory Bolt
- */
-
-#ifndef __IOP32X_IRQS_H
-#define __IOP32X_IRQS_H
-
-/*
- * IOP80321 chipset interrupts
- */
-#define IRQ_IOP32X_DMA0_EOT	0
-#define IRQ_IOP32X_DMA0_EOC	1
-#define IRQ_IOP32X_DMA1_EOT	2
-#define IRQ_IOP32X_DMA1_EOC	3
-#define IRQ_IOP32X_AA_EOT	6
-#define IRQ_IOP32X_AA_EOC	7
-#define IRQ_IOP32X_CORE_PMON	8
-#define IRQ_IOP32X_TIMER0	9
-#define IRQ_IOP32X_TIMER1	10
-#define IRQ_IOP32X_I2C_0	11
-#define IRQ_IOP32X_I2C_1	12
-#define IRQ_IOP32X_MESSAGING	13
-#define IRQ_IOP32X_ATU_BIST	14
-#define IRQ_IOP32X_PERFMON	15
-#define IRQ_IOP32X_CORE_PMU	16
-#define IRQ_IOP32X_BIU_ERR	17
-#define IRQ_IOP32X_ATU_ERR	18
-#define IRQ_IOP32X_MCU_ERR	19
-#define IRQ_IOP32X_DMA0_ERR	20
-#define IRQ_IOP32X_DMA1_ERR	21
-#define IRQ_IOP32X_AA_ERR	23
-#define IRQ_IOP32X_MSG_ERR	24
-#define IRQ_IOP32X_SSP		25
-#define IRQ_IOP32X_XINT0	27
-#define IRQ_IOP32X_XINT1	28
-#define IRQ_IOP32X_XINT2	29
-#define IRQ_IOP32X_XINT3	30
-#define IRQ_IOP32X_HPI		31
-
-#endif
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
deleted file mode 100644
index 78b9a5ee41c9..000000000000
--- a/arch/arm/mach-iop32x/n2100.c
+++ /dev/null
@@ -1,366 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/n2100.c
- *
- * Board support code for the Thecus N2100 platform.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright 2003 (c) MontaVista, Software, Inc.
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/f75375s.h>
-#include <linux/leds-pca9532.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "irqs.h"
-#include "gpio-iop32x.h"
-
-/*
- * N2100 timer tick configuration.
- */
-static void __init n2100_timer_init(void)
-{
-	/* 33.000 MHz crystal.  */
-	iop_init_time(198000000);
-}
-
-
-/*
- * N2100 I/O.
- */
-static struct map_desc n2100_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= N2100_UART,
-		.pfn		= __phys_to_pfn(N2100_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init n2100_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(n2100_io_desc, ARRAY_SIZE(n2100_io_desc));
-}
-
-
-/*
- * N2100 PCI.
- */
-static int n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (PCI_SLOT(dev->devfn) == 1) {
-		/* RTL8110SB #1 */
-		irq = IRQ_IOP32X_XINT0;
-	} else if (PCI_SLOT(dev->devfn) == 2) {
-		/* RTL8110SB #2 */
-		irq = IRQ_IOP32X_XINT3;
-	} else if (PCI_SLOT(dev->devfn) == 3) {
-		/* Sil3512 */
-		irq = IRQ_IOP32X_XINT2;
-	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 1) {
-		/* VT6212 INTA */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 2) {
-		/* VT6212 INTB */
-		irq = IRQ_IOP32X_XINT0;
-	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 3) {
-		/* VT6212 INTC */
-		irq = IRQ_IOP32X_XINT2;
-	} else if (PCI_SLOT(dev->devfn) == 5) {
-		/* Mini-PCI slot */
-		irq = IRQ_IOP32X_XINT3;
-	} else {
-		printk(KERN_ERR "n2100_pci_map_irq() called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci n2100_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= n2100_pci_map_irq,
-};
-
-/*
- * Both r8169 chips on the n2100 exhibit PCI parity problems.  Set
- * the ->broken_parity_status flag for both ports so that the r8169
- * driver knows it should ignore error interrupts.
- */
-static void n2100_fixup_r8169(struct pci_dev *dev)
-{
-	if (dev->bus->number == 0 &&
-	    (dev->devfn == PCI_DEVFN(1, 0) ||
-	     dev->devfn == PCI_DEVFN(2, 0)))
-		dev->broken_parity_status = 1;
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169);
-
-static int __init n2100_pci_init(void)
-{
-	if (machine_is_n2100())
-		pci_common_init(&n2100_pci);
-
-	return 0;
-}
-
-subsys_initcall(n2100_pci_init);
-
-
-/*
- * N2100 machine initialisation.
- */
-static struct physmap_flash_data n2100_flash_data = {
-	.width		= 2,
-};
-
-static struct resource n2100_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf0ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device n2100_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &n2100_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &n2100_flash_resource,
-};
-
-
-static struct plat_serial8250_port n2100_serial_port[] = {
-	{
-		.mapbase	= N2100_UART,
-		.membase	= (char *)N2100_UART,
-		.irq		= 0,
-		.flags		= UPF_SKIP_TEST | UPF_AUTO_IRQ | UPF_SHARE_IRQ,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource n2100_uart_resource = {
-	.start		= N2100_UART,
-	.end		= N2100_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device n2100_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= n2100_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &n2100_uart_resource,
-};
-
-static struct f75375s_platform_data n2100_f75375s = {
-	.pwm		= { 255, 255 },
-	.pwm_enable = { 0, 0 },
-};
-
-static struct pca9532_platform_data n2100_leds = {
-	.leds = {
-	{	.name = "n2100:red:satafail0",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{	.name = "n2100:red:satafail1",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{	.name = "n2100:blue:usb",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{ 	.type = PCA9532_TYPE_NONE },
-
-	{ 	.type = PCA9532_TYPE_NONE },
-	{ 	.type = PCA9532_TYPE_NONE },
-	{ 	.type = PCA9532_TYPE_NONE },
-	{	.name = "n2100:red:usb",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-
-	{	.type = PCA9532_TYPE_NONE }, /* power OFF gpio */
-	{	.type = PCA9532_TYPE_NONE }, /* reset gpio */
-	{	.type = PCA9532_TYPE_NONE },
-	{	.type = PCA9532_TYPE_NONE },
-
-	{	.type = PCA9532_TYPE_NONE },
-	{	.name = "n2100:orange:system",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{	.name = "n2100:red:system",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{	.name = "N2100 beeper"  ,
-		.state =  PCA9532_OFF,
-		.type = PCA9532_TYPE_N2100_BEEP,
-	},
-	},
-	.psc = { 0, 0 },
-	.pwm = { 0, 0 },
-};
-
-static struct i2c_board_info __initdata n2100_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372b", 0x32),
-	},
-	{
-		I2C_BOARD_INFO("f75375", 0x2e),
-		.platform_data = &n2100_f75375s,
-	},
-	{
-		I2C_BOARD_INFO("pca9532", 0x60),
-		.platform_data = &n2100_leds,
-	},
-};
-
-/*
- * Pull PCA9532 GPIO #8 low to power off the machine.
- */
-static void n2100_power_off(void)
-{
-	local_irq_disable();
-
-	/* Start condition, I2C address of PCA9532, write transaction.  */
-	*IOP3XX_IDBR0 = 0xc0;
-	*IOP3XX_ICR0 = 0xe9;
-	mdelay(1);
-
-	/* Write address 0x08.  */
-	*IOP3XX_IDBR0 = 0x08;
-	*IOP3XX_ICR0 = 0xe8;
-	mdelay(1);
-
-	/* Write data 0x01, stop condition.  */
-	*IOP3XX_IDBR0 = 0x01;
-	*IOP3XX_ICR0 = 0xea;
-
-	while (1)
-		;
-}
-
-static void n2100_restart(enum reboot_mode mode, const char *cmd)
-{
-	int ret;
-
-	ret = gpio_direction_output(N2100_HARDWARE_RESET, 0);
-	if (ret) {
-		pr_crit("could not drive reset GPIO low\n");
-		return;
-	}
-	/* Wait for reset to happen */
-	while (1)
-		;
-}
-
-
-static struct timer_list power_button_poll_timer;
-
-static void power_button_poll(struct timer_list *unused)
-{
-	if (gpio_get_value(N2100_POWER_BUTTON) == 0) {
-		ctrl_alt_del();
-		return;
-	}
-
-	power_button_poll_timer.expires = jiffies + (HZ / 10);
-	add_timer(&power_button_poll_timer);
-}
-
-static int __init n2100_request_gpios(void)
-{
-	int ret;
-
-	if (!machine_is_n2100())
-		return 0;
-
-	ret = gpio_request(N2100_HARDWARE_RESET, "reset");
-	if (ret)
-		pr_err("could not request reset GPIO\n");
-
-	ret = gpio_request(N2100_POWER_BUTTON, "power");
-	if (ret)
-		pr_err("could not request power GPIO\n");
-	else {
-		ret = gpio_direction_input(N2100_POWER_BUTTON);
-		if (ret)
-			pr_err("could not set power GPIO as input\n");
-	}
-	/* Set up power button poll timer */
-	timer_setup(&power_button_poll_timer, power_button_poll, 0);
-	power_button_poll_timer.expires = jiffies + (HZ / 10);
-	add_timer(&power_button_poll_timer);
-	return 0;
-}
-device_initcall(n2100_request_gpios);
-
-static void __init n2100_init_machine(void)
-{
-	register_iop32x_gpio();
-	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&n2100_flash_device);
-	platform_device_register(&n2100_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	i2c_register_board_info(0, n2100_i2c_devices,
-		ARRAY_SIZE(n2100_i2c_devices));
-
-	pm_power_off = n2100_power_off;
-}
-
-MACHINE_START(N2100, "Thecus N2100")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.map_io		= n2100_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= n2100_timer_init,
-	.init_machine	= n2100_init_machine,
-	.restart	= n2100_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/n2100.h b/arch/arm/mach-iop32x/n2100.h
deleted file mode 100644
index 0b97b940d3e7..000000000000
--- a/arch/arm/mach-iop32x/n2100.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Thecus N2100 board registers
- */
-
-#ifndef __N2100_H
-#define __N2100_H
-
-#define N2100_UART		0xfe800000	/* UART */
-
-#define N2100_COPY_BUTTON	IOP3XX_GPIO_LINE(0)
-#define N2100_PCA9532_RESET	IOP3XX_GPIO_LINE(2)
-#define N2100_RESET_BUTTON	IOP3XX_GPIO_LINE(3)
-#define N2100_HARDWARE_RESET	IOP3XX_GPIO_LINE(4)
-#define N2100_POWER_BUTTON	IOP3XX_GPIO_LINE(5)
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/pci.c b/arch/arm/mach-iop32x/pci.c
deleted file mode 100644
index ab0010dc3145..000000000000
--- a/arch/arm/mach-iop32x/pci.c
+++ /dev/null
@@ -1,401 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/plat-iop/pci.c
- *
- * PCI support for the Intel IOP32X and IOP33X processors
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/signal.h>
-#include <asm/mach/pci.h>
-#include "hardware.h"
-#include "iop3xx.h"
-
-// #define DEBUG
-
-#ifdef DEBUG
-#define  DBG(x...) printk(x)
-#else
-#define  DBG(x...) do { } while (0)
-#endif
-
-/*
- * This routine builds either a type0 or type1 configuration command.  If the
- * bus is on the 803xx then a type0 made, else a type1 is created.
- */
-static u32 iop3xx_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
-	struct pci_sys_data *sys = bus->sysdata;
-	u32 addr;
-
-	if (sys->busnr == bus->number)
-		addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
-	else
-		addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
-	addr |=	PCI_FUNC(devfn) << 8 | (where & ~3);
-
-	return addr;
-}
-
-/*
- * This routine checks the status of the last configuration cycle.  If an error
- * was detected it returns a 1, else it returns a 0.  The errors being checked
- * are parity, master abort, target abort (master and target).  These types of
- * errors occur during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop3xx_pci_status(void)
-{
-	unsigned int status;
-	int ret = 0;
-
-	/*
-	 * Check the status registers.
-	 */
-	status = *IOP3XX_ATUSR;
-	if (status & 0xf900) {
-		DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
-		*IOP3XX_ATUSR = status & 0xf900;
-		ret = 1;
-	}
-
-	status = *IOP3XX_ATUISR;
-	if (status & 0x679f) {
-		DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
-		*IOP3XX_ATUISR = status & 0x679f;
-		ret = 1;
-	}
-
-	return ret;
-}
-
-/*
- * Simply write the address register and read the configuration
- * data.  Note that the 4 nops ensure that we are able to handle
- * a delayed abort (in theory.)
- */
-static u32 iop3xx_read(unsigned long addr)
-{
-	u32 val;
-
-	__asm__ __volatile__(
-		"str	%1, [%2]\n\t"
-		"ldr	%0, [%3]\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		: "=r" (val)
-		: "r" (addr), "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
-
-	return val;
-}
-
-/*
- * The read routines must check the error status of the last configuration
- * cycle.  If there was an error, the routine returns all hex f's.
- */
-static int
-iop3xx_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
-	u32 val = iop3xx_read(addr) >> ((where & 3) * 8);
-
-	if (iop3xx_pci_status())
-		val = 0xffffffff;
-
-	*value = val;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop3xx_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 value)
-{
-	unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
-	u32 val;
-
-	if (size != 4) {
-		val = iop3xx_read(addr);
-		if (iop3xx_pci_status())
-			return PCIBIOS_SUCCESSFUL;
-
-		where = (where & 3) * 8;
-
-		if (size == 1)
-			val &= ~(0xff << where);
-		else
-			val &= ~(0xffff << where);
-
-		*IOP3XX_OCCDR = val | value << where;
-	} else {
-		asm volatile(
-			"str	%1, [%2]\n\t"
-			"str	%0, [%3]\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			:
-			: "r" (value), "r" (addr),
-			  "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops iop3xx_ops = {
-	.read	= iop3xx_read_config,
-	.write	= iop3xx_write_config,
-};
-
-/*
- * When a PCI device does not exist during config cycles, the 80200 gets a
- * bus error instead of returning 0xffffffff. This handler simply returns.
- */
-static int
-iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
-		addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if (nr != 0)
-		return 0;
-
-	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-	res->start = IOP3XX_PCI_LOWER_MEM_PA;
-	res->end   = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
-	res->name  = "IOP3XX PCI Memory Space";
-	res->flags = IORESOURCE_MEM;
-	request_resource(&iomem_resource, res);
-
-	/*
-	 * Use whatever translation is already setup.
-	 */
-	sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0;
-
-	pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
-
-	pci_ioremap_io(0, IOP3XX_PCI_LOWER_IO_PA);
-
-	return 1;
-}
-
-void __init iop3xx_atu_setup(void)
-{
-	/* BAR 0 ( Disabled ) */
-	*IOP3XX_IAUBAR0 = 0x0;
-	*IOP3XX_IABAR0  = 0x0;
-	*IOP3XX_IATVR0  = 0x0;
-	*IOP3XX_IALR0   = 0x0;
-
-	/* BAR 1 ( Disabled ) */
-	*IOP3XX_IAUBAR1 = 0x0;
-	*IOP3XX_IABAR1  = 0x0;
-	*IOP3XX_IALR1   = 0x0;
-
-	/* BAR 2 (1:1 mapping with Physical RAM) */
-	/* Set limit and enable */
-	*IOP3XX_IALR2 = ~((u32)IOP3XX_MAX_RAM_SIZE - 1) & ~0x1;
-	*IOP3XX_IAUBAR2 = 0x0;
-
-	/* Align the inbound bar with the base of memory */
-	*IOP3XX_IABAR2 = PHYS_OFFSET |
-			       PCI_BASE_ADDRESS_MEM_TYPE_64 |
-			       PCI_BASE_ADDRESS_MEM_PREFETCH;
-
-	*IOP3XX_IATVR2 = PHYS_OFFSET;
-
-	/* Outbound window 0 */
-	*IOP3XX_OMWTVR0 = IOP3XX_PCI_LOWER_MEM_BA;
-	*IOP3XX_OUMWTVR0 = 0;
-
-	/* Outbound window 1 */
-	*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA +
-			  IOP3XX_PCI_MEM_WINDOW_SIZE / 2;
-	*IOP3XX_OUMWTVR1 = 0;
-
-	/* BAR 3 ( Disabled ) */
-	*IOP3XX_IAUBAR3 = 0x0;
-	*IOP3XX_IABAR3  = 0x0;
-	*IOP3XX_IATVR3  = 0x0;
-	*IOP3XX_IALR3   = 0x0;
-
-	/* Setup the I/O Bar
-	 */
-	*IOP3XX_OIOWTVR = IOP3XX_PCI_LOWER_IO_BA;
-
-	/* Enable inbound and outbound cycles
-	 */
-	*IOP3XX_ATUCMD |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
-			       PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-	*IOP3XX_ATUCR |= IOP3XX_ATUCR_OUT_EN;
-}
-
-void __init iop3xx_atu_disable(void)
-{
-	*IOP3XX_ATUCMD = 0;
-	*IOP3XX_ATUCR = 0;
-
-	/* wait for cycles to quiesce */
-	while (*IOP3XX_PCSR & (IOP3XX_PCSR_OUT_Q_BUSY |
-				     IOP3XX_PCSR_IN_Q_BUSY))
-		cpu_relax();
-
-	/* BAR 0 ( Disabled ) */
-	*IOP3XX_IAUBAR0 = 0x0;
-	*IOP3XX_IABAR0  = 0x0;
-	*IOP3XX_IATVR0  = 0x0;
-	*IOP3XX_IALR0   = 0x0;
-
-	/* BAR 1 ( Disabled ) */
-	*IOP3XX_IAUBAR1 = 0x0;
-	*IOP3XX_IABAR1  = 0x0;
-	*IOP3XX_IALR1   = 0x0;
-
-	/* BAR 2 ( Disabled ) */
-	*IOP3XX_IAUBAR2 = 0x0;
-	*IOP3XX_IABAR2  = 0x0;
-	*IOP3XX_IATVR2  = 0x0;
-	*IOP3XX_IALR2   = 0x0;
-
-	/* BAR 3 ( Disabled ) */
-	*IOP3XX_IAUBAR3 = 0x0;
-	*IOP3XX_IABAR3  = 0x0;
-	*IOP3XX_IATVR3  = 0x0;
-	*IOP3XX_IALR3   = 0x0;
-
-	/* Clear the outbound windows */
-	*IOP3XX_OIOWTVR  = 0;
-
-	/* Outbound window 0 */
-	*IOP3XX_OMWTVR0 = 0;
-	*IOP3XX_OUMWTVR0 = 0;
-
-	/* Outbound window 1 */
-	*IOP3XX_OMWTVR1 = 0;
-	*IOP3XX_OUMWTVR1 = 0;
-}
-
-/* Flag to determine whether the ATU is initialized and the PCI bus scanned */
-int init_atu;
-
-int iop3xx_get_init_atu(void) {
-	/* check if default has been overridden */
-	if (init_atu != IOP3XX_INIT_ATU_DEFAULT)
-		return init_atu;
-	else
-		return IOP3XX_INIT_ATU_DISABLE;
-}
-
-static void __init iop3xx_atu_debug(void)
-{
-	DBG("PCI: Intel IOP3xx PCI init.\n");
-	DBG("PCI: Outbound memory window 0: PCI 0x%08x%08x\n",
-		*IOP3XX_OUMWTVR0, *IOP3XX_OMWTVR0);
-	DBG("PCI: Outbound memory window 1: PCI 0x%08x%08x\n",
-		*IOP3XX_OUMWTVR1, *IOP3XX_OMWTVR1);
-	DBG("PCI: Outbound IO window: PCI 0x%08x\n",
-		*IOP3XX_OIOWTVR);
-
-	DBG("PCI: Inbound memory window 0: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
-		*IOP3XX_IAUBAR0, *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0);
-	DBG("PCI: Inbound memory window 1: PCI 0x%08x%08x 0x%08x\n",
-		*IOP3XX_IAUBAR1, *IOP3XX_IABAR1, *IOP3XX_IALR1);
-	DBG("PCI: Inbound memory window 2: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
-		*IOP3XX_IAUBAR2, *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2);
-	DBG("PCI: Inbound memory window 3: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
-		*IOP3XX_IAUBAR3, *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3);
-
-	DBG("PCI: Expansion ROM window: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
-		0, *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR);
-
-	DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD);
-	DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR);
-
-	hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, 0, "imprecise external abort");
-}
-
-/* for platforms that might be host-bus-adapters */
-void __init iop3xx_pci_preinit_cond(void)
-{
-	if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) {
-		iop3xx_atu_disable();
-		iop3xx_atu_setup();
-		iop3xx_atu_debug();
-	}
-}
-
-void __init iop3xx_pci_preinit(void)
-{
-	pcibios_min_mem = 0;
-
-	iop3xx_atu_disable();
-	iop3xx_atu_setup();
-	iop3xx_atu_debug();
-}
-
-/* allow init_atu to be user overridden */
-static int __init iop3xx_init_atu_setup(char *str)
-{
-	init_atu = IOP3XX_INIT_ATU_DEFAULT;
-	if (str) {
-		while (*str != '\0') {
-			switch (*str) {
-			case 'y':
-			case 'Y':
-				init_atu = IOP3XX_INIT_ATU_ENABLE;
-				break;
-			case 'n':
-			case 'N':
-				init_atu = IOP3XX_INIT_ATU_DISABLE;
-				break;
-			case ',':
-			case '=':
-				break;
-			default:
-				printk(KERN_DEBUG "\"%s\" malformed at "
-					    "character: \'%c\'",
-					    __func__,
-					    *str);
-				*(str + 1) = '\0';
-			}
-			str++;
-		}
-	}
-
-	return 1;
-}
-
-__setup("iop3xx_init_atu", iop3xx_init_atu_setup);
-
diff --git a/arch/arm/mach-iop32x/pmu.c b/arch/arm/mach-iop32x/pmu.c
deleted file mode 100644
index bdbc7a3cb8a3..000000000000
--- a/arch/arm/mach-iop32x/pmu.c
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * PMU IRQ registration for the iop3xx xscale PMU families.
- * Copyright (C) 2010 Will Deacon, ARM Ltd.
- */
-
-#include <linux/platform_device.h>
-#include "irqs.h"
-
-static struct resource pmu_resource = {
-	.start	= IRQ_IOP32X_CORE_PMU,
-	.end	= IRQ_IOP32X_CORE_PMU,
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name		= "xscale-pmu",
-	.id		= -1,
-	.resource	= &pmu_resource,
-	.num_resources	= 1,
-};
-
-static int __init iop3xx_pmu_init(void)
-{
-	platform_device_register(&pmu_device);
-	return 0;
-}
-
-arch_initcall(iop3xx_pmu_init);
diff --git a/arch/arm/mach-iop32x/restart.c b/arch/arm/mach-iop32x/restart.c
deleted file mode 100644
index 3dfa54d3a7a8..000000000000
--- a/arch/arm/mach-iop32x/restart.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * restart.c
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- */
-#include <asm/system_misc.h>
-#include "hardware.h"
-#include "iop3xx.h"
-
-void iop3xx_restart(enum reboot_mode mode, const char *cmd)
-{
-	*IOP3XX_PCSR = 0x30;
-
-	/* Jump into ROM at address 0 */
-	soft_restart(0);
-}
diff --git a/arch/arm/mach-iop32x/setup.c b/arch/arm/mach-iop32x/setup.c
deleted file mode 100644
index a0a81c28a632..000000000000
--- a/arch/arm/mach-iop32x/setup.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/plat-iop/setup.c
- *
- * Author: Nicolas Pitre <nico@fluxnic.net>
- * Copyright (C) 2001 MontaVista Software, Inc.
- * Copyright (C) 2004 Intel Corporation.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <asm/mach/map.h>
-#include "iop3xx.h"
-
-/*
- * Standard IO mapping for all IOP3xx based systems.  Note that
- * the IOP3xx OCCDR must be mapped uncached and unbuffered.
- */
-static struct map_desc iop3xx_std_desc[] __initdata = {
-	{	/* mem mapped registers */
-		.virtual	= IOP3XX_PERIPHERAL_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE),
-		.length		= IOP3XX_PERIPHERAL_SIZE,
-		.type		= MT_UNCACHED,
-	},
-};
-
-void __init iop3xx_map_io(void)
-{
-	iotable_init(iop3xx_std_desc, ARRAY_SIZE(iop3xx_std_desc));
-}
diff --git a/arch/arm/mach-iop32x/time.c b/arch/arm/mach-iop32x/time.c
deleted file mode 100644
index ae533b66fefd..000000000000
--- a/arch/arm/mach-iop32x/time.c
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/plat-iop/time.c
- *
- * Timer code for IOP32x and IOP33x based systems
- *
- * Author: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright 2002-2003 MontaVista Software Inc.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-#include <linux/io.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/export.h>
-#include <linux/sched_clock.h>
-#include <asm/irq.h>
-#include <linux/uaccess.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "irqs.h"
-
-/*
- * Minimum clocksource/clockevent timer range in seconds
- */
-#define IOP_MIN_RANGE 4
-
-/*
- * IOP clocksource (free-running timer 1).
- */
-static u64 notrace iop_clocksource_read(struct clocksource *unused)
-{
-	return 0xffffffffu - read_tcr1();
-}
-
-static struct clocksource iop_clocksource = {
-	.name 		= "iop_timer1",
-	.rating		= 300,
-	.read		= iop_clocksource_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
- * IOP sched_clock() implementation via its clocksource.
- */
-static u64 notrace iop_read_sched_clock(void)
-{
-	return 0xffffffffu - read_tcr1();
-}
-
-/*
- * IOP clockevents (interrupting timer 0).
- */
-static int iop_set_next_event(unsigned long delta,
-			      struct clock_event_device *unused)
-{
-	u32 tmr = IOP_TMR_PRIVILEGED | IOP_TMR_RATIO_1_1;
-
-	BUG_ON(delta == 0);
-	write_tmr0(tmr & ~(IOP_TMR_EN | IOP_TMR_RELOAD));
-	write_tcr0(delta);
-	write_tmr0((tmr & ~IOP_TMR_RELOAD) | IOP_TMR_EN);
-
-	return 0;
-}
-
-static unsigned long ticks_per_jiffy;
-
-static int iop_set_periodic(struct clock_event_device *evt)
-{
-	u32 tmr = read_tmr0();
-
-	write_tmr0(tmr & ~IOP_TMR_EN);
-	write_tcr0(ticks_per_jiffy - 1);
-	write_trr0(ticks_per_jiffy - 1);
-	tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
-
-	write_tmr0(tmr);
-	return 0;
-}
-
-static int iop_set_oneshot(struct clock_event_device *evt)
-{
-	u32 tmr = read_tmr0();
-
-	/* ->set_next_event sets period and enables timer */
-	tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN);
-	write_tmr0(tmr);
-	return 0;
-}
-
-static int iop_shutdown(struct clock_event_device *evt)
-{
-	u32 tmr = read_tmr0();
-
-	tmr &= ~IOP_TMR_EN;
-	write_tmr0(tmr);
-	return 0;
-}
-
-static int iop_resume(struct clock_event_device *evt)
-{
-	u32 tmr = read_tmr0();
-
-	tmr |= IOP_TMR_EN;
-	write_tmr0(tmr);
-	return 0;
-}
-
-static struct clock_event_device iop_clockevent = {
-	.name			= "iop_timer0",
-	.features		= CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_ONESHOT,
-	.rating			= 300,
-	.set_next_event		= iop_set_next_event,
-	.set_state_shutdown	= iop_shutdown,
-	.set_state_periodic	= iop_set_periodic,
-	.tick_resume		= iop_resume,
-	.set_state_oneshot	= iop_set_oneshot,
-};
-
-static irqreturn_t
-iop_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	write_tisr(1);
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static unsigned long iop_tick_rate;
-unsigned long get_iop_tick_rate(void)
-{
-	return iop_tick_rate;
-}
-EXPORT_SYMBOL(get_iop_tick_rate);
-
-void __init iop_init_time(unsigned long tick_rate)
-{
-	u32 timer_ctl;
-	int irq = IRQ_IOP32X_TIMER0;
-
-	sched_clock_register(iop_read_sched_clock, 32, tick_rate);
-
-	ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
-	iop_tick_rate = tick_rate;
-
-	timer_ctl = IOP_TMR_EN | IOP_TMR_PRIVILEGED |
-			IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1;
-
-	/*
-	 * Set up interrupting clockevent timer 0.
-	 */
-	write_tmr0(timer_ctl & ~IOP_TMR_EN);
-	write_tisr(1);
-	if (request_irq(irq, iop_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
-			"IOP Timer Tick", &iop_clockevent))
-		pr_err("Failed to request irq() %d (IOP Timer Tick)\n", irq);
-	iop_clockevent.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&iop_clockevent, tick_rate,
-					0xf, 0xfffffffe);
-
-	/*
-	 * Set up free-running clocksource timer 1.
-	 */
-	write_trr1(0xffffffff);
-	write_tcr1(0xffffffff);
-	write_tmr1(timer_ctl);
-	clocksource_register_hz(&iop_clocksource, tick_rate);
-}
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 165c184801e1..cb46802f5ce5 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -1,240 +1,19 @@
 # SPDX-License-Identifier: GPL-2.0-only
-if ARCH_IXP4XX
-
-menu "Intel IXP4xx Implementation Options"
-
-comment "IXP4xx Platforms"
-
-config MACH_IXP4XX_OF
-	bool
-	prompt "Devce Tree IXP4xx boards"
-	default y
+menuconfig ARCH_IXP4XX
+	bool "IXP4xx-based platforms"
+	depends on ARCH_MULTI_V5
+	depends on CPU_BIG_ENDIAN
 	select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
+	select CPU_XSCALE
+	select GPIO_IXP4XX
+	select GPIOLIB
+	select FORCE_PCI
 	select I2C
 	select I2C_IOP3XX
-	select PCI
+	select IXP4XX_IRQ
+	select IXP4XX_TIMER
+	select USB_EHCI_BIG_ENDIAN_DESC
+	select USB_EHCI_BIG_ENDIAN_MMIO
 	select USE_OF
 	help
-	  Say 'Y' here to support Device Tree-based IXP4xx platforms.
-
-config MACH_NSLU2
-	bool
-	prompt "Linksys NSLU2"
-	select FORCE_PCI
-	help
-	  Say 'Y' here if you want your kernel to support Linksys's
-	  NSLU2 NAS device. For more information on this platform,
-	  see http://www.nslu2-linux.org
-
-config MACH_AVILA
-	bool "Avila"
-	select FORCE_PCI
-	help
-	  Say 'Y' here if you want your kernel to support the Gateworks
-	  Avila Network Platform. For more information on this platform,
-	  see <file:Documentation/arm/ixp4xx.rst>.
-
-config MACH_LOFT
-    bool "Loft"
-    depends on MACH_AVILA
-    help
-	  Say 'Y' here if you want your kernel to support the Giant
-	  Shoulder Inc Loft board (a minor variation on the standard
-	  Gateworks Avila Network Platform).
-
-config ARCH_ADI_COYOTE
-	bool "Coyote"
-	select FORCE_PCI
-	help
-	  Say 'Y' here if you want your kernel to support the ADI 
-	  Engineering Coyote Gateway Reference Platform. For more
-	  information on this platform, see <file:Documentation/arm/ixp4xx.rst>.
-
-config MACH_GATEWAY7001
-	bool "Gateway 7001"
-	select FORCE_PCI
-	help
-	  Say 'Y' here if you want your kernel to support Gateway's
-	  7001 Access Point. For more information on this platform,
-	  see http://openwrt.org
-
-config MACH_WG302V2
-	bool "Netgear WG302 v2 / WAG302 v2"
-	select FORCE_PCI
-	help
-	  Say 'Y' here if you want your kernel to support Netgear's
-	  WG302 v2 or WAG302 v2 Access Points. For more information
-	  on this platform, see http://openwrt.org
-
-config ARCH_IXDP425
-	bool "IXDP425"
-	help
-	  Say 'Y' here if you want your kernel to support Intel's 
-	  IXDP425 Development Platform (Also known as Richfield).  
-	  For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>.
-
-config MACH_IXDPG425
-	bool "IXDPG425"
-	help
-	  Say 'Y' here if you want your kernel to support Intel's
-	  IXDPG425 Development Platform (Also known as Montajade).
-	  For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>.
-
-config MACH_IXDP465
-	bool "IXDP465"
-	help
-	  Say 'Y' here if you want your kernel to support Intel's
-	  IXDP465 Development Platform (Also known as BMP).
-	  For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>.
-
-config MACH_GORAMO_MLR
-	bool "GORAMO Multi Link Router"
-	help
-	  Say 'Y' here if you want your kernel to support GORAMO
-	  MultiLink router.
-
-config MACH_KIXRP435
-	bool "KIXRP435"
-	help
-	  Say 'Y' here if you want your kernel to support Intel's
-	  KIXRP435 Reference Platform.
-	  For more information on this platform, see <file:Documentation/arm/ixp4xx.rst>.
-
-#
-# IXCDP1100 is the exact same HW as IXDP425, but with a different machine 
-# number from the bootloader due to marketing monkeys, so we just enable it 
-# by default if IXDP425 is enabled.
-#
-config ARCH_IXCDP1100
-	bool 
-	depends on ARCH_IXDP425
-	default y
-
-config ARCH_PRPMC1100
-	bool "PrPMC1100"
-	help
-	  Say 'Y' here if you want your kernel to support the Motorola
-	  PrPCM1100 Processor Mezanine Module. For more information on
-	  this platform, see <file:Documentation/arm/ixp4xx.rst>.
-
-config MACH_NAS100D
-	bool
-	prompt "NAS100D"
-	select FORCE_PCI
-	help
-	  Say 'Y' here if you want your kernel to support Iomega's
-	  NAS 100d device. For more information on this platform,
-	  see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
-
-config MACH_DSMG600
-	bool
-	prompt "D-Link DSM-G600 RevA"
-	select FORCE_PCI
-	help
-	  Say 'Y' here if you want your kernel to support D-Link's
-	  DSM-G600 RevA device. For more information on this platform,
-	  see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
-
-config	ARCH_IXDP4XX
-	bool
-	depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
-	default y
-
-config MACH_FSG
-	bool
-	prompt "Freecom FSG-3"
-	select FORCE_PCI
-	help
-	  Say 'Y' here if you want your kernel to support Freecom's
-	  FSG-3 device. For more information on this platform,
-	  see http://www.nslu2-linux.org/wiki/FSG3/HomePage
-
-config MACH_ARCOM_VULCAN
-	bool
-	prompt "Arcom/Eurotech Vulcan"
-	select FORCE_PCI
-	help
-	  Say 'Y' here if you want your kernel to support Arcom's
-	  Vulcan board.
-
-#
-# Certain registers and IRQs are only enabled if supporting IXP465 CPUs
-#
-config CPU_IXP46X
-	bool
-	depends on MACH_IXDP465
-	default y
-
-config CPU_IXP43X
-	bool
-	depends on MACH_KIXRP435
-	default y
-
-config MACH_GTWX5715
-	bool "Gemtek WX5715 (Linksys WRV54G)"
-	depends on ARCH_IXP4XX
-	select FORCE_PCI
-	help
-		This board is currently inside the Linksys WRV54G Gateways.
-
-		IXP425 - 266mhz
-		32mb SDRAM
-		8mb Flash
-		miniPCI slot 0 does not have a card connector soldered to the board
-		miniPCI slot 1 has an ISL3880 802.11g card (Prism54)
-		npe0 is connected to a Kendin KS8995M Switch (4 ports)
-		npe1 is the "wan" port
-		"Console" UART is available on J11 as console
-		"High Speed" UART is n/c (as far as I can tell)
-		20 Pin ARM/Xscale JTAG interface on J2
-
-config MACH_DEVIXP
-	bool "Omicron DEVIXP"
-	help
-	  Say 'Y' here if you want your kernel to support the DEVIXP
-	  board from OMICRON electronics GmbH.
-
-config MACH_MICCPT
-	bool "Omicron MICCPT"
-	select FORCE_PCI
-	help
-	  Say 'Y' here if you want your kernel to support the MICCPT
-	  board from OMICRON electronics GmbH.
-
-config MACH_MIC256
-	bool "Omicron MIC256"
-	help
-	  Say 'Y' here if you want your kernel to support the MIC256
-	  board from OMICRON electronics GmbH.
-
-comment "IXP4xx Options"
-
-config IXP4XX_INDIRECT_PCI
-	bool "Use indirect PCI memory access"
-	depends on PCI
-	help
-          IXP4xx provides two methods of accessing PCI memory space:
-
-          1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
-             To access PCI via this space, we simply ioremap() the BAR
-             into the kernel and we can use the standard read[bwl]/write[bwl]
-             macros. This is the preferred method due to speed but it
-             limits the system to just 64MB of PCI memory. This can be
-             problematic if using video cards and other memory-heavy devices.
-
-	  2) If > 64MB of memory space is required, the IXP4xx can be
-	     configured to use indirect registers to access the whole PCI
-	     memory space. This currently allows for up to 1 GB (0x10000000
-	     to 0x4FFFFFFF) of memory on the bus. The disadvantage of this
-	     is that every PCI access requires three local register accesses
-	     plus a spinlock, but in some cases the performance hit is
-	     acceptable. In addition, you cannot mmap() PCI devices in this
-	     case due to the indirect nature of the PCI window.
-
-	  By default, the direct method is used. Choose this option if you
-	  need to use the indirect method instead. If you don't know
-	  what you need, leave this option unselected.
-
-endmenu
-
-endif
+	  Support for Intel's IXP4XX (XScale) family of processors.
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 1fa4e6605782..3d1c9d854c7f 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -1,45 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-obj-pci-y	:=
-obj-pci-n	:=
-
-# Device tree platform
-obj-pci-$(CONFIG_MACH_IXP4XX_OF)	+= ixp4xx-of.o
-
-obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
-obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
-obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
-obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
-obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
-obj-pci-$(CONFIG_MACH_MICCPT)		+= miccpt-pci.o
-obj-pci-$(CONFIG_MACH_NSLU2)		+= nslu2-pci.o
-obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
-obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
-obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
-obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
-obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
-obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
-
-obj-y	+= common.o
-
-obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-setup.o
-obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
-obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
-obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
-obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
-obj-$(CONFIG_MACH_DEVIXP)	+= omixp-setup.o
-obj-$(CONFIG_MACH_MICCPT)	+= omixp-setup.o
-obj-$(CONFIG_MACH_MIC256)	+= omixp-setup.o
-obj-$(CONFIG_MACH_NSLU2)	+= nslu2-setup.o
-obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o
-obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
-obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
-obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
-obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
-obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
-obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
-
-obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+obj-y	+= ixp4xx-of.o
diff --git a/arch/arm/mach-ixp4xx/Makefile.boot b/arch/arm/mach-ixp4xx/Makefile.boot
deleted file mode 100644
index 9b015bd1ef27..000000000000
--- a/arch/arm/mach-ixp4xx/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
deleted file mode 100644
index 2e5996a96dd3..000000000000
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ /dev/null
@@ -1,79 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/avila-pci.c
- *
- * Gateworks Avila board-level PCI initialization
- *
- * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
- *
- * Based on ixdp-pci.c
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <asm/mach/pci.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include "irqs.h"
-
-#define AVILA_MAX_DEV	4
-#define LOFT_MAX_DEV	6
-#define IRQ_LINES	4
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA		11
-#define INTB		10
-#define INTC		9
-#define INTD		8
-
-void __init avila_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init avila_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[IRQ_LINES] = {
-		IXP4XX_GPIO_IRQ(INTA),
-		IXP4XX_GPIO_IRQ(INTB),
-		IXP4XX_GPIO_IRQ(INTC),
-		IXP4XX_GPIO_IRQ(INTD)
-	};
-
-	if (slot >= 1 &&
-	    slot <= (machine_is_loft() ? LOFT_MAX_DEV : AVILA_MAX_DEV) &&
-	    pin >= 1 && pin <= IRQ_LINES)
-		return pci_irq_table[(slot + pin - 2) % 4];
-
-	return -1;
-}
-
-struct hw_pci avila_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit	= avila_pci_preinit,
-	.setup		= ixp4xx_setup,
-	.map_irq	= avila_map_irq,
-};
-
-int __init avila_pci_init(void)
-{
-	if (machine_is_avila() || machine_is_loft())
-		pci_common_init(&avila_pci);
-	return 0;
-}
-
-subsys_initcall(avila_pci_init);
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
deleted file mode 100644
index 1981b33109cb..000000000000
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ /dev/null
@@ -1,209 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/avila-setup.c
- *
- * Gateworks Avila board-setup
- *
- * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
- *
- * Based on ixdp-setup.c
- * Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <linux/gpio/machine.h>
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-#define AVILA_SDA_PIN	7
-#define AVILA_SCL_PIN	6
-
-static struct flash_platform_data avila_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource avila_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device avila_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &avila_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &avila_flash_resource,
-};
-
-static struct gpiod_lookup_table avila_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio.0",
-	.table		= {
-		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SDA_PIN,
-				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SCL_PIN,
-				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct platform_device avila_i2c_gpio = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev	 = {
-		.platform_data	= NULL,
-	},
-};
-
-static struct resource avila_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM
-	}
-};
-
-static struct plat_serial8250_port avila_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device avila_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= avila_uart_data,
-	.num_resources		= 2,
-	.resource		= avila_uart_resources
-};
-
-static struct resource avila_pata_resources[] = {
-	{
-		.flags	= IORESOURCE_MEM
-	},
-	{
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "intrq",
-		.start	= IRQ_IXP4XX_GPIO12,
-		.end	= IRQ_IXP4XX_GPIO12,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct ixp4xx_pata_data avila_pata_data = {
-	.cs0_bits	= 0xbfff0043,
-	.cs1_bits	= 0xbfff0043,
-};
-
-static struct platform_device avila_pata = {
-	.name			= "pata_ixp4xx_cf",
-	.id			= 0,
-	.dev.platform_data      = &avila_pata_data,
-	.num_resources		= ARRAY_SIZE(avila_pata_resources),
-	.resource		= avila_pata_resources,
-};
-
-static struct platform_device *avila_devices[] __initdata = {
-	&avila_i2c_gpio,
-	&avila_flash,
-	&avila_uart
-};
-
-static void __init avila_init(void)
-{
-	ixp4xx_sys_init();
-
-	avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	avila_flash_resource.end =
-		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-	gpiod_add_lookup_table(&avila_i2c_gpiod_table);
-
-	platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
-
-	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
-	avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-
-	avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-	avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
-
-	avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
-	avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-
-	platform_device_register(&avila_pata);
-
-}
-
-MACHINE_START(AVILA, "Gateworks Avila Network Platform")
-	/* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= avila_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-
- /*
-  * Loft is functionally equivalent to Avila except that it has a
-  * different number for the maximum PCI devices.  The MACHINE
-  * structure below is identical to Avila except for the comment.
-  */
-#ifdef CONFIG_MACH_LOFT
-MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
-	/* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= avila_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
deleted file mode 100644
index 893c19c254e3..000000000000
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ /dev/null
@@ -1,451 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/common-pci.c 
- *
- * IXP4XX PCI routines for all platforms
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 Greg Ungerer <gerg@snapgear.com>
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/dma-mapping.h>
-
-#include <asm/cputype.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-#include <asm/mach/pci.h>
-#include <mach/hardware.h>
-
-
-/*
- * IXP4xx PCI read function is dependent on whether we are 
- * running A0 or B0 (AppleGate) silicon.
- */
-int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
-
-/*
- * Base address for PCI register region
- */
-unsigned long ixp4xx_pci_reg_base = 0;
-
-/*
- * PCI cfg an I/O routines are done by programming a 
- * command/byte enable register, and then read/writing
- * the data from a data register. We need to ensure
- * these transactions are atomic or we will end up
- * with corrupt data on the bus or in a driver.
- */
-static DEFINE_RAW_SPINLOCK(ixp4xx_pci_lock);
-
-/*
- * Read from PCI config space
- */
-static void crp_read(u32 ad_cbe, u32 *data)
-{
-	unsigned long flags;
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-	*PCI_CRP_AD_CBE = ad_cbe;
-	*data = *PCI_CRP_RDATA;
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-}
-
-/*
- * Write to PCI config space
- */
-static void crp_write(u32 ad_cbe, u32 data)
-{ 
-	unsigned long flags;
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-	*PCI_CRP_AD_CBE = CRP_AD_CBE_WRITE | ad_cbe;
-	*PCI_CRP_WDATA = data;
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-}
-
-static inline int check_master_abort(void)
-{
-	/* check Master Abort bit after access */
-	unsigned long isr = *PCI_ISR;
-
-	if (isr & PCI_ISR_PFE) {
-		/* make sure the Master Abort bit is reset */    
-		*PCI_ISR = PCI_ISR_PFE;
-		pr_debug("%s failed\n", __func__);
-		return 1;
-	}
-
-	return 0;
-}
-
-int ixp4xx_pci_read_errata(u32 addr, u32 cmd, u32* data)
-{
-	unsigned long flags;
-	int retval = 0;
-	int i;
-
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
-	*PCI_NP_AD = addr;
-
-	/* 
-	 * PCI workaround  - only works if NP PCI space reads have 
-	 * no side effects!!! Read 8 times. last one will be good.
-	 */
-	for (i = 0; i < 8; i++) {
-		*PCI_NP_CBE = cmd;
-		*data = *PCI_NP_RDATA;
-		*data = *PCI_NP_RDATA;
-	}
-
-	if(check_master_abort())
-		retval = 1;
-
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-	return retval;
-}
-
-int ixp4xx_pci_read_no_errata(u32 addr, u32 cmd, u32* data)
-{
-	unsigned long flags;
-	int retval = 0;
-
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
-	*PCI_NP_AD = addr;
-
-	/* set up and execute the read */    
-	*PCI_NP_CBE = cmd;
-
-	/* the result of the read is now in NP_RDATA */
-	*data = *PCI_NP_RDATA; 
-
-	if(check_master_abort())
-		retval = 1;
-
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-	return retval;
-}
-
-int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data)
-{    
-	unsigned long flags;
-	int retval = 0;
-
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
-	*PCI_NP_AD = addr;
-
-	/* set up the write */
-	*PCI_NP_CBE = cmd;
-
-	/* execute the write by writing to NP_WDATA */
-	*PCI_NP_WDATA = data;
-
-	if(check_master_abort())
-		retval = 1;
-
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-	return retval;
-}
-
-static u32 ixp4xx_config_addr(u8 bus_num, u16 devfn, int where)
-{
-	u32 addr;
-	if (!bus_num) {
-		/* type 0 */
-		addr = BIT(32-PCI_SLOT(devfn)) | ((PCI_FUNC(devfn)) << 8) | 
-		    (where & ~3);	
-	} else {
-		/* type 1 */
-		addr = (bus_num << 16) | ((PCI_SLOT(devfn)) << 11) | 
-			((PCI_FUNC(devfn)) << 8) | (where & ~3) | 1;
-	}
-	return addr;
-}
-
-/*
- * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
- * 0 and 3 are not valid indexes...
- */
-static u32 bytemask[] = {
-	/*0*/	0,
-	/*1*/	0xff,
-	/*2*/	0xffff,
-	/*3*/	0,
-	/*4*/	0xffffffff,
-};
-
-static u32 local_byte_lane_enable_bits(u32 n, int size)
-{
-	if (size == 1)
-		return (0xf & ~BIT(n)) << CRP_AD_CBE_BESL;
-	if (size == 2)
-		return (0xf & ~(BIT(n) | BIT(n+1))) << CRP_AD_CBE_BESL;
-	if (size == 4)
-		return 0;
-	return 0xffffffff;
-}
-
-static int local_read_config(int where, int size, u32 *value)
-{ 
-	u32 n, data;
-	pr_debug("local_read_config from %d size %d\n", where, size);
-	n = where % 4;
-	crp_read(where & ~3, &data);
-	*value = (data >> (8*n)) & bytemask[size];
-	pr_debug("local_read_config read %#x\n", *value);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int local_write_config(int where, int size, u32 value)
-{
-	u32 n, byte_enables, data;
-	pr_debug("local_write_config %#x to %d size %d\n", value, where, size);
-	n = where % 4;
-	byte_enables = local_byte_lane_enable_bits(n, size);
-	if (byte_enables == 0xffffffff)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-	data = value << (8*n);
-	crp_write((where & ~3) | byte_enables, data);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static u32 byte_lane_enable_bits(u32 n, int size)
-{
-	if (size == 1)
-		return (0xf & ~BIT(n)) << 4;
-	if (size == 2)
-		return (0xf & ~(BIT(n) | BIT(n+1))) << 4;
-	if (size == 4)
-		return 0;
-	return 0xffffffff;
-}
-
-static int ixp4xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
-{
-	u32 n, byte_enables, addr, data;
-	u8 bus_num = bus->number;
-
-	pr_debug("read_config from %d size %d dev %d:%d:%d\n", where, size,
-		bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
-	*value = 0xffffffff;
-	n = where % 4;
-	byte_enables = byte_lane_enable_bits(n, size);
-	if (byte_enables == 0xffffffff)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	addr = ixp4xx_config_addr(bus_num, devfn, where);
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_CONFIGREAD, &data))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	*value = (data >> (8*n)) & bytemask[size];
-	pr_debug("read_config_byte read %#x\n", *value);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int ixp4xx_pci_write_config(struct pci_bus *bus,  unsigned int devfn, int where, int size, u32 value)
-{
-	u32 n, byte_enables, addr, data;
-	u8 bus_num = bus->number;
-
-	pr_debug("write_config_byte %#x to %d size %d dev %d:%d:%d\n", value, where,
-		size, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
-	n = where % 4;
-	byte_enables = byte_lane_enable_bits(n, size);
-	if (byte_enables == 0xffffffff)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	addr = ixp4xx_config_addr(bus_num, devfn, where);
-	data = value << (8*n);
-	if (ixp4xx_pci_write(addr, byte_enables | NP_CMD_CONFIGWRITE, data))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops ixp4xx_ops = {
-	.read =  ixp4xx_pci_read_config,
-	.write = ixp4xx_pci_write_config,
-};
-
-/*
- * PCI abort handler
- */
-static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	u32 isr, status;
-
-	isr = *PCI_ISR;
-	local_read_config(PCI_STATUS, 2, &status);
-	pr_debug("PCI: abort_handler addr = %#lx, isr = %#x, "
-		"status = %#x\n", addr, isr, status);
-
-	/* make sure the Master Abort bit is reset */    
-	*PCI_ISR = PCI_ISR_PFE;
-	status |= PCI_STATUS_REC_MASTER_ABORT;
-	local_write_config(PCI_STATUS, 2, status);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-void __init ixp4xx_pci_preinit(void)
-{
-	unsigned long cpuid = read_cpuid_id();
-
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-	pcibios_min_mem = 0x10000000; /* 1 GB of indirect PCI MMIO space */
-#else
-	pcibios_min_mem = 0x48000000; /* 64 MB of PCI MMIO space */
-#endif
-	/*
-	 * Determine which PCI read method to use.
-	 * Rev 0 IXP425 requires workaround.
-	 */
-	if (!(cpuid & 0xf) && cpu_is_ixp42x()) {
-		printk("PCI: IXP42x A0 silicon detected - "
-			"PCI Non-Prefetch Workaround Enabled\n");
-		ixp4xx_pci_read = ixp4xx_pci_read_errata;
-	} else
-		ixp4xx_pci_read = ixp4xx_pci_read_no_errata;
-
-
-	/* hook in our fault handler for PCI errors */
-	hook_fault_code(16+6, abort_handler, SIGBUS, 0,
-			"imprecise external abort");
-
-	pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n");
-
-	/*
-	 * We use identity AHB->PCI address translation
-	 * in the 0x48000000 to 0x4bffffff address space
-	 */
-	*PCI_PCIMEMBASE = 0x48494A4B;
-
-	/*
-	 * We also use identity PCI->AHB address translation
-	 * in 4 16MB BARs that begin at the physical memory start
-	 */
-	*PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) +
-		((PHYS_OFFSET & 0xFF000000) >> 8) +
-		((PHYS_OFFSET & 0xFF000000) >> 16) +
-		((PHYS_OFFSET & 0xFF000000) >> 24) +
-		0x00010203;
-
-	if (*PCI_CSR & PCI_CSR_HOST) {
-		printk("PCI: IXP4xx is host\n");
-
-		pr_debug("setup BARs in controller\n");
-
-		/*
-		 * We configure the PCI inbound memory windows to be
-		 * 1:1 mapped to SDRAM
-		 */
-		local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET);
-		local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M);
-		local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M);
-		local_write_config(PCI_BASE_ADDRESS_3, 4,
-					PHYS_OFFSET + SZ_32M + SZ_16M);
-
-		/*
-		 * Enable CSR window at 64 MiB to allow PCI masters
-		 * to continue prefetching past 64 MiB boundary.
-		 */
-		local_write_config(PCI_BASE_ADDRESS_4, 4, PHYS_OFFSET + SZ_64M);
-
-		/*
-		 * Enable the IO window to be way up high, at 0xfffffc00
-		 */
-		local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01);
-		local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */
-	} else {
-		printk("PCI: IXP4xx is target - No bus scan performed\n");
-	}
-
-	printk("PCI: IXP4xx Using %s access for memory space\n",
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-			"direct"
-#else
-			"indirect"
-#endif
-		);
-
-	pr_debug("clear error bits in ISR\n");
-	*PCI_ISR = PCI_ISR_PSE | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE;
-
-	/*
-	 * Set Initialize Complete in PCI Control Register: allow IXP4XX to
-	 * respond to PCI configuration cycles. Specify that the AHB bus is
-	 * operating in big endian mode. Set up byte lane swapping between 
-	 * little-endian PCI and the big-endian AHB bus 
-	 */
-#ifdef __ARMEB__
-	*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
-#else
-	*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE;
-#endif
-
-	pr_debug("DONE\n");
-}
-
-int ixp4xx_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if (nr >= 1)
-		return 0;
-
-	res = kcalloc(2, sizeof(*res), GFP_KERNEL);
-	if (res == NULL) {
-		/* 
-		 * If we're out of memory this early, something is wrong,
-		 * so we might as well catch it here.
-		 */
-		panic("PCI: unable to allocate resources?\n");
-	}
-
-	local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-
-	res[0].name = "PCI I/O Space";
-	res[0].start = 0x00000000;
-	res[0].end = 0x0000ffff;
-	res[0].flags = IORESOURCE_IO;
-
-	res[1].name = "PCI Memory Space";
-	res[1].start = PCIBIOS_MIN_MEM;
-	res[1].end = PCIBIOS_MAX_MEM;
-	res[1].flags = IORESOURCE_MEM;
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
-
-	return 1;
-}
-
-EXPORT_SYMBOL(ixp4xx_pci_read);
-EXPORT_SYMBOL(ixp4xx_pci_write);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
deleted file mode 100644
index 000f672a94c9..000000000000
--- a/arch/arm/mach-ixp4xx/common.c
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/common.c
- *
- * Generic code shared across all IXP4XX platforms
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 (c) Intel Corporation
- * Copyright 2003-2004 (c) MontaVista, Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/cpu.h>
-#include <linux/pci.h>
-#include <linux/sched_clock.h>
-#include <linux/irqchip/irq-ixp4xx.h>
-#include <linux/platform_data/timer-ixp4xx.h>
-#include <linux/dma-map-ops.h>
-#include <mach/udc.h>
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <linux/uaccess.h>
-#include <asm/page.h>
-#include <asm/exception.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include "irqs.h"
-
-#define IXP4XX_TIMER_FREQ 66666000
-
-/*************************************************************************
- * IXP4xx chipset I/O mapping
- *************************************************************************/
-static struct map_desc ixp4xx_io_desc[] __initdata = {
-	{	/* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
-		.virtual	= (unsigned long)IXP4XX_PERIPHERAL_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
-		.length		= IXP4XX_PERIPHERAL_REGION_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* Expansion Bus Config Registers */
-		.virtual	= (unsigned long)IXP4XX_EXP_CFG_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
-		.length		= IXP4XX_EXP_CFG_REGION_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* PCI Registers */
-		.virtual	= (unsigned long)IXP4XX_PCI_CFG_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
-		.length		= IXP4XX_PCI_CFG_REGION_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init ixp4xx_map_io(void)
-{
-  	iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
-}
-
-void __init ixp4xx_init_irq(void)
-{
-	/*
-	 * ixp4xx does not implement the XScale PWRMODE register
-	 * so it must not call cpu_do_idle().
-	 */
-	cpu_idle_poll_ctrl(true);
-
-	ixp4xx_irq_init(IXP4XX_INTC_BASE_PHYS,
-			(cpu_is_ixp46x() || cpu_is_ixp43x()));
-}
-
-void __init ixp4xx_timer_init(void)
-{
-	return ixp4xx_timer_setup(IXP4XX_TIMER_BASE_PHYS,
-				  IRQ_IXP4XX_TIMER1,
-				  IXP4XX_TIMER_FREQ);
-}
-
-static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
-
-void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info)
-{
-	memcpy(&ixp4xx_udc_info, info, sizeof *info);
-}
-
-static struct resource ixp4xx_udc_resources[] = {
-	[0] = {
-		.start  = 0xc800b000,
-		.end    = 0xc800bfff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_IXP4XX_USB,
-		.end    = IRQ_IXP4XX_USB,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource ixp4xx_gpio_resource[] = {
-	{
-		.start = IXP4XX_GPIO_BASE_PHYS,
-		.end = IXP4XX_GPIO_BASE_PHYS + 0xfff,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ixp4xx_gpio_device = {
-	.name           = "ixp4xx-gpio",
-	.id             = -1,
-	.dev = {
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.resource = ixp4xx_gpio_resource,
-	.num_resources  = ARRAY_SIZE(ixp4xx_gpio_resource),
-};
-
-/*
- * USB device controller. The IXP4xx uses the same controller as PXA25X,
- * so we just use the same device.
- */
-static struct platform_device ixp4xx_udc_device = {
-	.name           = "pxa25x-udc",
-	.id             = -1,
-	.num_resources  = 2,
-	.resource       = ixp4xx_udc_resources,
-	.dev            = {
-		.platform_data = &ixp4xx_udc_info,
-	},
-};
-
-static struct resource ixp4xx_npe_resources[] = {
-	{
-		.start = IXP4XX_NPEA_BASE_PHYS,
-		.end = IXP4XX_NPEA_BASE_PHYS + 0xfff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IXP4XX_NPEB_BASE_PHYS,
-		.end = IXP4XX_NPEB_BASE_PHYS + 0xfff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IXP4XX_NPEC_BASE_PHYS,
-		.end = IXP4XX_NPEC_BASE_PHYS + 0xfff,
-		.flags = IORESOURCE_MEM,
-	},
-
-};
-
-static struct platform_device ixp4xx_npe_device = {
-	.name           = "ixp4xx-npe",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(ixp4xx_npe_resources),
-	.resource       = ixp4xx_npe_resources,
-};
-
-static struct resource ixp4xx_qmgr_resources[] = {
-	{
-		.start = IXP4XX_QMGR_BASE_PHYS,
-		.end = IXP4XX_QMGR_BASE_PHYS + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_IXP4XX_QM1,
-		.end = IRQ_IXP4XX_QM1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_IXP4XX_QM2,
-		.end = IRQ_IXP4XX_QM2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ixp4xx_qmgr_device = {
-	.name           = "ixp4xx-qmgr",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(ixp4xx_qmgr_resources),
-	.resource       = ixp4xx_qmgr_resources,
-};
-
-static struct platform_device *ixp4xx_devices[] __initdata = {
-	&ixp4xx_npe_device,
-	&ixp4xx_qmgr_device,
-	&ixp4xx_gpio_device,
-	&ixp4xx_udc_device,
-};
-
-static struct resource ixp46x_i2c_resources[] = {
-	[0] = {
-		.start 	= 0xc8011000,
-		.end	= 0xc801101c,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start 	= IRQ_IXP4XX_I2C,
-		.end	= IRQ_IXP4XX_I2C,
-		.flags	= IORESOURCE_IRQ
-	}
-};
-
-/*
- * I2C controller. The IXP46x uses the same block as the IOP3xx, so
- * we just use the same device name.
- */
-static struct platform_device ixp46x_i2c_controller = {
-	.name		= "IOP3xx-I2C",
-	.id		= 0,
-	.num_resources	= 2,
-	.resource	= ixp46x_i2c_resources
-};
-
-static struct platform_device *ixp46x_devices[] __initdata = {
-	&ixp46x_i2c_controller
-};
-
-unsigned long ixp4xx_exp_bus_size;
-EXPORT_SYMBOL(ixp4xx_exp_bus_size);
-
-void __init ixp4xx_sys_init(void)
-{
-	ixp4xx_exp_bus_size = SZ_16M;
-
-	platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
-
-	if (cpu_is_ixp46x()) {
-		int region;
-
-		platform_add_devices(ixp46x_devices,
-				ARRAY_SIZE(ixp46x_devices));
-
-		for (region = 0; region < 7; region++) {
-			if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) {
-				ixp4xx_exp_bus_size = SZ_32M;
-				break;
-			}
-		}
-	}
-
-	printk("IXP4xx: Using %luMiB expansion bus window size\n",
-			ixp4xx_exp_bus_size >> 20);
-}
-
-unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
-EXPORT_SYMBOL(ixp4xx_timer_freq);
-
-void ixp4xx_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (mode == REBOOT_SOFT) {
-		/* Jump into ROM at address 0 */
-		soft_restart(0);
-	} else {
-		/* Use on-chip reset capability */
-
-		/* set the "key" register to enable access to
-		 * "timer" and "enable" registers
-		 */
-		*IXP4XX_OSWK = IXP4XX_WDT_KEY;
-
-		/* write 0 to the timer register for an immediate reset */
-		*IXP4XX_OSWT = 0;
-
-		*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
-	}
-}
-
-#ifdef CONFIG_PCI
-static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
-	return (dma_addr + size) > SZ_64M;
-}
-
-static int ixp4xx_platform_notify_remove(struct device *dev)
-{
-	if (dev_is_pci(dev))
-		dmabounce_unregister_dev(dev);
-
-	return 0;
-}
-#endif
-
-/*
- * Setup DMA mask to 64MB on PCI devices and 4 GB on all other things.
- */
-static int ixp4xx_platform_notify(struct device *dev)
-{
-	dev->dma_mask = &dev->coherent_dma_mask;
-
-#ifdef CONFIG_PCI
-	if (dev_is_pci(dev)) {
-		dev->coherent_dma_mask = DMA_BIT_MASK(28); /* 64 MB */
-		dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce);
-		return 0;
-	}
-#endif
-
-	dev->coherent_dma_mask = DMA_BIT_MASK(32);
-	return 0;
-}
-
-int dma_set_coherent_mask(struct device *dev, u64 mask)
-{
-	if (dev_is_pci(dev))
-		mask &= DMA_BIT_MASK(28); /* 64 MB */
-
-	if ((mask & DMA_BIT_MASK(28)) == DMA_BIT_MASK(28)) {
-		dev->coherent_dma_mask = mask;
-		return 0;
-	}
-
-	return -EIO;		/* device wanted sub-64MB mask */
-}
-EXPORT_SYMBOL(dma_set_coherent_mask);
-
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-/*
- * In the case of using indirect PCI, we simply return the actual PCI
- * address and our read/write implementation use that to drive the
- * access registers. If something outside of PCI is ioremap'd, we
- * fallback to the default.
- */
-
-static void __iomem *ixp4xx_ioremap_caller(phys_addr_t addr, size_t size,
-					   unsigned int mtype, void *caller)
-{
-	if (!is_pci_memory(addr))
-		return __arm_ioremap_caller(addr, size, mtype, caller);
-
-	return (void __iomem *)addr;
-}
-
-static void ixp4xx_iounmap(volatile void __iomem *addr)
-{
-	if (!is_pci_memory((__force u32)addr))
-		__iounmap(addr);
-}
-#endif
-
-void __init ixp4xx_init_early(void)
-{
-	platform_notify = ixp4xx_platform_notify;
-#ifdef CONFIG_PCI
-	platform_notify_remove = ixp4xx_platform_notify_remove;
-#endif
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-	arch_ioremap_caller = ixp4xx_ioremap_caller;
-	arch_iounmap = ixp4xx_iounmap;
-#endif
-}
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
deleted file mode 100644
index c250b59e8d47..000000000000
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/coyote-pci.c
- *
- * PCI setup routines for ADI Engineering Coyote platform
- *
- * Copyright (C) 2002 Jungo Software Technologies.
- * Copyright (C) 2003 MontaVista Softwrae, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@mvista.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-
-#include "irqs.h"
-
-#define SLOT0_DEVID	14
-#define SLOT1_DEVID	15
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define SLOT0_INTA	6
-#define SLOT1_INTA	11
-
-void __init coyote_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init coyote_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (slot == SLOT0_DEVID)
-		return IXP4XX_GPIO_IRQ(SLOT0_INTA);
-	else if (slot == SLOT1_DEVID)
-		return IXP4XX_GPIO_IRQ(SLOT1_INTA);
-	else return -1;
-}
-
-struct hw_pci coyote_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit =        coyote_pci_preinit,
-	.setup =          ixp4xx_setup,
-	.map_irq =        coyote_map_irq,
-};
-
-int __init coyote_pci_init(void)
-{
-	if (machine_is_adi_coyote())
-		pci_common_init(&coyote_pci);
-	return 0;
-}
-
-subsys_initcall(coyote_pci_init);
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
deleted file mode 100644
index 7ca43ca2816d..000000000000
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ /dev/null
@@ -1,144 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/coyote-setup.c
- *
- * Board setup for ADI Engineering and IXDGP425 boards
- *
- * Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-#define COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
-#define COYOTE_IDE_BASE_VIRT	0xFFFE1000
-#define COYOTE_IDE_REGION_SIZE	0x1000
-
-#define COYOTE_IDE_DATA_PORT	0xFFFE10E0
-#define COYOTE_IDE_CTRL_PORT	0xFFFE10FC
-#define COYOTE_IDE_ERROR_PORT	0xFFFE10E2
-#define IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
-
-static struct flash_platform_data coyote_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource coyote_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device coyote_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &coyote_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &coyote_flash_resource,
-};
-
-static struct resource coyote_uart_resource = {
-	.start	= IXP4XX_UART2_BASE_PHYS,
-	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct plat_serial8250_port coyote_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device coyote_uart = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= coyote_uart_data,
-	},
-	.num_resources	= 1,
-	.resource	= &coyote_uart_resource,
-};
-
-static struct platform_device *coyote_devices[] __initdata = {
-	&coyote_flash,
-	&coyote_uart
-};
-
-static void __init coyote_init(void)
-{
-	ixp4xx_sys_init();
-
-	coyote_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	coyote_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-
-	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
-	if (machine_is_ixdpg425()) {
-		coyote_uart_data[0].membase =
-			(char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET);
-		coyote_uart_data[0].mapbase = IXP4XX_UART1_BASE_PHYS;
-		coyote_uart_data[0].irq = IRQ_IXP4XX_UART1;
-	}
-
-	platform_add_devices(coyote_devices, ARRAY_SIZE(coyote_devices));
-}
-
-#ifdef CONFIG_ARCH_ADI_COYOTE
-MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= coyote_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
-/*
- * IXDPG425 is identical to Coyote except for which serial port
- * is connected.
- */
-#ifdef CONFIG_MACH_IXDPG425
-MACHINE_START(IXDPG425, "Intel IXDPG425")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= coyote_init,
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c
deleted file mode 100644
index e997d97f619e..000000000000
--- a/arch/arm/mach-ixp4xx/dsmg600-pci.c
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * DSM-G600 board-level PCI initialization
- *
- * Copyright (C) 2006 Tower Technologies
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- * based on ixdp425-pci.c:
- *	Copyright (C) 2002 Intel Corporation.
- *	Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Maintainer: http://www.nslu2-linux.org/
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#include "irqs.h"
-
-#define MAX_DEV		4
-#define IRQ_LINES	3
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA		11
-#define INTB		10
-#define INTC		9
-#define INTD		8
-#define INTE		7
-#define INTF		6
-
-void __init dsmg600_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTF), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init dsmg600_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[MAX_DEV][IRQ_LINES] = {
-		{ IXP4XX_GPIO_IRQ(INTE), -1, -1 },
-		{ IXP4XX_GPIO_IRQ(INTA), -1, -1 },
-		{ IXP4XX_GPIO_IRQ(INTB), IXP4XX_GPIO_IRQ(INTC),
-		  IXP4XX_GPIO_IRQ(INTD) },
-		{ IXP4XX_GPIO_IRQ(INTF), -1, -1 },
-	};
-
-	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-		return pci_irq_table[slot - 1][pin - 1];
-
-	return -1;
-}
-
-struct hw_pci __initdata dsmg600_pci = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit	= dsmg600_pci_preinit,
-	.setup		= ixp4xx_setup,
-	.map_irq	= dsmg600_map_irq,
-};
-
-int __init dsmg600_pci_init(void)
-{
-	if (machine_is_dsmg600())
-		pci_common_init(&dsmg600_pci);
-
-	return 0;
-}
-
-subsys_initcall(dsmg600_pci_init);
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
deleted file mode 100644
index 4d4c62fced71..000000000000
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ /dev/null
@@ -1,304 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * DSM-G600 board-setup
- *
- * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
- * Copyright (C) 2006 Tower Technologies
- *
- * based on ixdp425-setup.c:
- *      Copyright (C) 2003-2004 MontaVista Software, Inc.
- * based on nslu2-power.c:
- *	Copyright (C) 2005 Tower Technologies
- * based on nslu2-io.c:
- *	Copyright (C) 2004 Karen Spearel
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Author: Michael Westerhof <mwester@dls.net>
- * Author: Rod Whitby <rod@whitby.id.au>
- * Maintainers: http://www.nslu2-linux.org/
- */
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/leds.h>
-#include <linux/reboot.h>
-#include <linux/i2c.h>
-#include <linux/gpio/machine.h>
-
-#include <mach/hardware.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/time.h>
-
-#include "irqs.h"
-
-#define DSMG600_SDA_PIN		5
-#define DSMG600_SCL_PIN		4
-
-/* DSM-G600 Timer Setting */
-#define DSMG600_FREQ		66000000
-
-/* Buttons */
-#define DSMG600_PB_GPIO		15	/* power button */
-#define DSMG600_RB_GPIO		3	/* reset button */
-
-/* Power control */
-#define DSMG600_PO_GPIO		2	/* power off */
-
-/* LEDs */
-#define DSMG600_LED_PWR_GPIO	0
-#define DSMG600_LED_WLAN_GPIO	14
-
-static struct flash_platform_data dsmg600_flash_data = {
-	.map_name		= "cfi_probe",
-	.width			= 2,
-};
-
-static struct resource dsmg600_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device dsmg600_flash = {
-	.name			= "IXP4XX-Flash",
-	.id			= 0,
-	.dev.platform_data	= &dsmg600_flash_data,
-	.num_resources		= 1,
-	.resource		= &dsmg600_flash_resource,
-};
-
-static struct gpiod_lookup_table dsmg600_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio.0",
-	.table		= {
-		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SDA_PIN,
-				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SCL_PIN,
-				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct platform_device dsmg600_i2c_gpio = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev	 = {
-		.platform_data	= NULL,
-	},
-};
-
-static struct i2c_board_info __initdata dsmg600_i2c_board_info [] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-static struct gpio_led dsmg600_led_pins[] = {
-	{
-		.name		= "dsmg600:green:power",
-		.gpio		= DSMG600_LED_PWR_GPIO,
-	},
-	{
-		.name		= "dsmg600:green:wlan",
-		.gpio		= DSMG600_LED_WLAN_GPIO,
-		.active_low	= true,
-	},
-};
-
-static struct gpio_led_platform_data dsmg600_led_data = {
-	.num_leds		= ARRAY_SIZE(dsmg600_led_pins),
-	.leds			= dsmg600_led_pins,
-};
-
-static struct platform_device dsmg600_leds = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &dsmg600_led_data,
-};
-
-static struct resource dsmg600_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct plat_serial8250_port dsmg600_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ }
-};
-
-static struct platform_device dsmg600_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= dsmg600_uart_data,
-	.num_resources		= ARRAY_SIZE(dsmg600_uart_resources),
-	.resource		= dsmg600_uart_resources,
-};
-
-static struct platform_device *dsmg600_devices[] __initdata = {
-	&dsmg600_i2c_gpio,
-	&dsmg600_flash,
-	&dsmg600_leds,
-};
-
-static void dsmg600_power_off(void)
-{
-	/* enable the pwr cntl and drive it high */
-	gpio_direction_output(DSMG600_PO_GPIO, 1);
-}
-
-/* This is used to make sure the power-button pusher is serious.  The button
- * must be held until the value of this counter reaches zero.
- */
-static int power_button_countdown;
-
-/* Must hold the button down for at least this many counts to be processed */
-#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
-
-static void dsmg600_power_handler(struct timer_list *unused);
-static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler);
-
-static void dsmg600_power_handler(struct timer_list *unused)
-{
-	/* This routine is called twice per second to check the
-	 * state of the power button.
-	 */
-
-	if (gpio_get_value(DSMG600_PB_GPIO)) {
-
-		/* IO Pin is 1 (button pushed) */
-		if (power_button_countdown > 0)
-			power_button_countdown--;
-
-	} else {
-
-		/* Done on button release, to allow for auto-power-on mods. */
-		if (power_button_countdown == 0) {
-			/* Signal init to do the ctrlaltdel action,
-			 * this will bypass init if it hasn't started
-			 * and do a kernel_restart.
-			 */
-			ctrl_alt_del();
-
-			/* Change the state of the power LED to "blink" */
-			gpio_set_value(DSMG600_LED_PWR_GPIO, 0);
-		} else {
-			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-		}
-	}
-
-	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-}
-
-static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
-{
-	/* This is the paper-clip reset, it shuts the machine down directly. */
-	machine_power_off();
-
-	return IRQ_HANDLED;
-}
-
-static void __init dsmg600_timer_init(void)
-{
-    /* The xtal on this machine is non-standard. */
-    ixp4xx_timer_freq = DSMG600_FREQ;
-
-    /* Call standard timer_init function. */
-    ixp4xx_timer_init();
-}
-
-static int __init dsmg600_gpio_init(void)
-{
-	if (!machine_is_dsmg600())
-		return 0;
-
-	gpio_request(DSMG600_RB_GPIO, "reset button");
-	if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
-		IRQF_TRIGGER_LOW, "DSM-G600 reset button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-			gpio_to_irq(DSMG600_RB_GPIO));
-	}
-
-	/*
-	 * The power button on the D-Link DSM-G600 is on GPIO 15, but
-	 * it cannot handle interrupts on that GPIO line.  So we'll
-	 * have to poll it with a kernel timer.
-	 */
-
-	/* Make sure that the power button GPIO is set up as an input */
-	gpio_request(DSMG600_PB_GPIO, "power button");
-	gpio_direction_input(DSMG600_PB_GPIO);
-	/* Request poweroff GPIO line */
-	gpio_request(DSMG600_PO_GPIO, "power off button");
-
-	/* Set the initial value for the power button IRQ handler */
-	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
-	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-	return 0;
-}
-device_initcall(dsmg600_gpio_init);
-
-static void __init dsmg600_init(void)
-{
-	ixp4xx_sys_init();
-
-	dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	dsmg600_flash_resource.end =
-		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-	gpiod_add_lookup_table(&dsmg600_i2c_gpiod_table);
-	i2c_register_board_info(0, dsmg600_i2c_board_info,
-				ARRAY_SIZE(dsmg600_i2c_board_info));
-
-	/* The UART is required on the DSM-G600 (Redboot cannot use the
-	 * NIC) -- do it here so that it does *not* get removed if
-	 * platform_add_devices fails!
-         */
-        (void)platform_device_register(&dsmg600_uart);
-
-	platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
-
-	pm_power_off = dsmg600_power_off;
-}
-
-MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
-	/* Maintainer: www.nslu2-linux.org */
-	.atag_offset	= 0x100,
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= dsmg600_timer_init,
-	.init_machine	= dsmg600_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
deleted file mode 100644
index 4122a61aae70..000000000000
--- a/arch/arm/mach-ixp4xx/fsg-pci.c
+++ /dev/null
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arch/mach-ixp4xx/fsg-pci.c
- *
- * FSG board-level PCI initialization
- *
- * Author: Rod Whitby <rod@whitby.id.au>
- * Maintainer: http://www.nslu2-linux.org/
- *
- * based on ixdp425-pci.c:
- *	Copyright (C) 2002 Intel Corporation.
- *	Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#include "irqs.h"
-
-#define MAX_DEV		3
-#define IRQ_LINES	3
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA	6
-#define INTB	7
-#define INTC	5
-
-void __init fsg_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init fsg_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[IRQ_LINES] = {
-		IXP4XX_GPIO_IRQ(INTC),
-		IXP4XX_GPIO_IRQ(INTB),
-		IXP4XX_GPIO_IRQ(INTA),
-	};
-
-	int irq = -1;
-	slot -= 11;
-
-	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-		irq = pci_irq_table[slot - 1];
-	printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n",
-	       __func__, slot, pin, irq);
-
-	return irq;
-}
-
-struct hw_pci fsg_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit =	  fsg_pci_preinit,
-	.setup =	  ixp4xx_setup,
-	.map_irq =	  fsg_map_irq,
-};
-
-int __init fsg_pci_init(void)
-{
-	if (machine_is_fsg())
-		pci_common_init(&fsg_pci);
-	return 0;
-}
-
-subsys_initcall(fsg_pci_init);
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
deleted file mode 100644
index 507ee3878769..000000000000
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ /dev/null
@@ -1,310 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/fsg-setup.c
- *
- * FSG board-setup
- *
- * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
- *
- * based on ixdp425-setup.c:
- *	Copyright (C) 2003-2004 MontaVista Software, Inc.
- * based on nslu2-power.c
- *	Copyright (C) 2005 Tower Technologies
- *
- * Author: Rod Whitby <rod@whitby.id.au>
- * Maintainers: http://www.nslu2-linux.org/
- *
- */
-#include <linux/gpio.h>
-#include <linux/if_ether.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/leds.h>
-#include <linux/reboot.h>
-#include <linux/i2c.h>
-#include <linux/gpio/machine.h>
-#include <linux/io.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-#define FSG_SDA_PIN		12
-#define FSG_SCL_PIN		13
-
-#define FSG_SB_GPIO		4	/* sync button */
-#define FSG_RB_GPIO		9	/* reset button */
-#define FSG_UB_GPIO		10	/* usb button */
-
-static struct flash_platform_data fsg_flash_data = {
-	.map_name		= "cfi_probe",
-	.width			= 2,
-};
-
-static struct resource fsg_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device fsg_flash = {
-	.name			= "IXP4XX-Flash",
-	.id			= 0,
-	.dev = {
-		.platform_data	= &fsg_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &fsg_flash_resource,
-};
-
-static struct gpiod_lookup_table fsg_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio.0",
-	.table		= {
-		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", FSG_SDA_PIN,
-				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", FSG_SCL_PIN,
-				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct platform_device fsg_i2c_gpio = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev = {
-		.platform_data	= NULL,
-	},
-};
-
-static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
-	{
-		I2C_BOARD_INFO("isl1208", 0x6f),
-	},
-};
-
-static struct resource fsg_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct plat_serial8250_port fsg_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ }
-};
-
-static struct platform_device fsg_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data	= fsg_uart_data,
-	},
-	.num_resources		= ARRAY_SIZE(fsg_uart_resources),
-	.resource		= fsg_uart_resources,
-};
-
-static struct platform_device fsg_leds = {
-	.name		= "fsg-led",
-	.id		= -1,
-};
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct resource fsg_eth_npeb_resources[] = {
-	{
-		.start		= IXP4XX_EthB_BASE_PHYS,
-		.end		= IXP4XX_EthB_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource fsg_eth_npec_resources[] = {
-	{
-		.start		= IXP4XX_EthC_BASE_PHYS,
-		.end		= IXP4XX_EthC_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct eth_plat_info fsg_plat_eth[] = {
-	{
-		.phy		= 5,
-		.rxq		= 3,
-		.txreadyq	= 20,
-	}, {
-		.phy		= 4,
-		.rxq		= 4,
-		.txreadyq	= 21,
-	}
-};
-
-static struct platform_device fsg_eth[] = {
-	{
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev = {
-			.platform_data	= fsg_plat_eth,
-		},
-		.num_resources	= ARRAY_SIZE(fsg_eth_npeb_resources),
-		.resource	= fsg_eth_npeb_resources,
-	}, {
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEC,
-		.dev = {
-			.platform_data	= fsg_plat_eth + 1,
-		},
-		.num_resources	= ARRAY_SIZE(fsg_eth_npec_resources),
-		.resource	= fsg_eth_npec_resources,
-	}
-};
-
-static struct platform_device *fsg_devices[] __initdata = {
-	&fsg_i2c_gpio,
-	&fsg_flash,
-	&fsg_leds,
-	&fsg_eth[0],
-	&fsg_eth[1],
-};
-
-static irqreturn_t fsg_power_handler(int irq, void *dev_id)
-{
-	/* Signal init to do the ctrlaltdel action, this will bypass init if
-	 * it hasn't started and do a kernel_restart.
-	 */
-	ctrl_alt_del();
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
-{
-	/* This is the paper-clip reset which does an emergency reboot. */
-	printk(KERN_INFO "Restarting system.\n");
-	machine_restart(NULL);
-
-	/* This should never be reached. */
-	return IRQ_HANDLED;
-}
-
-static void __init fsg_init(void)
-{
-	uint8_t __iomem *f;
-
-	ixp4xx_sys_init();
-
-	fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	fsg_flash_resource.end =
-		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
-	/* Configure CS2 for operation, 8bit and writable */
-	*IXP4XX_EXP_CS2 = 0xbfff0002;
-
-	gpiod_add_lookup_table(&fsg_i2c_gpiod_table);
-	i2c_register_board_info(0, fsg_i2c_board_info,
-				ARRAY_SIZE(fsg_i2c_board_info));
-
-	/* This is only useful on a modified machine, but it is valuable
-	 * to have it first in order to see debug messages, and so that
-	 * it does *not* get removed if platform_add_devices fails!
-	 */
-	(void)platform_device_register(&fsg_uart);
-
-	platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices));
-
-	if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler,
-			IRQF_TRIGGER_LOW, "FSG reset button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-			gpio_to_irq(FSG_RB_GPIO));
-	}
-
-	if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler,
-			IRQF_TRIGGER_LOW, "FSG power button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Power Button IRQ %d not available\n",
-			gpio_to_irq(FSG_SB_GPIO));
-	}
-
-	/*
-	 * Map in a portion of the flash and read the MAC addresses.
-	 * Since it is stored in BE in the flash itself, we need to
-	 * byteswap it if we're in LE mode.
-	 */
-	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
-	if (f) {
-#ifdef __ARMEB__
-		int i;
-		for (i = 0; i < 6; i++) {
-			fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
-			fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
-		}
-#else
-
-		/*
-		  Endian-swapped reads from unaligned addresses are
-		  required to extract the two MACs from the big-endian
-		  Redboot config area in flash.
-		*/
-
-		fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421);
-		fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420);
-		fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427);
-		fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426);
-		fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425);
-		fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424);
-
-		fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439);
-		fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F);
-		fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E);
-		fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D);
-		fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C);
-		fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443);
-#endif
-		iounmap(f);
-	}
-	printk(KERN_INFO "FSG: Using MAC address %pM for port 0\n",
-	       fsg_plat_eth[0].hwaddr);
-	printk(KERN_INFO "FSG: Using MAC address %pM for port 1\n",
-	       fsg_plat_eth[1].hwaddr);
-
-}
-
-MACHINE_START(FSG, "Freecom FSG-3")
-	/* Maintainer: www.nslu2-linux.org */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= fsg_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
deleted file mode 100644
index 3c3ee9dad6d8..000000000000
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arch/mach-ixp4xx/gateway7001-pci.c
- *
- * PCI setup routines for Gateway 7001
- *
- * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
- *
- * based on coyote-pci.c:
- *	Copyright (C) 2002 Jungo Software Technologies.
- *	Copyright (C) 2003 MontaVista Softwrae, Inc.
- *
- * Maintainer: Imre Kaloz <kaloz@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-#include "irqs.h"
-
-void __init gateway7001_pci_preinit(void)
-{
-	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-
-	ixp4xx_pci_preinit();
-}
-
-static int __init gateway7001_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	if (slot == 1)
-		return IRQ_IXP4XX_GPIO11;
-	else if (slot == 2)
-		return IRQ_IXP4XX_GPIO10;
-	else return -1;
-}
-
-struct hw_pci gateway7001_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit =        gateway7001_pci_preinit,
-	.setup =          ixp4xx_setup,
-	.map_irq =        gateway7001_map_irq,
-};
-
-int __init gateway7001_pci_init(void)
-{
-	if (machine_is_gateway7001())
-		pci_common_init(&gateway7001_pci);
-	return 0;
-}
-
-subsys_initcall(gateway7001_pci_init);
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
deleted file mode 100644
index 678e7dfff0e5..000000000000
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/gateway7001-setup.c
- *
- * Board setup for the Gateway 7001 board
- *
- * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
- *
- * based on coyote-setup.c:
- *      Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Imre Kaloz <Kaloz@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-static struct flash_platform_data gateway7001_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource gateway7001_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device gateway7001_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &gateway7001_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &gateway7001_flash_resource,
-};
-
-static struct resource gateway7001_uart_resource = {
-	.start	= IXP4XX_UART2_BASE_PHYS,
-	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct plat_serial8250_port gateway7001_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device gateway7001_uart = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= gateway7001_uart_data,
-	},
-	.num_resources	= 1,
-	.resource	= &gateway7001_uart_resource,
-};
-
-static struct platform_device *gateway7001_devices[] __initdata = {
-	&gateway7001_flash,
-	&gateway7001_uart
-};
-
-static void __init gateway7001_init(void)
-{
-	ixp4xx_sys_init();
-
-	gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-
-	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
-	platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
-}
-
-#ifdef CONFIG_MACH_GATEWAY7001
-MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
-	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= gateway7001_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
deleted file mode 100644
index 07b50dfcc489..000000000000
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ /dev/null
@@ -1,532 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Goramo MultiLink router platform code
- * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl>
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/hdlc.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/platform_data/wan_ixp4xx_hss.h>
-#include <linux/serial_8250.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/pci.h>
-#include <asm/system_info.h>
-
-#include "irqs.h"
-
-#define SLOT_ETHA		0x0B	/* IDSEL = AD21 */
-#define SLOT_ETHB		0x0C	/* IDSEL = AD20 */
-#define SLOT_MPCI		0x0D	/* IDSEL = AD19 */
-#define SLOT_NEC		0x0E	/* IDSEL = AD18 */
-
-/* GPIO lines */
-#define GPIO_SCL		0
-#define GPIO_SDA		1
-#define GPIO_STR		2
-#define GPIO_IRQ_NEC		3
-#define GPIO_IRQ_ETHA		4
-#define GPIO_IRQ_ETHB		5
-#define GPIO_HSS0_DCD_N		6
-#define GPIO_HSS1_DCD_N		7
-#define GPIO_UART0_DCD		8
-#define GPIO_UART1_DCD		9
-#define GPIO_HSS0_CTS_N		10
-#define GPIO_HSS1_CTS_N		11
-#define GPIO_IRQ_MPCI		12
-#define GPIO_HSS1_RTS_N		13
-#define GPIO_HSS0_RTS_N		14
-/* GPIO15 is not connected */
-
-/* Control outputs from 74HC4094 */
-#define CONTROL_HSS0_CLK_INT	0
-#define CONTROL_HSS1_CLK_INT	1
-#define CONTROL_HSS0_DTR_N	2
-#define CONTROL_HSS1_DTR_N	3
-#define CONTROL_EXT		4
-#define CONTROL_AUTO_RESET	5
-#define CONTROL_PCI_RESET_N	6
-#define CONTROL_EEPROM_WC_N	7
-
-/* offsets from start of flash ROM = 0x50000000 */
-#define CFG_ETH0_ADDRESS	0x40 /* 6 bytes */
-#define CFG_ETH1_ADDRESS	0x46 /* 6 bytes */
-#define CFG_REV			0x4C /* u32 */
-#define CFG_SDRAM_SIZE		0x50 /* u32 */
-#define CFG_SDRAM_CONF		0x54 /* u32 */
-#define CFG_SDRAM_MODE		0x58 /* u32 */
-#define CFG_SDRAM_REFRESH	0x5C /* u32 */
-
-#define CFG_HW_BITS		0x60 /* u32 */
-#define  CFG_HW_USB_PORTS	0x00000007 /* 0 = no NEC chip, 1-5 = ports # */
-#define  CFG_HW_HAS_PCI_SLOT	0x00000008
-#define  CFG_HW_HAS_ETH0	0x00000010
-#define  CFG_HW_HAS_ETH1	0x00000020
-#define  CFG_HW_HAS_HSS0	0x00000040
-#define  CFG_HW_HAS_HSS1	0x00000080
-#define  CFG_HW_HAS_UART0	0x00000100
-#define  CFG_HW_HAS_UART1	0x00000200
-#define  CFG_HW_HAS_EEPROM	0x00000400
-
-#define FLASH_CMD_READ_ARRAY	0xFF
-#define FLASH_CMD_READ_ID	0x90
-#define FLASH_SER_OFF		0x102 /* 0x81 in 16-bit mode */
-
-static u32 hw_bits = 0xFFFFFFFD;    /* assume all hardware present */;
-static u8 control_value;
-
-/*
- * FIXME: this is reimplementing I2C bit-bangining. Move this
- * over to using driver/i2c/busses/i2c-gpio.c like all other boards
- * and register proper I2C device(s) on the bus for this. (See
- * other IXP4xx boards for examples.)
- */
-static void set_scl(u8 value)
-{
-	gpio_set_value(GPIO_SCL, !!value);
-	udelay(3);
-}
-
-static void set_sda(u8 value)
-{
-	gpio_set_value(GPIO_SDA, !!value);
-	udelay(3);
-}
-
-static void set_str(u8 value)
-{
-	gpio_set_value(GPIO_STR, !!value);
-	udelay(3);
-}
-
-static inline void set_control(int line, int value)
-{
-	if (value)
-		control_value |=  (1 << line);
-	else
-		control_value &= ~(1 << line);
-}
-
-
-static void output_control(void)
-{
-	int i;
-
-	gpio_direction_output(GPIO_SCL, 1);
-	gpio_direction_output(GPIO_SDA, 1);
-
-	for (i = 0; i < 8; i++) {
-		set_scl(0);
-		set_sda(control_value & (0x80 >> i)); /* MSB first */
-		set_scl(1);	/* active edge */
-	}
-
-	set_str(1);
-	set_str(0);
-
-	set_scl(0);
-	set_sda(1);		/* Be ready for START */
-	set_scl(1);
-}
-
-
-static void (*set_carrier_cb_tab[2])(void *pdev, int carrier);
-
-static int hss_set_clock(int port, unsigned int clock_type)
-{
-	int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT;
-
-	switch (clock_type) {
-	case CLOCK_DEFAULT:
-	case CLOCK_EXT:
-		set_control(ctrl_int, 0);
-		output_control();
-		return CLOCK_EXT;
-
-	case CLOCK_INT:
-		set_control(ctrl_int, 1);
-		output_control();
-		return CLOCK_INT;
-
-	default:
-		return -EINVAL;
-	}
-}
-
-static irqreturn_t hss_dcd_irq(int irq, void *pdev)
-{
-	int port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N));
-	int i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
-	set_carrier_cb_tab[port](pdev, !i);
-	return IRQ_HANDLED;
-}
-
-
-static int hss_open(int port, void *pdev,
-		    void (*set_carrier_cb)(void *pdev, int carrier))
-{
-	int i, irq;
-
-	if (!port)
-		irq = IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N);
-	else
-		irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N);
-
-	i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
-	set_carrier_cb(pdev, !i);
-
-	set_carrier_cb_tab[!!port] = set_carrier_cb;
-
-	if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) {
-		printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n",
-		       irq, i);
-		return i;
-	}
-
-	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
-	output_control();
-	gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
-	return 0;
-}
-
-static void hss_close(int port, void *pdev)
-{
-	free_irq(port ? IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N) :
-		 IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), pdev);
-	set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
-
-	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
-	output_control();
-	gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
-}
-
-
-/* Flash memory */
-static struct flash_platform_data flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device device_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= { .platform_data = &flash_data },
-	.num_resources	= 1,
-	.resource	= &flash_resource,
-};
-
-/* IXP425 2 UART ports */
-static struct resource uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct plat_serial8250_port uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char __iomem *)IXP4XX_UART1_BASE_VIRT +
-			REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char __iomem *)IXP4XX_UART2_BASE_VIRT +
-			REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device device_uarts = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= uart_data,
-	.num_resources		= 2,
-	.resource		= uart_resources,
-};
-
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct resource eth_npeb_resources[] = {
-	{
-		.start		= IXP4XX_EthB_BASE_PHYS,
-		.end		= IXP4XX_EthB_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource eth_npec_resources[] = {
-	{
-		.start		= IXP4XX_EthC_BASE_PHYS,
-		.end		= IXP4XX_EthC_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct eth_plat_info eth_plat[] = {
-	{
-		.phy		= 0,
-		.rxq		= 3,
-		.txreadyq	= 32,
-	}, {
-		.phy		= 1,
-		.rxq		= 4,
-		.txreadyq	= 33,
-	}
-};
-
-static struct platform_device device_eth_tab[] = {
-	{
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev.platform_data	= eth_plat,
-		.num_resources		= ARRAY_SIZE(eth_npeb_resources),
-		.resource		= eth_npeb_resources,
-	}, {
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEC,
-		.dev.platform_data	= eth_plat + 1,
-		.num_resources		= ARRAY_SIZE(eth_npec_resources),
-		.resource		= eth_npec_resources,
-	}
-};
-
-
-/* IXP425 2 synchronous serial ports */
-static struct hss_plat_info hss_plat[] = {
-	{
-		.set_clock	= hss_set_clock,
-		.open		= hss_open,
-		.close		= hss_close,
-		.txreadyq	= 34,
-	}, {
-		.set_clock	= hss_set_clock,
-		.open		= hss_open,
-		.close		= hss_close,
-		.txreadyq	= 35,
-	}
-};
-
-static struct platform_device device_hss_tab[] = {
-	{
-		.name			= "ixp4xx_hss",
-		.id			= 0,
-		.dev.platform_data	= hss_plat,
-	}, {
-		.name			= "ixp4xx_hss",
-		.id			= 1,
-		.dev.platform_data	= hss_plat + 1,
-	}
-};
-
-
-static struct platform_device *device_tab[7] __initdata = {
-	&device_flash,		/* index 0 */
-};
-
-static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr)
-{
-#ifdef __ARMEB__
-	return __raw_readb(flash + addr);
-#else
-	return __raw_readb(flash + (addr ^ 3));
-#endif
-}
-
-static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr)
-{
-#ifdef __ARMEB__
-	return __raw_readw(flash + addr);
-#else
-	return __raw_readw(flash + (addr ^ 2));
-#endif
-}
-
-static void __init gmlr_init(void)
-{
-	u8 __iomem *flash;
-	int i, devices = 1; /* flash */
-
-	ixp4xx_sys_init();
-
-	if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL)
-		printk(KERN_ERR "goramo-mlr: unable to access system"
-		       " configuration data\n");
-	else {
-		system_rev = __raw_readl(flash + CFG_REV);
-		hw_bits = __raw_readl(flash + CFG_HW_BITS);
-
-		for (i = 0; i < ETH_ALEN; i++) {
-			eth_plat[0].hwaddr[i] =
-				flash_readb(flash, CFG_ETH0_ADDRESS + i);
-			eth_plat[1].hwaddr[i] =
-				flash_readb(flash, CFG_ETH1_ADDRESS + i);
-		}
-
-		__raw_writew(FLASH_CMD_READ_ID, flash);
-		system_serial_high = flash_readw(flash, FLASH_SER_OFF);
-		system_serial_high <<= 16;
-		system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2);
-		system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4);
-		system_serial_low <<= 16;
-		system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6);
-		__raw_writew(FLASH_CMD_READ_ARRAY, flash);
-
-		iounmap(flash);
-	}
-
-	switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) {
-	case CFG_HW_HAS_UART0:
-		memset(&uart_data[1], 0, sizeof(uart_data[1]));
-		device_uarts.num_resources = 1;
-		break;
-
-	case CFG_HW_HAS_UART1:
-		device_uarts.dev.platform_data = &uart_data[1];
-		device_uarts.resource = &uart_resources[1];
-		device_uarts.num_resources = 1;
-		break;
-	}
-	if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1))
-		device_tab[devices++] = &device_uarts; /* max index 1 */
-
-	if (hw_bits & CFG_HW_HAS_ETH0)
-		device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */
-	if (hw_bits & CFG_HW_HAS_ETH1)
-		device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */
-
-	if (hw_bits & CFG_HW_HAS_HSS0)
-		device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */
-	if (hw_bits & CFG_HW_HAS_HSS1)
-		device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
-
-	hss_plat[0].timer_freq = ixp4xx_timer_freq;
-	hss_plat[1].timer_freq = ixp4xx_timer_freq;
-
-	gpio_request(GPIO_SCL, "SCL/clock");
-	gpio_request(GPIO_SDA, "SDA/data");
-	gpio_request(GPIO_STR, "strobe");
-	gpio_request(GPIO_HSS0_RTS_N, "HSS0 RTS");
-	gpio_request(GPIO_HSS1_RTS_N, "HSS1 RTS");
-	gpio_request(GPIO_HSS0_DCD_N, "HSS0 DCD");
-	gpio_request(GPIO_HSS1_DCD_N, "HSS1 DCD");
-
-	gpio_direction_output(GPIO_SCL, 1);
-	gpio_direction_output(GPIO_SDA, 1);
-	gpio_direction_output(GPIO_STR, 0);
-	gpio_direction_output(GPIO_HSS0_RTS_N, 1);
-	gpio_direction_output(GPIO_HSS1_RTS_N, 1);
-	gpio_direction_input(GPIO_HSS0_DCD_N);
-	gpio_direction_input(GPIO_HSS1_DCD_N);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
-
-	set_control(CONTROL_HSS0_DTR_N, 1);
-	set_control(CONTROL_HSS1_DTR_N, 1);
-	set_control(CONTROL_EEPROM_WC_N, 1);
-	set_control(CONTROL_PCI_RESET_N, 1);
-	output_control();
-
-	msleep(1);	      /* Wait for PCI devices to initialize */
-
-	flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-	platform_add_devices(device_tab, devices);
-}
-
-
-#ifdef CONFIG_PCI
-static void __init gmlr_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static void __init gmlr_pci_postinit(void)
-{
-	if ((hw_bits & CFG_HW_USB_PORTS) >= 2 &&
-	    (hw_bits & CFG_HW_USB_PORTS) < 5) {
-		/* need to adjust number of USB ports on NEC chip */
-		u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0;
-		if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
-			value &= ~7;
-			value |= (hw_bits & CFG_HW_USB_PORTS);
-			ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value);
-		}
-	}
-}
-
-static int __init gmlr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	switch(slot) {
-	case SLOT_ETHA:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA);
-	case SLOT_ETHB:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB);
-	case SLOT_NEC:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC);
-	default:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI);
-	}
-}
-
-static struct hw_pci gmlr_hw_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit	= gmlr_pci_preinit,
-	.postinit	= gmlr_pci_postinit,
-	.setup		= ixp4xx_setup,
-	.map_irq	= gmlr_map_irq,
-};
-
-static int __init gmlr_pci_init(void)
-{
-	if (machine_is_goramo_mlr() &&
-	    (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT)))
-		pci_common_init(&gmlr_hw_pci);
-	return 0;
-}
-
-subsys_initcall(gmlr_pci_init);
-#endif /* CONFIG_PCI */
-
-
-MACHINE_START(GORAMO_MLR, "MultiLink")
-	/* Maintainer: Krzysztof Halasa */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= gmlr_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
deleted file mode 100644
index 224328dbddb1..000000000000
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ixp4xx/gtwx5715-pci.c
- *
- * Gemtek GTWX5715 (Linksys WRV54G) board setup
- *
- * Copyright (C) 2004 George T. Joseph
- * Derived from Coyote
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/mach/pci.h>
-
-#include "irqs.h"
-
-#define SLOT0_DEVID	0
-#define SLOT1_DEVID	1
-#define INTA		10 /* slot 1 has INTA and INTB crossed */
-#define INTB		11
-
-/*
- * Slot 0 isn't actually populated with a card connector but
- * we initialize it anyway in case a future version has the
- * slot populated or someone with good soldering skills has
- * some free time.
- */
-void __init gtwx5715_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-
-static int __init gtwx5715_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int rc = -1;
-
-	if ((slot == SLOT0_DEVID && pin == 1) ||
-	    (slot == SLOT1_DEVID && pin == 2))
-		rc = IXP4XX_GPIO_IRQ(INTA);
-	else if ((slot == SLOT0_DEVID && pin == 2) ||
-		 (slot == SLOT1_DEVID && pin == 1))
-		rc = IXP4XX_GPIO_IRQ(INTB);
-
-	printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n",
-	       __func__, slot, pin, rc);
-	return rc;
-}
-
-struct hw_pci gtwx5715_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit =        gtwx5715_pci_preinit,
-	.setup =          ixp4xx_setup,
-	.map_irq =        gtwx5715_map_irq,
-};
-
-int __init gtwx5715_pci_init(void)
-{
-	if (machine_is_gtwx5715())
-		pci_common_init(&gtwx5715_pci);
-
-	return 0;
-}
-
-subsys_initcall(gtwx5715_pci_init);
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
deleted file mode 100644
index 28f0d2a8a829..000000000000
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ /dev/null
@@ -1,167 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ixp4xx/gtwx5715-setup.c
- *
- * Gemtek GTWX5715 (Linksys WRV54G) board setup
- *
- * Copyright (C) 2004 George T. Joseph
- * Derived from Coyote
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-/* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch
-   and operate as an SPI type interface.  The details of the interface
-   are available on Kendin/Micrel's web site. */
-
-#define GTWX5715_KSSPI_SELECT	5
-#define GTWX5715_KSSPI_TXD	6
-#define GTWX5715_KSSPI_CLOCK	7
-#define GTWX5715_KSSPI_RXD	12
-
-/* The "reset" button is wired to GPIO 3.
-   The GPIO is brought "low" when the button is pushed. */
-
-#define GTWX5715_BUTTON_GPIO	3
-
-/* Board Label      Front Label
-   LED1             Power
-   LED2             Wireless-G
-   LED3             not populated but could be
-   LED4             Internet
-   LED5 - LED8      Controlled by KS8995M Switch
-   LED9             DMZ */
-
-#define GTWX5715_LED1_GPIO	2
-#define GTWX5715_LED2_GPIO	9
-#define GTWX5715_LED3_GPIO	8
-#define GTWX5715_LED4_GPIO	1
-#define GTWX5715_LED9_GPIO	4
-
-/*
- * Xscale UART registers are 32 bits wide with only the least
- * significant 8 bits having any meaning.  From a configuration
- * perspective, this means 2 things...
- *
- *   Setting .regshift = 2 so that the standard 16550 registers
- *   line up on every 4th byte.
- *
- *   Shifting the register start virtual address +3 bytes when
- *   compiled big-endian.  Since register writes are done on a
- *   single byte basis, if the shift isn't done the driver will
- *   write the value into the most significant byte of the register,
- *   which is ignored, instead of the least significant.
- */
-
-#ifdef	__ARMEB__
-#define	REG_OFFSET	3
-#else
-#define	REG_OFFSET	0
-#endif
-
-/*
- * Only the second or "console" uart is connected on the gtwx5715.
- */
-
-static struct resource gtwx5715_uart_resources[] = {
-	{
-		.start	= IXP4XX_UART2_BASE_PHYS,
-		.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_IXP4XX_UART2,
-		.end	= IRQ_IXP4XX_UART2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{ },
-};
-
-
-static struct plat_serial8250_port gtwx5715_uart_platform_data[] = {
-	{
-	.mapbase	= IXP4XX_UART2_BASE_PHYS,
-	.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-	.irq		= IRQ_IXP4XX_UART2,
-	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	.iotype		= UPIO_MEM,
-	.regshift	= 2,
-	.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device gtwx5715_uart_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= gtwx5715_uart_platform_data,
-	},
-	.num_resources	= 2,
-	.resource	= gtwx5715_uart_resources,
-};
-
-static struct flash_platform_data gtwx5715_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource gtwx5715_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device gtwx5715_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &gtwx5715_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &gtwx5715_flash_resource,
-};
-
-static struct platform_device *gtwx5715_devices[] __initdata = {
-	&gtwx5715_uart_device,
-	&gtwx5715_flash,
-};
-
-static void __init gtwx5715_init(void)
-{
-	ixp4xx_sys_init();
-
-	gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
-
-	platform_add_devices(gtwx5715_devices, ARRAY_SIZE(gtwx5715_devices));
-}
-
-
-MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
-	/* Maintainer: George Joseph */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= gtwx5715_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
deleted file mode 100644
index b872a5354ddd..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/cpu.h
- *
- * IXP4XX cpu type detection
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_CPU_H__
-#define __ASM_ARCH_CPU_H__
-
-#include <linux/io.h>
-#include <asm/cputype.h>
-
-/* Processor id value in CP15 Register 0 */
-#define IXP42X_PROCESSOR_ID_VALUE	0x690541c0 /* including unused 0x690541Ex */
-#define IXP42X_PROCESSOR_ID_MASK	0xffffffc0
-
-#define IXP43X_PROCESSOR_ID_VALUE	0x69054040
-#define IXP43X_PROCESSOR_ID_MASK	0xfffffff0
-
-#define IXP46X_PROCESSOR_ID_VALUE	0x69054200 /* including IXP455 */
-#define IXP46X_PROCESSOR_ID_MASK	0xfffffff0
-
-#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \
-				IXP42X_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp42x()	((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
-			 IXP42X_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp43x()	((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
-			 IXP43X_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp46x()	((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \
-			 IXP46X_PROCESSOR_ID_VALUE)
-
-static inline u32 ixp4xx_read_feature_bits(void)
-{
-	u32 val = ~__raw_readl(IXP4XX_EXP_CFG2);
-
-	if (cpu_is_ixp42x_rev_a0())
-		return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
-					       IXP4XX_FEATURE_AES);
-	if (cpu_is_ixp42x())
-		return val & IXP42X_FEATURE_MASK;
-	if (cpu_is_ixp43x())
-		return val & IXP43X_FEATURE_MASK;
-	return val & IXP46X_FEATURE_MASK;
-}
-
-static inline void ixp4xx_write_feature_bits(u32 value)
-{
-	__raw_writel(~value, IXP4XX_EXP_CFG2);
-}
-
-#endif  /* _ASM_ARCH_CPU_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
deleted file mode 100644
index b884eedcd0fc..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/hardware.h 
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-/*
- * Hardware definitions for IXP4xx based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-#define PCIBIOS_MAX_MEM		0x4FFFFFFF
-#else
-#define PCIBIOS_MAX_MEM		0x4BFFFFFF
-#endif
-
-/* Register locations and bits */
-#include "ixp4xx-regs.h"
-
-#ifndef __ASSEMBLER__
-#include <mach/cpu.h>
-#endif
-
-/* Platform helper functions and definitions */
-#include "platform.h"
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
deleted file mode 100644
index 014cf6dcaf8b..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ /dev/null
@@ -1,545 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/io.h
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2005  MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <linux/bitops.h>
-
-#include <mach/hardware.h>
-
-extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
-extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
-
-
-/*
- * IXP4xx provides two methods of accessing PCI memory space:
- *
- * 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
- *    To access PCI via this space, we simply ioremap() the BAR
- *    into the kernel and we can use the standard read[bwl]/write[bwl]
- *    macros. This is the preffered method due to speed but it
- *    limits the system to just 64MB of PCI memory. This can be
- *    problematic if using video cards and other memory-heavy targets.
- *
- * 2) If > 64MB of memory space is required, the IXP4xx can use indirect
- *    registers to access the whole 4 GB of PCI memory space (as we do below
- *    for I/O transactions). This allows currently for up to 1 GB (0x10000000
- *    to 0x4FFFFFFF) of memory on the bus. The disadvantage of this is that
- *    every PCI access requires three local register accesses plus a spinlock,
- *    but in some cases the performance hit is acceptable. In addition, you
- *    cannot mmap() PCI devices in this case.
- */
-#ifdef	CONFIG_IXP4XX_INDIRECT_PCI
-
-/*
- * In the case of using indirect PCI, we simply return the actual PCI
- * address and our read/write implementation use that to drive the 
- * access registers. If something outside of PCI is ioremap'd, we
- * fallback to the default.
- */
-
-extern unsigned long pcibios_min_mem;
-static inline int is_pci_memory(u32 addr)
-{
-	return (addr >= pcibios_min_mem) && (addr <= 0x4FFFFFFF);
-}
-
-#define writeb(v, p)			__indirect_writeb(v, p)
-#define writew(v, p)			__indirect_writew(v, p)
-#define writel(v, p)			__indirect_writel(v, p)
-
-#define writeb_relaxed(v, p)		__indirect_writeb(v, p)
-#define writew_relaxed(v, p)		__indirect_writew(v, p)
-#define writel_relaxed(v, p)		__indirect_writel(v, p)
-
-#define writesb(p, v, l)		__indirect_writesb(p, v, l)
-#define writesw(p, v, l)		__indirect_writesw(p, v, l)
-#define writesl(p, v, l)		__indirect_writesl(p, v, l)
-
-#define readb(p)			__indirect_readb(p)
-#define readw(p)			__indirect_readw(p)
-#define readl(p)			__indirect_readl(p)
-
-#define readb_relaxed(p)		__indirect_readb(p)
-#define readw_relaxed(p)		__indirect_readw(p)
-#define readl_relaxed(p)		__indirect_readl(p)
-
-#define readsb(p, v, l)			__indirect_readsb(p, v, l)
-#define readsw(p, v, l)			__indirect_readsw(p, v, l)
-#define readsl(p, v, l)			__indirect_readsl(p, v, l)
-
-static inline void __indirect_writeb(u8 value, volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (!is_pci_memory(addr)) {
-		__raw_writeb(value, p);
-		return;
-	}
-
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void __indirect_writesb(volatile void __iomem *bus_addr,
-				      const void *p, int count)
-{
-	const u8 *vaddr = p;
-
-	while (count--)
-		writeb(*vaddr++, bus_addr);
-}
-
-static inline void __indirect_writew(u16 value, volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (!is_pci_memory(addr)) {
-		__raw_writew(value, p);
-		return;
-	}
-
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void __indirect_writesw(volatile void __iomem *bus_addr,
-				      const void *p, int count)
-{
-	const u16 *vaddr = p;
-
-	while (count--)
-		writew(*vaddr++, bus_addr);
-}
-
-static inline void __indirect_writel(u32 value, volatile void __iomem *p)
-{
-	u32 addr = (__force u32)p;
-
-	if (!is_pci_memory(addr)) {
-		__raw_writel(value, p);
-		return;
-	}
-
-	ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
-}
-
-static inline void __indirect_writesl(volatile void __iomem *bus_addr,
-				      const void *p, int count)
-{
-	const u32 *vaddr = p;
-	while (count--)
-		writel(*vaddr++, bus_addr);
-}
-
-static inline u8 __indirect_readb(const volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (!is_pci_memory(addr))
-		return __raw_readb(p);
-
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
-		return 0xff;
-
-	return data >> (8*n);
-}
-
-static inline void __indirect_readsb(const volatile void __iomem *bus_addr,
-				     void *p, u32 count)
-{
-	u8 *vaddr = p;
-
-	while (count--)
-		*vaddr++ = readb(bus_addr);
-}
-
-static inline u16 __indirect_readw(const volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (!is_pci_memory(addr))
-		return __raw_readw(p);
-
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
-		return 0xffff;
-
-	return data>>(8*n);
-}
-
-static inline void __indirect_readsw(const volatile void __iomem *bus_addr,
-				     void *p, u32 count)
-{
-	u16 *vaddr = p;
-
-	while (count--)
-		*vaddr++ = readw(bus_addr);
-}
-
-static inline u32 __indirect_readl(const volatile void __iomem *p)
-{
-	u32 addr = (__force u32)p;
-	u32 data;
-
-	if (!is_pci_memory(addr))
-		return __raw_readl(p);
-
-	if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
-		return 0xffffffff;
-
-	return data;
-}
-
-static inline void __indirect_readsl(const volatile void __iomem *bus_addr,
-				     void *p, u32 count)
-{
-	u32 *vaddr = p;
-
-	while (count--)
-		*vaddr++ = readl(bus_addr);
-}
-
-
-/*
- * We can use the built-in functions b/c they end up calling writeb/readb
- */
-#define memset_io(c,v,l)		_memset_io((c),(v),(l))
-#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),(c),(l))
-#define memcpy_toio(c,a,l)		_memcpy_toio((c),(a),(l))
-
-#endif /* CONFIG_IXP4XX_INDIRECT_PCI */
-
-#ifndef CONFIG_PCI
-
-#define	__io(v)		__typesafe_io(v)
-
-#else
-
-/*
- * IXP4xx does not have a transparent cpu -> PCI I/O translation
- * window.  Instead, it has a set of registers that must be tweaked
- * with the proper byte lanes, command types, and address for the
- * transaction.  This means that we need to override the default
- * I/O functions.
- */
-
-#define outb outb
-static inline void outb(u8 value, u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-#define outsb outsb
-static inline void outsb(u32 io_addr, const void *p, u32 count)
-{
-	const u8 *vaddr = p;
-
-	while (count--)
-		outb(*vaddr++, io_addr);
-}
-
-#define outw outw
-static inline void outw(u16 value, u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-#define outsw outsw
-static inline void outsw(u32 io_addr, const void *p, u32 count)
-{
-	const u16 *vaddr = p;
-	while (count--)
-		outw(cpu_to_le16(*vaddr++), io_addr);
-}
-
-#define outl outl
-static inline void outl(u32 value, u32 addr)
-{
-	ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
-}
-
-#define outsl outsl
-static inline void outsl(u32 io_addr, const void *p, u32 count)
-{
-	const u32 *vaddr = p;
-	while (count--)
-		outl(cpu_to_le32(*vaddr++), io_addr);
-}
-
-#define inb inb
-static inline u8 inb(u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
-		return 0xff;
-
-	return data >> (8*n);
-}
-
-#define insb insb
-static inline void insb(u32 io_addr, void *p, u32 count)
-{
-	u8 *vaddr = p;
-	while (count--)
-		*vaddr++ = inb(io_addr);
-}
-
-#define inw inw
-static inline u16 inw(u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
-		return 0xffff;
-
-	return data>>(8*n);
-}
-
-#define insw insw
-static inline void insw(u32 io_addr, void *p, u32 count)
-{
-	u16 *vaddr = p;
-	while (count--)
-		*vaddr++ = le16_to_cpu(inw(io_addr));
-}
-
-#define inl inl
-static inline u32 inl(u32 addr)
-{
-	u32 data;
-	if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
-		return 0xffffffff;
-
-	return data;
-}
-
-#define insl insl
-static inline void insl(u32 io_addr, void *p, u32 count)
-{
-	u32 *vaddr = p;
-	while (count--)
-		*vaddr++ = le32_to_cpu(inl(io_addr));
-}
-
-#define PIO_OFFSET      0x10000UL
-#define PIO_MASK        0x0ffffUL
-
-#define	__is_io_address(p)	(((unsigned long)p >= PIO_OFFSET) && \
-					((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
-
-#define	ioread8(p)			ioread8(p)
-static inline u8 ioread8(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return (unsigned int)inb(port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return (unsigned int)__raw_readb(addr);
-#else
-		return (unsigned int)__indirect_readb(addr);
-#endif
-}
-
-#define	ioread8_rep(p, v, c)		ioread8_rep(p, v, c)
-static inline void ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		insb(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsb(addr, vaddr, count);
-#else
-		__indirect_readsb(addr, vaddr, count);
-#endif
-}
-
-#define	ioread16(p)			ioread16(p)
-static inline u16 ioread16(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)inw(port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return le16_to_cpu((__force __le16)__raw_readw(addr));
-#else
-		return (unsigned int)__indirect_readw(addr);
-#endif
-}
-
-#define	ioread16_rep(p, v, c)		ioread16_rep(p, v, c)
-static inline void ioread16_rep(const void __iomem *addr, void *vaddr,
-				u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		insw(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsw(addr, vaddr, count);
-#else
-		__indirect_readsw(addr, vaddr, count);
-#endif
-}
-
-#define	ioread32(p)			ioread32(p)
-static inline u32 ioread32(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)inl(port & PIO_MASK);
-	else {
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return le32_to_cpu((__force __le32)__raw_readl(addr));
-#else
-		return (unsigned int)__indirect_readl(addr);
-#endif
-	}
-}
-
-#define	ioread32_rep(p, v, c)		ioread32_rep(p, v, c)
-static inline void ioread32_rep(const void __iomem *addr, void *vaddr,
-				u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		insl(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsl(addr, vaddr, count);
-#else
-		__indirect_readsl(addr, vaddr, count);
-#endif
-}
-
-#define	iowrite8(v, p)			iowrite8(v, p)
-static inline void iowrite8(u8 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outb(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writeb(value, addr);
-#else
-		__indirect_writeb(value, addr);
-#endif
-}
-
-#define	iowrite8_rep(p, v, c)		iowrite8_rep(p, v, c)
-static inline void iowrite8_rep(void __iomem *addr, const void *vaddr,
-				u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outsb(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesb(addr, vaddr, count);
-#else
-		__indirect_writesb(addr, vaddr, count);
-#endif
-}
-
-#define	iowrite16(v, p)			iowrite16(v, p)
-static inline void iowrite16(u16 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outw(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writew(cpu_to_le16(value), addr);
-#else
-		__indirect_writew(value, addr);
-#endif
-}
-
-#define	iowrite16_rep(p, v, c)		iowrite16_rep(p, v, c)
-static inline void iowrite16_rep(void __iomem *addr, const void *vaddr,
-				 u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outsw(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesw(addr, vaddr, count);
-#else
-		__indirect_writesw(addr, vaddr, count);
-#endif
-}
-
-#define	iowrite32(v, p)			iowrite32(v, p)
-static inline void iowrite32(u32 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outl(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writel((u32 __force)cpu_to_le32(value), addr);
-#else
-		__indirect_writel(value, addr);
-#endif
-}
-
-#define	iowrite32_rep(p, v, c)		iowrite32_rep(p, v, c)
-static inline void iowrite32_rep(void __iomem *addr, const void *vaddr,
-				 u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outsl(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesl(addr, vaddr, count);
-#else
-		__indirect_writesl(addr, vaddr, count);
-#endif
-}
-
-#define ioport_map(port, nr) ioport_map(port, nr)
-static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
-	return ((void __iomem*)((port) + PIO_OFFSET));
-}
-#define	ioport_unmap(addr) ioport_unmap(addr)
-static inline void ioport_unmap(void __iomem *addr)
-{
-}
-#endif /* CONFIG_PCI */
-
-#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
deleted file mode 100644
index 708d085ce39f..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ /dev/null
@@ -1,356 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
- *
- * Register definitions for IXP4xx chipset. This file contains 
- * register location and bit definitions only. Platform specific 
- * definitions and helper function declarations are in platform.h 
- * and machine-name.h.
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#ifndef _ASM_ARM_IXP4XX_H_
-#define _ASM_ARM_IXP4XX_H_
-
-/*
- * IXP4xx Linux Memory Map:
- *
- * Phy		Size		Virt		Description
- * =========================================================================
- *
- * 0x00000000	0x10000000(max)	PAGE_OFFSET	System RAM
- *
- * 0x48000000	0x04000000	ioremap'd	PCI Memory Space
- *
- * 0x50000000	0x10000000	ioremap'd	EXP BUS
- *
- * 0xC8000000	0x00013000	0xFEF00000	On-Chip Peripherals
- *
- * 0xC0000000	0x00001000	0xFEF13000	PCI CFG
- *
- * 0xC4000000	0x00001000	0xFEF14000	EXP CFG
- *
- * 0x60000000	0x00004000	0xFEF15000	QMgr
- */
-
-/*
- * Queue Manager
- */
-#define IXP4XX_QMGR_BASE_PHYS		0x60000000
-
-/*
- * Peripheral space, including debug UART. Must be section-aligned so that
- * it can be used with the low-level debug code.
- */
-#define IXP4XX_PERIPHERAL_BASE_PHYS	0xC8000000
-#define IXP4XX_PERIPHERAL_BASE_VIRT	IOMEM(0xFEF00000)
-#define IXP4XX_PERIPHERAL_REGION_SIZE	0x00013000
-
-/*
- * PCI Config registers
- */
-#define IXP4XX_PCI_CFG_BASE_PHYS	0xC0000000
-#define IXP4XX_PCI_CFG_BASE_VIRT	IOMEM(0xFEF13000)
-#define IXP4XX_PCI_CFG_REGION_SIZE	0x00001000
-
-/*
- * Expansion BUS Configuration registers
- */
-#define IXP4XX_EXP_CFG_BASE_PHYS	0xC4000000
-#define IXP4XX_EXP_CFG_BASE_VIRT	0xFEF14000
-#define IXP4XX_EXP_CFG_REGION_SIZE	0x00001000
-
-#define IXP4XX_EXP_CS0_OFFSET	0x00
-#define IXP4XX_EXP_CS1_OFFSET   0x04
-#define IXP4XX_EXP_CS2_OFFSET   0x08
-#define IXP4XX_EXP_CS3_OFFSET   0x0C
-#define IXP4XX_EXP_CS4_OFFSET   0x10
-#define IXP4XX_EXP_CS5_OFFSET   0x14
-#define IXP4XX_EXP_CS6_OFFSET   0x18
-#define IXP4XX_EXP_CS7_OFFSET   0x1C
-#define IXP4XX_EXP_CFG0_OFFSET	0x20
-#define IXP4XX_EXP_CFG1_OFFSET	0x24
-#define IXP4XX_EXP_CFG2_OFFSET	0x28
-#define IXP4XX_EXP_CFG3_OFFSET	0x2C
-
-/*
- * Expansion Bus Controller registers.
- */
-#define IXP4XX_EXP_REG(x) ((volatile u32 __iomem *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
-
-#define IXP4XX_EXP_CS0      IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
-#define IXP4XX_EXP_CS1      IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
-#define IXP4XX_EXP_CS2      IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET) 
-#define IXP4XX_EXP_CS3      IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET)
-#define IXP4XX_EXP_CS4      IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET)
-#define IXP4XX_EXP_CS5      IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET)
-#define IXP4XX_EXP_CS6      IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET)     
-#define IXP4XX_EXP_CS7      IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET)
-
-#define IXP4XX_EXP_CFG0     IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET) 
-#define IXP4XX_EXP_CFG1     IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET) 
-#define IXP4XX_EXP_CFG2     IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET) 
-#define IXP4XX_EXP_CFG3     IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET)
-
-
-/*
- * Peripheral Space Register Region Base Addresses
- */
-#define IXP4XX_UART1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
-#define IXP4XX_UART2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
-#define IXP4XX_PMU_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
-#define IXP4XX_INTC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
-#define IXP4XX_GPIO_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
-#define IXP4XX_TIMER_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
-#define IXP4XX_NPEA_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
-#define IXP4XX_NPEB_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
-#define IXP4XX_NPEC_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
-#define IXP4XX_EthB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
-#define IXP4XX_EthC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
-#define IXP4XX_USB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000)
-#define IXP4XX_EthB1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000)
-#define IXP4XX_EthB2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000)
-#define IXP4XX_EthB3_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000)
-#define IXP4XX_I2C_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000)
-#define IXP4XX_SSP_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
-
-
-#define IXP4XX_UART1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
-#define IXP4XX_UART2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
-#define IXP4XX_PMU_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
-#define IXP4XX_INTC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
-#define IXP4XX_GPIO_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
-#define IXP4XX_TIMER_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
-#define IXP4XX_EthB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
-#define IXP4XX_EthC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
-#define IXP4XX_USB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000)
-#define IXP4XX_EthB1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000)
-#define IXP4XX_EthB2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000)
-#define IXP4XX_EthB3_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000)
-#define IXP4XX_I2C_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
-#define IXP4XX_SSP_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
-
-/*
- * Constants to make it easy to access Timer Control/Status registers
- */
-#define IXP4XX_OSTS_OFFSET	0x00  /* Continious TimeStamp */
-#define IXP4XX_OST1_OFFSET	0x04  /* Timer 1 Timestamp */
-#define IXP4XX_OSRT1_OFFSET	0x08  /* Timer 1 Reload */
-#define IXP4XX_OST2_OFFSET	0x0C  /* Timer 2 Timestamp */
-#define IXP4XX_OSRT2_OFFSET	0x10  /* Timer 2 Reload */
-#define IXP4XX_OSWT_OFFSET	0x14  /* Watchdog Timer */
-#define IXP4XX_OSWE_OFFSET	0x18  /* Watchdog Enable */
-#define IXP4XX_OSWK_OFFSET	0x1C  /* Watchdog Key */
-#define IXP4XX_OSST_OFFSET	0x20  /* Timer Status */
-
-/*
- * Operating System Timer Register Definitions.
- */
-
-#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x)))
-
-#define IXP4XX_OSTS	IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET)
-#define IXP4XX_OST1	IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET)
-#define IXP4XX_OSRT1	IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET)
-#define IXP4XX_OST2	IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET)
-#define IXP4XX_OSRT2	IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET)
-#define IXP4XX_OSWT	IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET)
-#define IXP4XX_OSWE	IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET)
-#define IXP4XX_OSWK	IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET)
-#define IXP4XX_OSST	IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET)
-
-/*
- * Timer register values and bit definitions 
- */
-#define IXP4XX_OST_ENABLE		0x00000001
-#define IXP4XX_OST_ONE_SHOT		0x00000002
-/* Low order bits of reload value ignored */
-#define IXP4XX_OST_RELOAD_MASK		0x00000003
-#define IXP4XX_OST_DISABLED		0x00000000
-#define IXP4XX_OSST_TIMER_1_PEND	0x00000001
-#define IXP4XX_OSST_TIMER_2_PEND	0x00000002
-#define IXP4XX_OSST_TIMER_TS_PEND	0x00000004
-#define IXP4XX_OSST_TIMER_WDOG_PEND	0x00000008
-#define IXP4XX_OSST_TIMER_WARM_RESET	0x00000010
-
-#define	IXP4XX_WDT_KEY			0x0000482E
-
-#define	IXP4XX_WDT_RESET_ENABLE		0x00000001
-#define	IXP4XX_WDT_IRQ_ENABLE		0x00000002
-#define	IXP4XX_WDT_COUNT_ENABLE		0x00000004
-
-
-/*
- * Constants to make it easy to access PCI Control/Status registers
- */
-#define PCI_NP_AD_OFFSET            0x00
-#define PCI_NP_CBE_OFFSET           0x04
-#define PCI_NP_WDATA_OFFSET         0x08
-#define PCI_NP_RDATA_OFFSET         0x0c
-#define PCI_CRP_AD_CBE_OFFSET       0x10
-#define PCI_CRP_WDATA_OFFSET        0x14
-#define PCI_CRP_RDATA_OFFSET        0x18
-#define PCI_CSR_OFFSET              0x1c
-#define PCI_ISR_OFFSET              0x20
-#define PCI_INTEN_OFFSET            0x24
-#define PCI_DMACTRL_OFFSET          0x28
-#define PCI_AHBMEMBASE_OFFSET       0x2c
-#define PCI_AHBIOBASE_OFFSET        0x30
-#define PCI_PCIMEMBASE_OFFSET       0x34
-#define PCI_AHBDOORBELL_OFFSET      0x38
-#define PCI_PCIDOORBELL_OFFSET      0x3C
-#define PCI_ATPDMA0_AHBADDR_OFFSET  0x40
-#define PCI_ATPDMA0_PCIADDR_OFFSET  0x44
-#define PCI_ATPDMA0_LENADDR_OFFSET  0x48
-#define PCI_ATPDMA1_AHBADDR_OFFSET  0x4C
-#define PCI_ATPDMA1_PCIADDR_OFFSET  0x50
-#define PCI_ATPDMA1_LENADDR_OFFSET	0x54
-
-/*
- * PCI Control/Status Registers
- */
-#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
-
-#define PCI_NP_AD               IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
-#define PCI_NP_CBE              IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
-#define PCI_NP_WDATA            IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
-#define PCI_NP_RDATA            IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
-#define PCI_CRP_AD_CBE          IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
-#define PCI_CRP_WDATA           IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
-#define PCI_CRP_RDATA           IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
-#define PCI_CSR                 IXP4XX_PCI_CSR(PCI_CSR_OFFSET) 
-#define PCI_ISR                 IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
-#define PCI_INTEN               IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
-#define PCI_DMACTRL             IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
-#define PCI_AHBMEMBASE          IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
-#define PCI_AHBIOBASE           IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
-#define PCI_PCIMEMBASE          IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
-#define PCI_AHBDOORBELL         IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
-#define PCI_PCIDOORBELL         IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
-#define PCI_ATPDMA0_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
-#define PCI_ATPDMA0_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
-#define PCI_ATPDMA0_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
-#define PCI_ATPDMA1_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
-#define PCI_ATPDMA1_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
-#define PCI_ATPDMA1_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
-
-/*
- * PCI register values and bit definitions 
- */
-
-/* CSR bit definitions */
-#define PCI_CSR_HOST    	0x00000001
-#define PCI_CSR_ARBEN   	0x00000002
-#define PCI_CSR_ADS     	0x00000004
-#define PCI_CSR_PDS     	0x00000008
-#define PCI_CSR_ABE     	0x00000010
-#define PCI_CSR_DBT     	0x00000020
-#define PCI_CSR_ASE     	0x00000100
-#define PCI_CSR_IC      	0x00008000
-
-/* ISR (Interrupt status) Register bit definitions */
-#define PCI_ISR_PSE     	0x00000001
-#define PCI_ISR_PFE     	0x00000002
-#define PCI_ISR_PPE     	0x00000004
-#define PCI_ISR_AHBE    	0x00000008
-#define PCI_ISR_APDC    	0x00000010
-#define PCI_ISR_PADC    	0x00000020
-#define PCI_ISR_ADB     	0x00000040
-#define PCI_ISR_PDB     	0x00000080
-
-/* INTEN (Interrupt Enable) Register bit definitions */
-#define PCI_INTEN_PSE   	0x00000001
-#define PCI_INTEN_PFE   	0x00000002
-#define PCI_INTEN_PPE   	0x00000004
-#define PCI_INTEN_AHBE  	0x00000008
-#define PCI_INTEN_APDC  	0x00000010
-#define PCI_INTEN_PADC  	0x00000020
-#define PCI_INTEN_ADB   	0x00000040
-#define PCI_INTEN_PDB   	0x00000080
-
-/*
- * Shift value for byte enable on NP cmd/byte enable register
- */
-#define IXP4XX_PCI_NP_CBE_BESL		4
-
-/*
- * PCI commands supported by NP access unit
- */
-#define NP_CMD_IOREAD			0x2
-#define NP_CMD_IOWRITE			0x3
-#define NP_CMD_CONFIGREAD		0xa
-#define NP_CMD_CONFIGWRITE		0xb
-#define NP_CMD_MEMREAD			0x6
-#define	NP_CMD_MEMWRITE			0x7
-
-/*
- * Constants for CRP access into local config space
- */
-#define CRP_AD_CBE_BESL         20
-#define CRP_AD_CBE_WRITE	0x00010000
-
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
-/* "fuse" bits of IXP_EXP_CFG2 */
-/* All IXP4xx CPUs */
-#define IXP4XX_FEATURE_RCOMP		(1 << 0)
-#define IXP4XX_FEATURE_USB_DEVICE	(1 << 1)
-#define IXP4XX_FEATURE_HASH		(1 << 2)
-#define IXP4XX_FEATURE_AES		(1 << 3)
-#define IXP4XX_FEATURE_DES		(1 << 4)
-#define IXP4XX_FEATURE_HDLC		(1 << 5)
-#define IXP4XX_FEATURE_AAL		(1 << 6)
-#define IXP4XX_FEATURE_HSS		(1 << 7)
-#define IXP4XX_FEATURE_UTOPIA		(1 << 8)
-#define IXP4XX_FEATURE_NPEB_ETH0	(1 << 9)
-#define IXP4XX_FEATURE_NPEC_ETH		(1 << 10)
-#define IXP4XX_FEATURE_RESET_NPEA	(1 << 11)
-#define IXP4XX_FEATURE_RESET_NPEB	(1 << 12)
-#define IXP4XX_FEATURE_RESET_NPEC	(1 << 13)
-#define IXP4XX_FEATURE_PCI		(1 << 14)
-#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT	(3 << 16)
-#define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
-#define IXP42X_FEATURE_MASK		(IXP4XX_FEATURE_RCOMP            | \
-					 IXP4XX_FEATURE_USB_DEVICE       | \
-					 IXP4XX_FEATURE_HASH             | \
-					 IXP4XX_FEATURE_AES              | \
-					 IXP4XX_FEATURE_DES              | \
-					 IXP4XX_FEATURE_HDLC             | \
-					 IXP4XX_FEATURE_AAL              | \
-					 IXP4XX_FEATURE_HSS              | \
-					 IXP4XX_FEATURE_UTOPIA           | \
-					 IXP4XX_FEATURE_NPEB_ETH0        | \
-					 IXP4XX_FEATURE_NPEC_ETH         | \
-					 IXP4XX_FEATURE_RESET_NPEA       | \
-					 IXP4XX_FEATURE_RESET_NPEB       | \
-					 IXP4XX_FEATURE_RESET_NPEC       | \
-					 IXP4XX_FEATURE_PCI              | \
-					 IXP4XX_FEATURE_UTOPIA_PHY_LIMIT | \
-					 IXP4XX_FEATURE_XSCALE_MAX_FREQ)
-
-
-/* IXP43x/46x CPUs */
-#define IXP4XX_FEATURE_ECC_TIMESYNC	(1 << 15)
-#define IXP4XX_FEATURE_USB_HOST		(1 << 18)
-#define IXP4XX_FEATURE_NPEA_ETH		(1 << 19)
-#define IXP43X_FEATURE_MASK		(IXP42X_FEATURE_MASK             | \
-					 IXP4XX_FEATURE_ECC_TIMESYNC     | \
-					 IXP4XX_FEATURE_USB_HOST         | \
-					 IXP4XX_FEATURE_NPEA_ETH)
-
-/* IXP46x CPU (including IXP455) only */
-#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3	(1 << 20)
-#define IXP4XX_FEATURE_RSA		(1 << 21)
-#define IXP46X_FEATURE_MASK		(IXP43X_FEATURE_MASK             | \
-					 IXP4XX_FEATURE_NPEB_ETH_1_TO_3  | \
-					 IXP4XX_FEATURE_RSA)
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
deleted file mode 100644
index 6d403fe0bf52..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ixp4xx/include/mach/platform.h
- *
- * Constants and functions that are useful to IXP4xx platform-specific code
- * and device drivers.
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <linux/reboot.h>
-#include <linux/platform_data/eth_ixp4xx.h>
-
-#include <asm/types.h>
-
-#ifndef	__ARMEB__
-#define	REG_OFFSET	0
-#else
-#define	REG_OFFSET	3
-#endif
-
-/*
- * Expansion bus memory regions
- */
-#define IXP4XX_EXP_BUS_BASE_PHYS	(0x50000000)
-
-/*
- * The expansion bus on the IXP4xx can be configured for either 16 or
- * 32MB windows and the CS offset for each region changes based on the
- * current configuration. This means that we cannot simply hardcode
- * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
- * as setup by the bootloader to determine our window size.
- */
-extern unsigned long ixp4xx_exp_bus_size;
-
-#define	IXP4XX_EXP_BUS_BASE(region)\
-		(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
-
-#define IXP4XX_EXP_BUS_END(region)\
-		(IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
-
-/* Those macros can be used to adjust timing and configure
- * other features for each region.
- */
-
-#define IXP4XX_EXP_BUS_RECOVERY_T(x)	(((x) & 0x0f) << 16)
-#define IXP4XX_EXP_BUS_HOLD_T(x)	(((x) & 0x03) << 20)
-#define IXP4XX_EXP_BUS_STROBE_T(x)	(((x) & 0x0f) << 22)
-#define IXP4XX_EXP_BUS_SETUP_T(x)	(((x) & 0x03) << 26)
-#define IXP4XX_EXP_BUS_ADDR_T(x)	(((x) & 0x03) << 28)
-#define IXP4XX_EXP_BUS_SIZE(x)		(((x) & 0x0f) << 10)
-#define IXP4XX_EXP_BUS_CYCLES(x)	(((x) & 0x03) << 14)
-
-#define IXP4XX_EXP_BUS_CS_EN		(1L << 31)
-#define IXP4XX_EXP_BUS_BYTE_RD16	(1L << 6)
-#define IXP4XX_EXP_BUS_HRDY_POL		(1L << 5)
-#define IXP4XX_EXP_BUS_MUX_EN		(1L << 4)
-#define IXP4XX_EXP_BUS_SPLT_EN		(1L << 3)
-#define IXP4XX_EXP_BUS_WR_EN		(1L << 1)
-#define IXP4XX_EXP_BUS_BYTE_EN		(1L << 0)
-
-#define IXP4XX_EXP_BUS_CYCLES_INTEL	0x00
-#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA	0x01
-#define IXP4XX_EXP_BUS_CYCLES_HPI	0x02
-
-#define IXP4XX_FLASH_WRITABLE	(0x2)
-#define IXP4XX_FLASH_DEFAULT	(0xbcd23c40)
-#define IXP4XX_FLASH_WRITE	(0xbcd23c42)
-
-/*
- * Clock Speed Definitions.
- */
-#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66MHzi APB BUS   */ 
-#define IXP4XX_UART_XTAL        	14745600
-
-/*
- * This structure provide a means for the board setup code
- * to give information to th pata_ixp4xx driver. It is
- * passed as platform_data.
- */
-struct ixp4xx_pata_data {
-	volatile u32	*cs0_cfg;
-	volatile u32	*cs1_cfg;
-	unsigned long	cs0_bits;
-	unsigned long	cs1_bits;
-	void __iomem	*cs0;
-	void __iomem	*cs1;
-};
-
-/*
- * Frequency of clock used for primary clocksource
- */
-extern unsigned long ixp4xx_timer_freq;
-
-/*
- * Functions used by platform-level setup code
- */
-extern void ixp4xx_map_io(void);
-extern void ixp4xx_init_early(void);
-extern void ixp4xx_init_irq(void);
-extern void ixp4xx_sys_init(void);
-extern void ixp4xx_timer_init(void);
-extern void ixp4xx_restart(enum reboot_mode, const char *);
-extern void ixp4xx_pci_preinit(void);
-struct pci_sys_data;
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_ops ixp4xx_ops;
-
-#endif // __ASSEMBLY__
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/udc.h b/arch/arm/mach-ixp4xx/include/mach/udc.h
deleted file mode 100644
index 7bd8b96c8843..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/udc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/udc.h
- *
- */
-#include <linux/platform_data/pxa2xx_udc.h>
-
-extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
deleted file mode 100644
index 9e08b270cfc7..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/uncompress.h 
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#ifndef _ARCH_UNCOMPRESS_H_
-#define _ARCH_UNCOMPRESS_H_
-
-#include "ixp4xx-regs.h"
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-
-#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
-
-volatile u32* uart_base;
-
-static inline void putc(int c)
-{
-	/* Check THRE and TEMT bits before we transmit the character.
-	 */
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-
-	*uart_base = c;
-}
-
-static void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	/*
-	 * Some boards are using UART2 as console
-	 */
-	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
-	    machine_is_gateway7001() || machine_is_wg302v2() ||
-	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
-		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
-	else
-		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
-}
-
-/*
- * arch_id is a variable in decompress_kernel()
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/irqs.h b/arch/arm/mach-ixp4xx/irqs.h
deleted file mode 100644
index a3e8d6408c56..000000000000
--- a/arch/arm/mach-ixp4xx/irqs.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/irqs.h 
- *
- * IRQ definitions for IXP4XX based systems
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 MontaVista Software, Inc.
- */
-
-#ifndef _ARCH_IXP4XX_IRQS_H_
-#define _ARCH_IXP4XX_IRQS_H_
-
-#define IRQ_IXP4XX_BASE		16
-
-#define IRQ_IXP4XX_NPEA		(IRQ_IXP4XX_BASE + 0)
-#define IRQ_IXP4XX_NPEB		(IRQ_IXP4XX_BASE + 1)
-#define IRQ_IXP4XX_NPEC		(IRQ_IXP4XX_BASE + 2)
-#define IRQ_IXP4XX_QM1		(IRQ_IXP4XX_BASE + 3)
-#define IRQ_IXP4XX_QM2		(IRQ_IXP4XX_BASE + 4)
-#define IRQ_IXP4XX_TIMER1	(IRQ_IXP4XX_BASE + 5)
-#define IRQ_IXP4XX_GPIO0	(IRQ_IXP4XX_BASE + 6)
-#define IRQ_IXP4XX_GPIO1	(IRQ_IXP4XX_BASE + 7)
-#define IRQ_IXP4XX_PCI_INT	(IRQ_IXP4XX_BASE + 8)
-#define IRQ_IXP4XX_PCI_DMA1	(IRQ_IXP4XX_BASE + 9)
-#define IRQ_IXP4XX_PCI_DMA2	(IRQ_IXP4XX_BASE + 10)
-#define IRQ_IXP4XX_TIMER2	(IRQ_IXP4XX_BASE + 11)
-#define IRQ_IXP4XX_USB		(IRQ_IXP4XX_BASE + 12)
-#define IRQ_IXP4XX_UART2	(IRQ_IXP4XX_BASE + 13)
-#define IRQ_IXP4XX_TIMESTAMP	(IRQ_IXP4XX_BASE + 14)
-#define IRQ_IXP4XX_UART1	(IRQ_IXP4XX_BASE + 15)
-#define IRQ_IXP4XX_WDOG		(IRQ_IXP4XX_BASE + 16)
-#define IRQ_IXP4XX_AHB_PMU	(IRQ_IXP4XX_BASE + 17)
-#define IRQ_IXP4XX_XSCALE_PMU	(IRQ_IXP4XX_BASE + 18)
-#define IRQ_IXP4XX_GPIO2	(IRQ_IXP4XX_BASE + 19)
-#define IRQ_IXP4XX_GPIO3	(IRQ_IXP4XX_BASE + 20)
-#define IRQ_IXP4XX_GPIO4	(IRQ_IXP4XX_BASE + 21)
-#define IRQ_IXP4XX_GPIO5	(IRQ_IXP4XX_BASE + 22)
-#define IRQ_IXP4XX_GPIO6	(IRQ_IXP4XX_BASE + 23)
-#define IRQ_IXP4XX_GPIO7	(IRQ_IXP4XX_BASE + 24)
-#define IRQ_IXP4XX_GPIO8	(IRQ_IXP4XX_BASE + 25)
-#define IRQ_IXP4XX_GPIO9	(IRQ_IXP4XX_BASE + 26)
-#define IRQ_IXP4XX_GPIO10	(IRQ_IXP4XX_BASE + 27)
-#define IRQ_IXP4XX_GPIO11	(IRQ_IXP4XX_BASE + 28)
-#define IRQ_IXP4XX_GPIO12	(IRQ_IXP4XX_BASE + 29)
-#define IRQ_IXP4XX_SW_INT1	(IRQ_IXP4XX_BASE + 30)
-#define IRQ_IXP4XX_SW_INT2	(IRQ_IXP4XX_BASE + 31)
-#define IRQ_IXP4XX_USB_HOST	(IRQ_IXP4XX_BASE + 32)
-#define IRQ_IXP4XX_I2C		(IRQ_IXP4XX_BASE + 33)
-#define IRQ_IXP4XX_SSP		(IRQ_IXP4XX_BASE + 34)
-#define IRQ_IXP4XX_TSYNC	(IRQ_IXP4XX_BASE + 35)
-#define IRQ_IXP4XX_EAU_DONE	(IRQ_IXP4XX_BASE + 36)
-#define IRQ_IXP4XX_SHA_DONE	(IRQ_IXP4XX_BASE + 37)
-#define IRQ_IXP4XX_SWCP_PE	(IRQ_IXP4XX_BASE + 58)
-#define IRQ_IXP4XX_QM_PE	(IRQ_IXP4XX_BASE + 60)
-#define IRQ_IXP4XX_MCU_ECC	(IRQ_IXP4XX_BASE + 61)
-#define IRQ_IXP4XX_EXP_PE	(IRQ_IXP4XX_BASE + 62)
-
-#define _IXP4XX_GPIO_IRQ(n)	(IRQ_IXP4XX_GPIO ## n)
-#define IXP4XX_GPIO_IRQ(n)	_IXP4XX_GPIO_IRQ(n)
-
-#define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
deleted file mode 100644
index c77fe0d52d79..000000000000
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/ixdp425-pci.c
- *
- * IXDP425 board-level PCI initialization
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <asm/mach/pci.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include "irqs.h"
-
-#define MAX_DEV		4
-#define IRQ_LINES	4
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA		11
-#define INTB		10
-#define INTC		9
-#define INTD		8
-
-
-void __init ixdp425_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init ixdp425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[IRQ_LINES] = {
-		IXP4XX_GPIO_IRQ(INTA),
-		IXP4XX_GPIO_IRQ(INTB),
-		IXP4XX_GPIO_IRQ(INTC),
-		IXP4XX_GPIO_IRQ(INTD)
-	};
-
-	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-		return pci_irq_table[(slot + pin - 2) % 4];
-
-	return -1;
-}
-
-struct hw_pci ixdp425_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit	= ixdp425_pci_preinit,
-	.setup		= ixp4xx_setup,
-	.map_irq	= ixdp425_map_irq,
-};
-
-int __init ixdp425_pci_init(void)
-{
-	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
-			machine_is_ixdp465() || machine_is_kixrp435())
-		pci_common_init(&ixdp425_pci);
-	return 0;
-}
-
-subsys_initcall(ixdp425_pci_init);
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
deleted file mode 100644
index 45d5b720ded6..000000000000
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ /dev/null
@@ -1,339 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/ixdp425-setup.c
- *
- * IXDP425/IXCDP1100 board-setup
- *
- * Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <linux/gpio/machine.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/platnand.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-#define IXDP425_SDA_PIN		7
-#define IXDP425_SCL_PIN		6
-
-/* NAND Flash pins */
-#define IXDP425_NAND_NCE_PIN	12
-
-#define IXDP425_NAND_CMD_BYTE	0x01
-#define IXDP425_NAND_ADDR_BYTE	0x02
-
-static struct flash_platform_data ixdp425_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource ixdp425_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp425_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &ixdp425_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ixdp425_flash_resource,
-};
-
-#if defined(CONFIG_MTD_NAND_PLATFORM) || \
-    defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-
-static struct mtd_partition ixdp425_partitions[] = {
-	{
-		.name	= "ixp400 NAND FS 0",
-		.offset	= 0,
-		.size 	= SZ_8M
-	}, {
-		.name	= "ixp400 NAND FS 1",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL
-	},
-};
-
-static void
-ixdp425_flash_nand_cmd_ctrl(struct nand_chip *this, int cmd, unsigned int ctrl)
-{
-	int offset = (int)nand_get_controller_data(this);
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if (ctrl & NAND_NCE) {
-			gpio_set_value(IXDP425_NAND_NCE_PIN, 0);
-			udelay(5);
-		} else
-			gpio_set_value(IXDP425_NAND_NCE_PIN, 1);
-
-		offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0;
-		offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0;
-		nand_set_controller_data(this, (void *)offset);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->legacy.IO_ADDR_W + offset);
-}
-
-static struct platform_nand_data ixdp425_flash_nand_data = {
-	.chip = {
-		.nr_chips		= 1,
-		.chip_delay		= 30,
-		.partitions	 	= ixdp425_partitions,
-		.nr_partitions	 	= ARRAY_SIZE(ixdp425_partitions),
-	},
-	.ctrl = {
-		.cmd_ctrl 		= ixdp425_flash_nand_cmd_ctrl
-	}
-};
-
-static struct resource ixdp425_flash_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp425_flash_nand = {
-	.name		= "gen_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &ixdp425_flash_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ixdp425_flash_nand_resource,
-};
-#endif	/* CONFIG_MTD_NAND_PLATFORM */
-
-static struct gpiod_lookup_table ixdp425_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio.0",
-	.table		= {
-		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SDA_PIN,
-				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SCL_PIN,
-				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct platform_device ixdp425_i2c_gpio = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev	 = {
-		.platform_data	= NULL,
-	},
-};
-
-static struct resource ixdp425_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM
-	}
-};
-
-static struct plat_serial8250_port ixdp425_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device ixdp425_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= ixdp425_uart_data,
-	.num_resources		= 2,
-	.resource		= ixdp425_uart_resources
-};
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct resource ixp425_npeb_resources[] = {
-	{
-		.start		= IXP4XX_EthB_BASE_PHYS,
-		.end		= IXP4XX_EthB_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource ixp425_npec_resources[] = {
-	{
-		.start		= IXP4XX_EthC_BASE_PHYS,
-		.end		= IXP4XX_EthC_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct eth_plat_info ixdp425_plat_eth[] = {
-	{
-		.phy		= 0,
-		.rxq		= 3,
-		.txreadyq	= 20,
-	}, {
-		.phy		= 1,
-		.rxq		= 4,
-		.txreadyq	= 21,
-	}
-};
-
-static struct platform_device ixdp425_eth[] = {
-	{
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev.platform_data	= ixdp425_plat_eth,
-		.num_resources		= ARRAY_SIZE(ixp425_npeb_resources),
-		.resource		= ixp425_npeb_resources,
-	}, {
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEC,
-		.dev.platform_data	= ixdp425_plat_eth + 1,
-		.num_resources		= ARRAY_SIZE(ixp425_npec_resources),
-		.resource		= ixp425_npec_resources,
-	}
-};
-
-static struct platform_device *ixdp425_devices[] __initdata = {
-	&ixdp425_i2c_gpio,
-	&ixdp425_flash,
-#if defined(CONFIG_MTD_NAND_PLATFORM) || \
-    defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-	&ixdp425_flash_nand,
-#endif
-	&ixdp425_uart,
-	&ixdp425_eth[0],
-	&ixdp425_eth[1],
-};
-
-static void __init ixdp425_init(void)
-{
-	ixp4xx_sys_init();
-
-	ixdp425_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	ixdp425_flash_resource.end =
-		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-#if defined(CONFIG_MTD_NAND_PLATFORM) || \
-    defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-	ixdp425_flash_nand_resource.start = IXP4XX_EXP_BUS_BASE(3),
-	ixdp425_flash_nand_resource.end   = IXP4XX_EXP_BUS_BASE(3) + 0x10 - 1;
-
-	gpio_request(IXDP425_NAND_NCE_PIN, "NAND NCE pin");
-	gpio_direction_output(IXDP425_NAND_NCE_PIN, 0);
-
-	/* Configure expansion bus for NAND Flash */
-	*IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN |
-			  IXP4XX_EXP_BUS_STROBE_T(1) |	/* extend by 1 clock */
-			  IXP4XX_EXP_BUS_CYCLES(0) |	/* Intel cycles */
-			  IXP4XX_EXP_BUS_SIZE(0) |	/* 512bytes addr space*/
-			  IXP4XX_EXP_BUS_WR_EN |
-			  IXP4XX_EXP_BUS_BYTE_EN;	/* 8 bit data bus */
-#endif
-
-	if (cpu_is_ixp43x()) {
-		ixdp425_uart.num_resources = 1;
-		ixdp425_uart_data[1].flags = 0;
-	}
-
-	gpiod_add_lookup_table(&ixdp425_i2c_gpiod_table);
-	platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices));
-}
-
-#ifdef CONFIG_ARCH_IXDP425
-MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= ixdp425_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_IXDP465
-MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= ixdp425_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-MACHINE_END
-#endif
-
-#ifdef CONFIG_ARCH_PRPMC1100
-MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= ixdp425_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_KIXRP435
-MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= ixdp425_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
deleted file mode 100644
index 1cbea65897b2..000000000000
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/ixdpg425-pci.c
- *
- * PCI setup routines for Intel IXDPG425 Platform
- *
- * Copyright (C) 2004 MontaVista Softwrae, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-#include "irqs.h"
-
-void __init ixdpg425_pci_preinit(void)
-{
-	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
-
-	ixp4xx_pci_preinit();
-}
-
-static int __init ixdpg425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (slot == 12 || slot == 13)
-		return IRQ_IXP4XX_GPIO7;
-	else if (slot == 14)
-		return IRQ_IXP4XX_GPIO6;
-	else return -1;
-}
-
-struct hw_pci ixdpg425_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit =        ixdpg425_pci_preinit,
-	.setup =          ixp4xx_setup,
-	.map_irq =        ixdpg425_map_irq,
-};
-
-int __init ixdpg425_pci_init(void)
-{
-	if (machine_is_ixdpg425())
-		pci_common_init(&ixdpg425_pci);
-	return 0;
-}
-
-subsys_initcall(ixdpg425_pci_init);
diff --git a/arch/arm/mach-ixp4xx/ixp4xx-of.c b/arch/arm/mach-ixp4xx/ixp4xx-of.c
index 7449b8319c8a..1b4d84a5b02f 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx-of.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx-of.c
@@ -2,47 +2,10 @@
 /*
  * IXP4xx Device Tree boot support
  */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/ixp4xx-regs.h>
-
-static struct map_desc ixp4xx_of_io_desc[] __initdata = {
-	/*
-	 * This is needed for runtime system configuration checks,
-	 * such as reading if hardware so-and-so is present. This
-	 * could eventually be converted into a syscon once all boards
-	 * are converted to device tree.
-	 */
-	{
-		.virtual = IXP4XX_EXP_CFG_BASE_VIRT,
-		.pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
-		.length = SZ_4K,
-		.type = MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_UART_8250
-	/* This is needed for LL-debug/earlyprintk/debug-macro.S */
-	{
-		.virtual = CONFIG_DEBUG_UART_VIRT,
-		.pfn = __phys_to_pfn(CONFIG_DEBUG_UART_PHYS),
-		.length = SZ_4K,
-		.type = MT_DEVICE,
-	},
-#endif
-};
-
-static void __init ixp4xx_of_map_io(void)
-{
-	iotable_init(ixp4xx_of_io_desc, ARRAY_SIZE(ixp4xx_of_io_desc));
-}
 
 /*
- * We handle 4 differen SoC families. These compatible strings are enough
+ * We handle 4 different SoC families. These compatible strings are enough
  * to provide the core so that different boards can add their more detailed
  * specifics.
  */
@@ -55,6 +18,5 @@ static const char *ixp4xx_of_board_compat[] = {
 };
 
 DT_MACHINE_START(IXP4XX_DT, "IXP4xx (Device Tree)")
-	.map_io		= ixp4xx_of_map_io,
 	.dt_compat	= ixp4xx_of_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/miccpt-pci.c b/arch/arm/mach-ixp4xx/miccpt-pci.c
deleted file mode 100644
index 55a36537ee1a..000000000000
--- a/arch/arm/mach-ixp4xx/miccpt-pci.c
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/miccpt-pci.c
- *
- * MICCPT board-level PCI initialization
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- * Copyright (C) 2006 OMICRON electronics GmbH
- *
- * Author: Michael Jochum <michael.jochum@omicron.at>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include "irqs.h"
-
-#define MAX_DEV		4
-#define IRQ_LINES	4
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA		1
-#define INTB		2
-#define INTC		3
-#define INTD		4
-
-
-void __init miccpt_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[IRQ_LINES] = {
-		IXP4XX_GPIO_IRQ(INTA),
-		IXP4XX_GPIO_IRQ(INTB),
-		IXP4XX_GPIO_IRQ(INTC),
-		IXP4XX_GPIO_IRQ(INTD)
-	};
-
-	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-		return pci_irq_table[(slot + pin - 2) % 4];
-
-	return -1;
-}
-
-struct hw_pci miccpt_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit	= miccpt_pci_preinit,
-	.setup		= ixp4xx_setup,
-	.map_irq	= miccpt_map_irq,
-};
-
-int __init miccpt_pci_init(void)
-{
-	if (machine_is_miccpt())
-		pci_common_init(&miccpt_pci);
-	return 0;
-}
-
-subsys_initcall(miccpt_pci_init);
diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c
deleted file mode 100644
index 1176f9cb4865..000000000000
--- a/arch/arm/mach-ixp4xx/nas100d-pci.c
+++ /dev/null
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/nas100d-pci.c
- *
- * NAS 100d board-level PCI initialization
- *
- * based on ixdp425-pci.c:
- *	Copyright (C) 2002 Intel Corporation.
- *	Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Maintainer: http://www.nslu2-linux.org/
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#include "irqs.h"
-
-#define MAX_DEV		3
-#define IRQ_LINES	3
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA		11
-#define INTB		10
-#define INTC		9
-#define INTD		8
-#define INTE		7
-
-void __init nas100d_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init nas100d_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[MAX_DEV][IRQ_LINES] = {
-		{ IXP4XX_GPIO_IRQ(INTA), -1, -1 },
-		{ IXP4XX_GPIO_IRQ(INTB), -1, -1 },
-		{ IXP4XX_GPIO_IRQ(INTC), IXP4XX_GPIO_IRQ(INTD),
-		  IXP4XX_GPIO_IRQ(INTE) },
-	};
-
-	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-		return pci_irq_table[slot - 1][pin - 1];
-
-	return -1;
-}
-
-struct hw_pci __initdata nas100d_pci = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit	= nas100d_pci_preinit,
-	.setup		= ixp4xx_setup,
-	.map_irq	= nas100d_map_irq,
-};
-
-int __init nas100d_pci_init(void)
-{
-	if (machine_is_nas100d())
-		pci_common_init(&nas100d_pci);
-
-	return 0;
-}
-
-subsys_initcall(nas100d_pci_init);
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
deleted file mode 100644
index 6959ad2e3aec..000000000000
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ /dev/null
@@ -1,352 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/nas100d-setup.c
- *
- * NAS 100d board-setup
- *
- * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
- *
- * based on ixdp425-setup.c:
- *      Copyright (C) 2003-2004 MontaVista Software, Inc.
- * based on nas100d-power.c:
- *	Copyright (C) 2005 Tower Technologies
- * based on nas100d-io.c
- *	Copyright (C) 2004 Karen Spearel
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Author: Rod Whitby <rod@whitby.id.au>
- * Maintainers: http://www.nslu2-linux.org/
- *
- */
-#include <linux/gpio.h>
-#include <linux/if_ether.h>
-#include <linux/irq.h>
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/leds.h>
-#include <linux/reboot.h>
-#include <linux/i2c.h>
-#include <linux/gpio/machine.h>
-#include <linux/io.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-#define NAS100D_SDA_PIN		5
-#define NAS100D_SCL_PIN		6
-
-/* Buttons */
-#define NAS100D_PB_GPIO         14   /* power button */
-#define NAS100D_RB_GPIO         4    /* reset button */
-
-/* Power control */
-#define NAS100D_PO_GPIO         12   /* power off */
-
-/* LEDs */
-#define NAS100D_LED_WLAN_GPIO	0
-#define NAS100D_LED_DISK_GPIO	3
-#define NAS100D_LED_PWR_GPIO	15
-
-static struct flash_platform_data nas100d_flash_data = {
-	.map_name		= "cfi_probe",
-	.width			= 2,
-};
-
-static struct resource nas100d_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device nas100d_flash = {
-	.name			= "IXP4XX-Flash",
-	.id			= 0,
-	.dev.platform_data	= &nas100d_flash_data,
-	.num_resources		= 1,
-	.resource		= &nas100d_flash_resource,
-};
-
-static struct i2c_board_info __initdata nas100d_i2c_board_info [] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-static struct gpio_led nas100d_led_pins[] = {
-	{
-		.name		= "nas100d:green:wlan",
-		.gpio		= NAS100D_LED_WLAN_GPIO,
-		.active_low	= true,
-	},
-	{
-		.name		= "nas100d:blue:power",  /* (off=flashing) */
-		.gpio		= NAS100D_LED_PWR_GPIO,
-		.active_low	= true,
-	},
-	{
-		.name		= "nas100d:yellow:disk",
-		.gpio		= NAS100D_LED_DISK_GPIO,
-		.active_low	= true,
-	},
-};
-
-static struct gpio_led_platform_data nas100d_led_data = {
-	.num_leds		= ARRAY_SIZE(nas100d_led_pins),
-	.leds			= nas100d_led_pins,
-};
-
-static struct platform_device nas100d_leds = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &nas100d_led_data,
-};
-
-static struct gpiod_lookup_table nas100d_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio.0",
-	.table		= {
-		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NAS100D_SDA_PIN,
-				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NAS100D_SCL_PIN,
-				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct platform_device nas100d_i2c_gpio = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev	 = {
-		.platform_data	= NULL,
-	},
-};
-
-static struct resource nas100d_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct plat_serial8250_port nas100d_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ }
-};
-
-static struct platform_device nas100d_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= nas100d_uart_data,
-	.num_resources		= 2,
-	.resource		= nas100d_uart_resources,
-};
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct resource nas100d_eth_resources[] = {
-	{
-		.start		= IXP4XX_EthB_BASE_PHYS,
-		.end		= IXP4XX_EthB_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct eth_plat_info nas100d_plat_eth[] = {
-	{
-		.phy		= 0,
-		.rxq		= 3,
-		.txreadyq	= 20,
-	}
-};
-
-static struct platform_device nas100d_eth[] = {
-	{
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev.platform_data	= nas100d_plat_eth,
-		.num_resources		= ARRAY_SIZE(nas100d_eth_resources),
-		.resource		= nas100d_eth_resources,
-	}
-};
-
-static struct platform_device *nas100d_devices[] __initdata = {
-	&nas100d_i2c_gpio,
-	&nas100d_flash,
-	&nas100d_leds,
-	&nas100d_eth[0],
-};
-
-static void nas100d_power_off(void)
-{
-	/* This causes the box to drop the power and go dead. */
-
-	/* enable the pwr cntl gpio and assert power off */
-	gpio_direction_output(NAS100D_PO_GPIO, 1);
-}
-
-/* This is used to make sure the power-button pusher is serious.  The button
- * must be held until the value of this counter reaches zero.
- */
-static int power_button_countdown;
-
-/* Must hold the button down for at least this many counts to be processed */
-#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
-
-static void nas100d_power_handler(struct timer_list *unused);
-static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler);
-
-static void nas100d_power_handler(struct timer_list *unused)
-{
-	/* This routine is called twice per second to check the
-	 * state of the power button.
-	 */
-
-	if (gpio_get_value(NAS100D_PB_GPIO)) {
-
-		/* IO Pin is 1 (button pushed) */
-		if (power_button_countdown > 0)
-			power_button_countdown--;
-
-	} else {
-
-		/* Done on button release, to allow for auto-power-on mods. */
-		if (power_button_countdown == 0) {
-			/* Signal init to do the ctrlaltdel action,
-			 * this will bypass init if it hasn't started
-			 * and do a kernel_restart.
-			 */
-			ctrl_alt_del();
-
-			/* Change the state of the power LED to "blink" */
-			gpio_set_value(NAS100D_LED_PWR_GPIO, 0);
-		} else {
-			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-		}
-	}
-
-	mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
-}
-
-static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
-{
-	/* This is the paper-clip reset, it shuts the machine down directly. */
-	machine_power_off();
-
-	return IRQ_HANDLED;
-}
-
-static int __init nas100d_gpio_init(void)
-{
-	if (!machine_is_nas100d())
-		return 0;
-
-	/*
-	 * The power button on the Iomega NAS100d is on GPIO 14, but
-	 * it cannot handle interrupts on that GPIO line.  So we'll
-	 * have to poll it with a kernel timer.
-	 */
-
-	/* Request the power off GPIO */
-	gpio_request(NAS100D_PO_GPIO, "power off");
-
-	/* Make sure that the power button GPIO is set up as an input */
-	gpio_request(NAS100D_PB_GPIO, "power button");
-	gpio_direction_input(NAS100D_PB_GPIO);
-
-	/* Set the initial value for the power button IRQ handler */
-	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
-	mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
-
-	return 0;
-}
-device_initcall(nas100d_gpio_init);
-
-static void __init nas100d_init(void)
-{
-	uint8_t __iomem *f;
-	int i;
-
-	ixp4xx_sys_init();
-
-	nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	nas100d_flash_resource.end =
-		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-	gpiod_add_lookup_table(&nas100d_i2c_gpiod_table);
-	i2c_register_board_info(0, nas100d_i2c_board_info,
-				ARRAY_SIZE(nas100d_i2c_board_info));
-
-	/*
-	 * This is only useful on a modified machine, but it is valuable
-	 * to have it first in order to see debug messages, and so that
-	 * it does *not* get removed if platform_add_devices fails!
-	 */
-	(void)platform_device_register(&nas100d_uart);
-
-	platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
-
-	pm_power_off = nas100d_power_off;
-
-	if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
-		IRQF_TRIGGER_LOW, "NAS100D reset button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-			gpio_to_irq(NAS100D_RB_GPIO));
-	}
-
-	/*
-	 * Map in a portion of the flash and read the MAC address.
-	 * Since it is stored in BE in the flash itself, we need to
-	 * byteswap it if we're in LE mode.
-	 */
-	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
-	if (f) {
-		for (i = 0; i < 6; i++)
-#ifdef __ARMEB__
-			nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + i);
-#else
-			nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + (i^3));
-#endif
-		iounmap(f);
-	}
-	printk(KERN_INFO "NAS100D: Using MAC address %pM for port 0\n",
-	       nas100d_plat_eth[0].hwaddr);
-
-}
-
-MACHINE_START(NAS100D, "Iomega NAS 100d")
-	/* Maintainer: www.nslu2-linux.org */
-	.atag_offset	= 0x100,
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.init_machine	= nas100d_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c
deleted file mode 100644
index c07936a1d736..000000000000
--- a/arch/arm/mach-ixp4xx/nslu2-pci.c
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/nslu2-pci.c
- *
- * NSLU2 board-level PCI initialization
- *
- * based on ixdp425-pci.c:
- *	Copyright (C) 2002 Intel Corporation.
- *	Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * Maintainer: http://www.nslu2-linux.org/
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#include "irqs.h"
-
-#define MAX_DEV		3
-#define IRQ_LINES	3
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA		11
-#define INTB		10
-#define INTC		9
-#define INTD		8
-
-void __init nslu2_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init nslu2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[IRQ_LINES] = {
-		IXP4XX_GPIO_IRQ(INTA),
-		IXP4XX_GPIO_IRQ(INTB),
-		IXP4XX_GPIO_IRQ(INTC),
-	};
-
-	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-		return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
-
-	return -1;
-}
-
-struct hw_pci __initdata nslu2_pci = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit	= nslu2_pci_preinit,
-	.setup		= ixp4xx_setup,
-	.map_irq	= nslu2_map_irq,
-};
-
-int __init nslu2_pci_init(void) /* monkey see, monkey do */
-{
-	if (machine_is_nslu2())
-		pci_common_init(&nslu2_pci);
-
-	return 0;
-}
-
-subsys_initcall(nslu2_pci_init);
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
deleted file mode 100644
index a428bb918703..000000000000
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ /dev/null
@@ -1,340 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/nslu2-setup.c
- *
- * NSLU2 board-setup
- *
- * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
- *
- * based on ixdp425-setup.c:
- *      Copyright (C) 2003-2004 MontaVista Software, Inc.
- * based on nslu2-power.c:
- *	Copyright (C) 2005 Tower Technologies
- *
- * Author: Mark Rakes <mrakes at mac.com>
- * Author: Rod Whitby <rod@whitby.id.au>
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Maintainers: http://www.nslu2-linux.org/
- *
- */
-#include <linux/gpio.h>
-#include <linux/if_ether.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/leds.h>
-#include <linux/reboot.h>
-#include <linux/i2c.h>
-#include <linux/gpio/machine.h>
-#include <linux/io.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/time.h>
-
-#include "irqs.h"
-
-#define NSLU2_SDA_PIN		7
-#define NSLU2_SCL_PIN		6
-
-/* NSLU2 Timer */
-#define NSLU2_FREQ 66000000
-
-/* Buttons */
-#define NSLU2_PB_GPIO		5	/* power button */
-#define NSLU2_PO_GPIO		8	/* power off */
-#define NSLU2_RB_GPIO		12	/* reset button */
-
-/* Buzzer */
-#define NSLU2_GPIO_BUZZ		4
-
-/* LEDs */
-#define NSLU2_LED_RED_GPIO	0
-#define NSLU2_LED_GRN_GPIO	1
-#define NSLU2_LED_DISK1_GPIO	3
-#define NSLU2_LED_DISK2_GPIO	2
-
-static struct flash_platform_data nslu2_flash_data = {
-	.map_name		= "cfi_probe",
-	.width			= 2,
-};
-
-static struct resource nslu2_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device nslu2_flash = {
-	.name			= "IXP4XX-Flash",
-	.id			= 0,
-	.dev.platform_data	= &nslu2_flash_data,
-	.num_resources		= 1,
-	.resource		= &nslu2_flash_resource,
-};
-
-static struct gpiod_lookup_table nslu2_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio.0",
-	.table		= {
-		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SDA_PIN,
-				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SCL_PIN,
-				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct i2c_board_info __initdata nslu2_i2c_board_info [] = {
-	{
-		I2C_BOARD_INFO("x1205", 0x6f),
-	},
-};
-
-static struct gpio_led nslu2_led_pins[] = {
-	{
-		.name		= "nslu2:green:ready",
-		.gpio		= NSLU2_LED_GRN_GPIO,
-	},
-	{
-		.name		= "nslu2:red:status",
-		.gpio		= NSLU2_LED_RED_GPIO,
-	},
-	{
-		.name		= "nslu2:green:disk-1",
-		.gpio		= NSLU2_LED_DISK1_GPIO,
-		.active_low	= true,
-	},
-	{
-		.name		= "nslu2:green:disk-2",
-		.gpio		= NSLU2_LED_DISK2_GPIO,
-		.active_low	= true,
-	},
-};
-
-static struct gpio_led_platform_data nslu2_led_data = {
-	.num_leds		= ARRAY_SIZE(nslu2_led_pins),
-	.leds			= nslu2_led_pins,
-};
-
-static struct platform_device nslu2_leds = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &nslu2_led_data,
-};
-
-static struct platform_device nslu2_i2c_gpio = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev	 = {
-		.platform_data	= NULL,
-	},
-};
-
-static struct resource nslu2_beeper_resources[] = {
-	{
-		.start	= IRQ_IXP4XX_TIMER2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device nslu2_beeper = {
-	.name			= "ixp4xx-beeper",
-	.id			= NSLU2_GPIO_BUZZ,
-	.resource		= nslu2_beeper_resources,
-	.num_resources		= ARRAY_SIZE(nslu2_beeper_resources),
-};
-
-static struct resource nslu2_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct plat_serial8250_port nslu2_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ }
-};
-
-static struct platform_device nslu2_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= nslu2_uart_data,
-	.num_resources		= 2,
-	.resource		= nslu2_uart_resources,
-};
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct resource nslu2_eth_resources[] = {
-	{
-		.start		= IXP4XX_EthB_BASE_PHYS,
-		.end		= IXP4XX_EthB_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct eth_plat_info nslu2_plat_eth[] = {
-	{
-		.phy		= 1,
-		.rxq		= 3,
-		.txreadyq	= 20,
-	}
-};
-
-static struct platform_device nslu2_eth[] = {
-	{
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev.platform_data	= nslu2_plat_eth,
-		.num_resources		= ARRAY_SIZE(nslu2_eth_resources),
-		.resource		= nslu2_eth_resources,
-	}
-};
-
-static struct platform_device *nslu2_devices[] __initdata = {
-	&nslu2_i2c_gpio,
-	&nslu2_flash,
-	&nslu2_beeper,
-	&nslu2_leds,
-	&nslu2_eth[0],
-};
-
-static void nslu2_power_off(void)
-{
-	/* This causes the box to drop the power and go dead. */
-
-	/* enable the pwr cntl gpio and assert power off */
-	gpio_direction_output(NSLU2_PO_GPIO, 1);
-}
-
-static irqreturn_t nslu2_power_handler(int irq, void *dev_id)
-{
-	/* Signal init to do the ctrlaltdel action, this will bypass init if
-	 * it hasn't started and do a kernel_restart.
-	 */
-	ctrl_alt_del();
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t nslu2_reset_handler(int irq, void *dev_id)
-{
-	/* This is the paper-clip reset, it shuts the machine down directly.
-	 */
-	machine_power_off();
-
-	return IRQ_HANDLED;
-}
-
-static int __init nslu2_gpio_init(void)
-{
-	if (!machine_is_nslu2())
-		return 0;
-
-	/* Request the power off GPIO */
-	return gpio_request(NSLU2_PO_GPIO, "power off");
-}
-device_initcall(nslu2_gpio_init);
-
-static void __init nslu2_timer_init(void)
-{
-    /* The xtal on this machine is non-standard. */
-    ixp4xx_timer_freq = NSLU2_FREQ;
-
-    /* Call standard timer_init function. */
-    ixp4xx_timer_init();
-}
-
-static void __init nslu2_init(void)
-{
-	uint8_t __iomem *f;
-	int i;
-
-	ixp4xx_sys_init();
-
-	nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	nslu2_flash_resource.end =
-		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-	gpiod_add_lookup_table(&nslu2_i2c_gpiod_table);
-	i2c_register_board_info(0, nslu2_i2c_board_info,
-				ARRAY_SIZE(nslu2_i2c_board_info));
-
-	/*
-	 * This is only useful on a modified machine, but it is valuable
-	 * to have it first in order to see debug messages, and so that
-	 * it does *not* get removed if platform_add_devices fails!
-	 */
-	(void)platform_device_register(&nslu2_uart);
-
-	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
-
-	pm_power_off = nslu2_power_off;
-
-	if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler,
-		IRQF_TRIGGER_LOW, "NSLU2 reset button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-			gpio_to_irq(NSLU2_RB_GPIO));
-	}
-
-	if (request_irq(gpio_to_irq(NSLU2_PB_GPIO), &nslu2_power_handler,
-		IRQF_TRIGGER_HIGH, "NSLU2 power button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Power Button IRQ %d not available\n",
-			gpio_to_irq(NSLU2_PB_GPIO));
-	}
-
-	/*
-	 * Map in a portion of the flash and read the MAC address.
-	 * Since it is stored in BE in the flash itself, we need to
-	 * byteswap it if we're in LE mode.
-	 */
-	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000);
-	if (f) {
-		for (i = 0; i < 6; i++)
-#ifdef __ARMEB__
-			nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i);
-#else
-			nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + (i^3));
-#endif
-		iounmap(f);
-	}
-	printk(KERN_INFO "NSLU2: Using MAC address %pM for port 0\n",
-	       nslu2_plat_eth[0].hwaddr);
-
-}
-
-MACHINE_START(NSLU2, "Linksys NSLU2")
-	/* Maintainer: www.nslu2-linux.org */
-	.atag_offset	= 0x100,
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= nslu2_timer_init,
-	.init_machine	= nslu2_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
deleted file mode 100644
index 8f2b8c473d7a..000000000000
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ /dev/null
@@ -1,298 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/omixp-setup.c
- *
- * omicron ixp4xx board setup
- *      Copyright (C) 2009 OMICRON electronics GmbH
- *
- * based nslu2-setup.c, ixdp425-setup.c:
- *      Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#include <linux/kernel.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/leds.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include <mach/hardware.h>
-
-#include "irqs.h"
-
-static struct resource omixp_flash_resources[] = {
-	{
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition omixp_partitions[] = {
-	{
-		.name =		"Recovery Bootloader",
-		.size =		0x00020000,
-		.offset =	0,
-	}, {
-		.name =		"Calibration Data",
-		.size =		0x00020000,
-		.offset =	0x00020000,
-	}, {
-		.name =		"Recovery FPGA",
-		.size =		0x00020000,
-		.offset =	0x00040000,
-	}, {
-		.name =		"Release Bootloader",
-		.size =		0x00020000,
-		.offset =	0x00060000,
-	}, {
-		.name =		"Release FPGA",
-		.size =		0x00020000,
-		.offset =	0x00080000,
-	}, {
-		.name =		"Kernel",
-		.size =		0x00160000,
-		.offset =	0x000a0000,
-	}, {
-		.name =		"Filesystem",
-		.size =		0x00C00000,
-		.offset =	0x00200000,
-	}, {
-		.name =		"Persistent Storage",
-		.size =		0x00200000,
-		.offset =	0x00E00000,
-	},
-};
-
-static struct flash_platform_data omixp_flash_data[] = {
-	{
-		.map_name	= "cfi_probe",
-		.parts		= omixp_partitions,
-		.nr_parts	= ARRAY_SIZE(omixp_partitions),
-	}, {
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	},
-};
-
-static struct platform_device omixp_flash_device[] = {
-	{
-		.name		= "IXP4XX-Flash",
-		.id		= 0,
-		.dev = {
-			.platform_data = &omixp_flash_data[0],
-		},
-		.resource = &omixp_flash_resources[0],
-		.num_resources = 1,
-	}, {
-		.name		= "IXP4XX-Flash",
-		.id		= 1,
-		.dev = {
-			.platform_data = &omixp_flash_data[1],
-		},
-		.resource = &omixp_flash_resources[1],
-		.num_resources = 1,
-	},
-};
-
-/* Swap UART's - These boards have the console on UART2. The following
- * configuration is used:
- *      ttyS0 .. UART2
- *      ttyS1 .. UART1
- * This way standard images can be used with the kernel that expect
- * the console on ttyS0.
- */
-static struct resource omixp_uart_resources[] = {
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct plat_serial8250_port omixp_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	}, {
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	}, {
-		/* list termination */
-	}
-};
-
-static struct platform_device omixp_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= omixp_uart_data,
-	.num_resources		= 2,
-	.resource		= omixp_uart_resources,
-};
-
-static struct gpio_led mic256_led_pins[] = {
-	{
-		.name		= "LED-A",
-		.gpio		= 7,
-	},
-};
-
-static struct gpio_led_platform_data mic256_led_data = {
-	.num_leds		= ARRAY_SIZE(mic256_led_pins),
-	.leds			= mic256_led_pins,
-};
-
-static struct platform_device mic256_leds = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &mic256_led_data,
-};
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct resource ixp425_npeb_resources[] = {
-	{
-		.start		= IXP4XX_EthB_BASE_PHYS,
-		.end		= IXP4XX_EthB_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource ixp425_npec_resources[] = {
-	{
-		.start		= IXP4XX_EthC_BASE_PHYS,
-		.end		= IXP4XX_EthC_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct eth_plat_info ixdp425_plat_eth[] = {
-	{
-		.phy		= 0,
-		.rxq		= 3,
-		.txreadyq	= 20,
-	}, {
-		.phy		= 1,
-		.rxq		= 4,
-		.txreadyq	= 21,
-	},
-};
-
-static struct platform_device ixdp425_eth[] = {
-	{
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev.platform_data	= ixdp425_plat_eth,
-		.num_resources		= ARRAY_SIZE(ixp425_npeb_resources),
-		.resource		= ixp425_npeb_resources,
-	}, {
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEC,
-		.dev.platform_data	= ixdp425_plat_eth + 1,
-		.num_resources		= ARRAY_SIZE(ixp425_npec_resources),
-		.resource		= ixp425_npec_resources,
-	},
-};
-
-
-static struct platform_device *devixp_pldev[] __initdata = {
-	&omixp_uart,
-	&omixp_flash_device[0],
-	&ixdp425_eth[0],
-	&ixdp425_eth[1],
-};
-
-static struct platform_device *mic256_pldev[] __initdata = {
-	&omixp_uart,
-	&omixp_flash_device[0],
-	&mic256_leds,
-	&ixdp425_eth[0],
-	&ixdp425_eth[1],
-};
-
-static struct platform_device *miccpt_pldev[] __initdata = {
-	&omixp_uart,
-	&omixp_flash_device[0],
-	&omixp_flash_device[1],
-	&ixdp425_eth[0],
-	&ixdp425_eth[1],
-};
-
-static void __init omixp_init(void)
-{
-	ixp4xx_sys_init();
-
-	/* 16MiB Boot Flash */
-	omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0);
-	omixp_flash_resources[0].end   = IXP4XX_EXP_BUS_END(0);
-
-	/* 32 MiB Data Flash */
-	omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-	omixp_flash_resources[1].end   = IXP4XX_EXP_BUS_END(2);
-
-	if (machine_is_devixp())
-		platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev));
-	else if (machine_is_miccpt())
-		platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev));
-	else if (machine_is_mic256())
-		platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev));
-}
-
-#ifdef CONFIG_MACH_DEVIXP
-MACHINE_START(DEVIXP, "Omicron DEVIXP")
-	.atag_offset    = 0x100,
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.init_machine	= omixp_init,
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICCPT
-MACHINE_START(MICCPT, "Omicron MICCPT")
-	.atag_offset    = 0x100,
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.init_machine	= omixp_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MIC256
-MACHINE_START(MIC256, "Omicron MIC256")
-	.atag_offset    = 0x100,
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.init_machine	= omixp_init,
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ixp4xx/vulcan-pci.c b/arch/arm/mach-ixp4xx/vulcan-pci.c
deleted file mode 100644
index caf53922dd3f..000000000000
--- a/arch/arm/mach-ixp4xx/vulcan-pci.c
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arch/mach-ixp4xx/vulcan-pci.c
- *
- * Vulcan board-level PCI initialization
- *
- * Copyright (C) 2010 Marc Zyngier <maz@misterjones.org>
- *
- * based on ixdp425-pci.c:
- *	Copyright (C) 2002 Intel Corporation.
- *	Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#include "irqs.h"
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define INTA	2
-#define INTB	3
-
-void __init vulcan_pci_preinit(void)
-{
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-	/*
-	 * Cardbus bridge wants way more than the SoC can actually offer,
-	 * and leaves the whole PCI bus in a mess. Artificially limit it
-	 * to 8MB per region. Of course indirect mode doesn't have this
-	 * limitation...
-	 */
-	pci_cardbus_mem_size = SZ_8M;
-	pr_info("Vulcan PCI: limiting CardBus memory size to %dMB\n",
-		(int)(pci_cardbus_mem_size >> 20));
-#endif
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static int __init vulcan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (slot == 1)
-		return IXP4XX_GPIO_IRQ(INTA);
-
-	if (slot == 2)
-		return IXP4XX_GPIO_IRQ(INTB);
-
-	return -1;
-}
-
-struct hw_pci vulcan_pci __initdata = {
-	.nr_controllers	= 1,
-	.ops		= &ixp4xx_ops,
-	.preinit	= vulcan_pci_preinit,
-	.setup		= ixp4xx_setup,
-	.map_irq	= vulcan_map_irq,
-};
-
-int __init vulcan_pci_init(void)
-{
-	if (machine_is_arcom_vulcan())
-		pci_common_init(&vulcan_pci);
-	return 0;
-}
-
-subsys_initcall(vulcan_pci_init);
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
deleted file mode 100644
index e506d2af98ad..000000000000
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ /dev/null
@@ -1,282 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/vulcan-setup.c
- *
- * Arcom/Eurotech Vulcan board-setup
- *
- * Copyright (C) 2010 Marc Zyngier <maz@misterjones.org>
- *
- * based on fsg-setup.c:
- *	Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
- */
-
-#include <linux/if_ether.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-#include <linux/w1-gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/mtd/plat-ram.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-static struct flash_platform_data vulcan_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource vulcan_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device vulcan_flash = {
-	.name			= "IXP4XX-Flash",
-	.id			= 0,
-	.dev = {
-		.platform_data	= &vulcan_flash_data,
-	},
-	.resource		= &vulcan_flash_resource,
-	.num_resources		= 1,
-};
-
-static struct platdata_mtd_ram vulcan_sram_data = {
-	.mapname	= "Vulcan SRAM",
-	.bankwidth	= 1,
-};
-
-static struct resource vulcan_sram_resource = {
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device vulcan_sram = {
-	.name			= "mtd-ram",
-	.id			= 0,
-	.dev = {
-		.platform_data	= &vulcan_sram_data,
-	},
-	.resource		= &vulcan_sram_resource,
-	.num_resources		= 1,
-};
-
-static struct resource vulcan_uart_resources[] = {
-	[0] = {
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[2] = {
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct plat_serial8250_port vulcan_uart_data[] = {
-	[0] = {
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	[1] = {
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	[2] = {
-		.irq		= IXP4XX_GPIO_IRQ(4),
-		.irqflags	= IRQF_TRIGGER_LOW,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.uartclk	= 1843200,
-	},
-	[3] = {
-		.irq		= IXP4XX_GPIO_IRQ(4),
-		.irqflags	= IRQF_TRIGGER_LOW,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.uartclk	= 1843200,
-	},
-	{ }
-};
-
-static struct platform_device vulcan_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data	= vulcan_uart_data,
-	},
-	.resource		= vulcan_uart_resources,
-	.num_resources		= ARRAY_SIZE(vulcan_uart_resources),
-};
-
-static struct resource vulcan_npeb_resources[] = {
-	{
-		.start		= IXP4XX_EthB_BASE_PHYS,
-		.end		= IXP4XX_EthB_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource vulcan_npec_resources[] = {
-	{
-		.start		= IXP4XX_EthC_BASE_PHYS,
-		.end		= IXP4XX_EthC_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct eth_plat_info vulcan_plat_eth[] = {
-	[0] = {
-		.phy		= 0,
-		.rxq		= 3,
-		.txreadyq	= 20,
-	},
-	[1] = {
-		.phy		= 1,
-		.rxq		= 4,
-		.txreadyq	= 21,
-	},
-};
-
-static struct platform_device vulcan_eth[] = {
-	[0] = {
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev = {
-			.platform_data	= &vulcan_plat_eth[0],
-		},
-		.num_resources		= ARRAY_SIZE(vulcan_npeb_resources),
-		.resource		= vulcan_npeb_resources,
-	},
-	[1] = {
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEC,
-		.dev = {
-			.platform_data	= &vulcan_plat_eth[1],
-		},
-		.num_resources		= ARRAY_SIZE(vulcan_npec_resources),
-		.resource		= vulcan_npec_resources,
-	},
-};
-
-static struct resource vulcan_max6369_resource = {
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device vulcan_max6369 = {
-	.name			= "max6369_wdt",
-	.id			= -1,
-	.resource		= &vulcan_max6369_resource,
-	.num_resources		= 1,
-};
-
-static struct gpiod_lookup_table vulcan_w1_gpiod_table = {
-	.dev_id = "w1-gpio",
-	.table = {
-		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", 14, NULL, 0,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
-	/* Intentionally left blank */
-};
-
-static struct platform_device vulcan_w1_gpio = {
-	.name			= "w1-gpio",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= &vulcan_w1_gpio_pdata,
-	},
-};
-
-static struct platform_device *vulcan_devices[] __initdata = {
-	&vulcan_uart,
-	&vulcan_flash,
-	&vulcan_sram,
-	&vulcan_max6369,
-	&vulcan_eth[0],
-	&vulcan_eth[1],
-	&vulcan_w1_gpio,
-};
-
-static void __init vulcan_init(void)
-{
-	ixp4xx_sys_init();
-
-	/* Flash is spread over both CS0 and CS1 */
-	vulcan_flash_resource.start	 = IXP4XX_EXP_BUS_BASE(0);
-	vulcan_flash_resource.end	 = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-	*IXP4XX_EXP_CS0 = IXP4XX_EXP_BUS_CS_EN		|
-			  IXP4XX_EXP_BUS_STROBE_T(3)	|
-			  IXP4XX_EXP_BUS_SIZE(0xF)	|
-			  IXP4XX_EXP_BUS_BYTE_RD16	|
-			  IXP4XX_EXP_BUS_WR_EN;
-	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
-	/* SRAM on CS2, (256kB, 8bit, writable) */
-	vulcan_sram_resource.start	= IXP4XX_EXP_BUS_BASE(2);
-	vulcan_sram_resource.end	= IXP4XX_EXP_BUS_BASE(2) + SZ_256K - 1;
-	*IXP4XX_EXP_CS2 = IXP4XX_EXP_BUS_CS_EN		|
-			  IXP4XX_EXP_BUS_STROBE_T(1)	|
-			  IXP4XX_EXP_BUS_HOLD_T(2)	|
-			  IXP4XX_EXP_BUS_SIZE(9)	|
-			  IXP4XX_EXP_BUS_SPLT_EN	|
-			  IXP4XX_EXP_BUS_WR_EN		|
-			  IXP4XX_EXP_BUS_BYTE_EN;
-
-	/* XR16L2551 on CS3 (Moto style, 512 bytes, 8bits, writable) */
-	vulcan_uart_resources[2].start	= IXP4XX_EXP_BUS_BASE(3);
-	vulcan_uart_resources[2].end	= IXP4XX_EXP_BUS_BASE(3) + 16 - 1;
-	vulcan_uart_data[2].mapbase	= vulcan_uart_resources[2].start;
-	vulcan_uart_data[3].mapbase	= vulcan_uart_data[2].mapbase + 8;
-	*IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN		|
-			  IXP4XX_EXP_BUS_STROBE_T(3)	|
-			  IXP4XX_EXP_BUS_CYCLES(IXP4XX_EXP_BUS_CYCLES_MOTOROLA)|
-			  IXP4XX_EXP_BUS_WR_EN		|
-			  IXP4XX_EXP_BUS_BYTE_EN;
-
-	/* GPIOS on CS4 (512 bytes, 8bits, writable) */
-	*IXP4XX_EXP_CS4 = IXP4XX_EXP_BUS_CS_EN		|
-			  IXP4XX_EXP_BUS_WR_EN		|
-			  IXP4XX_EXP_BUS_BYTE_EN;
-
-	/* max6369 on CS5 (512 bytes, 8bits, writable) */
-	vulcan_max6369_resource.start	= IXP4XX_EXP_BUS_BASE(5);
-	vulcan_max6369_resource.end	= IXP4XX_EXP_BUS_BASE(5);
-	*IXP4XX_EXP_CS5 = IXP4XX_EXP_BUS_CS_EN		|
-			  IXP4XX_EXP_BUS_WR_EN		|
-			  IXP4XX_EXP_BUS_BYTE_EN;
-
-	gpiod_add_lookup_table(&vulcan_w1_gpiod_table);
-	platform_add_devices(vulcan_devices, ARRAY_SIZE(vulcan_devices));
-}
-
-MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
-	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= vulcan_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
deleted file mode 100644
index 1247e7c67bc0..000000000000
--- a/arch/arm/mach-ixp4xx/wg302v2-pci.c
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arch/mach-ixp4xx/wg302v2-pci.c
- *
- * PCI setup routines for the Netgear WG302 v2 and WAG302 v2
- *
- * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
- *
- * based on coyote-pci.c:
- *	Copyright (C) 2002 Jungo Software Technologies.
- *	Copyright (C) 2003 MontaVista Software, Inc.
- *
- * Maintainer: Imre Kaloz <kaloz@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-#include "irqs.h"
-
-void __init wg302v2_pci_preinit(void)
-{
-	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-
-	ixp4xx_pci_preinit();
-}
-
-static int __init wg302v2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (slot == 1)
-		return IRQ_IXP4XX_GPIO8;
-	else if (slot == 2)
-		return IRQ_IXP4XX_GPIO9;
-	else return -1;
-}
-
-struct hw_pci wg302v2_pci __initdata = {
-	.nr_controllers = 1,
-	.ops = &ixp4xx_ops,
-	.preinit =        wg302v2_pci_preinit,
-	.setup =          ixp4xx_setup,
-	.map_irq =        wg302v2_map_irq,
-};
-
-int __init wg302v2_pci_init(void)
-{
-	if (machine_is_wg302v2())
-		pci_common_init(&wg302v2_pci);
-	return 0;
-}
-
-subsys_initcall(wg302v2_pci_init);
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
deleted file mode 100644
index 8711e299229b..000000000000
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/wg302-setup.c
- *
- * Board setup for the Netgear WG302 v2 and WAG302 v2
- *
- * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
- *
- * based on coyote-setup.c:
- *      Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Imre Kaloz <kaloz@openwrt.org>
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-static struct flash_platform_data wg302v2_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource wg302v2_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device wg302v2_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &wg302v2_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &wg302v2_flash_resource,
-};
-
-static struct resource wg302v2_uart_resource = {
-	.start	= IXP4XX_UART2_BASE_PHYS,
-	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct plat_serial8250_port wg302v2_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device wg302v2_uart = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= wg302v2_uart_data,
-	},
-	.num_resources	= 1,
-	.resource	= &wg302v2_uart_resource,
-};
-
-static struct platform_device *wg302v2_devices[] __initdata = {
-	&wg302v2_flash,
-	&wg302v2_uart,
-};
-
-static void __init wg302v2_init(void)
-{
-	ixp4xx_sys_init();
-
-	wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-
-	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
-	platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices));
-}
-
-#ifdef CONFIG_MACH_WG302V2
-MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
-	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= wg302v2_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index cfd39f729f8e..de69cc2dd483 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -8,7 +8,6 @@ config ARCH_KEYSTONE
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_ERRATA_798181 if SMP
 	select COMMON_CLK_KEYSTONE
-	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ZONE_DMA if ARM_LPAE
 	select PINCTRL
 	select PM_GENERIC_DOMAINS if PM
diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile
index 739b38be5696..0c1d54aec60f 100644
--- a/arch/arm/mach-keystone/Makefile
+++ b/arch/arm/mach-keystone/Makefile
@@ -1,7 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-obj-y					:= keystone.o smc.o
-
-obj-$(CONFIG_SMP)			+= platsmp.o
+obj-y					:= keystone.o
 
 # PM domain driver for Keystone SOCs
 obj-$(CONFIG_ARCH_KEYSTONE)		+= pm_domain.o
diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
index cd711bfc591f..aa352c2de313 100644
--- a/arch/arm/mach-keystone/keystone.c
+++ b/arch/arm/mach-keystone/keystone.c
@@ -18,7 +18,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <asm/smp_plat.h>
 #include <asm/memory.h>
 
 #include "memory.h"
@@ -65,7 +64,7 @@ static void __init keystone_init(void)
 static long long __init keystone_pv_fixup(void)
 {
 	long long offset;
-	phys_addr_t mem_start, mem_end;
+	u64 mem_start, mem_end;
 
 	mem_start = memblock_start_of_DRAM();
 	mem_end = memblock_end_of_DRAM();
@@ -78,7 +77,7 @@ static long long __init keystone_pv_fixup(void)
 	if (mem_start < KEYSTONE_HIGH_PHYS_START ||
 	    mem_end   > KEYSTONE_HIGH_PHYS_END) {
 		pr_crit("Invalid address space for memory (%08llx-%08llx)\n",
-		        (u64)mem_start, (u64)mem_end);
+		        mem_start, mem_end);
 		return 0;
 	}
 
@@ -103,7 +102,6 @@ DT_MACHINE_START(KEYSTONE, "Keystone")
 #if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
 	.dma_zone_size	= SZ_2G,
 #endif
-	.smp		= smp_ops(keystone_smp_ops),
 	.init_machine	= keystone_init,
 	.dt_compat	= keystone_match,
 	.pv_fixup	= keystone_pv_fixup,
diff --git a/arch/arm/mach-keystone/keystone.h b/arch/arm/mach-keystone/keystone.h
index 438e531cc007..71ff8cd2ee4a 100644
--- a/arch/arm/mach-keystone/keystone.h
+++ b/arch/arm/mach-keystone/keystone.h
@@ -8,13 +8,8 @@
 #ifndef __KEYSTONE_H__
 #define __KEYSTONE_H__
 
-#define KEYSTONE_MON_CPU_UP_IDX		0x00
-
 #ifndef __ASSEMBLER__
 
-extern const struct smp_operations keystone_smp_ops;
-extern void secondary_startup(void);
-extern u32 keystone_cpu_smc(u32 command, u32 cpu, u32 addr);
 extern int keystone_pm_runtime_init(void);
 
 #endif /* __ASSEMBLER__ */
diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c
deleted file mode 100644
index 673fcf3b34b1..000000000000
--- a/arch/arm/mach-keystone/platsmp.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Keystone SOC SMP platform code
- *
- * Copyright 2013 Texas Instruments, Inc.
- *	Cyril Chemparathy <cyril@ti.com>
- *	Santosh Shilimkar <santosh.shillimkar@ti.com>
- *
- * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-#include <linux/pgtable.h>
-
-#include <asm/smp_plat.h>
-#include <asm/prom.h>
-#include <asm/tlbflush.h>
-
-#include "keystone.h"
-
-static int keystone_smp_boot_secondary(unsigned int cpu,
-						struct task_struct *idle)
-{
-	unsigned long start = virt_to_idmap(&secondary_startup);
-	int error;
-
-	pr_debug("keystone-smp: booting cpu %d, vector %08lx\n",
-		 cpu, start);
-
-	error = keystone_cpu_smc(KEYSTONE_MON_CPU_UP_IDX, cpu, start);
-	if (error)
-		pr_err("CPU %d bringup failed with %d\n", cpu, error);
-
-	return error;
-}
-
-const struct smp_operations keystone_smp_ops __initconst = {
-	.smp_boot_secondary	= keystone_smp_boot_secondary,
-};
diff --git a/arch/arm/mach-keystone/smc.S b/arch/arm/mach-keystone/smc.S
deleted file mode 100644
index 21ef75cf5370..000000000000
--- a/arch/arm/mach-keystone/smc.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Keystone Secure APIs
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- * 	Santosh Shilimkar <santosh.shilimkar@ti.com>
- */
-
-#include <linux/linkage.h>
-
-/**
- * u32 keystone_cpu_smc(u32 command, u32 cpu, u32 addr)
- *
- * Low level CPU monitor API
- * @command:	Monitor command.
- * @cpu:	CPU Number
- * @addr:	Kernel jump address for boot CPU
- *
- * Return: Non zero value on failure
- */
-	.arch_extension sec
-ENTRY(keystone_cpu_smc)
-	stmfd   sp!, {r4-r11, lr}
-	smc	#0
-	ldmfd   sp!, {r4-r11, pc}
-ENDPROC(keystone_cpu_smc)
diff --git a/arch/arm/mach-lpc18xx/Makefile.boot b/arch/arm/mach-lpc18xx/Makefile.boot
deleted file mode 100644
index cec195d4fcba..000000000000
--- a/arch/arm/mach-lpc18xx/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# Empty file waiting for deletion once Makefile.boot isn't needed any more.
-# Patch waits for application at
-# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-lpc18xx/board-dt.c b/arch/arm/mach-lpc18xx/board-dt.c
index fdcee78d1bc4..4729eb83401a 100644
--- a/arch/arm/mach-lpc18xx/board-dt.c
+++ b/arch/arm/mach-lpc18xx/board-dt.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree board file for NXP LPC18xx/43xx
  *
  * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig
index ec87c65f4536..35730d3696d0 100644
--- a/arch/arm/mach-lpc32xx/Kconfig
+++ b/arch/arm/mach-lpc32xx/Kconfig
@@ -3,6 +3,7 @@
 config ARCH_LPC32XX
 	bool "NXP LPC32XX"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select ARM_AMBA
 	select CLKSRC_LPC32XX
 	select CPU_ARM926T
diff --git a/arch/arm/mach-lpc32xx/Makefile.boot b/arch/arm/mach-lpc32xx/Makefile.boot
deleted file mode 100644
index 37d09ddb27f8..000000000000
--- a/arch/arm/mach-lpc32xx/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0x80008000
-params_phys-y	:= 0x80000100
-initrd_phys-y	:= 0x82000000
diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c
index b27fa1b9f56c..2572bd89a5e8 100644
--- a/arch/arm/mach-lpc32xx/pm.c
+++ b/arch/arm/mach-lpc32xx/pm.c
@@ -1,13 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-lpc32xx/pm.c
  *
  * Original authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
  * Modified by Kevin Wells <kevin.wells@nxp.com>
  *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2005 (c) MontaVista Software, Inc.
  */
 
 /*
diff --git a/arch/arm/mach-lpc32xx/suspend.S b/arch/arm/mach-lpc32xx/suspend.S
index 3f0a8282ef6f..a95c5e0e4038 100644
--- a/arch/arm/mach-lpc32xx/suspend.S
+++ b/arch/arm/mach-lpc32xx/suspend.S
@@ -1,13 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * arch/arm/mach-lpc32xx/suspend.S
  *
  * Original authors: Dmitry Chigirev, Vitaly Wool <source@mvista.com>
  * Modified by Kevin Wells <kevin.wells@nxp.com>
  *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
+ * 2005 (c) MontaVista Software, Inc.
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
index 9e0f592d87d8..35a3430c7942 100644
--- a/arch/arm/mach-mediatek/Kconfig
+++ b/arch/arm/mach-mediatek/Kconfig
@@ -30,6 +30,7 @@ config MACH_MT7623
 config MACH_MT7629
 	bool "MediaTek MT7629 SoCs support"
 	default ARCH_MEDIATEK
+	select HAVE_ARM_ARCH_TIMER
 
 config MACH_MT8127
 	bool "MediaTek MT8127 SoCs support"
diff --git a/arch/arm/mach-meson/platsmp.c b/arch/arm/mach-meson/platsmp.c
index 4b8ad728bb42..32ac60b89fdc 100644
--- a/arch/arm/mach-meson/platsmp.c
+++ b/arch/arm/mach-meson/platsmp.c
@@ -71,6 +71,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible,
 	}
 
 	sram_base = of_iomap(node, 0);
+	of_node_put(node);
 	if (!sram_base) {
 		pr_err("Couldn't map SRAM registers\n");
 		return;
@@ -91,6 +92,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible,
 	}
 
 	scu_base = of_iomap(node, 0);
+	of_node_put(node);
 	if (!scu_base) {
 		pr_err("Couldn't map SCU registers\n");
 		return;
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 0dd999212944..8c1d4402fd69 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_MMP
 	bool "Marvell PXA168/910/MMP2/MMP3"
-	depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
+	depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V7
 	select GPIO_PXA
 	select GPIOLIB
 	select PINCTRL
@@ -13,98 +13,6 @@ if ARCH_MMP
 
 menu "Marvell PXA168/910/MMP2 Implementations"
 
-if ATAGS
-
-config MACH_ASPENITE
-	bool "Marvell's PXA168 Aspenite Development Board"
-	depends on ARCH_MULTI_V5
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Aspenite Development Board.
-
-config MACH_ZYLONITE2
-	bool "Marvell's PXA168 Zylonite2 Development Board"
-	depends on ARCH_MULTI_V5
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Zylonite2 Development Board.
-
-config MACH_AVENGERS_LITE
-	bool "Marvell's PXA168 Avengers Lite Development Board"
-	depends on ARCH_MULTI_V5
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Avengers Lite Development Board.
-
-config MACH_TAVOREVB
-	bool "Marvell's PXA910 TavorEVB Development Board"
-	depends on ARCH_MULTI_V5
-	select CPU_PXA910
-	help
-	  Say 'Y' here if you want to support the Marvell PXA910-based
-	  TavorEVB Development Board.
-
-config MACH_TTC_DKB
-	bool "Marvell's PXA910 TavorEVB Development Board"
-	depends on ARCH_MULTI_V5
-	select CPU_PXA910
-	help
-	  Say 'Y' here if you want to support the Marvell PXA910-based
-	  TTC_DKB Development Board.
-
-config MACH_BROWNSTONE
-	bool "Marvell's Brownstone Development Platform"
-	depends on ARCH_MULTI_V7
-	select CPU_MMP2
-	help
-	  Say 'Y' here if you want to support the Marvell MMP2-based
-	  Brown Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
-
-config MACH_FLINT
-	bool "Marvell's Flint Development Platform"
-	depends on ARCH_MULTI_V7
-	select CPU_MMP2
-	help
-	  Say 'Y' here if you want to support the Marvell MMP2-based
-	  Flint Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
-
-config MACH_MARVELL_JASPER
-	bool "Marvell's Jasper Development Platform"
-	depends on ARCH_MULTI_V7
-	select CPU_MMP2
-	help
-	  Say 'Y' here if you want to support the Marvell MMP2-base
-	  Jasper Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
-
-config MACH_TETON_BGA
-	bool "Marvell's PXA168 Teton BGA Development Board"
-	depends on ARCH_MULTI_V5
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Teton BGA Development Board.
-
-config MACH_GPLUGD
-	bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
-	depends on ARCH_MULTI_V5
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  GuruPlug Display (gplugD) Board
-endif
-
 config MACH_MMP_DT
 	bool "Support MMP (ARMv5) platforms from device tree"
 	depends on ARCH_MULTI_V5
@@ -168,13 +76,4 @@ config CPU_MMP2
 	help
 	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
 
-config USB_EHCI_MV_U2O
-        bool "EHCI support for PXA USB OTG controller"
-	depends on USB_EHCI_MV
-	help
-	  Enables support for OTG controller which can be switched to host mode.
-
-config MMP_SRAM
-	bool
-
 endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index e3758f7e1fe7..5d4a1a4a48cf 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -2,35 +2,13 @@
 #
 # Makefile for Marvell's PXA168 processors line
 #
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-pxa/include
+obj-y				+= common.o time.o
 
-obj-y				+= common.o devices.o time.o
-
-# SoC support
-obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
-obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
-obj-$(CONFIG_CPU_MMP2)		+= mmp2.o
-obj-$(CONFIG_MMP_SRAM)		+= sram.o
-
-ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_CPU_PXA910)	+= pm-pxa910.o
-obj-$(CONFIG_CPU_MMP2)		+= pm-mmp2.o
-endif
 ifeq ($(CONFIG_SMP),y)
 obj-$(CONFIG_MACH_MMP3_DT)	+= platsmp.o
 endif
 
 # board support
-obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
-obj-$(CONFIG_MACH_ZYLONITE2)	+= aspenite.o
-obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
-obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
-obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
-obj-$(CONFIG_MACH_BROWNSTONE)	+= brownstone.o
-obj-$(CONFIG_MACH_FLINT)	+= flint.o
-obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
 obj-$(CONFIG_MACH_MMP_DT)	+= mmp-dt.o
 obj-$(CONFIG_MACH_MMP2_DT)	+= mmp2-dt.o
 obj-$(CONFIG_MACH_MMP3_DT)	+= mmp3.o
-obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o
-obj-$(CONFIG_MACH_GPLUGD)	+= gplugd.o
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
deleted file mode 100644
index 6314824b62fc..000000000000
--- a/arch/arm/mach-mmp/aspenite.c
+++ /dev/null
@@ -1,284 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/aspenite.c
- *
- *  Support for the Marvell PXA168-based Aspenite and Zylonite2
- *  Development Platform.
- */
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/interrupt.h>
-#include <linux/platform_data/mv_usb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <video/pxa168fb.h>
-#include <linux/input.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-
-#include "addr-map.h"
-#include "mfp-pxa168.h"
-#include "pxa168.h"
-#include "pxa910.h"
-#include "irqs.h"
-#include "common.h"
-
-static unsigned long common_pin_config[] __initdata = {
-	/* Data Flash Interface */
-	GPIO0_DFI_D15,
-	GPIO1_DFI_D14,
-	GPIO2_DFI_D13,
-	GPIO3_DFI_D12,
-	GPIO4_DFI_D11,
-	GPIO5_DFI_D10,
-	GPIO6_DFI_D9,
-	GPIO7_DFI_D8,
-	GPIO8_DFI_D7,
-	GPIO9_DFI_D6,
-	GPIO10_DFI_D5,
-	GPIO11_DFI_D4,
-	GPIO12_DFI_D3,
-	GPIO13_DFI_D2,
-	GPIO14_DFI_D1,
-	GPIO15_DFI_D0,
-
-	/* Static Memory Controller */
-	GPIO18_SMC_nCS0,
-	GPIO34_SMC_nCS1,
-	GPIO23_SMC_nLUA,
-	GPIO25_SMC_nLLA,
-	GPIO28_SMC_RDY,
-	GPIO29_SMC_SCLK,
-	GPIO35_SMC_BE1,
-	GPIO36_SMC_BE2,
-	GPIO27_GPIO,	/* Ethernet IRQ */
-
-	/* UART1 */
-	GPIO107_UART1_RXD,
-	GPIO108_UART1_TXD,
-
-	/* SSP1 */
-	GPIO113_I2S_MCLK,
-	GPIO114_I2S_FRM,
-	GPIO115_I2S_BCLK,
-	GPIO116_I2S_RXD,
-	GPIO117_I2S_TXD,
-
-	/* LCD */
-	GPIO56_LCD_FCLK_RD,
-	GPIO57_LCD_LCLK_A0,
-	GPIO58_LCD_PCLK_WR,
-	GPIO59_LCD_DENA_BIAS,
-	GPIO60_LCD_DD0,
-	GPIO61_LCD_DD1,
-	GPIO62_LCD_DD2,
-	GPIO63_LCD_DD3,
-	GPIO64_LCD_DD4,
-	GPIO65_LCD_DD5,
-	GPIO66_LCD_DD6,
-	GPIO67_LCD_DD7,
-	GPIO68_LCD_DD8,
-	GPIO69_LCD_DD9,
-	GPIO70_LCD_DD10,
-	GPIO71_LCD_DD11,
-	GPIO72_LCD_DD12,
-	GPIO73_LCD_DD13,
-	GPIO74_LCD_DD14,
-	GPIO75_LCD_DD15,
-	GPIO76_LCD_DD16,
-	GPIO77_LCD_DD17,
-	GPIO78_LCD_DD18,
-	GPIO79_LCD_DD19,
-	GPIO80_LCD_DD20,
-	GPIO81_LCD_DD21,
-	GPIO82_LCD_DD22,
-	GPIO83_LCD_DD23,
-
-	/* Keypad */
-	GPIO109_KP_MKIN1,
-	GPIO110_KP_MKIN0,
-	GPIO111_KP_MKOUT7,
-	GPIO112_KP_MKOUT6,
-	GPIO121_KP_MKIN4,
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= SMC_CS1_PHYS_BASE + 0x300,
-		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MMP_GPIO_TO_IRQ(27),
-		.end	= MMP_GPIO_TO_IRQ(27),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct mtd_partition aspenite_nand_partitions[] = {
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_1M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_8M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= (SZ_2M + SZ_1M),
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_32M + SZ_16M,
-		.mask_flags	= 0,
-	}
-};
-
-static struct pxa3xx_nand_platform_data aspenite_nand_info = {
-	.parts		= aspenite_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(aspenite_nand_partitions),
-};
-
-static struct i2c_board_info aspenite_i2c_info[] __initdata = {
-	{ I2C_BOARD_INFO("wm8753", 0x1b), },
-};
-
-static struct fb_videomode video_modes[] = {
-	[0] = {
-		.pixclock	= 30120,
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.hsync_len	= 1,
-		.left_margin	= 215,
-		.right_margin	= 40,
-		.vsync_len	= 1,
-		.upper_margin	= 34,
-		.lower_margin	= 10,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-	},
-};
-
-struct pxa168fb_mach_info aspenite_lcd_info = {
-	.id			= "Graphic Frame",
-	.modes			= video_modes,
-	.num_modes		= ARRAY_SIZE(video_modes),
-	.pix_fmt		= PIX_FMT_RGB565,
-	.io_pin_allocation_mode = PIN_MODE_DUMB_24,
-	.dumb_mode		= DUMB_MODE_RGB888,
-	.active			= 1,
-	.panel_rbswap		= 0,
-	.invert_pixclock	= 0,
-};
-
-static const unsigned int aspenite_matrix_key_map[] = {
-	KEY(0, 6, KEY_UP),	/* SW 4 */
-	KEY(0, 7, KEY_DOWN),	/* SW 5 */
-	KEY(1, 6, KEY_LEFT),	/* SW 6 */
-	KEY(1, 7, KEY_RIGHT),	/* SW 7 */
-	KEY(4, 6, KEY_ENTER),	/* SW 8 */
-	KEY(4, 7, KEY_ESC),	/* SW 9 */
-};
-
-static struct matrix_keymap_data aspenite_matrix_keymap_data = {
-	.keymap			= aspenite_matrix_key_map,
-	.keymap_size		= ARRAY_SIZE(aspenite_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
-	.matrix_key_rows	= 5,
-	.matrix_key_cols	= 8,
-	.matrix_keymap_data	= &aspenite_matrix_keymap_data,
-	.debounce_interval	= 30,
-};
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV)
-static struct mv_usb_platform_data pxa168_sph_pdata = {
-	.mode           = MV_USB_MODE_HOST,
-	.phy_init	= pxa_usb_phy_init,
-	.phy_deinit	= pxa_usb_phy_deinit,
-	.set_vbus	= NULL,
-};
-#endif
-
-static void __init common_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(common_pin_config));
-
-	/* on-chip devices */
-	pxa168_add_uart(1);
-	pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
-	pxa168_add_ssp(1);
-	pxa168_add_nand(&aspenite_nand_info);
-	pxa168_add_fb(&aspenite_lcd_info);
-	pxa168_add_keypad(&aspenite_keypad_info);
-	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa168_device_gpio);
-
-	/* off-chip devices */
-	platform_device_register(&smc91x_device);
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-#if IS_ENABLED(CONFIG_PHY_PXA_USB)
-	platform_device_register(&pxa168_device_usb_phy);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV)
-	pxa168_add_usb_host(&pxa168_sph_pdata);
-#endif
-#endif
-}
-
-MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = common_init,
-	.restart	= pxa168_restart,
-MACHINE_END
-
-MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = common_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
deleted file mode 100644
index 12e5a9441df9..000000000000
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/avengers_lite.c
- *
- *  Support for the Marvell PXA168-based Avengers lite Development Platform.
- *
- *  Copyright (C) 2009-2010 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio-pxa.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-pxa168.h"
-#include "pxa168.h"
-#include "irqs.h"
-
-
-#include "common.h"
-#include <linux/delay.h>
-
-/* Avengers lite MFP configurations */
-static unsigned long avengers_lite_pin_config_V16F[] __initdata = {
-	/* DEBUG_UART */
-	GPIO88_UART2_TXD,
-	GPIO89_UART2_RXD,
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static void __init avengers_lite_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F));
-
-	/* on-chip devices */
-	pxa168_add_uart(2);
-	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa168_device_gpio);
-}
-
-MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = avengers_lite_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
deleted file mode 100644
index ce93bc395546..000000000000
--- a/arch/arm/mach-mmp/brownstone.c
+++ /dev/null
@@ -1,237 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/brownstone.c
- *
- *  Support for the Marvell Brownstone Development Platform.
- *
- *  Copyright (C) 2009-2010 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio-pxa.h>
-#include <linux/gpio/machine.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max8649.h>
-#include <linux/regulator/fixed.h>
-#include <linux/mfd/max8925.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-mmp2.h"
-#include "mmp2.h"
-#include "irqs.h"
-
-#include "common.h"
-
-#define BROWNSTONE_NR_IRQS	(MMP_NR_IRQS + 40)
-
-#define GPIO_5V_ENABLE		(89)
-
-static unsigned long brownstone_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO29_UART1_RXD,
-	GPIO30_UART1_TXD,
-
-	/* UART3 */
-	GPIO51_UART3_RXD,
-	GPIO52_UART3_TXD,
-
-	/* DFI */
-	GPIO168_DFI_D0,
-	GPIO167_DFI_D1,
-	GPIO166_DFI_D2,
-	GPIO165_DFI_D3,
-	GPIO107_DFI_D4,
-	GPIO106_DFI_D5,
-	GPIO105_DFI_D6,
-	GPIO104_DFI_D7,
-	GPIO111_DFI_D8,
-	GPIO164_DFI_D9,
-	GPIO163_DFI_D10,
-	GPIO162_DFI_D11,
-	GPIO161_DFI_D12,
-	GPIO110_DFI_D13,
-	GPIO109_DFI_D14,
-	GPIO108_DFI_D15,
-	GPIO143_ND_nCS0,
-	GPIO144_ND_nCS1,
-	GPIO147_ND_nWE,
-	GPIO148_ND_nRE,
-	GPIO150_ND_ALE,
-	GPIO149_ND_CLE,
-	GPIO112_ND_RDY0,
-	GPIO160_ND_RDY1,
-
-	/* PMIC */
-	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
-
-	/* MMC0 */
-	GPIO131_MMC1_DAT3 | MFP_PULL_HIGH,
-	GPIO132_MMC1_DAT2 | MFP_PULL_HIGH,
-	GPIO133_MMC1_DAT1 | MFP_PULL_HIGH,
-	GPIO134_MMC1_DAT0 | MFP_PULL_HIGH,
-	GPIO136_MMC1_CMD | MFP_PULL_HIGH,
-	GPIO139_MMC1_CLK,
-	GPIO140_MMC1_CD | MFP_PULL_LOW,
-	GPIO141_MMC1_WP | MFP_PULL_LOW,
-
-	/* MMC1 */
-	GPIO37_MMC2_DAT3 | MFP_PULL_HIGH,
-	GPIO38_MMC2_DAT2 | MFP_PULL_HIGH,
-	GPIO39_MMC2_DAT1 | MFP_PULL_HIGH,
-	GPIO40_MMC2_DAT0 | MFP_PULL_HIGH,
-	GPIO41_MMC2_CMD | MFP_PULL_HIGH,
-	GPIO42_MMC2_CLK,
-
-	/* MMC2 */
-	GPIO165_MMC3_DAT7 | MFP_PULL_HIGH,
-	GPIO162_MMC3_DAT6 | MFP_PULL_HIGH,
-	GPIO166_MMC3_DAT5 | MFP_PULL_HIGH,
-	GPIO163_MMC3_DAT4 | MFP_PULL_HIGH,
-	GPIO167_MMC3_DAT3 | MFP_PULL_HIGH,
-	GPIO164_MMC3_DAT2 | MFP_PULL_HIGH,
-	GPIO168_MMC3_DAT1 | MFP_PULL_HIGH,
-	GPIO111_MMC3_DAT0 | MFP_PULL_HIGH,
-	GPIO112_MMC3_CMD | MFP_PULL_HIGH,
-	GPIO151_MMC3_CLK,
-
-	/* 5V regulator */
-	GPIO89_GPIO,
-};
-
-static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct regulator_consumer_supply max8649_supply[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data max8649_init_data = {
-	.constraints	= {
-		.name		= "vcc_core range",
-		.min_uV		= 1150000,
-		.max_uV		= 1280000,
-		.always_on	= 1,
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8649_supply[0],
-};
-
-static struct max8649_platform_data brownstone_max8649_info = {
-	.mode		= 2,	/* VID1 = 1, VID0 = 0 */
-	.extclk		= 0,
-	.ramp_timing	= MAX8649_RAMP_32MV,
-	.regulator	= &max8649_init_data,
-};
-
-static struct regulator_consumer_supply brownstone_v_5vp_supplies[] = {
-	REGULATOR_SUPPLY("v_5vp", NULL),
-};
-
-static struct regulator_init_data brownstone_v_5vp_data = {
-	.constraints	= {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(brownstone_v_5vp_supplies),
-	.consumer_supplies	= brownstone_v_5vp_supplies,
-};
-
-static struct fixed_voltage_config brownstone_v_5vp = {
-	.supply_name		= "v_5vp",
-	.microvolts		= 5000000,
-	.enabled_at_boot	= 1,
-	.init_data		= &brownstone_v_5vp_data,
-};
-
-static struct platform_device brownstone_v_5vp_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &brownstone_v_5vp,
-	},
-};
-
-static struct gpiod_lookup_table brownstone_v_5vp_gpiod_table = {
-	.dev_id = "reg-fixed-voltage.1", /* .id set to 1 above */
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_5V_ENABLE,
-			    NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct max8925_platform_data brownstone_max8925_info = {
-	.irq_base		= MMP_NR_IRQS,
-};
-
-static struct i2c_board_info brownstone_twsi1_info[] = {
-	[0] = {
-		.type		= "max8649",
-		.addr		= 0x60,
-		.platform_data	= &brownstone_max8649_info,
-	},
-	[1] = {
-		.type		= "max8925",
-		.addr		= 0x3c,
-		.irq		= IRQ_MMP2_PMIC,
-		.platform_data	= &brownstone_max8925_info,
-	},
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
-	.clk_delay_cycles = 0x1f,
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc2 = {
-	.clk_delay_cycles = 0x1f,
-	.flags = PXA_FLAG_CARD_PERMANENT
-		| PXA_FLAG_SD_8_BIT_CAPABLE_SLOT,
-};
-
-static struct sram_platdata mmp2_asram_platdata = {
-	.pool_name	= "asram",
-	.granularity	= SRAM_GRANULARITY,
-};
-
-static struct sram_platdata mmp2_isram_platdata = {
-	.pool_name	= "isram",
-	.granularity	= SRAM_GRANULARITY,
-};
-
-static void __init brownstone_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(brownstone_pin_config));
-
-	/* on-chip devices */
-	mmp2_add_uart(1);
-	mmp2_add_uart(3);
-	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&mmp2_device_gpio);
-	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
-	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
-	mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
-	mmp2_add_asram(&mmp2_asram_platdata);
-	mmp2_add_isram(&mmp2_isram_platdata);
-
-	/* enable 5v regulator */
-	gpiod_add_lookup_table(&brownstone_v_5vp_gpiod_table);
-	platform_device_register(&brownstone_v_5vp_device);
-}
-
-MACHINE_START(BROWNSTONE, "Brownstone Development Platform")
-	/* Maintainer: Haojian Zhuang <haojian.zhuang@marvell.com> */
-	.map_io		= mmp_map_io,
-	.nr_irqs	= BROWNSTONE_NR_IRQS,
-	.init_irq	= mmp2_init_irq,
-	.init_time	= mmp2_timer_init,
-	.init_machine	= brownstone_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index e94349d4726c..b3c1a248db31 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -58,8 +58,3 @@ void __init mmp2_map_io(void)
 	mmp_map_io();
 	iotable_init(mmp2_io_desc, ARRAY_SIZE(mmp2_io_desc));
 }
-
-void mmp_restart(enum reboot_mode mode, const char *cmd)
-{
-	soft_restart(0);
-}
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index ed56b3f15b45..e18f05d5d68d 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -1,9 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/reboot.h>
-#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
 extern void mmp_timer_init(int irq, unsigned long rate);
 
 extern void __init mmp_map_io(void);
 extern void __init mmp2_map_io(void);
-extern void mmp_restart(enum reboot_mode, const char *);
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
deleted file mode 100644
index 18bee66a671f..000000000000
--- a/arch/arm/mach-mmp/devices.c
+++ /dev/null
@@ -1,359 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-mmp/devices.c
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-
-#include <asm/irq.h>
-#include "irqs.h"
-#include "devices.h"
-#include <linux/soc/mmp/cputype.h>
-#include "regs-usb.h"
-
-int __init pxa_register_device(struct pxa_device_desc *desc,
-				void *data, size_t size)
-{
-	struct platform_device *pdev;
-	struct resource res[2 + MAX_RESOURCE_DMA];
-	int i, ret = 0, nres = 0;
-
-	pdev = platform_device_alloc(desc->drv_name, desc->id);
-	if (pdev == NULL)
-		return -ENOMEM;
-
-	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
-	memset(res, 0, sizeof(res));
-
-	if (desc->start != -1ul && desc->size > 0) {
-		res[nres].start	= desc->start;
-		res[nres].end	= desc->start + desc->size - 1;
-		res[nres].flags	= IORESOURCE_MEM;
-		nres++;
-	}
-
-	if (desc->irq != NO_IRQ) {
-		res[nres].start	= desc->irq;
-		res[nres].end	= desc->irq;
-		res[nres].flags	= IORESOURCE_IRQ;
-		nres++;
-	}
-
-	for (i = 0; i < MAX_RESOURCE_DMA; i++, nres++) {
-		if (desc->dma[i] == 0)
-			break;
-
-		res[nres].start	= desc->dma[i];
-		res[nres].end	= desc->dma[i];
-		res[nres].flags	= IORESOURCE_DMA;
-	}
-
-	ret = platform_device_add_resources(pdev, res, nres);
-	if (ret) {
-		platform_device_put(pdev);
-		return ret;
-	}
-
-	if (data && size) {
-		ret = platform_device_add_data(pdev, data, size);
-		if (ret) {
-			platform_device_put(pdev);
-			return ret;
-		}
-	}
-
-	return platform_device_add(pdev);
-}
-
-#if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET)
-#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
-#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
-
-/*****************************************************************************
- * The registers read/write routines
- *****************************************************************************/
-
-static unsigned int u2o_get(void __iomem *base, unsigned int offset)
-{
-	return readl_relaxed(base + offset);
-}
-
-static void u2o_set(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	u32 reg;
-
-	reg = readl_relaxed(base + offset);
-	reg |= value;
-	writel_relaxed(reg, base + offset);
-	readl_relaxed(base + offset);
-}
-
-static void u2o_clear(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	u32 reg;
-
-	reg = readl_relaxed(base + offset);
-	reg &= ~value;
-	writel_relaxed(reg, base + offset);
-	readl_relaxed(base + offset);
-}
-
-static void u2o_write(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	writel_relaxed(value, base + offset);
-	readl_relaxed(base + offset);
-}
-
-
-static DEFINE_MUTEX(phy_lock);
-static int phy_init_cnt;
-
-static int usb_phy_init_internal(void __iomem *base)
-{
-	int loops;
-
-	pr_info("Init usb phy!!!\n");
-
-	/* Initialize the USB PHY power */
-	if (cpu_is_pxa910()) {
-		u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
-			| (1<<UTMI_CTRL_PU_REF_SHIFT));
-	}
-
-	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
-	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
-
-	/* UTMI_PLL settings */
-	u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
-		| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
-		| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
-		| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
-
-	u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
-		| 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
-		| 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
-		| 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
-
-	/* UTMI_TX */
-	u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
-		| UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
-		| UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
-		| UTMI_TX_AMP_MASK);
-	u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
-		| 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
-		| 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
-
-	/* UTMI_RX */
-	u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
-		| UTMI_REG_SQ_LENGTH_MASK);
-	u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
-		| 2<<UTMI_REG_SQ_LENGTH_SHIFT);
-
-	/* UTMI_IVREF */
-	if (cpu_is_pxa168())
-		/* fixing Microsoft Altair board interface with NEC hub issue -
-		 * Set UTMI_IVREF from 0x4a3 to 0x4bf */
-		u2o_write(base, UTMI_IVREF, 0x4bf);
-
-	/* toggle VCOCAL_START bit of UTMI_PLL */
-	udelay(200);
-	u2o_set(base, UTMI_PLL, VCOCAL_START);
-	udelay(40);
-	u2o_clear(base, UTMI_PLL, VCOCAL_START);
-
-	/* toggle REG_RCAL_START bit of UTMI_TX */
-	udelay(400);
-	u2o_set(base, UTMI_TX, REG_RCAL_START);
-	udelay(40);
-	u2o_clear(base, UTMI_TX, REG_RCAL_START);
-	udelay(400);
-
-	/* Make sure PHY PLL is ready */
-	loops = 0;
-	while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
-		mdelay(1);
-		loops++;
-		if (loops > 100) {
-			printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n",
-				u2o_get(base, UTMI_PLL));
-			break;
-		}
-	}
-
-	if (cpu_is_pxa168()) {
-		u2o_set(base, UTMI_RESERVE, 1 << 5);
-		/* Turn on UTMI PHY OTG extension */
-		u2o_write(base, UTMI_OTG_ADDON, 1);
-	}
-
-	return 0;
-}
-
-static int usb_phy_deinit_internal(void __iomem *base)
-{
-	pr_info("Deinit usb phy!!!\n");
-
-	if (cpu_is_pxa168())
-		u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
-
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
-	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
-	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
-
-	return 0;
-}
-
-int pxa_usb_phy_init(void __iomem *phy_reg)
-{
-	mutex_lock(&phy_lock);
-	if (phy_init_cnt++ == 0)
-		usb_phy_init_internal(phy_reg);
-	mutex_unlock(&phy_lock);
-	return 0;
-}
-
-void pxa_usb_phy_deinit(void __iomem *phy_reg)
-{
-	WARN_ON(phy_init_cnt == 0);
-
-	mutex_lock(&phy_lock);
-	if (--phy_init_cnt == 0)
-		usb_phy_deinit_internal(phy_reg);
-	mutex_unlock(&phy_lock);
-}
-#endif
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-static u64 __maybe_unused usb_dma_mask = ~(u32)0;
-
-#if IS_ENABLED(CONFIG_PHY_PXA_USB)
-struct resource pxa168_usb_phy_resources[] = {
-	[0] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device pxa168_device_usb_phy = {
-	.name		= "pxa-usb-phy",
-	.id		= -1,
-	.resource	= pxa168_usb_phy_resources,
-	.num_resources	= ARRAY_SIZE(pxa168_usb_phy_resources),
-	.dev		=  {
-		.dma_mask	= &usb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	}
-};
-#endif /* CONFIG_PHY_PXA_USB */
-
-#if IS_ENABLED(CONFIG_USB_MV_UDC)
-struct resource pxa168_u2o_resources[] = {
-	/* regbase */
-	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* phybase */
-	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2o = {
-	.name		= "mv-udc",
-	.id		= -1,
-	.resource	= pxa168_u2o_resources,
-	.num_resources	= ARRAY_SIZE(pxa168_u2o_resources),
-	.dev		=  {
-		.dma_mask	= &usb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	}
-};
-#endif /* CONFIG_USB_MV_UDC */
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
-struct resource pxa168_u2oehci_resources[] = {
-	[0] = {
-		.start	= PXA168_U2O_REGBASE,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2oehci = {
-	.name		= "pxa-u2oehci",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &usb_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-
-	.num_resources	= ARRAY_SIZE(pxa168_u2oehci_resources),
-	.resource	= pxa168_u2oehci_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MV_OTG)
-struct resource pxa168_u2ootg_resources[] = {
-	/* regbase */
-	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* phybase */
-	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2ootg = {
-	.name		= "mv-otg",
-	.id		= -1,
-	.dev  = {
-		.dma_mask          = &usb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-
-	.num_resources	= ARRAY_SIZE(pxa168_u2ootg_resources),
-	.resource      = pxa168_u2ootg_resources,
-};
-#endif /* CONFIG_USB_MV_OTG */
-
-#endif
diff --git a/arch/arm/mach-mmp/devices.h b/arch/arm/mach-mmp/devices.h
deleted file mode 100644
index 4df596c5c201..000000000000
--- a/arch/arm/mach-mmp/devices.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_DEVICE_H
-#define __MACH_DEVICE_H
-
-#include <linux/types.h>
-
-#define MAX_RESOURCE_DMA	2
-
-/* structure for describing the on-chip devices */
-struct pxa_device_desc {
-	const char	*dev_name;
-	const char	*drv_name;
-	int		id;
-	int		irq;
-	unsigned long	start;
-	unsigned long	size;
-	int		dma[MAX_RESOURCE_DMA];
-};
-
-#define PXA168_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
-struct pxa_device_desc pxa168_device_##_name __initdata = {		\
-	.dev_name	= "pxa168-" #_name,				\
-	.drv_name	= _drv,						\
-	.id		= _id,						\
-	.irq		= IRQ_PXA168_##_irq,				\
-	.start		= _start,					\
-	.size		= _size,					\
-	.dma		= { _dma },					\
-};
-
-#define PXA910_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
-struct pxa_device_desc pxa910_device_##_name __initdata = {		\
-	.dev_name	= "pxa910-" #_name,				\
-	.drv_name	= _drv,						\
-	.id		= _id,						\
-	.irq		= IRQ_PXA910_##_irq,				\
-	.start		= _start,					\
-	.size		= _size,					\
-	.dma		= { _dma },					\
-};
-
-#define MMP2_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
-struct pxa_device_desc mmp2_device_##_name __initdata = {		\
-	.dev_name	= "mmp2-" #_name,				\
-	.drv_name	= _drv,						\
-	.id		= _id,						\
-	.irq		= IRQ_MMP2_##_irq,				\
-	.start		= _start,					\
-	.size		= _size,					\
-	.dma		= { _dma },					\
-}
-
-extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
-extern int pxa_usb_phy_init(void __iomem *phy_reg);
-extern void pxa_usb_phy_deinit(void __iomem *phy_reg);
-
-#endif /* __MACH_DEVICE_H */
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
deleted file mode 100644
index 9a7054368e55..000000000000
--- a/arch/arm/mach-mmp/flint.c
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/flint.c
- *
- *  Support for the Marvell Flint Development Platform.
- *
- *  Copyright (C) 2009 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-mmp2.h"
-#include "mmp2.h"
-#include "irqs.h"
-
-#include "common.h"
-
-#define FLINT_NR_IRQS	(MMP_NR_IRQS + 48)
-
-static unsigned long flint_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO45_UART1_RXD,
-	GPIO46_UART1_TXD,
-
-	/* UART2 */
-	GPIO47_UART2_RXD,
-	GPIO48_UART2_TXD,
-
-	/* SMC */
-	GPIO151_SMC_SCLK,
-	GPIO145_SMC_nCS0,
-	GPIO146_SMC_nCS1,
-	GPIO152_SMC_BE0,
-	GPIO153_SMC_BE1,
-	GPIO154_SMC_IRQ,
-	GPIO113_SMC_RDY,
-
-	/*Ethernet*/
-	GPIO155_GPIO,
-
-	/* DFI */
-	GPIO168_DFI_D0,
-	GPIO167_DFI_D1,
-	GPIO166_DFI_D2,
-	GPIO165_DFI_D3,
-	GPIO107_DFI_D4,
-	GPIO106_DFI_D5,
-	GPIO105_DFI_D6,
-	GPIO104_DFI_D7,
-	GPIO111_DFI_D8,
-	GPIO164_DFI_D9,
-	GPIO163_DFI_D10,
-	GPIO162_DFI_D11,
-	GPIO161_DFI_D12,
-	GPIO110_DFI_D13,
-	GPIO109_DFI_D14,
-	GPIO108_DFI_D15,
-	GPIO143_ND_nCS0,
-	GPIO144_ND_nCS1,
-	GPIO147_ND_nWE,
-	GPIO148_ND_nRE,
-	GPIO150_ND_ALE,
-	GPIO149_ND_CLE,
-	GPIO112_ND_RDY0,
-	GPIO160_ND_RDY1,
-};
-
-static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct smc91x_platdata flint_smc91x_info = {
-	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start  = SMC_CS1_PHYS_BASE + 0x300,
-		.end    = SMC_CS1_PHYS_BASE + 0xfffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = MMP_GPIO_TO_IRQ(155),
-		.end    = MMP_GPIO_TO_IRQ(155),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name           = "smc91x",
-	.id             = 0,
-	.dev            = {
-		.platform_data = &flint_smc91x_info,
-	},
-	.num_resources  = ARRAY_SIZE(smc91x_resources),
-	.resource       = smc91x_resources,
-};
-
-static void __init flint_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(flint_pin_config));
-
-	/* on-chip devices */
-	mmp2_add_uart(1);
-	mmp2_add_uart(2);
-	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&mmp2_device_gpio);
-
-	/* off-chip devices */
-	platform_device_register(&smc91x_device);
-}
-
-MACHINE_START(FLINT, "Flint Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= FLINT_NR_IRQS,
-	.init_irq       = mmp2_init_irq,
-	.init_time	= mmp2_timer_init,
-	.init_machine   = flint_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
deleted file mode 100644
index 5888b71944b8..000000000000
--- a/arch/arm/mach-mmp/gplugd.c
+++ /dev/null
@@ -1,206 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/gplugd.c
- *
- *  Support for the Marvell PXA168-based GuruPlug Display (gplugD) Platform.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "irqs.h"
-#include "pxa168.h"
-#include "mfp-pxa168.h"
-
-#include "common.h"
-
-static unsigned long gplugd_pin_config[] __initdata = {
-	/* UART3 */
-	GPIO8_UART3_TXD,
-	GPIO9_UART3_RXD,
-	GPIO1O_UART3_CTS,
-	GPIO11_UART3_RTS,
-
-	/* USB OTG PEN */
-	GPIO18_GPIO,
-
-	/* MMC2 */
-	GPIO28_MMC2_CMD,
-	GPIO29_MMC2_CLK,
-	GPIO30_MMC2_DAT0,
-	GPIO31_MMC2_DAT1,
-	GPIO32_MMC2_DAT2,
-	GPIO33_MMC2_DAT3,
-
-	/* LCD & HDMI clock selection GPIO: 0: 74.176MHz, 1: 74.25 MHz */
-	GPIO35_GPIO,
-	GPIO36_GPIO, /* CEC Interrupt */
-
-	/* MMC1 */
-	GPIO43_MMC1_CLK,
-	GPIO49_MMC1_CMD,
-	GPIO41_MMC1_DAT0,
-	GPIO40_MMC1_DAT1,
-	GPIO52_MMC1_DAT2,
-	GPIO51_MMC1_DAT3,
-	GPIO53_MMC1_CD,
-
-	/* LCD */
-	GPIO56_LCD_FCLK_RD,
-	GPIO57_LCD_LCLK_A0,
-	GPIO58_LCD_PCLK_WR,
-	GPIO59_LCD_DENA_BIAS,
-	GPIO60_LCD_DD0,
-	GPIO61_LCD_DD1,
-	GPIO62_LCD_DD2,
-	GPIO63_LCD_DD3,
-	GPIO64_LCD_DD4,
-	GPIO65_LCD_DD5,
-	GPIO66_LCD_DD6,
-	GPIO67_LCD_DD7,
-	GPIO68_LCD_DD8,
-	GPIO69_LCD_DD9,
-	GPIO70_LCD_DD10,
-	GPIO71_LCD_DD11,
-	GPIO72_LCD_DD12,
-	GPIO73_LCD_DD13,
-	GPIO74_LCD_DD14,
-	GPIO75_LCD_DD15,
-	GPIO76_LCD_DD16,
-	GPIO77_LCD_DD17,
-	GPIO78_LCD_DD18,
-	GPIO79_LCD_DD19,
-	GPIO80_LCD_DD20,
-	GPIO81_LCD_DD21,
-	GPIO82_LCD_DD22,
-	GPIO83_LCD_DD23,
-
-	/* GPIO */
-	GPIO84_GPIO,
-	GPIO85_GPIO,
-
-	/* Fast-Ethernet*/
-	GPIO86_TX_CLK,
-	GPIO87_TX_EN,
-	GPIO88_TX_DQ3,
-	GPIO89_TX_DQ2,
-	GPIO90_TX_DQ1,
-	GPIO91_TX_DQ0,
-	GPIO92_MII_CRS,
-	GPIO93_MII_COL,
-	GPIO94_RX_CLK,
-	GPIO95_RX_ER,
-	GPIO96_RX_DQ3,
-	GPIO97_RX_DQ2,
-	GPIO98_RX_DQ1,
-	GPIO99_RX_DQ0,
-	GPIO100_MII_MDC,
-	GPIO101_MII_MDIO,
-	GPIO103_RX_DV,
-	GPIO104_GPIO,     /* Reset PHY */
-
-	/* RTC interrupt */
-	GPIO102_GPIO,
-
-	/* I2C */
-	GPIO105_CI2C_SDA,
-	GPIO106_CI2C_SCL,
-
-	/* SPI NOR Flash on SSP2 */
-	GPIO107_SSP2_RXD,
-	GPIO108_SSP2_TXD,
-	GPIO110_GPIO,     /* SPI_CSn */
-	GPIO111_SSP2_CLK,
-
-	/* Select JTAG */
-	GPIO109_GPIO,
-
-	/* I2S */
-	GPIO114_I2S_FRM,
-	GPIO115_I2S_BCLK,
-	GPIO116_I2S_TXD
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct i2c_board_info gplugd_i2c_board_info[] = {
-	{
-		.type = "isl1208",
-		.addr = 0x6F,
-	}
-};
-
-/* Bring PHY out of reset by setting GPIO 104 */
-static int gplugd_eth_init(void)
-{
-	if (unlikely(gpio_request(104, "ETH_RESET_N"))) {
-		printk(KERN_ERR "Can't get hold of GPIO 104 to bring Ethernet "
-				"PHY out of reset\n");
-		return -EIO;
-	}
-
-	gpio_direction_output(104, 1);
-	gpio_free(104);
-	return 0;
-}
-
-struct pxa168_eth_platform_data gplugd_eth_platform_data = {
-	.port_number = 0,
-	.phy_addr    = 0,
-	.speed       = 0, /* Autonagotiation */
-	.intf        = PHY_INTERFACE_MODE_RMII,
-	.init        = gplugd_eth_init,
-};
-
-static void __init select_disp_freq(void)
-{
-	/* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */
-	if (unlikely(gpio_request(35, "DISP_FREQ_SEL"))) {
-		printk(KERN_ERR "Can't get hold of GPIO 35 to select display "
-				"frequency\n");
-	} else {
-		gpio_direction_output(35, 1);
-		gpio_free(35);
-	}
-
-	if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) {
-		printk(KERN_ERR "Can't get hold of GPIO 85 to select display "
-				"frequency\n");
-	} else {
-		gpio_direction_output(85, 0);
-		gpio_free(85);
-	}
-}
-
-static void __init gplugd_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(gplugd_pin_config));
-
-	select_disp_freq();
-
-	/* on-chip devices */
-	pxa168_add_uart(3);
-	pxa168_add_ssp(1);
-	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
-	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa168_device_gpio);
-
-	pxa168_add_eth(&gplugd_eth_platform_data);
-}
-
-MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = gplugd_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/irqs.h b/arch/arm/mach-mmp/irqs.h
deleted file mode 100644
index 5acc4d532a43..000000000000
--- a/arch/arm/mach-mmp/irqs.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_IRQS_H
-#define __ASM_MACH_IRQS_H
-
-/*
- * Interrupt numbers for PXA168
- */
-#define IRQ_PXA168_NONE			(-1)
-#define IRQ_PXA168_SSP4			0
-#define IRQ_PXA168_SSP3			1
-#define IRQ_PXA168_SSP2			2
-#define IRQ_PXA168_SSP1			3
-#define IRQ_PXA168_PMIC_INT		4
-#define IRQ_PXA168_RTC_INT		5
-#define IRQ_PXA168_RTC_ALARM		6
-#define IRQ_PXA168_TWSI0		7
-#define IRQ_PXA168_GPU			8
-#define IRQ_PXA168_KEYPAD		9
-#define IRQ_PXA168_ONEWIRE		12
-#define IRQ_PXA168_TIMER1		13
-#define IRQ_PXA168_TIMER2		14
-#define IRQ_PXA168_TIMER3		15
-#define IRQ_PXA168_CMU			16
-#define IRQ_PXA168_SSP5			17
-#define IRQ_PXA168_MSP_WAKEUP		19
-#define IRQ_PXA168_CF_WAKEUP		20
-#define IRQ_PXA168_XD_WAKEUP		21
-#define IRQ_PXA168_MFU			22
-#define IRQ_PXA168_MSP			23
-#define IRQ_PXA168_CF			24
-#define IRQ_PXA168_XD			25
-#define IRQ_PXA168_DDR_INT		26
-#define IRQ_PXA168_UART1		27
-#define IRQ_PXA168_UART2		28
-#define IRQ_PXA168_UART3		29
-#define IRQ_PXA168_WDT			35
-#define IRQ_PXA168_MAIN_PMU		36
-#define IRQ_PXA168_FRQ_CHANGE		38
-#define IRQ_PXA168_SDH1			39
-#define IRQ_PXA168_SDH2			40
-#define IRQ_PXA168_LCD			41
-#define IRQ_PXA168_CI			42
-#define IRQ_PXA168_USB1			44
-#define IRQ_PXA168_NAND			45
-#define IRQ_PXA168_HIFI_DMA		46
-#define IRQ_PXA168_DMA_INT0		47
-#define IRQ_PXA168_DMA_INT1		48
-#define IRQ_PXA168_GPIOX		49
-#define IRQ_PXA168_USB2			51
-#define IRQ_PXA168_AC97			57
-#define IRQ_PXA168_TWSI1		58
-#define IRQ_PXA168_AP_PMU		60
-#define IRQ_PXA168_SM_INT		63
-
-/*
- * Interrupt numbers for PXA910
- */
-#define IRQ_PXA910_NONE			(-1)
-#define IRQ_PXA910_AIRQ			0
-#define IRQ_PXA910_SSP3			1
-#define IRQ_PXA910_SSP2			2
-#define IRQ_PXA910_SSP1			3
-#define IRQ_PXA910_PMIC_INT		4
-#define IRQ_PXA910_RTC_INT		5
-#define IRQ_PXA910_RTC_ALARM		6
-#define IRQ_PXA910_TWSI0		7
-#define IRQ_PXA910_GPU			8
-#define IRQ_PXA910_KEYPAD		9
-#define IRQ_PXA910_ROTARY		10
-#define IRQ_PXA910_TRACKBALL		11
-#define IRQ_PXA910_ONEWIRE		12
-#define IRQ_PXA910_AP1_TIMER1		13
-#define IRQ_PXA910_AP1_TIMER2		14
-#define IRQ_PXA910_AP1_TIMER3		15
-#define IRQ_PXA910_IPC_AP0		16
-#define IRQ_PXA910_IPC_AP1		17
-#define IRQ_PXA910_IPC_AP2		18
-#define IRQ_PXA910_IPC_AP3		19
-#define IRQ_PXA910_IPC_AP4		20
-#define IRQ_PXA910_IPC_CP0		21
-#define IRQ_PXA910_IPC_CP1		22
-#define IRQ_PXA910_IPC_CP2		23
-#define IRQ_PXA910_IPC_CP3		24
-#define IRQ_PXA910_IPC_CP4		25
-#define IRQ_PXA910_L2_DDR		26
-#define IRQ_PXA910_UART2		27
-#define IRQ_PXA910_UART3		28
-#define IRQ_PXA910_AP2_TIMER1		29
-#define IRQ_PXA910_AP2_TIMER2		30
-#define IRQ_PXA910_CP2_TIMER1		31
-#define IRQ_PXA910_CP2_TIMER2		32
-#define IRQ_PXA910_CP2_TIMER3		33
-#define IRQ_PXA910_GSSP			34
-#define IRQ_PXA910_CP2_WDT		35
-#define IRQ_PXA910_MAIN_PMU		36
-#define IRQ_PXA910_CP_FREQ_CHG		37
-#define IRQ_PXA910_AP_FREQ_CHG		38
-#define IRQ_PXA910_MMC			39
-#define IRQ_PXA910_AEU			40
-#define IRQ_PXA910_LCD			41
-#define IRQ_PXA910_CCIC			42
-#define IRQ_PXA910_IRE			43
-#define IRQ_PXA910_USB1			44
-#define IRQ_PXA910_NAND			45
-#define IRQ_PXA910_HIFI_DMA		46
-#define IRQ_PXA910_DMA_INT0		47
-#define IRQ_PXA910_DMA_INT1		48
-#define IRQ_PXA910_AP_GPIO		49
-#define IRQ_PXA910_AP2_TIMER3		50
-#define IRQ_PXA910_USB2			51
-#define IRQ_PXA910_TWSI1		54
-#define IRQ_PXA910_CP_GPIO		55
-#define IRQ_PXA910_UART1		59	/* Slow UART */
-#define IRQ_PXA910_AP_PMU		60
-#define IRQ_PXA910_SM_INT		63	/* from PinMux */
-
-/*
- * Interrupt numbers for MMP2
- */
-#define IRQ_MMP2_NONE			(-1)
-#define IRQ_MMP2_SSP1			0
-#define IRQ_MMP2_SSP2			1
-#define IRQ_MMP2_SSPA1			2
-#define IRQ_MMP2_SSPA2			3
-#define IRQ_MMP2_PMIC_MUX		4	/* PMIC & Charger */
-#define IRQ_MMP2_RTC_MUX		5
-#define IRQ_MMP2_TWSI1			7
-#define IRQ_MMP2_GPU			8
-#define IRQ_MMP2_KEYPAD_MUX		9
-#define IRQ_MMP2_ROTARY			10
-#define IRQ_MMP2_TRACKBALL		11
-#define IRQ_MMP2_ONEWIRE		12
-#define IRQ_MMP2_TIMER1			13
-#define IRQ_MMP2_TIMER2			14
-#define IRQ_MMP2_TIMER3			15
-#define IRQ_MMP2_RIPC			16
-#define IRQ_MMP2_TWSI_MUX		17	/* TWSI2 ~ TWSI6 */
-#define IRQ_MMP2_HDMI			19
-#define IRQ_MMP2_SSP3			20
-#define IRQ_MMP2_SSP4			21
-#define IRQ_MMP2_USB_HS1		22
-#define IRQ_MMP2_USB_HS2		23
-#define IRQ_MMP2_UART3			24
-#define IRQ_MMP2_UART1			27
-#define IRQ_MMP2_UART2			28
-#define IRQ_MMP2_MIPI_DSI		29
-#define IRQ_MMP2_CI2			30
-#define IRQ_MMP2_PMU_TIMER1		31
-#define IRQ_MMP2_PMU_TIMER2		32
-#define IRQ_MMP2_PMU_TIMER3		33
-#define IRQ_MMP2_USB_FS			34
-#define IRQ_MMP2_MISC_MUX		35
-#define IRQ_MMP2_WDT1			36
-#define IRQ_MMP2_NAND_DMA		37
-#define IRQ_MMP2_USIM			38
-#define IRQ_MMP2_MMC			39
-#define IRQ_MMP2_WTM			40
-#define IRQ_MMP2_LCD			41
-#define IRQ_MMP2_CI			42
-#define IRQ_MMP2_IRE			43
-#define IRQ_MMP2_USB_OTG		44
-#define IRQ_MMP2_NAND			45
-#define IRQ_MMP2_UART4			46
-#define IRQ_MMP2_DMA_FIQ		47
-#define IRQ_MMP2_DMA_RIQ		48
-#define IRQ_MMP2_GPIO			49
-#define IRQ_MMP2_MIPI_HSI1_MUX		51
-#define IRQ_MMP2_MMC2			52
-#define IRQ_MMP2_MMC3			53
-#define IRQ_MMP2_MMC4			54
-#define IRQ_MMP2_MIPI_HSI0_MUX		55
-#define IRQ_MMP2_MSP			58
-#define IRQ_MMP2_MIPI_SLIM_DMA		59
-#define IRQ_MMP2_PJ4_FREQ_CHG		60
-#define IRQ_MMP2_MIPI_SLIM		62
-#define IRQ_MMP2_SM			63
-
-#define IRQ_MMP2_MUX_BASE		64
-
-/* secondary interrupt of INT #4 */
-#define IRQ_MMP2_PMIC_BASE		(IRQ_MMP2_MUX_BASE)
-#define IRQ_MMP2_CHARGER		(IRQ_MMP2_PMIC_BASE + 0)
-#define IRQ_MMP2_PMIC			(IRQ_MMP2_PMIC_BASE + 1)
-
-/* secondary interrupt of INT #5 */
-#define IRQ_MMP2_RTC_BASE		(IRQ_MMP2_PMIC_BASE + 2)
-#define IRQ_MMP2_RTC_ALARM		(IRQ_MMP2_RTC_BASE + 0)
-#define IRQ_MMP2_RTC			(IRQ_MMP2_RTC_BASE + 1)
-
-/* secondary interrupt of INT #9 */
-#define IRQ_MMP2_KEYPAD_BASE		(IRQ_MMP2_RTC_BASE + 2)
-#define IRQ_MMP2_KPC			(IRQ_MMP2_KEYPAD_BASE + 0)
-#define IRQ_MMP2_ROTORY			(IRQ_MMP2_KEYPAD_BASE + 1)
-#define IRQ_MMP2_TBALL			(IRQ_MMP2_KEYPAD_BASE + 2)
-
-/* secondary interrupt of INT #17 */
-#define IRQ_MMP2_TWSI_BASE		(IRQ_MMP2_KEYPAD_BASE + 3)
-#define IRQ_MMP2_TWSI2			(IRQ_MMP2_TWSI_BASE + 0)
-#define IRQ_MMP2_TWSI3			(IRQ_MMP2_TWSI_BASE + 1)
-#define IRQ_MMP2_TWSI4			(IRQ_MMP2_TWSI_BASE + 2)
-#define IRQ_MMP2_TWSI5			(IRQ_MMP2_TWSI_BASE + 3)
-#define IRQ_MMP2_TWSI6			(IRQ_MMP2_TWSI_BASE + 4)
-
-/* secondary interrupt of INT #35 */
-#define IRQ_MMP2_MISC_BASE		(IRQ_MMP2_TWSI_BASE + 5)
-#define IRQ_MMP2_PERF			(IRQ_MMP2_MISC_BASE + 0)
-#define IRQ_MMP2_L2_PA_ECC		(IRQ_MMP2_MISC_BASE + 1)
-#define IRQ_MMP2_L2_ECC			(IRQ_MMP2_MISC_BASE + 2)
-#define IRQ_MMP2_L2_UECC		(IRQ_MMP2_MISC_BASE + 3)
-#define IRQ_MMP2_DDR			(IRQ_MMP2_MISC_BASE + 4)
-#define IRQ_MMP2_FAB0_TIMEOUT		(IRQ_MMP2_MISC_BASE + 5)
-#define IRQ_MMP2_FAB1_TIMEOUT		(IRQ_MMP2_MISC_BASE + 6)
-#define IRQ_MMP2_FAB2_TIMEOUT		(IRQ_MMP2_MISC_BASE + 7)
-#define IRQ_MMP2_THERMAL		(IRQ_MMP2_MISC_BASE + 9)
-#define IRQ_MMP2_MAIN_PMU		(IRQ_MMP2_MISC_BASE + 10)
-#define IRQ_MMP2_WDT2			(IRQ_MMP2_MISC_BASE + 11)
-#define IRQ_MMP2_CORESIGHT		(IRQ_MMP2_MISC_BASE + 12)
-#define IRQ_MMP2_COMMTX			(IRQ_MMP2_MISC_BASE + 13)
-#define IRQ_MMP2_COMMRX			(IRQ_MMP2_MISC_BASE + 14)
-
-/* secondary interrupt of INT #51 */
-#define IRQ_MMP2_MIPI_HSI1_BASE		(IRQ_MMP2_MISC_BASE + 15)
-#define IRQ_MMP2_HSI1_CAWAKE		(IRQ_MMP2_MIPI_HSI1_BASE + 0)
-#define IRQ_MMP2_MIPI_HSI_INT1		(IRQ_MMP2_MIPI_HSI1_BASE + 1)
-
-/* secondary interrupt of INT #55 */
-#define IRQ_MMP2_MIPI_HSI0_BASE		(IRQ_MMP2_MIPI_HSI1_BASE + 2)
-#define IRQ_MMP2_HSI0_CAWAKE		(IRQ_MMP2_MIPI_HSI0_BASE + 0)
-#define IRQ_MMP2_MIPI_HSI_INT0		(IRQ_MMP2_MIPI_HSI0_BASE + 1)
-
-#define IRQ_MMP2_MUX_END		(IRQ_MMP2_MIPI_HSI0_BASE + 2)
-
-#define IRQ_GPIO_START			128
-#define MMP_NR_BUILTIN_GPIO		192
-#define MMP_GPIO_TO_IRQ(gpio)		(IRQ_GPIO_START + (gpio))
-
-#define IRQ_BOARD_START			(IRQ_GPIO_START + MMP_NR_BUILTIN_GPIO)
-#define MMP_NR_IRQS			IRQ_BOARD_START
-
-#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
deleted file mode 100644
index 2578e176fd48..000000000000
--- a/arch/arm/mach-mmp/jasper.c
+++ /dev/null
@@ -1,185 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/jasper.c
- *
- *  Support for the Marvell Jasper Development Platform.
- *
- *  Copyright (C) 2009-2010 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio-pxa.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max8649.h>
-#include <linux/mfd/max8925.h>
-#include <linux/interrupt.h>
-
-#include "irqs.h"
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-mmp2.h"
-#include "mmp2.h"
-
-#include "common.h"
-
-#define JASPER_NR_IRQS		(MMP_NR_IRQS + 48)
-
-static unsigned long jasper_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO29_UART1_RXD,
-	GPIO30_UART1_TXD,
-
-	/* UART3 */
-	GPIO51_UART3_RXD,
-	GPIO52_UART3_TXD,
-
-	/* DFI */
-	GPIO168_DFI_D0,
-	GPIO167_DFI_D1,
-	GPIO166_DFI_D2,
-	GPIO165_DFI_D3,
-	GPIO107_DFI_D4,
-	GPIO106_DFI_D5,
-	GPIO105_DFI_D6,
-	GPIO104_DFI_D7,
-	GPIO111_DFI_D8,
-	GPIO164_DFI_D9,
-	GPIO163_DFI_D10,
-	GPIO162_DFI_D11,
-	GPIO161_DFI_D12,
-	GPIO110_DFI_D13,
-	GPIO109_DFI_D14,
-	GPIO108_DFI_D15,
-	GPIO143_ND_nCS0,
-	GPIO144_ND_nCS1,
-	GPIO147_ND_nWE,
-	GPIO148_ND_nRE,
-	GPIO150_ND_ALE,
-	GPIO149_ND_CLE,
-	GPIO112_ND_RDY0,
-	GPIO160_ND_RDY1,
-
-	/* PMIC */
-	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
-
-	/* MMC1 */
-	GPIO131_MMC1_DAT3,
-	GPIO132_MMC1_DAT2,
-	GPIO133_MMC1_DAT1,
-	GPIO134_MMC1_DAT0,
-	GPIO136_MMC1_CMD,
-	GPIO139_MMC1_CLK,
-	GPIO140_MMC1_CD,
-	GPIO141_MMC1_WP,
-
-	/* MMC2 */
-	GPIO37_MMC2_DAT3,
-	GPIO38_MMC2_DAT2,
-	GPIO39_MMC2_DAT1,
-	GPIO40_MMC2_DAT0,
-	GPIO41_MMC2_CMD,
-	GPIO42_MMC2_CLK,
-
-	/* MMC3 */
-	GPIO165_MMC3_DAT7,
-	GPIO162_MMC3_DAT6,
-	GPIO166_MMC3_DAT5,
-	GPIO163_MMC3_DAT4,
-	GPIO167_MMC3_DAT3,
-	GPIO164_MMC3_DAT2,
-	GPIO168_MMC3_DAT1,
-	GPIO111_MMC3_DAT0,
-	GPIO112_MMC3_CMD,
-	GPIO151_MMC3_CLK,
-};
-
-static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct regulator_consumer_supply max8649_supply[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data max8649_init_data = {
-	.constraints	= {
-		.name		= "vcc_core range",
-		.min_uV		= 1150000,
-		.max_uV		= 1280000,
-		.always_on	= 1,
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8649_supply[0],
-};
-
-static struct max8649_platform_data jasper_max8649_info = {
-	.mode		= 2,	/* VID1 = 1, VID0 = 0 */
-	.extclk		= 0,
-	.ramp_timing	= MAX8649_RAMP_32MV,
-	.regulator	= &max8649_init_data,
-};
-
-static struct max8925_backlight_pdata jasper_backlight_data = {
-	.dual_string	= 0,
-};
-
-static struct max8925_power_pdata jasper_power_data = {
-	.batt_detect		= 0,	/* can't detect battery by ID pin */
-	.topoff_threshold	= MAX8925_TOPOFF_THR_10PER,
-	.fast_charge		= MAX8925_FCHG_1000MA,
-};
-
-static struct max8925_platform_data jasper_max8925_info = {
-	.backlight		= &jasper_backlight_data,
-	.power			= &jasper_power_data,
-	.irq_base		= MMP_NR_IRQS,
-};
-
-static struct i2c_board_info jasper_twsi1_info[] = {
-	[0] = {
-		.type		= "max8649",
-		.addr		= 0x60,
-		.platform_data	= &jasper_max8649_info,
-	},
-	[1] = {
-		.type		= "max8925",
-		.addr		= 0x3c,
-		.irq		= IRQ_MMP2_PMIC,
-		.platform_data	= &jasper_max8925_info,
-	},
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
-	.clk_delay_cycles = 0x1f,
-};
-
-static void __init jasper_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
-
-	/* on-chip devices */
-	mmp2_add_uart(1);
-	mmp2_add_uart(3);
-	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
-	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&mmp2_device_gpio);
-	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
-
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= JASPER_NR_IRQS,
-	.init_irq       = mmp2_init_irq,
-	.init_time	= mmp2_timer_init,
-	.init_machine   = jasper_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/mfp-mmp2.h b/arch/arm/mach-mmp/mfp-mmp2.h
deleted file mode 100644
index 1620222981e3..000000000000
--- a/arch/arm/mach-mmp/mfp-mmp2.h
+++ /dev/null
@@ -1,396 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_MMP2_H
-#define __ASM_MACH_MFP_MMP2_H
-
-#include "mfp.h"
-
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x2 << 13)
-#define MFP_DRIVE_MEDIUM	(0x4 << 13)
-#define MFP_DRIVE_FAST		(0x6 << 13)
-
-/* GPIO */
-#define GPIO0_GPIO	MFP_CFG(GPIO0, AF0)
-#define GPIO1_GPIO	MFP_CFG(GPIO1, AF0)
-#define GPIO2_GPIO	MFP_CFG(GPIO2, AF0)
-#define GPIO3_GPIO	MFP_CFG(GPIO3, AF0)
-#define GPIO4_GPIO	MFP_CFG(GPIO4, AF0)
-#define GPIO5_GPIO	MFP_CFG(GPIO5, AF0)
-#define GPIO6_GPIO	MFP_CFG(GPIO6, AF0)
-#define GPIO7_GPIO	MFP_CFG(GPIO7, AF0)
-#define GPIO8_GPIO	MFP_CFG(GPIO8, AF0)
-#define GPIO9_GPIO	MFP_CFG(GPIO9, AF0)
-#define GPIO10_GPIO	MFP_CFG(GPIO10, AF0)
-#define GPIO11_GPIO	MFP_CFG(GPIO11, AF0)
-#define GPIO12_GPIO	MFP_CFG(GPIO12, AF0)
-#define GPIO13_GPIO	MFP_CFG(GPIO13, AF0)
-#define GPIO14_GPIO	MFP_CFG(GPIO14, AF0)
-#define GPIO15_GPIO	MFP_CFG(GPIO15, AF0)
-#define GPIO16_GPIO	MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO	MFP_CFG(GPIO17, AF0)
-#define GPIO18_GPIO	MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO	MFP_CFG(GPIO19, AF0)
-#define GPIO20_GPIO	MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO	MFP_CFG(GPIO21, AF0)
-#define GPIO22_GPIO	MFP_CFG(GPIO22, AF0)
-#define GPIO23_GPIO	MFP_CFG(GPIO23, AF0)
-#define GPIO24_GPIO	MFP_CFG(GPIO24, AF0)
-#define GPIO25_GPIO	MFP_CFG(GPIO25, AF0)
-#define GPIO26_GPIO	MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO	MFP_CFG(GPIO27, AF0)
-#define GPIO28_GPIO	MFP_CFG(GPIO28, AF0)
-#define GPIO29_GPIO	MFP_CFG(GPIO29, AF0)
-#define GPIO30_GPIO	MFP_CFG(GPIO30, AF0)
-#define GPIO31_GPIO	MFP_CFG(GPIO31, AF0)
-#define GPIO32_GPIO	MFP_CFG(GPIO32, AF0)
-#define GPIO33_GPIO	MFP_CFG(GPIO33, AF0)
-#define GPIO34_GPIO	MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO	MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO	MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO	MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO	MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO	MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO	MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO	MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO	MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO	MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO	MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO	MFP_CFG(GPIO45, AF0)
-#define GPIO46_GPIO	MFP_CFG(GPIO46, AF0)
-#define GPIO47_GPIO	MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO	MFP_CFG(GPIO48, AF0)
-#define GPIO49_GPIO	MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO	MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO	MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO	MFP_CFG(GPIO52, AF0)
-#define GPIO53_GPIO	MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO	MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO	MFP_CFG(GPIO55, AF0)
-#define GPIO56_GPIO	MFP_CFG(GPIO56, AF0)
-#define GPIO57_GPIO	MFP_CFG(GPIO57, AF0)
-#define GPIO58_GPIO	MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO	MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO	MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO	MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO	MFP_CFG(GPIO62, AF0)
-#define GPIO63_GPIO	MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO	MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO	MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO	MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO	MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO	MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO	MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO	MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO	MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO	MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO	MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO	MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO	MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO	MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO	MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO	MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO	MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO	MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO	MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO	MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO	MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO	MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO	MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO	MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO	MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO	MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO	MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO	MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO	MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO	MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO	MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO	MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO	MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO	MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO	MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO	MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO	MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO	MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO	MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO	MFP_CFG(GPIO102, AF1)
-#define GPIO103_GPIO	MFP_CFG(GPIO103, AF1)
-#define GPIO104_GPIO	MFP_CFG(GPIO104, AF1)
-#define GPIO105_GPIO	MFP_CFG(GPIO105, AF1)
-#define GPIO106_GPIO	MFP_CFG(GPIO106, AF1)
-#define GPIO107_GPIO	MFP_CFG(GPIO107, AF1)
-#define GPIO108_GPIO	MFP_CFG(GPIO108, AF1)
-#define GPIO109_GPIO	MFP_CFG(GPIO109, AF1)
-#define GPIO110_GPIO	MFP_CFG(GPIO110, AF1)
-#define GPIO111_GPIO	MFP_CFG(GPIO111, AF1)
-#define GPIO112_GPIO	MFP_CFG(GPIO112, AF1)
-#define GPIO113_GPIO	MFP_CFG(GPIO113, AF1)
-#define GPIO114_GPIO	MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO	MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO	MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO	MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO	MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO	MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO	MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO	MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO	MFP_CFG(GPIO122, AF0)
-#define GPIO123_GPIO	MFP_CFG(GPIO123, AF0)
-#define GPIO124_GPIO	MFP_CFG(GPIO124, AF0)
-#define GPIO125_GPIO	MFP_CFG(GPIO125, AF0)
-#define GPIO126_GPIO	MFP_CFG(GPIO126, AF0)
-#define GPIO127_GPIO	MFP_CFG(GPIO127, AF0)
-#define GPIO128_GPIO	MFP_CFG(GPIO128, AF0)
-#define GPIO129_GPIO	MFP_CFG(GPIO129, AF0)
-#define GPIO130_GPIO	MFP_CFG(GPIO130, AF0)
-#define GPIO131_GPIO	MFP_CFG(GPIO131, AF0)
-#define GPIO132_GPIO	MFP_CFG(GPIO132, AF0)
-#define GPIO133_GPIO	MFP_CFG(GPIO133, AF0)
-#define GPIO134_GPIO	MFP_CFG(GPIO134, AF0)
-#define GPIO135_GPIO	MFP_CFG(GPIO135, AF0)
-#define GPIO136_GPIO	MFP_CFG(GPIO136, AF0)
-#define GPIO137_GPIO	MFP_CFG(GPIO137, AF0)
-#define GPIO138_GPIO	MFP_CFG(GPIO138, AF0)
-#define GPIO139_GPIO	MFP_CFG(GPIO139, AF0)
-#define GPIO140_GPIO	MFP_CFG(GPIO140, AF0)
-#define GPIO141_GPIO	MFP_CFG(GPIO141, AF0)
-#define GPIO142_GPIO	MFP_CFG(GPIO142, AF1)
-#define GPIO143_GPIO	MFP_CFG(GPIO143, AF1)
-#define GPIO144_GPIO	MFP_CFG(GPIO144, AF1)
-#define GPIO145_GPIO	MFP_CFG(GPIO145, AF1)
-#define GPIO146_GPIO	MFP_CFG(GPIO146, AF1)
-#define GPIO147_GPIO	MFP_CFG(GPIO147, AF1)
-#define GPIO148_GPIO	MFP_CFG(GPIO148, AF1)
-#define GPIO149_GPIO	MFP_CFG(GPIO149, AF1)
-#define GPIO150_GPIO	MFP_CFG(GPIO150, AF1)
-#define GPIO151_GPIO	MFP_CFG(GPIO151, AF1)
-#define GPIO152_GPIO	MFP_CFG(GPIO152, AF1)
-#define GPIO153_GPIO	MFP_CFG(GPIO153, AF1)
-#define GPIO154_GPIO	MFP_CFG(GPIO154, AF1)
-#define GPIO155_GPIO	MFP_CFG(GPIO155, AF1)
-#define GPIO156_GPIO	MFP_CFG(GPIO156, AF1)
-#define GPIO157_GPIO	MFP_CFG(GPIO157, AF1)
-#define GPIO158_GPIO	MFP_CFG(GPIO158, AF1)
-#define GPIO159_GPIO	MFP_CFG(GPIO159, AF1)
-#define GPIO160_GPIO	MFP_CFG(GPIO160, AF1)
-#define GPIO161_GPIO	MFP_CFG(GPIO161, AF1)
-#define GPIO162_GPIO	MFP_CFG(GPIO162, AF1)
-#define GPIO163_GPIO	MFP_CFG(GPIO163, AF1)
-#define GPIO164_GPIO	MFP_CFG(GPIO164, AF1)
-#define GPIO165_GPIO	MFP_CFG(GPIO165, AF1)
-#define GPIO166_GPIO	MFP_CFG(GPIO166, AF1)
-#define GPIO167_GPIO	MFP_CFG(GPIO167, AF1)
-#define GPIO168_GPIO	MFP_CFG(GPIO168, AF1)
-
-/* DFI */
-#define GPIO108_DFI_D15		MFP_CFG(GPIO108, AF0)
-#define GPIO109_DFI_D14		MFP_CFG(GPIO109, AF0)
-#define GPIO110_DFI_D13		MFP_CFG(GPIO110, AF0)
-#define GPIO161_DFI_D12		MFP_CFG(GPIO161, AF0)
-#define GPIO162_DFI_D11		MFP_CFG(GPIO162, AF0)
-#define GPIO163_DFI_D10		MFP_CFG(GPIO163, AF0)
-#define GPIO164_DFI_D9		MFP_CFG(GPIO164, AF0)
-#define GPIO111_DFI_D8		MFP_CFG(GPIO111, AF0)
-#define GPIO104_DFI_D7		MFP_CFG(GPIO104, AF0)
-#define GPIO105_DFI_D6		MFP_CFG(GPIO105, AF0)
-#define GPIO106_DFI_D5		MFP_CFG(GPIO106, AF0)
-#define GPIO107_DFI_D4		MFP_CFG(GPIO107, AF0)
-#define GPIO165_DFI_D3		MFP_CFG(GPIO165, AF0)
-#define GPIO166_DFI_D2		MFP_CFG(GPIO166, AF0)
-#define GPIO167_DFI_D1		MFP_CFG(GPIO167, AF0)
-#define GPIO168_DFI_D0		MFP_CFG(GPIO168, AF0)
-#define GPIO143_ND_nCS0		MFP_CFG(GPIO143, AF0)
-#define GPIO144_ND_nCS1		MFP_CFG(GPIO144, AF0)
-#define GPIO147_ND_nWE		MFP_CFG(GPIO147, AF0)
-#define GPIO148_ND_nRE		MFP_CFG(GPIO148, AF0)
-#define GPIO150_ND_ALE		MFP_CFG(GPIO150, AF0)
-#define GPIO149_ND_CLE		MFP_CFG(GPIO149, AF0)
-#define GPIO112_ND_RDY0		MFP_CFG(GPIO112, AF0)
-#define GPIO160_ND_RDY1		MFP_CFG(GPIO160, AF0)
-
-/* Static Memory Controller */
-#define GPIO145_SMC_nCS0	MFP_CFG(GPIO145, AF0)
-#define GPIO146_SMC_nCS1	MFP_CFG(GPIO146, AF0)
-#define GPIO152_SMC_BE0		MFP_CFG(GPIO152, AF0)
-#define GPIO153_SMC_BE1		MFP_CFG(GPIO153, AF0)
-#define GPIO154_SMC_IRQ		MFP_CFG(GPIO154, AF0)
-#define GPIO113_SMC_RDY		MFP_CFG(GPIO113, AF0)
-#define GPIO151_SMC_SCLK	MFP_CFG(GPIO151, AF0)
-
-/* Ethernet */
-#define GPIO155_SM_ADVMUX	MFP_CFG(GPIO155, AF2)
-
-/* UART1 */
-#define GPIO45_UART1_RXD	MFP_CFG(GPIO45, AF1)
-#define GPIO46_UART1_TXD	MFP_CFG(GPIO46, AF1)
-#define GPIO29_UART1_RXD	MFP_CFG(GPIO29, AF1)
-#define GPIO30_UART1_TXD	MFP_CFG(GPIO30, AF1)
-#define GPIO31_UART1_CTS	MFP_CFG(GPIO31, AF1)
-#define GPIO32_UART1_RTS	MFP_CFG(GPIO32, AF1)
-
-/* UART2 */
-#define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF1)
-#define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF1)
-#define GPIO49_UART2_CTS	MFP_CFG(GPIO49, AF1)
-#define GPIO50_UART2_RTS	MFP_CFG(GPIO50, AF1)
-
-/* UART3 */
-#define GPIO51_UART3_RXD	MFP_CFG(GPIO51, AF1)
-#define GPIO52_UART3_TXD	MFP_CFG(GPIO52, AF1)
-#define GPIO53_UART3_CTS	MFP_CFG(GPIO53, AF1)
-#define GPIO54_UART3_RTS	MFP_CFG(GPIO54, AF1)
-
-/* MMC1 */
-#define GPIO124_MMC1_DAT7	MFP_CFG_DRV(GPIO124, AF1, FAST)
-#define GPIO125_MMC1_DAT6	MFP_CFG_DRV(GPIO125, AF1, FAST)
-#define GPIO129_MMC1_DAT5	MFP_CFG_DRV(GPIO129, AF1, FAST)
-#define GPIO130_MMC1_DAT4	MFP_CFG_DRV(GPIO130, AF1, FAST)
-#define GPIO131_MMC1_DAT3	MFP_CFG_DRV(GPIO131, AF1, FAST)
-#define GPIO132_MMC1_DAT2	MFP_CFG_DRV(GPIO132, AF1, FAST)
-#define GPIO133_MMC1_DAT1	MFP_CFG_DRV(GPIO133, AF1, FAST)
-#define GPIO134_MMC1_DAT0	MFP_CFG_DRV(GPIO134, AF1, FAST)
-#define GPIO136_MMC1_CMD	MFP_CFG_DRV(GPIO136, AF1, FAST)
-#define GPIO139_MMC1_CLK	MFP_CFG_DRV(GPIO139, AF1, FAST)
-#define GPIO140_MMC1_CD		MFP_CFG_DRV(GPIO140, AF1, FAST)
-#define GPIO141_MMC1_WP		MFP_CFG_DRV(GPIO141, AF1, FAST)
-
-/*MMC2*/
-#define GPIO37_MMC2_DAT3	MFP_CFG_DRV(GPIO37, AF1, FAST)
-#define GPIO38_MMC2_DAT2	MFP_CFG_DRV(GPIO38, AF1, FAST)
-#define GPIO39_MMC2_DAT1	MFP_CFG_DRV(GPIO39, AF1, FAST)
-#define GPIO40_MMC2_DAT0	MFP_CFG_DRV(GPIO40, AF1, FAST)
-#define GPIO41_MMC2_CMD		MFP_CFG_DRV(GPIO41, AF1, FAST)
-#define GPIO42_MMC2_CLK		MFP_CFG_DRV(GPIO42, AF1, FAST)
-
-/*MMC3*/
-#define GPIO165_MMC3_DAT7	MFP_CFG_DRV(GPIO165, AF2, FAST)
-#define GPIO162_MMC3_DAT6	MFP_CFG_DRV(GPIO162, AF2, FAST)
-#define GPIO166_MMC3_DAT5	MFP_CFG_DRV(GPIO166, AF2, FAST)
-#define GPIO163_MMC3_DAT4	MFP_CFG_DRV(GPIO163, AF2, FAST)
-#define GPIO167_MMC3_DAT3	MFP_CFG_DRV(GPIO167, AF2, FAST)
-#define GPIO164_MMC3_DAT2	MFP_CFG_DRV(GPIO164, AF2, FAST)
-#define GPIO168_MMC3_DAT1	MFP_CFG_DRV(GPIO168, AF2, FAST)
-#define GPIO111_MMC3_DAT0	MFP_CFG_DRV(GPIO111, AF2, FAST)
-#define GPIO112_MMC3_CMD	MFP_CFG_DRV(GPIO112, AF2, FAST)
-#define GPIO151_MMC3_CLK	MFP_CFG_DRV(GPIO151, AF2, FAST)
-
-/* LCD */
-#define GPIO74_LCD_FCLK		MFP_CFG_DRV(GPIO74, AF1, FAST)
-#define GPIO75_LCD_LCLK		MFP_CFG_DRV(GPIO75, AF1, FAST)
-#define GPIO76_LCD_PCLK		MFP_CFG_DRV(GPIO76, AF1, FAST)
-#define GPIO77_LCD_DENA		MFP_CFG_DRV(GPIO77, AF1, FAST)
-#define GPIO78_LCD_DD0		MFP_CFG_DRV(GPIO78, AF1, FAST)
-#define GPIO79_LCD_DD1		MFP_CFG_DRV(GPIO79, AF1, FAST)
-#define GPIO80_LCD_DD2		MFP_CFG_DRV(GPIO80, AF1, FAST)
-#define GPIO81_LCD_DD3		MFP_CFG_DRV(GPIO81, AF1, FAST)
-#define GPIO82_LCD_DD4		MFP_CFG_DRV(GPIO82, AF1, FAST)
-#define GPIO83_LCD_DD5		MFP_CFG_DRV(GPIO83, AF1, FAST)
-#define GPIO84_LCD_DD6		MFP_CFG_DRV(GPIO84, AF1, FAST)
-#define GPIO85_LCD_DD7		MFP_CFG_DRV(GPIO85, AF1, FAST)
-#define GPIO86_LCD_DD8		MFP_CFG_DRV(GPIO86, AF1, FAST)
-#define GPIO87_LCD_DD9		MFP_CFG_DRV(GPIO87, AF1, FAST)
-#define GPIO88_LCD_DD10		MFP_CFG_DRV(GPIO88, AF1, FAST)
-#define GPIO89_LCD_DD11		MFP_CFG_DRV(GPIO89, AF1, FAST)
-#define GPIO90_LCD_DD12		MFP_CFG_DRV(GPIO90, AF1, FAST)
-#define GPIO91_LCD_DD13		MFP_CFG_DRV(GPIO91, AF1, FAST)
-#define GPIO92_LCD_DD14		MFP_CFG_DRV(GPIO92, AF1, FAST)
-#define GPIO93_LCD_DD15		MFP_CFG_DRV(GPIO93, AF1, FAST)
-#define GPIO94_LCD_DD16		MFP_CFG_DRV(GPIO94, AF1, FAST)
-#define GPIO95_LCD_DD17		MFP_CFG_DRV(GPIO95, AF1, FAST)
-#define GPIO96_LCD_DD18		MFP_CFG_DRV(GPIO96, AF1, FAST)
-#define GPIO97_LCD_DD19		MFP_CFG_DRV(GPIO97, AF1, FAST)
-#define GPIO98_LCD_DD20		MFP_CFG_DRV(GPIO98, AF1, FAST)
-#define GPIO99_LCD_DD21		MFP_CFG_DRV(GPIO99, AF1, FAST)
-#define GPIO100_LCD_DD22	MFP_CFG_DRV(GPIO100, AF1, FAST)
-#define GPIO101_LCD_DD23	MFP_CFG_DRV(GPIO101, AF1, FAST)
-#define GPIO94_SPI_DCLK		MFP_CFG_DRV(GPIO94, AF3, FAST)
-#define GPIO95_SPI_CS0		MFP_CFG_DRV(GPIO95, AF3, FAST)
-#define GPIO96_SPI_DIN		MFP_CFG_DRV(GPIO96, AF3, FAST)
-#define GPIO97_SPI_DOUT		MFP_CFG_DRV(GPIO97, AF3, FAST)
-#define GPIO98_LCD_RST		MFP_CFG_DRV(GPIO98, AF0, FAST)
-
-#define GPIO114_MN_CLK_OUT	MFP_CFG_DRV(GPIO114, AF1, FAST)
-
-/*LCD TV path*/
-#define GPIO124_LCD_DD24	MFP_CFG_DRV(GPIO124, AF2, FAST)
-#define GPIO125_LCD_DD25	MFP_CFG_DRV(GPIO125, AF2, FAST)
-#define GPIO126_LCD_DD33	MFP_CFG_DRV(GPIO126, AF2, FAST)
-#define GPIO127_LCD_DD26	MFP_CFG_DRV(GPIO127, AF2, FAST)
-#define GPIO128_LCD_DD27	MFP_CFG_DRV(GPIO128, AF2, FAST)
-#define GPIO129_LCD_DD28	MFP_CFG_DRV(GPIO129, AF2, FAST)
-#define GPIO130_LCD_DD29	MFP_CFG_DRV(GPIO130, AF2, FAST)
-#define GPIO135_LCD_DD30	MFP_CFG_DRV(GPIO135, AF2, FAST)
-#define GPIO137_LCD_DD31	MFP_CFG_DRV(GPIO137, AF2, FAST)
-#define GPIO138_LCD_DD32	MFP_CFG_DRV(GPIO138, AF2, FAST)
-#define GPIO140_LCD_DD34	MFP_CFG_DRV(GPIO140, AF2, FAST)
-#define GPIO141_LCD_DD35	MFP_CFG_DRV(GPIO141, AF2, FAST)
-
-/* I2C */
-#define GPIO43_TWSI2_SCL	MFP_CFG_DRV(GPIO43, AF1, SLOW)
-#define GPIO44_TWSI2_SDA	MFP_CFG_DRV(GPIO44, AF1, SLOW)
-#define GPIO71_TWSI3_SCL	MFP_CFG_DRV(GPIO71, AF1, SLOW)
-#define GPIO72_TWSI3_SDA	MFP_CFG_DRV(GPIO72, AF1, SLOW)
-#define TWSI4_SCL		MFP_CFG_DRV(TWSI4_SCL, AF0, SLOW)
-#define TWSI4_SDA		MFP_CFG_DRV(TWSI4_SDA, AF0, SLOW)
-#define GPIO99_TWSI5_SCL	MFP_CFG_DRV(GPIO99, AF4, SLOW)
-#define GPIO100_TWSI5_SDA	MFP_CFG_DRV(GPIO100, AF4, SLOW)
-#define GPIO97_TWSI6_SCL	MFP_CFG_DRV(GPIO97, AF2, SLOW)
-#define GPIO98_TWSI6_SDA	MFP_CFG_DRV(GPIO98, AF2, SLOW)
-
-/* SSPA1 */
-#define GPIO24_I2S_SYSCLK	MFP_CFG(GPIO24, AF1)
-#define GPIO25_I2S_BITCLK	MFP_CFG(GPIO25, AF1)
-#define GPIO26_I2S_SYNC		MFP_CFG(GPIO26, AF1)
-#define GPIO27_I2S_DATA_OUT	MFP_CFG(GPIO27, AF1)
-#define GPIO28_I2S_SDATA_IN	MFP_CFG(GPIO28, AF1)
-#define GPIO114_I2S_MCLK	MFP_CFG(GPIO114, AF1)
-
-/* SSPA2 */
-#define GPIO33_SSPA2_CLK	MFP_CFG(GPIO33, AF1)
-#define GPIO34_SSPA2_FRM	MFP_CFG(GPIO34, AF1)
-#define GPIO35_SSPA2_TXD	MFP_CFG(GPIO35, AF1)
-#define GPIO36_SSPA2_RXD	MFP_CFG(GPIO36, AF1)
-
-/* Keypad */
-#define GPIO00_KP_MKIN0		MFP_CFG(GPIO0, AF1)
-#define GPIO01_KP_MKOUT0	MFP_CFG(GPIO1, AF1)
-#define GPIO02_KP_MKIN1		MFP_CFG(GPIO2, AF1)
-#define GPIO03_KP_MKOUT1	MFP_CFG(GPIO3, AF1)
-#define GPIO04_KP_MKIN2		MFP_CFG(GPIO4, AF1)
-#define GPIO05_KP_MKOUT2	MFP_CFG(GPIO5, AF1)
-#define GPIO06_KP_MKIN3		MFP_CFG(GPIO6, AF1)
-#define GPIO07_KP_MKOUT3	MFP_CFG(GPIO7, AF1)
-#define GPIO08_KP_MKIN4		MFP_CFG(GPIO8, AF1)
-#define GPIO09_KP_MKOUT4	MFP_CFG(GPIO9, AF1)
-#define GPIO10_KP_MKIN5		MFP_CFG(GPIO10, AF1)
-#define GPIO11_KP_MKOUT5	MFP_CFG(GPIO11, AF1)
-#define GPIO12_KP_MKIN6		MFP_CFG(GPIO12, AF1)
-#define GPIO13_KP_MKOUT6	MFP_CFG(GPIO13, AF1)
-#define GPIO14_KP_MKIN7		MFP_CFG(GPIO14, AF1)
-#define GPIO15_KP_MKOUT7	MFP_CFG(GPIO15, AF1)
-#define GPIO16_KP_DKIN0		MFP_CFG(GPIO16, AF1)
-#define GPIO17_KP_DKIN1		MFP_CFG(GPIO17, AF1)
-#define GPIO18_KP_DKIN2		MFP_CFG(GPIO18, AF1)
-#define GPIO19_KP_DKIN3		MFP_CFG(GPIO19, AF1)
-#define GPIO20_KP_DKIN4		MFP_CFG(GPIO20, AF1)
-#define GPIO21_KP_DKIN5		MFP_CFG(GPIO21, AF1)
-#define GPIO22_KP_DKIN6		MFP_CFG(GPIO22, AF1)
-#define GPIO23_KP_DKIN7		MFP_CFG(GPIO23, AF1)
-
-/* CAMERA */
-#define GPIO59_CCIC_IN7		MFP_CFG_DRV(GPIO59, AF1, FAST)
-#define GPIO60_CCIC_IN6		MFP_CFG_DRV(GPIO60, AF1, FAST)
-#define GPIO61_CCIC_IN5		MFP_CFG_DRV(GPIO61, AF1, FAST)
-#define GPIO62_CCIC_IN4		MFP_CFG_DRV(GPIO62, AF1, FAST)
-#define GPIO63_CCIC_IN3		MFP_CFG_DRV(GPIO63, AF1, FAST)
-#define GPIO64_CCIC_IN2		MFP_CFG_DRV(GPIO64, AF1, FAST)
-#define GPIO65_CCIC_IN1		MFP_CFG_DRV(GPIO65, AF1, FAST)
-#define GPIO66_CCIC_IN0		MFP_CFG_DRV(GPIO66, AF1, FAST)
-#define GPIO67_CAM_HSYNC	MFP_CFG_DRV(GPIO67, AF1, FAST)
-#define GPIO68_CAM_VSYNC	MFP_CFG_DRV(GPIO68, AF1, FAST)
-#define GPIO69_CAM_MCLK		MFP_CFG_DRV(GPIO69, AF1, FAST)
-#define GPIO70_CAM_PCLK		MFP_CFG_DRV(GPIO70, AF1, FAST)
-
-/* PMIC */
-#define PMIC_PMIC_INT		MFP_CFG(PMIC_INT, AF0)
-
-#endif /* __ASM_MACH_MFP_MMP2_H */
-
diff --git a/arch/arm/mach-mmp/mfp-pxa168.h b/arch/arm/mach-mmp/mfp-pxa168.h
deleted file mode 100644
index 90d16d3419a4..000000000000
--- a/arch/arm/mach-mmp/mfp-pxa168.h
+++ /dev/null
@@ -1,355 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_PXA168_H
-#define __ASM_MACH_MFP_PXA168_H
-
-#include "mfp.h"
-
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x1 << 13)
-#define MFP_DRIVE_MEDIUM	(0x2 << 13)
-#define MFP_DRIVE_FAST		(0x3 << 13)
-
-#undef MFP_CFG
-#undef MFP_CFG_DRV
-
-#define MFP_CFG(pin, af)		\
-	(MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	(MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
-
-/* GPIO */
-#define GPIO0_GPIO		MFP_CFG(GPIO0, AF5)
-#define GPIO1_GPIO		MFP_CFG(GPIO1, AF5)
-#define GPIO2_GPIO		MFP_CFG(GPIO2, AF5)
-#define GPIO3_GPIO		MFP_CFG(GPIO3, AF5)
-#define GPIO4_GPIO		MFP_CFG(GPIO4, AF5)
-#define GPIO5_GPIO		MFP_CFG(GPIO5, AF5)
-#define GPIO6_GPIO		MFP_CFG(GPIO6, AF5)
-#define GPIO7_GPIO		MFP_CFG(GPIO7, AF5)
-#define GPIO8_GPIO		MFP_CFG(GPIO8, AF5)
-#define GPIO9_GPIO		MFP_CFG(GPIO9, AF5)
-#define GPIO10_GPIO		MFP_CFG(GPIO10, AF5)
-#define GPIO11_GPIO		MFP_CFG(GPIO11, AF5)
-#define GPIO12_GPIO		MFP_CFG(GPIO12, AF5)
-#define GPIO13_GPIO		MFP_CFG(GPIO13, AF5)
-#define GPIO14_GPIO		MFP_CFG(GPIO14, AF5)
-#define GPIO15_GPIO		MFP_CFG(GPIO15, AF5)
-#define GPIO16_GPIO		MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO		MFP_CFG(GPIO17, AF5)
-#define GPIO18_GPIO		MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO		MFP_CFG(GPIO19, AF5)
-#define GPIO20_GPIO		MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO		MFP_CFG(GPIO21, AF5)
-#define GPIO22_GPIO		MFP_CFG(GPIO22, AF5)
-#define GPIO23_GPIO		MFP_CFG(GPIO23, AF5)
-#define GPIO24_GPIO		MFP_CFG(GPIO24, AF5)
-#define GPIO25_GPIO		MFP_CFG(GPIO25, AF5)
-#define GPIO26_GPIO		MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO		MFP_CFG(GPIO27, AF5)
-#define GPIO28_GPIO		MFP_CFG(GPIO28, AF5)
-#define GPIO29_GPIO		MFP_CFG(GPIO29, AF5)
-#define GPIO30_GPIO		MFP_CFG(GPIO30, AF5)
-#define GPIO31_GPIO		MFP_CFG(GPIO31, AF5)
-#define GPIO32_GPIO		MFP_CFG(GPIO32, AF5)
-#define GPIO33_GPIO		MFP_CFG(GPIO33, AF5)
-#define GPIO34_GPIO		MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO		MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO		MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO		MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO		MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO		MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO		MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO		MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO		MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO		MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO		MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO		MFP_CFG(GPIO45, AF0)
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
-#define GPIO47_GPIO		MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO		MFP_CFG(GPIO48, AF0)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
-#define GPIO53_GPIO		MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO		MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO		MFP_CFG(GPIO55, AF0)
-#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
-#define GPIO57_GPIO		MFP_CFG(GPIO57, AF0)
-#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
-#define GPIO63_GPIO		MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO		MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO		MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO		MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO		MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO		MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO		MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO		MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO		MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO		MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO		MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO		MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO		MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO		MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO		MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO		MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO		MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO		MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO		MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO		MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO		MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO		MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO		MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO		MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO		MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO		MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO		MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO		MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO		MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO		MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO		MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO		MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO		MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO		MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO		MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO		MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO		MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO		MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO		MFP_CFG(GPIO102, AF0)
-#define GPIO103_GPIO		MFP_CFG(GPIO103, AF0)
-#define GPIO104_GPIO		MFP_CFG(GPIO104, AF0)
-#define GPIO105_GPIO		MFP_CFG(GPIO105, AF0)
-#define GPIO106_GPIO		MFP_CFG(GPIO106, AF0)
-#define GPIO107_GPIO		MFP_CFG(GPIO107, AF0)
-#define GPIO108_GPIO		MFP_CFG(GPIO108, AF0)
-#define GPIO109_GPIO		MFP_CFG(GPIO109, AF0)
-#define GPIO110_GPIO		MFP_CFG(GPIO110, AF0)
-#define GPIO111_GPIO		MFP_CFG(GPIO111, AF0)
-#define GPIO112_GPIO		MFP_CFG(GPIO112, AF0)
-#define GPIO113_GPIO		MFP_CFG(GPIO113, AF0)
-#define GPIO114_GPIO		MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO		MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO		MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO		MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO		MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO		MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO		MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO		MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO		MFP_CFG(GPIO122, AF0)
-
-/* DFI */
-#define GPIO0_DFI_D15		MFP_CFG(GPIO0, AF0)
-#define GPIO1_DFI_D14		MFP_CFG(GPIO1, AF0)
-#define GPIO2_DFI_D13		MFP_CFG(GPIO2, AF0)
-#define GPIO3_DFI_D12		MFP_CFG(GPIO3, AF0)
-#define GPIO4_DFI_D11		MFP_CFG(GPIO4, AF0)
-#define GPIO5_DFI_D10		MFP_CFG(GPIO5, AF0)
-#define GPIO6_DFI_D9		MFP_CFG(GPIO6, AF0)
-#define GPIO7_DFI_D8		MFP_CFG(GPIO7, AF0)
-#define GPIO8_DFI_D7		MFP_CFG(GPIO8, AF0)
-#define GPIO9_DFI_D6		MFP_CFG(GPIO9, AF0)
-#define GPIO10_DFI_D5		MFP_CFG(GPIO10, AF0)
-#define GPIO11_DFI_D4		MFP_CFG(GPIO11, AF0)
-#define GPIO12_DFI_D3		MFP_CFG(GPIO12, AF0)
-#define GPIO13_DFI_D2		MFP_CFG(GPIO13, AF0)
-#define GPIO14_DFI_D1		MFP_CFG(GPIO14, AF0)
-#define GPIO15_DFI_D0		MFP_CFG(GPIO15, AF0)
-
-#define GPIO30_DFI_ADDR0	MFP_CFG(GPIO30, AF0)
-#define GPIO31_DFI_ADDR1	MFP_CFG(GPIO31, AF0)
-#define GPIO32_DFI_ADDR2	MFP_CFG(GPIO32, AF0)
-#define GPIO33_DFI_ADDR3	MFP_CFG(GPIO33, AF0)
-
-/* NAND */
-#define GPIO16_ND_nCS0		MFP_CFG(GPIO16, AF1)
-#define GPIO17_ND_nWE		MFP_CFG(GPIO17, AF0)
-#define GPIO21_ND_ALE		MFP_CFG(GPIO21, AF0)
-#define GPIO22_ND_CLE		MFP_CFG(GPIO22, AF0)
-#define GPIO24_ND_nRE		MFP_CFG(GPIO24, AF0)
-#define GPIO26_ND_RnB1		MFP_CFG(GPIO26, AF1)
-#define GPIO27_ND_RnB2		MFP_CFG(GPIO27, AF1)
-
-/* Static Memory Controller */
-#define GPIO18_SMC_nCS0		MFP_CFG(GPIO18, AF3)
-#define GPIO18_SMC_nCS1		MFP_CFG(GPIO18, AF2)
-#define GPIO16_SMC_nCS0		MFP_CFG(GPIO16, AF2)
-#define GPIO16_SMC_nCS1		MFP_CFG(GPIO16, AF3)
-#define GPIO19_SMC_nCS0		MFP_CFG(GPIO19, AF0)
-#define GPIO20_SMC_nCS1		MFP_CFG(GPIO20, AF2)
-#define GPIO23_SMC_nLUA		MFP_CFG(GPIO23, AF0)
-#define GPIO25_SMC_nLLA		MFP_CFG(GPIO25, AF0)
-#define GPIO27_SMC_IRQ		MFP_CFG(GPIO27, AF0)
-#define GPIO28_SMC_RDY		MFP_CFG(GPIO28, AF0)
-#define GPIO29_SMC_SCLK		MFP_CFG(GPIO29, AF0)
-#define GPIO34_SMC_nCS1		MFP_CFG(GPIO34, AF2)
-#define GPIO35_SMC_BE1		MFP_CFG(GPIO35, AF2)
-#define GPIO36_SMC_BE2		MFP_CFG(GPIO36, AF2)
-
-/* Compact Flash */
-#define GPIO19_CF_nCE1		MFP_CFG(GPIO19, AF3)
-#define GPIO20_CF_nCE2		MFP_CFG(GPIO20, AF3)
-#define GPIO23_CF_nALE		MFP_CFG(GPIO23, AF3)
-#define GPIO25_CF_nRESET	MFP_CFG(GPIO25, AF3)
-#define GPIO28_CF_RDY		MFP_CFG(GPIO28, AF3)
-#define GPIO29_CF_STSCH		MFP_CFG(GPIO29, AF3)
-#define GPIO30_CF_nREG		MFP_CFG(GPIO30, AF3)
-#define GPIO31_CF_nIOIS16	MFP_CFG(GPIO31, AF3)
-#define GPIO32_CF_nCD1		MFP_CFG(GPIO32, AF3)
-#define GPIO33_CF_nCD2		MFP_CFG(GPIO33, AF3)
-
-/* UART */
-#define GPIO8_UART3_TXD		MFP_CFG(GPIO8, AF2)
-#define GPIO9_UART3_RXD		MFP_CFG(GPIO9, AF2)
-#define GPIO1O_UART3_CTS	MFP_CFG(GPIO10, AF2)
-#define GPIO11_UART3_RTS	MFP_CFG(GPIO11, AF2)
-#define GPIO88_UART2_TXD	MFP_CFG(GPIO88, AF2)
-#define GPIO89_UART2_RXD	MFP_CFG(GPIO89, AF2)
-#define GPIO107_UART1_TXD	MFP_CFG_DRV(GPIO107, AF1, FAST)
-#define GPIO107_UART1_RXD	MFP_CFG_DRV(GPIO107, AF2, FAST)
-#define GPIO108_UART1_RXD	MFP_CFG_DRV(GPIO108, AF1, FAST)
-#define GPIO108_UART1_TXD	MFP_CFG_DRV(GPIO108, AF2, FAST)
-#define GPIO109_UART1_CTS	MFP_CFG(GPIO109, AF1)
-#define GPIO109_UART1_RTS	MFP_CFG(GPIO109, AF2)
-#define GPIO110_UART1_RTS	MFP_CFG(GPIO110, AF1)
-#define GPIO110_UART1_CTS	MFP_CFG(GPIO110, AF2)
-#define GPIO111_UART1_RI	MFP_CFG(GPIO111, AF1)
-#define GPIO111_UART1_DSR	MFP_CFG(GPIO111, AF2)
-#define GPIO112_UART1_DTR	MFP_CFG(GPIO111, AF1)
-#define GPIO112_UART1_DCD	MFP_CFG(GPIO112, AF2)
-
-/* MMC1 */
-#define GPIO37_MMC1_DAT7	MFP_CFG(GPIO37, AF1)
-#define GPIO38_MMC1_DAT6	MFP_CFG(GPIO38, AF1)
-#define GPIO54_MMC1_DAT5	MFP_CFG(GPIO54, AF1)
-#define GPIO48_MMC1_DAT4	MFP_CFG(GPIO48, AF1)
-#define GPIO51_MMC1_DAT3	MFP_CFG(GPIO51, AF1)
-#define GPIO52_MMC1_DAT2	MFP_CFG(GPIO52, AF1)
-#define GPIO40_MMC1_DAT1	MFP_CFG(GPIO40, AF1)
-#define GPIO41_MMC1_DAT0	MFP_CFG(GPIO41, AF1)
-#define GPIO49_MMC1_CMD		MFP_CFG(GPIO49, AF1)
-#define GPIO43_MMC1_CLK		MFP_CFG(GPIO43, AF1)
-#define GPIO53_MMC1_CD		MFP_CFG(GPIO53, AF1)
-#define GPIO46_MMC1_WP		MFP_CFG(GPIO46, AF1)
-
-/* MMC2 */
-#define	GPIO28_MMC2_CMD		MFP_CFG_DRV(GPIO28, AF6, FAST)
-#define	GPIO29_MMC2_CLK		MFP_CFG_DRV(GPIO29, AF6, FAST)
-#define	GPIO30_MMC2_DAT0	MFP_CFG_DRV(GPIO30, AF6, FAST)
-#define	GPIO31_MMC2_DAT1	MFP_CFG_DRV(GPIO31, AF6, FAST)
-#define	GPIO32_MMC2_DAT2	MFP_CFG_DRV(GPIO32, AF6, FAST)
-#define	GPIO33_MMC2_DAT3	MFP_CFG_DRV(GPIO33, AF6, FAST)
-
-/* MMC4 */
-#define GPIO125_MMC4_DAT3       MFP_CFG_DRV(GPIO125, AF7, FAST)
-#define GPIO126_MMC4_DAT2       MFP_CFG_DRV(GPIO126, AF7, FAST)
-#define GPIO127_MMC4_DAT1       MFP_CFG_DRV(GPIO127, AF7, FAST)
-#define GPIO0_2_MMC4_DAT0       MFP_CFG_DRV(GPIO0_2, AF7, FAST)
-#define GPIO1_2_MMC4_CMD        MFP_CFG_DRV(GPIO1_2, AF7, FAST)
-#define GPIO2_2_MMC4_CLK        MFP_CFG_DRV(GPIO2_2, AF7, FAST)
-
-/* LCD */
-#define GPIO84_LCD_CS		MFP_CFG(GPIO84, AF1)
-#define GPIO60_LCD_DD0		MFP_CFG(GPIO60, AF1)
-#define GPIO61_LCD_DD1		MFP_CFG(GPIO61, AF1)
-#define GPIO70_LCD_DD10		MFP_CFG(GPIO70, AF1)
-#define GPIO71_LCD_DD11		MFP_CFG(GPIO71, AF1)
-#define GPIO72_LCD_DD12		MFP_CFG(GPIO72, AF1)
-#define GPIO73_LCD_DD13		MFP_CFG(GPIO73, AF1)
-#define GPIO74_LCD_DD14		MFP_CFG(GPIO74, AF1)
-#define GPIO75_LCD_DD15		MFP_CFG(GPIO75, AF1)
-#define GPIO76_LCD_DD16		MFP_CFG(GPIO76, AF1)
-#define GPIO77_LCD_DD17		MFP_CFG(GPIO77, AF1)
-#define GPIO78_LCD_DD18		MFP_CFG(GPIO78, AF1)
-#define GPIO79_LCD_DD19		MFP_CFG(GPIO79, AF1)
-#define GPIO62_LCD_DD2		MFP_CFG(GPIO62, AF1)
-#define GPIO80_LCD_DD20		MFP_CFG(GPIO80, AF1)
-#define GPIO81_LCD_DD21		MFP_CFG(GPIO81, AF1)
-#define GPIO82_LCD_DD22		MFP_CFG(GPIO82, AF1)
-#define GPIO83_LCD_DD23		MFP_CFG(GPIO83, AF1)
-#define GPIO63_LCD_DD3		MFP_CFG(GPIO63, AF1)
-#define GPIO64_LCD_DD4		MFP_CFG(GPIO64, AF1)
-#define GPIO65_LCD_DD5		MFP_CFG(GPIO65, AF1)
-#define GPIO66_LCD_DD6		MFP_CFG(GPIO66, AF1)
-#define GPIO67_LCD_DD7		MFP_CFG(GPIO67, AF1)
-#define GPIO68_LCD_DD8		MFP_CFG(GPIO68, AF1)
-#define GPIO69_LCD_DD9		MFP_CFG(GPIO69, AF1)
-#define GPIO59_LCD_DENA_BIAS	MFP_CFG(GPIO59, AF1)
-#define GPIO56_LCD_FCLK_RD	MFP_CFG(GPIO56, AF1)
-#define GPIO57_LCD_LCLK_A0	MFP_CFG(GPIO57, AF1)
-#define GPIO58_LCD_PCLK_WR	MFP_CFG(GPIO58, AF1)
-#define GPIO85_LCD_VSYNC	MFP_CFG(GPIO85, AF1)
-
-/* I2C */
-#define GPIO105_CI2C_SDA	MFP_CFG(GPIO105, AF1)
-#define GPIO106_CI2C_SCL	MFP_CFG(GPIO106, AF1)
-
-/* I2S */
-#define GPIO113_I2S_MCLK	MFP_CFG(GPIO113, AF6)
-#define GPIO114_I2S_FRM		MFP_CFG(GPIO114, AF1)
-#define GPIO115_I2S_BCLK	MFP_CFG(GPIO115, AF1)
-#define GPIO116_I2S_RXD		MFP_CFG(GPIO116, AF2)
-#define GPIO116_I2S_TXD         MFP_CFG(GPIO116, AF1)
-#define GPIO117_I2S_TXD		MFP_CFG(GPIO117, AF2)
-
-/* PWM */
-#define GPIO96_PWM3_OUT		MFP_CFG(GPIO96, AF1)
-#define GPIO97_PWM2_OUT		MFP_CFG(GPIO97, AF1)
-#define GPIO98_PWM1_OUT		MFP_CFG(GPIO98, AF1)
-#define GPIO104_PWM4_OUT	MFP_CFG(GPIO104, AF1)
-#define GPIO106_PWM2_OUT	MFP_CFG(GPIO106, AF2)
-#define GPIO74_PWM4_OUT		MFP_CFG(GPIO74, AF2)
-#define GPIO75_PWM3_OUT		MFP_CFG(GPIO75, AF2)
-#define GPIO76_PWM2_OUT		MFP_CFG(GPIO76, AF2)
-#define GPIO77_PWM1_OUT		MFP_CFG(GPIO77, AF2)
-#define GPIO82_PWM4_OUT		MFP_CFG(GPIO82, AF2)
-#define GPIO83_PWM3_OUT		MFP_CFG(GPIO83, AF2)
-#define GPIO84_PWM2_OUT		MFP_CFG(GPIO84, AF2)
-#define GPIO85_PWM1_OUT		MFP_CFG(GPIO85, AF2)
-#define GPIO84_PWM1_OUT		MFP_CFG(GPIO84, AF4)
-#define GPIO122_PWM3_OUT	MFP_CFG(GPIO122, AF3)
-#define GPIO123_PWM1_OUT	MFP_CFG(GPIO123, AF1)
-#define GPIO124_PWM2_OUT	MFP_CFG(GPIO124, AF1)
-#define GPIO125_PWM3_OUT	MFP_CFG(GPIO125, AF1)
-#define GPIO126_PWM4_OUT	MFP_CFG(GPIO126, AF1)
-#define GPIO86_PWM1_OUT		MFP_CFG(GPIO86, AF2)
-#define GPIO86_PWM2_OUT		MFP_CFG(GPIO86, AF3)
-
-/* Keypad */
-#define GPIO109_KP_MKIN1        MFP_CFG(GPIO109, AF7)
-#define GPIO110_KP_MKIN0        MFP_CFG(GPIO110, AF7)
-#define GPIO111_KP_MKOUT7       MFP_CFG(GPIO111, AF7)
-#define GPIO112_KP_MKOUT6       MFP_CFG(GPIO112, AF7)
-#define GPIO121_KP_MKIN4        MFP_CFG(GPIO121, AF7)
-
-/* Fast Ethernet */
-#define GPIO86_TX_CLK		MFP_CFG(GPIO86, AF5)
-#define GPIO87_TX_EN		MFP_CFG(GPIO87, AF5)
-#define GPIO88_TX_DQ3		MFP_CFG(GPIO88, AF5)
-#define GPIO89_TX_DQ2		MFP_CFG(GPIO89, AF5)
-#define GPIO90_TX_DQ1		MFP_CFG(GPIO90, AF5)
-#define GPIO91_TX_DQ0		MFP_CFG(GPIO91, AF5)
-#define GPIO92_MII_CRS		MFP_CFG(GPIO92, AF5)
-#define GPIO93_MII_COL		MFP_CFG(GPIO93, AF5)
-#define GPIO94_RX_CLK		MFP_CFG(GPIO94, AF5)
-#define GPIO95_RX_ER		MFP_CFG(GPIO95, AF5)
-#define GPIO96_RX_DQ3		MFP_CFG(GPIO96, AF5)
-#define GPIO97_RX_DQ2		MFP_CFG(GPIO97, AF5)
-#define GPIO98_RX_DQ1		MFP_CFG(GPIO98, AF5)
-#define GPIO99_RX_DQ0		MFP_CFG(GPIO99, AF5)
-#define GPIO100_MII_MDC		MFP_CFG(GPIO100, AF5)
-#define GPIO101_MII_MDIO	MFP_CFG(GPIO101, AF5)
-#define GPIO103_RX_DV		MFP_CFG(GPIO103, AF5)
-
-/* SSP2 */
-#define GPIO107_SSP2_RXD	MFP_CFG(GPIO107, AF4)
-#define GPIO108_SSP2_TXD	MFP_CFG(GPIO108, AF4)
-#define GPIO111_SSP2_CLK	MFP_CFG(GPIO111, AF4)
-#define GPIO112_SSP2_FRM	MFP_CFG(GPIO112, AF4)
-
-#endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/mfp-pxa910.h b/arch/arm/mach-mmp/mfp-pxa910.h
deleted file mode 100644
index 6f900cade631..000000000000
--- a/arch/arm/mach-mmp/mfp-pxa910.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_PXA910_H
-#define __ASM_MACH_MFP_PXA910_H
-
-#include "mfp.h"
-
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x2 << 13)
-#define MFP_DRIVE_MEDIUM	(0x4 << 13)
-#define MFP_DRIVE_FAST		(0x6 << 13)
-
-/* UART2 */
-#define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF6)
-#define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF6)
-
-/* UART3 */
-#define GPIO31_UART3_RXD	MFP_CFG(GPIO31, AF4)
-#define GPIO32_UART3_TXD	MFP_CFG(GPIO32, AF4)
-
-/*IRDA*/
-#define GPIO51_IRDA_SHDN	MFP_CFG(GPIO51, AF0)
-
-/* SMC */
-#define SM_nCS0_nCS0		MFP_CFG(SM_nCS0, AF0)
-#define SM_ADV_SM_ADV		MFP_CFG(SM_ADV, AF0)
-#define SM_SCLK_SM_SCLK		MFP_CFG(SM_SCLK, AF0)
-#define SM_BE0_SM_BE0		MFP_CFG(SM_BE0, AF1)
-#define SM_BE1_SM_BE1		MFP_CFG(SM_BE1, AF1)
-
-/* I2C */
-#define GPIO53_CI2C_SCL		MFP_CFG(GPIO53, AF2)
-#define GPIO54_CI2C_SDA		MFP_CFG(GPIO54, AF2)
-
-/* SSP1 (I2S) */
-#define GPIO24_SSP1_SDATA_IN	MFP_CFG_DRV(GPIO24, AF1, MEDIUM)
-#define GPIO21_SSP1_BITCLK	MFP_CFG_DRV(GPIO21, AF1, MEDIUM)
-#define GPIO20_SSP1_SYSCLK	MFP_CFG_DRV(GPIO20, AF1, MEDIUM)
-#define GPIO22_SSP1_SYNC	MFP_CFG_DRV(GPIO22, AF1, MEDIUM)
-#define GPIO23_SSP1_DATA_OUT	MFP_CFG_DRV(GPIO23, AF1, MEDIUM)
-#define GPIO124_MN_CLK_OUT	MFP_CFG_DRV(GPIO124, AF1, MEDIUM)
-#define GPIO123_CLK_REQ		MFP_CFG_DRV(GPIO123, AF0, MEDIUM)
-
-/* DFI */
-#define DF_IO0_ND_IO0		MFP_CFG(DF_IO0, AF0)
-#define DF_IO1_ND_IO1		MFP_CFG(DF_IO1, AF0)
-#define DF_IO2_ND_IO2		MFP_CFG(DF_IO2, AF0)
-#define DF_IO3_ND_IO3		MFP_CFG(DF_IO3, AF0)
-#define DF_IO4_ND_IO4		MFP_CFG(DF_IO4, AF0)
-#define DF_IO5_ND_IO5		MFP_CFG(DF_IO5, AF0)
-#define DF_IO6_ND_IO6		MFP_CFG(DF_IO6, AF0)
-#define DF_IO7_ND_IO7		MFP_CFG(DF_IO7, AF0)
-#define DF_IO8_ND_IO8		MFP_CFG(DF_IO8, AF0)
-#define DF_IO9_ND_IO9		MFP_CFG(DF_IO9, AF0)
-#define DF_IO10_ND_IO10		MFP_CFG(DF_IO10, AF0)
-#define DF_IO11_ND_IO11		MFP_CFG(DF_IO11, AF0)
-#define DF_IO12_ND_IO12		MFP_CFG(DF_IO12, AF0)
-#define DF_IO13_ND_IO13		MFP_CFG(DF_IO13, AF0)
-#define DF_IO14_ND_IO14		MFP_CFG(DF_IO14, AF0)
-#define DF_IO15_ND_IO15		MFP_CFG(DF_IO15, AF0)
-#define DF_nCS0_SM_nCS2_nCS0	MFP_CFG(DF_nCS0_SM_nCS2, AF0)
-#define DF_ALE_SM_WEn_ND_ALE	MFP_CFG(DF_ALE_SM_WEn, AF1)
-#define DF_CLE_SM_OEn_ND_CLE	MFP_CFG(DF_CLE_SM_OEn, AF0)
-#define DF_WEn_DF_WEn		MFP_CFG(DF_WEn, AF1)
-#define DF_REn_DF_REn		MFP_CFG(DF_REn, AF1)
-#define DF_RDY0_DF_RDY0		MFP_CFG(DF_RDY0, AF0)
-
-/*keypad*/
-#define GPIO00_KP_MKIN0		MFP_CFG(GPIO0, AF1)
-#define GPIO01_KP_MKOUT0	MFP_CFG(GPIO1, AF1)
-#define GPIO02_KP_MKIN1		MFP_CFG(GPIO2, AF1)
-#define GPIO03_KP_MKOUT1	MFP_CFG(GPIO3, AF1)
-#define GPIO04_KP_MKIN2		MFP_CFG(GPIO4, AF1)
-#define GPIO05_KP_MKOUT2	MFP_CFG(GPIO5, AF1)
-#define GPIO06_KP_MKIN3		MFP_CFG(GPIO6, AF1)
-#define GPIO07_KP_MKOUT3	MFP_CFG(GPIO7, AF1)
-#define GPIO08_KP_MKIN4		MFP_CFG(GPIO8, AF1)
-#define GPIO09_KP_MKOUT4	MFP_CFG(GPIO9, AF1)
-#define GPIO10_KP_MKIN5		MFP_CFG(GPIO10, AF1)
-#define GPIO11_KP_MKOUT5	MFP_CFG(GPIO11, AF1)
-#define GPIO12_KP_MKIN6		MFP_CFG(GPIO12, AF1)
-#define GPIO13_KP_MKOUT6	MFP_CFG(GPIO13, AF1)
-#define GPIO14_KP_MKIN7		MFP_CFG(GPIO14, AF1)
-#define GPIO15_KP_MKOUT7	MFP_CFG(GPIO15, AF1)
-#define GPIO16_KP_DKIN0		MFP_CFG(GPIO16, AF1)
-#define GPIO17_KP_DKIN1		MFP_CFG(GPIO17, AF1)
-#define GPIO18_KP_DKIN2		MFP_CFG(GPIO18, AF1)
-#define GPIO19_KP_DKIN3		MFP_CFG(GPIO19, AF1)
-
-/* LCD */
-#define GPIO81_LCD_FCLK		MFP_CFG(GPIO81, AF1)
-#define GPIO82_LCD_LCLK		MFP_CFG(GPIO82, AF1)
-#define GPIO83_LCD_PCLK		MFP_CFG(GPIO83, AF1)
-#define GPIO84_LCD_DENA		MFP_CFG(GPIO84, AF1)
-#define GPIO85_LCD_DD0		MFP_CFG(GPIO85, AF1)
-#define GPIO86_LCD_DD1		MFP_CFG(GPIO86, AF1)
-#define GPIO87_LCD_DD2		MFP_CFG(GPIO87, AF1)
-#define GPIO88_LCD_DD3		MFP_CFG(GPIO88, AF1)
-#define GPIO89_LCD_DD4		MFP_CFG(GPIO89, AF1)
-#define GPIO90_LCD_DD5		MFP_CFG(GPIO90, AF1)
-#define GPIO91_LCD_DD6		MFP_CFG(GPIO91, AF1)
-#define GPIO92_LCD_DD7		MFP_CFG(GPIO92, AF1)
-#define GPIO93_LCD_DD8		MFP_CFG(GPIO93, AF1)
-#define GPIO94_LCD_DD9		MFP_CFG(GPIO94, AF1)
-#define GPIO95_LCD_DD10		MFP_CFG(GPIO95, AF1)
-#define GPIO96_LCD_DD11		MFP_CFG(GPIO96, AF1)
-#define GPIO97_LCD_DD12		MFP_CFG(GPIO97, AF1)
-#define GPIO98_LCD_DD13		MFP_CFG(GPIO98, AF1)
-#define GPIO100_LCD_DD14	MFP_CFG(GPIO100, AF1)
-#define GPIO101_LCD_DD15	MFP_CFG(GPIO101, AF1)
-#define GPIO102_LCD_DD16	MFP_CFG(GPIO102, AF1)
-#define GPIO103_LCD_DD17	MFP_CFG(GPIO103, AF1)
-#define GPIO104_LCD_DD18	MFP_CFG(GPIO104, AF1)
-#define GPIO105_LCD_DD19	MFP_CFG(GPIO105, AF1)
-#define GPIO106_LCD_DD20	MFP_CFG(GPIO106, AF1)
-#define GPIO107_LCD_DD21	MFP_CFG(GPIO107, AF1)
-#define GPIO108_LCD_DD22	MFP_CFG(GPIO108, AF1)
-#define GPIO109_LCD_DD23	MFP_CFG(GPIO109, AF1)
-
-#define GPIO104_LCD_SPIDOUT	MFP_CFG(GPIO104, AF3)
-#define GPIO105_LCD_SPIDIN	MFP_CFG(GPIO105, AF3)
-#define GPIO107_LCD_CS1 	MFP_CFG(GPIO107, AF3)
-#define GPIO108_LCD_DCLK	MFP_CFG(GPIO108, AF3)
-
-#define GPIO106_LCD_RESET	MFP_CFG(GPIO106, AF0)
-
-/*smart panel*/
-#define GPIO82_LCD_A0		MFP_CFG(GPIO82, AF0)
-#define GPIO83_LCD_WR		MFP_CFG(GPIO83, AF0)
-#define GPIO103_LCD_CS		MFP_CFG(GPIO103, AF0)
-
-/*1wire*/
-#define GPIO106_1WIRE		MFP_CFG(GPIO106, AF3)
-
-/*CCIC*/
-#define GPIO67_CCIC_IN7		MFP_CFG_DRV(GPIO67, AF1, MEDIUM)
-#define GPIO68_CCIC_IN6		MFP_CFG_DRV(GPIO68, AF1, MEDIUM)
-#define GPIO69_CCIC_IN5		MFP_CFG_DRV(GPIO69, AF1, MEDIUM)
-#define GPIO70_CCIC_IN4		MFP_CFG_DRV(GPIO70, AF1, MEDIUM)
-#define GPIO71_CCIC_IN3		MFP_CFG_DRV(GPIO71, AF1, MEDIUM)
-#define GPIO72_CCIC_IN2		MFP_CFG_DRV(GPIO72, AF1, MEDIUM)
-#define GPIO73_CCIC_IN1		MFP_CFG_DRV(GPIO73, AF1, MEDIUM)
-#define GPIO74_CCIC_IN0		MFP_CFG_DRV(GPIO74, AF1, MEDIUM)
-#define GPIO75_CAM_HSYNC	MFP_CFG_DRV(GPIO75, AF1, MEDIUM)
-#define GPIO76_CAM_VSYNC	MFP_CFG_DRV(GPIO76, AF1, MEDIUM)
-#define GPIO77_CAM_MCLK		MFP_CFG_DRV(GPIO77, AF1, MEDIUM)
-#define GPIO78_CAM_PCLK		MFP_CFG_DRV(GPIO78, AF1, MEDIUM)
-
-/* MMC1 */
-#define MMC1_DAT7_MMC1_DAT7	MFP_CFG_DRV(MMC1_DAT7, AF0, MEDIUM)
-#define MMC1_DAT6_MMC1_DAT6	MFP_CFG_DRV(MMC1_DAT6, AF0, MEDIUM)
-#define MMC1_DAT5_MMC1_DAT5	MFP_CFG_DRV(MMC1_DAT5, AF0, MEDIUM)
-#define MMC1_DAT4_MMC1_DAT4	MFP_CFG_DRV(MMC1_DAT4, AF0, MEDIUM)
-#define MMC1_DAT3_MMC1_DAT3	MFP_CFG_DRV(MMC1_DAT3, AF0, MEDIUM)
-#define MMC1_DAT2_MMC1_DAT2	MFP_CFG_DRV(MMC1_DAT2, AF0, MEDIUM)
-#define MMC1_DAT1_MMC1_DAT1	MFP_CFG_DRV(MMC1_DAT1, AF0, MEDIUM)
-#define MMC1_DAT0_MMC1_DAT0	MFP_CFG_DRV(MMC1_DAT0, AF0, MEDIUM)
-#define MMC1_CMD_MMC1_CMD	MFP_CFG_DRV(MMC1_CMD, AF0, MEDIUM)
-#define MMC1_CLK_MMC1_CLK	MFP_CFG_DRV(MMC1_CLK, AF0, MEDIUM)
-#define MMC1_CD_MMC1_CD		MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
-#define MMC1_WP_MMC1_WP		MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
-
-/* PWM */
-#define GPIO27_PWM3_AF2		MFP_CFG(GPIO27, AF2)
-#define GPIO51_PWM2_OUT		MFP_CFG(GPIO51, AF2)
-#define GPIO117_PWM1_OUT	MFP_CFG(GPIO117, AF2)
-#define GPIO118_PWM2_OUT	MFP_CFG(GPIO118, AF2)
-#define GPIO119_PWM3_OUT	MFP_CFG(GPIO119, AF2)
-#define GPIO120_PWM4_OUT	MFP_CFG(GPIO120, AF2)
-
-#endif /* __ASM_MACH MFP_PXA910_H */
diff --git a/arch/arm/mach-mmp/mfp.h b/arch/arm/mach-mmp/mfp.h
deleted file mode 100644
index 75a4acb33b1b..000000000000
--- a/arch/arm/mach-mmp/mfp.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_H
-#define __ASM_MACH_MFP_H
-
-#include <plat/mfp.h>
-
-/*
- * NOTE: the MFPR register bit definitions on PXA168 processor lines are a
- * bit different from those on PXA3xx.  Bit [7:10] are now reserved, which
- * were SLEEP_OE_N, SLEEP_DATA, SLEEP_SEL and the LSB of DRIVE bits.
- *
- * To cope with this difference and re-use the pxa3xx mfp code as much as
- * possible, we make the following compromise:
- *
- * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
- * 2. DRIVE strength definitions redefined to include the reserved bit
- *    - the reserved bit differs between pxa168 and pxa910, and the
- *      MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h
- * 3. Override MFP_CFG() and MFP_CFG_DRV()
- * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
- */
-
-#undef MFP_CFG
-#undef MFP_CFG_DRV
-#undef MFP_CFG_LPM
-#undef MFP_CFG_X
-#undef MFP_CFG_DEFAULT
-
-#define MFP_CFG(pin, af)		\
-	(MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	(MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
-
-#endif /* __ASM_MACH_MFP_H */
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
deleted file mode 100644
index bbc4c2274de3..000000000000
--- a/arch/arm/mach-mmp/mmp2.c
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-mmp/mmp2.c
- *
- * code name MMP2
- *
- * Copyright (C) 2009 Marvell International Ltd.
- */
-#include <linux/clk/mmp.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqchip/mmp.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware/cache-tauros2.h>
-
-#include <asm/mach/time.h>
-#include "addr-map.h"
-#include "regs-apbc.h"
-#include <linux/soc/mmp/cputype.h>
-#include "irqs.h"
-#include "mfp.h"
-#include "devices.h"
-#include "mmp2.h"
-#include "pm-mmp2.h"
-
-#include "common.h"
-
-#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
-
-static struct mfp_addr_map mmp2_addr_map[] __initdata = {
-
-	MFP_ADDR_X(GPIO0, GPIO58, 0x54),
-	MFP_ADDR_X(GPIO59, GPIO73, 0x280),
-	MFP_ADDR_X(GPIO74, GPIO101, 0x170),
-
-	MFP_ADDR(GPIO102, 0x0),
-	MFP_ADDR(GPIO103, 0x4),
-	MFP_ADDR(GPIO104, 0x1fc),
-	MFP_ADDR(GPIO105, 0x1f8),
-	MFP_ADDR(GPIO106, 0x1f4),
-	MFP_ADDR(GPIO107, 0x1f0),
-	MFP_ADDR(GPIO108, 0x21c),
-	MFP_ADDR(GPIO109, 0x218),
-	MFP_ADDR(GPIO110, 0x214),
-	MFP_ADDR(GPIO111, 0x200),
-	MFP_ADDR(GPIO112, 0x244),
-	MFP_ADDR(GPIO113, 0x25c),
-	MFP_ADDR(GPIO114, 0x164),
-	MFP_ADDR_X(GPIO115, GPIO122, 0x260),
-
-	MFP_ADDR(GPIO123, 0x148),
-	MFP_ADDR_X(GPIO124, GPIO141, 0xc),
-
-	MFP_ADDR(GPIO142, 0x8),
-	MFP_ADDR_X(GPIO143, GPIO151, 0x220),
-	MFP_ADDR_X(GPIO152, GPIO153, 0x248),
-	MFP_ADDR_X(GPIO154, GPIO155, 0x254),
-	MFP_ADDR_X(GPIO156, GPIO159, 0x14c),
-
-	MFP_ADDR(GPIO160, 0x250),
-	MFP_ADDR(GPIO161, 0x210),
-	MFP_ADDR(GPIO162, 0x20c),
-	MFP_ADDR(GPIO163, 0x208),
-	MFP_ADDR(GPIO164, 0x204),
-	MFP_ADDR(GPIO165, 0x1ec),
-	MFP_ADDR(GPIO166, 0x1e8),
-	MFP_ADDR(GPIO167, 0x1e4),
-	MFP_ADDR(GPIO168, 0x1e0),
-
-	MFP_ADDR_X(TWSI1_SCL, TWSI1_SDA, 0x140),
-	MFP_ADDR_X(TWSI4_SCL, TWSI4_SDA, 0x2bc),
-
-	MFP_ADDR(PMIC_INT, 0x2c4),
-	MFP_ADDR(CLK_REQ, 0x160),
-
-	MFP_ADDR_END,
-};
-
-void mmp2_clear_pmic_int(void)
-{
-	void __iomem *mfpr_pmic;
-	unsigned long data;
-
-	mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4;
-	data = __raw_readl(mfpr_pmic);
-	__raw_writel(data | (1 << 6), mfpr_pmic);
-	__raw_writel(data, mfpr_pmic);
-}
-
-void __init mmp2_init_irq(void)
-{
-	mmp2_init_icu();
-#ifdef CONFIG_PM
-	icu_irq_chip.irq_set_wake = mmp2_set_wake;
-#endif
-}
-
-static int __init mmp2_init(void)
-{
-	if (cpu_is_mmp2()) {
-#ifdef CONFIG_CACHE_TAUROS2
-		tauros2_init(0);
-#endif
-		mfp_init_base(MFPR_VIRT_BASE);
-		mfp_init_addr(mmp2_addr_map);
-		mmp2_clk_init(APB_PHYS_BASE + 0x50000,
-			      AXI_PHYS_BASE + 0x82800,
-			      APB_PHYS_BASE + 0x15000);
-	}
-
-	return 0;
-}
-postcore_initcall(mmp2_init);
-
-#define APBC_TIMERS	APBC_REG(0x024)
-
-void __init mmp2_timer_init(void)
-{
-	unsigned long clk_rst;
-
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
-
-	/*
-	 * enable bus/functional clock, enable 6.5MHz (divider 4),
-	 * release reset
-	 */
-	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
-	__raw_writel(clk_rst, APBC_TIMERS);
-
-	mmp_timer_init(IRQ_MMP2_TIMER1, 6500000);
-}
-
-/* on-chip devices */
-MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
-MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
-MMP2_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4018000, 0x30, 22, 23);
-MMP2_DEVICE(uart4, "pxa2xx-uart", 3, UART4, 0xd4016000, 0x30, 18, 19);
-MMP2_DEVICE(twsi1, "pxa2xx-i2c", 0, TWSI1, 0xd4011000, 0x70);
-MMP2_DEVICE(twsi2, "pxa2xx-i2c", 1, TWSI2, 0xd4031000, 0x70);
-MMP2_DEVICE(twsi3, "pxa2xx-i2c", 2, TWSI3, 0xd4032000, 0x70);
-MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70);
-MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70);
-MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70);
-MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29);
-MMP2_DEVICE(sdh0, "sdhci-pxav3", 0, MMC, 0xd4280000, 0x120);
-MMP2_DEVICE(sdh1, "sdhci-pxav3", 1, MMC2, 0xd4280800, 0x120);
-MMP2_DEVICE(sdh2, "sdhci-pxav3", 2, MMC3, 0xd4281000, 0x120);
-MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120);
-MMP2_DEVICE(asram, "asram", -1, NONE, 0xe0000000, 0x4000);
-/* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */
-MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000);
-
-struct resource mmp2_resource_gpio[] = {
-	{
-		.start	= 0xd4019000,
-		.end	= 0xd4019fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_MMP2_GPIO,
-		.end	= IRQ_MMP2_GPIO,
-		.name	= "gpio_mux",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mmp2_device_gpio = {
-	.name		= "mmp2-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mmp2_resource_gpio),
-	.resource	= mmp2_resource_gpio,
-};
diff --git a/arch/arm/mach-mmp/mmp2.h b/arch/arm/mach-mmp/mmp2.h
deleted file mode 100644
index adafc4fba8f4..000000000000
--- a/arch/arm/mach-mmp/mmp2.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MMP2_H
-#define __ASM_MACH_MMP2_H
-
-#include <linux/platform_data/pxa_sdhci.h>
-
-extern void mmp2_timer_init(void);
-extern void __init mmp2_init_icu(void);
-extern void __init mmp2_init_irq(void);
-extern void mmp2_clear_pmic_int(void);
-
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/dma-mmp_tdma.h>
-
-#include "devices.h"
-
-extern struct pxa_device_desc mmp2_device_uart1;
-extern struct pxa_device_desc mmp2_device_uart2;
-extern struct pxa_device_desc mmp2_device_uart3;
-extern struct pxa_device_desc mmp2_device_uart4;
-extern struct pxa_device_desc mmp2_device_twsi1;
-extern struct pxa_device_desc mmp2_device_twsi2;
-extern struct pxa_device_desc mmp2_device_twsi3;
-extern struct pxa_device_desc mmp2_device_twsi4;
-extern struct pxa_device_desc mmp2_device_twsi5;
-extern struct pxa_device_desc mmp2_device_twsi6;
-extern struct pxa_device_desc mmp2_device_sdh0;
-extern struct pxa_device_desc mmp2_device_sdh1;
-extern struct pxa_device_desc mmp2_device_sdh2;
-extern struct pxa_device_desc mmp2_device_sdh3;
-extern struct pxa_device_desc mmp2_device_asram;
-extern struct pxa_device_desc mmp2_device_isram;
-
-extern struct platform_device mmp2_device_gpio;
-
-static inline int mmp2_add_uart(int id)
-{
-	struct pxa_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &mmp2_device_uart1; break;
-	case 2: d = &mmp2_device_uart2; break;
-	case 3: d = &mmp2_device_uart3; break;
-	case 4: d = &mmp2_device_uart4; break;
-	default:
-		return -EINVAL;
-	}
-
-	return pxa_register_device(d, NULL, 0);
-}
-
-static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data,
-				  struct i2c_board_info *info, unsigned size)
-{
-	struct pxa_device_desc *d = NULL;
-	int ret;
-
-	switch (id) {
-	case 1: d = &mmp2_device_twsi1; break;
-	case 2: d = &mmp2_device_twsi2; break;
-	case 3: d = &mmp2_device_twsi3; break;
-	case 4: d = &mmp2_device_twsi4; break;
-	case 5: d = &mmp2_device_twsi5; break;
-	case 6: d = &mmp2_device_twsi6; break;
-	default:
-		return -EINVAL;
-	}
-
-	ret = i2c_register_board_info(id - 1, info, size);
-	if (ret)
-		return ret;
-
-	return pxa_register_device(d, data, sizeof(*data));
-}
-
-static inline int mmp2_add_sdhost(int id, struct sdhci_pxa_platdata *data)
-{
-	struct pxa_device_desc *d = NULL;
-
-	switch (id) {
-	case 0: d = &mmp2_device_sdh0; break;
-	case 1: d = &mmp2_device_sdh1; break;
-	case 2: d = &mmp2_device_sdh2; break;
-	case 3: d = &mmp2_device_sdh3; break;
-	default:
-		return -EINVAL;
-	}
-
-	return pxa_register_device(d, data, sizeof(*data));
-}
-
-static inline int mmp2_add_asram(struct sram_platdata *data)
-{
-	return pxa_register_device(&mmp2_device_asram, data, sizeof(*data));
-}
-
-static inline int mmp2_add_isram(struct sram_platdata *data)
-{
-	return pxa_register_device(&mmp2_device_isram, data, sizeof(*data));
-}
-
-#endif /* __ASM_MACH_MMP2_H */
-
diff --git a/arch/arm/mach-mmp/pm-mmp2.c b/arch/arm/mach-mmp/pm-mmp2.c
deleted file mode 100644
index 7a6f74c32d42..000000000000
--- a/arch/arm/mach-mmp/pm-mmp2.c
+++ /dev/null
@@ -1,248 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * MMP2 Power Management Routines
- *
- * (C) Copyright 2012 Marvell International Ltd.
- * All Rights Reserved
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/suspend.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <asm/mach-types.h>
-
-#include <linux/soc/mmp/cputype.h>
-#include "addr-map.h"
-#include "pm-mmp2.h"
-#include "regs-icu.h"
-#include "irqs.h"
-
-int mmp2_set_wake(struct irq_data *d, unsigned int on)
-{
-	unsigned long data = 0;
-	int irq = d->irq;
-
-	/* enable wakeup sources */
-	switch (irq) {
-	case IRQ_MMP2_RTC:
-	case IRQ_MMP2_RTC_ALARM:
-		data = MPMU_WUCRM_PJ_WAKEUP(4) | MPMU_WUCRM_PJ_RTC_ALARM;
-		break;
-	case IRQ_MMP2_PMIC:
-		data = MPMU_WUCRM_PJ_WAKEUP(7);
-		break;
-	case IRQ_MMP2_MMC2:
-		/* mmc use WAKEUP2, same as GPIO wakeup source */
-		data = MPMU_WUCRM_PJ_WAKEUP(2);
-		break;
-	}
-	if (on) {
-		if (data) {
-			data |= __raw_readl(MPMU_WUCRM_PJ);
-			__raw_writel(data, MPMU_WUCRM_PJ);
-		}
-	} else {
-		if (data) {
-			data = ~data & __raw_readl(MPMU_WUCRM_PJ);
-			__raw_writel(data, MPMU_WUCRM_PJ);
-		}
-	}
-	return 0;
-}
-
-static void pm_scu_clk_disable(void)
-{
-	unsigned int val;
-
-	/* close AXI fabric clock gate */
-	__raw_writel(0x0, CIU_REG(0x64));
-	__raw_writel(0x0, CIU_REG(0x68));
-
-	/* close MCB master clock gate */
-	val = __raw_readl(CIU_REG(0x1c));
-	val |= 0xf0;
-	__raw_writel(val, CIU_REG(0x1c));
-
-	return ;
-}
-
-static void pm_scu_clk_enable(void)
-{
-	unsigned int val;
-
-	/* open AXI fabric clock gate */
-	__raw_writel(0x03003003, CIU_REG(0x64));
-	__raw_writel(0x00303030, CIU_REG(0x68));
-
-	/* open MCB master clock gate */
-	val = __raw_readl(CIU_REG(0x1c));
-	val &= ~(0xf0);
-	__raw_writel(val, CIU_REG(0x1c));
-
-	return ;
-}
-
-static void pm_mpmu_clk_disable(void)
-{
-	/*
-	 * disable clocks in MPMU_CGR_PJ register
-	 * except clock for APMU_PLL1, APMU_PLL1_2 and AP_26M
-	 */
-	__raw_writel(0x0000a010, MPMU_CGR_PJ);
-}
-
-static void pm_mpmu_clk_enable(void)
-{
-	unsigned int val;
-
-	__raw_writel(0xdffefffe, MPMU_CGR_PJ);
-	val = __raw_readl(MPMU_PLL2_CTRL1);
-	val |= (1 << 29);
-	__raw_writel(val, MPMU_PLL2_CTRL1);
-
-	return ;
-}
-
-void mmp2_pm_enter_lowpower_mode(int state)
-{
-	uint32_t idle_cfg, apcr;
-
-	idle_cfg = __raw_readl(APMU_PJ_IDLE_CFG);
-	apcr = __raw_readl(MPMU_PCR_PJ);
-	apcr &= ~(MPMU_PCR_PJ_SLPEN | MPMU_PCR_PJ_DDRCORSD | MPMU_PCR_PJ_APBSD
-		 | MPMU_PCR_PJ_AXISD | MPMU_PCR_PJ_VCTCXOSD | (1 << 13));
-	idle_cfg &= ~APMU_PJ_IDLE_CFG_PJ_IDLE;
-
-	switch (state) {
-	case POWER_MODE_SYS_SLEEP:
-		apcr |= MPMU_PCR_PJ_SLPEN;		/* set the SLPEN bit */
-		apcr |= MPMU_PCR_PJ_VCTCXOSD;		/* set VCTCXOSD */
-		fallthrough;
-	case POWER_MODE_CHIP_SLEEP:
-		apcr |= MPMU_PCR_PJ_SLPEN;
-		fallthrough;
-	case POWER_MODE_APPS_SLEEP:
-		apcr |= MPMU_PCR_PJ_APBSD;		/* set APBSD */
-		fallthrough;
-	case POWER_MODE_APPS_IDLE:
-		apcr |= MPMU_PCR_PJ_AXISD;		/* set AXISDD bit */
-		apcr |= MPMU_PCR_PJ_DDRCORSD;		/* set DDRCORSD bit */
-		idle_cfg |= APMU_PJ_IDLE_CFG_PJ_PWRDWN;	/* PJ power down */
-		apcr |= MPMU_PCR_PJ_SPSD;
-		fallthrough;
-	case POWER_MODE_CORE_EXTIDLE:
-		idle_cfg |= APMU_PJ_IDLE_CFG_PJ_IDLE;	/* set the IDLE bit */
-		idle_cfg &= ~APMU_PJ_IDLE_CFG_ISO_MODE_CNTRL_MASK;
-		idle_cfg |= APMU_PJ_IDLE_CFG_PWR_SW(3)
-			| APMU_PJ_IDLE_CFG_L2_PWR_SW;
-		break;
-	case POWER_MODE_CORE_INTIDLE:
-		apcr &= ~MPMU_PCR_PJ_SPSD;
-		break;
-	}
-
-	/* set reserve bits */
-	apcr |= (1 << 30) | (1 << 25);
-
-	/* finally write the registers back */
-	__raw_writel(idle_cfg, APMU_PJ_IDLE_CFG);
-	__raw_writel(apcr, MPMU_PCR_PJ);	/* 0xfe086000 */
-}
-
-static int mmp2_pm_enter(suspend_state_t state)
-{
-	int temp;
-
-	temp = __raw_readl(MMP2_ICU_INT4_MASK);
-	if (temp & (1 << 1)) {
-		printk(KERN_ERR "%s: PMIC interrupt is handling\n", __func__);
-		return -EAGAIN;
-	}
-
-	temp = __raw_readl(APMU_SRAM_PWR_DWN);
-	temp |= ((1 << 19) | (1 << 18));
-	__raw_writel(temp, APMU_SRAM_PWR_DWN);
-	pm_mpmu_clk_disable();
-	pm_scu_clk_disable();
-
-	printk(KERN_INFO "%s: before suspend\n", __func__);
-	cpu_do_idle();
-	printk(KERN_INFO "%s: after suspend\n", __func__);
-
-	pm_mpmu_clk_enable();		/* enable clocks in MPMU */
-	pm_scu_clk_enable();		/* enable clocks in SCU */
-
-	return 0;
-}
-
-/*
- * Called after processes are frozen, but before we shut down devices.
- */
-static int mmp2_pm_prepare(void)
-{
-	mmp2_pm_enter_lowpower_mode(POWER_MODE_SYS_SLEEP);
-
-	return 0;
-}
-
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-static void mmp2_pm_finish(void)
-{
-	mmp2_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE);
-}
-
-static int mmp2_pm_valid(suspend_state_t state)
-{
-	return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM));
-}
-
-/*
- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
- */
-static const struct platform_suspend_ops mmp2_pm_ops = {
-	.valid		= mmp2_pm_valid,
-	.prepare	= mmp2_pm_prepare,
-	.enter		= mmp2_pm_enter,
-	.finish		= mmp2_pm_finish,
-};
-
-static int __init mmp2_pm_init(void)
-{
-	uint32_t apcr;
-
-	if (!cpu_is_mmp2())
-		return -EIO;
-
-	suspend_set_ops(&mmp2_pm_ops);
-
-	/*
-	 * Set bit 0, Slow clock Select 32K clock input instead of VCXO
-	 * VCXO is chosen by default, which would be disabled in suspend
-	 */
-	__raw_writel(0x5, MPMU_SCCR);
-
-	/*
-	 * Clear bit 23 of CIU_CPU_CONF
-	 * direct PJ4 to DDR access through Memory Controller slow queue
-	 * fast queue has issue and cause lcd will flick
-	 */
-	__raw_writel(__raw_readl(CIU_REG(0x8)) & ~(0x1 << 23), CIU_REG(0x8));
-
-	/* Clear default low power control bit */
-	apcr = __raw_readl(MPMU_PCR_PJ);
-	apcr &= ~(MPMU_PCR_PJ_SLPEN | MPMU_PCR_PJ_DDRCORSD
-			| MPMU_PCR_PJ_APBSD | MPMU_PCR_PJ_AXISD | 1 << 13);
-	__raw_writel(apcr, MPMU_PCR_PJ);
-
-	return 0;
-}
-
-late_initcall(mmp2_pm_init);
diff --git a/arch/arm/mach-mmp/pm-mmp2.h b/arch/arm/mach-mmp/pm-mmp2.h
deleted file mode 100644
index 70299a9450d3..000000000000
--- a/arch/arm/mach-mmp/pm-mmp2.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * MMP2 Power Management Routines
- *
- * (C) Copyright 2010 Marvell International Ltd.
- * All Rights Reserved
- */
-
-#ifndef __MMP2_PM_H__
-#define __MMP2_PM_H__
-
-#include "addr-map.h"
-
-#define APMU_PJ_IDLE_CFG			APMU_REG(0x018)
-#define APMU_PJ_IDLE_CFG_PJ_IDLE		(1 << 1)
-#define APMU_PJ_IDLE_CFG_PJ_PWRDWN		(1 << 5)
-#define APMU_PJ_IDLE_CFG_PWR_SW(x)		((x) << 16)
-#define APMU_PJ_IDLE_CFG_L2_PWR_SW		(1 << 19)
-#define APMU_PJ_IDLE_CFG_ISO_MODE_CNTRL_MASK	(3 << 28)
-
-#define APMU_SRAM_PWR_DWN			APMU_REG(0x08c)
-
-#define MPMU_SCCR				MPMU_REG(0x038)
-#define MPMU_PCR_PJ				MPMU_REG(0x1000)
-#define MPMU_PCR_PJ_AXISD			(1 << 31)
-#define MPMU_PCR_PJ_SLPEN			(1 << 29)
-#define MPMU_PCR_PJ_SPSD			(1 << 28)
-#define MPMU_PCR_PJ_DDRCORSD			(1 << 27)
-#define MPMU_PCR_PJ_APBSD			(1 << 26)
-#define MPMU_PCR_PJ_INTCLR			(1 << 24)
-#define MPMU_PCR_PJ_SLPWP0			(1 << 23)
-#define MPMU_PCR_PJ_SLPWP1			(1 << 22)
-#define MPMU_PCR_PJ_SLPWP2			(1 << 21)
-#define MPMU_PCR_PJ_SLPWP3			(1 << 20)
-#define MPMU_PCR_PJ_VCTCXOSD			(1 << 19)
-#define MPMU_PCR_PJ_SLPWP4			(1 << 18)
-#define MPMU_PCR_PJ_SLPWP5			(1 << 17)
-#define MPMU_PCR_PJ_SLPWP6			(1 << 16)
-#define MPMU_PCR_PJ_SLPWP7			(1 << 15)
-
-#define MPMU_PLL2_CTRL1				MPMU_REG(0x0414)
-#define MPMU_CGR_PJ				MPMU_REG(0x1024)
-#define MPMU_WUCRM_PJ				MPMU_REG(0x104c)
-#define MPMU_WUCRM_PJ_WAKEUP(x)			(1 << (x))
-#define MPMU_WUCRM_PJ_RTC_ALARM			(1 << 17)
-
-enum {
-	POWER_MODE_ACTIVE = 0,
-	POWER_MODE_CORE_INTIDLE,
-	POWER_MODE_CORE_EXTIDLE,
-	POWER_MODE_APPS_IDLE,
-	POWER_MODE_APPS_SLEEP,
-	POWER_MODE_CHIP_SLEEP,
-	POWER_MODE_SYS_SLEEP,
-};
-
-extern void mmp2_pm_enter_lowpower_mode(int state);
-extern int mmp2_set_wake(struct irq_data *d, unsigned int on);
-#endif
diff --git a/arch/arm/mach-mmp/pm-pxa910.c b/arch/arm/mach-mmp/pm-pxa910.c
deleted file mode 100644
index 1d71d73c1862..000000000000
--- a/arch/arm/mach-mmp/pm-pxa910.c
+++ /dev/null
@@ -1,272 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * PXA910 Power Management Routines
- *
- * (C) Copyright 2009 Marvell International Ltd.
- * All Rights Reserved
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/suspend.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <asm/mach-types.h>
-#include <asm/outercache.h>
-
-#include <linux/soc/mmp/cputype.h>
-#include "addr-map.h"
-#include "pm-pxa910.h"
-#include "regs-icu.h"
-#include "irqs.h"
-
-int pxa910_set_wake(struct irq_data *data, unsigned int on)
-{
-	uint32_t awucrm = 0, apcr = 0;
-	int irq = data->irq;
-
-	/* setting wakeup sources */
-	switch (irq) {
-	/* wakeup line 2 */
-	case IRQ_PXA910_AP_GPIO:
-		awucrm = MPMU_AWUCRM_WAKEUP(2);
-		apcr |= MPMU_APCR_SLPWP2;
-		break;
-	/* wakeup line 3 */
-	case IRQ_PXA910_KEYPAD:
-		awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_KEYPRESS;
-		apcr |= MPMU_APCR_SLPWP3;
-		break;
-	case IRQ_PXA910_ROTARY:
-		awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_NEWROTARY;
-		apcr |= MPMU_APCR_SLPWP3;
-		break;
-	case IRQ_PXA910_TRACKBALL:
-		awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_TRACKBALL;
-		apcr |= MPMU_APCR_SLPWP3;
-		break;
-	/* wakeup line 4 */
-	case IRQ_PXA910_AP1_TIMER1:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_1;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_AP1_TIMER2:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_2;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_AP1_TIMER3:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_3;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_AP2_TIMER1:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_1;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_AP2_TIMER2:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_2;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_AP2_TIMER3:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_3;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_RTC_ALARM:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_RTC_ALARM;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	/* wakeup line 5 */
-	case IRQ_PXA910_USB1:
-	case IRQ_PXA910_USB2:
-		awucrm = MPMU_AWUCRM_WAKEUP(5);
-		apcr |= MPMU_APCR_SLPWP5;
-		break;
-	/* wakeup line 6 */
-	case IRQ_PXA910_MMC:
-		awucrm = MPMU_AWUCRM_WAKEUP(6)
-			| MPMU_AWUCRM_SDH1
-			| MPMU_AWUCRM_SDH2;
-		apcr |= MPMU_APCR_SLPWP6;
-		break;
-	/* wakeup line 7 */
-	case IRQ_PXA910_PMIC_INT:
-		awucrm = MPMU_AWUCRM_WAKEUP(7);
-		apcr |= MPMU_APCR_SLPWP7;
-		break;
-	default:
-		if (irq >= IRQ_GPIO_START && irq < IRQ_BOARD_START) {
-			awucrm = MPMU_AWUCRM_WAKEUP(2);
-			apcr |= MPMU_APCR_SLPWP2;
-		} else {
-			/* FIXME: This should return a proper error code ! */
-			printk(KERN_ERR "Error: no defined wake up source irq: %d\n",
-				irq);
-		}
-	}
-
-	if (on) {
-		if (awucrm) {
-			awucrm |= __raw_readl(MPMU_AWUCRM);
-			__raw_writel(awucrm, MPMU_AWUCRM);
-		}
-		if (apcr) {
-			apcr = ~apcr & __raw_readl(MPMU_APCR);
-			__raw_writel(apcr, MPMU_APCR);
-		}
-	} else {
-		if (awucrm) {
-			awucrm = ~awucrm & __raw_readl(MPMU_AWUCRM);
-			__raw_writel(awucrm, MPMU_AWUCRM);
-		}
-		if (apcr) {
-			apcr |= __raw_readl(MPMU_APCR);
-			__raw_writel(apcr, MPMU_APCR);
-		}
-	}
-	return 0;
-}
-
-void pxa910_pm_enter_lowpower_mode(int state)
-{
-	uint32_t idle_cfg, apcr;
-
-	idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
-	apcr = __raw_readl(MPMU_APCR);
-
-	apcr &= ~(MPMU_APCR_DDRCORSD | MPMU_APCR_APBSD | MPMU_APCR_AXISD
-		| MPMU_APCR_VCTCXOSD | MPMU_APCR_STBYEN);
-	idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_IDLE
-		| APMU_MOH_IDLE_CFG_MOH_PWRDWN);
-
-	switch (state) {
-	case POWER_MODE_UDR:
-		/* only shutdown APB in UDR */
-		apcr |= MPMU_APCR_STBYEN | MPMU_APCR_APBSD;
-		fallthrough;
-	case POWER_MODE_SYS_SLEEP:
-		apcr |= MPMU_APCR_SLPEN;		/* set the SLPEN bit */
-		apcr |= MPMU_APCR_VCTCXOSD;		/* set VCTCXOSD */
-		fallthrough;
-	case POWER_MODE_APPS_SLEEP:
-		apcr |= MPMU_APCR_DDRCORSD;		/* set DDRCORSD */
-		fallthrough;
-	case POWER_MODE_APPS_IDLE:
-		apcr |= MPMU_APCR_AXISD;		/* set AXISDD bit */
-		fallthrough;
-	case POWER_MODE_CORE_EXTIDLE:
-		idle_cfg |= APMU_MOH_IDLE_CFG_MOH_IDLE;
-		idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN;
-		idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWR_SW(3)
-			| APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(3);
-		fallthrough;
-	case POWER_MODE_CORE_INTIDLE:
-		break;
-	}
-
-	/* program the memory controller hardware sleep type and auto wakeup */
-	idle_cfg |= APMU_MOH_IDLE_CFG_MOH_DIS_MC_SW_REQ;
-	idle_cfg |= APMU_MOH_IDLE_CFG_MOH_MC_WAKE_EN;
-	__raw_writel(0x0, APMU_MC_HW_SLP_TYPE);		/* auto refresh */
-
-	/* set DSPSD, DTCMSD, BBSD, MSASLPEN */
-	apcr |= MPMU_APCR_DSPSD | MPMU_APCR_DTCMSD | MPMU_APCR_BBSD
-		| MPMU_APCR_MSASLPEN;
-
-	/*always set SLEPEN bit mainly for MSA*/
-	apcr |= MPMU_APCR_SLPEN;
-
-	/* finally write the registers back */
-	__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
-	__raw_writel(apcr, MPMU_APCR);
-
-}
-
-static int pxa910_pm_enter(suspend_state_t state)
-{
-	unsigned int idle_cfg, reg = 0;
-
-	/*pmic thread not completed,exit;otherwise system can't be waked up*/
-	reg = __raw_readl(ICU_INT_CONF(IRQ_PXA910_PMIC_INT));
-	if ((reg & 0x3) == 0)
-		return -EAGAIN;
-
-	idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
-	idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN
-		| APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN;
-	__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
-
-	/* disable L2 */
-	outer_disable();
-	/* wait for l2 idle */
-	while (!(readl(CIU_REG(0x8)) & (1 << 16)))
-		udelay(1);
-
-	cpu_do_idle();
-
-	/* enable L2 */
-	outer_resume();
-	/* wait for l2 idle */
-	while (!(readl(CIU_REG(0x8)) & (1 << 16)))
-		udelay(1);
-
-	idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
-	idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_PWRDWN
-		| APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN);
-	__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
-
-	return 0;
-}
-
-/*
- * Called after processes are frozen, but before we shut down devices.
- */
-static int pxa910_pm_prepare(void)
-{
-	pxa910_pm_enter_lowpower_mode(POWER_MODE_UDR);
-	return 0;
-}
-
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-static void pxa910_pm_finish(void)
-{
-	pxa910_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE);
-}
-
-static int pxa910_pm_valid(suspend_state_t state)
-{
-	return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM));
-}
-
-static const struct platform_suspend_ops pxa910_pm_ops = {
-	.valid		= pxa910_pm_valid,
-	.prepare	= pxa910_pm_prepare,
-	.enter		= pxa910_pm_enter,
-	.finish		= pxa910_pm_finish,
-};
-
-static int __init pxa910_pm_init(void)
-{
-	uint32_t awucrm = 0;
-
-	if (!cpu_is_pxa910())
-		return -EIO;
-
-	suspend_set_ops(&pxa910_pm_ops);
-
-	/* Set the following bits for MMP3 playback with VCTXO on */
-	__raw_writel(__raw_readl(APMU_SQU_CLK_GATE_CTRL) | (1 << 30),
-		APMU_SQU_CLK_GATE_CTRL);
-	__raw_writel(__raw_readl(MPMU_FCCR) | (1 << 28), MPMU_FCCR);
-
-	awucrm |= MPMU_AWUCRM_AP_ASYNC_INT | MPMU_AWUCRM_AP_FULL_IDLE;
-	__raw_writel(awucrm, MPMU_AWUCRM);
-
-	return 0;
-}
-
-late_initcall(pxa910_pm_init);
diff --git a/arch/arm/mach-mmp/pm-pxa910.h b/arch/arm/mach-mmp/pm-pxa910.h
deleted file mode 100644
index 8e6344adaf51..000000000000
--- a/arch/arm/mach-mmp/pm-pxa910.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * PXA910 Power Management Routines
- *
- * (C) Copyright 2009 Marvell International Ltd.
- * All Rights Reserved
- */
-
-#ifndef __PXA910_PM_H__
-#define __PXA910_PM_H__
-
-#define APMU_MOH_IDLE_CFG			APMU_REG(0x0018)
-#define APMU_MOH_IDLE_CFG_MOH_IDLE		(1 << 1)
-#define APMU_MOH_IDLE_CFG_MOH_PWRDWN		(1 << 5)
-#define APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN	(1 << 6)
-#define APMU_MOH_IDLE_CFG_MOH_PWR_SW(x)		(((x) & 0x3) << 16)
-#define APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(x)	(((x) & 0x3) << 18)
-#define APMU_MOH_IDLE_CFG_MOH_DIS_MC_SW_REQ	(1 << 21)
-#define APMU_MOH_IDLE_CFG_MOH_MC_WAKE_EN	(1 << 20)
-
-#define APMU_SQU_CLK_GATE_CTRL			APMU_REG(0x001c)
-#define APMU_MC_HW_SLP_TYPE			APMU_REG(0x00b0)
-
-#define MPMU_FCCR				MPMU_REG(0x0008)
-#define MPMU_APCR				MPMU_REG(0x1000)
-#define MPMU_APCR_AXISD				(1 << 31)
-#define MPMU_APCR_DSPSD				(1 << 30)
-#define MPMU_APCR_SLPEN				(1 << 29)
-#define MPMU_APCR_DTCMSD			(1 << 28)
-#define MPMU_APCR_DDRCORSD			(1 << 27)
-#define MPMU_APCR_APBSD				(1 << 26)
-#define MPMU_APCR_BBSD				(1 << 25)
-#define MPMU_APCR_SLPWP0			(1 << 23)
-#define MPMU_APCR_SLPWP1			(1 << 22)
-#define MPMU_APCR_SLPWP2			(1 << 21)
-#define MPMU_APCR_SLPWP3			(1 << 20)
-#define MPMU_APCR_VCTCXOSD			(1 << 19)
-#define MPMU_APCR_SLPWP4			(1 << 18)
-#define MPMU_APCR_SLPWP5			(1 << 17)
-#define MPMU_APCR_SLPWP6			(1 << 16)
-#define MPMU_APCR_SLPWP7			(1 << 15)
-#define MPMU_APCR_MSASLPEN			(1 << 14)
-#define MPMU_APCR_STBYEN			(1 << 13)
-
-#define MPMU_AWUCRM				MPMU_REG(0x104c)
-#define MPMU_AWUCRM_AP_ASYNC_INT		(1 << 25)
-#define MPMU_AWUCRM_AP_FULL_IDLE		(1 << 24)
-#define MPMU_AWUCRM_SDH1			(1 << 23)
-#define MPMU_AWUCRM_SDH2			(1 << 22)
-#define MPMU_AWUCRM_KEYPRESS			(1 << 21)
-#define MPMU_AWUCRM_TRACKBALL			(1 << 20)
-#define MPMU_AWUCRM_NEWROTARY			(1 << 19)
-#define MPMU_AWUCRM_RTC_ALARM			(1 << 17)
-#define MPMU_AWUCRM_AP2_TIMER_3			(1 << 13)
-#define MPMU_AWUCRM_AP2_TIMER_2			(1 << 12)
-#define MPMU_AWUCRM_AP2_TIMER_1			(1 << 11)
-#define MPMU_AWUCRM_AP1_TIMER_3			(1 << 10)
-#define MPMU_AWUCRM_AP1_TIMER_2			(1 << 9)
-#define MPMU_AWUCRM_AP1_TIMER_1			(1 << 8)
-#define MPMU_AWUCRM_WAKEUP(x)			(1 << ((x) & 0x7))
-
-enum {
-	POWER_MODE_ACTIVE = 0,
-	POWER_MODE_CORE_INTIDLE,
-	POWER_MODE_CORE_EXTIDLE,
-	POWER_MODE_APPS_IDLE,
-	POWER_MODE_APPS_SLEEP,
-	POWER_MODE_SYS_SLEEP,
-	POWER_MODE_HIBERNATE,
-	POWER_MODE_UDR,
-};
-
-extern int pxa910_set_wake(struct irq_data *data, unsigned int on);
-
-#endif
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
deleted file mode 100644
index 1e9389245d0e..000000000000
--- a/arch/arm/mach-mmp/pxa168.c
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/pxa168.c
- *
- *  Code specific to PXA168
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clk/mmp.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/mv_usb.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/mach/time.h>
-#include <asm/system_misc.h>
-
-#include "addr-map.h"
-#include "common.h"
-#include <linux/soc/mmp/cputype.h>
-#include "devices.h"
-#include "irqs.h"
-#include "mfp.h"
-#include "pxa168.h"
-#include "regs-apbc.h"
-#include "regs-apmu.h"
-#include "regs-usb.h"
-
-#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
-
-static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata =
-{
-	MFP_ADDR_X(GPIO0,   GPIO36,  0x04c),
-	MFP_ADDR_X(GPIO37,  GPIO55,  0x000),
-	MFP_ADDR_X(GPIO56,  GPIO123, 0x0e0),
-	MFP_ADDR_X(GPIO124, GPIO127, 0x0f4),
-
-	MFP_ADDR_END,
-};
-
-void __init pxa168_init_irq(void)
-{
-	icu_init_irq();
-}
-
-static int __init pxa168_init(void)
-{
-	if (cpu_is_pxa168()) {
-		mfp_init_base(MFPR_VIRT_BASE);
-		mfp_init_addr(pxa168_mfp_addr_map);
-		pxa168_clk_init(APB_PHYS_BASE + 0x50000,
-				AXI_PHYS_BASE + 0x82800,
-				APB_PHYS_BASE + 0x15000);
-	}
-
-	return 0;
-}
-postcore_initcall(pxa168_init);
-
-/* system timer - clock enabled, 3.25MHz */
-#define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
-#define APBC_TIMERS	APBC_REG(0x34)
-
-void __init pxa168_timer_init(void)
-{
-	/* this is early, we have to initialize the CCU registers by
-	 * ourselves instead of using clk_* API. Clock rate is defined
-	 * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running
-	 */
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
-
-	/* 3.25MHz, bus/functional clock enabled, release reset */
-	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
-
-	mmp_timer_init(IRQ_PXA168_TIMER1, 3250000);
-}
-
-void pxa168_clear_keypad_wakeup(void)
-{
-	uint32_t val;
-	uint32_t mask = APMU_PXA168_KP_WAKE_CLR;
-
-	/* wake event clear is needed in order to clear keypad interrupt */
-	val = __raw_readl(APMU_WAKE_CLR);
-	__raw_writel(val |  mask, APMU_WAKE_CLR);
-}
-
-/* on-chip devices */
-PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
-PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
-PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23, 24);
-PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
-PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
-PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
-PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
-PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
-PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
-PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
-PXA168_DEVICE(ssp1, "pxa168-ssp", 0, SSP1, 0xd401b000, 0x40, 52, 53);
-PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55);
-PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
-PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
-PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
-PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
-PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
-PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
-
-struct resource pxa168_resource_gpio[] = {
-	{
-		.start	= 0xd4019000,
-		.end	= 0xd4019fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PXA168_GPIOX,
-		.end	= IRQ_PXA168_GPIOX,
-		.name	= "gpio_mux",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_gpio = {
-	.name		= "mmp-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa168_resource_gpio),
-	.resource	= pxa168_resource_gpio,
-};
-
-struct resource pxa168_usb_host_resources[] = {
-	/* USB Host conroller register base */
-	[0] = {
-		.start	= PXA168_U2H_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2H_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* USB PHY register base */
-	[1] = {
-		.start	= PXA168_U2H_PHYBASE,
-		.end	= PXA168_U2H_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB2,
-		.end	= IRQ_PXA168_USB2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
-struct platform_device pxa168_device_usb_host = {
-	.name = "pxa-sph",
-	.id   = -1,
-	.dev  = {
-		.dma_mask = &pxa168_usb_host_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-
-	.num_resources = ARRAY_SIZE(pxa168_usb_host_resources),
-	.resource      = pxa168_usb_host_resources,
-};
-
-int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata)
-{
-	pxa168_device_usb_host.dev.platform_data = pdata;
-	return platform_device_register(&pxa168_device_usb_host);
-}
-
-void pxa168_restart(enum reboot_mode mode, const char *cmd)
-{
-	soft_restart(0xffff0000);
-}
diff --git a/arch/arm/mach-mmp/pxa168.h b/arch/arm/mach-mmp/pxa168.h
deleted file mode 100644
index dff651b9f252..000000000000
--- a/arch/arm/mach-mmp/pxa168.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_PXA168_H
-#define __ASM_MACH_PXA168_H
-
-#include <linux/reboot.h>
-
-extern void pxa168_timer_init(void);
-extern void __init icu_init_irq(void);
-extern void __init pxa168_init_irq(void);
-extern void pxa168_restart(enum reboot_mode, const char *);
-extern void pxa168_clear_keypad_wakeup(void);
-
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include <video/pxa168fb.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/pxa168_eth.h>
-#include <linux/platform_data/mv_usb.h>
-#include <linux/soc/mmp/cputype.h>
-
-#include "devices.h"
-
-extern struct pxa_device_desc pxa168_device_uart1;
-extern struct pxa_device_desc pxa168_device_uart2;
-extern struct pxa_device_desc pxa168_device_uart3;
-extern struct pxa_device_desc pxa168_device_twsi0;
-extern struct pxa_device_desc pxa168_device_twsi1;
-extern struct pxa_device_desc pxa168_device_pwm1;
-extern struct pxa_device_desc pxa168_device_pwm2;
-extern struct pxa_device_desc pxa168_device_pwm3;
-extern struct pxa_device_desc pxa168_device_pwm4;
-extern struct pxa_device_desc pxa168_device_ssp1;
-extern struct pxa_device_desc pxa168_device_ssp2;
-extern struct pxa_device_desc pxa168_device_ssp3;
-extern struct pxa_device_desc pxa168_device_ssp4;
-extern struct pxa_device_desc pxa168_device_ssp5;
-extern struct pxa_device_desc pxa168_device_nand;
-extern struct pxa_device_desc pxa168_device_fb;
-extern struct pxa_device_desc pxa168_device_keypad;
-extern struct pxa_device_desc pxa168_device_eth;
-
-/* pdata can be NULL */
-extern int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata);
-
-
-extern struct platform_device pxa168_device_gpio;
-
-static inline int pxa168_add_uart(int id)
-{
-	struct pxa_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa168_device_uart1; break;
-	case 2: d = &pxa168_device_uart2; break;
-	case 3: d = &pxa168_device_uart3; break;
-	}
-
-	if (d == NULL)
-		return -EINVAL;
-
-	return pxa_register_device(d, NULL, 0);
-}
-
-static inline int pxa168_add_twsi(int id, struct i2c_pxa_platform_data *data,
-				  struct i2c_board_info *info, unsigned size)
-{
-	struct pxa_device_desc *d = NULL;
-	int ret;
-
-	switch (id) {
-	case 0: d = &pxa168_device_twsi0; break;
-	case 1: d = &pxa168_device_twsi1; break;
-	default:
-		return -EINVAL;
-	}
-
-	ret = i2c_register_board_info(id, info, size);
-	if (ret)
-		return ret;
-
-	return pxa_register_device(d, data, sizeof(*data));
-}
-
-static inline int pxa168_add_pwm(int id)
-{
-	struct pxa_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa168_device_pwm1; break;
-	case 2: d = &pxa168_device_pwm2; break;
-	case 3: d = &pxa168_device_pwm3; break;
-	case 4: d = &pxa168_device_pwm4; break;
-	default:
-		return -EINVAL;
-	}
-
-	return pxa_register_device(d, NULL, 0);
-}
-
-static inline int pxa168_add_ssp(int id)
-{
-	struct pxa_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa168_device_ssp1; break;
-	case 2: d = &pxa168_device_ssp2; break;
-	case 3: d = &pxa168_device_ssp3; break;
-	case 4: d = &pxa168_device_ssp4; break;
-	case 5: d = &pxa168_device_ssp5; break;
-	default:
-		return -EINVAL;
-	}
-	return pxa_register_device(d, NULL, 0);
-}
-
-static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
-{
-	return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
-}
-
-static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi)
-{
-	return pxa_register_device(&pxa168_device_fb, mi, sizeof(*mi));
-}
-
-static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data)
-{
-	if (cpu_is_pxa168())
-		data->clear_wakeup_event = pxa168_clear_keypad_wakeup;
-
-	return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data));
-}
-
-static inline int pxa168_add_eth(struct pxa168_eth_platform_data *data)
-{
-	return pxa_register_device(&pxa168_device_eth, data, sizeof(*data));
-}
-#endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
deleted file mode 100644
index b19a069d9fab..000000000000
--- a/arch/arm/mach-mmp/pxa910.c
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/pxa910.c
- *
- *  Code specific to PXA910
- */
-#include <linux/clk/mmp.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqchip/mmp.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware/cache-tauros2.h>
-#include <asm/mach/time.h>
-#include "addr-map.h"
-#include "regs-apbc.h"
-#include <linux/soc/mmp/cputype.h>
-#include "irqs.h"
-#include "mfp.h"
-#include "devices.h"
-#include "pm-pxa910.h"
-#include "pxa910.h"
-
-#include "common.h"
-
-#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
-
-static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
-{
-	MFP_ADDR_X(GPIO0, GPIO54, 0xdc),
-	MFP_ADDR_X(GPIO67, GPIO98, 0x1b8),
-	MFP_ADDR_X(GPIO100, GPIO109, 0x238),
-
-	MFP_ADDR(GPIO123, 0xcc),
-	MFP_ADDR(GPIO124, 0xd0),
-
-	MFP_ADDR(DF_IO0, 0x40),
-	MFP_ADDR(DF_IO1, 0x3c),
-	MFP_ADDR(DF_IO2, 0x38),
-	MFP_ADDR(DF_IO3, 0x34),
-	MFP_ADDR(DF_IO4, 0x30),
-	MFP_ADDR(DF_IO5, 0x2c),
-	MFP_ADDR(DF_IO6, 0x28),
-	MFP_ADDR(DF_IO7, 0x24),
-	MFP_ADDR(DF_IO8, 0x20),
-	MFP_ADDR(DF_IO9, 0x1c),
-	MFP_ADDR(DF_IO10, 0x18),
-	MFP_ADDR(DF_IO11, 0x14),
-	MFP_ADDR(DF_IO12, 0x10),
-	MFP_ADDR(DF_IO13, 0xc),
-	MFP_ADDR(DF_IO14, 0x8),
-	MFP_ADDR(DF_IO15, 0x4),
-
-	MFP_ADDR(DF_nCS0_SM_nCS2, 0x44),
-	MFP_ADDR(DF_nCS1_SM_nCS3, 0x48),
-	MFP_ADDR(SM_nCS0, 0x4c),
-	MFP_ADDR(SM_nCS1, 0x50),
-	MFP_ADDR(DF_WEn, 0x54),
-	MFP_ADDR(DF_REn, 0x58),
-	MFP_ADDR(DF_CLE_SM_OEn, 0x5c),
-	MFP_ADDR(DF_ALE_SM_WEn, 0x60),
-	MFP_ADDR(SM_SCLK, 0x64),
-	MFP_ADDR(DF_RDY0, 0x68),
-	MFP_ADDR(SM_BE0, 0x6c),
-	MFP_ADDR(SM_BE1, 0x70),
-	MFP_ADDR(SM_ADV, 0x74),
-	MFP_ADDR(DF_RDY1, 0x78),
-	MFP_ADDR(SM_ADVMUX, 0x7c),
-	MFP_ADDR(SM_RDY, 0x80),
-
-	MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84),
-
-	MFP_ADDR_END,
-};
-
-void __init pxa910_init_irq(void)
-{
-	icu_init_irq();
-#ifdef CONFIG_PM
-	icu_irq_chip.irq_set_wake = pxa910_set_wake;
-#endif
-}
-
-static int __init pxa910_init(void)
-{
-	if (cpu_is_pxa910()) {
-#ifdef CONFIG_CACHE_TAUROS2
-		tauros2_init(0);
-#endif
-		mfp_init_base(MFPR_VIRT_BASE);
-		mfp_init_addr(pxa910_mfp_addr_map);
-		pxa910_clk_init(APB_PHYS_BASE + 0x50000,
-				AXI_PHYS_BASE + 0x82800,
-				APB_PHYS_BASE + 0x15000,
-				APB_PHYS_BASE + 0x3b000);
-	}
-
-	return 0;
-}
-postcore_initcall(pxa910_init);
-
-/* system timer - clock enabled, 3.25MHz */
-#define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
-#define APBC_TIMERS	APBC_REG(0x34)
-
-void __init pxa910_timer_init(void)
-{
-	/* reset and configure */
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
-	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
-
-	mmp_timer_init(IRQ_PXA910_AP1_TIMER1, 3250000);
-}
-
-/* on-chip devices */
-
-/* NOTE: there are totally 3 UARTs on PXA910:
- *
- *   UART1   - Slow UART (can be used both by AP and CP)
- *   UART2/3 - Fast UART
- *
- * To be backward compatible with the legacy FFUART/BTUART/STUART sequence,
- * they are re-ordered as:
- *
- *   pxa910_device_uart1 - UART2 as FFUART
- *   pxa910_device_uart2 - UART3 as BTUART
- *
- * UART1 is not used by AP for the moment.
- */
-PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
-PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
-PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
-PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
-PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
-PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
-PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
-PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
-PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
-PXA910_DEVICE(disp, "mmp-disp", 0, LCD, 0xd420b000, 0x1ec);
-PXA910_DEVICE(fb, "mmp-fb", -1, NONE, 0, 0);
-PXA910_DEVICE(panel, "tpo-hvga", -1, NONE, 0, 0);
-
-struct resource pxa910_resource_gpio[] = {
-	{
-		.start	= 0xd4019000,
-		.end	= 0xd4019fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PXA910_AP_GPIO,
-		.end	= IRQ_PXA910_AP_GPIO,
-		.name	= "gpio_mux",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa910_device_gpio = {
-	.name		= "mmp-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa910_resource_gpio),
-	.resource	= pxa910_resource_gpio,
-};
-
-static struct resource pxa910_resource_rtc[] = {
-	{
-		.start	= 0xd4010000,
-		.end	= 0xd401003f,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PXA910_RTC_INT,
-		.end	= IRQ_PXA910_RTC_INT,
-		.name	= "rtc 1Hz",
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= IRQ_PXA910_RTC_ALARM,
-		.end	= IRQ_PXA910_RTC_ALARM,
-		.name	= "rtc alarm",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa910_device_rtc = {
-	.name		= "sa1100-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa910_resource_rtc),
-	.resource	= pxa910_resource_rtc,
-};
diff --git a/arch/arm/mach-mmp/pxa910.h b/arch/arm/mach-mmp/pxa910.h
deleted file mode 100644
index 2dfe38e4acc1..000000000000
--- a/arch/arm/mach-mmp/pxa910.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_PXA910_H
-#define __ASM_MACH_PXA910_H
-
-extern void pxa910_timer_init(void);
-extern void __init icu_init_irq(void);
-extern void __init pxa910_init_irq(void);
-
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include <video/mmp_disp.h>
-
-#include "devices.h"
-
-extern struct pxa_device_desc pxa910_device_uart1;
-extern struct pxa_device_desc pxa910_device_uart2;
-extern struct pxa_device_desc pxa910_device_twsi0;
-extern struct pxa_device_desc pxa910_device_twsi1;
-extern struct pxa_device_desc pxa910_device_pwm1;
-extern struct pxa_device_desc pxa910_device_pwm2;
-extern struct pxa_device_desc pxa910_device_pwm3;
-extern struct pxa_device_desc pxa910_device_pwm4;
-extern struct pxa_device_desc pxa910_device_nand;
-extern struct platform_device pxa168_device_usb_phy;
-extern struct platform_device pxa168_device_u2o;
-extern struct platform_device pxa168_device_u2ootg;
-extern struct platform_device pxa168_device_u2oehci;
-extern struct pxa_device_desc pxa910_device_disp;
-extern struct pxa_device_desc pxa910_device_fb;
-extern struct pxa_device_desc pxa910_device_panel;
-extern struct platform_device pxa910_device_gpio;
-extern struct platform_device pxa910_device_rtc;
-
-static inline int pxa910_add_uart(int id)
-{
-	struct pxa_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa910_device_uart1; break;
-	case 2: d = &pxa910_device_uart2; break;
-	}
-
-	if (d == NULL)
-		return -EINVAL;
-
-	return pxa_register_device(d, NULL, 0);
-}
-
-static inline int pxa910_add_twsi(int id, struct i2c_pxa_platform_data *data,
-				  struct i2c_board_info *info, unsigned size)
-{
-	struct pxa_device_desc *d = NULL;
-	int ret;
-
-	switch (id) {
-	case 0: d = &pxa910_device_twsi0; break;
-	case 1: d = &pxa910_device_twsi1; break;
-	default:
-		return -EINVAL;
-	}
-
-	ret = i2c_register_board_info(id, info, size);
-	if (ret)
-		return ret;
-
-	return pxa_register_device(d, data, sizeof(*data));
-}
-
-static inline int pxa910_add_pwm(int id)
-{
-	struct pxa_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa910_device_pwm1; break;
-	case 2: d = &pxa910_device_pwm2; break;
-	case 3: d = &pxa910_device_pwm3; break;
-	case 4: d = &pxa910_device_pwm4; break;
-	default:
-		return -EINVAL;
-	}
-
-	return pxa_register_device(d, NULL, 0);
-}
-
-static inline int pxa910_add_nand(struct pxa3xx_nand_platform_data *info)
-{
-	return pxa_register_device(&pxa910_device_nand, info, sizeof(*info));
-}
-#endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/regs-apbc.h b/arch/arm/mach-mmp/regs-apbc.h
deleted file mode 100644
index d0d00c2cce38..000000000000
--- a/arch/arm/mach-mmp/regs-apbc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *   Application Peripheral Bus Clock Unit
- */
-
-#ifndef __ASM_MACH_REGS_APBC_H
-#define __ASM_MACH_REGS_APBC_H
-
-#include "addr-map.h"
-
-/* Common APB clock register bit definitions */
-#define APBC_APBCLK	(1 << 0)  /* APB Bus Clock Enable */
-#define APBC_FNCLK	(1 << 1)  /* Functional Clock Enable */
-#define APBC_RST	(1 << 2)  /* Reset Generation */
-
-/* Functional Clock Selection Mask */
-#define APBC_FNCLKSEL(x)	(((x) & 0xf) << 4)
-
-#endif /* __ASM_MACH_REGS_APBC_H */
diff --git a/arch/arm/mach-mmp/regs-apmu.h b/arch/arm/mach-mmp/regs-apmu.h
deleted file mode 100644
index e36f6503adfb..000000000000
--- a/arch/arm/mach-mmp/regs-apmu.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *   Application Subsystem Power Management Unit
- */
-
-#ifndef __ASM_MACH_REGS_APMU_H
-#define __ASM_MACH_REGS_APMU_H
-
-#include "addr-map.h"
-
-#define APMU_FNCLK_EN	(1 << 4)
-#define APMU_AXICLK_EN	(1 << 3)
-#define APMU_FNRST_DIS	(1 << 1)
-#define APMU_AXIRST_DIS	(1 << 0)
-
-/* Wake Clear Register */
-#define APMU_WAKE_CLR	APMU_REG(0x07c)
-
-#define APMU_PXA168_KP_WAKE_CLR		(1 << 7)
-#define APMU_PXA168_CFI_WAKE_CLR	(1 << 6)
-#define APMU_PXA168_XD_WAKE_CLR		(1 << 5)
-#define APMU_PXA168_MSP_WAKE_CLR	(1 << 4)
-#define APMU_PXA168_SD4_WAKE_CLR	(1 << 3)
-#define APMU_PXA168_SD3_WAKE_CLR	(1 << 2)
-#define APMU_PXA168_SD2_WAKE_CLR	(1 << 1)
-#define APMU_PXA168_SD1_WAKE_CLR	(1 << 0)
-
-#endif /* __ASM_MACH_REGS_APMU_H */
diff --git a/arch/arm/mach-mmp/regs-icu.h b/arch/arm/mach-mmp/regs-icu.h
deleted file mode 100644
index 410743d2b402..000000000000
--- a/arch/arm/mach-mmp/regs-icu.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *   Interrupt Control Unit
- */
-
-#ifndef __ASM_MACH_ICU_H
-#define __ASM_MACH_ICU_H
-
-#include "addr-map.h"
-
-#define ICU_VIRT_BASE	(AXI_VIRT_BASE + 0x82000)
-#define ICU_REG(x)	(ICU_VIRT_BASE + (x))
-
-#define ICU2_VIRT_BASE	(AXI_VIRT_BASE + 0x84000)
-#define ICU2_REG(x)	(ICU2_VIRT_BASE + (x))
-
-#define ICU_INT_CONF(n)		ICU_REG((n) << 2)
-#define ICU_INT_CONF_MASK	(0xf)
-
-/************ PXA168/PXA910 (MMP) *********************/
-#define ICU_INT_CONF_AP_INT	(1 << 6)
-#define ICU_INT_CONF_CP_INT	(1 << 5)
-#define ICU_INT_CONF_IRQ	(1 << 4)
-
-#define ICU_AP_FIQ_SEL_INT_NUM	ICU_REG(0x108)	/* AP FIQ Selected Interrupt */
-#define ICU_AP_IRQ_SEL_INT_NUM	ICU_REG(0x10C)	/* AP IRQ Selected Interrupt */
-#define ICU_AP_GBL_IRQ_MSK	ICU_REG(0x114)	/* AP Global Interrupt Mask */
-#define ICU_INT_STATUS_0	ICU_REG(0x128)	/* Interrupt Stuats 0 */
-#define ICU_INT_STATUS_1	ICU_REG(0x12C)	/* Interrupt Status 1 */
-
-/************************** MMP2 ***********************/
-
-/*
- * IRQ0/FIQ0 is routed to SP IRQ/FIQ.
- * IRQ1 is routed to PJ4 IRQ, and IRQ2 is routes to PJ4 FIQ.
- */
-#define ICU_INT_ROUTE_SP_IRQ		(1 << 4)
-#define ICU_INT_ROUTE_PJ4_IRQ		(1 << 5)
-#define ICU_INT_ROUTE_PJ4_FIQ		(1 << 6)
-
-#define MMP2_ICU_PJ4_IRQ_STATUS0	ICU_REG(0x138)
-#define MMP2_ICU_PJ4_IRQ_STATUS1	ICU_REG(0x13c)
-#define MMP2_ICU_PJ4_FIQ_STATUS0	ICU_REG(0x140)
-#define MMP2_ICU_PJ4_FIQ_STATUS1	ICU_REG(0x144)
-
-#define MMP2_ICU_INT4_STATUS		ICU_REG(0x150)
-#define MMP2_ICU_INT5_STATUS		ICU_REG(0x154)
-#define MMP2_ICU_INT17_STATUS		ICU_REG(0x158)
-#define MMP2_ICU_INT35_STATUS		ICU_REG(0x15c)
-#define MMP2_ICU_INT51_STATUS		ICU_REG(0x160)
-
-#define MMP2_ICU_INT4_MASK		ICU_REG(0x168)
-#define MMP2_ICU_INT5_MASK		ICU_REG(0x16C)
-#define MMP2_ICU_INT17_MASK		ICU_REG(0x170)
-#define MMP2_ICU_INT35_MASK		ICU_REG(0x174)
-#define MMP2_ICU_INT51_MASK		ICU_REG(0x178)
-
-#define MMP2_ICU_SP_IRQ_SEL		ICU_REG(0x100)
-#define MMP2_ICU_PJ4_IRQ_SEL		ICU_REG(0x104)
-#define MMP2_ICU_PJ4_FIQ_SEL		ICU_REG(0x108)
-
-#define MMP2_ICU_INVERT			ICU_REG(0x164)
-
-#define MMP2_ICU_INV_PMIC		(1 << 0)
-#define MMP2_ICU_INV_PERF		(1 << 1)
-#define MMP2_ICU_INV_COMMTX		(1 << 2)
-#define MMP2_ICU_INV_COMMRX		(1 << 3)
-
-#endif /* __ASM_MACH_ICU_H */
diff --git a/arch/arm/mach-mmp/regs-timers.h b/arch/arm/mach-mmp/regs-timers.h
index a69f4d7e3443..0cc4aca40e2c 100644
--- a/arch/arm/mach-mmp/regs-timers.h
+++ b/arch/arm/mach-mmp/regs-timers.h
@@ -6,11 +6,6 @@
 #ifndef __ASM_MACH_REGS_TIMERS_H
 #define __ASM_MACH_REGS_TIMERS_H
 
-#include "addr-map.h"
-
-#define TIMERS1_VIRT_BASE	(APB_VIRT_BASE + 0x14000)
-#define TIMERS2_VIRT_BASE	(APB_VIRT_BASE + 0x16000)
-
 #define TMR_CCR		(0x0000)
 #define TMR_TN_MM(n, m)	(0x0004 + ((n) << 3) + (((n) + (m)) << 2))
 #define TMR_CR(n)	(0x0028 + ((n) << 2))
diff --git a/arch/arm/mach-mmp/regs-usb.h b/arch/arm/mach-mmp/regs-usb.h
deleted file mode 100644
index ed0d1aa0ad6c..000000000000
--- a/arch/arm/mach-mmp/regs-usb.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
- */
-
-#ifndef __ASM_ARCH_REGS_USB_H
-#define __ASM_ARCH_REGS_USB_H
-
-#define PXA168_U2O_REGBASE	(0xd4208000)
-#define PXA168_U2O_PHYBASE	(0xd4207000)
-
-#define PXA168_U2H_REGBASE      (0xd4209000)
-#define PXA168_U2H_PHYBASE      (0xd4206000)
-
-#define MMP3_HSIC1_REGBASE	(0xf0001000)
-#define MMP3_HSIC1_PHYBASE	(0xf0001800)
-
-#define MMP3_HSIC2_REGBASE	(0xf0002000)
-#define MMP3_HSIC2_PHYBASE	(0xf0002800)
-
-#define MMP3_FSIC_REGBASE	(0xf0003000)
-#define MMP3_FSIC_PHYBASE	(0xf0003800)
-
-
-#define USB_REG_RANGE		(0x1ff)
-#define USB_PHY_RANGE		(0xff)
-
-/* registers */
-#define U2x_CAPREGS_OFFSET       0x100
-
-/* phy regs */
-#define UTMI_REVISION		0x0
-#define UTMI_CTRL		0x4
-#define UTMI_PLL		0x8
-#define UTMI_TX			0xc
-#define UTMI_RX			0x10
-#define UTMI_IVREF		0x14
-#define UTMI_T0			0x18
-#define UTMI_T1			0x1c
-#define UTMI_T2			0x20
-#define UTMI_T3			0x24
-#define UTMI_T4			0x28
-#define UTMI_T5			0x2c
-#define UTMI_RESERVE		0x30
-#define UTMI_USB_INT		0x34
-#define UTMI_DBG_CTL		0x38
-#define UTMI_OTG_ADDON		0x3c
-
-/* For UTMICTRL Register */
-#define UTMI_CTRL_USB_CLK_EN                    (1 << 31)
-/* pxa168 */
-#define UTMI_CTRL_SUSPEND_SET1                  (1 << 30)
-#define UTMI_CTRL_SUSPEND_SET2                  (1 << 29)
-#define UTMI_CTRL_RXBUF_PDWN                    (1 << 24)
-#define UTMI_CTRL_TXBUF_PDWN                    (1 << 11)
-
-#define UTMI_CTRL_INPKT_DELAY_SHIFT             30
-#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT		28
-#define UTMI_CTRL_PU_REF_SHIFT			20
-#define UTMI_CTRL_ARC_PULLDN_SHIFT              12
-#define UTMI_CTRL_PLL_PWR_UP_SHIFT              1
-#define UTMI_CTRL_PWR_UP_SHIFT                  0
-
-/* For UTMI_PLL Register */
-#define UTMI_PLL_PLLCALI12_SHIFT		29
-#define UTMI_PLL_PLLCALI12_MASK			(0x3 << 29)
-
-#define UTMI_PLL_PLLVDD18_SHIFT			27
-#define UTMI_PLL_PLLVDD18_MASK			(0x3 << 27)
-
-#define UTMI_PLL_PLLVDD12_SHIFT			25
-#define UTMI_PLL_PLLVDD12_MASK			(0x3 << 25)
-
-#define UTMI_PLL_CLK_BLK_EN_SHIFT               24
-#define CLK_BLK_EN                              (0x1 << 24)
-#define PLL_READY                               (0x1 << 23)
-#define KVCO_EXT                                (0x1 << 22)
-#define VCOCAL_START                            (0x1 << 21)
-
-#define UTMI_PLL_KVCO_SHIFT			15
-#define UTMI_PLL_KVCO_MASK                      (0x7 << 15)
-
-#define UTMI_PLL_ICP_SHIFT			12
-#define UTMI_PLL_ICP_MASK                       (0x7 << 12)
-
-#define UTMI_PLL_FBDIV_SHIFT                    4
-#define UTMI_PLL_FBDIV_MASK                     (0xFF << 4)
-
-#define UTMI_PLL_REFDIV_SHIFT                   0
-#define UTMI_PLL_REFDIV_MASK                    (0xF << 0)
-
-/* For UTMI_TX Register */
-#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT		27
-#define UTMI_TX_REG_EXT_FS_RCAL_MASK		(0xf << 27)
-
-#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT	26
-#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK		(0x1 << 26)
-
-#define UTMI_TX_TXVDD12_SHIFT                   22
-#define UTMI_TX_TXVDD12_MASK                    (0x3 << 22)
-
-#define UTMI_TX_CK60_PHSEL_SHIFT                17
-#define UTMI_TX_CK60_PHSEL_MASK                 (0xf << 17)
-
-#define UTMI_TX_IMPCAL_VTH_SHIFT                14
-#define UTMI_TX_IMPCAL_VTH_MASK                 (0x7 << 14)
-
-#define REG_RCAL_START                          (0x1 << 12)
-
-#define UTMI_TX_LOW_VDD_EN_SHIFT                11
-
-#define UTMI_TX_AMP_SHIFT			0
-#define UTMI_TX_AMP_MASK			(0x7 << 0)
-
-/* For UTMI_RX Register */
-#define UTMI_REG_SQ_LENGTH_SHIFT                15
-#define UTMI_REG_SQ_LENGTH_MASK                 (0x3 << 15)
-
-#define UTMI_RX_SQ_THRESH_SHIFT                 4
-#define UTMI_RX_SQ_THRESH_MASK                  (0xf << 4)
-
-#define UTMI_OTG_ADDON_OTG_ON			(1 << 0)
-
-/* fsic registers */
-#define FSIC_MISC			0x4
-#define FSIC_INT			0x28
-#define FSIC_CTRL			0x30
-
-/* HSIC registers */
-#define HSIC_PAD_CTRL			0x4
-
-#define HSIC_CTRL			0x8
-#define HSIC_CTRL_HSIC_ENABLE		(1<<7)
-#define HSIC_CTRL_PLL_BYPASS		(1<<4)
-
-#define TEST_GRP_0			0xc
-#define TEST_GRP_1			0x10
-
-#define HSIC_INT			0x14
-#define HSIC_INT_READY_INT_EN		(1<<10)
-#define HSIC_INT_CONNECT_INT_EN		(1<<9)
-#define HSIC_INT_CORE_INT_EN		(1<<8)
-#define HSIC_INT_HS_READY		(1<<2)
-#define HSIC_INT_CONNECT		(1<<1)
-#define HSIC_INT_CORE			(1<<0)
-
-#define HSIC_CONFIG			0x18
-#define USBHSIC_CTRL			0x20
-
-#define HSIC_USB_CTRL			0x28
-#define HSIC_USB_CTRL_CLKEN		1
-#define	HSIC_USB_CLK_PHY		0x0
-#define HSIC_USB_CLK_PMU		0x1
-
-#endif /* __ASM_ARCH_PXA_U2O_H */
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
deleted file mode 100644
index 6794e2db1ad5..000000000000
--- a/arch/arm/mach-mmp/sram.c
+++ /dev/null
@@ -1,165 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/sram.c
- *
- *  based on mach-davinci/sram.c - DaVinci simple SRAM allocator
- *
- *  Copyright (c) 2011 Marvell Semiconductors Inc.
- *  All Rights Reserved
- *
- *  Add for mmp sram support - Leo Yan <leoy@marvell.com>
- */
-
-#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/genalloc.h>
-
-#include <linux/platform_data/dma-mmp_tdma.h>
-
-struct sram_bank_info {
-	char *pool_name;
-	struct gen_pool *gpool;
-	int granularity;
-
-	phys_addr_t sram_phys;
-	void __iomem *sram_virt;
-	u32 sram_size;
-
-	struct list_head node;
-};
-
-static DEFINE_MUTEX(sram_lock);
-static LIST_HEAD(sram_bank_list);
-
-struct gen_pool *sram_get_gpool(char *pool_name)
-{
-	struct sram_bank_info *info = NULL;
-
-	if (!pool_name)
-		return NULL;
-
-	mutex_lock(&sram_lock);
-
-	list_for_each_entry(info, &sram_bank_list, node)
-		if (!strcmp(pool_name, info->pool_name))
-			break;
-
-	mutex_unlock(&sram_lock);
-
-	if (&info->node == &sram_bank_list)
-		return NULL;
-
-	return info->gpool;
-}
-EXPORT_SYMBOL(sram_get_gpool);
-
-static int sram_probe(struct platform_device *pdev)
-{
-	struct sram_platdata *pdata = pdev->dev.platform_data;
-	struct sram_bank_info *info;
-	struct resource *res;
-	int ret = 0;
-
-	if (!pdata || !pdata->pool_name)
-		return -ENODEV;
-
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no memory resource defined\n");
-		ret = -ENODEV;
-		goto out;
-	}
-
-	if (!resource_size(res))
-		return 0;
-
-	info->sram_phys   = (phys_addr_t)res->start;
-	info->sram_size   = resource_size(res);
-	info->sram_virt   = ioremap(info->sram_phys, info->sram_size);
-	info->pool_name	  = kstrdup(pdata->pool_name, GFP_KERNEL);
-	info->granularity = pdata->granularity;
-
-	info->gpool = gen_pool_create(ilog2(info->granularity), -1);
-	if (!info->gpool) {
-		dev_err(&pdev->dev, "create pool failed\n");
-		ret = -ENOMEM;
-		goto create_pool_err;
-	}
-
-	ret = gen_pool_add_virt(info->gpool, (unsigned long)info->sram_virt,
-				info->sram_phys, info->sram_size, -1);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "add new chunk failed\n");
-		ret = -ENOMEM;
-		goto add_chunk_err;
-	}
-
-	mutex_lock(&sram_lock);
-	list_add(&info->node, &sram_bank_list);
-	mutex_unlock(&sram_lock);
-
-	platform_set_drvdata(pdev, info);
-
-	dev_info(&pdev->dev, "initialized\n");
-	return 0;
-
-add_chunk_err:
-	gen_pool_destroy(info->gpool);
-create_pool_err:
-	iounmap(info->sram_virt);
-	kfree(info->pool_name);
-out:
-	kfree(info);
-	return ret;
-}
-
-static int sram_remove(struct platform_device *pdev)
-{
-	struct sram_bank_info *info;
-
-	info = platform_get_drvdata(pdev);
-	if (info == NULL)
-		return -ENODEV;
-
-	mutex_lock(&sram_lock);
-	list_del(&info->node);
-	mutex_unlock(&sram_lock);
-
-	gen_pool_destroy(info->gpool);
-	iounmap(info->sram_virt);
-	kfree(info->pool_name);
-	kfree(info);
-	return 0;
-}
-
-static const struct platform_device_id sram_id_table[] = {
-	{ "asram", MMP_ASRAM },
-	{ "isram", MMP_ISRAM },
-	{ }
-};
-
-static struct platform_driver sram_driver = {
-	.probe		= sram_probe,
-	.remove		= sram_remove,
-	.driver		= {
-		.name	= "mmp-sram",
-	},
-	.id_table	= sram_id_table,
-};
-
-static int __init sram_init(void)
-{
-	return platform_driver_register(&sram_driver);
-}
-core_initcall(sram_init);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
deleted file mode 100644
index 3261d2322198..000000000000
--- a/arch/arm/mach-mmp/tavorevb.c
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/tavorevb.c
- *
- *  Support for the Marvell PXA910-based TavorEVB Development Platform.
- */
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-pxa910.h"
-#include "pxa910.h"
-#include "irqs.h"
-
-#include "common.h"
-
-static unsigned long tavorevb_pin_config[] __initdata = {
-	/* UART2 */
-	GPIO47_UART2_RXD,
-	GPIO48_UART2_TXD,
-
-	/* SMC */
-	SM_nCS0_nCS0,
-	SM_ADV_SM_ADV,
-	SM_SCLK_SM_SCLK,
-	SM_SCLK_SM_SCLK,
-	SM_BE0_SM_BE0,
-	SM_BE1_SM_BE1,
-
-	/* DFI */
-	DF_IO0_ND_IO0,
-	DF_IO1_ND_IO1,
-	DF_IO2_ND_IO2,
-	DF_IO3_ND_IO3,
-	DF_IO4_ND_IO4,
-	DF_IO5_ND_IO5,
-	DF_IO6_ND_IO6,
-	DF_IO7_ND_IO7,
-	DF_IO8_ND_IO8,
-	DF_IO9_ND_IO9,
-	DF_IO10_ND_IO10,
-	DF_IO11_ND_IO11,
-	DF_IO12_ND_IO12,
-	DF_IO13_ND_IO13,
-	DF_IO14_ND_IO14,
-	DF_IO15_ND_IO15,
-	DF_nCS0_SM_nCS2_nCS0,
-	DF_ALE_SM_WEn_ND_ALE,
-	DF_CLE_SM_OEn_ND_CLE,
-	DF_WEn_DF_WEn,
-	DF_REn_DF_REn,
-	DF_RDY0_DF_RDY0,
-};
-
-static struct pxa_gpio_platform_data pxa910_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct smc91x_platdata tavorevb_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= SMC_CS1_PHYS_BASE + 0x300,
-		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MMP_GPIO_TO_IRQ(80),
-		.end	= MMP_GPIO_TO_IRQ(80),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &tavorevb_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static void __init tavorevb_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(tavorevb_pin_config));
-
-	/* on-chip devices */
-	pxa910_add_uart(1);
-	platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa910_device_gpio);
-
-	/* off-chip devices */
-	platform_device_register(&smc91x_device);
-}
-
-MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa910_init_irq,
-	.init_time	= pxa910_timer_init,
-	.init_machine   = tavorevb_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
deleted file mode 100644
index 7111535f325f..000000000000
--- a/arch/arm/mach-mmp/teton_bga.c
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/teton_bga.c
- *
- *  Support for the Marvell PXA168 Teton BGA Development Platform.
- *
- *  Author: Mark F. Brown <mark.brown314@gmail.com>
- *
- *  This code is based on aspenite.c
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/input.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-pxa168.h"
-#include "pxa168.h"
-#include "teton_bga.h"
-#include "irqs.h"
-
-#include "common.h"
-
-static unsigned long teton_bga_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO107_UART1_TXD,
-	GPIO108_UART1_RXD,
-
-	/* Keypad */
-	GPIO109_KP_MKIN1,
-	GPIO110_KP_MKIN0,
-	GPIO111_KP_MKOUT7,
-	GPIO112_KP_MKOUT6,
-
-	/* I2C Bus */
-	GPIO105_CI2C_SDA,
-	GPIO106_CI2C_SCL,
-
-	/* RTC */
-	GPIO78_GPIO,
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static unsigned int teton_bga_matrix_key_map[] = {
-	KEY(0, 6, KEY_ESC),
-	KEY(0, 7, KEY_ENTER),
-	KEY(1, 6, KEY_LEFT),
-	KEY(1, 7, KEY_RIGHT),
-};
-
-static struct matrix_keymap_data teton_bga_matrix_keymap_data = {
-	.keymap			= teton_bga_matrix_key_map,
-	.keymap_size		= ARRAY_SIZE(teton_bga_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = {
-	.matrix_key_rows        = 2,
-	.matrix_key_cols        = 8,
-	.matrix_keymap_data	= &teton_bga_matrix_keymap_data,
-	.debounce_interval      = 30,
-};
-
-static struct i2c_board_info teton_bga_i2c_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-		.irq = MMP_GPIO_TO_IRQ(RTC_INT_GPIO)
-	},
-};
-
-static void __init teton_bga_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(teton_bga_pin_config));
-
-	/* on-chip devices */
-	pxa168_add_uart(1);
-	pxa168_add_keypad(&teton_bga_keypad_info);
-	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info));
-	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa168_device_gpio);
-}
-
-MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = teton_bga_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/teton_bga.h b/arch/arm/mach-mmp/teton_bga.h
deleted file mode 100644
index 73050096f0bd..000000000000
--- a/arch/arm/mach-mmp/teton_bga.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Support for the Marvell PXA168 Teton BGA Development Platform.
- */
-#ifndef __ASM_MACH_TETON_BGA_H
-#define __ASM_MACH_TETON_BGA_H
-
-/* GPIOs */
-#define MMC_PWENA_GPIO		27
-#define USBHPENB_GPIO		55
-#define RTC_INT_GPIO		78
-#define LCD_VBLK_EN_GPIO	79
-#define LCD_DVDD_EN_GPIO	80
-#define RST_WIFI_GPIO		81
-#define CF_PWEN_GPIO		82
-#define USB_OC_GPIO		83
-#define PWM_GPIO		84
-#define USBHPENA_GPIO		85
-#define TS_INT_GPIO		86
-#define CIR_GPIO		108
-
-#endif /* __ASM_MACH_TETON_BGA_H */
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 41b2e8abc9e6..fcb190826dd1 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -29,32 +29,30 @@
 #include <linux/sched_clock.h>
 #include <asm/mach/time.h>
 
-#include "addr-map.h"
 #include "regs-timers.h"
-#include "regs-apbc.h"
-#include "irqs.h"
 #include <linux/soc/mmp/cputype.h>
 
-#define TIMERS_VIRT_BASE	TIMERS1_VIRT_BASE
-
 #define MAX_DELTA		(0xfffffffe)
 #define MIN_DELTA		(16)
 
-static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE;
+static void __iomem *mmp_timer_base;
 
 /*
- * FIXME: the timer needs some delay to stablize the counter capture
+ * Read the timer through the CVWR register. Delay is required after requesting
+ * a read. The CR register cannot be directly read due to metastability issues
+ * documented in the PXA168 software manual.
  */
 static inline uint32_t timer_read(void)
 {
-	int delay = 100;
+	uint32_t val;
+	int delay = 3;
 
 	__raw_writel(1, mmp_timer_base + TMR_CVWR(1));
 
 	while (delay--)
-		cpu_relax();
+		val = __raw_readl(mmp_timer_base + TMR_CVWR(1));
 
-	return __raw_readl(mmp_timer_base + TMR_CVWR(1));
+	return val;
 }
 
 static u64 notrace mmp_read_sched_clock(void)
@@ -174,7 +172,7 @@ static void __init timer_config(void)
 	__raw_writel(0x2, mmp_timer_base + TMR_CER);
 }
 
-void __init mmp_timer_init(int irq, unsigned long rate)
+static void __init mmp_timer_init(int irq, unsigned long rate)
 {
 	timer_config();
 
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
deleted file mode 100644
index 4f240760d4aa..000000000000
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ /dev/null
@@ -1,315 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/ttc_dkb.c
- *
- *  Support for the Marvell PXA910-based TTC_DKB Development Platform.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-#include <linux/interrupt.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/mfd/88pm860x.h>
-#include <linux/platform_data/mv_usb.h>
-#include <linux/spi/spi.h>
-#include <linux/delay.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include "addr-map.h"
-#include "mfp-pxa910.h"
-#include "pxa910.h"
-#include "irqs.h"
-#include "regs-usb.h"
-
-#include "common.h"
-
-#define TTCDKB_GPIO_EXT0(x)	(MMP_NR_BUILTIN_GPIO + ((x < 0) ? 0 :	\
-				((x < 16) ? x : 15)))
-#define TTCDKB_GPIO_EXT1(x)	(MMP_NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
-				((x < 16) ? x : 15)))
-
-/*
- * 16 board interrupts -- MAX7312 GPIO expander
- * 16 board interrupts -- PCA9575 GPIO expander
- * 24 board interrupts -- 88PM860x PMIC
- */
-#define TTCDKB_NR_IRQS		(MMP_NR_IRQS + 16 + 16 + 24)
-
-static unsigned long ttc_dkb_pin_config[] __initdata = {
-	/* UART2 */
-	GPIO47_UART2_RXD,
-	GPIO48_UART2_TXD,
-
-	/* DFI */
-	DF_IO0_ND_IO0,
-	DF_IO1_ND_IO1,
-	DF_IO2_ND_IO2,
-	DF_IO3_ND_IO3,
-	DF_IO4_ND_IO4,
-	DF_IO5_ND_IO5,
-	DF_IO6_ND_IO6,
-	DF_IO7_ND_IO7,
-	DF_IO8_ND_IO8,
-	DF_IO9_ND_IO9,
-	DF_IO10_ND_IO10,
-	DF_IO11_ND_IO11,
-	DF_IO12_ND_IO12,
-	DF_IO13_ND_IO13,
-	DF_IO14_ND_IO14,
-	DF_IO15_ND_IO15,
-	DF_nCS0_SM_nCS2_nCS0,
-	DF_ALE_SM_WEn_ND_ALE,
-	DF_CLE_SM_OEn_ND_CLE,
-	DF_WEn_DF_WEn,
-	DF_REn_DF_REn,
-	DF_RDY0_DF_RDY0,
-};
-
-static struct pxa_gpio_platform_data pxa910_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct mtd_partition ttc_dkb_onenand_partitions[] = {
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_1M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_8M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= (SZ_2M + SZ_1M),
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_32M + SZ_16M,
-		.mask_flags	= 0,
-	}
-};
-
-static struct onenand_platform_data ttc_dkb_onenand_info = {
-	.parts		= ttc_dkb_onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(ttc_dkb_onenand_partitions),
-};
-
-static struct resource ttc_dkb_resource_onenand[] = {
-	[0] = {
-		.start	= SMC_CS0_PHYS_BASE,
-		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ttc_dkb_device_onenand = {
-	.name		= "onenand-flash",
-	.id		= -1,
-	.resource	= ttc_dkb_resource_onenand,
-	.num_resources	= ARRAY_SIZE(ttc_dkb_resource_onenand),
-	.dev		= {
-		.platform_data	= &ttc_dkb_onenand_info,
-	},
-};
-
-static struct platform_device *ttc_dkb_devices[] = {
-	&pxa910_device_gpio,
-	&pxa910_device_rtc,
-	&ttc_dkb_device_onenand,
-};
-
-static struct pca953x_platform_data max7312_data[] = {
-	{
-		.gpio_base	= TTCDKB_GPIO_EXT0(0),
-		.irq_base	= MMP_NR_IRQS,
-	},
-};
-
-static struct pm860x_platform_data ttc_dkb_pm8607_info = {
-	.irq_base       = IRQ_BOARD_START,
-};
-
-static struct i2c_board_info ttc_dkb_i2c_info[] = {
-	{
-		.type           = "88PM860x",
-		.addr           = 0x34,
-		.platform_data  = &ttc_dkb_pm8607_info,
-		.irq            = IRQ_PXA910_PMIC_INT,
-	},
-	{
-		.type		= "max7312",
-		.addr		= 0x23,
-		.irq		= MMP_GPIO_TO_IRQ(80),
-		.platform_data	= &max7312_data,
-	},
-};
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
-
-static struct mv_usb_platform_data ttc_usb_pdata = {
-	.vbus		= NULL,
-	.mode		= MV_USB_MODE_OTG,
-	.otg_force_a_bus_req = 1,
-	.phy_init	= pxa_usb_phy_init,
-	.phy_deinit	= pxa_usb_phy_deinit,
-	.set_vbus	= NULL,
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-static struct pxa3xx_nand_platform_data dkb_nand_info = {};
-#endif
-
-#if IS_ENABLED(CONFIG_MMP_DISP)
-/* path config */
-#define CFG_IOPADMODE(iopad)   (iopad)  /* 0x0 ~ 0xd */
-#define SCLK_SOURCE_SELECT(x)  (x << 30) /* 0x0 ~ 0x3 */
-/* link config */
-#define CFG_DUMBMODE(mode)     (mode << 28) /* 0x0 ~ 0x6*/
-static struct mmp_mach_path_config dkb_disp_config[] = {
-	[0] = {
-		.name = "mmp-parallel",
-		.overlay_num = 2,
-		.output_type = PATH_OUT_PARALLEL,
-		.path_config = CFG_IOPADMODE(0x1)
-			| SCLK_SOURCE_SELECT(0x1),
-		.link_config = CFG_DUMBMODE(0x2),
-	},
-};
-
-static struct mmp_mach_plat_info dkb_disp_info = {
-	.name = "mmp-disp",
-	.clk_name = "disp0",
-	.path_num = 1,
-	.paths = dkb_disp_config,
-};
-
-static struct mmp_buffer_driver_mach_info dkb_fb_info = {
-	.name = "mmp-fb",
-	.path_name = "mmp-parallel",
-	.overlay_id = 0,
-	.dmafetch_id = 1,
-	.default_pixfmt = PIXFMT_RGB565,
-};
-
-static void dkb_tpo_panel_power(int on)
-{
-	int err;
-	u32 spi_reset = mfp_to_gpio(MFP_PIN_GPIO106);
-
-	if (on) {
-		err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
-		if (err) {
-			pr_err("failed to request GPIO for TPO LCD RESET\n");
-			return;
-		}
-		gpio_direction_output(spi_reset, 0);
-		udelay(100);
-		gpio_set_value(spi_reset, 1);
-		gpio_free(spi_reset);
-	} else {
-		err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
-		if (err) {
-			pr_err("failed to request LCD RESET gpio\n");
-			return;
-		}
-		gpio_set_value(spi_reset, 0);
-		gpio_free(spi_reset);
-	}
-}
-
-static struct mmp_mach_panel_info dkb_tpo_panel_info = {
-	.name = "tpo-hvga",
-	.plat_path_name = "mmp-parallel",
-	.plat_set_onoff = dkb_tpo_panel_power,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias       = "tpo-hvga",
-		.platform_data  = &dkb_tpo_panel_info,
-		.bus_num        = 5,
-	}
-};
-
-static void __init add_disp(void)
-{
-	pxa_register_device(&pxa910_device_disp,
-		&dkb_disp_info, sizeof(dkb_disp_info));
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-	pxa_register_device(&pxa910_device_fb,
-		&dkb_fb_info, sizeof(dkb_fb_info));
-	pxa_register_device(&pxa910_device_panel,
-		&dkb_tpo_panel_info, sizeof(dkb_tpo_panel_info));
-}
-#endif
-
-static void __init ttc_dkb_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
-
-	/* on-chip devices */
-	pxa910_add_uart(1);
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-	pxa910_add_nand(&dkb_nand_info);
-#endif
-
-	/* off-chip devices */
-	pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
-	platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-#if IS_ENABLED(CONFIG_PHY_PXA_USB)
-	platform_device_register(&pxa168_device_usb_phy);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MV_UDC)
-	pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
-	platform_device_register(&pxa168_device_u2o);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
-	pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata;
-	platform_device_register(&pxa168_device_u2oehci);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MV_OTG)
-	pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
-	platform_device_register(&pxa168_device_u2ootg);
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_MMP_DISP)
-	add_disp();
-#endif
-}
-
-MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= TTCDKB_NR_IRQS,
-	.init_irq       = pxa910_init_irq,
-	.init_time	= pxa910_timer_init,
-	.init_machine   = ttc_dkb_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
index 31ada63ba51b..909c6573ba8b 100644
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@@ -2,6 +2,7 @@
 menuconfig ARCH_MOXART
 	bool "MOXA ART SoC"
 	depends on ARCH_MULTI_V4
+	depends on CPU_LITTLE_ENDIAN
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
 	select FARADAY_FTINTC010
diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig
index 576d1ab293c8..fa9709f30b46 100644
--- a/arch/arm/mach-mstar/Kconfig
+++ b/arch/arm/mach-mstar/Kconfig
@@ -1,9 +1,12 @@
 menuconfig ARCH_MSTARV7
 	bool "MStar/Sigmastar Armv7 SoC Support"
 	depends on ARCH_MULTI_V7
+	select ARM_ERRATA_814220
 	select ARM_GIC
 	select ARM_HEAVY_MB
+	select HAVE_ARM_ARCH_TIMER
 	select MST_IRQ
+	select MSTAR_MSC313_MPLL
 	help
 	  Support for newer MStar/Sigmastar SoC families that are
 	  based on Armv7 cores like the Cortex A7 and share the same
@@ -17,11 +20,4 @@ config MACH_INFINITY
 	help
 	  Support for MStar/Sigmastar infinity IP camera SoCs.
 
-config MACH_MERCURY
-	bool "MStar/Sigmastar mercury SoC support"
-	default ARCH_MSTARV7
-	help
-	  Support for MStar/Sigmastar mercury dash camera SoCs.
-	  Note that older Mercury2 SoCs are ARM9 based and not supported.
-
 endif
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index ea52c7fabb79..9de3bbc09c3a 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -2,6 +2,8 @@
 menuconfig ARCH_MV78XX0
 	bool "Marvell MV78xx0"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	depends on ATAGS
 	select CPU_FEROCEON
 	select GPIOLIB
 	select MVEBU_MBUS
@@ -13,18 +15,6 @@ menuconfig ARCH_MV78XX0
 
 if ARCH_MV78XX0
 
-config MACH_DB78X00_BP
-	bool "Marvell DB-78x00-BP Development Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell DB-78x00-BP Development Board.
-
-config MACH_RD78X00_MASA
-	bool "Marvell RD-78x00-mASA Reference Design"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell RD-78x00-mASA Reference Design.
-
 config MACH_TERASTATION_WXL
 	bool "Buffalo WLX (Terastation Duo) NAS"
 	help
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
index a839e960b8c6..ddee6ae501bb 100644
--- a/arch/arm/mach-mv78xx0/Makefile
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -1,7 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
 
 obj-y				+= common.o mpp.o irq.o pcie.o
-obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
-obj-$(CONFIG_MACH_RD78X00_MASA)	+= rd78x00-masa-setup.o
 obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o
diff --git a/arch/arm/mach-mv78xx0/bridge-regs.h b/arch/arm/mach-mv78xx0/bridge-regs.h
index 2f54e1753d45..d57ac967c4b3 100644
--- a/arch/arm/mach-mv78xx0/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/bridge-regs.h
@@ -1,8 +1,4 @@
-/*
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
 
 #ifndef __ASM_ARCH_BRIDGE_REGS_H
 #define __ASM_ARCH_BRIDGE_REGS_H
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index e112f2e7cc9a..62e982f74bc2 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
  *
  * Buffalo WXL (Terastation Duo) Setup routines
  *
  * sebastien requiem <sebastien@requiem.fr>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
@@ -17,6 +14,9 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include "mv78xx0.h"
@@ -24,6 +24,11 @@
 #include "mpp.h"
 
 
+#define TSWXL_AUTO_SWITCH	15
+#define TSWXL_USB_POWER1	30
+#define TSWXL_USB_POWER2	31
+
+
 /* This arch has 2 Giga Ethernet */
 
 static struct mv643xx_eth_platform_data db78x00_ge00_data = {
@@ -42,7 +47,7 @@ static struct mv_sata_platform_data db78x00_sata_data = {
 };
 
 static struct i2c_board_info __initdata db78x00_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
+	I2C_BOARD_INFO("rs5c372a", 0x32),
 };
 
 
@@ -60,9 +65,9 @@ static unsigned int wxl_mpp_config[] __initdata = {
 	MPP10_GE1_RXD2,
 	MPP11_GE1_RXD3,
 	MPP12_GPIO,
-	MPP13_SYSRST_OUTn,
-	MPP14_SATA1_ACTn,
-	MPP15_SATA0_ACTn,
+	MPP13_GPIO,
+	MPP14_GPIO,
+	MPP15_GPIO,
 	MPP16_GPIO,
 	MPP17_GPIO,
 	MPP18_GPIO,
@@ -76,7 +81,7 @@ static unsigned int wxl_mpp_config[] __initdata = {
 	MPP26_UA2_CTSn,
 	MPP27_UA2_RTSn,
 	MPP28_GPIO,
-	MPP29_SYSRST_OUTn,
+	MPP29_GPIO,
 	MPP30_GPIO,
 	MPP31_GPIO,
 	MPP32_GPIO,
@@ -87,19 +92,41 @@ static unsigned int wxl_mpp_config[] __initdata = {
 	MPP37_GPIO,
 	MPP38_GPIO,
 	MPP39_GPIO,
-	MPP40_UNUSED,
-	MPP41_UNUSED,
-	MPP42_UNUSED,
-	MPP43_UNUSED,
-	MPP44_UNUSED,
-	MPP45_UNUSED,
-	MPP46_UNUSED,
-	MPP47_UNUSED,
-	MPP48_SATA1_ACTn,
-	MPP49_SATA0_ACTn,
+	MPP40_GPIO,
+	MPP41_GPIO,
+	MPP42_GPIO,
+	MPP43_GPIO,
+	MPP44_GPIO,
+	MPP45_GPIO,
+	MPP46_GPIO,
+	MPP47_GPIO,
+	MPP48_GPIO,
+	MPP49_GPIO,
 	0
 };
 
+static struct gpio_keys_button tswxl_buttons[] = {
+	{
+		.code	   = KEY_OPTION,
+		.gpio	   = TSWXL_AUTO_SWITCH,
+		.desc	   = "Power-auto Switch",
+		.active_low     = 1,
+	}
+};
+
+static struct gpio_keys_platform_data tswxl_button_data = {
+	.buttons	= tswxl_buttons,
+	.nbuttons       = ARRAY_SIZE(tswxl_buttons),
+};
+
+static struct platform_device tswxl_button_device = {
+	.name	   = "gpio-keys",
+	.id	     = -1,
+	.num_resources  = 0,
+	.dev	    = {
+		.platform_data  = &tswxl_button_data,
+	},
+};
 
 static void __init wxl_init(void)
 {
@@ -114,7 +141,6 @@ static void __init wxl_init(void)
 	 */
 	mv78xx0_ehci0_init();
 	mv78xx0_ehci1_init();
-	mv78xx0_ehci2_init();
 	mv78xx0_ge00_init(&db78x00_ge00_data);
 	mv78xx0_ge01_init(&db78x00_ge01_data);
 	mv78xx0_sata_init(&db78x00_sata_data);
@@ -122,22 +148,23 @@ static void __init wxl_init(void)
 	mv78xx0_uart1_init();
 	mv78xx0_uart2_init();
 	mv78xx0_uart3_init();
+	mv78xx0_xor_init();
+	mv78xx0_crypto_init();
 	mv78xx0_i2c_init();
 	i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
+
+	//enable both usb ports
+	gpio_direction_output(TSWXL_USB_POWER1, 1);
+	gpio_direction_output(TSWXL_USB_POWER2, 1);
+
+	//enable rear switch
+	platform_device_register(&tswxl_button_device);
 }
 
 static int __init wxl_pci_init(void)
 {
-	if (machine_is_terastation_wxl()) {
-		/*
-		 * Assign the x16 PCIe slot on the board to CPU core
-		 * #0, and let CPU core #1 have the four x1 slots.
-		 */
-		if (mv78xx0_core_index() == 0)
-			mv78xx0_pcie_init(0, 1);
-		else
-			mv78xx0_pcie_init(1, 0);
-	}
+	if (machine_is_terastation_wxl() && mv78xx0_core_index() == 0)
+                mv78xx0_pcie_init(1, 1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index dd762d1b083f..679753fcc0ef 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-mv78xx0/common.c
  *
  * Core functions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
@@ -345,6 +342,29 @@ void __ref mv78xx0_timer_init(void)
 			IRQ_MV78XX0_TIMER_1, get_tclk());
 }
 
+/****************************************************************************
+* XOR engine
+****************************************************************************/
+void __init mv78xx0_xor_init(void)
+{
+	orion_xor0_init(XOR_PHYS_BASE,
+		XOR_PHYS_BASE + 0x200,
+		IRQ_MV78XX0_XOR_0, IRQ_MV78XX0_XOR_1);
+}
+
+/****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+****************************************************************************/
+void __init mv78xx0_crypto_init(void)
+{
+	mvebu_mbus_add_window_by_id(MV78XX0_MBUS_SRAM_TARGET,
+				MV78XX0_MBUS_SRAM_ATTR,
+				MV78XX0_SRAM_PHYS_BASE,
+			MV78XX0_SRAM_SIZE);
+	orion_crypto_init(CRYPTO_PHYS_BASE, MV78XX0_SRAM_PHYS_BASE,
+		SZ_8K, IRQ_MV78XX0_CRYPTO);
+}
+
 
 /*****************************************************************************
  * General
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index 6889af26077d..9f1dfd595003 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * arch/arm/mach-mv78xx0/common.h
  *
  * Core functions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __ARCH_MV78XX0_COMMON_H
@@ -46,6 +43,8 @@ void mv78xx0_uart0_init(void);
 void mv78xx0_uart1_init(void);
 void mv78xx0_uart2_init(void);
 void mv78xx0_uart3_init(void);
+void mv78xx0_xor_init(void);
+void mv78xx0_crypto_init(void);
 void mv78xx0_i2c_init(void);
 void mv78xx0_restart(enum reboot_mode, const char *);
 
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
deleted file mode 100644
index cf16e08d4cf5..000000000000
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/db78x00-bp-setup.c
- *
- * Marvell DB-78x00-BP Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/i2c.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "mv78xx0.h"
-#include "common.h"
-
-static struct mv643xx_eth_platform_data db78x00_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data db78x00_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(9),
-};
-
-static struct mv643xx_eth_platform_data db78x00_ge10_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(10),
-};
-
-static struct mv643xx_eth_platform_data db78x00_ge11_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
-};
-
-static struct mv_sata_platform_data db78x00_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct i2c_board_info __initdata db78x00_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
-};
-
-
-static void __init db78x00_init(void)
-{
-	/*
-	 * Basic MV78xx0 setup. Needs to be called early.
-	 */
-	mv78xx0_init();
-
-	/*
-	 * Partition on-chip peripherals between the two CPU cores.
-	 */
-	if (mv78xx0_core_index() == 0) {
-		mv78xx0_ehci0_init();
-		mv78xx0_ehci1_init();
-		mv78xx0_ehci2_init();
-		mv78xx0_ge00_init(&db78x00_ge00_data);
-		mv78xx0_ge01_init(&db78x00_ge01_data);
-		mv78xx0_ge10_init(&db78x00_ge10_data);
-		mv78xx0_ge11_init(&db78x00_ge11_data);
-		mv78xx0_sata_init(&db78x00_sata_data);
-		mv78xx0_uart0_init();
-		mv78xx0_uart2_init();
-		mv78xx0_i2c_init();
-		i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
-	} else {
-		mv78xx0_uart1_init();
-		mv78xx0_uart3_init();
-	}
-}
-
-static int __init db78x00_pci_init(void)
-{
-	if (machine_is_db78x00_bp()) {
-		/*
-		 * Assign the x16 PCIe slot on the board to CPU core
-		 * #0, and let CPU core #1 have the four x1 slots.
-		 */
-		if (mv78xx0_core_index() == 0)
-			mv78xx0_pcie_init(0, 1);
-		else
-			mv78xx0_pcie_init(1, 0);
-	}
-
-	return 0;
-}
-subsys_initcall(db78x00_pci_init);
-
-MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= MV78XX0_NR_IRQS,
-	.init_machine	= db78x00_init,
-	.map_io		= mv78xx0_map_io,
-	.init_early	= mv78xx0_init_early,
-	.init_irq	= mv78xx0_init_irq,
-	.init_time	= mv78xx0_timer_init,
-	.restart	= mv78xx0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 788569e960e1..a34b6855fb19 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-mv78xx0/irq.c
  *
  * MV78xx0 IRQ handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/gpio.h>
 #include <linux/kernel.h>
@@ -67,7 +64,6 @@ void __init mv78xx0_init_irq(void)
 	 * registers for core #1 are at an offset of 0x18 from those of
 	 * core #0.)
 	 */
-	orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE,
-			mv78xx0_core_index() ? 0x18 : 0,
+	orion_gpio_init(0, 32, GPIO_VIRT_BASE, mv78xx0_core_index() ? 0x18 : 0,
 			IRQ_MV78XX0_GPIO_START, gpio0_irqs);
 }
diff --git a/arch/arm/mach-mv78xx0/irqs.h b/arch/arm/mach-mv78xx0/irqs.h
index 67e0fe730a13..12b357d383d8 100644
--- a/arch/arm/mach-mv78xx0/irqs.h
+++ b/arch/arm/mach-mv78xx0/irqs.h
@@ -1,10 +1,5 @@
-/*
- * IRQ definitions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* IRQ definitions for Marvell MV78xx0 SoCs */
 
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
index 72843c02e95a..aff0e612cbba 100644
--- a/arch/arm/mach-mv78xx0/mpp.c
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-mv78x00/mpp.c
  *
  * MPP functions for Marvell MV78x00 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/gpio.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h
index 3752302ae2ee..47db52f45546 100644
--- a/arch/arm/mach-mv78xx0/mpp.h
+++ b/arch/arm/mach-mv78xx0/mpp.h
@@ -1,12 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * linux/arch/arm/mach-mv78xx0/mpp.h -- Multi Purpose Pins
  *
- *
  * sebastien requiem <sebastien@requiem.fr>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __MV78X00_MPP_H
diff --git a/arch/arm/mach-mv78xx0/mv78xx0.h b/arch/arm/mach-mv78xx0/mv78xx0.h
index c1a9a1d1b295..88efb1e44142 100644
--- a/arch/arm/mach-mv78xx0/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/mv78xx0.h
@@ -1,10 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Generic definitions for Marvell MV78xx0 SoC flavors:
  *  MV781x0 and MV782x0.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __ASM_ARCH_MV78XX0_H
@@ -52,9 +49,15 @@
 #define MV78XX0_REGS_VIRT_BASE		IOMEM(0xfec00000)
 #define MV78XX0_REGS_SIZE		SZ_1M
 
+#define MV78XX0_SRAM_PHYS_BASE          (0xf2200000)
+#define MV78XX0_SRAM_SIZE               SZ_8K
+
 #define MV78XX0_PCIE_MEM_PHYS_BASE	0xc0000000
 #define MV78XX0_PCIE_MEM_SIZE		0x30000000
 
+#define MV78XX0_MBUS_SRAM_TARGET       0x09
+#define MV78XX0_MBUS_SRAM_ATTR         0x00
+
 /*
  * Core-specific peripheral registers.
  */
@@ -101,6 +104,8 @@
 #define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x51000)
 #define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x52000)
 
+#define XOR_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x60900)
+
 #define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x70000)
 #define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x74000)
 
@@ -109,6 +114,8 @@
 #define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x88000)
 #define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x8c000)
 
+#define CRYPTO_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE + 0x90000)
+
 #define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0xa0000)
 
 /*
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index 636d84b40466..533cb7856943 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-mv78xx0/pcie.c
  *
  * PCIe functions for Marvell MV78xx0 SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
@@ -45,7 +42,7 @@ void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
 
 u32 pcie_port_size[8] = {
 	0,
-	0x30000000,
+	0x20000000,
 	0x10000000,
 	0x10000000,
 	0x08000000,
@@ -101,6 +98,7 @@ static void __init mv78xx0_pcie_preinit(void)
 static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct pcie_port *pp;
+	struct resource realio;
 
 	if (nr >= num_pcie_ports)
 		return 0;
@@ -115,7 +113,9 @@ static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
 	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
 	orion_pcie_setup(pp->base);
 
-	pci_ioremap_io(nr * SZ_64K, MV78XX0_PCIE_IO_PHYS_BASE(nr));
+	realio.start = nr * SZ_64K;
+	realio.end = realio.start + SZ_64K - 1;
+	pci_remap_iospace(&realio, MV78XX0_PCIE_IO_PHYS_BASE(nr));
 
 	pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
 
@@ -177,18 +177,23 @@ static struct pci_ops pcie_ops = {
 	.write = pcie_wr_conf,
 };
 
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
 static void rc_pci_fixup(struct pci_dev *dev)
 {
-	/*
-	 * Prevent enumeration of root complex.
-	 */
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
-		int i;
-
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
+		struct resource *r;
+
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
+		pci_dev_for_each_resource(dev, r) {
+			r->start = 0;
+			r->end   = 0;
+			r->flags = 0;
 		}
 	}
 }
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
deleted file mode 100644
index 308ab71ec822..000000000000
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/arm/mach-mv78x00/rd78x00-masa-setup.c
- *
- * Marvell RD-78x00-mASA Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "mv78xx0.h"
-#include "common.h"
-
-static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data rd78x00_masa_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(9),
-};
-
-static struct mv643xx_eth_platform_data rd78x00_masa_ge10_data = {
-};
-
-static struct mv643xx_eth_platform_data rd78x00_masa_ge11_data = {
-};
-
-static struct mv_sata_platform_data rd78x00_masa_sata_data = {
-	.n_ports	= 2,
-};
-
-static void __init rd78x00_masa_init(void)
-{
-	/*
-	 * Basic MV78x00 setup. Needs to be called early.
-	 */
-	mv78xx0_init();
-
-	/*
-	 * Partition on-chip peripherals between the two CPU cores.
-	 */
-	if (mv78xx0_core_index() == 0) {
-		mv78xx0_ehci0_init();
-		mv78xx0_ehci1_init();
-		mv78xx0_ge00_init(&rd78x00_masa_ge00_data);
-		mv78xx0_ge10_init(&rd78x00_masa_ge10_data);
-		mv78xx0_sata_init(&rd78x00_masa_sata_data);
-		mv78xx0_uart0_init();
-		mv78xx0_uart2_init();
-	} else {
-		mv78xx0_ehci2_init();
-		mv78xx0_ge01_init(&rd78x00_masa_ge01_data);
-		mv78xx0_ge11_init(&rd78x00_masa_ge11_data);
-		mv78xx0_uart1_init();
-		mv78xx0_uart3_init();
-	}
-}
-
-static int __init rd78x00_pci_init(void)
-{
-	/*
-	 * Assign all PCIe devices to CPU core #0.
-	 */
-	if (machine_is_rd78x00_masa() && mv78xx0_core_index() == 0)
-		mv78xx0_pcie_init(1, 1);
-
-	return 0;
-}
-subsys_initcall(rd78x00_pci_init);
-
-MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= MV78XX0_NR_IRQS,
-	.init_machine	= rd78x00_masa_init,
-	.map_io		= mv78xx0_map_io,
-	.init_early	= mv78xx0_init_early,
-	.init_irq	= mv78xx0_init_irq,
-	.init_time	= mv78xx0_timer_init,
-	.restart	= mv78xx0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 34dbeaab94b0..9f60a6fe0eaf 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,8 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_MVEBU
 	bool "Marvell Engineering Business Unit (MVEBU) SoCs"
-	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
-	select ARCH_SUPPORTS_BIG_ENDIAN
+	depends on ARCH_MULTI_V7 || (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN)
 	select CLKSRC_MMIO
 	select PINCTRL
 	select PLAT_ORION
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index cb106899dd7c..569768a69ffc 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -1,8 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
-
-AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
-CFLAGS_pmsu.o			:= -march=armv7-a
+ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
 
 obj-$(CONFIG_MACH_MVEBU_ANY)	 += system-controller.o mvebu-soc-id.o
 
diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
index 09413b678409..c96ecdafe31f 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.h
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Generic definitions for Marvell Armada_370_XP SoCs
  *
@@ -6,10 +7,6 @@
  * Lior Amsalem <alior@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __MACH_ARMADA_370_XP_H
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index d2df5ef9382b..fd5d0c8ff695 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree support for Armada 370 and XP platforms.
  *
@@ -6,10 +7,6 @@
  * Lior Amsalem <alior@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c
index 49e3c8d20c2f..a6b621ff0b87 100644
--- a/arch/arm/mach-mvebu/coherency.c
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Coherency fabric (Aurora) support for Armada 370, 375, 38x and XP
  * platforms.
@@ -8,10 +9,6 @@
  * Gregory Clement <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * The Armada 370, 375, 38x and XP SOCs have a coherency fabric which is
  * responsible for ensuring hardware coherency between all CPUs and between
  * CPUs and I/O masters. This file initializes the coherency fabric and
@@ -98,7 +95,7 @@ static int mvebu_hwcc_notifier(struct notifier_block *nb,
 
 	if (event != BUS_NOTIFY_ADD_DEVICE)
 		return NOTIFY_DONE;
-	set_dma_ops(dev, &arm_coherent_dma_ops);
+	dev->dma_coherent = true;
 
 	return NOTIFY_OK;
 }
diff --git a/arch/arm/mach-mvebu/coherency.h b/arch/arm/mach-mvebu/coherency.h
index 6067f14263f7..cae866ab4867 100644
--- a/arch/arm/mach-mvebu/coherency.h
+++ b/arch/arm/mach-mvebu/coherency.h
@@ -1,14 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * arch/arm/mach-mvebu/include/mach/coherency.h
  *
- *
  * Coherency fabric (Aurora) support for Armada 370 and XP platforms.
  *
  * Copyright (C) 2012 Marvell
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __MACH_370_XP_COHERENCY_H
diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S
index a3a64bf97250..35930e03d9c6 100644
--- a/arch/arm/mach-mvebu/coherency_ll.S
+++ b/arch/arm/mach-mvebu/coherency_ll.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Coherency fabric: low level functions
  *
@@ -5,10 +6,6 @@
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * This file implements the assembly function to add a CPU to the
  * coherency fabric. This function is called by each of the secondary
  * CPUs during their early boot in an SMP kernel, this why this
@@ -23,6 +20,7 @@
 #include <asm/assembler.h>
 #include <asm/cp15.h>
 
+	.arch armv7-a
 	.text
 /*
  * Returns the coherency base address in r1 (r0 is untouched), or 0 if
diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h
index 6b775492cfad..fbfa3c4f30df 100644
--- a/arch/arm/mach-mvebu/common.h
+++ b/arch/arm/mach-mvebu/common.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Core functions for Marvell System On Chip
  *
@@ -6,10 +7,6 @@
  * Lior Amsalem <alior@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __ARCH_MVEBU_COMMON_H
diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c
index f33a31c6aff8..66b6c0c6ce1d 100644
--- a/arch/arm/mach-mvebu/cpu-reset.c
+++ b/arch/arm/mach-mvebu/cpu-reset.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2014 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #define pr_fmt(fmt) "mvebu-cpureset: " fmt
diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c
index d076c5771adc..c938ba725d3e 100644
--- a/arch/arm/mach-mvebu/dove.c
+++ b/arch/arm/mach-mvebu/dove.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-mvebu/dove.c
  *
  * Marvell Dove 88AP510 System On Chip FDT Board
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/init.h>
diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S
index b093a196e801..df723cf85cae 100644
--- a/arch/arm/mach-mvebu/headsmp-a9.S
+++ b/arch/arm/mach-mvebu/headsmp-a9.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * SMP support: Entry point for secondary CPUs of Marvell EBU
  * Cortex-A9 based SOCs (Armada 375 and Armada 38x).
@@ -6,10 +7,6 @@
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/linkage.h>
diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S
index 2c4032e368ba..f05c59dad32a 100644
--- a/arch/arm/mach-mvebu/headsmp.S
+++ b/arch/arm/mach-mvebu/headsmp.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * SMP support: Entry point for secondary CPUs
  *
@@ -7,10 +8,6 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * This file implements the assembly entry point for secondary CPUs in
  * an SMP kernel. The only thing we need to do is to add the CPU to
  * the coherency fabric by writing to 2 registers. Currently the base
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index ceaad6d5927e..8ff34753e760 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
  *
  * arch/arm/mach-mvebu/kirkwood.c
  *
  * Flattened Device Tree board initialization
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/clk.h>
@@ -84,6 +81,7 @@ static void __init kirkwood_dt_eth_fixup(void)
 		struct device_node *pnp = of_get_parent(np);
 		struct clk *clk;
 		struct property *pmac;
+		u8 tmpmac[ETH_ALEN];
 		void __iomem *io;
 		u8 *macaddr;
 		u32 reg;
@@ -93,7 +91,7 @@ static void __init kirkwood_dt_eth_fixup(void)
 
 		/* skip disabled nodes or nodes with valid MAC address*/
 		if (!of_device_is_available(pnp) ||
-		    !IS_ERR(of_get_mac_address(np)))
+		    !of_get_mac_address(np, tmpmac))
 			goto eth_fixup_skip;
 
 		clk = of_clk_get(pnp, 0);
diff --git a/arch/arm/mach-mvebu/kirkwood.h b/arch/arm/mach-mvebu/kirkwood.h
index 89f3d1f51643..15135994ce2f 100644
--- a/arch/arm/mach-mvebu/kirkwood.h
+++ b/arch/arm/mach-mvebu/kirkwood.h
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * arch/arm/mach-mvebu/kirkwood.h
  *
  * Generic definitions for Marvell Kirkwood SoC flavors:
  * 88F6180, 88F6192 and 88F6281.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #define KIRKWOOD_REGS_PHYS_BASE	0xf1000000
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c
index a99434bcee84..f436c7b8c7ae 100644
--- a/arch/arm/mach-mvebu/mvebu-soc-id.c
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * ID and revision information for mvebu SoCs
  *
@@ -5,10 +6,6 @@
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * All the mvebu SoCs have information related to their variant and
  * revision that can be read from the PCI control register. This is
  * done before the PCI initialization to avoid any conflict. Once the
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.h b/arch/arm/mach-mvebu/mvebu-soc-id.h
index e124a0b82a3e..225649b2288a 100644
--- a/arch/arm/mach-mvebu/mvebu-soc-id.h
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Marvell EBU SoC ID and revision definitions.
  *
  * Copyright (C) 2014 Marvell Semiconductor
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __LINUX_MVEBU_SOC_ID_H
diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c
index d715dec1c197..785ee2af5baa 100644
--- a/arch/arm/mach-mvebu/platsmp-a9.c
+++ b/arch/arm/mach-mvebu/platsmp-a9.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Symmetric Multi Processing (SMP) support for Marvell EBU Cortex-A9
  * based SOCs (Armada 375/38x).
@@ -6,10 +7,6 @@
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/init.h>
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index c130497dc6cc..18384ea6862c 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Symmetric Multi Processing (SMP) support for Armada XP
  *
@@ -8,10 +9,6 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * The Armada XP SoC has 4 ARMv7 PJ4B CPUs running in full HW coherency
  * This file implements the routines for preparing the SMP infrastructure
  * and waking up the secondary CPUs
diff --git a/arch/arm/mach-mvebu/pm-board.c b/arch/arm/mach-mvebu/pm-board.c
index 070552511699..beec22e17e89 100644
--- a/arch/arm/mach-mvebu/pm-board.c
+++ b/arch/arm/mach-mvebu/pm-board.c
@@ -1,29 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Board-level suspend/resume support.
  *
  * Copyright (C) 2014-2015 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_gpio.h>
 #include <linux/slab.h>
 #include "common.h"
 
 #define ARMADA_PIC_NR_GPIOS 3
 
 static void __iomem *gpio_ctrl;
-static int pic_gpios[ARMADA_PIC_NR_GPIOS];
+static struct gpio_desc *pic_gpios[ARMADA_PIC_NR_GPIOS];
 static int pic_raw_gpios[ARMADA_PIC_NR_GPIOS];
 
 static void mvebu_armada_pm_enter(void __iomem *sdram_reg, u32 srcmd)
@@ -93,27 +90,17 @@ static int __init mvebu_armada_pm_init(void)
 		char *name;
 		struct of_phandle_args args;
 
-		pic_gpios[i] = of_get_named_gpio(np, "ctrl-gpios", i);
-		if (pic_gpios[i] < 0) {
-			ret = -ENODEV;
-			goto out;
-		}
-
 		name = kasprintf(GFP_KERNEL, "pic-pin%d", i);
 		if (!name) {
 			ret = -ENOMEM;
 			goto out;
 		}
 
-		ret = gpio_request(pic_gpios[i], name);
-		if (ret < 0) {
-			kfree(name);
-			goto out;
-		}
-
-		ret = gpio_direction_output(pic_gpios[i], 0);
-		if (ret < 0) {
-			gpio_free(pic_gpios[i]);
+		pic_gpios[i] = fwnode_gpiod_get_index(of_fwnode_handle(np),
+						      "ctrl", i, GPIOD_OUT_HIGH,
+						      name);
+		ret = PTR_ERR_OR_ZERO(pic_gpios[i]);
+		if (ret) {
 			kfree(name);
 			goto out;
 		}
@@ -121,7 +108,7 @@ static int __init mvebu_armada_pm_init(void)
 		ret = of_parse_phandle_with_fixed_args(np, "ctrl-gpios", 2,
 						       i, &args);
 		if (ret < 0) {
-			gpio_free(pic_gpios[i]);
+			gpiod_put(pic_gpios[i]);
 			kfree(name);
 			goto out;
 		}
diff --git a/arch/arm/mach-mvebu/pm.c b/arch/arm/mach-mvebu/pm.c
index c487be61d6d8..b149d9b77505 100644
--- a/arch/arm/mach-mvebu/pm.c
+++ b/arch/arm/mach-mvebu/pm.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Suspend/resume support. Currently supporting Armada XP only.
  *
  * Copyright (C) 2014 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/cpu_pm.h>
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index 73d5d72dfc3e..6f366d8c4231 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Power Management Service Unit(PMSU) support for Armada 370/XP platforms.
  *
@@ -7,10 +8,6 @@
  * Gregory Clement <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * The Armada 370 and Armada XP SOCs have a power management service
  * unit which is responsible for powering down and waking up CPUs and
  * other SOC units
@@ -294,6 +291,7 @@ int armada_370_xp_pmsu_idle_enter(unsigned long deepidle)
 
 	/* Test the CR_C bit and set it if it was cleared */
 	asm volatile(
+	".arch	armv7-a\n\t"
 	"mrc	p15, 0, r0, c1, c0, 0 \n\t"
 	"tst	r0, %0 \n\t"
 	"orreq	r0, r0, #(1 << 2) \n\t"
diff --git a/arch/arm/mach-mvebu/pmsu.h b/arch/arm/mach-mvebu/pmsu.h
index ea79269c2702..1e847388e8dd 100644
--- a/arch/arm/mach-mvebu/pmsu.h
+++ b/arch/arm/mach-mvebu/pmsu.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Power Management Service Unit (PMSU) support for Armada 370/XP platforms.
  *
  * Copyright (C) 2012 Marvell
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __MACH_MVEBU_PMSU_H
diff --git a/arch/arm/mach-mvebu/pmsu_ll.S b/arch/arm/mach-mvebu/pmsu_ll.S
index 7aae9a25cfeb..f7d21385fd88 100644
--- a/arch/arm/mach-mvebu/pmsu_ll.S
+++ b/arch/arm/mach-mvebu/pmsu_ll.S
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (C) 2014 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Gregory Clement <gregory.clement@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/linkage.h>
diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
index 04d9ebe6a90a..48224b6ed6dc 100644
--- a/arch/arm/mach-mvebu/system-controller.c
+++ b/arch/arm/mach-mvebu/system-controller.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * System controller support for Armada 370, 375 and XP platforms.
  *
@@ -7,10 +8,6 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
  * The Armada 370, 375 and Armada XP SoCs have a range of
  * miscellaneous registers, that do not belong to a particular device,
  * but rather provide system-level features. This basic
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index be1c1388055a..26dd8b9b7321 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -16,6 +16,7 @@ config SOC_IMX28
 config ARCH_MXS
 	bool "Freescale MXS (i.MX23, i.MX28) support"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select GPIOLIB
 	select MXS_TIMER
 	select PINCTRL
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 25c9d184fa4c..51e47053c816 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -17,7 +17,6 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/sys_soc.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -175,7 +174,7 @@ static void __init update_fec_mac_prop(enum mac_oui oui)
 
 		from = np;
 
-		if (of_get_property(np, "local-mac-address", NULL))
+		if (of_property_present(np, "local-mac-address"))
 			continue;
 
 		newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL);
@@ -393,8 +392,10 @@ static void __init mxs_machine_init(void)
 
 	root = of_find_node_by_path("/");
 	ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
-	if (ret)
+	if (ret) {
+		kfree(soc_dev_attr);
 		return;
+	}
 
 	soc_dev_attr->family = "Freescale MXS Family";
 	soc_dev_attr->soc_id = mxs_get_soc_id();
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index e98429be2b18..f5c4df6d2aad 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -2,10 +2,10 @@
 menuconfig ARCH_NOMADIK
 	bool "ST-Ericsson Nomadik"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select ARM_AMBA
 	select ARM_VIC
 	select CLKSRC_NOMADIK_MTU
-	select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
 	select CPU_ARM926T
 	select GPIOLIB
 	select MFD_SYSCON
diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig
index 7f7002dc2b21..63b42a19d1b8 100644
--- a/arch/arm/mach-npcm/Kconfig
+++ b/arch/arm/mach-npcm/Kconfig
@@ -1,11 +1,22 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_NPCM
 	bool "Nuvoton NPCM Architecture"
-	depends on ARCH_MULTI_V7
+	depends on (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN) || ARCH_MULTI_V7
 	select PINCTRL
 
 if ARCH_NPCM
 
+config ARCH_WPCM450
+	bool "Support for WPCM450 BMC (Hermon)"
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+	select WPCM450_AIC
+	select NPCM7XX_TIMER
+	help
+	  General support for WPCM450 BMC (Hermon).
+
+	  Winbond/Nuvoton WPCM450 BMC based on the ARM926EJ-S.
+
 config ARCH_NPCM7XX
 	bool "Support for NPCM7xx BMC (Poleg)"
 	depends on ARCH_MULTI_V7
diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile
index 1bc3a70bfab8..ac83e1caf2ee 100644
--- a/arch/arm/mach-npcm/Makefile
+++ b/arch/arm/mach-npcm/Makefile
@@ -1,5 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-AFLAGS_headsmp.o		+= -march=armv7-a
-
+obj-$(CONFIG_ARCH_WPCM450)	+= wpcm450.o
 obj-$(CONFIG_ARCH_NPCM7XX)	+= npcm7xx.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-npcm/headsmp.S b/arch/arm/mach-npcm/headsmp.S
index c083fe09a07b..84d2b6daaf0b 100644
--- a/arch/arm/mach-npcm/headsmp.S
+++ b/arch/arm/mach-npcm/headsmp.S
@@ -6,6 +6,8 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 
+.arch armv7-a
+
 /*
  * The boot ROM does not start secondary CPUs in SVC mode, so we need to do that
  * here.
diff --git a/arch/arm/mach-npcm/wpcm450.c b/arch/arm/mach-npcm/wpcm450.c
new file mode 100644
index 000000000000..f17b3dab45af
--- /dev/null
+++ b/arch/arm/mach-npcm/wpcm450.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright 2021 Jonathan Neuschäfer
+
+#include <asm/mach/arch.h>
+
+static const char *const wpcm450_dt_match[] = {
+	"nuvoton,wpcm450",
+	NULL
+};
+
+DT_MACHINE_START(WPCM450_DT, "WPCM450 chip")
+	.dt_compat	= wpcm450_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig
index b3d161e8e2fb..b7a3871876d7 100644
--- a/arch/arm/mach-nspire/Kconfig
+++ b/arch/arm/mach-nspire/Kconfig
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config ARCH_NSPIRE
 	bool "TI-NSPIRE based"
-	depends on ARCH_MULTI_V4_V5
-	depends on MMU
+	depends on ARCH_MULTI_V4T
+	depends on CPU_LITTLE_ENDIAN
 	select CPU_ARM926T
 	select GENERIC_IRQ_CHIP
 	select ARM_AMBA
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 9536b8f3c07d..cbf703f0d850 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -1,33 +1,43 @@
 # SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_OMAP1
+	bool "TI OMAP1"
+	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	depends on ATAGS
+	select ARCH_OMAP
+	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_OMAP
+	select CLKSRC_MMIO
+	select FORCE_PCI if PCCARD
+	select GPIOLIB
+	help
+	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
+
 if ARCH_OMAP1
 
 menu "TI OMAP1 specific features"
 
 comment "OMAP Core Type"
 
-config ARCH_OMAP730
-	bool "OMAP730 Based System"
-	select ARCH_OMAP_OTG
-	select CPU_ARM926T
-	select OMAP_MPU_TIMER
-
-config ARCH_OMAP850
-	bool "OMAP850 Based System"
-	select ARCH_OMAP_OTG
-	select CPU_ARM926T
-
 config ARCH_OMAP15XX
+	depends on ARCH_MULTI_V4T
 	default y
 	bool "OMAP15xx Based System"
 	select CPU_ARM925T
 	select OMAP_MPU_TIMER
 
 config ARCH_OMAP16XX
+	depends on ARCH_MULTI_V5
 	bool "OMAP16xx Based System"
 	select ARCH_OMAP_OTG
 	select CPU_ARM926T
 	select OMAP_DM_TIMER
 
+config ARCH_OMAP
+	bool
+
+comment "OMAP Feature Selections"
+
 config OMAP_MUX
 	bool "OMAP multiplexing support"
 	default y
@@ -53,63 +63,62 @@ config OMAP_MUX_WARNINGS
 	  to change the pin multiplexing setup.	 When there are no warnings
 	  printed, it's safe to deselect OMAP_MUX for your product.
 
-comment "OMAP Board Type"
+config OMAP_32K_TIMER
+	bool "Use 32KHz timer"
+	depends on ARCH_OMAP16XX
+	default ARCH_OMAP16XX
+	help
+	  Select this option if you want to enable the OMAP 32KHz timer.
+	  This timer saves power compared to the OMAP_MPU_TIMER, and has
+	  support for no tick during idle. The 32KHz timer provides less
+	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
+	  currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
+
+	  On OMAP2PLUS this value is only used for CONFIG_HZ and
+	  CLOCK_TICK_RATE compile time calculation.
+	  The actual timer selection is done in the board file
+	  through the (DT_)MACHINE_START structure.
+
+config OMAP_MPU_TIMER
+	bool "Use mpu timer"
+	depends on ARCH_OMAP1
+	help
+	  Select this option if you want to use the OMAP mpu timer. This
+	  timer provides more intra-tick resolution than the 32KHz timer,
+	  but consumes more power.
 
-config MACH_OMAP_INNOVATOR
-	bool "TI Innovator"
-	depends on ARCH_OMAP15XX || ARCH_OMAP16XX
+config OMAP_SERIAL_WAKE
+	bool "Enable wake-up events for serial ports"
+	depends on ARCH_OMAP1 && OMAP_MUX
+	default y
 	help
-          TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
-          have such a board.
+	  Select this option if you want to have your system wake up
+	  to data on the serial RX line. This allows you to wake the
+	  system from serial console.
 
-config MACH_OMAP_H2
-	bool "TI H2 Support"
-	depends on ARCH_OMAP16XX
-    	help
-	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
-	  a board.
+config OMAP_RESET_CLOCKS
+	bool "Reset unused clocks during boot"
+	depends on ARCH_OMAP
+	help
+	  Say Y if you want to reset unused clocks during boot.
+	  This option saves power, but assumes all drivers are
+	  using the clock framework. Broken drivers that do not
+	  yet use clock framework may not work with this option.
+	  If you are booting from another operating system, you
+	  probably do not want this option enabled until your
+	  device drivers work properly.
 
-config MACH_OMAP_H3
-	bool "TI H3 Support"
-	depends on ARCH_OMAP16XX
-    	help
-	  TI OMAP 1710 H3 board support. Say Y here if you have such
-	  a board.
+config ARCH_OMAP_OTG
+	bool
 
-config MACH_HERALD
-	bool "HTC Herald"
-	depends on ARCH_OMAP850
-	help
-	  HTC Herald smartphone support (AKA T-Mobile Wing, ...)
+comment "OMAP Board Type"
 
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
 	depends on ARCH_OMAP16XX
-    	help
+	help
 	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
-          if you have such a board.
-
-config OMAP_OSK_MISTRAL
-	bool "Mistral QVGA board Support"
-	depends on MACH_OMAP_OSK
-    	help
-	  The OSK supports an optional add-on board with a Quarter-VGA
-	  touchscreen, PDA-ish buttons, a resume button, bicolor LED,
-	  and camera connector.  Say Y here if you have this board.
-
-config MACH_OMAP_PERSEUS2
-	bool "TI Perseus2"
-	depends on ARCH_OMAP730
-    	help
-	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
-	  a board.
-
-config MACH_OMAP_FSAMPLE
-	bool "TI F-Sample"
-	depends on ARCH_OMAP730
-    	help
-	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
-	  a board.
+	  if you have such a board.
 
 config MACH_OMAP_PALMTE
 	bool "Palm Tungsten E"
@@ -120,24 +129,6 @@ config MACH_OMAP_PALMTE
 	  http://palmtelinux.sourceforge.net/ for more information.
 	  Say Y here if you have this PDA model, say N otherwise.
 
-config MACH_OMAP_PALMZ71
-	bool "Palm Zire71"
-	depends on ARCH_OMAP15XX
-	help
-	 Support for the Palm Zire71 PDA. To boot the kernel,
-	 you'll need a PalmOS compatible bootloader; check out
-	 http://hackndev.com/palm/z71 for more information.
-	 Say Y here if you have such a PDA, say N otherwise.
-
-config MACH_OMAP_PALMTT
-	bool "Palm Tungsten|T"
-	depends on ARCH_OMAP15XX
-	help
-	  Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
-	  need a PalmOS compatible bootloader (Garux); check out
-	  http://garux.sourceforge.net/ for more information.
-	  Say Y here if you have this PDA model, say N otherwise.
-
 config MACH_SX1
 	bool "Siemens SX1"
 	depends on ARCH_OMAP15XX
@@ -169,15 +160,6 @@ config MACH_AMS_DELTA
 	  Support for the Amstrad E3 (codename Delta) videophone. Say Y here
 	  if you have such a device.
 
-config MACH_OMAP_GENERIC
-	bool "Generic OMAP board"
-	depends on ARCH_OMAP15XX || ARCH_OMAP16XX
-	help
-          Support for generic OMAP-1510, 1610 or 1710 board with
-          no FPGA. Can be used as template for porting Linux to
-          custom OMAP boards. Say Y here if you have a custom
-          board.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index c757a52d0801..d9e251ea4773 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -5,7 +5,7 @@
 
 # Common support
 obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
-	 serial.o devices.o dma.o fb.o
+	 serial.o devices.o dma.o omap-dma.o fb.o
 obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
 
 ifneq ($(CONFIG_SND_SOC_OMAP_MCBSP),)
@@ -29,35 +29,13 @@ usb-fs-$(CONFIG_USB_SUPPORT)		:= usb.o
 obj-y					+= $(usb-fs-m) $(usb-fs-y)
 
 # Specific board support
-obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o \
-					   board-nand.o
-obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
-obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
-obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o board-nand.o
-obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o board-nand.o
 obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
-obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o board-h3-mmc.o \
-					   board-nand.o
 obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
-obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
-obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
 obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
 obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o ams-delta-fiq.o \
 					   ams-delta-fiq-handler.o
 obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
-obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o
-
-ifeq ($(CONFIG_ARCH_OMAP15XX),y)
-# Innovator-1510 FPGA
-obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
-endif
 
 # GPIO
-obj-$(CONFIG_ARCH_OMAP730)		+= gpio7xx.o
-obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
 obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
 obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
-
-ifneq ($(CONFIG_FB_OMAP),)
-obj-y += lcd_dma.o
-endif
diff --git a/arch/arm/mach-omap1/Makefile.boot b/arch/arm/mach-omap1/Makefile.boot
deleted file mode 100644
index 2c771515a606..000000000000
--- a/arch/arm/mach-omap1/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y		+= 0x10008000
-params_phys-y		:= 0x10000100
-initrd_phys-y		:= 0x10800000
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 14a6c3eb3298..35c2f9574dbd 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -13,13 +13,15 @@
 #include <linux/linkage.h>
 #include <linux/platform_data/ams-delta-fiq.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/assembler.h>
+#include <asm/irq.h>
 
+#include "hardware.h"
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"
 #include "iomap.h"
-#include "soc.h"
 
 /*
  * OMAP1510 GPIO related symbol copied from arch/arm/mach-omap1/gpio15xx.c.
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index 4eea3e39e633..1f5852be057e 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -21,7 +21,9 @@
 #include <linux/platform_device.h>
 
 #include <asm/fiq.h>
+#include <linux/soc/ti/omap1-io.h>
 
+#include "hardware.h"
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"
 
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.h b/arch/arm/mach-omap1/ams-delta-fiq.h
index fd76df3cce37..7f843caedb7c 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/ams-delta-fiq.h
@@ -16,7 +16,7 @@
 #ifndef __AMS_DELTA_FIQ_H
 #define __AMS_DELTA_FIQ_H
 
-#include <mach/irqs.h>
+#include "irqs.h"
 
 /*
  * Interrupt number used for passing control from FIQ to IRQ.
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 2ee527c00284..9108c871d129 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -28,6 +28,7 @@
 #include <linux/omapfb.h>
 #include <linux/io.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/soc/ti/omap1-mux.h>
 
 #include <asm/serial.h>
 #include <asm/mach-types.h>
@@ -35,11 +36,9 @@
 #include <asm/mach/map.h>
 
 #include <linux/platform_data/keypad-omap.h>
-#include <mach/mux.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
 
+#include "hardware.h"
+#include "usb.h"
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"
 #include "iomap.h"
@@ -407,9 +406,6 @@ static struct gpio_led gpio_leds[] __initdata = {
 	[LATCH1_PIN_LED_CAMERA] = {
 		.name		 = "camera",
 		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
-#ifdef CONFIG_LEDS_TRIGGERS
-		.default_trigger = "ams_delta_camera",
-#endif
 	},
 	[LATCH1_PIN_LED_ADVERT] = {
 		.name		 = "advert",
@@ -456,24 +452,6 @@ static struct gpiod_lookup_table leds_gpio_table = {
 	},
 };
 
-#ifdef CONFIG_LEDS_TRIGGERS
-DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
-
-static int ams_delta_camera_power(struct device *dev, int power)
-{
-	/*
-	 * turn on camera LED
-	 */
-	if (power)
-		led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
-	else
-		led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
-	return 0;
-}
-#else
-#define ams_delta_camera_power	NULL
-#endif
-
 static struct platform_device ams_delta_audio_device = {
 	.name   = "ams-delta-audio",
 	.id     = -1,
@@ -686,7 +664,7 @@ static void __init ams_delta_latch2_init(void)
 {
 	u16 latch2 = 1 << LATCH2_PIN_MODEM_NRESET | 1 << LATCH2_PIN_MODEM_CODEC;
 
-	__raw_writew(latch2, LATCH2_VIRT);
+	__raw_writew(latch2, IOMEM(LATCH2_VIRT));
 }
 
 static void __init ams_delta_init(void)
@@ -719,10 +697,6 @@ static void __init ams_delta_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 
 	omap1_usb_init(&ams_delta_usb_config);
-#ifdef CONFIG_LEDS_TRIGGERS
-	led_trigger_register_simple("ams_delta_camera",
-			&ams_delta_camera_led_trigger);
-#endif
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 
 	/*
@@ -848,8 +822,6 @@ static int __init modem_nreset_init(void)
  */
 static int __init ams_delta_modem_init(void)
 {
-	int err;
-
 	if (!machine_is_ams_delta())
 		return -ENODEV;
 
@@ -858,9 +830,7 @@ static int __init ams_delta_modem_init(void)
 	/* Initialize the modem_nreset regulator consumer before use */
 	modem_priv.regulator = ERR_PTR(-ENODEV);
 
-	err = platform_device_register(&ams_delta_modem_device);
-
-	return err;
+	return platform_device_register(&ams_delta_modem_device);
 }
 arch_initcall_sync(ams_delta_modem_init);
 
@@ -897,7 +867,7 @@ static void __init ams_delta_init_late(void)
 
 static void __init ams_delta_map_io(void)
 {
-	omap15xx_map_io();
+	omap1_map_io();
 	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
 }
 
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
deleted file mode 100644
index c3aa6f2e5546..000000000000
--- a/arch/arm/mach-omap1/board-fsample.c
+++ /dev/null
@@ -1,366 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-fsample.c
- *
- * Modified from board-perseus2.c
- *
- * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
- * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/tc.h>
-#include <mach/mux.h>
-#include "flash.h"
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
-
-#include "iomap.h"
-#include "common.h"
-#include "fpga.h"
-
-/* fsample is pretty close to p2-sample */
-
-#define fsample_cpld_read(reg) __raw_readb(reg)
-#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
-
-#define FSAMPLE_CPLD_BASE    0xE8100000
-#define FSAMPLE_CPLD_SIZE    SZ_4K
-#define FSAMPLE_CPLD_START   0x05080000
-
-#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
-#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
-#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
-#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
-
-#define FSAMPLE_CPLD_BIT_BT_RESET         0
-#define FSAMPLE_CPLD_BIT_LCD_RESET        1
-#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
-#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
-#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
-#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
-#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
-#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
-#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
-#define FSAMPLE_CPLD_BIT_OTG_RESET        9
-
-#define fsample_cpld_set(bit) \
-    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
-
-#define fsample_cpld_clear(bit) \
-    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
-
-static const unsigned int fsample_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_LEFT),
-	KEY(3, 0, KEY_DOWN),
-	KEY(4, 0, KEY_ENTER),
-	KEY(0, 1, KEY_F10),
-	KEY(1, 1, KEY_SEND),
-	KEY(2, 1, KEY_END),
-	KEY(3, 1, KEY_VOLUMEDOWN),
-	KEY(4, 1, KEY_VOLUMEUP),
-	KEY(5, 1, KEY_RECORD),
-	KEY(0, 2, KEY_F9),
-	KEY(1, 2, KEY_3),
-	KEY(2, 2, KEY_6),
-	KEY(3, 2, KEY_9),
-	KEY(4, 2, KEY_KPDOT),
-	KEY(0, 3, KEY_BACK),
-	KEY(1, 3, KEY_2),
-	KEY(2, 3, KEY_5),
-	KEY(3, 3, KEY_8),
-	KEY(4, 3, KEY_0),
-	KEY(5, 3, KEY_KPSLASH),
-	KEY(0, 4, KEY_HOME),
-	KEY(1, 4, KEY_1),
-	KEY(2, 4, KEY_4),
-	KEY(3, 4, KEY_7),
-	KEY(4, 4, KEY_KPASTERISK),
-	KEY(5, 4, KEY_POWER),
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
-		.end	= H2P2_DBG_FPGA_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_7XX_MPU_EXT_NIRQ,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static void __init fsample_init_smc91x(void)
-{
-	__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-	__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
-		   H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-}
-
-static struct mtd_partition nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* rest of flash is a file system */
-	{
-	      .name		= "rootfs",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	},
-};
-
-static struct physmap_flash_data nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= nor_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_partitions),
-};
-
-static struct resource nor_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nor_resource,
-};
-
-#define FSAMPLE_NAND_RB_GPIO_PIN	62
-
-static int nand_dev_ready(struct nand_chip *chip)
-{
-	return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN);
-}
-
-static struct platform_nand_data nand_data = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= omap1_nand_cmd_ctl,
-		.dev_ready	= nand_dev_ready,
-	},
-};
-
-static struct resource nand_resource = {
-	.start		= OMAP_CS3_PHYS,
-	.end		= OMAP_CS3_PHYS + SZ_4K - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nand_resource,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource kp_resources[] = {
-	[0] = {
-		.start	= INT_7XX_MPUIO_KEYPAD,
-		.end	= INT_7XX_MPUIO_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data fsample_keymap_data = {
-	.keymap		= fsample_keymap,
-	.keymap_size	= ARRAY_SIZE(fsample_keymap),
-};
-
-static struct omap_kp_platform_data kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &fsample_keymap_data,
-	.delay		= 4,
-};
-
-static struct platform_device kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(kp_resources),
-	.resource	= kp_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&nor_device,
-	&nand_device,
-	&smc91x_device,
-	&kp_device,
-};
-
-static const struct omap_lcd_config fsample_lcd_config = {
-	.ctrl_name	= "internal",
-};
-
-static void __init omap_fsample_init(void)
-{
-	/* Early, board-dependent init */
-
-	/*
-	 * Hold GSM Reset until needed
-	 */
-	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
-
-	/*
-	 * UARTs -> done automagically by 8250 driver
-	 */
-
-	/*
-	 * CSx timings, GPIO Mux ... setup
-	 */
-
-	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
-
-	/*
-	 * Ethernet support through the debug board
-	 * CS1 timings setup
-	 */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
-
-	/*
-	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
-	 * It is used as the Ethernet controller interrupt
-	 */
-	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
-			OMAP7XX_IO_CONF_9);
-
-	fsample_init_smc91x();
-
-	BUG_ON(gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0);
-	gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
-
-	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
-	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(E2_7XX_KBR0);
-	omap_cfg_reg(J7_7XX_KBR1);
-	omap_cfg_reg(E1_7XX_KBR2);
-	omap_cfg_reg(F3_7XX_KBR3);
-	omap_cfg_reg(D2_7XX_KBR4);
-	omap_cfg_reg(C2_7XX_KBC0);
-	omap_cfg_reg(D3_7XX_KBC1);
-	omap_cfg_reg(E4_7XX_KBC2);
-	omap_cfg_reg(F4_7XX_KBC3);
-	omap_cfg_reg(E3_7XX_KBC4);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	omapfb_set_lcd_config(&fsample_lcd_config);
-}
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc omap_fsample_io_desc[] __initdata = {
-	{
-		.virtual	= H2P2_DBG_FPGA_BASE,
-		.pfn		= __phys_to_pfn(H2P2_DBG_FPGA_START),
-		.length		= H2P2_DBG_FPGA_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= FSAMPLE_CPLD_BASE,
-		.pfn		= __phys_to_pfn(FSAMPLE_CPLD_START),
-		.length		= FSAMPLE_CPLD_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init omap_fsample_map_io(void)
-{
-	omap15xx_map_io();
-	iotable_init(omap_fsample_io_desc,
-		     ARRAY_SIZE(omap_fsample_io_desc));
-}
-
-MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
-/* Maintainer: Brian Swetland <swetland@google.com> */
-	.atag_offset	= 0x100,
-	.map_io		= omap_fsample_map_io,
-	.init_early	= omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_fsample_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
deleted file mode 100644
index c62554990115..000000000000
--- a/arch/arm/mach-omap1/board-generic.c
+++ /dev/null
@@ -1,87 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-generic.c
- *
- * Modified from board-innovator1510.c
- *
- * Code for generic OMAP board. Should work on many OMAP systems where
- * the device drivers take care of all the necessary hardware initialization.
- * Do not put any board specific code to this file; create a new machine
- * type if you need custom low-level initializations.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/mux.h>
-
-#include <mach/usb.h>
-
-#include "common.h"
-
-/* assume no Mini-AB port */
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static struct omap_usb_config generic1510_usb_config __initdata = {
-	.register_host	= 1,
-	.register_dev	= 1,
-	.hmc_mode	= 16,
-	.pins[0]	= 3,
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-static struct omap_usb_config generic1610_usb_config __initdata = {
-#ifdef CONFIG_USB_OTG
-	.otg		= 1,
-#endif
-	.register_host	= 1,
-	.register_dev	= 1,
-	.hmc_mode	= 16,
-	.pins[0]	= 6,
-};
-#endif
-
-static void __init omap_generic_init(void)
-{
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap15xx()) {
-		/* mux pins for uarts */
-		omap_cfg_reg(UART1_TX);
-		omap_cfg_reg(UART1_RTS);
-		omap_cfg_reg(UART2_TX);
-		omap_cfg_reg(UART2_RTS);
-		omap_cfg_reg(UART3_TX);
-		omap_cfg_reg(UART3_RX);
-
-		omap1_usb_init(&generic1510_usb_config);
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
-	if (!cpu_is_omap1510()) {
-		omap1_usb_init(&generic1610_usb_config);
-	}
-#endif
-
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-}
-
-MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
-	/* Maintainer: Tony Lindgren <tony@atomide.com> */
-	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
-	.init_early	= omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_generic_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
deleted file mode 100644
index 06c5404078aa..000000000000
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-h2-mmc.c
- *
- * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
- * Author: Felipe Balbi <felipe.lima@indt.org.br>
- *
- * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is:
- * Copyright (C) 2006 Nokia Corporation
- */
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/mfd/tps65010.h>
-
-#include "board-h2.h"
-#include "mmc.h"
-
-#if IS_ENABLED(CONFIG_MMC_OMAP)
-
-static int mmc_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on);
-	return 0;
-}
-
-static int mmc_late_init(struct device *dev)
-{
-	int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
-	if (ret < 0)
-		return ret;
-
-	gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0);
-
-	return ret;
-}
-
-static void mmc_cleanup(struct device *dev)
-{
-	gpio_free(H2_TPS_GPIO_MMC_PWR_EN);
-}
-
-/*
- * H2 could use the following functions tested:
- * - mmc_get_cover_state that uses OMAP_MPUIO(1)
- * - mmc_get_wp that uses OMAP_MPUIO(3)
- */
-static struct omap_mmc_platform_data mmc1_data = {
-	.nr_slots                       = 1,
-	.init				= mmc_late_init,
-	.cleanup			= mmc_cleanup,
-	.slots[0]       = {
-		.set_power              = mmc_set_power,
-		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
-		.name                   = "mmcblk",
-	},
-};
-
-static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
-
-void __init h2_mmc_init(void)
-{
-	mmc_data[0] = &mmc1_data;
-	omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC);
-}
-
-#else
-
-void __init h2_mmc_init(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
deleted file mode 100644
index c40cf5ef8607..000000000000
--- a/arch/arm/mach-omap1/board-h2.c
+++ /dev/null
@@ -1,448 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-h2.c
- *
- * Board specific inits for OMAP-1610 H2
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * H2 specific changes and cleanup
- * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
- */
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/mfd/tps65010.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/mux.h>
-#include <linux/omap-dma.h>
-#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-#include "flash.h"
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
-#include "common.h"
-#include "board-h2.h"
-
-/* The first 16 SoC GPIO lines are on this GPIO chip */
-#define OMAP_GPIO_LABEL			"gpio-0-15"
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define OMAP1610_ETHR_START		0x04000300
-
-static const unsigned int h2_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_3),
-	KEY(3, 0, KEY_F10),
-	KEY(4, 0, KEY_F5),
-	KEY(5, 0, KEY_9),
-	KEY(0, 1, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(2, 1, KEY_2),
-	KEY(3, 1, KEY_F9),
-	KEY(4, 1, KEY_F7),
-	KEY(5, 1, KEY_0),
-	KEY(0, 2, KEY_ENTER),
-	KEY(1, 2, KEY_6),
-	KEY(2, 2, KEY_1),
-	KEY(3, 2, KEY_F2),
-	KEY(4, 2, KEY_F6),
-	KEY(5, 2, KEY_HOME),
-	KEY(0, 3, KEY_8),
-	KEY(1, 3, KEY_5),
-	KEY(2, 3, KEY_F12),
-	KEY(3, 3, KEY_F3),
-	KEY(4, 3, KEY_F8),
-	KEY(5, 3, KEY_END),
-	KEY(0, 4, KEY_7),
-	KEY(1, 4, KEY_4),
-	KEY(2, 4, KEY_F11),
-	KEY(3, 4, KEY_F1),
-	KEY(4, 4, KEY_F4),
-	KEY(5, 4, KEY_ESC),
-	KEY(0, 5, KEY_F13),
-	KEY(1, 5, KEY_F14),
-	KEY(2, 5, KEY_F15),
-	KEY(3, 5, KEY_F16),
-	KEY(4, 5, KEY_SLEEP),
-};
-
-static struct mtd_partition h2_nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* file system */
-	{
-	      .name		= "filesystem",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data h2_nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= h2_nor_partitions,
-	.nr_parts	= ARRAY_SIZE(h2_nor_partitions),
-};
-
-static struct resource h2_nor_resource = {
-	/* This is on CS3, wherever it's mapped */
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device h2_nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &h2_nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &h2_nor_resource,
-};
-
-static struct mtd_partition h2_nand_partitions[] = {
-#if 0
-	/* REVISIT:  enable these partitions if you make NAND BOOT
-	 * work on your H2 (rev C or newer); published versions of
-	 * x-load only support P2 and H3.
-	 */
-	{
-		.name		= "xloader",
-		.offset		= 0,
-		.size		= 64 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "bootloader",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 256 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 192 * 1024,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * SZ_1M,
-	},
-#endif
-	{
-		.name		= "filesystem",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	},
-};
-
-#define H2_NAND_RB_GPIO_PIN	62
-
-static int h2_nand_dev_ready(struct nand_chip *chip)
-{
-	return gpio_get_value(H2_NAND_RB_GPIO_PIN);
-}
-
-static struct platform_nand_data h2_nand_platdata = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.nr_partitions		= ARRAY_SIZE(h2_nand_partitions),
-		.partitions		= h2_nand_partitions,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= omap1_nand_cmd_ctl,
-		.dev_ready	= h2_nand_dev_ready,
-	},
-};
-
-static struct resource h2_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device h2_nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &h2_nand_platdata,
-	},
-	.num_resources	= 1,
-	.resource	= &h2_nand_resource,
-};
-
-static struct smc91x_platdata h2_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource h2_smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP1610_ETHR_START,		/* Physical */
-		.end	= OMAP1610_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device h2_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &h2_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(h2_smc91x_resources),
-	.resource	= h2_smc91x_resources,
-};
-
-static struct resource h2_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data h2_keymap_data = {
-	.keymap		= h2_keymap,
-	.keymap_size	= ARRAY_SIZE(h2_keymap),
-};
-
-static struct omap_kp_platform_data h2_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &h2_keymap_data,
-	.rep		= true,
-	.delay		= 9,
-	.dbounce	= true,
-};
-
-static struct platform_device h2_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &h2_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(h2_kp_resources),
-	.resource	= h2_kp_resources,
-};
-
-static const struct gpio_led h2_gpio_led_pins[] = {
-	{
-		.name		= "h2:red",
-		.default_trigger = "heartbeat",
-		.gpio		= 3,
-	},
-	{
-		.name		= "h2:green",
-		.default_trigger = "cpu0",
-		.gpio		= OMAP_MPUIO(4),
-	},
-};
-
-static struct gpio_led_platform_data h2_gpio_led_data = {
-	.leds		= h2_gpio_led_pins,
-	.num_leds	= ARRAY_SIZE(h2_gpio_led_pins),
-};
-
-static struct platform_device h2_gpio_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &h2_gpio_led_data,
-	},
-};
-
-static struct platform_device *h2_devices[] __initdata = {
-	&h2_nor_device,
-	&h2_nand_device,
-	&h2_smc91x_device,
-	&h2_kp_device,
-	&h2_gpio_leds,
-};
-
-static void __init h2_init_smc91x(void)
-{
-	if (gpio_request(0, "SMC91x irq") < 0) {
-		printk("Error requesting gpio 0 for smc91x irq\n");
-		return;
-	}
-}
-
-static int tps_setup(struct i2c_client *client, void *context)
-{
-	if (!IS_BUILTIN(CONFIG_TPS65010))
-		return -ENOSYS;
-	
-	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
-				TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
-
-	return 0;
-}
-
-static struct tps65010_board tps_board = {
-	.base		= H2_TPS_GPIO_BASE,
-	.outmask	= 0x0f,
-	.setup		= tps_setup,
-};
-
-static struct i2c_board_info __initdata h2_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("tps65010", 0x48),
-		.platform_data	= &tps_board,
-	}, {
-		.type = "isp1301_omap",
-		.addr = 0x2d,
-		.dev_name = "isp1301",
-	},
-};
-
-static struct gpiod_lookup_table isp1301_gpiod_table = {
-	.dev_id = "isp1301",
-	.table = {
-		/* Active low since the irq triggers on falling edge */
-		GPIO_LOOKUP(OMAP_GPIO_LABEL, 2,
-			    NULL, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct omap_usb_config h2_usb_config __initdata = {
-	/* usb1 has a Mini-AB port and external isp1301 transceiver */
-	.otg		= 2,
-
-#if IS_ENABLED(CONFIG_USB_OMAP)
-	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
-	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	IS_ENABLED(CONFIG_USB_OHCI_HCD)
-	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
-	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
-#endif
-
-	.pins[1]	= 3,
-};
-
-static const struct omap_lcd_config h2_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-
-static void __init h2_init(void)
-{
-	h2_init_smc91x();
-
-	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
-	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
-	 * notice whether a NAND chip is enabled at probe time.
-	 *
-	 * FIXME revC boards (and H3) support NAND-boot, with a dip switch to
-	 * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3.  Try
-	 * detecting that in code here, to avoid probing every possible flash
-	 * configuration...
-	 */
-	h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
-	h2_nor_resource.end += SZ_32M - 1;
-
-	h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
-	h2_nand_resource.end += SZ_4K - 1;
-	BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
-	gpio_direction_input(H2_NAND_RB_GPIO_PIN);
-
-	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
-	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
-	/* MMC:  card detect and WP */
-	/* omap_cfg_reg(U19_ARMIO1); */		/* CD */
-	omap_cfg_reg(BALLOUT_V8_ARMIO3);	/* WP */
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(F18_1610_KBC0);
-	omap_cfg_reg(D20_1610_KBC1);
-	omap_cfg_reg(D19_1610_KBC2);
-	omap_cfg_reg(E18_1610_KBC3);
-	omap_cfg_reg(C21_1610_KBC4);
-	omap_cfg_reg(G18_1610_KBR0);
-	omap_cfg_reg(F19_1610_KBR1);
-	omap_cfg_reg(H14_1610_KBR2);
-	omap_cfg_reg(E20_1610_KBR3);
-	omap_cfg_reg(E19_1610_KBR4);
-	omap_cfg_reg(N19_1610_KBR5);
-
-	/* GPIO based LEDs */
-	omap_cfg_reg(P18_1610_GPIO3);
-	omap_cfg_reg(MPUIO4);
-
-	h2_smc91x_resources[1].start = gpio_to_irq(0);
-	h2_smc91x_resources[1].end = gpio_to_irq(0);
-	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
-	omap_serial_init();
-
-	/* ISP1301 IRQ wired at M14 */
-	omap_cfg_reg(M14_1510_GPIO2);
-	h2_i2c_board_info[0].irq = gpio_to_irq(58);
-	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
-			      ARRAY_SIZE(h2_i2c_board_info));
-	omap1_usb_init(&h2_usb_config);
-	h2_mmc_init();
-
-	omapfb_set_lcd_config(&h2_lcd_config);
-}
-
-MACHINE_START(OMAP_H2, "TI-H2")
-	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
-	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= h2_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2.h b/arch/arm/mach-omap1/board-h2.h
deleted file mode 100644
index 315e2662547e..000000000000
--- a/arch/arm/mach-omap1/board-h2.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * arch/arm/mach-omap1/board-h2.h
- *
- * Hardware definitions for TI OMAP1610 H2 board.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_H2_H
-#define __ASM_ARCH_OMAP_H2_H
-
-#define H2_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define H2_TPS_GPIO_MMC_PWR_EN	(H2_TPS_GPIO_BASE + 3)
-
-extern void h2_mmc_init(void);
-
-#endif /*  __ASM_ARCH_OMAP_H2_H */
-
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
deleted file mode 100644
index f595bd4f5024..000000000000
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-h3-mmc.c
- *
- * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
- * Author: Felipe Balbi <felipe.lima@indt.org.br>
- *
- * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is:
- * Copyright (C) 2006 Nokia Corporation
- */
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <linux/mfd/tps65010.h>
-
-#include "common.h"
-#include "board-h3.h"
-#include "mmc.h"
-
-#if IS_ENABLED(CONFIG_MMC_OMAP)
-
-static int mmc_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on);
-	return 0;
-}
-
-/*
- * H3 could use the following functions tested:
- * - mmc_get_cover_state that uses OMAP_MPUIO(1)
- * - mmc_get_wp that maybe uses OMAP_MPUIO(3)
- */
-static struct omap_mmc_platform_data mmc1_data = {
-	.nr_slots                       = 1,
-	.slots[0]       = {
-		.set_power              = mmc_set_power,
-		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
-		.name                   = "mmcblk",
-	},
-};
-
-static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
-
-void __init h3_mmc_init(void)
-{
-	int ret;
-
-	ret = gpio_request(H3_TPS_GPIO_MMC_PWR_EN, "MMC power");
-	if (ret < 0)
-		return;
-	gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
-
-	mmc_data[0] = &mmc1_data;
-	omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC);
-}
-
-#else
-
-void __init h3_mmc_init(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
deleted file mode 100644
index 4249984f9c30..000000000000
--- a/arch/arm/mach-omap1/board-h3.c
+++ /dev/null
@@ -1,457 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-h3.c
- *
- * This file contains OMAP1710 H3 specific code.
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- * Copyright (C) 2002 MontaVista Software, Inc.
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *         Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
- */
-#include <linux/gpio.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/errno.h>
-#include <linux/workqueue.h>
-#include <linux/i2c.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/tps65010.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/leds.h>
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-#include <linux/omap-dma.h>
-#include "flash.h"
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/usb.h>
-
-#include "common.h"
-#include "board-h3.h"
-
-/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
-#define OMAP1710_ETHR_START		0x04000300
-
-#define H3_TS_GPIO	48
-
-static const unsigned int h3_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_3),
-	KEY(3, 0, KEY_F10),
-	KEY(4, 0, KEY_F5),
-	KEY(5, 0, KEY_9),
-	KEY(0, 1, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(2, 1, KEY_2),
-	KEY(3, 1, KEY_F9),
-	KEY(4, 1, KEY_F7),
-	KEY(5, 1, KEY_0),
-	KEY(0, 2, KEY_ENTER),
-	KEY(1, 2, KEY_6),
-	KEY(2, 2, KEY_1),
-	KEY(3, 2, KEY_F2),
-	KEY(4, 2, KEY_F6),
-	KEY(5, 2, KEY_HOME),
-	KEY(0, 3, KEY_8),
-	KEY(1, 3, KEY_5),
-	KEY(2, 3, KEY_F12),
-	KEY(3, 3, KEY_F3),
-	KEY(4, 3, KEY_F8),
-	KEY(5, 3, KEY_END),
-	KEY(0, 4, KEY_7),
-	KEY(1, 4, KEY_4),
-	KEY(2, 4, KEY_F11),
-	KEY(3, 4, KEY_F1),
-	KEY(4, 4, KEY_F4),
-	KEY(5, 4, KEY_ESC),
-	KEY(0, 5, KEY_F13),
-	KEY(1, 5, KEY_F14),
-	KEY(2, 5, KEY_F15),
-	KEY(3, 5, KEY_F16),
-	KEY(4, 5, KEY_SLEEP),
-};
-
-
-static struct mtd_partition nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* file system */
-	{
-	      .name		= "filesystem",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= nor_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_partitions),
-};
-
-static struct resource nor_resource = {
-	/* This is on CS3, wherever it's mapped */
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nor_resource,
-};
-
-static struct mtd_partition nand_partitions[] = {
-#if 0
-	/* REVISIT: enable these partitions if you make NAND BOOT work */
-	{
-		.name		= "xloader",
-		.offset		= 0,
-		.size		= 64 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "bootloader",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 256 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 192 * 1024,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * SZ_1M,
-	},
-#endif
-	{
-		.name		= "filesystem",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	},
-};
-
-#define H3_NAND_RB_GPIO_PIN	10
-
-static int nand_dev_ready(struct nand_chip *chip)
-{
-	return gpio_get_value(H3_NAND_RB_GPIO_PIN);
-}
-
-static struct platform_nand_data nand_platdata = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.nr_partitions		= ARRAY_SIZE(nand_partitions),
-		.partitions		= nand_partitions,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= omap1_nand_cmd_ctl,
-		.dev_ready	= nand_dev_ready,
-
-	},
-};
-
-static struct resource nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nand_platdata,
-	},
-	.num_resources	= 1,
-	.resource	= &nand_resource,
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP1710_ETHR_START,		/* Physical */
-		.end	= OMAP1710_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static void __init h3_init_smc91x(void)
-{
-	omap_cfg_reg(W15_1710_GPIO40);
-	if (gpio_request(40, "SMC91x irq") < 0) {
-		printk("Error requesting gpio 40 for smc91x irq\n");
-		return;
-	}
-}
-
-#define GPTIMER_BASE		0xFFFB1400
-#define GPTIMER_REGS(x)	(0xFFFB1400 + (x * 0x800))
-#define GPTIMER_REGS_SIZE	0x46
-
-static struct resource intlat_resources[] = {
-	[0] = {
-		.start  = GPTIMER_REGS(0),	      /* Physical */
-		.end    = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = INT_1610_GPTIMER1,
-		.end    = INT_1610_GPTIMER1,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device intlat_device = {
-	.name	   = "omap_intlat",
-	.id	     = 0,
-	.num_resources  = ARRAY_SIZE(intlat_resources),
-	.resource       = intlat_resources,
-};
-
-static struct resource h3_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data h3_keymap_data = {
-	.keymap		= h3_keymap,
-	.keymap_size	= ARRAY_SIZE(h3_keymap),
-};
-
-static struct omap_kp_platform_data h3_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &h3_keymap_data,
-	.rep		= true,
-	.delay		= 9,
-	.dbounce	= true,
-};
-
-static struct platform_device h3_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &h3_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(h3_kp_resources),
-	.resource	= h3_kp_resources,
-};
-
-static struct platform_device h3_lcd_device = {
-	.name		= "lcd_h3",
-	.id		= -1,
-};
-
-static struct spi_board_info h3_spi_board_info[] __initdata = {
-	[0] = {
-		.modalias	= "tsc2101",
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.max_speed_hz	= 16000000,
-		/* .platform_data	= &tsc_platform_data, */
-	},
-};
-
-static const struct gpio_led h3_gpio_led_pins[] = {
-	{
-		.name		= "h3:red",
-		.default_trigger = "heartbeat",
-		.gpio		= 3,
-	},
-	{
-		.name		= "h3:green",
-		.default_trigger = "cpu0",
-		.gpio		= OMAP_MPUIO(4),
-	},
-};
-
-static struct gpio_led_platform_data h3_gpio_led_data = {
-	.leds		= h3_gpio_led_pins,
-	.num_leds	= ARRAY_SIZE(h3_gpio_led_pins),
-};
-
-static struct platform_device h3_gpio_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &h3_gpio_led_data,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&nor_device,
-	&nand_device,
-        &smc91x_device,
-	&intlat_device,
-	&h3_kp_device,
-	&h3_lcd_device,
-	&h3_gpio_leds,
-};
-
-static struct omap_usb_config h3_usb_config __initdata = {
-	/* usb1 has a Mini-AB port and external isp1301 transceiver */
-	.otg	    = 2,
-
-#if IS_ENABLED(CONFIG_USB_OMAP)
-	.hmc_mode       = 19,   /* 0:host(off) 1:dev|otg 2:disabled */
-#elif IS_ENABLED(CONFIG_USB_OHCI_HCD)
-	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
-	.hmc_mode       = 20,   /* 1:dev|otg(off) 1:host 2:disabled */
-#endif
-
-	.pins[1]	= 3,
-};
-
-static const struct omap_lcd_config h3_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-
-static struct i2c_board_info __initdata h3_i2c_board_info[] = {
-       {
-		I2C_BOARD_INFO("tps65013", 0x48),
-       },
-	{
-		I2C_BOARD_INFO("isp1301_omap", 0x2d),
-	},
-};
-
-static void __init h3_init(void)
-{
-	h3_init_smc91x();
-
-	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
-	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
-	 * notice whether a NAND chip is enabled at probe time.
-	 *
-	 * H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND
-	 * (which on H2 may be 16bit) on CS3.  Try detecting that in code here,
-	 * to avoid probing every possible flash configuration...
-	 */
-	nor_resource.end = nor_resource.start = omap_cs3_phys();
-	nor_resource.end += SZ_32M - 1;
-
-	nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
-	nand_resource.end += SZ_4K - 1;
-	BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0);
-	gpio_direction_input(H3_NAND_RB_GPIO_PIN);
-
-	/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
-	/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
-	omap_cfg_reg(V2_1710_GPIO10);
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(F18_1610_KBC0);
-	omap_cfg_reg(D20_1610_KBC1);
-	omap_cfg_reg(D19_1610_KBC2);
-	omap_cfg_reg(E18_1610_KBC3);
-	omap_cfg_reg(C21_1610_KBC4);
-	omap_cfg_reg(G18_1610_KBR0);
-	omap_cfg_reg(F19_1610_KBR1);
-	omap_cfg_reg(H14_1610_KBR2);
-	omap_cfg_reg(E20_1610_KBR3);
-	omap_cfg_reg(E19_1610_KBR4);
-	omap_cfg_reg(N19_1610_KBR5);
-
-	/* GPIO based LEDs */
-	omap_cfg_reg(P18_1610_GPIO3);
-	omap_cfg_reg(MPUIO4);
-
-	smc91x_resources[1].start = gpio_to_irq(40);
-	smc91x_resources[1].end = gpio_to_irq(40);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO);
-	spi_register_board_info(h3_spi_board_info,
-				ARRAY_SIZE(h3_spi_board_info));
-	omap_serial_init();
-	h3_i2c_board_info[1].irq = gpio_to_irq(14);
-	omap_register_i2c_bus(1, 100, h3_i2c_board_info,
-			      ARRAY_SIZE(h3_i2c_board_info));
-	omap1_usb_init(&h3_usb_config);
-	h3_mmc_init();
-
-	omapfb_set_lcd_config(&h3_lcd_config);
-}
-
-MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
-	/* Maintainer: Texas Instruments, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= h3_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3.h b/arch/arm/mach-omap1/board-h3.h
deleted file mode 100644
index 78de535be3c5..000000000000
--- a/arch/arm/mach-omap1/board-h3.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-omap1/board-h3.h
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_H3_H
-#define __ASM_ARCH_OMAP_H3_H
-
-#define H3_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define H3_TPS_GPIO_MMC_PWR_EN	(H3_TPS_GPIO_BASE + 4)
-
-extern void h3_mmc_init(void);
-
-#endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
deleted file mode 100644
index 258304edf23e..000000000000
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ /dev/null
@@ -1,594 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * HTC Herald board configuration
- * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
- * Copyright (C) 2009 Wing Linux
- *
- * Based on the board-htcwizard.c file from the linwizard project:
- * Copyright (C) 2006 Unai Uribarri
- * Copyright (C) 2008 linwizard.sourceforge.net
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-gpio.h>
-#include <linux/htcpld.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/omapfb.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/omap7xx.h>
-#include "mmc.h"
-
-#include <mach/irqs.h>
-#include <mach/usb.h>
-
-#include "common.h"
-
-/* LCD register definition */
-#define       OMAP_LCDC_CONTROL               (0xfffec000 + 0x00)
-#define       OMAP_LCDC_STATUS                (0xfffec000 + 0x10)
-#define       OMAP_DMA_LCD_CCR                (0xfffee300 + 0xc2)
-#define       OMAP_DMA_LCD_CTRL               (0xfffee300 + 0xc4)
-#define       OMAP_LCDC_CTRL_LCD_EN           (1 << 0)
-#define       OMAP_LCDC_STAT_DONE             (1 << 0)
-
-/* GPIO definitions for the power button and keyboard slide switch */
-#define HTCHERALD_GPIO_POWER 139
-#define HTCHERALD_GPIO_SLIDE 174
-#define HTCHERALD_GIRQ_BTNS 141
-
-/* GPIO definitions for the touchscreen */
-#define HTCHERALD_GPIO_TS 76
-
-/* HTCPLD definitions */
-
-/*
- * CPLD Logic
- *
- * Chip 3 - 0x03
- *
- * Function            7 6 5 4  3 2 1 0
- * ------------------------------------
- * DPAD light          x x x x  x x x 1
- * SoundDev            x x x x  1 x x x
- * Screen white        1 x x x  x x x x
- * MMC power on        x x x x  x 1 x x
- * Happy times (n)     0 x x x  x 1 x x
- *
- * Chip 4 - 0x04
- *
- * Function            7 6 5 4  3 2 1 0
- * ------------------------------------
- * Keyboard light      x x x x  x x x 1
- * LCD Bright (4)      x x x x  x 1 1 x
- * LCD Bright (3)      x x x x  x 0 1 x
- * LCD Bright (2)      x x x x  x 1 0 x
- * LCD Bright (1)      x x x x  x 0 0 x
- * LCD Off             x x x x  0 x x x
- * LCD image (fb)      1 x x x  x x x x
- * LCD image (white)   0 x x x  x x x x
- * Caps lock LED       x x 1 x  x x x x
- *
- * Chip 5 - 0x05
- *
- * Function            7 6 5 4  3 2 1 0
- * ------------------------------------
- * Red (solid)         x x x x  x 1 x x
- * Red (flash)         x x x x  x x 1 x
- * Green (GSM flash)   x x x x  1 x x x
- * Green (GSM solid)   x x x 1  x x x x
- * Green (wifi flash)  x x 1 x  x x x x
- * Blue (bt flash)     x 1 x x  x x x x
- * DPAD Int Enable     1 x x x  x x x 0
- *
- * (Combinations of the above can be made for different colors.)
- * The direction pad interrupt enable must be set each time the
- * interrupt is handled.
- *
- * Chip 6 - 0x06
- *
- * Function            7 6 5 4  3 2 1 0
- * ------------------------------------
- * Vibrator            x x x x  1 x x x
- * Alt LED             x x x 1  x x x x
- * Screen white        1 x x x  x x x x
- * Screen white        x x 1 x  x x x x
- * Screen white        x 0 x x  x x x x
- * Enable kbd dpad     x x x x  x x 0 x
- * Happy Times         0 1 0 x  x x 0 x
- */
-
-/*
- * HTCPLD GPIO lines start 16 after OMAP_MAX_GPIO_LINES to account
- * for the 16 MPUIO lines.
- */
-#define HTCPLD_GPIO_START_OFFSET	(OMAP_MAX_GPIO_LINES + 16)
-#define HTCPLD_IRQ(chip, offset)	(OMAP_IRQ_END + 8 * (chip) + (offset))
-#define HTCPLD_BASE(chip, offset)	\
-	(HTCPLD_GPIO_START_OFFSET + 8 * (chip) + (offset))
-
-#define HTCPLD_GPIO_LED_DPAD		HTCPLD_BASE(0, 0)
-#define HTCPLD_GPIO_LED_KBD		HTCPLD_BASE(1, 0)
-#define HTCPLD_GPIO_LED_CAPS		HTCPLD_BASE(1, 5)
-#define HTCPLD_GPIO_LED_RED_FLASH	HTCPLD_BASE(2, 1)
-#define HTCPLD_GPIO_LED_RED_SOLID	HTCPLD_BASE(2, 2)
-#define HTCPLD_GPIO_LED_GREEN_FLASH	HTCPLD_BASE(2, 3)
-#define HTCPLD_GPIO_LED_GREEN_SOLID	HTCPLD_BASE(2, 4)
-#define HTCPLD_GPIO_LED_WIFI		HTCPLD_BASE(2, 5)
-#define HTCPLD_GPIO_LED_BT		HTCPLD_BASE(2, 6)
-#define HTCPLD_GPIO_LED_VIBRATE		HTCPLD_BASE(3, 3)
-#define HTCPLD_GPIO_LED_ALT		HTCPLD_BASE(3, 4)
-
-#define HTCPLD_GPIO_RIGHT_KBD		HTCPLD_BASE(6, 7)
-#define HTCPLD_GPIO_UP_KBD		HTCPLD_BASE(6, 6)
-#define HTCPLD_GPIO_LEFT_KBD		HTCPLD_BASE(6, 5)
-#define HTCPLD_GPIO_DOWN_KBD		HTCPLD_BASE(6, 4)
-
-#define HTCPLD_GPIO_RIGHT_DPAD		HTCPLD_BASE(7, 7)
-#define HTCPLD_GPIO_UP_DPAD		HTCPLD_BASE(7, 6)
-#define HTCPLD_GPIO_LEFT_DPAD		HTCPLD_BASE(7, 5)
-#define HTCPLD_GPIO_DOWN_DPAD		HTCPLD_BASE(7, 4)
-#define HTCPLD_GPIO_ENTER_DPAD		HTCPLD_BASE(7, 3)
-
-/*
- * The htcpld chip requires a gpio write to a specific line
- * to re-enable interrupts after one has occurred.
- */
-#define HTCPLD_GPIO_INT_RESET_HI	HTCPLD_BASE(2, 7)
-#define HTCPLD_GPIO_INT_RESET_LO	HTCPLD_BASE(2, 0)
-
-/* Chip 5 */
-#define HTCPLD_IRQ_RIGHT_KBD		HTCPLD_IRQ(0, 7)
-#define HTCPLD_IRQ_UP_KBD		HTCPLD_IRQ(0, 6)
-#define HTCPLD_IRQ_LEFT_KBD		HTCPLD_IRQ(0, 5)
-#define HTCPLD_IRQ_DOWN_KBD		HTCPLD_IRQ(0, 4)
-
-/* Chip 6 */
-#define HTCPLD_IRQ_RIGHT_DPAD		HTCPLD_IRQ(1, 7)
-#define HTCPLD_IRQ_UP_DPAD		HTCPLD_IRQ(1, 6)
-#define HTCPLD_IRQ_LEFT_DPAD		HTCPLD_IRQ(1, 5)
-#define HTCPLD_IRQ_DOWN_DPAD		HTCPLD_IRQ(1, 4)
-#define HTCPLD_IRQ_ENTER_DPAD		HTCPLD_IRQ(1, 3)
-
-/* Keyboard definition */
-
-static const unsigned int htc_herald_keymap[] = {
-	KEY(0, 0, KEY_RECORD), /* Mail button */
-	KEY(1, 0, KEY_CAMERA), /* Camera */
-	KEY(2, 0, KEY_PHONE), /* Send key */
-	KEY(3, 0, KEY_VOLUMEUP), /* Volume up */
-	KEY(4, 0, KEY_F2),  /* Right bar (landscape) */
-	KEY(5, 0, KEY_MAIL), /* Win key (portrait) */
-	KEY(6, 0, KEY_DIRECTORY), /* Right bar (protrait) */
-	KEY(0, 1, KEY_LEFTCTRL), /* Windows key */
-	KEY(1, 1, KEY_COMMA),
-	KEY(2, 1, KEY_M),
-	KEY(3, 1, KEY_K),
-	KEY(4, 1, KEY_SLASH), /* OK key */
-	KEY(5, 1, KEY_I),
-	KEY(6, 1, KEY_U),
-	KEY(0, 2, KEY_LEFTALT),
-	KEY(1, 2, KEY_TAB),
-	KEY(2, 2, KEY_N),
-	KEY(3, 2, KEY_J),
-	KEY(4, 2, KEY_ENTER),
-	KEY(5, 2, KEY_H),
-	KEY(6, 2, KEY_Y),
-	KEY(0, 3, KEY_SPACE),
-	KEY(1, 3, KEY_L),
-	KEY(2, 3, KEY_B),
-	KEY(3, 3, KEY_V),
-	KEY(4, 3, KEY_BACKSPACE),
-	KEY(5, 3, KEY_G),
-	KEY(6, 3, KEY_T),
-	KEY(0, 4, KEY_CAPSLOCK), /* Shift */
-	KEY(1, 4, KEY_C),
-	KEY(2, 4, KEY_F),
-	KEY(3, 4, KEY_R),
-	KEY(4, 4, KEY_O),
-	KEY(5, 4, KEY_E),
-	KEY(6, 4, KEY_D),
-	KEY(0, 5, KEY_X),
-	KEY(1, 5, KEY_Z),
-	KEY(2, 5, KEY_S),
-	KEY(3, 5, KEY_W),
-	KEY(4, 5, KEY_P),
-	KEY(5, 5, KEY_Q),
-	KEY(6, 5, KEY_A),
-	KEY(0, 6, KEY_CONNECT), /* Voice button */
-	KEY(2, 6, KEY_CANCEL), /* End key */
-	KEY(3, 6, KEY_VOLUMEDOWN), /* Volume down */
-	KEY(4, 6, KEY_F1), /* Left bar (landscape) */
-	KEY(5, 6, KEY_WWW), /* OK button (portrait) */
-	KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */
-};
-
-static const struct matrix_keymap_data htc_herald_keymap_data = {
-	.keymap		= htc_herald_keymap,
-	.keymap_size	= ARRAY_SIZE(htc_herald_keymap),
-};
-
-static struct omap_kp_platform_data htcherald_kp_data = {
-	.rows	= 7,
-	.cols	= 7,
-	.delay = 20,
-	.rep = true,
-	.keymap_data = &htc_herald_keymap_data,
-};
-
-static struct resource kp_resources[] = {
-	[0] = {
-		.start	= INT_7XX_MPUIO_KEYPAD,
-		.end	= INT_7XX_MPUIO_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &htcherald_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(kp_resources),
-	.resource	= kp_resources,
-};
-
-/* GPIO buttons for keyboard slide and power button */
-static struct gpio_keys_button herald_gpio_keys_table[] = {
-	{BTN_0,  HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20},
-	{SW_LID, HTCHERALD_GPIO_SLIDE, 0, "SLIDE", EV_SW,  1, 20},
-
-	{KEY_LEFT,  HTCPLD_GPIO_LEFT_KBD,  1, "LEFT",  EV_KEY, 1, 20},
-	{KEY_RIGHT, HTCPLD_GPIO_RIGHT_KBD, 1, "RIGHT", EV_KEY, 1, 20},
-	{KEY_UP,    HTCPLD_GPIO_UP_KBD,    1, "UP",    EV_KEY, 1, 20},
-	{KEY_DOWN,  HTCPLD_GPIO_DOWN_KBD,  1, "DOWN",  EV_KEY, 1, 20},
-
-	{KEY_LEFT,  HTCPLD_GPIO_LEFT_DPAD,   1, "DLEFT",  EV_KEY, 1, 20},
-	{KEY_RIGHT, HTCPLD_GPIO_RIGHT_DPAD,  1, "DRIGHT", EV_KEY, 1, 20},
-	{KEY_UP,    HTCPLD_GPIO_UP_DPAD,     1, "DUP",    EV_KEY, 1, 20},
-	{KEY_DOWN,  HTCPLD_GPIO_DOWN_DPAD,   1, "DDOWN",  EV_KEY, 1, 20},
-	{KEY_ENTER, HTCPLD_GPIO_ENTER_DPAD,  1, "DENTER", EV_KEY, 1, 20},
-};
-
-static struct gpio_keys_platform_data herald_gpio_keys_data = {
-	.buttons	= herald_gpio_keys_table,
-	.nbuttons	= ARRAY_SIZE(herald_gpio_keys_table),
-	.rep		= true,
-};
-
-static struct platform_device herald_gpiokeys_device = {
-	.name      = "gpio-keys",
-	.id		= -1,
-	.dev = {
-		.platform_data = &herald_gpio_keys_data,
-	},
-};
-
-/* LEDs for the Herald.  These connect to the HTCPLD GPIO device. */
-static const struct gpio_led gpio_leds[] = {
-	{"dpad",        NULL, HTCPLD_GPIO_LED_DPAD,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"kbd",         NULL, HTCPLD_GPIO_LED_KBD,         0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"vibrate",     NULL, HTCPLD_GPIO_LED_VIBRATE,     0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"green_solid", NULL, HTCPLD_GPIO_LED_GREEN_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"green_flash", NULL, HTCPLD_GPIO_LED_GREEN_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"red_solid",   "mmc0", HTCPLD_GPIO_LED_RED_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"red_flash",   NULL, HTCPLD_GPIO_LED_RED_FLASH,   0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"wifi",        NULL, HTCPLD_GPIO_LED_WIFI,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"bt",          NULL, HTCPLD_GPIO_LED_BT,          0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"caps",        NULL, HTCPLD_GPIO_LED_CAPS,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"alt",         NULL, HTCPLD_GPIO_LED_ALT,         0, 0, LEDS_GPIO_DEFSTATE_OFF},
-};
-
-static struct gpio_led_platform_data gpio_leds_data = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device gpio_leds_device = {
-	.name		= "leds-gpio",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &gpio_leds_data,
-	},
-};
-
-/* HTC PLD chips */
-
-static struct resource htcpld_resources[] = {
-	[0] = {
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct htcpld_chip_platform_data htcpld_chips[] = {
-	[0] = {
-		.addr		= 0x03,
-		.reset		= 0x04,
-		.num_gpios	= 8,
-		.gpio_out_base	= HTCPLD_BASE(0, 0),
-		.gpio_in_base	= HTCPLD_BASE(4, 0),
-	},
-	[1] = {
-		.addr		= 0x04,
-		.reset		= 0x8e,
-		.num_gpios	= 8,
-		.gpio_out_base	= HTCPLD_BASE(1, 0),
-		.gpio_in_base	= HTCPLD_BASE(5, 0),
-	},
-	[2] = {
-		.addr		= 0x05,
-		.reset		= 0x80,
-		.num_gpios	= 8,
-		.gpio_out_base	= HTCPLD_BASE(2, 0),
-		.gpio_in_base	= HTCPLD_BASE(6, 0),
-		.irq_base	= HTCPLD_IRQ(0, 0),
-		.num_irqs	= 8,
-	},
-	[3] = {
-		.addr		= 0x06,
-		.reset		= 0x40,
-		.num_gpios	= 8,
-		.gpio_out_base	= HTCPLD_BASE(3, 0),
-		.gpio_in_base	= HTCPLD_BASE(7, 0),
-		.irq_base	= HTCPLD_IRQ(1, 0),
-		.num_irqs	= 8,
-	},
-};
-
-static struct htcpld_core_platform_data htcpld_pfdata = {
-	.int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI,
-	.int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO,
-	.i2c_adapter_id	   = 1,
-
-	.chip		   = htcpld_chips,
-	.num_chip	   = ARRAY_SIZE(htcpld_chips),
-};
-
-static struct platform_device htcpld_device = {
-	.name		= "i2c-htcpld",
-	.id		= -1,
-	.resource	= htcpld_resources,
-	.num_resources	= ARRAY_SIZE(htcpld_resources),
-	.dev	= {
-		.platform_data	= &htcpld_pfdata,
-	},
-};
-
-/* USB Device */
-static struct omap_usb_config htcherald_usb_config __initdata = {
-	.otg = 0,
-	.register_host = 0,
-	.register_dev  = 1,
-	.hmc_mode = 4,
-	.pins[0] = 2,
-};
-
-/* LCD Device resources */
-static const struct omap_lcd_config htcherald_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-
-static struct platform_device lcd_device = {
-	.name           = "lcd_htcherald",
-	.id             = -1,
-};
-
-/* MMC Card */
-#if IS_ENABLED(CONFIG_MMC_OMAP)
-static struct omap_mmc_platform_data htc_mmc1_data = {
-	.nr_slots                       = 1,
-	.switch_slot                    = NULL,
-	.slots[0]       = {
-		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
-		.name                   = "mmcblk",
-		.nomux                  = 1,
-		.wires                  = 4,
-		.switch_pin             = -1,
-	},
-};
-
-static struct omap_mmc_platform_data *htc_mmc_data[1];
-#endif
-
-
-/* Platform devices for the Herald */
-static struct platform_device *devices[] __initdata = {
-	&kp_device,
-	&lcd_device,
-	&htcpld_device,
-	&gpio_leds_device,
-	&herald_gpiokeys_device,
-};
-
-/*
- * Touchscreen
- */
-static const struct ads7846_platform_data htcherald_ts_platform_data = {
-	.model			= 7846,
-	.keep_vref_on		= 1,
-	.x_plate_ohms		= 496,
-	.gpio_pendown		= HTCHERALD_GPIO_TS,
-	.pressure_max		= 10000,
-	.pressure_min		= 5000,
-	.x_min			= 528,
-	.x_max			= 3760,
-	.y_min			= 624,
-	.y_max			= 3760,
-};
-
-static struct spi_board_info __initdata htcherald_spi_board_info[] = {
-	{
-		.modalias		= "ads7846",
-		.platform_data		= &htcherald_ts_platform_data,
-		.max_speed_hz		= 2500000,
-		.bus_num		= 2,
-		.chip_select		= 1,
-	}
-};
-
-/*
- * Init functions from here on
- */
-
-static void __init htcherald_lcd_init(void)
-{
-	u32 reg;
-	unsigned int tries = 200;
-
-	/* disable controller if active */
-	reg = omap_readl(OMAP_LCDC_CONTROL);
-	if (reg & OMAP_LCDC_CTRL_LCD_EN) {
-		reg &= ~OMAP_LCDC_CTRL_LCD_EN;
-		omap_writel(reg, OMAP_LCDC_CONTROL);
-
-		/* wait for end of frame */
-		while (!(omap_readl(OMAP_LCDC_STATUS) & OMAP_LCDC_STAT_DONE)) {
-			tries--;
-			if (!tries)
-				break;
-		}
-		if (!tries)
-			pr_err("Timeout waiting for end of frame -- LCD may not be available\n");
-
-		/* turn off DMA */
-		reg = omap_readw(OMAP_DMA_LCD_CCR);
-		reg &= ~(1 << 7);
-		omap_writew(reg, OMAP_DMA_LCD_CCR);
-
-		reg = omap_readw(OMAP_DMA_LCD_CTRL);
-		reg &= ~(1 << 8);
-		omap_writew(reg, OMAP_DMA_LCD_CTRL);
-	}
-}
-
-static void __init htcherald_map_io(void)
-{
-	omap7xx_map_io();
-
-	/*
-	 * The LCD panel must be disabled and DMA turned off here, as doing
-	 * it later causes the LCD never to reinitialize.
-	 */
-	htcherald_lcd_init();
-
-	printk(KERN_INFO "htcherald_map_io done.\n");
-}
-
-static void __init htcherald_disable_watchdog(void)
-{
-	/* Disable watchdog if running */
-	if (omap_readl(OMAP_WDT_TIMER_MODE) & 0x8000) {
-		/*
-		 * disable a potentially running watchdog timer before
-		 * it kills us.
-		 */
-		printk(KERN_WARNING "OMAP850 Watchdog seems to be activated, disabling it for now.\n");
-		omap_writel(0xF5, OMAP_WDT_TIMER_MODE);
-		omap_writel(0xA0, OMAP_WDT_TIMER_MODE);
-	}
-}
-
-#define HTCHERALD_GPIO_USB_EN1 33
-#define HTCHERALD_GPIO_USB_EN2 73
-#define HTCHERALD_GPIO_USB_DM  35
-#define HTCHERALD_GPIO_USB_DP  36
-
-static void __init htcherald_usb_enable(void)
-{
-	unsigned int tries = 20;
-	unsigned int value = 0;
-
-	/* Request the GPIOs we need to control here */
-	if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0)
-		goto err1;
-
-	if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0)
-		goto err2;
-
-	if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0)
-		goto err3;
-
-	if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0)
-		goto err4;
-
-	/* force USB_EN GPIO to 0 */
-	do {
-		/* output low */
-		gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0);
-	} while ((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 &&
-			--tries);
-
-	if (value == 1)
-		printk(KERN_WARNING "Unable to reset USB, trying to continue\n");
-
-	gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */
-	gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */
-	gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */
-
-	goto done;
-
-err4:
-	gpio_free(HTCHERALD_GPIO_USB_DM);
-err3:
-	gpio_free(HTCHERALD_GPIO_USB_EN2);
-err2:
-	gpio_free(HTCHERALD_GPIO_USB_EN1);
-err1:
-	printk(KERN_ERR "Unabled to request GPIO for USB\n");
-done:
-	printk(KERN_INFO "USB setup complete.\n");
-}
-
-static void __init htcherald_init(void)
-{
-	printk(KERN_INFO "HTC Herald init.\n");
-
-	/* Do board initialization before we register all the devices */
-	htcpld_resources[0].start = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
-	htcpld_resources[0].end = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	htcherald_disable_watchdog();
-
-	htcherald_usb_enable();
-	omap1_usb_init(&htcherald_usb_config);
-
-	htcherald_spi_board_info[0].irq = gpio_to_irq(HTCHERALD_GPIO_TS);
-	spi_register_board_info(htcherald_spi_board_info,
-		ARRAY_SIZE(htcherald_spi_board_info));
-
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-#if IS_ENABLED(CONFIG_MMC_OMAP)
-	htc_mmc_data[0] = &htc_mmc1_data;
-	omap1_init_mmc(htc_mmc_data, 1);
-#endif
-
-	omapfb_set_lcd_config(&htcherald_lcd_config);
-}
-
-MACHINE_START(HERALD, "HTC Herald")
-	/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
-	/* Maintainer: wing-linux.sourceforge.net */
-	.atag_offset    = 0x100,
-	.map_io         = htcherald_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq       = omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine   = htcherald_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
deleted file mode 100644
index cbe093f969d5..000000000000
--- a/arch/arm/mach-omap1/board-innovator.c
+++ /dev/null
@@ -1,461 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-innovator.c
- *
- * Board specific inits for OMAP-1510 and OMAP-1610 Innovator
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/mux.h>
-#include "flash.h"
-#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
-#include "iomap.h"
-#include "common.h"
-#include "mmc.h"
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define INNOVATOR1610_ETHR_START	0x04000300
-
-static const unsigned int innovator_keymap[] = {
-	KEY(0, 0, KEY_F1),
-	KEY(3, 0, KEY_DOWN),
-	KEY(1, 1, KEY_F2),
-	KEY(2, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_F3),
-	KEY(1, 2, KEY_F4),
-	KEY(2, 2, KEY_UP),
-	KEY(2, 3, KEY_ENTER),
-	KEY(3, 3, KEY_LEFT),
-};
-
-static struct mtd_partition innovator_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* rest of flash1 is a file system */
-	{
-	      .name		= "rootfs",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_16M - SZ_2M - 2 * SZ_128K,
-	      .mask_flags	= 0
-	},
-	/* file system */
-	{
-	      .name		= "filesystem",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data innovator_flash_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= innovator_partitions,
-	.nr_parts	= ARRAY_SIZE(innovator_partitions),
-};
-
-static struct resource innovator_flash_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device innovator_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &innovator_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &innovator_flash_resource,
-};
-
-static struct resource innovator_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data innovator_keymap_data = {
-	.keymap		= innovator_keymap,
-	.keymap_size	= ARRAY_SIZE(innovator_keymap),
-};
-
-static struct omap_kp_platform_data innovator_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &innovator_keymap_data,
-	.delay		= 4,
-};
-
-static struct platform_device innovator_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &innovator_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(innovator_kp_resources),
-	.resource	= innovator_kp_resources,
-};
-
-static struct smc91x_platdata innovator_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-#ifdef CONFIG_ARCH_OMAP15XX
-
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc innovator1510_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP1510_FPGA_BASE,
-		.pfn		= __phys_to_pfn(OMAP1510_FPGA_START),
-		.length		= OMAP1510_FPGA_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static struct resource innovator1510_smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP1510_FPGA_ETHR_START,	/* Physical */
-		.end	= OMAP1510_FPGA_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= OMAP1510_INT_ETHER,
-		.end	= OMAP1510_INT_ETHER,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device innovator1510_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &innovator_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(innovator1510_smc91x_resources),
-	.resource	= innovator1510_smc91x_resources,
-};
-
-static struct platform_device innovator1510_lcd_device = {
-	.name		= "lcd_inn1510",
-	.id		= -1,
-};
-
-static struct platform_device innovator1510_spi_device = {
-	.name		= "spi_inn1510",
-	.id		= -1,
-};
-
-static struct platform_device *innovator1510_devices[] __initdata = {
-	&innovator_flash_device,
-	&innovator1510_smc91x_device,
-	&innovator_kp_device,
-	&innovator1510_lcd_device,
-	&innovator1510_spi_device,
-};
-
-static int innovator_get_pendown_state(void)
-{
-	return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
-}
-
-static const struct ads7846_platform_data innovator1510_ts_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.get_pendown_state	= innovator_get_pendown_state,
-};
-
-static struct spi_board_info __initdata innovator1510_boardinfo[] = { {
-	/* FPGA (bus "10") CS0 has an ads7846e */
-	.modalias		= "ads7846",
-	.platform_data		= &innovator1510_ts_info,
-	.irq			= OMAP1510_INT_FPGA_TS,
-	.max_speed_hz		= 120000 /* max sample rate at 3V */
-					* 26 /* command + data + overhead */,
-	.bus_num		= 10,
-	.chip_select		= 0,
-} };
-
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-#ifdef CONFIG_ARCH_OMAP16XX
-
-static struct resource innovator1610_smc91x_resources[] = {
-	[0] = {
-		.start	= INNOVATOR1610_ETHR_START,		/* Physical */
-		.end	= INNOVATOR1610_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device innovator1610_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &innovator_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(innovator1610_smc91x_resources),
-	.resource	= innovator1610_smc91x_resources,
-};
-
-static struct platform_device innovator1610_lcd_device = {
-	.name		= "inn1610_lcd",
-	.id		= -1,
-};
-
-static struct platform_device *innovator1610_devices[] __initdata = {
-	&innovator_flash_device,
-	&innovator1610_smc91x_device,
-	&innovator_kp_device,
-	&innovator1610_lcd_device,
-};
-
-#endif /* CONFIG_ARCH_OMAP16XX */
-
-static void __init innovator_init_smc91x(void)
-{
-	if (cpu_is_omap1510()) {
-		__raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
-			   OMAP1510_FPGA_RST);
-		udelay(750);
-	} else {
-		if (gpio_request(0, "SMC91x irq") < 0) {
-			printk("Error requesting gpio 0 for smc91x irq\n");
-			return;
-		}
-	}
-}
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static struct omap_usb_config innovator1510_usb_config __initdata = {
-	/* for bundled non-standard host and peripheral cables */
-	.hmc_mode	= 4,
-
-	.register_host	= 1,
-	.pins[1]	= 6,
-	.pins[2]	= 6,		/* Conflicts with UART2 */
-
-	.register_dev	= 1,
-	.pins[0]	= 2,
-};
-
-static const struct omap_lcd_config innovator1510_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP16XX
-static struct omap_usb_config h2_usb_config __initdata = {
-	/* usb1 has a Mini-AB port and external isp1301 transceiver */
-	.otg		= 2,
-
-#if IS_ENABLED(CONFIG_USB_OMAP)
-	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
-	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	IS_ENABLED(CONFIG_USB_OHCI_HCD)
-	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
-	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
-#endif
-
-	.pins[1]	= 3,
-};
-
-static const struct omap_lcd_config innovator1610_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MMC_OMAP)
-
-static int mmc_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	if (power_on)
-		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
-				OMAP1510_FPGA_POWER);
-	else
-		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
-				OMAP1510_FPGA_POWER);
-
-	return 0;
-}
-
-/*
- * Innovator could use the following functions tested:
- * - mmc_get_wp that uses OMAP_MPUIO(3)
- * - mmc_get_cover_state that uses FPGA F4 UIO43
- */
-static struct omap_mmc_platform_data mmc1_data = {
-	.nr_slots                       = 1,
-	.slots[0]       = {
-		.set_power		= mmc_set_power,
-		.wires			= 4,
-		.name                   = "mmcblk",
-	},
-};
-
-static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
-
-static void __init innovator_mmc_init(void)
-{
-	mmc_data[0] = &mmc1_data;
-	omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);
-}
-
-#else
-static inline void innovator_mmc_init(void)
-{
-}
-#endif
-
-static void __init innovator_init(void)
-{
-	if (cpu_is_omap1510())
-		omap1510_fpga_init_irq();
-	innovator_init_smc91x();
-
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap1510()) {
-		unsigned char reg;
-
-		/* mux pins for uarts */
-		omap_cfg_reg(UART1_TX);
-		omap_cfg_reg(UART1_RTS);
-		omap_cfg_reg(UART2_TX);
-		omap_cfg_reg(UART2_RTS);
-		omap_cfg_reg(UART3_TX);
-		omap_cfg_reg(UART3_RX);
-
-		reg = __raw_readb(OMAP1510_FPGA_POWER);
-		reg |= OMAP1510_FPGA_PCR_COM1_EN;
-		__raw_writeb(reg, OMAP1510_FPGA_POWER);
-		udelay(10);
-
-		reg = __raw_readb(OMAP1510_FPGA_POWER);
-		reg |= OMAP1510_FPGA_PCR_COM2_EN;
-		__raw_writeb(reg, OMAP1510_FPGA_POWER);
-		udelay(10);
-
-		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
-		spi_register_board_info(innovator1510_boardinfo,
-				ARRAY_SIZE(innovator1510_boardinfo));
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	if (!cpu_is_omap1510()) {
-		innovator1610_smc91x_resources[1].start = gpio_to_irq(0);
-		innovator1610_smc91x_resources[1].end = gpio_to_irq(0);
-		platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
-	}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap1510()) {
-		omap1_usb_init(&innovator1510_usb_config);
-		omapfb_set_lcd_config(&innovator1510_lcd_config);
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	if (cpu_is_omap1610()) {
-		omap1_usb_init(&h2_usb_config);
-		omapfb_set_lcd_config(&innovator1610_lcd_config);
-	}
-#endif
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-	innovator_mmc_init();
-}
-
-/*
- * REVISIT: Assume 15xx for now, we don't want to do revision check
- * until later on. The right way to fix this is to set up a different
- * machine_id for 16xx Innovator, or use device tree.
- */
-static void __init innovator_map_io(void)
-{
-#ifdef CONFIG_ARCH_OMAP15XX
-	omap15xx_map_io();
-
-	iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
-	udelay(10);	/* Delay needed for FPGA */
-
-	/* Dump the Innovator FPGA rev early - useful info for support. */
-	pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
-			__raw_readb(OMAP1510_FPGA_REV_HIGH),
-			__raw_readb(OMAP1510_FPGA_REV_LOW),
-			__raw_readb(OMAP1510_FPGA_BOARD_REV));
-#endif
-}
-
-MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
-	/* Maintainer: MontaVista Software, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= innovator_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= innovator_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-nand.c b/arch/arm/mach-omap1/board-nand.c
deleted file mode 100644
index 479ab9be784d..000000000000
--- a/arch/arm/mach-omap1/board-nand.c
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-nand.c
- *
- * Common OMAP1 board NAND code
- *
- * Copyright (C) 2004, 2012 Texas Instruments, Inc.
- * Copyright (C) 2002 MontaVista Software, Inc.
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *         Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
- */
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-
-#include "common.h"
-
-void omap1_nand_cmd_ctl(struct nand_chip *this, int cmd, unsigned int ctrl)
-{
-	unsigned long mask;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
-	if (ctrl & NAND_ALE)
-		mask |= 0x04;
-
-	writeb(cmd, this->legacy.IO_ADDR_W + mask);
-}
-
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 11511ae2e0a2..a501a473ffd6 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -28,11 +28,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
+#include "mux.h"
+#include "hardware.h"
+#include "usb.h"
 #include "common.h"
 #include "clock.h"
 #include "mmc.h"
@@ -290,7 +288,7 @@ static void __init omap_nokia770_init(void)
 
 MACHINE_START(NOKIA770, "Nokia 770")
 	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
+	.map_io		= omap1_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
 	.handle_irq	= omap1_handle_irq,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 0a4c9b0b13b0..df758c1f9237 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -42,18 +42,17 @@
 #include <linux/mfd/tps65010.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/platform_data/omap1_bl.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include "tc.h"
 #include "flash.h"
-#include <mach/mux.h>
-#include <mach/tc.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
+#include "mux.h"
+#include "hardware.h"
+#include "usb.h"
 #include "common.h"
 
 /* Name of the GPIO chip used by the OMAP for GPIOs 0..15 */
@@ -153,14 +152,14 @@ static struct resource osk5912_cf_resources[] = {
 	[0] = {
 		.flags	= IORESOURCE_IRQ,
 	},
+	[1] = {
+		.flags = IORESOURCE_MEM,
+	},
 };
 
 static struct platform_device osk5912_cf_device = {
 	.name		= "omap_cf",
 	.id		= -1,
-	.dev = {
-		.platform_data	= (void *) 2 /* CS2 */,
-	},
 	.num_resources	= ARRAY_SIZE(osk5912_cf_resources),
 	.resource	= osk5912_cf_resources,
 };
@@ -275,13 +274,41 @@ static void __init osk_init_smc91x(void)
 	omap_writel(l, EMIFS_CCS(1));
 }
 
-static void __init osk_init_cf(void)
+static void __init osk_init_cf(int seg)
 {
+	struct resource *res = &osk5912_cf_resources[1];
+
 	omap_cfg_reg(M7_1610_GPIO62);
 	if ((gpio_request(62, "cf_irq")) < 0) {
 		printk("Error requesting gpio 62 for CF irq\n");
 		return;
 	}
+
+	switch (seg) {
+	/* NOTE: CS0 could be configured too ... */
+	case 1:
+		res->start = OMAP_CS1_PHYS;
+		break;
+	case 2:
+		res->start = OMAP_CS2_PHYS;
+		break;
+	case 3:
+		res->start = omap_cs3_phys();
+		break;
+	}
+
+	res->end = res->start + SZ_8K - 1;
+	osk5912_cf_device.dev.platform_data = (void *)(uintptr_t)seg;
+
+	/* NOTE:  better EMIFS setup might support more cards; but the
+	 * TRM only shows how to affect regular flash signals, not their
+	 * CF/PCMCIA variants...
+	 */
+	pr_debug("%s: cs%d, previous ccs %08x acs %08x\n", __func__,
+		seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg)));
+	omap_writel(0x0004a1b3, EMIFS_CCS(seg));	/* synch mode 4 etc */
+	omap_writel(0x00000000, EMIFS_ACS(seg));	/* OE hold/setup */
+
 	/* the CF I/O IRQ is really active-low */
 	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
 }
@@ -312,263 +339,6 @@ static struct omap_usb_config osk_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-static const struct omap_lcd_config osk_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-#endif
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-
-#include <linux/input.h>
-#include <linux/property.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-#include <linux/platform_data/keypad-omap.h>
-
-static const struct property_entry mistral_at24_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 16),
-	{ }
-};
-
-static struct i2c_board_info __initdata mistral_i2c_board_info[] = {
-	{
-		/* NOTE:  powered from LCD supply */
-		I2C_BOARD_INFO("24c04", 0x50),
-		.properties = mistral_at24_properties,
-	},
-	/* TODO when driver support is ready:
-	 *  - optionally ov9640 camera sensor at 0x30
-	 */
-};
-
-static const unsigned int osk_keymap[] = {
-	/* KEY(col, row, code) */
-	KEY(0, 0, KEY_F1),		/* SW4 */
-	KEY(3, 0, KEY_UP),		/* (sw2/up) */
-	KEY(1, 1, KEY_LEFTCTRL),	/* SW5 */
-	KEY(2, 1, KEY_LEFT),		/* (sw2/left) */
-	KEY(0, 2, KEY_SPACE),		/* SW3 */
-	KEY(1, 2, KEY_ESC),		/* SW6 */
-	KEY(2, 2, KEY_DOWN),		/* (sw2/down) */
-	KEY(2, 3, KEY_ENTER),		/* (sw2/select) */
-	KEY(3, 3, KEY_RIGHT),		/* (sw2/right) */
-};
-
-static const struct matrix_keymap_data osk_keymap_data = {
-	.keymap		= osk_keymap,
-	.keymap_size	= ARRAY_SIZE(osk_keymap),
-};
-
-static struct omap_kp_platform_data osk_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &osk_keymap_data,
-	.delay		= 9,
-};
-
-static struct resource osk5912_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device osk5912_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &osk_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(osk5912_kp_resources),
-	.resource	= osk5912_kp_resources,
-};
-
-static struct omap_backlight_config mistral_bl_data = {
-	.default_intensity	= 0xa0,
-};
-
-static struct platform_device mistral_bl_device = {
-	.name		= "omap-bl",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &mistral_bl_data,
-	},
-};
-
-static struct platform_device osk5912_lcd_device = {
-	.name		= "lcd_osk",
-	.id		= -1,
-};
-
-static const struct gpio_led mistral_gpio_led_pins[] = {
-	{
-		.name		= "mistral:red",
-		.default_trigger = "heartbeat",
-		.gpio		= 3,
-	},
-	{
-		.name		= "mistral:green",
-		.default_trigger = "cpu0",
-		.gpio		= OMAP_MPUIO(4),
-	},
-};
-
-static struct gpio_led_platform_data mistral_gpio_led_data = {
-	.leds		= mistral_gpio_led_pins,
-	.num_leds	= ARRAY_SIZE(mistral_gpio_led_pins),
-};
-
-static struct platform_device mistral_gpio_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &mistral_gpio_led_data,
-	},
-};
-
-static struct platform_device *mistral_devices[] __initdata = {
-	&osk5912_kp_device,
-	&mistral_bl_device,
-	&osk5912_lcd_device,
-	&mistral_gpio_leds,
-};
-
-static int mistral_get_pendown_state(void)
-{
-	return !gpio_get_value(4);
-}
-
-static const struct ads7846_platform_data mistral_ts_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.get_pendown_state	= mistral_get_pendown_state,
-};
-
-static struct spi_board_info __initdata mistral_boardinfo[] = { {
-	/* MicroWire (bus 2) CS0 has an ads7846e */
-	.modalias		= "ads7846",
-	.platform_data		= &mistral_ts_info,
-	.max_speed_hz		= 120000 /* max sample rate at 3V */
-					* 26 /* command + data + overhead */,
-	.bus_num		= 2,
-	.chip_select		= 0,
-} };
-
-static irqreturn_t
-osk_mistral_wake_interrupt(int irq, void *ignored)
-{
-	return IRQ_HANDLED;
-}
-
-static void __init osk_mistral_init(void)
-{
-	/* NOTE:  we could actually tell if there's a Mistral board
-	 * attached, e.g. by trying to read something from the ads7846.
-	 * But this arch_init() code is too early for that, since we
-	 * can't talk to the ads or even the i2c eeprom.
-	 */
-
-	/* parallel camera interface */
-	omap_cfg_reg(J15_1610_CAM_LCLK);
-	omap_cfg_reg(J18_1610_CAM_D7);
-	omap_cfg_reg(J19_1610_CAM_D6);
-	omap_cfg_reg(J14_1610_CAM_D5);
-	omap_cfg_reg(K18_1610_CAM_D4);
-	omap_cfg_reg(K19_1610_CAM_D3);
-	omap_cfg_reg(K15_1610_CAM_D2);
-	omap_cfg_reg(K14_1610_CAM_D1);
-	omap_cfg_reg(L19_1610_CAM_D0);
-	omap_cfg_reg(L18_1610_CAM_VS);
-	omap_cfg_reg(L15_1610_CAM_HS);
-	omap_cfg_reg(M19_1610_CAM_RSTZ);
-	omap_cfg_reg(Y15_1610_CAM_OUTCLK);
-
-	/* serial camera interface */
-	omap_cfg_reg(H19_1610_CAM_EXCLK);
-	omap_cfg_reg(W13_1610_CCP_CLKM);
-	omap_cfg_reg(Y12_1610_CCP_CLKP);
-	/* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
-	/* omap_cfg_reg(Y14_1610_CCP_DATAM); */
-	omap_cfg_reg(W14_1610_CCP_DATAP);
-
-	/* CAM_PWDN */
-	if (gpio_request(11, "cam_pwdn") == 0) {
-		omap_cfg_reg(N20_1610_GPIO11);
-		gpio_direction_output(11, 0);
-	} else
-		pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
-
-
-	/* omap_cfg_reg(P19_1610_GPIO6); */	/* BUSY */
-	gpio_request(6, "ts_busy");
-	gpio_direction_input(6);
-
-	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
-	gpio_request(4, "ts_int");
-	gpio_direction_input(4);
-	irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
-
-	mistral_boardinfo[0].irq = gpio_to_irq(4);
-	spi_register_board_info(mistral_boardinfo,
-			ARRAY_SIZE(mistral_boardinfo));
-
-	/* the sideways button (SW1) is for use as a "wakeup" button
-	 *
-	 * NOTE:  The Mistral board has the wakeup button (SW1) wired
-	 * to the LCD 3.3V rail, which is powered down during suspend.
-	 * To allow this button to wake up the omap, work around this
-	 * HW bug by rewiring SW1 to use the main 3.3V rail.
-	 */
-	omap_cfg_reg(N15_1610_MPUIO2);
-	if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) {
-		int ret = 0;
-		int irq = gpio_to_irq(OMAP_MPUIO(2));
-
-		gpio_direction_input(OMAP_MPUIO(2));
-		irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
-		/* share the IRQ in case someone wants to use the
-		 * button for more than wakeup from system sleep.
-		 */
-		ret = request_irq(irq,
-				&osk_mistral_wake_interrupt,
-				IRQF_SHARED, "mistral_wakeup",
-				&osk_mistral_wake_interrupt);
-		if (ret != 0) {
-			gpio_free(OMAP_MPUIO(2));
-			printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
-				ret);
-		} else
-			enable_irq_wake(irq);
-	} else
-		printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
-
-	/* LCD:  backlight, and power; power controls other devices on the
-	 * board, like the touchscreen, EEPROM, and wakeup (!) switch.
-	 */
-	omap_cfg_reg(PWL);
-	if (gpio_request(2, "lcd_pwr") == 0)
-		gpio_direction_output(2, 1);
-
-	/*
-	 * GPIO based LEDs
-	 */
-	omap_cfg_reg(P18_1610_GPIO3);
-	omap_cfg_reg(MPUIO4);
-
-	i2c_register_board_info(1, mistral_i2c_board_info,
-			ARRAY_SIZE(mistral_i2c_board_info));
-
-	platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
-}
-#else
-static void __init osk_mistral_init(void) { }
-#endif
-
 #define EMIFS_CS3_VAL	(0x88013141)
 
 static void __init osk_init(void)
@@ -576,7 +346,7 @@ static void __init osk_init(void)
 	u32 l;
 
 	osk_init_smc91x();
-	osk_init_cf();
+	osk_init_cf(2); /* CS2 */
 
 	/* Workaround for wrong CS3 (NOR flash) timing
 	 * There are some U-Boot versions out there which configure
@@ -611,18 +381,12 @@ static void __init osk_init(void)
 	osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1));
 	omap_register_i2c_bus(1, 400, osk_i2c_board_info,
 			      ARRAY_SIZE(osk_i2c_board_info));
-	osk_mistral_init();
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-	omapfb_set_lcd_config(&osk_lcd_config);
-#endif
-
 }
 
 MACHINE_START(OMAP_OSK, "TI-OSK")
 	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
 	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
+	.map_io		= omap1_map_io,
 	.init_early	= omap1_init_early,
 	.init_irq	= omap1_init_irq,
 	.handle_irq	= omap1_handle_irq,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index ce6f0fcd9d12..f79c497f04d5 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -25,21 +25,19 @@
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 #include <linux/omapfb.h>
+#include <linux/omap-dma.h>
+#include <linux/platform_data/keypad-omap.h>
 #include <linux/platform_data/omap1_bl.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include "tc.h"
 #include "flash.h"
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <linux/omap-dma.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
+#include "mux.h"
+#include "hardware.h"
+#include "usb.h"
 #include "mmc.h"
 #include "common.h"
 
@@ -258,7 +256,7 @@ static void __init omap_palmte_init(void)
 
 MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
+	.map_io		= omap1_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
 	.handle_irq	= omap1_handle_irq,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
deleted file mode 100644
index 8a08311c4e05..000000000000
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ /dev/null
@@ -1,287 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-palmtt.c
- *
- * Modified from board-palmtt2.c
- *
- * Modified and amended for Palm Tungsten|T
- * by Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/notifier.h>
-#include <linux/clk.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/leds.h>
-#include <linux/omapfb.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/platform_data/omap1_bl.h>
-#include <linux/platform_data/leds-omap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "flash.h"
-#include <mach/mux.h>
-#include <linux/omap-dma.h>
-#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
-#include "common.h"
-
-#define PALMTT_USBDETECT_GPIO	0
-#define PALMTT_CABLE_GPIO	1
-#define PALMTT_LED_GPIO		3
-#define PALMTT_PENIRQ_GPIO	6
-#define PALMTT_MMC_WP_GPIO	8
-#define PALMTT_HDQ_GPIO		11
-
-static const unsigned int palmtt_keymap[] = {
-	KEY(0, 0, KEY_ESC),
-	KEY(1, 0, KEY_SPACE),
-	KEY(2, 0, KEY_LEFTCTRL),
-	KEY(3, 0, KEY_TAB),
-	KEY(4, 0, KEY_ENTER),
-	KEY(0, 1, KEY_LEFT),
-	KEY(1, 1, KEY_DOWN),
-	KEY(2, 1, KEY_UP),
-	KEY(3, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_SLEEP),
-	KEY(4, 2, KEY_Y),
-};
-
-static struct mtd_partition palmtt_partitions[] = {
-	{
-		.name		= "write8k",
-		.offset		= 0,
-		.size		= SZ_8K,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "PalmOS-BootLoader(ro)",
-		.offset		= SZ_8K,
-		.size		= 7 * SZ_8K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * SZ_8K,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "PalmOS-FS(ro)",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 7 * SZ_1M + 4 * SZ_64K - 16 * SZ_8K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "u-boot(rez)",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= 0
-	},
-	{
-		.name		= "empty",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data palmtt_flash_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= palmtt_partitions,
-	.nr_parts	= ARRAY_SIZE(palmtt_partitions),
-};
-
-static struct resource palmtt_flash_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_8M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device palmtt_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &palmtt_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &palmtt_flash_resource,
-};
-
-static struct resource palmtt_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data palmtt_keymap_data = {
-	.keymap		= palmtt_keymap,
-	.keymap_size	= ARRAY_SIZE(palmtt_keymap),
-};
-
-static struct omap_kp_platform_data palmtt_kp_data = {
-	.rows	= 6,
-	.cols	= 3,
-	.keymap_data = &palmtt_keymap_data,
-};
-
-static struct platform_device palmtt_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &palmtt_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(palmtt_kp_resources),
-	.resource	= palmtt_kp_resources,
-};
-
-static struct platform_device palmtt_lcd_device = {
-	.name		= "lcd_palmtt",
-	.id		= -1,
-};
-
-static struct platform_device palmtt_spi_device = {
-	.name		= "spi_palmtt",
-	.id		= -1,
-};
-
-static struct omap_backlight_config palmtt_backlight_config = {
-	.default_intensity	= 0xa0,
-};
-
-static struct platform_device palmtt_backlight_device = {
-	.name		= "omap-bl",
-	.id		= -1,
-	.dev		= {
-		.platform_data= &palmtt_backlight_config,
-	},
-};
-
-static struct omap_led_config palmtt_led_config[] = {
-	{
-		.cdev	= {
-			.name	= "palmtt:led0",
-		},
-		.gpio	= PALMTT_LED_GPIO,
-	},
-};
-
-static struct omap_led_platform_data palmtt_led_data = {
-	.nr_leds	= ARRAY_SIZE(palmtt_led_config),
-	.leds		= palmtt_led_config,
-};
-
-static struct platform_device palmtt_led_device = {
-	.name	= "omap-led",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmtt_led_data,
-	},
-};
-
-static struct platform_device *palmtt_devices[] __initdata = {
-	&palmtt_flash_device,
-	&palmtt_kp_device,
-	&palmtt_lcd_device,
-	&palmtt_spi_device,
-	&palmtt_backlight_device,
-	&palmtt_led_device,
-};
-
-static int palmtt_get_pendown_state(void)
-{
-	return !gpio_get_value(6);
-}
-
-static const struct ads7846_platform_data palmtt_ts_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.get_pendown_state	= palmtt_get_pendown_state,
-};
-
-static struct spi_board_info __initdata palmtt_boardinfo[] = {
-	{
-		/* MicroWire (bus 2) CS0 has an ads7846e */
-		.modalias	= "ads7846",
-		.platform_data	= &palmtt_ts_info,
-		.max_speed_hz	= 120000	/* max sample rate at 3V */
-					* 26	/* command + data + overhead */,
-		.bus_num	= 2,
-		.chip_select	= 0,
-	}
-};
-
-static struct omap_usb_config palmtt_usb_config __initdata = {
-	.register_dev	= 1,
-	.hmc_mode	= 0,
-	.pins[0]	= 2,
-};
-
-static const struct omap_lcd_config palmtt_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-
-static void __init omap_mpu_wdt_mode(int mode) {
-	if (mode)
-		omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
-	else {
-		omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
-		omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
-	}
-}
-
-static void __init omap_palmtt_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-
-	omap_mpu_wdt_mode(0);
-
-	platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
-
-	palmtt_boardinfo[0].irq = gpio_to_irq(6);
-	spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
-	omap_serial_init();
-	omap1_usb_init(&palmtt_usb_config);
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	omapfb_set_lcd_config(&palmtt_lcd_config);
-}
-
-MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
-	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_palmtt_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
deleted file mode 100644
index 034e5bc6a029..000000000000
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ /dev/null
@@ -1,302 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-palmz71.c
- *
- * Modified from board-generic.c
- *
- * Support for the Palm Zire71 PDA.
- *
- * Original version : Laurent Gonzalez
- *
- * Modified for zire71 : Marek Vasut
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/notifier.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/omapfb.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/platform_data/omap1_bl.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "flash.h"
-#include <mach/mux.h>
-#include <linux/omap-dma.h>
-#include <mach/tc.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
-#include "common.h"
-
-#define PALMZ71_USBDETECT_GPIO	0
-#define PALMZ71_PENIRQ_GPIO	6
-#define PALMZ71_MMC_WP_GPIO	8
-#define PALMZ71_HDQ_GPIO 	11
-
-#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
-#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
-#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
-#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
-
-static const unsigned int palmz71_keymap[] = {
-	KEY(0, 0, KEY_F1),
-	KEY(1, 0, KEY_F2),
-	KEY(2, 0, KEY_F3),
-	KEY(3, 0, KEY_F4),
-	KEY(4, 0, KEY_POWER),
-	KEY(0, 1, KEY_LEFT),
-	KEY(1, 1, KEY_DOWN),
-	KEY(2, 1, KEY_UP),
-	KEY(3, 1, KEY_RIGHT),
-	KEY(4, 1, KEY_ENTER),
-	KEY(0, 2, KEY_CAMERA),
-};
-
-static const struct matrix_keymap_data palmz71_keymap_data = {
-	.keymap		= palmz71_keymap,
-	.keymap_size	= ARRAY_SIZE(palmz71_keymap),
-};
-
-static struct omap_kp_platform_data palmz71_kp_data = {
-	.rows	= 8,
-	.cols	= 8,
-	.keymap_data	= &palmz71_keymap_data,
-	.rep	= true,
-	.delay	= 80,
-};
-
-static struct resource palmz71_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device palmz71_kp_device = {
-	.name	= "omap-keypad",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmz71_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(palmz71_kp_resources),
-	.resource	= palmz71_kp_resources,
-};
-
-static struct mtd_partition palmz71_rom_partitions[] = {
-	/* PalmOS "Small ROM", contains the bootloader and the debugger */
-	{
-		.name		= "smallrom",
-		.offset		= 0,
-		.size		= 0xa000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	/* PalmOS "Big ROM", a filesystem with all the OS code and data */
-	{
-		.name	= "bigrom",
-		.offset	= SZ_128K,
-		/*
-		 * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
-		 * 0x7b0000 bytes in the English-only ("enUS") version.
-		 */
-		.size		= 0x7b0000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data palmz71_rom_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= palmz71_rom_partitions,
-	.nr_parts	= ARRAY_SIZE(palmz71_rom_partitions),
-};
-
-static struct resource palmz71_rom_resource = {
-	.start	= OMAP_CS0_PHYS,
-	.end	= OMAP_CS0_PHYS + SZ_8M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device palmz71_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.dev = {
-		.platform_data = &palmz71_rom_data,
-	},
-	.num_resources	= 1,
-	.resource	= &palmz71_rom_resource,
-};
-
-static struct platform_device palmz71_lcd_device = {
-	.name	= "lcd_palmz71",
-	.id	= -1,
-};
-
-static struct platform_device palmz71_spi_device = {
-	.name	= "spi_palmz71",
-	.id	= -1,
-};
-
-static struct omap_backlight_config palmz71_backlight_config = {
-	.default_intensity	= 0xa0,
-};
-
-static struct platform_device palmz71_backlight_device = {
-	.name	= "omap-bl",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmz71_backlight_config,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&palmz71_rom_device,
-	&palmz71_kp_device,
-	&palmz71_lcd_device,
-	&palmz71_spi_device,
-	&palmz71_backlight_device,
-};
-
-static int
-palmz71_get_pendown_state(void)
-{
-	return !gpio_get_value(PALMZ71_PENIRQ_GPIO);
-}
-
-static const struct ads7846_platform_data palmz71_ts_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.get_pendown_state	= palmz71_get_pendown_state,
-};
-
-static struct spi_board_info __initdata palmz71_boardinfo[] = { {
-	/* MicroWire (bus 2) CS0 has an ads7846e */
-	.modalias	= "ads7846",
-	.platform_data	= &palmz71_ts_info,
-	.max_speed_hz	= 120000	/* max sample rate at 3V */
-				* 26	/* command + data + overhead */,
-	.bus_num	= 2,
-	.chip_select	= 0,
-} };
-
-static struct omap_usb_config palmz71_usb_config __initdata = {
-	.register_dev	= 1,	/* Mini-B only receptacle */
-	.hmc_mode	= 0,
-	.pins[0]	= 2,
-};
-
-static const struct omap_lcd_config palmz71_lcd_config __initconst = {
-	.ctrl_name = "internal",
-};
-
-static irqreturn_t
-palmz71_powercable(int irq, void *dev_id)
-{
-	if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) {
-		printk(KERN_INFO "PM: Power cable connected\n");
-		irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
-				 IRQ_TYPE_EDGE_FALLING);
-	} else {
-		printk(KERN_INFO "PM: Power cable disconnected\n");
-		irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
-				 IRQ_TYPE_EDGE_RISING);
-	}
-	return IRQ_HANDLED;
-}
-
-static void __init
-omap_mpu_wdt_mode(int mode)
-{
-	if (mode)
-		omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
-	else {
-		omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
-		omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
-	}
-}
-
-static void __init
-palmz71_gpio_setup(int early)
-{
-	if (early) {
-		/* Only set GPIO1 so we have a working serial */
-		gpio_direction_output(1, 1);
-	} else {
-		/* Set MMC/SD host WP pin as input */
-		if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) {
-			printk(KERN_ERR "Could not reserve WP GPIO!\n");
-			return;
-		}
-		gpio_direction_input(PALMZ71_MMC_WP_GPIO);
-
-		/* Monitor the Power-cable-connected signal */
-		if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) {
-			printk(KERN_ERR
-				"Could not reserve cable signal GPIO!\n");
-			return;
-		}
-		gpio_direction_input(PALMZ71_USBDETECT_GPIO);
-		if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
-				palmz71_powercable, 0, "palmz71-cable", NULL))
-			printk(KERN_ERR
-					"IRQ request for power cable failed!\n");
-		palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL);
-	}
-}
-
-static void __init
-omap_palmz71_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-
-	palmz71_gpio_setup(1);
-	omap_mpu_wdt_mode(0);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO);
-	spi_register_board_info(palmz71_boardinfo,
-				ARRAY_SIZE(palmz71_boardinfo));
-	omap1_usb_init(&palmz71_usb_config);
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-	palmz71_gpio_setup(0);
-
-	omapfb_set_lcd_config(&palmz71_lcd_config);
-}
-
-MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
-	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_palmz71_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
deleted file mode 100644
index 1aeeb7337d29..000000000000
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ /dev/null
@@ -1,328 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-perseus2.c
- *
- * Modified from board-generic.c
- *
- * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
- * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/tc.h>
-#include <mach/mux.h>
-#include "flash.h"
-
-#include <mach/hardware.h>
-
-#include "iomap.h"
-#include "common.h"
-#include "fpga.h"
-
-static const unsigned int p2_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_LEFT),
-	KEY(3, 0, KEY_DOWN),
-	KEY(4, 0, KEY_ENTER),
-	KEY(0, 1, KEY_F10),
-	KEY(1, 1, KEY_SEND),
-	KEY(2, 1, KEY_END),
-	KEY(3, 1, KEY_VOLUMEDOWN),
-	KEY(4, 1, KEY_VOLUMEUP),
-	KEY(5, 1, KEY_RECORD),
-	KEY(0, 2, KEY_F9),
-	KEY(1, 2, KEY_3),
-	KEY(2, 2, KEY_6),
-	KEY(3, 2, KEY_9),
-	KEY(4, 2, KEY_KPDOT),
-	KEY(0, 3, KEY_BACK),
-	KEY(1, 3, KEY_2),
-	KEY(2, 3, KEY_5),
-	KEY(3, 3, KEY_8),
-	KEY(4, 3, KEY_0),
-	KEY(5, 3, KEY_KPSLASH),
-	KEY(0, 4, KEY_HOME),
-	KEY(1, 4, KEY_1),
-	KEY(2, 4, KEY_4),
-	KEY(3, 4, KEY_7),
-	KEY(4, 4, KEY_KPASTERISK),
-	KEY(5, 4, KEY_POWER),
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
-		.end	= H2P2_DBG_FPGA_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_7XX_MPU_EXT_NIRQ,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct mtd_partition nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* rest of flash is a file system */
-	{
-	      .name		= "rootfs",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	},
-};
-
-static struct physmap_flash_data nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= nor_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_partitions),
-};
-
-static struct resource nor_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nor_resource,
-};
-
-#define P2_NAND_RB_GPIO_PIN	62
-
-static int nand_dev_ready(struct nand_chip *chip)
-{
-	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
-}
-
-static struct platform_nand_data nand_data = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= omap1_nand_cmd_ctl,
-		.dev_ready	= nand_dev_ready,
-	},
-};
-
-static struct resource nand_resource = {
-	.start		= OMAP_CS3_PHYS,
-	.end		= OMAP_CS3_PHYS + SZ_4K - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nand_resource,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource kp_resources[] = {
-	[0] = {
-		.start	= INT_7XX_MPUIO_KEYPAD,
-		.end	= INT_7XX_MPUIO_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data p2_keymap_data = {
-	.keymap		= p2_keymap,
-	.keymap_size	= ARRAY_SIZE(p2_keymap),
-};
-
-static struct omap_kp_platform_data kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &p2_keymap_data,
-	.delay		= 4,
-	.dbounce	= true,
-};
-
-static struct platform_device kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(kp_resources),
-	.resource	= kp_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&nor_device,
-	&nand_device,
-	&smc91x_device,
-	&kp_device,
-};
-
-static const struct omap_lcd_config perseus2_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-
-static void __init perseus2_init_smc91x(void)
-{
-	__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-	__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
-		   H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-}
-
-static void __init omap_perseus2_init(void)
-{
-	/* Early, board-dependent init */
-
-	/*
-	 * Hold GSM Reset until needed
-	 */
-	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
-
-	/*
-	 * UARTs -> done automagically by 8250 driver
-	 */
-
-	/*
-	 * CSx timings, GPIO Mux ... setup
-	 */
-
-	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
-
-	/*
-	 * Ethernet support through the debug board
-	 * CS1 timings setup
-	 */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
-
-	/*
-	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
-	 * It is used as the Ethernet controller interrupt
-	 */
-	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
-				OMAP7XX_IO_CONF_9);
-
-	perseus2_init_smc91x();
-
-	BUG_ON(gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
-	gpio_direction_input(P2_NAND_RB_GPIO_PIN);
-
-	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
-	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(E2_7XX_KBR0);
-	omap_cfg_reg(J7_7XX_KBR1);
-	omap_cfg_reg(E1_7XX_KBR2);
-	omap_cfg_reg(F3_7XX_KBR3);
-	omap_cfg_reg(D2_7XX_KBR4);
-	omap_cfg_reg(C2_7XX_KBC0);
-	omap_cfg_reg(D3_7XX_KBC1);
-	omap_cfg_reg(E4_7XX_KBC2);
-	omap_cfg_reg(F4_7XX_KBC3);
-	omap_cfg_reg(E3_7XX_KBC4);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	omapfb_set_lcd_config(&perseus2_lcd_config);
-}
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc omap_perseus2_io_desc[] __initdata = {
-	{
-		.virtual	= H2P2_DBG_FPGA_BASE,
-		.pfn		= __phys_to_pfn(H2P2_DBG_FPGA_START),
-		.length		= H2P2_DBG_FPGA_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init omap_perseus2_map_io(void)
-{
-	omap7xx_map_io();
-	iotable_init(omap_perseus2_io_desc,
-		     ARRAY_SIZE(omap_perseus2_io_desc));
-}
-
-MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
-	/* Maintainer: Kevin Hilman <kjh@hilman.org> */
-	.atag_offset	= 0x100,
-	.map_io		= omap_perseus2_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_perseus2_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 6192b1da75cb..f1c160924dfe 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -12,9 +12,8 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include "board-sx1.h"
-
 #include "mmc.h"
 
 #if IS_ENABLED(CONFIG_MMC_OMAP)
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index bb9ec345e204..0c0cdd5e77c7 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -26,20 +26,18 @@
 #include <linux/export.h>
 #include <linux/omapfb.h>
 #include <linux/platform_data/keypad-omap.h>
+#include <linux/omap-dma.h>
+#include "tc.h"
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include "flash.h"
-#include <mach/mux.h>
-#include <linux/omap-dma.h>
-#include <mach/tc.h>
+#include "mux.h"
 #include "board-sx1.h"
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
+#include "hardware.h"
+#include "usb.h"
 #include "common.h"
 
 /* Write to I2C device */
@@ -337,7 +335,7 @@ static void __init omap_sx1_init(void)
 
 MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
+	.map_io		= omap1_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
 	.handle_irq	= omap1_handle_irq,
diff --git a/arch/arm/mach-omap1/board-sx1.h b/arch/arm/mach-omap1/board-sx1.h
index 355adbdaae33..fafe54a2e444 100644
--- a/arch/arm/mach-omap1/board-sx1.h
+++ b/arch/arm/mach-omap1/board-sx1.h
@@ -1,15 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Siemens SX1 board definitions
  *
  * Copyright: Vovan888 at gmail com
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  */
 
 #ifndef __ASM_ARCH_SX1_I2C_CHIPS_H
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 9d4a0ab50a46..83381e23fab9 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -16,11 +16,13 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/spinlock.h>
 
 #include <asm/mach-types.h>
 
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "soc.h"
 #include "iomap.h"
 #include "clock.h"
@@ -28,33 +30,37 @@
 #include "sram.h"
 
 __u32 arm_idlect1_mask;
-struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
+/* provide direct internal access (not via clk API) to some clocks */
+struct omap1_clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
 
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-static DEFINE_SPINLOCK(clockfw_lock);
+/* protect registeres shared among clk_enable/disable() and clk_set_rate() operations */
+static DEFINE_SPINLOCK(arm_ckctl_lock);
+static DEFINE_SPINLOCK(arm_idlect2_lock);
+static DEFINE_SPINLOCK(mod_conf_ctrl_0_lock);
+static DEFINE_SPINLOCK(mod_conf_ctrl_1_lock);
+static DEFINE_SPINLOCK(swd_clk_div_ctrl_sel_lock);
 
 /*
  * Omap1 specific clock functions
  */
 
-unsigned long omap1_uart_recalc(struct clk *clk)
+unsigned long omap1_uart_recalc(struct omap1_clk *clk, unsigned long p_rate)
 {
 	unsigned int val = __raw_readl(clk->enable_reg);
-	return val & clk->enable_bit ? 48000000 : 12000000;
+	return val & 1 << clk->enable_bit ? 48000000 : 12000000;
 }
 
-unsigned long omap1_sossi_recalc(struct clk *clk)
+unsigned long omap1_sossi_recalc(struct omap1_clk *clk, unsigned long p_rate)
 {
 	u32 div = omap_readl(MOD_CONF_CTRL_1);
 
 	div = (div >> 17) & 0x7;
 	div++;
 
-	return clk->parent->rate / div;
+	return p_rate / div;
 }
 
-static void omap1_clk_allow_idle(struct clk *clk)
+static void omap1_clk_allow_idle(struct omap1_clk *clk)
 {
 	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
 
@@ -65,7 +71,7 @@ static void omap1_clk_allow_idle(struct clk *clk)
 		arm_idlect1_mask |= 1 << iclk->idlect_shift;
 }
 
-static void omap1_clk_deny_idle(struct clk *clk)
+static void omap1_clk_deny_idle(struct omap1_clk *clk)
 {
 	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
 
@@ -129,7 +135,7 @@ static __u16 verify_ckctl_value(__u16 newval)
 	return newval;
 }
 
-static int calc_dsor_exp(struct clk *clk, unsigned long rate)
+static int calc_dsor_exp(unsigned long rate, unsigned long realrate)
 {
 	/* Note: If target frequency is too low, this function will return 4,
 	 * which is invalid value. Caller must check for this value and act
@@ -142,15 +148,11 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate)
 	 * DSP_CK >= TC_CK
 	 * DSPMMU_CK >= TC_CK
 	 */
-	unsigned long realrate;
-	struct clk * parent;
 	unsigned  dsor_exp;
 
-	parent = clk->parent;
-	if (unlikely(parent == NULL))
+	if (unlikely(realrate == 0))
 		return -EIO;
 
-	realrate = parent->rate;
 	for (dsor_exp=0; dsor_exp<4; dsor_exp++) {
 		if (realrate <= rate)
 			break;
@@ -161,16 +163,50 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate)
 	return dsor_exp;
 }
 
-unsigned long omap1_ckctl_recalc(struct clk *clk)
+unsigned long omap1_ckctl_recalc(struct omap1_clk *clk, unsigned long p_rate)
 {
 	/* Calculate divisor encoded as 2-bit exponent */
 	int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
 
-	return clk->parent->rate / dsor;
+	/* update locally maintained rate, required by arm_ck for omap1_show_rates() */
+	clk->rate = p_rate / dsor;
+	return clk->rate;
+}
+
+static int omap1_clk_is_enabled(struct clk_hw *hw)
+{
+	struct omap1_clk *clk = to_omap1_clk(hw);
+	bool api_ck_was_enabled = true;
+	__u32 regval32;
+	int ret;
+
+	if (!clk->ops)	/* no gate -- always enabled */
+		return 1;
+
+	if (clk->ops == &clkops_dspck) {
+		api_ck_was_enabled = omap1_clk_is_enabled(&api_ck_p->hw);
+		if (!api_ck_was_enabled)
+			if (api_ck_p->ops->enable(api_ck_p) < 0)
+				return 0;
+	}
+
+	if (clk->flags & ENABLE_REG_32BIT)
+		regval32 = __raw_readl(clk->enable_reg);
+	else
+		regval32 = __raw_readw(clk->enable_reg);
+
+	ret = regval32 & (1 << clk->enable_bit);
+
+	if (!api_ck_was_enabled)
+		api_ck_p->ops->disable(api_ck_p);
+
+	return ret;
 }
 
-unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
+
+unsigned long omap1_ckctl_recalc_dsp_domain(struct omap1_clk *clk, unsigned long p_rate)
 {
+	bool api_ck_was_enabled;
 	int dsor;
 
 	/* Calculate divisor encoded as 2-bit exponent
@@ -180,15 +216,18 @@ unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
 	 * Note that DSP_CKCTL virt addr = phys addr, so
 	 * we must use __raw_readw() instead of omap_readw().
 	 */
-	omap1_clk_enable(api_ck_p);
+	api_ck_was_enabled = omap1_clk_is_enabled(&api_ck_p->hw);
+	if (!api_ck_was_enabled)
+		api_ck_p->ops->enable(api_ck_p);
 	dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
-	omap1_clk_disable(api_ck_p);
+	if (!api_ck_was_enabled)
+		api_ck_p->ops->disable(api_ck_p);
 
-	return clk->parent->rate / dsor;
+	return p_rate / dsor;
 }
 
 /* MPU virtual clock functions */
-int omap1_select_table_rate(struct clk *clk, unsigned long rate)
+int omap1_select_table_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate)
 {
 	/* Find the highest supported frequency <= rate and switch to it */
 	struct mpu_rate * ptr;
@@ -223,12 +262,12 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
+int omap1_clk_set_rate_dsp_domain(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate)
 {
 	int dsor_exp;
 	u16 regval;
 
-	dsor_exp = calc_dsor_exp(clk, rate);
+	dsor_exp = calc_dsor_exp(rate, p_rate);
 	if (dsor_exp > 3)
 		dsor_exp = -EINVAL;
 	if (dsor_exp < 0)
@@ -238,42 +277,51 @@ int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
 	regval &= ~(3 << clk->rate_offset);
 	regval |= dsor_exp << clk->rate_offset;
 	__raw_writew(regval, DSP_CKCTL);
-	clk->rate = clk->parent->rate / (1 << dsor_exp);
+	clk->rate = p_rate / (1 << dsor_exp);
 
 	return 0;
 }
 
-long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+long omap1_clk_round_rate_ckctl_arm(struct omap1_clk *clk, unsigned long rate,
+				    unsigned long *p_rate)
 {
-	int dsor_exp = calc_dsor_exp(clk, rate);
+	int dsor_exp = calc_dsor_exp(rate, *p_rate);
+
 	if (dsor_exp < 0)
 		return dsor_exp;
 	if (dsor_exp > 3)
 		dsor_exp = 3;
-	return clk->parent->rate / (1 << dsor_exp);
+	return *p_rate / (1 << dsor_exp);
 }
 
-int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+int omap1_clk_set_rate_ckctl_arm(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate)
 {
+	unsigned long flags;
 	int dsor_exp;
 	u16 regval;
 
-	dsor_exp = calc_dsor_exp(clk, rate);
+	dsor_exp = calc_dsor_exp(rate, p_rate);
 	if (dsor_exp > 3)
 		dsor_exp = -EINVAL;
 	if (dsor_exp < 0)
 		return dsor_exp;
 
+	/* protect ARM_CKCTL register from concurrent access via clk_enable/disable() */
+	spin_lock_irqsave(&arm_ckctl_lock, flags);
+
 	regval = omap_readw(ARM_CKCTL);
 	regval &= ~(3 << clk->rate_offset);
 	regval |= dsor_exp << clk->rate_offset;
 	regval = verify_ckctl_value(regval);
 	omap_writew(regval, ARM_CKCTL);
-	clk->rate = clk->parent->rate / (1 << dsor_exp);
+	clk->rate = p_rate / (1 << dsor_exp);
+
+	spin_unlock_irqrestore(&arm_ckctl_lock, flags);
+
 	return 0;
 }
 
-long omap1_round_to_table_rate(struct clk *clk, unsigned long rate)
+long omap1_round_to_table_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate)
 {
 	/* Find the highest supported frequency <= rate */
 	struct mpu_rate * ptr;
@@ -324,26 +372,40 @@ static unsigned calc_ext_dsor(unsigned long rate)
 }
 
 /* XXX Only needed on 1510 */
-int omap1_set_uart_rate(struct clk *clk, unsigned long rate)
+long omap1_round_uart_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate)
+{
+	return rate > 24000000 ? 48000000 : 12000000;
+}
+
+int omap1_set_uart_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate)
 {
+	unsigned long flags;
 	unsigned int val;
 
-	val = __raw_readl(clk->enable_reg);
 	if (rate == 12000000)
-		val &= ~(1 << clk->enable_bit);
+		val = 0;
 	else if (rate == 48000000)
-		val |= (1 << clk->enable_bit);
+		val = 1 << clk->enable_bit;
 	else
 		return -EINVAL;
+
+	/* protect MOD_CONF_CTRL_0 register from concurrent access via clk_enable/disable() */
+	spin_lock_irqsave(&mod_conf_ctrl_0_lock, flags);
+
+	val |= __raw_readl(clk->enable_reg) & ~(1 << clk->enable_bit);
 	__raw_writel(val, clk->enable_reg);
+
+	spin_unlock_irqrestore(&mod_conf_ctrl_0_lock, flags);
+
 	clk->rate = rate;
 
 	return 0;
 }
 
 /* External clock (MCLK & BCLK) functions */
-int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate)
+int omap1_set_ext_clk_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate)
 {
+	unsigned long flags;
 	unsigned dsor;
 	__u16 ratio_bits;
 
@@ -354,25 +416,53 @@ int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate)
 	else
 		ratio_bits = (dsor - 2) << 2;
 
+	/* protect SWD_CLK_DIV_CTRL_SEL register from concurrent access via clk_enable/disable() */
+	spin_lock_irqsave(&swd_clk_div_ctrl_sel_lock, flags);
+
 	ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd;
 	__raw_writew(ratio_bits, clk->enable_reg);
 
+	spin_unlock_irqrestore(&swd_clk_div_ctrl_sel_lock, flags);
+
 	return 0;
 }
 
-int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
+static int calc_div_sossi(unsigned long rate, unsigned long p_rate)
 {
-	u32 l;
 	int div;
-	unsigned long p_rate;
 
-	p_rate = clk->parent->rate;
 	/* Round towards slower frequency */
 	div = (p_rate + rate - 1) / rate;
-	div--;
+
+	return --div;
+}
+
+long omap1_round_sossi_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate)
+{
+	int div;
+
+	div = calc_div_sossi(rate, *p_rate);
+	if (div < 0)
+		div = 0;
+	else if (div > 7)
+		div = 7;
+
+	return *p_rate / (div + 1);
+}
+
+int omap1_set_sossi_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate)
+{
+	unsigned long flags;
+	u32 l;
+	int div;
+
+	div = calc_div_sossi(rate, p_rate);
 	if (div < 0 || div > 7)
 		return -EINVAL;
 
+	/* protect MOD_CONF_CTRL_1 register from concurrent access via clk_enable/disable() */
+	spin_lock_irqsave(&mod_conf_ctrl_1_lock, flags);
+
 	l = omap_readl(MOD_CONF_CTRL_1);
 	l &= ~(7 << 17);
 	l |= div << 17;
@@ -380,15 +470,17 @@ int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
 
 	clk->rate = p_rate / (div + 1);
 
+	spin_unlock_irqrestore(&mod_conf_ctrl_1_lock, flags);
+
 	return 0;
 }
 
-long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate)
+long omap1_round_ext_clk_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate)
 {
 	return 96000000 / calc_ext_dsor(rate);
 }
 
-void omap1_init_ext_clk(struct clk *clk)
+int omap1_init_ext_clk(struct omap1_clk *clk)
 {
 	unsigned dsor;
 	__u16 ratio_bits;
@@ -404,59 +496,59 @@ void omap1_init_ext_clk(struct clk *clk)
 		dsor = ratio_bits + 2;
 
 	clk-> rate = 96000000 / dsor;
+
+	return 0;
 }
 
-int omap1_clk_enable(struct clk *clk)
+static int omap1_clk_enable(struct clk_hw *hw)
 {
+	struct omap1_clk *clk = to_omap1_clk(hw), *parent = to_omap1_clk(clk_hw_get_parent(hw));
 	int ret = 0;
 
-	if (clk->usecount++ == 0) {
-		if (clk->parent) {
-			ret = omap1_clk_enable(clk->parent);
-			if (ret)
-				goto err;
-
-			if (clk->flags & CLOCK_NO_IDLE_PARENT)
-				omap1_clk_deny_idle(clk->parent);
-		}
+	if (parent && clk->flags & CLOCK_NO_IDLE_PARENT)
+		omap1_clk_deny_idle(parent);
 
+	if (clk->ops && !(WARN_ON(!clk->ops->enable)))
 		ret = clk->ops->enable(clk);
-		if (ret) {
-			if (clk->parent)
-				omap1_clk_disable(clk->parent);
-			goto err;
-		}
-	}
-	return ret;
 
-err:
-	clk->usecount--;
 	return ret;
 }
 
-void omap1_clk_disable(struct clk *clk)
+static void omap1_clk_disable(struct clk_hw *hw)
 {
-	if (clk->usecount > 0 && !(--clk->usecount)) {
+	struct omap1_clk *clk = to_omap1_clk(hw), *parent = to_omap1_clk(clk_hw_get_parent(hw));
+
+	if (clk->ops && !(WARN_ON(!clk->ops->disable)))
 		clk->ops->disable(clk);
-		if (likely(clk->parent)) {
-			omap1_clk_disable(clk->parent);
-			if (clk->flags & CLOCK_NO_IDLE_PARENT)
-				omap1_clk_allow_idle(clk->parent);
-		}
-	}
+
+	if (likely(parent) && clk->flags & CLOCK_NO_IDLE_PARENT)
+		omap1_clk_allow_idle(parent);
 }
 
-static int omap1_clk_enable_generic(struct clk *clk)
+static int omap1_clk_enable_generic(struct omap1_clk *clk)
 {
+	unsigned long flags;
 	__u16 regval16;
 	__u32 regval32;
 
 	if (unlikely(clk->enable_reg == NULL)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
-		       clk->name);
+		       clk_hw_get_name(&clk->hw));
 		return -EINVAL;
 	}
 
+	/* protect clk->enable_reg from concurrent access via clk_set_rate() */
+	if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_CKCTL))
+		spin_lock_irqsave(&arm_ckctl_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_IDLECT2))
+		spin_lock_irqsave(&arm_idlect2_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0))
+		spin_lock_irqsave(&mod_conf_ctrl_0_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1))
+		spin_lock_irqsave(&mod_conf_ctrl_1_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL))
+		spin_lock_irqsave(&swd_clk_div_ctrl_sel_lock, flags);
+
 	if (clk->flags & ENABLE_REG_32BIT) {
 		regval32 = __raw_readl(clk->enable_reg);
 		regval32 |= (1 << clk->enable_bit);
@@ -467,17 +559,41 @@ static int omap1_clk_enable_generic(struct clk *clk)
 		__raw_writew(regval16, clk->enable_reg);
 	}
 
+	if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_CKCTL))
+		spin_unlock_irqrestore(&arm_ckctl_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_IDLECT2))
+		spin_unlock_irqrestore(&arm_idlect2_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0))
+		spin_unlock_irqrestore(&mod_conf_ctrl_0_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1))
+		spin_unlock_irqrestore(&mod_conf_ctrl_1_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL))
+		spin_unlock_irqrestore(&swd_clk_div_ctrl_sel_lock, flags);
+
 	return 0;
 }
 
-static void omap1_clk_disable_generic(struct clk *clk)
+static void omap1_clk_disable_generic(struct omap1_clk *clk)
 {
+	unsigned long flags;
 	__u16 regval16;
 	__u32 regval32;
 
 	if (clk->enable_reg == NULL)
 		return;
 
+	/* protect clk->enable_reg from concurrent access via clk_set_rate() */
+	if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_CKCTL))
+		spin_lock_irqsave(&arm_ckctl_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_IDLECT2))
+		spin_lock_irqsave(&arm_idlect2_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0))
+		spin_lock_irqsave(&mod_conf_ctrl_0_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1))
+		spin_lock_irqsave(&mod_conf_ctrl_1_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL))
+		spin_lock_irqsave(&swd_clk_div_ctrl_sel_lock, flags);
+
 	if (clk->flags & ENABLE_REG_32BIT) {
 		regval32 = __raw_readl(clk->enable_reg);
 		regval32 &= ~(1 << clk->enable_bit);
@@ -487,6 +603,17 @@ static void omap1_clk_disable_generic(struct clk *clk)
 		regval16 &= ~(1 << clk->enable_bit);
 		__raw_writew(regval16, clk->enable_reg);
 	}
+
+	if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_CKCTL))
+		spin_unlock_irqrestore(&arm_ckctl_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(ARM_IDLECT2))
+		spin_unlock_irqrestore(&arm_idlect2_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0))
+		spin_unlock_irqrestore(&mod_conf_ctrl_0_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1))
+		spin_unlock_irqrestore(&mod_conf_ctrl_1_lock, flags);
+	else if (clk->enable_reg == OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL))
+		spin_unlock_irqrestore(&swd_clk_div_ctrl_sel_lock, flags);
 }
 
 const struct clkops clkops_generic = {
@@ -494,25 +621,38 @@ const struct clkops clkops_generic = {
 	.disable	= omap1_clk_disable_generic,
 };
 
-static int omap1_clk_enable_dsp_domain(struct clk *clk)
+static int omap1_clk_enable_dsp_domain(struct omap1_clk *clk)
 {
-	int retval;
+	bool api_ck_was_enabled;
+	int retval = 0;
+
+	api_ck_was_enabled = omap1_clk_is_enabled(&api_ck_p->hw);
+	if (!api_ck_was_enabled)
+		retval = api_ck_p->ops->enable(api_ck_p);
 
-	retval = omap1_clk_enable(api_ck_p);
 	if (!retval) {
 		retval = omap1_clk_enable_generic(clk);
-		omap1_clk_disable(api_ck_p);
+
+		if (!api_ck_was_enabled)
+			api_ck_p->ops->disable(api_ck_p);
 	}
 
 	return retval;
 }
 
-static void omap1_clk_disable_dsp_domain(struct clk *clk)
+static void omap1_clk_disable_dsp_domain(struct omap1_clk *clk)
 {
-	if (omap1_clk_enable(api_ck_p) == 0) {
-		omap1_clk_disable_generic(clk);
-		omap1_clk_disable(api_ck_p);
-	}
+	bool api_ck_was_enabled;
+
+	api_ck_was_enabled = omap1_clk_is_enabled(&api_ck_p->hw);
+	if (!api_ck_was_enabled)
+		if (api_ck_p->ops->enable(api_ck_p) < 0)
+			return;
+
+	omap1_clk_disable_generic(clk);
+
+	if (!api_ck_was_enabled)
+		api_ck_p->ops->disable(api_ck_p);
 }
 
 const struct clkops clkops_dspck = {
@@ -521,7 +661,7 @@ const struct clkops clkops_dspck = {
 };
 
 /* XXX SYSC register handling does not belong in the clock framework */
-static int omap1_clk_enable_uart_functional_16xx(struct clk *clk)
+static int omap1_clk_enable_uart_functional_16xx(struct omap1_clk *clk)
 {
 	int ret;
 	struct uart_clk *uclk;
@@ -538,7 +678,7 @@ static int omap1_clk_enable_uart_functional_16xx(struct clk *clk)
 }
 
 /* XXX SYSC register handling does not belong in the clock framework */
-static void omap1_clk_disable_uart_functional_16xx(struct clk *clk)
+static void omap1_clk_disable_uart_functional_16xx(struct omap1_clk *clk)
 {
 	struct uart_clk *uclk;
 
@@ -555,20 +695,33 @@ const struct clkops clkops_uart_16xx = {
 	.disable	= omap1_clk_disable_uart_functional_16xx,
 };
 
-long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long omap1_clk_recalc_rate(struct clk_hw *hw, unsigned long p_rate)
 {
-	if (clk->round_rate != NULL)
-		return clk->round_rate(clk, rate);
+	struct omap1_clk *clk = to_omap1_clk(hw);
+
+	if (clk->recalc)
+		return clk->recalc(clk, p_rate);
 
 	return clk->rate;
 }
 
-int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
+static long omap1_clk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *p_rate)
+{
+	struct omap1_clk *clk = to_omap1_clk(hw);
+
+	if (clk->round_rate != NULL)
+		return clk->round_rate(clk, rate, p_rate);
+
+	return omap1_clk_recalc_rate(hw, *p_rate);
+}
+
+static int omap1_clk_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long p_rate)
 {
+	struct omap1_clk *clk = to_omap1_clk(hw);
 	int  ret = -EINVAL;
 
 	if (clk->set_rate)
-		ret = clk->set_rate(clk, rate);
+		ret = clk->set_rate(clk, rate, p_rate);
 	return ret;
 }
 
@@ -576,340 +729,105 @@ int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
  * Omap1 clock reset and init functions
  */
 
+static int omap1_clk_init_op(struct clk_hw *hw)
+{
+	struct omap1_clk *clk = to_omap1_clk(hw);
+
+	if (clk->init)
+		return clk->init(clk);
+
+	return 0;
+}
+
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 
-void omap1_clk_disable_unused(struct clk *clk)
+static void omap1_clk_disable_unused(struct clk_hw *hw)
 {
-	__u32 regval32;
+	struct omap1_clk *clk = to_omap1_clk(hw);
+	const char *name = clk_hw_get_name(hw);
 
 	/* Clocks in the DSP domain need api_ck. Just assume bootloader
 	 * has not enabled any DSP clocks */
 	if (clk->enable_reg == DSP_IDLECT2) {
-		pr_info("Skipping reset check for DSP domain clock \"%s\"\n",
-			clk->name);
+		pr_info("Skipping reset check for DSP domain clock \"%s\"\n", name);
 		return;
 	}
 
-	/* Is the clock already disabled? */
-	if (clk->flags & ENABLE_REG_32BIT)
-		regval32 = __raw_readl(clk->enable_reg);
-	else
-		regval32 = __raw_readw(clk->enable_reg);
-
-	if ((regval32 & (1 << clk->enable_bit)) == 0)
-		return;
-
-	printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name);
-	clk->ops->disable(clk);
+	pr_info("Disabling unused clock \"%s\"... ", name);
+	omap1_clk_disable(hw);
 	printk(" done\n");
 }
 
 #endif
 
+const struct clk_ops omap1_clk_gate_ops = {
+	.enable		= omap1_clk_enable,
+	.disable	= omap1_clk_disable,
+	.is_enabled	= omap1_clk_is_enabled,
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+	.disable_unused	= omap1_clk_disable_unused,
+#endif
+};
 
-int clk_enable(struct clk *clk)
-{
-	unsigned long flags;
-	int ret;
-
-	if (IS_ERR_OR_NULL(clk))
-		return -EINVAL;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = omap1_clk_enable(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	if (IS_ERR_OR_NULL(clk))
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	if (clk->usecount == 0) {
-		pr_err("Trying disable clock %s with 0 usecount\n",
-		       clk->name);
-		WARN_ON(1);
-		goto out;
-	}
-
-	omap1_clk_disable(clk);
-
-out:
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	unsigned long flags;
-	unsigned long ret;
-
-	if (IS_ERR_OR_NULL(clk))
-		return 0;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = clk->rate;
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*
- * Optional clock functions defined in include/linux/clk.h
- */
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	long ret;
-
-	if (IS_ERR_OR_NULL(clk))
-		return 0;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = omap1_clk_round_rate(clk, rate);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long flags;
-	int ret = -EINVAL;
-
-	if (IS_ERR_OR_NULL(clk))
-		return ret;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	ret = omap1_clk_set_rate(clk, rate);
-	if (ret == 0)
-		propagate_rate(clk);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n");
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL(clk_set_parent);
+const struct clk_ops omap1_clk_rate_ops = {
+	.recalc_rate	= omap1_clk_recalc_rate,
+	.round_rate	= omap1_clk_round_rate,
+	.set_rate	= omap1_clk_set_rate,
+	.init		= omap1_clk_init_op,
+};
 
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
+const struct clk_ops omap1_clk_full_ops = {
+	.enable		= omap1_clk_enable,
+	.disable	= omap1_clk_disable,
+	.is_enabled	= omap1_clk_is_enabled,
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+	.disable_unused	= omap1_clk_disable_unused,
+#endif
+	.recalc_rate	= omap1_clk_recalc_rate,
+	.round_rate	= omap1_clk_round_rate,
+	.set_rate	= omap1_clk_set_rate,
+	.init		= omap1_clk_init_op,
+};
 
 /*
  * OMAP specific clock functions shared between omap1 and omap2
  */
 
 /* Used for clocks that always have same value as the parent clock */
-unsigned long followparent_recalc(struct clk *clk)
+unsigned long followparent_recalc(struct omap1_clk *clk, unsigned long p_rate)
 {
-	return clk->parent->rate;
+	return p_rate;
 }
 
 /*
  * Used for clocks that have the same value as the parent clock,
  * divided by some factor
  */
-unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+unsigned long omap_fixed_divisor_recalc(struct omap1_clk *clk, unsigned long p_rate)
 {
 	WARN_ON(!clk->fixed_div);
 
-	return clk->parent->rate / clk->fixed_div;
-}
-
-void clk_reparent(struct clk *child, struct clk *parent)
-{
-	list_del_init(&child->sibling);
-	if (parent)
-		list_add(&child->sibling, &parent->children);
-	child->parent = parent;
-
-	/* now do the debugfs renaming to reattach the child
-	   to the proper parent */
+	return p_rate / clk->fixed_div;
 }
 
 /* Propagate rate to children */
-void propagate_rate(struct clk *tclk)
-{
-	struct clk *clkp;
-
-	list_for_each_entry(clkp, &tclk->children, sibling) {
-		if (clkp->recalc)
-			clkp->rate = clkp->recalc(clkp);
-		propagate_rate(clkp);
-	}
-}
-
-static LIST_HEAD(root_clks);
-
-/**
- * recalculate_root_clocks - recalculate and propagate all root clocks
- *
- * Recalculates all root clocks (clocks with no parent), which if the
- * clock's .recalc is set correctly, should also propagate their rates.
- * Called at init.
- */
-void recalculate_root_clocks(void)
+void propagate_rate(struct omap1_clk *tclk)
 {
 	struct clk *clkp;
 
-	list_for_each_entry(clkp, &root_clks, sibling) {
-		if (clkp->recalc)
-			clkp->rate = clkp->recalc(clkp);
-		propagate_rate(clkp);
-	}
-}
-
-/**
- * clk_preinit - initialize any fields in the struct clk before clk init
- * @clk: struct clk * to initialize
- *
- * Initialize any struct clk fields needed before normal clk initialization
- * can run.  No return value.
- */
-void clk_preinit(struct clk *clk)
-{
-	INIT_LIST_HEAD(&clk->children);
-}
-
-int clk_register(struct clk *clk)
-{
-	if (IS_ERR_OR_NULL(clk))
-		return -EINVAL;
-
-	/*
-	 * trap out already registered clocks
-	 */
-	if (clk->node.next || clk->node.prev)
-		return 0;
-
-	mutex_lock(&clocks_mutex);
-	if (clk->parent)
-		list_add(&clk->sibling, &clk->parent->children);
-	else
-		list_add(&clk->sibling, &root_clks);
-
-	list_add(&clk->node, &clocks);
-	if (clk->init)
-		clk->init(clk);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
-	if (IS_ERR_OR_NULL(clk))
+	/* depend on CCF ability to recalculate new rates across whole clock subtree */
+	if (WARN_ON(!(clk_hw_get_flags(&tclk->hw) & CLK_GET_RATE_NOCACHE)))
 		return;
 
-	mutex_lock(&clocks_mutex);
-	list_del(&clk->sibling);
-	list_del(&clk->node);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-void clk_enable_init_clocks(void)
-{
-	struct clk *clkp;
-
-	list_for_each_entry(clkp, &clocks, node)
-		if (clkp->flags & ENABLE_ON_INIT)
-			clk_enable(clkp);
-}
-
-/**
- * omap_clk_get_by_name - locate OMAP struct clk by its name
- * @name: name of the struct clk to locate
- *
- * Locate an OMAP struct clk by its name.  Assumes that struct clk
- * names are unique.  Returns NULL if not found or a pointer to the
- * struct clk if found.
- */
-struct clk *omap_clk_get_by_name(const char *name)
-{
-	struct clk *c;
-	struct clk *ret = NULL;
-
-	mutex_lock(&clocks_mutex);
-
-	list_for_each_entry(c, &clocks, node) {
-		if (!strcmp(c->name, name)) {
-			ret = c;
-			break;
-		}
-	}
-
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-
-int omap_clk_enable_autoidle_all(void)
-{
-	struct clk *c;
-	unsigned long flags;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-
-	list_for_each_entry(c, &clocks, node)
-		if (c->ops->allow_idle)
-			c->ops->allow_idle(c);
-
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return 0;
-}
-
-int omap_clk_disable_autoidle_all(void)
-{
-	struct clk *c;
-	unsigned long flags;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-
-	list_for_each_entry(c, &clocks, node)
-		if (c->ops->deny_idle)
-			c->ops->deny_idle(c);
-
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return 0;
-}
-
-/*
- * Low level helpers
- */
-static int clkll_enable_null(struct clk *clk)
-{
-	return 0;
-}
+	clkp = clk_get_sys(NULL, clk_hw_get_name(&tclk->hw));
+	if (WARN_ON(!clkp))
+		return;
 
-static void clkll_disable_null(struct clk *clk)
-{
+	clk_get_rate(clkp);
+	clk_put(clkp);
 }
 
-const struct clkops clkops_null = {
-	.enable		= clkll_enable_null,
-	.disable	= clkll_disable_null,
+const struct clk_ops omap1_clk_null_ops = {
 };
 
 /*
@@ -917,115 +835,6 @@ const struct clkops clkops_null = {
  *
  * Used for clock aliases that are needed on some OMAPs, but not others
  */
-struct clk dummy_ck = {
-	.name	= "dummy",
-	.ops	= &clkops_null,
+struct omap1_clk dummy_ck __refdata = {
+	.hw.init	= CLK_HW_INIT_NO_PARENT("dummy", &omap1_clk_null_ops, 0),
 };
-
-/*
- *
- */
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-/*
- * Disable any unused clocks left on by the bootloader
- */
-static int __init clk_disable_unused(void)
-{
-	struct clk *ck;
-	unsigned long flags;
-
-	pr_info("clock: disabling unused clocks to save power\n");
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	list_for_each_entry(ck, &clocks, node) {
-		if (ck->ops == &clkops_null)
-			continue;
-
-		if (ck->usecount > 0 || !ck->enable_reg)
-			continue;
-
-		omap1_clk_disable_unused(ck);
-	}
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-
-	return 0;
-}
-late_initcall(clk_disable_unused);
-late_initcall(omap_clk_enable_autoidle_all);
-#endif
-
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-/*
- *	debugfs support to trace clock tree hierarchy and attributes
- */
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static struct dentry *clk_debugfs_root;
-
-static int debug_clock_show(struct seq_file *s, void *unused)
-{
-	struct clk *c;
-	struct clk *pa;
-
-	mutex_lock(&clocks_mutex);
-	seq_printf(s, "%-30s %-30s %-10s %s\n",
-		   "clock-name", "parent-name", "rate", "use-count");
-
-	list_for_each_entry(c, &clocks, node) {
-		pa = c->parent;
-		seq_printf(s, "%-30s %-30s %-10lu %d\n",
-			   c->name, pa ? pa->name : "none", c->rate,
-			   c->usecount);
-	}
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-
-DEFINE_SHOW_ATTRIBUTE(debug_clock);
-
-static void clk_debugfs_register_one(struct clk *c)
-{
-	struct dentry *d;
-	struct clk *pa = c->parent;
-
-	d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
-	c->dent = d;
-
-	debugfs_create_u8("usecount", S_IRUGO, c->dent, &c->usecount);
-	debugfs_create_ulong("rate", S_IRUGO, c->dent, &c->rate);
-	debugfs_create_x8("flags", S_IRUGO, c->dent, &c->flags);
-}
-
-static void clk_debugfs_register(struct clk *c)
-{
-	struct clk *pa = c->parent;
-
-	if (pa && !pa->dent)
-		clk_debugfs_register(pa);
-
-	if (!c->dent)
-		clk_debugfs_register_one(c);
-}
-
-static int __init clk_debugfs_init(void)
-{
-	struct clk *c;
-	struct dentry *d;
-
-	d = debugfs_create_dir("clock", NULL);
-	clk_debugfs_root = d;
-
-	list_for_each_entry(c, &clocks, node)
-		clk_debugfs_register(c);
-
-	debugfs_create_file("summary", S_IRUGO, d, NULL, &debug_clock_fops);
-
-	return 0;
-}
-late_initcall(clk_debugfs_init);
-
-#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index f3b8811f5ac0..16cfb2e86ee4 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -11,12 +11,11 @@
 #define __ARCH_ARM_MACH_OMAP1_CLOCK_H
 
 #include <linux/clk.h>
-#include <linux/list.h>
-
 #include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 
 struct module;
-struct clk;
+struct omap1_clk;
 
 struct omap_clk {
 	u16				cpu;
@@ -29,7 +28,7 @@ struct omap_clk {
 		.lk = {			\
 			.dev_id = dev,	\
 			.con_id = con,	\
-			.clk = ck,	\
+			.clk_hw = ck,	\
 		},			\
 	}
 
@@ -40,68 +39,30 @@ struct omap_clk {
 #define CK_16XX		(1 << 3)	/* 16xx, 17xx, 5912 */
 #define CK_1710		(1 << 4)	/* 1710 extra for rate selection */
 
-
-/* Temporary, needed during the common clock framework conversion */
-#define __clk_get_name(clk)	(clk->name)
-#define __clk_get_parent(clk)	(clk->parent)
-#define __clk_get_rate(clk)	(clk->rate)
-
 /**
  * struct clkops - some clock function pointers
  * @enable: fn ptr that enables the current clock in hardware
  * @disable: fn ptr that enables the current clock in hardware
- * @find_idlest: function returning the IDLEST register for the clock's IP blk
- * @find_companion: function returning the "companion" clk reg for the clock
  * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
- * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
- *
- * A "companion" clk is an accompanying clock to the one being queried
- * that must be enabled for the IP module connected to the clock to
- * become accessible by the hardware.  Neither @find_idlest nor
- * @find_companion should be needed; that information is IP
- * block-specific; the hwmod code has been created to handle this, but
- * until hwmod data is ready and drivers have been converted to use PM
- * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
- * @find_companion must, unfortunately, remain.
  */
 struct clkops {
-	int			(*enable)(struct clk *);
-	void			(*disable)(struct clk *);
-	void			(*find_idlest)(struct clk *, void __iomem **,
-					       u8 *, u8 *);
-	void			(*find_companion)(struct clk *, void __iomem **,
-						  u8 *);
-	void			(*allow_idle)(struct clk *);
-	void			(*deny_idle)(struct clk *);
+	int			(*enable)(struct omap1_clk *clk);
+	void			(*disable)(struct omap1_clk *clk);
 };
 
 /*
  * struct clk.flags possibilities
  *
  * XXX document the rest of the clock flags here
- *
- * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
- *     bits share the same register.  This flag allows the
- *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
- *     should be used.  This is a temporary solution - a better approach
- *     would be to associate clock type-specific data with the clock,
- *     similar to the struct dpll_data approach.
  */
 #define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
 #define CLOCK_IDLE_CONTROL	(1 << 1)
 #define CLOCK_NO_IDLE_PARENT	(1 << 2)
-#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
-#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
-#define CLOCK_CLKOUTX2		(1 << 5)
 
 /**
- * struct clk - OMAP struct clk
- * @node: list_head connecting this clock into the full clock list
+ * struct omap1_clk - OMAP1 struct clk
+ * @hw: struct clk_hw for common clock framework integration
  * @ops: struct clkops * for this clock
- * @name: the name of the clock in the hardware (used in hwmod data and debug)
- * @parent: pointer to this clock's parent struct clk
- * @children: list_head connecting to the child clks' @sibling list_heads
- * @sibling: list_head connecting this clk to its parent clk's @children
  * @rate: current clock rate
  * @enable_reg: register to write to enable the clock (see @enable_bit)
  * @recalc: fn ptr that returns the clock's current rate
@@ -109,123 +70,65 @@ struct clkops {
  * @round_rate: fn ptr that can round the clock's current rate
  * @init: fn ptr to do clock-specific initialization
  * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
- * @usecount: number of users that have requested this clock to be enabled
  * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
  * @flags: see "struct clk.flags possibilities" above
  * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
- * @src_offset: bitshift for source selection bitfield (OMAP1 only)
- *
- * XXX @rate_offset, @src_offset should probably be removed and OMAP1
- * clock code converted to use clksel.
- *
- * XXX @usecount is poorly named.  It should be "enable_count" or
- * something similar.  "users" in the description refers to kernel
- * code (core code or drivers) that have called clk_enable() and not
- * yet called clk_disable(); the usecount of parent clocks is also
- * incremented by the clock code when clk_enable() is called on child
- * clocks and decremented by the clock code when clk_disable() is
- * called on child clocks.
- *
- * XXX @clkdm, @usecount, @children, @sibling should be marked for
- * internal use only.
- *
- * @children and @sibling are used to optimize parent-to-child clock
- * tree traversals.  (child-to-parent traversals use @parent.)
- *
- * XXX The notion of the clock's current rate probably needs to be
- * separated from the clock's target rate.
  */
-struct clk {
-	struct list_head	node;
+struct omap1_clk {
+	struct clk_hw		hw;
 	const struct clkops	*ops;
-	const char		*name;
-	struct clk		*parent;
-	struct list_head	children;
-	struct list_head	sibling;	/* node for children */
 	unsigned long		rate;
 	void __iomem		*enable_reg;
-	unsigned long		(*recalc)(struct clk *);
-	int			(*set_rate)(struct clk *, unsigned long);
-	long			(*round_rate)(struct clk *, unsigned long);
-	void			(*init)(struct clk *);
+	unsigned long		(*recalc)(struct omap1_clk *clk, unsigned long rate);
+	int			(*set_rate)(struct omap1_clk *clk, unsigned long rate,
+					    unsigned long p_rate);
+	long			(*round_rate)(struct omap1_clk *clk, unsigned long rate,
+					      unsigned long *p_rate);
+	int			(*init)(struct omap1_clk *clk);
 	u8			enable_bit;
-	s8			usecount;
 	u8			fixed_div;
 	u8			flags;
 	u8			rate_offset;
-	u8			src_offset;
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-	struct dentry		*dent;	/* For visible tree hierarchy */
-#endif
-};
-
-struct clk_functions {
-	int		(*clk_enable)(struct clk *clk);
-	void		(*clk_disable)(struct clk *clk);
-	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
-	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
-	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
-	void		(*clk_allow_idle)(struct clk *clk);
-	void		(*clk_deny_idle)(struct clk *clk);
-	void		(*clk_disable_unused)(struct clk *clk);
 };
+#define to_omap1_clk(_hw)	container_of(_hw, struct omap1_clk, hw)
 
-extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_preinit(struct clk *clk);
-extern int clk_register(struct clk *clk);
-extern void clk_reparent(struct clk *child, struct clk *parent);
-extern void clk_unregister(struct clk *clk);
-extern void propagate_rate(struct clk *clk);
-extern void recalculate_root_clocks(void);
-extern unsigned long followparent_recalc(struct clk *clk);
-extern void clk_enable_init_clocks(void);
-unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-extern struct clk *omap_clk_get_by_name(const char *name);
-extern int omap_clk_enable_autoidle_all(void);
-extern int omap_clk_disable_autoidle_all(void);
+void propagate_rate(struct omap1_clk *clk);
+unsigned long followparent_recalc(struct omap1_clk *clk, unsigned long p_rate);
+unsigned long omap_fixed_divisor_recalc(struct omap1_clk *clk, unsigned long p_rate);
 
-extern const struct clkops clkops_null;
-
-extern struct clk dummy_ck;
+extern struct omap1_clk dummy_ck;
 
 int omap1_clk_init(void);
 void omap1_clk_late_init(void);
-extern int omap1_clk_enable(struct clk *clk);
-extern void omap1_clk_disable(struct clk *clk);
-extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
-extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate);
-extern unsigned long omap1_ckctl_recalc(struct clk *clk);
-extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
-extern unsigned long omap1_sossi_recalc(struct clk *clk);
-extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
-extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate);
-extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate);
-extern unsigned long omap1_uart_recalc(struct clk *clk);
-extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate);
-extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate);
-extern void omap1_init_ext_clk(struct clk *clk);
-extern int omap1_select_table_rate(struct clk *clk, unsigned long rate);
-extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate);
-extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
-extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
-extern unsigned long omap1_watchdog_recalc(struct clk *clk);
-
-#ifdef CONFIG_OMAP_RESET_CLOCKS
-extern void omap1_clk_disable_unused(struct clk *clk);
-#else
-#define omap1_clk_disable_unused	NULL
-#endif
+unsigned long omap1_ckctl_recalc(struct omap1_clk *clk, unsigned long p_rate);
+long omap1_round_sossi_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate);
+int omap1_set_sossi_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate);
+unsigned long omap1_sossi_recalc(struct omap1_clk *clk, unsigned long p_rate);
+unsigned long omap1_ckctl_recalc_dsp_domain(struct omap1_clk *clk, unsigned long p_rate);
+int omap1_clk_set_rate_dsp_domain(struct omap1_clk *clk, unsigned long rate,
+				  unsigned long p_rate);
+long omap1_round_uart_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate);
+int omap1_set_uart_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate);
+unsigned long omap1_uart_recalc(struct omap1_clk *clk, unsigned long p_rate);
+int omap1_set_ext_clk_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate);
+long omap1_round_ext_clk_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate);
+int omap1_init_ext_clk(struct omap1_clk *clk);
+int omap1_select_table_rate(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate);
+long omap1_round_to_table_rate(struct omap1_clk *clk, unsigned long rate, unsigned long *p_rate);
+int omap1_clk_set_rate_ckctl_arm(struct omap1_clk *clk, unsigned long rate, unsigned long p_rate);
+long omap1_clk_round_rate_ckctl_arm(struct omap1_clk *clk, unsigned long rate,
+				    unsigned long *p_rate);
 
 struct uart_clk {
-	struct clk	clk;
-	unsigned long	sysc_addr;
+	struct omap1_clk	clk;
+	unsigned long		sysc_addr;
 };
 
 /* Provide a method for preventing idling some ARM IDLECT clocks */
 struct arm_idlect1_clk {
-	struct clk	clk;
-	unsigned long	no_idle_count;
-	__u8		idlect_shift;
+	struct omap1_clk	clk;
+	unsigned long		no_idle_count;
+	__u8			idlect_shift;
 };
 
 /* ARM_CKCTL bit shifts */
@@ -275,14 +178,18 @@ struct arm_idlect1_clk {
 #define SOFT_REQ_REG2		0xfffe0880
 
 extern __u32 arm_idlect1_mask;
-extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
+extern struct omap1_clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
 
 extern const struct clkops clkops_dspck;
-extern const struct clkops clkops_dummy;
 extern const struct clkops clkops_uart_16xx;
 extern const struct clkops clkops_generic;
 
 /* used for passing SoC type to omap1_{select,round_to}_table_rate() */
 extern u32 cpu_mask;
 
+extern const struct clk_ops omap1_clk_null_ops;
+extern const struct clk_ops omap1_clk_gate_ops;
+extern const struct clk_ops omap1_clk_rate_ops;
+extern const struct clk_ops omap1_clk_full_ops;
+
 #endif
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 3ebcd96efbff..c58d200e4816 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -14,16 +14,17 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
 #include <linux/cpufreq.h>
 #include <linux/delay.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach-types.h>  /* for machine_is_* */
 
 #include "soc.h"
-
-#include <mach/hardware.h>
-#include <mach/usb.h>   /* for OTG_BASE */
-
+#include "hardware.h"
+#include "usb.h"   /* for OTG_BASE */
 #include "iomap.h"
 #include "clock.h"
 #include "sram.h"
@@ -72,16 +73,18 @@
  * Omap1 clocks
  */
 
-static struct clk ck_ref = {
-	.name		= "ck_ref",
-	.ops		= &clkops_null,
+static struct omap1_clk ck_ref = {
+	.hw.init	= CLK_HW_INIT_NO_PARENT("ck_ref", &omap1_clk_rate_ops, 0),
 	.rate		= 12000000,
 };
 
-static struct clk ck_dpll1 = {
-	.name		= "ck_dpll1",
-	.ops		= &clkops_null,
-	.parent		= &ck_ref,
+static struct omap1_clk ck_dpll1 = {
+	.hw.init	= CLK_HW_INIT("ck_dpll1", "ck_ref", &omap1_clk_rate_ops,
+				      /*
+				       * force recursive refresh of rates of the clock
+				       * and its children when clk_get_rate() is called
+				       */
+				      CLK_GET_RATE_NOCACHE),
 };
 
 /*
@@ -90,33 +93,28 @@ static struct clk ck_dpll1 = {
  */
 static struct arm_idlect1_clk ck_dpll1out = {
 	.clk = {
-		.name		= "ck_dpll1out",
+		.hw.init	= CLK_HW_INIT("ck_dpll1out", "ck_dpll1", &omap1_clk_gate_ops, 0),
 		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT |
-				  ENABLE_ON_INIT,
+		.flags		= CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_CKOUT_ARM,
-		.recalc		= &followparent_recalc,
 	},
 	.idlect_shift	= IDL_CLKOUT_ARM_SHIFT,
 };
 
-static struct clk sossi_ck = {
-	.name		= "ck_sossi",
+static struct omap1_clk sossi_ck = {
+	.hw.init	= CLK_HW_INIT("ck_sossi", "ck_dpll1out", &omap1_clk_full_ops, 0),
 	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1out.clk,
 	.flags		= CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
 	.enable_bit	= CONF_MOD_SOSSI_CLK_EN_R,
 	.recalc		= &omap1_sossi_recalc,
+	.round_rate	= &omap1_round_sossi_rate,
 	.set_rate	= &omap1_set_sossi_rate,
 };
 
-static struct clk arm_ck = {
-	.name		= "arm_ck",
-	.ops		= &clkops_null,
-	.parent		= &ck_dpll1,
+static struct omap1_clk arm_ck = {
+	.hw.init	= CLK_HW_INIT("arm_ck", "ck_dpll1", &omap1_clk_rate_ops, 0),
 	.rate_offset	= CKCTL_ARMDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
 	.round_rate	= omap1_clk_round_rate_ckctl_arm,
@@ -125,9 +123,9 @@ static struct clk arm_ck = {
 
 static struct arm_idlect1_clk armper_ck = {
 	.clk = {
-		.name		= "armper_ck",
+		.hw.init	= CLK_HW_INIT("armper_ck", "ck_dpll1", &omap1_clk_full_ops,
+					      CLK_IS_CRITICAL),
 		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_PERCK,
@@ -143,47 +141,41 @@ static struct arm_idlect1_clk armper_ck = {
  * FIXME: This clock seems to be necessary but no-one has asked for its
  * activation.  [ GPIO code for 1510 ]
  */
-static struct clk arm_gpio_ck = {
-	.name		= "ick",
+static struct omap1_clk arm_gpio_ck = {
+	.hw.init	= CLK_HW_INIT("ick", "ck_dpll1", &omap1_clk_gate_ops, CLK_IS_CRITICAL),
 	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
-	.flags		= ENABLE_ON_INIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 	.enable_bit	= EN_GPIOCK,
-	.recalc		= &followparent_recalc,
 };
 
 static struct arm_idlect1_clk armxor_ck = {
 	.clk = {
-		.name		= "armxor_ck",
+		.hw.init	= CLK_HW_INIT("armxor_ck", "ck_ref", &omap1_clk_gate_ops,
+					      CLK_IS_CRITICAL),
 		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_XORPCK,
-		.recalc		= &followparent_recalc,
 	},
 	.idlect_shift	= IDLXORP_ARM_SHIFT,
 };
 
 static struct arm_idlect1_clk armtim_ck = {
 	.clk = {
-		.name		= "armtim_ck",
+		.hw.init	= CLK_HW_INIT("armtim_ck", "ck_ref", &omap1_clk_gate_ops,
+					      CLK_IS_CRITICAL),
 		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_TIMCK,
-		.recalc		= &followparent_recalc,
 	},
 	.idlect_shift	= IDLTIM_ARM_SHIFT,
 };
 
 static struct arm_idlect1_clk armwdt_ck = {
 	.clk = {
-		.name		= "armwdt_ck",
+		.hw.init	= CLK_HW_INIT("armwdt_ck", "ck_ref", &omap1_clk_full_ops, 0),
 		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_WDTCK,
@@ -193,11 +185,8 @@ static struct arm_idlect1_clk armwdt_ck = {
 	.idlect_shift	= IDLWDT_ARM_SHIFT,
 };
 
-static struct clk arminth_ck16xx = {
-	.name		= "arminth_ck",
-	.ops		= &clkops_null,
-	.parent		= &arm_ck,
-	.recalc		= &followparent_recalc,
+static struct omap1_clk arminth_ck16xx = {
+	.hw.init	= CLK_HW_INIT("arminth_ck", "arm_ck", &omap1_clk_null_ops, 0),
 	/* Note: On 16xx the frequency can be divided by 2 by programming
 	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
 	 *
@@ -205,10 +194,9 @@ static struct clk arminth_ck16xx = {
 	 */
 };
 
-static struct clk dsp_ck = {
-	.name		= "dsp_ck",
+static struct omap1_clk dsp_ck = {
+	.hw.init	= CLK_HW_INIT("dsp_ck", "ck_dpll1", &omap1_clk_full_ops, 0),
 	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_CKCTL),
 	.enable_bit	= EN_DSPCK,
 	.rate_offset	= CKCTL_DSPDIV_OFFSET,
@@ -217,20 +205,17 @@ static struct clk dsp_ck = {
 	.set_rate	= omap1_clk_set_rate_ckctl_arm,
 };
 
-static struct clk dspmmu_ck = {
-	.name		= "dspmmu_ck",
-	.ops		= &clkops_null,
-	.parent		= &ck_dpll1,
+static struct omap1_clk dspmmu_ck = {
+	.hw.init	= CLK_HW_INIT("dspmmu_ck", "ck_dpll1", &omap1_clk_rate_ops, 0),
 	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,
 	.round_rate	= omap1_clk_round_rate_ckctl_arm,
 	.set_rate	= omap1_clk_set_rate_ckctl_arm,
 };
 
-static struct clk dspper_ck = {
-	.name		= "dspper_ck",
+static struct omap1_clk dspper_ck = {
+	.hw.init	= CLK_HW_INIT("dspper_ck", "ck_dpll1", &omap1_clk_full_ops, 0),
 	.ops		= &clkops_dspck,
-	.parent		= &ck_dpll1,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_PERCK,
 	.rate_offset	= CKCTL_PERDIV_OFFSET,
@@ -239,29 +224,23 @@ static struct clk dspper_ck = {
 	.set_rate	= &omap1_clk_set_rate_dsp_domain,
 };
 
-static struct clk dspxor_ck = {
-	.name		= "dspxor_ck",
+static struct omap1_clk dspxor_ck = {
+	.hw.init	= CLK_HW_INIT("dspxor_ck", "ck_ref", &omap1_clk_gate_ops, 0),
 	.ops		= &clkops_dspck,
-	.parent		= &ck_ref,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_XORPCK,
-	.recalc		= &followparent_recalc,
 };
 
-static struct clk dsptim_ck = {
-	.name		= "dsptim_ck",
+static struct omap1_clk dsptim_ck = {
+	.hw.init	= CLK_HW_INIT("dsptim_ck", "ck_ref", &omap1_clk_gate_ops, 0),
 	.ops		= &clkops_dspck,
-	.parent		= &ck_ref,
 	.enable_reg	= DSP_IDLECT2,
 	.enable_bit	= EN_DSPTIMCK,
-	.recalc		= &followparent_recalc,
 };
 
 static struct arm_idlect1_clk tc_ck = {
 	.clk = {
-		.name		= "tc_ck",
-		.ops		= &clkops_null,
-		.parent		= &ck_dpll1,
+		.hw.init	= CLK_HW_INIT("tc_ck", "ck_dpll1", &omap1_clk_rate_ops, 0),
 		.flags		= CLOCK_IDLE_CONTROL,
 		.rate_offset	= CKCTL_TCDIV_OFFSET,
 		.recalc		= &omap1_ckctl_recalc,
@@ -271,117 +250,88 @@ static struct arm_idlect1_clk tc_ck = {
 	.idlect_shift	= IDLIF_ARM_SHIFT,
 };
 
-static struct clk arminth_ck1510 = {
-	.name		= "arminth_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
+static struct omap1_clk arminth_ck1510 = {
+	.hw.init	= CLK_HW_INIT("arminth_ck", "tc_ck", &omap1_clk_null_ops, 0),
 	/* Note: On 1510 the frequency follows TC_CK
 	 *
 	 * 16xx version is in MPU clocks.
 	 */
 };
 
-static struct clk tipb_ck = {
+static struct omap1_clk tipb_ck = {
 	/* No-idle controlled by "tc_ck" */
-	.name		= "tipb_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
+	.hw.init	= CLK_HW_INIT("tipb_ck", "tc_ck", &omap1_clk_null_ops, 0),
 };
 
-static struct clk l3_ocpi_ck = {
+static struct omap1_clk l3_ocpi_ck = {
 	/* No-idle controlled by "tc_ck" */
-	.name		= "l3_ocpi_ck",
+	.hw.init	= CLK_HW_INIT("l3_ocpi_ck", "tc_ck", &omap1_clk_gate_ops, 0),
 	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
 	.enable_bit	= EN_OCPI_CK,
-	.recalc		= &followparent_recalc,
 };
 
-static struct clk tc1_ck = {
-	.name		= "tc1_ck",
+static struct omap1_clk tc1_ck = {
+	.hw.init	= CLK_HW_INIT("tc1_ck", "tc_ck", &omap1_clk_gate_ops, 0),
 	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
 	.enable_bit	= EN_TC1_CK,
-	.recalc		= &followparent_recalc,
 };
 
 /*
  * FIXME: This clock seems to be necessary but no-one has asked for its
  * activation.  [ pm.c (SRAM), CCP, Camera ]
  */
-static struct clk tc2_ck = {
-	.name		= "tc2_ck",
+
+static struct omap1_clk tc2_ck = {
+	.hw.init	= CLK_HW_INIT("tc2_ck", "tc_ck", &omap1_clk_gate_ops, CLK_IS_CRITICAL),
 	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
-	.flags		= ENABLE_ON_INIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
 	.enable_bit	= EN_TC2_CK,
-	.recalc		= &followparent_recalc,
 };
 
-static struct clk dma_ck = {
+static struct omap1_clk dma_ck = {
 	/* No-idle controlled by "tc_ck" */
-	.name		= "dma_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
+	.hw.init	= CLK_HW_INIT("dma_ck", "tc_ck", &omap1_clk_null_ops, 0),
 };
 
-static struct clk dma_lcdfree_ck = {
-	.name		= "dma_lcdfree_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
+static struct omap1_clk dma_lcdfree_ck = {
+	.hw.init	= CLK_HW_INIT("dma_lcdfree_ck", "tc_ck", &omap1_clk_null_ops, 0),
 };
 
 static struct arm_idlect1_clk api_ck = {
 	.clk = {
-		.name		= "api_ck",
+		.hw.init	= CLK_HW_INIT("api_ck", "tc_ck", &omap1_clk_gate_ops, 0),
 		.ops		= &clkops_generic,
-		.parent		= &tc_ck.clk,
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_APICK,
-		.recalc		= &followparent_recalc,
 	},
 	.idlect_shift	= IDLAPI_ARM_SHIFT,
 };
 
 static struct arm_idlect1_clk lb_ck = {
 	.clk = {
-		.name		= "lb_ck",
+		.hw.init	= CLK_HW_INIT("lb_ck", "tc_ck", &omap1_clk_gate_ops, 0),
 		.ops		= &clkops_generic,
-		.parent		= &tc_ck.clk,
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_LBCK,
-		.recalc		= &followparent_recalc,
 	},
 	.idlect_shift	= IDLLB_ARM_SHIFT,
 };
 
-static struct clk rhea1_ck = {
-	.name		= "rhea1_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
+static struct omap1_clk rhea1_ck = {
+	.hw.init	= CLK_HW_INIT("rhea1_ck", "tc_ck", &omap1_clk_null_ops, 0),
 };
 
-static struct clk rhea2_ck = {
-	.name		= "rhea2_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
+static struct omap1_clk rhea2_ck = {
+	.hw.init	= CLK_HW_INIT("rhea2_ck", "tc_ck", &omap1_clk_null_ops, 0),
 };
 
-static struct clk lcd_ck_16xx = {
-	.name		= "lcd_ck",
+static struct omap1_clk lcd_ck_16xx = {
+	.hw.init	= CLK_HW_INIT("lcd_ck", "ck_dpll1", &omap1_clk_full_ops, 0),
 	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
 	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 	.enable_bit	= EN_LCDCK,
 	.rate_offset	= CKCTL_LCDDIV_OFFSET,
@@ -392,9 +342,8 @@ static struct clk lcd_ck_16xx = {
 
 static struct arm_idlect1_clk lcd_ck_1510 = {
 	.clk = {
-		.name		= "lcd_ck",
+		.hw.init	= CLK_HW_INIT("lcd_ck", "ck_dpll1", &omap1_clk_full_ops, 0),
 		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_LCDCK,
@@ -406,37 +355,35 @@ static struct arm_idlect1_clk lcd_ck_1510 = {
 	.idlect_shift	= OMAP1510_IDLLCD_ARM_SHIFT,
 };
 
+
 /*
  * XXX The enable_bit here is misused - it simply switches between 12MHz
- * and 48MHz.  Reimplement with clksel.
+ * and 48MHz.  Reimplement with clk_mux.
  *
  * XXX does this need SYSC register handling?
  */
-static struct clk uart1_1510 = {
-	.name		= "uart1_ck",
-	.ops		= &clkops_null,
+static struct omap1_clk uart1_1510 = {
 	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
+	.hw.init	= CLK_HW_INIT("uart1_ck", "armper_ck", &omap1_clk_full_ops, 0),
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= CONF_MOD_UART1_CLK_MODE_R,
+	.round_rate	= &omap1_round_uart_rate,
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
 };
 
 /*
  * XXX The enable_bit here is misused - it simply switches between 12MHz
- * and 48MHz.  Reimplement with clksel.
+ * and 48MHz.  Reimplement with clk_mux.
  *
  * XXX SYSC register handling does not belong in the clock framework
  */
 static struct uart_clk uart1_16xx = {
 	.clk	= {
-		.name		= "uart1_ck",
 		.ops		= &clkops_uart_16xx,
 		/* Direct from ULPD, no real parent */
-		.parent		= &armper_ck.clk,
+		.hw.init	= CLK_HW_INIT("uart1_ck", "armper_ck", &omap1_clk_full_ops, 0),
 		.rate		= 48000000,
 		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
@@ -447,54 +394,49 @@ static struct uart_clk uart1_16xx = {
 
 /*
  * XXX The enable_bit here is misused - it simply switches between 12MHz
- * and 48MHz.  Reimplement with clksel.
+ * and 48MHz.  Reimplement with clk_mux.
  *
  * XXX does this need SYSC register handling?
  */
-static struct clk uart2_ck = {
-	.name		= "uart2_ck",
-	.ops		= &clkops_null,
+static struct omap1_clk uart2_ck = {
 	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
+	.hw.init	= CLK_HW_INIT("uart2_ck", "armper_ck", &omap1_clk_full_ops, 0),
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= CONF_MOD_UART2_CLK_MODE_R,
+	.round_rate	= &omap1_round_uart_rate,
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
 };
 
 /*
  * XXX The enable_bit here is misused - it simply switches between 12MHz
- * and 48MHz.  Reimplement with clksel.
+ * and 48MHz.  Reimplement with clk_mux.
  *
  * XXX does this need SYSC register handling?
  */
-static struct clk uart3_1510 = {
-	.name		= "uart3_ck",
-	.ops		= &clkops_null,
+static struct omap1_clk uart3_1510 = {
 	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
+	.hw.init	= CLK_HW_INIT("uart3_ck", "armper_ck", &omap1_clk_full_ops, 0),
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= CONF_MOD_UART3_CLK_MODE_R,
+	.round_rate	= &omap1_round_uart_rate,
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
 };
 
 /*
  * XXX The enable_bit here is misused - it simply switches between 12MHz
- * and 48MHz.  Reimplement with clksel.
+ * and 48MHz.  Reimplement with clk_mux.
  *
  * XXX SYSC register handling does not belong in the clock framework
  */
 static struct uart_clk uart3_16xx = {
 	.clk	= {
-		.name		= "uart3_ck",
 		.ops		= &clkops_uart_16xx,
 		/* Direct from ULPD, no real parent */
-		.parent		= &armper_ck.clk,
+		.hw.init	= CLK_HW_INIT("uart3_ck", "armper_ck", &omap1_clk_full_ops, 0),
 		.rate		= 48000000,
 		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
@@ -503,30 +445,30 @@ static struct uart_clk uart3_16xx = {
 	.sysc_addr	= 0xfffb9854,
 };
 
-static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
-	.name		= "usb_clko",
+static struct omap1_clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("usb_clko", &omap1_clk_full_ops, 0),
 	.rate		= 6000000,
 	.flags		= ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
 	.enable_bit	= USB_MCLK_EN_BIT,
 };
 
-static struct clk usb_hhc_ck1510 = {
-	.name		= "usb_hhc_ck",
+static struct omap1_clk usb_hhc_ck1510 = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("usb_hhc_ck", &omap1_clk_full_ops, 0),
 	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
 	.flags		= ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= USB_HOST_HHC_UHOST_EN,
 };
 
-static struct clk usb_hhc_ck16xx = {
-	.name		= "usb_hhc_ck",
+static struct omap1_clk usb_hhc_ck16xx = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("usb_hhc_ck", &omap1_clk_full_ops, 0),
 	.rate		= 48000000,
 	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
 	.flags		= ENABLE_REG_32BIT,
@@ -534,46 +476,46 @@ static struct clk usb_hhc_ck16xx = {
 	.enable_bit	= OTG_SYSCON_2_UHOST_EN_SHIFT
 };
 
-static struct clk usb_dc_ck = {
-	.name		= "usb_dc_ck",
+static struct omap1_clk usb_dc_ck = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("usb_dc_ck", &omap1_clk_full_ops, 0),
 	.rate		= 48000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= SOFT_USB_OTG_DPLL_REQ_SHIFT,
 };
 
-static struct clk uart1_7xx = {
-	.name		= "uart1_ck",
+static struct omap1_clk uart1_7xx = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("uart1_ck", &omap1_clk_full_ops, 0),
 	.rate		= 12000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 9,
 };
 
-static struct clk uart2_7xx = {
-	.name		= "uart2_ck",
+static struct omap1_clk uart2_7xx = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("uart2_ck", &omap1_clk_full_ops, 0),
 	.rate		= 12000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 11,
 };
 
-static struct clk mclk_1510 = {
-	.name		= "mclk",
+static struct omap1_clk mclk_1510 = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("mclk", &omap1_clk_full_ops, 0),
 	.rate		= 12000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= SOFT_COM_MCKO_REQ_SHIFT,
 };
 
-static struct clk mclk_16xx = {
-	.name		= "mclk",
+static struct omap1_clk mclk_16xx = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("mclk", &omap1_clk_full_ops, 0),
 	.enable_reg	= OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
 	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
 	.set_rate	= &omap1_set_ext_clk_rate,
@@ -581,17 +523,16 @@ static struct clk mclk_16xx = {
 	.init		= &omap1_init_ext_clk,
 };
 
-static struct clk bclk_1510 = {
-	.name		= "bclk",
-	.ops		= &clkops_generic,
+static struct omap1_clk bclk_1510 = {
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("bclk", &omap1_clk_rate_ops, 0),
 	.rate		= 12000000,
 };
 
-static struct clk bclk_16xx = {
-	.name		= "bclk",
+static struct omap1_clk bclk_16xx = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.hw.init	= CLK_HW_INIT_NO_PARENT("bclk", &omap1_clk_full_ops, 0),
 	.enable_reg	= OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
 	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
 	.set_rate	= &omap1_set_ext_clk_rate,
@@ -599,11 +540,10 @@ static struct clk bclk_16xx = {
 	.init		= &omap1_init_ext_clk,
 };
 
-static struct clk mmc1_ck = {
-	.name		= "mmc1_ck",
+static struct omap1_clk mmc1_ck = {
 	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck.clk,
+	.hw.init	= CLK_HW_INIT("mmc1_ck", "armper_ck", &omap1_clk_full_ops, 0),
 	.rate		= 48000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
@@ -614,32 +554,29 @@ static struct clk mmc1_ck = {
  * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as
  * CONF_MOD_MCBSP3_AUXON ??
  */
-static struct clk mmc2_ck = {
-	.name		= "mmc2_ck",
+static struct omap1_clk mmc2_ck = {
 	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck.clk,
+	.hw.init	= CLK_HW_INIT("mmc2_ck", "armper_ck", &omap1_clk_full_ops, 0),
 	.rate		= 48000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 20,
 };
 
-static struct clk mmc3_ck = {
-	.name		= "mmc3_ck",
+static struct omap1_clk mmc3_ck = {
 	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck.clk,
+	.hw.init	= CLK_HW_INIT("mmc3_ck", "armper_ck", &omap1_clk_full_ops, 0),
 	.rate		= 48000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= SOFT_MMC_DPLL_REQ_SHIFT,
 };
 
-static struct clk virtual_ck_mpu = {
-	.name		= "mpu",
-	.ops		= &clkops_null,
-	.parent		= &arm_ck, /* Is smarter alias for */
+static struct omap1_clk virtual_ck_mpu = {
+	/* Is smarter alias for arm_ck */
+	.hw.init	= CLK_HW_INIT("mpu", "arm_ck", &omap1_clk_rate_ops, 0),
 	.recalc		= &followparent_recalc,
 	.set_rate	= &omap1_select_table_rate,
 	.round_rate	= &omap1_round_to_table_rate,
@@ -647,20 +584,14 @@ static struct clk virtual_ck_mpu = {
 
 /* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
 remains active during MPU idle whenever this is enabled */
-static struct clk i2c_fck = {
-	.name		= "i2c_fck",
-	.ops		= &clkops_null,
+static struct omap1_clk i2c_fck = {
+	.hw.init	= CLK_HW_INIT("i2c_fck", "armxor_ck", &omap1_clk_gate_ops, 0),
 	.flags		= CLOCK_NO_IDLE_PARENT,
-	.parent		= &armxor_ck.clk,
-	.recalc		= &followparent_recalc,
 };
 
-static struct clk i2c_ick = {
-	.name		= "i2c_ick",
-	.ops		= &clkops_null,
+static struct omap1_clk i2c_ick = {
+	.hw.init	= CLK_HW_INIT("i2c_ick", "armper_ck", &omap1_clk_gate_ops, 0),
 	.flags		= CLOCK_NO_IDLE_PARENT,
-	.parent		= &armper_ck.clk,
-	.recalc		= &followparent_recalc,
 };
 
 /*
@@ -669,81 +600,81 @@ static struct clk i2c_ick = {
 
 static struct omap_clk omap_clks[] = {
 	/* non-ULPD clocks */
-	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"ck_ref",	&ck_ref.hw,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"ck_dpll1",	&ck_dpll1.hw,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	/* CK_GEN1 clocks */
-	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk, CK_16XX),
-	CLK(NULL,	"ck_sossi",	&sossi_ck,	CK_16XX),
-	CLK(NULL,	"arm_ck",	&arm_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"armper_ck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap_gpio.0", "ick",	&arm_gpio_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK(NULL,	"armtim_ck",	&armtim_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap_wdt",	"fck",		&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap_wdt",	"ick",		&armper_ck.clk,	CK_16XX),
-	CLK("omap_wdt", "ick",		&dummy_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"arminth_ck",	&arminth_ck1510, CK_1510 | CK_310),
-	CLK(NULL,	"arminth_ck",	&arminth_ck16xx, CK_16XX),
+	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk.hw, CK_16XX),
+	CLK(NULL,	"ck_sossi",	&sossi_ck.hw,	CK_16XX),
+	CLK(NULL,	"arm_ck",	&arm_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"armper_ck",	&armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
+	CLK("omap_gpio.0", "ick",	&arm_gpio_ck.hw, CK_1510 | CK_310),
+	CLK(NULL,	"armxor_ck",	&armxor_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"armtim_ck",	&armtim_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
+	CLK("omap_wdt",	"fck",		&armwdt_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
+	CLK("omap_wdt",	"ick",		&armper_ck.clk.hw, CK_16XX),
+	CLK("omap_wdt", "ick",		&dummy_ck.hw,	CK_1510 | CK_310),
+	CLK(NULL,	"arminth_ck",	&arminth_ck1510.hw, CK_1510 | CK_310),
+	CLK(NULL,	"arminth_ck",	&arminth_ck16xx.hw, CK_16XX),
 	/* CK_GEN2 clocks */
-	CLK(NULL,	"dsp_ck",	&dsp_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dspmmu_ck",	&dspmmu_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dspper_ck",	&dspper_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dspxor_ck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dsptim_ck",	&dsptim_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dsp_ck",	&dsp_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspmmu_ck",	&dspmmu_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspper_ck",	&dspper_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspxor_ck",	&dspxor_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dsptim_ck",	&dsptim_ck.hw,	CK_16XX | CK_1510 | CK_310),
 	/* CK_GEN3 clocks */
-	CLK(NULL,	"tc_ck",	&tc_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK(NULL,	"tipb_ck",	&tipb_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"l3_ocpi_ck",	&l3_ocpi_ck,	CK_16XX | CK_7XX),
-	CLK(NULL,	"tc1_ck",	&tc1_ck,	CK_16XX),
-	CLK(NULL,	"tc2_ck",	&tc2_ck,	CK_16XX),
-	CLK(NULL,	"dma_ck",	&dma_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
-	CLK(NULL,	"api_ck",	&api_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK(NULL,	"lb_ck",	&lb_ck.clk,	CK_1510 | CK_310),
-	CLK(NULL,	"rhea1_ck",	&rhea1_ck,	CK_16XX),
-	CLK(NULL,	"rhea2_ck",	&rhea2_ck,	CK_16XX),
-	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx,	CK_16XX | CK_7XX),
-	CLK(NULL,	"lcd_ck",	&lcd_ck_1510.clk, CK_1510 | CK_310),
+	CLK(NULL,	"tc_ck",	&tc_ck.clk.hw,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"tipb_ck",	&tipb_ck.hw,	CK_1510 | CK_310),
+	CLK(NULL,	"l3_ocpi_ck",	&l3_ocpi_ck.hw,	CK_16XX | CK_7XX),
+	CLK(NULL,	"tc1_ck",	&tc1_ck.hw,	CK_16XX),
+	CLK(NULL,	"tc2_ck",	&tc2_ck.hw,	CK_16XX),
+	CLK(NULL,	"dma_ck",	&dma_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dma_lcdfree_ck", &dma_lcdfree_ck.hw, CK_16XX),
+	CLK(NULL,	"api_ck",	&api_ck.clk.hw,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"lb_ck",	&lb_ck.clk.hw,	CK_1510 | CK_310),
+	CLK(NULL,	"rhea1_ck",	&rhea1_ck.hw,	CK_16XX),
+	CLK(NULL,	"rhea2_ck",	&rhea2_ck.hw,	CK_16XX),
+	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx.hw, CK_16XX | CK_7XX),
+	CLK(NULL,	"lcd_ck",	&lcd_ck_1510.clk.hw, CK_1510 | CK_310),
 	/* ULPD clocks */
-	CLK(NULL,	"uart1_ck",	&uart1_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"uart1_ck",	&uart1_16xx.clk, CK_16XX),
-	CLK(NULL,	"uart1_ck",	&uart1_7xx,	CK_7XX),
-	CLK(NULL,	"uart2_ck",	&uart2_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"uart2_ck",	&uart2_7xx,	CK_7XX),
-	CLK(NULL,	"uart3_ck",	&uart3_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"uart3_ck",	&uart3_16xx.clk, CK_16XX),
-	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510, CK_1510 | CK_310),
-	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx, CK_16XX),
-	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX | CK_7XX),
-	CLK(NULL,	"mclk",		&mclk_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
-	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"bclk",		&bclk_16xx,	CK_16XX),
-	CLK("mmci-omap.0", "fck",	&mmc1_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK("mmci-omap.0", "fck",	&mmc3_ck,	CK_7XX),
-	CLK("mmci-omap.0", "ick",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK("mmci-omap.1", "fck",	&mmc2_ck,	CK_16XX),
-	CLK("mmci-omap.1", "ick",	&armper_ck.clk,	CK_16XX),
+	CLK(NULL,	"uart1_ck",	&uart1_1510.hw,	CK_1510 | CK_310),
+	CLK(NULL,	"uart1_ck",	&uart1_16xx.clk.hw, CK_16XX),
+	CLK(NULL,	"uart1_ck",	&uart1_7xx.hw,	CK_7XX),
+	CLK(NULL,	"uart2_ck",	&uart2_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"uart2_ck",	&uart2_7xx.hw,	CK_7XX),
+	CLK(NULL,	"uart3_ck",	&uart3_1510.hw,	CK_1510 | CK_310),
+	CLK(NULL,	"uart3_ck",	&uart3_16xx.clk.hw, CK_16XX),
+	CLK(NULL,	"usb_clko",	&usb_clko.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510.hw, CK_1510 | CK_310),
+	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx.hw, CK_16XX),
+	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck.hw,	CK_16XX | CK_7XX),
+	CLK(NULL,	"mclk",		&mclk_1510.hw,	CK_1510 | CK_310),
+	CLK(NULL,	"mclk",		&mclk_16xx.hw,	CK_16XX),
+	CLK(NULL,	"bclk",		&bclk_1510.hw,	CK_1510 | CK_310),
+	CLK(NULL,	"bclk",		&bclk_16xx.hw,	CK_16XX),
+	CLK("mmci-omap.0", "fck",	&mmc1_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK("mmci-omap.0", "fck",	&mmc3_ck.hw,	CK_7XX),
+	CLK("mmci-omap.0", "ick",	&armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK("mmci-omap.1", "fck",	&mmc2_ck.hw,	CK_16XX),
+	CLK("mmci-omap.1", "ick",	&armper_ck.clk.hw, CK_16XX),
 	/* Virtual clocks */
-	CLK(NULL,	"mpu",		&virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
-	CLK("omap_i2c.1", "fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK("omap_i2c.1", "ick",	&i2c_ick,	CK_16XX),
-	CLK("omap_i2c.1", "ick",	&dummy_ck,	CK_1510 | CK_310 | CK_7XX),
-	CLK("omap1_spi100k.1", "fck",	&dummy_ck,	CK_7XX),
-	CLK("omap1_spi100k.1", "ick",	&dummy_ck,	CK_7XX),
-	CLK("omap1_spi100k.2", "fck",	&dummy_ck,	CK_7XX),
-	CLK("omap1_spi100k.2", "ick",	&dummy_ck,	CK_7XX),
-	CLK("omap_uwire", "fck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap-mcbsp.1", "ick",	&dspper_ck,	CK_16XX),
-	CLK("omap-mcbsp.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap-mcbsp.2", "ick",	&armper_ck.clk,	CK_16XX),
-	CLK("omap-mcbsp.2", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap-mcbsp.3", "ick",	&dspper_ck,	CK_16XX),
-	CLK("omap-mcbsp.3", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap-mcbsp.1", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap-mcbsp.2", "fck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap-mcbsp.3", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"mpu",		&virtual_ck_mpu.hw, CK_16XX | CK_1510 | CK_310),
+	CLK("omap_i2c.1", "fck",	&i2c_fck.hw,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK("omap_i2c.1", "ick",	&i2c_ick.hw,	CK_16XX),
+	CLK("omap_i2c.1", "ick",	&dummy_ck.hw,	CK_1510 | CK_310 | CK_7XX),
+	CLK("omap1_spi100k.1", "fck",	&dummy_ck.hw,	CK_7XX),
+	CLK("omap1_spi100k.1", "ick",	&dummy_ck.hw,	CK_7XX),
+	CLK("omap1_spi100k.2", "fck",	&dummy_ck.hw,	CK_7XX),
+	CLK("omap1_spi100k.2", "ick",	&dummy_ck.hw,	CK_7XX),
+	CLK("omap_uwire", "fck",	&armxor_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.1", "ick",	&dspper_ck.hw,	CK_16XX),
+	CLK("omap-mcbsp.1", "ick",	&dummy_ck.hw,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.2", "ick",	&armper_ck.clk.hw, CK_16XX),
+	CLK("omap-mcbsp.2", "ick",	&dummy_ck.hw,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.3", "ick",	&dspper_ck.hw,	CK_16XX),
+	CLK("omap-mcbsp.3", "ick",	&dummy_ck.hw,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.1", "fck",	&dspxor_ck.hw,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.2", "fck",	&armper_ck.clk.hw, CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.3", "fck",	&dspxor_ck.hw,	CK_16XX | CK_1510 | CK_310),
 };
 
 /*
@@ -763,15 +694,14 @@ u32 cpu_mask;
 int __init omap1_clk_init(void)
 {
 	struct omap_clk *c;
-	int crystal_type = 0; /* Default 12 MHz */
 	u32 reg;
 
 #ifdef CONFIG_DEBUG_LL
-	/*
-	 * Resets some clocks that may be left on from bootloader,
-	 * but leaves serial clocks on.
-	 */
-	omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+	/* Make sure UART clocks are enabled early */
+	if (cpu_is_omap16xx())
+		omap_writel(omap_readl(MOD_CONF_CTRL_0) |
+			    CONF_MOD_UART1_CLK_MODE_R |
+			    CONF_MOD_UART3_CLK_MODE_R, MOD_CONF_CTRL_0);
 #endif
 
 	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
@@ -783,9 +713,6 @@ int __init omap1_clk_init(void)
 	/* By default all idlect1 clocks are allowed to idle */
 	arm_idlect1_mask = ~0;
 
-	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
-		clk_preinit(c->lk.clk);
-
 	cpu_mask = 0;
 	if (cpu_is_omap1710())
 		cpu_mask |= CK_1710;
@@ -793,32 +720,19 @@ int __init omap1_clk_init(void)
 		cpu_mask |= CK_16XX;
 	if (cpu_is_omap1510())
 		cpu_mask |= CK_1510;
-	if (cpu_is_omap7xx())
-		cpu_mask |= CK_7XX;
 	if (cpu_is_omap310())
 		cpu_mask |= CK_310;
 
-	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
-		if (c->cpu & cpu_mask) {
-			clkdev_add(&c->lk);
-			clk_register(c->lk.clk);
-		}
-
 	/* Pointers to these clocks are needed by code in clock.c */
-	api_ck_p = clk_get(NULL, "api_ck");
-	ck_dpll1_p = clk_get(NULL, "ck_dpll1");
-	ck_ref_p = clk_get(NULL, "ck_ref");
-
-	if (cpu_is_omap7xx())
-		ck_ref.rate = 13000000;
-	if (cpu_is_omap16xx() && crystal_type == 2)
-		ck_ref.rate = 19200000;
+	api_ck_p = &api_ck.clk;
+	ck_dpll1_p = &ck_dpll1;
+	ck_ref_p = &ck_ref;
 
 	pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
 		omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
 		omap_readw(ARM_CKCTL));
 
-	/* We want to be in syncronous scalable mode */
+	/* We want to be in synchronous scalable mode */
 	omap_writew(0x1000, ARM_SYSST);
 
 
@@ -851,15 +765,6 @@ int __init omap1_clk_init(void)
 			}
 		}
 	}
-	propagate_rate(&ck_dpll1);
-	/* Cache rates for clocks connected to ck_ref (not dpll1) */
-	propagate_rate(&ck_ref);
-	omap1_show_rates();
-	if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
-		/* Select slicer output as OMAP input clock */
-		omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
-				OMAP7XX_PCC_UPLD_CTRL);
-	}
 
 	/* Amstrad Delta wants BCLK high when inactive */
 	if (machine_is_ams_delta())
@@ -868,11 +773,7 @@ int __init omap1_clk_init(void)
 				ULPD_CLOCK_CTRL);
 
 	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
-	/* (on 730, bit 13 must not be cleared) */
-	if (cpu_is_omap7xx())
-		omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
-	else
-		omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
+	omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
 
 	/* Put DSP/MPUI into reset until needed */
 	omap_writew(0, ARM_RSTCT1);
@@ -886,16 +787,28 @@ int __init omap1_clk_init(void)
 	 */
 	omap_writew(0x0000, ARM_IDLECT2);	/* Turn LCD clock off also */
 
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable(&armper_ck.clk);
-	clk_enable(&armxor_ck.clk);
-	clk_enable(&armtim_ck.clk); /* This should be done by timer code */
+	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) {
+		if (!(c->cpu & cpu_mask))
+			continue;
+
+		if (c->lk.clk_hw->init) { /* NULL if provider already registered */
+			const struct clk_init_data *init = c->lk.clk_hw->init;
+			const char *name = c->lk.clk_hw->init->name;
+			int err;
+
+			err = clk_hw_register(NULL, c->lk.clk_hw);
+			if (err < 0) {
+				pr_err("failed to register clock \"%s\"! (%d)\n", name, err);
+				/* may be tried again, restore init data */
+				c->lk.clk_hw->init = init;
+				continue;
+			}
+		}
 
-	if (cpu_is_omap15xx())
-		clk_enable(&arm_gpio_ck);
+		clk_hw_register_clkdev(c->lk.clk_hw, c->lk.con_id, c->lk.dev_id);
+	}
+
+	omap1_show_rates();
 
 	return 0;
 }
@@ -907,7 +820,7 @@ void __init omap1_clk_late_init(void)
 	unsigned long rate = ck_dpll1.rate;
 
 	/* Find the highest supported frequency and enable it */
-	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+	if (omap1_select_table_rate(&virtual_ck_mpu, ~0, arm_ck.rate)) {
 		pr_err("System frequencies not set, using default. Check your config.\n");
 		/*
 		 * Reprogramming the DPLL is tricky, it must be done from SRAM.
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index 504b959ba5cf..7a7c3d9eb84a 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -31,39 +31,10 @@
 
 #include <asm/exception.h>
 
-#include <mach/irqs.h>
-
+#include "irqs.h"
 #include "soc.h"
 #include "i2c.h"
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-void omap7xx_map_io(void);
-#else
-static inline void omap7xx_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-void omap1510_fpga_init_irq(void);
-void omap15xx_map_io(void);
-#else
-static inline void omap1510_fpga_init_irq(void)
-{
-}
-static inline void omap15xx_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP16XX
-void omap16xx_map_io(void);
-#else
-static inline void omap16xx_map_io(void)
-{
-}
-#endif
-
 #ifdef CONFIG_OMAP_SERIAL_WAKE
 int omap_serial_wakeup_init(void);
 #else
@@ -73,6 +44,7 @@ static inline int omap_serial_wakeup_init(void)
 }
 #endif
 
+void omap1_map_io(void);
 void omap1_init_early(void);
 void omap1_init_irq(void);
 void __exception_irq_entry omap1_handle_irq(struct pt_regs *regs);
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index eb0f09edb3d1..5304699c7a97 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -14,15 +14,14 @@
 #include <linux/spi/spi.h>
 
 #include <linux/platform_data/omap-wd-timer.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
-#include <mach/mux.h>
-
-#include <mach/omap7xx.h>
-#include <mach/hardware.h>
+#include "tc.h"
+#include "mux.h"
 
+#include "hardware.h"
 #include "common.h"
 #include "clock.h"
 #include "mmc.h"
@@ -63,8 +62,6 @@ static void omap_init_rtc(void)
 static inline void omap_init_rtc(void) {}
 #endif
 
-static inline void omap_init_mbox(void) { }
-
 /*-------------------------------------------------------------------------*/
 
 #if IS_ENABLED(CONFIG_MMC_OMAP)
@@ -73,22 +70,16 @@ static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			int controller_nr)
 {
 	if (controller_nr == 0) {
-		if (cpu_is_omap7xx()) {
-			omap_cfg_reg(MMC_7XX_CMD);
-			omap_cfg_reg(MMC_7XX_CLK);
-			omap_cfg_reg(MMC_7XX_DAT0);
-		} else {
-			omap_cfg_reg(MMC_CMD);
-			omap_cfg_reg(MMC_CLK);
-			omap_cfg_reg(MMC_DAT0);
-		}
+		omap_cfg_reg(MMC_CMD);
+		omap_cfg_reg(MMC_CLK);
+		omap_cfg_reg(MMC_DAT0);
 
 		if (cpu_is_omap1710()) {
 			omap_cfg_reg(M15_1710_MMC_CLKI);
 			omap_cfg_reg(P19_1710_MMC_CMDDIR);
 			omap_cfg_reg(P20_1710_MMC_DATDIR0);
 		}
-		if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) {
+		if (mmc_controller->slots[0].wires == 4) {
 			omap_cfg_reg(MMC_DAT1);
 			/* NOTE: DAT2 can be on W10 (here) or M15 */
 			if (!mmc_controller->slots[0].nomux)
@@ -154,8 +145,6 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base,
 	res[3].name = "tx";
 	res[3].flags = IORESOURCE_DMA;
 
-	if (cpu_is_omap7xx())
-		data->slots[0].features = MMC_OMAP7XX;
 	if (cpu_is_omap15xx())
 		data->slots[0].features = MMC_OMAP15XX;
 	if (cpu_is_omap16xx())
@@ -224,43 +213,6 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 
 /*-------------------------------------------------------------------------*/
 
-/* OMAP7xx SPI support */
-#if IS_ENABLED(CONFIG_SPI_OMAP_100K)
-
-struct platform_device omap_spi1 = {
-	.name           = "omap1_spi100k",
-	.id             = 1,
-};
-
-struct platform_device omap_spi2 = {
-	.name           = "omap1_spi100k",
-	.id             = 2,
-};
-
-static void omap_init_spi100k(void)
-{
-	if (!cpu_is_omap7xx())
-		return;
-
-	omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
-	if (omap_spi1.dev.platform_data)
-		platform_device_register(&omap_spi1);
-
-	omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
-	if (omap_spi2.dev.platform_data)
-		platform_device_register(&omap_spi2);
-}
-
-#else
-static inline void omap_init_spi100k(void)
-{
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-static inline void omap_init_sti(void) {}
-
 /* Numbering for the SPI-capable controllers when used for SPI:
  * spi		= 1
  * uwire	= 2
@@ -356,17 +308,14 @@ static int __init omap1_init_devices(void)
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
 
-	omap_sram_init();
+	omap1_sram_init();
 	omap1_clk_late_init();
 
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
 
-	omap_init_mbox();
 	omap_init_rtc();
-	omap_init_spi100k();
-	omap_init_sti();
 	omap_init_uwire();
 	omap1_init_rng();
 
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 2bf659fb6099..756966cb715f 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -24,7 +24,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
 #include <linux/omap-dma.h>
-#include <mach/tc.h>
+#include "tc.h"
 
 #include "soc.h"
 
@@ -261,22 +261,6 @@ static const struct platform_device_info omap_dma_dev_info = {
 	.num_res = 1,
 };
 
-/* OMAP730, OMAP850 */
-static const struct dma_slave_map omap7xx_sdma_map[] = {
-	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
-	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
-	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(10) },
-	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(11) },
-	{ "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
-	{ "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
-	{ "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
-	{ "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
-	{ "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
-	{ "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
-	{ "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
-	{ "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
-};
-
 /* OMAP1510, OMAP1610*/
 static const struct dma_slave_map omap1xxx_sdma_map[] = {
 	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
@@ -371,13 +355,8 @@ static int __init omap1_system_dma_init(void)
 	p.dma_attr = d;
 	p.errata = configure_dma_errata();
 
-	if (cpu_is_omap7xx()) {
-		p.slave_map = omap7xx_sdma_map;
-		p.slavecnt = ARRAY_SIZE(omap7xx_sdma_map);
-	} else {
-		p.slave_map = omap1xxx_sdma_map;
-		p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map);
-	}
+	p.slave_map = omap1xxx_sdma_map;
+	p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map);
 
 	ret = platform_device_add_data(pdev, &p, sizeof(p));
 	if (ret) {
diff --git a/arch/arm/mach-omap1/fb.c b/arch/arm/mach-omap1/fb.c
index 0e32a959f254..b6e952b03838 100644
--- a/arch/arm/mach-omap1/fb.c
+++ b/arch/arm/mach-omap1/fb.c
@@ -17,9 +17,12 @@
 #include <linux/io.h>
 #include <linux/omapfb.h>
 #include <linux/dma-mapping.h>
+#include <linux/irq.h>
 
 #include <asm/mach/map.h>
 
+#include "irqs.h"
+
 #if IS_ENABLED(CONFIG_FB_OMAP)
 
 static bool omapfb_lcd_configured;
@@ -27,6 +30,19 @@ static struct omapfb_platform_data omapfb_config;
 
 static u64 omap_fb_dma_mask = ~(u32)0;
 
+static struct resource omap_fb_resources[] = {
+	{
+		.name  = "irq",
+		.start = INT_LCD_CTRL,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name  = "irq",
+		.start = INT_SOSSI_MATCH,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
 static struct platform_device omap_fb_device = {
 	.name		= "omapfb",
 	.id		= -1,
@@ -35,7 +51,8 @@ static struct platform_device omap_fb_device = {
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 		.platform_data		= &omapfb_config,
 	},
-	.num_resources = 0,
+	.num_resources = ARRAY_SIZE(omap_fb_resources),
+	.resource = omap_fb_resources,
 };
 
 void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index 40e43ce5329f..0a3ddb3b66eb 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -6,11 +6,12 @@
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
+#include <linux/soc/ti/omap1-io.h>
+
+#include "tc.h"
 
-#include <mach/tc.h>
 #include "flash.h"
 
-#include <mach/hardware.h>
 
 void omap1_set_vpp(struct platform_device *pdev, int enable)
 {
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
deleted file mode 100644
index f03ed523f20f..000000000000
--- a/arch/arm/mach-omap1/fpga.c
+++ /dev/null
@@ -1,187 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/fpga.c
- *
- * Interrupt handler for OMAP-1510 Innovator FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-
-#include "iomap.h"
-#include "common.h"
-#include "fpga.h"
-
-static void fpga_mask_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;
-
-	if (irq < 8)
-		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO)
-			      & ~(1 << irq)), OMAP1510_FPGA_IMR_LO);
-	else if (irq < 16)
-		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI)
-			      & ~(1 << (irq - 8))), OMAP1510_FPGA_IMR_HI);
-	else
-		__raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2)
-			      & ~(1 << (irq - 16))), INNOVATOR_FPGA_IMR2);
-}
-
-
-static inline u32 get_fpga_unmasked_irqs(void)
-{
-	return
-		((__raw_readb(OMAP1510_FPGA_ISR_LO) &
-		  __raw_readb(OMAP1510_FPGA_IMR_LO))) |
-		((__raw_readb(OMAP1510_FPGA_ISR_HI) &
-		  __raw_readb(OMAP1510_FPGA_IMR_HI)) << 8) |
-		((__raw_readb(INNOVATOR_FPGA_ISR2) &
-		  __raw_readb(INNOVATOR_FPGA_IMR2)) << 16);
-}
-
-
-static void fpga_ack_irq(struct irq_data *d)
-{
-	/* Don't need to explicitly ACK FPGA interrupts */
-}
-
-static void fpga_unmask_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;
-
-	if (irq < 8)
-		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO) | (1 << irq)),
-		     OMAP1510_FPGA_IMR_LO);
-	else if (irq < 16)
-		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI)
-			      | (1 << (irq - 8))), OMAP1510_FPGA_IMR_HI);
-	else
-		__raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2)
-			      | (1 << (irq - 16))), INNOVATOR_FPGA_IMR2);
-}
-
-static void fpga_mask_ack_irq(struct irq_data *d)
-{
-	fpga_mask_irq(d);
-	fpga_ack_irq(d);
-}
-
-static void innovator_fpga_IRQ_demux(struct irq_desc *desc)
-{
-	u32 stat;
-	int fpga_irq;
-
-	stat = get_fpga_unmasked_irqs();
-
-	if (!stat)
-		return;
-
-	for (fpga_irq = OMAP_FPGA_IRQ_BASE;
-	     (fpga_irq < OMAP_FPGA_IRQ_END) && stat;
-	     fpga_irq++, stat >>= 1) {
-		if (stat & 1) {
-			generic_handle_irq(fpga_irq);
-		}
-	}
-}
-
-static struct irq_chip omap_fpga_irq_ack = {
-	.name		= "FPGA-ack",
-	.irq_ack	= fpga_mask_ack_irq,
-	.irq_mask	= fpga_mask_irq,
-	.irq_unmask	= fpga_unmask_irq,
-};
-
-
-static struct irq_chip omap_fpga_irq = {
-	.name		= "FPGA",
-	.irq_ack	= fpga_ack_irq,
-	.irq_mask	= fpga_mask_irq,
-	.irq_unmask	= fpga_unmask_irq,
-};
-
-/*
- * All of the FPGA interrupt request inputs except for the touchscreen are
- * edge-sensitive; the touchscreen is level-sensitive.  The edge-sensitive
- * interrupts are acknowledged as a side-effect of reading the interrupt
- * status register from the FPGA.  The edge-sensitive interrupt inputs
- * cause a problem with level interrupt requests, such as Ethernet.  The
- * problem occurs when a level interrupt request is asserted while its
- * interrupt input is masked in the FPGA, which results in a missed
- * interrupt.
- *
- * In an attempt to workaround the problem with missed interrupts, the
- * mask_ack routine for all of the FPGA interrupts has been changed from
- * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt
- * being serviced is left unmasked.  We can do this because the FPGA cascade
- * interrupt is run with all interrupts masked.
- *
- * Limited testing indicates that this workaround appears to be effective
- * for the smc9194 Ethernet driver used on the Innovator.  It should work
- * on other FPGA interrupts as well, but any drivers that explicitly mask
- * interrupts at the interrupt controller via disable_irq/enable_irq
- * could pose a problem.
- */
-void omap1510_fpga_init_irq(void)
-{
-	int i, res;
-
-	__raw_writeb(0, OMAP1510_FPGA_IMR_LO);
-	__raw_writeb(0, OMAP1510_FPGA_IMR_HI);
-	__raw_writeb(0, INNOVATOR_FPGA_IMR2);
-
-	for (i = OMAP_FPGA_IRQ_BASE; i < OMAP_FPGA_IRQ_END; i++) {
-
-		if (i == OMAP1510_INT_FPGA_TS) {
-			/*
-			 * The touchscreen interrupt is level-sensitive, so
-			 * we'll use the regular mask_ack routine for it.
-			 */
-			irq_set_chip(i, &omap_fpga_irq_ack);
-		}
-		else {
-			/*
-			 * All FPGA interrupts except the touchscreen are
-			 * edge-sensitive, so we won't mask them.
-			 */
-			irq_set_chip(i, &omap_fpga_irq);
-		}
-
-		irq_set_handler(i, handle_edge_irq);
-		irq_clear_status_flags(i, IRQ_NOREQUEST);
-	}
-
-	/*
-	 * The FPGA interrupt line is connected to GPIO13. Claim this pin for
-	 * the ARM.
-	 *
-	 * NOTE: For general GPIO/MPUIO access and interrupts, please see
-	 * gpio.[ch]
-	 */
-	res = gpio_request(13, "FPGA irq");
-	if (res) {
-		pr_err("%s failed to get gpio\n", __func__);
-		return;
-	}
-	gpio_direction_input(13);
-	irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
-	irq_set_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
-}
diff --git a/arch/arm/mach-omap1/fpga.h b/arch/arm/mach-omap1/fpga.h
deleted file mode 100644
index 7e7450edacc1..000000000000
--- a/arch/arm/mach-omap1/fpga.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Interrupt handler for OMAP-1510 FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- */
-
-#ifndef __ASM_ARCH_OMAP_FPGA_H
-#define __ASM_ARCH_OMAP_FPGA_H
-
-/*
- * ---------------------------------------------------------------------------
- *  H2/P2 Debug board FPGA
- * ---------------------------------------------------------------------------
- */
-/* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE		0xE8000000		/* VA */
-#define H2P2_DBG_FPGA_SIZE		SZ_4K			/* SIZE */
-#define H2P2_DBG_FPGA_START		0x04000000		/* PA */
-
-#define H2P2_DBG_FPGA_ETHR_START	(H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV		IOMEM(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV		IOMEM(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */
-#define H2P2_DBG_FPGA_GPIO		IOMEM(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS		IOMEM(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS	IOMEM(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS	IOMEM(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET		IOMEM(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line */
-
-/* LEDs definition on debug board (16 LEDs, all physically green) */
-#define H2P2_DBG_FPGA_LED_GREEN		(1 << 15)
-#define H2P2_DBG_FPGA_LED_AMBER		(1 << 14)
-#define H2P2_DBG_FPGA_LED_RED		(1 << 13)
-#define H2P2_DBG_FPGA_LED_BLUE		(1 << 12)
-/*  cpu0 load-meter LEDs */
-#define H2P2_DBG_FPGA_LOAD_METER	(1 << 0)	// A bit of fun on our board ...
-#define H2P2_DBG_FPGA_LOAD_METER_SIZE	11
-#define H2P2_DBG_FPGA_LOAD_METER_MASK	((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
-
-#define H2P2_DBG_FPGA_P2_LED_TIMER		(1 << 0)
-#define H2P2_DBG_FPGA_P2_LED_IDLE		(1 << 1)
-
-#endif
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 3ec08bd5d8a0..61fa26efd865 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * OMAP15xx specific gpio init
  *
@@ -5,21 +6,14 @@
  *
  * Author:
  *	Charulatha V <charu@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <asm/irq.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 #define OMAP1510_GPIO_BASE		0xFFFCE000
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 500cfd416c42..cf052714b3f8 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * OMAP16xx specific gpio init
  *
@@ -5,22 +6,14 @@
  *
  * Author:
  *	Charulatha V <charu@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
-#include <mach/irqs.h>
-
+#include "hardware.h"
+#include "irqs.h"
 #include "soc.h"
 
 #define OMAP1610_GPIO1_BASE		0xfffbe400
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
deleted file mode 100644
index aeb81c18ffcc..000000000000
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * OMAP7xx specific gpio init
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
- *
- * Author:
- *	Charulatha V <charu@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include <mach/irqs.h>
-
-#include "soc.h"
-
-#define OMAP7XX_GPIO1_BASE		0xfffbc000
-#define OMAP7XX_GPIO2_BASE		0xfffbc800
-#define OMAP7XX_GPIO3_BASE		0xfffbd000
-#define OMAP7XX_GPIO4_BASE		0xfffbd800
-#define OMAP7XX_GPIO5_BASE		0xfffbe000
-#define OMAP7XX_GPIO6_BASE		0xfffbe800
-#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
-
-/* mpu gpio */
-static struct resource omap7xx_mpu_gpio_resources[] = {
-	{
-		.start	= OMAP1_MPUIO_VBASE,
-		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_MPUIO,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
-	.revision	= USHRT_MAX,
-	.direction	= OMAP_MPUIO_IO_CNTL / 2,
-	.datain		= OMAP_MPUIO_INPUT_LATCH / 2,
-	.dataout	= OMAP_MPUIO_OUTPUT / 2,
-	.irqstatus	= OMAP_MPUIO_GPIO_INT / 2,
-	.irqenable	= OMAP_MPUIO_GPIO_MASKIT / 2,
-	.irqenable_inv	= true,
-	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE >> 1,
-};
-
-static struct omap_gpio_platform_data omap7xx_mpu_gpio_config = {
-	.is_mpuio		= true,
-	.bank_width		= 16,
-	.bank_stride		= 2,
-	.regs                   = &omap7xx_mpuio_regs,
-};
-
-static struct platform_device omap7xx_mpu_gpio = {
-	.name           = "omap_gpio",
-	.id             = 0,
-	.dev            = {
-		.platform_data = &omap7xx_mpu_gpio_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_mpu_gpio_resources),
-	.resource = omap7xx_mpu_gpio_resources,
-};
-
-/* gpio1 */
-static struct resource omap7xx_gpio1_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO1_BASE,
-		.end	= OMAP7XX_GPIO1_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
-	.revision	= USHRT_MAX,
-	.direction	= OMAP7XX_GPIO_DIR_CONTROL,
-	.datain		= OMAP7XX_GPIO_DATA_INPUT,
-	.dataout	= OMAP7XX_GPIO_DATA_OUTPUT,
-	.irqstatus	= OMAP7XX_GPIO_INT_STATUS,
-	.irqenable	= OMAP7XX_GPIO_INT_MASK,
-	.irqenable_inv	= true,
-	.irqctrl	= OMAP7XX_GPIO_INT_CONTROL,
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio1_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio1 = {
-	.name           = "omap_gpio",
-	.id             = 1,
-	.dev            = {
-		.platform_data = &omap7xx_gpio1_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio1_resources),
-	.resource = omap7xx_gpio1_resources,
-};
-
-/* gpio2 */
-static struct resource omap7xx_gpio2_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO2_BASE,
-		.end	= OMAP7XX_GPIO2_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio2_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio2 = {
-	.name           = "omap_gpio",
-	.id             = 2,
-	.dev            = {
-		.platform_data = &omap7xx_gpio2_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio2_resources),
-	.resource = omap7xx_gpio2_resources,
-};
-
-/* gpio3 */
-static struct resource omap7xx_gpio3_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO3_BASE,
-		.end	= OMAP7XX_GPIO3_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio3_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio3 = {
-	.name           = "omap_gpio",
-	.id             = 3,
-	.dev            = {
-		.platform_data = &omap7xx_gpio3_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio3_resources),
-	.resource = omap7xx_gpio3_resources,
-};
-
-/* gpio4 */
-static struct resource omap7xx_gpio4_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO4_BASE,
-		.end	= OMAP7XX_GPIO4_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK4,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio4_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio4 = {
-	.name           = "omap_gpio",
-	.id             = 4,
-	.dev            = {
-		.platform_data = &omap7xx_gpio4_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio4_resources),
-	.resource = omap7xx_gpio4_resources,
-};
-
-/* gpio5 */
-static struct resource omap7xx_gpio5_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO5_BASE,
-		.end	= OMAP7XX_GPIO5_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK5,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio5_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio5 = {
-	.name           = "omap_gpio",
-	.id             = 5,
-	.dev            = {
-		.platform_data = &omap7xx_gpio5_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio5_resources),
-	.resource = omap7xx_gpio5_resources,
-};
-
-/* gpio6 */
-static struct resource omap7xx_gpio6_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO6_BASE,
-		.end	= OMAP7XX_GPIO6_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK6,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio6_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio6 = {
-	.name           = "omap_gpio",
-	.id             = 6,
-	.dev            = {
-		.platform_data = &omap7xx_gpio6_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio6_resources),
-	.resource = omap7xx_gpio6_resources,
-};
-
-static struct platform_device *omap7xx_gpio_dev[] __initdata = {
-	&omap7xx_mpu_gpio,
-	&omap7xx_gpio1,
-	&omap7xx_gpio2,
-	&omap7xx_gpio3,
-	&omap7xx_gpio4,
-	&omap7xx_gpio5,
-	&omap7xx_gpio6,
-};
-
-/*
- * omap7xx_gpio_init needs to be done before
- * machine_init functions access gpio APIs.
- * Hence omap7xx_gpio_init is a postcore_initcall.
- */
-static int __init omap7xx_gpio_init(void)
-{
-	int i;
-
-	if (!cpu_is_omap7xx())
-		return -EINVAL;
-
-	for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++)
-		platform_device_register(omap7xx_gpio_dev[i]);
-
-	return 0;
-}
-postcore_initcall(omap7xx_gpio_init);
diff --git a/arch/arm/mach-omap1/hardware.h b/arch/arm/mach-omap1/hardware.h
new file mode 100644
index 000000000000..0aa571c9e0eb
--- /dev/null
+++ b/arch/arm/mach-omap1/hardware.h
@@ -0,0 +1,235 @@
+/*
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ *	 file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+
+#include <linux/sizes.h>
+#include <linux/soc/ti/omap1-io.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <linux/soc/ti/omap1-soc.h>
+
+#include "tc.h"
+
+/* Almost all documentation for chip and board memory maps assumes
+ * BM is clear.  Most devel boards have a switch to control booting
+ * from NOR flash (using external chipselect 3) rather than mask ROM,
+ * which uses BM to interchange the physical CS0 and CS3 addresses.
+ */
+static inline u32 omap_cs0m_phys(void)
+{
+	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+			?  OMAP_CS3_PHYS : 0;
+}
+
+static inline u32 omap_cs3_phys(void)
+{
+	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+			? 0 : OMAP_CS3_PHYS;
+}
+
+#endif	/* ifndef __ASSEMBLER__ */
+
+#define OMAP1_IO_OFFSET		0x00f00000	/* Virtual IO = 0xff0b0000 */
+#define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
+
+#include "serial.h"
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ *	 files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
+#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
+#define MPU_TIMER_FREE		(1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
+#define MPU_TIMER_AR		(1 << 1)
+#define MPU_TIMER_ST		(1 << 0)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
+#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE		0xfffecb00
+#define OMAP_IH2_BASE		0xfffe0000
+#define OMAP_IH2_0_BASE		(0xfffe0000)
+#define OMAP_IH2_1_BASE		(0xfffe0100)
+#define OMAP_IH2_2_BASE		(0xfffe0200)
+#define OMAP_IH2_3_BASE		(0xfffe0300)
+
+#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
+
+#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
+#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
+#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
+#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
+#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
+#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
+#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
+
+#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
+#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
+#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
+#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
+#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
+#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
+#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
+
+#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
+#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
+#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
+#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
+#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
+#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
+#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
+
+#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
+#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
+#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
+#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
+#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
+#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
+#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET	0x00
+#define IRQ_MIR_REG_OFFSET	0x04
+#define IRQ_SIR_IRQ_REG_OFFSET	0x10
+#define IRQ_SIR_FIQ_REG_OFFSET	0x14
+#define IRQ_CONTROL_REG_OFFSET	0x18
+#define IRQ_ISR_REG_OFFSET	0x9c
+#define IRQ_ILR0_REG_OFFSET	0x1c
+#define IRQ_GMR_REG_OFFSET	0xa0
+
+#endif
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE	0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE			(0xfffec900)
+#define MPUI_CTRL			(MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE			0xfffbd000
+#define OMAP_LPG2_BASE			0xfffbd800
+#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * DSP
+ * ---------------------------------------------------------------------------
+ */
+
+#define OMAP1_DSP_BASE		0xE0000000
+#define OMAP1_DSP_SIZE		0x28000
+#define OMAP1_DSP_START		0xE0000000
+
+#define OMAP1_DSPREG_BASE	0xE1000000
+#define OMAP1_DSPREG_SIZE	SZ_128K
+#define OMAP1_DSPREG_START	0xE1000000
+
+#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 5e6d81b1624c..94d3e7883e02 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -7,8 +7,10 @@
 
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-omap.h>
-#include <mach/mux.h>
+
+#include "mux.h"
 #include "soc.h"
+#include "i2c.h"
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
@@ -23,13 +25,8 @@ static struct platform_device omap_i2c_devices[1] = {
 
 static void __init omap1_i2c_mux_pins(int bus_id)
 {
-	if (cpu_is_omap7xx()) {
-		omap_cfg_reg(I2C_7XX_SDA);
-		omap_cfg_reg(I2C_7XX_SCL);
-	} else {
-		omap_cfg_reg(I2C_SDA);
-		omap_cfg_reg(I2C_SCL);
-	}
+	omap_cfg_reg(I2C_SDA);
+	omap_cfg_reg(I2C_SCL);
 }
 
 int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
@@ -66,10 +63,7 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
 
 	/* how the cpu bus is wired up differs for 7xx only */
 
-	if (cpu_is_omap7xx())
-		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
-	else
-		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
+	pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
 
 	pdev->dev.platform_data = pdata;
 
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 91556e374152..c3bb1b71fdf3 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -12,12 +12,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/soc/ti/omap1-io.h>
 #include <asm/system_info.h>
 
 #include "soc.h"
-
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "common.h"
 
 #define OMAP_DIE_ID_0		0xfffe1800
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
deleted file mode 100644
index e7c8ac7d83e3..000000000000
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/hardware.h
- *
- * Hardware definitions for TI OMAP processors and boards
- *
- * NOTE: Please put device driver specific defines into a separate header
- *	 file for each driver.
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- *
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- *                          and Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_HARDWARE_H
-#define __ASM_ARCH_OMAP_HARDWARE_H
-
-#include <linux/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#include <mach/soc.h>
-
-/*
- * NOTE: Please use ioremap + __raw_read/write where possible instead of these
- */
-extern u8 omap_readb(u32 pa);
-extern u16 omap_readw(u32 pa);
-extern u32 omap_readl(u32 pa);
-extern void omap_writeb(u8 v, u32 pa);
-extern void omap_writew(u16 v, u32 pa);
-extern void omap_writel(u32 v, u32 pa);
-
-#include <mach/tc.h>
-
-/* Almost all documentation for chip and board memory maps assumes
- * BM is clear.  Most devel boards have a switch to control booting
- * from NOR flash (using external chipselect 3) rather than mask ROM,
- * which uses BM to interchange the physical CS0 and CS3 addresses.
- */
-static inline u32 omap_cs0m_phys(void)
-{
-	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
-			?  OMAP_CS3_PHYS : 0;
-}
-
-static inline u32 omap_cs3_phys(void)
-{
-	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
-			? 0 : OMAP_CS3_PHYS;
-}
-
-#endif	/* ifndef __ASSEMBLER__ */
-
-#define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
-#define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
-
-#include <mach/serial.h>
-
-/*
- * ---------------------------------------------------------------------------
- * Common definitions for all OMAP processors
- * NOTE: Put all processor or board specific parts to the special header
- *	 files.
- * ---------------------------------------------------------------------------
- */
-
-/*
- * ----------------------------------------------------------------------------
- * Timers
- * ----------------------------------------------------------------------------
- */
-#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
-#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
-#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
-#define MPU_TIMER_FREE		(1 << 6)
-#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
-#define MPU_TIMER_AR		(1 << 1)
-#define MPU_TIMER_ST		(1 << 0)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE		(0xfffece00)
-#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
-
-#define CK_RATEF		1
-#define CK_IDLEF		2
-#define CK_ENABLEF		4
-#define CK_SELECTF		8
-#define SETARM_IDLE_SHIFT
-
-/* DPLL control registers */
-#define DPLL_CTL		(0xfffecf00)
-
-/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
-#define DSP_CONFIG_REG_BASE     IOMEM(0xe1008000)
-#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
-#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
-#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
-#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
-
-/*
- * ---------------------------------------------------------------------------
- * UPLD
- * ---------------------------------------------------------------------------
- */
-#define ULPD_REG_BASE		(0xfffe0800)
-#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
-#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
-#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
-#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
-#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
-#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
-#	define SOFT_UDC_REQ		(1 << 4)
-#	define SOFT_USB_CLK_REQ		(1 << 3)
-#	define SOFT_DPLL_REQ		(1 << 0)
-#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
-#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
-#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
-#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
-#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
-#	define DIS_MMC2_DPLL_REQ	(1 << 11)
-#	define DIS_MMC1_DPLL_REQ	(1 << 10)
-#	define DIS_UART3_DPLL_REQ	(1 << 9)
-#	define DIS_UART2_DPLL_REQ	(1 << 8)
-#	define DIS_UART1_DPLL_REQ	(1 << 7)
-#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
-#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
-#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* Watchdog timer within the OMAP3.2 gigacell */
-#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
-#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
-#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#ifdef CONFIG_ARCH_OMAP1
-
-/*
- * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
- * or something similar.. -- PFM.
- */
-
-#define OMAP_IH1_BASE		0xfffecb00
-#define OMAP_IH2_BASE		0xfffe0000
-
-#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
-#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
-#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
-#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
-#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
-#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
-#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
-
-#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
-#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
-#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
-#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
-#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
-#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
-#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
-
-#define IRQ_ITR_REG_OFFSET	0x00
-#define IRQ_MIR_REG_OFFSET	0x04
-#define IRQ_SIR_IRQ_REG_OFFSET	0x10
-#define IRQ_SIR_FIQ_REG_OFFSET	0x14
-#define IRQ_CONTROL_REG_OFFSET	0x18
-#define IRQ_ISR_REG_OFFSET	0x9c
-#define IRQ_ILR0_REG_OFFSET	0x1c
-#define IRQ_GMR_REG_OFFSET	0xa0
-
-#endif
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define MOD_CONF_CTRL_0		0xfffe1080
-#define MOD_CONF_CTRL_1		0xfffe1110
-
-/*
- * ----------------------------------------------------------------------------
- * Pin multiplexing registers
- * ----------------------------------------------------------------------------
- */
-#define FUNC_MUX_CTRL_0		0xfffe1000
-#define FUNC_MUX_CTRL_1		0xfffe1004
-#define FUNC_MUX_CTRL_2		0xfffe1008
-#define COMP_MODE_CTRL_0	0xfffe100c
-#define FUNC_MUX_CTRL_3		0xfffe1010
-#define FUNC_MUX_CTRL_4		0xfffe1014
-#define FUNC_MUX_CTRL_5		0xfffe1018
-#define FUNC_MUX_CTRL_6		0xfffe101C
-#define FUNC_MUX_CTRL_7		0xfffe1020
-#define FUNC_MUX_CTRL_8		0xfffe1024
-#define FUNC_MUX_CTRL_9		0xfffe1028
-#define FUNC_MUX_CTRL_A		0xfffe102C
-#define FUNC_MUX_CTRL_B		0xfffe1030
-#define FUNC_MUX_CTRL_C		0xfffe1034
-#define FUNC_MUX_CTRL_D		0xfffe1038
-#define PULL_DWN_CTRL_0		0xfffe1040
-#define PULL_DWN_CTRL_1		0xfffe1044
-#define PULL_DWN_CTRL_2		0xfffe1048
-#define PULL_DWN_CTRL_3		0xfffe104c
-#define PULL_DWN_CTRL_4		0xfffe10ac
-
-/* OMAP-1610 specific multiplexing registers */
-#define FUNC_MUX_CTRL_E		0xfffe1090
-#define FUNC_MUX_CTRL_F		0xfffe1094
-#define FUNC_MUX_CTRL_10	0xfffe1098
-#define FUNC_MUX_CTRL_11	0xfffe109c
-#define FUNC_MUX_CTRL_12	0xfffe10a0
-#define PU_PD_SEL_0		0xfffe10b4
-#define PU_PD_SEL_1		0xfffe10b8
-#define PU_PD_SEL_2		0xfffe10bc
-#define PU_PD_SEL_3		0xfffe10c0
-#define PU_PD_SEL_4		0xfffe10c4
-
-/* Timer32K for 1610 and 1710*/
-#define OMAP_TIMER32K_BASE	0xFFFBC400
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
-#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
-#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
-#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
-
-/*
- * ----------------------------------------------------------------------------
- * MPUI interface
- * ----------------------------------------------------------------------------
- */
-#define MPUI_BASE			(0xfffec900)
-#define MPUI_CTRL			(MPUI_BASE + 0x0)
-#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
-#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
-#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
-#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
-#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
-#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
-#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
-
-/*
- * ----------------------------------------------------------------------------
- * LED Pulse Generator
- * ----------------------------------------------------------------------------
- */
-#define OMAP_LPG1_BASE			0xfffbd000
-#define OMAP_LPG2_BASE			0xfffbd800
-#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
-#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
-#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
-#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
-
-/*
- * ----------------------------------------------------------------------------
- * Pulse-Width Light
- * ----------------------------------------------------------------------------
- */
-#define OMAP_PWL_BASE			0xfffb5800
-#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
-#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
-
-/*
- * ---------------------------------------------------------------------------
- * Processor specific defines
- * ---------------------------------------------------------------------------
- */
-
-#include "omap7xx.h"
-#include "omap1510.h"
-#include "omap16xx.h"
-
-#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h
deleted file mode 100644
index ce4f8005b26f..000000000000
--- a/arch/arm/mach-omap1/include/mach/io.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/io.h
- *
- * IO definitions for TI OMAP processors and boards
- *
- * Copied from arch/arm/mach-sa1100/include/mach/io.h
- * Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Modifications:
- *  06-12-1997	RMK	Created.
- *  07-04-1999	RMK	Major cleanup
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)		__typesafe_io(a)
-
-#endif
diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h
deleted file mode 100644
index 30bf007700cf..000000000000
--- a/arch/arm/mach-omap1/include/mach/irqs.h
+++ /dev/null
@@ -1,251 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- *  arch/arm/plat-omap/include/mach/irqs.h
- *
- *  Copyright (C) Greg Lonnon 2001
- *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
- *	 are different.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
-#define __ASM_ARCH_OMAP15XX_IRQS_H
-
-/*
- * IRQ numbers for interrupt handler 1
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- *
- */
-#define INT_CAMERA		(NR_IRQS_LEGACY + 1)
-#define INT_FIQ			(NR_IRQS_LEGACY + 3)
-#define INT_RTDX		(NR_IRQS_LEGACY + 6)
-#define INT_DSP_MMU_ABORT	(NR_IRQS_LEGACY + 7)
-#define INT_HOST		(NR_IRQS_LEGACY + 8)
-#define INT_ABORT		(NR_IRQS_LEGACY + 9)
-#define INT_BRIDGE_PRIV		(NR_IRQS_LEGACY + 13)
-#define INT_GPIO_BANK1		(NR_IRQS_LEGACY + 14)
-#define INT_UART3		(NR_IRQS_LEGACY + 15)
-#define INT_TIMER3		(NR_IRQS_LEGACY + 16)
-#define INT_DMA_CH0_6		(NR_IRQS_LEGACY + 19)
-#define INT_DMA_CH1_7		(NR_IRQS_LEGACY + 20)
-#define INT_DMA_CH2_8		(NR_IRQS_LEGACY + 21)
-#define INT_DMA_CH3		(NR_IRQS_LEGACY + 22)
-#define INT_DMA_CH4		(NR_IRQS_LEGACY + 23)
-#define INT_DMA_CH5		(NR_IRQS_LEGACY + 24)
-#define INT_TIMER1		(NR_IRQS_LEGACY + 26)
-#define INT_WD_TIMER		(NR_IRQS_LEGACY + 27)
-#define INT_BRIDGE_PUB		(NR_IRQS_LEGACY + 28)
-#define INT_TIMER2		(NR_IRQS_LEGACY + 30)
-#define INT_LCD_CTRL		(NR_IRQS_LEGACY + 31)
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1510_IH2_IRQ	(NR_IRQS_LEGACY + 0)
-#define INT_1510_RES2		(NR_IRQS_LEGACY + 2)
-#define INT_1510_SPI_TX		(NR_IRQS_LEGACY + 4)
-#define INT_1510_SPI_RX		(NR_IRQS_LEGACY + 5)
-#define INT_1510_DSP_MAILBOX1	(NR_IRQS_LEGACY + 10)
-#define INT_1510_DSP_MAILBOX2	(NR_IRQS_LEGACY + 11)
-#define INT_1510_RES12		(NR_IRQS_LEGACY + 12)
-#define INT_1510_LB_MMU		(NR_IRQS_LEGACY + 17)
-#define INT_1510_RES18		(NR_IRQS_LEGACY + 18)
-#define INT_1510_LOCAL_BUS	(NR_IRQS_LEGACY + 29)
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1610_IH2_IRQ	INT_1510_IH2_IRQ
-#define INT_1610_IH2_FIQ	(NR_IRQS_LEGACY + 2)
-#define INT_1610_McBSP2_TX	(NR_IRQS_LEGACY + 4)
-#define INT_1610_McBSP2_RX	(NR_IRQS_LEGACY + 5)
-#define INT_1610_DSP_MAILBOX1	(NR_IRQS_LEGACY + 10)
-#define INT_1610_DSP_MAILBOX2	(NR_IRQS_LEGACY + 11)
-#define INT_1610_LCD_LINE	(NR_IRQS_LEGACY + 12)
-#define INT_1610_GPTIMER1	(NR_IRQS_LEGACY + 17)
-#define INT_1610_GPTIMER2	(NR_IRQS_LEGACY + 18)
-#define INT_1610_SSR_FIFO_0	(NR_IRQS_LEGACY + 29)
-
-/*
- * OMAP-7xx specific IRQ numbers for interrupt handler 1
- */
-#define INT_7XX_IH2_FIQ		(NR_IRQS_LEGACY + 0)
-#define INT_7XX_IH2_IRQ		(NR_IRQS_LEGACY + 1)
-#define INT_7XX_USB_NON_ISO	(NR_IRQS_LEGACY + 2)
-#define INT_7XX_USB_ISO		(NR_IRQS_LEGACY + 3)
-#define INT_7XX_ICR		(NR_IRQS_LEGACY + 4)
-#define INT_7XX_EAC		(NR_IRQS_LEGACY + 5)
-#define INT_7XX_GPIO_BANK1	(NR_IRQS_LEGACY + 6)
-#define INT_7XX_GPIO_BANK2	(NR_IRQS_LEGACY + 7)
-#define INT_7XX_GPIO_BANK3	(NR_IRQS_LEGACY + 8)
-#define INT_7XX_McBSP2TX	(NR_IRQS_LEGACY + 10)
-#define INT_7XX_McBSP2RX	(NR_IRQS_LEGACY + 11)
-#define INT_7XX_McBSP2RX_OVF	(NR_IRQS_LEGACY + 12)
-#define INT_7XX_LCD_LINE	(NR_IRQS_LEGACY + 14)
-#define INT_7XX_GSM_PROTECT	(NR_IRQS_LEGACY + 15)
-#define INT_7XX_TIMER3		(NR_IRQS_LEGACY + 16)
-#define INT_7XX_GPIO_BANK5	(NR_IRQS_LEGACY + 17)
-#define INT_7XX_GPIO_BANK6	(NR_IRQS_LEGACY + 18)
-#define INT_7XX_SPGIO_WR	(NR_IRQS_LEGACY + 29)
-
-/*
- * IRQ numbers for interrupt handler 2
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- */
-#define IH2_BASE		(NR_IRQS_LEGACY + 32)
-
-#define INT_KEYBOARD		(1 + IH2_BASE)
-#define INT_uWireTX		(2 + IH2_BASE)
-#define INT_uWireRX		(3 + IH2_BASE)
-#define INT_I2C			(4 + IH2_BASE)
-#define INT_MPUIO		(5 + IH2_BASE)
-#define INT_USB_HHC_1		(6 + IH2_BASE)
-#define INT_McBSP3TX		(10 + IH2_BASE)
-#define INT_McBSP3RX		(11 + IH2_BASE)
-#define INT_McBSP1TX		(12 + IH2_BASE)
-#define INT_McBSP1RX		(13 + IH2_BASE)
-#define INT_UART1		(14 + IH2_BASE)
-#define INT_UART2		(15 + IH2_BASE)
-#define INT_BT_MCSI1TX		(16 + IH2_BASE)
-#define INT_BT_MCSI1RX		(17 + IH2_BASE)
-#define INT_SOSSI_MATCH		(19 + IH2_BASE)
-#define INT_USB_W2FC		(20 + IH2_BASE)
-#define INT_1WIRE		(21 + IH2_BASE)
-#define INT_OS_TIMER		(22 + IH2_BASE)
-#define INT_MMC			(23 + IH2_BASE)
-#define INT_GAUGE_32K		(24 + IH2_BASE)
-#define INT_RTC_TIMER		(25 + IH2_BASE)
-#define INT_RTC_ALARM		(26 + IH2_BASE)
-#define INT_MEM_STICK		(27 + IH2_BASE)
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1510_DSP_MMU	(28 + IH2_BASE)
-#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1610_FAC		(0 + IH2_BASE)
-#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
-#define INT_1610_USB_OTG	(8 + IH2_BASE)
-#define INT_1610_SoSSI		(9 + IH2_BASE)
-#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
-#define INT_1610_DSP_MMU	(28 + IH2_BASE)
-#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
-#define INT_1610_STI		(32 + IH2_BASE)
-#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
-#define INT_1610_GPTIMER3	(34 + IH2_BASE)
-#define INT_1610_GPTIMER4	(35 + IH2_BASE)
-#define INT_1610_GPTIMER5	(36 + IH2_BASE)
-#define INT_1610_GPTIMER6	(37 + IH2_BASE)
-#define INT_1610_GPTIMER7	(38 + IH2_BASE)
-#define INT_1610_GPTIMER8	(39 + IH2_BASE)
-#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
-#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
-#define INT_1610_MMC2		(42 + IH2_BASE)
-#define INT_1610_CF		(43 + IH2_BASE)
-#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
-#define INT_1610_SPI		(49 + IH2_BASE)
-#define INT_1610_DMA_CH6	(53 + IH2_BASE)
-#define INT_1610_DMA_CH7	(54 + IH2_BASE)
-#define INT_1610_DMA_CH8	(55 + IH2_BASE)
-#define INT_1610_DMA_CH9	(56 + IH2_BASE)
-#define INT_1610_DMA_CH10	(57 + IH2_BASE)
-#define INT_1610_DMA_CH11	(58 + IH2_BASE)
-#define INT_1610_DMA_CH12	(59 + IH2_BASE)
-#define INT_1610_DMA_CH13	(60 + IH2_BASE)
-#define INT_1610_DMA_CH14	(61 + IH2_BASE)
-#define INT_1610_DMA_CH15	(62 + IH2_BASE)
-#define INT_1610_NAND		(63 + IH2_BASE)
-#define INT_1610_SHA1MD5	(91 + IH2_BASE)
-
-/*
- * OMAP-7xx specific IRQ numbers for interrupt handler 2
- */
-#define INT_7XX_HW_ERRORS	(0 + IH2_BASE)
-#define INT_7XX_NFIQ_PWR_FAIL	(1 + IH2_BASE)
-#define INT_7XX_CFCD		(2 + IH2_BASE)
-#define INT_7XX_CFIREQ		(3 + IH2_BASE)
-#define INT_7XX_I2C		(4 + IH2_BASE)
-#define INT_7XX_PCC		(5 + IH2_BASE)
-#define INT_7XX_MPU_EXT_NIRQ	(6 + IH2_BASE)
-#define INT_7XX_SPI_100K_1	(7 + IH2_BASE)
-#define INT_7XX_SYREN_SPI	(8 + IH2_BASE)
-#define INT_7XX_VLYNQ		(9 + IH2_BASE)
-#define INT_7XX_GPIO_BANK4	(10 + IH2_BASE)
-#define INT_7XX_McBSP1TX	(11 + IH2_BASE)
-#define INT_7XX_McBSP1RX	(12 + IH2_BASE)
-#define INT_7XX_McBSP1RX_OF	(13 + IH2_BASE)
-#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_7XX_UART_MODEM_1	(15 + IH2_BASE)
-#define INT_7XX_MCSI		(16 + IH2_BASE)
-#define INT_7XX_uWireTX		(17 + IH2_BASE)
-#define INT_7XX_uWireRX		(18 + IH2_BASE)
-#define INT_7XX_SMC_CD		(19 + IH2_BASE)
-#define INT_7XX_SMC_IREQ	(20 + IH2_BASE)
-#define INT_7XX_HDQ_1WIRE	(21 + IH2_BASE)
-#define INT_7XX_TIMER32K	(22 + IH2_BASE)
-#define INT_7XX_MMC_SDIO	(23 + IH2_BASE)
-#define INT_7XX_UPLD		(24 + IH2_BASE)
-#define INT_7XX_USB_HHC_1	(27 + IH2_BASE)
-#define INT_7XX_USB_HHC_2	(28 + IH2_BASE)
-#define INT_7XX_USB_GENI	(29 + IH2_BASE)
-#define INT_7XX_USB_OTG		(30 + IH2_BASE)
-#define INT_7XX_CAMERA_IF	(31 + IH2_BASE)
-#define INT_7XX_RNG		(32 + IH2_BASE)
-#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_7XX_DBB_RF_EN	(34 + IH2_BASE)
-#define INT_7XX_MPUIO_KEYPAD	(35 + IH2_BASE)
-#define INT_7XX_SHA1_MD5	(36 + IH2_BASE)
-#define INT_7XX_SPI_100K_2	(37 + IH2_BASE)
-#define INT_7XX_RNG_IDLE	(38 + IH2_BASE)
-#define INT_7XX_MPUIO		(39 + IH2_BASE)
-#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
-#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_7XX_LLPC_OE_RISING	(42 + IH2_BASE)
-#define INT_7XX_LLPC_VSYNC	(43 + IH2_BASE)
-#define INT_7XX_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_7XX_DMA_CH6		(53 + IH2_BASE)
-#define INT_7XX_DMA_CH7		(54 + IH2_BASE)
-#define INT_7XX_DMA_CH8		(55 + IH2_BASE)
-#define INT_7XX_DMA_CH9		(56 + IH2_BASE)
-#define INT_7XX_DMA_CH10	(57 + IH2_BASE)
-#define INT_7XX_DMA_CH11	(58 + IH2_BASE)
-#define INT_7XX_DMA_CH12	(59 + IH2_BASE)
-#define INT_7XX_DMA_CH13	(60 + IH2_BASE)
-#define INT_7XX_DMA_CH14	(61 + IH2_BASE)
-#define INT_7XX_DMA_CH15	(62 + IH2_BASE)
-#define INT_7XX_NAND		(63 + IH2_BASE)
-
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
- * 16 MPUIO lines */
-#define OMAP_MAX_GPIO_LINES	192
-#define IH_GPIO_BASE		(128 + IH2_BASE)
-#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
-#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
-
-/* External FPGA handles interrupts on Innovator boards */
-#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
-#ifdef	CONFIG_MACH_OMAP_INNOVATOR
-#define OMAP_FPGA_NR_IRQS	24
-#else
-#define OMAP_FPGA_NR_IRQS	0
-#endif
-#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
-
-#define OMAP_IRQ_BIT(irq)	(1 << ((irq - NR_IRQS_LEGACY) % 32))
-
-#ifdef CONFIG_FIQ
-#define FIQ_START		1024
-#endif
-
-#endif
diff --git a/arch/arm/mach-omap1/include/mach/lcd_dma.h b/arch/arm/mach-omap1/include/mach/lcd_dma.h
deleted file mode 100644
index 1a3c0cf17899..000000000000
--- a/arch/arm/mach-omap1/include/mach/lcd_dma.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- *  arch/arm/mach-omap1/include/mach/lcd_dma.h
- *
- * Extracted from arch/arm/plat-omap/include/plat/dma.h
- *  Copyright (C) 2003 Nokia Corporation
- *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
- */
-#ifndef __MACH_OMAP1_LCD_DMA_H__
-#define __MACH_OMAP1_LCD_DMA_H__
-
-/* Hardware registers for LCD DMA */
-#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
-#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
-#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
-#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
-#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
-#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
-
-#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
-#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
-#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
-#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
-#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
-#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
-#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
-#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
-#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
-#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
-#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
-#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
-#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
-#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
-#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
-#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
-
-/* LCD DMA block numbers */
-enum {
-	OMAP_LCD_DMA_B1_TOP,
-	OMAP_LCD_DMA_B1_BOTTOM,
-	OMAP_LCD_DMA_B2_TOP,
-	OMAP_LCD_DMA_B2_BOTTOM
-};
-
-/* LCD DMA functions */
-extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
-				void *data);
-extern void omap_free_lcd_dma(void);
-extern void omap_setup_lcd_dma(void);
-extern void omap_enable_lcd_dma(void);
-extern void omap_stop_lcd_dma(void);
-extern void omap_set_lcd_dma_ext_controller(int external);
-extern void omap_set_lcd_dma_single_transfer(int single);
-extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
-				int data_type);
-extern void omap_set_lcd_dma_b1_rotation(int rotate);
-extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
-extern void omap_set_lcd_dma_b1_mirror(int mirror);
-extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
-
-extern int omap_lcd_dma_running(void);
-
-#endif /* __MACH_OMAP1_LCD_DMA_H__ */
diff --git a/arch/arm/mach-omap1/include/mach/lcdc.h b/arch/arm/mach-omap1/include/mach/lcdc.h
deleted file mode 100644
index 7152db1f5361..000000000000
--- a/arch/arm/mach-omap1/include/mach/lcdc.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-omap1/include/mach/lcdc.h
- *
- * Extracted from drivers/video/omap/lcdc.c
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- */
-#ifndef __MACH_LCDC_H__
-#define __MACH_LCDC_H__
-
-#define OMAP_LCDC_BASE			0xfffec000
-#define OMAP_LCDC_SIZE			256
-#define OMAP_LCDC_IRQ			INT_LCD_CTRL
-
-#define OMAP_LCDC_CONTROL		(OMAP_LCDC_BASE + 0x00)
-#define OMAP_LCDC_TIMING0		(OMAP_LCDC_BASE + 0x04)
-#define OMAP_LCDC_TIMING1		(OMAP_LCDC_BASE + 0x08)
-#define OMAP_LCDC_TIMING2		(OMAP_LCDC_BASE + 0x0c)
-#define OMAP_LCDC_STATUS		(OMAP_LCDC_BASE + 0x10)
-#define OMAP_LCDC_SUBPANEL		(OMAP_LCDC_BASE + 0x14)
-#define OMAP_LCDC_LINE_INT		(OMAP_LCDC_BASE + 0x18)
-#define OMAP_LCDC_DISPLAY_STATUS	(OMAP_LCDC_BASE + 0x1c)
-
-#define OMAP_LCDC_STAT_DONE		(1 << 0)
-#define OMAP_LCDC_STAT_VSYNC		(1 << 1)
-#define OMAP_LCDC_STAT_SYNC_LOST	(1 << 2)
-#define OMAP_LCDC_STAT_ABC		(1 << 3)
-#define OMAP_LCDC_STAT_LINE_INT		(1 << 4)
-#define OMAP_LCDC_STAT_FUF		(1 << 5)
-#define OMAP_LCDC_STAT_LOADED_PALETTE	(1 << 6)
-
-#define OMAP_LCDC_CTRL_LCD_EN		(1 << 0)
-#define OMAP_LCDC_CTRL_LCD_TFT		(1 << 7)
-#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL	(1 << 10)
-
-#define OMAP_LCDC_IRQ_VSYNC		(1 << 2)
-#define OMAP_LCDC_IRQ_DONE		(1 << 3)
-#define OMAP_LCDC_IRQ_LOADED_PALETTE	(1 << 4)
-#define OMAP_LCDC_IRQ_LINE_NIRQ		(1 << 5)
-#define OMAP_LCDC_IRQ_LINE		(1 << 6)
-#define OMAP_LCDC_IRQ_MASK		(((1 << 5) - 1) << 2)
-
-#endif /* __MACH_LCDC_H__ */
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
deleted file mode 100644
index 36bc0000cb6a..000000000000
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-omap1/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* REVISIT: omap1 legacy drivers still rely on this */
-#include <mach/soc.h>
-
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- */
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET	UL(0x30000000)
-
-#endif
diff --git a/arch/arm/mach-omap1/include/mach/mtd-xip.h b/arch/arm/mach-omap1/include/mach/mtd-xip.h
deleted file mode 100644
index d09b2bc4920f..000000000000
--- a/arch/arm/mach-omap1/include/mach/mtd-xip.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions.
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- *
- * Author: Vladimir Barinov <vbarinov@embeddedalley.com>
- *
- * (c) 2005 MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is
- * licensed "as is" without any warranty of any kind, whether express or
- * implied.
- */
-
-#ifndef __ARCH_OMAP_MTD_XIP_H__
-#define __ARCH_OMAP_MTD_XIP_H__
-
-#include <mach/hardware.h>
-#define OMAP_MPU_TIMER_BASE	(0xfffec500)
-#define OMAP_MPU_TIMER_OFFSET	0x100
-
-typedef struct {
-	u32 cntl;			/* CNTL_TIMER, R/W */
-	u32 load_tim;			/* LOAD_TIM,   W */
-	u32 read_tim;			/* READ_TIM,   R */
-} xip_omap_mpu_timer_regs_t;
-
-#define xip_omap_mpu_timer_base(n)					\
-((volatile xip_omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
-	(n)*OMAP_MPU_TIMER_OFFSET))
-
-static inline unsigned long xip_omap_mpu_timer_read(int nr)
-{
-	volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
-	return timer->read_tim;
-}
-
-#define xip_irqpending()	\
-	(omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
-#define xip_currtime()		(~xip_omap_mpu_timer_read(0))
-
-/*
- * It's permitted to do approximation for xip_elapsed_since macro
- * (see linux/mtd/xip.h)
- */
-
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
-#else
-#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
-#endif
-
-/*
- * xip_cpu_idle() is used when waiting for a delay equal or larger than
- * the system timer tick period.  This should put the CPU into idle mode
- * to save power and to be woken up only when some interrupts are pending.
- * As above, this should not rely upon standard kernel code.
- */
-
-#define xip_cpu_idle()  asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
-
-#endif /* __ARCH_OMAP_MTD_XIP_H__ */
diff --git a/arch/arm/mach-omap1/include/mach/mux.h b/arch/arm/mach-omap1/include/mach/mux.h
deleted file mode 100644
index 3f6dc55d9898..000000000000
--- a/arch/arm/mach-omap1/include/mach/mux.h
+++ /dev/null
@@ -1,441 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/plat-omap/include/mach/mux.h
- *
- * Table of the Omap register configurations for the FUNC_MUX and
- * PULL_DWN combinations.
- *
- * Copyright (C) 2004 - 2008 Texas Instruments Inc.
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * NOTE: Please use the following naming style for new pin entries.
- *	 For example, W8_1610_MMC2_DAT0, where:
- *	 - W8	     = ball
- *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
- *	 - MMC2_DAT0 = function
- */
-
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
-#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
-
-#ifdef	CONFIG_OMAP_MUX_DEBUG
-#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
-					.mux_reg = FUNC_MUX_CTRL_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
-					.pull_reg = PULL_DWN_CTRL_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
-					.pu_pd_reg = PU_PD_SEL_##reg, \
-					.pu_pd_val = status,
-
-#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
-					.mux_reg = OMAP7XX_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_7XX(reg, bit, status)	.pull_name = "OMAP7XX_IO_CONF_"#reg, \
-					.pull_reg = OMAP7XX_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#else
-
-#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
-					.pu_pd_val = status,
-
-#define MUX_REG_7XX(reg, mode_offset, mode) \
-					.mux_reg = OMAP7XX_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_7XX(reg, bit, status)	.pull_reg = OMAP7XX_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#endif /* CONFIG_OMAP_MUX_DEBUG */
-
-#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
-		pull_reg, pull_bit, pull_status,	\
-		pu_pd_reg, pu_pd_status, debug_status)	\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG(mux_reg, mode_offset, mode)		\
-	PULL_REG(pull_reg, pull_bit, pull_status)	\
-	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
-},
-
-
-/*
- * OMAP730/850 has a slightly different config for the pin mux.
- * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
- *   not the FUNC_MUX_CTRL_x regs from hardware.h
- * - for pull-up/down, only has one enable bit which is in the same register
- *   as mux config
- */
-#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode,	\
-		   pull_bit, pull_status, debug_status)\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG_7XX(mux_reg, mode_offset, mode)		\
-	PULL_REG_7XX(mux_reg, pull_bit, pull_status)	\
-	PU_PD_REG(NA, 0)		\
-},
-
-struct pin_config {
-	char 			*name;
-	const unsigned int 	mux_reg;
-	unsigned char		debug;
-
-	const unsigned char mask_offset;
-	const unsigned char mask;
-
-	const char *pull_name;
-	const unsigned int pull_reg;
-	const unsigned char pull_val;
-	const unsigned char pull_bit;
-
-	const char *pu_pd_name;
-	const unsigned int pu_pd_reg;
-	const unsigned char pu_pd_val;
-
-#if	defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
-	const char *mux_reg_name;
-#endif
-
-};
-
-enum omap7xx_index {
-	/* OMAP 730 keyboard */
-	E2_7XX_KBR0,
-	J7_7XX_KBR1,
-	E1_7XX_KBR2,
-	F3_7XX_KBR3,
-	D2_7XX_KBR4,
-	C2_7XX_KBC0,
-	D3_7XX_KBC1,
-	E4_7XX_KBC2,
-	F4_7XX_KBC3,
-	E3_7XX_KBC4,
-
-	/* USB */
-	AA17_7XX_USB_DM,
-	W16_7XX_USB_PU_EN,
-	W17_7XX_USB_VBUSI,
-	W18_7XX_USB_DMCK_OUT,
-	W19_7XX_USB_DCRST,
-
-	/* MMC */
-	MMC_7XX_CMD,
-	MMC_7XX_CLK,
-	MMC_7XX_DAT0,
-
-	/* I2C */
-	I2C_7XX_SCL,
-	I2C_7XX_SDA,
-
-	/* SPI */
-	SPI_7XX_1,
-	SPI_7XX_2,
-	SPI_7XX_3,
-	SPI_7XX_4,
-	SPI_7XX_5,
-	SPI_7XX_6,
-
-	/* UART */
-	UART_7XX_1,
-	UART_7XX_2,
-};
-
-enum omap1xxx_index {
-	/* UART1 (BT_UART_GATING)*/
-	UART1_TX = 0,
-	UART1_RTS,
-
-	/* UART2 (COM_UART_GATING)*/
-	UART2_TX,
-	UART2_RX,
-	UART2_CTS,
-	UART2_RTS,
-
-	/* UART3 (GIGA_UART_GATING) */
-	UART3_TX,
-	UART3_RX,
-	UART3_CTS,
-	UART3_RTS,
-	UART3_CLKREQ,
-	UART3_BCLK,	/* 12MHz clock out */
-	Y15_1610_UART3_RTS,
-
-	/* PWT & PWL */
-	PWT,
-	PWL,
-
-	/* USB master generic */
-	R18_USB_VBUS,
-	R18_1510_USB_GPIO0,
-	W4_USB_PUEN,
-	W4_USB_CLKO,
-	W4_USB_HIGHZ,
-	W4_GPIO58,
-
-	/* USB1 master */
-	USB1_SUSP,
-	USB1_SEO,
-	W13_1610_USB1_SE0,
-	USB1_TXEN,
-	USB1_TXD,
-	USB1_VP,
-	USB1_VM,
-	USB1_RCV,
-	USB1_SPEED,
-	R13_1610_USB1_SPEED,
-	R13_1710_USB1_SE0,
-
-	/* USB2 master */
-	USB2_SUSP,
-	USB2_VP,
-	USB2_TXEN,
-	USB2_VM,
-	USB2_RCV,
-	USB2_SEO,
-	USB2_TXD,
-
-	/* OMAP-1510 GPIO */
-	R18_1510_GPIO0,
-	R19_1510_GPIO1,
-	M14_1510_GPIO2,
-
-	/* OMAP1610 GPIO */
-	P18_1610_GPIO3,
-	Y15_1610_GPIO17,
-
-	/* OMAP-1710 GPIO */
-	R18_1710_GPIO0,
-	V2_1710_GPIO10,
-	N21_1710_GPIO14,
-	W15_1710_GPIO40,
-
-	/* MPUIO */
-	MPUIO2,
-	N15_1610_MPUIO2,
-	MPUIO4,
-	MPUIO5,
-	T20_1610_MPUIO5,
-	W11_1610_MPUIO6,
-	V10_1610_MPUIO7,
-	W11_1610_MPUIO9,
-	V10_1610_MPUIO10,
-	W10_1610_MPUIO11,
-	E20_1610_MPUIO13,
-	U20_1610_MPUIO14,
-	E19_1610_MPUIO15,
-
-	/* MCBSP2 */
-	MCBSP2_CLKR,
-	MCBSP2_CLKX,
-	MCBSP2_DR,
-	MCBSP2_DX,
-	MCBSP2_FSR,
-	MCBSP2_FSX,
-
-	/* MCBSP3 */
-	MCBSP3_CLKX,
-
-	/* Misc ballouts */
-	BALLOUT_V8_ARMIO3,
-	N20_HDQ,
-
-	/* OMAP-1610 MMC2 */
-	W8_1610_MMC2_DAT0,
-	V8_1610_MMC2_DAT1,
-	W15_1610_MMC2_DAT2,
-	R10_1610_MMC2_DAT3,
-	Y10_1610_MMC2_CLK,
-	Y8_1610_MMC2_CMD,
-	V9_1610_MMC2_CMDDIR,
-	V5_1610_MMC2_DATDIR0,
-	W19_1610_MMC2_DATDIR1,
-	R18_1610_MMC2_CLKIN,
-
-	/* OMAP-1610 External Trace Interface */
-	M19_1610_ETM_PSTAT0,
-	L15_1610_ETM_PSTAT1,
-	L18_1610_ETM_PSTAT2,
-	L19_1610_ETM_D0,
-	J19_1610_ETM_D6,
-	J18_1610_ETM_D7,
-
-	/* OMAP16XX GPIO */
-	P20_1610_GPIO4,
-	V9_1610_GPIO7,
-	W8_1610_GPIO9,
-	N20_1610_GPIO11,
-	N19_1610_GPIO13,
-	P10_1610_GPIO22,
-	V5_1610_GPIO24,
-	AA20_1610_GPIO_41,
-	W19_1610_GPIO48,
-	M7_1610_GPIO62,
-	V14_16XX_GPIO37,
-	R9_16XX_GPIO18,
-	L14_16XX_GPIO49,
-
-	/* OMAP-1610 uWire */
-	V19_1610_UWIRE_SCLK,
-	U18_1610_UWIRE_SDI,
-	W21_1610_UWIRE_SDO,
-	N14_1610_UWIRE_CS0,
-	P15_1610_UWIRE_CS3,
-	N15_1610_UWIRE_CS1,
-
-	/* OMAP-1610 SPI */
-	U19_1610_SPIF_SCK,
-	U18_1610_SPIF_DIN,
-	P20_1610_SPIF_DIN,
-	W21_1610_SPIF_DOUT,
-	R18_1610_SPIF_DOUT,
-	N14_1610_SPIF_CS0,
-	N15_1610_SPIF_CS1,
-	T19_1610_SPIF_CS2,
-	P15_1610_SPIF_CS3,
-
-	/* OMAP-1610 Flash */
-	L3_1610_FLASH_CS2B_OE,
-	M8_1610_FLASH_CS2B_WE,
-
-	/* First MMC */
-	MMC_CMD,
-	MMC_DAT1,
-	MMC_DAT2,
-	MMC_DAT0,
-	MMC_CLK,
-	MMC_DAT3,
-
-	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
-	M15_1710_MMC_CLKI,
-	P19_1710_MMC_CMDDIR,
-	P20_1710_MMC_DATDIR0,
-
-	/* OMAP-1610 USB0 alternate pin configuration */
-	W9_USB0_TXEN,
-	AA9_USB0_VP,
-	Y5_USB0_RCV,
-	R9_USB0_VM,
-	V6_USB0_TXD,
-	W5_USB0_SE0,
-	V9_USB0_SPEED,
-	V9_USB0_SUSP,
-
-	/* USB2 */
-	W9_USB2_TXEN,
-	AA9_USB2_VP,
-	Y5_USB2_RCV,
-	R9_USB2_VM,
-	V6_USB2_TXD,
-	W5_USB2_SE0,
-
-	/* 16XX UART */
-	R13_1610_UART1_TX,
-	V14_16XX_UART1_RX,
-	R14_1610_UART1_CTS,
-	AA15_1610_UART1_RTS,
-	R9_16XX_UART2_RX,
-	L14_16XX_UART3_RX,
-
-	/* I2C OMAP-1610 */
-	I2C_SCL,
-	I2C_SDA,
-
-	/* Keypad */
-	F18_1610_KBC0,
-	D20_1610_KBC1,
-	D19_1610_KBC2,
-	E18_1610_KBC3,
-	C21_1610_KBC4,
-	G18_1610_KBR0,
-	F19_1610_KBR1,
-	H14_1610_KBR2,
-	E20_1610_KBR3,
-	E19_1610_KBR4,
-	N19_1610_KBR5,
-
-	/* Power management */
-	T20_1610_LOW_PWR,
-
-	/* MCLK Settings */
-	V5_1710_MCLK_ON,
-	V5_1710_MCLK_OFF,
-	R10_1610_MCLK_ON,
-	R10_1610_MCLK_OFF,
-
-	/* CompactFlash controller */
-	P11_1610_CF_CD2,
-	R11_1610_CF_IOIS16,
-	V10_1610_CF_IREQ,
-	W10_1610_CF_RESET,
-	W11_1610_CF_CD1,
-
-	/* parallel camera */
-	J15_1610_CAM_LCLK,
-	J18_1610_CAM_D7,
-	J19_1610_CAM_D6,
-	J14_1610_CAM_D5,
-	K18_1610_CAM_D4,
-	K19_1610_CAM_D3,
-	K15_1610_CAM_D2,
-	K14_1610_CAM_D1,
-	L19_1610_CAM_D0,
-	L18_1610_CAM_VS,
-	L15_1610_CAM_HS,
-	M19_1610_CAM_RSTZ,
-	Y15_1610_CAM_OUTCLK,
-
-	/* serial camera */
-	H19_1610_CAM_EXCLK,
-	Y12_1610_CCP_CLKP,
-	W13_1610_CCP_CLKM,
-	W14_1610_CCP_DATAP,
-	Y14_1610_CCP_DATAM,
-
-};
-
-struct omap_mux_cfg {
-	struct pin_config	*pins;
-	unsigned long		size;
-	int			(*cfg_reg)(const struct pin_config *cfg);
-};
-
-#ifdef	CONFIG_OMAP_MUX
-/* setup pin muxing in Linux */
-extern int omap1_mux_init(void);
-extern int omap_mux_register(struct omap_mux_cfg *);
-extern int omap_cfg_reg(unsigned long reg_cfg);
-#else
-/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
-static inline int omap1_mux_init(void) { return 0; }
-static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
-#endif
-
-extern int omap2_mux_init(void);
-
-#endif
diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
deleted file mode 100644
index 3d235244bf5c..000000000000
--- a/arch/arm/mach-omap1/include/mach/omap1510.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Hardware definitions for TI OMAP1510 processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_H
-#define __ASM_ARCH_OMAP15XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP1510_DSP_BASE	0xE0000000
-#define OMAP1510_DSP_SIZE	0x28000
-#define OMAP1510_DSP_START	0xE0000000
-
-#define OMAP1510_DSPREG_BASE	0xE1000000
-#define OMAP1510_DSPREG_SIZE	SZ_128K
-#define OMAP1510_DSPREG_START	0xE1000000
-
-#define OMAP1510_DSP_MMU_BASE	(0xfffed200)
-
-/*
- * ---------------------------------------------------------------------------
- *  OMAP-1510 FPGA
- * ---------------------------------------------------------------------------
- */
-#define OMAP1510_FPGA_BASE		0xE8000000		/* VA */
-#define OMAP1510_FPGA_SIZE		SZ_4K
-#define OMAP1510_FPGA_START		0x08000000		/* PA */
-
-/* Revision */
-#define OMAP1510_FPGA_REV_LOW			IOMEM(OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH			IOMEM(OMAP1510_FPGA_BASE + 0x1)
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT			IOMEM(OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI			IOMEM(OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER			IOMEM(OMAP1510_FPGA_BASE + 0x5)
-
-/* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x7)
-
-/* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x9)
-
-/* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET		IOMEM(OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST			IOMEM(OMAP1510_FPGA_BASE + 0xb)
-
-#define OMAP1510_FPGA_AUDIO			IOMEM(OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP			IOMEM(OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO			IOMEM(OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1			IOMEM(OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2			IOMEM(OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS		IOMEM(OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV			IOMEM(OMAP1510_FPGA_BASE + 0x18)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20c)
-#define OMAP1510P1_PPT_DATA			IOMEM(OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS			IOMEM(OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL			IOMEM(OMAP1510_FPGA_BASE + 0x102)
-
-#define OMAP1510_FPGA_TOUCHSCREEN		IOMEM(OMAP1510_FPGA_BASE + 0x204)
-
-#define INNOVATOR_FPGA_INFO			IOMEM(OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO		IOMEM(OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI		IOMEM(OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO		IOMEM(OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI		IOMEM(OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO		IOMEM(OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI		IOMEM(OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_EXP_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2			IOMEM(OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2			IOMEM(OMAP1510_FPGA_BASE + 0x210)
-
-#define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)
-
-/*
- * Power up Giga UART driver, turn on HID clock.
- * Turn off BT power, since we're not using it and it
- * draws power.
- */
-#define OMAP1510_FPGA_RESET_VALUE		0x42
-
-#define OMAP1510_FPGA_PCR_IF_PD0		(1 << 7)
-#define OMAP1510_FPGA_PCR_COM2_EN		(1 << 6)
-#define OMAP1510_FPGA_PCR_COM1_EN		(1 << 5)
-#define OMAP1510_FPGA_PCR_EXP_PD0		(1 << 4)
-#define OMAP1510_FPGA_PCR_EXP_PD1		(1 << 3)
-#define OMAP1510_FPGA_PCR_48MHZ_CLK		(1 << 2)
-#define OMAP1510_FPGA_PCR_4MHZ_CLK		(1 << 1)
-#define OMAP1510_FPGA_PCR_RSRVD_BIT0		(1 << 0)
-
-/*
- * Innovator/OMAP1510 FPGA HID register bit definitions
- */
-#define OMAP1510_FPGA_HID_SCLK	(1<<0)	/* output */
-#define OMAP1510_FPGA_HID_MOSI	(1<<1)	/* output */
-#define OMAP1510_FPGA_HID_nSS	(1<<2)	/* output 0/1 chip idle/select */
-#define OMAP1510_FPGA_HID_nHSUS	(1<<3)	/* output 0/1 host active/suspended */
-#define OMAP1510_FPGA_HID_MISO	(1<<4)	/* input */
-#define OMAP1510_FPGA_HID_ATN	(1<<5)	/* input  0/1 chip idle/ATN */
-#define OMAP1510_FPGA_HID_rsrvd	(1<<6)
-#define OMAP1510_FPGA_HID_RESETn (1<<7)	/* output - 0/1 USAR reset/run */
-
-/* The FPGA IRQ is cascaded through GPIO_13 */
-#define OMAP1510_INT_FPGA		(IH_GPIO_BASE + 13)
-
-/* IRQ Numbers for interrupts muxed through the FPGA */
-#define OMAP1510_INT_FPGA_ATN		(OMAP_FPGA_IRQ_BASE + 0)
-#define OMAP1510_INT_FPGA_ACK		(OMAP_FPGA_IRQ_BASE + 1)
-#define OMAP1510_INT_FPGA2		(OMAP_FPGA_IRQ_BASE + 2)
-#define OMAP1510_INT_FPGA3		(OMAP_FPGA_IRQ_BASE + 3)
-#define OMAP1510_INT_FPGA4		(OMAP_FPGA_IRQ_BASE + 4)
-#define OMAP1510_INT_FPGA5		(OMAP_FPGA_IRQ_BASE + 5)
-#define OMAP1510_INT_FPGA6		(OMAP_FPGA_IRQ_BASE + 6)
-#define OMAP1510_INT_FPGA7		(OMAP_FPGA_IRQ_BASE + 7)
-#define OMAP1510_INT_FPGA8		(OMAP_FPGA_IRQ_BASE + 8)
-#define OMAP1510_INT_FPGA9		(OMAP_FPGA_IRQ_BASE + 9)
-#define OMAP1510_INT_FPGA10		(OMAP_FPGA_IRQ_BASE + 10)
-#define OMAP1510_INT_FPGA11		(OMAP_FPGA_IRQ_BASE + 11)
-#define OMAP1510_INT_FPGA12		(OMAP_FPGA_IRQ_BASE + 12)
-#define OMAP1510_INT_ETHER		(OMAP_FPGA_IRQ_BASE + 13)
-#define OMAP1510_INT_FPGAUART1		(OMAP_FPGA_IRQ_BASE + 14)
-#define OMAP1510_INT_FPGAUART2		(OMAP_FPGA_IRQ_BASE + 15)
-#define OMAP1510_INT_FPGA_TS		(OMAP_FPGA_IRQ_BASE + 16)
-#define OMAP1510_INT_FPGA17		(OMAP_FPGA_IRQ_BASE + 17)
-#define OMAP1510_INT_FPGA_CAM		(OMAP_FPGA_IRQ_BASE + 18)
-#define OMAP1510_INT_FPGA_RTC_A		(OMAP_FPGA_IRQ_BASE + 19)
-#define OMAP1510_INT_FPGA_RTC_B		(OMAP_FPGA_IRQ_BASE + 20)
-#define OMAP1510_INT_FPGA_CD		(OMAP_FPGA_IRQ_BASE + 21)
-#define OMAP1510_INT_FPGA22		(OMAP_FPGA_IRQ_BASE + 22)
-#define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
-
-#endif /*  __ASM_ARCH_OMAP15XX_H */
-
diff --git a/arch/arm/mach-omap1/include/mach/omap16xx.h b/arch/arm/mach-omap1/include/mach/omap16xx.h
deleted file mode 100644
index cd1c724869c7..000000000000
--- a/arch/arm/mach-omap1/include/mach/omap16xx.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Hardware definitions for TI OMAP1610/5912/1710 processors.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP16XX_H
-#define __ASM_ARCH_OMAP16XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP16XX_DSP_BASE	0xE0000000
-#define OMAP16XX_DSP_SIZE	0x28000
-#define OMAP16XX_DSP_START	0xE0000000
-
-#define OMAP16XX_DSPREG_BASE	0xE1000000
-#define OMAP16XX_DSPREG_SIZE	SZ_128K
-#define OMAP16XX_DSPREG_START	0xE1000000
-
-#define OMAP16XX_SEC_BASE	0xFFFE4000
-#define OMAP16XX_SEC_DES	(OMAP16XX_SEC_BASE + 0x0000)
-#define OMAP16XX_SEC_SHA1MD5	(OMAP16XX_SEC_BASE + 0x0800)
-#define OMAP16XX_SEC_RNG	(OMAP16XX_SEC_BASE + 0x1000)
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#define OMAP_IH2_0_BASE		(0xfffe0000)
-#define OMAP_IH2_1_BASE		(0xfffe0100)
-#define OMAP_IH2_2_BASE		(0xfffe0200)
-#define OMAP_IH2_3_BASE		(0xfffe0300)
-
-#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
-#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
-#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
-#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
-#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
-#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
-#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
-
-#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
-#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
-#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
-#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
-#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
-#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
-#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
-
-#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
-#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
-#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
-#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
-#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
-#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
-#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
-
-#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
-#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
-#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
-#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
-#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
-#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
-#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_ARM_IDLECT3	(CLKGEN_REG_BASE + 0x24)
-
-/*
- * ----------------------------------------------------------------------------
- * Pin configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV6	(1 << 8)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV7	(1 << 9)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV8	(1 << 10)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV9	(1 << 11)
-#define OMAP16XX_SUBLVDS_CONF_VALID	(1 << 13)
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP1610_RESET_CONTROL  0xfffe1140
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_SWITCH_BASE		 (0xfffbc800)
-#define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
-
-/* UART3 Registers Mapping through MPU bus */
-#define UART3_RHR               (OMAP1_UART3_BASE + 0)
-#define UART3_THR               (OMAP1_UART3_BASE + 0)
-#define UART3_DLL               (OMAP1_UART3_BASE + 0)
-#define UART3_IER               (OMAP1_UART3_BASE + 4)
-#define UART3_DLH               (OMAP1_UART3_BASE + 4)
-#define UART3_IIR               (OMAP1_UART3_BASE + 8)
-#define UART3_FCR               (OMAP1_UART3_BASE + 8)
-#define UART3_EFR               (OMAP1_UART3_BASE + 8)
-#define UART3_LCR               (OMAP1_UART3_BASE + 0x0C)
-#define UART3_MCR               (OMAP1_UART3_BASE + 0x10)
-#define UART3_XON1_ADDR1        (OMAP1_UART3_BASE + 0x10)
-#define UART3_XON2_ADDR2        (OMAP1_UART3_BASE + 0x14)
-#define UART3_LSR               (OMAP1_UART3_BASE + 0x14)
-#define UART3_TCR               (OMAP1_UART3_BASE + 0x18)
-#define UART3_MSR               (OMAP1_UART3_BASE + 0x18)
-#define UART3_XOFF1             (OMAP1_UART3_BASE + 0x18)
-#define UART3_XOFF2             (OMAP1_UART3_BASE + 0x1C)
-#define UART3_SPR               (OMAP1_UART3_BASE + 0x1C)
-#define UART3_TLR               (OMAP1_UART3_BASE + 0x1C)
-#define UART3_MDR1              (OMAP1_UART3_BASE + 0x20)
-#define UART3_MDR2              (OMAP1_UART3_BASE + 0x24)
-#define UART3_SFLSR             (OMAP1_UART3_BASE + 0x28)
-#define UART3_TXFLL             (OMAP1_UART3_BASE + 0x28)
-#define UART3_RESUME            (OMAP1_UART3_BASE + 0x2C)
-#define UART3_TXFLH             (OMAP1_UART3_BASE + 0x2C)
-#define UART3_SFREGL            (OMAP1_UART3_BASE + 0x30)
-#define UART3_RXFLL             (OMAP1_UART3_BASE + 0x30)
-#define UART3_SFREGH            (OMAP1_UART3_BASE + 0x34)
-#define UART3_RXFLH             (OMAP1_UART3_BASE + 0x34)
-#define UART3_BLR               (OMAP1_UART3_BASE + 0x38)
-#define UART3_ACREG             (OMAP1_UART3_BASE + 0x3C)
-#define UART3_DIV16             (OMAP1_UART3_BASE + 0x3C)
-#define UART3_SCR               (OMAP1_UART3_BASE + 0x40)
-#define UART3_SSR               (OMAP1_UART3_BASE + 0x44)
-#define UART3_EBLR              (OMAP1_UART3_BASE + 0x48)
-#define UART3_OSC_12M_SEL       (OMAP1_UART3_BASE + 0x4C)
-#define UART3_MVR               (OMAP1_UART3_BASE + 0x50)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* 32-bit Watchdog timer in OMAP 16XX */
-#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
-#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
-#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
-#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
-#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
-#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
-#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
-#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
-#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
-#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)
-
-#define WCLR_PRE_SHIFT         5
-#define WCLR_PTV_SHIFT         2
-
-#define WWPS_W_PEND_WSPR       (1 << 4)
-#define WWPS_W_PEND_WTGR       (1 << 3)
-#define WWPS_W_PEND_WLDR       (1 << 2)
-#define WWPS_W_PEND_WCRR       (1 << 1)
-#define WWPS_W_PEND_WCLR       (1 << 0)
-
-#define WSPR_ENABLE_0          (0x0000bbbb)
-#define WSPR_ENABLE_1          (0x00004444)
-#define WSPR_DISABLE_0         (0x0000aaaa)
-#define WSPR_DISABLE_1         (0x00005555)
-
-#define OMAP16XX_DSP_MMU_BASE	(0xfffed200)
-#define OMAP16XX_MAILBOX_BASE	(0xfffcf000)
-
-#endif /*  __ASM_ARCH_OMAP16XX_H */
-
diff --git a/arch/arm/mach-omap1/include/mach/omap7xx.h b/arch/arm/mach-omap1/include/mach/omap7xx.h
deleted file mode 100644
index 63da994bc609..000000000000
--- a/arch/arm/mach-omap1/include/mach/omap7xx.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * Hardware definitions for TI OMAP7XX processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
- * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP7XX_H
-#define __ASM_ARCH_OMAP7XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP7XX_DSP_BASE	0xE0000000
-#define OMAP7XX_DSP_SIZE	0x50000
-#define OMAP7XX_DSP_START	0xE0000000
-
-#define OMAP7XX_DSPREG_BASE	0xE1000000
-#define OMAP7XX_DSPREG_SIZE	SZ_128K
-#define OMAP7XX_DSPREG_START	0xE1000000
-
-#define OMAP7XX_SPI1_BASE	0xfffc0800
-#define OMAP7XX_SPI2_BASE	0xfffc1000
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX specific configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_CONFIG_BASE	0xfffe1000
-#define OMAP7XX_IO_CONF_0	0xfffe1070
-#define OMAP7XX_IO_CONF_1	0xfffe1074
-#define OMAP7XX_IO_CONF_2	0xfffe1078
-#define OMAP7XX_IO_CONF_3	0xfffe107c
-#define OMAP7XX_IO_CONF_4	0xfffe1080
-#define OMAP7XX_IO_CONF_5	0xfffe1084
-#define OMAP7XX_IO_CONF_6	0xfffe1088
-#define OMAP7XX_IO_CONF_7	0xfffe108c
-#define OMAP7XX_IO_CONF_8	0xfffe1090
-#define OMAP7XX_IO_CONF_9	0xfffe1094
-#define OMAP7XX_IO_CONF_10	0xfffe1098
-#define OMAP7XX_IO_CONF_11	0xfffe109c
-#define OMAP7XX_IO_CONF_12	0xfffe10a0
-#define OMAP7XX_IO_CONF_13	0xfffe10a4
-
-#define OMAP7XX_MODE_1		0xfffe1010
-#define OMAP7XX_MODE_2		0xfffe1014
-
-/* CSMI specials: in terms of base + offset */
-#define OMAP7XX_MODE2_OFFSET	0x14
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX traffic controller configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_FLASH_CFG_0	0xfffecc10
-#define OMAP7XX_FLASH_ACFG_0	0xfffecc50
-#define OMAP7XX_FLASH_CFG_1	0xfffecc14
-#define OMAP7XX_FLASH_ACFG_1	0xfffecc54
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX DSP control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_ICR_BASE	0xfffbb800
-#define OMAP7XX_DSP_M_CTL	0xfffbb804
-#define OMAP7XX_DSP_MMU_BASE	0xfffed200
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX PCC_UPLD configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_PCC_UPLD_CTRL_BASE	(0xfffe0900)
-#define OMAP7XX_PCC_UPLD_CTRL		(OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
-
-#endif /*  __ASM_ARCH_OMAP7XX_H */
-
diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h
deleted file mode 100644
index 1897cbabfc93..000000000000
--- a/arch/arm/mach-omap1/include/mach/soc.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * OMAP cpu type detection
- *
- * Copyright (C) 2004, 2008 Nokia Corporation
- *
- * Copyright (C) 2009-11 Texas Instruments.
- *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
- *
- * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
- */
-
-#ifndef __ASM_ARCH_OMAP_CPU_H
-#define __ASM_ARCH_OMAP_CPU_H
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#ifndef __ASSEMBLY__
-
-#include <linux/bitops.h>
-
-/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap850
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap16xx
-# endif
-#endif
-
-/*
- * omap_rev bits:
- * CPU id bits	(0730, 1510, 1710, 2422...)	[31:16]
- * CPU revision	(See _REV_ defined in cpu.h)	[15:08]
- * CPU class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
- */
-unsigned int omap_rev(void);
-
-/*
- * Get the CPU revision for OMAP devices
- */
-#define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
-
-/*
- * Macros to group OMAP into cpu classes.
- * These can be used in most places.
- * cpu_is_omap7xx():	True for OMAP730, OMAP850
- * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
- * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
- */
-#define GET_OMAP_CLASS	(omap_rev() & 0xff)
-
-#define IS_OMAP_CLASS(class, id)			\
-static inline int is_omap ##class (void)		\
-{							\
-	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
-}
-
-#define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
-
-#define IS_OMAP_SUBCLASS(subclass, id)			\
-static inline int is_omap ##subclass (void)		\
-{							\
-	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
-}
-
-IS_OMAP_CLASS(7xx, 0x07)
-IS_OMAP_CLASS(15xx, 0x15)
-IS_OMAP_CLASS(16xx, 0x16)
-
-#define cpu_is_omap7xx()		0
-#define cpu_is_omap15xx()		0
-#define cpu_is_omap16xx()		0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		is_omap15xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		is_omap16xx()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		1
-# endif
-#endif
-
-/*
- * Macros to detect individual cpu types.
- * These are only rarely needed.
- * cpu_is_omap310():	True for OMAP310
- * cpu_is_omap1510():	True for OMAP1510
- * cpu_is_omap1610():	True for OMAP1610
- * cpu_is_omap1611():	True for OMAP1611
- * cpu_is_omap5912():	True for OMAP5912
- * cpu_is_omap1621():	True for OMAP1621
- * cpu_is_omap1710():	True for OMAP1710
- */
-#define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
-
-#define IS_OMAP_TYPE(type, id)				\
-static inline int is_omap ##type (void)			\
-{							\
-	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
-}
-
-IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(1510, 0x1510)
-IS_OMAP_TYPE(1610, 0x1610)
-IS_OMAP_TYPE(1611, 0x1611)
-IS_OMAP_TYPE(5912, 0x1611)
-IS_OMAP_TYPE(1621, 0x1621)
-IS_OMAP_TYPE(1710, 0x1710)
-
-#define cpu_is_omap310()		0
-#define cpu_is_omap1510()		0
-#define cpu_is_omap1610()		0
-#define cpu_is_omap5912()		0
-#define cpu_is_omap1611()		0
-#define cpu_is_omap1621()		0
-#define cpu_is_omap1710()		0
-
-/* These are needed to compile common code */
-#ifdef CONFIG_ARCH_OMAP1
-#define cpu_is_omap242x()		0
-#define cpu_is_omap2430()		0
-#define cpu_is_omap243x()		0
-#define cpu_is_omap24xx()		0
-#define cpu_is_omap34xx()		0
-#define cpu_is_omap44xx()		0
-#define soc_is_omap54xx()		0
-#define soc_is_dra7xx()			0
-#define soc_is_am33xx()			0
-#define cpu_class_is_omap1()		1
-#define cpu_class_is_omap2()		0
-#endif
-
-/*
- * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 310 vs. 1510 and 1611B/5912 vs. 1710.
- */
-
-#if defined(CONFIG_ARCH_OMAP15XX)
-# undef  cpu_is_omap310
-# undef  cpu_is_omap1510
-# define cpu_is_omap310()		is_omap310()
-# define cpu_is_omap1510()		is_omap1510()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-# undef  cpu_is_omap1610
-# undef  cpu_is_omap1611
-# undef  cpu_is_omap5912
-# undef  cpu_is_omap1621
-# undef  cpu_is_omap1710
-# define cpu_is_omap1610()		is_omap1610()
-# define cpu_is_omap1611()		is_omap1611()
-# define cpu_is_omap5912()		is_omap5912()
-# define cpu_is_omap1621()		is_omap1621()
-# define cpu_is_omap1710()		is_omap1710()
-#endif
-
-#endif	/* __ASSEMBLY__ */
-#endif
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
deleted file mode 100644
index 9cca6a56788f..000000000000
--- a/arch/arm/mach-omap1/include/mach/uncompress.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-
-#include "serial.h"
-
-#define MDR1_MODE_MASK			0x07
-
-volatile u8 *uart_base;
-int uart_shift;
-
-/*
- * Store the DEBUG_LL uart number into memory.
- * See also debug-macro.S, and serial.c for related code.
- */
-static void set_omap_uart_info(unsigned char port)
-{
-	/*
-	 * Get address of some.bss variable and round it down
-	 * a la CONFIG_AUTO_ZRELADDR.
-	 */
-	u32 ram_start = (u32)&uart_shift & 0xf8000000;
-	u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
-	*uart_info = port;
-}
-
-static inline void putc(int c)
-{
-	if (!uart_base)
-		return;
-
-	/* Check for UART 16x mode */
-	if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
-		return;
-
-	while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
-		barrier();
-	uart_base[UART_TX << uart_shift] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * Macros to configure UART1 and debug UART
- */
-#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id)		\
-	if (machine_is_##mach()) {					\
-		uart_base = (volatile u8 *)(dbg_uart);			\
-		uart_shift = (dbg_shft);				\
-		port = (dbg_id);					\
-		set_omap_uart_info(port);				\
-		break;							\
-	}
-
-#define DEBUG_LL_OMAP7XX(p, mach)					\
-	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT,	\
-		OMAP1UART##p)
-
-#define DEBUG_LL_OMAP1(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT,	\
-		OMAP1UART##p)
-
-static inline void arch_decomp_setup(void)
-{
-	int port = 0;
-
-	/*
-	 * Initialize the port based on the machine ID from the bootloader.
-	 * Note that we're using macros here instead of switch statement
-	 * as machine_is functions are optimized out for the boards that
-	 * are not selected.
-	 */
-	do {
-		/* omap7xx/8xx based boards using UART1 with shift 0 */
-		DEBUG_LL_OMAP7XX(1, herald);
-		DEBUG_LL_OMAP7XX(1, omap_perseus2);
-
-		/* omap15xx/16xx based boards using UART1 */
-		DEBUG_LL_OMAP1(1, ams_delta);
-		DEBUG_LL_OMAP1(1, nokia770);
-		DEBUG_LL_OMAP1(1, omap_h2);
-		DEBUG_LL_OMAP1(1, omap_h3);
-		DEBUG_LL_OMAP1(1, omap_innovator);
-		DEBUG_LL_OMAP1(1, omap_osk);
-		DEBUG_LL_OMAP1(1, omap_palmte);
-		DEBUG_LL_OMAP1(1, omap_palmz71);
-
-		/* omap15xx/16xx based boards using UART2 */
-		DEBUG_LL_OMAP1(2, omap_palmtt);
-
-		/* omap15xx/16xx based boards using UART3 */
-		DEBUG_LL_OMAP1(3, sx1);
-	} while (0);
-}
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
deleted file mode 100644
index 5429d86c7190..000000000000
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * FIXME correct answer depends on hmc_mode,
- * as does (on omap1) any nonzero value for config->otg port number
- */
-#if IS_ENABLED(CONFIG_USB_OMAP)
-#define	is_usb0_device(config)	1
-#else
-#define	is_usb0_device(config)	0
-#endif
-
-#include <linux/platform_data/usb-omap1.h>
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-void omap1_usb_init(struct omap_usb_config *pdata);
-#else
-static inline void omap1_usb_init(struct omap_usb_config *pdata)
-{
-}
-#endif
-
-#define OMAP1_OTG_BASE			0xfffb0400
-#define OMAP1_UDC_BASE			0xfffb4000
-#define OMAP1_OHCI_BASE			0xfffba000
-
-#define OMAP2_OHCI_BASE			0x4805e000
-#define OMAP2_UDC_BASE			0x4805e200
-#define OMAP2_OTG_BASE			0x4805e300
-#define OTG_BASE			OMAP1_OTG_BASE
-#define UDC_BASE			OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
-
-/*
- * OTG and transceiver registers, for OMAPs starting with ARM926
- */
-#define OTG_REV				(OTG_BASE + 0x00)
-#define OTG_SYSCON_1			(OTG_BASE + 0x04)
-#	define	 USB2_TRX_MODE(w)	(((w)>>24)&0x07)
-#	define	 USB1_TRX_MODE(w)	(((w)>>20)&0x07)
-#	define	 USB0_TRX_MODE(w)	(((w)>>16)&0x07)
-#	define	 OTG_IDLE_EN		(1 << 15)
-#	define	 HST_IDLE_EN		(1 << 14)
-#	define	 DEV_IDLE_EN		(1 << 13)
-#	define	 OTG_RESET_DONE		(1 << 2)
-#	define	 OTG_SOFT_RESET		(1 << 1)
-#define OTG_SYSCON_2			(OTG_BASE + 0x08)
-#	define	 OTG_EN			(1 << 31)
-#	define	 USBX_SYNCHRO		(1 << 30)
-#	define	 OTG_MST16		(1 << 29)
-#	define	 SRP_GPDATA		(1 << 28)
-#	define	 SRP_GPDVBUS		(1 << 27)
-#	define	 SRP_GPUVBUS(w)		(((w)>>24)&0x07)
-#	define	 A_WAIT_VRISE(w)	(((w)>>20)&0x07)
-#	define	 B_ASE_BRST(w)		(((w)>>16)&0x07)
-#	define	 SRP_DPW		(1 << 14)
-#	define	 SRP_DATA		(1 << 13)
-#	define	 SRP_VBUS		(1 << 12)
-#	define	 OTG_PADEN		(1 << 10)
-#	define	 HMC_PADEN		(1 << 9)
-#	define	 UHOST_EN		(1 << 8)
-#	define	 HMC_TLLSPEED		(1 << 7)
-#	define	 HMC_TLLATTACH		(1 << 6)
-#	define	 OTG_HMC(w)		(((w)>>0)&0x3f)
-#define OTG_CTRL			(OTG_BASE + 0x0c)
-#	define	 OTG_USB2_EN		(1 << 29)
-#	define	 OTG_USB2_DP		(1 << 28)
-#	define	 OTG_USB2_DM		(1 << 27)
-#	define	 OTG_USB1_EN		(1 << 26)
-#	define	 OTG_USB1_DP		(1 << 25)
-#	define	 OTG_USB1_DM		(1 << 24)
-#	define	 OTG_USB0_EN		(1 << 23)
-#	define	 OTG_USB0_DP		(1 << 22)
-#	define	 OTG_USB0_DM		(1 << 21)
-#	define	 OTG_ASESSVLD		(1 << 20)
-#	define	 OTG_BSESSEND		(1 << 19)
-#	define	 OTG_BSESSVLD		(1 << 18)
-#	define	 OTG_VBUSVLD		(1 << 17)
-#	define	 OTG_ID			(1 << 16)
-#	define	 OTG_DRIVER_SEL		(1 << 15)
-#	define	 OTG_A_SETB_HNPEN	(1 << 12)
-#	define	 OTG_A_BUSREQ		(1 << 11)
-#	define	 OTG_B_HNPEN		(1 << 9)
-#	define	 OTG_B_BUSREQ		(1 << 8)
-#	define	 OTG_BUSDROP		(1 << 7)
-#	define	 OTG_PULLDOWN		(1 << 5)
-#	define	 OTG_PULLUP		(1 << 4)
-#	define	 OTG_DRV_VBUS		(1 << 3)
-#	define	 OTG_PD_VBUS		(1 << 2)
-#	define	 OTG_PU_VBUS		(1 << 1)
-#	define	 OTG_PU_ID		(1 << 0)
-#define OTG_IRQ_EN			(OTG_BASE + 0x10)	/* 16-bit */
-#	define	 DRIVER_SWITCH		(1 << 15)
-#	define	 A_VBUS_ERR		(1 << 13)
-#	define	 A_REQ_TMROUT		(1 << 12)
-#	define	 A_SRP_DETECT		(1 << 11)
-#	define	 B_HNP_FAIL		(1 << 10)
-#	define	 B_SRP_TMROUT		(1 << 9)
-#	define	 B_SRP_DONE		(1 << 8)
-#	define	 B_SRP_STARTED		(1 << 7)
-#	define	 OPRT_CHG		(1 << 0)
-#define OTG_IRQ_SRC			(OTG_BASE + 0x14)	/* 16-bit */
-	// same bits as in IRQ_EN
-#define OTG_OUTCTRL			(OTG_BASE + 0x18)	/* 16-bit */
-#	define	 OTGVPD			(1 << 14)
-#	define	 OTGVPU			(1 << 13)
-#	define	 OTGPUID		(1 << 12)
-#	define	 USB2VDR		(1 << 10)
-#	define	 USB2PDEN		(1 << 9)
-#	define	 USB2PUEN		(1 << 8)
-#	define	 USB1VDR		(1 << 6)
-#	define	 USB1PDEN		(1 << 5)
-#	define	 USB1PUEN		(1 << 4)
-#	define	 USB0VDR		(1 << 2)
-#	define	 USB0PDEN		(1 << 1)
-#	define	 USB0PUEN		(1 << 0)
-#define OTG_TEST			(OTG_BASE + 0x20)	/* 16-bit */
-#define OTG_VENDOR_CODE			(OTG_BASE + 0xfc)	/* 16-bit */
-
-/*-------------------------------------------------------------------------*/
-
-/* OMAP1 */
-#define	USB_TRANSCEIVER_CTRL		(0xfffe1000 + 0x0064)
-#	define	CONF_USB2_UNI_R		(1 << 8)
-#	define	CONF_USB1_UNI_R		(1 << 7)
-#	define	CONF_USB_PORT0_R(x)	(((x)>>4)&0x7)
-#	define	CONF_USB0_ISOLATE_R	(1 << 3)
-#	define	CONF_USB_PWRDN_DM_R	(1 << 2)
-#	define	CONF_USB_PWRDN_DP_R	(1 << 1)
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 5a173fc2a1ca..1f20fe99be57 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -9,111 +9,46 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/omap-dma.h>
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <linux/omap-dma.h>
-
+#include "tc.h"
 #include "iomap.h"
 #include "common.h"
-#include "clock.h"
 
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
  */
-static struct map_desc omap_io_desc[] __initdata = {
+static struct map_desc omap1_io_desc[] __initdata = {
 	{
 		.virtual	= OMAP1_IO_VIRT,
 		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
 		.length		= OMAP1_IO_SIZE,
 		.type		= MT_DEVICE
-	}
-};
-
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-static struct map_desc omap7xx_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP7XX_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP7XX_DSP_START),
-		.length		= OMAP7XX_DSP_SIZE,
-		.type		= MT_DEVICE
 	}, {
-		.virtual	= OMAP7XX_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP7XX_DSPREG_START),
-		.length		= OMAP7XX_DSPREG_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static struct map_desc omap1510_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP1510_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP1510_DSP_START),
-		.length		= OMAP1510_DSP_SIZE,
+		.virtual	= OMAP1_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP1_DSP_START),
+		.length		= OMAP1_DSP_SIZE,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= OMAP1510_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP1510_DSPREG_START),
-		.length		= OMAP1510_DSPREG_SIZE,
+		.virtual	= OMAP1_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP1_DSPREG_START),
+		.length		= OMAP1_DSPREG_SIZE,
 		.type		= MT_DEVICE
 	}
 };
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-static struct map_desc omap16xx_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP16XX_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP16XX_DSP_START),
-		.length		= OMAP16XX_DSP_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= OMAP16XX_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP16XX_DSPREG_START),
-		.length		= OMAP16XX_DSPREG_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-#endif
 
 /*
  * Maps common IO regions for omap1
  */
-static void __init omap1_map_common_io(void)
+void __init omap1_map_io(void)
 {
-	iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
+	iotable_init(omap1_io_desc, ARRAY_SIZE(omap1_io_desc));
 }
 
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-void __init omap7xx_map_io(void)
-{
-	omap1_map_common_io();
-	iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-void __init omap15xx_map_io(void)
-{
-	omap1_map_common_io();
-	iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-void __init omap16xx_map_io(void)
-{
-	omap1_map_common_io();
-	iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
-}
-#endif
-
 /*
  * Common low-level hardware init for omap1.
  */
@@ -126,11 +61,6 @@ void __init omap1_init_early(void)
 	 */
 	omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL);
 	omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL);
-
-	/* Must init clocks early to assure that timer interrupt works
-	 */
-	omap1_clk_init();
-	omap1_mux_init();
 }
 
 void __init omap1_init_late(void)
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index b11edc8a46f0..bfc7ab010ae2 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -41,15 +41,14 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/irqdomain.h>
 
 #include <asm/irq.h>
 #include <asm/exception.h>
 #include <asm/mach/irq.h>
 
 #include "soc.h"
-
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "common.h"
 
 #define IRQ_BANK(irq) ((irq) >> 5)
@@ -112,14 +111,6 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger)
 	irq_bank_writel(val, bank, offset);
 }
 
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-static struct omap_irq_bank omap7xx_irq_banks[] = {
-	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f },
-	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 },
-	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 },
-};
-#endif
-
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_irq_bank omap1510_irq_banks[] = {
 	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3febfff },
@@ -165,7 +156,7 @@ asmlinkage void __exception_irq_entry omap1_handle_irq(struct pt_regs *regs)
 		}
 irq:
 		if (irqnr)
-			handle_domain_irq(domain, irqnr, regs);
+			generic_handle_domain_irq(domain, irqnr);
 		else
 			break;
 	} while (irqnr);
@@ -196,12 +187,6 @@ void __init omap1_init_irq(void)
 	int i, j, irq_base;
 	unsigned long nr_irqs;
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	if (cpu_is_omap7xx()) {
-		irq_banks = omap7xx_irq_banks;
-		irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
-	}
-#endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		irq_banks = omap1510_irq_banks;
@@ -232,7 +217,7 @@ void __init omap1_init_irq(void)
 		pr_warn("Couldn't allocate IRQ numbers\n");
 		irq_base = 0;
 	}
-	omap_l2_irq = cpu_is_omap7xx() ? irq_base + 1 : irq_base;
+	omap_l2_irq = irq_base;
 	omap_l2_irq -= NR_IRQS_LEGACY;
 
 	domain = irq_domain_add_legacy(NULL, nr_irqs, irq_base, 0,
@@ -251,10 +236,6 @@ void __init omap1_init_irq(void)
 	irq_bank_writel(0x03, 0, IRQ_CONTROL_REG_OFFSET);
 	irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET);
 
-	/* Enable interrupts in global mask */
-	if (cpu_is_omap7xx())
-		irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET);
-
 	/* Install the interrupt handlers for each bank */
 	for (i = 0; i < irq_bank_count; i++) {
 		for (j = i * 32; j < (i + 1) * 32; j++) {
diff --git a/arch/arm/mach-omap1/irqs.h b/arch/arm/mach-omap1/irqs.h
new file mode 100644
index 000000000000..3ab7050b1b6b
--- /dev/null
+++ b/arch/arm/mach-omap1/irqs.h
@@ -0,0 +1,240 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Copyright (C) Greg Lonnon 2001
+ *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ *	 are different.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA		(NR_IRQS_LEGACY + 1)
+#define INT_FIQ			(NR_IRQS_LEGACY + 3)
+#define INT_RTDX		(NR_IRQS_LEGACY + 6)
+#define INT_DSP_MMU_ABORT	(NR_IRQS_LEGACY + 7)
+#define INT_HOST		(NR_IRQS_LEGACY + 8)
+#define INT_ABORT		(NR_IRQS_LEGACY + 9)
+#define INT_BRIDGE_PRIV		(NR_IRQS_LEGACY + 13)
+#define INT_GPIO_BANK1		(NR_IRQS_LEGACY + 14)
+#define INT_UART3		(NR_IRQS_LEGACY + 15)
+#define INT_TIMER3		(NR_IRQS_LEGACY + 16)
+#define INT_DMA_CH0_6		(NR_IRQS_LEGACY + 19)
+#define INT_DMA_CH1_7		(NR_IRQS_LEGACY + 20)
+#define INT_DMA_CH2_8		(NR_IRQS_LEGACY + 21)
+#define INT_DMA_CH3		(NR_IRQS_LEGACY + 22)
+#define INT_DMA_CH4		(NR_IRQS_LEGACY + 23)
+#define INT_DMA_CH5		(NR_IRQS_LEGACY + 24)
+#define INT_TIMER1		(NR_IRQS_LEGACY + 26)
+#define INT_WD_TIMER		(NR_IRQS_LEGACY + 27)
+#define INT_BRIDGE_PUB		(NR_IRQS_LEGACY + 28)
+#define INT_TIMER2		(NR_IRQS_LEGACY + 30)
+#define INT_LCD_CTRL		(NR_IRQS_LEGACY + 31)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ	(NR_IRQS_LEGACY + 0)
+#define INT_1510_RES2		(NR_IRQS_LEGACY + 2)
+#define INT_1510_SPI_TX		(NR_IRQS_LEGACY + 4)
+#define INT_1510_SPI_RX		(NR_IRQS_LEGACY + 5)
+#define INT_1510_DSP_MAILBOX1	(NR_IRQS_LEGACY + 10)
+#define INT_1510_DSP_MAILBOX2	(NR_IRQS_LEGACY + 11)
+#define INT_1510_RES12		(NR_IRQS_LEGACY + 12)
+#define INT_1510_LB_MMU		(NR_IRQS_LEGACY + 17)
+#define INT_1510_RES18		(NR_IRQS_LEGACY + 18)
+#define INT_1510_LOCAL_BUS	(NR_IRQS_LEGACY + 29)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ	INT_1510_IH2_IRQ
+#define INT_1610_IH2_FIQ	(NR_IRQS_LEGACY + 2)
+#define INT_1610_McBSP2_TX	(NR_IRQS_LEGACY + 4)
+#define INT_1610_McBSP2_RX	(NR_IRQS_LEGACY + 5)
+#define INT_1610_DSP_MAILBOX1	(NR_IRQS_LEGACY + 10)
+#define INT_1610_DSP_MAILBOX2	(NR_IRQS_LEGACY + 11)
+#define INT_1610_LCD_LINE	(NR_IRQS_LEGACY + 12)
+#define INT_1610_GPTIMER1	(NR_IRQS_LEGACY + 17)
+#define INT_1610_GPTIMER2	(NR_IRQS_LEGACY + 18)
+#define INT_1610_SSR_FIFO_0	(NR_IRQS_LEGACY + 29)
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
+ */
+#define INT_7XX_IH2_FIQ		(NR_IRQS_LEGACY + 0)
+#define INT_7XX_IH2_IRQ		(NR_IRQS_LEGACY + 1)
+#define INT_7XX_USB_NON_ISO	(NR_IRQS_LEGACY + 2)
+#define INT_7XX_USB_ISO		(NR_IRQS_LEGACY + 3)
+#define INT_7XX_ICR		(NR_IRQS_LEGACY + 4)
+#define INT_7XX_EAC		(NR_IRQS_LEGACY + 5)
+#define INT_7XX_GPIO_BANK1	(NR_IRQS_LEGACY + 6)
+#define INT_7XX_GPIO_BANK2	(NR_IRQS_LEGACY + 7)
+#define INT_7XX_GPIO_BANK3	(NR_IRQS_LEGACY + 8)
+#define INT_7XX_McBSP2TX	(NR_IRQS_LEGACY + 10)
+#define INT_7XX_McBSP2RX	(NR_IRQS_LEGACY + 11)
+#define INT_7XX_McBSP2RX_OVF	(NR_IRQS_LEGACY + 12)
+#define INT_7XX_LCD_LINE	(NR_IRQS_LEGACY + 14)
+#define INT_7XX_GSM_PROTECT	(NR_IRQS_LEGACY + 15)
+#define INT_7XX_TIMER3		(NR_IRQS_LEGACY + 16)
+#define INT_7XX_GPIO_BANK5	(NR_IRQS_LEGACY + 17)
+#define INT_7XX_GPIO_BANK6	(NR_IRQS_LEGACY + 18)
+#define INT_7XX_SPGIO_WR	(NR_IRQS_LEGACY + 29)
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE		(NR_IRQS_LEGACY + 32)
+
+#define INT_KEYBOARD		(1 + IH2_BASE)
+#define INT_uWireTX		(2 + IH2_BASE)
+#define INT_uWireRX		(3 + IH2_BASE)
+#define INT_I2C			(4 + IH2_BASE)
+#define INT_MPUIO		(5 + IH2_BASE)
+#define INT_USB_HHC_1		(6 + IH2_BASE)
+#define INT_McBSP3TX		(10 + IH2_BASE)
+#define INT_McBSP3RX		(11 + IH2_BASE)
+#define INT_McBSP1TX		(12 + IH2_BASE)
+#define INT_McBSP1RX		(13 + IH2_BASE)
+#define INT_UART1		(14 + IH2_BASE)
+#define INT_UART2		(15 + IH2_BASE)
+#define INT_BT_MCSI1TX		(16 + IH2_BASE)
+#define INT_BT_MCSI1RX		(17 + IH2_BASE)
+#define INT_SOSSI_MATCH		(19 + IH2_BASE)
+#define INT_USB_W2FC		(20 + IH2_BASE)
+#define INT_1WIRE		(21 + IH2_BASE)
+#define INT_OS_TIMER		(22 + IH2_BASE)
+#define INT_MMC			(23 + IH2_BASE)
+#define INT_GAUGE_32K		(24 + IH2_BASE)
+#define INT_RTC_TIMER		(25 + IH2_BASE)
+#define INT_RTC_ALARM		(26 + IH2_BASE)
+#define INT_MEM_STICK		(27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU	(28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC		(0 + IH2_BASE)
+#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
+#define INT_1610_USB_OTG	(8 + IH2_BASE)
+#define INT_1610_SoSSI		(9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
+#define INT_1610_DSP_MMU	(28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
+#define INT_1610_STI		(32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
+#define INT_1610_GPTIMER3	(34 + IH2_BASE)
+#define INT_1610_GPTIMER4	(35 + IH2_BASE)
+#define INT_1610_GPTIMER5	(36 + IH2_BASE)
+#define INT_1610_GPTIMER6	(37 + IH2_BASE)
+#define INT_1610_GPTIMER7	(38 + IH2_BASE)
+#define INT_1610_GPTIMER8	(39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
+#define INT_1610_MMC2		(42 + IH2_BASE)
+#define INT_1610_CF		(43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
+#define INT_1610_SPI		(49 + IH2_BASE)
+#define INT_1610_DMA_CH6	(53 + IH2_BASE)
+#define INT_1610_DMA_CH7	(54 + IH2_BASE)
+#define INT_1610_DMA_CH8	(55 + IH2_BASE)
+#define INT_1610_DMA_CH9	(56 + IH2_BASE)
+#define INT_1610_DMA_CH10	(57 + IH2_BASE)
+#define INT_1610_DMA_CH11	(58 + IH2_BASE)
+#define INT_1610_DMA_CH12	(59 + IH2_BASE)
+#define INT_1610_DMA_CH13	(60 + IH2_BASE)
+#define INT_1610_DMA_CH14	(61 + IH2_BASE)
+#define INT_1610_DMA_CH15	(62 + IH2_BASE)
+#define INT_1610_NAND		(63 + IH2_BASE)
+#define INT_1610_SHA1MD5	(91 + IH2_BASE)
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
+ */
+#define INT_7XX_HW_ERRORS	(0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_7XX_CFCD		(2 + IH2_BASE)
+#define INT_7XX_CFIREQ		(3 + IH2_BASE)
+#define INT_7XX_I2C		(4 + IH2_BASE)
+#define INT_7XX_PCC		(5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1	(7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI	(8 + IH2_BASE)
+#define INT_7XX_VLYNQ		(9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_7XX_McBSP1TX	(11 + IH2_BASE)
+#define INT_7XX_McBSP1RX	(12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_7XX_MCSI		(16 + IH2_BASE)
+#define INT_7XX_uWireTX		(17 + IH2_BASE)
+#define INT_7XX_uWireRX		(18 + IH2_BASE)
+#define INT_7XX_SMC_CD		(19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ	(20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_7XX_TIMER32K	(22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO	(23 + IH2_BASE)
+#define INT_7XX_UPLD		(24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1	(27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2	(28 + IH2_BASE)
+#define INT_7XX_USB_GENI	(29 + IH2_BASE)
+#define INT_7XX_USB_OTG		(30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF	(31 + IH2_BASE)
+#define INT_7XX_RNG		(32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5	(36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2	(37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE	(38 + IH2_BASE)
+#define INT_7XX_MPUIO		(39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_7XX_DMA_CH6		(53 + IH2_BASE)
+#define INT_7XX_DMA_CH7		(54 + IH2_BASE)
+#define INT_7XX_DMA_CH8		(55 + IH2_BASE)
+#define INT_7XX_DMA_CH9		(56 + IH2_BASE)
+#define INT_7XX_DMA_CH10	(57 + IH2_BASE)
+#define INT_7XX_DMA_CH11	(58 + IH2_BASE)
+#define INT_7XX_DMA_CH12	(59 + IH2_BASE)
+#define INT_7XX_DMA_CH13	(60 + IH2_BASE)
+#define INT_7XX_DMA_CH14	(61 + IH2_BASE)
+#define INT_7XX_DMA_CH15	(62 + IH2_BASE)
+#define INT_7XX_NAND		(63 + IH2_BASE)
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES	192
+#define IH_GPIO_BASE		(128 + IH2_BASE)
+#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
+
+#define OMAP_IRQ_BIT(irq)	(1 << ((irq - NR_IRQS_LEGACY) % 32))
+
+#ifdef CONFIG_FIQ
+#define FIQ_START		1024
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
deleted file mode 100644
index a72ac0c02b4f..000000000000
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ /dev/null
@@ -1,441 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/lcd_dma.c
- *
- * Extracted from arch/arm/plat-omap/dma.c
- * Copyright (C) 2003 - 2008 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
- * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
- * Graphics DMA and LCD DMA graphics tranformations
- * by Imre Deak <imre.deak@nokia.com>
- * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
- * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
- * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * Support functions for the OMAP internal DMA channels.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <linux/omap-dma.h>
-
-#include <mach/hardware.h>
-#include <mach/lcdc.h>
-
-int omap_lcd_dma_running(void)
-{
-	/*
-	 * On OMAP1510, internal LCD controller will start the transfer
-	 * when it gets enabled, so assume DMA running if LCD enabled.
-	 */
-	if (cpu_is_omap15xx())
-		if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
-			return 1;
-
-	/* Check if LCD DMA is running */
-	if (cpu_is_omap16xx())
-		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
-			return 1;
-
-	return 0;
-}
-
-static struct lcd_dma_info {
-	spinlock_t lock;
-	int reserved;
-	void (*callback)(u16 status, void *data);
-	void *cb_data;
-
-	int active;
-	unsigned long addr;
-	int rotate, data_type, xres, yres;
-	int vxres;
-	int mirror;
-	int xscale, yscale;
-	int ext_ctrl;
-	int src_port;
-	int single_transfer;
-} lcd_dma;
-
-void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
-			 int data_type)
-{
-	lcd_dma.addr = addr;
-	lcd_dma.data_type = data_type;
-	lcd_dma.xres = fb_xres;
-	lcd_dma.yres = fb_yres;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1);
-
-void omap_set_lcd_dma_ext_controller(int external)
-{
-	lcd_dma.ext_ctrl = external;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
-
-void omap_set_lcd_dma_single_transfer(int single)
-{
-	lcd_dma.single_transfer = single;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
-
-void omap_set_lcd_dma_b1_rotation(int rotate)
-{
-	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
-		BUG();
-		return;
-	}
-	lcd_dma.rotate = rotate;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
-
-void omap_set_lcd_dma_b1_mirror(int mirror)
-{
-	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.mirror = mirror;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
-
-void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
-{
-	if (cpu_is_omap15xx()) {
-		pr_err("DMA virtual resolution is not supported in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.vxres = vxres;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
-
-void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
-{
-	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.xscale = xscale;
-	lcd_dma.yscale = yscale;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
-
-static void set_b1_regs(void)
-{
-	unsigned long top, bottom;
-	int es;
-	u16 w;
-	unsigned long en, fn;
-	long ei, fi;
-	unsigned long vxres;
-	unsigned int xscale, yscale;
-
-	switch (lcd_dma.data_type) {
-	case OMAP_DMA_DATA_TYPE_S8:
-		es = 1;
-		break;
-	case OMAP_DMA_DATA_TYPE_S16:
-		es = 2;
-		break;
-	case OMAP_DMA_DATA_TYPE_S32:
-		es = 4;
-		break;
-	default:
-		BUG();
-		return;
-	}
-
-	vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
-	xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
-	yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
-	BUG_ON(vxres < lcd_dma.xres);
-
-#define PIXADDR(x, y) (lcd_dma.addr +					\
-		((y) * vxres * yscale + (x) * xscale) * es)
-#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
-
-	switch (lcd_dma.rotate) {
-	case 0:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(0, 0);
-			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			/* 1510 DMA requires the bottom address to be 2 more
-			 * than the actual last memory access location. */
-			if (cpu_is_omap15xx() &&
-				lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
-					bottom += 2;
-			ei = PIXSTEP(0, 0, 1, 0);
-			fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
-		} else {
-			top = PIXADDR(lcd_dma.xres - 1, 0);
-			bottom = PIXADDR(0, lcd_dma.yres - 1);
-			ei = PIXSTEP(1, 0, 0, 0);
-			fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
-		}
-		en = lcd_dma.xres;
-		fn = lcd_dma.yres;
-		break;
-	case 90:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(0, lcd_dma.yres - 1);
-			bottom = PIXADDR(lcd_dma.xres - 1, 0);
-			ei = PIXSTEP(0, 1, 0, 0);
-			fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
-		} else {
-			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			bottom = PIXADDR(0, 0);
-			ei = PIXSTEP(0, 1, 0, 0);
-			fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
-		}
-		en = lcd_dma.yres;
-		fn = lcd_dma.xres;
-		break;
-	case 180:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			bottom = PIXADDR(0, 0);
-			ei = PIXSTEP(1, 0, 0, 0);
-			fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
-		} else {
-			top = PIXADDR(0, lcd_dma.yres - 1);
-			bottom = PIXADDR(lcd_dma.xres - 1, 0);
-			ei = PIXSTEP(0, 0, 1, 0);
-			fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
-		}
-		en = lcd_dma.xres;
-		fn = lcd_dma.yres;
-		break;
-	case 270:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(lcd_dma.xres - 1, 0);
-			bottom = PIXADDR(0, lcd_dma.yres - 1);
-			ei = PIXSTEP(0, 0, 0, 1);
-			fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
-		} else {
-			top = PIXADDR(0, 0);
-			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			ei = PIXSTEP(0, 0, 0, 1);
-			fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
-		}
-		en = lcd_dma.yres;
-		fn = lcd_dma.xres;
-		break;
-	default:
-		BUG();
-		return;	/* Suppress warning about uninitialized vars */
-	}
-
-	if (cpu_is_omap15xx()) {
-		omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
-		omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
-		omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
-		omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
-
-		return;
-	}
-
-	/* 1610 regs */
-	omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
-	omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
-	omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
-	omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
-
-	omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
-	omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CSDP);
-	w &= ~0x03;
-	w |= lcd_dma.data_type;
-	omap_writew(w, OMAP1610_DMA_LCD_CSDP);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	/* Always set the source port as SDRAM for now*/
-	w &= ~(0x03 << 6);
-	if (lcd_dma.callback != NULL)
-		w |= 1 << 1;		/* Block interrupt enable */
-	else
-		w &= ~(1 << 1);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-
-	if (!(lcd_dma.rotate || lcd_dma.mirror ||
-	      lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	/* Set the double-indexed addressing mode */
-	w |= (0x03 << 12);
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-
-	omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
-	omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
-	omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
-}
-
-static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
-{
-	u16 w;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	if (unlikely(!(w & (1 << 3)))) {
-		printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
-		return IRQ_NONE;
-	}
-	/* Ack the IRQ */
-	w |= (1 << 3);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-	lcd_dma.active = 0;
-	if (lcd_dma.callback != NULL)
-		lcd_dma.callback(w, lcd_dma.cb_data);
-
-	return IRQ_HANDLED;
-}
-
-int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
-			 void *data)
-{
-	spin_lock_irq(&lcd_dma.lock);
-	if (lcd_dma.reserved) {
-		spin_unlock_irq(&lcd_dma.lock);
-		printk(KERN_ERR "LCD DMA channel already reserved\n");
-		BUG();
-		return -EBUSY;
-	}
-	lcd_dma.reserved = 1;
-	spin_unlock_irq(&lcd_dma.lock);
-	lcd_dma.callback = callback;
-	lcd_dma.cb_data = data;
-	lcd_dma.active = 0;
-	lcd_dma.single_transfer = 0;
-	lcd_dma.rotate = 0;
-	lcd_dma.vxres = 0;
-	lcd_dma.mirror = 0;
-	lcd_dma.xscale = 0;
-	lcd_dma.yscale = 0;
-	lcd_dma.ext_ctrl = 0;
-	lcd_dma.src_port = 0;
-
-	return 0;
-}
-EXPORT_SYMBOL(omap_request_lcd_dma);
-
-void omap_free_lcd_dma(void)
-{
-	spin_lock(&lcd_dma.lock);
-	if (!lcd_dma.reserved) {
-		spin_unlock(&lcd_dma.lock);
-		printk(KERN_ERR "LCD DMA is not reserved\n");
-		BUG();
-		return;
-	}
-	if (!cpu_is_omap15xx())
-		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
-			    OMAP1610_DMA_LCD_CCR);
-	lcd_dma.reserved = 0;
-	spin_unlock(&lcd_dma.lock);
-}
-EXPORT_SYMBOL(omap_free_lcd_dma);
-
-void omap_enable_lcd_dma(void)
-{
-	u16 w;
-
-	/*
-	 * Set the Enable bit only if an external controller is
-	 * connected. Otherwise the OMAP internal controller will
-	 * start the transfer when it gets enabled.
-	 */
-	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	w |= 1 << 8;
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-
-	lcd_dma.active = 1;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	w |= 1 << 7;
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-}
-EXPORT_SYMBOL(omap_enable_lcd_dma);
-
-void omap_setup_lcd_dma(void)
-{
-	BUG_ON(lcd_dma.active);
-	if (!cpu_is_omap15xx()) {
-		/* Set some reasonable defaults */
-		omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
-		omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
-		omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
-	}
-	set_b1_regs();
-	if (!cpu_is_omap15xx()) {
-		u16 w;
-
-		w = omap_readw(OMAP1610_DMA_LCD_CCR);
-		/*
-		 * If DMA was already active set the end_prog bit to have
-		 * the programmed register set loaded into the active
-		 * register set.
-		 */
-		w |= 1 << 11;		/* End_prog */
-		if (!lcd_dma.single_transfer)
-			w |= (3 << 8);	/* Auto_init, repeat */
-		omap_writew(w, OMAP1610_DMA_LCD_CCR);
-	}
-}
-EXPORT_SYMBOL(omap_setup_lcd_dma);
-
-void omap_stop_lcd_dma(void)
-{
-	u16 w;
-
-	lcd_dma.active = 0;
-	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	w &= ~(1 << 7);
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	w &= ~(1 << 8);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-}
-EXPORT_SYMBOL(omap_stop_lcd_dma);
-
-static int __init omap_init_lcd_dma(void)
-{
-	int r;
-
-	if (!cpu_class_is_omap1())
-		return -ENODEV;
-
-	if (cpu_is_omap16xx()) {
-		u16 w;
-
-		/* this would prevent OMAP sleep */
-		w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-		w &= ~(1 << 8);
-		omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-	}
-
-	spin_lock_init(&lcd_dma.lock);
-
-	r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
-			"LCD DMA", NULL);
-	if (r != 0)
-		pr_err("unable to request IRQ for LCD DMA (error %d)\n", r);
-
-	return r;
-}
-
-arch_initcall(omap_init_lcd_dma);
-
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index f36c34f47f11..37863bdce9ea 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -15,14 +15,13 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-
 #include <linux/omap-dma.h>
-#include <mach/mux.h>
-#include "soc.h"
+#include <linux/soc/ti/omap1-io.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 
-#include <mach/irqs.h>
-
+#include "mux.h"
+#include "soc.h"
+#include "irqs.h"
 #include "iomap.h"
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
@@ -44,8 +43,8 @@ static void omap1_mcbsp_request(unsigned int id)
 			api_clk = clk_get(NULL, "api_ck");
 			dsp_clk = clk_get(NULL, "dsp_ck");
 			if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
-				clk_enable(api_clk);
-				clk_enable(dsp_clk);
+				clk_prepare_enable(api_clk);
+				clk_prepare_enable(dsp_clk);
 
 				/*
 				 * DSP external peripheral reset
@@ -63,11 +62,11 @@ static void omap1_mcbsp_free(unsigned int id)
 	if (id == 0 || id == 2) {
 		if (--dsp_use == 0) {
 			if (!IS_ERR(api_clk)) {
-				clk_disable(api_clk);
+				clk_disable_unprepare(api_clk);
 				clk_put(api_clk);
 			}
 			if (!IS_ERR(dsp_clk)) {
-				clk_disable(dsp_clk);
+				clk_disable_unprepare(dsp_clk);
 				clk_put(dsp_clk);
 			}
 		}
@@ -90,84 +89,6 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 #define OMAP1610_MCBSP2_BASE	0xfffb1000
 #define OMAP1610_MCBSP3_BASE	0xe1017000
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-struct resource omap7xx_mcbsp_res[][6] = {
-	{
-		{
-			.start = OMAP7XX_MCBSP1_BASE,
-			.end   = OMAP7XX_MCBSP1_BASE + SZ_256,
-			.flags = IORESOURCE_MEM,
-		},
-		{
-			.name  = "rx",
-			.start = INT_7XX_McBSP1RX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "tx",
-			.start = INT_7XX_McBSP1TX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "rx",
-			.start = 9,
-			.flags = IORESOURCE_DMA,
-		},
-		{
-			.name  = "tx",
-			.start = 8,
-			.flags = IORESOURCE_DMA,
-		},
-	},
-	{
-		{
-			.start = OMAP7XX_MCBSP2_BASE,
-			.end   = OMAP7XX_MCBSP2_BASE + SZ_256,
-			.flags = IORESOURCE_MEM,
-		},
-		{
-			.name  = "rx",
-			.start = INT_7XX_McBSP2RX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "tx",
-			.start = INT_7XX_McBSP2TX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "rx",
-			.start = 11,
-			.flags = IORESOURCE_DMA,
-		},
-		{
-			.name  = "tx",
-			.start = 10,
-			.flags = IORESOURCE_DMA,
-		},
-	},
-};
-
-#define omap7xx_mcbsp_res_0		omap7xx_mcbsp_res[0]
-
-static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
-	{
-		.ops		= &omap1_mcbsp_ops,
-	},
-	{
-		.ops		= &omap1_mcbsp_ops,
-	},
-};
-#define OMAP7XX_MCBSP_RES_SZ		ARRAY_SIZE(omap7xx_mcbsp_res[1])
-#define OMAP7XX_MCBSP_COUNT		ARRAY_SIZE(omap7xx_mcbsp_res)
-#else
-#define omap7xx_mcbsp_res_0		NULL
-#define omap7xx_mcbsp_pdata		NULL
-#define OMAP7XX_MCBSP_RES_SZ		0
-#define OMAP7XX_MCBSP_COUNT		0
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
 struct resource omap15xx_mcbsp_res[][6] = {
 	{
 		{
@@ -267,14 +188,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 };
 #define OMAP15XX_MCBSP_RES_SZ		ARRAY_SIZE(omap15xx_mcbsp_res[1])
 #define OMAP15XX_MCBSP_COUNT		ARRAY_SIZE(omap15xx_mcbsp_res)
-#else
-#define omap15xx_mcbsp_res_0		NULL
-#define omap15xx_mcbsp_pdata		NULL
-#define OMAP15XX_MCBSP_RES_SZ		0
-#define OMAP15XX_MCBSP_COUNT		0
-#endif
 
-#ifdef CONFIG_ARCH_OMAP16XX
 struct resource omap16xx_mcbsp_res[][6] = {
 	{
 		{
@@ -374,12 +288,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 };
 #define OMAP16XX_MCBSP_RES_SZ		ARRAY_SIZE(omap16xx_mcbsp_res[1])
 #define OMAP16XX_MCBSP_COUNT		ARRAY_SIZE(omap16xx_mcbsp_res)
-#else
-#define omap16xx_mcbsp_res_0		NULL
-#define omap16xx_mcbsp_pdata		NULL
-#define OMAP16XX_MCBSP_RES_SZ		0
-#define OMAP16XX_MCBSP_COUNT		0
-#endif
 
 static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
 			struct omap_mcbsp_platform_data *config, int size)
@@ -419,12 +327,6 @@ static int __init omap1_mcbsp_init(void)
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
 
-	if (cpu_is_omap7xx())
-		omap_mcbsp_register_board_cfg(omap7xx_mcbsp_res_0,
-					OMAP7XX_MCBSP_RES_SZ,
-					omap7xx_mcbsp_pdata,
-					OMAP7XX_MCBSP_COUNT);
-
 	if (cpu_is_omap15xx())
 		omap_mcbsp_register_board_cfg(omap15xx_mcbsp_res_0,
 					OMAP15XX_MCBSP_RES_SZ,
diff --git a/arch/arm/mach-omap1/mtd-xip.h b/arch/arm/mach-omap1/mtd-xip.h
new file mode 100644
index 000000000000..cbeda46dd526
--- /dev/null
+++ b/arch/arm/mach-omap1/mtd-xip.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * MTD primitives for XIP support. Architecture specific functions.
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ *
+ * Author: Vladimir Barinov <vbarinov@embeddedalley.com>
+ *
+ * (c) 2005 MontaVista Software, Inc.
+ */
+
+#ifndef __ARCH_OMAP_MTD_XIP_H__
+#define __ARCH_OMAP_MTD_XIP_H__
+
+#include "hardware.h"
+#include <linux/soc/ti/omap1-io.h>
+#define OMAP_MPU_TIMER_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER_OFFSET	0x100
+
+typedef struct {
+	u32 cntl;			/* CNTL_TIMER, R/W */
+	u32 load_tim;			/* LOAD_TIM,   W */
+	u32 read_tim;			/* READ_TIM,   R */
+} xip_omap_mpu_timer_regs_t;
+
+#define xip_omap_mpu_timer_base(n)					\
+((volatile xip_omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+	(n)*OMAP_MPU_TIMER_OFFSET))
+
+static inline unsigned long xip_omap_mpu_timer_read(int nr)
+{
+	volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
+	return timer->read_tim;
+}
+
+#define xip_irqpending()	\
+	(omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
+#define xip_currtime()		(~xip_omap_mpu_timer_read(0))
+
+/*
+ * It's permitted to do approximation for xip_elapsed_since macro
+ * (see linux/mtd/xip.h)
+ */
+
+#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period.  This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle()  asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
+
+#endif /* __ARCH_OMAP_MTD_XIP_H__ */
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 972665bf52d6..4456fbc8aa3d 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -12,61 +12,15 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <linux/soc/ti/omap1-io.h>
 
-#include <mach/hardware.h>
-
-#include <mach/mux.h>
+#include "hardware.h"
+#include "mux.h"
 
 #ifdef CONFIG_OMAP_MUX
 
 static struct omap_mux_cfg arch_mux_cfg;
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-static struct pin_config omap7xx_pins[] = {
-MUX_CFG_7XX("E2_7XX_KBR0",        12,   21,    0,   20,   1, 0)
-MUX_CFG_7XX("J7_7XX_KBR1",        12,   25,    0,   24,   1, 0)
-MUX_CFG_7XX("E1_7XX_KBR2",        12,   29,    0,   28,   1, 0)
-MUX_CFG_7XX("F3_7XX_KBR3",        13,    1,    0,    0,   1, 0)
-MUX_CFG_7XX("D2_7XX_KBR4",        13,    5,    0,    4,   1, 0)
-MUX_CFG_7XX("C2_7XX_KBC0",        13,    9,    0,    8,   1, 0)
-MUX_CFG_7XX("D3_7XX_KBC1",        13,   13,    0,   12,   1, 0)
-MUX_CFG_7XX("E4_7XX_KBC2",        13,   17,    0,   16,   1, 0)
-MUX_CFG_7XX("F4_7XX_KBC3",        13,   21,    0,   20,   1, 0)
-MUX_CFG_7XX("E3_7XX_KBC4",        13,   25,    0,   24,   1, 0)
-
-MUX_CFG_7XX("AA17_7XX_USB_DM",     2,   21,    0,   20,   0, 0)
-MUX_CFG_7XX("W16_7XX_USB_PU_EN",   2,   25,    0,   24,   0, 0)
-MUX_CFG_7XX("W17_7XX_USB_VBUSI",   2,   29,    6,   28,   1, 0)
-MUX_CFG_7XX("W18_7XX_USB_DMCK_OUT",3,    3,    1,    2,   0, 0)
-MUX_CFG_7XX("W19_7XX_USB_DCRST",   3,    7,    1,    6,   0, 0)
-
-/* MMC Pins */
-MUX_CFG_7XX("MMC_7XX_CMD",         2,    9,    0,    8,   1, 0)
-MUX_CFG_7XX("MMC_7XX_CLK",         2,   13,    0,   12,   1, 0)
-MUX_CFG_7XX("MMC_7XX_DAT0",        2,   17,    0,   16,   1, 0)
-
-/* I2C interface */
-MUX_CFG_7XX("I2C_7XX_SCL",         5,    1,    0,    0,   1, 0)
-MUX_CFG_7XX("I2C_7XX_SDA",         5,    5,    0,    0,   1, 0)
-
-/* SPI pins */
-MUX_CFG_7XX("SPI_7XX_1",           6,    5,    4,    4,   1, 0)
-MUX_CFG_7XX("SPI_7XX_2",           6,    9,    4,    8,   1, 0)
-MUX_CFG_7XX("SPI_7XX_3",           6,   13,    4,   12,   1, 0)
-MUX_CFG_7XX("SPI_7XX_4",           6,   17,    4,   16,   1, 0)
-MUX_CFG_7XX("SPI_7XX_5",           8,   25,    0,   24,   0, 0)
-MUX_CFG_7XX("SPI_7XX_6",           9,    5,    0,    4,   0, 0)
-
-/* UART pins */
-MUX_CFG_7XX("UART_7XX_1",          3,   21,    0,   20,   0, 0)
-MUX_CFG_7XX("UART_7XX_2",          8,    1,    6,    0,   0, 0)
-};
-#define OMAP7XX_PINS_SZ		ARRAY_SIZE(omap7xx_pins)
-#else
-#define omap7xx_pins		NULL
-#define OMAP7XX_PINS_SZ		0
-#endif	/* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
-
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
 static struct pin_config omap1xxx_pins[] = {
 /*
@@ -489,12 +443,6 @@ EXPORT_SYMBOL(omap_cfg_reg);
 
 int __init omap1_mux_init(void)
 {
-	if (cpu_is_omap7xx()) {
-		arch_mux_cfg.pins	= omap7xx_pins;
-		arch_mux_cfg.size	= OMAP7XX_PINS_SZ;
-		arch_mux_cfg.cfg_reg	= omap1_cfg_reg;
-	}
-
 	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
 		arch_mux_cfg.pins	= omap1xxx_pins;
 		arch_mux_cfg.size	= OMAP1XXX_PINS_SZ;
diff --git a/arch/arm/mach-omap1/mux.h b/arch/arm/mach-omap1/mux.h
new file mode 100644
index 000000000000..3e7ed3348a55
--- /dev/null
+++ b/arch/arm/mach-omap1/mux.h
@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ *	 For example, W8_1610_MMC2_DAT0, where:
+ *	 - W8	     = ball
+ *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
+ *	 - MMC2_DAT0 = function
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#include <linux/soc/ti/omap1-mux.h>
+
+#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
+
+#ifdef	CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+					.mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
+					.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
+					.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status)	.pull_name = "OMAP7XX_IO_CONF_"#reg, \
+					.pull_reg = OMAP7XX_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status)	.pull_reg = OMAP7XX_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
+		pull_reg, pull_bit, pull_status,	\
+		pu_pd_reg, pu_pd_status, debug_status)	\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG(mux_reg, mode_offset, mode)		\
+	PULL_REG(pull_reg, pull_bit, pull_status)	\
+	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
+},
+
+
+/*
+ * OMAP730/850 has a slightly different config for the pin mux.
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
+ *   not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is in the same register
+ *   as mux config
+ */
+#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode,	\
+		   pull_bit, pull_status, debug_status)\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG_7XX(mux_reg, mode_offset, mode)		\
+	PULL_REG_7XX(mux_reg, pull_bit, pull_status)	\
+	PU_PD_REG(NA, 0)		\
+},
+
+struct pin_config {
+	char 			*name;
+	const unsigned int 	mux_reg;
+	unsigned char		debug;
+
+	const unsigned char mask_offset;
+	const unsigned char mask;
+
+	const char *pull_name;
+	const unsigned int pull_reg;
+	const unsigned char pull_val;
+	const unsigned char pull_bit;
+
+	const char *pu_pd_name;
+	const unsigned int pu_pd_reg;
+	const unsigned char pu_pd_val;
+
+#if	defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+	const char *mux_reg_name;
+#endif
+
+};
+
+struct omap_mux_cfg {
+	struct pin_config	*pins;
+	unsigned long		size;
+	int			(*cfg_reg)(const struct pin_config *cfg);
+};
+
+#ifdef	CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap1_mux_init(void);
+extern int omap_mux_register(struct omap_mux_cfg *);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap1_mux_init(void) { return 0; }
+#endif
+
+extern int omap2_mux_init(void);
+
+#endif
diff --git a/arch/arm/mach-omap1/ocpi.c b/arch/arm/mach-omap1/ocpi.c
index 380ea2de58c1..d48f726571a4 100644
--- a/arch/arm/mach-omap1/ocpi.c
+++ b/arch/arm/mach-omap1/ocpi.c
@@ -20,9 +20,9 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/soc/ti/omap1-io.h>
 
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "common.h"
 
 #define OCPI_BASE		0xfffec320
@@ -73,7 +73,7 @@ static int __init omap_ocpi_init(void)
 	if (IS_ERR(ocpi_ck))
 		return PTR_ERR(ocpi_ck);
 
-	clk_enable(ocpi_ck);
+	clk_prepare_enable(ocpi_ck);
 	ocpi_enable();
 	pr_info("OMAP OCPI interconnect driver loaded\n");
 
@@ -87,7 +87,7 @@ static void __exit omap_ocpi_exit(void)
 	if (!cpu_is_omap16xx())
 		return;
 
-	clk_disable(ocpi_ck);
+	clk_disable_unprepare(ocpi_ck);
 	clk_put(ocpi_ck);
 }
 
diff --git a/arch/arm/mach-omap1/omap-dma.c b/arch/arm/mach-omap1/omap-dma.c
new file mode 100644
index 000000000000..9ee472f8ead1
--- /dev/null
+++ b/arch/arm/mach-omap1/omap-dma.c
@@ -0,0 +1,882 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/plat-omap/dma.c
+ *
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
+ * Graphics DMA and LCD DMA graphics tranformations
+ * by Imre Deak <imre.deak@nokia.com>
+ * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
+ * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
+ * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Support functions for the OMAP internal DMA channels.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
+ * Converted DMA library into DMA platform driver.
+ *	- G, Manjunath Kondaiah <manjugk@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <linux/omap-dma.h>
+
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-soc.h>
+
+#include "tc.h"
+
+/*
+ * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
+ * channels that an instance of the SDMA IP block can support.  Used
+ * to size arrays.  (The actual maximum on a particular SoC may be less
+ * than this -- for example, OMAP1 SDMA instances only support 17 logical
+ * DMA channels.)
+ */
+#define MAX_LOGICAL_DMA_CH_COUNT		32
+
+#undef DEBUG
+
+#define OMAP_DMA_ACTIVE			0x01
+
+#define OMAP_FUNC_MUX_ARM_BASE		(0xfffe1000 + 0xec)
+
+static struct omap_system_dma_plat_info *p;
+static struct omap_dma_dev_attr *d;
+static int enable_1510_mode;
+static u32 errata;
+
+struct dma_link_info {
+	int *linked_dmach_q;
+	int no_of_lchs_linked;
+
+	int q_count;
+	int q_tail;
+	int q_head;
+
+	int chain_state;
+	int chain_mode;
+
+};
+
+static int dma_lch_count;
+static int dma_chan_count;
+static int omap_dma_reserve_channels;
+
+static DEFINE_SPINLOCK(dma_chan_lock);
+static struct omap_dma_lch *dma_chan;
+
+static inline void omap_disable_channel_irq(int lch)
+{
+	/* disable channel interrupts */
+	p->dma_write(0, CICR, lch);
+	/* Clear CSR */
+	p->dma_read(CSR, lch);
+}
+
+static inline void set_gdma_dev(int req, int dev)
+{
+	u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
+	int shift = ((req - 1) % 5) * 6;
+	u32 l;
+
+	l = omap_readl(reg);
+	l &= ~(0x3f << shift);
+	l |= (dev - 1) << shift;
+	omap_writel(l, reg);
+}
+
+#if IS_ENABLED(CONFIG_FB_OMAP)
+void omap_set_dma_priority(int lch, int dst_port, int priority)
+{
+	unsigned long reg;
+	u32 l;
+
+	if (dma_omap1()) {
+		switch (dst_port) {
+		case OMAP_DMA_PORT_OCP_T1:	/* FFFECC00 */
+			reg = OMAP_TC_OCPT1_PRIOR;
+			break;
+		case OMAP_DMA_PORT_OCP_T2:	/* FFFECCD0 */
+			reg = OMAP_TC_OCPT2_PRIOR;
+			break;
+		case OMAP_DMA_PORT_EMIFF:	/* FFFECC08 */
+			reg = OMAP_TC_EMIFF_PRIOR;
+			break;
+		case OMAP_DMA_PORT_EMIFS:	/* FFFECC04 */
+			reg = OMAP_TC_EMIFS_PRIOR;
+			break;
+		default:
+			BUG();
+			return;
+		}
+		l = omap_readl(reg);
+		l &= ~(0xf << 8);
+		l |= (priority & 0xf) << 8;
+		omap_writel(l, reg);
+	}
+}
+EXPORT_SYMBOL(omap_set_dma_priority);
+#endif
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+#ifdef CONFIG_ARCH_OMAP15XX
+/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
+static int omap_dma_in_1510_mode(void)
+{
+	return enable_1510_mode;
+}
+#else
+#define omap_dma_in_1510_mode()		0
+#endif
+
+void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
+				  int frame_count, int sync_mode,
+				  int dma_trigger, int src_or_dst_synch)
+{
+	u32 l;
+	u16 ccr;
+
+	l = p->dma_read(CSDP, lch);
+	l &= ~0x03;
+	l |= data_type;
+	p->dma_write(l, CSDP, lch);
+
+	ccr = p->dma_read(CCR, lch);
+	ccr &= ~(1 << 5);
+	if (sync_mode == OMAP_DMA_SYNC_FRAME)
+		ccr |= 1 << 5;
+	p->dma_write(ccr, CCR, lch);
+
+	ccr = p->dma_read(CCR2, lch);
+	ccr &= ~(1 << 2);
+	if (sync_mode == OMAP_DMA_SYNC_BLOCK)
+		ccr |= 1 << 2;
+	p->dma_write(ccr, CCR2, lch);
+	p->dma_write(elem_count, CEN, lch);
+	p->dma_write(frame_count, CFN, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_transfer_params);
+
+void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
+{
+	if (!dma_omap15xx()) {
+		u32 l;
+
+		l = p->dma_read(LCH_CTRL, lch);
+		l &= ~0x7;
+		l |= mode;
+		p->dma_write(l, LCH_CTRL, lch);
+	}
+}
+EXPORT_SYMBOL(omap_set_dma_channel_mode);
+
+/* Note that src_port is only for omap1 */
+void omap_set_dma_src_params(int lch, int src_port, int src_amode,
+			     unsigned long src_start,
+			     int src_ei, int src_fi)
+{
+	u32 l;
+	u16 w;
+
+	w = p->dma_read(CSDP, lch);
+	w &= ~(0x1f << 2);
+	w |= src_port << 2;
+	p->dma_write(w, CSDP, lch);
+
+	l = p->dma_read(CCR, lch);
+	l &= ~(0x03 << 12);
+	l |= src_amode << 12;
+	p->dma_write(l, CCR, lch);
+
+	p->dma_write(src_start, CSSA, lch);
+
+	p->dma_write(src_ei, CSEI, lch);
+	p->dma_write(src_fi, CSFI, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_src_params);
+
+void omap_set_dma_src_data_pack(int lch, int enable)
+{
+	u32 l;
+
+	l = p->dma_read(CSDP, lch);
+	l &= ~(1 << 6);
+	if (enable)
+		l |= (1 << 6);
+	p->dma_write(l, CSDP, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_src_data_pack);
+
+void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
+{
+	unsigned int burst = 0;
+	u32 l;
+
+	l = p->dma_read(CSDP, lch);
+	l &= ~(0x03 << 7);
+
+	switch (burst_mode) {
+	case OMAP_DMA_DATA_BURST_DIS:
+		break;
+	case OMAP_DMA_DATA_BURST_4:
+		burst = 0x2;
+		break;
+	case OMAP_DMA_DATA_BURST_8:
+		/*
+		 * not supported by current hardware on OMAP1
+		 * w |= (0x03 << 7);
+		 */
+		fallthrough;
+	case OMAP_DMA_DATA_BURST_16:
+		/* OMAP1 don't support burst 16 */
+		fallthrough;
+	default:
+		BUG();
+	}
+
+	l |= (burst << 7);
+	p->dma_write(l, CSDP, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
+
+/* Note that dest_port is only for OMAP1 */
+void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
+			      unsigned long dest_start,
+			      int dst_ei, int dst_fi)
+{
+	u32 l;
+
+	l = p->dma_read(CSDP, lch);
+	l &= ~(0x1f << 9);
+	l |= dest_port << 9;
+	p->dma_write(l, CSDP, lch);
+
+	l = p->dma_read(CCR, lch);
+	l &= ~(0x03 << 14);
+	l |= dest_amode << 14;
+	p->dma_write(l, CCR, lch);
+
+	p->dma_write(dest_start, CDSA, lch);
+
+	p->dma_write(dst_ei, CDEI, lch);
+	p->dma_write(dst_fi, CDFI, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_dest_params);
+
+void omap_set_dma_dest_data_pack(int lch, int enable)
+{
+	u32 l;
+
+	l = p->dma_read(CSDP, lch);
+	l &= ~(1 << 13);
+	if (enable)
+		l |= 1 << 13;
+	p->dma_write(l, CSDP, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
+
+void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
+{
+	unsigned int burst = 0;
+	u32 l;
+
+	l = p->dma_read(CSDP, lch);
+	l &= ~(0x03 << 14);
+
+	switch (burst_mode) {
+	case OMAP_DMA_DATA_BURST_DIS:
+		break;
+	case OMAP_DMA_DATA_BURST_4:
+		burst = 0x2;
+		break;
+	case OMAP_DMA_DATA_BURST_8:
+		burst = 0x3;
+		break;
+	case OMAP_DMA_DATA_BURST_16:
+		/* OMAP1 don't support burst 16 */
+		fallthrough;
+	default:
+		printk(KERN_ERR "Invalid DMA burst mode\n");
+		BUG();
+		return;
+	}
+	l |= (burst << 14);
+	p->dma_write(l, CSDP, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
+
+static inline void omap_enable_channel_irq(int lch)
+{
+	/* Clear CSR */
+	p->dma_read(CSR, lch);
+
+	/* Enable some nice interrupts. */
+	p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch);
+}
+
+void omap_disable_dma_irq(int lch, u16 bits)
+{
+	dma_chan[lch].enabled_irqs &= ~bits;
+}
+EXPORT_SYMBOL(omap_disable_dma_irq);
+
+static inline void enable_lnk(int lch)
+{
+	u32 l;
+
+	l = p->dma_read(CLNK_CTRL, lch);
+
+	l &= ~(1 << 14);
+
+	/* Set the ENABLE_LNK bits */
+	if (dma_chan[lch].next_lch != -1)
+		l = dma_chan[lch].next_lch | (1 << 15);
+
+	p->dma_write(l, CLNK_CTRL, lch);
+}
+
+static inline void disable_lnk(int lch)
+{
+	u32 l;
+
+	l = p->dma_read(CLNK_CTRL, lch);
+
+	/* Disable interrupts */
+	omap_disable_channel_irq(lch);
+
+	/* Set the STOP_LNK bit */
+	l |= 1 << 14;
+
+	p->dma_write(l, CLNK_CTRL, lch);
+	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
+}
+#endif
+
+int omap_request_dma(int dev_id, const char *dev_name,
+		     void (*callback)(int lch, u16 ch_status, void *data),
+		     void *data, int *dma_ch_out)
+{
+	int ch, free_ch = -1;
+	unsigned long flags;
+	struct omap_dma_lch *chan;
+
+	WARN(strcmp(dev_name, "DMA engine"), "Using deprecated platform DMA API - please update to DMA engine");
+
+	spin_lock_irqsave(&dma_chan_lock, flags);
+	for (ch = 0; ch < dma_chan_count; ch++) {
+		if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
+			free_ch = ch;
+			/* Exit after first free channel found */
+			break;
+		}
+	}
+	if (free_ch == -1) {
+		spin_unlock_irqrestore(&dma_chan_lock, flags);
+		return -EBUSY;
+	}
+	chan = dma_chan + free_ch;
+	chan->dev_id = dev_id;
+
+	if (p->clear_lch_regs)
+		p->clear_lch_regs(free_ch);
+
+	spin_unlock_irqrestore(&dma_chan_lock, flags);
+
+	chan->dev_name = dev_name;
+	chan->callback = callback;
+	chan->data = data;
+	chan->flags = 0;
+
+	chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
+
+	chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
+
+	if (dma_omap16xx()) {
+		/* If the sync device is set, configure it dynamically. */
+		if (dev_id != 0) {
+			set_gdma_dev(free_ch + 1, dev_id);
+			dev_id = free_ch + 1;
+		}
+		/*
+		 * Disable the 1510 compatibility mode and set the sync device
+		 * id.
+		 */
+		p->dma_write(dev_id | (1 << 10), CCR, free_ch);
+	} else {
+		p->dma_write(dev_id, CCR, free_ch);
+	}
+
+	*dma_ch_out = free_ch;
+
+	return 0;
+}
+EXPORT_SYMBOL(omap_request_dma);
+
+void omap_free_dma(int lch)
+{
+	unsigned long flags;
+
+	if (dma_chan[lch].dev_id == -1) {
+		pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
+		       lch);
+		return;
+	}
+
+	/* Disable all DMA interrupts for the channel. */
+	omap_disable_channel_irq(lch);
+
+	/* Make sure the DMA transfer is stopped. */
+	p->dma_write(0, CCR, lch);
+
+	spin_lock_irqsave(&dma_chan_lock, flags);
+	dma_chan[lch].dev_id = -1;
+	dma_chan[lch].next_lch = -1;
+	dma_chan[lch].callback = NULL;
+	spin_unlock_irqrestore(&dma_chan_lock, flags);
+}
+EXPORT_SYMBOL(omap_free_dma);
+
+/*
+ * Clears any DMA state so the DMA engine is ready to restart with new buffers
+ * through omap_start_dma(). Any buffers in flight are discarded.
+ */
+static void omap_clear_dma(int lch)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	p->clear_dma(lch);
+	local_irq_restore(flags);
+}
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+void omap_start_dma(int lch)
+{
+	u32 l;
+
+	/*
+	 * The CPC/CDAC register needs to be initialized to zero
+	 * before starting dma transfer.
+	 */
+	if (dma_omap15xx())
+		p->dma_write(0, CPC, lch);
+	else
+		p->dma_write(0, CDAC, lch);
+
+	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
+		int next_lch, cur_lch;
+		char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT];
+
+		/* Set the link register of the first channel */
+		enable_lnk(lch);
+
+		memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
+		dma_chan_link_map[lch] = 1;
+
+		cur_lch = dma_chan[lch].next_lch;
+		do {
+			next_lch = dma_chan[cur_lch].next_lch;
+
+			/* The loop case: we've been here already */
+			if (dma_chan_link_map[cur_lch])
+				break;
+			/* Mark the current channel */
+			dma_chan_link_map[cur_lch] = 1;
+
+			enable_lnk(cur_lch);
+			omap_enable_channel_irq(cur_lch);
+
+			cur_lch = next_lch;
+		} while (next_lch != -1);
+	} else if (IS_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS))
+		p->dma_write(lch, CLNK_CTRL, lch);
+
+	omap_enable_channel_irq(lch);
+
+	l = p->dma_read(CCR, lch);
+
+	if (IS_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING))
+			l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
+	l |= OMAP_DMA_CCR_EN;
+
+	/*
+	 * As dma_write() uses IO accessors which are weakly ordered, there
+	 * is no guarantee that data in coherent DMA memory will be visible
+	 * to the DMA device.  Add a memory barrier here to ensure that any
+	 * such data is visible prior to enabling DMA.
+	 */
+	mb();
+	p->dma_write(l, CCR, lch);
+
+	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
+}
+EXPORT_SYMBOL(omap_start_dma);
+
+void omap_stop_dma(int lch)
+{
+	u32 l;
+
+	/* Disable all interrupts on the channel */
+	omap_disable_channel_irq(lch);
+
+	l = p->dma_read(CCR, lch);
+	if (IS_DMA_ERRATA(DMA_ERRATA_i541) &&
+			(l & OMAP_DMA_CCR_SEL_SRC_DST_SYNC)) {
+		int i = 0;
+		u32 sys_cf;
+
+		/* Configure No-Standby */
+		l = p->dma_read(OCP_SYSCONFIG, lch);
+		sys_cf = l;
+		l &= ~DMA_SYSCONFIG_MIDLEMODE_MASK;
+		l |= DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_NO_IDLE);
+		p->dma_write(l , OCP_SYSCONFIG, 0);
+
+		l = p->dma_read(CCR, lch);
+		l &= ~OMAP_DMA_CCR_EN;
+		p->dma_write(l, CCR, lch);
+
+		/* Wait for sDMA FIFO drain */
+		l = p->dma_read(CCR, lch);
+		while (i < 100 && (l & (OMAP_DMA_CCR_RD_ACTIVE |
+					OMAP_DMA_CCR_WR_ACTIVE))) {
+			udelay(5);
+			i++;
+			l = p->dma_read(CCR, lch);
+		}
+		if (i >= 100)
+			pr_err("DMA drain did not complete on lch %d\n", lch);
+		/* Restore OCP_SYSCONFIG */
+		p->dma_write(sys_cf, OCP_SYSCONFIG, lch);
+	} else {
+		l &= ~OMAP_DMA_CCR_EN;
+		p->dma_write(l, CCR, lch);
+	}
+
+	/*
+	 * Ensure that data transferred by DMA is visible to any access
+	 * after DMA has been disabled.  This is important for coherent
+	 * DMA regions.
+	 */
+	mb();
+
+	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
+		int next_lch, cur_lch = lch;
+		char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT];
+
+		memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
+		do {
+			/* The loop case: we've been here already */
+			if (dma_chan_link_map[cur_lch])
+				break;
+			/* Mark the current channel */
+			dma_chan_link_map[cur_lch] = 1;
+
+			disable_lnk(cur_lch);
+
+			next_lch = dma_chan[cur_lch].next_lch;
+			cur_lch = next_lch;
+		} while (next_lch != -1);
+	}
+
+	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
+}
+EXPORT_SYMBOL(omap_stop_dma);
+
+/*
+ * Allows changing the DMA callback function or data. This may be needed if
+ * the driver shares a single DMA channel for multiple dma triggers.
+ */
+/*
+ * Returns current physical source address for the given DMA channel.
+ * If the channel is running the caller must disable interrupts prior calling
+ * this function and process the returned value before re-enabling interrupt to
+ * prevent races with the interrupt handler. Note that in continuous mode there
+ * is a chance for CSSA_L register overflow between the two reads resulting
+ * in incorrect return value.
+ */
+dma_addr_t omap_get_dma_src_pos(int lch)
+{
+	dma_addr_t offset = 0;
+
+	if (dma_omap15xx())
+		offset = p->dma_read(CPC, lch);
+	else
+		offset = p->dma_read(CSAC, lch);
+
+	if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0)
+		offset = p->dma_read(CSAC, lch);
+
+	if (!dma_omap15xx()) {
+		/*
+		 * CDAC == 0 indicates that the DMA transfer on the channel has
+		 * not been started (no data has been transferred so far).
+		 * Return the programmed source start address in this case.
+		 */
+		if (likely(p->dma_read(CDAC, lch)))
+			offset = p->dma_read(CSAC, lch);
+		else
+			offset = p->dma_read(CSSA, lch);
+	}
+
+	offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
+
+	return offset;
+}
+EXPORT_SYMBOL(omap_get_dma_src_pos);
+
+/*
+ * Returns current physical destination address for the given DMA channel.
+ * If the channel is running the caller must disable interrupts prior calling
+ * this function and process the returned value before re-enabling interrupt to
+ * prevent races with the interrupt handler. Note that in continuous mode there
+ * is a chance for CDSA_L register overflow between the two reads resulting
+ * in incorrect return value.
+ */
+dma_addr_t omap_get_dma_dst_pos(int lch)
+{
+	dma_addr_t offset = 0;
+
+	if (dma_omap15xx())
+		offset = p->dma_read(CPC, lch);
+	else
+		offset = p->dma_read(CDAC, lch);
+
+	/*
+	 * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
+	 * read before the DMA controller finished disabling the channel.
+	 */
+	if (!dma_omap15xx() && offset == 0) {
+		offset = p->dma_read(CDAC, lch);
+		/*
+		 * CDAC == 0 indicates that the DMA transfer on the channel has
+		 * not been started (no data has been transferred so far).
+		 * Return the programmed destination start address in this case.
+		 */
+		if (unlikely(!offset))
+			offset = p->dma_read(CDSA, lch);
+	}
+
+	offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
+
+	return offset;
+}
+EXPORT_SYMBOL(omap_get_dma_dst_pos);
+
+int omap_get_dma_active_status(int lch)
+{
+	return (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN) != 0;
+}
+EXPORT_SYMBOL(omap_get_dma_active_status);
+#endif
+
+int omap_dma_running(void)
+{
+	int lch;
+
+	if (omap_lcd_dma_running())
+		return 1;
+
+	for (lch = 0; lch < dma_chan_count; lch++)
+		if (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN)
+			return 1;
+
+	return 0;
+}
+
+/*----------------------------------------------------------------------------*/
+
+static int omap1_dma_handle_ch(int ch)
+{
+	u32 csr;
+
+	if (enable_1510_mode && ch >= 6) {
+		csr = dma_chan[ch].saved_csr;
+		dma_chan[ch].saved_csr = 0;
+	} else
+		csr = p->dma_read(CSR, ch);
+	if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
+		dma_chan[ch + 6].saved_csr = csr >> 7;
+		csr &= 0x7f;
+	}
+	if ((csr & 0x3f) == 0)
+		return 0;
+	if (unlikely(dma_chan[ch].dev_id == -1)) {
+		pr_warn("Spurious interrupt from DMA channel %d (CSR %04x)\n",
+			ch, csr);
+		return 0;
+	}
+	if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
+		pr_warn("DMA timeout with device %d\n", dma_chan[ch].dev_id);
+	if (unlikely(csr & OMAP_DMA_DROP_IRQ))
+		pr_warn("DMA synchronization event drop occurred with device %d\n",
+			dma_chan[ch].dev_id);
+	if (likely(csr & OMAP_DMA_BLOCK_IRQ))
+		dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
+	if (likely(dma_chan[ch].callback != NULL))
+		dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
+
+	return 1;
+}
+
+static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
+{
+	int ch = ((int) dev_id) - 1;
+	int handled = 0;
+
+	for (;;) {
+		int handled_now = 0;
+
+		handled_now += omap1_dma_handle_ch(ch);
+		if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
+			handled_now += omap1_dma_handle_ch(ch + 6);
+		if (!handled_now)
+			break;
+		handled += handled_now;
+	}
+
+	return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+struct omap_system_dma_plat_info *omap_get_plat_info(void)
+{
+	return p;
+}
+EXPORT_SYMBOL_GPL(omap_get_plat_info);
+
+static int omap_system_dma_probe(struct platform_device *pdev)
+{
+	int ch, ret = 0;
+	int dma_irq;
+	char irq_name[4];
+
+	p = pdev->dev.platform_data;
+	if (!p) {
+		dev_err(&pdev->dev,
+			"%s: System DMA initialized without platform data\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	d			= p->dma_attr;
+	errata			= p->errata;
+
+	if ((d->dev_caps & RESERVE_CHANNEL) && omap_dma_reserve_channels
+			&& (omap_dma_reserve_channels < d->lch_count))
+		d->lch_count	= omap_dma_reserve_channels;
+
+	dma_lch_count		= d->lch_count;
+	dma_chan_count		= dma_lch_count;
+	enable_1510_mode	= d->dev_caps & ENABLE_1510_MODE;
+
+	dma_chan = devm_kcalloc(&pdev->dev, dma_lch_count,
+				sizeof(*dma_chan), GFP_KERNEL);
+	if (!dma_chan)
+		return -ENOMEM;
+
+	for (ch = 0; ch < dma_chan_count; ch++) {
+		omap_clear_dma(ch);
+
+		dma_chan[ch].dev_id = -1;
+		dma_chan[ch].next_lch = -1;
+
+		if (ch >= 6 && enable_1510_mode)
+			continue;
+
+		/*
+		 * request_irq() doesn't like dev_id (ie. ch) being
+		 * zero, so we have to kludge around this.
+		 */
+		sprintf(&irq_name[0], "%d", ch);
+		dma_irq = platform_get_irq_byname(pdev, irq_name);
+
+		if (dma_irq < 0) {
+			ret = dma_irq;
+			goto exit_dma_irq_fail;
+		}
+
+		/* INT_DMA_LCD is handled in lcd_dma.c */
+		if (dma_irq == INT_DMA_LCD)
+			continue;
+
+		ret = request_irq(dma_irq,
+				omap1_dma_irq_handler, 0, "DMA",
+				(void *) (ch + 1));
+		if (ret != 0)
+			goto exit_dma_irq_fail;
+	}
+
+	/* reserve dma channels 0 and 1 in high security devices on 34xx */
+	if (d->dev_caps & HS_CHANNELS_RESERVED) {
+		pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n");
+		dma_chan[0].dev_id = 0;
+		dma_chan[1].dev_id = 1;
+	}
+	p->show_dma_caps();
+	return 0;
+
+exit_dma_irq_fail:
+	return ret;
+}
+
+static void omap_system_dma_remove(struct platform_device *pdev)
+{
+	int dma_irq, irq_rel = 0;
+
+	for ( ; irq_rel < dma_chan_count; irq_rel++) {
+		dma_irq = platform_get_irq(pdev, irq_rel);
+		free_irq(dma_irq, (void *)(irq_rel + 1));
+	}
+}
+
+static struct platform_driver omap_system_dma_driver = {
+	.probe		= omap_system_dma_probe,
+	.remove_new	= omap_system_dma_remove,
+	.driver		= {
+		.name	= "omap_dma_system"
+	},
+};
+
+static int __init omap_system_dma_init(void)
+{
+	return platform_driver_register(&omap_system_dma_driver);
+}
+arch_initcall(omap_system_dma_init);
+
+static void __exit omap_system_dma_exit(void)
+{
+	platform_driver_unregister(&omap_system_dma_driver);
+}
+
+MODULE_DESCRIPTION("OMAP SYSTEM DMA DRIVER");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments Inc");
+
+/*
+ * Reserve the omap SDMA channels using cmdline bootarg
+ * "omap_dma_reserve_ch=". The valid range is 1 to 32
+ */
+static int __init omap_dma_cmdline_reserve_ch(char *str)
+{
+	if (get_option(&str, &omap_dma_reserve_channels) != 1)
+		omap_dma_reserve_channels = 0;
+	return 1;
+}
+
+__setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch);
+
+
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 2c1e2b32b9b3..9761d8404949 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -52,13 +52,14 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <mach/tc.h>
-#include <mach/mux.h>
+#include <linux/soc/ti/omap1-io.h>
+#include "tc.h"
 #include <linux/omap-dma.h>
 #include <clocksource/timer-ti-dm.h>
 
-#include <mach/irqs.h>
-
+#include "hardware.h"
+#include "mux.h"
+#include "irqs.h"
 #include "iomap.h"
 #include "clock.h"
 #include "pm.h"
@@ -68,7 +69,6 @@
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
-static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
 
@@ -165,10 +165,7 @@ static void omap_pm_wakeup_setup(void)
 	 * drivers must still separately call omap_set_gpio_wakeup() to
 	 * wake up to a GPIO interrupt.
 	 */
-	if (cpu_is_omap7xx())
-		level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) |
-			OMAP_IRQ_BIT(INT_7XX_IH2_IRQ);
-	else if (cpu_is_omap15xx())
+	if (cpu_is_omap15xx())
 		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
 			OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
 	else if (cpu_is_omap16xx())
@@ -177,12 +174,7 @@ static void omap_pm_wakeup_setup(void)
 
 	omap_writel(~level1_wake, OMAP_IH1_MIR);
 
-	if (cpu_is_omap7xx()) {
-		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
-		omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) |
-				OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)),
-				OMAP_IH2_1_MIR);
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
 		omap_writel(~level2_wake,  OMAP_IH2_MIR);
 	} else if (cpu_is_omap16xx()) {
@@ -235,17 +227,7 @@ void omap1_pm_suspend(void)
 	 * Save interrupt, MPUI, ARM and UPLD control registers.
 	 */
 
-	if (cpu_is_omap7xx()) {
-		MPUI7XX_SAVE(OMAP_IH1_MIR);
-		MPUI7XX_SAVE(OMAP_IH2_0_MIR);
-		MPUI7XX_SAVE(OMAP_IH2_1_MIR);
-		MPUI7XX_SAVE(MPUI_CTRL);
-		MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI7XX_SAVE(EMIFS_CONFIG);
-		MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
-
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		MPUI1510_SAVE(OMAP_IH1_MIR);
 		MPUI1510_SAVE(OMAP_IH2_MIR);
 		MPUI1510_SAVE(MPUI_CTRL);
@@ -287,9 +269,8 @@ void omap1_pm_suspend(void)
 	/* stop DSP */
 	omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
 
-		/* shut down dsp_ck */
-	if (!cpu_is_omap7xx())
-		omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
+	/* shut down dsp_ck */
+	omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
 
 	/* temporarily enabling api_ck to access DSP registers */
 	omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
@@ -365,13 +346,7 @@ void omap1_pm_suspend(void)
 	ULPD_RESTORE(ULPD_CLOCK_CTRL);
 	ULPD_RESTORE(ULPD_STATUS_REQ);
 
-	if (cpu_is_omap7xx()) {
-		MPUI7XX_RESTORE(EMIFS_CONFIG);
-		MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG);
-		MPUI7XX_RESTORE(OMAP_IH1_MIR);
-		MPUI7XX_RESTORE(OMAP_IH2_0_MIR);
-		MPUI7XX_RESTORE(OMAP_IH2_1_MIR);
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		MPUI1510_RESTORE(MPUI_CTRL);
 		MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
 		MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
@@ -432,14 +407,7 @@ static int omap_pm_debug_show(struct seq_file *m, void *v)
 	ULPD_SAVE(ULPD_DPLL_CTRL);
 	ULPD_SAVE(ULPD_POWER_CTRL);
 
-	if (cpu_is_omap7xx()) {
-		MPUI7XX_SAVE(MPUI_CTRL);
-		MPUI7XX_SAVE(MPUI_DSP_STATUS);
-		MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
-		MPUI7XX_SAVE(EMIFS_CONFIG);
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		MPUI1510_SAVE(MPUI_CTRL);
 		MPUI1510_SAVE(MPUI_DSP_STATUS);
 		MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
@@ -485,21 +453,7 @@ static int omap_pm_debug_show(struct seq_file *m, void *v)
 		   ULPD_SHOW(ULPD_STATUS_REQ),
 		   ULPD_SHOW(ULPD_POWER_CTRL));
 
-	if (cpu_is_omap7xx()) {
-		seq_printf(m,
-			   "MPUI7XX_CTRL_REG	     0x%-8x \n"
-			   "MPUI7XX_DSP_STATUS_REG:      0x%-8x \n"
-			   "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
-			   "MPUI7XX_DSP_API_CONFIG_REG:  0x%-8x \n"
-			   "MPUI7XX_SDRAM_CONFIG_REG:    0x%-8x \n"
-			   "MPUI7XX_EMIFS_CONFIG_REG:    0x%-8x \n",
-			   MPUI7XX_SHOW(MPUI_CTRL),
-			   MPUI7XX_SHOW(MPUI_DSP_STATUS),
-			   MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG),
-			   MPUI7XX_SHOW(MPUI_DSP_API_CONFIG),
-			   MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG),
-			   MPUI7XX_SHOW(EMIFS_CONFIG));
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		seq_printf(m,
 			   "MPUI1510_CTRL_REG             0x%-8x \n"
 			   "MPUI1510_DSP_STATUS_REG:      0x%-8x \n"
@@ -633,10 +587,7 @@ static int __init omap_pm_init(void)
 	 * These routines need to be in SRAM as that's the only
 	 * memory the MPU can see when it wakes up.
 	 */
-	if (cpu_is_omap7xx()) {
-		omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend,
-						   omap7xx_cpu_suspend_sz);
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
 						   omap1510_cpu_suspend_sz);
 	} else if (cpu_is_omap16xx()) {
@@ -651,13 +602,15 @@ static int __init omap_pm_init(void)
 
 	arm_pm_idle = omap1_pm_idle;
 
-	if (cpu_is_omap7xx())
-		irq = INT_7XX_WAKE_UP_REQ;
-	else if (cpu_is_omap16xx())
+	if (cpu_is_omap16xx())
 		irq = INT_1610_WAKE_UP_REQ;
-	if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup",
-			NULL))
-		pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
+	else
+		irq = -1;
+
+	if (irq >= 0) {
+		if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", NULL))
+			pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
+	}
 
 	/* Program new power ramp-up time
 	 * (0 for most boards since we don't lower voltage when in deep sleep)
@@ -668,9 +621,7 @@ static int __init omap_pm_init(void)
 	omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
 
 	/* Configure IDLECT3 */
-	if (cpu_is_omap7xx())
-		omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3);
-	else if (cpu_is_omap16xx())
+	if (cpu_is_omap16xx())
 		omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
 
 	suspend_set_ops(&omap_pm_ops);
diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
index cd926dcb5e7f..d4373a5c4697 100644
--- a/arch/arm/mach-omap1/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -34,6 +34,8 @@
 #ifndef __ARCH_ARM_MACH_OMAP1_PM_H
 #define __ARCH_ARM_MACH_OMAP1_PM_H
 
+#include <linux/soc/ti/omap1-io.h>
+
 /*
  * ----------------------------------------------------------------------------
  * Register and offset definitions to be used in PM assembler code
@@ -98,19 +100,6 @@
 #define OMAP1610_IDLECT3		0xfffece24
 #define OMAP1610_IDLE_LOOP_REQUEST	0x0400
 
-#define OMAP7XX_IDLECT1_SLEEP_VAL	0x16c7
-#define OMAP7XX_IDLECT2_SLEEP_VAL	0x09c7
-#define OMAP7XX_IDLECT3_VAL		0x3f
-#define OMAP7XX_IDLECT3		0xfffece24
-#define OMAP7XX_IDLE_LOOP_REQUEST	0x0C00
-
-#if     !defined(CONFIG_ARCH_OMAP730) && \
-	!defined(CONFIG_ARCH_OMAP850) && \
-	!defined(CONFIG_ARCH_OMAP15XX) && \
-	!defined(CONFIG_ARCH_OMAP16XX)
-#warning "Power management for this processor not implemented yet"
-#endif
-
 #ifndef __ASSEMBLER__
 
 #include <linux/clk.h>
@@ -123,17 +112,13 @@ extern void allow_idle_sleep(void);
 extern void omap1_pm_idle(void);
 extern void omap1_pm_suspend(void);
 
-extern void omap7xx_cpu_suspend(unsigned long, unsigned long);
 extern void omap1510_cpu_suspend(unsigned long, unsigned long);
 extern void omap1610_cpu_suspend(unsigned long, unsigned long);
-extern void omap7xx_idle_loop_suspend(void);
 extern void omap1510_idle_loop_suspend(void);
 extern void omap1610_idle_loop_suspend(void);
 
-extern unsigned int omap7xx_cpu_suspend_sz;
 extern unsigned int omap1510_cpu_suspend_sz;
 extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap7xx_idle_loop_suspend_sz;
 extern unsigned int omap1510_idle_loop_suspend_sz;
 extern unsigned int omap1610_idle_loop_suspend_sz;
 
@@ -156,10 +141,6 @@ extern void omap_serial_wake_trigger(int enable);
 #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
 #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
 
-#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x))
-#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]
-
 #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
 #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
 #define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
@@ -233,27 +214,6 @@ enum mpui1510_save_state {
 #endif
 };
 
-enum mpui7xx_save_state {
-	MPUI7XX_SLEEP_SAVE_START = 0,
-	/*
-	 * MPUI registers 32 bits
-	 */
-	MPUI7XX_SLEEP_SAVE_MPUI_CTRL,
-	MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR,
-	MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR,
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	MPUI7XX_SLEEP_SAVE_SIZE
-#else
-	MPUI7XX_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
 enum mpui1610_save_state {
 	MPUI1610_SLEEP_SAVE_START = 0,
 	/*
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index 667c1637ff91..c04619ac0631 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Runtime PM support code for OMAP1
  *
  * Author: Kevin Hilman, Deep Root Systems, LLC
  *
  * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -43,4 +40,3 @@ static int __init omap1_pm_runtime_init(void)
 	return 0;
 }
 core_initcall(omap1_pm_runtime_init);
-
diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c
index af2c120b0c4e..2eee6a6965ff 100644
--- a/arch/arm/mach-omap1/reset.c
+++ b/arch/arm/mach-omap1/reset.c
@@ -6,8 +6,7 @@
 #include <linux/io.h>
 #include <linux/reboot.h>
 
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "iomap.h"
 #include "common.h"
 
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 9eb591fbfd89..c7f590645774 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -19,8 +19,8 @@
 
 #include <asm/mach-types.h>
 
-#include <mach/mux.h>
-
+#include "serial.h"
+#include "mux.h"
 #include "pm.h"
 #include "soc.h"
 
@@ -106,13 +106,6 @@ void __init omap_serial_init(void)
 {
 	int i;
 
-	if (cpu_is_omap7xx()) {
-		serial_platform_data[0].regshift = 0;
-		serial_platform_data[1].regshift = 0;
-		serial_platform_data[0].irq = INT_7XX_UART_MODEM_1;
-		serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2;
-	}
-
 	if (cpu_is_omap15xx()) {
 		serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
 		serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
@@ -120,14 +113,6 @@ void __init omap_serial_init(void)
 	}
 
 	for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) {
-
-		/* Don't look at UARTs higher than 2 for omap7xx */
-		if (cpu_is_omap7xx() && i > 1) {
-			serial_platform_data[i].membase = NULL;
-			serial_platform_data[i].mapbase = 0;
-			continue;
-		}
-
 		/* Static mapping, never released */
 		serial_platform_data[i].membase =
 			ioremap(serial_platform_data[i].mapbase, SZ_2K);
@@ -141,7 +126,7 @@ void __init omap_serial_init(void)
 			if (IS_ERR(uart1_ck))
 				printk("Could not get uart1_ck\n");
 			else {
-				clk_enable(uart1_ck);
+				clk_prepare_enable(uart1_ck);
 				if (cpu_is_omap15xx())
 					clk_set_rate(uart1_ck, 12000000);
 			}
@@ -151,7 +136,7 @@ void __init omap_serial_init(void)
 			if (IS_ERR(uart2_ck))
 				printk("Could not get uart2_ck\n");
 			else {
-				clk_enable(uart2_ck);
+				clk_prepare_enable(uart2_ck);
 				if (cpu_is_omap15xx())
 					clk_set_rate(uart2_ck, 12000000);
 				else
@@ -163,7 +148,7 @@ void __init omap_serial_init(void)
 			if (IS_ERR(uart3_ck))
 				printk("Could not get uart3_ck\n");
 			else {
-				clk_enable(uart3_ck);
+				clk_prepare_enable(uart3_ck);
 				if (cpu_is_omap15xx())
 					clk_set_rate(uart3_ck, 12000000);
 			}
diff --git a/arch/arm/mach-omap1/include/mach/serial.h b/arch/arm/mach-omap1/serial.h
index 4700e384c3d9..4700e384c3d9 100644
--- a/arch/arm/mach-omap1/include/mach/serial.h
+++ b/arch/arm/mach-omap1/serial.h
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index a908c51839a4..6192f52d531a 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -36,7 +36,7 @@
 
 #include <asm/assembler.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 
 #include "iomap.h"
 #include "pm.h"
@@ -61,86 +61,6 @@
  *
  */
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	.align	3
-ENTRY(omap7xx_cpu_suspend)
-
-	@ save registers on stack
-	stmfd	sp!, {r0 - r12, lr}
-
-	@ Drain write cache
-	mov	r4, #0
-	mcr	p15, 0, r0, c7, c10, 4
-	nop
-
-	@ load base address of Traffic Controller
-	mov	r6, #TCMIF_ASM_BASE & 0xff000000
-	orr	r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
-	orr	r6, r6, #TCMIF_ASM_BASE & 0x0000ff00
-
-	@ prepare to put SDRAM into self-refresh manually
-	ldr	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-	orr	r9, r7, #SELF_REFRESH_MODE & 0xff000000
-	orr	r9, r9, #SELF_REFRESH_MODE & 0x000000ff
-	str	r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-
-	@ prepare to put EMIFS to Sleep
-	ldr	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-	orr	r9, r8, #IDLE_EMIFS_REQUEST & 0xff
-	str	r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-
-	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
-	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
-	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
-	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
-
-	@ turn off clock domains
-	@ do not disable PERCK (0x04)
-	mov	r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff
-	orr	r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00
-	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-
-	@ request ARM idle
-	mov	r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff
-	orr	r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00
-	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
-	@ disable instruction cache
-	mrc	p15, 0, r9, c1, c0, 0
-	bic	r2, r9, #0x1000
-	mcr	p15, 0, r2, c1, c0, 0
-	nop
-
-/*
- * Let's wait for the next wake up event to wake us up. r0 can't be
- * used here because r0 holds ARM_IDLECT1
- */
-	mov	r2, #0
-	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt
-/*
- * omap7xx_cpu_suspend()'s resume point.
- *
- * It will just start executing here, so we'll restore stuff from the
- * stack.
- */
-	@ re-enable Icache
-	mcr	p15, 0, r9, c1, c0, 0
-
-	@ reset the ARM_IDLECT1 and ARM_IDLECT2.
-	strh	r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
-	@ Restore EMIFF controls
-	str	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-	str	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-
-	@ restore regs and return
-	ldmfd	sp!, {r0 - r12, pc}
-
-ENTRY(omap7xx_cpu_suspend_sz)
-	.word	. - omap7xx_cpu_suspend
-#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
-
 #ifdef CONFIG_ARCH_OMAP15XX
 	.align	3
 ENTRY(omap1510_cpu_suspend)
diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h
index 69daf0187b1d..5fb57fdd9c2b 100644
--- a/arch/arm/mach-omap1/soc.h
+++ b/arch/arm/mach-omap1/soc.h
@@ -1,4 +1,6 @@
 /*
- * We can move mach/soc.h here once the drivers are fixed
+ * We can move linux/soc/ti/omap1-soc.h here once the drivers are fixed
  */
-#include <mach/soc.h>
+#include "hardware.h"
+#include "irqs.h"
+#include <asm/irq.h>
diff --git a/arch/arm/mach-omap1/sram-init.c b/arch/arm/mach-omap1/sram-init.c
index 3bd60708c345..26427d6be896 100644
--- a/arch/arm/mach-omap1/sram-init.c
+++ b/arch/arm/mach-omap1/sram-init.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/set_memory.h>
 
 #include <asm/fncpy.h>
 #include <asm/tlb.h>
@@ -22,22 +23,78 @@
 
 #define OMAP1_SRAM_PA		0x20000000
 #define SRAM_BOOTLOADER_SZ	0x80
+#define ROUND_DOWN(value,boundary)	((value) & (~((boundary)-1)))
+
+static void __iomem *omap_sram_base;
+static unsigned long omap_sram_start;
+static unsigned long omap_sram_skip;
+static unsigned long omap_sram_size;
+static void __iomem *omap_sram_ceil;
+
+/*
+ * Memory allocator for SRAM: calculates the new ceiling address
+ * for pushing a function using the fncpy API.
+ *
+ * Note that fncpy requires the returned address to be aligned
+ * to an 8-byte boundary.
+ */
+static void *omap_sram_push_address(unsigned long size)
+{
+	unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
+
+	available = omap_sram_ceil - (omap_sram_base + omap_sram_skip);
+
+	if (size > available) {
+		pr_err("Not enough space in SRAM\n");
+		return NULL;
+	}
+
+	new_ceil -= size;
+	new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN);
+	omap_sram_ceil = IOMEM(new_ceil);
+
+	return (void __force *)omap_sram_ceil;
+}
+
+void *omap_sram_push(void *funcp, unsigned long size)
+{
+	void *sram;
+	unsigned long base;
+	int pages;
+	void *dst = NULL;
+
+	sram = omap_sram_push_address(size);
+	if (!sram)
+		return NULL;
+
+	base = (unsigned long)sram & PAGE_MASK;
+	pages = PAGE_ALIGN(size) / PAGE_SIZE;
+
+	set_memory_rw(base, pages);
+
+	dst = fncpy(sram, funcp, size);
+
+	set_memory_rox(base, pages);
+
+	return dst;
+}
 
 /*
  * The amount of SRAM depends on the core type.
  * Note that we cannot try to test for SRAM here because writes
  * to secure SRAM will hang the system. Also the SRAM is not
  * yet mapped at this point.
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
  */
 static void __init omap_detect_and_map_sram(void)
 {
-	unsigned long omap_sram_skip = SRAM_BOOTLOADER_SZ;
-	unsigned long omap_sram_start = OMAP1_SRAM_PA;
-	unsigned long omap_sram_size;
+	unsigned long base;
+	int pages;
 
-	if (cpu_is_omap7xx())
-		omap_sram_size = 0x32000;	/* 200K */
-	else if (cpu_is_omap15xx())
+	omap_sram_skip = SRAM_BOOTLOADER_SZ;
+	omap_sram_start = OMAP1_SRAM_PA;
+
+	if (cpu_is_omap15xx())
 		omap_sram_size = 0x30000;	/* 192K */
 	else if (cpu_is_omap1610() || cpu_is_omap1611() ||
 			cpu_is_omap1621() || cpu_is_omap1710())
@@ -47,8 +104,26 @@ static void __init omap_detect_and_map_sram(void)
 		omap_sram_size = 0x4000;
 	}
 
-	omap_map_sram(omap_sram_start, omap_sram_size,
-		omap_sram_skip, 1);
+	omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
+	omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, 1);
+	if (!omap_sram_base) {
+		pr_err("SRAM: Could not map\n");
+		return;
+	}
+
+	omap_sram_ceil = omap_sram_base + omap_sram_size;
+
+	/*
+	 * Looks like we need to preserve some bootloader code at the
+	 * beginning of SRAM for jumping to flash for reboot to work...
+	 */
+	memset_io(omap_sram_base + omap_sram_skip, 0,
+		  omap_sram_size - omap_sram_skip);
+
+	base = (unsigned long)omap_sram_base;
+	pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE;
+
+	set_memory_rox(base, pages);
 }
 
 static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
@@ -56,13 +131,10 @@ static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
 void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
 {
 	BUG_ON(!_omap_sram_reprogram_clock);
-	/* On 730, bit 13 must always be 1 */
-	if (cpu_is_omap7xx())
-		ckctl |= 0x2000;
 	_omap_sram_reprogram_clock(dpllctl, ckctl);
 }
 
-int __init omap_sram_init(void)
+int __init omap1_sram_init(void)
 {
 	omap_detect_and_map_sram();
 	_omap_sram_reprogram_clock =
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 37f34fcd65fb..89f4dc1b70f0 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -6,11 +6,11 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/assembler.h>
 
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "iomap.h"
 
 	.text
diff --git a/arch/arm/mach-omap1/sram.h b/arch/arm/mach-omap1/sram.h
index 73efabd119e8..f45e6dd6d7e5 100644
--- a/arch/arm/mach-omap1/sram.h
+++ b/arch/arm/mach-omap1/sram.h
@@ -1,8 +1,10 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-#include <plat/sram.h>
 
 extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
 
+int omap1_sram_init(void);
+void *omap_sram_push(void *funcp, unsigned long size);
+
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
 extern unsigned long omap1_sram_reprogram_clock_sz;
diff --git a/arch/arm/mach-omap1/include/mach/tc.h b/arch/arm/mach-omap1/tc.h
index adaab6a0bd08..243454bc0684 100644
--- a/arch/arm/mach-omap1/include/mach/tc.h
+++ b/arch/arm/mach-omap1/tc.h
@@ -1,7 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * arch/arm/plat-omap/include/mach/tc.h
- *
  * OMAP Traffic Controller
  *
  * Copyright (C) 2004 Nokia Corporation
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index de590a85a42b..d5e127851dc7 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -47,12 +47,14 @@
 
 #include <asm/irq.h>
 
-#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
+#include "hardware.h"
+#include "mux.h"
 #include "iomap.h"
 #include "common.h"
+#include "clock.h"
 
 #ifdef CONFIG_OMAP_MPU_TIMER
 
@@ -224,6 +226,9 @@ static inline void omap_mpu_timer_init(void)
  */
 void __init omap1_timer_init(void)
 {
+	omap1_clk_init();
+	omap1_mux_init();
+
 	if (omap_32k_timer_init() != 0)
 		omap_mpu_timer_init();
 }
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index 97fc2096b970..81a912c1145a 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -1,4 +1,5 @@
-/**
+// SPDX-License-Identifier: GPL-2.0-only
+/*
  * OMAP1 Dual-Mode Timers - platform device registration
  *
  * Contains first level initialization routines which internally
@@ -9,15 +10,6 @@
  * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  * Tarun Kanti DebBarma <tarun.kanti@ti.com>
  * Thara Gopinath <thara@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/clk.h>
@@ -26,6 +18,7 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/dmtimer-omap.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <clocksource/timer-ti-dm.h>
 
@@ -165,7 +158,7 @@ err_free_pdata:
 	kfree(pdata);
 
 err_free_pdev:
-	platform_device_unregister(pdev);
+	platform_device_put(pdev);
 
 	return ret;
 }
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 780fdf03c3ce..410d17d1d443 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -45,15 +45,13 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
+#include <linux/sched_clock.h>
 
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-#include <plat/counter-32k.h>
-
-#include <mach/hardware.h>
-
+#include "hardware.h"
 #include "common.h"
 
 /*
@@ -159,6 +157,98 @@ static __init void omap_init_32k_timer(void)
 					OMAP_32K_TICKS_PER_SEC, 1, 0xfffffffe);
 }
 
+/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
+#define OMAP2_32KSYNCNT_REV_OFF		0x0
+#define OMAP2_32KSYNCNT_REV_SCHEME	(0x3 << 30)
+#define OMAP2_32KSYNCNT_CR_OFF_LOW	0x10
+#define OMAP2_32KSYNCNT_CR_OFF_HIGH	0x30
+
+/*
+ * 32KHz clocksource ... always available, on pretty most chips except
+ * OMAP 730 and 1510.  Other timers could be used as clocksources, with
+ * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
+ * but systems won't necessarily want to spend resources that way.
+ */
+static void __iomem *sync32k_cnt_reg;
+
+static u64 notrace omap_32k_read_sched_clock(void)
+{
+	return sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0;
+}
+
+/**
+ * omap_read_persistent_clock64 -  Return time from a persistent clock.
+ *
+ * Reads the time from a source which isn't disabled during PM, the
+ * 32k sync timer.  Convert the cycles elapsed since last read into
+ * nsecs and adds to a monotonically increasing timespec64.
+ */
+static struct timespec64 persistent_ts;
+static cycles_t cycles;
+static unsigned int persistent_mult, persistent_shift;
+
+static void omap_read_persistent_clock64(struct timespec64 *ts)
+{
+	unsigned long long nsecs;
+	cycles_t last_cycles;
+
+	last_cycles = cycles;
+	cycles = sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0;
+
+	nsecs = clocksource_cyc2ns(cycles - last_cycles,
+					persistent_mult, persistent_shift);
+
+	timespec64_add_ns(&persistent_ts, nsecs);
+
+	*ts = persistent_ts;
+}
+
+/**
+ * omap_init_clocksource_32k - setup and register counter 32k as a
+ * kernel clocksource
+ * @pbase: base addr of counter_32k module
+ * @size: size of counter_32k to map
+ *
+ * Returns 0 upon success or negative error code upon failure.
+ *
+ */
+static int __init omap_init_clocksource_32k(void __iomem *vbase)
+{
+	int ret;
+
+	/*
+	 * 32k sync Counter IP register offsets vary between the
+	 * highlander version and the legacy ones.
+	 * The 'SCHEME' bits(30-31) of the revision register is used
+	 * to identify the version.
+	 */
+	if (readl_relaxed(vbase + OMAP2_32KSYNCNT_REV_OFF) &
+						OMAP2_32KSYNCNT_REV_SCHEME)
+		sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH;
+	else
+		sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW;
+
+	/*
+	 * 120000 rough estimate from the calculations in
+	 * __clocksource_update_freq_scale.
+	 */
+	clocks_calc_mult_shift(&persistent_mult, &persistent_shift,
+			32768, NSEC_PER_SEC, 120000);
+
+	ret = clocksource_mmio_init(sync32k_cnt_reg, "32k_counter", 32768,
+				250, 32, clocksource_mmio_readl_up);
+	if (ret) {
+		pr_err("32k_counter: can't register clocksource\n");
+		return ret;
+	}
+
+	sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
+	register_persistent_clock(omap_read_persistent_clock64);
+	pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
+
+	return 0;
+}
+
 /*
  * ---------------------------------------------------------------------------
  * Timer initialization
@@ -180,7 +270,7 @@ int __init omap_32k_timer_init(void)
 
 		sync32k_ick = clk_get(NULL, "omap_32ksync_ick");
 		if (!IS_ERR(sync32k_ick))
-			clk_enable(sync32k_ick);
+			clk_prepare_enable(sync32k_ick);
 
 		ret = omap_init_clocksource_32k(base);
 	}
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 86d3b3c157af..08d42abc4a0f 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -11,13 +11,14 @@
 #include <linux/platform_device.h>
 #include <linux/dma-map-ops.h>
 #include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/soc/ti/omap1-io.h>
 
 #include <asm/irq.h>
 
-#include <mach/mux.h>
-
-#include <mach/usb.h>
-
+#include "hardware.h"
+#include "mux.h"
+#include "usb.h"
 #include "common.h"
 
 /* These routines should handle the standard chip-specific modes
@@ -189,12 +190,6 @@ static struct platform_device udc_device = {
 
 static inline void udc_device_init(struct omap_usb_config *pdata)
 {
-	/* IRQ numbers for omap7xx */
-	if(cpu_is_omap7xx()) {
-		udc_resources[1].start = INT_7XX_USB_GENI;
-		udc_resources[2].start = INT_7XX_USB_NON_ISO;
-		udc_resources[3].start = INT_7XX_USB_ISO;
-	}
 	pdata->udc_device = &udc_device;
 }
 
@@ -206,8 +201,6 @@ static inline void udc_device_init(struct omap_usb_config *pdata)
 
 #endif
 
-#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
-
 /* The dmamask must be set for OHCI to work */
 static u64 ohci_dmamask = ~(u32)0;
 
@@ -236,20 +229,13 @@ static struct platform_device ohci_device = {
 
 static inline void ohci_device_init(struct omap_usb_config *pdata)
 {
-	if (cpu_is_omap7xx())
-		ohci_resources[1].start = INT_7XX_USB_HHC_1;
+	if (!IS_ENABLED(CONFIG_USB_OHCI_HCD))
+		return;
+
 	pdata->ohci_device = &ohci_device;
 	pdata->ocpi_enable = &ocpi_enable;
 }
 
-#else
-
-static inline void ohci_device_init(struct omap_usb_config *pdata)
-{
-}
-
-#endif
-
 #if	defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
 
 static struct resource otg_resources[] = {
@@ -273,8 +259,6 @@ static struct platform_device otg_device = {
 
 static inline void otg_device_init(struct omap_usb_config *pdata)
 {
-	if (cpu_is_omap7xx())
-		otg_resources[1].start = INT_7XX_USB_OTG;
 	pdata->otg_device = &otg_device;
 }
 
@@ -303,14 +287,7 @@ static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
 	}
 
 	if (is_device) {
-		if (cpu_is_omap7xx()) {
-			omap_cfg_reg(AA17_7XX_USB_DM);
-			omap_cfg_reg(W16_7XX_USB_PU_EN);
-			omap_cfg_reg(W17_7XX_USB_VBUSI);
-			omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
-			omap_cfg_reg(W19_7XX_USB_DCRST);
-		} else
-			omap_cfg_reg(W4_USB_PUEN);
+		omap_cfg_reg(W4_USB_PUEN);
 	}
 
 	if (nwires == 2) {
@@ -330,14 +307,11 @@ static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
 		 *  - OTG support on this port not yet written
 		 */
 
-		/* Don't do this for omap7xx -- it causes USB to not work correctly */
-		if (!cpu_is_omap7xx()) {
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l &= ~(7 << 4);
-			if (!is_device)
-				l |= (3 << 1);
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~(7 << 4);
+		if (!is_device)
+			l |= (3 << 1);
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
 
 		return 3 << 16;
 	}
@@ -534,33 +508,87 @@ bad:
 }
 
 #ifdef	CONFIG_ARCH_OMAP15XX
+/* OMAP-1510 OHCI has its own MMU for DMA */
+#define OMAP1510_LB_MEMSIZE	32	/* Should be same as SDRAM size */
+#define OMAP1510_LB_CLOCK_DIV	0xfffec10c
+#define OMAP1510_LB_MMU_CTL	0xfffec208
+#define OMAP1510_LB_MMU_LCK	0xfffec224
+#define OMAP1510_LB_MMU_LD_TLB	0xfffec228
+#define OMAP1510_LB_MMU_CAM_H	0xfffec22c
+#define OMAP1510_LB_MMU_CAM_L	0xfffec230
+#define OMAP1510_LB_MMU_RAM_H	0xfffec234
+#define OMAP1510_LB_MMU_RAM_L	0xfffec238
 
-/* ULPD_DPLL_CTRL */
-#define DPLL_IOB		(1 << 13)
-#define DPLL_PLL_ENABLE		(1 << 4)
-#define DPLL_LOCK		(1 << 0)
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus.
+ */
+#define OMAP1510_LB_OFFSET	   UL(0x30000000)
 
-/* ULPD_APLL_CTRL */
-#define APLL_NDPLL_SWITCH	(1 << 0)
+/*
+ * OMAP-1510 specific Local Bus clock on/off
+ */
+static int omap_1510_local_bus_power(int on)
+{
+	if (on) {
+		omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL);
+		udelay(200);
+	} else {
+		omap_writel(0, OMAP1510_LB_MMU_CTL);
+	}
 
-static int omap_1510_usb_ohci_notifier(struct notifier_block *nb,
-		unsigned long event, void *data)
+	return 0;
+}
+
+/*
+ * OMAP-1510 specific Local Bus initialization
+ * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
+ *       See also arch/mach-omap/memory.h for __virt_to_dma() and
+ *       __dma_to_virt() which need to match with the physical
+ *       Local Bus address below.
+ */
+static int omap_1510_local_bus_init(void)
 {
-	struct device *dev = data;
+	unsigned int tlb;
+	unsigned long lbaddr, physaddr;
+
+	omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
+	       OMAP1510_LB_CLOCK_DIV);
+
+	/* Configure the Local Bus MMU table */
+	for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) {
+		lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
+		physaddr = tlb * 0x00100000 + PHYS_OFFSET;
+		omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
+		omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
+		       OMAP1510_LB_MMU_CAM_L);
+		omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
+		omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);
+		omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK);
+		omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB);
+	}
 
-	if (event != BUS_NOTIFY_ADD_DEVICE)
-		return NOTIFY_DONE;
+	/* Enable the walking table */
+	omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL);
+	udelay(200);
 
-	if (strncmp(dev_name(dev), "ohci", 4) == 0 &&
-	    dma_direct_set_offset(dev, PHYS_OFFSET, OMAP1510_LB_OFFSET,
-			(u64)-1))
-		WARN_ONCE(1, "failed to set DMA offset\n");
-	return NOTIFY_OK;
+	return 0;
 }
 
-static struct notifier_block omap_1510_usb_ohci_nb = {
-	.notifier_call		= omap_1510_usb_ohci_notifier,
-};
+static void omap_1510_local_bus_reset(void)
+{
+	omap_1510_local_bus_power(1);
+	omap_1510_local_bus_init();
+}
+
+/* ULPD_DPLL_CTRL */
+#define DPLL_IOB		(1 << 13)
+#define DPLL_PLL_ENABLE		(1 << 4)
+#define DPLL_LOCK		(1 << 0)
+
+/* ULPD_APLL_CTRL */
+#define APLL_NDPLL_SWITCH	(1 << 0)
 
 static void __init omap_1510_usb_init(struct omap_usb_config *config)
 {
@@ -616,19 +644,19 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 	}
 #endif
 
-#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
-	if (config->register_host) {
+	if (IS_ENABLED(CONFIG_USB_OHCI_HCD) && config->register_host) {
 		int status;
 
-		bus_register_notifier(&platform_bus_type,
-				      &omap_1510_usb_ohci_nb);
 		ohci_device.dev.platform_data = config;
+		dma_direct_set_offset(&ohci_device.dev, PHYS_OFFSET,
+				      OMAP1510_LB_OFFSET, (u64)-1);
 		status = platform_device_register(&ohci_device);
 		if (status)
 			pr_debug("can't register OHCI device, %d\n", status);
 		/* hcd explicitly gates 48MHz */
+
+		config->lb_reset = omap_1510_local_bus_reset;
 	}
-#endif
 }
 
 #else
@@ -650,7 +678,7 @@ void __init omap1_usb_init(struct omap_usb_config *_pdata)
 	ohci_device_init(pdata);
 	otg_device_init(pdata);
 
-	if (cpu_is_omap7xx() || cpu_is_omap16xx())
+	if (cpu_is_omap16xx())
 		omap_otg_init(pdata);
 	else if (cpu_is_omap15xx())
 		omap_1510_usb_init(pdata);
diff --git a/arch/arm/mach-omap1/usb.h b/arch/arm/mach-omap1/usb.h
new file mode 100644
index 000000000000..08c9344c46e3
--- /dev/null
+++ b/arch/arm/mach-omap1/usb.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * fixme correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#include <linux/platform_data/usb-omap1.h>
+#include <linux/soc/ti/omap1-usb.h>
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+#define	is_usb0_device(config)	1
+#else
+#define	is_usb0_device(config)	0
+#endif
+
+#if IS_ENABLED(CONFIG_USB_SUPPORT)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#define OMAP1_OHCI_BASE			0xfffba000
+#define OMAP2_OHCI_BASE			0x4805e000
+#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 4178c0ee46eb..821727eefd5a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -34,7 +34,6 @@ config ARCH_OMAP4
 	select ARM_GIC
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select OMAP_HWMOD
 	select OMAP_INTERCONNECT
 	select OMAP_INTERCONNECT_BARRIER
 	select PL310_ERRATA_588369 if CACHE_L2X0
@@ -54,7 +53,6 @@ config SOC_OMAP5
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_ARCH_TIMER
 	select ARM_ERRATA_798181 if SMP
-	select OMAP_HWMOD
 	select OMAP_INTERCONNECT
 	select OMAP_INTERCONNECT_BARRIER
 	select PM_OPP
@@ -90,7 +88,6 @@ config SOC_DRA7XX
 	select HAVE_ARM_ARCH_TIMER
 	select IRQ_CROSSBAR
 	select ARM_ERRATA_798181 if SMP
-	select OMAP_HWMOD
 	select OMAP_INTERCONNECT
 	select OMAP_INTERCONNECT_BARRIER
 	select PM_OPP
@@ -108,6 +105,7 @@ config ARCH_OMAP2PLUS
 	select MACH_OMAP_GENERIC
 	select MEMORY
 	select MFD_SYSCON
+	select OMAP_DM_SYSTIMER
 	select OMAP_DM_TIMER
 	select OMAP_GPMC
 	select PINCTRL
@@ -115,7 +113,6 @@ config ARCH_OMAP2PLUS
 	select PM_GENERIC_DOMAINS
 	select PM_GENERIC_DOMAINS_OF
 	select RESET_CONTROLLER
-	select SIMPLE_PM_BUS
 	select SOC_BUS
 	select TI_SYSC
 	select OMAP_IRQCHIP
@@ -126,7 +123,9 @@ config ARCH_OMAP2PLUS
 config OMAP_INTERCONNECT_BARRIER
 	bool
 	select ARM_HEAVY_MB
-	
+
+config ARCH_OMAP
+	bool
 
 if ARCH_OMAP2PLUS
 
@@ -157,6 +156,53 @@ config SOC_HAS_REALTIME_COUNTER
 	depends on SOC_OMAP5 || SOC_DRA7XX
 	default y
 
+config POWER_AVS_OMAP
+	bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
+	depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
+	select POWER_SUPPLY
+	help
+	  Say Y to enable AVS(Adaptive Voltage Scaling)
+	  support on OMAP containing the version 1 or
+	  version 2 of the SmartReflex IP.
+	  V1 is the 65nm version used in OMAP3430.
+	  V2 is the update for the 45nm version of the IP used in OMAP3630
+	  and OMAP4430
+
+	  Please note, that by default SmartReflex is only
+	  initialized and not enabled. To enable the automatic voltage
+	  compensation for vdd mpu and vdd core from user space,
+	  user must write 1 to
+		/debug/smartreflex/sr_<X>/autocomp,
+	  where X is mpu_iva or core for OMAP3.
+	  Optionally autocompensation can be enabled in the kernel
+	  by default during system init via the enable_on_init flag
+	  which an be passed as platform data to the smartreflex driver.
+
+config POWER_AVS_OMAP_CLASS3
+	bool "Class 3 mode of Smartreflex Implementation"
+	depends on POWER_AVS_OMAP && TWL4030_CORE
+	help
+	  Say Y to enable Class 3 implementation of Smartreflex
+
+	  Class 3 implementation of Smartreflex employs continuous hardware
+	  voltage calibration.
+
+config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+	bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
+	depends on ARCH_OMAP3 && PM
+	help
+	  Without this option, L2 Auxiliary control register contents are
+	  lost during off-mode entry on HS/EMU devices. This feature
+	  requires support from PPA / boot-loader in HS/EMU devices, which
+	  currently does not exist by default.
+
+config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
+	int "Service ID for the support routine to set L2 AUX control"
+	depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+	default 43
+	help
+	  PPA routine service ID for setting L2 auxiliary control register.
+
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
 
@@ -164,6 +210,7 @@ config SOC_OMAP2420
 	bool "OMAP2420 support"
 	depends on ARCH_OMAP2
 	default y
+	select OMAP_DM_SYSTIMER
 	select OMAP_DM_TIMER
 	select SOC_HAS_OMAP2_SDRC
 
@@ -184,18 +231,6 @@ config SOC_TI81XX
 	depends on ARCH_OMAP3
 	default y
 
-config OMAP_PACKAGE_CBC
-       bool
-
-config OMAP_PACKAGE_CBB
-       bool
-
-config OMAP_PACKAGE_CUS
-       bool
-
-config OMAP_PACKAGE_CBP
-       bool
-
 comment "OMAP Legacy Platform Data Board Type"
 	depends on ARCH_OMAP2PLUS
 
@@ -207,22 +242,11 @@ config MACH_OMAP2_TUSB6010
 	depends on ARCH_OMAP2 && SOC_OMAP2420
 	default y if MACH_NOKIA_N8X0
 
-config MACH_OMAP3517EVM
-	bool "OMAP3517/ AM3517 EVM board"
-	depends on ARCH_OMAP3
-	default y
-
-config MACH_OMAP3_PANDORA
-	bool "OMAP3 Pandora"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_NOKIA_N810
-       bool
+	bool
 
 config MACH_NOKIA_N810_WIMAX
-       bool
+	bool
 
 config MACH_NOKIA_N8X0
 	bool "Nokia N800/N810"
@@ -231,17 +255,6 @@ config MACH_NOKIA_N8X0
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
 
-config OMAP3_SDRC_AC_TIMING
-	bool "Enable SDRC AC timing register changes"
-	depends on ARCH_OMAP3
-	help
-	  If you know that none of your system initiators will attempt to
-	  access SDRAM during CORE DVFS, select Y here.  This should boost
-	  SDRAM performance at lower CORE OPPs.  There are relatively few
-	  users who will wish to say yes at this point - almost everyone will
-	  wish to say no.  Selecting yes without understanding what is
-	  going on could result in system crashes;
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 9bcfb34a2206..daf21127c82f 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,14 +3,11 @@
 # Makefile for the linux kernel.
 #
 
-ccflags-y := -I$(srctree)/$(src)/include \
-	-I$(srctree)/arch/arm/plat-omap/include
-
 # Common support
 obj-y := id.o io.o control.o devices.o fb.o pm.o \
 	 common.o dma.o omap-headsmp.o sram.o
 
-hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \
+hwmod-common				= omap_hwmod.o \
 					  omap_hwmod_common_data.o \
 					  omap_hwmod_common_ipblock_data.o \
 					  omap_device.o display.o hdq1w.o \
@@ -20,14 +17,14 @@ secure-common				= omap-smc.o omap-secure.o
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
-obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(secure-common)
 obj-$(CONFIG_SOC_AM33XX) += $(secure-common)
-obj-$(CONFIG_SOC_OMAP5)  += $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_OMAP5)  += $(secure-common)
 obj-$(CONFIG_SOC_AM43XX) += $(secure-common)
-obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_DRA7XX) += $(secure-common)
 
 ifneq ($(CONFIG_SND_SOC_OMAP_MCBSP),)
-obj-y += mcbsp.o
+obj-$(CONFIG_OMAP_HWMOD) += mcbsp.o
 endif
 
 obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
@@ -83,7 +80,6 @@ obj-$(CONFIG_ARCH_OMAP4)		+= $(omap-4-5-pm-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(omap-4-5-pm-common)
 
 ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 omap-4-5-pm-common			+= pm44xx.o
@@ -207,9 +203,6 @@ obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_2xxx_3xxx_ipblock_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
 obj-$(CONFIG_SOC_TI81XX)		+= omap_hwmod_81xx_data.o
-obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
-obj-$(CONFIG_SOC_OMAP5)			+= omap_hwmod_54xx_data.o
-obj-$(CONFIG_SOC_DRA7XX)		+= omap_hwmod_7xx_data.o
 
 # OMAP2420 MSDI controller integration support ("MMC")
 obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
diff --git a/arch/arm/mach-omap2/am33xx.h b/arch/arm/mach-omap2/am33xx.h
index bf2b5f87e404..32bcfcf34817 100644
--- a/arch/arm/mach-omap2/am33xx.h
+++ b/arch/arm/mach-omap2/am33xx.h
@@ -1,16 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * This file contains the address info for various AM33XX modules.
  *
  * Copyright (C) 2011 Texas Instruments, Inc. - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __ASM_ARCH_AM33XX_H
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 7290f033fd2d..1610c567a6a3 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -33,7 +33,7 @@ static void __init __maybe_unused omap_generic_init(void)
 }
 
 /* Clocks are needed early, see drivers/clocksource for the rest */
-void __init __maybe_unused omap_init_time_of(void)
+static void __init __maybe_unused omap_init_time_of(void)
 {
 	omap_clk_init();
 	timer_probe();
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 418a61ecb827..3353b0a923d9 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -22,7 +22,6 @@
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/platform_data/mmc-omap.h>
 #include <linux/mfd/menelaus.h>
-#include <sound/tlv320aic3x.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -322,6 +321,7 @@ static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
 
 static void n8x0_mmc_callback(void *data, u8 card_mask)
 {
+#ifdef CONFIG_MMC_OMAP
 	int bit, *openp, index;
 
 	if (board_is_n800()) {
@@ -339,7 +339,6 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	else
 		*openp = 0;
 
-#ifdef CONFIG_MMC_OMAP
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
 #else
 	pr_warn("MMC: notify cover event not available\n");
@@ -505,7 +504,7 @@ static void __init n8x0_mmc_init(void)
 }
 #else
 static struct omap_mmc_platform_data mmc1_data;
-void __init n8x0_mmc_init(void)
+static void __init n8x0_mmc_init(void)
 {
 }
 #endif	/* CONFIG_MMC_OMAP */
@@ -567,10 +566,6 @@ struct menelaus_platform_data n8x0_menelaus_platform_data = {
 	.late_init = n8x0_menelaus_late_init,
 };
 
-struct aic3x_pdata n810_aic33_data = {
-	.gpio_reset = 118,
-};
-
 static int __init n8x0_late_initcall(void)
 {
 	if (!board_caps)
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
index 8a9983cb4733..93f6d3cd9525 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/clk.h>
+#include <linux/clk/ti.h>
 #include <linux/io.h>
 
 #include "clock.h"
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index edf046b470ba..be4557d1fdac 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -39,6 +39,8 @@
 #include "sdrc.h"
 #include "sram.h"
 
+static u16 cpu_mask;
+
 const struct prcm_config *curr_prcm_set;
 const struct prcm_config *rate_table;
 
@@ -55,7 +57,7 @@ static unsigned long sys_ck_rate;
  *
  * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
  */
-unsigned long omap2_table_mpu_recalc(struct clk_hw *clk,
+static unsigned long omap2_table_mpu_recalc(struct clk_hw *clk,
 				     unsigned long parent_rate)
 {
 	return curr_prcm_set->mpu_speed;
@@ -68,7 +70,7 @@ unsigned long omap2_table_mpu_recalc(struct clk_hw *clk,
  * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
  * just uses the ARM rates.
  */
-long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
+static long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
 			       unsigned long *parent_rate)
 {
 	const struct prcm_config *ptr;
@@ -92,8 +94,8 @@ long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
 }
 
 /* Sets basic clocks based on the specified rate */
-int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
-			    unsigned long parent_rate)
+static int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
 {
 	u32 cur_rate, done_rate, bypass = 0;
 	const struct prcm_config *prcm;
@@ -167,7 +169,7 @@ int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
  * global to point to the active rate set when found; otherwise, sets
  * it to NULL.  No return value;
  */
-void omap2xxx_clkt_vps_check_bootloader_rates(void)
+static void omap2xxx_clkt_vps_check_bootloader_rates(void)
 {
 	const struct prcm_config *prcm = NULL;
 	unsigned long rate;
@@ -193,7 +195,7 @@ void omap2xxx_clkt_vps_check_bootloader_rates(void)
  * sys_ck rate, but before the virt_prcm_set clock rate is
  * recalculated.  No return value.
  */
-void omap2xxx_clkt_vps_late_init(void)
+static void omap2xxx_clkt_vps_late_init(void)
 {
 	struct clk *c;
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 3c1d12dc8ff3..83fae51722a9 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -36,8 +36,6 @@
 #include "cm-regbits-34xx.h"
 #include "common.h"
 
-u16 cpu_mask;
-
 /* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
 #define OMAP3430_DPLL_FINT_BAND1_MIN	750000
 #define OMAP3430_DPLL_FINT_BAND1_MAX	2100000
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index bbe4b32891bb..41391fa1418a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -63,13 +63,6 @@
 
 extern struct ti_clk_ll_ops omap_clk_ll_ops;
 
-extern u16 cpu_mask;
-
-extern const struct clkops clkops_omap2_dflt_wait;
-extern const struct clkops clkops_omap2_dflt;
-
-extern struct clk_functions omap2_clk_functions;
-
 int __init omap2_clk_setup_ll_ops(void);
 
 void __init ti_clk_init_features(void);
diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h
index a8408f9d0f33..73c011dadfd2 100644
--- a/arch/arm/mach-omap2/clock2xxx.h
+++ b/arch/arm/mach-omap2/clock2xxx.h
@@ -12,35 +12,6 @@
 #include <linux/clk-provider.h>
 #include "clock.h"
 
-unsigned long omap2_table_mpu_recalc(struct clk_hw *clk,
-				     unsigned long parent_rate);
-int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
-			    unsigned long parent_rate);
-long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
-			       unsigned long *parent_rate);
-unsigned long omap2xxx_sys_clk_recalc(struct clk_hw *clk,
-				      unsigned long parent_rate);
-unsigned long omap2_osc_clk_recalc(struct clk_hw *clk,
-				   unsigned long parent_rate);
-void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
 unsigned long omap2xxx_clk_get_core_rate(void);
-u32 omap2xxx_get_sysclkdiv(void);
-void omap2xxx_clk_prepare_for_reboot(void);
-void omap2xxx_clkt_vps_check_bootloader_rates(void);
-void omap2xxx_clkt_vps_late_init(void);
-
-#ifdef CONFIG_SOC_OMAP2420
-int omap2420_clk_init(void);
-#else
-#define omap2420_clk_init()	do { } while(0)
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
-int omap2430_clk_init(void);
-#else
-#define omap2430_clk_init()	do { } while(0)
-#endif
-
-extern struct clk_hw *dclk_hw;
 
 #endif
diff --git a/arch/arm/mach-omap2/clock3xxx.h b/arch/arm/mach-omap2/clock3xxx.h
deleted file mode 100644
index 10a9f577dc1a..000000000000
--- a/arch/arm/mach-omap2/clock3xxx.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * OMAP3-common clock function prototypes and macros
- *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
-
-int omap3xxx_clk_init(void);
-int omap3_core_dpll_m2_set_rate(struct clk_hw *clk, unsigned long rate,
-					unsigned long parent_rate);
-
-extern struct clk *sdrc_ick_p;
-extern struct clk *arm_fck_p;
-
-extern const struct clkops clkops_noncore_dpll_ops;
-
-#endif
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 1feb0098705e..d145e7ac709b 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -831,7 +831,7 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
  * -EINVAL if @clkdm is NULL or if clockdomain does not support
  * software-initiated sleep; 0 upon success.
  */
-int clkdm_sleep_nolock(struct clockdomain *clkdm)
+static int clkdm_sleep_nolock(struct clockdomain *clkdm)
 {
 	int ret;
 
@@ -885,7 +885,7 @@ int clkdm_sleep(struct clockdomain *clkdm)
  * -EINVAL if @clkdm is NULL or if the clockdomain does not support
  * software-controlled wakeup; 0 upon success.
  */
-int clkdm_wakeup_nolock(struct clockdomain *clkdm)
+static int clkdm_wakeup_nolock(struct clockdomain *clkdm)
 {
 	int ret;
 
@@ -1043,46 +1043,6 @@ void clkdm_deny_idle(struct clockdomain *clkdm)
 	pwrdm_unlock(clkdm->pwrdm.ptr);
 }
 
-/**
- * clkdm_in_hwsup - is clockdomain @clkdm have hardware-supervised idle enabled?
- * @clkdm: struct clockdomain *
- *
- * Returns true if clockdomain @clkdm currently has
- * hardware-supervised idle enabled, or false if it does not or if
- * @clkdm is NULL.  It is only valid to call this function after
- * clkdm_init() has been called.  This function does not actually read
- * bits from the hardware; it instead tests an in-memory flag that is
- * changed whenever the clockdomain code changes the auto-idle mode.
- */
-bool clkdm_in_hwsup(struct clockdomain *clkdm)
-{
-	bool ret;
-
-	if (!clkdm)
-		return false;
-
-	ret = (clkdm->_flags & _CLKDM_FLAG_HWSUP_ENABLED) ? true : false;
-
-	return ret;
-}
-
-/**
- * clkdm_missing_idle_reporting - can @clkdm enter autoidle even if in use?
- * @clkdm: struct clockdomain *
- *
- * Returns true if clockdomain @clkdm has the
- * CLKDM_MISSING_IDLE_REPORTING flag set, or false if not or @clkdm is
- * null.  More information is available in the documentation for the
- * CLKDM_MISSING_IDLE_REPORTING macro.
- */
-bool clkdm_missing_idle_reporting(struct clockdomain *clkdm)
-{
-	if (!clkdm)
-		return false;
-
-	return (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) ? true : false;
-}
-
 /* Public autodep handling functions (deprecated) */
 
 /**
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 68550b23c938..c36fb2721261 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -203,12 +203,8 @@ void clkdm_allow_idle_nolock(struct clockdomain *clkdm);
 void clkdm_allow_idle(struct clockdomain *clkdm);
 void clkdm_deny_idle_nolock(struct clockdomain *clkdm);
 void clkdm_deny_idle(struct clockdomain *clkdm);
-bool clkdm_in_hwsup(struct clockdomain *clkdm);
-bool clkdm_missing_idle_reporting(struct clockdomain *clkdm);
 
-int clkdm_wakeup_nolock(struct clockdomain *clkdm);
 int clkdm_wakeup(struct clockdomain *clkdm);
-int clkdm_sleep_nolock(struct clockdomain *clkdm);
 int clkdm_sleep(struct clockdomain *clkdm);
 
 int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk);
diff --git a/arch/arm/mach-omap2/clockdomains33xx_data.c b/arch/arm/mach-omap2/clockdomains33xx_data.c
index b4d5144df445..87f4e927eb18 100644
--- a/arch/arm/mach-omap2/clockdomains33xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains33xx_data.c
@@ -1,17 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * AM33XX Clock Domain data.
  *
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
  * Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-omap2/clockdomains81xx_data.c b/arch/arm/mach-omap2/clockdomains81xx_data.c
index 127dc7ace71f..549cf61487a5 100644
--- a/arch/arm/mach-omap2/clockdomains81xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains81xx_data.c
@@ -1,17 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * TI81XX Clock Domain data.
  *
  * Copyright (C) 2010 Texas Instruments, Inc. - https://www.ti.com/
  * Copyright (C) 2013 SKTB SKiT, http://www.skitlab.ru/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_81XX_H
diff --git a/arch/arm/mach-omap2/cm-regbits-33xx.h b/arch/arm/mach-omap2/cm-regbits-33xx.h
index e7ae2bb515e3..1b97219aaba4 100644
--- a/arch/arm/mach-omap2/cm-regbits-33xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-33xx.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * AM33XX Power Management register bits
  *
@@ -5,15 +6,6 @@
  * Vaibhav Hiremath <hvaibhav@ti.com>
  *
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
  */
 
 
diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h
index 1e9c23c107b2..553a6267ed57 100644
--- a/arch/arm/mach-omap2/cm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-44xx.h
@@ -20,71 +20,11 @@
 #define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
 
 #define OMAP4430_ABE_STATDEP_SHIFT				3
-#define OMAP4430_AUTO_DPLL_MODE_MASK				(0x7 << 0)
-#define OMAP4430_CLKSEL_SHIFT					24
-#define OMAP4430_CLKSEL_WIDTH					0x1
-#define OMAP4430_CLKSEL_MASK					(1 << 24)
-#define OMAP4430_CLKSEL_0_0_SHIFT				0
-#define OMAP4430_CLKSEL_0_0_WIDTH				0x1
-#define OMAP4430_CLKSEL_0_1_SHIFT				0
-#define OMAP4430_CLKSEL_0_1_WIDTH				0x2
-#define OMAP4430_CLKSEL_24_25_SHIFT				24
-#define OMAP4430_CLKSEL_24_25_WIDTH				0x2
-#define OMAP4430_CLKSEL_60M_SHIFT				24
-#define OMAP4430_CLKSEL_60M_WIDTH				0x1
-#define OMAP4430_CLKSEL_AESS_FCLK_SHIFT				24
-#define OMAP4430_CLKSEL_AESS_FCLK_WIDTH				0x1
-#define OMAP4430_CLKSEL_CORE_SHIFT				0
-#define OMAP4430_CLKSEL_CORE_WIDTH				0x1
-#define OMAP4430_CLKSEL_DIV_SHIFT				24
-#define OMAP4430_CLKSEL_DIV_WIDTH				0x1
-#define OMAP4430_CLKSEL_FCLK_SHIFT				24
-#define OMAP4430_CLKSEL_FCLK_WIDTH				0x2
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT			25
-#define OMAP4430_CLKSEL_INTERNAL_SOURCE_WIDTH			0x1
-#define OMAP4430_CLKSEL_L3_SHIFT				4
-#define OMAP4430_CLKSEL_L3_WIDTH				0x1
-#define OMAP4430_CLKSEL_L4_SHIFT				8
-#define OMAP4430_CLKSEL_L4_WIDTH				0x1
-#define OMAP4430_CLKSEL_OPP_SHIFT				0
-#define OMAP4430_CLKSEL_OPP_WIDTH				0x2
-#define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT			27
-#define OMAP4430_CLKSEL_PMD_STM_CLK_WIDTH			0x3
-#define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK			(0x7 << 24)
-#define OMAP4430_CLKSEL_SGX_FCLK_MASK				(1 << 24)
-#define OMAP4430_CLKSEL_SOURCE_MASK				(0x3 << 24)
-#define OMAP4430_CLKSEL_SOURCE_24_24_MASK			(1 << 24)
-#define OMAP4430_CLKSEL_UTMI_P1_SHIFT				24
-#define OMAP4430_CLKSEL_UTMI_P1_WIDTH				0x1
-#define OMAP4430_CLKSEL_UTMI_P2_SHIFT				25
-#define OMAP4430_CLKSEL_UTMI_P2_WIDTH				0x1
 #define OMAP4430_CLKTRCTRL_SHIFT				0
 #define OMAP4430_CLKTRCTRL_MASK					(0x3 << 0)
-#define OMAP4430_DPLL_BYP_CLKSEL_SHIFT				23
-#define OMAP4430_DPLL_BYP_CLKSEL_WIDTH				0x1
-#define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK			(0x1f << 0)
-#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT			8
-#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK			(1 << 10)
-#define OMAP4430_DPLL_CLKOUT_DIV_SHIFT				0
-#define OMAP4430_DPLL_CLKOUT_DIV_WIDTH				0x5
-#define OMAP4430_DPLL_CLKOUT_DIV_MASK				(0x1f << 0)
-#define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK			(0x7f << 0)
-#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK			(1 << 8)
-#define OMAP4430_DPLL_DIV_MASK					(0x7f << 0)
-#define OMAP4430_DPLL_DIV_0_7_MASK				(0xff << 0)
-#define OMAP4430_DPLL_EN_MASK					(0x7 << 0)
-#define OMAP4430_DPLL_LPMODE_EN_MASK				(1 << 10)
-#define OMAP4430_DPLL_MULT_MASK					(0x7ff << 8)
-#define OMAP4430_DPLL_MULT_USB_MASK				(0xfff << 8)
-#define OMAP4430_DPLL_REGM4XEN_MASK				(1 << 11)
-#define OMAP4430_DPLL_SD_DIV_MASK				(0xff << 24)
 #define OMAP4430_DSS_STATDEP_SHIFT				8
 #define OMAP4430_DUCATI_STATDEP_SHIFT				0
 #define OMAP4430_GFX_STATDEP_SHIFT				10
-#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK			(0x1f << 0)
-#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK			(0x1f << 0)
-#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK			(0x1f << 0)
-#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK			(0x1f << 0)
 #define OMAP4430_IDLEST_SHIFT					16
 #define OMAP4430_IDLEST_MASK					(0x3 << 16)
 #define OMAP4430_IVAHD_STATDEP_SHIFT				2
@@ -98,46 +38,5 @@
 #define OMAP4430_MEMIF_STATDEP_SHIFT				4
 #define OMAP4430_MODULEMODE_SHIFT				0
 #define OMAP4430_MODULEMODE_MASK				(0x3 << 0)
-#define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT			9
-#define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT			8
-#define OMAP4430_OPTFCLKEN_CLK32K_SHIFT				8
-#define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_DBCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_FCLK_SHIFT				8
-#define OMAP4430_OPTFCLKEN_FCLK0_SHIFT				8
-#define OMAP4430_OPTFCLKEN_FCLK1_SHIFT				9
-#define OMAP4430_OPTFCLKEN_FCLK2_SHIFT				10
-#define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT			15
-#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT		13
-#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT		14
-#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT			11
-#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT			12
-#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT		9
-#define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT			8
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT		11
-#define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT			10
-#define OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT				11
-#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT			9
-#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT			8
-#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT			9
-#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT			10
-#define OMAP4430_OPTFCLKEN_XCLK_SHIFT				8
-#define OMAP4430_PAD_CLKS_GATE_SHIFT				8
-#define OMAP4430_PMD_STM_MUX_CTRL_SHIFT				20
-#define OMAP4430_PMD_STM_MUX_CTRL_WIDTH				0x2
-#define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT			22
-#define OMAP4430_PMD_TRACE_MUX_CTRL_WIDTH			0x2
-#define OMAP4430_SCALE_FCLK_SHIFT				0
-#define OMAP4430_SCALE_FCLK_WIDTH				0x1
-#define OMAP4430_SLIMBUS_CLK_GATE_SHIFT				10
-#define OMAP4430_ST_DPLL_CLK_MASK				(1 << 0)
-#define OMAP4430_SYS_CLKSEL_SHIFT				0
-#define OMAP4430_SYS_CLKSEL_WIDTH				0x3
 #define OMAP4430_TESLA_STATDEP_SHIFT				1
 #endif
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index d02fe63dab59..14beb59e5f7b 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -26,7 +26,6 @@
 
 extern struct omap_domain_base cm_base;
 extern struct omap_domain_base cm2_base;
-extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2);
 # endif
 
 /*
diff --git a/arch/arm/mach-omap2/cm1_44xx.h b/arch/arm/mach-omap2/cm1_44xx.h
index 1a9725c7ad30..13710cefaf41 100644
--- a/arch/arm/mach-omap2/cm1_44xx.h
+++ b/arch/arm/mach-omap2/cm1_44xx.h
@@ -34,184 +34,10 @@
 #define OMAP4430_CM1_MPU_INST		0x0300
 #define OMAP4430_CM1_TESLA_INST		0x0400
 #define OMAP4430_CM1_ABE_INST		0x0500
-#define OMAP4430_CM1_RESTORE_INST	0x0e00
-#define OMAP4430_CM1_INSTR_INST		0x0f00
 
 /* CM1 clockdomain register offsets (from instance start) */
 #define OMAP4430_CM1_MPU_MPU_CDOFFS	0x0000
 #define OMAP4430_CM1_TESLA_TESLA_CDOFFS	0x0000
 #define OMAP4430_CM1_ABE_ABE_CDOFFS	0x0000
 
-/* CM1 */
-
-/* CM1.OCP_SOCKET_CM1 register offsets */
-#define OMAP4_REVISION_CM1_OFFSET			0x0000
-#define OMAP4430_REVISION_CM1				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_INST, 0x0000)
-#define OMAP4_CM_CM1_PROFILING_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_CM1_PROFILING_CLKCTRL		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_INST, 0x0040)
-
-/* CM1.CKGEN_CM1 register offsets */
-#define OMAP4_CM_CLKSEL_CORE_OFFSET			0x0000
-#define OMAP4430_CM_CLKSEL_CORE				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0000)
-#define OMAP4_CM_CLKSEL_ABE_OFFSET			0x0008
-#define OMAP4430_CM_CLKSEL_ABE				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0008)
-#define OMAP4_CM_DLL_CTRL_OFFSET			0x0010
-#define OMAP4430_CM_DLL_CTRL				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0010)
-#define OMAP4_CM_CLKMODE_DPLL_CORE_OFFSET		0x0020
-#define OMAP4430_CM_CLKMODE_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0020)
-#define OMAP4_CM_IDLEST_DPLL_CORE_OFFSET		0x0024
-#define OMAP4430_CM_IDLEST_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0024)
-#define OMAP4_CM_AUTOIDLE_DPLL_CORE_OFFSET		0x0028
-#define OMAP4430_CM_AUTOIDLE_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0028)
-#define OMAP4_CM_CLKSEL_DPLL_CORE_OFFSET		0x002c
-#define OMAP4430_CM_CLKSEL_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x002c)
-#define OMAP4_CM_DIV_M2_DPLL_CORE_OFFSET		0x0030
-#define OMAP4430_CM_DIV_M2_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0030)
-#define OMAP4_CM_DIV_M3_DPLL_CORE_OFFSET		0x0034
-#define OMAP4430_CM_DIV_M3_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0034)
-#define OMAP4_CM_DIV_M4_DPLL_CORE_OFFSET		0x0038
-#define OMAP4430_CM_DIV_M4_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0038)
-#define OMAP4_CM_DIV_M5_DPLL_CORE_OFFSET		0x003c
-#define OMAP4430_CM_DIV_M5_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x003c)
-#define OMAP4_CM_DIV_M6_DPLL_CORE_OFFSET		0x0040
-#define OMAP4430_CM_DIV_M6_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0040)
-#define OMAP4_CM_DIV_M7_DPLL_CORE_OFFSET		0x0044
-#define OMAP4430_CM_DIV_M7_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0044)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET	0x0048
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0048)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET	0x004c
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x004c)
-#define OMAP4_CM_EMU_OVERRIDE_DPLL_CORE_OFFSET		0x0050
-#define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0050)
-#define OMAP4_CM_CLKMODE_DPLL_MPU_OFFSET		0x0060
-#define OMAP4430_CM_CLKMODE_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0060)
-#define OMAP4_CM_IDLEST_DPLL_MPU_OFFSET			0x0064
-#define OMAP4430_CM_IDLEST_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0064)
-#define OMAP4_CM_AUTOIDLE_DPLL_MPU_OFFSET		0x0068
-#define OMAP4430_CM_AUTOIDLE_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0068)
-#define OMAP4_CM_CLKSEL_DPLL_MPU_OFFSET			0x006c
-#define OMAP4430_CM_CLKSEL_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x006c)
-#define OMAP4_CM_DIV_M2_DPLL_MPU_OFFSET			0x0070
-#define OMAP4430_CM_DIV_M2_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0070)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET		0x0088
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0088)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET		0x008c
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x008c)
-#define OMAP4_CM_BYPCLK_DPLL_MPU_OFFSET			0x009c
-#define OMAP4430_CM_BYPCLK_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x009c)
-#define OMAP4_CM_CLKMODE_DPLL_IVA_OFFSET		0x00a0
-#define OMAP4430_CM_CLKMODE_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00a0)
-#define OMAP4_CM_IDLEST_DPLL_IVA_OFFSET			0x00a4
-#define OMAP4430_CM_IDLEST_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00a4)
-#define OMAP4_CM_AUTOIDLE_DPLL_IVA_OFFSET		0x00a8
-#define OMAP4430_CM_AUTOIDLE_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00a8)
-#define OMAP4_CM_CLKSEL_DPLL_IVA_OFFSET			0x00ac
-#define OMAP4430_CM_CLKSEL_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00ac)
-#define OMAP4_CM_DIV_M4_DPLL_IVA_OFFSET			0x00b8
-#define OMAP4430_CM_DIV_M4_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00b8)
-#define OMAP4_CM_DIV_M5_DPLL_IVA_OFFSET			0x00bc
-#define OMAP4430_CM_DIV_M5_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00bc)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET		0x00c8
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00c8)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_IVA_OFFSET		0x00cc
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00cc)
-#define OMAP4_CM_BYPCLK_DPLL_IVA_OFFSET			0x00dc
-#define OMAP4430_CM_BYPCLK_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00dc)
-#define OMAP4_CM_CLKMODE_DPLL_ABE_OFFSET		0x00e0
-#define OMAP4430_CM_CLKMODE_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00e0)
-#define OMAP4_CM_IDLEST_DPLL_ABE_OFFSET			0x00e4
-#define OMAP4430_CM_IDLEST_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00e4)
-#define OMAP4_CM_AUTOIDLE_DPLL_ABE_OFFSET		0x00e8
-#define OMAP4430_CM_AUTOIDLE_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00e8)
-#define OMAP4_CM_CLKSEL_DPLL_ABE_OFFSET			0x00ec
-#define OMAP4430_CM_CLKSEL_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00ec)
-#define OMAP4_CM_DIV_M2_DPLL_ABE_OFFSET			0x00f0
-#define OMAP4430_CM_DIV_M2_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00f0)
-#define OMAP4_CM_DIV_M3_DPLL_ABE_OFFSET			0x00f4
-#define OMAP4430_CM_DIV_M3_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00f4)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET		0x0108
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0108)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_ABE_OFFSET		0x010c
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x010c)
-#define OMAP4_CM_CLKMODE_DPLL_DDRPHY_OFFSET		0x0120
-#define OMAP4430_CM_CLKMODE_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0120)
-#define OMAP4_CM_IDLEST_DPLL_DDRPHY_OFFSET		0x0124
-#define OMAP4430_CM_IDLEST_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0124)
-#define OMAP4_CM_AUTOIDLE_DPLL_DDRPHY_OFFSET		0x0128
-#define OMAP4430_CM_AUTOIDLE_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0128)
-#define OMAP4_CM_CLKSEL_DPLL_DDRPHY_OFFSET		0x012c
-#define OMAP4430_CM_CLKSEL_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x012c)
-#define OMAP4_CM_DIV_M2_DPLL_DDRPHY_OFFSET		0x0130
-#define OMAP4430_CM_DIV_M2_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0130)
-#define OMAP4_CM_DIV_M4_DPLL_DDRPHY_OFFSET		0x0138
-#define OMAP4430_CM_DIV_M4_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0138)
-#define OMAP4_CM_DIV_M5_DPLL_DDRPHY_OFFSET		0x013c
-#define OMAP4430_CM_DIV_M5_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x013c)
-#define OMAP4_CM_DIV_M6_DPLL_DDRPHY_OFFSET		0x0140
-#define OMAP4430_CM_DIV_M6_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0140)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_DDRPHY_OFFSET	0x0148
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0148)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_DDRPHY_OFFSET	0x014c
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x014c)
-#define OMAP4_CM_SHADOW_FREQ_CONFIG1_OFFSET		0x0160
-#define OMAP4430_CM_SHADOW_FREQ_CONFIG1			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0160)
-#define OMAP4_CM_SHADOW_FREQ_CONFIG2_OFFSET		0x0164
-#define OMAP4430_CM_SHADOW_FREQ_CONFIG2			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0164)
-#define OMAP4_CM_DYN_DEP_PRESCAL_OFFSET			0x0170
-#define OMAP4430_CM_DYN_DEP_PRESCAL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0170)
-#define OMAP4_CM_RESTORE_ST_OFFSET			0x0180
-#define OMAP4430_CM_RESTORE_ST				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0180)
-
-/* CM1.MPU_CM1 register offsets */
-#define OMAP4_CM_MPU_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_MPU_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_INST, 0x0000)
-#define OMAP4_CM_MPU_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_MPU_STATICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_INST, 0x0004)
-#define OMAP4_CM_MPU_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_MPU_DYNAMICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_INST, 0x0008)
-#define OMAP4_CM_MPU_MPU_CLKCTRL_OFFSET			0x0020
-#define OMAP4430_CM_MPU_MPU_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_INST, 0x0020)
-
-/* CM1.TESLA_CM1 register offsets */
-#define OMAP4_CM_TESLA_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_TESLA_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_INST, 0x0000)
-#define OMAP4_CM_TESLA_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_TESLA_STATICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_INST, 0x0004)
-#define OMAP4_CM_TESLA_DYNAMICDEP_OFFSET		0x0008
-#define OMAP4430_CM_TESLA_DYNAMICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_INST, 0x0008)
-#define OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_TESLA_TESLA_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_INST, 0x0020)
-
-/* CM1.ABE_CM1 register offsets */
-#define OMAP4_CM1_ABE_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM1_ABE_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0000)
-#define OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM1_ABE_L4ABE_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0020)
-#define OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM1_ABE_AESS_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0028)
-#define OMAP4_CM1_ABE_PDM_CLKCTRL_OFFSET		0x0030
-#define OMAP4430_CM1_ABE_PDM_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0030)
-#define OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET		0x0038
-#define OMAP4430_CM1_ABE_DMIC_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0038)
-#define OMAP4_CM1_ABE_MCASP_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM1_ABE_MCASP_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0040)
-#define OMAP4_CM1_ABE_MCBSP1_CLKCTRL_OFFSET		0x0048
-#define OMAP4430_CM1_ABE_MCBSP1_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0048)
-#define OMAP4_CM1_ABE_MCBSP2_CLKCTRL_OFFSET		0x0050
-#define OMAP4430_CM1_ABE_MCBSP2_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0050)
-#define OMAP4_CM1_ABE_MCBSP3_CLKCTRL_OFFSET		0x0058
-#define OMAP4430_CM1_ABE_MCBSP3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0058)
-#define OMAP4_CM1_ABE_SLIMBUS_CLKCTRL_OFFSET		0x0060
-#define OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0060)
-#define OMAP4_CM1_ABE_TIMER5_CLKCTRL_OFFSET		0x0068
-#define OMAP4430_CM1_ABE_TIMER5_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0068)
-#define OMAP4_CM1_ABE_TIMER6_CLKCTRL_OFFSET		0x0070
-#define OMAP4430_CM1_ABE_TIMER6_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0070)
-#define OMAP4_CM1_ABE_TIMER7_CLKCTRL_OFFSET		0x0078
-#define OMAP4430_CM1_ABE_TIMER7_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0078)
-#define OMAP4_CM1_ABE_TIMER8_CLKCTRL_OFFSET		0x0080
-#define OMAP4430_CM1_ABE_TIMER8_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0080)
-#define OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET		0x0088
-#define OMAP4430_CM1_ABE_WDT3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0088)
-
 #endif
diff --git a/arch/arm/mach-omap2/cm1_54xx.h b/arch/arm/mach-omap2/cm1_54xx.h
index eb86bbd93f35..fdca20aa49d9 100644
--- a/arch/arm/mach-omap2/cm1_54xx.h
+++ b/arch/arm/mach-omap2/cm1_54xx.h
@@ -30,178 +30,10 @@
 #define OMAP54XX_CM_CORE_AON_MPU_INST		0x0300
 #define OMAP54XX_CM_CORE_AON_DSP_INST		0x0400
 #define OMAP54XX_CM_CORE_AON_ABE_INST		0x0500
-#define OMAP54XX_CM_CORE_AON_RESTORE_INST	0x0e00
-#define OMAP54XX_CM_CORE_AON_INSTR_INST		0x0f00
 
 /* CM_CORE_AON clockdomain register offsets (from instance start) */
 #define OMAP54XX_CM_CORE_AON_MPU_MPU_CDOFFS	0x0000
 #define OMAP54XX_CM_CORE_AON_DSP_DSP_CDOFFS	0x0000
 #define OMAP54XX_CM_CORE_AON_ABE_ABE_CDOFFS	0x0000
 
-/* CM_CORE_AON */
-
-/* CM_CORE_AON.OCP_SOCKET_CM_CORE_AON register offsets */
-#define OMAP54XX_REVISION_CM_CORE_AON_OFFSET			0x0000
-#define OMAP54XX_CM_CM_CORE_AON_PROFILING_CLKCTRL_OFFSET	0x0040
-#define OMAP54XX_CM_CM_CORE_AON_PROFILING_CLKCTRL		OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_OCP_SOCKET_INST, 0x0040)
-#define OMAP54XX_CM_CORE_AON_DEBUG_CFG_OFFSET			0x0080
-#define OMAP54XX_CM_CORE_AON_DEBUG_OUT_OFFSET			0x0084
-#define OMAP54XX_CM_CORE_AON_DEBUG_MPU_FD_TRANS_OFFSET		0x0090
-#define OMAP54XX_CM_CORE_AON_DEBUG_DSP_FD_TRANS_OFFSET		0x0094
-#define OMAP54XX_CM_CORE_AON_DEBUG_ABE_FD_TRANS_OFFSET		0x0098
-#define OMAP54XX_CM_CORE_AON_DEBUG_ABE_FD_TRANS2_OFFSET		0x009c
-#define OMAP54XX_CM_CORE_AON_DEBUG_CM_CORE_AON_FD_TRANS_OFFSET	0x00a0
-#define OMAP54XX_CM_CORE_AON_DEBUG_C2C_FD_TRANS_OFFSET		0x00a4
-#define OMAP54XX_CM_CORE_AON_DEBUG_CAM_FD_TRANS_OFFSET		0x00a8
-#define OMAP54XX_CM_CORE_AON_DEBUG_COREAON_FD_TRANS_OFFSET	0x00ac
-#define OMAP54XX_CM_CORE_AON_DEBUG_CUSTEFUSE_FD_TRANS_OFFSET	0x00b0
-#define OMAP54XX_CM_CORE_AON_DEBUG_DMA_FD_TRANS_OFFSET		0x00b4
-#define OMAP54XX_CM_CORE_AON_DEBUG_DSS_FD_TRANS_OFFSET		0x00b8
-#define OMAP54XX_CM_CORE_AON_DEBUG_EMIF_FD_TRANS_OFFSET		0x00bc
-#define OMAP54XX_CM_CORE_AON_DEBUG_GPU_FD_TRANS_OFFSET		0x00c0
-#define OMAP54XX_CM_CORE_AON_DEBUG_IPU_FD_TRANS_OFFSET		0x00c4
-#define OMAP54XX_CM_CORE_AON_DEBUG_IVA_FD_TRANS_OFFSET		0x00c8
-#define OMAP54XX_CM_CORE_AON_DEBUG_L3INIT_FD_TRANS_OFFSET	0x00cc
-#define OMAP54XX_CM_CORE_AON_DEBUG_L3INIT_FD_TRANS2_OFFSET	0x00d0
-#define OMAP54XX_CM_CORE_AON_DEBUG_L3INSTR_FD_TRANS_OFFSET	0x00d4
-#define OMAP54XX_CM_CORE_AON_DEBUG_L3MAIN1_FD_TRANS_OFFSET	0x00d8
-#define OMAP54XX_CM_CORE_AON_DEBUG_L3MAIN2_FD_TRANS_OFFSET	0x00dc
-#define OMAP54XX_CM_CORE_AON_DEBUG_L4CFG_FD_TRANS_OFFSET	0x00e0
-#define OMAP54XX_CM_CORE_AON_DEBUG_L4PER_FD_TRANS_OFFSET	0x00e4
-#define OMAP54XX_CM_CORE_AON_DEBUG_L4PER_FD_TRANS2_OFFSET	0x00e8
-#define OMAP54XX_CM_CORE_AON_DEBUG_L4SEC_FD_TRANS_OFFSET	0x00ec
-#define OMAP54XX_CM_CORE_AON_DEBUG_MIPIEXT_FD_TRANS_OFFSET	0x00f0
-
-/* CM_CORE_AON.CKGEN_CM_CORE_AON register offsets */
-#define OMAP54XX_CM_CLKSEL_CORE_OFFSET				0x0000
-#define OMAP54XX_CM_CLKSEL_CORE					OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0000)
-#define OMAP54XX_CM_CLKSEL_ABE_OFFSET				0x0008
-#define OMAP54XX_CM_CLKSEL_ABE					OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0008)
-#define OMAP54XX_CM_DLL_CTRL_OFFSET				0x0010
-#define OMAP54XX_CM_CLKMODE_DPLL_CORE_OFFSET			0x0020
-#define OMAP54XX_CM_CLKMODE_DPLL_CORE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0020)
-#define OMAP54XX_CM_IDLEST_DPLL_CORE_OFFSET			0x0024
-#define OMAP54XX_CM_IDLEST_DPLL_CORE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0024)
-#define OMAP54XX_CM_AUTOIDLE_DPLL_CORE_OFFSET			0x0028
-#define OMAP54XX_CM_AUTOIDLE_DPLL_CORE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0028)
-#define OMAP54XX_CM_CLKSEL_DPLL_CORE_OFFSET			0x002c
-#define OMAP54XX_CM_CLKSEL_DPLL_CORE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x002c)
-#define OMAP54XX_CM_DIV_M2_DPLL_CORE_OFFSET			0x0030
-#define OMAP54XX_CM_DIV_M2_DPLL_CORE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0030)
-#define OMAP54XX_CM_DIV_M3_DPLL_CORE_OFFSET			0x0034
-#define OMAP54XX_CM_DIV_M3_DPLL_CORE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0034)
-#define OMAP54XX_CM_DIV_H11_DPLL_CORE_OFFSET			0x0038
-#define OMAP54XX_CM_DIV_H11_DPLL_CORE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0038)
-#define OMAP54XX_CM_DIV_H12_DPLL_CORE_OFFSET			0x003c
-#define OMAP54XX_CM_DIV_H12_DPLL_CORE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x003c)
-#define OMAP54XX_CM_DIV_H13_DPLL_CORE_OFFSET			0x0040
-#define OMAP54XX_CM_DIV_H13_DPLL_CORE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0040)
-#define OMAP54XX_CM_DIV_H14_DPLL_CORE_OFFSET			0x0044
-#define OMAP54XX_CM_DIV_H14_DPLL_CORE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0044)
-#define OMAP54XX_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET		0x0048
-#define OMAP54XX_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET		0x004c
-#define OMAP54XX_CM_DIV_H21_DPLL_CORE_OFFSET			0x0050
-#define OMAP54XX_CM_DIV_H21_DPLL_CORE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0050)
-#define OMAP54XX_CM_DIV_H22_DPLL_CORE_OFFSET			0x0054
-#define OMAP54XX_CM_DIV_H22_DPLL_CORE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0054)
-#define OMAP54XX_CM_DIV_H23_DPLL_CORE_OFFSET			0x0058
-#define OMAP54XX_CM_DIV_H23_DPLL_CORE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0058)
-#define OMAP54XX_CM_DIV_H24_DPLL_CORE_OFFSET			0x005c
-#define OMAP54XX_CM_DIV_H24_DPLL_CORE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x005c)
-#define OMAP54XX_CM_CLKMODE_DPLL_MPU_OFFSET			0x0060
-#define OMAP54XX_CM_CLKMODE_DPLL_MPU				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0060)
-#define OMAP54XX_CM_IDLEST_DPLL_MPU_OFFSET			0x0064
-#define OMAP54XX_CM_IDLEST_DPLL_MPU				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0064)
-#define OMAP54XX_CM_AUTOIDLE_DPLL_MPU_OFFSET			0x0068
-#define OMAP54XX_CM_AUTOIDLE_DPLL_MPU				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0068)
-#define OMAP54XX_CM_CLKSEL_DPLL_MPU_OFFSET			0x006c
-#define OMAP54XX_CM_CLKSEL_DPLL_MPU				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x006c)
-#define OMAP54XX_CM_DIV_M2_DPLL_MPU_OFFSET			0x0070
-#define OMAP54XX_CM_DIV_M2_DPLL_MPU				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x0070)
-#define OMAP54XX_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET		0x0088
-#define OMAP54XX_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET		0x008c
-#define OMAP54XX_CM_BYPCLK_DPLL_MPU_OFFSET			0x009c
-#define OMAP54XX_CM_BYPCLK_DPLL_MPU				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x009c)
-#define OMAP54XX_CM_CLKMODE_DPLL_IVA_OFFSET			0x00a0
-#define OMAP54XX_CM_CLKMODE_DPLL_IVA				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00a0)
-#define OMAP54XX_CM_IDLEST_DPLL_IVA_OFFSET			0x00a4
-#define OMAP54XX_CM_IDLEST_DPLL_IVA				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00a4)
-#define OMAP54XX_CM_AUTOIDLE_DPLL_IVA_OFFSET			0x00a8
-#define OMAP54XX_CM_AUTOIDLE_DPLL_IVA				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00a8)
-#define OMAP54XX_CM_CLKSEL_DPLL_IVA_OFFSET			0x00ac
-#define OMAP54XX_CM_CLKSEL_DPLL_IVA				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00ac)
-#define OMAP54XX_CM_DIV_H11_DPLL_IVA_OFFSET			0x00b8
-#define OMAP54XX_CM_DIV_H11_DPLL_IVA				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00b8)
-#define OMAP54XX_CM_DIV_H12_DPLL_IVA_OFFSET			0x00bc
-#define OMAP54XX_CM_DIV_H12_DPLL_IVA				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00bc)
-#define OMAP54XX_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET		0x00c8
-#define OMAP54XX_CM_SSC_MODFREQDIV_DPLL_IVA_OFFSET		0x00cc
-#define OMAP54XX_CM_BYPCLK_DPLL_IVA_OFFSET			0x00dc
-#define OMAP54XX_CM_BYPCLK_DPLL_IVA				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00dc)
-#define OMAP54XX_CM_CLKMODE_DPLL_ABE_OFFSET			0x00e0
-#define OMAP54XX_CM_CLKMODE_DPLL_ABE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00e0)
-#define OMAP54XX_CM_IDLEST_DPLL_ABE_OFFSET			0x00e4
-#define OMAP54XX_CM_IDLEST_DPLL_ABE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00e4)
-#define OMAP54XX_CM_AUTOIDLE_DPLL_ABE_OFFSET			0x00e8
-#define OMAP54XX_CM_AUTOIDLE_DPLL_ABE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00e8)
-#define OMAP54XX_CM_CLKSEL_DPLL_ABE_OFFSET			0x00ec
-#define OMAP54XX_CM_CLKSEL_DPLL_ABE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00ec)
-#define OMAP54XX_CM_DIV_M2_DPLL_ABE_OFFSET			0x00f0
-#define OMAP54XX_CM_DIV_M2_DPLL_ABE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00f0)
-#define OMAP54XX_CM_DIV_M3_DPLL_ABE_OFFSET			0x00f4
-#define OMAP54XX_CM_DIV_M3_DPLL_ABE				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_CKGEN_INST, 0x00f4)
-#define OMAP54XX_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET		0x0108
-#define OMAP54XX_CM_SSC_MODFREQDIV_DPLL_ABE_OFFSET		0x010c
-#define OMAP54XX_CM_SHADOW_FREQ_CONFIG1_OFFSET			0x0160
-#define OMAP54XX_CM_SHADOW_FREQ_CONFIG2_OFFSET			0x0164
-#define OMAP54XX_CM_DYN_DEP_PRESCAL_OFFSET			0x0170
-#define OMAP54XX_CM_RESTORE_ST_OFFSET				0x0180
-
-/* CM_CORE_AON.MPU_CM_CORE_AON register offsets */
-#define OMAP54XX_CM_MPU_CLKSTCTRL_OFFSET			0x0000
-#define OMAP54XX_CM_MPU_STATICDEP_OFFSET			0x0004
-#define OMAP54XX_CM_MPU_DYNAMICDEP_OFFSET			0x0008
-#define OMAP54XX_CM_MPU_MPU_CLKCTRL_OFFSET			0x0020
-#define OMAP54XX_CM_MPU_MPU_CLKCTRL				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_MPU_INST, 0x0020)
-#define OMAP54XX_CM_MPU_MPU_MPU_DBG_CLKCTRL_OFFSET		0x0028
-#define OMAP54XX_CM_MPU_MPU_MPU_DBG_CLKCTRL			OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_MPU_INST, 0x0028)
-
-/* CM_CORE_AON.DSP_CM_CORE_AON register offsets */
-#define OMAP54XX_CM_DSP_CLKSTCTRL_OFFSET			0x0000
-#define OMAP54XX_CM_DSP_STATICDEP_OFFSET			0x0004
-#define OMAP54XX_CM_DSP_DYNAMICDEP_OFFSET			0x0008
-#define OMAP54XX_CM_DSP_DSP_CLKCTRL_OFFSET			0x0020
-#define OMAP54XX_CM_DSP_DSP_CLKCTRL				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_DSP_INST, 0x0020)
-
-/* CM_CORE_AON.ABE_CM_CORE_AON register offsets */
-#define OMAP54XX_CM_ABE_CLKSTCTRL_OFFSET			0x0000
-#define OMAP54XX_CM_ABE_L4_ABE_CLKCTRL_OFFSET			0x0020
-#define OMAP54XX_CM_ABE_L4_ABE_CLKCTRL				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0020)
-#define OMAP54XX_CM_ABE_AESS_CLKCTRL_OFFSET			0x0028
-#define OMAP54XX_CM_ABE_AESS_CLKCTRL				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0028)
-#define OMAP54XX_CM_ABE_MCPDM_CLKCTRL_OFFSET			0x0030
-#define OMAP54XX_CM_ABE_MCPDM_CLKCTRL				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0030)
-#define OMAP54XX_CM_ABE_DMIC_CLKCTRL_OFFSET			0x0038
-#define OMAP54XX_CM_ABE_DMIC_CLKCTRL				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0038)
-#define OMAP54XX_CM_ABE_MCASP_CLKCTRL_OFFSET			0x0040
-#define OMAP54XX_CM_ABE_MCASP_CLKCTRL				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0040)
-#define OMAP54XX_CM_ABE_MCBSP1_CLKCTRL_OFFSET			0x0048
-#define OMAP54XX_CM_ABE_MCBSP1_CLKCTRL				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0048)
-#define OMAP54XX_CM_ABE_MCBSP2_CLKCTRL_OFFSET			0x0050
-#define OMAP54XX_CM_ABE_MCBSP2_CLKCTRL				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0050)
-#define OMAP54XX_CM_ABE_MCBSP3_CLKCTRL_OFFSET			0x0058
-#define OMAP54XX_CM_ABE_MCBSP3_CLKCTRL				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0058)
-#define OMAP54XX_CM_ABE_SLIMBUS1_CLKCTRL_OFFSET			0x0060
-#define OMAP54XX_CM_ABE_SLIMBUS1_CLKCTRL			OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0060)
-#define OMAP54XX_CM_ABE_TIMER5_CLKCTRL_OFFSET			0x0068
-#define OMAP54XX_CM_ABE_TIMER5_CLKCTRL				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0068)
-#define OMAP54XX_CM_ABE_TIMER6_CLKCTRL_OFFSET			0x0070
-#define OMAP54XX_CM_ABE_TIMER6_CLKCTRL				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0070)
-#define OMAP54XX_CM_ABE_TIMER7_CLKCTRL_OFFSET			0x0078
-#define OMAP54XX_CM_ABE_TIMER7_CLKCTRL				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0078)
-#define OMAP54XX_CM_ABE_TIMER8_CLKCTRL_OFFSET			0x0080
-#define OMAP54XX_CM_ABE_TIMER8_CLKCTRL				OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0080)
-#define OMAP54XX_CM_ABE_WD_TIMER3_CLKCTRL_OFFSET		0x0088
-#define OMAP54XX_CM_ABE_WD_TIMER3_CLKCTRL			OMAP54XX_CM_CORE_AON_REGADDR(OMAP54XX_CM_CORE_AON_ABE_INST, 0x0088)
-
 #endif
diff --git a/arch/arm/mach-omap2/cm1_7xx.h b/arch/arm/mach-omap2/cm1_7xx.h
index aae3831f5233..a543eb3db773 100644
--- a/arch/arm/mach-omap2/cm1_7xx.h
+++ b/arch/arm/mach-omap2/cm1_7xx.h
@@ -38,8 +38,6 @@
 #define DRA7XX_CM_CORE_AON_EVE4_INST		0x0700
 #define DRA7XX_CM_CORE_AON_RTC_INST		0x0740
 #define DRA7XX_CM_CORE_AON_VPE_INST		0x0760
-#define DRA7XX_CM_CORE_AON_RESTORE_INST		0x0e00
-#define DRA7XX_CM_CORE_AON_INSTR_INST		0x0f00
 
 /* CM_CORE_AON clockdomain register offsets (from instance start) */
 #define DRA7XX_CM_CORE_AON_MPU_MPU_CDOFFS	0x0000
@@ -54,265 +52,4 @@
 #define DRA7XX_CM_CORE_AON_RTC_RTC_CDOFFS	0x0000
 #define DRA7XX_CM_CORE_AON_VPE_VPE_CDOFFS	0x0000
 
-/* CM_CORE_AON */
-
-/* CM_CORE_AON.OCP_SOCKET_CM_CORE_AON register offsets */
-#define DRA7XX_REVISION_CM_CORE_AON_OFFSET		0x0000
-#define DRA7XX_CM_CM_CORE_AON_PROFILING_CLKCTRL_OFFSET	0x0040
-#define DRA7XX_CM_CM_CORE_AON_PROFILING_CLKCTRL		DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_OCP_SOCKET_INST, 0x0040)
-#define DRA7XX_CM_CORE_AON_DEBUG_OUT_OFFSET		0x00ec
-#define DRA7XX_CM_CORE_AON_DEBUG_CFG0_OFFSET		0x00f0
-#define DRA7XX_CM_CORE_AON_DEBUG_CFG1_OFFSET		0x00f4
-#define DRA7XX_CM_CORE_AON_DEBUG_CFG2_OFFSET		0x00f8
-#define DRA7XX_CM_CORE_AON_DEBUG_CFG3_OFFSET		0x00fc
-
-/* CM_CORE_AON.CKGEN_CM_CORE_AON register offsets */
-#define DRA7XX_CM_CLKSEL_CORE_OFFSET			0x0000
-#define DRA7XX_CM_CLKSEL_CORE				DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0000)
-#define DRA7XX_CM_CLKSEL_ABE_OFFSET			0x0008
-#define DRA7XX_CM_CLKSEL_ABE				DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0008)
-#define DRA7XX_CM_DLL_CTRL_OFFSET			0x0010
-#define DRA7XX_CM_CLKMODE_DPLL_CORE_OFFSET		0x0020
-#define DRA7XX_CM_CLKMODE_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0020)
-#define DRA7XX_CM_IDLEST_DPLL_CORE_OFFSET		0x0024
-#define DRA7XX_CM_IDLEST_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0024)
-#define DRA7XX_CM_AUTOIDLE_DPLL_CORE_OFFSET		0x0028
-#define DRA7XX_CM_AUTOIDLE_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0028)
-#define DRA7XX_CM_CLKSEL_DPLL_CORE_OFFSET		0x002c
-#define DRA7XX_CM_CLKSEL_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x002c)
-#define DRA7XX_CM_DIV_M2_DPLL_CORE_OFFSET		0x0030
-#define DRA7XX_CM_DIV_M2_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0030)
-#define DRA7XX_CM_DIV_M3_DPLL_CORE_OFFSET		0x0034
-#define DRA7XX_CM_DIV_M3_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0034)
-#define DRA7XX_CM_DIV_H11_DPLL_CORE_OFFSET		0x0038
-#define DRA7XX_CM_DIV_H11_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0038)
-#define DRA7XX_CM_DIV_H12_DPLL_CORE_OFFSET		0x003c
-#define DRA7XX_CM_DIV_H12_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x003c)
-#define DRA7XX_CM_DIV_H13_DPLL_CORE_OFFSET		0x0040
-#define DRA7XX_CM_DIV_H13_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0040)
-#define DRA7XX_CM_DIV_H14_DPLL_CORE_OFFSET		0x0044
-#define DRA7XX_CM_DIV_H14_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0044)
-#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET	0x0048
-#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET	0x004c
-#define DRA7XX_CM_DIV_H21_DPLL_CORE_OFFSET		0x0050
-#define DRA7XX_CM_DIV_H21_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0050)
-#define DRA7XX_CM_DIV_H22_DPLL_CORE_OFFSET		0x0054
-#define DRA7XX_CM_DIV_H22_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0054)
-#define DRA7XX_CM_DIV_H23_DPLL_CORE_OFFSET		0x0058
-#define DRA7XX_CM_DIV_H23_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0058)
-#define DRA7XX_CM_DIV_H24_DPLL_CORE_OFFSET		0x005c
-#define DRA7XX_CM_DIV_H24_DPLL_CORE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x005c)
-#define DRA7XX_CM_CLKMODE_DPLL_MPU_OFFSET		0x0060
-#define DRA7XX_CM_CLKMODE_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0060)
-#define DRA7XX_CM_IDLEST_DPLL_MPU_OFFSET		0x0064
-#define DRA7XX_CM_IDLEST_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0064)
-#define DRA7XX_CM_AUTOIDLE_DPLL_MPU_OFFSET		0x0068
-#define DRA7XX_CM_AUTOIDLE_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0068)
-#define DRA7XX_CM_CLKSEL_DPLL_MPU_OFFSET		0x006c
-#define DRA7XX_CM_CLKSEL_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x006c)
-#define DRA7XX_CM_DIV_M2_DPLL_MPU_OFFSET		0x0070
-#define DRA7XX_CM_DIV_M2_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0070)
-#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET	0x0088
-#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET	0x008c
-#define DRA7XX_CM_BYPCLK_DPLL_MPU_OFFSET		0x009c
-#define DRA7XX_CM_BYPCLK_DPLL_MPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x009c)
-#define DRA7XX_CM_CLKMODE_DPLL_IVA_OFFSET		0x00a0
-#define DRA7XX_CM_CLKMODE_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00a0)
-#define DRA7XX_CM_IDLEST_DPLL_IVA_OFFSET		0x00a4
-#define DRA7XX_CM_IDLEST_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00a4)
-#define DRA7XX_CM_AUTOIDLE_DPLL_IVA_OFFSET		0x00a8
-#define DRA7XX_CM_AUTOIDLE_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00a8)
-#define DRA7XX_CM_CLKSEL_DPLL_IVA_OFFSET		0x00ac
-#define DRA7XX_CM_CLKSEL_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00ac)
-#define DRA7XX_CM_DIV_M2_DPLL_IVA_OFFSET		0x00b0
-#define DRA7XX_CM_DIV_M2_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00b0)
-#define DRA7XX_CM_DIV_M3_DPLL_IVA_OFFSET		0x00b4
-#define DRA7XX_CM_DIV_M3_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00b4)
-#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET	0x00c8
-#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_IVA_OFFSET	0x00cc
-#define DRA7XX_CM_BYPCLK_DPLL_IVA_OFFSET		0x00dc
-#define DRA7XX_CM_BYPCLK_DPLL_IVA			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00dc)
-#define DRA7XX_CM_CLKMODE_DPLL_ABE_OFFSET		0x00e0
-#define DRA7XX_CM_CLKMODE_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00e0)
-#define DRA7XX_CM_IDLEST_DPLL_ABE_OFFSET		0x00e4
-#define DRA7XX_CM_IDLEST_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00e4)
-#define DRA7XX_CM_AUTOIDLE_DPLL_ABE_OFFSET		0x00e8
-#define DRA7XX_CM_AUTOIDLE_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00e8)
-#define DRA7XX_CM_CLKSEL_DPLL_ABE_OFFSET		0x00ec
-#define DRA7XX_CM_CLKSEL_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00ec)
-#define DRA7XX_CM_DIV_M2_DPLL_ABE_OFFSET		0x00f0
-#define DRA7XX_CM_DIV_M2_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00f0)
-#define DRA7XX_CM_DIV_M3_DPLL_ABE_OFFSET		0x00f4
-#define DRA7XX_CM_DIV_M3_DPLL_ABE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x00f4)
-#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET	0x0108
-#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_ABE_OFFSET	0x010c
-#define DRA7XX_CM_CLKMODE_DPLL_DDR_OFFSET		0x0110
-#define DRA7XX_CM_CLKMODE_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0110)
-#define DRA7XX_CM_IDLEST_DPLL_DDR_OFFSET		0x0114
-#define DRA7XX_CM_IDLEST_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0114)
-#define DRA7XX_CM_AUTOIDLE_DPLL_DDR_OFFSET		0x0118
-#define DRA7XX_CM_AUTOIDLE_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0118)
-#define DRA7XX_CM_CLKSEL_DPLL_DDR_OFFSET		0x011c
-#define DRA7XX_CM_CLKSEL_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x011c)
-#define DRA7XX_CM_DIV_M2_DPLL_DDR_OFFSET		0x0120
-#define DRA7XX_CM_DIV_M2_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0120)
-#define DRA7XX_CM_DIV_M3_DPLL_DDR_OFFSET		0x0124
-#define DRA7XX_CM_DIV_M3_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0124)
-#define DRA7XX_CM_DIV_H11_DPLL_DDR_OFFSET		0x0128
-#define DRA7XX_CM_DIV_H11_DPLL_DDR			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0128)
-#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_DDR_OFFSET	0x012c
-#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_DDR_OFFSET	0x0130
-#define DRA7XX_CM_CLKMODE_DPLL_DSP_OFFSET		0x0134
-#define DRA7XX_CM_CLKMODE_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0134)
-#define DRA7XX_CM_IDLEST_DPLL_DSP_OFFSET		0x0138
-#define DRA7XX_CM_IDLEST_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0138)
-#define DRA7XX_CM_AUTOIDLE_DPLL_DSP_OFFSET		0x013c
-#define DRA7XX_CM_AUTOIDLE_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x013c)
-#define DRA7XX_CM_CLKSEL_DPLL_DSP_OFFSET		0x0140
-#define DRA7XX_CM_CLKSEL_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0140)
-#define DRA7XX_CM_DIV_M2_DPLL_DSP_OFFSET		0x0144
-#define DRA7XX_CM_DIV_M2_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0144)
-#define DRA7XX_CM_DIV_M3_DPLL_DSP_OFFSET		0x0148
-#define DRA7XX_CM_DIV_M3_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0148)
-#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_DSP_OFFSET	0x014c
-#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_DSP_OFFSET	0x0150
-#define DRA7XX_CM_BYPCLK_DPLL_DSP_OFFSET		0x0154
-#define DRA7XX_CM_BYPCLK_DPLL_DSP			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0154)
-#define DRA7XX_CM_SHADOW_FREQ_CONFIG1_OFFSET		0x0160
-#define DRA7XX_CM_SHADOW_FREQ_CONFIG2_OFFSET		0x0164
-#define DRA7XX_CM_DYN_DEP_PRESCAL_OFFSET		0x0170
-#define DRA7XX_CM_RESTORE_ST_OFFSET			0x0180
-#define DRA7XX_CM_CLKMODE_DPLL_EVE_OFFSET		0x0184
-#define DRA7XX_CM_CLKMODE_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0184)
-#define DRA7XX_CM_IDLEST_DPLL_EVE_OFFSET		0x0188
-#define DRA7XX_CM_IDLEST_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0188)
-#define DRA7XX_CM_AUTOIDLE_DPLL_EVE_OFFSET		0x018c
-#define DRA7XX_CM_AUTOIDLE_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x018c)
-#define DRA7XX_CM_CLKSEL_DPLL_EVE_OFFSET		0x0190
-#define DRA7XX_CM_CLKSEL_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0190)
-#define DRA7XX_CM_DIV_M2_DPLL_EVE_OFFSET		0x0194
-#define DRA7XX_CM_DIV_M2_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0194)
-#define DRA7XX_CM_DIV_M3_DPLL_EVE_OFFSET		0x0198
-#define DRA7XX_CM_DIV_M3_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x0198)
-#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_EVE_OFFSET	0x019c
-#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_EVE_OFFSET	0x01a0
-#define DRA7XX_CM_BYPCLK_DPLL_EVE_OFFSET		0x01a4
-#define DRA7XX_CM_BYPCLK_DPLL_EVE			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01a4)
-#define DRA7XX_CM_CLKMODE_DPLL_GMAC_OFFSET		0x01a8
-#define DRA7XX_CM_CLKMODE_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01a8)
-#define DRA7XX_CM_IDLEST_DPLL_GMAC_OFFSET		0x01ac
-#define DRA7XX_CM_IDLEST_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01ac)
-#define DRA7XX_CM_AUTOIDLE_DPLL_GMAC_OFFSET		0x01b0
-#define DRA7XX_CM_AUTOIDLE_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01b0)
-#define DRA7XX_CM_CLKSEL_DPLL_GMAC_OFFSET		0x01b4
-#define DRA7XX_CM_CLKSEL_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01b4)
-#define DRA7XX_CM_DIV_M2_DPLL_GMAC_OFFSET		0x01b8
-#define DRA7XX_CM_DIV_M2_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01b8)
-#define DRA7XX_CM_DIV_M3_DPLL_GMAC_OFFSET		0x01bc
-#define DRA7XX_CM_DIV_M3_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01bc)
-#define DRA7XX_CM_DIV_H11_DPLL_GMAC_OFFSET		0x01c0
-#define DRA7XX_CM_DIV_H11_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01c0)
-#define DRA7XX_CM_DIV_H12_DPLL_GMAC_OFFSET		0x01c4
-#define DRA7XX_CM_DIV_H12_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01c4)
-#define DRA7XX_CM_DIV_H13_DPLL_GMAC_OFFSET		0x01c8
-#define DRA7XX_CM_DIV_H13_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01c8)
-#define DRA7XX_CM_DIV_H14_DPLL_GMAC_OFFSET		0x01cc
-#define DRA7XX_CM_DIV_H14_DPLL_GMAC			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01cc)
-#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_GMAC_OFFSET	0x01d0
-#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_GMAC_OFFSET	0x01d4
-#define DRA7XX_CM_CLKMODE_DPLL_GPU_OFFSET		0x01d8
-#define DRA7XX_CM_CLKMODE_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01d8)
-#define DRA7XX_CM_IDLEST_DPLL_GPU_OFFSET		0x01dc
-#define DRA7XX_CM_IDLEST_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01dc)
-#define DRA7XX_CM_AUTOIDLE_DPLL_GPU_OFFSET		0x01e0
-#define DRA7XX_CM_AUTOIDLE_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01e0)
-#define DRA7XX_CM_CLKSEL_DPLL_GPU_OFFSET		0x01e4
-#define DRA7XX_CM_CLKSEL_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01e4)
-#define DRA7XX_CM_DIV_M2_DPLL_GPU_OFFSET		0x01e8
-#define DRA7XX_CM_DIV_M2_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01e8)
-#define DRA7XX_CM_DIV_M3_DPLL_GPU_OFFSET		0x01ec
-#define DRA7XX_CM_DIV_M3_DPLL_GPU			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_CKGEN_INST, 0x01ec)
-#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_GPU_OFFSET	0x01f0
-#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_GPU_OFFSET	0x01f4
-
-/* CM_CORE_AON.MPU_CM_CORE_AON register offsets */
-#define DRA7XX_CM_MPU_CLKSTCTRL_OFFSET			0x0000
-#define DRA7XX_CM_MPU_STATICDEP_OFFSET			0x0004
-#define DRA7XX_CM_MPU_DYNAMICDEP_OFFSET			0x0008
-#define DRA7XX_CM_MPU_MPU_CLKCTRL_OFFSET		0x0020
-#define DRA7XX_CM_MPU_MPU_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_MPU_INST, 0x0020)
-#define DRA7XX_CM_MPU_MPU_MPU_DBG_CLKCTRL_OFFSET	0x0028
-#define DRA7XX_CM_MPU_MPU_MPU_DBG_CLKCTRL		DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_MPU_INST, 0x0028)
-
-/* CM_CORE_AON.DSP1_CM_CORE_AON register offsets */
-#define DRA7XX_CM_DSP1_CLKSTCTRL_OFFSET			0x0000
-#define DRA7XX_CM_DSP1_STATICDEP_OFFSET			0x0004
-#define DRA7XX_CM_DSP1_DYNAMICDEP_OFFSET		0x0008
-#define DRA7XX_CM_DSP1_DSP1_CLKCTRL_OFFSET		0x0020
-#define DRA7XX_CM_DSP1_DSP1_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_DSP1_INST, 0x0020)
-
-/* CM_CORE_AON.IPU_CM_CORE_AON register offsets */
-#define DRA7XX_CM_IPU1_CLKSTCTRL_OFFSET			0x0000
-#define DRA7XX_CM_IPU1_STATICDEP_OFFSET			0x0004
-#define DRA7XX_CM_IPU1_DYNAMICDEP_OFFSET		0x0008
-#define DRA7XX_CM_IPU1_IPU1_CLKCTRL_OFFSET		0x0020
-#define DRA7XX_CM_IPU1_IPU1_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0020)
-#define DRA7XX_CM_IPU_CLKSTCTRL_OFFSET			0x0040
-#define DRA7XX_CM_IPU_MCASP1_CLKCTRL_OFFSET		0x0050
-#define DRA7XX_CM_IPU_MCASP1_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0050)
-#define DRA7XX_CM_IPU_TIMER5_CLKCTRL_OFFSET		0x0058
-#define DRA7XX_CM_IPU_TIMER5_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0058)
-#define DRA7XX_CM_IPU_TIMER6_CLKCTRL_OFFSET		0x0060
-#define DRA7XX_CM_IPU_TIMER6_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0060)
-#define DRA7XX_CM_IPU_TIMER7_CLKCTRL_OFFSET		0x0068
-#define DRA7XX_CM_IPU_TIMER7_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0068)
-#define DRA7XX_CM_IPU_TIMER8_CLKCTRL_OFFSET		0x0070
-#define DRA7XX_CM_IPU_TIMER8_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0070)
-#define DRA7XX_CM_IPU_I2C5_CLKCTRL_OFFSET		0x0078
-#define DRA7XX_CM_IPU_I2C5_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0078)
-#define DRA7XX_CM_IPU_UART6_CLKCTRL_OFFSET		0x0080
-#define DRA7XX_CM_IPU_UART6_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_IPU_INST, 0x0080)
-
-/* CM_CORE_AON.DSP2_CM_CORE_AON register offsets */
-#define DRA7XX_CM_DSP2_CLKSTCTRL_OFFSET			0x0000
-#define DRA7XX_CM_DSP2_STATICDEP_OFFSET			0x0004
-#define DRA7XX_CM_DSP2_DYNAMICDEP_OFFSET		0x0008
-#define DRA7XX_CM_DSP2_DSP2_CLKCTRL_OFFSET		0x0020
-#define DRA7XX_CM_DSP2_DSP2_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_DSP2_INST, 0x0020)
-
-/* CM_CORE_AON.EVE1_CM_CORE_AON register offsets */
-#define DRA7XX_CM_EVE1_CLKSTCTRL_OFFSET			0x0000
-#define DRA7XX_CM_EVE1_STATICDEP_OFFSET			0x0004
-#define DRA7XX_CM_EVE1_EVE1_CLKCTRL_OFFSET		0x0020
-#define DRA7XX_CM_EVE1_EVE1_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_EVE1_INST, 0x0020)
-
-/* CM_CORE_AON.EVE2_CM_CORE_AON register offsets */
-#define DRA7XX_CM_EVE2_CLKSTCTRL_OFFSET			0x0000
-#define DRA7XX_CM_EVE2_STATICDEP_OFFSET			0x0004
-#define DRA7XX_CM_EVE2_EVE2_CLKCTRL_OFFSET		0x0020
-#define DRA7XX_CM_EVE2_EVE2_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_EVE2_INST, 0x0020)
-
-/* CM_CORE_AON.EVE3_CM_CORE_AON register offsets */
-#define DRA7XX_CM_EVE3_CLKSTCTRL_OFFSET			0x0000
-#define DRA7XX_CM_EVE3_STATICDEP_OFFSET			0x0004
-#define DRA7XX_CM_EVE3_EVE3_CLKCTRL_OFFSET		0x0020
-#define DRA7XX_CM_EVE3_EVE3_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_EVE3_INST, 0x0020)
-
-/* CM_CORE_AON.EVE4_CM_CORE_AON register offsets */
-#define DRA7XX_CM_EVE4_CLKSTCTRL_OFFSET			0x0000
-#define DRA7XX_CM_EVE4_STATICDEP_OFFSET			0x0004
-#define DRA7XX_CM_EVE4_EVE4_CLKCTRL_OFFSET		0x0020
-#define DRA7XX_CM_EVE4_EVE4_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_EVE4_INST, 0x0020)
-
-/* CM_CORE_AON.RTC_CM_CORE_AON register offsets */
-#define DRA7XX_CM_RTC_CLKSTCTRL_OFFSET			0x0000
-#define DRA7XX_CM_RTC_RTCSS_CLKCTRL_OFFSET		0x0004
-#define DRA7XX_CM_RTC_RTCSS_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_RTC_INST, 0x0004)
-
-/* CM_CORE_AON.VPE_CM_CORE_AON register offsets */
-#define DRA7XX_CM_VPE_CLKSTCTRL_OFFSET			0x0000
-#define DRA7XX_CM_VPE_VPE_CLKCTRL_OFFSET		0x0004
-#define DRA7XX_CM_VPE_VPE_CLKCTRL			DRA7XX_CM_CORE_AON_REGADDR(DRA7XX_CM_CORE_AON_VPE_INST, 0x0004)
-#define DRA7XX_CM_VPE_STATICDEP_OFFSET			0x0008
-
 #endif
diff --git a/arch/arm/mach-omap2/cm2_44xx.h b/arch/arm/mach-omap2/cm2_44xx.h
index 370d295446b6..7f9b7a81f153 100644
--- a/arch/arm/mach-omap2/cm2_44xx.h
+++ b/arch/arm/mach-omap2/cm2_44xx.h
@@ -40,8 +40,6 @@
 #define OMAP4430_CM2_L3INIT_INST	0x1300
 #define OMAP4430_CM2_L4PER_INST		0x1400
 #define OMAP4430_CM2_CEFUSE_INST	0x1600
-#define OMAP4430_CM2_RESTORE_INST	0x1e00
-#define OMAP4430_CM2_INSTR_INST		0x1f00
 
 /* CM2 clockdomain register offsets (from instance start) */
 #define OMAP4430_CM2_ALWAYS_ON_ALWON_CDOFFS	0x0000
@@ -62,388 +60,4 @@
 #define OMAP4430_CM2_L4PER_L4SEC_CDOFFS		0x0180
 #define OMAP4430_CM2_CEFUSE_CEFUSE_CDOFFS	0x0000
 
-/* CM2 */
-
-/* CM2.OCP_SOCKET_CM2 register offsets */
-#define OMAP4_REVISION_CM2_OFFSET			0x0000
-#define OMAP4430_REVISION_CM2				OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_INST, 0x0000)
-#define OMAP4_CM_CM2_PROFILING_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_CM2_PROFILING_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_INST, 0x0040)
-
-/* CM2.CKGEN_CM2 register offsets */
-#define OMAP4_CM_CLKSEL_DUCATI_ISS_ROOT_OFFSET		0x0000
-#define OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0000)
-#define OMAP4_CM_CLKSEL_USB_60MHZ_OFFSET		0x0004
-#define OMAP4430_CM_CLKSEL_USB_60MHZ			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0004)
-#define OMAP4_CM_SCALE_FCLK_OFFSET			0x0008
-#define OMAP4430_CM_SCALE_FCLK				OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0008)
-#define OMAP4_CM_CORE_DVFS_PERF1_OFFSET			0x0010
-#define OMAP4430_CM_CORE_DVFS_PERF1			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0010)
-#define OMAP4_CM_CORE_DVFS_PERF2_OFFSET			0x0014
-#define OMAP4430_CM_CORE_DVFS_PERF2			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0014)
-#define OMAP4_CM_CORE_DVFS_PERF3_OFFSET			0x0018
-#define OMAP4430_CM_CORE_DVFS_PERF3			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0018)
-#define OMAP4_CM_CORE_DVFS_PERF4_OFFSET			0x001c
-#define OMAP4430_CM_CORE_DVFS_PERF4			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x001c)
-#define OMAP4_CM_CORE_DVFS_CURRENT_OFFSET		0x0024
-#define OMAP4430_CM_CORE_DVFS_CURRENT			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0024)
-#define OMAP4_CM_IVA_DVFS_PERF_TESLA_OFFSET		0x0028
-#define OMAP4430_CM_IVA_DVFS_PERF_TESLA			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0028)
-#define OMAP4_CM_IVA_DVFS_PERF_IVAHD_OFFSET		0x002c
-#define OMAP4430_CM_IVA_DVFS_PERF_IVAHD			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x002c)
-#define OMAP4_CM_IVA_DVFS_PERF_ABE_OFFSET		0x0030
-#define OMAP4430_CM_IVA_DVFS_PERF_ABE			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0030)
-#define OMAP4_CM_IVA_DVFS_CURRENT_OFFSET		0x0038
-#define OMAP4430_CM_IVA_DVFS_CURRENT			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0038)
-#define OMAP4_CM_CLKMODE_DPLL_PER_OFFSET		0x0040
-#define OMAP4430_CM_CLKMODE_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0040)
-#define OMAP4_CM_IDLEST_DPLL_PER_OFFSET			0x0044
-#define OMAP4430_CM_IDLEST_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0044)
-#define OMAP4_CM_AUTOIDLE_DPLL_PER_OFFSET		0x0048
-#define OMAP4430_CM_AUTOIDLE_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0048)
-#define OMAP4_CM_CLKSEL_DPLL_PER_OFFSET			0x004c
-#define OMAP4430_CM_CLKSEL_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x004c)
-#define OMAP4_CM_DIV_M2_DPLL_PER_OFFSET			0x0050
-#define OMAP4430_CM_DIV_M2_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0050)
-#define OMAP4_CM_DIV_M3_DPLL_PER_OFFSET			0x0054
-#define OMAP4430_CM_DIV_M3_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0054)
-#define OMAP4_CM_DIV_M4_DPLL_PER_OFFSET			0x0058
-#define OMAP4430_CM_DIV_M4_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0058)
-#define OMAP4_CM_DIV_M5_DPLL_PER_OFFSET			0x005c
-#define OMAP4430_CM_DIV_M5_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x005c)
-#define OMAP4_CM_DIV_M6_DPLL_PER_OFFSET			0x0060
-#define OMAP4430_CM_DIV_M6_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0060)
-#define OMAP4_CM_DIV_M7_DPLL_PER_OFFSET			0x0064
-#define OMAP4430_CM_DIV_M7_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0064)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET		0x0068
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0068)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET		0x006c
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x006c)
-#define OMAP4_CM_CLKMODE_DPLL_USB_OFFSET		0x0080
-#define OMAP4430_CM_CLKMODE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0080)
-#define OMAP4_CM_IDLEST_DPLL_USB_OFFSET			0x0084
-#define OMAP4430_CM_IDLEST_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0084)
-#define OMAP4_CM_AUTOIDLE_DPLL_USB_OFFSET		0x0088
-#define OMAP4430_CM_AUTOIDLE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0088)
-#define OMAP4_CM_CLKSEL_DPLL_USB_OFFSET			0x008c
-#define OMAP4430_CM_CLKSEL_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x008c)
-#define OMAP4_CM_DIV_M2_DPLL_USB_OFFSET			0x0090
-#define OMAP4430_CM_DIV_M2_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0090)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET		0x00a8
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00a8)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_USB_OFFSET		0x00ac
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ac)
-#define OMAP4_CM_CLKDCOLDO_DPLL_USB_OFFSET		0x00b4
-#define OMAP4430_CM_CLKDCOLDO_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00b4)
-#define OMAP4_CM_CLKMODE_DPLL_UNIPRO_OFFSET		0x00c0
-#define OMAP4430_CM_CLKMODE_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00c0)
-#define OMAP4_CM_IDLEST_DPLL_UNIPRO_OFFSET		0x00c4
-#define OMAP4430_CM_IDLEST_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00c4)
-#define OMAP4_CM_AUTOIDLE_DPLL_UNIPRO_OFFSET		0x00c8
-#define OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00c8)
-#define OMAP4_CM_CLKSEL_DPLL_UNIPRO_OFFSET		0x00cc
-#define OMAP4430_CM_CLKSEL_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00cc)
-#define OMAP4_CM_DIV_M2_DPLL_UNIPRO_OFFSET		0x00d0
-#define OMAP4430_CM_DIV_M2_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00d0)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_UNIPRO_OFFSET	0x00e8
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00e8)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_UNIPRO_OFFSET	0x00ec
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ec)
-
-/* CM2.ALWAYS_ON_CM2 register offsets */
-#define OMAP4_CM_ALWON_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_ALWON_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0000)
-#define OMAP4_CM_ALWON_MDMINTC_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_ALWON_MDMINTC_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0020)
-#define OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_ALWON_SR_MPU_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0028)
-#define OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET		0x0030
-#define OMAP4430_CM_ALWON_SR_IVA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0030)
-#define OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET		0x0038
-#define OMAP4430_CM_ALWON_SR_CORE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0038)
-#define OMAP4_CM_ALWON_USBPHY_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_ALWON_USBPHY_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0040)
-
-/* CM2.CORE_CM2 register offsets */
-#define OMAP4_CM_L3_1_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_L3_1_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0000)
-#define OMAP4_CM_L3_1_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_L3_1_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0008)
-#define OMAP4_CM_L3_1_L3_1_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_L3_1_L3_1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0020)
-#define OMAP4_CM_L3_2_CLKSTCTRL_OFFSET			0x0100
-#define OMAP4430_CM_L3_2_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0100)
-#define OMAP4_CM_L3_2_DYNAMICDEP_OFFSET			0x0108
-#define OMAP4430_CM_L3_2_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0108)
-#define OMAP4_CM_L3_2_L3_2_CLKCTRL_OFFSET		0x0120
-#define OMAP4430_CM_L3_2_L3_2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0120)
-#define OMAP4_CM_L3_2_GPMC_CLKCTRL_OFFSET		0x0128
-#define OMAP4430_CM_L3_2_GPMC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0128)
-#define OMAP4_CM_L3_2_OCMC_RAM_CLKCTRL_OFFSET		0x0130
-#define OMAP4430_CM_L3_2_OCMC_RAM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0130)
-#define OMAP4_CM_DUCATI_CLKSTCTRL_OFFSET		0x0200
-#define OMAP4430_CM_DUCATI_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0200)
-#define OMAP4_CM_DUCATI_STATICDEP_OFFSET		0x0204
-#define OMAP4430_CM_DUCATI_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0204)
-#define OMAP4_CM_DUCATI_DYNAMICDEP_OFFSET		0x0208
-#define OMAP4430_CM_DUCATI_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0208)
-#define OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET		0x0220
-#define OMAP4430_CM_DUCATI_DUCATI_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0220)
-#define OMAP4_CM_SDMA_CLKSTCTRL_OFFSET			0x0300
-#define OMAP4430_CM_SDMA_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0300)
-#define OMAP4_CM_SDMA_STATICDEP_OFFSET			0x0304
-#define OMAP4430_CM_SDMA_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0304)
-#define OMAP4_CM_SDMA_DYNAMICDEP_OFFSET			0x0308
-#define OMAP4430_CM_SDMA_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0308)
-#define OMAP4_CM_SDMA_SDMA_CLKCTRL_OFFSET		0x0320
-#define OMAP4430_CM_SDMA_SDMA_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0320)
-#define OMAP4_CM_MEMIF_CLKSTCTRL_OFFSET			0x0400
-#define OMAP4430_CM_MEMIF_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0400)
-#define OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET		0x0420
-#define OMAP4430_CM_MEMIF_DMM_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0420)
-#define OMAP4_CM_MEMIF_EMIF_FW_CLKCTRL_OFFSET		0x0428
-#define OMAP4430_CM_MEMIF_EMIF_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0428)
-#define OMAP4_CM_MEMIF_EMIF_1_CLKCTRL_OFFSET		0x0430
-#define OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0430)
-#define OMAP4_CM_MEMIF_EMIF_2_CLKCTRL_OFFSET		0x0438
-#define OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0438)
-#define OMAP4_CM_MEMIF_DLL_CLKCTRL_OFFSET		0x0440
-#define OMAP4430_CM_MEMIF_DLL_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0440)
-#define OMAP4_CM_MEMIF_EMIF_H1_CLKCTRL_OFFSET		0x0450
-#define OMAP4430_CM_MEMIF_EMIF_H1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0450)
-#define OMAP4_CM_MEMIF_EMIF_H2_CLKCTRL_OFFSET		0x0458
-#define OMAP4430_CM_MEMIF_EMIF_H2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0458)
-#define OMAP4_CM_MEMIF_DLL_H_CLKCTRL_OFFSET		0x0460
-#define OMAP4430_CM_MEMIF_DLL_H_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0460)
-#define OMAP4_CM_D2D_CLKSTCTRL_OFFSET			0x0500
-#define OMAP4430_CM_D2D_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0500)
-#define OMAP4_CM_D2D_STATICDEP_OFFSET			0x0504
-#define OMAP4430_CM_D2D_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0504)
-#define OMAP4_CM_D2D_DYNAMICDEP_OFFSET			0x0508
-#define OMAP4430_CM_D2D_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0508)
-#define OMAP4_CM_D2D_SAD2D_CLKCTRL_OFFSET		0x0520
-#define OMAP4430_CM_D2D_SAD2D_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0520)
-#define OMAP4_CM_D2D_MODEM_ICR_CLKCTRL_OFFSET		0x0528
-#define OMAP4430_CM_D2D_MODEM_ICR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0528)
-#define OMAP4_CM_D2D_SAD2D_FW_CLKCTRL_OFFSET		0x0530
-#define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0530)
-#define OMAP4_CM_L4CFG_CLKSTCTRL_OFFSET			0x0600
-#define OMAP4430_CM_L4CFG_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0600)
-#define OMAP4_CM_L4CFG_DYNAMICDEP_OFFSET		0x0608
-#define OMAP4430_CM_L4CFG_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0608)
-#define OMAP4_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET		0x0620
-#define OMAP4430_CM_L4CFG_L4_CFG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0620)
-#define OMAP4_CM_L4CFG_HW_SEM_CLKCTRL_OFFSET		0x0628
-#define OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0628)
-#define OMAP4_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET		0x0630
-#define OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0630)
-#define OMAP4_CM_L4CFG_SAR_ROM_CLKCTRL_OFFSET		0x0638
-#define OMAP4430_CM_L4CFG_SAR_ROM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0638)
-#define OMAP4_CM_L3INSTR_CLKSTCTRL_OFFSET		0x0700
-#define OMAP4430_CM_L3INSTR_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0700)
-#define OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET		0x0720
-#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0720)
-#define OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET	0x0728
-#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0728)
-#define OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_OFFSET		0x0740
-#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0740)
-
-/* CM2.IVAHD_CM2 register offsets */
-#define OMAP4_CM_IVAHD_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_IVAHD_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_INST, 0x0000)
-#define OMAP4_CM_IVAHD_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_IVAHD_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_INST, 0x0004)
-#define OMAP4_CM_IVAHD_DYNAMICDEP_OFFSET		0x0008
-#define OMAP4430_CM_IVAHD_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_INST, 0x0008)
-#define OMAP4_CM_IVAHD_IVAHD_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_IVAHD_IVAHD_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_INST, 0x0020)
-#define OMAP4_CM_IVAHD_SL2_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_IVAHD_SL2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_INST, 0x0028)
-
-/* CM2.CAM_CM2 register offsets */
-#define OMAP4_CM_CAM_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_CAM_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_INST, 0x0000)
-#define OMAP4_CM_CAM_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_CAM_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_INST, 0x0004)
-#define OMAP4_CM_CAM_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_CAM_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_INST, 0x0008)
-#define OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET			0x0020
-#define OMAP4430_CM_CAM_ISS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_INST, 0x0020)
-#define OMAP4_CM_CAM_FDIF_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_CAM_FDIF_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_INST, 0x0028)
-
-/* CM2.DSS_CM2 register offsets */
-#define OMAP4_CM_DSS_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_DSS_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_INST, 0x0000)
-#define OMAP4_CM_DSS_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_DSS_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_INST, 0x0004)
-#define OMAP4_CM_DSS_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_DSS_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_INST, 0x0008)
-#define OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET			0x0020
-#define OMAP4430_CM_DSS_DSS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_INST, 0x0020)
-#define OMAP4_CM_DSS_DEISS_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_DSS_DEISS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_INST, 0x0028)
-
-/* CM2.GFX_CM2 register offsets */
-#define OMAP4_CM_GFX_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_GFX_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_INST, 0x0000)
-#define OMAP4_CM_GFX_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_GFX_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_INST, 0x0004)
-#define OMAP4_CM_GFX_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_GFX_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_INST, 0x0008)
-#define OMAP4_CM_GFX_GFX_CLKCTRL_OFFSET			0x0020
-#define OMAP4430_CM_GFX_GFX_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_INST, 0x0020)
-
-/* CM2.L3INIT_CM2 register offsets */
-#define OMAP4_CM_L3INIT_CLKSTCTRL_OFFSET		0x0000
-#define OMAP4430_CM_L3INIT_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0000)
-#define OMAP4_CM_L3INIT_STATICDEP_OFFSET		0x0004
-#define OMAP4430_CM_L3INIT_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0004)
-#define OMAP4_CM_L3INIT_DYNAMICDEP_OFFSET		0x0008
-#define OMAP4430_CM_L3INIT_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0008)
-#define OMAP4_CM_L3INIT_MMC1_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_L3INIT_MMC1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0028)
-#define OMAP4_CM_L3INIT_MMC2_CLKCTRL_OFFSET		0x0030
-#define OMAP4430_CM_L3INIT_MMC2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0030)
-#define OMAP4_CM_L3INIT_HSI_CLKCTRL_OFFSET		0x0038
-#define OMAP4430_CM_L3INIT_HSI_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0038)
-#define OMAP4_CM_L3INIT_UNIPRO1_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0040)
-#define OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET		0x0058
-#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0058)
-#define OMAP4_CM_L3INIT_USB_OTG_CLKCTRL_OFFSET		0x0060
-#define OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0060)
-#define OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET		0x0068
-#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0068)
-#define OMAP4_CM_L3INIT_P1500_CLKCTRL_OFFSET		0x0078
-#define OMAP4430_CM_L3INIT_P1500_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0078)
-#define OMAP4_CM_L3INIT_EMAC_CLKCTRL_OFFSET		0x0080
-#define OMAP4430_CM_L3INIT_EMAC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0080)
-#define OMAP4_CM_L3INIT_SATA_CLKCTRL_OFFSET		0x0088
-#define OMAP4430_CM_L3INIT_SATA_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0088)
-#define OMAP4_CM_L3INIT_TPPSS_CLKCTRL_OFFSET		0x0090
-#define OMAP4430_CM_L3INIT_TPPSS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0090)
-#define OMAP4_CM_L3INIT_PCIESS_CLKCTRL_OFFSET		0x0098
-#define OMAP4430_CM_L3INIT_PCIESS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0098)
-#define OMAP4_CM_L3INIT_CCPTX_CLKCTRL_OFFSET		0x00a8
-#define OMAP4430_CM_L3INIT_CCPTX_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x00a8)
-#define OMAP4_CM_L3INIT_XHPI_CLKCTRL_OFFSET		0x00c0
-#define OMAP4430_CM_L3INIT_XHPI_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x00c0)
-#define OMAP4_CM_L3INIT_MMC6_CLKCTRL_OFFSET		0x00c8
-#define OMAP4430_CM_L3INIT_MMC6_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x00c8)
-#define OMAP4_CM_L3INIT_USB_HOST_FS_CLKCTRL_OFFSET	0x00d0
-#define OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x00d0)
-#define OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET	0x00e0
-#define OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x00e0)
-
-/* CM2.L4PER_CM2 register offsets */
-#define OMAP4_CM_L4PER_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_L4PER_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0000)
-#define OMAP4_CM_L4PER_DYNAMICDEP_OFFSET		0x0008
-#define OMAP4430_CM_L4PER_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0008)
-#define OMAP4_CM_L4PER_ADC_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_L4PER_ADC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0020)
-#define OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0028)
-#define OMAP4_CM_L4PER_DMTIMER11_CLKCTRL_OFFSET		0x0030
-#define OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0030)
-#define OMAP4_CM_L4PER_DMTIMER2_CLKCTRL_OFFSET		0x0038
-#define OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0038)
-#define OMAP4_CM_L4PER_DMTIMER3_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0040)
-#define OMAP4_CM_L4PER_DMTIMER4_CLKCTRL_OFFSET		0x0048
-#define OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0048)
-#define OMAP4_CM_L4PER_DMTIMER9_CLKCTRL_OFFSET		0x0050
-#define OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0050)
-#define OMAP4_CM_L4PER_ELM_CLKCTRL_OFFSET		0x0058
-#define OMAP4430_CM_L4PER_ELM_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0058)
-#define OMAP4_CM_L4PER_GPIO2_CLKCTRL_OFFSET		0x0060
-#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0060)
-#define OMAP4_CM_L4PER_GPIO3_CLKCTRL_OFFSET		0x0068
-#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0068)
-#define OMAP4_CM_L4PER_GPIO4_CLKCTRL_OFFSET		0x0070
-#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0070)
-#define OMAP4_CM_L4PER_GPIO5_CLKCTRL_OFFSET		0x0078
-#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0078)
-#define OMAP4_CM_L4PER_GPIO6_CLKCTRL_OFFSET		0x0080
-#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0080)
-#define OMAP4_CM_L4PER_HDQ1W_CLKCTRL_OFFSET		0x0088
-#define OMAP4430_CM_L4PER_HDQ1W_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0088)
-#define OMAP4_CM_L4PER_HECC1_CLKCTRL_OFFSET		0x0090
-#define OMAP4430_CM_L4PER_HECC1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0090)
-#define OMAP4_CM_L4PER_HECC2_CLKCTRL_OFFSET		0x0098
-#define OMAP4430_CM_L4PER_HECC2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0098)
-#define OMAP4_CM_L4PER_I2C1_CLKCTRL_OFFSET		0x00a0
-#define OMAP4430_CM_L4PER_I2C1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00a0)
-#define OMAP4_CM_L4PER_I2C2_CLKCTRL_OFFSET		0x00a8
-#define OMAP4430_CM_L4PER_I2C2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00a8)
-#define OMAP4_CM_L4PER_I2C3_CLKCTRL_OFFSET		0x00b0
-#define OMAP4430_CM_L4PER_I2C3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00b0)
-#define OMAP4_CM_L4PER_I2C4_CLKCTRL_OFFSET		0x00b8
-#define OMAP4430_CM_L4PER_I2C4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00b8)
-#define OMAP4_CM_L4PER_L4PER_CLKCTRL_OFFSET		0x00c0
-#define OMAP4430_CM_L4PER_L4PER_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00c0)
-#define OMAP4_CM_L4PER_MCASP2_CLKCTRL_OFFSET		0x00d0
-#define OMAP4430_CM_L4PER_MCASP2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00d0)
-#define OMAP4_CM_L4PER_MCASP3_CLKCTRL_OFFSET		0x00d8
-#define OMAP4430_CM_L4PER_MCASP3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00d8)
-#define OMAP4_CM_L4PER_MCBSP4_CLKCTRL_OFFSET		0x00e0
-#define OMAP4430_CM_L4PER_MCBSP4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00e0)
-#define OMAP4_CM_L4PER_MGATE_CLKCTRL_OFFSET		0x00e8
-#define OMAP4430_CM_L4PER_MGATE_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00e8)
-#define OMAP4_CM_L4PER_MCSPI1_CLKCTRL_OFFSET		0x00f0
-#define OMAP4430_CM_L4PER_MCSPI1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00f0)
-#define OMAP4_CM_L4PER_MCSPI2_CLKCTRL_OFFSET		0x00f8
-#define OMAP4430_CM_L4PER_MCSPI2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00f8)
-#define OMAP4_CM_L4PER_MCSPI3_CLKCTRL_OFFSET		0x0100
-#define OMAP4430_CM_L4PER_MCSPI3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0100)
-#define OMAP4_CM_L4PER_MCSPI4_CLKCTRL_OFFSET		0x0108
-#define OMAP4430_CM_L4PER_MCSPI4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0108)
-#define OMAP4_CM_L4PER_MMCSD3_CLKCTRL_OFFSET		0x0120
-#define OMAP4430_CM_L4PER_MMCSD3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0120)
-#define OMAP4_CM_L4PER_MMCSD4_CLKCTRL_OFFSET		0x0128
-#define OMAP4430_CM_L4PER_MMCSD4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0128)
-#define OMAP4_CM_L4PER_MSPROHG_CLKCTRL_OFFSET		0x0130
-#define OMAP4430_CM_L4PER_MSPROHG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0130)
-#define OMAP4_CM_L4PER_SLIMBUS2_CLKCTRL_OFFSET		0x0138
-#define OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0138)
-#define OMAP4_CM_L4PER_UART1_CLKCTRL_OFFSET		0x0140
-#define OMAP4430_CM_L4PER_UART1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0140)
-#define OMAP4_CM_L4PER_UART2_CLKCTRL_OFFSET		0x0148
-#define OMAP4430_CM_L4PER_UART2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0148)
-#define OMAP4_CM_L4PER_UART3_CLKCTRL_OFFSET		0x0150
-#define OMAP4430_CM_L4PER_UART3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0150)
-#define OMAP4_CM_L4PER_UART4_CLKCTRL_OFFSET		0x0158
-#define OMAP4430_CM_L4PER_UART4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0158)
-#define OMAP4_CM_L4PER_MMCSD5_CLKCTRL_OFFSET		0x0160
-#define OMAP4430_CM_L4PER_MMCSD5_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0160)
-#define OMAP4_CM_L4PER_I2C5_CLKCTRL_OFFSET		0x0168
-#define OMAP4430_CM_L4PER_I2C5_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0168)
-#define OMAP4_CM_L4SEC_CLKSTCTRL_OFFSET			0x0180
-#define OMAP4430_CM_L4SEC_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0180)
-#define OMAP4_CM_L4SEC_STATICDEP_OFFSET			0x0184
-#define OMAP4430_CM_L4SEC_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0184)
-#define OMAP4_CM_L4SEC_DYNAMICDEP_OFFSET		0x0188
-#define OMAP4430_CM_L4SEC_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0188)
-#define OMAP4_CM_L4SEC_AES1_CLKCTRL_OFFSET		0x01a0
-#define OMAP4430_CM_L4SEC_AES1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01a0)
-#define OMAP4_CM_L4SEC_AES2_CLKCTRL_OFFSET		0x01a8
-#define OMAP4430_CM_L4SEC_AES2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01a8)
-#define OMAP4_CM_L4SEC_DES3DES_CLKCTRL_OFFSET		0x01b0
-#define OMAP4430_CM_L4SEC_DES3DES_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01b0)
-#define OMAP4_CM_L4SEC_PKAEIP29_CLKCTRL_OFFSET		0x01b8
-#define OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01b8)
-#define OMAP4_CM_L4SEC_RNG_CLKCTRL_OFFSET		0x01c0
-#define OMAP4430_CM_L4SEC_RNG_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01c0)
-#define OMAP4_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET		0x01c8
-#define OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01c8)
-#define OMAP4_CM_L4SEC_CRYPTODMA_CLKCTRL_OFFSET		0x01d8
-#define OMAP4430_CM_L4SEC_CRYPTODMA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01d8)
-
-/* CM2.CEFUSE_CM2 register offsets */
-#define OMAP4_CM_CEFUSE_CLKSTCTRL_OFFSET		0x0000
-#define OMAP4430_CM_CEFUSE_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_INST, 0x0000)
-#define OMAP4_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_INST, 0x0020)
-
 #endif
diff --git a/arch/arm/mach-omap2/cm2_54xx.h b/arch/arm/mach-omap2/cm2_54xx.h
index 8e49765cd441..7e5860578ae3 100644
--- a/arch/arm/mach-omap2/cm2_54xx.h
+++ b/arch/arm/mach-omap2/cm2_54xx.h
@@ -35,8 +35,6 @@
 #define OMAP54XX_CM_CORE_GPU_INST		0x1500
 #define OMAP54XX_CM_CORE_L3INIT_INST		0x1600
 #define OMAP54XX_CM_CORE_CUSTEFUSE_INST		0x1700
-#define OMAP54XX_CM_CORE_RESTORE_INST		0x1e00
-#define OMAP54XX_CM_CORE_INSTR_INST		0x1f00
 
 /* CM_CORE clockdomain register offsets (from instance start) */
 #define OMAP54XX_CM_CORE_COREAON_COREAON_CDOFFS		0x0000
@@ -58,327 +56,4 @@
 #define OMAP54XX_CM_CORE_L3INIT_L3INIT_CDOFFS		0x0000
 #define OMAP54XX_CM_CORE_CUSTEFUSE_CUSTEFUSE_CDOFFS	0x0000
 
-/* CM_CORE */
-
-/* CM_CORE.OCP_SOCKET_CM_CORE register offsets */
-#define OMAP54XX_REVISION_CM_CORE_OFFSET			0x0000
-#define OMAP54XX_CM_CM_CORE_PROFILING_CLKCTRL_OFFSET		0x0040
-#define OMAP54XX_CM_CM_CORE_PROFILING_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_OCP_SOCKET_INST, 0x0040)
-#define OMAP54XX_CM_CORE_DEBUG_CFG_OFFSET			0x0080
-#define OMAP54XX_CM_CORE_DEBUG_OUT_OFFSET			0x0084
-
-/* CM_CORE.CKGEN_CM_CORE register offsets */
-#define OMAP54XX_CM_CLKSEL_USB_60MHZ_OFFSET			0x0004
-#define OMAP54XX_CM_CLKSEL_USB_60MHZ				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0004)
-#define OMAP54XX_CM_CLKMODE_DPLL_PER_OFFSET			0x0040
-#define OMAP54XX_CM_CLKMODE_DPLL_PER				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0040)
-#define OMAP54XX_CM_IDLEST_DPLL_PER_OFFSET			0x0044
-#define OMAP54XX_CM_IDLEST_DPLL_PER				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0044)
-#define OMAP54XX_CM_AUTOIDLE_DPLL_PER_OFFSET			0x0048
-#define OMAP54XX_CM_AUTOIDLE_DPLL_PER				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0048)
-#define OMAP54XX_CM_CLKSEL_DPLL_PER_OFFSET			0x004c
-#define OMAP54XX_CM_CLKSEL_DPLL_PER				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x004c)
-#define OMAP54XX_CM_DIV_M2_DPLL_PER_OFFSET			0x0050
-#define OMAP54XX_CM_DIV_M2_DPLL_PER				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0050)
-#define OMAP54XX_CM_DIV_M3_DPLL_PER_OFFSET			0x0054
-#define OMAP54XX_CM_DIV_M3_DPLL_PER				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0054)
-#define OMAP54XX_CM_DIV_H11_DPLL_PER_OFFSET			0x0058
-#define OMAP54XX_CM_DIV_H11_DPLL_PER				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0058)
-#define OMAP54XX_CM_DIV_H12_DPLL_PER_OFFSET			0x005c
-#define OMAP54XX_CM_DIV_H12_DPLL_PER				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x005c)
-#define OMAP54XX_CM_DIV_H13_DPLL_PER_OFFSET			0x0060
-#define OMAP54XX_CM_DIV_H13_DPLL_PER				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0060)
-#define OMAP54XX_CM_DIV_H14_DPLL_PER_OFFSET			0x0064
-#define OMAP54XX_CM_DIV_H14_DPLL_PER				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0064)
-#define OMAP54XX_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET		0x0068
-#define OMAP54XX_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET		0x006c
-#define OMAP54XX_CM_CLKMODE_DPLL_USB_OFFSET			0x0080
-#define OMAP54XX_CM_CLKMODE_DPLL_USB				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0080)
-#define OMAP54XX_CM_IDLEST_DPLL_USB_OFFSET			0x0084
-#define OMAP54XX_CM_IDLEST_DPLL_USB				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0084)
-#define OMAP54XX_CM_AUTOIDLE_DPLL_USB_OFFSET			0x0088
-#define OMAP54XX_CM_AUTOIDLE_DPLL_USB				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0088)
-#define OMAP54XX_CM_CLKSEL_DPLL_USB_OFFSET			0x008c
-#define OMAP54XX_CM_CLKSEL_DPLL_USB				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x008c)
-#define OMAP54XX_CM_DIV_M2_DPLL_USB_OFFSET			0x0090
-#define OMAP54XX_CM_DIV_M2_DPLL_USB				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0090)
-#define OMAP54XX_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET		0x00a8
-#define OMAP54XX_CM_SSC_MODFREQDIV_DPLL_USB_OFFSET		0x00ac
-#define OMAP54XX_CM_CLKDCOLDO_DPLL_USB_OFFSET			0x00b4
-#define OMAP54XX_CM_CLKDCOLDO_DPLL_USB				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x00b4)
-#define OMAP54XX_CM_CLKMODE_DPLL_UNIPRO2_OFFSET			0x00c0
-#define OMAP54XX_CM_CLKMODE_DPLL_UNIPRO2			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x00c0)
-#define OMAP54XX_CM_IDLEST_DPLL_UNIPRO2_OFFSET			0x00c4
-#define OMAP54XX_CM_IDLEST_DPLL_UNIPRO2				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x00c4)
-#define OMAP54XX_CM_AUTOIDLE_DPLL_UNIPRO2_OFFSET		0x00c8
-#define OMAP54XX_CM_AUTOIDLE_DPLL_UNIPRO2			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x00c8)
-#define OMAP54XX_CM_CLKSEL_DPLL_UNIPRO2_OFFSET			0x00cc
-#define OMAP54XX_CM_CLKSEL_DPLL_UNIPRO2				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x00cc)
-#define OMAP54XX_CM_DIV_M2_DPLL_UNIPRO2_OFFSET			0x00d0
-#define OMAP54XX_CM_DIV_M2_DPLL_UNIPRO2				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x00d0)
-#define OMAP54XX_CM_SSC_DELTAMSTEP_DPLL_UNIPRO2_OFFSET		0x00e8
-#define OMAP54XX_CM_SSC_MODFREQDIV_DPLL_UNIPRO2_OFFSET		0x00ec
-#define OMAP54XX_CM_CLKDCOLDO_DPLL_UNIPRO2_OFFSET		0x00f4
-#define OMAP54XX_CM_CLKDCOLDO_DPLL_UNIPRO2			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x00f4)
-#define OMAP54XX_CM_CLKMODE_DPLL_UNIPRO1_OFFSET			0x0100
-#define OMAP54XX_CM_CLKMODE_DPLL_UNIPRO1			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0100)
-#define OMAP54XX_CM_IDLEST_DPLL_UNIPRO1_OFFSET			0x0104
-#define OMAP54XX_CM_IDLEST_DPLL_UNIPRO1				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0104)
-#define OMAP54XX_CM_AUTOIDLE_DPLL_UNIPRO1_OFFSET		0x0108
-#define OMAP54XX_CM_AUTOIDLE_DPLL_UNIPRO1			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0108)
-#define OMAP54XX_CM_CLKSEL_DPLL_UNIPRO1_OFFSET			0x010c
-#define OMAP54XX_CM_CLKSEL_DPLL_UNIPRO1				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x010c)
-#define OMAP54XX_CM_DIV_M2_DPLL_UNIPRO1_OFFSET			0x0110
-#define OMAP54XX_CM_DIV_M2_DPLL_UNIPRO1				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0110)
-#define OMAP54XX_CM_SSC_DELTAMSTEP_DPLL_UNIPRO1_OFFSET		0x0128
-#define OMAP54XX_CM_SSC_MODFREQDIV_DPLL_UNIPRO1_OFFSET		0x012c
-#define OMAP54XX_CM_CLKDCOLDO_DPLL_UNIPRO1_OFFSET		0x0134
-#define OMAP54XX_CM_CLKDCOLDO_DPLL_UNIPRO1			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CKGEN_INST, 0x0134)
-
-/* CM_CORE.COREAON_CM_CORE register offsets */
-#define OMAP54XX_CM_COREAON_CLKSTCTRL_OFFSET			0x0000
-#define OMAP54XX_CM_COREAON_SMARTREFLEX_MPU_CLKCTRL_OFFSET	0x0028
-#define OMAP54XX_CM_COREAON_SMARTREFLEX_MPU_CLKCTRL		OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_COREAON_INST, 0x0028)
-#define OMAP54XX_CM_COREAON_SMARTREFLEX_MM_CLKCTRL_OFFSET	0x0030
-#define OMAP54XX_CM_COREAON_SMARTREFLEX_MM_CLKCTRL		OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_COREAON_INST, 0x0030)
-#define OMAP54XX_CM_COREAON_SMARTREFLEX_CORE_CLKCTRL_OFFSET	0x0038
-#define OMAP54XX_CM_COREAON_SMARTREFLEX_CORE_CLKCTRL		OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_COREAON_INST, 0x0038)
-#define OMAP54XX_CM_COREAON_USB_PHY_CORE_CLKCTRL_OFFSET		0x0040
-#define OMAP54XX_CM_COREAON_USB_PHY_CORE_CLKCTRL		OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_COREAON_INST, 0x0040)
-#define OMAP54XX_CM_COREAON_IO_SRCOMP_CLKCTRL_OFFSET		0x0050
-#define OMAP54XX_CM_COREAON_IO_SRCOMP_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_COREAON_INST, 0x0050)
-
-/* CM_CORE.CORE_CM_CORE register offsets */
-#define OMAP54XX_CM_L3MAIN1_CLKSTCTRL_OFFSET			0x0000
-#define OMAP54XX_CM_L3MAIN1_DYNAMICDEP_OFFSET			0x0008
-#define OMAP54XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET		0x0020
-#define OMAP54XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0020)
-#define OMAP54XX_CM_L3MAIN2_CLKSTCTRL_OFFSET			0x0100
-#define OMAP54XX_CM_L3MAIN2_DYNAMICDEP_OFFSET			0x0108
-#define OMAP54XX_CM_L3MAIN2_L3_MAIN_2_CLKCTRL_OFFSET		0x0120
-#define OMAP54XX_CM_L3MAIN2_L3_MAIN_2_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0120)
-#define OMAP54XX_CM_L3MAIN2_GPMC_CLKCTRL_OFFSET			0x0128
-#define OMAP54XX_CM_L3MAIN2_GPMC_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0128)
-#define OMAP54XX_CM_L3MAIN2_OCMC_RAM_CLKCTRL_OFFSET		0x0130
-#define OMAP54XX_CM_L3MAIN2_OCMC_RAM_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0130)
-#define OMAP54XX_CM_IPU_CLKSTCTRL_OFFSET			0x0200
-#define OMAP54XX_CM_IPU_STATICDEP_OFFSET			0x0204
-#define OMAP54XX_CM_IPU_DYNAMICDEP_OFFSET			0x0208
-#define OMAP54XX_CM_IPU_IPU_CLKCTRL_OFFSET			0x0220
-#define OMAP54XX_CM_IPU_IPU_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0220)
-#define OMAP54XX_CM_DMA_CLKSTCTRL_OFFSET			0x0300
-#define OMAP54XX_CM_DMA_STATICDEP_OFFSET			0x0304
-#define OMAP54XX_CM_DMA_DYNAMICDEP_OFFSET			0x0308
-#define OMAP54XX_CM_DMA_DMA_SYSTEM_CLKCTRL_OFFSET		0x0320
-#define OMAP54XX_CM_DMA_DMA_SYSTEM_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0320)
-#define OMAP54XX_CM_EMIF_CLKSTCTRL_OFFSET			0x0400
-#define OMAP54XX_CM_EMIF_DMM_CLKCTRL_OFFSET			0x0420
-#define OMAP54XX_CM_EMIF_DMM_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0420)
-#define OMAP54XX_CM_EMIF_EMIF_OCP_FW_CLKCTRL_OFFSET		0x0428
-#define OMAP54XX_CM_EMIF_EMIF_OCP_FW_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0428)
-#define OMAP54XX_CM_EMIF_EMIF1_CLKCTRL_OFFSET			0x0430
-#define OMAP54XX_CM_EMIF_EMIF1_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0430)
-#define OMAP54XX_CM_EMIF_EMIF2_CLKCTRL_OFFSET			0x0438
-#define OMAP54XX_CM_EMIF_EMIF2_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0438)
-#define OMAP54XX_CM_EMIF_EMIF_DLL_CLKCTRL_OFFSET		0x0440
-#define OMAP54XX_CM_EMIF_EMIF_DLL_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0440)
-#define OMAP54XX_CM_C2C_CLKSTCTRL_OFFSET			0x0500
-#define OMAP54XX_CM_C2C_STATICDEP_OFFSET			0x0504
-#define OMAP54XX_CM_C2C_DYNAMICDEP_OFFSET			0x0508
-#define OMAP54XX_CM_C2C_C2C_CLKCTRL_OFFSET			0x0520
-#define OMAP54XX_CM_C2C_C2C_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0520)
-#define OMAP54XX_CM_C2C_MODEM_ICR_CLKCTRL_OFFSET		0x0528
-#define OMAP54XX_CM_C2C_MODEM_ICR_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0528)
-#define OMAP54XX_CM_C2C_C2C_OCP_FW_CLKCTRL_OFFSET		0x0530
-#define OMAP54XX_CM_C2C_C2C_OCP_FW_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0530)
-#define OMAP54XX_CM_L4CFG_CLKSTCTRL_OFFSET			0x0600
-#define OMAP54XX_CM_L4CFG_DYNAMICDEP_OFFSET			0x0608
-#define OMAP54XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET			0x0620
-#define OMAP54XX_CM_L4CFG_L4_CFG_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0620)
-#define OMAP54XX_CM_L4CFG_SPINLOCK_CLKCTRL_OFFSET		0x0628
-#define OMAP54XX_CM_L4CFG_SPINLOCK_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0628)
-#define OMAP54XX_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET		0x0630
-#define OMAP54XX_CM_L4CFG_MAILBOX_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0630)
-#define OMAP54XX_CM_L4CFG_SAR_ROM_CLKCTRL_OFFSET		0x0638
-#define OMAP54XX_CM_L4CFG_SAR_ROM_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0638)
-#define OMAP54XX_CM_L4CFG_OCP2SCP2_CLKCTRL_OFFSET		0x0640
-#define OMAP54XX_CM_L4CFG_OCP2SCP2_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0640)
-#define OMAP54XX_CM_L3INSTR_CLKSTCTRL_OFFSET			0x0700
-#define OMAP54XX_CM_L3INSTR_L3_MAIN_3_CLKCTRL_OFFSET		0x0720
-#define OMAP54XX_CM_L3INSTR_L3_MAIN_3_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0720)
-#define OMAP54XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET		0x0728
-#define OMAP54XX_CM_L3INSTR_L3_INSTR_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0728)
-#define OMAP54XX_CM_L3INSTR_OCP_WP_NOC_CLKCTRL_OFFSET		0x0740
-#define OMAP54XX_CM_L3INSTR_OCP_WP_NOC_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0740)
-#define OMAP54XX_CM_L3INSTR_DLL_AGING_CLKCTRL_OFFSET		0x0748
-#define OMAP54XX_CM_L3INSTR_DLL_AGING_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0748)
-#define OMAP54XX_CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL_OFFSET	0x0750
-#define OMAP54XX_CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL		OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0750)
-#define OMAP54XX_CM_MIPIEXT_CLKSTCTRL_OFFSET			0x0800
-#define OMAP54XX_CM_MIPIEXT_STATICDEP_OFFSET			0x0804
-#define OMAP54XX_CM_MIPIEXT_DYNAMICDEP_OFFSET			0x0808
-#define OMAP54XX_CM_MIPIEXT_LLI_CLKCTRL_OFFSET			0x0820
-#define OMAP54XX_CM_MIPIEXT_LLI_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0820)
-#define OMAP54XX_CM_MIPIEXT_LLI_OCP_FW_CLKCTRL_OFFSET		0x0828
-#define OMAP54XX_CM_MIPIEXT_LLI_OCP_FW_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0828)
-#define OMAP54XX_CM_MIPIEXT_MPHY_CLKCTRL_OFFSET			0x0830
-#define OMAP54XX_CM_MIPIEXT_MPHY_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0830)
-#define OMAP54XX_CM_L4PER_CLKSTCTRL_OFFSET			0x0900
-#define OMAP54XX_CM_L4PER_DYNAMICDEP_OFFSET			0x0908
-#define OMAP54XX_CM_L4PER_TIMER10_CLKCTRL_OFFSET		0x0928
-#define OMAP54XX_CM_L4PER_TIMER10_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0928)
-#define OMAP54XX_CM_L4PER_TIMER11_CLKCTRL_OFFSET		0x0930
-#define OMAP54XX_CM_L4PER_TIMER11_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0930)
-#define OMAP54XX_CM_L4PER_TIMER2_CLKCTRL_OFFSET			0x0938
-#define OMAP54XX_CM_L4PER_TIMER2_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0938)
-#define OMAP54XX_CM_L4PER_TIMER3_CLKCTRL_OFFSET			0x0940
-#define OMAP54XX_CM_L4PER_TIMER3_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0940)
-#define OMAP54XX_CM_L4PER_TIMER4_CLKCTRL_OFFSET			0x0948
-#define OMAP54XX_CM_L4PER_TIMER4_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0948)
-#define OMAP54XX_CM_L4PER_TIMER9_CLKCTRL_OFFSET			0x0950
-#define OMAP54XX_CM_L4PER_TIMER9_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0950)
-#define OMAP54XX_CM_L4PER_ELM_CLKCTRL_OFFSET			0x0958
-#define OMAP54XX_CM_L4PER_ELM_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0958)
-#define OMAP54XX_CM_L4PER_GPIO2_CLKCTRL_OFFSET			0x0960
-#define OMAP54XX_CM_L4PER_GPIO2_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0960)
-#define OMAP54XX_CM_L4PER_GPIO3_CLKCTRL_OFFSET			0x0968
-#define OMAP54XX_CM_L4PER_GPIO3_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0968)
-#define OMAP54XX_CM_L4PER_GPIO4_CLKCTRL_OFFSET			0x0970
-#define OMAP54XX_CM_L4PER_GPIO4_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0970)
-#define OMAP54XX_CM_L4PER_GPIO5_CLKCTRL_OFFSET			0x0978
-#define OMAP54XX_CM_L4PER_GPIO5_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0978)
-#define OMAP54XX_CM_L4PER_GPIO6_CLKCTRL_OFFSET			0x0980
-#define OMAP54XX_CM_L4PER_GPIO6_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0980)
-#define OMAP54XX_CM_L4PER_HDQ1W_CLKCTRL_OFFSET			0x0988
-#define OMAP54XX_CM_L4PER_HDQ1W_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0988)
-#define OMAP54XX_CM_L4PER_I2C1_CLKCTRL_OFFSET			0x09a0
-#define OMAP54XX_CM_L4PER_I2C1_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x09a0)
-#define OMAP54XX_CM_L4PER_I2C2_CLKCTRL_OFFSET			0x09a8
-#define OMAP54XX_CM_L4PER_I2C2_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x09a8)
-#define OMAP54XX_CM_L4PER_I2C3_CLKCTRL_OFFSET			0x09b0
-#define OMAP54XX_CM_L4PER_I2C3_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x09b0)
-#define OMAP54XX_CM_L4PER_I2C4_CLKCTRL_OFFSET			0x09b8
-#define OMAP54XX_CM_L4PER_I2C4_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x09b8)
-#define OMAP54XX_CM_L4PER_L4_PER_CLKCTRL_OFFSET			0x09c0
-#define OMAP54XX_CM_L4PER_L4_PER_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x09c0)
-#define OMAP54XX_CM_L4PER_MCSPI1_CLKCTRL_OFFSET			0x09f0
-#define OMAP54XX_CM_L4PER_MCSPI1_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x09f0)
-#define OMAP54XX_CM_L4PER_MCSPI2_CLKCTRL_OFFSET			0x09f8
-#define OMAP54XX_CM_L4PER_MCSPI2_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x09f8)
-#define OMAP54XX_CM_L4PER_MCSPI3_CLKCTRL_OFFSET			0x0a00
-#define OMAP54XX_CM_L4PER_MCSPI3_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a00)
-#define OMAP54XX_CM_L4PER_MCSPI4_CLKCTRL_OFFSET			0x0a08
-#define OMAP54XX_CM_L4PER_MCSPI4_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a08)
-#define OMAP54XX_CM_L4PER_GPIO7_CLKCTRL_OFFSET			0x0a10
-#define OMAP54XX_CM_L4PER_GPIO7_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a10)
-#define OMAP54XX_CM_L4PER_GPIO8_CLKCTRL_OFFSET			0x0a18
-#define OMAP54XX_CM_L4PER_GPIO8_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a18)
-#define OMAP54XX_CM_L4PER_MMC3_CLKCTRL_OFFSET			0x0a20
-#define OMAP54XX_CM_L4PER_MMC3_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a20)
-#define OMAP54XX_CM_L4PER_MMC4_CLKCTRL_OFFSET			0x0a28
-#define OMAP54XX_CM_L4PER_MMC4_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a28)
-#define OMAP54XX_CM_L4PER_UART1_CLKCTRL_OFFSET			0x0a40
-#define OMAP54XX_CM_L4PER_UART1_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a40)
-#define OMAP54XX_CM_L4PER_UART2_CLKCTRL_OFFSET			0x0a48
-#define OMAP54XX_CM_L4PER_UART2_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a48)
-#define OMAP54XX_CM_L4PER_UART3_CLKCTRL_OFFSET			0x0a50
-#define OMAP54XX_CM_L4PER_UART3_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a50)
-#define OMAP54XX_CM_L4PER_UART4_CLKCTRL_OFFSET			0x0a58
-#define OMAP54XX_CM_L4PER_UART4_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a58)
-#define OMAP54XX_CM_L4PER_MMC5_CLKCTRL_OFFSET			0x0a60
-#define OMAP54XX_CM_L4PER_MMC5_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a60)
-#define OMAP54XX_CM_L4PER_I2C5_CLKCTRL_OFFSET			0x0a68
-#define OMAP54XX_CM_L4PER_I2C5_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a68)
-#define OMAP54XX_CM_L4PER_UART5_CLKCTRL_OFFSET			0x0a70
-#define OMAP54XX_CM_L4PER_UART5_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a70)
-#define OMAP54XX_CM_L4PER_UART6_CLKCTRL_OFFSET			0x0a78
-#define OMAP54XX_CM_L4PER_UART6_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0a78)
-#define OMAP54XX_CM_L4SEC_CLKSTCTRL_OFFSET			0x0a80
-#define OMAP54XX_CM_L4SEC_STATICDEP_OFFSET			0x0a84
-#define OMAP54XX_CM_L4SEC_DYNAMICDEP_OFFSET			0x0a88
-#define OMAP54XX_CM_L4SEC_AES1_CLKCTRL_OFFSET			0x0aa0
-#define OMAP54XX_CM_L4SEC_AES1_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0aa0)
-#define OMAP54XX_CM_L4SEC_AES2_CLKCTRL_OFFSET			0x0aa8
-#define OMAP54XX_CM_L4SEC_AES2_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0aa8)
-#define OMAP54XX_CM_L4SEC_DES3DES_CLKCTRL_OFFSET		0x0ab0
-#define OMAP54XX_CM_L4SEC_DES3DES_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0ab0)
-#define OMAP54XX_CM_L4SEC_FPKA_CLKCTRL_OFFSET			0x0ab8
-#define OMAP54XX_CM_L4SEC_FPKA_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0ab8)
-#define OMAP54XX_CM_L4SEC_RNG_CLKCTRL_OFFSET			0x0ac0
-#define OMAP54XX_CM_L4SEC_RNG_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0ac0)
-#define OMAP54XX_CM_L4SEC_SHA2MD5_CLKCTRL_OFFSET		0x0ac8
-#define OMAP54XX_CM_L4SEC_SHA2MD5_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0ac8)
-#define OMAP54XX_CM_L4SEC_DMA_CRYPTO_CLKCTRL_OFFSET		0x0ad8
-#define OMAP54XX_CM_L4SEC_DMA_CRYPTO_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CORE_INST, 0x0ad8)
-
-/* CM_CORE.IVA_CM_CORE register offsets */
-#define OMAP54XX_CM_IVA_CLKSTCTRL_OFFSET			0x0000
-#define OMAP54XX_CM_IVA_STATICDEP_OFFSET			0x0004
-#define OMAP54XX_CM_IVA_DYNAMICDEP_OFFSET			0x0008
-#define OMAP54XX_CM_IVA_IVA_CLKCTRL_OFFSET			0x0020
-#define OMAP54XX_CM_IVA_IVA_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_IVA_INST, 0x0020)
-#define OMAP54XX_CM_IVA_SL2_CLKCTRL_OFFSET			0x0028
-#define OMAP54XX_CM_IVA_SL2_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_IVA_INST, 0x0028)
-
-/* CM_CORE.CAM_CM_CORE register offsets */
-#define OMAP54XX_CM_CAM_CLKSTCTRL_OFFSET			0x0000
-#define OMAP54XX_CM_CAM_STATICDEP_OFFSET			0x0004
-#define OMAP54XX_CM_CAM_DYNAMICDEP_OFFSET			0x0008
-#define OMAP54XX_CM_CAM_ISS_CLKCTRL_OFFSET			0x0020
-#define OMAP54XX_CM_CAM_ISS_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CAM_INST, 0x0020)
-#define OMAP54XX_CM_CAM_FDIF_CLKCTRL_OFFSET			0x0028
-#define OMAP54XX_CM_CAM_FDIF_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CAM_INST, 0x0028)
-#define OMAP54XX_CM_CAM_CAL_CLKCTRL_OFFSET			0x0030
-#define OMAP54XX_CM_CAM_CAL_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CAM_INST, 0x0030)
-
-/* CM_CORE.DSS_CM_CORE register offsets */
-#define OMAP54XX_CM_DSS_CLKSTCTRL_OFFSET			0x0000
-#define OMAP54XX_CM_DSS_STATICDEP_OFFSET			0x0004
-#define OMAP54XX_CM_DSS_DYNAMICDEP_OFFSET			0x0008
-#define OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET			0x0020
-#define OMAP54XX_CM_DSS_DSS_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_DSS_INST, 0x0020)
-#define OMAP54XX_CM_DSS_BB2D_CLKCTRL_OFFSET			0x0030
-#define OMAP54XX_CM_DSS_BB2D_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_DSS_INST, 0x0030)
-
-/* CM_CORE.GPU_CM_CORE register offsets */
-#define OMAP54XX_CM_GPU_CLKSTCTRL_OFFSET			0x0000
-#define OMAP54XX_CM_GPU_STATICDEP_OFFSET			0x0004
-#define OMAP54XX_CM_GPU_DYNAMICDEP_OFFSET			0x0008
-#define OMAP54XX_CM_GPU_GPU_CLKCTRL_OFFSET			0x0020
-#define OMAP54XX_CM_GPU_GPU_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_GPU_INST, 0x0020)
-
-/* CM_CORE.L3INIT_CM_CORE register offsets */
-#define OMAP54XX_CM_L3INIT_CLKSTCTRL_OFFSET			0x0000
-#define OMAP54XX_CM_L3INIT_STATICDEP_OFFSET			0x0004
-#define OMAP54XX_CM_L3INIT_DYNAMICDEP_OFFSET			0x0008
-#define OMAP54XX_CM_L3INIT_MMC1_CLKCTRL_OFFSET			0x0028
-#define OMAP54XX_CM_L3INIT_MMC1_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0028)
-#define OMAP54XX_CM_L3INIT_MMC2_CLKCTRL_OFFSET			0x0030
-#define OMAP54XX_CM_L3INIT_MMC2_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0030)
-#define OMAP54XX_CM_L3INIT_HSI_CLKCTRL_OFFSET			0x0038
-#define OMAP54XX_CM_L3INIT_HSI_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0038)
-#define OMAP54XX_CM_L3INIT_UNIPRO2_CLKCTRL_OFFSET		0x0040
-#define OMAP54XX_CM_L3INIT_UNIPRO2_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0040)
-#define OMAP54XX_CM_L3INIT_MPHY_UNIPRO2_CLKCTRL_OFFSET		0x0048
-#define OMAP54XX_CM_L3INIT_MPHY_UNIPRO2_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0048)
-#define OMAP54XX_CM_L3INIT_USB_HOST_HS_CLKCTRL_OFFSET		0x0058
-#define OMAP54XX_CM_L3INIT_USB_HOST_HS_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0058)
-#define OMAP54XX_CM_L3INIT_USB_TLL_HS_CLKCTRL_OFFSET		0x0068
-#define OMAP54XX_CM_L3INIT_USB_TLL_HS_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0068)
-#define OMAP54XX_CM_L3INIT_IEEE1500_2_OCP_CLKCTRL_OFFSET	0x0078
-#define OMAP54XX_CM_L3INIT_IEEE1500_2_OCP_CLKCTRL		OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0078)
-#define OMAP54XX_CM_L3INIT_SATA_CLKCTRL_OFFSET			0x0088
-#define OMAP54XX_CM_L3INIT_SATA_CLKCTRL				OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x0088)
-#define OMAP54XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET		0x00e0
-#define OMAP54XX_CM_L3INIT_OCP2SCP1_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x00e0)
-#define OMAP54XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET		0x00e8
-#define OMAP54XX_CM_L3INIT_OCP2SCP3_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x00e8)
-#define OMAP54XX_CM_L3INIT_USB_OTG_SS_CLKCTRL_OFFSET		0x00f0
-#define OMAP54XX_CM_L3INIT_USB_OTG_SS_CLKCTRL			OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_L3INIT_INST, 0x00f0)
-
-/* CM_CORE.CUSTEFUSE_CM_CORE register offsets */
-#define OMAP54XX_CM_CUSTEFUSE_CLKSTCTRL_OFFSET			0x0000
-#define OMAP54XX_CM_CUSTEFUSE_EFUSE_CTRL_CUST_CLKCTRL_OFFSET	0x0020
-#define OMAP54XX_CM_CUSTEFUSE_EFUSE_CTRL_CUST_CLKCTRL		OMAP54XX_CM_CORE_REGADDR(OMAP54XX_CM_CORE_CUSTEFUSE_INST, 0x0020)
-
 #endif
diff --git a/arch/arm/mach-omap2/cm2_7xx.h b/arch/arm/mach-omap2/cm2_7xx.h
index f8734605b1e1..af63b4b877b2 100644
--- a/arch/arm/mach-omap2/cm2_7xx.h
+++ b/arch/arm/mach-omap2/cm2_7xx.h
@@ -37,7 +37,6 @@
 #define DRA7XX_CM_CORE_L3INIT_INST	0x1300
 #define DRA7XX_CM_CORE_CUSTEFUSE_INST	0x1600
 #define DRA7XX_CM_CORE_L4PER_INST	0x1700
-#define DRA7XX_CM_CORE_RESTORE_INST	0x1e18
 
 /* CM_CORE clockdomain register offsets (from instance start) */
 #define DRA7XX_CM_CORE_COREAON_COREAON_CDOFFS		0x0000
@@ -61,452 +60,4 @@
 #define DRA7XX_CM_CORE_L4PER_L4PER2_CDOFFS		0x01fc
 #define DRA7XX_CM_CORE_L4PER_L4PER3_CDOFFS		0x0210
 
-/* CM_CORE */
-
-/* CM_CORE.OCP_SOCKET_CM_CORE register offsets */
-#define DRA7XX_REVISION_CM_CORE_OFFSET				0x0000
-#define DRA7XX_CM_CM_CORE_PROFILING_CLKCTRL_OFFSET		0x0040
-#define DRA7XX_CM_CM_CORE_PROFILING_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_OCP_SOCKET_INST, 0x0040)
-#define DRA7XX_CM_CORE_DEBUG_CFG_OFFSET				0x00f0
-
-/* CM_CORE.CKGEN_CM_CORE register offsets */
-#define DRA7XX_CM_CLKSEL_USB_60MHZ_OFFSET			0x0000
-#define DRA7XX_CM_CLKSEL_USB_60MHZ				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0000)
-#define DRA7XX_CM_CLKMODE_DPLL_PER_OFFSET			0x003c
-#define DRA7XX_CM_CLKMODE_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x003c)
-#define DRA7XX_CM_IDLEST_DPLL_PER_OFFSET			0x0040
-#define DRA7XX_CM_IDLEST_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0040)
-#define DRA7XX_CM_AUTOIDLE_DPLL_PER_OFFSET			0x0044
-#define DRA7XX_CM_AUTOIDLE_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0044)
-#define DRA7XX_CM_CLKSEL_DPLL_PER_OFFSET			0x0048
-#define DRA7XX_CM_CLKSEL_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0048)
-#define DRA7XX_CM_DIV_M2_DPLL_PER_OFFSET			0x004c
-#define DRA7XX_CM_DIV_M2_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x004c)
-#define DRA7XX_CM_DIV_M3_DPLL_PER_OFFSET			0x0050
-#define DRA7XX_CM_DIV_M3_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0050)
-#define DRA7XX_CM_DIV_H11_DPLL_PER_OFFSET			0x0054
-#define DRA7XX_CM_DIV_H11_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0054)
-#define DRA7XX_CM_DIV_H12_DPLL_PER_OFFSET			0x0058
-#define DRA7XX_CM_DIV_H12_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0058)
-#define DRA7XX_CM_DIV_H13_DPLL_PER_OFFSET			0x005c
-#define DRA7XX_CM_DIV_H13_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x005c)
-#define DRA7XX_CM_DIV_H14_DPLL_PER_OFFSET			0x0060
-#define DRA7XX_CM_DIV_H14_DPLL_PER				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0060)
-#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET		0x0064
-#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET		0x0068
-#define DRA7XX_CM_CLKMODE_DPLL_USB_OFFSET			0x007c
-#define DRA7XX_CM_CLKMODE_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x007c)
-#define DRA7XX_CM_IDLEST_DPLL_USB_OFFSET			0x0080
-#define DRA7XX_CM_IDLEST_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0080)
-#define DRA7XX_CM_AUTOIDLE_DPLL_USB_OFFSET			0x0084
-#define DRA7XX_CM_AUTOIDLE_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0084)
-#define DRA7XX_CM_CLKSEL_DPLL_USB_OFFSET			0x0088
-#define DRA7XX_CM_CLKSEL_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0088)
-#define DRA7XX_CM_DIV_M2_DPLL_USB_OFFSET			0x008c
-#define DRA7XX_CM_DIV_M2_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x008c)
-#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET		0x00a4
-#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_USB_OFFSET		0x00a8
-#define DRA7XX_CM_CLKDCOLDO_DPLL_USB_OFFSET			0x00b0
-#define DRA7XX_CM_CLKDCOLDO_DPLL_USB				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x00b0)
-#define DRA7XX_CM_CLKMODE_DPLL_PCIE_REF_OFFSET			0x00fc
-#define DRA7XX_CM_CLKMODE_DPLL_PCIE_REF				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x00fc)
-#define DRA7XX_CM_IDLEST_DPLL_PCIE_REF_OFFSET			0x0100
-#define DRA7XX_CM_IDLEST_DPLL_PCIE_REF				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0100)
-#define DRA7XX_CM_AUTOIDLE_DPLL_PCIE_REF_OFFSET			0x0104
-#define DRA7XX_CM_AUTOIDLE_DPLL_PCIE_REF			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0104)
-#define DRA7XX_CM_CLKSEL_DPLL_PCIE_REF_OFFSET			0x0108
-#define DRA7XX_CM_CLKSEL_DPLL_PCIE_REF				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0108)
-#define DRA7XX_CM_DIV_M2_DPLL_PCIE_REF_OFFSET			0x010c
-#define DRA7XX_CM_DIV_M2_DPLL_PCIE_REF				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x010c)
-#define DRA7XX_CM_SSC_DELTAMSTEP_DPLL_PCIE_REF_OFFSET		0x0110
-#define DRA7XX_CM_SSC_MODFREQDIV_DPLL_PCIE_REF_OFFSET		0x0114
-#define DRA7XX_CM_CLKMODE_APLL_PCIE_OFFSET			0x0118
-#define DRA7XX_CM_CLKMODE_APLL_PCIE				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0118)
-#define DRA7XX_CM_IDLEST_APLL_PCIE_OFFSET			0x011c
-#define DRA7XX_CM_IDLEST_APLL_PCIE				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x011c)
-#define DRA7XX_CM_DIV_M2_APLL_PCIE_OFFSET			0x0120
-#define DRA7XX_CM_DIV_M2_APLL_PCIE				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0120)
-#define DRA7XX_CM_CLKVCOLDO_APLL_PCIE_OFFSET			0x0124
-#define DRA7XX_CM_CLKVCOLDO_APLL_PCIE				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CKGEN_INST, 0x0124)
-
-/* CM_CORE.COREAON_CM_CORE register offsets */
-#define DRA7XX_CM_COREAON_CLKSTCTRL_OFFSET			0x0000
-#define DRA7XX_CM_COREAON_SMARTREFLEX_MPU_CLKCTRL_OFFSET	0x0028
-#define DRA7XX_CM_COREAON_SMARTREFLEX_MPU_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0028)
-#define DRA7XX_CM_COREAON_SMARTREFLEX_CORE_CLKCTRL_OFFSET	0x0038
-#define DRA7XX_CM_COREAON_SMARTREFLEX_CORE_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0038)
-#define DRA7XX_CM_COREAON_USB_PHY1_CORE_CLKCTRL_OFFSET		0x0040
-#define DRA7XX_CM_COREAON_USB_PHY1_CORE_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0040)
-#define DRA7XX_CM_COREAON_IO_SRCOMP_CLKCTRL_OFFSET		0x0050
-#define DRA7XX_CM_COREAON_IO_SRCOMP_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0050)
-#define DRA7XX_CM_COREAON_SMARTREFLEX_GPU_CLKCTRL_OFFSET	0x0058
-#define DRA7XX_CM_COREAON_SMARTREFLEX_GPU_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0058)
-#define DRA7XX_CM_COREAON_SMARTREFLEX_DSPEVE_CLKCTRL_OFFSET	0x0068
-#define DRA7XX_CM_COREAON_SMARTREFLEX_DSPEVE_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0068)
-#define DRA7XX_CM_COREAON_SMARTREFLEX_IVAHD_CLKCTRL_OFFSET	0x0078
-#define DRA7XX_CM_COREAON_SMARTREFLEX_IVAHD_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0078)
-#define DRA7XX_CM_COREAON_USB_PHY2_CORE_CLKCTRL_OFFSET		0x0088
-#define DRA7XX_CM_COREAON_USB_PHY2_CORE_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0088)
-#define DRA7XX_CM_COREAON_USB_PHY3_CORE_CLKCTRL_OFFSET		0x0098
-#define DRA7XX_CM_COREAON_USB_PHY3_CORE_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x0098)
-#define DRA7XX_CM_COREAON_DUMMY_MODULE1_CLKCTRL_OFFSET		0x00a0
-#define DRA7XX_CM_COREAON_DUMMY_MODULE1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x00a0)
-#define DRA7XX_CM_COREAON_DUMMY_MODULE2_CLKCTRL_OFFSET		0x00b0
-#define DRA7XX_CM_COREAON_DUMMY_MODULE2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x00b0)
-#define DRA7XX_CM_COREAON_DUMMY_MODULE3_CLKCTRL_OFFSET		0x00c0
-#define DRA7XX_CM_COREAON_DUMMY_MODULE3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x00c0)
-#define DRA7XX_CM_COREAON_DUMMY_MODULE4_CLKCTRL_OFFSET		0x00d0
-#define DRA7XX_CM_COREAON_DUMMY_MODULE4_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_COREAON_INST, 0x00d0)
-
-/* CM_CORE.CORE_CM_CORE register offsets */
-#define DRA7XX_CM_L3MAIN1_CLKSTCTRL_OFFSET			0x0000
-#define DRA7XX_CM_L3MAIN1_DYNAMICDEP_OFFSET			0x0008
-#define DRA7XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET		0x0020
-#define DRA7XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0020)
-#define DRA7XX_CM_L3MAIN1_GPMC_CLKCTRL_OFFSET			0x0028
-#define DRA7XX_CM_L3MAIN1_GPMC_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0028)
-#define DRA7XX_CM_L3MAIN1_MMU_EDMA_CLKCTRL_OFFSET		0x0030
-#define DRA7XX_CM_L3MAIN1_MMU_EDMA_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0030)
-#define DRA7XX_CM_L3MAIN1_OCMC_RAM1_CLKCTRL_OFFSET		0x0050
-#define DRA7XX_CM_L3MAIN1_OCMC_RAM1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0050)
-#define DRA7XX_CM_L3MAIN1_OCMC_RAM2_CLKCTRL_OFFSET		0x0058
-#define DRA7XX_CM_L3MAIN1_OCMC_RAM2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0058)
-#define DRA7XX_CM_L3MAIN1_OCMC_RAM3_CLKCTRL_OFFSET		0x0060
-#define DRA7XX_CM_L3MAIN1_OCMC_RAM3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0060)
-#define DRA7XX_CM_L3MAIN1_OCMC_ROM_CLKCTRL_OFFSET		0x0068
-#define DRA7XX_CM_L3MAIN1_OCMC_ROM_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0068)
-#define DRA7XX_CM_L3MAIN1_TPCC_CLKCTRL_OFFSET			0x0070
-#define DRA7XX_CM_L3MAIN1_TPCC_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0070)
-#define DRA7XX_CM_L3MAIN1_TPTC1_CLKCTRL_OFFSET			0x0078
-#define DRA7XX_CM_L3MAIN1_TPTC1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0078)
-#define DRA7XX_CM_L3MAIN1_TPTC2_CLKCTRL_OFFSET			0x0080
-#define DRA7XX_CM_L3MAIN1_TPTC2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0080)
-#define DRA7XX_CM_L3MAIN1_VCP1_CLKCTRL_OFFSET			0x0088
-#define DRA7XX_CM_L3MAIN1_VCP1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0088)
-#define DRA7XX_CM_L3MAIN1_VCP2_CLKCTRL_OFFSET			0x0090
-#define DRA7XX_CM_L3MAIN1_VCP2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0090)
-#define DRA7XX_CM_L3MAIN1_SPARE_CME_CLKCTRL_OFFSET		0x0098
-#define DRA7XX_CM_L3MAIN1_SPARE_CME_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0098)
-#define DRA7XX_CM_L3MAIN1_SPARE_HDMI_CLKCTRL_OFFSET		0x00a0
-#define DRA7XX_CM_L3MAIN1_SPARE_HDMI_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00a0)
-#define DRA7XX_CM_L3MAIN1_SPARE_ICM_CLKCTRL_OFFSET		0x00a8
-#define DRA7XX_CM_L3MAIN1_SPARE_ICM_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00a8)
-#define DRA7XX_CM_L3MAIN1_SPARE_IVA2_CLKCTRL_OFFSET		0x00b0
-#define DRA7XX_CM_L3MAIN1_SPARE_IVA2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00b0)
-#define DRA7XX_CM_L3MAIN1_SPARE_SATA2_CLKCTRL_OFFSET		0x00b8
-#define DRA7XX_CM_L3MAIN1_SPARE_SATA2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00b8)
-#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN4_CLKCTRL_OFFSET		0x00c0
-#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN4_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00c0)
-#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN5_CLKCTRL_OFFSET		0x00c8
-#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN5_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00c8)
-#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN6_CLKCTRL_OFFSET		0x00d0
-#define DRA7XX_CM_L3MAIN1_SPARE_UNKNOWN6_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00d0)
-#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL1_CLKCTRL_OFFSET	0x00d8
-#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL1_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00d8)
-#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL2_CLKCTRL_OFFSET	0x00f0
-#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL2_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00f0)
-#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL3_CLKCTRL_OFFSET	0x00f8
-#define DRA7XX_CM_L3MAIN1_SPARE_VIDEOPLL3_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x00f8)
-#define DRA7XX_CM_IPU2_CLKSTCTRL_OFFSET				0x0200
-#define DRA7XX_CM_IPU2_STATICDEP_OFFSET				0x0204
-#define DRA7XX_CM_IPU2_DYNAMICDEP_OFFSET			0x0208
-#define DRA7XX_CM_IPU2_IPU2_CLKCTRL_OFFSET			0x0220
-#define DRA7XX_CM_IPU2_IPU2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0220)
-#define DRA7XX_CM_DMA_CLKSTCTRL_OFFSET				0x0300
-#define DRA7XX_CM_DMA_STATICDEP_OFFSET				0x0304
-#define DRA7XX_CM_DMA_DYNAMICDEP_OFFSET				0x0308
-#define DRA7XX_CM_DMA_DMA_SYSTEM_CLKCTRL_OFFSET			0x0320
-#define DRA7XX_CM_DMA_DMA_SYSTEM_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0320)
-#define DRA7XX_CM_EMIF_CLKSTCTRL_OFFSET				0x0400
-#define DRA7XX_CM_EMIF_DMM_CLKCTRL_OFFSET			0x0420
-#define DRA7XX_CM_EMIF_DMM_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0420)
-#define DRA7XX_CM_EMIF_EMIF_OCP_FW_CLKCTRL_OFFSET		0x0428
-#define DRA7XX_CM_EMIF_EMIF_OCP_FW_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0428)
-#define DRA7XX_CM_EMIF_EMIF1_CLKCTRL_OFFSET			0x0430
-#define DRA7XX_CM_EMIF_EMIF1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0430)
-#define DRA7XX_CM_EMIF_EMIF2_CLKCTRL_OFFSET			0x0438
-#define DRA7XX_CM_EMIF_EMIF2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0438)
-#define DRA7XX_CM_EMIF_EMIF_DLL_CLKCTRL_OFFSET			0x0440
-#define DRA7XX_CM_EMIF_EMIF_DLL_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0440)
-#define DRA7XX_CM_ATL_ATL_CLKCTRL_OFFSET			0x0500
-#define DRA7XX_CM_ATL_ATL_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0500)
-#define DRA7XX_CM_ATL_CLKSTCTRL_OFFSET				0x0520
-#define DRA7XX_CM_L4CFG_CLKSTCTRL_OFFSET			0x0600
-#define DRA7XX_CM_L4CFG_DYNAMICDEP_OFFSET			0x0608
-#define DRA7XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET			0x0620
-#define DRA7XX_CM_L4CFG_L4_CFG_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0620)
-#define DRA7XX_CM_L4CFG_SPINLOCK_CLKCTRL_OFFSET			0x0628
-#define DRA7XX_CM_L4CFG_SPINLOCK_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0628)
-#define DRA7XX_CM_L4CFG_MAILBOX1_CLKCTRL_OFFSET			0x0630
-#define DRA7XX_CM_L4CFG_MAILBOX1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0630)
-#define DRA7XX_CM_L4CFG_SAR_ROM_CLKCTRL_OFFSET			0x0638
-#define DRA7XX_CM_L4CFG_SAR_ROM_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0638)
-#define DRA7XX_CM_L4CFG_OCP2SCP2_CLKCTRL_OFFSET			0x0640
-#define DRA7XX_CM_L4CFG_OCP2SCP2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0640)
-#define DRA7XX_CM_L4CFG_MAILBOX2_CLKCTRL_OFFSET			0x0648
-#define DRA7XX_CM_L4CFG_MAILBOX2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0648)
-#define DRA7XX_CM_L4CFG_MAILBOX3_CLKCTRL_OFFSET			0x0650
-#define DRA7XX_CM_L4CFG_MAILBOX3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0650)
-#define DRA7XX_CM_L4CFG_MAILBOX4_CLKCTRL_OFFSET			0x0658
-#define DRA7XX_CM_L4CFG_MAILBOX4_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0658)
-#define DRA7XX_CM_L4CFG_MAILBOX5_CLKCTRL_OFFSET			0x0660
-#define DRA7XX_CM_L4CFG_MAILBOX5_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0660)
-#define DRA7XX_CM_L4CFG_MAILBOX6_CLKCTRL_OFFSET			0x0668
-#define DRA7XX_CM_L4CFG_MAILBOX6_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0668)
-#define DRA7XX_CM_L4CFG_MAILBOX7_CLKCTRL_OFFSET			0x0670
-#define DRA7XX_CM_L4CFG_MAILBOX7_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0670)
-#define DRA7XX_CM_L4CFG_MAILBOX8_CLKCTRL_OFFSET			0x0678
-#define DRA7XX_CM_L4CFG_MAILBOX8_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0678)
-#define DRA7XX_CM_L4CFG_MAILBOX9_CLKCTRL_OFFSET			0x0680
-#define DRA7XX_CM_L4CFG_MAILBOX9_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0680)
-#define DRA7XX_CM_L4CFG_MAILBOX10_CLKCTRL_OFFSET		0x0688
-#define DRA7XX_CM_L4CFG_MAILBOX10_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0688)
-#define DRA7XX_CM_L4CFG_MAILBOX11_CLKCTRL_OFFSET		0x0690
-#define DRA7XX_CM_L4CFG_MAILBOX11_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0690)
-#define DRA7XX_CM_L4CFG_MAILBOX12_CLKCTRL_OFFSET		0x0698
-#define DRA7XX_CM_L4CFG_MAILBOX12_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0698)
-#define DRA7XX_CM_L4CFG_MAILBOX13_CLKCTRL_OFFSET		0x06a0
-#define DRA7XX_CM_L4CFG_MAILBOX13_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x06a0)
-#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_RTC_CLKCTRL_OFFSET	0x06a8
-#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_RTC_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x06a8)
-#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_SDRAM_CLKCTRL_OFFSET	0x06b0
-#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_SDRAM_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x06b0)
-#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_WKUP_CLKCTRL_OFFSET	0x06b8
-#define DRA7XX_CM_L4CFG_SPARE_SMARTREFLEX_WKUP_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x06b8)
-#define DRA7XX_CM_L4CFG_IO_DELAY_BLOCK_CLKCTRL_OFFSET		0x06c0
-#define DRA7XX_CM_L4CFG_IO_DELAY_BLOCK_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x06c0)
-#define DRA7XX_CM_L3INSTR_CLKSTCTRL_OFFSET			0x0700
-#define DRA7XX_CM_L3INSTR_L3_MAIN_2_CLKCTRL_OFFSET		0x0720
-#define DRA7XX_CM_L3INSTR_L3_MAIN_2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0720)
-#define DRA7XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET		0x0728
-#define DRA7XX_CM_L3INSTR_L3_INSTR_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0728)
-#define DRA7XX_CM_L3INSTR_OCP_WP_NOC_CLKCTRL_OFFSET		0x0740
-#define DRA7XX_CM_L3INSTR_OCP_WP_NOC_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0740)
-#define DRA7XX_CM_L3INSTR_DLL_AGING_CLKCTRL_OFFSET		0x0748
-#define DRA7XX_CM_L3INSTR_DLL_AGING_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0748)
-#define DRA7XX_CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL_OFFSET	0x0750
-#define DRA7XX_CM_L3INSTR_CTRL_MODULE_BANDGAP_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CORE_INST, 0x0750)
-
-/* CM_CORE.IVA_CM_CORE register offsets */
-#define DRA7XX_CM_IVA_CLKSTCTRL_OFFSET				0x0000
-#define DRA7XX_CM_IVA_STATICDEP_OFFSET				0x0004
-#define DRA7XX_CM_IVA_DYNAMICDEP_OFFSET				0x0008
-#define DRA7XX_CM_IVA_IVA_CLKCTRL_OFFSET			0x0020
-#define DRA7XX_CM_IVA_IVA_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_IVA_INST, 0x0020)
-#define DRA7XX_CM_IVA_SL2_CLKCTRL_OFFSET			0x0028
-#define DRA7XX_CM_IVA_SL2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_IVA_INST, 0x0028)
-
-/* CM_CORE.CAM_CM_CORE register offsets */
-#define DRA7XX_CM_CAM_CLKSTCTRL_OFFSET				0x0000
-#define DRA7XX_CM_CAM_STATICDEP_OFFSET				0x0004
-#define DRA7XX_CM_CAM_VIP1_CLKCTRL_OFFSET			0x0020
-#define DRA7XX_CM_CAM_VIP1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0020)
-#define DRA7XX_CM_CAM_VIP2_CLKCTRL_OFFSET			0x0028
-#define DRA7XX_CM_CAM_VIP2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0028)
-#define DRA7XX_CM_CAM_VIP3_CLKCTRL_OFFSET			0x0030
-#define DRA7XX_CM_CAM_VIP3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0030)
-#define DRA7XX_CM_CAM_LVDSRX_CLKCTRL_OFFSET			0x0038
-#define DRA7XX_CM_CAM_LVDSRX_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0038)
-#define DRA7XX_CM_CAM_CSI1_CLKCTRL_OFFSET			0x0040
-#define DRA7XX_CM_CAM_CSI1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0040)
-#define DRA7XX_CM_CAM_CSI2_CLKCTRL_OFFSET			0x0048
-#define DRA7XX_CM_CAM_CSI2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CAM_INST, 0x0048)
-
-/* CM_CORE.DSS_CM_CORE register offsets */
-#define DRA7XX_CM_DSS_CLKSTCTRL_OFFSET				0x0000
-#define DRA7XX_CM_DSS_STATICDEP_OFFSET				0x0004
-#define DRA7XX_CM_DSS_DYNAMICDEP_OFFSET				0x0008
-#define DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET			0x0020
-#define DRA7XX_CM_DSS_DSS_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_DSS_INST, 0x0020)
-#define DRA7XX_CM_DSS_BB2D_CLKCTRL_OFFSET			0x0030
-#define DRA7XX_CM_DSS_BB2D_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_DSS_INST, 0x0030)
-#define DRA7XX_CM_DSS_SDVENC_CLKCTRL_OFFSET			0x003c
-#define DRA7XX_CM_DSS_SDVENC_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_DSS_INST, 0x003c)
-
-/* CM_CORE.GPU_CM_CORE register offsets */
-#define DRA7XX_CM_GPU_CLKSTCTRL_OFFSET				0x0000
-#define DRA7XX_CM_GPU_STATICDEP_OFFSET				0x0004
-#define DRA7XX_CM_GPU_DYNAMICDEP_OFFSET				0x0008
-#define DRA7XX_CM_GPU_GPU_CLKCTRL_OFFSET			0x0020
-#define DRA7XX_CM_GPU_GPU_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_GPU_INST, 0x0020)
-
-/* CM_CORE.L3INIT_CM_CORE register offsets */
-#define DRA7XX_CM_L3INIT_CLKSTCTRL_OFFSET			0x0000
-#define DRA7XX_CM_L3INIT_STATICDEP_OFFSET			0x0004
-#define DRA7XX_CM_L3INIT_DYNAMICDEP_OFFSET			0x0008
-#define DRA7XX_CM_L3INIT_MMC1_CLKCTRL_OFFSET			0x0028
-#define DRA7XX_CM_L3INIT_MMC1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0028)
-#define DRA7XX_CM_L3INIT_MMC2_CLKCTRL_OFFSET			0x0030
-#define DRA7XX_CM_L3INIT_MMC2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0030)
-#define DRA7XX_CM_L3INIT_USB_OTG_SS2_CLKCTRL_OFFSET		0x0040
-#define DRA7XX_CM_L3INIT_USB_OTG_SS2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0040)
-#define DRA7XX_CM_L3INIT_USB_OTG_SS3_CLKCTRL_OFFSET		0x0048
-#define DRA7XX_CM_L3INIT_USB_OTG_SS3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0048)
-#define DRA7XX_CM_L3INIT_USB_OTG_SS4_CLKCTRL_OFFSET		0x0050
-#define DRA7XX_CM_L3INIT_USB_OTG_SS4_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0050)
-#define DRA7XX_CM_L3INIT_MLB_SS_CLKCTRL_OFFSET			0x0058
-#define DRA7XX_CM_L3INIT_MLB_SS_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0058)
-#define DRA7XX_CM_L3INIT_IEEE1500_2_OCP_CLKCTRL_OFFSET		0x0078
-#define DRA7XX_CM_L3INIT_IEEE1500_2_OCP_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0078)
-#define DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET			0x0088
-#define DRA7XX_CM_L3INIT_SATA_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x0088)
-#define DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET				0x00a0
-#define DRA7XX_CM_PCIE_STATICDEP_OFFSET				0x00a4
-#define DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET			0x00b0
-#define DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00b0)
-#define DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET			0x00b8
-#define DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00b8)
-#define DRA7XX_CM_GMAC_CLKSTCTRL_OFFSET				0x00c0
-#define DRA7XX_CM_GMAC_STATICDEP_OFFSET				0x00c4
-#define DRA7XX_CM_GMAC_DYNAMICDEP_OFFSET			0x00c8
-#define DRA7XX_CM_GMAC_GMAC_CLKCTRL_OFFSET			0x00d0
-#define DRA7XX_CM_GMAC_GMAC_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00d0)
-#define DRA7XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET		0x00e0
-#define DRA7XX_CM_L3INIT_OCP2SCP1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00e0)
-#define DRA7XX_CM_L3INIT_OCP2SCP3_CLKCTRL_OFFSET		0x00e8
-#define DRA7XX_CM_L3INIT_OCP2SCP3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00e8)
-#define DRA7XX_CM_L3INIT_USB_OTG_SS1_CLKCTRL_OFFSET		0x00f0
-#define DRA7XX_CM_L3INIT_USB_OTG_SS1_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L3INIT_INST, 0x00f0)
-
-/* CM_CORE.CUSTEFUSE_CM_CORE register offsets */
-#define DRA7XX_CM_CUSTEFUSE_CLKSTCTRL_OFFSET			0x0000
-#define DRA7XX_CM_CUSTEFUSE_EFUSE_CTRL_CUST_CLKCTRL_OFFSET	0x0020
-#define DRA7XX_CM_CUSTEFUSE_EFUSE_CTRL_CUST_CLKCTRL		DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_CUSTEFUSE_INST, 0x0020)
-
-/* CM_CORE.L4PER_CM_CORE register offsets */
-#define DRA7XX_CM_L4PER_CLKSTCTRL_OFFSET			0x0000
-#define DRA7XX_CM_L4PER_DYNAMICDEP_OFFSET			0x0008
-#define DRA7XX_CM_L4PER2_L4_PER2_CLKCTRL_OFFSET			0x000c
-#define DRA7XX_CM_L4PER2_L4_PER2_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x000c)
-#define DRA7XX_CM_L4PER3_L4_PER3_CLKCTRL_OFFSET			0x0014
-#define DRA7XX_CM_L4PER3_L4_PER3_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0014)
-#define DRA7XX_CM_L4PER2_PRUSS1_CLKCTRL_OFFSET			0x0018
-#define DRA7XX_CM_L4PER2_PRUSS1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0018)
-#define DRA7XX_CM_L4PER2_PRUSS2_CLKCTRL_OFFSET			0x0020
-#define DRA7XX_CM_L4PER2_PRUSS2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0020)
-#define DRA7XX_CM_L4PER_TIMER10_CLKCTRL_OFFSET			0x0028
-#define DRA7XX_CM_L4PER_TIMER10_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0028)
-#define DRA7XX_CM_L4PER_TIMER11_CLKCTRL_OFFSET			0x0030
-#define DRA7XX_CM_L4PER_TIMER11_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0030)
-#define DRA7XX_CM_L4PER_TIMER2_CLKCTRL_OFFSET			0x0038
-#define DRA7XX_CM_L4PER_TIMER2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0038)
-#define DRA7XX_CM_L4PER_TIMER3_CLKCTRL_OFFSET			0x0040
-#define DRA7XX_CM_L4PER_TIMER3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0040)
-#define DRA7XX_CM_L4PER_TIMER4_CLKCTRL_OFFSET			0x0048
-#define DRA7XX_CM_L4PER_TIMER4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0048)
-#define DRA7XX_CM_L4PER_TIMER9_CLKCTRL_OFFSET			0x0050
-#define DRA7XX_CM_L4PER_TIMER9_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0050)
-#define DRA7XX_CM_L4PER_ELM_CLKCTRL_OFFSET			0x0058
-#define DRA7XX_CM_L4PER_ELM_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0058)
-#define DRA7XX_CM_L4PER_GPIO2_CLKCTRL_OFFSET			0x0060
-#define DRA7XX_CM_L4PER_GPIO2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0060)
-#define DRA7XX_CM_L4PER_GPIO3_CLKCTRL_OFFSET			0x0068
-#define DRA7XX_CM_L4PER_GPIO3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0068)
-#define DRA7XX_CM_L4PER_GPIO4_CLKCTRL_OFFSET			0x0070
-#define DRA7XX_CM_L4PER_GPIO4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0070)
-#define DRA7XX_CM_L4PER_GPIO5_CLKCTRL_OFFSET			0x0078
-#define DRA7XX_CM_L4PER_GPIO5_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0078)
-#define DRA7XX_CM_L4PER_GPIO6_CLKCTRL_OFFSET			0x0080
-#define DRA7XX_CM_L4PER_GPIO6_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0080)
-#define DRA7XX_CM_L4PER_HDQ1W_CLKCTRL_OFFSET			0x0088
-#define DRA7XX_CM_L4PER_HDQ1W_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0088)
-#define DRA7XX_CM_L4PER2_PWMSS2_CLKCTRL_OFFSET			0x0090
-#define DRA7XX_CM_L4PER2_PWMSS2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0090)
-#define DRA7XX_CM_L4PER2_PWMSS3_CLKCTRL_OFFSET			0x0098
-#define DRA7XX_CM_L4PER2_PWMSS3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0098)
-#define DRA7XX_CM_L4PER_I2C1_CLKCTRL_OFFSET			0x00a0
-#define DRA7XX_CM_L4PER_I2C1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00a0)
-#define DRA7XX_CM_L4PER_I2C2_CLKCTRL_OFFSET			0x00a8
-#define DRA7XX_CM_L4PER_I2C2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00a8)
-#define DRA7XX_CM_L4PER_I2C3_CLKCTRL_OFFSET			0x00b0
-#define DRA7XX_CM_L4PER_I2C3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00b0)
-#define DRA7XX_CM_L4PER_I2C4_CLKCTRL_OFFSET			0x00b8
-#define DRA7XX_CM_L4PER_I2C4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00b8)
-#define DRA7XX_CM_L4PER_L4_PER1_CLKCTRL_OFFSET			0x00c0
-#define DRA7XX_CM_L4PER_L4_PER1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00c0)
-#define DRA7XX_CM_L4PER2_PWMSS1_CLKCTRL_OFFSET			0x00c4
-#define DRA7XX_CM_L4PER2_PWMSS1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00c4)
-#define DRA7XX_CM_L4PER3_TIMER13_CLKCTRL_OFFSET			0x00c8
-#define DRA7XX_CM_L4PER3_TIMER13_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00c8)
-#define DRA7XX_CM_L4PER3_TIMER14_CLKCTRL_OFFSET			0x00d0
-#define DRA7XX_CM_L4PER3_TIMER14_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00d0)
-#define DRA7XX_CM_L4PER3_TIMER15_CLKCTRL_OFFSET			0x00d8
-#define DRA7XX_CM_L4PER3_TIMER15_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00d8)
-#define DRA7XX_CM_L4PER_MCSPI1_CLKCTRL_OFFSET			0x00f0
-#define DRA7XX_CM_L4PER_MCSPI1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00f0)
-#define DRA7XX_CM_L4PER_MCSPI2_CLKCTRL_OFFSET			0x00f8
-#define DRA7XX_CM_L4PER_MCSPI2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x00f8)
-#define DRA7XX_CM_L4PER_MCSPI3_CLKCTRL_OFFSET			0x0100
-#define DRA7XX_CM_L4PER_MCSPI3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0100)
-#define DRA7XX_CM_L4PER_MCSPI4_CLKCTRL_OFFSET			0x0108
-#define DRA7XX_CM_L4PER_MCSPI4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0108)
-#define DRA7XX_CM_L4PER_GPIO7_CLKCTRL_OFFSET			0x0110
-#define DRA7XX_CM_L4PER_GPIO7_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0110)
-#define DRA7XX_CM_L4PER_GPIO8_CLKCTRL_OFFSET			0x0118
-#define DRA7XX_CM_L4PER_GPIO8_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0118)
-#define DRA7XX_CM_L4PER_MMC3_CLKCTRL_OFFSET			0x0120
-#define DRA7XX_CM_L4PER_MMC3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0120)
-#define DRA7XX_CM_L4PER_MMC4_CLKCTRL_OFFSET			0x0128
-#define DRA7XX_CM_L4PER_MMC4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0128)
-#define DRA7XX_CM_L4PER3_TIMER16_CLKCTRL_OFFSET			0x0130
-#define DRA7XX_CM_L4PER3_TIMER16_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0130)
-#define DRA7XX_CM_L4PER2_QSPI_CLKCTRL_OFFSET			0x0138
-#define DRA7XX_CM_L4PER2_QSPI_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0138)
-#define DRA7XX_CM_L4PER_UART1_CLKCTRL_OFFSET			0x0140
-#define DRA7XX_CM_L4PER_UART1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0140)
-#define DRA7XX_CM_L4PER_UART2_CLKCTRL_OFFSET			0x0148
-#define DRA7XX_CM_L4PER_UART2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0148)
-#define DRA7XX_CM_L4PER_UART3_CLKCTRL_OFFSET			0x0150
-#define DRA7XX_CM_L4PER_UART3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0150)
-#define DRA7XX_CM_L4PER_UART4_CLKCTRL_OFFSET			0x0158
-#define DRA7XX_CM_L4PER_UART4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0158)
-#define DRA7XX_CM_L4PER2_MCASP2_CLKCTRL_OFFSET			0x0160
-#define DRA7XX_CM_L4PER2_MCASP2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0160)
-#define DRA7XX_CM_L4PER2_MCASP3_CLKCTRL_OFFSET			0x0168
-#define DRA7XX_CM_L4PER2_MCASP3_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0168)
-#define DRA7XX_CM_L4PER_UART5_CLKCTRL_OFFSET			0x0170
-#define DRA7XX_CM_L4PER_UART5_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0170)
-#define DRA7XX_CM_L4PER2_MCASP5_CLKCTRL_OFFSET			0x0178
-#define DRA7XX_CM_L4PER2_MCASP5_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0178)
-#define DRA7XX_CM_L4SEC_CLKSTCTRL_OFFSET			0x0180
-#define DRA7XX_CM_L4SEC_STATICDEP_OFFSET			0x0184
-#define DRA7XX_CM_L4SEC_DYNAMICDEP_OFFSET			0x0188
-#define DRA7XX_CM_L4PER2_MCASP8_CLKCTRL_OFFSET			0x0190
-#define DRA7XX_CM_L4PER2_MCASP8_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0190)
-#define DRA7XX_CM_L4PER2_MCASP4_CLKCTRL_OFFSET			0x0198
-#define DRA7XX_CM_L4PER2_MCASP4_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0198)
-#define DRA7XX_CM_L4SEC_AES1_CLKCTRL_OFFSET			0x01a0
-#define DRA7XX_CM_L4SEC_AES1_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01a0)
-#define DRA7XX_CM_L4SEC_AES2_CLKCTRL_OFFSET			0x01a8
-#define DRA7XX_CM_L4SEC_AES2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01a8)
-#define DRA7XX_CM_L4SEC_DES3DES_CLKCTRL_OFFSET			0x01b0
-#define DRA7XX_CM_L4SEC_DES3DES_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01b0)
-#define DRA7XX_CM_L4SEC_FPKA_CLKCTRL_OFFSET			0x01b8
-#define DRA7XX_CM_L4SEC_FPKA_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01b8)
-#define DRA7XX_CM_L4SEC_RNG_CLKCTRL_OFFSET			0x01c0
-#define DRA7XX_CM_L4SEC_RNG_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01c0)
-#define DRA7XX_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET			0x01c8
-#define DRA7XX_CM_L4SEC_SHA2MD51_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01c8)
-#define DRA7XX_CM_L4PER2_UART7_CLKCTRL_OFFSET			0x01d0
-#define DRA7XX_CM_L4PER2_UART7_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01d0)
-#define DRA7XX_CM_L4SEC_DMA_CRYPTO_CLKCTRL_OFFSET		0x01d8
-#define DRA7XX_CM_L4SEC_DMA_CRYPTO_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01d8)
-#define DRA7XX_CM_L4PER2_UART8_CLKCTRL_OFFSET			0x01e0
-#define DRA7XX_CM_L4PER2_UART8_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01e0)
-#define DRA7XX_CM_L4PER2_UART9_CLKCTRL_OFFSET			0x01e8
-#define DRA7XX_CM_L4PER2_UART9_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01e8)
-#define DRA7XX_CM_L4PER2_DCAN2_CLKCTRL_OFFSET			0x01f0
-#define DRA7XX_CM_L4PER2_DCAN2_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01f0)
-#define DRA7XX_CM_L4SEC_SHA2MD52_CLKCTRL_OFFSET			0x01f8
-#define DRA7XX_CM_L4SEC_SHA2MD52_CLKCTRL			DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x01f8)
-#define DRA7XX_CM_L4PER2_CLKSTCTRL_OFFSET			0x01fc
-#define DRA7XX_CM_L4PER2_DYNAMICDEP_OFFSET			0x0200
-#define DRA7XX_CM_L4PER2_MCASP6_CLKCTRL_OFFSET			0x0204
-#define DRA7XX_CM_L4PER2_MCASP6_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0204)
-#define DRA7XX_CM_L4PER2_MCASP7_CLKCTRL_OFFSET			0x0208
-#define DRA7XX_CM_L4PER2_MCASP7_CLKCTRL				DRA7XX_CM_CORE_REGADDR(DRA7XX_CM_CORE_L4PER_INST, 0x0208)
-#define DRA7XX_CM_L4PER2_STATICDEP_OFFSET			0x020c
-#define DRA7XX_CM_L4PER3_CLKSTCTRL_OFFSET			0x0210
-#define DRA7XX_CM_L4PER3_DYNAMICDEP_OFFSET			0x0214
-
 #endif
diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
index 0827acb60584..1c6d69f4bf49 100644
--- a/arch/arm/mach-omap2/cm2xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx.c
@@ -95,103 +95,6 @@ void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
 	_omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
 }
 
-/*
- * APLL control
- */
-
-static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
-{
-	u32 v;
-
-	v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
-	v &= ~mask;
-	v |= m << __ffs(mask);
-	omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
-}
-
-void omap2xxx_cm_set_apll54_disable_autoidle(void)
-{
-	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
-				    OMAP24XX_AUTO_54M_MASK);
-}
-
-void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
-{
-	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
-				    OMAP24XX_AUTO_54M_MASK);
-}
-
-void omap2xxx_cm_set_apll96_disable_autoidle(void)
-{
-	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
-				    OMAP24XX_AUTO_96M_MASK);
-}
-
-void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
-{
-	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
-				    OMAP24XX_AUTO_96M_MASK);
-}
-
-/* Enable an APLL if off */
-static int _omap2xxx_apll_enable(u8 enable_bit, u8 status_bit)
-{
-	u32 v, m;
-
-	m = EN_APLL_LOCKED << enable_bit;
-
-	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-	if (v & m)
-		return 0;   /* apll already enabled */
-
-	v |= m;
-	omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
-
-	omap2xxx_cm_wait_module_ready(0, PLL_MOD, 1, status_bit);
-
-	/*
-	 * REVISIT: Should we return an error code if
-	 * omap2xxx_cm_wait_module_ready() fails?
-	 */
-	return 0;
-}
-
-/* Stop APLL */
-static void _omap2xxx_apll_disable(u8 enable_bit)
-{
-	u32 v;
-
-	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-	v &= ~(EN_APLL_LOCKED << enable_bit);
-	omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
-}
-
-/* Enable an APLL if off */
-int omap2xxx_cm_apll54_enable(void)
-{
-	return _omap2xxx_apll_enable(OMAP24XX_EN_54M_PLL_SHIFT,
-				     OMAP24XX_ST_54M_APLL_SHIFT);
-}
-
-/* Enable an APLL if off */
-int omap2xxx_cm_apll96_enable(void)
-{
-	return _omap2xxx_apll_enable(OMAP24XX_EN_96M_PLL_SHIFT,
-				     OMAP24XX_ST_96M_APLL_SHIFT);
-}
-
-/* Stop APLL */
-void omap2xxx_cm_apll54_disable(void)
-{
-	_omap2xxx_apll_disable(OMAP24XX_EN_54M_PLL_SHIFT);
-}
-
-/* Stop APLL */
-void omap2xxx_cm_apll96_disable(void)
-{
-	_omap2xxx_apll_disable(OMAP24XX_EN_96M_PLL_SHIFT);
-}
-
 /**
  * omap2xxx_cm_split_idlest_reg - split CM_IDLEST reg addr into its components
  * @idlest_reg: CM_IDLEST* virtual address
@@ -242,8 +145,8 @@ static int omap2xxx_cm_split_idlest_reg(struct clk_omap_reg *idlest_reg,
  * (@prcm_mod, @idlest_id, @idlest_shift) is clocked.  Return 0 upon
  * success or -EBUSY if the module doesn't enable in time.
  */
-int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
-				  u8 idlest_shift)
+static int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
+					 u8 idlest_shift)
 {
 	int ena = 0, i = 0;
 	u8 cm_idlest_reg;
diff --git a/arch/arm/mach-omap2/cm2xxx.h b/arch/arm/mach-omap2/cm2xxx.h
index 004016d7459e..7cbeff15ffb0 100644
--- a/arch/arm/mach-omap2/cm2xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx.h
@@ -46,13 +46,6 @@
 extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
 extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
 
-extern void omap2xxx_cm_set_apll54_disable_autoidle(void);
-extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
-extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
-extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
-
-int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
-				  u8 idlest_shift);
 extern int omap2xxx_cm_fclks_active(void);
 extern int omap2xxx_cm_mpu_retention_allowed(void);
 extern u32 omap2xxx_cm_get_core_clk_src(void);
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h
index 70944b94cc09..6dfc09383160 100644
--- a/arch/arm/mach-omap2/cm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h
@@ -93,11 +93,6 @@ static inline u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 	return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
 }
 
-extern int omap2xxx_cm_apll54_enable(void);
-extern void omap2xxx_cm_apll54_disable(void);
-extern int omap2xxx_cm_apll96_enable(void);
-extern void omap2xxx_cm_apll96_disable(void);
-
 #endif
 
 /* CM register bits shared between 24XX and 3430 */
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index ac4882ebdca3..c824d4e3db63 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -1,19 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * AM33XX CM functions
  *
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
  * Vaibhav Hiremath <hvaibhav@ti.com>
  *
- * Reference taken from from OMAP4 cminst44xx.c
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Reference taken from OMAP4 cminst44xx.c
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h
index 63b362bfc4d9..456267a7af71 100644
--- a/arch/arm/mach-omap2/cm33xx.h
+++ b/arch/arm/mach-omap2/cm33xx.h
@@ -1,17 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * AM33XX CM offset macros
  *
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
  * Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_CM_33XX_H
@@ -37,8 +29,6 @@
 #define AM33XX_CM_GFX_MOD		0x0900
 #define AM33XX_CM_CEFUSE_MOD		0x0A00
 
-/* CM */
-
 /* CM.PER_CM register offsets */
 #define AM33XX_CM_PER_L4LS_CLKSTCTRL_OFFSET		0x0000
 #define AM33XX_CM_PER_L4LS_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0000)
@@ -48,330 +38,52 @@
 #define AM33XX_CM_PER_L4FW_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0008)
 #define AM33XX_CM_PER_L3_CLKSTCTRL_OFFSET		0x000c
 #define AM33XX_CM_PER_L3_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x000c)
-#define AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET		0x0014
-#define AM33XX_CM_PER_CPGMAC0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0014)
-#define AM33XX_CM_PER_LCDC_CLKCTRL_OFFSET		0x0018
-#define AM33XX_CM_PER_LCDC_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0018)
-#define AM33XX_CM_PER_USB0_CLKCTRL_OFFSET		0x001c
-#define AM33XX_CM_PER_USB0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x001c)
-#define AM33XX_CM_PER_MLB_CLKCTRL_OFFSET		0x0020
-#define AM33XX_CM_PER_MLB_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0020)
-#define AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET		0x0024
-#define AM33XX_CM_PER_TPTC0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0024)
 #define AM33XX_CM_PER_EMIF_CLKCTRL_OFFSET		0x0028
 #define AM33XX_CM_PER_EMIF_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0028)
-#define AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET		0x002c
-#define AM33XX_CM_PER_OCMCRAM_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x002c)
-#define AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET		0x0030
-#define AM33XX_CM_PER_GPMC_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0030)
-#define AM33XX_CM_PER_MCASP0_CLKCTRL_OFFSET		0x0034
-#define AM33XX_CM_PER_MCASP0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0034)
-#define AM33XX_CM_PER_UART5_CLKCTRL_OFFSET		0x0038
-#define AM33XX_CM_PER_UART5_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0038)
-#define AM33XX_CM_PER_MMC0_CLKCTRL_OFFSET		0x003c
-#define AM33XX_CM_PER_MMC0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x003c)
-#define AM33XX_CM_PER_ELM_CLKCTRL_OFFSET		0x0040
-#define AM33XX_CM_PER_ELM_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0040)
-#define AM33XX_CM_PER_I2C2_CLKCTRL_OFFSET		0x0044
-#define AM33XX_CM_PER_I2C2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0044)
-#define AM33XX_CM_PER_I2C1_CLKCTRL_OFFSET		0x0048
-#define AM33XX_CM_PER_I2C1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0048)
-#define AM33XX_CM_PER_SPI0_CLKCTRL_OFFSET		0x004c
-#define AM33XX_CM_PER_SPI0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x004c)
-#define AM33XX_CM_PER_SPI1_CLKCTRL_OFFSET		0x0050
-#define AM33XX_CM_PER_SPI1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0050)
-#define AM33XX_CM_PER_SPI2_CLKCTRL_OFFSET		0x0054
-#define AM33XX_CM_PER_SPI2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0054)
-#define AM33XX_CM_PER_SPI3_CLKCTRL_OFFSET		0x0058
-#define AM33XX_CM_PER_SPI3_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0058)
-#define AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET		0x0060
-#define AM33XX_CM_PER_L4LS_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0060)
-#define AM33XX_CM_PER_L4FW_CLKCTRL_OFFSET		0x0064
-#define AM33XX_CM_PER_L4FW_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0064)
-#define AM33XX_CM_PER_MCASP1_CLKCTRL_OFFSET		0x0068
-#define AM33XX_CM_PER_MCASP1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0068)
-#define AM33XX_CM_PER_UART1_CLKCTRL_OFFSET		0x006c
-#define AM33XX_CM_PER_UART1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x006c)
-#define AM33XX_CM_PER_UART2_CLKCTRL_OFFSET		0x0070
-#define AM33XX_CM_PER_UART2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0070)
-#define AM33XX_CM_PER_UART3_CLKCTRL_OFFSET		0x0074
-#define AM33XX_CM_PER_UART3_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0074)
-#define AM33XX_CM_PER_UART4_CLKCTRL_OFFSET		0x0078
-#define AM33XX_CM_PER_UART4_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0078)
-#define AM33XX_CM_PER_TIMER7_CLKCTRL_OFFSET		0x007c
-#define AM33XX_CM_PER_TIMER7_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x007c)
-#define AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET		0x0080
-#define AM33XX_CM_PER_TIMER2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0080)
-#define AM33XX_CM_PER_TIMER3_CLKCTRL_OFFSET		0x0084
-#define AM33XX_CM_PER_TIMER3_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0084)
-#define AM33XX_CM_PER_TIMER4_CLKCTRL_OFFSET		0x0088
-#define AM33XX_CM_PER_TIMER4_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0088)
-#define AM33XX_CM_PER_MCASP2_CLKCTRL_OFFSET		0x008c
-#define AM33XX_CM_PER_MCASP2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x008c)
-#define AM33XX_CM_PER_RNG_CLKCTRL_OFFSET		0x0090
-#define AM33XX_CM_PER_RNG_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0090)
-#define AM33XX_CM_PER_AES0_CLKCTRL_OFFSET		0x0094
-#define AM33XX_CM_PER_AES0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0094)
-#define AM33XX_CM_PER_AES1_CLKCTRL_OFFSET		0x0098
-#define AM33XX_CM_PER_AES1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0098)
-#define AM33XX_CM_PER_DES_CLKCTRL_OFFSET		0x009c
-#define AM33XX_CM_PER_DES_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x009c)
-#define AM33XX_CM_PER_SHA0_CLKCTRL_OFFSET		0x00a0
-#define AM33XX_CM_PER_SHA0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a0)
-#define AM33XX_CM_PER_PKA_CLKCTRL_OFFSET		0x00a4
-#define AM33XX_CM_PER_PKA_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a4)
-#define AM33XX_CM_PER_GPIO6_CLKCTRL_OFFSET		0x00a8
-#define AM33XX_CM_PER_GPIO6_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00a8)
-#define AM33XX_CM_PER_GPIO1_CLKCTRL_OFFSET		0x00ac
-#define AM33XX_CM_PER_GPIO1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00ac)
-#define AM33XX_CM_PER_GPIO2_CLKCTRL_OFFSET		0x00b0
-#define AM33XX_CM_PER_GPIO2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b0)
-#define AM33XX_CM_PER_GPIO3_CLKCTRL_OFFSET		0x00b4
-#define AM33XX_CM_PER_GPIO3_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b4)
-#define AM33XX_CM_PER_GPIO4_CLKCTRL_OFFSET		0x00b8
-#define AM33XX_CM_PER_GPIO4_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00b8)
-#define AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET		0x00bc
-#define AM33XX_CM_PER_TPCC_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00bc)
-#define AM33XX_CM_PER_DCAN0_CLKCTRL_OFFSET		0x00c0
-#define AM33XX_CM_PER_DCAN0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00c0)
-#define AM33XX_CM_PER_DCAN1_CLKCTRL_OFFSET		0x00c4
-#define AM33XX_CM_PER_DCAN1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00c4)
-#define AM33XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET		0x00cc
-#define AM33XX_CM_PER_EPWMSS1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00cc)
-#define AM33XX_CM_PER_EMIF_FW_CLKCTRL_OFFSET		0x00d0
-#define AM33XX_CM_PER_EMIF_FW_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d0)
-#define AM33XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET		0x00d4
-#define AM33XX_CM_PER_EPWMSS0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d4)
-#define AM33XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET		0x00d8
-#define AM33XX_CM_PER_EPWMSS2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00d8)
-#define AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET		0x00dc
-#define AM33XX_CM_PER_L3_INSTR_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00dc)
-#define AM33XX_CM_PER_L3_CLKCTRL_OFFSET			0x00e0
-#define AM33XX_CM_PER_L3_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e0)
-#define AM33XX_CM_PER_IEEE5000_CLKCTRL_OFFSET		0x00e4
-#define AM33XX_CM_PER_IEEE5000_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e4)
-#define AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET		0x00e8
-#define AM33XX_CM_PER_PRUSS_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00e8)
-#define AM33XX_CM_PER_TIMER5_CLKCTRL_OFFSET		0x00ec
-#define AM33XX_CM_PER_TIMER5_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00ec)
-#define AM33XX_CM_PER_TIMER6_CLKCTRL_OFFSET		0x00f0
-#define AM33XX_CM_PER_TIMER6_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f0)
-#define AM33XX_CM_PER_MMC1_CLKCTRL_OFFSET		0x00f4
-#define AM33XX_CM_PER_MMC1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f4)
-#define AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET		0x00f8
-#define AM33XX_CM_PER_MMC2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00f8)
-#define AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET		0x00fc
-#define AM33XX_CM_PER_TPTC1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x00fc)
-#define AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET		0x0100
-#define AM33XX_CM_PER_TPTC2_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0100)
-#define AM33XX_CM_PER_GPIO5_CLKCTRL_OFFSET		0x0104
-#define AM33XX_CM_PER_GPIO5_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0104)
-#define AM33XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET		0x010c
-#define AM33XX_CM_PER_SPINLOCK_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x010c)
-#define AM33XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET		0x0110
-#define AM33XX_CM_PER_MAILBOX0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0110)
 #define AM33XX_CM_PER_L4HS_CLKSTCTRL_OFFSET		0x011c
 #define AM33XX_CM_PER_L4HS_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x011c)
-#define AM33XX_CM_PER_L4HS_CLKCTRL_OFFSET		0x0120
-#define AM33XX_CM_PER_L4HS_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0120)
-#define AM33XX_CM_PER_MSTR_EXPS_CLKCTRL_OFFSET		0x0124
-#define AM33XX_CM_PER_MSTR_EXPS_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0124)
-#define AM33XX_CM_PER_SLV_EXPS_CLKCTRL_OFFSET		0x0128
-#define AM33XX_CM_PER_SLV_EXPS_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0128)
 #define AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL_OFFSET		0x012c
 #define AM33XX_CM_PER_OCPWP_L3_CLKSTCTRL		AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x012c)
-#define AM33XX_CM_PER_OCPWP_CLKCTRL_OFFSET		0x0130
-#define AM33XX_CM_PER_OCPWP_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0130)
-#define AM33XX_CM_PER_MAILBOX1_CLKCTRL_OFFSET		0x0134
-#define AM33XX_CM_PER_MAILBOX1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0134)
 #define AM33XX_CM_PER_PRUSS_CLKSTCTRL_OFFSET		0x0140
 #define AM33XX_CM_PER_PRUSS_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0140)
 #define AM33XX_CM_PER_CPSW_CLKSTCTRL_OFFSET		0x0144
 #define AM33XX_CM_PER_CPSW_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0144)
 #define AM33XX_CM_PER_LCDC_CLKSTCTRL_OFFSET		0x0148
 #define AM33XX_CM_PER_LCDC_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0148)
-#define AM33XX_CM_PER_CLKDIV32K_CLKCTRL_OFFSET		0x014c
-#define AM33XX_CM_PER_CLKDIV32K_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x014c)
 #define AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL_OFFSET	0x0150
 #define AM33XX_CM_PER_CLK_24MHZ_CLKSTCTRL		AM33XX_CM_REGADDR(AM33XX_CM_PER_MOD, 0x0150)
 
 /* CM.WKUP_CM register offsets */
 #define AM33XX_CM_WKUP_CLKSTCTRL_OFFSET			0x0000
 #define AM33XX_CM_WKUP_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0000)
-#define AM33XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET		0x0004
-#define AM33XX_CM_WKUP_CONTROL_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0004)
-#define AM33XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET		0x0008
-#define AM33XX_CM_WKUP_GPIO0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0008)
-#define AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET		0x000c
-#define AM33XX_CM_WKUP_L4WKUP_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x000c)
-#define AM33XX_CM_WKUP_TIMER0_CLKCTRL_OFFSET		0x0010
-#define AM33XX_CM_WKUP_TIMER0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0010)
-#define AM33XX_CM_WKUP_DEBUGSS_CLKCTRL_OFFSET		0x0014
-#define AM33XX_CM_WKUP_DEBUGSS_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0014)
 #define AM33XX_CM_L3_AON_CLKSTCTRL_OFFSET		0x0018
 #define AM33XX_CM_L3_AON_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0018)
-#define AM33XX_CM_AUTOIDLE_DPLL_MPU_OFFSET		0x001c
-#define AM33XX_CM_AUTOIDLE_DPLL_MPU			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x001c)
-#define AM33XX_CM_IDLEST_DPLL_MPU_OFFSET		0x0020
-#define AM33XX_CM_IDLEST_DPLL_MPU			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0020)
-#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET	0x0024
-#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_MPU		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0024)
-#define AM33XX_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET	0x0028
-#define AM33XX_CM_SSC_MODFREQDIV_DPLL_MPU		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0028)
-#define AM33XX_CM_CLKSEL_DPLL_MPU_OFFSET		0x002c
-#define AM33XX_CM_CLKSEL_DPLL_MPU			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x002c)
-#define AM33XX_CM_AUTOIDLE_DPLL_DDR_OFFSET		0x0030
-#define AM33XX_CM_AUTOIDLE_DPLL_DDR			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0030)
-#define AM33XX_CM_IDLEST_DPLL_DDR_OFFSET		0x0034
-#define AM33XX_CM_IDLEST_DPLL_DDR			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0034)
-#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DDR_OFFSET	0x0038
-#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DDR		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0038)
-#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DDR_OFFSET	0x003c
-#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DDR		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x003c)
-#define AM33XX_CM_CLKSEL_DPLL_DDR_OFFSET		0x0040
-#define AM33XX_CM_CLKSEL_DPLL_DDR			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0040)
-#define AM33XX_CM_AUTOIDLE_DPLL_DISP_OFFSET		0x0044
-#define AM33XX_CM_AUTOIDLE_DPLL_DISP			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0044)
-#define AM33XX_CM_IDLEST_DPLL_DISP_OFFSET		0x0048
-#define AM33XX_CM_IDLEST_DPLL_DISP			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0048)
-#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DISP_OFFSET	0x004c
-#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_DISP		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x004c)
-#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DISP_OFFSET	0x0050
-#define AM33XX_CM_SSC_MODFREQDIV_DPLL_DISP		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0050)
-#define AM33XX_CM_CLKSEL_DPLL_DISP_OFFSET		0x0054
-#define AM33XX_CM_CLKSEL_DPLL_DISP			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0054)
-#define AM33XX_CM_AUTOIDLE_DPLL_CORE_OFFSET		0x0058
-#define AM33XX_CM_AUTOIDLE_DPLL_CORE			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0058)
-#define AM33XX_CM_IDLEST_DPLL_CORE_OFFSET		0x005c
-#define AM33XX_CM_IDLEST_DPLL_CORE			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x005c)
-#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET	0x0060
-#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_CORE		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0060)
-#define AM33XX_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET	0x0064
-#define AM33XX_CM_SSC_MODFREQDIV_DPLL_CORE		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0064)
-#define AM33XX_CM_CLKSEL_DPLL_CORE_OFFSET		0x0068
-#define AM33XX_CM_CLKSEL_DPLL_CORE			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0068)
-#define AM33XX_CM_AUTOIDLE_DPLL_PER_OFFSET		0x006c
-#define AM33XX_CM_AUTOIDLE_DPLL_PER			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x006c)
-#define AM33XX_CM_IDLEST_DPLL_PER_OFFSET		0x0070
-#define AM33XX_CM_IDLEST_DPLL_PER			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0070)
-#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET	0x0074
-#define AM33XX_CM_SSC_DELTAMSTEP_DPLL_PER		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0074)
-#define AM33XX_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET	0x0078
-#define AM33XX_CM_SSC_MODFREQDIV_DPLL_PER		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0078)
-#define AM33XX_CM_CLKDCOLDO_DPLL_PER_OFFSET		0x007c
-#define AM33XX_CM_CLKDCOLDO_DPLL_PER			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x007c)
-#define AM33XX_CM_DIV_M4_DPLL_CORE_OFFSET		0x0080
-#define AM33XX_CM_DIV_M4_DPLL_CORE			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0080)
-#define AM33XX_CM_DIV_M5_DPLL_CORE_OFFSET		0x0084
-#define AM33XX_CM_DIV_M5_DPLL_CORE			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0084)
-#define AM33XX_CM_CLKMODE_DPLL_MPU_OFFSET		0x0088
-#define AM33XX_CM_CLKMODE_DPLL_MPU			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0088)
-#define AM33XX_CM_CLKMODE_DPLL_PER_OFFSET		0x008c
-#define AM33XX_CM_CLKMODE_DPLL_PER			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x008c)
-#define AM33XX_CM_CLKMODE_DPLL_CORE_OFFSET		0x0090
-#define AM33XX_CM_CLKMODE_DPLL_CORE			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0090)
-#define AM33XX_CM_CLKMODE_DPLL_DDR_OFFSET		0x0094
-#define AM33XX_CM_CLKMODE_DPLL_DDR			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0094)
-#define AM33XX_CM_CLKMODE_DPLL_DISP_OFFSET		0x0098
-#define AM33XX_CM_CLKMODE_DPLL_DISP			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x0098)
-#define AM33XX_CM_CLKSEL_DPLL_PERIPH_OFFSET		0x009c
-#define AM33XX_CM_CLKSEL_DPLL_PERIPH			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x009c)
-#define AM33XX_CM_DIV_M2_DPLL_DDR_OFFSET		0x00a0
-#define AM33XX_CM_DIV_M2_DPLL_DDR			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a0)
-#define AM33XX_CM_DIV_M2_DPLL_DISP_OFFSET		0x00a4
-#define AM33XX_CM_DIV_M2_DPLL_DISP			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a4)
-#define AM33XX_CM_DIV_M2_DPLL_MPU_OFFSET		0x00a8
-#define AM33XX_CM_DIV_M2_DPLL_MPU			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00a8)
-#define AM33XX_CM_DIV_M2_DPLL_PER_OFFSET		0x00ac
-#define AM33XX_CM_DIV_M2_DPLL_PER			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00ac)
-#define AM33XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET		0x00b0
-#define AM33XX_CM_WKUP_WKUP_M3_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b0)
-#define AM33XX_CM_WKUP_UART0_CLKCTRL_OFFSET		0x00b4
-#define AM33XX_CM_WKUP_UART0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b4)
-#define AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET		0x00b8
-#define AM33XX_CM_WKUP_I2C0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00b8)
-#define AM33XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET		0x00bc
-#define AM33XX_CM_WKUP_ADC_TSC_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00bc)
-#define AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET	0x00c0
-#define AM33XX_CM_WKUP_SMARTREFLEX0_CLKCTRL		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c0)
-#define AM33XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET		0x00c4
-#define AM33XX_CM_WKUP_TIMER1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c4)
-#define AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET	0x00c8
-#define AM33XX_CM_WKUP_SMARTREFLEX1_CLKCTRL		AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00c8)
 #define AM33XX_CM_L4_WKUP_AON_CLKSTCTRL_OFFSET		0x00cc
 #define AM33XX_CM_L4_WKUP_AON_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00cc)
-#define AM33XX_CM_WKUP_WDT0_CLKCTRL_OFFSET		0x00d0
-#define AM33XX_CM_WKUP_WDT0_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d0)
-#define AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET		0x00d4
-#define AM33XX_CM_WKUP_WDT1_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d4)
-#define AM33XX_CM_DIV_M6_DPLL_CORE_OFFSET		0x00d8
-#define AM33XX_CM_DIV_M6_DPLL_CORE			AM33XX_CM_REGADDR(AM33XX_CM_WKUP_MOD, 0x00d8)
 
 /* CM.DPLL_CM register offsets */
-#define AM33XX_CLKSEL_TIMER7_CLK_OFFSET			0x0004
-#define AM33XX_CLKSEL_TIMER7_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0004)
-#define AM33XX_CLKSEL_TIMER2_CLK_OFFSET			0x0008
-#define AM33XX_CLKSEL_TIMER2_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0008)
-#define AM33XX_CLKSEL_TIMER3_CLK_OFFSET			0x000c
-#define AM33XX_CLKSEL_TIMER3_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x000c)
-#define AM33XX_CLKSEL_TIMER4_CLK_OFFSET			0x0010
-#define AM33XX_CLKSEL_TIMER4_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0010)
-#define AM33XX_CM_MAC_CLKSEL_OFFSET			0x0014
-#define AM33XX_CM_MAC_CLKSEL				AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0014)
-#define AM33XX_CLKSEL_TIMER5_CLK_OFFSET			0x0018
-#define AM33XX_CLKSEL_TIMER5_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0018)
-#define AM33XX_CLKSEL_TIMER6_CLK_OFFSET			0x001c
-#define AM33XX_CLKSEL_TIMER6_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x001c)
-#define AM33XX_CM_CPTS_RFT_CLKSEL_OFFSET		0x0020
-#define AM33XX_CM_CPTS_RFT_CLKSEL			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0020)
-#define AM33XX_CLKSEL_TIMER1MS_CLK_OFFSET		0x0028
-#define AM33XX_CLKSEL_TIMER1MS_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0028)
-#define AM33XX_CLKSEL_GFX_FCLK_OFFSET			0x002c
 #define AM33XX_CLKSEL_GFX_FCLK				AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x002c)
-#define AM33XX_CLKSEL_PRUSS_OCP_CLK_OFFSET		0x0030
-#define AM33XX_CLKSEL_PRUSS_OCP_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0030)
-#define AM33XX_CLKSEL_LCDC_PIXEL_CLK_OFFSET		0x0034
-#define AM33XX_CLKSEL_LCDC_PIXEL_CLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0034)
-#define AM33XX_CLKSEL_WDT1_CLK_OFFSET			0x0038
-#define AM33XX_CLKSEL_WDT1_CLK				AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x0038)
-#define AM33XX_CLKSEL_GPIO0_DBCLK_OFFSET		0x003c
-#define AM33XX_CLKSEL_GPIO0_DBCLK			AM33XX_CM_REGADDR(AM33XX_CM_DPLL_MOD, 0x003c)
 
 /* CM.MPU_CM register offsets */
 #define AM33XX_CM_MPU_CLKSTCTRL_OFFSET			0x0000
 #define AM33XX_CM_MPU_CLKSTCTRL				AM33XX_CM_REGADDR(AM33XX_CM_MPU_MOD, 0x0000)
-#define AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET		0x0004
 #define AM33XX_CM_MPU_MPU_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_MPU_MOD, 0x0004)
 
 /* CM.DEVICE_CM register offsets */
-#define AM33XX_CM_CLKOUT_CTRL_OFFSET			0x0000
-#define AM33XX_CM_CLKOUT_CTRL				AM33XX_CM_REGADDR(AM33XX_CM_DEVICE_MOD, 0x0000)
 
 /* CM.RTC_CM register offsets */
-#define AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET		0x0000
-#define AM33XX_CM_RTC_RTC_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_RTC_MOD, 0x0000)
 #define AM33XX_CM_RTC_CLKSTCTRL_OFFSET			0x0004
 #define AM33XX_CM_RTC_CLKSTCTRL				AM33XX_CM_REGADDR(AM33XX_CM_RTC_MOD, 0x0004)
 
 /* CM.GFX_CM register offsets */
 #define AM33XX_CM_GFX_L3_CLKSTCTRL_OFFSET		0x0000
 #define AM33XX_CM_GFX_L3_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0000)
-#define AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET		0x0004
-#define AM33XX_CM_GFX_GFX_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0004)
-#define AM33XX_CM_GFX_BITBLT_CLKCTRL_OFFSET		0x0008
-#define AM33XX_CM_GFX_BITBLT_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0008)
 #define AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1_OFFSET	0x000c
 #define AM33XX_CM_GFX_L4LS_GFX_CLKSTCTRL__1		AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x000c)
-#define AM33XX_CM_GFX_MMUCFG_CLKCTRL_OFFSET		0x0010
-#define AM33XX_CM_GFX_MMUCFG_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0010)
-#define AM33XX_CM_GFX_MMUDATA_CLKCTRL_OFFSET		0x0014
-#define AM33XX_CM_GFX_MMUDATA_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_GFX_MOD, 0x0014)
 
 /* CM.CEFUSE_CM register offsets */
 #define AM33XX_CM_CEFUSE_CLKSTCTRL_OFFSET		0x0000
 #define AM33XX_CM_CEFUSE_CLKSTCTRL			AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0000)
-#define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET		0x0020
-#define AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL			AM33XX_CM_REGADDR(AM33XX_CM_CEFUSE_MOD, 0x0020)
 
 
 #ifndef __ASSEMBLER__
diff --git a/arch/arm/mach-omap2/cm81xx.h b/arch/arm/mach-omap2/cm81xx.h
index bd91223e838e..ffcde1812c6c 100644
--- a/arch/arm/mach-omap2/cm81xx.h
+++ b/arch/arm/mach-omap2/cm81xx.h
@@ -1,17 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Clock domain register offsets for TI81XX.
  *
  * Copyright (C) 2010 Texas Instruments, Inc. - https://www.ti.com/
  * Copyright (C) 2013 SKTB SKiT, http://www.skitlab.ru/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_CM_TI81XX_H
diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c
index b7ea609386d5..87f2c2d2d754 100644
--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -38,19 +38,6 @@ struct omap_domain_base cm2_base;
 #define CM_SINGLE_INSTANCE	0x2
 
 /**
- * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use)
- * @cm: CM base virtual address
- * @cm2: CM2 base virtual address (if present on the booted SoC)
- *
- * XXX Will be replaced when the PRM/CM drivers are completed.
- */
-void __init omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2)
-{
-	cm_base.va = cm;
-	cm2_base.va = cm2;
-}
-
-/**
  * cm_split_idlest_reg - split CM_IDLEST reg addr into its components
  * @idlest_reg: CM_IDLEST* virtual address
  * @prcm_inst: pointer to an s16 to return the PRCM instance offset
@@ -333,8 +320,10 @@ int __init omap2_cm_base_init(void)
 		data = (struct omap_prcm_init_data *)match->data;
 
 		ret = of_address_to_resource(np, 0, &res);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			return ret;
+		}
 
 		if (data->index == TI_CLKM_CM)
 			mem = &cm_base;
@@ -380,8 +369,10 @@ int __init omap_cm_init(void)
 			continue;
 
 		ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			return ret;
+		}
 	}
 
 	return 0;
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index b23962c38fb2..69694af71475 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -2,12 +2,10 @@
 #ifndef __OMAP_COMMON_BOARD_DEVICES__
 #define __OMAP_COMMON_BOARD_DEVICES__
 
-#include <sound/tlv320aic3x.h>
 #include <linux/mfd/menelaus.h>
 
 void *n8x0_legacy_init(void);
 
 extern struct menelaus_platform_data n8x0_menelaus_platform_data;
-extern struct aic3x_pdata n810_aic33_data;
 
 #endif /* __OMAP_COMMON_BOARD_DEVICES__ */
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 49926eced5f1..9d60799e9752 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -38,24 +38,12 @@
 #include <asm/hardware/cache-l2x0.h>
 
 #include "i2c.h"
-#include "serial.h"
-
-#include "usb.h"
 
 #define OMAP_INTC_START		NR_IRQS
 
 extern int (*omap_pm_soc_init)(void);
 int omap_pm_nop_init(void);
 
-#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP2)
-int omap2_pm_init(void);
-#else
-static inline int omap2_pm_init(void)
-{
-	return 0;
-}
-#endif
-
 #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
 int omap3_pm_init(void);
 #else
@@ -90,12 +78,6 @@ static inline int amx3_common_pm_init(void)
 }
 #endif
 
-extern void omap2_init_common_infrastructure(void);
-
-extern void omap_init_time(void);
-extern void omap3_secure_sync32k_timer_init(void);
-extern void omap3_gptimer_timer_init(void);
-extern void omap4_local_timer_init(void);
 #ifdef CONFIG_CACHE_L2X0
 int omap_l2_cache_init(void);
 #define OMAP_L2C_AUX_CTRL	(L2C_AUX_CTRL_SHARED_OVERRIDE | \
@@ -123,26 +105,20 @@ static inline void omap5_realtime_timer_init(void)
 void omap2420_init_early(void);
 void omap2430_init_early(void);
 void omap3430_init_early(void);
-void omap35xx_init_early(void);
 void omap3630_init_early(void);
-void omap3_init_early(void);	/* Do not use this one */
 void am33xx_init_early(void);
 void am35xx_init_early(void);
 void ti814x_init_early(void);
 void ti816x_init_early(void);
-void am33xx_init_early(void);
 void am43xx_init_early(void);
 void am43xx_init_late(void);
 void omap4430_init_early(void);
 void omap5_init_early(void);
 void omap3_init_late(void);
 void omap4430_init_late(void);
-void omap2420_init_late(void);
-void omap2430_init_late(void);
 void ti81xx_init_late(void);
 void am33xx_init_late(void);
 void omap5_init_late(void);
-int omap2_common_pm_late_init(void);
 void dra7xx_init_early(void);
 void dra7xx_init_late(void);
 
@@ -236,11 +212,6 @@ void __init ti81xx_map_io(void);
 	}							\
 })
 
-extern struct device *omap2_get_mpuss_device(void);
-extern struct device *omap2_get_iva_device(void);
-extern struct device *omap2_get_l3_device(void);
-extern struct device *omap4_get_dsp_device(void);
-
 void omap_gic_of_init(void);
 
 #ifdef CONFIG_CACHE_L2X0
@@ -267,7 +238,7 @@ extern void omap4_sar_ram_init(void);
 extern void __iomem *omap4_get_sar_ram_base(void);
 extern void omap4_mpuss_early_init(void);
 extern void omap_do_wfi(void);
-
+extern void omap_interconnect_sync(void);
 
 #ifdef CONFIG_SMP
 /* Needed for secondary core boot */
@@ -285,11 +256,13 @@ extern u32 omap4_get_cpu1_ns_pa_addr(void);
 
 #if defined(CONFIG_SMP) && defined(CONFIG_PM)
 extern int omap4_mpuss_init(void);
-extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state);
+extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state,
+				bool rcuidle);
 extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state);
 #else
 static inline int omap4_enter_lowpower(unsigned int cpu,
-					unsigned int power_state)
+					unsigned int power_state,
+					bool rcuidle)
 {
 	cpu_do_idle();
 	return 0;
@@ -343,15 +316,6 @@ static inline void omap5_secondary_hyp_startup(void)
 }
 #endif
 
-#ifdef CONFIG_SOC_DRA7XX
-extern int dra7xx_pciess_reset(struct omap_hwmod *oh);
-#else
-static inline int dra7xx_pciess_reset(struct omap_hwmod *oh)
-{
-	return 0;
-}
-#endif
-
 struct omap_system_dma_plat_info;
 
 void pdata_quirks_init(const struct of_device_id *);
@@ -370,5 +334,16 @@ extern int omap_dss_reset(struct omap_hwmod *);
 /* SoC specific clock initializer */
 int omap_clk_init(void);
 
+#if IS_ENABLED(CONFIG_OMAP_IOMMU)
+int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
+				    u8 *pwrst);
+#else
+static inline int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev,
+						  bool request, u8 *pwrst)
+{
+	return 0;
+}
+#endif
+
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 73338cf80d76..79860b23030d 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -136,11 +136,6 @@ struct omap3_control_regs {
 static struct omap3_control_regs control_context;
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
 
-void __init omap2_set_globals_control(void __iomem *ctrl)
-{
-	omap2_ctrl_base = ctrl;
-}
-
 u8 omap_ctrl_readb(u16 offset)
 {
 	u32 val;
@@ -231,68 +226,7 @@ void omap3_ctrl_write_boot_mode(u8 bootmode)
 
 #endif
 
-/**
- * omap_ctrl_write_dsp_boot_addr - set boot address for a remote processor
- * @bootaddr: physical address of the boot loader
- *
- * Set boot address for the boot loader of a supported processor
- * when a power ON sequence occurs.
- */
-void omap_ctrl_write_dsp_boot_addr(u32 bootaddr)
-{
-	u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR :
-		     cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR :
-		     cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
-		     soc_is_omap54xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
-		     0;
-
-	if (!offset) {
-		pr_err("%s: unsupported omap type\n", __func__);
-		return;
-	}
-
-	omap_ctrl_writel(bootaddr, offset);
-}
-
-/**
- * omap_ctrl_write_dsp_boot_mode - set boot mode for a remote processor
- * @bootmode: 8-bit value to pass to some boot code
- *
- * Sets boot mode for the boot loader of a supported processor
- * when a power ON sequence occurs.
- */
-void omap_ctrl_write_dsp_boot_mode(u8 bootmode)
-{
-	u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTMOD :
-		     cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTMOD :
-		     0;
-
-	if (!offset) {
-		pr_err("%s: unsupported omap type\n", __func__);
-		return;
-	}
-
-	omap_ctrl_writel(bootmode, offset);
-}
-
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
-/*
- * Clears the scratchpad contents in case of cold boot-
- * called during bootup
- */
-void omap3_clear_scratchpad_contents(void)
-{
-	u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
-	void __iomem *v_addr;
-	u32 offset = 0;
-
-	v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
-	if (omap3xxx_prm_clear_global_cold_reset()) {
-		for ( ; offset <= max_offset; offset += 0x4)
-			writel_relaxed(0x0, (v_addr + offset));
-	}
-}
-
 /* Populate the scratchpad structure with restore structure */
 void omap3_save_scratchpad_contents(void)
 {
@@ -774,8 +708,10 @@ int __init omap2_control_base_init(void)
 		data = (struct control_init_data *)match->data;
 
 		mem = of_iomap(np, 0);
-		if (!mem)
+		if (!mem) {
+			of_node_put(np);
 			return -ENOMEM;
+		}
 
 		if (data->index == TI_CLKM_CTRL) {
 			omap2_ctrl_base = mem;
@@ -815,22 +751,24 @@ int __init omap_control_init(void)
 		if (scm_conf) {
 			syscon = syscon_node_to_regmap(scm_conf);
 
-			if (IS_ERR(syscon))
-				return PTR_ERR(syscon);
+			if (IS_ERR(syscon)) {
+				ret = PTR_ERR(syscon);
+				goto of_node_put;
+			}
 
 			if (of_get_child_by_name(scm_conf, "clocks")) {
 				ret = omap2_clk_provider_init(scm_conf,
 							      data->index,
 							      syscon, NULL);
 				if (ret)
-					return ret;
+					goto of_node_put;
 			}
 		} else {
 			/* No scm_conf found, direct access */
 			ret = omap2_clk_provider_init(np, data->index, NULL,
 						      data->mem);
 			if (ret)
-				return ret;
+				goto of_node_put;
 		}
 	}
 
@@ -841,16 +779,9 @@ int __init omap_control_init(void)
 	}
 
 	return 0;
-}
 
-/**
- * omap3_control_legacy_iomap_init - legacy iomap init for clock providers
- *
- * Legacy iomap init for clock provider. Needed only by legacy boot mode,
- * where the base addresses are not parsed from DT, but still required
- * by the clock driver to be setup properly.
- */
-void __init omap3_control_legacy_iomap_init(void)
-{
-	omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap2_ctrl_base);
+of_node_put:
+	of_node_put(np);
+	return ret;
+
 }
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index eceb4b09adb2..7e7440533bf9 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -512,8 +512,6 @@ extern void omap_ctrl_writeb(u8 val, u16 offset);
 extern void omap_ctrl_writew(u16 val, u16 offset);
 extern void omap_ctrl_writel(u32 val, u16 offset);
 
-extern void omap3_save_scratchpad_contents(void);
-extern void omap3_clear_scratchpad_contents(void);
 extern void omap3_restore(void);
 extern void omap3_restore_es3(void);
 extern void omap3_restore_3630(void);
@@ -521,15 +519,11 @@ extern u32 omap3_arm_context[128];
 extern void omap3_control_save_context(void);
 extern void omap3_control_restore_context(void);
 extern void omap3_ctrl_write_boot_mode(u8 bootmode);
-extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr);
-extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
 void omap3_ctrl_init(void);
 int omap2_control_base_init(void);
 int omap_control_init(void);
-void omap2_set_globals_control(void __iomem *ctrl);
-void __init omap3_control_legacy_iomap_init(void);
 #else
 #define omap_ctrl_readb(x)		0
 #define omap_ctrl_readw(x)		0
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 090a8aafb25e..2ab5dcbfb7f6 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -133,7 +133,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
 	}
 
 	/* Execute ARM wfi */
-	omap_sram_idle();
+	omap_sram_idle(true);
 
 	/*
 	 * Call idle CPU PM enter notifier chain to restore
@@ -265,6 +265,7 @@ static struct cpuidle_driver omap3_idle_driver = {
 	.owner            = THIS_MODULE,
 	.states = {
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 2 + 2,
 			.target_residency = 5,
@@ -272,6 +273,7 @@ static struct cpuidle_driver omap3_idle_driver = {
 			.desc		  = "MPU ON + CORE ON",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 10 + 10,
 			.target_residency = 30,
@@ -279,6 +281,7 @@ static struct cpuidle_driver omap3_idle_driver = {
 			.desc		  = "MPU ON + CORE ON",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 50 + 50,
 			.target_residency = 300,
@@ -286,6 +289,7 @@ static struct cpuidle_driver omap3_idle_driver = {
 			.desc		  = "MPU RET + CORE ON",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 1500 + 1800,
 			.target_residency = 4000,
@@ -293,6 +297,7 @@ static struct cpuidle_driver omap3_idle_driver = {
 			.desc		  = "MPU OFF + CORE ON",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 2500 + 7500,
 			.target_residency = 12000,
@@ -300,6 +305,7 @@ static struct cpuidle_driver omap3_idle_driver = {
 			.desc		  = "MPU RET + CORE RET",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 3000 + 8500,
 			.target_residency = 15000,
@@ -307,6 +313,7 @@ static struct cpuidle_driver omap3_idle_driver = {
 			.desc		  = "MPU OFF + CORE RET",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 10000 + 30000,
 			.target_residency = 30000,
@@ -328,6 +335,7 @@ static struct cpuidle_driver omap3430_idle_driver = {
 	.owner            = THIS_MODULE,
 	.states = {
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 110 + 162,
 			.target_residency = 5,
@@ -335,6 +343,7 @@ static struct cpuidle_driver omap3430_idle_driver = {
 			.desc		  = "MPU ON + CORE ON",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 106 + 180,
 			.target_residency = 309,
@@ -342,6 +351,7 @@ static struct cpuidle_driver omap3430_idle_driver = {
 			.desc		  = "MPU ON + CORE ON",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 107 + 410,
 			.target_residency = 46057,
@@ -349,6 +359,7 @@ static struct cpuidle_driver omap3430_idle_driver = {
 			.desc		  = "MPU RET + CORE ON",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 121 + 3374,
 			.target_residency = 46057,
@@ -356,6 +367,7 @@ static struct cpuidle_driver omap3430_idle_driver = {
 			.desc		  = "MPU OFF + CORE ON",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 855 + 1146,
 			.target_residency = 46057,
@@ -363,6 +375,7 @@ static struct cpuidle_driver omap3430_idle_driver = {
 			.desc		  = "MPU RET + CORE RET",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 7580 + 4134,
 			.target_residency = 484329,
@@ -370,6 +383,7 @@ static struct cpuidle_driver omap3430_idle_driver = {
 			.desc		  = "MPU OFF + CORE RET",
 		},
 		{
+			.flags		  = CPUIDLE_FLAG_RCU_IDLE,
 			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 7505 + 15274,
 			.target_residency = 484329,
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index de37027ad758..df106524d695 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -105,7 +105,7 @@ static int omap_enter_idle_smp(struct cpuidle_device *dev,
 	}
 	raw_spin_unlock_irqrestore(&mpu_lock, flag);
 
-	omap4_enter_lowpower(dev->cpu, cx->cpu_state);
+	omap4_enter_lowpower(dev->cpu, cx->cpu_state, true);
 
 	raw_spin_lock_irqsave(&mpu_lock, flag);
 	if (cx->mpu_state_vote == num_online_cpus())
@@ -151,10 +151,10 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 				 (cx->mpu_logic_state == PWRDM_POWER_OFF);
 
 	/* Enter broadcast mode for periodic timers */
-	RCU_NONIDLE(tick_broadcast_enable());
+	tick_broadcast_enable();
 
 	/* Enter broadcast mode for one-shot timers */
-	RCU_NONIDLE(tick_broadcast_enter());
+	tick_broadcast_enter();
 
 	/*
 	 * Call idle CPU PM enter notifier chain so that
@@ -166,7 +166,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 
 	if (dev->cpu == 0) {
 		pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
-		RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state));
+		omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
 
 		/*
 		 * Call idle CPU cluster PM enter notifier chain
@@ -178,13 +178,13 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 				index = 0;
 				cx = state_ptr + index;
 				pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
-				RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state));
+				omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
 				mpuss_can_lose_context = 0;
 			}
 		}
 	}
 
-	omap4_enter_lowpower(dev->cpu, cx->cpu_state);
+	omap4_enter_lowpower(dev->cpu, cx->cpu_state, true);
 	cpu_done[dev->cpu] = true;
 
 	/* Wakeup CPU1 only if it is not offlined */
@@ -194,9 +194,9 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 		    mpuss_can_lose_context)
 			gic_dist_disable();
 
-		RCU_NONIDLE(clkdm_deny_idle(cpu_clkdm[1]));
-		RCU_NONIDLE(omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON));
-		RCU_NONIDLE(clkdm_allow_idle(cpu_clkdm[1]));
+		clkdm_deny_idle(cpu_clkdm[1]);
+		omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON);
+		clkdm_allow_idle(cpu_clkdm[1]);
 
 		if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD) &&
 		    mpuss_can_lose_context) {
@@ -222,7 +222,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	cpu_pm_exit();
 
 cpu_pm_out:
-	RCU_NONIDLE(tick_broadcast_exit());
+	tick_broadcast_exit();
 
 fail:
 	cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
@@ -247,7 +247,8 @@ static struct cpuidle_driver omap4_idle_driver = {
 			/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
 			.exit_latency = 328 + 440,
 			.target_residency = 960,
-			.flags = CPUIDLE_FLAG_COUPLED,
+			.flags = CPUIDLE_FLAG_COUPLED |
+				 CPUIDLE_FLAG_RCU_IDLE,
 			.enter = omap_enter_idle_coupled,
 			.name = "C2",
 			.desc = "CPUx OFF, MPUSS CSWR",
@@ -256,7 +257,8 @@ static struct cpuidle_driver omap4_idle_driver = {
 			/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
 			.exit_latency = 460 + 518,
 			.target_residency = 1100,
-			.flags = CPUIDLE_FLAG_COUPLED,
+			.flags = CPUIDLE_FLAG_COUPLED |
+				 CPUIDLE_FLAG_RCU_IDLE,
 			.enter = omap_enter_idle_coupled,
 			.name = "C3",
 			.desc = "CPUx OFF, MPUSS OSWR",
@@ -282,7 +284,8 @@ static struct cpuidle_driver omap5_idle_driver = {
 			/* C2 - CPU0 RET + CPU1 RET + MPU CSWR */
 			.exit_latency = 48 + 60,
 			.target_residency = 100,
-			.flags = CPUIDLE_FLAG_TIMER_STOP,
+			.flags = CPUIDLE_FLAG_TIMER_STOP |
+				 CPUIDLE_FLAG_RCU_IDLE,
 			.enter = omap_enter_idle_smp,
 			.name = "C2",
 			.desc = "CPUx CSWR, MPUSS CSWR",
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 5a2e198e7db1..8e6d4116d49c 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -14,7 +14,6 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/of.h>
-#include <linux/pinctrl/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 6daaa645ae5d..dbec3bb9fbf4 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -1,18 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * OMAP2plus display device setup / initialization.
  *
  * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
  *	Senthilvadivu Guruswamy
  *	Sumit Semwal
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/string.h>
@@ -211,6 +203,7 @@ static int __init omapdss_init_fbdev(void)
 	node = of_find_node_by_name(NULL, "omap4_padconf_global");
 	if (node)
 		omap4_dsi_mux_syscon = syscon_node_to_regmap(node);
+	of_node_put(node);
 
 	return 0;
 }
@@ -259,13 +252,15 @@ static int __init omapdss_init_of(void)
 
 	if (!pdev) {
 		pr_err("Unable to find DSS platform device\n");
+		of_node_put(node);
 		return -ENODEV;
 	}
 
 	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	put_device(&pdev->dev);
+	of_node_put(node);
 	if (r) {
 		pr_err("Unable to populate DSS submodule devices\n");
-		put_device(&pdev->dev);
 		return r;
 	}
 
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index dfc9b21ff19b..830cd4e7eb44 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -30,6 +30,7 @@
 #include <linux/omap-dma.h>
 
 #include "soc.h"
+#include "common.h"
 
 static const struct omap_dma_reg reg_map[] = {
 	[REVISION]	= { 0x0000, 0x00, OMAP_DMA_REG_32BIT },
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 59755b5a1ad7..98999aa8cc0c 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -117,7 +117,7 @@ static struct omap_id omap_ids[] __initdata = {
 static void __iomem *tap_base;
 static u16 tap_prod_id;
 
-void omap_get_die_id(struct omap_die_id *odi)
+static void omap_get_die_id(struct omap_die_id *odi)
 {
 	if (soc_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
 		odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
diff --git a/arch/arm/mach-omap2/id.h b/arch/arm/mach-omap2/id.h
index d1735f4497e3..ded7392f0526 100644
--- a/arch/arm/mach-omap2/id.h
+++ b/arch/arm/mach-omap2/id.h
@@ -14,6 +14,4 @@ struct omap_die_id {
 	u32 id_3;
 };
 
-void omap_get_die_id(struct omap_die_id *odi);
-
 #endif
diff --git a/arch/arm/mach-omap2/include/mach/hardware.h b/arch/arm/mach-omap2/include/mach/hardware.h
deleted file mode 100644
index 54492dbf6973..000000000000
--- a/arch/arm/mach-omap2/include/mach/hardware.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/hardware.h
- */
diff --git a/arch/arm/mach-omap2/include/mach/irqs.h b/arch/arm/mach-omap2/include/mach/irqs.h
deleted file mode 100644
index ba5282cafa42..000000000000
--- a/arch/arm/mach-omap2/include/mach/irqs.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/irqs.h
- */
diff --git a/arch/arm/mach-omap2/include/mach/serial.h b/arch/arm/mach-omap2/include/mach/serial.h
deleted file mode 100644
index 7ca1fcff453b..000000000000
--- a/arch/arm/mach-omap2/include/mach/serial.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* OMAP2 serial ports */
-#define OMAP2_UART1_BASE	0x4806a000
-#define OMAP2_UART2_BASE	0x4806c000
-#define OMAP2_UART3_BASE	0x4806e000
-
-/* OMAP3 serial ports */
-#define OMAP3_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP3_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP3_UART3_BASE	0x49020000
-#define OMAP3_UART4_BASE	0x49042000	/* Only on 36xx */
-#define OMAP3_UART4_AM35XX_BASE	0x4809E000	/* Only on AM35xx */
-
-/* OMAP4 serial ports */
-#define OMAP4_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP4_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP4_UART3_BASE	0x48020000
-#define OMAP4_UART4_BASE	0x4806e000
-
-/* TI81XX serial ports */
-#define TI81XX_UART1_BASE	0x48020000
-#define TI81XX_UART2_BASE	0x48022000
-#define TI81XX_UART3_BASE	0x48024000
-
-/* AM3505/3517 UART4 */
-#define AM35XX_UART4_BASE	0x4809E000	/* Only on AM3505/3517 */
-
-/* AM33XX serial port */
-#define AM33XX_UART1_BASE	0x44E09000
-
-/* OMAP5 serial ports */
-#define OMAP5_UART1_BASE	OMAP2_UART1_BASE
-#define OMAP5_UART2_BASE	OMAP2_UART2_BASE
-#define OMAP5_UART3_BASE	OMAP4_UART3_BASE
-#define OMAP5_UART4_BASE	OMAP4_UART4_BASE
-#define OMAP5_UART5_BASE	0x48066000
-#define OMAP5_UART6_BASE	0x48068000
-
-/* External port on Zoom2/3 */
-#define ZOOM_UART_BASE		0x10000000
-#define ZOOM_UART_VIRT		0xfa400000
-
-#define OMAP_PORT_SHIFT		2
-#define ZOOM_PORT_SHIFT		1
-
-#define OMAP24XX_BASE_BAUD	(48000000/16)
-
-#ifndef __ASSEMBLER__
-
-struct omap_board_data;
-struct omap_uart_port_info;
-
-extern void omap_serial_init(void);
-extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
-extern void omap_serial_init_port(struct omap_board_data *bdata,
-		struct omap_uart_port_info *platform_data);
-#endif
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 060ba6957b7c..14ec3f78000b 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -32,11 +32,8 @@
 #include "clockdomain.h"
 #include "common.h"
 #include "clock.h"
-#include "clock2xxx.h"
-#include "clock3xxx.h"
 #include "sdrc.h"
 #include "control.h"
-#include "serial.h"
 #include "sram.h"
 #include "cm2xxx.h"
 #include "cm3xxx.h"
@@ -402,6 +399,7 @@ static int __init _omap2_init_reprogram_sdrc(void)
 	return v;
 }
 
+#ifdef CONFIG_OMAP_HWMOD
 static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
 {
 	return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
@@ -414,6 +412,11 @@ static void __init __maybe_unused omap_hwmod_init_postsetup(void)
 	/* Set the default postsetup state for all hwmods */
 	omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state);
 }
+#else
+static inline void omap_hwmod_init_postsetup(void)
+{
+}
+#endif
 
 #ifdef CONFIG_SOC_OMAP2420
 void __init omap2420_init_early(void)
@@ -432,11 +435,6 @@ void __init omap2420_init_early(void)
 	omap_clk_soc_init = omap2420_dt_clk_init;
 	rate_table = omap2420_rate_table;
 }
-
-void __init omap2420_init_late(void)
-{
-	omap_pm_soc_init = omap2_pm_init;
-}
 #endif
 
 #ifdef CONFIG_SOC_OMAP2430
@@ -456,11 +454,6 @@ void __init omap2430_init_early(void)
 	omap_clk_soc_init = omap2430_dt_clk_init;
 	rate_table = omap2430_rate_table;
 }
-
-void __init omap2430_init_late(void)
-{
-	omap_pm_soc_init = omap2_pm_init;
-}
 #endif
 
 /*
@@ -468,7 +461,7 @@ void __init omap2430_init_late(void)
  * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
  */
 #ifdef CONFIG_ARCH_OMAP3
-void __init omap3_init_early(void)
+static void __init omap3_init_early(void)
 {
 	omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000));
 	omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
@@ -491,12 +484,6 @@ void __init omap3430_init_early(void)
 	omap_clk_soc_init = omap3430_dt_clk_init;
 }
 
-void __init omap35xx_init_early(void)
-{
-	omap3_init_early();
-	omap_clk_soc_init = omap3430_dt_clk_init;
-}
-
 void __init omap3630_init_early(void)
 {
 	omap3_init_early();
@@ -615,8 +602,6 @@ void __init omap4430_init_early(void)
 	omap44xx_voltagedomains_init();
 	omap44xx_powerdomains_init();
 	omap44xx_clockdomains_init();
-	omap44xx_hwmod_init();
-	omap_hwmod_init_postsetup();
 	omap_l2_cache_init();
 	omap_clk_soc_init = omap4xxx_dt_clk_init;
 	omap_secure_init();
@@ -643,8 +628,6 @@ void __init omap5_init_early(void)
 	omap54xx_voltagedomains_init();
 	omap54xx_powerdomains_init();
 	omap54xx_clockdomains_init();
-	omap54xx_hwmod_init();
-	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = omap5xxx_dt_clk_init;
 	omap_secure_init();
 }
@@ -667,8 +650,6 @@ void __init dra7xx_init_early(void)
 	dra7xxx_check_revision();
 	dra7xx_powerdomains_init();
 	dra7xx_clockdomains_init();
-	dra7xx_hwmod_init();
-	omap_hwmod_init_postsetup();
 	omap_clk_soc_init = dra7xx_dt_clk_init;
 	omap_secure_init();
 }
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index 93c20bbd7b7e..9c8a85198e16 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -13,6 +13,7 @@
 
 #include "clockdomain.h"
 #include "powerdomain.h"
+#include "common.h"
 
 struct pwrdm_link {
 	struct device *dev;
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 9fba98c2313a..7ad74db951f6 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -33,6 +33,7 @@
  * and first to wake-up when MPUSS low power states are excercised
  */
 
+#include <linux/cpuidle.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/errno.h>
@@ -214,6 +215,7 @@ static void __init save_l2x0_context(void)
  * of OMAP4 MPUSS subsystem
  * @cpu : CPU ID
  * @power_state: Low power state.
+ * @rcuidle: RCU needs to be idled
  *
  * MPUSS states for the context save:
  * save_state =
@@ -222,7 +224,8 @@ static void __init save_l2x0_context(void)
  *	2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR
  *	3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF
  */
-int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
+__cpuidle int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state,
+				   bool rcuidle)
 {
 	struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu);
 	unsigned int save_state = 0, cpu_logic_state = PWRDM_POWER_RET;
@@ -268,6 +271,10 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 	cpu_clear_prev_logic_pwrst(cpu);
 	pwrdm_set_next_pwrst(pm_info->pwrdm, power_state);
 	pwrdm_set_logic_retst(pm_info->pwrdm, cpu_logic_state);
+
+	if (rcuidle)
+		ct_cpuidle_enter();
+
 	set_cpu_wakeup_addr(cpu, __pa_symbol(omap_pm_ops.resume));
 	omap_pm_ops.scu_prepare(cpu, power_state);
 	l2x0_pwrst_prepare(cpu, save_state);
@@ -283,6 +290,9 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 	if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD) && cpu)
 		gic_dist_enable();
 
+	if (rcuidle)
+		ct_cpuidle_exit();
+
 	/*
 	 * Restore the CPUx power state to ON otherwise CPUx
 	 * power domain can transitions to programmed low power
diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
index f70d561f37f7..29c7350b06ab 100644
--- a/arch/arm/mach-omap2/omap-secure.c
+++ b/arch/arm/mach-omap2/omap-secure.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/arm-smccc.h>
+#include <linux/cpu_pm.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -20,6 +21,7 @@
 
 #include "common.h"
 #include "omap-secure.h"
+#include "soc.h"
 
 static phys_addr_t omap_secure_memblock_base;
 
@@ -57,8 +59,13 @@ static void __init omap_optee_init_check(void)
 u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2,
 							 u32 arg3, u32 arg4)
 {
+	static u32 buf[NR_CPUS][5];
+	u32 *param;
+	int cpu;
 	u32 ret;
-	u32 param[5];
+
+	cpu = get_cpu();
+	param = buf[cpu];
 
 	param[0] = nargs;
 	param[1] = arg1;
@@ -74,6 +81,8 @@ u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2,
 	outer_clean_range(__pa(param), __pa(param + 5));
 	ret = omap_smc2(idx, flag, __pa(param));
 
+	put_cpu();
+
 	return ret;
 }
 
@@ -109,16 +118,11 @@ int __init omap_secure_ram_reserve_memblock(void)
 	return 0;
 }
 
-phys_addr_t omap_secure_ram_mempool_base(void)
-{
-	return omap_secure_memblock_base;
-}
-
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
-u32 omap3_save_secure_ram(void __iomem *addr, int size)
+u32 omap3_save_secure_ram(void *addr, int size)
 {
+	static u32 param[5];
 	u32 ret;
-	u32 param[5];
 
 	if (size != OMAP3_SAVE_SECURE_RAM_SZ)
 		return OMAP3_SAVE_SECURE_RAM_SZ;
@@ -148,11 +152,11 @@ u32 omap3_save_secure_ram(void __iomem *addr, int size)
  * NOTE: rx51_secure_dispatcher differs from omap_secure_dispatcher because
  *       it calling omap_smc3() instead omap_smc2() and param[0] is nargs+1
  */
-u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
+static u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
 			   u32 arg1, u32 arg2, u32 arg3, u32 arg4)
 {
+	static u32 param[5];
 	u32 ret;
-	u32 param[5];
 
 	param[0] = nargs+1; /* RX-51 needs number of arguments + 1 */
 	param[1] = arg1;
@@ -213,3 +217,40 @@ void __init omap_secure_init(void)
 {
 	omap_optee_init_check();
 }
+
+/*
+ * Dummy dispatcher call after core OSWR and MPU off. Updates the ROM return
+ * address after MMU has been re-enabled after CPU1 has been woken up again.
+ * Otherwise the ROM code will attempt to use the earlier physical return
+ * address that got set with MMU off when waking up CPU1. Only used on secure
+ * devices.
+ */
+static int cpu_notifier(struct notifier_block *nb, unsigned long cmd, void *v)
+{
+	switch (cmd) {
+	case CPU_CLUSTER_PM_EXIT:
+		omap_secure_dispatcher(OMAP4_PPA_SERVICE_0,
+				       FLAG_START_CRITICAL,
+				       0, 0, 0, 0, 0);
+		break;
+	default:
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block secure_notifier_block = {
+	.notifier_call = cpu_notifier,
+};
+
+static int __init secure_pm_init(void)
+{
+	if (omap_type() == OMAP2_DEVICE_TYPE_GP || !soc_is_omap44xx())
+		return 0;
+
+	cpu_pm_register_notifier(&secure_notifier_block);
+
+	return 0;
+}
+omap_arch_initcall(secure_pm_init);
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index 4aaa95706d39..2517c4a5a0e2 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -50,6 +50,7 @@
 #define OMAP5_DRA7_MON_SET_ACR_INDEX	0x107
 
 /* Secure PPA(Primary Protected Application) APIs */
+#define OMAP4_PPA_SERVICE_0		0x21
 #define OMAP4_PPA_L2_POR_INDEX		0x23
 #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX	0x25
 
@@ -69,13 +70,10 @@ extern void omap_smccc_smc(u32 fn, u32 arg);
 extern void omap_smc1(u32 fn, u32 arg);
 extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
 extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs);
-extern phys_addr_t omap_secure_ram_mempool_base(void);
 extern int omap_secure_ram_reserve_memblock(void);
 extern u32 save_secure_ram_context(u32 args_pa);
-extern u32 omap3_save_secure_ram(void __iomem *save_regs, int size);
+extern u32 omap3_save_secure_ram(void *save_regs, int size);
 
-extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
-				  u32 arg1, u32 arg2, u32 arg3, u32 arg4);
 extern u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits);
 extern u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag);
 
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 5c3845730dbf..d9ed2a5dcd5e 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -139,7 +139,8 @@ static int __init omap4_sram_init(void)
 		pr_warn("%s:Unable to get sram pool needed to handle errata I688\n",
 			__func__);
 	else
-		sram_sync = (void *)gen_pool_alloc(sram_pool, PAGE_SIZE);
+		sram_sync = (void __iomem *)gen_pool_alloc(sram_pool, PAGE_SIZE);
+	of_node_put(np);
 
 	return 0;
 }
@@ -314,10 +315,12 @@ void __init omap_gic_of_init(void)
 
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
 	gic_dist_base_addr = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!gic_dist_base_addr);
 
 	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
 	twd_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!twd_base);
 
 skip_errata_init:
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 56d6814bec26..4afa2f08e668 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -39,6 +39,12 @@
 #include "omap_device.h"
 #include "omap_hwmod.h"
 
+static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+				struct omap_hwmod **ohs, int oh_cnt);
+static void omap_device_delete(struct omap_device *od);
+static struct dev_pm_domain omap_device_fail_pm_domain;
+static struct dev_pm_domain omap_device_pm_domain;
+
 /* Private functions */
 
 static void _add_clkdev(struct omap_device *od, const char *clk_alias,
@@ -96,9 +102,6 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias,
  * omap_device, this function adds an entry in the clkdev table of the
  * form <dev-id=dev_name, con-id=role> if it does not exist already.
  *
- * The function is called from inside omap_device_build_ss(), after
- * omap_device_register.
- *
  * This allows drivers to get a pointer to its optional clocks based on its role
  * by calling clk_get(<dev*>, <role>).
  * In the case of the main clock, a "fck" alias is used.
@@ -289,34 +292,6 @@ static int _omap_device_idle_hwmods(struct omap_device *od)
 /* Public functions for use by core code */
 
 /**
- * omap_device_get_context_loss_count - get lost context count
- * @pdev: The platform device to update.
- *
- * Using the primary hwmod, query the context loss count for this
- * device.
- *
- * Callers should consider context for this device lost any time this
- * function returns a value different than the value the caller got
- * the last time it called this function.
- *
- * If any hwmods exist for the omap_device associated with @pdev,
- * return the context loss counter for that hwmod, otherwise return
- * zero.
- */
-int omap_device_get_context_loss_count(struct platform_device *pdev)
-{
-	struct omap_device *od;
-	u32 ret = 0;
-
-	od = to_omap_device(pdev);
-
-	if (od->hwmods_cnt)
-		ret = omap_hwmod_get_context_loss_count(od->hwmods[0]);
-
-	return ret;
-}
-
-/**
  * omap_device_alloc - allocate an omap_device
  * @pdev: platform_device that will be included in this omap_device
  * @ohs: ptr to the omap_hwmod for this omap_device
@@ -327,7 +302,7 @@ int omap_device_get_context_loss_count(struct platform_device *pdev)
  *
  * Returns an struct omap_device pointer or ERR_PTR() on error;
  */
-struct omap_device *omap_device_alloc(struct platform_device *pdev,
+static struct omap_device *omap_device_alloc(struct platform_device *pdev,
 					struct omap_hwmod **ohs, int oh_cnt)
 {
 	int ret = -ENOMEM;
@@ -364,7 +339,7 @@ oda_exit1:
 	return ERR_PTR(ret);
 }
 
-void omap_device_delete(struct omap_device *od)
+static void omap_device_delete(struct omap_device *od)
 {
 	if (!od)
 		return;
@@ -456,14 +431,14 @@ static int _od_resume_noirq(struct device *dev)
 #define _od_resume_noirq NULL
 #endif
 
-struct dev_pm_domain omap_device_fail_pm_domain = {
+static struct dev_pm_domain omap_device_fail_pm_domain = {
 	.ops = {
 		SET_RUNTIME_PM_OPS(_od_fail_runtime_suspend,
 				   _od_fail_runtime_resume, NULL)
 	}
 };
 
-struct dev_pm_domain omap_device_pm_domain = {
+static struct dev_pm_domain omap_device_pm_domain = {
 	.ops = {
 		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
 				   NULL)
@@ -473,23 +448,6 @@ struct dev_pm_domain omap_device_pm_domain = {
 	}
 };
 
-/**
- * omap_device_register - register an omap_device with one omap_hwmod
- * @pdev: the platform device (omap_device) to register.
- *
- * Register the omap_device structure.  This currently just calls
- * platform_device_register() on the underlying platform_device.
- * Returns the return value of platform_device_register().
- */
-int omap_device_register(struct platform_device *pdev)
-{
-	pr_debug("omap_device: %s: registering\n", pdev->name);
-
-	dev_pm_domain_set(&pdev->dev, &omap_device_pm_domain);
-	return platform_device_add(pdev);
-}
-
-
 /* Public functions for use by device drivers through struct platform_data */
 
 /**
@@ -612,38 +570,6 @@ int omap_device_deassert_hardreset(struct platform_device *pdev,
 	return ret;
 }
 
-/**
- * omap_device_get_by_hwmod_name() - convert a hwmod name to
- * device pointer.
- * @oh_name: name of the hwmod device
- *
- * Returns back a struct device * pointer associated with a hwmod
- * device represented by a hwmod_name
- */
-struct device *omap_device_get_by_hwmod_name(const char *oh_name)
-{
-	struct omap_hwmod *oh;
-
-	if (!oh_name) {
-		WARN(1, "%s: no hwmod name!\n", __func__);
-		return ERR_PTR(-EINVAL);
-	}
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-		WARN(1, "%s: no hwmod for %s\n", __func__,
-			oh_name);
-		return ERR_PTR(-ENODEV);
-	}
-	if (!oh->od) {
-		WARN(1, "%s: no omap_device for %s\n", __func__,
-			oh_name);
-		return ERR_PTR(-ENODEV);
-	}
-
-	return &oh->od->pdev->dev;
-}
-
 static struct notifier_block platform_nb = {
 	.notifier_call = _omap_device_notifier_call,
 };
diff --git a/arch/arm/mach-omap2/omap_device.h b/arch/arm/mach-omap2/omap_device.h
index f77e76a7841a..aa8096ecb23c 100644
--- a/arch/arm/mach-omap2/omap_device.h
+++ b/arch/arm/mach-omap2/omap_device.h
@@ -25,9 +25,6 @@
 
 #include "omap_hwmod.h"
 
-extern struct dev_pm_domain omap_device_pm_domain;
-extern struct dev_pm_domain omap_device_fail_pm_domain;
-
 /* omap_device._state values */
 #define OMAP_DEVICE_STATE_UNKNOWN	0
 #define OMAP_DEVICE_STATE_ENABLED	1
@@ -66,18 +63,6 @@ struct omap_device {
 int omap_device_enable(struct platform_device *pdev);
 int omap_device_idle(struct platform_device *pdev);
 
-/* Core code interface */
-
-struct omap_device *omap_device_alloc(struct platform_device *pdev,
-				      struct omap_hwmod **ohs, int oh_cnt);
-void omap_device_delete(struct omap_device *od);
-int omap_device_register(struct platform_device *pdev);
-
-struct device *omap_device_get_by_hwmod_name(const char *oh_name);
-
-/* OMAP PM interface */
-int omap_device_get_context_loss_count(struct platform_device *pdev);
-
 /* Other */
 
 int omap_device_assert_hardreset(struct platform_device *pdev,
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 2310cd56e99b..aac4c4ee2528 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -706,9 +706,7 @@ static const struct of_device_id ti_clkctrl_match_table[] __initconst = {
 
 static int __init _setup_clkctrl_provider(struct device_node *np)
 {
-	const __be32 *addrp;
 	struct clkctrl_provider *provider;
-	u64 size;
 	int i;
 
 	provider = memblock_alloc(sizeof(*provider), SMP_CACHE_BYTES);
@@ -717,8 +715,7 @@ static int __init _setup_clkctrl_provider(struct device_node *np)
 
 	provider->node = np;
 
-	provider->num_addrs =
-		of_property_count_elems_of_size(np, "reg", sizeof(u32)) / 2;
+	provider->num_addrs = of_address_count(np);
 
 	provider->addr =
 		memblock_alloc(sizeof(void *) * provider->num_addrs,
@@ -733,11 +730,11 @@ static int __init _setup_clkctrl_provider(struct device_node *np)
 		return -ENOMEM;
 
 	for (i = 0; i < provider->num_addrs; i++) {
-		addrp = of_get_address(np, i, &size, NULL);
-		provider->addr[i] = (u32)of_translate_address(np, addrp);
-		provider->size[i] = size;
-		pr_debug("%s: %pOF: %x...%x\n", __func__, np, provider->addr[i],
-			 provider->addr[i] + provider->size[i]);
+		struct resource res;
+		of_address_to_resource(np, i, &res);
+		provider->addr[i] = res.start;
+		provider->size[i] = resource_size(&res);
+		pr_debug("%s: %pOF: %pR\n", __func__, np, &res);
 	}
 
 	list_add(&provider->link, &clkctrl_providers);
@@ -752,8 +749,10 @@ static int __init _init_clkctrl_providers(void)
 
 	for_each_matching_node(np, ti_clkctrl_match_table) {
 		ret = _setup_clkctrl_provider(np);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			break;
+		}
 	}
 
 	return ret;
@@ -812,7 +811,7 @@ static struct clk *_lookup_clkctrl_clk(struct omap_hwmod *oh)
 }
 
 /**
- * _init_main_clk - get a struct clk * for the the hwmod's main functional clk
+ * _init_main_clk - get a struct clk * for the hwmod's main functional clk
  * @oh: struct omap_hwmod *
  *
  * Called from _init_clocks().  Populates the @oh _clk (main
@@ -862,7 +861,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
 }
 
 /**
- * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the hwmod's interface clks
  * @oh: struct omap_hwmod *
  *
  * Called from _init_clocks().  Populates the @oh OCP slave interface
@@ -901,7 +900,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
 }
 
 /**
- * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
+ * _init_opt_clk - get a struct clk * for the hwmod's optional clocks
  * @oh: struct omap_hwmod *
  *
  * Called from _init_clocks().  Populates the @oh omap_hwmod_opt_clk
@@ -2137,6 +2136,7 @@ static int of_dev_hwmod_lookup(struct device_node *np,
 		if (res == 0) {
 			*found = fc;
 			*index = i;
+			of_node_put(np0);
 			return 0;
 		}
 	}
@@ -2319,11 +2319,11 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
 static void __init parse_module_flags(struct omap_hwmod *oh,
 				      struct device_node *np)
 {
-	if (of_find_property(np, "ti,no-reset-on-init", NULL))
+	if (of_property_read_bool(np, "ti,no-reset-on-init"))
 		oh->flags |= HWMOD_INIT_NO_RESET;
-	if (of_find_property(np, "ti,no-idle-on-init", NULL))
+	if (of_property_read_bool(np, "ti,no-idle-on-init"))
 		oh->flags |= HWMOD_INIT_NO_IDLE;
-	if (of_find_property(np, "ti,no-idle", NULL))
+	if (of_property_read_bool(np, "ti,no-idle"))
 		oh->flags |= HWMOD_NO_IDLE;
 }
 
@@ -3051,6 +3051,8 @@ int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois)
 	return 0;
 }
 
+static int __init omap_hwmod_setup_one(const char *oh_name);
+
 /**
  * _ensure_mpu_hwmod_is_setup - ensure the MPU SS hwmod is init'ed and set up
  * @oh: pointer to the hwmod currently being set up (usually not the MPU)
@@ -3081,7 +3083,7 @@ static void __init _ensure_mpu_hwmod_is_setup(struct omap_hwmod *oh)
  * registered omap_hwmod.  Also calls _setup() on each hwmod.  Returns
  * -EINVAL upon error or 0 upon success.
  */
-int __init omap_hwmod_setup_one(const char *oh_name)
+static int __init omap_hwmod_setup_one(const char *oh_name)
 {
 	struct omap_hwmod *oh;
 
@@ -3452,7 +3454,7 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
 	}
 
 	if (list_empty(&oh->slave_ports)) {
-		oi = kcalloc(1, sizeof(*oi), GFP_KERNEL);
+		oi = kzalloc(sizeof(*oi), GFP_KERNEL);
 		if (!oi)
 			goto out_free_class;
 
@@ -3495,10 +3497,6 @@ static const struct omap_hwmod_reset omap24xx_reset_quirks[] = {
 	{ .match = "msdi", .len = 4, .reset = omap_msdi_reset, },
 };
 
-static const struct omap_hwmod_reset dra7_reset_quirks[] = {
-	{ .match = "pcie", .len = 4, .reset = dra7xx_pciess_reset, },
-};
-
 static const struct omap_hwmod_reset omap_reset_quirks[] = {
 	{ .match = "dss_core", .len = 8, .reset = omap_dss_reset, },
 	{ .match = "hdq1w", .len = 5, .reset = omap_hdq1w_reset, },
@@ -3534,10 +3532,6 @@ omap_hwmod_init_reset_quirks(struct device *dev, struct omap_hwmod *oh,
 					    omap24xx_reset_quirks,
 					    ARRAY_SIZE(omap24xx_reset_quirks));
 
-	if (soc_is_dra7xx())
-		omap_hwmod_init_reset_quirk(dev, oh, data, dra7_reset_quirks,
-					    ARRAY_SIZE(dra7_reset_quirks));
-
 	omap_hwmod_init_reset_quirk(dev, oh, data, omap_reset_quirks,
 				    ARRAY_SIZE(omap_reset_quirks));
 }
@@ -3621,6 +3615,8 @@ int omap_hwmod_init_module(struct device *dev,
 		oh->flags |= HWMOD_SWSUP_SIDLE_ACT;
 	if (data->cfg->quirks & SYSC_QUIRK_SWSUP_MSTANDBY)
 		oh->flags |= HWMOD_SWSUP_MSTANDBY;
+	if (data->cfg->quirks & SYSC_QUIRK_CLKDM_NOAUTO)
+		oh->flags |= HWMOD_CLKDM_NOAUTO;
 
 	error = omap_hwmod_check_module(dev, oh, data, sysc_fields,
 					rev_offs, sysc_offs, syss_offs,
@@ -3767,47 +3763,6 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh)
  */
 
 /**
- * omap_hwmod_get_pwrdm - return pointer to this module's main powerdomain
- * @oh: struct omap_hwmod *
- *
- * Return the powerdomain pointer associated with the OMAP module
- * @oh's main clock.  If @oh does not have a main clk, return the
- * powerdomain associated with the interface clock associated with the
- * module's MPU port. (XXX Perhaps this should use the SDMA port
- * instead?)  Returns NULL on error, or a struct powerdomain * on
- * success.
- */
-struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
-{
-	struct clk *c;
-	struct omap_hwmod_ocp_if *oi;
-	struct clockdomain *clkdm;
-	struct clk_hw_omap *clk;
-
-	if (!oh)
-		return NULL;
-
-	if (oh->clkdm)
-		return oh->clkdm->pwrdm.ptr;
-
-	if (oh->_clk) {
-		c = oh->_clk;
-	} else {
-		oi = _find_mpu_rt_port(oh);
-		if (!oi)
-			return NULL;
-		c = oi->_clk;
-	}
-
-	clk = to_clk_hw_omap(__clk_get_hw(c));
-	clkdm = clk->clkdm;
-	if (!clkdm)
-		return NULL;
-
-	return clkdm->pwrdm.ptr;
-}
-
-/**
  * omap_hwmod_get_mpu_rt_va - return the module's base address (for the MPU)
  * @oh: struct omap_hwmod *
  *
@@ -3973,32 +3928,6 @@ ohsps_unlock:
 }
 
 /**
- * omap_hwmod_get_context_loss_count - get lost context count
- * @oh: struct omap_hwmod *
- *
- * Returns the context loss count of associated @oh
- * upon success, or zero if no context loss data is available.
- *
- * On OMAP4, this queries the per-hwmod context loss register,
- * assuming one exists.  If not, or on OMAP2/3, this queries the
- * enclosing powerdomain context loss count.
- */
-int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
-{
-	struct powerdomain *pwrdm;
-	int ret = 0;
-
-	if (soc_ops.get_context_lost)
-		return soc_ops.get_context_lost(oh);
-
-	pwrdm = omap_hwmod_get_pwrdm(oh);
-	if (pwrdm)
-		ret = pwrdm_get_context_loss_count(pwrdm);
-
-	return ret;
-}
-
-/**
  * omap_hwmod_init - initialize the hwmod code
  *
  * Sets up some function pointers needed by the hwmod code to operate on the
@@ -4049,18 +3978,3 @@ void __init omap_hwmod_init(void)
 
 	inited = true;
 }
-
-/**
- * omap_hwmod_get_main_clk - get pointer to main clock name
- * @oh: struct omap_hwmod *
- *
- * Returns the main clock name assocated with @oh upon success,
- * or NULL if @oh is NULL.
- */
-const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh)
-{
-	if (!oh)
-		return NULL;
-
-	return oh->main_clk;
-}
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index eebf2fdf434c..dcab7a01c10e 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -607,13 +607,14 @@ struct omap_hwmod {
 	struct omap_hwmod		*parent_hwmod;
 };
 
+#ifdef CONFIG_OMAP_HWMOD
+
 struct device_node;
 
 struct omap_hwmod *omap_hwmod_lookup(const char *name);
 int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
 			void *data);
 
-int __init omap_hwmod_setup_one(const char *name);
 int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
 				  struct device_node *np,
 				  struct resource *res);
@@ -636,12 +637,6 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
 u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
 int omap_hwmod_softreset(struct omap_hwmod *oh);
 
-int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags);
-int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
-int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
-				   const char *name, struct resource *res);
-
-struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
 void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
 
 int omap_hwmod_for_each_by_class(const char *classname,
@@ -650,18 +645,19 @@ int omap_hwmod_for_each_by_class(const char *classname,
 				 void *user);
 
 int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
-int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
 
 extern void __init omap_hwmod_init(void);
 
-const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
-
-/*
- *
- */
+#else	/* CONFIG_OMAP_HWMOD */
 
-void omap_hwmod_rtc_unlock(struct omap_hwmod *oh);
-void omap_hwmod_rtc_lock(struct omap_hwmod *oh);
+static inline int
+omap_hwmod_for_each_by_class(const char *classname,
+			     int (*fn)(struct omap_hwmod *oh, void *user),
+			     void *user)
+{
+	return 0;
+}
+#endif	/* CONFIG_OMAP_HWMOD */
 
 /*
  * Chip variant-specific hwmod init routines - XXX should be converted
@@ -670,13 +666,8 @@ void omap_hwmod_rtc_lock(struct omap_hwmod *oh);
 extern int omap2420_hwmod_init(void);
 extern int omap2430_hwmod_init(void);
 extern int omap3xxx_hwmod_init(void);
-extern int omap44xx_hwmod_init(void);
-extern int omap54xx_hwmod_init(void);
-extern int am33xx_hwmod_init(void);
 extern int dm814x_hwmod_init(void);
 extern int dm816x_hwmod_init(void);
-extern int dra7xx_hwmod_init(void);
-int am43xx_hwmod_init(void);
 
 extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 558fae4375ba..dbd9dc9f0962 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -22,7 +22,6 @@
 #include "prm-regbits-24xx.h"
 #include "i2c.h"
 #include "mmc.h"
-#include "serial.h"
 #include "wd_timer.h"
 
 /*
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index 2581b8a5f866..67f1f38909d9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -62,7 +62,7 @@ struct omap_hwmod_class iva_hwmod_class = {
 	.name = "iva",
 };
 
-struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = {
+static struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = {
 	.rev_offs	= 0x0,
 	.sysc_offs	= 0x14,
 	.syss_offs	= 0x18,
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
index 518e877bb2a1..761d34914ed9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c
@@ -13,7 +13,6 @@
 #include "omap_hwmod.h"
 #include "l3_2xxx.h"
 #include "l4_2xxx.h"
-#include "serial.h"
 
 #include "omap_hwmod_common_data.h"
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index 9156f2bfbc8d..4982e04ead53 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -30,7 +30,7 @@ static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-struct omap_hwmod_class omap2_dispc_hwmod_class = {
+static struct omap_hwmod_class omap2_dispc_hwmod_class = {
 	.name	= "dispc",
 	.sysc	= &omap2_dispc_sysc,
 };
@@ -47,7 +47,7 @@ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-struct omap_hwmod_class omap2xxx_timer_hwmod_class = {
+static struct omap_hwmod_class omap2xxx_timer_hwmod_class = {
 	.name	= "timer",
 	.sysc	= &omap2xxx_timer_sysc,
 };
@@ -67,7 +67,7 @@ static struct omap_hwmod_class_sysconfig omap2xxx_wd_timer_sysc = {
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class = {
+static struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class = {
 	.name		= "wd_timer",
 	.sysc		= &omap2xxx_wd_timer_sysc,
 	.pre_shutdown	= &omap2_wd_timer_disable,
@@ -189,12 +189,6 @@ struct omap_hwmod omap2xxx_mpu_hwmod = {
 	.main_clk	= "mpu_ck",
 };
 
-/* IVA2 */
-struct omap_hwmod omap2xxx_iva_hwmod = {
-	.name		= "iva",
-	.class		= &iva_hwmod_class,
-};
-
 /* timer3 */
 struct omap_hwmod omap2xxx_timer3_hwmod = {
 	.name		= "timer3",
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index b6c7d98a9eff..cb33f0382a90 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -27,7 +27,6 @@
 
 #include "i2c.h"
 #include "wd_timer.h"
-#include "serial.h"
 
 /*
  * OMAP3xxx hardware module integration data
@@ -1135,65 +1134,6 @@ static struct omap_hwmod omap34xx_mcspi4 = {
 	.class		= &omap34xx_mcspi_class,
 };
 
-/* usbhsotg */
-static struct omap_hwmod_class_sysconfig omap3xxx_usbhsotg_sysc = {
-	.rev_offs	= 0x0400,
-	.sysc_offs	= 0x0404,
-	.syss_offs	= 0x0408,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE|
-			  SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			  SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			  MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class usbotg_class = {
-	.name = "usbotg",
-	.sysc = &omap3xxx_usbhsotg_sysc,
-};
-
-/* usb_otg_hs */
-
-static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
-	.name		= "usb_otg_hs",
-	.main_clk	= "hsotgusb_ick",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT,
-		},
-	},
-	.class		= &usbotg_class,
-
-	/*
-	 * Erratum ID: i479  idle_req / idle_ack mechanism potentially
-	 * broken when autoidle is enabled
-	 * workaround is to disable the autoidle bit at module level.
-	 *
-	 * Enabling the device in any other MIDLEMODE setting but force-idle
-	 * causes core_pwrdm not enter idle states at least on OMAP3630.
-	 * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
-	 * signal when MIDLEMODE is set to force-idle.
-	 */
-	.flags		= HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE |
-			  HWMOD_FORCE_MSTANDBY | HWMOD_RECONFIG_IO_CHAIN,
-};
-
-/* usb_otg_hs */
-
-static struct omap_hwmod_class am35xx_usbotg_class = {
-	.name = "am35xx_usbotg",
-};
-
-static struct omap_hwmod am35xx_usbhsotg_hwmod = {
-	.name		= "am35x_otg_hs",
-	.main_clk	= "hsotgusb_fck",
-	.class		= &am35xx_usbotg_class,
-	.flags		= HWMOD_NO_IDLEST,
-};
-
 /* MMC/SD/SDIO common */
 static struct omap_hwmod_class_sysconfig omap34xx_mmc_sysc = {
 	.rev_offs	= 0x1fc,
@@ -1561,22 +1501,6 @@ static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l3_core -> usbhsotg interface */
-static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = {
-	.master		= &omap3xxx_usbhsotg_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.clk		= "core_l3_ick",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_core -> am35xx_usbhsotg interface */
-static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = {
-	.master		= &am35xx_usbhsotg_hwmod,
-	.slave		= &omap3xxx_l3_main_hwmod,
-	.clk		= "hsotgusb_ick",
-	.user		= OCP_USER_MPU,
-};
-
 /* l3_core -> sad2d interface */
 static struct omap_hwmod_ocp_if omap3xxx_sad2d__l3 = {
 	.master		= &omap3xxx_sad2d_hwmod,
@@ -1758,24 +1682,6 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = {
 	.user		= OCP_USER_MPU,
 };
 
-
-/* l4_core -> usbhsotg  */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_usbhsotg_hwmod,
-	.clk		= "l4_ick",
-	.user		= OCP_USER_MPU,
-};
-
-
-/* l4_core -> usbhsotg  */
-static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &am35xx_usbhsotg_hwmod,
-	.clk		= "hsotgusb_ick",
-	.user		= OCP_USER_MPU,
-};
-
 /* L4_WKUP -> L4_SEC interface */
 static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__l4_sec = {
 	.master = &omap3xxx_l4_wkup_hwmod,
@@ -2465,8 +2371,6 @@ static struct omap_hwmod_ocp_if *omap3430es1_hwmod_ocp_ifs[] __initdata = {
 static struct omap_hwmod_ocp_if *omap3430es2plus_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_dss__l3,
 	&omap3xxx_l4_core__dss,
-	&omap3xxx_usbhsotg__l3,
-	&omap3xxx_l4_core__usbhsotg,
 	&omap3xxx_usb_host_hs__l3_main_2,
 	&omap3xxx_l4_core__usb_host_hs,
 	&omap3xxx_l4_core__usb_tll_hs,
@@ -2509,8 +2413,6 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_core__dss,
 	&omap36xx_l4_core__sr1,
 	&omap36xx_l4_core__sr2,
-	&omap3xxx_usbhsotg__l3,
-	&omap3xxx_l4_core__usbhsotg,
 	&omap3xxx_l4_core__mailbox,
 	&omap3xxx_usb_host_hs__l3_main_2,
 	&omap3xxx_l4_core__usb_host_hs,
@@ -2528,8 +2430,6 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
 static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_dss__l3,
 	&omap3xxx_l4_core__dss,
-	&am35xx_usbhsotg__l3,
-	&am35xx_l4_core__usbhsotg,
 	&am35xx_l4_core__uart4,
 	&omap3xxx_usb_host_hs__l3_main_2,
 	&omap3xxx_l4_core__usb_host_hs,
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
deleted file mode 100644
index 6aa3b8e81a0c..000000000000
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ /dev/null
@@ -1,877 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware modules present on the OMAP44xx chips
- *
- * Copyright (C) 2009-2012 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Benoit Cousson
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- * Note that this file is currently not in sync with autogeneration scripts.
- * The above note to be removed, once it is synced up.
- */
-
-#include <linux/io.h>
-
-#include "omap_hwmod.h"
-#include "omap_hwmod_common_data.h"
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
-#include "prm44xx.h"
-#include "prm-regbits-44xx.h"
-
-/* Base offset for all OMAP4 interrupts external to MPUSS */
-#define OMAP44XX_IRQ_GIC_START	32
-
-/*
- * IP blocks
- */
-
-/*
- * 'dmm' class
- * instance(s): dmm
- */
-static struct omap_hwmod_class omap44xx_dmm_hwmod_class = {
-	.name	= "dmm",
-};
-
-/* dmm */
-static struct omap_hwmod omap44xx_dmm_hwmod = {
-	.name		= "dmm",
-	.class		= &omap44xx_dmm_hwmod_class,
-	.clkdm_name	= "l3_emif_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/*
- * 'l3' class
- * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3
- */
-static struct omap_hwmod_class omap44xx_l3_hwmod_class = {
-	.name	= "l3",
-};
-
-/* l3_instr */
-static struct omap_hwmod omap44xx_l3_instr_hwmod = {
-	.name		= "l3_instr",
-	.class		= &omap44xx_l3_hwmod_class,
-	.clkdm_name	= "l3_instr_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/* l3_main_1 */
-static struct omap_hwmod omap44xx_l3_main_1_hwmod = {
-	.name		= "l3_main_1",
-	.class		= &omap44xx_l3_hwmod_class,
-	.clkdm_name	= "l3_1_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3_1_L3_1_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* l3_main_2 */
-static struct omap_hwmod omap44xx_l3_main_2_hwmod = {
-	.name		= "l3_main_2",
-	.class		= &omap44xx_l3_hwmod_class,
-	.clkdm_name	= "l3_2_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3_2_L3_2_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* l3_main_3 */
-static struct omap_hwmod omap44xx_l3_main_3_hwmod = {
-	.name		= "l3_main_3",
-	.class		= &omap44xx_l3_hwmod_class,
-	.clkdm_name	= "l3_instr_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
- * 'l4' class
- * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup
- */
-static struct omap_hwmod_class omap44xx_l4_hwmod_class = {
-	.name	= "l4",
-};
-
-/* l4_cfg */
-static struct omap_hwmod omap44xx_l4_cfg_hwmod = {
-	.name		= "l4_cfg",
-	.class		= &omap44xx_l4_hwmod_class,
-	.clkdm_name	= "l4_cfg_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* l4_per */
-static struct omap_hwmod omap44xx_l4_per_hwmod = {
-	.name		= "l4_per",
-	.class		= &omap44xx_l4_hwmod_class,
-	.clkdm_name	= "l4_per_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L4PER_L4PER_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* l4_wkup */
-static struct omap_hwmod omap44xx_l4_wkup_hwmod = {
-	.name		= "l4_wkup",
-	.class		= &omap44xx_l4_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_WKUP_L4WKUP_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/*
- * 'mpu_bus' class
- * instance(s): mpu_private
- */
-static struct omap_hwmod_class omap44xx_mpu_bus_hwmod_class = {
-	.name	= "mpu_bus",
-};
-
-/* mpu_private */
-static struct omap_hwmod omap44xx_mpu_private_hwmod = {
-	.name		= "mpu_private",
-	.class		= &omap44xx_mpu_bus_hwmod_class,
-	.clkdm_name	= "mpuss_clkdm",
-	.prcm = {
-		.omap4 = {
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
-/*
- * 'ocp_wp_noc' class
- * instance(s): ocp_wp_noc
- */
-static struct omap_hwmod_class omap44xx_ocp_wp_noc_hwmod_class = {
-	.name	= "ocp_wp_noc",
-};
-
-/* ocp_wp_noc */
-static struct omap_hwmod omap44xx_ocp_wp_noc_hwmod = {
-	.name		= "ocp_wp_noc",
-	.class		= &omap44xx_ocp_wp_noc_hwmod_class,
-	.clkdm_name	= "l3_instr_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INSTR_OCP_WP1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
- * Modules omap_hwmod structures
- *
- * The following IPs are excluded for the moment because:
- * - They do not need an explicit SW control using omap_hwmod API.
- * - They still need to be validated with the driver
- *   properly adapted to omap_hwmod / omap_device
- *
- * usim
- */
-
-/*
- * 'ctrl_module' class
- * attila core control module + core pad control module + wkup pad control
- * module + attila wkup control module
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_ctrl_module_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_ctrl_module_hwmod_class = {
-	.name	= "ctrl_module",
-	.sysc	= &omap44xx_ctrl_module_sysc,
-};
-
-/* ctrl_module_core */
-static struct omap_hwmod omap44xx_ctrl_module_core_hwmod = {
-	.name		= "ctrl_module_core",
-	.class		= &omap44xx_ctrl_module_hwmod_class,
-	.clkdm_name	= "l4_cfg_clkdm",
-	.prcm = {
-		.omap4 = {
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
-/* ctrl_module_pad_core */
-static struct omap_hwmod omap44xx_ctrl_module_pad_core_hwmod = {
-	.name		= "ctrl_module_pad_core",
-	.class		= &omap44xx_ctrl_module_hwmod_class,
-	.clkdm_name	= "l4_cfg_clkdm",
-	.prcm = {
-		.omap4 = {
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
-/* ctrl_module_wkup */
-static struct omap_hwmod omap44xx_ctrl_module_wkup_hwmod = {
-	.name		= "ctrl_module_wkup",
-	.class		= &omap44xx_ctrl_module_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.prcm = {
-		.omap4 = {
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
-/* ctrl_module_pad_wkup */
-static struct omap_hwmod omap44xx_ctrl_module_pad_wkup_hwmod = {
-	.name		= "ctrl_module_pad_wkup",
-	.class		= &omap44xx_ctrl_module_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.prcm = {
-		.omap4 = {
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
-/*
- * 'debugss' class
- * debug and emulation sub system
- */
-
-static struct omap_hwmod_class omap44xx_debugss_hwmod_class = {
-	.name	= "debugss",
-};
-
-/* debugss */
-static struct omap_hwmod omap44xx_debugss_hwmod = {
-	.name		= "debugss",
-	.class		= &omap44xx_debugss_hwmod_class,
-	.clkdm_name	= "emu_sys_clkdm",
-	.main_clk	= "trace_clk_div_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_EMU_DEBUGSS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_EMU_DEBUGSS_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/*
- * 'emif' class
- * external memory interface no1
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_emif_sysc = {
-	.rev_offs	= 0x0000,
-};
-
-static struct omap_hwmod_class omap44xx_emif_hwmod_class = {
-	.name	= "emif",
-	.sysc	= &omap44xx_emif_sysc,
-};
-
-/* emif1 */
-static struct omap_hwmod omap44xx_emif1_hwmod = {
-	.name		= "emif1",
-	.class		= &omap44xx_emif_hwmod_class,
-	.clkdm_name	= "l3_emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE,
-	.main_clk	= "ddrphy_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_MEMIF_EMIF_1_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_MEMIF_EMIF_1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/* emif2 */
-static struct omap_hwmod omap44xx_emif2_hwmod = {
-	.name		= "emif2",
-	.class		= &omap44xx_emif_hwmod_class,
-	.clkdm_name	= "l3_emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE,
-	.main_clk	= "ddrphy_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_MEMIF_EMIF_2_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_MEMIF_EMIF_2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
- * 'iss' class
- * external images sensor pixel data processor
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	/*
-	 * ISS needs 100 OCP clk cycles delay after a softreset before
-	 * accessing sysconfig again.
-	 * The lowest frequency at the moment for L3 bus is 100 MHz, so
-	 * 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
-	 *
-	 * TODO: Indicate errata when available.
-	 */
-	.srst_udelay	= 2,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_iss_hwmod_class = {
-	.name	= "iss",
-	.sysc	= &omap44xx_iss_sysc,
-};
-
-/* iss */
-static struct omap_hwmod_opt_clk iss_opt_clks[] = {
-	{ .role = "ctrlclk", .clk = "iss_ctrlclk" },
-};
-
-static struct omap_hwmod omap44xx_iss_hwmod = {
-	.name		= "iss",
-	.class		= &omap44xx_iss_hwmod_class,
-	.clkdm_name	= "iss_clkdm",
-	.main_clk	= "ducati_clk_mux_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_CAM_ISS_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-	.opt_clks	= iss_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(iss_opt_clks),
-};
-
-/*
- * 'mpu' class
- * mpu sub-system
- */
-
-static struct omap_hwmod_class omap44xx_mpu_hwmod_class = {
-	.name	= "mpu",
-};
-
-/* mpu */
-static struct omap_hwmod omap44xx_mpu_hwmod = {
-	.name		= "mpu",
-	.class		= &omap44xx_mpu_hwmod_class,
-	.clkdm_name	= "mpuss_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE,
-	.main_clk	= "dpll_mpu_m2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_MPU_MPU_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_MPU_MPU_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/*
- * 'ocmc_ram' class
- * top-level core on-chip ram
- */
-
-static struct omap_hwmod_class omap44xx_ocmc_ram_hwmod_class = {
-	.name	= "ocmc_ram",
-};
-
-/* ocmc_ram */
-static struct omap_hwmod omap44xx_ocmc_ram_hwmod = {
-	.name		= "ocmc_ram",
-	.class		= &omap44xx_ocmc_ram_hwmod_class,
-	.clkdm_name	= "l3_2_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3_2_OCMC_RAM_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3_2_OCMC_RAM_CONTEXT_OFFSET,
-		},
-	},
-};
-
-
-/*
- * 'prcm' class
- * power and reset manager (part of the prcm infrastructure) + clock manager 2
- * + clock manager 1 (in always on power domain) + local prm in mpu
- */
-
-static struct omap_hwmod_class omap44xx_prcm_hwmod_class = {
-	.name	= "prcm",
-};
-
-/* prcm_mpu */
-static struct omap_hwmod omap44xx_prcm_mpu_hwmod = {
-	.name		= "prcm_mpu",
-	.class		= &omap44xx_prcm_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.flags		= HWMOD_NO_IDLEST,
-	.prcm = {
-		.omap4 = {
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
-/* cm_core_aon */
-static struct omap_hwmod omap44xx_cm_core_aon_hwmod = {
-	.name		= "cm_core_aon",
-	.class		= &omap44xx_prcm_hwmod_class,
-	.flags		= HWMOD_NO_IDLEST,
-	.prcm = {
-		.omap4 = {
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
-/* cm_core */
-static struct omap_hwmod omap44xx_cm_core_hwmod = {
-	.name		= "cm_core",
-	.class		= &omap44xx_prcm_hwmod_class,
-	.flags		= HWMOD_NO_IDLEST,
-	.prcm = {
-		.omap4 = {
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
-/* prm */
-static struct omap_hwmod_rst_info omap44xx_prm_resets[] = {
-	{ .name = "rst_global_warm_sw", .rst_shift = 0 },
-	{ .name = "rst_global_cold_sw", .rst_shift = 1 },
-};
-
-static struct omap_hwmod omap44xx_prm_hwmod = {
-	.name		= "prm",
-	.class		= &omap44xx_prcm_hwmod_class,
-	.rst_lines	= omap44xx_prm_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_prm_resets),
-};
-
-/*
- * 'scrm' class
- * system clock and reset manager
- */
-
-static struct omap_hwmod_class omap44xx_scrm_hwmod_class = {
-	.name	= "scrm",
-};
-
-/* scrm */
-static struct omap_hwmod omap44xx_scrm_hwmod = {
-	.name		= "scrm",
-	.class		= &omap44xx_scrm_hwmod_class,
-	.clkdm_name	= "l4_wkup_clkdm",
-	.prcm = {
-		.omap4 = {
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
-/*
- * 'sl2if' class
- * shared level 2 memory interface
- */
-
-static struct omap_hwmod_class omap44xx_sl2if_hwmod_class = {
-	.name	= "sl2if",
-};
-
-/* sl2if */
-static struct omap_hwmod omap44xx_sl2if_hwmod = {
-	.name		= "sl2if",
-	.class		= &omap44xx_sl2if_hwmod_class,
-	.clkdm_name	= "ivahd_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_IVAHD_SL2_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_IVAHD_SL2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
- * interfaces
- */
-
-/* l3_main_1 -> dmm */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = {
-	.master		= &omap44xx_l3_main_1_hwmod,
-	.slave		= &omap44xx_dmm_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_SDMA,
-};
-
-/* mpu -> dmm */
-static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = {
-	.master		= &omap44xx_mpu_hwmod,
-	.slave		= &omap44xx_dmm_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_3 -> l3_instr */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = {
-	.master		= &omap44xx_l3_main_3_hwmod,
-	.slave		= &omap44xx_l3_instr_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* ocp_wp_noc -> l3_instr */
-static struct omap_hwmod_ocp_if omap44xx_ocp_wp_noc__l3_instr = {
-	.master		= &omap44xx_ocp_wp_noc_hwmod,
-	.slave		= &omap44xx_l3_instr_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = {
-	.master		= &omap44xx_mpu_hwmod,
-	.slave		= &omap44xx_l3_main_1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU,
-};
-
-/* debugss -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_debugss__l3_main_2 = {
-	.master		= &omap44xx_debugss_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "dbgclk_mux_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* iss -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_iss__l3_main_2 = {
-	.master		= &omap44xx_iss_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = {
-	.master		= &omap44xx_l3_main_1_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_cfg -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = {
-	.master		= &omap44xx_l3_main_1_hwmod,
-	.slave		= &omap44xx_l3_main_3_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_2 -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_3 = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_l3_main_3_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_l3_main_3_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_cfg */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = {
-	.master		= &omap44xx_l3_main_1_hwmod,
-	.slave		= &omap44xx_l4_cfg_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> l4_per */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_l4_per_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l4_wkup */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_l4_wkup_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> mpu_private */
-static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = {
-	.master		= &omap44xx_mpu_hwmod,
-	.slave		= &omap44xx_mpu_private_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> ocp_wp_noc */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp_wp_noc = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_ocp_wp_noc_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> ctrl_module_core */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ctrl_module_core = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_ctrl_module_core_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> ctrl_module_pad_core */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ctrl_module_pad_core = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_ctrl_module_pad_core_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> ctrl_module_wkup */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__ctrl_module_wkup = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_ctrl_module_wkup_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> ctrl_module_pad_wkup */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__ctrl_module_pad_wkup = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_ctrl_module_pad_wkup_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_instr -> debugss */
-static struct omap_hwmod_ocp_if omap44xx_l3_instr__debugss = {
-	.master		= &omap44xx_l3_instr_hwmod,
-	.slave		= &omap44xx_debugss_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> iss */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_iss_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> ocmc_ram */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ocmc_ram = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_ocmc_ram_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu_private -> prcm_mpu */
-static struct omap_hwmod_ocp_if omap44xx_mpu_private__prcm_mpu = {
-	.master		= &omap44xx_mpu_private_hwmod,
-	.slave		= &omap44xx_prcm_mpu_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> cm_core_aon */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__cm_core_aon = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_cm_core_aon_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> cm_core */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__cm_core = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_cm_core_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> prm */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__prm = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_prm_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> scrm */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__scrm = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_scrm_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> sl2if */
-static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = {
-	.master		= &omap44xx_l3_main_2_hwmod,
-	.slave		= &omap44xx_sl2if_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> emif1 */
-static struct omap_hwmod_ocp_if omap44xx_mpu__emif1 = {
-	.master		= &omap44xx_mpu_hwmod,
-	.slave		= &omap44xx_emif1_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> emif2 */
-static struct omap_hwmod_ocp_if omap44xx_mpu__emif2 = {
-	.master		= &omap44xx_mpu_hwmod,
-	.slave		= &omap44xx_emif2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
-	&omap44xx_l3_main_1__dmm,
-	&omap44xx_mpu__dmm,
-	&omap44xx_l3_main_3__l3_instr,
-	&omap44xx_ocp_wp_noc__l3_instr,
-	&omap44xx_l3_main_2__l3_main_1,
-	&omap44xx_l4_cfg__l3_main_1,
-	&omap44xx_mpu__l3_main_1,
-	&omap44xx_debugss__l3_main_2,
-	&omap44xx_iss__l3_main_2,
-	&omap44xx_l3_main_1__l3_main_2,
-	&omap44xx_l4_cfg__l3_main_2,
-	&omap44xx_l3_main_1__l3_main_3,
-	&omap44xx_l3_main_2__l3_main_3,
-	&omap44xx_l4_cfg__l3_main_3,
-	&omap44xx_l3_main_1__l4_cfg,
-	&omap44xx_l3_main_2__l4_per,
-	&omap44xx_l4_cfg__l4_wkup,
-	&omap44xx_mpu__mpu_private,
-	&omap44xx_l4_cfg__ocp_wp_noc,
-	&omap44xx_l4_cfg__ctrl_module_core,
-	&omap44xx_l4_cfg__ctrl_module_pad_core,
-	&omap44xx_l4_wkup__ctrl_module_wkup,
-	&omap44xx_l4_wkup__ctrl_module_pad_wkup,
-	&omap44xx_l3_instr__debugss,
-	&omap44xx_l3_main_2__iss,
-	&omap44xx_l3_main_2__ocmc_ram,
-	&omap44xx_mpu_private__prcm_mpu,
-	&omap44xx_l4_wkup__cm_core_aon,
-	&omap44xx_l4_cfg__cm_core,
-	&omap44xx_l4_wkup__prm,
-	&omap44xx_l4_wkup__scrm,
-	/* &omap44xx_l3_main_2__sl2if, */
-	&omap44xx_mpu__emif1,
-	&omap44xx_mpu__emif2,
-	NULL,
-};
-
-int __init omap44xx_hwmod_init(void)
-{
-	omap_hwmod_init();
-	return omap_hwmod_register_links(omap44xx_hwmod_ocp_ifs);
-}
-
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
deleted file mode 100644
index 85b9ab4756ed..000000000000
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ /dev/null
@@ -1,467 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware modules present on the OMAP54xx chips
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
- *
- * Paul Walmsley
- * Benoit Cousson
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- */
-
-#include <linux/io.h>
-#include <linux/power/smartreflex.h>
-
-#include "omap_hwmod.h"
-#include "omap_hwmod_common_data.h"
-#include "cm1_54xx.h"
-#include "cm2_54xx.h"
-#include "prm54xx.h"
-
-/* Base offset for all OMAP5 interrupts external to MPUSS */
-#define OMAP54XX_IRQ_GIC_START	32
-
-/*
- * IP blocks
- */
-
-/*
- * 'dmm' class
- * instance(s): dmm
- */
-static struct omap_hwmod_class omap54xx_dmm_hwmod_class = {
-	.name	= "dmm",
-};
-
-/* dmm */
-static struct omap_hwmod omap54xx_dmm_hwmod = {
-	.name		= "dmm",
-	.class		= &omap54xx_dmm_hwmod_class,
-	.clkdm_name	= "emif_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_EMIF_DMM_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_EMIF_DMM_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/*
- * 'l3' class
- * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3
- */
-static struct omap_hwmod_class omap54xx_l3_hwmod_class = {
-	.name	= "l3",
-};
-
-/* l3_instr */
-static struct omap_hwmod omap54xx_l3_instr_hwmod = {
-	.name		= "l3_instr",
-	.class		= &omap54xx_l3_hwmod_class,
-	.clkdm_name	= "l3instr_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/* l3_main_1 */
-static struct omap_hwmod omap54xx_l3_main_1_hwmod = {
-	.name		= "l3_main_1",
-	.class		= &omap54xx_l3_hwmod_class,
-	.clkdm_name	= "l3main1_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* l3_main_2 */
-static struct omap_hwmod omap54xx_l3_main_2_hwmod = {
-	.name		= "l3_main_2",
-	.class		= &omap54xx_l3_hwmod_class,
-	.clkdm_name	= "l3main2_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3MAIN2_L3_MAIN_2_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3MAIN2_L3_MAIN_2_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* l3_main_3 */
-static struct omap_hwmod omap54xx_l3_main_3_hwmod = {
-	.name		= "l3_main_3",
-	.class		= &omap54xx_l3_hwmod_class,
-	.clkdm_name	= "l3instr_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3INSTR_L3_MAIN_3_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3INSTR_L3_MAIN_3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
- * 'l4' class
- * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup
- */
-static struct omap_hwmod_class omap54xx_l4_hwmod_class = {
-	.name	= "l4",
-};
-
-/* l4_cfg */
-static struct omap_hwmod omap54xx_l4_cfg_hwmod = {
-	.name		= "l4_cfg",
-	.class		= &omap54xx_l4_hwmod_class,
-	.clkdm_name	= "l4cfg_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* l4_per */
-static struct omap_hwmod omap54xx_l4_per_hwmod = {
-	.name		= "l4_per",
-	.class		= &omap54xx_l4_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L4PER_L4_PER_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L4PER_L4_PER_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* l4_wkup */
-static struct omap_hwmod omap54xx_l4_wkup_hwmod = {
-	.name		= "l4_wkup",
-	.class		= &omap54xx_l4_hwmod_class,
-	.clkdm_name	= "wkupaon_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/*
- * 'mpu_bus' class
- * instance(s): mpu_private
- */
-static struct omap_hwmod_class omap54xx_mpu_bus_hwmod_class = {
-	.name	= "mpu_bus",
-};
-
-/* mpu_private */
-static struct omap_hwmod omap54xx_mpu_private_hwmod = {
-	.name		= "mpu_private",
-	.class		= &omap54xx_mpu_bus_hwmod_class,
-	.clkdm_name	= "mpu_clkdm",
-	.prcm = {
-		.omap4 = {
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
-/*
- * 'emif' class
- * external memory interface no1 (wrapper)
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_emif_sysc = {
-	.rev_offs	= 0x0000,
-};
-
-static struct omap_hwmod_class omap54xx_emif_hwmod_class = {
-	.name	= "emif",
-	.sysc	= &omap54xx_emif_sysc,
-};
-
-/* emif1 */
-static struct omap_hwmod omap54xx_emif1_hwmod = {
-	.name		= "emif1",
-	.class		= &omap54xx_emif_hwmod_class,
-	.clkdm_name	= "emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE,
-	.main_clk	= "dpll_core_h11x2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_EMIF_EMIF1_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_EMIF_EMIF1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/* emif2 */
-static struct omap_hwmod omap54xx_emif2_hwmod = {
-	.name		= "emif2",
-	.class		= &omap54xx_emif_hwmod_class,
-	.clkdm_name	= "emif_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE,
-	.main_clk	= "dpll_core_h11x2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_EMIF_EMIF2_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_EMIF_EMIF2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-
-
-
-/*
- * 'mpu' class
- * mpu sub-system
- */
-
-static struct omap_hwmod_class omap54xx_mpu_hwmod_class = {
-	.name	= "mpu",
-};
-
-/* mpu */
-static struct omap_hwmod omap54xx_mpu_hwmod = {
-	.name		= "mpu",
-	.class		= &omap54xx_mpu_hwmod_class,
-	.clkdm_name	= "mpu_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE,
-	.main_clk	= "dpll_mpu_m2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_MPU_MPU_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_MPU_MPU_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/*
- * 'sata' class
- * sata:  serial ata interface  gen2 compliant   ( 1 rx/ 1 tx)
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_sata_sysc = {
-	.rev_offs	= 0x00fc,
-	.sysc_offs	= 0x0000,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap54xx_sata_hwmod_class = {
-	.name	= "sata",
-	.sysc	= &omap54xx_sata_sysc,
-};
-
-/* sata */
-static struct omap_hwmod omap54xx_sata_hwmod = {
-	.name		= "sata",
-	.class		= &omap54xx_sata_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	.main_clk	= "func_48m_fclk",
-	.mpu_rt_idx	= 1,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3INIT_SATA_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3INIT_SATA_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* l4_cfg -> sata */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__sata = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_sata_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/*
- * Interfaces
- */
-
-/* l3_main_1 -> dmm */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_1__dmm = {
-	.master		= &omap54xx_l3_main_1_hwmod,
-	.slave		= &omap54xx_dmm_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_SDMA,
-};
-
-/* l3_main_3 -> l3_instr */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_3__l3_instr = {
-	.master		= &omap54xx_l3_main_3_hwmod,
-	.slave		= &omap54xx_l3_instr_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l3_main_1 = {
-	.master		= &omap54xx_l3_main_2_hwmod,
-	.slave		= &omap54xx_l3_main_1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_1 = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_l3_main_1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap54xx_mpu__l3_main_1 = {
-	.master		= &omap54xx_mpu_hwmod,
-	.slave		= &omap54xx_l3_main_1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_1 -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_2 = {
-	.master		= &omap54xx_l3_main_1_hwmod,
-	.slave		= &omap54xx_l3_main_2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_cfg -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_2 = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_l3_main_2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_3 = {
-	.master		= &omap54xx_l3_main_1_hwmod,
-	.slave		= &omap54xx_l3_main_3_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_2 -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l3_main_3 = {
-	.master		= &omap54xx_l3_main_2_hwmod,
-	.slave		= &omap54xx_l3_main_3_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_3 = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_l3_main_3_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_cfg */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_cfg = {
-	.master		= &omap54xx_l3_main_1_hwmod,
-	.slave		= &omap54xx_l4_cfg_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> l4_per */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l4_per = {
-	.master		= &omap54xx_l3_main_2_hwmod,
-	.slave		= &omap54xx_l4_per_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_wkup */
-static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_wkup = {
-	.master		= &omap54xx_l3_main_1_hwmod,
-	.slave		= &omap54xx_l4_wkup_hwmod,
-	.clk		= "wkupaon_iclk_mux",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> mpu_private */
-static struct omap_hwmod_ocp_if omap54xx_mpu__mpu_private = {
-	.master		= &omap54xx_mpu_hwmod,
-	.slave		= &omap54xx_mpu_private_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> emif1 */
-static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = {
-	.master		= &omap54xx_mpu_hwmod,
-	.slave		= &omap54xx_emif1_hwmod,
-	.clk		= "dpll_core_h11x2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> emif2 */
-static struct omap_hwmod_ocp_if omap54xx_mpu__emif2 = {
-	.master		= &omap54xx_mpu_hwmod,
-	.slave		= &omap54xx_emif2_hwmod,
-	.clk		= "dpll_core_h11x2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> mpu */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_mpu_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
-	&omap54xx_l3_main_1__dmm,
-	&omap54xx_l3_main_3__l3_instr,
-	&omap54xx_l3_main_2__l3_main_1,
-	&omap54xx_l4_cfg__l3_main_1,
-	&omap54xx_mpu__l3_main_1,
-	&omap54xx_l3_main_1__l3_main_2,
-	&omap54xx_l4_cfg__l3_main_2,
-	&omap54xx_l3_main_1__l3_main_3,
-	&omap54xx_l3_main_2__l3_main_3,
-	&omap54xx_l4_cfg__l3_main_3,
-	&omap54xx_l3_main_1__l4_cfg,
-	&omap54xx_l3_main_2__l4_per,
-	&omap54xx_l3_main_1__l4_wkup,
-	&omap54xx_mpu__mpu_private,
-	&omap54xx_mpu__emif1,
-	&omap54xx_mpu__emif2,
-	&omap54xx_l4_cfg__mpu,
-	&omap54xx_l4_cfg__sata,
-	NULL,
-};
-
-int __init omap54xx_hwmod_init(void)
-{
-	omap_hwmod_init();
-	return omap_hwmod_register_links(omap54xx_hwmod_ocp_ifs);
-}
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
deleted file mode 100644
index 48c2a808bd46..000000000000
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ /dev/null
@@ -1,719 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware modules present on the DRA7xx chips
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
- *
- * Paul Walmsley
- * Benoit Cousson
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- */
-
-#include <linux/io.h>
-
-#include "omap_hwmod.h"
-#include "omap_hwmod_common_data.h"
-#include "cm1_7xx.h"
-#include "cm2_7xx.h"
-#include "prm7xx.h"
-#include "soc.h"
-
-/* Base offset for all DRA7XX interrupts external to MPUSS */
-#define DRA7XX_IRQ_GIC_START	32
-
-/*
- * IP blocks
- */
-
-/*
- * 'dmm' class
- * instance(s): dmm
- */
-static struct omap_hwmod_class dra7xx_dmm_hwmod_class = {
-	.name	= "dmm",
-};
-
-/* dmm */
-static struct omap_hwmod dra7xx_dmm_hwmod = {
-	.name		= "dmm",
-	.class		= &dra7xx_dmm_hwmod_class,
-	.clkdm_name	= "emif_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_EMIF_DMM_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_EMIF_DMM_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/*
- * 'l3' class
- * instance(s): l3_instr, l3_main_1, l3_main_2
- */
-static struct omap_hwmod_class dra7xx_l3_hwmod_class = {
-	.name	= "l3",
-};
-
-/* l3_instr */
-static struct omap_hwmod dra7xx_l3_instr_hwmod = {
-	.name		= "l3_instr",
-	.class		= &dra7xx_l3_hwmod_class,
-	.clkdm_name	= "l3instr_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/* l3_main_1 */
-static struct omap_hwmod dra7xx_l3_main_1_hwmod = {
-	.name		= "l3_main_1",
-	.class		= &dra7xx_l3_hwmod_class,
-	.clkdm_name	= "l3main1_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* l3_main_2 */
-static struct omap_hwmod dra7xx_l3_main_2_hwmod = {
-	.name		= "l3_main_2",
-	.class		= &dra7xx_l3_hwmod_class,
-	.clkdm_name	= "l3instr_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INSTR_L3_MAIN_2_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INSTR_L3_MAIN_2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
- * 'l4' class
- * instance(s): l4_cfg, l4_per1, l4_per2, l4_per3, l4_wkup
- */
-static struct omap_hwmod_class dra7xx_l4_hwmod_class = {
-	.name	= "l4",
-};
-
-/* l4_cfg */
-static struct omap_hwmod dra7xx_l4_cfg_hwmod = {
-	.name		= "l4_cfg",
-	.class		= &dra7xx_l4_hwmod_class,
-	.clkdm_name	= "l4cfg_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* l4_per1 */
-static struct omap_hwmod dra7xx_l4_per1_hwmod = {
-	.name		= "l4_per1",
-	.class		= &dra7xx_l4_hwmod_class,
-	.clkdm_name	= "l4per_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER_L4_PER1_CLKCTRL_OFFSET,
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
-/* l4_per2 */
-static struct omap_hwmod dra7xx_l4_per2_hwmod = {
-	.name		= "l4_per2",
-	.class		= &dra7xx_l4_hwmod_class,
-	.clkdm_name	= "l4per2_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER2_L4_PER2_CLKCTRL_OFFSET,
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
-/* l4_per3 */
-static struct omap_hwmod dra7xx_l4_per3_hwmod = {
-	.name		= "l4_per3",
-	.class		= &dra7xx_l4_hwmod_class,
-	.clkdm_name	= "l4per3_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER3_L4_PER3_CLKCTRL_OFFSET,
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
-/* l4_wkup */
-static struct omap_hwmod dra7xx_l4_wkup_hwmod = {
-	.name		= "l4_wkup",
-	.class		= &dra7xx_l4_hwmod_class,
-	.clkdm_name	= "wkupaon_clkdm",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/*
- * 'atl' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_atl_hwmod_class = {
-	.name	= "atl",
-};
-
-/* atl */
-static struct omap_hwmod dra7xx_atl_hwmod = {
-	.name		= "atl",
-	.class		= &dra7xx_atl_hwmod_class,
-	.clkdm_name	= "atl_clkdm",
-	.main_clk	= "atl_gfclk_mux",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_ATL_ATL_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_ATL_ATL_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'bb2d' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_bb2d_hwmod_class = {
-	.name	= "bb2d",
-};
-
-/* bb2d */
-static struct omap_hwmod dra7xx_bb2d_hwmod = {
-	.name		= "bb2d",
-	.class		= &dra7xx_bb2d_hwmod_class,
-	.clkdm_name	= "dss_clkdm",
-	.main_clk	= "dpll_core_h24x2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_DSS_BB2D_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_DSS_BB2D_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'ctrl_module' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_ctrl_module_hwmod_class = {
-	.name	= "ctrl_module",
-};
-
-/* ctrl_module_wkup */
-static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = {
-	.name		= "ctrl_module_wkup",
-	.class		= &dra7xx_ctrl_module_hwmod_class,
-	.clkdm_name	= "wkupaon_clkdm",
-	.prcm = {
-		.omap4 = {
-			.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT,
-		},
-	},
-};
-
-/*
- * 'mpu' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_mpu_hwmod_class = {
-	.name	= "mpu",
-};
-
-/* mpu */
-static struct omap_hwmod dra7xx_mpu_hwmod = {
-	.name		= "mpu",
-	.class		= &dra7xx_mpu_hwmod_class,
-	.clkdm_name	= "mpu_clkdm",
-	.flags		= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
-	.main_clk	= "dpll_mpu_m2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_MPU_MPU_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_MPU_MPU_CONTEXT_OFFSET,
-		},
-	},
-};
-
-
-/*
- * 'PCIE' class
- *
- */
-
-/*
- * As noted in documentation for _reset() in omap_hwmod.c, the stock reset
- * functionality of OMAP HWMOD layer does not deassert the hardreset lines
- * associated with an IP automatically leaving the driver to handle that
- * by itself. This does not work for PCIeSS which needs the reset lines
- * deasserted for the driver to start accessing registers.
- *
- * We use a PCIeSS HWMOD class specific reset handler to deassert the hardreset
- * lines after asserting them.
- */
-int dra7xx_pciess_reset(struct omap_hwmod *oh)
-{
-	int i;
-
-	for (i = 0; i < oh->rst_lines_cnt; i++) {
-		omap_hwmod_assert_hardreset(oh, oh->rst_lines[i].name);
-		omap_hwmod_deassert_hardreset(oh, oh->rst_lines[i].name);
-	}
-
-	return 0;
-}
-
-static struct omap_hwmod_class dra7xx_pciess_hwmod_class = {
-	.name	= "pcie",
-	.reset	= dra7xx_pciess_reset,
-};
-
-/* pcie1 */
-static struct omap_hwmod_rst_info dra7xx_pciess1_resets[] = {
-	{ .name = "pcie", .rst_shift = 0 },
-};
-
-static struct omap_hwmod dra7xx_pciess1_hwmod = {
-	.name		= "pcie1",
-	.class		= &dra7xx_pciess_hwmod_class,
-	.clkdm_name	= "pcie_clkdm",
-	.rst_lines	= dra7xx_pciess1_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(dra7xx_pciess1_resets),
-	.main_clk	= "l4_root_clk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET,
-			.rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/* pcie2 */
-static struct omap_hwmod_rst_info dra7xx_pciess2_resets[] = {
-	{ .name = "pcie", .rst_shift = 1 },
-};
-
-/* pcie2 */
-static struct omap_hwmod dra7xx_pciess2_hwmod = {
-	.name		= "pcie2",
-	.class		= &dra7xx_pciess_hwmod_class,
-	.clkdm_name	= "pcie_clkdm",
-	.rst_lines	= dra7xx_pciess2_resets,
-	.rst_lines_cnt	= ARRAY_SIZE(dra7xx_pciess2_resets),
-	.main_clk	= "l4_root_clk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET,
-			.rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'qspi' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_qspi_sysc = {
-	.rev_offs	= 0,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE,
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class dra7xx_qspi_hwmod_class = {
-	.name	= "qspi",
-	.sysc	= &dra7xx_qspi_sysc,
-};
-
-/* qspi */
-static struct omap_hwmod dra7xx_qspi_hwmod = {
-	.name		= "qspi",
-	.class		= &dra7xx_qspi_hwmod_class,
-	.clkdm_name	= "l4per2_clkdm",
-	.main_clk	= "qspi_gfclk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L4PER2_QSPI_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L4PER2_QSPI_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'sata' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_sata_sysc = {
-	.rev_offs	= 0x00fc,
-	.sysc_offs	= 0x0000,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class dra7xx_sata_hwmod_class = {
-	.name	= "sata",
-	.sysc	= &dra7xx_sata_sysc,
-};
-
-/* sata */
-
-static struct omap_hwmod dra7xx_sata_hwmod = {
-	.name		= "sata",
-	.class		= &dra7xx_sata_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	.main_clk	= "func_48m_fclk",
-	.mpu_rt_idx	= 1,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_SATA_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'vcp' class
- *
- */
-
-static struct omap_hwmod_class dra7xx_vcp_hwmod_class = {
-	.name	= "vcp",
-};
-
-/* vcp1 */
-static struct omap_hwmod dra7xx_vcp1_hwmod = {
-	.name		= "vcp1",
-	.class		= &dra7xx_vcp_hwmod_class,
-	.clkdm_name	= "l3main1_clkdm",
-	.main_clk	= "l3_iclk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3MAIN1_VCP1_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3MAIN1_VCP1_CONTEXT_OFFSET,
-		},
-	},
-};
-
-/* vcp2 */
-static struct omap_hwmod dra7xx_vcp2_hwmod = {
-	.name		= "vcp2",
-	.class		= &dra7xx_vcp_hwmod_class,
-	.clkdm_name	= "l3main1_clkdm",
-	.main_clk	= "l3_iclk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3MAIN1_VCP2_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3MAIN1_VCP2_CONTEXT_OFFSET,
-		},
-	},
-};
-
-
-
-/*
- * Interfaces
- */
-
-/* l3_main_1 -> dmm */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dmm = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_dmm_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> l3_instr */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_2__l3_instr = {
-	.master		= &dra7xx_l3_main_2_hwmod,
-	.slave		= &dra7xx_l3_instr_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l3_main_1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__l3_main_1 = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_l3_main_1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> l3_main_1 */
-static struct omap_hwmod_ocp_if dra7xx_mpu__l3_main_1 = {
-	.master		= &dra7xx_mpu_hwmod,
-	.slave		= &dra7xx_l3_main_1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU,
-};
-
-/* l3_main_1 -> l3_main_2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l3_main_2 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_l3_main_2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_cfg -> l3_main_2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__l3_main_2 = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_l3_main_2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_cfg */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_cfg = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_l4_cfg_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_per1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per1 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_l4_per1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_per2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per2 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_l4_per2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_per3 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per3 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_l4_per3_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_wkup */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_wkup = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_l4_wkup_hwmod,
-	.clk		= "wkupaon_iclk_mux",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per2 -> atl */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__atl = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_atl_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> bb2d */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__bb2d = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_bb2d_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> ctrl_module_wkup */
-static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = {
-	.master		= &dra7xx_l4_wkup_hwmod,
-	.slave		= &dra7xx_ctrl_module_wkup_hwmod,
-	.clk		= "wkupaon_iclk_mux",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> mpu */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_mpu_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> pciess1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_pciess1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> pciess1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess1 = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_pciess1_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> pciess2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess2 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_pciess2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> pciess2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_pciess2_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> qspi */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__qspi = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_qspi_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> sata */
-static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = {
-	.master		= &dra7xx_l4_cfg_hwmod,
-	.slave		= &dra7xx_sata_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> vcp1 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp1 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_vcp1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per2 -> vcp1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp1 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_vcp1_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> vcp2 */
-static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp2 = {
-	.master		= &dra7xx_l3_main_1_hwmod,
-	.slave		= &dra7xx_vcp2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per2 -> vcp2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp2 = {
-	.master		= &dra7xx_l4_per2_hwmod,
-	.slave		= &dra7xx_vcp2_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
-	&dra7xx_l3_main_1__dmm,
-	&dra7xx_l3_main_2__l3_instr,
-	&dra7xx_l4_cfg__l3_main_1,
-	&dra7xx_mpu__l3_main_1,
-	&dra7xx_l3_main_1__l3_main_2,
-	&dra7xx_l4_cfg__l3_main_2,
-	&dra7xx_l3_main_1__l4_cfg,
-	&dra7xx_l3_main_1__l4_per1,
-	&dra7xx_l3_main_1__l4_per2,
-	&dra7xx_l3_main_1__l4_per3,
-	&dra7xx_l3_main_1__l4_wkup,
-	&dra7xx_l4_per2__atl,
-	&dra7xx_l3_main_1__bb2d,
-	&dra7xx_l4_wkup__ctrl_module_wkup,
-	&dra7xx_l4_cfg__mpu,
-	&dra7xx_l3_main_1__pciess1,
-	&dra7xx_l4_cfg__pciess1,
-	&dra7xx_l3_main_1__pciess2,
-	&dra7xx_l4_cfg__pciess2,
-	&dra7xx_l3_main_1__qspi,
-	&dra7xx_l4_cfg__sata,
-	&dra7xx_l3_main_1__vcp1,
-	&dra7xx_l4_per2__vcp1,
-	&dra7xx_l3_main_1__vcp2,
-	&dra7xx_l4_per2__vcp2,
-	NULL,
-};
-
-/* SoC variant specific hwmod links */
-static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = {
-	NULL,
-};
-
-static struct omap_hwmod_ocp_if *rtc_hwmod_ocp_ifs[] __initdata = {
-	NULL,
-};
-
-int __init dra7xx_hwmod_init(void)
-{
-	int ret;
-
-	omap_hwmod_init();
-	ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs);
-
-	if (!ret && soc_is_dra74x()) {
-		ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
-	} else if (!ret && soc_is_dra72x()) {
-		ret = omap_hwmod_register_links(dra72x_hwmod_ocp_ifs);
-		if (!ret && !of_machine_is_compatible("ti,dra718"))
-			ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
-	} else if (!ret && soc_is_dra76x()) {
-		if (!ret && soc_is_dra76x_abz())
-			ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
-	}
-
-	return ret;
-}
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index 450ab990c66a..9b5c728fb7da 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -1,18 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * DM81xx hwmod data.
  *
  * Copyright (C) 2010 Texas Instruments, Inc. - https://www.ti.com/
  * Copyright (C) 2013 SKTB SKiT, http://www.skitlab.ru/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/types.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 0045e6680a63..69dddc53e1d8 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -20,7 +20,6 @@ extern struct omap_hwmod omap2xxx_l3_main_hwmod;
 extern struct omap_hwmod omap2xxx_l4_core_hwmod;
 extern struct omap_hwmod omap2xxx_l4_wkup_hwmod;
 extern struct omap_hwmod omap2xxx_mpu_hwmod;
-extern struct omap_hwmod omap2xxx_iva_hwmod;
 extern struct omap_hwmod omap2xxx_timer3_hwmod;
 extern struct omap_hwmod omap2xxx_timer4_hwmod;
 extern struct omap_hwmod omap2xxx_timer5_hwmod;
@@ -60,7 +59,6 @@ extern struct omap_hwmod_ocp_if omap2_l4_core__uart2;
 extern struct omap_hwmod_ocp_if omap2_l4_core__uart3;
 extern struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi1;
 extern struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi2;
-extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer2;
 extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer3;
 extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer4;
 extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer5;
@@ -86,14 +84,10 @@ extern struct omap_hwmod_class mpu_hwmod_class;
 extern struct omap_hwmod_class iva_hwmod_class;
 extern struct omap_hwmod_class omap2_uart_class;
 extern struct omap_hwmod_class omap2_dss_hwmod_class;
-extern struct omap_hwmod_class omap2_dispc_hwmod_class;
 extern struct omap_hwmod_class omap2_rfbi_hwmod_class;
 extern struct omap_hwmod_class omap2_venc_hwmod_class;
-extern struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc;
 extern struct omap_hwmod_class omap2_hdq1w_class;
 
-extern struct omap_hwmod_class omap2xxx_timer_hwmod_class;
-extern struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_gpio_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_mcspi_class;
diff --git a/arch/arm/mach-omap2/omap_hwmod_reset.c b/arch/arm/mach-omap2/omap_hwmod_reset.c
deleted file mode 100644
index 143623bb056d..000000000000
--- a/arch/arm/mach-omap2/omap_hwmod_reset.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * OMAP IP block custom reset and preprogramming stubs
- *
- * Copyright (C) 2012 Texas Instruments, Inc.
- * Paul Walmsley
- *
- * A small number of IP blocks need custom reset and preprogramming
- * functions.  The stubs in this file provide a standard way for the
- * hwmod code to call these functions, which are to be located under
- * drivers/.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-
-#include "omap_hwmod.h"
-#include "common.h"
-
-#define OMAP_RTC_STATUS_REG	0x44
-#define OMAP_RTC_KICK0_REG	0x6c
-#define OMAP_RTC_KICK1_REG	0x70
-
-#define OMAP_RTC_KICK0_VALUE	0x83E70B13
-#define OMAP_RTC_KICK1_VALUE	0x95A4F1E0
-#define OMAP_RTC_STATUS_BUSY	BIT(0)
-#define OMAP_RTC_MAX_READY_TIME	50
-
-/**
- * omap_rtc_wait_not_busy - Wait for the RTC BUSY flag
- * @oh: struct omap_hwmod *
- *
- * For updating certain RTC registers, the MPU must wait
- * for the BUSY status in OMAP_RTC_STATUS_REG to become zero.
- * Once the BUSY status is zero, there is a 15 microseconds access
- * period in which the MPU can program.
- */
-static void omap_rtc_wait_not_busy(struct omap_hwmod *oh)
-{
-	int i;
-
-	/* BUSY may stay active for 1/32768 second (~30 usec) */
-	omap_test_timeout(omap_hwmod_read(oh, OMAP_RTC_STATUS_REG)
-			  & OMAP_RTC_STATUS_BUSY, OMAP_RTC_MAX_READY_TIME, i);
-	/* now we have ~15 microseconds to read/write various registers */
-}
-
-/**
- * omap_hwmod_rtc_unlock - Unlock the Kicker mechanism.
- * @oh: struct omap_hwmod *
- *
- * RTC IP have kicker feature. This prevents spurious writes to its registers.
- * In order to write into any of the RTC registers, KICK values has te be
- * written in respective KICK registers. This is needed for hwmod to write into
- * sysconfig register.
- */
-void omap_hwmod_rtc_unlock(struct omap_hwmod *oh)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	omap_rtc_wait_not_busy(oh);
-	omap_hwmod_write(OMAP_RTC_KICK0_VALUE, oh, OMAP_RTC_KICK0_REG);
-	omap_hwmod_write(OMAP_RTC_KICK1_VALUE, oh, OMAP_RTC_KICK1_REG);
-	local_irq_restore(flags);
-}
-
-/**
- * omap_hwmod_rtc_lock - Lock the Kicker mechanism.
- * @oh: struct omap_hwmod *
- *
- * RTC IP have kicker feature. This prevents spurious writes to its registers.
- * Once the RTC registers are written, KICK mechanism needs to be locked,
- * in order to prevent any spurious writes. This function locks back the RTC
- * registers once hwmod completes its write into sysconfig register.
- */
-void omap_hwmod_rtc_lock(struct omap_hwmod *oh)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	omap_rtc_wait_not_busy(oh);
-	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK0_REG);
-	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK1_REG);
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h
index 533dd643069a..ed84fe95e857 100644
--- a/arch/arm/mach-omap2/omap_opp_data.h
+++ b/arch/arm/mach-omap2/omap_opp_data.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * OMAP SoC specific OPP Data helpers
  *
@@ -6,15 +7,6 @@
  *	Kevin Hilman
  * Copyright (C) 2010 Nokia Corporation.
  *      Eduardo Valentin
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #ifndef __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
 #define __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
@@ -79,11 +71,6 @@ struct omap_opp_def {
 	.vp_errgain	= _errgain				       \
 }
 
-/* Use this to initialize the default table */
-extern int __init omap_init_opp_table(struct omap_opp_def *opp_def,
-		u32 opp_def_size);
-
-
 extern struct omap_volt_data omap34xx_vddmpu_volt_data[];
 extern struct omap_volt_data omap34xx_vddcore_volt_data[];
 extern struct omap_volt_data omap36xx_vddmpu_volt_data[];
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index 6f6a6a66c981..21c6e7929d37 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -19,7 +19,6 @@
 
 #include "soc.h"
 #include "control.h"
-#include "usb.h"
 
 #define CONTROL_DEV_CONF		0x300
 #define PHY_PD				0x1
@@ -52,89 +51,3 @@ static int __init omap4430_phy_power_down(void)
 	return 0;
 }
 omap_early_initcall(omap4430_phy_power_down);
-
-void am35x_musb_reset(void)
-{
-	u32	regval;
-
-	/* Reset the musb interface */
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-
-	regval |= AM35XX_USBOTGSS_SW_RST;
-	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
-
-	regval &= ~AM35XX_USBOTGSS_SW_RST;
-	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-}
-
-void am35x_musb_phy_power(u8 on)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(100);
-	u32 devconf2;
-
-	if (on) {
-		/*
-		 * Start the on-chip PHY and its PLL.
-		 */
-		devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-		devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
-		devconf2 |= CONF2_PHY_PLLON;
-
-		omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-
-		pr_info("Waiting for PHY clock good...\n");
-		while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
-				& CONF2_PHYCLKGD)) {
-			cpu_relax();
-
-			if (time_after(jiffies, timeout)) {
-				pr_err("musb PHY clock good timed out\n");
-				break;
-			}
-		}
-	} else {
-		/*
-		 * Power down the on-chip PHY.
-		 */
-		devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-		devconf2 &= ~CONF2_PHY_PLLON;
-		devconf2 |=  CONF2_PHYPWRDN | CONF2_OTGPWRDN;
-		omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-	}
-}
-
-void am35x_musb_clear_irq(void)
-{
-	u32 regval;
-
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval |= AM35XX_USBOTGSS_INT_CLR;
-	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
-	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-}
-
-void am35x_set_mode(u8 musb_mode)
-{
-	u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-	devconf2 &= ~CONF2_OTGMODE;
-	switch (musb_mode) {
-	case MUSB_HOST:		/* Force VBUS valid, ID = 0 */
-		devconf2 |= CONF2_FORCE_HOST;
-		break;
-	case MUSB_PERIPHERAL:	/* Force VBUS valid, ID = 1 */
-		devconf2 |= CONF2_FORCE_DEVICE;
-		break;
-	case MUSB_OTG:		/* Don't override the VBUS/ID comparators */
-		devconf2 |= CONF2_NO_OVERRIDE;
-		break;
-	default:
-		pr_info("Unsupported mode %u\n", musb_mode);
-	}
-
-	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-}
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index a642d3b39e50..d4dab041324d 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
  * OMAP and TWL PMIC specific initializations.
  *
  * Copyright (C) 2010 Texas Instruments Incorporated.
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
index b610c5fb423b..90257e2fb3d6 100644
--- a/arch/arm/mach-omap2/opp3xxx_data.c
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * OMAP3 OPP table definitions.
  *
@@ -7,15 +8,6 @@
  * Copyright (C) 2010-2011 Nokia Corporation.
  *      Eduardo Valentin
  *      Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #include <linux/module.h>
 
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
index d937c5ef41c6..a9851886017d 100644
--- a/arch/arm/mach-omap2/opp4xxx_data.c
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * OMAP4 OPP table definitions.
  *
@@ -8,15 +9,6 @@
  * Copyright (C) 2010-2011 Nokia Corporation.
  *      Eduardo Valentin
  *      Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 #include <linux/module.h>
 
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 2e3a10914c40..04208cc52784 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -6,11 +6,11 @@
  */
 #include <linux/clk.h>
 #include <linux/davinci_emac.h>
+#include <linux/gpio/consumer.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
-#include <linux/wl12xx.h>
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
 #include <linux/power/smartreflex.h>
@@ -43,17 +43,6 @@ struct pdata_init {
 static struct of_dev_auxdata omap_auxdata_lookup[];
 static struct twl4030_gpio_platform_data twl_gpio_auxdata;
 
-#if IS_ENABLED(CONFIG_OMAP_IOMMU)
-int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev, bool request,
-				    u8 *pwrst);
-#else
-static inline int omap_iommu_set_pwrdm_constraint(struct platform_device *pdev,
-						  bool request, u8 *pwrst)
-{
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_MACH_NOKIA_N8X0
 static void __init omap2420_n8x0_legacy_init(void)
 {
@@ -120,7 +109,7 @@ static int omap3_sbc_t3730_twl_callback(struct device *dev,
 	if (res)
 		return res;
 
-	gpio_export(gpio, 0);
+	gpiod_export(gpio_to_desc(gpio), 0);
 
 	return 0;
 }
@@ -135,7 +124,7 @@ static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
 		return;
 	}
 
-	gpio_export(gpio, 0);
+	gpiod_export(gpio_to_desc(gpio), 0);
 
 	udelay(10);
 	gpio_set_value(gpio, 1);
@@ -212,8 +201,8 @@ static void __init omap3_sbc_t3517_wifi_init(void)
 		return;
 	}
 
-	gpio_export(cm_t3517_wlan_gpios[0].gpio, 0);
-	gpio_export(cm_t3517_wlan_gpios[1].gpio, 0);
+	gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[0].gpio), 0);
+	gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[1].gpio), 0);
 
 	msleep(100);
 	gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
@@ -274,34 +263,10 @@ static void __init omap3_pandora_legacy_init(void)
 }
 #endif /* CONFIG_ARCH_OMAP3 */
 
-#ifdef CONFIG_SOC_OMAP5
-static void __init omap5_uevm_legacy_init(void)
-{
-}
-#endif
-
 #ifdef CONFIG_SOC_DRA7XX
 static struct iommu_platform_data dra7_ipu1_dsp_iommu_pdata = {
 	.set_pwrdm_constraint = omap_iommu_set_pwrdm_constraint,
 };
-
-static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc1;
-static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc2;
-static struct omap_hsmmc_platform_data dra7_hsmmc_data_mmc3;
-
-static void __init dra7x_evm_mmc_quirk(void)
-{
-	if (omap_rev() == DRA752_REV_ES1_1 || omap_rev() == DRA752_REV_ES1_0) {
-		dra7_hsmmc_data_mmc1.version = "rev11";
-		dra7_hsmmc_data_mmc1.max_freq = 96000000;
-
-		dra7_hsmmc_data_mmc2.version = "rev11";
-		dra7_hsmmc_data_mmc2.max_freq = 48000000;
-
-		dra7_hsmmc_data_mmc3.version = "rev11";
-		dra7_hsmmc_data_mmc3.max_freq = 48000000;
-	}
-}
 #endif
 
 static struct clockdomain *ti_sysc_find_one_clockdomain(struct clk *clk)
@@ -443,7 +408,7 @@ void omap_auxdata_legacy_init(struct device *dev)
 	dev->platform_data = &twl_gpio_auxdata;
 }
 
-#if IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP)
+#if defined(CONFIG_ARCH_OMAP3) && IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP)
 static struct omap_mcbsp_platform_data mcbsp_pdata;
 static void __init omap3_mcbsp_init(void)
 {
@@ -475,7 +440,6 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 #ifdef CONFIG_MACH_NOKIA_N8X0
 	OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
 	OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
-	OF_DEV_AUXDATA("tlv320aic3x", 0x18, "2-0018", &n810_aic33_data),
 #endif
 #ifdef CONFIG_ARCH_OMAP3
 	OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
@@ -508,12 +472,6 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 		       "4a0d9000.smartreflex", &omap_sr_pdata[OMAP_SR_MPU]),
 #endif
 #ifdef CONFIG_SOC_DRA7XX
-	OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x4809c000, "4809c000.mmc",
-		       &dra7_hsmmc_data_mmc1),
-	OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x480b4000, "480b4000.mmc",
-		       &dra7_hsmmc_data_mmc2),
-	OF_DEV_AUXDATA("ti,dra7-hsmmc", 0x480ad000, "480ad000.mmc",
-		       &dra7_hsmmc_data_mmc3),
 	OF_DEV_AUXDATA("ti,dra7-dsp-iommu", 0x40d01000, "40d01000.mmu",
 		       &dra7_ipu1_dsp_iommu_pdata),
 	OF_DEV_AUXDATA("ti,dra7-dsp-iommu", 0x41501000, "41501000.mmu",
@@ -549,12 +507,6 @@ static struct pdata_init pdata_quirks[] __initdata = {
 	{ "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, },
 	{ "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, },
 #endif
-#ifdef CONFIG_SOC_OMAP5
-	{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
-#endif
-#ifdef CONFIG_SOC_DRA7XX
-	{ "ti,dra7-evm", dra7x_evm_mmc_quirk, },
-#endif
 	{ /* sentinel */ },
 };
 
@@ -569,10 +521,31 @@ static void pdata_quirks_check(struct pdata_init *quirks)
 	}
 }
 
-void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
+static const char * const pdata_quirks_init_nodes[] = {
+	"prcm",
+	"prm",
+};
+
+static void __init
+pdata_quirks_init_clocks(const struct of_device_id *omap_dt_match_table)
 {
 	struct device_node *np;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pdata_quirks_init_nodes); i++) {
+		np = of_find_node_by_name(NULL, pdata_quirks_init_nodes[i]);
+		if (!np)
+			continue;
 
+		of_platform_populate(np, omap_dt_match_table,
+				     omap_auxdata_lookup, NULL);
+
+		of_node_put(np);
+	}
+}
+
+void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
+{
 	/*
 	 * We still need this for omap2420 and omap3 PM to work, others are
 	 * using drivers/misc/sram.c already.
@@ -585,13 +558,7 @@ void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
 		omap3_mcbsp_init();
 	pdata_quirks_check(auxdata_quirks);
 
-	/* Populate always-on PRCM in l4_wkup to probe l4_wkup */
-	np = of_find_node_by_name(NULL, "prcm");
-	if (!np)
-		np = of_find_node_by_name(NULL, "prm");
-	if (np)
-		of_platform_populate(np, omap_dt_match_table,
-				     omap_auxdata_lookup, NULL);
+	pdata_quirks_init_clocks(omap_dt_match_table);
 
 	of_platform_populate(NULL, omap_dt_match_table,
 			     omap_auxdata_lookup, NULL);
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 919d35d5b325..b43eab9879d3 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -168,8 +168,8 @@ static int pwrdm_suspend_set(void *data, u64 val)
 	return -EINVAL;
 }
 
-DEFINE_SIMPLE_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get,
-			pwrdm_suspend_set, "%llu\n");
+DEFINE_DEBUGFS_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get,
+			  pwrdm_suspend_set, "%llu\n");
 
 static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir)
 {
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index da829a90fe8c..700869c9eae1 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -54,12 +54,6 @@ static struct omap2_oscillator oscillator = {
 	.shutdown_time = ULONG_MAX,
 };
 
-void omap_pm_setup_oscillator(u32 tstart, u32 tshut)
-{
-	oscillator.startup_time = tstart;
-	oscillator.shutdown_time = tshut;
-}
-
 void omap_pm_get_oscillator(u32 *tstart, u32 *tshut)
 {
 	if (!tstart || !tshut)
@@ -140,7 +134,7 @@ int __maybe_unused omap_pm_nop_init(void)
 
 int (*omap_pm_soc_init)(void);
 
-int __init omap2_common_pm_late_init(void)
+static int __init omap2_common_pm_late_init(void)
 {
 	int error;
 
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 80e84ae66aee..f97ff93f2fb4 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -29,23 +29,9 @@ static inline int omap4_idle_init(void)
 
 extern void *omap3_secure_ram_storage;
 extern void omap3_pm_off_mode_enable(int);
-extern void omap_sram_idle(void);
+extern void omap_sram_idle(bool rcuidle);
 extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused);
 
-#if defined(CONFIG_PM_OPP)
-extern int omap3_opp_init(void);
-extern int omap4_opp_init(void);
-#else
-static inline int omap3_opp_init(void)
-{
-	return -EINVAL;
-}
-static inline int omap4_opp_init(void)
-{
-	return -EINVAL;
-}
-#endif
-
 extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
 extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
 
@@ -58,9 +44,6 @@ extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
 #endif /* CONFIG_PM_DEBUG */
 
 /* 24xx */
-extern void omap24xx_idle_loop_suspend(void);
-extern unsigned int omap24xx_idle_loop_suspend_sz;
-
 extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
 					void __iomem *sdrc_power);
 extern unsigned int omap24xx_cpu_suspend_sz;
@@ -110,20 +93,16 @@ extern u16 pm44xx_errata;
 
 #ifdef CONFIG_POWER_AVS_OMAP
 extern int omap_devinit_smartreflex(void);
-extern void omap_enable_smartreflex_on_init(void);
 #else
 static inline int omap_devinit_smartreflex(void)
 {
 	return -EINVAL;
 }
-
-static inline void omap_enable_smartreflex_on_init(void) {}
 #endif
 
 #ifdef CONFIG_TWL4030_CORE
 extern int omap3_twl_init(void);
 extern int omap4_twl_init(void);
-extern int omap3_twl_set_sr_bit(bool enable);
 #else
 static inline int omap3_twl_init(void)
 {
@@ -145,13 +124,9 @@ static inline int omap4_cpcap_init(void)
 #endif
 
 #ifdef CONFIG_PM
-extern void omap_pm_setup_oscillator(u32 tstart, u32 tshut);
 extern void omap_pm_get_oscillator(u32 *tstart, u32 *tshut);
-extern void omap_pm_setup_sr_i2c_pcb_length(u32 mm);
 #else
-static inline void omap_pm_setup_oscillator(u32 tstart, u32 tshut) { }
 static inline void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) { *tstart = *tshut = 0; }
-static inline void omap_pm_setup_sr_i2c_pcb_length(u32 mm) { }
 #endif
 
 #ifdef CONFIG_SUSPEND
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
deleted file mode 100644
index 6953c47d8dc6..000000000000
--- a/arch/arm/mach-omap2/pm24xx.c
+++ /dev/null
@@ -1,312 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * OMAP2 Power Management Routines
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Copyright (C) 2006-2008 Nokia Corporation
- *
- * Written by:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Tony Lindgren
- * Juha Yrjola
- * Amit Kucheria <amit.kucheria@nokia.com>
- * Igor Stoppa <igor.stoppa@nokia.com>
- *
- * Based on pm.c for omap1
- */
-
-#include <linux/cpu_pm.h>
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-
-#include <asm/fncpy.h>
-
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-#include <asm/system_misc.h>
-
-#include <linux/omap-dma.h>
-
-#include "soc.h"
-#include "common.h"
-#include "clock.h"
-#include "prm2xxx.h"
-#include "prm-regbits-24xx.h"
-#include "cm2xxx.h"
-#include "cm-regbits-24xx.h"
-#include "sdrc.h"
-#include "sram.h"
-#include "pm.h"
-#include "control.h"
-#include "powerdomain.h"
-#include "clockdomain.h"
-
-static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
-				  void __iomem *sdrc_power);
-
-static struct powerdomain *mpu_pwrdm, *core_pwrdm;
-static struct clockdomain *dsp_clkdm, *mpu_clkdm, *wkup_clkdm, *gfx_clkdm;
-
-static struct clk *osc_ck, *emul_ck;
-
-static int omap2_enter_full_retention(void)
-{
-	u32 l;
-
-	/* There is 1 reference hold for all children of the oscillator
-	 * clock, the following will remove it. If no one else uses the
-	 * oscillator itself it will be disabled if/when we enter retention
-	 * mode.
-	 */
-	clk_disable(osc_ck);
-
-	/* Clear old wake-up events */
-	/* REVISIT: These write to reserved bits? */
-	omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
-	omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
-	omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
-
-	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
-	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
-
-	/* Workaround to kill USB */
-	l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
-	omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
-
-	/* One last check for pending IRQs to avoid extra latency due
-	 * to sleeping unnecessarily. */
-	if (omap_irq_pending())
-		goto no_sleep;
-
-	/* Jump to SRAM suspend code */
-	omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
-			   OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
-			   OMAP_SDRC_REGADDR(SDRC_POWER));
-
-no_sleep:
-	clk_enable(osc_ck);
-
-	/* clear CORE wake-up events */
-	omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
-	omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
-
-	/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
-	omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1);
-
-	/* MPU domain wake events */
-	omap_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, 0x1);
-
-	omap_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, 0x20);
-
-	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
-	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON);
-
-	return 0;
-}
-
-static int sti_console_enabled;
-
-static int omap2_allow_mpu_retention(void)
-{
-	if (!omap2xxx_cm_mpu_retention_allowed())
-		return 0;
-	if (sti_console_enabled)
-		return 0;
-
-	return 1;
-}
-
-static void omap2_enter_mpu_retention(void)
-{
-	const int zero = 0;
-
-	/* The peripherals seem not to be able to wake up the MPU when
-	 * it is in retention mode. */
-	if (omap2_allow_mpu_retention()) {
-		/* REVISIT: These write to reserved bits? */
-		omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
-		omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
-		omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
-
-		/* Try to enter MPU retention */
-		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
-
-	} else {
-		/* Block MPU retention */
-		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
-	}
-
-	/* WFI */
-	asm("mcr p15, 0, %0, c7, c0, 4" : : "r" (zero) : "memory", "cc");
-
-	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
-}
-
-static int omap2_can_sleep(void)
-{
-	if (omap2xxx_cm_fclks_active())
-		return 0;
-	if (__clk_is_enabled(osc_ck))
-		return 0;
-
-	return 1;
-}
-
-static void omap2_pm_idle(void)
-{
-	int error;
-
-	if (omap_irq_pending())
-		return;
-
-	error = cpu_cluster_pm_enter();
-	if (error || !omap2_can_sleep()) {
-		omap2_enter_mpu_retention();
-		goto out_cpu_cluster_pm;
-	}
-
-	omap2_enter_full_retention();
-
-out_cpu_cluster_pm:
-	cpu_cluster_pm_exit();
-}
-
-static void __init prcm_setup_regs(void)
-{
-	int i, num_mem_banks;
-	struct powerdomain *pwrdm;
-
-	/*
-	 * Enable autoidle
-	 * XXX This should be handled by hwmod code or PRCM init code
-	 */
-	omap2_prm_write_mod_reg(OMAP24XX_AUTOIDLE_MASK, OCP_MOD,
-			  OMAP2_PRCM_SYSCONFIG_OFFSET);
-
-	/*
-	 * Set CORE powerdomain memory banks to retain their contents
-	 * during RETENTION
-	 */
-	num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm);
-	for (i = 0; i < num_mem_banks; i++)
-		pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
-
-	pwrdm_set_logic_retst(core_pwrdm, PWRDM_POWER_RET);
-
-	pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
-
-	/* Force-power down DSP, GFX powerdomains */
-
-	pwrdm = clkdm_get_pwrdm(dsp_clkdm);
-	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
-
-	pwrdm = clkdm_get_pwrdm(gfx_clkdm);
-	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
-
-	/* Enable hardware-supervised idle for all clkdms */
-	clkdm_for_each(omap_pm_clkdms_setup, NULL);
-	clkdm_add_wkdep(mpu_clkdm, wkup_clkdm);
-
-	omap_common_suspend_init(omap2_enter_full_retention);
-
-	/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
-	 * stabilisation */
-	omap2_prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
-				OMAP2_PRCM_CLKSSETUP_OFFSET);
-
-	/* Configure automatic voltage transition */
-	omap2_prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
-				OMAP2_PRCM_VOLTSETUP_OFFSET);
-	omap2_prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT_MASK |
-				(0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
-				OMAP24XX_MEMRETCTRL_MASK |
-				(0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
-				(0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
-				OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
-
-	/* Enable wake-up events */
-	omap2_prm_write_mod_reg(OMAP24XX_EN_GPIOS_MASK | OMAP24XX_EN_GPT1_MASK,
-				WKUP_MOD, PM_WKEN);
-
-	/* Enable SYS_CLKEN control when all domains idle */
-	omap2_prm_set_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK, OMAP24XX_GR_MOD,
-				   OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
-}
-
-int __init omap2_pm_init(void)
-{
-	u32 l;
-
-	printk(KERN_INFO "Power Management for OMAP2 initializing\n");
-	l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
-	printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
-
-	/* Look up important powerdomains */
-
-	mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
-	if (!mpu_pwrdm)
-		pr_err("PM: mpu_pwrdm not found\n");
-
-	core_pwrdm = pwrdm_lookup("core_pwrdm");
-	if (!core_pwrdm)
-		pr_err("PM: core_pwrdm not found\n");
-
-	/* Look up important clockdomains */
-
-	mpu_clkdm = clkdm_lookup("mpu_clkdm");
-	if (!mpu_clkdm)
-		pr_err("PM: mpu_clkdm not found\n");
-
-	wkup_clkdm = clkdm_lookup("wkup_clkdm");
-	if (!wkup_clkdm)
-		pr_err("PM: wkup_clkdm not found\n");
-
-	dsp_clkdm = clkdm_lookup("dsp_clkdm");
-	if (!dsp_clkdm)
-		pr_err("PM: dsp_clkdm not found\n");
-
-	gfx_clkdm = clkdm_lookup("gfx_clkdm");
-	if (!gfx_clkdm)
-		pr_err("PM: gfx_clkdm not found\n");
-
-
-	osc_ck = clk_get(NULL, "osc_ck");
-	if (IS_ERR(osc_ck)) {
-		printk(KERN_ERR "could not get osc_ck\n");
-		return -ENODEV;
-	}
-
-	if (cpu_is_omap242x()) {
-		emul_ck = clk_get(NULL, "emul_ck");
-		if (IS_ERR(emul_ck)) {
-			printk(KERN_ERR "could not get emul_ck\n");
-			clk_put(osc_ck);
-			return -ENODEV;
-		}
-	}
-
-	prcm_setup_regs();
-
-	/*
-	 * We copy the assembler sleep/wakeup routines to SRAM.
-	 * These routines need to be in SRAM as that's the only
-	 * memory the MPU can see when it wakes up after the entire
-	 * chip enters idle.
-	 */
-	omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
-					    omap24xx_cpu_suspend_sz);
-
-	arm_pm_idle = omap2_pm_idle;
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
index 56f2c0bcae5a..c907478be196 100644
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -8,6 +8,7 @@
 
 #include <linux/cpuidle.h>
 #include <linux/platform_data/pm33xx.h>
+#include <linux/suspend.h>
 #include <asm/cpuidle.h>
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
@@ -15,7 +16,6 @@
 #include <linux/clk.h>
 #include <linux/cpu.h>
 #include <linux/platform_data/gpio-omap.h>
-#include <linux/pinctrl/pinmux.h>
 #include <linux/wkup_m3_ipc.h>
 #include <linux/of.h>
 #include <linux/rtc.h>
@@ -104,8 +104,6 @@ static int amx3_common_init(int (*idle)(u32 wfi_flags))
 
 static int am33xx_suspend_init(int (*idle)(u32 wfi_flags))
 {
-	int ret;
-
 	gfx_l4ls_clkdm = clkdm_lookup("gfx_l4ls_gfx_clkdm");
 
 	if (!gfx_l4ls_clkdm) {
@@ -113,9 +111,7 @@ static int am33xx_suspend_init(int (*idle)(u32 wfi_flags))
 		return -ENODEV;
 	}
 
-	ret = amx3_common_init(idle);
-
-	return ret;
+	return amx3_common_init(idle);
 }
 
 static int am43xx_suspend_init(int (*idle)(u32 wfi_flags))
@@ -324,6 +320,44 @@ static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void)
 		return NULL;
 }
 
+#ifdef CONFIG_SUSPEND
+/*
+ * Block system suspend initially. Later on pm33xx sets up it's own
+ * platform_suspend_ops after probe. That depends also on loaded
+ * wkup_m3_ipc and booted am335x-pm-firmware.elf.
+ */
+static int amx3_suspend_block(suspend_state_t state)
+{
+	pr_warn("PM not initialized for pm33xx, wkup_m3_ipc, or am335x-pm-firmware.elf\n");
+
+	return -EINVAL;
+}
+
+static int amx3_pm_valid(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static const struct platform_suspend_ops amx3_blocked_pm_ops = {
+	.begin = amx3_suspend_block,
+	.valid = amx3_pm_valid,
+};
+
+static void __init amx3_block_suspend(void)
+{
+	suspend_set_ops(&amx3_blocked_pm_ops);
+}
+#else
+static inline void amx3_block_suspend(void)
+{
+}
+#endif	/* CONFIG_SUSPEND */
+
 int __init amx3_common_pm_init(void)
 {
 	struct am33xx_pm_platform_data *pdata;
@@ -337,6 +371,7 @@ int __init amx3_common_pm_init(void)
 	devinfo.size_data = sizeof(*pdata);
 	devinfo.id = -1;
 	platform_device_register_full(&devinfo);
+	amx3_block_suspend();
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 71c1d18aafbc..68975771e633 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -26,7 +26,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/of.h>
-#include <linux/omap-gpmc.h>
+#include <linux/cpuidle.h>
 
 #include <trace/events/power.h>
 
@@ -81,8 +81,6 @@ static void omap3_core_save_context(void)
 
 	/* Save the Interrupt controller context */
 	omap_intc_save_context();
-	/* Save the GPMC context */
-	omap3_gpmc_save_context();
 	/* Save the system control module context, padconf already save above*/
 	omap3_control_save_context();
 }
@@ -91,8 +89,6 @@ static void omap3_core_restore_context(void)
 {
 	/* Restore the control module context, padconf restored by h/w */
 	omap3_control_restore_context();
-	/* Restore the GPMC context */
-	omap3_gpmc_restore_context();
 	/* Restore the interrupt controller context */
 	omap_intc_restore_context();
 }
@@ -179,7 +175,7 @@ static int omap34xx_do_sram_idle(unsigned long save_state)
 	return 0;
 }
 
-void omap_sram_idle(void)
+__cpuidle void omap_sram_idle(bool rcuidle)
 {
 	/* Variable to tell what needs to be saved and restored
 	 * in omap_sram_idle*/
@@ -259,11 +255,18 @@ void omap_sram_idle(void)
 	 */
 	if (save_state)
 		omap34xx_save_context(omap3_arm_context);
+
+	if (rcuidle)
+		ct_cpuidle_enter();
+
 	if (save_state == 1 || save_state == 3)
 		cpu_suspend(save_state, omap34xx_do_sram_idle);
 	else
 		omap34xx_do_sram_idle(save_state);
 
+	if (rcuidle)
+		ct_cpuidle_exit();
+
 	/* Restore normal SDRC POWER settings */
 	if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 &&
 	    (omap_type() == OMAP2_DEVICE_TYPE_EMU ||
@@ -299,7 +302,7 @@ static void omap3_pm_idle(void)
 	if (omap_irq_pending())
 		return;
 
-	omap_sram_idle();
+	omap3_do_wfi();
 }
 
 #ifdef CONFIG_SUSPEND
@@ -321,7 +324,7 @@ static int omap3_pm_suspend(void)
 
 	omap3_intc_suspend();
 
-	omap_sram_idle();
+	omap_sram_idle(false);
 
 restore:
 	/* Restore next_pwrsts */
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 5a7a949ae965..f57802f3ee3a 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -76,7 +76,7 @@ static int omap4_pm_suspend(void)
 	 * domain CSWR is not supported by hardware.
 	 * More details can be found in OMAP4430 TRM section 4.3.4.2.
 	 */
-	omap4_enter_lowpower(cpu_id, cpu_suspend_state);
+	omap4_enter_lowpower(cpu_id, cpu_suspend_state, false);
 
 	/* Restore next powerdomain state */
 	list_for_each_entry(pwrst, &pwrst_list, node) {
diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c
index 09076ad0576d..668dc84fd31e 100644
--- a/arch/arm/mach-omap2/pmic-cpcap.c
+++ b/arch/arm/mach-omap2/pmic-cpcap.c
@@ -246,10 +246,10 @@ int __init omap4_cpcap_init(void)
 	omap_voltage_register_pmic(voltdm, &omap443x_max8952_mpu);
 
 	if (of_machine_is_compatible("motorola,droid-bionic")) {
-		voltdm = voltdm_lookup("mpu");
+		voltdm = voltdm_lookup("core");
 		omap_voltage_register_pmic(voltdm, &omap_cpcap_core);
 
-		voltdm = voltdm_lookup("mpu");
+		voltdm = voltdm_lookup("iva");
 		omap_voltage_register_pmic(voltdm, &omap_cpcap_iva);
 	} else {
 		voltdm = voltdm_lookup("core");
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 1cbac76136d4..777f9f8e7cd8 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -37,8 +37,8 @@
 
 #define PWRDM_TRACE_STATES_FLAG	(1<<31)
 
-void pwrdms_save_context(void);
-void pwrdms_restore_context(void);
+static void pwrdms_save_context(void);
+static void pwrdms_restore_context(void);
 
 enum {
 	PWRDM_STATE_NOW = 0,
@@ -187,9 +187,9 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
 			trace_state = (PWRDM_TRACE_STATES_FLAG |
 				       ((next & OMAP_POWERSTATE_MASK) << 8) |
 				       ((prev & OMAP_POWERSTATE_MASK) << 0));
-			trace_power_domain_target_rcuidle(pwrdm->name,
-							  trace_state,
-							  raw_smp_processor_id());
+			trace_power_domain_target(pwrdm->name,
+						  trace_state,
+						  raw_smp_processor_id());
 		}
 		break;
 	default:
@@ -541,8 +541,8 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
 
 	if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
 		/* Trace the pwrdm desired target state */
-		trace_power_domain_target_rcuidle(pwrdm->name, pwrst,
-						  raw_smp_processor_id());
+		trace_power_domain_target(pwrdm->name, pwrst,
+					  raw_smp_processor_id());
 		/* Program the pwrdm desired target state */
 		ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst);
 	}
@@ -626,7 +626,7 @@ int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
  * powerdomain @pwrdm will enter when the powerdomain enters retention.
  * This will be either RETENTION or OFF, if supported.  Returns
  * -EINVAL if the powerdomain pointer is null or the target power
- * state is not not supported, or returns 0 upon success.
+ * state is not supported, or returns 0 upon success.
  */
 int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
 {
@@ -658,7 +658,7 @@ int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
  * state.  @bank will be a number from 0 to 3, and represents different
  * types of memory, depending on the powerdomain.  Returns -EINVAL if
  * the powerdomain pointer is null or the target power state is not
- * not supported for this memory bank, -EEXIST if the target memory
+ * supported for this memory bank, -EEXIST if the target memory
  * bank does not exist or is not controllable, or returns 0 upon
  * success.
  */
@@ -696,7 +696,7 @@ int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
  * different types of memory, depending on the powerdomain.  @pwrst
  * will be either RETENTION or OFF, if supported.  Returns -EINVAL if
  * the powerdomain pointer is null or the target power state is not
- * not supported for this memory bank, -EEXIST if the target memory
+ * supported for this memory bank, -EEXIST if the target memory
  * bank does not exist or is not controllable, or returns 0 upon
  * success.
  */
@@ -1149,82 +1149,6 @@ osps_out:
 }
 
 /**
- * pwrdm_get_context_loss_count - get powerdomain's context loss count
- * @pwrdm: struct powerdomain * to wait for
- *
- * Context loss count is the sum of powerdomain off-mode counter, the
- * logic off counter and the per-bank memory off counter.  Returns negative
- * (and WARNs) upon error, otherwise, returns the context loss count.
- */
-int pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
-{
-	int i, count;
-
-	if (!pwrdm) {
-		WARN(1, "powerdomain: %s: pwrdm is null\n", __func__);
-		return -ENODEV;
-	}
-
-	count = pwrdm->state_counter[PWRDM_POWER_OFF];
-	count += pwrdm->ret_logic_off_counter;
-
-	for (i = 0; i < pwrdm->banks; i++)
-		count += pwrdm->ret_mem_off_counter[i];
-
-	/*
-	 * Context loss count has to be a non-negative value. Clear the sign
-	 * bit to get a value range from 0 to INT_MAX.
-	 */
-	count &= INT_MAX;
-
-	pr_debug("powerdomain: %s: context loss count = %d\n",
-		 pwrdm->name, count);
-
-	return count;
-}
-
-/**
- * pwrdm_can_ever_lose_context - can this powerdomain ever lose context?
- * @pwrdm: struct powerdomain *
- *
- * Given a struct powerdomain * @pwrdm, returns 1 if the powerdomain
- * can lose either memory or logic context or if @pwrdm is invalid, or
- * returns 0 otherwise.  This function is not concerned with how the
- * powerdomain registers are programmed (i.e., to go off or not); it's
- * concerned with whether it's ever possible for this powerdomain to
- * go off while some other part of the chip is active.  This function
- * assumes that every powerdomain can go to either ON or INACTIVE.
- */
-bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm)
-{
-	int i;
-
-	if (!pwrdm) {
-		pr_debug("powerdomain: %s: invalid powerdomain pointer\n",
-			 __func__);
-		return 1;
-	}
-
-	if (pwrdm->pwrsts & PWRSTS_OFF)
-		return 1;
-
-	if (pwrdm->pwrsts & PWRSTS_RET) {
-		if (pwrdm->pwrsts_logic_ret & PWRSTS_OFF)
-			return 1;
-
-		for (i = 0; i < pwrdm->banks; i++)
-			if (pwrdm->pwrsts_mem_ret[i] & PWRSTS_OFF)
-				return 1;
-	}
-
-	for (i = 0; i < pwrdm->banks; i++)
-		if (pwrdm->pwrsts_mem_on[i] & PWRSTS_OFF)
-			return 1;
-
-	return 0;
-}
-
-/**
  * pwrdm_save_context - save powerdomain registers
  *
  * Register state is going to be lost due to a suspend or hibernate
@@ -1250,36 +1174,12 @@ static int pwrdm_restore_context(struct powerdomain *pwrdm, void *unused)
 	return 0;
 }
 
-static int pwrdm_lost_power(struct powerdomain *pwrdm, void *unused)
-{
-	int state;
-
-	/*
-	 * Power has been lost across all powerdomains, increment the
-	 * counter.
-	 */
-
-	state = pwrdm_read_pwrst(pwrdm);
-	if (state != PWRDM_POWER_OFF) {
-		pwrdm->state_counter[state]++;
-		pwrdm->state_counter[PWRDM_POWER_OFF]++;
-	}
-	pwrdm->state = state;
-
-	return 0;
-}
-
-void pwrdms_save_context(void)
+static void pwrdms_save_context(void)
 {
 	pwrdm_for_each(pwrdm_save_context, NULL);
 }
 
-void pwrdms_restore_context(void)
+static void pwrdms_restore_context(void)
 {
 	pwrdm_for_each(pwrdm_restore_context, NULL);
 }
-
-void pwrdms_lost_power(void)
-{
-	pwrdm_for_each(pwrdm_lost_power, NULL);
-}
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index 907cc659f47a..fbc89999460b 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -208,8 +208,6 @@ struct powerdomain *pwrdm_lookup(const char *name);
 
 int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
 			void *user);
-int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
-			void *user);
 
 int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
 
@@ -243,8 +241,6 @@ int pwrdm_state_switch_nolock(struct powerdomain *pwrdm);
 int pwrdm_state_switch(struct powerdomain *pwrdm);
 int pwrdm_pre_transition(struct powerdomain *pwrdm);
 int pwrdm_post_transition(struct powerdomain *pwrdm);
-int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
-bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
 
 extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 state);
 
@@ -273,8 +269,4 @@ extern struct powerdomain gfx_omap2_pwrdm;
 extern void pwrdm_lock(struct powerdomain *pwrdm);
 extern void pwrdm_unlock(struct powerdomain *pwrdm);
 
-extern void pwrdms_save_context(void);
-extern void pwrdms_restore_context(void);
-
-extern void pwrdms_lost_power(void);
 #endif
diff --git a/arch/arm/mach-omap2/powerdomains33xx_data.c b/arch/arm/mach-omap2/powerdomains33xx_data.c
index 626055e59aed..1d58fd1a2dce 100644
--- a/arch/arm/mach-omap2/powerdomains33xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains33xx_data.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * AM33XX Power domain data
  *
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 48e804c93caf..5e3544a63526 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -550,7 +550,6 @@ struct omap_prcm_init_data {
 	struct device_node *np;
 };
 
-extern void omap_prcm_irq_cleanup(void);
 extern int omap_prcm_register_chain_handler(
 	struct omap_prcm_irq_setup *irq_setup);
 extern int omap_prcm_event_to_irq(const char *event);
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index 899da0ae9800..38ed69b150cb 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * AM43x PRCM defines
  *
  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_PRCM_43XX_H
@@ -32,20 +29,8 @@
 /* Other PRM offsets */
 #define AM43XX_PRM_IO_PMCTRL_OFFSET			0x0024
 
-/* RM RSTCTRL offsets */
-#define AM43XX_RM_PER_RSTCTRL_OFFSET			0x0010
-#define AM43XX_RM_GFX_RSTCTRL_OFFSET			0x0010
-#define AM43XX_RM_WKUP_RSTCTRL_OFFSET			0x0010
-
-/* RM RSTST offsets */
-#define AM43XX_RM_GFX_RSTST_OFFSET			0x0014
-#define AM43XX_RM_PER_RSTST_OFFSET			0x0014
-#define AM43XX_RM_WKUP_RSTST_OFFSET			0x0014
-
 /* CM instances */
 #define AM43XX_CM_WKUP_INST				0x2800
-#define AM43XX_CM_DEVICE_INST				0x4100
-#define AM43XX_CM_DPLL_INST				0x4200
 #define AM43XX_CM_MPU_INST				0x8300
 #define AM43XX_CM_GFX_INST				0x8400
 #define AM43XX_CM_RTC_INST				0x8500
@@ -74,89 +59,7 @@
 #define AM43XX_CM_PER_OCPWP_L3_CDOFFS			0x0c00
 
 /* CLK CTRL offsets */
-#define AM43XX_CM_PER_UART1_CLKCTRL_OFFSET		0x0580
-#define AM43XX_CM_PER_UART2_CLKCTRL_OFFSET		0x0588
-#define AM43XX_CM_PER_UART3_CLKCTRL_OFFSET		0x0590
-#define AM43XX_CM_PER_UART4_CLKCTRL_OFFSET		0x0598
-#define AM43XX_CM_PER_UART5_CLKCTRL_OFFSET		0x05a0
-#define AM43XX_CM_PER_DCAN0_CLKCTRL_OFFSET		0x0428
-#define AM43XX_CM_PER_DCAN1_CLKCTRL_OFFSET		0x0430
-#define AM43XX_CM_PER_ELM_CLKCTRL_OFFSET		0x0468
-#define AM43XX_CM_PER_EPWMSS0_CLKCTRL_OFFSET		0x0438
-#define AM43XX_CM_PER_EPWMSS1_CLKCTRL_OFFSET		0x0440
-#define AM43XX_CM_PER_EPWMSS2_CLKCTRL_OFFSET		0x0448
-#define AM43XX_CM_PER_GPIO1_CLKCTRL_OFFSET		0x0478
-#define AM43XX_CM_PER_GPIO2_CLKCTRL_OFFSET		0x0480
-#define AM43XX_CM_PER_GPIO3_CLKCTRL_OFFSET		0x0488
-#define AM43XX_CM_PER_I2C1_CLKCTRL_OFFSET		0x04a8
-#define AM43XX_CM_PER_I2C2_CLKCTRL_OFFSET		0x04b0
-#define AM43XX_CM_PER_MAILBOX0_CLKCTRL_OFFSET		0x04b8
-#define AM43XX_CM_PER_MMC0_CLKCTRL_OFFSET		0x04c0
-#define AM43XX_CM_PER_MMC1_CLKCTRL_OFFSET		0x04c8
-#define AM43XX_CM_PER_RNG_CLKCTRL_OFFSET		0x04e0
-#define AM43XX_CM_PER_SPI0_CLKCTRL_OFFSET		0x0500
-#define AM43XX_CM_PER_SPI1_CLKCTRL_OFFSET		0x0508
-#define AM43XX_CM_PER_SPINLOCK_CLKCTRL_OFFSET		0x0528
-#define AM43XX_CM_PER_TIMER2_CLKCTRL_OFFSET		0x0530
-#define AM43XX_CM_PER_TIMER3_CLKCTRL_OFFSET		0x0538
-#define AM43XX_CM_PER_TIMER4_CLKCTRL_OFFSET		0x0540
-#define AM43XX_CM_PER_TIMER5_CLKCTRL_OFFSET		0x0548
-#define AM43XX_CM_PER_TIMER6_CLKCTRL_OFFSET		0x0550
-#define AM43XX_CM_PER_TIMER7_CLKCTRL_OFFSET		0x0558
-#define AM43XX_CM_WKUP_WKUP_M3_CLKCTRL_OFFSET		0x0228
-#define AM43XX_CM_WKUP_CONTROL_CLKCTRL_OFFSET		0x0360
-#define AM43XX_CM_WKUP_SMARTREFLEX0_CLKCTRL_OFFSET	0x0350
-#define AM43XX_CM_WKUP_SMARTREFLEX1_CLKCTRL_OFFSET	0x0358
-#define AM43XX_CM_WKUP_UART0_CLKCTRL_OFFSET		0x0348
-#define AM43XX_CM_WKUP_TIMER1_CLKCTRL_OFFSET		0x0328
-#define AM43XX_CM_WKUP_I2C0_CLKCTRL_OFFSET		0x0340
-#define AM43XX_CM_WKUP_GPIO0_CLKCTRL_OFFSET		0x0368
-#define AM43XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET		0x0120
-#define AM43XX_CM_WKUP_WDT1_CLKCTRL_OFFSET		0x0338
-#define AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET		0x0220
-#define AM43XX_CM_RTC_RTC_CLKCTRL_OFFSET		0x0020
-#define AM43XX_CM_PER_MMC2_CLKCTRL_OFFSET		0x0248
-#define AM43XX_CM_PER_QSPI_CLKCTRL_OFFSET               0x0258
-#define AM43XX_CM_PER_GPMC_CLKCTRL_OFFSET		0x0220
-#define AM43XX_CM_PER_MCASP0_CLKCTRL_OFFSET		0x0238
-#define AM43XX_CM_PER_MCASP1_CLKCTRL_OFFSET		0x0240
-#define AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET		0x0420
-#define AM43XX_CM_PER_L3_CLKCTRL_OFFSET			0x0020
-#define AM43XX_CM_PER_TPCC_CLKCTRL_OFFSET		0x0078
-#define AM43XX_CM_PER_TPTC0_CLKCTRL_OFFSET		0x0080
-#define AM43XX_CM_PER_TPTC1_CLKCTRL_OFFSET		0x0088
-#define AM43XX_CM_PER_TPTC2_CLKCTRL_OFFSET		0x0090
-#define AM43XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET		0x0b20
-#define AM43XX_CM_PER_PRUSS_CLKCTRL_OFFSET		0x0320
-#define AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET		0x0020
-#define AM43XX_CM_PER_L4HS_CLKCTRL_OFFSET		0x00a0
 #define AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET		0x0020
-#define AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET		0x0040
-#define AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET		0x0050
-#define AM43XX_CM_PER_SHA0_CLKCTRL_OFFSET		0x0058
-#define AM43XX_CM_PER_AES0_CLKCTRL_OFFSET		0x0028
-#define AM43XX_CM_PER_DES_CLKCTRL_OFFSET		0x0030
-#define AM43XX_CM_PER_TIMER8_CLKCTRL_OFFSET		0x0560
-#define AM43XX_CM_PER_TIMER9_CLKCTRL_OFFSET		0x0568
-#define AM43XX_CM_PER_TIMER10_CLKCTRL_OFFSET		0x0570
-#define AM43XX_CM_PER_TIMER11_CLKCTRL_OFFSET		0x0578
-#define AM43XX_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET		0x0230
-#define AM43XX_CM_PER_EPWMSS3_CLKCTRL_OFFSET		0x0450
-#define AM43XX_CM_PER_EPWMSS4_CLKCTRL_OFFSET		0x0458
-#define AM43XX_CM_PER_EPWMSS5_CLKCTRL_OFFSET		0x0460
-#define AM43XX_CM_PER_SPI2_CLKCTRL_OFFSET		0x0510
-#define AM43XX_CM_PER_SPI3_CLKCTRL_OFFSET		0x0518
-#define AM43XX_CM_PER_SPI4_CLKCTRL_OFFSET		0x0520
-#define AM43XX_CM_PER_GPIO4_CLKCTRL_OFFSET		0x0490
-#define AM43XX_CM_PER_GPIO5_CLKCTRL_OFFSET		0x0498
-#define AM43XX_CM_PER_USB_OTG_SS0_CLKCTRL_OFFSET	0x0260
-#define AM43XX_CM_PER_USBPHYOCP2SCP0_CLKCTRL_OFFSET	0x05B8
-#define AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET        0x0268
-#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET	0x05C0
-#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET		0x0a20
-#define AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET		0x04a0
-#define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET		0x0068
-#define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET		0x0070
 #define AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET		0x0720
 
 #endif
diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c
index 5add541e3b41..7236c50388a8 100644
--- a/arch/arm/mach-omap2/prcm_mpu44xx.c
+++ b/arch/arm/mach-omap2/prcm_mpu44xx.c
@@ -35,18 +35,6 @@ void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 reg)
 	writel_relaxed(val, OMAP44XX_PRCM_MPU_REGADDR(inst, reg));
 }
 
-u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
-{
-	u32 v;
-
-	v = omap4_prcm_mpu_read_inst_reg(inst, reg);
-	v &= ~mask;
-	v |= bits;
-	omap4_prcm_mpu_write_inst_reg(v, inst, reg);
-
-	return v;
-}
-
 /**
  * omap2_set_globals_prcm_mpu - set the MPU PRCM base address (for early use)
  * @prcm_mpu: PRCM_MPU base virtual address
diff --git a/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h b/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h
index 7c6377566f33..0c519447e790 100644
--- a/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h
+++ b/arch/arm/mach-omap2/prcm_mpu_44xx_54xx.h
@@ -26,8 +26,6 @@ extern struct omap_domain_base prcm_mpu_base;
 
 extern u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 idx);
 extern void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 idx);
-extern u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst,
-					    s16 idx);
 extern void __init omap2_set_globals_prcm_mpu(void __iomem *prcm_mpu);
 #endif
 
diff --git a/arch/arm/mach-omap2/prm-regbits-33xx.h b/arch/arm/mach-omap2/prm-regbits-33xx.h
index 7dfdff09ddeb..3748c5266ae1 100644
--- a/arch/arm/mach-omap2/prm-regbits-33xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-33xx.h
@@ -1,16 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * AM33XX PRM_XXX register bits
  *
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_33XX_H
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 08df78810a5e..fc45a7ed09bb 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -15,9 +15,7 @@
 # ifndef __ASSEMBLER__
 extern struct omap_domain_base prm_base;
 extern u16 prm_features;
-extern void omap2_set_globals_prm(void __iomem *prm);
 int omap_prcm_init(void);
-int omap2_prm_base_init(void);
 int omap2_prcm_base_init(void);
 # endif
 
@@ -156,12 +154,10 @@ int omap_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset);
 int omap_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 prm_mod,
 				u16 offset, u16 st_offset);
 int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset);
-extern u32 prm_read_reset_sources(void);
 extern bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx);
 extern void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx);
 void omap_prm_reset_system(void);
 
-void omap_prm_reconfigure_io_chain(void);
 int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
 
 /*
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index 3d803f7182b9..bc263d564acc 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -104,9 +104,6 @@ int omap2_prm_deassert_hardreset(u8 rst_shift, u8 st_shift, u8 part,
 				 s16 prm_mod, u16 reset_offset,
 				 u16 st_offset);
 
-extern int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
-extern int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
-extern int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm);
 extern int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
 				    u8 pwrst);
 extern int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c
index 9144cc0479af..4b65a0f9cf7d 100644
--- a/arch/arm/mach-omap2/prm33xx.c
+++ b/arch/arm/mach-omap2/prm33xx.c
@@ -1,16 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * AM33XX PRM functions
  *
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h
index d0b7404565f1..3081f3deb650 100644
--- a/arch/arm/mach-omap2/prm33xx.h
+++ b/arch/arm/mach-omap2/prm33xx.h
@@ -1,16 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * AM33XX PRM instance offset macros
  *
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_PRM33XX_H
@@ -35,63 +27,27 @@
 #define AM33XX_PRM_GFX_MOD		0x1100
 #define AM33XX_PRM_CEFUSE_MOD		0x1200
 
-/* PRM */
-
-/* PRM.OCP_SOCKET_PRM register offsets */
-#define AM33XX_REVISION_PRM_OFFSET		0x0000
-#define AM33XX_REVISION_PRM			AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0000)
-#define AM33XX_PRM_IRQSTATUS_MPU_OFFSET		0x0004
-#define AM33XX_PRM_IRQSTATUS_MPU		AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0004)
-#define AM33XX_PRM_IRQENABLE_MPU_OFFSET		0x0008
-#define AM33XX_PRM_IRQENABLE_MPU		AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0008)
-#define AM33XX_PRM_IRQSTATUS_M3_OFFSET		0x000c
-#define AM33XX_PRM_IRQSTATUS_M3			AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x000c)
-#define AM33XX_PRM_IRQENABLE_M3_OFFSET		0x0010
-#define AM33XX_PRM_IRQENABLE_M3			AM33XX_PRM_REGADDR(AM33XX_PRM_OCP_SOCKET_MOD, 0x0010)
-
 /* PRM.PER_PRM register offsets */
-#define AM33XX_RM_PER_RSTCTRL_OFFSET		0x0000
-#define AM33XX_RM_PER_RSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0000)
 #define AM33XX_PM_PER_PWRSTST_OFFSET		0x0008
 #define AM33XX_PM_PER_PWRSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0008)
 #define AM33XX_PM_PER_PWRSTCTRL_OFFSET		0x000c
 #define AM33XX_PM_PER_PWRSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x000c)
 
 /* PRM.WKUP_PRM register offsets */
-#define AM33XX_RM_WKUP_RSTCTRL_OFFSET		0x0000
-#define AM33XX_RM_WKUP_RSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0000)
 #define AM33XX_PM_WKUP_PWRSTCTRL_OFFSET		0x0004
 #define AM33XX_PM_WKUP_PWRSTCTRL		AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0004)
 #define AM33XX_PM_WKUP_PWRSTST_OFFSET		0x0008
 #define AM33XX_PM_WKUP_PWRSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x0008)
-#define AM33XX_RM_WKUP_RSTST_OFFSET		0x000c
-#define AM33XX_RM_WKUP_RSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_WKUP_MOD, 0x000c)
 
 /* PRM.MPU_PRM register offsets */
 #define AM33XX_PM_MPU_PWRSTCTRL_OFFSET		0x0000
 #define AM33XX_PM_MPU_PWRSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0000)
 #define AM33XX_PM_MPU_PWRSTST_OFFSET		0x0004
 #define AM33XX_PM_MPU_PWRSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0004)
-#define AM33XX_RM_MPU_RSTST_OFFSET		0x0008
-#define AM33XX_RM_MPU_RSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_MPU_MOD, 0x0008)
 
 /* PRM.DEVICE_PRM register offsets */
 #define AM33XX_PRM_RSTCTRL_OFFSET		0x0000
 #define AM33XX_PRM_RSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0000)
-#define AM33XX_PRM_RSTTIME_OFFSET		0x0004
-#define AM33XX_PRM_RSTTIME			AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0004)
-#define AM33XX_PRM_RSTST_OFFSET			0x0008
-#define AM33XX_PRM_RSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0008)
-#define AM33XX_PRM_SRAM_COUNT_OFFSET		0x000c
-#define AM33XX_PRM_SRAM_COUNT			AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x000c)
-#define AM33XX_PRM_LDO_SRAM_CORE_SETUP_OFFSET	0x0010
-#define AM33XX_PRM_LDO_SRAM_CORE_SETUP		AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0010)
-#define AM33XX_PRM_LDO_SRAM_CORE_CTRL_OFFSET	0x0014
-#define AM33XX_PRM_LDO_SRAM_CORE_CTRL		AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0014)
-#define AM33XX_PRM_LDO_SRAM_MPU_SETUP_OFFSET	0x0018
-#define AM33XX_PRM_LDO_SRAM_MPU_SETUP		AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x0018)
-#define AM33XX_PRM_LDO_SRAM_MPU_CTRL_OFFSET	0x001c
-#define AM33XX_PRM_LDO_SRAM_MPU_CTRL		AM33XX_PRM_REGADDR(AM33XX_PRM_DEVICE_MOD, 0x001c)
 
 /* PRM.RTC_PRM register offsets */
 #define AM33XX_PM_RTC_PWRSTCTRL_OFFSET		0x0000
@@ -102,12 +58,8 @@
 /* PRM.GFX_PRM register offsets */
 #define AM33XX_PM_GFX_PWRSTCTRL_OFFSET		0x0000
 #define AM33XX_PM_GFX_PWRSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0000)
-#define AM33XX_RM_GFX_RSTCTRL_OFFSET		0x0004
-#define AM33XX_RM_GFX_RSTCTRL			AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0004)
 #define AM33XX_PM_GFX_PWRSTST_OFFSET		0x0010
 #define AM33XX_PM_GFX_PWRSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0010)
-#define AM33XX_RM_GFX_RSTST_OFFSET		0x0014
-#define AM33XX_RM_GFX_RSTST			AM33XX_PRM_REGADDR(AM33XX_PRM_GFX_MOD, 0x0014)
 
 /* PRM.CEFUSE_PRM register offsets */
 #define AM33XX_PM_CEFUSE_PWRSTCTRL_OFFSET	0x0000
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 1b442b128569..1b5d08f594aa 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -32,6 +32,7 @@ static void omap3xxx_prm_read_pending_irqs(unsigned long *events);
 static void omap3xxx_prm_ocp_barrier(void);
 static void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
 static void omap3xxx_prm_restore_irqen(u32 *saved_mask);
+static void omap3xxx_prm_iva_idle(void);
 
 static const struct omap_prcm_irq omap3_prcm_irqs[] = {
 	OMAP_PRCM_IRQ("wkup",	0,	0),
@@ -268,7 +269,7 @@ static int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
  * Toggles the reset signal to modem IP block. Required to allow
  * OMAP3430 without stacked modem to idle properly.
  */
-void __init omap3_prm_reset_modem(void)
+static void __init omap3_prm_reset_modem(void)
 {
 	omap2_prm_write_mod_reg(
 		OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
@@ -469,7 +470,7 @@ static u32 omap3xxx_prm_read_reset_sources(void)
  * function forces the IVA2 into idle state so it can go
  * into retention/off and thus allow full-chip retention/off.
  */
-void omap3xxx_prm_iva_idle(void)
+static void omap3xxx_prm_iva_idle(void)
 {
 	/* ensure IVA2 clock is disabled */
 	omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
@@ -708,6 +709,7 @@ static int omap3xxx_prm_late_init(void)
 	}
 
 	irq_num = of_irq_get(np, 0);
+	of_node_put(np);
 	if (irq_num == -EPROBE_DEFER)
 		return irq_num;
 
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index ed7c389aa5a7..ab899e461c62 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -138,8 +138,6 @@ extern void omap3_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
 int __init omap3xxx_prm_init(const struct omap_prcm_init_data *data);
-void omap3xxx_prm_iva_idle(void);
-void omap3_prm_reset_modem(void);
 int omap3xxx_prm_clear_global_cold_reset(void);
 void omap3_prm_save_scratchpad_contents(u32 *ptr);
 void omap3_prm_init_pm(bool has_uart4, bool has_iva);
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 1006d3c8c42e..fc7d4ed0bd9b 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -51,694 +51,64 @@
 #define OMAP4430_PRM_EMU_INST		0x1900
 #define OMAP4430_PRM_EMU_CM_INST	0x1a00
 #define OMAP4430_PRM_DEVICE_INST	0x1b00
-#define OMAP4430_PRM_INSTR_INST		0x1f00
 
 /* PRM clockdomain register offsets (from instance start) */
 #define OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS	0x0000
 #define OMAP4430_PRM_EMU_CM_EMU_CDOFFS		0x0000
 
 /* OMAP4 specific register offsets */
-#define OMAP4_RM_RSTCTRL				0x0000
 #define OMAP4_RM_RSTST					0x0004
-#define OMAP4_RM_RSTTIME				0x0008
 #define OMAP4_PM_PWSTCTRL				0x0000
 #define OMAP4_PM_PWSTST					0x0004
 
-
-/* PRM */
-
 /* PRM.OCP_SOCKET_PRM register offsets */
 #define OMAP4_REVISION_PRM_OFFSET			0x0000
-#define OMAP4430_REVISION_PRM				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0000)
 #define OMAP4_PRM_IRQSTATUS_MPU_OFFSET			0x0010
 #define OMAP4430_PRM_IRQSTATUS_MPU			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0010)
 #define OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET		0x0014
-#define OMAP4430_PRM_IRQSTATUS_MPU_2			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0014)
 #define OMAP4_PRM_IRQENABLE_MPU_OFFSET			0x0018
 #define OMAP4430_PRM_IRQENABLE_MPU			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0018)
-#define OMAP4_PRM_IRQENABLE_MPU_2_OFFSET		0x001c
-#define OMAP4430_PRM_IRQENABLE_MPU_2			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x001c)
-#define OMAP4_PRM_IRQSTATUS_DUCATI_OFFSET		0x0020
-#define OMAP4430_PRM_IRQSTATUS_DUCATI			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0020)
-#define OMAP4_PRM_IRQENABLE_DUCATI_OFFSET		0x0028
-#define OMAP4430_PRM_IRQENABLE_DUCATI			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0028)
-#define OMAP4_PRM_IRQSTATUS_TESLA_OFFSET		0x0030
-#define OMAP4430_PRM_IRQSTATUS_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0030)
-#define OMAP4_PRM_IRQENABLE_TESLA_OFFSET		0x0038
-#define OMAP4430_PRM_IRQENABLE_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0038)
-#define OMAP4_CM_PRM_PROFILING_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_PRM_PROFILING_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0040)
-
-/* PRM.CKGEN_PRM register offsets */
-#define OMAP4_CM_ABE_DSS_SYS_CLKSEL_OFFSET		0x0000
-#define OMAP4430_CM_ABE_DSS_SYS_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_INST, 0x0000)
-#define OMAP4_CM_L4_WKUP_CLKSEL_OFFSET			0x0008
-#define OMAP4430_CM_L4_WKUP_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_INST, 0x0008)
-#define OMAP4_CM_ABE_PLL_REF_CLKSEL_OFFSET		0x000c
-#define OMAP4430_CM_ABE_PLL_REF_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_INST, 0x000c)
-#define OMAP4_CM_SYS_CLKSEL_OFFSET			0x0010
-#define OMAP4430_CM_SYS_CLKSEL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_INST, 0x0010)
 
 /* PRM.MPU_PRM register offsets */
-#define OMAP4_PM_MPU_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_MPU_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_INST, 0x0000)
-#define OMAP4_PM_MPU_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_MPU_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_INST, 0x0004)
-#define OMAP4_RM_MPU_RSTST_OFFSET			0x0014
-#define OMAP4430_RM_MPU_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_INST, 0x0014)
 #define OMAP4_RM_MPU_MPU_CONTEXT_OFFSET			0x0024
-#define OMAP4430_RM_MPU_MPU_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_INST, 0x0024)
-
-/* PRM.TESLA_PRM register offsets */
-#define OMAP4_PM_TESLA_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_TESLA_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0000)
-#define OMAP4_PM_TESLA_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_TESLA_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0004)
-#define OMAP4_RM_TESLA_RSTCTRL_OFFSET			0x0010
-#define OMAP4430_RM_TESLA_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0010)
-#define OMAP4_RM_TESLA_RSTST_OFFSET			0x0014
-#define OMAP4430_RM_TESLA_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0014)
-#define OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_TESLA_TESLA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0024)
-
-/* PRM.ABE_PRM register offsets */
-#define OMAP4_PM_ABE_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_ABE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0000)
-#define OMAP4_PM_ABE_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_ABE_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0004)
-#define OMAP4_RM_ABE_AESS_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_ABE_AESS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x002c)
-#define OMAP4_PM_ABE_PDM_WKDEP_OFFSET			0x0030
-#define OMAP4430_PM_ABE_PDM_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0030)
-#define OMAP4_RM_ABE_PDM_CONTEXT_OFFSET			0x0034
-#define OMAP4430_RM_ABE_PDM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0034)
-#define OMAP4_PM_ABE_DMIC_WKDEP_OFFSET			0x0038
-#define OMAP4430_PM_ABE_DMIC_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0038)
-#define OMAP4_RM_ABE_DMIC_CONTEXT_OFFSET		0x003c
-#define OMAP4430_RM_ABE_DMIC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x003c)
-#define OMAP4_PM_ABE_MCASP_WKDEP_OFFSET			0x0040
-#define OMAP4430_PM_ABE_MCASP_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0040)
-#define OMAP4_RM_ABE_MCASP_CONTEXT_OFFSET		0x0044
-#define OMAP4430_RM_ABE_MCASP_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0044)
-#define OMAP4_PM_ABE_MCBSP1_WKDEP_OFFSET		0x0048
-#define OMAP4430_PM_ABE_MCBSP1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0048)
-#define OMAP4_RM_ABE_MCBSP1_CONTEXT_OFFSET		0x004c
-#define OMAP4430_RM_ABE_MCBSP1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x004c)
-#define OMAP4_PM_ABE_MCBSP2_WKDEP_OFFSET		0x0050
-#define OMAP4430_PM_ABE_MCBSP2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0050)
-#define OMAP4_RM_ABE_MCBSP2_CONTEXT_OFFSET		0x0054
-#define OMAP4430_RM_ABE_MCBSP2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0054)
-#define OMAP4_PM_ABE_MCBSP3_WKDEP_OFFSET		0x0058
-#define OMAP4430_PM_ABE_MCBSP3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0058)
-#define OMAP4_RM_ABE_MCBSP3_CONTEXT_OFFSET		0x005c
-#define OMAP4430_RM_ABE_MCBSP3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x005c)
-#define OMAP4_PM_ABE_SLIMBUS_WKDEP_OFFSET		0x0060
-#define OMAP4430_PM_ABE_SLIMBUS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0060)
-#define OMAP4_RM_ABE_SLIMBUS_CONTEXT_OFFSET		0x0064
-#define OMAP4430_RM_ABE_SLIMBUS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0064)
-#define OMAP4_PM_ABE_TIMER5_WKDEP_OFFSET		0x0068
-#define OMAP4430_PM_ABE_TIMER5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0068)
-#define OMAP4_RM_ABE_TIMER5_CONTEXT_OFFSET		0x006c
-#define OMAP4430_RM_ABE_TIMER5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x006c)
-#define OMAP4_PM_ABE_TIMER6_WKDEP_OFFSET		0x0070
-#define OMAP4430_PM_ABE_TIMER6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0070)
-#define OMAP4_RM_ABE_TIMER6_CONTEXT_OFFSET		0x0074
-#define OMAP4430_RM_ABE_TIMER6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0074)
-#define OMAP4_PM_ABE_TIMER7_WKDEP_OFFSET		0x0078
-#define OMAP4430_PM_ABE_TIMER7_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0078)
-#define OMAP4_RM_ABE_TIMER7_CONTEXT_OFFSET		0x007c
-#define OMAP4430_RM_ABE_TIMER7_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x007c)
-#define OMAP4_PM_ABE_TIMER8_WKDEP_OFFSET		0x0080
-#define OMAP4430_PM_ABE_TIMER8_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0080)
-#define OMAP4_RM_ABE_TIMER8_CONTEXT_OFFSET		0x0084
-#define OMAP4430_RM_ABE_TIMER8_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0084)
-#define OMAP4_PM_ABE_WDT3_WKDEP_OFFSET			0x0088
-#define OMAP4430_PM_ABE_WDT3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0088)
-#define OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET		0x008c
-#define OMAP4430_RM_ABE_WDT3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x008c)
-
-/* PRM.ALWAYS_ON_PRM register offsets */
-#define OMAP4_RM_ALWON_MDMINTC_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_ALWON_MDMINTC_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0024)
-#define OMAP4_PM_ALWON_SR_MPU_WKDEP_OFFSET		0x0028
-#define OMAP4430_PM_ALWON_SR_MPU_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0028)
-#define OMAP4_RM_ALWON_SR_MPU_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_ALWON_SR_MPU_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x002c)
-#define OMAP4_PM_ALWON_SR_IVA_WKDEP_OFFSET		0x0030
-#define OMAP4430_PM_ALWON_SR_IVA_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0030)
-#define OMAP4_RM_ALWON_SR_IVA_CONTEXT_OFFSET		0x0034
-#define OMAP4430_RM_ALWON_SR_IVA_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0034)
-#define OMAP4_PM_ALWON_SR_CORE_WKDEP_OFFSET		0x0038
-#define OMAP4430_PM_ALWON_SR_CORE_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0038)
-#define OMAP4_RM_ALWON_SR_CORE_CONTEXT_OFFSET		0x003c
-#define OMAP4430_RM_ALWON_SR_CORE_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x003c)
-
-/* PRM.CORE_PRM register offsets */
-#define OMAP4_PM_CORE_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_CORE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0000)
-#define OMAP4_PM_CORE_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_CORE_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0004)
-#define OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_L3_1_L3_1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0024)
-#define OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET		0x0124
-#define OMAP4430_RM_L3_2_L3_2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0124)
-#define OMAP4_RM_L3_2_GPMC_CONTEXT_OFFSET		0x012c
-#define OMAP4430_RM_L3_2_GPMC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x012c)
-#define OMAP4_RM_L3_2_OCMC_RAM_CONTEXT_OFFSET		0x0134
-#define OMAP4430_RM_L3_2_OCMC_RAM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0134)
-#define OMAP4_RM_DUCATI_RSTCTRL_OFFSET			0x0210
-#define OMAP4430_RM_DUCATI_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0210)
-#define OMAP4_RM_DUCATI_RSTST_OFFSET			0x0214
-#define OMAP4430_RM_DUCATI_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0214)
-#define OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET		0x0224
-#define OMAP4430_RM_DUCATI_DUCATI_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0224)
-#define OMAP4_RM_SDMA_SDMA_CONTEXT_OFFSET		0x0324
-#define OMAP4430_RM_SDMA_SDMA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0324)
-#define OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET		0x0424
-#define OMAP4430_RM_MEMIF_DMM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0424)
-#define OMAP4_RM_MEMIF_EMIF_FW_CONTEXT_OFFSET		0x042c
-#define OMAP4430_RM_MEMIF_EMIF_FW_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x042c)
-#define OMAP4_RM_MEMIF_EMIF_1_CONTEXT_OFFSET		0x0434
-#define OMAP4430_RM_MEMIF_EMIF_1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0434)
-#define OMAP4_RM_MEMIF_EMIF_2_CONTEXT_OFFSET		0x043c
-#define OMAP4430_RM_MEMIF_EMIF_2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x043c)
-#define OMAP4_RM_MEMIF_DLL_CONTEXT_OFFSET		0x0444
-#define OMAP4430_RM_MEMIF_DLL_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0444)
-#define OMAP4_RM_MEMIF_EMIF_H1_CONTEXT_OFFSET		0x0454
-#define OMAP4430_RM_MEMIF_EMIF_H1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0454)
-#define OMAP4_RM_MEMIF_EMIF_H2_CONTEXT_OFFSET		0x045c
-#define OMAP4430_RM_MEMIF_EMIF_H2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x045c)
-#define OMAP4_RM_MEMIF_DLL_H_CONTEXT_OFFSET		0x0464
-#define OMAP4430_RM_MEMIF_DLL_H_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0464)
-#define OMAP4_RM_D2D_SAD2D_CONTEXT_OFFSET		0x0524
-#define OMAP4430_RM_D2D_SAD2D_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0524)
-#define OMAP4_RM_D2D_MODEM_ICR_CONTEXT_OFFSET		0x052c
-#define OMAP4430_RM_D2D_MODEM_ICR_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x052c)
-#define OMAP4_RM_D2D_SAD2D_FW_CONTEXT_OFFSET		0x0534
-#define OMAP4430_RM_D2D_SAD2D_FW_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0534)
-#define OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET		0x0624
-#define OMAP4430_RM_L4CFG_L4_CFG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0624)
-#define OMAP4_RM_L4CFG_HW_SEM_CONTEXT_OFFSET		0x062c
-#define OMAP4430_RM_L4CFG_HW_SEM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x062c)
-#define OMAP4_RM_L4CFG_MAILBOX_CONTEXT_OFFSET		0x0634
-#define OMAP4430_RM_L4CFG_MAILBOX_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0634)
-#define OMAP4_RM_L4CFG_SAR_ROM_CONTEXT_OFFSET		0x063c
-#define OMAP4430_RM_L4CFG_SAR_ROM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x063c)
-#define OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET		0x0724
-#define OMAP4430_RM_L3INSTR_L3_3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0724)
-#define OMAP4_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET	0x072c
-#define OMAP4430_RM_L3INSTR_L3_INSTR_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x072c)
-#define OMAP4_RM_L3INSTR_OCP_WP1_CONTEXT_OFFSET		0x0744
-#define OMAP4430_RM_L3INSTR_OCP_WP1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0744)
-
-/* PRM.IVAHD_PRM register offsets */
-#define OMAP4_PM_IVAHD_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_IVAHD_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0000)
-#define OMAP4_PM_IVAHD_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_IVAHD_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0004)
-#define OMAP4_RM_IVAHD_RSTCTRL_OFFSET			0x0010
-#define OMAP4430_RM_IVAHD_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0010)
-#define OMAP4_RM_IVAHD_RSTST_OFFSET			0x0014
-#define OMAP4430_RM_IVAHD_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0014)
-#define OMAP4_RM_IVAHD_IVAHD_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_IVAHD_IVAHD_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0024)
-#define OMAP4_RM_IVAHD_SL2_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_IVAHD_SL2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x002c)
-
-/* PRM.CAM_PRM register offsets */
-#define OMAP4_PM_CAM_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_CAM_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_INST, 0x0000)
-#define OMAP4_PM_CAM_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_CAM_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_INST, 0x0004)
-#define OMAP4_RM_CAM_ISS_CONTEXT_OFFSET			0x0024
-#define OMAP4430_RM_CAM_ISS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_INST, 0x0024)
-#define OMAP4_RM_CAM_FDIF_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_CAM_FDIF_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_INST, 0x002c)
-
-/* PRM.DSS_PRM register offsets */
-#define OMAP4_PM_DSS_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_DSS_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x0000)
-#define OMAP4_PM_DSS_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_DSS_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x0004)
-#define OMAP4_PM_DSS_DSS_WKDEP_OFFSET			0x0020
-#define OMAP4430_PM_DSS_DSS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x0020)
-#define OMAP4_RM_DSS_DSS_CONTEXT_OFFSET			0x0024
-#define OMAP4430_RM_DSS_DSS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x0024)
-#define OMAP4_RM_DSS_DEISS_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_DSS_DEISS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x002c)
-
-/* PRM.GFX_PRM register offsets */
-#define OMAP4_PM_GFX_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_GFX_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_INST, 0x0000)
-#define OMAP4_PM_GFX_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_GFX_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_INST, 0x0004)
-#define OMAP4_RM_GFX_GFX_CONTEXT_OFFSET			0x0024
-#define OMAP4430_RM_GFX_GFX_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_INST, 0x0024)
-
-/* PRM.L3INIT_PRM register offsets */
-#define OMAP4_PM_L3INIT_PWRSTCTRL_OFFSET		0x0000
-#define OMAP4430_PM_L3INIT_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0000)
-#define OMAP4_PM_L3INIT_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_L3INIT_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0004)
-#define OMAP4_PM_L3INIT_MMC1_WKDEP_OFFSET		0x0028
-#define OMAP4430_PM_L3INIT_MMC1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0028)
-#define OMAP4_RM_L3INIT_MMC1_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_L3INIT_MMC1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x002c)
-#define OMAP4_PM_L3INIT_MMC2_WKDEP_OFFSET		0x0030
-#define OMAP4430_PM_L3INIT_MMC2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0030)
-#define OMAP4_RM_L3INIT_MMC2_CONTEXT_OFFSET		0x0034
-#define OMAP4430_RM_L3INIT_MMC2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0034)
-#define OMAP4_PM_L3INIT_HSI_WKDEP_OFFSET		0x0038
-#define OMAP4430_PM_L3INIT_HSI_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0038)
-#define OMAP4_RM_L3INIT_HSI_CONTEXT_OFFSET		0x003c
-#define OMAP4430_RM_L3INIT_HSI_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x003c)
-#define OMAP4_PM_L3INIT_UNIPRO1_WKDEP_OFFSET		0x0040
-#define OMAP4430_PM_L3INIT_UNIPRO1_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0040)
-#define OMAP4_RM_L3INIT_UNIPRO1_CONTEXT_OFFSET		0x0044
-#define OMAP4430_RM_L3INIT_UNIPRO1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0044)
-#define OMAP4_PM_L3INIT_USB_HOST_WKDEP_OFFSET		0x0058
-#define OMAP4430_PM_L3INIT_USB_HOST_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0058)
-#define OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET		0x005c
-#define OMAP4430_RM_L3INIT_USB_HOST_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x005c)
-#define OMAP4_PM_L3INIT_USB_OTG_WKDEP_OFFSET		0x0060
-#define OMAP4430_PM_L3INIT_USB_OTG_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0060)
-#define OMAP4_RM_L3INIT_USB_OTG_CONTEXT_OFFSET		0x0064
-#define OMAP4430_RM_L3INIT_USB_OTG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0064)
-#define OMAP4_PM_L3INIT_USB_TLL_WKDEP_OFFSET		0x0068
-#define OMAP4430_PM_L3INIT_USB_TLL_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0068)
-#define OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET		0x006c
-#define OMAP4430_RM_L3INIT_USB_TLL_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x006c)
-#define OMAP4_RM_L3INIT_P1500_CONTEXT_OFFSET		0x007c
-#define OMAP4430_RM_L3INIT_P1500_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x007c)
-#define OMAP4_RM_L3INIT_EMAC_CONTEXT_OFFSET		0x0084
-#define OMAP4430_RM_L3INIT_EMAC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0084)
-#define OMAP4_PM_L3INIT_SATA_WKDEP_OFFSET		0x0088
-#define OMAP4430_PM_L3INIT_SATA_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0088)
-#define OMAP4_RM_L3INIT_SATA_CONTEXT_OFFSET		0x008c
-#define OMAP4430_RM_L3INIT_SATA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x008c)
-#define OMAP4_RM_L3INIT_TPPSS_CONTEXT_OFFSET		0x0094
-#define OMAP4430_RM_L3INIT_TPPSS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0094)
-#define OMAP4_PM_L3INIT_PCIESS_WKDEP_OFFSET		0x0098
-#define OMAP4430_PM_L3INIT_PCIESS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0098)
-#define OMAP4_RM_L3INIT_PCIESS_CONTEXT_OFFSET		0x009c
-#define OMAP4430_RM_L3INIT_PCIESS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x009c)
-#define OMAP4_RM_L3INIT_CCPTX_CONTEXT_OFFSET		0x00ac
-#define OMAP4430_RM_L3INIT_CCPTX_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00ac)
-#define OMAP4_PM_L3INIT_XHPI_WKDEP_OFFSET		0x00c0
-#define OMAP4430_PM_L3INIT_XHPI_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00c0)
-#define OMAP4_RM_L3INIT_XHPI_CONTEXT_OFFSET		0x00c4
-#define OMAP4430_RM_L3INIT_XHPI_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00c4)
-#define OMAP4_PM_L3INIT_MMC6_WKDEP_OFFSET		0x00c8
-#define OMAP4430_PM_L3INIT_MMC6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00c8)
-#define OMAP4_RM_L3INIT_MMC6_CONTEXT_OFFSET		0x00cc
-#define OMAP4430_RM_L3INIT_MMC6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00cc)
-#define OMAP4_PM_L3INIT_USB_HOST_FS_WKDEP_OFFSET	0x00d0
-#define OMAP4430_PM_L3INIT_USB_HOST_FS_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00d0)
-#define OMAP4_RM_L3INIT_USB_HOST_FS_CONTEXT_OFFSET	0x00d4
-#define OMAP4430_RM_L3INIT_USB_HOST_FS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00d4)
-#define OMAP4_RM_L3INIT_USBPHYOCP2SCP_CONTEXT_OFFSET	0x00e4
-#define OMAP4430_RM_L3INIT_USBPHYOCP2SCP_CONTEXT	OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00e4)
-
-/* PRM.L4PER_PRM register offsets */
-#define OMAP4_PM_L4PER_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_L4PER_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0000)
-#define OMAP4_PM_L4PER_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_L4PER_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0004)
-#define OMAP4_RM_L4PER_ADC_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_L4PER_ADC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0024)
-#define OMAP4_PM_L4PER_DMTIMER10_WKDEP_OFFSET		0x0028
-#define OMAP4430_PM_L4PER_DMTIMER10_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0028)
-#define OMAP4_RM_L4PER_DMTIMER10_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_L4PER_DMTIMER10_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x002c)
-#define OMAP4_PM_L4PER_DMTIMER11_WKDEP_OFFSET		0x0030
-#define OMAP4430_PM_L4PER_DMTIMER11_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0030)
-#define OMAP4_RM_L4PER_DMTIMER11_CONTEXT_OFFSET		0x0034
-#define OMAP4430_RM_L4PER_DMTIMER11_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0034)
-#define OMAP4_PM_L4PER_DMTIMER2_WKDEP_OFFSET		0x0038
-#define OMAP4430_PM_L4PER_DMTIMER2_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0038)
-#define OMAP4_RM_L4PER_DMTIMER2_CONTEXT_OFFSET		0x003c
-#define OMAP4430_RM_L4PER_DMTIMER2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x003c)
-#define OMAP4_PM_L4PER_DMTIMER3_WKDEP_OFFSET		0x0040
-#define OMAP4430_PM_L4PER_DMTIMER3_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0040)
-#define OMAP4_RM_L4PER_DMTIMER3_CONTEXT_OFFSET		0x0044
-#define OMAP4430_RM_L4PER_DMTIMER3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0044)
-#define OMAP4_PM_L4PER_DMTIMER4_WKDEP_OFFSET		0x0048
-#define OMAP4430_PM_L4PER_DMTIMER4_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0048)
-#define OMAP4_RM_L4PER_DMTIMER4_CONTEXT_OFFSET		0x004c
-#define OMAP4430_RM_L4PER_DMTIMER4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x004c)
-#define OMAP4_PM_L4PER_DMTIMER9_WKDEP_OFFSET		0x0050
-#define OMAP4430_PM_L4PER_DMTIMER9_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0050)
-#define OMAP4_RM_L4PER_DMTIMER9_CONTEXT_OFFSET		0x0054
-#define OMAP4430_RM_L4PER_DMTIMER9_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0054)
-#define OMAP4_RM_L4PER_ELM_CONTEXT_OFFSET		0x005c
-#define OMAP4430_RM_L4PER_ELM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x005c)
-#define OMAP4_PM_L4PER_GPIO2_WKDEP_OFFSET		0x0060
-#define OMAP4430_PM_L4PER_GPIO2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0060)
-#define OMAP4_RM_L4PER_GPIO2_CONTEXT_OFFSET		0x0064
-#define OMAP4430_RM_L4PER_GPIO2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0064)
-#define OMAP4_PM_L4PER_GPIO3_WKDEP_OFFSET		0x0068
-#define OMAP4430_PM_L4PER_GPIO3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0068)
-#define OMAP4_RM_L4PER_GPIO3_CONTEXT_OFFSET		0x006c
-#define OMAP4430_RM_L4PER_GPIO3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x006c)
-#define OMAP4_PM_L4PER_GPIO4_WKDEP_OFFSET		0x0070
-#define OMAP4430_PM_L4PER_GPIO4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0070)
-#define OMAP4_RM_L4PER_GPIO4_CONTEXT_OFFSET		0x0074
-#define OMAP4430_RM_L4PER_GPIO4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0074)
-#define OMAP4_PM_L4PER_GPIO5_WKDEP_OFFSET		0x0078
-#define OMAP4430_PM_L4PER_GPIO5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0078)
-#define OMAP4_RM_L4PER_GPIO5_CONTEXT_OFFSET		0x007c
-#define OMAP4430_RM_L4PER_GPIO5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x007c)
-#define OMAP4_PM_L4PER_GPIO6_WKDEP_OFFSET		0x0080
-#define OMAP4430_PM_L4PER_GPIO6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0080)
-#define OMAP4_RM_L4PER_GPIO6_CONTEXT_OFFSET		0x0084
-#define OMAP4430_RM_L4PER_GPIO6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0084)
-#define OMAP4_RM_L4PER_HDQ1W_CONTEXT_OFFSET		0x008c
-#define OMAP4430_RM_L4PER_HDQ1W_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x008c)
-#define OMAP4_PM_L4PER_HECC1_WKDEP_OFFSET		0x0090
-#define OMAP4430_PM_L4PER_HECC1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0090)
-#define OMAP4_RM_L4PER_HECC1_CONTEXT_OFFSET		0x0094
-#define OMAP4430_RM_L4PER_HECC1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0094)
-#define OMAP4_PM_L4PER_HECC2_WKDEP_OFFSET		0x0098
-#define OMAP4430_PM_L4PER_HECC2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0098)
-#define OMAP4_RM_L4PER_HECC2_CONTEXT_OFFSET		0x009c
-#define OMAP4430_RM_L4PER_HECC2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x009c)
-#define OMAP4_PM_L4PER_I2C1_WKDEP_OFFSET		0x00a0
-#define OMAP4430_PM_L4PER_I2C1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00a0)
-#define OMAP4_RM_L4PER_I2C1_CONTEXT_OFFSET		0x00a4
-#define OMAP4430_RM_L4PER_I2C1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00a4)
-#define OMAP4_PM_L4PER_I2C2_WKDEP_OFFSET		0x00a8
-#define OMAP4430_PM_L4PER_I2C2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00a8)
-#define OMAP4_RM_L4PER_I2C2_CONTEXT_OFFSET		0x00ac
-#define OMAP4430_RM_L4PER_I2C2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00ac)
-#define OMAP4_PM_L4PER_I2C3_WKDEP_OFFSET		0x00b0
-#define OMAP4430_PM_L4PER_I2C3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00b0)
-#define OMAP4_RM_L4PER_I2C3_CONTEXT_OFFSET		0x00b4
-#define OMAP4430_RM_L4PER_I2C3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00b4)
-#define OMAP4_PM_L4PER_I2C4_WKDEP_OFFSET		0x00b8
-#define OMAP4430_PM_L4PER_I2C4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00b8)
-#define OMAP4_RM_L4PER_I2C4_CONTEXT_OFFSET		0x00bc
-#define OMAP4430_RM_L4PER_I2C4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00bc)
-#define OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET		0x00c0
-#define OMAP4430_RM_L4PER_L4_PER_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00c0)
-#define OMAP4_PM_L4PER_MCASP2_WKDEP_OFFSET		0x00d0
-#define OMAP4430_PM_L4PER_MCASP2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00d0)
-#define OMAP4_RM_L4PER_MCASP2_CONTEXT_OFFSET		0x00d4
-#define OMAP4430_RM_L4PER_MCASP2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00d4)
-#define OMAP4_PM_L4PER_MCASP3_WKDEP_OFFSET		0x00d8
-#define OMAP4430_PM_L4PER_MCASP3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00d8)
-#define OMAP4_RM_L4PER_MCASP3_CONTEXT_OFFSET		0x00dc
-#define OMAP4430_RM_L4PER_MCASP3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00dc)
-#define OMAP4_PM_L4PER_MCBSP4_WKDEP_OFFSET		0x00e0
-#define OMAP4430_PM_L4PER_MCBSP4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00e0)
-#define OMAP4_RM_L4PER_MCBSP4_CONTEXT_OFFSET		0x00e4
-#define OMAP4430_RM_L4PER_MCBSP4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00e4)
-#define OMAP4_RM_L4PER_MGATE_CONTEXT_OFFSET		0x00ec
-#define OMAP4430_RM_L4PER_MGATE_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00ec)
-#define OMAP4_PM_L4PER_MCSPI1_WKDEP_OFFSET		0x00f0
-#define OMAP4430_PM_L4PER_MCSPI1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00f0)
-#define OMAP4_RM_L4PER_MCSPI1_CONTEXT_OFFSET		0x00f4
-#define OMAP4430_RM_L4PER_MCSPI1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00f4)
-#define OMAP4_PM_L4PER_MCSPI2_WKDEP_OFFSET		0x00f8
-#define OMAP4430_PM_L4PER_MCSPI2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00f8)
-#define OMAP4_RM_L4PER_MCSPI2_CONTEXT_OFFSET		0x00fc
-#define OMAP4430_RM_L4PER_MCSPI2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00fc)
-#define OMAP4_PM_L4PER_MCSPI3_WKDEP_OFFSET		0x0100
-#define OMAP4430_PM_L4PER_MCSPI3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0100)
-#define OMAP4_RM_L4PER_MCSPI3_CONTEXT_OFFSET		0x0104
-#define OMAP4430_RM_L4PER_MCSPI3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0104)
-#define OMAP4_PM_L4PER_MCSPI4_WKDEP_OFFSET		0x0108
-#define OMAP4430_PM_L4PER_MCSPI4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0108)
-#define OMAP4_RM_L4PER_MCSPI4_CONTEXT_OFFSET		0x010c
-#define OMAP4430_RM_L4PER_MCSPI4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x010c)
-#define OMAP4_PM_L4PER_MMCSD3_WKDEP_OFFSET		0x0120
-#define OMAP4430_PM_L4PER_MMCSD3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0120)
-#define OMAP4_RM_L4PER_MMCSD3_CONTEXT_OFFSET		0x0124
-#define OMAP4430_RM_L4PER_MMCSD3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0124)
-#define OMAP4_PM_L4PER_MMCSD4_WKDEP_OFFSET		0x0128
-#define OMAP4430_PM_L4PER_MMCSD4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0128)
-#define OMAP4_RM_L4PER_MMCSD4_CONTEXT_OFFSET		0x012c
-#define OMAP4430_RM_L4PER_MMCSD4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x012c)
-#define OMAP4_RM_L4PER_MSPROHG_CONTEXT_OFFSET		0x0134
-#define OMAP4430_RM_L4PER_MSPROHG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0134)
-#define OMAP4_PM_L4PER_SLIMBUS2_WKDEP_OFFSET		0x0138
-#define OMAP4430_PM_L4PER_SLIMBUS2_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0138)
-#define OMAP4_RM_L4PER_SLIMBUS2_CONTEXT_OFFSET		0x013c
-#define OMAP4430_RM_L4PER_SLIMBUS2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x013c)
-#define OMAP4_PM_L4PER_UART1_WKDEP_OFFSET		0x0140
-#define OMAP4430_PM_L4PER_UART1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0140)
-#define OMAP4_RM_L4PER_UART1_CONTEXT_OFFSET		0x0144
-#define OMAP4430_RM_L4PER_UART1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0144)
-#define OMAP4_PM_L4PER_UART2_WKDEP_OFFSET		0x0148
-#define OMAP4430_PM_L4PER_UART2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0148)
-#define OMAP4_RM_L4PER_UART2_CONTEXT_OFFSET		0x014c
-#define OMAP4430_RM_L4PER_UART2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x014c)
-#define OMAP4_PM_L4PER_UART3_WKDEP_OFFSET		0x0150
-#define OMAP4430_PM_L4PER_UART3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0150)
-#define OMAP4_RM_L4PER_UART3_CONTEXT_OFFSET		0x0154
-#define OMAP4430_RM_L4PER_UART3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0154)
-#define OMAP4_PM_L4PER_UART4_WKDEP_OFFSET		0x0158
-#define OMAP4430_PM_L4PER_UART4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0158)
-#define OMAP4_RM_L4PER_UART4_CONTEXT_OFFSET		0x015c
-#define OMAP4430_RM_L4PER_UART4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x015c)
-#define OMAP4_PM_L4PER_MMCSD5_WKDEP_OFFSET		0x0160
-#define OMAP4430_PM_L4PER_MMCSD5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0160)
-#define OMAP4_RM_L4PER_MMCSD5_CONTEXT_OFFSET		0x0164
-#define OMAP4430_RM_L4PER_MMCSD5_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0164)
-#define OMAP4_PM_L4PER_I2C5_WKDEP_OFFSET		0x0168
-#define OMAP4430_PM_L4PER_I2C5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0168)
-#define OMAP4_RM_L4PER_I2C5_CONTEXT_OFFSET		0x016c
-#define OMAP4430_RM_L4PER_I2C5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x016c)
-#define OMAP4_RM_L4SEC_AES1_CONTEXT_OFFSET		0x01a4
-#define OMAP4430_RM_L4SEC_AES1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01a4)
-#define OMAP4_RM_L4SEC_AES2_CONTEXT_OFFSET		0x01ac
-#define OMAP4430_RM_L4SEC_AES2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01ac)
-#define OMAP4_RM_L4SEC_DES3DES_CONTEXT_OFFSET		0x01b4
-#define OMAP4430_RM_L4SEC_DES3DES_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01b4)
-#define OMAP4_RM_L4SEC_PKAEIP29_CONTEXT_OFFSET		0x01bc
-#define OMAP4430_RM_L4SEC_PKAEIP29_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01bc)
-#define OMAP4_RM_L4SEC_RNG_CONTEXT_OFFSET		0x01c4
-#define OMAP4430_RM_L4SEC_RNG_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01c4)
-#define OMAP4_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET		0x01cc
-#define OMAP4430_RM_L4SEC_SHA2MD51_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01cc)
-#define OMAP4_RM_L4SEC_CRYPTODMA_CONTEXT_OFFSET		0x01dc
-#define OMAP4430_RM_L4SEC_CRYPTODMA_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01dc)
-
-/* PRM.CEFUSE_PRM register offsets */
-#define OMAP4_PM_CEFUSE_PWRSTCTRL_OFFSET		0x0000
-#define OMAP4430_PM_CEFUSE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_INST, 0x0000)
-#define OMAP4_PM_CEFUSE_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_CEFUSE_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_INST, 0x0004)
-#define OMAP4_RM_CEFUSE_CEFUSE_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_CEFUSE_CEFUSE_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_INST, 0x0024)
-
-/* PRM.WKUP_PRM register offsets */
-#define OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_WKUP_L4WKUP_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0024)
-#define OMAP4_RM_WKUP_WDT1_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_WKUP_WDT1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x002c)
-#define OMAP4_PM_WKUP_WDT2_WKDEP_OFFSET			0x0030
-#define OMAP4430_PM_WKUP_WDT2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0030)
-#define OMAP4_RM_WKUP_WDT2_CONTEXT_OFFSET		0x0034
-#define OMAP4430_RM_WKUP_WDT2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0034)
-#define OMAP4_PM_WKUP_GPIO1_WKDEP_OFFSET		0x0038
-#define OMAP4430_PM_WKUP_GPIO1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0038)
-#define OMAP4_RM_WKUP_GPIO1_CONTEXT_OFFSET		0x003c
-#define OMAP4430_RM_WKUP_GPIO1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x003c)
-#define OMAP4_PM_WKUP_TIMER1_WKDEP_OFFSET		0x0040
-#define OMAP4430_PM_WKUP_TIMER1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0040)
-#define OMAP4_RM_WKUP_TIMER1_CONTEXT_OFFSET		0x0044
-#define OMAP4430_RM_WKUP_TIMER1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0044)
-#define OMAP4_PM_WKUP_TIMER12_WKDEP_OFFSET		0x0048
-#define OMAP4430_PM_WKUP_TIMER12_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0048)
-#define OMAP4_RM_WKUP_TIMER12_CONTEXT_OFFSET		0x004c
-#define OMAP4430_RM_WKUP_TIMER12_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x004c)
-#define OMAP4_RM_WKUP_SYNCTIMER_CONTEXT_OFFSET		0x0054
-#define OMAP4430_RM_WKUP_SYNCTIMER_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0054)
-#define OMAP4_PM_WKUP_USIM_WKDEP_OFFSET			0x0058
-#define OMAP4430_PM_WKUP_USIM_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0058)
-#define OMAP4_RM_WKUP_USIM_CONTEXT_OFFSET		0x005c
-#define OMAP4430_RM_WKUP_USIM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x005c)
-#define OMAP4_RM_WKUP_SARRAM_CONTEXT_OFFSET		0x0064
-#define OMAP4430_RM_WKUP_SARRAM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0064)
-#define OMAP4_PM_WKUP_KEYBOARD_WKDEP_OFFSET		0x0078
-#define OMAP4430_PM_WKUP_KEYBOARD_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0078)
-#define OMAP4_RM_WKUP_KEYBOARD_CONTEXT_OFFSET		0x007c
-#define OMAP4430_RM_WKUP_KEYBOARD_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x007c)
-#define OMAP4_PM_WKUP_RTC_WKDEP_OFFSET			0x0080
-#define OMAP4430_PM_WKUP_RTC_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0080)
-#define OMAP4_RM_WKUP_RTC_CONTEXT_OFFSET		0x0084
-#define OMAP4430_RM_WKUP_RTC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0084)
-
-/* PRM.WKUP_CM register offsets */
-#define OMAP4_CM_WKUP_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_WKUP_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0000)
-#define OMAP4_CM_WKUP_L4WKUP_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_WKUP_L4WKUP_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0020)
-#define OMAP4_CM_WKUP_WDT1_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_WKUP_WDT1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0028)
-#define OMAP4_CM_WKUP_WDT2_CLKCTRL_OFFSET		0x0030
-#define OMAP4430_CM_WKUP_WDT2_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0030)
-#define OMAP4_CM_WKUP_GPIO1_CLKCTRL_OFFSET		0x0038
-#define OMAP4430_CM_WKUP_GPIO1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0038)
-#define OMAP4_CM_WKUP_TIMER1_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_WKUP_TIMER1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0040)
-#define OMAP4_CM_WKUP_TIMER12_CLKCTRL_OFFSET		0x0048
-#define OMAP4430_CM_WKUP_TIMER12_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0048)
-#define OMAP4_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET		0x0050
-#define OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0050)
-#define OMAP4_CM_WKUP_USIM_CLKCTRL_OFFSET		0x0058
-#define OMAP4430_CM_WKUP_USIM_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0058)
-#define OMAP4_CM_WKUP_SARRAM_CLKCTRL_OFFSET		0x0060
-#define OMAP4430_CM_WKUP_SARRAM_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0060)
-#define OMAP4_CM_WKUP_KEYBOARD_CLKCTRL_OFFSET		0x0078
-#define OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0078)
-#define OMAP4_CM_WKUP_RTC_CLKCTRL_OFFSET		0x0080
-#define OMAP4430_CM_WKUP_RTC_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0080)
-#define OMAP4_CM_WKUP_BANDGAP_CLKCTRL_OFFSET		0x0088
-#define OMAP4430_CM_WKUP_BANDGAP_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0088)
-
-/* PRM.EMU_PRM register offsets */
-#define OMAP4_PM_EMU_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_EMU_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_INST, 0x0000)
-#define OMAP4_PM_EMU_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_EMU_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_INST, 0x0004)
-#define OMAP4_RM_EMU_DEBUGSS_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_EMU_DEBUGSS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_INST, 0x0024)
-
-/* PRM.EMU_CM register offsets */
-#define OMAP4_CM_EMU_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_EMU_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_INST, 0x0000)
-#define OMAP4_CM_EMU_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_EMU_DYNAMICDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_INST, 0x0008)
-#define OMAP4_CM_EMU_DEBUGSS_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_EMU_DEBUGSS_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_INST, 0x0020)
 
 /* PRM.DEVICE_PRM register offsets */
 #define OMAP4_PRM_RSTCTRL_OFFSET			0x0000
-#define OMAP4430_PRM_RSTCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0000)
-#define OMAP4_PRM_RSTST_OFFSET				0x0004
-#define OMAP4430_PRM_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0004)
-#define OMAP4_PRM_RSTTIME_OFFSET			0x0008
-#define OMAP4430_PRM_RSTTIME				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0008)
-#define OMAP4_PRM_CLKREQCTRL_OFFSET			0x000c
-#define OMAP4430_PRM_CLKREQCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x000c)
 #define OMAP4_PRM_VOLTCTRL_OFFSET			0x0010
-#define OMAP4430_PRM_VOLTCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0010)
-#define OMAP4_PRM_PWRREQCTRL_OFFSET			0x0014
-#define OMAP4430_PRM_PWRREQCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0014)
-#define OMAP4_PRM_PSCON_COUNT_OFFSET			0x0018
-#define OMAP4430_PRM_PSCON_COUNT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0018)
-#define OMAP4_PRM_IO_COUNT_OFFSET			0x001c
-#define OMAP4430_PRM_IO_COUNT				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x001c)
 #define OMAP4_PRM_IO_PMCTRL_OFFSET			0x0020
-#define OMAP4430_PRM_IO_PMCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0020)
-#define OMAP4_PRM_VOLTSETUP_WARMRESET_OFFSET		0x0024
-#define OMAP4430_PRM_VOLTSETUP_WARMRESET		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0024)
 #define OMAP4_PRM_VOLTSETUP_CORE_OFF_OFFSET		0x0028
-#define OMAP4430_PRM_VOLTSETUP_CORE_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0028)
 #define OMAP4_PRM_VOLTSETUP_MPU_OFF_OFFSET		0x002c
-#define OMAP4430_PRM_VOLTSETUP_MPU_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x002c)
 #define OMAP4_PRM_VOLTSETUP_IVA_OFF_OFFSET		0x0030
-#define OMAP4430_PRM_VOLTSETUP_IVA_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0030)
 #define OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET	0x0034
-#define OMAP4430_PRM_VOLTSETUP_CORE_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0034)
 #define OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET	0x0038
-#define OMAP4430_PRM_VOLTSETUP_MPU_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0038)
 #define OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET	0x003c
-#define OMAP4430_PRM_VOLTSETUP_IVA_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x003c)
 #define OMAP4_PRM_VP_CORE_CONFIG_OFFSET			0x0040
-#define OMAP4430_PRM_VP_CORE_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0040)
 #define OMAP4_PRM_VP_CORE_STATUS_OFFSET			0x0044
-#define OMAP4430_PRM_VP_CORE_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0044)
 #define OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET		0x0048
-#define OMAP4430_PRM_VP_CORE_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0048)
 #define OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET		0x004c
-#define OMAP4430_PRM_VP_CORE_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x004c)
 #define OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET		0x0050
-#define OMAP4430_PRM_VP_CORE_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0050)
 #define OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET		0x0054
-#define OMAP4430_PRM_VP_CORE_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0054)
 #define OMAP4_PRM_VP_MPU_CONFIG_OFFSET			0x0058
-#define OMAP4430_PRM_VP_MPU_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0058)
 #define OMAP4_PRM_VP_MPU_STATUS_OFFSET			0x005c
-#define OMAP4430_PRM_VP_MPU_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x005c)
 #define OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET		0x0060
-#define OMAP4430_PRM_VP_MPU_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0060)
 #define OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET			0x0064
-#define OMAP4430_PRM_VP_MPU_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0064)
 #define OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET		0x0068
-#define OMAP4430_PRM_VP_MPU_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0068)
 #define OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET		0x006c
-#define OMAP4430_PRM_VP_MPU_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x006c)
 #define OMAP4_PRM_VP_IVA_CONFIG_OFFSET			0x0070
-#define OMAP4430_PRM_VP_IVA_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0070)
 #define OMAP4_PRM_VP_IVA_STATUS_OFFSET			0x0074
-#define OMAP4430_PRM_VP_IVA_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0074)
 #define OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET		0x0078
-#define OMAP4430_PRM_VP_IVA_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0078)
 #define OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET			0x007c
-#define OMAP4430_PRM_VP_IVA_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x007c)
 #define OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET		0x0080
-#define OMAP4430_PRM_VP_IVA_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0080)
 #define OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET		0x0084
-#define OMAP4430_PRM_VP_IVA_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0084)
 #define OMAP4_PRM_VC_SMPS_SA_OFFSET			0x0088
-#define OMAP4430_PRM_VC_SMPS_SA				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0088)
 #define OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET		0x008c
-#define OMAP4430_PRM_VC_VAL_SMPS_RA_VOL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x008c)
 #define OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET		0x0090
-#define OMAP4430_PRM_VC_VAL_SMPS_RA_CMD			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0090)
 #define OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET		0x0094
-#define OMAP4430_PRM_VC_VAL_CMD_VDD_CORE_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0094)
 #define OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET		0x0098
-#define OMAP4430_PRM_VC_VAL_CMD_VDD_MPU_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0098)
 #define OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET		0x009c
-#define OMAP4430_PRM_VC_VAL_CMD_VDD_IVA_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x009c)
 #define OMAP4_PRM_VC_VAL_BYPASS_OFFSET			0x00a0
-#define OMAP4430_PRM_VC_VAL_BYPASS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00a0)
 #define OMAP4_PRM_VC_CFG_CHANNEL_OFFSET			0x00a4
-#define OMAP4430_PRM_VC_CFG_CHANNEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00a4)
 #define OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET		0x00a8
-#define OMAP4430_PRM_VC_CFG_I2C_MODE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00a8)
 #define OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET			0x00ac
-#define OMAP4430_PRM_VC_CFG_I2C_CLK			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00ac)
-#define OMAP4_PRM_SRAM_COUNT_OFFSET			0x00b0
-#define OMAP4430_PRM_SRAM_COUNT				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00b0)
-#define OMAP4_PRM_SRAM_WKUP_SETUP_OFFSET		0x00b4
-#define OMAP4430_PRM_SRAM_WKUP_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00b4)
-#define OMAP4_PRM_LDO_SRAM_CORE_SETUP_OFFSET		0x00b8
-#define OMAP4430_PRM_LDO_SRAM_CORE_SETUP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00b8)
-#define OMAP4_PRM_LDO_SRAM_CORE_CTRL_OFFSET		0x00bc
-#define OMAP4430_PRM_LDO_SRAM_CORE_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00bc)
-#define OMAP4_PRM_LDO_SRAM_MPU_SETUP_OFFSET		0x00c0
-#define OMAP4430_PRM_LDO_SRAM_MPU_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00c0)
-#define OMAP4_PRM_LDO_SRAM_MPU_CTRL_OFFSET		0x00c4
-#define OMAP4430_PRM_LDO_SRAM_MPU_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00c4)
-#define OMAP4_PRM_LDO_SRAM_IVA_SETUP_OFFSET		0x00c8
-#define OMAP4430_PRM_LDO_SRAM_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00c8)
-#define OMAP4_PRM_LDO_SRAM_IVA_CTRL_OFFSET		0x00cc
-#define OMAP4430_PRM_LDO_SRAM_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00cc)
-#define OMAP4_PRM_LDO_ABB_MPU_SETUP_OFFSET		0x00d0
-#define OMAP4430_PRM_LDO_ABB_MPU_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00d0)
-#define OMAP4_PRM_LDO_ABB_MPU_CTRL_OFFSET		0x00d4
-#define OMAP4430_PRM_LDO_ABB_MPU_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00d4)
-#define OMAP4_PRM_LDO_ABB_IVA_SETUP_OFFSET		0x00d8
-#define OMAP4430_PRM_LDO_ABB_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00d8)
-#define OMAP4_PRM_LDO_ABB_IVA_CTRL_OFFSET		0x00dc
-#define OMAP4430_PRM_LDO_ABB_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00dc)
-#define OMAP4_PRM_LDO_BANDGAP_SETUP_OFFSET		0x00e0
-#define OMAP4430_PRM_LDO_BANDGAP_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00e0)
-#define OMAP4_PRM_DEVICE_OFF_CTRL_OFFSET		0x00e4
-#define OMAP4430_PRM_DEVICE_OFF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00e4)
-#define OMAP4_PRM_PHASE1_CNDP_OFFSET			0x00e8
-#define OMAP4430_PRM_PHASE1_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00e8)
-#define OMAP4_PRM_PHASE2A_CNDP_OFFSET			0x00ec
-#define OMAP4430_PRM_PHASE2A_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00ec)
-#define OMAP4_PRM_PHASE2B_CNDP_OFFSET			0x00f0
-#define OMAP4430_PRM_PHASE2B_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f0)
-#define OMAP4_PRM_MODEM_IF_CTRL_OFFSET			0x00f4
-#define OMAP4430_PRM_MODEM_IF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f4)
-#define OMAP4_PRM_VC_ERRST_OFFSET			0x00f8
-#define OMAP4430_PRM_VC_ERRST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f8)
 
 #endif
diff --git a/arch/arm/mach-omap2/prm54xx.h b/arch/arm/mach-omap2/prm54xx.h
index 7329d6fcd78b..0b59eeda778d 100644
--- a/arch/arm/mach-omap2/prm54xx.h
+++ b/arch/arm/mach-omap2/prm54xx.h
@@ -46,372 +46,14 @@
 #define OMAP54XX_PRM_EMU_INST		0x1a00
 #define OMAP54XX_PRM_EMU_CM_INST	0x1b00
 #define OMAP54XX_PRM_DEVICE_INST	0x1c00
-#define OMAP54XX_PRM_INSTR_INST		0x1f00
 
 /* PRM clockdomain register offsets (from instance start) */
 #define OMAP54XX_PRM_WKUPAON_CM_WKUPAON_CDOFFS	0x0000
 #define OMAP54XX_PRM_EMU_CM_EMU_CDOFFS		0x0000
 
-/* PRM */
-
-/* PRM.OCP_SOCKET_PRM register offsets */
-#define OMAP54XX_REVISION_PRM_OFFSET				0x0000
-#define OMAP54XX_PRM_IRQSTATUS_MPU_OFFSET			0x0010
-#define OMAP54XX_PRM_IRQSTATUS_MPU_2_OFFSET			0x0014
-#define OMAP54XX_PRM_IRQENABLE_MPU_OFFSET			0x0018
-#define OMAP54XX_PRM_IRQENABLE_MPU_2_OFFSET			0x001c
-#define OMAP54XX_PRM_IRQSTATUS_IPU_OFFSET			0x0020
-#define OMAP54XX_PRM_IRQENABLE_IPU_OFFSET			0x0028
-#define OMAP54XX_PRM_IRQSTATUS_DSP_OFFSET			0x0030
-#define OMAP54XX_PRM_IRQENABLE_DSP_OFFSET			0x0038
-#define OMAP54XX_CM_PRM_PROFILING_CLKCTRL_OFFSET		0x0040
-#define OMAP54XX_CM_PRM_PROFILING_CLKCTRL			OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_OCP_SOCKET_INST, 0x0040)
-#define OMAP54XX_PRM_DEBUG_OUT_OFFSET				0x0084
-#define OMAP54XX_PRM_DEBUG_TRANS_CFG_OFFSET			0x0090
-#define OMAP54XX_PRM_DEBUG_OFF_TRANS_OFFSET			0x0094
-#define OMAP54XX_PRM_DEBUG_CORE_RET_TRANS_OFFSET		0x0098
-#define OMAP54XX_PRM_DEBUG_MPU_RET_TRANS_OFFSET			0x009c
-#define OMAP54XX_PRM_DEBUG_MM_RET_TRANS_OFFSET			0x00a0
-#define OMAP54XX_PRM_DEBUG_WKUPAON_FD_TRANS_OFFSET		0x00a4
-
-/* PRM.CKGEN_PRM register offsets */
-#define OMAP54XX_CM_CLKSEL_ABE_DSS_SYS_OFFSET			0x0000
-#define OMAP54XX_CM_CLKSEL_ABE_DSS_SYS				OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_CKGEN_INST, 0x0000)
-#define OMAP54XX_CM_CLKSEL_WKUPAON_OFFSET			0x0008
-#define OMAP54XX_CM_CLKSEL_WKUPAON				OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_CKGEN_INST, 0x0008)
-#define OMAP54XX_CM_CLKSEL_ABE_PLL_REF_OFFSET			0x000c
-#define OMAP54XX_CM_CLKSEL_ABE_PLL_REF				OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_CKGEN_INST, 0x000c)
-#define OMAP54XX_CM_CLKSEL_SYS_OFFSET				0x0010
-#define OMAP54XX_CM_CLKSEL_SYS					OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_CKGEN_INST, 0x0010)
-
-/* PRM.MPU_PRM register offsets */
-#define OMAP54XX_PM_MPU_PWRSTCTRL_OFFSET			0x0000
-#define OMAP54XX_PM_MPU_PWRSTST_OFFSET				0x0004
-#define OMAP54XX_RM_MPU_MPU_CONTEXT_OFFSET			0x0024
-
-/* PRM.DSP_PRM register offsets */
-#define OMAP54XX_PM_DSP_PWRSTCTRL_OFFSET			0x0000
-#define OMAP54XX_PM_DSP_PWRSTST_OFFSET				0x0004
-#define OMAP54XX_RM_DSP_RSTCTRL_OFFSET				0x0010
-#define OMAP54XX_RM_DSP_RSTST_OFFSET				0x0014
-#define OMAP54XX_RM_DSP_DSP_CONTEXT_OFFSET			0x0024
-
-/* PRM.ABE_PRM register offsets */
-#define OMAP54XX_PM_ABE_PWRSTCTRL_OFFSET			0x0000
-#define OMAP54XX_PM_ABE_PWRSTST_OFFSET				0x0004
-#define OMAP54XX_RM_ABE_AESS_CONTEXT_OFFSET			0x002c
-#define OMAP54XX_PM_ABE_MCPDM_WKDEP_OFFSET			0x0030
-#define OMAP54XX_RM_ABE_MCPDM_CONTEXT_OFFSET			0x0034
-#define OMAP54XX_PM_ABE_DMIC_WKDEP_OFFSET			0x0038
-#define OMAP54XX_RM_ABE_DMIC_CONTEXT_OFFSET			0x003c
-#define OMAP54XX_PM_ABE_MCASP_WKDEP_OFFSET			0x0040
-#define OMAP54XX_RM_ABE_MCASP_CONTEXT_OFFSET			0x0044
-#define OMAP54XX_PM_ABE_MCBSP1_WKDEP_OFFSET			0x0048
-#define OMAP54XX_RM_ABE_MCBSP1_CONTEXT_OFFSET			0x004c
-#define OMAP54XX_PM_ABE_MCBSP2_WKDEP_OFFSET			0x0050
-#define OMAP54XX_RM_ABE_MCBSP2_CONTEXT_OFFSET			0x0054
-#define OMAP54XX_PM_ABE_MCBSP3_WKDEP_OFFSET			0x0058
-#define OMAP54XX_RM_ABE_MCBSP3_CONTEXT_OFFSET			0x005c
-#define OMAP54XX_PM_ABE_SLIMBUS1_WKDEP_OFFSET			0x0060
-#define OMAP54XX_RM_ABE_SLIMBUS1_CONTEXT_OFFSET			0x0064
-#define OMAP54XX_PM_ABE_TIMER5_WKDEP_OFFSET			0x0068
-#define OMAP54XX_RM_ABE_TIMER5_CONTEXT_OFFSET			0x006c
-#define OMAP54XX_PM_ABE_TIMER6_WKDEP_OFFSET			0x0070
-#define OMAP54XX_RM_ABE_TIMER6_CONTEXT_OFFSET			0x0074
-#define OMAP54XX_PM_ABE_TIMER7_WKDEP_OFFSET			0x0078
-#define OMAP54XX_RM_ABE_TIMER7_CONTEXT_OFFSET			0x007c
-#define OMAP54XX_PM_ABE_TIMER8_WKDEP_OFFSET			0x0080
-#define OMAP54XX_RM_ABE_TIMER8_CONTEXT_OFFSET			0x0084
-#define OMAP54XX_PM_ABE_WD_TIMER3_WKDEP_OFFSET			0x0088
-#define OMAP54XX_RM_ABE_WD_TIMER3_CONTEXT_OFFSET		0x008c
-
-/* PRM.COREAON_PRM register offsets */
-#define OMAP54XX_PM_COREAON_SMARTREFLEX_MPU_WKDEP_OFFSET	0x0028
-#define OMAP54XX_RM_COREAON_SMARTREFLEX_MPU_CONTEXT_OFFSET	0x002c
-#define OMAP54XX_PM_COREAON_SMARTREFLEX_MM_WKDEP_OFFSET		0x0030
-#define OMAP54XX_RM_COREAON_SMARTREFLEX_MM_CONTEXT_OFFSET	0x0034
-#define OMAP54XX_PM_COREAON_SMARTREFLEX_CORE_WKDEP_OFFSET	0x0038
-#define OMAP54XX_RM_COREAON_SMARTREFLEX_CORE_CONTEXT_OFFSET	0x003c
-
-/* PRM.CORE_PRM register offsets */
-#define OMAP54XX_PM_CORE_PWRSTCTRL_OFFSET			0x0000
-#define OMAP54XX_PM_CORE_PWRSTST_OFFSET				0x0004
-#define OMAP54XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET		0x0024
-#define OMAP54XX_RM_L3MAIN2_L3_MAIN_2_CONTEXT_OFFSET		0x0124
-#define OMAP54XX_RM_L3MAIN2_GPMC_CONTEXT_OFFSET			0x012c
-#define OMAP54XX_RM_L3MAIN2_OCMC_RAM_CONTEXT_OFFSET		0x0134
-#define OMAP54XX_RM_IPU_RSTCTRL_OFFSET				0x0210
-#define OMAP54XX_RM_IPU_RSTST_OFFSET				0x0214
-#define OMAP54XX_RM_IPU_IPU_CONTEXT_OFFSET			0x0224
-#define OMAP54XX_RM_DMA_DMA_SYSTEM_CONTEXT_OFFSET		0x0324
-#define OMAP54XX_RM_EMIF_DMM_CONTEXT_OFFSET			0x0424
-#define OMAP54XX_RM_EMIF_EMIF_OCP_FW_CONTEXT_OFFSET		0x042c
-#define OMAP54XX_RM_EMIF_EMIF1_CONTEXT_OFFSET			0x0434
-#define OMAP54XX_RM_EMIF_EMIF2_CONTEXT_OFFSET			0x043c
-#define OMAP54XX_RM_EMIF_EMIF_DLL_CONTEXT_OFFSET		0x0444
-#define OMAP54XX_RM_C2C_C2C_CONTEXT_OFFSET			0x0524
-#define OMAP54XX_RM_C2C_MODEM_ICR_CONTEXT_OFFSET		0x052c
-#define OMAP54XX_RM_C2C_C2C_OCP_FW_CONTEXT_OFFSET		0x0534
-#define OMAP54XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET			0x0624
-#define OMAP54XX_RM_L4CFG_SPINLOCK_CONTEXT_OFFSET		0x062c
-#define OMAP54XX_RM_L4CFG_MAILBOX_CONTEXT_OFFSET		0x0634
-#define OMAP54XX_RM_L4CFG_SAR_ROM_CONTEXT_OFFSET		0x063c
-#define OMAP54XX_RM_L4CFG_OCP2SCP2_CONTEXT_OFFSET		0x0644
-#define OMAP54XX_RM_L3INSTR_L3_MAIN_3_CONTEXT_OFFSET		0x0724
-#define OMAP54XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET		0x072c
-#define OMAP54XX_RM_L3INSTR_OCP_WP_NOC_CONTEXT_OFFSET		0x0744
-#define OMAP54XX_RM_MIPIEXT_LLI_CONTEXT_OFFSET			0x0824
-#define OMAP54XX_RM_MIPIEXT_LLI_OCP_FW_CONTEXT_OFFSET		0x082c
-#define OMAP54XX_RM_MIPIEXT_MPHY_CONTEXT_OFFSET			0x0834
-#define OMAP54XX_PM_L4PER_TIMER10_WKDEP_OFFSET			0x0928
-#define OMAP54XX_RM_L4PER_TIMER10_CONTEXT_OFFSET		0x092c
-#define OMAP54XX_PM_L4PER_TIMER11_WKDEP_OFFSET			0x0930
-#define OMAP54XX_RM_L4PER_TIMER11_CONTEXT_OFFSET		0x0934
-#define OMAP54XX_PM_L4PER_TIMER2_WKDEP_OFFSET			0x0938
-#define OMAP54XX_RM_L4PER_TIMER2_CONTEXT_OFFSET			0x093c
-#define OMAP54XX_PM_L4PER_TIMER3_WKDEP_OFFSET			0x0940
-#define OMAP54XX_RM_L4PER_TIMER3_CONTEXT_OFFSET			0x0944
-#define OMAP54XX_PM_L4PER_TIMER4_WKDEP_OFFSET			0x0948
-#define OMAP54XX_RM_L4PER_TIMER4_CONTEXT_OFFSET			0x094c
-#define OMAP54XX_PM_L4PER_TIMER9_WKDEP_OFFSET			0x0950
-#define OMAP54XX_RM_L4PER_TIMER9_CONTEXT_OFFSET			0x0954
-#define OMAP54XX_RM_L4PER_ELM_CONTEXT_OFFSET			0x095c
-#define OMAP54XX_PM_L4PER_GPIO2_WKDEP_OFFSET			0x0960
-#define OMAP54XX_RM_L4PER_GPIO2_CONTEXT_OFFSET			0x0964
-#define OMAP54XX_PM_L4PER_GPIO3_WKDEP_OFFSET			0x0968
-#define OMAP54XX_RM_L4PER_GPIO3_CONTEXT_OFFSET			0x096c
-#define OMAP54XX_PM_L4PER_GPIO4_WKDEP_OFFSET			0x0970
-#define OMAP54XX_RM_L4PER_GPIO4_CONTEXT_OFFSET			0x0974
-#define OMAP54XX_PM_L4PER_GPIO5_WKDEP_OFFSET			0x0978
-#define OMAP54XX_RM_L4PER_GPIO5_CONTEXT_OFFSET			0x097c
-#define OMAP54XX_PM_L4PER_GPIO6_WKDEP_OFFSET			0x0980
-#define OMAP54XX_RM_L4PER_GPIO6_CONTEXT_OFFSET			0x0984
-#define OMAP54XX_RM_L4PER_HDQ1W_CONTEXT_OFFSET			0x098c
-#define OMAP54XX_PM_L4PER_I2C1_WKDEP_OFFSET			0x09a0
-#define OMAP54XX_RM_L4PER_I2C1_CONTEXT_OFFSET			0x09a4
-#define OMAP54XX_PM_L4PER_I2C2_WKDEP_OFFSET			0x09a8
-#define OMAP54XX_RM_L4PER_I2C2_CONTEXT_OFFSET			0x09ac
-#define OMAP54XX_PM_L4PER_I2C3_WKDEP_OFFSET			0x09b0
-#define OMAP54XX_RM_L4PER_I2C3_CONTEXT_OFFSET			0x09b4
-#define OMAP54XX_PM_L4PER_I2C4_WKDEP_OFFSET			0x09b8
-#define OMAP54XX_RM_L4PER_I2C4_CONTEXT_OFFSET			0x09bc
-#define OMAP54XX_RM_L4PER_L4_PER_CONTEXT_OFFSET			0x09c0
-#define OMAP54XX_PM_L4PER_MCSPI1_WKDEP_OFFSET			0x09f0
-#define OMAP54XX_RM_L4PER_MCSPI1_CONTEXT_OFFSET			0x09f4
-#define OMAP54XX_PM_L4PER_MCSPI2_WKDEP_OFFSET			0x09f8
-#define OMAP54XX_RM_L4PER_MCSPI2_CONTEXT_OFFSET			0x09fc
-#define OMAP54XX_PM_L4PER_MCSPI3_WKDEP_OFFSET			0x0a00
-#define OMAP54XX_RM_L4PER_MCSPI3_CONTEXT_OFFSET			0x0a04
-#define OMAP54XX_PM_L4PER_MCSPI4_WKDEP_OFFSET			0x0a08
-#define OMAP54XX_RM_L4PER_MCSPI4_CONTEXT_OFFSET			0x0a0c
-#define OMAP54XX_PM_L4PER_GPIO7_WKDEP_OFFSET			0x0a10
-#define OMAP54XX_RM_L4PER_GPIO7_CONTEXT_OFFSET			0x0a14
-#define OMAP54XX_PM_L4PER_GPIO8_WKDEP_OFFSET			0x0a18
-#define OMAP54XX_RM_L4PER_GPIO8_CONTEXT_OFFSET			0x0a1c
-#define OMAP54XX_PM_L4PER_MMC3_WKDEP_OFFSET			0x0a20
-#define OMAP54XX_RM_L4PER_MMC3_CONTEXT_OFFSET			0x0a24
-#define OMAP54XX_PM_L4PER_MMC4_WKDEP_OFFSET			0x0a28
-#define OMAP54XX_RM_L4PER_MMC4_CONTEXT_OFFSET			0x0a2c
-#define OMAP54XX_PM_L4PER_UART1_WKDEP_OFFSET			0x0a40
-#define OMAP54XX_RM_L4PER_UART1_CONTEXT_OFFSET			0x0a44
-#define OMAP54XX_PM_L4PER_UART2_WKDEP_OFFSET			0x0a48
-#define OMAP54XX_RM_L4PER_UART2_CONTEXT_OFFSET			0x0a4c
-#define OMAP54XX_PM_L4PER_UART3_WKDEP_OFFSET			0x0a50
-#define OMAP54XX_RM_L4PER_UART3_CONTEXT_OFFSET			0x0a54
-#define OMAP54XX_RM_L4PER_UART4_CONTEXT_OFFSET			0x0a58
-#define OMAP54XX_PM_L4PER_UART4_WKDEP_OFFSET			0x0a5c
-#define OMAP54XX_PM_L4PER_MMC5_WKDEP_OFFSET			0x0a60
-#define OMAP54XX_RM_L4PER_MMC5_CONTEXT_OFFSET			0x0a64
-#define OMAP54XX_PM_L4PER_I2C5_WKDEP_OFFSET			0x0a68
-#define OMAP54XX_RM_L4PER_I2C5_CONTEXT_OFFSET			0x0a6c
-#define OMAP54XX_PM_L4PER_UART5_WKDEP_OFFSET			0x0a70
-#define OMAP54XX_RM_L4PER_UART5_CONTEXT_OFFSET			0x0a74
-#define OMAP54XX_PM_L4PER_UART6_WKDEP_OFFSET			0x0a78
-#define OMAP54XX_RM_L4PER_UART6_CONTEXT_OFFSET			0x0a7c
-#define OMAP54XX_RM_L4SEC_AES1_CONTEXT_OFFSET			0x0aa4
-#define OMAP54XX_RM_L4SEC_AES2_CONTEXT_OFFSET			0x0aac
-#define OMAP54XX_RM_L4SEC_DES3DES_CONTEXT_OFFSET		0x0ab4
-#define OMAP54XX_RM_L4SEC_FPKA_CONTEXT_OFFSET			0x0abc
-#define OMAP54XX_RM_L4SEC_RNG_CONTEXT_OFFSET			0x0ac4
-#define OMAP54XX_RM_L4SEC_SHA2MD5_CONTEXT_OFFSET		0x0acc
-#define OMAP54XX_RM_L4SEC_DMA_CRYPTO_CONTEXT_OFFSET		0x0adc
-
-/* PRM.IVA_PRM register offsets */
-#define OMAP54XX_PM_IVA_PWRSTCTRL_OFFSET			0x0000
-#define OMAP54XX_PM_IVA_PWRSTST_OFFSET				0x0004
-#define OMAP54XX_RM_IVA_RSTCTRL_OFFSET				0x0010
-#define OMAP54XX_RM_IVA_RSTST_OFFSET				0x0014
-#define OMAP54XX_RM_IVA_IVA_CONTEXT_OFFSET			0x0024
-#define OMAP54XX_RM_IVA_SL2_CONTEXT_OFFSET			0x002c
-
-/* PRM.CAM_PRM register offsets */
-#define OMAP54XX_PM_CAM_PWRSTCTRL_OFFSET			0x0000
-#define OMAP54XX_PM_CAM_PWRSTST_OFFSET				0x0004
-#define OMAP54XX_RM_CAM_ISS_CONTEXT_OFFSET			0x0024
-#define OMAP54XX_RM_CAM_FDIF_CONTEXT_OFFSET			0x002c
-#define OMAP54XX_RM_CAM_CAL_CONTEXT_OFFSET			0x0034
-
-/* PRM.DSS_PRM register offsets */
-#define OMAP54XX_PM_DSS_PWRSTCTRL_OFFSET			0x0000
-#define OMAP54XX_PM_DSS_PWRSTST_OFFSET				0x0004
-#define OMAP54XX_PM_DSS_DSS_WKDEP_OFFSET			0x0020
-#define OMAP54XX_RM_DSS_DSS_CONTEXT_OFFSET			0x0024
-#define OMAP54XX_RM_DSS_BB2D_CONTEXT_OFFSET			0x0034
-
-/* PRM.GPU_PRM register offsets */
-#define OMAP54XX_PM_GPU_PWRSTCTRL_OFFSET			0x0000
-#define OMAP54XX_PM_GPU_PWRSTST_OFFSET				0x0004
-#define OMAP54XX_RM_GPU_GPU_CONTEXT_OFFSET			0x0024
-
-/* PRM.L3INIT_PRM register offsets */
-#define OMAP54XX_PM_L3INIT_PWRSTCTRL_OFFSET			0x0000
-#define OMAP54XX_PM_L3INIT_PWRSTST_OFFSET			0x0004
-#define OMAP54XX_PM_L3INIT_MMC1_WKDEP_OFFSET			0x0028
-#define OMAP54XX_RM_L3INIT_MMC1_CONTEXT_OFFSET			0x002c
-#define OMAP54XX_PM_L3INIT_MMC2_WKDEP_OFFSET			0x0030
-#define OMAP54XX_RM_L3INIT_MMC2_CONTEXT_OFFSET			0x0034
-#define OMAP54XX_PM_L3INIT_HSI_WKDEP_OFFSET			0x0038
-#define OMAP54XX_RM_L3INIT_HSI_CONTEXT_OFFSET			0x003c
-#define OMAP54XX_PM_L3INIT_UNIPRO2_WKDEP_OFFSET			0x0040
-#define OMAP54XX_RM_L3INIT_UNIPRO2_CONTEXT_OFFSET		0x0044
-#define OMAP54XX_PM_L3INIT_USB_HOST_HS_WKDEP_OFFSET		0x0058
-#define OMAP54XX_RM_L3INIT_USB_HOST_HS_CONTEXT_OFFSET		0x005c
-#define OMAP54XX_PM_L3INIT_USB_TLL_HS_WKDEP_OFFSET		0x0068
-#define OMAP54XX_RM_L3INIT_USB_TLL_HS_CONTEXT_OFFSET		0x006c
-#define OMAP54XX_RM_L3INIT_IEEE1500_2_OCP_CONTEXT_OFFSET	0x007c
-#define OMAP54XX_PM_L3INIT_SATA_WKDEP_OFFSET			0x0088
-#define OMAP54XX_RM_L3INIT_SATA_CONTEXT_OFFSET			0x008c
-#define OMAP54XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET		0x00e4
-#define OMAP54XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET		0x00ec
-#define OMAP54XX_PM_L3INIT_USB_OTG_SS_WKDEP_OFFSET		0x00f0
-#define OMAP54XX_RM_L3INIT_USB_OTG_SS_CONTEXT_OFFSET		0x00f4
-
-/* PRM.CUSTEFUSE_PRM register offsets */
-#define OMAP54XX_PM_CUSTEFUSE_PWRSTCTRL_OFFSET			0x0000
-#define OMAP54XX_PM_CUSTEFUSE_PWRSTST_OFFSET			0x0004
-#define OMAP54XX_RM_CUSTEFUSE_EFUSE_CTRL_CUST_CONTEXT_OFFSET	0x0024
-
-/* PRM.WKUPAON_PRM register offsets */
-#define OMAP54XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET		0x0024
-#define OMAP54XX_RM_WKUPAON_WD_TIMER1_CONTEXT_OFFSET		0x002c
-#define OMAP54XX_PM_WKUPAON_WD_TIMER2_WKDEP_OFFSET		0x0030
-#define OMAP54XX_RM_WKUPAON_WD_TIMER2_CONTEXT_OFFSET		0x0034
-#define OMAP54XX_PM_WKUPAON_GPIO1_WKDEP_OFFSET			0x0038
-#define OMAP54XX_RM_WKUPAON_GPIO1_CONTEXT_OFFSET		0x003c
-#define OMAP54XX_PM_WKUPAON_TIMER1_WKDEP_OFFSET			0x0040
-#define OMAP54XX_RM_WKUPAON_TIMER1_CONTEXT_OFFSET		0x0044
-#define OMAP54XX_PM_WKUPAON_TIMER12_WKDEP_OFFSET		0x0048
-#define OMAP54XX_RM_WKUPAON_TIMER12_CONTEXT_OFFSET		0x004c
-#define OMAP54XX_RM_WKUPAON_COUNTER_32K_CONTEXT_OFFSET		0x0054
-#define OMAP54XX_RM_WKUPAON_SAR_RAM_CONTEXT_OFFSET		0x0064
-#define OMAP54XX_PM_WKUPAON_KBD_WKDEP_OFFSET			0x0078
-#define OMAP54XX_RM_WKUPAON_KBD_CONTEXT_OFFSET			0x007c
-
-/* PRM.WKUPAON_CM register offsets */
-#define OMAP54XX_CM_WKUPAON_CLKSTCTRL_OFFSET			0x0000
-#define OMAP54XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET		0x0020
-#define OMAP54XX_CM_WKUPAON_L4_WKUP_CLKCTRL			OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0020)
-#define OMAP54XX_CM_WKUPAON_WD_TIMER1_CLKCTRL_OFFSET		0x0028
-#define OMAP54XX_CM_WKUPAON_WD_TIMER1_CLKCTRL			OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0028)
-#define OMAP54XX_CM_WKUPAON_WD_TIMER2_CLKCTRL_OFFSET		0x0030
-#define OMAP54XX_CM_WKUPAON_WD_TIMER2_CLKCTRL			OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0030)
-#define OMAP54XX_CM_WKUPAON_GPIO1_CLKCTRL_OFFSET		0x0038
-#define OMAP54XX_CM_WKUPAON_GPIO1_CLKCTRL			OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0038)
-#define OMAP54XX_CM_WKUPAON_TIMER1_CLKCTRL_OFFSET		0x0040
-#define OMAP54XX_CM_WKUPAON_TIMER1_CLKCTRL			OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0040)
-#define OMAP54XX_CM_WKUPAON_TIMER12_CLKCTRL_OFFSET		0x0048
-#define OMAP54XX_CM_WKUPAON_TIMER12_CLKCTRL			OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0048)
-#define OMAP54XX_CM_WKUPAON_COUNTER_32K_CLKCTRL_OFFSET		0x0050
-#define OMAP54XX_CM_WKUPAON_COUNTER_32K_CLKCTRL			OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0050)
-#define OMAP54XX_CM_WKUPAON_SAR_RAM_CLKCTRL_OFFSET		0x0060
-#define OMAP54XX_CM_WKUPAON_SAR_RAM_CLKCTRL			OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0060)
-#define OMAP54XX_CM_WKUPAON_KBD_CLKCTRL_OFFSET			0x0078
-#define OMAP54XX_CM_WKUPAON_KBD_CLKCTRL				OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0078)
-#define OMAP54XX_CM_WKUPAON_SCRM_CLKCTRL_OFFSET			0x0090
-#define OMAP54XX_CM_WKUPAON_SCRM_CLKCTRL			OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0090)
-#define OMAP54XX_CM_WKUPAON_IO_SRCOMP_CLKCTRL_OFFSET		0x0098
-#define OMAP54XX_CM_WKUPAON_IO_SRCOMP_CLKCTRL			OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_WKUPAON_CM_INST, 0x0098)
-
-/* PRM.EMU_PRM register offsets */
-#define OMAP54XX_PM_EMU_PWRSTCTRL_OFFSET			0x0000
-#define OMAP54XX_PM_EMU_PWRSTST_OFFSET				0x0004
-#define OMAP54XX_RM_EMU_DEBUGSS_CONTEXT_OFFSET			0x0024
-
-/* PRM.EMU_CM register offsets */
-#define OMAP54XX_CM_EMU_CLKSTCTRL_OFFSET			0x0000
-#define OMAP54XX_CM_EMU_DYNAMICDEP_OFFSET			0x0008
-#define OMAP54XX_CM_EMU_DEBUGSS_CLKCTRL_OFFSET			0x0020
-#define OMAP54XX_CM_EMU_DEBUGSS_CLKCTRL				OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_EMU_CM_INST, 0x0020)
-#define OMAP54XX_CM_EMU_MPU_EMU_DBG_CLKCTRL_OFFSET		0x0028
-#define OMAP54XX_CM_EMU_MPU_EMU_DBG_CLKCTRL			OMAP54XX_PRM_REGADDR(OMAP54XX_PRM_EMU_CM_INST, 0x0028)
-
 /* PRM.DEVICE_PRM register offsets */
-#define OMAP54XX_PRM_RSTCTRL_OFFSET				0x0000
-#define OMAP54XX_PRM_RSTST_OFFSET				0x0004
-#define OMAP54XX_PRM_RSTTIME_OFFSET				0x0008
-#define OMAP54XX_PRM_CLKREQCTRL_OFFSET				0x000c
-#define OMAP54XX_PRM_VOLTCTRL_OFFSET				0x0010
-#define OMAP54XX_PRM_PWRREQCTRL_OFFSET				0x0014
-#define OMAP54XX_PRM_PSCON_COUNT_OFFSET				0x0018
-#define OMAP54XX_PRM_IO_COUNT_OFFSET				0x001c
-#define OMAP54XX_PRM_IO_PMCTRL_OFFSET				0x0020
-#define OMAP54XX_PRM_VOLTSETUP_WARMRESET_OFFSET			0x0024
-#define OMAP54XX_PRM_VOLTSETUP_CORE_OFF_OFFSET			0x0028
-#define OMAP54XX_PRM_VOLTSETUP_MPU_OFF_OFFSET			0x002c
-#define OMAP54XX_PRM_VOLTSETUP_MM_OFF_OFFSET			0x0030
 #define OMAP54XX_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET		0x0034
 #define OMAP54XX_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET		0x0038
 #define OMAP54XX_PRM_VOLTSETUP_MM_RET_SLEEP_OFFSET		0x003c
-#define OMAP54XX_PRM_VP_CORE_CONFIG_OFFSET			0x0040
-#define OMAP54XX_PRM_VP_CORE_STATUS_OFFSET			0x0044
-#define OMAP54XX_PRM_VP_CORE_VLIMITTO_OFFSET			0x0048
-#define OMAP54XX_PRM_VP_CORE_VOLTAGE_OFFSET			0x004c
-#define OMAP54XX_PRM_VP_CORE_VSTEPMAX_OFFSET			0x0050
-#define OMAP54XX_PRM_VP_CORE_VSTEPMIN_OFFSET			0x0054
-#define OMAP54XX_PRM_VP_MPU_CONFIG_OFFSET			0x0058
-#define OMAP54XX_PRM_VP_MPU_STATUS_OFFSET			0x005c
-#define OMAP54XX_PRM_VP_MPU_VLIMITTO_OFFSET			0x0060
-#define OMAP54XX_PRM_VP_MPU_VOLTAGE_OFFSET			0x0064
-#define OMAP54XX_PRM_VP_MPU_VSTEPMAX_OFFSET			0x0068
-#define OMAP54XX_PRM_VP_MPU_VSTEPMIN_OFFSET			0x006c
-#define OMAP54XX_PRM_VP_MM_CONFIG_OFFSET			0x0070
-#define OMAP54XX_PRM_VP_MM_STATUS_OFFSET			0x0074
-#define OMAP54XX_PRM_VP_MM_VLIMITTO_OFFSET			0x0078
-#define OMAP54XX_PRM_VP_MM_VOLTAGE_OFFSET			0x007c
-#define OMAP54XX_PRM_VP_MM_VSTEPMAX_OFFSET			0x0080
-#define OMAP54XX_PRM_VP_MM_VSTEPMIN_OFFSET			0x0084
-#define OMAP54XX_PRM_VC_SMPS_CORE_CONFIG_OFFSET			0x0088
-#define OMAP54XX_PRM_VC_SMPS_MM_CONFIG_OFFSET			0x008c
-#define OMAP54XX_PRM_VC_SMPS_MPU_CONFIG_OFFSET			0x0090
-#define OMAP54XX_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET		0x0094
-#define OMAP54XX_PRM_VC_VAL_CMD_VDD_MM_L_OFFSET			0x0098
-#define OMAP54XX_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET		0x009c
-#define OMAP54XX_PRM_VC_VAL_BYPASS_OFFSET			0x00a0
-#define OMAP54XX_PRM_VC_CORE_ERRST_OFFSET			0x00a4
-#define OMAP54XX_PRM_VC_MM_ERRST_OFFSET				0x00a8
-#define OMAP54XX_PRM_VC_MPU_ERRST_OFFSET			0x00ac
-#define OMAP54XX_PRM_VC_BYPASS_ERRST_OFFSET			0x00b0
-#define OMAP54XX_PRM_VC_CFG_I2C_MODE_OFFSET			0x00b4
-#define OMAP54XX_PRM_VC_CFG_I2C_CLK_OFFSET			0x00b8
-#define OMAP54XX_PRM_SRAM_COUNT_OFFSET				0x00bc
-#define OMAP54XX_PRM_SRAM_WKUP_SETUP_OFFSET			0x00c0
-#define OMAP54XX_PRM_SLDO_CORE_SETUP_OFFSET			0x00c4
-#define OMAP54XX_PRM_SLDO_CORE_CTRL_OFFSET			0x00c8
-#define OMAP54XX_PRM_SLDO_MPU_SETUP_OFFSET			0x00cc
-#define OMAP54XX_PRM_SLDO_MPU_CTRL_OFFSET			0x00d0
-#define OMAP54XX_PRM_SLDO_MM_SETUP_OFFSET			0x00d4
-#define OMAP54XX_PRM_SLDO_MM_CTRL_OFFSET			0x00d8
-#define OMAP54XX_PRM_ABBLDO_MPU_SETUP_OFFSET			0x00dc
-#define OMAP54XX_PRM_ABBLDO_MPU_CTRL_OFFSET			0x00e0
-#define OMAP54XX_PRM_ABBLDO_MM_SETUP_OFFSET			0x00e4
-#define OMAP54XX_PRM_ABBLDO_MM_CTRL_OFFSET			0x00e8
-#define OMAP54XX_PRM_BANDGAP_SETUP_OFFSET			0x00ec
-#define OMAP54XX_PRM_DEVICE_OFF_CTRL_OFFSET			0x00f0
-#define OMAP54XX_PRM_PHASE1_CNDP_OFFSET				0x00f4
-#define OMAP54XX_PRM_PHASE2A_CNDP_OFFSET			0x00f8
-#define OMAP54XX_PRM_PHASE2B_CNDP_OFFSET			0x00fc
-#define OMAP54XX_PRM_MODEM_IF_CTRL_OFFSET			0x0100
-#define OMAP54XX_PRM_VOLTST_MPU_OFFSET				0x0110
-#define OMAP54XX_PRM_VOLTST_MM_OFFSET				0x0114
 
 #endif
diff --git a/arch/arm/mach-omap2/prm7xx.h b/arch/arm/mach-omap2/prm7xx.h
index e5aee0409eae..0ad1deba319f 100644
--- a/arch/arm/mach-omap2/prm7xx.h
+++ b/arch/arm/mach-omap2/prm7xx.h
@@ -56,625 +56,12 @@
 #define DRA7XX_PRM_RTC_INST		0x1c60
 #define DRA7XX_PRM_VPE_INST		0x1c80
 #define DRA7XX_PRM_DEVICE_INST		0x1d00
-#define DRA7XX_PRM_INSTR_INST		0x1f00
 
 /* PRM clockdomain register offsets (from instance start) */
 #define DRA7XX_PRM_WKUPAON_CM_WKUPAON_CDOFFS	0x0000
 #define DRA7XX_PRM_EMU_CM_EMU_CDOFFS		0x0000
 
-/* PRM */
-
-/* PRM.OCP_SOCKET_PRM register offsets */
-#define DRA7XX_REVISION_PRM_OFFSET				0x0000
-#define DRA7XX_PRM_IRQSTATUS_MPU_OFFSET				0x0010
-#define DRA7XX_PRM_IRQSTATUS_MPU_2_OFFSET			0x0014
-#define DRA7XX_PRM_IRQENABLE_MPU_OFFSET				0x0018
-#define DRA7XX_PRM_IRQENABLE_MPU_2_OFFSET			0x001c
-#define DRA7XX_PRM_IRQSTATUS_IPU2_OFFSET			0x0020
-#define DRA7XX_PRM_IRQENABLE_IPU2_OFFSET			0x0028
-#define DRA7XX_PRM_IRQSTATUS_DSP1_OFFSET			0x0030
-#define DRA7XX_PRM_IRQENABLE_DSP1_OFFSET			0x0038
-#define DRA7XX_CM_PRM_PROFILING_CLKCTRL_OFFSET			0x0040
-#define DRA7XX_CM_PRM_PROFILING_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_OCP_SOCKET_INST, 0x0040)
-#define DRA7XX_PRM_IRQENABLE_DSP2_OFFSET			0x0044
-#define DRA7XX_PRM_IRQENABLE_EVE1_OFFSET			0x0048
-#define DRA7XX_PRM_IRQENABLE_EVE2_OFFSET			0x004c
-#define DRA7XX_PRM_IRQENABLE_EVE3_OFFSET			0x0050
-#define DRA7XX_PRM_IRQENABLE_EVE4_OFFSET			0x0054
-#define DRA7XX_PRM_IRQENABLE_IPU1_OFFSET			0x0058
-#define DRA7XX_PRM_IRQSTATUS_DSP2_OFFSET			0x005c
-#define DRA7XX_PRM_IRQSTATUS_EVE1_OFFSET			0x0060
-#define DRA7XX_PRM_IRQSTATUS_EVE2_OFFSET			0x0064
-#define DRA7XX_PRM_IRQSTATUS_EVE3_OFFSET			0x0068
-#define DRA7XX_PRM_IRQSTATUS_EVE4_OFFSET			0x006c
-#define DRA7XX_PRM_IRQSTATUS_IPU1_OFFSET			0x0070
-#define DRA7XX_PRM_DEBUG_CFG1_OFFSET				0x00e4
-#define DRA7XX_PRM_DEBUG_CFG2_OFFSET				0x00e8
-#define DRA7XX_PRM_DEBUG_CFG3_OFFSET				0x00ec
-#define DRA7XX_PRM_DEBUG_OUT_OFFSET				0x00f4
-
 /* PRM.CKGEN_PRM register offsets */
-#define DRA7XX_CM_CLKSEL_SYSCLK1_OFFSET				0x0000
-#define DRA7XX_CM_CLKSEL_SYSCLK1				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0000)
-#define DRA7XX_CM_CLKSEL_WKUPAON_OFFSET				0x0008
-#define DRA7XX_CM_CLKSEL_WKUPAON				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0008)
-#define DRA7XX_CM_CLKSEL_ABE_PLL_REF_OFFSET			0x000c
-#define DRA7XX_CM_CLKSEL_ABE_PLL_REF				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x000c)
-#define DRA7XX_CM_CLKSEL_SYS_OFFSET				0x0010
 #define DRA7XX_CM_CLKSEL_SYS					DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0010)
-#define DRA7XX_CM_CLKSEL_ABE_PLL_BYPAS_OFFSET			0x0014
-#define DRA7XX_CM_CLKSEL_ABE_PLL_BYPAS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0014)
-#define DRA7XX_CM_CLKSEL_ABE_PLL_SYS_OFFSET			0x0018
-#define DRA7XX_CM_CLKSEL_ABE_PLL_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0018)
-#define DRA7XX_CM_CLKSEL_ABE_24M_OFFSET				0x001c
-#define DRA7XX_CM_CLKSEL_ABE_24M				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x001c)
-#define DRA7XX_CM_CLKSEL_ABE_SYS_OFFSET				0x0020
-#define DRA7XX_CM_CLKSEL_ABE_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0020)
-#define DRA7XX_CM_CLKSEL_HDMI_MCASP_AUX_OFFSET			0x0024
-#define DRA7XX_CM_CLKSEL_HDMI_MCASP_AUX				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0024)
-#define DRA7XX_CM_CLKSEL_HDMI_TIMER_OFFSET			0x0028
-#define DRA7XX_CM_CLKSEL_HDMI_TIMER				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0028)
-#define DRA7XX_CM_CLKSEL_MCASP_SYS_OFFSET			0x002c
-#define DRA7XX_CM_CLKSEL_MCASP_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x002c)
-#define DRA7XX_CM_CLKSEL_MLBP_MCASP_OFFSET			0x0030
-#define DRA7XX_CM_CLKSEL_MLBP_MCASP				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0030)
-#define DRA7XX_CM_CLKSEL_MLB_MCASP_OFFSET			0x0034
-#define DRA7XX_CM_CLKSEL_MLB_MCASP				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0034)
-#define DRA7XX_CM_CLKSEL_PER_ABE_X1_GFCLK_MCASP_AUX_OFFSET	0x0038
-#define DRA7XX_CM_CLKSEL_PER_ABE_X1_GFCLK_MCASP_AUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0038)
-#define DRA7XX_CM_CLKSEL_SYS_CLK1_32K_OFFSET			0x0040
-#define DRA7XX_CM_CLKSEL_SYS_CLK1_32K				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0040)
-#define DRA7XX_CM_CLKSEL_TIMER_SYS_OFFSET			0x0044
-#define DRA7XX_CM_CLKSEL_TIMER_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0044)
-#define DRA7XX_CM_CLKSEL_VIDEO1_MCASP_AUX_OFFSET		0x0048
-#define DRA7XX_CM_CLKSEL_VIDEO1_MCASP_AUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0048)
-#define DRA7XX_CM_CLKSEL_VIDEO1_TIMER_OFFSET			0x004c
-#define DRA7XX_CM_CLKSEL_VIDEO1_TIMER				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x004c)
-#define DRA7XX_CM_CLKSEL_VIDEO2_MCASP_AUX_OFFSET		0x0050
-#define DRA7XX_CM_CLKSEL_VIDEO2_MCASP_AUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0050)
-#define DRA7XX_CM_CLKSEL_VIDEO2_TIMER_OFFSET			0x0054
-#define DRA7XX_CM_CLKSEL_VIDEO2_TIMER				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0054)
-#define DRA7XX_CM_CLKSEL_CLKOUTMUX0_OFFSET			0x0058
-#define DRA7XX_CM_CLKSEL_CLKOUTMUX0				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0058)
-#define DRA7XX_CM_CLKSEL_CLKOUTMUX1_OFFSET			0x005c
-#define DRA7XX_CM_CLKSEL_CLKOUTMUX1				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x005c)
-#define DRA7XX_CM_CLKSEL_CLKOUTMUX2_OFFSET			0x0060
-#define DRA7XX_CM_CLKSEL_CLKOUTMUX2				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0060)
-#define DRA7XX_CM_CLKSEL_HDMI_PLL_SYS_OFFSET			0x0064
-#define DRA7XX_CM_CLKSEL_HDMI_PLL_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0064)
-#define DRA7XX_CM_CLKSEL_VIDEO1_PLL_SYS_OFFSET			0x0068
-#define DRA7XX_CM_CLKSEL_VIDEO1_PLL_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0068)
-#define DRA7XX_CM_CLKSEL_VIDEO2_PLL_SYS_OFFSET			0x006c
-#define DRA7XX_CM_CLKSEL_VIDEO2_PLL_SYS				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x006c)
-#define DRA7XX_CM_CLKSEL_ABE_CLK_DIV_OFFSET			0x0070
-#define DRA7XX_CM_CLKSEL_ABE_CLK_DIV				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0070)
-#define DRA7XX_CM_CLKSEL_ABE_GICLK_DIV_OFFSET			0x0074
-#define DRA7XX_CM_CLKSEL_ABE_GICLK_DIV				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0074)
-#define DRA7XX_CM_CLKSEL_AESS_FCLK_DIV_OFFSET			0x0078
-#define DRA7XX_CM_CLKSEL_AESS_FCLK_DIV				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0078)
-#define DRA7XX_CM_CLKSEL_EVE_CLK_OFFSET				0x0080
-#define DRA7XX_CM_CLKSEL_EVE_CLK				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0080)
-#define DRA7XX_CM_CLKSEL_USB_OTG_CLK_CLKOUTMUX_OFFSET		0x0084
-#define DRA7XX_CM_CLKSEL_USB_OTG_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0084)
-#define DRA7XX_CM_CLKSEL_CORE_DPLL_OUT_CLK_CLKOUTMUX_OFFSET	0x0088
-#define DRA7XX_CM_CLKSEL_CORE_DPLL_OUT_CLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0088)
-#define DRA7XX_CM_CLKSEL_DSP_GFCLK_CLKOUTMUX_OFFSET		0x008c
-#define DRA7XX_CM_CLKSEL_DSP_GFCLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x008c)
-#define DRA7XX_CM_CLKSEL_EMIF_PHY_GCLK_CLKOUTMUX_OFFSET		0x0090
-#define DRA7XX_CM_CLKSEL_EMIF_PHY_GCLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0090)
-#define DRA7XX_CM_CLKSEL_EMU_CLK_CLKOUTMUX_OFFSET		0x0094
-#define DRA7XX_CM_CLKSEL_EMU_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0094)
-#define DRA7XX_CM_CLKSEL_FUNC_96M_AON_CLK_CLKOUTMUX_OFFSET	0x0098
-#define DRA7XX_CM_CLKSEL_FUNC_96M_AON_CLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x0098)
-#define DRA7XX_CM_CLKSEL_GMAC_250M_CLK_CLKOUTMUX_OFFSET		0x009c
-#define DRA7XX_CM_CLKSEL_GMAC_250M_CLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x009c)
-#define DRA7XX_CM_CLKSEL_GPU_GCLK_CLKOUTMUX_OFFSET		0x00a0
-#define DRA7XX_CM_CLKSEL_GPU_GCLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00a0)
-#define DRA7XX_CM_CLKSEL_HDMI_CLK_CLKOUTMUX_OFFSET		0x00a4
-#define DRA7XX_CM_CLKSEL_HDMI_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00a4)
-#define DRA7XX_CM_CLKSEL_IVA_GCLK_CLKOUTMUX_OFFSET		0x00a8
-#define DRA7XX_CM_CLKSEL_IVA_GCLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00a8)
-#define DRA7XX_CM_CLKSEL_L3INIT_480M_GFCLK_CLKOUTMUX_OFFSET	0x00ac
-#define DRA7XX_CM_CLKSEL_L3INIT_480M_GFCLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00ac)
-#define DRA7XX_CM_CLKSEL_MPU_GCLK_CLKOUTMUX_OFFSET		0x00b0
-#define DRA7XX_CM_CLKSEL_MPU_GCLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00b0)
-#define DRA7XX_CM_CLKSEL_PCIE1_CLK_CLKOUTMUX_OFFSET		0x00b4
-#define DRA7XX_CM_CLKSEL_PCIE1_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00b4)
-#define DRA7XX_CM_CLKSEL_PCIE2_CLK_CLKOUTMUX_OFFSET		0x00b8
-#define DRA7XX_CM_CLKSEL_PCIE2_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00b8)
-#define DRA7XX_CM_CLKSEL_PER_ABE_X1_CLK_CLKOUTMUX_OFFSET	0x00bc
-#define DRA7XX_CM_CLKSEL_PER_ABE_X1_CLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00bc)
-#define DRA7XX_CM_CLKSEL_SATA_CLK_CLKOUTMUX_OFFSET		0x00c0
-#define DRA7XX_CM_CLKSEL_SATA_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00c0)
-#define DRA7XX_CM_CLKSEL_SECURE_32K_CLK_CLKOUTMUX_OFFSET	0x00c4
-#define DRA7XX_CM_CLKSEL_SECURE_32K_CLK_CLKOUTMUX		DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00c4)
-#define DRA7XX_CM_CLKSEL_SYS_CLK1_CLKOUTMUX_OFFSET		0x00c8
-#define DRA7XX_CM_CLKSEL_SYS_CLK1_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00c8)
-#define DRA7XX_CM_CLKSEL_SYS_CLK2_CLKOUTMUX_OFFSET		0x00cc
-#define DRA7XX_CM_CLKSEL_SYS_CLK2_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00cc)
-#define DRA7XX_CM_CLKSEL_VIDEO1_CLK_CLKOUTMUX_OFFSET		0x00d0
-#define DRA7XX_CM_CLKSEL_VIDEO1_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00d0)
-#define DRA7XX_CM_CLKSEL_VIDEO2_CLK_CLKOUTMUX_OFFSET		0x00d4
-#define DRA7XX_CM_CLKSEL_VIDEO2_CLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00d4)
-#define DRA7XX_CM_CLKSEL_ABE_LP_CLK_OFFSET			0x00d8
-#define DRA7XX_CM_CLKSEL_ABE_LP_CLK				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00d8)
-#define DRA7XX_CM_CLKSEL_ADC_GFCLK_OFFSET			0x00dc
-#define DRA7XX_CM_CLKSEL_ADC_GFCLK				DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00dc)
-#define DRA7XX_CM_CLKSEL_EVE_GFCLK_CLKOUTMUX_OFFSET		0x00e0
-#define DRA7XX_CM_CLKSEL_EVE_GFCLK_CLKOUTMUX			DRA7XX_PRM_REGADDR(DRA7XX_PRM_CKGEN_INST, 0x00e0)
-
-/* PRM.MPU_PRM register offsets */
-#define DRA7XX_PM_MPU_PWRSTCTRL_OFFSET				0x0000
-#define DRA7XX_PM_MPU_PWRSTST_OFFSET				0x0004
-#define DRA7XX_RM_MPU_MPU_CONTEXT_OFFSET			0x0024
-
-/* PRM.DSP1_PRM register offsets */
-#define DRA7XX_PM_DSP1_PWRSTCTRL_OFFSET				0x0000
-#define DRA7XX_PM_DSP1_PWRSTST_OFFSET				0x0004
-#define DRA7XX_RM_DSP1_RSTCTRL_OFFSET				0x0010
-#define DRA7XX_RM_DSP1_RSTST_OFFSET				0x0014
-#define DRA7XX_RM_DSP1_DSP1_CONTEXT_OFFSET			0x0024
-
-/* PRM.IPU_PRM register offsets */
-#define DRA7XX_PM_IPU_PWRSTCTRL_OFFSET				0x0000
-#define DRA7XX_PM_IPU_PWRSTST_OFFSET				0x0004
-#define DRA7XX_RM_IPU1_RSTCTRL_OFFSET				0x0010
-#define DRA7XX_RM_IPU1_RSTST_OFFSET				0x0014
-#define DRA7XX_RM_IPU1_IPU1_CONTEXT_OFFSET			0x0024
-#define DRA7XX_PM_IPU_MCASP1_WKDEP_OFFSET			0x0050
-#define DRA7XX_RM_IPU_MCASP1_CONTEXT_OFFSET			0x0054
-#define DRA7XX_PM_IPU_TIMER5_WKDEP_OFFSET			0x0058
-#define DRA7XX_RM_IPU_TIMER5_CONTEXT_OFFSET			0x005c
-#define DRA7XX_PM_IPU_TIMER6_WKDEP_OFFSET			0x0060
-#define DRA7XX_RM_IPU_TIMER6_CONTEXT_OFFSET			0x0064
-#define DRA7XX_PM_IPU_TIMER7_WKDEP_OFFSET			0x0068
-#define DRA7XX_RM_IPU_TIMER7_CONTEXT_OFFSET			0x006c
-#define DRA7XX_PM_IPU_TIMER8_WKDEP_OFFSET			0x0070
-#define DRA7XX_RM_IPU_TIMER8_CONTEXT_OFFSET			0x0074
-#define DRA7XX_PM_IPU_I2C5_WKDEP_OFFSET				0x0078
-#define DRA7XX_RM_IPU_I2C5_CONTEXT_OFFSET			0x007c
-#define DRA7XX_PM_IPU_UART6_WKDEP_OFFSET			0x0080
-#define DRA7XX_RM_IPU_UART6_CONTEXT_OFFSET			0x0084
-
-/* PRM.COREAON_PRM register offsets */
-#define DRA7XX_PM_COREAON_SMARTREFLEX_MPU_WKDEP_OFFSET		0x0000
-#define DRA7XX_RM_COREAON_SMARTREFLEX_MPU_CONTEXT_OFFSET	0x0004
-#define DRA7XX_PM_COREAON_SMARTREFLEX_CORE_WKDEP_OFFSET		0x0010
-#define DRA7XX_RM_COREAON_SMARTREFLEX_CORE_CONTEXT_OFFSET	0x0014
-#define DRA7XX_PM_COREAON_SMARTREFLEX_GPU_WKDEP_OFFSET		0x0030
-#define DRA7XX_RM_COREAON_SMARTREFLEX_GPU_CONTEXT_OFFSET	0x0034
-#define DRA7XX_PM_COREAON_SMARTREFLEX_DSPEVE_WKDEP_OFFSET	0x0040
-#define DRA7XX_RM_COREAON_SMARTREFLEX_DSPEVE_CONTEXT_OFFSET	0x0044
-#define DRA7XX_PM_COREAON_SMARTREFLEX_IVAHD_WKDEP_OFFSET	0x0050
-#define DRA7XX_RM_COREAON_SMARTREFLEX_IVAHD_CONTEXT_OFFSET	0x0054
-#define DRA7XX_RM_COREAON_DUMMY_MODULE1_CONTEXT_OFFSET		0x0084
-#define DRA7XX_RM_COREAON_DUMMY_MODULE2_CONTEXT_OFFSET		0x0094
-#define DRA7XX_RM_COREAON_DUMMY_MODULE3_CONTEXT_OFFSET		0x00a4
-#define DRA7XX_RM_COREAON_DUMMY_MODULE4_CONTEXT_OFFSET		0x00b4
-
-/* PRM.CORE_PRM register offsets */
-#define DRA7XX_PM_CORE_PWRSTCTRL_OFFSET				0x0000
-#define DRA7XX_PM_CORE_PWRSTST_OFFSET				0x0004
-#define DRA7XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET		0x0024
-#define DRA7XX_RM_L3MAIN1_GPMC_CONTEXT_OFFSET			0x002c
-#define DRA7XX_RM_L3MAIN1_MMU_EDMA_CONTEXT_OFFSET		0x0034
-#define DRA7XX_PM_L3MAIN1_OCMC_RAM1_WKDEP_OFFSET		0x0050
-#define DRA7XX_RM_L3MAIN1_OCMC_RAM1_CONTEXT_OFFSET		0x0054
-#define DRA7XX_PM_L3MAIN1_OCMC_RAM2_WKDEP_OFFSET		0x0058
-#define DRA7XX_RM_L3MAIN1_OCMC_RAM2_CONTEXT_OFFSET		0x005c
-#define DRA7XX_PM_L3MAIN1_OCMC_RAM3_WKDEP_OFFSET		0x0060
-#define DRA7XX_RM_L3MAIN1_OCMC_RAM3_CONTEXT_OFFSET		0x0064
-#define DRA7XX_RM_L3MAIN1_OCMC_ROM_CONTEXT_OFFSET		0x006c
-#define DRA7XX_PM_L3MAIN1_TPCC_WKDEP_OFFSET			0x0070
-#define DRA7XX_RM_L3MAIN1_TPCC_CONTEXT_OFFSET			0x0074
-#define DRA7XX_PM_L3MAIN1_TPTC1_WKDEP_OFFSET			0x0078
-#define DRA7XX_RM_L3MAIN1_TPTC1_CONTEXT_OFFSET			0x007c
-#define DRA7XX_PM_L3MAIN1_TPTC2_WKDEP_OFFSET			0x0080
-#define DRA7XX_RM_L3MAIN1_TPTC2_CONTEXT_OFFSET			0x0084
-#define DRA7XX_RM_L3MAIN1_VCP1_CONTEXT_OFFSET			0x008c
-#define DRA7XX_RM_L3MAIN1_VCP2_CONTEXT_OFFSET			0x0094
-#define DRA7XX_RM_L3MAIN1_SPARE_CME_CONTEXT_OFFSET		0x009c
-#define DRA7XX_RM_L3MAIN1_SPARE_HDMI_CONTEXT_OFFSET		0x00a4
-#define DRA7XX_RM_L3MAIN1_SPARE_ICM_CONTEXT_OFFSET		0x00ac
-#define DRA7XX_RM_L3MAIN1_SPARE_IVA2_CONTEXT_OFFSET		0x00b4
-#define DRA7XX_RM_L3MAIN1_SPARE_SATA2_CONTEXT_OFFSET		0x00bc
-#define DRA7XX_RM_L3MAIN1_SPARE_UNKNOWN4_CONTEXT_OFFSET		0x00c4
-#define DRA7XX_RM_L3MAIN1_SPARE_UNKNOWN5_CONTEXT_OFFSET		0x00cc
-#define DRA7XX_RM_L3MAIN1_SPARE_UNKNOWN6_CONTEXT_OFFSET		0x00d4
-#define DRA7XX_RM_L3MAIN1_SPARE_VIDEOPLL1_CONTEXT_OFFSET	0x00dc
-#define DRA7XX_RM_L3MAIN1_SPARE_VIDEOPLL2_CONTEXT_OFFSET	0x00f4
-#define DRA7XX_RM_L3MAIN1_SPARE_VIDEOPLL3_CONTEXT_OFFSET	0x00fc
-#define DRA7XX_RM_IPU2_RSTCTRL_OFFSET				0x0210
-#define DRA7XX_RM_IPU2_RSTST_OFFSET				0x0214
-#define DRA7XX_RM_IPU2_IPU2_CONTEXT_OFFSET			0x0224
-#define DRA7XX_RM_DMA_DMA_SYSTEM_CONTEXT_OFFSET			0x0324
-#define DRA7XX_RM_EMIF_DMM_CONTEXT_OFFSET			0x0424
-#define DRA7XX_RM_EMIF_EMIF_OCP_FW_CONTEXT_OFFSET		0x042c
-#define DRA7XX_RM_EMIF_EMIF1_CONTEXT_OFFSET			0x0434
-#define DRA7XX_RM_EMIF_EMIF2_CONTEXT_OFFSET			0x043c
-#define DRA7XX_RM_EMIF_EMIF_DLL_CONTEXT_OFFSET			0x0444
-#define DRA7XX_RM_ATL_ATL_CONTEXT_OFFSET			0x0524
-#define DRA7XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET			0x0624
-#define DRA7XX_RM_L4CFG_SPINLOCK_CONTEXT_OFFSET			0x062c
-#define DRA7XX_RM_L4CFG_MAILBOX1_CONTEXT_OFFSET			0x0634
-#define DRA7XX_RM_L4CFG_SAR_ROM_CONTEXT_OFFSET			0x063c
-#define DRA7XX_RM_L4CFG_OCP2SCP2_CONTEXT_OFFSET			0x0644
-#define DRA7XX_RM_L4CFG_MAILBOX2_CONTEXT_OFFSET			0x064c
-#define DRA7XX_RM_L4CFG_MAILBOX3_CONTEXT_OFFSET			0x0654
-#define DRA7XX_RM_L4CFG_MAILBOX4_CONTEXT_OFFSET			0x065c
-#define DRA7XX_RM_L4CFG_MAILBOX5_CONTEXT_OFFSET			0x0664
-#define DRA7XX_RM_L4CFG_MAILBOX6_CONTEXT_OFFSET			0x066c
-#define DRA7XX_RM_L4CFG_MAILBOX7_CONTEXT_OFFSET			0x0674
-#define DRA7XX_RM_L4CFG_MAILBOX8_CONTEXT_OFFSET			0x067c
-#define DRA7XX_RM_L4CFG_MAILBOX9_CONTEXT_OFFSET			0x0684
-#define DRA7XX_RM_L4CFG_MAILBOX10_CONTEXT_OFFSET		0x068c
-#define DRA7XX_RM_L4CFG_MAILBOX11_CONTEXT_OFFSET		0x0694
-#define DRA7XX_RM_L4CFG_MAILBOX12_CONTEXT_OFFSET		0x069c
-#define DRA7XX_RM_L4CFG_MAILBOX13_CONTEXT_OFFSET		0x06a4
-#define DRA7XX_RM_L4CFG_SPARE_SMARTREFLEX_RTC_CONTEXT_OFFSET	0x06ac
-#define DRA7XX_RM_L4CFG_SPARE_SMARTREFLEX_SDRAM_CONTEXT_OFFSET	0x06b4
-#define DRA7XX_RM_L4CFG_SPARE_SMARTREFLEX_WKUP_CONTEXT_OFFSET	0x06bc
-#define DRA7XX_RM_L4CFG_IO_DELAY_BLOCK_CONTEXT_OFFSET		0x06c4
-#define DRA7XX_RM_L3INSTR_L3_MAIN_2_CONTEXT_OFFSET		0x0724
-#define DRA7XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET		0x072c
-#define DRA7XX_RM_L3INSTR_OCP_WP_NOC_CONTEXT_OFFSET		0x0744
-
-/* PRM.IVA_PRM register offsets */
-#define DRA7XX_PM_IVA_PWRSTCTRL_OFFSET				0x0000
-#define DRA7XX_PM_IVA_PWRSTST_OFFSET				0x0004
-#define DRA7XX_RM_IVA_RSTCTRL_OFFSET				0x0010
-#define DRA7XX_RM_IVA_RSTST_OFFSET				0x0014
-#define DRA7XX_RM_IVA_IVA_CONTEXT_OFFSET			0x0024
-#define DRA7XX_RM_IVA_SL2_CONTEXT_OFFSET			0x002c
-
-/* PRM.CAM_PRM register offsets */
-#define DRA7XX_PM_CAM_PWRSTCTRL_OFFSET				0x0000
-#define DRA7XX_PM_CAM_PWRSTST_OFFSET				0x0004
-#define DRA7XX_PM_CAM_VIP1_WKDEP_OFFSET				0x0020
-#define DRA7XX_RM_CAM_VIP1_CONTEXT_OFFSET			0x0024
-#define DRA7XX_PM_CAM_VIP2_WKDEP_OFFSET				0x0028
-#define DRA7XX_RM_CAM_VIP2_CONTEXT_OFFSET			0x002c
-#define DRA7XX_PM_CAM_VIP3_WKDEP_OFFSET				0x0030
-#define DRA7XX_RM_CAM_VIP3_CONTEXT_OFFSET			0x0034
-#define DRA7XX_RM_CAM_LVDSRX_CONTEXT_OFFSET			0x003c
-#define DRA7XX_RM_CAM_CSI1_CONTEXT_OFFSET			0x0044
-#define DRA7XX_RM_CAM_CSI2_CONTEXT_OFFSET			0x004c
-
-/* PRM.DSS_PRM register offsets */
-#define DRA7XX_PM_DSS_PWRSTCTRL_OFFSET				0x0000
-#define DRA7XX_PM_DSS_PWRSTST_OFFSET				0x0004
-#define DRA7XX_PM_DSS_DSS_WKDEP_OFFSET				0x0020
-#define DRA7XX_RM_DSS_DSS_CONTEXT_OFFSET			0x0024
-#define DRA7XX_PM_DSS_DSS2_WKDEP_OFFSET				0x0028
-#define DRA7XX_RM_DSS_BB2D_CONTEXT_OFFSET			0x0034
-#define DRA7XX_RM_DSS_SDVENC_CONTEXT_OFFSET			0x003c
-
-/* PRM.GPU_PRM register offsets */
-#define DRA7XX_PM_GPU_PWRSTCTRL_OFFSET				0x0000
-#define DRA7XX_PM_GPU_PWRSTST_OFFSET				0x0004
-#define DRA7XX_RM_GPU_GPU_CONTEXT_OFFSET			0x0024
-
-/* PRM.L3INIT_PRM register offsets */
-#define DRA7XX_PM_L3INIT_PWRSTCTRL_OFFSET			0x0000
-#define DRA7XX_PM_L3INIT_PWRSTST_OFFSET				0x0004
-#define DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET			0x0010
-#define DRA7XX_PM_L3INIT_MMC1_WKDEP_OFFSET			0x0028
-#define DRA7XX_RM_L3INIT_MMC1_CONTEXT_OFFSET			0x002c
-#define DRA7XX_PM_L3INIT_MMC2_WKDEP_OFFSET			0x0030
-#define DRA7XX_RM_L3INIT_MMC2_CONTEXT_OFFSET			0x0034
-#define DRA7XX_PM_L3INIT_USB_OTG_SS2_WKDEP_OFFSET		0x0040
-#define DRA7XX_RM_L3INIT_USB_OTG_SS2_CONTEXT_OFFSET		0x0044
-#define DRA7XX_PM_L3INIT_USB_OTG_SS3_WKDEP_OFFSET		0x0048
-#define DRA7XX_RM_L3INIT_USB_OTG_SS3_CONTEXT_OFFSET		0x004c
-#define DRA7XX_PM_L3INIT_USB_OTG_SS4_WKDEP_OFFSET		0x0050
-#define DRA7XX_RM_L3INIT_USB_OTG_SS4_CONTEXT_OFFSET		0x0054
-#define DRA7XX_RM_L3INIT_MLB_SS_CONTEXT_OFFSET			0x005c
-#define DRA7XX_RM_L3INIT_IEEE1500_2_OCP_CONTEXT_OFFSET		0x007c
-#define DRA7XX_PM_L3INIT_SATA_WKDEP_OFFSET			0x0088
-#define DRA7XX_RM_L3INIT_SATA_CONTEXT_OFFSET			0x008c
-#define DRA7XX_PM_L3INIT_PCIESS1_WKDEP_OFFSET			0x00b0
-#define DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET		0x00b4
-#define DRA7XX_PM_L3INIT_PCIESS2_WKDEP_OFFSET			0x00b8
-#define DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET		0x00bc
-#define DRA7XX_RM_GMAC_GMAC_CONTEXT_OFFSET			0x00d4
-#define DRA7XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET		0x00e4
-#define DRA7XX_RM_L3INIT_OCP2SCP3_CONTEXT_OFFSET		0x00ec
-#define DRA7XX_PM_L3INIT_USB_OTG_SS1_WKDEP_OFFSET		0x00f0
-#define DRA7XX_RM_L3INIT_USB_OTG_SS1_CONTEXT_OFFSET		0x00f4
-
-/* PRM.L4PER_PRM register offsets */
-#define DRA7XX_PM_L4PER_PWRSTCTRL_OFFSET			0x0000
-#define DRA7XX_PM_L4PER_PWRSTST_OFFSET				0x0004
-#define DRA7XX_RM_L4PER2_L4PER2_CONTEXT_OFFSET			0x000c
-#define DRA7XX_RM_L4PER3_L4PER3_CONTEXT_OFFSET			0x0014
-#define DRA7XX_RM_L4PER2_PRUSS1_CONTEXT_OFFSET			0x001c
-#define DRA7XX_RM_L4PER2_PRUSS2_CONTEXT_OFFSET			0x0024
-#define DRA7XX_PM_L4PER_TIMER10_WKDEP_OFFSET			0x0028
-#define DRA7XX_RM_L4PER_TIMER10_CONTEXT_OFFSET			0x002c
-#define DRA7XX_PM_L4PER_TIMER11_WKDEP_OFFSET			0x0030
-#define DRA7XX_RM_L4PER_TIMER11_CONTEXT_OFFSET			0x0034
-#define DRA7XX_PM_L4PER_TIMER2_WKDEP_OFFSET			0x0038
-#define DRA7XX_RM_L4PER_TIMER2_CONTEXT_OFFSET			0x003c
-#define DRA7XX_PM_L4PER_TIMER3_WKDEP_OFFSET			0x0040
-#define DRA7XX_RM_L4PER_TIMER3_CONTEXT_OFFSET			0x0044
-#define DRA7XX_PM_L4PER_TIMER4_WKDEP_OFFSET			0x0048
-#define DRA7XX_RM_L4PER_TIMER4_CONTEXT_OFFSET			0x004c
-#define DRA7XX_PM_L4PER_TIMER9_WKDEP_OFFSET			0x0050
-#define DRA7XX_RM_L4PER_TIMER9_CONTEXT_OFFSET			0x0054
-#define DRA7XX_RM_L4PER_ELM_CONTEXT_OFFSET			0x005c
-#define DRA7XX_PM_L4PER_GPIO2_WKDEP_OFFSET			0x0060
-#define DRA7XX_RM_L4PER_GPIO2_CONTEXT_OFFSET			0x0064
-#define DRA7XX_PM_L4PER_GPIO3_WKDEP_OFFSET			0x0068
-#define DRA7XX_RM_L4PER_GPIO3_CONTEXT_OFFSET			0x006c
-#define DRA7XX_PM_L4PER_GPIO4_WKDEP_OFFSET			0x0070
-#define DRA7XX_RM_L4PER_GPIO4_CONTEXT_OFFSET			0x0074
-#define DRA7XX_PM_L4PER_GPIO5_WKDEP_OFFSET			0x0078
-#define DRA7XX_RM_L4PER_GPIO5_CONTEXT_OFFSET			0x007c
-#define DRA7XX_PM_L4PER_GPIO6_WKDEP_OFFSET			0x0080
-#define DRA7XX_RM_L4PER_GPIO6_CONTEXT_OFFSET			0x0084
-#define DRA7XX_RM_L4PER_HDQ1W_CONTEXT_OFFSET			0x008c
-#define DRA7XX_RM_L4PER2_PWMSS2_CONTEXT_OFFSET			0x0094
-#define DRA7XX_RM_L4PER2_PWMSS3_CONTEXT_OFFSET			0x009c
-#define DRA7XX_PM_L4PER_I2C1_WKDEP_OFFSET			0x00a0
-#define DRA7XX_RM_L4PER_I2C1_CONTEXT_OFFSET			0x00a4
-#define DRA7XX_PM_L4PER_I2C2_WKDEP_OFFSET			0x00a8
-#define DRA7XX_RM_L4PER_I2C2_CONTEXT_OFFSET			0x00ac
-#define DRA7XX_PM_L4PER_I2C3_WKDEP_OFFSET			0x00b0
-#define DRA7XX_RM_L4PER_I2C3_CONTEXT_OFFSET			0x00b4
-#define DRA7XX_PM_L4PER_I2C4_WKDEP_OFFSET			0x00b8
-#define DRA7XX_RM_L4PER_I2C4_CONTEXT_OFFSET			0x00bc
-#define DRA7XX_RM_L4PER_L4PER1_CONTEXT_OFFSET			0x00c0
-#define DRA7XX_RM_L4PER2_PWMSS1_CONTEXT_OFFSET			0x00c4
-#define DRA7XX_PM_L4PER_TIMER13_WKDEP_OFFSET			0x00c8
-#define DRA7XX_RM_L4PER3_TIMER13_CONTEXT_OFFSET			0x00cc
-#define DRA7XX_PM_L4PER_TIMER14_WKDEP_OFFSET			0x00d0
-#define DRA7XX_RM_L4PER3_TIMER14_CONTEXT_OFFSET			0x00d4
-#define DRA7XX_PM_L4PER_TIMER15_WKDEP_OFFSET			0x00d8
-#define DRA7XX_RM_L4PER3_TIMER15_CONTEXT_OFFSET			0x00dc
-#define DRA7XX_PM_L4PER_MCSPI1_WKDEP_OFFSET			0x00f0
-#define DRA7XX_RM_L4PER_MCSPI1_CONTEXT_OFFSET			0x00f4
-#define DRA7XX_PM_L4PER_MCSPI2_WKDEP_OFFSET			0x00f8
-#define DRA7XX_RM_L4PER_MCSPI2_CONTEXT_OFFSET			0x00fc
-#define DRA7XX_PM_L4PER_MCSPI3_WKDEP_OFFSET			0x0100
-#define DRA7XX_RM_L4PER_MCSPI3_CONTEXT_OFFSET			0x0104
-#define DRA7XX_PM_L4PER_MCSPI4_WKDEP_OFFSET			0x0108
-#define DRA7XX_RM_L4PER_MCSPI4_CONTEXT_OFFSET			0x010c
-#define DRA7XX_PM_L4PER_GPIO7_WKDEP_OFFSET			0x0110
-#define DRA7XX_RM_L4PER_GPIO7_CONTEXT_OFFSET			0x0114
-#define DRA7XX_PM_L4PER_GPIO8_WKDEP_OFFSET			0x0118
-#define DRA7XX_RM_L4PER_GPIO8_CONTEXT_OFFSET			0x011c
-#define DRA7XX_PM_L4PER_MMC3_WKDEP_OFFSET			0x0120
-#define DRA7XX_RM_L4PER_MMC3_CONTEXT_OFFSET			0x0124
-#define DRA7XX_PM_L4PER_MMC4_WKDEP_OFFSET			0x0128
-#define DRA7XX_RM_L4PER_MMC4_CONTEXT_OFFSET			0x012c
-#define DRA7XX_PM_L4PER_TIMER16_WKDEP_OFFSET			0x0130
-#define DRA7XX_RM_L4PER3_TIMER16_CONTEXT_OFFSET			0x0134
-#define DRA7XX_PM_L4PER2_QSPI_WKDEP_OFFSET			0x0138
-#define DRA7XX_RM_L4PER2_QSPI_CONTEXT_OFFSET			0x013c
-#define DRA7XX_PM_L4PER_UART1_WKDEP_OFFSET			0x0140
-#define DRA7XX_RM_L4PER_UART1_CONTEXT_OFFSET			0x0144
-#define DRA7XX_PM_L4PER_UART2_WKDEP_OFFSET			0x0148
-#define DRA7XX_RM_L4PER_UART2_CONTEXT_OFFSET			0x014c
-#define DRA7XX_PM_L4PER_UART3_WKDEP_OFFSET			0x0150
-#define DRA7XX_RM_L4PER_UART3_CONTEXT_OFFSET			0x0154
-#define DRA7XX_PM_L4PER_UART4_WKDEP_OFFSET			0x0158
-#define DRA7XX_RM_L4PER_UART4_CONTEXT_OFFSET			0x015c
-#define DRA7XX_PM_L4PER2_MCASP2_WKDEP_OFFSET			0x0160
-#define DRA7XX_RM_L4PER2_MCASP2_CONTEXT_OFFSET			0x0164
-#define DRA7XX_PM_L4PER2_MCASP3_WKDEP_OFFSET			0x0168
-#define DRA7XX_RM_L4PER2_MCASP3_CONTEXT_OFFSET			0x016c
-#define DRA7XX_PM_L4PER_UART5_WKDEP_OFFSET			0x0170
-#define DRA7XX_RM_L4PER_UART5_CONTEXT_OFFSET			0x0174
-#define DRA7XX_PM_L4PER2_MCASP5_WKDEP_OFFSET			0x0178
-#define DRA7XX_RM_L4PER2_MCASP5_CONTEXT_OFFSET			0x017c
-#define DRA7XX_PM_L4PER2_MCASP6_WKDEP_OFFSET			0x0180
-#define DRA7XX_RM_L4PER2_MCASP6_CONTEXT_OFFSET			0x0184
-#define DRA7XX_PM_L4PER2_MCASP7_WKDEP_OFFSET			0x0188
-#define DRA7XX_RM_L4PER2_MCASP7_CONTEXT_OFFSET			0x018c
-#define DRA7XX_PM_L4PER2_MCASP8_WKDEP_OFFSET			0x0190
-#define DRA7XX_RM_L4PER2_MCASP8_CONTEXT_OFFSET			0x0194
-#define DRA7XX_PM_L4PER2_MCASP4_WKDEP_OFFSET			0x0198
-#define DRA7XX_RM_L4PER2_MCASP4_CONTEXT_OFFSET			0x019c
-#define DRA7XX_RM_L4SEC_AES1_CONTEXT_OFFSET			0x01a4
-#define DRA7XX_RM_L4SEC_AES2_CONTEXT_OFFSET			0x01ac
-#define DRA7XX_RM_L4SEC_DES3DES_CONTEXT_OFFSET			0x01b4
-#define DRA7XX_RM_L4SEC_FPKA_CONTEXT_OFFSET			0x01bc
-#define DRA7XX_RM_L4SEC_RNG_CONTEXT_OFFSET			0x01c4
-#define DRA7XX_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET			0x01cc
-#define DRA7XX_PM_L4PER2_UART7_WKDEP_OFFSET			0x01d0
-#define DRA7XX_RM_L4PER2_UART7_CONTEXT_OFFSET			0x01d4
-#define DRA7XX_RM_L4SEC_DMA_CRYPTO_CONTEXT_OFFSET		0x01dc
-#define DRA7XX_PM_L4PER2_UART8_WKDEP_OFFSET			0x01e0
-#define DRA7XX_RM_L4PER2_UART8_CONTEXT_OFFSET			0x01e4
-#define DRA7XX_PM_L4PER2_UART9_WKDEP_OFFSET			0x01e8
-#define DRA7XX_RM_L4PER2_UART9_CONTEXT_OFFSET			0x01ec
-#define DRA7XX_PM_L4PER2_DCAN2_WKDEP_OFFSET			0x01f0
-#define DRA7XX_RM_L4PER2_DCAN2_CONTEXT_OFFSET			0x01f4
-#define DRA7XX_RM_L4SEC_SHA2MD52_CONTEXT_OFFSET			0x01fc
-
-/* PRM.CUSTEFUSE_PRM register offsets */
-#define DRA7XX_PM_CUSTEFUSE_PWRSTCTRL_OFFSET			0x0000
-#define DRA7XX_PM_CUSTEFUSE_PWRSTST_OFFSET			0x0004
-#define DRA7XX_RM_CUSTEFUSE_EFUSE_CTRL_CUST_CONTEXT_OFFSET	0x0024
-
-/* PRM.WKUPAON_PRM register offsets */
-#define DRA7XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET		0x0000
-#define DRA7XX_PM_WKUPAON_WD_TIMER1_WKDEP_OFFSET		0x0004
-#define DRA7XX_RM_WKUPAON_WD_TIMER1_CONTEXT_OFFSET		0x0008
-#define DRA7XX_PM_WKUPAON_WD_TIMER2_WKDEP_OFFSET		0x000c
-#define DRA7XX_RM_WKUPAON_WD_TIMER2_CONTEXT_OFFSET		0x0010
-#define DRA7XX_PM_WKUPAON_GPIO1_WKDEP_OFFSET			0x0014
-#define DRA7XX_RM_WKUPAON_GPIO1_CONTEXT_OFFSET			0x0018
-#define DRA7XX_PM_WKUPAON_TIMER1_WKDEP_OFFSET			0x001c
-#define DRA7XX_RM_WKUPAON_TIMER1_CONTEXT_OFFSET			0x0020
-#define DRA7XX_PM_WKUPAON_TIMER12_WKDEP_OFFSET			0x0024
-#define DRA7XX_RM_WKUPAON_TIMER12_CONTEXT_OFFSET		0x0028
-#define DRA7XX_RM_WKUPAON_COUNTER_32K_CONTEXT_OFFSET		0x0030
-#define DRA7XX_RM_WKUPAON_SAR_RAM_CONTEXT_OFFSET		0x0040
-#define DRA7XX_PM_WKUPAON_KBD_WKDEP_OFFSET			0x0054
-#define DRA7XX_RM_WKUPAON_KBD_CONTEXT_OFFSET			0x0058
-#define DRA7XX_PM_WKUPAON_UART10_WKDEP_OFFSET			0x005c
-#define DRA7XX_RM_WKUPAON_UART10_CONTEXT_OFFSET			0x0060
-#define DRA7XX_PM_WKUPAON_DCAN1_WKDEP_OFFSET			0x0064
-#define DRA7XX_RM_WKUPAON_DCAN1_CONTEXT_OFFSET			0x0068
-#define DRA7XX_PM_WKUPAON_ADC_WKDEP_OFFSET				0x007c
-#define DRA7XX_RM_WKUPAON_ADC_CONTEXT_OFFSET			0x0080
-#define DRA7XX_RM_WKUPAON_SPARE_SAFETY1_CONTEXT_OFFSET		0x0090
-#define DRA7XX_RM_WKUPAON_SPARE_SAFETY2_CONTEXT_OFFSET		0x0098
-#define DRA7XX_RM_WKUPAON_SPARE_SAFETY3_CONTEXT_OFFSET		0x00a0
-#define DRA7XX_RM_WKUPAON_SPARE_SAFETY4_CONTEXT_OFFSET		0x00a8
-#define DRA7XX_RM_WKUPAON_SPARE_UNKNOWN2_CONTEXT_OFFSET		0x00b0
-#define DRA7XX_RM_WKUPAON_SPARE_UNKNOWN3_CONTEXT_OFFSET		0x00b8
-
-/* PRM.WKUPAON_CM register offsets */
-#define DRA7XX_CM_WKUPAON_CLKSTCTRL_OFFSET			0x0000
-#define DRA7XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET		0x0020
-#define DRA7XX_CM_WKUPAON_L4_WKUP_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0020)
-#define DRA7XX_CM_WKUPAON_WD_TIMER1_CLKCTRL_OFFSET		0x0028
-#define DRA7XX_CM_WKUPAON_WD_TIMER1_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0028)
-#define DRA7XX_CM_WKUPAON_WD_TIMER2_CLKCTRL_OFFSET		0x0030
-#define DRA7XX_CM_WKUPAON_WD_TIMER2_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0030)
-#define DRA7XX_CM_WKUPAON_GPIO1_CLKCTRL_OFFSET			0x0038
-#define DRA7XX_CM_WKUPAON_GPIO1_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0038)
-#define DRA7XX_CM_WKUPAON_TIMER1_CLKCTRL_OFFSET			0x0040
-#define DRA7XX_CM_WKUPAON_TIMER1_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0040)
-#define DRA7XX_CM_WKUPAON_TIMER12_CLKCTRL_OFFSET		0x0048
-#define DRA7XX_CM_WKUPAON_TIMER12_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0048)
-#define DRA7XX_CM_WKUPAON_COUNTER_32K_CLKCTRL_OFFSET		0x0050
-#define DRA7XX_CM_WKUPAON_COUNTER_32K_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0050)
-#define DRA7XX_CM_WKUPAON_SAR_RAM_CLKCTRL_OFFSET		0x0060
-#define DRA7XX_CM_WKUPAON_SAR_RAM_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0060)
-#define DRA7XX_CM_WKUPAON_KBD_CLKCTRL_OFFSET			0x0078
-#define DRA7XX_CM_WKUPAON_KBD_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0078)
-#define DRA7XX_CM_WKUPAON_UART10_CLKCTRL_OFFSET			0x0080
-#define DRA7XX_CM_WKUPAON_UART10_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0080)
-#define DRA7XX_CM_WKUPAON_DCAN1_CLKCTRL_OFFSET			0x0088
-#define DRA7XX_CM_WKUPAON_DCAN1_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0088)
-#define DRA7XX_CM_WKUPAON_SCRM_CLKCTRL_OFFSET			0x0090
-#define DRA7XX_CM_WKUPAON_SCRM_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0090)
-#define DRA7XX_CM_WKUPAON_IO_SRCOMP_CLKCTRL_OFFSET		0x0098
-#define DRA7XX_CM_WKUPAON_IO_SRCOMP_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x0098)
-#define DRA7XX_CM_WKUPAON_ADC_CLKCTRL_OFFSET			0x00a0
-#define DRA7XX_CM_WKUPAON_ADC_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00a0)
-#define DRA7XX_CM_WKUPAON_SPARE_SAFETY1_CLKCTRL_OFFSET		0x00b0
-#define DRA7XX_CM_WKUPAON_SPARE_SAFETY1_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00b0)
-#define DRA7XX_CM_WKUPAON_SPARE_SAFETY2_CLKCTRL_OFFSET		0x00b8
-#define DRA7XX_CM_WKUPAON_SPARE_SAFETY2_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00b8)
-#define DRA7XX_CM_WKUPAON_SPARE_SAFETY3_CLKCTRL_OFFSET		0x00c0
-#define DRA7XX_CM_WKUPAON_SPARE_SAFETY3_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00c0)
-#define DRA7XX_CM_WKUPAON_SPARE_SAFETY4_CLKCTRL_OFFSET		0x00c8
-#define DRA7XX_CM_WKUPAON_SPARE_SAFETY4_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00c8)
-#define DRA7XX_CM_WKUPAON_SPARE_UNKNOWN2_CLKCTRL_OFFSET		0x00d0
-#define DRA7XX_CM_WKUPAON_SPARE_UNKNOWN2_CLKCTRL		DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00d0)
-#define DRA7XX_CM_WKUPAON_SPARE_UNKNOWN3_CLKCTRL_OFFSET		0x00d8
-#define DRA7XX_CM_WKUPAON_SPARE_UNKNOWN3_CLKCTRL		DRA7XX_PRM_REGADDR(DRA7XX_PRM_WKUPAON_CM_INST, 0x00d8)
-
-/* PRM.EMU_PRM register offsets */
-#define DRA7XX_PM_EMU_PWRSTCTRL_OFFSET				0x0000
-#define DRA7XX_PM_EMU_PWRSTST_OFFSET				0x0004
-#define DRA7XX_RM_EMU_DEBUGSS_CONTEXT_OFFSET			0x0024
-
-/* PRM.EMU_CM register offsets */
-#define DRA7XX_CM_EMU_CLKSTCTRL_OFFSET				0x0000
-#define DRA7XX_CM_EMU_DEBUGSS_CLKCTRL_OFFSET			0x0004
-#define DRA7XX_CM_EMU_DEBUGSS_CLKCTRL				DRA7XX_PRM_REGADDR(DRA7XX_PRM_EMU_CM_INST, 0x0004)
-#define DRA7XX_CM_EMU_DYNAMICDEP_OFFSET				0x0008
-#define DRA7XX_CM_EMU_MPU_EMU_DBG_CLKCTRL_OFFSET		0x000c
-#define DRA7XX_CM_EMU_MPU_EMU_DBG_CLKCTRL			DRA7XX_PRM_REGADDR(DRA7XX_PRM_EMU_CM_INST, 0x000c)
-
-/* PRM.DSP2_PRM register offsets */
-#define DRA7XX_PM_DSP2_PWRSTCTRL_OFFSET				0x0000
-#define DRA7XX_PM_DSP2_PWRSTST_OFFSET				0x0004
-#define DRA7XX_RM_DSP2_RSTCTRL_OFFSET				0x0010
-#define DRA7XX_RM_DSP2_RSTST_OFFSET				0x0014
-#define DRA7XX_RM_DSP2_DSP2_CONTEXT_OFFSET			0x0024
-
-/* PRM.EVE1_PRM register offsets */
-#define DRA7XX_PM_EVE1_PWRSTCTRL_OFFSET				0x0000
-#define DRA7XX_PM_EVE1_PWRSTST_OFFSET				0x0004
-#define DRA7XX_RM_EVE1_RSTCTRL_OFFSET				0x0010
-#define DRA7XX_RM_EVE1_RSTST_OFFSET				0x0014
-#define DRA7XX_PM_EVE1_EVE1_WKDEP_OFFSET			0x0020
-#define DRA7XX_RM_EVE1_EVE1_CONTEXT_OFFSET			0x0024
-
-/* PRM.EVE2_PRM register offsets */
-#define DRA7XX_PM_EVE2_PWRSTCTRL_OFFSET				0x0000
-#define DRA7XX_PM_EVE2_PWRSTST_OFFSET				0x0004
-#define DRA7XX_RM_EVE2_RSTCTRL_OFFSET				0x0010
-#define DRA7XX_RM_EVE2_RSTST_OFFSET				0x0014
-#define DRA7XX_PM_EVE2_EVE2_WKDEP_OFFSET			0x0020
-#define DRA7XX_RM_EVE2_EVE2_CONTEXT_OFFSET			0x0024
-
-/* PRM.EVE3_PRM register offsets */
-#define DRA7XX_PM_EVE3_PWRSTCTRL_OFFSET				0x0000
-#define DRA7XX_PM_EVE3_PWRSTST_OFFSET				0x0004
-#define DRA7XX_RM_EVE3_RSTCTRL_OFFSET				0x0010
-#define DRA7XX_RM_EVE3_RSTST_OFFSET				0x0014
-#define DRA7XX_PM_EVE3_EVE3_WKDEP_OFFSET			0x0020
-#define DRA7XX_RM_EVE3_EVE3_CONTEXT_OFFSET			0x0024
-
-/* PRM.EVE4_PRM register offsets */
-#define DRA7XX_PM_EVE4_PWRSTCTRL_OFFSET				0x0000
-#define DRA7XX_PM_EVE4_PWRSTST_OFFSET				0x0004
-#define DRA7XX_RM_EVE4_RSTCTRL_OFFSET				0x0010
-#define DRA7XX_RM_EVE4_RSTST_OFFSET				0x0014
-#define DRA7XX_PM_EVE4_EVE4_WKDEP_OFFSET			0x0020
-#define DRA7XX_RM_EVE4_EVE4_CONTEXT_OFFSET			0x0024
-
-/* PRM.RTC_PRM register offsets */
-#define DRA7XX_PM_RTC_RTCSS_WKDEP_OFFSET			0x0000
-#define DRA7XX_RM_RTC_RTCSS_CONTEXT_OFFSET			0x0004
-
-/* PRM.VPE_PRM register offsets */
-#define DRA7XX_PM_VPE_PWRSTCTRL_OFFSET				0x0000
-#define DRA7XX_PM_VPE_PWRSTST_OFFSET				0x0004
-#define DRA7XX_PM_VPE_VPE_WKDEP_OFFSET				0x0020
-#define DRA7XX_RM_VPE_VPE_CONTEXT_OFFSET			0x0024
-
-/* PRM.DEVICE_PRM register offsets */
-#define DRA7XX_PRM_RSTCTRL_OFFSET				0x0000
-#define DRA7XX_PRM_RSTST_OFFSET					0x0004
-#define DRA7XX_PRM_RSTTIME_OFFSET				0x0008
-#define DRA7XX_PRM_CLKREQCTRL_OFFSET				0x000c
-#define DRA7XX_PRM_VOLTCTRL_OFFSET				0x0010
-#define DRA7XX_PRM_PWRREQCTRL_OFFSET				0x0014
-#define DRA7XX_PRM_PSCON_COUNT_OFFSET				0x0018
-#define DRA7XX_PRM_IO_COUNT_OFFSET				0x001c
-#define DRA7XX_PRM_IO_PMCTRL_OFFSET				0x0020
-#define DRA7XX_PRM_VOLTSETUP_WARMRESET_OFFSET			0x0024
-#define DRA7XX_PRM_VOLTSETUP_CORE_OFF_OFFSET			0x0028
-#define DRA7XX_PRM_VOLTSETUP_MPU_OFF_OFFSET			0x002c
-#define DRA7XX_PRM_VOLTSETUP_MM_OFF_OFFSET			0x0030
-#define DRA7XX_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET		0x0034
-#define DRA7XX_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET		0x0038
-#define DRA7XX_PRM_VOLTSETUP_MM_RET_SLEEP_OFFSET		0x003c
-#define DRA7XX_PRM_SRAM_COUNT_OFFSET				0x00bc
-#define DRA7XX_PRM_SRAM_WKUP_SETUP_OFFSET			0x00c0
-#define DRA7XX_PRM_SLDO_CORE_SETUP_OFFSET			0x00c4
-#define DRA7XX_PRM_SLDO_CORE_CTRL_OFFSET			0x00c8
-#define DRA7XX_PRM_SLDO_MPU_SETUP_OFFSET			0x00cc
-#define DRA7XX_PRM_SLDO_MPU_CTRL_OFFSET				0x00d0
-#define DRA7XX_PRM_SLDO_GPU_SETUP_OFFSET			0x00d4
-#define DRA7XX_PRM_SLDO_GPU_CTRL_OFFSET				0x00d8
-#define DRA7XX_PRM_ABBLDO_MPU_SETUP_OFFSET			0x00dc
-#define DRA7XX_PRM_ABBLDO_MPU_CTRL_OFFSET			0x00e0
-#define DRA7XX_PRM_ABBLDO_GPU_SETUP_OFFSET			0x00e4
-#define DRA7XX_PRM_ABBLDO_GPU_CTRL_OFFSET			0x00e8
-#define DRA7XX_PRM_BANDGAP_SETUP_OFFSET				0x00ec
-#define DRA7XX_PRM_DEVICE_OFF_CTRL_OFFSET			0x00f0
-#define DRA7XX_PRM_PHASE1_CNDP_OFFSET				0x00f4
-#define DRA7XX_PRM_PHASE2A_CNDP_OFFSET				0x00f8
-#define DRA7XX_PRM_PHASE2B_CNDP_OFFSET				0x00fc
-#define DRA7XX_PRM_MODEM_IF_CTRL_OFFSET				0x0100
-#define DRA7XX_PRM_VOLTST_MPU_OFFSET				0x0110
-#define DRA7XX_PRM_VOLTST_MM_OFFSET				0x0114
-#define DRA7XX_PRM_SLDO_DSPEVE_SETUP_OFFSET			0x0118
-#define DRA7XX_PRM_SLDO_IVA_SETUP_OFFSET			0x011c
-#define DRA7XX_PRM_ABBLDO_DSPEVE_CTRL_OFFSET			0x0120
-#define DRA7XX_PRM_ABBLDO_IVA_CTRL_OFFSET			0x0124
-#define DRA7XX_PRM_SLDO_DSPEVE_CTRL_OFFSET			0x0128
-#define DRA7XX_PRM_SLDO_IVA_CTRL_OFFSET				0x012c
-#define DRA7XX_PRM_ABBLDO_DSPEVE_SETUP_OFFSET			0x0130
-#define DRA7XX_PRM_ABBLDO_IVA_SETUP_OFFSET			0x0134
 
 #endif
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 65b2d82efa27..fd896f2295a1 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -187,7 +187,7 @@ int omap_prcm_event_to_irq(const char *name)
  *
  * No return value.
  */
-void omap_prcm_irq_cleanup(void)
+static void omap_prcm_irq_cleanup(void)
 {
 	unsigned int irq;
 	int i;
@@ -345,41 +345,6 @@ err:
 }
 
 /**
- * omap2_set_globals_prm - set the PRM base address (for early use)
- * @prm: PRM base virtual address
- *
- * XXX Will be replaced when the PRM/CM drivers are completed.
- */
-void __init omap2_set_globals_prm(void __iomem *prm)
-{
-	prm_base.va = prm;
-}
-
-/**
- * prm_read_reset_sources - return the sources of the SoC's last reset
- *
- * Return a u32 bitmask representing the reset sources that caused the
- * SoC to reset.  The low-level per-SoC functions called by this
- * function remap the SoC-specific reset source bits into an
- * OMAP-common set of reset source bits, defined in
- * arch/arm/mach-omap2/prm.h.  Returns the standardized reset source
- * u32 bitmask from the hardware upon success, or returns (1 <<
- * OMAP_UNKNOWN_RST_SRC_ID_SHIFT) if no low-level read_reset_sources()
- * function was registered.
- */
-u32 prm_read_reset_sources(void)
-{
-	u32 ret = 1 << OMAP_UNKNOWN_RST_SRC_ID_SHIFT;
-
-	if (prm_ll_data->read_reset_sources)
-		ret = prm_ll_data->read_reset_sources();
-	else
-		WARN_ONCE(1, "prm: %s: no mapping function defined for reset sources\n", __func__);
-
-	return ret;
-}
-
-/**
  * prm_was_any_context_lost_old - was device context lost? (old API)
  * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION)
  * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST)
@@ -489,22 +454,6 @@ int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset)
 }
 
 /**
- * omap_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
- *
- * Clear any previously-latched I/O wakeup events and ensure that the
- * I/O wakeup gates are aligned with the current mux settings.
- * Calls SoC specific I/O chain reconfigure function if available,
- * otherwise does nothing.
- */
-void omap_prm_reconfigure_io_chain(void)
-{
-	if (!prcm_irq_setup || !prcm_irq_setup->reconfigure_io_chain)
-		return;
-
-	prcm_irq_setup->reconfigure_io_chain();
-}
-
-/**
  * omap_prm_reset_system - trigger global SW reset
  *
  * Triggers SoC specific global warm reset to reboot the device.
@@ -740,7 +689,7 @@ static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
  * on the DT data. Returns 0 in success, negative error value
  * otherwise.
  */
-int __init omap2_prm_base_init(void)
+static int __init omap2_prm_base_init(void)
 {
 	struct device_node *np;
 	const struct of_device_id *match;
@@ -752,8 +701,10 @@ int __init omap2_prm_base_init(void)
 		data = (struct omap_prcm_init_data *)match->data;
 
 		ret = of_address_to_resource(np, 0, &res);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			return ret;
+		}
 
 		data->mem = ioremap(res.start, resource_size(&res));
 
@@ -799,8 +750,10 @@ int __init omap_prcm_init(void)
 		data = match->data;
 
 		ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			return ret;
+		}
 	}
 
 	omap_cm_init();
diff --git a/arch/arm/mach-omap2/scrm44xx.h b/arch/arm/mach-omap2/scrm44xx.h
index 3f530b89e4c9..2e861aa951f0 100644
--- a/arch/arm/mach-omap2/scrm44xx.h
+++ b/arch/arm/mach-omap2/scrm44xx.h
@@ -22,72 +22,7 @@
 		OMAP2_L4_IO_ADDRESS(OMAP4_SCRM_BASE + (reg))
 
 /* Registers offset */
-#define OMAP4_SCRM_REVISION_SCRM_OFFSET		0x0000
-#define OMAP4_SCRM_REVISION_SCRM		OMAP44XX_SCRM_REGADDR(0x0000)
-#define OMAP4_SCRM_CLKSETUPTIME_OFFSET		0x0100
 #define OMAP4_SCRM_CLKSETUPTIME			OMAP44XX_SCRM_REGADDR(0x0100)
-#define OMAP4_SCRM_PMICSETUPTIME_OFFSET		0x0104
-#define OMAP4_SCRM_PMICSETUPTIME		OMAP44XX_SCRM_REGADDR(0x0104)
-#define OMAP4_SCRM_ALTCLKSRC_OFFSET		0x0110
-#define OMAP4_SCRM_ALTCLKSRC			OMAP44XX_SCRM_REGADDR(0x0110)
-#define OMAP4_SCRM_MODEMCLKM_OFFSET		0x0118
-#define OMAP4_SCRM_MODEMCLKM			OMAP44XX_SCRM_REGADDR(0x0118)
-#define OMAP4_SCRM_D2DCLKM_OFFSET		0x011c
-#define OMAP4_SCRM_D2DCLKM			OMAP44XX_SCRM_REGADDR(0x011c)
-#define OMAP4_SCRM_EXTCLKREQ_OFFSET		0x0200
-#define OMAP4_SCRM_EXTCLKREQ			OMAP44XX_SCRM_REGADDR(0x0200)
-#define OMAP4_SCRM_ACCCLKREQ_OFFSET		0x0204
-#define OMAP4_SCRM_ACCCLKREQ			OMAP44XX_SCRM_REGADDR(0x0204)
-#define OMAP4_SCRM_PWRREQ_OFFSET		0x0208
-#define OMAP4_SCRM_PWRREQ			OMAP44XX_SCRM_REGADDR(0x0208)
-#define OMAP4_SCRM_AUXCLKREQ0_OFFSET		0x0210
-#define OMAP4_SCRM_AUXCLKREQ0			OMAP44XX_SCRM_REGADDR(0x0210)
-#define OMAP4_SCRM_AUXCLKREQ1_OFFSET		0x0214
-#define OMAP4_SCRM_AUXCLKREQ1			OMAP44XX_SCRM_REGADDR(0x0214)
-#define OMAP4_SCRM_AUXCLKREQ2_OFFSET		0x0218
-#define OMAP4_SCRM_AUXCLKREQ2			OMAP44XX_SCRM_REGADDR(0x0218)
-#define OMAP4_SCRM_AUXCLKREQ3_OFFSET		0x021c
-#define OMAP4_SCRM_AUXCLKREQ3			OMAP44XX_SCRM_REGADDR(0x021c)
-#define OMAP4_SCRM_AUXCLKREQ4_OFFSET		0x0220
-#define OMAP4_SCRM_AUXCLKREQ4			OMAP44XX_SCRM_REGADDR(0x0220)
-#define OMAP4_SCRM_AUXCLKREQ5_OFFSET		0x0224
-#define OMAP4_SCRM_AUXCLKREQ5			OMAP44XX_SCRM_REGADDR(0x0224)
-#define OMAP4_SCRM_D2DCLKREQ_OFFSET		0x0234
-#define OMAP4_SCRM_D2DCLKREQ			OMAP44XX_SCRM_REGADDR(0x0234)
-#define OMAP4_SCRM_AUXCLK0_OFFSET		0x0310
-#define OMAP4_SCRM_AUXCLK0			OMAP44XX_SCRM_REGADDR(0x0310)
-#define OMAP4_SCRM_AUXCLK1_OFFSET		0x0314
-#define OMAP4_SCRM_AUXCLK1			OMAP44XX_SCRM_REGADDR(0x0314)
-#define OMAP4_SCRM_AUXCLK2_OFFSET		0x0318
-#define OMAP4_SCRM_AUXCLK2			OMAP44XX_SCRM_REGADDR(0x0318)
-#define OMAP4_SCRM_AUXCLK3_OFFSET		0x031c
-#define OMAP4_SCRM_AUXCLK3			OMAP44XX_SCRM_REGADDR(0x031c)
-#define OMAP4_SCRM_AUXCLK4_OFFSET		0x0320
-#define OMAP4_SCRM_AUXCLK4			OMAP44XX_SCRM_REGADDR(0x0320)
-#define OMAP4_SCRM_AUXCLK5_OFFSET		0x0324
-#define OMAP4_SCRM_AUXCLK5			OMAP44XX_SCRM_REGADDR(0x0324)
-#define OMAP4_SCRM_RSTTIME_OFFSET		0x0400
-#define OMAP4_SCRM_RSTTIME			OMAP44XX_SCRM_REGADDR(0x0400)
-#define OMAP4_SCRM_MODEMRSTCTRL_OFFSET		0x0418
-#define OMAP4_SCRM_MODEMRSTCTRL			OMAP44XX_SCRM_REGADDR(0x0418)
-#define OMAP4_SCRM_D2DRSTCTRL_OFFSET		0x041c
-#define OMAP4_SCRM_D2DRSTCTRL			OMAP44XX_SCRM_REGADDR(0x041c)
-#define OMAP4_SCRM_EXTPWRONRSTCTRL_OFFSET	0x0420
-#define OMAP4_SCRM_EXTPWRONRSTCTRL		OMAP44XX_SCRM_REGADDR(0x0420)
-#define OMAP4_SCRM_EXTWARMRSTST_OFFSET		0x0510
-#define OMAP4_SCRM_EXTWARMRSTST			OMAP44XX_SCRM_REGADDR(0x0510)
-#define OMAP4_SCRM_APEWARMRSTST_OFFSET		0x0514
-#define OMAP4_SCRM_APEWARMRSTST			OMAP44XX_SCRM_REGADDR(0x0514)
-#define OMAP4_SCRM_MODEMWARMRSTST_OFFSET	0x0518
-#define OMAP4_SCRM_MODEMWARMRSTST		OMAP44XX_SCRM_REGADDR(0x0518)
-#define OMAP4_SCRM_D2DWARMRSTST_OFFSET		0x051c
-#define OMAP4_SCRM_D2DWARMRSTST			OMAP44XX_SCRM_REGADDR(0x051c)
-
-/* Registers shifts and masks */
-
-/* REVISION_SCRM */
-#define OMAP4_REV_SHIFT				0
-#define OMAP4_REV_MASK				(0xff << 0)
 
 /* CLKSETUPTIME */
 #define OMAP4_DOWNTIME_SHIFT			16
@@ -95,80 +30,4 @@
 #define OMAP4_SETUPTIME_SHIFT			0
 #define OMAP4_SETUPTIME_MASK			(0xfff << 0)
 
-/* PMICSETUPTIME */
-#define OMAP4_WAKEUPTIME_SHIFT			16
-#define OMAP4_WAKEUPTIME_MASK			(0x3f << 16)
-#define OMAP4_SLEEPTIME_SHIFT			0
-#define OMAP4_SLEEPTIME_MASK			(0x3f << 0)
-
-/* ALTCLKSRC */
-#define OMAP4_ENABLE_EXT_SHIFT			3
-#define OMAP4_ENABLE_EXT_MASK			(1 << 3)
-#define OMAP4_ENABLE_INT_SHIFT			2
-#define OMAP4_ENABLE_INT_MASK			(1 << 2)
-#define OMAP4_ALTCLKSRC_MODE_SHIFT		0
-#define OMAP4_ALTCLKSRC_MODE_MASK		(0x3 << 0)
-
-/* MODEMCLKM */
-#define OMAP4_CLK_32KHZ_SHIFT			0
-#define OMAP4_CLK_32KHZ_MASK			(1 << 0)
-
-/* D2DCLKM */
-#define OMAP4_SYSCLK_SHIFT			1
-#define OMAP4_SYSCLK_MASK			(1 << 1)
-
-/* EXTCLKREQ */
-#define OMAP4_POLARITY_SHIFT			0
-#define OMAP4_POLARITY_MASK			(1 << 0)
-
-/* AUXCLKREQ0 */
-#define OMAP4_MAPPING_SHIFT			2
-#define OMAP4_MAPPING_MASK			(0x7 << 2)
-#define OMAP4_MAPPING_WIDTH			3
-#define OMAP4_ACCURACY_SHIFT			1
-#define OMAP4_ACCURACY_MASK			(1 << 1)
-
-/* AUXCLK0 */
-#define OMAP4_CLKDIV_SHIFT			16
-#define OMAP4_CLKDIV_MASK			(0xf << 16)
-#define OMAP4_CLKDIV_WIDTH			4
-#define OMAP4_DISABLECLK_SHIFT			9
-#define OMAP4_DISABLECLK_MASK			(1 << 9)
-#define OMAP4_ENABLE_SHIFT			8
-#define OMAP4_ENABLE_MASK			(1 << 8)
-#define OMAP4_SRCSELECT_SHIFT			1
-#define OMAP4_SRCSELECT_MASK			(0x3 << 1)
-
-/* RSTTIME */
-#define OMAP4_RSTTIME_SHIFT			0
-#define OMAP4_RSTTIME_MASK			(0xf << 0)
-
-/* MODEMRSTCTRL */
-#define OMAP4_WARMRST_SHIFT			1
-#define OMAP4_WARMRST_MASK			(1 << 1)
-#define OMAP4_COLDRST_SHIFT			0
-#define OMAP4_COLDRST_MASK			(1 << 0)
-
-/* EXTPWRONRSTCTRL */
-#define OMAP4_PWRONRST_SHIFT			1
-#define OMAP4_PWRONRST_MASK			(1 << 1)
-#define OMAP4_ENABLE_EXTPWRONRSTCTRL_SHIFT	0
-#define OMAP4_ENABLE_EXTPWRONRSTCTRL_MASK	(1 << 0)
-
-/* EXTWARMRSTST */
-#define OMAP4_EXTWARMRSTST_SHIFT		0
-#define OMAP4_EXTWARMRSTST_MASK			(1 << 0)
-
-/* APEWARMRSTST */
-#define OMAP4_APEWARMRSTST_SHIFT		1
-#define OMAP4_APEWARMRSTST_MASK			(1 << 1)
-
-/* MODEMWARMRSTST */
-#define OMAP4_MODEMWARMRSTST_SHIFT		2
-#define OMAP4_MODEMWARMRSTST_MASK		(1 << 2)
-
-/* D2DWARMRSTST */
-#define OMAP4_D2DWARMRSTST_SHIFT		3
-#define OMAP4_D2DWARMRSTST_MASK			(1 << 3)
-
 #endif
diff --git a/arch/arm/mach-omap2/scrm54xx.h b/arch/arm/mach-omap2/scrm54xx.h
deleted file mode 100644
index cb6f3e6a7095..000000000000
--- a/arch/arm/mach-omap2/scrm54xx.h
+++ /dev/null
@@ -1,228 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * OMAP54XX SCRM registers and bitfields
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com
- *
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_SCRM_54XX_H
-#define __ARCH_ARM_MACH_OMAP2_SCRM_54XX_H
-
-#define OMAP5_SCRM_BASE		0x4ae0a000
-
-#define OMAP54XX_SCRM_REGADDR(reg)				\
-	OMAP2_L4_IO_ADDRESS(OMAP5_SCRM_BASE + (reg))
-
-/* SCRM */
-
-/* SCRM.SCRM register offsets */
-#define OMAP5_SCRM_REVISION_SCRM_OFFSET		0x0000
-#define OMAP5_SCRM_REVISION_SCRM		OMAP54XX_SCRM_REGADDR(0x0000)
-#define OMAP5_SCRM_CLKSETUPTIME_OFFSET		0x0100
-#define OMAP5_SCRM_CLKSETUPTIME			OMAP54XX_SCRM_REGADDR(0x0100)
-#define OMAP5_SCRM_PMICSETUPTIME_OFFSET		0x0104
-#define OMAP5_SCRM_PMICSETUPTIME		OMAP54XX_SCRM_REGADDR(0x0104)
-#define OMAP5_SCRM_ALTCLKSRC_OFFSET		0x0110
-#define OMAP5_SCRM_ALTCLKSRC			OMAP54XX_SCRM_REGADDR(0x0110)
-#define OMAP5_SCRM_MODEMCLKM_OFFSET		0x0118
-#define OMAP5_SCRM_MODEMCLKM			OMAP54XX_SCRM_REGADDR(0x0118)
-#define OMAP5_SCRM_D2DCLKM_OFFSET		0x011c
-#define OMAP5_SCRM_D2DCLKM			OMAP54XX_SCRM_REGADDR(0x011c)
-#define OMAP5_SCRM_EXTCLKREQ_OFFSET		0x0200
-#define OMAP5_SCRM_EXTCLKREQ			OMAP54XX_SCRM_REGADDR(0x0200)
-#define OMAP5_SCRM_ACCCLKREQ_OFFSET		0x0204
-#define OMAP5_SCRM_ACCCLKREQ			OMAP54XX_SCRM_REGADDR(0x0204)
-#define OMAP5_SCRM_PWRREQ_OFFSET		0x0208
-#define OMAP5_SCRM_PWRREQ			OMAP54XX_SCRM_REGADDR(0x0208)
-#define OMAP5_SCRM_AUXCLKREQ0_OFFSET		0x0210
-#define OMAP5_SCRM_AUXCLKREQ0			OMAP54XX_SCRM_REGADDR(0x0210)
-#define OMAP5_SCRM_AUXCLKREQ1_OFFSET		0x0214
-#define OMAP5_SCRM_AUXCLKREQ1			OMAP54XX_SCRM_REGADDR(0x0214)
-#define OMAP5_SCRM_AUXCLKREQ2_OFFSET		0x0218
-#define OMAP5_SCRM_AUXCLKREQ2			OMAP54XX_SCRM_REGADDR(0x0218)
-#define OMAP5_SCRM_AUXCLKREQ3_OFFSET		0x021c
-#define OMAP5_SCRM_AUXCLKREQ3			OMAP54XX_SCRM_REGADDR(0x021c)
-#define OMAP5_SCRM_AUXCLKREQ4_OFFSET		0x0220
-#define OMAP5_SCRM_AUXCLKREQ4			OMAP54XX_SCRM_REGADDR(0x0220)
-#define OMAP5_SCRM_AUXCLKREQ5_OFFSET		0x0224
-#define OMAP5_SCRM_AUXCLKREQ5			OMAP54XX_SCRM_REGADDR(0x0224)
-#define OMAP5_SCRM_D2DCLKREQ_OFFSET		0x0234
-#define OMAP5_SCRM_D2DCLKREQ			OMAP54XX_SCRM_REGADDR(0x0234)
-#define OMAP5_SCRM_AUXCLK0_OFFSET		0x0310
-#define OMAP5_SCRM_AUXCLK0			OMAP54XX_SCRM_REGADDR(0x0310)
-#define OMAP5_SCRM_AUXCLK1_OFFSET		0x0314
-#define OMAP5_SCRM_AUXCLK1			OMAP54XX_SCRM_REGADDR(0x0314)
-#define OMAP5_SCRM_AUXCLK2_OFFSET		0x0318
-#define OMAP5_SCRM_AUXCLK2			OMAP54XX_SCRM_REGADDR(0x0318)
-#define OMAP5_SCRM_AUXCLK3_OFFSET		0x031c
-#define OMAP5_SCRM_AUXCLK3			OMAP54XX_SCRM_REGADDR(0x031c)
-#define OMAP5_SCRM_AUXCLK4_OFFSET		0x0320
-#define OMAP5_SCRM_AUXCLK4			OMAP54XX_SCRM_REGADDR(0x0320)
-#define OMAP5_SCRM_AUXCLK5_OFFSET		0x0324
-#define OMAP5_SCRM_AUXCLK5			OMAP54XX_SCRM_REGADDR(0x0324)
-#define OMAP5_SCRM_RSTTIME_OFFSET		0x0400
-#define OMAP5_SCRM_RSTTIME			OMAP54XX_SCRM_REGADDR(0x0400)
-#define OMAP5_SCRM_MODEMRSTCTRL_OFFSET		0x0418
-#define OMAP5_SCRM_MODEMRSTCTRL			OMAP54XX_SCRM_REGADDR(0x0418)
-#define OMAP5_SCRM_D2DRSTCTRL_OFFSET		0x041c
-#define OMAP5_SCRM_D2DRSTCTRL			OMAP54XX_SCRM_REGADDR(0x041c)
-#define OMAP5_SCRM_EXTPWRONRSTCTRL_OFFSET	0x0420
-#define OMAP5_SCRM_EXTPWRONRSTCTRL		OMAP54XX_SCRM_REGADDR(0x0420)
-#define OMAP5_SCRM_EXTWARMRSTST_OFFSET		0x0510
-#define OMAP5_SCRM_EXTWARMRSTST			OMAP54XX_SCRM_REGADDR(0x0510)
-#define OMAP5_SCRM_APEWARMRSTST_OFFSET		0x0514
-#define OMAP5_SCRM_APEWARMRSTST			OMAP54XX_SCRM_REGADDR(0x0514)
-#define OMAP5_SCRM_MODEMWARMRSTST_OFFSET	0x0518
-#define OMAP5_SCRM_MODEMWARMRSTST		OMAP54XX_SCRM_REGADDR(0x0518)
-#define OMAP5_SCRM_D2DWARMRSTST_OFFSET		0x051c
-#define OMAP5_SCRM_D2DWARMRSTST			OMAP54XX_SCRM_REGADDR(0x051c)
-
-/*
- * Used by AUXCLKREQ0, AUXCLKREQ1, AUXCLKREQ2, AUXCLKREQ3, AUXCLKREQ4,
- * AUXCLKREQ5, D2DCLKREQ
- */
-#define OMAP5_ACCURACY_SHIFT			1
-#define OMAP5_ACCURACY_WIDTH			0x1
-#define OMAP5_ACCURACY_MASK			(1 << 1)
-
-/* Used by APEWARMRSTST */
-#define OMAP5_APEWARMRSTST_SHIFT		1
-#define OMAP5_APEWARMRSTST_WIDTH		0x1
-#define OMAP5_APEWARMRSTST_MASK			(1 << 1)
-
-/* Used by AUXCLK0, AUXCLK1, AUXCLK2, AUXCLK3, AUXCLK4, AUXCLK5 */
-#define OMAP5_CLKDIV_SHIFT			16
-#define OMAP5_CLKDIV_WIDTH			0x4
-#define OMAP5_CLKDIV_MASK			(0xf << 16)
-
-/* Used by D2DCLKM, MODEMCLKM */
-#define OMAP5_CLK_32KHZ_SHIFT			0
-#define OMAP5_CLK_32KHZ_WIDTH			0x1
-#define OMAP5_CLK_32KHZ_MASK			(1 << 0)
-
-/* Used by D2DRSTCTRL, MODEMRSTCTRL */
-#define OMAP5_COLDRST_SHIFT			0
-#define OMAP5_COLDRST_WIDTH			0x1
-#define OMAP5_COLDRST_MASK			(1 << 0)
-
-/* Used by D2DWARMRSTST */
-#define OMAP5_D2DWARMRSTST_SHIFT		3
-#define OMAP5_D2DWARMRSTST_WIDTH		0x1
-#define OMAP5_D2DWARMRSTST_MASK			(1 << 3)
-
-/* Used by AUXCLK0 */
-#define OMAP5_DISABLECLK_SHIFT			9
-#define OMAP5_DISABLECLK_WIDTH			0x1
-#define OMAP5_DISABLECLK_MASK			(1 << 9)
-
-/* Used by CLKSETUPTIME */
-#define OMAP5_DOWNTIME_SHIFT			16
-#define OMAP5_DOWNTIME_WIDTH			0x6
-#define OMAP5_DOWNTIME_MASK			(0x3f << 16)
-
-/* Used by AUXCLK0, AUXCLK1, AUXCLK2, AUXCLK3, AUXCLK4, AUXCLK5 */
-#define OMAP5_ENABLE_SHIFT			8
-#define OMAP5_ENABLE_WIDTH			0x1
-#define OMAP5_ENABLE_MASK			(1 << 8)
-
-/* Renamed from ENABLE Used by EXTPWRONRSTCTRL */
-#define OMAP5_ENABLE_0_0_SHIFT			0
-#define OMAP5_ENABLE_0_0_WIDTH			0x1
-#define OMAP5_ENABLE_0_0_MASK			(1 << 0)
-
-/* Used by ALTCLKSRC */
-#define OMAP5_ENABLE_EXT_SHIFT			3
-#define OMAP5_ENABLE_EXT_WIDTH			0x1
-#define OMAP5_ENABLE_EXT_MASK			(1 << 3)
-
-/* Used by ALTCLKSRC */
-#define OMAP5_ENABLE_INT_SHIFT			2
-#define OMAP5_ENABLE_INT_WIDTH			0x1
-#define OMAP5_ENABLE_INT_MASK			(1 << 2)
-
-/* Used by EXTWARMRSTST */
-#define OMAP5_EXTWARMRSTST_SHIFT		0
-#define OMAP5_EXTWARMRSTST_WIDTH		0x1
-#define OMAP5_EXTWARMRSTST_MASK			(1 << 0)
-
-/*
- * Used by AUXCLKREQ0, AUXCLKREQ1, AUXCLKREQ2, AUXCLKREQ3, AUXCLKREQ4,
- * AUXCLKREQ5
- */
-#define OMAP5_MAPPING_SHIFT			2
-#define OMAP5_MAPPING_WIDTH			0x3
-#define OMAP5_MAPPING_MASK			(0x7 << 2)
-
-/* Used by ALTCLKSRC */
-#define OMAP5_MODE_SHIFT			0
-#define OMAP5_MODE_WIDTH			0x2
-#define OMAP5_MODE_MASK				(0x3 << 0)
-
-/* Used by MODEMWARMRSTST */
-#define OMAP5_MODEMWARMRSTST_SHIFT		2
-#define OMAP5_MODEMWARMRSTST_WIDTH		0x1
-#define OMAP5_MODEMWARMRSTST_MASK		(1 << 2)
-
-/*
- * Used by ACCCLKREQ, AUXCLK0, AUXCLK1, AUXCLK2, AUXCLK3, AUXCLK4, AUXCLK5,
- * AUXCLKREQ0, AUXCLKREQ1, AUXCLKREQ2, AUXCLKREQ3, AUXCLKREQ4, AUXCLKREQ5,
- * D2DCLKREQ, EXTCLKREQ, PWRREQ
- */
-#define OMAP5_POLARITY_SHIFT			0
-#define OMAP5_POLARITY_WIDTH			0x1
-#define OMAP5_POLARITY_MASK			(1 << 0)
-
-/* Used by EXTPWRONRSTCTRL */
-#define OMAP5_PWRONRST_SHIFT			1
-#define OMAP5_PWRONRST_WIDTH			0x1
-#define OMAP5_PWRONRST_MASK			(1 << 1)
-
-/* Used by REVISION_SCRM */
-#define OMAP5_REV_SHIFT				0
-#define OMAP5_REV_WIDTH				0x8
-#define OMAP5_REV_MASK				(0xff << 0)
-
-/* Used by RSTTIME */
-#define OMAP5_RSTTIME_SHIFT			0
-#define OMAP5_RSTTIME_WIDTH			0x4
-#define OMAP5_RSTTIME_MASK			(0xf << 0)
-
-/* Used by CLKSETUPTIME */
-#define OMAP5_SETUPTIME_SHIFT			0
-#define OMAP5_SETUPTIME_WIDTH			0xc
-#define OMAP5_SETUPTIME_MASK			(0xfff << 0)
-
-/* Used by PMICSETUPTIME */
-#define OMAP5_SLEEPTIME_SHIFT			0
-#define OMAP5_SLEEPTIME_WIDTH			0x6
-#define OMAP5_SLEEPTIME_MASK			(0x3f << 0)
-
-/* Used by AUXCLK0, AUXCLK1, AUXCLK2, AUXCLK3, AUXCLK4, AUXCLK5 */
-#define OMAP5_SRCSELECT_SHIFT			1
-#define OMAP5_SRCSELECT_WIDTH			0x2
-#define OMAP5_SRCSELECT_MASK			(0x3 << 1)
-
-/* Used by D2DCLKM */
-#define OMAP5_SYSCLK_SHIFT			1
-#define OMAP5_SYSCLK_WIDTH			0x1
-#define OMAP5_SYSCLK_MASK			(1 << 1)
-
-/* Used by PMICSETUPTIME */
-#define OMAP5_WAKEUPTIME_SHIFT			16
-#define OMAP5_WAKEUPTIME_WIDTH			0x6
-#define OMAP5_WAKEUPTIME_MASK			(0x3f << 16)
-
-/* Used by D2DRSTCTRL, MODEMRSTCTRL */
-#define OMAP5_WARMRST_SHIFT			1
-#define OMAP5_WARMRST_WIDTH			0x1
-#define OMAP5_WARMRST_MASK			(1 << 1)
-
-#endif
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 2be4106d0dd6..b1bf9e24d442 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -45,7 +45,7 @@ static struct omap2_sms_regs sms_context;
  *
  * Save SMS registers that need to be restored after off mode.
  */
-void omap2_sms_save_context(void)
+static void omap2_sms_save_context(void)
 {
 	sms_context.sms_sysconfig = sms_read_reg(SMS_SYSCONFIG);
 }
@@ -60,55 +60,6 @@ void omap2_sms_restore_context(void)
 	sms_write_reg(sms_context.sms_sysconfig, SMS_SYSCONFIG);
 }
 
-/**
- * omap2_sdrc_get_params - return SDRC register values for a given clock rate
- * @r: SDRC clock rate (in Hz)
- * @sdrc_cs0: chip select 0 ram timings **
- * @sdrc_cs1: chip select 1 ram timings **
- *
- * Return pre-calculated values for the SDRC_ACTIM_CTRLA,
- *  SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL and SDRC_MR registers in sdrc_cs[01]
- *  structs,for a given SDRC clock rate 'r'.
- * These parameters control various timing delays in the SDRAM controller
- *  that are expressed in terms of the number of SDRC clock cycles to
- *  wait; hence the clock rate dependency.
- *
- * Supports 2 different timing parameters for both chip selects.
- *
- * Note 1: the sdrc_init_params_cs[01] must be sorted rate descending.
- * Note 2: If sdrc_init_params_cs_1 is not NULL it must be of same size
- *  as sdrc_init_params_cs_0.
- *
- * Fills in the struct omap_sdrc_params * for each chip select.
- * Returns 0 upon success or -1 upon failure.
- */
-int omap2_sdrc_get_params(unsigned long r,
-			  struct omap_sdrc_params **sdrc_cs0,
-			  struct omap_sdrc_params **sdrc_cs1)
-{
-	struct omap_sdrc_params *sp0, *sp1;
-
-	if (!sdrc_init_params_cs0)
-		return -1;
-
-	sp0 = sdrc_init_params_cs0;
-	sp1 = sdrc_init_params_cs1;
-
-	while (sp0->rate && sp0->rate != r) {
-		sp0++;
-		if (sdrc_init_params_cs1)
-			sp1++;
-	}
-
-	if (!sp0->rate)
-		return -1;
-
-	*sdrc_cs0 = sp0;
-	*sdrc_cs1 = sp1;
-	return 0;
-}
-
-
 void __init omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms)
 {
 	omap2_sdrc_base = sdrc;
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 5bdb832665c0..45b35422b587 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -80,10 +80,6 @@ static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 					  struct omap_sdrc_params *sdrc_cs1) {};
 #endif
 
-int omap2_sdrc_get_params(unsigned long r,
-			  struct omap_sdrc_params **sdrc_cs0,
-			  struct omap_sdrc_params **sdrc_cs1);
-void omap2_sms_save_context(void);
 void omap2_sms_restore_context(void);
 
 struct memory_timings {
@@ -95,7 +91,6 @@ struct memory_timings {
 };
 
 extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
-struct omap_sdrc_params *rx51_get_sdram_timings(void);
 
 u32 omap2xxx_sdrc_dll_is_unlocked(void);
 u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
diff --git a/arch/arm/mach-omap2/serial.h b/arch/arm/mach-omap2/serial.h
deleted file mode 100644
index c4014f013df0..000000000000
--- a/arch/arm/mach-omap2/serial.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <mach/serial.h>
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index c4e97d35c310..781a131b40a6 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -465,7 +465,7 @@ l2_inv_gp:
 	mov	r12, #0x2
 	smc	#0			@ Call SMI monitor (smieq)
 logic_l1_restore:
-	adr	r0, l2dis_3630_offset	@ adress for offset
+	adr	r0, l2dis_3630_offset	@ address for offset
 	ldr	r1, [r0]		@ value for offset
 	ldr	r1, [r0, r1]		@ value at l2dis_3630
 	cmp	r1, #0x1		@ Test if L2 re-enable needed on 3630
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index 62df666c2bd0..d2133423b0c9 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -26,8 +26,6 @@
 #include "control.h"
 #include "pm.h"
 
-static bool sr_enable_on_init;
-
 /* Read EFUSE values from control registers for OMAP3430 */
 static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 				struct omap_sr_data *sr_data)
@@ -88,34 +86,26 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 
 extern struct omap_sr_data omap_sr_pdata[];
 
-static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
+static int __init sr_init_by_name(const char *name, const char *voltdm)
 {
 	struct omap_sr_data *sr_data = NULL;
 	struct omap_volt_data *volt_data;
-	struct omap_smartreflex_dev_attr *sr_dev_attr;
 	static int i;
 
-	if (!strncmp(oh->name, "smartreflex_mpu_iva", 20) ||
-	    !strncmp(oh->name, "smartreflex_mpu", 16))
+	if (!strncmp(name, "smartreflex_mpu_iva", 20) ||
+	    !strncmp(name, "smartreflex_mpu", 16))
 		sr_data = &omap_sr_pdata[OMAP_SR_MPU];
-	else if (!strncmp(oh->name, "smartreflex_core", 17))
+	else if (!strncmp(name, "smartreflex_core", 17))
 		sr_data = &omap_sr_pdata[OMAP_SR_CORE];
-	else if (!strncmp(oh->name, "smartreflex_iva", 16))
+	else if (!strncmp(name, "smartreflex_iva", 16))
 		sr_data = &omap_sr_pdata[OMAP_SR_IVA];
 
 	if (!sr_data) {
-		pr_err("%s: Unknown instance %s\n", __func__, oh->name);
+		pr_err("%s: Unknown instance %s\n", __func__, name);
 		return -EINVAL;
 	}
 
-	sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
-	if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
-		pr_err("%s: No voltage domain specified for %s. Cannot initialize\n",
-		       __func__, oh->name);
-		goto exit;
-	}
-
-	sr_data->name = oh->name;
+	sr_data->name = name;
 	if (cpu_is_omap343x())
 		sr_data->ip_type = 1;
 	else
@@ -136,10 +126,10 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 		}
 	}
 
-	sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name);
+	sr_data->voltdm = voltdm_lookup(voltdm);
 	if (!sr_data->voltdm) {
 		pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
-			__func__, sr_dev_attr->sensor_voltdm_name);
+			__func__, voltdm);
 		goto exit;
 	}
 
@@ -152,24 +142,69 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 
 	sr_set_nvalues(volt_data, sr_data);
 
-	sr_data->enable_on_init = sr_enable_on_init;
-
 exit:
 	i++;
 
 	return 0;
 }
 
-/*
- * API to be called from board files to enable smartreflex
- * autocompensation at init.
- */
-void __init omap_enable_smartreflex_on_init(void)
+#ifdef CONFIG_OMAP_HWMOD
+static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
+{
+	struct omap_smartreflex_dev_attr *sr_dev_attr;
+
+	sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
+	if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
+		pr_err("%s: No voltage domain specified for %s. Cannot initialize\n",
+		       __func__, oh->name);
+		return 0;
+	}
+
+	return sr_init_by_name(oh->name, sr_dev_attr->sensor_voltdm_name);
+}
+#else
+static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 {
-	sr_enable_on_init = true;
+	return -EINVAL;
 }
+#endif
+
+static const char * const omap4_sr_instances[] = {
+	"mpu",
+	"iva",
+	"core",
+};
+
+static const char * const dra7_sr_instances[] = {
+	"mpu",
+	"core",
+};
 
 int __init omap_devinit_smartreflex(void)
 {
+	const char * const *sr_inst = NULL;
+	int i, nr_sr = 0;
+
+	if (soc_is_omap44xx()) {
+		sr_inst = omap4_sr_instances;
+		nr_sr = ARRAY_SIZE(omap4_sr_instances);
+
+	} else if (soc_is_dra7xx()) {
+		sr_inst = dra7_sr_instances;
+		nr_sr = ARRAY_SIZE(dra7_sr_instances);
+	}
+
+	if (nr_sr) {
+		const char *name, *voltdm;
+
+		for (i = 0; i < nr_sr; i++) {
+			name = kasprintf(GFP_KERNEL, "smartreflex_%s", sr_inst[i]);
+			voltdm = sr_inst[i];
+			sr_init_by_name(name, voltdm);
+		}
+
+		return 0;
+	}
+
 	return omap_hwmod_for_each_by_class("smartreflex", sr_dev_init, NULL);
 }
diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c
index c98855f5594b..815d390109d2 100644
--- a/arch/arm/mach-omap2/sram.c
+++ b/arch/arm/mach-omap2/sram.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/set_memory.h>
 
 #include <asm/fncpy.h>
 #include <asm/tlb.h>
@@ -47,8 +48,67 @@
 #define ROUND_DOWN(value,boundary)	((value) & (~((boundary)-1)))
 
 static unsigned long omap_sram_start;
-static unsigned long omap_sram_skip;
 static unsigned long omap_sram_size;
+static void __iomem *omap_sram_base;
+static unsigned long omap_sram_skip;
+static void __iomem *omap_sram_ceil;
+
+/*
+ * Memory allocator for SRAM: calculates the new ceiling address
+ * for pushing a function using the fncpy API.
+ *
+ * Note that fncpy requires the returned address to be aligned
+ * to an 8-byte boundary.
+ */
+static void *omap_sram_push_address(unsigned long size)
+{
+	unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
+
+	available = omap_sram_ceil - (omap_sram_base + omap_sram_skip);
+
+	if (size > available) {
+		pr_err("Not enough space in SRAM\n");
+		return NULL;
+	}
+
+	new_ceil -= size;
+	new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN);
+	omap_sram_ceil = IOMEM(new_ceil);
+
+	return (void __force *)omap_sram_ceil;
+}
+
+void *omap_sram_push(void *funcp, unsigned long size)
+{
+	void *sram;
+	unsigned long base;
+	int pages;
+	void *dst = NULL;
+
+	sram = omap_sram_push_address(size);
+	if (!sram)
+		return NULL;
+
+	base = (unsigned long)sram & PAGE_MASK;
+	pages = PAGE_ALIGN(size) / PAGE_SIZE;
+
+	set_memory_rw(base, pages);
+
+	dst = fncpy(sram, funcp, size);
+
+	set_memory_rox(base, pages);
+
+	return dst;
+}
+
+/*
+ * The SRAM context is lost during off-idle and stack
+ * needs to be reset.
+ */
+static void omap_sram_reset(void)
+{
+	omap_sram_ceil = omap_sram_base + omap_sram_size;
+}
 
 /*
  * Depending on the target RAMFS firewall setup, the public usable amount of
@@ -119,6 +179,8 @@ static void __init omap_detect_sram(void)
  */
 static void __init omap2_map_sram(void)
 {
+	unsigned long base;
+	int pages;
 	int cached = 1;
 
 	if (cpu_is_omap34xx()) {
@@ -132,8 +194,29 @@ static void __init omap2_map_sram(void)
 		cached = 0;
 	}
 
-	omap_map_sram(omap_sram_start, omap_sram_size,
-			omap_sram_skip, cached);
+	if (omap_sram_size == 0)
+		return;
+
+	omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
+	omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size, cached);
+	if (!omap_sram_base) {
+		pr_err("SRAM: Could not map\n");
+		return;
+	}
+
+	omap_sram_reset();
+
+	/*
+	 * Looks like we need to preserve some bootloader code at the
+	 * beginning of SRAM for jumping to flash for reboot to work...
+	 */
+	memset_io(omap_sram_base + omap_sram_skip, 0,
+		  omap_sram_size - omap_sram_skip);
+
+	base = (unsigned long)omap_sram_base;
+	pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE;
+
+	set_memory_rox(base, pages);
 }
 
 static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h
index 447bd3eed0fd..030cabc39821 100644
--- a/arch/arm/mach-omap2/sram.h
+++ b/arch/arm/mach-omap2/sram.h
@@ -4,7 +4,6 @@
  */
 
 #ifndef __ASSEMBLY__
-#include <plat/sram.h>
 
 extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
 				u32 base_cs, u32 force_unlock);
@@ -14,9 +13,9 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
 extern void omap3_sram_restore_context(void);
 
-/* Do not use these */
-extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap24xx_sram_reprogram_clock_sz;
+extern int __init omap_sram_init(void);
+
+extern void *omap_sram_push(void *funcp, unsigned long size);
 
 extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
 						u32 base_cs, u32 force_unlock);
diff --git a/arch/arm/mach-omap2/ti81xx.h b/arch/arm/mach-omap2/ti81xx.h
index 192b0e7d3eb4..fe9f7f388cbd 100644
--- a/arch/arm/mach-omap2/ti81xx.h
+++ b/arch/arm/mach-omap2/ti81xx.h
@@ -1,16 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * This file contains the address data for various TI81XX modules.
  *
  * Copyright (C) 2010 Texas Instruments, Inc. - https://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __ASM_ARCH_TI81XX_H
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 620ba69c8f11..5677c4a08f37 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -76,6 +76,7 @@ static void __init realtime_counter_init(void)
 	}
 
 	rate = clk_get_rate(sys_clk);
+	clk_put(sys_clk);
 
 	if (soc_is_dra7xx()) {
 		/*
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index a0c4c42e56b9..18fa52f828dc 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -97,7 +97,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps)
 }
 
 /* tusb driver calls this when it changes the chip's clocking */
-int tusb6010_platform_retime(unsigned is_refclk)
+static int tusb6010_platform_retime(unsigned is_refclk)
 {
 	static const char	error[] =
 		KERN_ERR "tusb6010 %s retime error %d\n";
@@ -121,7 +121,6 @@ int tusb6010_platform_retime(unsigned is_refclk)
 done:
 	return status;
 }
-EXPORT_SYMBOL_GPL(tusb6010_platform_retime);
 
 static struct resource tusb_resources[] = {
 	/* Order is significant!  The start/end fields
@@ -154,8 +153,7 @@ static struct platform_device tusb_device = {
 
 
 /* this may be called only from board-*.c setup code */
-int __init
-tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
+int __init tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
 		unsigned ps_refclk, unsigned waitpin,
 		unsigned async, unsigned sync,
 		unsigned irq, unsigned dmachan)
diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
deleted file mode 100644
index 740a499befce..000000000000
--- a/arch/arm/mach-omap2/usb.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <linux/platform_data/usb-omap.h>
-
-/* AM35x */
-/* USB 2.0 PHY Control */
-#define CONF2_PHY_GPIOMODE	(1 << 23)
-#define CONF2_OTGMODE		(3 << 14)
-#define CONF2_NO_OVERRIDE	(0 << 14)
-#define CONF2_FORCE_HOST	(1 << 14)
-#define CONF2_FORCE_DEVICE	(2 << 14)
-#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
-#define CONF2_SESENDEN		(1 << 13)
-#define CONF2_VBDTCTEN		(1 << 12)
-#define CONF2_REFFREQ_24MHZ	(2 << 8)
-#define CONF2_REFFREQ_26MHZ	(7 << 8)
-#define CONF2_REFFREQ_13MHZ	(6 << 8)
-#define CONF2_REFFREQ		(0xf << 8)
-#define CONF2_PHYCLKGD		(1 << 7)
-#define CONF2_VBUSSENSE		(1 << 6)
-#define CONF2_PHY_PLLON		(1 << 5)
-#define CONF2_RESET		(1 << 4)
-#define CONF2_PHYPWRDN		(1 << 3)
-#define CONF2_OTGPWRDN		(1 << 2)
-#define CONF2_DATPOL		(1 << 1)
-
-/* TI81XX specific definitions */
-#define USBCTRL0	0x620
-#define USBSTAT0	0x624
-
-/* TI816X PHY controls bits */
-#define TI816X_USBPHY0_NORMAL_MODE	(1 << 0)
-#define TI816X_USBPHY_REFCLK_OSC	(1 << 8)
-
-/* TI814X PHY controls bits */
-#define USBPHY_CM_PWRDN		(1 << 0)
-#define USBPHY_OTG_PWRDN	(1 << 1)
-#define USBPHY_CHGDET_DIS	(1 << 2)
-#define USBPHY_CHGDET_RSTRT	(1 << 3)
-#define USBPHY_SRCONDM		(1 << 4)
-#define USBPHY_SINKONDP		(1 << 5)
-#define USBPHY_CHGISINK_EN	(1 << 6)
-#define USBPHY_CHGVSRC_EN	(1 << 7)
-#define USBPHY_DMPULLUP		(1 << 8)
-#define USBPHY_DPPULLUP		(1 << 9)
-#define USBPHY_CDET_EXTCTL	(1 << 10)
-#define USBPHY_GPIO_MODE	(1 << 12)
-#define USBPHY_DPOPBUFCTL	(1 << 13)
-#define USBPHY_DMOPBUFCTL	(1 << 14)
-#define USBPHY_DPINPUT		(1 << 15)
-#define USBPHY_DMINPUT		(1 << 16)
-#define USBPHY_DPGPIO_PD	(1 << 17)
-#define USBPHY_DMGPIO_PD	(1 << 18)
-#define USBPHY_OTGVDET_EN	(1 << 19)
-#define USBPHY_OTGSESSEND_EN	(1 << 20)
-#define USBPHY_DATA_POLARITY	(1 << 23)
-
-struct usbhs_phy_data {
-	int port;		/* 1 indexed port number */
-	int reset_gpio;
-	int vcc_gpio;
-	bool vcc_polarity;	/* 1 active high, 0 active low */
-};
-
-extern void usb_musb_init(struct omap_musb_board_data *board_data);
-extern void usbhs_init(struct usbhs_omap_platform_data *pdata);
-extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys);
-
-extern void am35x_musb_reset(void);
-extern void am35x_musb_phy_power(u8 on);
-extern void am35x_musb_clear_irq(void);
-extern void am35x_set_mode(u8 musb_mode);
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 86f1ac4c2412..fc26b96a20cc 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * OMAP Voltage Controller (VC) interface
  *
  * Copyright (C) 2011 Texas Instruments, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/kernel.h>
 #include <linux/delay.h>
@@ -805,21 +802,6 @@ static u8 omap_vc_calc_vsel(struct voltagedomain *voltdm, u32 uvolt)
 	return voltdm->pmic->uv_to_vsel(uvolt);
 }
 
-#ifdef CONFIG_PM
-/**
- * omap_pm_setup_sr_i2c_pcb_length - set length of SR I2C traces on PCB
- * @mm: length of the PCB trace in millimetres
- *
- * Sets the PCB trace length for the I2C channel. By default uses 63mm.
- * This is needed for properly calculating the capacitance value for
- * the PCB trace, and for setting the SR I2C channel timing parameters.
- */
-void __init omap_pm_setup_sr_i2c_pcb_length(u32 mm)
-{
-	sr_i2c_pcb_length = mm;
-}
-#endif
-
 void __init omap_vc_init_channel(struct voltagedomain *voltdm)
 {
 	struct omap_vc_channel *vc = voltdm->vc;
@@ -895,4 +877,3 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
 	else if (cpu_is_omap44xx())
 		omap4_vc_init_channel(voltdm);
 }
-
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 0a0c771dbb0a..49e8bc69abdd 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -67,7 +67,7 @@ unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
  * This API should be called by the kernel to do the voltage scaling
  * for a particular voltage domain during DVFS.
  */
-int voltdm_scale(struct voltagedomain *voltdm,
+static int voltdm_scale(struct voltagedomain *voltdm,
 		 unsigned long target_volt)
 {
 	int ret, i;
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 4a225f9559a5..e610f63a020d 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -163,8 +163,6 @@ extern void omap54xx_voltagedomains_init(void);
 
 struct voltagedomain *voltdm_lookup(const char *name);
 void voltdm_init(struct voltagedomain **voltdm_list);
-int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm);
-int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
 void voltdm_reset(struct voltagedomain *voltdm);
 unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
 #endif
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index e94a61901ffd..ee449ca032d2 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -1,11 +1,13 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_ORION5X
 	bool "Marvell Orion"
-	depends on MMU && ARCH_MULTI_V5
+	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select CPU_FEROCEON
 	select GPIOLIB
 	select MVEBU_MBUS
 	select FORCE_PCI
+	select PCI_QUIRKS
 	select PHYLIB if NETDEVICES
 	select PLAT_ORION_LEGACY
 	help
@@ -26,20 +28,6 @@ config ARCH_ORION5X_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion5x using flattened device tree.
 
-config MACH_DB88F5281
-	bool "Marvell Orion-2 Development Board"
-	select I2C_BOARDINFO if I2C
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-2 (88F5281) Development Board
-
-config MACH_RD88F5182
-	bool "Marvell Orion-NAS Reference Design"
-	select I2C_BOARDINFO if I2C
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-NAS (88F5182) RD2
-
 config MACH_RD88F5182_DT
 	bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)"
 	select ARCH_ORION5X_DT
@@ -51,6 +39,7 @@ config MACH_RD88F5182_DT
 config MACH_KUROBOX_PRO
 	bool "KuroBox Pro"
 	select I2C_BOARDINFO if I2C
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  KuroBox Pro platform.
@@ -58,24 +47,28 @@ config MACH_KUROBOX_PRO
 config MACH_DNS323
 	bool "D-Link DNS-323"
 	select I2C_BOARDINFO if I2C
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  D-Link DNS-323 platform.
 
 config MACH_TS209
 	bool "QNAP TS-109/TS-209"
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-109/TS-209 platform.
 
 config MACH_TERASTATION_PRO2
 	bool "Buffalo Terastation Pro II/Live"
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo Terastation Pro II/Live platform.
 
 config MACH_LINKSTATION_PRO
 	bool "Buffalo Linkstation Pro/Live"
+	depends on ATAGS
 	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -89,33 +82,23 @@ config MACH_LINKSTATION_MINI
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo Linkstation Mini (LS-WSGL) platform.
 
-config MACH_LINKSTATION_LS_HGL
-	bool "Buffalo Linkstation LS-HGL"
-	select I2C_BOARDINFO if I2C
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Buffalo Linkstation LS-HGL platform.
-
 config MACH_TS409
 	bool "QNAP TS-409"
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-409 platform.
 
-config MACH_WRT350N_V2
-	bool "Linksys WRT350N v2"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Linksys WRT350N v2 platform.
-
 config MACH_TS78XX
 	bool "Technologic Systems TS-78xx"
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-78xx platform.
 
 config MACH_MV2120
 	bool "HP Media Vault mv2120"
+	depends on ATAGS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  HP Media Vault mv2120 or mv5100.
@@ -129,6 +112,7 @@ config MACH_D2NET_DT
 
 config MACH_NET2BIG
 	bool "LaCie 2Big Network"
+	depends on ATAGS
 	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -141,28 +125,4 @@ config MACH_MSS2_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Maxtor Shared Storage II platform.
 
-config MACH_WNR854T
-	bool "Netgear WNR854T"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Netgear WNR854T platform.
-
-config MACH_RD88F5181L_GE
-	bool "Marvell Orion-VoIP GE Reference Design"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-VoIP GE (88F5181L) RD.
-
-config MACH_RD88F5181L_FXO
-	bool "Marvell Orion-VoIP FXO Reference Design"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-VoIP FXO (88F5181L) RD.
-
-config MACH_RD88F6183AP_GE
-	bool "Marvell Orion-1-90 AP GE Reference Design"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-1-90 (88F6183) AP GE RD.
-
 endif
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 1a585a62d5e6..6f54d7fef27a 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -1,24 +1,16 @@
 # SPDX-License-Identifier: GPL-2.0
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
 
 obj-y				+= common.o pci.o irq.o mpp.o
-obj-$(CONFIG_MACH_DB88F5281)	+= db88f5281-setup.o
-obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
 obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
 obj-$(CONFIG_MACH_TERASTATION_PRO2)	+= terastation_pro2-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
-obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
 obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
 obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o tsx09-common.o
 obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o tsx09-common.o
-obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o
 obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setup.o
 obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
 obj-$(CONFIG_MACH_NET2BIG)	+= net2big-setup.o
-obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
-obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
-obj-$(CONFIG_MACH_RD88F5181L_FXO)	+= rd88f5181l-fxo-setup.o
-obj-$(CONFIG_MACH_RD88F6183AP_GE)	+= rd88f6183ap-ge-setup.o
 
 obj-$(CONFIG_ARCH_ORION5X_DT)		+= board-dt.o
 obj-$(CONFIG_MACH_D2NET_DT)	+= board-d2net.o
diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c
index a89376a5cd92..0297e302d7bc 100644
--- a/arch/arm/mach-orion5x/board-d2net.c
+++ b/arch/arm/mach-orion5x/board-d2net.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/board-d2net.c
  *
  * LaCie d2Network and Big Disk Network NAS setup
  *
  * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
index 3d36f1d95196..e3736ffc8347 100644
--- a/arch/arm/mach-orion5x/board-dt.c
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2012 (C), Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
  * arch/arm/mach-orion5x/board-dt.c
  *
  * Flattened Device Tree board initialization
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-orion5x/board-rd88f5182.c b/arch/arm/mach-orion5x/board-rd88f5182.c
index b7b0f52f4c0a..1c14e49a90a6 100644
--- a/arch/arm/mach-orion5x/board-rd88f5182.c
+++ b/arch/arm/mach-orion5x/board-rd88f5182.c
@@ -1,17 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/rd88f5182-setup.c
  *
  * Marvell Orion-NAS Reference Design Setup
  *
  * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
diff --git a/arch/arm/mach-orion5x/bridge-regs.h b/arch/arm/mach-orion5x/bridge-regs.h
index 305598eaaee1..fe85bc5b131f 100644
--- a/arch/arm/mach-orion5x/bridge-regs.h
+++ b/arch/arm/mach-orion5x/bridge-regs.h
@@ -1,10 +1,5 @@
-/*
- * Orion CPU Bridge Registers
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Orion CPU Bridge Registers */
 
 #ifndef __ASM_ARCH_BRIDGE_REGS_H
 #define __ASM_ARCH_BRIDGE_REGS_H
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 7bcb41137bbf..df056d60b675 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/common.c
  *
  * Core functions for Marvell Orion 5x SoCs
  *
  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
@@ -21,7 +18,6 @@
 #include <linux/delay.h>
 #include <linux/clk-provider.h>
 #include <linux/cpu.h>
-#include <linux/platform_data/dsa.h>
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <asm/system_misc.h>
@@ -104,15 +100,6 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 
 
 /*****************************************************************************
- * Ethernet switch
- ****************************************************************************/
-void __init orion5x_eth_switch_init(struct dsa_chip_data *d)
-{
-	orion_ge00_switch_init(d);
-}
-
-
-/*****************************************************************************
  * I2C
  ****************************************************************************/
 void __init orion5x_i2c_init(void)
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index eb96009e21c4..f2e0577bf50f 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -4,7 +4,6 @@
 
 #include <linux/reboot.h>
 
-struct dsa_chip_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
@@ -42,7 +41,6 @@ void orion5x_setup_wins(void);
 void orion5x_ehci0_init(void);
 void orion5x_ehci1_init(void);
 void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
-void orion5x_eth_switch_init(struct dsa_chip_data *d);
 void orion5x_i2c_init(void);
 void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
 void orion5x_spi_init(void);
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
deleted file mode 100644
index 39eae10ac8de..000000000000
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ /dev/null
@@ -1,379 +0,0 @@
-/*
- * arch/arm/mach-orion5x/db88f5281-setup.c
- *
- * Marvell Orion-2 Development Board Setup
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/timer.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <linux/platform_data/mtd-orion_nand.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * DB-88F5281 on board devices
- ****************************************************************************/
-
-/*
- * 512K NOR flash Device bus boot chip select
- */
-
-#define DB88F5281_NOR_BOOT_BASE		0xf4000000
-#define DB88F5281_NOR_BOOT_SIZE		SZ_512K
-
-/*
- * 7-Segment on Device bus chip select 0
- */
-
-#define DB88F5281_7SEG_BASE		0xfa000000
-#define DB88F5281_7SEG_SIZE		SZ_1K
-
-/*
- * 32M NOR flash on Device bus chip select 1
- */
-
-#define DB88F5281_NOR_BASE		0xfc000000
-#define DB88F5281_NOR_SIZE		SZ_32M
-
-/*
- * 32M NAND flash on Device bus chip select 2
- */
-
-#define DB88F5281_NAND_BASE		0xfa800000
-#define DB88F5281_NAND_SIZE		SZ_1K
-
-/*
- * PCI
- */
-
-#define DB88F5281_PCI_SLOT0_OFFS		7
-#define DB88F5281_PCI_SLOT0_IRQ_PIN		12
-#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN	13
-
-/*****************************************************************************
- * 512M NOR Flash on Device bus Boot CS
- ****************************************************************************/
-
-static struct physmap_flash_data db88f5281_boot_flash_data = {
-	.width		= 1,	/* 8 bit bus width */
-};
-
-static struct resource db88f5281_boot_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DB88F5281_NOR_BOOT_BASE,
-	.end		= DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device db88f5281_boot_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &db88f5281_boot_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &db88f5281_boot_flash_resource,
-};
-
-/*****************************************************************************
- * 32M NOR Flash on Device bus CS1
- ****************************************************************************/
-
-static struct physmap_flash_data db88f5281_nor_flash_data = {
-	.width		= 4,	/* 32 bit bus width */
-};
-
-static struct resource db88f5281_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DB88F5281_NOR_BASE,
-	.end		= DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1,
-};
-
-static struct platform_device db88f5281_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &db88f5281_nor_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &db88f5281_nor_flash_resource,
-};
-
-/*****************************************************************************
- * 32M NAND Flash on Device bus CS2
- ****************************************************************************/
-
-static struct mtd_partition db88f5281_nand_parts[] = {
-	{
-		.name = "kernel",
-		.offset = 0,
-		.size = SZ_2M,
-	}, {
-		.name = "root",
-		.offset = SZ_2M,
-		.size = (SZ_16M - SZ_2M),
-	}, {
-		.name = "user",
-		.offset = SZ_16M,
-		.size = SZ_8M,
-	}, {
-		.name = "recovery",
-		.offset = (SZ_16M + SZ_8M),
-		.size = SZ_8M,
-	},
-};
-
-static struct resource db88f5281_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DB88F5281_NAND_BASE,
-	.end		= DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1,
-};
-
-static struct orion_nand_data db88f5281_nand_data = {
-	.parts		= db88f5281_nand_parts,
-	.nr_parts	= ARRAY_SIZE(db88f5281_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-};
-
-static struct platform_device db88f5281_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &db88f5281_nand_data,
-	},
-	.resource	= &db88f5281_nand_resource,
-	.num_resources	= 1,
-};
-
-/*****************************************************************************
- * 7-Segment on Device bus CS0
- * Dummy counter every 2 sec
- ****************************************************************************/
-
-static void __iomem *db88f5281_7seg;
-static struct timer_list db88f5281_timer;
-
-static void db88f5281_7seg_event(struct timer_list *unused)
-{
-	static int count = 0;
-	writel(0, db88f5281_7seg + (count << 4));
-	count = (count + 1) & 7;
-	mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
-}
-
-static int __init db88f5281_7seg_init(void)
-{
-	if (machine_is_db88f5281()) {
-		db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE,
-					DB88F5281_7SEG_SIZE);
-		if (!db88f5281_7seg) {
-			printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n");
-			return -EIO;
-		}
-		timer_setup(&db88f5281_timer, db88f5281_7seg_event, 0);
-		mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
-	}
-
-	return 0;
-}
-
-__initcall(db88f5281_7seg_init);
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-
-static void __init db88f5281_pci_preinit(void)
-{
-	int pin;
-
-	/*
-	 * Configure PCI GPIO IRQ pins
-	 */
-	pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
-	if (gpio_request(pin, "PCI Int1") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "db88f5281_pci_preinit failed to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
-	}
-
-	pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
-	if (gpio_request(pin, "PCI Int2") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "db88f5281_pci_preinit failed "
-					"to set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
-	}
-}
-
-static int __init db88f5281_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * PCI IRQs are connected via GPIOs.
-	 */
-	switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
-	case 0:
-		return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN);
-	case 1:
-	case 2:
-		return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN);
-	default:
-		return -1;
-	}
-}
-
-static struct hw_pci db88f5281_pci __initdata = {
-	.nr_controllers	= 2,
-	.preinit	= db88f5281_pci_preinit,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= db88f5281_pci_map_irq,
-};
-
-static int __init db88f5281_pci_init(void)
-{
-	if (machine_is_db88f5281())
-		pci_common_init(&db88f5281_pci);
-
-	return 0;
-}
-
-subsys_initcall(db88f5281_pci_init);
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-static struct mv643xx_eth_platform_data db88f5281_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * RTC DS1339 on I2C bus
- ****************************************************************************/
-static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
-	I2C_BOARD_INFO("ds1339", 0x68),
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int db88f5281_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* USB Over Current */
-	MPP1_GPIO,		/* USB Vbat input */
-	MPP2_PCI_ARB,		/* PCI_REQn[2] */
-	MPP3_PCI_ARB,		/* PCI_GNTn[2] */
-	MPP4_PCI_ARB,		/* PCI_REQn[3] */
-	MPP5_PCI_ARB,		/* PCI_GNTn[3] */
-	MPP6_GPIO,		/* JP0, CON17.2 */
-	MPP7_GPIO,		/* JP1, CON17.1 */
-	MPP8_GPIO,		/* JP2, CON11.2 */
-	MPP9_GPIO,		/* JP3, CON11.3 */
-	MPP10_GPIO,		/* RTC int */
-	MPP11_GPIO,		/* Baud Rate Generator */
-	MPP12_GPIO,		/* PCI int 1 */
-	MPP13_GPIO,		/* PCI int 2 */
-	MPP14_NAND,		/* NAND_REn[2] */
-	MPP15_NAND,		/* NAND_WEn[2] */
-	MPP16_UART,		/* UART1_RX */
-	MPP17_UART,		/* UART1_TX */
-	MPP18_UART,		/* UART1_CTSn */
-	MPP19_UART,		/* UART1_RTSn */
-	0,
-};
-
-static void __init db88f5281_init(void)
-{
-	/*
-	 * Basic Orion setup. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(db88f5281_mpp_modes);
-	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&db88f5281_eth_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-	orion5x_uart1_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    DB88F5281_NOR_BOOT_BASE,
-				    DB88F5281_NOR_BOOT_SIZE);
-	platform_device_register(&db88f5281_boot_flash);
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
-				    ORION_MBUS_DEVBUS_ATTR(0),
-				    DB88F5281_7SEG_BASE,
-				    DB88F5281_7SEG_SIZE);
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
-				    ORION_MBUS_DEVBUS_ATTR(1),
-				    DB88F5281_NOR_BASE,
-				    DB88F5281_NOR_SIZE);
-	platform_device_register(&db88f5281_nor_flash);
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(2),
-				    ORION_MBUS_DEVBUS_ATTR(2),
-				    DB88F5281_NAND_BASE,
-				    DB88F5281_NAND_SIZE);
-	platform_device_register(&db88f5281_nand_flash);
-
-	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
-}
-
-MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
-	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= db88f5281_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 87cb47220e82..d69259b6b60d 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -696,12 +696,12 @@ static void __init dns323_init(void)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
 		pm_power_off = dns323c_power_off;
 
-		/* Now, -this- should theorically be done by the sata_mv driver
+		/* Now, -this- should theoretically be done by the sata_mv driver
 		 * once I figure out what's going on there. Maybe the behaviour
 		 * of the LEDs should be somewhat passed via the platform_data.
 		 * for now, just whack the register and make the LEDs happy
 		 *
-		 * Note: AFAIK, rev B1 needs the same treatement but I'll let
+		 * Note: AFAIK, rev B1 needs the same treatment but I'll let
 		 * somebody else test it.
 		 */
 		writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c);
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index ac4af2283bef..e17727e53cb4 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/irq.c
  *
  * Core IRQ functions for Marvell Orion System On Chip
  *
  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/gpio.h>
 #include <linux/kernel.h>
@@ -49,6 +46,6 @@ void __init orion5x_init_irq(void)
 	/*
 	 * Initialize gpiolib for GPIOs 0-31.
 	 */
-	orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE, 0,
+	orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0,
 			IRQ_ORION5X_GPIO_START, gpio0_irqs);
 }
diff --git a/arch/arm/mach-orion5x/irqs.h b/arch/arm/mach-orion5x/irqs.h
index 506c8e0b30c4..a70c47cfa6bc 100644
--- a/arch/arm/mach-orion5x/irqs.h
+++ b/arch/arm/mach-orion5x/irqs.h
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * IRQ definitions for Orion SoC
  *
  *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- *  This file is licensed under the terms of the GNU General Public
- *  License version 2. This program is licensed "as is" without any
- *  warranty of any kind, whether express or implied.
  */
 
 #ifndef __ASM_ARCH_IRQS_H
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 83d43cff4bd7..acba06618080 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/kurobox_pro-setup.c
  *
  * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 #include <linux/gpio.h>
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
deleted file mode 100644
index 47ba6e0502f5..000000000000
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * arch/arm/mach-orion5x/ls_hgl-setup.c
- *
- * Maintainer: Zhu Qingsen <zhuqs@cn.fujitsu.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * Linkstation LS-HGL Info
- ****************************************************************************/
-
-/*
- * 256K NOR flash Device bus boot chip select
- */
-
-#define LS_HGL_NOR_BOOT_BASE	0xf4000000
-#define LS_HGL_NOR_BOOT_SIZE	SZ_256K
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data ls_hgl_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource ls_hgl_nor_flash_resource = {
-	.flags	= IORESOURCE_MEM,
-	.start	= LS_HGL_NOR_BOOT_BASE,
-	.end	= LS_HGL_NOR_BOOT_BASE + LS_HGL_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device ls_hgl_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &ls_hgl_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &ls_hgl_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data ls_hgl_eth_data = {
-	.phy_addr	= 8,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-static struct i2c_board_info __initdata ls_hgl_i2c_rtc = {
-	I2C_BOARD_INFO("rs5c372a", 0x32),
-};
-
-/*****************************************************************************
- * LEDs attached to GPIO
- ****************************************************************************/
-
-#define LS_HGL_GPIO_LED_ALARM   2
-#define LS_HGL_GPIO_LED_INFO    3
-#define LS_HGL_GPIO_LED_FUNC    17
-#define LS_HGL_GPIO_LED_PWR     0
-
-
-static struct gpio_led ls_hgl_led_pins[] = {
-	{
-		.name	   = "alarm:red",
-		.gpio	   = LS_HGL_GPIO_LED_ALARM,
-		.active_low     = 1,
-	}, {
-		.name	   = "info:amber",
-		.gpio	   = LS_HGL_GPIO_LED_INFO,
-		.active_low     = 1,
-	}, {
-		.name	   = "func:blue:top",
-		.gpio	   = LS_HGL_GPIO_LED_FUNC,
-		.active_low     = 1,
-	}, {
-		.name	   = "power:blue:bottom",
-		.gpio	   = LS_HGL_GPIO_LED_PWR,
-	},
-};
-
-static struct gpio_led_platform_data ls_hgl_led_data = {
-	.leds	   = ls_hgl_led_pins,
-	.num_leds       = ARRAY_SIZE(ls_hgl_led_pins),
-};
-
-static struct platform_device ls_hgl_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &ls_hgl_led_data,
-	},
-};
-
-/****************************************************************************
- * GPIO Attached Keys
- ****************************************************************************/
-#define LS_HGL_GPIO_KEY_FUNC       15
-#define LS_HGL_GPIO_KEY_POWER      8
-#define LS_HGL_GPIO_KEY_AUTOPOWER  10
-
-#define LS_HGL_SW_POWER     0x00
-#define LS_HGL_SW_AUTOPOWER 0x01
-
-static struct gpio_keys_button ls_hgl_buttons[] = {
-	{
-		.code	   = KEY_OPTION,
-		.gpio	   = LS_HGL_GPIO_KEY_FUNC,
-		.desc	   = "Function Button",
-		.active_low     = 1,
-	}, {
-		.type		= EV_SW,
-		.code	   = LS_HGL_SW_POWER,
-		.gpio	   = LS_HGL_GPIO_KEY_POWER,
-		.desc	   = "Power-on Switch",
-		.active_low     = 1,
-	}, {
-		.type		= EV_SW,
-		.code	   = LS_HGL_SW_AUTOPOWER,
-		.gpio	   = LS_HGL_GPIO_KEY_AUTOPOWER,
-		.desc	   = "Power-auto Switch",
-		.active_low     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data ls_hgl_button_data = {
-	.buttons	= ls_hgl_buttons,
-	.nbuttons       = ARRAY_SIZE(ls_hgl_buttons),
-};
-
-static struct platform_device ls_hgl_button_device = {
-	.name	   = "gpio-keys",
-	.id	     = -1,
-	.num_resources  = 0,
-	.dev	    = {
-		.platform_data  = &ls_hgl_button_data,
-	},
-};
-
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data ls_hgl_sata_data = {
-	.n_ports	= 2,
-};
-
-
-/*****************************************************************************
- * Linkstation LS-HGL specific power off method: reboot
- ****************************************************************************/
-/*
- * On the Linkstation LS-HGL, the shutdown process is following:
- * - Userland monitors key events until the power switch goes to off position
- * - The board reboots
- * - U-boot starts and goes into an idle mode waiting for the user
- *   to move the switch to ON position
- */
-
-static void ls_hgl_power_off(void)
-{
-	orion5x_restart(REBOOT_HARD, NULL);
-}
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-#define LS_HGL_GPIO_USB_POWER	9
-#define LS_HGL_GPIO_AUTO_POWER	10
-#define LS_HGL_GPIO_POWER	    8
-
-#define LS_HGL_GPIO_HDD_POWER	1
-
-static unsigned int ls_hgl_mpp_modes[] __initdata = {
-	MPP0_GPIO, /* LED_PWR */
-	MPP1_GPIO, /* HDD_PWR */
-	MPP2_GPIO, /* LED_ALARM */
-	MPP3_GPIO, /* LED_INFO */
-	MPP4_UNUSED,
-	MPP5_UNUSED,
-	MPP6_GPIO, /* FAN_LCK */
-	MPP7_GPIO, /* INIT */
-	MPP8_GPIO, /* POWER */
-	MPP9_GPIO, /* USB_PWR */
-	MPP10_GPIO, /* AUTO_POWER */
-	MPP11_UNUSED, /* LED_ETH (dummy) */
-	MPP12_UNUSED,
-	MPP13_UNUSED,
-	MPP14_UNUSED,
-	MPP15_GPIO, /* FUNC */
-	MPP16_UNUSED,
-	MPP17_GPIO, /* LED_FUNC */
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init ls_hgl_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(ls_hgl_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&ls_hgl_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&ls_hgl_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    LS_HGL_NOR_BOOT_BASE,
-				    LS_HGL_NOR_BOOT_SIZE);
-	platform_device_register(&ls_hgl_nor_flash);
-
-	platform_device_register(&ls_hgl_button_device);
-
-	platform_device_register(&ls_hgl_leds);
-
-	i2c_register_board_info(0, &ls_hgl_i2c_rtc, 1);
-
-	/* enable USB power */
-	gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);
-
-	/* register power-off method */
-	pm_power_off = ls_hgl_power_off;
-
-	pr_info("%s: finished\n", __func__);
-}
-
-MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
-	/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= ls_hgl_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index 19ef18594415..b9855dce6ba0 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/mpp.c
  *
  * MPP functions for Marvell Orion 5x SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index bf6be4cfd238..695cc683cd83 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/net2big-setup.c
  *
  * LaCie 2Big Network NAS setup
  *
  * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
@@ -432,4 +429,3 @@ MACHINE_START(NET2BIG, "LaCie 2Big Network")
 	.fixup		= tag_fixup_mem32,
 	.restart	= orion5x_restart,
 MACHINE_END
-
diff --git a/arch/arm/mach-orion5x/orion5x.h b/arch/arm/mach-orion5x/orion5x.h
index 2b66120fba86..26f1ccb8cb28 100644
--- a/arch/arm/mach-orion5x/orion5x.h
+++ b/arch/arm/mach-orion5x/orion5x.h
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Generic definitions of Orion SoC flavors:
  *  Orion-1, Orion-VoIP, Orion-NAS, Orion-2, and Orion-1-90.
  *
  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #ifndef __ASM_ARCH_ORION5X_H
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 76951bfbacf5..3313bc5a63ea 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/pci.c
  *
  * PCI and PCIe functions for Marvell Orion System On Chip
  *
  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
@@ -142,6 +139,7 @@ static struct pci_ops pcie_ops = {
 static int __init pcie_setup(struct pci_sys_data *sys)
 {
 	struct resource *res;
+	struct resource realio;
 	int dev;
 
 	/*
@@ -164,7 +162,9 @@ static int __init pcie_setup(struct pci_sys_data *sys)
 		pcie_ops.read = pcie_rd_conf_wa;
 	}
 
-	pci_ioremap_io(sys->busnr * SZ_64K, ORION5X_PCIE_IO_PHYS_BASE);
+	realio.start = sys->busnr * SZ_64K;
+	realio.end = realio.start + SZ_64K - 1;
+	pci_remap_iospace(&realio, ORION5X_PCIE_IO_PHYS_BASE);
 
 	/*
 	 * Request resources.
@@ -466,6 +466,7 @@ static void __init orion5x_setup_pci_wins(void)
 static int __init pci_setup(struct pci_sys_data *sys)
 {
 	struct resource *res;
+	struct resource realio;
 
 	/*
 	 * Point PCI unit MBUS decode windows to DRAM space.
@@ -482,7 +483,9 @@ static int __init pci_setup(struct pci_sys_data *sys)
 	 */
 	orion5x_setbits(PCI_CMD, PCI_CMD_HOST_REORDER);
 
-	pci_ioremap_io(sys->busnr * SZ_64K, ORION5X_PCI_IO_PHYS_BASE);
+	realio.start = sys->busnr * SZ_64K;
+	realio.end = realio.start + SZ_64K - 1;
+	pci_remap_iospace(&realio, ORION5X_PCI_IO_PHYS_BASE);
 
 	/*
 	 * Request resources
@@ -509,18 +512,24 @@ static int __init pci_setup(struct pci_sys_data *sys)
 /*****************************************************************************
  * General PCIe + PCI
  ****************************************************************************/
+
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
 static void rc_pci_fixup(struct pci_dev *dev)
 {
-	/*
-	 * Prevent enumeration of root complex.
-	 */
 	if (dev->bus->parent == NULL && dev->devfn == 0) {
-		int i;
-
-		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-			dev->resource[i].start = 0;
-			dev->resource[i].end   = 0;
-			dev->resource[i].flags = 0;
+		struct resource *r;
+
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
+		pci_dev_for_each_resource(dev, r) {
+			r->start	= 0;
+			r->end		= 0;
+			r->flags	= 0;
 		}
 	}
 }
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
deleted file mode 100644
index c65ab7db36ad..000000000000
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
- *
- * Marvell Orion-VoIP FXO Reference Design Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/platform_data/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * RD-88F5181L FXO Info
- ****************************************************************************/
-/*
- * 8M NOR flash Device bus boot chip select
- */
-#define RD88F5181L_FXO_NOR_BOOT_BASE		0xff800000
-#define RD88F5181L_FXO_NOR_BOOT_SIZE		SZ_8M
-
-
-/*****************************************************************************
- * 8M NOR Flash on Device bus Boot chip select
- ****************************************************************************/
-static struct physmap_flash_data rd88f5181l_fxo_nor_boot_flash_data = {
-	.width		= 1,
-};
-
-static struct resource rd88f5181l_fxo_nor_boot_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= RD88F5181L_FXO_NOR_BOOT_BASE,
-	.end		= RD88F5181L_FXO_NOR_BOOT_BASE +
-			  RD88F5181L_FXO_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device rd88f5181l_fxo_nor_boot_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &rd88f5181l_fxo_nor_boot_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &rd88f5181l_fxo_nor_boot_flash_resource,
-};
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int rd88f5181l_fxo_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* LED1 CardBus LED (front panel) */
-	MPP1_GPIO,		/* PCI_intA */
-	MPP2_GPIO,		/* Hard Reset / Factory Init*/
-	MPP3_GPIO,		/* FXS or DAA select */
-	MPP4_GPIO,		/* LED6 - phone LED (front panel) */
-	MPP5_GPIO,		/* LED5 - phone LED (front panel) */
-	MPP6_PCI_CLK,		/* CPU PCI refclk */
-	MPP7_PCI_CLK,		/* PCI/PCIe refclk */
-	MPP8_GPIO,		/* CardBus reset */
-	MPP9_GPIO,		/* GE_RXERR */
-	MPP10_GPIO,		/* LED2 MiniPCI LED (front panel) */
-	MPP11_GPIO,		/* Lifeline control */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
-	.port_names[0]	= "lan2",
-	.port_names[1]	= "lan1",
-	.port_names[2]	= "wan",
-	.port_names[3]	= "cpu",
-	.port_names[5]	= "lan4",
-	.port_names[7]	= "lan3",
-};
-
-static void __init rd88f5181l_fxo_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_chip_data);
-	orion5x_uart0_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    RD88F5181L_FXO_NOR_BOOT_BASE,
-				    RD88F5181L_FXO_NOR_BOOT_SIZE);
-	platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
-}
-
-static int __init
-rd88f5181l_fxo_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Mini-PCI / Cardbus slot.
-	 */
-	return gpio_to_irq(1);
-}
-
-static struct hw_pci rd88f5181l_fxo_pci __initdata = {
-	.nr_controllers	= 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= rd88f5181l_fxo_pci_map_irq,
-};
-
-static int __init rd88f5181l_fxo_pci_init(void)
-{
-	if (machine_is_rd88f5181l_fxo()) {
-		orion5x_pci_set_cardbus_mode();
-		pci_common_init(&rd88f5181l_fxo_pci);
-	}
-
-	return 0;
-}
-subsys_initcall(rd88f5181l_fxo_pci_init);
-
-MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
-	/* Maintainer: Nicolas Pitre <nico@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= rd88f5181l_fxo_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
deleted file mode 100644
index 76b8138d9d79..000000000000
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
- *
- * Marvell Orion-VoIP GE Reference Design Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * RD-88F5181L GE Info
- ****************************************************************************/
-/*
- * 16M NOR flash Device bus boot chip select
- */
-#define RD88F5181L_GE_NOR_BOOT_BASE		0xff000000
-#define RD88F5181L_GE_NOR_BOOT_SIZE		SZ_16M
-
-
-/*****************************************************************************
- * 16M NOR Flash on Device bus Boot chip select
- ****************************************************************************/
-static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = {
-	.width		= 1,
-};
-
-static struct resource rd88f5181l_ge_nor_boot_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= RD88F5181L_GE_NOR_BOOT_BASE,
-	.end		= RD88F5181L_GE_NOR_BOOT_BASE +
-			  RD88F5181L_GE_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device rd88f5181l_ge_nor_boot_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &rd88f5181l_ge_nor_boot_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &rd88f5181l_ge_nor_boot_flash_resource,
-};
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int rd88f5181l_ge_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* LED1 */
-	MPP1_GPIO,		/* LED5 */
-	MPP2_GPIO,		/* LED4 */
-	MPP3_GPIO,		/* LED3 */
-	MPP4_GPIO,		/* PCI_intA */
-	MPP5_GPIO,		/* RTC interrupt */
-	MPP6_PCI_CLK,		/* CPU PCI refclk */
-	MPP7_PCI_CLK,		/* PCI/PCIe refclk */
-	MPP8_GPIO,		/* 88e6131 interrupt */
-	MPP9_GPIO,		/* GE_RXERR */
-	MPP10_GPIO,		/* PCI_intB */
-	MPP11_GPIO,		/* LED2 */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
-	.port_names[0]	= "lan2",
-	.port_names[1]	= "lan1",
-	.port_names[2]	= "wan",
-	.port_names[3]	= "cpu",
-	.port_names[5]	= "lan4",
-	.port_names[7]	= "lan3",
-};
-
-static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
-};
-
-static void __init rd88f5181l_ge_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&rd88f5181l_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_ge_switch_chip_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    RD88F5181L_GE_NOR_BOOT_BASE,
-				    RD88F5181L_GE_NOR_BOOT_SIZE);
-	platform_device_register(&rd88f5181l_ge_nor_boot_flash);
-
-	i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
-}
-
-static int __init
-rd88f5181l_ge_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Cardbus slot.
-	 */
-	if (pin == 1)
-		return gpio_to_irq(4);
-	else
-		return gpio_to_irq(10);
-}
-
-static struct hw_pci rd88f5181l_ge_pci __initdata = {
-	.nr_controllers	= 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= rd88f5181l_ge_pci_map_irq,
-};
-
-static int __init rd88f5181l_ge_pci_init(void)
-{
-	if (machine_is_rd88f5181l_ge()) {
-		orion5x_pci_set_cardbus_mode();
-		pci_common_init(&rd88f5181l_ge_pci);
-	}
-
-	return 0;
-}
-subsys_initcall(rd88f5181l_ge_pci_init);
-
-MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= rd88f5181l_ge_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
deleted file mode 100644
index fe3e67c81fb8..000000000000
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * arch/arm/mach-orion5x/rd88f5182-setup.c
- *
- * Marvell Orion-NAS Reference Design Setup
- *
- * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * RD-88F5182 Info
- ****************************************************************************/
-
-/*
- * 512K NOR flash Device bus boot chip select
- */
-
-#define RD88F5182_NOR_BOOT_BASE		0xf4000000
-#define RD88F5182_NOR_BOOT_SIZE		SZ_512K
-
-/*
- * 16M NOR flash on Device bus chip select 1
- */
-
-#define RD88F5182_NOR_BASE		0xfc000000
-#define RD88F5182_NOR_SIZE		SZ_16M
-
-/*
- * PCI
- */
-
-#define RD88F5182_PCI_SLOT0_OFFS	7
-#define RD88F5182_PCI_SLOT0_IRQ_A_PIN	7
-#define RD88F5182_PCI_SLOT0_IRQ_B_PIN	6
-
-/*****************************************************************************
- * 16M NOR Flash on Device bus CS1
- ****************************************************************************/
-
-static struct physmap_flash_data rd88f5182_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource rd88f5182_nor_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-	.start			= RD88F5182_NOR_BASE,
-	.end			= RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1,
-};
-
-static struct platform_device rd88f5182_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &rd88f5182_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &rd88f5182_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Use GPIO LED as CPU active indication
- ****************************************************************************/
-
-#define RD88F5182_GPIO_LED		0
-
-static struct gpio_led rd88f5182_gpio_led_pins[] = {
-	{
-		.name		= "rd88f5182:cpu",
-		.default_trigger = "cpu0",
-		.gpio		= RD88F5182_GPIO_LED,
-	},
-};
-
-static struct gpio_led_platform_data rd88f5182_gpio_led_data = {
-	.leds		= rd88f5182_gpio_led_pins,
-	.num_leds	= ARRAY_SIZE(rd88f5182_gpio_led_pins),
-};
-
-static struct platform_device rd88f5182_gpio_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &rd88f5182_gpio_led_data,
-	},
-};
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-
-static void __init rd88f5182_pci_preinit(void)
-{
-	int pin;
-
-	/*
-	 * Configure PCI GPIO IRQ pins
-	 */
-	pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
-	if (gpio_request(pin, "PCI IntA") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "rd88f5182_pci_preinit failed to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
-	}
-
-	pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
-	if (gpio_request(pin, "PCI IntB") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "rd88f5182_pci_preinit failed to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
-	}
-}
-
-static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * PCI IRQs are connected via GPIOs
-	 */
-	switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
-	case 0:
-		if (pin == 1)
-			return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
-		else
-			return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
-	default:
-		return -1;
-	}
-}
-
-static struct hw_pci rd88f5182_pci __initdata = {
-	.nr_controllers	= 2,
-	.preinit	= rd88f5182_pci_preinit,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= rd88f5182_pci_map_irq,
-};
-
-static int __init rd88f5182_pci_init(void)
-{
-	if (machine_is_rd88f5182())
-		pci_common_init(&rd88f5182_pci);
-
-	return 0;
-}
-
-subsys_initcall(rd88f5182_pci_init);
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * RTC DS1338 on I2C bus
- ****************************************************************************/
-static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
-};
-
-/*****************************************************************************
- * Sata
- ****************************************************************************/
-static struct mv_sata_platform_data rd88f5182_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int rd88f5182_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Debug Led */
-	MPP1_GPIO,		/* Reset Switch */
-	MPP2_UNUSED,
-	MPP3_GPIO,		/* RTC Int */
-	MPP4_GPIO,
-	MPP5_GPIO,
-	MPP6_GPIO,		/* PCI_intA */
-	MPP7_GPIO,		/* PCI_intB */
-	MPP8_UNUSED,
-	MPP9_UNUSED,
-	MPP10_UNUSED,
-	MPP11_UNUSED,
-	MPP12_SATA_LED,		/* SATA 0 presence */
-	MPP13_SATA_LED,		/* SATA 1 presence */
-	MPP14_SATA_LED,		/* SATA 0 active */
-	MPP15_SATA_LED,		/* SATA 1 active */
-	MPP16_UNUSED,
-	MPP17_UNUSED,
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init rd88f5182_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(rd88f5182_mpp_modes);
-
-	/*
-	 * MPP[20] PCI Clock to MV88F5182
-	 * MPP[21] PCI Clock to mini PCI CON11
-	 * MPP[22] USB 0 over current indication
-	 * MPP[23] USB 1 over current indication
-	 * MPP[24] USB 1 over current enable
-	 * MPP[25] USB 0 over current enable
-	 */
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&rd88f5182_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&rd88f5182_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    RD88F5182_NOR_BOOT_BASE,
-				    RD88F5182_NOR_BOOT_SIZE);
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
-				    ORION_MBUS_DEVBUS_ATTR(1),
-				    RD88F5182_NOR_BASE,
-				    RD88F5182_NOR_SIZE);
-	platform_device_register(&rd88f5182_nor_flash);
-	platform_device_register(&rd88f5182_gpio_leds);
-
-	i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
-}
-
-MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
-	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= rd88f5182_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
deleted file mode 100644
index 5f388a1ed1e4..000000000000
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/arm/mach-orion5x/rd88f6183-ap-ge-setup.c
- *
- * Marvell Orion-1-90 AP GE Reference Design Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/ethtool.h>
-#include <linux/platform_data/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "common.h"
-#include "orion5x.h"
-
-static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
-	.phy_addr	= -1,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
-	.port_names[0]	= "lan1",
-	.port_names[1]	= "lan2",
-	.port_names[2]	= "lan3",
-	.port_names[3]	= "lan4",
-	.port_names[4]	= "wan",
-	.port_names[5]	= "cpu",
-};
-
-static struct mtd_partition rd88f6183ap_ge_partitions[] = {
-	{
-		.name	= "kernel",
-		.offset	= 0x00000000,
-		.size	= 0x00200000,
-	}, {
-		.name	= "rootfs",
-		.offset	= 0x00200000,
-		.size	= 0x00500000,
-	}, {
-		.name	= "nvram",
-		.offset	= 0x00700000,
-		.size	= 0x00080000,
-	},
-};
-
-static struct flash_platform_data rd88f6183ap_ge_spi_slave_data = {
-	.type		= "m25p64",
-	.nr_parts	= ARRAY_SIZE(rd88f6183ap_ge_partitions),
-	.parts		= rd88f6183ap_ge_partitions,
-};
-
-static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &rd88f6183ap_ge_spi_slave_data,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
-
-static void __init rd88f6183ap_ge_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_chip_data);
-	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
-				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
-	orion5x_spi_init();
-	orion5x_uart0_init();
-}
-
-static struct hw_pci rd88f6183ap_ge_pci __initdata = {
-	.nr_controllers	= 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= orion5x_pci_map_irq,
-};
-
-static int __init rd88f6183ap_ge_pci_init(void)
-{
-	if (machine_is_rd88f6183ap_ge()) {
-		orion5x_pci_disable();
-		pci_common_init(&rd88f6183ap_ge_pci);
-	}
-
-	return 0;
-}
-subsys_initcall(rd88f6183ap_ge_pci_init);
-
-MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= rd88f6183ap_ge_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index a39764faf2a0..af810e7ccd79 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * arch/arm/mach-orion5x/ts78xx-setup.c
  *
  * Maintainer: Alexander Clouter <alex@digriz.org.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
deleted file mode 100644
index 83589a28a491..000000000000
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/arm/mach-orion5x/wnr854t-setup.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/platform_data/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "orion5x.h"
-#include "common.h"
-#include "mpp.h"
-
-static unsigned int wnr854t_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Power LED green (0=on) */
-	MPP1_GPIO,		/* Reset Button (0=off) */
-	MPP2_GPIO,		/* Power LED blink (0=off) */
-	MPP3_GPIO,		/* WAN Status LED amber (0=off) */
-	MPP4_GPIO,		/* PCI int */
-	MPP5_GPIO,		/* ??? */
-	MPP6_GPIO,		/* ??? */
-	MPP7_GPIO,		/* ??? */
-	MPP8_UNUSED,		/* ??? */
-	MPP9_GIGE,		/* GE_RXERR */
-	MPP10_UNUSED,		/* ??? */
-	MPP11_UNUSED,		/* ??? */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-/*
- * 8M NOR flash Device bus boot chip select
- */
-#define WNR854T_NOR_BOOT_BASE	0xf4000000
-#define WNR854T_NOR_BOOT_SIZE	SZ_8M
-
-static struct mtd_partition wnr854t_nor_flash_partitions[] = {
-	{
-		.name		= "kernel",
-		.offset		= 0x00000000,
-		.size		= 0x00100000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x00100000,
-		.size		= 0x00660000,
-	}, {
-		.name		= "uboot",
-		.offset		= 0x00760000,
-		.size		= 0x00040000,
-	},
-};
-
-static struct physmap_flash_data wnr854t_nor_flash_data = {
-	.width		= 2,
-	.parts		= wnr854t_nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(wnr854t_nor_flash_partitions),
-};
-
-static struct resource wnr854t_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= WNR854T_NOR_BOOT_BASE,
-	.end		= WNR854T_NOR_BOOT_BASE + WNR854T_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device wnr854t_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &wnr854t_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &wnr854t_nor_flash_resource,
-};
-
-static struct mv643xx_eth_platform_data wnr854t_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data wnr854t_switch_chip_data = {
-	.port_names[0] = "lan3",
-	.port_names[1] = "lan4",
-	.port_names[2] = "wan",
-	.port_names[3] = "cpu",
-	.port_names[5] = "lan1",
-	.port_names[7] = "lan2",
-};
-
-static void __init wnr854t_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(wnr854t_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_eth_init(&wnr854t_eth_data);
-	orion5x_eth_switch_init(&wnr854t_switch_chip_data);
-	orion5x_uart0_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    WNR854T_NOR_BOOT_BASE,
-				    WNR854T_NOR_BOOT_SIZE);
-	platform_device_register(&wnr854t_nor_flash);
-}
-
-static int __init wnr854t_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Mini-PCI slot.
-	 */
-	if (slot == 7)
-		return gpio_to_irq(4);
-
-	return -1;
-}
-
-static struct hw_pci wnr854t_pci __initdata = {
-	.nr_controllers	= 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= wnr854t_pci_map_irq,
-};
-
-static int __init wnr854t_pci_init(void)
-{
-	if (machine_is_wnr854t())
-		pci_common_init(&wnr854t_pci);
-
-	return 0;
-}
-subsys_initcall(wnr854t_pci_init);
-
-MACHINE_START(WNR854T, "Netgear WNR854T")
-	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= wnr854t_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
deleted file mode 100644
index cea08d4a2597..000000000000
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * arch/arm/mach-orion5x/wrt350n-v2-setup.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/platform_data/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "orion5x.h"
-#include "common.h"
-#include "mpp.h"
-
-/*
- * LEDs attached to GPIO
- */
-static struct gpio_led wrt350n_v2_led_pins[] = {
-	{
-		.name		= "wrt350nv2:green:power",
-		.gpio		= 0,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt350nv2:green:security",
-		.gpio		= 1,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt350nv2:orange:power",
-		.gpio		= 5,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt350nv2:green:usb",
-		.gpio		= 6,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt350nv2:green:wireless",
-		.gpio		= 7,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_led_platform_data wrt350n_v2_led_data = {
-	.leds		= wrt350n_v2_led_pins,
-	.num_leds	= ARRAY_SIZE(wrt350n_v2_led_pins),
-};
-
-static struct platform_device wrt350n_v2_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &wrt350n_v2_led_data,
-	},
-};
-
-/*
- * Buttons attached to GPIO
- */
-static struct gpio_keys_button wrt350n_v2_buttons[] = {
-	{
-		.code		= KEY_RESTART,
-		.gpio		= 3,
-		.desc		= "Reset Button",
-		.active_low	= 1,
-	}, {
-		.code		= KEY_WPS_BUTTON,
-		.gpio		= 2,
-		.desc		= "WPS Button",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data wrt350n_v2_button_data = {
-	.buttons	= wrt350n_v2_buttons,
-	.nbuttons	= ARRAY_SIZE(wrt350n_v2_buttons),
-};
-
-static struct platform_device wrt350n_v2_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &wrt350n_v2_button_data,
-	},
-};
-
-/*
- * General setup
- */
-static unsigned int wrt350n_v2_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Power LED green (0=on) */
-	MPP1_GPIO,		/* Security LED (0=on) */
-	MPP2_GPIO,		/* Internal Button (0=on) */
-	MPP3_GPIO,		/* Reset Button (0=on) */
-	MPP4_GPIO,		/* PCI int */
-	MPP5_GPIO,		/* Power LED orange (0=on) */
-	MPP6_GPIO,		/* USB LED (0=on) */
-	MPP7_GPIO,		/* Wireless LED (0=on) */
-	MPP8_UNUSED,		/* ??? */
-	MPP9_GIGE,		/* GE_RXERR */
-	MPP10_UNUSED,		/* ??? */
-	MPP11_UNUSED,		/* ??? */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-/*
- * 8M NOR flash Device bus boot chip select
- */
-#define WRT350N_V2_NOR_BOOT_BASE	0xf4000000
-#define WRT350N_V2_NOR_BOOT_SIZE	SZ_8M
-
-static struct mtd_partition wrt350n_v2_nor_flash_partitions[] = {
-	{
-		.name		= "kernel",
-		.offset		= 0x00000000,
-		.size		= 0x00760000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x001a0000,
-		.size		= 0x005c0000,
-	}, {
-		.name		= "lang",
-		.offset		= 0x00760000,
-		.size		= 0x00040000,
-	}, {
-		.name		= "nvram",
-		.offset		= 0x007a0000,
-		.size		= 0x00020000,
-	}, {
-		.name		= "u-boot",
-		.offset		= 0x007c0000,
-		.size		= 0x00040000,
-	},
-};
-
-static struct physmap_flash_data wrt350n_v2_nor_flash_data = {
-	.width		= 1,
-	.parts		= wrt350n_v2_nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(wrt350n_v2_nor_flash_partitions),
-};
-
-static struct resource wrt350n_v2_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= WRT350N_V2_NOR_BOOT_BASE,
-	.end		= WRT350N_V2_NOR_BOOT_BASE + WRT350N_V2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device wrt350n_v2_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &wrt350n_v2_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &wrt350n_v2_nor_flash_resource,
-};
-
-static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
-	.port_names[0]	= "lan2",
-	.port_names[1]	= "lan1",
-	.port_names[2]	= "wan",
-	.port_names[3]	= "cpu",
-	.port_names[5]	= "lan3",
-	.port_names[7]	= "lan4",
-};
-
-static void __init wrt350n_v2_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(wrt350n_v2_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&wrt350n_v2_eth_data);
-	orion5x_eth_switch_init(&wrt350n_v2_switch_chip_data);
-	orion5x_uart0_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    WRT350N_V2_NOR_BOOT_BASE,
-				    WRT350N_V2_NOR_BOOT_SIZE);
-	platform_device_register(&wrt350n_v2_nor_flash);
-	platform_device_register(&wrt350n_v2_leds);
-	platform_device_register(&wrt350n_v2_button_device);
-}
-
-static int __init wrt350n_v2_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Mini-PCI slot.
-	 */
-	if (slot == 7)
-		return gpio_to_irq(4);
-
-	return -1;
-}
-
-static struct hw_pci wrt350n_v2_pci __initdata = {
-	.nr_controllers	= 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= wrt350n_v2_pci_map_irq,
-};
-
-static int __init wrt350n_v2_pci_init(void)
-{
-	if (machine_is_wrt350n_v2())
-		pci_common_init(&wrt350n_v2_pci);
-
-	return 0;
-}
-subsys_initcall(wrt350n_v2_pci_init);
-
-MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= wrt350n_v2_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-oxnas/Kconfig b/arch/arm/mach-oxnas/Kconfig
deleted file mode 100644
index bee5f64c2e5f..000000000000
--- a/arch/arm/mach-oxnas/Kconfig
+++ /dev/null
@@ -1,38 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_OXNAS
-	bool "Oxford Semiconductor OXNAS Family SoCs"
-	select ARCH_HAS_RESET_CONTROLLER
-	select COMMON_CLK_OXNAS
-	select GPIOLIB
-	select MFD_SYSCON
-	select OXNAS_RPS_TIMER
-	select PINCTRL_OXNAS
-	select RESET_CONTROLLER
-	select RESET_OXNAS
-	select VERSATILE_FPGA_IRQ
-	select PINCTRL
-	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6
-	help
-	  Support for OxNas SoC family developed by Oxford Semiconductor.
-
-if ARCH_OXNAS
-
-config MACH_OX810SE
-	bool "Support OX810SE Based Products"
-	depends on ARCH_MULTI_V5
-	select CPU_ARM926T
-	help
-	  Include Support for the Oxford Semiconductor OX810SE SoC Based Products.
-
-config MACH_OX820
-	bool "Support OX820 Based Products"
-	depends on ARCH_MULTI_V6
-	select ARM_GIC
-	select DMA_CACHE_RWFO if SMP
-	select HAVE_SMP
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	help
-	  Include Support for the Oxford Semiconductor OX820 SoC Based Products.
-
-endif
diff --git a/arch/arm/mach-oxnas/Makefile b/arch/arm/mach-oxnas/Makefile
deleted file mode 100644
index 0e78ecfe6c49..000000000000
--- a/arch/arm/mach-oxnas/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-oxnas/headsmp.S b/arch/arm/mach-oxnas/headsmp.S
deleted file mode 100644
index 9c0f1479f33a..000000000000
--- a/arch/arm/mach-oxnas/headsmp.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
- * Copyright (c) 2003 ARM Limited
- * All Rights Reserved
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-	__INIT
-
-/*
- * OX820 specific entry point for secondary CPUs.
- */
-ENTRY(ox820_secondary_startup)
-	mov r4, #0
-	/* invalidate both caches and branch target cache */
-	mcr p15, 0, r4, c7, c7, 0
-	/*
-	 * we've been released from the holding pen: secondary_stack
-	 * should now contain the SVC stack for this core
-	 */
-	b	secondary_startup
diff --git a/arch/arm/mach-oxnas/platsmp.c b/arch/arm/mach-oxnas/platsmp.c
deleted file mode 100644
index f0a50b9e61df..000000000000
--- a/arch/arm/mach-oxnas/platsmp.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- */
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <asm/smp_plat.h>
-#include <asm/smp_scu.h>
-
-extern void ox820_secondary_startup(void);
-
-static void __iomem *cpu_ctrl;
-static void __iomem *gic_cpu_ctrl;
-
-#define HOLDINGPEN_CPU_OFFSET		0xc8
-#define HOLDINGPEN_LOCATION_OFFSET	0xc4
-
-#define GIC_NCPU_OFFSET(cpu)		(0x100 + (cpu)*0x100)
-#define GIC_CPU_CTRL			0x00
-#define GIC_CPU_CTRL_ENABLE		1
-
-static int __init ox820_boot_secondary(unsigned int cpu,
-		struct task_struct *idle)
-{
-	/*
-	 * Write the address of secondary startup into the
-	 * system-wide flags register. The BootMonitor waits
-	 * until it receives a soft interrupt, and then the
-	 * secondary CPU branches to this address.
-	 */
-	writel(virt_to_phys(ox820_secondary_startup),
-			cpu_ctrl + HOLDINGPEN_LOCATION_OFFSET);
-
-	writel(cpu, cpu_ctrl + HOLDINGPEN_CPU_OFFSET);
-
-	/*
-	 * Enable GIC cpu interface in CPU Interface Control Register
-	 */
-	writel(GIC_CPU_CTRL_ENABLE,
-		gic_cpu_ctrl + GIC_NCPU_OFFSET(cpu) + GIC_CPU_CTRL);
-
-	/*
-	 * Send the secondary CPU a soft interrupt, thereby causing
-	 * the boot monitor to read the system wide flags register,
-	 * and branch to the address found there.
-	 */
-	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-
-	return 0;
-}
-
-static void __init ox820_smp_prepare_cpus(unsigned int max_cpus)
-{
-	struct device_node *np;
-	void __iomem *scu_base;
-
-	np = of_find_compatible_node(NULL, NULL, "arm,arm11mp-scu");
-	scu_base = of_iomap(np, 0);
-	of_node_put(np);
-	if (!scu_base)
-		return;
-
-	/* Remap CPU Interrupt Interface Registers */
-	np = of_find_compatible_node(NULL, NULL, "arm,arm11mp-gic");
-	gic_cpu_ctrl = of_iomap(np, 1);
-	of_node_put(np);
-	if (!gic_cpu_ctrl)
-		goto unmap_scu;
-
-	np = of_find_compatible_node(NULL, NULL, "oxsemi,ox820-sys-ctrl");
-	cpu_ctrl = of_iomap(np, 0);
-	of_node_put(np);
-	if (!cpu_ctrl)
-		goto unmap_scu;
-
-	scu_enable(scu_base);
-	flush_cache_all();
-
-unmap_scu:
-	iounmap(scu_base);
-}
-
-static const struct smp_operations ox820_smp_ops __initconst = {
-	.smp_prepare_cpus	= ox820_smp_prepare_cpus,
-	.smp_boot_secondary	= ox820_boot_secondary,
-};
-
-CPU_METHOD_OF_DECLARE(ox820_smp, "oxsemi,ox820-smp", &ox820_smp_ops);
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index f7520a6cc7d4..10e472f4fa43 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -1,9 +1,20 @@
 # SPDX-License-Identifier: GPL-2.0-only
-if ARCH_PXA
-
-menu "Intel PXA2xx/PXA3xx Implementations"
+menuconfig ARCH_PXA
+	bool "PXA2xx/PXA3xx-based"
+	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	select ARM_CPU_SUSPEND if PM
+	select CLKSRC_PXA
+	select CLKSRC_MMIO
+	select TIMER_OF
+	select CPU_XSCALE if !CPU_XSC3
+	select GPIO_PXA
+	select GPIOLIB
+	select PLAT_PXA
+	help
+	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
-comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
+if ARCH_PXA
 
 config MACH_PXA25X_DT
 	bool "Support PXA25x platforms from device tree"
@@ -30,6 +41,8 @@ config MACH_PXA27X_DT
 config MACH_PXA3XX_DT
 	bool "Support PXA3xx platforms from device tree"
 	select CPU_PXA300
+	select CPU_PXA310
+	select CPU_PXA320
 	select PINCTRL
 	select POWER_SUPPLY
 	select PXA3xx
@@ -39,100 +52,9 @@ config MACH_PXA3XX_DT
 	  the device tree. Needn't select any other machine while
 	  MACH_PXA3XX_DT is enabled.
 
-config ARCH_LUBBOCK
-	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
-	select GPIO_REG
-	select PXA25x
-	select SA1111
-
-config MACH_MAINSTONE
-	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
-	select GPIO_REG
-	select PXA27x
+if ATAGS
 
-config MACH_ZYLONITE
-	bool
-	select PXA3xx
-
-config MACH_ZYLONITE300
-	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
-	select CPU_PXA300
-	select CPU_PXA310
-	select MACH_ZYLONITE
-
-config MACH_ZYLONITE320
-	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
-	select CPU_PXA320
-	select MACH_ZYLONITE
-
-config MACH_LITTLETON
-	bool "PXA3xx Form Factor Platform (aka Littleton)"
-	select CPU_PXA300
-	select CPU_PXA310
-	select PXA3xx
-
-config MACH_TAVOREVB
-	bool "PXA930 Evaluation Board (aka TavorEVB)"
-	select CPU_PXA930
-	select CPU_PXA935
-	select PXA3xx
-	select FB
-	select FB_PXA
-
-config MACH_SAAR
-	bool "PXA930 Handheld Platform (aka SAAR)"
-	select CPU_PXA930
-	select CPU_PXA935
-	select PXA3xx
-	select FB
-	select FB_PXA
-
-comment "Third Party Dev Platforms (sorted by vendor name)"
-
-config ARCH_PXA_IDP
-	bool "Accelent Xscale IDP"
-	select PXA25x
-
-config ARCH_VIPER
-	bool "Arcom/Eurotech VIPER SBC"
-	select ARCOM_PCMCIA
-	select I2C_GPIO if I2C=y
-	select ISA
-	select PXA25x
-
-config MACH_ARCOM_ZEUS
-	bool "Arcom/Eurotech ZEUS SBC"
-	select ARCOM_PCMCIA
-	select ISA
-	select PXA27x
-
-config MACH_BALLOON3
-	bool "Balloon 3 board"
-	select IWMMXT
-	select PXA27x
-
-config MACH_CSB726
-	bool "Enable Cogent CSB726 System On a Module"
-	select IWMMXT
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a Cogent
-	  CSB726 System On Module.
-
-config CSB726_CSB701
-	bool "Enable support for CSB701 baseboard"
-	depends on MACH_CSB726
-
-config MACH_CM_X300
-	bool "CompuLab CM-X300 modules"
-	select CPU_PXA300
-	select CPU_PXA310
-	select PXA3xx
-
-config MACH_CAPC7117
-	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
-	select CPU_PXA320
-	select PXA3xx
+comment "Legacy board files"
 
 config ARCH_GUMSTIX
 	bool "Gumstix XScale 255 boards"
@@ -153,291 +75,6 @@ config GUMSTIX_AM300EPD
 
 endchoice
 
-config MACH_INTELMOTE2
-	bool "Intel Mote 2 Platform"
-	select IWMMXT
-	select PXA27x
-
-config MACH_STARGATE2
-	bool "Intel Stargate 2 Platform"
-	select IWMMXT
-	select PXA27x
-
-config MACH_XCEP
-	bool "Iskratel Electronics XCEP"
-	select MTD
-	select MTD_CFI
-	select MTD_CFI_INTELEXT
-	select MTD_PHYSMAP
-	select PXA25x
-	help
-	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
-	  Tuned for usage in Libera instruments for particle accelerators.
-
-config TRIZEPS_PXA
-	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
-
-config MACH_TRIZEPS4
-	bool "Keith und Koep Trizeps4 DIMM-Module"
-	depends on TRIZEPS_PXA
-	select PXA27x
-	select TRIZEPS_PCMCIA
-
-config MACH_TRIZEPS4WL
-	bool "Keith und Koep Trizeps4-WL DIMM-Module"
-	depends on TRIZEPS_PXA
-	select MACH_TRIZEPS4
-	select PXA27x
-	select TRIZEPS_PCMCIA
-
-choice
-	prompt "Select base board for Trizeps module"
-	depends on TRIZEPS_PXA
-
-config MACH_TRIZEPS_CONXS
-	bool "ConXS Eval Board"
-
-config MACH_TRIZEPS_UCONXS
-	bool "uConXS Eval Board"
-
-config MACH_TRIZEPS_ANY
-	bool "another Board"
-
-endchoice
-
-config ARCOM_PCMCIA
-	bool
-	help
-	  Generic option for Arcom Viper/Zeus PCMCIA
-
-config TRIZEPS_PCMCIA
-	bool
-	help
-	  Enable PCMCIA support for Trizeps modules
-
-config MACH_LOGICPD_PXA270
-	bool "LogicPD PXA270 Card Engine Development Platform"
-	select PXA27x
-
-config MACH_PCM027
-	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
-	select IWMMXT
-	select PXA27x
-
-config MACH_PCM990_BASEBOARD
-	bool "PHYTEC PCM-990 development board"
-	depends on MACH_PCM027
-
-choice
-	prompt "display on pcm990"
-	depends on MACH_PCM990_BASEBOARD
-
-config PCM990_DISPLAY_SHARP
-	bool "sharp lq084v1dg21 stn display"
-
-config PCM990_DISPLAY_NEC
-	bool "nec nl6448bc20_18d tft display"
-
-config PCM990_DISPLAY_NONE
-	bool "no display"
-
-endchoice
-
-config MACH_COLIBRI
-	bool "Toradex Colibri PXA270"
-	select PXA27x
-
-config MACH_COLIBRI_PXA270_INCOME
-	bool "Income s.r.o. PXA270 SBC"
-	depends on MACH_COLIBRI
-	select PXA27x
-
-config MACH_COLIBRI300
-	bool "Toradex Colibri PXA300/310"
-	select CPU_PXA300
-	select CPU_PXA310
-	select PXA3xx
-
-config MACH_COLIBRI320
-	bool "Toradex Colibri PXA320"
-	select CPU_PXA320
-	select PXA3xx
-
-config MACH_COLIBRI_EVALBOARD
-	bool "Toradex Colibri Evaluation Carrier Board support"
-	depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
-
-config MACH_VPAC270
-	bool "Voipac PXA270"
-	select HAVE_PATA_PLATFORM
-	select PXA27x
-	help
-	  PXA270 based Single Board Computer.
-
-comment "End-user Products (sorted by vendor name)"
-
-config MACH_H4700
-	bool "HP iPAQ hx4700"
-	select IWMMXT
-	select PXA27x
-
-config MACH_H5000
-	bool "HP iPAQ h5000"
-	select PXA25x
-
-config MACH_HIMALAYA
-	bool "HTC Himalaya Support"
-	select CPU_PXA26x
-
-config MACH_MAGICIAN
-	bool "Enable HTC Magician Support"
-	select IWMMXT
-	select PXA27x
-
-config MACH_MIOA701
-	bool "Mitac Mio A701 Support"
-	select IWMMXT
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a
-	  MIO A701. Currently there is only basic support
-	  for this PDA.
-
-config PXA_EZX
-	bool "Motorola EZX Platform"
-	select IWMMXT
-	select PXA27x
-
-config MACH_EZX_A780
-	bool "Motorola EZX A780"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E680
-	bool "Motorola EZX E680"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_A1200
-	bool "Motorola EZX A1200"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_A910
-	bool "Motorola EZX A910"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E6
-	bool "Motorola EZX E6"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E2
-	bool "Motorola EZX E2"
-	default y
-	depends on PXA_EZX
-
-config MACH_MP900C
-	bool "Nec Mobilepro 900/c"
-	select PXA25x
-
-config ARCH_PXA_PALM
-	bool "PXA based Palm PDAs"
-
-config MACH_PALM27X
-	bool
-
-config MACH_PALMTE2
-	bool "Palm Tungsten|E2"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
-	  handheld computer.
-
-config MACH_PALMTC
-	bool "Palm Tungsten|C"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
-	  handheld computer.
-
-config MACH_PALMT5
-	bool "Palm Tungsten|T5"
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
-	  handheld computer.
-
-config MACH_PALMTX
-	bool "Palm T|X"
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a Palm T|X
-	  handheld computer.
-
-config MACH_PALMZ72
-	bool "Palm Zire 72"
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on Palm Zire 72
-	  handheld computer.
-
-config MACH_PALMLD
-	bool "Palm LifeDrive"
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a Palm LifeDrive
-	  handheld computer.
-
-config PALM_TREO
-	bool
-	depends on ARCH_PXA_PALM
-
-config MACH_CENTRO
-	bool "Palm Centro 685 (GSM)"
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PALM_TREO
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
-	  smartphone.
-
-config MACH_TREO680
-	bool "Palm Treo 680"
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PALM_TREO
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on Palm Treo 680
-	  smartphone.
-
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 	select SHARP_PARAM
@@ -457,30 +94,6 @@ config PXA_SHARPSL_DETECT_MACH_ID
 	  the Zaurus machine ID at run-time. For latest kexec-based
 	  boot loader, this is not necessary.
 
-config MACH_POODLE
-	bool "Enable Sharp SL-5600 (Poodle) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select SHARP_LOCOMO
-
-config MACH_CORGI
-	bool "Enable Sharp SL-C700 (Corgi) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-	bool "Enable Sharp SL-C750 (Shepherd) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-	bool "Enable Sharp SL-C760 (Husky) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
 config MACH_AKITA
 	bool "Enable Sharp SL-1000 (Akita) Support"
 	depends on PXA_SHARPSL
@@ -502,92 +115,7 @@ config MACH_BORZOI
 	select PXA27x
 	select PXA_SHARP_Cxx00
 
-config MACH_TOSA
-	bool "Enable Sharp SL-6000x (Tosa) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-
-config TOSA_BT
-	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
-	depends on MACH_TOSA && NET
-	select RFKILL
-	help
-	  This is a simple driver that is able to control
-	  the state of built in bluetooth chip on tosa.
-
-config TOSA_USE_EXT_KEYCODES
-	bool "Tosa keyboard: use extended keycodes"
-	depends on MACH_TOSA
-	help
-	  Say Y here to enable the tosa keyboard driver to generate extended
-	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
-	  by either console keyboard driver or by Kdrive keybd driver.
-
-	  Say Y only if you know, what you are doing!
-
-config MACH_ICONTROL
-	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
-	select CPU_PXA320
-	select PXA3xx
-
-config ARCH_PXA_ESERIES
-	bool "PXA based Toshiba e-series PDAs"
-	select FB_W100
-	select FB
-	select PXA25x
-
-config MACH_E330
-	bool "Toshiba e330"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e330 family PDA.
-
-config MACH_E350
-	bool "Toshiba e350"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e350 family PDA.
-
-config MACH_E740
-	bool "Toshiba e740"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e740 family PDA.
-
-config MACH_E750
-	bool "Toshiba e750"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e750 family PDA.
-
-config MACH_E400
-	bool "Toshiba e400"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e400 family PDA.
-
-config MACH_E800
-	bool "Toshiba e800"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e800 family PDA.
-
-config MACH_ZIPIT2
-	bool "Zipit Z2 Handheld"
-	select PXA27x
-endmenu
+endif # ATAGS
 
 config PXA25x
 	bool
@@ -601,12 +129,6 @@ config PXA27x
 	help
 	  Select code specific to PXA27x variants
 
-config CPU_PXA26x
-	bool
-	select PXA25x
-	help
-	  Select code specific to PXA26x (codename Dalhart)
-
 config PXA3xx
 	bool
 	select CPU_XSC3
@@ -622,7 +144,6 @@ config CPU_PXA300
 config CPU_PXA310
 	bool
 	select CPU_PXA300
-	select PXA310_ULPI if USB_ULPI
 	help
 	  PXA310 (codename Monahans-LV)
 
@@ -632,24 +153,6 @@ config CPU_PXA320
 	help
 	  PXA320 (codename Monahans-P)
 
-config CPU_PXA930
-	bool
-	select PXA3xx
-	help
-	  PXA930 (codename Tavor-P)
-
-config CPU_PXA935
-	bool
-	select CPU_PXA930
-	help
-	  PXA935 (codename Tavor-P65)
-
-config PXA_SHARP_C7xx
-	bool
-	select SHARPSL_PM
-	help
-	  Enable support for all Sharp C7xx models
-
 config PXA_SHARP_Cxx00
 	bool
 	select SHARPSL_PM
@@ -668,16 +171,4 @@ config SHARPSL_PM_MAX1111
 	select SPI
 	select SPI_MASTER
 
-config PXA310_ULPI
-	bool
-
-config PXA_SYSTEMS_CPLDS
-	tristate "Motherboard cplds"
-	default ARCH_LUBBOCK || MACH_MAINSTONE
-	help
-	  This driver supports the Lubbock and Mainstone multifunction chip
-	  found on the pxa25x development platform system (Lubbock) and pxa27x
-	  development platform system (Mainstone). This IO board supports the
-	  interrupts handling, ethernet controller, flash chips, etc ...
-
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 177abe584dd5..faccdd356482 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -12,10 +12,9 @@ obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 # SoC-specific code
 obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
 obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
-obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
 # NOTE: keep the order of boards in accordance to their order in Kconfig
 
@@ -24,64 +23,10 @@ obj-$(CONFIG_MACH_PXA25X_DT)	+= pxa-dt.o
 obj-$(CONFIG_MACH_PXA27X_DT)	+= pxa-dt.o
 obj-$(CONFIG_MACH_PXA3XX_DT)	+= pxa-dt.o
 
-# Intel/Marvell Dev Platforms
-obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
-obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
-obj-$(CONFIG_MACH_ZYLONITE300)	+= zylonite.o zylonite_pxa300.o
-obj-$(CONFIG_MACH_ZYLONITE320)	+= zylonite.o zylonite_pxa320.o
-obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
-obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
-obj-$(CONFIG_MACH_SAAR)		+= saar.o
-
 # 3rd Party Dev Platforms
-obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
-obj-$(CONFIG_ARCH_VIPER)	+= viper.o
-obj-$(CONFIG_MACH_ARCOM_ZEUS)	+= zeus.o
-obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
-obj-$(CONFIG_MACH_CSB726)	+= csb726.o
-obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
-obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
-obj-$(CONFIG_MACH_CAPC7117)     += capc7117.o mxm8x10.o
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
-obj-$(CONFIG_MACH_INTELMOTE2)	+= stargate2.o
-obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
-obj-$(CONFIG_MACH_XCEP)         += xcep.o
-obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
-obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
-obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
-obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
-obj-$(CONFIG_MACH_COLIBRI)			+= colibri-pxa270.o
-obj-$(CONFIG_MACH_COLIBRI_EVALBOARD)	+= colibri-evalboard.o
-obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME)	+= colibri-pxa270-income.o
-obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
-obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
-obj-$(CONFIG_MACH_VPAC270)	+= vpac270.o
 
 # End-user Products
-obj-$(CONFIG_MACH_H4700)	+= hx4700.o
-obj-$(CONFIG_MACH_H5000)	+= h5000.o
-obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
-obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
-obj-$(CONFIG_PXA_EZX)           += ezx.o
-obj-$(CONFIG_MACH_MP900C)	+= mp900.o
-obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
-obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
-obj-$(CONFIG_MACH_PALM27X)	+= palm27x.o
-obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
-obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
-obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
-obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
-obj-$(CONFIG_PALM_TREO)		+= palmtreo.o
-obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
-obj-$(CONFIG_MACH_POODLE)	+= poodle.o
-obj-$(CONFIG_MACH_TOSA)		+= tosa.o
-obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
-obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
-obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
-
-obj-$(CONFIG_PXA_SYSTEMS_CPLDS)	+= pxa_cplds_irqs.o
-obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/Makefile.boot b/arch/arm/mach-pxa/Makefile.boot
deleted file mode 100644
index bb6e353ecf06..000000000000
--- a/arch/arm/mach-pxa/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0xa0008000
-
diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/addr-map.h
index 93cfe7dbfec6..93cfe7dbfec6 100644
--- a/arch/arm/mach-pxa/include/mach/addr-map.h
+++ b/arch/arm/mach-pxa/addr-map.h
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index 17d08abeeb17..4b55bc89db8f 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -30,7 +30,7 @@
 
 #include "gumstix.h"
 #include "mfp-pxa25x.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 #include <linux/platform_data/video-pxafb.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
deleted file mode 100644
index 26140249c784..000000000000
--- a/arch/arm/mach-pxa/balloon3.c
+++ /dev/null
@@ -1,821 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/balloon3.c
- *
- *  Support for Balloonboard.org Balloon3 board.
- *
- *  Author:	Nick Bane, Wookey, Jonathan McDowell
- *  Created:	June, 2006
- *  Copyright:	Toby Churchill Ltd
- *  Derived from mainstone.c, by Nico Pitre
- */
-
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/ioport.h>
-#include <linux/ucb1400.h>
-#include <linux/mtd/mtd.h>
-#include <linux/types.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/regulator/max1586.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include "pxa27x.h"
-#include <mach/balloon3.h>
-#include <mach/audio.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include "pxa27x-udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long balloon3_pin_config[] __initdata = {
-	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* Reset, configured as GPIO wakeup source */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-};
-
-/******************************************************************************
- * Compatibility: Parameter parsing
- ******************************************************************************/
-static unsigned long balloon3_irq_enabled;
-
-static unsigned long balloon3_features_present =
-		(1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
-		(1 << BALLOON3_FEATURE_AUDIO) |
-		(1 << BALLOON3_FEATURE_TOPPOLY);
-
-int balloon3_has(enum balloon3_features feature)
-{
-	return (balloon3_features_present & (1 << feature)) ? 1 : 0;
-}
-EXPORT_SYMBOL_GPL(balloon3_has);
-
-int __init parse_balloon3_features(char *arg)
-{
-	if (!arg)
-		return 0;
-
-	return kstrtoul(arg, 0, &balloon3_features_present);
-}
-early_param("balloon3_features", parse_balloon3_features);
-
-/******************************************************************************
- * Compact Flash slot
- ******************************************************************************/
-#if	defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
-static unsigned long balloon3_cf_pin_config[] __initdata = {
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-};
-
-static void __init balloon3_cf_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_CF))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_cf_pin_config));
-}
-#else
-static inline void balloon3_cf_init(void) {}
-#endif
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition balloon3_nor_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data balloon3_flash_data[] = {
-	{
-		.width		= 2,	/* bankwidth in bytes */
-		.parts		= balloon3_nor_partitions,
-		.nr_parts	= ARRAY_SIZE(balloon3_nor_partitions)
-	}
-};
-
-static struct resource balloon3_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device balloon3_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &balloon3_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = balloon3_flash_data,
-	},
-};
-static void __init balloon3_nor_init(void)
-{
-	platform_device_register(&balloon3_flash);
-}
-#else
-static inline void balloon3_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Audio and Touchscreen
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static unsigned long balloon3_ac97_pin_config[] __initdata = {
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO113_AC97_nRESET,
-	GPIO95_GPIO,
-};
-
-static struct ucb1400_pdata vpac270_ucb1400_pdata = {
-	.irq		= PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ),
-};
-
-
-static struct platform_device balloon3_ucb1400_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &vpac270_ucb1400_pdata,
-	},
-};
-
-static void __init balloon3_ts_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
-	pxa_set_ac97_info(NULL);
-	platform_device_register(&balloon3_ucb1400_device);
-}
-#else
-static inline void balloon3_ts_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static unsigned long balloon3_lcd_pin_config[] __initdata = {
-	GPIOxx_LCD_TFT_16BPP,
-	GPIO99_GPIO,
-};
-
-static struct pxafb_mode_info balloon3_lcd_modes[] = {
-	{
-		.pixclock		= 38000,
-		.xres			= 480,
-		.yres			= 640,
-		.bpp			= 16,
-		.hsync_len		= 8,
-		.left_margin		= 8,
-		.right_margin		= 8,
-		.vsync_len		= 2,
-		.upper_margin		= 4,
-		.lower_margin		= 5,
-		.sync			= 0,
-	},
-};
-
-static struct pxafb_mach_info balloon3_lcd_screen = {
-	.modes			= balloon3_lcd_modes,
-	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void balloon3_backlight_power(int on)
-{
-	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
-}
-
-static void __init balloon3_lcd_init(void)
-{
-	int ret;
-
-	if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
-
-	ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
-	if (ret) {
-		pr_err("Requesting BKL-ON GPIO failed!\n");
-		goto err;
-	}
-
-	ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
-	if (ret) {
-		pr_err("Setting BKL-ON GPIO direction failed!\n");
-		goto err2;
-	}
-
-	balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
-	pxa_set_fb_info(NULL, &balloon3_lcd_screen);
-	return;
-
-err2:
-	gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
-err:
-	return;
-}
-#else
-static inline void balloon3_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static unsigned long balloon3_mmc_pin_config[] __initdata = {
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-};
-
-static struct pxamci_platform_data balloon3_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static void __init balloon3_mmc_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
-	pxa_set_mci_info(&balloon3_mci_platform_data);
-}
-#else
-static inline void balloon3_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Gadget
- ******************************************************************************/
-#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static void balloon3_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR &= ~UP2OCR_DPPUE;
-}
-
-static int balloon3_udc_is_connected(void)
-{
-	return 1;
-}
-
-static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
-	.udc_command		= balloon3_udc_command,
-	.udc_is_connected	= balloon3_udc_is_connected,
-	.gpio_pullup		= -1,
-};
-
-static void __init balloon3_udc_init(void)
-{
-	pxa_set_udc_info(&balloon3_udc_info);
-}
-#else
-static inline void balloon3_udc_init(void) {}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data balloon3_ficp_platform_data = {
-	.transceiver_cap	= IR_FIRMODE | IR_SIRMODE | IR_OFF,
-};
-
-static void __init balloon3_irda_init(void)
-{
-	pxa_set_ficp_info(&balloon3_ficp_platform_data);
-}
-#else
-static inline void balloon3_irda_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static unsigned long balloon3_uhc_pin_config[] __initdata = {
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-};
-
-static struct pxaohci_platform_data balloon3_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init balloon3_uhc_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_OHCI))
-		return;
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_uhc_pin_config));
-	pxa_set_ohci_info(&balloon3_ohci_info);
-}
-#else
-static inline void balloon3_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static unsigned long balloon3_led_pin_config[] __initdata = {
-	GPIO9_GPIO,	/* NAND activity LED */
-	GPIO10_GPIO,	/* Heartbeat LED */
-};
-
-struct gpio_led balloon3_gpio_leds[] = {
-	{
-		.name			= "balloon3:green:idle",
-		.default_trigger	= "heartbeat",
-		.gpio			= BALLOON3_GPIO_LED_IDLE,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:green:nand",
-		.default_trigger	= "nand-disk",
-		.gpio			= BALLOON3_GPIO_LED_NAND,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data balloon3_gpio_led_info = {
-	.leds		= balloon3_gpio_leds,
-	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
-};
-
-static struct platform_device balloon3_leds = {
-	.name	= "leds-gpio",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &balloon3_gpio_led_info,
-	}
-};
-
-struct gpio_led balloon3_pcf_gpio_leds[] = {
-	{
-		.name			= "balloon3:green:led0",
-		.gpio			= BALLOON3_PCF_GPIO_LED0,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:green:led1",
-		.gpio			= BALLOON3_PCF_GPIO_LED1,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led2",
-		.gpio			= BALLOON3_PCF_GPIO_LED2,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led3",
-		.gpio			= BALLOON3_PCF_GPIO_LED3,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led4",
-		.gpio			= BALLOON3_PCF_GPIO_LED4,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led5",
-		.gpio			= BALLOON3_PCF_GPIO_LED5,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:red:led6",
-		.gpio			= BALLOON3_PCF_GPIO_LED6,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:red:led7",
-		.gpio			= BALLOON3_PCF_GPIO_LED7,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = {
-	.leds		= balloon3_pcf_gpio_leds,
-	.num_leds	= ARRAY_SIZE(balloon3_pcf_gpio_leds),
-};
-
-static struct platform_device balloon3_pcf_leds = {
-	.name	= "leds-gpio",
-	.id	= 1,
-	.dev	= {
-		.platform_data	= &balloon3_pcf_gpio_led_info,
-	}
-};
-
-static void __init balloon3_leds_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_led_pin_config));
-	platform_device_register(&balloon3_leds);
-	platform_device_register(&balloon3_pcf_leds);
-}
-#else
-static inline void balloon3_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * FPGA IRQ
- ******************************************************************************/
-static void balloon3_mask_irq(struct irq_data *d)
-{
-	int balloon3_irq = (d->irq - BALLOON3_IRQ(0));
-	balloon3_irq_enabled &= ~(1 << balloon3_irq);
-	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
-
-static void balloon3_unmask_irq(struct irq_data *d)
-{
-	int balloon3_irq = (d->irq - BALLOON3_IRQ(0));
-	balloon3_irq_enabled |= (1 << balloon3_irq);
-	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
-
-static struct irq_chip balloon3_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= balloon3_mask_irq,
-	.irq_mask	= balloon3_mask_irq,
-	.irq_unmask	= balloon3_unmask_irq,
-};
-
-static void balloon3_irq_handler(struct irq_desc *desc)
-{
-	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
-					balloon3_irq_enabled;
-	do {
-		struct irq_data *d = irq_desc_get_irq_data(desc);
-		struct irq_chip *chip = irq_desc_get_chip(desc);
-		unsigned int irq;
-
-		/* clear useless edge notification */
-		if (chip->irq_ack)
-			chip->irq_ack(d);
-
-		while (pending) {
-			irq = BALLOON3_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-			pending &= pending - 1;
-		}
-		pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
-				balloon3_irq_enabled;
-	} while (pending);
-}
-
-static void __init balloon3_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-	/* setup extra Balloon3 irqs */
-	for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
-		irq_set_chip_and_handler(irq, &balloon3_irq_chip,
-					 handle_level_irq);
-		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-
-	irq_set_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
-	irq_set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
-
-	pr_debug("%s: chained handler installed - irq %d automatically "
-		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
-}
-
-/******************************************************************************
- * GPIO expander
- ******************************************************************************/
-#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE)
-static struct pcf857x_platform_data balloon3_pcf857x_pdata = {
-	.gpio_base	= BALLOON3_PCF_GPIO_BASE,
-	.n_latch	= 0,
-	.setup		= NULL,
-	.teardown	= NULL,
-	.context	= NULL,
-};
-
-static struct i2c_board_info __initdata balloon3_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("pcf8574a", 0x38),
-		.platform_data	= &balloon3_pcf857x_pdata,
-	},
-};
-
-static void __init balloon3_i2c_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs));
-}
-#else
-static inline void balloon3_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * NAND
- ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static void balloon3_nand_cmd_ctl(struct nand_chip *this, int cmd,
-				  unsigned int ctrl)
-{
-	uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if (ctrl & NAND_CLE)
-			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLCLE;
-		else
-			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLCLE;
-
-		if (ctrl & NAND_ALE)
-			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLALE;
-		else
-			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLALE;
-
-		if (balloon3_ctl_clr)
-			__raw_writel(balloon3_ctl_clr,
-				BALLOON3_NAND_CONTROL_REG);
-		if (balloon3_ctl_set)
-			__raw_writel(balloon3_ctl_set,
-				BALLOON3_NAND_CONTROL_REG +
-				BALLOON3_FPGA_SETnCLR);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->legacy.IO_ADDR_W);
-}
-
-static void balloon3_nand_select_chip(struct nand_chip *this, int chip)
-{
-	if (chip < 0 || chip > 3)
-		return;
-
-	/* Assert all nCE lines */
-	__raw_writew(
-		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
-		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3,
-		BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
-
-	/* Deassert correct nCE line */
-	__raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip,
-		BALLOON3_NAND_CONTROL_REG);
-}
-
-static int balloon3_nand_dev_ready(struct nand_chip *this)
-{
-	return __raw_readl(BALLOON3_NAND_STAT_REG) & BALLOON3_NAND_STAT_RNB;
-}
-
-static int balloon3_nand_probe(struct platform_device *pdev)
-{
-	uint16_t ver;
-	int ret;
-
-	__raw_writew(BALLOON3_NAND_CONTROL2_16BIT,
-		BALLOON3_NAND_CONTROL2_REG + BALLOON3_FPGA_SETnCLR);
-
-	ver = __raw_readw(BALLOON3_FPGA_VER);
-	if (ver < 0x4f08)
-		pr_warn("The FPGA code, version 0x%04x, is too old. "
-			"NAND support might be broken in this version!", ver);
-
-	/* Power up the NAND chips */
-	ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND");
-	if (ret)
-		goto err1;
-
-	ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1);
-	if (ret)
-		goto err2;
-
-	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
-
-	/* Deassert all nCE lines and write protect line */
-	__raw_writel(
-		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
-		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
-		BALLOON3_NAND_CONTROL_FLWP,
-		BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
-	return 0;
-
-err2:
-	gpio_free(BALLOON3_GPIO_RUN_NAND);
-err1:
-	return ret;
-}
-
-static void balloon3_nand_remove(struct platform_device *pdev)
-{
-	/* Power down the NAND chips */
-	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0);
-	gpio_free(BALLOON3_GPIO_RUN_NAND);
-}
-
-static struct mtd_partition balloon3_partition_info[] = {
-	[0] = {
-		.name	= "Boot",
-		.offset	= 0,
-		.size	= SZ_4M,
-	},
-	[1] = {
-		.name	= "RootFS",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL
-	},
-};
-
-struct platform_nand_data balloon3_nand_pdata = {
-	.chip = {
-		.nr_chips	= 4,
-		.chip_offset	= 0,
-		.nr_partitions	= ARRAY_SIZE(balloon3_partition_info),
-		.partitions	= balloon3_partition_info,
-		.chip_delay	= 50,
-	},
-	.ctrl = {
-		.dev_ready	= balloon3_nand_dev_ready,
-		.select_chip	= balloon3_nand_select_chip,
-		.cmd_ctrl	= balloon3_nand_cmd_ctl,
-		.probe		= balloon3_nand_probe,
-		.remove		= balloon3_nand_remove,
-	},
-};
-
-static struct resource balloon3_nand_resource[] = {
-	[0] = {
-		.start = BALLOON3_NAND_BASE,
-		.end   = BALLOON3_NAND_BASE + 0x4,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device balloon3_nand = {
-	.name		= "gen_nand",
-	.num_resources	= ARRAY_SIZE(balloon3_nand_resource),
-	.resource	= balloon3_nand_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data = &balloon3_nand_pdata,
-	}
-};
-
-static void __init balloon3_nand_init(void)
-{
-	platform_device_register(&balloon3_nand);
-}
-#else
-static inline void balloon3_nand_init(void) {}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data balloon3_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 900000,
-		.max_uV		= 1705000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= balloon3_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(balloon3_max1587a_consumers),
-};
-
-static struct max1586_subdev_data balloon3_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &balloon3_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data balloon3_max1587a_info = {
-	.subdevs     = balloon3_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs),
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &balloon3_max1587a_info,
-	},
-};
-
-static void __init balloon3_pmic_init(void)
-{
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info));
-}
-#else
-static inline void balloon3_pmic_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init balloon3_init(void)
-{
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	balloon3_i2c_init();
-	balloon3_irda_init();
-	balloon3_lcd_init();
-	balloon3_leds_init();
-	balloon3_mmc_init();
-	balloon3_nand_init();
-	balloon3_nor_init();
-	balloon3_pmic_init();
-	balloon3_ts_init();
-	balloon3_udc_init();
-	balloon3_uhc_init();
-	balloon3_cf_init();
-}
-
-static struct map_desc balloon3_io_desc[] __initdata = {
-	{	/* CPLD/FPGA */
-		.virtual	= (unsigned long)BALLOON3_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(BALLOON3_FPGA_PHYS),
-		.length		= BALLOON3_FPGA_LENGTH,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init balloon3_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
-}
-
-MACHINE_START(BALLOON3, "Balloon3")
-	/* Maintainer: Nick Bane. */
-	.map_io		= balloon3_map_io,
-	.nr_irqs	= BALLOON3_NR_IRQS,
-	.init_irq	= balloon3_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= balloon3_init,
-	.atag_offset	= 0x100,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
deleted file mode 100644
index 7712327f56a8..000000000000
--- a/arch/arm/mach-pxa/capc7117.c
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/capc7117.c
- *
- * Support for the Embedian CAPC-7117 Evaluation Kit
- * based on the Embedian MXM-8x10 Computer on Module
- *
- * Copyright (C) 2009 Embedian Inc.
- * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
- *
- * 2007-09-04: eric miao <eric.y.miao@gmail.com>
- *             rewrite to align with latest kernel
- *
- * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
- *             Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
- *             rework for upstream merge
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/serial_8250.h>
-#include <linux/gpio.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa320.h"
-#include "mxm8x10.h"
-
-#include "generic.h"
-
-/* IDE (PATA) Support */
-static struct pata_platform_info pata_platform_data = {
-	.ioport_shift = 1
-};
-
-static struct resource capc7117_ide_resources[] = {
-	[0] = {
-	       .start = 0x11000020,
-	       .end = 0x1100003f,
-	       .flags = IORESOURCE_MEM
-	},
-	[1] = {
-	       .start = 0x1100001c,
-	       .end = 0x1100001c,
-	       .flags = IORESOURCE_MEM
-	},
-	[2] = {
-	       .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
-	       .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
-	       .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
-	}
-};
-
-static struct platform_device capc7117_ide_device = {
-	.name = "pata_platform",
-	.num_resources = ARRAY_SIZE(capc7117_ide_resources),
-	.resource = capc7117_ide_resources,
-	.dev = {
-		.platform_data = &pata_platform_data,
-		.coherent_dma_mask = ~0		/* grumble */
-	}
-};
-
-static void __init capc7117_ide_init(void)
-{
-	platform_device_register(&capc7117_ide_device);
-}
-
-/* TI16C752 UART support */
-#define	TI16C752_FLAGS		(UPF_BOOT_AUTOCONF | \
-					UPF_IOREMAP | \
-					UPF_BUGGY_UART | \
-					UPF_SKIP_TEST)
-#define	TI16C752_UARTCLK	(22118400)
-static struct plat_serial8250_port ti16c752_platform_data[] = {
-	[0] = {
-	       .mapbase = 0x14000000,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO78)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[1] = {
-	       .mapbase = 0x14000040,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO79)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[2] = {
-	       .mapbase = 0x14000080,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO80)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[3] = {
-	       .mapbase = 0x140000c0,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO81)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[4] = {
-	       /* end of array */
-	}
-};
-
-static struct platform_device ti16c752_device = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = ti16c752_platform_data
-	}
-};
-
-static void __init capc7117_uarts_init(void)
-{
-	platform_device_register(&ti16c752_device);
-}
-
-static void __init capc7117_init(void)
-{
-	/* Init CoM */
-	mxm_8x10_barebones_init();
-
-	/* Init evaluation board peripherals */
-	mxm_8x10_ac97_init();
-	mxm_8x10_usb_host_init();
-	mxm_8x10_mmc_init();
-
-	capc7117_uarts_init();
-	capc7117_ide_init();
-
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(CAPC7117,
-	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
-	.atag_offset = 0x100,
-	.map_io = pxa3xx_map_io,
-	.nr_irqs = PXA_NR_IRQS,
-	.init_irq = pxa3xx_init_irq,
-	.handle_irq = pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine = capc7117_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
deleted file mode 100644
index 2e35354b61f5..000000000000
--- a/arch/arm/mach-pxa/cm-x300.c
+++ /dev/null
@@ -1,881 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/cm-x300.c
- *
- * Support for the CompuLab CM-X300 modules
- *
- * Copyright (C) 2008,2009 CompuLab Ltd.
- *
- * Mike Rapoport <mike@compulab.co.il>
- * Igor Grinberg <grinberg@compulab.co.il>
- */
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/dm9000.h>
-#include <linux/leds.h>
-#include <linux/platform_data/rtc-v3020.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <linux/mfd/da903x.h>
-#include <linux/regulator/machine.h>
-#include <linux/power_supply.h>
-#include <linux/apm-emulation.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/tdo24m.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/setup.h>
-#include <asm/system_info.h>
-
-#include "pxa300.h"
-#include "pxa27x-udc.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include <mach/audio.h>
-#include <linux/platform_data/usb-pxa3xx-ulpi.h>
-
-#include <asm/mach/map.h>
-
-#include "generic.h"
-#include "devices.h"
-
-#define CM_X300_ETH_PHYS	0x08000010
-
-#define GPIO82_MMC_IRQ		(82)
-#define GPIO85_MMC_WP		(85)
-
-#define	CM_X300_MMC_IRQ		PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ)
-
-#define GPIO95_RTC_CS		(95)
-#define GPIO96_RTC_WR		(96)
-#define GPIO97_RTC_RD		(97)
-#define GPIO98_RTC_IO		(98)
-
-#define GPIO_ULPI_PHY_RST	(127)
-
-static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-
-	/* BTUART */
-	GPIO111_UART2_RTS,
-	GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
-	GPIO113_UART2_TXD,
-	GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
-
-	/* STUART */
-	GPIO109_UART3_TXD,
-	GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
-
-	/* AC97 */
-	GPIO23_AC97_nACRESET,
-	GPIO24_AC97_SYSCLK,
-	GPIO29_AC97_BITCLK,
-	GPIO25_AC97_SDATA_IN_0,
-	GPIO27_AC97_SDATA_OUT,
-	GPIO28_AC97_SYNC,
-
-	/* Keypad */
-	GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
-	GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
-	GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
-	GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
-	GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
-	GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-	GPIO4_2_KP_MKOUT_5,
-
-	/* MMC1 */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,	/* CMD0 for slot 0 */
-
-	/* MMC2 */
-	GPIO9_MMC2_DAT0,
-	GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO11_MMC2_DAT2,
-	GPIO12_MMC2_DAT3,
-	GPIO13_MMC2_CLK,
-	GPIO14_MMC2_CMD,
-
-	/* FFUART */
-	GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO31_UART1_TXD,
-	GPIO32_UART1_CTS,
-	GPIO37_UART1_RTS,
-	GPIO33_UART1_DCD,
-	GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
-	GPIO35_UART1_RI,
-	GPIO36_UART1_DTR,
-
-	/* GPIOs */
-	GPIO82_GPIO | MFP_PULL_HIGH,	/* MMC CD */
-	GPIO85_GPIO,			/* MMC WP */
-	GPIO99_GPIO,			/* Ethernet IRQ */
-
-	/* RTC GPIOs */
-	GPIO95_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC CS */
-	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC WR */
-	GPIO97_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC RD */
-	GPIO98_GPIO,				/* RTC IO */
-
-	/* Standard I2C */
-	GPIO21_I2C_SCL,
-	GPIO22_I2C_SDA,
-
-	/* PWM Backlight */
-	GPIO19_PWM2_OUT,
-};
-
-static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
-	/* GPIOs */
-	GPIO79_GPIO,			/* LED */
-	GPIO77_GPIO,			/* WiFi reset */
-	GPIO78_GPIO,			/* BT reset */
-};
-
-static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
-	/* GPIOs */
-	GPIO76_GPIO,			/* LED */
-	GPIO71_GPIO,			/* WiFi reset */
-	GPIO70_GPIO,			/* BT reset */
-};
-
-static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
-	/* USB PORT 2 */
-	ULPI_STP,
-	ULPI_NXT,
-	ULPI_DIR,
-	GPIO30_ULPI_DATA_OUT_0,
-	GPIO31_ULPI_DATA_OUT_1,
-	GPIO32_ULPI_DATA_OUT_2,
-	GPIO33_ULPI_DATA_OUT_3,
-	GPIO34_ULPI_DATA_OUT_4,
-	GPIO35_ULPI_DATA_OUT_5,
-	GPIO36_ULPI_DATA_OUT_6,
-	GPIO37_ULPI_DATA_OUT_7,
-	GPIO38_ULPI_CLK,
-	/* external PHY reset pin */
-	GPIO127_GPIO,
-
-	/* USB PORT 3 */
-	GPIO77_USB_P3_1,
-	GPIO78_USB_P3_2,
-	GPIO79_USB_P3_3,
-	GPIO80_USB_P3_4,
-	GPIO81_USB_P3_5,
-	GPIO82_USB_P3_6,
-	GPIO0_2_USBH_PEN,
-};
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= CM_X300_ETH_PHYS,
-		.end	= CM_X300_ETH_PHYS + 0x3,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= CM_X300_ETH_PHYS + 0x4,
-		.end	= CM_X300_ETH_PHYS + 0x4 + 500,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct dm9000_plat_data cm_x300_dm9000_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.dev		= {
-		.platform_data = &cm_x300_dm9000_platdata,
-	}
-
-};
-
-static void __init cm_x300_init_dm9000(void)
-{
-	platform_device_register(&dm9000_device);
-}
-#else
-static inline void cm_x300_init_dm9000(void) {}
-#endif
-
-/* LCD */
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info cm_x300_lcd_modes[] = {
-	[0] = {
-		.pixclock	= 38250,
-		.bpp		= 16,
-		.xres		= 480,
-		.yres		= 640,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.left_margin	= 8,
-		.upper_margin	= 2,
-		.right_margin	= 24,
-		.lower_margin	= 4,
-		.cmap_greyscale	= 0,
-	},
-	[1] = {
-		.pixclock	= 153800,
-		.bpp		= 16,
-		.xres		= 240,
-		.yres		= 320,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.left_margin	= 8,
-		.upper_margin	= 2,
-		.right_margin	= 88,
-		.lower_margin	= 2,
-		.cmap_greyscale	= 0,
-	},
-};
-
-static struct pxafb_mach_info cm_x300_lcd = {
-	.modes			= cm_x300_lcd_modes,
-	.num_modes		= ARRAY_SIZE(cm_x300_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init cm_x300_init_lcd(void)
-{
-	pxa_set_fb_info(NULL, &cm_x300_lcd);
-}
-#else
-static inline void cm_x300_init_lcd(void) {}
-#endif
-
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct pwm_lookup cm_x300_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 10000,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data cm_x300_backlight_data = {
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-};
-
-static struct platform_device cm_x300_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm0.dev,
-		.platform_data	= &cm_x300_backlight_data,
-	},
-};
-
-static void cm_x300_init_bl(void)
-{
-	pwm_add_table(cm_x300_pwm_lookup, ARRAY_SIZE(cm_x300_pwm_lookup));
-	platform_device_register(&cm_x300_backlight_device);
-}
-#else
-static inline void cm_x300_init_bl(void) {}
-#endif
-
-#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
-#define GPIO_LCD_BASE	(144)
-#define GPIO_LCD_DIN	(GPIO_LCD_BASE + 8)	/* aux_gpio3_0 */
-#define GPIO_LCD_DOUT	(GPIO_LCD_BASE + 9)	/* aux_gpio3_1 */
-#define GPIO_LCD_SCL	(GPIO_LCD_BASE + 10)	/* aux_gpio3_2 */
-#define GPIO_LCD_CS	(GPIO_LCD_BASE + 11)	/* aux_gpio3_3 */
-#define LCD_SPI_BUS_NUM	(1)
-
-static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
-	.num_chipselect	= 1,
-};
-
-static struct platform_device cm_x300_spi_gpio = {
-	.name		= "spi_gpio",
-	.id		= LCD_SPI_BUS_NUM,
-	.dev		= {
-		.platform_data	= &cm_x300_spi_gpio_pdata,
-	},
-};
-
-static struct gpiod_lookup_table cm_x300_spi_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_LCD_SCL,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DIN,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DOUT,
-			    "miso", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_LCD_CS,
-			    "cs", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
-	.model = TDO35S,
-};
-
-static struct spi_board_info cm_x300_spi_devices[] __initdata = {
-	{
-		.modalias		= "tdo24m",
-		.max_speed_hz		= 1000000,
-		.bus_num		= LCD_SPI_BUS_NUM,
-		.chip_select		= 0,
-		.platform_data		= &cm_x300_tdo24m_pdata,
-	},
-};
-
-static void __init cm_x300_init_spi(void)
-{
-	spi_register_board_info(cm_x300_spi_devices,
-				ARRAY_SIZE(cm_x300_spi_devices));
-	gpiod_add_lookup_table(&cm_x300_spi_gpiod_table);
-	platform_device_register(&cm_x300_spi_gpio);
-}
-#else
-static inline void cm_x300_init_spi(void) {}
-#endif
-
-#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
-static void __init cm_x300_init_ac97(void)
-{
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void cm_x300_init_ac97(void) {}
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-static struct mtd_partition cm_x300_nand_partitions[] = {
-	[0] = {
-		.name        = "OBM",
-		.offset      = 0,
-		.size        = SZ_256K,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[1] = {
-		.name        = "U-Boot",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_256K,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[2] = {
-		.name        = "Environment",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_256K,
-	},
-	[3] = {
-		.name        = "reserved",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_256K + SZ_1M,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[4] = {
-		.name        = "kernel",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_4M,
-	},
-	[5] = {
-		.name        = "fs",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
-	.keep_config	= 1,
-	.parts		= cm_x300_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(cm_x300_nand_partitions),
-};
-
-static void __init cm_x300_init_nand(void)
-{
-	pxa3xx_set_nand_info(&cm_x300_nand_info);
-}
-#else
-static inline void cm_x300_init_nand(void) {}
-#endif
-
-#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-static struct pxamci_platform_data cm_x300_mci_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table cm_x300_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 82 */
-		GPIO_LOOKUP("gpio-pxa", GPIO82_MMC_IRQ, "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 85 */
-		GPIO_LOOKUP("gpio-pxa", GPIO85_MMC_WP, "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
-   no detection/ro pins */
-static int cm_x300_mci2_init(struct device *dev,
-			     irq_handler_t cm_x300_detect_int,
-	void *data)
-{
-	return 0;
-}
-
-static void cm_x300_mci2_exit(struct device *dev, void *data)
-{
-}
-
-static struct pxamci_platform_data cm_x300_mci2_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= cm_x300_mci2_init,
-	.exit			= cm_x300_mci2_exit,
-};
-
-static void __init cm_x300_init_mmc(void)
-{
-	gpiod_add_lookup_table(&cm_x300_mci_gpio_table);
-	pxa_set_mci_info(&cm_x300_mci_platform_data);
-	pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
-}
-#else
-static inline void cm_x300_init_mmc(void) {}
-#endif
-
-#if defined(CONFIG_PXA310_ULPI)
-static struct clk *pout_clk;
-
-static int cm_x300_ulpi_phy_reset(void)
-{
-	int err;
-
-	/* reset the PHY */
-	err = gpio_request_one(GPIO_ULPI_PHY_RST, GPIOF_OUT_INIT_LOW,
-			       "ulpi reset");
-	if (err) {
-		pr_err("failed to request ULPI reset GPIO: %d\n", err);
-		return err;
-	}
-
-	msleep(10);
-	gpio_set_value(GPIO_ULPI_PHY_RST, 1);
-	msleep(10);
-
-	gpio_free(GPIO_ULPI_PHY_RST);
-
-	return 0;
-}
-
-static int cm_x300_u2d_init(struct device *dev)
-{
-	int err = 0;
-
-	if (cpu_is_pxa310()) {
-		/* CLK_POUT is connected to the ULPI PHY */
-		pout_clk = clk_get(NULL, "CLK_POUT");
-		if (IS_ERR(pout_clk)) {
-			err = PTR_ERR(pout_clk);
-			pr_err("failed to get CLK_POUT: %d\n", err);
-			return err;
-		}
-		clk_prepare_enable(pout_clk);
-
-		err = cm_x300_ulpi_phy_reset();
-		if (err) {
-			clk_disable(pout_clk);
-			clk_put(pout_clk);
-		}
-	}
-
-	return err;
-}
-
-static void cm_x300_u2d_exit(struct device *dev)
-{
-	if (cpu_is_pxa310()) {
-		clk_disable_unprepare(pout_clk);
-		clk_put(pout_clk);
-	}
-}
-
-static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
-	.ulpi_mode	= ULPI_SER_6PIN,
-	.init		= cm_x300_u2d_init,
-	.exit		= cm_x300_u2d_exit,
-};
-
-static void __init cm_x300_init_u2d(void)
-{
-	pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
-}
-#else
-static inline void cm_x300_init_u2d(void) {}
-#endif
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int cm_x300_ohci_init(struct device *dev)
-{
-	if (cpu_is_pxa300())
-		UP2OCR = UP2OCR_HXS
-			| UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
-
-	return 0;
-}
-
-static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW,
-	.init		= cm_x300_ohci_init,
-};
-
-static void __init cm_x300_init_ohci(void)
-{
-	pxa_set_ohci_info(&cm_x300_ohci_platform_data);
-}
-#else
-static inline void cm_x300_init_ohci(void) {}
-#endif
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led cm_x300_leds[] = {
-	[0] = {
-		.name = "cm-x300:green",
-		.default_trigger = "heartbeat",
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data cm_x300_gpio_led_pdata = {
-	.num_leds = ARRAY_SIZE(cm_x300_leds),
-	.leds = cm_x300_leds,
-};
-
-static struct platform_device cm_x300_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cm_x300_gpio_led_pdata,
-	},
-};
-
-static void __init cm_x300_init_leds(void)
-{
-	if (system_rev < 130)
-		cm_x300_leds[0].gpio = 79;
-	else
-		cm_x300_leds[0].gpio = 76;
-
-	platform_device_register(&cm_x300_led_device);
-}
-#else
-static inline void cm_x300_init_leds(void) {}
-#endif
-
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-/* PCA9555 */
-static struct pca953x_platform_data cm_x300_gpio_ext_pdata_0 = {
-	.gpio_base = 128,
-};
-
-static struct pca953x_platform_data cm_x300_gpio_ext_pdata_1 = {
-	.gpio_base = 144,
-};
-
-static struct i2c_board_info cm_x300_gpio_ext_info[] = {
-	[0] = {
-		I2C_BOARD_INFO("pca9555", 0x24),
-		.platform_data = &cm_x300_gpio_ext_pdata_0,
-	},
-	[1] = {
-		I2C_BOARD_INFO("pca9555", 0x25),
-		.platform_data = &cm_x300_gpio_ext_pdata_1,
-	},
-};
-
-static void __init cm_x300_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, cm_x300_gpio_ext_info,
-				ARRAY_SIZE(cm_x300_gpio_ext_info));
-}
-#else
-static inline void cm_x300_init_i2c(void) {}
-#endif
-
-#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
-struct v3020_platform_data cm_x300_v3020_pdata = {
-	.use_gpio	= 1,
-	.gpio_cs	= GPIO95_RTC_CS,
-	.gpio_wr	= GPIO96_RTC_WR,
-	.gpio_rd	= GPIO97_RTC_RD,
-	.gpio_io	= GPIO98_RTC_IO,
-};
-
-static struct platform_device cm_x300_rtc_device = {
-	.name		= "v3020",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cm_x300_v3020_pdata,
-	}
-};
-
-static void __init cm_x300_init_rtc(void)
-{
-	platform_device_register(&cm_x300_rtc_device);
-}
-#else
-static inline void cm_x300_init_rtc(void) {}
-#endif
-
-/* Battery */
-struct power_supply_info cm_x300_psy_info = {
-	.name = "battery",
-	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.voltage_max_design = 4200000,
-	.voltage_min_design = 3000000,
-	.use_for_apm = 1,
-};
-
-static void cm_x300_battery_low(void)
-{
-#if defined(CONFIG_APM_EMULATION)
-	apm_queue_event(APM_LOW_BATTERY);
-#endif
-}
-
-static void cm_x300_battery_critical(void)
-{
-#if defined(CONFIG_APM_EMULATION)
-	apm_queue_event(APM_CRITICAL_SUSPEND);
-#endif
-}
-
-struct da9030_battery_info cm_x300_battery_info = {
-	.battery_info = &cm_x300_psy_info,
-
-	.charge_milliamp = 1000,
-	.charge_millivolt = 4200,
-
-	.vbat_low = 3600,
-	.vbat_crit = 3400,
-	.vbat_charge_start = 4100,
-	.vbat_charge_stop = 4200,
-	.vbat_charge_restart = 4000,
-
-	.vcharge_min = 3200,
-	.vcharge_max = 5500,
-
-	.tbat_low = 197,
-	.tbat_high = 78,
-	.tbat_restart = 100,
-
-	.batmon_interval = 0,
-
-	.battery_low = cm_x300_battery_low,
-	.battery_critical = cm_x300_battery_critical,
-};
-
-static struct regulator_consumer_supply buck2_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data buck2_data = {
-	.constraints = {
-		.min_uV = 1375000,
-		.max_uV = 1375000,
-		.state_mem = {
-			.enabled = 0,
-		},
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.apply_uV = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(buck2_consumers),
-	.consumer_supplies = buck2_consumers,
-};
-
-/* DA9030 */
-struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
-	{
-		.name = "da903x-battery",
-		.id = DA9030_ID_BAT,
-		.platform_data = &cm_x300_battery_info,
-	},
-	{
-		.name = "da903x-regulator",
-		.id = DA9030_ID_BUCK2,
-		.platform_data = &buck2_data,
-	},
-};
-
-static struct da903x_platform_data cm_x300_da9030_info = {
-	.num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
-	.subdevs = cm_x300_da9030_subdevs,
-};
-
-static struct i2c_board_info cm_x300_pmic_info = {
-	I2C_BOARD_INFO("da9030", 0x49),
-	.irq = IRQ_WAKEUP0,
-	.platform_data = &cm_x300_da9030_info,
-};
-
-static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
-	.use_pio = 1,
-};
-
-static void __init cm_x300_init_da9030(void)
-{
-	pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
-	i2c_register_board_info(1, &cm_x300_pmic_info, 1);
-	irq_set_irq_wake(IRQ_WAKEUP0, 1);
-}
-
-/* wi2wi gpio setting for system_rev >= 130 */
-static struct gpio cm_x300_wi2wi_gpios[] __initdata = {
-	{ 71, GPIOF_OUT_INIT_HIGH, "wlan en" },
-	{ 70, GPIOF_OUT_INIT_HIGH, "bt reset" },
-};
-
-static void __init cm_x300_init_wi2wi(void)
-{
-	int err;
-
-	if (system_rev < 130) {
-		cm_x300_wi2wi_gpios[0].gpio = 77;	/* wlan en */
-		cm_x300_wi2wi_gpios[1].gpio = 78;	/* bt reset */
-	}
-
-	/* Libertas and CSR reset */
-	err = gpio_request_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
-	if (err) {
-		pr_err("failed to request wifi/bt gpios: %d\n", err);
-		return;
-	}
-
-	udelay(10);
-	gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0);
-	udelay(10);
-	gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1);
-
-	gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
-}
-
-/* MFP */
-static void __init cm_x300_init_mfp(void)
-{
-	/* board-processor specific GPIO initialization */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
-
-	if (system_rev < 130)
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
-	else
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
-
-	if (cpu_is_pxa310())
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
-}
-
-static void __init cm_x300_init(void)
-{
-	cm_x300_init_mfp();
-
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	if (cpu_is_pxa300())
-		pxa_set_ffuart_info(NULL);
-
-	cm_x300_init_da9030();
-	cm_x300_init_dm9000();
-	cm_x300_init_lcd();
-	cm_x300_init_u2d();
-	cm_x300_init_ohci();
-	cm_x300_init_mmc();
-	cm_x300_init_nand();
-	cm_x300_init_leds();
-	cm_x300_init_i2c();
-	cm_x300_init_spi();
-	cm_x300_init_rtc();
-	cm_x300_init_ac97();
-	cm_x300_init_wi2wi();
-	cm_x300_init_bl();
-
-	regulator_has_full_constraints();
-}
-
-static void __init cm_x300_fixup(struct tag *tags, char **cmdline)
-{
-	/* Make sure that mi->bank[0].start = PHYS_ADDR */
-	for (; tags->hdr.size; tags = tag_next(tags))
-		if (tags->hdr.tag == ATAG_MEM &&
-			tags->u.mem.start == 0x80000000) {
-			tags->u.mem.start = 0xa0000000;
-			break;
-		}
-}
-
-MACHINE_START(CM_X300, "CM-X300 module")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= cm_x300_init,
-	.fixup		= cm_x300_fixup,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
deleted file mode 100644
index b9c173ede891..000000000000
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/colibri-evalboard.c
- *
- *  Support for Toradex Colibri Evaluation Carrier Board
- *  Daniel Mack <daniel@caiaq.de>
- *  Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/gpio/machine.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/mach/arch.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <asm/io.h>
-
-#include "pxa27x.h"
-#include "colibri.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "pxa27x-udc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data colibri_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static struct gpiod_lookup_table colibri_pxa270_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO0_COLIBRI_PXA270_SD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table colibri_pxa300_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO13_COLIBRI_PXA300_SD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table colibri_pxa320_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO28_COLIBRI_PXA320_SD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init colibri_mmc_init(void)
-{
-	if (machine_is_colibri())	/* PXA270 Colibri */
-		gpiod_add_lookup_table(&colibri_pxa270_mci_gpio_table);
-	if (machine_is_colibri300())	/* PXA300 Colibri */
-		gpiod_add_lookup_table(&colibri_pxa300_mci_gpio_table);
-	else				/* PXA320 Colibri */
-		gpiod_add_lookup_table(&colibri_pxa320_mci_gpio_table);
-
-	pxa_set_mci_info(&colibri_mci_platform_data);
-}
-#else
-static inline void colibri_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int colibri_ohci_init(struct device *dev)
-{
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-	return 0;
-}
-
-static struct pxaohci_platform_data colibri_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 |
-			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.init		= colibri_ohci_init,
-};
-
-static void __init colibri_uhc_init(void)
-{
-	/* Colibri PXA270 has two usb ports, TBA for 320 */
-	if (machine_is_colibri())
-		colibri_ohci_info.flags	|= ENABLE_PORT2;
-
-	pxa_set_ohci_info(&colibri_ohci_info);
-}
-#else
-static inline void colibri_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * I2C RTC
- ******************************************************************************/
-#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
-static struct i2c_board_info __initdata colibri_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("m41t00", 0x68),
-	},
-};
-
-static void __init colibri_rtc_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(colibri_i2c_devs));
-}
-#else
-static inline void colibri_rtc_init(void) {}
-#endif
-
-void __init colibri_evalboard_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	colibri_mmc_init();
-	colibri_uhc_init();
-	colibri_rtc_init();
-}
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
deleted file mode 100644
index e5879e8b0682..000000000000
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ /dev/null
@@ -1,237 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/income.c
- *
- * Support for Income s.r.o. SH-Dmaster PXA270 SBC
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- * Pavel Revak <palo@bielyvlk.sk>
- */
-
-#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "pxa27x.h"
-#include "pxa27x-udc.h"
-#include <linux/platform_data/video-pxafb.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define GPIO114_INCOME_ETH_IRQ  (114)
-#define GPIO0_INCOME_SD_DETECT  (0)
-#define GPIO0_INCOME_SD_RO      (1)
-#define GPIO54_INCOME_LED_A     (54)
-#define GPIO55_INCOME_LED_B     (55)
-#define GPIO113_INCOME_TS_IRQ   (113)
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data income_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static struct gpiod_lookup_table income_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 0 */
-		GPIO_LOOKUP("gpio-pxa", GPIO0_INCOME_SD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 1 */
-		GPIO_LOOKUP("gpio-pxa", GPIO0_INCOME_SD_RO,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init income_mmc_init(void)
-{
-	gpiod_add_lookup_table(&income_mci_gpio_table);
-	pxa_set_mci_info(&income_mci_platform_data);
-}
-#else
-static inline void income_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static struct pxaohci_platform_data income_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init income_uhc_init(void)
-{
-	pxa_set_ohci_info(&income_ohci_info);
-}
-#else
-static inline void income_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * LED
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led income_gpio_leds[] = {
-	{
-		.name			= "income:green:leda",
-		.default_trigger	= "none",
-		.gpio			= GPIO54_INCOME_LED_A,
-		.active_low		= 1,
-	},
-	{
-		.name			= "income:green:ledb",
-		.default_trigger	= "none",
-		.gpio			= GPIO55_INCOME_LED_B,
-		.active_low		= 1,
-	}
-};
-
-static struct gpio_led_platform_data income_gpio_led_info = {
-	.leds		= income_gpio_leds,
-	.num_leds	= ARRAY_SIZE(income_gpio_leds),
-};
-
-static struct platform_device income_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &income_gpio_led_info,
-	}
-};
-
-static void __init income_led_init(void)
-{
-	platform_device_register(&income_leds);
-}
-#else
-static inline void income_led_init(void) {}
-#endif
-
-/******************************************************************************
- * I2C
- ******************************************************************************/
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct i2c_board_info __initdata income_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("ds1340", 0x68),
-	}, {
-		I2C_BOARD_INFO("lm75", 0x4f),
-	},
-};
-
-static void __init income_i2c_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
-}
-#else
-static inline void income_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info income_lcd_modes[] = {
-{
-	.pixclock	= 144700,
-	.xres		= 320,
-	.yres		= 240,
-	.bpp		= 32,
-	.depth		= 18,
-
-	.left_margin	= 10,
-	.right_margin	= 10,
-	.upper_margin	= 7,
-	.lower_margin	= 8,
-
-	.hsync_len	= 20,
-	.vsync_len	= 2,
-
-	.sync		= FB_SYNC_VERT_HIGH_ACT,
-},
-};
-
-static struct pxafb_mach_info income_lcd_screen = {
-	.modes		= income_lcd_modes,
-	.num_modes	= ARRAY_SIZE(income_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init income_lcd_init(void)
-{
-	pxa_set_fb_info(NULL, &income_lcd_screen);
-}
-#else
-static inline void income_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct pwm_lookup income_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data income_backlight_data = {
-	.max_brightness	= 0x3ff,
-	.dft_brightness	= 0x1ff,
-};
-
-static struct platform_device income_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &income_backlight_data,
-	},
-};
-
-static void __init income_pwm_init(void)
-{
-	pwm_add_table(income_pwm_lookup, ARRAY_SIZE(income_pwm_lookup));
-	platform_device_register(&income_backlight);
-}
-#else
-static inline void income_pwm_init(void) {}
-#endif
-
-void __init colibri_pxa270_income_boardinit(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	income_mmc_init();
-	income_uhc_init();
-	income_led_init();
-	income_i2c_init();
-	income_lcd_init();
-	income_pwm_init();
-}
-
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
deleted file mode 100644
index 2f2cd2ae4187..000000000000
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ /dev/null
@@ -1,330 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/colibri-pxa270.c
- *
- *  Support for Toradex PXA270 based Colibri module
- *  Daniel Mack <daniel@caiaq.de>
- *  Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/ucb1400.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach-types.h>
-#include <linux/sizes.h>
-
-#include <mach/audio.h>
-#include "colibri.h"
-#include "pxa27x.h"
-
-#include "devices.h"
-#include "generic.h"
-
-/******************************************************************************
- * Evaluation board MFP
- ******************************************************************************/
-#ifdef	 CONFIG_MACH_COLIBRI_EVALBOARD
-static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO0_GPIO,	/* SD detect */
-
-	/* FFUART */
-	GPIO39_FFUART_TXD,
-	GPIO34_FFUART_RXD,
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	GPIO119_USBH2_PWR,
-	GPIO120_USBH2_PEN,
-
-	/* PCMCIA */
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO49_nPWE,
-	GPIO48_nPOE,
-	GPIO57_nIOIS16,
-	GPIO56_nPWAIT,
-	GPIO104_PSKTSEL,
-	GPIO53_GPIO,	/* RESET */
-	GPIO83_GPIO,	/* BVD1 */
-	GPIO82_GPIO,	/* BVD2 */
-	GPIO1_GPIO,	/* READY */
-	GPIO84_GPIO,	/* DETECT */
-	GPIO107_GPIO,	/* PPEN */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-#else
-static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {};
-#endif
-
-#ifdef	CONFIG_MACH_COLIBRI_PXA270_INCOME
-static mfp_cfg_t income_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO0_GPIO,	/* SD detect */
-	GPIO1_GPIO,	/* SD read-only */
-
-	/* FFUART */
-	GPIO39_FFUART_TXD,
-	GPIO34_FFUART_RXD,
-
-	/* BFUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* LED */
-	GPIO54_GPIO,	/* LED A */
-	GPIO55_GPIO,	/* LED B */
-};
-#else
-static mfp_cfg_t income_pin_config[] __initdata = {};
-#endif
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
-	/* Ethernet */
-	GPIO78_nCS_2,	/* Ethernet CS */
-	GPIO114_GPIO,	/* Ethernet IRQ */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO95_AC97_nRESET,
-	GPIO98_AC97_SYSCLK,
-	GPIO113_GPIO,	/* Touchscreen IRQ */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition colibri_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.offset =	0x00000000,
-		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE	/* force read-only */
-	}, {
-		.name =		"Kernel",
-		.offset =	0x00040000,
-		.size =		0x00400000,
-		.mask_flags =	0
-	}, {
-		.name =		"Rootfs",
-		.offset =	0x00440000,
-		.size =		MTDPART_SIZ_FULL,
-		.mask_flags =	0
-	}
-};
-
-static struct physmap_flash_data colibri_flash_data[] = {
-	{
-		.width		= 4,			/* bankwidth in bytes */
-		.parts		= colibri_partitions,
-		.nr_parts	= ARRAY_SIZE(colibri_partitions)
-	}
-};
-
-static struct resource colibri_pxa270_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device colibri_pxa270_flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev 	= {
-		.platform_data = colibri_flash_data,
-	},
-	.resource = &colibri_pxa270_flash_resource,
-	.num_resources = 1,
-};
-
-static void __init colibri_pxa270_nor_init(void)
-{
-	platform_device_register(&colibri_pxa270_flash_device);
-}
-#else
-static inline void colibri_pxa270_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Ethernet
- ******************************************************************************/
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource colibri_pxa270_dm9000_resources[] = {
-	{
-		.start	= PXA_CS2_PHYS,
-		.end	= PXA_CS2_PHYS + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= PXA_CS2_PHYS + 4,
-		.end	= PXA_CS2_PHYS + 4 + 500,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
-	},
-};
-
-static struct platform_device colibri_pxa270_dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(colibri_pxa270_dm9000_resources),
-	.resource	= colibri_pxa270_dm9000_resources,
-};
-
-static void __init colibri_pxa270_eth_init(void)
-{
-	platform_device_register(&colibri_pxa270_dm9000_device);
-}
-#else
-static inline void colibri_pxa270_eth_init(void) {}
-#endif
-
-/******************************************************************************
- * Audio and Touchscreen
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
-	.irq		= PXA_GPIO_TO_IRQ(GPIO113_COLIBRI_PXA270_TS_IRQ),
-};
-
-static struct platform_device colibri_pxa270_ucb1400_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &colibri_pxa270_ucb1400_pdata,
-	},
-};
-
-static void __init colibri_pxa270_tsc_init(void)
-{
-	pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
-	platform_device_register(&colibri_pxa270_ucb1400_device);
-}
-#else
-static inline void colibri_pxa270_tsc_init(void) {}
-#endif
-
-static int colibri_pxa270_baseboard;
-core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444);
-
-static void __init colibri_pxa270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
-
-	colibri_pxa270_nor_init();
-	colibri_pxa270_eth_init();
-	colibri_pxa270_tsc_init();
-
-	switch (colibri_pxa270_baseboard) {
-	case COLIBRI_EVALBOARD:
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(
-			colibri_pxa270_evalboard_pin_config));
-		colibri_evalboard_init();
-		break;
-	case COLIBRI_PXA270_INCOME:
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
-		colibri_pxa270_income_boardinit();
-		break;
-	default:
-		printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
-				colibri_pxa270_baseboard);
-	}
-
-	regulator_has_full_constraints();
-}
-
-/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
- * with the INCOME mach type or with COLIBRI and the kernel parameter
- * "colibri_pxa270_baseboard=1"
- */
-static void __init colibri_pxa270_income_init(void)
-{
-	colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME;
-	colibri_pxa270_init();
-}
-
-MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa270_init,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
-MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa270_income_init,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
deleted file mode 100644
index 82052dfd96b6..000000000000
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ /dev/null
@@ -1,192 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  arch/arm/mach-pxa/colibri-pxa300.c
- *
- *  Support for Toradex PXA300/310 based Colibri module
- *
- *  Daniel Mack <daniel@caiaq.de>
- *  Matthias Meier <matthias.j.meier@gmx.net>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-types.h>
-#include <linux/sizes.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-
-#include "pxa300.h"
-#include "colibri.h"
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "devices.h"
-
-
-#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
-static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO7_MMC1_CLK,
-	GPIO14_MMC1_CMD,
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO13_GPIO,	/* GPIO13_COLIBRI_PXA300_SD_DETECT */
-
-	/* UHC */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-	GPIO77_USB_P3_1,
-	GPIO78_USB_P3_2,
-	GPIO79_USB_P3_3,
-	GPIO80_USB_P3_4,
-	GPIO81_USB_P3_5,
-	GPIO82_USB_P3_6,
-
-	/* I2C */
-	GPIO21_I2C_SCL,
-	GPIO22_I2C_SDA,
-};
-#else
-static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {};
-#endif
-
-#if defined(CONFIG_AX88796)
-#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO26_GPIO)
-/*
- * Asix AX88796 Ethernet
- */
-static struct ax_plat_data colibri_asix_platdata = {
-	.flags		= 0, /* defined later */
-	.wordlength	= 2,
-};
-
-static struct resource colibri_asix_resource[] = {
-	[0] = {
-		.start = PXA3xx_CS2_PHYS,
-		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct platform_device asix_device = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
-	.resource	= colibri_asix_resource,
-	.dev		= {
-		.platform_data = &colibri_asix_platdata
-	}
-};
-
-static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = {
-	GPIO1_nCS2,			/* AX88796 chip select */
-	GPIO26_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
-};
-
-static void __init colibri_pxa300_init_eth(void)
-{
-	colibri_pxa3xx_init_eth(&colibri_asix_platdata);
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
-	platform_device_register(&asix_device);
-}
-#else
-static inline void __init colibri_pxa300_init_eth(void) {}
-#endif /* CONFIG_AX88796 */
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO62_LCD_CS_N,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-	GPIO76_LCD_VSYNC,
-};
-
-static void __init colibri_pxa300_init_lcd(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_lcd_pin_config));
-}
-
-#else
-static inline void colibri_pxa300_init_lcd(void) {}
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-
-#if defined(CONFIG_SND_AC97_CODEC) || defined(CONFIG_SND_AC97_CODEC_MODULE)
-static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
-	GPIO24_AC97_SYSCLK,
-	GPIO23_AC97_nACRESET,
-	GPIO25_AC97_SDATA_IN_0,
-	GPIO27_AC97_SDATA_OUT,
-	GPIO28_AC97_SYNC,
-	GPIO29_AC97_BITCLK
-};
-
-static inline void __init colibri_pxa310_init_ac97(void)
-{
-	/* no AC97 codec on Colibri PXA300 */
-	if (!cpu_is_pxa310())
-		return;
-
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa310_ac97_pin_config));
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void colibri_pxa310_init_ac97(void) {}
-#endif
-
-void __init colibri_pxa300_init(void)
-{
-	colibri_pxa300_init_eth();
-	colibri_pxa3xx_init_nand();
-	colibri_pxa300_init_lcd();
-	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
-	colibri_pxa310_init_ac97();
-
-	/* Evalboard init */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_evalboard_pin_config));
-	colibri_evalboard_init();
-}
-
-MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa300_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
deleted file mode 100644
index 35dd3adb7712..000000000000
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ /dev/null
@@ -1,264 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  arch/arm/mach-pxa/colibri-pxa320.c
- *
- *  Support for Toradex PXA320/310 based Colibri module
- *
- *  Daniel Mack <daniel@caiaq.de>
- *  Matthias Meier <matthias.j.meier@gmx.net>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-types.h>
-#include <linux/sizes.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-
-#include "pxa320.h"
-#include "colibri.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/audio.h>
-#include "pxa27x-udc.h"
-#include "udc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-#ifdef	CONFIG_MACH_COLIBRI_EVALBOARD
-static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO22_MMC1_CLK,
-	GPIO23_MMC1_CMD,
-	GPIO18_MMC1_DAT0,
-	GPIO19_MMC1_DAT1,
-	GPIO20_MMC1_DAT2,
-	GPIO21_MMC1_DAT3,
-	GPIO28_GPIO,	/* SD detect */
-
-	/* UART 1 configuration (may be set by bootloader) */
-	GPIO99_UART1_CTS,
-	GPIO104_UART1_RTS,
-	GPIO97_UART1_RXD,
-	GPIO98_UART1_TXD,
-	GPIO101_UART1_DTR,
-	GPIO103_UART1_DSR,
-	GPIO100_UART1_DCD,
-	GPIO102_UART1_RI,
-
-	/* UART 2 configuration */
-	GPIO109_UART2_CTS,
-	GPIO112_UART2_RTS,
-	GPIO110_UART2_RXD,
-	GPIO111_UART2_TXD,
-
-	/* UART 3 configuration */
-	GPIO30_UART3_RXD,
-	GPIO31_UART3_TXD,
-
-	/* UHC */
-	GPIO2_2_USBH_PEN,
-	GPIO3_2_USBH_PWR,
-
-	/* I2C */
-	GPIO32_I2C_SCL,
-	GPIO33_I2C_SDA,
-
-	/* PCMCIA */
-	MFP_CFG(GPIO59, AF7),	/* PRST ; AF7 to tristate */
-	MFP_CFG(GPIO61, AF7),	/* PCE1 ; AF7 to tristate */
-	MFP_CFG(GPIO60, AF7),	/* PCE2 ; AF7 to tristate */
-	MFP_CFG(GPIO62, AF7),	/* PCD ; AF7 to tristate */
-	MFP_CFG(GPIO56, AF7),	/* PSKTSEL ; AF7 to tristate */
-	GPIO27_GPIO,		/* RDnWR ; input/tristate */
-	GPIO50_GPIO,		/* PREG ; input/tristate */
-	GPIO2_RDY,
-	GPIO5_NPIOR,
-	GPIO6_NPIOW,
-	GPIO7_NPIOS16,
-	GPIO8_NPWAIT,
-	GPIO29_GPIO,		/* PRDY (READY GPIO) */
-	GPIO57_GPIO,		/* PPEN (POWER GPIO) */
-	GPIO81_GPIO,		/* PCD (DETECT GPIO) */
-	GPIO77_GPIO,		/* PRST (RESET GPIO) */
-	GPIO53_GPIO,		/* PBVD1 */
-	GPIO79_GPIO,		/* PBVD2 */
-	GPIO54_GPIO,		/* POE */
-};
-#else
-static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {};
-#endif
-
-#if defined(CONFIG_AX88796)
-#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO36_GPIO)
-/*
- * Asix AX88796 Ethernet
- */
-static struct ax_plat_data colibri_asix_platdata = {
-	.flags		= 0, /* defined later */
-	.wordlength	= 2,
-};
-
-static struct resource colibri_asix_resource[] = {
-	[0] = {
-		.start = PXA3xx_CS2_PHYS,
-		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct platform_device asix_device = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
-	.resource	= colibri_asix_resource,
-	.dev		= {
-		.platform_data = &colibri_asix_platdata
-	}
-};
-
-static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
-	GPIO3_nCS2,			/* AX88796 chip select */
-	GPIO36_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
-};
-
-static void __init colibri_pxa320_init_eth(void)
-{
-	colibri_pxa3xx_init_eth(&colibri_asix_platdata);
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
-	platform_device_register(&asix_device);
-}
-#else
-static inline void __init colibri_pxa320_init_eth(void) {}
-#endif /* CONFIG_AX88796 */
-
-#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", MFP_PIN_GPIO96,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device colibri_pxa320_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-static void colibri_pxa320_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR = UP2OCR_HXOE;
-}
-
-static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = {
-	.udc_command		= colibri_pxa320_udc_command,
-	.gpio_pullup		= -1,
-};
-
-static void __init colibri_pxa320_init_udc(void)
-{
-	pxa_set_udc_info(&colibri_pxa320_udc_info);
-	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
-	platform_device_register(&colibri_pxa320_gpio_vbus);
-}
-#else
-static inline void colibri_pxa320_init_udc(void) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
-	GPIO6_2_LCD_LDD_0,
-	GPIO7_2_LCD_LDD_1,
-	GPIO8_2_LCD_LDD_2,
-	GPIO9_2_LCD_LDD_3,
-	GPIO10_2_LCD_LDD_4,
-	GPIO11_2_LCD_LDD_5,
-	GPIO12_2_LCD_LDD_6,
-	GPIO13_2_LCD_LDD_7,
-	GPIO63_LCD_LDD_8,
-	GPIO64_LCD_LDD_9,
-	GPIO65_LCD_LDD_10,
-	GPIO66_LCD_LDD_11,
-	GPIO67_LCD_LDD_12,
-	GPIO68_LCD_LDD_13,
-	GPIO69_LCD_LDD_14,
-	GPIO70_LCD_LDD_15,
-	GPIO71_LCD_LDD_16,
-	GPIO72_LCD_LDD_17,
-	GPIO73_LCD_CS_N,
-	GPIO74_LCD_VSYNC,
-	GPIO14_2_LCD_FCLK,
-	GPIO15_2_LCD_LCLK,
-	GPIO16_2_LCD_PCLK,
-	GPIO17_2_LCD_BIAS,
-};
-
-static void __init colibri_pxa320_init_lcd(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_lcd_pin_config));
-}
-#else
-static inline void colibri_pxa320_init_lcd(void) {}
-#endif
-
-#if	defined(CONFIG_SND_AC97_CODEC) || \
-	defined(CONFIG_SND_AC97_CODEC_MODULE)
-static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
-	GPIO34_AC97_SYSCLK,
-	GPIO35_AC97_SDATA_IN_0,
-	GPIO37_AC97_SDATA_OUT,
-	GPIO38_AC97_SYNC,
-	GPIO39_AC97_BITCLK,
-	GPIO40_AC97_nACRESET
-};
-
-static inline void __init colibri_pxa320_init_ac97(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_ac97_pin_config));
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void colibri_pxa320_init_ac97(void) {}
-#endif
-
-void __init colibri_pxa320_init(void)
-{
-	colibri_pxa320_init_eth();
-	colibri_pxa3xx_init_nand();
-	colibri_pxa320_init_lcd();
-	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
-	colibri_pxa320_init_ac97();
-	colibri_pxa320_init_udc();
-
-	/* Evalboard init */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config));
-	colibri_evalboard_init();
-}
-
-MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa320_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
deleted file mode 100644
index 3cead80a2b37..000000000000
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  arch/arm/mach-pxa/colibri-pxa3xx.c
- *
- *  Common functions for all Toradex PXA3xx modules
- *
- *  Daniel Mack <daniel@caiaq.de>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/etherdevice.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <linux/sizes.h>
-#include <asm/system_info.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/pxa3xx-regs.h>
-#include "mfp-pxa300.h"
-#include "colibri.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-
-#include "generic.h"
-#include "devices.h"
-
-#if defined(CONFIG_AX88796)
-#define ETHER_ADDR_LEN 6
-static u8 ether_mac_addr[ETHER_ADDR_LEN];
-
-void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data)
-{
-	int i;
-	u64 serial = ((u64) system_serial_high << 32) | system_serial_low;
-
-	/*
-	 * If the bootloader passed in a serial boot tag, which contains a
-	 * valid ethernet MAC, pass it to the interface. Toradex ships the
-	 * modules with their own bootloader which provides a valid MAC
-	 * this way.
-	 */
-
-	for (i = 0; i < ETHER_ADDR_LEN; i++) {
-		ether_mac_addr[i] = serial & 0xff;
-		serial >>= 8;
-	}
-
-	if (is_valid_ether_addr(ether_mac_addr)) {
-		plat_data->flags |= AXFLG_MAC_FROMPLATFORM;
-		plat_data->mac_addr = ether_mac_addr;
-		printk(KERN_INFO "%s(): taking MAC from serial boot tag\n",
-			__func__);
-	} else {
-		plat_data->flags |= AXFLG_MAC_FROMDEV;
-		printk(KERN_INFO "%s(): no valid serial boot tag found, "
-			"taking MAC from device\n", __func__);
-	}
-}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static int lcd_bl_pin;
-
-/*
- * LCD panel (Sharp LQ043T3DX02)
- */
-static void colibri_lcd_backlight(int on)
-{
-	gpio_set_value(lcd_bl_pin, !!on);
-}
-
-static struct pxafb_mode_info sharp_lq43_mode = {
-	.pixclock	= 101936,
-	.xres		= 480,
-	.yres		= 272,
-	.bpp		= 32,
-	.depth		= 18,
-	.hsync_len      = 41,
-	.left_margin    = 2,
-	.right_margin   = 2,
-	.vsync_len      = 10,
-	.upper_margin   = 2,
-	.lower_margin   = 2,
-	.sync	   	= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info sharp_lq43_info = {
-	.modes		= &sharp_lq43_mode,
-	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lcd_conn	= LCD_COLOR_TFT_18BPP,
-	.pxafb_backlight_power = colibri_lcd_backlight,
-};
-
-void __init colibri_pxa3xx_init_lcd(int bl_pin)
-{
-	lcd_bl_pin = bl_pin;
-	gpio_request(bl_pin, "lcd backlight");
-	gpio_direction_output(bl_pin, 0);
-	pxa_set_fb_info(NULL, &sharp_lq43_info);
-}
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-static struct mtd_partition colibri_nand_partitions[] = {
-	{
-		.name        = "bootloader",
-		.offset      = 0,
-		.size        = SZ_512K,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name        = "kernel",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_4M,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name        = "reserved",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_1M,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name        = "fs",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct pxa3xx_nand_platform_data colibri_nand_info = {
-	.keep_config	= 1,
-	.parts		= colibri_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(colibri_nand_partitions),
-};
-
-void __init colibri_pxa3xx_init_nand(void)
-{
-	pxa3xx_set_nand_info(&colibri_nand_info);
-}
-#endif
-
diff --git a/arch/arm/mach-pxa/colibri.h b/arch/arm/mach-pxa/colibri.h
deleted file mode 100644
index 85525d49e321..000000000000
--- a/arch/arm/mach-pxa/colibri.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _COLIBRI_H_
-#define _COLIBRI_H_
-
-#include <net/ax88796.h>
-#include <mach/mfp.h>
-
-/*
- * base board glue for PXA270 module
- */
-
-enum {
-	COLIBRI_EVALBOARD = 0,
-	COLIBRI_PXA270_INCOME,
-};
-
-#if defined(CONFIG_MACH_COLIBRI_EVALBOARD)
-extern void colibri_evalboard_init(void);
-#else
-static inline void colibri_evalboard_init(void) {}
-#endif
-
-#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
-extern void colibri_pxa270_income_boardinit(void);
-#else
-static inline void colibri_pxa270_income_boardinit(void) {}
-#endif
-
-/*
- * common settings for all modules
- */
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
-#else
-static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-extern void colibri_pxa3xx_init_lcd(int bl_pin);
-#else
-static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
-#endif
-
-#if defined(CONFIG_AX88796)
-extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-extern void colibri_pxa3xx_init_nand(void);
-#else
-static inline void colibri_pxa3xx_init_nand(void) {}
-#endif
-
-/* physical memory regions */
-#define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
-
-/* GPIO definitions for Colibri PXA270 */
-#define GPIO114_COLIBRI_PXA270_ETH_IRQ	114
-#define GPIO0_COLIBRI_PXA270_SD_DETECT	0
-#define GPIO113_COLIBRI_PXA270_TS_IRQ	113
-
-/* GPIO definitions for Colibri PXA300/310 */
-#define GPIO13_COLIBRI_PXA300_SD_DETECT	13
-
-/* GPIO definitions for Colibri PXA320 */
-#define GPIO28_COLIBRI_PXA320_SD_DETECT	28
-
-#endif /* _COLIBRI_H_ */
-
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
deleted file mode 100644
index 593c7f793da5..000000000000
--- a/arch/arm/mach-pxa/corgi.c
+++ /dev/null
@@ -1,811 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support for Sharp SL-C7xx PDAs
- * Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches/lubbock.c
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>	/* symbol_get ; symbol_put */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pm.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/backlight.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/io.h>
-#include <linux/regulator/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/corgi_lcd.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mtd/sharpsl.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/gpio_keys.h>
-#include <linux/memblock.h>
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "pxa25x.h"
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include <mach/corgi.h>
-#include "sharpsl_pm.h"
-
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/scoop.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long corgi_pin_config[] __initdata = {
-	/* Static Memory I/O */
-	GPIO78_nCS_2,	/* w100fb */
-	GPIO80_nCS_4,	/* scoop */
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO24_GPIO,	/* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
-
-	/* Infra-Red */
-	GPIO47_FICP_TXD,
-	GPIO46_FICP_RXD,
-
-	/* FFUART */
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-	GPIO39_FFUART_TXD,
-	GPIO37_FFUART_DSR,
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* GPIO Matrix Keypad */
-	GPIO66_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 0 */
-	GPIO67_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 1 */
-	GPIO68_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 2 */
-	GPIO69_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 3 */
-	GPIO70_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 4 */
-	GPIO71_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 5 */
-	GPIO72_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 6 */
-	GPIO73_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 7 */
-	GPIO74_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 8 */
-	GPIO75_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 9 */
-	GPIO76_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 10 */
-	GPIO77_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 11 */
-	GPIO58_GPIO,	/* row 0 */
-	GPIO59_GPIO,	/* row 1 */
-	GPIO60_GPIO,	/* row 2 */
-	GPIO61_GPIO,	/* row 3 */
-	GPIO62_GPIO,	/* row 4 */
-	GPIO63_GPIO,	/* row 5 */
-	GPIO64_GPIO,	/* row 6 */
-	GPIO65_GPIO,	/* row 7 */
-
-	/* GPIO */
-	GPIO9_GPIO,				/* CORGI_GPIO_nSD_DETECT */
-	GPIO7_GPIO,				/* CORGI_GPIO_nSD_WP */
-	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */
-	GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_LED_ORANGE */
-	GPIO21_GPIO,				/* CORGI_GPIO_ADC_TEMP */
-	GPIO22_GPIO,				/* CORGI_GPIO_IR_ON */
-	GPIO33_GPIO,				/* CORGI_GPIO_SD_PWR */
-	GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_CHRG_ON */
-	GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_CHRG_UKN */
-	GPIO44_GPIO,				/* CORGI_GPIO_HSYNC */
-
-	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_KEY_INT */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* CORGI_GPIO_AC_IN */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_WAKEUP */
-};
-
-/*
- * Corgi SCOOP Device
- */
-static struct resource corgi_scoop_resources[] = {
-	[0] = {
-		.start		= 0x10800000,
-		.end		= 0x10800fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config corgi_scoop_setup = {
-	.io_dir 	= CORGI_SCOOP_IO_DIR,
-	.io_out		= CORGI_SCOOP_IO_OUT,
-	.gpio_base	= CORGI_SCOOP_GPIO_BASE,
-};
-
-struct platform_device corgiscoop_device = {
-	.name		= "sharp-scoop",
-	.id		= -1,
-	.dev		= {
- 		.platform_data	= &corgi_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(corgi_scoop_resources),
-	.resource	= corgi_scoop_resources,
-};
-
-static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
-{
-	.dev        = &corgiscoop_device.dev,
-	.irq        = CORGI_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = CORGI_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},
-};
-
-static struct scoop_pcmcia_config corgi_pcmcia_config = {
-	.devs         = &corgi_pcmcia_scoop[0],
-	.num_devs     = 1,
-};
-
-static struct w100_mem_info corgi_fb_mem = {
-	.ext_cntl          = 0x00040003,
-	.sdram_mode_reg    = 0x00650021,
-	.ext_timing_cntl   = 0x10002a4a,
-	.io_cntl           = 0x7ff87012,
-	.size              = 0x1fffff,
-};
-
-static struct w100_gen_regs corgi_fb_regs = {
-	.lcd_format    = 0x00000003,
-	.lcdd_cntl1    = 0x01CC0000,
-	.lcdd_cntl2    = 0x0003FFFF,
-	.genlcd_cntl1  = 0x00FFFF0D,
-	.genlcd_cntl2  = 0x003F3003,
-	.genlcd_cntl3  = 0x000102aa,
-};
-
-static struct w100_gpio_regs corgi_fb_gpio = {
-	.init_data1   = 0x000000bf,
-	.init_data2   = 0x00000000,
-	.gpio_dir1    = 0x00000000,
-	.gpio_oe1     = 0x03c0feff,
-	.gpio_dir2    = 0x00000000,
-	.gpio_oe2     = 0x00000000,
-};
-
-static struct w100_mode corgi_fb_modes[] = {
-{
-	.xres            = 480,
-	.yres            = 640,
-	.left_margin     = 0x56,
-	.right_margin    = 0x55,
-	.upper_margin    = 0x03,
-	.lower_margin    = 0x00,
-	.crtc_ss         = 0x82360056,
-	.crtc_ls         = 0xA0280000,
-	.crtc_gs         = 0x80280028,
-	.crtc_vpos_gs    = 0x02830002,
-	.crtc_rev        = 0x00400008,
-	.crtc_dclk       = 0xA0000000,
-	.crtc_gclk       = 0x8015010F,
-	.crtc_goe        = 0x80100110,
-	.crtc_ps1_active = 0x41060010,
-	.pll_freq        = 75,
-	.fast_pll_freq   = 100,
-	.sysclk_src      = CLK_SRC_PLL,
-	.sysclk_divider  = 0,
-	.pixclk_src      = CLK_SRC_PLL,
-	.pixclk_divider  = 2,
-	.pixclk_divider_rotated = 6,
-},{
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 0x27,
-	.right_margin    = 0x2e,
-	.upper_margin    = 0x01,
-	.lower_margin    = 0x00,
-	.crtc_ss         = 0x81170027,
-	.crtc_ls         = 0xA0140000,
-	.crtc_gs         = 0xC0140014,
-	.crtc_vpos_gs    = 0x00010141,
-	.crtc_rev        = 0x00400008,
-	.crtc_dclk       = 0xA0000000,
-	.crtc_gclk       = 0x8015010F,
-	.crtc_goe        = 0x80100110,
-	.crtc_ps1_active = 0x41060010,
-	.pll_freq        = 0,
-	.fast_pll_freq   = 0,
-	.sysclk_src      = CLK_SRC_XTAL,
-	.sysclk_divider  = 0,
-	.pixclk_src      = CLK_SRC_XTAL,
-	.pixclk_divider  = 1,
-	.pixclk_divider_rotated = 1,
-},
-
-};
-
-static struct w100fb_mach_info corgi_fb_info = {
-	.init_mode  = INIT_MODE_ROTATED,
-	.mem        = &corgi_fb_mem,
-	.regs       = &corgi_fb_regs,
-	.modelist   = &corgi_fb_modes[0],
-	.num_modes  = 2,
-	.gpio       = &corgi_fb_gpio,
-	.xtal_freq  = 12500000,
-	.xtal_dbl   = 0,
-};
-
-static struct resource corgi_fb_resources[] = {
-	[0] = {
-		.start   = 0x08000000,
-		.end     = 0x08ffffff,
-		.flags   = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device corgifb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.num_resources	= ARRAY_SIZE(corgi_fb_resources),
-	.resource	= corgi_fb_resources,
-	.dev            = {
-		.platform_data = &corgi_fb_info,
-	},
-
-};
-
-/*
- * Corgi Keyboard Device
- */
-#define CORGI_KEY_CALENDER	KEY_F1
-#define CORGI_KEY_ADDRESS	KEY_F2
-#define CORGI_KEY_FN		KEY_F3
-#define CORGI_KEY_CANCEL	KEY_F4
-#define CORGI_KEY_OFF		KEY_SUSPEND
-#define CORGI_KEY_EXOK		KEY_F5
-#define CORGI_KEY_EXCANCEL	KEY_F6
-#define CORGI_KEY_EXJOGDOWN	KEY_F7
-#define CORGI_KEY_EXJOGUP	KEY_F8
-#define CORGI_KEY_JAP1		KEY_LEFTCTRL
-#define CORGI_KEY_JAP2		KEY_LEFTALT
-#define CORGI_KEY_MAIL		KEY_F10
-#define CORGI_KEY_OK		KEY_F11
-#define CORGI_KEY_MENU		KEY_F12
-
-static const uint32_t corgikbd_keymap[] = {
-	KEY(0, 1, KEY_1),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_5),
-	KEY(0, 4, KEY_6),
-	KEY(0, 5, KEY_7),
-	KEY(0, 6, KEY_9),
-	KEY(0, 7, KEY_0),
-	KEY(0, 8, KEY_BACKSPACE),
-	KEY(1, 1, KEY_2),
-	KEY(1, 2, KEY_4),
-	KEY(1, 3, KEY_R),
-	KEY(1, 4, KEY_Y),
-	KEY(1, 5, KEY_8),
-	KEY(1, 6, KEY_I),
-	KEY(1, 7, KEY_O),
-	KEY(1, 8, KEY_P),
-	KEY(2, 0, KEY_TAB),
-	KEY(2, 1, KEY_Q),
-	KEY(2, 2, KEY_E),
-	KEY(2, 3, KEY_T),
-	KEY(2, 4, KEY_G),
-	KEY(2, 5, KEY_U),
-	KEY(2, 6, KEY_J),
-	KEY(2, 7, KEY_K),
-	KEY(3, 0, CORGI_KEY_CALENDER),
-	KEY(3, 1, KEY_W),
-	KEY(3, 2, KEY_S),
-	KEY(3, 3, KEY_F),
-	KEY(3, 4, KEY_V),
-	KEY(3, 5, KEY_H),
-	KEY(3, 6, KEY_M),
-	KEY(3, 7, KEY_L),
-	KEY(3, 9, KEY_RIGHTSHIFT),
-	KEY(4, 0, CORGI_KEY_ADDRESS),
-	KEY(4, 1, KEY_A),
-	KEY(4, 2, KEY_D),
-	KEY(4, 3, KEY_C),
-	KEY(4, 4, KEY_B),
-	KEY(4, 5, KEY_N),
-	KEY(4, 6, KEY_DOT),
-	KEY(4, 8, KEY_ENTER),
-	KEY(4, 10, KEY_LEFTSHIFT),
-	KEY(5, 0, CORGI_KEY_MAIL),
-	KEY(5, 1, KEY_Z),
-	KEY(5, 2, KEY_X),
-	KEY(5, 3, KEY_MINUS),
-	KEY(5, 4, KEY_SPACE),
-	KEY(5, 5, KEY_COMMA),
-	KEY(5, 7, KEY_UP),
-	KEY(5, 11, CORGI_KEY_FN),
-	KEY(6, 0, KEY_SYSRQ),
-	KEY(6, 1, CORGI_KEY_JAP1),
-	KEY(6, 2, CORGI_KEY_JAP2),
-	KEY(6, 3, CORGI_KEY_CANCEL),
-	KEY(6, 4, CORGI_KEY_OK),
-	KEY(6, 5, CORGI_KEY_MENU),
-	KEY(6, 6, KEY_LEFT),
-	KEY(6, 7, KEY_DOWN),
-	KEY(6, 8, KEY_RIGHT),
-	KEY(7, 0, CORGI_KEY_OFF),
-	KEY(7, 1, CORGI_KEY_EXOK),
-	KEY(7, 2, CORGI_KEY_EXCANCEL),
-	KEY(7, 3, CORGI_KEY_EXJOGDOWN),
-	KEY(7, 4, CORGI_KEY_EXJOGUP),
-};
-
-static struct matrix_keymap_data corgikbd_keymap_data = {
-	.keymap		= corgikbd_keymap,
-	.keymap_size	= ARRAY_SIZE(corgikbd_keymap),
-};
-
-static const int corgikbd_row_gpios[] =
-		{ 58, 59, 60, 61, 62, 63, 64, 65 };
-static const int corgikbd_col_gpios[] =
-		{ 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
-
-static struct matrix_keypad_platform_data corgikbd_pdata = {
-	.keymap_data		= &corgikbd_keymap_data,
-	.row_gpios		= corgikbd_row_gpios,
-	.col_gpios		= corgikbd_col_gpios,
-	.num_row_gpios		= ARRAY_SIZE(corgikbd_row_gpios),
-	.num_col_gpios		= ARRAY_SIZE(corgikbd_col_gpios),
-	.col_scan_delay_us	= 10,
-	.debounce_ms		= 10,
-	.wakeup			= 1,
-};
-
-static struct platform_device corgikbd_device = {
-	.name		= "matrix-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &corgikbd_pdata,
-	},
-};
-
-static struct gpio_keys_button corgi_gpio_keys[] = {
-	{
-		.type	= EV_SW,
-		.code	= SW_LID,
-		.gpio	= CORGI_GPIO_SWA,
-		.desc	= "Lid close switch",
-		.debounce_interval = 500,
-	},
-	{
-		.type	= EV_SW,
-		.code	= SW_TABLET_MODE,
-		.gpio	= CORGI_GPIO_SWB,
-		.desc	= "Tablet mode switch",
-		.debounce_interval = 500,
-	},
-	{
-		.type	= EV_SW,
-		.code	= SW_HEADPHONE_INSERT,
-		.gpio	= CORGI_GPIO_AK_INT,
-		.desc	= "HeadPhone insert",
-		.debounce_interval = 500,
-	},
-};
-
-static struct gpio_keys_platform_data corgi_gpio_keys_platform_data = {
-	.buttons	= corgi_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(corgi_gpio_keys),
-	.poll_interval	= 250,
-};
-
-static struct platform_device corgi_gpio_keys_device = {
-	.name	= "gpio-keys-polled",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &corgi_gpio_keys_platform_data,
-	},
-};
-
-/*
- * Corgi LEDs
- */
-static struct gpio_led corgi_gpio_leds[] = {
-	{
-		.name			= "corgi:amber:charge",
-		.default_trigger	= "sharpsl-charge",
-		.gpio			= CORGI_GPIO_LED_ORANGE,
-	},
-	{
-		.name			= "corgi:green:mail",
-		.default_trigger	= "nand-disk",
-		.gpio			= CORGI_GPIO_LED_GREEN,
-	},
-};
-
-static struct gpio_led_platform_data corgi_gpio_leds_info = {
-	.leds		= corgi_gpio_leds,
-	.num_leds	= ARRAY_SIZE(corgi_gpio_leds),
-};
-
-static struct platform_device corgiled_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &corgi_gpio_leds_info,
-	},
-};
-
-/*
- * Corgi Audio
- */
-static struct platform_device corgi_audio_device = {
-	.name	= "corgi-audio",
-	.id	= -1,
-};
-
-/*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-static struct pxamci_platform_data corgi_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table corgi_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 9 */
-		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_nSD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 7 */
-		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_nSD_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		/* Power on GPIO 33 */
-		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_SD_PWR,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/*
- * Irda
- */
-static struct pxaficp_platform_data corgi_ficp_platform_data = {
-	.gpio_pwdown		= CORGI_GPIO_IR_ON,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-
-/*
- * USB Device Controller
- */
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	/* no connect GPIO; corgi can't tell connection status */
-	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
-};
-
-#if IS_ENABLED(CONFIG_SPI_PXA2XX)
-static struct pxa2xx_spi_controller corgi_spi_info = {
-	.num_chipselect	= 3,
-};
-
-static void corgi_wait_for_hsync(void)
-{
-	while (gpio_get_value(CORGI_GPIO_HSYNC))
-		cpu_relax();
-
-	while (!gpio_get_value(CORGI_GPIO_HSYNC))
-		cpu_relax();
-}
-
-static struct ads7846_platform_data corgi_ads7846_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.gpio_pendown		= CORGI_GPIO_TP_INT,
-	.wait_for_sync		= corgi_wait_for_hsync,
-};
-
-static struct pxa2xx_spi_chip corgi_ads7846_chip = {
-	.gpio_cs	= CORGI_GPIO_ADS7846_CS,
-};
-
-static void corgi_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
-static struct gpiod_lookup_table corgi_lcdcon_gpio_table = {
-	.dev_id = "spi1.1",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct corgi_lcd_platform_data corgi_lcdcon_info = {
-	.init_mode		= CORGI_LCD_MODE_VGA,
-	.max_intensity		= 0x2f,
-	.default_intensity	= 0x1f,
-	.limit_mask		= 0x0b,
-	.kick_battery		= corgi_bl_kick_battery,
-};
-
-static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
-	.gpio_cs	= CORGI_GPIO_LCDCON_CS,
-};
-
-static struct pxa2xx_spi_chip corgi_max1111_chip = {
-	.gpio_cs	= CORGI_GPIO_MAX1111_CS,
-};
-
-static struct spi_board_info corgi_spi_devices[] = {
-	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 1200000,
-		.bus_num	= 1,
-		.chip_select	= 0,
-		.platform_data	= &corgi_ads7846_info,
-		.controller_data= &corgi_ads7846_chip,
-		.irq		= PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT),
-	}, {
-		.modalias	= "corgi-lcd",
-		.max_speed_hz	= 50000,
-		.bus_num	= 1,
-		.chip_select	= 1,
-		.platform_data	= &corgi_lcdcon_info,
-		.controller_data= &corgi_lcdcon_chip,
-	}, {
-		.modalias	= "max1111",
-		.max_speed_hz	= 450000,
-		.bus_num	= 1,
-		.chip_select	= 2,
-		.controller_data= &corgi_max1111_chip,
-	},
-};
-
-static void __init corgi_init_spi(void)
-{
-	pxa2xx_set_spi_info(1, &corgi_spi_info);
-	gpiod_add_lookup_table(&corgi_lcdcon_gpio_table);
-	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
-}
-#else
-static inline void corgi_init_spi(void) {}
-#endif
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr sharpsl_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static const char * const probes[] = {
-	"cmdlinepart",
-	"ofpart",
-	"sharpslpart",
-	NULL,
-};
-
-static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
-	.badblock_pattern	= &sharpsl_bbt,
-	.part_parsers		= probes,
-};
-
-static struct resource sharpsl_nand_resources[] = {
-	{
-		.start	= 0x0C000000,
-		.end	= 0x0C000FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_nand_device = {
-	.name		= "sharpsl-nand",
-	.id		= -1,
-	.resource	= sharpsl_nand_resources,
-	.num_resources	= ARRAY_SIZE(sharpsl_nand_resources),
-	.dev.platform_data	= &sharpsl_nand_platform_data,
-};
-
-static struct mtd_partition sharpsl_rom_parts[] = {
-	{
-		.name	="Boot PROM Filesystem",
-		.offset	= 0x00120000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data sharpsl_rom_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
-};
-
-static struct resource sharpsl_rom_resources[] = {
-	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&corgiscoop_device,
-	&corgifb_device,
-	&corgi_gpio_keys_device,
-	&corgikbd_device,
-	&corgiled_device,
-	&corgi_audio_device,
-	&sharpsl_nand_device,
-	&sharpsl_rom_device,
-};
-
-static struct i2c_board_info __initdata corgi_i2c_devices[] = {
-	{ I2C_BOARD_INFO("wm8731", 0x1b) },
-};
-
-static void corgi_poweroff(void)
-{
-	if (!machine_is_corgi())
-		/* Green LED off tells the bootloader to halt */
-		gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
-
-	pxa_restart(REBOOT_HARD, NULL);
-}
-
-static void corgi_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (!machine_is_corgi())
-		/* Green LED on tells the bootloader to reboot */
-		gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
-
-	pxa_restart(REBOOT_HARD, cmd);
-}
-
-static void __init corgi_init(void)
-{
-	pm_power_off = corgi_poweroff;
-
-	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
-	PCFR |= PCFR_OPDE;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
-
-	/* allow wakeup from various GPIOs */
-	gpio_set_wake(CORGI_GPIO_KEY_INT, 1);
-	gpio_set_wake(CORGI_GPIO_WAKEUP, 1);
-	gpio_set_wake(CORGI_GPIO_AC_IN, 1);
-	gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1);
-
-	if (!machine_is_corgi())
-		gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1);
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	corgi_init_spi();
-
- 	pxa_set_udc_info(&udc_info);
-	gpiod_add_lookup_table(&corgi_mci_gpio_table);
-	pxa_set_mci_info(&corgi_mci_platform_data);
-	pxa_set_ficp_info(&corgi_ficp_platform_data);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));
-
-	platform_scoop_config = &corgi_pcmcia_config;
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	regulator_has_full_constraints();
-}
-
-static void __init fixup_corgi(struct tag *tags, char **cmdline)
-{
-	sharpsl_save_param();
-	if (machine_is_corgi())
-		memblock_add(0xa0000000, SZ_32M);
-	else
-		memblock_add(0xa0000000, SZ_64M);
-}
-
-#ifdef CONFIG_MACH_CORGI
-MACHINE_START(CORGI, "SHARP Corgi")
-	.fixup		= fixup_corgi,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= corgi_init,
-	.init_time	= pxa_timer_init,
-	.restart	= corgi_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_SHEPHERD
-MACHINE_START(SHEPHERD, "SHARP Shepherd")
-	.fixup		= fixup_corgi,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= corgi_init,
-	.init_time	= pxa_timer_init,
-	.restart	= corgi_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_HUSKY
-MACHINE_START(HUSKY, "SHARP Husky")
-	.fixup		= fixup_corgi,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= corgi_init,
-	.init_time	= pxa_timer_init,
-	.restart	= corgi_restart,
-MACHINE_END
-#endif
-
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
deleted file mode 100644
index 092dcb9fced5..000000000000
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ /dev/null
@@ -1,222 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Battery and Power Management code for the Sharp SL-C7xx
- *
- * Copyright (c) 2005 Richard Purdie
- */
-
-#include <linux/module.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/apm-emulation.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <mach/corgi.h>
-#include <mach/pxa2xx-regs.h>
-#include "sharpsl_pm.h"
-
-#include "generic.h"
-
-#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
-#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
-#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */
-#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */
-#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
-#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
-
-static struct gpio charger_gpios[] = {
-	{ CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
-	{ CORGI_GPIO_CHRG_ON,	  GPIOF_OUT_INIT_LOW, "Charger On" },
-	{ CORGI_GPIO_CHRG_UKN,	  GPIOF_OUT_INIT_LOW, "Charger Unknown" },
-	{ CORGI_GPIO_AC_IN,	  GPIOF_IN, "Charger Detection" },
-	{ CORGI_GPIO_KEY_INT,	  GPIOF_IN, "Key Interrupt" },
-	{ CORGI_GPIO_WAKEUP,	  GPIOF_IN, "System wakeup notification" },
-};
-
-static void corgi_charger_init(void)
-{
-	gpio_request_array(ARRAY_AND_SIZE(charger_gpios));
-}
-
-static void corgi_measure_temp(int on)
-{
-	gpio_set_value(CORGI_GPIO_ADC_TEMP_ON, on);
-}
-
-static void corgi_charge(int on)
-{
-	if (on) {
-		if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) {
-			gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
-			gpio_set_value(CORGI_GPIO_CHRG_UKN, 1);
-		} else {
-			gpio_set_value(CORGI_GPIO_CHRG_ON, 1);
-			gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
-		}
-	} else {
-		gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
-		gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
-	}
-}
-
-static void corgi_discharge(int on)
-{
-	gpio_set_value(CORGI_GPIO_DISCHARGE_ON, on);
-}
-
-static void corgi_presuspend(void)
-{
-}
-
-static void corgi_postsuspend(void)
-{
-}
-
-/*
- * Check what brought us out of the suspend.
- * Return: 0 to sleep, otherwise wake
- */
-static int corgi_should_wakeup(unsigned int resume_on_alarm)
-{
-	int is_resume = 0;
-
-	dev_dbg(sharpsl_pm.dev, "PEDR = %x, GPIO_AC_IN = %d, "
-		"GPIO_CHRG_FULL = %d, GPIO_KEY_INT = %d, GPIO_WAKEUP = %d\n",
-		PEDR, gpio_get_value(CORGI_GPIO_AC_IN),
-		gpio_get_value(CORGI_GPIO_CHRG_FULL),
-		gpio_get_value(CORGI_GPIO_KEY_INT),
-		gpio_get_value(CORGI_GPIO_WAKEUP));
-
-	if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) {
-		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-			/* charge on */
-			dev_dbg(sharpsl_pm.dev, "ac insert\n");
-			sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
-		} else {
-			/* charge off */
-			dev_dbg(sharpsl_pm.dev, "ac remove\n");
-			sharpsl_pm_led(SHARPSL_LED_OFF);
-			sharpsl_pm.machinfo->charge(0);
-			sharpsl_pm.charge_mode = CHRG_OFF;
-		}
-	}
-
-	if ((PEDR & GPIO_bit(CORGI_GPIO_CHRG_FULL)))
-		dev_dbg(sharpsl_pm.dev, "Charge full interrupt\n");
-
-	if (PEDR & GPIO_bit(CORGI_GPIO_KEY_INT))
-		is_resume |= GPIO_bit(CORGI_GPIO_KEY_INT);
-
-	if (PEDR & GPIO_bit(CORGI_GPIO_WAKEUP))
-		is_resume |= GPIO_bit(CORGI_GPIO_WAKEUP);
-
-	if (resume_on_alarm && (PEDR & PWER_RTC))
-		is_resume |= PWER_RTC;
-
-	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
-	return is_resume;
-}
-
-static bool corgi_charger_wakeup(void)
-{
-	return !gpio_get_value(CORGI_GPIO_AC_IN) ||
-		!gpio_get_value(CORGI_GPIO_KEY_INT) ||
-		!gpio_get_value(CORGI_GPIO_WAKEUP);
-}
-
-unsigned long corgipm_read_devdata(int type)
-{
-	switch(type) {
-	case SHARPSL_STATUS_ACIN:
-		return !gpio_get_value(CORGI_GPIO_AC_IN);
-	case SHARPSL_STATUS_LOCK:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
-	case SHARPSL_STATUS_CHRGFULL:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
-	case SHARPSL_STATUS_FATAL:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
-	case SHARPSL_ACIN_VOLT:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
-	case SHARPSL_BATT_TEMP:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP);
-	case SHARPSL_BATT_VOLT:
-	default:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT);
-	}
-}
-
-static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
-	.init            = corgi_charger_init,
-	.exit            = NULL,
-	.gpio_batlock    = CORGI_GPIO_BAT_COVER,
-	.gpio_acin       = CORGI_GPIO_AC_IN,
-	.gpio_batfull    = CORGI_GPIO_CHRG_FULL,
-	.discharge       = corgi_discharge,
-	.charge          = corgi_charge,
-	.measure_temp    = corgi_measure_temp,
-	.presuspend      = corgi_presuspend,
-	.postsuspend     = corgi_postsuspend,
-	.read_devdata    = corgipm_read_devdata,
-	.charger_wakeup  = corgi_charger_wakeup,
-	.should_wakeup   = corgi_should_wakeup,
-#if defined(CONFIG_LCD_CORGI)
-	.backlight_limit = corgi_lcd_limit_intensity,
-#endif
-	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
-	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
-	.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
-	.charge_acin_low  = SHARPSL_CHARGE_ON_ACIN_LOW,
-	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
-	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
-	.bat_levels       = 40,
-	.bat_levels_noac  = sharpsl_battery_levels_noac,
-	.bat_levels_acin  = sharpsl_battery_levels_acin,
-	.status_high_acin = 188,
-	.status_low_acin  = 178,
-	.status_high_noac = 185,
-	.status_low_noac  = 175,
-};
-
-static struct platform_device *corgipm_device;
-
-static int corgipm_init(void)
-{
-	int ret;
-
-	if (!machine_is_corgi() && !machine_is_shepherd()
-			&& !machine_is_husky())
-		return -ENODEV;
-
-	corgipm_device = platform_device_alloc("sharpsl-pm", -1);
-	if (!corgipm_device)
-		return -ENOMEM;
-
-	if (!machine_is_corgi())
-	    corgi_pm_machinfo.batfull_irq = 1;
-
-	corgipm_device->dev.platform_data = &corgi_pm_machinfo;
-	ret = platform_device_add(corgipm_device);
-
-	if (ret)
-		platform_device_put(corgipm_device);
-
-	return ret;
-}
-
-static void corgipm_exit(void)
-{
-	platform_device_unregister(corgipm_device);
-}
-
-module_init(corgipm_init);
-module_exit(corgipm_exit);
diff --git a/arch/arm/mach-pxa/csb701.c b/arch/arm/mach-pxa/csb701.c
deleted file mode 100644
index 527c9fdf9795..000000000000
--- a/arch/arm/mach-pxa/csb701.c
+++ /dev/null
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-
-static struct gpio_keys_button csb701_buttons[] = {
-	{
-		.code	= 0x7,
-		.gpio	= 1,
-		.active_low = 1,
-		.desc	= "SW2",
-		.type	= EV_SW,
-		.wakeup = 1,
-	},
-};
-
-static struct gpio_keys_platform_data csb701_gpio_keys_data = {
-	.buttons = csb701_buttons,
-	.nbuttons = ARRAY_SIZE(csb701_buttons),
-};
-
-static struct gpio_led csb701_leds[] = {
-	{
-		.name	= "csb701:yellow:heartbeat",
-		.default_trigger = "heartbeat",
-		.gpio	= 11,
-		.active_low = 1,
-	},
-};
-
-static struct platform_device csb701_gpio_keys = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev.platform_data = &csb701_gpio_keys_data,
-};
-
-static struct gpio_led_platform_data csb701_leds_gpio_data = {
-	.leds		= csb701_leds,
-	.num_leds	= ARRAY_SIZE(csb701_leds),
-};
-
-static struct platform_device csb701_leds_gpio = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev.platform_data = &csb701_leds_gpio_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&csb701_gpio_keys,
-	&csb701_leds_gpio,
-};
-
-static int __init csb701_init(void)
-{
-	if (!machine_is_csb726())
-		return -ENODEV;
-
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-module_init(csb701_init);
-
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
deleted file mode 100644
index 98fcdc6e2944..000000000000
--- a/arch/arm/mach-pxa/csb726.c
+++ /dev/null
@@ -1,290 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Support for Cogent CSB726
- *
- *  Copyright (c) 2008 Dmitry Eremin-Solenikov
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/sm501.h>
-#include <linux/smsc911x.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "csb726.h"
-#include "pxa27x.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/audio.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/*
- * n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89,
- * nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116,
- * XXX: 21,
- * XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3
- * XXX: 33 CS_5 for LAN9215 on R1
- */
-
-static unsigned long csb726_pin_config[] = {
-	GPIO78_nCS_2, /* EXP_CS */
-	GPIO79_nCS_3, /* SMSC9215 */
-	GPIO80_nCS_4, /* SM501 */
-
-	GPIO52_GPIO, /* #SMSC9251 int */
-	GPIO53_GPIO, /* SM501 int */
-
-	GPIO1_GPIO, /* GPIO0 */
-	GPIO11_GPIO, /* GPIO1 */
-	GPIO9_GPIO, /* GPIO2 */
-	GPIO10_GPIO, /* GPIO3 */
-	GPIO16_PWM0_OUT, /* or GPIO4 */
-	GPIO17_PWM1_OUT, /* or GPIO5 */
-	GPIO94_GPIO, /* GPIO6 */
-	GPIO95_GPIO, /* GPIO7 */
-	GPIO96_GPIO, /* GPIO8 */
-	GPIO97_GPIO, /* GPIO9 */
-	GPIO15_GPIO, /* EXP_IRQ */
-	GPIO18_RDY, /* EXP_WAIT */
-
-	GPIO0_GPIO, /* PWR_INT */
-	GPIO104_GPIO, /* PWR_OFF */
-
-	GPIO12_GPIO, /* touch irq */
-
-	GPIO13_SSP2_TXD,
-	GPIO14_SSP2_SFRM,
-	MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */
-	GPIO22_SSP2_SCLK,
-
-	GPIO81_SSP3_TXD,
-	GPIO82_SSP3_RXD,
-	GPIO83_SSP3_SFRM,
-	GPIO84_SSP3_SCLK,
-
-	GPIO20_GPIO, /* SDIO int */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO100_GPIO, /* SD CD */
-	GPIO101_GPIO, /* SD WP */
-
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO113_AC97_nRESET,
-
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16, /* maybe unused */
-	GPIO85_nPCE_1,
-	GPIO98_GPIO, /* CF IRQ */
-	GPIO99_GPIO, /* CF CD */
-	GPIO103_GPIO, /* Reset */
-
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-
-static struct pxamci_platform_data csb726_mci = {
-	.detect_delay_ms	= 500,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	/* FIXME setpower */
-};
-
-static struct gpiod_lookup_table csb726_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 100 */
-		GPIO_LOOKUP("gpio-pxa", CSB726_GPIO_MMC_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 101 */
-		GPIO_LOOKUP("gpio-pxa", CSB726_GPIO_MMC_RO,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct pxaohci_platform_data csb726_ohci_platform_data = {
-	.port_mode	= PMM_NPS_MODE,
-	.flags		= ENABLE_PORT1 | NO_OC_PROTECTION,
-};
-
-static struct mtd_partition csb726_flash_partitions[] = {
-	{
-		.name		= "Bootloader",
-		.offset		= 0,
-		.size		= CSB726_FLASH_uMON,
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "root",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data csb726_flash_data = {
-	.width		= 2,
-	.parts		= csb726_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(csb726_flash_partitions),
-};
-
-static struct resource csb726_flash_resources[] = {
-	{
-		.start          = PXA_CS0_PHYS,
-		.end            = PXA_CS0_PHYS + CSB726_FLASH_SIZE - 1 ,
-		.flags          = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device csb726_flash = {
-	.name           = "physmap-flash",
-	.dev            = {
-		.platform_data  = &csb726_flash_data,
-	},
-	.resource       = csb726_flash_resources,
-	.num_resources  = ARRAY_SIZE(csb726_flash_resources),
-};
-
-static struct resource csb726_sm501_resources[] = {
-	{
-		.start          = PXA_CS4_PHYS,
-		.end            = PXA_CS4_PHYS + SZ_8M - 1,
-		.flags          = IORESOURCE_MEM,
-		.name		= "sm501-localmem",
-	},
-	{
-		.start          = PXA_CS4_PHYS + SZ_64M - SZ_2M,
-		.end            = PXA_CS4_PHYS + SZ_64M - 1,
-		.flags          = IORESOURCE_MEM,
-		.name		= "sm501-regs",
-	},
-	{
-		.start		= CSB726_IRQ_SM501,
-		.end		= CSB726_IRQ_SM501,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct sm501_initdata csb726_sm501_initdata = {
-/*	.devices	= SM501_USE_USB_HOST, */
-	.devices	= SM501_USE_USB_HOST | SM501_USE_UART0 | SM501_USE_UART1,
-};
-
-static struct sm501_platdata csb726_sm501_platdata = {
-	.init		= &csb726_sm501_initdata,
-};
-
-static struct platform_device csb726_sm501 = {
-	.name		= "sm501",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(csb726_sm501_resources),
-	.resource	= csb726_sm501_resources,
-	.dev		= {
-		.platform_data = &csb726_sm501_platdata,
-	},
-};
-
-static struct resource csb726_lan_resources[] = {
-	{
-		.start	= PXA_CS3_PHYS,
-		.end	= PXA_CS3_PHYS + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= CSB726_IRQ_LAN,
-		.end	= CSB726_IRQ_LAN,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-struct smsc911x_platform_config csb726_lan_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_32BIT,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-
-static struct platform_device csb726_lan = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(csb726_lan_resources),
-	.resource	= csb726_lan_resources,
-	.dev		= {
-		.platform_data	= &csb726_lan_config,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&csb726_flash,
-	&csb726_sm501,
-	&csb726_lan,
-};
-
-static void __init csb726_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
-/*	__raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
-/*	__raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
-	__raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_i2c_info(NULL);
-	pxa27x_set_i2c_power_info(NULL);
-	gpiod_add_lookup_table(&csb726_mci_gpio_table);
-	pxa_set_mci_info(&csb726_mci);
-	pxa_set_ohci_info(&csb726_ohci_platform_data);
-	pxa_set_ac97_info(NULL);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(CSB726, "Cogent CSB726")
-	.atag_offset	= 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_machine   = csb726_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/csb726.h b/arch/arm/mach-pxa/csb726.h
deleted file mode 100644
index 30d7cf926b84..000000000000
--- a/arch/arm/mach-pxa/csb726.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Support for Cogent CSB726
- *
- *  Copyright (c) 2008 Dmitry Baryshkov
- */
-#ifndef CSB726_H
-#define CSB726_H
-
-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
-
-#define CSB726_GPIO_IRQ_LAN	52
-#define CSB726_GPIO_IRQ_SM501	53
-#define CSB726_GPIO_MMC_DETECT	100
-#define CSB726_GPIO_MMC_RO	101
-
-#define CSB726_FLASH_SIZE	(64 * 1024 * 1024)
-#define CSB726_FLASH_uMON	(8 * 1024 * 1024)
-
-#define CSB726_IRQ_LAN		PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_LAN)
-#define CSB726_IRQ_SM501	PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_SM501)
-
-#endif
-
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 09b8495f3fd9..661b3fc43275 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -9,21 +9,17 @@
 #include <linux/dmaengine.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/platform_data/i2c-pxa.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include "udc.h"
-#include <linux/platform_data/usb-pxa3xx-ulpi.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/media/camera-pxa.h>
-#include <mach/audio.h>
-#include <mach/hardware.h>
 #include <linux/platform_data/mmp_dma.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
 
+#include "regs-ost.h"
+#include "reset.h"
 #include "devices.h"
 #include "generic.h"
 
@@ -82,16 +78,10 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info)
 	pxa_register_device(&pxa_device_mci, info);
 }
 
-
 static struct pxa2xx_udc_mach_info pxa_udc_info = {
 	.gpio_pullup = -1,
 };
 
-void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
-{
-	memcpy(&pxa_udc_info, info, sizeof *info);
-}
-
 static struct resource pxa2xx_udc_resources[] = {
 	[0] = {
 		.start	= 0x40600000,
@@ -129,33 +119,6 @@ struct platform_device pxa27x_device_udc = {
 	}
 };
 
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_u2d_resources[] = {
-	[0] = {
-		.start	= 0x54100000,
-		.end	= 0x54100fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_USB2,
-		.end	= IRQ_USB2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_u2d = {
-	.name		= "pxa3xx-u2d",
-	.id		= -1,
-	.resource	= pxa3xx_u2d_resources,
-	.num_resources	= ARRAY_SIZE(pxa3xx_u2d_resources),
-};
-
-void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_u2d, info);
-}
-#endif /* CONFIG_PXA3xx */
-
 static struct resource pxafb_resources[] = {
 	[0] = {
 		.start	= 0x44000000,
@@ -376,47 +339,6 @@ struct platform_device pxa_device_asoc_platform = {
 	.id		= -1,
 };
 
-static u64 pxaficp_dmamask = ~(u32)0;
-
-static struct resource pxa_ir_resources[] = {
-	[0] = {
-		.start  = IRQ_STUART,
-		.end    = IRQ_STUART,
-		.flags  = IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start  = IRQ_ICP,
-		.end    = IRQ_ICP,
-		.flags  = IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start  = 0x40800000,
-		.end	= 0x4080001b,
-		.flags  = IORESOURCE_MEM,
-	},
-	[4] = {
-		.start  = 0x40700000,
-		.end	= 0x40700023,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device pxa_device_ficp = {
-	.name		= "pxa2xx-ir",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa_ir_resources),
-	.resource	= pxa_ir_resources,
-	.dev		= {
-		.dma_mask = &pxaficp_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
-{
-	pxa_register_device(&pxa_device_ficp, info);
-}
-
 static struct resource pxa_rtc_resources[] = {
 	[0] = {
 		.start  = 0x40900000,
@@ -451,49 +373,6 @@ struct platform_device sa1100_device_rtc = {
 	.resource       = pxa_rtc_resources,
 };
 
-static struct resource pxa_ac97_resources[] = {
-	[0] = {
-		.start  = 0x40500000,
-		.end	= 0x40500000 + 0xfff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_AC97,
-		.end    = IRQ_AC97,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa_ac97_dmamask = 0xffffffffUL;
-
-struct platform_device pxa_device_ac97 = {
-	.name           = "pxa2xx-ac97",
-	.id             = -1,
-	.dev            = {
-		.dma_mask = &pxa_ac97_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources  = ARRAY_SIZE(pxa_ac97_resources),
-	.resource       = pxa_ac97_resources,
-};
-
-void __init pxa_set_ac97_info(pxa2xx_audio_ops_t *ops)
-{
-	int ret;
-
-	ret = clk_add_alias("ac97_clk", "pxa2xx-ac97:0", "AC97CLK",
-			   &pxa_device_ac97.dev);
-	if (ret)
-		pr_err("PXA AC97 clock1 alias error: %d\n", ret);
-
-	ret = clk_add_alias("ac97_clk", "pxa2xx-ac97:1", "AC97CLK",
-			    &pxa_device_ac97.dev);
-	if (ret)
-		pr_err("PXA AC97 clock2 alias error: %d\n", ret);
-
-	pxa_register_device(&pxa_device_ac97, ops);
-}
-
 #ifdef CONFIG_PXA25x
 
 static struct resource pxa25x_resource_pwm0[] = {
@@ -607,44 +486,6 @@ struct platform_device pxa25x_device_assp = {
 #endif /* CONFIG_PXA25x */
 
 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-static struct resource pxa27x_resource_camera[] = {
-	[0] = {
-		.start	= 0x50000000,
-		.end	= 0x50000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CAMERA,
-		.end	= IRQ_CAMERA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
-
-static struct platform_device pxa27x_device_camera = {
-	.name		= "pxa27x-camera",
-	.id		= 0, /* This is used to put cameras on this interface */
-	.dev		= {
-		.dma_mask      		= &pxa27x_dma_mask_camera,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_camera),
-	.resource	= pxa27x_resource_camera,
-};
-
-void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
-{
-	struct clk *mclk;
-
-	/* Register a fixed-rate clock for camera sensors. */
-	mclk = clk_register_fixed_rate(NULL, "pxa_camera_clk", NULL, 0,
-					     info->mclk_10khz * 10000);
-	if (!IS_ERR(mclk))
-		clkdev_create(mclk, "mclk", NULL);
-	pxa_register_device(&pxa27x_device_camera, info);
-}
-
 static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
 
 static struct resource pxa27x_resource_ohci[] = {
@@ -678,31 +519,6 @@ void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
 #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
 
 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-static struct resource pxa27x_resource_keypad[] = {
-	[0] = {
-		.start	= 0x41500000,
-		.end	= 0x4150004c,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_KEYPAD,
-		.end	= IRQ_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa27x_device_keypad = {
-	.name		= "pxa27x-keypad",
-	.id		= -1,
-	.resource	= pxa27x_resource_keypad,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_keypad),
-};
-
-void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
-{
-	pxa_register_device(&pxa27x_device_keypad, info);
-}
-
 static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
 
 static struct resource pxa27x_resource_ssp1[] = {
@@ -812,210 +628,6 @@ struct platform_device pxa27x_device_pwm1 = {
 };
 #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
 
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_resources_mci2[] = {
-	[0] = {
-		.start	= 0x42000000,
-		.end	= 0x42000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_MMC2,
-		.end	= IRQ_MMC2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_mci2 = {
-	.name		= "pxa2xx-mci",
-	.id		= 1,
-	.dev		= {
-		.dma_mask = &pxamci_dmamask,
-		.coherent_dma_mask =	0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_mci2),
-	.resource	= pxa3xx_resources_mci2,
-};
-
-void __init pxa3xx_set_mci2_info(struct pxamci_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_mci2, info);
-}
-
-static struct resource pxa3xx_resources_mci3[] = {
-	[0] = {
-		.start	= 0x42500000,
-		.end	= 0x42500fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_MMC3,
-		.end	= IRQ_MMC3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_mci3 = {
-	.name		= "pxa2xx-mci",
-	.id		= 2,
-	.dev		= {
-		.dma_mask = &pxamci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_mci3),
-	.resource	= pxa3xx_resources_mci3,
-};
-
-void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_mci3, info);
-}
-
-static struct resource pxa3xx_resources_gcu[] = {
-	{
-		.start	= 0x54000000,
-		.end	= 0x54000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_GCU,
-		.end	= IRQ_GCU,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device pxa3xx_device_gcu = {
-	.name		= "pxa3xx-gcu",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_gcu),
-	.resource	= pxa3xx_resources_gcu,
-	.dev		= {
-		.dma_mask = &pxa3xx_gcu_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-#endif /* CONFIG_PXA3xx */
-
-#if defined(CONFIG_PXA3xx)
-static struct resource pxa3xx_resources_i2c_power[] = {
-	{
-		.start  = 0x40f500c0,
-		.end    = 0x40f500d3,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PWRI2C,
-		.end	= IRQ_PWRI2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_i2c_power = {
-	.name		= "pxa3xx-pwri2c",
-	.id		= 1,
-	.resource	= pxa3xx_resources_i2c_power,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_i2c_power),
-};
-
-static struct resource pxa3xx_resources_nand[] = {
-	[0] = {
-		.start	= 0x43100000,
-		.end	= 0x43100053,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_NAND,
-		.end	= IRQ_NAND,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device pxa3xx_device_nand = {
-	.name		= "pxa3xx-nand",
-	.id		= -1,
-	.dev		= {
-		.dma_mask = &pxa3xx_nand_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_nand),
-	.resource	= pxa3xx_resources_nand,
-};
-
-void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_nand, info);
-}
-
-static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa3xx_resource_ssp4[] = {
-	[0] = {
-		.start	= 0x41a00000,
-		.end	= 0x41a0003f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP4,
-		.end	= IRQ_SSP4,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-/*
- * PXA3xx SSP is basically equivalent to PXA27x.
- * However, we need to register the device by the correct name in order to
- * make the driver set the correct internal type, hence we provide specific
- * platform_devices for each of them.
- */
-struct platform_device pxa3xx_device_ssp1 = {
-	.name		= "pxa3xx-ssp",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &pxa27x_ssp1_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa27x_resource_ssp1,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp1),
-};
-
-struct platform_device pxa3xx_device_ssp2 = {
-	.name		= "pxa3xx-ssp",
-	.id		= 1,
-	.dev		= {
-		.dma_mask = &pxa27x_ssp2_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa27x_resource_ssp2,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp2),
-};
-
-struct platform_device pxa3xx_device_ssp3 = {
-	.name		= "pxa3xx-ssp",
-	.id		= 2,
-	.dev		= {
-		.dma_mask = &pxa27x_ssp3_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa27x_resource_ssp3,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp3),
-};
-
-struct platform_device pxa3xx_device_ssp4 = {
-	.name		= "pxa3xx-ssp",
-	.id		= 3,
-	.dev		= {
-		.dma_mask = &pxa3xx_ssp4_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa3xx_resource_ssp4,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resource_ssp4),
-};
-#endif /* CONFIG_PXA3xx */
-
 struct resource pxa_resource_gpio[] = {
 	{
 		.start	= 0x40e00000,
@@ -1040,11 +652,7 @@ struct resource pxa_resource_gpio[] = {
 };
 
 struct platform_device pxa25x_device_gpio = {
-#ifdef CONFIG_CPU_PXA26x
-	.name		= "pxa26x-gpio",
-#else
 	.name		= "pxa25x-gpio",
-#endif
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
 	.resource	= pxa_resource_gpio,
@@ -1057,20 +665,6 @@ struct platform_device pxa27x_device_gpio = {
 	.resource	= pxa_resource_gpio,
 };
 
-struct platform_device pxa3xx_device_gpio = {
-	.name		= "pxa3xx-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
-	.resource	= pxa_resource_gpio,
-};
-
-struct platform_device pxa93x_device_gpio = {
-	.name		= "pxa93x-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
-	.resource	= pxa_resource_gpio,
-};
-
 /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
  * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
 void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_controller *info)
@@ -1118,3 +712,12 @@ void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata)
 {
 	pxa_register_device(&pxa2xx_pxa_dma, dma_pdata);
 }
+
+void __init pxa_register_wdt(unsigned int reset_status)
+{
+	struct resource res = DEFINE_RES_MEM(OST_PHYS, OST_LEN);
+
+	reset_status &= RESET_STATUS_WATCHDOG;
+	platform_device_register_resndata(NULL, "sa1100_wdt", -1, &res, 1,
+					  &reset_status, sizeof(reset_status));
+}
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 498b07bc6a3e..82c83939017a 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -9,7 +9,6 @@ extern struct platform_device pxa3xx_device_mci2;
 extern struct platform_device pxa3xx_device_mci3;
 extern struct platform_device pxa25x_device_udc;
 extern struct platform_device pxa27x_device_udc;
-extern struct platform_device pxa3xx_device_u2d;
 extern struct platform_device pxa_device_fb;
 extern struct platform_device pxa_device_ffuart;
 extern struct platform_device pxa_device_btuart;
@@ -17,7 +16,6 @@ extern struct platform_device pxa_device_stuart;
 extern struct platform_device pxa_device_hwuart;
 extern struct platform_device pxa_device_i2c;
 extern struct platform_device pxa_device_i2s;
-extern struct platform_device pxa_device_ficp;
 extern struct platform_device sa1100_device_rtc;
 extern struct platform_device pxa_device_rtc;
 extern struct platform_device pxa_device_ac97;
diff --git a/arch/arm/mach-pxa/eseries-irq.h b/arch/arm/mach-pxa/eseries-irq.h
deleted file mode 100644
index 572d573ce66b..000000000000
--- a/arch/arm/mach-pxa/eseries-irq.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  eseries-irq.h
- *
- *  Copyright (C) Ian Molton <spyro@f2s.com>
- */
-
-#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8)
-#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n))
-
-#define ANGELX_RDY0_IRQ IRQ_ANGELX(0)
-#define ANGELX_ST0_IRQ  IRQ_ANGELX(1)
-#define ANGELX_CD0_IRQ  IRQ_ANGELX(2)
-#define ANGELX_RDY1_IRQ IRQ_ANGELX(3)
-#define ANGELX_ST1_IRQ  IRQ_ANGELX(4)
-#define ANGELX_CD1_IRQ  IRQ_ANGELX(5)
-
-#define TMIO_IRQ_BASE (IRQ_BOARD_START+0)
-#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n))
-
-#define TMIO_SD_IRQ     IRQ_TMIO(1)
-#define TMIO_USB_IRQ    IRQ_TMIO(2)
-
-#define ESERIES_NR_IRQS	(IRQ_BOARD_START + 16)
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
deleted file mode 100644
index f37c44b6139d..000000000000
--- a/arch/arm/mach-pxa/eseries.c
+++ /dev/null
@@ -1,978 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/clkdev.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk-provider.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/tc6387xb.h>
-#include <linux/mfd/tc6393xb.h>
-#include <linux/mfd/t7l66xb.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/memblock.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "pxa25x.h"
-#include <mach/eseries-gpio.h>
-#include "eseries-irq.h"
-#include <mach/audio.h>
-#include <linux/platform_data/video-pxafb.h>
-#include "udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
-
-#include "devices.h"
-#include "generic.h"
-
-/* Only e800 has 128MB RAM */
-void __init eseries_fixup(struct tag *tags, char **cmdline)
-{
-	if (machine_is_e800())
-		memblock_add(0xa0000000, SZ_128M);
-	else
-		memblock_add(0xa0000000, SZ_64M);
-}
-
-static struct gpiod_lookup_table e7xx_gpio_vbus_gpiod_table __maybe_unused = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_DISC,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_PULLUP,
-			    "pullup", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device e7xx_gpio_vbus __maybe_unused = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-struct pxaficp_platform_data e7xx_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_E7XX_IR_OFF,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-int eseries_tmio_enable(struct platform_device *dev)
-{
-	/* Reset - bring SUSPEND high before PCLR */
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
-	msleep(1);
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
-	msleep(1);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
-	msleep(1);
-	return 0;
-}
-
-int eseries_tmio_disable(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
-	return 0;
-}
-
-int eseries_tmio_suspend(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	return 0;
-}
-
-int eseries_tmio_resume(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
-	msleep(1);
-	return 0;
-}
-
-void eseries_get_tmio_gpios(void)
-{
-	gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
-	gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
-	gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
-}
-
-/* TMIO controller uses the same resources on all e-series machines. */
-struct resource eseries_tmio_resources[] = {
-	[0] = {
-		.start  = PXA_CS4_PHYS,
-		.end    = PXA_CS4_PHYS + 0x1fffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
-		.end    = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-/* Some e-series hardware cannot control the 32K clock */
-static void __init __maybe_unused eseries_register_clks(void)
-{
-	clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, 0, 32768);
-}
-
-#ifdef CONFIG_MACH_E330
-/* -------------------- e330 tc6387xb parameters -------------------- */
-
-static struct tc6387xb_platform_data e330_tc6387xb_info = {
-	.enable   = &eseries_tmio_enable,
-	.disable  = &eseries_tmio_disable,
-	.suspend  = &eseries_tmio_suspend,
-	.resume   = &eseries_tmio_resume,
-};
-
-static struct platform_device e330_tc6387xb_device = {
-	.name           = "tc6387xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e330_tc6387xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* --------------------------------------------------------------- */
-
-static struct platform_device *e330_devices[] __initdata = {
-	&e330_tc6387xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e330_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(e330_devices));
-}
-
-MACHINE_START(E330, "Toshiba e330")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e330_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E350
-/* -------------------- e350 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e350_t7l66xb_info = {
-	.irq_base               = IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e350_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e350_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *e350_devices[] __initdata = {
-	&e350_t7l66xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e350_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
-}
-
-MACHINE_START(E350, "Toshiba e350")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e350_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E400
-/* ------------------------ E400 LCD definitions ------------------------ */
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
-	.pixclock       = 140703,
-	.xres           = 240,
-	.yres           = 320,
-	.bpp            = 16,
-	.hsync_len      = 4,
-	.left_margin    = 28,
-	.right_margin   = 8,
-	.vsync_len      = 3,
-	.upper_margin   = 5,
-	.lower_margin   = 6,
-	.sync           = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
-	.modes          = &e400_pxafb_mode_info,
-	.num_modes      = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-	.lccr3          = 0,
-	.pxafb_backlight_power  = NULL,
-};
-
-/* ------------------------ E400 MFP config ----------------------------- */
-
-static unsigned long e400_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ---------------------------------------------------------------------- */
-
-static struct mtd_partition partition_a = {
-	.name = "Internal NAND flash",
-	.offset =  0,
-	.size =  MTDPART_SIZ_FULL,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static struct tmio_nand_data e400_t7l66xb_nand_config = {
-	.num_partitions = 1,
-	.partition = &partition_a,
-	.badblock_pattern = &e400_t7l66xb_nand_bbt,
-};
-
-static struct t7l66xb_platform_data e400_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-
-	.nand_data              = &e400_t7l66xb_nand_config,
-};
-
-static struct platform_device e400_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e400_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *e400_devices[] __initdata = {
-	&e400_t7l66xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e400_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	/* Fixme - e400 may have a switched clock */
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
-}
-
-MACHINE_START(E400, "Toshiba e400")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e400_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E740
-/* ------------------------ e740 video support --------------------------- */
-
-static struct w100_gen_regs e740_lcd_regs = {
-	.lcd_format =            0x00008023,
-	.lcdd_cntl1 =            0x0f000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00ffff03,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 20,
-	.right_margin    = 28,
-	.upper_margin    = 9,
-	.lower_margin    = 8,
-	.crtc_ss         = 0x80140013,
-	.crtc_ls         = 0x81150110,
-	.crtc_gs         = 0x80050005,
-	.crtc_vpos_gs    = 0x000a0009,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa906000a,
-	.crtc_gclk       = 0x80050108,
-	.crtc_goe        = 0x80050108,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-	.crtc_ps1_active =       0x41060010,
-};
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
-	.init_data1 = 0x21002103,
-	.gpio_dir1  = 0xffffdeff,
-	.gpio_oe1   = 0x03c00643,
-	.init_data2 = 0x003f003f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
-	.modelist   = &e740_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e740_lcd_regs,
-	.gpio       = &e740_w100_gpio_info,
-	.xtal_freq = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e740_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e740_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e740_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e740_fb_resources),
-	.resource       = e740_fb_resources,
-};
-
-/* --------------------------- MFP Pin config -------------------------- */
-
-static unsigned long e740_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
-	GPIO40_GPIO,  /* Mic amp power */
-	GPIO41_GPIO,  /* Headphone amp power */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* -------------------- e740 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e740_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e740_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e740_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct platform_device e740_audio_device = {
-	.name		= "e740-audio",
-	.id		= -1,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *e740_devices[] __initdata = {
-	&e740_fb_device,
-	&e740_t7l66xb_device,
-	&e7xx_gpio_vbus,
-	&e740_audio_device,
-};
-
-static void __init e740_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
-			"UDCCLK", &pxa25x_device_udc.dev),
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E740, "Toshiba e740")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e740_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E750
-/* ---------------------- E750 LCD definitions -------------------- */
-
-static struct w100_gen_regs e750_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x00000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00fff003,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e750_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 21,
-	.right_margin    = 22,
-	.upper_margin    = 5,
-	.lower_margin    = 4,
-	.crtc_ss         = 0x80150014,
-	.crtc_ls         = 0x8014000d,
-	.crtc_gs         = 0xc1000005,
-	.crtc_vpos_gs    = 0x00020147,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa1700030,
-	.crtc_gclk       = 0x80cc0015,
-	.crtc_goe        = 0x80cc0015,
-	.crtc_ps1_active = 0x61060017,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs e750_w100_gpio_info = {
-	.init_data1 = 0x01192f1b,
-	.gpio_dir1  = 0xd5ffdeff,
-	.gpio_oe1   = 0x000020bf,
-	.init_data2 = 0x010f010f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000001cf,
-};
-
-static struct w100fb_mach_info e750_fb_info = {
-	.modelist   = &e750_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e750_lcd_regs,
-	.gpio       = &e750_w100_gpio_info,
-	.xtal_freq  = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e750_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e750_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e750_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e750_fb_resources),
-	.resource       = e750_fb_resources,
-};
-
-/* -------------------- e750 MFP parameters -------------------- */
-
-static unsigned long e750_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO11_3_6MHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO4_GPIO,  /* Headphone amp power */
-	GPIO7_GPIO,  /* Speaker amp power */
-	GPIO37_GPIO, /* Headphone detect */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	/* GPIO11_GPIO,  IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ----------------- e750 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e750_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.gpio_base      = -1,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e750_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e750_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct platform_device e750_audio_device = {
-	.name		= "e750-audio",
-	.id		= -1,
-};
-
-/* ------------------------------------------------------------- */
-
-static struct platform_device *e750_devices[] __initdata = {
-	&e750_fb_device,
-	&e750_tc6393xb_device,
-	&e7xx_gpio_vbus,
-	&e750_audio_device,
-};
-
-static void __init e750_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E750, "Toshiba e750")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e750_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E800
-/* ------------------------ e800 LCD definitions ------------------------- */
-
-static unsigned long e800_pin_config[] __initdata = {
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* tc6393xb */
-	GPIO11_3_6MHz,
-};
-
-static struct w100_gen_regs e800_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x02a00000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x000ff2a3,
-	.genlcd_cntl2 =          0x000002a3,
-	.genlcd_cntl3 =          0x000102aa,
-};
-
-static struct w100_mode e800_lcd_mode[2] = {
-	[0] = {
-		.xres            = 480,
-		.yres            = 640,
-		.left_margin     = 52,
-		.right_margin    = 148,
-		.upper_margin    = 2,
-		.lower_margin    = 6,
-		.crtc_ss         = 0x80350034,
-		.crtc_ls         = 0x802b0026,
-		.crtc_gs         = 0x80160016,
-		.crtc_vpos_gs    = 0x00020003,
-		.crtc_rev        = 0x0040001d,
-		.crtc_dclk       = 0xe0000000,
-		.crtc_gclk       = 0x82a50049,
-		.crtc_goe        = 0x80ee001c,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 128,
-		.pixclk_divider         = 4,
-		.pixclk_divider_rotated = 6,
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	},
-	[1] = {
-		.xres            = 240,
-		.yres            = 320,
-		.left_margin     = 15,
-		.right_margin    = 88,
-		.upper_margin    = 0,
-		.lower_margin    = 7,
-		.crtc_ss         = 0xd010000f,
-		.crtc_ls         = 0x80070003,
-		.crtc_gs         = 0x80000000,
-		.crtc_vpos_gs    = 0x01460147,
-		.crtc_rev        = 0x00400003,
-		.crtc_dclk       = 0xa1700030,
-		.crtc_gclk       = 0x814b0008,
-		.crtc_goe        = 0x80cc0015,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 100,
-		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
-		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	}
-};
-
-
-static struct w100_gpio_regs e800_w100_gpio_info = {
-	.init_data1 = 0xc13fc019,
-	.gpio_dir1  = 0x3e40df7f,
-	.gpio_oe1   = 0x003c3000,
-	.init_data2 = 0x00000000,
-	.gpio_dir2  = 0x00000000,
-	.gpio_oe2   = 0x00000000,
-};
-
-static struct w100_mem_info e800_w100_mem_info = {
-	.ext_cntl        = 0x09640011,
-	.sdram_mode_reg  = 0x00600021,
-	.ext_timing_cntl = 0x10001545,
-	.io_cntl         = 0x7ddd7333,
-	.size            = 0x1fffff,
-};
-
-static void e800_tg_change(struct w100fb_par *par)
-{
-	unsigned long tmp;
-
-	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
-	if (par->mode->xres == 480)
-		tmp |= 0x100;
-	else
-		tmp &= ~0x100;
-	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
-}
-
-static struct w100_tg_info e800_tg_info = {
-	.change = e800_tg_change,
-};
-
-static struct w100fb_mach_info e800_fb_info = {
-	.modelist   = e800_lcd_mode,
-	.num_modes  = 2,
-	.regs       = &e800_lcd_regs,
-	.gpio       = &e800_w100_gpio_info,
-	.mem        = &e800_w100_mem_info,
-	.tg         = &e800_tg_info,
-	.xtal_freq  = 16000000,
-};
-
-static struct resource e800_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e800_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e800_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e800_fb_resources),
-	.resource       = e800_fb_resources,
-};
-
-/* --------------------------- UDC definitions --------------------------- */
-
-static struct gpiod_lookup_table e800_gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_DISC,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_PULLUP,
-			    "pullup", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device e800_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-
-/* ----------------- e800 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e800_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.gpio_base      = -1,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e800_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e800_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct platform_device e800_audio_device = {
-	.name		= "e800-audio",
-	.id		= -1,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *e800_devices[] __initdata = {
-	&e800_fb_device,
-	&e800_tc6393xb_device,
-	&e800_gpio_vbus,
-	&e800_audio_device,
-};
-
-static void __init e800_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e800_gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
-	pxa_set_ac97_info(NULL);
-}
-
-MACHINE_START(E800, "Toshiba e800")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e800_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
deleted file mode 100644
index eb85950e7c0e..000000000000
--- a/arch/arm/mach-pxa/ezx.c
+++ /dev/null
@@ -1,1255 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  ezx.c - Common code for the EZX platform.
- *
- *  Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
- *		  2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
- *		  2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds-lp3944.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/hardware.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/media/camera-pxa.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define EZX_NR_IRQS			(IRQ_BOARD_START + 24)
-
-#define GPIO12_A780_FLIP_LID 		12
-#define GPIO15_A1200_FLIP_LID 		15
-#define GPIO15_A910_FLIP_LID 		15
-#define GPIO12_E680_LOCK_SWITCH 	12
-#define GPIO15_E6_LOCK_SWITCH 		15
-#define GPIO50_nCAM_EN			50
-#define GPIO19_GEN1_CAM_RST		19
-#define GPIO28_GEN2_CAM_RST		28
-
-static struct pwm_lookup ezx_pwm_lookup[] __maybe_unused = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data ezx_backlight_data = {
-	.max_brightness	= 1023,
-	.dft_brightness	= 1023,
-};
-
-static struct platform_device ezx_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &pxa27x_device_pwm0.dev,
-		.platform_data = &ezx_backlight_data,
-	},
-};
-
-static struct pxafb_mode_info mode_ezx_old = {
-	.pixclock		= 150000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 10,
-	.left_margin		= 20,
-	.right_margin		= 10,
-	.vsync_len		= 2,
-	.upper_margin		= 3,
-	.lower_margin		= 2,
-	.sync			= 0,
-};
-
-static struct pxafb_mach_info ezx_fb_info_1 __maybe_unused = {
-	.modes		= &mode_ezx_old,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-};
-
-static struct pxafb_mode_info mode_72r89803y01 = {
-	.pixclock		= 192308,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 32,
-	.depth			= 18,
-	.hsync_len		= 10,
-	.left_margin		= 20,
-	.right_margin		= 10,
-	.vsync_len		= 2,
-	.upper_margin		= 3,
-	.lower_margin		= 2,
-	.sync			= 0,
-};
-
-static struct pxafb_mach_info ezx_fb_info_2 __maybe_unused = {
-	.modes		= &mode_72r89803y01,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_18BPP,
-};
-
-static struct platform_device *ezx_devices[] __initdata __maybe_unused = {
-	&ezx_backlight_device,
-};
-
-static unsigned long ezx_pin_config[] __initdata __maybe_unused = {
-	/* PWM backlight */
-	GPIO16_PWM0_OUT,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* PCAP SSP */
-	GPIO29_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO24_GPIO,				/* pcap chip select */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* pcap interrupt */
-	GPIO4_GPIO | MFP_LPM_DRIVE_HIGH,	/* WDI_AP */
-	GPIO55_GPIO | MFP_LPM_DRIVE_HIGH,	/* SYS_RESTART */
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO11_GPIO,				/* mmc detect */
-
-	/* usb to external transceiver */
-	GPIO34_USB_P2_2,
-	GPIO35_USB_P2_1,
-	GPIO36_USB_P2_4,
-	GPIO39_USB_P2_6,
-	GPIO40_USB_P2_5,
-	GPIO53_USB_P2_3,
-
-	/* usb to Neptune GSM chip */
-	GPIO30_USB_P3_2,
-	GPIO31_USB_P3_6,
-	GPIO90_USB_P3_5,
-	GPIO91_USB_P3_1,
-	GPIO56_USB_P3_4,
-	GPIO113_USB_P3_3,
-};
-
-#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
-static unsigned long gen1_pin_config[] __initdata = {
-	/* flip / lockswitch */
-	GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
-
-	/* bluetooth (bcm2035) */
-	GPIO14_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
-	GPIO48_GPIO,				/* RESET */
-	GPIO28_GPIO,				/* WAKEUP */
-
-	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
-	GPIO57_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
-	GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI2 */
-	GPIO82_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
-	GPIO99_GPIO | MFP_LPM_DRIVE_HIGH,	/* TC_MM_EN */
-
-	/* sound */
-	GPIO52_SSP3_SCLK,
-	GPIO83_SSP3_SFRM,
-	GPIO81_SSP3_TXD,
-	GPIO89_SSP3_RXD,
-
-	/* ssp2 pins to in */
-	GPIO22_GPIO,				/* SSP2_SCLK */
-	GPIO37_GPIO,				/* SSP2_SFRM */
-	GPIO38_GPIO,				/* SSP2_TXD */
-	GPIO88_GPIO,				/* SSP2_RXD */
-
-	/* camera */
-	GPIO23_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO85_CIF_LV,
-	GPIO84_CIF_FV,
-	GPIO27_CIF_DD_0,
-	GPIO114_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO115_CIF_DD_3,
-	GPIO95_CIF_DD_4,
-	GPIO94_CIF_DD_5,
-	GPIO17_CIF_DD_6,
-	GPIO108_CIF_DD_7,
-	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
-	GPIO19_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
-
-	/* EMU */
-	GPIO120_GPIO,				/* EMU_MUX1 */
-	GPIO119_GPIO,				/* EMU_MUX2 */
-	GPIO86_GPIO,				/* SNP_INT_CTL */
-	GPIO87_GPIO,				/* SNP_INT_IN */
-};
-#endif
-
-#if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
-	defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
-static unsigned long gen2_pin_config[] __initdata = {
-	/* flip / lockswitch */
-	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
-
-	/* EOC */
-	GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
-
-	/* bluetooth (bcm2045) */
-	GPIO13_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
-	GPIO37_GPIO,				/* RESET */
-	GPIO57_GPIO,				/* WAKEUP */
-
-	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
-	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL,	/* WDI */
-	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
-	GPIO41_GPIO,				/* BP_FLASH */
-
-	/* sound */
-	GPIO52_SSP3_SCLK,
-	GPIO83_SSP3_SFRM,
-	GPIO81_SSP3_TXD,
-	GPIO82_SSP3_RXD,
-
-	/* ssp2 pins to in */
-	GPIO22_GPIO,				/* SSP2_SCLK */
-	GPIO14_GPIO,				/* SSP2_SFRM */
-	GPIO38_GPIO,				/* SSP2_TXD */
-	GPIO88_GPIO,				/* SSP2_RXD */
-
-	/* camera */
-	GPIO23_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO85_CIF_LV,
-	GPIO84_CIF_FV,
-	GPIO27_CIF_DD_0,
-	GPIO114_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO115_CIF_DD_3,
-	GPIO95_CIF_DD_4,
-	GPIO48_CIF_DD_5,
-	GPIO93_CIF_DD_6,
-	GPIO12_CIF_DD_7,
-	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
-	GPIO28_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
-	GPIO17_GPIO,				/* CAM_FLASH */
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A780
-static unsigned long a780_pin_config[] __initdata = {
-	/* keypad */
-	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-
-	/* attenuate sound */
-	GPIO96_GPIO,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_E680
-static unsigned long e680_pin_config[] __initdata = {
-	/* keypad */
-	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-
-	/* MIDI */
-	GPIO79_GPIO,				/* VA_SEL_BUL */
-	GPIO80_GPIO,				/* FLT_SEL_BUL */
-	GPIO78_GPIO,				/* MIDI_RESET */
-	GPIO33_GPIO,				/* MIDI_CS */
-	GPIO15_GPIO,				/* MIDI_IRQ */
-	GPIO49_GPIO,				/* MIDI_NPWE */
-	GPIO18_GPIO,				/* MIDI_RDY */
-
-	/* leds */
-	GPIO46_GPIO,
-	GPIO47_GPIO,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A1200
-static unsigned long a1200_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A910
-static unsigned long a910_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-
-	/* WLAN */
-	GPIO89_GPIO,				/* RESET */
-	GPIO33_GPIO,				/* WAKEUP */
-	GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
-
-	/* MMC CS */
-	GPIO20_GPIO,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_E2
-static unsigned long e2_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_E6
-static unsigned long e6_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-};
-#endif
-
-/* KEYPAD */
-#ifdef CONFIG_MACH_EZX_A780
-static const unsigned int a780_key_map[] = {
-	KEY(0, 0, KEY_SEND),
-	KEY(0, 1, KEY_BACK),
-	KEY(0, 2, KEY_END),
-	KEY(0, 3, KEY_PAGEUP),
-	KEY(0, 4, KEY_UP),
-
-	KEY(1, 0, KEY_NUMERIC_1),
-	KEY(1, 1, KEY_NUMERIC_2),
-	KEY(1, 2, KEY_NUMERIC_3),
-	KEY(1, 3, KEY_SELECT),
-	KEY(1, 4, KEY_KPENTER),
-
-	KEY(2, 0, KEY_NUMERIC_4),
-	KEY(2, 1, KEY_NUMERIC_5),
-	KEY(2, 2, KEY_NUMERIC_6),
-	KEY(2, 3, KEY_RECORD),
-	KEY(2, 4, KEY_LEFT),
-
-	KEY(3, 0, KEY_NUMERIC_7),
-	KEY(3, 1, KEY_NUMERIC_8),
-	KEY(3, 2, KEY_NUMERIC_9),
-	KEY(3, 3, KEY_HOME),
-	KEY(3, 4, KEY_RIGHT),
-
-	KEY(4, 0, KEY_NUMERIC_STAR),
-	KEY(4, 1, KEY_NUMERIC_0),
-	KEY(4, 2, KEY_NUMERIC_POUND),
-	KEY(4, 3, KEY_PAGEDOWN),
-	KEY(4, 4, KEY_DOWN),
-};
-
-static struct matrix_keymap_data a780_matrix_keymap_data = {
-	.keymap			= a780_key_map,
-	.keymap_size		= ARRAY_SIZE(a780_key_map),
-};
-
-static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 5,
-	.matrix_keymap_data = &a780_matrix_keymap_data,
-
-	.direct_key_map = { KEY_CAMERA },
-	.direct_key_num = 1,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_A780 */
-
-#ifdef CONFIG_MACH_EZX_E680
-static const unsigned int e680_key_map[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_RESERVED),
-	KEY(0, 3, KEY_SEND),
-
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_LEFT),
-	KEY(1, 2, KEY_PAGEUP),
-	KEY(1, 3, KEY_PAGEDOWN),
-
-	KEY(2, 0, KEY_RESERVED),
-	KEY(2, 1, KEY_RESERVED),
-	KEY(2, 2, KEY_RESERVED),
-	KEY(2, 3, KEY_KPENTER),
-};
-
-static struct matrix_keymap_data e680_matrix_keymap_data = {
-	.keymap			= e680_key_map,
-	.keymap_size		= ARRAY_SIZE(e680_key_map),
-};
-
-static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
-	.matrix_key_rows = 3,
-	.matrix_key_cols = 4,
-	.matrix_keymap_data = &e680_matrix_keymap_data,
-
-	.direct_key_map = {
-		KEY_CAMERA,
-		KEY_RESERVED,
-		KEY_RESERVED,
-		KEY_F1,
-		KEY_CANCEL,
-		KEY_F2,
-	},
-	.direct_key_num = 6,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_E680 */
-
-#ifdef CONFIG_MACH_EZX_A1200
-static const unsigned int a1200_key_map[] = {
-	KEY(0, 0, KEY_RESERVED),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_PAGEDOWN),
-	KEY(0, 3, KEY_RESERVED),
-	KEY(0, 4, KEY_RESERVED),
-	KEY(0, 5, KEY_RESERVED),
-
-	KEY(1, 0, KEY_RESERVED),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_CAMERA),
-	KEY(1, 3, KEY_RESERVED),
-	KEY(1, 4, KEY_RESERVED),
-	KEY(1, 5, KEY_RESERVED),
-
-	KEY(2, 0, KEY_RESERVED),
-	KEY(2, 1, KEY_KPENTER),
-	KEY(2, 2, KEY_RECORD),
-	KEY(2, 3, KEY_RESERVED),
-	KEY(2, 4, KEY_RESERVED),
-	KEY(2, 5, KEY_SELECT),
-
-	KEY(3, 0, KEY_RESERVED),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_RESERVED),
-	KEY(3, 4, KEY_RESERVED),
-	KEY(3, 5, KEY_RESERVED),
-
-	KEY(4, 0, KEY_RESERVED),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_PAGEUP),
-	KEY(4, 3, KEY_RESERVED),
-	KEY(4, 4, KEY_RESERVED),
-	KEY(4, 5, KEY_RESERVED),
-};
-
-static struct matrix_keymap_data a1200_matrix_keymap_data = {
-	.keymap			= a1200_key_map,
-	.keymap_size		= ARRAY_SIZE(a1200_key_map),
-};
-
-static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_keymap_data = &a1200_matrix_keymap_data,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_A1200 */
-
-#ifdef CONFIG_MACH_EZX_E6
-static const unsigned int e6_key_map[] = {
-	KEY(0, 0, KEY_RESERVED),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_PAGEDOWN),
-	KEY(0, 3, KEY_RESERVED),
-	KEY(0, 4, KEY_RESERVED),
-	KEY(0, 5, KEY_NEXTSONG),
-
-	KEY(1, 0, KEY_RESERVED),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_PROG1),
-	KEY(1, 3, KEY_RESERVED),
-	KEY(1, 4, KEY_RESERVED),
-	KEY(1, 5, KEY_RESERVED),
-
-	KEY(2, 0, KEY_RESERVED),
-	KEY(2, 1, KEY_ENTER),
-	KEY(2, 2, KEY_CAMERA),
-	KEY(2, 3, KEY_RESERVED),
-	KEY(2, 4, KEY_RESERVED),
-	KEY(2, 5, KEY_WWW),
-
-	KEY(3, 0, KEY_RESERVED),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_RESERVED),
-	KEY(3, 4, KEY_RESERVED),
-	KEY(3, 5, KEY_PLAYPAUSE),
-
-	KEY(4, 0, KEY_RESERVED),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_PAGEUP),
-	KEY(4, 3, KEY_RESERVED),
-	KEY(4, 4, KEY_RESERVED),
-	KEY(4, 5, KEY_PREVIOUSSONG),
-};
-
-static struct matrix_keymap_data e6_keymap_data = {
-	.keymap			= e6_key_map,
-	.keymap_size		= ARRAY_SIZE(e6_key_map),
-};
-
-static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_keymap_data = &e6_keymap_data,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_E6 */
-
-#ifdef CONFIG_MACH_EZX_A910
-static const unsigned int a910_key_map[] = {
-	KEY(0, 0, KEY_NUMERIC_6),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_PAGEDOWN),
-	KEY(0, 3, KEY_KPENTER),
-	KEY(0, 4, KEY_NUMERIC_5),
-	KEY(0, 5, KEY_CAMERA),
-
-	KEY(1, 0, KEY_NUMERIC_8),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_RESERVED),
-	KEY(1, 3, KEY_F1), /* Left SoftKey */
-	KEY(1, 4, KEY_NUMERIC_STAR),
-	KEY(1, 5, KEY_RESERVED),
-
-	KEY(2, 0, KEY_NUMERIC_7),
-	KEY(2, 1, KEY_NUMERIC_9),
-	KEY(2, 2, KEY_RECORD),
-	KEY(2, 3, KEY_F2), /* Right SoftKey */
-	KEY(2, 4, KEY_BACK),
-	KEY(2, 5, KEY_SELECT),
-
-	KEY(3, 0, KEY_NUMERIC_2),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_NUMERIC_0),
-	KEY(3, 4, KEY_NUMERIC_1),
-	KEY(3, 5, KEY_RECORD),
-
-	KEY(4, 0, KEY_NUMERIC_4),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_PAGEUP),
-	KEY(4, 3, KEY_NUMERIC_POUND),
-	KEY(4, 4, KEY_NUMERIC_3),
-	KEY(4, 5, KEY_RESERVED),
-};
-
-static struct matrix_keymap_data a910_matrix_keymap_data = {
-	.keymap			= a910_key_map,
-	.keymap_size		= ARRAY_SIZE(a910_key_map),
-};
-
-static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_keymap_data = &a910_matrix_keymap_data,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_A910 */
-
-#ifdef CONFIG_MACH_EZX_E2
-static const unsigned int e2_key_map[] = {
-	KEY(0, 0, KEY_NUMERIC_6),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_NUMERIC_9),
-	KEY(0, 3, KEY_NEXTSONG),
-	KEY(0, 4, KEY_NUMERIC_5),
-	KEY(0, 5, KEY_F1), /* Left SoftKey */
-
-	KEY(1, 0, KEY_NUMERIC_8),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_RESERVED),
-	KEY(1, 3, KEY_PAGEUP),
-	KEY(1, 4, KEY_NUMERIC_STAR),
-	KEY(1, 5, KEY_F2), /* Right SoftKey */
-
-	KEY(2, 0, KEY_NUMERIC_7),
-	KEY(2, 1, KEY_KPENTER),
-	KEY(2, 2, KEY_RECORD),
-	KEY(2, 3, KEY_PAGEDOWN),
-	KEY(2, 4, KEY_BACK),
-	KEY(2, 5, KEY_NUMERIC_0),
-
-	KEY(3, 0, KEY_NUMERIC_2),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_PLAYPAUSE),
-	KEY(3, 4, KEY_NUMERIC_1),
-	KEY(3, 5, KEY_SOUND), /* Music SoftKey */
-
-	KEY(4, 0, KEY_NUMERIC_4),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_NUMERIC_POUND),
-	KEY(4, 3, KEY_PREVIOUSSONG),
-	KEY(4, 4, KEY_NUMERIC_3),
-	KEY(4, 5, KEY_RESERVED),
-};
-
-static struct matrix_keymap_data e2_matrix_keymap_data = {
-	.keymap			= e2_key_map,
-	.keymap_size		= ARRAY_SIZE(e2_key_map),
-};
-
-static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_keymap_data = &e2_matrix_keymap_data,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_E2 */
-
-#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_A910)
-/* camera */
-static struct regulator_consumer_supply camera_regulator_supplies[] = {
-	REGULATOR_SUPPLY("vdd", "0-005d"),
-};
-
-static struct regulator_init_data camera_regulator_initdata = {
-	.consumer_supplies = camera_regulator_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(camera_regulator_supplies),
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config camera_regulator_config = {
-	.supply_name		= "camera_vdd",
-	.microvolts		= 2800000,
-	.init_data		= &camera_regulator_initdata,
-};
-
-static struct platform_device camera_supply_regulator_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= 1,
-	.dev	= {
-		.platform_data = &camera_regulator_config,
-	},
-};
-
-static struct gpiod_lookup_table camera_supply_gpiod_table = {
-	.dev_id = "reg-fixed-voltage.1",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO50_nCAM_EN,
-			    NULL, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A780
-/* gpio_keys */
-static struct gpio_keys_button a780_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO12_A780_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A780 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
-	.buttons  = a780_buttons,
-	.nbuttons = ARRAY_SIZE(a780_buttons),
-};
-
-static struct platform_device a780_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a780_gpio_keys_platform_data,
-	},
-};
-
-/* camera */
-static int a780_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
-	msleep(10);
-	gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
-
-	return 0;
-}
-
-static int a780_camera_init(void)
-{
-	int err;
-
-	/*
-	 * GPIO50_nCAM_EN is active low
-	 * GPIO19_GEN1_CAM_RST is active on rising edge
-	 */
-	err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
-	if (err) {
-		pr_err("%s: Failed to request CAM_RST\n", __func__);
-		return err;
-	}
-
-	gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
-	a780_camera_reset(NULL);
-
-	return 0;
-}
-
-struct pxacamera_platform_data a780_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN |
-		PXA_CAMERA_PCP,
-	.mclk_10khz = 5000,
-	.sensor_i2c_adapter_id = 0,
-	.sensor_i2c_address = 0x5d,
-};
-
-static struct i2c_board_info a780_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("mt9m111", 0x5d),
-	},
-};
-
-static struct platform_device *a780_devices[] __initdata = {
-	&a780_gpio_keys,
-	&camera_supply_regulator_device,
-};
-
-static void __init a780_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(a780_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_1);
-
-	pxa_set_keypad_info(&a780_keypad_platform_data);
-
-	if (a780_camera_init() == 0)
-		pxa_set_camera_info(&a780_pxacamera_platform_data);
-
-	gpiod_add_lookup_table(&camera_supply_gpiod_table);
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(EZX_A780, "Motorola EZX A780")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = a780_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_E680
-/* gpio_keys */
-static struct gpio_keys_button e680_buttons[] = {
-	[0] = {
-		.code       = KEY_SCREENLOCK,
-		.gpio       = GPIO12_E680_LOCK_SWITCH,
-		.active_low = 0,
-		.desc       = "E680 lock switch",
-		.type       = EV_KEY,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
-	.buttons  = e680_buttons,
-	.nbuttons = ARRAY_SIZE(e680_buttons),
-};
-
-static struct platform_device e680_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &e680_gpio_keys_platform_data,
-	},
-};
-
-static struct i2c_board_info __initdata e680_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *e680_devices[] __initdata = {
-	&e680_gpio_keys,
-};
-
-static void __init e680_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_1);
-
-	pxa_set_keypad_info(&e680_keypad_platform_data);
-
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(e680_devices));
-}
-
-MACHINE_START(EZX_E680, "Motorola EZX E680")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = e680_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_A1200
-/* gpio_keys */
-static struct gpio_keys_button a1200_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO15_A1200_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A1200 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
-	.buttons  = a1200_buttons,
-	.nbuttons = ARRAY_SIZE(a1200_buttons),
-};
-
-static struct platform_device a1200_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a1200_gpio_keys_platform_data,
-	},
-};
-
-static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *a1200_devices[] __initdata = {
-	&a1200_gpio_keys,
-};
-
-static void __init a1200_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&a1200_keypad_platform_data);
-
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
-}
-
-MACHINE_START(EZX_A1200, "Motorola EZX A1200")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = a1200_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_A910
-/* gpio_keys */
-static struct gpio_keys_button a910_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO15_A910_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A910 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
-	.buttons  = a910_buttons,
-	.nbuttons = ARRAY_SIZE(a910_buttons),
-};
-
-static struct platform_device a910_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a910_gpio_keys_platform_data,
-	},
-};
-
-/* camera */
-static int a910_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
-	msleep(10);
-	gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
-
-	return 0;
-}
-
-static int a910_camera_init(void)
-{
-	int err;
-
-	/*
-	 * GPIO50_nCAM_EN is active low
-	 * GPIO28_GEN2_CAM_RST is active on rising edge
-	 */
-	err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
-	if (err) {
-		pr_err("%s: Failed to request CAM_RST\n", __func__);
-		return err;
-	}
-
-	gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
-	a910_camera_reset(NULL);
-
-	return 0;
-}
-
-struct pxacamera_platform_data a910_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN |
-		PXA_CAMERA_PCP,
-	.mclk_10khz = 5000,
-	.sensor_i2c_adapter_id = 0,
-	.sensor_i2c_address = 0x5d,
-};
-
-/* leds-lp3944 */
-static struct lp3944_platform_data a910_lp3944_leds = {
-	.leds_size = LP3944_LEDS_MAX,
-	.leds = {
-		[0] = {
-			.name = "a910:red:",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		[1] = {
-			.name = "a910:green:",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		[2] {
-			.name = "a910:blue:",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		/* Leds 3 and 4 are used as display power switches */
-		[3] = {
-			.name = "a910::cli_display",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED_INVERTED
-		},
-		[4] = {
-			.name = "a910::main_display",
-			.status = LP3944_LED_STATUS_ON,
-			.type = LP3944_LED_TYPE_LED_INVERTED
-		},
-		[5] = { .type = LP3944_LED_TYPE_NONE },
-		[6] = {
-			.name = "a910::torch",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		[7] = {
-			.name = "a910::flash",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED_INVERTED,
-		},
-	},
-};
-
-static struct i2c_board_info __initdata a910_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("lp3944", 0x60),
-		.platform_data = &a910_lp3944_leds,
-	},
-	{
-		I2C_BOARD_INFO("mt9m111", 0x5d),
-	},
-};
-
-static struct platform_device *a910_devices[] __initdata = {
-	&a910_gpio_keys,
-	&camera_supply_regulator_device,
-};
-
-static void __init a910_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&a910_keypad_platform_data);
-
-	if (a910_camera_init() == 0)
-		pxa_set_camera_info(&a910_pxacamera_platform_data);
-
-	gpiod_add_lookup_table(&camera_supply_gpiod_table);
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(EZX_A910, "Motorola EZX A910")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = a910_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_E6
-/* gpio_keys */
-static struct gpio_keys_button e6_buttons[] = {
-	[0] = {
-		.code       = KEY_SCREENLOCK,
-		.gpio       = GPIO15_E6_LOCK_SWITCH,
-		.active_low = 0,
-		.desc       = "E6 lock switch",
-		.type       = EV_KEY,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
-	.buttons  = e6_buttons,
-	.nbuttons = ARRAY_SIZE(e6_buttons),
-};
-
-static struct platform_device e6_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &e6_gpio_keys_platform_data,
-	},
-};
-
-static struct i2c_board_info __initdata e6_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *e6_devices[] __initdata = {
-	&e6_gpio_keys,
-};
-
-static void __init e6_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&e6_keypad_platform_data);
-
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(e6_devices));
-}
-
-MACHINE_START(EZX_E6, "Motorola EZX E6")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = e6_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_E2
-static struct i2c_board_info __initdata e2_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *e2_devices[] __initdata = {
-};
-
-static void __init e2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&e2_keypad_platform_data);
-
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(e2_devices));
-}
-
-MACHINE_START(EZX_E2, "Motorola EZX E2")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = e2_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index ab7cdffd7ea8..02fdde7e3e34 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -17,15 +17,18 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/soc/pxa/cpu.h>
+#include <linux/soc/pxa/smemc.h>
+#include <linux/clk/pxa.h>
 
-#include <mach/hardware.h>
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 
-#include <mach/irqs.h>
-#include <mach/reset.h>
-#include <mach/smemc.h>
-#include <mach/pxa3xx-regs.h>
+#include "addr-map.h"
+#include "irqs.h"
+#include "reset.h"
+#include "smemc.h"
+#include "pxa3xx-regs.h"
 
 #include "generic.h"
 #include <clocksource/pxa.h>
@@ -46,28 +49,47 @@ void clear_reset_status(unsigned int mask)
 void __init pxa_timer_init(void)
 {
 	if (cpu_is_pxa25x())
-		pxa25x_clocks_init();
+		pxa25x_clocks_init(io_p2v(0x41300000));
 	if (cpu_is_pxa27x())
-		pxa27x_clocks_init();
+		pxa27x_clocks_init(io_p2v(0x41300000));
 	if (cpu_is_pxa3xx())
-		pxa3xx_clocks_init();
+		pxa3xx_clocks_init(io_p2v(0x41340000), io_p2v(0x41350000));
 	pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000));
 }
 
-/*
- * Get the clock frequency as reflected by CCCR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int get_clk_frequency_khz(int info)
+void pxa_smemc_set_pcmcia_timing(int sock, u32 mcmem, u32 mcatt, u32 mcio)
 {
-	if (cpu_is_pxa25x())
-		return pxa25x_get_clk_frequency_khz(info);
-	else if (cpu_is_pxa27x())
-		return pxa27x_get_clk_frequency_khz(info);
-	return 0;
+	__raw_writel(mcmem, MCMEM(sock));
+	__raw_writel(mcatt, MCATT(sock));
+	__raw_writel(mcio, MCIO(sock));
+}
+EXPORT_SYMBOL_GPL(pxa_smemc_set_pcmcia_timing);
+
+void pxa_smemc_set_pcmcia_socket(int nr)
+{
+	switch (nr) {
+	case 0:
+		__raw_writel(0, MECR);
+		break;
+	case 1:
+		/*
+		 * We have at least one socket, so set MECR:CIT
+		 * (Card Is There)
+		 */
+		__raw_writel(MECR_CIT, MECR);
+		break;
+	case 2:
+		/* Set CIT and MECR:NOS (Number Of Sockets) */
+		__raw_writel(MECR_CIT | MECR_NOS, MECR);
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(pxa_smemc_set_pcmcia_socket);
+
+void __iomem *pxa_smemc_get_mdrefr(void)
+{
+	return MDREFR;
 }
-EXPORT_SYMBOL(get_clk_frequency_khz);
 
 /*
  * Intel PXA2xx internal register mapping.
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 3b7873f8e1f8..7bb1499de4c5 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -10,7 +10,6 @@
 
 struct irq_data;
 
-extern unsigned int get_clk_frequency_khz(int info);
 extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *,
 					     unsigned int));
 extern void __init pxa_map_io(void);
@@ -23,19 +22,16 @@ extern void pxa_timer_init(void);
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
 #define pxa25x_handle_irq icip_handle_irq
-extern int __init pxa25x_clocks_init(void);
 extern void __init pxa25x_init_irq(void);
 extern void __init pxa25x_map_io(void);
 extern void __init pxa26x_init_irq(void);
 
 #define pxa27x_handle_irq ichp_handle_irq
-extern int __init pxa27x_clocks_init(void);
 extern unsigned	pxa27x_get_clk_frequency_khz(int);
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa27x_map_io(void);
 
 #define pxa3xx_handle_irq ichp_handle_irq
-extern int __init pxa3xx_clocks_init(void);
 extern void __init pxa3xx_init_irq(void);
 extern void __init pxa3xx_map_io(void);
 
@@ -71,8 +67,3 @@ extern unsigned pxa25x_get_clk_frequency_khz(int);
 #define pxa27x_get_clk_frequency_khz(x)		(0)
 #endif
 
-#ifdef CONFIG_PXA3xx
-extern unsigned	pxa3xx_get_clk_frequency_khz(int);
-#else
-#define pxa3xx_get_clk_frequency_khz(x)		(0)
-#endif
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 49dd618b10f7..72b08a9bf0fd 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -28,7 +28,6 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <linux/sizes.h>
 
diff --git a/arch/arm/mach-pxa/gumstix.h b/arch/arm/mach-pxa/gumstix.h
index 470250cdee16..9005b3c0aabd 100644
--- a/arch/arm/mach-pxa/gumstix.h
+++ b/arch/arm/mach-pxa/gumstix.h
@@ -3,7 +3,7 @@
  *  arch/arm/mach-pxa/include/mach/gumstix.h
  */
 
-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
 
 /* BTRESET - Reset line to Bluetooth module, active low signal. */
 #define GPIO_GUMSTIX_BTRESET          7
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
deleted file mode 100644
index ece1e71c90a9..000000000000
--- a/arch/arm/mach-pxa/h5000.c
+++ /dev/null
@@ -1,210 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Hardware definitions for HP iPAQ h5xxx Handheld Computers
- *
- * Copyright 2000-2003  Hewlett-Packard Company.
- * Copyright 2002       Jamey Hicks <jamey.hicks@hp.com>
- * Copyright 2004-2005  Phil Blundell <pb@handhelds.org>
- * Copyright 2007-2008  Anton Vorontsov <cbouatmailru@gmail.com>
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/irq.h>
-
-#include "pxa25x.h"
-#include "h5000.h"
-#include "udc.h"
-#include <mach/smemc.h>
-
-#include "generic.h"
-
-/*
- * Flash
- */
-
-static struct mtd_partition h5000_flash0_partitions[] = {
-	{
-		.name = "bootldr",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	{
-		.name = "root",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	},
-};
-
-static struct mtd_partition h5000_flash1_partitions[] = {
-	{
-		.name = "second root",
-		.size = SZ_16M - 0x00040000,
-		.offset = 0,
-	},
-	{
-		.name = "asset",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-		.mask_flags = MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data h5000_flash0_data = {
-	.width = 4,
-	.parts = h5000_flash0_partitions,
-	.nr_parts = ARRAY_SIZE(h5000_flash0_partitions),
-};
-
-static struct physmap_flash_data h5000_flash1_data = {
-	.width = 4,
-	.parts = h5000_flash1_partitions,
-	.nr_parts = ARRAY_SIZE(h5000_flash1_partitions),
-};
-
-static struct resource h5000_flash0_resources = {
-	.start = PXA_CS0_PHYS,
-	.end = PXA_CS0_PHYS + SZ_32M - 1,
-	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct resource h5000_flash1_resources = {
-	.start = PXA_CS0_PHYS + SZ_32M,
-	.end = PXA_CS0_PHYS + SZ_32M + SZ_16M - 1,
-	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct platform_device h5000_flash[] = {
-	{
-		.name = "physmap-flash",
-		.id = 0,
-		.resource = &h5000_flash0_resources,
-		.num_resources = 1,
-		.dev = {
-			.platform_data = &h5000_flash0_data,
-		},
-	},
-	{
-		.name = "physmap-flash",
-		.id = 1,
-		.resource = &h5000_flash1_resources,
-		.num_resources = 1,
-		.dev = {
-			.platform_data = &h5000_flash1_data,
-		},
-	},
-};
-
-/*
- * USB Device Controller
- */
-
-static struct pxa2xx_udc_mach_info h5000_udc_mach_info __initdata = {
-	.gpio_pullup = H5000_GPIO_USB_PULLUP,
-};
-
-/*
- * GPIO setup
- */
-
-static unsigned long h5000_pin_config[] __initdata = {
-	/* Crystal and Clock Signals */
-	GPIO12_32KHz,
-
-	/* SDRAM and Static Memory I/O Signals */
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
-};
-
-/*
- * Localbus setup:
- * CS0: Flash;
- * CS1: MediaQ chip, select 16-bit bus and vlio;
- * CS5: SAMCOP.
- */
-
-static void fix_msc(void)
-{
-	__raw_writel(0x129c24f2, MSC0);
-	__raw_writel(0x7ff424fa, MSC1);
-	__raw_writel(0x7ff47ff4, MSC2);
-
-	__raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
-}
-
-/*
- * Platform devices
- */
-
-static struct platform_device *devices[] __initdata = {
-	&h5000_flash[0],
-	&h5000_flash[1],
-};
-
-static void __init h5000_init(void)
-{
-	fix_msc();
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_udc_info(&h5000_udc_mach_info);
-	platform_add_devices(ARRAY_AND_SIZE(devices));
-}
-
-MACHINE_START(H5400, "HP iPAQ H5000")
-	.atag_offset = 0x100,
-	.map_io = pxa25x_map_io,
-	.nr_irqs = PXA_NR_IRQS,
-	.init_irq = pxa25x_init_irq,
-	.handle_irq = pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine = h5000_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/h5000.h b/arch/arm/mach-pxa/h5000.h
deleted file mode 100644
index 58687e94a0c7..000000000000
--- a/arch/arm/mach-pxa/h5000.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Hardware definitions for HP iPAQ h5xxx Handheld Computers
- *
- * Copyright(20)02 Hewlett-Packard Company.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks
- */
-
-#ifndef __ASM_ARCH_H5000_H
-#define __ASM_ARCH_H5000_H
-
-#include "mfp-pxa25x.h"
-
-/*
- * CPU GPIOs
- */
-
-#define H5000_GPIO_POWER_BUTTON   (0)
-#define H5000_GPIO_RESET_BUTTON_N (1)
-#define H5000_GPIO_OPT_INT        (2)
-#define H5000_GPIO_BACKUP_POWER   (3)
-#define H5000_GPIO_ACTION_BUTTON  (4)
-#define H5000_GPIO_COM_DCD_SOMETHING  (5) /* what is this really ? */
-/* 6 not connected */
-#define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
-/* 8 not connected */
-#define H5000_GPIO_RSO_N          (9)       /* reset output from max1702 which regulates 3.3 and 2.5 */
-#define H5000_GPIO_ASIC_INT_N   (10)       /* from companion asic */
-#define H5000_GPIO_BT_ENV_0     (11)       /* to LMX9814, set to 1 according to regdump */
-/*(12) not connected */
-#define H5000_GPIO_BT_ENV_1     (13)       /* to LMX9814, set to 1 according to regdump */
-#define H5000_GPIO_BT_WU        (14)       /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
-/*(15) is CS1# */
-/*(16) not connected */
-/*(17) not connected */
-/*(18) is pcmcia ready */
-/*(19) is dreq1 */
-/*(20) is dreq0 */
-#define H5000_GPIO_OE_RD_NWR	(21)       /* output enable on rd/nwr signal to companion asic */
-/*(22) is not connected */
-#define H5000_GPIO_OPT_SPI_CLK  (23)       /* to extension pack */
-#define H5000_GPIO_OPT_SPI_CS_N (24)       /* to extension pack */
-#define H5000_GPIO_OPT_SPI_DOUT (25)       /* to extension pack */
-#define H5000_GPIO_OPT_SPI_DIN  (26)       /* to extension pack */
-/*(27) not connected */
-#define H5000_GPIO_I2S_BITCLK   (28)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_DATAOUT  (29)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_DATAIN   (30)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_LRCLK    (31)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_SYSCLK   (32)       /* connected to AC97 codec */
-/*(33) is CS5# */
-#define H5000_GPIO_COM_RXD      (34)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_CTS      (35)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_DCD      (36)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_DSR      (37)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_RI       (38)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_TXD      (39)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_DTR      (40)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_RTS      (41)       /* connected to cradle/cable connector */
-
-#define H5000_GPIO_BT_RXD       (42)       /* connected to BT (LMX9814) */
-#define H5000_GPIO_BT_TXD       (43)       /* connected to BT (LMX9814) */
-#define H5000_GPIO_BT_CTS       (44)       /* connected to BT (LMX9814) */
-#define H5000_GPIO_BT_RTS       (45)       /* connected to BT (LMX9814) */
-
-#define H5000_GPIO_IRDA_RXD     (46)
-#define H5000_GPIO_IRDA_TXD     (47)
-
-#define H5000_GPIO_POE_N        (48)       /* used for pcmcia */
-#define H5000_GPIO_PWE_N        (49)       /* used for pcmcia */
-#define H5000_GPIO_PIOR_N       (50)       /* used for pcmcia */
-#define H5000_GPIO_PIOW_N       (51)       /* used for pcmcia */
-#define H5000_GPIO_PCE1_N       (52)       /* used for pcmcia */
-#define H5000_GPIO_PCE2_N       (53)       /* used for pcmcia */
-#define H5000_GPIO_PSKTSEL      (54)       /* used for pcmcia */
-#define H5000_GPIO_PREG_N       (55)       /* used for pcmcia */
-#define H5000_GPIO_PWAIT_N      (56)       /* used for pcmcia */
-#define H5000_GPIO_IOIS16_N     (57)       /* used for pcmcia */
-
-#define H5000_GPIO_IRDA_SD      (58)       /* to hsdl3002 sd */
-/*(59) not connected */
-#define H5000_GPIO_POWER_SD_N   (60)       /* controls power to SD */
-#define H5000_GPIO_POWER_RS232_N	(61)       /* inverted FORCEON to rs232 transceiver */
-#define H5000_GPIO_POWER_ACCEL_N	(62)       /* controls power to accel */
-/*(63) is not connected */
-#define H5000_GPIO_OPT_NVRAM    (64)       /* controls power to expansion pack */
-#define H5000_GPIO_CHG_EN       (65)       /* to sc801 en */
-#define H5000_GPIO_USB_PULLUP   (66)       /* USB d+ pullup via 1.5K resistor */
-#define H5000_GPIO_BT_2V8_N     (67)       /* 2.8V used by bluetooth */
-#define H5000_GPIO_EXT_CHG_RATE (68)       /* enables external charging rate */
-/*(69) is not connected */
-#define H5000_GPIO_CIR_RESET    (70)       /* consumer IR reset */
-#define H5000_GPIO_POWER_LIGHT_SENSOR_N	(71)
-#define H5000_GPIO_BT_M_RESET   (72)
-#define H5000_GPIO_STD_CHG_RATE (73)
-#define H5000_GPIO_SD_WP_N      (74)
-#define H5000_GPIO_MOTOR_ON_N   (75)       /* external pullup on this */
-#define H5000_GPIO_HEADPHONE_DETECT	(76)
-#define H5000_GPIO_USB_CHG_RATE (77)       /* select rate for charging via usb */
-/*(78) is CS2# */
-/*(79) is CS3# */
-/*(80) is CS4# */
-
-#endif /* __ASM_ARCH_H5000_H */
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
deleted file mode 100644
index 469ffeec6da5..000000000000
--- a/arch/arm/mach-pxa/himalaya.c
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/himalaya.c
- *
- * Hardware definitions for the HTC Himalaya
- *
- * Based on 2.6.21-hh20's himalaya.c and himalaya_lcd.c
- *
- * Copyright (c) 2008 Zbynek Michl <Zbynek.Michl@seznam.cz>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/platform_device.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa25x.h"
-
-#include "generic.h"
-
-/* ---------------------- Himalaya LCD definitions -------------------- */
-
-static struct w100_gen_regs himalaya_lcd_regs = {
-	.lcd_format =        0x00000003,
-	.lcdd_cntl1 =        0x00000000,
-	.lcdd_cntl2 =        0x0003ffff,
-	.genlcd_cntl1 =      0x00fff003,
-	.genlcd_cntl2 =      0x00000003,
-	.genlcd_cntl3 =      0x000102aa,
-};
-
-static struct w100_mode himalaya4_lcd_mode = {
-	.xres 		= 240,
-	.yres 		= 320,
-	.left_margin 	= 0,
-	.right_margin 	= 31,
-	.upper_margin 	= 15,
-	.lower_margin 	= 0,
-	.crtc_ss	= 0x80150014,
-	.crtc_ls	= 0xa0fb00f7,
-	.crtc_gs	= 0xc0080007,
-	.crtc_vpos_gs	= 0x00080007,
-	.crtc_rev	= 0x0000000a,
-	.crtc_dclk	= 0x81700030,
-	.crtc_gclk	= 0x8015010f,
-	.crtc_goe	= 0x00000000,
-	.pll_freq 	= 80,
-	.pixclk_divider = 15,
-	.pixclk_divider_rotated = 15,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 0,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_mode himalaya6_lcd_mode = {
-	.xres 		= 240,
-	.yres 		= 320,
-	.left_margin 	= 9,
-	.right_margin 	= 8,
-	.upper_margin 	= 5,
-	.lower_margin 	= 4,
-	.crtc_ss	= 0x80150014,
-	.crtc_ls	= 0xa0fb00f7,
-	.crtc_gs	= 0xc0080007,
-	.crtc_vpos_gs	= 0x00080007,
-	.crtc_rev	= 0x0000000a,
-	.crtc_dclk	= 0xa1700030,
-	.crtc_gclk	= 0x8015010f,
-	.crtc_goe	= 0x00000000,
-	.pll_freq 	= 95,
-	.pixclk_divider = 0xb,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs himalaya_w100_gpio_info = {
-	.init_data1 = 0xffff0000,	/* GPIO_DATA  */
-	.gpio_dir1  = 0x00000000,	/* GPIO_CNTL1 */
-	.gpio_oe1   = 0x003c0000,	/* GPIO_CNTL2 */
-	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
-	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
-	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
-};
-
-static struct w100fb_mach_info himalaya_fb_info = {
-	.num_modes  = 1,
-	.regs       = &himalaya_lcd_regs,
-	.gpio       = &himalaya_w100_gpio_info,
-	.xtal_freq = 16000000,
-};
-
-static struct resource himalaya_fb_resources[] = {
-	[0] = {
-		.start	= 0x08000000,
-		.end	= 0x08ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device himalaya_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &himalaya_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(himalaya_fb_resources),
-	.resource       = himalaya_fb_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&himalaya_fb_device,
-};
-
-static void __init himalaya_lcd_init(void)
-{
-	int himalaya_boardid;
-
-	himalaya_boardid = 0x4; /* hardcoded (detection needs ASIC3 functions) */
-	printk(KERN_INFO "himalaya LCD Driver init. boardid=%d\n",
-		himalaya_boardid);
-
-	switch (himalaya_boardid) {
-	case 0x4:
-		himalaya_fb_info.modelist = &himalaya4_lcd_mode;
-	break;
-	case 0x6:
-		himalaya_fb_info.modelist = &himalaya6_lcd_mode;
-	break;
-	default:
-		printk(KERN_INFO "himalaya lcd_init: unknown boardid=%d. Using 0x4\n",
-			himalaya_boardid);
-		himalaya_fb_info.modelist = &himalaya4_lcd_mode;
-	}
-}
-
-static void __init himalaya_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	himalaya_lcd_init();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-
-MACHINE_START(HIMALAYA, "HTC Himalaya")
-	.atag_offset = 0x100,
-	.map_io = pxa25x_map_io,
-	.nr_irqs = PXA_NR_IRQS,
-	.init_irq = pxa25x_init_irq,
-	.handle_irq = pxa25x_handle_irq,
-	.init_machine = himalaya_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
deleted file mode 100644
index 1d4c5db54be2..000000000000
--- a/arch/arm/mach-pxa/hx4700.c
+++ /dev/null
@@ -1,920 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support for HP iPAQ hx4700 PDAs.
- *
- * Copyright (c) 2008-2009 Philipp Zabel
- *
- * Based on code:
- *    Copyright (c) 2004 Hewlett-Packard Company.
- *    Copyright (c) 2005 SDG Systems, LLC
- *    Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/input/navpoint.h>
-#include <linux/lcd.h>
-#include <linux/mfd/asic3.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pda_power.h>
-#include <linux/platform_data/gpio-htc-egpio.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max1586.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa27x.h"
-#include <mach/hx4700.h>
-#include <linux/platform_data/irda-pxaficp.h>
-
-#include <sound/ak4641.h>
-#include <video/platform_lcd.h>
-#include <video/w100fb.h>
-
-#include "devices.h"
-#include "generic.h"
-#include "udc.h"
-
-/* Physical address space information */
-
-#define ATI_W3220_PHYS  PXA_CS2_PHYS /* ATI Imageon 3220 Graphics */
-#define ASIC3_PHYS      PXA_CS3_PHYS
-#define ASIC3_SD_PHYS   (PXA_CS3_PHYS + 0x02000000)
-
-static unsigned long hx4700_pin_config[] __initdata = {
-
-	/* SDRAM and Static Memory I/O Signals */
-	GPIO20_nSDCS_2,
-	GPIO21_nSDCS_3,
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,   /* W3220 */
-	GPIO79_nCS_3,   /* ASIC3 */
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,	/* EGPIO, WLAN */
-
-	/* PC CARD */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO85_nPCE_1,
-	GPIO104_PSKTSEL,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* FFUART (RS-232) */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD_LPM_LOW,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS_LPM_LOW,
-
-	/* STUART (IRDA) */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* PWM 1 (Backlight) */
-	GPIO17_PWM1_OUT,
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO113_I2S_SYSCLK,
-
-	/* SSP 1 (NavPoint) */
-	GPIO23_SSP1_SCLK_IN,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* SSP 2 (TSC2046) */
-	GPIO19_SSP2_SCLK,
-	GPIO86_SSP2_RXD,
-	GPIO87_SSP2_TXD,
-	GPIO88_GPIO | MFP_LPM_DRIVE_HIGH,	/* TSC2046_CS */
-
-	/* BQ24022 Regulator */
-	GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT,	/* BQ24022_nCHARGE_EN */
-	GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT,	/* BQ24022_ISET2 */
-
-	/* HX4700 specific input GPIOs */
-	GPIO12_GPIO | WAKEUP_ON_EDGE_RISE,	/* ASIC3_IRQ */
-	GPIO13_GPIO,	/* W3220_IRQ */
-	GPIO14_GPIO,	/* nWLAN_IRQ */
-
-	/* HX4700 specific output GPIOs */
-	GPIO61_GPIO | MFP_LPM_DRIVE_HIGH,	/* W3220_nRESET */
-	GPIO71_GPIO | MFP_LPM_DRIVE_HIGH,	/* ASIC3_nRESET */
-	GPIO81_GPIO | MFP_LPM_DRIVE_HIGH,	/* CPU_GP_nRESET */
-	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* CPU_HW_nRESET */
-	GPIO102_GPIO | MFP_LPM_DRIVE_LOW,	/* SYNAPTICS_POWER_ON */
-
-	GPIO10_GPIO,	/* GSM_IRQ */
-	GPIO13_GPIO,	/* CPLD_IRQ */
-	GPIO107_GPIO,	/* DS1WM_IRQ */
-	GPIO108_GPIO,	/* GSM_READY */
-	GPIO58_GPIO,	/* TSC2046_nPENIRQ */
-	GPIO66_GPIO,	/* nSDIO_IRQ */
-};
-
-/*
- * IRDA
- */
-
-static struct pxaficp_platform_data ficp_info = {
-	.gpio_pwdown		= GPIO105_HX4700_nIR_ON,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/*
- * GPIO Keys
- */
-
-#define INIT_KEY(_code, _gpio, _active_low, _desc)	\
-	{						\
-		.code       = KEY_##_code,		\
-		.gpio       = _gpio,			\
-		.active_low = _active_low,		\
-		.desc       = _desc,			\
-		.type       = EV_KEY,			\
-		.wakeup     = 1,			\
-	}
-
-static struct gpio_keys_button gpio_keys_buttons[] = {
-	INIT_KEY(POWER,       GPIO0_HX4700_nKEY_POWER,   1, "Power button"),
-	INIT_KEY(MAIL,        GPIO94_HX4700_KEY_MAIL,    0, "Mail button"),
-	INIT_KEY(ADDRESSBOOK, GPIO99_HX4700_KEY_CONTACTS,0, "Contacts button"),
-	INIT_KEY(RECORD,      GPIOD6_nKEY_RECORD,        1, "Record button"),
-	INIT_KEY(CALENDAR,    GPIOD1_nKEY_CALENDAR,      1, "Calendar button"),
-	INIT_KEY(HOMEPAGE,    GPIOD3_nKEY_HOME,          1, "Home button"),
-};
-
-static struct gpio_keys_platform_data gpio_keys_data = {
-	.buttons = gpio_keys_buttons,
-	.nbuttons = ARRAY_SIZE(gpio_keys_buttons),
-};
-
-static struct platform_device gpio_keys = {
-	.name = "gpio-keys",
-	.dev  = {
-		.platform_data = &gpio_keys_data,
-	},
-	.id   = -1,
-};
-
-/*
- * Synaptics NavPoint connected to SSP1
- */
-
-static struct navpoint_platform_data navpoint_platform_data = {
-	.port	= 1,
-	.gpio	= GPIO102_HX4700_SYNAPTICS_POWER_ON,
-};
-
-static struct platform_device navpoint = {
-	.name	= "navpoint",
-	.id	= -1,
-	.dev = {
-		.platform_data = &navpoint_platform_data,
-	},
-};
-
-/*
- * ASIC3
- */
-
-static u16 asic3_gpio_config[] = {
-	/* ASIC3 GPIO banks A and B along with some of C and D
-	   implement the buffering for the CF slot. */
-	ASIC3_CONFIG_GPIO(0, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(1, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(2, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(3, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(4, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(5, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(6, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(7, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(8, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(9, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(10, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(11, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(12, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(13, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(14, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(15, 1, 1, 0),
-
-	ASIC3_CONFIG_GPIO(16, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(17, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(18, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(19, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(20, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(21, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(22, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(23, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(24, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(25, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(26, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(27, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(28, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(29, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(30, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(31, 1, 1, 0),
-
-	/* GPIOC - CF, LEDs, SD */
-	ASIC3_GPIOC0_LED0,		/* red */
-	ASIC3_GPIOC1_LED1,		/* green */
-	ASIC3_GPIOC2_LED2,		/* blue */
-	ASIC3_GPIOC5_nCIOW,
-	ASIC3_GPIOC6_nCIOR,
-	ASIC3_GPIOC7_nPCE_1,
-	ASIC3_GPIOC8_nPCE_2,
-	ASIC3_GPIOC9_nPOE,
-	ASIC3_GPIOC10_nPWE,
-	ASIC3_GPIOC11_PSKTSEL,
-	ASIC3_GPIOC12_nPREG,
-	ASIC3_GPIOC13_nPWAIT,
-	ASIC3_GPIOC14_nPIOIS16,
-	ASIC3_GPIOC15_nPIOR,
-
-	/* GPIOD: input GPIOs, CF */
-	ASIC3_GPIOD4_CF_nCD,
-	ASIC3_GPIOD11_nCIOIS16,
-	ASIC3_GPIOD12_nCWAIT,
-	ASIC3_GPIOD15_nPIOW,
-};
-
-static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = {
-	[0] = {
-		.name = "hx4700:amber",
-		.default_trigger = "ds2760-battery.0-charging-blink-full-solid",
-	},
-	[1] = {
-		.name = "hx4700:green",
-		.default_trigger = "unused",
-	},
-	[2] = {
-		.name = "hx4700:blue",
-		.default_trigger = "hx4700-radio",
-	},
-};
-
-static struct resource asic3_resources[] = {
-	/* GPIO part */
-	[0] = DEFINE_RES_MEM(ASIC3_PHYS, ASIC3_MAP_SIZE_16BIT),
-	[1] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ)),
-	/* SD part */
-	[2] = DEFINE_RES_MEM(ASIC3_SD_PHYS, ASIC3_MAP_SIZE_16BIT),
-	[3] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ)),
-};
-
-static struct asic3_platform_data asic3_platform_data = {
-	.gpio_config     = asic3_gpio_config,
-	.gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
-	.irq_base        = IRQ_BOARD_START,
-	.gpio_base       = HX4700_ASIC3_GPIO_BASE,
-	.clock_rate      = 4000000,
-	.leds            = asic3_leds,
-};
-
-static struct platform_device asic3 = {
-	.name          = "asic3",
-	.id            = -1,
-	.resource      = asic3_resources,
-	.num_resources = ARRAY_SIZE(asic3_resources),
-	.dev = {
-		.platform_data = &asic3_platform_data,
-	},
-};
-
-/*
- * EGPIO
- */
-
-static struct resource egpio_resources[] = {
-	[0] = DEFINE_RES_MEM(PXA_CS5_PHYS, 0x4),
-};
-
-static struct htc_egpio_chip egpio_chips[] = {
-	[0] = {
-		.reg_start = 0,
-		.gpio_base = HX4700_EGPIO_BASE,
-		.num_gpios = 8,
-		.direction = HTC_EGPIO_OUTPUT,
-	},
-};
-
-static struct htc_egpio_platform_data egpio_info = {
-	.reg_width = 16,
-	.bus_width = 16,
-	.chip      = egpio_chips,
-	.num_chips = ARRAY_SIZE(egpio_chips),
-};
-
-static struct platform_device egpio = {
-	.name          = "htc-egpio",
-	.id            = -1,
-	.resource      = egpio_resources,
-	.num_resources = ARRAY_SIZE(egpio_resources),
-	.dev = {
-		.platform_data = &egpio_info,
-	},
-};
-
-/*
- * LCD - Sony display connected to ATI Imageon w3220
- */
-
-static void sony_lcd_init(void)
-{
-	gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
-	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
-	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 0);
-	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
-	mdelay(10);
-	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
-	mdelay(20);
-
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1);
-	mdelay(5);
-	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1);
-
-	/* FIXME: init w3220 registers here */
-
-	mdelay(5);
-	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 1);
-	mdelay(10);
-	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 1);
-	mdelay(10);
-	gpio_set_value(GPIO59_HX4700_LCD_PC1, 1);
-	mdelay(10);
-	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 1);
-}
-
-static void sony_lcd_off(void)
-{
-	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
-	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
-	mdelay(10);
-	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 0);
-	mdelay(10);
-	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
-	mdelay(10);
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
-}
-
-#ifdef CONFIG_PM
-static void w3220_lcd_suspend(struct w100fb_par *wfb)
-{
-	sony_lcd_off();
-}
-
-static void w3220_lcd_resume(struct w100fb_par *wfb)
-{
-	sony_lcd_init();
-}
-#else
-#define w3220_lcd_resume	NULL
-#define w3220_lcd_suspend	NULL
-#endif
-
-static struct w100_tg_info w3220_tg_info = {
-	.suspend	= w3220_lcd_suspend,
-	.resume		= w3220_lcd_resume,
-};
-
-/*  				 W3220_VGA		QVGA */
-static struct w100_gen_regs w3220_regs = {
-	.lcd_format =        0x00000003,
-	.lcdd_cntl1 =        0x00000000,
-	.lcdd_cntl2 =        0x0003ffff,
-	.genlcd_cntl1 =      0x00abf003,	/* 0x00fff003 */
-	.genlcd_cntl2 =      0x00000003,
-	.genlcd_cntl3 =      0x000102aa,
-};
-
-static struct w100_mode w3220_modes[] = {
-{
-	.xres 		= 480,
-	.yres 		= 640,
-	.left_margin 	= 15,
-	.right_margin 	= 16,
-	.upper_margin 	= 8,
-	.lower_margin 	= 7,
-	.crtc_ss	= 0x00000000,
-	.crtc_ls	= 0xa1ff01f9,	/* 0x21ff01f9 */
-	.crtc_gs	= 0xc0000000,	/* 0x40000000 */
-	.crtc_vpos_gs	= 0x0000028f,
-	.crtc_ps1_active = 0x00000000,	/* 0x41060010 */
-	.crtc_rev	= 0,
-	.crtc_dclk	= 0x80000000,
-	.crtc_gclk	= 0x040a0104,
-	.crtc_goe	= 0,
-	.pll_freq 	= 95,
-	.pixclk_divider = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 0,
-	.sysclk_src     = CLK_SRC_PLL,
-},
-{
-	.xres 		= 240,
-	.yres 		= 320,
-	.left_margin 	= 9,
-	.right_margin 	= 8,
-	.upper_margin 	= 5,
-	.lower_margin 	= 4,
-	.crtc_ss	= 0x80150014,
-	.crtc_ls        = 0xa0fb00f7,
-	.crtc_gs	= 0xc0080007,
-	.crtc_vpos_gs	= 0x00080007,
-	.crtc_rev	= 0x0000000a,
-	.crtc_dclk	= 0x81700030,
-	.crtc_gclk	= 0x8015010f,
-	.crtc_goe	= 0x00000000,
-	.pll_freq 	= 95,
-	.pixclk_divider = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 0,
-	.sysclk_src     = CLK_SRC_PLL,
-},
-};
-
-struct w100_mem_info w3220_mem_info = {
-	.ext_cntl        = 0x09640011,
-	.sdram_mode_reg  = 0x00600021,
-	.ext_timing_cntl = 0x1a001545,	/* 0x15001545 */
-	.io_cntl         = 0x7ddd7333,
-	.size            = 0x1fffff,
-};
-
-struct w100_bm_mem_info w3220_bm_mem_info = {
-	.ext_mem_bw = 0x50413e01,
-	.offset = 0,
-	.ext_timing_ctl = 0x00043f7f,
-	.ext_cntl = 0x00000010,
-	.mode_reg = 0x00250000,
-	.io_cntl = 0x0fff0000,
-	.config = 0x08301480,
-};
-
-static struct w100_gpio_regs w3220_gpio_info = {
-	.init_data1 = 0xdfe00100,	/* GPIO_DATA */
-	.gpio_dir1  = 0xffff0000,	/* GPIO_CNTL1 */
-	.gpio_oe1   = 0x00000000,	/* GPIO_CNTL2 */
-	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
-	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
-	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
-};
-
-static struct w100fb_mach_info w3220_info = {
-	.tg        = &w3220_tg_info,
-	.mem       = &w3220_mem_info,
-	.bm_mem    = &w3220_bm_mem_info,
-	.gpio      = &w3220_gpio_info,
-	.regs      = &w3220_regs,
-	.modelist  = w3220_modes,
-	.num_modes = 2,
-	.xtal_freq = 16000000,
-};
-
-static struct resource w3220_resources[] = {
-	[0] = DEFINE_RES_MEM(ATI_W3220_PHYS, SZ_16M),
-};
-
-static struct platform_device w3220 = {
-	.name	= "w100fb",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &w3220_info,
-	},
-	.num_resources = ARRAY_SIZE(w3220_resources),
-	.resource      = w3220_resources,
-};
-
-static void hx4700_lcd_set_power(struct plat_lcd_data *pd, unsigned int power)
-{
-	if (power)
-		sony_lcd_init();
-	else
-		sony_lcd_off();
-}
-
-static struct plat_lcd_data hx4700_lcd_data = {
-	.set_power = hx4700_lcd_set_power,
-};
-
-static struct platform_device hx4700_lcd = {
-	.name = "platform-lcd",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &hx4700_lcd_data,
-		.parent        = &w3220.dev,
-	},
-};
-
-/*
- * Backlight
- */
-
-static struct platform_pwm_backlight_data backlight_data = {
-	.max_brightness = 200,
-	.dft_brightness = 100,
-};
-
-static struct platform_device backlight = {
-	.name = "pwm-backlight",
-	.id   = -1,
-	.dev  = {
-		.parent        = &pxa27x_device_pwm1.dev,
-		.platform_data = &backlight_data,
-	},
-};
-
-static struct pwm_lookup hx4700_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL,
-		   30923, PWM_POLARITY_NORMAL),
-};
-
-/*
- * USB "Transceiver"
- */
-
-static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		/* This GPIO is on ASIC3 */
-		GPIO_LOOKUP("asic3",
-			    /* Convert to a local offset on the ASIC3 */
-			    GPIOD14_nUSBC_DETECT - HX4700_ASIC3_GPIO_BASE,
-			    "vbus", GPIO_ACTIVE_LOW),
-		/* This one is on the primary SOC GPIO */
-		GPIO_LOOKUP("gpio-pxa", GPIO76_HX4700_USBC_PUEN,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device gpio_vbus = {
-	.name          = "gpio-vbus",
-	.id            = -1,
-};
-
-static struct pxa2xx_udc_mach_info hx4700_udc_info;
-
-/*
- * Touchscreen - TSC2046 connected to SSP2
- */
-
-static const struct ads7846_platform_data tsc2046_info = {
-	.model            = 7846,
-	.vref_delay_usecs = 100,
-	.pressure_max     = 1024,
-	.debounce_max     = 10,
-	.debounce_tol     = 3,
-	.debounce_rep     = 1,
-	.gpio_pendown     = GPIO58_HX4700_TSC2046_nPENIRQ,
-};
-
-static struct pxa2xx_spi_chip tsc2046_chip = {
-	.tx_threshold = 1,
-	.rx_threshold = 2,
-	.timeout      = 64,
-	.gpio_cs      = GPIO88_HX4700_TSC2046_CS,
-};
-
-static struct spi_board_info tsc2046_board_info[] __initdata = {
-	{
-		.modalias        = "ads7846",
-		.bus_num         = 2,
-		.max_speed_hz    = 2600000, /* 100 kHz sample rate */
-		.irq             = PXA_GPIO_TO_IRQ(GPIO58_HX4700_TSC2046_nPENIRQ),
-		.platform_data   = &tsc2046_info,
-		.controller_data = &tsc2046_chip,
-	},
-};
-
-static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
-	.num_chipselect = 1,
-	.enable_dma     = 1,
-};
-
-/*
- * External power
- */
-
-static int power_supply_init(struct device *dev)
-{
-	return gpio_request(GPIOD9_nAC_IN, "AC charger detect");
-}
-
-static int hx4700_is_ac_online(void)
-{
-	return !gpio_get_value(GPIOD9_nAC_IN);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIOD9_nAC_IN);
-}
-
-static char *hx4700_supplicants[] = {
-	"ds2760-battery.0", "backup-battery"
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = hx4700_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = hx4700_supplicants,
-	.num_supplicants = ARRAY_SIZE(hx4700_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), 1, "ac",
-		IORESOURCE_IRQ |
-		IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE),
-	[1] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), 1, "usb",
-		IORESOURCE_IRQ |
-		IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-	.resource      = power_supply_resources,
-	.num_resources = ARRAY_SIZE(power_supply_resources),
-};
-
-/*
- * Battery charger
- */
-
-static struct regulator_consumer_supply bq24022_consumers[] = {
-	REGULATOR_SUPPLY("vbus_draw", NULL),
-	REGULATOR_SUPPLY("ac_draw", NULL),
-};
-
-static struct regulator_init_data bq24022_init_data = {
-	.constraints = {
-		.max_uA         = 500000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
-	.consumer_supplies      = bq24022_consumers,
-};
-
-static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW };
-
-static struct gpio_regulator_state bq24022_states[] = {
-	{ .value = 100000, .gpios = (0 << 0) },
-	{ .value = 500000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config bq24022_info = {
-	.supply_name = "bq24022",
-
-	.enabled_at_boot = 0,
-
-	.gflags = bq24022_gpiod_gflags,
-	.ngpios = ARRAY_SIZE(bq24022_gpiod_gflags),
-
-	.states = bq24022_states,
-	.nr_states = ARRAY_SIZE(bq24022_states),
-
-	.type = REGULATOR_CURRENT,
-	.init_data = &bq24022_init_data,
-};
-
-static struct platform_device bq24022 = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &bq24022_info,
-	},
-};
-
-static struct gpiod_lookup_table bq24022_gpiod_table = {
-	.dev_id = "gpio-regulator",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO96_HX4700_BQ24022_ISET2,
-			    NULL, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO72_HX4700_BQ24022_nCHARGE_EN,
-			    "enable", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/*
- * StrataFlash
- */
-
-static void hx4700_set_vpp(struct platform_device *pdev, int vpp)
-{
-	gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
-}
-
-static struct resource strataflash_resource[] = {
-	[0] = DEFINE_RES_MEM(PXA_CS0_PHYS, SZ_64M),
-	[1] = DEFINE_RES_MEM(PXA_CS0_PHYS + SZ_64M, SZ_64M),
-};
-
-static struct physmap_flash_data strataflash_data = {
-	.width = 4,
-	.set_vpp = hx4700_set_vpp,
-};
-
-static struct platform_device strataflash = {
-	.name          = "physmap-flash",
-	.id            = -1,
-	.resource      = strataflash_resource,
-	.num_resources = ARRAY_SIZE(strataflash_resource),
-	.dev = {
-		.platform_data = &strataflash_data,
-	},
-};
-
-/*
- * Maxim MAX1587A on PI2C
- */
-
-static struct regulator_consumer_supply max1587a_consumer =
-	REGULATOR_SUPPLY("vcc_core", NULL);
-
-static struct regulator_init_data max1587a_v3_info = {
-	.constraints = {
-		.name = "vcc_core range",
-		.min_uV =  900000,
-		.max_uV = 1705000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = 1,
-	.consumer_supplies     = &max1587a_consumer,
-};
-
-static struct max1586_subdev_data max1587a_subdev = {
-	.name = "vcc_core",
-	.id   = MAX1586_V3,
-	.platform_data = &max1587a_v3_info,
-};
-
-static struct max1586_platform_data max1587a_info = {
-	.num_subdevs = 1,
-	.subdevs     = &max1587a_subdev,
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data = &max1587a_info,
-	},
-};
-
-/*
- * Asahi Kasei AK4641 on I2C
- */
-
-static struct ak4641_platform_data ak4641_info = {
-	.gpio_power = GPIO27_HX4700_CODEC_ON,
-	.gpio_npdn  = GPIO109_HX4700_CODEC_nPDN,
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("ak4641", 0x12),
-		.platform_data = &ak4641_info,
-	},
-};
-
-static struct platform_device audio = {
-	.name	= "hx4700-audio",
-	.id	= -1,
-};
-
-
-/*
- * Platform devices
- */
-
-static struct platform_device *devices[] __initdata = {
-	&asic3,
-	&gpio_keys,
-	&navpoint,
-	&backlight,
-	&w3220,
-	&hx4700_lcd,
-	&egpio,
-	&bq24022,
-	&gpio_vbus,
-	&power_supply,
-	&strataflash,
-	&audio,
-};
-
-static struct gpio global_gpios[] = {
-	{ GPIO12_HX4700_ASIC3_IRQ, GPIOF_IN, "ASIC3_IRQ" },
-	{ GPIO13_HX4700_W3220_IRQ, GPIOF_IN, "W3220_IRQ" },
-	{ GPIO14_HX4700_nWLAN_IRQ, GPIOF_IN, "WLAN_IRQ" },
-	{ GPIO59_HX4700_LCD_PC1,          GPIOF_OUT_INIT_HIGH, "LCD_PC1" },
-	{ GPIO62_HX4700_LCD_nRESET,       GPIOF_OUT_INIT_HIGH, "LCD_RESET" },
-	{ GPIO70_HX4700_LCD_SLIN1,        GPIOF_OUT_INIT_HIGH, "LCD_SLIN1" },
-	{ GPIO84_HX4700_LCD_SQN,          GPIOF_OUT_INIT_HIGH, "LCD_SQN" },
-	{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
-	{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
-	{ GPIO32_HX4700_RS232_ON,         GPIOF_OUT_INIT_HIGH, "RS232_ON" },
-	{ GPIO61_HX4700_W3220_nRESET,     GPIOF_OUT_INIT_HIGH, "W3220_nRESET" },
-	{ GPIO71_HX4700_ASIC3_nRESET,     GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
-	{ GPIO81_HX4700_CPU_GP_nRESET,    GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" },
-	{ GPIO82_HX4700_EUART_RESET,      GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
-	{ GPIO116_HX4700_CPU_HW_nRESET,   GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" },
-};
-
-static void __init hx4700_init(void)
-{
-	int ret;
-
-	PCFR = PCFR_GPR_EN | PCFR_OPDE;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
-	gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
-	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
-	if (ret)
-		pr_err ("hx4700: Failed to request GPIOs.\n");
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	gpiod_add_lookup_table(&bq24022_gpiod_table);
-	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
-
-	pxa_set_ficp_info(&ficp_info);
-	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
-	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
-	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
-	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
-
-	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
-	mdelay(10);
-	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
-	mdelay(10);
-
-	pxa_set_udc_info(&hx4700_udc_info);
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(H4700, "HP iPAQ HX4700")
-	.atag_offset  = 0x100,
-	.map_io       = pxa27x_map_io,
-	.nr_irqs      = HX4700_NR_IRQS,
-	.init_irq     = pxa27x_init_irq,
-	.handle_irq     = pxa27x_handle_irq,
-	.init_machine = hx4700_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
deleted file mode 100644
index 151e26ec0696..000000000000
--- a/arch/arm/mach-pxa/icontrol.c
+++ /dev/null
@@ -1,198 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/icontrol.c
- *
- * Support for the iControl and SafeTcam platforms from TMT Services
- * using the Embedian MXM-8x10 Computer on Module
- *
- * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
- *
- * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za>
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/property.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa320.h"
-#include "mxm8x10.h"
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/regulator/machine.h>
-
-#include "generic.h"
-
-#define ICONTROL_MCP251x_nCS1	(15)
-#define ICONTROL_MCP251x_nCS2	(16)
-#define ICONTROL_MCP251x_nCS3	(17)
-#define ICONTROL_MCP251x_nCS4	(24)
-
-#define ICONTROL_MCP251x_nIRQ1	(74)
-#define ICONTROL_MCP251x_nIRQ2	(75)
-#define ICONTROL_MCP251x_nIRQ3	(76)
-#define ICONTROL_MCP251x_nIRQ4	(77)
-
-static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS1
-};
-
-static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS2
-};
-
-static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS3
-};
-
-static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS4
-};
-
-static const struct property_entry mcp251x_properties[] = {
-	PROPERTY_ENTRY_U32("clock-frequency", 16000000),
-	{}
-};
-
-static struct spi_board_info mcp251x_board_info[] = {
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 3,
-		.chip_select     = 0,
-		.properties      = mcp251x_properties,
-		.controller_data = &mcp251x_chip_info1,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1)
-	},
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 3,
-		.chip_select     = 1,
-		.properties      = mcp251x_properties,
-		.controller_data = &mcp251x_chip_info2,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2)
-	},
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 4,
-		.chip_select     = 0,
-		.properties      = mcp251x_properties,
-		.controller_data = &mcp251x_chip_info3,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3)
-	},
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 4,
-		.chip_select     = 1,
-		.properties      = mcp251x_properties,
-		.controller_data = &mcp251x_chip_info4,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4)
-	}
-};
-
-static struct pxa2xx_spi_controller pxa_ssp3_spi_master_info = {
-	.num_chipselect = 2,
-	.enable_dma     = 1
-};
-
-static struct pxa2xx_spi_controller pxa_ssp4_spi_master_info = {
-	.num_chipselect = 2,
-	.enable_dma     = 1
-};
-
-struct platform_device pxa_spi_ssp3 = {
-	.name          = "pxa2xx-spi",
-	.id            = 3,
-	.dev           = {
-		.platform_data = &pxa_ssp3_spi_master_info,
-	}
-};
-
-struct platform_device pxa_spi_ssp4 = {
-	.name          = "pxa2xx-spi",
-	.id            = 4,
-	.dev           = {
-		.platform_data = &pxa_ssp4_spi_master_info,
-	}
-};
-
-static struct platform_device *icontrol_spi_devices[] __initdata = {
-	&pxa_spi_ssp3,
-	&pxa_spi_ssp4,
-};
-
-static mfp_cfg_t mfp_can_cfg[] __initdata = {
-	/* CAN CS lines */
-	GPIO15_GPIO,
-	GPIO16_GPIO,
-	GPIO17_GPIO,
-	GPIO24_GPIO,
-
-	/* SPI (SSP3) lines */
-	GPIO89_SSP3_SCLK,
-	GPIO91_SSP3_TXD,
-	GPIO92_SSP3_RXD,
-
-	/* SPI (SSP4) lines */
-	GPIO93_SSP4_SCLK,
-	GPIO95_SSP4_TXD,
-	GPIO96_SSP4_RXD,
-
-	/* CAN nIRQ lines */
-	GPIO74_GPIO | MFP_LPM_EDGE_RISE,
-	GPIO75_GPIO | MFP_LPM_EDGE_RISE,
-	GPIO76_GPIO | MFP_LPM_EDGE_RISE,
-	GPIO77_GPIO | MFP_LPM_EDGE_RISE
-};
-
-static void __init icontrol_can_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg));
-	platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices));
-	spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info));
-}
-
-static void __init icontrol_init(void)
-{
-	mxm_8x10_barebones_init();
-	mxm_8x10_usb_host_init();
-	mxm_8x10_mmc_init();
-
-	icontrol_can_init();
-
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= icontrol_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
deleted file mode 100644
index fb0850af8496..000000000000
--- a/arch/arm/mach-pxa/idp.c
+++ /dev/null
@@ -1,287 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/idp.c
- *
- *  Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
- *
- *  2001-09-13: Cliff Brake <cbrake@accelent.com>
- *              Initial code
- *
- *  2005-02-15: Cliff Brake <cliff.brake@gmail.com>
- *  		<http://www.vibren.com> <http://bec-systems.com>
- *              Updated for 2.6 kernel
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa25x.h"
-#include "idp.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <mach/bitfield.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/smc91x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/* TODO:
- * - add pxa2xx_audio_ops_t device structure
- * - Ethernet interrupt
- */
-
-static unsigned long idp_pin_config[] __initdata = {
-	/* LCD */
-	GPIOxx_LCD_DSTN_16BPP,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* Ethernet */
-	GPIO33_nCS_5,	/* Ethernet CS */
-	GPIO4_GPIO,	/* Ethernet IRQ */
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (IDP_ETH_PHYS + 0x300),
-		.end	= (IDP_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(4),
-		.end	= PXA_GPIO_TO_IRQ(4),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
-		 SMC91X_USE_DMA | SMC91X_NOWAIT,
-	.pxa_u16_align4 = true,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev.platform_data = &smc91x_platdata,
-};
-
-static void idp_backlight_power(int on)
-{
-	if (on) {
-		IDP_CPLD_LCD |= (1<<1);
-	} else {
-		IDP_CPLD_LCD &= ~(1<<1);
-	}
-}
-
-static void idp_vlcd(int on)
-{
-	if (on) {
-		IDP_CPLD_LCD |= (1<<2);
-	} else {
-		IDP_CPLD_LCD &= ~(1<<2);
-	}
-}
-
-static void idp_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on) {
-		IDP_CPLD_LCD |= (1<<0);
-	} else {
-		IDP_CPLD_LCD &= ~(1<<0);
-	}
-
-	/* call idp_vlcd for now as core driver does not support
-	 * both power and vlcd hooks.  Note, this is not technically
-	 * the correct sequence, but seems to work.  Disclaimer:
-	 * this may eventually damage the display.
-	 */
-
-	idp_vlcd(on);
-}
-
-static struct pxafb_mode_info sharp_lm8v31_mode = {
-	.pixclock	= 270000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 3,
-	.right_margin	= 3,
-	.vsync_len	= 1,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info sharp_lm8v31 = {
-	.modes          = &sharp_lm8v31_mode,
-	.num_modes      = 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
-			  LCD_AC_BIAS_FREQ(255),
-	.pxafb_backlight_power = &idp_backlight_power,
-	.pxafb_lcd_power = &idp_lcd_power
-};
-
-static struct pxamci_platform_data idp_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-static void __init idp_init(void)
-{
-	printk("idp_init()\n");
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_device_register(&smc91x_device);
-	//platform_device_register(&mst_audio_device);
-	pxa_set_fb_info(NULL, &sharp_lm8v31);
-	pxa_set_mci_info(&idp_mci_platform_data);
-}
-
-static struct map_desc idp_io_desc[] __initdata = {
-  	{
-		.virtual	=  IDP_COREVOLT_VIRT,
-		.pfn		= __phys_to_pfn(IDP_COREVOLT_PHYS),
-		.length		= IDP_COREVOLT_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IDP_CPLD_VIRT,
-		.pfn		= __phys_to_pfn(IDP_CPLD_PHYS),
-		.length		= IDP_CPLD_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init idp_map_io(void)
-{
-	pxa25x_map_io();
-	iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
-}
-
-/* LEDs */
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct idp_led {
-	struct led_classdev     cdev;
-	u8                      mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} idp_leds[] = {
-	{ "idp:green", "heartbeat", },
-	{ "idp:red", "cpu0", },
-};
-
-static void idp_led_set(struct led_classdev *cdev,
-		enum led_brightness b)
-{
-	struct idp_led *led = container_of(cdev,
-			struct idp_led, cdev);
-	u32 reg = IDP_CPLD_LED_CONTROL;
-
-	if (b != LED_OFF)
-		reg &= ~led->mask;
-	else
-		reg |= led->mask;
-
-	IDP_CPLD_LED_CONTROL = reg;
-}
-
-static enum led_brightness idp_led_get(struct led_classdev *cdev)
-{
-	struct idp_led *led = container_of(cdev,
-			struct idp_led, cdev);
-
-	return (IDP_CPLD_LED_CONTROL & led->mask) ? LED_OFF : LED_FULL;
-}
-
-static int __init idp_leds_init(void)
-{
-	int i;
-
-	if (!machine_is_pxa_idp())
-		return -ENODEV;
-
-	for (i = 0; i < ARRAY_SIZE(idp_leds); i++) {
-		struct idp_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = idp_leds[i].name;
-		led->cdev.brightness_set = idp_led_set;
-		led->cdev.brightness_get = idp_led_get;
-		led->cdev.default_trigger = idp_leds[i].trigger;
-
-		if (i == 0)
-			led->mask = IDP_HB_LED;
-		else
-			led->mask = IDP_BUSY_LED;
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(idp_leds_init);
-#endif
-
-MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
-	/* Maintainer: Vibren Technologies */
-	.map_io		= idp_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= idp_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.h b/arch/arm/mach-pxa/idp.h
deleted file mode 100644
index a89e6723b1a1..000000000000
--- a/arch/arm/mach-pxa/idp.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-pxa/include/mach/idp.h
- *
- * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
- *
- * 2001-09-13: Cliff Brake <cbrake@accelent.com>
- *             Initial code
- *
- * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
- *             <http://www.vibren.com> <http://bec-systems.com>
- *             Changes for 2.6 kernel.
- */
-
-
-/*
- * Note: this file must be safe to include in assembly files
- *
- * Support for the Vibren PXA255 IDP requires rev04 or later
- * IDP hardware.
- */
-
-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
-
-#define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
-#define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
-#define IDP_MEDIAQ_PHYS		(PXA_CS3_PHYS)
-#define IDP_IDE_PHYS		(PXA_CS5_PHYS + 0x03000000)
-#define IDP_ETH_PHYS		(PXA_CS5_PHYS + 0x03400000)
-#define IDP_COREVOLT_PHYS	(PXA_CS5_PHYS + 0x03800000)
-#define IDP_CPLD_PHYS		(PXA_CS5_PHYS + 0x03C00000)
-
-
-/*
- * virtual memory map
- */
-
-#define IDP_COREVOLT_VIRT	(0xf0000000)
-#define IDP_COREVOLT_SIZE	(1*1024*1024)
-
-#define IDP_CPLD_VIRT		(IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
-#define IDP_CPLD_SIZE		(1*1024*1024)
-
-#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
-#error Your custom IO space is getting a bit large !!
-#endif
-
-#define CPLD_P2V(x)		((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
-#define CPLD_V2P(x)		((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __CPLD_REG(x)		(*((volatile unsigned long *)CPLD_P2V(x)))
-#else
-#  define __CPLD_REG(x)		CPLD_P2V(x)
-#endif
-
-/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
-
-#define _IDP_CPLD_REV			(IDP_CPLD_PHYS + 0x00)
-#define _IDP_CPLD_PERIPH_PWR		(IDP_CPLD_PHYS + 0x04)
-#define _IDP_CPLD_LED_CONTROL		(IDP_CPLD_PHYS + 0x08)
-#define _IDP_CPLD_KB_COL_HIGH		(IDP_CPLD_PHYS + 0x0C)
-#define _IDP_CPLD_KB_COL_LOW		(IDP_CPLD_PHYS + 0x10)
-#define _IDP_CPLD_PCCARD_EN		(IDP_CPLD_PHYS + 0x14)
-#define _IDP_CPLD_GPIOH_DIR		(IDP_CPLD_PHYS + 0x18)
-#define _IDP_CPLD_GPIOH_VALUE		(IDP_CPLD_PHYS + 0x1C)
-#define _IDP_CPLD_GPIOL_DIR		(IDP_CPLD_PHYS + 0x20)
-#define _IDP_CPLD_GPIOL_VALUE		(IDP_CPLD_PHYS + 0x24)
-#define _IDP_CPLD_PCCARD_PWR		(IDP_CPLD_PHYS + 0x28)
-#define _IDP_CPLD_MISC_CTRL		(IDP_CPLD_PHYS + 0x2C)
-#define _IDP_CPLD_LCD			(IDP_CPLD_PHYS + 0x30)
-#define _IDP_CPLD_FLASH_WE		(IDP_CPLD_PHYS + 0x34)
-
-#define _IDP_CPLD_KB_ROW		(IDP_CPLD_PHYS + 0x50)
-#define _IDP_CPLD_PCCARD0_STATUS	(IDP_CPLD_PHYS + 0x54)
-#define _IDP_CPLD_PCCARD1_STATUS	(IDP_CPLD_PHYS + 0x58)
-#define _IDP_CPLD_MISC_STATUS		(IDP_CPLD_PHYS + 0x5C)
-
-/* FPGA register virtual addresses */
-
-#define IDP_CPLD_REV			__CPLD_REG(_IDP_CPLD_REV)
-#define IDP_CPLD_PERIPH_PWR		__CPLD_REG(_IDP_CPLD_PERIPH_PWR)
-#define IDP_CPLD_LED_CONTROL		__CPLD_REG(_IDP_CPLD_LED_CONTROL)
-#define IDP_CPLD_KB_COL_HIGH		__CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
-#define IDP_CPLD_KB_COL_LOW		__CPLD_REG(_IDP_CPLD_KB_COL_LOW)
-#define IDP_CPLD_PCCARD_EN		__CPLD_REG(_IDP_CPLD_PCCARD_EN)
-#define IDP_CPLD_GPIOH_DIR		__CPLD_REG(_IDP_CPLD_GPIOH_DIR)
-#define IDP_CPLD_GPIOH_VALUE		__CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
-#define IDP_CPLD_GPIOL_DIR		__CPLD_REG(_IDP_CPLD_GPIOL_DIR)
-#define IDP_CPLD_GPIOL_VALUE		__CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
-#define IDP_CPLD_PCCARD_PWR		__CPLD_REG(_IDP_CPLD_PCCARD_PWR)
-#define IDP_CPLD_MISC_CTRL		__CPLD_REG(_IDP_CPLD_MISC_CTRL)
-#define IDP_CPLD_LCD			__CPLD_REG(_IDP_CPLD_LCD)
-#define IDP_CPLD_FLASH_WE		__CPLD_REG(_IDP_CPLD_FLASH_WE)
-
-#define IDP_CPLD_KB_ROW		        __CPLD_REG(_IDP_CPLD_KB_ROW)
-#define IDP_CPLD_PCCARD0_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
-#define IDP_CPLD_PCCARD1_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
-#define IDP_CPLD_MISC_STATUS		__CPLD_REG(_IDP_CPLD_MISC_STATUS)
-
-
-/*
- * Bit masks for various registers
- */
-
-// IDP_CPLD_PCCARD_PWR
-#define PCC0_PWR0	(1 << 0)
-#define PCC0_PWR1	(1 << 1)
-#define PCC0_PWR2	(1 << 2)
-#define PCC0_PWR3	(1 << 3)
-#define PCC1_PWR0	(1 << 4)
-#define PCC1_PWR1	(1 << 5)
-#define PCC1_PWR2	(1 << 6)
-#define PCC1_PWR3	(1 << 7)
-
-// IDP_CPLD_PCCARD_EN
-#define PCC0_RESET	(1 << 6)
-#define PCC1_RESET	(1 << 7)
-#define PCC0_ENABLE	(1 << 0)
-#define PCC1_ENABLE	(1 << 1)
-
-// IDP_CPLD_PCCARDx_STATUS
-#define _PCC_WRPROT	(1 << 7) // 7-4 read as low true
-#define _PCC_RESET	(1 << 6)
-#define _PCC_IRQ	(1 << 5)
-#define _PCC_INPACK	(1 << 4)
-#define PCC_BVD2	(1 << 3)
-#define PCC_BVD1	(1 << 2)
-#define PCC_VS2		(1 << 1)
-#define PCC_VS1		(1 << 0)
-
-/* A listing of interrupts used by external hardware devices */
-
-#define TOUCH_PANEL_IRQ			PXA_GPIO_TO_IRQ(5)
-#define IDE_IRQ				PXA_GPIO_TO_IRQ(21)
-
-#define TOUCH_PANEL_IRQ_EDGE		IRQ_TYPE_EDGE_FALLING
-
-#define ETHERNET_IRQ			PXA_GPIO_TO_IRQ(4)
-#define ETHERNET_IRQ_EDGE		IRQ_TYPE_EDGE_RISING
-
-#define IDE_IRQ_EDGE			IRQ_TYPE_EDGE_RISING
-
-#define PCMCIA_S0_CD_VALID		PXA_GPIO_TO_IRQ(7)
-#define PCMCIA_S0_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
-
-#define PCMCIA_S1_CD_VALID		PXA_GPIO_TO_IRQ(8)
-#define PCMCIA_S1_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
-
-#define PCMCIA_S0_RDYINT		PXA_GPIO_TO_IRQ(19)
-#define PCMCIA_S1_RDYINT		PXA_GPIO_TO_IRQ(22)
-
-
-/*
- * Macros for LED Driver
- */
-
-/* leds 0 = ON */
-#define IDP_HB_LED	(1<<5)
-#define IDP_BUSY_LED	(1<<6)
-
-#define IDP_LEDS_MASK	(IDP_HB_LED | IDP_BUSY_LED)
-
-/*
- * macros for MTD driver
- */
-
-#define FLASH_WRITE_PROTECT_DISABLE()	((IDP_CPLD_FLASH_WE) &= ~(0x1))
-#define FLASH_WRITE_PROTECT_ENABLE()	((IDP_CPLD_FLASH_WE) |= (0x1))
-
-/*
- * macros for matrix keyboard driver
- */
-
-#define KEYBD_MATRIX_NUMBER_INPUTS	7
-#define KEYBD_MATRIX_NUMBER_OUTPUTS	14
-
-#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC	FALSE
-#define KEYBD_MATRIX_INVERT_INPUT_LOGIC		FALSE
-
-#define KEYBD_MATRIX_SETTLING_TIME_US			100
-#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT		2
-
-#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
-{\
-	IDP_CPLD_KB_COL_LOW = outputs;\
-	IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
-}
-
-#define KEYBD_MATRIX_GET_INPUTS(inputs) \
-{\
-	inputs = (IDP_CPLD_KB_ROW & 0x7f);\
-}
-
-
diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
deleted file mode 100644
index 7beebf7297b5..000000000000
--- a/arch/arm/mach-pxa/include/mach/audio.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_AUDIO_H__
-#define __ASM_ARCH_AUDIO_H__
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/ac97_codec.h>
-
-/*
- * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
- *              a -1 value means no gpio will be used for reset
- * @codec_pdata: AC97 codec platform_data
-
- * reset_gpio should only be specified for pxa27x CPUs where a silicon
- * bug prevents correct operation of the reset line. If not specified,
- * the default behaviour on these CPUs is to consider gpio 113 as the
- * AC97 reset line, which is the default on most boards.
- */
-typedef struct {
-	int (*startup)(struct snd_pcm_substream *, void *);
-	void (*shutdown)(struct snd_pcm_substream *, void *);
-	void (*suspend)(void *);
-	void (*resume)(void *);
-	void *priv;
-	int reset_gpio;
-	void *codec_pdata[AC97_BUS_MAX_DEVICES];
-} pxa2xx_audio_ops_t;
-
-extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
deleted file mode 100644
index 04f3639c4082..000000000000
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  linux/include/asm-arm/arch-pxa/balloon3.h
- *
- *  Authors:	Nick Bane and Wookey
- *  Created:	Oct, 2005
- *  Copyright:	Toby Churchill Ltd
- *  Cribbed from mainstone.c, by Nicholas Pitre
- */
-
-#ifndef ASM_ARCH_BALLOON3_H
-#define ASM_ARCH_BALLOON3_H
-
-#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
-
-enum balloon3_features {
-	BALLOON3_FEATURE_OHCI,
-	BALLOON3_FEATURE_MMC,
-	BALLOON3_FEATURE_CF,
-	BALLOON3_FEATURE_AUDIO,
-	BALLOON3_FEATURE_TOPPOLY,
-};
-
-#define BALLOON3_FPGA_PHYS	PXA_CS4_PHYS
-#define BALLOON3_FPGA_VIRT	IOMEM(0xf1000000)	/* as per balloon2 */
-#define BALLOON3_FPGA_LENGTH	0x01000000
-
-#define	BALLOON3_FPGA_SETnCLR		(0x1000)
-
-/* FPGA / CPLD registers for CF socket */
-#define	BALLOON3_CF_STATUS_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
-#define	BALLOON3_CF_CONTROL_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
-/* FPGA / CPLD version register */
-#define	BALLOON3_FPGA_VER		(BALLOON3_FPGA_VIRT + 0x00e0001c)
-/* FPGA / CPLD registers for NAND flash */
-#define	BALLOON3_NAND_BASE		(PXA_CS4_PHYS + 0x00e00000)
-#define	BALLOON3_NAND_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
-#define	BALLOON3_NAND_CONTROL2_REG	(BALLOON3_FPGA_VIRT + 0x00e00010)
-#define	BALLOON3_NAND_STAT_REG		(BALLOON3_FPGA_VIRT + 0x00e00014)
-#define	BALLOON3_NAND_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e00014)
-
-/* fpga/cpld interrupt control register */
-#define BALLOON3_INT_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e0000C)
-#define BALLOON3_VERSION_REG		(BALLOON3_FPGA_VIRT + 0x00e0001c)
-
-#define BALLOON3_SAMOSA_ADDR_REG	(BALLOON3_FPGA_VIRT + 0x00c00000)
-#define BALLOON3_SAMOSA_DATA_REG	(BALLOON3_FPGA_VIRT + 0x00c00004)
-#define BALLOON3_SAMOSA_STATUS_REG	(BALLOON3_FPGA_VIRT + 0x00c0001c)
-
-/* CF Status Register bits (read-only) bits */
-#define BALLOON3_CF_nIRQ		(1 << 0)
-#define BALLOON3_CF_nSTSCHG_BVD1	(1 << 1)
-
-/* CF Control Set Register bits / CF Control Clear Register bits (write-only) */
-#define BALLOON3_CF_RESET		(1 << 0)
-#define BALLOON3_CF_ENABLE		(1 << 1)
-#define BALLOON3_CF_ADD_ENABLE		(1 << 2)
-
-/* CF Interrupt sources */
-#define BALLOON3_BP_CF_NRDY_IRQ		BALLOON3_IRQ(0)
-#define BALLOON3_BP_NSTSCHG_IRQ		BALLOON3_IRQ(1)
-
-/* NAND Control register */
-#define	BALLOON3_NAND_CONTROL_FLWP	(1 << 7)
-#define	BALLOON3_NAND_CONTROL_FLSE	(1 << 6)
-#define	BALLOON3_NAND_CONTROL_FLCE3	(1 << 5)
-#define	BALLOON3_NAND_CONTROL_FLCE2	(1 << 4)
-#define	BALLOON3_NAND_CONTROL_FLCE1	(1 << 3)
-#define	BALLOON3_NAND_CONTROL_FLCE0	(1 << 2)
-#define	BALLOON3_NAND_CONTROL_FLALE	(1 << 1)
-#define	BALLOON3_NAND_CONTROL_FLCLE	(1 << 0)
-
-/* NAND Status register */
-#define	BALLOON3_NAND_STAT_RNB		(1 << 0)
-
-/* NAND Control2 register */
-#define	BALLOON3_NAND_CONTROL2_16BIT	(1 << 0)
-
-/* GPIOs for irqs */
-#define BALLOON3_GPIO_AUX_NIRQ		(94)
-#define BALLOON3_GPIO_CODEC_IRQ		(95)
-
-/* Timer and Idle LED locations */
-#define BALLOON3_GPIO_LED_NAND		(9)
-#define BALLOON3_GPIO_LED_IDLE		(10)
-
-/* backlight control */
-#define BALLOON3_GPIO_RUN_BACKLIGHT	(99)
-
-#define BALLOON3_GPIO_S0_CD		(105)
-
-/* NAND */
-#define BALLOON3_GPIO_RUN_NAND		(102)
-
-/* PCF8574A Leds */
-#define	BALLOON3_PCF_GPIO_BASE		160
-#define	BALLOON3_PCF_GPIO_LED0		(BALLOON3_PCF_GPIO_BASE + 0)
-#define	BALLOON3_PCF_GPIO_LED1		(BALLOON3_PCF_GPIO_BASE + 1)
-#define	BALLOON3_PCF_GPIO_LED2		(BALLOON3_PCF_GPIO_BASE + 2)
-#define	BALLOON3_PCF_GPIO_LED3		(BALLOON3_PCF_GPIO_BASE + 3)
-#define	BALLOON3_PCF_GPIO_LED4		(BALLOON3_PCF_GPIO_BASE + 4)
-#define	BALLOON3_PCF_GPIO_LED5		(BALLOON3_PCF_GPIO_BASE + 5)
-#define	BALLOON3_PCF_GPIO_LED6		(BALLOON3_PCF_GPIO_BASE + 6)
-#define	BALLOON3_PCF_GPIO_LED7		(BALLOON3_PCF_GPIO_BASE + 7)
-
-/* FPGA Interrupt Mask/Acknowledge Register */
-#define BALLOON3_INT_S0_IRQ		(1 << 0)  /* PCMCIA 0 IRQ */
-#define BALLOON3_INT_S0_STSCHG		(1 << 1)  /* PCMCIA 0 status changed */
-
-/* CPLD (and FPGA) interface definitions */
-#define CPLD_LCD0_DATA_SET             0x00
-#define CPLD_LCD0_DATA_CLR             0x10
-#define CPLD_LCD0_COMMAND_SET          0x01
-#define CPLD_LCD0_COMMAND_CLR          0x11
-#define CPLD_LCD1_DATA_SET             0x02
-#define CPLD_LCD1_DATA_CLR             0x12
-#define CPLD_LCD1_COMMAND_SET          0x03
-#define CPLD_LCD1_COMMAND_CLR          0x13
-
-#define CPLD_MISC_SET                  0x07
-#define CPLD_MISC_CLR                  0x17
-#define CPLD_MISC_LOON_NRESET_BIT      0
-#define CPLD_MISC_LOON_UNSUSP_BIT      1
-#define CPLD_MISC_RUN_5V_BIT           2
-#define CPLD_MISC_CHG_D0_BIT           3
-#define CPLD_MISC_CHG_D1_BIT           4
-#define CPLD_MISC_DAC_NCS_BIT          5
-
-#define CPLD_LCD_SET                   0x08
-#define CPLD_LCD_CLR                   0x18
-#define CPLD_LCD_BACKLIGHT_EN_0_BIT    0
-#define CPLD_LCD_BACKLIGHT_EN_1_BIT    1
-#define CPLD_LCD_LED_RED_BIT           4
-#define CPLD_LCD_LED_GREEN_BIT         5
-#define CPLD_LCD_NRESET_BIT            7
-
-#define CPLD_LCD_RO_SET                0x09
-#define CPLD_LCD_RO_CLR                0x19
-#define CPLD_LCD_RO_LCD0_nWAIT_BIT     0
-#define CPLD_LCD_RO_LCD1_nWAIT_BIT     1
-
-#define CPLD_SERIAL_SET                0x0a
-#define CPLD_SERIAL_CLR                0x1a
-#define CPLD_SERIAL_GSM_RI_BIT         0
-#define CPLD_SERIAL_GSM_CTS_BIT        1
-#define CPLD_SERIAL_GSM_DTR_BIT        2
-#define CPLD_SERIAL_LPR_CTS_BIT        3
-#define CPLD_SERIAL_TC232_CTS_BIT      4
-#define CPLD_SERIAL_TC232_DSR_BIT      5
-
-#define CPLD_SROUTING_SET              0x0b
-#define CPLD_SROUTING_CLR              0x1b
-#define CPLD_SROUTING_MSP430_LPR       0
-#define CPLD_SROUTING_MSP430_TC232     1
-#define CPLD_SROUTING_MSP430_GSM       2
-#define CPLD_SROUTING_LOON_LPR         (0 << 4)
-#define CPLD_SROUTING_LOON_TC232       (1 << 4)
-#define CPLD_SROUTING_LOON_GSM         (2 << 4)
-
-#define CPLD_AROUTING_SET              0x0c
-#define CPLD_AROUTING_CLR              0x1c
-#define CPLD_AROUTING_MIC2PHONE_BIT    0
-#define CPLD_AROUTING_PHONE2INT_BIT    1
-#define CPLD_AROUTING_PHONE2EXT_BIT    2
-#define CPLD_AROUTING_LOONL2INT_BIT    3
-#define CPLD_AROUTING_LOONL2EXT_BIT    4
-#define CPLD_AROUTING_LOONR2PHONE_BIT  5
-#define CPLD_AROUTING_LOONR2INT_BIT    6
-#define CPLD_AROUTING_LOONR2EXT_BIT    7
-
-/* Balloon3 Interrupts */
-#define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
-
-#define BALLOON3_AUX_NIRQ	PXA_GPIO_TO_IRQ(BALLOON3_GPIO_AUX_NIRQ)
-#define BALLOON3_CODEC_IRQ	PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ)
-
-#define BALLOON3_NR_IRQS	(IRQ_BOARD_START + 16)
-
-extern int balloon3_has(enum balloon3_features feature);
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/bitfield.h b/arch/arm/mach-pxa/include/mach/bitfield.h
deleted file mode 100644
index fe2ca441bc0a..000000000000
--- a/arch/arm/mach-pxa/include/mach/bitfield.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- *	FILE    	bitfield.h
- *
- *	Version 	1.1
- *	Author  	Copyright (c) Marc A. Viredaz, 1998
- *	        	DEC Western Research Laboratory, Palo Alto, CA
- *	Date    	April 1998 (April 1997)
- *	System  	Advanced RISC Machine (ARM)
- *	Language	C or ARM Assembly
- *	Purpose 	Definition of macros to operate on bit fields.
- */
-
-
-
-#ifndef __BITFIELD_H
-#define __BITFIELD_H
-
-#ifndef __ASSEMBLY__
-#define UData(Data)	((unsigned long) (Data))
-#else
-#define UData(Data)	(Data)
-#endif
-
-
-/*
- * MACRO: Fld
- *
- * Purpose
- *    The macro "Fld" encodes a bit field, given its size and its shift value
- *    with respect to bit 0.
- *
- * Note
- *    A more intuitive way to encode bit fields would have been to use their
- *    mask. However, extracting size and shift value information from a bit
- *    field's mask is cumbersome and might break the assembler (255-character
- *    line-size limit).
- *
- * Input
- *    Size      	Size of the bit field, in number of bits.
- *    Shft      	Shift value of the bit field with respect to bit 0.
- *
- * Output
- *    Fld       	Encoded bit field.
- */
-
-#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
-
-
-/*
- * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
- *
- * Purpose
- *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
- *    the size, shift value, mask, aligned mask, and first bit of a
- *    bit field.
- *
- * Input
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FSize     	Size of the bit field, in number of bits.
- *    FShft     	Shift value of the bit field with respect to bit 0.
- *    FMsk      	Mask for the bit field.
- *    FAlnMsk   	Mask for the bit field, aligned on bit 0.
- *    F1stBit   	First bit of the bit field.
- */
-
-#define FSize(Field)	((Field) >> 16)
-#define FShft(Field)	((Field) & 0x0000FFFF)
-#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
-#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
-#define F1stBit(Field)	(UData (1) << FShft (Field))
-
-
-/*
- * MACRO: FInsrt
- *
- * Purpose
- *    The macro "FInsrt" inserts a value into a bit field by shifting the
- *    former appropriately.
- *
- * Input
- *    Value     	Bit-field value.
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FInsrt    	Bit-field value positioned appropriately.
- */
-
-#define FInsrt(Value, Field) \
-                	(UData (Value) << FShft (Field))
-
-
-/*
- * MACRO: FExtr
- *
- * Purpose
- *    The macro "FExtr" extracts the value of a bit field by masking and
- *    shifting it appropriately.
- *
- * Input
- *    Data      	Data containing the bit-field to be extracted.
- *    Field     	Encoded bit field (using the macro "Fld").
- *
- * Output
- *    FExtr     	Bit-field value.
- */
-
-#define FExtr(Data, Field) \
-                	((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
-
-
-#endif /* __BITFIELD_H */
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
deleted file mode 100644
index b565ca7b8cda..000000000000
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Hardware specific definitions for SL-C7xx series of PDAs
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches
- */
-#ifndef __ASM_ARCH_CORGI_H
-#define __ASM_ARCH_CORGI_H  1
-
-#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
-
-/*
- * Corgi (Non Standard) GPIO Definitions
- */
-#define CORGI_GPIO_KEY_INT			(0)	/* Keyboard Interrupt */
-#define CORGI_GPIO_AC_IN			(1) /* Charger Detection */
-#define CORGI_GPIO_WAKEUP			(3) /* System wakeup notification? */
-#define CORGI_GPIO_AK_INT			(4)	/* Headphone Jack Control Interrupt */
-#define CORGI_GPIO_TP_INT			(5)	/* Touch Panel Interrupt */
-#define CORGI_GPIO_nSD_WP			(7) /* SD Write Protect? */
-#define CORGI_GPIO_nSD_DETECT		(9) /* MMC/SD Card Detect */
-#define CORGI_GPIO_nSD_INT			(10) /* SD Interrupt for SDIO? */
-#define CORGI_GPIO_MAIN_BAT_LOW		(11) /* Main Battery Low Notification */
-#define CORGI_GPIO_BAT_COVER		(11) /* Battery Cover Detect */
-#define CORGI_GPIO_LED_ORANGE		(13) /* Orange LED Control */
-#define CORGI_GPIO_CF_CD			(14) /* Compact Flash Card Detect */
-#define CORGI_GPIO_CHRG_FULL		(16) /* Charging Complete Notification */
-#define CORGI_GPIO_CF_IRQ			(17) /* Compact Flash Interrupt */
-#define CORGI_GPIO_LCDCON_CS		(19) /* LCD Control Chip Select */
-#define CORGI_GPIO_MAX1111_CS		(20) /* MAX1111 Chip Select */
-#define CORGI_GPIO_ADC_TEMP_ON		(21) /* Select battery voltage or temperature */
-#define CORGI_GPIO_IR_ON			(22) /* Enable IR Transceiver */
-#define CORGI_GPIO_ADS7846_CS		(24) /* ADS7846 Chip Select */
-#define CORGI_GPIO_SD_PWR			(33) /* MMC/SD Power */
-#define CORGI_GPIO_CHRG_ON			(38) /* Enable battery Charging */
-#define CORGI_GPIO_DISCHARGE_ON		(42) /* Enable battery Discharge */
-#define CORGI_GPIO_CHRG_UKN			(43) /* Unknown Charging (Bypass Control?) */
-#define CORGI_GPIO_HSYNC			(44) /* LCD HSync Pulse */
-#define CORGI_GPIO_USB_PULLUP		(45) /* USB show presence to host */
-
-
-/*
- * Corgi Keyboard Definitions
- */
-#define CORGI_KEY_STROBE_NUM		(12)
-#define CORGI_KEY_SENSE_NUM			(8)
-#define CORGI_GPIO_ALL_STROBE_BIT	(0x00003ffc)
-#define CORGI_GPIO_HIGH_SENSE_BIT	(0xfc000000)
-#define CORGI_GPIO_HIGH_SENSE_RSHIFT	(26)
-#define CORGI_GPIO_LOW_SENSE_BIT	(0x00000003)
-#define CORGI_GPIO_LOW_SENSE_LSHIFT	(6)
-#define CORGI_GPIO_STROBE_BIT(a)	GPIO_bit(66+(a))
-#define CORGI_GPIO_SENSE_BIT(a)		GPIO_bit(58+(a))
-#define CORGI_GAFR_ALL_STROBE_BIT	(0x0ffffff0)
-#define CORGI_GAFR_HIGH_SENSE_BIT	(0xfff00000)
-#define CORGI_GAFR_LOW_SENSE_BIT	(0x0000000f)
-#define CORGI_GPIO_KEY_SENSE(a)		(58+(a))
-#define CORGI_GPIO_KEY_STROBE(a)	(66+(a))
-
-
-/*
- * Corgi Interrupts
- */
-#define CORGI_IRQ_GPIO_KEY_INT		PXA_GPIO_TO_IRQ(0)
-#define CORGI_IRQ_GPIO_AC_IN		PXA_GPIO_TO_IRQ(1)
-#define CORGI_IRQ_GPIO_WAKEUP		PXA_GPIO_TO_IRQ(3)
-#define CORGI_IRQ_GPIO_AK_INT		PXA_GPIO_TO_IRQ(4)
-#define CORGI_IRQ_GPIO_TP_INT		PXA_GPIO_TO_IRQ(5)
-#define CORGI_IRQ_GPIO_nSD_DETECT	PXA_GPIO_TO_IRQ(9)
-#define CORGI_IRQ_GPIO_nSD_INT		PXA_GPIO_TO_IRQ(10)
-#define CORGI_IRQ_GPIO_MAIN_BAT_LOW	PXA_GPIO_TO_IRQ(11)
-#define CORGI_IRQ_GPIO_CF_CD		PXA_GPIO_TO_IRQ(14)
-#define CORGI_IRQ_GPIO_CHRG_FULL	PXA_GPIO_TO_IRQ(16)	/* Battery fully charged */
-#define CORGI_IRQ_GPIO_CF_IRQ		PXA_GPIO_TO_IRQ(17)
-#define CORGI_IRQ_GPIO_KEY_SENSE(a)	PXA_GPIO_TO_IRQ(58+(a))	/* Keyboard Sense lines */
-
-
-/*
- * Corgi SCOOP GPIOs and Config
- */
-#define CORGI_SCP_LED_GREEN		SCOOP_GPCR_PA11
-#define CORGI_SCP_SWA			SCOOP_GPCR_PA12  /* Hinge Switch A */
-#define CORGI_SCP_SWB			SCOOP_GPCR_PA13  /* Hinge Switch B */
-#define CORGI_SCP_MUTE_L		SCOOP_GPCR_PA14
-#define CORGI_SCP_MUTE_R		SCOOP_GPCR_PA15
-#define CORGI_SCP_AKIN_PULLUP	SCOOP_GPCR_PA16
-#define CORGI_SCP_APM_ON		SCOOP_GPCR_PA17
-#define CORGI_SCP_BACKLIGHT_CONT	SCOOP_GPCR_PA18
-#define CORGI_SCP_MIC_BIAS		SCOOP_GPCR_PA19
-
-#define CORGI_SCOOP_IO_DIR	( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \
-			CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \
-			CORGI_SCP_MIC_BIAS )
-#define CORGI_SCOOP_IO_OUT	( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
-
-#define CORGI_SCOOP_GPIO_BASE		(PXA_NR_BUILTIN_GPIO)
-#define CORGI_GPIO_LED_GREEN		(CORGI_SCOOP_GPIO_BASE + 0)
-#define CORGI_GPIO_SWA			(CORGI_SCOOP_GPIO_BASE + 1)  /* Hinge Switch A */
-#define CORGI_GPIO_SWB			(CORGI_SCOOP_GPIO_BASE + 2)  /* Hinge Switch B */
-#define CORGI_GPIO_MUTE_L		(CORGI_SCOOP_GPIO_BASE + 3)
-#define CORGI_GPIO_MUTE_R		(CORGI_SCOOP_GPIO_BASE + 4)
-#define CORGI_GPIO_AKIN_PULLUP		(CORGI_SCOOP_GPIO_BASE + 5)
-#define CORGI_GPIO_APM_ON		(CORGI_SCOOP_GPIO_BASE + 6)
-#define CORGI_GPIO_BACKLIGHT_CONT	(CORGI_SCOOP_GPIO_BASE + 7)
-#define CORGI_GPIO_MIC_BIAS		(CORGI_SCOOP_GPIO_BASE + 8)
-
-#endif /* __ASM_ARCH_CORGI_H  */
-
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
deleted file mode 100644
index 79f9842a7e1c..000000000000
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-pxa/include/mach/dma.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software, Inc.
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#include <mach/hardware.h>
-
-/* DMA Controller Registers Definitions */
-#define DMAC_REGS_VIRT	io_p2v(0x40000000)
-
-#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
deleted file mode 100644
index 5c645600d401..000000000000
--- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  eseries-gpio.h
- *
- *  Copyright (C) Ian Molton <spyro@f2s.com>
- */
-
-/* e-series power button */
-#define GPIO_ESERIES_POWERBTN     0
-
-/* UDC GPIO definitions */
-#define GPIO_E7XX_USB_DISC       13
-#define GPIO_E7XX_USB_PULLUP      3
-
-#define GPIO_E800_USB_DISC        4
-#define GPIO_E800_USB_PULLUP     84
-
-/* e740 PCMCIA GPIO definitions */
-/* Note: PWR1 seems to be inverted */
-#define GPIO_E740_PCMCIA_CD0      8
-#define GPIO_E740_PCMCIA_CD1     44
-#define GPIO_E740_PCMCIA_RDY0    11
-#define GPIO_E740_PCMCIA_RDY1     6
-#define GPIO_E740_PCMCIA_RST0    27
-#define GPIO_E740_PCMCIA_RST1    24
-#define GPIO_E740_PCMCIA_PWR0    20
-#define GPIO_E740_PCMCIA_PWR1    23
-
-/* e750 PCMCIA GPIO definitions */
-#define GPIO_E750_PCMCIA_CD0      8
-#define GPIO_E750_PCMCIA_RDY0    12
-#define GPIO_E750_PCMCIA_RST0    27
-#define GPIO_E750_PCMCIA_PWR0    20
-
-/* e800 PCMCIA GPIO definitions */
-#define GPIO_E800_PCMCIA_RST0    69
-#define GPIO_E800_PCMCIA_RST1    72
-#define GPIO_E800_PCMCIA_PWR0    20
-#define GPIO_E800_PCMCIA_PWR1    73
-
-/* e7xx IrDA power control */
-#define GPIO_E7XX_IR_OFF         38
-
-/* e740 audio control GPIOs */
-#define GPIO_E740_WM9705_nAVDD2  16
-#define GPIO_E740_MIC_ON         40
-#define GPIO_E740_AMP_ON         41
-
-/* e750 audio control GPIOs */
-#define GPIO_E750_HP_AMP_OFF      4
-#define GPIO_E750_SPK_AMP_OFF     7
-#define GPIO_E750_HP_DETECT      37
-
-/* e800 audio control GPIOs */
-#define GPIO_E800_HP_DETECT      81
-#define GPIO_E800_HP_AMP_OFF     82
-#define GPIO_E800_SPK_AMP_ON     83
-
-/* ASIC related GPIOs */
-#define GPIO_ESERIES_TMIO_IRQ        5
-#define GPIO_ESERIES_TMIO_PCLR      19
-#define GPIO_ESERIES_TMIO_SUSPEND   45
-#define GPIO_E800_ANGELX_IRQ      8
diff --git a/arch/arm/mach-pxa/include/mach/generic.h b/arch/arm/mach-pxa/include/mach/generic.h
deleted file mode 100644
index 665542e0c9e2..000000000000
--- a/arch/arm/mach-pxa/include/mach/generic.h
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../generic.h"
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
deleted file mode 100644
index ee7eab16135f..000000000000
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ /dev/null
@@ -1,305 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-pxa/include/mach/hardware.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <mach/addr-map.h>
-
-/*
- * Workarounds for at least 2 errata so far require this.
- * The mapping is set in mach-pxa/generic.c.
- */
-#define UNCACHED_PHYS_0		0xfe000000
-#define UNCACHED_PHYS_0_SIZE	0x00100000
-
-/*
- * Intel PXA2xx internal register mapping:
- *
- * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
- * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
- * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
- * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
- * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
- * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
- * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
- *
- * Note that not all PXA2xx chips implement all those addresses, and the
- * kernel only maps the minimum needed range of this mapping.
- */
-#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
-#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
-
-#ifndef __ASSEMBLY__
-# define __REG(x)	(*((volatile u32 __iomem *)io_p2v(x)))
-
-/* With indexed regs we don't want to feed the index through io_p2v()
-   especially if it is a variable, otherwise horrible code will result. */
-# define __REG2(x,y)	\
-	(*(volatile u32 __iomem*)((u32)&__REG(x) + (y)))
-
-# define __PREG(x)	(io_v2p((u32)&(x)))
-
-#else
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <asm/cputype.h>
-
-/*
- *   CPU     Stepping     CPU_ID         JTAG_ID
- *
- *  PXA210	B0	0x69052922	0x2926C013
- *  PXA210	B1	0x69052923	0x3926C013
- *  PXA210	B2	0x69052924	0x4926C013
- *  PXA210	C0	0x69052D25	0x5926C013
- *
- *  PXA250	A0	0x69052100	0x09264013
- *  PXA250	A1	0x69052101	0x19264013
- *  PXA250	B0	0x69052902	0x29264013
- *  PXA250	B1	0x69052903	0x39264013
- *  PXA250	B2	0x69052904	0x49264013
- *  PXA250	C0	0x69052D05	0x59264013
- *
- *  PXA255	A0	0x69052D06	0x69264013
- *
- *  PXA26x	A0	0x69052903	0x39264013
- *  PXA26x	B0	0x69052D05	0x59264013
- *
- *  PXA27x	A0	0x69054110	0x09265013
- *  PXA27x	A1	0x69054111	0x19265013
- *  PXA27x	B0	0x69054112	0x29265013
- *  PXA27x	B1	0x69054113	0x39265013
- *  PXA27x	C0	0x69054114	0x49265013
- *  PXA27x	C5	0x69054117	0x79265013
- *
- *  PXA30x	A0	0x69056880	0x0E648013
- *  PXA30x	A1	0x69056881	0x1E648013
- *  PXA31x	A0	0x69056890	0x0E649013
- *  PXA31x	A1	0x69056891	0x1E649013
- *  PXA31x	A2	0x69056892	0x2E649013
- *  PXA32x	B1	0x69056825	0x5E642013
- *  PXA32x	B2	0x69056826	0x6E642013
- *
- *  PXA930	B0	0x69056835	0x5E643013
- *  PXA930	B1	0x69056837	0x7E643013
- *  PXA930	B2	0x69056838	0x8E643013
- *
- *  PXA935	A0	0x56056931	0x1E653013
- *  PXA935	B0	0x56056936	0x6E653013
- *  PXA935	B1	0x56056938	0x8E653013
- */
-#ifdef CONFIG_PXA25x
-#define __cpu_is_pxa210(id)				\
-	({						\
-		unsigned int _id = (id) & 0xf3f0;	\
-		_id == 0x2120;				\
-	})
-
-#define __cpu_is_pxa250(id)				\
-	({						\
-		unsigned int _id = (id) & 0xf3ff;	\
-		_id <= 0x2105;				\
-	})
-
-#define __cpu_is_pxa255(id)				\
-	({						\
-		unsigned int _id = (id) & 0xffff;	\
-		_id == 0x2d06;				\
-	})
-
-#define __cpu_is_pxa25x(id)				\
-	({						\
-		unsigned int _id = (id) & 0xf300;	\
-		_id == 0x2100;				\
-	})
-#else
-#define __cpu_is_pxa210(id)	(0)
-#define __cpu_is_pxa250(id)	(0)
-#define __cpu_is_pxa255(id)	(0)
-#define __cpu_is_pxa25x(id)	(0)
-#endif
-
-#ifdef CONFIG_PXA27x
-#define __cpu_is_pxa27x(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x411;				\
-	})
-#else
-#define __cpu_is_pxa27x(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA300
-#define __cpu_is_pxa300(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x688;				\
-	 })
-#else
-#define __cpu_is_pxa300(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA310
-#define __cpu_is_pxa310(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x689;				\
-	 })
-#else
-#define __cpu_is_pxa310(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA320
-#define __cpu_is_pxa320(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x603 || _id == 0x682;		\
-	 })
-#else
-#define __cpu_is_pxa320(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA930
-#define __cpu_is_pxa930(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x683;				\
-	 })
-#else
-#define __cpu_is_pxa930(id)	(0)
-#endif
-
-#ifdef CONFIG_CPU_PXA935
-#define __cpu_is_pxa935(id)				\
-	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x693;				\
-	 })
-#else
-#define __cpu_is_pxa935(id)	(0)
-#endif
-
-#define cpu_is_pxa210()					\
-	({						\
-		__cpu_is_pxa210(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa250()					\
-	({						\
-		__cpu_is_pxa250(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa255()                                 \
-	({                                              \
-		__cpu_is_pxa255(read_cpuid_id());       \
-	})
-
-#define cpu_is_pxa25x()					\
-	({						\
-		__cpu_is_pxa25x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa27x()					\
-	({						\
-		__cpu_is_pxa27x(read_cpuid_id());	\
-	})
-
-#define cpu_is_pxa300()					\
-	({						\
-		__cpu_is_pxa300(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa310()					\
-	({						\
-		__cpu_is_pxa310(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa320()					\
-	({						\
-		__cpu_is_pxa320(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa930()					\
-	({						\
-		__cpu_is_pxa930(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa935()					\
-	({						\
-		__cpu_is_pxa935(read_cpuid_id());	\
-	 })
-
-
-
-/*
- * CPUID Core Generation Bit
- * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
- */
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-#define __cpu_is_pxa2xx(id)				\
-	({						\
-		unsigned int _id = (id) >> 13 & 0x7;	\
-		_id <= 0x2;				\
-	 })
-#else
-#define __cpu_is_pxa2xx(id)	(0)
-#endif
-
-#ifdef CONFIG_PXA3xx
-#define __cpu_is_pxa3xx(id)				\
-	({						\
-		__cpu_is_pxa300(id)			\
-			|| __cpu_is_pxa310(id)		\
-			|| __cpu_is_pxa320(id)		\
-			|| __cpu_is_pxa93x(id);		\
-	 })
-#else
-#define __cpu_is_pxa3xx(id)	(0)
-#endif
-
-#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
-#define __cpu_is_pxa93x(id)				\
-	({						\
-		__cpu_is_pxa930(id)			\
-			|| __cpu_is_pxa935(id);		\
-	 })
-#else
-#define __cpu_is_pxa93x(id)	(0)
-#endif
-
-#define cpu_is_pxa2xx()					\
-	({						\
-		__cpu_is_pxa2xx(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa3xx()					\
-	({						\
-		__cpu_is_pxa3xx(read_cpuid_id());	\
-	 })
-
-#define cpu_is_pxa93x()					\
-	({						\
-		__cpu_is_pxa93x(read_cpuid_id());	\
-	 })
-
-
-/*
- * return current memory and LCD clock frequency in units of 10kHz
- */
-extern unsigned int get_memclk_frequency_10khz(void);
-
-#endif
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
deleted file mode 100644
index 0c30e6d9c660..000000000000
--- a/arch/arm/mach-pxa/include/mach/hx4700.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIO and IRQ definitions for HP iPAQ hx4700
- *
- * Copyright (c) 2008 Philipp Zabel
- */
-
-#ifndef _HX4700_H_
-#define _HX4700_H_
-
-#include <linux/gpio.h>
-#include <linux/mfd/asic3.h>
-#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
-
-#define HX4700_ASIC3_GPIO_BASE	PXA_NR_BUILTIN_GPIO
-#define HX4700_EGPIO_BASE	(HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
-#define HX4700_NR_IRQS		(IRQ_BOARD_START + 70)
-
-/*
- * PXA GPIOs
- */
-
-#define GPIO0_HX4700_nKEY_POWER			0
-#define GPIO12_HX4700_ASIC3_IRQ			12
-#define GPIO13_HX4700_W3220_IRQ			13
-#define GPIO14_HX4700_nWLAN_IRQ			14
-#define GPIO18_HX4700_RDY			18
-#define GPIO22_HX4700_LCD_RL			22
-#define GPIO27_HX4700_CODEC_ON			27
-#define GPIO32_HX4700_RS232_ON			32
-#define GPIO52_HX4700_CPU_nBATT_FAULT		52
-#define GPIO58_HX4700_TSC2046_nPENIRQ		58
-#define GPIO59_HX4700_LCD_PC1			59
-#define GPIO60_HX4700_CF_RNB			60
-#define GPIO61_HX4700_W3220_nRESET		61
-#define GPIO62_HX4700_LCD_nRESET		62
-#define GPIO63_HX4700_CPU_SS_nRESET		63
-#define GPIO65_HX4700_TSC2046_PEN_PU		65
-#define GPIO66_HX4700_ASIC3_nSDIO_IRQ		66
-#define GPIO67_HX4700_EUART_PS			67
-#define GPIO70_HX4700_LCD_SLIN1			70
-#define GPIO71_HX4700_ASIC3_nRESET		71
-#define GPIO72_HX4700_BQ24022_nCHARGE_EN	72
-#define GPIO73_HX4700_LCD_UD_1			73
-#define GPIO75_HX4700_EARPHONE_nDET		75
-#define GPIO76_HX4700_USBC_PUEN			76
-#define GPIO81_HX4700_CPU_GP_nRESET		81
-#define GPIO82_HX4700_EUART_RESET		82
-#define GPIO83_HX4700_WLAN_nRESET		83
-#define GPIO84_HX4700_LCD_SQN			84
-#define GPIO85_HX4700_nPCE1			85
-#define GPIO88_HX4700_TSC2046_CS		88
-#define GPIO91_HX4700_FLASH_VPEN		91
-#define GPIO92_HX4700_HP_DRIVER			92
-#define GPIO93_HX4700_EUART_INT			93
-#define GPIO94_HX4700_KEY_MAIL			94
-#define GPIO95_HX4700_BATT_OFF			95
-#define GPIO96_HX4700_BQ24022_ISET2		96
-#define GPIO97_HX4700_nBL_DETECT		97
-#define GPIO99_HX4700_KEY_CONTACTS		99
-#define GPIO100_HX4700_AUTO_SENSE		100 /* BL auto brightness */
-#define GPIO102_HX4700_SYNAPTICS_POWER_ON	102
-#define GPIO103_HX4700_SYNAPTICS_INT		103
-#define GPIO105_HX4700_nIR_ON			105
-#define GPIO106_HX4700_CPU_BT_nRESET		106
-#define GPIO107_HX4700_SPK_nSD			107
-#define GPIO109_HX4700_CODEC_nPDN		109
-#define GPIO110_HX4700_LCD_LVDD_3V3_ON		110
-#define GPIO111_HX4700_LCD_AVDD_3V3_ON		111
-#define GPIO112_HX4700_LCD_N2V7_7V3_ON		112
-#define GPIO114_HX4700_CF_RESET			114
-#define GPIO116_HX4700_CPU_HW_nRESET		116
-
-/*
- * ASIC3 GPIOs
- */
-
-#define GPIOC_BASE		(HX4700_ASIC3_GPIO_BASE + 32)
-#define GPIOD_BASE		(HX4700_ASIC3_GPIO_BASE + 48)
-
-#define GPIOC0_LED_RED		(GPIOC_BASE + 0)
-#define GPIOC1_LED_GREEN	(GPIOC_BASE + 1)
-#define GPIOC2_LED_BLUE		(GPIOC_BASE + 2)
-#define GPIOC3_nSD_CS		(GPIOC_BASE + 3)
-#define GPIOC4_CF_nCD		(GPIOC_BASE + 4)	/* Input */
-#define GPIOC5_nCIOW		(GPIOC_BASE + 5)	/* Output, to CF */
-#define GPIOC6_nCIOR		(GPIOC_BASE + 6)	/* Output, to CF */
-#define GPIOC7_nPCE1		(GPIOC_BASE + 7)	/* Input, from CPU */
-#define GPIOC8_nPCE2		(GPIOC_BASE + 8)	/* Input, from CPU */
-#define GPIOC9_nPOE		(GPIOC_BASE + 9)	/* Input, from CPU */
-#define GPIOC10_CF_nPWE		(GPIOC_BASE + 10)	/* Input */
-#define GPIOC11_PSKTSEL		(GPIOC_BASE + 11)	/* Input, from CPU */
-#define GPIOC12_nPREG		(GPIOC_BASE + 12)	/* Input, from CPU */
-#define GPIOC13_nPWAIT		(GPIOC_BASE + 13)	/* Output, to CPU */
-#define GPIOC14_nPIOIS16	(GPIOC_BASE + 14)	/* Output, to CPU */
-#define GPIOC15_nPIOR		(GPIOC_BASE + 15)	/* Input, from CPU */
-
-#define GPIOD0_CPU_SS_INT	(GPIOD_BASE + 0)	/* Input */
-#define GPIOD1_nKEY_CALENDAR	(GPIOD_BASE + 1)
-#define GPIOD2_BLUETOOTH_WAKEUP	(GPIOD_BASE + 2)
-#define GPIOD3_nKEY_HOME	(GPIOD_BASE + 3)
-#define GPIOD4_CF_nCD		(GPIOD_BASE + 4)	/* Input, from CF */
-#define GPIOD5_nPIO		(GPIOD_BASE + 5)	/* Input */
-#define GPIOD6_nKEY_RECORD	(GPIOD_BASE + 6)
-#define GPIOD7_nSDIO_DETECT	(GPIOD_BASE + 7)
-#define GPIOD8_COM_DCD		(GPIOD_BASE + 8)	/* Input */
-#define GPIOD9_nAC_IN		(GPIOD_BASE + 9)
-#define GPIOD10_nSDIO_IRQ	(GPIOD_BASE + 10)	/* Input */
-#define GPIOD11_nCIOIS16	(GPIOD_BASE + 11)	/* Input, from CF */
-#define GPIOD12_nCWAIT		(GPIOD_BASE + 12)	/* Input, from CF */
-#define GPIOD13_CF_RNB		(GPIOD_BASE + 13)	/* Input */
-#define GPIOD14_nUSBC_DETECT	(GPIOD_BASE + 14)
-#define GPIOD15_nPIOW		(GPIOD_BASE + 15)	/* Input, from CPU */
-
-/*
- * EGPIOs
- */
-
-#define EGPIO0_VCC_3V3_EN	(HX4700_EGPIO_BASE + 0)	/* WLAN support chip */
-#define EGPIO1_WL_VREG_EN	(HX4700_EGPIO_BASE + 1)	/* WLAN power */
-#define EGPIO2_VCC_2V1_WL_EN	(HX4700_EGPIO_BASE + 2)	/* unused */
-#define EGPIO3_SS_PWR_ON	(HX4700_EGPIO_BASE + 3)	/* smart slot power */
-#define EGPIO4_CF_3V3_ON	(HX4700_EGPIO_BASE + 4)	/* CF 3.3V enable */
-#define EGPIO5_BT_3V3_ON	(HX4700_EGPIO_BASE + 5)	/* BT 3.3V enable */
-#define EGPIO6_WL1V8_EN		(HX4700_EGPIO_BASE + 6)	/* WLAN 1.8V enable */
-#define EGPIO7_VCC_3V3_WL_EN	(HX4700_EGPIO_BASE + 7)	/* WLAN 3.3V enable */
-#define EGPIO8_USB_3V3_ON	(HX4700_EGPIO_BASE + 8)	/* unused */
-
-#endif /* _HX4700_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
deleted file mode 100644
index a3af4a2f9446..000000000000
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-pxa/include/mach/lubbock.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- */
-
-#include <mach/irqs.h>
-
-#define LUBBOCK_ETH_PHYS	PXA_CS3_PHYS
-
-#define LUBBOCK_FPGA_PHYS	PXA_CS2_PHYS
-#define LUBBOCK_FPGA_VIRT	(0xf0000000)
-#define LUB_P2V(x)		((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT)
-#define LUB_V2P(x)		((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __LUB_REG(x)		(*((volatile unsigned long *)LUB_P2V(x)))
-#else
-#  define __LUB_REG(x)		LUB_P2V(x)
-#endif
-
-/* FPGA register virtual addresses */
-#define LUB_WHOAMI		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
-#define LUB_DISC_BLNK_LED	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
-#define LUB_CONF_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
-#define LUB_USER_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
-#define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
-#define LUB_MISC_RD		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x090)
-#define LUB_IRQ_MASK_EN		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0)
-#define LUB_IRQ_SET_CLR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
-#define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
-
-/* Board specific IRQs */
-#define LUBBOCK_NR_IRQS		IRQ_BOARD_START
-
-#define LUBBOCK_IRQ(x)		(LUBBOCK_NR_IRQS + (x))
-#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
-#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
-#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
-#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
-#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
-#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
-#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
-#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
-
-#define LUBBOCK_SA1111_IRQ_BASE	(LUBBOCK_NR_IRQS + 32)
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
deleted file mode 100644
index 7d3af561af6f..000000000000
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIO and IRQ definitions for HTC Magician PDA phones
- *
- * Copyright (c) 2007 Philipp Zabel
- */
-
-#ifndef _MAGICIAN_H_
-#define _MAGICIAN_H_
-
-#include <linux/gpio.h>
-#include <mach/irqs.h>
-
-/*
- * PXA GPIOs
- */
-
-#define GPIO0_MAGICIAN_KEY_POWER		0
-#define GPIO9_MAGICIAN_UNKNOWN			9
-#define GPIO10_MAGICIAN_GSM_IRQ			10
-#define GPIO11_MAGICIAN_GSM_OUT1		11
-#define GPIO13_MAGICIAN_CPLD_IRQ		13
-#define GPIO14_MAGICIAN_TSC2046_CS		14
-#define GPIO18_MAGICIAN_UNKNOWN			18
-#define GPIO22_MAGICIAN_VIBRA_EN		22
-#define GPIO26_MAGICIAN_GSM_POWER		26
-#define GPIO27_MAGICIAN_USBC_PUEN		27
-#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN	30
-#define GPIO37_MAGICIAN_KEY_HANGUP		37
-#define GPIO38_MAGICIAN_KEY_CONTACTS		38
-#define GPIO40_MAGICIAN_GSM_OUT2		40
-#define GPIO48_MAGICIAN_UNKNOWN			48
-#define GPIO56_MAGICIAN_UNKNOWN			56
-#define GPIO57_MAGICIAN_CAM_RESET		57
-#define GPIO75_MAGICIAN_SAMSUNG_POWER		75
-#define GPIO83_MAGICIAN_nIR_EN			83
-#define GPIO86_MAGICIAN_GSM_RESET		86
-#define GPIO87_MAGICIAN_GSM_SELECT		87
-#define GPIO90_MAGICIAN_KEY_CALENDAR		90
-#define GPIO91_MAGICIAN_KEY_CAMERA		91
-#define GPIO93_MAGICIAN_KEY_UP			93
-#define GPIO94_MAGICIAN_KEY_DOWN		94
-#define GPIO95_MAGICIAN_KEY_LEFT		95
-#define GPIO96_MAGICIAN_KEY_RIGHT		96
-#define GPIO97_MAGICIAN_KEY_ENTER		97
-#define GPIO98_MAGICIAN_KEY_RECORD		98
-#define GPIO99_MAGICIAN_HEADPHONE_IN		99
-#define GPIO100_MAGICIAN_KEY_VOL_UP		100
-#define GPIO101_MAGICIAN_KEY_VOL_DOWN 		101
-#define GPIO102_MAGICIAN_KEY_PHONE		102
-#define GPIO103_MAGICIAN_LED_KP			103
-#define GPIO104_MAGICIAN_LCD_VOFF_EN		104
-#define GPIO105_MAGICIAN_LCD_VON_EN		105
-#define GPIO106_MAGICIAN_LCD_DCDC_NRESET	106
-#define GPIO107_MAGICIAN_DS1WM_IRQ		107
-#define GPIO108_MAGICIAN_GSM_READY		108
-#define GPIO114_MAGICIAN_UNKNOWN		114
-#define GPIO115_MAGICIAN_nPEN_IRQ		115
-#define GPIO116_MAGICIAN_nCAM_EN		116
-#define GPIO119_MAGICIAN_UNKNOWN		119
-#define GPIO120_MAGICIAN_UNKNOWN		120
-
-/*
- * CPLD IRQs
- */
-
-#define IRQ_MAGICIAN_SD		(IRQ_BOARD_START + 0)
-#define IRQ_MAGICIAN_EP		(IRQ_BOARD_START + 1)
-#define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
-#define IRQ_MAGICIAN_VBUS	(IRQ_BOARD_START + 3)
-
-#define MAGICIAN_NR_IRQS	(IRQ_BOARD_START + 8)
-
-/*
- * CPLD EGPIOs
- */
-
-#define MAGICIAN_EGPIO_BASE		PXA_NR_BUILTIN_GPIO
-#define MAGICIAN_EGPIO(reg,bit) \
-	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
-
-/* output */
-
-#define EGPIO_MAGICIAN_TOPPOLY_POWER	MAGICIAN_EGPIO(0, 2)
-#define EGPIO_MAGICIAN_LED_POWER	MAGICIAN_EGPIO(0, 5)
-#define EGPIO_MAGICIAN_GSM_RESET	MAGICIAN_EGPIO(0, 6)
-#define EGPIO_MAGICIAN_LCD_POWER	MAGICIAN_EGPIO(0, 7)
-#define EGPIO_MAGICIAN_SPK_POWER	MAGICIAN_EGPIO(1, 0)
-#define EGPIO_MAGICIAN_EP_POWER		MAGICIAN_EGPIO(1, 1)
-#define EGPIO_MAGICIAN_IN_SEL0		MAGICIAN_EGPIO(1, 2)
-#define EGPIO_MAGICIAN_IN_SEL1		MAGICIAN_EGPIO(1, 3)
-#define EGPIO_MAGICIAN_MIC_POWER	MAGICIAN_EGPIO(1, 4)
-#define EGPIO_MAGICIAN_CODEC_RESET	MAGICIAN_EGPIO(1, 5)
-#define EGPIO_MAGICIAN_CODEC_POWER	MAGICIAN_EGPIO(1, 6)
-#define EGPIO_MAGICIAN_BL_POWER		MAGICIAN_EGPIO(1, 7)
-#define EGPIO_MAGICIAN_SD_POWER		MAGICIAN_EGPIO(2, 0)
-#define EGPIO_MAGICIAN_CARKIT_MIC	MAGICIAN_EGPIO(2, 1)
-#define EGPIO_MAGICIAN_IR_RX_SHUTDOWN	MAGICIAN_EGPIO(2, 2)
-#define EGPIO_MAGICIAN_FLASH_VPP	MAGICIAN_EGPIO(2, 3)
-#define EGPIO_MAGICIAN_BL_POWER2	MAGICIAN_EGPIO(2, 4)
-#define EGPIO_MAGICIAN_BQ24022_ISET2	MAGICIAN_EGPIO(2, 5)
-#define EGPIO_MAGICIAN_NICD_CHARGE	MAGICIAN_EGPIO(2, 6)
-#define EGPIO_MAGICIAN_GSM_POWER	MAGICIAN_EGPIO(2, 7)
-
-/* input */
-
-/* USB or AC charger type */
-#define EGPIO_MAGICIAN_CABLE_TYPE	MAGICIAN_EGPIO(4, 0)
-/*
- * Vbus is detected
- * FIXME behaves like (6,3), may differ for host/device
- */
-#define EGPIO_MAGICIAN_CABLE_VBUS	MAGICIAN_EGPIO(4, 1)
-
-#define EGPIO_MAGICIAN_BOARD_ID0	MAGICIAN_EGPIO(5, 0)
-#define EGPIO_MAGICIAN_BOARD_ID1	MAGICIAN_EGPIO(5, 1)
-#define EGPIO_MAGICIAN_BOARD_ID2	MAGICIAN_EGPIO(5, 2)
-#define EGPIO_MAGICIAN_LCD_SELECT	MAGICIAN_EGPIO(5, 3)
-#define EGPIO_MAGICIAN_nSD_READONLY	MAGICIAN_EGPIO(5, 4)
-
-#define EGPIO_MAGICIAN_EP_INSERT	MAGICIAN_EGPIO(6, 1)
-/* FIXME behaves like (4,1), may differ for host/device */
-#define EGPIO_MAGICIAN_CABLE_INSERTED	MAGICIAN_EGPIO(6, 3)
-
-#endif /* _MAGICIAN_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
deleted file mode 100644
index 1698f2ffd7c7..000000000000
--- a/arch/arm/mach-pxa/include/mach/mainstone.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-pxa/include/mach/mainstone.h
- *
- *  Author:	Nicolas Pitre
- *  Created:	Nov 14, 2002
- *  Copyright:	MontaVista Software Inc.
- */
-
-#ifndef ASM_ARCH_MAINSTONE_H
-#define ASM_ARCH_MAINSTONE_H
-
-#include <mach/irqs.h>
-
-#define MST_ETH_PHYS		PXA_CS4_PHYS
-
-#define MST_FPGA_PHYS		PXA_CS2_PHYS
-#define MST_FPGA_VIRT		(0xf0000000)
-#define MST_P2V(x)		((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
-#define MST_V2P(x)		((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-# define __MST_REG(x)		(*((volatile unsigned long *)MST_P2V(x)))
-#else
-# define __MST_REG(x)		MST_P2V(x)
-#endif
-
-/* board level registers in the FPGA */
-
-#define MST_LEDDAT1		__MST_REG(0x08000010)
-#define MST_LEDDAT2		__MST_REG(0x08000014)
-#define MST_LEDCTRL		__MST_REG(0x08000040)
-#define MST_GPSWR		__MST_REG(0x08000060)
-#define MST_MSCWR1		__MST_REG(0x08000080)
-#define MST_MSCWR2		__MST_REG(0x08000084)
-#define MST_MSCWR3		__MST_REG(0x08000088)
-#define MST_MSCRD		__MST_REG(0x08000090)
-#define MST_INTMSKENA		__MST_REG(0x080000c0)
-#define MST_INTSETCLR		__MST_REG(0x080000d0)
-#define MST_PCMCIA0		__MST_REG(0x080000e0)
-#define MST_PCMCIA1		__MST_REG(0x080000e4)
-
-#define MST_MSCWR1_CAMERA_ON	(1 << 15)  /* Camera interface power control */
-#define MST_MSCWR1_CAMERA_SEL	(1 << 14)  /* Camera interface mux control */
-#define MST_MSCWR1_LCD_CTL	(1 << 13)  /* General-purpose LCD control */
-#define MST_MSCWR1_MS_ON	(1 << 12)  /* Memory Stick power control */
-#define MST_MSCWR1_MMC_ON	(1 << 11)  /* MultiMediaCard* power control */
-#define MST_MSCWR1_MS_SEL	(1 << 10)  /* SD/MS multiplexer control */
-#define MST_MSCWR1_BB_SEL	(1 << 9)   /* PCMCIA/Baseband multiplexer */
-#define MST_MSCWR1_BT_ON	(1 << 8)   /* Bluetooth UART transceiver */
-#define MST_MSCWR1_BTDTR	(1 << 7)   /* Bluetooth UART DTR */
-
-#define MST_MSCWR1_IRDA_MASK	(3 << 5)   /* IrDA transceiver mode */
-#define MST_MSCWR1_IRDA_FULL	(0 << 5)   /* full distance power */
-#define MST_MSCWR1_IRDA_OFF	(1 << 5)   /* shutdown */
-#define MST_MSCWR1_IRDA_MED	(2 << 5)   /* 2/3 distance power */
-#define MST_MSCWR1_IRDA_LOW	(3 << 5)   /* 1/3 distance power */
-
-#define MST_MSCWR1_IRDA_FIR	(1 << 4)   /* IrDA transceiver SIR/FIR */
-#define MST_MSCWR1_GREENLED	(1 << 3)   /* LED D1 control */
-#define MST_MSCWR1_PDC_CTL	(1 << 2)   /* reserved */
-#define MST_MSCWR1_MTR_ON	(1 << 1)   /* Silent alert motor */
-#define MST_MSCWR1_SYSRESET	(1 << 0)   /* System reset */
-
-#define MST_MSCWR2_USB_OTG_RST	(1 << 6)   /* USB On The Go reset */
-#define MST_MSCWR2_USB_OTG_SEL	(1 << 5)   /* USB On The Go control */
-#define MST_MSCWR2_nUSBC_SC	(1 << 4)   /* USB client soft connect control */
-#define MST_MSCWR2_I2S_SPKROFF	(1 << 3)   /* I2S CODEC amplifier control */
-#define MST_MSCWR2_AC97_SPKROFF	(1 << 2)   /* AC97 CODEC amplifier control */
-#define MST_MSCWR2_RADIO_PWR	(1 << 1)   /* Radio module power control */
-#define MST_MSCWR2_RADIO_WAKE	(1 << 0)   /* Radio module wake-up signal */
-
-#define MST_MSCWR3_GPIO_RESET_EN	(1 << 2) /* Enable GPIO Reset */
-#define MST_MSCWR3_GPIO_RESET		(1 << 1) /* Initiate a GPIO Reset */
-#define MST_MSCWR3_COMMS_SW_RESET	(1 << 0) /* Communications Processor Reset Control */
-
-#define MST_MSCRD_nPENIRQ	(1 << 9)   /* ADI7873* nPENIRQ signal */
-#define MST_MSCRD_nMEMSTK_CD	(1 << 8)   /* Memory Stick detection signal */
-#define MST_MSCRD_nMMC_CD	(1 << 7)   /* SD/MMC card detection signal */
-#define MST_MSCRD_nUSIM_CD	(1 << 6)   /* USIM card detection signal */
-#define MST_MSCRD_USB_CBL	(1 << 5)   /* USB client cable status */
-#define MST_MSCRD_TS_BUSY	(1 << 4)   /* ADI7873 busy */
-#define MST_MSCRD_BTDSR		(1 << 3)   /* Bluetooth UART DSR */
-#define MST_MSCRD_BTRI		(1 << 2)   /* Bluetooth UART Ring Indicator */
-#define MST_MSCRD_BTDCD		(1 << 1)   /* Bluetooth UART DCD */
-#define MST_MSCRD_nMMC_WP	(1 << 0)   /* SD/MMC write-protect status */
-
-#define MST_INT_S1_IRQ		(1 << 15)  /* PCMCIA socket 1 IRQ */
-#define MST_INT_S1_STSCHG	(1 << 14)  /* PCMCIA socket 1 status changed */
-#define MST_INT_S1_CD		(1 << 13)  /* PCMCIA socket 1 card detection */
-#define MST_INT_S0_IRQ		(1 << 11)  /* PCMCIA socket 0 IRQ */
-#define MST_INT_S0_STSCHG	(1 << 10)  /* PCMCIA socket 0 status changed */
-#define MST_INT_S0_CD		(1 << 9)   /* PCMCIA socket 0 card detection */
-#define MST_INT_nEXBRD_INT	(1 << 7)   /* Expansion board IRQ */
-#define MST_INT_MSINS		(1 << 6)   /* Memory Stick* detection */
-#define MST_INT_PENIRQ		(1 << 5)   /* ADI7873* touch-screen IRQ */
-#define MST_INT_AC97		(1 << 4)   /* AC'97 CODEC IRQ */
-#define MST_INT_ETHERNET	(1 << 3)   /* Ethernet controller IRQ */
-#define MST_INT_USBC		(1 << 2)   /* USB client cable detection IRQ */
-#define MST_INT_USIM		(1 << 1)   /* USIM card detection IRQ */
-#define MST_INT_MMC		(1 << 0)   /* MMC/SD card detection IRQ */
-
-#define MST_PCMCIA_nIRQ		(1 << 10)  /* IRQ / ready signal */
-#define MST_PCMCIA_nSPKR_BVD2	(1 << 9)   /* VDD sense / digital speaker */
-#define MST_PCMCIA_nSTSCHG_BVD1	(1 << 8)   /* VDD sense / card status changed */
-#define MST_PCMCIA_nVS2		(1 << 7)   /* VSS voltage sense */
-#define MST_PCMCIA_nVS1		(1 << 6)   /* VSS voltage sense */
-#define MST_PCMCIA_nCD		(1 << 5)   /* Card detection signal */
-#define MST_PCMCIA_RESET	(1 << 4)   /* Card reset signal */
-#define MST_PCMCIA_PWR_MASK	(0x000f)   /* MAX1602 power-supply controls */
-
-#define MST_PCMCIA_PWR_VPP_0    0x0	   /* voltage VPP = 0V */
-#define MST_PCMCIA_PWR_VPP_120  0x2 	   /* voltage VPP = 12V*/
-#define MST_PCMCIA_PWR_VPP_VCC  0x1	   /* voltage VPP = VCC */
-#define MST_PCMCIA_PWR_VCC_0    0x0	   /* voltage VCC = 0V */
-#define MST_PCMCIA_PWR_VCC_33   0x8	   /* voltage VCC = 3.3V */
-#define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
-
-#define MST_PCMCIA_INPUTS \
-	(MST_PCMCIA_nIRQ | MST_PCMCIA_nSPKR_BVD2 | MST_PCMCIA_nSTSCHG_BVD1 | \
-	 MST_PCMCIA_nVS2 | MST_PCMCIA_nVS1 | MST_PCMCIA_nCD)
-
-/* board specific IRQs */
-#define MAINSTONE_NR_IRQS	IRQ_BOARD_START
-
-#define MAINSTONE_IRQ(x)	(MAINSTONE_NR_IRQS + (x))
-#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
-#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
-#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
-#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
-#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
-#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
-#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
-#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
-#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
-#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
-#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
-#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
-#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
-#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
deleted file mode 100644
index dbb961fb570e..000000000000
--- a/arch/arm/mach-pxa/include/mach/mfp.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-pxa/include/mach/mfp.h
- *
- * Multi-Function Pin Definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- *
- * 2007-8-21: eric miao <eric.miao@marvell.com>
- *            initial version
- */
-
-#ifndef __ASM_ARCH_MFP_H
-#define __ASM_ARCH_MFP_H
-
-#include <plat/mfp.h>
-
-#endif /* __ASM_ARCH_MFP_H */
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
deleted file mode 100644
index 4b31bef9e50a..000000000000
--- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- * 
- * Author:	Nicolas Pitre
- * Created:	Nov 2, 2004
- * Copyright:	(C) 2004 MontaVista Software, Inc.
- */
-
-#ifndef __ARCH_PXA_MTD_XIP_H__
-#define __ARCH_PXA_MTD_XIP_H__
-
-#include <mach/regs-ost.h>
-
-/* restored July 2017, this did not build since 2011! */
-
-#define ICIP			io_p2v(0x40d00000)
-#define ICMR			io_p2v(0x40d00004)
-#define xip_irqpending()	(readl(ICIP) & readl(ICMR))
-
-/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime()		readl(OSCR)
-#define xip_elapsed_since(x)	(signed)((readl(OSCR) - (x)) / 4)
-
-/*
- * xip_cpu_idle() is used when waiting for a delay equal or larger than
- * the system timer tick period.  This should put the CPU into idle mode
- * to save power and to be woken up only when some interrupts are pending.
- * As above, this should not rely upon standard kernel code.
- */
-
-#define xip_cpu_idle()  asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
-
-#endif /* __ARCH_PXA_MTD_XIP_H__ */
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
deleted file mode 100644
index 99a6d8b3a1e3..000000000000
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm LifeDrive Handheld Computer
- *
- * Authors:	Alex Osborne <ato@meshy.org>
- *		Marek Vasut <marek.vasut@gmail.com>
- */
-
-#ifndef _INCLUDE_PALMLD_H_
-#define _INCLUDE_PALMLD_H_
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMLD_GPIO_RESET	1
-#define GPIO_NR_PALMLD_POWER_DETECT	4
-#define GPIO_NR_PALMLD_HOTSYNC_BUTTON_N	10
-#define GPIO_NR_PALMLD_POWER_SWITCH	12
-#define GPIO_NR_PALMLD_EARPHONE_DETECT 	13
-#define GPIO_NR_PALMLD_LOCK_SWITCH	15
-
-/* SD/MMC */
-#define GPIO_NR_PALMLD_SD_DETECT_N	14
-#define GPIO_NR_PALMLD_SD_POWER		114
-#define GPIO_NR_PALMLD_SD_READONLY	116
-
-/* TOUCHSCREEN */
-#define GPIO_NR_PALMLD_WM9712_IRQ	27
-
-/* IRDA */
-#define GPIO_NR_PALMLD_IR_DISABLE	108
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMLD_BL_POWER		19
-#define GPIO_NR_PALMLD_LCD_POWER	96
-
-/* LCD BORDER */
-#define GPIO_NR_PALMLD_BORDER_SWITCH	21
-#define GPIO_NR_PALMLD_BORDER_SELECT	22
-
-/* BLUETOOTH */
-#define GPIO_NR_PALMLD_BT_POWER		17
-#define GPIO_NR_PALMLD_BT_RESET		83
-
-/* PCMCIA (WiFi) */
-#define GPIO_NR_PALMLD_PCMCIA_READY	38
-#define GPIO_NR_PALMLD_PCMCIA_POWER	36
-#define GPIO_NR_PALMLD_PCMCIA_RESET	81
-
-/* LEDs */
-#define GPIO_NR_PALMLD_LED_GREEN	52
-#define GPIO_NR_PALMLD_LED_AMBER	94
-
-/* IDE */
-#define GPIO_NR_PALMLD_IDE_RESET	98
-#define GPIO_NR_PALMLD_IDE_PWEN		115
-
-/* USB */
-#define GPIO_NR_PALMLD_USB_DETECT_N	3
-#define GPIO_NR_PALMLD_USB_READY	86
-#define GPIO_NR_PALMLD_USB_RESET	88
-#define GPIO_NR_PALMLD_USB_INT		106
-#define GPIO_NR_PALMLD_USB_POWER	118
-/* 20, 53 and 86 are usb related too */
-
-/* INTERRUPTS */
-#define IRQ_GPIO_PALMLD_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_GPIO_RESET)
-#define IRQ_GPIO_PALMLD_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_SD_DETECT_N)
-#define IRQ_GPIO_PALMLD_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_WM9712_IRQ)
-#define IRQ_GPIO_PALMLD_IDE_IRQ		PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_IDE_IRQ)
-
-
-/** HERE ARE INIT VALUES **/
-
-/* IO mappings */
-#define PALMLD_USB_PHYS		PXA_CS2_PHYS
-#define PALMLD_USB_VIRT		0xf0000000
-#define PALMLD_USB_SIZE		0x00100000
-
-#define PALMLD_IDE_PHYS		0x20000000
-#define PALMLD_IDE_VIRT		0xf1000000
-#define PALMLD_IDE_SIZE		0x00100000
-
-#define PALMLD_PHYS_IO_START	0x40000000
-#define PALMLD_STR_BASE		0xa0200000
-
-/* BATTERY */
-#define PALMLD_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
-#define PALMLD_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
-#define PALMLD_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMLD_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMLD_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMLD_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMLD_MAX_LIFE_MINS		240	/* on-life in minutes */
-
-#define PALMLD_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMLD_MAX_INTENSITY		0xFE
-#define PALMLD_DEFAULT_INTENSITY	0x7E
-#define PALMLD_LIMIT_MASK		0x7F
-#define PALMLD_PRESCALER		0x3F
-#define PALMLD_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
deleted file mode 100644
index 9257a02c46e5..000000000000
--- a/arch/arm/mach-pxa/include/mach/palmtc.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/include/asm-arm/arch-pxa/palmtc-gpio.h
- *
- * GPIOs and interrupts for Palm Tungsten|C Handheld Computer
- *
- * Authors:	Alex Osborne <bobofdoom@gmail.com>
- *		Marek Vasut <marek.vasut@gmail.com>
- *		Holger Bocklet <bitz.email@gmx.net>
- */
-
-#ifndef _INCLUDE_PALMTC_H_
-#define _INCLUDE_PALMTC_H_
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMTC_EARPHONE_DETECT	2
-#define GPIO_NR_PALMTC_CRADLE_DETECT	5
-#define GPIO_NR_PALMTC_HOTSYNC_BUTTON	7
-
-/* SD/MMC */
-#define GPIO_NR_PALMTC_SD_DETECT_N	12
-#define GPIO_NR_PALMTC_SD_POWER		32
-#define GPIO_NR_PALMTC_SD_READONLY	54
-
-/* WLAN */
-#define GPIO_NR_PALMTC_PCMCIA_READY	13
-#define GPIO_NR_PALMTC_PCMCIA_PWRREADY	14
-#define GPIO_NR_PALMTC_PCMCIA_POWER1	15
-#define GPIO_NR_PALMTC_PCMCIA_POWER2	33
-#define GPIO_NR_PALMTC_PCMCIA_POWER3	55
-#define GPIO_NR_PALMTC_PCMCIA_RESET	78
-
-/* UDC */
-#define GPIO_NR_PALMTC_USB_DETECT_N	4
-#define GPIO_NR_PALMTC_USB_POWER	36
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMTC_BL_POWER		16
-#define GPIO_NR_PALMTC_LCD_POWER	44
-#define GPIO_NR_PALMTC_LCD_BLANK	38
-
-/* UART */
-#define GPIO_NR_PALMTC_RS232_POWER	37
-
-/* IRDA */
-#define GPIO_NR_PALMTC_IR_DISABLE	45
-
-/* IRQs */
-#define IRQ_GPIO_PALMTC_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_SD_DETECT_N)
-#define IRQ_GPIO_PALMTC_WLAN_READY	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_WLAN_READY)
-
-/* UCB1400 GPIOs */
-#define GPIO_NR_PALMTC_POWER_DETECT	(0x80 | 0x00)
-#define GPIO_NR_PALMTC_HEADPHONE_DETECT	(0x80 | 0x01)
-#define GPIO_NR_PALMTC_SPEAKER_ENABLE	(0x80 | 0x03)
-#define GPIO_NR_PALMTC_VIBRA_POWER	(0x80 | 0x05)
-#define GPIO_NR_PALMTC_LED_POWER	(0x80 | 0x07)
-
-/** HERE ARE INIT VALUES **/
-#define PALMTC_UCB1400_GPIO_OFFSET	0x80
-
-/* BATTERY */
-#define PALMTC_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
-#define PALMTC_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
-#define PALMTC_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMTC_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMTC_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMTC_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMTC_MAX_LIFE_MINS		240	/* on-life in minutes */
-
-#define PALMTC_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMTC_MAX_INTENSITY		0xFE
-#define PALMTC_DEFAULT_INTENSITY	0x7E
-#define PALMTC_LIMIT_MASK		0x7F
-#define PALMTC_PRESCALER		0x3F
-#define PALMTC_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
deleted file mode 100644
index ec88abf0fc6c..000000000000
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm T|X Handheld Computer
- *
- * Based on palmld-gpio.h by Alex Osborne
- *
- * Authors:	Marek Vasut <marek.vasut@gmail.com>
- *		Cristiano P. <cristianop@users.sourceforge.net>
- *		Jan Herman <2hp@seznam.cz>
- */
-
-#ifndef _INCLUDE_PALMTX_H_
-#define _INCLUDE_PALMTX_H_
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMTX_GPIO_RESET		1
-
-#define GPIO_NR_PALMTX_POWER_DETECT		12 /* 90 */
-#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N		10
-#define GPIO_NR_PALMTX_EARPHONE_DETECT		107
-
-/* SD/MMC */
-#define GPIO_NR_PALMTX_SD_DETECT_N		14
-#define GPIO_NR_PALMTX_SD_POWER			114 /* probably */
-#define GPIO_NR_PALMTX_SD_READONLY		115 /* probably */
-
-/* TOUCHSCREEN */
-#define GPIO_NR_PALMTX_WM9712_IRQ		27
-
-/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMTX_IR_DISABLE		40
-
-/* USB */
-#define GPIO_NR_PALMTX_USB_DETECT_N		13
-#define GPIO_NR_PALMTX_USB_PULLUP		93
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMTX_BL_POWER			84
-#define GPIO_NR_PALMTX_LCD_POWER		96
-
-/* LCD BORDER */
-#define GPIO_NR_PALMTX_BORDER_SWITCH		98
-#define GPIO_NR_PALMTX_BORDER_SELECT		22
-
-/* BLUETOOTH */
-#define GPIO_NR_PALMTX_BT_POWER			17
-#define GPIO_NR_PALMTX_BT_RESET			83
-
-/* PCMCIA (WiFi) */
-#define GPIO_NR_PALMTX_PCMCIA_POWER1		94
-#define GPIO_NR_PALMTX_PCMCIA_POWER2		108
-#define GPIO_NR_PALMTX_PCMCIA_RESET		79
-#define GPIO_NR_PALMTX_PCMCIA_READY		116
-
-/* NAND Flash ... this GPIO may be incorrect! */
-#define GPIO_NR_PALMTX_NAND_BUFFER_DIR		79
-
-/* INTERRUPTS */
-#define IRQ_GPIO_PALMTX_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_SD_DETECT_N)
-#define IRQ_GPIO_PALMTX_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_WM9712_IRQ)
-#define IRQ_GPIO_PALMTX_USB_DETECT	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_USB_DETECT)
-#define IRQ_GPIO_PALMTX_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_GPIO_RESET)
-
-/** HERE ARE INIT VALUES **/
-
-/* Various addresses  */
-#define PALMTX_PCMCIA_PHYS	0x28000000
-#define PALMTX_PCMCIA_VIRT	IOMEM(0xf0000000)
-#define PALMTX_PCMCIA_SIZE	0x100000
-
-#define PALMTX_PHYS_RAM_START	0xa0000000
-#define PALMTX_PHYS_IO_START	0x40000000
-
-#define PALMTX_STR_BASE		0xa0200000
-
-#define PALMTX_PHYS_FLASH_START	PXA_CS0_PHYS	/* ChipSelect 0 */
-#define PALMTX_PHYS_NAND_START	PXA_CS1_PHYS	/* ChipSelect 1 */
-
-#define PALMTX_NAND_ALE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 24))
-#define PALMTX_NAND_CLE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 25))
-#define PALMTX_NAND_ALE_VIRT	IOMEM(0xff100000)
-#define PALMTX_NAND_CLE_VIRT	IOMEM(0xff200000)
-
-/* TOUCHSCREEN */
-#define AC97_LINK_FRAME			21
-
-
-/* BATTERY */
-#define PALMTX_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMTX_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMTX_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMTX_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMTX_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMTX_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMTX_MAX_LIFE_MINS		360	/* on-life in minutes */
-
-#define PALMTX_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMTX_MAX_INTENSITY		0xFE
-#define PALMTX_DEFAULT_INTENSITY	0x7E
-#define PALMTX_LIMIT_MASK		0x7F
-#define PALMTX_PRESCALER		0x3F
-#define PALMTX_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
deleted file mode 100644
index b56b19351a03..000000000000
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/poodle.h
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Based on:
- *   arch/arm/mach-sa1100/include/mach/collie.h
- *
- * ChangeLog:
- *   04-06-2001 Lineo Japan, Inc.
- *   04-16-2001 SHARP Corporation
- *   Update to 2.6 John Lenz
- */
-#ifndef __ASM_ARCH_POODLE_H
-#define __ASM_ARCH_POODLE_H  1
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/*
- * GPIOs
- */
-/* PXA GPIOs */
-#define POODLE_GPIO_ON_KEY		(0)
-#define POODLE_GPIO_AC_IN		(1)
-#define POODLE_GPIO_CO			16
-#define POODLE_GPIO_TP_INT		(5)
-#define POODLE_GPIO_TP_CS		(24)
-#define POODLE_GPIO_WAKEUP		(11)	/* change battery */
-#define POODLE_GPIO_GA_INT		(10)
-#define POODLE_GPIO_IR_ON		(22)
-#define POODLE_GPIO_HP_IN		(4)
-#define POODLE_GPIO_CF_IRQ		(17)
-#define POODLE_GPIO_CF_CD		(14)
-#define POODLE_GPIO_CF_STSCHG		(14)
-#define POODLE_GPIO_SD_PWR		(33)
-#define POODLE_GPIO_SD_PWR1		(3)
-#define POODLE_GPIO_nSD_CLK		(6)
-#define POODLE_GPIO_nSD_WP		(7)
-#define POODLE_GPIO_nSD_INT		(8)
-#define POODLE_GPIO_nSD_DETECT		(9)
-#define POODLE_GPIO_MAIN_BAT_LOW	(13)
-#define POODLE_GPIO_BAT_COVER		(13)
-#define POODLE_GPIO_USB_PULLUP		(20)
-#define POODLE_GPIO_ADC_TEMP_ON		(21)
-#define POODLE_GPIO_BYPASS_ON		(36)
-#define POODLE_GPIO_CHRG_ON		(38)
-#define POODLE_GPIO_CHRG_FULL		(16)
-#define POODLE_GPIO_DISCHARGE_ON        (42) /* Enable battery discharge */
-
-/* PXA GPIOs */
-#define POODLE_IRQ_GPIO_ON_KEY		PXA_GPIO_TO_IRQ(0)
-#define POODLE_IRQ_GPIO_AC_IN		PXA_GPIO_TO_IRQ(1)
-#define POODLE_IRQ_GPIO_HP_IN		PXA_GPIO_TO_IRQ(4)
-#define POODLE_IRQ_GPIO_CO		PXA_GPIO_TO_IRQ(16)
-#define POODLE_IRQ_GPIO_TP_INT		PXA_GPIO_TO_IRQ(5)
-#define POODLE_IRQ_GPIO_WAKEUP		PXA_GPIO_TO_IRQ(11)
-#define POODLE_IRQ_GPIO_GA_INT		PXA_GPIO_TO_IRQ(10)
-#define POODLE_IRQ_GPIO_CF_IRQ		PXA_GPIO_TO_IRQ(17)
-#define POODLE_IRQ_GPIO_CF_CD		PXA_GPIO_TO_IRQ(14)
-#define POODLE_IRQ_GPIO_nSD_INT		PXA_GPIO_TO_IRQ(8)
-#define POODLE_IRQ_GPIO_nSD_DETECT	PXA_GPIO_TO_IRQ(9)
-#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	PXA_GPIO_TO_IRQ(13)
-
-/* SCOOP GPIOs */
-#define POODLE_SCOOP_CHARGE_ON	SCOOP_GPCR_PA11
-#define POODLE_SCOOP_CP401	SCOOP_GPCR_PA13
-#define POODLE_SCOOP_VPEN	SCOOP_GPCR_PA18
-#define POODLE_SCOOP_L_PCLK	SCOOP_GPCR_PA20
-#define POODLE_SCOOP_L_LCLK	SCOOP_GPCR_PA21
-#define POODLE_SCOOP_HS_OUT	SCOOP_GPCR_PA22
-
-#define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
-#define POODLE_SCOOP_IO_OUT	( 0 )
-
-#define POODLE_SCOOP_GPIO_BASE	(PXA_NR_BUILTIN_GPIO)
-#define POODLE_GPIO_CHARGE_ON	(POODLE_SCOOP_GPIO_BASE + 0)
-#define POODLE_GPIO_CP401	(POODLE_SCOOP_GPIO_BASE + 2)
-#define POODLE_GPIO_VPEN	(POODLE_SCOOP_GPIO_BASE + 7)
-#define POODLE_GPIO_L_PCLK	(POODLE_SCOOP_GPIO_BASE + 9)
-#define POODLE_GPIO_L_LCLK	(POODLE_SCOOP_GPIO_BASE + 10)
-#define POODLE_GPIO_HS_OUT	(POODLE_SCOOP_GPIO_BASE + 11)
-
-#define POODLE_LOCOMO_GPIO_AMP_ON      LOCOMO_GPIO(8)
-#define POODLE_LOCOMO_GPIO_MUTE_L      LOCOMO_GPIO(10)
-#define POODLE_LOCOMO_GPIO_MUTE_R      LOCOMO_GPIO(11)
-#define POODLE_LOCOMO_GPIO_232VCC_ON   LOCOMO_GPIO(12)
-#define POODLE_LOCOMO_GPIO_JK_B        LOCOMO_GPIO(13)
-
-#define POODLE_NR_IRQS		(IRQ_BOARD_START + 4)	/* 4 for LoCoMo */
-
-extern struct platform_device poodle_locomo_device;
-
-#endif /* __ASM_ARCH_POODLE_H  */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
deleted file mode 100644
index 070f6c74196e..000000000000
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
- *
- * PXA3xx specific register definitions
- *
- * Copyright (C) 2007 Marvell International Ltd.
- */
-
-#ifndef __ASM_ARCH_PXA3XX_REGS_H
-#define __ASM_ARCH_PXA3XX_REGS_H
-
-#include <mach/hardware.h>
-
-/*
- * Oscillator Configuration Register (OSCC)
- */
-#define OSCC           io_p2v(0x41350000)  /* Oscillator Configuration Register */
-
-#define OSCC_PEN       (1 << 11)       /* 13MHz POUT */
-
-
-/*
- * Service Power Management Unit (MPMU)
- */
-#define PMCR		__REG(0x40F50000)	/* Power Manager Control Register */
-#define PSR		__REG(0x40F50004)	/* Power Manager S2 Status Register */
-#define PSPR		__REG(0x40F50008)	/* Power Manager Scratch Pad Register */
-#define PCFR		__REG(0x40F5000C)	/* Power Manager General Configuration Register */
-#define PWER		__REG(0x40F50010)	/* Power Manager Wake-up Enable Register */
-#define PWSR		__REG(0x40F50014)	/* Power Manager Wake-up Status Register */
-#define PECR		__REG(0x40F50018)	/* Power Manager EXT_WAKEUP[1:0] Control Register */
-#define DCDCSR		__REG(0x40F50080)	/* DC-DC Controller Status Register */
-#define PVCR		__REG(0x40F50100)	/* Power Manager Voltage Change Control Register */
-#define PCMD(x)		__REG(0x40F50110 + ((x) << 2))
-
-/*
- * Slave Power Management Unit
- */
-#define ASCR		__REG(0x40f40000)	/* Application Subsystem Power Status/Configuration */
-#define ARSR		__REG(0x40f40004)	/* Application Subsystem Reset Status */
-#define AD3ER		__REG(0x40f40008)	/* Application Subsystem Wake-Up from D3 Enable */
-#define AD3SR		__REG(0x40f4000c)	/* Application Subsystem Wake-Up from D3 Status */
-#define AD2D0ER		__REG(0x40f40010)	/* Application Subsystem Wake-Up from D2 to D0 Enable */
-#define AD2D0SR		__REG(0x40f40014)	/* Application Subsystem Wake-Up from D2 to D0 Status */
-#define AD2D1ER		__REG(0x40f40018)	/* Application Subsystem Wake-Up from D2 to D1 Enable */
-#define AD2D1SR		__REG(0x40f4001c)	/* Application Subsystem Wake-Up from D2 to D1 Status */
-#define AD1D0ER		__REG(0x40f40020)	/* Application Subsystem Wake-Up from D1 to D0 Enable */
-#define AD1D0SR		__REG(0x40f40024)	/* Application Subsystem Wake-Up from D1 to D0 Status */
-#define AGENP		__REG(0x40f4002c)	/* Application Subsystem General Purpose */
-#define AD3R		__REG(0x40f40030)	/* Application Subsystem D3 Configuration */
-#define AD2R		__REG(0x40f40034)	/* Application Subsystem D2 Configuration */
-#define AD1R		__REG(0x40f40038)	/* Application Subsystem D1 Configuration */
-
-/*
- * Application Subsystem Configuration bits.
- */
-#define ASCR_RDH		(1 << 31)
-#define ASCR_D1S		(1 << 2)
-#define ASCR_D2S		(1 << 1)
-#define ASCR_D3S		(1 << 0)
-
-/*
- * Application Reset Status bits.
- */
-#define ARSR_GPR		(1 << 3)
-#define ARSR_LPMR		(1 << 2)
-#define ARSR_WDT		(1 << 1)
-#define ARSR_HWR		(1 << 0)
-
-/*
- * Application Subsystem Wake-Up bits.
- */
-#define ADXER_WRTC		(1 << 31)	/* RTC */
-#define ADXER_WOST		(1 << 30)	/* OS Timer */
-#define ADXER_WTSI		(1 << 29)	/* Touchscreen */
-#define ADXER_WUSBH		(1 << 28)	/* USB host */
-#define ADXER_WUSB2		(1 << 26)	/* USB client 2.0 */
-#define ADXER_WMSL0		(1 << 24)	/* MSL port 0*/
-#define ADXER_WDMUX3		(1 << 23)	/* USB EDMUX3 */
-#define ADXER_WDMUX2		(1 << 22)	/* USB EDMUX2 */
-#define ADXER_WKP		(1 << 21)	/* Keypad */
-#define ADXER_WUSIM1		(1 << 20)	/* USIM Port 1 */
-#define ADXER_WUSIM0		(1 << 19)	/* USIM Port 0 */
-#define ADXER_WOTG		(1 << 16)	/* USBOTG input */
-#define ADXER_MFP_WFLASH	(1 << 15)	/* MFP: Data flash busy */
-#define ADXER_MFP_GEN12		(1 << 14)	/* MFP: MMC3/GPIO/OST inputs */
-#define ADXER_MFP_WMMC2		(1 << 13)	/* MFP: MMC2 */
-#define ADXER_MFP_WMMC1		(1 << 12)	/* MFP: MMC1 */
-#define ADXER_MFP_WI2C		(1 << 11)	/* MFP: I2C */
-#define ADXER_MFP_WSSP4		(1 << 10)	/* MFP: SSP4 */
-#define ADXER_MFP_WSSP3		(1 << 9)	/* MFP: SSP3 */
-#define ADXER_MFP_WMAXTRIX	(1 << 8)	/* MFP: matrix keypad */
-#define ADXER_MFP_WUART3	(1 << 7)	/* MFP: UART3 */
-#define ADXER_MFP_WUART2	(1 << 6)	/* MFP: UART2 */
-#define ADXER_MFP_WUART1	(1 << 5)	/* MFP: UART1 */
-#define ADXER_MFP_WSSP2		(1 << 4)	/* MFP: SSP2 */
-#define ADXER_MFP_WSSP1		(1 << 3)	/* MFP: SSP1 */
-#define ADXER_MFP_WAC97		(1 << 2)	/* MFP: AC97 */
-#define ADXER_WEXTWAKE1		(1 << 1)	/* External Wake 1 */
-#define ADXER_WEXTWAKE0		(1 << 0)	/* External Wake 0 */
-
-/*
- * AD3R/AD2R/AD1R bits.  R2-R5 are only defined for PXA320.
- */
-#define ADXR_L2			(1 << 8)
-#define ADXR_R5			(1 << 5)
-#define ADXR_R4			(1 << 4)
-#define ADXR_R3			(1 << 3)
-#define ADXR_R2			(1 << 2)
-#define ADXR_R1			(1 << 1)
-#define ADXR_R0			(1 << 0)
-
-/*
- * Values for PWRMODE CP15 register
- */
-#define PXA3xx_PM_S3D4C4	0x07	/* aka deep sleep */
-#define PXA3xx_PM_S2D3C4	0x06	/* aka sleep */
-#define PXA3xx_PM_S0D2C2	0x03	/* aka standby */
-#define PXA3xx_PM_S0D1C2	0x02	/* aka LCD refresh */
-#define PXA3xx_PM_S0D0C1	0x01
-
-/*
- * Application Subsystem Clock
- */
-#define ACCR		__REG(0x41340000)	/* Application Subsystem Clock Configuration Register */
-#define ACSR		__REG(0x41340004)	/* Application Subsystem Clock Status Register */
-#define AICSR		__REG(0x41340008)	/* Application Subsystem Interrupt Control/Status Register */
-#define CKENA		__REG(0x4134000C)	/* A Clock Enable Register */
-#define CKENB		__REG(0x41340010)	/* B Clock Enable Register */
-#define CKENC		__REG(0x41340024)	/* C Clock Enable Register */
-#define AC97_DIV	__REG(0x41340014)	/* AC97 clock divisor value register */
-
-#define ACCR_XPDIS		(1 << 31)	/* Core PLL Output Disable */
-#define ACCR_SPDIS		(1 << 30)	/* System PLL Output Disable */
-#define ACCR_D0CS		(1 << 26)	/* D0 Mode Clock Select */
-#define ACCR_PCCE		(1 << 11)	/* Power Mode Change Clock Enable */
-#define ACCR_DDR_D0CS		(1 << 7)	/* DDR SDRAM clock frequency in D0CS (PXA31x only) */
-
-#define ACCR_SMCFS_MASK		(0x7 << 23)	/* Static Memory Controller Frequency Select */
-#define ACCR_SFLFS_MASK		(0x3 << 18)	/* Frequency Select for Internal Memory Controller */
-#define ACCR_XSPCLK_MASK	(0x3 << 16)	/* Core Frequency during Frequency Change */
-#define ACCR_HSS_MASK		(0x3 << 14)	/* System Bus-Clock Frequency Select */
-#define ACCR_DMCFS_MASK		(0x3 << 12)	/* Dynamic Memory Controller Clock Frequency Select */
-#define ACCR_XN_MASK		(0x7 << 8)	/* Core PLL Turbo-Mode-to-Run-Mode Ratio */
-#define ACCR_XL_MASK		(0x1f)		/* Core PLL Run-Mode-to-Oscillator Ratio */
-
-#define ACCR_SMCFS(x)		(((x) & 0x7) << 23)
-#define ACCR_SFLFS(x)		(((x) & 0x3) << 18)
-#define ACCR_XSPCLK(x)		(((x) & 0x3) << 16)
-#define ACCR_HSS(x)		(((x) & 0x3) << 14)
-#define ACCR_DMCFS(x)		(((x) & 0x3) << 12)
-#define ACCR_XN(x)		(((x) & 0x7) << 8)
-#define ACCR_XL(x)		((x) & 0x1f)
-
-/*
- * Clock Enable Bit
- */
-#define CKEN_LCD	1	/* < LCD Clock Enable */
-#define CKEN_USBH	2	/* < USB host clock enable */
-#define CKEN_CAMERA	3	/* < Camera interface clock enable */
-#define CKEN_NAND	4	/* < NAND Flash Controller Clock Enable */
-#define CKEN_USB2	6	/* < USB 2.0 client clock enable. */
-#define CKEN_DMC	8	/* < Dynamic Memory Controller clock enable */
-#define CKEN_SMC	9	/* < Static Memory Controller clock enable */
-#define CKEN_ISC	10	/* < Internal SRAM Controller clock enable */
-#define CKEN_BOOT	11	/* < Boot rom clock enable */
-#define CKEN_MMC1	12	/* < MMC1 Clock enable */
-#define CKEN_MMC2	13	/* < MMC2 clock enable */
-#define CKEN_KEYPAD	14	/* < Keypand Controller Clock Enable */
-#define CKEN_CIR	15	/* < Consumer IR Clock Enable */
-#define CKEN_USIM0	17	/* < USIM[0] Clock Enable */
-#define CKEN_USIM1	18	/* < USIM[1] Clock Enable */
-#define CKEN_TPM	19	/* < TPM clock enable */
-#define CKEN_UDC	20	/* < UDC clock enable */
-#define CKEN_BTUART	21	/* < BTUART clock enable */
-#define CKEN_FFUART	22	/* < FFUART clock enable */
-#define CKEN_STUART	23	/* < STUART clock enable */
-#define CKEN_AC97	24	/* < AC97 clock enable */
-#define CKEN_TOUCH	25	/* < Touch screen Interface Clock Enable */
-#define CKEN_SSP1	26	/* < SSP1 clock enable */
-#define CKEN_SSP2	27	/* < SSP2 clock enable */
-#define CKEN_SSP3	28	/* < SSP3 clock enable */
-#define CKEN_SSP4	29	/* < SSP4 clock enable */
-#define CKEN_MSL0	30	/* < MSL0 clock enable */
-#define CKEN_PWM0	32	/* < PWM[0] clock enable */
-#define CKEN_PWM1	33	/* < PWM[1] clock enable */
-#define CKEN_I2C	36	/* < I2C clock enable */
-#define CKEN_INTC	38	/* < Interrupt controller clock enable */
-#define CKEN_GPIO	39	/* < GPIO clock enable */
-#define CKEN_1WIRE	40	/* < 1-wire clock enable */
-#define CKEN_HSIO2	41	/* < HSIO2 clock enable */
-#define CKEN_MINI_IM	48	/* < Mini-IM */
-#define CKEN_MINI_LCD	49	/* < Mini LCD */
-
-#define CKEN_MMC3	5	/* < MMC3 Clock Enable */
-#define CKEN_MVED	43	/* < MVED clock enable */
-
-/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
-#define CKEN_PXA300_GCU		42	/* Graphics controller clock enable */
-#define CKEN_PXA320_GCU		7	/* Graphics controller clock enable */
-
-#endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ac97.h b/arch/arm/mach-pxa/include/mach/regs-ac97.h
deleted file mode 100644
index 1db96fd4df32..000000000000
--- a/arch/arm/mach-pxa/include/mach/regs-ac97.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_REGS_AC97_H
-#define __ASM_ARCH_REGS_AC97_H
-
-#include <mach/hardware.h>
-
-/*
- * AC97 Controller registers
- */
-
-#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
-#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define PICR		__REG(0x40500004)  /* PCM In Control Register */
-#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
-#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
-#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define GCR		__REG(0x4050000C)  /* Global Control Register */
-#ifdef CONFIG_PXA3xx
-#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
-#endif
-#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
-#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
-#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
-#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
-#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
-#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
-#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
-#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
-#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
-#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
-#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
-
-#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
-#define POSR_FIFOE	(1 << 4)	/* FIFO error */
-#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define PISR		__REG(0x40500014)  /* PCM In Status Register */
-#define PISR_FIFOE	(1 << 4)	/* FIFO error */
-#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
-#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define GSR		__REG(0x4050001C)  /* Global Status Register */
-#define GSR_CDONE	(1 << 19)	/* Command Done */
-#define GSR_SDONE	(1 << 18)	/* Status Done */
-#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
-#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
-#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
-#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
-#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
-#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
-#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
-#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
-#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
-#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
-#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
-#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
-#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
-#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
-#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
-
-#define CAR		__REG(0x40500020)  /* CODEC Access Register */
-#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
-
-#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
-#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */
-
-#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
-#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
-#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MICR		__REG(0x40500108)  /* Modem In Control Register */
-#define MICR_FEIE	(1 << 3)	/* FIFO Error */
-#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
-
-#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
-#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
-#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MISR		__REG(0x40500118)  /* Modem In Status Register */
-#define MISR_FIFOE	(1 << 4)	/* FIFO error */
-#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
-#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
-
-#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */
-
-#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
-#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
-#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
-#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
-
-#endif /* __ASM_ARCH_REGS_AC97_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h
deleted file mode 100644
index e2b6e3d1f625..000000000000
--- a/arch/arm/mach-pxa/include/mach/regs-lcd.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_REGS_LCD_H
-#define __ASM_ARCH_REGS_LCD_H
-
-#include <mach/bitfield.h>
-
-/*
- * LCD Controller Registers and Bits Definitions
- */
-#define LCCR0		(0x000)	/* LCD Controller Control Register 0 */
-#define LCCR1		(0x004)	/* LCD Controller Control Register 1 */
-#define LCCR2		(0x008)	/* LCD Controller Control Register 2 */
-#define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
-#define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
-#define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
-#define LCSR		(0x038)	/* LCD Controller Status Register 0 */
-#define LCSR1		(0x034)	/* LCD Controller Status Register 1 */
-#define LIIDR		(0x03C)	/* LCD Controller Interrupt ID Register */
-#define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
-#define TMEDCR		(0x044)	/* TMED Control Register */
-
-#define FBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
-#define FBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
-#define FBR2		(0x028) /* DMA Channel 2 Frame Branch Register */
-#define FBR3		(0x02C) /* DMA Channel 2 Frame Branch Register */
-#define FBR4		(0x030) /* DMA Channel 2 Frame Branch Register */
-#define FBR5		(0x110) /* DMA Channel 2 Frame Branch Register */
-#define FBR6		(0x114) /* DMA Channel 2 Frame Branch Register */
-
-#define OVL1C1		(0x050)	/* Overlay 1 Control Register 1 */
-#define OVL1C2		(0x060)	/* Overlay 1 Control Register 2 */
-#define OVL2C1		(0x070)	/* Overlay 2 Control Register 1 */
-#define OVL2C2		(0x080)	/* Overlay 2 Control Register 2 */
-
-#define CMDCR		(0x100)	/* Command Control Register */
-#define PRSR		(0x104)	/* Panel Read Status Register */
-
-#define LCCR3_BPP(x)	((((x) & 0x7) << 24) | (((x) & 0x8) ? (1 << 29) : 0))
-
-#define LCCR3_PDFOR_0	(0 << 30)
-#define LCCR3_PDFOR_1	(1 << 30)
-#define LCCR3_PDFOR_2	(2 << 30)
-#define LCCR3_PDFOR_3	(3 << 30)
-
-#define LCCR4_PAL_FOR_0	(0 << 15)
-#define LCCR4_PAL_FOR_1	(1 << 15)
-#define LCCR4_PAL_FOR_2	(2 << 15)
-#define LCCR4_PAL_FOR_3	(3 << 15)
-#define LCCR4_PAL_FOR_MASK	(3 << 15)
-
-#define FDADR0		(0x200)	/* DMA Channel 0 Frame Descriptor Address Register */
-#define FDADR1		(0x210)	/* DMA Channel 1 Frame Descriptor Address Register */
-#define FDADR2		(0x220)	/* DMA Channel 2 Frame Descriptor Address Register */
-#define FDADR3		(0x230)	/* DMA Channel 3 Frame Descriptor Address Register */
-#define FDADR4		(0x240)	/* DMA Channel 4 Frame Descriptor Address Register */
-#define FDADR5		(0x250)	/* DMA Channel 5 Frame Descriptor Address Register */
-#define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
-
-#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
-#define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
-#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display */
-#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display */
-#define LCCR0_SDS	(1 << 2)	/* Single/Dual Panel Display Select */
-#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display */
-#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display */
-
-#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
-#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
-#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
-#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
-#define LCCR0_PAS	(1 << 7)	/* Passive/Active display Select */
-#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN) */
-#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT) */
-#define LCCR0_DPD	(1 << 9)	/* Double Pixel Data (monochrome) */
-#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome display */
-#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome display */
-#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
-#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
-#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
-#define LCCR0_PDD_S	12
-#define LCCR0_BM	(1 << 20)	/* Branch mask */
-#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
-#define LCCR0_LCDT	(1 << 22)	/* LCD panel type */
-#define LCCR0_RDSTM	(1 << 23)	/* Read status interrupt mask */
-#define LCCR0_CMDIM	(1 << 24)	/* Command interrupt mask */
-#define LCCR0_OUC	(1 << 25)	/* Overlay Underlay control bit */
-#define LCCR0_LDDALT	(1 << 26)	/* LDD alternate mapping control */
-
-#define LCCR1_PPL	Fld (10, 0)	/* Pixels Per Line - 1 */
-#define LCCR1_DisWdth(Pixel)	(((Pixel) - 1) << FShft (LCCR1_PPL))
-
-#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization */
-#define LCCR1_HorSnchWdth(Tpix)	(((Tpix) - 1) << FShft (LCCR1_HSW))
-
-#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait - 1 */
-#define LCCR1_EndLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_ELW))
-
-#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock */
-#define LCCR1_BegLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_BLW))
-
-#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1 */
-#define LCCR2_DisHght(Line)	(((Line) - 1) << FShft (LCCR2_LPP))
-
-#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse - 1 */
-#define LCCR2_VrtSnchWdth(Tln)	(((Tln) - 1) << FShft (LCCR2_VSW))
-
-#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait */
-#define LCCR2_EndFrmDel(Tln)	((Tln) << FShft (LCCR2_EFW))
-
-#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock */
-#define LCCR2_BegFrmDel(Tln)	((Tln) << FShft (LCCR2_BFW))
-
-#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
-#define LCCR3_API_S	16
-#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
-#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
-#define LCCR3_PCP	(1 << 22)	/* Pixel Clock Polarity (L_PCLK) */
-#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge */
-#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge */
-
-#define LCCR3_OEP	(1 << 23)	/* Output Enable Polarity */
-#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High */
-#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low */
-
-#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
-#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
-#define LCCR3_PixClkDiv(Div)	(((Div) << FShft (LCCR3_PCD)))
-
-#define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
-#define LCCR3_Acb(Acb)	(((Acb) << FShft (LCCR3_ACB)))
-
-#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  HSP Active High */
-#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  HSP Active Low */
-
-#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  VSP Active High */
-#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  VSP Active Low */
-
-#define LCCR5_IUM(x)	(1 << ((x) + 23)) /* input underrun mask */
-#define LCCR5_BSM(x)	(1 << ((x) + 15)) /* branch mask */
-#define LCCR5_EOFM(x)	(1 << ((x) + 7))  /* end of frame mask */
-#define LCCR5_SOFM(x)	(1 << ((x) + 0))  /* start of frame mask */
-
-#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
-#define LCSR_SOF	(1 << 1)	/* Start of frame */
-#define LCSR_BER	(1 << 2)	/* Bus error */
-#define LCSR_ABC	(1 << 3)	/* AC Bias count */
-#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
-#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
-#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
-#define LCSR_QD		(1 << 7)	/* quick disable */
-#define LCSR_EOF	(1 << 8)	/* end of frame */
-#define LCSR_BS		(1 << 9)	/* branch status */
-#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
-#define LCSR_RD_ST	(1 << 11)	/* read status */
-#define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
-
-#define LCSR1_IU(x)	(1 << ((x) + 23)) /* Input FIFO underrun */
-#define LCSR1_BS(x)	(1 << ((x) + 15)) /* Branch Status */
-#define LCSR1_EOF(x)	(1 << ((x) + 7))  /* End of Frame Status */
-#define LCSR1_SOF(x)	(1 << ((x) - 1))  /* Start of Frame Status */
-
-#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
-
-/* overlay control registers */
-#define OVLxC1_PPL(x)	((((x) - 1) & 0x3ff) << 0)	/* Pixels Per Line */
-#define OVLxC1_LPO(x)	((((x) - 1) & 0x3ff) << 10)	/* Number of Lines */
-#define OVLxC1_BPP(x)	(((x) & 0xf) << 20)	/* Bits Per Pixel */
-#define OVLxC1_OEN	(1 << 31)		/* Enable bit for Overlay */
-#define OVLxC2_XPOS(x)	(((x) & 0x3ff) << 0)	/* Horizontal Position */
-#define OVLxC2_YPOS(x)	(((x) & 0x3ff) << 10)	/* Vertical Position */
-#define OVL2C2_PFOR(x)	(((x) & 0x7) << 20)	/* Pixel Format */
-
-/* smartpanel related */
-#define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
-#define PRSR_A0		(1 << 8)	/* Read Data Source */
-#define PRSR_ST_OK	(1 << 9)	/* Status OK */
-#define PRSR_CON_NT	(1 << 10)	/* Continue to Next Command */
-
-#define SMART_CMD_A0			 (0x1 << 8)
-#define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
-#define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
-#define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
-#define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
-#define SMART_CMD_NOOP			 (0x4 << 9)
-#define SMART_CMD_INTERRUPT		 (0x5 << 9)
-
-#define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
-#define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
-
-/* SMART_DELAY() is introduced for software controlled delay primitive which
- * can be inserted between command sequences, unused command 0x6 is used here
- * and delay ranges from 0ms ~ 255ms
- */
-#define SMART_CMD_DELAY		(0x6 << 9)
-#define SMART_DELAY(ms)		(SMART_CMD_DELAY | ((ms) & 0xff))
-#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-uart.h b/arch/arm/mach-pxa/include/mach/regs-uart.h
deleted file mode 100644
index 9a168f83afeb..000000000000
--- a/arch/arm/mach-pxa/include/mach/regs-uart.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_REGS_UART_H
-#define __ASM_ARCH_REGS_UART_H
-
-/*
- * UARTs
- */
-
-/* Full Function UART (FFUART) */
-#define FFUART		FFRBR
-#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
-#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
-#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
-#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
-#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
-#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
-#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
-#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
-#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
-#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
-#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
-#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Bluetooth UART (BTUART) */
-#define BTUART		BTRBR
-#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
-#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
-#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
-#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
-#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
-#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
-#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
-#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
-#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
-#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
-#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
-#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Standard UART (STUART) */
-#define STUART		STRBR
-#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
-#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
-#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
-#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
-#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
-#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
-#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
-#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
-#define STMSR		__REG(0x40700018)  /* Reserved */
-#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
-#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
-#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Hardware UART (HWUART) */
-#define HWUART		HWRBR
-#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
-#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
-#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
-#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
-#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
-#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
-#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
-#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
-#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
-#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
-#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
-#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
-#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
-#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
-#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
-#define IER_UUE		(1 << 6)	/* UART Unit Enable */
-#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
-#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
-#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
-#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
-#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
-#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
-#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
-#define IIR_TOD		(1 << 3)	/* Time Out Detected */
-#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
-#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
-#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
-
-#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
-#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
-#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
-#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
-#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1	(0)
-#define FCR_ITL_8	(FCR_ITL1)
-#define FCR_ITL_16	(FCR_ITL2)
-#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
-#define LCR_SB		(1 << 6)	/* Set Break */
-#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
-#define LCR_EPS		(1 << 4)	/* Even Parity Select */
-#define LCR_PEN		(1 << 3)	/* Parity Enable */
-#define LCR_STB		(1 << 2)	/* Stop Bit */
-#define LCR_WLS1	(1 << 1)	/* Word Length Select */
-#define LCR_WLS0	(1 << 0)	/* Word Length Select */
-
-#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
-#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
-#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
-#define LSR_BI		(1 << 4)	/* Break Interrupt */
-#define LSR_FE		(1 << 3)	/* Framing Error */
-#define LSR_PE		(1 << 2)	/* Parity Error */
-#define LSR_OE		(1 << 1)	/* Overrun Error */
-#define LSR_DR		(1 << 0)	/* Data Ready */
-
-#define MCR_LOOP	(1 << 4)
-#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
-#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
-#define MCR_RTS		(1 << 1)	/* Request to Send */
-#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
-
-#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
-#define MSR_RI		(1 << 6)	/* Ring Indicator */
-#define MSR_DSR		(1 << 5)	/* Data Set Ready */
-#define MSR_CTS		(1 << 4)	/* Clear To Send */
-#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
-#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
-#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
-#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
-
-/*
- * IrSR (Infrared Selection Register)
- */
-#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
-#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
-#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
-#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
-#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
-
-#endif /* __ASM_ARCH_REGS_UART_H */
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
deleted file mode 100644
index 8bfaca3a8b64..000000000000
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Hardware specific definitions for Sharp SL-C6000x series of PDAs
- *
- * Copyright (c) 2005 Dirk Opfer
- *
- * Based on Sharp's 2.4 kernel patches
- */
-#ifndef _ASM_ARCH_TOSA_H_
-#define _ASM_ARCH_TOSA_H_ 1
-
-#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
-
-/*  TOSA Chip selects  */
-#define TOSA_LCDC_PHYS		PXA_CS4_PHYS
-/* Internel Scoop */
-#define TOSA_CF_PHYS		(PXA_CS2_PHYS + 0x00800000)
-/* Jacket Scoop */
-#define TOSA_SCOOP_PHYS  	(PXA_CS5_PHYS + 0x00800000)
-
-#define TOSA_NR_IRQS		(IRQ_BOARD_START + TC6393XB_NR_IRQS)
-/*
- * SCOOP2 internal GPIOs
- */
-#define TOSA_SCOOP_GPIO_BASE		PXA_NR_BUILTIN_GPIO
-#define TOSA_SCOOP_PXA_VCORE1		SCOOP_GPCR_PA11
-#define TOSA_GPIO_TC6393XB_REST_IN	(TOSA_SCOOP_GPIO_BASE + 1)
-#define TOSA_GPIO_IR_POWERDWN		(TOSA_SCOOP_GPIO_BASE + 2)
-#define TOSA_GPIO_SD_WP			(TOSA_SCOOP_GPIO_BASE + 3)
-#define TOSA_GPIO_PWR_ON		(TOSA_SCOOP_GPIO_BASE + 4)
-#define TOSA_SCOOP_AUD_PWR_ON		SCOOP_GPCR_PA16
-#define TOSA_GPIO_BT_RESET		(TOSA_SCOOP_GPIO_BASE + 6)
-#define TOSA_GPIO_BT_PWR_EN		(TOSA_SCOOP_GPIO_BASE + 7)
-#define TOSA_SCOOP_AC_IN_OL		SCOOP_GPCR_PA19
-
-/* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_IO_DIR     (TOSA_SCOOP_PXA_VCORE1 | \
-		TOSA_SCOOP_AUD_PWR_ON)
-
-/*
- * SCOOP2 jacket GPIOs
- */
-#define TOSA_SCOOP_JC_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 12)
-#define TOSA_GPIO_BT_LED		(TOSA_SCOOP_JC_GPIO_BASE + 0)
-#define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
-#define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
-#define TOSA_GPIO_USB_PULLUP		(TOSA_SCOOP_JC_GPIO_BASE + 3)
-#define TOSA_GPIO_TC6393XB_SUSPEND	(TOSA_SCOOP_JC_GPIO_BASE + 4)
-#define TOSA_GPIO_TC6393XB_L3V_ON	(TOSA_SCOOP_JC_GPIO_BASE + 5)
-#define TOSA_SCOOP_JC_WLAN_DETECT	SCOOP_GPCR_PA17
-#define TOSA_GPIO_WLAN_LED		(TOSA_SCOOP_JC_GPIO_BASE + 7)
-#define TOSA_SCOOP_JC_CARD_LIMIT_SEL	SCOOP_GPCR_PA19
-
-/* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL)
-
-/*
- * TC6393XB GPIOs
- */
-#define TOSA_TC6393XB_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 2 * 12)
-
-#define TOSA_GPIO_TG_ON			(TOSA_TC6393XB_GPIO_BASE + 0)
-#define TOSA_GPIO_L_MUTE		(TOSA_TC6393XB_GPIO_BASE + 1)
-#define TOSA_GPIO_BL_C20MA		(TOSA_TC6393XB_GPIO_BASE + 3)
-#define TOSA_GPIO_CARD_VCC_ON		(TOSA_TC6393XB_GPIO_BASE + 4)
-#define TOSA_GPIO_CHARGE_OFF		(TOSA_TC6393XB_GPIO_BASE + 6)
-#define TOSA_GPIO_CHARGE_OFF_JC		(TOSA_TC6393XB_GPIO_BASE + 7)
-#define TOSA_GPIO_BAT0_V_ON		(TOSA_TC6393XB_GPIO_BASE + 9)
-#define TOSA_GPIO_BAT1_V_ON		(TOSA_TC6393XB_GPIO_BASE + 10)
-#define TOSA_GPIO_BU_CHRG_ON		(TOSA_TC6393XB_GPIO_BASE + 11)
-#define TOSA_GPIO_BAT_SW_ON		(TOSA_TC6393XB_GPIO_BASE + 12)
-#define TOSA_GPIO_BAT0_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 14)
-#define TOSA_GPIO_BAT1_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 15)
-
-/*
- * PXA GPIOs
- */
-#define TOSA_GPIO_POWERON		(0)
-#define TOSA_GPIO_RESET			(1)
-#define TOSA_GPIO_AC_IN			(2)
-#define TOSA_GPIO_RECORD_BTN		(3)
-#define TOSA_GPIO_SYNC			(4)	/* Cradle SYNC Button */
-#define TOSA_GPIO_USB_IN		(5)
-#define TOSA_GPIO_JACKET_DETECT		(7)
-#define TOSA_GPIO_nSD_DETECT		(9)
-#define TOSA_GPIO_nSD_INT		(10)
-#define TOSA_GPIO_TC6393XB_CLK		(11)
-#define TOSA_GPIO_BAT1_CRG		(12)
-#define TOSA_GPIO_CF_CD			(13)
-#define TOSA_GPIO_BAT0_CRG		(14)
-#define TOSA_GPIO_TC6393XB_INT		(15)
-#define TOSA_GPIO_BAT0_LOW		(17)
-#define TOSA_GPIO_TC6393XB_RDY		(18)
-#define TOSA_GPIO_ON_RESET		(19)
-#define TOSA_GPIO_EAR_IN		(20)
-#define TOSA_GPIO_CF_IRQ		(21)	/* CF slot0 Ready */
-#define TOSA_GPIO_ON_KEY		(22)
-#define TOSA_GPIO_VGA_LINE		(27)
-#define TOSA_GPIO_TP_INT		(32)	/* Touch Panel pen down interrupt */
-#define TOSA_GPIO_JC_CF_IRQ		(36)	/* CF slot1 Ready */
-#define TOSA_GPIO_BAT_LOCKED		(38)	/* Battery locked */
-#define TOSA_GPIO_IRDA_TX		(47)
-#define TOSA_GPIO_TG_SPI_SCLK		(81)
-#define TOSA_GPIO_TG_SPI_CS		(82)
-#define TOSA_GPIO_TG_SPI_MOSI		(83)
-#define TOSA_GPIO_BAT1_LOW		(84)
-
-#define TOSA_GPIO_HP_IN			GPIO_EAR_IN
-
-#define TOSA_GPIO_MAIN_BAT_LOW		GPIO_BAT0_LOW
-
-#define TOSA_KEY_STROBE_NUM		(11)
-#define TOSA_KEY_SENSE_NUM		(7)
-
-#define TOSA_GPIO_HIGH_STROBE_BIT	(0xfc000000)
-#define TOSA_GPIO_LOW_STROBE_BIT	(0x0000001f)
-#define TOSA_GPIO_ALL_SENSE_BIT		(0x00000fe0)
-#define TOSA_GPIO_ALL_SENSE_RSHIFT	(5)
-#define TOSA_GPIO_STROBE_BIT(a)		GPIO_bit(58+(a))
-#define TOSA_GPIO_SENSE_BIT(a)		GPIO_bit(69+(a))
-#define TOSA_GAFR_HIGH_STROBE_BIT	(0xfff00000)
-#define TOSA_GAFR_LOW_STROBE_BIT	(0x000003ff)
-#define TOSA_GAFR_ALL_SENSE_BIT		(0x00fffc00)
-#define TOSA_GPIO_KEY_SENSE(a) 		(69+(a))
-#define TOSA_GPIO_KEY_STROBE(a)		(58+(a))
-
-/*
- * Interrupts
- */
-#define TOSA_IRQ_GPIO_WAKEUP        	PXA_GPIO_TO_IRQ(TOSA_GPIO_WAKEUP)
-#define TOSA_IRQ_GPIO_AC_IN         	PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN)
-#define TOSA_IRQ_GPIO_RECORD_BTN    	PXA_GPIO_TO_IRQ(TOSA_GPIO_RECORD_BTN)
-#define TOSA_IRQ_GPIO_SYNC          	PXA_GPIO_TO_IRQ(TOSA_GPIO_SYNC)
-#define TOSA_IRQ_GPIO_USB_IN        	PXA_GPIO_TO_IRQ(TOSA_GPIO_USB_IN)
-#define TOSA_IRQ_GPIO_JACKET_DETECT 	PXA_GPIO_TO_IRQ(TOSA_GPIO_JACKET_DETECT)
-#define TOSA_IRQ_GPIO_nSD_INT       	PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_INT)
-#define TOSA_IRQ_GPIO_nSD_DETECT    	PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_DETECT)
-#define TOSA_IRQ_GPIO_BAT1_CRG      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_CRG)
-#define TOSA_IRQ_GPIO_CF_CD         	PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_CD)
-#define TOSA_IRQ_GPIO_BAT0_CRG      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_CRG)
-#define TOSA_IRQ_GPIO_TC6393XB_INT    	PXA_GPIO_TO_IRQ(TOSA_GPIO_TC6393XB_INT)
-#define TOSA_IRQ_GPIO_BAT0_LOW      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_LOW)
-#define TOSA_IRQ_GPIO_EAR_IN        	PXA_GPIO_TO_IRQ(TOSA_GPIO_EAR_IN)
-#define TOSA_IRQ_GPIO_CF_IRQ        	PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_IRQ)
-#define TOSA_IRQ_GPIO_ON_KEY        	PXA_GPIO_TO_IRQ(TOSA_GPIO_ON_KEY)
-#define TOSA_IRQ_GPIO_VGA_LINE      	PXA_GPIO_TO_IRQ(TOSA_GPIO_VGA_LINE)
-#define TOSA_IRQ_GPIO_TP_INT        	PXA_GPIO_TO_IRQ(TOSA_GPIO_TP_INT)
-#define TOSA_IRQ_GPIO_JC_CF_IRQ     	PXA_GPIO_TO_IRQ(TOSA_GPIO_JC_CF_IRQ)
-#define TOSA_IRQ_GPIO_BAT_LOCKED    	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT_LOCKED)
-#define TOSA_IRQ_GPIO_BAT1_LOW      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_LOW)
-#define TOSA_IRQ_GPIO_KEY_SENSE(a)  	PXA_GPIO_TO_IRQ(69+(a))
-
-#define TOSA_IRQ_GPIO_MAIN_BAT_LOW 	PXA_GPIO_TO_IRQ(TOSA_GPIO_MAIN_BAT_LOW)
-
-#define TOSA_KEY_SYNC		KEY_102ND /* ??? */
-
-#ifndef CONFIG_TOSA_USE_EXT_KEYCODES
-#define TOSA_KEY_RECORD		KEY_YEN
-#define TOSA_KEY_ADDRESSBOOK	KEY_KATAKANA
-#define TOSA_KEY_CANCEL		KEY_ESC
-#define TOSA_KEY_CENTER		KEY_HIRAGANA
-#define TOSA_KEY_OK		KEY_HENKAN
-#define TOSA_KEY_CALENDAR	KEY_KATAKANAHIRAGANA
-#define TOSA_KEY_HOMEPAGE	KEY_HANGEUL
-#define TOSA_KEY_LIGHT		KEY_MUHENKAN
-#define TOSA_KEY_MENU		KEY_HANJA
-#define TOSA_KEY_FN		KEY_RIGHTALT
-#define TOSA_KEY_MAIL		KEY_ZENKAKUHANKAKU
-#else
-#define TOSA_KEY_RECORD		KEY_RECORD
-#define TOSA_KEY_ADDRESSBOOK	KEY_ADDRESSBOOK
-#define TOSA_KEY_CANCEL		KEY_CANCEL
-#define TOSA_KEY_CENTER		KEY_SELECT /* ??? */
-#define TOSA_KEY_OK		KEY_OK
-#define TOSA_KEY_CALENDAR	KEY_CALENDAR
-#define TOSA_KEY_HOMEPAGE	KEY_HOMEPAGE
-#define TOSA_KEY_LIGHT		KEY_KBDILLUMTOGGLE
-#define TOSA_KEY_MENU		KEY_MENU
-#define TOSA_KEY_FN		KEY_FN
-#define TOSA_KEY_MAIL		KEY_MAIL
-#endif
-
-#endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
deleted file mode 100644
index 3cddb1428c5e..000000000000
--- a/arch/arm/mach-pxa/include/mach/trizeps4.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/************************************************************************
- * Include file for TRIZEPS4 SoM and ConXS eval-board
- * Copyright (c) Jürgen Schindele
- * 2006
- ************************************************************************/
-
-/*
- * Includes/Defines
- */
-#ifndef _TRIPEPS4_H_
-#define _TRIPEPS4_H_
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/* physical memory regions */
-#define TRIZEPS4_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
-#define TRIZEPS4_DISK_PHYS	(PXA_CS1_PHYS)  /* Disk On Chip region */
-#define TRIZEPS4_ETH_PHYS	(PXA_CS2_PHYS)  /* Ethernet DM9000 region */
-#define TRIZEPS4_PIC_PHYS	(PXA_CS3_PHYS)	/* Logic chip on ConXS-Board */
-#define TRIZEPS4_SDRAM_BASE	0xa0000000      /* SDRAM region */
-
-				/* Logic on ConXS-board CSFR register*/
-#define TRIZEPS4_CFSR_PHYS	(PXA_CS3_PHYS)
-				/* Logic on ConXS-board BOCR register*/
-#define TRIZEPS4_BOCR_PHYS	(PXA_CS3_PHYS+0x02000000)
-				/* Logic on ConXS-board IRCR register*/
-#define TRIZEPS4_IRCR_PHYS	(PXA_CS3_PHYS+0x02400000)
-				/* Logic on ConXS-board UPSR register*/
-#define TRIZEPS4_UPSR_PHYS	(PXA_CS3_PHYS+0x02800000)
-				/* Logic on ConXS-board DICR register*/
-#define TRIZEPS4_DICR_PHYS	(PXA_CS3_PHYS+0x03800000)
-
-/* virtual memory regions */
-#define TRIZEPS4_DISK_VIRT	0xF0000000	/* Disk On Chip region */
-
-#define TRIZEPS4_PIC_VIRT	0xF0100000	/* not used */
-#define TRIZEPS4_CFSR_VIRT	0xF0100000
-#define TRIZEPS4_BOCR_VIRT	0xF0200000
-#define TRIZEPS4_DICR_VIRT	0xF0300000
-#define TRIZEPS4_IRCR_VIRT	0xF0400000
-#define TRIZEPS4_UPSR_VIRT	0xF0500000
-
-/* size of flash */
-#define TRIZEPS4_FLASH_SIZE	0x02000000	/* Flash size 32 MB */
-
-/* Ethernet Controller Davicom DM9000 */
-#define GPIO_DM9000		101
-#define TRIZEPS4_ETH_IRQ	PXA_GPIO_TO_IRQ(GPIO_DM9000)
-
-/* UCB1400 audio / TS-controller */
-#define GPIO_UCB1400		1
-#define TRIZEPS4_UCB1400_IRQ	PXA_GPIO_TO_IRQ(GPIO_UCB1400)
-
-/* PCMCIA socket Compact Flash */
-#define GPIO_PCD		11		/* PCMCIA Card Detect */
-#define TRIZEPS4_CD_IRQ		PXA_GPIO_TO_IRQ(GPIO_PCD)
-#define GPIO_PRDY		13		/* READY / nINT */
-#define TRIZEPS4_READY_NINT	PXA_GPIO_TO_IRQ(GPIO_PRDY)
-
-/* MMC socket */
-#define GPIO_MMC_DET		12
-#define TRIZEPS4_MMC_IRQ	PXA_GPIO_TO_IRQ(GPIO_MMC_DET)
-
-/* DOC NAND chip */
-#define GPIO_DOC_LOCK           94
-#define GPIO_DOC_IRQ            93
-#define TRIZEPS4_DOC_IRQ        PXA_GPIO_TO_IRQ(GPIO_DOC_IRQ)
-
-/* SPI interface */
-#define GPIO_SPI                53
-#define TRIZEPS4_SPI_IRQ        PXA_GPIO_TO_IRQ(GPIO_SPI)
-
-/* LEDS using tx2 / rx2 */
-#define GPIO_SYS_BUSY_LED	46
-#define GPIO_HEARTBEAT_LED	47
-
-/* Off-module PIC on ConXS board */
-#define GPIO_PIC		0
-#define TRIZEPS4_PIC_IRQ	PXA_GPIO_TO_IRQ(GPIO_PIC)
-
-#ifdef CONFIG_MACH_TRIZEPS_CONXS
-/* for CONXS base board define these registers */
-#define CFSR_P2V(x)	((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
-#define CFSR_V2P(x)	((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
-
-#define BCR_P2V(x)	((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
-#define BCR_V2P(x)	((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
-
-#define DCR_P2V(x)	((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
-#define DCR_V2P(x)	((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
-
-#define IRCR_P2V(x)	((x) - TRIZEPS4_IRCR_PHYS + TRIZEPS4_IRCR_VIRT)
-#define IRCR_V2P(x)	((x) - TRIZEPS4_IRCR_VIRT + TRIZEPS4_IRCR_PHYS)
-
-#ifndef __ASSEMBLY__
-static inline unsigned short CFSR_readw(void)
-{
-	/* [Compact Flash Status Register] is read only */
-	return *((unsigned short *)CFSR_P2V(0x0C000000));
-}
-static inline void BCR_writew(unsigned short value)
-{
-	/* [Board Control Regsiter] is write only */
-	*((unsigned short *)BCR_P2V(0x0E000000)) = value;
-}
-static inline void DCR_writew(unsigned short value)
-{
-	/* [Display Control Register] is write only */
-	*((unsigned short *)DCR_P2V(0x0E000000)) = value;
-}
-static inline void IRCR_writew(unsigned short value)
-{
-	/* [InfraRed data Control Register] is write only */
-	*((unsigned short *)IRCR_P2V(0x0E000000)) = value;
-}
-#else
-#define ConXS_CFSR		CFSR_P2V(0x0C000000)
-#define ConXS_BCR		BCR_P2V(0x0E000000)
-#define ConXS_DCR		DCR_P2V(0x0F800000)
-#define ConXS_IRCR		IRCR_P2V(0x0F800000)
-#endif
-#else
-/* for whatever baseboard define function registers */
-static inline unsigned short CFSR_readw(void)
-{
-	return 0;
-}
-static inline void BCR_writew(unsigned short value)
-{
-	;
-}
-static inline void DCR_writew(unsigned short value)
-{
-	;
-}
-static inline void IRCR_writew(unsigned short value)
-{
-	;
-}
-#endif	/* CONFIG_MACH_TRIZEPS_CONXS */
-
-#define ConXS_CFSR_BVD_MASK	0x0003
-#define ConXS_CFSR_BVD1		(1 << 0)
-#define ConXS_CFSR_BVD2		(1 << 1)
-#define ConXS_CFSR_VS_MASK	0x000C
-#define ConXS_CFSR_VS1		(1 << 2)
-#define ConXS_CFSR_VS2		(1 << 3)
-#define ConXS_CFSR_VS_5V	(0x3 << 2)
-#define ConXS_CFSR_VS_3V3	0x0
-
-#define ConXS_BCR_S0_POW_EN0	(1 << 0)
-#define ConXS_BCR_S0_POW_EN1	(1 << 1)
-#define ConXS_BCR_L_DISP	(1 << 4)
-#define ConXS_BCR_CF_BUF_EN	(1 << 5)
-#define ConXS_BCR_CF_RESET	(1 << 7)
-#define ConXS_BCR_S0_VCC_3V3	0x1
-#define ConXS_BCR_S0_VCC_5V0	0x2
-#define ConXS_BCR_S0_VPP_12V	0x4
-#define ConXS_BCR_S0_VPP_3V3	0x8
-
-#define ConXS_IRCR_MODE		(1 << 0)
-#define ConXS_IRCR_SD		(1 << 1)
-
-#endif /* _TRIPEPS4_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
deleted file mode 100644
index c36306064eee..000000000000
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-pxa/include/mach/uncompress.h
- *
- * Author:	Nicolas Pitre
- * Copyright:	(C) 2001 MontaVista Software Inc.
- */
-
-#include <linux/serial_reg.h>
-#include <asm/mach-types.h>
-
-#define FFUART_BASE	(0x40100000)
-#define BTUART_BASE	(0x40200000)
-#define STUART_BASE	(0x40700000)
-
-unsigned long uart_base;
-unsigned int uart_shift;
-unsigned int uart_is_pxa;
-
-static inline unsigned char uart_read(int offset)
-{
-	return *(volatile unsigned char *)(uart_base + (offset << uart_shift));
-}
-
-static inline void uart_write(unsigned char val, int offset)
-{
-	*(volatile unsigned char *)(uart_base + (offset << uart_shift)) = val;
-}
-
-static inline int uart_is_enabled(void)
-{
-	/* assume enabled by default for non-PXA uarts */
-	return uart_is_pxa ? uart_read(UART_IER) & UART_IER_UUE : 1;
-}
-
-static inline void putc(char c)
-{
-	if (!uart_is_enabled())
-		return;
-
-	while (!(uart_read(UART_LSR) & UART_LSR_THRE))
-		barrier();
-
-	uart_write(c, UART_TX);
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-	/* initialize to default */
-	uart_base = FFUART_BASE;
-	uart_shift = 2;
-	uart_is_pxa = 1;
-
-	if (machine_is_littleton() || machine_is_intelmote2()
-	    || machine_is_csb726() || machine_is_stargate2()
-	    || machine_is_cm_x300() || machine_is_balloon3())
-		uart_base = STUART_BASE;
-
-	if (machine_is_arcom_zeus()) {
-		uart_base = 0x10000000;	/* nCS4 */
-		uart_shift = 1;
-		uart_is_pxa = 0;
-	}
-}
diff --git a/arch/arm/mach-pxa/include/mach/vpac270.h b/arch/arm/mach-pxa/include/mach/vpac270.h
deleted file mode 100644
index 0cd094d8c553..000000000000
--- a/arch/arm/mach-pxa/include/mach/vpac270.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Voipac PXA270
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- */
-
-#ifndef _INCLUDE_VPAC270_H_
-#define _INCLUDE_VPAC270_H_
-
-#define	GPIO1_VPAC270_USER_BTN		1
-
-#define	GPIO15_VPAC270_LED_ORANGE	15
-
-#define	GPIO81_VPAC270_BKL_ON		81
-#define	GPIO83_VPAC270_NL_ON		83
-
-#define	GPIO52_VPAC270_SD_READONLY	52
-#define	GPIO53_VPAC270_SD_DETECT_N	53
-
-#define	GPIO84_VPAC270_PCMCIA_CD	84
-#define	GPIO35_VPAC270_PCMCIA_RDY	35
-#define	GPIO107_VPAC270_PCMCIA_PPEN	107
-#define	GPIO11_VPAC270_PCMCIA_RESET	11
-#define	GPIO17_VPAC270_CF_CD		17
-#define	GPIO12_VPAC270_CF_RDY		12
-#define	GPIO16_VPAC270_CF_RESET		16
-
-#define	GPIO41_VPAC270_UDC_DETECT	41
-
-#define	GPIO114_VPAC270_ETH_IRQ		114
-
-#define	GPIO36_VPAC270_IDE_IRQ		36
-
-#define	GPIO113_VPAC270_TS_IRQ		113
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h
deleted file mode 100644
index a78b2e28b1db..000000000000
--- a/arch/arm/mach-pxa/include/mach/z2.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-pxa/include/mach/z2.h
- *
- *  Author: Ken McGuire
- *  Created: Feb 6, 2009
- */
-
-#ifndef ASM_ARCH_ZIPIT2_H
-#define ASM_ARCH_ZIPIT2_H
-
-/* LEDs */
-#define	GPIO10_ZIPITZ2_LED_WIFI		10
-#define	GPIO85_ZIPITZ2_LED_CHARGED	85
-#define	GPIO83_ZIPITZ2_LED_CHARGING	83
-
-/* SD/MMC */
-#define	GPIO96_ZIPITZ2_SD_DETECT	96
-
-/* GPIO Buttons */
-#define	GPIO1_ZIPITZ2_POWER_BUTTON	1
-#define	GPIO98_ZIPITZ2_LID_BUTTON	98
-
-/* Libertas GSPI8686 WiFi */
-#define	GPIO14_ZIPITZ2_WIFI_POWER	14
-#define	GPIO24_ZIPITZ2_WIFI_CS		24
-#define	GPIO36_ZIPITZ2_WIFI_IRQ		36
-
-/* LCD */
-#define	GPIO19_ZIPITZ2_LCD_RESET	19
-#define	GPIO88_ZIPITZ2_LCD_CS		88
-
-/* MISC GPIOs */
-#define	GPIO0_ZIPITZ2_AC_DETECT		0
-#define GPIO37_ZIPITZ2_HEADSET_DETECT	37
-
-#endif
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 74efc3ab595f..a9ef71008147 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -17,13 +17,14 @@
 #include <linux/irq.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include <asm/exception.h>
 
-#include <mach/hardware.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include "generic.h"
+#include "pxa-regs.h"
 
 #define ICIP			(0x000)
 #define ICMR			(0x004)
@@ -256,8 +257,7 @@ void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int))
 	}
 	pxa_irq_base = io_p2v(res.start);
 
-	if (of_find_property(node, "marvell,intc-priority", NULL))
-		cpu_has_ipr = 1;
+	cpu_has_ipr = of_property_read_bool(node, "marvell,intc-priority");
 
 	ret = irq_alloc_descs(-1, 0, pxa_internal_irq_nr, 0);
 	if (ret < 0) {
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/irqs.h
index 22bf536a462d..22bf536a462d 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/irqs.h
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
deleted file mode 100644
index 793f61375ee8..000000000000
--- a/arch/arm/mach-pxa/littleton.c
+++ /dev/null
@@ -1,455 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/littleton.c
- *
- *  Support for the Marvell Littleton Development Platform.
- *
- *  Author:	Jason Chagas (largely modified code)
- *  Created:	Nov 20, 2006
- *  Copyright:	(C) Copyright 2006 Marvell International Ltd.
- *
- *  2007-11-22  modified to align with latest kernel
- *              eric miao <eric.miao@marvell.com>
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/smc91x.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/mfd/da903x.h>
-#include <linux/platform_data/max732x.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "pxa300.h"
-#include "devices.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "littleton.h"
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-
-#include "generic.h"
-
-/* Littleton MFP configurations */
-static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-
-	/* SSP2 */
-	GPIO25_SSP2_SCLK,
-	GPIO27_SSP2_TXD,
-	GPIO17_GPIO,	/* SFRM as chip-select */
-
-	/* Debug Ethernet */
-	GPIO90_GPIO,
-
-	/* Keypad */
-	GPIO107_KP_DKIN_0,
-	GPIO108_KP_DKIN_1,
-	GPIO115_KP_MKIN_0,
-	GPIO116_KP_MKIN_1,
-	GPIO117_KP_MKIN_2,
-	GPIO118_KP_MKIN_3,
-	GPIO119_KP_MKIN_4,
-	GPIO120_KP_MKIN_5,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-
-	/* MMC1 */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-	GPIO15_GPIO, /* card detect */
-
-	/* UART3 */
-	GPIO107_UART3_CTS,
-	GPIO108_UART3_RTS,
-	GPIO109_UART3_TXD,
-	GPIO110_UART3_RXD,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (LITTLETON_ETH_PHYS + 0x300),
-		.end	= (LITTLETON_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	}
-};
-
-static struct smc91x_platdata littleton_smc91x_info = {
-	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
-		  SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &littleton_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
-	[0] = {
-		/* VGA */
-		.pixclock	= 38250,
-		.xres		= 480,
-		.yres		= 640,
-		.bpp		= 16,
-		.hsync_len	= 8,
-		.left_margin	= 8,
-		.right_margin	= 24,
-		.vsync_len	= 2,
-		.upper_margin	= 2,
-		.lower_margin	= 4,
-		.sync		= 0,
-	},
-	[1] = {
-		/* QVGA */
-		.pixclock	= 153000,
-		.xres		= 240,
-		.yres		= 320,
-		.bpp		= 16,
-		.hsync_len	= 8,
-		.left_margin	= 8,
-		.right_margin	= 88,
-		.vsync_len	= 2,
-		.upper_margin	= 2,
-		.lower_margin	= 2,
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info littleton_lcd_info = {
-	.modes			= tpo_tdo24mtea1_modes,
-	.num_modes		= 2,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP,
-};
-
-static void __init littleton_init_lcd(void)
-{
-	pxa_set_fb_info(NULL, &littleton_lcd_info);
-}
-#else
-static inline void littleton_init_lcd(void) {};
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_controller littleton_spi_info = {
-	.num_chipselect		= 1,
-};
-
-static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
-	.rx_threshold	= 1,
-	.tx_threshold	= 1,
-	.gpio_cs	= LITTLETON_GPIO_LCD_CS,
-};
-
-static struct spi_board_info littleton_spi_devices[] __initdata = {
-	{
-		.modalias	= "tdo24m",
-		.max_speed_hz	= 1000000,
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.controller_data= &littleton_tdo24m_chip,
-	},
-};
-
-static void __init littleton_init_spi(void)
-{
-	pxa2xx_set_spi_info(2, &littleton_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
-}
-#else
-static inline void littleton_init_spi(void) {}
-#endif
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int littleton_matrix_key_map[] = {
-	/* KEY(row, col, key_code) */
-	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
-	KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7),
-	KEY(1, 2, KEY_8), KEY(2, 2, KEY_9),
-
-	KEY(0, 3, KEY_KPASTERISK), 	/* * */
-	KEY(2, 3, KEY_KPDOT), 		/* # */
-
-	KEY(5, 4, KEY_ENTER),
-
-	KEY(5, 0, KEY_UP),
-	KEY(5, 1, KEY_DOWN),
-	KEY(5, 2, KEY_LEFT),
-	KEY(5, 3, KEY_RIGHT),
-	KEY(3, 2, KEY_HOME),
-	KEY(4, 1, KEY_END),
-	KEY(3, 3, KEY_BACK),
-
-	KEY(4, 0, KEY_SEND),
-	KEY(4, 2, KEY_VOLUMEUP),
-	KEY(4, 3, KEY_VOLUMEDOWN),
-
-	KEY(3, 0, KEY_F22),	/* soft1 */
-	KEY(3, 1, KEY_F23),	/* soft2 */
-};
-
-static struct matrix_keymap_data littleton_matrix_keymap_data = {
-	.keymap			= littleton_matrix_key_map,
-	.keymap_size		= ARRAY_SIZE(littleton_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data littleton_keypad_info = {
-	.matrix_key_rows	= 6,
-	.matrix_key_cols	= 5,
-	.matrix_keymap_data	= &littleton_matrix_keymap_data,
-
-	.enable_rotary0		= 1,
-	.rotary0_up_key		= KEY_UP,
-	.rotary0_down_key	= KEY_DOWN,
-
-	.debounce_interval	= 30,
-};
-static void __init littleton_init_keypad(void)
-{
-	pxa_set_keypad_info(&littleton_keypad_info);
-}
-#else
-static inline void littleton_init_keypad(void) {}
-#endif
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data littleton_mci_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table littleton_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on MFP (gpio-pxa) GPIO 15 */
-		GPIO_LOOKUP("gpio-pxa", MFP_PIN_GPIO15,
-			    "cd", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init littleton_init_mmc(void)
-{
-	gpiod_add_lookup_table(&littleton_mci_gpio_table);
-	pxa_set_mci_info(&littleton_mci_platform_data);
-}
-#else
-static inline void littleton_init_mmc(void) {}
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-static struct mtd_partition littleton_nand_partitions[] = {
-	[0] = {
-		.name        = "Bootloader",
-		.offset      = 0,
-		.size        = 0x060000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[1] = {
-		.name        = "Kernel",
-		.offset      = 0x060000,
-		.size        = 0x200000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[2] = {
-		.name        = "Filesystem",
-		.offset      = 0x0260000,
-		.size        = 0x3000000,     /* 48M - rootfs */
-	},
-	[3] = {
-		.name        = "MassStorage",
-		.offset      = 0x3260000,
-		.size        = 0x3d40000,
-	},
-	[4] = {
-		.name        = "BBT",
-		.offset      = 0x6FA0000,
-		.size        = 0x80000,
-		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
-	},
-	/* NOTE: we reserve some blocks at the end of the NAND flash for
-	 * bad block management, and the max number of relocation blocks
-	 * differs on different platforms. Please take care with it when
-	 * defining the partition table.
-	 */
-};
-
-static struct pxa3xx_nand_platform_data littleton_nand_info = {
-	.parts		= littleton_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(littleton_nand_partitions),
-};
-
-static void __init littleton_init_nand(void)
-{
-	pxa3xx_set_nand_info(&littleton_nand_info);
-}
-#else
-static inline void littleton_init_nand(void) {}
-#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
-
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct led_info littleton_da9034_leds[] = {
-	[0] = {
-		.name	= "littleton:keypad1",
-		.flags	= DA9034_LED_RAMP,
-	},
-	[1] = {
-		.name	= "littleton:keypad2",
-		.flags	= DA9034_LED_RAMP,
-	},
-	[2] = {
-		.name	= "littleton:vibra",
-		.flags	= 0,
-	},
-};
-
-static struct da9034_touch_pdata littleton_da9034_touch = {
-	.x_inverted     = 1,
-	.interval_ms    = 20,
-};
-
-static struct da903x_subdev_info littleton_da9034_subdevs[] = {
-	{
-		.name		= "da903x-led",
-		.id		= DA9034_ID_LED_1,
-		.platform_data	= &littleton_da9034_leds[0],
-	}, {
-		.name		= "da903x-led",
-		.id		= DA9034_ID_LED_2,
-		.platform_data	= &littleton_da9034_leds[1],
-	}, {
-		.name		= "da903x-led",
-		.id		= DA9034_ID_VIBRA,
-		.platform_data	= &littleton_da9034_leds[2],
-	}, {
-		.name		= "da903x-backlight",
-		.id		= DA9034_ID_WLED,
-	}, {
-		.name		= "da9034-touch",
-		.id		= DA9034_ID_TOUCH,
-		.platform_data	= &littleton_da9034_touch,
-	},
-};
-
-static struct da903x_platform_data littleton_da9034_info = {
-	.num_subdevs	= ARRAY_SIZE(littleton_da9034_subdevs),
-	.subdevs	= littleton_da9034_subdevs,
-};
-
-static struct max732x_platform_data littleton_max7320_info = {
-	.gpio_base	= EXT0_GPIO_BASE,
-};
-
-static struct i2c_board_info littleton_i2c_info[] = {
-	[0] = {
-		.type		= "da9034",
-		.addr		= 0x34,
-		.platform_data	= &littleton_da9034_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO18)),
-	},
-	[1] = {
-		.type		= "max7320",
-		.addr		= 0x50,
-		.platform_data	= &littleton_max7320_info,
-	},
-};
-
-static void __init littleton_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(littleton_i2c_info));
-}
-#else
-static inline void littleton_init_i2c(void) {}
-#endif /* CONFIG_I2C_PXA || CONFIG_I2C_PXA_MODULE */
-
-static void __init littleton_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	/*
-	 * Note: we depend bootloader set the correct
-	 * value to MSC register for SMC91x.
-	 */
-	platform_device_register(&smc91x_device);
-
-	littleton_init_spi();
-	littleton_init_i2c();
-	littleton_init_mmc();
-	littleton_init_lcd();
-	littleton_init_keypad();
-	littleton_init_nand();
-}
-
-MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= LITTLETON_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= littleton_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/littleton.h b/arch/arm/mach-pxa/littleton.h
deleted file mode 100644
index a0a8d2bf9d71..000000000000
--- a/arch/arm/mach-pxa/littleton.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_LITTLETON_H
-#define __ASM_ARCH_LITTLETON_H
-
-#define LITTLETON_ETH_PHYS	0x30000000
-
-#define LITTLETON_GPIO_LCD_CS	(17)
-
-#define EXT0_GPIO_BASE	(PXA_NR_BUILTIN_GPIO)
-#define EXT0_GPIO(x)	(EXT0_GPIO_BASE + (x))
-
-#define LITTLETON_NR_IRQS	(IRQ_BOARD_START + 8)
-
-#endif /* __ASM_ARCH_LITTLETON_H */
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
deleted file mode 100644
index 6fc40bc06910..000000000000
--- a/arch/arm/mach-pxa/lpd270.c
+++ /dev/null
@@ -1,518 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/lpd270.c
- *
- * Support for the LogicPD PXA270 Card Engine.
- * Derived from the mainstone code, which carries these notices:
- *
- * Author:	Nicolas Pitre
- * Created:	Nov 05, 2002
- * Copyright:	MontaVista Software Inc.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/smc91x.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include "pxa27x.h"
-#include "lpd270.h"
-#include <mach/audio.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long lpd270_pin_config[] __initdata = {
-	/* Chip Selects */
-	GPIO15_nCS_1,	/* Mainboard Flash */
-	GPIO78_nCS_2,	/* CPLD + Ethernet */
-
-	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
-	GPIO16_PWM0_OUT,	/* Backlight */
-
-	/* USB Host */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO45_AC97_SYSCLK,
-
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-};
-
-static unsigned int lpd270_irq_enabled;
-
-static void lpd270_mask_irq(struct irq_data *d)
-{
-	int lpd270_irq = d->irq - LPD270_IRQ(0);
-
-	__raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
-
-	lpd270_irq_enabled &= ~(1 << lpd270_irq);
-	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
-}
-
-static void lpd270_unmask_irq(struct irq_data *d)
-{
-	int lpd270_irq = d->irq - LPD270_IRQ(0);
-
-	lpd270_irq_enabled |= 1 << lpd270_irq;
-	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
-}
-
-static struct irq_chip lpd270_irq_chip = {
-	.name		= "CPLD",
-	.irq_ack	= lpd270_mask_irq,
-	.irq_mask	= lpd270_mask_irq,
-	.irq_unmask	= lpd270_unmask_irq,
-};
-
-static void lpd270_irq_handler(struct irq_desc *desc)
-{
-	unsigned int irq;
-	unsigned long pending;
-
-	pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
-	do {
-		/* clear useless edge notification */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = LPD270_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-
-			pending = __raw_readw(LPD270_INT_STATUS) &
-						lpd270_irq_enabled;
-		}
-	} while (pending);
-}
-
-static void __init lpd270_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-
-	__raw_writew(0, LPD270_INT_MASK);
-	__raw_writew(0, LPD270_INT_STATUS);
-
-	/* setup extra LogicPD PXA270 irqs */
-	for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
-		irq_set_chip_and_handler(irq, &lpd270_irq_chip,
-					 handle_level_irq);
-		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-
-#ifdef CONFIG_PM
-static void lpd270_irq_resume(void)
-{
-	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
-}
-
-static struct syscore_ops lpd270_irq_syscore_ops = {
-	.resume = lpd270_irq_resume,
-};
-
-static int __init lpd270_irq_device_init(void)
-{
-	if (machine_is_logicpd_pxa270()) {
-		register_syscore_ops(&lpd270_irq_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(lpd270_irq_device_init);
-#endif
-
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= LPD270_ETH_PHYS,
-		.end	= (LPD270_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LPD270_ETHERNET_IRQ,
-		.end	= LPD270_ETHERNET_IRQ,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev.platform_data = &smc91x_platdata,
-};
-
-static struct resource lpd270_flash_resources[] = {
-	[0] = {
-		.start	= PXA_CS0_PHYS,
-		.end	= PXA_CS0_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_CS1_PHYS,
-		.end	= PXA_CS1_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition lpd270_flash0_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	}, {
-		.name =		"Kernel",
-		.size =		0x00400000,
-		.offset =	0x00040000,
-	}, {
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00440000
-	},
-};
-
-static struct flash_platform_data lpd270_flash_data[2] = {
-	{
-		.name		= "processor-flash",
-		.map_name	= "cfi_probe",
-		.parts		= lpd270_flash0_partitions,
-		.nr_parts	= ARRAY_SIZE(lpd270_flash0_partitions),
-	}, {
-		.name		= "mainboard-flash",
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	}
-};
-
-static struct platform_device lpd270_flash_device[2] = {
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 0,
-		.dev = {
-			.platform_data	= &lpd270_flash_data[0],
-		},
-		.resource	= &lpd270_flash_resources[0],
-		.num_resources	= 1,
-	}, {
-		.name		= "pxa2xx-flash",
-		.id		= 1,
-		.dev = {
-			.platform_data	= &lpd270_flash_data[1],
-		},
-		.resource	= &lpd270_flash_resources[1],
-		.num_resources	= 1,
-	},
-};
-
-static struct pwm_lookup lpd270_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data lpd270_backlight_data = {
-	.max_brightness	= 1,
-	.dft_brightness	= 1,
-};
-
-static struct platform_device lpd270_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &pxa27x_device_pwm0.dev,
-		.platform_data = &lpd270_backlight_data,
-	},
-};
-
-/* 5.7" TFT QVGA (LoLo display number 1) */
-static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
-	.pixclock		= 150000,
-	.xres			= 320,
-	.yres			= 240,
-	.bpp			= 16,
-	.hsync_len		= 0x14,
-	.left_margin		= 0x28,
-	.right_margin		= 0x0a,
-	.vsync_len		= 0x02,
-	.upper_margin		= 0x08,
-	.lower_margin		= 0x14,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq057q3dc02 = {
-	.modes			= &sharp_lq057q3dc02_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 12.1" TFT SVGA (LoLo display number 2) */
-static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
-	.pixclock		= 50000,
-	.xres			= 800,
-	.yres			= 600,
-	.bpp			= 16,
-	.hsync_len		= 0x05,
-	.left_margin		= 0x52,
-	.right_margin		= 0x05,
-	.vsync_len		= 0x04,
-	.upper_margin		= 0x14,
-	.lower_margin		= 0x0a,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq121s1dg31 = {
-	.modes			= &sharp_lq121s1dg31_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 3.6" TFT QVGA (LoLo display number 3) */
-static struct pxafb_mode_info sharp_lq036q1da01_mode = {
-	.pixclock		= 150000,
-	.xres			= 320,
-	.yres			= 240,
-	.bpp			= 16,
-	.hsync_len		= 0x0e,
-	.left_margin		= 0x04,
-	.right_margin		= 0x0a,
-	.vsync_len		= 0x03,
-	.upper_margin		= 0x03,
-	.lower_margin		= 0x03,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq036q1da01 = {
-	.modes			= &sharp_lq036q1da01_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 6.4" TFT VGA (LoLo display number 5) */
-static struct pxafb_mode_info sharp_lq64d343_mode = {
-	.pixclock		= 25000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 0x31,
-	.left_margin		= 0x89,
-	.right_margin		= 0x19,
-	.vsync_len		= 0x12,
-	.upper_margin		= 0x22,
-	.lower_margin		= 0x00,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq64d343 = {
-	.modes			= &sharp_lq64d343_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 10.4" TFT VGA (LoLo display number 7) */
-static struct pxafb_mode_info sharp_lq10d368_mode = {
-	.pixclock		= 25000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 0x31,
-	.left_margin		= 0x89,
-	.right_margin		= 0x19,
-	.vsync_len		= 0x12,
-	.upper_margin		= 0x22,
-	.lower_margin		= 0x00,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq10d368 = {
-	.modes			= &sharp_lq10d368_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 3.5" TFT QVGA (LoLo display number 8) */
-static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
-	.pixclock		= 150000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 0x0e,
-	.left_margin		= 0x0a,
-	.right_margin		= 0x0a,
-	.vsync_len		= 0x03,
-	.upper_margin		= 0x05,
-	.lower_margin		= 0x14,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq035q7db02_20 = {
-	.modes			= &sharp_lq035q7db02_20_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-static struct pxafb_mach_info *lpd270_lcd_to_use;
-
-static int __init lpd270_set_lcd(char *str)
-{
-	if (!strncasecmp(str, "lq057q3dc02", 11)) {
-		lpd270_lcd_to_use = &sharp_lq057q3dc02;
-	} else if (!strncasecmp(str, "lq121s1dg31", 11)) {
-		lpd270_lcd_to_use = &sharp_lq121s1dg31;
-	} else if (!strncasecmp(str, "lq036q1da01", 11)) {
-		lpd270_lcd_to_use = &sharp_lq036q1da01;
-	} else if (!strncasecmp(str, "lq64d343", 8)) {
-		lpd270_lcd_to_use = &sharp_lq64d343;
-	} else if (!strncasecmp(str, "lq10d368", 8)) {
-		lpd270_lcd_to_use = &sharp_lq10d368;
-	} else if (!strncasecmp(str, "lq035q7db02-20", 14)) {
-		lpd270_lcd_to_use = &sharp_lq035q7db02_20;
-	} else {
-		printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
-	}
-
-	return 1;
-}
-
-__setup("lcd=", lpd270_set_lcd);
-
-static struct platform_device *platform_devices[] __initdata = {
-	&smc91x_device,
-	&lpd270_backlight_device,
-	&lpd270_flash_device[0],
-	&lpd270_flash_device[1],
-};
-
-static struct pxaohci_platform_data lpd270_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init lpd270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
-	lpd270_flash_data[1].width = 4;
-
-	/*
-	 * System bus arbiter setting:
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	pwm_add_table(lpd270_pwm_lookup, ARRAY_SIZE(lpd270_pwm_lookup));
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-	pxa_set_ac97_info(NULL);
-
-	if (lpd270_lcd_to_use != NULL)
-		pxa_set_fb_info(NULL, lpd270_lcd_to_use);
-
-	pxa_set_ohci_info(&lpd270_ohci_platform_data);
-}
-
-
-static struct map_desc lpd270_io_desc[] __initdata = {
-	{
-		.virtual	= (unsigned long)LPD270_CPLD_VIRT,
-		.pfn		= __phys_to_pfn(LPD270_CPLD_PHYS),
-		.length		= LPD270_CPLD_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init lpd270_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
-
-	/* for use I SRAM as framebuffer.  */
-	PSLR |= 0x00000F04;
-	PCFR  = 0x00000066;
-}
-
-MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
-	/* Maintainer: Peter Barada */
-	.atag_offset	= 0x100,
-	.map_io		= lpd270_map_io,
-	.nr_irqs	= LPD270_NR_IRQS,
-	.init_irq	= lpd270_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= lpd270_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/lpd270.h b/arch/arm/mach-pxa/lpd270.h
deleted file mode 100644
index 4b096fb9d61f..000000000000
--- a/arch/arm/mach-pxa/lpd270.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-pxa/include/mach/lpd270.h
- *
- * Author:	Lennert Buytenhek
- * Created:	Feb 10, 2006
- */
-
-#ifndef __ASM_ARCH_LPD270_H
-#define __ASM_ARCH_LPD270_H
-
-#define LPD270_CPLD_PHYS	PXA_CS2_PHYS
-#define LPD270_CPLD_VIRT	IOMEM(0xf0000000)
-#define LPD270_CPLD_SIZE	0x00100000
-
-#define LPD270_ETH_PHYS		(PXA_CS2_PHYS + 0x01000000)
-
-/* CPLD registers  */
-#define LPD270_CPLD_REG(x)	(LPD270_CPLD_VIRT + (x))
-#define LPD270_CONTROL		LPD270_CPLD_REG(0x00)
-#define LPD270_PERIPHERAL0	LPD270_CPLD_REG(0x04)
-#define LPD270_PERIPHERAL1	LPD270_CPLD_REG(0x08)
-#define LPD270_CPLD_REVISION	LPD270_CPLD_REG(0x14)
-#define LPD270_EEPROM_SPI_ITF	LPD270_CPLD_REG(0x20)
-#define LPD270_MODE_PINS	LPD270_CPLD_REG(0x24)
-#define LPD270_EGPIO		LPD270_CPLD_REG(0x30)
-#define LPD270_INT_MASK		LPD270_CPLD_REG(0x40)
-#define LPD270_INT_STATUS	LPD270_CPLD_REG(0x50)
-
-#define LPD270_INT_AC97		(1 << 4)  /* AC'97 CODEC IRQ */
-#define LPD270_INT_ETHERNET	(1 << 3)  /* Ethernet controller IRQ */
-#define LPD270_INT_USBC		(1 << 2)  /* USB client cable detection IRQ */
-
-#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LPD270_USBC_IRQ		LPD270_IRQ(2)
-#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
-#define LPD270_AC97_IRQ		LPD270_IRQ(4)
-#define LPD270_NR_IRQS		(IRQ_BOARD_START + 5)
-
-#endif
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
deleted file mode 100644
index 742d18a1f7dc..000000000000
--- a/arch/arm/mach-pxa/lubbock.c
+++ /dev/null
@@ -1,637 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/lubbock.c
- *
- *  Support for the Intel DBPXA250 Development Platform.
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- */
-#include <linux/clkdev.h>
-#include <linux/gpio.h>
-#include <linux/gpio/gpio-reg.h>
-#include <linux/gpio/machine.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/major.h>
-#include <linux/fb.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/smc91x.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/pxa2xx_spi.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <asm/hardware/sa1111.h>
-
-#include "pxa25x.h"
-#include <mach/audio.h>
-#include <mach/lubbock.h>
-#include "udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "pm.h"
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long lubbock_pin_config[] __initdata = {
-	GPIO15_nCS_1,	/* CS1 - Flash */
-	GPIO78_nCS_2,	/* CS2 - Baseboard FGPA */
-	GPIO79_nCS_3,	/* CS3 - SMC ethernet */
-	GPIO80_nCS_4,	/* CS4 - SA1111 */
-
-	/* SSP data pins */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* LCD - 16bpp DSTN */
-	GPIOxx_LCD_DSTN_16BPP,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* SA1111 chip */
-	GPIO11_3_6MHz,
-
-	/* wakeup */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
-
-void lubbock_set_hexled(uint32_t value)
-{
-	LUB_HEXLED = value;
-}
-
-static struct gpio_chip *lubbock_misc_wr_gc;
-
-static void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
-{
-	unsigned long m = mask, v = set;
-	lubbock_misc_wr_gc->set_multiple(lubbock_misc_wr_gc, &m, &v);
-}
-
-static int lubbock_udc_is_connected(void)
-{
-	return (LUB_MISC_RD & (1 << 9)) == 0;
-}
-
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	.udc_is_connected	= lubbock_udc_is_connected,
-	// no D+ pullup; lubbock can't connect/disconnect in software
-};
-
-/* GPIOs for SA1111 PCMCIA */
-static struct gpiod_lookup_table sa1111_pcmcia_gpio_table = {
-	.dev_id = "1800",
-	.table = {
-		{ "sa1111", 0, "a0vpp", GPIO_ACTIVE_HIGH },
-		{ "sa1111", 1, "a1vpp", GPIO_ACTIVE_HIGH },
-		{ "sa1111", 2, "a0vcc", GPIO_ACTIVE_HIGH },
-		{ "sa1111", 3, "a1vcc", GPIO_ACTIVE_HIGH },
-		{ "lubbock", 14, "b0vcc", GPIO_ACTIVE_HIGH },
-		{ "lubbock", 15, "b1vcc", GPIO_ACTIVE_HIGH },
-		{ },
-	},
-};
-
-static void lubbock_init_pcmcia(void)
-{
-	struct clk *clk;
-
-	gpiod_add_lookup_table(&sa1111_pcmcia_gpio_table);
-
-	/* Add an alias for the SA1111 PCMCIA clock */
-	clk = clk_get_sys("pxa2xx-pcmcia", NULL);
-	if (!IS_ERR(clk)) {
-		clkdev_create(clk, NULL, "1800");
-		clk_put(clk);
-	}
-}
-
-static struct resource sa1111_resources[] = {
-	[0] = {
-		.start	= 0x10000000,
-		.end	= 0x10001fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LUBBOCK_SA1111_IRQ,
-		.end	= LUBBOCK_SA1111_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sa1111_platform_data sa1111_info = {
-	.irq_base	= LUBBOCK_SA1111_IRQ_BASE,
-	.disable_devs	= SA1111_DEVID_SAC,
-};
-
-static struct platform_device sa1111_device = {
-	.name		= "sa1111",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sa1111_resources),
-	.resource	= sa1111_resources,
-	.dev		= {
-		.platform_data	= &sa1111_info,
-	},
-};
-
-/* ADS7846 is connected through SSP ... and if your board has J5 populated,
- * you can select it to replace the ucb1400 by switching the touchscreen cable
- * (to J5) and poking board registers (as done below).  Else it's only useful
- * for the temperature sensors.
- */
-static struct pxa2xx_spi_controller pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static int lubbock_ads7846_pendown_state(void)
-{
-	/* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
-	return 0;
-}
-
-static struct ads7846_platform_data ads_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,		/* internal, no cap */
-	.get_pendown_state	= lubbock_ads7846_pendown_state,
-	// .x_plate_ohms		= 500,	/* GUESS! */
-	// .y_plate_ohms		= 500,	/* GUESS! */
-};
-
-static void ads7846_cs(u32 command)
-{
-	static const unsigned	TS_nCS = 1 << 11;
-	lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
-}
-
-static struct pxa2xx_spi_chip ads_hw = {
-	.tx_threshold		= 1,
-	.rx_threshold		= 2,
-	.cs_control		= ads7846_cs,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = { {
-	.modalias	= "ads7846",
-	.platform_data	= &ads_info,
-	.controller_data = &ads_hw,
-	.irq		= LUBBOCK_BB_IRQ,
-	.max_speed_hz	= 120000 /* max sample rate at 3V */
-				* 26 /* command + data + overhead */,
-	.bus_num	= 1,
-	.chip_select	= 0,
-},
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= 0x0c000c00,
-		.end	= 0x0c0fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LUBBOCK_ETH_IRQ,
-		.end	= LUBBOCK_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-	[2] = {
-		.name	= "smc91x-attrib",
-		.start	= 0x0e000000,
-		.end	= 0x0e0fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct smc91x_platdata lubbock_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &lubbock_smc91x_info,
-	},
-};
-
-static struct resource flash_resources[] = {
-	[0] = {
-		.start	= 0x00000000,
-		.end	= SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x04000000,
-		.end	= 0x04000000 + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition lubbock_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	},{
-		.name =		"Kernel",
-		.size =		0x00100000,
-		.offset =	0x00040000,
-	},{
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00140000
-	}
-};
-
-static struct flash_platform_data lubbock_flash_data[2] = {
-	{
-		.map_name	= "cfi_probe",
-		.parts		= lubbock_partitions,
-		.nr_parts	= ARRAY_SIZE(lubbock_partitions),
-	}, {
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	}
-};
-
-static struct platform_device lubbock_flash_device[2] = {
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 0,
-		.dev = {
-			.platform_data = &lubbock_flash_data[0],
-		},
-		.resource = &flash_resources[0],
-		.num_resources = 1,
-	},
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 1,
-		.dev = {
-			.platform_data = &lubbock_flash_data[1],
-		},
-		.resource = &flash_resources[1],
-		.num_resources = 1,
-	},
-};
-
-static struct resource lubbock_cplds_resources[] = {
-	[0] = {
-		.start	= LUBBOCK_FPGA_PHYS + 0xc0,
-		.end	= LUBBOCK_FPGA_PHYS + 0xe0 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(0),
-		.end	= PXA_GPIO_TO_IRQ(0),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-	[2] = {
-		.start	= LUBBOCK_IRQ(0),
-		.end	= LUBBOCK_IRQ(6),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lubbock_cplds_device = {
-	.name		= "pxa_cplds_irqs",
-	.id		= -1,
-	.resource	= &lubbock_cplds_resources[0],
-	.num_resources	= 3,
-};
-
-
-static struct platform_device *devices[] __initdata = {
-	&sa1111_device,
-	&smc91x_device,
-	&lubbock_flash_device[0],
-	&lubbock_flash_device[1],
-	&lubbock_cplds_device,
-};
-
-static struct pxafb_mode_info sharp_lm8v31_mode = {
-	.pixclock	= 270000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 3,
-	.right_margin	= 3,
-	.vsync_len	= 1,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info sharp_lm8v31 = {
-	.modes		= &sharp_lm8v31_mode,
-	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
-			  LCD_AC_BIAS_FREQ(255),
-};
-
-#define	MMC_POLL_RATE		msecs_to_jiffies(1000)
-
-static irq_handler_t mmc_detect_int;
-static void *mmc_detect_int_data;
-static struct timer_list mmc_timer;
-
-static void lubbock_mmc_poll(struct timer_list *unused)
-{
-	unsigned long flags;
-
-	/* clear any previous irq state, then ... */
-	local_irq_save(flags);
-	LUB_IRQ_SET_CLR &= ~(1 << 0);
-	local_irq_restore(flags);
-
-	/* poll until mmc/sd card is removed */
-	if (LUB_IRQ_SET_CLR & (1 << 0))
-		mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
-	else {
-		(void) mmc_detect_int(LUBBOCK_SD_IRQ, mmc_detect_int_data);
-		enable_irq(LUBBOCK_SD_IRQ);
-	}
-}
-
-static irqreturn_t lubbock_detect_int(int irq, void *data)
-{
-	/* IRQ is level triggered; disable, and poll for removal */
-	disable_irq(irq);
-	mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
-
-	return mmc_detect_int(irq, data);
-}
-
-static int lubbock_mci_init(struct device *dev,
-		irq_handler_t detect_int,
-		void *data)
-{
-	/* detect card insert/eject */
-	mmc_detect_int = detect_int;
-	mmc_detect_int_data = data;
-	timer_setup(&mmc_timer, lubbock_mmc_poll, 0);
-	return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
-			   0, "lubbock-sd-detect", data);
-}
-
-static int lubbock_mci_get_ro(struct device *dev)
-{
-	return (LUB_MISC_RD & (1 << 2)) != 0;
-}
-
-static void lubbock_mci_exit(struct device *dev, void *data)
-{
-	free_irq(LUBBOCK_SD_IRQ, data);
-	del_timer_sync(&mmc_timer);
-}
-
-static struct pxamci_platform_data lubbock_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay_ms	= 10,
-	.init 			= lubbock_mci_init,
-	.get_ro			= lubbock_mci_get_ro,
-	.exit 			= lubbock_mci_exit,
-};
-
-static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (mode & IR_SIRMODE) {
-		lubbock_set_misc_wr(BIT(4), 0);
-	} else if (mode & IR_FIRMODE) {
-		lubbock_set_misc_wr(BIT(4), BIT(4));
-	}
-	pxa2xx_transceiver_mode(dev, mode);
-	local_irq_restore(flags);
-}
-
-static struct pxaficp_platform_data lubbock_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE,
-	.transceiver_mode	= lubbock_irda_transceiver_mode,
-};
-
-static void __init lubbock_init(void)
-{
-	int flashboot = (LUB_CONF_SWITCHES & 1);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
-
-	lubbock_misc_wr_gc = gpio_reg_init(NULL, (void *)&LUB_MISC_WR,
-					   -1, 16, "lubbock", 0, LUB_MISC_WR,
-					   NULL, NULL, NULL);
-	if (IS_ERR(lubbock_misc_wr_gc)) {
-		pr_err("Lubbock: unable to register lubbock GPIOs: %ld\n",
-		       PTR_ERR(lubbock_misc_wr_gc));
-		lubbock_misc_wr_gc = NULL;
-	}
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	lubbock_init_pcmcia();
-
-	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
-	pxa_set_udc_info(&udc_info);
-	pxa_set_fb_info(NULL, &sharp_lm8v31);
-	pxa_set_mci_info(&lubbock_mci_platform_data);
-	pxa_set_ficp_info(&lubbock_ficp_platform_data);
-	pxa_set_ac97_info(NULL);
-
-	lubbock_flash_data[0].width = lubbock_flash_data[1].width =
-		(__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
-	/* Compensate for the nROMBT switch which swaps the flash banks */
-	printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
-	       flashboot?"Flash":"ROM", flashboot);
-
-	lubbock_flash_data[flashboot^1].name = "application-flash";
-	lubbock_flash_data[flashboot].name = "boot-rom";
-	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static struct map_desc lubbock_io_desc[] __initdata = {
-  	{	/* CPLD */
-		.virtual	=  LUBBOCK_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(LUBBOCK_FPGA_PHYS),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init lubbock_map_io(void)
-{
-	pxa25x_map_io();
-	iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
-
-	PCFR |= PCFR_OPDE;
-}
-
-/*
- * Driver for the 8 discrete LEDs available for general use:
- * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
- * so be sure to not monkey with them here.
- */
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct lubbock_led {
-	struct led_classdev	cdev;
-	u8			mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} lubbock_leds[] = {
-	{ "lubbock:D28", "default-on", },
-	{ "lubbock:D27", "cpu0", },
-	{ "lubbock:D26", "heartbeat" },
-	{ "lubbock:D25", },
-	{ "lubbock:D24", },
-	{ "lubbock:D23", },
-	{ "lubbock:D22", },
-	{ "lubbock:D21", },
-};
-
-static void lubbock_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	struct lubbock_led *led = container_of(cdev,
-					 struct lubbock_led, cdev);
-	u32 reg = LUB_DISC_BLNK_LED;
-
-	if (b != LED_OFF)
-		reg |= led->mask;
-	else
-		reg &= ~led->mask;
-
-	LUB_DISC_BLNK_LED = reg;
-}
-
-static enum led_brightness lubbock_led_get(struct led_classdev *cdev)
-{
-	struct lubbock_led *led = container_of(cdev,
-					 struct lubbock_led, cdev);
-	u32 reg = LUB_DISC_BLNK_LED;
-
-	return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int __init lubbock_leds_init(void)
-{
-	int i;
-
-	if (!machine_is_lubbock())
-		return -ENODEV;
-
-	/* All ON */
-	LUB_DISC_BLNK_LED |= 0xff;
-	for (i = 0; i < ARRAY_SIZE(lubbock_leds); i++) {
-		struct lubbock_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = lubbock_leds[i].name;
-		led->cdev.brightness_set = lubbock_led_set;
-		led->cdev.brightness_get = lubbock_led_get;
-		led->cdev.default_trigger = lubbock_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(lubbock_leds_init);
-#endif
-
-MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
-	/* Maintainer: MontaVista Software Inc. */
-	.map_io		= lubbock_map_io,
-	.nr_irqs	= LUBBOCK_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= lubbock_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
deleted file mode 100644
index cd9fa465b9b2..000000000000
--- a/arch/arm/mach-pxa/magician.c
+++ /dev/null
@@ -1,1054 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support for HTC Magician PDA phones:
- * i-mate JAM, O2 Xda mini, Orange SPV M500, Qtek s100, Qtek s110
- * and T-Mobile MDA Compact.
- *
- * Copyright (c) 2006-2007 Philipp Zabel
- *
- * Based on hx4700.c, spitz.c and others.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/mfd/htc-pasic3.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pda_power.h>
-#include <linux/platform_data/gpio-htc-egpio.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/regulator/machine.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/system_info.h>
-
-#include "pxa27x.h"
-#include <mach/magician.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-
-#include <linux/regulator/max1586.h>
-
-#include <linux/platform_data/pxa2xx_udc.h>
-
-#include "udc.h"
-#include "pxa27x-udc.h"
-#include "devices.h"
-#include "generic.h"
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/spi/ads7846.h>
-
-static unsigned long magician_pin_config[] __initdata = {
-
-	/* SDRAM and Static Memory I/O Signals */
-	GPIO20_nSDCS_2,
-	GPIO21_nSDCS_3,
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,	/* PASIC3 */
-	GPIO79_nCS_3,	/* EGPIO CPLD */
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-
-	/* I2C UDA1380 + OV9640 */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* PWM 0 - LCD backlight */
-	GPIO16_PWM0_OUT,
-
-	/* I2S UDA1380 capture */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO31_I2S_SYNC,
-	GPIO113_I2S_SYSCLK,
-
-	/* SSP 1 UDA1380 playback */
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-
-	/* SSP 2 TSC2046 touchscreen */
-	GPIO19_SSP2_SCLK,
-	MFP_CFG_OUT(GPIO14, AF0, DRIVE_HIGH),	/* frame as GPIO */
-	GPIO89_SSP2_TXD,
-	GPIO88_SSP2_RXD,
-
-	/* MMC/SD/SDHC slot */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* QCI camera interface */
-	GPIO12_CIF_DD_7,
-	GPIO17_CIF_DD_6,
-	GPIO50_CIF_DD_3,
-	GPIO51_CIF_DD_2,
-	GPIO52_CIF_DD_4,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO55_CIF_DD_1,
-	GPIO81_CIF_DD_0,
-	GPIO82_CIF_DD_5,
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-
-	/* Magician specific input GPIOs */
-	GPIO9_GPIO,	/* unknown */
-	GPIO10_GPIO,	/* GSM_IRQ */
-	GPIO13_GPIO,	/* CPLD_IRQ */
-	GPIO107_GPIO,	/* DS1WM_IRQ */
-	GPIO108_GPIO,	/* GSM_READY */
-	GPIO115_GPIO,	/* nPEN_IRQ */
-};
-
-/*
- * IrDA
- */
-
-static struct pxaficp_platform_data magician_ficp_info = {
-	.gpio_pwdown		= GPIO83_MAGICIAN_nIR_EN,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.gpio_pwdown_inverted	= 0,
-};
-
-/*
- * GPIO Keys
- */
-
-#define INIT_KEY(_code, _gpio, _desc)	\
-	{				\
-		.code	= KEY_##_code,	\
-		.gpio	= _gpio,	\
-		.desc	= _desc,	\
-		.type	= EV_KEY,	\
-		.wakeup	= 1,		\
-	}
-
-static struct gpio_keys_button magician_button_table[] = {
-	INIT_KEY(POWER,      GPIO0_MAGICIAN_KEY_POWER,      "Power button"),
-	INIT_KEY(ESC,        GPIO37_MAGICIAN_KEY_HANGUP,    "Hangup button"),
-	INIT_KEY(F10,        GPIO38_MAGICIAN_KEY_CONTACTS,  "Contacts button"),
-	INIT_KEY(CALENDAR,   GPIO90_MAGICIAN_KEY_CALENDAR,  "Calendar button"),
-	INIT_KEY(CAMERA,     GPIO91_MAGICIAN_KEY_CAMERA,    "Camera button"),
-	INIT_KEY(UP,         GPIO93_MAGICIAN_KEY_UP,        "Up button"),
-	INIT_KEY(DOWN,       GPIO94_MAGICIAN_KEY_DOWN,      "Down button"),
-	INIT_KEY(LEFT,       GPIO95_MAGICIAN_KEY_LEFT,      "Left button"),
-	INIT_KEY(RIGHT,      GPIO96_MAGICIAN_KEY_RIGHT,     "Right button"),
-	INIT_KEY(KPENTER,    GPIO97_MAGICIAN_KEY_ENTER,     "Action button"),
-	INIT_KEY(RECORD,     GPIO98_MAGICIAN_KEY_RECORD,    "Record button"),
-	INIT_KEY(VOLUMEUP,   GPIO100_MAGICIAN_KEY_VOL_UP,   "Volume up"),
-	INIT_KEY(VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, "Volume down"),
-	INIT_KEY(PHONE,      GPIO102_MAGICIAN_KEY_PHONE,    "Phone button"),
-	INIT_KEY(PLAY,       GPIO99_MAGICIAN_HEADPHONE_IN,  "Headset button"),
-};
-
-static struct gpio_keys_platform_data gpio_keys_data = {
-	.buttons	= magician_button_table,
-	.nbuttons	= ARRAY_SIZE(magician_button_table),
-};
-
-static struct platform_device gpio_keys = {
-	.name	= "gpio-keys",
-	.dev	= {
-		.platform_data = &gpio_keys_data,
-	},
-	.id	= -1,
-};
-
-/*
- * EGPIO (Xilinx CPLD)
- *
- * 32-bit aligned 8-bit registers
- * 16 possible registers (reg windows size), only 7 used:
- * 3x output, 1x irq, 3x input
- */
-
-static struct resource egpio_resources[] = {
-	[0] = {
-		.start	= PXA_CS3_PHYS,
-		.end	= PXA_CS3_PHYS + 0x20 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct htc_egpio_chip egpio_chips[] = {
-	[0] = {
-		.reg_start	= 0,
-		.gpio_base	= MAGICIAN_EGPIO(0, 0),
-		.num_gpios	= 24,
-		.direction	= HTC_EGPIO_OUTPUT,
-		/*
-		 * Depends on modules configuration
-		 */
-		.initial_values	= 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
-	},
-	[1] = {
-		.reg_start	= 4,
-		.gpio_base	= MAGICIAN_EGPIO(4, 0),
-		.num_gpios	= 24,
-		.direction	= HTC_EGPIO_INPUT,
-	},
-};
-
-static struct htc_egpio_platform_data egpio_info = {
-	.reg_width	= 8,
-	.bus_width	= 32,
-	.irq_base	= IRQ_BOARD_START,
-	.num_irqs	= 4,
-	.ack_register	= 3,
-	.chip		= egpio_chips,
-	.num_chips	= ARRAY_SIZE(egpio_chips),
-};
-
-static struct platform_device egpio = {
-	.name		= "htc-egpio",
-	.id		= -1,
-	.resource	= egpio_resources,
-	.num_resources	= ARRAY_SIZE(egpio_resources),
-	.dev = {
-		.platform_data = &egpio_info,
-	},
-};
-
-/*
- * PXAFB LCD - Toppoly TD028STEB1 or Samsung LTP280QV
- */
-
-static struct pxafb_mode_info toppoly_modes[] = {
-	{
-		.pixclock	= 96153,
-		.bpp		= 16,
-		.xres		= 240,
-		.yres		= 320,
-		.hsync_len	= 11,
-		.vsync_len	= 3,
-		.left_margin	= 19,
-		.upper_margin	= 2,
-		.right_margin	= 10,
-		.lower_margin	= 2,
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mode_info samsung_modes[] = {
-	{
-		.pixclock	= 226469,
-		.bpp		= 16,
-		.xres		= 240,
-		.yres		= 320,
-		.hsync_len	= 8,
-		.vsync_len	= 4,
-		.left_margin	= 9,
-		.upper_margin	= 4,
-		.right_margin	= 9,
-		.lower_margin	= 4,
-		.sync	= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	},
-};
-
-static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	pr_debug("Toppoly LCD power: %s\n", on ? "on" : "off");
-
-	if (on) {
-		gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
-		udelay(2000);
-		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
-		udelay(2000);
-		/* FIXME: enable LCDC here */
-		udelay(2000);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
-		udelay(2000);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
-	} else {
-		msleep(15);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
-		udelay(500);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
-		udelay(1000);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
-		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
-	}
-}
-
-static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	pr_debug("Samsung LCD power: %s\n", on ? "on" : "off");
-
-	if (on) {
-		if (system_rev < 3)
-			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1);
-		else
-			gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
-		mdelay(6);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
-		mdelay(6);	/* Avdd -> Voff >5ms */
-		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
-		mdelay(16);	/* Voff -> Von >(5+10)ms */
-		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
-	} else {
-		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
-		mdelay(16);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
-		mdelay(6);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
-		mdelay(6);
-		if (system_rev < 3)
-			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
-		else
-			gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
-	}
-}
-
-static struct pxafb_mach_info toppoly_info = {
-	.modes			= toppoly_modes,
-	.num_modes		= 1,
-	.fixed_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP,
-	.pxafb_lcd_power	= toppoly_lcd_power,
-};
-
-static struct pxafb_mach_info samsung_info = {
-	.modes			= samsung_modes,
-	.num_modes		= 1,
-	.fixed_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-		LCD_ALTERNATE_MAPPING,
-	.pxafb_lcd_power	= samsung_lcd_power,
-};
-
-/*
- * Backlight
- */
-
-static struct pwm_lookup magician_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 30923,
-		   PWM_POLARITY_NORMAL),
-};
-
- /*
- * fixed regulator for pwm_backlight
- */
-
-static struct regulator_consumer_supply pwm_backlight_supply[] = {
-	REGULATOR_SUPPLY("power", "pwm_backlight"),
-};
-
-
-static struct gpio magician_bl_gpios[] = {
-	{ EGPIO_MAGICIAN_BL_POWER,	GPIOF_DIR_OUT, "Backlight power" },
-	{ EGPIO_MAGICIAN_BL_POWER2,	GPIOF_DIR_OUT, "Backlight power 2" },
-};
-
-static int magician_backlight_init(struct device *dev)
-{
-	return gpio_request_array(ARRAY_AND_SIZE(magician_bl_gpios));
-}
-
-static int magician_backlight_notify(struct device *dev, int brightness)
-{
-	pr_debug("Brightness = %i\n", brightness);
-	gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
-	if (brightness >= 200) {
-		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
-		return brightness - 72;
-	} else {
-		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0);
-		return brightness;
-	}
-}
-
-static void magician_backlight_exit(struct device *dev)
-{
-	gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios));
-}
-
-/*
- * LCD PWM backlight (main)
- *
- * MP1521 frequency should be:
- *	100-400 Hz = 2 .5*10^6 - 10 *10^6 ns
- */
-
-static struct platform_pwm_backlight_data backlight_data = {
-	.max_brightness	= 272,
-	.dft_brightness	= 100,
-	.init		= magician_backlight_init,
-	.notify		= magician_backlight_notify,
-	.exit		= magician_backlight_exit,
-};
-
-static struct platform_device backlight = {
-	.name	= "pwm-backlight",
-	.id	= -1,
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &backlight_data,
-	},
-};
-
-/*
- * GPIO LEDs, Phone keys backlight, vibra
- */
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name = "magician::vibra",
-		.default_trigger = "none",
-		.gpio = GPIO22_MAGICIAN_VIBRA_EN,
-	},
-	{
-		.name = "magician::phone_bl",
-		.default_trigger = "backlight",
-		.gpio = GPIO103_MAGICIAN_LED_KP,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds = gpio_leds,
-	.num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &gpio_led_info,
-	},
-};
-
-/*
- * PASIC3 with DS1WM
- */
-
-static struct resource pasic3_resources[] = {
-	[0] = {
-		.start	= PXA_CS2_PHYS,
-		.end	= PXA_CS2_PHYS + 0x1b,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct pasic3_platform_data pasic3_platform_data = {
-	.clock_rate = 4000000,
-};
-
-static struct platform_device pasic3 = {
-	.name		= "pasic3",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pasic3_resources),
-	.resource	= pasic3_resources,
-	.dev = {
-		.platform_data = &pasic3_platform_data,
-	},
-};
-
-/*
- * PXA UDC
- */
-
-static void magician_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE);
-}
-
-static struct pxa2xx_udc_mach_info magician_udc_info __initdata = {
-	.udc_command	= magician_udc_command,
-	.gpio_pullup	= GPIO27_MAGICIAN_USBC_PUEN,
-};
-
-/*
- * USB device VBus detection
- */
-
-static struct resource gpio_vbus_resource = {
-	.flags	= IORESOURCE_IRQ,
-	.start	= IRQ_MAGICIAN_VBUS,
-	.end	= IRQ_MAGICIAN_VBUS,
-};
-
-static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		/*
-		 * EGPIO on register 4 index 1, the second EGPIO chip
-		 * starts at register 4 so this will be at index 1 on that
-		 * chip.
-		 */
-		GPIO_LOOKUP("htc-egpio-1", 1,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO27_MAGICIAN_USBC_PUEN,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device gpio_vbus = {
-	.name		= "gpio-vbus",
-	.id		= -1,
-	.num_resources	= 1,
-	.resource	= &gpio_vbus_resource,
-};
-
-/*
- * External power
- */
-
-static int magician_supply_init(struct device *dev)
-{
-	int ret = -1;
-
-	ret = gpio_request(EGPIO_MAGICIAN_CABLE_TYPE, "Cable is AC charger");
-	if (ret) {
-		pr_err("Cannot request AC/USB charger GPIO (%i)\n", ret);
-		goto err_ac;
-	}
-
-	ret = gpio_request(EGPIO_MAGICIAN_CABLE_INSERTED, "Cable inserted");
-	if (ret) {
-		pr_err("Cannot request cable detection GPIO (%i)\n", ret);
-		goto err_usb;
-	}
-
-	return 0;
-
-err_usb:
-	gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
-err_ac:
-	return ret;
-}
-
-static void magician_set_charge(int flags)
-{
-	if (flags & PDA_POWER_CHARGE_AC) {
-		pr_debug("Charging from AC\n");
-		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
-	} else if (flags & PDA_POWER_CHARGE_USB) {
-		pr_debug("Charging from USB\n");
-		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
-	} else {
-		pr_debug("Charging disabled\n");
-		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 0);
-	}
-}
-
-static int magician_is_ac_online(void)
-{
-	return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
-		gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE); /* AC=1 */
-}
-
-static int magician_is_usb_online(void)
-{
-	return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
-		(!gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE)); /* USB=0 */
-}
-
-static void magician_supply_exit(struct device *dev)
-{
-	gpio_free(EGPIO_MAGICIAN_CABLE_INSERTED);
-	gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
-}
-
-static char *magician_supplicants[] = {
-	"ds2760-battery.0", "backup-battery"
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init			= magician_supply_init,
-	.exit			= magician_supply_exit,
-	.is_ac_online		= magician_is_ac_online,
-	.is_usb_online		= magician_is_usb_online,
-	.set_charge		= magician_set_charge,
-	.supplied_to		= magician_supplicants,
-	.num_supplicants	= ARRAY_SIZE(magician_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = {
-		.name	= "ac",
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-			IORESOURCE_IRQ_LOWEDGE,
-		.start	= IRQ_MAGICIAN_VBUS,
-		.end	= IRQ_MAGICIAN_VBUS,
-	},
-	[1] = {
-		.name	= "usb",
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-			IORESOURCE_IRQ_LOWEDGE,
-		.start	= IRQ_MAGICIAN_VBUS,
-		.end	= IRQ_MAGICIAN_VBUS,
-	},
-};
-
-static struct platform_device power_supply = {
-	.name	= "pda-power",
-	.id	= -1,
-	.dev = {
-		.platform_data = &power_supply_info,
-	},
-	.resource	= power_supply_resources,
-	.num_resources	= ARRAY_SIZE(power_supply_resources),
-};
-
-/*
- * Battery charger
- */
-
-static struct regulator_consumer_supply bq24022_consumers[] = {
-	REGULATOR_SUPPLY("vbus_draw", NULL),
-	REGULATOR_SUPPLY("ac_draw", NULL),
-};
-
-static struct regulator_init_data bq24022_init_data = {
-	.constraints = {
-		.max_uA		= 500000,
-		.valid_ops_mask	= REGULATOR_CHANGE_CURRENT |
-			REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(bq24022_consumers),
-	.consumer_supplies	= bq24022_consumers,
-};
-
-
-static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW };
-
-static struct gpio_regulator_state bq24022_states[] = {
-	{ .value = 100000, .gpios = (0 << 0) },
-	{ .value = 500000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config bq24022_info = {
-	.supply_name		= "bq24022",
-
-	.enabled_at_boot	= 1,
-
-	.gflags = bq24022_gpiod_gflags,
-	.ngpios = ARRAY_SIZE(bq24022_gpiod_gflags),
-
-	.states			= bq24022_states,
-	.nr_states		= ARRAY_SIZE(bq24022_states),
-
-	.type			= REGULATOR_CURRENT,
-	.init_data		= &bq24022_init_data,
-};
-
-static struct platform_device bq24022 = {
-	.name	= "gpio-regulator",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &bq24022_info,
-	},
-};
-
-static struct gpiod_lookup_table bq24022_gpiod_table = {
-	.dev_id = "gpio-regulator",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", EGPIO_MAGICIAN_BQ24022_ISET2,
-			    NULL, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
-			    "enable", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/*
- * fixed regulator for ads7846
- */
-
-static struct regulator_consumer_supply ads7846_supply =
-	REGULATOR_SUPPLY("vcc", "spi2.0");
-
-static struct regulator_init_data vads7846_regulator = {
-	.constraints	= {
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &ads7846_supply,
-};
-
-static struct fixed_voltage_config vads7846 = {
-	.supply_name	= "vads7846",
-	.microvolts	= 3300000, /* probably */
-	.startup_delay	= 0,
-	.init_data	= &vads7846_regulator,
-};
-
-static struct platform_device vads7846_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &vads7846,
-	},
-};
-
-/*
- * Vcore regulator MAX1587A
- */
-
-static struct regulator_consumer_supply magician_max1587a_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data magician_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 700000,
-		.max_uV		= 1475000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= magician_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(magician_max1587a_consumers),
-};
-
-static struct max1586_subdev_data magician_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &magician_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data magician_max1587a_info = {
-	.subdevs     = magician_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(magician_max1587a_subdevs),
-	/*
-	 * NOTICE measured directly on the PCB (board_id == 0x3a), but
-	 * if R24 is present, it will boost the voltage
-	 * (write 1.475V, get 1.645V and smoke)
-	 */
-	.v3_gain     = MAX1586_GAIN_NO_R24,
-};
-
-static struct i2c_board_info magician_pwr_i2c_board_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &magician_max1587a_info,
-	},
-};
-
-/*
- * MMC/SD
- */
-
-static int magician_mci_init(struct device *dev,
-	irq_handler_t detect_irq, void *data)
-{
-	return request_irq(IRQ_MAGICIAN_SD, detect_irq, 0,
-		"mmc card detect", data);
-}
-
-static void magician_mci_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_MAGICIAN_SD, data);
-}
-
-static struct pxamci_platform_data magician_mci_info = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init			= magician_mci_init,
-	.exit			= magician_mci_exit,
-	.gpio_card_ro_invert	= 1,
-};
-
-/*
- * Write protect on EGPIO register 5 index 4, this is on the second HTC
- * EGPIO chip which starts at register 4, so we need offset 8+4=12 on that
- * particular chip.
- */
-#define EGPIO_MAGICIAN_nSD_READONLY_OFFSET 12
-/*
- * Power on EGPIO register 2 index 0, so this is on the first HTC EGPIO chip
- * starting at register 0 so we need offset 2*8+0 = 16 on that chip.
- */
-#define EGPIO_MAGICIAN_nSD_POWER_OFFSET 16
-
-static struct gpiod_lookup_table magician_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("htc-egpio-1", EGPIO_MAGICIAN_nSD_READONLY_OFFSET,
-			    "wp", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("htc-egpio-0", EGPIO_MAGICIAN_nSD_POWER_OFFSET,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/*
- * USB OHCI
- */
-
-static struct pxaohci_platform_data magician_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	/* port1: CSR Bluetooth, port2: OTG with UDC */
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
-	.power_budget	= 0,
-	.power_on_delay = 100,
-};
-
-/*
- * StrataFlash
- */
-
-static int magician_flash_init(struct platform_device *pdev)
-{
-	int ret = gpio_request(EGPIO_MAGICIAN_FLASH_VPP, "flash Vpp enable");
-
-	if (ret) {
-		pr_err("Cannot request flash enable GPIO (%i)\n", ret);
-		return ret;
-	}
-
-	ret = gpio_direction_output(EGPIO_MAGICIAN_FLASH_VPP, 1);
-	if (ret) {
-		pr_err("Cannot set direction for flash enable (%i)\n", ret);
-		gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
-	}
-
-	return ret;
-}
-
-static void magician_set_vpp(struct platform_device *pdev, int vpp)
-{
-	gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
-}
-
-static void magician_flash_exit(struct platform_device *pdev)
-{
-	gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
-}
-
-static struct resource strataflash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct mtd_partition magician_flash_parts[] = {
-	{
-		.name		= "Bootloader",
-		.offset		= 0x0,
-		.size		= 0x40000,
-		.mask_flags	= MTD_WRITEABLE, /* EXPERIMENTAL */
-	},
-	{
-		.name		= "Linux Kernel",
-		.offset		= 0x40000,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-/*
- * physmap-flash driver
- */
-
-static struct physmap_flash_data strataflash_data = {
-	.width		= 4,
-	.init		= magician_flash_init,
-	.set_vpp	= magician_set_vpp,
-	.exit		= magician_flash_exit,
-	.parts		= magician_flash_parts,
-	.nr_parts	= ARRAY_SIZE(magician_flash_parts),
-};
-
-static struct platform_device strataflash = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= &strataflash_resource,
-	.num_resources	= 1,
-	.dev = {
-		.platform_data = &strataflash_data,
-	},
-};
-
-/*
- * PXA I2C main controller
- */
-
-static struct i2c_pxa_platform_data i2c_info = {
-	/* OV9640 I2C device doesn't support fast mode */
-	.fast_mode	= 0,
-};
-
-/*
- * PXA I2C power controller
- */
-
-static struct i2c_pxa_platform_data magician_i2c_power_info = {
-	.fast_mode	= 1,
-};
-
-/*
- * Touchscreen
- */
-
-static struct ads7846_platform_data ads7846_pdata = {
-	.model		= 7846,
-	.x_plate_ohms	= 317,
-	.y_plate_ohms	= 500,
-	.pressure_max	= 1023,	/* with x plate ohms it will overflow 255 */
-	.debounce_max	= 3,	/* first readout is always bad */
-	.debounce_tol	= 30,
-	.debounce_rep	= 0,
-	.gpio_pendown	= GPIO115_MAGICIAN_nPEN_IRQ,
-	.keep_vref_on	= 1,
-	.wakeup		= true,
-	.vref_delay_usecs		= 100,
-	.penirq_recheck_delay_usecs	= 100,
-};
-
-struct pxa2xx_spi_chip tsc2046_chip_info = {
-	.tx_threshold	= 1,
-	.rx_threshold	= 2,
-	.timeout	= 64,
-	/* NOTICE must be GPIO, incompatibility with hw PXA SPI framing */
-	.gpio_cs	= GPIO14_MAGICIAN_TSC2046_CS,
-};
-
-static struct pxa2xx_spi_controller magician_spi_info = {
-	.num_chipselect	= 1,
-	.enable_dma	= 1,
-};
-
-static struct spi_board_info ads7846_spi_board_info[] __initdata = {
-	{
-		.modalias		= "ads7846",
-		.bus_num		= 2,
-		.max_speed_hz		= 2500000,
-		.platform_data		= &ads7846_pdata,
-		.controller_data	= &tsc2046_chip_info,
-		.irq = PXA_GPIO_TO_IRQ(GPIO115_MAGICIAN_nPEN_IRQ),
-	},
-};
-
-/*
- * Platform devices
- */
-
-static struct platform_device *devices[] __initdata = {
-	&gpio_keys,
-	&egpio,
-	&backlight,
-	&pasic3,
-	&bq24022,
-	&gpio_vbus,
-	&power_supply,
-	&strataflash,
-	&leds_gpio,
-	&vads7846_device,
-};
-
-static struct gpio magician_global_gpios[] = {
-	{ GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" },
-	{ GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
-
-	/* NOTICE valid LCD init sequence */
-	{ GPIO106_MAGICIAN_LCD_DCDC_NRESET, GPIOF_OUT_INIT_LOW, "LCD DCDC nreset" },
-	{ GPIO104_MAGICIAN_LCD_VOFF_EN, GPIOF_OUT_INIT_LOW, "LCD VOFF enable" },
-	{ GPIO105_MAGICIAN_LCD_VON_EN, GPIOF_OUT_INIT_LOW, "LCD VON enable" },
-};
-
-static void __init magician_init(void)
-{
-	void __iomem *cpld;
-	int lcd_select;
-	int err;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
-	err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios));
-	if (err)
-		pr_err("magician: Failed to request global GPIOs: %d\n", err);
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-
-	pwm_add_table(magician_pwm_lookup, ARRAY_SIZE(magician_pwm_lookup));
-
-	pxa_set_ficp_info(&magician_ficp_info);
-	pxa27x_set_i2c_power_info(&magician_i2c_power_info);
-	pxa_set_i2c_info(&i2c_info);
-
-	i2c_register_board_info(1,
-		ARRAY_AND_SIZE(magician_pwr_i2c_board_info));
-
-	gpiod_add_lookup_table(&magician_mci_gpio_table);
-	pxa_set_mci_info(&magician_mci_info);
-	pxa_set_ohci_info(&magician_ohci_info);
-	pxa_set_udc_info(&magician_udc_info);
-
-	/* Check LCD type we have */
-	cpld = ioremap(PXA_CS3_PHYS, 0x1000);
-	if (cpld) {
-		u8 board_id = __raw_readb(cpld + 0x14);
-
-		iounmap(cpld);
-		system_rev = board_id & 0x7;
-		lcd_select = board_id & 0x8;
-		pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
-		if (lcd_select && (system_rev < 3))
-			/* NOTICE valid LCD init sequence */
-			gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER,
-				GPIOF_OUT_INIT_LOW, "Samsung LCD Power");
-		pxa_set_fb_info(NULL,
-			lcd_select ? &samsung_info : &toppoly_info);
-	} else
-		pr_err("LCD detection: CPLD mapping failed\n");
-
-	pxa2xx_set_spi_info(2, &magician_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(ads7846_spi_board_info));
-
-	regulator_register_always_on(0, "power", pwm_backlight_supply,
-		ARRAY_SIZE(pwm_backlight_supply), 5000000);
-
-	gpiod_add_lookup_table(&bq24022_gpiod_table);
-	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(devices));
-}
-
-MACHINE_START(MAGICIAN, "HTC Magician")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= MAGICIAN_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_machine	= magician_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
deleted file mode 100644
index d1010ec26e9f..000000000000
--- a/arch/arm/mach-pxa/mainstone.c
+++ /dev/null
@@ -1,725 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/mainstone.c
- *
- *  Support for the Intel HCDDBBVA0 Development Platform.
- *  (go figure how they came up with such name...)
- *
- *  Author:	Nicolas Pitre
- *  Created:	Nov 05, 2002
- *  Copyright:	MontaVista Software Inc.
- */
-#include <linux/gpio.h>
-#include <linux/gpio/gpio-reg.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/smc91x.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include "pxa27x.h"
-#include <mach/mainstone.h>
-#include <mach/audio.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/smemc.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long mainstone_pin_config[] = {
-	/* Chip Select */
-	GPIO15_nCS_1,
-
-	/* LCD - 16bpp Active TFT */
-	GPIOxx_LCD_TFT_16BPP,
-	GPIO16_PWM0_OUT,	/* Backlight */
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* USB Host Port 1 */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO45_AC97_SYSCLK,
-
-	/* Keypad */
-	GPIO93_KP_DKIN_0,
-	GPIO94_KP_DKIN_1,
-	GPIO95_KP_DKIN_2,
-	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO96_KP_MKOUT_6,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* GPIO */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (MST_ETH_PHYS + 0x300),
-		.end	= (MST_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MAINSTONE_IRQ(3),
-		.end	= MAINSTONE_IRQ(3),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata mainstone_smc91x_info = {
-	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
-		  SMC91X_NOWAIT | SMC91X_USE_DMA,
-	.pxa_u16_align4 = true,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &mainstone_smc91x_info,
-	},
-};
-
-static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
-{
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		MST_MSCWR2 &= ~MST_MSCWR2_AC97_SPKROFF;
-	return 0;
-}
-
-static void mst_audio_shutdown(struct snd_pcm_substream *substream, void *priv)
-{
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
-}
-
-static long mst_audio_suspend_mask;
-
-static void mst_audio_suspend(void *priv)
-{
-	mst_audio_suspend_mask = MST_MSCWR2;
-	MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
-}
-
-static void mst_audio_resume(void *priv)
-{
-	MST_MSCWR2 &= mst_audio_suspend_mask | ~MST_MSCWR2_AC97_SPKROFF;
-}
-
-static pxa2xx_audio_ops_t mst_audio_ops = {
-	.startup	= mst_audio_startup,
-	.shutdown	= mst_audio_shutdown,
-	.suspend	= mst_audio_suspend,
-	.resume		= mst_audio_resume,
-};
-
-static struct resource flash_resources[] = {
-	[0] = {
-		.start	= PXA_CS0_PHYS,
-		.end	= PXA_CS0_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_CS1_PHYS,
-		.end	= PXA_CS1_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition mainstoneflash0_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	},{
-		.name =		"Kernel",
-		.size =		0x00400000,
-		.offset =	0x00040000,
-	},{
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00440000
-	}
-};
-
-static struct flash_platform_data mst_flash_data[2] = {
-	{
-		.map_name	= "cfi_probe",
-		.parts		= mainstoneflash0_partitions,
-		.nr_parts	= ARRAY_SIZE(mainstoneflash0_partitions),
-	}, {
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	}
-};
-
-static struct platform_device mst_flash_device[2] = {
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 0,
-		.dev = {
-			.platform_data = &mst_flash_data[0],
-		},
-		.resource = &flash_resources[0],
-		.num_resources = 1,
-	},
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 1,
-		.dev = {
-			.platform_data = &mst_flash_data[1],
-		},
-		.resource = &flash_resources[1],
-		.num_resources = 1,
-	},
-};
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pwm_lookup mainstone_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data mainstone_backlight_data = {
-	.max_brightness	= 1023,
-	.dft_brightness	= 1023,
-};
-
-static struct platform_device mainstone_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm0.dev,
-		.platform_data = &mainstone_backlight_data,
-	},
-};
-
-static void __init mainstone_backlight_register(void)
-{
-	int ret;
-
-	pwm_add_table(mainstone_pwm_lookup, ARRAY_SIZE(mainstone_pwm_lookup));
-
-	ret = platform_device_register(&mainstone_backlight_device);
-	if (ret) {
-		printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
-		pwm_remove_table(mainstone_pwm_lookup,
-				 ARRAY_SIZE(mainstone_pwm_lookup));
-	}
-}
-#else
-#define mainstone_backlight_register()	do { } while (0)
-#endif
-
-static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
-	.pixclock		= 50000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 1,
-	.left_margin		= 0x9f,
-	.right_margin		= 1,
-	.vsync_len		= 44,
-	.upper_margin		= 0,
-	.lower_margin		= 0,
-	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
-	.pixclock		= 110000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 4,
-	.left_margin		= 8,
-	.right_margin		= 20,
-	.vsync_len		= 3,
-	.upper_margin		= 1,
-	.lower_margin		= 10,
-	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info mainstone_pxafb_info = {
-	.num_modes      	= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_int, void *data)
-{
-	int err;
-
-	/* make sure SD/Memory Stick multiplexer's signals
-	 * are routed to MMC controller
-	 */
-	MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
-
-	err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, 0,
-			     "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-
-	return err;
-}
-
-static int mainstone_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		printk(KERN_DEBUG "%s: on\n", __func__);
-		MST_MSCWR1 |= MST_MSCWR1_MMC_ON;
-		MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
-	} else {
-		printk(KERN_DEBUG "%s: off\n", __func__);
-		MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
-	}
-	return 0;
-}
-
-static void mainstone_mci_exit(struct device *dev, void *data)
-{
-	free_irq(MAINSTONE_MMC_IRQ, data);
-}
-
-static struct pxamci_platform_data mainstone_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= mainstone_mci_init,
-	.setpower 		= mainstone_mci_setpower,
-	.exit			= mainstone_mci_exit,
-};
-
-static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (mode & IR_SIRMODE) {
-		MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
-	} else if (mode & IR_FIRMODE) {
-		MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
-	}
-	pxa2xx_transceiver_mode(dev, mode);
-	if (mode & IR_OFF) {
-		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
-	} else {
-		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
-	}
-	local_irq_restore(flags);
-}
-
-static struct pxaficp_platform_data mainstone_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= mainstone_irda_transceiver_mode,
-};
-
-static struct gpio_keys_button gpio_keys_button[] = {
-	[0] = {
-		.desc	= "wakeup",
-		.code	= KEY_SUSPEND,
-		.type	= EV_KEY,
-		.gpio	= 1,
-		.wakeup	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data mainstone_gpio_keys = {
-	.buttons	= gpio_keys_button,
-	.nbuttons	= 1,
-};
-
-static struct platform_device mst_gpio_keys_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &mainstone_gpio_keys,
-	},
-};
-
-static struct resource mst_cplds_resources[] = {
-	[0] = {
-		.start	= MST_FPGA_PHYS + 0xc0,
-		.end	= MST_FPGA_PHYS + 0xe0 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(0),
-		.end	= PXA_GPIO_TO_IRQ(0),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-	[2] = {
-		.start	= MAINSTONE_IRQ(0),
-		.end	= MAINSTONE_IRQ(15),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mst_cplds_device = {
-	.name		= "pxa_cplds_irqs",
-	.id		= -1,
-	.resource	= &mst_cplds_resources[0],
-	.num_resources	= 3,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&smc91x_device,
-	&mst_flash_device[0],
-	&mst_flash_device[1],
-	&mst_gpio_keys_device,
-	&mst_cplds_device,
-};
-
-static struct pxaohci_platform_data mainstone_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int mainstone_matrix_keys[] = {
-	KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
-	KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
-	KEY(0, 1, KEY_G), KEY(1, 1, KEY_H), KEY(2, 1, KEY_I),
-	KEY(3, 1, KEY_J), KEY(4, 1, KEY_K), KEY(5, 1, KEY_L),
-	KEY(0, 2, KEY_M), KEY(1, 2, KEY_N), KEY(2, 2, KEY_O),
-	KEY(3, 2, KEY_P), KEY(4, 2, KEY_Q), KEY(5, 2, KEY_R),
-	KEY(0, 3, KEY_S), KEY(1, 3, KEY_T), KEY(2, 3, KEY_U),
-	KEY(3, 3, KEY_V), KEY(4, 3, KEY_W), KEY(5, 3, KEY_X),
-	KEY(2, 4, KEY_Y), KEY(3, 4, KEY_Z),
-
-	KEY(0, 4, KEY_DOT),	/* . */
-	KEY(1, 4, KEY_CLOSE),	/* @ */
-	KEY(4, 4, KEY_SLASH),
-	KEY(5, 4, KEY_BACKSLASH),
-	KEY(0, 5, KEY_HOME),
-	KEY(1, 5, KEY_LEFTSHIFT),
-	KEY(2, 5, KEY_SPACE),
-	KEY(3, 5, KEY_SPACE),
-	KEY(4, 5, KEY_ENTER),
-	KEY(5, 5, KEY_BACKSPACE),
-
-	KEY(0, 6, KEY_UP),
-	KEY(1, 6, KEY_DOWN),
-	KEY(2, 6, KEY_LEFT),
-	KEY(3, 6, KEY_RIGHT),
-	KEY(4, 6, KEY_SELECT),
-};
-
-static struct matrix_keymap_data mainstone_matrix_keymap_data = {
-	.keymap			= mainstone_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(mainstone_matrix_keys),
-};
-
-struct pxa27x_keypad_platform_data mainstone_keypad_info = {
-	.matrix_key_rows	= 6,
-	.matrix_key_cols	= 7,
-	.matrix_keymap_data	= &mainstone_matrix_keymap_data,
-
-	.enable_rotary0		= 1,
-	.rotary0_up_key		= KEY_UP,
-	.rotary0_down_key	= KEY_DOWN,
-
-	.debounce_interval	= 30,
-};
-
-static void __init mainstone_init_keypad(void)
-{
-	pxa_set_keypad_info(&mainstone_keypad_info);
-}
-#else
-static inline void mainstone_init_keypad(void) {}
-#endif
-
-static int mst_pcmcia0_irqs[11] = {
-	[0 ... 10] = -1,
-	[5] = MAINSTONE_S0_CD_IRQ,
-	[8] = MAINSTONE_S0_STSCHG_IRQ,
-	[10] = MAINSTONE_S0_IRQ,
-};
-
-static int mst_pcmcia1_irqs[11] = {
-	[0 ... 10] = -1,
-	[5] = MAINSTONE_S1_CD_IRQ,
-	[8] = MAINSTONE_S1_STSCHG_IRQ,
-	[10] = MAINSTONE_S1_IRQ,
-};
-
-static struct gpiod_lookup_table mainstone_pcmcia_gpio_table = {
-	.dev_id = "pxa2xx-pcmcia",
-	.table = {
-		GPIO_LOOKUP("mst-pcmcia0",  0, "a0vpp",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  1, "a1vpp",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  2, "a0vcc",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  3, "a1vcc",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  4, "areset",  GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  5, "adetect", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia0",  6, "avs1",    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia0",  7, "avs2",    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia0",  8, "abvd1",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  9, "abvd2",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0", 10, "aready",  GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  0, "b0vpp",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  1, "b1vpp",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  2, "b0vcc",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  3, "b1vcc",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  4, "breset",  GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  5, "bdetect", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia1",  6, "bvs1",    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia1",  7, "bvs2",    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia1",  8, "bbvd1",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  9, "bbvd2",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1", 10, "bready",  GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init mainstone_init(void)
-{
-	int SW7 = 0;  /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
-
-	/* Register board control register(s) as GPIOs */
-	gpio_reg_init(NULL, (void __iomem *)&MST_PCMCIA0, -1, 11,
-		      "mst-pcmcia0", MST_PCMCIA_INPUTS, 0, NULL,
-		      NULL, mst_pcmcia0_irqs);
-	gpio_reg_init(NULL, (void __iomem *)&MST_PCMCIA1, -1, 11,
-		      "mst-pcmcia1", MST_PCMCIA_INPUTS, 0, NULL,
-		      NULL, mst_pcmcia1_irqs);
-	gpiod_add_lookup_table(&mainstone_pcmcia_gpio_table);
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	mst_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
-	mst_flash_data[1].width = 4;
-
-	/* Compensate for SW7 which swaps the flash banks */
-	mst_flash_data[SW7].name = "processor-flash";
-	mst_flash_data[SW7 ^ 1].name = "mainboard-flash";
-
-	printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
-	       mst_flash_data[0].name);
-
-	/* system bus arbiter setting
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-	/* reading Mainstone's "Virtual Configuration Register"
-	   might be handy to select LCD type here */
-	if (0)
-		mainstone_pxafb_info.modes = &toshiba_ltm04c380k_mode;
-	else
-		mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
-
-	pxa_set_fb_info(NULL, &mainstone_pxafb_info);
-	mainstone_backlight_register();
-
-	pxa_set_mci_info(&mainstone_mci_platform_data);
-	pxa_set_ficp_info(&mainstone_ficp_platform_data);
-	pxa_set_ohci_info(&mainstone_ohci_platform_data);
-	pxa_set_i2c_info(NULL);
-	pxa_set_ac97_info(&mst_audio_ops);
-
-	mainstone_init_keypad();
-}
-
-
-static struct map_desc mainstone_io_desc[] __initdata = {
-  	{	/* CPLD */
-		.virtual	=  MST_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(MST_FPGA_PHYS),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init mainstone_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
-
- 	/*	for use I SRAM as framebuffer.	*/
- 	PSLR |= 0xF04;
- 	PCFR = 0x66;
-}
-
-/*
- * Driver for the 8 discrete LEDs available for general use:
- * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
- * so be sure to not monkey with them here.
- */
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct mainstone_led {
-	struct led_classdev	cdev;
-	u8			mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} mainstone_leds[] = {
-	{ "mainstone:D28", "default-on", },
-	{ "mainstone:D27", "cpu0", },
-	{ "mainstone:D26", "heartbeat" },
-	{ "mainstone:D25", },
-	{ "mainstone:D24", },
-	{ "mainstone:D23", },
-	{ "mainstone:D22", },
-	{ "mainstone:D21", },
-};
-
-static void mainstone_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	struct mainstone_led *led = container_of(cdev,
-					 struct mainstone_led, cdev);
-	u32 reg = MST_LEDCTRL;
-
-	if (b != LED_OFF)
-		reg |= led->mask;
-	else
-		reg &= ~led->mask;
-
-	MST_LEDCTRL = reg;
-}
-
-static enum led_brightness mainstone_led_get(struct led_classdev *cdev)
-{
-	struct mainstone_led *led = container_of(cdev,
-					 struct mainstone_led, cdev);
-	u32 reg = MST_LEDCTRL;
-
-	return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int __init mainstone_leds_init(void)
-{
-	int i;
-
-	if (!machine_is_mainstone())
-		return -ENODEV;
-
-	/* All ON */
-	MST_LEDCTRL |= 0xff;
-	for (i = 0; i < ARRAY_SIZE(mainstone_leds); i++) {
-		struct mainstone_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = mainstone_leds[i].name;
-		led->cdev.brightness_set = mainstone_led_set;
-		led->cdev.brightness_get = mainstone_led_get;
-		led->cdev.default_trigger = mainstone_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(mainstone_leds_init);
-#endif
-
-MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
-	/* Maintainer: MontaVista Software Inc. */
-	.atag_offset	= 0x100,	/* BLOB boot parameter setting */
-	.map_io		= mainstone_map_io,
-	.nr_irqs	= MAINSTONE_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= mainstone_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/mfp-pxa25x.h b/arch/arm/mach-pxa/mfp-pxa25x.h
index d0ebb2154503..3dc5c833e28f 100644
--- a/arch/arm/mach-pxa/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/mfp-pxa25x.h
@@ -158,39 +158,6 @@
 #define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
 #define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
 
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO */
-#define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF1)
-#define GPIO87_GPIO		MFP_CFG_IN(GPIO87, AF1)
-#define GPIO88_GPIO		MFP_CFG_IN(GPIO88, AF1)
-#define GPIO89_GPIO		MFP_CFG_IN(GPIO89, AF1)
-
-/* SDRAM */
-#define GPIO86_nSDCS2		MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
-#define GPIO87_nSDCS3		MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
-#define GPIO88_RDnWR		MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
-
-/* USB */
-#define GPIO9_USB_RCV		MFP_CFG_IN(GPIO9, AF1)
-#define GPIO32_USB_VP		MFP_CFG_IN(GPIO32, AF2)
-#define GPIO34_USB_VM		MFP_CFG_IN(GPIO34, AF2)
-#define GPIO39_USB_VPO		MFP_CFG_OUT(GPIO39, AF3, DRIVE_LOW)
-#define GPIO56_USB_VMO		MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
-#define GPIO57_USB_nOE		MFP_CFG_OUT(GPIO57, AF1, DRIVE_HIGH)
-
-/* ASSP */
-#define GPIO28_ASSP_BITCLK_IN	MFP_CFG_IN(GPIO28, AF3)
-#define GPIO28_ASSP_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF3, DRIVE_LOW)
-#define GPIO29_ASSP_RXD		MFP_CFG_IN(GPIO29, AF3)
-#define GPIO30_ASSP_TXD		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
-#define GPIO31_ASSP_SFRM_IN	MFP_CFG_IN(GPIO31, AF1)
-#define GPIO31_ASSP_SFRM_OUT	MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-
-/* AC97 */
-#define GPIO89_AC97_nRESET	MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
-#endif	/* CONFIG_CPU_PXA26x */
-
 /* commonly used pin configurations */
 #define GPIOxx_LCD_16BPP	\
 	GPIO58_LCD_LDD_0,	\
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 6a5451b186c2..b556452dfcf9 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -16,8 +16,9 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/syscore_ops.h>
+#include <linux/soc/pxa/cpu.h>
 
-#include <mach/pxa2xx-regs.h>
+#include "pxa2xx-regs.h"
 #include "mfp-pxa2xx.h"
 
 #include "generic.h"
@@ -225,11 +226,7 @@ static void __init pxa25x_mfp_init(void)
 	int i;
 
 	/* running before pxa_gpio_probe() */
-#ifdef CONFIG_CPU_PXA26x
-	pxa_last_gpio = 89;
-#else
 	pxa_last_gpio = 84;
-#endif
 	for (i = 0; i <= pxa_last_gpio; i++)
 		gpio_desc[i].valid = 1;
 
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.h b/arch/arm/mach-pxa/mfp-pxa2xx.h
index 980145e7ee99..683a3ea5f154 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.h
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_ARCH_MFP_PXA2XX_H
 #define __ASM_ARCH_MFP_PXA2XX_H
 
-#include <plat/mfp.h>
+#include <linux/soc/pxa/mfp.h>
 
 /*
  * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index 56114df9700d..d16ab7451efe 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -16,9 +16,8 @@
 #include <linux/io.h>
 #include <linux/syscore_ops.h>
 
-#include <mach/hardware.h>
 #include "mfp-pxa3xx.h"
-#include <mach/pxa3xx-regs.h>
+#include "pxa3xx-regs.h"
 
 #ifdef CONFIG_PM
 /*
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.h b/arch/arm/mach-pxa/mfp-pxa3xx.h
index cdd830926d1c..81fec4fa5a0f 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.h
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_ARCH_MFP_PXA3XX_H
 #define __ASM_ARCH_MFP_PXA3XX_H
 
-#include <plat/mfp.h>
+#include <linux/soc/pxa/mfp.h>
 
 #define MFPR_BASE	(0x40e10000)
 
diff --git a/arch/arm/mach-pxa/mfp-pxa930.h b/arch/arm/mach-pxa/mfp-pxa930.h
deleted file mode 100644
index 0d195d3a8c61..000000000000
--- a/arch/arm/mach-pxa/mfp-pxa930.h
+++ /dev/null
@@ -1,495 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-pxa/include/mach/mfp-pxa930.h
- *
- * PXA930 specific MFP configuration definitions
- *
- * Copyright (C) 2007-2008 Marvell International Ltd.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA9xx_H
-#define __ASM_ARCH_MFP_PXA9xx_H
-
-#include "mfp-pxa3xx.h"
-
-/* GPIO */
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
-#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
-#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
-
-#define GSIM_UCLK_GPIO_79	MFP_CFG(GSIM_UCLK, AF0)
-#define GSIM_UIO_GPIO_80	MFP_CFG(GSIM_UIO, AF0)
-#define GSIM_nURST_GPIO_81	MFP_CFG(GSIM_nURST, AF0)
-#define GSIM_UDET_GPIO_82	MFP_CFG(GSIM_UDET, AF0)
-
-#define DF_IO15_GPIO_28		MFP_CFG(DF_IO15, AF0)
-#define DF_IO14_GPIO_29		MFP_CFG(DF_IO14, AF0)
-#define DF_IO13_GPIO_30		MFP_CFG(DF_IO13, AF0)
-#define DF_IO12_GPIO_31		MFP_CFG(DF_IO12, AF0)
-#define DF_IO11_GPIO_32		MFP_CFG(DF_IO11, AF0)
-#define DF_IO10_GPIO_33		MFP_CFG(DF_IO10, AF0)
-#define DF_IO9_GPIO_34		MFP_CFG(DF_IO9, AF0)
-#define DF_IO8_GPIO_35		MFP_CFG(DF_IO8, AF0)
-#define DF_IO7_GPIO_36		MFP_CFG(DF_IO7, AF0)
-#define DF_IO6_GPIO_37		MFP_CFG(DF_IO6, AF0)
-#define DF_IO5_GPIO_38		MFP_CFG(DF_IO5, AF0)
-#define DF_IO4_GPIO_39		MFP_CFG(DF_IO4, AF0)
-#define DF_IO3_GPIO_40		MFP_CFG(DF_IO3, AF0)
-#define DF_IO2_GPIO_41		MFP_CFG(DF_IO2, AF0)
-#define DF_IO1_GPIO_42		MFP_CFG(DF_IO1, AF0)
-#define DF_IO0_GPIO_43		MFP_CFG(DF_IO0, AF0)
-#define DF_nCS0_GPIO_44		MFP_CFG(DF_nCS0, AF0)
-#define DF_nCS1_GPIO_45		MFP_CFG(DF_nCS1, AF0)
-#define DF_nWE_GPIO_46		MFP_CFG(DF_nWE, AF0)
-#define DF_nRE_nOE_GPIO_47	MFP_CFG(DF_nRE_nOE, AF0)
-#define DF_CLE_nOE_GPIO_48	MFP_CFG(DF_CLE_nOE, AF0)
-#define DF_nADV1_ALE_GPIO_49	MFP_CFG(DF_nADV1_ALE, AF0)
-#define DF_nADV2_ALE_GPIO_50	MFP_CFG(DF_nADV2_ALE, AF0)
-#define DF_INT_RnB_GPIO_51	MFP_CFG(DF_INT_RnB, AF0)
-#define DF_SCLK_E_GPIO_52	MFP_CFG(DF_SCLK_E, AF0)
-
-#define DF_ADDR0_GPIO_53	MFP_CFG(DF_ADDR0, AF0)
-#define DF_ADDR1_GPIO_54	MFP_CFG(DF_ADDR1, AF0)
-#define DF_ADDR2_GPIO_55	MFP_CFG(DF_ADDR2, AF0)
-#define DF_ADDR3_GPIO_56	MFP_CFG(DF_ADDR3, AF0)
-#define nXCVREN_GPIO_57		MFP_CFG(nXCVREN, AF0)
-#define nLUA_GPIO_58		MFP_CFG(nLUA, AF0)
-#define nLLA_GPIO_59		MFP_CFG(nLLA, AF0)
-#define nBE0_GPIO_60		MFP_CFG(nBE0, AF0)
-#define nBE1_GPIO_61		MFP_CFG(nBE1, AF0)
-#define RDY_GPIO_62		MFP_CFG(RDY, AF0)
-#define PMIC_INT_GPIO83		MFP_CFG_LPM(PMIC_INT, AF0, PULL_HIGH)
-
-/* Chip Select */
-#define DF_nCS0_nCS2		MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
-#define DF_nCS1_nCS3		MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH)
-
-/* AC97 */
-#define GPIO83_BAC97_SYSCLK	MFP_CFG(GPIO83, AF3)
-#define GPIO84_BAC97_SDATA_IN0	MFP_CFG(GPIO84, AF3)
-#define GPIO85_BAC97_BITCLK	MFP_CFG(GPIO85, AF3)
-#define GPIO86_BAC97_nRESET	MFP_CFG(GPIO86, AF3)
-#define GPIO87_BAC97_SYNC	MFP_CFG(GPIO87, AF3)
-#define GPIO88_BAC97_SDATA_OUT	MFP_CFG(GPIO88, AF3)
-
-/* I2C */
-#define GPIO39_CI2C_SCL		MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
-#define GPIO40_CI2C_SDA		MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH)
-
-#define GPIO51_CI2C_SCL		MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH)
-#define GPIO52_CI2C_SDA		MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH)
-
-#define GPIO63_CI2C_SCL		MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
-#define GPIO64_CI2C_SDA		MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
-
-#define GPIO73_CI2C_SCL		MFP_CFG_LPM(GPIO73, AF1, PULL_HIGH)
-#define GPIO74_CI2C_SDA		MFP_CFG_LPM(GPIO74, AF1, PULL_HIGH)
-
-#define GPIO77_CI2C_SCL		MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
-#define GPIO78_CI2C_SDA		MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
-
-#define GPIO89_CI2C_SCL		MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH)
-#define GPIO90_CI2C_SDA		MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH)
-
-#define GPIO95_CI2C_SCL		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_CI2C_SDA		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-
-#define GPIO97_CI2C_SCL		MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH)
-#define GPIO98_CI2C_SDA		MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH)
-
-/* QCI */
-#define GPIO63_CI_DD_9		MFP_CFG_LPM(GPIO63, AF1, PULL_LOW)
-#define GPIO64_CI_DD_8		MFP_CFG_LPM(GPIO64, AF1, PULL_LOW)
-#define GPIO65_CI_DD_7		MFP_CFG_LPM(GPIO65, AF1, PULL_LOW)
-#define GPIO66_CI_DD_6		MFP_CFG_LPM(GPIO66, AF1, PULL_LOW)
-#define GPIO67_CI_DD_5		MFP_CFG_LPM(GPIO67, AF1, PULL_LOW)
-#define GPIO68_CI_DD_4		MFP_CFG_LPM(GPIO68, AF1, PULL_LOW)
-#define GPIO69_CI_DD_3		MFP_CFG_LPM(GPIO69, AF1, PULL_LOW)
-#define GPIO70_CI_DD_2		MFP_CFG_LPM(GPIO70, AF1, PULL_LOW)
-#define GPIO71_CI_DD_1		MFP_CFG_LPM(GPIO71, AF1, PULL_LOW)
-#define GPIO72_CI_DD_0		MFP_CFG_LPM(GPIO72, AF1, PULL_LOW)
-#define GPIO73_CI_HSYNC		MFP_CFG_LPM(GPIO73, AF1, PULL_LOW)
-#define GPIO74_CI_VSYNC		MFP_CFG_LPM(GPIO74, AF1, PULL_LOW)
-#define GPIO75_CI_MCLK		MFP_CFG_LPM(GPIO75, AF1, PULL_LOW)
-#define GPIO76_CI_PCLK		MFP_CFG_LPM(GPIO76, AF1, PULL_LOW)
-
-/* KEYPAD */
-#define GPIO4_KP_DKIN_4		MFP_CFG_LPM(GPIO4, AF3, FLOAT)
-#define GPIO5_KP_DKIN_5		MFP_CFG_LPM(GPIO5, AF3, FLOAT)
-#define GPIO6_KP_DKIN_6		MFP_CFG_LPM(GPIO6, AF3, FLOAT)
-#define GPIO7_KP_DKIN_7		MFP_CFG_LPM(GPIO7, AF3, FLOAT)
-#define GPIO8_KP_DKIN_4		MFP_CFG_LPM(GPIO8, AF3, FLOAT)
-#define GPIO9_KP_DKIN_5		MFP_CFG_LPM(GPIO9, AF3, FLOAT)
-#define GPIO10_KP_DKIN_6	MFP_CFG_LPM(GPIO10, AF3, FLOAT)
-#define GPIO11_KP_DKIN_7	MFP_CFG_LPM(GPIO11, AF3, FLOAT)
-
-#define GPIO12_KP_DKIN_0	MFP_CFG_LPM(GPIO12, AF2, FLOAT)
-#define GPIO13_KP_DKIN_1	MFP_CFG_LPM(GPIO13, AF2, FLOAT)
-#define GPIO14_KP_DKIN_2	MFP_CFG_LPM(GPIO14, AF2, FLOAT)
-#define GPIO15_KP_DKIN_3	MFP_CFG_LPM(GPIO15, AF2, FLOAT)
-
-#define GPIO41_KP_DKIN_0	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
-#define GPIO42_KP_DKIN_1	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
-#define GPIO43_KP_DKIN_2	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
-#define GPIO44_KP_DKIN_3	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
-#define GPIO41_KP_DKIN_4	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
-#define GPIO42_KP_DKIN_5	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
-
-#define GPIO0_KP_MKIN_0		MFP_CFG_LPM(GPIO0, AF1, FLOAT)
-#define GPIO2_KP_MKIN_1		MFP_CFG_LPM(GPIO2, AF1, FLOAT)
-#define GPIO4_KP_MKIN_2		MFP_CFG_LPM(GPIO4, AF1, FLOAT)
-#define GPIO6_KP_MKIN_3		MFP_CFG_LPM(GPIO6, AF1, FLOAT)
-#define GPIO8_KP_MKIN_4		MFP_CFG_LPM(GPIO8, AF1, FLOAT)
-#define GPIO10_KP_MKIN_5	MFP_CFG_LPM(GPIO10, AF1, FLOAT)
-#define GPIO12_KP_MKIN_6	MFP_CFG_LPM(GPIO12, AF1, FLOAT)
-#define GPIO14_KP_MKIN_7	MFP_CFG(GPIO14, AF1)
-#define GPIO35_KP_MKIN_5	MFP_CFG(GPIO35, AF4)
-
-#define GPIO1_KP_MKOUT_0	MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH)
-#define GPIO3_KP_MKOUT_1	MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH)
-#define GPIO5_KP_MKOUT_2	MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH)
-#define GPIO7_KP_MKOUT_3	MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
-#define GPIO9_KP_MKOUT_4	MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH)
-#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_6	MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH)
-#define GPIO15_KP_MKOUT_7	MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH)
-#define GPIO36_KP_MKOUT_5	MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO17_LCD_FCLK_RD	MFP_CFG(GPIO17, AF1)
-#define GPIO18_LCD_LCLK_A0	MFP_CFG(GPIO18, AF1)
-#define GPIO19_LCD_PCLK_WR	MFP_CFG(GPIO19, AF1)
-#define GPIO20_LCD_BIAS		MFP_CFG(GPIO20, AF1)
-#define GPIO21_LCD_CS		MFP_CFG(GPIO21, AF1)
-#define GPIO22_LCD_CS2		MFP_CFG(GPIO22, AF2)
-#define GPIO22_LCD_VSYNC	MFP_CFG(GPIO22, AF1)
-#define GPIO23_LCD_DD0		MFP_CFG(GPIO23, AF1)
-#define GPIO24_LCD_DD1		MFP_CFG(GPIO24, AF1)
-#define GPIO25_LCD_DD2		MFP_CFG(GPIO25, AF1)
-#define GPIO26_LCD_DD3		MFP_CFG(GPIO26, AF1)
-#define GPIO27_LCD_DD4		MFP_CFG(GPIO27, AF1)
-#define GPIO28_LCD_DD5		MFP_CFG(GPIO28, AF1)
-#define GPIO29_LCD_DD6		MFP_CFG(GPIO29, AF1)
-#define GPIO30_LCD_DD7		MFP_CFG(GPIO30, AF1)
-#define GPIO31_LCD_DD8		MFP_CFG(GPIO31, AF1)
-#define GPIO32_LCD_DD9		MFP_CFG(GPIO32, AF1)
-#define GPIO33_LCD_DD10		MFP_CFG(GPIO33, AF1)
-#define GPIO34_LCD_DD11		MFP_CFG(GPIO34, AF1)
-#define GPIO35_LCD_DD12		MFP_CFG(GPIO35, AF1)
-#define GPIO36_LCD_DD13		MFP_CFG(GPIO36, AF1)
-#define GPIO37_LCD_DD14		MFP_CFG(GPIO37, AF1)
-#define GPIO38_LCD_DD15		MFP_CFG(GPIO38, AF1)
-#define GPIO39_LCD_DD16		MFP_CFG(GPIO39, AF1)
-#define GPIO40_LCD_DD17		MFP_CFG(GPIO40, AF1)
-#define GPIO41_LCD_CS2		MFP_CFG(GPIO41, AF3)
-#define GPIO42_LCD_VSYNC2	MFP_CFG(GPIO42, AF3)
-#define GPIO44_LCD_DD7		MFP_CFG(GPIO44, AF1)
-
-/* Mini-LCD */
-#define GPIO17_MLCD_FCLK	MFP_CFG(GPIO17, AF3)
-#define GPIO18_MLCD_LCLK	MFP_CFG(GPIO18, AF3)
-#define GPIO19_MLCD_PCLK	MFP_CFG(GPIO19, AF3)
-#define GPIO20_MLCD_BIAS	MFP_CFG(GPIO20, AF3)
-#define GPIO23_MLCD_DD0		MFP_CFG(GPIO23, AF3)
-#define GPIO24_MLCD_DD1		MFP_CFG(GPIO24, AF3)
-#define GPIO25_MLCD_DD2		MFP_CFG(GPIO25, AF3)
-#define GPIO26_MLCD_DD3		MFP_CFG(GPIO26, AF3)
-#define GPIO27_MLCD_DD4		MFP_CFG(GPIO27, AF3)
-#define GPIO28_MLCD_DD5		MFP_CFG(GPIO28, AF3)
-#define GPIO29_MLCD_DD6		MFP_CFG(GPIO29, AF3)
-#define GPIO30_MLCD_DD7		MFP_CFG(GPIO30, AF3)
-#define GPIO31_MLCD_DD8		MFP_CFG(GPIO31, AF3)
-#define GPIO32_MLCD_DD9		MFP_CFG(GPIO32, AF3)
-#define GPIO33_MLCD_DD10	MFP_CFG(GPIO33, AF3)
-#define GPIO34_MLCD_DD11	MFP_CFG(GPIO34, AF3)
-#define GPIO35_MLCD_DD12	MFP_CFG(GPIO35, AF3)
-#define GPIO36_MLCD_DD13	MFP_CFG(GPIO36, AF3)
-#define GPIO37_MLCD_DD14	MFP_CFG(GPIO37, AF3)
-#define GPIO38_MLCD_DD15	MFP_CFG(GPIO38, AF3)
-#define GPIO44_MLCD_DD7		MFP_CFG(GPIO44, AF5)
-
-/* MMC1 */
-#define GPIO10_MMC1_DAT3	MFP_CFG(GPIO10, AF4)
-#define GPIO11_MMC1_DAT2	MFP_CFG(GPIO11, AF4)
-#define GPIO12_MMC1_DAT1	MFP_CFG(GPIO12, AF4)
-#define GPIO13_MMC1_DAT0	MFP_CFG(GPIO13, AF4)
-#define GPIO14_MMC1_CMD		MFP_CFG(GPIO14, AF4)
-#define GPIO15_MMC1_CLK		MFP_CFG(GPIO15, AF4)
-#define GPIO55_MMC1_CMD		MFP_CFG(GPIO55, AF3)
-#define GPIO56_MMC1_CLK		MFP_CFG(GPIO56, AF3)
-#define GPIO57_MMC1_DAT0	MFP_CFG(GPIO57, AF3)
-#define GPIO58_MMC1_DAT1	MFP_CFG(GPIO58, AF3)
-#define GPIO59_MMC1_DAT2	MFP_CFG(GPIO59, AF3)
-#define GPIO60_MMC1_DAT3	MFP_CFG(GPIO60, AF3)
-
-#define DF_ADDR0_MMC1_CLK	MFP_CFG(DF_ADDR0, AF2)
-#define DF_ADDR1_MMC1_CMD	MFP_CFG(DF_ADDR1, AF2)
-#define DF_ADDR2_MMC1_DAT0	MFP_CFG(DF_ADDR2, AF2)
-#define DF_ADDR3_MMC1_DAT1	MFP_CFG(DF_ADDR3, AF3)
-#define nXCVREN_MMC1_DAT2	MFP_CFG(nXCVREN, AF2)
-
-/* MMC2 */
-#define GPIO31_MMC2_CMD		MFP_CFG(GPIO31, AF7)
-#define GPIO32_MMC2_CLK		MFP_CFG(GPIO32, AF7)
-#define GPIO33_MMC2_DAT0	MFP_CFG(GPIO33, AF7)
-#define GPIO34_MMC2_DAT1	MFP_CFG(GPIO34, AF7)
-#define GPIO35_MMC2_DAT2	MFP_CFG(GPIO35, AF7)
-#define GPIO36_MMC2_DAT3	MFP_CFG(GPIO36, AF7)
-
-#define GPIO101_MMC2_DAT3	MFP_CFG(GPIO101, AF1)
-#define GPIO102_MMC2_DAT2	MFP_CFG(GPIO102, AF1)
-#define GPIO103_MMC2_DAT1	MFP_CFG(GPIO103, AF1)
-#define GPIO104_MMC2_DAT0	MFP_CFG(GPIO104, AF1)
-#define GPIO105_MMC2_CMD	MFP_CFG(GPIO105, AF1)
-#define GPIO106_MMC2_CLK	MFP_CFG(GPIO106, AF1)
-
-#define DF_IO10_MMC2_DAT3	MFP_CFG(DF_IO10, AF3)
-#define DF_IO11_MMC2_DAT2	MFP_CFG(DF_IO11, AF3)
-#define DF_IO12_MMC2_DAT1	MFP_CFG(DF_IO12, AF3)
-#define DF_IO13_MMC2_DAT0	MFP_CFG(DF_IO13, AF3)
-#define DF_IO14_MMC2_CLK	MFP_CFG(DF_IO14, AF3)
-#define DF_IO15_MMC2_CMD	MFP_CFG(DF_IO15, AF3)
-
-/* BSSP1 */
-#define GPIO12_BSSP1_CLK	MFP_CFG(GPIO12, AF3)
-#define GPIO13_BSSP1_FRM	MFP_CFG(GPIO13, AF3)
-#define GPIO14_BSSP1_RXD	MFP_CFG(GPIO14, AF3)
-#define GPIO15_BSSP1_TXD	MFP_CFG(GPIO15, AF3)
-#define GPIO97_BSSP1_CLK	MFP_CFG(GPIO97, AF5)
-#define GPIO98_BSSP1_FRM	MFP_CFG(GPIO98, AF5)
-
-/* BSSP2 */
-#define GPIO84_BSSP2_SDATA_IN	MFP_CFG(GPIO84, AF1)
-#define GPIO85_BSSP2_BITCLK	MFP_CFG(GPIO85, AF1)
-#define GPIO86_BSSP2_SYSCLK	MFP_CFG(GPIO86, AF1)
-#define GPIO87_BSSP2_SYNC	MFP_CFG(GPIO87, AF1)
-#define GPIO88_BSSP2_DATA_OUT	MFP_CFG(GPIO88, AF1)
-#define GPIO86_BSSP2_SDATA_IN	MFP_CFG(GPIO86, AF4)
-
-/* BSSP3 */
-#define GPIO79_BSSP3_CLK	MFP_CFG(GPIO79, AF1)
-#define GPIO80_BSSP3_FRM	MFP_CFG(GPIO80, AF1)
-#define GPIO81_BSSP3_TXD	MFP_CFG(GPIO81, AF1)
-#define GPIO82_BSSP3_RXD	MFP_CFG(GPIO82, AF1)
-#define GPIO83_BSSP3_SYSCLK	MFP_CFG(GPIO83, AF1)
-
-/* BSSP4 */
-#define GPIO43_BSSP4_CLK	MFP_CFG(GPIO43, AF4)
-#define GPIO44_BSSP4_FRM	MFP_CFG(GPIO44, AF4)
-#define GPIO45_BSSP4_TXD	MFP_CFG(GPIO45, AF4)
-#define GPIO46_BSSP4_RXD	MFP_CFG(GPIO46, AF4)
-
-#define GPIO51_BSSP4_CLK	MFP_CFG(GPIO51, AF4)
-#define GPIO52_BSSP4_FRM	MFP_CFG(GPIO52, AF4)
-#define GPIO53_BSSP4_TXD	MFP_CFG(GPIO53, AF4)
-#define GPIO54_BSSP4_RXD	MFP_CFG(GPIO54, AF4)
-
-/* GSSP1 */
-#define GPIO79_GSSP1_CLK	MFP_CFG(GPIO79, AF2)
-#define GPIO80_GSSP1_FRM	MFP_CFG(GPIO80, AF2)
-#define GPIO81_GSSP1_TXD	MFP_CFG(GPIO81, AF2)
-#define GPIO82_GSSP1_RXD	MFP_CFG(GPIO82, AF2)
-#define GPIO83_GSSP1_SYSCLK	MFP_CFG(GPIO83, AF2)
-
-#define GPIO93_GSSP1_CLK	MFP_CFG(GPIO93, AF4)
-#define GPIO94_GSSP1_FRM	MFP_CFG(GPIO94, AF4)
-#define GPIO95_GSSP1_TXD	MFP_CFG(GPIO95, AF4)
-#define GPIO96_GSSP1_RXD	MFP_CFG(GPIO96, AF4)
-
-/* GSSP2 */
-#define GPIO47_GSSP2_CLK	MFP_CFG(GPIO47, AF4)
-#define GPIO48_GSSP2_FRM	MFP_CFG(GPIO48, AF4)
-#define GPIO49_GSSP2_RXD	MFP_CFG(GPIO49, AF4)
-#define GPIO50_GSSP2_TXD	MFP_CFG(GPIO50, AF4)
-
-#define GPIO69_GSSP2_CLK	MFP_CFG(GPIO69, AF4)
-#define GPIO70_GSSP2_FRM	MFP_CFG(GPIO70, AF4)
-#define GPIO71_GSSP2_RXD	MFP_CFG(GPIO71, AF4)
-#define GPIO72_GSSP2_TXD	MFP_CFG(GPIO72, AF4)
-
-#define GPIO84_GSSP2_RXD	MFP_CFG(GPIO84, AF2)
-#define GPIO85_GSSP2_CLK	MFP_CFG(GPIO85, AF2)
-#define GPIO86_GSSP2_SYSCLK	MFP_CFG(GPIO86, AF2)
-#define GPIO87_GSSP2_FRM	MFP_CFG(GPIO87, AF2)
-#define GPIO88_GSSP2_TXD	MFP_CFG(GPIO88, AF2)
-#define GPIO86_GSSP2_RXD	MFP_CFG(GPIO86, AF5)
-
-#define GPIO103_GSSP2_CLK	MFP_CFG(GPIO103, AF2)
-#define GPIO104_GSSP2_FRM	MFP_CFG(GPIO104, AF2)
-#define GPIO105_GSSP2_RXD	MFP_CFG(GPIO105, AF2)
-#define GPIO106_GSSP2_TXD	MFP_CFG(GPIO106, AF2)
-
-/* UART1 - FFUART */
-#define GPIO47_UART1_DSR_N	MFP_CFG(GPIO47, AF1)
-#define GPIO48_UART1_DTR_N	MFP_CFG(GPIO48, AF1)
-#define GPIO49_UART1_RI		MFP_CFG(GPIO49, AF1)
-#define GPIO50_UART1_DCD	MFP_CFG(GPIO50, AF1)
-#define GPIO51_UART1_CTS	MFP_CFG(GPIO51, AF1)
-#define GPIO52_UART1_RTS	MFP_CFG(GPIO52, AF1)
-#define GPIO53_UART1_RXD	MFP_CFG(GPIO53, AF1)
-#define GPIO54_UART1_TXD	MFP_CFG(GPIO54, AF1)
-
-#define GPIO63_UART1_TXD	MFP_CFG(GPIO63, AF2)
-#define GPIO64_UART1_RXD	MFP_CFG(GPIO64, AF2)
-#define GPIO65_UART1_DSR	MFP_CFG(GPIO65, AF2)
-#define GPIO66_UART1_DTR	MFP_CFG(GPIO66, AF2)
-#define GPIO67_UART1_RI		MFP_CFG(GPIO67, AF2)
-#define GPIO68_UART1_DCD	MFP_CFG(GPIO68, AF2)
-#define GPIO69_UART1_CTS	MFP_CFG(GPIO69, AF2)
-#define GPIO70_UART1_RTS	MFP_CFG(GPIO70, AF2)
-
-#define GPIO53_UART1_TXD	MFP_CFG(GPIO53, AF2)
-#define GPIO54_UART1_RXD	MFP_CFG(GPIO54, AF2)
-
-/* UART2 - BTUART */
-#define GPIO91_UART2_RXD	MFP_CFG(GPIO91, AF1)
-#define GPIO92_UART2_TXD	MFP_CFG(GPIO92, AF1)
-#define GPIO93_UART2_CTS	MFP_CFG(GPIO93, AF1)
-#define GPIO94_UART2_RTS	MFP_CFG(GPIO94, AF1)
-
-/* UART3 - STUART */
-#define GPIO43_UART3_RTS	MFP_CFG(GPIO43, AF3)
-#define GPIO44_UART3_CTS	MFP_CFG(GPIO44, AF3)
-#define GPIO45_UART3_RXD	MFP_CFG(GPIO45, AF3)
-#define GPIO46_UART3_TXD	MFP_CFG(GPIO46, AF3)
-
-#define GPIO75_UART3_RTS	MFP_CFG(GPIO75, AF5)
-#define GPIO76_UART3_CTS	MFP_CFG(GPIO76, AF5)
-#define GPIO77_UART3_TXD	MFP_CFG(GPIO77, AF5)
-#define GPIO78_UART3_RXD	MFP_CFG(GPIO78, AF5)
-
-/* DFI */
-#define DF_IO0_DF_IO0		MFP_CFG(DF_IO0, AF2)
-#define DF_IO1_DF_IO1		MFP_CFG(DF_IO1, AF2)
-#define DF_IO2_DF_IO2		MFP_CFG(DF_IO2, AF2)
-#define DF_IO3_DF_IO3		MFP_CFG(DF_IO3, AF2)
-#define DF_IO4_DF_IO4		MFP_CFG(DF_IO4, AF2)
-#define DF_IO5_DF_IO5		MFP_CFG(DF_IO5, AF2)
-#define DF_IO6_DF_IO6		MFP_CFG(DF_IO6, AF2)
-#define DF_IO7_DF_IO7		MFP_CFG(DF_IO7, AF2)
-#define DF_IO8_DF_IO8		MFP_CFG(DF_IO8, AF2)
-#define DF_IO9_DF_IO9		MFP_CFG(DF_IO9, AF2)
-#define DF_IO10_DF_IO10		MFP_CFG(DF_IO10, AF2)
-#define DF_IO11_DF_IO11		MFP_CFG(DF_IO11, AF2)
-#define DF_IO12_DF_IO12		MFP_CFG(DF_IO12, AF2)
-#define DF_IO13_DF_IO13		MFP_CFG(DF_IO13, AF2)
-#define DF_IO14_DF_IO14		MFP_CFG(DF_IO14, AF2)
-#define DF_IO15_DF_IO15		MFP_CFG(DF_IO15, AF2)
-#define DF_nADV1_ALE_DF_nADV1	MFP_CFG(DF_nADV1_ALE, AF2)
-#define DF_nADV2_ALE_DF_nADV2	MFP_CFG(DF_nADV2_ALE, AF2)
-#define DF_nCS0_DF_nCS0		MFP_CFG(DF_nCS0, AF2)
-#define DF_nCS1_DF_nCS1		MFP_CFG(DF_nCS1, AF2)
-#define DF_nRE_nOE_DF_nOE	MFP_CFG(DF_nRE_nOE, AF2)
-#define DF_nWE_DF_nWE		MFP_CFG(DF_nWE, AF2)
-
-/* DFI - NAND */
-#define DF_CLE_nOE_ND_CLE	MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH)
-#define DF_INT_RnB_ND_INT_RnB	MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW)
-#define DF_IO0_ND_IO0		MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW)
-#define DF_IO1_ND_IO1		MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW)
-#define DF_IO2_ND_IO2		MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW)
-#define DF_IO3_ND_IO3		MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW)
-#define DF_IO4_ND_IO4		MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW)
-#define DF_IO5_ND_IO5		MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW)
-#define DF_IO6_ND_IO6		MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW)
-#define DF_IO7_ND_IO7		MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW)
-#define DF_IO8_ND_IO8		MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW)
-#define DF_IO9_ND_IO9		MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW)
-#define DF_IO10_ND_IO10		MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW)
-#define DF_IO11_ND_IO11		MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW)
-#define DF_IO12_ND_IO12		MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW)
-#define DF_IO13_ND_IO13		MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW)
-#define DF_IO14_ND_IO14		MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW)
-#define DF_IO15_ND_IO15		MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW)
-#define DF_nADV1_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH)
-#define DF_nADV2_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH)
-#define	DF_nADV2_ALE_nCS3	MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH)
-#define DF_nCS0_ND_nCS0		MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH)
-#define DF_nCS1_ND_nCS1		MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH)
-#define DF_nRE_nOE_ND_nRE	MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH)
-#define DF_nWE_ND_nWE		MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH)
-
-/* PWM */
-#define GPIO41_PWM0		MFP_CFG_LPM(GPIO41, AF1, PULL_LOW)
-#define GPIO42_PWM1		MFP_CFG_LPM(GPIO42, AF1, PULL_LOW)
-#define GPIO43_PWM3		MFP_CFG_LPM(GPIO43, AF1, PULL_LOW)
-#define GPIO20_PWM0		MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
-#define GPIO21_PWM2		MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
-#define GPIO22_PWM3		MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
-#define GPIO32_PWM0		MFP_CFG_LPM(GPIO32, AF4, PULL_LOW)
-
-/* CIR */
-#define GPIO46_CIR_OUT		MFP_CFG(GPIO46, AF1)
-#define GPIO77_CIR_OUT		MFP_CFG(GPIO77, AF3)
-
-/* USB P2 */
-#define GPIO0_USB_P2_7		MFP_CFG(GPIO0, AF3)
-#define GPIO15_USB_P2_7		MFP_CFG(GPIO15, AF5)
-#define GPIO16_USB_P2_7		MFP_CFG(GPIO16, AF2)
-#define GPIO48_USB_P2_7		MFP_CFG(GPIO48, AF7)
-#define GPIO49_USB_P2_7		MFP_CFG(GPIO49, AF6)
-#define DF_IO9_USB_P2_7		MFP_CFG(DF_IO9, AF3)
-
-#define GPIO48_USB_P2_8		MFP_CFG(GPIO48, AF2)
-#define GPIO50_USB_P2_7		MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT)
-#define GPIO51_USB_P2_5		MFP_CFG(GPIO51, AF2)
-#define GPIO47_USB_P2_4		MFP_CFG(GPIO47, AF2)
-#define GPIO53_USB_P2_3		MFP_CFG(GPIO53, AF2)
-#define GPIO54_USB_P2_6		MFP_CFG(GPIO54, AF2)
-#define GPIO49_USB_P2_2		MFP_CFG(GPIO49, AF2)
-#define GPIO52_USB_P2_1		MFP_CFG(GPIO52, AF2)
-
-#define GPIO63_USB_P2_8		MFP_CFG(GPIO63, AF3)
-#define GPIO64_USB_P2_7		MFP_CFG(GPIO64, AF3)
-#define GPIO65_USB_P2_6		MFP_CFG(GPIO65, AF3)
-#define GPIO66_USG_P2_5		MFP_CFG(GPIO66, AF3)
-#define GPIO67_USB_P2_4		MFP_CFG(GPIO67, AF3)
-#define GPIO68_USB_P2_3		MFP_CFG(GPIO68, AF3)
-#define GPIO69_USB_P2_2		MFP_CFG(GPIO69, AF3)
-#define GPIO70_USB_P2_1		MFP_CFG(GPIO70, AF3)
-
-/* ULPI */
-#define GPIO31_USB_ULPI_D0	MFP_CFG(GPIO31, AF4)
-#define GPIO30_USB_ULPI_D1	MFP_CFG(GPIO30, AF7)
-#define GPIO33_USB_ULPI_D2	MFP_CFG(GPIO33, AF5)
-#define GPIO34_USB_ULPI_D3	MFP_CFG(GPIO34, AF5)
-#define GPIO35_USB_ULPI_D4	MFP_CFG(GPIO35, AF5)
-#define GPIO36_USB_ULPI_D5	MFP_CFG(GPIO36, AF5)
-#define GPIO41_USB_ULPI_D6	MFP_CFG(GPIO41, AF5)
-#define GPIO42_USB_ULPI_D7	MFP_CFG(GPIO42, AF5)
-#define GPIO37_USB_ULPI_DIR	MFP_CFG(GPIO37, AF4)
-#define GPIO38_USB_ULPI_CLK	MFP_CFG(GPIO38, AF4)
-#define GPIO39_USB_ULPI_STP	MFP_CFG(GPIO39, AF4)
-#define GPIO40_USB_ULPI_NXT	MFP_CFG(GPIO40, AF4)
-
-#define GPIO3_CLK26MOUTDMD	MFP_CFG(GPIO3, AF3)
-#define GPIO40_CLK26MOUTDMD	MFP_CFG(GPIO40, AF7)
-#define GPIO94_CLK26MOUTDMD	MFP_CFG(GPIO94, AF5)
-#define GPIO104_CLK26MOUTDMD	MFP_CFG(GPIO104, AF4)
-#define DF_ADDR1_CLK26MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
-#define DF_ADDR3_CLK26MOUTDMD	MFP_CFG(DF_ADDR3, AF3)
-
-#define GPIO14_CLK26MOUT	MFP_CFG(GPIO14, AF5)
-#define GPIO38_CLK26MOUT	MFP_CFG(GPIO38, AF7)
-#define GPIO92_CLK26MOUT	MFP_CFG(GPIO92, AF5)
-#define GPIO105_CLK26MOUT	MFP_CFG(GPIO105, AF4)
-
-#define GPIO2_CLK13MOUTDMD	MFP_CFG(GPIO2, AF3)
-#define GPIO39_CLK13MOUTDMD	MFP_CFG(GPIO39, AF7)
-#define GPIO50_CLK13MOUTDMD	MFP_CFG(GPIO50, AF3)
-#define GPIO93_CLK13MOUTDMD	MFP_CFG(GPIO93, AF5)
-#define GPIO103_CLK13MOUTDMD	MFP_CFG(GPIO103, AF4)
-#define DF_ADDR2_CLK13MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
-
-/* 1 wire */
-#define GPIO95_OW_DQ_IN		MFP_CFG(GPIO95, AF5)
-
-#endif /* __ASM_ARCH_MFP_PXA9xx_H */
diff --git a/arch/arm/mach-pxa/mfp.h b/arch/arm/mach-pxa/mfp.h
new file mode 100644
index 000000000000..7e0879bd4102
--- /dev/null
+++ b/arch/arm/mach-pxa/mfp.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm/mach-pxa/include/mach/mfp.h
+ *
+ * Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
+ *            initial version
+ */
+
+#ifndef __ASM_ARCH_MFP_H
+#define __ASM_ARCH_MFP_H
+
+#include <linux/soc/pxa/mfp.h>
+
+#endif /* __ASM_ARCH_MFP_H */
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
deleted file mode 100644
index a79f296e81e0..000000000000
--- a/arch/arm/mach-pxa/mioa701.c
+++ /dev/null
@@ -1,784 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Handles the Mitac Mio A701 Board
- *
- * Copyright (C) 2008 Robert Jarzmik
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/gpio_keys.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/rtc.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pda_power.h>
-#include <linux/power_supply.h>
-#include <linux/wm97xx.h>
-#include <linux/mtd/physmap.h>
-#include <linux/reboot.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/max1586.h>
-#include <linux/slab.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa27x.h"
-#include "regs-rtc.h"
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include "pxa27x-udc.h"
-#include <linux/platform_data/media/camera-pxa.h>
-#include <mach/audio.h>
-#include <mach/smemc.h>
-
-#include "mioa701.h"
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long mioa701_pin_config[] = {
-	/* Mio global */
-	MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
-	MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
-	MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
-	MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
-
-	/* Backlight PWM 0 */
-	GPIO16_PWM0_OUT,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
-	MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
-	MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
-
-	/* USB */
-	MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
-	MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* QCI */
-	GPIO12_CIF_DD_7,
-	GPIO17_CIF_DD_6,
-	GPIO50_CIF_DD_3,
-	GPIO51_CIF_DD_2,
-	GPIO52_CIF_DD_4,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO55_CIF_DD_1,
-	GPIO81_CIF_DD_0,
-	GPIO82_CIF_DD_5,
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-	MIO_CFG_OUT(GPIO56_MT9M111_nOE, AF0, DRIVE_LOW),
-
-	/* Bluetooth */
-	MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
-	GPIO44_BTUART_CTS,
-	GPIO42_BTUART_RXD,
-	GPIO45_BTUART_RTS,
-	GPIO43_BTUART_TXD,
-	MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
-
-	/* GPS */
-	MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* GSM */
-	MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
-	MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
-	MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* Sound */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
-
-	/* Leds */
-	MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
-
-	/* Keyboard */
-	MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
-	MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
-	MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
-	GPIO100_KP_MKIN_0,
-	GPIO101_KP_MKIN_1,
-	GPIO102_KP_MKIN_2,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* Unknown */
-	MFP_CFG_IN(GPIO20, AF0),
-	MFP_CFG_IN(GPIO21, AF0),
-	MFP_CFG_IN(GPIO33, AF0),
-	MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
-	MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
-	MFP_CFG_IN(GPIO96, AF0),
-	MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
-};
-
-static struct pwm_lookup mioa701_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 4000 * 1024,
-		   PWM_POLARITY_NORMAL),
-};
-
-/* LCD Screen and Backlight */
-static struct platform_pwm_backlight_data mioa701_backlight_data = {
-	.max_brightness	= 100,
-	.dft_brightness	= 50,
-};
-
-/*
- * LTM0305A776C LCD panel timings
- *
- * see:
- *  - the LTM0305A776C datasheet,
- *  - and the PXA27x Programmers' manual
- */
-static struct pxafb_mode_info mioa701_ltm0305a776c = {
-	.pixclock		= 220000,	/* CLK=4.545 MHz */
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 4,
-	.vsync_len		= 2,
-	.left_margin		= 6,
-	.right_margin		= 4,
-	.upper_margin		= 5,
-	.lower_margin		= 3,
-};
-
-static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	gpio_set_value(GPIO87_LCD_POWER, on);
-}
-
-static struct pxafb_mach_info mioa701_pxafb_info = {
-	.modes			= &mioa701_ltm0305a776c,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= mioa701_lcd_power,
-};
-
-/*
- * Keyboard configuration
- */
-static const unsigned int mioa701_matrix_keys[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_MEDIA),
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_ENTER),
-	KEY(1, 2, KEY_CONNECT),	/* GPS key */
-	KEY(2, 0, KEY_LEFT),
-	KEY(2, 1, KEY_PHONE),	/* Phone Green key */
-	KEY(2, 2, KEY_CAMERA)	/* Camera key */
-};
-
-static struct matrix_keymap_data mioa701_matrix_keymap_data = {
-	.keymap			= mioa701_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(mioa701_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
-	.matrix_key_rows = 3,
-	.matrix_key_cols = 3,
-	.matrix_keymap_data = &mioa701_matrix_keymap_data,
-};
-
-/*
- * GPIO Key Configuration
- */
-#define MIO_KEY(key, _gpio, _desc, _wakeup) \
-	{ .code = (key), .gpio = (_gpio), .active_low = 0, \
-	.desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) }
-static struct gpio_keys_button mioa701_button_table[] = {
-	MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1),
-	MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0),
-	MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0),
-	MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0)
-};
-
-static struct gpio_keys_platform_data mioa701_gpio_keys_data = {
-	.buttons  = mioa701_button_table,
-	.nbuttons = ARRAY_SIZE(mioa701_button_table),
-};
-
-/*
- * Leds and vibrator
- */
-#define ONE_LED(_gpio, _name) \
-{ .gpio = (_gpio), .name = (_name), .active_low = true }
-static struct gpio_led gpio_leds[] = {
-	ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"),
-	ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"),
-	ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"),
-	ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"),
-	ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard")
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds = gpio_leds,
-	.num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-/*
- * GSM Sagem XS200 chip
- *
- * GSM handling was purged from kernel. For history, this is the way to go :
- *   - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1
- *            GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1
- *   - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100),
- *             GPIO24_GSM_MOD_RESET_CMD = 0
- *   - turn on  : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000),
- *                GPIO88_GSM_nMOD_ON_CMD = 1
- *   - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000),
- *                GPIO90_GSM_nMOD_OFF_CMD = 1
- */
-static int is_gsm_on(void)
-{
-	int is_on;
-
-	is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE);
-	return is_on;
-}
-
-irqreturn_t gsm_on_irq(int irq, void *p)
-{
-	printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n",
-	       is_gsm_on() ? "on" : "off");
-	return IRQ_HANDLED;
-}
-
-static struct gpio gsm_gpios[] = {
-	{ GPIO25_GSM_MOD_ON_STATE, GPIOF_IN, "GSM state" },
-	{ GPIO113_GSM_EVENT, GPIOF_IN, "GSM event" },
-};
-
-static int __init gsm_init(void)
-{
-	int rc;
-
-	rc = gpio_request_array(ARRAY_AND_SIZE(gsm_gpios));
-	if (rc)
-		goto err_gpio;
-	rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
-			 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			 "GSM XS200 Power Irq", NULL);
-	if (rc)
-		goto err_irq;
-
-	gpio_set_wake(GPIO113_GSM_EVENT, 1);
-	return 0;
-
-err_irq:
-	printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
-	gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
-err_gpio:
-	printk(KERN_ERR "Mioa701: gsm not available\n");
-	return rc;
-}
-
-static void gsm_exit(void)
-{
-	free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
-	gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
-}
-
-/*
- * Bluetooth BRF6150 chip
- *
- * BT handling was purged from kernel. For history, this is the way to go :
- * - turn on  : GPIO83_BT_ON = 1
- * - turn off : GPIO83_BT_ON = 0
- */
-
-/*
- * GPS Sirf Star III chip
- *
- * GPS handling was purged from kernel. For history, this is the way to go :
- * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
- *          GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0
- * - turn on  : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1
- * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
- */
-
-/*
- * USB UDC
- */
-static int is_usb_connected(void)
-{
-	return !gpio_get_value(GPIO13_nUSB_DETECT);
-}
-
-static struct pxa2xx_udc_mach_info mioa701_udc_info = {
-	.udc_is_connected = is_usb_connected,
-	.gpio_pullup	  = GPIO22_USB_ENABLE,
-};
-
-static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO13_nUSB_DETECT,
-			    "vbus", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/*
- * SDIO/MMC Card controller
- */
-/**
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-static struct pxamci_platform_data mioa701_mci_info = {
-	.detect_delay_ms	= 250,
-	.ocr_mask 		= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table mioa701_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 15 */
-		GPIO_LOOKUP("gpio-pxa", GPIO15_SDIO_INSERT,
-			    "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 78 */
-		GPIO_LOOKUP("gpio-pxa", GPIO78_SDIO_RO,
-			    "wp", GPIO_ACTIVE_LOW),
-		/* Power on GPIO 91 */
-		GPIO_LOOKUP("gpio-pxa", GPIO91_SDIO_EN,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* FlashRAM */
-static struct resource docg3_resource = {
-	.start = PXA_CS0_PHYS,
-	.end   = PXA_CS0_PHYS + SZ_8K - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device docg3 = {
-	.name	       = "docg3",
-	.id	       = -1,
-	.resource      = &docg3_resource,
-	.num_resources = 1,
-	.dev = {
-		.platform_data = NULL,
-	},
-};
-
-/*
- * Suspend/Resume bootstrap management
- *
- * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled,
- * this sequence is as follows :
- *   - disables interrupts
- *   - initialize SDRAM (self refresh RAM into active RAM)
- *   - initialize GPIOs (depends on value at 0xa020b020)
- *   - initialize coprossessors
- *   - if edge detect on PWR_SCL(GPIO3), then proceed to cold start
- *   - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start
- *   - else do a resume, ie. jump to addr 0xa0100000
- */
-#define RESUME_ENABLE_ADDR	0xa020b000
-#define RESUME_ENABLE_VAL	0x0f0f0f0f
-#define RESUME_BT_ADDR		0xa020b020
-#define RESUME_UNKNOWN_ADDR	0xa020b024
-#define RESUME_VECTOR_ADDR	0xa0100000
-#define BOOTSTRAP_WORDS		mioa701_bootstrap_lg/4
-
-static u32 *save_buffer;
-
-static void install_bootstrap(void)
-{
-	int i;
-	u32 *rom_bootstrap  = phys_to_virt(RESUME_VECTOR_ADDR);
-	u32 *src = &mioa701_bootstrap;
-
-	for (i = 0; i < BOOTSTRAP_WORDS; i++)
-		rom_bootstrap[i] = src[i];
-}
-
-
-static int mioa701_sys_suspend(void)
-{
-	int i = 0, is_bt_on;
-	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
-	u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
-	u32 *mem_resume_bt	= phys_to_virt(RESUME_BT_ADDR);
-	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
-
-	/* Devices prepare suspend */
-	is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
-	pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
-			   is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
-
-	for (i = 0; i < BOOTSTRAP_WORDS; i++)
-		save_buffer[i] = mem_resume_vector[i];
-	save_buffer[i++] = *mem_resume_enabler;
-	save_buffer[i++] = *mem_resume_bt;
-	save_buffer[i++] = *mem_resume_unknown;
-
-	*mem_resume_enabler = RESUME_ENABLE_VAL;
-	*mem_resume_bt	    = is_bt_on;
-
-	install_bootstrap();
-	return 0;
-}
-
-static void mioa701_sys_resume(void)
-{
-	int i = 0;
-	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
-	u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
-	u32 *mem_resume_bt	= phys_to_virt(RESUME_BT_ADDR);
-	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
-
-	for (i = 0; i < BOOTSTRAP_WORDS; i++)
-		mem_resume_vector[i] = save_buffer[i];
-	*mem_resume_enabler = save_buffer[i++];
-	*mem_resume_bt	    = save_buffer[i++];
-	*mem_resume_unknown = save_buffer[i++];
-}
-
-static struct syscore_ops mioa701_syscore_ops = {
-	.suspend	= mioa701_sys_suspend,
-	.resume		= mioa701_sys_resume,
-};
-
-static int __init bootstrap_init(void)
-{
-	int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
-
-	register_syscore_ops(&mioa701_syscore_ops);
-
-	save_buffer = kmalloc(save_size, GFP_KERNEL);
-	if (!save_buffer)
-		return -ENOMEM;
-	printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n",
-	       save_size);
-	return 0;
-}
-
-static void bootstrap_exit(void)
-{
-	kfree(save_buffer);
-	unregister_syscore_ops(&mioa701_syscore_ops);
-
-	printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
-	       "resume !!!\n");
-}
-
-/*
- * Power Supply
- */
-static char *supplicants[] = {
-	"mioa701_battery"
-};
-
-static int is_ac_connected(void)
-{
-	return gpio_get_value(GPIO96_AC_DETECT);
-}
-
-static void mioa701_set_charge(int flags)
-{
-	gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB));
-}
-
-static struct pda_power_pdata power_pdata = {
-	.is_ac_online	= is_ac_connected,
-	.is_usb_online	= is_usb_connected,
-	.set_charge = mioa701_set_charge,
-	.supplied_to = supplicants,
-	.num_supplicants = ARRAY_SIZE(supplicants),
-};
-
-static struct resource power_resources[] = {
-	[0] = {
-		.name	= "ac",
-		.start	= PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
-		.end	= PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		IORESOURCE_IRQ_LOWEDGE,
-	},
-	[1] = {
-		.name	= "usb",
-		.start	= PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
-		.end	= PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device power_dev = {
-	.name		= "pda-power",
-	.id		= -1,
-	.resource	= power_resources,
-	.num_resources	= ARRAY_SIZE(power_resources),
-	.dev = {
-		.platform_data	= &power_pdata,
-	},
-};
-
-static struct wm97xx_batt_pdata mioa701_battery_data = {
-	.batt_aux	= WM97XX_AUX_ID1,
-	.temp_aux	= -1,
-	.min_voltage	= 0xc00,
-	.max_voltage	= 0xfc0,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LION,
-	.batt_div	= 1,
-	.batt_mult	= 1,
-	.batt_name	= "mioa701_battery",
-};
-
-static struct wm97xx_pdata mioa701_wm97xx_pdata = {
-	.batt_pdata	= &mioa701_battery_data,
-};
-
-/*
- * Voltage regulation
- */
-static struct regulator_consumer_supply max1586_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data max1586_v3_info = {
-	.constraints = {
-		.name = "vcc_core range",
-		.min_uV = 1000000,
-		.max_uV = 1705000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max1586_consumers),
-	.consumer_supplies = max1586_consumers,
-};
-
-static struct max1586_subdev_data max1586_subdevs[] = {
-	{ .name = "vcc_core", .id = MAX1586_V3,
-	  .platform_data = &max1586_v3_info },
-};
-
-static struct max1586_platform_data max1586_info = {
-	.subdevs = max1586_subdevs,
-	.num_subdevs = ARRAY_SIZE(max1586_subdevs),
-	.v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */
-};
-
-/*
- * Camera interface
- */
-struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
-	.mclk_10khz = 5000,
-	.sensor_i2c_adapter_id = 0,
-	.sensor_i2c_address = 0x5d,
-};
-
-static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data = &max1586_info,
-	},
-};
-
-/* Board I2C devices. */
-static struct i2c_board_info mioa701_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mt9m111", 0x5d),
-	},
-};
-
-struct i2c_pxa_platform_data i2c_pdata = {
-	.fast_mode = 1,
-};
-
-static pxa2xx_audio_ops_t mioa701_ac97_info = {
-	.reset_gpio = 95,
-	.codec_pdata = { &mioa701_wm97xx_pdata, },
-};
-
-/*
- * Mio global
- */
-
-/* Devices */
-#define MIO_PARENT_DEV(var, strname, tparent, pdata)	\
-static struct platform_device var = {			\
-	.name		= strname,			\
-	.id		= -1,				\
-	.dev		= {				\
-		.platform_data = pdata,			\
-		.parent	= tparent,			\
-	},						\
-};
-#define MIO_SIMPLE_DEV(var, strname, pdata)	\
-	MIO_PARENT_DEV(var, strname, NULL, pdata)
-
-MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys",	    &mioa701_gpio_keys_data)
-MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight",  &pxa27x_device_pwm0.dev,
-		&mioa701_backlight_data);
-MIO_SIMPLE_DEV(mioa701_led,	  "leds-gpio",	    &gpio_led_info)
-MIO_SIMPLE_DEV(pxa2xx_pcm,	  "pxa2xx-pcm",	    NULL)
-MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
-MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
-MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      NULL);
-
-static struct platform_device *devices[] __initdata = {
-	&mioa701_gpio_keys,
-	&mioa701_backlight,
-	&mioa701_led,
-	&pxa2xx_pcm,
-	&mioa701_sound,
-	&power_dev,
-	&docg3,
-	&gpio_vbus,
-	&mioa701_board,
-};
-
-static void mioa701_machine_exit(void);
-
-static void mioa701_poweroff(void)
-{
-	mioa701_machine_exit();
-	pxa_restart(REBOOT_SOFT, NULL);
-}
-
-static void mioa701_restart(enum reboot_mode c, const char *cmd)
-{
-	mioa701_machine_exit();
-	pxa_restart(REBOOT_SOFT, cmd);
-}
-
-static struct gpio global_gpios[] = {
-	{ GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" },
-	{ GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" },
-	{ GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" },
-	{ GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" },
-};
-
-static struct regulator_consumer_supply fixed_5v0_consumers[] = {
-	REGULATOR_SUPPLY("power", "pwm-backlight"),
-};
-
-static void __init mioa701_machine_init(void)
-{
-	int rc;
-
-	PSLR  = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
-	PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
-	RTTR = 32768 - 1; /* Reset crazy WinCE value */
-	UP2OCR = UP2OCR_HXOE;
-
-	/*
-	 * Set up the flash memory : DiskOnChip G3 on first static memory bank
-	 */
-	__raw_writel(0x7ff02dd8, MSC0);
-	__raw_writel(0x0001c391, MCMEM0);
-	__raw_writel(0x0001c391, MCATT0);
-	__raw_writel(0x0001c391, MCIO0);
-
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	rc = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
-	if (rc)
-		pr_err("MioA701: Failed to request GPIOs: %d", rc);
-	bootstrap_init();
-	pxa_set_fb_info(NULL, &mioa701_pxafb_info);
-	gpiod_add_lookup_table(&mioa701_mci_gpio_table);
-	pxa_set_mci_info(&mioa701_mci_info);
-	pxa_set_keypad_info(&mioa701_keypad_info);
-	pxa_set_udc_info(&mioa701_udc_info);
-	pxa_set_ac97_info(&mioa701_ac97_info);
-	pm_power_off = mioa701_poweroff;
-	pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup));
-	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	gsm_init();
-
-	i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
-	i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices));
-	pxa_set_i2c_info(&i2c_pdata);
-	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_camera_info(&mioa701_pxacamera_platform_data);
-
-	regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers,
-				     ARRAY_SIZE(fixed_5v0_consumers),
-				     5000000);
-	regulator_has_full_constraints();
-}
-
-static void mioa701_machine_exit(void)
-{
-	bootstrap_exit();
-	gsm_exit();
-}
-
-MACHINE_START(MIOA701, "MIO A701")
-	.atag_offset	= 0x100,
-	.map_io		= &pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= &pxa27x_init_irq,
-	.handle_irq	= &pxa27x_handle_irq,
-	.init_machine	= mioa701_machine_init,
-	.init_time	= pxa_timer_init,
-	.restart	= mioa701_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701.h b/arch/arm/mach-pxa/mioa701.h
deleted file mode 100644
index d94295c67460..000000000000
--- a/arch/arm/mach-pxa/mioa701.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _MIOA701_H_
-#define _MIOA701_H_
-
-#define MIO_CFG_IN(pin, af)		\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
-	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN))
-
-#define MIO_CFG_OUT(pin, af, state)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
-
-/* Global GPIOs */
-#define GPIO9_CHARGE_EN				9
-#define GPIO18_POWEROFF				18
-#define GPIO87_LCD_POWER			87
-#define GPIO96_AC_DETECT			96
-#define GPIO80_MAYBE_CHARGE_VDROP		80	/* Drop of 88mV */
-
-/* USB */
-#define GPIO13_nUSB_DETECT			13
-#define GPIO22_USB_ENABLE			22
-
-/* SDIO bits */
-#define GPIO78_SDIO_RO				78
-#define GPIO15_SDIO_INSERT			15
-#define GPIO91_SDIO_EN				91
-
-/* Bluetooth */
-#define GPIO14_BT_nACTIVITY			14
-#define GPIO83_BT_ON				83
-#define GPIO77_BT_UNKNOWN1			77
-#define GPIO86_BT_MAYBE_nRESET			86
-
-/* GPS */
-#define GPIO23_GPS_UNKNOWN1			23
-#define GPIO26_GPS_ON				26
-#define GPIO27_GPS_RESET			27
-#define GPIO106_GPS_UNKNOWN2			106
-#define GPIO107_GPS_UNKNOWN3			107
-
-/* GSM */
-#define GPIO24_GSM_MOD_RESET_CMD		24
-#define GPIO88_GSM_nMOD_ON_CMD			88
-#define GPIO90_GSM_nMOD_OFF_CMD			90
-#define GPIO114_GSM_nMOD_DTE_UART_STATE 	114
-#define GPIO25_GSM_MOD_ON_STATE			25
-#define GPIO113_GSM_EVENT			113
-
-/* SOUND */
-#define GPIO12_HPJACK_INSERT			12
-
-/* LEDS */
-#define GPIO10_LED_nCharging			10
-#define GPIO97_LED_nBlue			97
-#define GPIO98_LED_nOrange			98
-#define GPIO82_LED_nVibra			82
-#define GPIO115_LED_nKeyboard			115
-
-/* Keyboard */
-#define GPIO0_KEY_POWER				0
-#define GPIO93_KEY_VOLUME_UP			93
-#define GPIO94_KEY_VOLUME_DOWN			94
-
-/* Camera */
-#define GPIO56_MT9M111_nOE			56
-
-extern struct input_dev *mioa701_evdev;
-extern void mioa701_gpio_lpm_set(unsigned long mfp_pin);
-
-/* Assembler externals mioa701_bootresume.S */
-extern u32 mioa701_bootstrap;
-extern u32 mioa701_jumpaddr;
-extern u32 mioa701_bootstrap_lg;
-
-#endif /* _MIOA701_H */
diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S
deleted file mode 100644
index 4ad2fa27fc41..000000000000
--- a/arch/arm/mach-pxa/mioa701_bootresume.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* Bootloader to resume MIO A701
- *
- * 2007-1-12 Robert Jarzmik
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Note: Yes, part of the following code is located into the .data section.
- *       This is to allow jumpaddr to be accessed with a relative load
- *       while we can't rely on any MMU translation.  We could have put
- *       sleep_save_sp in the .text section as well, but some setups might
- *       insist on it to be truly read-only.
- */
-	.data
-	.align	2
-ENTRY(mioa701_bootstrap)
-0:
-	b	1f
-ENTRY(mioa701_jumpaddr)
-	.word	0x40f00008		@ PSPR in no-MMU mode
-1:
-	mov	r0,     #0xa0000000	@ Don't suppose memory access works
-	orr	r0, r0, #0x00200000	@ even if it's supposed to
-	orr	r0, r0, #0x0000b000
-	mov	r1, #0
-	str	r1, [r0]		@ Early disable resume for next boot
-	ldr	r0, mioa701_jumpaddr	@ (Murphy's Law)
-	ldr	r0, [r0]
-	ret	r0
-2:
-
-ENTRY(mioa701_bootstrap_lg)
-	.data
-	.align	2
-	.word	2b-0b
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
deleted file mode 100644
index 8ef8ac4ab4ac..000000000000
--- a/arch/arm/mach-pxa/mp900.c
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/mp900.c
- *
- *  Support for the NEC MobilePro900/C platform
- *
- *  Based on mach-pxa/gumstix.c
- *
- *  2007, 2008 Kristoffer Ericson <kristoffer.ericson@gmail.com>
- *  2007, 2008 Michael Petchkovsky <mkpetch@internode.on.net>
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/usb/isp116x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa25x.h"
-#include "generic.h"
-
-static void isp116x_pfm_delay(struct device *dev, int delay)
-{
-
-	/* 400MHz PXA2 = 2.5ns / instruction */
-
-	int cyc = delay / 10;
-
-	/* 4 Instructions = 4 x 2.5ns = 10ns */
-	__asm__ volatile ("0:\n"
-		"subs %0, %1, #1\n"
-		"bge 0b\n"
-		:"=r" (cyc)
-		:"0"(cyc)
-	);
-}
-
-static struct isp116x_platform_data isp116x_pfm_data = {
-	.remote_wakeup_enable = 1,
-	.delay = isp116x_pfm_delay,
-};
-
-static struct resource isp116x_pfm_resources[] = {
-	[0] =	{
-		.start	= 0x0d000000,
-		.end	= 0x0d000000 + 1,
-		.flags	= IORESOURCE_MEM,
-		},
-	[1] =	{
-		.start  = 0x0d000000 + 4,
-		.end	= 0x0d000000 + 5,
-		.flags  = IORESOURCE_MEM,
-		},
-	[2] =	{
-		.start	= 61,
-		.end	= 61,
-		.flags	= IORESOURCE_IRQ,
-		},
-};
-
-static struct platform_device mp900c_dummy_device = {
-	.name		= "mp900c_dummy",
-	.id		= -1,
-};
-
-static struct platform_device mp900c_usb = {
-	.name		= "isp116x-hcd",
-	.num_resources	= ARRAY_SIZE(isp116x_pfm_resources),
-	.resource	= isp116x_pfm_resources,
-	.dev.platform_data = &isp116x_pfm_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mp900c_dummy_device,
-	&mp900c_usb,
-};
-
-static void __init mp900c_init(void)
-{
-	printk(KERN_INFO "MobilePro 900/C machine init\n");
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
-MACHINE_START(NEC_MP900, "MobilePro900/C")
-	.atag_offset	= 0x220100,
-	.init_time	= pxa_timer_init,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= mp900c_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
deleted file mode 100644
index fde386f6cffe..000000000000
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ /dev/null
@@ -1,481 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/mxm8x10.c
- *
- * Support for the Embedian MXM-8x10 Computer on Module
- *
- * Copyright (C) 2006 Marvell International Ltd.
- * Copyright (C) 2009 Embedian Inc.
- * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
- *
- * 2007-09-04: eric miao <eric.y.miao@gmail.com>
- *             rewrite to align with latest kernel
- *
- * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
- * 	       Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
- *             rework for upstream merge
- */
-
-#include <linux/serial_8250.h>
-#include <linux/dm9000.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "pxa320.h"
-
-#include "mxm8x10.h"
-
-#include "devices.h"
-#include "generic.h"
-
-/* GPIO pin definition
-
-External device stuff   - Leave unconfigured for now...
----------------------
-GPIO0   -   DREQ    (External DMA Request)
-GPIO3   -   nGCS2   (External Chip Select) Where is nGCS0; nGCS1; nGCS4; nGCS5 ?
-GPIO4   -   nGCS3
-GPIO15  -   EXT_GPIO1
-GPIO16  -   EXT_GPIO2
-GPIO17  -   EXT_GPIO3
-GPIO24  -   EXT_GPIO4
-GPIO25  -   EXT_GPIO5
-GPIO26  -   EXT_GPIO6
-GPIO27  -   EXT_GPIO7
-GPIO28  -   EXT_GPIO8
-GPIO29  -   EXT_GPIO9
-GPIO30  -   EXT_GPIO10
-GPIO31  -   EXT_GPIO11
-GPIO57  -   EXT_GPIO12
-GPIO74  -   EXT_IRQ1
-GPIO75  -   EXT_IRQ2
-GPIO76  -   EXT_IRQ3
-GPIO77  -   EXT_IRQ4
-GPIO78  -   EXT_IRQ5
-GPIO79  -   EXT_IRQ6
-GPIO80  -   EXT_IRQ7
-GPIO81  -   EXT_IRQ8
-GPIO87  -   VCCIO_PWREN (External Device PWREN)
-
-Dallas 1-Wire   - Leave unconfigured for now...
--------------
-GPIO0_2 -   DS - 1Wire
-
-Ethernet
---------
-GPIO1   -   DM9000 PWR
-GPIO9   -   DM9K_nIRQ
-GPIO36  -   DM9K_RESET
-
-Keypad  - Leave unconfigured by for now...
-------
-GPIO1_2 -   KP_DKIN0
-GPIO5_2 -   KP_MKOUT7
-GPIO82  -   KP_DKIN1
-GPIO85  -   KP_DKIN2
-GPIO86  -   KP_DKIN3
-GPIO113 -   KP_MKIN0
-GPIO114 -   KP_MKIN1
-GPIO115 -   KP_MKIN2
-GPIO116 -   KP_MKIN3
-GPIO117 -   KP_MKIN4
-GPIO118 -   KP_MKIN5
-GPIO119 -   KP_MKIN6
-GPIO120 -   KP_MKIN7
-GPIO121 -   KP_MKOUT0
-GPIO122 -   KP_MKOUT1
-GPIO122 -   KP_MKOUT2
-GPIO123 -   KP_MKOUT3
-GPIO124 -   KP_MKOUT4
-GPIO125 -   KP_MKOUT5
-GPIO127 -   KP_MKOUT6
-
-Data Bus    - Leave unconfigured for now...
---------
-GPIO2   -   nWait (Data Bus)
-
-USB Device
-----------
-GPIO4_2 -   USBD_PULLUP
-GPIO10  -   UTM_CLK (USB Device UTM Clk)
-GPIO49  -   USB 2.0 Device UTM_DATA0
-GPIO50  -   USB 2.0 Device UTM_DATA1
-GPIO51  -   USB 2.0 Device UTM_DATA2
-GPIO52  -   USB 2.0 Device UTM_DATA3
-GPIO53  -   USB 2.0 Device UTM_DATA4
-GPIO54  -   USB 2.0 Device UTM_DATA5
-GPIO55  -   USB 2.0 Device UTM_DATA6
-GPIO56  -   USB 2.0 Device UTM_DATA7
-GPIO58  -   UTM_RXVALID (USB 2.0 Device)
-GPIO59  -   UTM_RXACTIVE (USB 2.0 Device)
-GPIO60  -   UTM_RXERROR
-GPIO61  -   UTM_OPMODE0
-GPIO62  -   UTM_OPMODE1
-GPIO71  -   USBD_INT    (USB Device?)
-GPIO73  -   UTM_TXREADY (USB 2.0 Device)
-GPIO83  -   UTM_TXVALID (USB 2.0 Device)
-GPIO98  -   UTM_RESET   (USB 2.0 device)
-GPIO99  -   UTM_XCVR_SELECT
-GPIO100 -   UTM_TERM_SELECT
-GPIO101 -   UTM_SUSPENDM_X
-GPIO102 -   UTM_LINESTATE0
-GPIO103 -   UTM_LINESTATE1
-
-Card-Bus Interface  - Leave unconfigured for now...
-------------------
-GPIO5   -   nPIOR (I/O space output enable)
-GPIO6   -   nPIOW (I/O space write enable)
-GPIO7   -   nIOS16 (Input from I/O space telling size of data bus)
-GPIO8   -   nPWAIT (Input for inserting wait states)
-
-LCD
----
-GPIO6_2     -   LDD0
-GPIO7_2     -   LDD1
-GPIO8_2     -   LDD2
-GPIO9_2     -   LDD3
-GPIO11_2    -   LDD5
-GPIO12_2    -   LDD6
-GPIO13_2    -   LDD7
-GPIO14_2    -   VSYNC
-GPIO15_2    -   HSYNC
-GPIO16_2    -   VCLK
-GPIO17_2    -   HCLK
-GPIO18_2    -   VDEN
-GPIO63      -   LDD8    (CPU LCD)
-GPIO64      -   LDD9    (CPU LCD)
-GPIO65      -   LDD10   (CPU LCD)
-GPIO66      -   LDD11   (CPU LCD)
-GPIO67      -   LDD12   (CPU LCD)
-GPIO68      -   LDD13   (CPU LCD)
-GPIO69      -   LDD14   (CPU LCD)
-GPIO70      -   LDD15   (CPU LCD)
-GPIO88      -   VCCLCD_PWREN (LCD Panel PWREN)
-GPIO97      -   BACKLIGHT_EN
-GPIO104     -   LCD_PWREN
-
-PWM   - Leave unconfigured for now...
----
-GPIO11  -   PWM0
-GPIO12  -   PWM1
-GPIO13  -   PWM2
-GPIO14  -   PWM3
-
-SD-CARD
--------
-GPIO18  -   SDDATA0
-GPIO19  -   SDDATA1
-GPIO20  -   SDDATA2
-GPIO21  -   SDDATA3
-GPIO22  -   SDCLK
-GPIO23  -   SDCMD
-GPIO72  -   SD_WP
-GPIO84  -   SD_nIRQ_CD  (SD-Card)
-
-I2C
----
-GPIO32  -   I2CSCL
-GPIO33  -   I2CSDA
-
-AC97
-----
-GPIO35  -   AC97_SDATA_IN
-GPIO37  -   AC97_SDATA_OUT
-GPIO38  -   AC97_SYNC
-GPIO39  -   AC97_BITCLK
-GPIO40  -   AC97_nRESET
-
-UART1
------
-GPIO41  -   UART_RXD1
-GPIO42  -   UART_TXD1
-GPIO43  -   UART_CTS1
-GPIO44  -   UART_DCD1
-GPIO45  -   UART_DSR1
-GPIO46  -   UART_nRI1
-GPIO47  -   UART_DTR1
-GPIO48  -   UART_RTS1
-
-UART2
------
-GPIO109 -   RTS2
-GPIO110 -   RXD2
-GPIO111 -   TXD2
-GPIO112 -   nCTS2
-
-UART3
------
-GPIO105 -   nCTS3
-GPIO106 -   nRTS3
-GPIO107 -   TXD3
-GPIO108 -   RXD3
-
-SSP3    - Leave unconfigured for now...
-----
-GPIO89  -   SSP3_CLK
-GPIO90  -   SSP3_SFRM
-GPIO91  -   SSP3_TXD
-GPIO92  -   SSP3_RXD
-
-SSP4
-GPIO93  -   SSP4_CLK
-GPIO94  -   SSP4_SFRM
-GPIO95  -   SSP4_TXD
-GPIO96  -   SSP4_RXD
-*/
-
-static mfp_cfg_t mfp_cfg[] __initdata = {
-	/* USB */
-	GPIO10_UTM_CLK,
-	GPIO49_U2D_PHYDATA_0,
-	GPIO50_U2D_PHYDATA_1,
-	GPIO51_U2D_PHYDATA_2,
-	GPIO52_U2D_PHYDATA_3,
-	GPIO53_U2D_PHYDATA_4,
-	GPIO54_U2D_PHYDATA_5,
-	GPIO55_U2D_PHYDATA_6,
-	GPIO56_U2D_PHYDATA_7,
-	GPIO58_UTM_RXVALID,
-	GPIO59_UTM_RXACTIVE,
-	GPIO60_U2D_RXERROR,
-	GPIO61_U2D_OPMODE0,
-	GPIO62_U2D_OPMODE1,
-	GPIO71_GPIO, /* USBD_INT */
-	GPIO73_UTM_TXREADY,
-	GPIO83_U2D_TXVALID,
-	GPIO98_U2D_RESET,
-	GPIO99_U2D_XCVR_SEL,
-	GPIO100_U2D_TERM_SEL,
-	GPIO101_U2D_SUSPEND,
-	GPIO102_UTM_LINESTATE_0,
-	GPIO103_UTM_LINESTATE_1,
-	GPIO4_2_GPIO | MFP_PULL_HIGH, /* UTM_PULLUP */
-
-	/* DM9000 */
-	GPIO1_GPIO,
-	GPIO9_GPIO,
-	GPIO36_GPIO,
-
-	/* AC97 */
-	GPIO35_AC97_SDATA_IN_0,
-	GPIO37_AC97_SDATA_OUT,
-	GPIO38_AC97_SYNC,
-	GPIO39_AC97_BITCLK,
-	GPIO40_AC97_nACRESET,
-
-	/* UARTS */
-	GPIO41_UART1_RXD,
-	GPIO42_UART1_TXD,
-	GPIO43_UART1_CTS,
-	GPIO44_UART1_DCD,
-	GPIO45_UART1_DSR,
-	GPIO46_UART1_RI,
-	GPIO47_UART1_DTR,
-	GPIO48_UART1_RTS,
-
-	GPIO109_UART2_RTS,
-	GPIO110_UART2_RXD,
-	GPIO111_UART2_TXD,
-	GPIO112_UART2_CTS,
-
-	GPIO105_UART3_CTS,
-	GPIO106_UART3_RTS,
-	GPIO107_UART3_TXD,
-	GPIO108_UART3_RXD,
-
-	GPIO78_GPIO,
-	GPIO79_GPIO,
-	GPIO80_GPIO,
-	GPIO81_GPIO,
-
-	/* I2C */
-	GPIO32_I2C_SCL,
-	GPIO33_I2C_SDA,
-
-	/* MMC */
-	GPIO18_MMC1_DAT0,
-	GPIO19_MMC1_DAT1,
-	GPIO20_MMC1_DAT2,
-	GPIO21_MMC1_DAT3,
-	GPIO22_MMC1_CLK,
-	GPIO23_MMC1_CMD,
-	GPIO72_GPIO | MFP_PULL_HIGH, /* Card Detect */
-	GPIO84_GPIO | MFP_PULL_LOW, /* Write Protect */
-
-	/* IRQ */
-	GPIO74_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ1 */
-	GPIO75_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ2 */
-	GPIO76_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ3 */
-	GPIO77_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ4 */
-	GPIO78_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ5 */
-	GPIO79_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ6 */
-	GPIO80_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ7 */
-	GPIO81_GPIO | MFP_LPM_EDGE_RISE  /* EXT_IRQ8 */
-};
-
-/* MMC/MCI Support */
-#if defined(CONFIG_MMC)
-static struct pxamci_platform_data mxm_8x10_mci_platform_data = {
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms = 10,
-};
-
-static struct gpiod_lookup_table mxm_8x10_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 72 */
-		GPIO_LOOKUP("gpio-pxa", MXM_8X10_SD_nCD,
-			    "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 84 */
-		GPIO_LOOKUP("gpio-pxa", MXM_8X10_SD_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-void __init mxm_8x10_mmc_init(void)
-{
-	gpiod_add_lookup_table(&mxm_8x10_mci_gpio_table);
-	pxa_set_mci_info(&mxm_8x10_mci_platform_data);
-}
-#endif
-
-/* USB Open Host Controller Interface */
-static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
-	.port_mode = PMM_NPS_MODE,
-	.flags = ENABLE_PORT_ALL
-};
-
-void __init mxm_8x10_usb_host_init(void)
-{
-	pxa_set_ohci_info(&mxm_8x10_ohci_platform_data);
-}
-
-/* AC97 Sound Support */
-static struct platform_device mxm_8x10_ac97_device = {
-	.name = "pxa2xx-ac97"
-};
-
-void __init mxm_8x10_ac97_init(void)
-{
-	platform_device_register(&mxm_8x10_ac97_device);
-}
-
-/* NAND flash Support */
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-#define NAND_BLOCK_SIZE SZ_128K
-#define NB(x)           (NAND_BLOCK_SIZE * (x))
-static struct mtd_partition mxm_8x10_nand_partitions[] = {
-	[0] = {
-	       .name = "boot",
-	       .size = NB(0x002),
-	       .offset = NB(0x000),
-	       .mask_flags = MTD_WRITEABLE
-	},
-	[1] = {
-	       .name = "kernel",
-	       .size = NB(0x010),
-	       .offset = NB(0x002),
-	       .mask_flags = MTD_WRITEABLE
-	},
-	[2] = {
-	       .name = "root",
-	       .size = NB(0x36c),
-	       .offset = NB(0x012)
-	},
-	[3] = {
-	       .name = "bbt",
-	       .size = NB(0x082),
-	       .offset = NB(0x37e),
-	       .mask_flags = MTD_WRITEABLE
-	}
-};
-
-static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
-	.keep_config	= 1,
-	.parts		= mxm_8x10_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(mxm_8x10_nand_partitions)
-};
-
-static void __init mxm_8x10_nand_init(void)
-{
-	pxa3xx_set_nand_info(&mxm_8x10_nand_info);
-}
-#else
-static inline void mxm_8x10_nand_init(void) {}
-#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
-
-/* Ethernet support: Davicom DM9000 */
-static struct resource dm9k_resources[] = {
-	[0] = {
-	       .start = MXM_8X10_ETH_PHYS + 0x300,
-	       .end = MXM_8X10_ETH_PHYS + 0x300,
-	       .flags = IORESOURCE_MEM
-	},
-	[1] = {
-	       .start = MXM_8X10_ETH_PHYS + 0x308,
-	       .end = MXM_8X10_ETH_PHYS + 0x308,
-	       .flags = IORESOURCE_MEM
-	},
-	[2] = {
-	       .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
-	       .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
-	       .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
-	}
-};
-
-static struct dm9000_plat_data dm9k_plat_data = {
-	.flags = DM9000_PLATF_16BITONLY
-};
-
-static struct platform_device dm9k_device = {
-	.name = "dm9000",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(dm9k_resources),
-	.resource = dm9k_resources,
-	.dev = {
-		.platform_data = &dm9k_plat_data
-	}
-};
-
-static void __init mxm_8x10_ethernet_init(void)
-{
-	platform_device_register(&dm9k_device);
-}
-
-/* PXA UARTs */
-static void __init mxm_8x10_uarts_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-}
-
-/* I2C and Real Time Clock */
-static struct i2c_board_info __initdata mxm_8x10_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68)
-	}
-};
-
-static void __init mxm_8x10_i2c_init(void)
-{
-	i2c_register_board_info(0, mxm_8x10_i2c_devices,
-				ARRAY_SIZE(mxm_8x10_i2c_devices));
-	pxa_set_i2c_info(NULL);
-}
-
-void __init mxm_8x10_barebones_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
-
-	mxm_8x10_uarts_init();
-	mxm_8x10_nand_init();
-	mxm_8x10_i2c_init();
-	mxm_8x10_ethernet_init();
-}
diff --git a/arch/arm/mach-pxa/mxm8x10.h b/arch/arm/mach-pxa/mxm8x10.h
deleted file mode 100644
index dcd32321c995..000000000000
--- a/arch/arm/mach-pxa/mxm8x10.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_MXM_8X10_H
-#define __MACH_MXM_8X10_H
-
-#define MXM_8X10_ETH_PHYS	0x13000000
-
-#if defined(CONFIG_MMC)
-
-#define MXM_8X10_SD_nCD (72)
-#define MXM_8X10_SD_WP (84)
-
-extern void mxm_8x10_mmc_init(void);
-#else
-static inline void mxm_8x10_mmc_init(void) {}
-#endif
-
-extern void mxm_8x10_usb_host_init(void);
-extern void mxm_8x10_ac97_init(void);
-
-extern void mxm_8x10_barebones_init(void);
-
-#endif /* __MACH_MXM_8X10_H */
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
deleted file mode 100644
index 6230381a7ca0..000000000000
--- a/arch/arm/mach-pxa/palm27x.c
+++ /dev/null
@@ -1,473 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Common code for Palm LD, T5, TX, Z72
- *
- * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/regulator/max1586.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include <mach/audio.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include "udc.h"
-#include <linux/platform_data/asoc-palm27x.h>
-#include "palm27x.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data palm27x_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-void __init palm27x_mmc_init(struct gpiod_lookup_table *gtable)
-{
-	if (gtable)
-		gpiod_add_lookup_table(gtable);
-	pxa_set_mci_info(&palm27x_mci_platform_data);
-}
-#endif
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-#if defined(CONFIG_SUSPEND)
-void __init palm27x_pm_init(unsigned long str_base)
-{
-	static const unsigned long resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/*
-	 * Copy the bootloader.
-	 * NOTE: PalmZ72 uses a different wakeup method!
-	 */
-	memcpy(phys_to_virt(str_base), resume, sizeof(resume));
-}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-struct pxafb_mode_info palm_320x480_lcd_mode = {
-	.pixclock	= 57692,
-	.xres		= 320,
-	.yres		= 480,
-	.bpp		= 16,
-
-	.left_margin	= 32,
-	.right_margin	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 1,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-};
-
-struct pxafb_mode_info palm_320x320_lcd_mode = {
-	.pixclock	= 115384,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 27,
-	.right_margin	= 7,
-	.upper_margin	= 7,
-	.lower_margin	= 8,
-
-	.hsync_len	= 6,
-	.vsync_len	= 1,
-};
-
-struct pxafb_mode_info palm_320x320_new_lcd_mode = {
-	.pixclock	= 86538,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 20,
-	.right_margin	= 8,
-	.upper_margin	= 8,
-	.lower_margin	= 5,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-};
-
-static struct pxafb_mach_info palm27x_lcd_screen = {
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static int palm27x_lcd_power;
-static void palm27x_lcd_ctl(int on, struct fb_var_screeninfo *info)
-{
-	gpio_set_value(palm27x_lcd_power, on);
-}
-
-void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
-{
-	palm27x_lcd_screen.modes = mode;
-
-	if (gpio_is_valid(power)) {
-		if (!gpio_request(power, "LCD power")) {
-			pr_err("Palm27x: failed to claim lcd power gpio!\n");
-			return;
-		}
-		if (!gpio_direction_output(power, 1)) {
-			pr_err("Palm27x: lcd power configuration failed!\n");
-			return;
-		}
-		palm27x_lcd_power = power;
-		palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
-	}
-
-	pxa_set_fb_info(NULL, &palm27x_lcd_screen);
-}
-#endif
-
-/******************************************************************************
- * USB Gadget
- ******************************************************************************/
-#if	defined(CONFIG_USB_PXA27X) || \
-	defined(CONFIG_USB_PXA27X_MODULE)
-
-/* The actual GPIO offsets get filled in in the palm27x_udc_init() call */
-static struct gpiod_lookup_table palm27x_udc_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", 0,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", 0,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device palm27x_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
-{
-	palm27x_udc_gpiod_table.table[0].chip_hwnum = vbus;
-	palm27x_udc_gpiod_table.table[1].chip_hwnum = pullup;
-	if (vbus_inverted)
-		palm27x_udc_gpiod_table.table[0].flags = GPIO_ACTIVE_LOW;
-
-	gpiod_add_lookup_table(&palm27x_udc_gpiod_table);
-	platform_device_register(&palm27x_gpio_vbus);
-}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data palm27x_ficp_platform_data = {
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-void __init palm27x_irda_init(int pwdn)
-{
-	palm27x_ficp_platform_data.gpio_pwdown = pwdn;
-	pxa_set_ficp_info(&palm27x_ficp_platform_data);
-}
-#endif
-
-/******************************************************************************
- * WM97xx audio, battery
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_WM97XX) || \
-	defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
-static struct wm97xx_batt_pdata palm27x_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-static struct wm97xx_pdata palm27x_wm97xx_pdata = {
-	.batt_pdata	= &palm27x_batt_pdata,
-};
-
-static pxa2xx_audio_ops_t palm27x_ac97_pdata = {
-	.codec_pdata	= { &palm27x_wm97xx_pdata, },
-};
-
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
-	.jack_gpio	= -1,
-};
-
-static struct platform_device palm27x_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palm27x_asoc_pdata,
-	},
-};
-
-void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
-{
-	palm27x_ac97_pdata.reset_gpio	= reset;
-	palm27x_asoc_pdata.jack_gpio	= jack;
-
-	if (minv < 0 || maxv < 0) {
-		palm27x_ac97_pdata.codec_pdata[0] = NULL;
-		pxa_set_ac97_info(&palm27x_ac97_pdata);
-	} else {
-		palm27x_batt_pdata.min_voltage	= minv,
-		palm27x_batt_pdata.max_voltage	= maxv,
-
-		pxa_set_ac97_info(&palm27x_ac97_pdata);
-		platform_device_register(&palm27x_asoc);
-	}
-}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct pwm_lookup palm27x_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 3500 * 1024,
-		   PWM_POLARITY_NORMAL),
-};
-
-static int palm_bl_power;
-static int palm_lcd_power;
-
-static int palm27x_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(palm_bl_power, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(palm_bl_power, 0);
-	if (ret)
-		goto err2;
-
-	if (gpio_is_valid(palm_lcd_power)) {
-		ret = gpio_request(palm_lcd_power, "LCD POWER");
-		if (ret)
-			goto err2;
-		ret = gpio_direction_output(palm_lcd_power, 0);
-		if (ret)
-			goto err3;
-	}
-
-	return 0;
-err3:
-	gpio_free(palm_lcd_power);
-err2:
-	gpio_free(palm_bl_power);
-err:
-	return ret;
-}
-
-static int palm27x_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(palm_bl_power, brightness);
-	if (gpio_is_valid(palm_lcd_power))
-		gpio_set_value(palm_lcd_power, brightness);
-	return brightness;
-}
-
-static void palm27x_backlight_exit(struct device *dev)
-{
-	gpio_free(palm_bl_power);
-	if (gpio_is_valid(palm_lcd_power))
-		gpio_free(palm_lcd_power);
-}
-
-static struct platform_pwm_backlight_data palm27x_backlight_data = {
-	.max_brightness	= 0xfe,
-	.dft_brightness	= 0x7e,
-	.init		= palm27x_backlight_init,
-	.notify		= palm27x_backlight_notify,
-	.exit		= palm27x_backlight_exit,
-};
-
-static struct platform_device palm27x_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palm27x_backlight_data,
-	},
-};
-
-void __init palm27x_pwm_init(int bl, int lcd)
-{
-	palm_bl_power	= bl;
-	palm_lcd_power	= lcd;
-	pwm_add_table(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup));
-	platform_device_register(&palm27x_backlight);
-}
-#endif
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
-static int palm_ac_state;
-static int palm_usb_state;
-
-static int palm27x_power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(palm_ac_state, "AC state");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(palm_ac_state);
-	if (ret)
-		goto err2;
-
-	if (gpio_is_valid(palm_usb_state)) {
-		ret = gpio_request(palm_usb_state, "USB state");
-		if (ret)
-			goto err2;
-		ret = gpio_direction_input(palm_usb_state);
-		if (ret)
-			goto err3;
-	}
-
-	return 0;
-err3:
-	gpio_free(palm_usb_state);
-err2:
-	gpio_free(palm_ac_state);
-err1:
-	return ret;
-}
-
-static void palm27x_power_supply_exit(struct device *dev)
-{
-	gpio_free(palm_usb_state);
-	gpio_free(palm_ac_state);
-}
-
-static int palm27x_is_ac_online(void)
-{
-	return gpio_get_value(palm_ac_state);
-}
-
-static int palm27x_is_usb_online(void)
-{
-	return !gpio_get_value(palm_usb_state);
-}
-static char *palm27x_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata palm27x_ps_info = {
-	.init			= palm27x_power_supply_init,
-	.exit			= palm27x_power_supply_exit,
-	.is_ac_online		= palm27x_is_ac_online,
-	.is_usb_online		= palm27x_is_usb_online,
-	.supplied_to		= palm27x_supplicants,
-	.num_supplicants	= ARRAY_SIZE(palm27x_supplicants),
-};
-
-static struct platform_device palm27x_power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palm27x_ps_info,
-	},
-};
-
-void __init palm27x_power_init(int ac, int usb)
-{
-	palm_ac_state	= ac;
-	palm_usb_state	= usb;
-	platform_device_register(&palm27x_power_supply);
-}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-static struct regulator_consumer_supply palm27x_max1587a_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data palm27x_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 900000,
-		.max_uV		= 1705000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= palm27x_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(palm27x_max1587a_consumers),
-};
-
-static struct max1586_subdev_data palm27x_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &palm27x_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data palm27x_max1587a_info = {
-	.subdevs     = palm27x_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(palm27x_max1587a_subdevs),
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &palm27x_max1587a_info,
-	},
-};
-
-static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
-	.use_pio	= 1,
-};
-
-void __init palm27x_pmic_init(void)
-{
-	i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
-	pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
-}
-#endif
diff --git a/arch/arm/mach-pxa/palm27x.h b/arch/arm/mach-pxa/palm27x.h
deleted file mode 100644
index bd3075bbb3aa..000000000000
--- a/arch/arm/mach-pxa/palm27x.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Common functions for Palm LD, T5, TX, Z72
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- */
-#ifndef	__INCLUDE_MACH_PALM27X__
-#define	__INCLUDE_MACH_PALM27X__
-
-#include <linux/gpio/machine.h>
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-extern void __init palm27x_mmc_init(struct gpiod_lookup_table *gtable);
-#else
-static inline void palm27x_mmc_init(struct gpiod_lookup_table *gtable)
-{}
-#endif
-
-#if defined(CONFIG_SUSPEND)
-extern void __init palm27x_pm_init(unsigned long str_base);
-#else
-static inline void palm27x_pm_init(unsigned long str_base) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-extern struct pxafb_mode_info palm_320x480_lcd_mode;
-extern struct pxafb_mode_info palm_320x320_lcd_mode;
-extern struct pxafb_mode_info palm_320x320_new_lcd_mode;
-extern void __init palm27x_lcd_init(int power,
-					struct pxafb_mode_info *mode);
-#else
-#define palm27x_lcd_init(power, mode)	do {} while (0)
-#endif
-
-#if	defined(CONFIG_USB_PXA27X) || \
-	defined(CONFIG_USB_PXA27X_MODULE)
-extern void __init palm27x_udc_init(int vbus, int pullup,
-					int vbus_inverted);
-#else
-static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {}
-#endif
-
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-extern void __init palm27x_irda_init(int pwdn);
-#else
-static inline void palm27x_irda_init(int pwdn) {}
-#endif
-
-#if	defined(CONFIG_TOUCHSCREEN_WM97XX) || \
-	defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
-extern void __init palm27x_ac97_init(int minv, int maxv, int jack,
-					int reset);
-#else
-static inline void palm27x_ac97_init(int minv, int maxv, int jack, int reset) {}
-#endif
-
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-extern void __init palm27x_pwm_init(int bl, int lcd);
-#else
-static inline void palm27x_pwm_init(int bl, int lcd) {}
-#endif
-
-#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
-extern void __init palm27x_power_init(int ac, int usb);
-#else
-static inline void palm27x_power_init(int ac, int usb) {}
-#endif
-
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-extern void __init palm27x_pmic_init(void);
-#else
-static inline void palm27x_pmic_init(void) {}
-#endif
-
-#endif	/* __INCLUDE_MACH_PALM27X__ */
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
deleted file mode 100644
index 5f73716a77f0..000000000000
--- a/arch/arm/mach-pxa/palmld.c
+++ /dev/null
@@ -1,377 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Palm LifeDrive
- *
- * Author:     Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Alex Osborne <ato@meshy.org>
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include <mach/audio.h>
-#include <mach/palmld.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/asoc-palm27x.h>
-#include "palm27x.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmld_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO114_GPIO,	/* SD power */
-	GPIO116_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO108_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* GPIO KEYS */
-	GPIO10_GPIO,	/* hotsync button */
-	GPIO12_GPIO,	/* power switch */
-	GPIO15_GPIO,	/* lock switch */
-
-	/* LEDs */
-	GPIO52_GPIO,	/* green led */
-	GPIO94_GPIO,	/* orange led */
-
-	/* PCMCIA */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO36_GPIO,	/* wifi power */
-	GPIO38_GPIO,	/* wifi ready */
-	GPIO81_GPIO,	/* wifi reset */
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-
-	/* HDD */
-	GPIO98_GPIO,	/* HDD reset */
-	GPIO115_GPIO,	/* HDD power */
-
-	/* MISC */
-	GPIO13_GPIO,	/* earphone detect */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition palmld_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data palmld_flash_data[] = {
-	{
-		.width		= 2,			/* bankwidth in bytes */
-		.parts		= palmld_partitions,
-		.nr_parts	= ARRAY_SIZE(palmld_partitions)
-	}
-};
-
-static struct resource palmld_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_4M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device palmld_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &palmld_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = palmld_flash_data,
-	},
-};
-
-static void __init palmld_nor_init(void)
-{
-	platform_device_register(&palmld_flash);
-}
-#else
-static inline void palmld_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int palmld_matrix_keys[] = {
-	KEY(0, 1, KEY_F2),
-	KEY(0, 2, KEY_UP),
-
-	KEY(1, 0, KEY_F3),
-	KEY(1, 1, KEY_F4),
-	KEY(1, 2, KEY_RIGHT),
-
-	KEY(2, 0, KEY_F1),
-	KEY(2, 1, KEY_F5),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_F6),
-	KEY(3, 1, KEY_ENTER),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct matrix_keymap_data palmld_matrix_keymap_data = {
-	.keymap			= palmld_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmld_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_keymap_data	= &palmld_matrix_keymap_data,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmld_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmld_keypad_platform_data);
-}
-#else
-static inline void palmld_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmld_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
-	{KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
-	{KEY_POWER, GPIO_NR_PALMLD_POWER_SWITCH, 0, "Power Switch" },
-};
-
-static struct gpio_keys_platform_data palmld_pxa_keys_data = {
-	.buttons	= palmld_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmld_pxa_buttons),
-};
-
-static struct platform_device palmld_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmld_pxa_keys_data,
-	},
-};
-
-static void __init palmld_keys_init(void)
-{
-	platform_device_register(&palmld_pxa_keys);
-}
-#else
-static inline void palmld_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led gpio_leds[] = {
-{
-	.name			= "palmld:green:led",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMLD_LED_GREEN,
-}, {
-	.name			= "palmld:amber:led",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMLD_LED_AMBER,
-},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device palmld_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	}
-};
-
-static void __init palmld_leds_init(void)
-{
-	platform_device_register(&palmld_leds);
-}
-#else
-static inline void palmld_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * HDD
- ******************************************************************************/
-#if defined(CONFIG_PATA_PALMLD) || defined(CONFIG_PATA_PALMLD_MODULE)
-static struct platform_device palmld_ide_device = {
-	.name	= "pata_palmld",
-	.id	= -1,
-};
-
-static struct gpiod_lookup_table palmld_ide_gpio_table = {
-	.dev_id = "pata_palmld",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_IDE_PWEN,
-			    "power", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_IDE_RESET,
-			    "reset", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init palmld_ide_init(void)
-{
-	gpiod_add_lookup_table(&palmld_ide_gpio_table);
-	platform_device_register(&palmld_ide_device);
-}
-#else
-static inline void palmld_ide_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct map_desc palmld_io_desc[] __initdata = {
-{
-	.virtual	= PALMLD_IDE_VIRT,
-	.pfn		= __phys_to_pfn(PALMLD_IDE_PHYS),
-	.length		= PALMLD_IDE_SIZE,
-	.type		= MT_DEVICE
-},
-{
-	.virtual	= PALMLD_USB_VIRT,
-	.pfn		= __phys_to_pfn(PALMLD_USB_PHYS),
-	.length		= PALMLD_USB_SIZE,
-	.type		= MT_DEVICE
-},
-};
-
-static void __init palmld_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
-}
-
-static struct gpiod_lookup_table palmld_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init palmld_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(&palmld_mci_gpio_table);
-	palm27x_pm_init(PALMLD_STR_BASE);
-	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
-	palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE);
-	palm27x_ac97_init(PALMLD_BAT_MIN_VOLTAGE, PALMLD_BAT_MAX_VOLTAGE,
-			GPIO_NR_PALMLD_EARPHONE_DETECT, 95);
-	palm27x_pwm_init(GPIO_NR_PALMLD_BL_POWER, GPIO_NR_PALMLD_LCD_POWER);
-	palm27x_power_init(GPIO_NR_PALMLD_POWER_DETECT,
-			GPIO_NR_PALMLD_USB_DETECT_N);
-	palm27x_pmic_init();
-	palmld_kpc_init();
-	palmld_keys_init();
-	palmld_nor_init();
-	palmld_leds_init();
-	palmld_ide_init();
-}
-
-MACHINE_START(PALMLD, "Palm LifeDrive")
-	.atag_offset	= 0x100,
-	.map_io		= palmld_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmld_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
deleted file mode 100644
index 7c7cbb4e677e..000000000000
--- a/arch/arm/mach-pxa/palmt5.c
+++ /dev/null
@@ -1,225 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Palm Tungsten|T5
- *
- * Author:	Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Ales Snuparek <snuparek@atlas.cz>
- *		Justin Kendrick <twilightsentry@gmail.com>
- *		RichardT5 <richard_t5@users.sourceforge.net>
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/memblock.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include <mach/audio.h>
-#include "palmt5.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "udc.h"
-#include <linux/platform_data/asoc-palm27x.h>
-#include "palm27x.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmt5_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO114_GPIO,	/* SD power */
-	GPIO115_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO40_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* USB */
-	GPIO15_GPIO,	/* usb detect */
-	GPIO93_GPIO,	/* usb power */
-
-	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-
-	/* MISC */
-	GPIO10_GPIO,	/* hotsync button */
-	GPIO90_GPIO,	/* power detect */
-	GPIO107_GPIO,	/* earphone detect */
-};
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int palmt5_matrix_keys[] = {
-	KEY(0, 0, KEY_POWER),
-	KEY(0, 1, KEY_F1),
-	KEY(0, 2, KEY_ENTER),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_F3),
-	KEY(1, 2, KEY_F4),
-
-	KEY(2, 0, KEY_UP),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_RIGHT),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct matrix_keymap_data palmt5_matrix_keymap_data = {
-	.keymap			= palmt5_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmt5_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_keymap_data	= &palmt5_matrix_keymap_data,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmt5_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmt5_keypad_platform_data);
-}
-#else
-static inline void palmt5_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmt5_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
-};
-
-static struct gpio_keys_platform_data palmt5_pxa_keys_data = {
-	.buttons	= palmt5_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmt5_pxa_buttons),
-};
-
-static struct platform_device palmt5_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmt5_pxa_keys_data,
-	},
-};
-
-static void __init palmt5_keys_init(void)
-{
-	platform_device_register(&palmt5_pxa_keys);
-}
-#else
-static inline void palmt5_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init palmt5_reserve(void)
-{
-	memblock_reserve(0xa0200000, 0x1000);
-}
-
-static struct gpiod_lookup_table palmt5_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMT5_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMT5_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMT5_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init palmt5_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(&palmt5_mci_gpio_table);
-	palm27x_pm_init(PALMT5_STR_BASE);
-	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
-	palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N,
-			GPIO_NR_PALMT5_USB_PULLUP, 1);
-	palm27x_irda_init(GPIO_NR_PALMT5_IR_DISABLE);
-	palm27x_ac97_init(PALMT5_BAT_MIN_VOLTAGE, PALMT5_BAT_MAX_VOLTAGE,
-			GPIO_NR_PALMT5_EARPHONE_DETECT, 95);
-	palm27x_pwm_init(GPIO_NR_PALMT5_BL_POWER, GPIO_NR_PALMT5_LCD_POWER);
-	palm27x_power_init(GPIO_NR_PALMT5_POWER_DETECT, -1);
-	palm27x_pmic_init();
-	palmt5_kpc_init();
-	palmt5_keys_init();
-}
-
-MACHINE_START(PALMT5, "Palm Tungsten|T5")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.reserve	= palmt5_reserve,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmt5_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.h b/arch/arm/mach-pxa/palmt5.h
deleted file mode 100644
index 1fb1da7c8da3..000000000000
--- a/arch/arm/mach-pxa/palmt5.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer
- *
- * Authors:	Ales Snuparek <snuparek@atlas.cz>
- *		Marek Vasut <marek.vasut@gmail.com>
- *		Justin Kendrick <twilightsentry@gmail.com>
- *		RichardT5 <richard_t5@users.sourceforge.net>
- */
-
-#ifndef _INCLUDE_PALMT5_H_
-#define _INCLUDE_PALMT5_H_
-
-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMT5_GPIO_RESET		1
-
-#define GPIO_NR_PALMT5_POWER_DETECT		90
-#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N		10
-#define GPIO_NR_PALMT5_EARPHONE_DETECT		107
-
-/* SD/MMC */
-#define GPIO_NR_PALMT5_SD_DETECT_N		14
-#define GPIO_NR_PALMT5_SD_POWER			114
-#define GPIO_NR_PALMT5_SD_READONLY		115
-
-/* TOUCHSCREEN */
-#define GPIO_NR_PALMT5_WM9712_IRQ		27
-
-/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMT5_IR_DISABLE		40
-
-/* USB */
-#define GPIO_NR_PALMT5_USB_DETECT_N		15
-#define GPIO_NR_PALMT5_USB_PULLUP		93
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMT5_BL_POWER			84
-#define GPIO_NR_PALMT5_LCD_POWER		96
-
-/* BLUETOOTH */
-#define GPIO_NR_PALMT5_BT_POWER			17
-#define GPIO_NR_PALMT5_BT_RESET			83
-
-/* INTERRUPTS */
-#define IRQ_GPIO_PALMT5_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_SD_DETECT_N)
-#define IRQ_GPIO_PALMT5_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_WM9712_IRQ)
-#define IRQ_GPIO_PALMT5_USB_DETECT	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_USB_DETECT)
-#define IRQ_GPIO_PALMT5_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_GPIO_RESET)
-
-/** HERE ARE INIT VALUES **/
-
-/* Various addresses  */
-#define PALMT5_PHYS_RAM_START	0xa0000000
-#define PALMT5_PHYS_IO_START	0x40000000
-#define PALMT5_STR_BASE		0xa0200000
-
-/* TOUCHSCREEN */
-#define AC97_LINK_FRAME		21
-
-/* BATTERY */
-#define PALMT5_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMT5_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMT5_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMT5_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMT5_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMT5_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMT5_MAX_LIFE_MINS		360    /* on-life in minutes */
-
-#define PALMT5_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMT5_MAX_INTENSITY		0xFE
-#define PALMT5_DEFAULT_INTENSITY	0x7E
-#define PALMT5_LIMIT_MASK		0x7F
-#define PALMT5_PRESCALER		0x3F
-#define PALMT5_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
deleted file mode 100644
index 455cb8ccaf26..000000000000
--- a/arch/arm/mach-pxa/palmtc.c
+++ /dev/null
@@ -1,539 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/palmtc.c
- *
- * Support for the Palm Tungsten|C
- *
- * Author:	Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Petr Blaha <p3t3@centrum.cz>
- *		Chetan S. Kumar <shivakumar.chetan@gmail.com>
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/input.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio/machine.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/ucb1400.h>
-#include <linux/power_supply.h>
-#include <linux/gpio_keys.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa25x.h"
-#include <mach/audio.h>
-#include <mach/palmtc.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include "udc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmtc_pin_config[] __initdata = {
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-	GPIO12_GPIO,	/* detect */
-	GPIO32_GPIO,	/* power */
-	GPIO54_GPIO,	/* r/o switch */
-
-	/* PCMCIA */
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO49_nPWE,
-	GPIO48_nPOE,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO57_nIOIS16,
-	GPIO56_nPWAIT,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* IrDA */
-	GPIO45_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO17_PWM1_OUT,
-
-	/* USB */
-	GPIO4_GPIO,	/* detect */
-	GPIO36_GPIO,	/* pullup */
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* MATRIX KEYPAD */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 0 */
-	GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 1 */
-	GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 2 */
-	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 3 */
-	GPIO18_GPIO | MFP_LPM_DRIVE_LOW,	/* out 0 */
-	GPIO19_GPIO | MFP_LPM_DRIVE_LOW,	/* out 1 */
-	GPIO20_GPIO | MFP_LPM_DRIVE_LOW,	/* out 2 */
-	GPIO21_GPIO | MFP_LPM_DRIVE_LOW,	/* out 3 */
-	GPIO22_GPIO | MFP_LPM_DRIVE_LOW,	/* out 4 */
-	GPIO23_GPIO | MFP_LPM_DRIVE_LOW,	/* out 5 */
-	GPIO24_GPIO | MFP_LPM_DRIVE_LOW,	/* out 6 */
-	GPIO25_GPIO | MFP_LPM_DRIVE_LOW,	/* out 7 */
-	GPIO26_GPIO | MFP_LPM_DRIVE_LOW,	/* out 8 */
-	GPIO27_GPIO | MFP_LPM_DRIVE_LOW,	/* out 9 */
-	GPIO79_GPIO | MFP_LPM_DRIVE_LOW,	/* out 10 */
-	GPIO80_GPIO | MFP_LPM_DRIVE_LOW,	/* out 11 */
-
-	/* PXA GPIO KEYS */
-	GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH,	/* hotsync button on cradle */
-
-	/* MISC */
-	GPIO1_RST,	/* reset */
-	GPIO2_GPIO,	/* earphone detect */
-	GPIO16_GPIO,	/* backlight switch */
-};
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data palmtc_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static struct gpiod_lookup_table palmtc_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init palmtc_mmc_init(void)
-{
-	gpiod_add_lookup_table(&palmtc_mci_gpio_table);
-	pxa_set_mci_info(&palmtc_mci_platform_data);
-}
-#else
-static inline void palmtc_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmtc_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
-};
-
-static struct gpio_keys_platform_data palmtc_pxa_keys_data = {
-	.buttons	= palmtc_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmtc_pxa_buttons),
-};
-
-static struct platform_device palmtc_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmtc_pxa_keys_data,
-	},
-};
-
-static void __init palmtc_keys_init(void)
-{
-	platform_device_register(&palmtc_pxa_keys);
-}
-#else
-static inline void palmtc_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-
-static struct gpiod_lookup_table palmtc_pwm_bl_gpio_table = {
-	.dev_id = "pwm-backlight.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_BL_POWER,
-			    "enable", GPIO_ACTIVE_HIGH),
-	},
-};
-
-static struct pwm_lookup palmtc_pwm_lookup[] = {
-	PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data palmtc_backlight_data = {
-	.max_brightness	= PALMTC_MAX_INTENSITY,
-	.dft_brightness	= PALMTC_MAX_INTENSITY,
-};
-
-static struct platform_device palmtc_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa25x_device_pwm1.dev,
-		.platform_data	= &palmtc_backlight_data,
-	},
-};
-
-static void __init palmtc_pwm_init(void)
-{
-	gpiod_add_lookup_table(&palmtc_pwm_bl_gpio_table);
-	pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup));
-	platform_device_register(&palmtc_backlight);
-}
-#else
-static inline void palmtc_pwm_init(void) {}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data palmtc_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMTC_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-static void __init palmtc_irda_init(void)
-{
-	pxa_set_ficp_info(&palmtc_ficp_platform_data);
-}
-#else
-static inline void palmtc_irda_init(void) {}
-#endif
-
-/******************************************************************************
- * Keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
-static const uint32_t palmtc_matrix_keys[] = {
-	KEY(0, 0, KEY_F1),
-	KEY(0, 1, KEY_X),
-	KEY(0, 2, KEY_POWER),
-	KEY(0, 3, KEY_TAB),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Q),
-	KEY(0, 6, KEY_LEFTSHIFT),
-	KEY(0, 7, KEY_Z),
-	KEY(0, 8, KEY_S),
-	KEY(0, 9, KEY_W),
-	KEY(0, 10, KEY_E),
-	KEY(0, 11, KEY_UP),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 3, KEY_D),
-	KEY(1, 4, KEY_C),
-	KEY(1, 5, KEY_F),
-	KEY(1, 6, KEY_R),
-	KEY(1, 7, KEY_SPACE),
-	KEY(1, 8, KEY_V),
-	KEY(1, 9, KEY_G),
-	KEY(1, 10, KEY_T),
-	KEY(1, 11, KEY_LEFT),
-
-	KEY(2, 0, KEY_F3),
-	KEY(2, 1, KEY_LEFTCTRL),
-	KEY(2, 3, KEY_H),
-	KEY(2, 4, KEY_Y),
-	KEY(2, 5, KEY_N),
-	KEY(2, 6, KEY_J),
-	KEY(2, 7, KEY_U),
-	KEY(2, 8, KEY_M),
-	KEY(2, 9, KEY_K),
-	KEY(2, 10, KEY_I),
-	KEY(2, 11, KEY_RIGHT),
-
-	KEY(3, 0, KEY_F4),
-	KEY(3, 1, KEY_ENTER),
-	KEY(3, 3, KEY_DOT),
-	KEY(3, 4, KEY_L),
-	KEY(3, 5, KEY_O),
-	KEY(3, 6, KEY_LEFTALT),
-	KEY(3, 7, KEY_ENTER),
-	KEY(3, 8, KEY_BACKSPACE),
-	KEY(3, 9, KEY_P),
-	KEY(3, 10, KEY_B),
-	KEY(3, 11, KEY_FN),
-};
-
-const struct matrix_keymap_data palmtc_keymap_data = {
-	.keymap			= palmtc_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
-};
-
-static const unsigned int palmtc_keypad_row_gpios[] = {
-	0, 9, 10, 11
-};
-
-static const unsigned int palmtc_keypad_col_gpios[] = {
-	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
-};
-
-static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
-	.keymap_data	= &palmtc_keymap_data,
-	.row_gpios	= palmtc_keypad_row_gpios,
-	.num_row_gpios	= ARRAY_SIZE(palmtc_keypad_row_gpios),
-	.col_gpios	= palmtc_keypad_col_gpios,
-	.num_col_gpios	= ARRAY_SIZE(palmtc_keypad_col_gpios),
-	.active_low	= 1,
-
-	.debounce_ms		= 20,
-	.col_scan_delay_us	= 5,
-};
-
-static struct platform_device palmtc_keyboard = {
-	.name	= "matrix-keypad",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmtc_keypad_platform_data,
-	},
-};
-static void __init palmtc_mkp_init(void)
-{
-	platform_device_register(&palmtc_keyboard);
-}
-#else
-static inline void palmtc_mkp_init(void) {}
-#endif
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
-static struct gpiod_lookup_table palmtc_udc_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_USB_DETECT_N,
-			    "vbus", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_USB_POWER,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device palmtc_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-static void __init palmtc_udc_init(void)
-{
-	gpiod_add_lookup_table(&palmtc_udc_gpiod_table);
-	platform_device_register(&palmtc_gpio_vbus);
-};
-#else
-static inline void palmtc_udc_init(void) {}
-#endif
-
-/******************************************************************************
- * Touchscreen / Battery / GPIO-extender
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static struct platform_device palmtc_ucb1400_device = {
-	.name	= "ucb1400_core",
-	.id	= -1,
-};
-
-static void __init palmtc_ts_init(void)
-{
-	pxa_set_ac97_info(NULL);
-	platform_device_register(&palmtc_ucb1400_device);
-}
-#else
-static inline void palmtc_ts_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led palmtc_gpio_leds[] = {
-{
-	.name			= "palmtc:green:user",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMTC_LED_POWER,
-	.active_low		= 1,
-}, {
-	.name			= "palmtc:vibra:vibra",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMTC_VIBRA_POWER,
-	.active_low		= 1,
-}
-
-};
-
-static struct gpio_led_platform_data palmtc_gpio_led_info = {
-	.leds		= palmtc_gpio_leds,
-	.num_leds	= ARRAY_SIZE(palmtc_gpio_leds),
-};
-
-static struct platform_device palmtc_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmtc_gpio_led_info,
-	}
-};
-
-static void __init palmtc_leds_init(void)
-{
-	platform_device_register(&palmtc_leds);
-}
-#else
-static inline void palmtc_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct resource palmtc_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_16M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct mtd_partition palmtc_flash_parts[] = {
-	{
-		.name	= "U-Boot Bootloader",
-		.offset	= 0x0,
-		.size	= 0x40000,
-	},
-	{
-		.name	= "Linux Kernel",
-		.offset	= 0x40000,
-		.size	= 0x2c0000,
-	},
-	{
-		.name	= "Filesystem",
-		.offset	= 0x300000,
-		.size	= 0xcc0000,
-	},
-	{
-		.name	= "U-Boot Environment",
-		.offset	= 0xfc0000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data palmtc_flash_data = {
-	.width		= 4,
-	.parts		= palmtc_flash_parts,
-	.nr_parts	= ARRAY_SIZE(palmtc_flash_parts),
-};
-
-static struct platform_device palmtc_flash = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= &palmtc_flash_resource,
-	.num_resources	= 1,
-	.dev = {
-		.platform_data	= &palmtc_flash_data,
-	},
-};
-
-static void __init palmtc_nor_init(void)
-{
-	platform_device_register(&palmtc_flash);
-}
-#else
-static inline void palmtc_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info palmtc_lcd_modes[] = {
-	{
-		.pixclock	= 115384,
-		.xres		= 320,
-		.yres		= 320,
-		.bpp		= 16,
-
-		.left_margin	= 27,
-		.right_margin	= 7,
-		.upper_margin	= 7,
-		.lower_margin	= 8,
-
-		.hsync_len	= 6,
-		.vsync_len	= 1,
-	},
-};
-
-static struct pxafb_mach_info palmtc_lcd_screen = {
-	.modes			= palmtc_lcd_modes,
-	.num_modes		= ARRAY_SIZE(palmtc_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init palmtc_lcd_init(void)
-{
-	pxa_set_fb_info(NULL, &palmtc_lcd_screen);
-}
-#else
-static inline void palmtc_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init palmtc_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_hwuart_info(NULL);
-
-	palmtc_mmc_init();
-	palmtc_keys_init();
-	palmtc_pwm_init();
-	palmtc_irda_init();
-	palmtc_mkp_init();
-	palmtc_udc_init();
-	palmtc_ts_init();
-	palmtc_nor_init();
-	palmtc_lcd_init();
-	palmtc_leds_init();
-};
-
-MACHINE_START(PALMTC, "Palm Tungsten|C")
-	.atag_offset 	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmtc_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
deleted file mode 100644
index a2b10db4aacc..000000000000
--- a/arch/arm/mach-pxa/palmte2.c
+++ /dev/null
@@ -1,383 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Palm Tungsten|E2
- *
- * Author:
- *	Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
- *
- * Rewrite for mainline:
- *	Marek Vasut <marek.vasut@gmail.com>
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio/machine.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa25x.h"
-#include <mach/audio.h>
-#include "palmte2.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include "udc.h"
-#include <linux/platform_data/asoc-palm27x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmte2_pin_config[] __initdata = {
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-	GPIO10_GPIO,	/* SD detect */
-	GPIO55_GPIO,	/* SD power */
-	GPIO51_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO15_GPIO,	/* usb detect */
-	GPIO53_GPIO,	/* usb power */
-
-	/* IrDA */
-	GPIO48_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* GPIO KEYS */
-	GPIO5_GPIO,	/* notes */
-	GPIO7_GPIO,	/* tasks */
-	GPIO11_GPIO,	/* calendar */
-	GPIO13_GPIO,	/* contacts */
-	GPIO14_GPIO,	/* center */
-	GPIO19_GPIO,	/* left */
-	GPIO20_GPIO,	/* right */
-	GPIO21_GPIO,	/* down */
-	GPIO22_GPIO,	/* up */
-
-	/* MISC */
-	GPIO1_RST,	/* reset */
-	GPIO4_GPIO,	/* Hotsync button */
-	GPIO9_GPIO,	/* power detect */
-	GPIO15_GPIO,	/* earphone detect */
-	GPIO37_GPIO,	/* LCD power */
-	GPIO56_GPIO,	/* Backlight power */
-};
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmte2_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table palmte2_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-static struct gpio_keys_button palmte2_pxa_buttons[] = {
-	{KEY_F1,	GPIO_NR_PALMTE2_KEY_CONTACTS,	1, "Contacts" },
-	{KEY_F2,	GPIO_NR_PALMTE2_KEY_CALENDAR,	1, "Calendar" },
-	{KEY_F3,	GPIO_NR_PALMTE2_KEY_TASKS,	1, "Tasks" },
-	{KEY_F4,	GPIO_NR_PALMTE2_KEY_NOTES,	1, "Notes" },
-	{KEY_ENTER,	GPIO_NR_PALMTE2_KEY_CENTER,	1, "Center" },
-	{KEY_LEFT,	GPIO_NR_PALMTE2_KEY_LEFT,	1, "Left" },
-	{KEY_RIGHT,	GPIO_NR_PALMTE2_KEY_RIGHT,	1, "Right" },
-	{KEY_DOWN,	GPIO_NR_PALMTE2_KEY_DOWN,	1, "Down" },
-	{KEY_UP,	GPIO_NR_PALMTE2_KEY_UP,		1, "Up" },
-};
-
-static struct gpio_keys_platform_data palmte2_pxa_keys_data = {
-	.buttons	= palmte2_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmte2_pxa_buttons),
-};
-
-static struct platform_device palmte2_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmte2_pxa_keys_data,
-	},
-};
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static struct pwm_lookup palmte2_pwm_lookup[] = {
-	PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL,
-		   PALMTE2_PERIOD_NS, PWM_POLARITY_NORMAL),
-};
-
-static struct gpio palmte_bl_gpios[] = {
-	{ GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
-	{ GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
-};
-
-static int palmte2_backlight_init(struct device *dev)
-{
-	return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios));
-}
-
-static int palmte2_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);
-	return brightness;
-}
-
-static void palmte2_backlight_exit(struct device *dev)
-{
-	gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios));
-}
-
-static struct platform_pwm_backlight_data palmte2_backlight_data = {
-	.max_brightness	= PALMTE2_MAX_INTENSITY,
-	.dft_brightness	= PALMTE2_MAX_INTENSITY,
-	.init		= palmte2_backlight_init,
-	.notify		= palmte2_backlight_notify,
-	.exit		= palmte2_backlight_exit,
-};
-
-static struct platform_device palmte2_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa25x_device_pwm0.dev,
-		.platform_data	= &palmte2_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmte2_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMTE2_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpiod_lookup_table palmte2_udc_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_USB_DETECT_N,
-			    "vbus", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_USB_PULLUP,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device palmte2_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	return 0;
-
-err2:
-	gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmte2_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
-}
-
-static char *palmte2_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmte2_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmte2_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmte2_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx audio, battery
- ******************************************************************************/
-static struct wm97xx_batt_pdata palmte2_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.max_voltage	= PALMTE2_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMTE2_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-static struct wm97xx_pdata palmte2_wm97xx_pdata = {
-	.batt_pdata	= &palmte2_batt_pdata,
-};
-
-static pxa2xx_audio_ops_t palmte2_ac97_pdata = {
-	.codec_pdata	= { &palmte2_wm97xx_pdata, },
-};
-
-static struct palm27x_asoc_info palmte2_asoc_pdata = {
-	.jack_gpio	= GPIO_NR_PALMTE2_EARPHONE_DETECT,
-};
-
-static struct platform_device palmte2_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palmte2_asoc_pdata,
-	},
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmte2_lcd_modes[] = {
-{
-	.pixclock	= 77757,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 28,
-	.right_margin	= 7,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmte2_lcd_screen = {
-	.modes		= palmte2_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmte2_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-	&palmte2_pxa_keys,
-#endif
-	&palmte2_backlight,
-	&power_supply,
-	&palmte2_asoc,
-	&palmte2_gpio_vbus,
-};
-
-/* setup udc GPIOs initial state */
-static void __init palmte2_udc_init(void)
-{
-	if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_PALMTE2_USB_PULLUP);
-	}
-}
-
-static void __init palmte2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_fb_info(NULL, &palmte2_lcd_screen);
-	gpiod_add_lookup_table(&palmte2_mci_gpio_table);
-	pxa_set_mci_info(&palmte2_mci_platform_data);
-	palmte2_udc_init();
-	pxa_set_ac97_info(&palmte2_ac97_pdata);
-	pxa_set_ficp_info(&palmte2_ficp_platform_data);
-
-	pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup));
-	gpiod_add_lookup_table(&palmte2_udc_gpiod_table);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(PALMTE2, "Palm Tungsten|E2")
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmte2_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmte2.h b/arch/arm/mach-pxa/palmte2.h
deleted file mode 100644
index 2589400c1a2f..000000000000
--- a/arch/arm/mach-pxa/palmte2.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer
- *
- * Author:
- *		Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
- */
-
-#ifndef _INCLUDE_PALMTE2_H_
-#define _INCLUDE_PALMTE2_H_
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMTE2_POWER_DETECT		9
-#define GPIO_NR_PALMTE2_HOTSYNC_BUTTON_N	4
-#define GPIO_NR_PALMTE2_EARPHONE_DETECT		15
-
-/* SD/MMC */
-#define GPIO_NR_PALMTE2_SD_DETECT_N		10
-#define GPIO_NR_PALMTE2_SD_POWER		55
-#define GPIO_NR_PALMTE2_SD_READONLY		51
-
-/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMTE2_IR_DISABLE		48
-
-/* USB */
-#define GPIO_NR_PALMTE2_USB_DETECT_N		35
-#define GPIO_NR_PALMTE2_USB_PULLUP		53
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMTE2_BL_POWER		56
-#define GPIO_NR_PALMTE2_LCD_POWER		37
-
-/* KEYS */
-#define GPIO_NR_PALMTE2_KEY_NOTES	5
-#define GPIO_NR_PALMTE2_KEY_TASKS	7
-#define GPIO_NR_PALMTE2_KEY_CALENDAR	11
-#define GPIO_NR_PALMTE2_KEY_CONTACTS	13
-#define GPIO_NR_PALMTE2_KEY_CENTER	14
-#define GPIO_NR_PALMTE2_KEY_LEFT	19
-#define GPIO_NR_PALMTE2_KEY_RIGHT	20
-#define GPIO_NR_PALMTE2_KEY_DOWN	21
-#define GPIO_NR_PALMTE2_KEY_UP		22
-
-/** HERE ARE INIT VALUES **/
-
-/* BACKLIGHT */
-#define PALMTE2_MAX_INTENSITY		0xFE
-#define PALMTE2_DEFAULT_INTENSITY	0x7E
-#define PALMTE2_LIMIT_MASK		0x7F
-#define PALMTE2_PRESCALER		0x3F
-#define PALMTE2_PERIOD_NS		3500
-
-/* BATTERY */
-#define PALMTE2_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMTE2_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMTE2_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMTE2_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMTE2_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMTE2_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMTE2_MAX_LIFE_MINS		360	/* on-life in minutes */
-
-#endif
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
deleted file mode 100644
index 2bf0f7f3ea24..000000000000
--- a/arch/arm/mach-pxa/palmtreo.c
+++ /dev/null
@@ -1,548 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Palm Treo smartphones
- *
- * currently supported:
- *     Palm Treo 680 (GSM)
- *     Palm Centro 685 (GSM)
- *
- * Author:     Tomas Cech <sleep_walker@suse.cz>
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/memblock.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/power_supply.h>
-#include <linux/w1-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include "pxa27x-udc.h"
-#include <mach/audio.h>
-#include "palmtreo.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "udc.h"
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pxa2xx-regs.h>
-#include <linux/platform_data/asoc-palm27x.h>
-#include <linux/platform_data/media/camera-pxa.h>
-#include "palm27x.h"
-
-#include <sound/pxa2xx-lib.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long treo_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO113_GPIO,				/* SD detect */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* usb detect */
-
-	/* MATRIX KEYPAD */
-	GPIO101_KP_MKIN_1,
-	GPIO102_KP_MKIN_2,
-	GPIO97_KP_MKIN_3,
-	GPIO98_KP_MKIN_4,
-	GPIO91_KP_MKIN_6,
-	GPIO13_KP_MKIN_7,
-	GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO96_KP_MKOUT_6,
-	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,	/* Hotsync button */
-
-	/* Quick Capture Interface */
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO81_CIF_DD_0,
-	GPIO55_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO50_CIF_DD_3,
-	GPIO52_CIF_DD_4,
-	GPIO48_CIF_DD_5,
-	GPIO17_CIF_DD_6,
-	GPIO12_CIF_DD_7,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* GSM */
-	GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH,	/* GSM host wake up */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO39_FFUART_TXD,
-	GPIO41_FFUART_RTS,
-
-	/* MISC. */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* external power detect */
-	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,	/* silent switch */
-	GPIO116_GPIO,				/* headphone detect */
-	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* bluetooth host wake up */
-};
-
-#ifdef CONFIG_MACH_TREO680
-static unsigned long treo680_pin_config[] __initdata = {
-	GPIO33_GPIO,    /* SD read only */
-
-	/* MATRIX KEYPAD - different wake up source */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO99_KP_MKIN_5,
-
-	/* LCD... L_BIAS alt fn not configured on Treo680; is GPIO instead */
-	GPIOxx_LCD_16BPP,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static unsigned long centro685_pin_config[] __initdata = {
-	/* Bluetooth attached to BT UART*/
-	MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW),    /* power: LOW = off */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* MATRIX KEYPAD - different wake up source */
-	GPIO100_KP_MKIN_0,
-	GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-};
-#endif /* CONFIG_MACH_CENTRO */
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if IS_ENABLED(CONFIG_KEYBOARD_PXA27x)
-static const unsigned int treo680_matrix_keys[] = {
-	KEY(0, 0, KEY_F8),		/* Red/Off/Power */
-	KEY(0, 1, KEY_LEFT),
-	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
-	KEY(0, 3, KEY_L),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Q),
-	KEY(0, 6, KEY_P),
-
-	KEY(1, 0, KEY_RIGHTCTRL),	/* Menu */
-	KEY(1, 1, KEY_RIGHT),
-	KEY(1, 2, KEY_LEFTSHIFT),	/* Left shift */
-	KEY(1, 3, KEY_Z),
-	KEY(1, 4, KEY_S),
-	KEY(1, 5, KEY_W),
-
-	KEY(2, 0, KEY_F1),		/* Phone */
-	KEY(2, 1, KEY_UP),
-	KEY(2, 2, KEY_0),
-	KEY(2, 3, KEY_X),
-	KEY(2, 4, KEY_D),
-	KEY(2, 5, KEY_E),
-
-	KEY(3, 0, KEY_F10),		/* Calendar */
-	KEY(3, 1, KEY_DOWN),
-	KEY(3, 2, KEY_SPACE),
-	KEY(3, 3, KEY_C),
-	KEY(3, 4, KEY_F),
-	KEY(3, 5, KEY_R),
-
-	KEY(4, 0, KEY_F12),		/* Mail */
-	KEY(4, 1, KEY_KPENTER),
-	KEY(4, 2, KEY_RIGHTALT),	/* Alt */
-	KEY(4, 3, KEY_V),
-	KEY(4, 4, KEY_G),
-	KEY(4, 5, KEY_T),
-
-	KEY(5, 0, KEY_F9),		/* Home */
-	KEY(5, 1, KEY_PAGEUP),		/* Side up */
-	KEY(5, 2, KEY_DOT),
-	KEY(5, 3, KEY_B),
-	KEY(5, 4, KEY_H),
-	KEY(5, 5, KEY_Y),
-
-	KEY(6, 0, KEY_TAB),		/* Side Activate */
-	KEY(6, 1, KEY_PAGEDOWN),	/* Side down */
-	KEY(6, 2, KEY_ENTER),
-	KEY(6, 3, KEY_N),
-	KEY(6, 4, KEY_J),
-	KEY(6, 5, KEY_U),
-
-	KEY(7, 0, KEY_F6),		/* Green/Call */
-	KEY(7, 1, KEY_O),
-	KEY(7, 2, KEY_BACKSPACE),
-	KEY(7, 3, KEY_M),
-	KEY(7, 4, KEY_K),
-	KEY(7, 5, KEY_I),
-};
-
-static const unsigned int centro_matrix_keys[] = {
-	KEY(0, 0, KEY_F9),		/* Home */
-	KEY(0, 1, KEY_LEFT),
-	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
-	KEY(0, 3, KEY_L),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Q),
-	KEY(0, 6, KEY_P),
-
-	KEY(1, 0, KEY_RIGHTCTRL),	/* Menu */
-	KEY(1, 1, KEY_RIGHT),
-	KEY(1, 2, KEY_LEFTSHIFT),	/* Left shift */
-	KEY(1, 3, KEY_Z),
-	KEY(1, 4, KEY_S),
-	KEY(1, 5, KEY_W),
-
-	KEY(2, 0, KEY_F1),		/* Phone */
-	KEY(2, 1, KEY_UP),
-	KEY(2, 2, KEY_0),
-	KEY(2, 3, KEY_X),
-	KEY(2, 4, KEY_D),
-	KEY(2, 5, KEY_E),
-
-	KEY(3, 0, KEY_F10),		/* Calendar */
-	KEY(3, 1, KEY_DOWN),
-	KEY(3, 2, KEY_SPACE),
-	KEY(3, 3, KEY_C),
-	KEY(3, 4, KEY_F),
-	KEY(3, 5, KEY_R),
-
-	KEY(4, 0, KEY_F12),		/* Mail */
-	KEY(4, 1, KEY_KPENTER),
-	KEY(4, 2, KEY_RIGHTALT),	/* Alt */
-	KEY(4, 3, KEY_V),
-	KEY(4, 4, KEY_G),
-	KEY(4, 5, KEY_T),
-
-	KEY(5, 0, KEY_F8),		/* Red/Off/Power */
-	KEY(5, 1, KEY_PAGEUP),		/* Side up */
-	KEY(5, 2, KEY_DOT),
-	KEY(5, 3, KEY_B),
-	KEY(5, 4, KEY_H),
-	KEY(5, 5, KEY_Y),
-
-	KEY(6, 0, KEY_TAB),		/* Side Activate */
-	KEY(6, 1, KEY_PAGEDOWN),	/* Side down */
-	KEY(6, 2, KEY_ENTER),
-	KEY(6, 3, KEY_N),
-	KEY(6, 4, KEY_J),
-	KEY(6, 5, KEY_U),
-
-	KEY(7, 0, KEY_F6),		/* Green/Call */
-	KEY(7, 1, KEY_O),
-	KEY(7, 2, KEY_BACKSPACE),
-	KEY(7, 3, KEY_M),
-	KEY(7, 4, KEY_K),
-	KEY(7, 5, KEY_I),
-};
-
-static struct matrix_keymap_data treo680_matrix_keymap_data = {
-	.keymap			= treo680_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(treo680_matrix_keys),
-};
-
-static struct matrix_keymap_data centro_matrix_keymap_data = {
-	.keymap			= centro_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(centro_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data treo680_keypad_pdata = {
-	.matrix_key_rows	= 8,
-	.matrix_key_cols	= 7,
-	.matrix_keymap_data	= &treo680_matrix_keymap_data,
-	.direct_key_map		= { KEY_CONNECT },
-	.direct_key_num		= 1,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmtreo_kpc_init(void)
-{
-	static struct pxa27x_keypad_platform_data *data = &treo680_keypad_pdata;
-
-	if (machine_is_centro())
-		data->matrix_keymap_data = &centro_matrix_keymap_data;
-
-	pxa_set_keypad_info(&treo680_keypad_pdata);
-}
-#else
-static inline void palmtreo_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB host
- ******************************************************************************/
-#if IS_ENABLED(CONFIG_USB_OHCI_HCD)
-static struct pxaohci_platform_data treo680_ohci_info = {
-	.port_mode    = PMM_PERPORT_MODE,
-	.flags        = ENABLE_PORT1 | ENABLE_PORT3,
-	.power_budget = 0,
-};
-
-static void __init palmtreo_uhc_init(void)
-{
-	if (machine_is_treo680())
-		pxa_set_ohci_info(&treo680_ohci_info);
-}
-#else
-static inline void palmtreo_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * Vibra and LEDs
- ******************************************************************************/
-static struct gpio_led treo680_gpio_leds[] = {
-	{
-		.name			= "treo680:vibra:vibra",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_TREO680_VIBRATE_EN,
-	},
-	{
-		.name			= "treo680:green:led",
-		.default_trigger	= "mmc0",
-		.gpio			= GPIO_NR_TREO_GREEN_LED,
-	},
-	{
-		.name			= "treo680:white:keybbl",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_TREO680_KEYB_BL,
-	},
-};
-
-static struct gpio_led_platform_data treo680_gpio_led_info = {
-	.leds		= treo680_gpio_leds,
-	.num_leds	= ARRAY_SIZE(treo680_gpio_leds),
-};
-
-static struct gpio_led centro_gpio_leds[] = {
-	{
-		.name			= "centro:vibra:vibra",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_CENTRO_VIBRATE_EN,
-	},
-	{
-		.name			= "centro:green:led",
-		.default_trigger	= "mmc0",
-		.gpio			= GPIO_NR_TREO_GREEN_LED,
-	},
-	{
-		.name			= "centro:white:keybbl",
-		.default_trigger	= "none",
-		.active_low		= 1,
-		.gpio			= GPIO_NR_CENTRO_KEYB_BL,
-	},
-};
-
-static struct gpio_led_platform_data centro_gpio_led_info = {
-	.leds		= centro_gpio_leds,
-	.num_leds	= ARRAY_SIZE(centro_gpio_leds),
-};
-
-static struct platform_device palmtreo_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-};
-
-static void __init palmtreo_leds_init(void)
-{
-	if (machine_is_centro())
-		palmtreo_leds.dev.platform_data = &centro_gpio_led_info;
-	else if (machine_is_treo680())
-		palmtreo_leds.dev.platform_data = &treo680_gpio_led_info;
-
-	platform_device_register(&palmtreo_leds);
-}
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init treo_reserve(void)
-{
-	memblock_reserve(0xa0000000, 0x1000);
-	memblock_reserve(0xa2000000, 0x1000);
-}
-
-static void __init palmphone_common_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	palm27x_pm_init(TREO_STR_BASE);
-	palm27x_lcd_init(GPIO_NR_TREO_BL_POWER, &palm_320x320_new_lcd_mode);
-	palm27x_udc_init(GPIO_NR_TREO_USB_DETECT, GPIO_NR_TREO_USB_PULLUP, 1);
-	palm27x_irda_init(GPIO_NR_TREO_IR_EN);
-	palm27x_ac97_init(-1, -1, -1, 95);
-	palm27x_pwm_init(GPIO_NR_TREO_BL_POWER, -1);
-	palm27x_power_init(GPIO_NR_TREO_POWER_DETECT, -1);
-	palm27x_pmic_init();
-	palmtreo_kpc_init();
-	palmtreo_uhc_init();
-	palmtreo_leds_init();
-}
-
-#ifdef CONFIG_MACH_TREO680
-void __init treo680_gpio_init(void)
-{
-	unsigned int gpio;
-
-	/* drive all three lcd gpios high initially */
-	const unsigned long lcd_flags = GPIOF_INIT_HIGH | GPIOF_DIR_OUT;
-
-	/*
-	 * LCD GPIO initialization...
-	 */
-
-	/*
-	 * This is likely the power to the lcd.  Toggling it low/high appears to
-	 * turn the lcd off/on.  Can be toggled after lcd is initialized without
-	 * any apparent adverse effects to the lcd operation.  Note that this
-	 * gpio line is used by the lcd controller as the L_BIAS signal, but
-	 * treo680 configures it as gpio.
-	 */
-	gpio = GPIO_NR_TREO680_LCD_POWER;
-	if (gpio_request_one(gpio, lcd_flags, "LCD power") < 0)
-		goto fail;
-
-	/*
-	 * These two are called "enables", for lack of a better understanding.
-	 * If either of these are toggled after the lcd is initialized, the
-	 * image becomes degraded.  N.B. The IPL shipped with the treo
-	 * configures GPIO_NR_TREO680_LCD_EN_N as output and drives it high.  If
-	 * the IPL is ever reprogrammed, this initialization may be need to be
-	 * revisited.
-	 */
-	gpio = GPIO_NR_TREO680_LCD_EN;
-	if (gpio_request_one(gpio, lcd_flags, "LCD enable") < 0)
-		goto fail;
-	gpio = GPIO_NR_TREO680_LCD_EN_N;
-	if (gpio_request_one(gpio, lcd_flags, "LCD enable_n") < 0)
-		goto fail;
-
-	/* driving this low turns LCD on */
-	gpio_set_value(GPIO_NR_TREO680_LCD_EN_N, 0);
-
-	return;
- fail:
-	pr_err("gpio %d initialization failed\n", gpio);
-	gpio_free(GPIO_NR_TREO680_LCD_POWER);
-	gpio_free(GPIO_NR_TREO680_LCD_EN);
-	gpio_free(GPIO_NR_TREO680_LCD_EN_N);
-}
-
-static struct gpiod_lookup_table treo680_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO680_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO680_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init treo680_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
-	palmphone_common_init();
-	treo680_gpio_init();
-	palm27x_mmc_init(&treo680_mci_gpio_table);
-}
-#endif
-
-#ifdef CONFIG_MACH_CENTRO
-
-static struct gpiod_lookup_table centro685_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_CENTRO_SD_POWER,
-			    "power", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init centro_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
-	palmphone_common_init();
-	palm27x_mmc_init(&centro685_mci_gpio_table);
-}
-#endif
-
-#ifdef CONFIG_MACH_TREO680
-MACHINE_START(TREO680, "Palm Treo 680")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.reserve	= treo_reserve,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = treo680_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_CENTRO
-MACHINE_START(CENTRO, "Palm Centro 685")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.reserve	= treo_reserve,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= centro_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-pxa/palmtreo.h b/arch/arm/mach-pxa/palmtreo.h
deleted file mode 100644
index 5715cd505424..000000000000
--- a/arch/arm/mach-pxa/palmtreo.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm Treo smartphones
- *
- * currently supported:
- *     Palm Treo 680 (GSM)
- *     Palm Centro 685 (GSM)
- *
- * Author:     Tomas Cech <sleep_walker@suse.cz>
- *
- * find more info at www.hackndev.com
- */
-
-#ifndef _INCLUDE_TREO_H_
-#define _INCLUDE_TREO_H_
-
-/* GPIOs */
-#define GPIO_NR_TREO_POWER_DETECT	0
-#define GPIO_NR_TREO_AMP_EN		27
-#define GPIO_NR_TREO_GREEN_LED	20
-#define GPIO_NR_TREO_RED_LED		79
-#define GPIO_NR_TREO_SD_DETECT_N	113
-#define GPIO_NR_TREO_EP_DETECT_N	116
-#define GPIO_NR_TREO_USB_DETECT	1
-#define GPIO_NR_TREO_USB_PULLUP	114
-#define GPIO_NR_TREO_GSM_POWER	40
-#define GPIO_NR_TREO_GSM_RESET	87
-#define GPIO_NR_TREO_GSM_WAKE	57
-#define GPIO_NR_TREO_GSM_HOST_WAKE	14
-#define GPIO_NR_TREO_GSM_TRIGGER	10
-#define GPIO_NR_TREO_IR_EN		115
-#define GPIO_NR_TREO_IR_TXD		47
-#define GPIO_NR_TREO_BL_POWER	38
-#define GPIO_NR_TREO_LCD_POWER	25
-
-/* Treo680 specific GPIOs */
-#define GPIO_NR_TREO680_SD_READONLY	33
-#define GPIO_NR_TREO680_SD_POWER	42
-#define GPIO_NR_TREO680_VIBRATE_EN	44
-#define GPIO_NR_TREO680_KEYB_BL		24
-#define GPIO_NR_TREO680_BT_EN		43
-#define GPIO_NR_TREO680_LCD_POWER	77
-#define GPIO_NR_TREO680_LCD_EN		86
-#define GPIO_NR_TREO680_LCD_EN_N	25
-
-/* Centro685 specific GPIOs */
-#define GPIO_NR_CENTRO_SD_POWER		21
-#define GPIO_NR_CENTRO_VIBRATE_EN	22
-#define GPIO_NR_CENTRO_KEYB_BL		33
-#define GPIO_NR_CENTRO_BT_EN		80
-
-/* Various addresses  */
-#define TREO_PHYS_RAM_START	0xa0000000
-#define TREO_PHYS_IO_START	0x40000000
-#define TREO_STR_BASE	0xa2000000
-
-/* BACKLIGHT */
-#define TREO_MAX_INTENSITY		254
-#define TREO_DEFAULT_INTENSITY	160
-#define TREO_LIMIT_MASK		0x7F
-#define TREO_PRESCALER		63
-#define TREO_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
deleted file mode 100644
index 07332c92c9f7..000000000000
--- a/arch/arm/mach-pxa/palmtx.c
+++ /dev/null
@@ -1,381 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for PalmTX
- *
- * Author:     Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Alex Osborne <ato@meshy.org>
- *		Cristiano P. <cristianop@users.sourceforge.net>
- *		Jan Herman <2hp@seznam.cz>
- *		Michal Hrusecky
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include <mach/audio.h>
-#include <mach/palmtx.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "udc.h"
-#include <linux/platform_data/asoc-palm27x.h>
-#include "palm27x.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmtx_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO114_GPIO,	/* SD power */
-	GPIO115_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO40_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO13_GPIO,	/* usb detect */
-	GPIO93_GPIO,	/* usb power */
-
-	/* PCMCIA */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO94_GPIO,	/* wifi power 1 */
-	GPIO108_GPIO,	/* wifi power 2 */
-	GPIO116_GPIO,	/* wifi ready */
-
-	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-
-	/* NAND */
-	GPIO15_nCS_1,
-	GPIO18_RDY,
-
-	/* MISC. */
-	GPIO10_GPIO,	/* hotsync button */
-	GPIO12_GPIO,	/* power detect */
-	GPIO107_GPIO,	/* earphone detect */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition palmtx_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data palmtx_flash_data[] = {
-	{
-		.width		= 2,			/* bankwidth in bytes */
-		.parts		= palmtx_partitions,
-		.nr_parts	= ARRAY_SIZE(palmtx_partitions)
-	}
-};
-
-static struct resource palmtx_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_8M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device palmtx_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &palmtx_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = palmtx_flash_data,
-	},
-};
-
-static void __init palmtx_nor_init(void)
-{
-	platform_device_register(&palmtx_flash);
-}
-#else
-static inline void palmtx_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int palmtx_matrix_keys[] = {
-	KEY(0, 0, KEY_POWER),
-	KEY(0, 1, KEY_F1),
-	KEY(0, 2, KEY_ENTER),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_F3),
-	KEY(1, 2, KEY_F4),
-
-	KEY(2, 0, KEY_UP),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_RIGHT),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct matrix_keymap_data palmtx_matrix_keymap_data = {
-	.keymap			= palmtx_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmtx_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_keymap_data	= &palmtx_matrix_keymap_data,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmtx_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmtx_keypad_platform_data);
-}
-#else
-static inline void palmtx_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmtx_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
-};
-
-static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
-	.buttons	= palmtx_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmtx_pxa_buttons),
-};
-
-static struct platform_device palmtx_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmtx_pxa_keys_data,
-	},
-};
-
-static void __init palmtx_keys_init(void)
-{
-	platform_device_register(&palmtx_pxa_keys);
-}
-#else
-static inline void palmtx_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * NAND Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_PLATFORM) || \
-	defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static void palmtx_nand_cmd_ctl(struct nand_chip *this, int cmd,
-				unsigned int ctrl)
-{
-	char __iomem *nandaddr = this->legacy.IO_ADDR_W;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, PALMTX_NAND_CLE_VIRT);
-	else if (ctrl & NAND_ALE)
-		writeb(cmd, PALMTX_NAND_ALE_VIRT);
-	else
-		writeb(cmd, nandaddr);
-}
-
-static struct mtd_partition palmtx_partition_info[] = {
-	[0] = {
-		.name	= "palmtx-0",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL
-	},
-};
-
-struct platform_nand_data palmtx_nand_platdata = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.nr_partitions		= ARRAY_SIZE(palmtx_partition_info),
-		.partitions		= palmtx_partition_info,
-		.chip_delay		= 20,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= palmtx_nand_cmd_ctl,
-	},
-};
-
-static struct resource palmtx_nand_resource[] = {
-	[0]	= {
-		.start	= PXA_CS1_PHYS,
-		.end	= PXA_CS1_PHYS + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device palmtx_nand = {
-	.name		= "gen_nand",
-	.num_resources	= ARRAY_SIZE(palmtx_nand_resource),
-	.resource	= palmtx_nand_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &palmtx_nand_platdata,
-	}
-};
-
-static void __init palmtx_nand_init(void)
-{
-	platform_device_register(&palmtx_nand);
-}
-#else
-static inline void palmtx_nand_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct map_desc palmtx_io_desc[] __initdata = {
-{
-	.virtual	= (unsigned long)PALMTX_PCMCIA_VIRT,
-	.pfn		= __phys_to_pfn(PALMTX_PCMCIA_PHYS),
-	.length		= PALMTX_PCMCIA_SIZE,
-	.type		= MT_DEVICE,
-}, {
-	.virtual	= (unsigned long)PALMTX_NAND_ALE_VIRT,
-	.pfn		= __phys_to_pfn(PALMTX_NAND_ALE_PHYS),
-	.length		= SZ_1M,
-	.type		= MT_DEVICE,
-}, {
-	.virtual	= (unsigned long)PALMTX_NAND_CLE_VIRT,
-	.pfn		= __phys_to_pfn(PALMTX_NAND_CLE_PHYS),
-	.length		= SZ_1M,
-	.type		= MT_DEVICE,
-}
-};
-
-static void __init palmtx_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
-}
-
-static struct gpiod_lookup_table palmtx_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTX_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTX_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTX_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init palmtx_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(&palmtx_mci_gpio_table);
-	palm27x_pm_init(PALMTX_STR_BASE);
-	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
-	palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N,
-			GPIO_NR_PALMTX_USB_PULLUP, 1);
-	palm27x_irda_init(GPIO_NR_PALMTX_IR_DISABLE);
-	palm27x_ac97_init(PALMTX_BAT_MIN_VOLTAGE, PALMTX_BAT_MAX_VOLTAGE,
-			GPIO_NR_PALMTX_EARPHONE_DETECT, 95);
-	palm27x_pwm_init(GPIO_NR_PALMTX_BL_POWER, GPIO_NR_PALMTX_LCD_POWER);
-	palm27x_power_init(GPIO_NR_PALMTX_POWER_DETECT, -1);
-	palm27x_pmic_init();
-	palmtx_kpc_init();
-	palmtx_keys_init();
-	palmtx_nor_init();
-	palmtx_nand_init();
-}
-
-MACHINE_START(PALMTX, "Palm T|X")
-	.atag_offset	= 0x100,
-	.map_io		= palmtx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmtx_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
deleted file mode 100644
index b4a5fe02a0af..000000000000
--- a/arch/arm/mach-pxa/palmz72.c
+++ /dev/null
@@ -1,319 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Palm Zire72
- *
- * Authors:
- *	Vladimir "Farcaller" Pouzanov <farcaller@gmail.com>
- *	Sergey Lapin <slapin@ossfans.org>
- *	Alex Osborne <bobofdoom@gmail.com>
- *	Jan Herman <2hp@seznam.cz>
- *
- * Rewrite for mainline:
- *	Marek Vasut <marek.vasut@gmail.com>
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/platform_data/i2c-gpio.h>
-#include <linux/gpio/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/suspend.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include <mach/audio.h>
-#include "palmz72.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "udc.h"
-#include <linux/platform_data/asoc-palm27x.h>
-#include "palm27x.h"
-
-#include "pm.h"
-#include <linux/platform_data/media/camera-pxa.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmz72_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO115_GPIO,	/* SD RO */
-	GPIO98_GPIO,	/* SD power */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO113_AC97_nRESET,
-
-	/* IrDA */
-	GPIO49_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO15_GPIO,	/* usb detect */
-	GPIO95_GPIO,	/* usb pullup */
-
-	/* Matrix keypad */
-	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	GPIO20_GPIO,	/* bl power */
-	GPIO21_GPIO,	/* LCD border switch */
-	GPIO22_GPIO,	/* LCD border color */
-	GPIO96_GPIO,	/* lcd power */
-
-	/* PXA Camera */
-	GPIO81_CIF_DD_0,
-	GPIO48_CIF_DD_5,
-	GPIO50_CIF_DD_3,
-	GPIO51_CIF_DD_2,
-	GPIO52_CIF_DD_4,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO55_CIF_DD_1,
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-	GPIO93_CIF_DD_6,
-	GPIO108_CIF_DD_7,
-
-	GPIO56_GPIO,	/* OV9640 Powerdown */
-	GPIO57_GPIO,	/* OV9640 Reset */
-	GPIO91_GPIO,	/* OV9640 Power */
-
-	/* I2C */
-	GPIO117_GPIO,	/* I2C_SCL */
-	GPIO118_GPIO,	/* I2C_SDA */
-
-	/* Misc. */
-	GPIO0_GPIO	| WAKEUP_ON_LEVEL_HIGH,	/* power detect */
-	GPIO88_GPIO,				/* green led */
-	GPIO27_GPIO,				/* WM9712 IRQ */
-};
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int palmz72_matrix_keys[] = {
-	KEY(0, 0, KEY_POWER),
-	KEY(0, 1, KEY_F1),
-	KEY(0, 2, KEY_ENTER),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_F3),
-	KEY(1, 2, KEY_F4),
-
-	KEY(2, 0, KEY_UP),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_RIGHT),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct matrix_keymap_data almz72_matrix_keymap_data = {
-	.keymap			= palmz72_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmz72_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_keymap_data	= &almz72_matrix_keymap_data,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmz72_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmz72_keypad_platform_data);
-}
-#else
-static inline void palmz72_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "palmz72:green:led",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_PALMZ72_LED_GREEN,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device palmz72_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	}
-};
-
-static void __init palmz72_leds_init(void)
-{
-	platform_device_register(&palmz72_leds);
-}
-#else
-static inline void palmz72_leds_init(void) {}
-#endif
-
-#ifdef CONFIG_PM
-
-/* We have some black magic here
- * PalmOS ROM on recover expects special struct physical address
- * to be transferred via PSPR. Using this struct PalmOS restores
- * its state after sleep. As for Linux, we need to setup it the
- * same way. More than that, PalmOS ROM changes some values in memory.
- * For now only one location is found, which needs special treatment.
- * Thanks to Alex Osborne, Andrzej Zaborowski, and lots of other people
- * for reading backtraces for me :)
- */
-
-#define PALMZ72_SAVE_DWORD ((unsigned long *)0xc0000050)
-
-static struct palmz72_resume_info palmz72_resume_info = {
-	.magic0 = 0xb4e6,
-	.magic1 = 1,
-
-	/* reset state, MMU off etc */
-	.arm_control = 0,
-	.aux_control = 0,
-	.ttb = 0,
-	.domain_access = 0,
-	.process_id = 0,
-};
-
-static unsigned long store_ptr;
-
-/* syscore_ops for Palm Zire 72 PM */
-
-static int palmz72_pm_suspend(void)
-{
-	/* setup the resume_info struct for the original bootloader */
-	palmz72_resume_info.resume_addr = (u32) cpu_resume;
-
-	/* Storing memory touched by ROM */
-	store_ptr = *PALMZ72_SAVE_DWORD;
-
-	/* Setting PSPR to a proper value */
-	PSPR = __pa_symbol(&palmz72_resume_info);
-
-	return 0;
-}
-
-static void palmz72_pm_resume(void)
-{
-	*PALMZ72_SAVE_DWORD = store_ptr;
-}
-
-static struct syscore_ops palmz72_pm_syscore_ops = {
-	.suspend = palmz72_pm_suspend,
-	.resume = palmz72_pm_resume,
-};
-
-static int __init palmz72_pm_init(void)
-{
-	if (machine_is_palmz72()) {
-		register_syscore_ops(&palmz72_pm_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(palmz72_pm_init);
-#endif
-
-static struct gpiod_lookup_table palmz72_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_RO,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_POWER_N,
-			    "power", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init palmz72_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(&palmz72_mci_gpio_table);
-	palm27x_lcd_init(-1, &palm_320x320_lcd_mode);
-	palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N,
-			GPIO_NR_PALMZ72_USB_PULLUP, 0);
-	palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE);
-	palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE,
-			-1, 113);
-	palm27x_pwm_init(-1, -1);
-	palm27x_power_init(-1, -1);
-	palm27x_pmic_init();
-	palmz72_kpc_init();
-	palmz72_leds_init();
-}
-
-MACHINE_START(PALMZ72, "Palm Zire72")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmz72_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmz72.h b/arch/arm/mach-pxa/palmz72.h
deleted file mode 100644
index 40f3f9987983..000000000000
--- a/arch/arm/mach-pxa/palmz72.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm Zire72 Handheld Computer
- *
- * Authors:	Alex Osborne <bobofdoom@gmail.com>
- *		Jan Herman <2hp@seznam.cz>
- *		Sergey Lapin <slapin@ossfans.org>
- */
-
-#ifndef _INCLUDE_PALMZ72_H_
-#define _INCLUDE_PALMZ72_H_
-
-/* Power and control */
-#define GPIO_NR_PALMZ72_GPIO_RESET		1
-#define GPIO_NR_PALMZ72_POWER_DETECT		0
-
-/* SD/MMC */
-#define GPIO_NR_PALMZ72_SD_DETECT_N		14
-#define GPIO_NR_PALMZ72_SD_POWER_N		98
-#define GPIO_NR_PALMZ72_SD_RO			115
-
-/* Touchscreen */
-#define GPIO_NR_PALMZ72_WM9712_IRQ		27
-
-/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMZ72_IR_DISABLE		49
-
-/* USB */
-#define GPIO_NR_PALMZ72_USB_DETECT_N		15
-#define GPIO_NR_PALMZ72_USB_PULLUP		95
-
-/* LCD/Backlight */
-#define GPIO_NR_PALMZ72_BL_POWER		20
-#define GPIO_NR_PALMZ72_LCD_POWER		96
-
-/* LED */
-#define GPIO_NR_PALMZ72_LED_GREEN		88
-
-/* Bluetooth */
-#define GPIO_NR_PALMZ72_BT_POWER		17
-#define GPIO_NR_PALMZ72_BT_RESET		83
-
-/* Camera */
-#define GPIO_NR_PALMZ72_CAM_PWDN		56
-#define GPIO_NR_PALMZ72_CAM_RESET		57
-#define GPIO_NR_PALMZ72_CAM_POWER		91
-
-/** Initial values **/
-
-/* Battery */
-#define PALMZ72_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMZ72_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMZ72_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMZ72_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMZ72_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMZ72_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMZ72_MAX_LIFE_MINS		360	/* on-life in minutes */
-
-/* Backlight */
-#define PALMZ72_MAX_INTENSITY		0xFE
-#define PALMZ72_DEFAULT_INTENSITY	0x7E
-#define PALMZ72_LIMIT_MASK		0x7F
-#define PALMZ72_PRESCALER		0x3F
-#define PALMZ72_PERIOD_NS		3500
-
-#ifdef CONFIG_PM
-struct palmz72_resume_info {
-	u32 magic0;		/* 0x0 */
-	u32 magic1;		/* 0x4 */
-	u32 resume_addr;	/* 0x8 */
-	u32 pad[11];		/* 0xc..0x37 */
-	u32 arm_control;	/* 0x38 */
-	u32 aux_control;	/* 0x3c */
-	u32 ttb;		/* 0x40 */
-	u32 domain_access;	/* 0x44 */
-	u32 process_id;		/* 0x48 */
-};
-#endif
-#endif
-
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
deleted file mode 100644
index 7ff6f0d655c8..000000000000
--- a/arch/arm/mach-pxa/pcm027.c
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/pcm027.c
- *  Support for the Phytec phyCORE-PXA270 CPU card (aka PCM-027).
- *
- *  Refer
- *   http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-XScale-PXA270.html
- *  for additional hardware info
- *
- *  Author:	Juergen Kilb
- *  Created:	April 05, 2005
- *  Copyright:	Phytec Messtechnik GmbH
- *  e-Mail:	armlinux@phytec.de
- *
- *  based on Intel Mainstone Board
- *
- *  Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/max7301.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "pxa27x.h"
-#include "pcm027.h"
-#include "generic.h"
-
-/*
- * ABSTRACT:
- *
- * The PXA270 processor comes with a bunch of hardware on its silicon.
- * Not all of this hardware can be used at the same time and not all
- * is routed to module's connectors. Also it depends on the baseboard, what
- * kind of hardware can be used in which way.
- * -> So this file supports the main devices on the CPU card only!
- * Refer pcm990-baseboard.c how to extend this features to get a full
- * blown system with many common interfaces.
- *
- * The PCM-027 supports the following interfaces through its connectors and
- * will be used in pcm990-baseboard.c:
- *
- * - LCD support
- * - MMC support
- * - IDE/CF card
- * - FFUART
- * - BTUART
- * - IRUART
- * - AC97
- * - SSP
- * - SSP3
- *
- * Claimed GPIOs:
- * GPIO0 -> IRQ input from RTC
- * GPIO2 -> SYS_ENA*)
- * GPIO3 -> PWR_SCL
- * GPIO4 -> PWR_SDA
- * GPIO5 -> PowerCap0*)
- * GPIO6 -> PowerCap1*)
- * GPIO7 -> PowerCap2*)
- * GPIO8 -> PowerCap3*)
- * GPIO15 -> /CS1
- * GPIO20 -> /CS2
- * GPIO21 -> /CS3
- * GPIO33 -> /CS5 network controller select
- * GPIO52 -> IRQ from network controller
- * GPIO78 -> /CS2
- * GPIO80 -> /CS4
- * GPIO90 -> LED0
- * GPIO91 -> LED1
- * GPIO114 -> IRQ from CAN controller
- * GPIO117 -> SCL
- * GPIO118 -> SDA
- *
- * *) CPU internal use only
- */
-
-static unsigned long pcm027_pin_config[] __initdata = {
-	/* Chip Selects */
-	GPIO20_nSDCS_2,
-	GPIO21_nSDCS_3,
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,	/* Ethernet */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* GPIO */
-	GPIO52_GPIO,	/* IRQ from network controller */
-#ifdef CONFIG_LEDS_GPIO
-	GPIO90_GPIO,	/* PCM027_LED_CPU */
-	GPIO91_GPIO,	/* PCM027_LED_HEART_BEAT */
-#endif
-	GPIO114_GPIO,	/* IRQ from CAN controller */
-};
-
-/*
- * SMC91x network controller specific stuff
- */
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= PCM027_ETH_PHYS + 0x300,
-		.end	= PCM027_ETH_PHYS + PCM027_ETH_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PCM027_ETH_IRQ,
-		.end	= PCM027_ETH_IRQ,
-		/* note: smc91x's driver doesn't use the trigger bits yet */
-		.flags	= IORESOURCE_IRQ | PCM027_ETH_IRQ_EDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-/*
- * SPI host and devices
- */
-static struct pxa2xx_spi_controller pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static struct max7301_platform_data max7301_info = {
-	.base = -1,
-};
-
-/* bus_num must match id in pxa2xx_set_spi_info() call */
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "max7301",
-		.platform_data	= &max7301_info,
-		.max_speed_hz	= 13000000,
-		.bus_num	= 1,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-/*
- * NOR flash
- */
-static struct physmap_flash_data pcm027_flash_data = {
-	.width  = 4,
-};
-
-static struct resource pcm027_flash_resource = {
-	.start          = PCM027_FLASH_PHYS,
-	.end            = PCM027_FLASH_PHYS + PCM027_FLASH_SIZE - 1 ,
-	.flags          = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm027_flash = {
-	.name           = "physmap-flash",
-	.id             = 0,
-	.dev            = {
-		.platform_data  = &pcm027_flash_data,
-	},
-	.resource       = &pcm027_flash_resource,
-	.num_resources  = 1,
-};
-
-#ifdef CONFIG_LEDS_GPIO
-
-static struct gpio_led pcm027_led[] = {
-	{
-		.name = "led0:red",	/* FIXME */
-		.gpio = PCM027_LED_CPU
-	},
-	{
-		.name = "led1:green",	/* FIXME */
-		.gpio = PCM027_LED_HEARD_BEAT
-	},
-};
-
-static struct gpio_led_platform_data pcm027_led_data = {
-	.num_leds	= ARRAY_SIZE(pcm027_led),
-	.leds		= pcm027_led
-};
-
-static struct platform_device pcm027_led_dev = {
-	.name		= "leds-gpio",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &pcm027_led_data,
-	},
-};
-
-#endif /* CONFIG_LEDS_GPIO */
-
-/*
- * declare the available device resources on this board
- */
-static struct platform_device *devices[] __initdata = {
-	&smc91x_device,
-	&pcm027_flash,
-#ifdef CONFIG_LEDS_GPIO
-	&pcm027_led_dev
-#endif
-};
-
-/*
- * pcm027_init - breath some life into the board
- */
-static void __init pcm027_init(void)
-{
-	/* system bus arbiter setting
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	/* at last call the baseboard to initialize itself */
-#ifdef CONFIG_MACH_PCM990_BASEBOARD
-	pcm990_baseboard_init();
-#endif
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static void __init pcm027_map_io(void)
-{
-	pxa27x_map_io();
-
-	/* initialize sleep mode regs (wake-up sources, etc) */
-	PGSR0 = 0x01308000;
-	PGSR1 = 0x00CF0002;
-	PGSR2 = 0x0E294000;
-	PGSR3 = 0x0000C000;
-	PWER  = 0x40000000 | PWER_GPIO0 | PWER_GPIO1;
-	PRER  = 0x00000000;
-	PFER  = 0x00000003;
-}
-
-MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
-	/* Maintainer: Pengutronix */
-	.atag_offset	= 0x100,
-	.map_io		= pcm027_map_io,
-	.nr_irqs	= PCM027_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= pcm027_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.h b/arch/arm/mach-pxa/pcm027.h
deleted file mode 100644
index 0c4ab636ce4e..000000000000
--- a/arch/arm/mach-pxa/pcm027.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-pxa/include/mach/pcm027.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- */
-
-/*
- * Definitions of CPU card resources only
- */
-
-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
-
-/* phyCORE-PXA270 (PCM027) Interrupts */
-#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
-#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
-#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
-#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
-#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
-
-#define PCM027_NR_IRQS		(IRQ_BOARD_START + 32)
-
-/* I2C RTC */
-#define PCM027_RTC_IRQ_GPIO	0
-#define PCM027_RTC_IRQ		PXA_GPIO_TO_IRQ(PCM027_RTC_IRQ_GPIO)
-#define PCM027_RTC_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define ADR_PCM027_RTC		0x51	/* I2C address */
-
-/* I2C EEPROM */
-#define ADR_PCM027_EEPROM	0x54	/* I2C address */
-
-/* Ethernet chip (SMSC91C111) */
-#define PCM027_ETH_IRQ_GPIO	52
-#define PCM027_ETH_IRQ		PXA_GPIO_TO_IRQ(PCM027_ETH_IRQ_GPIO)
-#define PCM027_ETH_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM027_ETH_PHYS		PXA_CS5_PHYS
-#define PCM027_ETH_SIZE		(1*1024*1024)
-
-/* CAN controller SJA1000 (unsupported yet) */
-#define PCM027_CAN_IRQ_GPIO	114
-#define PCM027_CAN_IRQ		PXA_GPIO_TO_IRQ(PCM027_CAN_IRQ_GPIO)
-#define PCM027_CAN_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define PCM027_CAN_PHYS		0x22000000
-#define PCM027_CAN_SIZE		0x100
-
-/* SPI GPIO expander (unsupported yet) */
-#define PCM027_EGPIO_IRQ_GPIO	27
-#define PCM027_EGPIO_IRQ	PXA_GPIO_TO_IRQ(PCM027_EGPIO_IRQ_GPIO)
-#define PCM027_EGPIO_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define PCM027_EGPIO_CS		24
-/*
- * TODO: Switch this pin from dedicated usage to GPIO if
- * more than the MAX7301 device is connected to this SPI bus
- */
-#define PCM027_EGPIO_CS_MODE	GPIO24_SFRM_MD
-
-/* Flash memory */
-#define PCM027_FLASH_PHYS	0x00000000
-#define PCM027_FLASH_SIZE	0x02000000
-
-/* onboard LEDs connected to GPIO */
-#define PCM027_LED_CPU		90
-#define PCM027_LED_HEARD_BEAT	91
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own basebaord init function and call it from
- * inside pcm027_init(). This example here is for the developmen board.
- * Refer pcm990-baseboard.c
- */
-extern void pcm990_baseboard_init(void);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
deleted file mode 100644
index 8dfcc366d0fe..000000000000
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ /dev/null
@@ -1,408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  arch/arm/mach-pxa/pcm990-baseboard.c
- *  Support for the Phytec phyCORE-PXA270 Development Platform (PCM-990).
- *
- *  Refer
- *   http://www.phytec.com/products/rdk/ARM-XScale/phyCORE-XScale-PXA270.html
- *  for additional hardware info
- *
- *  Author:	Juergen Kilb
- *  Created:	April 05, 2005
- *  Copyright:	Phytec Messtechnik GmbH
- *  e-Mail:	armlinux@phytec.de
- *
- *  based on Intel Mainstone Board
- *
- *  Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
- */
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/map.h>
-#include "pxa27x.h"
-#include <mach/audio.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "pcm990_baseboard.h"
-#include <linux/platform_data/video-pxafb.h>
-
-#include "devices.h"
-#include "generic.h"
-
-static unsigned long pcm990_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	/* USB */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	/* PWM0 */
-	GPIO16_PWM0_OUT,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-};
-
-static void __iomem *pcm990_cpld_base;
-
-static u8 pcm990_cpld_readb(unsigned int reg)
-{
-	return readb(pcm990_cpld_base + reg);
-}
-
-static void pcm990_cpld_writeb(u8 value, unsigned int reg)
-{
-	writeb(value, pcm990_cpld_base + reg);
-}
-
-/*
- * pcm990_lcd_power - control power supply to the LCD
- * @on: 0 = switch off, 1 = switch on
- *
- * Called by the pxafb driver
- */
-#ifndef CONFIG_PCM990_DISPLAY_NONE
-static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on) {
-		/* enable LCD-Latches
-		 * power on LCD
-		 */
-		pcm990_cpld_writeb(PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON,
-				PCM990_CTRL_REG3);
-	} else {
-		/* disable LCD-Latches
-		 * power off LCD
-		 */
-		pcm990_cpld_writeb(0, PCM990_CTRL_REG3);
-	}
-}
-#endif
-
-#if defined(CONFIG_PCM990_DISPLAY_SHARP)
-static struct pxafb_mode_info fb_info_sharp_lq084v1dg21 = {
-	.pixclock		= 28000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 20,
-	.left_margin		= 103,
-	.right_margin		= 47,
-	.vsync_len		= 6,
-	.upper_margin		= 28,
-	.lower_margin		= 5,
-	.sync			= 0,
-	.cmap_greyscale		= 0,
-};
-
-static struct pxafb_mach_info pcm990_fbinfo __initdata = {
-	.modes			= &fb_info_sharp_lq084v1dg21,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= pcm990_lcd_power,
-};
-#elif defined(CONFIG_PCM990_DISPLAY_NEC)
-struct pxafb_mode_info fb_info_nec_nl6448bc20_18d = {
-	.pixclock		= 39720,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 32,
-	.left_margin		= 16,
-	.right_margin		= 48,
-	.vsync_len		= 2,
-	.upper_margin		= 12,
-	.lower_margin		= 17,
-	.sync			= 0,
-	.cmap_greyscale		= 0,
-};
-
-static struct pxafb_mach_info pcm990_fbinfo __initdata = {
-	.modes			= &fb_info_nec_nl6448bc20_18d,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= pcm990_lcd_power,
-};
-#endif
-
-static struct pwm_lookup pcm990_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data pcm990_backlight_data = {
-	.max_brightness	= 1023,
-	.dft_brightness	= 1023,
-};
-
-static struct platform_device pcm990_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm0.dev,
-		.platform_data = &pcm990_backlight_data,
-	},
-};
-
-/*
- * The PCM-990 development baseboard uses PCM-027's hardware in the
- * following way:
- *
- * - LCD support is in use
- *  - GPIO16 is output for back light on/off with PWM
- *  - GPIO58 ... GPIO73 are outputs for display data
- *  - GPIO74 is output output for LCDFCLK
- *  - GPIO75 is output for LCDLCLK
- *  - GPIO76 is output for LCDPCLK
- *  - GPIO77 is output for LCDBIAS
- * - MMC support is in use
- *  - GPIO32 is output for MMCCLK
- *  - GPIO92 is MMDAT0
- *  - GPIO109 is MMDAT1
- *  - GPIO110 is MMCS0
- *  - GPIO111 is MMCS1
- *  - GPIO112 is MMCMD
- * - IDE/CF card is in use
- *  - GPIO48 is output /POE
- *  - GPIO49 is output /PWE
- *  - GPIO50 is output /PIOR
- *  - GPIO51 is output /PIOW
- *  - GPIO54 is output /PCE2
- *  - GPIO55 is output /PREG
- *  - GPIO56 is input /PWAIT
- *  - GPIO57 is output /PIOS16
- *  - GPIO79 is output PSKTSEL
- *  - GPIO85 is output /PCE1
- * - FFUART is in use
- *  - GPIO34 is input FFRXD
- *  - GPIO35 is input FFCTS
- *  - GPIO36 is input FFDCD
- *  - GPIO37 is input FFDSR
- *  - GPIO38 is input FFRI
- *  - GPIO39 is output FFTXD
- *  - GPIO40 is output FFDTR
- *  - GPIO41 is output FFRTS
- * - BTUART is in use
- *  - GPIO42 is input BTRXD
- *  - GPIO43 is output BTTXD
- *  - GPIO44 is input BTCTS
- *  - GPIO45 is output BTRTS
- * - IRUART is in use
- *  - GPIO46 is input STDRXD
- *  - GPIO47 is output STDTXD
- * - AC97 is in use*)
- *  - GPIO28 is input AC97CLK
- *  - GPIO29 is input AC97DatIn
- *  - GPIO30 is output AC97DatO
- *  - GPIO31 is output AC97SYNC
- *  - GPIO113 is output AC97_RESET
- * - SSP is in use
- *  - GPIO23 is output SSPSCLK
- *  - GPIO24 is output chip select to Max7301
- *  - GPIO25 is output SSPTXD
- *  - GPIO26 is input SSPRXD
- *  - GPIO27 is input for Max7301 IRQ
- *  - GPIO53 is input SSPSYSCLK
- * - SSP3 is in use
- *  - GPIO81 is output SSPTXD3
- *  - GPIO82 is input SSPRXD3
- *  - GPIO83 is output SSPSFRM
- *  - GPIO84 is output SSPCLK3
- *
- * Otherwise claimed GPIOs:
- * GPIO1 -> IRQ from user switch
- * GPIO9 -> IRQ from power management
- * GPIO10 -> IRQ from WML9712 AC97 controller
- * GPIO11 -> IRQ from IDE controller
- * GPIO12 -> IRQ from CF controller
- * GPIO13 -> IRQ from CF controller
- * GPIO14 -> GPIO free
- * GPIO15 -> /CS1 selects baseboard's Control CPLD (U7, 16 bit wide data path)
- * GPIO19 -> GPIO free
- * GPIO20 -> /SDCS2
- * GPIO21 -> /CS3 PC card socket select
- * GPIO33 -> /CS5  network controller select
- * GPIO78 -> /CS2  (16 bit wide data path)
- * GPIO80 -> /CS4  (16 bit wide data path)
- * GPIO86 -> GPIO free
- * GPIO87 -> GPIO free
- * GPIO90 -> LED0 on CPU module
- * GPIO91 -> LED1 on CPI module
- * GPIO117 -> SCL
- * GPIO118 -> SDA
- */
-
-static unsigned long pcm990_irq_enabled;
-
-static void pcm990_mask_ack_irq(struct irq_data *d)
-{
-	int pcm990_irq = (d->irq - PCM027_IRQ(0));
-
-	pcm990_irq_enabled &= ~(1 << pcm990_irq);
-
-	pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
-}
-
-static void pcm990_unmask_irq(struct irq_data *d)
-{
-	int pcm990_irq = (d->irq - PCM027_IRQ(0));
-	u8 val;
-
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-
-	pcm990_irq_enabled |= (1 << pcm990_irq);
-
-	val = pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
-	val |= 1 << pcm990_irq;
-	pcm990_cpld_writeb(val, PCM990_CTRL_INTSETCLR);
-
-	pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
-}
-
-static struct irq_chip pcm990_irq_chip = {
-	.irq_mask_ack	= pcm990_mask_ack_irq,
-	.irq_unmask	= pcm990_unmask_irq,
-};
-
-static void pcm990_irq_handler(struct irq_desc *desc)
-{
-	unsigned int irq;
-	unsigned long pending;
-
-	pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
-	pending &= pcm990_irq_enabled;
-
-	do {
-		/* clear our parent IRQ */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = PCM027_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
-		pending &= pcm990_irq_enabled;
-	} while (pending);
-}
-
-static void __init pcm990_init_irq(void)
-{
-	int irq;
-
-	/* setup extra PCM990 irqs */
-	for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) {
-		irq_set_chip_and_handler(irq, &pcm990_irq_chip,
-					 handle_level_irq);
-		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-
-	/* disable all Interrupts */
-	pcm990_cpld_writeb(0x0, PCM990_CTRL_INTMSKENA);
-	pcm990_cpld_writeb(0xff, PCM990_CTRL_INTSETCLR);
-
-	irq_set_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler);
-	irq_set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE);
-}
-
-static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
-			void *data)
-{
-	int err;
-
-	err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, 0,
-			     "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "pcm990_mci_init: MMC/SD: can't request MMC "
-				"card detect IRQ\n");
-
-	return err;
-}
-
-static int pcm990_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	u8 val;
-
-	val = pcm990_cpld_readb(PCM990_CTRL_REG5);
-
-	if ((1 << vdd) & p_d->ocr_mask)
-		val |= PCM990_CTRL_MMC2PWR;
-	else
-		val &= ~PCM990_CTRL_MMC2PWR;
-
-	pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5);
-	return 0;
-}
-
-static void pcm990_mci_exit(struct device *dev, void *data)
-{
-	free_irq(PCM027_MMCDET_IRQ, data);
-}
-
-#define MSECS_PER_JIFFY (1000/HZ)
-
-static struct pxamci_platform_data pcm990_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init 			= pcm990_mci_init,
-	.setpower 		= pcm990_mci_setpower,
-	.exit			= pcm990_mci_exit,
-};
-
-static struct pxaohci_platform_data pcm990_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.power_on_delay	= 10,
-};
-
-/*
- * system init for baseboard usage. Will be called by pcm027 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init pcm990_baseboard_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
-
-	pcm990_cpld_base = ioremap(PCM990_CTRL_PHYS, PCM990_CTRL_SIZE);
-	if (!pcm990_cpld_base) {
-		pr_err("pcm990: failed to ioremap cpld\n");
-		return;
-	}
-
-	/* register CPLD's IRQ controller */
-	pcm990_init_irq();
-
-#ifndef CONFIG_PCM990_DISPLAY_NONE
-	pxa_set_fb_info(NULL, &pcm990_fbinfo);
-#endif
-	pwm_add_table(pcm990_pwm_lookup, ARRAY_SIZE(pcm990_pwm_lookup));
-	platform_device_register(&pcm990_backlight_device);
-
-	/* MMC */
-	pxa_set_mci_info(&pcm990_mci_platform_data);
-
-	/* USB host */
-	pxa_set_ohci_info(&pcm990_ohci_platform_data);
-
-	pxa_set_i2c_info(NULL);
-	pxa_set_ac97_info(NULL);
-
-	printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
-}
diff --git a/arch/arm/mach-pxa/pcm990_baseboard.h b/arch/arm/mach-pxa/pcm990_baseboard.h
deleted file mode 100644
index 5be11d1b7019..000000000000
--- a/arch/arm/mach-pxa/pcm990_baseboard.h
+++ /dev/null
@@ -1,199 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- */
-
-#include "pcm027.h"
-#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
-
-/*
- * definitions relevant only when the PCM-990
- * development base board is in use
- */
-
-/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
-#define PCM990_CTRL_INT_IRQ_GPIO	9
-#define PCM990_CTRL_INT_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO)
-#define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
-#define PCM990_CTRL_SIZE		(1*1024*1024)
-
-#define PCM990_CTRL_PWR_IRQ_GPIO	14
-#define PCM990_CTRL_PWR_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_PWR_IRQ_GPIO)
-#define PCM990_CTRL_PWR_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-/* visible CPLD (U7) registers */
-#define PCM990_CTRL_REG0	0x0000	/* RESET REGISTER */
-#define PCM990_CTRL_SYSRES	0x0001	/* System RESET REGISTER */
-#define PCM990_CTRL_RESOUT	0x0002	/* RESETOUT Enable REGISTER */
-#define PCM990_CTRL_RESGPIO	0x0004	/* RESETGPIO Enable REGISTER */
-
-#define PCM990_CTRL_REG1	0x0002	/* Power REGISTER */
-#define PCM990_CTRL_5VOFF	0x0001	/* Disable  5V Regulators */
-#define PCM990_CTRL_CANPWR	0x0004	/* Enable CANPWR ADUM */
-#define PCM990_CTRL_PM_5V	0x0008	/* Read 5V OK */
-
-#define PCM990_CTRL_REG2	0x0004	/* LED REGISTER */
-#define PCM990_CTRL_LEDPWR	0x0001	/* POWER LED enable */
-#define PCM990_CTRL_LEDBAS	0x0002	/* BASIS LED enable */
-#define PCM990_CTRL_LEDUSR	0x0004	/* USER LED enable */
-
-#define PCM990_CTRL_REG3	0x0006	/* LCD CTRL REGISTER 3 */
-#define PCM990_CTRL_LCDPWR	0x0001	/* RW LCD Power on */
-#define PCM990_CTRL_LCDON	0x0002	/* RW LCD Latch on */
-#define PCM990_CTRL_LCDPOS1	0x0004	/* RW POS 1 */
-#define PCM990_CTRL_LCDPOS2	0x0008	/* RW POS 2 */
-
-#define PCM990_CTRL_REG4	0x0008	/* MMC1 CTRL REGISTER 4 */
-#define PCM990_CTRL_MMC1PWR	0x0001 /* RW MMC1 Power on */
-
-#define PCM990_CTRL_REG5	0x000A	/* MMC2 CTRL REGISTER 5 */
-#define PCM990_CTRL_MMC2PWR	0x0001	/* RW MMC2 Power on */
-#define PCM990_CTRL_MMC2LED	0x0002	/* RW MMC2 LED */
-#define PCM990_CTRL_MMC2DE	0x0004	/* R MMC2 Card detect */
-#define PCM990_CTRL_MMC2WP	0x0008	/* R MMC2 Card write protect */
-
-#define PCM990_CTRL_INTSETCLR	0x000C	/* Interrupt Clear REGISTER */
-#define PCM990_CTRL_INTC0	0x0001	/* Clear Reg BT Detect */
-#define PCM990_CTRL_INTC1	0x0002	/* Clear Reg FR RI */
-#define PCM990_CTRL_INTC2	0x0004	/* Clear Reg MMC1 Detect */
-#define PCM990_CTRL_INTC3	0x0008	/* Clear Reg PM_5V off */
-
-#define PCM990_CTRL_INTMSKENA	0x000E	/* Interrupt Enable REGISTER */
-#define PCM990_CTRL_ENAINT0	0x0001	/* Enable Int BT Detect */
-#define PCM990_CTRL_ENAINT1	0x0002	/* Enable Int FR RI */
-#define PCM990_CTRL_ENAINT2	0x0004	/* Enable Int MMC1 Detect */
-#define PCM990_CTRL_ENAINT3	0x0008	/* Enable Int PM_5V off */
-
-#define PCM990_CTRL_REG8	0x0014	/* Uart REGISTER */
-#define PCM990_CTRL_FFSD	0x0001	/* BT Uart Enable */
-#define PCM990_CTRL_BTSD	0x0002	/* FF Uart Enable */
-#define PCM990_CTRL_FFRI	0x0004	/* FF Uart RI detect */
-#define PCM990_CTRL_BTRX	0x0008	/* BT Uart Rx detect */
-
-#define PCM990_CTRL_REG9	0x0010	/* AC97 Flash REGISTER */
-#define PCM990_CTRL_FLWP	0x0001	/* pC Flash Write Protect */
-#define PCM990_CTRL_FLDIS	0x0002	/* pC Flash Disable */
-#define PCM990_CTRL_AC97ENA	0x0004	/* Enable AC97 Expansion */
-
-#define PCM990_CTRL_REG10	0x0012	/* GPS-REGISTER */
-#define PCM990_CTRL_GPSPWR	0x0004	/* GPS-Modul Power on */
-#define PCM990_CTRL_GPSENA	0x0008	/* GPS-Modul Enable */
-
-#define PCM990_CTRL_REG11	0x0014	/* Accu REGISTER */
-#define PCM990_CTRL_ACENA	0x0001	/* Charge Enable */
-#define PCM990_CTRL_ACSEL	0x0002	/* Charge Akku -> DC Enable */
-#define PCM990_CTRL_ACPRES	0x0004	/* DC Present */
-#define PCM990_CTRL_ACALARM	0x0008	/* Error Akku */
-
-/*
- * IDE
- */
-#define PCM990_IDE_IRQ_GPIO	13
-#define PCM990_IDE_IRQ		PXA_GPIO_TO_IRQ(PCM990_IDE_IRQ_GPIO)
-#define PCM990_IDE_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM990_IDE_PLD_PHYS	0x20000000	/* 16 bit wide */
-#define PCM990_IDE_PLD_BASE	0xee000000
-#define PCM990_IDE_PLD_SIZE	(1*1024*1024)
-
-/* visible CPLD (U6) registers */
-#define PCM990_IDE_PLD_REG0	0x1000	/* OFFSET IDE REGISTER 0 */
-#define PCM990_IDE_PM5V		0x0004	/* R System VCC_5V */
-#define PCM990_IDE_STBY		0x0008	/* R System StandBy */
-
-#define PCM990_IDE_PLD_REG1	0x1002	/* OFFSET IDE REGISTER 1 */
-#define PCM990_IDE_IDEMODE	0x0001	/* R TrueIDE Mode */
-#define PCM990_IDE_DMAENA	0x0004	/* RW DMA Enable */
-#define PCM990_IDE_DMA1_0	0x0008	/* RW 1=DREQ1 0=DREQ0 */
-
-#define PCM990_IDE_PLD_REG2	0x1004	/* OFFSET IDE REGISTER 2 */
-#define PCM990_IDE_RESENA	0x0001	/* RW IDE Reset Bit enable */
-#define PCM990_IDE_RES		0x0002	/* RW IDE Reset Bit */
-#define PCM990_IDE_RDY		0x0008	/* RDY */
-
-#define PCM990_IDE_PLD_REG3	0x1006	/* OFFSET IDE REGISTER 3 */
-#define PCM990_IDE_IDEOE	0x0001	/* RW Latch on Databus */
-#define PCM990_IDE_IDEON	0x0002	/* RW Latch on Control Address */
-#define PCM990_IDE_IDEIN	0x0004	/* RW Latch on Interrupt usw. */
-
-#define PCM990_IDE_PLD_REG4	0x1008	/* OFFSET IDE REGISTER 4 */
-#define PCM990_IDE_PWRENA	0x0001	/* RW IDE Power enable */
-#define PCM990_IDE_5V		0x0002	/* R IDE Power 5V */
-#define PCM990_IDE_PWG		0x0008	/* R IDE Power is on */
-
-#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
-#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
-
-/*
- * Compact Flash
- */
-#define PCM990_CF_IRQ_GPIO	11
-#define PCM990_CF_IRQ		PXA_GPIO_TO_IRQ(PCM990_CF_IRQ_GPIO)
-#define PCM990_CF_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-#define PCM990_CF_CD_GPIO	12
-#define PCM990_CF_CD		PXA_GPIO_TO_IRQ(PCM990_CF_CD_GPIO)
-#define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
-
-#define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
-
-/* visible CPLD (U6) registers */
-#define PCM990_CF_PLD_REG0	0x1000	/* OFFSET CF REGISTER 0 */
-#define PCM990_CF_REG0_LED	0x0001	/* RW LED on */
-#define PCM990_CF_REG0_BLK	0x0002	/* RW LED flash when access */
-#define PCM990_CF_REG0_PM5V	0x0004	/* R System VCC_5V enable */
-#define PCM990_CF_REG0_STBY	0x0008	/* R System StandBy */
-
-#define PCM990_CF_PLD_REG1	0x1002	/* OFFSET CF REGISTER 1 */
-#define PCM990_CF_REG1_IDEMODE	0x0001	/* RW CF card run as TrueIDE */
-#define PCM990_CF_REG1_CF0	0x0002	/* RW CF card at ADDR 0x28000000 */
-
-#define PCM990_CF_PLD_REG2	0x1004	/* OFFSET CF REGISTER 2 */
-#define PCM990_CF_REG2_RES	0x0002	/* RW CF RESET BIT */
-#define PCM990_CF_REG2_RDYENA	0x0004	/* RW Enable CF_RDY */
-#define PCM990_CF_REG2_RDY	0x0008	/* R CF_RDY auf PWAIT */
-
-#define PCM990_CF_PLD_REG3	0x1006	/* OFFSET CF REGISTER 3 */
-#define PCM990_CF_REG3_CFOE	0x0001	/* RW Latch on Databus */
-#define PCM990_CF_REG3_CFON	0x0002	/* RW Latch on Control Address */
-#define PCM990_CF_REG3_CFIN	0x0004	/* RW Latch on Interrupt usw. */
-#define PCM990_CF_REG3_CFCD	0x0008	/* RW Latch on CD1/2 VS1/2 usw */
-
-#define PCM990_CF_PLD_REG4	0x1008	/* OFFSET CF REGISTER 4 */
-#define PCM990_CF_REG4_PWRENA	0x0001	/* RW CF Power on (CD1/2 = "00") */
-#define PCM990_CF_REG4_5_3V	0x0002	/* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
-#define PCM990_CF_REG4_3B	0x0004	/* RW 3.0V Backup from VCC (5_3V=0) */
-#define PCM990_CF_REG4_PWG	0x0008	/* R CF-Power is on */
-
-#define PCM990_CF_PLD_REG5	0x100A	/* OFFSET CF REGISTER 5 */
-#define PCM990_CF_REG5_BVD1	0x0001	/* R CF /BVD1 */
-#define PCM990_CF_REG5_BVD2	0x0002	/* R CF /BVD2 */
-#define PCM990_CF_REG5_VS1	0x0004	/* R CF /VS1 */
-#define PCM990_CF_REG5_VS2	0x0008	/* R CF /VS2 */
-
-#define PCM990_CF_PLD_REG6	0x100C	/* OFFSET CF REGISTER 6 */
-#define PCM990_CF_REG6_CD1	0x0001	/* R CF Card_Detect1 */
-#define PCM990_CF_REG6_CD2	0x0002	/* R CF Card_Detect2 */
-
-/*
- * Wolfson AC97 Touch
- */
-#define PCM990_AC97_IRQ_GPIO	10
-#define PCM990_AC97_IRQ		PXA_GPIO_TO_IRQ(PCM990_AC97_IRQ_GPIO)
-#define PCM990_AC97_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-/*
- * MMC phyCORE
- */
-#define PCM990_MMC0_IRQ_GPIO	9
-#define PCM990_MMC0_IRQ		PXA_GPIO_TO_IRQ(PCM990_MMC0_IRQ_GPIO)
-#define PCM990_MMC0_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-
-/*
- * USB phyCore
- */
-#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
-#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index f2237f471750..c63e854921ea 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -51,8 +51,6 @@ int pxa_pm_enter(suspend_state_t state)
 		/* if invalid, display message and wait for a hardware reset */
 		if (checksum != sleep_save_checksum) {
 
-			lubbock_set_hexled(0xbadbadc5);
-
 			while (1)
 				pxa_cpu_pm_fns->enter(state);
 		}
diff --git a/arch/arm/mach-pxa/pm.h b/arch/arm/mach-pxa/pm.h
index 00ea3529e30e..a16fa140883c 100644
--- a/arch/arm/mach-pxa/pm.h
+++ b/arch/arm/mach-pxa/pm.h
@@ -27,13 +27,3 @@ extern void pxa_pm_finish(void);
 
 extern const char pm_enter_standby_start[], pm_enter_standby_end[];
 extern int pxa3xx_finish_suspend(unsigned long);
-
-/* NOTE: this is for PM debugging on Lubbock,  it's really a big
- * ugly, but let's keep the crap minimum here, instead of direct
- * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c
- */
-#ifdef CONFIG_ARCH_LUBBOCK
-extern void lubbock_set_hexled(uint32_t value);
-#else
-#define lubbock_set_hexled(x)
-#endif
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
deleted file mode 100644
index 3a4ecc3c8f8b..000000000000
--- a/arch/arm/mach-pxa/poodle.c
+++ /dev/null
@@ -1,471 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/poodle.c
- *
- *  Support for the SHARP Poodle Board.
- *
- * Based on:
- *  linux/arch/arm/mach-pxa/lubbock.c Author:	Nicolas Pitre
- *
- * Change Log
- *  12-Dec-2002 Sharp Corporation for Poodle
- *  John Lenz <lenz@cs.wisc.edu> updates to 2.6
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/pm.h>
-#include <linux/delay.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/regulator/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mtd/sharpsl.h>
-#include <linux/memblock.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "pxa25x.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
-#include <mach/poodle.h>
-#include <linux/platform_data/video-pxafb.h>
-
-#include <asm/hardware/scoop.h>
-#include <asm/hardware/locomo.h>
-#include <asm/mach/sharpsl_param.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long poodle_pin_config[] __initdata = {
-	/* I/O */
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-	GPIO18_RDY,
-
-	/* Clock */
-	GPIO12_32KHz,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO24_GPIO,	/* POODLE_GPIO_TP_CS - SFRM as chip select */
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
-
-	/* Infra-Red */
-	GPIO47_FICP_TXD,
-	GPIO46_FICP_RXD,
-
-	/* FFUART */
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-	GPIO39_FFUART_TXD,
-	GPIO37_FFUART_DSR,
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* GPIO */
-	GPIO9_GPIO,	/* POODLE_GPIO_nSD_DETECT */
-	GPIO7_GPIO,	/* POODLE_GPIO_nSD_WP */
-	GPIO3_GPIO,	/* POODLE_GPIO_SD_PWR */
-	GPIO33_GPIO,	/* POODLE_GPIO_SD_PWR1 */
-
-	GPIO20_GPIO,	/* POODLE_GPIO_USB_PULLUP */
-	GPIO22_GPIO,	/* POODLE_GPIO_IR_ON */
-};
-
-static struct resource poodle_scoop_resources[] = {
-	[0] = {
-		.start		= 0x10800000,
-		.end		= 0x10800fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config poodle_scoop_setup = {
-	.io_dir		= POODLE_SCOOP_IO_DIR,
-	.io_out		= POODLE_SCOOP_IO_OUT,
-	.gpio_base	= POODLE_SCOOP_GPIO_BASE,
-};
-
-struct platform_device poodle_scoop_device = {
-	.name		= "sharp-scoop",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &poodle_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(poodle_scoop_resources),
-	.resource	= poodle_scoop_resources,
-};
-
-static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
-{
-	.dev        = &poodle_scoop_device.dev,
-	.irq        = POODLE_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = POODLE_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},
-};
-
-static struct scoop_pcmcia_config poodle_pcmcia_config = {
-	.devs         = &poodle_pcmcia_scoop[0],
-	.num_devs     = 1,
-};
-
-EXPORT_SYMBOL(poodle_scoop_device);
-
-
-static struct platform_device poodle_audio_device = {
-	.name	= "poodle-audio",
-	.id	= -1,
-};
-
-/* LoCoMo device */
-static struct resource locomo_resources[] = {
-	[0] = {
-		.start		= 0x10000000,
-		.end		= 0x10001fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= PXA_GPIO_TO_IRQ(10),
-		.end		= PXA_GPIO_TO_IRQ(10),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct locomo_platform_data locomo_info = {
-	.irq_base	= IRQ_BOARD_START,
-};
-
-struct platform_device poodle_locomo_device = {
-	.name		= "locomo",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(locomo_resources),
-	.resource	= locomo_resources,
-	.dev		= {
-		.platform_data	= &locomo_info,
-	},
-};
-
-EXPORT_SYMBOL(poodle_locomo_device);
-
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_controller poodle_spi_info = {
-	.num_chipselect	= 1,
-};
-
-static struct ads7846_platform_data poodle_ads7846_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.gpio_pendown		= POODLE_GPIO_TP_INT,
-};
-
-static struct pxa2xx_spi_chip poodle_ads7846_chip = {
-	.gpio_cs		= POODLE_GPIO_TP_CS,
-};
-
-static struct spi_board_info poodle_spi_devices[] = {
-	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 10000,
-		.bus_num	= 1,
-		.platform_data	= &poodle_ads7846_info,
-		.controller_data= &poodle_ads7846_chip,
-		.irq		= PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT),
-	},
-};
-
-static void __init poodle_init_spi(void)
-{
-	pxa2xx_set_spi_info(1, &poodle_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
-}
-#else
-static inline void poodle_init_spi(void) {}
-#endif
-
-/*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
-	if (err)
-		goto err_free_2;
-
-	err = gpio_request(POODLE_GPIO_SD_PWR1, "SD_PWR1");
-	if (err)
-		goto err_free_3;
-
-	gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
-	gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
-
-	return 0;
-
-err_free_3:
-	gpio_free(POODLE_GPIO_SD_PWR);
-err_free_2:
-	return err;
-}
-
-static int poodle_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask) {
-		gpio_set_value(POODLE_GPIO_SD_PWR, 1);
-		mdelay(2);
-		gpio_set_value(POODLE_GPIO_SD_PWR1, 1);
-	} else {
-		gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
-		gpio_set_value(POODLE_GPIO_SD_PWR, 0);
-	}
-
-	return 0;
-}
-
-static void poodle_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(POODLE_GPIO_SD_PWR1);
-	gpio_free(POODLE_GPIO_SD_PWR);
-}
-
-static struct pxamci_platform_data poodle_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= poodle_mci_init,
-	.setpower 		= poodle_mci_setpower,
-	.exit			= poodle_mci_exit,
-};
-
-static struct gpiod_lookup_table poodle_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", POODLE_GPIO_nSD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", POODLE_GPIO_nSD_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/*
- * Irda
- */
-static struct pxaficp_platform_data poodle_ficp_platform_data = {
-	.gpio_pwdown		= POODLE_GPIO_IR_ON,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-
-/*
- * USB Device Controller
- */
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	/* no connect GPIO; poodle can't tell connection status */
-	.gpio_pullup	= POODLE_GPIO_USB_PULLUP,
-};
-
-
-/* PXAFB device */
-static struct pxafb_mode_info poodle_fb_mode = {
-	.pixclock	= 144700,
-	.xres		= 320,
-	.yres		= 240,
-	.bpp		= 16,
-	.hsync_len	= 7,
-	.left_margin	= 11,
-	.right_margin	= 30,
-	.vsync_len	= 2,
-	.upper_margin	= 2,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info poodle_fb_info = {
-	.modes		= &poodle_fb_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr sharpsl_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static const char * const probes[] = {
-	"cmdlinepart",
-	"ofpart",
-	"sharpslpart",
-	NULL,
-};
-
-static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
-	.badblock_pattern	= &sharpsl_bbt,
-	.part_parsers		= probes,
-};
-
-static struct resource sharpsl_nand_resources[] = {
-	{
-		.start	= 0x0C000000,
-		.end	= 0x0C000FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_nand_device = {
-	.name		= "sharpsl-nand",
-	.id		= -1,
-	.resource	= sharpsl_nand_resources,
-	.num_resources	= ARRAY_SIZE(sharpsl_nand_resources),
-	.dev.platform_data	= &sharpsl_nand_platform_data,
-};
-
-static struct mtd_partition sharpsl_rom_parts[] = {
-	{
-		.name	="Boot PROM Filesystem",
-		.offset	= 0x00120000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data sharpsl_rom_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
-};
-
-static struct resource sharpsl_rom_resources[] = {
-	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&poodle_locomo_device,
-	&poodle_scoop_device,
-	&poodle_audio_device,
-	&sharpsl_nand_device,
-	&sharpsl_rom_device,
-};
-
-static struct i2c_board_info __initdata poodle_i2c_devices[] = {
-	{ I2C_BOARD_INFO("wm8731", 0x1b) },
-};
-
-static void poodle_poweroff(void)
-{
-	pxa_restart(REBOOT_HARD, NULL);
-}
-
-static void __init poodle_init(void)
-{
-	int ret = 0;
-
-	pm_power_off = poodle_poweroff;
-
-	PCFR |= PCFR_OPDE;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_scoop_config = &poodle_pcmcia_config;
-
-	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	if (ret)
-		pr_warn("poodle: Unable to register LoCoMo device\n");
-
-	pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
-	pxa_set_udc_info(&udc_info);
-	gpiod_add_lookup_table(&poodle_mci_gpio_table);
-	pxa_set_mci_info(&poodle_mci_platform_data);
-	pxa_set_ficp_info(&poodle_ficp_platform_data);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
-	poodle_init_spi();
-	regulator_has_full_constraints();
-}
-
-static void __init fixup_poodle(struct tag *tags, char **cmdline)
-{
-	sharpsl_save_param();
-	memblock_add(0xa0000000, SZ_32M);
-}
-
-MACHINE_START(POODLE, "SHARP Poodle")
-	.fixup		= fixup_poodle,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= POODLE_NR_IRQS,	/* 4 for LoCoMo */
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= poodle_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
index d32d5c8e966f..5e5d543fdf46 100644
--- a/arch/arm/mach-pxa/pxa-dt.c
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -11,7 +11,7 @@
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/pxa-regs.h b/arch/arm/mach-pxa/pxa-regs.h
new file mode 100644
index 000000000000..ba5120c06b8a
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa-regs.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ */
+#ifndef __ASM_MACH_PXA_REGS_H
+#define __ASM_MACH_PXA_REGS_H
+
+/*
+ * Workarounds for at least 2 errata so far require this.
+ * The mapping is set in mach-pxa/generic.c.
+ */
+#define UNCACHED_PHYS_0		0xfe000000
+#define UNCACHED_PHYS_0_SIZE	0x00100000
+
+/*
+ * Intel PXA2xx internal register mapping:
+ *
+ * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
+ * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
+ * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
+ * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
+ * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
+ * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
+ * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
+ *
+ * Note that not all PXA2xx chips implement all those addresses, and the
+ * kernel only maps the minimum needed range of this mapping.
+ */
+#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
+
+#ifndef __ASSEMBLY__
+# define __REG(x)	(*((volatile u32 __iomem *)io_p2v(x)))
+
+/* With indexed regs we don't want to feed the index through io_p2v()
+   especially if it is a variable, otherwise horrible code will result. */
+# define __REG2(x,y)	\
+	(*(volatile u32 __iomem*)((u32)&__REG(x) + (y)))
+
+# define __PREG(x)	(io_v2p((u32)&(x)))
+
+#else
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 678641ab46e5..1b83be181bab 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -26,16 +26,16 @@
 #include <linux/irq.h>
 #include <linux/irqchip.h>
 #include <linux/platform_data/mmp_dma.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "pxa25x.h"
-#include <mach/reset.h>
+#include "reset.h"
 #include "pm.h"
-#include <mach/dma.h>
-#include <mach/smemc.h>
+#include "addr-map.h"
+#include "smemc.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -145,13 +145,6 @@ void __init pxa25x_init_irq(void)
 	pxa_init_irq(32, pxa25x_set_wake);
 }
 
-#ifdef CONFIG_CPU_PXA26x
-void __init pxa26x_init_irq(void)
-{
-	pxa_init_irq(32, pxa25x_set_wake);
-}
-#endif
-
 static int __init __init
 pxa25x_dt_init_irq(struct device_node *node, struct device_node *parent)
 {
@@ -240,7 +233,7 @@ static int __init pxa25x_init(void)
 
 	if (cpu_is_pxa25x()) {
 
-		reset_status = RCSR;
+		pxa_register_wdt(RCSR);
 
 		pxa25x_init_pm();
 
diff --git a/arch/arm/mach-pxa/pxa25x.h b/arch/arm/mach-pxa/pxa25x.h
index b58d0fbdb4db..eaaa87666324 100644
--- a/arch/arm/mach-pxa/pxa25x.h
+++ b/arch/arm/mach-pxa/pxa25x.h
@@ -2,9 +2,9 @@
 #ifndef __MACH_PXA25x_H
 #define __MACH_PXA25x_H
 
-#include <mach/hardware.h>
-#include <mach/pxa2xx-regs.h>
+#include "addr-map.h"
+#include "pxa2xx-regs.h"
 #include "mfp-pxa25x.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #endif /* __MACH_PXA25x_H */
diff --git a/arch/arm/mach-pxa/pxa27x-udc.h b/arch/arm/mach-pxa/pxa27x-udc.h
index faf73804697f..2d3df3b1cb68 100644
--- a/arch/arm/mach-pxa/pxa27x-udc.h
+++ b/arch/arm/mach-pxa/pxa27x-udc.h
@@ -2,6 +2,8 @@
 #ifndef _ASM_ARCH_PXA27X_UDC_H
 #define _ASM_ARCH_PXA27X_UDC_H
 
+#include "pxa-regs.h"
+
 #ifdef _ASM_ARCH_PXA25X_UDC_H
 #error You cannot include both PXA25x and PXA27x UDC support
 #endif
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index f0ba7ed24cb6..4135ba2877c4 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -23,18 +23,18 @@
 #include <linux/irq.h>
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/platform_data/mmp_dma.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include <asm/mach/map.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/suspend.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "pxa27x.h"
-#include <mach/reset.h>
+#include "reset.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include "pm.h"
-#include <mach/dma.h>
-#include <mach/smemc.h>
+#include "addr-map.h"
+#include "smemc.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -85,18 +85,6 @@ EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
  */
 static unsigned int pwrmode = PWRMODE_SLEEP;
 
-int pxa27x_set_pwrmode(unsigned int mode)
-{
-	switch (mode) {
-	case PWRMODE_SLEEP:
-	case PWRMODE_DEEPSLEEP:
-		pwrmode = mode;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
 /*
  * List of global PXA peripheral registers to preserve.
  * More ones like CP and general purpose register values are preserved
@@ -109,7 +97,7 @@ enum {
 	SLEEP_SAVE_COUNT
 };
 
-void pxa27x_cpu_pm_save(unsigned long *sleep_save)
+static void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 {
 	sleep_save[SLEEP_SAVE_MDREFR] = __raw_readl(MDREFR);
 	SAVE(PCFR);
@@ -117,7 +105,7 @@ void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 	SAVE(PSTR);
 }
 
-void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
+static void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 {
 	__raw_writel(sleep_save[SLEEP_SAVE_MDREFR], MDREFR);
 	RESTORE(PCFR);
@@ -127,14 +115,18 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 	RESTORE(PSTR);
 }
 
-void pxa27x_cpu_pm_enter(suspend_state_t state)
+static void pxa27x_cpu_pm_enter(suspend_state_t state)
 {
 	extern void pxa_cpu_standby(void);
 #ifndef CONFIG_IWMMXT
 	u64 acc0;
 
+#ifndef CONFIG_AS_IS_LLVM
 	asm volatile(".arch_extension xscale\n\t"
 		     "mra %Q0, %R0, acc0" : "=r" (acc0));
+#else
+	asm volatile("mrrc p0, 0, %Q0, %R0, c0" : "=r" (acc0));
+#endif
 #endif
 
 	/* ensure voltage-change sequencer not initiated, which hangs */
@@ -153,8 +145,12 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_MEM:
 		cpu_suspend(pwrmode, pxa27x_finish_suspend);
 #ifndef CONFIG_IWMMXT
+#ifndef CONFIG_AS_IS_LLVM
 		asm volatile(".arch_extension xscale\n\t"
 			     "mar acc0, %Q0, %R0" : "=r" (acc0));
+#else
+		asm volatile("mcrr p0, 0, %Q0, %R0, c0" :: "r" (acc0));
+#endif
 #endif
 		break;
 	}
@@ -337,7 +333,7 @@ static int __init pxa27x_init(void)
 
 	if (cpu_is_pxa27x()) {
 
-		reset_status = RCSR;
+		pxa_register_wdt(RCSR);
 
 		pxa27x_init_pm();
 
diff --git a/arch/arm/mach-pxa/pxa27x.h b/arch/arm/mach-pxa/pxa27x.h
index abdc02fb4f03..c9d9948ae7d1 100644
--- a/arch/arm/mach-pxa/pxa27x.h
+++ b/arch/arm/mach-pxa/pxa27x.h
@@ -3,10 +3,10 @@
 #define __MACH_PXA27x_H
 
 #include <linux/suspend.h>
-#include <mach/hardware.h>
-#include <mach/pxa2xx-regs.h>
+#include "addr-map.h"
+#include "pxa2xx-regs.h"
 #include "mfp-pxa27x.h"
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
 
@@ -20,7 +20,4 @@
 #define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
 #define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
 
-extern int pxa27x_set_pwrmode(unsigned int mode);
-extern void pxa27x_cpu_pm_enter(suspend_state_t state);
-
 #endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/pxa2xx-regs.h
index fa121e135915..0b7eaf6b5813 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/pxa2xx-regs.h
@@ -11,7 +11,7 @@
 #ifndef __PXA2XX_REGS_H
 #define __PXA2XX_REGS_H
 
-#include <mach/hardware.h>
+#include "pxa-regs.h"
 
 /*
  * Power Manager
@@ -136,51 +136,6 @@
 #define CKEN		io_p2v(0x41300004)  /* Clock Enable Register */
 #define OSCC		io_p2v(0x41300008)  /* Oscillator Configuration Register */
 
-#define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
-#define CCCR_L_MASK	0x001f	/* Crystal Frequency to Memory Frequency Multiplier */
-
-#define CCCR_CPDIS_BIT	(31)
-#define CCCR_PPDIS_BIT	(30)
-#define CCCR_LCD_26_BIT	(27)
-#define CCCR_A_BIT	(25)
-
-#define CCSR_N2_MASK	CCCR_N_MASK
-#define CCSR_M_MASK	CCCR_M_MASK
-#define CCSR_L_MASK	CCCR_L_MASK
-#define CCSR_N2_SHIFT	7
-
-#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
-#define CKEN_CAMERA	(24)	/* Camera Interface Clock Enable */
-#define CKEN_SSP1	(23)	/* SSP1 Unit Clock Enable */
-#define CKEN_MEMC	(22)	/* Memory Controller Clock Enable */
-#define CKEN_MEMSTK	(21)	/* Memory Stick Host Controller */
-#define CKEN_IM		(20)	/* Internal Memory Clock Enable */
-#define CKEN_KEYPAD	(19)	/* Keypad Interface Clock Enable */
-#define CKEN_USIM	(18)	/* USIM Unit Clock Enable */
-#define CKEN_MSL	(17)	/* MSL Unit Clock Enable */
-#define CKEN_LCD	(16)	/* LCD Unit Clock Enable */
-#define CKEN_PWRI2C	(15)	/* PWR I2C Unit Clock Enable */
-#define CKEN_I2C	(14)	/* I2C Unit Clock Enable */
-#define CKEN_FICP	(13)	/* FICP Unit Clock Enable */
-#define CKEN_MMC	(12)	/* MMC Unit Clock Enable */
-#define CKEN_USB	(11)	/* USB Unit Clock Enable */
-#define CKEN_ASSP	(10)	/* ASSP (SSP3) Clock Enable */
-#define CKEN_USBHOST	(10)	/* USB Host Unit Clock Enable */
-#define CKEN_OSTIMER	(9)	/* OS Timer Unit Clock Enable */
-#define CKEN_NSSP	(9)	/* NSSP (SSP2) Clock Enable */
-#define CKEN_I2S	(8)	/* I2S Unit Clock Enable */
-#define CKEN_BTUART	(7)	/* BTUART Unit Clock Enable */
-#define CKEN_FFUART	(6)	/* FFUART Unit Clock Enable */
-#define CKEN_STUART	(5)	/* STUART Unit Clock Enable */
-#define CKEN_HWUART	(4)	/* HWUART Unit Clock Enable */
-#define CKEN_SSP3	(4)	/* SSP3 Unit Clock Enable */
-#define CKEN_SSP	(3)	/* SSP Unit Clock Enable */
-#define CKEN_SSP2	(3)	/* SSP2 Unit Clock Enable */
-#define CKEN_AC97	(2)	/* AC97 Unit Clock Enable */
-#define CKEN_PWM1	(1)	/* PWM1 Clock Enable */
-#define CKEN_PWM0	(0)	/* PWM0 Clock Enable */
-
 #define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
 #define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
 
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 2d26cd2afbf3..35c23a5d73a3 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -12,11 +12,12 @@
 #include <linux/device.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
-#include <mach/pxa2xx-regs.h>
+#include "pxa2xx-regs.h"
 #include "mfp-pxa25x.h"
-#include <mach/reset.h>
-#include <linux/platform_data/irda-pxaficp.h>
+#include "generic.h"
+#include "reset.h"
+#include "smemc.h"
+#include <linux/soc/pxa/smemc.h>
 
 void pxa2xx_clear_reset_status(unsigned int mask)
 {
@@ -24,30 +25,26 @@ void pxa2xx_clear_reset_status(unsigned int mask)
 	RCSR = mask;
 }
 
-static unsigned long pxa2xx_mfp_fir[] = {
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-};
+#define MDCNFG_DRAC2(mdcnfg)	(((mdcnfg) >> 21) & 0x3)
+#define MDCNFG_DRAC0(mdcnfg)	(((mdcnfg) >> 5) & 0x3)
 
-static unsigned long pxa2xx_mfp_sir[] = {
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-};
+int pxa2xx_smemc_get_sdram_rows(void)
+{
+	static int sdram_rows;
+	unsigned int drac2 = 0, drac0 = 0;
+	u32 mdcnfg;
 
-static unsigned long pxa2xx_mfp_off[] = {
-	GPIO46_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO47_GPIO | MFP_LPM_DRIVE_LOW,
-};
+	if (sdram_rows)
+		return sdram_rows;
 
-void pxa2xx_transceiver_mode(struct device *dev, int mode)
-{
-	if (mode & IR_OFF) {
-		pxa2xx_mfp_config(pxa2xx_mfp_off, ARRAY_SIZE(pxa2xx_mfp_off));
-	} else if (mode & IR_SIRMODE) {
-		pxa2xx_mfp_config(pxa2xx_mfp_sir, ARRAY_SIZE(pxa2xx_mfp_sir));
-	} else if (mode & IR_FIRMODE) {
-		pxa2xx_mfp_config(pxa2xx_mfp_fir, ARRAY_SIZE(pxa2xx_mfp_fir));
-	} else
-		BUG();
+	mdcnfg = readl_relaxed(MDCNFG);
+
+	if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
+		drac2 = MDCNFG_DRAC2(mdcnfg);
+
+	if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1))
+		drac0 = MDCNFG_DRAC0(mdcnfg);
+
+	sdram_rows = 1 << (11 + max(drac0, drac2));
+	return sdram_rows;
 }
-EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode);
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 7f2f5a6a2263..f77ec118d5b9 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include "pxa300.h"
 
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 78abcc741df7..e372e6c118de 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/soc/pxa/cpu.h>
 
 #include "pxa320.h"
 
diff --git a/arch/arm/mach-pxa/pxa3xx-regs.h b/arch/arm/mach-pxa/pxa3xx-regs.h
new file mode 100644
index 000000000000..4b11cf81a9e6
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa3xx-regs.h
@@ -0,0 +1,134 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+ *
+ * PXA3xx specific register definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ */
+
+#ifndef __ASM_ARCH_PXA3XX_REGS_H
+#define __ASM_ARCH_PXA3XX_REGS_H
+
+#include "pxa-regs.h"
+
+/*
+ * Oscillator Configuration Register (OSCC)
+ */
+#define OSCC           io_p2v(0x41350000)  /* Oscillator Configuration Register */
+
+#define OSCC_PEN       (1 << 11)       /* 13MHz POUT */
+
+
+/*
+ * Service Power Management Unit (MPMU)
+ */
+#define PMCR		__REG(0x40F50000)	/* Power Manager Control Register */
+#define PSR		__REG(0x40F50004)	/* Power Manager S2 Status Register */
+#define PSPR		__REG(0x40F50008)	/* Power Manager Scratch Pad Register */
+#define PCFR		__REG(0x40F5000C)	/* Power Manager General Configuration Register */
+#define PWER		__REG(0x40F50010)	/* Power Manager Wake-up Enable Register */
+#define PWSR		__REG(0x40F50014)	/* Power Manager Wake-up Status Register */
+#define PECR		__REG(0x40F50018)	/* Power Manager EXT_WAKEUP[1:0] Control Register */
+#define DCDCSR		__REG(0x40F50080)	/* DC-DC Controller Status Register */
+#define PVCR		__REG(0x40F50100)	/* Power Manager Voltage Change Control Register */
+#define PCMD(x)		__REG(0x40F50110 + ((x) << 2))
+
+/*
+ * Slave Power Management Unit
+ */
+#define ASCR		__REG(0x40f40000)	/* Application Subsystem Power Status/Configuration */
+#define ARSR		__REG(0x40f40004)	/* Application Subsystem Reset Status */
+#define AD3ER		__REG(0x40f40008)	/* Application Subsystem Wake-Up from D3 Enable */
+#define AD3SR		__REG(0x40f4000c)	/* Application Subsystem Wake-Up from D3 Status */
+#define AD2D0ER		__REG(0x40f40010)	/* Application Subsystem Wake-Up from D2 to D0 Enable */
+#define AD2D0SR		__REG(0x40f40014)	/* Application Subsystem Wake-Up from D2 to D0 Status */
+#define AD2D1ER		__REG(0x40f40018)	/* Application Subsystem Wake-Up from D2 to D1 Enable */
+#define AD2D1SR		__REG(0x40f4001c)	/* Application Subsystem Wake-Up from D2 to D1 Status */
+#define AD1D0ER		__REG(0x40f40020)	/* Application Subsystem Wake-Up from D1 to D0 Enable */
+#define AD1D0SR		__REG(0x40f40024)	/* Application Subsystem Wake-Up from D1 to D0 Status */
+#define AGENP		__REG(0x40f4002c)	/* Application Subsystem General Purpose */
+#define AD3R		__REG(0x40f40030)	/* Application Subsystem D3 Configuration */
+#define AD2R		__REG(0x40f40034)	/* Application Subsystem D2 Configuration */
+#define AD1R		__REG(0x40f40038)	/* Application Subsystem D1 Configuration */
+
+/*
+ * Application Subsystem Configuration bits.
+ */
+#define ASCR_RDH		(1 << 31)
+#define ASCR_D1S		(1 << 2)
+#define ASCR_D2S		(1 << 1)
+#define ASCR_D3S		(1 << 0)
+
+/*
+ * Application Reset Status bits.
+ */
+#define ARSR_GPR		(1 << 3)
+#define ARSR_LPMR		(1 << 2)
+#define ARSR_WDT		(1 << 1)
+#define ARSR_HWR		(1 << 0)
+
+/*
+ * Application Subsystem Wake-Up bits.
+ */
+#define ADXER_WRTC		(1 << 31)	/* RTC */
+#define ADXER_WOST		(1 << 30)	/* OS Timer */
+#define ADXER_WTSI		(1 << 29)	/* Touchscreen */
+#define ADXER_WUSBH		(1 << 28)	/* USB host */
+#define ADXER_WUSB2		(1 << 26)	/* USB client 2.0 */
+#define ADXER_WMSL0		(1 << 24)	/* MSL port 0*/
+#define ADXER_WDMUX3		(1 << 23)	/* USB EDMUX3 */
+#define ADXER_WDMUX2		(1 << 22)	/* USB EDMUX2 */
+#define ADXER_WKP		(1 << 21)	/* Keypad */
+#define ADXER_WUSIM1		(1 << 20)	/* USIM Port 1 */
+#define ADXER_WUSIM0		(1 << 19)	/* USIM Port 0 */
+#define ADXER_WOTG		(1 << 16)	/* USBOTG input */
+#define ADXER_MFP_WFLASH	(1 << 15)	/* MFP: Data flash busy */
+#define ADXER_MFP_GEN12		(1 << 14)	/* MFP: MMC3/GPIO/OST inputs */
+#define ADXER_MFP_WMMC2		(1 << 13)	/* MFP: MMC2 */
+#define ADXER_MFP_WMMC1		(1 << 12)	/* MFP: MMC1 */
+#define ADXER_MFP_WI2C		(1 << 11)	/* MFP: I2C */
+#define ADXER_MFP_WSSP4		(1 << 10)	/* MFP: SSP4 */
+#define ADXER_MFP_WSSP3		(1 << 9)	/* MFP: SSP3 */
+#define ADXER_MFP_WMAXTRIX	(1 << 8)	/* MFP: matrix keypad */
+#define ADXER_MFP_WUART3	(1 << 7)	/* MFP: UART3 */
+#define ADXER_MFP_WUART2	(1 << 6)	/* MFP: UART2 */
+#define ADXER_MFP_WUART1	(1 << 5)	/* MFP: UART1 */
+#define ADXER_MFP_WSSP2		(1 << 4)	/* MFP: SSP2 */
+#define ADXER_MFP_WSSP1		(1 << 3)	/* MFP: SSP1 */
+#define ADXER_MFP_WAC97		(1 << 2)	/* MFP: AC97 */
+#define ADXER_WEXTWAKE1		(1 << 1)	/* External Wake 1 */
+#define ADXER_WEXTWAKE0		(1 << 0)	/* External Wake 0 */
+
+/*
+ * AD3R/AD2R/AD1R bits.  R2-R5 are only defined for PXA320.
+ */
+#define ADXR_L2			(1 << 8)
+#define ADXR_R5			(1 << 5)
+#define ADXR_R4			(1 << 4)
+#define ADXR_R3			(1 << 3)
+#define ADXR_R2			(1 << 2)
+#define ADXR_R1			(1 << 1)
+#define ADXR_R0			(1 << 0)
+
+/*
+ * Values for PWRMODE CP15 register
+ */
+#define PXA3xx_PM_S3D4C4	0x07	/* aka deep sleep */
+#define PXA3xx_PM_S2D3C4	0x06	/* aka sleep */
+#define PXA3xx_PM_S0D2C2	0x03	/* aka standby */
+#define PXA3xx_PM_S0D1C2	0x02	/* aka LCD refresh */
+#define PXA3xx_PM_S0D0C1	0x01
+
+/*
+ * Application Subsystem Clock
+ */
+#define ACCR		__REG(0x41340000)	/* Application Subsystem Clock Configuration Register */
+#define ACSR		__REG(0x41340004)	/* Application Subsystem Clock Status Register */
+#define AICSR		__REG(0x41340008)	/* Application Subsystem Interrupt Control/Status Register */
+#define CKENA		__REG(0x4134000C)	/* A Clock Enable Register */
+#define CKENB		__REG(0x41340010)	/* B Clock Enable Register */
+#define CKENC		__REG(0x41340024)	/* C Clock Enable Register */
+#define AC97_DIV	__REG(0x41340014)	/* AC97 clock divisor value register */
+
+#endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
deleted file mode 100644
index 4bd7da1f8657..000000000000
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ /dev/null
@@ -1,385 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/pxa3xx-ulpi.c
- *
- * code specific to pxa3xx aka Monahans
- *
- * Copyright (C) 2010 CompuLab Ltd.
- *
- * 2010-13-07: Igor Grinberg <grinberg@compulab.co.il>
- *             initial version: pxa310 USB Host mode support
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-
-#include <mach/hardware.h>
-#include "regs-u2d.h"
-#include <linux/platform_data/usb-pxa3xx-ulpi.h>
-
-struct pxa3xx_u2d_ulpi {
-	struct clk		*clk;
-	void __iomem		*mmio_base;
-
-	struct usb_phy		*otg;
-	unsigned int		ulpi_mode;
-};
-
-static struct pxa3xx_u2d_ulpi *u2d;
-
-static inline u32 u2d_readl(u32 reg)
-{
-	return __raw_readl(u2d->mmio_base + reg);
-}
-
-static inline void u2d_writel(u32 reg, u32 val)
-{
-	__raw_writel(val, u2d->mmio_base + reg);
-}
-
-#if defined(CONFIG_PXA310_ULPI)
-enum u2d_ulpi_phy_mode {
-	SYNCH		= 0,
-	CARKIT		= (1 << 0),
-	SER_3PIN	= (1 << 1),
-	SER_6PIN	= (1 << 2),
-	LOWPOWER	= (1 << 3),
-};
-
-static inline enum u2d_ulpi_phy_mode pxa310_ulpi_get_phymode(void)
-{
-	return (u2d_readl(U2DOTGUSR) >> 28) & 0xF;
-}
-
-static int pxa310_ulpi_poll(void)
-{
-	int timeout = 50000;
-
-	while (timeout--) {
-		if (!(u2d_readl(U2DOTGUCR) & U2DOTGUCR_RUN))
-			return 0;
-
-		cpu_relax();
-	}
-
-	pr_warn("%s: ULPI access timed out!\n", __func__);
-
-	return -ETIMEDOUT;
-}
-
-static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
-{
-	int err;
-
-	if (pxa310_ulpi_get_phymode() != SYNCH) {
-		pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
-		return -EBUSY;
-	}
-
-	u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | U2DOTGUCR_RNW | (reg << 16));
-	msleep(5);
-
-	err = pxa310_ulpi_poll();
-	if (err)
-		return err;
-
-	return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA;
-}
-
-static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
-{
-	if (pxa310_ulpi_get_phymode() != SYNCH) {
-		pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
-		return -EBUSY;
-	}
-
-	u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | (reg << 16) | (val << 8));
-	msleep(5);
-
-	return pxa310_ulpi_poll();
-}
-
-struct usb_phy_io_ops pxa310_ulpi_access_ops = {
-	.read	= pxa310_ulpi_read,
-	.write	= pxa310_ulpi_write,
-};
-
-static void pxa310_otg_transceiver_rtsm(void)
-{
-	u32 u2dotgcr;
-
-	/* put PHY to sync mode */
-	u2dotgcr = u2d_readl(U2DOTGCR);
-	u2dotgcr |=  U2DOTGCR_RTSM | U2DOTGCR_UTMID;
-	u2d_writel(U2DOTGCR, u2dotgcr);
-	msleep(10);
-
-	/* setup OTG sync mode */
-	u2dotgcr = u2d_readl(U2DOTGCR);
-	u2dotgcr |= U2DOTGCR_ULAF;
-	u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
-	u2d_writel(U2DOTGCR, u2dotgcr);
-}
-
-static int pxa310_start_otg_host_transcvr(struct usb_bus *host)
-{
-	int err;
-
-	pxa310_otg_transceiver_rtsm();
-
-	err = usb_phy_init(u2d->otg);
-	if (err) {
-		pr_err("OTG transceiver init failed");
-		return err;
-	}
-
-	err = otg_set_vbus(u2d->otg->otg, 1);
-	if (err) {
-		pr_err("OTG transceiver VBUS set failed");
-		return err;
-	}
-
-	err = otg_set_host(u2d->otg->otg, host);
-	if (err)
-		pr_err("OTG transceiver Host mode set failed");
-
-	return err;
-}
-
-static int pxa310_start_otg_hc(struct usb_bus *host)
-{
-	u32 u2dotgcr;
-	int err;
-
-	/* disable USB device controller */
-	u2d_writel(U2DCR, u2d_readl(U2DCR) & ~U2DCR_UDE);
-	u2d_writel(U2DOTGCR, u2d_readl(U2DOTGCR) | U2DOTGCR_UTMID);
-	u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
-
-	err = pxa310_start_otg_host_transcvr(host);
-	if (err)
-		return err;
-
-	/* set xceiver mode */
-	if (u2d->ulpi_mode & ULPI_IC_6PIN_SERIAL)
-		u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) & ~U2DP3CR_P2SS);
-	else if (u2d->ulpi_mode & ULPI_IC_3PIN_SERIAL)
-		u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) | U2DP3CR_P2SS);
-
-	/* start OTG host controller */
-	u2dotgcr = u2d_readl(U2DOTGCR) | U2DOTGCR_SMAF;
-	u2d_writel(U2DOTGCR, u2dotgcr & ~(U2DOTGCR_ULAF | U2DOTGCR_CKAF));
-
-	return 0;
-}
-
-static void pxa310_stop_otg_hc(void)
-{
-	pxa310_otg_transceiver_rtsm();
-
-	otg_set_host(u2d->otg->otg, NULL);
-	otg_set_vbus(u2d->otg->otg, 0);
-	usb_phy_shutdown(u2d->otg);
-}
-
-static void pxa310_u2d_setup_otg_hc(void)
-{
-	u32 u2dotgcr;
-
-	u2dotgcr = u2d_readl(U2DOTGCR);
-	u2dotgcr |= U2DOTGCR_ULAF | U2DOTGCR_UTMID;
-	u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
-	u2d_writel(U2DOTGCR, u2dotgcr);
-	msleep(5);
-	u2d_writel(U2DOTGCR, u2dotgcr | U2DOTGCR_ULE);
-	msleep(5);
-	u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
-}
-
-static int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
-{
-	unsigned int ulpi_mode = ULPI_OTG_DRVVBUS;
-
-	if (pdata) {
-		if (pdata->ulpi_mode & ULPI_SER_6PIN)
-			ulpi_mode |= ULPI_IC_6PIN_SERIAL;
-		else if (pdata->ulpi_mode & ULPI_SER_3PIN)
-			ulpi_mode |= ULPI_IC_3PIN_SERIAL;
-	}
-
-	u2d->ulpi_mode = ulpi_mode;
-
-	u2d->otg = otg_ulpi_create(&pxa310_ulpi_access_ops, ulpi_mode);
-	if (!u2d->otg)
-		return -ENOMEM;
-
-	u2d->otg->io_priv = u2d->mmio_base;
-
-	return 0;
-}
-
-static void pxa310_otg_exit(void)
-{
-	kfree(u2d->otg);
-}
-#else
-static inline void pxa310_u2d_setup_otg_hc(void) {}
-static inline int pxa310_start_otg_hc(struct usb_bus *host)
-{
-	return 0;
-}
-static inline void pxa310_stop_otg_hc(void) {}
-static inline int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
-{
-	return 0;
-}
-static inline void pxa310_otg_exit(void) {}
-#endif /* CONFIG_PXA310_ULPI */
-
-int pxa3xx_u2d_start_hc(struct usb_bus *host)
-{
-	int err = 0;
-
-	/* In case the PXA3xx ULPI isn't used, do nothing. */
-	if (!u2d)
-		return 0;
-
-	clk_prepare_enable(u2d->clk);
-
-	if (cpu_is_pxa310()) {
-		pxa310_u2d_setup_otg_hc();
-		err = pxa310_start_otg_hc(host);
-	}
-
-	return err;
-}
-EXPORT_SYMBOL_GPL(pxa3xx_u2d_start_hc);
-
-void pxa3xx_u2d_stop_hc(struct usb_bus *host)
-{
-	/* In case the PXA3xx ULPI isn't used, do nothing. */
-	if (!u2d)
-		return;
-
-	if (cpu_is_pxa310())
-		pxa310_stop_otg_hc();
-
-	clk_disable_unprepare(u2d->clk);
-}
-EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc);
-
-static int pxa3xx_u2d_probe(struct platform_device *pdev)
-{
-	struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
-	struct resource *r;
-	int err;
-
-	u2d = kzalloc(sizeof(*u2d), GFP_KERNEL);
-	if (!u2d)
-		return -ENOMEM;
-
-	u2d->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(u2d->clk)) {
-		dev_err(&pdev->dev, "failed to get u2d clock\n");
-		err = PTR_ERR(u2d->clk);
-		goto err_free_mem;
-	}
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r) {
-		dev_err(&pdev->dev, "no IO memory resource defined\n");
-		err = -ENODEV;
-		goto err_put_clk;
-	}
-
-        r = request_mem_region(r->start, resource_size(r), pdev->name);
-        if (!r) {
-                dev_err(&pdev->dev, "failed to request memory resource\n");
-                err = -EBUSY;
-                goto err_put_clk;
-        }
-
-	u2d->mmio_base = ioremap(r->start, resource_size(r));
-	if (!u2d->mmio_base) {
-		dev_err(&pdev->dev, "ioremap() failed\n");
-		err = -ENODEV;
-		goto err_free_res;
-	}
-
-	if (pdata->init) {
-		err = pdata->init(&pdev->dev);
-		if (err)
-			goto err_free_io;
-	}
-
-	/* Only PXA310 U2D has OTG functionality */
-	if (cpu_is_pxa310()) {
-		err = pxa310_otg_init(pdata);
-		if (err)
-			goto err_free_plat;
-	}
-
-	platform_set_drvdata(pdev, u2d);
-
-	return 0;
-
-err_free_plat:
-	if (pdata->exit)
-		pdata->exit(&pdev->dev);
-err_free_io:
-	iounmap(u2d->mmio_base);
-err_free_res:
-	release_mem_region(r->start, resource_size(r));
-err_put_clk:
-	clk_put(u2d->clk);
-err_free_mem:
-	kfree(u2d);
-	return err;
-}
-
-static int pxa3xx_u2d_remove(struct platform_device *pdev)
-{
-	struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
-	struct resource *r;
-
-	if (cpu_is_pxa310()) {
-		pxa310_stop_otg_hc();
-		pxa310_otg_exit();
-	}
-
-	if (pdata->exit)
-		pdata->exit(&pdev->dev);
-
-	platform_set_drvdata(pdev, NULL);
-	iounmap(u2d->mmio_base);
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, resource_size(r));
-
-	clk_put(u2d->clk);
-
-	kfree(u2d);
-
-	return 0;
-}
-
-static struct platform_driver pxa3xx_u2d_ulpi_driver = {
-        .driver		= {
-                .name   = "pxa3xx-u2d",
-        },
-        .probe          = pxa3xx_u2d_probe,
-        .remove         = pxa3xx_u2d_remove,
-};
-module_platform_driver(pxa3xx_u2d_ulpi_driver);
-
-MODULE_DESCRIPTION("PXA3xx U2D ULPI driver");
-MODULE_AUTHOR("Igor Grinberg");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 560160682df6..1d1e5713464d 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -24,17 +24,18 @@
 #include <linux/syscore_ops.h>
 #include <linux/platform_data/i2c-pxa.h>
 #include <linux/platform_data/mmp_dma.h>
+#include <linux/soc/pxa/cpu.h>
+#include <linux/clk/pxa.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/reset.h>
+#include "pxa3xx-regs.h"
+#include "reset.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include "pm.h"
-#include <mach/dma.h>
-#include <mach/smemc.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "smemc.h"
+#include "irqs.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -51,6 +52,10 @@ extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int));
 #define NDCR_ND_ARB_EN		(1 << 12)
 #define NDCR_ND_ARB_CNTL	(1 << 19)
 
+#define CKEN_BOOT  		11      /* < Boot rom clock enable */
+#define CKEN_TPM   		19      /* < TPM clock enable */
+#define CKEN_HSIO2 		41      /* < HSIO2 clock enable */
+
 #ifdef CONFIG_PM
 
 #define ISRAM_START	0x5c000000
@@ -103,8 +108,12 @@ static void pxa3xx_cpu_pm_suspend(void)
 #ifndef CONFIG_IWMMXT
 	u64 acc0;
 
+#ifdef CONFIG_CC_IS_GCC
 	asm volatile(".arch_extension xscale\n\t"
 		     "mra %Q0, %R0, acc0" : "=r" (acc0));
+#else
+	asm volatile("mrrc p0, 0, %Q0, %R0, c0" : "=r" (acc0));
+#endif
 #endif
 
 	/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
@@ -132,8 +141,12 @@ static void pxa3xx_cpu_pm_suspend(void)
 	AD3ER = 0;
 
 #ifndef CONFIG_IWMMXT
+#ifndef CONFIG_AS_IS_LLVM
 	asm volatile(".arch_extension xscale\n\t"
 		     "mar acc0, %Q0, %R0" : "=r" (acc0));
+#else
+	asm volatile("mcrr p0, 0, %Q0, %R0, c0" :: "r" (acc0));
+#endif
 #endif
 }
 
@@ -350,13 +363,6 @@ static void __init __pxa3xx_init_irq(void)
 	pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
 }
 
-void __init pxa3xx_init_irq(void)
-{
-	__pxa3xx_init_irq();
-	pxa_init_irq(56, pxa3xx_set_wake);
-}
-
-#ifdef CONFIG_OF
 static int __init __init
 pxa3xx_dt_init_irq(struct device_node *node, struct device_node *parent)
 {
@@ -367,7 +373,6 @@ pxa3xx_dt_init_irq(struct device_node *node, struct device_node *parent)
 	return 0;
 }
 IRQCHIP_DECLARE(pxa3xx_intc, "marvell,pxa-intc", pxa3xx_dt_init_irq);
-#endif	/* CONFIG_OF */
 
 static struct map_desc pxa3xx_io_desc[] __initdata = {
 	{	/* Mem Ctl */
@@ -390,80 +395,13 @@ void __init pxa3xx_map_io(void)
 	pxa3xx_get_clk_frequency_khz(1);
 }
 
-/*
- * device registration specific to PXA3xx.
- */
-
-void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_i2c_power, info);
-}
-
-static struct pxa_gpio_platform_data pxa3xx_gpio_pdata = {
-	.irq_base	= PXA_GPIO_TO_IRQ(0),
-};
-
-static struct platform_device *devices[] __initdata = {
-	&pxa27x_device_udc,
-	&pxa_device_pmu,
-	&pxa_device_i2s,
-	&pxa_device_asoc_ssp1,
-	&pxa_device_asoc_ssp2,
-	&pxa_device_asoc_ssp3,
-	&pxa_device_asoc_ssp4,
-	&pxa_device_asoc_platform,
-	&pxa_device_rtc,
-	&pxa3xx_device_ssp1,
-	&pxa3xx_device_ssp2,
-	&pxa3xx_device_ssp3,
-	&pxa3xx_device_ssp4,
-	&pxa27x_device_pwm0,
-	&pxa27x_device_pwm1,
-};
-
-static const struct dma_slave_map pxa3xx_slave_map[] = {
-	/* PXA25x, PXA27x and PXA3xx common entries */
-	{ "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
-	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
-	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
-	  PDMA_FILTER_PARAM(LOWEST, 10) },
-	{ "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
-	{ "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
-	{ "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
-	{ "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
-	{ "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
-	{ "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
-	{ "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
-	{ "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
-	{ "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
-	{ "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
-	{ "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) },
-	{ "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) },
-
-	/* PXA3xx specific map */
-	{ "pxa-ssp-dai.3", "rx", PDMA_FILTER_PARAM(LOWEST, 2) },
-	{ "pxa-ssp-dai.3", "tx", PDMA_FILTER_PARAM(LOWEST, 3) },
-	{ "pxa2xx-mci.1", "rx", PDMA_FILTER_PARAM(LOWEST, 93) },
-	{ "pxa2xx-mci.1", "tx", PDMA_FILTER_PARAM(LOWEST, 94) },
-	{ "pxa3xx-nand", "data", PDMA_FILTER_PARAM(LOWEST, 97) },
-	{ "pxa2xx-mci.2", "rx", PDMA_FILTER_PARAM(LOWEST, 100) },
-	{ "pxa2xx-mci.2", "tx", PDMA_FILTER_PARAM(LOWEST, 101) },
-};
-
-static struct mmp_dma_platdata pxa3xx_dma_pdata = {
-	.dma_channels	= 32,
-	.nb_requestors	= 100,
-	.slave_map	= pxa3xx_slave_map,
-	.slave_map_cnt	= ARRAY_SIZE(pxa3xx_slave_map),
-};
-
 static int __init pxa3xx_init(void)
 {
 	int ret = 0;
 
 	if (cpu_is_pxa3xx()) {
 
-		reset_status = ARSR;
+		pxa_register_wdt(ARSR);
 
 		/*
 		 * clear RDH bit every time after reset
@@ -488,20 +426,6 @@ static int __init pxa3xx_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
-
-		if (of_have_populated_dt())
-			return 0;
-
-		pxa2xx_set_dmac_info(&pxa3xx_dma_pdata);
-		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-		if (ret)
-			return ret;
-		if (cpu_is_pxa300() || cpu_is_pxa310() || cpu_is_pxa320()) {
-			platform_device_add_data(&pxa3xx_device_gpio,
-						 &pxa3xx_gpio_pdata,
-						 sizeof(pxa3xx_gpio_pdata));
-			ret = platform_device_register(&pxa3xx_device_gpio);
-		}
 	}
 
 	return ret;
diff --git a/arch/arm/mach-pxa/pxa3xx.h b/arch/arm/mach-pxa/pxa3xx.h
index 6d4502aa9d06..81825f7ad258 100644
--- a/arch/arm/mach-pxa/pxa3xx.h
+++ b/arch/arm/mach-pxa/pxa3xx.h
@@ -2,8 +2,8 @@
 #ifndef __MACH_PXA3XX_H	
 #define __MACH_PXA3XX_H
 
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "pxa3xx-regs.h"
+#include "irqs.h"
 
 #endif /* __MACH_PXA3XX_H */
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
deleted file mode 100644
index bf91de4267e5..000000000000
--- a/arch/arm/mach-pxa/pxa930.c
+++ /dev/null